Merge branch 'next' of git://github.com/kernelslacker/cpufreq
* 'next' of git://github.com/kernelslacker/cpufreq:
[CPUFREQ] db8500: support all frequencies
[CPUFREQ] db8500: remove unneeded for loop iteration over freq_table
[CPUFREQ] ARM Exynos4210 PM/Suspend compatibility with different bootloaders
[CPUFREQ] ARM: ux500: send cpufreq notification for all cpus
[CPUFREQ] e_powersaver: Allow user to lower maximum voltage
[CPUFREQ] e_powersaver: Check BIOS limit for CPU frequency
[CPUFREQ] e_powersaver: Additional checks
[CPUFREQ] exynos4210: Show list of available frequencies
diff --git a/Documentation/ABI/testing/debugfs-ideapad b/Documentation/ABI/testing/debugfs-ideapad
new file mode 100644
index 0000000..7079c0b
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-ideapad
@@ -0,0 +1,19 @@
+What: /sys/kernel/debug/ideapad/cfg
+Date: Sep 2011
+KernelVersion: 3.2
+Contact: Ike Panhc <ike.pan@canonical.com>
+Description:
+
+cfg shows the return value of _CFG method in VPC2004 device. It tells machine
+capability and what graphic component within the machine.
+
+
+What: /sys/kernel/debug/ideapad/status
+Date: Sep 2011
+KernelVersion: 3.2
+Contact: Ike Panhc <ike.pan@canonical.com>
+Description:
+
+status shows infos we can read and tells its meaning and value.
+
+
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index c1eb41c..2b5d561 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -206,3 +206,16 @@
when a discarded area is read the discard_zeroes_data
parameter will be set to one. Otherwise it will be 0 and
the result of reading a discarded area is undefined.
+What: /sys/block/<disk>/alias
+Date: Aug 2011
+Contact: Nao Nishijima <nao.nishijima.xt@hitachi.com>
+Description:
+ A raw device name of a disk does not always point a same disk
+ each boot-up time. Therefore, users have to use persistent
+ device names, which udev creates when the kernel finds a disk,
+ instead of raw device name. However, kernel doesn't show those
+ persistent names on its messages (e.g. dmesg).
+ This file can store an alias of the disk and it would be
+ appeared in kernel messages if it is set. A disk can have an
+ alias which length is up to 255bytes. Users can use alphabets,
+ numbers, "-" and "_" in alias name. This file is writeonce.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
new file mode 100644
index 0000000..82d4df1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -0,0 +1,72 @@
+What: /sys/class/hidraw/hidraw*/device/speed
+Date: April 2010
+Kernel Version: 2.6.35
+Contact: linux-bluetooth@vger.kernel.org
+Description:
+ The /sys/class/hidraw/hidraw*/device/speed file controls
+ reporting speed of Wacom bluetooth tablet. Reading from
+ this file returns 1 if tablet reports in high speed mode
+ or 0 otherwise. Writing to this file one of these values
+ switches reporting speed.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Attribute group for control of the status LEDs and the OLEDs.
+ This attribute group is only available for Intuos 4 M, L,
+ and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
+ Therefore its presence implicitly signifies the presence of
+ said LEDs and OLEDs on the tablet device.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets the status LED luminance (1..127)
+ when the stylus does not touch the tablet surface, and no
+ button is pressed on the stylus. This luminance level is
+ normally lower than the level when a button is pressed.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets the status LED luminance (1..127)
+ when the stylus touches the tablet surface, or any button is
+ pressed on the stylus.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets which one of the four (for Intuos 4)
+ or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
+ The other three LEDs on the same side are always inactive.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
+Date: September 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets which one of the left four (for Cintiq 21UX2)
+ status LEDs is active (0..3). The other three LEDs on the left are always
+ inactive.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets the overall luminance level (0..15)
+ of all eight button OLED displays.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ When writing a 1024 byte raw image in Wacom Intuos 4
+ interleaving format to the file, the image shows up on Button N
+ of the device. The image is a 64x32 pixel 4-bit gray image. The
+ 1024 byte binary is split up into 16x 64 byte chunks. Each 64
+ byte chunk encodes the image data for two consecutive lines on
+ the display. The low nibble of each byte contains the first
+ line, and the high nibble contains the second line.
diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
index ff53183..814b013 100644
--- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
@@ -5,19 +5,4 @@
Description:
Control the power of camera module. 1 means on, 0 means off.
-What: /sys/devices/platform/ideapad/cfg
-Date: Jun 2011
-KernelVersion: 3.1
-Contact: "Ike Panhc <ike.pan@canonical.com>"
-Description:
- Ideapad capability bits.
- Bit 8-10: 1 - Intel graphic only
- 2 - ATI graphic only
- 3 - Nvidia graphic only
- 4 - Intel and ATI graphic
- 5 - Intel and Nvidia graphic
- Bit 16: Bluetooth exist (1 for exist)
- Bit 17: 3G exist (1 for exist)
- Bit 18: Wifi exist (1 for exist)
- Bit 19: Camera exist (1 for exist)
diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom
deleted file mode 100644
index 1517976..0000000
--- a/Documentation/ABI/testing/sysfs-wacom
+++ /dev/null
@@ -1,10 +0,0 @@
-What: /sys/class/hidraw/hidraw*/device/speed
-Date: April 2010
-Kernel Version: 2.6.35
-Contact: linux-bluetooth@vger.kernel.org
-Description:
- The /sys/class/hidraw/hidraw*/device/speed file controls
- reporting speed of wacom bluetooth tablet. Reading from
- this file returns 1 if tablet reports in high speed mode
- or 0 otherwise. Writing to this file one of these values
- switches reporting speed.
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index fe23269..66bd97a 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -50,6 +50,13 @@
implementation may choose to ignore flags that affect the location of
the returned memory, like GFP_DMA).
+void *
+dma_zalloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+
+Wraps dma_alloc_coherent() and also zeroes the returned memory if the
+allocation attempt succeeded.
+
void
dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_handle)
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
index 207e1a5..3bc8a61 100644
--- a/Documentation/DocBook/media/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -352,6 +352,7 @@
SYS_CMMB,
SYS_DAB,
SYS_DVBT2,
+ SYS_TURBO,
} fe_delivery_system_t;
</programlisting>
</section>
@@ -809,6 +810,8 @@
<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+ <listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
+ <listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem>
</itemizedlist>
<para>Future implementations might add those two missing parameters:</para>
<itemizedlist mark='opencircle'>
@@ -818,25 +821,18 @@
</section>
<section id="dvbs2-params">
<title>DVB-S2 delivery system</title>
- <para>The following parameters are valid for DVB-S2:</para>
+ <para>In addition to all parameters valid for DVB-S, DVB-S2 supports the following parameters:</para>
<itemizedlist mark='opencircle'>
- <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem>
+ <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
<listitem><para><link linkend="DTV-PILOT"><constant>DTV_PILOT</constant></link></para></listitem>
<listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem>
</itemizedlist>
- <para>Future implementations might add those two missing parameters:</para>
+ </section>
+ <section id="turbo-params">
+ <title>Turbo code delivery system</title>
+ <para>In addition to all parameters valid for DVB-S, turbo code supports the following parameters:</para>
<itemizedlist mark='opencircle'>
- <listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
- <listitem><para><link linkend="DTV-DISEQC-SLAVE-REPLY"><constant>DTV_DISEQC_SLAVE_REPLY</constant></link></para></listitem>
+ <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
</itemizedlist>
</section>
<section id="isdbs-params">
diff --git a/Documentation/DocBook/media/dvb/intro.xml b/Documentation/DocBook/media/dvb/intro.xml
index c75dc7c..170064a 100644
--- a/Documentation/DocBook/media/dvb/intro.xml
+++ b/Documentation/DocBook/media/dvb/intro.xml
@@ -205,7 +205,7 @@
additional include file <emphasis
role="tt">linux/dvb/version.h</emphasis> exists, which defines the
constant <emphasis role="tt">DVB_API_VERSION</emphasis>. This document
-describes <emphasis role="tt">DVB_API_VERSION 3</emphasis>.
+describes <emphasis role="tt">DVB_API_VERSION 5.4</emphasis>.
</para>
</section>
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index ce1004a..91410b6 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2370,6 +2370,14 @@
</listitem>
</orderedlist>
</section>
+ <section>
+ <title>V4L2 in Linux 3.2</title>
+ <orderedlist>
+ <listitem>
+ <para>V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace.</para>
+ </listitem>
+ </orderedlist>
+ </section>
<section id="other">
<title>Relation of V4L2 to other Linux multimedia APIs</title>
diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml
index 05c8fef..0916a73 100644
--- a/Documentation/DocBook/media/v4l/dev-subdev.xml
+++ b/Documentation/DocBook/media/v4l/dev-subdev.xml
@@ -266,7 +266,7 @@
<para>When satisfied with the try results, applications can set the active
formats by setting the <structfield>which</structfield> argument to
- <constant>V4L2_SUBDEV_FORMAT_TRY</constant>. Active formats are changed
+ <constant>V4L2_SUBDEV_FORMAT_ACTIVE</constant>. Active formats are changed
exactly as try formats by drivers. To avoid modifying the hardware state
during format negotiation, applications should negotiate try formats first
and then modify the active settings using the try formats returned during
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 0d05e87..40132c2 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -128,6 +128,13 @@
applications. -->
<revision>
+ <revnumber>3.2</revnumber>
+ <date>2011-08-26</date>
+ <authorinitials>hv</authorinitials>
+ <revremark>Added V4L2_CTRL_FLAG_VOLATILE.</revremark>
+ </revision>
+
+ <revision>
<revnumber>3.1</revnumber>
<date>2011-06-27</date>
<authorinitials>mcc, po, hv</authorinitials>
@@ -410,7 +417,7 @@
</partinfo>
<title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.1</subtitle>
+ <subtitle>Revision 3.2</subtitle>
<chapter id="common">
&sub-common;
diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
index 7769642..e8714aa 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
@@ -88,6 +88,12 @@
</row>
<row>
<entry></entry>
+ <entry>&v4l2-event-frame-sync;</entry>
+ <entry><structfield>frame</structfield></entry>
+ <entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
+ </row>
+ <row>
+ <entry></entry>
<entry>__u8</entry>
<entry><structfield>data</structfield>[64]</entry>
<entry>Event data. Defined by the event type. The union
@@ -135,6 +141,129 @@
</tgroup>
</table>
+ <table frame="none" pgwide="1" id="v4l2-event-vsync">
+ <title>struct <structname>v4l2_event_vsync</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>field</structfield></entry>
+ <entry>The upcoming field. See &v4l2-field;.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table frame="none" pgwide="1" id="v4l2-event-ctrl">
+ <title>struct <structname>v4l2_event_ctrl</structname></title>
+ <tgroup cols="4">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>changes</structfield></entry>
+ <entry></entry>
+ <entry>A bitmask that tells what has changed. See <xref linkend="changes-flags" />.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>type</structfield></entry>
+ <entry></entry>
+ <entry>The type of the control. See &v4l2-ctrl-type;.</entry>
+ </row>
+ <row>
+ <entry>union (anonymous)</entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry></entry>
+ <entry>__s32</entry>
+ <entry><structfield>value</structfield></entry>
+ <entry>The 32-bit value of the control for 32-bit control types.
+ This is 0 for string controls since the value of a string
+ cannot be passed using &VIDIOC-DQEVENT;.</entry>
+ </row>
+ <row>
+ <entry></entry>
+ <entry>__s64</entry>
+ <entry><structfield>value64</structfield></entry>
+ <entry>The 64-bit value of the control for 64-bit control types.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>flags</structfield></entry>
+ <entry></entry>
+ <entry>The control flags. See <xref linkend="control-flags" />.</entry>
+ </row>
+ <row>
+ <entry>__s32</entry>
+ <entry><structfield>minimum</structfield></entry>
+ <entry></entry>
+ <entry>The minimum value of the control. See &v4l2-queryctrl;.</entry>
+ </row>
+ <row>
+ <entry>__s32</entry>
+ <entry><structfield>maximum</structfield></entry>
+ <entry></entry>
+ <entry>The maximum value of the control. See &v4l2-queryctrl;.</entry>
+ </row>
+ <row>
+ <entry>__s32</entry>
+ <entry><structfield>step</structfield></entry>
+ <entry></entry>
+ <entry>The step value of the control. See &v4l2-queryctrl;.</entry>
+ </row>
+ <row>
+ <entry>__s32</entry>
+ <entry><structfield>default_value</structfield></entry>
+ <entry></entry>
+ <entry>The default value value of the control. See &v4l2-queryctrl;.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table frame="none" pgwide="1" id="v4l2-event-frame-sync">
+ <title>struct <structname>v4l2_event_frame_sync</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>frame_sequence</structfield></entry>
+ <entry>
+ The sequence number of the frame being received.
+ </entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table pgwide="1" frame="none" id="changes-flags">
+ <title>Changes</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>V4L2_EVENT_CTRL_CH_VALUE</constant></entry>
+ <entry>0x0001</entry>
+ <entry>This control event was triggered because the value of the control
+ changed. Special case: if a button control is pressed, then this
+ event is sent as well, even though there is not explicit value
+ associated with a button control.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_EVENT_CTRL_CH_FLAGS</constant></entry>
+ <entry>0x0002</entry>
+ <entry>This control event was triggered because the control flags
+ changed.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
</refsect1>
<refsect1>
&return-value;
diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
index 677ea64..0ac0057 100644
--- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
@@ -406,6 +406,15 @@
writing a value will cause the device to carry out a given action
(⪚ motor control) but no meaningful value can be returned.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_CTRL_FLAG_VOLATILE</constant></entry>
+ <entry>0x0080</entry>
+ <entry>This control is volatile, which means that the value of the control
+changes continuously. A typical example would be the current gain value if the device
+is in auto-gain mode. In such a case the hardware calculates the gain value based on
+the lighting conditions which can change over time. Note that setting a new value for
+a volatile control will have no effect. The new value will just be ignored.</entry>
+ </row>
</tbody>
</tgroup>
</table>
diff --git a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml
index 69c0d8a..5c70b61 100644
--- a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml
@@ -139,6 +139,22 @@
</entry>
</row>
<row>
+ <entry><constant>V4L2_EVENT_FRAME_SYNC</constant></entry>
+ <entry>4</entry>
+ <entry>
+ <para>Triggered immediately when the reception of a
+ frame has begun. This event has a
+ &v4l2-event-frame-sync; associated with it.</para>
+
+ <para>If the hardware needs to be stopped in the case of a
+ buffer underrun it might not be able to generate this event.
+ In such cases the <structfield>frame_sequence</structfield>
+ field in &v4l2-event-frame-sync; will not be incremented. This
+ causes two consecutive frame sequence numbers to have n times
+ frame interval in between them.</para>
+ </entry>
+ </row>
+ <row>
<entry><constant>V4L2_EVENT_PRIVATE_START</constant></entry>
<entry>0x08000000</entry>
<entry>Base event number for driver-private events.</entry>
@@ -183,113 +199,6 @@
</tgroup>
</table>
- <table frame="none" pgwide="1" id="v4l2-event-vsync">
- <title>struct <structname>v4l2_event_vsync</structname></title>
- <tgroup cols="3">
- &cs-str;
- <tbody valign="top">
- <row>
- <entry>__u8</entry>
- <entry><structfield>field</structfield></entry>
- <entry>The upcoming field. See &v4l2-field;.</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
-
- <table frame="none" pgwide="1" id="v4l2-event-ctrl">
- <title>struct <structname>v4l2_event_ctrl</structname></title>
- <tgroup cols="4">
- &cs-str;
- <tbody valign="top">
- <row>
- <entry>__u32</entry>
- <entry><structfield>changes</structfield></entry>
- <entry></entry>
- <entry>A bitmask that tells what has changed. See <xref linkend="changes-flags" />.</entry>
- </row>
- <row>
- <entry>__u32</entry>
- <entry><structfield>type</structfield></entry>
- <entry></entry>
- <entry>The type of the control. See &v4l2-ctrl-type;.</entry>
- </row>
- <row>
- <entry>union (anonymous)</entry>
- <entry></entry>
- <entry></entry>
- <entry></entry>
- </row>
- <row>
- <entry></entry>
- <entry>__s32</entry>
- <entry><structfield>value</structfield></entry>
- <entry>The 32-bit value of the control for 32-bit control types.
- This is 0 for string controls since the value of a string
- cannot be passed using &VIDIOC-DQEVENT;.</entry>
- </row>
- <row>
- <entry></entry>
- <entry>__s64</entry>
- <entry><structfield>value64</structfield></entry>
- <entry>The 64-bit value of the control for 64-bit control types.</entry>
- </row>
- <row>
- <entry>__u32</entry>
- <entry><structfield>flags</structfield></entry>
- <entry></entry>
- <entry>The control flags. See <xref linkend="control-flags" />.</entry>
- </row>
- <row>
- <entry>__s32</entry>
- <entry><structfield>minimum</structfield></entry>
- <entry></entry>
- <entry>The minimum value of the control. See &v4l2-queryctrl;.</entry>
- </row>
- <row>
- <entry>__s32</entry>
- <entry><structfield>maximum</structfield></entry>
- <entry></entry>
- <entry>The maximum value of the control. See &v4l2-queryctrl;.</entry>
- </row>
- <row>
- <entry>__s32</entry>
- <entry><structfield>step</structfield></entry>
- <entry></entry>
- <entry>The step value of the control. See &v4l2-queryctrl;.</entry>
- </row>
- <row>
- <entry>__s32</entry>
- <entry><structfield>default_value</structfield></entry>
- <entry></entry>
- <entry>The default value value of the control. See &v4l2-queryctrl;.</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
-
- <table pgwide="1" frame="none" id="changes-flags">
- <title>Changes</title>
- <tgroup cols="3">
- &cs-def;
- <tbody valign="top">
- <row>
- <entry><constant>V4L2_EVENT_CTRL_CH_VALUE</constant></entry>
- <entry>0x0001</entry>
- <entry>This control event was triggered because the value of the control
- changed. Special case: if a button control is pressed, then this
- event is sent as well, even though there is not explicit value
- associated with a button control.</entry>
- </row>
- <row>
- <entry><constant>V4L2_EVENT_CTRL_CH_FLAGS</constant></entry>
- <entry>0x0002</entry>
- <entry>This control event was triggered because the control flags
- changed.</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
</refsect1>
<refsect1>
&return-value;
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 598c22f..5de23c0 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -4288,7 +4288,7 @@
<![CDATA[
struct snd_rawmidi *rmidi;
snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
- irq, irq_flags, &rmidi);
+ irq, &rmidi);
]]>
</programlisting>
</informalexample>
@@ -4343,6 +4343,13 @@
by itself to start processing the output stream in the irq handler.
</para>
+ <para>
+ If the MPU-401 interface shares its interrupt with the other logical
+ devices on the card, set <constant>MPU401_INFO_IRQ_HOOK</constant>
+ (see <link linkend="midi-interface-interrupt-handler"><citetitle>
+ below</citetitle></link>).
+ </para>
+
<para>
Usually, the port address corresponds to the command port and
port + 1 corresponds to the data port. If not, you may change
@@ -4375,14 +4382,12 @@
</para>
<para>
- The 6th argument specifies the irq number for UART. If the irq
- is already allocated, pass 0 to the 7th argument
- (<parameter>irq_flags</parameter>). Otherwise, pass the flags
- for irq allocation
- (<constant>SA_XXX</constant> bits) to it, and the irq will be
- reserved by the mpu401-uart layer. If the card doesn't generate
- UART interrupts, pass -1 as the irq number. Then a timer
- interrupt will be invoked for polling.
+ The 6th argument specifies the ISA irq number that will be
+ allocated. If no interrupt is to be allocated (because your
+ code is already allocating a shared interrupt, or because the
+ device does not use interrupts), pass -1 instead.
+ For a MPU-401 device without an interrupt, a polling timer
+ will be used instead.
</para>
</section>
@@ -4390,12 +4395,13 @@
<title>Interrupt Handler</title>
<para>
When the interrupt is allocated in
- <function>snd_mpu401_uart_new()</function>, the private
- interrupt handler is used, hence you don't have anything else to do
- than creating the mpu401 stuff. Otherwise, you have to call
- <function>snd_mpu401_uart_interrupt()</function> explicitly when
- a UART interrupt is invoked and checked in your own interrupt
- handler.
+ <function>snd_mpu401_uart_new()</function>, an exclusive ISA
+ interrupt handler is automatically used, hence you don't have
+ anything else to do than creating the mpu401 stuff. Otherwise, you
+ have to set <constant>MPU401_INFO_IRQ_HOOK</constant>, and call
+ <function>snd_mpu401_uart_interrupt()</function> explicitly from your
+ own interrupt handler when it has determined that a UART interrupt
+ has occurred.
</para>
<para>
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 06eb6d9..cc0ebc5 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -418,7 +418,6 @@
# The following additional stats are dependent on CONFIG_DEBUG_VM.
-inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
diff --git a/Documentation/device-mapper/dm-log.txt b/Documentation/device-mapper/dm-log.txt
index 994dd75..c155ac5 100644
--- a/Documentation/device-mapper/dm-log.txt
+++ b/Documentation/device-mapper/dm-log.txt
@@ -48,7 +48,7 @@
communication.
There are currently two userspace log implementations that leverage this
-framework - "clustered_disk" and "clustered_core". These implementations
+framework - "clustered-disk" and "clustered-core". These implementations
provide a cluster-coherent log for shared-storage. Device-mapper mirroring
can be used in a shared-storage environment when the cluster log implementations
are employed.
diff --git a/Documentation/device-mapper/persistent-data.txt b/Documentation/device-mapper/persistent-data.txt
new file mode 100644
index 0000000..0e5df9b
--- /dev/null
+++ b/Documentation/device-mapper/persistent-data.txt
@@ -0,0 +1,84 @@
+Introduction
+============
+
+The more-sophisticated device-mapper targets require complex metadata
+that is managed in kernel. In late 2010 we were seeing that various
+different targets were rolling their own data strutures, for example:
+
+- Mikulas Patocka's multisnap implementation
+- Heinz Mauelshagen's thin provisioning target
+- Another btree-based caching target posted to dm-devel
+- Another multi-snapshot target based on a design of Daniel Phillips
+
+Maintaining these data structures takes a lot of work, so if possible
+we'd like to reduce the number.
+
+The persistent-data library is an attempt to provide a re-usable
+framework for people who want to store metadata in device-mapper
+targets. It's currently used by the thin-provisioning target and an
+upcoming hierarchical storage target.
+
+Overview
+========
+
+The main documentation is in the header files which can all be found
+under drivers/md/persistent-data.
+
+The block manager
+-----------------
+
+dm-block-manager.[hc]
+
+This provides access to the data on disk in fixed sized-blocks. There
+is a read/write locking interface to prevent concurrent accesses, and
+keep data that is being used in the cache.
+
+Clients of persistent-data are unlikely to use this directly.
+
+The transaction manager
+-----------------------
+
+dm-transaction-manager.[hc]
+
+This restricts access to blocks and enforces copy-on-write semantics.
+The only way you can get hold of a writable block through the
+transaction manager is by shadowing an existing block (ie. doing
+copy-on-write) or allocating a fresh one. Shadowing is elided within
+the same transaction so performance is reasonable. The commit method
+ensures that all data is flushed before it writes the superblock.
+On power failure your metadata will be as it was when last committed.
+
+The Space Maps
+--------------
+
+dm-space-map.h
+dm-space-map-metadata.[hc]
+dm-space-map-disk.[hc]
+
+On-disk data structures that keep track of reference counts of blocks.
+Also acts as the allocator of new blocks. Currently two
+implementations: a simpler one for managing blocks on a different
+device (eg. thinly-provisioned data blocks); and one for managing
+the metadata space. The latter is complicated by the need to store
+its own data within the space it's managing.
+
+The data structures
+-------------------
+
+dm-btree.[hc]
+dm-btree-remove.c
+dm-btree-spine.c
+dm-btree-internal.h
+
+Currently there is only one data structure, a hierarchical btree.
+There are plans to add more. For example, something with an
+array-like interface would see a lot of use.
+
+The btree is 'hierarchical' in that you can define it to be composed
+of nested btrees, and take multiple keys. For example, the
+thin-provisioning target uses a btree with two levels of nesting.
+The first maps a device id to a mapping tree, and that in turn maps a
+virtual block to a physical block.
+
+Values stored in the btrees can have arbitrary size. Keys are always
+64bits, although nesting allows you to use multiple keys.
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
new file mode 100644
index 0000000..801d9d1
--- /dev/null
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -0,0 +1,285 @@
+Introduction
+============
+
+This document descibes a collection of device-mapper targets that
+between them implement thin-provisioning and snapshots.
+
+The main highlight of this implementation, compared to the previous
+implementation of snapshots, is that it allows many virtual devices to
+be stored on the same data volume. This simplifies administration and
+allows the sharing of data between volumes, thus reducing disk usage.
+
+Another significant feature is support for an arbitrary depth of
+recursive snapshots (snapshots of snapshots of snapshots ...). The
+previous implementation of snapshots did this by chaining together
+lookup tables, and so performance was O(depth). This new
+implementation uses a single data structure to avoid this degradation
+with depth. Fragmentation may still be an issue, however, in some
+scenarios.
+
+Metadata is stored on a separate device from data, giving the
+administrator some freedom, for example to:
+
+- Improve metadata resilience by storing metadata on a mirrored volume
+ but data on a non-mirrored one.
+
+- Improve performance by storing the metadata on SSD.
+
+Status
+======
+
+These targets are very much still in the EXPERIMENTAL state. Please
+do not yet rely on them in production. But do experiment and offer us
+feedback. Different use cases will have different performance
+characteristics, for example due to fragmentation of the data volume.
+
+If you find this software is not performing as expected please mail
+dm-devel@redhat.com with details and we'll try our best to improve
+things for you.
+
+Userspace tools for checking and repairing the metadata are under
+development.
+
+Cookbook
+========
+
+This section describes some quick recipes for using thin provisioning.
+They use the dmsetup program to control the device-mapper driver
+directly. End users will be advised to use a higher-level volume
+manager such as LVM2 once support has been added.
+
+Pool device
+-----------
+
+The pool device ties together the metadata volume and the data volume.
+It maps I/O linearly to the data volume and updates the metadata via
+two mechanisms:
+
+- Function calls from the thin targets
+
+- Device-mapper 'messages' from userspace which control the creation of new
+ virtual devices amongst other things.
+
+Setting up a fresh pool device
+------------------------------
+
+Setting up a pool device requires a valid metadata device, and a
+data device. If you do not have an existing metadata device you can
+make one by zeroing the first 4k to indicate empty metadata.
+
+ dd if=/dev/zero of=$metadata_dev bs=4096 count=1
+
+The amount of metadata you need will vary according to how many blocks
+are shared between thin devices (i.e. through snapshots). If you have
+less sharing than average you'll need a larger-than-average metadata device.
+
+As a guide, we suggest you calculate the number of bytes to use in the
+metadata device as 48 * $data_dev_size / $data_block_size but round it up
+to 2MB if the answer is smaller. The largest size supported is 16GB.
+
+If you're creating large numbers of snapshots which are recording large
+amounts of change, you may need find you need to increase this.
+
+Reloading a pool table
+----------------------
+
+You may reload a pool's table, indeed this is how the pool is resized
+if it runs out of space. (N.B. While specifying a different metadata
+device when reloading is not forbidden at the moment, things will go
+wrong if it does not route I/O to exactly the same on-disk location as
+previously.)
+
+Using an existing pool device
+-----------------------------
+
+ dmsetup create pool \
+ --table "0 20971520 thin-pool $metadata_dev $data_dev \
+ $data_block_size $low_water_mark"
+
+$data_block_size gives the smallest unit of disk space that can be
+allocated at a time expressed in units of 512-byte sectors. People
+primarily interested in thin provisioning may want to use a value such
+as 1024 (512KB). People doing lots of snapshotting may want a smaller value
+such as 128 (64KB). If you are not zeroing newly-allocated data,
+a larger $data_block_size in the region of 256000 (128MB) is suggested.
+$data_block_size must be the same for the lifetime of the
+metadata device.
+
+$low_water_mark is expressed in blocks of size $data_block_size. If
+free space on the data device drops below this level then a dm event
+will be triggered which a userspace daemon should catch allowing it to
+extend the pool device. Only one such event will be sent.
+Resuming a device with a new table itself triggers an event so the
+userspace daemon can use this to detect a situation where a new table
+already exceeds the threshold.
+
+Thin provisioning
+-----------------
+
+i) Creating a new thinly-provisioned volume.
+
+ To create a new thinly- provisioned volume you must send a message to an
+ active pool device, /dev/mapper/pool in this example.
+
+ dmsetup message /dev/mapper/pool 0 "create_thin 0"
+
+ Here '0' is an identifier for the volume, a 24-bit number. It's up
+ to the caller to allocate and manage these identifiers. If the
+ identifier is already in use, the message will fail with -EEXIST.
+
+ii) Using a thinly-provisioned volume.
+
+ Thinly-provisioned volumes are activated using the 'thin' target:
+
+ dmsetup create thin --table "0 2097152 thin /dev/mapper/pool 0"
+
+ The last parameter is the identifier for the thinp device.
+
+Internal snapshots
+------------------
+
+i) Creating an internal snapshot.
+
+ Snapshots are created with another message to the pool.
+
+ N.B. If the origin device that you wish to snapshot is active, you
+ must suspend it before creating the snapshot to avoid corruption.
+ This is NOT enforced at the moment, so please be careful!
+
+ dmsetup suspend /dev/mapper/thin
+ dmsetup message /dev/mapper/pool 0 "create_snap 1 0"
+ dmsetup resume /dev/mapper/thin
+
+ Here '1' is the identifier for the volume, a 24-bit number. '0' is the
+ identifier for the origin device.
+
+ii) Using an internal snapshot.
+
+ Once created, the user doesn't have to worry about any connection
+ between the origin and the snapshot. Indeed the snapshot is no
+ different from any other thinly-provisioned device and can be
+ snapshotted itself via the same method. It's perfectly legal to
+ have only one of them active, and there's no ordering requirement on
+ activating or removing them both. (This differs from conventional
+ device-mapper snapshots.)
+
+ Activate it exactly the same way as any other thinly-provisioned volume:
+
+ dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 1"
+
+Deactivation
+------------
+
+All devices using a pool must be deactivated before the pool itself
+can be.
+
+ dmsetup remove thin
+ dmsetup remove snap
+ dmsetup remove pool
+
+Reference
+=========
+
+'thin-pool' target
+------------------
+
+i) Constructor
+
+ thin-pool <metadata dev> <data dev> <data block size (sectors)> \
+ <low water mark (blocks)> [<number of feature args> [<arg>]*]
+
+ Optional feature arguments:
+ - 'skip_block_zeroing': skips the zeroing of newly-provisioned blocks.
+
+ Data block size must be between 64KB (128 sectors) and 1GB
+ (2097152 sectors) inclusive.
+
+
+ii) Status
+
+ <transaction id> <used metadata blocks>/<total metadata blocks>
+ <used data blocks>/<total data blocks> <held metadata root>
+
+
+ transaction id:
+ A 64-bit number used by userspace to help synchronise with metadata
+ from volume managers.
+
+ used data blocks / total data blocks
+ If the number of free blocks drops below the pool's low water mark a
+ dm event will be sent to userspace. This event is edge-triggered and
+ it will occur only once after each resume so volume manager writers
+ should register for the event and then check the target's status.
+
+ held metadata root:
+ The location, in sectors, of the metadata root that has been
+ 'held' for userspace read access. '-' indicates there is no
+ held root. This feature is not yet implemented so '-' is
+ always returned.
+
+iii) Messages
+
+ create_thin <dev id>
+
+ Create a new thinly-provisioned device.
+ <dev id> is an arbitrary unique 24-bit identifier chosen by
+ the caller.
+
+ create_snap <dev id> <origin id>
+
+ Create a new snapshot of another thinly-provisioned device.
+ <dev id> is an arbitrary unique 24-bit identifier chosen by
+ the caller.
+ <origin id> is the identifier of the thinly-provisioned device
+ of which the new device will be a snapshot.
+
+ delete <dev id>
+
+ Deletes a thin device. Irreversible.
+
+ trim <dev id> <new size in sectors>
+
+ Delete mappings from the end of a thin device. Irreversible.
+ You might want to use this if you're reducing the size of
+ your thinly-provisioned device. In many cases, due to the
+ sharing of blocks between devices, it is not possible to
+ determine in advance how much space 'trim' will release. (In
+ future a userspace tool might be able to perform this
+ calculation.)
+
+ set_transaction_id <current id> <new id>
+
+ Userland volume managers, such as LVM, need a way to
+ synchronise their external metadata with the internal metadata of the
+ pool target. The thin-pool target offers to store an
+ arbitrary 64-bit transaction id and return it on the target's
+ status line. To avoid races you must provide what you think
+ the current transaction id is when you change it with this
+ compare-and-swap message.
+
+'thin' target
+-------------
+
+i) Constructor
+
+ thin <pool dev> <dev id>
+
+ pool dev:
+ the thin-pool device, e.g. /dev/mapper/my_pool or 253:0
+
+ dev id:
+ the internal device identifier of the device to be
+ activated.
+
+The pool doesn't store any size against the thin devices. If you
+load a thin target that is smaller than you've been using previously,
+then you'll have no access to blocks mapped beyond the end. If you
+load a target that is bigger than before, then extra blocks will be
+provisioned as and when needed.
+
+If you wish to reduce the size of your thin device and potentially
+regain some space then send the 'trim' message to the pool.
+
+ii) Status
+
+ <nr mapped sectors> <highest mapped sector>
diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt
new file mode 100644
index 0000000..4755caa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda.txt
@@ -0,0 +1,8 @@
+Calxeda Highbank Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
+properties.
+
+Required root node properties:
+ - compatible = "calxeda,highbank";
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
new file mode 100644
index 0000000..c9848ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -0,0 +1,26 @@
+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+i.MX51 Babbage Board
+Required root node properties:
+ - compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+i.MX53 Automotive Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-ard", "fsl,imx53";
+
+i.MX53 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx53-evk", "fsl,imx53";
+
+i.MX53 Quick Start Board
+Required root node properties:
+ - compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+i.MX53 Smart Mobile Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-smd", "fsl,imx53";
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
new file mode 100644
index 0000000..52916b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -0,0 +1,55 @@
+* ARM Generic Interrupt Controller
+
+ARM SMP cores are often associated with a GIC, providing per processor
+interrupts (PPI), shared processor interrupts (SPI) and software
+generated interrupts (SGI).
+
+Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+Secondary GICs are cascaded into the upward interrupt controller and do not
+have PPIs or SGIs.
+
+Main node required properties:
+
+- compatible : should be one of:
+ "arm,cortex-a9-gic"
+ "arm,arm11mp-gic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 3.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
+ the 8 possible cpus attached to the GIC. A bit set to '1' indicated
+ the interrupt is wired to that CPU. Only valid for PPI interrupts.
+
+- reg : Specifies base physical address(s) and size of the GIC registers. The
+ first region is the GIC distributor register base and size. The 2nd region is
+ the GIC cpu interface register base and size.
+
+Optional
+- interrupts : Interrupt source of the parent interrupt controller. Only
+ present on secondary GICs.
+
+Example:
+
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
diff --git a/Documentation/devicetree/bindings/arm/omap/dsp.txt b/Documentation/devicetree/bindings/arm/omap/dsp.txt
new file mode 100644
index 0000000..d3830a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dsp.txt
@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/iva.txt b/Documentation/devicetree/bindings/arm/omap/iva.txt
new file mode 100644
index 0000000..6d62951
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/iva.txt
@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+ - "ti,ivahd" for OMAP4
+ - "ti,iva2.2" for OMAP3
+ - "ti,iva2.1" for OMAP2430
+ - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+ compatible = "ti,ivahd", "ti,iva";
+ ti,hwmods = "iva";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
new file mode 100644
index 0000000..6888a5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -0,0 +1,19 @@
+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+ Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
new file mode 100644
index 0000000..1a5a42c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -0,0 +1,27 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+ Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
new file mode 100644
index 0000000..dbdab40
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -0,0 +1,43 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+ form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+ HW documentation, attached to a device. Must contain at least
+ one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+ during suspend.
+
+
+Example:
+
+spinlock@1 {
+ compatible = "ti,omap4-spinlock";
+ ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+ compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+ compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+ compatible = "ti,omap4-panda", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/arm/picoxcell.txt b/Documentation/devicetree/bindings/arm/picoxcell.txt
new file mode 100644
index 0000000..e75c0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/picoxcell.txt
@@ -0,0 +1,24 @@
+Picochip picoXcell device tree bindings.
+========================================
+
+Required root node properties:
+ - compatible:
+ - "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
+ - "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
+ - "picochip,pc3x3" : picoXcell PC3X3 device based board.
+ - "picochip,pc3x2" : picoXcell PC3X2 device based board.
+
+Timers required properties:
+ - compatible = "picochip,pc3x2-timer"
+ - interrupts : The single IRQ line for the timer.
+ - clock-freq : The frequency in HZ of the timer.
+ - reg : The register bank for the timer.
+
+Note: two timers are required - one for the scheduler clock and one for the
+event tick/NOHZ.
+
+VIC required properties:
+ - compatible = "arm,pl192-vic".
+ - interrupt-controller.
+ - reg : The register bank for the device.
+ - #interrupt-cells : Must be 1.
diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
index 1d5d7a8..951ca46 100644
--- a/Documentation/devicetree/bindings/arm/primecell.txt
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -6,7 +6,9 @@
Required properties:
-- compatible : should be a specific value for peripheral and "arm,primecell"
+- compatible : should be a specific name for the peripheral and
+ "arm,primecell". The specific name will match the ARM
+ engineering name for the logic block in the form: "arm,pl???"
Optional properties:
diff --git a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
new file mode 100644
index 0000000..d8609ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
@@ -0,0 +1,23 @@
+Picochip picoXcell SPAcc (Security Protocol Accelerator) bindings
+
+Picochip picoXcell devices contain crypto offload engines that may be used for
+IPSEC and femtocell layer 2 ciphering.
+
+Required properties:
+ - compatible : "picochip,spacc-ipsec" for the IPSEC offload engine
+ "picochip,spacc-l2" for the femtocell layer 2 ciphering engine.
+ - reg : Offset and length of the register set for this device
+ - interrupt-parent : The interrupt controller that controls the SPAcc
+ interrupt.
+ - interrupts : The interrupt line from the SPAcc.
+ - ref-clock : The input clock that drives the SPAcc.
+
+Example SPAcc node:
+
+spacc@10000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&ipsec_clk>, "ref";
+};
diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.txt b/Documentation/devicetree/bindings/gpio/pl061-gpio.txt
new file mode 100644
index 0000000..a2c416b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.txt
@@ -0,0 +1,10 @@
+ARM PL061 GPIO controller
+
+Required properties:
+- compatible : "arm,pl061", "arm,primecell"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt mapping for GPIO IRQ.
+
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 0000000..f3cf43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+ The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c@83fc4000 { /* I2C2 on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+};
+
+i2c@70038000 { /* HS-I2C on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x70038000 0x4000>;
+ interrupts = <64>;
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
new file mode 100644
index 0000000..38832c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
@@ -0,0 +1,39 @@
+* Samsung's I2C controller
+
+The Samsung's I2C controller is used to interface with I2C devices.
+
+Required properties:
+ - compatible: value should be either of the following.
+ (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
+ (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller.
+
+Optional properties:
+ - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+ specified, default value is 0.
+ - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
+ specified, the default value in Hz is 100000.
+
+Example:
+
+ i2c@13870000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <345>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ gpios = <&gpd1 2 0 /* SDA */
+ &gpd1 3 0 /* SCL */>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
new file mode 100644
index 0000000..7e51154
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
@@ -0,0 +1,27 @@
+* NVIDIA Tegra Secure Digital Host Controller
+
+This controller on Tegra family SoCs provides an interface for MMC, SD,
+and SDIO types of memory cards.
+
+Required properties:
+- compatible : Should be "nvidia,<chip>-sdhci"
+- reg : Should contain SD/MMC registers location and length
+- interrupts : Should contain SD/MMC interrupt
+
+Optional properties:
+- cd-gpios : Specify GPIOs for card detection
+- wp-gpios : Specify GPIOs for write protection
+- power-gpios : Specify GPIOs for power control
+- support-8bit : Boolean, indicates if 8-bit mode should be used.
+
+Example:
+
+sdhci@c8000200 {
+ compatible = "nvidia,tegra20-sdhci";
+ reg = <0xc8000200 0x200>;
+ interrupts = <47>;
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ support-8bit;
+};
diff --git a/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt b/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
new file mode 100644
index 0000000..36f82dbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
@@ -0,0 +1,5 @@
+NVIDIA Tegra 2 pinmux controller
+
+Required properties:
+- compatible : "nvidia,tegra20-pinmux"
+
diff --git a/Documentation/devicetree/bindings/sound/soc/codecs/fsl-sgtl5000.txt b/Documentation/devicetree/bindings/sound/soc/codecs/fsl-sgtl5000.txt
new file mode 100644
index 0000000..2c3cd41
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/soc/codecs/fsl-sgtl5000.txt
@@ -0,0 +1,11 @@
+* Freescale SGTL5000 Stereo Codec
+
+Required properties:
+- compatible : "fsl,sgtl5000".
+
+Example:
+
+codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8510.txt b/Documentation/devicetree/bindings/sound/wm8510.txt
new file mode 100644
index 0000000..fa1a32b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8510.txt
@@ -0,0 +1,18 @@
+WM8510 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8510"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8510@1a {
+ compatible = "wlf,wm8510";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8523.txt b/Documentation/devicetree/bindings/sound/wm8523.txt
new file mode 100644
index 0000000..0474618
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8523.txt
@@ -0,0 +1,16 @@
+WM8523 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+ - compatible : "wlf,wm8523"
+
+ - reg : the I2C address of the device.
+
+Example:
+
+codec: wm8523@1a {
+ compatible = "wlf,wm8523";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8580.txt b/Documentation/devicetree/bindings/sound/wm8580.txt
new file mode 100644
index 0000000..7d9821f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8580.txt
@@ -0,0 +1,16 @@
+WM8580 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+ - compatible : "wlf,wm8580"
+
+ - reg : the I2C address of the device.
+
+Example:
+
+codec: wm8580@1a {
+ compatible = "wlf,wm8580";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8711.txt b/Documentation/devicetree/bindings/sound/wm8711.txt
new file mode 100644
index 0000000..8ed9998
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8711.txt
@@ -0,0 +1,18 @@
+WM8711 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8711"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8711@1a {
+ compatible = "wlf,wm8711";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8728.txt b/Documentation/devicetree/bindings/sound/wm8728.txt
new file mode 100644
index 0000000..a8b5c3668
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8728.txt
@@ -0,0 +1,18 @@
+WM8728 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8728"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8728@1a {
+ compatible = "wlf,wm8728";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt
new file mode 100644
index 0000000..15f7004
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8731.txt
@@ -0,0 +1,18 @@
+WM8731 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8731"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8731@1a {
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8737.txt b/Documentation/devicetree/bindings/sound/wm8737.txt
new file mode 100644
index 0000000..4bc2cea
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8737.txt
@@ -0,0 +1,18 @@
+WM8737 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8737"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8737@1a {
+ compatible = "wlf,wm8737";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8741.txt b/Documentation/devicetree/bindings/sound/wm8741.txt
new file mode 100644
index 0000000..74bda58
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8741.txt
@@ -0,0 +1,18 @@
+WM8741 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8741"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8741@1a {
+ compatible = "wlf,wm8741";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8750.txt b/Documentation/devicetree/bindings/sound/wm8750.txt
new file mode 100644
index 0000000..8db239f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8750.txt
@@ -0,0 +1,18 @@
+WM8750 and WM8987 audio CODECs
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8750" or "wlf,wm8987"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8750@1a {
+ compatible = "wlf,wm8750";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8753.txt b/Documentation/devicetree/bindings/sound/wm8753.txt
new file mode 100644
index 0000000..e65277a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8753.txt
@@ -0,0 +1,18 @@
+WM8753 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8753"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8737@1a {
+ compatible = "wlf,wm8753";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8770.txt b/Documentation/devicetree/bindings/sound/wm8770.txt
new file mode 100644
index 0000000..866e00c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8770.txt
@@ -0,0 +1,16 @@
+WM8770 audio CODEC
+
+This device supports SPI.
+
+Required properties:
+
+ - compatible : "wlf,wm8770"
+
+ - reg : the chip select number.
+
+Example:
+
+codec: wm8770@1 {
+ compatible = "wlf,wm8770";
+ reg = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8776.txt b/Documentation/devicetree/bindings/sound/wm8776.txt
new file mode 100644
index 0000000..3b9ca49
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8776.txt
@@ -0,0 +1,18 @@
+WM8776 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8776"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8776@1a {
+ compatible = "wlf,wm8776";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8804.txt b/Documentation/devicetree/bindings/sound/wm8804.txt
new file mode 100644
index 0000000..4d3a56f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8804.txt
@@ -0,0 +1,18 @@
+WM8804 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8804"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8804@1a {
+ compatible = "wlf,wm8804";
+ reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
new file mode 100644
index 0000000..306ec3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt
@@ -0,0 +1,12 @@
+ARM PL022 SPI controller
+
+Required properties:
+- compatible : "arm,pl022", "arm,primecell"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+
+Optional properties:
+- cs-gpios : should specify GPIOs used for chipselects.
+ The gpios will be referred to as reg = <index> in the SPI child nodes.
+ If unspecified, a single SPI device without a chip select can be used.
+
diff --git a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
new file mode 100644
index 0000000..aef383e
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
@@ -0,0 +1,27 @@
+* Qualcomm MSM UART
+
+Required properties:
+- compatible :
+ - "qcom,msm-uart", and one of "qcom,msm-hsuart" or
+ "qcom,msm-lsuart".
+- reg : offset and length of the register set for the device
+ for the hsuart operating in compatible mode, there should be a
+ second pair describing the gsbi registers.
+- interrupts : should contain the uart interrupt.
+
+There are two different UART blocks used in MSM devices,
+"qcom,msm-hsuart" and "qcom,msm-lsuart". The msm-serial driver is
+able to handle both of these, and matches against the "qcom,msm-uart"
+as the compatibility.
+
+The registers for the "qcom,msm-hsuart" device need to specify both
+register blocks, even for the common driver.
+
+Example:
+
+ uart@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
new file mode 100644
index 0000000..e855278
--- /dev/null
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -0,0 +1,40 @@
+Device tree binding vendor prefix registry. Keep list in alphabetical order.
+
+This isn't an exhaustive list, but you should add new prefixes to it before
+using them to avoid name-space collisions.
+
+adi Analog Devices, Inc.
+amcc Applied Micro Circuits Corporation (APM, formally AMCC)
+apm Applied Micro Circuits Corporation (APM)
+arm ARM Ltd.
+atmel Atmel Corporation
+chrp Common Hardware Reference Platform
+dallas Maxim Integrated Products (formerly Dallas Semiconductor)
+denx Denx Software Engineering
+epson Seiko Epson Corp.
+est ESTeem Wireless Modems
+fsl Freescale Semiconductor
+GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+hp Hewlett Packard
+ibm International Business Machines (IBM)
+idt Integrated Device Technologies, Inc.
+intercontrol Inter Control Group
+linux Linux-specific binding
+marvell Marvell Technology Group Ltd.
+maxim Maxim Integrated Products
+mosaixtech Mosaix Technologies, Inc.
+national National Semiconductor
+nintendo Nintendo
+nvidia NVIDIA
+nxp NXP Semiconductors
+powervr Imagination Technologies
+qcom Qualcomm, Inc.
+ramtron Ramtron International
+samsung Samsung Semiconductor
+schindler Schindler
+simtek
+sirf SiRF Technology, Inc.
+stericsson ST-Ericsson
+ti Texas Instruments
+xlnx Xilinx
diff --git a/Documentation/devicetree/bindings/virtio/mmio.txt b/Documentation/devicetree/bindings/virtio/mmio.txt
new file mode 100644
index 0000000..5069c1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/mmio.txt
@@ -0,0 +1,17 @@
+* virtio memory mapped device
+
+See http://ozlabs.org/~rusty/virtio-spec/ for more details.
+
+Required properties:
+
+- compatible: "virtio,mmio" compatibility string
+- reg: control registers base address and size including configuration space
+- interrupts: interrupt generated by the device
+
+Example:
+
+ virtio_block@3000 {
+ compatible = "virtio,mmio";
+ reg = <0x3000 0x100>;
+ interrupts = <41>;
+ }
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index c466f58..e67be7a 100755
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -27,7 +27,8 @@
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
- "lme2510c_s7395_old", "drxk", "drxk_terratec_h5");
+ "lme2510c_s7395_old", "drxk", "drxk_terratec_h5", "tda10071",
+ "it9135" );
# Check args
syntax() if (scalar(@ARGV) != 1);
@@ -575,19 +576,10 @@
}
sub az6027{
- my $file = "AZ6027_Linux_Driver.tar.gz";
- my $url = "http://linux.terratec.de/files/$file";
my $firmware = "dvb-usb-az6027-03.fw";
+ my $url = "http://linux.terratec.de/files/TERRATEC_S7/$firmware";
- wgetfile($file, $url);
-
- #untar
- if( system("tar xzvf $file $firmware")){
- die "failed to untar firmware";
- }
- if( system("rm $file")){
- die ("unable to remove unnecessary files");
- }
+ wgetfile($firmware, $url);
$firmware;
}
@@ -665,6 +657,41 @@
"$fwfile"
}
+sub it9135 {
+ my $url = "http://kworld.server261.com/kworld/CD/ITE_TiVme/V1.00/";
+ my $zipfile = "Driver_V10.323.1.0412.100412.zip";
+ my $hash = "79b597dc648698ed6820845c0c9d0d37";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
+ my $drvfile = "Driver_V10.323.1.0412.100412/Data/x86/IT9135BDA.sys";
+ my $fwfile = "dvb-usb-it9137-01.fw";
+
+ checkstandard();
+
+ wgetfile($zipfile, $url . $zipfile);
+ verify($zipfile, $hash);
+ unzip($zipfile, $tmpdir);
+ extract("$tmpdir/$drvfile", 69632, 5731, "$fwfile");
+
+ "$fwfile"
+}
+
+sub tda10071 {
+ my $sourcefile = "PCTV_460e_reference.zip";
+ my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/";
+ my $hash = "4403de903bf2593464c8d74bbc200a57";
+ my $fwfile = "dvb-fe-tda10071.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url . $sourcefile);
+ verify($sourcefile, $hash);
+ unzip($sourcefile, $tmpdir);
+ extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x67d38, 40504, $fwfile);
+
+ "$fwfile";
+}
+
# ---------------------------------------------------------------
# Utilities
diff --git a/Documentation/dvb/it9137.txt b/Documentation/dvb/it9137.txt
new file mode 100644
index 0000000..9e6726e
--- /dev/null
+++ b/Documentation/dvb/it9137.txt
@@ -0,0 +1,9 @@
+To extract firmware for Kworld UB499-2T (id 1b80:e409) you need to copy the
+following file(s) to this directory.
+
+IT9135BDA.sys Dated Mon 22 Mar 2010 02:20:08 GMT
+
+extract using dd
+dd if=IT9135BDA.sys ibs=1 skip=69632 count=5731 of=dvb-usb-it9137-01.fw
+
+copy to default firmware location.
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 82a5d25..ba4be8b 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -21,6 +21,11 @@
/sys/block/<device>/make-it-fail or
/sys/block/<device>/<partition>/make-it-fail. (generic_make_request())
+o fail_mmc_request
+
+ injects MMC data errors on devices permitted by setting
+ debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request
+
Configure fault-injection capabilities behavior
-----------------------------------------------
@@ -115,7 +120,8 @@
failslab=
fail_page_alloc=
- fail_make_request=<interval>,<probability>,<space>,<times>
+ fail_make_request=
+ mmc_core.fail_request=<interval>,<probability>,<space>,<times>
How to add new fault injection capability
-----------------------------------------
diff --git a/Documentation/fb/udlfb.txt b/Documentation/fb/udlfb.txt
index 7fdde2a..57d2f29 100644
--- a/Documentation/fb/udlfb.txt
+++ b/Documentation/fb/udlfb.txt
@@ -87,23 +87,38 @@
options, however.
From the command line, pass options to modprobe
-modprobe udlfb defio=1 console=1
+modprobe udlfb fb_defio=0 console=1 shadow=1
-Or for permanent option, create file like /etc/modprobe.d/options with text
-options udlfb defio=1 console=1
+Or modify options on the fly at /sys/module/udlfb/parameters directory via
+sudo nano fb_defio
+change the parameter in place, and save the file.
-Accepted options:
+Unplug/replug USB device to apply with new settings
+
+Or for permanent option, create file like /etc/modprobe.d/udlfb.conf with text
+options udlfb fb_defio=0 console=1 shadow=1
+
+Accepted boolean options:
fb_defio Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel
module to track changed areas of the framebuffer by page faults.
- Standard fbdev applications that use mmap but that do not
- report damage, may be able to work with this enabled.
- Disabled by default because of overhead and other issues.
+ Standard fbdev applications that use mmap but that do not
+ report damage, should be able to work with this enabled.
+ Disable when running with X server that supports reporting
+ changed regions via ioctl, as this method is simpler,
+ more stable, and higher performance.
+ default: fb_defio=1
-console Allow fbcon to attach to udlfb provided framebuffers. This
- is disabled by default because fbcon will aggressively consume
- the first framebuffer it finds, which isn't usually what the
- user wants in the case of USB displays.
+console Allow fbcon to attach to udlfb provided framebuffers.
+ Can be disabled if fbcon and other clients
+ (e.g. X with --shared-vt) are in conflict.
+ default: console=1
+
+shadow Allocate a 2nd framebuffer to shadow what's currently across
+ the USB bus in device memory. If any pixels are unchanged,
+ do not transmit. Spends host memory to save USB transfers.
+ Enabled by default. Only disable on very low memory systems.
+ default: shadow=1
Sysfs Attributes
================
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d5ac362..3d84912 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -133,41 +133,6 @@
---------------------------
-What: sys_sysctl
-When: September 2010
-Option: CONFIG_SYSCTL_SYSCALL
-Why: The same information is available in a more convenient from
- /proc/sys, and none of the sysctl variables appear to be
- important performance wise.
-
- Binary sysctls are a long standing source of subtle kernel
- bugs and security issues.
-
- When I looked several months ago all I could find after
- searching several distributions were 5 user space programs and
- glibc (which falls back to /proc/sys) using this syscall.
-
- The man page for sysctl(2) documents it as unusable for user
- space programs.
-
- sysctl(2) is not generally ABI compatible to a 32bit user
- space application on a 64bit and a 32bit kernel.
-
- For the last several months the policy has been no new binary
- sysctls and no one has put forward an argument to use them.
-
- Binary sysctls issues seem to keep happening appearing so
- properly deprecating them (with a warning to user space) and a
- 2 year grace warning period will mean eventually we can kill
- them and end the pain.
-
- In the mean time individual binary sysctls can be dealt with
- in a piecewise fashion.
-
-Who: Eric Biederman <ebiederm@xmission.com>
-
----------------------------
-
What: /proc/<pid>/oom_adj
When: August 2012
Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
@@ -495,29 +460,6 @@
----------------------------
-What: Support for UVCIOC_CTRL_ADD in the uvcvideo driver
-When: 3.2
-Why: The information passed to the driver by this ioctl is now queried
- dynamically from the device.
-Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
-----------------------------
-
-What: Support for UVCIOC_CTRL_MAP_OLD in the uvcvideo driver
-When: 3.2
-Why: Used only by applications compiled against older driver versions.
- Superseded by UVCIOC_CTRL_MAP which supports V4L2 menu controls.
-Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
-----------------------------
-
-What: Support for UVCIOC_CTRL_GET and UVCIOC_CTRL_SET in the uvcvideo driver
-When: 3.2
-Why: Superseded by the UVCIOC_CTRL_QUERY ioctl.
-Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
-----------------------------
-
What: Support for driver specific ioctls in the pwc driver (everything
defined in media/pwc-ioctl.h)
When: 3.3
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 65338079..d819ba1 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -29,6 +29,7 @@
d_compare: yes no no maybe
d_delete: no yes no no
d_release: no no yes no
+d_prune: no yes no no
d_iput: no no yes no
d_dname: no no no no
d_automount: no no yes no
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 22f3a0e..b100adc 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -73,14 +73,6 @@
also be used to enable or disable barriers, for
consistency with other ext3 mount options.
-orlov (*) This enables the new Orlov block allocator. It is
- enabled by default.
-
-oldalloc This disables the Orlov block allocator and enables
- the old block allocator. Orlov should have better
- performance - we'd like to get some feedback if it's
- the contrary for you.
-
user_xattr Enables Extended User Attributes. Additionally, you
need to have extended attribute support enabled in the
kernel configuration (CONFIG_EXT3_FS_XATTR). See the
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 232a575..4917cf2 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -160,7 +160,9 @@
lead to any number of problems.
data=journal All data are committed into the journal prior to being
- written into the main file system.
+ written into the main file system. Enabling
+ this mode will disable delayed allocation and
+ O_DIRECT support.
data=ordered (*) All data are forced directly out to the main file
system prior to its metadata being committed to the
@@ -201,30 +203,19 @@
table readahead algorithm will pre-read into
the buffer cache. The default value is 32 blocks.
-orlov (*) This enables the new Orlov block allocator. It is
- enabled by default.
-
-oldalloc This disables the Orlov block allocator and enables
- the old block allocator. Orlov should have better
- performance - we'd like to get some feedback if it's
- the contrary for you.
-
-user_xattr Enables Extended User Attributes. Additionally, you
- need to have extended attribute support enabled in the
- kernel configuration (CONFIG_EXT4_FS_XATTR). See the
- attr(5) manual page and http://acl.bestbits.at/ to
- learn more about extended attributes.
-
-nouser_xattr Disables Extended User Attributes.
-
-acl Enables POSIX Access Control Lists support.
- Additionally, you need to have ACL support enabled in
- the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL).
- See the acl(5) manual page and http://acl.bestbits.at/
- for more information.
+nouser_xattr Disables Extended User Attributes. If you have extended
+ attribute support enabled in the kernel configuration
+ (CONFIG_EXT4_FS_XATTR), extended attribute support
+ is enabled by default on mount. See the attr(5) manual
+ page and http://acl.bestbits.at/ for more information
+ about extended attributes.
noacl This option disables POSIX Access Control List
- support.
+ support. If ACL support is enabled in the kernel
+ configuration (CONFIG_EXT4_FS_POSIX_ACL), ACL is
+ enabled by default on mount. See the acl(5) manual
+ page and http://acl.bestbits.at/ for more information
+ about acl.
bsddf (*) Make 'df' act like BSD.
minixdf Make 'df' act like Minix.
@@ -419,8 +410,8 @@
In the event of a crash, the journal can be replayed, bringing both data and
metadata into a consistent state. This mode is the slowest except when data
needs to be read from and written to disk at the same time where it
-outperforms all others modes. Currently ext4 does not have delayed
-allocation support if this data journalling mode is selected.
+outperforms all others modes. Enabling this mode will disable delayed
+allocation and O_DIRECT support.
/proc entries
=============
diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt
index 7dcd1a4..a903ee5 100644
--- a/Documentation/hwspinlock.txt
+++ b/Documentation/hwspinlock.txt
@@ -39,23 +39,20 @@
in case an unused hwspinlock isn't available. Users of this
API will usually want to communicate the lock's id to the remote core
before it can be used to achieve synchronization.
- Can be called from an atomic context (this function will not sleep) but
- not from within interrupt context.
+ Should be called from a process context (might sleep).
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
- assign a specific hwspinlock id and return its address, or NULL
if that hwspinlock is already in use. Usually board code will
be calling this function in order to reserve specific hwspinlock
ids for predefined purposes.
- Can be called from an atomic context (this function will not sleep) but
- not from within interrupt context.
+ Should be called from a process context (might sleep).
int hwspin_lock_free(struct hwspinlock *hwlock);
- free a previously-assigned hwspinlock; returns 0 on success, or an
appropriate error code on failure (e.g. -EINVAL if the hwspinlock
is already free).
- Can be called from an atomic context (this function will not sleep) but
- not from within interrupt context.
+ Should be called from a process context (might sleep).
int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
- lock a previously-assigned hwspinlock with a timeout limit (specified in
@@ -230,45 +227,62 @@
4. API for implementors
- int hwspin_lock_register(struct hwspinlock *hwlock);
+ int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+ const struct hwspinlock_ops *ops, int base_id, int num_locks);
- to be called from the underlying platform-specific implementation, in
- order to register a new hwspinlock instance. Can be called from an atomic
- context (this function will not sleep) but not from within interrupt
- context. Returns 0 on success, or appropriate error code on failure.
+ order to register a new hwspinlock device (which is usually a bank of
+ numerous locks). Should be called from a process context (this function
+ might sleep).
+ Returns 0 on success, or appropriate error code on failure.
- struct hwspinlock *hwspin_lock_unregister(unsigned int id);
+ int hwspin_lock_unregister(struct hwspinlock_device *bank);
- to be called from the underlying vendor-specific implementation, in order
- to unregister an existing (and unused) hwspinlock instance.
- Can be called from an atomic context (will not sleep) but not from
- within interrupt context.
+ to unregister an hwspinlock device (which is usually a bank of numerous
+ locks).
+ Should be called from a process context (this function might sleep).
Returns the address of hwspinlock on success, or NULL on error (e.g.
if the hwspinlock is sill in use).
-5. struct hwspinlock
+5. Important structs
-This struct represents an hwspinlock instance. It is registered by the
-underlying hwspinlock implementation using the hwspin_lock_register() API.
+struct hwspinlock_device is a device which usually contains a bank
+of hardware locks. It is registered by the underlying hwspinlock
+implementation using the hwspin_lock_register() API.
/**
- * struct hwspinlock - vendor-specific hwspinlock implementation
- *
- * @dev: underlying device, will be used with runtime PM api
- * @ops: vendor-specific hwspinlock handlers
- * @id: a global, unique, system-wide, index of the lock.
- * @lock: initialized and used by hwspinlock core
- * @owner: underlying implementation module, used to maintain module ref count
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
*/
-struct hwspinlock {
+struct hwspinlock_device {
struct device *dev;
const struct hwspinlock_ops *ops;
- int id;
- spinlock_t lock;
- struct module *owner;
+ int base_id;
+ int num_locks;
+ struct hwspinlock lock[0];
};
-The underlying implementation is responsible to assign the dev, ops, id and
-owner members. The lock member, OTOH, is initialized and used by the hwspinlock
-core.
+struct hwspinlock_device contains an array of hwspinlock structs, each
+of which represents a single hardware lock:
+
+/**
+ * struct hwspinlock - this struct represents a single hwspinlock instance
+ * @bank: the hwspinlock_device structure which owns this lock
+ * @lock: initialized and used by hwspinlock core
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
+ */
+struct hwspinlock {
+ struct hwspinlock_device *bank;
+ spinlock_t lock;
+ void *priv;
+};
+
+When registering a bank of locks, the hwspinlock driver only needs to
+set the priv members of the locks. The rest of the members are set and
+initialized by the hwspinlock core itself.
6. Implementation callbacks
diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol
index 7c19d1a..49f5b68 100644
--- a/Documentation/i2c/smbus-protocol
+++ b/Documentation/i2c/smbus-protocol
@@ -88,6 +88,10 @@
S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
+Note the convenience function i2c_smbus_read_word_swapped is
+available for reads where the two data bytes are the other way
+around (not SMBus compliant, but very popular.)
+
SMBus Write Byte: i2c_smbus_write_byte_data()
==============================================
@@ -108,6 +112,10 @@
S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] P
+Note the convenience function i2c_smbus_write_word_swapped is
+available for writes where the two data bytes are the other way
+around (not SMBus compliant, but very popular.)
+
SMBus Process Call: i2c_smbus_process_call()
=============================================
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index db798af..5602eb7 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -16,15 +16,28 @@
1. Introduction
2. Extra knobs
- 3. Hardware version 1
- 3.1 Registers
- 3.2 Native relative mode 4 byte packet format
- 3.3 Native absolute mode 4 byte packet format
- 4. Hardware version 2
+ 3. Differentiating hardware versions
+ 4. Hardware version 1
4.1 Registers
- 4.2 Native absolute mode 6 byte packet format
- 4.2.1 One finger touch
- 4.2.2 Two finger touch
+ 4.2 Native relative mode 4 byte packet format
+ 4.3 Native absolute mode 4 byte packet format
+ 5. Hardware version 2
+ 5.1 Registers
+ 5.2 Native absolute mode 6 byte packet format
+ 5.2.1 Parity checking and packet re-synchronization
+ 5.2.2 One/Three finger touch
+ 5.2.3 Two finger touch
+ 6. Hardware version 3
+ 6.1 Registers
+ 6.2 Native absolute mode 6 byte packet format
+ 6.2.1 One/Three finger touch
+ 6.2.2 Two finger touch
+ 7. Hardware version 4
+ 7.1 Registers
+ 7.2 Native absolute mode 6 byte packet format
+ 7.2.1 Status packet
+ 7.2.2 Head packet
+ 7.2.3 Motion packet
@@ -375,7 +388,7 @@
In case an error is detected, all the packets are shifted by one (and packet[0] is discarded).
-5.2.1 One/Three finger touch
+5.2.2 One/Three finger touch
~~~~~~~~~~~~~~~~
byte 0:
@@ -384,19 +397,19 @@
n1 n0 w3 w2 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
bit 7 6 5 4 3 2 1 0
- p7 p6 p5 p4 . x10 x9 x8
+ p7 p6 p5 p4 x11 x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x3 x2 x1 x0
- x10..x0 = absolute x value (horizontal)
+ x11..x0 = absolute x value (horizontal)
byte 3:
@@ -420,7 +433,7 @@
byte 4:
bit 7 6 5 4 3 2 1 0
- p3 p1 p2 p0 . . y9 y8
+ p3 p1 p2 p0 y11 y10 y9 y8
p7..p0 = pressure (not EF113)
@@ -429,10 +442,10 @@
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y9..y0 = absolute y value (vertical)
+ y11..y0 = absolute y value (vertical)
-4.2.2 Two finger touch
+5.2.3 Two finger touch
~~~~~~~~~~~~~~~~
Note that the two pairs of coordinates are not exactly the coordinates of the
@@ -446,7 +459,7 @@
n1 n0 ay8 ax8 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
@@ -480,3 +493,253 @@
by7 by8 by5 by4 by3 by2 by1 by0
by8..by0 = upper-right finger absolute y value
+
+/////////////////////////////////////////////////////////////////////////////
+
+6. Hardware version 3
+ ==================
+
+6.1 Registers
+ ~~~~~~~~~
+* reg_10
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 0 0 0 0 0 A
+
+ A: 1 = enable absolute tracking
+
+6.2 Native absolute mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+1 and 3 finger touch shares the same 6-byte packet format, except that
+3 finger touch only reports the position of the center of all three fingers.
+
+Firmware would send 12 bytes of data for 2 finger touch.
+
+Note on debounce:
+In case the box has unstable power supply or other electricity issues, or
+when number of finger changes, F/W would send "debounce packet" to inform
+driver that the hardware is in debounce status.
+The debouce packet has the following signature:
+ byte 0: 0xc4
+ byte 1: 0xff
+ byte 2: 0xff
+ byte 3: 0x02
+ byte 4: 0xff
+ byte 5: 0xff
+When we encounter this kind of packet, we just ignore it.
+
+6.2.1 One/Three finger touch
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ n1 n0 w3 w2 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ n1..n0 = number of fingers on touchpad
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ p7 p6 p5 p4 x11 x10 x9 x8
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 w1 w0 0 0 1 0
+
+ w3..w0 = width of the finger touch
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p3 p1 p2 p0 y11 y10 y9 y8
+
+ p7..p0 = pressure
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y11..y0 = absolute y value (vertical)
+
+6.2.2 Two finger touch
+ ~~~~~~~~~~~~~~~~
+
+The packet format is exactly the same for two finger touch, except the hardware
+sends two 6 byte packets. The first packet contains data for the first finger,
+the second packet has data for the second finger. So for two finger touch a
+total of 12 bytes are sent.
+
+/////////////////////////////////////////////////////////////////////////////
+
+7. Hardware version 4
+ ==================
+
+7.1 Registers
+ ~~~~~~~~~
+* reg_07
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 0 0 0 0 0 A
+
+ A: 1 = enable absolute tracking
+
+7.2 Native absolute mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+v4 hardware is a true multitouch touchpad, capable of tracking up to 5 fingers.
+Unfortunately, due to PS/2's limited bandwidth, its packet format is rather
+complex.
+
+Whenever the numbers or identities of the fingers changes, the hardware sends a
+status packet to indicate how many and which fingers is on touchpad, followed by
+head packets or motion packets. A head packet contains data of finger id, finger
+position (absolute x, y values), width, and pressure. A motion packet contains
+two fingers' position delta.
+
+For example, when status packet tells there are 2 fingers on touchpad, then we
+can expect two following head packets. If the finger status doesn't change,
+the following packets would be motion packets, only sending delta of finger
+position, until we receive a status packet.
+
+One exception is one finger touch. when a status packet tells us there is only
+one finger, the hardware would just send head packets afterwards.
+
+7.2.1 Status packet
+ ~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . . 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . ft4 ft3 ft2 ft1 ft0
+
+ ft4 ft3 ft2 ft1 ft0 ftn = 1 when finger n is on touchpad
+
+byte 2: not used
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ . . . 1 0 0 0 0
+
+ constant bits
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p . . . . . . .
+
+ p = 1 for palm
+
+byte 5: not used
+
+7.2.2 Head packet
+ ~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ w3 w2 w1 w0 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ w3..w0 = finger width (spans how many trace lines)
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ p7 p6 p5 p4 x11 x10 x9 x8
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 1 0 0 0 1
+
+ id2..id0 = finger id
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p3 p1 p2 p0 y11 y10 y9 y8
+
+ p7..p0 = pressure
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y11..y0 = absolute y value (vertical)
+
+7.2.3 Motion packet
+ ~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 w 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ id2..id0 = finger id
+ w = 1 when delta overflows (> 127 or < -128), in this case
+ firmware sends us (delta x / 5) and (delta y / 5)
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x7..x0 = delta x (two's complement)
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y7..y0 = delta y (two's complement)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ id2 id1 id0 1 0 0 1 0
+
+ id2..id0 = finger id
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x7..x0 = delta x (two's complement)
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y7..y0 = delta y (two's complement)
+
+ byte 0 ~ 2 for one finger
+ byte 3 ~ 5 for another
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 71536e7..543101c 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -65,6 +65,20 @@
end. Upon receiving an MT event, one simply updates the appropriate
attribute of the current slot.
+Some devices identify and/or track more contacts than they can report to the
+driver. A driver for such a device should associate one type B slot with each
+contact that is reported by the hardware. Whenever the identity of the
+contact associated with a slot changes, the driver should invalidate that
+slot by changing its ABS_MT_TRACKING_ID. If the hardware signals that it is
+tracking more contacts than it is currently reporting, the driver should use
+a BTN_TOOL_*TAP event to inform userspace of the total number of contacts
+being tracked by the hardware at that moment. The driver should do this by
+explicitly sending the corresponding BTN_TOOL_*TAP event and setting
+use_count to false when calling input_mt_report_pointer_emulation().
+The driver should only advertise as many slots as the hardware can report.
+Userspace can detect that a driver can report more total contacts than slots
+by noting that the largest supported BTN_TOOL_*TAP event is larger than the
+total number of type B slots reported in the absinfo for the ABS_MT_SLOT axis.
Protocol Example A
------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a8ba119..a0c5c5f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -307,6 +307,19 @@
behaviour to be specified. Bit 0 enables warnings,
bit 1 enables fixups, and bit 2 sends a segfault.
+ align_va_addr= [X86-64]
+ Align virtual addresses by clearing slice [14:12] when
+ allocating a VMA at process creation time. This option
+ gives you up to 3% performance improvement on AMD F15h
+ machines (where it is enabled by default) for a
+ CPU-intensive style benchmark, and it can vary highly in
+ a microbenchmark depending on workload and compiler.
+
+ 1: only for 32-bit processes
+ 2: only for 64-bit processes
+ on: enable for both 32- and 64-bit processes
+ off: disable for both 32- and 64-bit processes
+
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
@@ -728,10 +741,10 @@
See Documentation/block/cfq-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
- elfcorehdr= [IA-64,PPC,SH,X86]
+ elfcorehdr=[size[KMG]@]offset[KMG] [IA64,PPC,SH,X86,S390]
Specifies physical address of start of kernel core
- image elf header. Generally kexec loader will
- pass this option to capture kernel.
+ image elf header and optionally the size. Generally
+ kexec loader will pass this option to capture kernel.
See Documentation/kdump/kdump.txt for details.
enable_mtrr_cleanup [X86]
@@ -960,6 +973,9 @@
ignore_loglevel [KNL]
Ignore loglevel setting - this will print /all/
kernel messages to the console. Useful for debugging.
+ We also add it as printk module parameter, so users
+ could change it dynamically, usually by
+ /sys/module/printk/parameters/ignore_loglevel.
ihash_entries= [KNL]
Set number of hash buckets for inode cache.
@@ -1188,6 +1204,10 @@
[KVM,Intel] Disable FlexPriority feature (TPR shadow).
Default is 1 (enabled)
+ kvm-intel.nested=
+ [KVM,Intel] Enable VMX nesting (nVMX).
+ Default is 0 (disabled)
+
kvm-intel.unrestricted_guest=
[KVM,Intel] Disable unrestricted guest feature
(virtualized real and unpaged mode) on capable
@@ -1649,6 +1669,11 @@
debugging driver suspend/resume hooks). This may
not work reliably with all consoles, but is known
to work with serial and VGA consoles.
+ To facilitate more flexible debugging, we also add
+ console_suspend, a printk module parameter to control
+ it. Users could use console_suspend (usually
+ /sys/module/printk/parameters/console_suspend) to
+ turn on/off it dynamically.
noaliencache [MM, NUMA, SLAB] Disables the allocation of alien
caches in the slab allocator. Saves per-node memory,
@@ -1784,6 +1809,11 @@
noresidual [PPC] Don't use residual data on PReP machines.
+ nordrand [X86] Disable the direct use of the RDRAND
+ instruction even if it is supported by the
+ processor. RDRAND is still available to user
+ space applications.
+
noresume [SWSUSP] Disables resume and restores original swap
space.
diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/LICENSE.qlcnic
index 29ad4b1..e7fb2c6 100644
--- a/Documentation/networking/LICENSE.qlcnic
+++ b/Documentation/networking/LICENSE.qlcnic
@@ -1,61 +1,22 @@
-Copyright (c) 2009-2010 QLogic Corporation
+Copyright (c) 2009-2011 QLogic Corporation
QLogic Linux qlcnic NIC Driver
-This program includes a device driver for Linux 2.6 that may be
-distributed with QLogic hardware specific firmware binary file.
You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).
-You may redistribute the hardware specific firmware binary file
-under the following terms:
-
- 1. Redistribution of source code (only if applicable),
- must retain the above copyright notice, this list of
- conditions and the following disclaimer.
-
- 2. Redistribution in binary form must reproduce the above
- copyright notice, this list of conditions and the
- following disclaimer in the documentation and/or other
- materials provided with the distribution.
-
- 3. The name of QLogic Corporation may not be used to
- endorse or promote products derived from this software
- without specific prior written permission
-
-REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
-THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
-EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
-CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
-OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
-TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
-ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
-COMBINATION WITH THIS PROGRAM.
-
EXHIBIT A
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
- Preamble
+ Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
@@ -105,7 +66,7 @@
The precise terms and conditions for copying, distribution and
modification follow.
- GNU GENERAL PUBLIC LICENSE
+ GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
@@ -304,7 +265,7 @@
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
- NO WARRANTY
+ NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index b42419b..ce63af0 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -16,7 +16,7 @@
each regulator.
struct regulator_consumer_supply {
- struct device *dev; /* consumer */
+ const char *dev_name; /* consumer dev_name() */
const char *supply; /* consumer supply - e.g. "vcc" */
};
@@ -24,13 +24,13 @@
static struct regulator_consumer_supply regulator1_consumers[] = {
{
- .dev = &platform_consumerB_device.dev,
- .supply = "Vcc",
+ .dev_name = "dev_name(consumer B)",
+ .supply = "Vcc",
},};
static struct regulator_consumer_supply regulator2_consumers[] = {
{
- .dev = &platform_consumerA_device.dev,
+ .dev = "dev_name(consumer A"),
.supply = "Vcc",
},};
@@ -43,6 +43,7 @@
static struct regulator_init_data regulator1_data = {
.constraints = {
+ .name = "Regulator-1",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
@@ -51,13 +52,19 @@
.consumer_supplies = regulator1_consumers,
};
+The name field should be set to something that is usefully descriptive
+for the board for configuration of supplies for other regulators and
+for use in logging and other diagnostic output. Normally the name
+used for the supply rail in the schematic is a good choice. If no
+name is provided then the subsystem will choose one.
+
Regulator-1 supplies power to Regulator-2. This relationship must be registered
with the core so that Regulator-1 is also enabled when Consumer A enables its
supply (Regulator-2). The supply regulator is set by the supply_regulator
-field below:-
+field below and co:-
static struct regulator_init_data regulator2_data = {
- .supply_regulator = "regulator_name",
+ .supply_regulator = "Regulator-1",
.constraints = {
.min_uV = 1800000,
.max_uV = 2000000,
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt
index be70ee1..c75694b 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.txt
@@ -144,7 +144,7 @@
After the host has completed enumeration of the entire network it releases
devices by clearing device ID locks (calls rio_clear_locks()). For each endpoint
-in the system, it sets the Master Enable bit in the Port General Control CSR
+in the system, it sets the Discovered bit in the Port General Control CSR
to indicate that enumeration is completed and agents are allowed to execute
passive discovery of the network.
diff --git a/Documentation/rapidio/tsi721.txt b/Documentation/rapidio/tsi721.txt
new file mode 100644
index 0000000..335f3c6
--- /dev/null
+++ b/Documentation/rapidio/tsi721.txt
@@ -0,0 +1,49 @@
+RapidIO subsystem mport driver for IDT Tsi721 PCI Express-to-SRIO bridge.
+=========================================================================
+
+I. Overview
+
+This driver implements all currently defined RapidIO mport callback functions.
+It supports maintenance read and write operations, inbound and outbound RapidIO
+doorbells, inbound maintenance port-writes and RapidIO messaging.
+
+To generate SRIO maintenance transactions this driver uses one of Tsi721 DMA
+channels. This mechanism provides access to larger range of hop counts and
+destination IDs without need for changes in outbound window translation.
+
+RapidIO messaging support uses dedicated messaging channels for each mailbox.
+For inbound messages this driver uses destination ID matching to forward messages
+into the corresponding message queue. Messaging callbacks are implemented to be
+fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
+
+II. Known problems
+
+ None.
+
+III. To do
+
+ Add DMA data transfers (non-messaging).
+ Add inbound region (SRIO-to-PCIe) mapping.
+
+IV. Version History
+
+ 1.0.0 - Initial driver release.
+
+V. License
+-----------------------------------------------
+
+ Copyright(c) 2011 Integrated Device Technology, Inc. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX
index c2e18e1..b48ded5 100644
--- a/Documentation/scsi/00-INDEX
+++ b/Documentation/scsi/00-INDEX
@@ -28,6 +28,8 @@
- Licence of the Flashpoint driver
LICENSE.qla2xxx
- License for QLogic Linux Fibre Channel HBA Driver firmware.
+LICENSE.qla4xxx
+ - License for QLogic Linux iSCSI HBA Driver.
Mylex.txt
- info on driver for Mylex adapters
NinjaSCSI.txt
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 1b6e27d..64adb98 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,18 @@
+Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Adam Radford
+Current Version : 00.00.06.12-rc1
+Old Version : 00.00.05.40-rc1
+ 1. Continue booting immediately if FW in FAULT at driver load time.
+ 2. Increase default cmds per lun to 256.
+ 3. Fix mismatch in megasas_reset_fusion() mutex lock-unlock.
+ 4. Remove some un-necessary code.
+ 5. Clear state change interrupts for Fusion/Invader.
+ 6. Clear FUSION_IN_RESET before enabling interrupts.
+ 7. Add support for MegaRAID 9360/9380 12GB/s controllers.
+ 8. Add multiple MSI-X vector/multiple reply queue support.
+ 9. Add driver workaround for PERC5/1068 kdump kernel panic.
+-------------------------------------------------------------------------------
Release Date : Tue. Jul 26, 2011 17:00:00 PST 2010 -
(emaild-id:megaraidlinux@lsi.com)
Adam Radford
diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx
new file mode 100644
index 0000000..494980e
--- /dev/null
+++ b/Documentation/scsi/LICENSE.qla4xxx
@@ -0,0 +1,310 @@
+Copyright (c) 2003-2011 QLogic Corporation
+QLogic Linux iSCSI HBA Driver
+
+This program includes a device driver for Linux 3.x.
+You may modify and redistribute the device driver code under the
+GNU General Public License (a copy of which is attached hereto as
+Exhibit A) published by the Free Software Foundation (version 2).
+
+REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
+THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
+CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
+OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
+TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
+ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
+COMBINATION WITH THIS PROGRAM.
+
+
+EXHIBIT A
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
diff --git a/Documentation/scsi/bnx2fc.txt b/Documentation/scsi/bnx2fc.txt
new file mode 100644
index 0000000..8082355
--- /dev/null
+++ b/Documentation/scsi/bnx2fc.txt
@@ -0,0 +1,75 @@
+Operating FCoE using bnx2fc
+===========================
+Broadcom FCoE offload through bnx2fc is full stateful hardware offload that
+cooperates with all interfaces provided by the Linux ecosystem for FC/FCoE and
+SCSI controllers. As such, FCoE functionality, once enabled is largely
+transparent. Devices discovered on the SAN will be registered and unregistered
+automatically with the upper storage layers.
+
+Despite the fact that the Broadcom's FCoE offload is fully offloaded, it does
+depend on the state of the network interfaces to operate. As such, the network
+interface (e.g. eth0) associated with the FCoE offload initiator must be 'up'.
+It is recommended that the network interfaces be configured to be brought up
+automatically at boot time.
+
+Furthermore, the Broadcom FCoE offload solution creates VLAN interfaces to
+support the VLANs that have been discovered for FCoE operation (e.g.
+eth0.1001-fcoe). Do not delete or disable these interfaces or FCoE operation
+will be disrupted.
+
+Driver Usage Model:
+===================
+
+1. Ensure that fcoe-utils package is installed.
+
+2. Configure the interfaces on which bnx2fc driver has to operate on.
+Here are the steps to configure:
+ a. cd /etc/fcoe
+ b. copy cfg-ethx to cfg-eth5 if FCoE has to be enabled on eth5.
+ c. Repeat this for all the interfaces where FCoE has to be enabled.
+ d. Edit all the cfg-eth files to set "no" for DCB_REQUIRED** field, and
+ "yes" for AUTO_VLAN.
+ e. Other configuration parameters should be left as default
+
+3. Ensure that "bnx2fc" is in SUPPORTED_DRIVERS list in /etc/fcoe/config.
+
+4. Start fcoe service. (service fcoe start). If Broadcom devices are present in
+the system, bnx2fc driver would automatically claim the interfaces, starts vlan
+discovery and log into the targets.
+
+5. "Symbolic Name" in 'fcoeadm -i' output would display if bnx2fc has claimed
+the interface.
+Eg:
+[root@bh2 ~]# fcoeadm -i
+ Description: NetXtreme II BCM57712 10 Gigabit Ethernet
+ Revision: 01
+ Manufacturer: Broadcom Corporation
+ Serial Number: 0010186FD558
+ Driver: bnx2x 1.70.00-0
+ Number of Ports: 2
+
+ Symbolic Name: bnx2fc v1.0.5 over eth5.4
+ OS Device Name: host11
+ Node Name: 0x10000010186FD559
+ Port Name: 0x20000010186FD559
+ FabricName: 0x2001000DECB3B681
+ Speed: 10 Gbit
+ Supported Speed: 10 Gbit
+ MaxFrameSize: 2048
+ FC-ID (Port ID): 0x0F0377
+ State: Online
+
+6. Verify the vlan discovery is performed by running ifconfig and notice
+<INTERFACE>.<VLAN>-fcoe interfaces are automatically created.
+
+Refer to fcoeadm manpage for more information on fcoeadm operations to
+create/destroy interfaces or to display lun/target information.
+
+NOTE:
+====
+** Broadcom FCoE capable devices implement a DCBX/LLDP client on-chip. Only one
+LLDP client is allowed per interface. For proper operation all host software
+based DCBX/LLDP clients (e.g. lldpad) must be disabled. To disable lldpad on a
+given interface, run the following command:
+
+lldptool set-lldp -i <interface_name> adminStatus=disabled
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 8975701..936699e 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -886,6 +886,12 @@
disable)
power_save_controller - Reset HD-audio controller in power-saving mode
(default = on)
+ align_buffer_size - Force rounding of buffer/period sizes to multiples
+ of 128 bytes. This is more efficient in terms of memory
+ access but isn't required by the HDA spec and prevents
+ users from specifying exact period/buffer sizes.
+ (default = on)
+ snoop - Enable/disable snooping (default = on)
This module supports multiple cards and autoprobe.
diff --git a/Documentation/sound/alsa/HD-Audio-Controls.txt b/Documentation/sound/alsa/HD-Audio-Controls.txt
index 1482035..e9621e3 100644
--- a/Documentation/sound/alsa/HD-Audio-Controls.txt
+++ b/Documentation/sound/alsa/HD-Audio-Controls.txt
@@ -98,3 +98,19 @@
* Auto-Mute Mode
See Reatek codecs.
+
+
+Analog codecs
+--------------
+
+* Channel Mode
+ This is an enum control to change the surround-channel setup,
+ appears only when the surround channels are available.
+ It gives the number of channels to be used, "2ch", "4ch" and "6ch".
+ According to the configuration, this also controls the
+ jack-retasking of multi-I/O jacks.
+
+* Independent HP
+ When this enum control is enabled, the headphone output is routed
+ from an individual stream (the third PCM such as hw:0,2) instead of
+ the primary stream.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index d70c93b..4f34432 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -29,9 +29,6 @@
ALC260
======
- hp HP machines
- hp-3013 HP machines (3013-variant)
- hp-dc7600 HP DC7600
fujitsu Fujitsu S7020
acer Acer TravelMate
will Will laptops (PB V7900)
@@ -46,15 +43,10 @@
ALC262
======
fujitsu Fujitsu Laptop
- hp-bpc HP xw4400/6400/8400/9400 laptops
- hp-bpc-d7000 HP BPC D7000
- hp-tc-t5735 HP Thin Client T5735
- hp-rp5700 HP RP5700
benq Benq ED8
benq-t31 Benq T31
hippo Hippo (ATI) with jack detection, Sony UX-90s
hippo_1 Hippo (Benq) with jack detection
- sony-assamd Sony ASSAMD
toshiba-s06 Toshiba S06
toshiba-rx1 Toshiba RX1
tyan Tyan Thunder n6650W (S2915-E)
@@ -66,43 +58,15 @@
ALC267/268
==========
- quanta-il1 Quanta IL1 mini-notebook
- 3stack 3-stack model
- toshiba Toshiba A205
- acer Acer laptops
- acer-dmic Acer laptops with digital-mic
- acer-aspire Acer Aspire One
- dell Dell OEM laptops (Vostro 1200)
- zepto Zepto laptops
- test for testing/debugging purpose, almost all controls can
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
+ N/A
ALC269
======
- basic Basic preset
- quanta Quanta FL1
laptop-amic Laptops with analog-mic input
laptop-dmic Laptops with digital-mic input
- fujitsu FSC Amilo
- lifebook Fujitsu Lifebook S6420
- auto auto-config reading BIOS (default)
ALC662/663/272
==============
- 3stack-dig 3-stack (2-channel) with SPDIF
- 3stack-6ch 3-stack (6-channel)
- 3stack-6ch-dig 3-stack (6-channel) with SPDIF
- 5stack-dig 5-stack with SPDIF
- lenovo-101e Lenovo laptop
- eeepc-p701 ASUS Eeepc P701
- eeepc-ep20 ASUS Eeepc EP20
- ecs ECS/Foxconn mobo
- m51va ASUS M51VA
- g71v ASUS G71V
- h13 ASUS H13
- g50v ASUS G50V
asus-mode1 ASUS
asus-mode2 ASUS
asus-mode3 ASUS
@@ -111,15 +75,10 @@
asus-mode6 ASUS
asus-mode7 ASUS
asus-mode8 ASUS
- dell Dell with ALC272
- dell-zm1 Dell ZM1 with ALC272
- samsung-nc10 Samsung NC10 mini notebook
- auto auto-config reading BIOS (default)
ALC680
======
- base Base model (ASUS NX90)
- auto auto-config reading BIOS (default)
+ N/A
ALC882/883/885/888/889
======================
@@ -175,28 +134,11 @@
ALC861/660
==========
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack with SPDIF I/O
- 3stack-660 3-jack (for ALC660)
- uniwill-m31 Uniwill M31 laptop
- toshiba Toshiba laptop support
- asus Asus laptop support
- asus-laptop ASUS F2/F3 laptops
- auto auto-config reading BIOS (default)
+ N/A
ALC861VD/660VD
==============
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF OUT
- 6stack-dig 6-jack with SPDIF OUT
- 3stack-660 3-jack (for ALC660VD)
- 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
- lenovo Lenovo 3000 C200
- dallas Dallas laptops
- hp HP TX1000
- asus-v1s ASUS V1Sn
- auto auto-config reading BIOS (default)
+ N/A
CMI9880
=======
@@ -289,7 +231,6 @@
hp-dv6736 HP dv6736
hp-f700 HP Compaq Presario F700
ideapad Lenovo IdeaPad laptop
- lenovo-x200 Lenovo X200 laptop
toshiba Toshiba Satellite M300
Conexant 5066
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index c82beb0..03e2771 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -447,7 +447,10 @@
three numbers indicating the codec vendor-id (0x12345678 in the
example), the codec subsystem-id (0xabcd1234) and the address (2) of
the codec. The rest patch entries are applied to this specified codec
-until another codec entry is given.
+until another codec entry is given. Passing 0 or a negative number to
+the first or the second value will make the check of the corresponding
+field be skipped. It'll be useful for really broken devices that don't
+initialize SSID properly.
The `[model]` line allows to change the model name of the each codec.
In the example above, it will be changed to model=auto.
@@ -491,7 +494,7 @@
The hd-audio driver reads the file via request_firmware(). Thus,
a patch file has to be located on the appropriate firmware path,
typically, /lib/firmware. For example, when you pass the option
-`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+`patch=hda-init.fw`, the file /lib/firmware/hda-init.fw must be
present.
The patch module option is specific to each card instance, and you
@@ -524,6 +527,54 @@
check the current value. If it's non-zero, the feature is turned on.
+Tracepoints
+~~~~~~~~~~~
+The hd-audio driver gives a few basic tracepoints.
+`hda:hda_send_cmd` traces each CORB write while `hda:hda_get_response`
+traces the response from RIRB (only when read from the codec driver).
+`hda:hda_bus_reset` traces the bus-reset due to fatal error, etc,
+`hda:hda_unsol_event` traces the unsolicited events, and
+`hda:hda_power_down` and `hda:hda_power_up` trace the power down/up
+via power-saving behavior.
+
+Enabling all tracepoints can be done like
+------------------------------------------------------------------------
+ # echo 1 > /sys/kernel/debug/tracing/events/hda/enable
+------------------------------------------------------------------------
+then after some commands, you can traces from
+/sys/kernel/debug/tracing/trace file. For example, when you want to
+trace what codec command is sent, enable the tracepoint like:
+------------------------------------------------------------------------
+ # cat /sys/kernel/debug/tracing/trace
+ # tracer: nop
+ #
+ # TASK-PID CPU# TIMESTAMP FUNCTION
+ # | | | | |
+ <...>-7807 [002] 105147.774889: hda_send_cmd: [0:0] val=e3a019
+ <...>-7807 [002] 105147.774893: hda_send_cmd: [0:0] val=e39019
+ <...>-7807 [002] 105147.999542: hda_send_cmd: [0:0] val=e3a01a
+ <...>-7807 [002] 105147.999543: hda_send_cmd: [0:0] val=e3901a
+ <...>-26764 [001] 349222.837143: hda_send_cmd: [0:0] val=e3a019
+ <...>-26764 [001] 349222.837148: hda_send_cmd: [0:0] val=e39019
+ <...>-26764 [001] 349223.058539: hda_send_cmd: [0:0] val=e3a01a
+ <...>-26764 [001] 349223.058541: hda_send_cmd: [0:0] val=e3901a
+------------------------------------------------------------------------
+Here `[0:0]` indicates the card number and the codec address, and
+`val` shows the value sent to the codec, respectively. The value is
+a packed value, and you can decode it via hda-decode-verb program
+included in hda-emu package below. For example, the value e3a019 is
+to set the left output-amp value to 25.
+------------------------------------------------------------------------
+ % hda-decode-verb 0xe3a019
+ raw value = 0x00e3a019
+ cid = 0, nid = 0x0e, verb = 0x3a0, parm = 0x19
+ raw value: verb = 0x3a0, parm = 0x19
+ verbname = set_amp_gain_mute
+ amp raw val = 0xa019
+ output, left, idx=0, mute=0, val=25
+------------------------------------------------------------------------
+
+
Development Tree
~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree:
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 704e474a..1f24636 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -24,6 +24,7 @@
- bootloader_type [ X86 only ]
- bootloader_version [ X86 only ]
- callhome [ S390 only ]
+- cap_last_cap
- core_pattern
- core_pipe_limit
- core_uses_pid
@@ -155,6 +156,13 @@
==============================================================
+cap_last_cap
+
+Highest valid capability of the running kernel. Exports
+CAP_LAST_CAP from the kernel.
+
+==============================================================
+
core_pattern:
core_pattern is used to specify a core dumpfile pattern name.
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index 12cecc8..4a37c47 100644
--- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -379,10 +379,10 @@
# To closer match vmstat scanning statistics, only count isolate_both
# and isolate_inactive as scanning. isolate_active is rotation
- # isolate_inactive == 0
- # isolate_active == 1
- # isolate_both == 2
- if ($isolate_mode != 1) {
+ # isolate_inactive == 1
+ # isolate_active == 2
+ # isolate_both == 3
+ if ($isolate_mode != 2) {
$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
}
$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
diff --git a/drivers/staging/tm6000/CARDLIST b/Documentation/video4linux/CARDLIST.tm6000
similarity index 100%
rename from drivers/staging/tm6000/CARDLIST
rename to Documentation/video4linux/CARDLIST.tm6000
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 5bfa9a7..b15e29f 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -8,6 +8,7 @@
----
spca501 0000:0000 MystFromOri Unknown Camera
spca508 0130:0130 Clone Digital Webcam 11043
+zc3xx 03f0:1b07 HP Premium Starter Cam
m5602 0402:5602 ALi Video Camera Controller
spca501 040a:0002 Kodak DVC-325
spca500 040a:0300 Kodak EZ200
@@ -190,6 +191,7 @@
ov519 05a9:0530 OmniVision
ov519 05a9:2800 OmniVision SuperCAM
ov519 05a9:4519 Webcam Classic
+ov534_9 05a9:8065 OmniVision test kit ov538+ov9712
ov519 05a9:8519 OmniVision
ov519 05a9:a511 D-Link USB Digital Video Camera
ov519 05a9:a518 D-Link DSB-C310 Webcam
@@ -199,6 +201,8 @@
gl860 05e3:f191 Genesys Logic PC Camera
spca561 060b:a001 Maxell Compact Pc PM3
zc3xx 0698:2003 CTX M730V built in
+topro 06a2:0003 TP6800 PC Camera, CmoX CX0342 webcam
+topro 06a2:6810 Creative Qmax
nw80x 06a5:0000 Typhoon Webcam 100 USB
nw80x 06a5:d001 Divio based webcams
nw80x 06a5:d800 Divio Chicony TwinkleCam, Trust SpaceCam
diff --git a/Documentation/video4linux/omap3isp.txt b/Documentation/video4linux/omap3isp.txt
index 69be2c7..5dd1439 100644
--- a/Documentation/video4linux/omap3isp.txt
+++ b/Documentation/video4linux/omap3isp.txt
@@ -70,10 +70,11 @@
The OMAP 3 ISP driver does support the V4L2 event interface on CCDC and
statistics (AEWB, AF and histogram) subdevs.
-The CCDC subdev produces V4L2_EVENT_OMAP3ISP_HS_VS type event on HS_VS
-interrupt which is used to signal frame start. The event is triggered exactly
-when the reception of the first line of the frame starts in the CCDC module.
-The event can be subscribed on the CCDC subdev.
+The CCDC subdev produces V4L2_EVENT_FRAME_SYNC type event on HS_VS
+interrupt which is used to signal frame start. Earlier version of this
+driver used V4L2_EVENT_OMAP3ISP_HS_VS for this purpose. The event is
+triggered exactly when the reception of the first line of the frame starts
+in the CCDC module. The event can be subscribed on the CCDC subdev.
(When using parallel interface one must pay account to correct configuration
of the VS signal polarity. This is automatically correct when using the serial
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
index 9346fc8..26aa057 100644
--- a/Documentation/video4linux/v4l2-controls.txt
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -285,11 +285,11 @@
Note that you use the 'new value' union as well in g_volatile_ctrl. In general
controls that need to implement g_volatile_ctrl are read-only controls.
-To mark a control as volatile you have to set the is_volatile flag:
+To mark a control as volatile you have to set V4L2_CTRL_FLAG_VOLATILE:
ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
if (ctrl)
- ctrl->is_volatile = 1;
+ ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
@@ -367,8 +367,7 @@
The last argument is the priv pointer which can be set to driver-specific
private data.
-The v4l2_ctrl_config struct also has fields to set the is_private and is_volatile
-flags.
+The v4l2_ctrl_config struct also has a field to set the is_private flag.
If the name field is not set, then the framework will assume this is a standard
control and will fill in the name, type and flags fields accordingly.
@@ -496,18 +495,20 @@
A common type of control cluster is one that handles 'auto-foo/foo'-type
controls. Typical examples are autogain/gain, autoexposure/exposure,
-autowhitebalance/red balance/blue balance. In all cases you have one controls
+autowhitebalance/red balance/blue balance. In all cases you have one control
that determines whether another control is handled automatically by the hardware,
or whether it is under manual control from the user.
If the cluster is in automatic mode, then the manual controls should be
-marked inactive. When the volatile controls are read the g_volatile_ctrl
-operation should return the value that the hardware's automatic mode set up
-automatically.
+marked inactive and volatile. When the volatile controls are read the
+g_volatile_ctrl operation should return the value that the hardware's automatic
+mode set up automatically.
If the cluster is put in manual mode, then the manual controls should become
-active again and the is_volatile flag should be ignored (so g_volatile_ctrl is
-no longer called while in manual mode).
+active again and the volatile flag is cleared (so g_volatile_ctrl is no longer
+called while in manual mode). In addition just before switching to manual mode
+the current values as determined by the auto mode are copied as the new manual
+values.
Finally the V4L2_CTRL_FLAG_UPDATE should be set for the auto control since
changing that control affects the control flags of the manual controls.
@@ -520,7 +521,11 @@
The first two arguments are identical to v4l2_ctrl_cluster. The third argument
tells the framework which value switches the cluster into manual mode. The
-last argument will optionally set the is_volatile flag for the non-auto controls.
+last argument will optionally set V4L2_CTRL_FLAG_VOLATILE for the non-auto controls.
+If it is false, then the manual controls are never volatile. You would typically
+use that if the hardware does not give you the option to read back to values as
+determined by the auto mode (e.g. if autogain is on, the hardware doesn't allow
+you to obtain the current gain value).
The first control of the cluster is assumed to be the 'auto' control.
@@ -681,16 +686,6 @@
count if nothing was done yet. If it is less than count then only the controls
up to error_idx-1 were successfully applied.
-3) When attempting to read a button control the framework will return -EACCES
-instead of -EINVAL as stated in the spec. It seems to make more sense since
-button controls are write-only controls.
-
-4) Attempting to write to a read-only control will return -EACCES instead of
--EINVAL as the spec says.
-
-5) The spec does not mention what should happen when you try to set/get a
-control class controls. The framework will return -EACCES.
-
Proposals for Extensions
========================
@@ -703,9 +698,3 @@
2) It is possible to mark in the controls array which controls have been
successfully written and which failed by for example adding a bit to the
control ID. Not sure if it is worth the effort, though.
-
-3) Trying to set volatile inactive controls should result in -EACCESS.
-
-4) Add a new flag to mark volatile controls. Any application that wants
-to store the state of the controls can then skip volatile inactive controls.
-Currently it is not possible to detect such controls.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index b0e4b9c..7945b0b 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -175,10 +175,30 @@
Returns: vcpu fd on success, -1 on error
This API adds a vcpu to a virtual machine. The vcpu id is a small integer
-in the range [0, max_vcpus). You can use KVM_CAP_NR_VCPUS of the
-KVM_CHECK_EXTENSION ioctl() to determine the value for max_vcpus at run-time.
+in the range [0, max_vcpus).
+
+The recommended max_vcpus value can be retrieved using the KVM_CAP_NR_VCPUS of
+the KVM_CHECK_EXTENSION ioctl() at run-time.
+The maximum possible value for max_vcpus can be retrieved using the
+KVM_CAP_MAX_VCPUS of the KVM_CHECK_EXTENSION ioctl() at run-time.
+
If the KVM_CAP_NR_VCPUS does not exist, you should assume that max_vcpus is 4
cpus max.
+If the KVM_CAP_MAX_VCPUS does not exist, you should assume that max_vcpus is
+same as the value returned from KVM_CAP_NR_VCPUS.
+
+On powerpc using book3s_hv mode, the vcpus are mapped onto virtual
+threads in one or more virtual CPU cores. (This is because the
+hardware requires all the hardware threads in a CPU core to be in the
+same partition.) The KVM_CAP_PPC_SMT capability indicates the number
+of vcpus per virtual core (vcore). The vcore id is obtained by
+dividing the vcpu id by the number of vcpus per vcore. The vcpus in a
+given vcore will always be in the same physical core as each other
+(though that might be a different physical core from time to time).
+Userspace can control the threading (SMT) mode of the guest by its
+allocation of vcpu ids. For example, if userspace wants
+single-threaded guest vcpus, it should make all vcpu ids be a multiple
+of the number of vcpus per vcore.
On powerpc using book3s_hv mode, the vcpus are mapped onto virtual
threads in one or more virtual CPU cores. (This is because the
@@ -1633,3 +1653,50 @@
char padding[256];
};
};
+
+6. Capabilities that can be enabled
+
+There are certain capabilities that change the behavior of the virtual CPU when
+enabled. To enable them, please see section 4.37. Below you can find a list of
+capabilities and what their effect on the vCPU is when enabling them.
+
+The following information is provided along with the description:
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Parameters: what parameters are accepted by the capability.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+6.1 KVM_CAP_PPC_OSI
+
+Architectures: ppc
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables interception of OSI hypercalls that otherwise would
+be treated as normal system calls to be injected into the guest. OSI hypercalls
+were invented by Mac-on-Linux to have a standardized communication mechanism
+between the guest and the host.
+
+When this capability is enabled, KVM_EXIT_OSI can occur.
+
+6.2 KVM_CAP_PPC_PAPR
+
+Architectures: ppc
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables interception of PAPR hypercalls. PAPR hypercalls are
+done using the hypercall instruction "sc 1".
+
+It also sets the guest privilege level to "supervisor" mode. Usually the guest
+runs in "hypervisor" privilege mode with a few missing features.
+
+In addition to the above, it changes the semantics of SDR1. In this mode, the
+HTAB address part of SDR1 contains an HVA instead of a GPA, as PAPR keeps the
+HTAB invisible to the guest.
+
+When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur.
diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
index 5d0fc8b..77dfecf 100644
--- a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
@@ -134,13 +134,13 @@
______________________________________________________________________
- 11.. IInnttrroodduuccttiioonn
+ 1. Introduction
Welcome to User Mode Linux. It's going to be fun.
- 11..11.. HHooww iiss UUsseerr MMooddee LLiinnuuxx DDiiffffeerreenntt??
+ 1.1. How is User Mode Linux Different?
Normally, the Linux Kernel talks straight to your hardware (video
card, keyboard, hard drives, etc), and any programs which run ask the
@@ -181,7 +181,7 @@
- 11..22.. WWhhyy WWoouulldd II WWaanntt UUsseerr MMooddee LLiinnuuxx??
+ 1.2. Why Would I Want User Mode Linux?
1. If User Mode Linux crashes, your host kernel is still fine.
@@ -206,12 +206,12 @@
- 22.. CCoommppiilliinngg tthhee kkeerrnneell aanndd mmoodduulleess
+ 2. Compiling the kernel and modules
- 22..11.. CCoommppiilliinngg tthhee kkeerrnneell
+ 2.1. Compiling the kernel
Compiling the user mode kernel is just like compiling any other
@@ -322,7 +322,7 @@
bug fixes and enhancements that have gone into subsequent releases.
- 22..22.. CCoommppiilliinngg aanndd iinnssttaalllliinngg kkeerrnneell mmoodduulleess
+ 2.2. Compiling and installing kernel modules
UML modules are built in the same way as the native kernel (with the
exception of the 'ARCH=um' that you always need for UML):
@@ -386,19 +386,19 @@
- 22..33.. CCoommppiilliinngg aanndd iinnssttaalllliinngg uummll__uuttiilliittiieess
+ 2.3. Compiling and installing uml_utilities
Many features of the UML kernel require a user-space helper program,
so a uml_utilities package is distributed separately from the kernel
patch which provides these helpers. Included within this is:
- +o port-helper - Used by consoles which connect to xterms or ports
+ o port-helper - Used by consoles which connect to xterms or ports
- +o tunctl - Configuration tool to create and delete tap devices
+ o tunctl - Configuration tool to create and delete tap devices
- +o uml_net - Setuid binary for automatic tap device configuration
+ o uml_net - Setuid binary for automatic tap device configuration
- +o uml_switch - User-space virtual switch required for daemon
+ o uml_switch - User-space virtual switch required for daemon
transport
The uml_utilities tree is compiled with:
@@ -423,11 +423,11 @@
- 33.. RRuunnnniinngg UUMMLL aanndd llooggggiinngg iinn
+ 3. Running UML and logging in
- 33..11.. RRuunnnniinngg UUMMLL
+ 3.1. Running UML
It runs on 2.2.15 or later, and all 2.4 kernels.
@@ -454,7 +454,7 @@
- 33..22.. LLooggggiinngg iinn
+ 3.2. Logging in
@@ -468,7 +468,7 @@
There are a couple of other ways to log in:
- +o On a virtual console
+ o On a virtual console
@@ -480,7 +480,7 @@
- +o Over the serial line
+ o Over the serial line
In the boot output, find a line that looks like:
@@ -503,7 +503,7 @@
- +o Over the net
+ o Over the net
If the network is running, then you can telnet to the virtual
@@ -514,13 +514,13 @@
down and the process will exit.
- 33..33.. EExxaammpplleess
+ 3.3. Examples
Here are some examples of UML in action:
- +o A login session <http://user-mode-linux.sourceforge.net/login.html>
+ o A login session <http://user-mode-linux.sourceforge.net/login.html>
- +o A virtual network <http://user-mode-linux.sourceforge.net/net.html>
+ o A virtual network <http://user-mode-linux.sourceforge.net/net.html>
@@ -528,12 +528,12 @@
- 44.. UUMMLL oonn 22GG//22GG hhoossttss
+ 4. UML on 2G/2G hosts
- 44..11.. IInnttrroodduuccttiioonn
+ 4.1. Introduction
Most Linux machines are configured so that the kernel occupies the
@@ -546,7 +546,7 @@
- 44..22.. TThhee pprroobblleemm
+ 4.2. The problem
The prebuilt UML binaries on this site will not run on 2G/2G hosts
@@ -558,7 +558,7 @@
- 44..33.. TThhee ssoolluuttiioonn
+ 4.3. The solution
The fix for this is to rebuild UML from source after enabling
@@ -576,7 +576,7 @@
- 55.. SSeettttiinngg uupp sseerriiaall lliinneess aanndd ccoonnssoolleess
+ 5. Setting up serial lines and consoles
It is possible to attach UML serial lines and consoles to many types
@@ -586,12 +586,12 @@
You can attach them to host ptys, ttys, file descriptors, and ports.
This allows you to do things like
- +o have a UML console appear on an unused host console,
+ o have a UML console appear on an unused host console,
- +o hook two virtual machines together by having one attach to a pty
+ o hook two virtual machines together by having one attach to a pty
and having the other attach to the corresponding tty
- +o make a virtual machine accessible from the net by attaching a
+ o make a virtual machine accessible from the net by attaching a
console to a port on the host.
@@ -599,7 +599,7 @@
- 55..11.. SSppeecciiffyyiinngg tthhee ddeevviiccee
+ 5.1. Specifying the device
Devices are specified with "con" or "ssl" (console or serial line,
respectively), optionally with a device number if you are talking
@@ -626,13 +626,13 @@
- 55..22.. SSppeecciiffyyiinngg tthhee cchhaannnneell
+ 5.2. Specifying the channel
There are a number of different types of channels to attach a UML
device to, each with a different way of specifying exactly what to
attach to.
- +o pseudo-terminals - device=pty pts terminals - device=pts
+ o pseudo-terminals - device=pty pts terminals - device=pts
This will cause UML to allocate a free host pseudo-terminal for the
@@ -640,20 +640,20 @@
log. You access it by attaching a terminal program to the
corresponding tty:
- +o screen /dev/pts/n
+ o screen /dev/pts/n
- +o screen /dev/ttyxx
+ o screen /dev/ttyxx
- +o minicom -o -p /dev/ttyxx - minicom seems not able to handle pts
+ o minicom -o -p /dev/ttyxx - minicom seems not able to handle pts
devices
- +o kermit - start it up, 'open' the device, then 'connect'
+ o kermit - start it up, 'open' the device, then 'connect'
- +o terminals - device=tty:tty device file
+ o terminals - device=tty:tty device file
This will make UML attach the device to the specified tty (i.e
@@ -672,7 +672,7 @@
- +o xterms - device=xterm
+ o xterms - device=xterm
UML will run an xterm and the device will be attached to it.
@@ -681,7 +681,7 @@
- +o Port - device=port:port number
+ o Port - device=port:port number
This will attach the UML devices to the specified host port.
@@ -725,7 +725,7 @@
- +o already-existing file descriptors - device=file descriptor
+ o already-existing file descriptors - device=file descriptor
If you set up a file descriptor on the UML command line, you can
@@ -743,7 +743,7 @@
- +o Nothing - device=null
+ o Nothing - device=null
This allows the device to be opened, in contrast to 'none', but
@@ -754,7 +754,7 @@
- +o None - device=none
+ o None - device=none
This causes the device to disappear.
@@ -770,7 +770,7 @@
- will cause serial line 3 to accept input on the host's /dev/tty3 and
+ will cause serial line 3 to accept input on the host's /dev/tty2 and
display output on an xterm. That's a silly example - the most common
use of this syntax is to reattach the main console to stdin and stdout
as shown above.
@@ -785,7 +785,7 @@
- 55..33.. EExxaammpplleess
+ 5.3. Examples
There are a number of interesting things you can do with this
capability.
@@ -838,7 +838,7 @@
prompt of the other virtual machine.
- 66.. SSeettttiinngg uupp tthhee nneettwwoorrkk
+ 6. Setting up the network
@@ -858,19 +858,19 @@
There are currently five transport types available for a UML virtual
machine to exchange packets with other hosts:
- +o ethertap
+ o ethertap
- +o TUN/TAP
+ o TUN/TAP
- +o Multicast
+ o Multicast
- +o a switch daemon
+ o a switch daemon
- +o slip
+ o slip
- +o slirp
+ o slirp
- +o pcap
+ o pcap
The TUN/TAP, ethertap, slip, and slirp transports allow a UML
instance to exchange packets with the host. They may be directed
@@ -893,28 +893,28 @@
With so many host transports, which one should you use? Here's when
you should use each one:
- +o ethertap - if you want access to the host networking and it is
+ o ethertap - if you want access to the host networking and it is
running 2.2
- +o TUN/TAP - if you want access to the host networking and it is
+ o TUN/TAP - if you want access to the host networking and it is
running 2.4. Also, the TUN/TAP transport is able to use a
preconfigured device, allowing it to avoid using the setuid uml_net
helper, which is a security advantage.
- +o Multicast - if you want a purely virtual network and you don't want
+ o Multicast - if you want a purely virtual network and you don't want
to set up anything but the UML
- +o a switch daemon - if you want a purely virtual network and you
+ o a switch daemon - if you want a purely virtual network and you
don't mind running the daemon in order to get somewhat better
performance
- +o slip - there is no particular reason to run the slip backend unless
+ o slip - there is no particular reason to run the slip backend unless
ethertap and TUN/TAP are just not available for some reason
- +o slirp - if you don't have root access on the host to setup
+ o slirp - if you don't have root access on the host to setup
networking, or if you don't want to allocate an IP to your UML
- +o pcap - not much use for actual network connectivity, but great for
+ o pcap - not much use for actual network connectivity, but great for
monitoring traffic on the host
Ethertap is available on 2.4 and works fine. TUN/TAP is preferred
@@ -926,7 +926,7 @@
exploit the helper's root privileges.
- 66..11.. GGeenneerraall sseettuupp
+ 6.1. General setup
First, you must have the virtual network enabled in your UML. If are
running a prebuilt kernel from this site, everything is already
@@ -995,7 +995,7 @@
- 66..22.. UUsseerrssppaaccee ddaaeemmoonnss
+ 6.2. Userspace daemons
You will likely need the setuid helper, or the switch daemon, or both.
They are both installed with the RPM and deb, so if you've installed
@@ -1011,7 +1011,7 @@
- 66..33.. SSppeecciiffyyiinngg eetthheerrnneett aaddddrreesssseess
+ 6.3. Specifying ethernet addresses
Below, you will see that the TUN/TAP, ethertap, and daemon interfaces
allow you to specify hardware addresses for the virtual ethernet
@@ -1023,11 +1023,11 @@
sufficient to guarantee a unique hardware address for the device. A
couple of exceptions are:
- +o Another set of virtual ethernet devices are on the same network and
+ o Another set of virtual ethernet devices are on the same network and
they are assigned hardware addresses using a different scheme which
may conflict with the UML IP address-based scheme
- +o You aren't going to use the device for IP networking, so you don't
+ o You aren't going to use the device for IP networking, so you don't
assign the device an IP address
If you let the driver provide the hardware address, you should make
@@ -1049,7 +1049,7 @@
- 66..44.. UUMMLL iinntteerrffaaccee sseettuupp
+ 6.4. UML interface setup
Once the network devices have been described on the command line, you
should boot UML and log in.
@@ -1131,7 +1131,7 @@
- 66..55.. MMuullttiiccaasstt
+ 6.5. Multicast
The simplest way to set up a virtual network between multiple UMLs is
to use the mcast transport. This was written by Harald Welte and is
@@ -1194,7 +1194,7 @@
- 66..66.. TTUUNN//TTAAPP wwiitthh tthhee uummll__nneett hheellppeerr
+ 6.6. TUN/TAP with the uml_net helper
TUN/TAP is the preferred mechanism on 2.4 to exchange packets with the
host. The TUN/TAP backend has been in UML since 2.4.9-3um.
@@ -1247,10 +1247,10 @@
There are a couple potential problems with running the TUN/TAP
transport on a 2.4 host kernel
- +o TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host
+ o TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host
kernel or use the ethertap transport.
- +o With an upgraded kernel, TUN/TAP may fail with
+ o With an upgraded kernel, TUN/TAP may fail with
File descriptor in bad state
@@ -1269,7 +1269,7 @@
- 66..77.. TTUUNN//TTAAPP wwiitthh aa pprreeccoonnffiigguurreedd ttaapp ddeevviiccee
+ 6.7. TUN/TAP with a preconfigured tap device
If you prefer not to have UML use uml_net (which is somewhat
insecure), with UML 2.4.17-11, you can set up a TUN/TAP device
@@ -1277,7 +1277,7 @@
there is no need for root assistance. Setting up the device is done
as follows:
- +o Create the device with tunctl (available from the UML utilities
+ o Create the device with tunctl (available from the UML utilities
tarball)
@@ -1291,7 +1291,7 @@
where uid is the user id or username that UML will be run as. This
will tell you what device was created.
- +o Configure the device IP (change IP addresses and device name to
+ o Configure the device IP (change IP addresses and device name to
suit)
@@ -1303,7 +1303,7 @@
- +o Set up routing and arping if desired - this is my recipe, there are
+ o Set up routing and arping if desired - this is my recipe, there are
other ways of doing the same thing
@@ -1338,7 +1338,7 @@
utility which reads the information from a config file and sets up
devices at boot time.
- +o Rather than using up two IPs and ARPing for one of them, you can
+ o Rather than using up two IPs and ARPing for one of them, you can
also provide direct access to your LAN by the UML by using a
bridge.
@@ -1417,7 +1417,7 @@
Note that 'br0' should be setup using ifconfig with the existing IP
address of eth0, as eth0 no longer has its own IP.
- +o
+ o
Also, the /dev/net/tun device must be writable by the user running
@@ -1438,11 +1438,11 @@
devices and chgrp /dev/net/tun to that group with mode 664 or 660.
- +o Once the device is set up, run UML with 'eth0=tuntap,device name'
+ o Once the device is set up, run UML with 'eth0=tuntap,device name'
(i.e. 'eth0=tuntap,tap0') on the command line (or do it with the
mconsole config command).
- +o Bring the eth device up in UML and you're in business.
+ o Bring the eth device up in UML and you're in business.
If you don't want that tap device any more, you can make it non-
persistent with
@@ -1465,7 +1465,7 @@
- 66..88.. EEtthheerrttaapp
+ 6.8. Ethertap
Ethertap is the general mechanism on 2.2 for userspace processes to
exchange packets with the kernel.
@@ -1561,9 +1561,9 @@
- 66..99.. TThhee sswwiittcchh ddaaeemmoonn
+ 6.9. The switch daemon
- NNoottee: This is the daemon formerly known as uml_router, but which was
+ Note: This is the daemon formerly known as uml_router, but which was
renamed so the network weenies of the world would stop growling at me.
@@ -1649,7 +1649,7 @@
- 66..1100.. SSlliipp
+ 6.10. Slip
Slip is another, less general, mechanism for a process to communicate
with the host networking. In contrast to the ethertap interface,
@@ -1681,7 +1681,7 @@
- 66..1111.. SSlliirrpp
+ 6.11. Slirp
slirp uses an external program, usually /usr/bin/slirp, to provide IP
only networking connectivity through the host. This is similar to IP
@@ -1737,7 +1737,7 @@
- 66..1122.. ppccaapp
+ 6.12. pcap
The pcap transport is attached to a UML ethernet device on the command
line or with uml_mconsole with the following syntax:
@@ -1777,7 +1777,7 @@
- 66..1133.. SSeettttiinngg uupp tthhee hhoosstt yyoouurrsseellff
+ 6.13. Setting up the host yourself
If you don't specify an address for the host side of the ethertap or
slip device, UML won't do any setup on the host. So this is what is
@@ -1785,7 +1785,7 @@
192.168.0.251 and a UML-side IP of 192.168.0.250 - adjust to suit your
own network):
- +o The device needs to be configured with its IP address. Tap devices
+ o The device needs to be configured with its IP address. Tap devices
are also configured with an mtu of 1484. Slip devices are
configured with a point-to-point address pointing at the UML ip
address.
@@ -1805,7 +1805,7 @@
- +o If a tap device is being set up, a route is set to the UML IP.
+ o If a tap device is being set up, a route is set to the UML IP.
UML# route add -host 192.168.0.250 gw 192.168.0.251
@@ -1814,7 +1814,7 @@
- +o To allow other hosts on your network to see the virtual machine,
+ o To allow other hosts on your network to see the virtual machine,
proxy arp is set up for it.
@@ -1824,7 +1824,7 @@
- +o Finally, the host is set up to route packets.
+ o Finally, the host is set up to route packets.
host# echo 1 > /proc/sys/net/ipv4/ip_forward
@@ -1838,12 +1838,12 @@
- 77.. SShhaarriinngg FFiilleessyysstteemmss bbeettwweeeenn VViirrttuuaall MMaacchhiinneess
+ 7. Sharing Filesystems between Virtual Machines
- 77..11.. AA wwaarrnniinngg
+ 7.1. A warning
Don't attempt to share filesystems simply by booting two UMLs from the
same file. That's the same thing as booting two physical machines
@@ -1851,7 +1851,7 @@
- 77..22.. UUssiinngg llaayyeerreedd bblloocckk ddeevviicceess
+ 7.2. Using layered block devices
The way to share a filesystem between two virtual machines is to use
the copy-on-write (COW) layering capability of the ubd block driver.
@@ -1896,7 +1896,7 @@
- 77..33.. NNoottee!!
+ 7.3. Note!
When checking the size of the COW file in order to see the gobs of
space that you're saving, make sure you use 'ls -ls' to see the actual
@@ -1926,7 +1926,7 @@
- 77..44.. AAnnootthheerr wwaarrnniinngg
+ 7.4. Another warning
Once a filesystem is being used as a readonly backing file for a COW
file, do not boot directly from it or modify it in any way. Doing so
@@ -1952,7 +1952,7 @@
- 77..55.. uummll__mmoooo :: MMeerrggiinngg aa CCOOWW ffiillee wwiitthh iittss bbaacckkiinngg ffiillee
+ 7.5. uml_moo : Merging a COW file with its backing file
Depending on how you use UML and COW devices, it may be advisable to
merge the changes in the COW file into the backing file every once in
@@ -2001,7 +2001,7 @@
- 88.. CCrreeaattiinngg ffiilleessyysstteemmss
+ 8. Creating filesystems
You may want to create and mount new UML filesystems, either because
@@ -2015,7 +2015,7 @@
should be easy to translate to the filesystem of your choice.
- 88..11.. CCrreeaattee tthhee ffiilleessyysstteemm ffiillee
+ 8.1. Create the filesystem file
dd is your friend. All you need to do is tell dd to create an empty
file of the appropriate size. I usually make it sparse to save time
@@ -2032,7 +2032,7 @@
- 88..22.. AAssssiiggnn tthhee ffiillee ttoo aa UUMMLL ddeevviiccee
+ 8.2. Assign the file to a UML device
Add an argument like the following to the UML command line:
@@ -2045,7 +2045,7 @@
- 88..33.. CCrreeaattiinngg aanndd mmoouunnttiinngg tthhee ffiilleessyysstteemm
+ 8.3. Creating and mounting the filesystem
Make sure that the filesystem is available, either by being built into
the kernel, or available as a module, then boot up UML and log in. If
@@ -2096,7 +2096,7 @@
- 99.. HHoosstt ffiillee aacccceessss
+ 9. Host file access
If you want to access files on the host machine from inside UML, you
@@ -2112,7 +2112,7 @@
files contained in it just as you would on the host.
- 99..11.. UUssiinngg hhoossttffss
+ 9.1. Using hostfs
To begin with, make sure that hostfs is available inside the virtual
machine with
@@ -2151,7 +2151,7 @@
- 99..22.. hhoossttffss aass tthhee rroooott ffiilleessyysstteemm
+ 9.2. hostfs as the root filesystem
It's possible to boot from a directory hierarchy on the host using
hostfs rather than using the standard filesystem in a file.
@@ -2194,20 +2194,20 @@
UML should then boot as it does normally.
- 99..33.. BBuuiillddiinngg hhoossttffss
+ 9.3. Building hostfs
If you need to build hostfs because it's not in your kernel, you have
two choices:
- +o Compiling hostfs into the kernel:
+ o Compiling hostfs into the kernel:
Reconfigure the kernel and set the 'Host filesystem' option under
- +o Compiling hostfs as a module:
+ o Compiling hostfs as a module:
Reconfigure the kernel and set the 'Host filesystem' option under
@@ -2228,7 +2228,7 @@
- 1100.. TThhee MMaannaaggeemmeenntt CCoonnssoollee
+ 10. The Management Console
@@ -2240,15 +2240,15 @@
There are a number of things you can do with the mconsole interface:
- +o get the kernel version
+ o get the kernel version
- +o add and remove devices
+ o add and remove devices
- +o halt or reboot the machine
+ o halt or reboot the machine
- +o Send SysRq commands
+ o Send SysRq commands
- +o Pause and resume the UML
+ o Pause and resume the UML
You need the mconsole client (uml_mconsole) which is present in CVS
@@ -2300,28 +2300,28 @@
You'll get a prompt, at which you can run one of these commands:
- +o version
+ o version
- +o halt
+ o halt
- +o reboot
+ o reboot
- +o config
+ o config
- +o remove
+ o remove
- +o sysrq
+ o sysrq
- +o help
+ o help
- +o cad
+ o cad
- +o stop
+ o stop
- +o go
+ o go
- 1100..11.. vveerrssiioonn
+ 10.1. version
This takes no arguments. It prints the UML version.
@@ -2342,7 +2342,7 @@
- 1100..22.. hhaalltt aanndd rreebboooott
+ 10.2. halt and reboot
These take no arguments. They shut the machine down immediately, with
no syncing of disks and no clean shutdown of userspace. So, they are
@@ -2357,7 +2357,7 @@
- 1100..33.. ccoonnffiigg
+ 10.3. config
"config" adds a new device to the virtual machine. Currently the ubd
and network drivers support this. It takes one argument, which is the
@@ -2378,7 +2378,7 @@
- 1100..44.. rreemmoovvee
+ 10.4. remove
"remove" deletes a device from the system. Its argument is just the
name of the device to be removed. The device must be idle in whatever
@@ -2397,7 +2397,7 @@
- 1100..55.. ssyyssrrqq
+ 10.5. sysrq
This takes one argument, which is a single letter. It calls the
generic kernel's SysRq driver, which does whatever is called for by
@@ -2407,14 +2407,14 @@
- 1100..66.. hheellpp
+ 10.6. help
"help" returns a string listing the valid commands and what each one
does.
- 1100..77.. ccaadd
+ 10.7. cad
This invokes the Ctl-Alt-Del action on init. What exactly this ends
up doing is up to /etc/inittab. Normally, it reboots the machine.
@@ -2432,7 +2432,7 @@
- 1100..88.. ssttoopp
+ 10.8. stop
This puts the UML in a loop reading mconsole requests until a 'go'
mconsole command is received. This is very useful for making backups
@@ -2448,7 +2448,7 @@
- 1100..99.. ggoo
+ 10.9. go
This resumes a UML after being paused by a 'stop' command. Note that
when the UML has resumed, TCP connections may have timed out and if
@@ -2462,10 +2462,10 @@
- 1111.. KKeerrnneell ddeebbuuggggiinngg
+ 11. Kernel debugging
- NNoottee:: The interface that makes debugging, as described here, possible
+ Note: The interface that makes debugging, as described here, possible
is present in 2.4.0-test6 kernels and later.
@@ -2485,7 +2485,7 @@
- 1111..11.. SSttaarrttiinngg tthhee kkeerrnneell uunnddeerr ggddbb
+ 11.1. Starting the kernel under gdb
You can have the kernel running under the control of gdb from the
beginning by putting 'debug' on the command line. You will get an
@@ -2498,7 +2498,7 @@
There is a transcript of a debugging session here <debug-
session.html> , with breakpoints being set in the scheduler and in an
interrupt handler.
- 1111..22.. EExxaammiinniinngg sslleeeeppiinngg pprroocceesssseess
+ 11.2. Examining sleeping processes
Not every bug is evident in the currently running process. Sometimes,
processes hang in the kernel when they shouldn't because they've
@@ -2516,7 +2516,7 @@
Now what you do is this:
- +o detach from the current thread
+ o detach from the current thread
(UML gdb) det
@@ -2525,7 +2525,7 @@
- +o attach to the thread you are interested in
+ o attach to the thread you are interested in
(UML gdb) att <host pid>
@@ -2534,7 +2534,7 @@
- +o look at its stack and anything else of interest
+ o look at its stack and anything else of interest
(UML gdb) bt
@@ -2545,7 +2545,7 @@
Note that you can't do anything at this point that requires that a
process execute, e.g. calling a function
- +o when you're done looking at that process, reattach to the current
+ o when you're done looking at that process, reattach to the current
thread and continue it
@@ -2569,12 +2569,12 @@
- 1111..33.. RRuunnnniinngg dddddd oonn UUMMLL
+ 11.3. Running ddd on UML
ddd works on UML, but requires a special kludge. The process goes
like this:
- +o Start ddd
+ o Start ddd
host% ddd linux
@@ -2583,14 +2583,14 @@
- +o With ps, get the pid of the gdb that ddd started. You can ask the
+ o With ps, get the pid of the gdb that ddd started. You can ask the
gdb to tell you, but for some reason that confuses things and
causes a hang.
- +o run UML with 'debug=parent gdb-pid=<pid>' added to the command line
+ o run UML with 'debug=parent gdb-pid=<pid>' added to the command line
- it will just sit there after you hit return
- +o type 'att 1' to the ddd gdb and you will see something like
+ o type 'att 1' to the ddd gdb and you will see something like
0xa013dc51 in __kill ()
@@ -2602,12 +2602,12 @@
- +o At this point, type 'c', UML will boot up, and you can use ddd just
+ o At this point, type 'c', UML will boot up, and you can use ddd just
as you do on any other process.
- 1111..44.. DDeebbuuggggiinngg mmoodduulleess
+ 11.4. Debugging modules
gdb has support for debugging code which is dynamically loaded into
the process. This support is what is needed to debug kernel modules
@@ -2823,7 +2823,7 @@
- 1111..55.. AAttttaacchhiinngg ggddbb ttoo tthhee kkeerrnneell
+ 11.5. Attaching gdb to the kernel
If you don't have the kernel running under gdb, you can attach gdb to
it later by sending the tracing thread a SIGUSR1. The first line of
@@ -2857,7 +2857,7 @@
- 1111..66.. UUssiinngg aalltteerrnnaattee ddeebbuuggggeerrss
+ 11.6. Using alternate debuggers
UML has support for attaching to an already running debugger rather
than starting gdb itself. This is present in CVS as of 17 Apr 2001.
@@ -2886,7 +2886,7 @@
An example of an alternate debugger is strace. You can strace the
actual kernel as follows:
- +o Run the following in a shell
+ o Run the following in a shell
host%
@@ -2894,10 +2894,10 @@
- +o Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out
+ o Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out
by the previous command
- +o Hit return in the shell, and UML will start running, and strace
+ o Hit return in the shell, and UML will start running, and strace
output will start accumulating in the output file.
Note that this is different from running
@@ -2917,9 +2917,9 @@
- 1122.. KKeerrnneell ddeebbuuggggiinngg eexxaammpplleess
+ 12. Kernel debugging examples
- 1122..11.. TThhee ccaassee ooff tthhee hhuunngg ffsscckk
+ 12.1. The case of the hung fsck
When booting up the kernel, fsck failed, and dropped me into a shell
to fix things up. I ran fsck -y, which hung:
@@ -3154,9 +3154,9 @@
The interesting things here are :
- +o There are two segfaults on this stack (frames 9 and 14)
+ o There are two segfaults on this stack (frames 9 and 14)
- +o The first faulting address (frame 11) is 0x50000800
+ o The first faulting address (frame 11) is 0x50000800
(gdb) p (void *)1342179328
$16 = (void *) 0x50000800
@@ -3399,7 +3399,7 @@
on will be somewhat clearer.
- 1122..22.. EEppiissooddee 22:: TThhee ccaassee ooff tthhee hhuunngg ffsscckk
+ 12.2. Episode 2: The case of the hung fsck
After setting a trap in the SEGV handler for accesses to the signal
thread's stack, I reran the kernel.
@@ -3788,12 +3788,12 @@
- 1133.. WWhhaatt ttoo ddoo wwhheenn UUMMLL ddooeessnn''tt wwoorrkk
+ 13. What to do when UML doesn't work
- 1133..11.. SSttrraannggee ccoommppiillaattiioonn eerrrroorrss wwhheenn yyoouu bbuuiilldd ffrroomm ssoouurrccee
+ 13.1. Strange compilation errors when you build from source
As of test11, it is necessary to have "ARCH=um" in the environment or
on the make command line for all steps in building UML, including
@@ -3824,8 +3824,8 @@
- 1133..33.. AA vvaarriieettyy ooff ppaanniiccss aanndd hhaannggss wwiitthh //ttmmpp oonn aa rreeiisseerrffss ffiilleessyyss--
- tteemm
+ 13.3. A variety of panics and hangs with /tmp on a reiserfs filesys-
+ tem
I saw this on reiserfs 3.5.21 and it seems to be fixed in 3.5.27.
Panics preceded by
@@ -3842,8 +3842,8 @@
- 1133..44.. TThhee ccoommppiillee ffaaiillss wwiitthh eerrrroorrss aabboouutt ccoonnfflliiccttiinngg ttyyppeess ffoorr
- ''ooppeenn'',, ''dduupp'',, aanndd ''wwaaiittppiidd''
+ 13.4. The compile fails with errors about conflicting types for
+ 'open', 'dup', and 'waitpid'
This happens when you build in /usr/src/linux. The UML build makes
the include/asm link point to include/asm-um. /usr/include/asm points
@@ -3854,14 +3854,14 @@
- 1133..55.. UUMMLL ddooeessnn''tt wwoorrkk wwhheenn //ttmmpp iiss aann NNFFSS ffiilleessyysstteemm
+ 13.5. UML doesn't work when /tmp is an NFS filesystem
This seems to be a similar situation with the ReiserFS problem above.
Some versions of NFS seems not to handle mmap correctly, which UML
depends on. The workaround is have /tmp be a non-NFS directory.
- 1133..66.. UUMMLL hhaannggss oonn bboooott wwhheenn ccoommppiilleedd wwiitthh ggpprrooff ssuuppppoorrtt
+ 13.6. UML hangs on boot when compiled with gprof support
If you build UML with gprof support and, early in the boot, it does
this
@@ -3878,7 +3878,7 @@
- 1133..77.. ssyyssllooggdd ddiieess wwiitthh aa SSIIGGTTEERRMM oonn ssttaarrttuupp
+ 13.7. syslogd dies with a SIGTERM on startup
The exact boot error depends on the distribution that you're booting,
but Debian produces this:
@@ -3897,17 +3897,17 @@
- 1133..88.. TTUUNN//TTAAPP nneettwwoorrkkiinngg ddooeessnn''tt wwoorrkk oonn aa 22..44 hhoosstt
+ 13.8. TUN/TAP networking doesn't work on a 2.4 host
There are a couple of problems which were
<http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="pointed
out"> by Tim Robinson <timro at trkr dot net>
- +o It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier.
+ o It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier.
The fix is to upgrade to something more recent and then read the
next item.
- +o If you see
+ o If you see
File descriptor in bad state
@@ -3921,8 +3921,8 @@
- 1133..99.. YYoouu ccaann nneettwwoorrkk ttoo tthhee hhoosstt bbuutt nnoott ttoo ootthheerr mmaacchhiinneess oonn tthhee
- nneett
+ 13.9. You can network to the host but not to other machines on the
+ net
If you can connect to the host, and the host can connect to UML, but
you cannot connect to any other machines, then you may need to enable
@@ -3972,7 +3972,7 @@
- 1133..1100.. II hhaavvee nnoo rroooott aanndd II wwaanntt ttoo ssccrreeaamm
+ 13.10. I have no root and I want to scream
Thanks to Birgit Wahlich for telling me about this strange one. It
turns out that there's a limit of six environment variables on the
@@ -3987,7 +3987,7 @@
- 1133..1111.. UUMMLL bbuuiilldd ccoonnfflliicctt bbeettwweeeenn ppttrraaccee..hh aanndd uuccoonntteexxtt..hh
+ 13.11. UML build conflict between ptrace.h and ucontext.h
On some older systems, /usr/include/asm/ptrace.h and
/usr/include/sys/ucontext.h define the same names. So, when they're
@@ -4007,7 +4007,7 @@
- 1133..1122.. TThhee UUMMLL BBooggooMMiippss iiss eexxaaccttllyy hhaallff tthhee hhoosstt''ss BBooggooMMiippss
+ 13.12. The UML BogoMips is exactly half the host's BogoMips
On i386 kernels, there are two ways of running the loop that is used
to calculate the BogoMips rating, using the TSC if it's there or using
@@ -4019,7 +4019,7 @@
- 1133..1133.. WWhheenn yyoouu rruunn UUMMLL,, iitt iimmmmeeddiiaatteellyy sseeggffaauullttss
+ 13.13. When you run UML, it immediately segfaults
If the host is configured with the 2G/2G address space split, that's
why. See ``UML on 2G/2G hosts'' for the details on getting UML to
@@ -4027,7 +4027,7 @@
- 1133..1144.. xxtteerrmmss aappppeeaarr,, tthheenn iimmmmeeddiiaatteellyy ddiissaappppeeaarr
+ 13.14. xterms appear, then immediately disappear
If you're running an up to date kernel with an old release of
uml_utilities, the port-helper program will not work properly, so
@@ -4039,7 +4039,7 @@
- 1133..1155.. AAnnyy ootthheerr ppaanniicc,, hhaanngg,, oorr ssttrraannggee bbeehhaavviioorr
+ 13.15. Any other panic, hang, or strange behavior
If you're seeing truly strange behavior, such as hangs or panics that
happen in random places, or you try running the debugger to see what's
@@ -4059,7 +4059,7 @@
If you want to be super-helpful, read ``Diagnosing Problems'' and
follow the instructions contained therein.
- 1144.. DDiiaaggnnoossiinngg PPrroobblleemmss
+ 14. Diagnosing Problems
If you get UML to crash, hang, or otherwise misbehave, you should
@@ -4078,7 +4078,7 @@
``Kernel debugging'' UML first.
- 1144..11.. CCaassee 11 :: NNoorrmmaall kkeerrnneell ppaanniiccss
+ 14.1. Case 1 : Normal kernel panics
The most common case is for a normal thread to panic. To debug this,
you will need to run it under the debugger (add 'debug' to the command
@@ -4128,7 +4128,7 @@
to get that information from the faulting ip.
- 1144..22.. CCaassee 22 :: TTrraacciinngg tthhrreeaadd ppaanniiccss
+ 14.2. Case 2 : Tracing thread panics
The less common and more painful case is when the tracing thread
panics. In this case, the kernel debugger will be useless because it
@@ -4161,7 +4161,7 @@
backtrace in and wait for our crack debugging team to fix the problem.
- 1144..33.. CCaassee 33 :: TTrraacciinngg tthhrreeaadd ppaanniiccss ccaauusseedd bbyy ootthheerr tthhrreeaaddss
+ 14.3. Case 3 : Tracing thread panics caused by other threads
However, there are cases where the misbehavior of another thread
caused the problem. The most common panic of this type is:
@@ -4227,7 +4227,7 @@
- 1144..44.. CCaassee 44 :: HHaannggss
+ 14.4. Case 4 : Hangs
Hangs seem to be fairly rare, but they sometimes happen. When a hang
happens, we need a backtrace from the offending process. Run the
@@ -4257,7 +4257,7 @@
- 1155.. TThhaannkkss
+ 15. Thanks
A number of people have helped this project in various ways, and this
@@ -4274,20 +4274,20 @@
bookkeeping lapses and I forget about contributions.
- 1155..11.. CCooddee aanndd DDooccuummeennttaattiioonn
+ 15.1. Code and Documentation
Rusty Russell <rusty at linuxcare.com.au> -
- +o wrote the HOWTO <http://user-mode-
+ o wrote the HOWTO <http://user-mode-
linux.sourceforge.net/UserModeLinux-HOWTO.html>
- +o prodded me into making this project official and putting it on
+ o prodded me into making this project official and putting it on
SourceForge
- +o came up with the way cool UML logo <http://user-mode-
+ o came up with the way cool UML logo <http://user-mode-
linux.sourceforge.net/uml-small.png>
- +o redid the config process
+ o redid the config process
Peter Moulder <reiter at netspace.net.au> - Fixed my config and build
@@ -4296,18 +4296,18 @@
Bill Stearns <wstearns at pobox.com> -
- +o HOWTO updates
+ o HOWTO updates
- +o lots of bug reports
+ o lots of bug reports
- +o lots of testing
+ o lots of testing
- +o dedicated a box (uml.ists.dartmouth.edu) to support UML development
+ o dedicated a box (uml.ists.dartmouth.edu) to support UML development
- +o wrote the mkrootfs script, which allows bootable filesystems of
+ o wrote the mkrootfs script, which allows bootable filesystems of
RPM-based distributions to be cranked out
- +o cranked out a large number of filesystems with said script
+ o cranked out a large number of filesystems with said script
Jim Leu <jleu at mindspring.com> - Wrote the virtual ethernet driver
@@ -4375,176 +4375,176 @@
David Coulson <http://davidcoulson.net> -
- +o Set up the usermodelinux.org <http://usermodelinux.org> site,
+ o Set up the usermodelinux.org <http://usermodelinux.org> site,
which is a great way of keeping the UML user community on top of
UML goings-on.
- +o Site documentation and updates
+ o Site documentation and updates
- +o Nifty little UML management daemon UMLd
+ o Nifty little UML management daemon UMLd
<http://uml.openconsultancy.com/umld/>
- +o Lots of testing and bug reports
+ o Lots of testing and bug reports
- 1155..22.. FFlluusshhiinngg oouutt bbuuggss
+ 15.2. Flushing out bugs
- +o Yuri Pudgorodsky
+ o Yuri Pudgorodsky
- +o Gerald Britton
+ o Gerald Britton
- +o Ian Wehrman
+ o Ian Wehrman
- +o Gord Lamb
+ o Gord Lamb
- +o Eugene Koontz
+ o Eugene Koontz
- +o John H. Hartman
+ o John H. Hartman
- +o Anders Karlsson
+ o Anders Karlsson
- +o Daniel Phillips
+ o Daniel Phillips
- +o John Fremlin
+ o John Fremlin
- +o Rainer Burgstaller
+ o Rainer Burgstaller
- +o James Stevenson
+ o James Stevenson
- +o Matt Clay
+ o Matt Clay
- +o Cliff Jefferies
+ o Cliff Jefferies
- +o Geoff Hoff
+ o Geoff Hoff
- +o Lennert Buytenhek
+ o Lennert Buytenhek
- +o Al Viro
+ o Al Viro
- +o Frank Klingenhoefer
+ o Frank Klingenhoefer
- +o Livio Baldini Soares
+ o Livio Baldini Soares
- +o Jon Burgess
+ o Jon Burgess
- +o Petru Paler
+ o Petru Paler
- +o Paul
+ o Paul
- +o Chris Reahard
+ o Chris Reahard
- +o Sverker Nilsson
+ o Sverker Nilsson
- +o Gong Su
+ o Gong Su
- +o johan verrept
+ o johan verrept
- +o Bjorn Eriksson
+ o Bjorn Eriksson
- +o Lorenzo Allegrucci
+ o Lorenzo Allegrucci
- +o Muli Ben-Yehuda
+ o Muli Ben-Yehuda
- +o David Mansfield
+ o David Mansfield
- +o Howard Goff
+ o Howard Goff
- +o Mike Anderson
+ o Mike Anderson
- +o John Byrne
+ o John Byrne
- +o Sapan J. Batia
+ o Sapan J. Batia
- +o Iris Huang
+ o Iris Huang
- +o Jan Hudec
+ o Jan Hudec
- +o Voluspa
+ o Voluspa
- 1155..33.. BBuugglleettss aanndd cclleeaann--uuppss
+ 15.3. Buglets and clean-ups
- +o Dave Zarzycki
+ o Dave Zarzycki
- +o Adam Lazur
+ o Adam Lazur
- +o Boria Feigin
+ o Boria Feigin
- +o Brian J. Murrell
+ o Brian J. Murrell
- +o JS
+ o JS
- +o Roman Zippel
+ o Roman Zippel
- +o Wil Cooley
+ o Wil Cooley
- +o Ayelet Shemesh
+ o Ayelet Shemesh
- +o Will Dyson
+ o Will Dyson
- +o Sverker Nilsson
+ o Sverker Nilsson
- +o dvorak
+ o dvorak
- +o v.naga srinivas
+ o v.naga srinivas
- +o Shlomi Fish
+ o Shlomi Fish
- +o Roger Binns
+ o Roger Binns
- +o johan verrept
+ o johan verrept
- +o MrChuoi
+ o MrChuoi
- +o Peter Cleve
+ o Peter Cleve
- +o Vincent Guffens
+ o Vincent Guffens
- +o Nathan Scott
+ o Nathan Scott
- +o Patrick Caulfield
+ o Patrick Caulfield
- +o jbearce
+ o jbearce
- +o Catalin Marinas
+ o Catalin Marinas
- +o Shane Spencer
+ o Shane Spencer
- +o Zou Min
+ o Zou Min
- +o Ryan Boder
+ o Ryan Boder
- +o Lorenzo Colitti
+ o Lorenzo Colitti
- +o Gwendal Grignou
+ o Gwendal Grignou
- +o Andre' Breiler
+ o Andre' Breiler
- +o Tsutomu Yasuda
+ o Tsutomu Yasuda
- 1155..44.. CCaassee SSttuuddiieess
+ 15.4. Case Studies
- +o Jon Wright
+ o Jon Wright
- +o William McEwan
+ o William McEwan
- +o Michael Richardson
+ o Michael Richardson
- 1155..55.. OOtthheerr ccoonnttrriibbuuttiioonnss
+ 15.5. Other contributions
Bill Carr <Bill.Carr at compaq.com> made the Red Hat mkrootfs script
diff --git a/Documentation/x86/entry_64.txt b/Documentation/x86/entry_64.txt
index 7869f14..bc7226e 100644
--- a/Documentation/x86/entry_64.txt
+++ b/Documentation/x86/entry_64.txt
@@ -27,9 +27,6 @@
magically-generated functions that make their way to do_IRQ with
the interrupt number as a parameter.
- - emulate_vsyscall: int 0xcc, a special non-ABI entry used by
- vsyscall emulation.
-
- APIC interrupts: Various special-purpose interrupts for things
like TLB shootdown.
diff --git a/MAINTAINERS b/MAINTAINERS
index 27af9c9..ab77670 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -316,6 +316,10 @@
S: Supported
F: drivers/input/touchscreen/ad7879.c
+ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
+M: Jiri Kosina <jkosina@suse.cz>
+S: Maintained
+
ADM1025 HARDWARE MONITOR DRIVER
M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
@@ -529,6 +533,7 @@
F: drivers/infiniband/hw/amso1100/
ANALOG DEVICES INC ASOC CODEC DRIVERS
+M: Lars-Peter Clausen <lars@metafoo.de>
L: device-drivers-devel@blackfin.uclinux.org
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://wiki.analog.com/
@@ -687,6 +692,12 @@
F: drivers/mtd/nand/bcm_umi_bch.c
F: drivers/mtd/nand/nand_bcm_umi.h
+ARM/CALXEDA HIGHBANK ARCHITECTURE
+M: Rob Herring <rob.herring@calxeda.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-highbank/
+
ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
M: Anton Vorontsov <avorontsov@mvista.com>
S: Maintained
@@ -786,6 +797,13 @@
S: Maintained
F: arch/arm/mach-mx5/
+ARM/FREESCALE IMX6
+M: Shawn Guo <shawn.guo@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F: arch/arm/mach-imx/*imx6*
+
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1084,6 +1102,24 @@
F: arch/arm/plat-samsung/include/plat/*fimc*
F: drivers/media/video/s5p-fimc/
+ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+M: Kamil Debski <k.debski@samsung.com>
+L: linux-arm-kernel@lists.infradead.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: arch/arm/plat-s5p/dev-mfc.c
+F: drivers/media/video/s5p-mfc/
+
+ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+M: Tomasz Stanislawski <t.stanislaws@samsung.com>
+L: linux-arm-kernel@lists.infradead.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: arch/arm/plat-s5p/dev-tv.c
+F: drivers/media/video/s5p-tv/
+
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
@@ -2431,8 +2467,6 @@
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i7core_edac.c
-F: drivers/edac/edac_mce.c
-F: include/linux/edac_mce.h
EDAC-I82975X
M: Ranganathan Desikan <ravi@jetztechnologies.com>
@@ -2456,6 +2490,13 @@
S: Maintained
F: drivers/edac/r82600_edac.c
+EDAC-SBRIDGE
+M: Mauro Carvalho Chehab <mchehab@redhat.com>
+L: linux-edac@vger.kernel.org
+W: bluesmoke.sourceforge.net
+S: Maintained
+F: drivers/edac/sb_edac.c
+
EDIROL UA-101/UA-1000 DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -2977,6 +3018,13 @@
F: drivers/char/hw_random/
F: include/linux/hw_random.h
+HARDWARE SPINLOCK CORE
+M: Ohad Ben-Cohen <ohad@wizery.com>
+S: Maintained
+F: Documentation/hwspinlock.txt
+F: drivers/hwspinlock/hwspinlock_*
+F: include/linux/hwspinlock.h
+
HARMONY SOUND DRIVER
M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
@@ -3169,8 +3217,7 @@
M: Tony Luck <tony.luck@intel.com>
M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-ia64@vger.kernel.org
-W: http://www.ia64-linux.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
S: Maintained
F: arch/ia64/
@@ -3208,6 +3255,13 @@
F: drivers/ide/
F: include/linux/ide.h
+IDEAPAD LAPTOP EXTRAS DRIVER
+M: Ike Panhc <ike.pan@canonical.com>
+L: platform-driver-x86@vger.kernel.org
+W: http://launchpad.net/ideapad-laptop
+S: Maintained
+F: drivers/platform/x86/ideapad-laptop.c
+
IDE/ATAPI DRIVERS
M: Borislav Petkov <petkovbb@gmail.com>
L: linux-ide@vger.kernel.org
@@ -3994,6 +4048,7 @@
S: Maintained
F: Documentation/misc-devices/lis3lv02d
F: drivers/misc/lis3lv02d/
+F: drivers/platform/x86/hp_accel.c
LLC (802.2)
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
@@ -4666,6 +4721,13 @@
F: drivers/video/omap2/
F: Documentation/arm/OMAP/DSS
+OMAP HARDWARE SPINLOCK SUPPORT
+M: Ohad Ben-Cohen <ohad@wizery.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/hwspinlock/omap_hwspinlock.c
+F: arch/arm/mach-omap2/hwspinlock.c
+
OMAP MMC SUPPORT
M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
L: linux-omap@vger.kernel.org
@@ -4760,10 +4822,12 @@
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Grant Likely <grant.likely@secretlab.ca>
+M: Rob Herring <rob.herring@calxeda.com>
L: devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
W: http://fdt.secretlab.ca
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
+F: Documentation/devicetree
F: drivers/of
F: include/linux/of*.h
K: of_get_property
@@ -4946,7 +5010,7 @@
F: include/linux/i2c-pca-platform.h
PCI ERROR RECOVERY
-M: Linas Vepstas <linas@austin.ibm.com>
+M: Linas Vepstas <linasvepstas@gmail.com>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
@@ -5326,6 +5390,12 @@
F: include/linux/qnx4_fs.h
F: include/linux/qnxtypes.h
+QUALCOMM HEXAGON ARCHITECTURE
+M: Richard Kuo <rkuo@codeaurora.org>
+L: linux-hexagon@vger.kernel.org
+S: Supported
+F: arch/hexagon/
+
RADOS BLOCK DEVICE (RBD)
F: include/linux/qnxtypes.h
M: Yehuda Sadeh <yehuda@hq.newdream.net>
@@ -5967,6 +6037,12 @@
S: Supported
F: drivers/net/ethernet/smsc/smsc9420.*
+SMSC UFX6000 and UFX7000 USB to VGA DRIVER
+M: Steve Glendinning <steve.glendinning@smsc.com>
+L: linux-fbdev@vger.kernel.org
+S: Supported
+F: drivers/video/smscufx.c
+
SN-IA64 (Itanium) SUB-PLATFORM
M: Jes Sorensen <jes@sgi.com>
L: linux-altix@sgi.com
@@ -6036,7 +6112,7 @@
M: Takashi Iwai <tiwai@suse.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://www.alsa-project.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
T: git git://git.alsa-project.org/alsa-kernel.git
S: Maintained
F: Documentation/sound/
@@ -6625,7 +6701,6 @@
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
-W: http://linux-udf.sourceforge.net
S: Maintained
F: Documentation/filesystems/udf.txt
F: fs/udf/
@@ -7257,6 +7332,7 @@
W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
+F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/leds/leds-wm83*.c
F: drivers/input/misc/wm831x-on.c
F: drivers/input/touchscreen/wm831x-ts.c
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 4ac48a0..2207fc6 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -457,10 +457,12 @@
#define __NR_clock_adjtime 499
#define __NR_syncfs 500
#define __NR_setns 501
+#define __NR_accept4 502
+#define __NR_sendmmsg 503
#ifdef __KERNEL__
-#define NR_SYSCALLS 502
+#define NR_SYSCALLS 504
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 6acea1f..e534e1c 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -520,6 +520,8 @@
.quad sys_clock_adjtime
.quad sys_syncfs /* 500 */
.quad sys_setns
+ .quad sys_accept4
+ .quad sys_sendmmsg
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8090cad..fe6b052 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -29,6 +29,7 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select GENERIC_IRQ_SHOW
+ select CPU_PM if (SUSPEND || CPU_IDLE)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -211,6 +212,19 @@
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
+config NEED_MACH_MEMORY_H
+ bool
+ help
+ Select this when mach/memory.h is required to provide special
+ definitions for this platform. The need for mach/memory.h should
+ be avoided when possible.
+
+config PHYS_OFFSET
+ hex "Physical address of main memory"
+ depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ help
+ Please provide the physical address corresponding to the
+ location of main memory in your system.
config GENERIC_BUG
def_bool y
@@ -247,6 +261,7 @@
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
+ select NEED_MACH_MEMORY_H
help
Support for ARM's Integrator platform.
@@ -262,6 +277,7 @@
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
+ select NEED_MACH_MEMORY_H
help
This enables support for ARM Ltd RealView boards.
@@ -318,10 +334,25 @@
help
Support for Broadcom's BCMRing platform.
+config ARCH_HIGHBANK
+ bool "Calxeda Highbank-based"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select USE_OF
+ help
+ Support for the Calxeda Highbank SoC based boards.
+
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Cirrus Logic 711x/721x based boards.
@@ -361,6 +392,7 @@
select ISA
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
@@ -376,6 +408,7 @@
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -385,6 +418,7 @@
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
select HAVE_IDE
+ select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -397,6 +431,7 @@
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select HAVE_SCHED_CLOCK
+ select MULTI_IRQ_HANDLER
help
Support for Freescale MXC/iMX-based family of processors
@@ -434,6 +469,7 @@
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IOP13XX (XScale) family of processors.
@@ -464,6 +500,7 @@
select CPU_XSC3
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP23xx (XScale) family of processors.
@@ -473,6 +510,7 @@
select CPU_XSCALE
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
@@ -565,6 +603,7 @@
select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
@@ -585,14 +624,6 @@
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-config ARCH_NUC93X
- bool "Nuvoton NUC93X CPU"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- help
- Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
- low-power and high performance MPEG-4/JPEG multimedia controller chip.
-
config ARCH_TEGRA
bool "NVIDIA Tegra"
select CLKDEV_LOOKUP
@@ -606,6 +637,24 @@
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
+config ARCH_PICOXCELL
+ bool "Picochip picoXcell"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_SCHED_CLOCK
+ select HAVE_TCM
+ select NO_IOPORT
+ select USE_OF
+ help
+ This enables support for systems based on the Picochip picoXcell
+ family of Femtocell devices. The picoxcell support requires device tree
+ for all boards.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
@@ -657,6 +706,7 @@
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
select PM_GENERIC_DOMAINS if PM
+ select NEED_MACH_MEMORY_H
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
@@ -672,6 +722,7 @@
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
select HAVE_IDE
+ select NEED_MACH_MEMORY_H
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -691,6 +742,7 @@
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
+ select NEED_MACH_MEMORY_H
help
Support for StrongARM 11x0 based boards.
@@ -782,6 +834,7 @@
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
@@ -798,6 +851,7 @@
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
Samsung EXYNOS4 series based systems
@@ -809,6 +863,7 @@
select ZONE_DMA
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -831,11 +886,14 @@
select HAVE_SCHED_CLOCK
select HAVE_TCM
select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -979,8 +1037,6 @@
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
-source "arch/arm/mach-nuc93x/Kconfig"
-
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
@@ -1374,7 +1430,7 @@
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
+ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
depends on MMU
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
@@ -1834,6 +1890,38 @@
endchoice
+config ARM_APPENDED_DTB
+ bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+ depends on OF && !ZBOOT_ROM && EXPERIMENTAL
+ help
+ With this option, the boot code will look for a device tree binary
+ (DTB) appended to zImage
+ (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to zImage. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB. Proper passing of the
+ location into r2 of a bootloader provided DTB is always preferable
+ to this option.
+
+config ARM_ATAG_DTB_COMPAT
+ bool "Supplement the appended DTB with traditional ATAG information"
+ depends on ARM_APPENDED_DTB
+ help
+ Some old bootloaders can't be updated to a DTB capable one, yet
+ they provide ATAGs with memory configuration, the ramdisk address,
+ the kernel cmdline string, etc. Such information is dynamically
+ provided by the bootloader and can't always be stored in a static
+ DTB. To allow a device tree enabled kernel to be used with such
+ bootloaders, this option allows zImage to extract the information
+ from the ATAG list and store it at run time into the appended DTB.
+
config CMDLINE
string "Default kernel command string"
default ""
@@ -1980,6 +2068,7 @@
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
+ select CPU_FREQ_TABLE
select CPU_FREQ_DEFAULT_GOV_USERSPACE
config CPU_FREQ_S3C
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index df3eb3c..c5213e7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -128,6 +128,125 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_HIGHBANK_UART
+ bool "Kernel low-level debugging messages via Highbank UART"
+ depends on ARCH_HIGHBANK
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the UART on Highbank based devices.
+
+ config DEBUG_IMX1_UART
+ bool "i.MX1 Debug UART"
+ depends on SOC_IMX1
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX1.
+
+ config DEBUG_IMX23_UART
+ bool "i.MX23 Debug UART"
+ depends on SOC_IMX23
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX23.
+
+ config DEBUG_IMX25_UART
+ bool "i.MX25 Debug UART"
+ depends on SOC_IMX25
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX25.
+
+ config DEBUG_IMX21_IMX27_UART
+ bool "i.MX21 and i.MX27 Debug UART"
+ depends on SOC_IMX21 || SOC_IMX27
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX21 or i.MX27.
+
+ config DEBUG_IMX28_UART
+ bool "i.MX28 Debug UART"
+ depends on SOC_IMX28
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX28.
+
+ config DEBUG_IMX31_IMX35_UART
+ bool "i.MX31 and i.MX35 Debug UART"
+ depends on SOC_IMX31 || SOC_IMX35
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX31 or i.MX35.
+
+ config DEBUG_IMX51_UART
+ bool "i.MX51 Debug UART"
+ depends on SOC_IMX51
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX51.
+
+ config DEBUG_IMX50_IMX53_UART
+ bool "i.MX50 and i.MX53 Debug UART"
+ depends on SOC_IMX50 || SOC_IMX53
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX50 or i.MX53.
+
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q Debug UART"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
endchoice
config EARLY_PRINTK
@@ -146,16 +265,10 @@
buffer driver that will allow you to collect traces of the
kernel code.
-config DEBUG_S3C_UART
- depends on PLAT_SAMSUNG
- int "S3C UART to use for low-level debug"
- default "0"
+config ARM_KPROBES_TEST
+ tristate "Kprobes test module"
+ depends on KPROBES && MODULES
help
- Choice for UART for kernel low-level using S3C UARTS,
- should be between zero and two. The port must have been
- initialised by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ Perform tests of kprobes API and instruction set simulation.
endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5665c2a..b7c2d37 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -144,6 +144,7 @@
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
machine-$(CONFIG_ARCH_H720X) := h720x
+machine-$(CONFIG_ARCH_HIGHBANK) := highbank
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
@@ -157,10 +158,8 @@
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
-machine-$(CONFIG_ARCH_MX1) := imx
-machine-$(CONFIG_ARCH_MX2) := imx
-machine-$(CONFIG_ARCH_MX25) := imx
-machine-$(CONFIG_ARCH_MX3) := imx
+machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
+machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
@@ -170,6 +169,7 @@
machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
@@ -192,7 +192,6 @@
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
-machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index c602896..e0936a1 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -5,3 +5,12 @@
piggy.lzma
vmlinux
vmlinux.lds
+
+# borrowed libfdt files
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index a6b30b3..21f56ff3 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -26,6 +26,10 @@
OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
+# string library code (-Os is enforced to keep it much smaller)
+OBJS += string.o
+CFLAGS_string.o := -Os
+
#
# Architecture dependencies
#
@@ -89,21 +93,41 @@
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
+# Borrowed libfdt files for the ATAG compatibility mode
+
+libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
+libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h
+
+libfdt_objs := $(addsuffix .o, $(basename $(libfdt)))
+
+$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,shipped)
+
+$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
+ $(addprefix $(obj)/,$(libfdt_hdrs))
+
+ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+OBJS += $(libfdt_objs) atags_to_fdt.o
+endif
+
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- font.o font.c head.o misc.o $(OBJS)
+ lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
-extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
-ccflags-y := -fpic -fno-builtin
+ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
+# Supply kernel BSS size to the decompressor via a linker symbol.
+KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -123,7 +147,7 @@
# For __aeabi_uidivmod
lib1funcs = $(obj)/lib1funcs.o
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
$(call cmd,shipped)
# We need to prevent any GOTOFF relocs being used with references
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
new file mode 100644
index 0000000..6ce11c4
--- /dev/null
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -0,0 +1,97 @@
+#include <asm/setup.h>
+#include <libfdt.h>
+
+static int node_offset(void *fdt, const char *node_path)
+{
+ int offset = fdt_path_offset(fdt, node_path);
+ if (offset == -FDT_ERR_NOTFOUND)
+ offset = fdt_add_subnode(fdt, 0, node_path);
+ return offset;
+}
+
+static int setprop(void *fdt, const char *node_path, const char *property,
+ uint32_t *val_array, int size)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop(fdt, offset, property, val_array, size);
+}
+
+static int setprop_string(void *fdt, const char *node_path,
+ const char *property, const char *string)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_string(fdt, offset, property, string);
+}
+
+static int setprop_cell(void *fdt, const char *node_path,
+ const char *property, uint32_t val)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_cell(fdt, offset, property, val);
+}
+
+/*
+ * Convert and fold provided ATAGs into the provided FDT.
+ *
+ * REturn values:
+ * = 0 -> pretend success
+ * = 1 -> bad ATAG (may retry with another possible ATAG pointer)
+ * < 0 -> error from libfdt
+ */
+int atags_to_fdt(void *atag_list, void *fdt, int total_space)
+{
+ struct tag *atag = atag_list;
+ uint32_t mem_reg_property[2 * NR_BANKS];
+ int memcount = 0;
+ int ret;
+
+ /* make sure we've got an aligned pointer */
+ if ((u32)atag_list & 0x3)
+ return 1;
+
+ /* if we get a DTB here we're done already */
+ if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+ return 0;
+
+ /* validate the ATAG */
+ if (atag->hdr.tag != ATAG_CORE ||
+ (atag->hdr.size != tag_size(tag_core) &&
+ atag->hdr.size != 2))
+ return 1;
+
+ /* let's give it all the room it could need */
+ ret = fdt_open_into(fdt, fdt, total_space);
+ if (ret < 0)
+ return ret;
+
+ for_each_tag(atag, atag_list) {
+ if (atag->hdr.tag == ATAG_CMDLINE) {
+ setprop_string(fdt, "/chosen", "bootargs",
+ atag->u.cmdline.cmdline);
+ } else if (atag->hdr.tag == ATAG_MEM) {
+ if (memcount >= sizeof(mem_reg_property)/4)
+ continue;
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+ } else if (atag->hdr.tag == ATAG_INITRD2) {
+ uint32_t initrd_start, initrd_size;
+ initrd_start = atag->u.initrd.start;
+ initrd_size = atag->u.initrd.size;
+ setprop_cell(fdt, "/chosen", "linux,initrd-start",
+ initrd_start);
+ setprop_cell(fdt, "/chosen", "linux,initrd-end",
+ initrd_start + initrd_size);
+ }
+ }
+
+ if (memcount)
+ setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+
+ return fdt_pack(fdt);
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index e95a598..c2effc9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -216,6 +216,104 @@
mov r10, r6
#endif
+ mov r5, #0 @ init dtb size to 0
+#ifdef CONFIG_ARM_APPENDED_DTB
+/*
+ * r0 = delta
+ * r2 = BSS start
+ * r3 = BSS end
+ * r4 = final kernel address
+ * r5 = appended dtb size (still unknown)
+ * r6 = _edata
+ * r7 = architecture ID
+ * r8 = atags/device tree pointer
+ * r9 = size of decompressed image
+ * r10 = end of this image, including bss/stack/malloc space if non XIP
+ * r11 = GOT start
+ * r12 = GOT end
+ * sp = stack pointer
+ *
+ * if there are device trees (dtb) appended to zImage, advance r10 so that the
+ * dtb data will get relocated along with the kernel if necessary.
+ */
+
+ ldr lr, [r6, #0]
+#ifndef __ARMEB__
+ ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian
+#else
+ ldr r1, =0xd00dfeed
+#endif
+ cmp lr, r1
+ bne dtb_check_done @ not found
+
+#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
+ /*
+ * OK... Let's do some funky business here.
+ * If we do have a DTB appended to zImage, and we do have
+ * an ATAG list around, we want the later to be translated
+ * and folded into the former here. To be on the safe side,
+ * let's temporarily move the stack away into the malloc
+ * area. No GOT fixup has occurred yet, but none of the
+ * code we're about to call uses any global variable.
+ */
+ add sp, sp, #0x10000
+ stmfd sp!, {r0-r3, ip, lr}
+ mov r0, r8
+ mov r1, r6
+ sub r2, sp, r6
+ bl atags_to_fdt
+
+ /*
+ * If returned value is 1, there is no ATAG at the location
+ * pointed by r8. Try the typical 0x100 offset from start
+ * of RAM and hope for the best.
+ */
+ cmp r0, #1
+ sub r0, r4, #TEXT_OFFSET
+ add r0, r0, #0x100
+ mov r1, r6
+ sub r2, sp, r6
+ blne atags_to_fdt
+
+ ldmfd sp!, {r0-r3, ip, lr}
+ sub sp, sp, #0x10000
+#endif
+
+ mov r8, r6 @ use the appended device tree
+
+ /*
+ * Make sure that the DTB doesn't end up in the final
+ * kernel's .bss area. To do so, we adjust the decompressed
+ * kernel size to compensate if that .bss size is larger
+ * than the relocated code.
+ */
+ ldr r5, =_kernel_bss_size
+ adr r1, wont_overwrite
+ sub r1, r6, r1
+ subs r1, r5, r1
+ addhi r9, r9, r1
+
+ /* Get the dtb's size */
+ ldr r5, [r6, #4]
+#ifndef __ARMEB__
+ /* convert r5 (dtb size) to little endian */
+ eor r1, r5, r5, ror #16
+ bic r1, r1, #0x00ff0000
+ mov r5, r5, ror #8
+ eor r5, r5, r1, lsr #8
+#endif
+
+ /* preserve 64-bit alignment */
+ add r5, r5, #7
+ bic r5, r5, #7
+
+ /* relocate some pointers past the appended dtb */
+ add r6, r6, r5
+ add r10, r10, r5
+ add sp, sp, r5
+dtb_check_done:
+#endif
+
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
@@ -223,15 +321,14 @@
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
* r4 - 16k page directory >= r10 -> OK
- * r4 + image length <= current position (pc) -> OK
+ * r4 + image length <= address of wont_overwrite -> OK
*/
add r10, r10, #16384
cmp r4, r10
bhs wont_overwrite
add r10, r4, r9
- ARM( cmp r10, pc )
- THUMB( mov lr, pc )
- THUMB( cmp r10, lr )
+ adr r9, wont_overwrite
+ cmp r10, r9
bls wont_overwrite
/*
@@ -285,14 +382,16 @@
* r2 = BSS start
* r3 = BSS end
* r4 = kernel execution address
+ * r5 = appended dtb size (0 if not present)
* r7 = architecture ID
* r8 = atags pointer
* r11 = GOT start
* r12 = GOT end
* sp = stack pointer
*/
- teq r0, #0
+ orrs r1, r0, r5
beq not_relocated
+
add r11, r11, r0
add r12, r12, r0
@@ -307,12 +406,21 @@
/*
* Relocate all entries in the GOT table.
+ * Bump bss entries to _edata + dtb size
*/
1: ldr r1, [r11, #0] @ relocate entries in the GOT
- add r1, r1, r0 @ table. This fixes up the
- str r1, [r11], #4 @ C references.
+ add r1, r1, r0 @ This fixes up C references
+ cmp r1, r2 @ if entry >= bss_start &&
+ cmphs r3, r1 @ bss_end > entry
+ addhi r1, r1, r5 @ entry += dtb size
+ str r1, [r11], #4 @ next entry
cmp r11, r12
blo 1b
+
+ /* bump our bss pointers too */
+ add r2, r2, r5
+ add r3, r3, r5
+
#else
/*
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
new file mode 100644
index 0000000..1f4e718
--- /dev/null
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -0,0 +1,15 @@
+#ifndef _ARM_LIBFDT_ENV_H
+#define _ARM_LIBFDT_ENV_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+
+#define fdt16_to_cpu(x) be16_to_cpu(x)
+#define cpu_to_fdt16(x) cpu_to_be16(x)
+#define fdt32_to_cpu(x) be32_to_cpu(x)
+#define cpu_to_fdt32(x) cpu_to_be32(x)
+#define fdt64_to_cpu(x) be64_to_cpu(x)
+#define cpu_to_fdt64(x) cpu_to_be64(x)
+
+#endif
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 832d372..8e2a8fc 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -18,14 +18,9 @@
unsigned int __machine_arch_type;
-#define _LINUX_STRING_H_
-
#include <linux/compiler.h> /* for inline */
-#include <linux/types.h> /* for size_t */
-#include <linux/stddef.h> /* for NULL */
+#include <linux/types.h>
#include <linux/linkage.h>
-#include <asm/string.h>
-
static void putstr(const char *ptr);
extern void error(char *x);
@@ -101,41 +96,6 @@
flush();
}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i = 0;
- unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
-
- for (i = __n >> 3; i > 0; i--) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 2) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 1) {
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1)
- *d++ = *s++;
-
- return __dest;
-}
-
/*
* gzip declarations
*/
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
new file mode 100644
index 0000000..36e53ef
--- /dev/null
+++ b/arch/arm/boot/compressed/string.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/boot/compressed/string.c
+ *
+ * Small subset of simple string routines
+ */
+
+#include <linux/string.h>
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+ int i = 0;
+ unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+ for (i = __n >> 3; i > 0; i--) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 2) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 1) {
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1)
+ *d++ = *s++;
+
+ return __dest;
+}
+
+void *memmove(void *__dest, __const void *__src, size_t count)
+{
+ unsigned char *d = __dest;
+ const unsigned char *s = __src;
+
+ if (__dest == __src)
+ return __dest;
+
+ if (__dest < __src)
+ return memcpy(__dest, __src, count);
+
+ while (count--)
+ d[count] = s[count];
+ return __dest;
+}
+
+size_t strlen(const char *s)
+{
+ const char *sc = s;
+
+ while (*sc != '\0')
+ sc++;
+ return sc - s;
+}
+
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
+ int res = 0;
+
+ while (su1 < end) {
+ res = *su1++ - *su2++;
+ if (res)
+ break;
+ }
+ return res;
+}
+
+int strcmp(const char *cs, const char *ct)
+{
+ unsigned char c1, c2;
+ int res = 0;
+
+ do {
+ c1 = *cs++;
+ c2 = *ct++;
+ res = c1 - c2;
+ if (res)
+ break;
+ } while (c1);
+ return res;
+}
+
+void *memchr(const void *s, int c, size_t count)
+{
+ const unsigned char *p = s;
+
+ while (count--)
+ if ((unsigned char)c == *p++)
+ return (void *)(p - 1);
+ return NULL;
+}
+
+char *strchr(const char *s, int c)
+{
+ while (*s != (char)c)
+ if (*s++ == '\0')
+ return NULL;
+ return (char *)s;
+}
+
+#undef memset
+
+void *memset(void *s, int c, size_t count)
+{
+ char *xs = s;
+ while (count--)
+ *xs++ = c;
+ return s;
+}
+
+void __memzero(void *s, size_t count)
+{
+ memset(s, 0, count);
+}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 4e72883..4919f2a 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -51,6 +51,10 @@
_got_start = .;
.got : { *(.got) }
_got_end = .;
+
+ /* ensure the zImage file size is always a multiple of 64 bits */
+ /* (without a dummy byte, ld just ignores the empty section) */
+ .pad : { BYTE(0); . = ALIGN(8); }
_edata = .;
. = BSS_START;
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
new file mode 100644
index 0000000..aeef042
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -0,0 +1,119 @@
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G20 family SoC";
+ compatible = "atmel,at91sam9g20";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &usart4;
+ serial6 = &usart5;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fffd0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd0000 0x200>;
+ interrupts = <23>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart4: serial@fffd4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd4000 0x200>;
+ interrupts = <24>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart5: serial@fffd8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd8000 0x200>;
+ interrupts = <25>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
new file mode 100644
index 0000000..db6a452
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -0,0 +1,106 @@
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ * applies to AT91SAM9G45, AT91SAM9M10,
+ * AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G45 family SoC";
+ compatible = "atmel,at91sam9g45";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x10000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dma: dma-controller@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fff90000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff90000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fff94000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff94000 0x200>;
+ interrupts = <9>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fff98000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff98000 0x200>;
+ interrupts = <10>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
new file mode 100644
index 0000000..85b34f59
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -0,0 +1,35 @@
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g45.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9M10G45-EK";
+ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usart1: serial@fff90000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
new file mode 100644
index 0000000..aeb1a75
--- /dev/null
+++ b/arch/arm/boot/dts/highbank.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+ model = "Calxeda Highbank";
+ compatible = "calxeda,highbank";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x00000000 0xff900000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyAMA0";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer@fff10600 {
+ compatible = "arm,smp-twd";
+ reg = <0xfff10600 0x20>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ watchdog@fff10620 {
+ compatible = "arm,cortex-a9-wdt";
+ reg = <0xfff10620 0x20>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xfff12000 0x1000>;
+ interrupts = <0 70 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
+ };
+
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x10000>;
+ interrupts = <0 83 4>;
+ };
+
+ sdhci@ffe0e000 {
+ compatible = "calxeda,hb-sdhci";
+ reg = <0xffe0e000 0x1000>;
+ interrupts = <0 90 4>;
+ };
+
+ ipc@fff20000 {
+ compatible = "arm,pl320", "arm,primecell";
+ reg = <0xfff20000 0x1000>;
+ interrupts = <0 7 4>;
+ };
+
+ gpioe: gpio@fff30000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff30000 0x1000>;
+ interrupts = <0 14 4>;
+ };
+
+ gpiof: gpio@fff31000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff31000 0x1000>;
+ interrupts = <0 15 4>;
+ };
+
+ gpiog: gpio@fff32000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff32000 0x1000>;
+ interrupts = <0 16 4>;
+ };
+
+ gpioh: gpio@fff33000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff33000 0x1000>;
+ interrupts = <0 17 4>;
+ };
+
+ timer {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfff34000 0x1000>;
+ interrupts = <0 18 4>;
+ };
+
+ rtc@fff35000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0xfff35000 0x1000>;
+ interrupts = <0 19 4>;
+ };
+
+ serial@fff36000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfff36000 0x1000>;
+ interrupts = <0 20 4>;
+ };
+
+ smic@fff3a000 {
+ compatible = "ipmi-smic";
+ device_type = "ipmi";
+ reg = <0xfff3a000 0x1000>;
+ interrupts = <0 24 4>;
+ reg-size = <4>;
+ reg-spacing = <4>;
+ };
+
+ sregs@fff3c000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0xfff3c000 0x1000>;
+ };
+
+ dma@fff3d000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xfff3d000 0x1000>;
+ interrupts = <0 92 4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
new file mode 100644
index 0000000..f8766af
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+ model = "Freescale i.MX51 Babbage Board";
+ compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x90000000 0x20000000>;
+ };
+
+ soc {
+ aips@70000000 { /* aips-1 */
+ spba@70000000 {
+ esdhc@70004000 { /* ESDHC1 */
+ fsl,cd-internal;
+ fsl,wp-internal;
+ status = "okay";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ status = "okay";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+ <&gpio3 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ fsl,mc13xxx-uses-regulator;
+ };
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc-babbage";
+ reg = <0x73fa8000 0x4000>;
+ };
+
+ uart0: uart@73fbc000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ uart1: uart@73fc0000 {
+ status = "okay";
+ };
+ };
+
+ aips@80000000 { /* aips-2 */
+ sdma@83fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@83fec000 {
+ phy-mode = "mii";
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio1 21 0>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
new file mode 100644
index 0000000..327ab8e
--- /dev/null
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ tzic: tz-interrupt-controller@e0000000 {
+ compatible = "fsl,imx51-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xe0000000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@70000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x10000000>;
+ ranges;
+
+ spba@70000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x40000>;
+ ranges;
+
+ esdhc@70004000 { /* ESDHC1 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x7000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x70010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@70020000 { /* ESDHC3 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@70024000 { /* ESDHC4 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@73f84000 { /* GPIO1 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@73f88000 { /* GPIO2 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@73f8c000 { /* GPIO3 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@73f90000 { /* GPIO4 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@73f9c000 { /* WDOG2 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@73fbc000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@73fc0000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+ };
+
+ aips@80000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x10000000>;
+ ranges;
+
+ ecspi@83fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x83fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@83fb0000 {
+ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+ reg = <0x83fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@83fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
+ reg = <0x83fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@83fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
new file mode 100644
index 0000000..2ab7f80
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Automotive Reference Design Board";
+ compatible = "fsl,imx53-ard", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
+ wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-ard";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+ };
+ };
+
+ eim-cs1@f4000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eim-bus", "simple-bus";
+ reg = <0xf4000000 0x3ff0000>;
+ ranges;
+
+ lan9220@f4000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio1>;
+ interrupts = <31>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ home {
+ label = "Home";
+ gpios = <&gpio4 10 0>; /* GPIO5_10 */
+ linux,code = <102>; /* KEY_HOME */
+ gpio-key,wakeup;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio4 11 0>; /* GPIO5_11 */
+ linux,code = <158>; /* KEY_BACK */
+ gpio-key,wakeup;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio4 12 0>; /* GPIO5_12 */
+ linux,code = <362>; /* KEY_PROGRAM */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio4 13 0>; /* GPIO5_13 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio3 0 0>; /* GPIO4_0 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
new file mode 100644
index 0000000..3f3a881
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Evaluation Kit";
+ compatible = "fsl,imx53-evk", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x80000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-evk";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ pmic: mc13892@08 {
+ compatible = "fsl,mc13892", "fsl,mc13xxx";
+ reg = <0x08>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
new file mode 100644
index 0000000..ae6de6d
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start Board";
+ compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ status = "okay";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-qsb";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
new file mode 100644
index 0000000..b1c062e
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+ compatible = "fsl,imx53-smd", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
+ status = "okay";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ zigbee: mc1323@0 {
+ compatible = "fsl,mc1323";
+ spi-max-frequency = <8000000>;
+ reg = <0>;
+ };
+
+ flash: m25p32@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32", "st,m25p";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ fsl,card-wired;
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-smd";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+
+ magnetometer: mag3110@0e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ };
+
+ touchkey: mpr121@5a {
+ compatible = "fsl,mpr121";
+ reg = <0x5a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ camera: ov5642@3c {
+ compatible = "ovti,ov5642";
+ reg = <0x3c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
new file mode 100644
index 0000000..099cd84
--- /dev/null
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -0,0 +1,301 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc@50004000 { /* ESDHC1 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@50024000 { /* ESDHC4 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@53f84000 { /* GPIO1 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@53f88000 { /* GPIO2 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@53f8c000 { /* GPIO3 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@53f90000 { /* GPIO4 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@53f9c000 { /* WDOG2 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ gpio4: gpio@53fdc000 { /* GPIO5 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@53fe0000 { /* GPIO6 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@53fe4000 { /* GPIO7 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe4000 0x4000>;
+ interrupts = <107 108>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ i2c@53fec000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ status = "disabled";
+ };
+
+ uart3: uart@53ff0000 { /* UART4 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart4: uart@63f90000 { /* UART5 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ status = "disabled";
+ };
+
+ ecspi@63fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@63fb0000 {
+ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..072974e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Automotive Board";
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ soc {
+ aips-bus@02100000 { /* AIPS2 */
+ enet@02188000 {
+ phy-mode = "rgmii";
+ local-mac-address = [00 04 9F 01 1B 61];
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+ wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+ status = "okay";
+ };
+
+ usdhc@0219c000 { /* uSDHC4 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart3: uart@021f0000 { /* UART4 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 25 0>; /* GPIO3_25 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
new file mode 100644
index 0000000..7dda599
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -0,0 +1,575 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer@00a00600 {
+ compatible = "arm,smp-twd";
+ reg = <0x00a00600 0x100>;
+ interrupts = <1 13 0xf4>;
+ };
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips-bus@02000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif@02004000 {
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 0x04>;
+ };
+
+ ecspi@02008000 { /* eCSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@0200c000 { /* eCSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02010000 { /* eCSPI3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02014000 { /* eCSPI4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02018000 { /* eCSPI5 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 35 0x04>;
+ status = "disabled";
+ };
+
+ uart0: uart@02020000 { /* UART1 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ status = "disabled";
+ };
+
+ esai@02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ };
+
+ ssi@02028000 { /* SSI1 */
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 0x04>;
+ };
+
+ ssi@0202c000 { /* SSI2 */
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 0x04>;
+ };
+
+ ssi@02030000 { /* SSI3 */
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 0x04>;
+ };
+
+ asrc@02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 0x04>;
+ };
+
+ spba@0203c000 {
+ reg = <0x0203c000 0x4000>;
+ };
+ };
+
+ vpu@02040000 {
+ reg = <0x02040000 0x3c000>;
+ interrupts = <0 3 0x04 0 12 0x04>;
+ };
+
+ aipstz@0207c000 { /* AIPSTZ1 */
+ reg = <0x0207c000 0x4000>;
+ };
+
+ pwm@02080000 { /* PWM1 */
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 0x04>;
+ };
+
+ pwm@02084000 { /* PWM2 */
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 0x04>;
+ };
+
+ pwm@02088000 { /* PWM3 */
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 0x04>;
+ };
+
+ pwm@0208c000 { /* PWM4 */
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 0x04>;
+ };
+
+ flexcan@02090000 { /* CAN1 */
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 0x04>;
+ };
+
+ flexcan@02094000 { /* CAN2 */
+ reg = <0x02094000 0x4000>;
+ interrupts = <0 111 0x04>;
+ };
+
+ gpt@02098000 {
+ compatible = "fsl,imx6q-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ };
+
+ gpio0: gpio@0209c000 { /* GPIO1 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 0x04 0 67 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@020a0000 { /* GPIO2 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 0x04 0 69 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@020a4000 { /* GPIO3 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 0x04 0 71 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@020a8000 { /* GPIO4 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 0x04 0 73 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@020ac000 { /* GPIO5 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 0x04 0 75 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@020b0000 { /* GPIO6 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <0 76 0x04 0 77 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@020b4000 { /* GPIO7 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <0 78 0x04 0 79 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ kpp@020b8000 {
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 0x04>;
+ };
+
+ wdog@020bc000 { /* WDOG1 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ status = "disabled";
+ };
+
+ wdog@020c0000 { /* WDOG2 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 0x04>;
+ status = "disabled";
+ };
+
+ ccm@020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ };
+
+ anatop@020c8000 {
+ compatible = "fsl,imx6q-anatop";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ };
+
+ usbphy@020c9000 { /* USBPHY1 */
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ };
+
+ usbphy@020ca000 { /* USBPHY2 */
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 0x04>;
+ };
+
+ snvs@020cc000 {
+ reg = <0x020cc000 0x4000>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+
+ epit@020d0000 { /* EPIT1 */
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 0x04>;
+ };
+
+ epit@020d4000 { /* EPIT2 */
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 0x04>;
+ };
+
+ src@020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ };
+
+ gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04 0 90 0x04>;
+ };
+
+ iomuxc@020e0000 {
+ reg = <0x020e0000 0x4000>;
+ };
+
+ dcic@020e4000 { /* DCIC1 */
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 124 0x04>;
+ };
+
+ dcic@020e8000 { /* DCIC2 */
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 125 0x04>;
+ };
+
+ sdma@020ec000 {
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ caam@02100000 {
+ reg = <0x02100000 0x40000>;
+ interrupts = <0 105 0x04 0 106 0x04>;
+ };
+
+ aipstz@0217c000 { /* AIPSTZ2 */
+ reg = <0x0217c000 0x4000>;
+ };
+
+ enet@02188000 {
+ compatible = "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 118 0x04 0 119 0x04>;
+ status = "disabled";
+ };
+
+ mlb@0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ };
+
+ usdhc@02190000 { /* uSDHC1 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@02194000 { /* uSDHC2 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@0219c000 { /* uSDHC4 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a0000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a8000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ status = "disabled";
+ };
+
+ romcp@021ac000 {
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc@021b0000 { /* MMDC0 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ mmdc@021b4000 { /* MMDC1 */
+ reg = <0x021b4000 0x4000>;
+ };
+
+ weim@021b8000 {
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ };
+
+ ocotp@021bc000 {
+ reg = <0x021bc000 0x4000>;
+ };
+
+ ocotp@021c0000 {
+ reg = <0x021c0000 0x4000>;
+ interrupts = <0 21 0x04>;
+ };
+
+ tzasc@021d0000 { /* TZASC1 */
+ reg = <0x021d0000 0x4000>;
+ interrupts = <0 108 0x04>;
+ };
+
+ tzasc@021d4000 { /* TZASC2 */
+ reg = <0x021d4000 0x4000>;
+ interrupts = <0 109 0x04>;
+ };
+
+ audmux@021d8000 {
+ reg = <0x021d8000 0x4000>;
+ };
+
+ mipi@021dc000 { /* MIPI-CSI */
+ reg = <0x021dc000 0x4000>;
+ };
+
+ mipi@021e0000 { /* MIPI-DSI */
+ reg = <0x021e0000 0x4000>;
+ };
+
+ vdoa@021e4000 {
+ reg = <0x021e4000 0x4000>;
+ interrupts = <0 18 0x04>;
+ };
+
+ uart1: uart@021e8000 { /* UART2 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <0 27 0x04>;
+ status = "disabled";
+ };
+
+ uart2: uart@021ec000 { /* UART3 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <0 28 0x04>;
+ status = "disabled";
+ };
+
+ uart3: uart@021f0000 { /* UART4 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <0 29 0x04>;
+ status = "disabled";
+ };
+
+ uart4: uart@021f4000 { /* UART5 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <0 30 0x04>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
new file mode 100644
index 0000000..15ded0d
--- /dev/null
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8660 SURF";
+ compatible = "qcom,msm8660-surf", "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@02080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ serial@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 0000000..9486be6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
new file mode 100644
index 0000000..d202bb5
--- /dev/null
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap3430", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ iva {
+ compatible = "ti,iva2.2";
+ ti,hwmods = "iva";
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ };
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
new file mode 100644
index 0000000..c702657
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
new file mode 100644
index 0000000..066e28c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 SDP board";
+ compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
new file mode 100644
index 0000000..4c61c82
--- /dev/null
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap4430", "ti,omap4";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+ };
+
+ iva {
+ compatible = "ti,ivahd";
+ ti,hwmods = "iva";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP4 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ *
+ * MPU -+-- MPU_PRIVATE - GIC, L2
+ * |
+ * +----------------+----------+
+ * | | |
+ * + +- EMIF - DDR |
+ * | | |
+ * | + +--------+
+ * | | |
+ * | +- L4_ABE - AESS, MCBSP, TIMERs...
+ * | |
+ * +- L3_MAIN --+- L4_CORE - IPs...
+ * |
+ * +- L4_PER - IPs...
+ * |
+ * +- L4_CFG -+- L4_WKUP - IPs...
+ * | |
+ * | +- IPs...
+ * +- IPU ----+
+ * | |
+ * +- DSP ----+
+ * | |
+ * +- DSS ----+
+ *
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
new file mode 100644
index 0000000..f0a8c20
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X2";
+ compatible = "picochip,pc3x2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ clock-frequency = <400000000>;
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pclk: clock@0 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x2";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ timer2: timer@10028 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x10028 0x14>;
+ };
+
+ timer3: timer@1003c {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x1003c 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x2";
+ reg = <0xc0000000 0x10000>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
new file mode 100644
index 0000000..daa962d
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -0,0 +1,365 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X3";
+ compatible = "picochip,pc3x3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ cpu-clock = <&arm_clk>, "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clkgate: clkgate@800a0048 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x800a0048 4>;
+ compatible = "picochip,pc3x3-clk-gate";
+
+ tzprot_clk: clock@0 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <0>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ spi_clk: clock@1 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <1>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac0_clk: clock@2 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <2>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac1_clk: clock@3 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <3>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ebi_clk: clock@4 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <4>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ipsec_clk: clock@5 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <5>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ l2_clk: clock@6 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <6>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ trng_clk: clock@7 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <7>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ fuse_clk: clock@8 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <8>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ otp_clk: clock@9 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <9>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ arm_clk: clock@11 {
+ compatible = "picochip,pc3x3-pll";
+ reg = <0x800a0050 0x8>;
+ picochip,min-freq = <140000000>;
+ picochip,max-freq = <700000000>;
+ ref-clock = <&ref_clk>, "ref";
+ clock-outputs = "cpu";
+ };
+
+ pclk: clock@12 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x3";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&ipsec_clk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&l2_clk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic0>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <16>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+
+ bankd: gpio-controller@2 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <30>;
+
+ regoffset-dat = <0x5c>;
+ regoffset-set = <0x24>;
+ regoffset-dirout = <0x28>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+
+ timer2: timer@60000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x60000 0x14>;
+ };
+
+ timer3: timer@60014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x60014 0x14>;
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x3";
+ reg = <0xc0000000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+
+ otp@ffff8000 {
+ compatible = "picochip,otp-pc3x3";
+ reg = <0xffff8000 0x8000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 0000000..1297414
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X2)";
+ compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@1 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&pclk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 0000000..9e317a4
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X3)";
+ compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@10 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+
+ clkgate: clkgate@800a0048 {
+ clock@4 {
+ picochip,clk-no-disable;
+ };
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&ebi_clk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts
index 6fecc88..34ae3a6 100644
--- a/arch/arm/boot/dts/prima2-cb.dts
+++ b/arch/arm/boot/dts/prima2-cb.dts
@@ -39,9 +39,12 @@
ranges = <0x40000000 0x40000000 0x80000000>;
l2-cache-controller@80040000 {
- compatible = "arm,pl310-cache";
+ compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
reg = <0x80040000 0x1000>;
interrupts = <59>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <1 1 1>;
+ arm,filter-ranges = <0 0x40000000>;
};
intc: interrupt-controller@80020000 {
@@ -67,6 +70,11 @@
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
};
+
+ rsc-controller@88020000 {
+ compatible = "sirf,prima2-rsc";
+ reg = <0x88020000 0x1000>;
+ };
};
mem-iobg {
@@ -274,7 +282,7 @@
gpio: gpio-controller@b0120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
- compatible = "sirf,prima2-gpio";
+ compatible = "sirf,prima2-gpio-pinmux";
reg = <0xb0120000 0x10000>;
gpio-controller;
interrupt-controller;
@@ -358,7 +366,7 @@
};
rtc-iobg {
- compatible = "sirf,prima2-rtciobg", "simple-bus";
+ compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80030000 0x10000>;
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index e581866..0e225b8 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -66,5 +66,6 @@
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
};
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 64cedca..a72299b 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -25,4 +25,8 @@
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
+
+ sdhci@c8000600 {
+ support-8bit;
+ };
};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
new file mode 100644
index 0000000..9b29a62
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Tegra2 Ventana evaluation board";
+ compatible = "nvidia,ventana", "nvidia,tegra20";
+
+ chosen {
+ bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
+ };
+
+ memory {
+ reg = < 0x00000000 0x40000000 >;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ sdhci@c8000400 {
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ };
+
+ sdhci@c8000600 {
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 5727595..65d7e6a 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -77,6 +77,14 @@
gpio-controller;
};
+ pinmux: pinmux@70000000 {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = < 0x70000014 0x10 /* Tri-state registers */
+ 0x70000080 0x20 /* Mux registers */
+ 0x700000a0 0x14 /* Pull-up/down registers */
+ 0x70000868 0xa8 >; /* Pad control registers */
+ };
+
serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
new file mode 100644
index 0000000..d66e2c0
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -0,0 +1,30 @@
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+ model = "Calao USB A9G20";
+ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 4b71766..74df9ca 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,4 +1,5 @@
config ARM_GIC
+ select IRQ_DOMAIN
bool
config ARM_VIC
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index bdbb3f7..0e6ae47 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -24,10 +24,20 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
#include <linux/list.h>
#include <linux/smp.h>
+#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -71,8 +81,7 @@
static inline unsigned int gic_irq(struct irq_data *d)
{
- struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return d->irq - gic_data->irq_offset;
+ return d->hwirq;
}
/*
@@ -80,7 +89,7 @@
*/
static void gic_mask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
raw_spin_lock(&irq_controller_lock);
writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
@@ -91,7 +100,7 @@
static void gic_unmask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
raw_spin_lock(&irq_controller_lock);
if (gic_arch_extn.irq_unmask)
@@ -172,7 +181,7 @@
bool force)
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
- unsigned int shift = (d->irq % 4) * 8;
+ unsigned int shift = (gic_irq(d) % 4) * 8;
unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
u32 val, mask, bit;
@@ -223,7 +232,7 @@
if (gic_irq == 1023)
goto out;
- cascade_irq = gic_irq + chip_data->irq_offset;
+ cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq);
if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
do_bad_IRQ(cascade_irq, desc);
else
@@ -255,11 +264,12 @@
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
-static void __init gic_dist_init(struct gic_chip_data *gic,
- unsigned int irq_start)
+static void __init gic_dist_init(struct gic_chip_data *gic)
{
- unsigned int gic_irqs, irq_limit, i;
+ unsigned int i, irq;
u32 cpumask;
+ unsigned int gic_irqs = gic->gic_irqs;
+ struct irq_domain *domain = &gic->domain;
void __iomem *base = gic->dist_base;
u32 cpu = 0;
@@ -274,15 +284,6 @@
writel_relaxed(0, base + GIC_DIST_CTRL);
/*
- * Find out how many interrupts are supported.
- * The GIC only supports up to 1020 interrupt sources.
- */
- gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
- gic_irqs = (gic_irqs + 1) * 32;
- if (gic_irqs > 1020)
- gic_irqs = 1020;
-
- /*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
@@ -308,19 +309,20 @@
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
- * Limit number of interrupts registered to the platform maximum
- */
- irq_limit = gic->irq_offset + gic_irqs;
- if (WARN_ON(irq_limit > NR_IRQS))
- irq_limit = NR_IRQS;
-
- /*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < irq_limit; i++) {
- irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
- irq_set_chip_data(i, gic);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ irq_domain_for_each_irq(domain, i, irq) {
+ if (i < 32) {
+ irq_set_percpu_devid(irq);
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_percpu_devid_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
+ } else {
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_fasteoi_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ irq_set_chip_data(irq, gic);
}
writel_relaxed(1, base + GIC_DIST_CTRL);
@@ -349,23 +351,270 @@
writel_relaxed(1, base + GIC_CPU_CTRL);
}
-void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
+#ifdef CONFIG_CPU_PM
+/*
+ * Saves the GIC distributor registers during suspend or idle. Must be called
+ * with interrupts disabled but before powering down the GIC. After calling
+ * this function, no interrupts will be delivered by the GIC, and another
+ * platform-specific wakeup source must be enabled.
+ */
+static void gic_dist_save(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ void __iomem *dist_base;
+ int i;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ gic_data[gic_nr].saved_spi_conf[i] =
+ readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ gic_data[gic_nr].saved_spi_target[i] =
+ readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ gic_data[gic_nr].saved_spi_enable[i] =
+ readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+}
+
+/*
+ * Restores the GIC distributor registers during resume or when coming out of
+ * idle. Must be called before enabling interrupts. If a level interrupt
+ * that occured while the GIC was suspended is still present, it will be
+ * handled normally, but any edge interrupts that occured will not be seen by
+ * the GIC and need to be handled by the platform-specific wakeup source.
+ */
+static void gic_dist_restore(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ unsigned int i;
+ void __iomem *dist_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ writel_relaxed(0, dist_base + GIC_DIST_CTRL);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
+ dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(0xa0a0a0a0,
+ dist_base + GIC_DIST_PRI + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
+ dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
+ dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ writel_relaxed(1, dist_base + GIC_DIST_CTRL);
+}
+
+static void gic_cpu_save(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+}
+
+static void gic_cpu_restore(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
+ writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
+
+ writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+}
+
+static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
+{
+ int i;
+
+ for (i = 0; i < MAX_GIC_NR; i++) {
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ gic_cpu_save(i);
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ gic_cpu_restore(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER:
+ gic_dist_save(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ gic_dist_restore(i);
+ break;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block gic_notifier_block = {
+ .notifier_call = gic_notifier,
+};
+
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+ gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_enable);
+
+ gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_conf);
+
+ cpu_pm_register_notifier(&gic_notifier_block);
+}
+#else
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+}
+#endif
+
+#ifdef CONFIG_OF
+static int gic_irq_domain_dt_translate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize < 3)
+ return -EINVAL;
+
+ /* Get the interrupt number and add 16 to skip over SGIs */
+ *out_hwirq = intspec[1] + 16;
+
+ /* For SPIs, we need to add 16 more to get the GIC irq ID number */
+ if (!intspec[0])
+ *out_hwirq += 16;
+
+ *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+#endif
+
+const struct irq_domain_ops gic_irq_domain_ops = {
+#ifdef CONFIG_OF
+ .dt_translate = gic_irq_domain_dt_translate,
+#endif
+};
+
+void __init gic_init(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
struct gic_chip_data *gic;
+ struct irq_domain *domain;
+ int gic_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
gic = &gic_data[gic_nr];
+ domain = &gic->domain;
gic->dist_base = dist_base;
gic->cpu_base = cpu_base;
- gic->irq_offset = (irq_start - 1) & ~31;
- if (gic_nr == 0)
+ /*
+ * For primary GICs, skip over SGIs.
+ * For secondary GICs, skip over PPIs, too.
+ */
+ if (gic_nr == 0) {
gic_cpu_base_addr = cpu_base;
+ domain->hwirq_base = 16;
+ if (irq_start > 0)
+ irq_start = (irq_start & ~31) + 16;
+ } else
+ domain->hwirq_base = 32;
- gic_dist_init(gic, irq_start);
+ /*
+ * Find out how many interrupts are supported.
+ * The GIC only supports up to 1020 interrupt sources.
+ */
+ gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
+ gic->gic_irqs = gic_irqs;
+
+ domain->nr_irq = gic_irqs - domain->hwirq_base;
+ domain->irq_base = irq_alloc_descs(irq_start, 16, domain->nr_irq,
+ numa_node_id());
+ if (IS_ERR_VALUE(domain->irq_base)) {
+ WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+ irq_start);
+ domain->irq_base = irq_start;
+ }
+ domain->priv = gic;
+ domain->ops = &gic_irq_domain_ops;
+ irq_domain_add(domain);
+
+ gic_chip.flags |= gic_arch_extn.flags;
+ gic_dist_init(gic);
gic_cpu_init(gic);
+ gic_pm_init(gic);
}
void __cpuinit gic_secondary_init(unsigned int gic_nr)
@@ -375,16 +624,6 @@
gic_cpu_init(&gic_data[gic_nr]);
}
-void __cpuinit gic_enable_ppi(unsigned int irq)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- irq_set_status_flags(irq, IRQ_NOPROBE);
- gic_unmask_irq(irq_get_irq_data(irq));
- local_irq_restore(flags);
-}
-
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
@@ -405,3 +644,35 @@
writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
}
#endif
+
+#ifdef CONFIG_OF
+static int gic_cnt __initdata = 0;
+
+int __init gic_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *cpu_base;
+ void __iomem *dist_base;
+ int irq;
+ struct irq_domain *domain = &gic_data[gic_cnt].domain;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ dist_base = of_iomap(node, 0);
+ WARN(!dist_base, "unable to map gic dist registers\n");
+
+ cpu_base = of_iomap(node, 1);
+ WARN(!cpu_base, "unable to map gic cpu registers\n");
+
+ domain->of_node = of_node_get(node);
+
+ gic_init(gic_cnt, -1, dist_base, cpu_base);
+
+ if (parent) {
+ irq = irq_of_parse_and_map(node, 0);
+ gic_cascade_irq(gic_cnt, irq);
+ }
+ gic_cnt++;
+ return 0;
+}
+#endif
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 0569de6ac..61691cd 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -718,6 +718,10 @@
goto err_free;
}
+ ret = clk_prepare(sachip->clk);
+ if (ret)
+ goto err_clkput;
+
spin_lock_init(&sachip->lock);
sachip->dev = me;
@@ -733,7 +737,7 @@
sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
if (!sachip->base) {
ret = -ENOMEM;
- goto err_clkput;
+ goto err_clk_unprep;
}
/*
@@ -809,6 +813,8 @@
err_unmap:
iounmap(sachip->base);
+ err_clk_unprep:
+ clk_unprepare(sachip->clk);
err_clkput:
clk_put(sachip->clk);
err_free:
@@ -835,6 +841,7 @@
sa1111_writel(0, irqbase + SA1111_WAKEEN1);
clk_disable(sachip->clk);
+ clk_unprepare(sachip->clk);
if (sachip->irq != NO_IRQ) {
irq_set_chained_handler(sachip->irq, NULL);
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index a07b0e7..1cde34a 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -12,11 +12,11 @@
*/
#include <linux/device.h>
+#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <asm/hardware/scoop.h>
/* PCMCIA to Scoop linkage
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 41df478..2393b5b 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -41,9 +41,17 @@
return PTR_ERR(clk);
}
+ err = clk_prepare(clk);
+ if (err) {
+ pr_err("sp804: %s clock failed to prepare: %d\n", name, err);
+ clk_put(clk);
+ return err;
+ }
+
err = clk_enable(clk);
if (err) {
pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+ clk_unprepare(clk);
clk_put(clk);
return err;
}
@@ -52,6 +60,7 @@
if (rate < 0) {
pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
clk_disable(clk);
+ clk_unprepare(clk);
clk_put(clk);
}
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
new file mode 100644
index 0000000..c5876d2
--- /dev/null
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -0,0 +1,214 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G45=y
+CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_CFG80211=y
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43_PHY_N=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_ATMEL=y
+CONFIG_FB_UDL=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+CONFIG_AT_HDMAC=y
+CONFIG_DMATEST=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3b..cd40bb5 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@
CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
new file mode 100644
index 0000000..11a4192
--- /dev/null
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -0,0 +1,170 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EXPERT=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_IMX_V4_V5=y
+CONFIG_ARCH_MX1ADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MACH_MX21ADS=y
+CONFIG_MACH_MX25_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_MX27ADS=y
+CONFIG_MACH_PCM038=y
+CONFIG_MACH_CPUIMX27=y
+CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
+CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_IMX27_VISSTRIM_M10=y
+CONFIG_MACH_IMX27LITE=y
+CONFIG_MACH_PCA100=y
+CONFIG_MACH_MXT_TD60=y
+CONFIG_MACH_IMX27IPCAM=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+CONFIG_DM9000=y
+CONFIG_SMC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_MXC=y
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
+CONFIG_FB=y
+CONFIG_FB_IMX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_MX27VIS_AIC32X4=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB_HID=m
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_ULPI=y
+CONFIG_MMC=y
+CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_MC13783=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_IMXDI=y
+CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
deleted file mode 100644
index c9436d0..0000000
--- a/arch/arm/configs/mx1_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX1=y
-CONFIG_ARCH_MX1ADS=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
deleted file mode 100644
index 411f88d..0000000
--- a/arch/arm/configs/mx21_defconfig
+++ /dev/null
@@ -1,97 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
deleted file mode 100644
index 9ad4c656..0000000
--- a/arch/arm/configs/mx27_defconfig
+++ /dev/null
@@ -1,130 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX27=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_PCM038=y
-CONFIG_MACH_CPUIMX27=y
-CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
-CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_IMX27LITE=y
-CONFIG_MACH_PCA100=y
-CONFIG_MACH_MXT_TD60=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_IMX=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=m
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 7c4b30b..cb0717f 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -3,7 +3,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
@@ -13,20 +12,21 @@
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31LITE=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_QONG=y
-CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
@@ -35,7 +35,6 @@
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
CONFIG_VFP=y
-CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -52,7 +51,6 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=m
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -62,24 +60,27 @@
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
CONFIG_DNET=y
-CONFIG_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_IMX=y
+# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -89,12 +90,15 @@
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_WM8350=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9M111=y
@@ -105,9 +109,26 @@
CONFIG_VIDEO_MX3=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_FSL_USB2=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_MXC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
@@ -119,6 +140,5 @@
CONFIG_ROOT_NFS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
deleted file mode 100644
index 88c5802..0000000
--- a/arch/arm/configs/mx51_defconfig
+++ /dev/null
@@ -1,170 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_RELAY=y
-CONFIG_EXPERT=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX51=y
-CONFIG_MACH_MX51_BABBAGE=y
-CONFIG_MACH_MX51_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX51=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_TEST_SUSPEND=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_GPIO=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_EVBUG=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_SDHCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/mx5_defconfig
new file mode 100644
index 0000000..d0d8dfe
--- /dev/null
+++ b/arch/arm/configs/mx5_defconfig
@@ -0,0 +1,184 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_RELAY=y
+CONFIG_EXPERT=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MX5=y
+CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX51_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX51=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_MACH_MX51_EFIKAMX=y
+CONFIG_MACH_MX51_EFIKASB=y
+CONFIG_MACH_MX53_EVK=y
+CONFIG_MACH_MX53_SMD=y
+CONFIG_MACH_MX53_LOCO=y
+CONFIG_MACH_MX53_ARD=y
+CONFIG_MXC_PWM=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=m
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_IMX=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=m
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MMA8450=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13892=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_MXC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index db2cb7d..6ee781b 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,6 +26,7 @@
CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
+CONFIG_MACH_M28EVK=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 8845f1c..1957297 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -25,6 +25,7 @@
CONFIG_MACH_PAZ00=y
CONFIG_MACH_TRIMSLICE=y
CONFIG_MACH_WARIO=y
+CONFIG_MACH_VENTANA=y
CONFIG_TEGRA_DEBUG_UARTD=y
CONFIG_ARM_ERRATA_742230=y
CONFIG_NO_HZ=y
@@ -38,7 +39,6 @@
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_VFP=y
-CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -65,6 +65,7 @@
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_WIRELESS is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
@@ -72,34 +73,61 @@
CONFIG_ICS932S401=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
CONFIG_R8169=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_TEGRA=y
+CONFIG_SPI=y
+CONFIG_SPI_TEGRA=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_TPS6586X=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TEGRA=y
CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_IIO=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_AK8975=y
@@ -123,18 +151,15 @@
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SG=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_ECB=y
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index 6615f03..7aa3680 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -15,7 +15,12 @@
#endif
};
+struct omap_device;
+
struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+ struct omap_device *od;
+#endif
};
#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 28b7ee8..cb3b7c9 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -205,6 +205,13 @@
int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
void *, dma_addr_t, size_t);
+/*
+ * This can be called during boot to increase the size of the consistent
+ * DMA region above it's default value of 2MB. It must be called before the
+ * memory allocator is initialised, i.e. before any core_initcall.
+ */
+extern void __init init_consistent_dma_size(unsigned long size);
+
#ifdef CONFIG_DMABOUNCE
/*
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index 2f1e209..88d6181 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -25,13 +25,6 @@
movne r1, sp
adrne lr, BSYM(1b)
bne do_IPI
-
-#ifdef CONFIG_LOCAL_TIMERS
- test_for_ltirq r0, r2, r6, lr
- movne r0, sp
- adrne lr, BSYM(1b)
- bne do_local_timer
-#endif
#endif
9997:
.endm
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 166a7a3..11ad0bf 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,4 +4,23 @@
/* not all ARM platforms necessarily support this API ... */
#include <mach/gpio.h>
+#ifndef __ARM_GPIOLIB_COMPLEX
+/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
+#include <asm-generic/gpio.h>
+
+/* The trivial gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#endif
+
+/*
+ * Provide a default gpio_to_irq() which should satisfy every case.
+ * However, some platforms want to do this differently, so allow them
+ * to override it.
+ */
+#ifndef gpio_to_irq
+#define gpio_to_irq __gpio_to_irq
+#endif
+
#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 89ad180..ddf07a9 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -9,9 +9,6 @@
typedef struct {
unsigned int __softirq_pending;
-#ifdef CONFIG_LOCAL_TIMERS
- unsigned int local_timer_irqs;
-#endif
#ifdef CONFIG_SMP
unsigned int ipi_irqs[NR_IPI];
#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 434edcc..1db1143 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -102,7 +102,14 @@
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
+#else
+static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask)
+{
+ return -ENODEV;
+}
+#endif
struct l2x0_regs {
unsigned long phy_base;
@@ -121,6 +128,6 @@
extern struct l2x0_regs l2x0_saved_regs;
-#endif
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
index c115b82..74ebc80 100644
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S
@@ -22,15 +22,11 @@
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 16-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
@@ -43,7 +39,7 @@
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -62,14 +58,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
-/* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..3e91f22 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -33,19 +33,32 @@
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
+#include <linux/irqdomain.h>
+struct device_node;
+
extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
-void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+int gic_of_init(struct device_node *node, struct device_node *parent);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-void gic_enable_ppi(unsigned int);
struct gic_chip_data {
- unsigned int irq_offset;
void __iomem *dist_base;
void __iomem *cpu_base;
+#ifdef CONFIG_CPU_PM
+ u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+ u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+ u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+ struct irq_domain domain;
+#endif
+ unsigned int gic_irqs;
};
#endif
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index b69d972..9eda7dc 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -28,6 +28,8 @@
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
#define IOP3XX_N_GPIOS 8
static inline int gpio_get_value(unsigned gpio)
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index b3fea38d..43cab49 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -9,7 +9,7 @@
#ifndef __ASM_HARDWARE_IT8152_H
#define __ASM_HARDWARE_IT8152_H
-extern unsigned long it8152_base_address;
+extern void __iomem *it8152_base_address;
#define IT8152_IO_BASE (it8152_base_address + 0x03e00000)
#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000)
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index f389b27..c190bc9 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -50,6 +50,7 @@
#define ARM_DEBUG_ARCH_V6_1 2
#define ARM_DEBUG_ARCH_V7_ECP14 3
#define ARM_DEBUG_ARCH_V7_MM 4
+#define ARM_DEBUG_ARCH_V7_1 5
/* Breakpoint */
#define ARM_BREAKPOINT_EXECUTE 0
@@ -57,6 +58,7 @@
/* Watchpoints */
#define ARM_BREAKPOINT_LOAD 1
#define ARM_BREAKPOINT_STORE 2
+#define ARM_FSR_ACCESS_MASK (1 << 11)
/* Privilege Levels */
#define ARM_BREAKPOINT_PRIV 1
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 6fd955d..c6a1842 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -11,6 +11,7 @@
#define __ASM_ARM_LOCALTIMER_H
#include <linux/errno.h>
+#include <linux/interrupt.h>
struct clock_event_device;
@@ -19,31 +20,20 @@
*/
void percpu_timer_setup(void);
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
-/*
- * Called from C code
- */
-void handle_local_timer(struct pt_regs *);
-
#ifdef CONFIG_LOCAL_TIMERS
#ifdef CONFIG_HAVE_ARM_TWD
#include "smp_twd.h"
-#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop(c) twd_timer_stop((c))
#else
/*
- * Platform provides this to acknowledge a local timer IRQ.
- * Returns true if the local timer IRQ is to be processed.
+ * Stop the local timer
*/
-int local_timer_ack(void);
+void local_timer_stop(struct clock_event_device *);
#endif
@@ -58,6 +48,10 @@
{
return -ENXIO;
}
+
+static inline void local_timer_stop(struct clock_event_device *evt)
+{
+}
#endif
#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index c569998..7d19425 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -17,7 +17,7 @@
struct machine_desc {
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
- unsigned long boot_params; /* tagged list */
+ unsigned long atag_offset; /* tagged list (relative) */
const char **dt_compat; /* array of device tree
* 'compatible' strings */
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index d2fedb5..b36f365 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -29,6 +29,7 @@
#define MT_MEMORY_NONCACHED 11
#define MT_MEMORY_DTCM 12
#define MT_MEMORY_ITCM 13
+#define MT_MEMORY_SO 14
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 441fc4f..a8997d7 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -16,9 +16,12 @@
#include <linux/compiler.h>
#include <linux/const.h>
#include <linux/types.h>
-#include <mach/memory.h>
#include <asm/sizes.h>
+#ifdef CONFIG_NEED_MACH_MEMORY_H
+#include <mach/memory.h>
+#endif
+
/*
* Allow for constants defined here to be used from assembly code
* by prepending the UL suffix only with actual C code compilation.
@@ -77,16 +80,7 @@
*/
#define IOREMAP_MAX_ORDER 24
-/*
- * Size of DMA-consistent memory region. Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
#define CONSISTENT_END (0xffe00000UL)
-#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
#else /* CONFIG_MMU */
@@ -193,7 +187,11 @@
#endif
#ifndef PHYS_OFFSET
+#ifdef PLAT_PHYS_OFFSET
#define PHYS_OFFSET PLAT_PHYS_OFFSET
+#else
+#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
+#endif
#endif
/*
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 8ade184..9451dce 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -101,6 +101,9 @@
#define pgprot_writecombine(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_stronglyordered(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b7e82c4..71d99b8 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -13,7 +13,12 @@
#define __ARM_PMU_H__
#include <linux/interrupt.h>
+#include <linux/perf_event.h>
+/*
+ * Types of PMUs that can be accessed directly and require mutual
+ * exclusion between profiling tools.
+ */
enum arm_pmu_type {
ARM_PMU_DEVICE_CPU = 0,
ARM_NUM_PMU_DEVICES,
@@ -37,21 +42,17 @@
* reserve_pmu() - reserve the hardware performance counters
*
* Reserve the hardware performance counters in the system for exclusive use.
- * The platform_device for the system is returned on success, ERR_PTR()
- * encoded error on failure.
+ * Returns 0 on success or -EBUSY if the lock is already held.
*/
-extern struct platform_device *
+extern int
reserve_pmu(enum arm_pmu_type type);
/**
* release_pmu() - Relinquish control of the performance counters
*
* Release the performance counters and allow someone else to use them.
- * Callers must have disabled the counters and released IRQs before calling
- * this. The platform_device returned from reserve_pmu() must be passed as
- * a cookie.
*/
-extern int
+extern void
release_pmu(enum arm_pmu_type type);
/**
@@ -68,24 +69,78 @@
#include <linux/err.h>
-static inline struct platform_device *
+static inline int
reserve_pmu(enum arm_pmu_type type)
{
- return ERR_PTR(-ENODEV);
-}
-
-static inline int
-release_pmu(enum arm_pmu_type type)
-{
return -ENODEV;
}
-static inline int
-init_pmu(enum arm_pmu_type type)
-{
- return -ENODEV;
-}
+static inline void
+release_pmu(enum arm_pmu_type type) { }
#endif /* CONFIG_CPU_HAS_PMU */
+#ifdef CONFIG_HW_PERF_EVENTS
+
+/* The events for a given PMU register set. */
+struct pmu_hw_events {
+ /*
+ * The events that are active on the PMU for the given index.
+ */
+ struct perf_event **events;
+
+ /*
+ * A 1 bit for an index indicates that the counter is being used for
+ * an event. A 0 means that the counter can be used.
+ */
+ unsigned long *used_mask;
+
+ /*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+ raw_spinlock_t pmu_lock;
+};
+
+struct arm_pmu {
+ struct pmu pmu;
+ enum arm_perf_pmu_ids id;
+ enum arm_pmu_type type;
+ cpumask_t active_irqs;
+ const char *name;
+ irqreturn_t (*handle_irq)(int irq_num, void *dev);
+ void (*enable)(struct hw_perf_event *evt, int idx);
+ void (*disable)(struct hw_perf_event *evt, int idx);
+ int (*get_event_idx)(struct pmu_hw_events *hw_events,
+ struct hw_perf_event *hwc);
+ int (*set_event_filter)(struct hw_perf_event *evt,
+ struct perf_event_attr *attr);
+ u32 (*read_counter)(int idx);
+ void (*write_counter)(int idx, u32 val);
+ void (*start)(void);
+ void (*stop)(void);
+ void (*reset)(void *);
+ int (*map_event)(struct perf_event *event);
+ int num_events;
+ atomic_t active_events;
+ struct mutex reserve_mutex;
+ u64 max_period;
+ struct platform_device *plat_device;
+ struct pmu_hw_events *(*get_hw_events)(void);
+};
+
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+
+u64 armpmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx, int overflow);
+
+int armpmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx);
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 633d1cb..9e92cb20 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -81,6 +81,10 @@
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+/* These three are private to arch/arm/kernel/suspend.c */
+extern void cpu_do_suspend(void *);
+extern void cpu_do_resume(void *);
#else
#define cpu_proc_init processor._proc_init
#define cpu_proc_fin processor._proc_fin
@@ -89,6 +93,10 @@
#define cpu_dcache_clean_area processor.dcache_clean_area
#define cpu_set_pte_ext processor.set_pte_ext
#define cpu_do_switch_mm processor.switch_mm
+
+/* These three are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend processor.do_suspend
+#define cpu_do_resume processor.do_resume
#endif
extern void cpu_resume(void);
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 0a17b62..1e5717a 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -99,9 +99,4 @@
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *, int);
-
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index fed9981..ef9ffba9 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,7 @@
extern void __iomem *twd_base;
-int twd_timer_ack(void);
void twd_timer_setup(struct clock_event_device *);
+void twd_timer_stop(struct clock_event_device *);
#endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index b0e4e1a..1c0a551 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -1,22 +1,7 @@
#ifndef __ASM_ARM_SUSPEND_H
#define __ASM_ARM_SUSPEND_H
-#include <asm/memory.h>
-#include <asm/tlbflush.h>
-
extern void cpu_resume(void);
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
- extern int __cpu_suspend(int, long, unsigned long,
- int (*)(unsigned long));
- int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
- flush_tlb_all();
- return ret;
-}
+extern int cpu_suspend(unsigned long, int (*)(unsigned long));
#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 68036ee..16eed6a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
-obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o
+obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
@@ -43,6 +43,13 @@
else
obj-$(CONFIG_KPROBES) += kprobes-arm.o
endif
+obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o
+test-kprobes-objs := kprobes-test.o
+ifdef CONFIG_THUMB2_KERNEL
+test-kprobes-objs += kprobes-test-thumb.o
+else
+test-kprobes-objs += kprobes-test-arm.o
+endif
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 0f852d0..204e216 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
.endm
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
@@ -106,7 +106,7 @@
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
- addruart \tmp1, \tmp2
+ addruart \tmp1, \tmp2, \rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
moveq \rx, \tmp1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 239703d..566c54c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -99,7 +99,7 @@
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
add r8, r8, r4 @ PHYS_OFFSET
#else
- ldr r8, =PLAT_PHYS_OFFSET
+ ldr r8, =PHYS_OFFSET @ always constant in this case
#endif
/*
@@ -238,7 +238,7 @@
* This allows debug messages to be output
* via a serial console before paging_init.
*/
- addruart r7, r3
+ addruart r7, r3, r0
mov r3, r3, lsr #SECTION_SHIFT
mov r3, r3, lsl #PMD_ORDER
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a927ca1..814a52a9 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -45,7 +45,6 @@
/* Number of BRP/WRP registers on this CPU. */
static int core_num_brps;
-static int core_num_reserved_brps;
static int core_num_wrps;
/* Debug architecture version. */
@@ -137,10 +136,11 @@
u32 didr;
/* Do we implement the extended CPUID interface? */
- if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
- "CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n"))
+ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+ pr_warning("CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n");
return ARM_DEBUG_ARCH_V6;
+ }
ARM_DBG_READ(c0, 0, didr);
return (didr >> 16) & 0xf;
@@ -154,10 +154,21 @@
static int debug_arch_supported(void)
{
u8 arch = get_debug_arch();
- return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+
+ /* We don't support the memory-mapped interface. */
+ return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) ||
+ arch >= ARM_DEBUG_ARCH_V7_1;
}
-/* Determine number of BRP register available. */
+/* Determine number of WRP registers available. */
+static int get_num_wrp_resources(void)
+{
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ return ((didr >> 28) & 0xf) + 1;
+}
+
+/* Determine number of BRP registers available. */
static int get_num_brp_resources(void)
{
u32 didr;
@@ -176,9 +187,10 @@
static int get_num_wrps(void)
{
/*
- * FIXME: When a watchpoint fires, the only way to work out which
- * watchpoint it was is by disassembling the faulting instruction
- * and working out the address of the memory access.
+ * On debug architectures prior to 7.1, when a watchpoint fires, the
+ * only way to work out which watchpoint it was is by disassembling
+ * the faulting instruction and working out the address of the memory
+ * access.
*
* Furthermore, we can only do this if the watchpoint was precise
* since imprecise watchpoints prevent us from calculating register
@@ -192,36 +204,17 @@
* [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
* that it is set on some implementations].
*/
+ if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1)
+ return 1;
-#if 0
- int wrps;
- u32 didr;
- ARM_DBG_READ(c0, 0, didr);
- wrps = ((didr >> 28) & 0xf) + 1;
-#endif
- int wrps = 1;
-
- if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
- wrps = get_num_brp_resources() - 1;
-
- return wrps;
-}
-
-/* We reserve one breakpoint for each watchpoint. */
-static int get_num_reserved_brps(void)
-{
- if (core_has_mismatch_brps())
- return get_num_wrps();
- return 0;
+ return get_num_wrp_resources();
}
/* Determine number of usable BRPs available. */
static int get_num_brps(void)
{
int brps = get_num_brp_resources();
- if (core_has_mismatch_brps())
- brps -= get_num_reserved_brps();
- return brps;
+ return core_has_mismatch_brps() ? brps - 1 : brps;
}
/*
@@ -239,7 +232,7 @@
/* Ensure that halting mode is disabled. */
if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN,
- "halting debug mode enabled. Unable to access hardware resources.\n")) {
+ "halting debug mode enabled. Unable to access hardware resources.\n")) {
ret = -EPERM;
goto out;
}
@@ -255,6 +248,7 @@
ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
break;
case ARM_DEBUG_ARCH_V7_ECP14:
+ case ARM_DEBUG_ARCH_V7_1:
ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
break;
default:
@@ -346,24 +340,10 @@
val_base = ARM_BASE_BVR;
slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
max_slots = core_num_brps;
- if (info->step_ctrl.enabled) {
- /* Override the breakpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- }
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled) {
- /* Install into the reserved breakpoint region. */
- ctrl_base = ARM_BASE_BCR + core_num_brps;
- val_base = ARM_BASE_BVR + core_num_brps;
- /* Override the watchpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- } else {
- ctrl_base = ARM_BASE_WCR;
- val_base = ARM_BASE_WVR;
- }
+ ctrl_base = ARM_BASE_WCR;
+ val_base = ARM_BASE_WVR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -382,6 +362,17 @@
goto out;
}
+ /* Override the breakpoint data with the step data. */
+ if (info->step_ctrl.enabled) {
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) {
+ i = 0;
+ ctrl_base = ARM_BASE_BCR + core_num_brps;
+ val_base = ARM_BASE_BVR + core_num_brps;
+ }
+ }
+
/* Setup the address register. */
write_wb_reg(val_base + i, addr);
@@ -405,10 +396,7 @@
max_slots = core_num_brps;
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled)
- base = ARM_BASE_BCR + core_num_brps;
- else
- base = ARM_BASE_WCR;
+ base = ARM_BASE_WCR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -426,6 +414,13 @@
if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n"))
return;
+ /* Ensure that we disable the mismatch breakpoint. */
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE &&
+ info->step_ctrl.enabled) {
+ i = 0;
+ base = ARM_BASE_BCR + core_num_brps;
+ }
+
/* Reset the control register. */
write_wb_reg(base + i, 0);
}
@@ -632,10 +627,9 @@
* we can use the mismatch feature as a poor-man's hardware
* single-step, but this only works for per-task breakpoints.
*/
- if (WARN_ONCE(!bp->overflow_handler &&
- (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
- || !bp->hw.bp_target),
- "overflow handler required but none found\n")) {
+ if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
+ !core_has_mismatch_brps() || !bp->hw.bp_target)) {
+ pr_warning("overflow handler required but none found\n");
ret = -EINVAL;
}
out:
@@ -666,34 +660,62 @@
arch_install_hw_breakpoint(bp);
}
-static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+static void watchpoint_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
{
- int i;
+ int i, access;
+ u32 val, ctrl_reg, alignment_mask;
struct perf_event *wp, **slots;
struct arch_hw_breakpoint *info;
+ struct arch_hw_breakpoint_ctrl ctrl;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- /* Without a disassembler, we can only handle 1 watchpoint. */
- BUG_ON(core_num_wrps > 1);
-
for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
- if (wp == NULL) {
- rcu_read_unlock();
- continue;
+ if (wp == NULL)
+ goto unlock;
+
+ info = counter_arch_bp(wp);
+ /*
+ * The DFAR is an unknown value on debug architectures prior
+ * to 7.1. Since we only allow a single watchpoint on these
+ * older CPUs, we can set the trigger to the lowest possible
+ * faulting address.
+ */
+ if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
+ BUG_ON(i > 0);
+ info->trigger = wp->attr.bp_addr;
+ } else {
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+ alignment_mask = 0x7;
+ else
+ alignment_mask = 0x3;
+
+ /* Check if the watchpoint value matches. */
+ val = read_wb_reg(ARM_BASE_WVR + i);
+ if (val != (addr & ~alignment_mask))
+ goto unlock;
+
+ /* Possible match, check the byte address select. */
+ ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+ decode_ctrl_reg(ctrl_reg, &ctrl);
+ if (!((1 << (addr & alignment_mask)) & ctrl.len))
+ goto unlock;
+
+ /* Check that the access type matches. */
+ access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+ HW_BREAKPOINT_R;
+ if (!(access & hw_breakpoint_type(wp)))
+ goto unlock;
+
+ /* We have a winner. */
+ info->trigger = addr;
}
- /*
- * The DFAR is an unknown value. Since we only allow a
- * single watchpoint, we can set the trigger to the lowest
- * possible faulting address.
- */
- info = counter_arch_bp(wp);
- info->trigger = wp->attr.bp_addr;
pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
perf_bp_event(wp, regs);
@@ -705,6 +727,7 @@
if (!wp->overflow_handler)
enable_single_step(wp, instruction_pointer(regs));
+unlock:
rcu_read_unlock();
}
}
@@ -717,7 +740,7 @@
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- for (i = 0; i < core_num_reserved_brps; ++i) {
+ for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
@@ -820,7 +843,7 @@
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
- watchpoint_handler(addr, regs);
+ watchpoint_handler(addr, fsr, regs);
break;
default:
ret = 1; /* Unhandled fault. */
@@ -834,11 +857,31 @@
/*
* One-time initialisation.
*/
-static void reset_ctrl_regs(void *info)
+static cpumask_t debug_err_mask;
+
+static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
{
- int i, cpu = smp_processor_id();
+ int cpu = smp_processor_id();
+
+ pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
+ instr, cpu);
+
+ /* Set the error flag for this CPU and skip the faulting instruction. */
+ cpumask_set_cpu(cpu, &debug_err_mask);
+ instruction_pointer(regs) += 4;
+ return 0;
+}
+
+static struct undef_hook debug_reg_hook = {
+ .instr_mask = 0x0fe80f10,
+ .instr_val = 0x0e000e10,
+ .fn = debug_reg_trap,
+};
+
+static void reset_ctrl_regs(void *unused)
+{
+ int i, raw_num_brps, err = 0, cpu = smp_processor_id();
u32 dbg_power;
- cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
@@ -848,38 +891,57 @@
* Access Register to avoid taking undefined instruction exceptions
* later on.
*/
- if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+ switch (debug_arch) {
+ case ARM_DEBUG_ARCH_V6:
+ case ARM_DEBUG_ARCH_V6_1:
+ /* ARMv6 cores just need to reset the registers. */
+ goto reset_regs;
+ case ARM_DEBUG_ARCH_V7_ECP14:
/*
* Ensure sticky power-down is clear (i.e. debug logic is
* powered up).
*/
asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
- if ((dbg_power & 0x1) == 0) {
- pr_warning("CPU %d debug is powered down!\n", cpu);
- cpumask_or(cpumask, cpumask, cpumask_of(cpu));
- return;
- }
-
+ if ((dbg_power & 0x1) == 0)
+ err = -EPERM;
+ break;
+ case ARM_DEBUG_ARCH_V7_1:
/*
- * Unconditionally clear the lock by writing a value
- * other than 0xC5ACCE55 to the access register.
+ * Ensure the OS double lock is clear.
*/
- asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
- isb();
-
- /*
- * Clear any configured vector-catch events before
- * enabling monitor mode.
- */
- asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
- isb();
+ asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
+ if ((dbg_power & 0x1) == 1)
+ err = -EPERM;
+ break;
}
+ if (err) {
+ pr_warning("CPU %d debug is powered down!\n", cpu);
+ cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
+ return;
+ }
+
+ /*
+ * Unconditionally clear the lock by writing a value
+ * other than 0xC5ACCE55 to the access register.
+ */
+ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+ isb();
+
+ /*
+ * Clear any configured vector-catch events before
+ * enabling monitor mode.
+ */
+ asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+ isb();
+
+reset_regs:
if (enable_monitor_mode())
return;
/* We must also reset any reserved registers. */
- for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
+ raw_num_brps = get_num_brp_resources();
+ for (i = 0; i < raw_num_brps; ++i) {
write_wb_reg(ARM_BASE_BCR + i, 0UL);
write_wb_reg(ARM_BASE_BVR + i, 0UL);
}
@@ -895,6 +957,7 @@
{
if (action == CPU_ONLINE)
smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+
return NOTIFY_OK;
}
@@ -905,7 +968,6 @@
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
- cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
@@ -916,28 +978,31 @@
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
- core_num_reserved_brps = get_num_reserved_brps();
core_num_wrps = get_num_wrps();
- pr_info("found %d breakpoint and %d watchpoint registers.\n",
- core_num_brps + core_num_reserved_brps, core_num_wrps);
-
- if (core_num_reserved_brps)
- pr_info("%d breakpoint(s) reserved for watchpoint "
- "single-step.\n", core_num_reserved_brps);
+ /*
+ * We need to tread carefully here because DBGSWENABLE may be
+ * driven low on this core and there isn't an architected way to
+ * determine that.
+ */
+ register_undef_hook(&debug_reg_hook);
/*
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
- on_each_cpu(reset_ctrl_regs, &cpumask, 1);
- if (!cpumask_empty(&cpumask)) {
+ on_each_cpu(reset_ctrl_regs, NULL, 1);
+ unregister_undef_hook(&debug_reg_hook);
+ if (!cpumask_empty(&debug_err_mask)) {
core_num_brps = 0;
- core_num_reserved_brps = 0;
core_num_wrps = 0;
return 0;
}
+ pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n",
+ core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " :
+ "", core_num_wrps);
+
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
max_watchpoint_len = 4;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 53919b2..7cb29261 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -59,9 +59,6 @@
#ifdef CONFIG_SMP
show_ipi_list(p, prec);
#endif
-#ifdef CONFIG_LOCAL_TIMERS
- show_local_irqs(p, prec);
-#endif
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 79203ee..9fe8910 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -60,6 +60,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -971,6 +972,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
+#endif
static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
{
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
new file mode 100644
index 0000000..fc82de8
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -0,0 +1,1323 @@
+/*
+ * arch/arm/kernel/kprobes-test-arm.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "32"
+
+#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_MEM(15, 3f+1) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_arm_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)")
+
+#define _DATA_PROCESSING_DNM(op,s,val) \
+ TEST_RR( op "eq" s " r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "ne" s " r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cs" s " r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cc" s " r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "mi" s " r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "pl" s " r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vs" s " r6, r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", pc, lsl #3") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vc" s " r6, pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vc" s " r6, sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "hi" s " r8, r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\
+ TEST_RRR( op "ls" s " r9, r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\
+ TEST_RRR( op "ge" s " r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\
+ TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
+ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
+ TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
+ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
+ TEST( op s " r4, pc" ", #0x00005a00")
+
+#define DATA_PROCESSING_DNM(op,val) \
+ _DATA_PROCESSING_DNM(op,"",val) \
+ _DATA_PROCESSING_DNM(op,"s",val)
+
+#define DATA_PROCESSING_NM(op,val) \
+ TEST_RR( op "ne r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "eq r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cc r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cs r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "pl r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "mi r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vc r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R ( op "vs r",7, VAL1,", pc, lsl #3") \
+ TEST_R ( op "vs r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vs pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vs sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "ls r",9, VAL1,", r",14,val, ", lsl r",0, 3,"") \
+ TEST_RRR( op "hi r",9, VAL1,", r",14,val, ", lsr r",7, 4,"") \
+ TEST_RRR( op "lt r",11,VAL1,", r",14,val, ", asr r",7, 5,"") \
+ TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
+ TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
+ TEST_R( op "eq r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
+ TEST_R( op " r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING_DM(op,s,val) \
+ TEST_R( op "eq" s " r0, r",1, val, "") \
+ TEST_R( op "ne" s " r1, r",1, val, ", lsl #3") \
+ TEST_R( op "cs" s " r2, r",3, val, ", lsr #4") \
+ TEST_R( op "cc" s " r3, r",3, val, ", asr #5") \
+ TEST_R( op "mi" s " r4, r",5, N(val),", asr #6") \
+ TEST_R( op "pl" s " r5, r",5, val, ", ror #7") \
+ TEST_R( op "vs" s " r6, r",10,val, ", rrx") \
+ TEST( op "vs" s " r7, pc, lsl #3") \
+ TEST( op "vs" s " r7, sp, lsr #4") \
+ TEST_RR( op "vc" s " r8, r",7, val, ", lsl r",0, 3,"") \
+ TEST_RR( op "hi" s " r9, r",9, val, ", lsr r",7, 4,"") \
+ TEST_RR( op "ls" s " r10, r",9, val, ", asr r",7, 5,"") \
+ TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
+ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
+ TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
+ TEST( op "eq" s " r0, #0xf5") \
+ TEST( op "ne" s " r11, #0xf5000000") \
+ TEST( op s " r7, #0x000af000") \
+ TEST( op s " r4, #0x00005a00")
+
+#define DATA_PROCESSING_DM(op,val) \
+ _DATA_PROCESSING_DM(op,"",val) \
+ _DATA_PROCESSING_DM(op,"s",val)
+
+ DATA_PROCESSING_DNM("and",0xf00f00ff)
+ DATA_PROCESSING_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING_DNM("sub",VAL2)
+ DATA_PROCESSING_DNM("rsb",VAL2)
+ DATA_PROCESSING_DNM("add",VAL2)
+ DATA_PROCESSING_DNM("adc",VAL2)
+ DATA_PROCESSING_DNM("sbc",VAL2)
+ DATA_PROCESSING_DNM("rsc",VAL2)
+ DATA_PROCESSING_NM("tst",0xf00f00ff)
+ DATA_PROCESSING_NM("teq",0xf00f00ff)
+ DATA_PROCESSING_NM("cmp",VAL2)
+ DATA_PROCESSING_NM("cmn",VAL2)
+ DATA_PROCESSING_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING_DM("mov",VAL2)
+ DATA_PROCESSING_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING_DM("mvn",VAL2)
+
+ TEST("mov ip, sp") /* This has special case emulation code */
+
+ TEST_SUPPORTED("mov pc, #0x1000");
+ TEST_SUPPORTED("mov sp, #0x1000");
+ TEST_SUPPORTED("cmp pc, #0x1000");
+ TEST_SUPPORTED("cmp sp, #0x1000");
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED(".word 0xe15c0f1e @ cmp r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe1a0cf1e @ mov r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe08caf1e @ add r10, r12, r14, asl pc")
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED("movs pc, r1")
+ TEST_UNSUPPORTED("movs pc, r1, lsl r2")
+ TEST_UNSUPPORTED("movs pc, #0x10000")
+ TEST_UNSUPPORTED("adds pc, lr, r1")
+ TEST_UNSUPPORTED("adds pc, lr, r1, lsl r2")
+ TEST_UNSUPPORTED("adds pc, lr, #4")
+
+ /* Data-processing with SP as target */
+ TEST("add sp, sp, #16")
+ TEST("sub sp, sp, #8")
+ TEST("bic sp, sp, #0x20")
+ TEST("orr sp, sp, #0x20")
+ TEST_PR( "add sp, r",10,0,", r",11,4,"")
+ TEST_PRR("add sp, r",10,0,", r",11,4,", asl r",12,1,"")
+ TEST_P( "mov sp, r",10,0,"")
+ TEST_PR( "mov sp, r",10,0,", asl r",12,0,"")
+
+ /* Data-processing with PC as target */
+ TEST_BF( "add pc, pc, #2f-1b-8")
+ TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
+ TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
+ TEST_BF_R ("mov pc, r",0,2f,"")
+ TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
+ TEST_BB( "sub pc, pc, #1b-2b+8")
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#endif
+ TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
+ TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
+ TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
+ TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
+#endif
+ TEST_GROUP("Miscellaneous instructions")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrspl r7, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".word 0xe10ff000 @ mrs r15, cpsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, lr")
+ TEST_UNSUPPORTED("msr spsr, r0")
+
+ TEST_BF_R("bx r",0,2f,"")
+ TEST_BB_R("bx r",7,2f,"")
+ TEST_BF_R("bxeq r",14,2f,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clzeq r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+ TEST( "clz r4, sp")
+ TEST_UNSUPPORTED(".word 0x016fff10 @ clz pc, r0")
+ TEST_UNSUPPORTED(".word 0x016f0f1f @ clz r0, pc")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("bxj r0")
+#endif
+
+ TEST_BF_R("blx r",0,2f,"")
+ TEST_BB_R("blx r",7,2f,"")
+ TEST_BF_R("blxeq r",14,2f,"")
+ TEST_UNSUPPORTED(".word 0x0120003f @ blx pc")
+
+ TEST_RR( "qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qsub lr, r",9, VAL2,", r13")
+ TEST_RR( "qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdsub lr, r",9, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe101f050 @ qadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe121f050 @ qsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe141f050 @ qdadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe161f050 @ qdsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe16f2050 @ qdsub r2, r0, pc")
+ TEST_UNSUPPORTED(".word 0xe161205f @ qdsub r2, pc, r1")
+
+ TEST_UNSUPPORTED("bkpt 0xffff")
+ TEST_UNSUPPORTED("bkpt 0x0000")
+
+ TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
+
+ TEST_GROUP("Halfword multiply and multiply-accumulate")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlattge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
+
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbtle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalttle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
+
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulttge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
+
+ TEST_GROUP("Multiply and multiply-accumulate")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mulls r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "mul lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
+ TEST_RR( "muls r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mullss r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "muls lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mla lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
+ TEST_RRR( "mlas r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahis r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mlas lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_RR( "umaal r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umaalls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umaal lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
+#endif
+
+ TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
+ TEST_RR( "umulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
+ TEST_RRRR( "umlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
+ TEST_RR( "smulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
+ TEST_RRRR( "smlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
+
+ TEST_GROUP("Synchronization primitives")
+
+ /*
+ * Use hard coded constants for SWP instructions to avoid warnings
+ * about deprecated instructions.
+ */
+ TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]")
+ TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]")
+ TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
+ TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
+ TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
+ TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]")
+ TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
+
+ TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("ldrex r2, [sp]")
+ TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]")
+ TEST_UNSUPPORTED("ldrexd r2, r3, [sp]")
+ TEST_UNSUPPORTED("strexb r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexb r2, [sp]")
+ TEST_UNSUPPORTED("strexh r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexh r2, [sp]")
+#endif
+ TEST_GROUP("Extra load/store instructions")
+
+ TEST_RPR( "strh r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")
+ TEST_RPR( "streqh r",14,VAL2,", [r",13,0, ", r",12, 48,"]")
+ TEST_RPR( "strh r",1, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
+ TEST_RPR( "strh r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0ba @ strh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0bb @ strh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089a0bf @ strh r10, [r9], pc")
+
+ TEST_PR( "ldrh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrcsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrcch r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0ba @ ldrh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0bb @ ldrh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe099a0bf @ ldrh r10, [r9], pc")
+
+ TEST_RP( "strh r",0, VAL1,", [r",1, 24,", #-2]")
+ TEST_RP( "strmih r",14,VAL2,", [r",13,0, ", #2]")
+ TEST_RP( "strh r",1, VAL1,", [r",2, 24,", #4]!")
+ TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!")
+ TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48")
+ TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3b0 @ strh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3b0 @ strh pc, [r9], #48")
+
+ TEST_P( "ldrh r0, [r",0, 24,", #-2]")
+ TEST_P( "ldrvsh r14, [r",13,0, ", #2]")
+ TEST_P( "ldrh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrvch r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrh r10, [r",9, 64,"], #-48")
+ TEST( "ldrh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3b0 @ ldrh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3b0 @ ldrh pc, [r9], #48")
+
+ TEST_PR( "ldrsb r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrhisb r14, [r",13,0,", r",12, 48,"]")
+ TEST_PR( "ldrsb r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlssb r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsb r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsb r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0da @ ldrsb r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0db @ ldrsb pc, [r9], r11")
+
+ TEST_P( "ldrsb r0, [r",0, 24,", #-1]")
+ TEST_P( "ldrgesb r14, [r",13,0, ", #1]")
+ TEST_P( "ldrsb r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrltsb r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsb r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsb r10, [r",9, 64,"], #-48")
+ TEST( "ldrsb r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3d0 @ ldrsb r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3d0 @ ldrsb pc, [r9], #48")
+
+ TEST_PR( "ldrsh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrgtsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrsh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlesh r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0fa @ ldrsh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0fb @ ldrsh pc, [r9], r11")
+
+ TEST_P( "ldrsh r0, [r",0, 24,", #-1]")
+ TEST_P( "ldreqsh r14, [r",13,0 ,", #1]")
+ TEST_P( "ldrsh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrnesh r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsh r10, [r",9, 64,"], #-48")
+ TEST( "ldrsh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3f0 @ ldrsh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3f0 @ ldrsh pc, [r9], #48")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("strht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrht r1, [r2], r3")
+ TEST_UNSUPPORTED("strht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
+#endif
+
+ TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
+ TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
+ TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+ TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")
+
+ TEST_PR( "ldrd r0, [r",0, 48,", -r",2,24,"]")
+ TEST_PR( "ldrmid r8, [r",13,0, ", r",12,48,"]")
+ TEST_PR( "ldrd r4, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrpld r6, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrd r2, [r",5, 24,"], r",4,48,"")
+ TEST_PR( "ldrd r10, [r",9,48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0da @ ldrd r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0db @ ldrd pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089e0db @ ldrd lr, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089c0df @ ldrd r12, [r9], pc")
+
+ TEST_RP( "strd r",0, VAL1,", [r",1, 24,", #-8]")
+ TEST_RP( "strvsd r",8, VAL2,", [r",13,0, ", #8]")
+ TEST_RP( "strd r",4, VAL1,", [r",2, 24,", #16]!")
+ TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!")
+ TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48")
+ TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3f0 @ strd r12, [pc, #48]!")
+
+ TEST_P( "ldrd r0, [r",0, 24,", #-8]")
+ TEST_P( "ldrhid r8, [r",13,0, ", #8]")
+ TEST_P( "ldrd r4, [r",2, 24,", #16]!")
+ TEST_P( "ldrlsd r6, [r",11,24,", #-16]!")
+ TEST_P( "ldrd r2, [r",5, 24,"], #48")
+ TEST_P( "ldrd r10, [r",9,6,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3d0 @ ldrd r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3d0 @ ldrd pc, [r9], #48")
+ TEST_UNSUPPORTED(".word 0xe0c9e3d0 @ ldrd lr, [r9], #48")
+
+ TEST_GROUP("Miscellaneous")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".word 0xe300f000 @ movw pc, #0")
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".word 0xe340f000 @ movt pc, #0")
+#endif
+
+ TEST_UNSUPPORTED("msr cpsr, 0x13")
+ TEST_UNSUPPORTED("msr cpsr_f, 0xf0000000")
+ TEST_UNSUPPORTED("msr spsr, 0x13")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED("dbg #0")
+#endif
+
+ TEST_GROUP("Load/store word and unsigned byte")
+
+#define LOAD_STORE(byte) \
+ TEST_RP( "str"byte" r",0, VAL1,", [r",1, 24,", #-2]") \
+ TEST_RP( "str"byte" r",14,VAL2,", [r",13,0, ", #2]") \
+ TEST_RP( "str"byte" r",1, VAL1,", [r",2, 24,", #4]!") \
+ TEST_RP( "str"byte" r",12,VAL2,", [r",11,24,", #-4]!") \
+ TEST_RP( "str"byte" r",2, VAL1,", [r",3, 24,"], #48") \
+ TEST_RP( "str"byte" r",10,VAL2,", [r",9, 64,"], #-48") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") \
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 48,"]") \
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") \
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,48,", -r",10,24,"]!") \
+ TEST_RPR("str"byte" r",2, VAL1,", [r",3, 24,"], r",4, 48,"") \
+ TEST_RPR("str"byte" r",10,VAL2,", [r",9, 48,"], -r",11,24,"") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 24,", r",2, 32,", asl #1]")\
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 32,", asr #3]!")\
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\
+ TEST_P( "ldr"byte" r0, [r",0, 24,", #-2]") \
+ TEST_P( "ldr"byte" r14, [r",13,0, ", #2]") \
+ TEST_P( "ldr"byte" r1, [r",2, 24,", #4]!") \
+ TEST_P( "ldr"byte" r12, [r",11,24,", #-4]!") \
+ TEST_P( "ldr"byte" r2, [r",3, 24,"], #48") \
+ TEST_P( "ldr"byte" r10, [r",9, 64,"], #-48") \
+ TEST_PR( "ldr"byte" r0, [r",0, 48,", -r",2, 24,"]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 48,"]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 48,"]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,48,", -r",10,24,"]!") \
+ TEST_PR( "ldr"byte" r2, [r",3, 24,"], r",4, 48,"") \
+ TEST_PR( "ldr"byte" r10, [r",9, 48,"], -r",11,24,"") \
+ TEST_PR( "ldr"byte" r0, [r",0, 24,", r",2, 32,", asl #1]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 32,", lsr #2]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 32,", asr #3]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,24,", r",10, 4,", ror #31]!") \
+ TEST( "ldr"byte" r0, [pc, #0]") \
+ TEST_R( "ldr"byte" r12, [pc, r",14,0,"]")
+
+ LOAD_STORE("")
+ TEST_P( "str pc, [r",0,0,", #15*4]")
+ TEST_R( "str pc, [sp, r",2,15*4,"]")
+ TEST_BF( "ldr pc, [sp, #15*4]")
+ TEST_BF_R("ldr pc, [sp, r",2,15*4,"]")
+
+ TEST_P( "str sp, [r",0,0,", #13*4]")
+ TEST_R( "str sp, [sp, r",2,13*4,"]")
+ TEST_BF( "ldr sp, [sp, #13*4]")
+ TEST_BF_R("ldr sp, [sp, r",2,13*4,"]")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+#endif
+ TEST_UNSUPPORTED(".word 0xe5af6008 @ str r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7af6008 @ str r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5bf6008 @ ldr r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7bf6008 @ ldr r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe788600f @ str r6, [r8, pc]")
+ TEST_UNSUPPORTED(".word 0xe798600f @ ldr r6, [r8, pc]")
+
+ LOAD_STORE("b")
+ TEST_UNSUPPORTED(".word 0xe5f7f008 @ ldrb pc, [r7, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7f7f008 @ ldrb pc, [r7, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5ef6008 @ strb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ef6008 @ strb r6, [pc, r3]!")
+ TEST_UNSUPPORTED(".word 0xe5ff6008 @ ldrb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ff6008 @ ldrb r6, [pc, r3]!")
+
+ TEST_UNSUPPORTED("ldrt r0, [r1], #4")
+ TEST_UNSUPPORTED("ldrt r1, [r2], r3")
+ TEST_UNSUPPORTED("strt r2, [r3], #4")
+ TEST_UNSUPPORTED("strt r3, [r4], r5")
+ TEST_UNSUPPORTED("ldrbt r4, [r5], #4")
+ TEST_UNSUPPORTED("ldrbt r5, [r6], r7")
+ TEST_UNSUPPORTED("strbt r6, [r7], #4")
+ TEST_UNSUPPORTED("strbt r7, [r8], r9")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
+
+ TEST_RR( "sadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff1a @ sadd16 pc, r12, r10")
+ TEST_RR( "sasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff3a @ sasx pc, r12, r10")
+ TEST_RR( "ssax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff5a @ ssax pc, r12, r10")
+ TEST_RR( "ssub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff7a @ ssub16 pc, r12, r10")
+ TEST_RR( "sadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff9a @ sadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
+ TEST_RR( "ssub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cfffa @ ssub8 pc, r12, r10")
+
+ TEST_RR( "qadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff1a @ qadd16 pc, r12, r10")
+ TEST_RR( "qasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff3a @ qasx pc, r12, r10")
+ TEST_RR( "qsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff5a @ qsax pc, r12, r10")
+ TEST_RR( "qsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff7a @ qsub16 pc, r12, r10")
+ TEST_RR( "qadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff9a @ qadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
+ TEST_RR( "qsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cfffa @ qsub8 pc, r12, r10")
+
+ TEST_RR( "shadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff1a @ shadd16 pc, r12, r10")
+ TEST_RR( "shasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff3a @ shasx pc, r12, r10")
+ TEST_RR( "shsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff5a @ shsax pc, r12, r10")
+ TEST_RR( "shsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff7a @ shsub16 pc, r12, r10")
+ TEST_RR( "shadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff9a @ shadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
+ TEST_RR( "shsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cfffa @ shsub8 pc, r12, r10")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
+
+ TEST_RR( "uadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff1a @ uadd16 pc, r12, r10")
+ TEST_RR( "uasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff3a @ uasx pc, r12, r10")
+ TEST_RR( "usax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff5a @ usax pc, r12, r10")
+ TEST_RR( "usub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff7a @ usub16 pc, r12, r10")
+ TEST_RR( "uadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff9a @ uadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
+ TEST_RR( "usub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cfffa @ usub8 pc, r12, r10")
+
+ TEST_RR( "uqadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff1a @ uqadd16 pc, r12, r10")
+ TEST_RR( "uqasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff3a @ uqasx pc, r12, r10")
+ TEST_RR( "uqsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff5a @ uqsax pc, r12, r10")
+ TEST_RR( "uqsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff7a @ uqsub16 pc, r12, r10")
+ TEST_RR( "uqadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff9a @ uqadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
+ TEST_RR( "uqsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cfffa @ uqsub8 pc, r12, r10")
+
+ TEST_RR( "uhadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff1a @ uhadd16 pc, r12, r10")
+ TEST_RR( "uhasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff3a @ uhasx pc, r12, r10")
+ TEST_RR( "uhsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff5a @ uhsax pc, r12, r10")
+ TEST_RR( "uhsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff7a @ uhsub16 pc, r12, r10")
+ TEST_RR( "uhadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff9a @ uhadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
+ TEST_RR( "uhsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cfffa @ uhsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67feffa @ uhsub8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe67cefff @ uhsub8 r14, r12, pc")
+#endif /* __LINUX_ARM_ARCH__ >= 7 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Packing, unpacking, saturation, and reversal")
+
+ TEST_RR( "pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_UNSUPPORTED(".word 0xe68cf11a @ pkhbt pc, r12, r10, lsl #2")
+ TEST_RR( "pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+ TEST_UNSUPPORTED(".word 0xe68cf15a @ pkhtb pc, r12, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68fe15a @ pkhtb r14, pc, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68ce15f @ pkhtb r14, r12, pc, asr #2")
+ TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6b7f01c @ ssat pc, #24, r12")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6f7f01c @ usat pc, #24, r12")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe68cf47a @ sxtab16 pc,r12, r10, ror #8")
+
+ TEST_RR( "sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "sel r14, r",12,VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe68cffba @ sel pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe68fefba @ sel r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe68cefbf @ sel r14, r12, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6abff3c @ ssat16 pc, #12, r12")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6acf47a @ sxtab pc,r12, r10, ror #8")
+
+ TEST_R( "rev r0, r",0, VAL1,"")
+ TEST_R( "rev r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfff3c @ rev pc, r12")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6bcf47a @ sxtah pc,r12, r10, ror #8")
+
+ TEST_R( "rev16 r0, r",0, VAL1,"")
+ TEST_R( "rev16 r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfffbc @ rev16 pc, r12")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ccf47a @ uxtab16 pc,r12, r10, ror #8")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6ecff3c @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".word 0xe6ecef3f @ usat16 r14, #12, pc")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ecf47a @ uxtab pc,r12, r10, ror #8")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_R( "rbit r0, r",0, VAL1,"")
+ TEST_R( "rbit r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ rbit pc, r12")
+#endif
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6fff077 @ uxth pc, r7")
+ TEST_UNSUPPORTED(".word 0xe6ff807f @ uxth r8, pc")
+ TEST_UNSUPPORTED(".word 0xe6fcf47a @ uxtah pc, r12, r10, ror #8")
+ TEST_UNSUPPORTED(".word 0xe6fce47f @ uxtah r14, r12, pc, ror #8")
+
+ TEST_R( "revsh r0, r",0, VAL1,"")
+ TEST_R( "revsh r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ revsh pc, r12")
+ TEST_UNSUPPORTED(".word 0xe6ffef3f @ revsh r14, pc")
+
+ TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
+
+ TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Signed multiplies")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a1c @ smlad pc, r12, r10, r8")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a3c @ smladx pc, r12, r10, r8")
+
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa1c @ smuad pc, r12, r10")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa3c @ smuadx pc, r12, r10")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a5c @ smlsd pc, r12, r10, r8")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a7c @ smlsdx pc, r12, r10, r8")
+
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa5c @ smusd pc, r12, r10")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa7c @ smusdx pc, r12, r10")
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af819 @ smlald pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb819 @ smlald r11, pc, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74ab81f @ smlald r11, r10, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe74abf19 @ smlald r11, r10, r9, pc")
+
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af839 @ smlaldx pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb839 @ smlaldx r11, pc, r9, r8")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a1c @ smmla pc, r12, r10, r8")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a3c @ smmlar pc, r12, r10, r8")
+
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ smmul pc, r12, r10")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa3c @ smmulr pc, r12, r10")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8adc @ smmls pc, r12, r10, r8")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8afc @ smmlsr pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8aff @ smmlsr r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8ffc @ smmlsr r14, r12, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe75efafc @ smmlsr r14, r12, r10, pc")
+
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ usad8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe75efa1f @ usad8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe75eff1c @ usad8 r14, r12, pc")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_UNSUPPORTED(".word 0xe78f8a1c @ usada8 pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8a1f @ usada8 r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8f1c @ usada8 r14, r12, pc, r8")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Bit Field")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfxeq r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7aff45c @ sbfx pc, r12, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfxcs r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7eff45c @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".word 0xe7efc45f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfcvs r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".word 0xe7def01f @ bfc pc, #0, #31");
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfipl r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".word 0xe7d7f21e @ bfi pc, r14, #4, #20")
+
+ TEST_UNSUPPORTED(".word 0x07f000f0") /* Permanently UNDEFINED */
+ TEST_UNSUPPORTED(".word 0x07ffffff") /* Permanently UNDEFINED */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ TEST_GROUP("Branch, branch with link, and block data transfer")
+
+ TEST_P( "stmda r",0, 16*4,", {r0}")
+ TEST_P( "stmeqda r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmneda r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmda r",13,0, "!, {pc}")
+
+ TEST_P( "ldmda r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmcsda r",4, 15*4,", {r0-r15}")
+ TEST_BF_P("ldmccda r",7, 15*4,"!, {r8-r15}")
+ TEST_P( "ldmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmda r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmia r",0, 16*4,", {r0}")
+ TEST_P( "stmmiia r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmplia r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmia r",14,0, "!, {pc}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmvsia r",4, 0, ", {r0-r15}")
+ TEST_BF_P("ldmvcia r",7, 8*4, "!, {r8-r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0}")
+ TEST_P( "stmhidb r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmlsdb r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmdb r",13,4, "!, {pc}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmgedb r",4, 16*4,", {r0-r15}")
+ TEST_BF_P("ldmltdb r",7, 16*4,"!, {r8-r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {pc}")
+
+ TEST_P( "stmib r",0, 16*4,", {r0}")
+ TEST_P( "stmgtib r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmleib r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmib r",13,-4, "!, {pc}")
+
+ TEST_P( "ldmib r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmeqib r",4, -4,", {r0-r15}")
+ TEST_BF_P("ldmneib r",7, 7*4,"!, {r8-r15}")
+ TEST_P( "ldmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmib r",14,14*4,"!, {pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmeqdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmnedb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmccia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmcsia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia r",0,15*4,", {pc}")
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia r",13,0,", {r0-r15}")
+#endif
+ TEST_BF("b 2f")
+ TEST_BF("bl 2f")
+ TEST_BB("b 2b")
+ TEST_BB("bl 2b")
+
+ TEST_BF("beq 2f")
+ TEST_BF("bleq 2f")
+ TEST_BB("bne 2b")
+ TEST_BB("blne 2b")
+
+ TEST_BF("bgt 2f")
+ TEST_BF("blgt 2f")
+ TEST_BB("blt 2b")
+ TEST_BB("bllt 2b")
+
+ TEST_GROUP("Supervisor Call, and coprocessor instructions")
+
+ /*
+ * We can't really test these by executing them, so all
+ * we can do is check that probes are, or are not allowed.
+ * At the moment none are allowed...
+ */
+#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code)
+
+#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc) \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], {1}") \
+ \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"daf0001 @ stc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d2f0001 @ stc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"caf0001 @ stc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c2f0001 @ stc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"def0001 @ stc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d6f0001 @ stc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cef0001 @ stc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c6f0001 @ stc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dbf0001 @ ldc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d3f0001 @ ldc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cbf0001 @ ldc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c3f0001 @ ldc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dff0001 @ ldc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d7f0001 @ ldc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cff0001 @ ldc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c7f0001 @ ldc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15], {1}")
+
+#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc) \
+ \
+ TEST_COPROCESSOR( "mcrr"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mcrr"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c4f00f0 @ mcrr"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c40ff0f @ mcrr"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "mrrc"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mrrc"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c5f00f0 @ mrrc"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c50ff0f @ mrrc"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "cdp"two" 15, 15, cr15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "cdp"two" 0, 0, cr0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mcr"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mcr"two" 0, 0, r0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mrc"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
+ COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
+ TEST_UNSUPPORTED("svc 0")
+ TEST_UNSUPPORTED("svc 0xffffff")
+
+ TEST_UNSUPPORTED("svc 0")
+
+ TEST_GROUP("Unconditional instruction")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("srsda sp, 0x13")
+ TEST_UNSUPPORTED("srsdb sp, 0x13")
+ TEST_UNSUPPORTED("srsia sp, 0x13")
+ TEST_UNSUPPORTED("srsib sp, 0x13")
+ TEST_UNSUPPORTED("srsda sp!, 0x13")
+ TEST_UNSUPPORTED("srsdb sp!, 0x13")
+ TEST_UNSUPPORTED("srsia sp!, 0x13")
+ TEST_UNSUPPORTED("srsib sp!, 0x13")
+
+ TEST_UNSUPPORTED("rfeda sp")
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfeib sp")
+ TEST_UNSUPPORTED("rfeda sp!")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+ TEST_UNSUPPORTED("rfeib sp!")
+ TEST_UNSUPPORTED(".word 0xf81d0a00 @ rfeda pc")
+ TEST_UNSUPPORTED(".word 0xf91d0a00 @ rfedb pc")
+ TEST_UNSUPPORTED(".word 0xf89d0a00 @ rfeia pc")
+ TEST_UNSUPPORTED(".word 0xf99d0a00 @ rfeib pc")
+ TEST_UNSUPPORTED(".word 0xf83d0a00 @ rfeda pc!")
+ TEST_UNSUPPORTED(".word 0xf93d0a00 @ rfedb pc!")
+ TEST_UNSUPPORTED(".word 0xf8bd0a00 @ rfeia pc!")
+ TEST_UNSUPPORTED(".word 0xf9bd0a00 @ rfeib pc!")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_X( "blx __dummy_thumb_subroutine_even",
+ ".thumb \n\t"
+ ".space 4 \n\t"
+ ".type __dummy_thumb_subroutine_even, %%function \n\t"
+ "__dummy_thumb_subroutine_even: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_even")
+
+ TEST_X( "blx __dummy_thumb_subroutine_odd",
+ ".thumb \n\t"
+ ".space 2 \n\t"
+ ".type __dummy_thumb_subroutine_odd, %%function \n\t"
+ "__dummy_thumb_subroutine_odd: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_odd")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
+#if __LINUX_ARM_ARCH__ >= 6
+ COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
+#endif
+
+ TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("cps 0x13")
+ TEST_UNSUPPORTED("cpsie i")
+ TEST_UNSUPPORTED("cpsid i")
+ TEST_UNSUPPORTED("cpsie i,0x13")
+ TEST_UNSUPPORTED("cpsid i,0x13")
+ TEST_UNSUPPORTED("setend le")
+ TEST_UNSUPPORTED("setend be")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_P("pli [r",0,0b,", #16]")
+ TEST( "pli [pc, #0]")
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 5
+ TEST_P("pld [r",0,32,", #-16]")
+ TEST( "pld [pc, #0]")
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED( ".word 0xf590f000 @ pldw [r0, #0]")
+ TEST_SUPPORTED( ".word 0xf797f000 @ pldw [r7, r0]")
+ TEST_SUPPORTED( ".word 0xf798f18c @ pldw [r8, r12, lsl #3]");
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+#endif
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
new file mode 100644
index 0000000..5e726c3
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -0,0 +1,1187 @@
+/*
+ * arch/arm/kernel/kprobes-test-thumb.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "16"
+
+#define DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK; \
+ tests \
+ kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK;
+
+#define CONDITION_INSTRUCTIONS(cc_pos, tests) \
+ kprobe_test_cc_position = cc_pos; \
+ DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_cc_position = 0;
+
+#define TEST_ITBLOCK(code) \
+ kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK; \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " mov r1, #0x11 \n\t" \
+ " mov r2, #0x22 \n\t" \
+ " mov r3, #0x33 \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END \
+ kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK;
+
+#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f+1) \
+ TEST_ARG_MEM(15, 3f) \
+ TEST_ARG_END("") \
+ " nop \n\t" /* To align 1f */ \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "3: adr lr, 2f+1 \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_thumb16_test_cases(void)
+{
+ kprobe_test_flags = TEST_FLAG_NARROW_INSTR;
+
+ TEST_GROUP("Shift (immediate), add, subtract, move, and compare")
+
+ TEST_R( "lsls r7, r",0,VAL1,", #5")
+ TEST_R( "lsls r0, r",7,VAL2,", #11")
+ TEST_R( "lsrs r7, r",0,VAL1,", #5")
+ TEST_R( "lsrs r0, r",7,VAL2,", #11")
+ TEST_R( "asrs r7, r",0,VAL1,", #5")
+ TEST_R( "asrs r0, r",7,VAL2,", #11")
+ TEST_RR( "adds r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "adds r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_RR( "subs r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "subs r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_R( "adds r7, r",0,VAL1,", #5")
+ TEST_R( "adds r0, r",7,VAL2,", #2")
+ TEST_R( "subs r7, r",0,VAL1,", #5")
+ TEST_R( "subs r0, r",7,VAL2,", #2")
+ TEST( "movs.n r0, #0x5f")
+ TEST( "movs.n r7, #0xa0")
+ TEST_R( "cmp.n r",0,0x5e, ", #0x5f")
+ TEST_R( "cmp.n r",5,0x15f,", #0x5f")
+ TEST_R( "cmp.n r",7,0xa0, ", #0xa0")
+ TEST_R( "adds.n r",0,VAL1,", #0x5f")
+ TEST_R( "adds.n r",7,VAL2,", #0xa0")
+ TEST_R( "subs.n r",0,VAL1,", #0x5f")
+ TEST_R( "subs.n r",7,VAL2,", #0xa0")
+
+ TEST_GROUP("16-bit Thumb data-processing instructions")
+
+#define DATA_PROCESSING16(op,val) \
+ TEST_RR( op" r",0,VAL1,", r",7,val,"") \
+ TEST_RR( op" r",7,VAL2,", r",0,val,"")
+
+ DATA_PROCESSING16("ands",0xf00f00ff)
+ DATA_PROCESSING16("eors",0xf00f00ff)
+ DATA_PROCESSING16("lsls",11)
+ DATA_PROCESSING16("lsrs",11)
+ DATA_PROCESSING16("asrs",11)
+ DATA_PROCESSING16("adcs",VAL2)
+ DATA_PROCESSING16("sbcs",VAL2)
+ DATA_PROCESSING16("rors",11)
+ DATA_PROCESSING16("tst",0xf00f00ff)
+ TEST_R("rsbs r",0,VAL1,", #0")
+ TEST_R("rsbs r",7,VAL2,", #0")
+ DATA_PROCESSING16("cmp",0xf00f00ff)
+ DATA_PROCESSING16("cmn",0xf00f00ff)
+ DATA_PROCESSING16("orrs",0xf00f00ff)
+ DATA_PROCESSING16("muls",VAL2)
+ DATA_PROCESSING16("bics",0xf00f00ff)
+ DATA_PROCESSING16("mvns",VAL2)
+
+ TEST_GROUP("Special data instructions and branch and exchange")
+
+ TEST_RR( "add r",0, VAL1,", r",7,VAL2,"")
+ TEST_RR( "add r",3, VAL2,", r",8,VAL3,"")
+ TEST_RR( "add r",8, VAL3,", r",0,VAL1,"")
+ TEST_R( "add sp" ", r",8,-8, "")
+ TEST_R( "add r",14,VAL1,", pc")
+ TEST_BF_R("add pc" ", r",0,2f-1f-8,"")
+ TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc")
+
+ TEST_RR( "cmp r",3,VAL1,", r",8,VAL2,"")
+ TEST_RR( "cmp r",8,VAL2,", r",0,VAL1,"")
+ TEST_R( "cmp sp" ", r",8,-8, "")
+
+ TEST_R( "mov r0, r",7,VAL2,"")
+ TEST_R( "mov r3, r",8,VAL3,"")
+ TEST_R( "mov r8, r",0,VAL1,"")
+ TEST_P( "mov sp, r",8,-8, "")
+ TEST( "mov lr, pc")
+ TEST_BF_R("mov pc, r",0,2f, "")
+
+ TEST_BF_R("bx r",0, 2f+1,"")
+ TEST_BF_R("bx r",14,2f+1,"")
+ TESTCASE_START("bx pc")
+ TEST_ARG_REG(14, 99f+1)
+ TEST_ARG_END("")
+ " nop \n\t" /* To align the bx pc*/
+ "50: nop \n\t"
+ "1: bx pc \n\t"
+ " bx lr \n\t"
+ ".arm \n\t"
+ " adr lr, 2f+1 \n\t"
+ " bx lr \n\t"
+ ".thumb \n\t"
+ "2: nop \n\t"
+ TESTCASE_END
+
+ TEST_BF_R("blx r",0, 2f+1,"")
+ TEST_BB_R("blx r",14,2f+1,"")
+ TEST_UNSUPPORTED(".short 0x47f8 @ blx pc")
+
+ TEST_GROUP("Load from Literal Pool")
+
+ TEST_X( "ldr r0, 3f",
+ ".align \n\t"
+ "3: .word "__stringify(VAL1))
+ TEST_X( "ldr r7, 3f",
+ ".space 128 \n\t"
+ ".align \n\t"
+ "3: .word "__stringify(VAL2))
+
+ TEST_GROUP("16-bit Thumb Load/store instructions")
+
+ TEST_RPR("str r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("str r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strh r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strh r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strb r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strb r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrsb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldr r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldr r7, [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrh r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrsh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsh r7, [r",6, 24,", r",5, 50,"]")
+
+ TEST_RP("str r",0, VAL1,", [r",1, 24,", #120]")
+ TEST_RP("str r",7, VAL2,", [r",6, 24,", #120]")
+ TEST_P( "ldr r0, [r",1, 24,", #120]")
+ TEST_P( "ldr r7, [r",6, 24,", #120]")
+ TEST_RP("strb r",0, VAL1,", [r",1, 24,", #30]")
+ TEST_RP("strb r",7, VAL2,", [r",6, 24,", #30]")
+ TEST_P( "ldrb r0, [r",1, 24,", #30]")
+ TEST_P( "ldrb r7, [r",6, 24,", #30]")
+ TEST_RP("strh r",0, VAL1,", [r",1, 24,", #60]")
+ TEST_RP("strh r",7, VAL2,", [r",6, 24,", #60]")
+ TEST_P( "ldrh r0, [r",1, 24,", #60]")
+ TEST_P( "ldrh r7, [r",6, 24,", #60]")
+
+ TEST_R( "str r",0, VAL1,", [sp, #0]")
+ TEST_R( "str r",7, VAL2,", [sp, #160]")
+ TEST( "ldr r0, [sp, #0]")
+ TEST( "ldr r7, [sp, #160]")
+
+ TEST_RP("str r",0, VAL1,", [r",0, 24,"]")
+ TEST_P( "ldr r0, [r",0, 24,"]")
+
+ TEST_GROUP("Generate PC-/SP-relative address")
+
+ TEST("add r0, pc, #4")
+ TEST("add r7, pc, #1020")
+ TEST("add r0, sp, #4")
+ TEST("add r7, sp, #1020")
+
+ TEST_GROUP("Miscellaneous 16-bit instructions")
+
+ TEST_UNSUPPORTED( "cpsie i")
+ TEST_UNSUPPORTED( "cpsid i")
+ TEST_UNSUPPORTED( "setend le")
+ TEST_UNSUPPORTED( "setend be")
+
+ TEST("add sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */
+ TEST("sub sp, #0x7f*4")
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_BF_R( "cbnz r",0,0, ", 2f")
+ TEST_BF_R( "cbz r",2,-1,", 2f")
+ TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20)
+ TEST_BF_RX( "cbz r",7,0, ", 2f",0x40)
+)
+ TEST_R("sxth r0, r",7, HH1,"")
+ TEST_R("sxth r7, r",0, HH2,"")
+ TEST_R("sxtb r0, r",7, HH1,"")
+ TEST_R("sxtb r7, r",0, HH2,"")
+ TEST_R("uxth r0, r",7, HH1,"")
+ TEST_R("uxth r7, r",0, HH2,"")
+ TEST_R("uxtb r0, r",7, HH1,"")
+ TEST_R("uxtb r7, r",0, HH2,"")
+ TEST_R("rev r0, r",7, VAL1,"")
+ TEST_R("rev r7, r",0, VAL2,"")
+ TEST_R("rev16 r0, r",7, VAL1,"")
+ TEST_R("rev16 r7, r",0, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xba80")
+ TEST_UNSUPPORTED(".short 0xbabf")
+ TEST_R("revsh r0, r",7, VAL1,"")
+ TEST_R("revsh r7, r",0, VAL2,"")
+
+#define TEST_POPPC(code, offset) \
+ TESTCASE_START(code) \
+ TEST_ARG_PTR(13, offset) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code,0) \
+ TESTCASE_END
+
+ TEST("push {r0}")
+ TEST("push {r7}")
+ TEST("push {r14}")
+ TEST("push {r0-r7,r14}")
+ TEST("push {r0,r2,r4,r6,r14}")
+ TEST("push {r1,r3,r5,r7}")
+ TEST("pop {r0}")
+ TEST("pop {r7}")
+ TEST("pop {r0,r2,r4,r6}")
+ TEST_POPPC("pop {pc}",15*4)
+ TEST_POPPC("pop {r0-r7,pc}",7*4)
+ TEST_POPPC("pop {r1,r3,r5,r7,pc}",11*4)
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {pc} @ ",13,15*4,"")
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {r0-r7,pc} @ ",13,7*4,"")
+
+ TEST_UNSUPPORTED("bkpt.n 0")
+ TEST_UNSUPPORTED("bkpt.n 255")
+
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
+ TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
+
+#define TEST_IT(code, code2) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " "code2" \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_IT("it eq","moveq r0,#0")
+ TEST_IT("it vc","movvc r0,#0")
+ TEST_IT("it le","movle r0,#0")
+ TEST_IT("ite eq","moveq r0,#0\n\t movne r1,#1")
+ TEST_IT("itet vc","movvc r0,#0\n\t movvs r1,#1\n\t movvc r2,#2")
+ TEST_IT("itete le","movle r0,#0\n\t movgt r1,#1\n\t movle r2,#2\n\t movgt r3,#3")
+ TEST_IT("itttt le","movle r0,#0\n\t movle r1,#1\n\t movle r2,#2\n\t movle r3,#3")
+ TEST_IT("iteee le","movle r0,#0\n\t movgt r1,#1\n\t movgt r2,#2\n\t movgt r3,#3")
+)
+
+ TEST_GROUP("Load and store multiple")
+
+ TEST_P("ldmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("ldmia r",7, 16*4,"!, {r0-r6}")
+ TEST_P("stmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("stmia r",0, 16*4,"!, {r0-r7}")
+
+ TEST_GROUP("Conditional branch and Supervisor Call instructions")
+
+CONDITION_INSTRUCTIONS(8,
+ TEST_BF("beq 2f")
+ TEST_BB("bne 2b")
+ TEST_BF("bgt 2f")
+ TEST_BB("blt 2b")
+)
+ TEST_UNSUPPORTED(".short 0xde00")
+ TEST_UNSUPPORTED(".short 0xdeff")
+ TEST_UNSUPPORTED("svc #0x00")
+ TEST_UNSUPPORTED("svc #0xff")
+
+ TEST_GROUP("Unconditional branch")
+
+ TEST_BF( "b 2f")
+ TEST_BB( "b 2b")
+ TEST_BF_X("b 2f", 0x400)
+ TEST_BB_X("b 2b", 0x400)
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("subs.n r0, r0")
+
+ verbose("\n");
+}
+
+
+void kprobe_thumb32_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Load/store multiple")
+
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+
+ TEST_P( "stmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmia r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmia r",7, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmia r",4, 0, ", {r0-r12,r14}")
+ TEST_BF_P("ldmia r",5, 8*4, "!, {r6-r12,r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,14*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmdb r",5, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_BF_P("ldmdb r",5, 16*4,"!, {r6-r12,r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmdb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",0,14*4,", {r12,pc}")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",13,2*4,", {r0-r12,pc}")
+
+ TEST_UNSUPPORTED(".short 0xe88f,0x0101 @ stmia pc, {r0,r8}")
+ TEST_UNSUPPORTED(".short 0xe92f,0x5f00 @ stmdb pc!, {r8-r12,r14}")
+ TEST_UNSUPPORTED(".short 0xe8bd,0xc000 @ ldmia r13!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0xc000 @ ldmdb r14!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x3f00 @ stmia r7!, {r8-r12,sp}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x9f00 @ stmia r7!, {r8-r12,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0x2010 @ ldmdb r14!, {r4,sp}")
+
+ TEST_GROUP("Load/store double or exclusive, table branch")
+
+ TEST_P( "ldrd r0, r1, [r",1, 24,", #-16]")
+ TEST( "ldrd r12, r14, [sp, #16]")
+ TEST_P( "ldrd r1, r0, [r",7, 24,", #-16]!")
+ TEST( "ldrd r14, r12, [sp, #16]!")
+ TEST_P( "ldrd r1, r0, [r",7, 24,"], #16")
+ TEST( "ldrd r7, r8, [sp], #-16")
+
+ TEST_X( "ldrd r12, r14, 3f",
+ ".align 3 \n\t"
+ "3: .word "__stringify(VAL1)" \n\t"
+ " .word "__stringify(VAL2))
+
+ TEST_UNSUPPORTED(".short 0xe9ff,0xec04 @ ldrd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ff,0xec04 @ ldrd r14, r12, [pc], #16")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xd800 @ ldrd sp, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xf800 @ ldrd pc, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7d00 @ ldrd r7, sp, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7f00 @ ldrd r7, pc, [r4]")
+
+ TEST_RRP("strd r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
+ TEST_RR( "strd r",12,VAL2,", r",14,VAL1,", [sp, #16]")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!")
+ TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
+ TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16")
+ TEST_UNSUPPORTED(".short 0xe9ef,0xec04 @ strd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ef,0xec04 @ strd r14, r12, [pc], #16")
+
+ TEST_RX("tbb [pc, r",0, (9f-(1f+4)),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbb [pc, r",4, (9f-(1f+4)+1),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbb [r",1,9f,", r",2,0,"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbh [r",1,9f, ", r",14,1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01f @ tbh [r1, pc]")
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01d @ tbh [r1, sp]")
+ TEST_UNSUPPORTED(".short 0xe8dd,0xf012 @ tbh [sp, r2]")
+
+ TEST_UNSUPPORTED("strexb r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexh r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexd r0, r1, [r2]")
+ TEST_UNSUPPORTED("ldrexb r0, [r1]")
+ TEST_UNSUPPORTED("ldrexh r0, [r1]")
+ TEST_UNSUPPORTED("ldrexd r0, [r1]")
+
+ TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
+
+#define _DATA_PROCESSING32_DNM(op,s,val) \
+ TEST_RR(op s".w r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op s" r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op s" r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op s" r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op s" r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op s" r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op s" r8, r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op s" r0, r",11,VAL1,", #0x00010001") \
+ TEST_R( op s" r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s" r7, r",8, VAL2,", #0x000af000")
+
+#define DATA_PROCESSING32_DNM(op,val) \
+ _DATA_PROCESSING32_DNM(op,"",val) \
+ _DATA_PROCESSING32_DNM(op,"s",val)
+
+#define DATA_PROCESSING32_NM(op,val) \
+ TEST_RR(op".w r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op" r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op" r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op" r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op" r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op" r",11,VAL1,", #0x00010001") \
+ TEST_R( op" r",0, VAL1,", #0xf5000000") \
+ TEST_R( op" r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING32_DM(op,s,val) \
+ TEST_R( op s".w r0, r",14, val, "") \
+ TEST_R( op s" r1, r",12, val, ", lsl #3") \
+ TEST_R( op s" r2, r",11, val, ", lsr #4") \
+ TEST_R( op s" r3, r",10, val, ", asr #5") \
+ TEST_R( op s" r4, r",9, N(val),", asr #6") \
+ TEST_R( op s" r5, r",8, val, ", ror #7") \
+ TEST_R( op s" r8, r",7,val, ", rrx") \
+ TEST( op s" r0, #0x00010001") \
+ TEST( op s" r11, #0xf5000000") \
+ TEST( op s" r7, #0x000af000") \
+ TEST( op s" r4, #0x00005a00")
+
+#define DATA_PROCESSING32_DM(op,val) \
+ _DATA_PROCESSING32_DM(op,"",val) \
+ _DATA_PROCESSING32_DM(op,"s",val)
+
+ DATA_PROCESSING32_DNM("and",0xf00f00ff)
+ DATA_PROCESSING32_NM("tst",0xf00f00ff)
+ DATA_PROCESSING32_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING32_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING32_DM("mov",VAL2)
+ DATA_PROCESSING32_DNM("orn",0xf00f00ff)
+ DATA_PROCESSING32_DM("mvn",VAL2)
+ DATA_PROCESSING32_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING32_NM("teq",0xf00f00ff)
+ DATA_PROCESSING32_DNM("add",VAL2)
+ DATA_PROCESSING32_NM("cmn",VAL2)
+ DATA_PROCESSING32_DNM("adc",VAL2)
+ DATA_PROCESSING32_DNM("sbc",VAL2)
+ DATA_PROCESSING32_DNM("sub",VAL2)
+ DATA_PROCESSING32_NM("cmp",VAL2)
+ DATA_PROCESSING32_DNM("rsb",VAL2)
+
+ TEST_RR("pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_RR("pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0d @ tst.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0f @ tst.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea1d,0x0f07 @ tst.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea1f,0x0f07 @ tst.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf01d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf01f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0d @ teq.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0f @ teq.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea9d,0x0f07 @ teq.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea9f,0x0f07 @ teq.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf09d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf09f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0d @ cmn.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0f @ cmn.w r7, pc")
+ TEST_P("cmn.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xeb1f,0x0f07 @ cmn.w pc, r7")
+ TEST( "cmn sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf11f,0x1f08 @ cmn pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0d @ cmp.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0f @ cmp.w r7, pc")
+ TEST_P("cmp.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xebbf,0x0f07 @ cmp.w pc, r7")
+ TEST( "cmp sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf1bf,0x1f08 @ cmp pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea5f,0x070d @ movs.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea5f,0x070f @ movs.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea5f,0x0d07 @ movs.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea4f,0x0f07 @ mov.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1d08 @ mov sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1f08 @ mov pc, #0x00080008")
+
+ TEST_R("add.w r0, sp, r",1, 4,"")
+ TEST_R("adds r0, sp, r",1, 4,", asl #3")
+ TEST_R("add r0, sp, r",1, 4,", asl #4")
+ TEST_R("add r0, sp, r",1, 16,", ror #1")
+ TEST_R("add.w sp, sp, r",1, 4,"")
+ TEST_R("add sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x1d01 @ add sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d71 @ add sp, sp, r1, ror #1")
+ TEST( "add.w r0, sp, #24")
+ TEST( "add.w sp, sp, #24")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0f01 @ add pc, sp, r1")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000f @ add r0, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000d @ add r0, sp, sp")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f @ add sp, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d @ add sp, sp, sp")
+
+ TEST_R("sub.w r0, sp, r",1, 4,"")
+ TEST_R("subs r0, sp, r",1, 4,", asl #3")
+ TEST_R("sub r0, sp, r",1, 4,", asl #4")
+ TEST_R("sub r0, sp, r",1, 16,", ror #1")
+ TEST_R("sub.w sp, sp, r",1, 4,"")
+ TEST_R("sub sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xebad,0x1d01 @ sub sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xebad,0x0d71 @ sub sp, sp, r1, ror #1")
+ TEST_UNSUPPORTED(".short 0xebad,0x0f01 @ sub pc, sp, r1")
+ TEST( "sub.w r0, sp, #24")
+ TEST( "sub.w sp, sp, #24")
+
+ TEST_UNSUPPORTED(".short 0xea02,0x010f @ and r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xea0f,0x0103 @ and r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0f03 @ and pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x010d @ and r1, r2, sp")
+ TEST_UNSUPPORTED(".short 0xea0d,0x0103 @ and r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0d03 @ and sp, r2, r3")
+ TEST_UNSUPPORTED(".short 0xf00d,0x1108 @ and r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf00f,0x1108 @ and r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1d08 @ and sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1f08 @ and pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb02,0x010f @ add r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xeb0f,0x0103 @ add r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0f03 @ add pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x010d @ add r1, r2, sp")
+ TEST_SUPPORTED( ".short 0xeb0d,0x0103 @ add r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0d03 @ add sp, r2, r3")
+ TEST_SUPPORTED( ".short 0xf10d,0x1108 @ add r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10d,0x1f08 @ add pc, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10f,0x1108 @ add r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1d08 @ add sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1f08 @ add pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb20,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb80,0x0000")
+ TEST_UNSUPPORTED(".short 0xebe0,0x0000")
+
+ TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf120,0x0000")
+ TEST_UNSUPPORTED(".short 0xf180,0x0000")
+ TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xec00,0x0000")
+ TEST_UNSUPPORTED(".short 0xeff0,0x0000")
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xfff0,0x0000")
+
+ TEST_GROUP("Data-processing (plain binary immediate)")
+
+ TEST_R("addw r0, r",1, VAL1,", #0x123")
+ TEST( "addw r14, sp, #0xf5a")
+ TEST( "addw sp, sp, #0x20")
+ TEST( "addw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1f20 @ addw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20d,0x1f20 @ addw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1d20 @ addw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf200,0x1d20 @ addw sp, r0, #0x120")
+
+ TEST_R("subw r0, r",1, VAL1,", #0x123")
+ TEST( "subw r14, sp, #0xf5a")
+ TEST( "subw sp, sp, #0x20")
+ TEST( "subw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1f20 @ subw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2ad,0x1f20 @ subw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1d20 @ subw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2a0,0x1d20 @ subw sp, r0, #0x120")
+
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".short 0xf240,0x0d00 @ movw sp, #0")
+ TEST_UNSUPPORTED(".short 0xf240,0x0f00 @ movw pc, #0")
+
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0d00 @ movt sp, #0")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0f00 @ movt pc, #0")
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0d17 @ ssat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0f17 @ ssat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30d,0x0c17 @ ssat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf30f,0x0c17 @ ssat r12, #24, pc")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0d17 @ usat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0f17 @ usat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38d,0x0c17 @ usat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf38f,0x0c17 @ usat r12, #24, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0d0b @ ssat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0f0b @ ssat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32d,0x0c0b @ ssat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf32f,0x0c0b @ ssat16 r12, #12, pc")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b @ usat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b @ usat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf3af,0x0c0b @ usat16 r12, #12, pc")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2d0f @ sbfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2f0f @ sbfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34d,0x2c0f @ sbfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34f,0x2c0f @ sbfx r12, pc, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f @ ubfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f @ ubfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfc r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0d1e @ bfc sp, #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0f1e @ bfc pc, #0, #31")
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfi r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1d17 @ bfi sp, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1f17 @ bfi pc, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36d,0x1e17 @ bfi r14, sp, #4, #20")
+
+ TEST_GROUP("Branches and miscellaneous control")
+
+CONDITION_INSTRUCTIONS(22,
+ TEST_BF("beq.w 2f")
+ TEST_BB("bne.w 2b")
+ TEST_BF("bgt.w 2f")
+ TEST_BB("blt.w 2b")
+ TEST_BF_X("bpl.w 2f",0x1000)
+)
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, r1")
+ TEST_UNSUPPORTED("msr spsr, r2")
+
+ TEST_UNSUPPORTED("cpsie.w i")
+ TEST_UNSUPPORTED("cpsid.w i")
+ TEST_UNSUPPORTED("cps 0x13")
+
+ TEST_SUPPORTED("yield.w")
+ TEST("sev.w")
+ TEST("nop.w")
+ TEST("wfi.w")
+ TEST_SUPPORTED("wfe.w")
+ TEST_UNSUPPORTED("dbg.w #0")
+
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+
+ TEST_UNSUPPORTED("bxj r0")
+
+ TEST_UNSUPPORTED("subs pc, lr, #4")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8d00 @ mrs sp, spsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8f00 @ mrs pc, spsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
+
+ TEST_BF( "b.w 2f")
+ TEST_BB( "b.w 2b")
+ TEST_BF_X("b.w 2f", 0x1000)
+
+ TEST_BF( "bl.w 2f")
+ TEST_BB( "bl.w 2b")
+ TEST_BB_X("bl.w 2b", 0x1000)
+
+ TEST_X( "blx __dummy_arm_subroutine",
+ ".arm \n\t"
+ ".align \n\t"
+ ".type __dummy_arm_subroutine, %%function \n\t"
+ "__dummy_arm_subroutine: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".thumb \n\t"
+ )
+ TEST( "blx __dummy_arm_subroutine")
+
+ TEST_GROUP("Store single data item")
+
+#define SINGLE_STORE(size) \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,-1024,", #1024]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, -1024,", #1080]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #-120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #-128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, ", #120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, ", #128]!") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]!") \
+ TEST_RPR("str"size".w r",0, VAL1,", [r",1, 0,", r",2, 4,"]") \
+ TEST_RPR("str"size" r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_R( "str"size".w r",7, VAL1,", [sp, #24]") \
+ TEST_RP( "str"size".w r",0, VAL2,", [r",0,0, "]") \
+ TEST_UNSUPPORTED("str"size"t r0, [r1, #4]")
+
+ SINGLE_STORE("b")
+ SINGLE_STORE("h")
+ SINGLE_STORE("")
+
+ TEST("str sp, [sp]")
+ TEST_UNSUPPORTED(".short 0xf8cf,0xe000 @ str r14, [pc]")
+ TEST_UNSUPPORTED(".short 0xf8ce,0xf000 @ str pc, [r14]")
+
+ TEST_GROUP("Advanced SIMD element or structure load/store instructions")
+
+ TEST_UNSUPPORTED(".short 0xf900,0x0000")
+ TEST_UNSUPPORTED(".short 0xf92f,0xffff")
+ TEST_UNSUPPORTED(".short 0xf980,0x0000")
+ TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
+
+ TEST_GROUP("Load single data item and memory hints")
+
+#define SINGLE_LOAD(size) \
+ TEST_P( "ldr"size" r0, [r",11,-1024, ", #1024]") \
+ TEST_P( "ldr"size" r14, [r",1, -1024,", #1080]") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #120") \
+ TEST_P( "ldr"size" r14, [r",1, 24, "], #128") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #-120") \
+ TEST_P( "ldr"size" r14, [r",1,24, "], #-128") \
+ TEST_P( "ldr"size" r0, [r",11,24, ", #120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 24, ", #128]!") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]!") \
+ TEST_PR("ldr"size".w r0, [r",1, 0,", r",2, 4,"]") \
+ TEST_PR("ldr"size" r14, [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_X( "ldr"size".w r0, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL1)) \
+ TEST_X( "ldr"size".w r14, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL2)) \
+ TEST( "ldr"size".w r7, 3b") \
+ TEST( "ldr"size".w r7, [sp, #24]") \
+ TEST_P( "ldr"size".w r0, [r",0,0, "]") \
+ TEST_UNSUPPORTED("ldr"size"t r0, [r1, #4]")
+
+ SINGLE_LOAD("b")
+ SINGLE_LOAD("sb")
+ SINGLE_LOAD("h")
+ SINGLE_LOAD("sh")
+ SINGLE_LOAD("")
+
+ TEST_BF_P("ldr pc, [r",14, 15*4,"]")
+ TEST_P( "ldr sp, [r",14, 13*4,"]")
+ TEST_BF_R("ldr pc, [sp, r",14, 15*4,"]")
+ TEST_R( "ldr sp, [sp, r",14, 13*4,"]")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+ TEST_SUPPORTED("ldr sp, 99f")
+ TEST_SUPPORTED("ldr pc, 99f")
+
+ TEST_UNSUPPORTED(".short 0xf854,0x700d @ ldr r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf854,0x700f @ ldr r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700d @ ldrb r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700f @ ldrb r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf89f,0xd004 @ ldrb sp, 99f")
+ TEST_UNSUPPORTED(".short 0xf814,0xd008 @ ldrb sp, [r4, r8]")
+ TEST_UNSUPPORTED(".short 0xf894,0xd000 @ ldrb sp, [r4]")
+
+ TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
+
+ TEST( "pli [pc, #4]")
+ TEST( "pli [pc, #-4]")
+ TEST( "pld [pc, #4]")
+ TEST( "pld [pc, #-4]")
+
+ TEST_P( "pld [r",0,-1024,", #1024]")
+ TEST( ".short 0xf8b0,0xf400 @ pldw [r0, #1024]")
+ TEST_P( "pli [r",4, 0b,", #1024]")
+ TEST_P( "pld [r",7, 120,", #-120]")
+ TEST( ".short 0xf837,0xfc78 @ pldw [r7, #-120]")
+ TEST_P( "pli [r",11,120,", #-120]")
+ TEST( "pld [sp, #0]")
+
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", r",12,16,", lsl #3]")
+ TEST_SUPPORTED(".short 0xf837,0xf000 @ pldw [r7, r0]")
+ TEST_SUPPORTED(".short 0xf838,0xf03c @ pldw [r8, r12, lsl #3]");
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", r",12,16,", lsl #3]")
+ TEST_R( "pld [sp, r",1, 16,"]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00d @pld [r7, sp]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00f @pld [r7, pc]")
+
+ TEST_GROUP("Data-processing (register)")
+
+#define SHIFTS32(op) \
+ TEST_RR(op" r0, r",1, VAL1,", r",2, 3, "") \
+ TEST_RR(op" r14, r",12,VAL2,", r",11,10,"")
+
+ SHIFTS32("lsl")
+ SHIFTS32("lsls")
+ SHIFTS32("lsr")
+ SHIFTS32("lsrs")
+ SHIFTS32("asr")
+ SHIFTS32("asrs")
+ SHIFTS32("ror")
+ SHIFTS32("rors")
+
+ TEST_UNSUPPORTED(".short 0xfa01,0xff02 @ lsl pc, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xfd02 @ lsl sp, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf002 @ lsl r0, pc, r2")
+ TEST_UNSUPPORTED(".short 0xfa0d,0xf002 @ lsl r0, sp, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00f @ lsl r0, r1, pc")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00d @ lsl r0, r1, sp")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa0f,0xff87 @ sxth pc, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xfd87 @ sxth sp, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88f @ sxth r8, pc");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88d @ sxth r8, sp");
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
+ TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
+
+#define PARALLEL_ADD_SUB(op) \
+ TEST_RR( op"add16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"asx r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"asx r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sax r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sax r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"add8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add8 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub8 r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ PARALLEL_ADD_SUB("s")
+ PARALLEL_ADD_SUB("q")
+ PARALLEL_ADD_SUB("sh")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ PARALLEL_ADD_SUB("u")
+ PARALLEL_ADD_SUB("uq")
+ PARALLEL_ADD_SUB("uh")
+
+ TEST_GROUP("Miscellaneous operations")
+
+ TEST_RR("qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qsub lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdsub lr, r",9, VAL2,", r",8, VAL1,"")
+
+ TEST_R("rev.w r0, r",0, VAL1,"")
+ TEST_R("rev r14, r",12, VAL2,"")
+ TEST_R("rev16.w r0, r",0, VAL1,"")
+ TEST_R("rev16 r14, r",12, VAL2,"")
+ TEST_R("rbit r0, r",0, VAL1,"")
+ TEST_R("rbit r14, r",12, VAL2,"")
+ TEST_R("revsh.w r0, r",0, VAL1,"")
+ TEST_R("revsh r14, r",12, VAL2,"")
+
+ TEST_UNSUPPORTED(".short 0xfa9c,0xff8c @ rev pc, r12");
+ TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c @ rev sp, r12");
+ TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f @ rev r14, pc");
+ TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d @ rev r14, sp");
+
+ TEST_RR("sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR("sel r14, r",12,VAL1,", r",10, VAL2,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clz r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+
+ TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+
+ TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mul r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xff09 @ mul pc, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xfd09 @ mul sp, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb0f,0xf709 @ mul r7, pc, r9")
+ TEST_UNSUPPORTED(".short 0xfb0d,0xf709 @ mul r7, sp, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70f @ mul r7, r8, pc")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70d @ mul r7, r8, sp")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mla r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xaf09 @ mla pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xad09 @ mla sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0f,0xa709 @ mla r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0d,0xa709 @ mla r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70f @ mla r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70d @ mla r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xd709 @ mla r7, r8, r9, sp");
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mls r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbt r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+
+ TEST_GROUP("Long multiply, long multiply accumulate, and divide")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_UNSUPPORTED(".short 0xfb89,0xf80a @ smull pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0xd80a @ smull sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7f0a @ smull r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7d0a @ smull r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb8f,0x780a @ smull r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb8d,0x780a @ smull r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780f @ smull r7, r8, r9, pc");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780d @ smull r7, r8, r9, sp");
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "smlsld r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsld r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlsldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "umaal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umaal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xffff,0xffff")
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("sub.w r0, r0")
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
new file mode 100644
index 0000000..e17cdd6
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.c
@@ -0,0 +1,1748 @@
+/*
+ * arch/arm/kernel/kprobes-test.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This file contains test code for ARM kprobes.
+ *
+ * The top level function run_all_tests() executes tests for all of the
+ * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests
+ * fall into two categories; run_api_tests() checks basic functionality of the
+ * kprobes API, and run_test_cases() is a comprehensive test for kprobes
+ * instruction decoding and simulation.
+ *
+ * run_test_cases() first checks the kprobes decoding table for self consistency
+ * (using table_test()) then executes a series of test cases for each of the CPU
+ * instruction forms. coverage_start() and coverage_end() are used to verify
+ * that these test cases cover all of the possible combinations of instructions
+ * described by the kprobes decoding tables.
+ *
+ * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c
+ * which use the macros defined in kprobes-test.h. The rest of this
+ * documentation will describe the operation of the framework used by these
+ * test cases.
+ */
+
+/*
+ * TESTING METHODOLOGY
+ * -------------------
+ *
+ * The methodology used to test an ARM instruction 'test_insn' is to use
+ * inline assembler like:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ *
+ * When the test case is run a kprobe is placed of each nop. The
+ * post-handler of the test_before probe is used to modify the saved CPU
+ * register context to that which we require for the test case. The
+ * pre-handler of the of the test_after probe saves a copy of the CPU
+ * register context. In this way we can execute test_insn with a specific
+ * register context and see the results afterwards.
+ *
+ * To actually test the kprobes instruction emulation we perform the above
+ * step a second time but with an additional kprobe on the test_case
+ * instruction itself. If the emulation is accurate then the results seen
+ * by the test_after probe will be identical to the first run which didn't
+ * have a probe on test_case.
+ *
+ * Each test case is run several times with a variety of variations in the
+ * flags value of stored in CPSR, and for Thumb code, different ITState.
+ *
+ * For instructions which can modify PC, a second test_after probe is used
+ * like this:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * b test_done
+ * test_after2: nop
+ * test_done:
+ *
+ * The test case is constructed such that test_insn branches to
+ * test_after2, or, if testing a conditional instruction, it may just
+ * continue to test_after. The probes inserted at both locations let us
+ * determine which happened. A similar approach is used for testing
+ * backwards branches...
+ *
+ * b test_before
+ * b test_done @ helps to cope with off by 1 branches
+ * test_after2: nop
+ * b test_done
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * test_done:
+ *
+ * The macros used to generate the assembler instructions describe above
+ * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B
+ * (branch backwards). In these, the local variables numbered 1, 50, 2 and
+ * 99 represent: test_before, test_case, test_after2 and test_done.
+ *
+ * FRAMEWORK
+ * ---------
+ *
+ * Each test case is wrapped between the pair of macros TESTCASE_START and
+ * TESTCASE_END. As well as performing the inline assembler boilerplate,
+ * these call out to the kprobes_test_case_start() and
+ * kprobes_test_case_end() functions which drive the execution of the test
+ * case. The specific arguments to use for each test case are stored as
+ * inline data constructed using the various TEST_ARG_* macros. Putting
+ * this all together, a simple test case may look like:
+ *
+ * TESTCASE_START("Testing mov r0, r7")
+ * TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678
+ * TEST_ARG_END("")
+ * TEST_INSTRUCTION("mov r0, r7")
+ * TESTCASE_END
+ *
+ * Note, in practice the single convenience macro TEST_R would be used for this
+ * instead.
+ *
+ * The above would expand to assembler looking something like:
+ *
+ * @ TESTCASE_START
+ * bl __kprobes_test_case_start
+ * @ start of inline data...
+ * .ascii "mov r0, r7" @ text title for test case
+ * .byte 0
+ * .align 2
+ *
+ * @ TEST_ARG_REG
+ * .byte ARG_TYPE_REG
+ * .byte 7
+ * .short 0
+ * .word 0x1234567
+ *
+ * @ TEST_ARG_END
+ * .byte ARG_TYPE_END
+ * .byte TEST_ISA @ flags, including ISA being tested
+ * .short 50f-0f @ offset of 'test_before'
+ * .short 2f-0f @ offset of 'test_after2' (if relevent)
+ * .short 99f-0f @ offset of 'test_done'
+ * @ start of test case code...
+ * 0:
+ * .code TEST_ISA @ switch to ISA being tested
+ *
+ * @ TEST_INSTRUCTION
+ * 50: nop @ location for 'test_before' probe
+ * 1: mov r0, r7 @ the test case instruction 'test_insn'
+ * nop @ location for 'test_after' probe
+ *
+ * // TESTCASE_END
+ * 2:
+ * 99: bl __kprobes_test_case_end_##TEST_ISA
+ * .code NONMAL_ISA
+ *
+ * When the above is execute the following happens...
+ *
+ * __kprobes_test_case_start() is an assembler wrapper which sets up space
+ * for a stack buffer and calls the C function kprobes_test_case_start().
+ * This C function will do some initial processing of the inline data and
+ * setup some global state. It then inserts the test_before and test_after
+ * kprobes and returns a value which causes the assembler wrapper to jump
+ * to the start of the test case code, (local label '0').
+ *
+ * When the test case code executes, the test_before probe will be hit and
+ * test_before_post_handler will call setup_test_context(). This fills the
+ * stack buffer and CPU registers with a test pattern and then processes
+ * the test case arguments. In our example there is one TEST_ARG_REG which
+ * indicates that R7 should be loaded with the value 0x12345678.
+ *
+ * When the test_before probe ends, the test case continues and executes
+ * the "mov r0, r7" instruction. It then hits the test_after probe and the
+ * pre-handler for this (test_after_pre_handler) will save a copy of the
+ * CPU register context. This should now have R0 holding the same value as
+ * R7.
+ *
+ * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is
+ * an assembler wrapper which switches back to the ISA used by the test
+ * code and calls the C function kprobes_test_case_end().
+ *
+ * For each run through the test case, test_case_run_count is incremented
+ * by one. For even runs, kprobes_test_case_end() saves a copy of the
+ * register and stack buffer contents from the test case just run. It then
+ * inserts a kprobe on the test case instruction 'test_insn' and returns a
+ * value to cause the test case code to be re-run.
+ *
+ * For odd numbered runs, kprobes_test_case_end() compares the register and
+ * stack buffer contents to those that were saved on the previous even
+ * numbered run (the one without the kprobe on test_insn). These should be
+ * the same if the kprobe instruction simulation routine is correct.
+ *
+ * The pair of test case runs is repeated with different combinations of
+ * flag values in CPSR and, for Thumb, different ITState. This is
+ * controlled by test_context_cpsr().
+ *
+ * BUILDING TEST CASES
+ * -------------------
+ *
+ *
+ * As an aid to building test cases, the stack buffer is initialised with
+ * some special values:
+ *
+ * [SP+13*4] Contains SP+120. This can be used to test instructions
+ * which load a value into SP.
+ *
+ * [SP+15*4] When testing branching instructions using TEST_BRANCH_{F,B},
+ * this holds the target address of the branch, 'test_after2'.
+ * This can be used to test instructions which load a PC value
+ * from memory.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+#include "kprobes-test.h"
+
+
+#define BENCHMARKING 1
+
+
+/*
+ * Test basic API
+ */
+
+static bool test_regs_ok;
+static int test_func_instance;
+static int pre_handler_called;
+static int post_handler_called;
+static int jprobe_func_called;
+static int kretprobe_handler_called;
+
+#define FUNC_ARG1 0x12345678
+#define FUNC_ARG2 0xabcdef
+
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+long arm_func(long r0, long r1);
+
+static void __used __naked __arm_kprobes_test_func(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ ".type arm_func, %%function \n\t"
+ "arm_func: \n\t"
+ "adds r0, r0, r1 \n\t"
+ "bx lr \n\t"
+ ".code "NORMAL_ISA /* Back to Thumb if necessary */
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+long thumb16_func(long r0, long r1);
+long thumb32even_func(long r0, long r1);
+long thumb32odd_func(long r0, long r1);
+
+static void __used __naked __thumb_kprobes_test_funcs(void)
+{
+ __asm__ __volatile__ (
+ ".type thumb16_func, %%function \n\t"
+ "thumb16_func: \n\t"
+ "adds.n r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ ".type thumb32even_func, %%function \n\t"
+ "thumb32even_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ "nop.n \n\t"
+ ".type thumb32odd_func, %%function \n\t"
+ "thumb32odd_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+
+static int call_test_func(long (*func)(long, long), bool check_test_regs)
+{
+ long ret;
+
+ ++test_func_instance;
+ test_regs_ok = false;
+
+ ret = (*func)(FUNC_ARG1, FUNC_ARG2);
+ if (ret != FUNC_ARG1 + FUNC_ARG2) {
+ pr_err("FAIL: call_test_func: func returned %lx\n", ret);
+ return false;
+ }
+
+ if (check_test_regs && !test_regs_ok) {
+ pr_err("FAIL: test regs not OK\n");
+ return false;
+ }
+
+ return true;
+}
+
+static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ pre_handler_called = test_func_instance;
+ if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ post_handler_called = test_func_instance;
+ if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2)
+ test_regs_ok = false;
+}
+
+static struct kprobe the_kprobe = {
+ .addr = 0,
+ .pre_handler = pre_handler,
+ .post_handler = post_handler
+};
+
+static int test_kprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kprobe.addr = (kprobe_opcode_t *)func;
+ ret = register_kprobe(&the_kprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kprobe(&the_kprobe);
+ the_kprobe.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (pre_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe pre_handler not called\n");
+ return -EINVAL;
+ }
+ if (post_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe post_handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (pre_handler_called == test_func_instance ||
+ post_handler_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void __kprobes jprobe_func(long r0, long r1)
+{
+ jprobe_func_called = test_func_instance;
+ if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ jprobe_return();
+}
+
+static struct jprobe the_jprobe = {
+ .entry = jprobe_func,
+};
+
+static int test_jprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_jprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_jprobe(&the_jprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_jprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_jprobe(&the_jprobe);
+ the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (jprobe_func_called != test_func_instance) {
+ pr_err("FAIL: jprobe handler function not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __kprobes
+kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ kretprobe_handler_called = test_func_instance;
+ if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static struct kretprobe the_kretprobe = {
+ .handler = kretprobe_handler,
+};
+
+static int test_kretprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kretprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_kretprobe(&the_kretprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kretprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kretprobe(&the_kretprobe);
+ the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (kretprobe_handler_called != test_func_instance) {
+ pr_err("FAIL: kretprobe handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: kretprobe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int run_api_tests(long (*func)(long, long))
+{
+ int ret;
+
+ pr_info(" kprobe\n");
+ ret = test_kprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" jprobe\n");
+ ret = test_jprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" kretprobe\n");
+ ret = test_kretprobe(func);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+
+/*
+ * Benchmarking
+ */
+
+#if BENCHMARKING
+
+static void __naked benchmark_nop(void)
+{
+ __asm__ __volatile__ (
+ "nop \n\t"
+ "bx lr"
+ );
+}
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define wide ".w"
+#else
+#define wide
+#endif
+
+static void __naked benchmark_pushpop1(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r3-r11,lr} \n\t"
+ "ldmia"wide" sp!, {r3-r11,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop2(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0-r8,lr} \n\t"
+ "ldmia"wide" sp!, {r0-r8,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop3(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r4,lr} \n\t"
+ "ldmia"wide" sp!, {r4,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop4(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0,lr} \n\t"
+ "ldmia"wide" sp!, {r0,pc}"
+ );
+}
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+static void __naked benchmark_pushpop_thumb(void)
+{
+ __asm__ __volatile__ (
+ "push.n {r0-r7,lr} \n\t"
+ "pop.n {r0-r7,pc}"
+ );
+}
+
+#endif
+
+static int __kprobes
+benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ return 0;
+}
+
+static int benchmark(void(*fn)(void))
+{
+ unsigned n, i, t, t0;
+
+ for (n = 1000; ; n *= 2) {
+ t0 = sched_clock();
+ for (i = n; i > 0; --i)
+ fn();
+ t = sched_clock() - t0;
+ if (t >= 250000000)
+ break; /* Stop once we took more than 0.25 seconds */
+ }
+ return t / n; /* Time for one iteration in nanoseconds */
+};
+
+static int kprobe_benchmark(void(*fn)(void), unsigned offset)
+{
+ struct kprobe k = {
+ .addr = (kprobe_opcode_t *)((uintptr_t)fn + offset),
+ .pre_handler = benchmark_pre_handler,
+ };
+
+ int ret = register_kprobe(&k);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = benchmark(fn);
+
+ unregister_kprobe(&k);
+ return ret;
+};
+
+struct benchmarks {
+ void (*fn)(void);
+ unsigned offset;
+ const char *title;
+};
+
+static int run_benchmarks(void)
+{
+ int ret;
+ struct benchmarks list[] = {
+ {&benchmark_nop, 0, "nop"},
+ /*
+ * benchmark_pushpop{1,3} will have the optimised
+ * instruction emulation, whilst benchmark_pushpop{2,4} will
+ * be the equivalent unoptimised instructions.
+ */
+ {&benchmark_pushpop1, 0, "stmdb sp!, {r3-r11,lr}"},
+ {&benchmark_pushpop1, 4, "ldmia sp!, {r3-r11,pc}"},
+ {&benchmark_pushpop2, 0, "stmdb sp!, {r0-r8,lr}"},
+ {&benchmark_pushpop2, 4, "ldmia sp!, {r0-r8,pc}"},
+ {&benchmark_pushpop3, 0, "stmdb sp!, {r4,lr}"},
+ {&benchmark_pushpop3, 4, "ldmia sp!, {r4,pc}"},
+ {&benchmark_pushpop4, 0, "stmdb sp!, {r0,lr}"},
+ {&benchmark_pushpop4, 4, "ldmia sp!, {r0,pc}"},
+#ifdef CONFIG_THUMB2_KERNEL
+ {&benchmark_pushpop_thumb, 0, "push.n {r0-r7,lr}"},
+ {&benchmark_pushpop_thumb, 2, "pop.n {r0-r7,pc}"},
+#endif
+ {0}
+ };
+
+ struct benchmarks *b;
+ for (b = list; b->fn; ++b) {
+ ret = kprobe_benchmark(b->fn, b->offset);
+ if (ret < 0)
+ return ret;
+ pr_info(" %dns for kprobe %s\n", ret, b->title);
+ }
+
+ pr_info("\n");
+ return 0;
+}
+
+#endif /* BENCHMARKING */
+
+
+/*
+ * Decoding table self-consistency tests
+ */
+
+static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
+ [DECODE_TYPE_TABLE] = sizeof(struct decode_table),
+ [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom),
+ [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate),
+ [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate),
+ [DECODE_TYPE_OR] = sizeof(struct decode_or),
+ [DECODE_TYPE_REJECT] = sizeof(struct decode_reject)
+};
+
+static int table_iter(const union decode_item *table,
+ int (*fn)(const struct decode_header *, void *),
+ void *args)
+{
+ const struct decode_header *h = (struct decode_header *)table;
+ int result;
+
+ for (;;) {
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (type == DECODE_TYPE_END)
+ return 0;
+
+ result = fn(h, args);
+ if (result)
+ return result;
+
+ h = (struct decode_header *)
+ ((uintptr_t)h + decode_struct_sizes[type]);
+
+ }
+}
+
+static int table_test_fail(const struct decode_header *h, const char* message)
+{
+
+ pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n",
+ message, h->mask.bits, h->value.bits);
+ return -EINVAL;
+}
+
+struct table_test_args {
+ const union decode_item *root_table;
+ u32 parent_mask;
+ u32 parent_value;
+};
+
+static int table_test_fn(const struct decode_header *h, void *args)
+{
+ struct table_test_args *a = (struct table_test_args *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (h->value.bits & ~h->mask.bits)
+ return table_test_fail(h, "Match value has bits not in mask");
+
+ if ((h->mask.bits & a->parent_mask) != a->parent_mask)
+ return table_test_fail(h, "Mask has bits not in parent mask");
+
+ if ((h->value.bits ^ a->parent_value) & a->parent_mask)
+ return table_test_fail(h, "Value is inconsistent with parent");
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ struct table_test_args args2 = *a;
+ args2.parent_mask = h->mask.bits;
+ args2.parent_value = h->value.bits;
+ return table_iter(d->table.table, table_test_fn, &args2);
+ }
+
+ return 0;
+}
+
+static int table_test(const union decode_item *table)
+{
+ struct table_test_args args = {
+ .root_table = table,
+ .parent_mask = 0,
+ .parent_value = 0
+ };
+ return table_iter(args.root_table, table_test_fn, &args);
+}
+
+
+/*
+ * Decoding table test coverage analysis
+ *
+ * coverage_start() builds a coverage_table which contains a list of
+ * coverage_entry's to match each entry in the specified kprobes instruction
+ * decoding table.
+ *
+ * When test cases are run, coverage_add() is called to process each case.
+ * This looks up the corresponding entry in the coverage_table and sets it as
+ * being matched, as well as clearing the regs flag appropriate for the test.
+ *
+ * After all test cases have been run, coverage_end() is called to check that
+ * all entries in coverage_table have been matched and that all regs flags are
+ * cleared. I.e. that all possible combinations of instructions described by
+ * the kprobes decoding tables have had a test case executed for them.
+ */
+
+bool coverage_fail;
+
+#define MAX_COVERAGE_ENTRIES 256
+
+struct coverage_entry {
+ const struct decode_header *header;
+ unsigned regs;
+ unsigned nesting;
+ char matched;
+};
+
+struct coverage_table {
+ struct coverage_entry *base;
+ unsigned num_entries;
+ unsigned nesting;
+};
+
+struct coverage_table coverage;
+
+#define COVERAGE_ANY_REG (1<<0)
+#define COVERAGE_SP (1<<1)
+#define COVERAGE_PC (1<<2)
+#define COVERAGE_PCWB (1<<3)
+
+static const char coverage_register_lookup[16] = {
+ [REG_TYPE_ANY] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_SAMEAS16] = COVERAGE_ANY_REG,
+ [REG_TYPE_SP] = COVERAGE_SP,
+ [REG_TYPE_PC] = COVERAGE_PC,
+ [REG_TYPE_NOSP] = COVERAGE_ANY_REG | COVERAGE_SP,
+ [REG_TYPE_NOSPPC] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_NOPC] = COVERAGE_ANY_REG | COVERAGE_PC,
+ [REG_TYPE_NOPCWB] = COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB,
+ [REG_TYPE_NOPCX] = COVERAGE_ANY_REG,
+ [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP,
+};
+
+unsigned coverage_start_registers(const struct decode_header *h)
+{
+ unsigned regs = 0;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf;
+ regs |= coverage_register_lookup[r] << i;
+ }
+ return regs;
+}
+
+static int coverage_start_fn(const struct decode_header *h, void *args)
+{
+ struct coverage_table *coverage = (struct coverage_table *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+ struct coverage_entry *entry = coverage->base + coverage->num_entries;
+
+ if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) {
+ pr_err("FAIL: Out of space for test coverage data");
+ return -ENOMEM;
+ }
+
+ ++coverage->num_entries;
+
+ entry->header = h;
+ entry->regs = coverage_start_registers(h);
+ entry->nesting = coverage->nesting;
+ entry->matched = false;
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ int ret;
+ ++coverage->nesting;
+ ret = table_iter(d->table.table, coverage_start_fn, coverage);
+ --coverage->nesting;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int coverage_start(const union decode_item *table)
+{
+ coverage.base = kmalloc(MAX_COVERAGE_ENTRIES *
+ sizeof(struct coverage_entry), GFP_KERNEL);
+ coverage.num_entries = 0;
+ coverage.nesting = 0;
+ return table_iter(table, coverage_start_fn, &coverage);
+}
+
+static void
+coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn)
+{
+ int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ enum decode_reg_type reg_type = (regs >> i) & 0xf;
+ int reg = (insn >> i) & 0xf;
+ int flag;
+
+ if (!reg_type)
+ continue;
+
+ if (reg == 13)
+ flag = COVERAGE_SP;
+ else if (reg == 15)
+ flag = COVERAGE_PC;
+ else
+ flag = COVERAGE_ANY_REG;
+ entry->regs &= ~(flag << i);
+
+ switch (reg_type) {
+
+ case REG_TYPE_NONE:
+ case REG_TYPE_ANY:
+ case REG_TYPE_SAMEAS16:
+ break;
+
+ case REG_TYPE_SP:
+ if (reg != 13)
+ return;
+ break;
+
+ case REG_TYPE_PC:
+ if (reg != 15)
+ return;
+ break;
+
+ case REG_TYPE_NOSP:
+ if (reg == 13)
+ return;
+ break;
+
+ case REG_TYPE_NOSPPC:
+ case REG_TYPE_NOSPPCX:
+ if (reg == 13 || reg == 15)
+ return;
+ break;
+
+ case REG_TYPE_NOPCWB:
+ if (!is_writeback(insn))
+ break;
+ if (reg == 15) {
+ entry->regs &= ~(COVERAGE_PCWB << i);
+ return;
+ }
+ break;
+
+ case REG_TYPE_NOPC:
+ case REG_TYPE_NOPCX:
+ if (reg == 15)
+ return;
+ break;
+ }
+
+ }
+}
+
+static void coverage_add(kprobe_opcode_t insn)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+ bool matched = false;
+ unsigned nesting = 0;
+
+ for (; entry < end; ++entry) {
+ const struct decode_header *h = entry->header;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (entry->nesting > nesting)
+ continue; /* Skip sub-table we didn't match */
+
+ if (entry->nesting < nesting)
+ break; /* End of sub-table we were scanning */
+
+ if (!matched) {
+ if ((insn & h->mask.bits) != h->value.bits)
+ continue;
+ entry->matched = true;
+ }
+
+ switch (type) {
+
+ case DECODE_TYPE_TABLE:
+ ++nesting;
+ break;
+
+ case DECODE_TYPE_CUSTOM:
+ case DECODE_TYPE_SIMULATE:
+ case DECODE_TYPE_EMULATE:
+ coverage_add_registers(entry, insn);
+ return;
+
+ case DECODE_TYPE_OR:
+ matched = true;
+ break;
+
+ case DECODE_TYPE_REJECT:
+ default:
+ return;
+ }
+
+ }
+}
+
+static void coverage_end(void)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+
+ for (; entry < end; ++entry) {
+ u32 mask = entry->header->mask.bits;
+ u32 value = entry->header->value.bits;
+
+ if (entry->regs) {
+ pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n",
+ mask, value, entry->regs);
+ coverage_fail = true;
+ }
+ if (!entry->matched) {
+ pr_err("FAIL: Test coverage entry missing for %08x %08x\n",
+ mask, value);
+ coverage_fail = true;
+ }
+ }
+
+ kfree(coverage.base);
+}
+
+
+/*
+ * Framework for instruction set test cases
+ */
+
+void __naked __kprobes_test_case_start(void)
+{
+ __asm__ __volatile__ (
+ "stmdb sp!, {r4-r11} \n\t"
+ "sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "bic r0, lr, #1 @ r0 = inline title string \n\t"
+ "mov r1, sp \n\t"
+ "bl kprobes_test_case_start \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "movne pc, r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "mov pc, r0 \n\t"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+void __naked __kprobes_test_case_end_16(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "bxne r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ "orr lr, lr, #1 @ will return to Thumb code \n\t"
+ "ldr pc, 1f \n\t"
+ "1: \n\t"
+ ".word __kprobes_test_case_end_16 \n\t"
+ );
+}
+
+#endif
+
+
+int kprobe_test_flags;
+int kprobe_test_cc_position;
+
+static int test_try_count;
+static int test_pass_count;
+static int test_fail_count;
+
+static struct pt_regs initial_regs;
+static struct pt_regs expected_regs;
+static struct pt_regs result_regs;
+
+static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)];
+
+static const char *current_title;
+static struct test_arg *current_args;
+static u32 *current_stack;
+static uintptr_t current_branch_target;
+
+static uintptr_t current_code_start;
+static kprobe_opcode_t current_instruction;
+
+
+#define TEST_CASE_PASSED -1
+#define TEST_CASE_FAILED -2
+
+static int test_case_run_count;
+static bool test_case_is_thumb;
+static int test_instance;
+
+/*
+ * We ignore the state of the imprecise abort disable flag (CPSR.A) because this
+ * can change randomly as the kernel doesn't take care to preserve or initialise
+ * this across context switches. Also, with Security Extentions, the flag may
+ * not be under control of the kernel; for this reason we ignore the state of
+ * the FIQ disable flag CPSR.F as well.
+ */
+#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT)
+
+static unsigned long test_check_cc(int cc, unsigned long cpsr)
+{
+ unsigned long temp;
+
+ switch (cc) {
+ case 0x0: /* eq */
+ return cpsr & PSR_Z_BIT;
+
+ case 0x1: /* ne */
+ return (~cpsr) & PSR_Z_BIT;
+
+ case 0x2: /* cs */
+ return cpsr & PSR_C_BIT;
+
+ case 0x3: /* cc */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0x4: /* mi */
+ return cpsr & PSR_N_BIT;
+
+ case 0x5: /* pl */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0x6: /* vs */
+ return cpsr & PSR_V_BIT;
+
+ case 0x7: /* vc */
+ return (~cpsr) & PSR_V_BIT;
+
+ case 0x8: /* hi */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return cpsr & PSR_C_BIT;
+
+ case 0x9: /* ls */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0xa: /* ge */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0xb: /* lt */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return cpsr & PSR_N_BIT;
+
+ case 0xc: /* gt */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return (~temp) & PSR_N_BIT;
+
+ case 0xd: /* le */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return temp & PSR_N_BIT;
+
+ case 0xe: /* al */
+ case 0xf: /* unconditional */
+ return true;
+ }
+ BUG();
+ return false;
+}
+
+static int is_last_scenario;
+static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */
+static int memory_needs_checking;
+
+static unsigned long test_context_cpsr(int scenario)
+{
+ unsigned long cpsr;
+
+ probe_should_run = 1;
+
+ /* Default case is that we cycle through 16 combinations of flags */
+ cpsr = (scenario & 0xf) << 28; /* N,Z,C,V flags */
+ cpsr |= (scenario & 0xf) << 16; /* GE flags */
+ cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */
+
+ if (!test_case_is_thumb) {
+ /* Testing ARM code */
+ probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) {
+ /* Testing Thumb code without setting ITSTATE */
+ if (kprobe_test_cc_position) {
+ int cc = (current_instruction >> kprobe_test_cc_position) & 0xf;
+ probe_should_run = test_check_cc(cc, cpsr) != 0;
+ }
+
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) {
+ /* Testing Thumb code with all combinations of ITSTATE */
+ unsigned x = (scenario >> 4);
+ unsigned cond_base = x % 7; /* ITSTATE<7:5> */
+ unsigned mask = x / 7 + 2; /* ITSTATE<4:0>, bits reversed */
+
+ if (mask > 0x1f) {
+ /* Finish by testing state from instruction 'itt al' */
+ cond_base = 7;
+ mask = 0x4;
+ if ((scenario & 0xf) == 0xf)
+ is_last_scenario = true;
+ }
+
+ cpsr |= cond_base << 13; /* ITSTATE<7:5> */
+ cpsr |= (mask & 0x1) << 12; /* ITSTATE<4> */
+ cpsr |= (mask & 0x2) << 10; /* ITSTATE<3> */
+ cpsr |= (mask & 0x4) << 8; /* ITSTATE<2> */
+ cpsr |= (mask & 0x8) << 23; /* ITSTATE<1> */
+ cpsr |= (mask & 0x10) << 21; /* ITSTATE<0> */
+
+ probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0;
+
+ } else {
+ /* Testing Thumb code with several combinations of ITSTATE */
+ switch (scenario) {
+ case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */
+ cpsr = 0x00000800;
+ probe_should_run = 0;
+ break;
+ case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */
+ cpsr = 0xf0007800;
+ probe_should_run = 0;
+ break;
+ case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */
+ cpsr = 0x00009800;
+ break;
+ case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */
+ cpsr = 0xf0002800;
+ is_last_scenario = true;
+ break;
+ }
+ }
+
+ return cpsr;
+}
+
+static void setup_test_context(struct pt_regs *regs)
+{
+ int scenario = test_case_run_count>>1;
+ unsigned long val;
+ struct test_arg *args;
+ int i;
+
+ is_last_scenario = false;
+ memory_needs_checking = false;
+
+ /* Initialise test memory on stack */
+ val = (scenario & 1) ? VALM : ~VALM;
+ for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i)
+ current_stack[i] = val + (i << 8);
+ /* Put target of branch on stack for tests which load PC from memory */
+ if (current_branch_target)
+ current_stack[15] = current_branch_target;
+ /* Put a value for SP on stack for tests which load SP from memory */
+ current_stack[13] = (u32)current_stack + 120;
+
+ /* Initialise register values to their default state */
+ val = (scenario & 2) ? VALR : ~VALR;
+ for (i = 0; i < 13; ++i)
+ regs->uregs[i] = val ^ (i << 8);
+ regs->ARM_lr = val ^ (14 << 8);
+ regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK);
+ regs->ARM_cpsr |= test_context_cpsr(scenario);
+
+ /* Perform testcase specific register setup */
+ args = current_args;
+ for (; args[0].type != ARG_TYPE_END; ++args)
+ switch (args[0].type) {
+ case ARG_TYPE_REG: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] = arg->val;
+ break;
+ }
+ case ARG_TYPE_PTR: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] =
+ (unsigned long)current_stack + arg->val;
+ memory_needs_checking = true;
+ break;
+ }
+ case ARG_TYPE_MEM: {
+ struct test_arg_mem *arg = (struct test_arg_mem *)args;
+ current_stack[arg->index] = arg->val;
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+struct test_probe {
+ struct kprobe kprobe;
+ bool registered;
+ int hit;
+};
+
+static void unregister_test_probe(struct test_probe *probe)
+{
+ if (probe->registered) {
+ unregister_kprobe(&probe->kprobe);
+ probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */
+ }
+ probe->registered = false;
+}
+
+static int register_test_probe(struct test_probe *probe)
+{
+ int ret;
+
+ if (probe->registered)
+ BUG();
+
+ ret = register_kprobe(&probe->kprobe);
+ if (ret >= 0) {
+ probe->registered = true;
+ probe->hit = -1;
+ }
+ return ret;
+}
+
+static int __kprobes
+test_before_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static void __kprobes
+test_before_post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ setup_test_context(regs);
+ initial_regs = *regs;
+ initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+}
+
+static int __kprobes
+test_case_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static int __kprobes
+test_after_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ if (container_of(p, struct test_probe, kprobe)->hit == test_instance)
+ return 0; /* Already run for this test instance */
+
+ result_regs = *regs;
+ result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+
+ /* Undo any changes done to SP by the test case */
+ regs->ARM_sp = (unsigned long)current_stack;
+
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static struct test_probe test_before_probe = {
+ .kprobe.pre_handler = test_before_pre_handler,
+ .kprobe.post_handler = test_before_post_handler,
+};
+
+static struct test_probe test_case_probe = {
+ .kprobe.pre_handler = test_case_pre_handler,
+};
+
+static struct test_probe test_after_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static struct test_probe test_after2_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static void test_case_cleanup(void)
+{
+ unregister_test_probe(&test_before_probe);
+ unregister_test_probe(&test_case_probe);
+ unregister_test_probe(&test_after_probe);
+ unregister_test_probe(&test_after2_probe);
+}
+
+static void print_registers(struct pt_regs *regs)
+{
+ pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n",
+ regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
+ pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n",
+ regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7);
+ pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n",
+ regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp);
+ pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n",
+ regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc);
+ pr_err("cpsr %08lx\n", regs->ARM_cpsr);
+}
+
+static void print_memory(u32 *mem, size_t size)
+{
+ int i;
+ for (i = 0; i < size / sizeof(u32); i += 4)
+ pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1],
+ mem[i+2], mem[i+3]);
+}
+
+static size_t expected_memory_size(u32 *sp)
+{
+ size_t size = sizeof(expected_memory);
+ int offset = (uintptr_t)sp - (uintptr_t)current_stack;
+ if (offset > 0)
+ size -= offset;
+ return size;
+}
+
+static void test_case_failed(const char *message)
+{
+ test_case_cleanup();
+
+ pr_err("FAIL: %s\n", message);
+ pr_err("FAIL: Test %s\n", current_title);
+ pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1);
+}
+
+static unsigned long next_instruction(unsigned long pc)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+ if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
+ return pc + 2;
+ else
+#endif
+ return pc + 4;
+}
+
+static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
+{
+ struct test_arg *args;
+ struct test_arg_end *end_arg;
+ unsigned long test_code;
+
+ args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4);
+
+ current_title = title;
+ current_args = args;
+ current_stack = stack;
+
+ ++test_try_count;
+
+ while (args->type != ARG_TYPE_END)
+ ++args;
+ end_arg = (struct test_arg_end *)args;
+
+ test_code = (unsigned long)(args + 1); /* Code starts after args */
+
+ test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB;
+ if (test_case_is_thumb)
+ test_code |= 1;
+
+ current_code_start = test_code;
+
+ current_branch_target = 0;
+ if (end_arg->branch_offset != end_arg->end_offset)
+ current_branch_target = test_code + end_arg->branch_offset;
+
+ test_code += end_arg->code_offset;
+ test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ test_code = next_instruction(test_code);
+ test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (test_case_is_thumb) {
+ u16 *p = (u16 *)(test_code & ~1);
+ current_instruction = p[0];
+ if (is_wide_instruction(current_instruction)) {
+ current_instruction <<= 16;
+ current_instruction |= p[1];
+ }
+ } else {
+ current_instruction = *(u32 *)test_code;
+ }
+
+ if (current_title[0] == '.')
+ verbose("%s\n", current_title);
+ else
+ verbose("%s\t@ %0*x\n", current_title,
+ test_case_is_thumb ? 4 : 8,
+ current_instruction);
+
+ test_code = next_instruction(test_code);
+ test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) {
+ if (!test_case_is_thumb ||
+ is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 16-bit instruction");
+ goto fail;
+ }
+ } else {
+ if (test_case_is_thumb &&
+ !is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 32-bit instruction");
+ goto fail;
+ }
+ }
+
+ coverage_add(current_instruction);
+
+ if (end_arg->flags & ARG_FLAG_UNSUPPORTED) {
+ if (register_test_probe(&test_case_probe) < 0)
+ goto pass;
+ test_case_failed("registered probe for unsupported instruction");
+ goto fail;
+ }
+
+ if (end_arg->flags & ARG_FLAG_SUPPORTED) {
+ if (register_test_probe(&test_case_probe) >= 0)
+ goto pass;
+ test_case_failed("couldn't register probe for supported instruction");
+ goto fail;
+ }
+
+ if (register_test_probe(&test_before_probe) < 0) {
+ test_case_failed("register test_before_probe failed");
+ goto fail;
+ }
+ if (register_test_probe(&test_after_probe) < 0) {
+ test_case_failed("register test_after_probe failed");
+ goto fail;
+ }
+ if (current_branch_target) {
+ test_after2_probe.kprobe.addr =
+ (kprobe_opcode_t *)current_branch_target;
+ if (register_test_probe(&test_after2_probe) < 0) {
+ test_case_failed("register test_after2_probe failed");
+ goto fail;
+ }
+ }
+
+ /* Start first run of test case */
+ test_case_run_count = 0;
+ ++test_instance;
+ return current_code_start;
+pass:
+ test_case_run_count = TEST_CASE_PASSED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+fail:
+ test_case_run_count = TEST_CASE_FAILED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+}
+
+static bool check_test_results(void)
+{
+ size_t mem_size = 0;
+ u32 *mem = 0;
+
+ if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) {
+ test_case_failed("registers differ");
+ goto fail;
+ }
+
+ if (memory_needs_checking) {
+ mem = (u32 *)result_regs.ARM_sp;
+ mem_size = expected_memory_size(mem);
+ if (memcmp(expected_memory, mem, mem_size)) {
+ test_case_failed("test memory differs");
+ goto fail;
+ }
+ }
+
+ return true;
+
+fail:
+ pr_err("initial_regs:\n");
+ print_registers(&initial_regs);
+ pr_err("expected_regs:\n");
+ print_registers(&expected_regs);
+ pr_err("result_regs:\n");
+ print_registers(&result_regs);
+
+ if (mem) {
+ pr_err("current_stack=%p\n", current_stack);
+ pr_err("expected_memory:\n");
+ print_memory(expected_memory, mem_size);
+ pr_err("result_memory:\n");
+ print_memory(mem, mem_size);
+ }
+
+ return false;
+}
+
+static uintptr_t __used kprobes_test_case_end(void)
+{
+ if (test_case_run_count < 0) {
+ if (test_case_run_count == TEST_CASE_PASSED)
+ /* kprobes_test_case_start did all the needed testing */
+ goto pass;
+ else
+ /* kprobes_test_case_start failed */
+ goto fail;
+ }
+
+ if (test_before_probe.hit != test_instance) {
+ test_case_failed("test_before_handler not run");
+ goto fail;
+ }
+
+ if (test_after_probe.hit != test_instance &&
+ test_after2_probe.hit != test_instance) {
+ test_case_failed("test_after_handler not run");
+ goto fail;
+ }
+
+ /*
+ * Even numbered test runs ran without a probe on the test case so
+ * we can gather reference results. The subsequent odd numbered run
+ * will have the probe inserted.
+ */
+ if ((test_case_run_count & 1) == 0) {
+ /* Save results from run without probe */
+ u32 *mem = (u32 *)result_regs.ARM_sp;
+ expected_regs = result_regs;
+ memcpy(expected_memory, mem, expected_memory_size(mem));
+
+ /* Insert probe onto test case instruction */
+ if (register_test_probe(&test_case_probe) < 0) {
+ test_case_failed("register test_case_probe failed");
+ goto fail;
+ }
+ } else {
+ /* Check probe ran as expected */
+ if (probe_should_run == 1) {
+ if (test_case_probe.hit != test_instance) {
+ test_case_failed("test_case_handler not run");
+ goto fail;
+ }
+ } else if (probe_should_run == 0) {
+ if (test_case_probe.hit == test_instance) {
+ test_case_failed("test_case_handler ran");
+ goto fail;
+ }
+ }
+
+ /* Remove probe for any subsequent reference run */
+ unregister_test_probe(&test_case_probe);
+
+ if (!check_test_results())
+ goto fail;
+
+ if (is_last_scenario)
+ goto pass;
+ }
+
+ /* Do next test run */
+ ++test_case_run_count;
+ ++test_instance;
+ return current_code_start;
+fail:
+ ++test_fail_count;
+ goto end;
+pass:
+ ++test_pass_count;
+end:
+ test_case_cleanup();
+ return 0;
+}
+
+
+/*
+ * Top level test functions
+ */
+
+static int run_test_cases(void (*tests)(void), const union decode_item *table)
+{
+ int ret;
+
+ pr_info(" Check decoding tables\n");
+ ret = table_test(table);
+ if (ret)
+ return ret;
+
+ pr_info(" Run test cases\n");
+ ret = coverage_start(table);
+ if (ret)
+ return ret;
+
+ tests();
+
+ coverage_end();
+ return 0;
+}
+
+
+static int __init run_all_tests(void)
+{
+ int ret = 0;
+
+ pr_info("Begining kprobe tests...\n");
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+ pr_info("Probe ARM code\n");
+ ret = run_api_tests(arm_func);
+ if (ret)
+ goto out;
+
+ pr_info("ARM instruction simulation\n");
+ ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table);
+ if (ret)
+ goto out;
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+ pr_info("Probe 16-bit Thumb code\n");
+ ret = run_api_tests(thumb16_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, even halfword\n");
+ ret = run_api_tests(thumb32even_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, odd halfword\n");
+ ret = run_api_tests(thumb32odd_func);
+ if (ret)
+ goto out;
+
+ pr_info("16-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb16_test_cases,
+ kprobe_decode_thumb16_table);
+ if (ret)
+ goto out;
+
+ pr_info("32-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb32_test_cases,
+ kprobe_decode_thumb32_table);
+ if (ret)
+ goto out;
+#endif
+
+ pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n",
+ test_try_count, test_pass_count, test_fail_count);
+ if (test_fail_count) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+#if BENCHMARKING
+ pr_info("Benchmarks\n");
+ ret = run_benchmarks();
+ if (ret)
+ goto out;
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ /* We are able to run all test cases so coverage should be complete */
+ if (coverage_fail) {
+ pr_err("FAIL: Test coverage checks failed\n");
+ ret = -EINVAL;
+ goto out;
+ }
+#endif
+
+out:
+ if (ret == 0)
+ pr_info("Finished kprobe tests OK\n");
+ else
+ pr_err("kprobe tests failed\n");
+
+ return ret;
+}
+
+
+/*
+ * Module setup
+ */
+
+#ifdef MODULE
+
+static void __exit kprobe_test_exit(void)
+{
+}
+
+module_init(run_all_tests)
+module_exit(kprobe_test_exit)
+MODULE_LICENSE("GPL");
+
+#else /* !MODULE */
+
+late_initcall(run_all_tests);
+
+#endif
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
new file mode 100644
index 0000000..0dc5d77
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.h
@@ -0,0 +1,392 @@
+/*
+ * arch/arm/kernel/kprobes-test.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define VERBOSE 0 /* Set to '1' for more logging of test cases */
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define NORMAL_ISA "16"
+#else
+#define NORMAL_ISA "32"
+#endif
+
+
+/* Flags used in kprobe_test_flags */
+#define TEST_FLAG_NO_ITBLOCK (1<<0)
+#define TEST_FLAG_FULL_ITBLOCK (1<<1)
+#define TEST_FLAG_NARROW_INSTR (1<<2)
+
+extern int kprobe_test_flags;
+extern int kprobe_test_cc_position;
+
+
+#define TEST_MEMORY_SIZE 256
+
+
+/*
+ * Test case structures.
+ *
+ * The arguments given to test cases can be one of three types.
+ *
+ * ARG_TYPE_REG
+ * Load a register with the given value.
+ *
+ * ARG_TYPE_PTR
+ * Load a register with a pointer into the stack buffer (SP + given value).
+ *
+ * ARG_TYPE_MEM
+ * Store the given value into the stack buffer at [SP+index].
+ *
+ */
+
+#define ARG_TYPE_END 0
+#define ARG_TYPE_REG 1
+#define ARG_TYPE_PTR 2
+#define ARG_TYPE_MEM 3
+
+#define ARG_FLAG_UNSUPPORTED 0x01
+#define ARG_FLAG_SUPPORTED 0x02
+#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */
+#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */
+
+struct test_arg {
+ u8 type; /* ARG_TYPE_x */
+ u8 _padding[7];
+};
+
+struct test_arg_regptr {
+ u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */
+ u8 reg;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_mem {
+ u8 type; /* ARG_TYPE_MEM */
+ u8 index;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_end {
+ u8 type; /* ARG_TYPE_END */
+ u8 flags; /* ARG_FLAG_x */
+ u16 code_offset;
+ u16 branch_offset;
+ u16 end_offset;
+};
+
+
+/*
+ * Building blocks for test cases.
+ *
+ * Each test case is wrapped between TESTCASE_START and TESTCASE_END.
+ *
+ * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
+ * used followed by a terminating TEST_ARG_END.
+ *
+ * After this, the instruction to be tested is defined with TEST_INSTRUCTION.
+ * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
+ *
+ * Some specific test cases may make use of other custom constructs.
+ */
+
+#if VERBOSE
+#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
+#else
+#define verbose(fmt, ...)
+#endif
+
+#define TEST_GROUP(title) \
+ verbose("\n"); \
+ verbose(title"\n"); \
+ verbose("---------------------------------------------------------\n");
+
+#define TESTCASE_START(title) \
+ __asm__ __volatile__ ( \
+ "bl __kprobes_test_case_start \n\t" \
+ /* don't use .asciz here as 'title' may be */ \
+ /* multiple strings to be concatenated. */ \
+ ".ascii "#title" \n\t" \
+ ".byte 0 \n\t" \
+ ".align 2 \n\t"
+
+#define TEST_ARG_REG(reg, val) \
+ ".byte "__stringify(ARG_TYPE_REG)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_PTR(reg, val) \
+ ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_MEM(index, val) \
+ ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \
+ ".byte "#index" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_END(flags) \
+ ".byte "__stringify(ARG_TYPE_END)" \n\t" \
+ ".byte "TEST_ISA flags" \n\t" \
+ ".short 50f-0f \n\t" \
+ ".short 2f-0f \n\t" \
+ ".short 99f-0f \n\t" \
+ ".code "TEST_ISA" \n\t" \
+ "0: \n\t"
+
+#define TEST_INSTRUCTION(instruction) \
+ "50: nop \n\t" \
+ "1: "instruction" \n\t" \
+ " nop \n\t"
+
+#define TEST_BRANCH_F(instruction, xtra_dist) \
+ TEST_INSTRUCTION(instruction) \
+ ".if "#xtra_dist" \n\t" \
+ " b 99f \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t"
+
+#define TEST_BRANCH_B(instruction, xtra_dist) \
+ " b 50f \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t" \
+ " b 99f \n\t" \
+ ".if "#xtra_dist" \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ TEST_INSTRUCTION(instruction)
+
+#define TESTCASE_END \
+ "2: \n\t" \
+ "99: \n\t" \
+ " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \
+ ".code "NORMAL_ISA" \n\t" \
+ : : \
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \
+ );
+
+
+/*
+ * Macros to define test cases.
+ *
+ * Those of the form TEST_{R,P,M}* can be used to define test cases
+ * which take combinations of the three basic types of arguments. E.g.
+ *
+ * TEST_R One register argument
+ * TEST_RR Two register arguments
+ * TEST_RPR A register, a pointer, then a register argument
+ *
+ * For testing instructions which may branch, there are macros TEST_BF_*
+ * and TEST_BB_* for branching forwards and backwards.
+ *
+ * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
+ * the just verify that a kprobe is or is not allowed on the given instruction.
+ */
+
+#define TEST(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_UNSUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_SUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg code2) \
+ TESTCASE_END
+
+#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_REG(reg4, val4) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TESTCASE_END
+
+#define TEST_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2) \
+ TESTCASE_END
+
+#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_PTR(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_BF_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2, 0) \
+ TESTCASE_END
+
+#define TEST_BF_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF(code) TEST_BF_X(code, 0)
+#define TEST_BB(code) TEST_BB_X(code, 0)
+
+#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
+#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
+
+#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
+ TESTCASE_END
+
+#define TEST_X(code, codex) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RX(code1, reg, val, code2, codex) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg) code2) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+
+/* Various values used in test cases... */
+#define N(val) (val ^ 0xffffffff)
+#define VAL1 0x12345678
+#define VAL2 N(VAL1)
+#define VAL3 0xa5f801
+#define VAL4 N(VAL3)
+#define VALM 0x456789ab
+#define VALR 0xdeaddead
+#define HH1 0x0123fecb
+#define HH2 0xa9874567
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+void kprobe_thumb16_test_cases(void);
+void kprobe_thumb32_test_cases(void);
+#else
+void kprobe_arm_test_cases(void);
+#endif
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 902ca59..8f96ec7 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -943,6 +944,9 @@
*/
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table);
+#endif
static void __kprobes
t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
@@ -1423,6 +1427,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table);
+#endif
static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
{
diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h
index a6aeda0..38945f7 100644
--- a/arch/arm/kernel/kprobes.h
+++ b/arch/arm/kernel/kprobes.h
@@ -413,6 +413,14 @@
DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
+#ifdef CONFIG_THUMB2_KERNEL
+extern const union decode_item kprobe_decode_thumb16_table[];
+extern const union decode_item kprobe_decode_thumb32_table[];
+#else
+extern const union decode_item kprobe_decode_arm_table[];
+#endif
+
+
int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
const union decode_item *table, bool thumb16);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 53c9c26..e6e5d7c 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -12,6 +12,7 @@
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
+#include <linux/bitmap.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -26,16 +27,8 @@
#include <asm/pmu.h>
#include <asm/stacktrace.h>
-static struct platform_device *pmu_device;
-
/*
- * Hardware lock to serialize accesses to PMU registers. Needed for the
- * read/modify/write sequences.
- */
-static DEFINE_RAW_SPINLOCK(pmu_lock);
-
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
* another platform that supports more, we need to increase this to be the
* largest of all platforms.
*
@@ -43,62 +36,24 @@
* cycle counter CCNT + 31 events counters CNT0..30.
* Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
*/
-#define ARMPMU_MAX_HWEVENTS 33
+#define ARMPMU_MAX_HWEVENTS 32
-/* The events for a given CPU. */
-struct cpu_hw_events {
- /*
- * The events that are active on the CPU for the given index. Index 0
- * is reserved.
- */
- struct perf_event *events[ARMPMU_MAX_HWEVENTS];
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
- /*
- * A 1 bit for an index indicates that the counter is being used for
- * an event. A 0 means that the counter can be used.
- */
- unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-
- /*
- * A 1 bit for an index indicates that the counter is actively being
- * used.
- */
- unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-};
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-struct arm_pmu {
- enum arm_perf_pmu_ids id;
- const char *name;
- irqreturn_t (*handle_irq)(int irq_num, void *dev);
- void (*enable)(struct hw_perf_event *evt, int idx);
- void (*disable)(struct hw_perf_event *evt, int idx);
- int (*get_event_idx)(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc);
- u32 (*read_counter)(int idx);
- void (*write_counter)(int idx, u32 val);
- void (*start)(void);
- void (*stop)(void);
- void (*reset)(void *);
- const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
- const unsigned (*event_map)[PERF_COUNT_HW_MAX];
- u32 raw_event_mask;
- int num_events;
- u64 max_period;
-};
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
/* Set at runtime when we know what CPU type we are. */
-static const struct arm_pmu *armpmu;
+static struct arm_pmu *cpu_pmu;
enum arm_perf_pmu_ids
armpmu_get_pmu_id(void)
{
int id = -ENODEV;
- if (armpmu != NULL)
- id = armpmu->id;
+ if (cpu_pmu != NULL)
+ id = cpu_pmu->id;
return id;
}
@@ -109,8 +64,8 @@
{
int max_events = 0;
- if (armpmu != NULL)
- max_events = armpmu->num_events;
+ if (cpu_pmu != NULL)
+ max_events = cpu_pmu->num_events;
return max_events;
}
@@ -130,7 +85,11 @@
#define CACHE_OP_UNSUPPORTED 0xFFFF
static int
-armpmu_map_cache_event(u64 config)
+armpmu_map_cache_event(const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u64 config)
{
unsigned int cache_type, cache_op, cache_result, ret;
@@ -146,7 +105,7 @@
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
- ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
+ ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
@@ -155,23 +114,46 @@
}
static int
-armpmu_map_event(u64 config)
+armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
- int mapping = (*armpmu->event_map)[config];
- return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+ int mapping = (*event_map)[config];
+ return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
}
static int
-armpmu_map_raw_event(u64 config)
+armpmu_map_raw_event(u32 raw_event_mask, u64 config)
{
- return (int)(config & armpmu->raw_event_mask);
+ return (int)(config & raw_event_mask);
}
-static int
+static int map_cpu_event(struct perf_event *event,
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+ const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u32 raw_event_mask)
+{
+ u64 config = event->attr.config;
+
+ switch (event->attr.type) {
+ case PERF_TYPE_HARDWARE:
+ return armpmu_map_event(event_map, config);
+ case PERF_TYPE_HW_CACHE:
+ return armpmu_map_cache_event(cache_map, config);
+ case PERF_TYPE_RAW:
+ return armpmu_map_raw_event(raw_event_mask, config);
+ }
+
+ return -ENOENT;
+}
+
+int
armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int ret = 0;
@@ -202,11 +184,12 @@
return ret;
}
-static u64
+u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
again:
@@ -246,11 +229,9 @@
static void
armpmu_stop(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to update the counter, so ignore
* PERF_EF_UPDATE, see comments in armpmu_start().
@@ -266,11 +247,9 @@
static void
armpmu_start(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to reprogram the period, so ignore
* PERF_EF_RELOAD, see the comment below.
@@ -293,16 +272,16 @@
static void
armpmu_del(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
WARN_ON(idx < 0);
- clear_bit(idx, cpuc->active_mask);
armpmu_stop(event, PERF_EF_UPDATE);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
+ hw_events->events[idx] = NULL;
+ clear_bit(idx, hw_events->used_mask);
perf_event_update_userpage(event);
}
@@ -310,7 +289,8 @@
static int
armpmu_add(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx;
int err = 0;
@@ -318,7 +298,7 @@
perf_pmu_disable(event->pmu);
/* If we don't have a space for the counter then finish early. */
- idx = armpmu->get_event_idx(cpuc, hwc);
+ idx = armpmu->get_event_idx(hw_events, hwc);
if (idx < 0) {
err = idx;
goto out;
@@ -330,8 +310,7 @@
*/
event->hw.idx = idx;
armpmu->disable(hwc, idx);
- cpuc->events[idx] = event;
- set_bit(idx, cpuc->active_mask);
+ hw_events->events[idx] = event;
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
@@ -345,25 +324,25 @@
return err;
}
-static struct pmu pmu;
-
static int
-validate_event(struct cpu_hw_events *cpuc,
+validate_event(struct pmu_hw_events *hw_events,
struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event fake_event = event->hw;
+ struct pmu *leader_pmu = event->group_leader->pmu;
- if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+ if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
- return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+ return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
}
static int
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
- struct cpu_hw_events fake_pmu;
+ struct pmu_hw_events fake_pmu;
memset(&fake_pmu, 0, sizeof(fake_pmu));
@@ -383,110 +362,119 @@
static irqreturn_t armpmu_platform_irq(int irq, void *dev)
{
- struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev);
+ struct arm_pmu *armpmu = (struct arm_pmu *) dev;
+ struct platform_device *plat_device = armpmu->plat_device;
+ struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
return plat->handle_irq(irq, dev, armpmu->handle_irq);
}
+static void
+armpmu_release_hardware(struct arm_pmu *armpmu)
+{
+ int i, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
+
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+ for (i = 0; i < irqs; ++i) {
+ if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
+ continue;
+ irq = platform_get_irq(pmu_device, i);
+ if (irq >= 0)
+ free_irq(irq, armpmu);
+ }
+
+ release_pmu(armpmu->type);
+}
+
static int
-armpmu_reserve_hardware(void)
+armpmu_reserve_hardware(struct arm_pmu *armpmu)
{
struct arm_pmu_platdata *plat;
irq_handler_t handle_irq;
- int i, err = -ENODEV, irq;
+ int i, err, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
- pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
- if (IS_ERR(pmu_device)) {
+ err = reserve_pmu(armpmu->type);
+ if (err) {
pr_warning("unable to reserve pmu\n");
- return PTR_ERR(pmu_device);
+ return err;
}
- init_pmu(ARM_PMU_DEVICE_CPU);
-
plat = dev_get_platdata(&pmu_device->dev);
if (plat && plat->handle_irq)
handle_irq = armpmu_platform_irq;
else
handle_irq = armpmu->handle_irq;
- if (pmu_device->num_resources < 1) {
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+ if (irqs < 1) {
pr_err("no irqs for PMUs defined\n");
return -ENODEV;
}
- for (i = 0; i < pmu_device->num_resources; ++i) {
+ for (i = 0; i < irqs; ++i) {
+ err = 0;
irq = platform_get_irq(pmu_device, i);
if (irq < 0)
continue;
+ /*
+ * If we have a single PMU interrupt that we can't shift,
+ * assume that we're running on a uniprocessor machine and
+ * continue. Otherwise, continue without this interrupt.
+ */
+ if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+ pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, i);
+ continue;
+ }
+
err = request_irq(irq, handle_irq,
IRQF_DISABLED | IRQF_NOBALANCING,
- "armpmu", NULL);
+ "arm-pmu", armpmu);
if (err) {
- pr_warning("unable to request IRQ%d for ARM perf "
- "counters\n", irq);
- break;
+ pr_err("unable to request IRQ%d for ARM PMU counters\n",
+ irq);
+ armpmu_release_hardware(armpmu);
+ return err;
}
+
+ cpumask_set_cpu(i, &armpmu->active_irqs);
}
- if (err) {
- for (i = i - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
- }
-
- return err;
+ return 0;
}
static void
-armpmu_release_hardware(void)
-{
- int i, irq;
-
- for (i = pmu_device->num_resources - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- armpmu->stop();
-
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
-}
-
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-
-static void
hw_perf_event_destroy(struct perf_event *event)
{
- if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
- armpmu_release_hardware();
- mutex_unlock(&pmu_reserve_mutex);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ atomic_t *active_events = &armpmu->active_events;
+ struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
+
+ if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
+ armpmu_release_hardware(armpmu);
+ mutex_unlock(pmu_reserve_mutex);
}
}
static int
+event_requires_mode_exclusion(struct perf_event_attr *attr)
+{
+ return attr->exclude_idle || attr->exclude_user ||
+ attr->exclude_kernel || attr->exclude_hv;
+}
+
+static int
__hw_perf_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int mapping, err;
- /* Decode the generic type into an ARM event identifier. */
- if (PERF_TYPE_HARDWARE == event->attr.type) {
- mapping = armpmu_map_event(event->attr.config);
- } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
- mapping = armpmu_map_cache_event(event->attr.config);
- } else if (PERF_TYPE_RAW == event->attr.type) {
- mapping = armpmu_map_raw_event(event->attr.config);
- } else {
- pr_debug("event type %x not supported\n", event->attr.type);
- return -EOPNOTSUPP;
- }
+ mapping = armpmu->map_event(event);
if (mapping < 0) {
pr_debug("event %x:%llx not supported\n", event->attr.type,
@@ -495,34 +483,31 @@
}
/*
- * Check whether we need to exclude the counter from certain modes.
- * The ARM performance counters are on all of the time so if someone
- * has asked us for some excludes then we have to fail.
+ * We don't assign an index until we actually place the event onto
+ * hardware. Use -1 to signify that we haven't decided where to put it
+ * yet. For SMP systems, each core has it's own PMU so we can't do any
+ * clever allocation or constraints checking at this point.
*/
- if (event->attr.exclude_kernel || event->attr.exclude_user ||
- event->attr.exclude_hv || event->attr.exclude_idle) {
+ hwc->idx = -1;
+ hwc->config_base = 0;
+ hwc->config = 0;
+ hwc->event_base = 0;
+
+ /*
+ * Check whether we need to exclude the counter from certain modes.
+ */
+ if ((!armpmu->set_event_filter ||
+ armpmu->set_event_filter(hwc, &event->attr)) &&
+ event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
return -EPERM;
}
/*
- * We don't assign an index until we actually place the event onto
- * hardware. Use -1 to signify that we haven't decided where to put it
- * yet. For SMP systems, each core has it's own PMU so we can't do any
- * clever allocation or constraints checking at this point.
+ * Store the event encoding into the config_base field.
*/
- hwc->idx = -1;
-
- /*
- * Store the event encoding into the config_base field. config and
- * event_base are unused as the only 2 things we need to know are
- * the event mapping and the counter to use. The counter to use is
- * also the indx and the config_base is the event type.
- */
- hwc->config_base = (unsigned long)mapping;
- hwc->config = 0;
- hwc->event_base = 0;
+ hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
hwc->sample_period = armpmu->max_period;
@@ -542,32 +527,23 @@
static int armpmu_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
int err = 0;
+ atomic_t *active_events = &armpmu->active_events;
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HARDWARE:
- case PERF_TYPE_HW_CACHE:
- break;
-
- default:
+ if (armpmu->map_event(event) == -ENOENT)
return -ENOENT;
- }
-
- if (!armpmu)
- return -ENODEV;
event->destroy = hw_perf_event_destroy;
- if (!atomic_inc_not_zero(&active_events)) {
- mutex_lock(&pmu_reserve_mutex);
- if (atomic_read(&active_events) == 0) {
- err = armpmu_reserve_hardware();
- }
+ if (!atomic_inc_not_zero(active_events)) {
+ mutex_lock(&armpmu->reserve_mutex);
+ if (atomic_read(active_events) == 0)
+ err = armpmu_reserve_hardware(armpmu);
if (!err)
- atomic_inc(&active_events);
- mutex_unlock(&pmu_reserve_mutex);
+ atomic_inc(active_events);
+ mutex_unlock(&armpmu->reserve_mutex);
}
if (err)
@@ -582,22 +558,9 @@
static void armpmu_enable(struct pmu *pmu)
{
- /* Enable all of the perf events on hardware. */
- int idx, enabled = 0;
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
- if (!armpmu)
- return;
-
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
-
- if (!event)
- continue;
-
- armpmu->enable(&event->hw, idx);
- enabled = 1;
- }
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+ int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
if (enabled)
armpmu->start();
@@ -605,20 +568,32 @@
static void armpmu_disable(struct pmu *pmu)
{
- if (armpmu)
- armpmu->stop();
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ armpmu->stop();
}
-static struct pmu pmu = {
- .pmu_enable = armpmu_enable,
- .pmu_disable = armpmu_disable,
- .event_init = armpmu_event_init,
- .add = armpmu_add,
- .del = armpmu_del,
- .start = armpmu_start,
- .stop = armpmu_stop,
- .read = armpmu_read,
-};
+static void __init armpmu_init(struct arm_pmu *armpmu)
+{
+ atomic_set(&armpmu->active_events, 0);
+ mutex_init(&armpmu->reserve_mutex);
+
+ armpmu->pmu = (struct pmu) {
+ .pmu_enable = armpmu_enable,
+ .pmu_disable = armpmu_disable,
+ .event_init = armpmu_event_init,
+ .add = armpmu_add,
+ .del = armpmu_del,
+ .start = armpmu_start,
+ .stop = armpmu_stop,
+ .read = armpmu_read,
+ };
+}
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+{
+ armpmu_init(armpmu);
+ return perf_pmu_register(&armpmu->pmu, name, type);
+}
/* Include the PMU-specific implementations. */
#include "perf_event_xscale.c"
@@ -630,14 +605,72 @@
* This requires SMP to be available, so exists as a separate initcall.
*/
static int __init
-armpmu_reset(void)
+cpu_pmu_reset(void)
{
- if (armpmu && armpmu->reset)
- return on_each_cpu(armpmu->reset, NULL, 1);
+ if (cpu_pmu && cpu_pmu->reset)
+ return on_each_cpu(cpu_pmu->reset, NULL, 1);
return 0;
}
-arch_initcall(armpmu_reset);
+arch_initcall(cpu_pmu_reset);
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id armpmu_of_device_ids[] = {
+ {.compatible = "arm,cortex-a9-pmu"},
+ {.compatible = "arm,cortex-a8-pmu"},
+ {.compatible = "arm,arm1136-pmu"},
+ {.compatible = "arm,arm1176-pmu"},
+ {},
+};
+
+static struct platform_device_id armpmu_plat_device_ids[] = {
+ {.name = "arm-pmu"},
+ {},
+};
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
+{
+ cpu_pmu->plat_device = pdev;
+ return 0;
+}
+
+static struct platform_driver armpmu_driver = {
+ .driver = {
+ .name = "arm-pmu",
+ .of_match_table = armpmu_of_device_ids,
+ },
+ .probe = armpmu_device_probe,
+ .id_table = armpmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+ return platform_driver_register(&armpmu_driver);
+}
+device_initcall(register_pmu_driver);
+
+static struct pmu_hw_events *armpmu_get_cpu_events(void)
+{
+ return &__get_cpu_var(cpu_hw_events);
+}
+
+static void __init cpu_pmu_init(struct arm_pmu *armpmu)
+{
+ int cpu;
+ for_each_possible_cpu(cpu) {
+ struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+ events->events = per_cpu(hw_events, cpu);
+ events->used_mask = per_cpu(used_mask, cpu);
+ raw_spin_lock_init(&events->pmu_lock);
+ }
+ armpmu->get_hw_events = armpmu_get_cpu_events;
+ armpmu->type = ARM_PMU_DEVICE_CPU;
+}
+
+/*
+ * CPU PMU identification and registration.
+ */
static int __init
init_hw_perf_events(void)
{
@@ -651,22 +684,22 @@
case 0xB360: /* ARM1136 */
case 0xB560: /* ARM1156 */
case 0xB760: /* ARM1176 */
- armpmu = armv6pmu_init();
+ cpu_pmu = armv6pmu_init();
break;
case 0xB020: /* ARM11mpcore */
- armpmu = armv6mpcore_pmu_init();
+ cpu_pmu = armv6mpcore_pmu_init();
break;
case 0xC080: /* Cortex-A8 */
- armpmu = armv7_a8_pmu_init();
+ cpu_pmu = armv7_a8_pmu_init();
break;
case 0xC090: /* Cortex-A9 */
- armpmu = armv7_a9_pmu_init();
+ cpu_pmu = armv7_a9_pmu_init();
break;
case 0xC050: /* Cortex-A5 */
- armpmu = armv7_a5_pmu_init();
+ cpu_pmu = armv7_a5_pmu_init();
break;
case 0xC0F0: /* Cortex-A15 */
- armpmu = armv7_a15_pmu_init();
+ cpu_pmu = armv7_a15_pmu_init();
break;
}
/* Intel CPUs [xscale]. */
@@ -674,23 +707,23 @@
part_number = (cpuid >> 13) & 0x7;
switch (part_number) {
case 1:
- armpmu = xscale1pmu_init();
+ cpu_pmu = xscale1pmu_init();
break;
case 2:
- armpmu = xscale2pmu_init();
+ cpu_pmu = xscale2pmu_init();
break;
}
}
- if (armpmu) {
+ if (cpu_pmu) {
pr_info("enabled with %s PMU driver, %d counters available\n",
- armpmu->name, armpmu->num_events);
+ cpu_pmu->name, cpu_pmu->num_events);
+ cpu_pmu_init(cpu_pmu);
+ armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");
}
- perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
-
return 0;
}
early_initcall(init_hw_perf_events);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index dd7f3b9..e63d811 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -54,7 +54,7 @@
};
enum armv6_counters {
- ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_CYCLE_COUNTER = 0,
ARMV6_COUNTER0,
ARMV6_COUNTER1,
};
@@ -433,6 +433,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = 0;
@@ -454,12 +455,29 @@
* Mask out the current event and set the counter to count the event
* that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static int counter_is_active(unsigned long pmcr, int idx)
+{
+ unsigned long mask = 0;
+ if (idx == ARMV6_CYCLE_COUNTER)
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ else if (idx == ARMV6_COUNTER0)
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ else if (idx == ARMV6_COUNTER1)
+ mask = ARMV6_PMCR_COUNT1_IEN;
+
+ if (mask)
+ return pmcr & mask;
+
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return 0;
}
static irqreturn_t
@@ -468,7 +486,7 @@
{
unsigned long pmcr = armv6_pmcr_read();
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -487,11 +505,11 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
+ if (!counter_is_active(pmcr, idx))
continue;
/*
@@ -508,7 +526,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -527,28 +545,30 @@
armv6pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val |= ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
armv6pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
/* Always place a cycle counter into the cycle counter. */
@@ -578,6 +598,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -598,12 +619,12 @@
* of ETM bus signal assertion cycles. The external reporting should
* be disabled and so this should never increment.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
@@ -611,6 +632,7 @@
int idx)
{
unsigned long val, mask, flags, evt = 0;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -627,15 +649,21 @@
* Unlike UP ARMv6, we don't have a way of stopping the counters. We
* simply disable the interrupt reporting.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static const struct arm_pmu armv6pmu = {
+static int armv6_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6_perf_map,
+ &armv6_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6pmu = {
.id = ARM_PERF_PMU_ID_V6,
.name = "v6",
.handle_irq = armv6pmu_handle_irq,
@@ -646,14 +674,12 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6_perf_cache_map,
- .event_map = &armv6_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return &armv6pmu;
}
@@ -665,7 +691,14 @@
* disable the interrupt reporting and update the event. When unthrottling we
* reset the period and enable the interrupt reporting.
*/
-static const struct arm_pmu armv6mpcore_pmu = {
+
+static int armv6mpcore_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6mpcore_perf_map,
+ &armv6mpcore_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6mpcore_pmu = {
.id = ARM_PERF_PMU_ID_V6MP,
.name = "v6mpcore",
.handle_irq = armv6pmu_handle_irq,
@@ -676,24 +709,22 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6mpcore_perf_cache_map,
- .event_map = &armv6mpcore_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6mpcore_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return &armv6mpcore_pmu;
}
#else
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 6be3e2e..1ef6d00 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -17,6 +17,9 @@
*/
#ifdef CONFIG_CPU_V7
+
+static struct arm_pmu armv7pmu;
+
/*
* Common ARMv7 event types
*
@@ -676,25 +679,26 @@
};
/*
- * Perf Events counters
+ * Perf Events' indices
*/
-enum armv7_counters {
- ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
- ARMV7_COUNTER0 = 2, /* First event counter */
-};
+#define ARMV7_IDX_CYCLE_COUNTER 0
+#define ARMV7_IDX_COUNTER0 1
+#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+#define ARMV7_MAX_COUNTERS 32
+#define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1)
/*
* ARMv7 low level PMNC access
*/
/*
+ * Perf Event to low level counters mapping
+ */
+#define ARMV7_IDX_TO_COUNTER(x) \
+ (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK)
+
+/*
* Per-CPU PMNC: config reg
*/
#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
@@ -708,103 +712,76 @@
#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
/*
- * Available counters
- */
-#define ARMV7_CNT0 0 /* First event counter */
-#define ARMV7_CCNT 31 /* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
-
-/*
* FLAG: counters overflow flag status reg
*/
-#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
-static inline unsigned long armv7_pmnc_read(void)
+/*
+ * PMXEVTYPER: Event selection reg
+ */
+#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */
+#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */
+
+/*
+ * Event filters for PMUv2
+ */
+#define ARMV7_EXCLUDE_PL1 (1 << 31)
+#define ARMV7_EXCLUDE_USER (1 << 30)
+#define ARMV7_INCLUDE_HYP (1 << 27)
+
+static inline u32 armv7_pmnc_read(void)
{
u32 val;
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
return val;
}
-static inline void armv7_pmnc_write(unsigned long val)
+static inline void armv7_pmnc_write(u32 val)
{
val &= ARMV7_PMNC_MASK;
isb();
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
}
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+static inline int armv7_pmnc_has_overflowed(u32 pmnc)
{
return pmnc & ARMV7_OVERFLOWED_MASK;
}
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum armv7_counters counter)
+static inline int armv7_pmnc_counter_valid(int idx)
+{
+ return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
{
int ret = 0;
+ u32 counter;
- if (counter == ARMV7_CYCLE_COUNTER)
- ret = pmnc & ARMV7_FLAG_C;
- else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
- ret = pmnc & ARMV7_FLAG_P(counter);
- else
+ if (!armv7_pmnc_counter_valid(idx)) {
pr_err("CPU%u checking wrong counter %d overflow status\n",
- smp_processor_id(), counter);
+ smp_processor_id(), idx);
+ } else {
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ ret = pmnc & BIT(counter);
+ }
return ret;
}
-static inline int armv7_pmnc_select_counter(unsigned int idx)
+static inline int armv7_pmnc_select_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
- pr_err("CPU%u selecting wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u selecting wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
isb();
return idx;
@@ -812,124 +789,95 @@
static inline u32 armv7pmu_read_counter(int idx)
{
- unsigned long value = 0;
+ u32 value = 0;
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mrc p15, 0, %0, c9, c13, 2"
- : "=r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u reading wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
return value;
}
static inline void armv7pmu_write_counter(int idx, u32 value)
{
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mcr p15, 0, %0, c9, c13, 2"
- : : "r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u writing wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
}
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
{
if (armv7_pmnc_select_counter(idx) == idx) {
- val &= ARMV7_EVTSEL_MASK;
+ val &= ARMV7_EVTYPE_MASK;
asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
}
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+static inline int armv7_pmnc_enable_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENS_C;
- else
- val = ARMV7_CNTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+static inline int armv7_pmnc_disable_counter(int idx)
{
- u32 val;
+ u32 counter;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENC_C;
- else
- val = ARMV7_CNTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+static inline int armv7_pmnc_enable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENS_C;
- else
- val = ARMV7_INTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+static inline int armv7_pmnc_disable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENC_C;
- else
- val = ARMV7_INTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
return idx;
}
@@ -973,14 +921,14 @@
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
printk(KERN_INFO "CCNT =0x%08x\n", val);
- for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
printk(KERN_INFO "CNT[%d] count =0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
}
}
#endif
@@ -988,12 +936,13 @@
static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Enable counter and interrupt, and set the counter to count
* the event that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1002,9 +951,10 @@
/*
* Set event (if destined for PMNx counters)
- * We don't need to set the event if it's a cycle count
+ * We only need to set the event for the cycle counter if we
+ * have the ability to perform event filtering.
*/
- if (idx != ARMV7_CYCLE_COUNTER)
+ if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER)
armv7_pmnc_write_evtsel(idx, hwc->config_base);
/*
@@ -1017,17 +967,18 @@
*/
armv7_pmnc_enable_counter(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Disable counter and interrupt
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1039,14 +990,14 @@
*/
armv7_pmnc_disable_intens(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
{
- unsigned long pmnc;
+ u32 pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -1069,13 +1020,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
@@ -1090,7 +1038,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -1108,61 +1056,114 @@
static void armv7pmu_start(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all counters */
armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_stop(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all counters */
armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx;
+ unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT;
/* Always place a cycle counter into the cycle counter. */
- if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
- if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ if (evtype == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask))
return -EAGAIN;
- return ARMV7_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * the events counters
- */
- for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
- if (!test_and_set_bit(idx, cpuc->used_mask))
- return idx;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
+ return ARMV7_IDX_CYCLE_COUNTER;
}
+
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+}
+
+/*
+ * Add an event filter to a given event. This will only work for PMUv2 PMUs.
+ */
+static int armv7pmu_set_event_filter(struct hw_perf_event *event,
+ struct perf_event_attr *attr)
+{
+ unsigned long config_base = 0;
+
+ if (attr->exclude_idle)
+ return -EPERM;
+ if (attr->exclude_user)
+ config_base |= ARMV7_EXCLUDE_USER;
+ if (attr->exclude_kernel)
+ config_base |= ARMV7_EXCLUDE_PL1;
+ if (!attr->exclude_hv)
+ config_base |= ARMV7_INCLUDE_HYP;
+
+ /*
+ * Install the filter into config_base as this is used to
+ * construct the event type.
+ */
+ event->config_base = config_base;
+
+ return 0;
}
static void armv7pmu_reset(void *info)
{
- u32 idx, nb_cnt = armpmu->num_events;
+ u32 idx, nb_cnt = cpu_pmu->num_events;
/* The counter and interrupt enable registers are unknown at reset. */
- for (idx = 1; idx < nb_cnt; ++idx)
+ for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
armv7pmu_disable_event(NULL, idx);
/* Initialize & Reset PMNC: C and P bits */
armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
}
+static int armv7_a8_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a8_perf_map,
+ &armv7_a8_perf_cache_map, 0xFF);
+}
+
+static int armv7_a9_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a9_perf_map,
+ &armv7_a9_perf_cache_map, 0xFF);
+}
+
+static int armv7_a5_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a5_perf_map,
+ &armv7_a5_perf_cache_map, 0xFF);
+}
+
+static int armv7_a15_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a15_perf_map,
+ &armv7_a15_perf_cache_map, 0xFF);
+}
+
static struct arm_pmu armv7pmu = {
.handle_irq = armv7pmu_handle_irq,
.enable = armv7pmu_enable_event,
@@ -1173,7 +1174,6 @@
.start = armv7pmu_start,
.stop = armv7pmu_stop,
.reset = armv7pmu_reset,
- .raw_event_mask = 0xFF,
.max_period = (1LLU << 32) - 1,
};
@@ -1188,62 +1188,59 @@
return nb_cnt + 1;
}
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
- armv7pmu.cache_map = &armv7_a8_perf_cache_map;
- armv7pmu.event_map = &armv7_a8_perf_map;
+ armv7pmu.map_event = armv7_a8_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
- armv7pmu.cache_map = &armv7_a9_perf_cache_map;
- armv7pmu.event_map = &armv7_a9_perf_map;
+ armv7pmu.map_event = armv7_a9_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA5;
armv7pmu.name = "ARMv7 Cortex-A5";
- armv7pmu.cache_map = &armv7_a5_perf_cache_map;
- armv7pmu.event_map = &armv7_a5_perf_map;
+ armv7pmu.map_event = armv7_a5_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA15;
armv7pmu.name = "ARMv7 Cortex-A15";
- armv7pmu.cache_map = &armv7_a15_perf_cache_map;
- armv7pmu.event_map = &armv7_a15_perf_map;
+ armv7pmu.map_event = armv7_a15_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
+ armv7pmu.set_event_filter = armv7pmu_set_event_filter;
return &armv7pmu;
}
#else
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3c43974..e0cca10 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -40,7 +40,7 @@
};
enum xscale_counters {
- XSCALE_CYCLE_COUNTER = 1,
+ XSCALE_CYCLE_COUNTER = 0,
XSCALE_COUNTER0,
XSCALE_COUNTER1,
XSCALE_COUNTER2,
@@ -222,7 +222,7 @@
{
unsigned long pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -249,13 +249,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -266,7 +263,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -284,6 +281,7 @@
xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -305,18 +303,19 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -336,16 +335,16 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
if (XSCALE_PERFCTR_CCNT == event->config_base) {
@@ -368,24 +367,26 @@
xscale1pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val |= XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -424,7 +425,13 @@
}
}
-static const struct arm_pmu xscale1pmu = {
+static int xscale_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &xscale_perf_map,
+ &xscale_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu xscale1pmu = {
.id = ARM_PERF_PMU_ID_XSCALE1,
.name = "xscale1",
.handle_irq = xscale1pmu_handle_irq,
@@ -435,14 +442,12 @@
.get_event_idx = xscale1pmu_get_event_idx,
.start = xscale1pmu_start,
.stop = xscale1pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return &xscale1pmu;
}
@@ -560,7 +565,7 @@
{
unsigned long pmnc, of_flags;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -581,13 +586,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -598,7 +600,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -616,6 +618,7 @@
xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -649,16 +652,17 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -692,14 +696,14 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx = xscale1pmu_get_event_idx(cpuc, event);
@@ -718,24 +722,26 @@
xscale2pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
val |= XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -786,7 +792,7 @@
}
}
-static const struct arm_pmu xscale2pmu = {
+static struct arm_pmu xscale2pmu = {
.id = ARM_PERF_PMU_ID_XSCALE2,
.name = "xscale2",
.handle_irq = xscale2pmu_handle_irq,
@@ -797,24 +803,22 @@
.get_event_idx = xscale2pmu_get_event_idx,
.start = xscale2pmu_start,
.stop = xscale2pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 5,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return &xscale2pmu;
}
#else
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index c53474f..2c3407e 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -10,192 +10,26 @@
*
*/
-#define pr_fmt(fmt) "PMU: " fmt
-
-#include <linux/cpumask.h>
#include <linux/err.h>
-#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
#include <asm/pmu.h>
-static volatile long pmu_lock;
+/*
+ * PMU locking to ensure mutual exclusion between different subsystems.
+ */
+static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
-
-static int __devinit pmu_register(struct platform_device *pdev,
- enum arm_pmu_type type)
-{
- if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
- pr_warning("received registration request for unknown "
- "PMU device type %d\n", type);
- return -EINVAL;
- }
-
- if (pmu_devices[type]) {
- pr_warning("rejecting duplicate registration of PMU device "
- "type %d.", type);
- return -ENOSPC;
- }
-
- pr_info("registered new PMU device of type %d\n", type);
- pmu_devices[type] = pdev;
- return 0;
-}
-
-#define OF_MATCH_PMU(_name, _type) { \
- .compatible = _name, \
- .data = (void *)_type, \
-}
-
-#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU)
-
-static struct of_device_id armpmu_of_device_ids[] = {
- OF_MATCH_CPU("arm,cortex-a9-pmu"),
- OF_MATCH_CPU("arm,cortex-a8-pmu"),
- OF_MATCH_CPU("arm,arm1136-pmu"),
- OF_MATCH_CPU("arm,arm1176-pmu"),
- {},
-};
-
-#define PLAT_MATCH_PMU(_name, _type) { \
- .name = _name, \
- .driver_data = _type, \
-}
-
-#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU)
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
- PLAT_MATCH_CPU("arm-pmu"),
- {},
-};
-
-enum arm_pmu_type armpmu_device_type(struct platform_device *pdev)
-{
- const struct of_device_id *of_id;
- const struct platform_device_id *pdev_id;
-
- /* provided by of_device_id table */
- if (pdev->dev.of_node) {
- of_id = of_match_device(armpmu_of_device_ids, &pdev->dev);
- BUG_ON(!of_id);
- return (enum arm_pmu_type)of_id->data;
- }
-
- /* Provided by platform_device_id table */
- pdev_id = platform_get_device_id(pdev);
- BUG_ON(!pdev_id);
- return pdev_id->driver_data;
-}
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
- return pmu_register(pdev, armpmu_device_type(pdev));
-}
-
-static struct platform_driver armpmu_driver = {
- .driver = {
- .name = "arm-pmu",
- .of_match_table = armpmu_of_device_ids,
- },
- .probe = armpmu_device_probe,
- .id_table = armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
- return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-struct platform_device *
+int
reserve_pmu(enum arm_pmu_type type)
{
- struct platform_device *pdev;
-
- if (test_and_set_bit_lock(type, &pmu_lock)) {
- pdev = ERR_PTR(-EBUSY);
- } else if (pmu_devices[type] == NULL) {
- clear_bit_unlock(type, &pmu_lock);
- pdev = ERR_PTR(-ENODEV);
- } else {
- pdev = pmu_devices[type];
- }
-
- return pdev;
+ return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
}
EXPORT_SYMBOL_GPL(reserve_pmu);
-int
+void
release_pmu(enum arm_pmu_type type)
{
- if (WARN_ON(!pmu_devices[type]))
- return -EINVAL;
- clear_bit_unlock(type, &pmu_lock);
- return 0;
+ clear_bit_unlock(type, pmu_lock);
}
-EXPORT_SYMBOL_GPL(release_pmu);
-
-static int
-set_irq_affinity(int irq,
- unsigned int cpu)
-{
-#ifdef CONFIG_SMP
- int err = irq_set_affinity(irq, cpumask_of(cpu));
- if (err)
- pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
- irq, cpu);
- return err;
-#else
- return -EINVAL;
-#endif
-}
-
-static int
-init_cpu_pmu(void)
-{
- int i, irqs, err = 0;
- struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
-
- if (!pdev)
- return -ENODEV;
-
- irqs = pdev->num_resources;
-
- /*
- * If we have a single PMU interrupt that we can't shift, assume that
- * we're running on a uniprocessor machine and continue.
- */
- if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
- return 0;
-
- for (i = 0; i < irqs; ++i) {
- err = set_irq_affinity(platform_get_irq(pdev, i), i);
- if (err)
- break;
- }
-
- return err;
-}
-
-int
-init_pmu(enum arm_pmu_type type)
-{
- int err = 0;
-
- switch (type) {
- case ARM_PMU_DEVICE_CPU:
- err = init_cpu_pmu();
- break;
- default:
- pr_warning("attempt to initialise PMU of unknown "
- "type %d\n", type);
- err = -EINVAL;
- }
-
- return err;
-}
-EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3fe93f7..bda0a21 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -849,25 +849,8 @@
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
- else if (mdesc->boot_params) {
-#ifdef CONFIG_MMU
- /*
- * We still are executing with a minimal MMU mapping created
- * with the presumption that the machine default for this
- * is located in the first MB of RAM. Anything else will
- * fault and silently hang the kernel at this point.
- */
- if (mdesc->boot_params < PHYS_OFFSET ||
- mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
- printk(KERN_WARNING
- "Default boot params at physical 0x%08lx out of reach\n",
- mdesc->boot_params);
- } else
-#endif
- {
- tags = phys_to_virt(mdesc->boot_params);
- }
- }
+ else if (mdesc->atag_offset)
+ tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
/*
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index dc902f2..020e99c 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -8,92 +8,61 @@
.text
/*
- * Save CPU state for a suspend
- * r1 = v:p offset
- * r2 = suspend function arg0
- * r3 = suspend function
+ * Save CPU state for a suspend. This saves the CPU general purpose
+ * registers, and allocates space on the kernel stack to save the CPU
+ * specific registers and some other data for resume.
+ * r0 = suspend function arg0
+ * r1 = suspend function
*/
ENTRY(__cpu_suspend)
stmfd sp!, {r4 - r11, lr}
#ifdef MULTI_CPU
ldr r10, =processor
- ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
- ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+ ldr r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
#else
- ldr r5, =cpu_suspend_size
- ldr ip, =cpu_do_resume
+ ldr r4, =cpu_suspend_size
#endif
- mov r6, sp @ current virtual SP
- sub sp, sp, r5 @ allocate CPU state on stack
- mov r0, sp @ save pointer to CPU save block
- add ip, ip, r1 @ convert resume fn to phys
- stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn
- ldr r5, =sleep_save_sp
- add r6, sp, r1 @ convert SP to phys
- stmfd sp!, {r2, r3} @ save suspend func arg and pointer
+ mov r5, sp @ current virtual SP
+ add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn
+ sub sp, sp, r4 @ allocate CPU state on stack
+ stmfd sp!, {r0, r1} @ save suspend func arg and pointer
+ add r0, sp, #8 @ save pointer to save block
+ mov r1, r4 @ size of save block
+ mov r2, r5 @ virtual SP
+ ldr r3, =sleep_save_sp
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
ALT_UP(mov lr, #0)
and lr, lr, #15
- str r6, [r5, lr, lsl #2] @ save phys SP
-#else
- str r6, [r5] @ save phys SP
+ add r3, r3, lr, lsl #2
#endif
-#ifdef MULTI_CPU
- mov lr, pc
- ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
-#else
- bl cpu_do_suspend
-#endif
-
- @ flush data cache
-#ifdef MULTI_CACHE
- ldr r10, =cpu_cache
- mov lr, pc
- ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
-#else
- bl __cpuc_flush_kern_all
-#endif
+ bl __cpu_suspend_save
adr lr, BSYM(cpu_suspend_abort)
ldmfd sp!, {r0, pc} @ call suspend fn
ENDPROC(__cpu_suspend)
.ltorg
cpu_suspend_abort:
- ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn
+ ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn
+ teq r0, #0
+ moveq r0, #1 @ force non-zero value
mov sp, r2
ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_suspend_abort)
/*
* r0 = control register value
- * r1 = v:p offset (preserved by cpu_do_resume)
- * r2 = phys page table base
- * r3 = L1 section flags
*/
-ENTRY(cpu_resume_mmu)
- adr r4, cpu_resume_turn_mmu_on
- mov r4, r4, lsr #20
- orr r3, r3, r4, lsl #20
- ldr r5, [r2, r4, lsl #2] @ save old mapping
- str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
- sub r2, r2, r1
- ldr r3, =cpu_resume_after_mmu
- bic r1, r0, #CR_C @ ensure D-cache is disabled
- b cpu_resume_turn_mmu_on
-ENDPROC(cpu_resume_mmu)
- .ltorg
.align 5
-cpu_resume_turn_mmu_on:
- mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
- mrc p15, 0, r1, c0, c0, 0 @ read id reg
- mov r1, r1
- mov r1, r1
+ENTRY(cpu_resume_mmu)
+ ldr r3, =cpu_resume_after_mmu
+ mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc
+ mrc p15, 0, r0, c0, c0, 0 @ read id reg
+ mov r0, r0
+ mov r0, r0
mov pc, r3 @ jump to virtual address
-ENDPROC(cpu_resume_turn_mmu_on)
+ENDPROC(cpu_resume_mmu)
cpu_resume_after_mmu:
- str r5, [r2, r4, lsl #2] @ restore old mapping
- mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
bl cpu_init @ restore the und/abt/irq banked regs
mov r0, #0 @ return zero on success
ldmfd sp!, {r4 - r11, pc}
@@ -119,7 +88,7 @@
ldr r0, sleep_save_sp @ stack phys addr
#endif
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
- @ load v:p, stack, resume fn
+ @ load phys pgd, stack, resume fn
ARM( ldmia r0!, {r1, sp, pc} )
THUMB( ldmia r0!, {r1, r2, r3} )
THUMB( mov sp, r2 )
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 94f34a6..ef5640b 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -460,10 +460,6 @@
for (i = 0; i < NR_IPI; i++)
sum += __get_irq_stat(cpu, ipi_irqs[i]);
-#ifdef CONFIG_LOCAL_TIMERS
- sum += __get_irq_stat(cpu, local_timer_irqs);
-#endif
-
return sum;
}
@@ -480,38 +476,6 @@
irq_exit();
}
-#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
-{
- handle_local_timer(regs);
-}
-
-void handle_local_timer(struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
- int cpu = smp_processor_id();
-
- if (local_timer_ack()) {
- __inc_irq_stat(cpu, local_timer_irqs);
- ipi_timer();
- }
-
- set_irq_regs(old_regs);
-}
-
-void show_local_irqs(struct seq_file *p, int prec)
-{
- unsigned int cpu;
-
- seq_printf(p, "%*s: ", prec, "LOC");
-
- for_each_present_cpu(cpu)
- seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
-
- seq_printf(p, " Local timer interrupts\n");
-}
-#endif
-
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
static void smp_timer_broadcast(const struct cpumask *mask)
{
@@ -562,7 +526,7 @@
unsigned int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ local_timer_stop(evt);
}
#endif
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 01c1862..a8a6682 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
#include <asm/hardware/gic.h>
/* set up by the platform code */
@@ -26,6 +27,8 @@
static unsigned long twd_timer_rate;
+static struct clock_event_device __percpu **twd_evt;
+
static void twd_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
@@ -80,6 +83,12 @@
return 0;
}
+void twd_timer_stop(struct clock_event_device *clk)
+{
+ twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+ disable_percpu_irq(clk->irq);
+}
+
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@@ -119,11 +128,43 @@
}
}
+static irqreturn_t twd_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+ if (twd_timer_ack()) {
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
/*
* Setup the local clock events for a CPU.
*/
void __cpuinit twd_timer_setup(struct clock_event_device *clk)
{
+ struct clock_event_device **this_cpu_clk;
+
+ if (!twd_evt) {
+ int err;
+
+ twd_evt = alloc_percpu(struct clock_event_device *);
+ if (!twd_evt) {
+ pr_err("twd: can't allocate memory\n");
+ return;
+ }
+
+ err = request_percpu_irq(clk->irq, twd_handler,
+ "twd", twd_evt);
+ if (err) {
+ pr_err("twd: can't register interrupt %d (%d)\n",
+ clk->irq, err);
+ return;
+ }
+ }
+
twd_calibrate_rate();
clk->name = "local_timer";
@@ -137,8 +178,10 @@
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+ this_cpu_clk = __this_cpu_ptr(twd_evt);
+ *this_cpu_clk = clk;
+
clockevents_register_device(clk);
- /* Make sure our local interrupt controller has this enabled */
- gic_enable_ppi(clk->irq);
+ enable_percpu_irq(clk->irq, 0);
}
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
new file mode 100644
index 0000000..93a22d2
--- /dev/null
+++ b/arch/arm/kernel/suspend.c
@@ -0,0 +1,72 @@
+#include <linux/init.h>
+
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/memory.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+
+static pgd_t *suspend_pgd;
+
+extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
+extern void cpu_resume_mmu(void);
+
+/*
+ * This is called by __cpu_suspend() to save the state, and do whatever
+ * flushing is required to ensure that when the CPU goes to sleep we have
+ * the necessary data available when the caches are not searched.
+ */
+void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
+{
+ *save_ptr = virt_to_phys(ptr);
+
+ /* This must correspond to the LDM in cpu_resume() assembly */
+ *ptr++ = virt_to_phys(suspend_pgd);
+ *ptr++ = sp;
+ *ptr++ = virt_to_phys(cpu_do_resume);
+
+ cpu_do_suspend(ptr);
+
+ flush_cache_all();
+ outer_clean_range(*save_ptr, *save_ptr + ptrsz);
+ outer_clean_range(virt_to_phys(save_ptr),
+ virt_to_phys(save_ptr) + sizeof(*save_ptr));
+}
+
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+ struct mm_struct *mm = current->active_mm;
+ int ret;
+
+ if (!suspend_pgd)
+ return -EINVAL;
+
+ /*
+ * Provide a temporary page table with an identity mapping for
+ * the MMU-enable code, required for resuming. On successful
+ * resume (indicated by a zero return code), we need to switch
+ * back to the correct page tables.
+ */
+ ret = __cpu_suspend(arg, fn);
+ if (ret == 0) {
+ cpu_switch_mm(mm->pgd, mm);
+ local_flush_tlb_all();
+ }
+
+ return ret;
+}
+
+static int __init cpu_suspend_init(void)
+{
+ suspend_pgd = pgd_alloc(&init_mm);
+ if (suspend_pgd) {
+ unsigned long addr = virt_to_phys(cpu_resume_mmu);
+ identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
+ }
+ return suspend_pgd ? 0 : -ENOMEM;
+}
+core_initcall(cpu_suspend_init);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2248467..a6b7991 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -182,6 +182,11 @@
help
Select this if you are using the eco920 board
+config MACH_RSI_EWS
+ bool "RSI Embedded Webserver"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
@@ -381,6 +386,14 @@
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
+
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
@@ -442,6 +455,17 @@
# ----------------------------------------------------------
+comment "Generic Board Type"
+
+config MACH_AT91SAM_DT
+ bool "Atmel AT91SAM Evaluation Kits with device-tree support"
+ select USE_OF
+ help
+ Select this if you want to experiment device-tree with
+ an Atmel Evaluation Kit.
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b..242174f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -36,12 +36,13 @@
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
obj-$(CONFIG_MACH_ECO920) += board-eco920.o
+obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
+obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
@@ -53,7 +54,7 @@
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
+obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
# AT91SAM9RL board-specific support
@@ -67,6 +68,7 @@
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
+obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
@@ -74,6 +76,9 @@
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
+# AT91SAM board with device-tree
+obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 9ab5a3e..8ddafad 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -16,3 +16,5 @@
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
+
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index bfc6844..ecdd54dd 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -219,6 +219,8 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index dba0d8d..a4401d6 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -16,6 +16,7 @@
#include <asm/mach/irq.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -23,7 +24,6 @@
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
#include <mach/at91cap9.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
@@ -80,6 +80,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index f73302d..713d3bd 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -193,6 +193,8 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 7227755..01d8bbd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -14,11 +14,11 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
@@ -60,9 +60,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91rm9200_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index cb397be..b84a9f6 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -199,6 +199,16 @@
CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 39f81f4..24b6f8c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -13,11 +13,11 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
@@ -61,9 +61,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
@@ -319,7 +327,7 @@
if (!data)
return;
- for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
if (data->slot[i].bus_width) {
/* input/irq */
if (data->slot[i].detect_pin) {
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 6c8e3b5..658a518 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -129,6 +129,20 @@
.type = CLK_TYPE_PERIPHERAL,
};
+/* HClocks */
+static struct clk hck0 = {
+ .name = "hck0",
+ .pmc_mask = AT91_PMC_HCK0,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 0,
+};
+static struct clk hck1 = {
+ .name = "hck1",
+ .pmc_mask = AT91_PMC_HCK1,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 1,
+};
+
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@@ -161,6 +175,7 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -199,20 +214,6 @@
.id = 3,
};
-/* HClocks */
-static struct clk hck0 = {
- .name = "hck0",
- .pmc_mask = AT91_PMC_HCK0,
- .type = CLK_TYPE_SYSTEM,
- .id = 0,
-};
-static struct clk hck1 = {
- .name = "hck1",
- .pmc_mask = AT91_PMC_HCK1,
- .type = CLK_TYPE_SYSTEM,
- .id = 1,
-};
-
static void __init at91sam9261_register_clocks(void)
{
int i;
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0f91792..3b70b389 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,6 +14,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -21,7 +22,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91sam9_smc.h>
@@ -64,9 +64,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91sam9261_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 044f3c9..f83fbb0 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -189,6 +189,8 @@
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index a050f41..3faa1fd 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -20,7 +21,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9263_matrix.h>
#include <mach/at91sam9_smc.h>
@@ -74,6 +74,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index e04c5fb..318b040 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/pm.h>
+#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -53,6 +54,11 @@
.pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk trng_clk = {
+ .name = "trng_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TRNG,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US0,
@@ -176,6 +182,7 @@
&pioB_clk,
&pioC_clk,
&pioDE_clk,
+ &trng_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
@@ -215,6 +222,15 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -319,6 +335,7 @@
static void __init at91sam9g45_map_io(void)
{
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
+ init_consistent_dma_size(SZ_4M);
}
static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 600bffb..000b5e1 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
@@ -21,7 +22,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
@@ -124,6 +124,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_ohci_data = *data;
platform_device_register(&at91_usbh_ohci_device);
}
@@ -1095,6 +1101,34 @@
/* --------------------------------------------------------------------
+ * TRNG
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
+static struct resource trng_resources[] = {
+ {
+ .start = AT91SAM9G45_BASE_TRNG,
+ .end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device at91sam9g45_trng_device = {
+ .name = "atmel-trng",
+ .id = -1,
+ .resource = trng_resources,
+ .num_resources = ARRAY_SIZE(trng_resources),
+};
+
+static void __init at91_add_device_trng(void)
+{
+ platform_device_register(&at91sam9g45_trng_device);
+}
+#else
+static void __init at91_add_device_trng(void) {}
+#endif
+
+/* --------------------------------------------------------------------
* Watchdog
* -------------------------------------------------------------------- */
@@ -1583,6 +1617,7 @@
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
+ at91_add_device_trng();
at91_add_device_watchdog();
at91_add_device_tc();
return 0;
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index aacb19d..305a851 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -10,6 +10,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -17,7 +18,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 5aa5885..367d5cd 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -34,7 +35,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index b0c796d..0487ea1 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -25,6 +25,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -43,7 +44,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index d1abd58..747b2ea 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 679b0b7..0626703 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <asm/mach/map.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c578c5d90..774c87f 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index f4da8a1..fc885a4 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -40,7 +41,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2d919f5..d35e65b 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -36,7 +37,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 17654d5..c393666 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 72b5567..586100e 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -20,6 +20,7 @@
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -35,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
new file mode 100644
index 0000000..0b7d327
--- /dev/null
+++ b/arch/arm/mach-at91/board-dt.c
@@ -0,0 +1,123 @@
+/*
+ * Setup code for AT91SAM Evaluation Kits with Device Tree support
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/system_rev.h>
+#include <mach/at91sam9_smc.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+static const struct of_device_id aic_of_match[] __initconst = {
+ { .compatible = "atmel,at91rm9200-aic", },
+ {},
+};
+
+static void __init at91_dt_init_irq(void)
+{
+ irq_domain_generate_simple(aic_of_match, 0xfffff000, 0);
+ at91_init_irq_default();
+}
+
+static void __init at91_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ /* NAND */
+ ek_add_device_nand();
+}
+
+static const char *at91_dt_board_compat[] __initdata = {
+ "atmel,at91sam9m10g45ek",
+ "calao,usb-a9g20",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
+ /* Maintainer: Atmel */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_dt_init_irq,
+ .init_machine = at91_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 01170a2..45db7a3 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7c0313c..2f9c16d2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 4a17089..3bae73e 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -34,7 +35,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 9dc8d49..15a3f1a 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91rm9200_mc.h>
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9bc6ab3..6094496 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -44,7 +45,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index b7b8390..0a8fe6a 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 81f9110..938cc39 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -40,7 +41,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 6f08faa..b4ac30e 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 85bcccd..99fd7f8 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
new file mode 100644
index 0000000..e927df0
--- /dev/null
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -0,0 +1,233 @@
+/*
+ * board-rsi-ews.c
+ *
+ * Copyright (C)
+ * 2005 SAN People,
+ * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include <linux/gpio.h>
+
+#include "generic.h"
+
+static void __init rsi_ews_init_early(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91_initialize(18432000);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ /* This one is for debugging */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ /* Dialin/-out modem interface */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ /* RS485 communication */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/*
+ * Ethernet
+ */
+static struct at91_eth_data rsi_ews_eth_data __initdata = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+/*
+ * USB Host
+ */
+static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
+ .ports = 1,
+};
+
+/*
+ * SD/MC
+ */
+static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PB29,
+};
+
+/*
+ * I2C
+ */
+static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+ {
+ I2C_BOARD_INFO("24c01", 0x50),
+ }
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led rsi_ews_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB6,
+ .active_low = 0,
+ },
+ {
+ .name = "led1",
+ .gpio = AT91_PIN_PB7,
+ .active_low = 0,
+ },
+ {
+ .name = "led2",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 0,
+ },
+ {
+ .name = "led3",
+ .gpio = AT91_PIN_PB9,
+ .active_low = 0,
+ },
+};
+
+/*
+ * DataFlash
+ */
+static struct spi_board_info rsi_ews_spi_devices[] = {
+ { /* DataFlash chip 1*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+ { /* DataFlash chip 2*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition rsiews_nor_partitions[] = {
+ {
+ .name = "boot",
+ .offset = 0,
+ .size = 3 * SZ_128K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M - (3 * SZ_128K)
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_8M
+ },
+ {
+ .name = "kernelupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 3 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "rootupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 9 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+};
+
+static struct physmap_flash_data rsiews_nor_data = {
+ .width = 2,
+ .parts = rsiews_nor_partitions,
+ .nr_parts = ARRAY_SIZE(rsiews_nor_partitions),
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE SZ_16M
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device rsiews_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rsiews_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+/*
+ * Init Func
+ */
+static void __init rsi_ews_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ /* Ethernet */
+ at91_add_device_eth(&rsi_ews_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&rsi_ews_usbh_data);
+ /* I2C */
+ at91_add_device_i2c(rsi_ews_i2c_devices,
+ ARRAY_SIZE(rsi_ews_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(rsi_ews_spi_devices,
+ ARRAY_SIZE(rsi_ews_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &rsi_ews_mmc_data);
+ /* NOR Flash */
+ platform_device_register(&rsiews_nor_flash);
+ /* LEDs */
+ at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
+}
+
+MACHINE_START(RSI_EWS, "RSI EWS")
+ /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = rsi_ews_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = rsi_ews_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 4d3a02f..2a21e79 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 8a50c3e..89c8b57 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 5096a0e..3741f43 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -45,7 +46,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ea8f185..a580dd4 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -44,7 +45,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 817f59d..8d77c2f 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -18,6 +18,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ad234cc..2d6203a 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -14,6 +14,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 4f14b54..39a28ef 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -8,6 +8,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -30,7 +31,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
deleted file mode 100644
index 8c4c1a0..0000000
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9260.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.000 MHz crystal */
- at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA31,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Uboot & Kernel",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * GPIO Buttons
- */
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 0,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
- /* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
deleted file mode 100644
index 25e7937..0000000
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9263.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.00 MHz crystal */
- at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PB11,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- }
-#endif
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Linux Kernel",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PA22,
- .enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9263, "CALAO USB_A9263")
- /* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
new file mode 100644
index 0000000..5852d3d
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -0,0 +1,383 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a926x.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2007 Calao-systems
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.00 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PB11,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+static void __init ek_add_device_udc(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_udc_data.vbus_pin = AT91_PIN_PC5;
+
+ at91_add_device_udc(&ek_udc_data);
+}
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
+static int at91_mmc_spi_init(struct device *dev,
+ irqreturn_t (*detect_int)(int, void *), void *data)
+{
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
+ return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-spi-detect", data);
+}
+
+static void at91_mmc_spi_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
+}
+
+static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
+ .init = at91_mmc_spi_init,
+ .exit = at91_mmc_spi_exit,
+ .detect_delay = 100, /* msecs */
+};
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info usb_a9263_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ }
+#endif
+};
+
+static struct spi_board_info usb_a9g20_spi_devices[] = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &at91_mmc_spi_pdata,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+static void __init ek_add_device_spi(void)
+{
+ if (machine_is_usb_a9263())
+ at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
+ else if (machine_is_usb_a9g20())
+ at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
+}
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
+ .is_rmii = 1,
+};
+
+static void __init ek_add_device_eth(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
+
+ at91_add_device_eth(&ek_macb_data);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "barebox",
+ .offset = 0,
+ .size = 3 * SZ_128K,
+ }, {
+ .name = "bareboxenv",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
+ .name = "bareboxenv2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 4 * SZ_1M,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PA22,
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+};
+
+static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
+ ek_nand_data.rdy_pin = AT91_PIN_PC13;
+ ek_nand_data.enable_pin = AT91_PIN_PC14;
+ }
+
+ /* configure chip-select 3 (NAND) */
+ if (machine_is_usb_a9g20())
+ sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+ else
+ sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* USER PUSH BUTTON */
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB10,
+ .active_low = 1,
+ .desc = "user_pb",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+ at91_set_deglitch(AT91_PIN_PB10, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* user_led (green) */
+ .name = "user_led",
+ .gpio = AT91_PIN_PB21,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rv3029c2", 0x56),
+ },
+};
+
+static void __init ek_add_device_leds(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_leds[0].active_low = 0;
+
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ ek_add_device_udc();
+ /* SPI */
+ ek_add_device_spi();
+ /* Ethernet */
+ ek_add_device_eth();
+ /* NAND */
+ ek_add_device_nand();
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ ek_add_device_leds();
+
+ if (machine_is_usb_a9g20()) {
+ /* I2C */
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ } else {
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* shutdown controller, wakeup button (5 msec low) */
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+ | AT91_SHDW_WKMODE0_LOW
+ | AT91_SHDW_RTTWKEN);
+ }
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+ /* Maintainer: calao-systems */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+ /* Maintainer: calao-systems */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
+ /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 95edcbd..3c288b3 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -43,7 +44,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 4615528..224e9e2 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -11,6 +11,7 @@
#include <linux/clk.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/debugfs.h>
@@ -22,9 +23,6 @@
#include <mach/hardware.h>
#include <mach/at91_pio.h>
-#include <mach/gpio.h>
-
-#include <asm/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c611b9..406bb64 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -128,8 +128,6 @@
#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
/*
* DMA peripheral identifiers
* for hardware handshaking interface
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index ed544a0..d07767f 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,11 @@
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
u8 vbus_pin[2]; /* port power-control pin */
+ u8 vbus_pin_inverted;
+ u8 overcurrent_supported;
+ u8 overcurrent_pin[2];
+ u8 overcurrent_status[2];
+ u8 overcurrent_changed[2];
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index bc1e0b2..0ed8648 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.endm
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 056dc66..2b9a1f51 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -214,11 +214,6 @@
*/
#include <asm/errno.h>
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(gpio) (gpio)
#define irq_to_gpio(irq) (irq)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..85820ad 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -64,7 +64,12 @@
#elif defined(CONFIG_ARCH_AT91SAM9G20)
+#if defined(CONFIG_MACH_USB_A9G20)
+#define AT91SAM9_MASTER_CLOCK 133000000
+#else
#define AT91SAM9_MASTER_CLOCK 132096000
+#endif
+
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0415a839..8dfafe7 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -9,13 +9,13 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
/* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4159eca..7046158 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -10,6 +10,7 @@
* (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/suspend.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
@@ -25,7 +26,6 @@
#include <asm/mach/irq.h>
#include <mach/at91_pmc.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
index ed78aab..6ae20a6 100644
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -22,7 +22,6 @@
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
-#include <mach/memory.h>
#include <cfg_global.h>
#include <mach/csp/mm_io.h>
@@ -31,7 +30,7 @@
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
-#define RAM_START PLAT_PHYS_OFFSET
+#define RAM_START PHYS_OFFSET
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
deleted file mode 100644
index 15162e4..0000000
--- a/arch/arm/mach-bcmring/include/mach/memory.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <cfg_global.h>
-
-/*
- * Physical vs virtual RAM address space conversion. These are
- * private definitions which should NOT be used outside memory.h
- * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-
-#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
-
-/*
- * Maximum DMA memory allowed is 14M
- */
-#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
-
-#endif
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 0f1c37e..8616876 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -13,6 +13,7 @@
*****************************************************************************/
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -53,4 +54,6 @@
{
iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+ /* Maximum DMA memory allowed is 14M */
+ init_consistent_dma_size(14 << 20);
}
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 4a74b2c9..0276091 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,7 +64,7 @@
MACHINE_START(AUTCPU12, "autronix autcpu12")
/* Maintainer: Thomas Gleixner */
- .boot_params = 0xc0020000,
+ .atag_offset = 0x20000,
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 5a1689d..25b3bfd 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,7 +55,7 @@
MACHINE_START(CDB89712, "Cirrus-CDB89712")
/* Maintainer: Ray Lehtiniemi */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 16481cf..1df9ec6 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,7 +56,7 @@
MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
/* Maintainer: Rob Scott */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 0a2e74f..80496c0 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -36,7 +36,7 @@
MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
/* Maintainer: Nobody */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x0100,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 725a7a5..9721f61 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -56,7 +56,7 @@
MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
/* Maintainer: Jon McClintock */
- .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */
+ .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */
.fixup = fixup_edb7211,
.map_io = edb7211_map_io,
.reserve = edb7211_reserve,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 1947b30..d992566 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -74,7 +74,6 @@
MACHINE_START(FORTUNET, "ARM-FortuNet")
/* Maintainer: FortuNet Inc. */
- .boot_params = 0x00000000,
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 507c687..b802e8a 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
#ifndef CONFIG_DEBUG_CLPS711X_UART2
mov \rp, #0x0000 @ UART1
#else
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 3f796e0..6ecea95f 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -88,7 +88,7 @@
MACHINE_START(P720T, "ARM-Prospector720T")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_p720t,
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 3e7d149..55f7b4b 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -197,7 +197,7 @@
}
MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.timer = &cns3xxx_timer,
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index 56d8286..d04c150 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart,rp,rv
+ .macro addruart,rp,rv,tmp
mov \rp, #0x00009000
orr \rv, \rp, #0xf0000000 @ virtual base
orr \rp, \rp, #0x10000000
diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h
deleted file mode 100644
index dc16c5c..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
-#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
-
-#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
-
-#endif
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c0deaca..32d837d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -192,6 +192,16 @@
endchoice
+config DA850_WL12XX
+ bool "AM18x wl1271 daughter board"
+ depends on MACH_DAVINCI_DA850_EVM
+ help
+ The wl1271 daughter card for AM18x EVMs is a combo wireless
+ connectivity add-on card, based on the LS Research TiWi module with
+ Texas Instruments' wl1271 solution.
+ Say Y if you want to use a wl1271 expansion card connected to the
+ AM18x EVM.
+
config GPIO_PCA953X
default MACH_DAVINCI_DA850_EVM
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1c..495e313 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
# Common objects
obj-y := time.o clock.o serial.o io.o psc.o \
- gpio.o dma.o usb.o common.o sram.o aemif.o
+ dma.o usb.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
@@ -17,7 +17,6 @@
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_AINTC) += irq.o
obj-$(CONFIG_CP_INTC) += cp_intc.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd786..26d94c0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -676,7 +676,7 @@
}
MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 008d514..ec21663 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -31,6 +31,8 @@
#include <linux/input/tps6507x-ts.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#include <linux/delay.h>
+#include <linux/wl12xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -49,6 +51,9 @@
#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
+#define DA850_WLAN_EN GPIO_TO_PIN(6, 9)
+#define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10)
+
#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
static struct mtd_partition da850evm_spiflash_part[] = {
@@ -1143,6 +1148,110 @@
static __init int da850_evm_init_cpufreq(void) { return 0; }
#endif
+#ifdef CONFIG_DA850_WL12XX
+
+static void wl12xx_set_power(int index, bool power_on)
+{
+ static bool power_state;
+
+ pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
+
+ if (power_on == power_state)
+ return;
+ power_state = power_on;
+
+ if (power_on) {
+ /* Power up sequence required for wl127x devices */
+ gpio_set_value(DA850_WLAN_EN, 1);
+ usleep_range(15000, 15000);
+ gpio_set_value(DA850_WLAN_EN, 0);
+ usleep_range(1000, 1000);
+ gpio_set_value(DA850_WLAN_EN, 1);
+ msleep(70);
+ } else {
+ gpio_set_value(DA850_WLAN_EN, 0);
+ }
+}
+
+static struct davinci_mmc_config da850_wl12xx_mmc_config = {
+ .set_power = wl12xx_set_power,
+ .wires = 4,
+ .max_freq = 25000000,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
+ MMC_CAP_POWER_OFF_CARD,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+static const short da850_wl12xx_pins[] __initconst = {
+ DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
+ DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
+ DA850_GPIO6_9, DA850_GPIO6_10,
+ -1
+};
+
+static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
+ .irq = -1,
+ .board_ref_clock = WL12XX_REFCLOCK_38,
+ .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
+};
+
+static __init int da850_wl12xx_init(void)
+{
+ int ret;
+
+ ret = davinci_cfg_reg_list(da850_wl12xx_pins);
+ if (ret) {
+ pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
+ goto exit;
+ }
+
+ ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
+ if (ret) {
+ pr_err("wl12xx/mmc registration failed: %d\n", ret);
+ goto exit;
+ }
+
+ ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
+ if (ret) {
+ pr_err("Could not request wl12xx enable gpio: %d\n", ret);
+ goto exit;
+ }
+
+ ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
+ if (ret) {
+ pr_err("Could not request wl12xx irq gpio: %d\n", ret);
+ goto free_wlan_en;
+ }
+
+ da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
+
+ ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
+ if (ret) {
+ pr_err("Could not set wl12xx data: %d\n", ret);
+ goto free_wlan_irq;
+ }
+
+ return 0;
+
+free_wlan_irq:
+ gpio_free(DA850_WLAN_IRQ);
+
+free_wlan_en:
+ gpio_free(DA850_WLAN_EN);
+
+exit:
+ return ret;
+}
+
+#else /* CONFIG_DA850_WL12XX */
+
+static __init int da850_wl12xx_init(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_DA850_WL12XX */
+
#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
static __init void da850_evm_init(void)
@@ -1197,6 +1306,11 @@
if (ret)
pr_warning("da850_evm_init: mmcsd0 registration failed:"
" %d\n", ret);
+
+ ret = da850_wl12xx_init();
+ if (ret)
+ pr_warning("da850_evm_init: wl12xx initialization"
+ " failed: %d\n", ret);
}
davinci_serial_init(&da850_evm_uart_config);
@@ -1291,7 +1405,7 @@
}
MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd..6556628 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,7 +351,7 @@
}
MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284c..b307470 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,7 +270,7 @@
}
MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9818f21..04c43ab 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -612,7 +612,7 @@
}
MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a1..a005e769 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -712,7 +712,7 @@
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 993a3146..337c45e 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -792,7 +792,7 @@
}
MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
@@ -801,7 +801,7 @@
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index c278226..6efc84cc 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -566,7 +566,7 @@
}
MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a800..38d6f64 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -272,7 +272,7 @@
MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a..c6701e4 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@
}
MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c..5dd4da9 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@
MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 7828920..90ee7b5 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -277,7 +277,7 @@
#endif
MACHINE_START(TNETV107X, "TNETV107X EVM")
- .boot_params = (TNETV107X_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = tnetv107x_init,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 1d25573..865ffe5 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/etherdevice.h>
#include <linux/davinci_emac.h>
+#include <linux/dma-mapping.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
@@ -86,6 +87,8 @@
iotable_init(davinci_soc_info.io_desc,
davinci_soc_info.io_desc_num);
+ init_consistent_dma_size(14 << 20);
+
/*
* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index bd59f31..0b314bf 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,7 +19,7 @@
#include <asm/proc-fns.h>
#include <mach/cpuidle.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
#define DAVINCI_CPUIDLE_MAX_STATES 2
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 2ed2f82..a6bf5dc 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,6 +8,7 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -19,7 +20,7 @@
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 935dbed..b047f87 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,6 +11,7 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
@@ -27,7 +28,7 @@
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
#include <mach/pm.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
@@ -535,6 +536,13 @@
MUX_CFG(DA850, MMCSD0_DAT_3, 10, 20, 15, 2, false)
MUX_CFG(DA850, MMCSD0_CLK, 10, 0, 15, 2, false)
MUX_CFG(DA850, MMCSD0_CMD, 10, 4, 15, 2, false)
+ /* MMC/SD1 function */
+ MUX_CFG(DA850, MMCSD1_DAT_0, 18, 8, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_DAT_1, 19, 16, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_DAT_2, 19, 12, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_DAT_3, 19, 8, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_CLK, 18, 12, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_CMD, 18, 16, 15, 2, false)
/* EMIF2.5/EMIFA function */
MUX_CFG(DA850, EMA_D_7, 9, 0, 15, 1, false)
MUX_CFG(DA850, EMA_D_6, 9, 4, 15, 1, false)
@@ -593,6 +601,8 @@
MUX_CFG(DA850, GPIO3_13, 7, 8, 15, 8, false)
MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false)
+ MUX_CFG(DA850, GPIO6_9, 13, 24, 15, 8, false)
+ MUX_CFG(DA850, GPIO6_10, 13, 20, 15, 8, false)
MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false)
MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false)
#endif
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2f7e719..68def71 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -136,6 +136,7 @@
.n_cc = 1,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
@@ -151,6 +152,7 @@
.n_cc = 1,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
},
{
.n_channel = 32,
@@ -160,6 +162,7 @@
.n_cc = 1,
.queue_tc_mapping = da850_queue_tc_mapping,
.queue_priority_mapping = da850_queue_priority_mapping,
+ .default_queue = EVENTQ_0,
},
};
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 6162cae..29b17f7 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -80,6 +80,7 @@
.n_cc = 1,
.queue_tc_mapping = edma_tc_mapping,
.queue_priority_mapping = edma_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a3a94e9..fe520d4 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,7 +13,6 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
@@ -30,6 +29,7 @@
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/spi.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
@@ -591,6 +591,7 @@
.n_cc = 1,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 4604e72..679e168 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,7 +17,6 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/mach/map.h>
@@ -34,7 +33,7 @@
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4c82c27..3470983 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,7 +12,6 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
@@ -26,6 +25,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
@@ -514,6 +514,7 @@
.n_cc = 1,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1802e71..0b68ed5 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,7 +13,6 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
@@ -27,6 +26,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
@@ -555,6 +555,7 @@
.n_cc = 1,
.queue_tc_mapping = dm646x_queue_tc_mapping,
.queue_priority_mapping = dm646x_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 6b96698..da90103 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -1435,12 +1435,11 @@
goto fail1;
}
- edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+ edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
if (!edma_cc[j]) {
status = -ENOMEM;
goto fail1;
}
- memset(edma_cc[j], 0, sizeof(struct edma));
edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
EDMA_MAX_DMACH);
@@ -1450,8 +1449,6 @@
EDMA_MAX_CC);
edma_cc[j]->default_queue = info[j]->default_queue;
- if (!edma_cc[j]->default_queue)
- edma_cc[j]->default_queue = EVENTQ_1;
dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
edmacc_regs_base[j]);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
deleted file mode 100644
index cafbe13..0000000
--- a/arch/arm/mach-davinci/gpio.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006-2007 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-
-#include <asm/mach/irq.h>
-
-struct davinci_gpio_regs {
- u32 dir;
- u32 out_data;
- u32 set_data;
- u32 clr_data;
- u32 in_data;
- u32 set_rising;
- u32 clr_rising;
- u32 set_falling;
- u32 clr_falling;
- u32 intstat;
-};
-
-#define chip2controller(chip) \
- container_of(chip, struct davinci_gpio_controller, chip)
-
-static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-static void __iomem *gpio_base;
-
-static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
-{
- void __iomem *ptr;
-
- if (gpio < 32 * 1)
- ptr = gpio_base + 0x10;
- else if (gpio < 32 * 2)
- ptr = gpio_base + 0x38;
- else if (gpio < 32 * 3)
- ptr = gpio_base + 0x60;
- else if (gpio < 32 * 4)
- ptr = gpio_base + 0x88;
- else if (gpio < 32 * 5)
- ptr = gpio_base + 0xb0;
- else
- ptr = NULL;
- return ptr;
-}
-
-static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
-{
- struct davinci_gpio_regs __iomem *g;
-
- g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
-
- return g;
-}
-
-static int __init davinci_gpio_irq_setup(void);
-
-/*--------------------------------------------------------------------------*/
-
-/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
-static inline int __davinci_direction(struct gpio_chip *chip,
- unsigned offset, bool out, int value)
-{
- struct davinci_gpio_controller *d = chip2controller(chip);
- struct davinci_gpio_regs __iomem *g = d->regs;
- unsigned long flags;
- u32 temp;
- u32 mask = 1 << offset;
-
- spin_lock_irqsave(&d->lock, flags);
- temp = __raw_readl(&g->dir);
- if (out) {
- temp &= ~mask;
- __raw_writel(mask, value ? &g->set_data : &g->clr_data);
- } else {
- temp |= mask;
- }
- __raw_writel(temp, &g->dir);
- spin_unlock_irqrestore(&d->lock, flags);
-
- return 0;
-}
-
-static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
-{
- return __davinci_direction(chip, offset, false, 0);
-}
-
-static int
-davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
-{
- return __davinci_direction(chip, offset, true, value);
-}
-
-/*
- * Read the pin's value (works even if it's set up as output);
- * returns zero/nonzero.
- *
- * Note that changes are synched to the GPIO clock, so reading values back
- * right after you've set them may give old values.
- */
-static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct davinci_gpio_controller *d = chip2controller(chip);
- struct davinci_gpio_regs __iomem *g = d->regs;
-
- return (1 << offset) & __raw_readl(&g->in_data);
-}
-
-/*
- * Assuming the pin is muxed as a gpio output, set its output value.
- */
-static void
-davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct davinci_gpio_controller *d = chip2controller(chip);
- struct davinci_gpio_regs __iomem *g = d->regs;
-
- __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
-}
-
-static int __init davinci_gpio_setup(void)
-{
- int i, base;
- unsigned ngpio;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct davinci_gpio_regs *regs;
-
- if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
- return 0;
-
- /*
- * The gpio banks conceptually expose a segmented bitmap,
- * and "ngpio" is one more than the largest zero-based
- * bit index that's valid.
- */
- ngpio = soc_info->gpio_num;
- if (ngpio == 0) {
- pr_err("GPIO setup: how many GPIOs?\n");
- return -EINVAL;
- }
-
- if (WARN_ON(DAVINCI_N_GPIO < ngpio))
- ngpio = DAVINCI_N_GPIO;
-
- gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
- if (WARN_ON(!gpio_base))
- return -ENOMEM;
-
- for (i = 0, base = 0; base < ngpio; i++, base += 32) {
- chips[i].chip.label = "DaVinci";
-
- chips[i].chip.direction_input = davinci_direction_in;
- chips[i].chip.get = davinci_gpio_get;
- chips[i].chip.direction_output = davinci_direction_out;
- chips[i].chip.set = davinci_gpio_set;
-
- chips[i].chip.base = base;
- chips[i].chip.ngpio = ngpio - base;
- if (chips[i].chip.ngpio > 32)
- chips[i].chip.ngpio = 32;
-
- spin_lock_init(&chips[i].lock);
-
- regs = gpio2regs(base);
- chips[i].regs = regs;
- chips[i].set_data = ®s->set_data;
- chips[i].clr_data = ®s->clr_data;
- chips[i].in_data = ®s->in_data;
-
- gpiochip_add(&chips[i].chip);
- }
-
- soc_info->gpio_ctlrs = chips;
- soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-
- davinci_gpio_irq_setup();
- return 0;
-}
-pure_initcall(davinci_gpio_setup);
-
-/*--------------------------------------------------------------------------*/
-/*
- * We expect irqs will normally be set up as input pins, but they can also be
- * used as output pins ... which is convenient for testing.
- *
- * NOTE: The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead.
- *
- * All those INTC hookups (direct, plus several IRQ banks) can also
- * serve as EDMA event triggers.
- */
-
-static void gpio_irq_disable(struct irq_data *d)
-{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
- __raw_writel(mask, &g->clr_falling);
- __raw_writel(mask, &g->clr_rising);
-}
-
-static void gpio_irq_enable(struct irq_data *d)
-{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
- unsigned status = irqd_get_trigger_type(d);
-
- status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
- if (!status)
- status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
-
- if (status & IRQ_TYPE_EDGE_FALLING)
- __raw_writel(mask, &g->set_falling);
- if (status & IRQ_TYPE_EDGE_RISING)
- __raw_writel(mask, &g->set_rising);
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned trigger)
-{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
- if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
- return -EINVAL;
-
- return 0;
-}
-
-static struct irq_chip gpio_irqchip = {
- .name = "GPIO",
- .irq_enable = gpio_irq_enable,
- .irq_disable = gpio_irq_disable,
- .irq_set_type = gpio_irq_type,
- .flags = IRQCHIP_SET_TYPE_MASKED,
-};
-
-static void
-gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
- struct davinci_gpio_regs __iomem *g;
- u32 mask = 0xffff;
- struct davinci_gpio_controller *d;
-
- d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
- g = (struct davinci_gpio_regs __iomem *)d->regs;
-
- /* we only care about one bank */
- if (irq & 1)
- mask <<= 16;
-
- /* temporarily mask (level sensitive) parent IRQ */
- desc->irq_data.chip->irq_mask(&desc->irq_data);
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- while (1) {
- u32 status;
- int n;
- int res;
-
- /* ack any irqs */
- status = __raw_readl(&g->intstat) & mask;
- if (!status)
- break;
- __raw_writel(status, &g->intstat);
-
- /* now demux them to the right lowlevel handler */
- n = d->irq_base;
- if (irq & 1) {
- n += 16;
- status >>= 16;
- }
-
- while (status) {
- res = ffs(status);
- n += res;
- generic_handle_irq(n - 1);
- status >>= res;
- }
- }
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
- /* now it may re-trigger */
-}
-
-static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
-{
- struct davinci_gpio_controller *d = chip2controller(chip);
-
- if (d->irq_base >= 0)
- return d->irq_base + offset;
- else
- return -ENODEV;
-}
-
-static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
-{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- /* NOTE: we assume for now that only irqs in the first gpio_chip
- * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
- */
- if (offset < soc_info->gpio_unbanked)
- return soc_info->gpio_irq + offset;
- else
- return -ENODEV;
-}
-
-static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
-{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
- if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
- return -EINVAL;
-
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
- ? &g->set_falling : &g->clr_falling);
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
- ? &g->set_rising : &g->clr_rising);
-
- return 0;
-}
-
-/*
- * NOTE: for suspend/resume, probably best to make a platform_device with
- * suspend_late/resume_resume calls hooking into results of the set_wake()
- * calls ... so if no gpios are wakeup events the clock can be disabled,
- * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * (dm6446) can be set appropriately for GPIOV33 pins.
- */
-
-static int __init davinci_gpio_irq_setup(void)
-{
- unsigned gpio, irq, bank;
- struct clk *clk;
- u32 binten = 0;
- unsigned ngpio, bank_irq;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct davinci_gpio_regs __iomem *g;
-
- ngpio = soc_info->gpio_num;
-
- bank_irq = soc_info->gpio_irq;
- if (bank_irq == 0) {
- printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
- return -EINVAL;
- }
-
- clk = clk_get(NULL, "gpio");
- if (IS_ERR(clk)) {
- printk(KERN_ERR "Error %ld getting gpio clock?\n",
- PTR_ERR(clk));
- return PTR_ERR(clk);
- }
- clk_enable(clk);
-
- /* Arrange gpio_to_irq() support, handling either direct IRQs or
- * banked IRQs. Having GPIOs in the first GPIO bank use direct
- * IRQs, while the others use banked IRQs, would need some setup
- * tweaks to recognize hardware which can do that.
- */
- for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
- chips[bank].chip.to_irq = gpio_to_irq_banked;
- chips[bank].irq_base = soc_info->gpio_unbanked
- ? -EINVAL
- : (soc_info->intc_irq_num + gpio);
- }
-
- /*
- * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
- * controller only handling trigger modes. We currently assume no
- * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
- */
- if (soc_info->gpio_unbanked) {
- static struct irq_chip gpio_irqchip_unbanked;
-
- /* pass "bank 0" GPIO IRQs to AINTC */
- chips[0].chip.to_irq = gpio_to_irq_unbanked;
- binten = BIT(0);
-
- /* AINTC handles mask/unmask; GPIO handles triggering */
- irq = bank_irq;
- gpio_irqchip_unbanked = *irq_get_chip(irq);
- gpio_irqchip_unbanked.name = "GPIO-AINTC";
- gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
-
- /* default trigger: both edges */
- g = gpio2regs(0);
- __raw_writel(~0, &g->set_falling);
- __raw_writel(~0, &g->set_rising);
-
- /* set the direct IRQs up to use that irqchip */
- for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
- irq_set_chip(irq, &gpio_irqchip_unbanked);
- irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
- irq_set_chip_data(irq, (__force void *)g);
- irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
- }
-
- goto done;
- }
-
- /*
- * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
- * then chain through our own handler.
- */
- for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
- gpio < ngpio;
- bank++, bank_irq++) {
- unsigned i;
-
- /* disabled by default, enabled only as needed */
- g = gpio2regs(gpio);
- __raw_writel(~0, &g->clr_falling);
- __raw_writel(~0, &g->clr_rising);
-
- /* set up all irqs in this bank */
- irq_set_chained_handler(bank_irq, gpio_irq_handler);
-
- /*
- * Each chip handles 32 gpios, and each irq bank consists of 16
- * gpio irqs. Pass the irq bank's corresponding controller to
- * the chained irq handler.
- */
- irq_set_handler_data(bank_irq, &chips[gpio / 32]);
-
- for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
- irq_set_chip(irq, &gpio_irqchip);
- irq_set_chip_data(irq, (__force void *)g);
- irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
- irq_set_handler(irq, handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- binten |= BIT(bank);
- }
-
-done:
- /* BINTEN -- per-bank interrupt enable. genirq would also let these
- * bits be set/cleared dynamically.
- */
- __raw_writel(binten, gpio_base + 0x08);
-
- printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
-
- return 0;
-}
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h
new file mode 100644
index 0000000..c19e047
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/ddr2.h
@@ -0,0 +1,4 @@
+#define DDR2_SDRCR_OFFSET 0xc
+#define DDR2_SRPD_BIT (1 << 23)
+#define DDR2_MCLKSTOPEN_BIT (1 << 30)
+#define DDR2_LPMODEN_BIT (1 << 31)
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f8b7ea4..cf94552 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -18,56 +18,50 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <mach/serial.h>
#define UART_SHIFT 2
-#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
.popsection
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use davinci_uart_phys/virt if already configured */
-10: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rp, =davinci_uart_phys
- add \rv, \rp, #4 @ davinci_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+10: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ davinci_uart_phys
+ ldr \rv, [\tmp, #4] @ davinci_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART address set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
+ and \rp, pc, #0xff000000
+ ldr \rv, =DAVINCI_UART_INFO_OFS
+ add \rp, \rp, \rv
/* Copy uart phys address from decompressor uart info */
- ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rv, =davinci_uart_phys
- ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
- ldr \rp, [\rp, #0]
- str \rp, [\rv]
+ ldr \rv, [\rp, #0]
+ str \rv, [\tmp, #0]
/* Copy uart virt address from decompressor uart info */
- ldreq \rv, =davinci_uart_v2p(davinci_uart_virt)
- ldrne \rv, =davinci_uart_virt
- ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
- ldr \rp, [\rp, #4]
- str \rp, [\rv]
+ ldr \rv, [\rp, #4]
+ str \rv, [\tmp, #4]
b 10b
-99:
+
+ .align
+99: .word .
+ .word davinci_uart_phys
+ .ltorg
+
+100:
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
new file mode 100644
index 0000000..1fdd1fd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
@@ -0,0 +1,91 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DAVINCI_DAVINCI_GPIO_H
+#define __DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+ GPIO_TYPE_DAVINCI = 0,
+ GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip. For now, they won't be usable as IRQ sources.
+ */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+ struct gpio_chip chip;
+ int irq_base;
+ spinlock_t lock;
+ void __iomem *regs;
+ void __iomem *set_data;
+ void __iomem *clr_data;
+ void __iomem *in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+ struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+ int index = gpio / 32;
+
+ if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+ return NULL;
+
+ return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+#endif /* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbece12..fbaae4772 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -13,80 +13,10 @@
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
#include <asm-generic/gpio.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
- GPIO_TYPE_DAVINCI = 0,
- GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code may write GPIO(N). These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip. For now, they won't be usable as IRQ sources.
- */
-#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
- struct gpio_chip chip;
- int irq_base;
- spinlock_t lock;
- void __iomem *regs;
- void __iomem *set_data;
- void __iomem *clr_data;
- void __iomem *in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
- struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
- int index = gpio / 32;
-
- if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
- return NULL;
-
- return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
- return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
/*
* The get/set/clear functions will inline when called with constant
@@ -147,11 +77,6 @@
return __gpio_cansleep(gpio);
}
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
/* don't support the reverse mapping */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
deleted file mode 100644
index 7873194..0000000
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * DaVinci memory space definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-#include <asm/page.h>
-#include <asm/sizes.h>
-
-/**************************************************************************
- * Definitions
- **************************************************************************/
-#define DAVINCI_DDR_BASE 0x80000000
-#define DA8XX_DDR_BASE 0xc0000000
-
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
-#else
-#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
-#endif
-
-#define DDR2_SDRCR_OFFSET 0xc
-#define DDR2_SRPD_BIT BIT(23)
-#define DDR2_MCLKSTOPEN_BIT BIT(30)
-#define DDR2_LPMODEN_BIT BIT(31)
-
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index d4f1e96..5ba6b22 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -12,6 +12,9 @@
/* get_cd()/get_wp() may sleep */
int (*get_cd)(int module);
int (*get_ro)(int module);
+
+ void (*set_power)(int module, bool on);
+
/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
u8 wires;
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 5d4e0fe..a7e92fc 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -857,6 +857,14 @@
DA850_MMCSD0_CLK,
DA850_MMCSD0_CMD,
+ /* MMC/SD1 function */
+ DA850_MMCSD1_DAT_0,
+ DA850_MMCSD1_DAT_1,
+ DA850_MMCSD1_DAT_2,
+ DA850_MMCSD1_DAT_3,
+ DA850_MMCSD1_CLK,
+ DA850_MMCSD1_CMD,
+
/* EMIF2.5/EMIFA function */
DA850_EMA_D_7,
DA850_EMA_D_6,
@@ -916,6 +924,8 @@
DA850_GPIO3_13,
DA850_GPIO4_0,
DA850_GPIO4_1,
+ DA850_GPIO6_9,
+ DA850_GPIO6_10,
DA850_GPIO6_13,
DA850_RTC_ALARM,
};
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index c9e6ce1..e347d88 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -21,8 +21,9 @@
* macros in debug-macro.S.
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
+ * We define it as a relative offset from start of usable RAM.
*/
-#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO_OFS 0x3ff8
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 78d8068..9dc7cf9 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,7 +43,12 @@
static inline void set_uart_info(u32 phys, void * __iomem virt)
{
- u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
uart = (u32 *)phys;
uart_info[0] = phys;
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 5f1e045..d4e9316e 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -22,7 +22,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/psc.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
#include "clock.h"
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 1b28fdd..409bb86 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -12,6 +12,7 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -27,9 +28,9 @@
#include <mach/psc.h>
#include <mach/cp_intc.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/hardware.h>
#include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 03e11f9..c8a406f 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -87,7 +87,7 @@
}
MACHINE_START(CM_A510, "Compulab CM-A510 Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = cm_a510_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 2ac34ec..11ea34e 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,7 +94,7 @@
}
MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index da8bf2b..5929cbc 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =DOVE_SB_REGS_PHYS_BASE
ldr \rv, =DOVE_SB_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
deleted file mode 100644
index bbc93fe..0000000
--- a/arch/arm/mach-dove/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 087bc77..d0ce8ab 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,7 +280,7 @@
MACHINE_START(EBSA110, "EBSA110")
/* Maintainer: Russell King */
- .boot_params = 0x00000400,
+ .atag_offset = 0x400,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
.soft_reboot = 1,
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 7ef5690..bb02c05 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
**/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xf0000000
orr \rp, \rp, #0x00000be0
mov \rp, \rv
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 3a08b18..97a2493 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -182,6 +182,13 @@
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
+config MACH_VISION_EP9307
+ bool "Support Vision Engraving Systems EP9307 SoM"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Vision Engraving Systems EP9307 SoM.
+
choice
prompt "Select a UART for early kernel messages"
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 3cedcf2..574209d9 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -15,3 +15,4 @@
obj-$(CONFIG_MACH_SIM_ONE) += simone.o
obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce..0713448 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@
MACHINE_START(ADSSPHERE, "ADS Sphere board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index c60f081..94c78bc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -38,6 +38,7 @@
#include <mach/fb.h>
#include <mach/ep93xx_keypad.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 9969bb1..70ef8c5 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -159,6 +160,11 @@
/*************************************************************************
* EDB93xx I2S
*************************************************************************/
+static struct platform_device edb93xx_audio_device = {
+ .name = "edb93xx-audio",
+ .id = -1,
+};
+
static int __init edb93xx_has_audio(void)
{
return (machine_is_edb9301() || machine_is_edb9302() ||
@@ -170,6 +176,7 @@
{
if (edb93xx_has_audio()) {
ep93xx_register_i2s();
+ platform_device_register(&edb93xx_audio_device);
}
}
@@ -240,7 +247,7 @@
#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -251,7 +258,7 @@
#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -262,7 +269,7 @@
#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -273,7 +280,7 @@
#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -284,7 +291,7 @@
#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -295,7 +302,7 @@
#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -306,7 +313,7 @@
#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -317,7 +324,7 @@
#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152..45ee205 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index b25bc907..af54e43 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/ep93xx-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base
ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base
orr \rp, \rp, #0x000c0000
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
new file mode 100644
index 0000000..8aff2ea
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
@@ -0,0 +1,100 @@
+/* Include file for the EP93XX GPIO controller machine specifics */
+
+#ifndef __GPIO_EP93XX_H
+#define __GPIO_EP93XX_H
+
+/* GPIO port A. */
+#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B. */
+#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C. */
+#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
+#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D. */
+#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
+#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E. */
+#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F. */
+#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
+#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G. */
+#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H. */
+#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
+#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
+
+#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index c57152c..40a8c178 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -1,120 +1 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gpio.h
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/* GPIO port A. */
-#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B. */
-#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C. */
-#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D. */
-#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
-#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E. */
-#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F. */
-#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
-#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G. */
-#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H. */
-#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
-#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/*
- * Map GPIO A0..A7 (0..7) to irq 64..71,
- * B0..B7 (7..15) to irq 72..79, and
- * F0..F7 (16..24) to irq 80..87.
- */
-#define gpio_to_irq(gpio) \
- (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
-
-#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
-
-#endif
+/* empty */
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea62..e72f736 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@
#ifdef CONFIG_MACH_MICRO9H
MACHINE_START(MICRO9, "Contec Micro9-High")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -88,7 +88,7 @@
#ifdef CONFIG_MACH_MICRO9M
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -99,7 +99,7 @@
#ifdef CONFIG_MACH_MICRO9L
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -110,7 +110,7 @@
#ifdef CONFIG_MACH_MICRO9S
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 8392e95..52e090d 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,12 +18,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -53,6 +53,17 @@
},
};
+static struct platform_device simone_audio_device = {
+ .name = "simone-audio",
+ .id = -1,
+};
+
+static void __init simone_register_audio(void)
+{
+ ep93xx_register_ac97();
+ platform_device_register(&simone_audio_device);
+}
+
static void __init simone_init_machine(void)
{
ep93xx_init_devices();
@@ -61,12 +72,12 @@
ep93xx_register_fb(&simone_fb_info);
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
ARRAY_SIZE(simone_i2c_board_info));
- ep93xx_register_ac97();
+ simone_register_audio();
}
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ /* Maintainer: Ryan Mallon */
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 2e9c614..8121e3a 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/fb.h>
@@ -30,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -150,6 +150,17 @@
.bpp = 16,
};
+static struct platform_device snappercl15_audio_device = {
+ .name = "snappercl15-audio",
+ .id = -1,
+};
+
+static void __init snappercl15_register_audio(void)
+{
+ ep93xx_register_i2s();
+ platform_device_register(&snappercl15_audio_device);
+}
+
static void __init snappercl15_init_machine(void)
{
ep93xx_init_devices();
@@ -157,13 +168,13 @@
ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
ARRAY_SIZE(snappercl15_i2c_data));
ep93xx_register_fb(&snappercl15_fb_info);
- ep93xx_register_i2s();
+ snappercl15_register_audio();
platform_device_register(&snappercl15_nand_device);
}
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf40..1ade3c3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 0000000..d96e4db
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE 0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+ {
+ .virtual = VISION_VIRT_BASE,
+ .pfn = __phys_to_pfn(VISION_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init vision_map_io(void)
+{
+ ep93xx_map_io();
+
+ iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+ .phy_id = 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+ int err;
+
+ err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+ EP93XX_SYSCON_DEVCFG_RASONP3 |
+ EP93XX_SYSCON_DEVCFG_EXVC);
+
+ return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+ gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+ if (blank_mode)
+ gpio_set_value(VISION_LCD_ENABLE, 0);
+ else
+ gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+ .setup = vision_lcd_setup,
+ .teardown = vision_lcd_teardown,
+ .blank = vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+ .gpio_base = PCA9539_74_GPIO_BASE,
+ .irq_base = EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+ .gpio_base = PCA9539_75_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+ .gpio_base = PCA9539_76_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+ .gpio_base = PCA9539_77_GPIO_BASE,
+ .irq_base = -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+};
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ .irq = IRQ_EP93XX_EXT1,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x74),
+ .platform_data = &pca953x_74_gpio_data,
+ .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x75),
+ .platform_data = &pca953x_75_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x76),
+ .platform_data = &pca953x_76_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x77),
+ .platform_data = &pca953x_77_gpio_data,
+ },
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7
+
+static struct mtd_partition vision_spi_flash_partitions[] = {
+ {
+ .name = "SPI bootstrap",
+ .offset = 0,
+ .size = SZ_4K,
+ }, {
+ .name = "Bootstrap config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4K,
+ }, {
+ .name = "System config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+ .name = "SPI Flash",
+ .parts = vision_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+static int vision_spi_flash_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_FLASH_CS);
+}
+
+static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_FLASH_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
+ .setup = vision_spi_flash_hw_setup,
+ .cleanup = vision_spi_flash_hw_cleanup,
+ .cs_control = vision_spi_flash_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2)
+#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0)
+#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15
+
+static struct gpio vision_spi_mmc_gpios[] = {
+ { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
+ { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
+};
+
+static int vision_spi_mmc_init(struct device *pdev,
+ irqreturn_t (*func)(int, void *), void *pdata)
+{
+ int err;
+
+ err = gpio_request_array(vision_spi_mmc_gpios,
+ ARRAY_SIZE(vision_spi_mmc_gpios));
+ if (err)
+ return err;
+
+ err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
+ if (err)
+ goto exit_err;
+
+ err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
+ IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
+ if (err)
+ goto exit_err;
+
+ return 0;
+
+exit_err:
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+ return err;
+
+}
+
+static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
+{
+ free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+}
+
+static int vision_spi_mmc_get_ro(struct device *pdev)
+{
+ return !!gpio_get_value(VISION_SPI_MMC_WP);
+}
+
+static int vision_spi_mmc_get_cd(struct device *pdev)
+{
+ return !gpio_get_value(VISION_SPI_MMC_CD);
+}
+
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+ .init = vision_spi_mmc_init,
+ .exit = vision_spi_mmc_exit,
+ .get_ro = vision_spi_mmc_get_ro,
+ .get_cd = vision_spi_mmc_get_cd,
+ .detect_delay = 100,
+ .powerup_msecs = 100,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static int vision_spi_mmc_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_MMC_CS);
+}
+
+static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_MMC_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
+ .setup = vision_spi_mmc_hw_setup,
+ .cleanup = vision_spi_mmc_hw_cleanup,
+ .cs_control = vision_spi_mmc_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+ {
+ .modalias = "sst25l",
+ .platform_data = &vision_spi_flash_data,
+ .controller_data = &vision_spi_flash_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ }, {
+ .modalias = "mmc_spi",
+ .platform_data = &vision_spi_mmc_data,
+ .controller_data = &vision_spi_mmc_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+ .num_chipselect = ARRAY_SIZE(vision_spi_board_info),
+};
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+ ep93xx_register_eth(&vision_eth_data, 1);
+ ep93xx_register_fb(&ep93xxfb_info);
+ ep93xx_register_pwm(1, 0);
+
+ /*
+ * Request the gpio expander's interrupt gpio line now to prevent
+ * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+ */
+ if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+ "pca9539:74"))
+ pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+ ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+ ARRAY_SIZE(vision_i2c_info));
+ ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+ ARRAY_SIZE(vision_spi_board_info));
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .atag_offset = 0x100,
+ .map_io = vision_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = vision_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index fc1f92d..a652735 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -16,6 +16,16 @@
help
Enable EXYNOS4210 CPU support
+config SOC_EXYNOS4212
+ bool
+ help
+ Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+ bool
+ help
+ Enable EXYNOS4412 SoC support
+
config EXYNOS4_MCT
bool
default y
@@ -112,24 +122,11 @@
menu "EXYNOS4 Machines"
+comment "EXYNOS4210 Boards"
+
config MACH_SMDKC210
bool "SMDKC210"
- select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS4_DEV_PD
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_SDHCI
+ select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
@@ -219,6 +216,48 @@
help
Machine support for Samsung Mobile NURI Board.
+config MACH_ORIGEN
+ bool "ORIGEN"
+ select CPU_EXYNOS4210
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC2
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+ bool "SMDK4212"
+ select SOC_EXYNOS4212
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C7
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+ bool "SMDK4412"
+ select SOC_EXYNOS4412
+ select MACH_SMDK4212
+ help
+ Machine support for Samsung SMDK4412
+
endmenu
comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7..c9b2e1f 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -12,8 +12,10 @@
# Core support for EXYNOS4 system
-obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
@@ -25,11 +27,15 @@
# machine support
-obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_MACH_NURI) += mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
# device support
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
new file mode 100644
index 0000000..b9d5ef6
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKSRC_LCD1),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_LCD1),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+ /* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_sata",
+ .id = -1,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clksrc_mask_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ },
+};
+
+static struct clk init_clocks_off[] = {
+ {
+ .name = "sataphy",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "sata",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+ return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+ .suspend = exynos4210_clock_suspend,
+ .resume = exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+ int ptr;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+ clk_mout_mpll.reg_src.shift = 8;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4210_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
new file mode 100644
index 0000000..77d5dec
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+ .sources = clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &clk_src_mpll_user,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+ /* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+ /* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+ return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+ .suspend = exynos4212_clock_suspend,
+ .resume = exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+ int ptr;
+
+ /* usbphy1 is removed */
+ clkset_group_list[4] = NULL;
+
+ /* mout_mpll_user is used */
+ clkset_group_list[6] = &clk_mout_mpll_user.clk;
+ clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+ clk_mout_mpll.reg_src.shift = 12;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4212_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 86964d2..0d59be3 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
@@ -20,26 +21,93 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/sysmmu.h>
+#include <mach/exynos4-clock.h>
-static struct clk clk_sclk_hdmi27m = {
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKSRC_TOP0),
+ SAVE_ITEM(S5P_CLKSRC_TOP1),
+ SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
+ SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
+ SAVE_ITEM(S5P_CLKSRC_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_CAM),
+ SAVE_ITEM(S5P_CLKDIV_TV),
+ SAVE_ITEM(S5P_CLKDIV_MFC),
+ SAVE_ITEM(S5P_CLKDIV_G3D),
+ SAVE_ITEM(S5P_CLKDIV_LCD0),
+ SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+ SAVE_ITEM(S5P_CLKDIV_FSYS0),
+ SAVE_ITEM(S5P_CLKDIV_FSYS1),
+ SAVE_ITEM(S5P_CLKDIV_FSYS2),
+ SAVE_ITEM(S5P_CLKDIV_FSYS3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL0),
+ SAVE_ITEM(S5P_CLKDIV_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_PERIL2),
+ SAVE_ITEM(S5P_CLKDIV_PERIL3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL4),
+ SAVE_ITEM(S5P_CLKDIV_PERIL5),
+ SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_TV),
+ SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+ SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+ SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+ SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+ SAVE_ITEM(S5P_CLKSRC_DMC),
+ SAVE_ITEM(S5P_CLKDIV_DMC0),
+ SAVE_ITEM(S5P_CLKDIV_DMC1),
+ SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+ SAVE_ITEM(S5P_CLKSRC_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+ SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
};
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
.name = "sclk_hdmiphy",
};
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
.name = "sclk_usbphy0",
.rate = 27000000,
};
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
@@ -58,12 +126,7 @@
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
}
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
}
@@ -103,12 +166,12 @@
return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
}
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
}
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
}
@@ -133,7 +196,7 @@
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
};
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
.clk = {
.name = "sclk_apll",
.parent = &clk_mout_apll.clk,
@@ -141,7 +204,7 @@
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
};
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
},
@@ -149,12 +212,13 @@
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
};
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+ /* reg_src will be added in each SoCs' clock */
};
static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +288,12 @@
/* Core list of CMU_CORE side */
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
.sources = clkset_corebus_list,
.nr_sources = ARRAY_SIZE(clkset_corebus_list),
};
@@ -284,12 +348,12 @@
/* Core list of CMU_TOP side */
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
@@ -321,7 +385,7 @@
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
},
@@ -360,7 +424,7 @@
.nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
};
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
.clk = {
.name = "sclk_vpll",
},
@@ -410,16 +474,6 @@
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sataphy",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.parent = &clk_aclk_133.clk,
@@ -449,11 +503,6 @@
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "sata",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
.name = "pdma",
.devname = "s3c-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
@@ -673,7 +722,7 @@
}
};
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
@@ -685,7 +734,7 @@
[8] = &clk_sclk_vpll.clk,
};
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
.sources = clkset_group_list,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
@@ -967,25 +1016,6 @@
.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.enable = exynos4_clksrc_mask_peril1_ctrl,
@@ -1114,7 +1144,13 @@
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
{
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+ else
+ return 0;
}
static struct clk_ops exynos4_fout_apll_ops = {
@@ -1124,10 +1160,10 @@
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
@@ -1151,14 +1187,29 @@
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
@@ -1193,6 +1244,28 @@
/* Nothing here yet */
};
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
void __init exynos4_register_clocks(void)
{
int ptr;
@@ -1208,5 +1281,6 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ register_syscore_ops(&exynos4_clock_syscore_ops);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 746d6fc..a348434 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -32,6 +32,8 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
+unsigned int gic_bank_offset __read_mostly;
+
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -44,11 +46,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -121,6 +118,24 @@
},
};
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
static void exynos4_idle(void)
{
if (!need_resched())
@@ -143,6 +158,11 @@
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
@@ -170,24 +190,37 @@
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
exynos4_register_clocks();
exynos4_setup_clocks();
}
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
gic_data->cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
+
+ gic_data->dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
}
void __init exynos4_init_irq(void)
{
int irq;
- gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
@@ -223,7 +256,11 @@
{
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
/* L2X0 Prefetch Control */
__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c
index 7490789..da70e7e 100644
--- a/arch/arm/mach-exynos4/hotplug.c
+++ b/arch/arm/mach-exynos4/hotplug.c
@@ -75,7 +75,7 @@
:
: "memory", "cc");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S
index a442ef8..6cacf16 100644
--- a/arch/arm/mach-exynos4/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d7a1e28..f5e9fd8 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -17,12 +17,25 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
+ mov \tmp, #0
+
+ mrc p15, 0, \base, c0, c0, 5
+ and \base, \base, #3
+ cmp \base, #0
+ beq 1f
+
+ ldr \tmp, =gic_bank_offset
+ ldr \tmp, [\tmp]
+ cmp \base, #1
+ beq 1f
+
+ cmp \base, #2
+ addeq \tmp, \tmp, \tmp
+ addne \tmp, \tmp, \tmp, LSL #1
+
+1: ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
- mrc p15, 0, \tmp, c0, c0, 5
- and \tmp, \tmp, #3
- cmp \tmp, #1
- addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+ add \base, \base, \tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -55,7 +68,7 @@
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -76,8 +89,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
new file mode 100644
index 0000000..a07fcbf
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h
index be9266b..80523ca 100644
--- a/arch/arm/mach-exynos4/include/mach/gpio.h
+++ b/arch/arm/mach-exynos4/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
/* GPIO bank sizes */
@@ -151,6 +146,4 @@
#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8..2d3f6bc 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,6 +19,8 @@
#define IRQ_PPI(x) S5P_IRQ(x+16)
+#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+
/* SPI: Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296d..9f97eb8 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
#include <plat/map-s5p.h>
-#define EXYNOS4_PA_SYSRAM 0x02020000
+#define EXYNOS4_PA_SYSRAM0 0x02025000
+#define EXYNOS4_PA_SYSRAM1 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
@@ -61,7 +62,6 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET 0x8000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index d493fdb..6c37ebe 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+#include <plat/cpu.h>
#include <mach/map.h>
#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
+#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
-#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
-
#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
@@ -85,13 +83,20 @@
#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C930) : \
+ S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C960) : \
+ S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
@@ -102,11 +107,17 @@
#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14004) : \
+ S5P_CLKREG(0x10008))
#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0 S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14108) : \
+ S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x1410C) : \
+ S5P_CLKREG(0x1010C))
#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
@@ -183,6 +194,13 @@
#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
index ca9c843..80dd02a 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -31,8 +31,9 @@
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c62..f0ca6c1 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -207,7 +207,7 @@
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b..6e05368 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -1152,7 +1152,7 @@
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644
index 0000000..b5f6f38
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ * http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = EXYNOS4_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+ platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+ /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = origen_map_io,
+ .init_machine = origen_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c
new file mode 100644
index 0000000..fcf2e0e
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4x12.c
@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+ REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+ REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+ REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_SMDK4X12",
+ .min_uV = 925000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
+ .regulators = smdk4x12_max8997_regulators,
+
+ .buck1_voltage[0] = 1100000, /* 1.1V */
+ .buck1_voltage[1] = 1100000, /* 1.1V */
+ .buck1_voltage[2] = 1100000, /* 1.1V */
+ .buck1_voltage[3] = 1100000, /* 1.1V */
+ .buck1_voltage[4] = 1100000, /* 1.1V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1100000, /* 1.1V */
+ .buck5_voltage[1] = 1100000, /* 1.1V */
+ .buck5_voltage[2] = 1100000, /* 1.1V */
+ .buck5_voltage[3] = 1100000, /* 1.1V */
+ .buck5_voltage[4] = 1100000, /* 1.1V */
+ .buck5_voltage[5] = 1100000, /* 1.1V */
+ .buck5_voltage[6] = 1100000, /* 1.1V */
+ .buck5_voltage[7] = 1100000, /* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", 0x66),
+ .platform_data = &smdk4x12_max8997_pdata,
+ }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(1),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+ .pwm_id = 1,
+ .pwm_period_ns = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+ KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+ .keymap = smdk4x12_keymap,
+ .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+ .keymap_data = &smdk4x12_keymap_data,
+ .rows = 2,
+ .cols = 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c3,
+ &s3c_device_i2c7,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+ clk_xusbxti.rate = 24000000;
+
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
+ s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, smdk4x12_i2c_devs0,
+ ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, smdk4x12_i2c_devs1,
+ ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, smdk4x12_i2c_devs3,
+ ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+ s3c_i2c7_set_platdata(NULL);
+ i2c_register_board_info(7, smdk4x12_i2c_devs7,
+ ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+ samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+ samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+ s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+ platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
deleted file mode 100644
index a7c65e0..0000000
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
- .win_mode = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
- .win[0] = &smdkc210_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
- [0] = {
- .start = EXYNOS4_PA_SROM_BANK(1),
- .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EINT(5),
- .end = IRQ_EINT(5),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
- .resource = smdkc210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_GPS],
- &exynos4_device_sysmmu,
- &samsung_asoc_dma,
- &s5p_device_fimd0,
- &smdkc210_lcd_lte480wv,
- &smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkc210_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
- samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
- s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
- platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdkc210_map_io,
- .init_machine = smdkc210_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea41495..2c1a076 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -9,7 +9,9 @@
*/
#include <linux/serial_core.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
@@ -112,6 +117,67 @@
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+ .win[0] = &smdkv310_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct resource smdkv310_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@
&exynos4_device_sysmmu,
&samsung_asoc_dma,
&samsung_asoc_idma,
+ &s5p_device_fimd0,
+ &smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
};
@@ -248,6 +316,7 @@
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+ s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
@@ -255,7 +324,16 @@
MACHINE_START(SMDKV310, "SMDKV310")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d89..2aac6f7 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -762,7 +762,7 @@
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.init_machine = universal_machine_init,
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index ddd8686..f191608 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -20,19 +20,31 @@
#include <linux/delay.h>
#include <linux/percpu.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+enum {
+ MCT_INT_SPI,
+ MCT_INT_PPI
+};
+
static unsigned long clk_cnt_per_tick;
static unsigned long clk_rate;
+static unsigned int mct_int_type;
struct mct_clock_event_device {
struct clock_event_device *evt;
void __iomem *base;
+ char name[10];
};
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
static void exynos4_mct_write(unsigned int value, void *addr)
{
@@ -42,57 +54,53 @@
__raw_writel(value, addr);
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 16; /* G_TCON write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 0; /* G_COMP0_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 1; /* G_COMP0_U write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 2; /* G_COMP0_ADD_INCR write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 0; /* G_CNT_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 1; /* G_CNT_U write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L0_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L1_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L0_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L1_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L0_ICNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L1_ICNTB write status */
- break;
- default:
- return;
+ if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+ u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+ switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+ case (u32) MCT_L_TCON_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 3; /* L_TCON write status */
+ break;
+ case (u32) MCT_L_ICNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 1; /* L_ICNTB write status */
+ break;
+ case (u32) MCT_L_TCNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 0; /* L_TCNTB write status */
+ break;
+ default:
+ return;
+ }
+ } else {
+ switch ((u32) addr) {
+ case (u32) EXYNOS4_MCT_G_TCON:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 16; /* G_TCON write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_L:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 0; /* G_COMP0_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_U:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 1; /* G_COMP0_U write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_L:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 0; /* G_CNT_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_U:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 1; /* G_CNT_U write status */
+ break;
+ default:
+ return;
+ }
}
/* Wait maximum 1 ms until written values are applied */
@@ -321,9 +329,8 @@
}
}
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
{
- struct mct_clock_event_device *mevt = dev_id;
struct clock_event_device *evt = mevt->evt;
/*
@@ -335,7 +342,20 @@
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = mevt->evt;
+
+ exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
@@ -360,14 +380,10 @@
mct_tick[cpu].evt = evt;
- if (cpu == 0) {
- mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
- evt->name = "mct_tick0";
- } else {
- mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
- evt->name = "mct_tick1";
- }
+ mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+ sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
+ evt->name = mct_tick[cpu].name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
evt->set_mode = exynos4_tick_set_mode;
@@ -384,13 +400,19 @@
exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
- if (cpu == 0) {
- mct_tick0_event_irq.dev_id = &mct_tick[cpu];
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ if (mct_int_type == MCT_INT_SPI) {
+ if (cpu == 0) {
+ mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L0;
+ setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ } else {
+ mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L1;
+ setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ }
} else {
- mct_tick1_event_irq.dev_id = &mct_tick[cpu];
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ gic_enable_ppi(IRQ_MCT_LOCALTIMER);
}
}
@@ -402,9 +424,10 @@
return 0;
}
-int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- return 0;
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_irq(evt->irq);
}
#endif /* CONFIG_LOCAL_TIMERS */
@@ -419,6 +442,11 @@
static void __init exynos4_timer_init(void)
{
+ if (soc_is_exynos4210())
+ mct_int_type = MCT_INT_SPI;
+ else
+ mct_int_type = MCT_INT_PPI;
+
exynos4_timer_resources();
exynos4_clocksource_init();
exynos4_clockevent_init();
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 0c90896..0559540 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,13 @@
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
extern void exynos4_secondary_startup(void);
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM5 : S5P_VA_SYSRAM)
/*
* control for which core is the next to come out of the secondary
@@ -64,9 +68,9 @@
static void __cpuinit exynos4_gic_secondary_init(void)
{
void __iomem *dist_base = S5P_VA_GIC_DIST +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
void __iomem *cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
int i;
/*
@@ -128,7 +132,7 @@
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
- write_pen_release(cpu);
+ write_pen_release(cpu_logical_map(cpu));
if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
__raw_writel(S5P_CORE_LOCAL_PWR_EN,
@@ -216,5 +220,6 @@
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
}
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca948..62e4f43 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -41,7 +41,6 @@
{ .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
{ .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
{ .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
{ .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
{ .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
{ .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
@@ -49,6 +48,10 @@
{ .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
+static struct sleep_save exynos4210_set_clksrc[] = {
+ { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
+};
+
static struct sleep_save exynos4_epll_save[] = {
SAVE_ITEM(S5P_EPLL_CON0),
SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@
};
static struct sleep_save exynos4_core_save[] = {
- /* CMU side */
- SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_CLKSRC_TOP0),
- SAVE_ITEM(S5P_CLKSRC_TOP1),
- SAVE_ITEM(S5P_CLKSRC_CAM),
- SAVE_ITEM(S5P_CLKSRC_TV),
- SAVE_ITEM(S5P_CLKSRC_MFC),
- SAVE_ITEM(S5P_CLKSRC_G3D),
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKSRC_LCD0),
- SAVE_ITEM(S5P_CLKSRC_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_FSYS),
- SAVE_ITEM(S5P_CLKSRC_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_CAM),
- SAVE_ITEM(S5P_CLKDIV_TV),
- SAVE_ITEM(S5P_CLKDIV_MFC),
- SAVE_ITEM(S5P_CLKDIV_G3D),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_LCD0),
- SAVE_ITEM(S5P_CLKDIV_LCD1),
- SAVE_ITEM(S5P_CLKDIV_MAUDIO),
- SAVE_ITEM(S5P_CLKDIV_FSYS0),
- SAVE_ITEM(S5P_CLKDIV_FSYS1),
- SAVE_ITEM(S5P_CLKDIV_FSYS2),
- SAVE_ITEM(S5P_CLKDIV_FSYS3),
- SAVE_ITEM(S5P_CLKDIV_PERIL0),
- SAVE_ITEM(S5P_CLKDIV_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_PERIL2),
- SAVE_ITEM(S5P_CLKDIV_PERIL3),
- SAVE_ITEM(S5P_CLKDIV_PERIL4),
- SAVE_ITEM(S5P_CLKDIV_PERIL5),
- SAVE_ITEM(S5P_CLKDIV_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
- SAVE_ITEM(S5P_CLKSRC_MASK_TV),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(S5P_CLKDIV2_RATIO),
- SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
- SAVE_ITEM(S5P_CLKGATE_IP_CAM),
- SAVE_ITEM(S5P_CLKGATE_IP_TV),
- SAVE_ITEM(S5P_CLKGATE_IP_MFC),
- SAVE_ITEM(S5P_CLKGATE_IP_G3D),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
- SAVE_ITEM(S5P_CLKGATE_IP_GPS),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
- SAVE_ITEM(S5P_CLKGATE_BLOCK),
- SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
- SAVE_ITEM(S5P_CLKSRC_DMC),
- SAVE_ITEM(S5P_CLKDIV_DMC0),
- SAVE_ITEM(S5P_CLKDIV_DMC1),
- SAVE_ITEM(S5P_CLKGATE_IP_DMC),
- SAVE_ITEM(S5P_CLKSRC_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
- SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
- SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
/* GIC side */
SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@
s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
+ if (soc_is_exynos4210())
+ s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
}
static int exynos4_pm_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 206ff2f..d5f1785 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -85,7 +85,7 @@
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.soft_reboot = 1,
.fixup = fixup_cats,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..012210c 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,7 +15,7 @@
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 1be2eeb..e5acde2 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x000003f8
orr \rv, \rp, #0xff000000 @ virtual
orr \rp, \rp, #0x7c000000 @ physical
@@ -31,7 +31,7 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
.if dc21285_low
mov \rp, #dc21285_low
.else
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 0f7aeff..0d3846f 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -647,7 +647,7 @@
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.reserve_lp0 = 1,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 3285e91..f41dba3 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,7 +15,7 @@
MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
/* Maintainer: Jamey Hicks / George France */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 0cf7a07..5927d3c 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -102,7 +102,7 @@
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &ib4220b_timer,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index 4fa09af..cd7437a 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -86,7 +86,7 @@
}
MACHINE_START(RUT100, "Teltonika RUT100")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &rut1xx_timer,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 88cc422..a367880 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd111_timer,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 3a22034..f382811 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd222_timer,
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index f40e006..8376707 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =GEMINI_UART_BASE @ physical
ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.endm
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
index 3bc2c70..40a0527b 100644
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ b/arch/arm/mach-gemini/include/mach/gpio.h
@@ -13,11 +13,6 @@
#define __MACH_GPIO_H__
#include <mach/irqs.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE)
#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h
deleted file mode 100644
index a50915f..0000000
--- a/arch/arm/mach-gemini/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define PLAT_PHYS_OFFSET UL(0x00000000)
-#else
-# define PLAT_PHYS_OFFSET UL(0x10000000)
-#endif
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 65f1bea..9886f19 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -29,7 +29,7 @@
MACHINE_START(H7201, "Hynix GMS30C7201")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0xc0001000,
+ .atag_offset = 0x1000,
.map_io = h720x_map_io,
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 884584a..284a134 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,7 +71,7 @@
MACHINE_START(H7202, "Hynix HMS30C7202")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0x40000100,
+ .atag_offset = 0x100,
.map_io = h720x_map_io,
.init_irq = h7202_init_irq,
.timer = &h7202_timer,
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index c2093e8..8a46157 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
.equ io_virt, IO_VIRT
.equ io_phys, IO_PHYS
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00020000 @ UART1
add \rv, \rp, #io_virt @ virtual address
add \rp, \rp, #io_phys @ physical base address
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
deleted file mode 100644
index 96dcf50..0000000
--- a/arch/arm/mach-h720x/include/mach/memory.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-#endif
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
new file mode 100644
index 0000000..986958a
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile
@@ -0,0 +1,6 @@
+obj-y := clock.o highbank.o system.o
+obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_PM_SLEEP) += pm.o
diff --git a/arch/arm/mach-highbank/Makefile.boot b/arch/arm/mach-highbank/Makefile.boot
new file mode 100644
index 0000000..dae9661
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c
new file mode 100644
index 0000000..c25a2ae
--- /dev/null
+++ b/arch/arm/mach-highbank/clock.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+
+struct clk {
+ unsigned long rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+
+static struct clk eclk = { .rate = 200000000 };
+static struct clk pclk = { .rate = 150000000 };
+
+static struct clk_lookup lookups[] = {
+ { .clk = &pclk, .con_id = "apb_pclk", },
+ { .clk = &pclk, .dev_id = "sp804", },
+ { .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
+ { .clk = &pclk, .dev_id = "fff36000.serial", },
+};
+
+void __init highbank_clocks_init(void)
+{
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
new file mode 100644
index 0000000..7e33fc9
--- /dev/null
+++ b/arch/arm/mach-highbank/core.h
@@ -0,0 +1,9 @@
+extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
+extern void highbank_clocks_init(void);
+extern void __iomem *scu_base_addr;
+#ifdef CONFIG_DEBUG_HIGHBANK_UART
+extern void highbank_lluart_map_io(void);
+#else
+static inline void highbank_lluart_map_io(void) {}
+#endif
+
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
new file mode 100644
index 0000000..b82dcf0
--- /dev/null
+++ b/arch/arm/mach-highbank/highbank.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/unified.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void __iomem *sregs_base;
+
+#define HB_SCU_VIRT_BASE 0xfee00000
+void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
+
+static struct map_desc scu_io_desc __initdata = {
+ .virtual = HB_SCU_VIRT_BASE,
+ .pfn = 0, /* run-time */
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+static void __init highbank_scu_map_io(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_io_desc.pfn = __phys_to_pfn(base);
+ iotable_init(&scu_io_desc, 1);
+}
+
+static void __init highbank_map_io(void)
+{
+ highbank_scu_map_io();
+ highbank_lluart_map_io();
+}
+
+#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
+#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
+
+void highbank_set_cpu_jump(int cpu, void *jump_addr)
+{
+ writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+ __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
+ outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
+ HB_JUMP_TABLE_PHYS(cpu) + 15);
+}
+
+const static struct of_device_id irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {}
+};
+
+static void __init highbank_init_irq(void)
+{
+ of_irq_init(irq_match);
+ l2x0_of_init(0, ~0UL);
+}
+
+static void __init highbank_timer_init(void)
+{
+ int irq;
+ struct device_node *np;
+ void __iomem *timer_base;
+
+ /* Map system registers */
+ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+ sregs_base = of_iomap(np, 0);
+ WARN_ON(!sregs_base);
+
+ np = of_find_compatible_node(NULL, NULL, "arm,sp804");
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
+ irq = irq_of_parse_and_map(np, 0);
+
+ highbank_clocks_init();
+
+ sp804_clocksource_init(timer_base + 0x20, "timer1");
+ sp804_clockevents_init(timer_base, irq, "timer0");
+}
+
+static struct sys_timer highbank_timer = {
+ .init = highbank_timer_init,
+};
+
+static void highbank_power_off(void)
+{
+ hignbank_set_pwr_shutdown();
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+ while (1)
+ cpu_do_idle();
+}
+
+static void __init highbank_init(void)
+{
+ pm_power_off = highbank_power_off;
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *highbank_match[] __initconst = {
+ "calxeda,highbank",
+ NULL,
+};
+
+DT_MACHINE_START(HIGHBANK, "Highbank")
+ .map_io = highbank_map_io,
+ .init_irq = highbank_init_irq,
+ .timer = &highbank_timer,
+ .init_machine = highbank_init,
+ .dt_compat = highbank_match,
+MACHINE_END
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
new file mode 100644
index 0000000..977cebb
--- /dev/null
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ flush_cache_all();
+
+ highbank_set_cpu_jump(cpu, secondary_startup);
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+ cpu_do_idle();
+
+ /* We should never return from idle */
+ panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * CPU0 should not be shut down via hotplug. cpu_idle can WFI
+ * or a proper shutdown or hibernate should be used.
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-highbank/include/mach/debug-macro.S b/arch/arm/mach-highbank/include/mach/debug-macro.S
new file mode 100644
index 0000000..cb57fe5
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart,rp,rv,tmp
+ movw \rv, #0x6000
+ movt \rv, #0xfee3
+ movw \rp, #0x6000
+ movt \rp, #0xfff3
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
new file mode 100644
index 0000000..73c11297
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -0,0 +1,7 @@
+#include <asm/hardware/entry-macro-gic.S>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-highbank/include/mach/gpio.h
similarity index 100%
rename from arch/um/include/asm/ftrace.h
rename to arch/arm/mach-highbank/include/mach/gpio.h
diff --git a/arch/arm/mach-highbank/include/mach/io.h b/arch/arm/mach-highbank/include/mach/io.h
new file mode 100644
index 0000000..70cfa3b
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/io.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define __io(a) ({ (void)(a); __typesafe_io(0); })
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/irqs.h b/arch/arm/mach-highbank/include/mach/irqs.h
new file mode 100644
index 0000000..9746aab
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/irqs.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define NR_IRQS 192
+
+#endif
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-highbank/include/mach/memory.h
similarity index 100%
copy from arch/um/include/asm/ftrace.h
copy to arch/arm/mach-highbank/include/mach/memory.h
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
new file mode 100644
index 0000000..7e81922
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+extern void arch_reset(char mode, const char *cmd);
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h
new file mode 100644
index 0000000..88dac7a
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/uncompress.h b/arch/arm/mach-highbank/include/mach/uncompress.h
new file mode 100644
index 0000000..bbe20e6
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/uncompress.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h
new file mode 100644
index 0000000..1969e954
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/vmalloc.h
@@ -0,0 +1 @@
+#define VMALLOC_END 0xFEE00000UL
diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c
new file mode 100644
index 0000000..3715750
--- /dev/null
+++ b/arch/arm/mach-highbank/lluart.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+
+#define HB_DEBUG_LL_PHYS_BASE 0xfff36000
+#define HB_DEBUG_LL_VIRT_BASE 0xfee36000
+
+static struct map_desc lluart_io_desc __initdata = {
+ .virtual = HB_DEBUG_LL_VIRT_BASE,
+ .pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+void __init highbank_lluart_map_io(void)
+{
+ iotable_init(&lluart_io_desc, 1);
+}
diff --git a/arch/arm/mach-highbank/localtimer.c b/arch/arm/mach-highbank/localtimer.c
new file mode 100644
index 0000000..5a00e79
--- /dev/null
+++ b/arch/arm/mach-highbank/localtimer.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+ if (!twd_base) {
+ twd_base = of_iomap(np, 0);
+ WARN_ON(!twd_base);
+ }
+ evt->irq = irq_of_parse_and_map(np, 0);
+ twd_timer_setup(evt);
+ return 0;
+}
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
new file mode 100644
index 0000000..d01364c
--- /dev/null
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ gic_raise_softirq(cpumask_of(cpu), 0);
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores;
+
+ ncores = scu_get_core_count(scu_base_addr);
+
+ /* sanity check */
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "highbank: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ scu_enable(scu_base_addr);
+
+ /*
+ * Write the address of secondary startup into the jump table
+ * The cores are in wfi and wait until they receive a soft interrupt
+ * and a non-zero value to jump to. Then the secondary CPU branches
+ * to this address.
+ */
+ for (i = 1; i < max_cpus; i++)
+ highbank_set_cpu_jump(i, secondary_startup);
+}
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
new file mode 100644
index 0000000..33b3beb
--- /dev/null
+++ b/arch/arm/mach-highbank/pm.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+
+#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+static int highbank_suspend_finish(unsigned long val)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static int highbank_pm_enter(suspend_state_t state)
+{
+ hignbank_set_pwr_suspend();
+ highbank_set_cpu_jump(0, cpu_resume);
+
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ cpu_suspend(0, highbank_suspend_finish);
+
+ return 0;
+}
+
+static const struct platform_suspend_ops highbank_pm_ops = {
+ .enter = highbank_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init highbank_pm_init(void)
+{
+ suspend_set_ops(&highbank_pm_ops);
+ return 0;
+}
+module_init(highbank_pm_init);
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
new file mode 100644
index 0000000..0e91338
--- /dev/null
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _MACH_HIGHBANK__SYSREGS_H_
+#define _MACH_HIGHBANK__SYSREGS_H_
+
+#include <linux/io.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_SREG_A9_PWR_REQ 0xf00
+#define HB_SREG_A9_BOOT_STAT 0xf04
+#define HB_SREG_A9_BOOT_DATA 0xf08
+
+#define HB_PWR_SUSPEND 0
+#define HB_PWR_SOFT_RESET 1
+#define HB_PWR_HARD_RESET 2
+#define HB_PWR_SHUTDOWN 3
+
+static inline void hignbank_set_pwr_suspend(void)
+{
+ writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_shutdown(void)
+{
+ writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_soft_reset(void)
+{
+ writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_hard_reset(void)
+{
+ writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+#endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
new file mode 100644
index 0000000..53f0c4c
--- /dev/null
+++ b/arch/arm/mach-highbank/system.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/proc-fns.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void arch_reset(char mode, const char *cmd)
+{
+ if (mode == 'h')
+ hignbank_set_pwr_hard_reset();
+ else
+ hignbank_set_pwr_soft_reset();
+
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ cpu_do_idle();
+}
+
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0519dd7..5f7f9c2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,10 +1,32 @@
config IMX_HAVE_DMA_V1
bool
+
+config HAVE_IMX_GPC
+ bool
+
+config HAVE_IMX_MMDC
+ bool
+
+config HAVE_IMX_SRC
+ bool
+
#
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX1
+ bool
+
+config MACH_MX21
+ bool
+
+config ARCH_MX25
+ bool
+
+config MACH_MX27
+ bool
+
config ARCH_MX31
bool
@@ -13,6 +35,7 @@
config SOC_IMX1
bool
+ select ARCH_MX1
select CPU_ARM920T
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
@@ -20,6 +43,7 @@
config SOC_IMX21
bool
+ select MACH_MX21
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
@@ -28,6 +52,7 @@
config SOC_IMX25
bool
+ select ARCH_MX25
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V2
select ARCH_MXC_IOMUX_V3
@@ -35,6 +60,7 @@
config SOC_IMX27
bool
+ select MACH_MX27
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
@@ -48,6 +74,7 @@
select ARCH_MXC_AUDMUX_V2
select ARCH_MX31
select MXC_AVIC
+ select SMP_ON_UP if SMP
config SOC_IMX35
bool
@@ -57,9 +84,10 @@
select HAVE_EPIT
select ARCH_MX35
select MXC_AVIC
+ select SMP_ON_UP if SMP
-if ARCH_MX1
+if ARCH_IMX_V4_V5
comment "MX1 platforms:"
config MACH_MXLADS
@@ -87,30 +115,6 @@
help
Say Yes here if you are using the Armadeus APF9328 development board
-endif
-
-if ARCH_MX2
-
-choice
- prompt "CPUs:"
- default MACH_MX21
-
-config MACH_MX21
- bool "i.MX21 support"
- help
- This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
- bool "i.MX27 support"
- help
- This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-endif
-
-if MACH_MX21
-
comment "MX21 platforms:"
config MACH_MX21ADS
@@ -124,15 +128,12 @@
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
-endif
-
-if ARCH_MX25
-
comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select SOC_IMX25
+ select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -174,10 +175,6 @@
endchoice
-endif
-
-if MACH_MX27
-
comment "MX27 platforms:"
config MACH_MX27ADS
@@ -356,7 +353,7 @@
endif
-if ARCH_MX3
+if ARCH_IMX_V6_V7
comment "MX31 platforms:"
@@ -449,6 +446,7 @@
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
@@ -485,6 +483,7 @@
bool "Support Dave/DENX QongEVB-LITE platform"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX2_WDT
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
@@ -605,4 +604,20 @@
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+comment "i.MX6 family:"
+
+config SOC_IMX6Q
+ bool "i.MX6 Quad support"
+ select ARM_GIC
+ select CACHE_L2X0
+ select CPU_V7
+ select HAVE_ARM_SCU
+ select HAVE_IMX_GPC
+ select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
+ select USE_OF
+
+ help
+ This enables support for Freescale i.MX6 Quad processor.
+
endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e9eb36d..aba7321 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,16 +1,15 @@
obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
-obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
-obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
-obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
-obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -61,3 +60,14 @@
obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_CPU_V7) += head-v7.o
+AFLAGS_head-v7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index dbe6120..22d8588 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -17,3 +17,7 @@
zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
+params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
+initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c
deleted file mode 100644
index 69d1322..0000000
--- a/arch/arm/mach-imx/cache-l2x0.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/hardware.h>
-
-static int mxc_init_l2x0(void)
-{
- void __iomem *l2x0_base;
- void __iomem *clkctl_base;
-
- if (!cpu_is_mx31() && !cpu_is_mx35())
- return 0;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
- clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
- if (clkctl_base != NULL) {
- writel(0x00000515, clkctl_base + L2_MEM_VAL);
- iounmap(clkctl_base);
- } else {
- pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
- }
-
- l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (IS_ERR(l2x0_base)) {
- printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
- PTR_ERR(l2x0_base));
- return 0;
- }
-
- l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
- return 0;
-}
-arch_initcall(mxc_init_l2x0);
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index e63e235..b0fec74c 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -263,6 +263,7 @@
DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk);
DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(iim_clk, 0, CCM_CGCR1, 26, NULL, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -310,6 +311,7 @@
_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
/* i.mx25 has the i.mx35 type sdma */
_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
};
int __init mx25_clocks_init(void)
@@ -334,6 +336,10 @@
/* Clock source for gpt is ahb_div */
__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
+ clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX25", mx25_revision());
+ clk_disable(&iim_clk);
+
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 6912b82..88fe00a 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -583,7 +583,7 @@
DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(ata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(pata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk);
@@ -666,7 +666,7 @@
_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
@@ -751,6 +751,8 @@
clk_enable(&gpio_clk);
clk_enable(&emi_clk);
clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX27", mx27_revision());
+ clk_disable(&iim_clk);
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
clk_enable(&uart1_clk);
diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
index d973770..988a281 100644
--- a/arch/arm/mach-imx/clock-imx31.c
+++ b/arch/arm/mach-imx/clock-imx31.c
@@ -476,7 +476,7 @@
DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
@@ -562,7 +562,7 @@
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK(NULL, "firi", firi_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
_REGISTER_CLOCK(NULL, "rng", rng_clk)
_REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
@@ -611,11 +611,11 @@
clk_enable(&gpt_clk);
clk_enable(&emi_clk);
clk_enable(&iim_clk);
+ mx31_revision();
+ clk_disable(&iim_clk);
clk_enable(&serial_pll_clk);
- mx31_read_cpu_rev();
-
if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 88b62a07..8116f11 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -354,7 +354,7 @@
}
DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL);
-DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
+DEFINE_CLOCK(pata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */
DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL);
DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL);
@@ -447,7 +447,7 @@
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
@@ -537,7 +537,8 @@
__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
clk_enable(&iim_clk);
- mx35_read_cpu_rev();
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+ clk_disable(&iim_clk);
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
new file mode 100644
index 0000000..e0b926d
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -0,0 +1,2012 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/div64.h>
+#include <asm/mach/map.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define PLL_BASE IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
+#define PLL1_SYS (PLL_BASE + 0x000)
+#define PLL2_BUS (PLL_BASE + 0x030)
+#define PLL3_USB_OTG (PLL_BASE + 0x010)
+#define PLL4_AUDIO (PLL_BASE + 0x070)
+#define PLL5_VIDEO (PLL_BASE + 0x0a0)
+#define PLL6_MLB (PLL_BASE + 0x0d0)
+#define PLL7_USB_HOST (PLL_BASE + 0x020)
+#define PLL8_ENET (PLL_BASE + 0x0e0)
+#define PFD_480 (PLL_BASE + 0x0f0)
+#define PFD_528 (PLL_BASE + 0x100)
+#define PLL_NUM_OFFSET 0x010
+#define PLL_DENOM_OFFSET 0x020
+
+#define PFD0 7
+#define PFD1 15
+#define PFD2 23
+#define PFD3 31
+#define PFD_FRAC_MASK 0x3f
+
+#define BM_PLL_BYPASS (0x1 << 16)
+#define BM_PLL_ENABLE (0x1 << 13)
+#define BM_PLL_POWER_DOWN (0x1 << 12)
+#define BM_PLL_LOCK (0x1 << 31)
+#define BP_PLL_SYS_DIV_SELECT 0
+#define BM_PLL_SYS_DIV_SELECT (0x7f << 0)
+#define BP_PLL_BUS_DIV_SELECT 0
+#define BM_PLL_BUS_DIV_SELECT (0x1 << 0)
+#define BP_PLL_USB_DIV_SELECT 0
+#define BM_PLL_USB_DIV_SELECT (0x3 << 0)
+#define BP_PLL_AV_DIV_SELECT 0
+#define BM_PLL_AV_DIV_SELECT (0x7f << 0)
+#define BP_PLL_ENET_DIV_SELECT 0
+#define BM_PLL_ENET_DIV_SELECT (0x3 << 0)
+#define BM_PLL_ENET_EN_PCIE (0x1 << 19)
+#define BM_PLL_ENET_EN_SATA (0x1 << 20)
+
+#define CCM_BASE IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
+#define CCR (CCM_BASE + 0x00)
+#define CCDR (CCM_BASE + 0x04)
+#define CSR (CCM_BASE + 0x08)
+#define CCSR (CCM_BASE + 0x0c)
+#define CACRR (CCM_BASE + 0x10)
+#define CBCDR (CCM_BASE + 0x14)
+#define CBCMR (CCM_BASE + 0x18)
+#define CSCMR1 (CCM_BASE + 0x1c)
+#define CSCMR2 (CCM_BASE + 0x20)
+#define CSCDR1 (CCM_BASE + 0x24)
+#define CS1CDR (CCM_BASE + 0x28)
+#define CS2CDR (CCM_BASE + 0x2c)
+#define CDCDR (CCM_BASE + 0x30)
+#define CHSCCDR (CCM_BASE + 0x34)
+#define CSCDR2 (CCM_BASE + 0x38)
+#define CSCDR3 (CCM_BASE + 0x3c)
+#define CSCDR4 (CCM_BASE + 0x40)
+#define CWDR (CCM_BASE + 0x44)
+#define CDHIPR (CCM_BASE + 0x48)
+#define CDCR (CCM_BASE + 0x4c)
+#define CTOR (CCM_BASE + 0x50)
+#define CLPCR (CCM_BASE + 0x54)
+#define CISR (CCM_BASE + 0x58)
+#define CIMR (CCM_BASE + 0x5c)
+#define CCOSR (CCM_BASE + 0x60)
+#define CGPR (CCM_BASE + 0x64)
+#define CCGR0 (CCM_BASE + 0x68)
+#define CCGR1 (CCM_BASE + 0x6c)
+#define CCGR2 (CCM_BASE + 0x70)
+#define CCGR3 (CCM_BASE + 0x74)
+#define CCGR4 (CCM_BASE + 0x78)
+#define CCGR5 (CCM_BASE + 0x7c)
+#define CCGR6 (CCM_BASE + 0x80)
+#define CCGR7 (CCM_BASE + 0x84)
+#define CMEOR (CCM_BASE + 0x88)
+
+#define CG0 0
+#define CG1 2
+#define CG2 4
+#define CG3 6
+#define CG4 8
+#define CG5 10
+#define CG6 12
+#define CG7 14
+#define CG8 16
+#define CG9 18
+#define CG10 20
+#define CG11 22
+#define CG12 24
+#define CG13 26
+#define CG14 28
+#define CG15 30
+
+#define BM_CCSR_PLL1_SW_SEL (0x1 << 2)
+#define BM_CCSR_STEP_SEL (0x1 << 8)
+
+#define BP_CACRR_ARM_PODF 0
+#define BM_CACRR_ARM_PODF (0x7 << 0)
+
+#define BP_CBCDR_PERIPH2_CLK2_PODF 0
+#define BM_CBCDR_PERIPH2_CLK2_PODF (0x7 << 0)
+#define BP_CBCDR_MMDC_CH1_AXI_PODF 3
+#define BM_CBCDR_MMDC_CH1_AXI_PODF (0x7 << 3)
+#define BP_CBCDR_AXI_SEL 6
+#define BM_CBCDR_AXI_SEL (0x3 << 6)
+#define BP_CBCDR_IPG_PODF 8
+#define BM_CBCDR_IPG_PODF (0x3 << 8)
+#define BP_CBCDR_AHB_PODF 10
+#define BM_CBCDR_AHB_PODF (0x7 << 10)
+#define BP_CBCDR_AXI_PODF 16
+#define BM_CBCDR_AXI_PODF (0x7 << 16)
+#define BP_CBCDR_MMDC_CH0_AXI_PODF 19
+#define BM_CBCDR_MMDC_CH0_AXI_PODF (0x7 << 19)
+#define BP_CBCDR_PERIPH_CLK_SEL 25
+#define BM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
+#define BP_CBCDR_PERIPH2_CLK_SEL 26
+#define BM_CBCDR_PERIPH2_CLK_SEL (0x1 << 26)
+#define BP_CBCDR_PERIPH_CLK2_PODF 27
+#define BM_CBCDR_PERIPH_CLK2_PODF (0x7 << 27)
+
+#define BP_CBCMR_GPU2D_AXI_SEL 0
+#define BM_CBCMR_GPU2D_AXI_SEL (0x1 << 0)
+#define BP_CBCMR_GPU3D_AXI_SEL 1
+#define BM_CBCMR_GPU3D_AXI_SEL (0x1 << 1)
+#define BP_CBCMR_GPU3D_CORE_SEL 4
+#define BM_CBCMR_GPU3D_CORE_SEL (0x3 << 4)
+#define BP_CBCMR_GPU3D_SHADER_SEL 8
+#define BM_CBCMR_GPU3D_SHADER_SEL (0x3 << 8)
+#define BP_CBCMR_PCIE_AXI_SEL 10
+#define BM_CBCMR_PCIE_AXI_SEL (0x1 << 10)
+#define BP_CBCMR_VDO_AXI_SEL 11
+#define BM_CBCMR_VDO_AXI_SEL (0x1 << 11)
+#define BP_CBCMR_PERIPH_CLK2_SEL 12
+#define BM_CBCMR_PERIPH_CLK2_SEL (0x3 << 12)
+#define BP_CBCMR_VPU_AXI_SEL 14
+#define BM_CBCMR_VPU_AXI_SEL (0x3 << 14)
+#define BP_CBCMR_GPU2D_CORE_SEL 16
+#define BM_CBCMR_GPU2D_CORE_SEL (0x3 << 16)
+#define BP_CBCMR_PRE_PERIPH_CLK_SEL 18
+#define BM_CBCMR_PRE_PERIPH_CLK_SEL (0x3 << 18)
+#define BP_CBCMR_PERIPH2_CLK2_SEL 20
+#define BM_CBCMR_PERIPH2_CLK2_SEL (0x1 << 20)
+#define BP_CBCMR_PRE_PERIPH2_CLK_SEL 21
+#define BM_CBCMR_PRE_PERIPH2_CLK_SEL (0x3 << 21)
+#define BP_CBCMR_GPU2D_CORE_PODF 23
+#define BM_CBCMR_GPU2D_CORE_PODF (0x7 << 23)
+#define BP_CBCMR_GPU3D_CORE_PODF 26
+#define BM_CBCMR_GPU3D_CORE_PODF (0x7 << 26)
+#define BP_CBCMR_GPU3D_SHADER_PODF 29
+#define BM_CBCMR_GPU3D_SHADER_PODF (0x7 << 29)
+
+#define BP_CSCMR1_PERCLK_PODF 0
+#define BM_CSCMR1_PERCLK_PODF (0x3f << 0)
+#define BP_CSCMR1_SSI1_SEL 10
+#define BM_CSCMR1_SSI1_SEL (0x3 << 10)
+#define BP_CSCMR1_SSI2_SEL 12
+#define BM_CSCMR1_SSI2_SEL (0x3 << 12)
+#define BP_CSCMR1_SSI3_SEL 14
+#define BM_CSCMR1_SSI3_SEL (0x3 << 14)
+#define BP_CSCMR1_USDHC1_SEL 16
+#define BM_CSCMR1_USDHC1_SEL (0x1 << 16)
+#define BP_CSCMR1_USDHC2_SEL 17
+#define BM_CSCMR1_USDHC2_SEL (0x1 << 17)
+#define BP_CSCMR1_USDHC3_SEL 18
+#define BM_CSCMR1_USDHC3_SEL (0x1 << 18)
+#define BP_CSCMR1_USDHC4_SEL 19
+#define BM_CSCMR1_USDHC4_SEL (0x1 << 19)
+#define BP_CSCMR1_EMI_PODF 20
+#define BM_CSCMR1_EMI_PODF (0x7 << 20)
+#define BP_CSCMR1_EMI_SLOW_PODF 23
+#define BM_CSCMR1_EMI_SLOW_PODF (0x7 << 23)
+#define BP_CSCMR1_EMI_SEL 27
+#define BM_CSCMR1_EMI_SEL (0x3 << 27)
+#define BP_CSCMR1_EMI_SLOW_SEL 29
+#define BM_CSCMR1_EMI_SLOW_SEL (0x3 << 29)
+
+#define BP_CSCMR2_CAN_PODF 2
+#define BM_CSCMR2_CAN_PODF (0x3f << 2)
+#define BM_CSCMR2_LDB_DI0_IPU_DIV (0x1 << 10)
+#define BM_CSCMR2_LDB_DI1_IPU_DIV (0x1 << 11)
+#define BP_CSCMR2_ESAI_SEL 19
+#define BM_CSCMR2_ESAI_SEL (0x3 << 19)
+
+#define BP_CSCDR1_UART_PODF 0
+#define BM_CSCDR1_UART_PODF (0x3f << 0)
+#define BP_CSCDR1_USDHC1_PODF 11
+#define BM_CSCDR1_USDHC1_PODF (0x7 << 11)
+#define BP_CSCDR1_USDHC2_PODF 16
+#define BM_CSCDR1_USDHC2_PODF (0x7 << 16)
+#define BP_CSCDR1_USDHC3_PODF 19
+#define BM_CSCDR1_USDHC3_PODF (0x7 << 19)
+#define BP_CSCDR1_USDHC4_PODF 22
+#define BM_CSCDR1_USDHC4_PODF (0x7 << 22)
+#define BP_CSCDR1_VPU_AXI_PODF 25
+#define BM_CSCDR1_VPU_AXI_PODF (0x7 << 25)
+
+#define BP_CS1CDR_SSI1_PODF 0
+#define BM_CS1CDR_SSI1_PODF (0x3f << 0)
+#define BP_CS1CDR_SSI1_PRED 6
+#define BM_CS1CDR_SSI1_PRED (0x7 << 6)
+#define BP_CS1CDR_ESAI_PRED 9
+#define BM_CS1CDR_ESAI_PRED (0x7 << 9)
+#define BP_CS1CDR_SSI3_PODF 16
+#define BM_CS1CDR_SSI3_PODF (0x3f << 16)
+#define BP_CS1CDR_SSI3_PRED 22
+#define BM_CS1CDR_SSI3_PRED (0x7 << 22)
+#define BP_CS1CDR_ESAI_PODF 25
+#define BM_CS1CDR_ESAI_PODF (0x7 << 25)
+
+#define BP_CS2CDR_SSI2_PODF 0
+#define BM_CS2CDR_SSI2_PODF (0x3f << 0)
+#define BP_CS2CDR_SSI2_PRED 6
+#define BM_CS2CDR_SSI2_PRED (0x7 << 6)
+#define BP_CS2CDR_LDB_DI0_SEL 9
+#define BM_CS2CDR_LDB_DI0_SEL (0x7 << 9)
+#define BP_CS2CDR_LDB_DI1_SEL 12
+#define BM_CS2CDR_LDB_DI1_SEL (0x7 << 12)
+#define BP_CS2CDR_ENFC_SEL 16
+#define BM_CS2CDR_ENFC_SEL (0x3 << 16)
+#define BP_CS2CDR_ENFC_PRED 18
+#define BM_CS2CDR_ENFC_PRED (0x7 << 18)
+#define BP_CS2CDR_ENFC_PODF 21
+#define BM_CS2CDR_ENFC_PODF (0x3f << 21)
+
+#define BP_CDCDR_ASRC_SERIAL_SEL 7
+#define BM_CDCDR_ASRC_SERIAL_SEL (0x3 << 7)
+#define BP_CDCDR_ASRC_SERIAL_PODF 9
+#define BM_CDCDR_ASRC_SERIAL_PODF (0x7 << 9)
+#define BP_CDCDR_ASRC_SERIAL_PRED 12
+#define BM_CDCDR_ASRC_SERIAL_PRED (0x7 << 12)
+#define BP_CDCDR_SPDIF_SEL 20
+#define BM_CDCDR_SPDIF_SEL (0x3 << 20)
+#define BP_CDCDR_SPDIF_PODF 22
+#define BM_CDCDR_SPDIF_PODF (0x7 << 22)
+#define BP_CDCDR_SPDIF_PRED 25
+#define BM_CDCDR_SPDIF_PRED (0x7 << 25)
+#define BP_CDCDR_HSI_TX_PODF 29
+#define BM_CDCDR_HSI_TX_PODF (0x7 << 29)
+#define BP_CDCDR_HSI_TX_SEL 28
+#define BM_CDCDR_HSI_TX_SEL (0x1 << 28)
+
+#define BP_CHSCCDR_IPU1_DI0_SEL 0
+#define BM_CHSCCDR_IPU1_DI0_SEL (0x7 << 0)
+#define BP_CHSCCDR_IPU1_DI0_PRE_PODF 3
+#define BM_CHSCCDR_IPU1_DI0_PRE_PODF (0x7 << 3)
+#define BP_CHSCCDR_IPU1_DI0_PRE_SEL 6
+#define BM_CHSCCDR_IPU1_DI0_PRE_SEL (0x7 << 6)
+#define BP_CHSCCDR_IPU1_DI1_SEL 9
+#define BM_CHSCCDR_IPU1_DI1_SEL (0x7 << 9)
+#define BP_CHSCCDR_IPU1_DI1_PRE_PODF 12
+#define BM_CHSCCDR_IPU1_DI1_PRE_PODF (0x7 << 12)
+#define BP_CHSCCDR_IPU1_DI1_PRE_SEL 15
+#define BM_CHSCCDR_IPU1_DI1_PRE_SEL (0x7 << 15)
+
+#define BP_CSCDR2_IPU2_DI0_SEL 0
+#define BM_CSCDR2_IPU2_DI0_SEL (0x7)
+#define BP_CSCDR2_IPU2_DI0_PRE_PODF 3
+#define BM_CSCDR2_IPU2_DI0_PRE_PODF (0x7 << 3)
+#define BP_CSCDR2_IPU2_DI0_PRE_SEL 6
+#define BM_CSCDR2_IPU2_DI0_PRE_SEL (0x7 << 6)
+#define BP_CSCDR2_IPU2_DI1_SEL 9
+#define BM_CSCDR2_IPU2_DI1_SEL (0x7 << 9)
+#define BP_CSCDR2_IPU2_DI1_PRE_PODF 12
+#define BM_CSCDR2_IPU2_DI1_PRE_PODF (0x7 << 12)
+#define BP_CSCDR2_IPU2_DI1_PRE_SEL 15
+#define BM_CSCDR2_IPU2_DI1_PRE_SEL (0x7 << 15)
+#define BP_CSCDR2_ECSPI_CLK_PODF 19
+#define BM_CSCDR2_ECSPI_CLK_PODF (0x3f << 19)
+
+#define BP_CSCDR3_IPU1_HSP_SEL 9
+#define BM_CSCDR3_IPU1_HSP_SEL (0x3 << 9)
+#define BP_CSCDR3_IPU1_HSP_PODF 11
+#define BM_CSCDR3_IPU1_HSP_PODF (0x7 << 11)
+#define BP_CSCDR3_IPU2_HSP_SEL 14
+#define BM_CSCDR3_IPU2_HSP_SEL (0x3 << 14)
+#define BP_CSCDR3_IPU2_HSP_PODF 16
+#define BM_CSCDR3_IPU2_HSP_PODF (0x7 << 16)
+
+#define BM_CDHIPR_AXI_PODF_BUSY (0x1 << 0)
+#define BM_CDHIPR_AHB_PODF_BUSY (0x1 << 1)
+#define BM_CDHIPR_MMDC_CH1_PODF_BUSY (0x1 << 2)
+#define BM_CDHIPR_PERIPH2_SEL_BUSY (0x1 << 3)
+#define BM_CDHIPR_MMDC_CH0_PODF_BUSY (0x1 << 4)
+#define BM_CDHIPR_PERIPH_SEL_BUSY (0x1 << 5)
+#define BM_CDHIPR_ARM_PODF_BUSY (0x1 << 16)
+
+#define BP_CLPCR_LPM 0
+#define BM_CLPCR_LPM (0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define BM_CLPCR_SBYOS (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define BM_CLPCR_VSTBY (0x1 << 8)
+#define BP_CLPCR_STBY_COUNT 9
+#define BM_CLPCR_STBY_COUNT (0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+
+#define FREQ_480M 480000000
+#define FREQ_528M 528000000
+#define FREQ_594M 594000000
+#define FREQ_650M 650000000
+#define FREQ_1300M 1300000000
+
+static struct clk pll1_sys;
+static struct clk pll2_bus;
+static struct clk pll3_usb_otg;
+static struct clk pll4_audio;
+static struct clk pll5_video;
+static struct clk pll6_mlb;
+static struct clk pll7_usb_host;
+static struct clk pll8_enet;
+static struct clk apbh_dma_clk;
+static struct clk arm_clk;
+static struct clk ipg_clk;
+static struct clk ahb_clk;
+static struct clk axi_clk;
+static struct clk mmdc_ch0_axi_clk;
+static struct clk mmdc_ch1_axi_clk;
+static struct clk periph_clk;
+static struct clk periph_pre_clk;
+static struct clk periph_clk2_clk;
+static struct clk periph2_clk;
+static struct clk periph2_pre_clk;
+static struct clk periph2_clk2_clk;
+static struct clk gpu2d_core_clk;
+static struct clk gpu3d_core_clk;
+static struct clk gpu3d_shader_clk;
+static struct clk ipg_perclk;
+static struct clk emi_clk;
+static struct clk emi_slow_clk;
+static struct clk can1_clk;
+static struct clk uart_clk;
+static struct clk usdhc1_clk;
+static struct clk usdhc2_clk;
+static struct clk usdhc3_clk;
+static struct clk usdhc4_clk;
+static struct clk vpu_clk;
+static struct clk hsi_tx_clk;
+static struct clk ipu1_di0_pre_clk;
+static struct clk ipu1_di1_pre_clk;
+static struct clk ipu2_di0_pre_clk;
+static struct clk ipu2_di1_pre_clk;
+static struct clk ipu1_clk;
+static struct clk ipu2_clk;
+static struct clk ssi1_clk;
+static struct clk ssi3_clk;
+static struct clk esai_clk;
+static struct clk ssi2_clk;
+static struct clk spdif_clk;
+static struct clk asrc_serial_clk;
+static struct clk gpu2d_axi_clk;
+static struct clk gpu3d_axi_clk;
+static struct clk pcie_clk;
+static struct clk vdo_axi_clk;
+static struct clk ldb_di0_clk;
+static struct clk ldb_di1_clk;
+static struct clk ipu1_di0_clk;
+static struct clk ipu1_di1_clk;
+static struct clk ipu2_di0_clk;
+static struct clk ipu2_di1_clk;
+static struct clk enfc_clk;
+static struct clk dummy_clk = {};
+
+static unsigned long external_high_reference;
+static unsigned long external_low_reference;
+static unsigned long oscillator_reference;
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+ return oscillator_reference;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+ .get_rate = get_oscillator_reference_clock_rate,
+};
+
+static inline void __iomem *pll_get_reg_addr(struct clk *pll)
+{
+ if (pll == &pll1_sys)
+ return PLL1_SYS;
+ else if (pll == &pll2_bus)
+ return PLL2_BUS;
+ else if (pll == &pll3_usb_otg)
+ return PLL3_USB_OTG;
+ else if (pll == &pll4_audio)
+ return PLL4_AUDIO;
+ else if (pll == &pll5_video)
+ return PLL5_VIDEO;
+ else if (pll == &pll6_mlb)
+ return PLL6_MLB;
+ else if (pll == &pll7_usb_host)
+ return PLL7_USB_HOST;
+ else if (pll == &pll8_enet)
+ return PLL8_ENET;
+ else
+ BUG();
+
+ return NULL;
+}
+
+static int pll_enable(struct clk *clk)
+{
+ int timeout = 0x100000;
+ void __iomem *reg;
+ u32 val;
+
+ reg = pll_get_reg_addr(clk);
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_BYPASS;
+ val &= ~BM_PLL_POWER_DOWN;
+ /* 480MHz PLLs have the opposite definition for power bit */
+ if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+ val |= BM_PLL_POWER_DOWN;
+ writel_relaxed(val, reg);
+
+ /* Wait for PLL to lock */
+ while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ return -EBUSY;
+
+ /* Enable the PLL output now */
+ val = readl_relaxed(reg);
+ val |= BM_PLL_ENABLE;
+ writel_relaxed(val, reg);
+
+ return 0;
+}
+
+static void pll_disable(struct clk *clk)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = pll_get_reg_addr(clk);
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_ENABLE;
+ val |= BM_PLL_BYPASS;
+ val |= BM_PLL_POWER_DOWN;
+ if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+ val &= ~BM_PLL_POWER_DOWN;
+ writel_relaxed(val, reg);
+}
+
+static unsigned long pll1_sys_get_rate(struct clk *clk)
+{
+ u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
+ BP_PLL_SYS_DIV_SELECT;
+
+ return clk_get_rate(clk->parent) * div / 2;
+}
+
+static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, div;
+
+ if (rate < FREQ_650M || rate > FREQ_1300M)
+ return -EINVAL;
+
+ div = rate * 2 / clk_get_rate(clk->parent);
+ val = readl_relaxed(PLL1_SYS);
+ val &= ~BM_PLL_SYS_DIV_SELECT;
+ val |= div << BP_PLL_SYS_DIV_SELECT;
+ writel_relaxed(val, PLL1_SYS);
+
+ return 0;
+}
+
+static unsigned long pll8_enet_get_rate(struct clk *clk)
+{
+ u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
+ BP_PLL_ENET_DIV_SELECT;
+
+ switch (div) {
+ case 0:
+ return 25000000;
+ case 1:
+ return 50000000;
+ case 2:
+ return 100000000;
+ case 3:
+ return 125000000;
+ }
+
+ return 0;
+}
+
+static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, div;
+
+ switch (rate) {
+ case 25000000:
+ div = 0;
+ break;
+ case 50000000:
+ div = 1;
+ break;
+ case 100000000:
+ div = 2;
+ break;
+ case 125000000:
+ div = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= ~BM_PLL_ENET_DIV_SELECT;
+ val |= div << BP_PLL_ENET_DIV_SELECT;
+ writel_relaxed(val, PLL8_ENET);
+
+ return 0;
+}
+
+static unsigned long pll_av_get_rate(struct clk *clk)
+{
+ void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
+ u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
+ u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
+ BP_PLL_AV_DIV_SELECT;
+
+ return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static int pll_av_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+ unsigned int parent_rate = clk_get_rate(clk->parent);
+ u32 val, div;
+ u32 mfn, mfd = 1000000;
+ s64 temp64;
+
+ if (rate < FREQ_650M || rate > FREQ_1300M)
+ return -EINVAL;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_AV_DIV_SELECT;
+ val |= div << BP_PLL_AV_DIV_SELECT;
+ writel_relaxed(val, reg);
+ writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
+ writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
+
+ return 0;
+}
+
+static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
+{
+ void __iomem *reg;
+
+ if (clk == &pll2_bus) {
+ reg = PLL2_BUS;
+ *bp = BP_PLL_BUS_DIV_SELECT;
+ *bm = BM_PLL_BUS_DIV_SELECT;
+ } else if (clk == &pll3_usb_otg) {
+ reg = PLL3_USB_OTG;
+ *bp = BP_PLL_USB_DIV_SELECT;
+ *bm = BM_PLL_USB_DIV_SELECT;
+ } else if (clk == &pll7_usb_host) {
+ reg = PLL7_USB_HOST;
+ *bp = BP_PLL_USB_DIV_SELECT;
+ *bm = BM_PLL_USB_DIV_SELECT;
+ } else {
+ BUG();
+ }
+
+ return reg;
+}
+
+static unsigned long pll_get_rate(struct clk *clk)
+{
+ void __iomem *reg;
+ u32 div, bp, bm;
+
+ reg = pll_get_div_reg_bit(clk, &bp, &bm);
+ div = (readl_relaxed(reg) & bm) >> bp;
+
+ return (div == 1) ? clk_get_rate(clk->parent) * 22 :
+ clk_get_rate(clk->parent) * 20;
+}
+
+static int pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *reg;
+ u32 val, div, bp, bm;
+
+ if (rate == FREQ_528M)
+ div = 1;
+ else if (rate == FREQ_480M)
+ div = 0;
+ else
+ return -EINVAL;
+
+ reg = pll_get_div_reg_bit(clk, &bp, &bm);
+ val = readl_relaxed(reg);
+ val &= ~bm;
+ val |= div << bp;
+ writel_relaxed(val, reg);
+
+ return 0;
+}
+
+#define pll2_bus_get_rate pll_get_rate
+#define pll2_bus_set_rate pll_set_rate
+#define pll3_usb_otg_get_rate pll_get_rate
+#define pll3_usb_otg_set_rate pll_set_rate
+#define pll7_usb_host_get_rate pll_get_rate
+#define pll7_usb_host_set_rate pll_set_rate
+#define pll4_audio_get_rate pll_av_get_rate
+#define pll4_audio_set_rate pll_av_set_rate
+#define pll5_video_get_rate pll_av_get_rate
+#define pll5_video_set_rate pll_av_set_rate
+#define pll6_mlb_get_rate NULL
+#define pll6_mlb_set_rate NULL
+
+#define DEF_PLL(name) \
+ static struct clk name = { \
+ .enable = pll_enable, \
+ .disable = pll_disable, \
+ .get_rate = name##_get_rate, \
+ .set_rate = name##_set_rate, \
+ .parent = &osc_clk, \
+ }
+
+DEF_PLL(pll1_sys);
+DEF_PLL(pll2_bus);
+DEF_PLL(pll3_usb_otg);
+DEF_PLL(pll4_audio);
+DEF_PLL(pll5_video);
+DEF_PLL(pll6_mlb);
+DEF_PLL(pll7_usb_host);
+DEF_PLL(pll8_enet);
+
+static unsigned long pfd_get_rate(struct clk *clk)
+{
+ u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+ u32 frac, bp_frac;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ bp_frac = clk->enable_shift - 7;
+ frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int pfd_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, frac, bp_frac;
+ u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ /*
+ * Round up the divider so that we don't set a rate
+ * higher than what is requested
+ */
+ tmp += rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ frac = (frac < 12) ? 12 : frac;
+ frac = (frac > 35) ? 35 : frac;
+
+ /*
+ * The frac field always starts from 7 bits lower
+ * position of enable bit
+ */
+ bp_frac = clk->enable_shift - 7;
+ val = readl_relaxed(clk->enable_reg);
+ val &= ~(PFD_FRAC_MASK << bp_frac);
+ val |= frac << bp_frac;
+ writel_relaxed(val, clk->enable_reg);
+
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ do_div(tmp, frac);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+
+ return 0;
+}
+
+static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 frac;
+ u64 tmp;
+
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ tmp += rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ frac = (frac < 12) ? 12 : frac;
+ frac = (frac > 35) ? 35 : frac;
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int pfd_enable(struct clk *clk)
+{
+ u32 val;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ val = readl_relaxed(clk->enable_reg);
+ val &= ~(1 << clk->enable_shift);
+ writel_relaxed(val, clk->enable_reg);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+
+ return 0;
+}
+
+static void pfd_disable(struct clk *clk)
+{
+ u32 val;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ val = readl_relaxed(clk->enable_reg);
+ val |= 1 << clk->enable_shift;
+ writel_relaxed(val, clk->enable_reg);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+}
+
+#define DEF_PFD(name, er, es, p) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = pfd_enable, \
+ .disable = pfd_disable, \
+ .get_rate = pfd_get_rate, \
+ .set_rate = pfd_set_rate, \
+ .round_rate = pfd_round_rate, \
+ .parent = p, \
+ }
+
+DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
+DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
+DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
+DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
+
+static unsigned long pll2_200m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk pll2_200m = {
+ .parent = &pll2_pfd_400m,
+ .get_rate = pll2_200m_get_rate,
+};
+
+static unsigned long pll3_120m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 4;
+}
+
+static struct clk pll3_120m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_120m_get_rate,
+};
+
+static unsigned long pll3_80m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 6;
+}
+
+static struct clk pll3_80m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_80m_get_rate,
+};
+
+static unsigned long pll3_60m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 8;
+}
+
+static struct clk pll3_60m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_60m_get_rate,
+};
+
+static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 val = readl_relaxed(CCSR);
+
+ if (parent == &pll1_sys) {
+ val &= ~BM_CCSR_PLL1_SW_SEL;
+ val &= ~BM_CCSR_STEP_SEL;
+ } else if (parent == &osc_clk) {
+ val |= BM_CCSR_PLL1_SW_SEL;
+ val &= ~BM_CCSR_STEP_SEL;
+ } else if (parent == &pll2_pfd_400m) {
+ val |= BM_CCSR_PLL1_SW_SEL;
+ val |= BM_CCSR_STEP_SEL;
+ } else {
+ return -EINVAL;
+ }
+
+ writel_relaxed(val, CCSR);
+
+ return 0;
+}
+
+static struct clk pll1_sw_clk = {
+ .parent = &pll1_sys,
+ .set_parent = pll1_sw_clk_set_parent,
+};
+
+static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
+{
+ u32 min_pred, temp_pred, old_err, err;
+
+ if (div >= 512) {
+ *pred = 8;
+ *podf = 64;
+ } else if (div >= 8) {
+ min_pred = (div - 1) / 64 + 1;
+ old_err = 8;
+ for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
+ err = div % temp_pred;
+ if (err == 0) {
+ *pred = temp_pred;
+ break;
+ }
+ err = temp_pred - err;
+ if (err < old_err) {
+ old_err = err;
+ *pred = temp_pred;
+ }
+ }
+ *podf = (div + *pred - 1) / *pred;
+ } else if (div < 8) {
+ *pred = div;
+ *podf = 1;
+ }
+}
+
+static int _clk_enable(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg |= 0x3 << clk->enable_shift;
+ writel_relaxed(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg &= ~(0x3 << clk->enable_shift);
+ writel_relaxed(reg, clk->enable_reg);
+}
+
+struct divider {
+ struct clk *clk;
+ void __iomem *reg;
+ u32 bp_pred;
+ u32 bm_pred;
+ u32 bp_podf;
+ u32 bm_podf;
+};
+
+#define DEF_CLK_DIV1(d, c, r, b) \
+ static struct divider d = { \
+ .clk = c, \
+ .reg = r, \
+ .bp_podf = BP_##r##_##b##_PODF, \
+ .bm_podf = BM_##r##_##b##_PODF, \
+ }
+
+DEF_CLK_DIV1(arm_div, &arm_clk, CACRR, ARM);
+DEF_CLK_DIV1(ipg_div, &ipg_clk, CBCDR, IPG);
+DEF_CLK_DIV1(ahb_div, &ahb_clk, CBCDR, AHB);
+DEF_CLK_DIV1(axi_div, &axi_clk, CBCDR, AXI);
+DEF_CLK_DIV1(mmdc_ch0_axi_div, &mmdc_ch0_axi_clk, CBCDR, MMDC_CH0_AXI);
+DEF_CLK_DIV1(mmdc_ch1_axi_div, &mmdc_ch1_axi_clk, CBCDR, MMDC_CH1_AXI);
+DEF_CLK_DIV1(periph_clk2_div, &periph_clk2_clk, CBCDR, PERIPH_CLK2);
+DEF_CLK_DIV1(periph2_clk2_div, &periph2_clk2_clk, CBCDR, PERIPH2_CLK2);
+DEF_CLK_DIV1(gpu2d_core_div, &gpu2d_core_clk, CBCMR, GPU2D_CORE);
+DEF_CLK_DIV1(gpu3d_core_div, &gpu3d_core_clk, CBCMR, GPU3D_CORE);
+DEF_CLK_DIV1(gpu3d_shader_div, &gpu3d_shader_clk, CBCMR, GPU3D_SHADER);
+DEF_CLK_DIV1(ipg_perclk_div, &ipg_perclk, CSCMR1, PERCLK);
+DEF_CLK_DIV1(emi_div, &emi_clk, CSCMR1, EMI);
+DEF_CLK_DIV1(emi_slow_div, &emi_slow_clk, CSCMR1, EMI_SLOW);
+DEF_CLK_DIV1(can_div, &can1_clk, CSCMR2, CAN);
+DEF_CLK_DIV1(uart_div, &uart_clk, CSCDR1, UART);
+DEF_CLK_DIV1(usdhc1_div, &usdhc1_clk, CSCDR1, USDHC1);
+DEF_CLK_DIV1(usdhc2_div, &usdhc2_clk, CSCDR1, USDHC2);
+DEF_CLK_DIV1(usdhc3_div, &usdhc3_clk, CSCDR1, USDHC3);
+DEF_CLK_DIV1(usdhc4_div, &usdhc4_clk, CSCDR1, USDHC4);
+DEF_CLK_DIV1(vpu_div, &vpu_clk, CSCDR1, VPU_AXI);
+DEF_CLK_DIV1(hsi_tx_div, &hsi_tx_clk, CDCDR, HSI_TX);
+DEF_CLK_DIV1(ipu1_di0_pre_div, &ipu1_di0_pre_clk, CHSCCDR, IPU1_DI0_PRE);
+DEF_CLK_DIV1(ipu1_di1_pre_div, &ipu1_di1_pre_clk, CHSCCDR, IPU1_DI1_PRE);
+DEF_CLK_DIV1(ipu2_di0_pre_div, &ipu2_di0_pre_clk, CSCDR2, IPU2_DI0_PRE);
+DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE);
+DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP);
+DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP);
+
+#define DEF_CLK_DIV2(d, c, r, b) \
+ static struct divider d = { \
+ .clk = c, \
+ .reg = r, \
+ .bp_pred = BP_##r##_##b##_PRED, \
+ .bm_pred = BM_##r##_##b##_PRED, \
+ .bp_podf = BP_##r##_##b##_PODF, \
+ .bm_podf = BM_##r##_##b##_PODF, \
+ }
+
+DEF_CLK_DIV2(ssi1_div, &ssi1_clk, CS1CDR, SSI1);
+DEF_CLK_DIV2(ssi3_div, &ssi3_clk, CS1CDR, SSI3);
+DEF_CLK_DIV2(esai_div, &esai_clk, CS1CDR, ESAI);
+DEF_CLK_DIV2(ssi2_div, &ssi2_clk, CS2CDR, SSI2);
+DEF_CLK_DIV2(enfc_div, &enfc_clk, CS2CDR, ENFC);
+DEF_CLK_DIV2(spdif_div, &spdif_clk, CDCDR, SPDIF);
+DEF_CLK_DIV2(asrc_serial_div, &asrc_serial_clk, CDCDR, ASRC_SERIAL);
+
+static struct divider *dividers[] = {
+ &arm_div,
+ &ipg_div,
+ &ahb_div,
+ &axi_div,
+ &mmdc_ch0_axi_div,
+ &mmdc_ch1_axi_div,
+ &periph_clk2_div,
+ &periph2_clk2_div,
+ &gpu2d_core_div,
+ &gpu3d_core_div,
+ &gpu3d_shader_div,
+ &ipg_perclk_div,
+ &emi_div,
+ &emi_slow_div,
+ &can_div,
+ &uart_div,
+ &usdhc1_div,
+ &usdhc2_div,
+ &usdhc3_div,
+ &usdhc4_div,
+ &vpu_div,
+ &hsi_tx_div,
+ &ipu1_di0_pre_div,
+ &ipu1_di1_pre_div,
+ &ipu2_di0_pre_div,
+ &ipu2_di1_pre_div,
+ &ipu1_div,
+ &ipu2_div,
+ &ssi1_div,
+ &ssi3_div,
+ &esai_div,
+ &ssi2_div,
+ &enfc_div,
+ &spdif_div,
+ &asrc_serial_div,
+};
+
+static unsigned long ldb_di_clk_get_rate(struct clk *clk)
+{
+ u32 val = readl_relaxed(CSCMR2);
+
+ val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
+ BM_CSCMR2_LDB_DI1_IPU_DIV;
+ if (val)
+ return clk_get_rate(clk->parent) / 7;
+ else
+ return clk_get_rate(clk->parent) * 2 / 7;
+}
+
+static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 val = readl_relaxed(CSCMR2);
+
+ if (rate * 7 <= parent_rate + parent_rate / 20)
+ val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
+ else
+ val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
+
+ writel_relaxed(val, CSCMR2);
+
+ return 0;
+}
+
+static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+
+ if (rate * 7 <= parent_rate + parent_rate / 20)
+ return parent_rate / 7;
+ else
+ return 2 * parent_rate / 7;
+}
+
+static unsigned long _clk_get_rate(struct clk *clk)
+{
+ struct divider *d;
+ u32 val, pred, podf;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_get_rate(clk);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return clk_get_rate(clk->parent);
+
+ val = readl_relaxed(d->reg);
+ pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
+ podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
+
+ return clk_get_rate(clk->parent) / (pred * podf);
+}
+
+static int clk_busy_wait(struct clk *clk)
+{
+ int timeout = 0x100000;
+ u32 bm;
+
+ if (clk == &axi_clk)
+ bm = BM_CDHIPR_AXI_PODF_BUSY;
+ else if (clk == &ahb_clk)
+ bm = BM_CDHIPR_AHB_PODF_BUSY;
+ else if (clk == &mmdc_ch0_axi_clk)
+ bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
+ else if (clk == &periph_clk)
+ bm = BM_CDHIPR_PERIPH_SEL_BUSY;
+ else if (clk == &arm_clk)
+ bm = BM_CDHIPR_ARM_PODF_BUSY;
+ else
+ return -EINVAL;
+
+ while ((readl_relaxed(CDHIPR) & bm) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ return -EBUSY;
+
+ return 0;
+}
+
+static int _clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ struct divider *d;
+ u32 val, div, max_div, pred = 0, podf;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_set_rate(clk, rate);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ max_div = ((d->bm_pred >> d->bp_pred) + 1) *
+ ((d->bm_pred >> d->bp_pred) + 1);
+
+ div = parent_rate / rate;
+ if (div == 0)
+ div++;
+
+ if ((parent_rate / div != rate) || div > max_div)
+ return -EINVAL;
+
+ if (d->bm_pred) {
+ calc_pred_podf_dividers(div, &pred, &podf);
+ } else {
+ pred = 1;
+ podf = div;
+ }
+
+ val = readl_relaxed(d->reg);
+ val &= ~(d->bm_pred | d->bm_podf);
+ val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
+ writel_relaxed(val, d->reg);
+
+ if (clk == &axi_clk || clk == &ahb_clk ||
+ clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
+ return clk_busy_wait(clk);
+
+ return 0;
+}
+
+static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 div = parent_rate / rate;
+ u32 div_max, pred = 0, podf;
+ struct divider *d;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_round_rate(clk, rate);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ if (div == 0 || parent_rate % rate)
+ div++;
+
+ if (d->bm_pred) {
+ calc_pred_podf_dividers(div, &pred, &podf);
+ div = pred * podf;
+ } else {
+ div_max = (d->bm_podf >> d->bp_podf) + 1;
+ if (div > div_max)
+ div = div_max;
+ }
+
+ return parent_rate / div;
+}
+
+struct multiplexer {
+ struct clk *clk;
+ void __iomem *reg;
+ u32 bp;
+ u32 bm;
+ int pnum;
+ struct clk *parents[];
+};
+
+static struct multiplexer axi_mux = {
+ .clk = &axi_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_AXI_SEL,
+ .bm = BM_CBCDR_AXI_SEL,
+ .parents = {
+ &periph_clk,
+ &pll2_pfd_400m,
+ &pll3_pfd_540m,
+ NULL
+ },
+};
+
+static struct multiplexer periph_mux = {
+ .clk = &periph_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_PERIPH_CLK_SEL,
+ .bm = BM_CBCDR_PERIPH_CLK_SEL,
+ .parents = {
+ &periph_pre_clk,
+ &periph_clk2_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph_pre_mux = {
+ .clk = &periph_pre_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
+ .bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
+ .parents = {
+ &pll2_bus,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ &pll2_200m,
+ NULL
+ },
+};
+
+static struct multiplexer periph_clk2_mux = {
+ .clk = &periph_clk2_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PERIPH_CLK2_SEL,
+ .bm = BM_CBCMR_PERIPH_CLK2_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &osc_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_mux = {
+ .clk = &periph2_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_PERIPH2_CLK_SEL,
+ .bm = BM_CBCDR_PERIPH2_CLK_SEL,
+ .parents = {
+ &periph2_pre_clk,
+ &periph2_clk2_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_pre_mux = {
+ .clk = &periph2_pre_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
+ .bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
+ .parents = {
+ &pll2_bus,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ &pll2_200m,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_clk2_mux = {
+ .clk = &periph2_clk2_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PERIPH2_CLK2_SEL,
+ .bm = BM_CBCMR_PERIPH2_CLK2_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &osc_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu2d_axi_mux = {
+ .clk = &gpu2d_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU2D_AXI_SEL,
+ .bm = BM_CBCMR_GPU2D_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_axi_mux = {
+ .clk = &gpu3d_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_AXI_SEL,
+ .bm = BM_CBCMR_GPU3D_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_core_mux = {
+ .clk = &gpu3d_core_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_CORE_SEL,
+ .bm = BM_CBCMR_GPU3D_CORE_SEL,
+ .parents = {
+ &mmdc_ch0_axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_594m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_shader_mux = {
+ .clk = &gpu3d_shader_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_SHADER_SEL,
+ .bm = BM_CBCMR_GPU3D_SHADER_SEL,
+ .parents = {
+ &mmdc_ch0_axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_594m,
+ &pll3_pfd_720m,
+ NULL
+ },
+};
+
+static struct multiplexer pcie_axi_mux = {
+ .clk = &pcie_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PCIE_AXI_SEL,
+ .bm = BM_CBCMR_PCIE_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer vdo_axi_mux = {
+ .clk = &vdo_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_VDO_AXI_SEL,
+ .bm = BM_CBCMR_VDO_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer vpu_axi_mux = {
+ .clk = &vpu_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_VPU_AXI_SEL,
+ .bm = BM_CBCMR_VPU_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer gpu2d_core_mux = {
+ .clk = &gpu2d_core_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU2D_CORE_SEL,
+ .bm = BM_CBCMR_GPU2D_CORE_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_352m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+#define DEF_SSI_MUX(id) \
+ static struct multiplexer ssi##id##_mux = { \
+ .clk = &ssi##id##_clk, \
+ .reg = CSCMR1, \
+ .bp = BP_CSCMR1_SSI##id##_SEL, \
+ .bm = BM_CSCMR1_SSI##id##_SEL, \
+ .parents = { \
+ &pll3_pfd_508m, \
+ &pll3_pfd_454m, \
+ &pll4_audio, \
+ NULL \
+ }, \
+ }
+
+DEF_SSI_MUX(1);
+DEF_SSI_MUX(2);
+DEF_SSI_MUX(3);
+
+#define DEF_USDHC_MUX(id) \
+ static struct multiplexer usdhc##id##_mux = { \
+ .clk = &usdhc##id##_clk, \
+ .reg = CSCMR1, \
+ .bp = BP_CSCMR1_USDHC##id##_SEL, \
+ .bm = BM_CSCMR1_USDHC##id##_SEL, \
+ .parents = { \
+ &pll2_pfd_400m, \
+ &pll2_pfd_352m, \
+ NULL \
+ }, \
+ }
+
+DEF_USDHC_MUX(1);
+DEF_USDHC_MUX(2);
+DEF_USDHC_MUX(3);
+DEF_USDHC_MUX(4);
+
+static struct multiplexer emi_mux = {
+ .clk = &emi_clk,
+ .reg = CSCMR1,
+ .bp = BP_CSCMR1_EMI_SEL,
+ .bm = BM_CSCMR1_EMI_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer emi_slow_mux = {
+ .clk = &emi_slow_clk,
+ .reg = CSCMR1,
+ .bp = BP_CSCMR1_EMI_SLOW_SEL,
+ .bm = BM_CSCMR1_EMI_SLOW_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer esai_mux = {
+ .clk = &esai_clk,
+ .reg = CSCMR2,
+ .bp = BP_CSCMR2_ESAI_SEL,
+ .bm = BM_CSCMR2_ESAI_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+#define DEF_LDB_DI_MUX(id) \
+ static struct multiplexer ldb_di##id##_mux = { \
+ .clk = &ldb_di##id##_clk, \
+ .reg = CS2CDR, \
+ .bp = BP_CS2CDR_LDB_DI##id##_SEL, \
+ .bm = BM_CS2CDR_LDB_DI##id##_SEL, \
+ .parents = { \
+ &pll5_video, \
+ &pll2_pfd_352m, \
+ &pll2_pfd_400m, \
+ &pll3_pfd_540m, \
+ &pll3_usb_otg, \
+ NULL \
+ }, \
+ }
+
+DEF_LDB_DI_MUX(0);
+DEF_LDB_DI_MUX(1);
+
+static struct multiplexer enfc_mux = {
+ .clk = &enfc_clk,
+ .reg = CS2CDR,
+ .bp = BP_CS2CDR_ENFC_SEL,
+ .bm = BM_CS2CDR_ENFC_SEL,
+ .parents = {
+ &pll2_pfd_352m,
+ &pll2_bus,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+static struct multiplexer spdif_mux = {
+ .clk = &spdif_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_SPDIF_SEL,
+ .bm = BM_CDCDR_SPDIF_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+static struct multiplexer asrc_serial_mux = {
+ .clk = &asrc_serial_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_ASRC_SERIAL_SEL,
+ .bm = BM_CDCDR_ASRC_SERIAL_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+static struct multiplexer hsi_tx_mux = {
+ .clk = &hsi_tx_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_HSI_TX_SEL,
+ .bm = BM_CDCDR_HSI_TX_SEL,
+ .parents = {
+ &pll3_120m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+#define DEF_IPU_DI_PRE_MUX(r, i, d) \
+ static struct multiplexer ipu##i##_di##d##_pre_mux = { \
+ .clk = &ipu##i##_di##d##_pre_clk, \
+ .reg = r, \
+ .bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL, \
+ .bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL, \
+ .parents = { \
+ &mmdc_ch0_axi_clk, \
+ &pll3_usb_otg, \
+ &pll5_video, \
+ &pll2_pfd_352m, \
+ &pll2_pfd_400m, \
+ &pll3_pfd_540m, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_DI_MUX(r, i, d) \
+ static struct multiplexer ipu##i##_di##d##_mux = { \
+ .clk = &ipu##i##_di##d##_clk, \
+ .reg = r, \
+ .bp = BP_##r##_IPU##i##_DI##d##_SEL, \
+ .bm = BM_##r##_IPU##i##_DI##d##_SEL, \
+ .parents = { \
+ &ipu##i##_di##d##_pre_clk, \
+ &dummy_clk, \
+ &dummy_clk, \
+ &ldb_di0_clk, \
+ &ldb_di1_clk, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_MUX(id) \
+ static struct multiplexer ipu##id##_mux = { \
+ .clk = &ipu##id##_clk, \
+ .reg = CSCDR3, \
+ .bp = BP_CSCDR3_IPU##id##_HSP_SEL, \
+ .bm = BM_CSCDR3_IPU##id##_HSP_SEL, \
+ .parents = { \
+ &mmdc_ch0_axi_clk, \
+ &pll2_pfd_400m, \
+ &pll3_120m, \
+ &pll3_pfd_540m, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_MUX(1);
+DEF_IPU_MUX(2);
+
+static struct multiplexer *multiplexers[] = {
+ &axi_mux,
+ &periph_mux,
+ &periph_pre_mux,
+ &periph_clk2_mux,
+ &periph2_mux,
+ &periph2_pre_mux,
+ &periph2_clk2_mux,
+ &gpu2d_axi_mux,
+ &gpu3d_axi_mux,
+ &gpu3d_core_mux,
+ &gpu3d_shader_mux,
+ &pcie_axi_mux,
+ &vdo_axi_mux,
+ &vpu_axi_mux,
+ &gpu2d_core_mux,
+ &ssi1_mux,
+ &ssi2_mux,
+ &ssi3_mux,
+ &usdhc1_mux,
+ &usdhc2_mux,
+ &usdhc3_mux,
+ &usdhc4_mux,
+ &emi_mux,
+ &emi_slow_mux,
+ &esai_mux,
+ &ldb_di0_mux,
+ &ldb_di1_mux,
+ &enfc_mux,
+ &spdif_mux,
+ &asrc_serial_mux,
+ &hsi_tx_mux,
+ &ipu1_di0_pre_mux,
+ &ipu1_di0_mux,
+ &ipu1_di1_pre_mux,
+ &ipu1_di1_mux,
+ &ipu2_di0_pre_mux,
+ &ipu2_di0_mux,
+ &ipu2_di1_pre_mux,
+ &ipu2_di1_mux,
+ &ipu1_mux,
+ &ipu2_mux,
+};
+
+static int _clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct multiplexer *m;
+ int i, num;
+ u32 val;
+
+ num = ARRAY_SIZE(multiplexers);
+ for (i = 0; i < num; i++)
+ if (multiplexers[i]->clk == clk) {
+ m = multiplexers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ i = 0;
+ while (m->parents[i]) {
+ if (parent == m->parents[i])
+ break;
+ i++;
+ }
+ if (!m->parents[i])
+ return -EINVAL;
+
+ val = readl_relaxed(m->reg);
+ val &= ~m->bm;
+ val |= i << m->bp;
+ writel_relaxed(val, m->reg);
+
+ if (clk == &periph_clk)
+ return clk_busy_wait(clk);
+
+ return 0;
+}
+
+#define DEF_NG_CLK(name, p) \
+ static struct clk name = { \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ }
+
+DEF_NG_CLK(periph_clk2_clk, &osc_clk);
+DEF_NG_CLK(periph_pre_clk, &pll2_bus);
+DEF_NG_CLK(periph_clk, &periph_pre_clk);
+DEF_NG_CLK(periph2_clk2_clk, &osc_clk);
+DEF_NG_CLK(periph2_pre_clk, &pll2_bus);
+DEF_NG_CLK(periph2_clk, &periph2_pre_clk);
+DEF_NG_CLK(axi_clk, &periph_clk);
+DEF_NG_CLK(emi_clk, &axi_clk);
+DEF_NG_CLK(arm_clk, &pll1_sw_clk);
+DEF_NG_CLK(ahb_clk, &periph_clk);
+DEF_NG_CLK(ipg_clk, &ahb_clk);
+DEF_NG_CLK(ipg_perclk, &ipg_clk);
+DEF_NG_CLK(ipu1_di0_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu1_di1_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di0_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di1_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(asrc_serial_clk, &pll3_usb_otg);
+
+#define DEF_CLK(name, er, es, p, s) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = _clk_enable, \
+ .disable = _clk_disable, \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL);
+DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL);
+DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL);
+DEF_CLK(asrc_clk, CCGR0, CG3, &pll4_audio, NULL);
+DEF_CLK(can1_serial_clk, CCGR0, CG8, &pll3_usb_otg, NULL);
+DEF_CLK(can1_clk, CCGR0, CG7, &pll3_usb_otg, &can1_serial_clk);
+DEF_CLK(can2_serial_clk, CCGR0, CG10, &pll3_usb_otg, NULL);
+DEF_CLK(can2_clk, CCGR0, CG9, &pll3_usb_otg, &can2_serial_clk);
+DEF_CLK(ecspi1_clk, CCGR1, CG0, &pll3_60m, NULL);
+DEF_CLK(ecspi2_clk, CCGR1, CG1, &pll3_60m, NULL);
+DEF_CLK(ecspi3_clk, CCGR1, CG2, &pll3_60m, NULL);
+DEF_CLK(ecspi4_clk, CCGR1, CG3, &pll3_60m, NULL);
+DEF_CLK(ecspi5_clk, CCGR1, CG4, &pll3_60m, NULL);
+DEF_CLK(enet_clk, CCGR1, CG5, &ipg_clk, NULL);
+DEF_CLK(esai_clk, CCGR1, CG8, &pll3_usb_otg, NULL);
+DEF_CLK(gpt_serial_clk, CCGR1, CG11, &ipg_perclk, NULL);
+DEF_CLK(gpt_clk, CCGR1, CG10, &ipg_perclk, &gpt_serial_clk);
+DEF_CLK(gpu2d_core_clk, CCGR1, CG12, &pll2_pfd_352m, &gpu2d_axi_clk);
+DEF_CLK(gpu3d_core_clk, CCGR1, CG13, &pll2_pfd_594m, &gpu3d_axi_clk);
+DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m, &gpu3d_axi_clk);
+DEF_CLK(hdmi_iahb_clk, CCGR2, CG0, &ahb_clk, NULL);
+DEF_CLK(hdmi_isfr_clk, CCGR2, CG2, &pll3_pfd_540m, &hdmi_iahb_clk);
+DEF_CLK(i2c1_clk, CCGR2, CG3, &ipg_perclk, NULL);
+DEF_CLK(i2c2_clk, CCGR2, CG4, &ipg_perclk, NULL);
+DEF_CLK(i2c3_clk, CCGR2, CG5, &ipg_perclk, NULL);
+DEF_CLK(iim_clk, CCGR2, CG6, &ipg_clk, NULL);
+DEF_CLK(enfc_clk, CCGR2, CG7, &pll2_pfd_352m, NULL);
+DEF_CLK(ipu1_clk, CCGR3, CG0, &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu1_di0_clk, CCGR3, CG1, &ipu1_di0_pre_clk, NULL);
+DEF_CLK(ipu1_di1_clk, CCGR3, CG2, &ipu1_di1_pre_clk, NULL);
+DEF_CLK(ipu2_clk, CCGR3, CG3, &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu2_di0_clk, CCGR3, CG4, &ipu2_di0_pre_clk, NULL);
+DEF_CLK(ipu2_di1_clk, CCGR3, CG5, &ipu2_di1_pre_clk, NULL);
+DEF_CLK(ldb_di0_clk, CCGR3, CG6, &pll3_pfd_540m, NULL);
+DEF_CLK(ldb_di1_clk, CCGR3, CG7, &pll3_pfd_540m, NULL);
+DEF_CLK(hsi_tx_clk, CCGR3, CG8, &pll2_pfd_400m, NULL);
+DEF_CLK(mlb_clk, CCGR3, CG9, &pll6_mlb, NULL);
+DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk, NULL);
+DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk, &mmdc_ch0_ipg_clk);
+DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk, NULL);
+DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk, &mmdc_ch1_ipg_clk);
+DEF_CLK(openvg_axi_clk, CCGR3, CG13, &axi_clk, NULL);
+DEF_CLK(pwm1_clk, CCGR4, CG8, &ipg_perclk, NULL);
+DEF_CLK(pwm2_clk, CCGR4, CG9, &ipg_perclk, NULL);
+DEF_CLK(pwm3_clk, CCGR4, CG10, &ipg_perclk, NULL);
+DEF_CLK(pwm4_clk, CCGR4, CG11, &ipg_perclk, NULL);
+DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk, NULL);
+DEF_CLK(gpmi_bch_clk, CCGR4, CG13, &usdhc4_clk, &gpmi_bch_apb_clk);
+DEF_CLK(gpmi_apb_clk, CCGR4, CG15, &usdhc3_clk, &gpmi_bch_clk);
+DEF_CLK(gpmi_io_clk, CCGR4, CG14, &enfc_clk, &gpmi_apb_clk);
+DEF_CLK(sdma_clk, CCGR5, CG3, &ahb_clk, NULL);
+DEF_CLK(spba_clk, CCGR5, CG6, &ipg_clk, NULL);
+DEF_CLK(spdif_clk, CCGR5, CG7, &pll3_usb_otg, &spba_clk);
+DEF_CLK(ssi1_clk, CCGR5, CG9, &pll3_pfd_508m, NULL);
+DEF_CLK(ssi2_clk, CCGR5, CG10, &pll3_pfd_508m, NULL);
+DEF_CLK(ssi3_clk, CCGR5, CG11, &pll3_pfd_508m, NULL);
+DEF_CLK(uart_serial_clk, CCGR5, CG13, &pll3_usb_otg, NULL);
+DEF_CLK(uart_clk, CCGR5, CG12, &pll3_80m, &uart_serial_clk);
+DEF_CLK(usboh3_clk, CCGR6, CG0, &ipg_clk, NULL);
+DEF_CLK(usdhc1_clk, CCGR6, CG1, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc2_clk, CCGR6, CG2, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc3_clk, CCGR6, CG3, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc4_clk, CCGR6, CG4, &pll2_pfd_400m, NULL);
+DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL);
+DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL);
+DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL);
+
+static int pcie_clk_enable(struct clk *clk)
+{
+ u32 val;
+
+ val = readl_relaxed(PLL8_ENET);
+ val |= BM_PLL_ENET_EN_PCIE;
+ writel_relaxed(val, PLL8_ENET);
+
+ return _clk_enable(clk);
+}
+
+static void pcie_clk_disable(struct clk *clk)
+{
+ u32 val;
+
+ _clk_disable(clk);
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= BM_PLL_ENET_EN_PCIE;
+ writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk pcie_clk = {
+ .enable_reg = CCGR4,
+ .enable_shift = CG0,
+ .enable = pcie_clk_enable,
+ .disable = pcie_clk_disable,
+ .set_parent = _clk_set_parent,
+ .parent = &axi_clk,
+ .secondary = &pll8_enet,
+};
+
+static int sata_clk_enable(struct clk *clk)
+{
+ u32 val;
+
+ val = readl_relaxed(PLL8_ENET);
+ val |= BM_PLL_ENET_EN_SATA;
+ writel_relaxed(val, PLL8_ENET);
+
+ return _clk_enable(clk);
+}
+
+static void sata_clk_disable(struct clk *clk)
+{
+ u32 val;
+
+ _clk_disable(clk);
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= BM_PLL_ENET_EN_SATA;
+ writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk sata_clk = {
+ .enable_reg = CCGR5,
+ .enable_shift = CG2,
+ .enable = sata_clk_enable,
+ .disable = sata_clk_disable,
+ .parent = &ipg_clk,
+ .secondary = &pll8_enet,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ }
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
+ _REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
+ _REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
+ _REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
+ _REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
+ _REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
+ _REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
+ _REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
+ _REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
+ _REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
+ _REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
+ _REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
+ _REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
+ _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
+ _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
+ _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+ _REGISTER_CLOCK(NULL, "ckih", ckih_clk),
+ _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
+ _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
+ _REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
+ _REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
+ _REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
+ _REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
+ _REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
+ _REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
+ _REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
+ _REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
+ _REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
+ _REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
+ _REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
+ _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
+ _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
+ _REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+};
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+ u32 val = readl_relaxed(CLPCR);
+
+ val &= ~BM_CLPCR_LPM;
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ val |= 0x1 << BP_CLPCR_LPM;
+ break;
+ case STOP_POWER_ON:
+ val |= 0x2 << BP_CLPCR_LPM;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ val |= 0x1 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+ break;
+ case STOP_POWER_OFF:
+ val |= 0x2 << BP_CLPCR_LPM;
+ val |= 0x3 << BP_CLPCR_STBY_COUNT;
+ val |= BM_CLPCR_VSTBY;
+ val |= BM_CLPCR_SBYOS;
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+ break;
+ default:
+ return -EINVAL;
+ }
+ writel_relaxed(val, CLPCR);
+
+ return 0;
+}
+
+static struct map_desc imx6q_clock_desc[] = {
+ imx_map_entry(MX6Q, CCM, MT_DEVICE),
+ imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
+};
+
+int __init mx6q_clocks_init(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i, irq;
+
+ iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ external_low_reference = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ external_high_reference = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ oscillator_reference = rate;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* only keep necessary clocks on */
+ writel_relaxed(0x3 << CG0 | 0x3 << CG1 | 0x3 << CG2, CCGR0);
+ writel_relaxed(0x3 << CG8 | 0x3 << CG9 | 0x3 << CG10, CCGR2);
+ writel_relaxed(0x3 << CG10 | 0x3 << CG12, CCGR3);
+ writel_relaxed(0x3 << CG4 | 0x3 << CG6 | 0x3 << CG7, CCGR4);
+ writel_relaxed(0x3 << CG0, CCGR5);
+ writel_relaxed(0, CCGR6);
+ writel_relaxed(0, CCGR7);
+
+ clk_enable(&uart_clk);
+ clk_enable(&mmdc_ch0_axi_clk);
+
+ clk_set_rate(&pll4_audio, FREQ_650M);
+ clk_set_rate(&pll5_video, FREQ_650M);
+ clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
+ clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
+ clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
+ clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
+ clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
+ clk_set_rate(&gpu3d_core_clk, FREQ_528M);
+ clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
+ clk_set_rate(&asrc_serial_clk, 1500000);
+ clk_set_rate(&enfc_clk, 11000000);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+ mxc_timer_init(&gpt_clk, base, irq);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
new file mode 100644
index 0000000..6914bcb
--- /dev/null
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -0,0 +1,41 @@
+/*
+ * MX25 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+static int mx25_cpu_rev = -1;
+
+static int mx25_read_cpu_rev(void)
+{
+ u32 rev;
+
+ rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
+ switch (rev) {
+ case 0x00:
+ return IMX_CHIP_REVISION_1_0;
+ case 0x01:
+ return IMX_CHIP_REVISION_1_1;
+ default:
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
+}
+
+int mx25_revision(void)
+{
+ if (mx25_cpu_rev == -1)
+ mx25_cpu_rev = mx25_read_cpu_rev();
+
+ return mx25_cpu_rev;
+}
+EXPORT_SYMBOL(mx25_revision);
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index 3b117be..ff38e15 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -26,12 +26,12 @@
#include <mach/hardware.h>
-static int cpu_silicon_rev = -1;
-static int cpu_partnumber;
+static int mx27_cpu_rev = -1;
+static int mx27_cpu_partnumber;
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
-static void query_silicon_parameter(void)
+static int mx27_read_cpu_rev(void)
{
u32 val;
/*
@@ -42,20 +42,18 @@
val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ SYS_CHIP_ID));
+ mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+
switch (val >> 28) {
case 0:
- cpu_silicon_rev = IMX_CHIP_REVISION_1_0;
- break;
+ return IMX_CHIP_REVISION_1_0;
case 1:
- cpu_silicon_rev = IMX_CHIP_REVISION_2_0;
- break;
+ return IMX_CHIP_REVISION_2_0;
case 2:
- cpu_silicon_rev = IMX_CHIP_REVISION_2_1;
- break;
+ return IMX_CHIP_REVISION_2_1;
default:
- cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN;
+ return IMX_CHIP_REVISION_UNKNOWN;
}
- cpu_partnumber = (int)((val >> 12) & 0xFFFF);
}
/*
@@ -65,12 +63,12 @@
*/
int mx27_revision(void)
{
- if (cpu_silicon_rev == -1)
- query_silicon_parameter();
+ if (mx27_cpu_rev == -1)
+ mx27_cpu_rev = mx27_read_cpu_rev();
- if (cpu_partnumber != 0x8821)
+ if (mx27_cpu_partnumber != 0x8821)
return -EINVAL;
- return cpu_silicon_rev;
+ return mx27_cpu_rev;
}
EXPORT_SYMBOL(mx27_revision);
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index a378070..3f2345f 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -13,45 +13,50 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/iim.h>
+#include <mach/common.h>
-unsigned int mx31_cpu_rev;
-EXPORT_SYMBOL(mx31_cpu_rev);
+static int mx31_cpu_rev = -1;
static struct {
u8 srev;
const char *name;
- const char *v;
unsigned int rev;
-} mx31_cpu_type[] __initdata = {
- { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 },
- { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
- { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
- { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
- { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
+} mx31_cpu_type[] = {
+ { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 },
+ { .srev = 0x10, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x11, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x12, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x13, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x14, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x15, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x28, .name = "i.MX31", .rev = IMX_CHIP_REVISION_2_0 },
+ { .srev = 0x29, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_2_0 },
};
-void __init mx31_read_cpu_rev(void)
+static int mx31_read_cpu_rev(void)
{
u32 i, srev;
/* read SREV register from IIM module */
srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+ srev &= 0xff;
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
- printk(KERN_INFO
- "CPU identified as %s, silicon rev %s\n",
- mx31_cpu_type[i].name, mx31_cpu_type[i].v);
-
- mx31_cpu_rev = mx31_cpu_type[i].rev;
- return;
+ imx_print_silicon_rev(mx31_cpu_type[i].name,
+ mx31_cpu_type[i].rev);
+ return mx31_cpu_type[i].rev;
}
- mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-
- printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+ imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN);
+ return IMX_CHIP_REVISION_UNKNOWN;
}
+
+int mx31_revision(void)
+{
+ if (mx31_cpu_rev == -1)
+ mx31_cpu_rev = mx31_read_cpu_rev();
+
+ return mx31_cpu_rev;
+}
+EXPORT_SYMBOL(mx31_revision);
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index 6637cd8..846e46e 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -13,32 +13,30 @@
#include <mach/hardware.h>
#include <mach/iim.h>
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
+static int mx35_cpu_rev = -1;
-void __init mx35_read_cpu_rev(void)
+static int mx35_read_cpu_rev(void)
{
u32 rev;
- char *srev;
rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
switch (rev) {
case 0x00:
- mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
- srev = "1.0";
- break;
+ return IMX_CHIP_REVISION_1_0;
case 0x10:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
- srev = "2.0";
- break;
+ return IMX_CHIP_REVISION_2_0;
case 0x11:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
- srev = "2.1";
- break;
+ return IMX_CHIP_REVISION_2_1;
default:
- mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
- srev = "unknown";
+ return IMX_CHIP_REVISION_UNKNOWN;
}
-
- printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
}
+
+int mx35_revision(void)
+{
+ if (mx35_cpu_rev == -1)
+ mx35_cpu_rev = mx35_read_cpu_rev();
+
+ return mx35_cpu_rev;
+}
+EXPORT_SYMBOL(mx35_revision);
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 7f97a3c..2f727d7 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -76,3 +76,7 @@
#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata)
#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata)
#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx27_pata_imx_data;
+#define imx27_add_pata_imx() \
+ imx_add_pata_imx(&imx27_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index dbe940d..488e241 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -78,3 +78,7 @@
#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata)
#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata)
#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx31_pata_imx_data;
+#define imx31_add_pata_imx() \
+ imx_add_pata_imx(&imx31_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
index 234cbd3..7b99ef0 100644
--- a/arch/arm/mach-imx/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -81,3 +81,7 @@
imx_add_spi_imx(&imx35_cspi_data[id], pdata)
#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
+
+extern const struct imx_pata_imx_data imx35_pata_imx_data;
+#define imx35_add_pata_imx() \
+ imx_add_pata_imx(&imx35_pata_imx_data)
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
new file mode 100644
index 0000000..e1537f9
--- /dev/null
+++ b/arch/arm/mach-imx/gpc.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1 0x008
+#define GPC_PGC_CPU_PDN 0x2a0
+
+#define IMR_NUM 4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ /* Tell GPC to power off ARM core when suspend */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+ for (i = 0; i < IMR_NUM; i++) {
+ gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+ writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+ }
+}
+
+void imx_gpc_post_resume(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ /* Keep ARM core powered on for other low-power modes */
+ writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+ for (i = 0; i < IMR_NUM; i++)
+ writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ unsigned int idx = d->irq / 32 - 1;
+ u32 mask;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return -EINVAL;
+
+ mask = 1 << d->irq % 32;
+ gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+ gpc_wake_irqs[idx] & ~mask;
+
+ return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+ void __iomem *reg;
+ u32 val;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return;
+
+ reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+ val = readl_relaxed(reg);
+ val &= ~(1 << d->irq % 32);
+ writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+ void __iomem *reg;
+ u32 val;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return;
+
+ reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+ val = readl_relaxed(reg);
+ val |= 1 << (d->irq % 32);
+ writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+ gpc_base = of_iomap(np, 0);
+ WARN_ON(!gpc_base);
+
+ /* Register GPC as the secondary interrupt controller behind GIC */
+ gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+ gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+ gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
new file mode 100644
index 0000000..6229efb
--- /dev/null
+++ b/arch/arm/mach-imx/head-v7.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+ .section ".text.head", "ax"
+ __CPUINIT
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor. We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+ mov r0, #0
+ mcr p15, 2, r0, c0, c0, 0
+ mrc p15, 1, r0, c0, c0, 0
+
+ ldr r1, =0x7fff
+ and r2, r1, r0, lsr #13
+
+ ldr r1, =0x3ff
+
+ and r3, r1, r0, lsr #3 @ NumWays - 1
+ add r2, r2, #1 @ NumSets
+
+ and r0, r0, #0x7
+ add r0, r0, #4 @ SetShift
+
+ clz r1, r3 @ WayShift
+ add r4, r3, #1 @ NumWays
+1: sub r2, r2, #1 @ NumSets--
+ mov r3, r4 @ Temp = NumWays
+2: subs r3, r3, #1 @ Temp--
+ mov r5, r3, lsl r1
+ mov r6, r2, lsl r0
+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, r5, c7, c6, 2
+ bgt 2b
+ cmp r2, #0
+ bgt 1b
+ dsb
+ isb
+ mov pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+/*
+ * The following code is located into the .data section. This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+ .data
+ .align
+
+ .macro pl310_resume
+ ldr r2, phys_l2x0_saved_regs
+ ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
+ ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
+ str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
+ mov r1, #0x1
+ str r1, [r0, #L2X0_CTRL] @ re-enable L2
+ .endm
+
+ENTRY(v7_cpu_resume)
+ bl v7_invalidate_l1
+ pl310_resume
+ b cpu_resume
+ENDPROC(v7_cpu_resume)
+
+ .globl phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+ .long 0
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
new file mode 100644
index 0000000..89493ab
--- /dev/null
+++ b/arch/arm/mach-imx/hotplug.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <asm/cacheflush.h>
+#include <mach/common.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ flush_cache_all();
+ imx_enable_cpu(cpu, false);
+ cpu_do_idle();
+
+ /* We should never return from idle */
+ panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index cf8f809..82bd440 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -17,13 +17,12 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx3.h>
/*
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
new file mode 100644
index 0000000..d4ab6f2
--- /dev/null
+++ b/arch/arm/mach-imx/lluart.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+ .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
+ .length = MX6Q_UART4_SIZE,
+ .type = MT_DEVICE,
+#endif
+};
+
+void __init imx_lluart_map_io(void)
+{
+ if (imx_lluart_desc.virtual)
+ iotable_init(&imx_lluart_desc, 1);
+}
diff --git a/arch/arm/mach-imx/localtimer.c b/arch/arm/mach-imx/localtimer.c
new file mode 100644
index 0000000..3a16351
--- /dev/null
+++ b/arch/arm/mach-imx/localtimer.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+ if (!twd_base) {
+ twd_base = of_iomap(np, 0);
+ WARN_ON(!twd_base);
+ }
+ evt->irq = irq_of_parse_and_map(np, 0);
+ twd_timer_setup(evt);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index a404c89..1e486e6 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -136,6 +136,7 @@
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &apf9328_timer,
.init_machine = apf9328_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ede2710..c9a9cf6 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -314,25 +314,19 @@
},
};
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+static const struct physmap_flash_data
+ armadillo5x0_nor_flash_pdata __initconst = {
.width = 2,
.parts = armadillo5x0_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
};
-static struct resource armadillo5x0_nor_flash_resource = {
+static const struct resource armadillo5x0_nor_flash_resource __initconst = {
.flags = IORESOURCE_MEM,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
-static struct platform_device armadillo5x0_nor_flash = {
- .name = "physmap-flash",
- .id = -1,
- .num_resources = 1,
- .resource = &armadillo5x0_nor_flash_resource,
-};
-
/*
* FB support
*/
@@ -514,8 +508,10 @@
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* Register NOR Flash */
- mxc_register_device(&armadillo5x0_nor_flash,
- &armadillo5x0_nor_flash_pdata);
+ platform_device_register_resndata(NULL, "physmap-flash", -1,
+ &armadillo5x0_nor_flash_resource, 1,
+ &armadillo5x0_nor_flash_pdata,
+ sizeof(armadillo5x0_nor_flash_pdata));
/* Register NAND Flash */
imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
@@ -558,10 +554,11 @@
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &armadillo5x0_timer,
.init_machine = armadillo5x0_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index f494705..313f62d 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -62,6 +62,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &bug_timer,
.init_machine = bug_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index f851fe9..edb3730 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -311,10 +311,11 @@
};
MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &eukrea_cpuimx27_timer,
.init_machine = eukrea_cpuimx27_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 4bd083b..66af2e8 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -66,7 +66,7 @@
I2C_BOARD_INFO("tsc2007", 0x48),
.type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = gpio_to_irq(TSC2007_IRQGPIO),
+ .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
};
@@ -194,10 +194,11 @@
MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &eukrea_cpuimx35_timer,
.init_machine = eukrea_cpuimx35_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 2442d5d..ab8fbcc 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -163,10 +163,11 @@
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
+ .handle_irq = imx25_handle_irq,
.timer = &eukrea_cpuimx25_timer,
.init_machine = eukrea_cpuimx25_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6778f81..38eb9e4 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -275,10 +275,11 @@
};
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &visstrim_m10_timer,
.init_machine = visstrim_m10_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 272f793..7052155 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,10 +71,11 @@
MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27ipcam_timer,
.init_machine = mx27ipcam_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index d81a769f..8d6a635 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,10 +77,11 @@
};
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27lite_timer,
.init_machine = mx27lite_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
new file mode 100644
index 0000000..8bf5fa3
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+ imx_lluart_map_io();
+ imx_scu_map_io();
+}
+
+static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 7; /* imx6q gets 7 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+ l2x0_of_init(0, ~0UL);
+ imx_src_init();
+ imx_gpc_init();
+ of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+ mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+ .init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+ "fsl,imx6q-sabreauto",
+ NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+ .map_io = imx6q_map_io,
+ .init_irq = imx6q_init_irq,
+ .handle_irq = imx6q_handle_irq,
+ .timer = &imx6q_timer,
+ .init_machine = imx6q_init_machine,
+ .dt_compat = imx6q_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index e472a1d..5f37f89 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -36,6 +36,7 @@
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include "devices-imx31.h"
@@ -271,10 +272,11 @@
};
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &kzm_timer,
.init_machine = kzm_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 5cd8bee..fc49785 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -68,23 +68,16 @@
* Physmap flash
*/
-static struct physmap_flash_data mx1ads_flash_data = {
+static const struct physmap_flash_data mx1ads_flash_data __initconst = {
.width = 4, /* bankwidth in bytes */
};
-static struct resource flash_resource = {
+static const struct resource flash_resource __initconst = {
.start = MX1_CS0_PHYS,
.end = MX1_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
/*
* I2C
*/
@@ -125,7 +118,9 @@
imx1_add_imx_uart1(&uart1_pdata);
/* Physmap flash */
- mxc_register_device(&flash_device, &mx1ads_flash_data);
+ platform_device_register_resndata(NULL, "physmap-flash", 0,
+ &flash_resource, 1,
+ &mx1ads_flash_data, sizeof(mx1ads_flash_data));
/* I2C */
i2c_register_board_info(0, mx1ads_i2c_devices,
@@ -145,19 +140,21 @@
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d389ecf..25f8402 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -305,10 +305,11 @@
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX21_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx21ads_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
+ .handle_irq = imx21_handle_irq,
.timer = &mx21ads_timer,
.init_machine = mx21ads_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 7f66a91..88dccf1 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -43,6 +43,8 @@
#include "devices-imx25.h"
+#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -108,6 +110,11 @@
/* I2C1 */
MX25_PAD_I2C1_CLK__I2C1_CLK,
MX25_PAD_I2C1_DAT__I2C1_DAT,
+
+ /* CAN1 */
+ MX25_PAD_GPIO_A__CAN1_TX,
+ MX25_PAD_GPIO_B__CAN1_RX,
+ MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
@@ -240,6 +247,9 @@
imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
+
+ gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
+ imx25_add_flexcan0(NULL);
}
static void __init mx25pdk_timer_init(void)
@@ -253,10 +263,11 @@
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
+ .handle_irq = imx25_handle_irq,
.timer = &mx25pdk_timer,
.init_machine = mx25pdk_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6fa6934..ba232d7 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -241,7 +241,7 @@
};
static struct regulator_consumer_supply vmmc1_consumers[] = {
- REGULATOR_SUPPLY("lcd_2v8", NULL),
+ REGULATOR_SUPPLY("vcore", "spi0.0"),
};
static struct regulator_init_data vmmc1_init = {
@@ -257,7 +257,7 @@
};
static struct regulator_consumer_supply vgen_consumers[] = {
- REGULATOR_SUPPLY("vdd_lcdio", NULL),
+ REGULATOR_SUPPLY("vdd", "spi0.0"),
};
static struct regulator_init_data vgen_init = {
@@ -293,8 +293,7 @@
.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
- MC13783_USE_RTC,
+ .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
};
/* SPI */
@@ -348,8 +347,6 @@
static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = {
.reset_gpio = LCD_RESET,
.data_enable_gpio = LCD_ENABLE,
- .core_supply = "lcd_2v8",
- .io_supply = "vdd_lcdio",
};
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
@@ -359,7 +356,7 @@
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
- .irq = gpio_to_irq(PMIC_INT),
+ .irq = IMX_GPIO_TO_IRQ(PMIC_INT),
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -421,10 +418,11 @@
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27pdk_timer,
.init_machine = mx27pdk_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index fc26ed7..74dd573 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -13,7 +13,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@@ -27,7 +27,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
@@ -345,10 +344,11 @@
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27ads_timer,
.init_machine = mx27ads_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index c20be75..b8c54b8 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -285,8 +285,6 @@
static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
.reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1),
.data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS),
- .core_supply = "lcd_2v8",
- .io_supply = "vdd_lcdio",
};
/*
@@ -411,7 +409,7 @@
};
static struct regulator_consumer_supply vmmc1_consumers[] = {
- REGULATOR_SUPPLY("lcd_2v8", NULL),
+ REGULATOR_SUPPLY("vcore", "spi0.0"),
REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
};
@@ -428,7 +426,7 @@
};
static struct regulator_consumer_supply vgen_consumers[] = {
- REGULATOR_SUPPLY("vdd_lcdio", NULL),
+ REGULATOR_SUPPLY("vdd", "spi0.0"),
};
static struct regulator_init_data vgen_init = {
@@ -494,7 +492,7 @@
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
+ .flags = MC13XXX_USE_TOUCHSCREEN,
};
/* SPI */
@@ -542,7 +540,7 @@
mx31_3ds_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
-#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
.flash_bbt = 1,
#endif
};
@@ -764,10 +762,11 @@
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31_3ds_timer,
.init_machine = mx31_3ds_init,
.reserve = mx31_3ds_reserve,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 29ca890..9cc1a49 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -535,10 +535,11 @@
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31ads_timer,
.init_machine = mx31ads_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 126913a..5defd8e7 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -295,10 +295,11 @@
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31lilly_timer,
.init_machine = mx31lilly_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4b47fd9..05f1c71 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -112,8 +112,7 @@
};
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC |
- MC13XXX_USE_REGULATOR,
+ .flags = MC13XXX_USE_RTC,
};
static struct spi_board_info mc13783_spi_dev __initdata = {
@@ -280,10 +279,11 @@
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31lite_timer,
.init_machine = mx31lite_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b358383..07034f4 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -28,6 +28,10 @@
#include <linux/spi/spi.h>
#include <linux/types.h>
#include <linux/memblock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/input.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -222,7 +226,7 @@
},
};
-static struct mc13783_led_platform_data moboard_led[] = {
+static struct mc13xxx_led_platform_data moboard_led[] = {
{
.id = MC13783_LED_R1,
.name = "coreboard-led-4:red",
@@ -255,7 +259,7 @@
},
};
-static struct mc13783_leds_platform_data moboard_leds = {
+static struct mc13xxx_leds_platform_data moboard_leds = {
.num_leds = ARRAY_SIZE(moboard_led),
.led = moboard_led,
.flags = MC13783_LED_SLEWLIMTC,
@@ -264,14 +268,20 @@
.tc2_period = MC13783_LED_PERIOD_10MS,
};
+static struct mc13xxx_buttons_platform_data moboard_buttons = {
+ .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
+ MC13783_BUTTON_POL_INVERT,
+ .b1on_key = KEY_POWER,
+};
+
static struct mc13xxx_platform_data moboard_pmic = {
.regulators = {
.regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators),
},
.leds = &moboard_leds,
- .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
- MC13XXX_USE_ADC | MC13XXX_USE_LED,
+ .buttons = &moboard_buttons,
+ .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC,
};
static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -490,6 +500,18 @@
}
+static void mx31moboard_poweroff(void)
+{
+ struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
+
+ if (!IS_ERR(clk))
+ clk_enable(clk);
+
+ mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
+
+ __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
static int mx31moboard_baseboard;
core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
@@ -528,6 +550,8 @@
moboard_usbh2_init();
+ pm_power_off = mx31moboard_poweroff;
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
@@ -567,11 +591,12 @@
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = mx31moboard_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31moboard_timer,
.init_machine = mx31moboard_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index b3b9bd8..7a46202 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -217,10 +217,11 @@
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &mx35pdk_timer,
.init_machine = mx35_3ds_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index c85876f..125c196 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,10 +267,11 @@
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mxt_td60_timer,
.init_machine = mxt_td60_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 71083aa..26072f4 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -435,10 +435,11 @@
};
MACHINE_START(PCA100, "phyCARD-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.init_machine = pca100_init,
.timer = &pca100_timer,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index f45b7cd..efd6b53 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -688,11 +688,12 @@
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = pcm037_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &pcm037_timer,
.init_machine = pcm037_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 2d6a64b..a17e9c7 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -176,7 +176,9 @@
* setup other stuffs to access the sram. */
static void __init pcm038_init_sram(void)
{
- mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+ __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
+ __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
+ __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
}
static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
@@ -266,8 +268,7 @@
.regulators = pcm038_regulators,
.num_regulators = ARRAY_SIZE(pcm038_regulators),
},
- .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
- MC13783_USE_TOUCHSCREEN,
+ .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
};
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
@@ -349,10 +350,11 @@
};
MACHINE_START(PCM038, "phyCORE-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &pcm038_timer,
.init_machine = pcm038_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 660ec3e..7366c2a 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -418,10 +418,11 @@
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &pcm043_timer,
.init_machine = pcm043_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 3626f48..4ff5faf 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -190,7 +190,10 @@
static void __init qong_init_nand_mtd(void)
{
/* init CS */
- mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+ __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+ __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+ __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
@@ -249,6 +252,7 @@
mxc_init_imx_uart();
qong_init_nor_mtd();
qong_init_fpga();
+ imx31_add_imx2_wdt(NULL);
}
static void __init qong_timer_init(void)
@@ -262,10 +266,11 @@
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &qong_timer,
.init_machine = qong_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index db2d604..bb6e5b2 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,10 +137,11 @@
MACHINE_START(SCB9328, "Synertronixx scb9328")
/* Sascha Hauer */
- .boot_params = 0x08000100,
+ .atag_offset = 100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 7d8e012..6909245 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -162,7 +162,7 @@
}, {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &vpr200_pmic,
- .irq = gpio_to_irq(GPIO_PMIC_INT),
+ .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
}
};
@@ -319,6 +319,7 @@
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &vpr200_timer,
.init_machine = vpr200_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
new file mode 100644
index 0000000..9f0e82e
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/devices-common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/irqs.h>
+
+static void imx3_idle(void)
+{
+ unsigned long reg = 0;
+ __asm__ __volatile__(
+ /* disable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #0x00001000\n"
+ "bic %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ /* invalidate I cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c5, 0\n"
+ /* clear and invalidate D cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c14, 0\n"
+ /* WFI */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c0, 4\n"
+ "nop\n" "nop\n" "nop\n" "nop\n"
+ "nop\n" "nop\n" "nop\n"
+ /* enable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #0x00001000\n"
+ "orr %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : "=r" (reg));
+}
+
+static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
+ unsigned int mtype)
+{
+ if (mtype == MT_DEVICE) {
+ /*
+ * Access all peripherals below 0x80000000 as nonshared device
+ * on mx3, but leave l2cc alone. Otherwise cache corruptions
+ * can occur.
+ */
+ if (phys_addr < 0x80000000 &&
+ !addr_in_module(phys_addr, MX3x_L2CC))
+ mtype = MT_DEVICE_NONSHARED;
+ }
+
+ return __arm_ioremap(phys_addr, size, mtype);
+}
+
+void imx3_init_l2x0(void)
+{
+ void __iomem *l2x0_base;
+ void __iomem *clkctl_base;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+ clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+ if (clkctl_base != NULL) {
+ writel(0x00000515, clkctl_base + L2_MEM_VAL);
+ iounmap(clkctl_base);
+ } else {
+ pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+ }
+
+ l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+ if (IS_ERR(l2x0_base)) {
+ printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+ PTR_ERR(l2x0_base));
+ return;
+ }
+
+ l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+}
+
+static struct map_desc mx31_io_desc[] __initdata = {
+ imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+ iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+static struct map_desc mx35_io_desc[] __initdata = {
+ imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+ iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+ imx_idle = imx3_idle;
+ imx_ioremap = imx3_ioremap;
+}
+
+void __init imx35_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+ mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+ imx_idle = imx3_idle;
+ imx_ioremap = imx3_ioremap;
+}
+
+void __init mx31_init_irq(void)
+{
+ mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+ mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
+
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+ .per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 423,
+ .ap_2_bp_addr = 829,
+ .bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx31-to2.bin",
+ .script_addrs = &imx31_to2_sdma_script,
+};
+
+void __init imx31_soc_init(void)
+{
+ int to_version = mx31_revision() >> 4;
+
+ imx3_init_l2x0();
+
+ mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+ mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+ mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+ strlen(imx31_sdma_pdata.fw_name));
+ imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+}
+
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .uartsh_2_mcu_addr = 1183,
+ .per_2_shp_addr = 1033,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1333,
+ .mcu_2_ata_addr = 1252,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1111,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1597,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1270,
+ .per_2_shp_addr = 1120,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1429,
+ .mcu_2_ata_addr = 1339,
+ .app_2_per_addr = 1531,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1198,
+ .shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx35-to2.bin",
+ .script_addrs = &imx35_to2_sdma_script,
+};
+
+void __init imx35_soc_init(void)
+{
+ int to_version = mx35_revision() >> 4;
+
+ imx3_init_l2x0();
+
+ /* i.mx35 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+ mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+ mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
+ strlen(imx35_sdma_pdata.fw_name));
+ imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+}
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
deleted file mode 100644
index b7c55e7..0000000
--- a/arch/arm/mach-imx/mm-imx31.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx31_io_desc[] __initdata = {
- imx_map_entry(MX31, X_MEMC, MT_DEVICE),
- imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
- iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX31);
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-void __init mx31_init_irq(void)
-{
- mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
- .per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 423,
- .ap_2_bp_addr = 829,
- .bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
- .fw_name = "sdma-imx31-to2.bin",
- .script_addrs = &imx31_to2_sdma_script,
-};
-
-void __init imx31_soc_init(void)
-{
- int to_version = mx31_revision() >> 4;
-
- mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
- if (to_version == 1) {
- strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
- strlen(imx31_sdma_pdata.fw_name));
- imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
deleted file mode 100644
index f49bac7..0000000
--- a/arch/arm/mach-imx/mm-imx35.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx35_io_desc[] __initdata = {
- imx_map_entry(MX35, X_MEMC, MT_DEVICE),
- imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
- iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-void __init mx35_init_irq(void)
-{
- mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .uartsh_2_mcu_addr = 1183,
- .per_2_shp_addr = 1033,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1333,
- .mcu_2_ata_addr = 1252,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1111,
- .shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1597,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1270,
- .per_2_shp_addr = 1120,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1429,
- .mcu_2_ata_addr = 1339,
- .app_2_per_addr = 1531,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1198,
- .shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
- .fw_name = "sdma-imx35-to2.bin",
- .script_addrs = &imx35_to2_sdma_script,
-};
-
-void __init imx35_soc_init(void)
-{
- int to_version = mx35_revision() >> 4;
-
- /* i.mx35 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
- if (to_version == 1) {
- strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
- strlen(imx35_sdma_pdata.fw_name));
- imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
-}
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
new file mode 100644
index 0000000..c461e98
--- /dev/null
+++ b/arch/arm/mach-imx/mmdc.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#define MMDC_MAPSR 0x404
+#define BP_MMDC_MAPSR_PSD 0
+#define BP_MMDC_MAPSR_PSS 4
+
+static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ void __iomem *mmdc_base, *reg;
+ u32 val;
+ int timeout = 0x400;
+
+ mmdc_base = of_iomap(np, 0);
+ WARN_ON(!mmdc_base);
+
+ reg = mmdc_base + MMDC_MAPSR;
+
+ /* Enable automatic power saving */
+ val = readl_relaxed(reg);
+ val &= ~(1 << BP_MMDC_MAPSR_PSD);
+ writel_relaxed(val, reg);
+
+ /* Ensure it's successfully enabled */
+ while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout)) {
+ pr_warn("%s: failed to enable automatic power saving\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static struct of_device_id imx_mmdc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-mmdc", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver imx_mmdc_driver = {
+ .driver = {
+ .name = "imx-mmdc",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_mmdc_dt_ids,
+ },
+ .probe = imx_mmdc_probe,
+};
+
+static int __init imx_mmdc_init(void)
+{
+ return platform_driver_register(&imx_mmdc_driver);
+}
+postcore_initcall(imx_mmdc_init);
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
new file mode 100644
index 0000000..ab98c6f
--- /dev/null
+++ b/arch/arm/mach-imx/platsmp.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/page.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __iomem *scu_base;
+
+static struct map_desc scu_io_desc __initdata = {
+ /* .virtual and .pfn are run-time assigned */
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+void __init imx_scu_map_io(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_io_desc.virtual = IMX_IO_P2V(base);
+ scu_io_desc.pfn = __phys_to_pfn(base);
+ iotable_init(&scu_io_desc, 1);
+
+ scu_base = IMX_IO_ADDRESS(base);
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ imx_set_cpu_jump(cpu, v7_secondary_startup);
+ imx_enable_cpu(cpu, true);
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ int i, ncores;
+
+ ncores = scu_get_core_count(scu_base);
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void imx_smp_prepare(void)
+{
+ scu_enable(scu_base);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ imx_smp_prepare();
+}
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index acf1769..e455d2f 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -11,7 +11,7 @@
#include <linux/suspend.h>
#include <linux/io.h>
#include <mach/system.h>
-#include <mach/mx27.h>
+#include <mach/hardware.h>
static int mx27_suspend_enter(suspend_state_t state)
{
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
new file mode 100644
index 0000000..f20f191
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+extern unsigned long phys_l2x0_saved_regs;
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ imx6q_set_lpm(STOP_POWER_OFF);
+ imx_gpc_pre_suspend();
+ imx_set_cpu_jump(0, v7_cpu_resume);
+ /* Zzz ... */
+ cpu_suspend(0, imx6q_suspend_finish);
+ imx_smp_prepare();
+ imx_gpc_post_resume();
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+ .enter = imx6q_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_init(void)
+{
+ /*
+ * The l2x0 core code provides an infrastucture to save and restore
+ * l2x0 registers across suspend/resume cycle. But because imx6q
+ * retains L2 content during suspend and needs to resume L2 before
+ * MMU is enabled, it can only utilize register saving support and
+ * have to take care of restoring on its own. So we save physical
+ * address of the data structure used by l2x0 core to save registers,
+ * and later restore the necessary ones in imx6q resume entry.
+ */
+ phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
+
+ suspend_set_ops(&imx6q_pm_ops);
+}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
new file mode 100644
index 0000000..36cacbd
--- /dev/null
+++ b/arch/arm/mach-imx/src.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/unified.h>
+
+#define SRC_SCR 0x000
+#define SRC_GPR1 0x020
+#define BP_SRC_SCR_CORE1_RST 14
+#define BP_SRC_SCR_CORE1_ENABLE 22
+
+static void __iomem *src_base;
+
+void imx_enable_cpu(int cpu, bool enable)
+{
+ u32 mask, val;
+
+ mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+ val = readl_relaxed(src_base + SRC_SCR);
+ val = enable ? val | mask : val & ~mask;
+ writel_relaxed(val, src_base + SRC_SCR);
+}
+
+void imx_set_cpu_jump(int cpu, void *jump_addr)
+{
+ writel_relaxed(BSYM(virt_to_phys(jump_addr)),
+ src_base + SRC_GPR1 + cpu * 8);
+}
+
+void __init imx_src_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+ src_base = of_iomap(np, 0);
+ WARN_ON(!src_base);
+}
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index a1f598f..411b116 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x16000000 @ physical base address
mov \rv, #0xf0000000 @ virtual base
add \rv, \rv, #0x16000000 >> 4
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index f211990..a1769f3 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -465,7 +465,7 @@
MACHINE_START(INTEGRATOR, "ARM-Integrator")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = ap_map_io,
.init_early = integrator_init_early,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4eb03ab..5de49c3 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -492,7 +492,7 @@
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = intcp_map_io,
.init_early = intcp_init_early,
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index e664466..d869a6f 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00002300
orr \rp, \rp, #0x00000040
orr \rv, \rp, #0xfe000000 @ virtual
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 23dfaff..4cf2cc4 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,7 +91,7 @@
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index df3492a..cd9e274 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,7 +93,7 @@
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 6cbffbf..4325055 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,7 +203,7 @@
}
MACHINE_START(EM7210, "Lanner EM7210")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = em7210_map_io,
.init_irq = iop32x_init_irq,
.timer = &em7210_timer,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ceef5d4..0edc880 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,7 +207,7 @@
MACHINE_START(GLANTANK, "GLAN Tank")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = glantank_map_io,
.init_irq = iop32x_init_irq,
.timer = &glantank_timer,
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index ff9e76c..363bdf9 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xfe000000 @ physical as well as virtual
orr \rp, \rp, #0x00800000 @ location of the UART
mov \rv, \rp
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
deleted file mode 100644
index 169cc23..0000000
--- a/arch/arm/mach-iop32x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 3a62514..9e7aacc 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,7 +313,7 @@
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
@@ -327,7 +327,7 @@
*/
MACHINE_START(EP80219, "Intel EP80219")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 35b7e69..53ea86f 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,7 +186,7 @@
MACHINE_START(IQ80321, "Intel IQ80321")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq80321_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1a374ea..d726927 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,7 +327,7 @@
MACHINE_START(N2100, "Thecus N2100")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = n2100_map_io,
.init_irq = iop32x_init_irq,
.timer = &n2100_timer,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index 40c500d..361be1f 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00ff0000
orr \rp, \rp, #0x0000f700
orr \rv, #0xfe000000 @ virtual
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
deleted file mode 100644
index 8e1daf7..0000000
--- a/arch/arm/mach-iop33x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 637c027..9e14ccc 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80331, "Intel IQ80331")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80331_timer,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 90a0436..09c899a 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80332, "Intel IQ80332")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80332_timer,
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 4068166..59a5126 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -13,7 +13,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
@@ -39,7 +39,7 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
static unsigned long ixp2000_slowport_irq_flags;
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 62c60ad..af99945 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -254,7 +254,7 @@
MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = enp2611_map_io,
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 0ef533b..bdd3ccd 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00030000
#ifdef __ARMEB__
orr \rp, \rp, #0x00000003
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
new file mode 100644
index 0000000..af836c7
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/gpio.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software, you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * IXP2000 GPIO in/out, edge/level detection for IRQs:
+ * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
+ * or both Falling-edge and Rising-edge.
+ * This must be called *before* the corresponding IRQ is registerd.
+ * Use this instead of directly setting the GPIO registers.
+ * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+#define IXP2000_GPIO_LOW 0
+#define IXP2000_GPIO_HIGH 1
+
+extern void gpio_line_config(int line, int direction);
+
+static inline int gpio_line_get(int line)
+{
+ return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+ if (value == IXP2000_GPIO_HIGH) {
+ ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+ } else if (value == IXP2000_GPIO_LOW) {
+ ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+ }
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio.h
deleted file mode 100644
index 4a88d2c..0000000
--- a/arch/arm/mach-ixp2000/include/mach/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN 0
-#define GPIO_OUT 1
-
-#define IXP2000_GPIO_LOW 0
-#define IXP2000_GPIO_HIGH 1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
- return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
- if (value == IXP2000_GPIO_HIGH) {
- ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
- } else if (value == IXP2000_GPIO_LOW) {
- ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
- }
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5bad1a8..f7dfd97 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -171,7 +171,7 @@
MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 3d3cef8..d33bcac 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -286,7 +286,7 @@
MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 235638f..634b6c8 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -14,6 +14,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
@@ -40,8 +41,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
-#include <mach/gpio.h>
-
+#include <mach/gpio-ixp2000.h>
/*************************************************************************
* IXDP2x00 IRQ Initialization
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index be2a254..61a2867 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -417,7 +417,7 @@
#ifdef CONFIG_ARCH_IXDP2401
MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -428,7 +428,7 @@
#ifdef CONFIG_ARCH_IXDP2801
MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -441,7 +441,7 @@
*/
MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index e25e5fe..30dd316 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -88,6 +88,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = espresso_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index f7c6eef7..5ff524c 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/ixp23xx.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
#ifdef __ARMEB__
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index ec028e3..b3a57e0 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -331,6 +331,6 @@
.map_io = ixdp2351_map_io,
.init_irq = ixdp2351_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ixdp2351_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 844551d..8f4dcbb 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -175,6 +175,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = roadrunner_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 6f991c5..fd5e7b6 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,6 +179,25 @@
"High Speed" UART is n/c (as far as I can tell)
20 Pin ARM/Xscale JTAG interface on J2
+config MACH_DEVIXP
+ bool "Omicron DEVIXP"
+ help
+ Say 'Y' here if you want your kernel to support the DEVIXP
+ board from OMICRON electronics GmbH.
+
+config MACH_MICCPT
+ bool "Omicron MICCPT"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support the MICCPT
+ board from OMICRON electronics GmbH.
+
+config MACH_MIC256
+ bool "Omicron MIC256"
+ help
+ Say 'Y' here if you want your kernel to support the MIC256
+ board from OMICRON electronics GmbH.
+
comment "IXP4xx Options"
config IXP4XX_INDIRECT_PCI
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index d807fc3..eded94c 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -10,6 +10,7 @@
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
+obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
@@ -25,6 +26,9 @@
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
+obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o
+obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o
+obj-$(CONFIG_MACH_MIC256) += omixp-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index ee19c1d..37609a2 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -185,7 +185,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index e24564b..81dfec3 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -130,7 +130,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 03e5451..8837fbc 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -16,7 +16,7 @@
* Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define DSMG600_SDA_PIN 5
#define DSMG600_SCL_PIN 4
@@ -279,7 +278,7 @@
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &dsmg600_timer,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 23a8b36..2887c35 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -14,7 +14,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
@@ -27,7 +27,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define FSG_SDA_PIN 12
#define FSG_SCL_PIN 13
@@ -273,7 +272,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = fsg_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d4f851b..d69d1b0 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gateway7001_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 7548d9a..bf6678d 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -499,7 +499,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gmlr_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 3790dff..aa029fc 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gtwx5715_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index b974a49..8c9f8d5 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
#ifdef __ARMEB__
mov \rp, #3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index a5f87de..83d6b4e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -28,6 +28,8 @@
#include <linux/kernel.h>
#include <mach/hardware.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_request(unsigned gpio, const char *label)
{
return 0;
@@ -70,6 +72,7 @@
#include <asm-generic/gpio.h> /* cansleep wrappers */
extern int gpio_to_irq(int gpio);
+#define gpio_to_irq gpio_to_irq
extern int irq_to_gpio(unsigned int irq);
#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
deleted file mode 100644
index 4caf176..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 219d7c1..eb945a9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -41,7 +41,8 @@
* Some boards are using UART2 as console
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2())
+ machine_is_gateway7001() || machine_is_wg302v2() ||
+ machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6a29279..f235f829 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -256,7 +256,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -270,7 +270,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -284,7 +284,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -298,7 +298,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
new file mode 100644
index 0000000..ca0bae7
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/miccpt-pci.c
+ *
+ * MICCPT board-level PCI initialization
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2006 OMICRON electronics GmbH
+ *
+ * Author: Michael Jochum <michael.jochum@omicron.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#define MAX_DEV 4
+#define IRQ_LINES 4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+
+void __init miccpt_pci_preinit(void)
+{
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[IRQ_LINES] = {
+ IXP4XX_GPIO_IRQ(INTA),
+ IXP4XX_GPIO_IRQ(INTB),
+ IXP4XX_GPIO_IRQ(INTC),
+ IXP4XX_GPIO_IRQ(INTD)
+ };
+
+ if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+ return pci_irq_table[(slot + pin - 2) % 4];
+
+ return -1;
+}
+
+struct hw_pci miccpt_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = miccpt_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = miccpt_map_irq,
+};
+
+int __init miccpt_pci_init(void)
+{
+ if (machine_is_miccpt())
+ pci_common_init(&miccpt_pci);
+ return 0;
+}
+
+subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index afb5187..de716fa 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -17,7 +17,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
@@ -32,7 +32,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define NAS100D_SDA_PIN 5
#define NAS100D_SCL_PIN 6
@@ -314,7 +313,7 @@
MACHINE_START(NAS100D, "Iomega NAS 100d")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 69e40f2..ac81ccb 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -16,7 +16,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
@@ -30,7 +30,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define NSLU2_SDA_PIN 7
#define NSLU2_SCL_PIN 6
@@ -300,7 +299,7 @@
MACHINE_START(NSLU2, "Linksys NSLU2")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &nslu2_timer,
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
new file mode 100644
index 0000000..3b6a81a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-ixp4xx/omixp-setup.c
+ *
+ * omicron ixp4xx board setup
+ * Copyright (C) 2009 OMICRON electronics GmbH
+ *
+ * based nslu2-setup.c, ixdp425-setup.c:
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#ifdef CONFIG_LEDS_CLASS
+#include <linux/leds.h>
+#endif
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct resource omixp_flash_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition omixp_partitions[] = {
+ {
+ .name = "Recovery Bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ }, {
+ .name = "Calibration Data",
+ .size = 0x00020000,
+ .offset = 0x00020000,
+ }, {
+ .name = "Recovery FPGA",
+ .size = 0x00020000,
+ .offset = 0x00040000,
+ }, {
+ .name = "Release Bootloader",
+ .size = 0x00020000,
+ .offset = 0x00060000,
+ }, {
+ .name = "Release FPGA",
+ .size = 0x00020000,
+ .offset = 0x00080000,
+ }, {
+ .name = "Kernel",
+ .size = 0x00160000,
+ .offset = 0x000a0000,
+ }, {
+ .name = "Filesystem",
+ .size = 0x00C00000,
+ .offset = 0x00200000,
+ }, {
+ .name = "Persistent Storage",
+ .size = 0x00200000,
+ .offset = 0x00E00000,
+ },
+};
+
+static struct flash_platform_data omixp_flash_data[] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = omixp_partitions,
+ .nr_parts = ARRAY_SIZE(omixp_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+};
+
+static struct platform_device omixp_flash_device[] = {
+ {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &omixp_flash_data[0],
+ },
+ .resource = &omixp_flash_resources[0],
+ .num_resources = 1,
+ }, {
+ .name = "IXP4XX-Flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &omixp_flash_data[1],
+ },
+ .resource = &omixp_flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+/* Swap UART's - These boards have the console on UART2. The following
+ * configuration is used:
+ * ttyS0 .. UART2
+ * ttyS1 .. UART1
+ * This way standard images can be used with the kernel that expect
+ * the console on ttyS0.
+ */
+static struct resource omixp_uart_resources[] = {
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct plat_serial8250_port omixp_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ /* list termination */
+ }
+};
+
+static struct platform_device omixp_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = omixp_uart_data,
+ .num_resources = 2,
+ .resource = omixp_uart_resources,
+};
+
+static struct gpio_led mic256_led_pins[] = {
+ {
+ .name = "LED-A",
+ .gpio = 7,
+ },
+};
+
+static struct gpio_led_platform_data mic256_led_data = {
+ .num_leds = ARRAY_SIZE(mic256_led_pins),
+ .leds = mic256_led_pins,
+};
+
+static struct platform_device mic256_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &mic256_led_data,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 20,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 21,
+ },
+};
+
+static struct platform_device ixdp425_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = ixdp425_plat_eth,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = ixdp425_plat_eth + 1,
+ },
+};
+
+
+static struct platform_device *devixp_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *mic256_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &mic256_leds,
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *miccpt_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &omixp_flash_device[1],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static void __init omixp_init(void)
+{
+ ixp4xx_sys_init();
+
+ /* 16MiB Boot Flash */
+ omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
+ omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0);
+
+ /* 32 MiB Data Flash */
+ omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+ omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+ if (machine_is_devixp())
+ platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
+ else if (machine_is_miccpt())
+ platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
+ else if (machine_is_mic256())
+ platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
+}
+
+#ifdef CONFIG_MACH_DEVIXP
+MACHINE_START(DEVIXP, "Omicron DEVIXP")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICCPT
+MACHINE_START(MICCPT, "Omicron MICCPT")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MIC256
+MACHINE_START(MIC256, "Omicron MIC256")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 045336c..27e469e 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = vulcan_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 40b9fad..b14144b9 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = wg302v2_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5..f457e07 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@
}
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e0..ff4c21c 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@
MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8..e4d199b 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@
}
MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40..6c40f78 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
/* Maintainer: Siddarth Gore <gores@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index db06ae43..f785d40 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =KIRKWOOD_REGS_PHYS_BASE
ldr \rv, =KIRKWOOD_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
deleted file mode 100644
index 4600b44..0000000
--- a/arch/arm/mach-kirkwood/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 05d193a..c4c68e5 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -7,14 +7,13 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
-#include <asm/gpio.h>
#include "common.h"
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index b0a7d97..cc431fa 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -7,12 +7,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <plat/mpp.h>
#include "common.h"
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22..9a1e917 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab57..8849bcc 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -269,7 +269,7 @@
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -280,7 +280,7 @@
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627d..1ba12c4 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -410,7 +410,7 @@
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beef..5660ca6 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@
#ifdef CONFIG_MACH_OPENRD_BASE
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -226,7 +226,7 @@
#ifdef CONFIG_MACH_OPENRD_CLIENT
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -238,7 +238,7 @@
#ifdef CONFIG_MACH_OPENRD_ULTIMATE
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601..6663869 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@
MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6192_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494..66b3c05 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@
MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf..8b102d6 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@
#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -149,7 +149,7 @@
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b..ea104fb 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@
MACHINE_START(T5325, "HP t5325 Thin Client")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = hp_t5325_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2..262c034 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts219_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d0099..b68f5b4 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 7e3e816..853efd9 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -3,7 +3,7 @@
# Makefile for KS8695 architecture support
#
-obj-y := cpu.o irq.o time.o gpio.o devices.o
+obj-y := cpu.o irq.o time.o devices.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 3ca4f8e..a91f99d 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -34,7 +34,7 @@
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
@@ -223,7 +223,7 @@
MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = acs5k_init,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index 1338cb3..d24bcef 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -29,7 +29,7 @@
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
@@ -121,7 +121,7 @@
MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = dsm320_init,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index e2e3cba..16c9565 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -5,7 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -18,7 +18,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include <mach/devices.h>
#include "generic.h"
@@ -53,7 +53,7 @@
MACHINE_START(KS8695, "KS8695 Centaur Development Board")
/* Maintainer: Micrel Semiconductor Inc. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = micrel_init,
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index b89fb6d..73bd638 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -20,6 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
deleted file mode 100644
index 31e4565..0000000
--- a/arch/arm/mach-ks8695/gpio.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * arch/arm/mach-ks8695/gpio.c
- *
- * Copyright (C) 2006 Andrew Victor
- * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
- * Daniel Silverstone <dsilvers@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio.h>
-
-/*
- * Configure a GPIO line for either GPIO function, or its internal
- * function (Interrupt, Timer, etc).
- */
-static void ks8695_gpio_mode(unsigned int pin, short gpio)
-{
- unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
- unsigned long x, flags;
-
- if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */
- return;
-
- local_irq_save(flags);
-
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
- if (gpio) /* GPIO: set bit to 0 */
- x &= ~enable[pin];
- else /* Internal function: set bit to 1 */
- x |= enable[pin];
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
-
- local_irq_restore(flags);
-}
-
-
-static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
-{
- unsigned long x, flags;
-
- if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
- return -EINVAL;
-
- local_irq_save(flags);
-
- /* set pin as input */
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
- x &= ~IOPM(pin);
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
-
- local_irq_restore(flags);
-
- /* Set IRQ triggering type */
- irq_set_irq_type(gpio_irq[pin], type);
-
- /* enable interrupt mode */
- ks8695_gpio_mode(pin, 0);
-
- return 0;
-}
-EXPORT_SYMBOL(ks8695_gpio_interrupt);
-
-
-
-/* .... Generic GPIO interface .............................................. */
-
-/*
- * Configure the GPIO line as an input.
- */
-static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
-{
- unsigned long x, flags;
-
- if (pin > KS8695_GPIO_15)
- return -EINVAL;
-
- /* set pin to GPIO mode */
- ks8695_gpio_mode(pin, 1);
-
- local_irq_save(flags);
-
- /* set pin as input */
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
- x &= ~IOPM(pin);
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-static int ks8695_gpio_direction_output(struct gpio_chip *gc,
- unsigned int pin, int state)
-{
- unsigned long x, flags;
-
- if (pin > KS8695_GPIO_15)
- return -EINVAL;
-
- /* set pin to GPIO mode */
- ks8695_gpio_mode(pin, 1);
-
- local_irq_save(flags);
-
- /* set line state */
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- if (state)
- x |= IOPD(pin);
- else
- x &= ~IOPD(pin);
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
-
- /* set pin as output */
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
- x |= IOPM(pin);
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-
-/*
- * Set the state of an output GPIO line.
- */
-static void ks8695_gpio_set_value(struct gpio_chip *gc,
- unsigned int pin, int state)
-{
- unsigned long x, flags;
-
- if (pin > KS8695_GPIO_15)
- return;
-
- local_irq_save(flags);
-
- /* set output line state */
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- if (state)
- x |= IOPD(pin);
- else
- x &= ~IOPD(pin);
- __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
-
- local_irq_restore(flags);
-}
-
-
-/*
- * Read the state of a GPIO line.
- */
-static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
-{
- unsigned long x;
-
- if (pin > KS8695_GPIO_15)
- return -EINVAL;
-
- x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- return (x & IOPD(pin)) != 0;
-}
-
-
-/*
- * Map GPIO line to IRQ number.
- */
-static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
-{
- if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
- return -EINVAL;
-
- return gpio_irq[pin];
-}
-
-/*
- * Map IRQ number to GPIO line.
- */
-int irq_to_gpio(unsigned int irq)
-{
- if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3))
- return -EINVAL;
-
- return (irq - KS8695_IRQ_EXTERN0);
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
-/* GPIOLIB interface */
-
-static struct gpio_chip ks8695_gpio_chip = {
- .label = "KS8695",
- .direction_input = ks8695_gpio_direction_input,
- .direction_output = ks8695_gpio_direction_output,
- .get = ks8695_gpio_get_value,
- .set = ks8695_gpio_set_value,
- .to_irq = ks8695_gpio_to_irq,
- .base = 0,
- .ngpio = 16,
- .can_sleep = 0,
-};
-
-/* Register the GPIOs */
-void ks8695_register_gpios(void)
-{
- if (gpiochip_add(&ks8695_gpio_chip))
- printk(KERN_ERR "Unable to register core GPIOs\n");
-}
-
-/* .... Debug interface ..................................................... */
-
-#ifdef CONFIG_DEBUG_FS
-
-static int ks8695_gpio_show(struct seq_file *s, void *unused)
-{
- unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
- unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
- unsigned long mode, ctrl, data;
- int i;
-
- mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
- ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
- data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-
- seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
-
- for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
- seq_printf(s, "%i:\t", i);
-
- seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
-
- if (i <= KS8695_GPIO_3) {
- if (ctrl & enable[i]) {
- seq_printf(s, "EXT%i ", i);
-
- switch ((ctrl & intmask[i]) >> (4 * i)) {
- case IOPC_TM_LOW:
- seq_printf(s, "(Low)"); break;
- case IOPC_TM_HIGH:
- seq_printf(s, "(High)"); break;
- case IOPC_TM_RISING:
- seq_printf(s, "(Rising)"); break;
- case IOPC_TM_FALLING:
- seq_printf(s, "(Falling)"); break;
- case IOPC_TM_EDGE:
- seq_printf(s, "(Edges)"); break;
- }
- }
- else
- seq_printf(s, "GPIO\t");
- }
- else if (i <= KS8695_GPIO_5) {
- if (ctrl & enable[i])
- seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
- else
- seq_printf(s, "GPIO\t");
- }
- else
- seq_printf(s, "GPIO\t");
-
- seq_printf(s, "\t");
-
- seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
- }
- return 0;
-}
-
-static int ks8695_gpio_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ks8695_gpio_show, NULL);
-}
-
-static const struct file_operations ks8695_gpio_operations = {
- .open = ks8695_gpio_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init ks8695_gpio_debugfs_init(void)
-{
- /* /sys/kernel/debug/ks8695_gpio */
- (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
- return 0;
-}
-postcore_initcall(ks8695_gpio_debugfs_init);
-
-#endif
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index bf516ad..a79e489 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/regs-uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =KS8695_UART_PA @ physical base address
ldr \rv, =KS8695_UART_VA @ virtual base address
.endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
new file mode 100644
index 0000000..6eb034d
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_KS8659_GPIO_H
+#define __MACH_KS8659_GPIO_H
+
+#include <linux/kernel.h>
+
+#define KS8695_GPIO_0 0
+#define KS8695_GPIO_1 1
+#define KS8695_GPIO_2 2
+#define KS8695_GPIO_3 3
+#define KS8695_GPIO_4 4
+#define KS8695_GPIO_5 5
+#define KS8695_GPIO_6 6
+#define KS8695_GPIO_7 7
+#define KS8695_GPIO_8 8
+#define KS8695_GPIO_9 9
+#define KS8695_GPIO_10 10
+#define KS8695_GPIO_11 11
+#define KS8695_GPIO_12 12
+#define KS8695_GPIO_13 13
+#define KS8695_GPIO_14 14
+#define KS8695_GPIO_15 15
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/* Register the GPIOs */
+extern void ks8695_register_gpios(void);
+
+#endif /* __MACH_KS8659_GPIO_H */
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
index 86312d47..f5fda36 100644
--- a/arch/arm/mach-ks8695/include/mach/gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -11,47 +11,9 @@
#ifndef __ASM_ARCH_GPIO_H_
#define __ASM_ARCH_GPIO_H_
-#include <linux/kernel.h>
-
-#define KS8695_GPIO_0 0
-#define KS8695_GPIO_1 1
-#define KS8695_GPIO_2 2
-#define KS8695_GPIO_3 3
-#define KS8695_GPIO_4 4
-#define KS8695_GPIO_5 5
-#define KS8695_GPIO_6 6
-#define KS8695_GPIO_7 7
-#define KS8695_GPIO_8 8
-#define KS8695_GPIO_9 9
-#define KS8695_GPIO_10 10
-#define KS8695_GPIO_11 11
-#define KS8695_GPIO_12 12
-#define KS8695_GPIO_13 13
-#define KS8695_GPIO_14 14
-#define KS8695_GPIO_15 15
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
/*
* Map IRQ number to GPIO line.
*/
extern int irq_to_gpio(unsigned int irq);
-#include <asm-generic/gpio.h>
-
-/* If it turns out that we need to optimise GPIO access for the
- * Micrel's GPIOs, then these can be changed to check their argument
- * directly as static inlines. However for now it's probably not
- * worthwhile.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_to_irq __gpio_to_irq
-
-/* Register the GPIOs */
-extern void ks8695_register_gpios(void);
-
#endif
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index 184ef74..d6f6502 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -7,14 +7,14 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/leds.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b0a2db7..0b4e760 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00044000 @ UART1
@ mov \rp, #0x00045000 @ UART2
add \rv, \rp, #io_virt @ virtual address
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index a5fc5d0..f5db805 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -3,6 +3,6 @@
#
obj-y := timer.o irq.o common.o serial.o clock.o
-obj-y += gpiolib.o pm.o suspend.o
+obj-y += pm.o suspend.o
obj-y += phy3250.o
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c
deleted file mode 100644
index 69061ea..0000000
--- a/arch/arm/mach-lpc32xx/gpiolib.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/gpiolib.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
-#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
-#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008)
-#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C)
-#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010)
-#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014)
-#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018)
-#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C)
-#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020)
-#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024)
-#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
-#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
-#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
-#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040)
-#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044)
-#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048)
-#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C)
-#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050)
-#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054)
-#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058)
-#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060)
-#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064)
-#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068)
-#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C)
-#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070)
-#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074)
-#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078)
-
-#define GPIO012_PIN_TO_BIT(x) (1 << (x))
-#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25))
-#define GPO3_PIN_TO_BIT(x) (1 << (x))
-#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
-#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x))
-#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y))
-#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1)
-#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
-
-struct gpio_regs {
- void __iomem *inp_state;
- void __iomem *outp_set;
- void __iomem *outp_clr;
- void __iomem *dir_set;
- void __iomem *dir_clr;
-};
-
-/*
- * GPIO names
- */
-static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
- "p0.0", "p0.1", "p0.2", "p0.3",
- "p0.4", "p0.5", "p0.6", "p0.7"
-};
-
-static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
- "p1.0", "p1.1", "p1.2", "p1.3",
- "p1.4", "p1.5", "p1.6", "p1.7",
- "p1.8", "p1.9", "p1.10", "p1.11",
- "p1.12", "p1.13", "p1.14", "p1.15",
- "p1.16", "p1.17", "p1.18", "p1.19",
- "p1.20", "p1.21", "p1.22", "p1.23",
-};
-
-static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
- "p2.0", "p2.1", "p2.2", "p2.3",
- "p2.4", "p2.5", "p2.6", "p2.7",
- "p2.8", "p2.9", "p2.10", "p2.11",
- "p2.12"
-};
-
-static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
- "gpi000", "gpio01", "gpio02", "gpio03",
- "gpio04", "gpio05"
-};
-
-static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
- "gpi00", "gpi01", "gpi02", "gpi03",
- "gpi04", "gpi05", "gpi06", "gpi07",
- "gpi08", "gpi09", NULL, NULL,
- NULL, NULL, NULL, "gpi15",
- "gpi16", "gpi17", "gpi18", "gpi19",
- "gpi20", "gpi21", "gpi22", "gpi23",
- "gpi24", "gpi25", "gpi26", "gpi27"
-};
-
-static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
- "gpo00", "gpo01", "gpo02", "gpo03",
- "gpo04", "gpo05", "gpo06", "gpo07",
- "gpo08", "gpo09", "gpo10", "gpo11",
- "gpo12", "gpo13", "gpo14", "gpo15",
- "gpo16", "gpo17", "gpo18", "gpo19",
- "gpo20", "gpo21", "gpo22", "gpo23"
-};
-
-static struct gpio_regs gpio_grp_regs_p0 = {
- .inp_state = LPC32XX_GPIO_P0_INP_STATE,
- .outp_set = LPC32XX_GPIO_P0_OUTP_SET,
- .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR,
- .dir_set = LPC32XX_GPIO_P0_DIR_SET,
- .dir_clr = LPC32XX_GPIO_P0_DIR_CLR,
-};
-
-static struct gpio_regs gpio_grp_regs_p1 = {
- .inp_state = LPC32XX_GPIO_P1_INP_STATE,
- .outp_set = LPC32XX_GPIO_P1_OUTP_SET,
- .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR,
- .dir_set = LPC32XX_GPIO_P1_DIR_SET,
- .dir_clr = LPC32XX_GPIO_P1_DIR_CLR,
-};
-
-static struct gpio_regs gpio_grp_regs_p2 = {
- .inp_state = LPC32XX_GPIO_P2_INP_STATE,
- .outp_set = LPC32XX_GPIO_P2_OUTP_SET,
- .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR,
- .dir_set = LPC32XX_GPIO_P2_DIR_SET,
- .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
-};
-
-static struct gpio_regs gpio_grp_regs_p3 = {
- .inp_state = LPC32XX_GPIO_P3_INP_STATE,
- .outp_set = LPC32XX_GPIO_P3_OUTP_SET,
- .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR,
- .dir_set = LPC32XX_GPIO_P2_DIR_SET,
- .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
-};
-
-struct lpc32xx_gpio_chip {
- struct gpio_chip chip;
- struct gpio_regs *gpio_grp;
-};
-
-static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
- struct gpio_chip *gpc)
-{
- return container_of(gpc, struct lpc32xx_gpio_chip, chip);
-}
-
-static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
- unsigned pin, int input)
-{
- if (input)
- __raw_writel(GPIO012_PIN_TO_BIT(pin),
- group->gpio_grp->dir_clr);
- else
- __raw_writel(GPIO012_PIN_TO_BIT(pin),
- group->gpio_grp->dir_set);
-}
-
-static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
- unsigned pin, int input)
-{
- u32 u = GPIO3_PIN_TO_BIT(pin);
-
- if (input)
- __raw_writel(u, group->gpio_grp->dir_clr);
- else
- __raw_writel(u, group->gpio_grp->dir_set);
-}
-
-static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
- unsigned pin, int high)
-{
- if (high)
- __raw_writel(GPIO012_PIN_TO_BIT(pin),
- group->gpio_grp->outp_set);
- else
- __raw_writel(GPIO012_PIN_TO_BIT(pin),
- group->gpio_grp->outp_clr);
-}
-
-static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
- unsigned pin, int high)
-{
- u32 u = GPIO3_PIN_TO_BIT(pin);
-
- if (high)
- __raw_writel(u, group->gpio_grp->outp_set);
- else
- __raw_writel(u, group->gpio_grp->outp_clr);
-}
-
-static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
- unsigned pin, int high)
-{
- if (high)
- __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
- else
- __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
-}
-
-static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
- unsigned pin)
-{
- return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
- pin);
-}
-
-static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
- unsigned pin)
-{
- int state = __raw_readl(group->gpio_grp->inp_state);
-
- /*
- * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
- * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
- */
- return GPIO3_PIN_IN_SEL(state, pin);
-}
-
-static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
- unsigned pin)
-{
- return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
-}
-
-/*
- * GENERIC_GPIO primitives.
- */
-static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
- unsigned pin)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- __set_gpio_dir_p012(group, pin, 1);
-
- return 0;
-}
-
-static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
- unsigned pin)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- __set_gpio_dir_p3(group, pin, 1);
-
- return 0;
-}
-
-static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
- unsigned pin)
-{
- return 0;
-}
-
-static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- return __get_gpio_state_p012(group, pin);
-}
-
-static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- return __get_gpio_state_p3(group, pin);
-}
-
-static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- return __get_gpi_state_p3(group, pin);
-}
-
-static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
- int value)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- __set_gpio_dir_p012(group, pin, 0);
-
- return 0;
-}
-
-static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
- int value)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- __set_gpio_dir_p3(group, pin, 0);
-
- return 0;
-}
-
-static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
- int value)
-{
- return 0;
-}
-
-static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
- int value)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- __set_gpio_level_p012(group, pin, value);
-}
-
-static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
- int value)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- __set_gpio_level_p3(group, pin, value);
-}
-
-static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
- int value)
-{
- struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
-
- __set_gpo_level_p3(group, pin, value);
-}
-
-static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
-{
- if (pin < chip->ngpio)
- return 0;
-
- return -EINVAL;
-}
-
-static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
- {
- .chip = {
- .label = "gpio_p0",
- .direction_input = lpc32xx_gpio_dir_input_p012,
- .get = lpc32xx_gpio_get_value_p012,
- .direction_output = lpc32xx_gpio_dir_output_p012,
- .set = lpc32xx_gpio_set_value_p012,
- .request = lpc32xx_gpio_request,
- .base = LPC32XX_GPIO_P0_GRP,
- .ngpio = LPC32XX_GPIO_P0_MAX,
- .names = gpio_p0_names,
- .can_sleep = 0,
- },
- .gpio_grp = &gpio_grp_regs_p0,
- },
- {
- .chip = {
- .label = "gpio_p1",
- .direction_input = lpc32xx_gpio_dir_input_p012,
- .get = lpc32xx_gpio_get_value_p012,
- .direction_output = lpc32xx_gpio_dir_output_p012,
- .set = lpc32xx_gpio_set_value_p012,
- .request = lpc32xx_gpio_request,
- .base = LPC32XX_GPIO_P1_GRP,
- .ngpio = LPC32XX_GPIO_P1_MAX,
- .names = gpio_p1_names,
- .can_sleep = 0,
- },
- .gpio_grp = &gpio_grp_regs_p1,
- },
- {
- .chip = {
- .label = "gpio_p2",
- .direction_input = lpc32xx_gpio_dir_input_p012,
- .get = lpc32xx_gpio_get_value_p012,
- .direction_output = lpc32xx_gpio_dir_output_p012,
- .set = lpc32xx_gpio_set_value_p012,
- .request = lpc32xx_gpio_request,
- .base = LPC32XX_GPIO_P2_GRP,
- .ngpio = LPC32XX_GPIO_P2_MAX,
- .names = gpio_p2_names,
- .can_sleep = 0,
- },
- .gpio_grp = &gpio_grp_regs_p2,
- },
- {
- .chip = {
- .label = "gpio_p3",
- .direction_input = lpc32xx_gpio_dir_input_p3,
- .get = lpc32xx_gpio_get_value_p3,
- .direction_output = lpc32xx_gpio_dir_output_p3,
- .set = lpc32xx_gpio_set_value_p3,
- .request = lpc32xx_gpio_request,
- .base = LPC32XX_GPIO_P3_GRP,
- .ngpio = LPC32XX_GPIO_P3_MAX,
- .names = gpio_p3_names,
- .can_sleep = 0,
- },
- .gpio_grp = &gpio_grp_regs_p3,
- },
- {
- .chip = {
- .label = "gpi_p3",
- .direction_input = lpc32xx_gpio_dir_in_always,
- .get = lpc32xx_gpi_get_value,
- .request = lpc32xx_gpio_request,
- .base = LPC32XX_GPI_P3_GRP,
- .ngpio = LPC32XX_GPI_P3_MAX,
- .names = gpi_p3_names,
- .can_sleep = 0,
- },
- .gpio_grp = &gpio_grp_regs_p3,
- },
- {
- .chip = {
- .label = "gpo_p3",
- .direction_output = lpc32xx_gpio_dir_out_always,
- .set = lpc32xx_gpo_set_value,
- .request = lpc32xx_gpio_request,
- .base = LPC32XX_GPO_P3_GRP,
- .ngpio = LPC32XX_GPO_P3_MAX,
- .names = gpo_p3_names,
- .can_sleep = 0,
- },
- .gpio_grp = &gpio_grp_regs_p3,
- },
-};
-
-void __init lpc32xx_gpio_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
- gpiochip_add(&lpc32xx_gpiochip[i].chip);
-}
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 629e744..351bd6c 100644
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
* Debug output is hardcoded to standard UART 5
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldreq \rp, =0x40090000
ldrne \rv, =0xF4090000
.endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
new file mode 100644
index 0000000..1816e22
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
@@ -0,0 +1,50 @@
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_GPIO_LPC32XX_H
+#define __MACH_GPIO_LPC32XX_H
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+#endif /* __MACH_GPIO_LPC32XX_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 67d03da..40a8c178 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -1,74 +1 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/gpio.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/*
- * Note!
- * Muxed GP pins need to be setup to the GP state in the board level
- * code prior to using this driver.
- * GPI pins : 28xP3 group
- * GPO pins : 24xP3 group
- * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
- */
-
-#define LPC32XX_GPIO_P0_MAX 8
-#define LPC32XX_GPIO_P1_MAX 24
-#define LPC32XX_GPIO_P2_MAX 13
-#define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
-#define LPC32XX_GPO_P3_MAX 24
-
-#define LPC32XX_GPIO_P0_GRP 0
-#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
-#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
-#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
-#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
-#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
-
-/*
- * A specific GPIO can be selected with this macro
- * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
- * See the LPC32x0 User's guide for GPIO group numbers
- */
-#define LPC32XX_GPIO(x, y) ((x) + (y))
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
-#endif
+/* empty */
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
deleted file mode 100644
index a647dd6..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/memory.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset of bank 0
- */
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7993b09..6d2f0d1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
#include "common.h"
/*
@@ -382,7 +383,7 @@
MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
/* Maintainer: Kevin Wells, NXP Semiconductors */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 56ef5f6..323d4c9 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -77,7 +77,7 @@
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
-config MACH_SHEEVAD
+config MACH_GPLUGD
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
select CPU_PXA168
help
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index b0ac942..8f948f9 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -19,4 +19,4 @@
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
-obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o
+obj-$(CONFIG_MACH_GPLUGD) += gplugd.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 49c5d6d..06b5ad7 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
@@ -17,13 +17,13 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa168.h>
#include <mach/pxa168.h>
-#include <mach/gpio.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
#include <plat/pxa27x_keypad.h>
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index c79162a..e411252 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index 3143e994..149b30c 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -30,7 +30,7 @@
#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APBC_##_reg, \
+ .clk_rst = APBC_##_reg, \
.fnclksel = _fnclksel, \
.rate = _rate, \
.ops = &apbc_clk_ops, \
@@ -38,7 +38,7 @@
#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APBC_##_reg, \
+ .clk_rst = APBC_##_reg, \
.fnclksel = _fnclksel, \
.rate = _rate, \
.ops = _ops, \
@@ -46,7 +46,7 @@
#define APMU_CLK(_name, _reg, _eval, _rate) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APMU_##_reg, \
+ .clk_rst = APMU_##_reg, \
.enable_val = _eval, \
.rate = _rate, \
.ops = &apmu_clk_ops, \
@@ -54,7 +54,7 @@
#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APMU_##_reg, \
+ .clk_rst = APMU_##_reg, \
.enable_val = _eval, \
.rate = _rate, \
.ops = _ops, \
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 0ec0ca8..5720674 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -27,12 +27,12 @@
static struct map_desc standard_io_desc[] __initdata = {
{
.pfn = __phys_to_pfn(APB_PHYS_BASE),
- .virtual = APB_VIRT_BASE,
+ .virtual = (unsigned long)APB_VIRT_BASE,
.length = APB_PHYS_SIZE,
.type = MT_DEVICE,
}, {
.pfn = __phys_to_pfn(AXI_PHYS_BASE),
- .virtual = AXI_VIRT_BASE,
+ .virtual = (unsigned long)AXI_VIRT_BASE,
.length = AXI_PHYS_SIZE,
.type = MT_DEVICE,
},
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 98e25d9a..6915656 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -9,11 +9,11 @@
*/
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
@@ -188,7 +188,7 @@
pxa168_add_eth(&gplugd_eth_platform_data);
}
-MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
+MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
.map_io = mmp_map_io,
.nr_irqs = IRQ_BOARD_START,
.init_irq = pxa168_init_irq,
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
index 3254089..3e404ac 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -11,6 +11,12 @@
#ifndef __ASM_MACH_ADDR_MAP_H
#define __ASM_MACH_ADDR_MAP_H
+#ifndef __ASSEMBLER__
+#define IOMEM(x) ((void __iomem *)(x))
+#else
+#define IOMEM(x) (x)
+#endif
+
/* APB - Application Subsystem Peripheral Bus
*
* NOTE: the DMA controller registers are actually on the AXI fabric #1
@@ -18,11 +24,11 @@
* peripherals on APB, let's count it into the ABP mapping area.
*/
#define APB_PHYS_BASE 0xd4000000
-#define APB_VIRT_BASE 0xfe000000
+#define APB_VIRT_BASE IOMEM(0xfe000000)
#define APB_PHYS_SIZE 0x00200000
#define AXI_PHYS_BASE 0xd4200000
-#define AXI_VIRT_BASE 0xfe200000
+#define AXI_VIRT_BASE IOMEM(0xfe200000)
#define AXI_PHYS_SIZE 0x00200000
/* Static Memory Controller - Chip Select 0 and 1 */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 7e2ebd3..b6f14d2 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/addr-map.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =APB_PHYS_BASE @ physical
ldr \rv, =APB_VIRT_BASE @ virtual
orr \rp, \rp, #0x00017000
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
new file mode 100644
index 0000000..d14eeaf
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_GPIO_PXA_H
+#define __ASM_MACH_GPIO_PXA_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+
+#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
+
+#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio-pxa.h>
+
+#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 7bfb827..68126235 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -1,36 +1,13 @@
#ifndef __ASM_MACH_GPIO_H
#define __ASM_MACH_GPIO_H
-#include <mach/addr-map.h>
-#include <mach/irqs.h>
#include <asm-generic/gpio.h>
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
-
-#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
-
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
#include <plat/gpio.h>
#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
deleted file mode 100644
index d68b50a..0000000
--- a/arch/arm/mach-mmp/include/mach/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 5d6421d..8bfac66 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 079c188..7a7e8e4 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -25,7 +24,7 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
@@ -87,7 +86,8 @@
void mmp2_clear_pmic_int(void)
{
- unsigned long mfpr_pmic, data;
+ void __iomem *mfpr_pmic;
+ unsigned long data;
mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
data = __raw_readl(mfpr_pmic);
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b2b280c..76ca15c 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -21,7 +20,7 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 1464607..4ebbfbb 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,7 +19,7 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index c296b75..eb5be87 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -7,18 +7,18 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
-#include <mach/gpio.h>
#include "common.h"
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index f81ef1f..a60ab6d 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -93,7 +93,7 @@
}
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = halibut_fixup,
.map_io = halibut_map_io,
.init_irq = halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 1df15aa..5a4882f 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -74,7 +74,7 @@
extern struct sys_timer msm_timer;
MACHINE_START(MAHIMAHI, "mahimahi")
- .boot_params = 0x20000100,
+ .atag_offset = 0x100,
.fixup = mahimahi_fixup,
.map_io = mahimahi_map_io,
.init_irq = msm_init_irq,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index c03f269..6d84ee7 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -13,7 +13,7 @@
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <mach/vreg.h>
#include <mach/mpp.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
@@ -130,7 +129,7 @@
}
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -138,7 +137,7 @@
MACHINE_END
MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -146,7 +145,7 @@
MACHINE_END
MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -154,7 +153,7 @@
MACHINE_END
MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index d1e4cc8..71de506 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -14,7 +14,7 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -31,7 +31,6 @@
#include <asm/memory.h>
#include <asm/setup.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
@@ -122,7 +121,7 @@
}
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
@@ -132,7 +131,7 @@
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
@@ -142,7 +141,7 @@
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 9221f54..cf38e22 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -8,18 +8,16 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
@@ -53,8 +51,6 @@
static void __init msm8x60_init_irq(void)
{
- unsigned int i;
-
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
@@ -66,21 +62,47 @@
*/
if (!machine_is_msm8x60_sim())
writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
}
static void __init msm8x60_init(void)
{
}
+#ifdef CONFIG_OF
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+ {}
+};
+
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+ { .compatible = "qcom,msm-8660-qgic", },
+ {}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_matching_node_by_address(NULL, msm_dt_gic_match,
+ MSM8X60_QGIC_DIST_PHYS);
+ if (node)
+ irq_domain_add_simple(node, GIC_SPI_START);
+
+ if (of_machine_is_compatible("qcom,msm8660-surf")) {
+ printk(KERN_INFO "Init surf UART registers\n");
+ msm8x60_init_uart12dm();
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+ "qcom,msm8660-fluid",
+ "qcom,msm8660-surf",
+ NULL
+};
+#endif /* CONFIG_OF */
+
MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
@@ -116,3 +138,14 @@
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
+
+#ifdef CONFIG_OF
+/* TODO: General device tree support for all MSM. */
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_dt_init,
+ .timer = &msm_timer,
+ .dt_compat = msm8x60_fluid_match,
+MACHINE_END
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6a96911..7e8909c 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -14,7 +14,7 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -32,7 +32,6 @@
#include <mach/board.h>
#include <mach/irqs.h>
#include <mach/sirc.h>
-#include <mach/gpio.h>
#include <mach/vreg.h>
#include <mach/mmc.h>
@@ -193,7 +192,7 @@
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
@@ -201,7 +200,7 @@
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index c6e043c..32b4657 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -11,7 +11,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -22,7 +22,6 @@
#include <linux/delay.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -105,7 +104,7 @@
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
index f7a9724..8650342 100644
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ b/arch/arm/mach-msm/board-trout-mmc.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-msm/board-trout-mmc.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -11,7 +11,6 @@
#include <linux/err.h>
#include <linux/debugfs.h>
-#include <asm/gpio.h>
#include <asm/io.h>
#include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 729bb49..25105c1 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-msm/board-trout-mddi.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -11,7 +11,6 @@
#include <linux/err.h>
#include <asm/io.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <mach/msm_fb.h>
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 7acd202..6b9b227 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,7 +93,7 @@
}
MACHINE_START(TROUT, "HTC Dream")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = trout_fixup,
.map_io = trout_map_io,
.init_irq = trout_init_irq,
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index c4f5e26..993780f 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -176,12 +176,6 @@
.name = "cmd_irq",
},
{
- .start = INT_SDC1_1,
- .end = INT_SDC1_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
- {
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
@@ -204,12 +198,6 @@
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
- {
- .start = INT_SDC2_1,
- .end = INT_SDC2_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
@@ -233,12 +221,6 @@
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
- {
- .start = INT_SDC3_1,
- .end = INT_SDC3_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
@@ -262,12 +244,6 @@
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
- {
- .start = INT_SDC4_1,
- .end = INT_SDC4_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 12d8deb..131633b 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -140,12 +140,6 @@
.name = "cmd_irq",
},
{
- .start = INT_SDC1_1,
- .end = INT_SDC1_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
- {
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
@@ -168,12 +162,6 @@
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
- {
- .start = INT_SDC2_1,
- .end = INT_SDC2_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
@@ -197,12 +185,6 @@
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
- {
- .start = INT_SDC3_1,
- .end = INT_SDC3_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
@@ -226,12 +208,6 @@
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
- {
- .start = INT_SDC4_1,
- .end = INT_SDC4_1,
- .flags = IORESOURCE_IRQ,
- .name = "pio_irq",
- },
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index 5a31f70..41c252d 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -37,7 +37,7 @@
:
: "memory", "cc");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 646b99e..2dc73cc 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
#include <mach/msm_iomap.h>
#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =MSM_DEBUG_UART_PHYS
ldr \rv, =MSM_DEBUG_UART_BASE
.endm
@@ -37,7 +37,7 @@
beq 1001b
.endm
#else
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rv, #0xff000000
orr \rv, \rv, #0x00f00000
.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 1246715..717076f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Migrated the code from ARM MP port to be more consistent
- * with interrupt processing , the following still holds true
- * however, all interrupts are treated the same regardless of
- * if they are local IPI or PPI
- *
- * Interrupts 0-15 are IPI
- * 16-31 are PPI
- * (16-18 are the timers)
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the
- * highest priority enabled interrupt. We then just need to check
- * whether it is in the valid range for an IRQ (0-1020 inclusive).
- *
- * Base ARM code assumes that the local (private) peripheral interrupts
- * are not valid, we treat them differently, in that the privates are
- * handled like normal shared interrupts with the exception that only
- * one processor can register the interrupt and the handler must be
- * the same for all processors.
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
- 9-0 =int # */
-
- bic \irqnr, \irqstat, #0x1c00 @mask src
- cmp \irqnr, #15
- ldr \tmp, =1021
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #16
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 36ad50d..40a8c178 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -1,26 +1 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARCH_MSM_GPIO_H
-#define __ASM_ARCH_MSM_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __ASM_ARCH_MSM_GPIO_H */
+/* empty */
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
deleted file mode 100644
index 58d5e7e..0000000
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-msm/include/mach/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#elif defined(CONFIG_ARCH_MSM8X60)
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-#elif defined(CONFIG_ARCH_MSM8960)
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-#endif
-
-#endif
-
diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h
index 5631b51..ffcd9e3 100644
--- a/arch/arm/mach-msm/include/mach/mmc.h
+++ b/arch/arm/mach-msm/include/mach/mmc.h
@@ -8,13 +8,6 @@
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_func.h>
-struct embedded_sdio_data {
- struct sdio_cis cis;
- struct sdio_cccr cccr;
- struct sdio_embedded_func *funcs;
- int num_funcs;
-};
-
struct msm_mmc_gpio {
unsigned no;
const char *name;
@@ -29,9 +22,9 @@
unsigned int ocr_mask; /* available voltages */
u32 (*translate_vdd)(struct device *, unsigned int);
unsigned int (*status)(struct device *);
- struct embedded_sdio_data *embedded_sdio;
int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
struct msm_mmc_gpio_data *gpio_data;
+ void (*init_card)(struct mmc_card *card);
};
#endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 7276595..fdec58a 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -117,7 +117,7 @@
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
- pen_release = cpu;
+ pen_release = cpu_logical_map(cpu);
__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 63621f1..afeeca5 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -71,12 +71,16 @@
struct msm_clock {
struct clock_event_device clockevent;
struct clocksource clocksource;
- struct irqaction irq;
+ unsigned int irq;
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
void __iomem *global_counter;
void __iomem *local_counter;
+ union {
+ struct clock_event_device *evt;
+ struct clock_event_device __percpu **percpu_evt;
+ };
};
enum {
@@ -87,13 +91,10 @@
static struct msm_clock msm_clocks[];
-static struct clock_event_device *local_clock_event;
static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = dev_id;
- if (smp_processor_id() != 0)
- evt = local_clock_event;
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
if (evt->event_handler == NULL)
return IRQ_HANDLED;
evt->event_handler(evt);
@@ -171,13 +172,7 @@
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "gp_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[0].clockevent,
- .irq = INT_GP_TIMER_EXP
- },
+ .irq = INT_GP_TIMER_EXP,
.freq = GPT_HZ,
},
[MSM_CLOCK_DGT] = {
@@ -196,13 +191,7 @@
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "dg_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[1].clockevent,
- .irq = INT_DEBUG_TIMER_EXP
- },
+ .irq = INT_DEBUG_TIMER_EXP,
.freq = DGT_HZ >> MSM_DGT_SHIFT,
.shift = MSM_DGT_SHIFT,
}
@@ -261,10 +250,30 @@
printk(KERN_ERR "msm_timer_init: clocksource_register "
"failed for %s\n", cs->name);
- res = setup_irq(clock->irq.irq, &clock->irq);
+ ce->irq = clock->irq;
+ if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+ clock->percpu_evt = alloc_percpu(struct clock_event_device *);
+ if (!clock->percpu_evt) {
+ pr_err("msm_timer_init: memory allocation "
+ "failed for %s\n", ce->name);
+ continue;
+ }
+
+ *__this_cpu_ptr(clock->percpu_evt) = ce;
+ res = request_percpu_irq(ce->irq, msm_timer_interrupt,
+ ce->name, clock->percpu_evt);
+ if (!res)
+ enable_percpu_irq(ce->irq, 0);
+ } else {
+ clock->evt = ce;
+ res = request_irq(ce->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+ ce->name, &clock->evt);
+ }
+
if (res)
- printk(KERN_ERR "msm_timer_init: setup_irq "
- "failed for %s\n", cs->name);
+ pr_err("msm_timer_init: request_irq failed for %s\n",
+ ce->name);
clockevents_register_device(ce);
}
@@ -273,6 +282,7 @@
#ifdef CONFIG_SMP
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+ static bool local_timer_inited;
struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
/* Use existing clock_event for cpu 0 */
@@ -281,12 +291,13 @@
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- if (!local_clock_event) {
+ if (!local_timer_inited) {
writel(0, clock->regbase + TIMER_ENABLE);
writel(0, clock->regbase + TIMER_CLEAR);
writel(~0, clock->regbase + TIMER_MATCH_VAL);
+ local_timer_inited = true;
}
- evt->irq = clock->irq.irq;
+ evt->irq = clock->irq;
evt->name = "local_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT;
evt->rating = clock->clockevent.rating;
@@ -298,17 +309,17 @@
clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
- local_clock_event = evt;
-
- gic_enable_ppi(clock->irq.irq);
+ *__this_cpu_ptr(clock->percpu_evt) = evt;
+ enable_percpu_irq(evt->irq, 0);
clockevents_register_device(evt);
return 0;
}
-inline int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- return 1;
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
}
#endif
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 20f3f12..0e94268 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,7 +145,7 @@
MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wxl_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index df5aebe..50b85ae 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,7 +93,7 @@
MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index 04891428..a7df02b 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/mv78xx0.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =MV78XX0_REGS_PHYS_BASE
ldr \rv, =MV78XX0_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
deleted file mode 100644
index a648c51..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 3e24431..e421b70 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -7,12 +7,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/irq.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 59b7686..cf4e494 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -7,13 +7,12 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/mpp.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d927f14..e85222e 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,7 +78,7 @@
MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd78x00_masa_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index b4e7c58..af0c212 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,8 +1,9 @@
-if ARCH_MX503 || ARCH_MX51
+if ARCH_MX5
+
# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
# image. So for most time, SOC_IMX50/51/53 should be used.
-config ARCH_MX5
+config ARCH_MX51
bool
config ARCH_MX50
@@ -19,7 +20,6 @@
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
- select ARCH_MX5
select ARCH_MX50
config SOC_IMX51
@@ -30,7 +30,7 @@
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
- select ARCH_MX5
+ select ARCH_MX51
config SOC_IMX53
bool
@@ -38,10 +38,8 @@
select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
- select ARCH_MX5
select ARCH_MX53
-if ARCH_MX50_SUPPORTED
#comment "i.MX50 machines:"
config MACH_MX50_RDP
@@ -52,22 +50,29 @@
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
- select IMX_HAVE_PLATFORM_FEC
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
-endif # ARCH_MX50_SUPPORTED
-
-if ARCH_MX51
comment "i.MX51 machines:"
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -91,8 +96,10 @@
config MACH_EUKREA_CPUIMX51
bool "Support Eukrea CPUIMX51 module"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -119,10 +126,12 @@
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SPI_IMX
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
@@ -147,6 +156,8 @@
bool
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_PATA_IMX
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
@@ -167,11 +178,20 @@
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
-endif # ARCH_MX51
-
-if ARCH_MX53_SUPPORTED
comment "i.MX53 machines:"
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
@@ -221,6 +241,4 @@
Include support for MX53 ARD platform. This includes specific
configurations for the board and its peripherals.
-endif # ARCH_MX53_SUPPORTED
-
endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 383e7cd..0fc6080 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,8 +3,7 @@
#
# Object file lists.
-obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
-obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
obj-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
@@ -22,3 +21,6 @@
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 68934ea..1fc1103 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -22,21 +22,18 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <mach/eukrea-baseboards.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27)
#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28)
@@ -57,7 +54,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
- .irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -65,7 +62,7 @@
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
- .irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -73,7 +70,7 @@
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
- .irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -81,7 +78,7 @@
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -167,7 +164,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -190,7 +187,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -206,17 +203,17 @@
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -270,12 +267,12 @@
ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
- mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ imx51_add_fsl_usb2_udc(&usb_pdata);
}
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
eukrea_mbimx51_baseboard_init();
@@ -293,10 +290,11 @@
MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d5..52a11c1 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -22,7 +22,6 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/i2c-gpio.h>
#include <linux/spi/spi.h>
#include <linux/can/platform/mcp251x.h>
@@ -32,14 +31,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "cpu_op-mx51.h"
#define USBH1_RST IMX_GPIO_NR(2, 28)
@@ -108,7 +105,7 @@
/* Touchscreen */
/* IRQ */
- _MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
PAD_CTL_PKE | PAD_CTL_SRE_FAST |
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
@@ -129,7 +126,7 @@
I2C_BOARD_INFO("tsc2007", 0x49),
.type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = gpio_to_irq(TSC2007_IRQGPIO),
+ .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
};
@@ -149,7 +146,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -172,7 +169,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -189,17 +186,17 @@
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -245,7 +242,7 @@
.mode = SPI_MODE_0,
.chip_select = 0,
.platform_data = &mcp251x_info,
- .irq = gpio_to_irq(CAN_IRQGPIO)
+ .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
},
};
@@ -303,17 +300,17 @@
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
- mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ imx51_add_fsl_usb2_udc(&usb_pdata);
}
gpio_request(USBH1_RST, "usb_rst");
gpio_direction_output(USBH1_RST, 0);
msleep(20);
gpio_set_value(USBH1_RST, 1);
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
eukrea_mbimxsd51_baseboard_init();
@@ -331,10 +328,11 @@
MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51sd_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index 7de25c6..fc3621d 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -219,6 +219,7 @@
.map_io = mx50_map_io,
.init_early = imx50_init_early,
.init_irq = mx50_init_irq,
+ .handle_irq = imx50_handle_irq,
.timer = &mx50_rdp_timer,
.init_machine = mx50_rdp_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 07a3815..0578390 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -25,7 +25,6 @@
#include <mach/3ds_debugboard.h>
#include "devices-imx51.h"
-#include "devices.h"
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
@@ -169,10 +168,11 @@
MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mx51_3ds_timer,
.init_machine = mx51_3ds_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 11b0ff6..5c837603 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -24,14 +24,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "cpu_op-mx51.h"
#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
@@ -176,7 +174,7 @@
.bitrate = 100000,
};
-static struct imxi2c_platform_data babbage_hsi2c_data = {
+static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
.bitrate = 400000,
};
@@ -249,7 +247,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -272,7 +270,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -288,17 +286,17 @@
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -351,22 +349,27 @@
.wp_type = ESDHC_WP_GPIO,
};
+void __init imx51_babbage_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+ ARRAY_SIZE(mx51babbage_pads));
+}
+
/*
* Board specific initialization.
*/
static void __init mx51_babbage_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
- MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
+ PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
imx51_soc_init();
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
- mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
- ARRAY_SIZE(mx51babbage_pads));
+ imx51_babbage_common_init();
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_imx_uart(1, NULL);
@@ -381,17 +384,17 @@
imx51_add_imx_i2c(0, &babbage_i2c_data);
imx51_add_imx_i2c(1, &babbage_i2c_data);
- mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+ imx51_add_hsi2c(&babbage_hsi2c_data);
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
- mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ imx51_add_fsl_usb2_udc(&usb_pdata);
}
gpio_usbh1_active();
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
/* setback USBH1_STP to be function */
mxc_iomux_v3_setup_pad(usbh1stp);
babbage_usbhub_reset();
@@ -416,10 +419,11 @@
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mx51_babbage_timer,
.init_machine = mx51_babbage_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 551daf8..a9e4866 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -32,14 +32,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
@@ -163,6 +161,11 @@
.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
};
+static struct esdhc_platform_data sd_pdata = {
+ .cd_type = ESDHC_CD_CONTROLLER,
+ .wp_type = ESDHC_WP_CONTROLLER,
+};
+
static struct gpio_keys_button mx51_efikamx_powerkey[] = {
{
.code = KEY_POWER,
@@ -239,9 +242,11 @@
/* on < 1.2 boards both SD controllers are used */
if (system_rev < 0x12) {
- imx51_add_sdhci_esdhc_imx(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, NULL);
+ imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
mx51_efikamx_leds[2].default_trigger = "mmc1";
- }
+ } else
+ imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
gpio_led_register_device(-1, &mx51_efikamx_leds_data);
imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
@@ -280,10 +285,11 @@
MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mx51_efikamx_timer,
.init_machine = mx51_efikamx_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 8a9bca2..38c4a3e 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -35,14 +35,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20)
@@ -56,6 +54,7 @@
#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1)
#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
static iomux_v3_cfg_t mx51efikasb_pads[] = {
/* USB HOST2 */
@@ -97,6 +96,8 @@
/* BT */
MX51_PAD_EIM_A17__GPIO2_11,
+
+ MX51_PAD_SD1_CD,
};
static int initialize_usbh2_port(struct platform_device *pdev)
@@ -119,7 +120,7 @@
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data usbh2_config = {
+static struct mxc_usbh_platform_data usbh2_config __initdata = {
.init = initialize_usbh2_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -129,7 +130,7 @@
usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
if (usbh2_config.otg)
- mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+ imx51_add_mxc_ehci_hs(2, &usbh2_config);
}
static const struct gpio_led mx51_efikasb_leds[] __initconst = {
@@ -182,6 +183,18 @@
.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
};
+static struct esdhc_platform_data sd0_pdata = {
+#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27)
+ .cd_gpio = EFIKASB_SD1_CD,
+ .cd_type = ESDHC_CD_GPIO,
+ .wp_type = ESDHC_WP_CONTROLLER,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+ .cd_type = ESDHC_CD_CONTROLLER,
+ .wp_type = ESDHC_WP_CONTROLLER,
+};
+
static struct regulator *pwgt1, *pwgt2;
static void mx51_efikasb_power_off(void)
@@ -250,7 +263,8 @@
mx51_efikasb_board_id();
mx51_efikasb_usb();
- imx51_add_sdhci_esdhc_imx(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
+ imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
gpio_led_register_device(-1, &mx51_efikasb_leds_data);
imx_add_gpio_keys(&mx51_efikasb_keys_data);
@@ -266,10 +280,11 @@
};
MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.init_machine = efikasb_board_init,
.timer = &mx51_efikasb_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4..0d7f0ff 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -134,8 +134,8 @@
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(ARD_ETHERNET_INT_B),
- .end = gpio_to_irq(ARD_ETHERNET_INT_B),
+ .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+ .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
.flags = IORESOURCE_IRQ,
},
};
@@ -171,9 +171,6 @@
static void __init mx53_ard_io_init(void)
{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
-
gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
gpio_direction_input(ARD_ETHERNET_INT_B);
@@ -216,6 +213,13 @@
return 0;
}
+void __init imx53_ard_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
+ ARRAY_SIZE(mx53_ard_pads));
+ weim_cs_config();
+}
+
static struct platform_device *devices[] __initdata = {
&ard_smsc_lan9220_device,
};
@@ -225,8 +229,8 @@
imx53_soc_init();
imx53_add_imx_uart(0, NULL);
+ imx53_ard_common_init();
mx53_ard_io_init();
- weim_cs_config();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
@@ -234,6 +238,7 @@
imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
imx_add_gpio_keys(&ard_button_data);
+ imx53_add_ahci_imx();
}
static void __init mx53_ard_timer_init(void)
@@ -249,6 +254,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 1b417b0..6bea31a 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -131,12 +131,17 @@
.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
};
+void __init imx53_evk_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
+ ARRAY_SIZE(mx53_evk_pads));
+}
+
static void __init mx53_evk_board_init(void)
{
imx53_soc_init();
+ imx53_evk_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
mx53_evk_fec_reset();
imx53_add_fec(&mx53_evk_fec_pdata);
@@ -167,6 +172,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_evk_timer,
.init_machine = mx53_evk_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4e1d51d..7678f77 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -42,6 +43,7 @@
#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
+#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
static iomux_v3_cfg_t mx53_loco_pads[] = {
/* FEC */
@@ -64,6 +66,10 @@
MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+ /* I2C1 */
+ MX53_PAD_CSI0_DAT8__I2C1_SDA,
+ MX53_PAD_CSI0_DAT9__I2C1_SCL,
+ MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */
/* I2C2 */
MX53_PAD_KEY_COL3__I2C2_SCL,
MX53_PAD_KEY_ROW3__I2C2_SDA,
@@ -257,22 +263,42 @@
.num_leds = ARRAY_SIZE(mx53loco_leds),
};
+void __init imx53_qsb_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
+ ARRAY_SIZE(mx53_loco_pads));
+}
+
+static struct i2c_board_info mx53loco_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("mma8450", 0x1C),
+ },
+};
+
static void __init mx53_loco_board_init(void)
{
+ int ret;
imx53_soc_init();
+ imx53_qsb_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
imx53_add_imx_uart(0, NULL);
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
imx53_add_imx2_wdt(0, NULL);
+
+ ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
+ if (ret)
+ pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
+
+ i2c_register_board_info(0, mx53loco_i2c_devices,
+ ARRAY_SIZE(mx53loco_i2c_devices));
imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
imx_add_gpio_keys(&loco_button_data);
gpio_led_register_device(-1, &mx53loco_leds_data);
+ imx53_add_ahci_imx();
}
static void __init mx53_loco_timer_init(void)
@@ -288,6 +314,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_loco_timer,
.init_machine = mx53_loco_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894..59c0845 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -35,6 +35,7 @@
#include "devices-imx53.h"
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3)
static iomux_v3_cfg_t mx53_smd_pads[] = {
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,12 +112,30 @@
.bitrate = 100000,
};
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+ int ret;
+
+ /* Enable SATA PWR */
+ ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+ GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+ if (ret) {
+ pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+ return;
+ }
+}
+
+void __init imx53_smd_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
+ ARRAY_SIZE(mx53_smd_pads));
+}
+
static void __init mx53_smd_board_init(void)
{
imx53_soc_init();
+ imx53_smd_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
mx53_smd_init_uart();
mx53_smd_fec_reset();
imx53_add_fec(&mx53_smd_fec_data);
@@ -125,6 +144,8 @@
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(1, NULL);
imx53_add_sdhci_esdhc_imx(2, NULL);
+ mx53_smd_ahci_pwr_on();
+ imx53_add_ahci_imx();
}
static void __init mx53_smd_timer_init(void)
@@ -140,6 +161,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_smd_timer,
.init_machine = mx53_smd_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index f7bf996..2aacf41 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/of.h>
#include <asm/div64.h>
@@ -1401,6 +1402,22 @@
.secondary = &esdhc4_ipg_clk,
};
+static struct clk sata_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_max_enable,
+ .enable_reg = MXC_CCM_CCGR4,
+ .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+ .disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+ .parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+ .parent = &ahb_clk,
+};
+
DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1418,6 +1435,10 @@
DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &pll3_sw_clk, NULL);
+/* PATA */
+DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -1474,6 +1495,7 @@
_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
};
static struct clk_lookup mx53_lookups[] = {
@@ -1507,6 +1529,10 @@
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
};
static void clk_tree_init(void)
@@ -1548,9 +1574,8 @@
clk_enable(&main_bus_clk);
clk_enable(&iim_clk);
- mx51_revision();
+ imx_print_silicon_rev("i.MX51", mx51_revision());
clk_disable(&iim_clk);
- mx51_display_revision();
/* move usb_phy_clk to 24MHz */
clk_set_parent(&usb_phy1_clk, &osc_clk);
@@ -1568,7 +1593,7 @@
/* System timer */
mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_MXC_INT_GPT);
+ MX51_INT_GPT);
return 0;
}
@@ -1592,9 +1617,8 @@
clk_enable(&main_bus_clk);
clk_enable(&iim_clk);
- mx53_revision();
+ imx_print_silicon_rev("i.MX53", mx53_revision());
clk_disable(&iim_clk);
- mx53_display_revision();
/* Set SDHC parents to be PLL2 */
clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
@@ -1609,3 +1633,41 @@
MX53_INT_GPT);
return 0;
}
+
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+ unsigned long *ckih1, unsigned long *ckih2)
+{
+ struct device_node *np;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ *ckil = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ *osc = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ *ckih1 = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+ *ckih2 = rate;
+ }
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 86f87da..5c53282 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -18,7 +18,7 @@
#include <mach/hardware.h>
#include <asm/io.h>
-static int cpu_silicon_rev = -1;
+static int mx5_cpu_rev = -1;
#define IIM_SREV 0x24
#define MX50_HW_ADADIG_DIGPROG 0xB0
@@ -28,11 +28,14 @@
void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
u32 rev = readl(iim_base + IIM_SREV) & 0xff;
- if (rev == 0x0)
+ switch (rev) {
+ case 0x0:
return IMX_CHIP_REVISION_2_0;
- else if (rev == 0x10)
+ case 0x10:
return IMX_CHIP_REVISION_3_0;
- return 0;
+ default:
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
}
/*
@@ -45,33 +48,13 @@
if (!cpu_is_mx51())
return -EINVAL;
- if (cpu_silicon_rev == -1)
- cpu_silicon_rev = get_mx51_srev();
+ if (mx5_cpu_rev == -1)
+ mx5_cpu_rev = get_mx51_srev();
- return cpu_silicon_rev;
+ return mx5_cpu_rev;
}
EXPORT_SYMBOL(mx51_revision);
-void mx51_display_revision(void)
-{
- int rev;
- char *srev;
- rev = mx51_revision();
-
- switch (rev) {
- case IMX_CHIP_REVISION_2_0:
- srev = IMX_CHIP_REVISION_2_0_STRING;
- break;
- case IMX_CHIP_REVISION_3_0:
- srev = IMX_CHIP_REVISION_3_0_STRING;
- break;
- default:
- srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
- }
- printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx51_display_revision);
-
#ifdef CONFIG_NEON
/*
@@ -121,10 +104,10 @@
if (!cpu_is_mx53())
return -EINVAL;
- if (cpu_silicon_rev == -1)
- cpu_silicon_rev = get_mx53_srev();
+ if (mx5_cpu_rev == -1)
+ mx5_cpu_rev = get_mx53_srev();
- return cpu_silicon_rev;
+ return mx5_cpu_rev;
}
EXPORT_SYMBOL(mx53_revision);
@@ -134,7 +117,7 @@
u32 rev;
if (!anatop) {
- cpu_silicon_rev = -EINVAL;
+ mx5_cpu_rev = -EINVAL;
return 0;
}
@@ -159,36 +142,13 @@
if (!cpu_is_mx50())
return -EINVAL;
- if (cpu_silicon_rev == -1)
- cpu_silicon_rev = get_mx50_srev();
+ if (mx5_cpu_rev == -1)
+ mx5_cpu_rev = get_mx50_srev();
- return cpu_silicon_rev;
+ return mx5_cpu_rev;
}
EXPORT_SYMBOL(mx50_revision);
-void mx53_display_revision(void)
-{
- int rev;
- char *srev;
- rev = mx53_revision();
-
- switch (rev) {
- case IMX_CHIP_REVISION_1_0:
- srev = IMX_CHIP_REVISION_1_0_STRING;
- break;
- case IMX_CHIP_REVISION_2_0:
- srev = IMX_CHIP_REVISION_2_0_STRING;
- break;
- case IMX_CHIP_REVISION_2_1:
- srev = IMX_CHIP_REVISION_2_1_STRING;
- break;
- default:
- srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
- }
- printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx53_display_revision);
-
static int __init post_cpu_init(void)
{
unsigned int reg;
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index e11bc0e..af488bc 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -13,9 +13,15 @@
#define imx51_add_fec(pdata) \
imx_add_fec(&imx51_fec_data, pdata)
+extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
+#define imx51_add_fsl_usb2_udc(pdata) \
+ imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
+
extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
#define imx51_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+#define imx51_add_hsi2c(pdata) \
+ imx51_add_imx_i2c(2, pdata)
extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
#define imx51_add_imx_ssi(id, pdata) \
@@ -25,6 +31,13 @@
#define imx51_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
+#define imx51_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
+#define imx51_add_mxc_ehci_hs(id, pdata) \
+ imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
+
extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
#define imx51_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
@@ -52,3 +65,7 @@
extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
#define imx51_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx51_pata_imx_data;
+#define imx51_add_pata_imx() \
+ imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index c27fe8b..6e1e5d1 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -40,3 +40,9 @@
extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
#define imx53_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx53_pata_imx_data;
+#define imx53_add_pata_imx() \
+ imx_add_pata_imx(&imx53_pata_imx_data)
+
+extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
deleted file mode 100644
index 371ca8c..0000000
--- a/arch/arm/mach-mx5/devices.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
-
-static struct resource mxc_hsi2c_resources[] = {
- {
- .start = MX51_HSI2C_DMA_BASE_ADDR,
- .end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_HS_I2C,
- .end = MX51_MXC_INT_HS_I2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_hsi2c_device = {
- .name = "imx-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
- .resource = mxc_hsi2c_resources
-};
-
-static u64 usb_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource usbotg_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR,
- .end = MX51_OTG_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_USB_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* OTG gadget device */
-struct platform_device mxc_usbdr_udc_device = {
- .name = "fsl-usb2-udc",
- .id = -1,
- .num_resources = ARRAY_SIZE(usbotg_resources),
- .resource = usbotg_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device mxc_usbdr_host_device = {
- .name = "mxc-ehci",
- .id = 0,
- .num_resources = ARRAY_SIZE(usbotg_resources),
- .resource = usbotg_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource usbh1_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR + 0x200,
- .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_USB_H1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh1_device = {
- .name = "mxc-ehci",
- .id = 1,
- .num_resources = ARRAY_SIZE(usbh1_resources),
- .resource = usbh1_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource usbh2_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR + 0x400,
- .end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_USB_H2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2_device = {
- .name = "mxc-ehci",
- .id = 2,
- .num_resources = ARRAY_SIZE(usbh2_resources),
- .resource = usbh2_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
deleted file mode 100644
index 55a5129..0000000
--- a/arch/arm/mach-mx5/devices.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct platform_device mxc_usbdr_host_device;
-extern struct platform_device mxc_usbh1_device;
-extern struct platform_device mxc_usbh2_device;
-extern struct platform_device mxc_usbdr_udc_device;
-extern struct platform_device mxc_hsi2c_device;
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c
index 7ce12c8..c17fa13 100644
--- a/arch/arm/mach-mx5/ehci.c
+++ b/arch/arm/mach-mx5/ehci.c
@@ -52,7 +52,7 @@
void __iomem *usbother_base;
int ret = 0;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base) {
printk(KERN_ERR "%s(): ioremap failed\n", __func__);
return -ENOMEM;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index bbf4564..a6a3ab8 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -28,7 +28,6 @@
#include <asm/mach/arch.h>
#include "devices-imx51.h"
-#include "devices.h"
#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30)
#define MBIMX51_LED0 IMX_GPIO_NR(3, 5)
@@ -160,7 +159,7 @@
static struct i2c_board_info mbimx51_i2c_devices[] = {
{
I2C_BOARD_INFO("tsc2007", 0x49),
- .irq = gpio_to_irq(MBIMX51_TSC2007_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
.platform_data = &tsc2007_data,
}, {
I2C_BOARD_INFO("tlv320aic23", 0x1a),
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index 2619239..d817fc8 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -24,7 +24,6 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/input.h>
@@ -41,13 +40,12 @@
#include <mach/audmux.h>
#include "devices-imx51.h"
-#include "devices.h"
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LED */
MX51_PAD_NANDF_D10__GPIO3_30,
/* SWITCH */
- _MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
PAD_CTL_PKE | PAD_CTL_SRE_FAST |
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
/* UART2 */
@@ -66,7 +64,7 @@
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
/* SD1 CD */
- _MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
PAD_CTL_PKE | PAD_CTL_SRE_FAST |
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
new file mode 100644
index 0000000..ccc6158
--- /dev/null
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx51.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 4; /* imx51 gets 4 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx51_irq_match[] __initconst = {
+ { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx51_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx51_irq_match);
+
+ node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx51_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx51_auxdata_lookup, NULL);
+}
+
+static void __init imx51_timer_init(void)
+{
+ mx51_clocks_init_dt();
+}
+
+static struct sys_timer imx51_timer = {
+ .init = imx51_timer_init,
+};
+
+static const char *imx51_dt_board_compat[] __initdata = {
+ "fsl,imx51-babbage",
+ NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+ .map_io = mx51_map_io,
+ .init_early = imx51_init_early,
+ .init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
+ .timer = &imx51_timer,
+ .init_machine = imx51_dt_init,
+ .dt_compat = imx51_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
new file mode 100644
index 0000000..ccaa0b8
--- /dev/null
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx53.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 7; /* imx53 gets 7 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx53_irq_match[] __initconst = {
+ { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx53_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx53_irq_match);
+
+ node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx53_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
+}
+
+static void __init imx53_timer_init(void)
+{
+ mx53_clocks_init_dt();
+}
+
+static struct sys_timer imx53_timer = {
+ .init = imx53_timer_init,
+};
+
+static const char *imx53_dt_board_compat[] __initdata = {
+ "fsl,imx53-ard",
+ "fsl,imx53-evk",
+ "fsl,imx53-qsb",
+ "fsl,imx53-smd",
+ NULL
+};
+
+DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
+ .timer = &imx53_timer,
+ .init_machine = imx53_dt_init,
+ .dt_compat = imx53_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
deleted file mode 100644
index 77e374c..0000000
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
- imx_map_entry(MX50, TZIC, MT_DEVICE),
- imx_map_entry(MX50, SPBA0, MT_DEVICE),
- imx_map_entry(MX50, AIPS1, MT_DEVICE),
- imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
- iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX50);
- mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
- tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init imx50_soc_init(void)
-{
- /* i.mx50 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
- mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
- mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index baea6e5..26eacc9 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -21,12 +21,27 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
+static void imx5_idle(void)
+{
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+}
+
+/*
+ * Define the MX50 memory map.
+ */
+static struct map_desc mx50_io_desc[] __initdata = {
+ imx_map_entry(MX50, TZIC, MT_DEVICE),
+ imx_map_entry(MX50, SPBA0, MT_DEVICE),
+ imx_map_entry(MX50, AIPS1, MT_DEVICE),
+ imx_map_entry(MX50, AIPS2, MT_DEVICE),
+};
+
/*
* Define the MX51 memory map.
*/
static struct map_desc mx51_io_desc[] __initdata = {
+ imx_map_entry(MX51, TZIC, MT_DEVICE),
imx_map_entry(MX51, IRAM, MT_DEVICE),
- imx_map_entry(MX51, DEBUG, MT_DEVICE),
imx_map_entry(MX51, AIPS1, MT_DEVICE),
imx_map_entry(MX51, SPBA0, MT_DEVICE),
imx_map_entry(MX51, AIPS2, MT_DEVICE),
@@ -36,6 +51,7 @@
* Define the MX53 memory map.
*/
static struct map_desc mx53_io_desc[] __initdata = {
+ imx_map_entry(MX53, TZIC, MT_DEVICE),
imx_map_entry(MX53, AIPS1, MT_DEVICE),
imx_map_entry(MX53, SPBA0, MT_DEVICE),
imx_map_entry(MX53, AIPS2, MT_DEVICE),
@@ -46,21 +62,34 @@
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
+void __init mx50_map_io(void)
+{
+ iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
+}
+
void __init mx51_map_io(void)
{
iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
}
+void __init mx53_map_io(void)
+{
+ iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+}
+
+void __init imx50_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX50);
+ mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+}
+
void __init imx51_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-}
-
-void __init mx53_map_io(void)
-{
- iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+ imx_idle = imx5_idle;
}
void __init imx53_init_early(void)
@@ -70,35 +99,19 @@
mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
}
+void __init mx50_init_irq(void)
+{
+ tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
+}
+
void __init mx51_init_irq(void)
{
- unsigned long tzic_addr;
- void __iomem *tzic_virt;
-
- if (mx51_revision() < IMX_CHIP_REVISION_2_0)
- tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
- else
- tzic_addr = MX51_TZIC_BASE_ADDR;
-
- tzic_virt = ioremap(tzic_addr, SZ_16K);
- if (!tzic_virt)
- panic("unable to map TZIC interrupt controller\n");
-
- tzic_init_irq(tzic_virt);
+ tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
}
void __init mx53_init_irq(void)
{
- unsigned long tzic_addr;
- void __iomem *tzic_virt;
-
- tzic_addr = MX53_TZIC_BASE_ADDR;
-
- tzic_virt = ioremap(tzic_addr, SZ_16K);
- if (!tzic_virt)
- panic("unable to map TZIC interrupt controller\n");
-
- tzic_init_irq(tzic_virt);
+ tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
@@ -138,13 +151,24 @@
.script_addrs = &imx53_sdma_script,
};
+void __init imx50_soc_init(void)
+{
+ /* i.mx50 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+ mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+}
+
void __init imx51_soc_init(void)
{
/* i.mx51 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index c920945..ec6ca91 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -34,14 +34,12 @@
#include <linux/usb/ulpi.h>
#include <mach/ulpi.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#include "cpu_op-mx51.h"
@@ -133,7 +131,7 @@
u32 v;
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +148,7 @@
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
@@ -170,7 +168,7 @@
gpio_set_value(EFIKAMX_USBH1_STP, 1);
msleep(1);
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
/* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +187,7 @@
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -217,9 +215,9 @@
usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
if (usbh1_config.otg)
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
}
static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -567,7 +565,7 @@
};
static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
+ .flags = MC13XXX_USE_RTC,
.regulators = {
.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
.regulators = mx51_efika_regulators,
@@ -589,7 +587,7 @@
.bus_num = 0,
.chip_select = 0,
.platform_data = &mx51_efika_mc13892_data,
- .irq = gpio_to_irq(EFIKAMX_PMIC),
+ .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
},
};
@@ -609,7 +607,6 @@
ARRAY_SIZE(mx51efika_pads));
imx51_add_imx_uart(0, &uart_pdata);
mx51_efika_usb();
- imx51_add_sdhci_esdhc_imx(0, NULL);
/* FIXME: comes from original code. check this. */
if (mx51_revision() < IMX_CHIP_REVISION_2_0)
@@ -627,8 +624,9 @@
ARRAY_SIZE(mx51_efika_spi_board_info));
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
+ imx51_add_pata_imx();
+
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
}
-
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
index e4529af..98052fc 100644
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ b/arch/arm/mach-mx5/pm-imx5.c
@@ -14,14 +14,19 @@
#include <linux/err.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-#include <mach/system.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
#include "crm_regs.h"
static struct clk *gpc_dvfs_clk;
+static int mx5_suspend_prepare(void)
+{
+ return clk_enable(gpc_dvfs_clk);
+}
+
static int mx5_suspend_enter(suspend_state_t state)
{
- clk_enable(gpc_dvfs_clk);
switch (state) {
case PM_SUSPEND_MEM:
mx5_cpu_lp_set(STOP_POWER_OFF);
@@ -42,11 +47,14 @@
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
- clk_disable(gpc_dvfs_clk);
-
return 0;
}
+static void mx5_suspend_finish(void)
+{
+ clk_disable(gpc_dvfs_clk);
+}
+
static int mx5_pm_valid(suspend_state_t state)
{
return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
@@ -54,7 +62,9 @@
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
+ .prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
+ .finish = mx5_suspend_finish,
};
static int __init mx5_pm_init(void)
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
index 76ae8dc..144ebeb 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-mx5/system.c
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include "crm_regs.h"
/* set cpu low power mode before WFI instruction. This function is called
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4cd0231..cf00b3e3 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -23,6 +23,7 @@
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
help
Include support for STMP378x-devb platform. This includes specific
configurations for the board and its peripherals.
@@ -34,6 +35,7 @@
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
help
Include support for MX23EVK platform. This includes specific
configurations for the board and its peripherals.
@@ -48,6 +50,9 @@
select MXS_HAVE_PLATFORM_FLEXCAN
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_HAVE_PLATFORM_MXS_SAIF
+ select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
select MXS_OCOTP
help
Include support for MX28EVK platform. This includes specific
@@ -63,9 +68,27 @@
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
+
+config MODULE_M28
+ bool
+ select SOC_IMX28
+ select LEDS_GPIO_REGISTER
+ select MXS_HAVE_AMBA_DUART
+ select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_FEC
+ select MXS_HAVE_PLATFORM_FLEXCAN
+ select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_MXS_MMC
+ select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_OCOTP
config MACH_TX28
bool "Ka-Ro TX28 module"
select MODULE_TX28
+config MACH_M28EVK
+ bool "Support DENX M28EVK Platform"
+ select MODULE_M28
+
endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 6c38262..8c93b24 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,15 +1,16 @@
# Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
+obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
obj-$(CONFIG_MACH_TX28) += mach-tx28.o
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5dcc59d..229ae34 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -349,7 +349,7 @@
\
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \
- reg |= frac; \
+ reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
} \
\
@@ -640,6 +640,8 @@
_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
+ _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
+ _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
};
static int clk_misc_init(void)
@@ -708,11 +710,11 @@
/* SAIF has to use frac div for functional operation */
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
- reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
+ reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
- reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
+ reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
/*
@@ -738,11 +740,17 @@
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
- /* Extra fec clock setting */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
- reg &= ~BM_CLKCTRL_ENET_SLEEP;
- reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * Extra fec clock setting
+ * The DENX M28 uses an external clock source
+ * and the clock output must not be enabled
+ */
+ if (!machine_is_m28evk()) {
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ reg &= ~BM_CLKCTRL_ENET_SLEEP;
+ reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ }
/*
* 480 MHz seems too high to be ssp clock source directly,
@@ -774,6 +782,8 @@
clk_enable(&uart_clk);
clk_set_parent(&lcdif_clk, &ref_pix_clk);
+ clk_set_parent(&saif0_clk, &pll0_clk);
+ clk_set_parent(&saif1_clk, &pll0_clk);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index c6f345f..3fa651d 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -29,3 +29,5 @@
struct platform_device *__init mx23_add_mxsfb(
const struct mxsfb_platform_data *pdata);
+
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 79b9452..c888710 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -45,3 +45,8 @@
struct platform_device *__init mx28_add_mxsfb(
const struct mxsfb_platform_data *pdata);
+
+extern const struct mxs_saif_data mx28_saif_data[] __initconst;
+#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id])
+
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index acf9eea..18b6bf5 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -23,3 +23,9 @@
config MXS_HAVE_PLATFORM_MXSFB
bool
+
+config MXS_HAVE_PLATFORM_MXS_SAIF
+ bool
+
+config MXS_HAVE_PLATFORM_RTC_STMP3XXX
+ bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 351915c..f52e3e5 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -8,3 +8,5 @@
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
obj-y += platform-gpio-mxs.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
new file mode 100644
index 0000000..1ec965e
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_saif_data_entry_single(soc, _id) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \
+ .irq = soc ## _INT_SAIF ## _id, \
+ .dma = soc ## _DMA_SAIF ## _id, \
+ .dmairq = soc ## _INT_SAIF ## _id ##_DMA, \
+ }
+
+#define mxs_saif_data_entry(soc, _id) \
+ [_id] = mxs_saif_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_saif_data mx28_saif_data[] __initconst = {
+ mxs_saif_data_entry(MX28, 0),
+ mxs_saif_data_entry(MX28, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->dma,
+ .end = data->dma,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = data->dmairq,
+ .end = data->dmairq,
+ .flags = IORESOURCE_IRQ,
+ },
+
+ };
+
+ return mxs_add_platform_device("mxs-saif", data->id, res,
+ ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
new file mode 100644
index 0000000..639eaee
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#ifdef CONFIG_SOC_IMX23
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
+{
+ struct resource res[] = {
+ {
+ .start = MX23_RTC_BASE_ADDR,
+ .end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX23_INT_RTC_ALARM,
+ .end = MX23_INT_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+ NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX23 */
+
+#ifdef CONFIG_SOC_IMX28
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
+{
+ struct resource res[] = {
+ {
+ .start = MX28_RTC_BASE_ADDR,
+ .end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX28_INT_RTC_ALARM,
+ .end = MX28_INT_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+ NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 79650a1..90c6b78 100644
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -14,23 +14,15 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
-#ifdef CONFIG_SOC_IMX23
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#ifdef CONFIG_DEBUG_IMX23_UART
#define UART_PADDR MX23_DUART_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX28_UART)
#define UART_PADDR MX28_DUART_BASE_ADDR
#endif
#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 812d7a8..a8080f4 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -92,3 +92,15 @@
/* pwm */
struct platform_device *__init mxs_add_mxs_pwm(
resource_size_t iobase, int id);
+
+/* saif */
+struct mxs_saif_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t irq;
+ resource_size_t dma;
+ resource_size_t dmairq;
+};
+
+struct platform_device *__init mxs_add_saif(
+ const struct mxs_saif_data *data);
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
index 828cccc..40a8c178 100644
--- a/arch/arm/mach-mxs/include/mach/gpio.h
+++ b/arch/arm/mach-mxs/include/mach/gpio.h
@@ -1,35 +1 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_GPIO_H__
-#define __MACH_MXS_GPIO_H__
-
-#include <asm-generic/gpio.h>
-
-#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
-
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
-
-#endif /* __MACH_MXS_GPIO_H__ */
+/* empty */
diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
deleted file mode 100644
index b5420a5..0000000
--- a/arch/arm/mach-mxs/include/mach/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_MEMORY_H__
-#define __MACH_MXS_MEMORY_H__
-
-#define PHYS_OFFSET UL(0x40000000)
-
-#endif /* __MACH_MXS_MEMORY_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 35a89dd27..0d2d2b4 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -33,6 +33,7 @@
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
+ machine_is_m28evk() || \
machine_is_tx28() || \
0)
@@ -86,6 +87,8 @@
.type = _type, \
}
+#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
+
#define MXS_SET_ADDR 0x4
#define MXS_CLR_ADDR 0x8
#define MXS_TOG_ADDR 0xc
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 7f8bf65..6777674 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -63,6 +63,7 @@
mxs_duart_base = MX23_DUART_BASE_ADDR;
break;
case MACH_TYPE_MX28EVK:
+ case MACH_TYPE_M28EVK:
case MACH_TYPE_TX28:
mxs_duart_base = MX28_DUART_BASE_ADDR;
break;
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
new file mode 100644
index 0000000..3b1681e
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16)
+#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17)
+
+#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
+#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28)
+
+#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
+
+static const iomux_cfg_t m28evk_pads[] __initconst = {
+ /* duart */
+ MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
+
+ /* auart0 */
+ MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+
+ /* auart3 */
+ MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+ /* fec0 */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+ /* fec1 */
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
+
+ /* flexcan0 */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* flexcan1 */
+ MX28_PAD_GPMI_CE2N__CAN1_TX,
+ MX28_PAD_GPMI_CE3N__CAN1_RX,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* mxsfb (lcdif) */
+ MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
+
+ /* mmc0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA1__SSP0_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA2__SSP0_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA3__SSP0_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA4__SSP0_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA5__SSP0_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA6__SSP0_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA7__SSP0_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_CMD__SSP0_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* mmc1 */
+ MX28_PAD_GPMI_D00__SSP1_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D01__SSP1_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D02__SSP1_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D03__SSP1_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D04__SSP1_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D05__SSP1_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D06__SSP1_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D07__SSP1_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY1__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_WRN__SSP1_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM4__GPIO_3_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* led */
+ MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
+ MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
+
+ /* nand */
+ MX28_PAD_GPMI_D00__GPMI_D0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D01__GPMI_D1 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D02__GPMI_D2 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D03__GPMI_D3 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D04__GPMI_D4 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D05__GPMI_D5 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D06__GPMI_D6 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D07__GPMI_D7 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_ALE__GPMI_ALE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_CLE__GPMI_CLE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+
+ /* Backlight */
+ MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led m28evk_leds[] __initconst = {
+ {
+ .name = "user-led1",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED1,
+ },
+ {
+ .name = "user-led2",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED2,
+ },
+};
+
+static const struct gpio_led_platform_data m28evk_led_data __initconst = {
+ .leds = m28evk_leds,
+ .num_leds = ARRAY_SIZE(m28evk_leds),
+};
+
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
+ {
+ /* fec0 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ }, {
+ /* fec1 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ },
+};
+
+static int __init m28evk_fec_get_mac(void)
+{
+ int i;
+ u32 val;
+ const u32 *ocotp = mxs_get_ocotp();
+
+ if (!ocotp) {
+ pr_err("%s: timeout when reading fec mac from OCOTP\n",
+ __func__);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * OCOTP only stores the last 4 octets for each mac address,
+ * so hard-code DENX OUI (C0:E5:4E) here.
+ */
+ for (i = 0; i < 2; i++) {
+ val = ocotp[i * 4];
+ mx28_fec_pdata[i].mac[0] = 0xC0;
+ mx28_fec_pdata[i].mac[1] = 0xE5;
+ mx28_fec_pdata[i].mac[2] = 0x4E;
+ mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+ mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+ mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+ }
+
+ return 0;
+}
+
+/* mxsfb (lcdif) */
+static struct fb_videomode m28evk_video_modes[] = {
+ {
+ .name = "Ampire AM-800480R2TMQW-T01H",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30066, /* picosecond (33.26 MHz) */
+ .left_margin = 0,
+ .right_margin = 256,
+ .upper_margin = 0,
+ .lower_margin = 45,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
+ },
+};
+
+static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
+ .mode_list = m28evk_video_modes,
+ .mode_count = ARRAY_SIZE(m28evk_video_modes),
+ .default_bpp = 16,
+ .ld_intf_width = STMLCDIF_18BIT,
+};
+
+static struct at24_platform_data m28evk_eeprom = {
+ .byte_len = 16384,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
+ {
+ I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */
+ .platform_data = &m28evk_eeprom,
+ },
+};
+
+static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
+ {
+ /* mmc0 */
+ .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ }, {
+ /* mmc1 */
+ .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ },
+};
+
+static void __init m28evk_init(void)
+{
+ mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
+
+ mx28_add_duart();
+ mx28_add_auart0();
+ mx28_add_auart3();
+
+ if (!m28evk_fec_get_mac()) {
+ mx28_add_fec(0, &mx28_fec_pdata[0]);
+ mx28_add_fec(1, &mx28_fec_pdata[1]);
+ }
+
+ mx28_add_flexcan(0, NULL);
+ mx28_add_flexcan(1, NULL);
+
+ mx28_add_mxsfb(&m28evk_mxsfb_pdata);
+
+ mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
+ mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
+
+ gpio_led_register_device(0, &m28evk_led_data);
+
+ /* I2C */
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
+ ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
+}
+
+static void __init m28evk_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer m28evk_timer = {
+ .init = m28evk_timer_init,
+};
+
+MACHINE_START(M28EVK, "DENX M28 EVK")
+ .map_io = mx28_map_io,
+ .init_irq = mx28_init_irq,
+ .init_machine = m28evk_init,
+ .timer = &m28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 3c2de33..c325fbe 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -15,7 +15,6 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -167,6 +166,7 @@
gpio_set_value(MX23EVK_BL_ENABLE, 1);
mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
+ mx23_add_rtc_stmp3xxx();
}
static void __init mx23evk_timer_init(void)
@@ -182,6 +182,6 @@
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
- .init_machine = mx23evk_init,
.timer = &mx23evk_timer,
+ .init_machine = mx23evk_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index eaaf6ff..ac2316d 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -16,8 +16,10 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/irq.h>
#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -183,6 +185,24 @@
/* led */
MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_I2C0_SDA__I2C0_SDA |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+
+ /* saif0 & saif1 */
+ MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
};
/* led */
@@ -352,6 +372,55 @@
},
};
+static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("sgtl5000", 0x0a),
+ },
+};
+
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("VDDA", "0-000a"),
+ REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data mx28evk_vdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .always_on = 1,
+ },
+ .consumer_supplies = mx28evk_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config mx28evk_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 1,
+ .init_data = &mx28evk_vdd_reg_init_data,
+};
+static struct platform_device mx28evk_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mx28evk_vdd_pdata,
+ },
+};
+static void __init mx28evk_add_regulators(void)
+{
+ platform_device_register(&mx28evk_voltage_regulator);
+}
+#else
+static void __init mx28evk_add_regulators(void) {}
+#endif
+
+static struct gpio mx28evk_lcd_gpios[] = {
+ { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
+ { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+};
+
static void __init mx28evk_init(void)
{
int ret;
@@ -378,19 +447,24 @@
mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
}
- ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
+ ret = gpio_request_array(mx28evk_lcd_gpios,
+ ARRAY_SIZE(mx28evk_lcd_gpios));
if (ret)
- pr_warn("failed to request gpio lcd-enable: %d\n", ret);
+ pr_warn("failed to request gpio pins for lcd: %d\n", ret);
else
- gpio_set_value(MX28EVK_LCD_ENABLE, 1);
+ mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
- ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
- if (ret)
- pr_warn("failed to request gpio bl-enable: %d\n", ret);
- else
- gpio_set_value(MX28EVK_BL_ENABLE, 1);
+ mx28_add_saif(0);
+ mx28_add_saif(1);
- mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, mxs_i2c0_board_info,
+ ARRAY_SIZE(mxs_i2c0_board_info));
+
+ mx28evk_add_regulators();
+
+ mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
+ NULL, 0);
/* power on mmc slot by writing 0 to the gpio */
ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
@@ -403,7 +477,11 @@
"mmc1-slot-power");
if (ret)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+ else
+ mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+ mx28_add_rtc_stmp3xxx();
gpio_led_register_device(0, &mx28evk_led_data);
}
@@ -421,6 +499,6 @@
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = mx28evk_init,
.timer = &mx28evk_timer,
+ .init_machine = mx28evk_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index 7f38d82..177e531 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -19,7 +19,6 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/irq.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
@@ -91,6 +90,7 @@
mx23_add_duart();
mx23_add_auart0();
+ mx23_add_rtc_stmp3xxx();
/* power on mmc slot */
ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 515a423..9a1f0e7 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -161,6 +161,7 @@
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
+ mx28_add_rtc_stmp3xxx();
}
static void __init tx28_timer_init(void)
@@ -175,6 +176,6 @@
MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = tx28_stk5v3_init,
.timer = &tx28_timer,
+ .init_machine = tx28_stk5v3_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c
deleted file mode 100644
index 1b2345a..0000000
--- a/arch/arm/mach-mxs/mm-mx23.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
- mxs_map_entry(MX23, OCRAM, MT_DEVICE),
- mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
- iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx23_init_irq(void)
-{
- icoll_init_irq();
-}
diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c
deleted file mode 100644
index b6e18dd..0000000
--- a/arch/arm/mach-mxs/mm-mx28.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
- mxs_map_entry(MX28, OCRAM, MT_DEVICE),
- mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx28_map_io(void)
-{
- iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}
-
-void __init mx28_init_irq(void)
-{
- icoll_init_irq();
-}
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
new file mode 100644
index 0000000..50af5ce
--- /dev/null
+++ b/arch/arm/mach-mxs/mm.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/common.h>
+#include <mach/iomux.h>
+
+/*
+ * Define the MX23 memory map.
+ */
+static struct map_desc mx23_io_desc[] __initdata = {
+ mxs_map_entry(MX23, OCRAM, MT_DEVICE),
+ mxs_map_entry(MX23, IO, MT_DEVICE),
+};
+
+/*
+ * Define the MX28 memory map.
+ */
+static struct map_desc mx28_io_desc[] __initdata = {
+ mxs_map_entry(MX28, OCRAM, MT_DEVICE),
+ mxs_map_entry(MX28, IO, MT_DEVICE),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx23_map_io(void)
+{
+ iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
+}
+
+void __init mx23_init_irq(void)
+{
+ icoll_init_irq();
+}
+
+void __init mx28_map_io(void)
+{
+ iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
+}
+
+void __init mx28_init_irq(void)
+{
+ icoll_init_irq();
+}
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 56a9152..247781e 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00000a00
orr \rv, \rp, #io_p2v(0x00100000) @ virtual
orr \rp, \rp, #0x00100000 @ physical
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
deleted file mode 100644
index 5956149..0000000
--- a/arch/arm/mach-netx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
-
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ca8b203..90903dd 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,7 +200,7 @@
}
MACHINE_START(NXDB500, "Hilscher nxdb500")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index d775cbe..c63384a 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,7 +93,7 @@
}
MACHINE_START(NXDKN, "Hilscher nxdkn")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index de369cd..8f548ec 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,7 +177,7 @@
}
MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 1399303..0cbb74c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
#include <mach/setup.h>
@@ -276,7 +277,7 @@
MACHINE_START(NOMADIK, "NHK8815")
/* Maintainer: ST MicroElectronics */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = cpu8815_map_io,
.init_irq = cpu8815_init_irq,
.timer = &nomadik_timer,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index ac58e3b..dc67717 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -21,8 +21,8 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index abfe25a..0fc2f6f 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -3,8 +3,8 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <plat/gpio-nomadik.h>
/*
* There are two busses in the 8815NHK.
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e7151b4..7354179 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00100000
add \rp, \rp, #0x000fb000
add \rv, \rp, #0xf0000000 @ virtual base
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 7a81a04..efdde0a 100644
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -1,6 +1,4 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
deleted file mode 100644
index d332521..0000000
--- a/arch/arm/mach-nomadik/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * mach-nomadik/include/mach/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/Kconfig b/arch/arm/mach-nuc93x/Kconfig
deleted file mode 100644
index 2bc40a2..0000000
--- a/arch/arm/mach-nuc93x/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if ARCH_NUC93X
-
-config CPU_NUC932
- bool
- help
- Support for NUC932 of Nuvoton NUC93X CPUs.
-
-menu "NUC932 Machines"
-
-config MACH_NUC932EVB
- bool "Nuvoton NUC932 Evaluation Board"
- default y
- select CPU_NUC932
- help
- Say Y here if you are using the Nuvoton NUC932EVB
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-nuc93x/Makefile b/arch/arm/mach-nuc93x/Makefile
deleted file mode 100644
index 440e2de..0000000
--- a/arch/arm/mach-nuc93x/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := irq.o time.o dev.o cpu.o clock.o
-# NUC932 CPU support files
-
-obj-$(CONFIG_CPU_NUC932) += nuc932.o
-
-# machine support
-
-obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o
diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot
deleted file mode 100644
index 6c3d421..0000000
--- a/arch/arm/mach-nuc93x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-
diff --git a/arch/arm/mach-nuc93x/clock.c b/arch/arm/mach-nuc93x/clock.c
deleted file mode 100644
index 0521efb..0000000
--- a/arch/arm/mach-nuc93x/clock.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/clock.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (clk->enabled++ == 0)
- (clk->enable)(clk, 1);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- WARN_ON(clk->enabled == 0);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->enabled == 0)
- (clk->enable)(clk, 0);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return 27000000;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void nuc93x_clk_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->cken;
- unsigned long clken;
-
- clken = __raw_readl(NUC93X_VA_CLKPWR);
-
- if (enable)
- clken |= clocks;
- else
- clken &= ~clocks;
-
- __raw_writel(clken, NUC93X_VA_CLKPWR);
-}
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
- int i;
-
- for (i = 0; i < num; i++)
- clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h
deleted file mode 100644
index 4de1f1d..0000000
--- a/arch/arm/mach-nuc93x/clock.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/clkdev.h>
-
-void nuc93x_clk_enable(struct clk *clk, int enable);
-void clks_register(struct clk_lookup *clks, size_t num);
-
-struct clk {
- unsigned long cken;
- unsigned int enabled;
- void (*enable)(struct clk *, int enable);
-};
-
-#define DEFINE_CLK(_name, _ctrlbit) \
-struct clk clk_##_name = { \
- .enable = nuc93x_clk_enable, \
- .cken = (1 << _ctrlbit), \
- }
-
-#define DEF_CLKLOOK(_clk, _devname, _conname) \
- { \
- .clk = _clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
diff --git a/arch/arm/mach-nuc93x/cpu.c b/arch/arm/mach-nuc93x/cpu.c
deleted file mode 100644
index f6ff5d8..0000000
--- a/arch/arm/mach-nuc93x/cpu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/cpu.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC93x series cpu common support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc nuc93x_iodesc[] __initdata = {
- IODESC_ENT(IRQ),
- IODESC_ENT(GCR),
- IODESC_ENT(UART),
- IODESC_ENT(TIMER),
- IODESC_ENT(EBI),
-};
-
-/* Initial nuc932 clock declarations. */
-static DEFINE_CLK(audio, 2);
-static DEFINE_CLK(sd, 3);
-static DEFINE_CLK(jpg, 4);
-static DEFINE_CLK(video, 5);
-static DEFINE_CLK(vpost, 6);
-static DEFINE_CLK(2d, 7);
-static DEFINE_CLK(gpu, 8);
-static DEFINE_CLK(gdma, 9);
-static DEFINE_CLK(adc, 10);
-static DEFINE_CLK(uart, 11);
-static DEFINE_CLK(spi, 12);
-static DEFINE_CLK(pwm, 13);
-static DEFINE_CLK(timer, 14);
-static DEFINE_CLK(wdt, 15);
-static DEFINE_CLK(ac97, 16);
-static DEFINE_CLK(i2s, 16);
-static DEFINE_CLK(usbck, 17);
-static DEFINE_CLK(usb48, 18);
-static DEFINE_CLK(usbh, 19);
-static DEFINE_CLK(i2c, 20);
-static DEFINE_CLK(ext, 0);
-
-static struct clk_lookup nuc932_clkregs[] = {
- DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
- DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
- DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
- DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
- DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
- DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
- DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
- DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
- DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
- DEF_CLKLOOK(&clk_uart, NULL, "uart"),
- DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
- DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
- DEF_CLKLOOK(&clk_timer, NULL, "timer"),
- DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
- DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
- DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
- DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
- DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
- DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
- DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
- DEF_CLKLOOK(&clk_ext, NULL, "ext"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port nuc93x_uart_data[] = {
- NUC93X_8250PORT(UART0),
- {},
-};
-
-struct platform_device nuc93x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = nuc93x_uart_data,
- },
-};
-
-/*Init NUC93x evb io*/
-
-void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(mach_desc, mach_size);
- iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
-
- idcode = __raw_readl(NUC93XPDID);
- if (idcode == NUC932_CPUID)
- printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
- else
- printk(KERN_ERR "CPU type detect error!\n");
-
-}
-
-/*Init NUC93x clock*/
-
-void __init nuc93x_init_clocks(void)
-{
- clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
-}
-
diff --git a/arch/arm/mach-nuc93x/cpu.h b/arch/arm/mach-nuc93x/cpu.h
deleted file mode 100644
index 9def28197..0000000
--- a/arch/arm/mach-nuc93x/cpu.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/cpu.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Header file for NUC93X CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define IODESC_ENT(y) \
-{ \
- .virtual = (unsigned long)NUC93X_VA_##y, \
- .pfn = __phys_to_pfn(NUC93X_PA_##y), \
- .length = NUC93X_SZ_##y, \
- .type = MT_DEVICE, \
-}
-
-#define NUC93X_8250PORT(name) \
-{ \
- .membase = name##_BA, \
- .mapbase = name##_PA, \
- .irq = IRQ_##name, \
- .uartclk = 57139200, \
- .regshift = 2, \
- .iotype = UPIO_MEM, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
-}
-
-/*Cpu identifier register*/
-
-#define NUC93XPDID NUC93X_VA_GCR
-#define NUC932_CPUID 0x29550091
-
-/* extern file from cpu.c */
-
-extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
-extern void nuc93x_init_clocks(void);
-extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
-extern void nuc93x_board_init(struct platform_device **device, int size);
-extern struct platform_device nuc93x_serial_device;
-
diff --git a/arch/arm/mach-nuc93x/dev.c b/arch/arm/mach-nuc93x/dev.c
deleted file mode 100644
index a962ae9..0000000
--- a/arch/arm/mach-nuc93x/dev.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/dev.c
- *
- * Copyright (C) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include "cpu.h"
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *nuc93x_public_dev[] __initdata = {
- &nuc93x_serial_device,
-};
-
-/* Provide adding specific CPU platform devices API */
-
-void __init nuc93x_board_init(struct platform_device **device, int size)
-{
- platform_add_devices(device, size);
- platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
-}
-
diff --git a/arch/arm/mach-nuc93x/include/mach/entry-macro.S b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
deleted file mode 100644
index 1352cbd..0000000
--- a/arch/arm/mach-nuc93x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/entry-macro.S
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #AIC_BA
-
- ldr \irqnr, [ \base, #AIC_IPER]
- ldr \irqnr, [ \base, #AIC_ISNR]
- cmp \irqnr, #0
-
- .endm
-
- /* currently don't need an disable_fiq macro */
-
- .macro disable_fiq
- .endm
diff --git a/arch/arm/mach-nuc93x/include/mach/hardware.h b/arch/arm/mach-nuc93x/include/mach/hardware.h
deleted file mode 100644
index fb5c6fc..0000000
--- a/arch/arm/mach-nuc93x/include/mach/hardware.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/hardware.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/io.h b/arch/arm/mach-nuc93x/include/mach/io.h
deleted file mode 100644
index 72e5051..0000000
--- a/arch/arm/mach-nuc93x/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/io.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-
-#define __mem_pci(a) (a)
-#define __io(a) __typesafe_io(a)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/irqs.h b/arch/arm/mach-nuc93x/include/mach/irqs.h
deleted file mode 100644
index 7c4aa71..0000000
--- a/arch/arm/mach-nuc93x/include/mach/irqs.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/irqs.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NUC93X_IRQ(x) (x)
-
-/* Main cpu interrupts */
-
-#define IRQ_WDT NUC93X_IRQ(1)
-#define IRQ_IRQ0 NUC93X_IRQ(2)
-#define IRQ_IRQ1 NUC93X_IRQ(3)
-#define IRQ_IRQ2 NUC93X_IRQ(4)
-#define IRQ_IRQ3 NUC93X_IRQ(5)
-#define IRQ_USBH NUC93X_IRQ(6)
-#define IRQ_APU NUC93X_IRQ(7)
-#define IRQ_VPOST NUC93X_IRQ(8)
-#define IRQ_ADC NUC93X_IRQ(9)
-#define IRQ_UART0 NUC93X_IRQ(10)
-#define IRQ_TIMER0 NUC93X_IRQ(11)
-#define IRQ_GPU0 NUC93X_IRQ(12)
-#define IRQ_GPU1 NUC93X_IRQ(13)
-#define IRQ_GPU2 NUC93X_IRQ(14)
-#define IRQ_GPU3 NUC93X_IRQ(15)
-#define IRQ_GPU4 NUC93X_IRQ(16)
-#define IRQ_VIN NUC93X_IRQ(17)
-#define IRQ_USBD NUC93X_IRQ(18)
-#define IRQ_VRAMLD NUC93X_IRQ(19)
-#define IRQ_GDMA0 NUC93X_IRQ(20)
-#define IRQ_GDMA1 NUC93X_IRQ(21)
-#define IRQ_SDIO NUC93X_IRQ(22)
-#define IRQ_FMI NUC93X_IRQ(22)
-#define IRQ_JPEG NUC93X_IRQ(23)
-#define IRQ_SPI0 NUC93X_IRQ(24)
-#define IRQ_SPI1 NUC93X_IRQ(25)
-#define IRQ_RTC NUC93X_IRQ(26)
-#define IRQ_PWM0 NUC93X_IRQ(27)
-#define IRQ_PWM1 NUC93X_IRQ(28)
-#define IRQ_PWM2 NUC93X_IRQ(29)
-#define IRQ_PWM3 NUC93X_IRQ(30)
-#define IRQ_I2SAC97 NUC93X_IRQ(31)
-#define IRQ_CAP0 IRQ_PWM0
-#define IRQ_CAP1 IRQ_PWM1
-#define IRQ_CAP2 IRQ_PWM2
-#define IRQ_CAP3 IRQ_PWM3
-#define NR_IRQS (IRQ_I2SAC97 + 1)
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/map.h b/arch/arm/mach-nuc93x/include/mach/map.h
deleted file mode 100644
index fd0b5e8..0000000
--- a/arch/arm/mach-nuc93x/include/mach/map.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/map.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#define MAP_OFFSET (0xfff00000)
-#define CLK_OFFSET (0x10)
-
-#ifndef __ASSEMBLY__
-#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
-#else
-#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET)))
-#endif
-
- /*
- * nuc932 hardware register definition
- */
-
-#define NUC93X_PA_IRQ (0xFFF83000)
-#define NUC93X_PA_GCR (0xFFF00000)
-#define NUC93X_PA_EBI (0xFFF01000)
-#define NUC93X_PA_UART (0xFFF80000)
-#define NUC93X_PA_TIMER (0xFFF81000)
-#define NUC93X_PA_GPIO (0xFFF84000)
-#define NUC93X_PA_GDMA (0xFFF03000)
-#define NUC93X_PA_USBHOST (0xFFF0d000)
-#define NUC93X_PA_I2C (0xFFF89000)
-#define NUC93X_PA_LCD (0xFFF06000)
-#define NUC93X_PA_GE (0xFFF05000)
-#define NUC93X_PA_ADC (0xFFF85000)
-#define NUC93X_PA_RTC (0xFFF87000)
-#define NUC93X_PA_PWM (0xFFF82000)
-#define NUC93X_PA_ACTL (0xFFF0a000)
-#define NUC93X_PA_USBDEV (0xFFF0C000)
-#define NUC93X_PA_JEPEG (0xFFF0e000)
-#define NUC93X_PA_CACHE_T (0xFFF60000)
-#define NUC93X_PA_VRAM (0xFFF0b000)
-#define NUC93X_PA_DMAC (0xFFF09000)
-#define NUC93X_PA_I2SM (0xFFF08000)
-#define NUC93X_PA_CACHE (0xFFF02000)
-#define NUC93X_PA_GPU (0xFFF04000)
-#define NUC93X_PA_VIDEOIN (0xFFF07000)
-#define NUC93X_PA_SPI0 (0xFFF86000)
-#define NUC93X_PA_SPI1 (0xFFF88000)
-
- /*
- * nuc932 virtual address mapping.
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-
-#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000)
-#define NUC93X_SZ_IRQ SZ_4K
-
-#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ)
-#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET)
-#define NUC93X_SZ_GCR SZ_4K
-
-/* EBI management */
-
-#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI)
-#define NUC93X_SZ_EBI SZ_4K
-
-/* UARTs */
-
-#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART)
-#define NUC93X_SZ_UART SZ_4K
-
-/* Timers */
-
-#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER)
-#define NUC93X_SZ_TIMER SZ_4K
-
-/* GPIO ports */
-
-#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO)
-#define NUC93X_SZ_GPIO SZ_4K
-
-/* GDMA control */
-
-#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA)
-#define NUC93X_SZ_GDMA SZ_4K
-
-/* I2C hardware controller */
-
-#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C)
-#define NUC93X_SZ_I2C SZ_4K
-
-/* LCD controller*/
-
-#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD)
-#define NUC93X_SZ_LCD SZ_4K
-
-/* 2D controller*/
-
-#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE)
-#define NUC93X_SZ_GE SZ_4K
-
-/* ADC */
-
-#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC)
-#define NUC93X_SZ_ADC SZ_4K
-
-/* RTC */
-
-#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC)
-#define NUC93X_SZ_RTC SZ_4K
-
-/* Pulse Width Modulation(PWM) Registers */
-
-#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM)
-#define NUC93X_SZ_PWM SZ_4K
-
-/* Audio Controller controller */
-
-#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL)
-#define NUC93X_SZ_ACTL SZ_4K
-
-/* USB Device port */
-
-#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV)
-#define NUC93X_SZ_USBDEV SZ_4K
-
-/* USB host controller*/
-#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST)
-#define NUC93X_SZ_USBHOST SZ_4K
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
deleted file mode 100644
index ef9864b..0000000
--- a/arch/arm/mach-nuc93x/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-clock.h b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
deleted file mode 100644
index 5cb2954..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-clock.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H
-
-/* Clock Control Registers */
-#define CLK_BA NUC93X_VA_CLKPWR
-#define REG_CLKEN (CLK_BA + 0x00)
-#define REG_CLKSEL (CLK_BA + 0x04)
-#define REG_CLKDIV (CLK_BA + 0x08)
-#define REG_PLLCON0 (CLK_BA + 0x0C)
-#define REG_PLLCON1 (CLK_BA + 0x10)
-#define REG_PMCON (CLK_BA + 0x14)
-#define REG_IRQWAKECON (CLK_BA + 0x18)
-#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
-#define REG_IPSRST (CLK_BA + 0x20)
-#define REG_CLKEN1 (CLK_BA + 0x24)
-#define REG_CLKDIV1 (CLK_BA + 0x28)
-
-/* Define PLL freq setting */
-#define PLL_DISABLE 0x12B63
-#define PLL_66MHZ 0x2B63
-#define PLL_100MHZ 0x4F64
-#define PLL_120MHZ 0x4F63
-#define PLL_166MHZ 0x4124
-#define PLL_200MHZ 0x4F24
-
-/* Define AHB:CPUFREQ ratio */
-#define AHB_CPUCLK_1_1 0x00
-#define AHB_CPUCLK_1_2 0x01
-#define AHB_CPUCLK_1_4 0x02
-#define AHB_CPUCLK_1_8 0x03
-
-/* Define APB:AHB ratio */
-#define APB_AHB_1_2 0x01
-#define APB_AHB_1_4 0x02
-#define APB_AHB_1_8 0x03
-
-/* Define clock skew */
-#define DEFAULTSKEW 0x48
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
deleted file mode 100644
index 3c72550..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_EBI_H
-#define __ASM_ARCH_REGS_EBI_H
-
-/* EBI Control Registers */
-
-#define EBI_BA NUC93X_VA_EBI
-#define REG_EBICON (EBI_BA + 0x00)
-#define REG_ROMCON (EBI_BA + 0x04)
-#define REG_SDCONF0 (EBI_BA + 0x08)
-#define REG_SDCONF1 (EBI_BA + 0x0C)
-#define REG_SDTIME0 (EBI_BA + 0x10)
-#define REG_SDTIME1 (EBI_BA + 0x14)
-#define REG_EXT0CON (EBI_BA + 0x18)
-#define REG_EXT1CON (EBI_BA + 0x1C)
-#define REG_EXT2CON (EBI_BA + 0x20)
-#define REG_EXT3CON (EBI_BA + 0x24)
-#define REG_EXT4CON (EBI_BA + 0x28)
-#define REG_CKSKEW (EBI_BA + 0x2C)
-
-#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-irq.h b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
deleted file mode 100644
index 2302159..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-irq.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-/* Advance Interrupt Controller (AIC) Registers */
-
-#define AIC_BA NUC93X_VA_IRQ
-
-#define REG_AIC_IRQSC (AIC_BA+0x80)
-#define REG_AIC_GEN (AIC_BA+0x84)
-#define REG_AIC_GASR (AIC_BA+0x88)
-#define REG_AIC_GSCR (AIC_BA+0x8C)
-#define REG_AIC_IRSR (AIC_BA+0x100)
-#define REG_AIC_IASR (AIC_BA+0x104)
-#define REG_AIC_ISR (AIC_BA+0x108)
-#define REG_AIC_IPER (AIC_BA+0x10C)
-#define REG_AIC_ISNR (AIC_BA+0x110)
-#define REG_AIC_IMR (AIC_BA+0x114)
-#define REG_AIC_OISR (AIC_BA+0x118)
-#define REG_AIC_MECR (AIC_BA+0x120)
-#define REG_AIC_MDCR (AIC_BA+0x124)
-#define REG_AIC_SSCR (AIC_BA+0x128)
-#define REG_AIC_SCCR (AIC_BA+0x12C)
-#define REG_AIC_EOSCR (AIC_BA+0x130)
-#define AIC_IPER (0x10C)
-#define AIC_ISNR (0x110)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-serial.h b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
deleted file mode 100644
index 767a047..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-serial.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-serial.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define UART0_BA NUC93X_VA_UART
-#define UART1_BA (NUC93X_VA_UART+0x100)
-
-#define UART0_PA NUC93X_PA_UART
-#define UART1_PA (NUC93X_PA_UART+0x100)
-
-
-#ifndef __ASSEMBLY__
-
-struct nuc93x_uart_clksrc {
- const char *name;
- unsigned int divisor;
- unsigned int min_baud;
- unsigned int max_baud;
-};
-
-struct nuc93x_uartcfg {
- unsigned char hwport;
- unsigned char unused;
- unsigned short flags;
- unsigned long uart_flags;
-
- unsigned long ucon;
- unsigned long ulcon;
- unsigned long ufcon;
-
- struct nuc93x_uart_clksrc *clocks;
- unsigned int clocks_size;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-timer.h b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
deleted file mode 100644
index 394be96..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-timer.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-timer.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-/* Timer Registers */
-
-#define TMR_BA NUC93X_VA_TIMER
-#define REG_TCSR0 (TMR_BA+0x00)
-#define REG_TICR0 (TMR_BA+0x08)
-#define REG_TDR0 (TMR_BA+0x10)
-#define REG_TISR (TMR_BA+0x18)
-#define REG_WTCR (TMR_BA+0x1C)
-
-#endif /* __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/system.h b/arch/arm/mach-nuc93x/include/mach/system.h
deleted file mode 100644
index d26bd9a..0000000
--- a/arch/arm/mach-nuc93x/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/machnuc93x/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <asm/proc-fns.h>
-
-static void arch_idle(void)
-{
-}
-
-static void arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
diff --git a/arch/arm/mach-nuc93x/include/mach/timex.h b/arch/arm/mach-nuc93x/include/mach/timex.h
deleted file mode 100644
index 0c719cc..0000000
--- a/arch/arm/mach-nuc93x/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/timex.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE Now, I don't use it. */
-
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h
deleted file mode 100644
index 381cb9b..0000000
--- a/arch/arm/mach-nuc93x/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/uncompress.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-/* Defines for UART registers */
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-#include <linux/serial_reg.h>
-
-#define arch_decomp_wdog()
-
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-static u32 * const uart_base = (u32 *)UART0_PA;
-
-static void putc(int ch)
-{
- /* Check THRE and TEMT bits before we transmit the character.
- */
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
-
- *uart_base = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif/* __ASM_NUC93X_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
deleted file mode 100644
index 7d11a5f..0000000
--- a/arch/arm/mach-nuc93x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/vmalloc.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xE0000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c
deleted file mode 100644
index aa279f2..0000000
--- a/arch/arm/mach-nuc93x/irq.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/irq.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
-static void nuc93x_irq_mask(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, REG_AIC_MDCR);
-}
-
-/*
- * By the w90p910 spec,any irq,only write 1
- * to REG_AIC_EOSCR for ACK
- */
-
-static void nuc93x_irq_ack(struct irq_data *d)
-{
- __raw_writel(0x01, REG_AIC_EOSCR);
-}
-
-static void nuc93x_irq_unmask(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, REG_AIC_MECR);
-
-}
-
-static struct irq_chip nuc93x_irq_chip = {
- .irq_ack = nuc93x_irq_ack,
- .irq_mask = nuc93x_irq_mask,
- .irq_unmask = nuc93x_irq_unmask,
-};
-
-void __init nuc93x_init_irq(void)
-{
- int irqno;
-
- __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
-
- for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
- irq_set_chip_and_handler(irqno, &nuc93x_irq_chip,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
deleted file mode 100644
index d702570..0000000
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-
-#include "nuc932.h"
-
-static void __init nuc932evb_map_io(void)
-{
- nuc932_map_io();
- nuc932_init_clocks();
- nuc932_init_uartclk();
-}
-
-static void __init nuc932evb_init(void)
-{
- nuc932_board_init();
-}
-
-MACHINE_START(NUC932EVB, "NUC932EVB")
- /* Maintainer: Wan ZongShun */
- .boot_params = 0,
- .map_io = nuc932evb_map_io,
- .init_irq = nuc93x_init_irq,
- .init_machine = nuc932evb_init,
- .timer = &nuc93x_timer,
-MACHINE_END
diff --git a/arch/arm/mach-nuc93x/nuc932.c b/arch/arm/mach-nuc93x/nuc932.c
deleted file mode 100644
index 3966ead..0000000
--- a/arch/arm/mach-nuc93x/nuc932.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/nuc932.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC932 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc932_dev[] __initdata = {
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc932evb_iodesc[] __initdata = {
-};
-
-/*Init NUC932 evb io*/
-
-void __init nuc932_map_io(void)
-{
- nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
-}
-
-/*Init NUC932 clock*/
-
-void __init nuc932_init_clocks(void)
-{
- nuc93x_init_clocks();
-}
-
-/*enable NUC932 uart clock*/
-
-void __init nuc932_init_uartclk(void)
-{
- struct clk *ck_uart = clk_get(NULL, "uart");
- BUG_ON(IS_ERR(ck_uart));
-
- clk_enable(ck_uart);
-}
-
-/*Init NUC932 board info*/
-
-void __init nuc932_board_init(void)
-{
- nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
-}
diff --git a/arch/arm/mach-nuc93x/nuc932.h b/arch/arm/mach-nuc93x/nuc932.h
deleted file mode 100644
index 9a66edd..0000000
--- a/arch/arm/mach-nuc93x/nuc932.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/nuc932.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC93x CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc93x_init_irq(void);
-extern struct sys_timer nuc93x_timer;
-
-/* extern file from nuc932.c */
-
-extern void nuc932_board_init(void);
-extern void nuc932_init_clocks(void);
-extern void nuc932_map_io(void);
-extern void nuc932_init_uartclk(void);
diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
deleted file mode 100644
index f9807c0..0000000
--- a/arch/arm/mach-nuc93x/time.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/time.c
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/system.h>
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#define RESETINT 0x01
-#define PERIOD (0x01 << 27)
-#define ONESHOT (0x00 << 27)
-#define COUNTEN (0x01 << 30)
-#define INTEN (0x01 << 29)
-
-#define TICKS_PER_SEC 100
-#define PRESCALE 0x63 /* Divider = prescale + 1 */
-
-unsigned int timer0_load;
-
-static unsigned long nuc93x_gettimeoffset(void)
-{
- return 0;
-}
-
-/*IRQ handler for the timer*/
-
-static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- __raw_writel(0x01, REG_TISR); /* clear TIF0 */
- return IRQ_HANDLED;
-}
-
-static struct irqaction nuc93x_timer_irq = {
- .name = "nuc93x Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = nuc93x_timer_interrupt,
-};
-
-/*Set up timer reg.*/
-
-static void nuc93x_timer_setup(void)
-{
- struct clk *ck_ext = clk_get(NULL, "ext");
- struct clk *ck_timer = clk_get(NULL, "timer");
- unsigned int rate, val = 0;
-
- BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
-
- clk_enable(ck_timer);
- rate = clk_get_rate(ck_ext);
- clk_put(ck_ext);
- rate = rate / (PRESCALE + 0x01);
-
- /* set a known state */
- __raw_writel(0x00, REG_TCSR0);
- __raw_writel(RESETINT, REG_TISR);
-
- timer0_load = (rate / TICKS_PER_SEC);
- __raw_writel(timer0_load, REG_TICR0);
-
- val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
- __raw_writel(val, REG_TCSR0);
-
-}
-
-static void __init nuc93x_timer_init(void)
-{
- nuc93x_timer_setup();
- setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
-}
-
-struct sys_timer nuc93x_timer = {
- .init = nuc93x_timer_init,
- .offset = nuc93x_gettimeoffset,
- .resume = nuc93x_timer_setup
-};
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 5b114d1..11c85cd2 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 312ea6b..1f1db76 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -30,7 +30,6 @@
#include <plat/io.h>
#include <plat/board-ams-delta.h>
-#include <mach/gpio.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
@@ -135,12 +134,6 @@
*(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
}
-static void __init ams_delta_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
@@ -379,17 +372,13 @@
}
arch_initcall(ams_delta_modem_init);
-static void __init ams_delta_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
- .boot_params = 0x10000100,
- .map_io = ams_delta_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = ams_delta_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a6b1bea..2317827 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
@@ -297,63 +296,6 @@
static void __init omap_fsample_init(void)
{
- fsample_init_smc91x();
-
- if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
- BUG();
- gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
-
- omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
- omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
- /* Mux pins for keypad */
- omap_cfg_reg(E2_7XX_KBR0);
- omap_cfg_reg(J7_7XX_KBR1);
- omap_cfg_reg(E1_7XX_KBR2);
- omap_cfg_reg(F3_7XX_KBR3);
- omap_cfg_reg(D2_7XX_KBR4);
- omap_cfg_reg(C2_7XX_KBC0);
- omap_cfg_reg(D3_7XX_KBC1);
- omap_cfg_reg(E4_7XX_KBC2);
- omap_cfg_reg(F4_7XX_KBC3);
- omap_cfg_reg(E3_7XX_KBC4);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- omap_board_config = fsample_config;
- omap_board_config_size = ARRAY_SIZE(fsample_config);
- omap_serial_init();
- omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-static void __init omap_fsample_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
- {
- .virtual = H2P2_DBG_FPGA_BASE,
- .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
- .length = H2P2_DBG_FPGA_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = FSAMPLE_CPLD_BASE,
- .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
- .length = FSAMPLE_CPLD_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init omap_fsample_map_io(void)
-{
- omap1_map_common_io();
- iotable_init(omap_fsample_io_desc,
- ARRAY_SIZE(omap_fsample_io_desc));
-
/* Early, board-dependent init */
/*
@@ -384,15 +326,68 @@
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
- omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+ OMAP7XX_IO_CONF_9);
+
+ fsample_init_smc91x();
+
+ if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+ BUG();
+ gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
+
+ omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+ omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+ /* Mux pins for keypad */
+ omap_cfg_reg(E2_7XX_KBR0);
+ omap_cfg_reg(J7_7XX_KBR1);
+ omap_cfg_reg(E1_7XX_KBR2);
+ omap_cfg_reg(F3_7XX_KBR3);
+ omap_cfg_reg(D2_7XX_KBR4);
+ omap_cfg_reg(C2_7XX_KBC0);
+ omap_cfg_reg(D3_7XX_KBC1);
+ omap_cfg_reg(E4_7XX_KBC2);
+ omap_cfg_reg(F4_7XX_KBC3);
+ omap_cfg_reg(E3_7XX_KBC4);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ omap_board_config = fsample_config;
+ omap_board_config_size = ARRAY_SIZE(fsample_config);
+ omap_serial_init();
+ omap_register_i2c_bus(1, 100, NULL, 0);
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_fsample_io_desc[] __initdata = {
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = FSAMPLE_CPLD_BASE,
+ .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
+ .length = FSAMPLE_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init omap_fsample_map_io(void)
+{
+ omap15xx_map_io();
+ iotable_init(omap_fsample_io_desc,
+ ARRAY_SIZE(omap_fsample_io_desc));
}
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_fsample_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_fsample_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 04fc356..dc5b75d 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -22,18 +22,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
-static void __init omap_generic_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
/* assume no Mini-AB port */
#ifdef CONFIG_ARCH_OMAP15XX
@@ -87,17 +80,13 @@
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_generic_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
/* Maintainer: Tony Lindgren <tony@atomide.com> */
- .boot_params = 0x10000100,
- .map_io = omap_generic_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_generic_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index f2fc43d..da0e37d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -11,13 +11,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7fb1a..b334b14 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -18,7 +18,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
@@ -32,7 +32,6 @@
#include <linux/smc91x.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -373,12 +372,6 @@
},
};
-static void __init h2_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
@@ -454,17 +447,13 @@
h2_mmc_init();
}
-static void __init h2_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
- .boot_params = 0x10000100,
- .map_io = h2_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = h2_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = h2_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 2098525..f8242aa 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -11,13 +11,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 31f3487..74ebe72 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -13,7 +13,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/major.h>
@@ -34,7 +34,6 @@
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -436,23 +435,13 @@
h3_mmc_init();
}
-static void __init h3_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-static void __init h3_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
- .boot_params = 0x10000100,
- .map_io = h3_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = h3_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = h3_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 36e06ea..3e91baa 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -23,7 +23,6 @@
* 02110-1301, USA.
*
*/
-
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -500,7 +499,7 @@
static void __init htcherald_map_io(void)
{
- omap1_map_common_io();
+ omap7xx_map_io();
/*
* The LCD panel must be disabled and DMA turned off here, as doing
@@ -601,20 +600,14 @@
#endif
}
-static void __init htcherald_init_irq(void)
-{
- printk(KERN_INFO "htcherald_init_irq.\n");
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
MACHINE_START(HERALD, "HTC Herald")
/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
/* Maintainer: wing-linux.sourceforge.net */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = htcherald_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = htcherald_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 0b1ba46..273153d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -15,7 +15,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
@@ -289,12 +288,6 @@
}
}
-static void __init innovator_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_usb_config innovator1510_usb_config __initdata = {
/* for bundled non-standard host and peripheral cables */
@@ -439,30 +432,32 @@
innovator_mmc_init();
}
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
static void __init innovator_map_io(void)
{
- omap1_map_common_io();
+ omap15xx_map_io();
-#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap1510()) {
- iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
- udelay(10); /* Delay needed for FPGA */
+ iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+ udelay(10); /* Delay needed for FPGA */
- /* Dump the Innovator FPGA rev early - useful info for support. */
- printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510_FPGA_REV_HIGH),
- fpga_read(OMAP1510_FPGA_REV_LOW),
- fpga_read(OMAP1510_FPGA_BOARD_REV));
- }
-#endif
+ /* Dump the Innovator FPGA rev early - useful info for support. */
+ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
+ fpga_read(OMAP1510_FPGA_REV_HIGH),
+ fpga_read(OMAP1510_FPGA_REV_LOW),
+ fpga_read(OMAP1510_FPGA_BOARD_REV));
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = innovator_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = innovator_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = innovator_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 5469ce2..6798b84 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mutex.h>
@@ -26,7 +26,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
@@ -39,21 +38,6 @@
#define ADS7846_PENDOWN_GPIO 15
-static void __init omap_nokia770_init_irq(void)
-{
- /* On Nokia 770, the SleepX signal is masked with an
- * MPUIO line by default. It has to be unmasked for it
- * to become functional */
-
- /* SleepX mask direction */
- omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
- /* Unmask SleepX signal */
- omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
-
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int nokia770_keymap[] = {
KEY(1, 0, GROUP_0 | KEY_UP),
KEY(2, 0, GROUP_1 | KEY_F5),
@@ -246,6 +230,15 @@
static void __init omap_nokia770_init(void)
{
+ /* On Nokia 770, the SleepX signal is masked with an
+ * MPUIO line by default. It has to be unmasked for it
+ * to become functional */
+
+ /* SleepX mask direction */
+ omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+ /* Unmask SleepX signal */
+ omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
@@ -258,16 +251,12 @@
nokia770_mmc_init();
}
-static void __init omap_nokia770_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(NOKIA770, "Nokia 770")
- .boot_params = 0x10000100,
- .map_io = omap_nokia770_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_nokia770_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b08a213..c385927 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -25,7 +25,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -42,7 +42,6 @@
#include <linux/i2c/tps65010.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -279,12 +278,6 @@
irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
}
-static void __init osk_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config osk_usb_config __initdata = {
/* has usb host connector (A) ... for development it can also
* be used, with a NONSTANDARD gender-bending cable/dongle, as
@@ -576,17 +569,13 @@
osk_mistral_init();
}
-static void __init osk_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_OSK, "TI-OSK")
/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
- .boot_params = 0x10000100,
- .map_io = osk_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = osk_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = osk_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 459cb6b..f9c44cb 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -16,7 +16,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -33,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
@@ -59,12 +58,6 @@
#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
-static void __init omap_palmte_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int palmte_keymap[] = {
KEY(0, 0, KEY_F1), /* Calendar */
KEY(1, 0, KEY_F2), /* Contacts */
@@ -269,16 +262,12 @@
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_palmte_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
- .boot_params = 0x10000100,
- .map_io = omap_palmte_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmte_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index b214f45..11a9853 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -12,6 +12,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -30,7 +31,6 @@
#include <asm/mach/map.h>
#include <plat/led.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
@@ -263,12 +263,6 @@
}
};
-static void __init omap_palmtt_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config palmtt_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0,
@@ -315,16 +309,12 @@
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_palmtt_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
- .boot_params = 0x10000100,
- .map_io = omap_palmtt_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmtt_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9b0ea48..c6fe61d 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -15,6 +15,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -32,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
@@ -57,13 +57,6 @@
#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
-static void __init
-omap_palmz71_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int palmz71_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(1, 0, KEY_F2),
@@ -334,17 +327,12 @@
palmz71_gpio_setup(0);
}
-static void __init
-omap_palmz71_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
- .boot_params = 0x10000100,
- .map_io = omap_palmz71_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmz71_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 67acd41..203ae07 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/flash.h>
@@ -265,56 +264,6 @@
static void __init omap_perseus2_init(void)
{
- perseus2_init_smc91x();
-
- if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
- BUG();
- gpio_direction_input(P2_NAND_RB_GPIO_PIN);
-
- omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
- omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
- /* Mux pins for keypad */
- omap_cfg_reg(E2_7XX_KBR0);
- omap_cfg_reg(J7_7XX_KBR1);
- omap_cfg_reg(E1_7XX_KBR2);
- omap_cfg_reg(F3_7XX_KBR3);
- omap_cfg_reg(D2_7XX_KBR4);
- omap_cfg_reg(C2_7XX_KBC0);
- omap_cfg_reg(D3_7XX_KBC1);
- omap_cfg_reg(E4_7XX_KBC2);
- omap_cfg_reg(F4_7XX_KBC3);
- omap_cfg_reg(E3_7XX_KBC4);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- omap_board_config = perseus2_config;
- omap_board_config_size = ARRAY_SIZE(perseus2_config);
- omap_serial_init();
- omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-static void __init omap_perseus2_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_perseus2_io_desc[] __initdata = {
- {
- .virtual = H2P2_DBG_FPGA_BASE,
- .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
- .length = H2P2_DBG_FPGA_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init omap_perseus2_map_io(void)
-{
- omap1_map_common_io();
- iotable_init(omap_perseus2_io_desc,
- ARRAY_SIZE(omap_perseus2_io_desc));
-
/* Early, board-dependent init */
/*
@@ -345,15 +294,62 @@
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
- omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+ OMAP7XX_IO_CONF_9);
+
+ perseus2_init_smc91x();
+
+ if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+ BUG();
+ gpio_direction_input(P2_NAND_RB_GPIO_PIN);
+
+ omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+ omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+ /* Mux pins for keypad */
+ omap_cfg_reg(E2_7XX_KBR0);
+ omap_cfg_reg(J7_7XX_KBR1);
+ omap_cfg_reg(E1_7XX_KBR2);
+ omap_cfg_reg(F3_7XX_KBR3);
+ omap_cfg_reg(D2_7XX_KBR4);
+ omap_cfg_reg(C2_7XX_KBC0);
+ omap_cfg_reg(D3_7XX_KBC1);
+ omap_cfg_reg(E4_7XX_KBC2);
+ omap_cfg_reg(F4_7XX_KBC3);
+ omap_cfg_reg(E3_7XX_KBC4);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ omap_board_config = perseus2_config;
+ omap_board_config_size = ARRAY_SIZE(perseus2_config);
+ omap_serial_init();
+ omap_register_i2c_bus(1, 100, NULL, 0);
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_perseus2_io_desc[] __initdata = {
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init omap_perseus2_map_io(void)
+{
+ omap7xx_map_io();
+ iotable_init(omap_perseus2_io_desc,
+ ARRAY_SIZE(omap_perseus2_io_desc));
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_perseus2_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index e8ddd86..b59f78850 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,11 +12,11 @@
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 9c3b7c5..667a7cb 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -14,7 +14,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/dma.h>
@@ -407,24 +406,13 @@
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
}
-/*----------------------------------------*/
-static void __init omap_sx1_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-/*----------------------------------------*/
-
-static void __init omap_sx1_map_io(void)
-{
- omap1_map_common_io();
-}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
- .boot_params = 0x10000100,
- .map_io = omap_sx1_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_sx1_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 036edc0e..2a6545b 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -13,6 +13,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -33,7 +34,6 @@
#include <plat/board-voiceblue.h>
#include <plat/common.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
@@ -159,17 +159,6 @@
static struct omap_board_config_kernel voiceblue_config[] = {
};
-static void __init voiceblue_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-static void __init voiceblue_map_io(void)
-{
- omap1_map_common_io();
-}
-
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
@@ -301,10 +290,11 @@
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
- .boot_params = 0x10000100,
- .map_io = voiceblue_map_io,
+ .atag_offset = 0x100,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = voiceblue_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 36f26c3..48ef988 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -10,6 +10,7 @@
*/
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -21,10 +22,10 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include <plat/common.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
@@ -291,6 +292,8 @@
if (!cpu_class_is_omap1())
return -ENODEV;
+ omap_sram_init();
+
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index cddbf8b..0a17a1a 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -17,6 +17,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -28,7 +29,6 @@
#include <asm/mach/irq.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
static void fpga_mask_irq(struct irq_data *d)
{
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 6285604..2b36a28 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,13 +13,8 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <plat/serial.h>
-#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
omap_uart_phys: .word 0x0
omap_uart_virt: .word 0x0
@@ -31,26 +26,24 @@
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */
-9: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rp, =omap_uart_phys @ MMU enabled
- add \rv, \rp, #4 @ omap_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+9: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ omap_uart_phys
+ ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
- ldr \rp, [\rp, #0]
+ and \rp, pc, #0xff000000
+ ldr \rv, =OMAP_UART_INFO_OFS
+ ldr \rp, [\rp, \rv]
/* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rp, #0 @ no port configured?
@@ -74,17 +67,18 @@
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0xff000000 @ phys base
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0xff000000 @ phys base
add \rp, \rp, #0xfe000000 @ virt base
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
b 9b
-99:
+
+ .align
+99: .word .
+ .word omap_uart_phys
+ .ltorg
+
+100:
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index e9b600c..c633764 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -2,4 +2,55 @@
* arch/arm/mach-omap1/include/mach/memory.h
*/
-#include <plat/memory.h>
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET UL(0x10000000)
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET UL(0x30000000)
+
+#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_pfn_to_dma(dev, pfn) \
+ ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
+ if (is_lbus_device(dev)) \
+ __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+ __dma; })
+
+#define __arch_dma_to_pfn(dev, addr) \
+ ({ dma_addr_t __dma = addr; \
+ if (is_lbus_device(dev)) \
+ __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
+ __phys_to_pfn(__dma); \
+ })
+
+#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
+ lbus_to_virt(addr) : \
+ __phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
+ (dma_addr_t) (is_lbus_device(dev) ? \
+ virt_to_lbus(__addr) : \
+ __virt_to_phys(__addr)); })
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 870886a..7969cfd 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -21,7 +21,6 @@
#include "clock.h"
extern void omap_check_revision(void);
-extern void omap_sram_init(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -85,50 +84,45 @@
#endif
/*
- * Maps common IO regions for omap1. This should only get called from
- * board specific init.
+ * Maps common IO regions for omap1
*/
-void __init omap1_map_common_io(void)
+static void __init omap1_map_common_io(void)
{
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
- * IO space mapping must be initialized before we can do that.
- */
- omap_check_revision();
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
- if (cpu_is_omap7xx()) {
- iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap15xx()) {
- iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
- if (cpu_is_omap16xx()) {
- iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
- }
-#endif
-
- omap_sram_init();
}
-/*
- * Common low-level hardware init for omap1. This should only get called from
- * board specific init.
- */
-void __init omap1_init_common_hw(void)
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+void __init omap7xx_map_io(void)
{
+ omap1_map_common_io();
+ iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void __init omap15xx_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+void __init omap16xx_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
+}
+#endif
+
+/*
+ * Common low-level hardware init for omap1.
+ */
+void omap1_init_early(void)
+{
+ omap_check_revision();
+ omap_ioremap_init();
+
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
@@ -138,8 +132,8 @@
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
-
omap1_mux_init();
+ omap_init_consistent_dma_size();
}
/*
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index e2b9c90..e5b104b 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -35,7 +35,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -45,7 +45,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
#include <plat/cpu.h>
#define IRQ_BANK(irq) ((irq) >> 5)
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index b4f9be5..4b818eb 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -9,6 +9,7 @@
* The "surfer" expansion board and H2 sample board also have two-color
* green+red LEDs (in parallel), used here for timer and idle indicators.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
@@ -20,7 +21,6 @@
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 499d7ad..da09f43 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -3,14 +3,13 @@
*
* LED driver for OSK with optional Mistral QVGA board
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/gpio.h>
-
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 22eb11d..ae6dd93b 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -3,13 +3,13 @@
*
* OMAP LEDs dispatcher
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index ab7395d..91f9abb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -31,6 +31,7 @@
static int dsp_use;
static struct clk *api_clk;
static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
static void omap1_mcbsp_request(unsigned int id)
{
@@ -78,6 +79,17 @@
.free = omap1_mcbsp_free,
};
+#define OMAP7XX_MCBSP1_BASE 0xfffb1000
+#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE 0xe1011800
+#define OMAP1510_MCBSP2_BASE 0xfffb1000
+#define OMAP1510_MCBSP3_BASE 0xe1017000
+
+#define OMAP1610_MCBSP1_BASE 0xe1011800
+#define OMAP1610_MCBSP2_BASE 0xfffb1000
+#define OMAP1610_MCBSP3_BASE 0xe1017000
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
struct resource omap7xx_mcbsp_res[][6] = {
{
@@ -369,6 +381,39 @@
#define OMAP16XX_MCBSP_COUNT 0
#endif
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
+{
+ int i;
+
+ omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+ GFP_KERNEL);
+ if (!omap_mcbsp_devices) {
+ printk(KERN_ERR "Could not register McBSP devices\n");
+ return;
+ }
+
+ for (i = 0; i < size; i++) {
+ struct platform_device *new_mcbsp;
+ int ret;
+
+ new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+ if (!new_mcbsp)
+ continue;
+ platform_device_add_resources(new_mcbsp, &res[i * res_count],
+ res_count);
+ config[i].reg_size = 2;
+ config[i].reg_step = 2;
+ new_mcbsp->dev.platform_data = &config[i];
+ ret = platform_device_add(new_mcbsp);
+ if (ret) {
+ platform_device_put(new_mcbsp);
+ continue;
+ }
+ omap_mcbsp_devices[i] = new_mcbsp;
+ }
+}
+
static int __init omap1_mcbsp_init(void)
{
if (!cpu_class_is_omap1())
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 550ca9d..93ae8f2 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +24,6 @@
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/fpga.h>
#include "pm.h"
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
new file mode 100644
index 0000000..6e90665
--- /dev/null
+++ b/arch/arm/mach-omap1/timer.c
@@ -0,0 +1,173 @@
+/**
+ * OMAP1 Dual-Mode Timers - platform device registration
+ *
+ * Contains first level initialization routines which internally
+ * generates timer device information and registers with linux
+ * device model. It also has low level function to chnage the timer
+ * input clock source.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+
+#include <plat/dmtimer.h>
+
+#define OMAP1610_GPTIMER1_BASE 0xfffb1400
+#define OMAP1610_GPTIMER2_BASE 0xfffb1c00
+#define OMAP1610_GPTIMER3_BASE 0xfffb2400
+#define OMAP1610_GPTIMER4_BASE 0xfffb2c00
+#define OMAP1610_GPTIMER5_BASE 0xfffb3400
+#define OMAP1610_GPTIMER6_BASE 0xfffb3c00
+#define OMAP1610_GPTIMER7_BASE 0xfffb7400
+#define OMAP1610_GPTIMER8_BASE 0xfffbd400
+
+#define OMAP1_DM_TIMER_COUNT 8
+
+static int omap1_dm_timer_set_src(struct platform_device *pdev,
+ int source)
+{
+ int n = (pdev->id - 1) << 1;
+ u32 l;
+
+ l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+ l |= source << n;
+ __raw_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
+}
+
+
+int __init omap1_dm_timer_init(void)
+{
+ int i;
+ int ret;
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+
+ if (!cpu_is_omap16xx())
+ return 0;
+
+ for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
+ struct resource res[2];
+ u32 base, irq;
+
+ switch (i) {
+ case 1:
+ base = OMAP1610_GPTIMER1_BASE;
+ irq = INT_1610_GPTIMER1;
+ break;
+ case 2:
+ base = OMAP1610_GPTIMER2_BASE;
+ irq = INT_1610_GPTIMER2;
+ break;
+ case 3:
+ base = OMAP1610_GPTIMER3_BASE;
+ irq = INT_1610_GPTIMER3;
+ break;
+ case 4:
+ base = OMAP1610_GPTIMER4_BASE;
+ irq = INT_1610_GPTIMER4;
+ break;
+ case 5:
+ base = OMAP1610_GPTIMER5_BASE;
+ irq = INT_1610_GPTIMER5;
+ break;
+ case 6:
+ base = OMAP1610_GPTIMER6_BASE;
+ irq = INT_1610_GPTIMER6;
+ break;
+ case 7:
+ base = OMAP1610_GPTIMER7_BASE;
+ irq = INT_1610_GPTIMER7;
+ break;
+ case 8:
+ base = OMAP1610_GPTIMER8_BASE;
+ irq = INT_1610_GPTIMER8;
+ break;
+ default:
+ /*
+ * not supposed to reach here.
+ * this is to remove warning.
+ */
+ return -EINVAL;
+ }
+
+ pdev = platform_device_alloc("omap_timer", i);
+ if (!pdev) {
+ pr_err("%s: Failed to device alloc for dmtimer%d\n",
+ __func__, i);
+ return -ENOMEM;
+ }
+
+ memset(res, 0, 2 * sizeof(struct resource));
+ res[0].start = base;
+ res[0].end = base + 0x46;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = irq;
+ res[1].end = irq;
+ res[1].flags = IORESOURCE_IRQ;
+ ret = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add resources.\n",
+ __func__);
+ goto err_free_pdev;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_pdata;
+ }
+
+ pdata->set_timer_src = omap1_dm_timer_set_src;
+ pdata->needs_manual_reset = 1;
+
+ ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ dev_dbg(&pdev->dev, " Registered.\n");
+ }
+
+ return 0;
+
+err_free_pdata:
+ kfree(pdata);
+
+err_free_pdev:
+ platform_device_unregister(pdev);
+
+ return ret;
+}
+arch_initcall(omap1_dm_timer_init);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 89bfb49..5034147 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -14,7 +14,6 @@
select SERIAL_OMAP_CONSOLE
select I2C
select I2C_OMAP
- select MFD_SUPPORT
select MENELAUS if ARCH_OMAP2
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
@@ -108,9 +107,13 @@
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
- bool "Generic OMAP board"
- depends on ARCH_OMAP2
+ bool "Generic OMAP2+ board"
+ depends on ARCH_OMAP2PLUS
+ select USE_OF
default y
+ help
+ Support for generic TI OMAP2+ boards using Flattened Device Tree.
+ More information at Documentation/devicetree
config MACH_OMAP2_TUSB6010
bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 7317a2b..69ab1c0 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -89,14 +89,13 @@
vp44xx_data.o
# OMAP voltage domains
-ifeq ($(CONFIG_PM),y)
-voltagedomain-common := voltage.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
+voltagedomain-common := voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
+ voltagedomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
voltagedomains44xx_data.o
-endif
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
@@ -116,9 +115,12 @@
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
clockdomain2xxx_3xxx.o \
clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
+obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomain2xxx_3xxx.o \
- clockdomains2xxx_3xxx_data.o
+ clockdomains2xxx_3xxx_data.o \
+ clockdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomain44xx.o \
clockdomains44xx_data.o
@@ -185,75 +187,62 @@
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
- hsmmc.o
+obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
- hsmmc.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OVERO) += board-overo.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
- hsmmc.o \
- board-flash.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
+obj-$(CONFIG_MACH_OVERO) += board-overo.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
+obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
- sdram-nokia.o \
- hsmmc.o
+ sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
sdram-nokia.o \
board-rx51-peripherals.o \
- board-rx51-video.o \
- hsmmc.o
+ board-rx51-video.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
- board-zoom-display.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
- hsmmc.o
+ board-zoom-display.o
+obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
- hsmmc.o
+obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
+obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
+
+obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
-obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
- hsmmc.o
+obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+
# Platform specific device init code
+
+omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
+omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
+obj-y += $(omap-flash-y) $(omap-flash-m)
+
+omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
+obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
+
+
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
obj-y += $(usbfs-m) $(usbfs-y)
obj-y += usb-musb.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index f79b7d2..d704f0a 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -39,6 +39,9 @@
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
#include "mux.h"
#include "hsmmc.h"
#include "common-board-devices.h"
@@ -99,20 +102,72 @@
.resource = &sdp2430_flash_resource,
};
-static struct platform_device sdp2430_lcd_device = {
- .name = "sdp2430_lcd",
- .id = -1,
-};
-
static struct platform_device *sdp2430_devices[] __initdata = {
&sdp2430_flash_device,
+};
+
+/* LCD */
+#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
+#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
+
+static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
+ gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
+
+ return 0;
+}
+
+static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
+ gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
+}
+
+static struct panel_generic_dpi_data sdp2430_panel_data = {
+ .name = "nec_nl2432dr22-11b",
+ .platform_enable = sdp2430_panel_enable_lcd,
+ .platform_disable = sdp2430_panel_disable_lcd,
+};
+
+static struct omap_dss_device sdp2430_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 16,
+ .data = &sdp2430_panel_data,
+};
+
+static struct omap_dss_device *sdp2430_dss_devices[] = {
&sdp2430_lcd_device,
};
-static struct omap_lcd_config sdp2430_lcd_config __initdata = {
- .ctrl_name = "internal",
+static struct omap_dss_board_info sdp2430_dss_data = {
+ .num_devices = ARRAY_SIZE(sdp2430_dss_devices),
+ .devices = sdp2430_dss_devices,
+ .default_device = &sdp2430_lcd_device,
};
+static void __init sdp2430_display_init(void)
+{
+ int r;
+
+ static struct gpio gpios[] __initdata = {
+ { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
+ "LCD reset" },
+ { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
+ "LCD Backlight" },
+ };
+
+ r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+ if (r) {
+ pr_err("Cannot request LCD GPIOs, error %d\n", r);
+ return;
+ }
+
+ omap_display_init(&sdp2430_dss_data);
+}
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
static struct omap_smc91x_platform_data board_smc91x_data = {
@@ -137,16 +192,6 @@
#endif
-static struct omap_board_config_kernel sdp2430_config[] __initdata = {
- {OMAP_TAG_LCD, &sdp2430_lcd_config},
-};
-
-static void __init omap_2430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -229,13 +274,11 @@
{
omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
- omap_board_config = sdp2430_config;
- omap_board_config_size = ARRAY_SIZE(sdp2430_config);
-
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap2_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
@@ -247,20 +290,16 @@
/* Turn off secondary LCD backlight */
gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
"Secondary LCD backlight");
-}
-static void __init omap_2430sdp_map_io(void)
-{
- omap2_set_globals_243x();
- omap243x_map_common_io();
+ sdp2430_display_init();
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_2430sdp_map_io,
- .init_early = omap_2430sdp_init_early,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd600cf..77142c1 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -37,7 +37,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/gpmc-smc91x.h>
@@ -186,8 +186,7 @@
.platform_disable = sdp3430_panel_disable_lcd,
};
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
};
@@ -195,7 +194,7 @@
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -225,12 +224,6 @@
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
};
-static void __init omap_3430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-}
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -719,6 +712,7 @@
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
+ omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
@@ -729,10 +723,10 @@
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_3430sdp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index e4f37b5..f552305 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -70,13 +70,6 @@
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
-static void __init omap_sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -207,6 +200,8 @@
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
zoom_display_init();
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
@@ -215,10 +210,10 @@
}
MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_sdp_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index c7cef44..5156468 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -38,6 +38,8 @@
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
+#include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-picodlp.h>
#include <linux/wl12xx.h>
#include "mux.h"
@@ -52,6 +54,8 @@
#define OMAP4_SFH7741_ENABLE_GPIO 188
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
+#define DLP_POWER_ON_GPIO 40
#define GPIO_WIFI_PMENA 54
#define GPIO_WIFI_IRQ 53
@@ -129,7 +133,7 @@
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
-static struct omap_device_pad keypad_pads[] __initdata = {
+static struct omap_device_pad keypad_pads[] = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
@@ -340,11 +344,6 @@
return status;
}
-static struct platform_device sdp4430_lcd_device = {
- .name = "sdp4430_lcd",
- .id = -1,
-};
-
static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
@@ -374,27 +373,12 @@
};
static struct platform_device *sdp4430_devices[] __initdata = {
- &sdp4430_lcd_device,
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
&sdp4430_vbat,
};
-static struct omap_lcd_config sdp4430_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
-static struct omap_board_config_kernel sdp4430_config[] __initdata = {
- { OMAP_TAG_LCD, &sdp4430_lcd_config },
-};
-
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
@@ -648,37 +632,202 @@
gpio_free(HDMI_GPIO_HPD);
}
+static struct nokia_dsi_panel_data dsi1_panel = {
+ .name = "taal",
+ .reset_gpio = 102,
+ .use_ext_te = false,
+ .ext_te_gpio = 101,
+ .esd_interval = 0,
+};
+
+static struct omap_dss_device sdp4430_lcd_device = {
+ .name = "lcd",
+ .driver_name = "taal",
+ .type = OMAP_DISPLAY_TYPE_DSI,
+ .data = &dsi1_panel,
+ .phy.dsi = {
+ .clk_lane = 1,
+ .clk_pol = 0,
+ .data1_lane = 2,
+ .data1_pol = 0,
+ .data2_lane = 3,
+ .data2_pol = 0,
+
+ .module = 0,
+ },
+
+ .clocks = {
+ .dispc = {
+ .channel = {
+ /* Logic Clock = 172.8 MHz */
+ .lck_div = 1,
+ /* Pixel Clock = 34.56 MHz */
+ .pck_div = 5,
+ .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
+ },
+ .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
+ },
+
+ .dsi = {
+ .regn = 16, /* Fint = 2.4 MHz */
+ .regm = 180, /* DDR Clock = 216 MHz */
+ .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
+ .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
+
+ .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
+ .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
+ },
+ },
+ .channel = OMAP_DSS_CHANNEL_LCD,
+};
+
+static struct nokia_dsi_panel_data dsi2_panel = {
+ .name = "taal",
+ .reset_gpio = 104,
+ .use_ext_te = false,
+ .ext_te_gpio = 103,
+ .esd_interval = 0,
+};
+
+static struct omap_dss_device sdp4430_lcd2_device = {
+ .name = "lcd2",
+ .driver_name = "taal",
+ .type = OMAP_DISPLAY_TYPE_DSI,
+ .data = &dsi2_panel,
+ .phy.dsi = {
+ .clk_lane = 1,
+ .clk_pol = 0,
+ .data1_lane = 2,
+ .data1_pol = 0,
+ .data2_lane = 3,
+ .data2_pol = 0,
+
+ .module = 1,
+ },
+
+ .clocks = {
+ .dispc = {
+ .channel = {
+ /* Logic Clock = 172.8 MHz */
+ .lck_div = 1,
+ /* Pixel Clock = 34.56 MHz */
+ .pck_div = 5,
+ .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
+ },
+ .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
+ },
+
+ .dsi = {
+ .regn = 16, /* Fint = 2.4 MHz */
+ .regm = 180, /* DDR Clock = 216 MHz */
+ .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
+ .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
+
+ .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
+ .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
+ },
+ },
+ .channel = OMAP_DSS_CHANNEL_LCD2,
+};
+
+static void sdp4430_lcd_init(void)
+{
+ int r;
+
+ r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
+ "lcd1_reset_gpio");
+ if (r)
+ pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
+
+ r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
+ "lcd2_reset_gpio");
+ if (r)
+ pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
+}
+
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
- .clocks = {
- .dispc = {
- .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
- },
- .hdmi = {
- .regn = 15,
- .regm2 = 1,
- },
- },
.platform_enable = sdp4430_panel_enable_hdmi,
.platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
};
+static struct picodlp_panel_data sdp4430_picodlp_pdata = {
+ .picodlp_adapter_id = 2,
+ .emu_done_gpio = 44,
+ .pwrgood_gpio = 45,
+};
+
+static void sdp4430_picodlp_init(void)
+{
+ int r;
+ const struct gpio picodlp_gpios[] = {
+ {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+ "DLP POWER ON"},
+ {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
+ "DLP EMU DONE"},
+ {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
+ "DLP PWRGOOD"},
+ };
+
+ r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
+ if (r)
+ pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
+}
+
+static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(DISPLAY_SEL_GPIO, 0);
+ gpio_set_value(DLP_POWER_ON_GPIO, 1);
+
+ return 0;
+}
+
+static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(DLP_POWER_ON_GPIO, 0);
+ gpio_set_value(DISPLAY_SEL_GPIO, 1);
+}
+
+static struct omap_dss_device sdp4430_picodlp_device = {
+ .name = "picodlp",
+ .driver_name = "picodlp_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .channel = OMAP_DSS_CHANNEL_LCD2,
+ .platform_enable = sdp4430_panel_enable_picodlp,
+ .platform_disable = sdp4430_panel_disable_picodlp,
+ .data = &sdp4430_picodlp_pdata,
+};
+
static struct omap_dss_device *sdp4430_dss_devices[] = {
+ &sdp4430_lcd_device,
+ &sdp4430_lcd2_device,
&sdp4430_hdmi_device,
+ &sdp4430_picodlp_device,
};
static struct omap_dss_board_info sdp4430_dss_data = {
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
.devices = sdp4430_dss_devices,
- .default_device = &sdp4430_hdmi_device,
+ .default_device = &sdp4430_lcd_device,
};
-void omap_4430sdp_display_init(void)
+static void omap_4430sdp_display_init(void)
{
+ int r;
+
+ /* Enable LCD2 by default (instead of Pico DLP) */
+ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+ "display_sel");
+ if (r)
+ pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+ sdp4430_lcd_init();
sdp4430_hdmi_mux_init();
+ sdp4430_picodlp_init();
omap_display_init(&sdp4430_dss_data);
}
@@ -802,13 +951,11 @@
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
- omap_board_config = sdp4430_config;
- omap_board_config_size = ARRAY_SIZE(sdp4430_config);
-
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
@@ -830,18 +977,12 @@
omap_4430sdp_display_init();
}
-static void __init omap_4430sdp_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_4430sdp_map_io,
- .init_early = omap_4430sdp_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 933e935..7834536 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,12 +47,6 @@
};
#endif
-static void __init am3517_crane_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -70,6 +64,7 @@
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = am3517_crane_config;
omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
@@ -98,10 +93,10 @@
}
MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_crane_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f3006c3..d314f03 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -36,6 +36,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "mux.h"
#include "control.h"
@@ -333,8 +334,7 @@
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
@@ -342,7 +342,7 @@
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -362,11 +362,6 @@
/*
* Board initialization
*/
-static void __init am3517_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
@@ -469,6 +464,7 @@
am3517_evm_i2c_init();
omap_display_init(&am3517_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
@@ -490,10 +486,10 @@
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_evm_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7021170..de8134b7 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -40,6 +40,9 @@
#include <plat/common.h>
#include <plat/gpmc.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
#include "mux.h"
#include "control.h"
@@ -149,11 +152,6 @@
.resource = apollon_smc91x_resources,
};
-static struct platform_device apollon_lcd_device = {
- .name = "apollon_lcd",
- .id = -1,
-};
-
static struct omap_led_config apollon_led_config[] = {
{
.cdev = {
@@ -191,7 +189,6 @@
static struct platform_device *apollon_devices[] __initdata = {
&apollon_onenand_device,
&apollon_smc91x_device,
- &apollon_lcd_device,
&apollon_led_device,
};
@@ -265,19 +262,27 @@
.pins[0] = 6,
};
-static struct omap_lcd_config apollon_lcd_config __initdata = {
- .ctrl_name = "internal",
+static struct panel_generic_dpi_data apollon_panel_data = {
+ .name = "apollon",
};
-static struct omap_board_config_kernel apollon_config[] __initdata = {
- { OMAP_TAG_LCD, &apollon_lcd_config },
+static struct omap_dss_device apollon_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .data = &apollon_panel_data,
};
-static void __init omap_apollon_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
+static struct omap_dss_device *apollon_dss_devices[] = {
+ &apollon_lcd_device,
+};
+
+static struct omap_dss_board_info apollon_dss_data = {
+ .num_devices = ARRAY_SIZE(apollon_dss_devices),
+ .devices = apollon_dss_devices,
+ .default_device = &apollon_lcd_device,
+};
static struct gpio apollon_gpio_leds[] __initdata = {
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
@@ -314,8 +319,6 @@
u32 v;
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
- omap_board_config = apollon_config;
- omap_board_config_size = ARRAY_SIZE(apollon_config);
apollon_init_smc91x();
apollon_led_init();
@@ -340,20 +343,16 @@
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
-}
-
-static void __init omap_apollon_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
+ omap_sdrc_init(NULL, NULL);
+ omap_display_init(&apollon_dss_data);
}
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_apollon_map_io,
- .init_early = omap_apollon_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 3af8aab..bd1bcac 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -43,6 +43,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <mach/hardware.h>
@@ -242,8 +243,7 @@
.phy.dpi.data_lines = 18,
};
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
};
@@ -251,7 +251,7 @@
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -471,13 +471,6 @@
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
-static void __init cm_t35_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* nCS and IRQ for CM-T35 ethernet */
@@ -610,6 +603,8 @@
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
@@ -634,20 +629,20 @@
}
MACHINE_START(CM_T35, "Compulab CM-T35")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 05c72f4..3f4dc66 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -251,12 +251,6 @@
static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};
-static void __init cm_t3517_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@@ -289,6 +283,7 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = cm_t3517_config;
omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
@@ -299,10 +294,10 @@
}
MACHINE_START(CM_T3517, "Compulab CM-T3517")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t3517_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index b6002ec..4291894 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -47,6 +47,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -139,7 +140,7 @@
};
static struct panel_generic_dpi_data lcd_panel = {
- .name = "generic",
+ .name = "innolux_at070tn83",
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
@@ -152,8 +153,7 @@
.phy.dpi.data_lines = 24,
};
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
@@ -161,7 +161,7 @@
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -267,7 +267,7 @@
static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -397,19 +397,6 @@
},
};
-
-static void __init devkit8000_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init devkit8000_init_irq(void)
-{
- omap3_init_irq();
-}
-
#define OMAP_DM9000_BASE 0x2c000000
static struct resource omap_dm9000_resources[] = {
@@ -645,6 +632,8 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_dm9000_init();
@@ -667,11 +656,11 @@
}
MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = devkit8000_init_early,
- .init_irq = devkit8000_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index aa1b0cb..30a6f52 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -148,11 +148,6 @@
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
-#else
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
-{
-}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
/**
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c240a3f..d25503a 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -24,7 +24,26 @@
int nr_parts;
};
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
extern void board_flash_init(struct flash_partitions [],
char chip_sel[][GPMC_CS_NUM], int nand_type);
+#else
+static inline void board_flash_init(struct flash_partitions part[],
+ char chip_sel[][GPMC_CS_NUM], int nand_type)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type);
+#else
+static inline void board_nand_init(struct mtd_partition *nand_parts,
+ u8 nr_parts, u8 cs, int nand_type)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 54db41a..0cc9094e 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -1,76 +1,157 @@
/*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
#include <mach/hardware.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/gpio.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
-static struct omap_board_config_kernel generic_config[] = {
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
};
-static void __init omap_generic_init_early(void)
+static void __init omap4_i2c_init(void)
{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
+ omap4_pmic_init("twl6030", &sdp4430_twldata);
}
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static void __init omap3_i2c_init(void)
+{
+ omap3_pmic_init("twl4030", &beagle_twldata);
+}
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "ti,omap-infra", },
+ { }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+ { .compatible = "ti,omap3-intc", },
+ { .compatible = "arm,cortex-a9-gic", },
+ { }
+};
+
static void __init omap_generic_init(void)
{
+ struct device_node *node = of_find_matching_node(NULL, intc_match);
+ if (node)
+ irq_domain_add_simple(node, 0);
+
omap_serial_init();
- omap_board_config = generic_config;
- omap_board_config_size = ARRAY_SIZE(generic_config);
+ omap_sdrc_init(NULL, NULL);
+
+ of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
}
-static void __init omap_generic_map_io(void)
+static void __init omap4_init(void)
{
- if (cpu_is_omap242x()) {
- omap2_set_globals_242x();
- omap242x_map_common_io();
- } else if (cpu_is_omap243x()) {
- omap2_set_globals_243x();
- omap243x_map_common_io();
- } else if (cpu_is_omap34xx()) {
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
- } else if (cpu_is_omap44xx()) {
- omap2_set_globals_443x();
- omap44xx_map_common_io();
- }
+ omap4_i2c_init();
+ omap_generic_init();
}
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
- /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+static void __init omap3_init(void)
+{
+ omap3_i2c_init();
+ omap_generic_init();
+}
+
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+ "ti,omap2420",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_generic_map_io,
- .init_early = omap_generic_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
+ .dt_compat = omap242x_boards_compat,
MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+ "ti,omap2430",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
+ .init_irq = omap2_init_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap2_timer,
+ .dt_compat = omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+ "ti,omap3",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = omap3_init,
+ .timer = &omap3_timer,
+ .dt_compat = omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+ "ti,omap4",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
+ .init_irq = gic_init_irq,
+ .init_machine = omap4_init,
+ .timer = &omap4_timer,
+ .dt_compat = omap4_boards_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 45de2b3..c12666e 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
@@ -40,6 +39,9 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
#include "mux.h"
#include "control.h"
@@ -157,17 +159,33 @@
},
};
-static struct platform_device h4_lcd_device = {
- .name = "lcd_h4",
- .id = -1,
-};
-
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&h4_kp_device,
+};
+
+static struct panel_generic_dpi_data h4_panel_data = {
+ .name = "h4",
+};
+
+static struct omap_dss_device h4_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 16,
+ .data = &h4_panel_data,
+};
+
+static struct omap_dss_device *h4_dss_devices[] = {
&h4_lcd_device,
};
+static struct omap_dss_board_info h4_dss_data = {
+ .num_devices = ARRAY_SIZE(h4_dss_devices),
+ .devices = h4_dss_devices,
+ .default_device = &h4_lcd_device,
+};
+
/* 2420 Sysboot setup (2430 is different) */
static u32 get_sysboot_value(void)
{
@@ -271,10 +289,6 @@
h4_flash_resource.end = base + SZ_64M - 1;
}
-static struct omap_lcd_config h4_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct omap_usb_config h4_usb_config __initdata = {
/* S1.10 OFF -- usb "download port"
* usb0 switched to Mini-B port and isp1105 transceiver;
@@ -286,21 +300,6 @@
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
-static struct omap_board_config_kernel h4_config[] __initdata = {
- { OMAP_TAG_LCD, &h4_lcd_config },
-};
-
-static void __init omap_h4_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
-static void __init omap_h4_init_irq(void)
-{
- omap2_init_irq();
-}
-
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@@ -331,9 +330,6 @@
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
- omap_board_config = h4_config;
- omap_board_config_size = ARRAY_SIZE(h4_config);
-
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
@@ -371,22 +367,19 @@
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
h4_init_flash();
-}
-static void __init omap_h4_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
+ omap_display_init(&h4_dss_data);
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_h4_map_io,
- .init_early = omap_h4_init_early,
- .init_irq = omap_h4_init_irq,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
+ .init_irq = omap2_init_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 35be778..d0a3f78 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -32,7 +32,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/onenand.h>
#include "mux.h"
@@ -455,16 +455,16 @@
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
+ .i2c_bus_num = 3,
};
static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -491,13 +491,6 @@
&igep_vwlan_device,
};
-static void __init igep_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(m65kxxxxam_sdrc_params,
- m65kxxxxam_sdrc_params);
-}
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -650,6 +643,8 @@
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
omap_serial_init();
+ omap_sdrc_init(m65kxxxxam_sdrc_params,
+ m65kxxxxam_sdrc_params);
usb_musb_init(NULL);
igep_flash_init();
@@ -672,20 +667,20 @@
}
MACHINE_START(IGEP0020, "IGEP v2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 218764c..e179da0 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -34,7 +35,6 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
@@ -44,6 +44,9 @@
#include <plat/usb.h>
#include <plat/gpmc-smsc911x.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
#include "board-flash.h"
#include "mux.h"
#include "hsmmc.h"
@@ -180,29 +183,102 @@
gpmc_smsc911x_init(&smsc911x_cfg);
}
-static struct platform_device ldp_lcd_device = {
- .name = "ldp_lcd",
- .id = -1,
-};
+/* LCD */
-static struct omap_lcd_config ldp_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
+static int ldp_backlight_gpio;
+static int ldp_lcd_enable_gpio;
-static struct omap_board_config_kernel ldp_config[] __initdata = {
- { OMAP_TAG_LCD, &ldp_lcd_config },
-};
+#define LCD_PANEL_RESET_GPIO 55
+#define LCD_PANEL_QVGA_GPIO 56
-static void __init omap_ldp_init_early(void)
+static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
+ if (gpio_is_valid(ldp_lcd_enable_gpio))
+ gpio_direction_output(ldp_lcd_enable_gpio, 1);
+ if (gpio_is_valid(ldp_backlight_gpio))
+ gpio_direction_output(ldp_backlight_gpio, 1);
+
+ return 0;
+}
+
+static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ if (gpio_is_valid(ldp_lcd_enable_gpio))
+ gpio_direction_output(ldp_lcd_enable_gpio, 0);
+ if (gpio_is_valid(ldp_backlight_gpio))
+ gpio_direction_output(ldp_backlight_gpio, 0);
+}
+
+static struct panel_generic_dpi_data ldp_panel_data = {
+ .name = "nec_nl2432dr22-11b",
+ .platform_enable = ldp_panel_enable_lcd,
+ .platform_disable = ldp_panel_disable_lcd,
+};
+
+static struct omap_dss_device ldp_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .data = &ldp_panel_data,
+};
+
+static struct omap_dss_device *ldp_dss_devices[] = {
+ &ldp_lcd_device,
+};
+
+static struct omap_dss_board_info ldp_dss_data = {
+ .num_devices = ARRAY_SIZE(ldp_dss_devices),
+ .devices = ldp_dss_devices,
+ .default_device = &ldp_lcd_device,
+};
+
+static void __init ldp_display_init(void)
+{
+ int r;
+
+ static struct gpio gpios[] __initdata = {
+ {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
+ {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
+ };
+
+ r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+ if (r) {
+ pr_err("Cannot request LCD GPIOs, error %d\n", r);
+ return;
+ }
+
+ omap_display_init(&ldp_dss_data);
+}
+
+static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
+{
+ int r;
+
+ struct gpio gpios[] = {
+ {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
+ {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
+ };
+
+ r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+ if (r) {
+ pr_err("Cannot request LCD GPIOs, error %d\n", r);
+ ldp_backlight_gpio = -EINVAL;
+ ldp_lcd_enable_gpio = -EINVAL;
+ return r;
+ }
+
+ ldp_backlight_gpio = gpio + 15;
+ ldp_lcd_enable_gpio = gpio + 7;
+
+ return 0;
}
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .setup = ldp_twl_gpio_setup,
};
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
@@ -244,10 +320,31 @@
.consumer_supplies = ldp_vaux1_supplies,
};
+static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
+static struct regulator_init_data ldp_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies),
+ .consumer_supplies = ldp_vpll2_supplies,
+};
+
static struct twl4030_platform_data ldp_twldata = {
/* platform_data for children goes here */
.vmmc1 = &ldp_vmmc1,
.vaux1 = &ldp_vaux1,
+ .vpll2 = &ldp_vpll2,
.gpio = &ldp_gpio_data,
.keypad = &ldp_kp_twl4030_data,
};
@@ -273,7 +370,6 @@
};
static struct platform_device *ldp_devices[] __initdata = {
- &ldp_lcd_device,
&ldp_gpio_keys_device,
};
@@ -318,25 +414,25 @@
static void __init omap_ldp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = ldp_config;
- omap_board_config_size = ARRAY_SIZE(ldp_config);
ldp_init_smsc911x();
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
omap2_hsmmc_init(mmc);
+ ldp_display_init();
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_ldp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e11f0c5..e9d5f4a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -616,18 +616,6 @@
},
};
-static void __init n8x0_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
-static void __init n8x0_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
@@ -689,36 +677,37 @@
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..4a71cb7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,7 +42,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -203,16 +203,16 @@
gpio_set_value(dssdev->reset_gpio, 0);
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
+ .i2c_bus_num = 3,
};
static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL,
@@ -378,7 +378,8 @@
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
beagle_twldata.vpll2->constraints.name = "VDVI";
@@ -444,21 +445,15 @@
},
};
-static void __init omap3_beagle_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_beagle_init_irq(void)
-{
- omap3_init_irq();
-}
+static struct platform_device madc_hwmon = {
+ .name = "twl4030_madc_hwmon",
+ .id = -1,
+};
static struct platform_device *omap3_beagle_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
+ &madc_hwmon,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
@@ -493,8 +488,8 @@
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap2_get_mpuss_device();
- iva_dev = omap2_get_iva_device();
+ mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ iva_dev = omap_device_get_by_hwmod_name("iva");
if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
@@ -534,6 +529,8 @@
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -557,11 +554,11 @@
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_beagle_init_early,
- .init_irq = omap3_beagle_init_irq,
+ .init_early = omap3_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c452b3f..2d24e28 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -45,7 +45,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -247,8 +247,7 @@
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
@@ -256,7 +255,7 @@
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -520,12 +519,6 @@
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
-static void __init omap3_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -640,6 +633,7 @@
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
@@ -681,10 +675,10 @@
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_evm_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 703aeb5..7c0f193 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -182,12 +182,6 @@
gpmc_smsc911x_init(&board_smsc911x_data);
}
-static void __init omap3logic_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -200,6 +194,7 @@
omap3torpedo_fix_pbias_voltage();
omap3logic_i2c_init();
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
board_mmc_init();
board_smsc911x_init();
@@ -209,18 +204,18 @@
}
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 080d7bd..f7811f4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -335,7 +335,7 @@
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
@@ -525,13 +525,6 @@
}
};
-static void __init omap3pandora_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static void __init pandora_wl1251_init(void)
{
struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -593,6 +586,8 @@
ARRAY_SIZE(omap3pandora_devices));
omap_display_init(&pandora_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
@@ -606,10 +601,10 @@
}
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3pandora_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e10498..ddb7d66 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -41,6 +41,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -107,39 +108,6 @@
return;
}
-static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
- gpio_set_value(DSS_ENABLE_GPIO, 1);
- gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
- lcd_enabled = 1;
- return 0;
-}
-
-static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(DSS_ENABLE_GPIO, 0);
- gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
- lcd_enabled = 0;
-}
-
-static struct panel_generic_dpi_data lcd_panel = {
- .name = "generic",
- .platform_enable = omap3_stalker_enable_lcd,
- .platform_disable = omap3_stalker_disable_lcd,
-};
-
-static struct omap_dss_device omap3_stalker_lcd_device = {
- .name = "lcd",
- .driver_name = "generic_dpi_panel",
- .data = &lcd_panel,
- .phy.dpi.data_lines = 24,
- .type = OMAP_DISPLAY_TYPE_DPI,
-};
-
static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
@@ -179,8 +147,7 @@
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
};
@@ -188,13 +155,12 @@
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
static struct omap_dss_device *omap3_stalker_dss_devices[] = {
- &omap3_stalker_lcd_device,
&omap3_stalker_tv_device,
&omap3_stalker_dvi_device,
};
@@ -428,17 +394,6 @@
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
-static void __init omap3_stalker_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
-static void __init omap3_stalker_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
@@ -478,6 +433,7 @@
omap_display_init(&omap3_stalker_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -494,10 +450,10 @@
MACHINE_START(SBC3530, "OMAP3 STALKER")
/* Maintainer: Jason Lam -lzg@ema-tech.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3_stalker_init_early,
- .init_irq = omap3_stalker_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 852ea04..a2d0d19 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -104,15 +104,6 @@
{} /* Terminator */
};
-static struct platform_device omap3_touchbook_lcd_device = {
- .name = "omap3touchbook_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -165,14 +156,12 @@
static struct regulator_consumer_supply touchbook_vdac_supply[] = {
{
.supply = "vdac",
- .dev = &omap3_touchbook_lcd_device.dev,
},
};
static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
{
.supply = "vdvi",
- .dev = &omap3_touchbook_lcd_device.dev,
},
};
@@ -316,30 +305,13 @@
},
};
-static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
- { OMAP_TAG_LCD, &omap3_touchbook_lcd_config },
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
-static void __init omap3_touchbook_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_touchbook_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_touchbook_devices[] __initdata = {
- &omap3_touchbook_lcd_device,
&leds_gpio,
&keys_gpio,
};
@@ -376,8 +348,6 @@
static void __init omap3_touchbook_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = omap3_touchbook_config;
- omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
pm_power_off = omap3_touchbook_poweroff;
@@ -385,6 +355,8 @@
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -404,11 +376,11 @@
MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_touchbook_init_early,
- .init_irq = omap3_touchbook_init_irq,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..a8c2c42 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -40,7 +40,7 @@
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/mmc.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "hsmmc.h"
#include "control.h"
@@ -95,12 +95,6 @@
&wl1271_device,
};
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -455,16 +449,16 @@
}
/* Using generic display panel */
-static struct panel_generic_dpi_data omap4_dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data omap4_dvi_panel = {
.platform_enable = omap4_panda_enable_dvi,
.platform_disable = omap4_panda_disable_dvi,
+ .i2c_bus_num = 3,
};
struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
@@ -569,24 +563,19 @@
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
-static void __init omap4_panda_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f949a99..4cf7aea 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -46,6 +46,7 @@
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
@@ -182,16 +183,16 @@
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = overo_panel_enable_dvi,
.platform_disable = overo_panel_disable_dvi,
+ .i2c_bus_num = 3,
};
static struct omap_dss_device overo_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -478,13 +479,6 @@
return 0;
}
-static void __init overo_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -514,6 +508,8 @@
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_nand_flash_init(0, overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions));
usb_musb_init(NULL);
@@ -561,10 +557,10 @@
}
MACHINE_START(OVERO, "Gumstix Overo")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = overo_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 7dfed24..616fb397 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -123,15 +123,6 @@
omap2_hsmmc_init(mmc);
}
-static void __init rm680_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -140,23 +131,23 @@
static void __init rm680_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(NULL);
rm680_peripherals_init();
}
-static void __init rm680_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = rm680_map_io,
- .init_early = rm680_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 5a886cd..ba1aa07 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -900,7 +900,6 @@
};
static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
- .id = TPA6130A2,
.power_gpio = 98,
};
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 5ea142f..4af7c4b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -79,38 +79,6 @@
{7505 + 15274, 484329, 1},
};
-static struct omap_lcd_config rx51_lcd_config = {
- .ctrl_name = "internal",
-};
-
-static struct omap_fbmem_config rx51_fbmem0_config = {
- .size = 752 * 1024,
-};
-
-static struct omap_fbmem_config rx51_fbmem1_config = {
- .size = 752 * 1024,
-};
-
-static struct omap_fbmem_config rx51_fbmem2_config = {
- .size = 752 * 1024,
-};
-
-static struct omap_board_config_kernel rx51_config[] = {
- { OMAP_TAG_FBMEM, &rx51_fbmem0_config },
- { OMAP_TAG_FBMEM, &rx51_fbmem1_config },
- { OMAP_TAG_FBMEM, &rx51_fbmem2_config },
- { OMAP_TAG_LCD, &rx51_lcd_config },
-};
-
-static void __init rx51_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
@@ -127,11 +95,15 @@
static void __init rx51_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = rx51_config;
- omap_board_config_size = ARRAY_SIZE(rx51_config);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
@@ -142,12 +114,6 @@
platform_device_register(&leds_gpio);
}
-static void __init rx51_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static void __init rx51_reserve(void)
{
rx51_video_mem_init();
@@ -156,10 +122,10 @@
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = rx51_reserve,
- .map_io = rx51_map_io,
- .init_early = rx51_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index a85d5b0..e6ee884 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -27,30 +27,24 @@
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
-static void __init ti8168_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static void __init ti8168_evm_init(void)
{
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = ti8168_evm_config;
omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
}
static void __init ti8168_evm_map_io(void)
{
- omap2_set_globals_ti816x();
omapti816x_map_common_io();
}
MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = ti8168_evm_map_io,
- .init_early = ti8168_init_early,
+ .init_early = ti816x_init_early,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 8a98c3c..be6684d 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -34,17 +34,6 @@
#define ZOOM3_EHCI_RESET_GPIO 64
-static void __init omap_zoom_init_early(void)
-{
- omap2_init_common_infrastructure();
- if (machine_is_omap_zoom2())
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- else if (machine_is_omap_zoom3())
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
@@ -129,24 +118,32 @@
ZOOM_NAND_CS, NAND_BUSWIDTH_16);
zoom_debugboard_init();
zoom_peripherals_init();
+
+ if (machine_is_omap_zoom2())
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ else if (machine_is_omap_zoom3())
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
+
zoom_display_init();
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index debc040..14a6277 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1898,6 +1898,54 @@
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 96a942e..ea6717c 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1998,6 +1998,54 @@
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index b9b8446..65dd363 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3464,6 +3464,42 @@
CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX),
+ CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX),
};
@@ -3472,7 +3508,16 @@
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ /*
+ * 3505 must be tested before 3517, since 3517 returns true
+ * for both AM3517 chips and AM3517 family chips, which
+ * includes 3505. Unfortunately there's no obvious family
+ * test for 3517/3505 :-(
+ */
+ if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_34XX;
+ cpu_clkflg = CK_3505;
+ } else if (cpu_is_omap3517()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_3517;
} else if (cpu_is_omap3505()) {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index c0b6fbd..946bf04 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3363,6 +3363,39 @@
CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
+ CLK("omap_timer.1", "fck", &timer1_fck, CK_443X),
+ CLK("omap_timer.2", "fck", &timer2_fck, CK_443X),
+ CLK("omap_timer.3", "fck", &timer3_fck, CK_443X),
+ CLK("omap_timer.4", "fck", &timer4_fck, CK_443X),
+ CLK("omap_timer.5", "fck", &timer5_fck, CK_443X),
+ CLK("omap_timer.6", "fck", &timer6_fck, CK_443X),
+ CLK("omap_timer.7", "fck", &timer7_fck, CK_443X),
+ CLK("omap_timer.8", "fck", &timer8_fck, CK_443X),
+ CLK("omap_timer.9", "fck", &timer9_fck, CK_443X),
+ CLK("omap_timer.10", "fck", &timer10_fck, CK_443X),
+ CLK("omap_timer.11", "fck", &timer11_fck, CK_443X),
+ CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8f08906..8480ee4 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -73,9 +73,6 @@
if (!clkdm || !clkdm->name)
return -EINVAL;
- if (!omap_chip_is(clkdm->omap_chip))
- return -EINVAL;
-
pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
if (!pwrdm) {
pr_err("clockdomain: %s: powerdomain %s does not exist\n",
@@ -105,13 +102,10 @@
{
struct clkdm_dep *cd;
- if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+ if (!clkdm || !deps)
return ERR_PTR(-EINVAL);
for (cd = deps; cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
-
if (!cd->clkdm && cd->clkdm_name)
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -148,9 +142,6 @@
if (!autodep)
return;
- if (!omap_chip_is(autodep->omap_chip))
- return;
-
clkdm = clkdm_lookup(autodep->clkdm.name);
if (!clkdm) {
pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
@@ -182,9 +173,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -216,9 +204,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -243,8 +228,6 @@
struct clkdm_dep *cd;
for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (cd->clkdm)
continue;
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -257,43 +240,113 @@
/* Public functions */
/**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specific implementations
+ * clkdm_register_platform_funcs - register clockdomain implementation fns
+ * @co: func pointers for arch specific implementations
*
- * Set up internal state. If a pointer to an array of clockdomains
- * @clkdms was supplied, loop through the list of clockdomains,
- * register all that are available on the current platform. Similarly,
- * if a pointer to an array of clockdomain autodependencies
- * @init_autodeps was provided, register those. No return value.
+ * Register the list of function pointers used to implement the
+ * clockdomain functions on different OMAP SoCs. Should be called
+ * before any other clkdm_register*() function. Returns -EINVAL if
+ * @co is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void clkdm_init(struct clockdomain **clkdms,
- struct clkdm_autodep *init_autodeps,
- struct clkdm_ops *custom_funcs)
+int clkdm_register_platform_funcs(struct clkdm_ops *co)
+{
+ if (!co)
+ return -EINVAL;
+
+ if (arch_clkdm)
+ return -EEXIST;
+
+ arch_clkdm = co;
+
+ return 0;
+};
+
+/**
+ * clkdm_register_clkdms - register SoC clockdomains
+ * @cs: pointer to an array of struct clockdomain to register
+ *
+ * Register the clockdomains available on a particular OMAP SoC. Must
+ * be called after clkdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
+ * null; or 0 upon success.
+ */
+int clkdm_register_clkdms(struct clockdomain **cs)
{
struct clockdomain **c = NULL;
- struct clockdomain *clkdm;
- struct clkdm_autodep *autodep = NULL;
- if (!custom_funcs)
- WARN(1, "No custom clkdm functions registered\n");
- else
- arch_clkdm = custom_funcs;
+ if (!arch_clkdm)
+ return -EACCES;
- if (clkdms)
- for (c = clkdms; *c; c++)
- _clkdm_register(*c);
+ if (!cs)
+ return -EINVAL;
- autodeps = init_autodeps;
+ for (c = cs; *c; c++)
+ _clkdm_register(*c);
+
+ return 0;
+}
+
+/**
+ * clkdm_register_autodeps - register autodeps (if required)
+ * @ia: pointer to a static array of struct clkdm_autodep to register
+ *
+ * Register clockdomain "automatic dependencies." These are
+ * clockdomain wakeup and sleep dependencies that are automatically
+ * added whenever the first clock inside a clockdomain is enabled, and
+ * removed whenever the last clock inside a clockdomain is disabled.
+ * These are currently only used on OMAP3 devices, and are deprecated,
+ * since they waste energy. However, until the OMAP2/3 IP block
+ * enable/disable sequence can be converted to match the OMAP4
+ * sequence, they are needed.
+ *
+ * Must be called only after all of the SoC clockdomains are
+ * registered, since the function will resolve autodep clockdomain
+ * names into clockdomain pointers.
+ *
+ * The struct clkdm_autodep @ia array must be static, as this function
+ * does not copy the array elements.
+ *
+ * Returns -EACCES if called before any clockdomains have been
+ * registered, -EINVAL if called with a null @ia argument, -EEXIST if
+ * autodeps have already been registered, or 0 upon success.
+ */
+int clkdm_register_autodeps(struct clkdm_autodep *ia)
+{
+ struct clkdm_autodep *a = NULL;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
+ if (!ia)
+ return -EINVAL;
+
if (autodeps)
- for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
- _autodep_lookup(autodep);
+ return -EEXIST;
- /*
- * Put all clockdomains into software-supervised mode; PM code
- * should later enable hardware-supervised mode as appropriate
- */
+ autodeps = ia;
+ for (a = autodeps; a->clkdm.ptr; a++)
+ _autodep_lookup(a);
+
+ return 0;
+}
+
+/**
+ * clkdm_complete_init - set up the clockdomain layer
+ *
+ * Put all clockdomains into software-supervised mode; PM code should
+ * later enable hardware-supervised mode as appropriate. Must be
+ * called after clkdm_register_clkdms(). Returns -EACCES if called
+ * before clkdm_register_clkdms(), or 0 upon success.
+ */
+int clkdm_complete_init(void)
+{
+ struct clockdomain *clkdm;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
list_for_each_entry(clkdm, &clkdm_list, node) {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
clkdm_wakeup(clkdm);
@@ -306,6 +359,8 @@
_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
clkdm_clear_all_sleepdeps(clkdm);
}
+
+ return 0;
}
/**
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 1e50c88..f7b58609 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -45,7 +45,6 @@
/**
* struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
* @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
*
* A clockdomain that should have wkdeps and sleepdeps added when a
* clockdomain should stay active in hwsup mode; and conversely,
@@ -60,14 +59,12 @@
const char *name;
struct clockdomain *ptr;
} clkdm;
- const struct omap_chip_id omap_chip;
};
/**
* struct clkdm_dep - encode dependencies between clockdomains
* @clkdm_name: clockdomain name
* @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
* @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
* @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
*
@@ -81,7 +78,6 @@
struct clockdomain *clkdm;
atomic_t wkdep_usecount;
atomic_t sleepdep_usecount;
- const struct omap_chip_id omap_chip;
};
/* Possible flags for struct clockdomain._flags */
@@ -101,7 +97,6 @@
* @clkdm_offs: (OMAP4 only) CM clockdomain register offset
* @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
* @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
* @usecount: Usecount tracking
* @node: list_head to link all clockdomains together
*
@@ -126,7 +121,6 @@
const u16 clkdm_offs;
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
- const struct omap_chip_id omap_chip;
atomic_t usecount;
struct list_head node;
spinlock_t lock;
@@ -166,8 +160,11 @@
int (*clkdm_clk_disable)(struct clockdomain *clkdm);
};
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps,
- struct clkdm_ops *custom_funcs);
+int clkdm_register_platform_funcs(struct clkdm_ops *co);
+int clkdm_register_autodeps(struct clkdm_autodep *ia);
+int clkdm_register_clkdms(struct clockdomain **c);
+int clkdm_complete_init(void);
+
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
@@ -195,7 +192,8 @@
int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
-extern void __init omap2xxx_clockdomains_init(void);
+extern void __init omap242x_clockdomains_init(void);
+extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
@@ -205,4 +203,10 @@
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_dep gfx_24xx_wkdeps[];
+extern struct clkdm_dep dsp_24xx_wkdeps[];
+extern struct clockdomain wkup_common_clkdm;
+extern struct clockdomain prm_common_clkdm;
+extern struct clockdomain cm_common_clkdm;
+
#endif
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index f740edb..a0d68db 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
@@ -98,8 +96,6 @@
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index b43706a..935c7f0 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
new file mode 100644
index 0000000..0ab8e46
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -0,0 +1,154 @@
+/*
+ * OMAP2420 clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2420 chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2420-specific possible wakeup dependencies */
+
+/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
+static struct clkdm_dep mpu_2420_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
+static struct clkdm_dep core_2420_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+static struct clockdomain mpu_2420_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = mpu_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+ .name = "iva1_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+};
+
+static struct clockdomain dsp_2420_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2420_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap242x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2420_clkdm,
+ &iva1_2420_clkdm,
+ &dsp_2420_clkdm,
+ &gfx_2420_clkdm,
+ &core_l3_2420_clkdm,
+ &core_l4_2420_clkdm,
+ &dss_2420_clkdm,
+ NULL,
+};
+
+void __init omap242x_clockdomains_init(void)
+{
+ if (!cpu_is_omap242x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap242x);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
new file mode 100644
index 0000000..3645ed0
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -0,0 +1,181 @@
+/*
+ * OMAP2xxx clockdomains
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2430-specific possible wakeup dependencies */
+
+/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
+static struct clkdm_dep core_2430_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
+static struct clkdm_dep mpu_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2430-only clockdomains
+ */
+
+static struct clockdomain mpu_2430_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = mpu_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct clockdomain mdm_clkdm = {
+ .name = "mdm_clkdm",
+ .pwrdm = { .name = "mdm_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+ .wkdep_srcs = mdm_2430_wkdeps,
+ .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+};
+
+static struct clockdomain dsp_2430_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2430_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap243x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2430_clkdm,
+ &mdm_clkdm,
+ &dsp_2430_clkdm,
+ &gfx_2430_clkdm,
+ &core_l3_2430_clkdm,
+ &core_l4_2430_clkdm,
+ &dss_2430_clkdm,
+ NULL,
+};
+
+void __init omap243x_clockdomains_init(void)
+{
+ if (!cpu_is_omap243x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap243x);
+ clkdm_complete_init();
+}
+
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 13bde95..0a6a048 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
- * OMAP2/3 clockdomains
+ * OMAP2/3 clockdomain common data
*
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -51,374 +51,28 @@
* changed in software) are not included here yet, but should be.
*/
-/* OMAP2/3-common wakeup dependencies */
-
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 24XX-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP2
-
/* Wakeup dependency source arrays */
-/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
-static struct clkdm_dep dsp_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
+/* 2xxx-specific possible dependencies */
+
+/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
+struct clkdm_dep gfx_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep mpu_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
+/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
+struct clkdm_dep dsp_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep core_24xx_wkdeps[] = {
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-/* 2430-specific possible wakeup dependencies */
-
-#ifdef CONFIG_SOC_OMAP2430
-
-/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
-static struct clkdm_dep mdm_2430_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- { NULL },
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/* OMAP3-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep per_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep usbhost_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
-static struct clkdm_dep mpu_3xxx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
-static struct clkdm_dep iva2_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
-static struct clkdm_dep cam_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
-static struct clkdm_dep dss_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct clkdm_dep neon_wkdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* Sleep dependency source arrays for OMAP3-specific clkdms */
-
-/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
-static struct clkdm_dep dss_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
-static struct clkdm_dep per_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
-static struct clkdm_dep usbhost_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_CAM: MPU */
-static struct clkdm_dep cam_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* OMAP2/3-common clockdomains
@@ -430,439 +84,18 @@
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
-static struct clockdomain wkup_clkdm = {
+struct clockdomain wkup_common_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain prm_clkdm = {
+struct clockdomain prm_common_clkdm = {
.name = "prm_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain cm_clkdm = {
+struct clockdomain cm_common_clkdm = {
.name = "cm_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-
-/*
- * 2420-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct clockdomain mpu_2420_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain iva1_2420_clkdm = {
- .name = "iva1_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dsp_2420_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain gfx_2420_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l3_2420_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l4_2420_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dss_2420_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-#endif /* CONFIG_SOC_OMAP2420 */
-
-
-/*
- * 2430-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct clockdomain mpu_2430_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/* Another case of bit name collisions between several registers: EN_MDM */
-static struct clockdomain mdm_clkdm = {
- .name = "mdm_clkdm",
- .pwrdm = { .name = "mdm_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
- .wkdep_srcs = mdm_2430_wkdeps,
- .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dsp_2430_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain gfx_2430_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_2430_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_2430_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dss_2430_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/*
- * OMAP3 clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct clockdomain mpu_3xxx_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
- .dep_bit = OMAP3430_EN_MPU_SHIFT,
- .wkdep_srcs = mpu_3xxx_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain neon_clkdm = {
- .name = "neon_clkdm",
- .pwrdm = { .name = "neon_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = neon_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain iva2_clkdm = {
- .name = "iva2_clkdm",
- .pwrdm = { .name = "iva2_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
- .wkdep_srcs = iva2_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain gfx_3430es1_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
-};
-
-static struct clockdomain sgx_clkdm = {
- .name = "sgx_clkdm",
- .pwrdm = { .name = "sgx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-/*
- * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
- * then that information was removed from the 34xx ES2+ TRM. It is
- * unclear whether the core is still there, but the clockdomain logic
- * is there, and must be programmed to an appropriate state if the
- * CORE clockdomain is to become inactive.
- */
-static struct clockdomain d2d_clkdm = {
- .name = "d2d_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_3xxx_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_3xxx_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/* Another case of bit name collisions between several registers: EN_DSS */
-static struct clockdomain dss_3xxx_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "dss_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
- .wkdep_srcs = dss_wkdeps,
- .sleepdep_srcs = dss_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain cam_clkdm = {
- .name = "cam_clkdm",
- .pwrdm = { .name = "cam_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = cam_wkdeps,
- .sleepdep_srcs = cam_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain usbhost_clkdm = {
- .name = "usbhost_clkdm",
- .pwrdm = { .name = "usbhost_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = usbhost_wkdeps,
- .sleepdep_srcs = usbhost_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-static struct clockdomain per_clkdm = {
- .name = "per_clkdm",
- .pwrdm = { .name = "per_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_EN_PER_SHIFT,
- .wkdep_srcs = per_wkdeps,
- .sleepdep_srcs = per_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
-static struct clockdomain emu_clkdm = {
- .name = "emu_clkdm",
- .pwrdm = { .name = "emu_pwrdm" },
- .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll1_clkdm = {
- .name = "dpll1_clkdm",
- .pwrdm = { .name = "dpll1_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll2_clkdm = {
- .name = "dpll2_clkdm",
- .pwrdm = { .name = "dpll2_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll3_clkdm = {
- .name = "dpll3_clkdm",
- .pwrdm = { .name = "dpll3_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll4_clkdm = {
- .name = "dpll4_clkdm",
- .pwrdm = { .name = "dpll4_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll5_clkdm = {
- .name = "dpll5_clkdm",
- .pwrdm = { .name = "dpll5_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
-/*
- * Clockdomain hwsup dependencies (OMAP3 only)
- */
-
-static struct clkdm_autodep clkdm_autodeps[] = {
- {
- .clkdm = { .name = "mpu_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = "iva2_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = NULL },
- }
-};
-
-static struct clockdomain *clockdomains_omap2[] __initdata = {
- &wkup_clkdm,
- &cm_clkdm,
- &prm_clkdm,
-
-#ifdef CONFIG_SOC_OMAP2420
- &mpu_2420_clkdm,
- &iva1_2420_clkdm,
- &dsp_2420_clkdm,
- &gfx_2420_clkdm,
- &core_l3_2420_clkdm,
- &core_l4_2420_clkdm,
- &dss_2420_clkdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mpu_2430_clkdm,
- &mdm_clkdm,
- &dsp_2430_clkdm,
- &gfx_2430_clkdm,
- &core_l3_2430_clkdm,
- &core_l4_2430_clkdm,
- &dss_2430_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
- &mpu_3xxx_clkdm,
- &neon_clkdm,
- &iva2_clkdm,
- &gfx_3430es1_clkdm,
- &sgx_clkdm,
- &d2d_clkdm,
- &core_l3_3xxx_clkdm,
- &core_l4_3xxx_clkdm,
- &dss_3xxx_clkdm,
- &cam_clkdm,
- &usbhost_clkdm,
- &per_clkdm,
- &emu_clkdm,
- &dpll1_clkdm,
- &dpll2_clkdm,
- &dpll3_clkdm,
- &dpll4_clkdm,
- &dpll5_clkdm,
-#endif
- NULL,
-};
-
-void __init omap2xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations);
-}
-
-void __init omap3xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations);
-}
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
new file mode 100644
index 0000000..b84e138
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -0,0 +1,398 @@
+/*
+ * OMAP3xxx clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP3xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies. Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP3-specific possible dependencies */
+
+/*
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm", },
+ { .clkdm_name = "mpu_clkdm", },
+ { .clkdm_name = "wkup_clkdm", },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * OMAP3 clockdomains
+ */
+
+static struct clockdomain mpu_3xxx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_3xxx_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+};
+
+static struct clockdomain neon_clkdm = {
+ .name = "neon_clkdm",
+ .pwrdm = { .name = "neon_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = neon_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+};
+
+static struct clockdomain iva2_clkdm = {
+ .name = "iva2_clkdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+ .wkdep_srcs = iva2_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+};
+
+static struct clockdomain sgx_clkdm = {
+ .name = "sgx_clkdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM. It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+ .name = "d2d_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "dss_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = dss_wkdeps,
+ .sleepdep_srcs = dss_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+};
+
+static struct clockdomain cam_clkdm = {
+ .name = "cam_clkdm",
+ .pwrdm = { .name = "cam_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = cam_wkdeps,
+ .sleepdep_srcs = cam_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+};
+
+static struct clockdomain usbhost_clkdm = {
+ .name = "usbhost_clkdm",
+ .pwrdm = { .name = "usbhost_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = usbhost_wkdeps,
+ .sleepdep_srcs = usbhost_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+};
+
+static struct clockdomain per_clkdm = {
+ .name = "per_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_wkdeps,
+ .sleepdep_srcs = per_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+};
+
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
+static struct clockdomain emu_clkdm = {
+ .name = "emu_clkdm",
+ .pwrdm = { .name = "emu_pwrdm" },
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+};
+
+static struct clockdomain dpll1_clkdm = {
+ .name = "dpll1_clkdm",
+ .pwrdm = { .name = "dpll1_pwrdm" },
+};
+
+static struct clockdomain dpll2_clkdm = {
+ .name = "dpll2_clkdm",
+ .pwrdm = { .name = "dpll2_pwrdm" },
+};
+
+static struct clockdomain dpll3_clkdm = {
+ .name = "dpll3_clkdm",
+ .pwrdm = { .name = "dpll3_pwrdm" },
+};
+
+static struct clockdomain dpll4_clkdm = {
+ .name = "dpll4_clkdm",
+ .pwrdm = { .name = "dpll4_pwrdm" },
+};
+
+static struct clockdomain dpll5_clkdm = {
+ .name = "dpll5_clkdm",
+ .pwrdm = { .name = "dpll5_pwrdm" },
+};
+
+/*
+ * Clockdomain hwsup dependencies
+ */
+
+static struct clkdm_autodep clkdm_autodeps[] = {
+ {
+ .clkdm = { .name = "mpu_clkdm" },
+ },
+ {
+ .clkdm = { .name = "iva2_clkdm" },
+ },
+ {
+ .clkdm = { .name = NULL },
+ }
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_3xxx_clkdm,
+ &neon_clkdm,
+ &iva2_clkdm,
+ &d2d_clkdm,
+ &core_l3_3xxx_clkdm,
+ &core_l4_3xxx_clkdm,
+ &dss_3xxx_clkdm,
+ &cam_clkdm,
+ &per_clkdm,
+ &emu_clkdm,
+ &dpll1_clkdm,
+ &dpll2_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ NULL
+};
+
+static struct clockdomain *clockdomains_omap3430es1[] __initdata = {
+ &gfx_3430es1_clkdm,
+ NULL,
+};
+
+static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = {
+ &sgx_clkdm,
+ &dpll5_clkdm,
+ &usbhost_clkdm,
+ NULL,
+};
+
+void __init omap3xxx_clockdomains_init(void)
+{
+ struct clockdomain **sc;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ clkdm_register_platform_funcs(&omap3_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap3430_common);
+
+ sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
+ clockdomains_omap3430es2plus;
+
+ clkdm_register_clkdms(sc);
+
+ clkdm_register_autodeps(clkdm_autodeps);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index dccc651..9299ac2 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -34,350 +34,122 @@
/* Static Dependencies for OMAP4 Clock Domains */
static struct clkdm_dep d2d_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep ducati_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep iss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dma_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_init_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep mpu_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep tesla_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
@@ -388,7 +160,6 @@
.cm_inst = OMAP4430_CM2_CEFUSE_INST,
.clkdm_offs = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_cfg_44xx_clkdm = {
@@ -399,7 +170,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L4CFG_CDOFFS,
.dep_bit = OMAP4430_L4CFG_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain tesla_44xx_clkdm = {
@@ -412,7 +182,6 @@
.wkdep_srcs = tesla_wkup_sleep_deps,
.sleepdep_srcs = tesla_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_gfx_44xx_clkdm = {
@@ -425,7 +194,6 @@
.wkdep_srcs = l3_gfx_wkup_sleep_deps,
.sleepdep_srcs = l3_gfx_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ivahd_44xx_clkdm = {
@@ -438,7 +206,6 @@
.wkdep_srcs = ivahd_wkup_sleep_deps,
.sleepdep_srcs = ivahd_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_secure_44xx_clkdm = {
@@ -451,7 +218,6 @@
.wkdep_srcs = l4_secure_wkup_sleep_deps,
.sleepdep_srcs = l4_secure_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_per_44xx_clkdm = {
@@ -462,7 +228,6 @@
.clkdm_offs = OMAP4430_CM2_L4PER_L4PER_CDOFFS,
.dep_bit = OMAP4430_L4PER_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain abe_44xx_clkdm = {
@@ -473,7 +238,6 @@
.clkdm_offs = OMAP4430_CM1_ABE_ABE_CDOFFS,
.dep_bit = OMAP4430_ABE_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_instr_44xx_clkdm = {
@@ -482,7 +246,6 @@
.prcm_partition = OMAP4430_CM2_PARTITION,
.cm_inst = OMAP4430_CM2_CORE_INST,
.clkdm_offs = OMAP4430_CM2_CORE_L3INSTR_CDOFFS,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_init_44xx_clkdm = {
@@ -495,7 +258,6 @@
.wkdep_srcs = l3_init_wkup_sleep_deps,
.sleepdep_srcs = l3_init_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain d2d_44xx_clkdm = {
@@ -507,7 +269,6 @@
.wkdep_srcs = d2d_wkup_sleep_deps,
.sleepdep_srcs = d2d_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu0_44xx_clkdm = {
@@ -517,7 +278,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU0_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu1_44xx_clkdm = {
@@ -527,7 +287,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU1_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_emif_44xx_clkdm = {
@@ -538,7 +297,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_MEMIF_CDOFFS,
.dep_bit = OMAP4430_MEMIF_STATDEP_SHIFT,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_ao_44xx_clkdm = {
@@ -548,7 +306,6 @@
.cm_inst = OMAP4430_CM2_ALWAYS_ON_INST,
.clkdm_offs = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ducati_44xx_clkdm = {
@@ -561,7 +318,6 @@
.wkdep_srcs = ducati_wkup_sleep_deps,
.sleepdep_srcs = ducati_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu_44xx_clkdm = {
@@ -573,7 +329,6 @@
.wkdep_srcs = mpu_wkup_sleep_deps,
.sleepdep_srcs = mpu_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_2_44xx_clkdm = {
@@ -584,7 +339,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_2_CDOFFS,
.dep_bit = OMAP4430_L3_2_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_1_44xx_clkdm = {
@@ -595,7 +349,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_1_CDOFFS,
.dep_bit = OMAP4430_L3_1_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain iss_44xx_clkdm = {
@@ -607,7 +360,6 @@
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dss_44xx_clkdm = {
@@ -620,7 +372,6 @@
.wkdep_srcs = l3_dss_wkup_sleep_deps,
.sleepdep_srcs = l3_dss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_wkup_44xx_clkdm = {
@@ -631,7 +382,6 @@
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain emu_sys_44xx_clkdm = {
@@ -641,7 +391,6 @@
.cm_inst = OMAP4430_PRM_EMU_CM_INST,
.clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dma_44xx_clkdm = {
@@ -653,7 +402,6 @@
.wkdep_srcs = l3_dma_wkup_sleep_deps,
.sleepdep_srcs = l3_dma_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* As clockdomains are added or removed above, this list must also be changed */
@@ -685,7 +433,10 @@
NULL
};
+
void __init omap44xx_clockdomains_init(void)
{
- clkdm_init(clockdomains_omap44xx, NULL, &omap4_clkdm_operations);
+ clkdm_register_platform_funcs(&omap4_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap44xx);
+ clkdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 3f20cbb..110e5b9 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -45,17 +45,22 @@
static struct omap_globals omap242x_globals = {
.class = OMAP242X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x48014000),
- .sdrc = OMAP2420_SDRC_BASE,
- .sms = OMAP2420_SMS_BASE,
- .ctrl = OMAP242X_CTRL_BASE,
- .prm = OMAP2420_PRM_BASE,
- .cm = OMAP2420_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
};
void __init omap2_set_globals_242x(void)
{
__omap2_set_globals(&omap242x_globals);
}
+
+void __init omap242x_map_io(void)
+{
+ omap242x_map_common_io();
+}
#endif
#if defined(CONFIG_SOC_OMAP2430)
@@ -63,17 +68,22 @@
static struct omap_globals omap243x_globals = {
.class = OMAP243X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
- .sdrc = OMAP243X_SDRC_BASE,
- .sms = OMAP243X_SMS_BASE,
- .ctrl = OMAP243X_CTRL_BASE,
- .prm = OMAP2430_PRM_BASE,
- .cm = OMAP2430_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
};
void __init omap2_set_globals_243x(void)
{
__omap2_set_globals(&omap243x_globals);
}
+
+void __init omap243x_map_io(void)
+{
+ omap243x_map_common_io();
+}
#endif
#if defined(CONFIG_ARCH_OMAP3)
@@ -81,11 +91,11 @@
static struct omap_globals omap3_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
- .sdrc = OMAP343X_SDRC_BASE,
- .sms = OMAP343X_SMS_BASE,
- .ctrl = OMAP343X_CTRL_BASE,
- .prm = OMAP3430_PRM_BASE,
- .cm = OMAP3430_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
};
void __init omap2_set_globals_3xxx(void)
@@ -95,7 +105,6 @@
void __init omap3_map_io(void)
{
- omap2_set_globals_3xxx();
omap34xx_map_common_io();
}
@@ -110,9 +119,9 @@
static struct omap_globals ti816x_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
- .ctrl = TI816X_CTRL_BASE,
- .prm = TI816X_PRCM_BASE,
- .cm = TI816X_PRCM_BASE,
+ .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
};
void __init omap2_set_globals_ti816x(void)
@@ -125,11 +134,11 @@
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl = OMAP443X_SCM_BASE,
- .ctrl_pad = OMAP443X_CTRL_BASE,
- .prm = OMAP4430_PRM_BASE,
- .cm = OMAP4430_CM_BASE,
- .cm2 = OMAP4430_CM2_BASE,
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+ .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+ .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
};
void __init omap2_set_globals_443x(void)
@@ -138,5 +147,10 @@
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
}
+
+void __init omap4_map_io(void)
+{
+ omap44xx_map_common_io();
+}
#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index aab884f..e34d27f 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -149,17 +149,11 @@
void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->ctrl) {
- omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
- WARN_ON(!omap2_ctrl_base);
- }
+ if (omap2_globals->ctrl)
+ omap2_ctrl_base = omap2_globals->ctrl;
- /* Static mapping, never released */
- if (omap2_globals->ctrl_pad) {
- omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
- WARN_ON(!omap4_ctrl_pad_base);
- }
+ if (omap2_globals->ctrl_pad)
+ omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
}
void __iomem *omap_ctrl_base_get(void)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 1077ad6..68ec031 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -8,7 +8,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -26,7 +27,6 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mcbsp.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
@@ -44,7 +44,7 @@
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/*
@@ -61,12 +61,12 @@
if (!oh)
pr_err("could not look up %s\n", oh_name);
- od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
+ pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap3_l3_init);
@@ -74,9 +74,13 @@
{
int l, i;
struct omap_hwmod *oh[3];
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
/*
* To avoid code running on other OMAPs in
* multi-omap builds
@@ -92,12 +96,12 @@
pr_err("could not look up %s\n", oh_name);
}
- od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
+ pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
0, NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap4_l3_init);
@@ -221,18 +225,10 @@
#endif
}
-struct omap_device_pm_latency omap_keyboard_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
struct omap4_keypad_platform_data *keypad_data;
unsigned int id = -1;
@@ -247,15 +243,13 @@
keypad_data = sdp4430_keypad_data;
- od = omap_device_build(name, id, oh, keypad_data,
- sizeof(struct omap4_keypad_platform_data),
- omap_keyboard_latency,
- ARRAY_SIZE(omap_keyboard_latency), 0);
+ pdev = omap_device_build(name, id, oh, keypad_data,
+ sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
@@ -263,18 +257,10 @@
}
#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
- [0] = {
- .activate_func = omap_device_enable_hwmods,
- .deactivate_func = omap_device_idle_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline void omap_init_mbox(void)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
@@ -282,10 +268,9 @@
return;
}
- od = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
- mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
- WARN(IS_ERR(od), "%s: could not build device, err %ld\n",
- __func__, PTR_ERR(od));
+ pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
+ __func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
@@ -330,21 +315,45 @@
static inline void omap_init_audio(void) {}
#endif
+#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
+ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
+
+static struct omap_device_pm_latency omap_mcpdm_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+static void omap_init_mcpdm(void)
+{
+ struct omap_hwmod *oh;
+ struct omap_device *od;
+
+ oh = omap_hwmod_lookup("mcpdm");
+ if (!oh) {
+ printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+ return;
+ }
+
+ od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0,
+ omap_mcpdm_latency,
+ ARRAY_SIZE(omap_mcpdm_latency), 0);
+ if (IS_ERR(od))
+ printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n");
+}
+#else
+static inline void omap_init_mcpdm(void) {}
+#endif
+
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <plat/mcspi.h>
-struct omap_device_pm_latency omap_mcspi_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
char *name = "omap2_mcspi";
struct omap2_mcspi_platform_config *pdata;
static int spi_num;
@@ -371,10 +380,9 @@
}
spi_num++;
- od = omap_device_build(name, spi_num, oh, pdata,
- sizeof(*pdata), omap_mcspi_latency,
- ARRAY_SIZE(omap_mcspi_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
+ pdev = omap_device_build(name, spi_num, oh, pdata,
+ sizeof(*pdata), NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
@@ -683,6 +691,7 @@
* in alphabetical order so they're easier to sort through.
*/
omap_init_audio();
+ omap_init_mcpdm();
omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
@@ -698,18 +707,10 @@
arch_initcall(omap2_init_devices);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int __init omap_init_wdt(void)
{
int id = -1;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
@@ -723,10 +724,8 @@
return -EINVAL;
}
- od = omap_device_build(dev_name, id, oh, NULL, 0,
- omap_wdt_latency,
- ARRAY_SIZE(omap_wdt_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
+ pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a5b7a236..4036821 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -27,6 +27,8 @@
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
+#include "control.h"
+
static struct platform_device omap_display_device = {
.name = "omapdss",
.id = -1,
@@ -35,14 +37,6 @@
},
};
-static struct omap_device_pm_latency omap_dss_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -61,7 +55,7 @@
{ "dss_dispc", "omapdss_dispc", -1 },
{ "dss_rfbi", "omapdss_rfbi", -1 },
{ "dss_venc", "omapdss_venc", -1 },
- { "dss_dsi1", "omapdss_dsi1", -1 },
+ { "dss_dsi1", "omapdss_dsi", 0 },
};
static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
@@ -69,16 +63,63 @@
{ "dss_dispc", "omapdss_dispc", -1 },
{ "dss_rfbi", "omapdss_rfbi", -1 },
{ "dss_venc", "omapdss_venc", -1 },
- { "dss_dsi1", "omapdss_dsi1", -1 },
- { "dss_dsi2", "omapdss_dsi2", -1 },
+ { "dss_dsi1", "omapdss_dsi", 0 },
+ { "dss_dsi2", "omapdss_dsi", 1 },
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
+static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+{
+ u32 enable_mask, enable_shift;
+ u32 pipd_mask, pipd_shift;
+ u32 reg;
+
+ if (dsi_id == 0) {
+ enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
+ enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
+ pipd_mask = OMAP4_DSI1_PIPD_MASK;
+ pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
+ } else if (dsi_id == 1) {
+ enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
+ enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
+ pipd_mask = OMAP4_DSI2_PIPD_MASK;
+ pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
+ } else {
+ return -ENODEV;
+ }
+
+ reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+ reg &= ~enable_mask;
+ reg &= ~pipd_mask;
+
+ reg |= (lanes << enable_shift) & enable_mask;
+ reg |= (lanes << pipd_shift) & pipd_mask;
+
+ omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+ return 0;
+}
+
+static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
+{
+ if (cpu_is_omap44xx())
+ return omap4_dsi_mux_pads(dsi_id, lane_mask);
+
+ return 0;
+}
+
+static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
+{
+ if (cpu_is_omap44xx())
+ omap4_dsi_mux_pads(dsi_id, 0);
+}
+
int __init omap_display_init(struct omap_dss_board_info *board_data)
{
int r = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
int i, oh_count;
struct omap_display_platform_data pdata;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
@@ -96,6 +137,11 @@
oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
}
+ if (board_data->dsi_enable_pads == NULL)
+ board_data->dsi_enable_pads = omap_dsi_enable_pads;
+ if (board_data->dsi_disable_pads == NULL)
+ board_data->dsi_disable_pads = omap_dsi_disable_pads;
+
pdata.board_data = board_data;
pdata.board_data->get_context_loss_count =
omap_pm_get_dev_context_loss_count;
@@ -108,13 +154,12 @@
return -ENODEV;
}
- od = omap_device_build(curr_dss_hwmod[i].dev_name,
+ pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id, oh, &pdata,
sizeof(struct omap_display_platform_data),
- omap_dss_latency,
- ARRAY_SIZE(omap_dss_latency), 0);
+ NULL, 0, 0);
- if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+ if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name))
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index c9ff0e7..a59a45a 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -87,14 +87,6 @@
[CCDN] = 0xd8,
};
-static struct omap_device_pm_latency omap2_dma_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
@@ -228,7 +220,7 @@
/* One time initializations */
static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_system_dma_plat_info *p;
struct resource *mem;
char *name = "omap_dma_system";
@@ -258,23 +250,22 @@
p->errata = configure_dma_errata();
- od = omap_device_build(name, 0, oh, p, sizeof(*p),
- omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+ pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
kfree(p);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
- dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+ dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
return -EINVAL;
}
dma_base = ioremap(mem->start, resource_size(mem));
if (!dma_base) {
- dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+ dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
return -ENOMEM;
}
@@ -283,7 +274,7 @@
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
- dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+ dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
return -ENOMEM;
}
return 0;
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2765cdc..8cbfbc2 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,17 +24,9 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-static struct omap_device_pm_latency omap_gpio_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_gpio_platform_data *pdata;
struct omap_gpio_dev_attr *dev_attr;
char *name = "omap_gpio";
@@ -107,19 +99,17 @@
return -EINVAL;
}
- od = omap_device_build(name, id - 1, oh, pdata,
- sizeof(*pdata), omap_gpio_latency,
- ARRAY_SIZE(omap_gpio_latency),
- false);
+ pdev = omap_device_build(name, id - 1, oh, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
gpio_bank_count++;
return 0;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 097a42d..7708584 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -409,31 +409,17 @@
return 0;
}
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
- /*
- * XXX There should also be an entry here to power off/on the
- * MMC regulators/PBIAS cells, etc.
- */
-};
-
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
- struct omap_device *od;
- struct omap_device_pm_latency *ohl;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
int l;
- int ohl_cnt = 0;
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc_data) {
@@ -448,8 +434,6 @@
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
- ohl = omap_hsmmc_latency;
- ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
@@ -467,9 +451,9 @@
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
+ sizeof(struct omap_mmc_platform_data), NULL, 0, false);
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
goto done;
@@ -478,7 +462,7 @@
* return device handle to board setup code
* required to populate for regulator framework structure
*/
- hsmmcinfo->dev = &od->pdev.dev;
+ hsmmcinfo->dev = &pdev->dev;
done:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 06d4a80..454dfce 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -19,23 +19,20 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/hwspinlock.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-struct omap_device_pm_latency omap_spinlock_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- }
+static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
+ .base_id = 0,
};
int __init hwspinlocks_init(void)
{
int retval = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
const char *oh_name = "spinlock";
const char *dev_name = "omap_hwspinlock";
@@ -48,13 +45,13 @@
if (oh == NULL)
return -EINVAL;
- od = omap_device_build(dev_name, 0, oh, NULL, 0,
- omap_spinlock_latency,
- ARRAY_SIZE(omap_spinlock_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata,
+ sizeof(struct hwspinlock_pdata),
+ NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Can't build omap_device for %s:%s\n", dev_name,
oh_name);
- retval = PTR_ERR(od);
+ retval = PTR_ERR(pdev);
}
return retval;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37efb86..d27daf9 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -28,7 +28,6 @@
#include "control.h"
-static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
u32 omap_features;
@@ -39,19 +38,6 @@
}
EXPORT_SYMBOL(omap_rev);
-/**
- * omap_chip_is - test whether currently running OMAP matches a chip type
- * @oc: omap_chip_t to test against
- *
- * Test whether the currently-running OMAP chip matches the supplied
- * chip type 'oc'. Returns 1 upon a match; 0 upon failure.
- */
-int omap_chip_is(struct omap_chip_id oci)
-{
- return (oci.oc & omap_chip.oc) ? 1 : 0;
-}
-EXPORT_SYMBOL(omap_chip_is);
-
int omap_type(void)
{
u32 val = 0;
@@ -242,14 +228,12 @@
omap_features = OMAP3_HAS_NEON;
}
-static void __init omap3_check_revision(void)
+static void __init omap3_check_revision(const char **cpu_rev)
{
u32 cpuid, idcode;
u16 hawkeye;
u8 rev;
- omap_chip.oc = CHIP_IS_OMAP3430;
-
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@@ -258,7 +242,7 @@
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+ *cpu_rev = "1.0";
return;
}
@@ -279,77 +263,85 @@
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.0";
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.1";
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ *cpu_rev = "3.0";
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1";
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1_2;
-
- /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1.2";
}
break;
case 0xb868:
- /* Handle OMAP35xx/AM35xx devices
+ /*
+ * Handle OMAP/AM 3505/3517 devices
*
- * Set the device to be OMAP3505 here. Actual device
+ * Set the device to be OMAP3517 here. Actual device
* is identified later based on the features.
- *
- * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
- omap_revision = OMAP3505_REV(rev);
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP3517_REV_ES1_0;
+ *cpu_rev = "1.0";
+ break;
+ case 1:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = OMAP3517_REV_ES1_1;
+ *cpu_rev = "1.1";
+ }
break;
case 0xb891:
/* Handle 36xx devices */
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
switch(rev) {
case 0: /* Take care of early samples */
omap_revision = OMAP3630_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
omap_revision = OMAP3630_REV_ES1_1;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+ *cpu_rev = "1.1";
break;
case 2:
+ /* FALLTHROUGH */
default:
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
}
break;
case 0xb81e:
- omap_chip.oc = CHIP_IS_TI816X;
-
switch (rev) {
case 0:
omap_revision = TI8168_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
- omap_revision = TI8168_REV_ES1_1;
- break;
+ /* FALLTHROUGH */
default:
- omap_revision = TI8168_REV_ES1_1;
+ omap_revision = TI8168_REV_ES1_1;
+ *cpu_rev = "1.1";
+ break;
}
break;
default:
- /* Unknown default to latest silicon rev as default*/
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ /* Unknown default to latest silicon rev as default */
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
+ pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
}
}
@@ -382,24 +374,20 @@
switch (rev) {
case 0:
omap_revision = OMAP4430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES1;
break;
case 1:
default:
omap_revision = OMAP4430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2;
}
break;
case 0xb95c:
switch (rev) {
case 3:
omap_revision = OMAP4430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_1;
break;
case 4:
default:
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
break;
case 0xb94e:
@@ -407,14 +395,12 @@
case 0:
default:
omap_revision = OMAP4460_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4460ES1_0;
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@@ -425,94 +411,33 @@
if (omap3_has_ ##feat()) \
printk(#feat" ");
-static void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(const char *cpu_rev)
{
- u8 rev = GET_OMAP_REVISION();
- char cpu_name[16], cpu_rev[16];
+ const char *cpu_name;
- /* OMAP3430 and OMAP3530 are assumed to be same.
+ /*
+ * OMAP3430 and OMAP3530 are assumed to be same.
*
* OMAP3525, OMAP3515 and OMAP3503 can be detected only based
* on available features. Upon detection, update the CPU id
* and CPU class bits.
*/
if (cpu_is_omap3630()) {
- strcpy(cpu_name, "OMAP3630");
- } else if (cpu_is_omap3505()) {
- /*
- * AM35xx devices
- */
- if (omap3_has_sgx()) {
- omap_revision = OMAP3517_REV(rev);
- strcpy(cpu_name, "AM3517");
- } else {
- /* Already set in omap3_check_revision() */
- strcpy(cpu_name, "AM3505");
- }
+ cpu_name = "OMAP3630";
+ } else if (cpu_is_omap3517()) {
+ /* AM35xx devices */
+ cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
- strcpy(cpu_name, "TI816X");
+ cpu_name = "TI816X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
- strcpy(cpu_name, "OMAP3430/3530");
+ cpu_name = "OMAP3430/3530";
} else if (omap3_has_iva()) {
- omap_revision = OMAP3525_REV(rev);
- strcpy(cpu_name, "OMAP3525");
+ cpu_name = "OMAP3525";
} else if (omap3_has_sgx()) {
- omap_revision = OMAP3515_REV(rev);
- strcpy(cpu_name, "OMAP3515");
+ cpu_name = "OMAP3515";
} else {
- omap_revision = OMAP3503_REV(rev);
- strcpy(cpu_name, "OMAP3503");
- }
-
- if (cpu_is_omap3630() || cpu_is_ti816x()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "1.1");
- break;
- case OMAP_REVBITS_02:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.2");
- }
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.1");
- }
- } else {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "2.0");
- break;
- case OMAP_REVBITS_02:
- strcpy(cpu_rev, "2.1");
- break;
- case OMAP_REVBITS_03:
- strcpy(cpu_rev, "3.0");
- break;
- case OMAP_REVBITS_04:
- strcpy(cpu_rev, "3.1");
- break;
- case OMAP_REVBITS_05:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "3.1.2");
- }
+ cpu_name = "OMAP3503";
}
/* Print verbose information */
@@ -533,6 +458,8 @@
*/
void __init omap2_check_revision(void)
{
+ const char *cpu_rev;
+
/*
* At this point we have an idea about the processor revision set
* earlier with omap2_set_globals_tap().
@@ -540,7 +467,7 @@
if (cpu_is_omap24xx()) {
omap24xx_check_revision();
} else if (cpu_is_omap34xx()) {
- omap3_check_revision();
+ omap3_check_revision(&cpu_rev);
/* TI816X doesn't have feature register */
if (!cpu_is_ti816x())
@@ -548,7 +475,7 @@
else
ti816x_check_features();
- omap3_cpuinfo();
+ omap3_cpuinfo(cpu_rev);
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
@@ -557,22 +484,6 @@
} else {
pr_err("OMAP revision unknown, please fix!\n");
}
-
- /*
- * OK, now we know the exact revision. Initialize omap_chip bits
- * for powerdowmain and clockdomain code.
- */
- if (cpu_is_omap243x()) {
- /* Currently only supports 2430ES2.1 and 2430-all */
- omap_chip.oc |= CHIP_IS_OMAP2430;
- return;
- } else if (cpu_is_omap242x()) {
- /* Currently only supports 2420ES2.1.1 and 2420-all */
- omap_chip.oc |= CHIP_IS_OMAP2420;
- return;
- }
-
- pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 48adfe9..13f98e5 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,15 +13,10 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <plat/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
-#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
@@ -34,26 +29,25 @@
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */
-10: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rp, =omap_uart_phys @ MMU enabled
- add \rv, \rp, #4 @ omap_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+10: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ omap_uart_phys
+ ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
- ldr \rp, [\rp, #0]
+ mov \rp, pc
+ ldr \rv, =OMAP_UART_INFO_OFS
+ and \rp, \rp, #0xff000000
+ ldr \rp, [\rp, \rv]
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rp, #0 @ no port configured?
@@ -106,50 +100,47 @@
b 98f
83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE)
b 98f
+
95: ldr \rp, =ZOOM_UART_BASE
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
ldr \rp, =ZOOM_UART_VIRT
- add \rv, \rv, #4 @ omap_uart_virt
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0x48000000 @ phys base
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base
- add \rv, \rv, #4 @ omap_uart_virt
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
-99:
+
+ .align
+99: .word .
+ .word omap_uart_phys
+ .ltorg
+
+100: /* Pass the UART_LSR reg address */
+ ldr \tmp, [\tmp, #8] @ omap_uart_lsr
+ add \rp, \rp, \tmp
+ add \rv, \rv, \tmp
.endm
.macro senduart,rd,rx
- strb \rd, [\rx]
+ orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset
+ bic \rx, \rx, #0xff @ get base (THR) reg address
+ strb \rd, [\rx] @ send lower byte of rd
+ orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR)
+ bic \rd, \rd, #(0xff << 24) @ restore original rd
.endm
.macro busyuart,rd,rx
-1001: mrc p15, 0, \rd, c1, c0
- tst \rd, #1 @ MMU enabled?
- ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled
- ldrne \rd, =omap_uart_lsr @ MMU enabled
- ldr \rd, [\rd, #0]
- ldrb \rd, [\rx, \rd]
+1001: ldrb \rd, [\rx] @ rx contains UART_LSR address
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index ceb8b7e..feb90a1 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -78,7 +78,7 @@
4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -101,18 +101,6 @@
it cs
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- itt eq
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
#endif /* CONFIG_SMP */
#else /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
deleted file mode 100644
index ca6d32a..0000000
--- a/arch/arm/mach-omap2/include/mach/memory.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/memory.h
- */
-
-#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2ce1ce6..a5d8dce 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -16,7 +16,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -35,14 +34,16 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
-#include "io.h"
+#include <plat/common.h>
#include <plat/omap-pm.h>
+#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
+#include <plat/common.h>
/*
* The machine specific code may provide the extra mapping besides the
@@ -239,25 +240,11 @@
};
#endif
-static void __init _omap2_map_common_io(void)
-{
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- omap2_check_revision();
- omap_sram_init();
-}
-
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -266,7 +253,6 @@
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -274,7 +260,6 @@
void __init omap34xx_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -282,7 +267,6 @@
void __init omapti816x_map_common_io(void)
{
iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -290,7 +274,6 @@
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -336,30 +319,17 @@
/* See irq.c, omap4-common.c and entry-macro.S */
void __iomem *omap_irq_base;
-void __init omap2_init_common_infrastructure(void)
+static void __init omap_common_init_early(void)
+{
+ omap2_check_revision();
+ omap_ioremap_init();
+ omap_init_consistent_dma_size();
+}
+
+static void __init omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
- if (cpu_is_omap242x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
- omap2420_hwmod_init();
- } else if (cpu_is_omap243x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
- omap2430_hwmod_init();
- } else if (cpu_is_omap34xx()) {
- omap3xxx_powerdomains_init();
- omap3xxx_clockdomains_init();
- omap3xxx_hwmod_init();
- } else if (cpu_is_omap44xx()) {
- omap44xx_powerdomains_init();
- omap44xx_clockdomains_init();
- omap44xx_hwmod_init();
- } else {
- pr_err("Could not init hwmod data - unknown SoC\n");
- }
-
/* Set the default postsetup state for all hwmods */
#ifdef CONFIG_PM_RUNTIME
postsetup_state = _HWMOD_STATE_IDLE;
@@ -376,7 +346,7 @@
* omap_hwmod_late_init(), so boards that desire full watchdog
* coverage of kernel initialization can reprogram the
* postsetup_state between the calls to
- * omap2_init_common_infra() and omap2_init_common_devices().
+ * omap2_init_common_infra() and omap_sdrc_init().
*
* XXX ideally we could detect whether the MPU WDT was currently
* enabled here and make this conditional
@@ -387,27 +357,101 @@
&postsetup_state);
omap_pm_if_early_init();
-
- if (cpu_is_omap2420())
- omap2420_clk_init();
- else if (cpu_is_omap2430())
- omap2430_clk_init();
- else if (cpu_is_omap34xx())
- omap3xxx_clk_init();
- else if (cpu_is_omap44xx())
- omap4xxx_clk_init();
- else
- pr_err("Could not init clock framework - unknown SoC\n");
}
-void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+void __init omap2420_init_early(void)
+{
+ omap2_set_globals_242x();
+ omap_common_init_early();
+ omap2xxx_voltagedomains_init();
+ omap242x_powerdomains_init();
+ omap242x_clockdomains_init();
+ omap2420_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap2420_clk_init();
+}
+
+void __init omap2430_init_early(void)
+{
+ omap2_set_globals_243x();
+ omap_common_init_early();
+ omap2xxx_voltagedomains_init();
+ omap243x_powerdomains_init();
+ omap243x_clockdomains_init();
+ omap2430_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap2430_clk_init();
+}
+
+/*
+ * Currently only board-omap3beagle.c should call this because of the
+ * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
+ */
+void __init omap3_init_early(void)
+{
+ omap2_set_globals_3xxx();
+ omap_common_init_early();
+ omap3xxx_voltagedomains_init();
+ omap3xxx_powerdomains_init();
+ omap3xxx_clockdomains_init();
+ omap3xxx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap3xxx_clk_init();
+}
+
+void __init omap3430_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init omap35xx_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init omap3630_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init am35xx_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init ti816x_init_early(void)
+{
+ omap2_set_globals_ti816x();
+ omap_common_init_early();
+ omap3xxx_voltagedomains_init();
+ omap3xxx_powerdomains_init();
+ omap3xxx_clockdomains_init();
+ omap3xxx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap3xxx_clk_init();
+}
+
+void __init omap4430_init_early(void)
+{
+ omap2_set_globals_443x();
+ omap_common_init_early();
+ omap44xx_voltagedomains_init();
+ omap44xx_powerdomains_init();
+ omap44xx_clockdomains_init();
+ omap44xx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap4xxx_clk_init();
+}
+
+void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
+ omap_sram_init();
+
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
-
}
/*
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
index fd230c6..e69de29 100644
--- a/arch/arm/mach-omap2/io.h
+++ b/arch/arm/mach-omap2/io.h
@@ -1,7 +0,0 @@
-
-#ifndef __MACH_OMAP2_IO_H__
-#define __MACH_OMAP2_IO_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __MACH_OMAP2_IO_H__ */
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index f286012..eefc379 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -66,7 +66,7 @@
((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
-static void __iommu_set_twl(struct iommu *obj, bool on)
+static void __iommu_set_twl(struct omap_iommu *obj, bool on)
{
u32 l = iommu_read_reg(obj, MMU_CNTL);
@@ -85,7 +85,7 @@
}
-static int omap2_iommu_enable(struct iommu *obj)
+static int omap2_iommu_enable(struct omap_iommu *obj)
{
u32 l, pa;
unsigned long timeout;
@@ -127,7 +127,7 @@
return 0;
}
-static void omap2_iommu_disable(struct iommu *obj)
+static void omap2_iommu_disable(struct omap_iommu *obj)
{
u32 l = iommu_read_reg(obj, MMU_CNTL);
@@ -138,12 +138,12 @@
dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
}
-static void omap2_iommu_set_twl(struct iommu *obj, bool on)
+static void omap2_iommu_set_twl(struct omap_iommu *obj, bool on)
{
__iommu_set_twl(obj, false);
}
-static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+static u32 omap2_iommu_fault_isr(struct omap_iommu *obj, u32 *ra)
{
u32 stat, da;
u32 errs = 0;
@@ -173,13 +173,13 @@
return errs;
}
-static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+static void omap2_tlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr)
{
cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
}
-static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+static void omap2_tlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr)
{
iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
iommu_write_reg(obj, cr->ram, MMU_RAM);
@@ -193,7 +193,8 @@
return cr->cam & mask;
}
-static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+static struct cr_regs *omap2_alloc_cr(struct omap_iommu *obj,
+ struct iotlb_entry *e)
{
struct cr_regs *cr;
@@ -230,7 +231,8 @@
return attr;
}
-static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+static ssize_t
+omap2_dump_cr(struct omap_iommu *obj, struct cr_regs *cr, char *buf)
{
char *p = buf;
@@ -254,7 +256,8 @@
goto out; \
} while (0)
-static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
+static ssize_t
+omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len)
{
char *p = buf;
@@ -280,7 +283,7 @@
return p - buf;
}
-static void omap2_iommu_save_ctx(struct iommu *obj)
+static void omap2_iommu_save_ctx(struct omap_iommu *obj)
{
int i;
u32 *p = obj->ctx;
@@ -293,7 +296,7 @@
BUG_ON(p[0] != IOMMU_ARCH_VERSION);
}
-static void omap2_iommu_restore_ctx(struct iommu *obj)
+static void omap2_iommu_restore_ctx(struct omap_iommu *obj)
{
int i;
u32 *p = obj->ctx;
@@ -343,13 +346,13 @@
static int __init omap2_iommu_init(void)
{
- return install_iommu_arch(&omap2_iommu_ops);
+ return omap_install_iommu_arch(&omap2_iommu_ops);
}
module_init(omap2_iommu_init);
static void __exit omap2_iommu_exit(void)
{
- uninstall_iommu_arch(&omap2_iommu_ops);
+ omap_uninstall_iommu_arch(&omap2_iommu_ops);
}
module_exit(omap2_iommu_exit);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3a12f75..65f1be6 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -165,8 +165,8 @@
omap_irq_bank_init_one(bank);
- for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20)
- omap_alloc_gc(bank->base_reg + j, i, 32);
+ for (j = 0; j < bank->nr_irqs; j += 32)
+ omap_alloc_gc(bank->base_reg + j, j, 32);
nr_of_irqs += bank->nr_irqs;
nr_banks++;
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 4a6ef6a..292eee3 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -27,66 +27,69 @@
#include "control.h"
-/* McBSP internal signal muxing functions */
+/*
+ * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
+ * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
+ */
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
-void omap2_mcbsp1_mux_clkr_src(u8 mux)
+/* McBSP internal signal muxing function */
+static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
+ const char *src)
{
u32 v;
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == CLKR_SRC_CLKR)
- v &= ~OMAP2_MCBSP1_CLKR_MASK;
- else if (mux == CLKR_SRC_CLKX)
- v |= OMAP2_MCBSP1_CLKR_MASK;
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
-void omap2_mcbsp1_mux_fsr_src(u8 mux)
-{
- u32 v;
+ if (!strcmp(signal, "clkr")) {
+ if (!strcmp(src, "clkr"))
+ v &= ~OMAP2_MCBSP1_CLKR_MASK;
+ else if (!strcmp(src, "clkx"))
+ v |= OMAP2_MCBSP1_CLKR_MASK;
+ else
+ return -EINVAL;
+ } else if (!strcmp(signal, "fsr")) {
+ if (!strcmp(src, "fsr"))
+ v &= ~OMAP2_MCBSP1_FSR_MASK;
+ else if (!strcmp(src, "fsx"))
+ v |= OMAP2_MCBSP1_FSR_MASK;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
- v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == FSR_SRC_FSR)
- v &= ~OMAP2_MCBSP1_FSR_MASK;
- else if (mux == FSR_SRC_FSX)
- v |= OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+
+ return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
/* McBSP CLKS source switching function */
-
-int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
+ const char *src)
{
- struct omap_mcbsp *mcbsp;
struct clk *fck_src;
char *fck_src_name;
int r;
- if (!omap_mcbsp_check_valid_id(id)) {
- pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
- return -EINVAL;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ if (!strcmp(src, "clks_ext"))
fck_src_name = "pad_fck";
- else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ else if (!strcmp(src, "clks_fclk"))
fck_src_name = "prcm_fck";
else
return -EINVAL;
- fck_src = clk_get(mcbsp->dev, fck_src_name);
+ fck_src = clk_get(dev, fck_src_name);
if (IS_ERR_OR_NULL(fck_src)) {
pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
fck_src_name);
return -EINVAL;
}
- pm_runtime_put_sync(mcbsp->dev);
+ pm_runtime_put_sync(dev);
- r = clk_set_parent(mcbsp->fclk, fck_src);
+ r = clk_set_parent(clk, fck_src);
if (IS_ERR_VALUE(r)) {
pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
"clks", fck_src_name);
@@ -94,21 +97,30 @@
return -EINVAL;
}
- pm_runtime_get_sync(mcbsp->dev);
+ pm_runtime_get_sync(dev);
clk_put(fck_src);
return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
+static int omap3_enable_st_clock(unsigned int id, bool enable)
+{
+ unsigned int w;
+
+ /*
+ * Sidetone uses McBSP ICLK - which must not idle when sidetones
+ * are enabled or sidetones start sounding ugly.
+ */
+ w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (enable)
+ w &= ~(1 << (id - 2));
+ else
+ w |= 1 << (id - 2);
+ omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+ return 0;
+}
static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
{
@@ -116,7 +128,7 @@
char *name = "omap-mcbsp";
struct omap_hwmod *oh_device[2];
struct omap_mcbsp_platform_data *pdata = NULL;
- struct omap_device *od;
+ struct platform_device *pdev;
sscanf(oh->name, "mcbsp%d", &id);
@@ -126,7 +138,13 @@
return -ENOMEM;
}
- pdata->mcbsp_config_type = oh->class->rev;
+ pdata->reg_step = 4;
+ if (oh->class->rev < MCBSP_CONFIG_TYPE2) {
+ pdata->reg_size = 2;
+ } else {
+ pdata->reg_size = 4;
+ pdata->has_ccr = true;
+ }
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -137,22 +155,28 @@
pdata->buffer_size = 0x80;
}
+ if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
+ pdata->has_wakeup = true;
+
oh_device[0] = oh;
if (oh->dev_attr) {
oh_device[1] = omap_hwmod_lookup((
(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
+ pdata->enable_st_clock = omap3_enable_st_clock;
count++;
}
- od = omap_device_build_ss(name, id, oh_device, count, pdata,
- sizeof(*pdata), omap2_mcbsp_latency,
- ARRAY_SIZE(omap2_mcbsp_latency), false);
+ pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 889464d..4412ddb 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -102,8 +102,11 @@
{
unsigned int i, ncores;
- /* Never released */
- scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
+ /*
+ * Currently we can't call ioremap here because
+ * SoC detection won't work until after init_early.
+ */
+ scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
BUG_ON(!scu_base);
ncores = scu_get_core_count(scu_base);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 84cc0bd..d713807 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1954,9 +1954,6 @@
i = 0;
do {
- if (!omap_chip_is(ohs[i]->omap_chip))
- continue;
-
r = _register(ohs[i]);
WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
r);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a015c69..6d72062 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -100,7 +100,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters),
.slaves = omap2420_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -206,7 +205,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -227,7 +225,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -243,7 +240,6 @@
.main_clk = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -271,7 +267,16 @@
.class = &iva_hwmod_class,
.masters = omap2420_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2420_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -314,10 +319,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer2 */
@@ -351,10 +356,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer3 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer4 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer5 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
@@ -500,10 +505,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer7 */
@@ -537,10 +542,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer8 */
@@ -574,10 +579,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer9 */
@@ -611,10 +616,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer10 */
@@ -648,10 +653,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer11 */
@@ -685,10 +690,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer12 */
@@ -722,10 +727,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* l4_wkup -> wd_timer2 */
@@ -766,7 +771,6 @@
},
.slaves = omap2420_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART1 */
@@ -792,7 +796,6 @@
.slaves = omap2420_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART2 */
@@ -818,7 +821,6 @@
.slaves = omap2420_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART3 */
@@ -844,7 +846,6 @@
.slaves = omap2420_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dss */
@@ -898,7 +899,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -938,7 +938,6 @@
},
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -975,7 +974,6 @@
},
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1013,7 +1011,6 @@
},
.slaves = omap2420_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1064,7 +1061,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1092,7 +1088,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1197,7 +1192,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio2 */
@@ -1223,7 +1217,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio3 */
@@ -1249,7 +1242,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio4 */
@@ -1275,7 +1267,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dma attributes */
@@ -1322,7 +1313,6 @@
.masters = omap2420_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1363,7 +1353,6 @@
},
.slaves = omap2420_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi1 */
@@ -1393,7 +1382,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi2 */
@@ -1423,7 +1411,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -1473,7 +1460,6 @@
},
.slaves = omap2420_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcbsp2 */
@@ -1514,7 +1500,6 @@
},
.slaves = omap2420_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 408193d..a2580d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -110,7 +110,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters),
.slaves = omap2430_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -250,7 +249,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -301,7 +299,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -317,7 +314,6 @@
.main_clk = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -345,7 +341,16 @@
.class = &iva_hwmod_class,
.masters = omap2430_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2430_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer2 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer3 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer4 */
@@ -499,10 +504,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer5 */
@@ -536,10 +541,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer6 */
@@ -573,10 +578,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer7 */
@@ -610,10 +615,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer8 */
@@ -647,10 +652,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer9 */
@@ -684,10 +689,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer10 */
@@ -721,10 +726,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer11 */
@@ -758,10 +763,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer12 */
@@ -795,10 +800,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* l4_wkup -> wd_timer2 */
@@ -839,7 +844,6 @@
},
.slaves = omap2430_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART1 */
@@ -865,7 +869,6 @@
.slaves = omap2430_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART2 */
@@ -891,7 +894,6 @@
.slaves = omap2430_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART3 */
@@ -917,7 +919,6 @@
.slaves = omap2430_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dss */
@@ -965,7 +966,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -999,7 +999,6 @@
},
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1030,7 +1029,6 @@
},
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1062,7 +1060,6 @@
},
.slaves = omap2430_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1123,7 +1120,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* I2C2 */
@@ -1151,7 +1147,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* l4_wkup -> gpio1 */
@@ -1273,7 +1268,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio2 */
@@ -1299,7 +1293,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio3 */
@@ -1325,7 +1318,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio4 */
@@ -1351,7 +1343,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio5 */
@@ -1382,7 +1373,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dma attributes */
@@ -1429,7 +1419,6 @@
.masters = omap2430_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1469,7 +1458,6 @@
},
.slaves = omap2430_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi1 */
@@ -1499,7 +1487,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi2 */
@@ -1529,7 +1516,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi3 */
@@ -1572,7 +1558,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -1628,7 +1613,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/*
@@ -1689,7 +1673,6 @@
},
.slaves = omap2430_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp2 */
@@ -1731,7 +1714,6 @@
},
.slaves = omap2430_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp3 */
@@ -1783,7 +1765,6 @@
},
.slaves = omap2430_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp4 */
@@ -1841,7 +1822,6 @@
},
.slaves = omap2430_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp5 */
@@ -1899,7 +1879,6 @@
},
.slaves = omap2430_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO common */
@@ -1966,7 +1945,6 @@
.slaves = omap2430_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO2 */
@@ -2010,7 +1988,6 @@
.slaves = omap2430_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 25bf43b..3008e16 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -156,7 +156,6 @@
.masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters),
.slaves = omap3xxx_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -459,7 +458,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -474,7 +472,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -489,7 +486,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -505,7 +501,6 @@
.main_clk = "arm_fck",
.masters = omap3xxx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -533,7 +528,6 @@
.class = &iva_hwmod_class,
.masters = omap3xxx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer class */
@@ -570,6 +564,21 @@
.rev = OMAP_TIMER_IP_VERSION_1,
};
+/* secure timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
+ .timer_capability = OMAP_TIMER_SECURE,
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap3xxx_timer1_hwmod;
@@ -610,10 +619,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer2 */
@@ -656,10 +665,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer3 */
@@ -702,10 +711,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer4 */
@@ -748,10 +757,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer5 */
@@ -794,10 +803,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer6 */
@@ -840,10 +849,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer7 */
@@ -886,10 +895,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer8 */
@@ -932,10 +941,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer9 */
@@ -978,10 +987,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer10 */
@@ -1015,10 +1024,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer11 */
@@ -1052,10 +1061,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer12*/
@@ -1102,10 +1111,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_secure_dev_attr,
.slaves = omap3xxx_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* l4_wkup -> wd_timer2 */
@@ -1182,7 +1191,6 @@
},
.slaves = omap3xxx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
/*
* XXX: Use software supervised mode, HW supervised smartidle seems to
* block CORE power domain idle transitions. Maybe a HW bug in wdt2?
@@ -1213,7 +1221,6 @@
.slaves = omap3xxx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART2 */
@@ -1239,7 +1246,6 @@
.slaves = omap3xxx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART3 */
@@ -1265,7 +1271,6 @@
.slaves = omap3xxx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART4 */
@@ -1302,7 +1307,6 @@
.slaves = omap3xxx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
static struct omap_hwmod_class i2c_class = {
@@ -1390,7 +1394,6 @@
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1415,8 +1418,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 |
- CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1),
};
/* l4_core -> dss_dispc */
@@ -1454,9 +1455,6 @@
},
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1518,9 +1516,6 @@
},
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1558,9 +1553,6 @@
},
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1599,9 +1591,6 @@
},
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1637,7 +1626,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C2 */
@@ -1672,7 +1660,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C3 */
@@ -1718,7 +1705,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
.class = &i2c_class,
.dev_attr = &i2c3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4_wkup -> gpio1 */
@@ -1880,7 +1866,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio2 */
@@ -1912,7 +1897,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio3 */
@@ -1944,7 +1928,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio4 */
@@ -1976,7 +1959,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio5 */
@@ -2013,7 +1995,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio6 */
@@ -2050,7 +2031,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* dma_system -> L3 */
@@ -2134,7 +2114,6 @@
.masters = omap3xxx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -2207,7 +2186,6 @@
},
.slaves = omap3xxx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp2 */
@@ -2264,7 +2242,6 @@
.slaves = omap3xxx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
.dev_attr = &omap34xx_mcbsp2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3 */
@@ -2321,7 +2298,6 @@
.slaves = omap3xxx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
.dev_attr = &omap34xx_mcbsp3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp4 */
@@ -2379,7 +2355,6 @@
},
.slaves = omap3xxx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp5 */
@@ -2437,7 +2412,6 @@
},
.slaves = omap3xxx_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* 'mcbsp sidetone' class */
@@ -2498,7 +2472,6 @@
},
.slaves = omap3xxx_mcbsp2_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3_sidetone */
@@ -2547,7 +2520,6 @@
},
.slaves = omap3xxx_mcbsp3_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -2597,7 +2569,7 @@
.name = "sr1_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2609,9 +2581,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2619,7 +2588,7 @@
.name = "sr1_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2631,7 +2600,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/* SR2 */
@@ -2655,9 +2623,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2677,7 +2642,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/*
@@ -2745,7 +2709,6 @@
},
.slaves = omap3xxx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4 core -> mcspi1 interface */
@@ -2843,7 +2806,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi2 */
@@ -2873,7 +2835,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi3 */
@@ -2916,7 +2877,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* SPI4 */
@@ -2957,7 +2917,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi4_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -3014,7 +2973,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* usb_otg_hs */
@@ -3042,7 +3000,6 @@
.slaves = am35xx_usbhsotg_slaves,
.slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves),
.class = &am35xx_usbotg_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1)
};
/* MMC/SD/SDIO common */
@@ -3108,7 +3065,6 @@
.slaves = omap3xxx_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO2 */
@@ -3151,7 +3107,6 @@
.slaves = omap3xxx_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO3 */
@@ -3193,7 +3148,6 @@
.slaves = omap3xxx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
@@ -3224,10 +3178,7 @@
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- &omap3xxx_uart4_hwmod,
/* dss class */
- &omap3430es1_dss_core_hwmod,
- &omap3xxx_dss_core_hwmod,
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
&omap3xxx_dss_rfbi_hwmod,
@@ -3239,9 +3190,6 @@
&omap3xxx_i2c3_hwmod,
&omap34xx_sr1_hwmod,
&omap34xx_sr2_hwmod,
- &omap36xx_sr1_hwmod,
- &omap36xx_sr2_hwmod,
-
/* gpio class */
&omap3xxx_gpio1_hwmod,
@@ -3272,16 +3220,96 @@
&omap34xx_mcspi3,
&omap34xx_mcspi4,
- /* usbotg class */
- &omap3xxx_usbhsotg_hwmod,
-
- /* usbotg for am35x */
- &am35xx_usbhsotg_hwmod,
-
NULL,
};
+/* 3430ES1-only hwmods */
+static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+ &omap3430es1_dss_core_hwmod,
+ NULL
+};
+
+/* 3430ES2+-only hwmods */
+static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+ &omap3xxx_dss_core_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+/* 34xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+ &omap34xx_sr1_hwmod,
+ &omap34xx_sr2_hwmod,
+ NULL
+};
+
+/* 36xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+ &omap3xxx_uart4_hwmod,
+ &omap3xxx_dss_core_hwmod,
+ &omap36xx_sr1_hwmod,
+ &omap36xx_sr2_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+static __initdata struct omap_hwmod *am35xx_hwmods[] = {
+ &omap3xxx_dss_core_hwmod, /* XXX ??? */
+ &am35xx_usbhsotg_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
- return omap_hwmod_register(omap3xxx_hwmods);
+ int r;
+ struct omap_hwmod **h = NULL;
+ unsigned int rev;
+
+ /* Register hwmods common to all OMAP3 */
+ r = omap_hwmod_register(omap3xxx_hwmods);
+ if (!r)
+ return r;
+
+ rev = omap_rev();
+
+ /*
+ * Register hwmods common to individual OMAP3 families, all
+ * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
+ * All possible revisions should be included in this conditional.
+ */
+ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+ rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
+ rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
+ h = omap34xx_hwmods;
+ } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
+ h = am35xx_hwmods;
+ } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_2) {
+ h = omap36xx_hwmods;
+ } else {
+ WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
+ return -EINVAL;
+ };
+
+ r = omap_hwmod_register(h);
+ if (!r)
+ return r;
+
+ /*
+ * Register hwmods specific to certain ES levels of a
+ * particular family of silicon (e.g., 34xx ES1.0)
+ */
+ h = NULL;
+ if (rev == OMAP3430_REV_ES1_0) {
+ h = omap3430es1_hwmods;
+ } else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+ rev == OMAP3430_REV_ES3_1_2) {
+ h = omap3430es2plus_hwmods;
+ };
+
+ if (h)
+ r = omap_hwmod_register(h);
+
+ return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 6201422c..7695e5d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -29,6 +29,7 @@
#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/i2c.h>
+#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
@@ -133,7 +134,6 @@
.slaves = omap44xx_dmm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
.mpu_irqs = omap44xx_dmm_irqs,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -189,7 +189,6 @@
},
.slaves = omap44xx_emif_fw_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -236,7 +235,6 @@
},
.slaves = omap44xx_l3_instr_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_1 */
@@ -336,7 +334,6 @@
},
.slaves = omap44xx_l3_main_1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_2 */
@@ -438,7 +435,6 @@
},
.slaves = omap44xx_l3_main_2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_3 */
@@ -496,7 +492,6 @@
},
.slaves = omap44xx_l3_main_3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -559,7 +554,6 @@
},
.slaves = omap44xx_l4_abe_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_cfg */
@@ -588,7 +582,6 @@
},
.slaves = omap44xx_l4_cfg_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_per */
@@ -617,7 +610,6 @@
},
.slaves = omap44xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_wkup */
@@ -646,7 +638,6 @@
},
.slaves = omap44xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -677,7 +668,6 @@
.clkdm_name = "mpuss_clkdm",
.slaves = omap44xx_mpu_private_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -828,7 +818,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves),
.masters = omap44xx_aess_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_aess_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -856,7 +845,6 @@
},
.opt_clks = bandgap_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -917,7 +905,6 @@
},
.slaves = omap44xx_counter_32k_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1005,7 +992,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
.masters = omap44xx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1098,7 +1084,6 @@
},
.slaves = omap44xx_dmic_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1164,7 +1149,6 @@
.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1187,7 +1171,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves),
.masters = omap44xx_dsp_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1278,7 +1261,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves),
.masters = omap44xx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1381,7 +1363,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1480,7 +1461,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* dss_dsi2 */
@@ -1558,7 +1538,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
.slaves = omap44xx_dss_dsi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1656,7 +1635,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1748,7 +1726,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1817,7 +1794,6 @@
},
.slaves = omap44xx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1901,7 +1877,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio2 */
@@ -1957,7 +1932,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio3 */
@@ -2013,7 +1987,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio4 */
@@ -2069,7 +2042,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio5 */
@@ -2125,7 +2097,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio6 */
@@ -2181,7 +2152,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2261,7 +2231,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves),
.masters = omap44xx_hsi_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2345,7 +2314,6 @@
.slaves = omap44xx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c2 */
@@ -2402,7 +2370,6 @@
.slaves = omap44xx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c3 */
@@ -2459,7 +2426,6 @@
.slaves = omap44xx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c4 */
@@ -2516,7 +2482,6 @@
.slaves = omap44xx_i2c4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2577,7 +2542,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2593,7 +2557,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_ipu_hwmod = {
@@ -2616,7 +2579,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves),
.masters = omap44xx_ipu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2706,7 +2668,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves),
.masters = omap44xx_iss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2781,7 +2742,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2797,7 +2757,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_iva_hwmod = {
@@ -2820,7 +2779,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves),
.masters = omap44xx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2890,7 +2848,6 @@
},
.slaves = omap44xx_kbd_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2956,7 +2913,6 @@
},
.slaves = omap44xx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3051,7 +3007,6 @@
},
.slaves = omap44xx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp2 */
@@ -3127,7 +3082,6 @@
},
.slaves = omap44xx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp3 */
@@ -3203,7 +3157,6 @@
},
.slaves = omap44xx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp4 */
@@ -3258,7 +3211,6 @@
},
.slaves = omap44xx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3353,7 +3305,6 @@
},
.slaves = omap44xx_mcpdm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3442,7 +3393,6 @@
.dev_attr = &mcspi1_dev_attr,
.slaves = omap44xx_mcspi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi2 */
@@ -3505,7 +3455,6 @@
.dev_attr = &mcspi2_dev_attr,
.slaves = omap44xx_mcspi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi3 */
@@ -3568,7 +3517,6 @@
.dev_attr = &mcspi3_dev_attr,
.slaves = omap44xx_mcspi3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi4 */
@@ -3629,7 +3577,6 @@
.dev_attr = &mcspi4_dev_attr,
.slaves = omap44xx_mcspi4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3718,7 +3665,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves),
.masters = omap44xx_mmc1_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc2 */
@@ -3779,7 +3725,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves),
.masters = omap44xx_mmc2_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc3 */
@@ -3834,7 +3779,6 @@
},
.slaves = omap44xx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc4 */
@@ -3890,7 +3834,6 @@
},
.slaves = omap44xx_mmc4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc5 */
@@ -3945,7 +3888,6 @@
},
.slaves = omap44xx_mmc5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3987,7 +3929,6 @@
},
.masters = omap44xx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4063,7 +4004,6 @@
},
.slaves = omap44xx_smartreflex_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_iva */
@@ -4112,7 +4052,6 @@
},
.slaves = omap44xx_smartreflex_iva_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_mpu */
@@ -4161,7 +4100,6 @@
},
.slaves = omap44xx_smartreflex_mpu_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4224,7 +4162,6 @@
},
.slaves = omap44xx_spinlock_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4265,6 +4202,16 @@
.sysc = &omap44xx_timer_sysc,
};
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap44xx_timer1_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
@@ -4308,9 +4255,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer2 */
@@ -4356,9 +4303,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer3 */
@@ -4404,9 +4351,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer4 */
@@ -4452,9 +4399,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer5 */
@@ -4519,9 +4466,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer6 */
@@ -4587,9 +4534,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer7 */
@@ -4654,9 +4601,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer8 */
@@ -4721,9 +4668,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer9 */
@@ -4769,9 +4716,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer10 */
@@ -4817,9 +4764,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer11 */
@@ -4865,9 +4812,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4944,7 +4891,6 @@
},
.slaves = omap44xx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart2 */
@@ -4999,7 +4945,6 @@
},
.slaves = omap44xx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart3 */
@@ -5055,7 +5000,6 @@
},
.slaves = omap44xx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart4 */
@@ -5110,7 +5054,6 @@
},
.slaves = omap44xx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5195,7 +5138,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
.masters = omap44xx_usb_otg_hs_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5266,7 +5208,6 @@
},
.slaves = omap44xx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* wd_timer3 */
@@ -5333,7 +5274,6 @@
},
.slaves = omap44xx_wd_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
@@ -5430,7 +5370,7 @@
&omap44xx_mcbsp4_hwmod,
/* mcpdm class */
-/* &omap44xx_mcpdm_hwmod, */
+ &omap44xx_mcpdm_hwmod,
/* mcspi class */
&omap44xx_mcspi1_hwmod,
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 7b9f190..c8b1bef 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -1,25 +1,25 @@
/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+ * OMAP4XXX L3 Interconnect error handling driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
@@ -55,12 +55,12 @@
static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
{
- struct omap4_l3 *l3 = _l3;
- int inttype, i, j;
+ struct omap4_l3 *l3 = _l3;
+ int inttype, i, k;
int err_src = 0;
- u32 std_err_main_addr, std_err_main, err_reg;
- u32 base, slave_addr, clear;
- char *source_name;
+ u32 std_err_main, err_reg, clear, masterid;
+ void __iomem *base, *l3_targ_base;
+ char *target_name, *master_name = "UN IDENTIFIED";
/* Get the Type of interrupt */
inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
@@ -70,43 +70,50 @@
* Read the regerr register of the clock domain
* to determine the source
*/
- base = (u32)l3->l3_base[i];
- err_reg = readl(base + l3_flagmux[i] + (inttype << 3));
+ base = l3->l3_base[i];
+ err_reg = __raw_readl(base + l3_flagmux[i] +
+ + L3_FLAGMUX_REGERR0 + (inttype << 3));
/* Get the corresponding error and analyse */
if (err_reg) {
/* Identify the source from control status register */
- for (j = 0; !(err_reg & (1 << j)); j++)
- ;
+ err_src = __ffs(err_reg);
- err_src = j;
/* Read the stderrlog_main_source from clk domain */
- std_err_main_addr = base + *(l3_targ[i] + err_src);
- std_err_main = readl(std_err_main_addr);
+ l3_targ_base = base + *(l3_targ[i] + err_src);
+ std_err_main = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
+ masterid = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MSTADDR);
switch (std_err_main & CUSTOM_ERROR) {
case STANDARD_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- slave_addr = std_err_main_addr +
- L3_SLAVE_ADDRESS_OFFSET;
- WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n",
- source_name, readl(slave_addr));
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+ target_name,
+ __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_SLVOFSLSB));
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
case CUSTOM_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- WARN(true, "CUSTOM SRESP error with SOURCE:%s\n",
- source_name);
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+ if (masterid == l3_masters[k].id)
+ master_name =
+ l3_masters[k].name;
+ }
+ WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+ master_name, target_name);
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
default:
@@ -120,12 +127,11 @@
return IRQ_HANDLED;
}
-static int __init omap4_l3_probe(struct platform_device *pdev)
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
{
- static struct omap4_l3 *l3;
- struct resource *res;
- int ret;
- int irq;
+ static struct omap4_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
@@ -177,27 +183,25 @@
/*
* Setup interrupt Handlers
*/
- irq = platform_get_irq(pdev, 0);
- ret = request_irq(irq,
+ l3->debug_irq = platform_get_irq(pdev, 0);
+ ret = request_irq(l3->debug_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_DBG);
+ OMAP44XX_IRQ_L3_DBG);
goto err3;
}
- l3->debug_irq = irq;
- irq = platform_get_irq(pdev, 1);
- ret = request_irq(irq,
+ l3->app_irq = platform_get_irq(pdev, 1);
+ ret = request_irq(l3->app_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_APP);
+ OMAP44XX_IRQ_L3_APP);
goto err4;
}
- l3->app_irq = irq;
return 0;
@@ -214,9 +218,9 @@
return ret;
}
-static int __exit omap4_l3_remove(struct platform_device *pdev)
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
{
- struct omap4_l3 *l3 = platform_get_drvdata(pdev);
+ struct omap4_l3 *l3 = platform_get_drvdata(pdev);
free_irq(l3->app_irq, l3);
free_irq(l3->debug_irq, l3);
@@ -228,16 +232,29 @@
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+ {.compatible = "ti,omap4-l3-noc", },
+ {},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
static struct platform_driver omap4_l3_driver = {
- .remove = __exit_p(omap4_l3_remove),
+ .probe = omap4_l3_probe,
+ .remove = __devexit_p(omap4_l3_remove),
.driver = {
- .name = "omap_l3_noc",
+ .name = "omap_l3_noc",
+ .owner = THIS_MODULE,
+ .of_match_table = l3_noc_match,
},
};
static int __init omap4_l3_init(void)
{
- return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe);
+ return platform_driver_register(&omap4_l3_driver);
}
postcore_initcall_sync(omap4_l3_init);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
index 359b833..90b5098 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/arch/arm/mach-omap2/omap_l3_noc.h
@@ -1,132 +1,162 @@
- /*
- * OMAP4XXX L3 Interconnect error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP4XXX L3 Interconnect error handling driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-/*
- * L3 register offsets
- */
#define L3_MODULES 3
#define CLEAR_STDERR_LOG (1 << 31)
#define CUSTOM_ERROR 0x2
#define STANDARD_ERROR 0x0
#define INBAND_ERROR 0x0
-#define EMIF_KERRLOG_OFFSET 0x10
-#define L3_SLAVE_ADDRESS_OFFSET 0x14
-#define LOGICAL_ADDR_ERRORLOG 0x4
#define L3_APPLICATION_ERROR 0x0
#define L3_DEBUG_ERROR 0x1
-u32 l3_flagmux[L3_MODULES] = {
- 0x50C,
- 0x100C,
- 0X020C
+/* L3 TARG register offsets */
+#define L3_TARG_STDERRLOG_MAIN 0x48
+#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
+#define L3_TARG_STDERRLOG_MSTADDR 0x68
+#define L3_FLAGMUX_REGERR0 0xc
+
+#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0]))
+
+static u32 l3_flagmux[L3_MODULES] = {
+ 0x500,
+ 0x1000,
+ 0X0200
};
-/*
- * L3 Target standard Error register offsets
- */
-u32 l3_targ_stderrlog_main_clk1[] = {
- 0x148, /* DMM1 */
- 0x248, /* DMM2 */
- 0x348, /* ABE */
- 0x448, /* L4CFG */
- 0x648 /* CLK2 PWR DISC */
+/* L3 Target standard Error register offsets */
+static u32 l3_targ_inst_clk1[] = {
+ 0x100, /* DMM1 */
+ 0x200, /* DMM2 */
+ 0x300, /* ABE */
+ 0x400, /* L4CFG */
+ 0x600 /* CLK2 PWR DISC */
};
-u32 l3_targ_stderrlog_main_clk2[] = {
- 0x548, /* CORTEX M3 */
- 0x348, /* DSS */
- 0x148, /* GPMC */
- 0x448, /* ISS */
- 0x748, /* IVAHD */
- 0xD48, /* missing in TRM corresponds to AES1*/
- 0x948, /* L4 PER0*/
- 0x248, /* OCMRAM */
- 0x148, /* missing in TRM corresponds to GPMC sERROR*/
- 0x648, /* SGX */
- 0x848, /* SL2 */
- 0x1648, /* C2C */
- 0x1148, /* missing in TRM corresponds PWR DISC CLK1*/
- 0xF48, /* missing in TRM corrsponds to SHA1*/
- 0xE48, /* missing in TRM corresponds to AES2*/
- 0xC48, /* L4 PER3 */
- 0xA48, /* L4 PER1*/
- 0xB48 /* L4 PER2*/
+static u32 l3_targ_inst_clk2[] = {
+ 0x500, /* CORTEX M3 */
+ 0x300, /* DSS */
+ 0x100, /* GPMC */
+ 0x400, /* ISS */
+ 0x700, /* IVAHD */
+ 0xD00, /* missing in TRM corresponds to AES1*/
+ 0x900, /* L4 PER0*/
+ 0x200, /* OCMRAM */
+ 0x100, /* missing in TRM corresponds to GPMC sERROR*/
+ 0x600, /* SGX */
+ 0x800, /* SL2 */
+ 0x1600, /* C2C */
+ 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/
+ 0xF00, /* missing in TRM corrsponds to SHA1*/
+ 0xE00, /* missing in TRM corresponds to AES2*/
+ 0xC00, /* L4 PER3 */
+ 0xA00, /* L4 PER1*/
+ 0xB00 /* L4 PER2*/
};
-u32 l3_targ_stderrlog_main_clk3[] = {
- 0x0148 /* EMUSS */
+static u32 l3_targ_inst_clk3[] = {
+ 0x0100 /* EMUSS */
};
-char *l3_targ_stderrlog_main_name[L3_MODULES][18] = {
+static struct l3_masters_data {
+ u32 id;
+ char name[10];
+} l3_masters[] = {
+ { 0x0 , "MPU"},
+ { 0x10, "CS_ADP"},
+ { 0x14, "xxx"},
+ { 0x20, "DSP"},
+ { 0x30, "IVAHD"},
+ { 0x40, "ISS"},
+ { 0x44, "DucatiM3"},
+ { 0x48, "FaceDetect"},
+ { 0x50, "SDMA_Rd"},
+ { 0x54, "SDMA_Wr"},
+ { 0x58, "xxx"},
+ { 0x5C, "xxx"},
+ { 0x60, "SGX"},
+ { 0x70, "DSS"},
+ { 0x80, "C2C"},
+ { 0x88, "xxx"},
+ { 0x8C, "xxx"},
+ { 0x90, "HSI"},
+ { 0xA0, "MMC1"},
+ { 0xA4, "MMC2"},
+ { 0xA8, "MMC6"},
+ { 0xB0, "UNIPRO1"},
+ { 0xC0, "USBHOSTHS"},
+ { 0xC4, "USBOTGHS"},
+ { 0xC8, "USBHOSTFS"}
+};
+
+static char *l3_targ_inst_name[L3_MODULES][18] = {
{
- "DMM1",
- "DMM2",
- "ABE",
- "L4CFG",
- "CLK2 PWR DISC",
+ "DMM1",
+ "DMM2",
+ "ABE",
+ "L4CFG",
+ "CLK2 PWR DISC",
},
{
- "CORTEX M3" ,
- "DSS ",
- "GPMC ",
- "ISS ",
- "IVAHD ",
- "AES1",
- "L4 PER0",
- "OCMRAM ",
- "GPMC sERROR",
- "SGX ",
- "SL2 ",
- "C2C ",
- "PWR DISC CLK1",
- "SHA1",
- "AES2",
- "L4 PER3",
- "L4 PER1",
- "L4 PER2",
+ "CORTEX M3" ,
+ "DSS ",
+ "GPMC ",
+ "ISS ",
+ "IVAHD ",
+ "AES1",
+ "L4 PER0",
+ "OCMRAM ",
+ "GPMC sERROR",
+ "SGX ",
+ "SL2 ",
+ "C2C ",
+ "PWR DISC CLK1",
+ "SHA1",
+ "AES2",
+ "L4 PER3",
+ "L4 PER1",
+ "L4 PER2",
},
{
- "EMUSS",
+ "EMUSS",
},
};
-u32 *l3_targ[L3_MODULES] = {
- l3_targ_stderrlog_main_clk1,
- l3_targ_stderrlog_main_clk2,
- l3_targ_stderrlog_main_clk3,
+static u32 *l3_targ[L3_MODULES] = {
+ l3_targ_inst_clk1,
+ l3_targ_inst_clk2,
+ l3_targ_inst_clk3,
};
struct omap4_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base */
- void __iomem *l3_base[4];
+ void __iomem *l3_base[L3_MODULES];
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
};
-
#endif
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 873c0e3..a05a62f 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -135,7 +135,7 @@
}
}
-/**
+/*
* omap3_l3_block_irq - handles a register block's irq
* @l3: struct omap3_l3 *
* @base: register block base address
@@ -150,30 +150,29 @@
static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u64 error, int error_addr)
{
- u8 code = omap3_l3_decode_error_code(error);
- u8 initid = omap3_l3_decode_initid(error);
- u8 multi = error & L3_ERROR_LOG_MULTI;
- u32 address = omap3_l3_decode_addr(error_addr);
+ u8 code = omap3_l3_decode_error_code(error);
+ u8 initid = omap3_l3_decode_initid(error);
+ u8 multi = error & L3_ERROR_LOG_MULTI;
+ u32 address = omap3_l3_decode_addr(error_addr);
WARN(true, "%s seen by %s %s at address %x\n",
- omap3_l3_code_string(code),
- omap3_l3_initiator_string(initid),
- multi ? "Multiple Errors" : "",
- address);
+ omap3_l3_code_string(code),
+ omap3_l3_initiator_string(initid),
+ multi ? "Multiple Errors" : "", address);
return IRQ_HANDLED;
}
static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
{
- struct omap3_l3 *l3 = _l3;
- u64 status, clear;
- u64 error;
- u64 error_addr;
- u64 err_source = 0;
- void __iomem *base;
- int int_type;
- irqreturn_t ret = IRQ_NONE;
+ struct omap3_l3 *l3 = _l3;
+ u64 status, clear;
+ u64 error;
+ u64 error_addr;
+ u64 err_source = 0;
+ void __iomem *base;
+ int int_type;
+ irqreturn_t ret = IRQ_NONE;
int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
if (!int_type) {
@@ -191,14 +190,12 @@
}
/* identify the error source */
- for (err_source = 0; !(status & (1 << err_source)); err_source++)
- ;
+ err_source = __ffs(status);
- base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
+ base = l3->rt + omap3_l3_bases[int_type][err_source];
error = omap3_l3_readll(base, L3_ERROR_LOG);
if (error) {
error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-
ret |= omap3_l3_block_irq(l3, error, error_addr);
}
@@ -215,9 +212,9 @@
static int __init omap3_l3_probe(struct platform_device *pdev)
{
- struct omap3_l3 *l3;
- struct resource *res;
- int ret;
+ struct omap3_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h
index ba2ed9a..4f3cebc 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ b/arch/arm/mach-omap2/omap_l3_smx.h
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
@@ -40,7 +40,7 @@
#define L3_SI_CONTROL 0x020
#define L3_SI_FLAG_STATUS_0 0x510
-const u64 shift = 1;
+static const u64 shift = 1;
#define L3_STATUS_0_MPUIA_BRST (shift << 0)
#define L3_STATUS_0_MPUIA_RSP (shift << 1)
@@ -78,32 +78,32 @@
#define L3_STATUS_0_L4EMUTA_REQ (shift << 60)
#define L3_STATUS_0_MAD2DTA_REQ (shift << 61)
-#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
- | L3_STATUS_0_MPUIA_RSP \
- | L3_STATUS_0_IVAIA_BRST \
- | L3_STATUS_0_IVAIA_RSP \
- | L3_STATUS_0_SGXIA_BRST \
- | L3_STATUS_0_SGXIA_RSP \
- | L3_STATUS_0_CAMIA_BRST \
- | L3_STATUS_0_CAMIA_RSP \
- | L3_STATUS_0_DISPIA_BRST \
- | L3_STATUS_0_DISPIA_RSP \
- | L3_STATUS_0_DMARDIA_BRST \
- | L3_STATUS_0_DMARDIA_RSP \
- | L3_STATUS_0_DMAWRIA_BRST \
- | L3_STATUS_0_DMAWRIA_RSP \
- | L3_STATUS_0_USBOTGIA_BRST \
- | L3_STATUS_0_USBOTGIA_RSP \
- | L3_STATUS_0_USBHOSTIA_BRST \
- | L3_STATUS_0_SMSTA_REQ \
- | L3_STATUS_0_GPMCTA_REQ \
- | L3_STATUS_0_OCMRAMTA_REQ \
- | L3_STATUS_0_OCMROMTA_REQ \
- | L3_STATUS_0_IVATA_REQ \
- | L3_STATUS_0_SGXTA_REQ \
- | L3_STATUS_0_L4CORETA_REQ \
- | L3_STATUS_0_L4PERTA_REQ \
- | L3_STATUS_0_L4EMUTA_REQ \
+#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
+ | L3_STATUS_0_MPUIA_RSP \
+ | L3_STATUS_0_IVAIA_BRST \
+ | L3_STATUS_0_IVAIA_RSP \
+ | L3_STATUS_0_SGXIA_BRST \
+ | L3_STATUS_0_SGXIA_RSP \
+ | L3_STATUS_0_CAMIA_BRST \
+ | L3_STATUS_0_CAMIA_RSP \
+ | L3_STATUS_0_DISPIA_BRST \
+ | L3_STATUS_0_DISPIA_RSP \
+ | L3_STATUS_0_DMARDIA_BRST \
+ | L3_STATUS_0_DMARDIA_RSP \
+ | L3_STATUS_0_DMAWRIA_BRST \
+ | L3_STATUS_0_DMAWRIA_RSP \
+ | L3_STATUS_0_USBOTGIA_BRST \
+ | L3_STATUS_0_USBOTGIA_RSP \
+ | L3_STATUS_0_USBHOSTIA_BRST \
+ | L3_STATUS_0_SMSTA_REQ \
+ | L3_STATUS_0_GPMCTA_REQ \
+ | L3_STATUS_0_OCMRAMTA_REQ \
+ | L3_STATUS_0_OCMROMTA_REQ \
+ | L3_STATUS_0_IVATA_REQ \
+ | L3_STATUS_0_SGXTA_REQ \
+ | L3_STATUS_0_L4CORETA_REQ \
+ | L3_STATUS_0_L4PERTA_REQ \
+ | L3_STATUS_0_L4EMUTA_REQ \
| L3_STATUS_0_MAD2DTA_REQ)
#define L3_SI_FLAG_STATUS_1 0x530
@@ -137,19 +137,19 @@
enum omap3_l3_initiator_id {
/* LCD has 1 ID */
- OMAP_L3_LCD = 29,
+ OMAP_L3_LCD = 29,
/* SAD2D has 1 ID */
- OMAP_L3_SAD2D = 28,
+ OMAP_L3_SAD2D = 28,
/* MPU has 5 IDs */
- OMAP_L3_IA_MPU_SS_1 = 27,
- OMAP_L3_IA_MPU_SS_2 = 26,
- OMAP_L3_IA_MPU_SS_3 = 25,
- OMAP_L3_IA_MPU_SS_4 = 24,
- OMAP_L3_IA_MPU_SS_5 = 23,
+ OMAP_L3_IA_MPU_SS_1 = 27,
+ OMAP_L3_IA_MPU_SS_2 = 26,
+ OMAP_L3_IA_MPU_SS_3 = 25,
+ OMAP_L3_IA_MPU_SS_4 = 24,
+ OMAP_L3_IA_MPU_SS_5 = 23,
/* IVA2.2 SS has 3 IDs*/
- OMAP_L3_IA_IVA_SS_1 = 22,
- OMAP_L3_IA_IVA_SS_2 = 21,
- OMAP_L3_IA_IVA_SS_3 = 20,
+ OMAP_L3_IA_IVA_SS_1 = 22,
+ OMAP_L3_IA_IVA_SS_2 = 21,
+ OMAP_L3_IA_IVA_SS_3 = 20,
/* IVA 2.2 SS DMA has 6 IDS */
OMAP_L3_IA_IVA_SS_DMA_1 = 19,
OMAP_L3_IA_IVA_SS_DMA_2 = 18,
@@ -158,25 +158,25 @@
OMAP_L3_IA_IVA_SS_DMA_5 = 15,
OMAP_L3_IA_IVA_SS_DMA_6 = 14,
/* SGX has 1 ID */
- OMAP_L3_IA_SGX = 13,
+ OMAP_L3_IA_SGX = 13,
/* CAM has 3 ID */
- OMAP_L3_IA_CAM_1 = 12,
- OMAP_L3_IA_CAM_2 = 11,
- OMAP_L3_IA_CAM_3 = 10,
+ OMAP_L3_IA_CAM_1 = 12,
+ OMAP_L3_IA_CAM_2 = 11,
+ OMAP_L3_IA_CAM_3 = 10,
/* DAP has 1 ID */
- OMAP_L3_IA_DAP = 9,
+ OMAP_L3_IA_DAP = 9,
/* SDMA WR has 2 IDs */
- OMAP_L3_SDMA_WR_1 = 8,
- OMAP_L3_SDMA_WR_2 = 7,
+ OMAP_L3_SDMA_WR_1 = 8,
+ OMAP_L3_SDMA_WR_2 = 7,
/* SDMA RD has 4 IDs */
- OMAP_L3_SDMA_RD_1 = 6,
- OMAP_L3_SDMA_RD_2 = 5,
- OMAP_L3_SDMA_RD_3 = 4,
- OMAP_L3_SDMA_RD_4 = 3,
+ OMAP_L3_SDMA_RD_1 = 6,
+ OMAP_L3_SDMA_RD_2 = 5,
+ OMAP_L3_SDMA_RD_3 = 4,
+ OMAP_L3_SDMA_RD_4 = 3,
/* HSUSB OTG has 1 ID */
- OMAP_L3_USBOTG = 2,
+ OMAP_L3_USBOTG = 2,
/* HSUSB HOST has 1 ID */
- OMAP_L3_USBHOST = 1,
+ OMAP_L3_USBHOST = 1,
};
enum omap3_l3_code {
@@ -192,21 +192,21 @@
};
struct omap3_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base*/
- void __iomem *rt;
+ void __iomem *rt;
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
/* true when and inband functional error occurs */
- unsigned inband:1;
+ unsigned inband:1;
};
/* offsets for l3 agents in order with the Flag status register */
-unsigned int __iomem omap3_l3_app_bases[] = {
+static unsigned int omap3_l3_app_bases[] = {
/* MPU IA */
0x1400,
0x1400,
@@ -305,7 +305,7 @@
0,
};
-unsigned int __iomem omap3_l3_debug_bases[] = {
+static unsigned int omap3_l3_debug_bases[] = {
/* MPU DATA IA */
0x1400,
/* RESERVED */
@@ -321,7 +321,7 @@
/* REST RESERVED */
};
-u32 *omap3_l3_bases[] = {
+static u32 *omap3_l3_bases[] = {
omap3_l3_app_bases,
omap3_l3_debug_bases,
};
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 07d6140..f515a1a 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -42,8 +42,11 @@
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
+#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
+#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
+#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
@@ -95,6 +98,8 @@
is_offset_valid = true;
}
+ if (!vsel)
+ return 0;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -106,9 +111,9 @@
return 1350000;
if (smps_offset & 0x8)
- return ((((vsel - 1) * 125) + 7000)) * 100;
+ return ((((vsel - 1) * 1266) + 70900)) * 10;
else
- return ((((vsel - 1) * 125) + 6000)) * 100;
+ return ((((vsel - 1) * 1266) + 60770)) * 10;
}
static u8 twl6030_uv_to_vsel(unsigned long uv)
@@ -127,6 +132,8 @@
is_offset_valid = true;
}
+ if (!uv)
+ return 0x00;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -134,16 +141,21 @@
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
- if (uv == 1350000)
+ if (uv > twl6030_vsel_to_uv(0x39)) {
+ if (uv == 1350000)
+ return 0x3A;
+ pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
+ __func__, uv, twl6030_vsel_to_uv(0x39));
return 0x3A;
+ }
if (smps_offset & 0x8)
- return DIV_ROUND_UP(uv - 700000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 709000, 12660) + 1;
else
- return DIV_ROUND_UP(uv - 600000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 607700, 12660) + 1;
}
-static struct omap_volt_pmic_info omap3_mpu_volt_info = {
+static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -158,12 +170,13 @@
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap3_core_volt_info = {
+static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -178,18 +191,19 @@
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_mpu_volt_info = {
+static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1350000,
- .onlp_volt = 1350000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1375000,
+ .onlp_volt = 1375000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -198,18 +212,20 @@
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_iva_volt_info = {
+static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1188000,
+ .onlp_volt = 1188000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -218,18 +234,20 @@
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_core_volt_info = {
+static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1200000,
+ .onlp_volt = 1200000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -238,7 +256,8 @@
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
@@ -250,14 +269,14 @@
if (!cpu_is_omap44xx())
return -ENODEV;
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu");
+ omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("iva");
- omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
+ voltdm = voltdm_lookup("iva");
+ omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
return 0;
}
@@ -270,10 +289,10 @@
return -ENODEV;
if (cpu_is_omap3630()) {
- omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
- omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
- omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
- omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
+ omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
+ omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
+ omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
+ omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
/*
@@ -288,11 +307,11 @@
if (!twl_sr_enable_autoinit)
omap3_twl_set_sr_bit(true);
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu_iva");
+ omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
return 0;
}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index ab8b35b..9262a6b 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -69,7 +69,7 @@
opp_def->hwmod_name, i);
return -EINVAL;
}
- dev = &oh->od->pdev.dev;
+ dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 472bf22..2ab7a9e 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -26,54 +26,21 @@
static struct omap_device_pm_latency *pm_lats;
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
- WARN_ON_ONCE(!mpu_dev);
- return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
- WARN_ON_ONCE(!iva_dev);
- return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
- WARN_ON_ONCE(!l3_dev);
- return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
- WARN_ON_ONCE(!dsp_dev);
- return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup(name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
__func__, name))
return -ENODEV;
- od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
- if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n",
+ pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
+ if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
__func__, name))
return -ENODEV;
- *new_dev = &od->pdev.dev;
-
return 0;
}
@@ -82,16 +49,16 @@
*/
static void omap2_init_processor_devices(void)
{
- _init_omap_device("mpu", &mpu_dev);
+ _init_omap_device("mpu");
if (omap3_has_iva())
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("iva");
if (cpu_is_omap44xx()) {
- _init_omap_device("l3_main_1", &l3_dev);
- _init_omap_device("dsp", &dsp_dev);
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("l3_main_1");
+ _init_omap_device("dsp");
+ _init_omap_device("iva");
} else {
- _init_omap_device("l3_main", &l3_dev);
+ _init_omap_device("l3_main");
}
}
@@ -136,8 +103,8 @@
ret = pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
- printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
- pwrdm->name);
+ pr_err("%s: unable to set state of powerdomain: %s\n",
+ __func__, pwrdm->name);
goto err;
}
@@ -161,37 +128,44 @@
}
/*
- * This API is to be called during init to put the various voltage
+ * This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
- * opp entry and puts the voltage domain to the voltage specifies
+ * opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
- struct device *dev)
+ const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct opp *opp;
unsigned long freq, bootup_volt;
+ struct device *dev;
- if (!vdd_name || !clk_name || !dev) {
- printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+ if (!vdd_name || !clk_name || !oh_name) {
+ pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
- voltdm = omap_voltage_domain_lookup(vdd_name);
+ dev = omap_device_get_by_hwmod_name(oh_name);
+ if (IS_ERR(dev)) {
+ pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+ __func__, oh_name);
+ goto exit;
+ }
+
+ voltdm = voltdm_lookup(vdd_name);
if (IS_ERR(voltdm)) {
- printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+ pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
- printk(KERN_ERR "%s: unable to get clk %s\n",
- __func__, clk_name);
+ pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
@@ -200,24 +174,23 @@
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
- printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+ pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
if (!bootup_volt) {
- printk(KERN_ERR "%s: unable to find voltage corresponding"
+ pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
goto exit;
}
- omap_voltage_scale_vdd(voltdm, bootup_volt);
+ voltdm_scale(voltdm, bootup_volt);
return 0;
exit:
- printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
- __func__, vdd_name);
+ pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
@@ -226,8 +199,8 @@
if (!cpu_is_omap34xx())
return;
- omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_ick", l3_dev);
+ omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
@@ -235,14 +208,15 @@
if (!cpu_is_omap44xx())
return;
- omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
- omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+ omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+ omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
static int __init omap2_common_pm_init(void)
{
- omap2_init_processor_devices();
+ if (!of_have_populated_dt())
+ omap2_init_processor_devices();
omap_pm_if_init();
return 0;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bf089e7..cf0c216 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,8 +53,6 @@
#include "powerdomain.h"
#include "clockdomain.h"
-static int omap2_pm_debug;
-
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
@@ -96,7 +94,6 @@
static void omap2_enter_full_retention(void)
{
u32 l;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* There is 1 reference hold for all children of the oscillator
* clock, the following will remove it. If no one else uses the
@@ -124,10 +121,6 @@
omap2_gpio_prepare_for_idle(0);
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
@@ -155,13 +148,6 @@
console_unlock();
no_sleep:
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
omap2_gpio_resume_after_idle();
clk_enable(osc_ck);
@@ -219,7 +205,6 @@
static void omap2_enter_mpu_retention(void)
{
int only_idle = 0;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* Putting MPU into the WFI state while a transfer is active
* seems to cause the I2C block to timeout. Why? Good question. */
@@ -246,19 +231,7 @@
only_idle = 1;
}
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
omap2_sram_idle();
-
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
}
static int omap2_can_sleep(void)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7255d9bc..c8cbd00 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -55,7 +55,7 @@
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
- return (suspend_state != PM_SUSPEND_ON);
+ return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
}
#else
static inline bool is_suspending(void)
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
index 171fccd..f97afff 100644
--- a/arch/arm/mach-omap2/powerdomain-common.c
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -1,9 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/powerdomain-common.c
- * Contains common powerdomain framework functions
+ * Common powerdomain framework functions
*
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
*
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index ef71fdd..5164d58 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1,7 +1,7 @@
/*
* OMAP powerdomain control
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Written by Paul Walmsley
@@ -77,13 +77,11 @@
static int _pwrdm_register(struct powerdomain *pwrdm)
{
int i;
+ struct voltagedomain *voltdm;
if (!pwrdm || !pwrdm->name)
return -EINVAL;
- if (!omap_chip_is(pwrdm->omap_chip))
- return -EINVAL;
-
if (cpu_is_omap44xx() &&
pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) {
pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",
@@ -94,6 +92,16 @@
if (_pwrdm_lookup(pwrdm->name))
return -EEXIST;
+ voltdm = voltdm_lookup(pwrdm->voltdm.name);
+ if (!voltdm) {
+ pr_err("powerdomain: %s: voltagedomain %s does not exist\n",
+ pwrdm->name, pwrdm->voltdm.name);
+ return -EINVAL;
+ }
+ pwrdm->voltdm.ptr = voltdm;
+ INIT_LIST_HEAD(&pwrdm->voltdm_node);
+ voltdm_add_pwrdm(voltdm, pwrdm);
+
list_add(&pwrdm->node, &pwrdm_list);
/* Initialize the powerdomain's state counter */
@@ -194,36 +202,76 @@
/* Public functions */
/**
- * pwrdm_init - set up the powerdomain layer
- * @pwrdms: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specific implementations
+ * pwrdm_register_platform_funcs - register powerdomain implementation fns
+ * @po: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdms, registering all
- * that are available on the current CPU. Also, program all
- * powerdomain target state as ON; this is to prevent domains from
- * hitting low power states (if bootloader has target states set to
- * something other than ON) and potentially even losing context while
- * PM is not fully initialized. The PM late init code can then program
- * the desired target state for all the power domains. No return
- * value.
+ * Register the list of function pointers used to implement the
+ * powerdomain functions on different OMAP SoCs. Should be called
+ * before any other pwrdm_register*() function. Returns -EINVAL if
+ * @po is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
+int pwrdm_register_platform_funcs(struct pwrdm_ops *po)
+{
+ if (!po)
+ return -EINVAL;
+
+ if (arch_pwrdm)
+ return -EEXIST;
+
+ arch_pwrdm = po;
+
+ return 0;
+}
+
+/**
+ * pwrdm_register_pwrdms - register SoC powerdomains
+ * @ps: pointer to an array of struct powerdomain to register
+ *
+ * Register the powerdomains available on a particular OMAP SoC. Must
+ * be called after pwrdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * pwrdm_register_platform_funcs(); -EINVAL if the argument @ps is
+ * null; or 0 upon success.
+ */
+int pwrdm_register_pwrdms(struct powerdomain **ps)
{
struct powerdomain **p = NULL;
+
+ if (!arch_pwrdm)
+ return -EEXIST;
+
+ if (!ps)
+ return -EINVAL;
+
+ for (p = ps; *p; p++)
+ _pwrdm_register(*p);
+
+ return 0;
+}
+
+/**
+ * pwrdm_complete_init - set up the powerdomain layer
+ *
+ * Do whatever is necessary to initialize registered powerdomains and
+ * powerdomain code. Currently, this programs the next power state
+ * for each powerdomain to ON. This prevents powerdomains from
+ * unexpectedly losing context or entering high wakeup latency modes
+ * with non-power-management-enabled kernels. Must be called after
+ * pwrdm_register_pwrdms(). Returns -EACCES if called before
+ * pwrdm_register_pwrdms(), or 0 upon success.
+ */
+int pwrdm_complete_init(void)
+{
struct powerdomain *temp_p;
- if (!custom_funcs)
- WARN(1, "powerdomain: No custom pwrdm functions registered\n");
- else
- arch_pwrdm = custom_funcs;
-
- if (pwrdms) {
- for (p = pwrdms; *p; p++)
- _pwrdm_register(*p);
- }
+ if (list_empty(&pwrdm_list))
+ return -EACCES;
list_for_each_entry(temp_p, &pwrdm_list, node)
pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
+
+ return 0;
}
/**
@@ -390,6 +438,18 @@
}
/**
+ * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in
+ * @pwrdm: struct powerdomain *
+ *
+ * Return a pointer to the struct voltageomain that the specified powerdomain
+ * @pwrdm exists in.
+ */
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm)
+{
+ return pwrdm->voltdm.ptr;
+}
+
+/**
* pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
* @pwrdm: struct powerdomain *
*
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index d23d979..42e6dd8 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -24,6 +24,8 @@
#include <plat/cpu.h>
+#include "voltage.h"
+
/* Powerdomain basic power states */
#define PWRDM_POWER_OFF 0x0
#define PWRDM_POWER_RET 0x1
@@ -78,7 +80,7 @@
/**
* struct powerdomain - OMAP powerdomain
* @name: Powerdomain name
- * @omap_chip: represents the OMAP chip types containing this pwrdm
+ * @voltdm: voltagedomain containing this powerdomain
* @prcm_offs: the address offset from CM_BASE/PRM_BASE
* @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
* @pwrsts: Possible powerdomain power states
@@ -89,6 +91,7 @@
* @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
+ * @voltdm_node: list_head linking all powerdomains in a voltagedomain
* @state:
* @state_counter:
* @timer:
@@ -98,7 +101,10 @@
*/
struct powerdomain {
const char *name;
- const struct omap_chip_id omap_chip;
+ union {
+ const char *name;
+ struct voltagedomain *ptr;
+ } voltdm;
const s16 prcm_offs;
const u8 pwrsts;
const u8 pwrsts_logic_ret;
@@ -109,6 +115,7 @@
const u8 prcm_partition;
struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
struct list_head node;
+ struct list_head voltdm_node;
int state;
unsigned state_counter[PWRDM_MAX_PWRSTS];
unsigned ret_logic_off_counter;
@@ -162,7 +169,9 @@
int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
};
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
+int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
+int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
+int pwrdm_complete_init(void);
struct powerdomain *pwrdm_lookup(const char *name);
@@ -176,6 +185,7 @@
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm));
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
@@ -210,7 +220,8 @@
u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
-extern void omap2xxx_powerdomains_init(void);
+extern void omap242x_powerdomains_init(void);
+extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index cf600e2..6a17e4c 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -1,7 +1,7 @@
/*
* OMAP2 and OMAP3 powerdomain control
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 4210c33..d3a5399 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 common powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -12,20 +12,6 @@
*/
/*
- * To Do List
- * -> Move the Sleep/Wakeup dependencies from Power Domain framework to
- * Clock Domain Framework
- */
-
-/*
- * This file contains all of the powerdomains that have some element
- * of software control for the OMAP24xx and OMAP34xx chips.
- *
- * This is not an exhaustive listing of powerdomains on the chips; only
- * powerdomains that can be controlled in software.
- */
-
-/*
* The names for the DSP/IVA2 powerdomains are confusing.
*
* Most OMAP chips have an on-board DSP.
@@ -59,8 +45,6 @@
struct powerdomain gfx_omap2_pwrdm = {
.name = "gfx_pwrdm",
.prcm_offs = GFX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -70,11 +54,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
struct powerdomain wkup_omap2_pwrdm = {
.name = "wkup_pwrdm",
.prcm_offs = WKUP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_ON,
+ .voltdm = { .name = "wakeup" },
};
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index cc389fb..2385c1f 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2XXX powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -28,7 +28,6 @@
static struct powerdomain dsp_pwrdm = {
.name = "dsp_pwrdm",
.prcm_offs = OMAP24XX_DSP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -38,12 +37,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain mpu_24xx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -53,12 +52,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_24xx_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.banks = 3,
.pwrsts_mem_ret = {
@@ -71,6 +70,7 @@
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
},
+ .voltdm = { .name = "core" },
};
@@ -78,14 +78,11 @@
* 2430-specific powerdomains
*/
-#ifdef CONFIG_SOC_OMAP2430
-
/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
static struct powerdomain mdm_pwrdm = {
.name = "mdm_pwrdm",
.prcm_offs = OMAP2430_MDM_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -95,29 +92,44 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
-#endif /* CONFIG_SOC_OMAP2430 */
+/*
+ *
+ */
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap24xx[] __initdata = {
&wkup_omap2_pwrdm,
&gfx_omap2_pwrdm,
-
-#ifdef CONFIG_ARCH_OMAP2
&dsp_pwrdm,
&mpu_24xx_pwrdm,
&core_24xx_pwrdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mdm_pwrdm,
-#endif
NULL
};
-void __init omap2xxx_powerdomains_init(void)
+static struct powerdomain *powerdomains_omap2430[] __initdata = {
+ &mdm_pwrdm,
+ NULL
+};
+
+void __init omap242x_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap2xxx, &omap2_pwrdm_operations);
+ if (!cpu_is_omap2420())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_complete_init();
+}
+
+void __init omap243x_powerdomains_init(void)
+{
+ if (!cpu_is_omap2430())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_register_pwrdms(powerdomains_omap2430);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..8ef26dae 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP3 powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <plat/cpu.h>
+
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
@@ -27,8 +29,6 @@
* 34XX-specific powerdomains, dependencies
*/
-#ifdef CONFIG_ARCH_OMAP3
-
/*
* Powerdomains
*/
@@ -36,7 +36,6 @@
static struct powerdomain iva2_pwrdm = {
.name = "iva2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 4,
@@ -52,12 +51,12 @@
[2] = PWRSTS_OFF_ON,
[3] = PWRSTS_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain mpu_3xxx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.flags = PWRDM_HAS_MPU_QUIRK,
@@ -68,6 +67,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
/*
@@ -83,10 +83,6 @@
static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3630ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -98,13 +94,12 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_3xxx_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
- CHIP_GE_OMAP3630ES1_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
/*
@@ -121,11 +116,11 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_DSS_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -136,6 +131,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
/*
@@ -146,7 +142,6 @@
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
/* XXX This is accurate for 3430 SGX, but what about GFX? */
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -157,11 +152,11 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain cam_pwrdm = {
.name = "cam_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_CAM_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -172,12 +167,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain per_pwrdm = {
.name = "per_pwrdm",
.prcm_offs = OMAP3430_PER_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -187,26 +182,26 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain emu_pwrdm = {
.name = "emu_pwrdm",
.prcm_offs = OMAP3430_EMU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain neon_pwrdm = {
.name = "neon_pwrdm",
.prcm_offs = OMAP3430_NEON_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
/*
@@ -223,65 +218,103 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll1_pwrdm = {
.name = "dpll1_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll2_pwrdm = {
.name = "dpll2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll3_pwrdm = {
.name = "dpll3_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll4_pwrdm = {
.name = "dpll4_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll5_pwrdm = {
.name = "dpll5_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+ .voltdm = { .name = "core" },
};
/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap3xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap3430_common[] __initdata = {
&wkup_omap2_pwrdm,
- &gfx_omap2_pwrdm,
&iva2_pwrdm,
&mpu_3xxx_pwrdm,
&neon_pwrdm,
- &core_3xxx_pre_es3_1_pwrdm,
- &core_3xxx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
- &sgx_pwrdm,
- &usbhost_pwrdm,
&dpll1_pwrdm,
&dpll2_pwrdm,
&dpll3_pwrdm,
&dpll4_pwrdm,
- &dpll5_pwrdm,
-#endif
NULL
};
+static struct powerdomain *powerdomains_omap3430es1[] __initdata = {
+ &gfx_omap2_pwrdm,
+ &core_3xxx_pre_es3_1_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.0 */
+static struct powerdomain *powerdomains_omap3430es2_es3_0[] __initdata = {
+ &core_3xxx_pre_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.1+ */
+static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = {
+ &core_3xxx_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
void __init omap3xxx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations);
+ unsigned int rev;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap3430_common);
+
+ rev = omap_rev();
+
+ if (rev == OMAP3430_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es1);
+ else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
+ else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
+ rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
+ pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
+ else
+ WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
+
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 247e794..704664c 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -33,9 +33,9 @@
/* core_44xx_pwrdm: CORE power domain */
static struct powerdomain core_44xx_pwrdm = {
.name = "core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CORE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 5,
@@ -59,9 +59,9 @@
/* gfx_44xx_pwrdm: 3D accelerator power domain */
static struct powerdomain gfx_44xx_pwrdm = {
.name = "gfx_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_GFX_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -76,9 +76,9 @@
/* abe_44xx_pwrdm: Audio back end power domain */
static struct powerdomain abe_44xx_pwrdm = {
.name = "abe_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_ABE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
@@ -96,9 +96,9 @@
/* dss_44xx_pwrdm: Display subsystem power domain */
static struct powerdomain dss_44xx_pwrdm = {
.name = "dss_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_DSS_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
@@ -114,9 +114,9 @@
/* tesla_44xx_pwrdm: Tesla processor power domain */
static struct powerdomain tesla_44xx_pwrdm = {
.name = "tesla_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_TESLA_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -136,9 +136,9 @@
/* wkup_44xx_pwrdm: Wake-up power domain */
static struct powerdomain wkup_44xx_pwrdm = {
.name = "wkup_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_WKUP_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -152,9 +152,9 @@
/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
static struct powerdomain cpu0_44xx_pwrdm = {
.name = "cpu0_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -169,9 +169,9 @@
/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
static struct powerdomain cpu1_44xx_pwrdm = {
.name = "cpu1_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -186,9 +186,9 @@
/* emu_44xx_pwrdm: Emulation power domain */
static struct powerdomain emu_44xx_pwrdm = {
.name = "emu_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_EMU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -202,9 +202,9 @@
/* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
static struct powerdomain mpu_44xx_pwrdm = {
.name = "mpu_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -223,9 +223,9 @@
/* ivahd_44xx_pwrdm: IVA-HD power domain */
static struct powerdomain ivahd_44xx_pwrdm = {
.name = "ivahd_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_IVAHD_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
@@ -247,9 +247,9 @@
/* cam_44xx_pwrdm: Camera subsystem power domain */
static struct powerdomain cam_44xx_pwrdm = {
.name = "cam_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CAM_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -264,9 +264,9 @@
/* l3init_44xx_pwrdm: L3 initators pheripherals power domain */
static struct powerdomain l3init_44xx_pwrdm = {
.name = "l3init_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L3INIT_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -282,9 +282,9 @@
/* l4per_44xx_pwrdm: Target peripherals power domain */
static struct powerdomain l4per_44xx_pwrdm = {
.name = "l4per_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L4PER_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -305,18 +305,18 @@
*/
static struct powerdomain always_on_core_44xx_pwrdm = {
.name = "always_on_core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
};
/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
static struct powerdomain cefuse_44xx_pwrdm = {
.name = "cefuse_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CEFUSE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
@@ -352,5 +352,7 @@
void __init omap44xx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap44xx, &omap4_pwrdm_operations);
+ pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap44xx);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 2e40a5c..8db5f03 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -151,17 +151,10 @@
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->prm) {
- prm_base = ioremap(omap2_globals->prm, SZ_8K);
- WARN_ON(!prm_base);
- }
- if (omap2_globals->cm) {
- cm_base = ioremap(omap2_globals->cm, SZ_8K);
- WARN_ON(!cm_base);
- }
- if (omap2_globals->cm2) {
- cm2_base = ioremap(omap2_globals->cm2, SZ_8K);
- WARN_ON(!cm2_base);
- }
+ if (omap2_globals->prm)
+ prm_base = omap2_globals->prm;
+ if (omap2_globals->cm)
+ cm_base = omap2_globals->cm;
+ if (omap2_globals->cm2)
+ cm2_base = omap2_globals->cm2;
}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 051213f..f02d87f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -20,6 +20,8 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
+
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
@@ -156,3 +158,57 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+ u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+ [OMAP3_VP_VDD_MPU_ID] = {
+ .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+ },
+ [OMAP3_VP_VDD_CORE_ID] = {
+ .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+ },
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+
+ omap2_prm_write_mod_reg(vp->tranxdone_status,
+ OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+ return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index a1fc62a..cef533d 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -303,7 +303,19 @@
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
#endif /* CONFIG_ARCH_OMAP4 */
+
#endif
/*
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 0016555..495a31a 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -21,8 +21,11 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prminst44xx.h"
/* PRM low-level functions */
@@ -50,3 +53,71 @@
return v;
}
+
+/* PRM VP */
+
+/*
+ * struct omap4_vp - OMAP4 VP register access description.
+ * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap4_vp {
+ u32 irqstatus_mpu;
+ u32 tranxdone_status;
+};
+
+static struct omap4_vp omap4_vp[] = {
+ [OMAP4_VP_VDD_MPU_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
+ .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_IVA_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_CORE_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
+ },
+};
+
+u32 omap4_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap4_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+
+ omap4_prminst_write_inst_reg(vp->tranxdone_status,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+};
+
+u32 omap4_prm_vcvp_read(u8 offset)
+{
+ return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+void omap4_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap4_prminst_rmw_inst_reg_bits(mask, bits,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST,
+ offset);
+}
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7dfa379..3d66ccd 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -751,6 +751,18 @@
extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+/* OMAP4-specific VP functions */
+u32 omap4_prm_vp_check_txdone(u8 vp_id);
+void omap4_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP4 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap4_prm_vcvp_read(u8 offset);
+extern void omap4_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index da6f3a6..8f27828 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -117,15 +117,10 @@
void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->sdrc) {
- omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K);
- WARN_ON(!omap2_sdrc_base);
- }
- if (omap2_globals->sms) {
- omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K);
- WARN_ON(!omap2_sms_base);
- }
+ if (omap2_globals->sdrc)
+ omap2_sdrc_base = omap2_globals->sdrc;
+ if (omap2_globals->sms)
+ omap2_sms_base = omap2_globals->sms;
}
/**
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 466fc722..9992dbf 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -107,28 +107,6 @@
static LIST_HEAD(uart_list);
static u8 num_uarts;
-static int uart_idle_hwmod(struct omap_device *od)
-{
- omap_hwmod_idle(od->hwmods[0]);
-
- return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
- omap_hwmod_enable(od->hwmods[0]);
-
- return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
- {
- .deactivate_func = uart_idle_hwmod,
- .activate_func = uart_enable_hwmod,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
@@ -711,7 +689,7 @@
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
@@ -799,20 +777,19 @@
if (WARN_ON(!oh))
return;
- od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
- omap_uart_latency,
- ARRAY_SIZE(omap_uart_latency), false);
- WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+ pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+ NULL, 0, false);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
name, oh->name);
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
uart->membase = omap_hwmod_get_mpu_rt_va(oh);
- uart->pdev = &od->pdev;
+ uart->pdev = pdev;
oh->dev_attr = uart;
@@ -846,8 +823,8 @@
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
- device_init_wakeup(&od->pdev.dev, true);
- DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
+ device_init_wakeup(&pdev->dev, true);
+ DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index f438cf4..53d9d0a 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -15,7 +15,7 @@
static int sr_class3_enable(struct voltagedomain *voltdm)
{
- unsigned long volt = omap_voltage_get_nom_volt(voltdm);
+ unsigned long volt = voltdm_get_voltage(voltdm);
if (!volt) {
pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
@@ -32,7 +32,7 @@
omap_vp_disable(voltdm);
sr_disable(voltdm);
if (is_volt_reset)
- omap_voltage_reset(voltdm);
+ voltdm_reset(voltdm);
return 0;
}
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index f49804f..0347b93 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -62,6 +62,7 @@
static struct omap_sr_class_data *sr_class;
static struct omap_sr_pmic_data *sr_pmic_data;
+static struct dentry *sr_dbg_dir;
static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
{
@@ -826,9 +827,10 @@
struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
- struct dentry *vdd_dbg_dir, *nvalue_dir;
+ struct dentry *nvalue_dir;
struct omap_volt_data *volt_data;
int i, ret = 0;
+ char *name;
if (!sr_info) {
dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
@@ -899,18 +901,25 @@
}
dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-
- /*
- * If the voltage domain debugfs directory is not created, do
- * not try to create rest of the debugfs entries.
- */
- vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir) {
- ret = -EINVAL;
- goto err_iounmap;
+ if (!sr_dbg_dir) {
+ sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
+ if (!sr_dbg_dir) {
+ ret = PTR_ERR(sr_dbg_dir);
+ pr_err("%s:sr debugfs dir creation failed(%d)\n",
+ __func__, ret);
+ goto err_iounmap;
+ }
}
- sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
+ name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
+ if (!name) {
+ dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+ sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
+ kfree(name);
if (IS_ERR(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 10d3c5e..9f43fcc 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -31,14 +31,6 @@
static bool sr_enable_on_init;
-static struct omap_device_pm_latency omap_sr_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
- },
-};
-
/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
@@ -80,7 +72,7 @@
static int sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_volt_data *volt_data;
char *name = "smartreflex";
static int i;
@@ -102,7 +94,7 @@
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
- sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name);
+ sr_data->voltdm = voltdm_lookup(oh->vdd_name);
if (IS_ERR(sr_data->voltdm)) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, oh->vdd_name);
@@ -120,10 +112,9 @@
sr_data->enable_on_init = sr_enable_on_init;
- od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
- omap_sr_latency,
- ARRAY_SIZE(omap_sr_latency), 0);
- if (IS_ERR(od))
+ pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+ NULL, 0, 0);
+ if (IS_ERR(pdev))
pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
__func__, name, oh->name);
exit:
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cf1de7d..e49fc7b 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/slab.h>
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
@@ -42,6 +43,10 @@
#include <asm/sched_clock.h>
#include <plat/common.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#include "powerdomain.h"
/* Parent clocks, eventually these will come from the clock framework */
@@ -67,7 +72,7 @@
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
-u32 sys_timer_reserved;
+static u32 sys_timer_reserved;
/* Clockevent code */
@@ -78,7 +83,7 @@
{
struct clock_event_device *evt = &clockevent_gpt;
- __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
evt->event_handler(evt);
return IRQ_HANDLED;
@@ -93,7 +98,7 @@
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST,
+ __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
0xffffffff - cycles, 1);
return 0;
@@ -104,16 +109,16 @@
{
u32 period;
- __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate);
+ __omap_dm_timer_stop(&clkev, 1, clkev.rate);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
period = clkev.rate / HZ;
period -= 1;
/* Looks like we need to first set the load value separately */
- __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG,
+ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
0xffffffff - period, 1);
- __omap_dm_timer_load_start(clkev.io_base,
+ __omap_dm_timer_load_start(&clkev,
OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
0xffffffff - period, 1);
break;
@@ -189,7 +194,8 @@
clk_put(src);
}
}
- __omap_dm_timer_reset(timer->io_base, 1, 1);
+ __omap_dm_timer_init_regs(timer);
+ __omap_dm_timer_reset(timer, 1, 1);
timer->posted = 1;
timer->rate = clk_get_rate(timer->fclk);
@@ -210,7 +216,7 @@
omap2_gp_timer_irq.dev_id = (void *)&clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
- __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
clockevent_gpt.shift);
@@ -251,7 +257,7 @@
static DEFINE_CLOCK_DATA(cd);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
- return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
}
static struct clocksource clocksource_gpt = {
@@ -266,7 +272,7 @@
{
u32 cyc;
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
update_sched_clock(&cd, cyc, (u32)~0);
}
@@ -276,7 +282,7 @@
u32 cyc = 0;
if (clksrc.reserved)
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
@@ -293,7 +299,7 @@
pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
gptimer_id, clksrc.rate);
- __omap_dm_timer_load_start(clksrc.io_base,
+ __omap_dm_timer_load_start(&clksrc,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
@@ -341,3 +347,167 @@
}
OMAP_SYS_TIMER(4)
#endif
+
+/**
+ * omap2_dm_timer_set_src - change the timer input clock source
+ * @pdev: timer platform device pointer
+ * @source: array index of parent clock source
+ */
+static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
+{
+ int ret;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
+ struct clk *fclk, *parent;
+ char *parent_name = NULL;
+
+ fclk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR_OR_NULL(fclk)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "sys_ck";
+ break;
+
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "32k_ck";
+ break;
+
+ case OMAP_TIMER_SRC_EXT_CLK:
+ if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
+ parent_name = "alt_ck";
+ break;
+ }
+ dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
+ __func__, __LINE__);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ parent = clk_get(&pdev->dev, parent_name);
+ if (IS_ERR_OR_NULL(parent)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
+ __func__, __LINE__, parent_name);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ ret = clk_set_parent(fclk, parent);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
+ __func__, parent_name);
+ ret = -EINVAL;
+ }
+
+ clk_put(parent);
+ clk_put(fclk);
+
+ return ret;
+}
+
+struct omap_device_pm_latency omap2_dmtimer_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+/**
+ * omap_timer_init - build and register timer device with an
+ * associated timer hwmod
+ * @oh: timer hwmod pointer to be used to build timer device
+ * @user: parameter that can be passed from calling hwmod API
+ *
+ * Called by omap_hwmod_for_each_by_class to register each of the timer
+ * devices present in the system. The number of timer devices is known
+ * by parsing through the hwmod database for a given class name. At the
+ * end of function call memory is allocated for timer device and it is
+ * registered to the framework ready to be proved by the driver.
+ */
+static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
+{
+ int id;
+ int ret = 0;
+ char *name = "omap_timer";
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+ struct omap_timer_capability_dev_attr *timer_dev_attr;
+ struct powerdomain *pwrdm;
+
+ pr_debug("%s: %s\n", __func__, oh->name);
+
+ /* on secure device, do not register secure timer */
+ timer_dev_attr = oh->dev_attr;
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr)
+ if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE)
+ return ret;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: No memory for [%s]\n", __func__, oh->name);
+ return -ENOMEM;
+ }
+
+ /*
+ * Extract the IDs from name field in hwmod database
+ * and use the same for constructing ids' for the
+ * timer devices. In a way, we are avoiding usage of
+ * static variable witin the function to do the same.
+ * CAUTION: We have to be careful and make sure the
+ * name in hwmod database does not change in which case
+ * we might either make corresponding change here or
+ * switch back static variable mechanism.
+ */
+ sscanf(oh->name, "timer%2d", &id);
+
+ pdata->set_timer_src = omap2_dm_timer_set_src;
+ pdata->timer_ip_version = oh->class->rev;
+
+ /* Mark clocksource and clockevent timers as reserved */
+ if ((sys_timer_reserved >> (id - 1)) & 0x1)
+ pdata->reserved = 1;
+
+ pwrdm = omap_hwmod_get_pwrdm(oh);
+ pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
+#ifdef CONFIG_PM
+ pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+#endif
+ pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
+ omap2_dmtimer_latency,
+ ARRAY_SIZE(omap2_dmtimer_latency),
+ 0);
+
+ if (IS_ERR(pdev)) {
+ pr_err("%s: Can't build omap_device for %s: %s.\n",
+ __func__, name, oh->name);
+ ret = -EINVAL;
+ }
+
+ kfree(pdata);
+
+ return ret;
+}
+
+/**
+ * omap2_dm_timer_init - top level regular device initialization
+ *
+ * Uses dedicated hwmod api to parse through hwmod database for
+ * given class name and then build and register the timer device.
+ */
+static int __init omap2_dm_timer_init(void)
+{
+ int ret;
+
+ ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
+ if (unlikely(ret)) {
+ pr_err("%s: device registration failed.\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+arch_initcall(omap2_dm_timer_init);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index daa056e..52243577 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -99,7 +99,7 @@
static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
static struct regulator_init_data omap3_vpll2_idata = {
@@ -235,6 +235,12 @@
},
};
+static struct regulator_consumer_supply omap4_vcxio_supply[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"),
+};
+
static struct regulator_init_data omap4_vcxio_idata = {
.constraints = {
.min_uV = 1800000,
@@ -243,7 +249,10 @@
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
+ .always_on = true,
},
+ .num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply),
+ .consumer_supplies = omap4_vcxio_supply,
};
static struct regulator_init_data omap4_vusb_idata = {
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 19e4dac..47fb5d6 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,14 +60,6 @@
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static struct omap_device_pm_latency omap_musb_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
{
switch (board_data->interface_type) {
@@ -115,7 +107,6 @@
void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
{
struct omap_hwmod *oh;
- struct omap_device *od;
struct platform_device *pdev;
struct device *dev;
int bus_id = -1;
@@ -145,22 +136,19 @@
name = "musb-omap2430";
}
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
+ oh = omap_hwmod_lookup(oh_name);
+ if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+ __func__, oh_name))
+ return;
- od = omap_device_build(name, bus_id, oh, &musb_plat,
- sizeof(musb_plat), omap_musb_latency,
- ARRAY_SIZE(omap_musb_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, bus_id, oh, &musb_plat,
+ sizeof(musb_plat), NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Could not build omap_device for %s %s\n",
name, oh_name);
return;
}
- pdev = &od->pdev;
dev = &pdev->dev;
get_device(dev);
dev->dma_mask = &musb_dmamask;
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
new file mode 100644
index 0000000..031d116
--- /dev/null
+++ b/arch/arm/mach-omap2/vc.c
@@ -0,0 +1,367 @@
+/*
+ * OMAP Voltage Controller (VC) interface
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+
+#include "voltage.h"
+#include "vc.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+/**
+ * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
+ * @sa: bit for slave address
+ * @rav: bit for voltage configuration register
+ * @rac: bit for command configuration register
+ * @racen: enable bit for RAC
+ * @cmd: bit for command value set selection
+ *
+ * Channel configuration bits, common for OMAP3+
+ * OMAP3 register: PRM_VC_CH_CONF
+ * OMAP4 register: PRM_VC_CFG_CHANNEL
+ * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG
+ */
+struct omap_vc_channel_cfg {
+ u8 sa;
+ u8 rav;
+ u8 rac;
+ u8 racen;
+ u8 cmd;
+};
+
+static struct omap_vc_channel_cfg vc_default_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(1),
+ .rac = BIT(2),
+ .racen = BIT(3),
+ .cmd = BIT(4),
+};
+
+/*
+ * On OMAP3+, all VC channels have the above default bitfield
+ * configuration, except the OMAP4 MPU channel. This appears
+ * to be a freak accident as every other VC channel has the
+ * default configuration, thus creating a mutant channel config.
+ */
+static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(2),
+ .rac = BIT(3),
+ .racen = BIT(4),
+ .cmd = BIT(1),
+};
+
+static struct omap_vc_channel_cfg *vc_cfg_bits;
+#define CFG_CHANNEL_MASK 0x1f
+
+/**
+ * omap_vc_config_channel - configure VC channel to PMIC mappings
+ * @voltdm: pointer to voltagdomain defining the desired VC channel
+ *
+ * Configures the VC channel to PMIC mappings for the following
+ * PMIC settings
+ * - i2c slave address (SA)
+ * - voltage configuration address (RAV)
+ * - command configuration address (RAC) and enable bit (RACEN)
+ * - command values for ON, ONLP, RET and OFF (CMD)
+ *
+ * This function currently only allows flexible configuration of the
+ * non-default channel. Starting with OMAP4, there are more than 2
+ * channels, with one defined as the default (on OMAP4, it's MPU.)
+ * Only the non-default channel can be configured.
+ */
+static int omap_vc_config_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+
+ /*
+ * For default channel, the only configurable bit is RACEN.
+ * All others must stay at zero (see function comment above.)
+ */
+ if (vc->flags & OMAP_VC_CHANNEL_DEFAULT)
+ vc->cfg_channel &= vc_cfg_bits->racen;
+
+ voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift,
+ vc->cfg_channel << vc->cfg_channel_sa_shift,
+ vc->cfg_channel_reg);
+
+ return 0;
+}
+
+/* Voltage scale and accessory APIs */
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 vc_cmdval;
+
+ /* Check if sufficient pmic info is available for this vdd */
+ if (!voltdm->pmic) {
+ pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ if (!voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC function to convert voltage in uV to"
+ "vsel not registered. Hence unable to scale voltage"
+ "for vdd_%s\n", __func__, voltdm->name);
+ return -ENODATA;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ *target_vsel = voltdm->pmic->uv_to_vsel(target_volt);
+ *current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt);
+
+ /* Setting the ON voltage to the new target voltage */
+ vc_cmdval = voltdm->read(vc->cmdval_reg);
+ vc_cmdval &= ~vc->common->cmd_on_mask;
+ vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
+ voltdm->write(vc_cmdval, vc->cmdval_reg);
+
+ omap_vp_update_errorgain(voltdm, target_volt);
+
+ return 0;
+}
+
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel)
+{
+ u32 smps_steps = 0, smps_delay = 0;
+
+ smps_steps = abs(target_vsel - current_vsel);
+ /* SMPS slew rate / step size. 2us added as buffer. */
+ smps_delay = ((smps_steps * voltdm->pmic->step_size) /
+ voltdm->pmic->slew_rate) + 2;
+ udelay(smps_delay);
+}
+
+/* vc_bypass_scale - VC bypass method of voltage scaling */
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 loop_cnt = 0, retries_cnt = 0;
+ u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
+ u8 target_vsel, current_vsel;
+ int ret;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ vc_valid = vc->common->valid;
+ vc_bypass_val_reg = vc->common->bypass_val_reg;
+ vc_bypass_value = (target_vsel << vc->common->data_shift) |
+ (vc->volt_reg_addr << vc->common->regaddr_shift) |
+ (vc->i2c_slave_addr << vc->common->slaveaddr_shift);
+
+ voltdm->write(vc_bypass_value, vc_bypass_val_reg);
+ voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg);
+
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ /*
+ * Loop till the bypass command is acknowledged from the SMPS.
+ * NOTE: This is legacy code. The loop count and retry count needs
+ * to be revisited.
+ */
+ while (!(vc_bypass_value & vc_valid)) {
+ loop_cnt++;
+
+ if (retries_cnt > 10) {
+ pr_warning("%s: Retry count exceeded\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ if (loop_cnt > 50) {
+ retries_cnt++;
+ loop_cnt = 0;
+ udelay(10);
+ }
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ }
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+ return 0;
+}
+
+static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
+{
+ /*
+ * Voltage Manager FSM parameters init
+ * XXX This data should be passed in from the board file
+ */
+ voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
+ voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
+ voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
+}
+
+static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+
+ if (is_initialized)
+ return;
+
+ omap3_vfsm_init(voltdm);
+
+ is_initialized = true;
+}
+
+
+/* OMAP4 specific voltage init functions */
+static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+ u32 vc_val;
+
+ if (is_initialized)
+ return;
+
+ /* XXX These are magic numbers and do not belong! */
+ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
+ voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+
+ is_initialized = true;
+}
+
+/**
+ * omap_vc_i2c_init - initialize I2C interface to PMIC
+ * @voltdm: voltage domain containing VC data
+ *
+ * Use PMIC supplied seetings for I2C high-speed mode and
+ * master code (if set) and program the VC I2C configuration
+ * register.
+ *
+ * The VC I2C configuration is common to all VC channels,
+ * so this function only configures I2C for the first VC
+ * channel registers. All other VC channels will use the
+ * same configuration.
+ */
+static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ static bool initialized;
+ static bool i2c_high_speed;
+ u8 mcode;
+
+ if (initialized) {
+ if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
+ pr_warn("%s: I2C config for all channels must match.",
+ __func__);
+ return;
+ }
+
+ i2c_high_speed = voltdm->pmic->i2c_high_speed;
+ if (i2c_high_speed)
+ voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_reg);
+
+ mcode = voltdm->pmic->i2c_mcode;
+ if (mcode)
+ voltdm->rmw(vc->common->i2c_mcode_mask,
+ mcode << __ffs(vc->common->i2c_mcode_mask),
+ vc->common->i2c_cfg_reg);
+
+ initialized = true;
+}
+
+void __init omap_vc_init_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
+ u32 val;
+
+ if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC info requried to configure vc for"
+ "vdd_%s not populated.Hence cannot initialize vc\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vc->cfg_channel = 0;
+ if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT)
+ vc_cfg_bits = &vc_mutant_channel_cfg;
+ else
+ vc_cfg_bits = &vc_default_channel_cfg;
+
+ /* get PMIC/board specific settings */
+ vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
+ vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
+ vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
+ vc->setup_time = voltdm->pmic->volt_setup_time;
+
+ /* Configure the i2c slave address for this VC */
+ voltdm->rmw(vc->smps_sa_mask,
+ vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
+ vc->smps_sa_reg);
+ vc->cfg_channel |= vc_cfg_bits->sa;
+
+ /*
+ * Configure the PMIC register addresses.
+ */
+ voltdm->rmw(vc->smps_volra_mask,
+ vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
+ vc->smps_volra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rav;
+
+ if (vc->cmd_reg_addr) {
+ voltdm->rmw(vc->smps_cmdra_mask,
+ vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
+ vc->smps_cmdra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
+ }
+
+ /* Set up the on, inactive, retention and off voltage */
+ on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
+ onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
+ ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
+ off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
+ val = ((on_vsel << vc->common->cmd_on_shift) |
+ (onlp_vsel << vc->common->cmd_onlp_shift) |
+ (ret_vsel << vc->common->cmd_ret_shift) |
+ (off_vsel << vc->common->cmd_off_shift));
+ voltdm->write(val, vc->cmdval_reg);
+ vc->cfg_channel |= vc_cfg_bits->cmd;
+
+ /* Channel configuration */
+ omap_vc_config_channel(voltdm);
+
+ /* Configure the setup times */
+ voltdm->rmw(voltdm->vfsm->voltsetup_mask,
+ vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
+ voltdm->vfsm->voltsetup_reg);
+
+ omap_vc_i2c_init(voltdm);
+
+ if (cpu_is_omap34xx())
+ omap3_vc_init_channel(voltdm);
+ else if (cpu_is_omap44xx())
+ omap4_vc_init_channel(voltdm);
+}
+
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index e776777..478bf6b4 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -19,12 +19,12 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
/**
- * struct omap_vc_common_data - per-VC register/bitfield data
+ * struct omap_vc_common - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
- * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
- * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
* @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
* @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
@@ -33,15 +33,16 @@
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
+ * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
+ * @i2c_mcode_mask: MCODE field mask for I2C config register
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
-struct omap_vc_common_data {
+struct omap_vc_common {
u32 cmd_on_mask;
u32 valid;
- u8 smps_sa_reg;
- u8 smps_volra_reg;
u8 bypass_val_reg;
u8 data_shift;
u8 slaveaddr_shift;
@@ -50,34 +51,75 @@
u8 cmd_onlp_shift;
u8 cmd_ret_shift;
u8 cmd_off_shift;
+ u8 i2c_cfg_reg;
+ u8 i2c_cfg_hsen_mask;
+ u8 i2c_mcode_mask;
};
+/* omap_vc_channel.flags values */
+#define OMAP_VC_CHANNEL_DEFAULT BIT(0)
+#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1)
+
/**
- * struct omap_vc_instance_data - VC per-instance data
- * @vc_common: pointer to VC common data for this platform
- * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register
- * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
- * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register
- * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register
+ * struct omap_vc_channel - VC per-instance data
+ * @i2c_slave_addr: I2C slave address of PMIC for this VC channel
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command configuration register address
+ * @setup_time: setup time (in sys_clk cycles) of regulator for this channel
+ * @cfg_channel: current value of VC channel configuration register
+ * @i2c_high_speed: whether or not to use I2C high-speed mode
*
- * XXX It is not necessary to have both a *_mask and a *_shift -
- * remove one
+ * @common: pointer to VC common data for this platform
+ * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
+ * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
+ * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
+ * @cmdval_reg: register for on/ret/off voltage level values for this channel
+ * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
+ * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
+ * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
+ * @cfg_channel_reg: VC channel configuration register
+ * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
+ * @flags: VC channel-specific flags (optional)
*/
-struct omap_vc_instance_data {
- const struct omap_vc_common_data *vc_common;
+struct omap_vc_channel {
+ /* channel state */
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
+ u16 setup_time;
+ u8 cfg_channel;
+ bool i2c_high_speed;
+
+ /* register access data */
+ const struct omap_vc_common *common;
u32 smps_sa_mask;
u32 smps_volra_mask;
+ u32 smps_cmdra_mask;
u8 cmdval_reg;
- u8 smps_sa_shift;
- u8 smps_volra_shift;
+ u8 smps_sa_reg;
+ u8 smps_volra_reg;
+ u8 smps_cmdra_reg;
+ u8 cfg_channel_reg;
+ u8 cfg_channel_sa_shift;
+ u8 flags;
};
-extern struct omap_vc_instance_data omap3_vc1_data;
-extern struct omap_vc_instance_data omap3_vc2_data;
+extern struct omap_vc_channel omap3_vc_mpu;
+extern struct omap_vc_channel omap3_vc_core;
-extern struct omap_vc_instance_data omap4_vc_mpu_data;
-extern struct omap_vc_instance_data omap4_vc_iva_data;
-extern struct omap_vc_instance_data omap4_vc_core_data;
+extern struct omap_vc_channel omap4_vc_mpu;
+extern struct omap_vc_channel omap4_vc_iva;
+extern struct omap_vc_channel omap4_vc_core;
+
+void omap_vc_init_channel(struct voltagedomain *voltdm);
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel);
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel);
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index f37dc4b..cfe348e 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -29,9 +29,7 @@
* VC data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static struct omap_vc_common_data omap3_vc_common = {
- .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+static struct omap_vc_common omap3_vc_common = {
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
.data_shift = OMAP3430_DATA_SHIFT,
.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT,
@@ -42,22 +40,33 @@
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
+ .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
+ .i2c_mcode_mask = OMAP3430_MCODE_MASK,
};
-struct omap_vc_instance_data omap3_vc1_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_mpu = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
- .smps_volra_shift = OMAP3430_VOLRA0_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA0_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA0_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
};
-struct omap_vc_instance_data omap3_vc2_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_core = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
- .smps_volra_shift = OMAP3430_VOLRA1_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA1_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
};
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index a98da8d..2740a96 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -30,9 +30,7 @@
* VC data common to 44xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static const struct omap_vc_common_data omap4_vc_common = {
- .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+static const struct omap_vc_common omap4_vc_common = {
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
.data_shift = OMAP4430_DATA_SHIFT,
.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT,
@@ -43,33 +41,49 @@
.cmd_onlp_shift = OMAP4430_ONLP_SHIFT,
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
+ .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
+ .i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
/* VC instance data for each controllable voltage line */
-struct omap_vc_instance_data omap4_vc_mpu_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_mpu = {
+ .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT,
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_iva_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_iva = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_core_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_core = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT,
};
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 9ef3789..64070ac1 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -21,10 +21,10 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <plat/common.h>
@@ -36,839 +36,88 @@
#include "control.h"
#include "voltage.h"
+#include "powerdomain.h"
#include "vc.h"
#include "vp.h"
-#define VOLTAGE_DIR_SIZE 16
-
-
-static struct omap_vdd_info **vdd_info;
-
-/*
- * Number of scalable voltage domains.
- */
-static int nr_scalable_vdd;
-
-/* XXX document */
-static s16 prm_mod_offs;
-static s16 prm_irqst_ocp_mod_offs;
-
-static struct dentry *voltage_dir;
-
-/* Init function pointers */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt);
-
-static u32 omap3_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap2_prm_read_mod_reg(mod, offset);
-}
-
-static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap2_prm_write_mod_reg(val, mod, offset);
-}
-
-static u32 omap4_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- mod, offset);
-}
-
-static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset);
-}
-
-static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
-{
- char *sys_ck_name;
- struct clk *sys_ck;
- u32 sys_clk_speed, timeout_val, waittime;
-
- /*
- * XXX Clockfw should handle this, or this should be in a
- * struct record
- */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- sys_ck_name = "sys_ck";
- else if (cpu_is_omap44xx())
- sys_ck_name = "sys_clkin_ck";
- else
- return -EINVAL;
-
- /*
- * Sys clk rate is require to calculate vp timeout value and
- * smpswaittimemin and smpswaittimemax.
- */
- sys_ck = clk_get(NULL, sys_ck_name);
- if (IS_ERR(sys_ck)) {
- pr_warning("%s: Could not get the sys clk to calculate"
- "various vdd_%s params\n", __func__, vdd->voltdm.name);
- return -EINVAL;
- }
- sys_clk_speed = clk_get_rate(sys_ck);
- clk_put(sys_ck);
- /* Divide to avoid overflow */
- sys_clk_speed /= 1000;
-
- /* Generic voltage parameters */
- vdd->volt_scale = vp_forceupdate_scale_voltage;
- vdd->vp_enabled = false;
-
- vdd->vp_rt_data.vpconfig_erroroffset =
- (vdd->pmic_info->vp_erroroffset <<
- vdd->vp_data->vp_common->vpconfig_erroroffset_shift);
-
- timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
- vdd->vp_rt_data.vlimitto_timeout = timeout_val;
- vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
- vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
-
- waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
- sys_clk_speed) / 1000;
- vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime;
- vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime;
- vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
- vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
-
- return 0;
-}
-
-/* Voltage debugfs support */
-static int vp_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
- u8 vsel;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info->vsel_to_uv) {
- pr_warning("PMIC function to convert vsel to voltage"
- "in uV not registerd\n");
- return -EINVAL;
- }
-
- *val = vdd->pmic_info->vsel_to_uv(vsel);
- return 0;
-}
-
-static int nom_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- *val = omap_voltage_get_nom_volt(&vdd->voltdm);
-
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n");
-DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
- "%llu\n");
-static void vp_latch_vsel(struct omap_vdd_info *vdd)
-{
- u32 vpconfig;
- unsigned long uvdc;
- char vsel;
-
- uvdc = omap_voltage_get_nom_volt(&vdd->voltdm);
- if (!uvdc) {
- pr_warning("%s: unable to find current voltage for vdd_%s\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_warning("%s: PMIC function to convert voltage in uV to"
- " vsel not registered\n", __func__);
- return;
- }
-
- vsel = vdd->pmic_info->uv_to_vsel(uvdc);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask |
- vdd->vp_data->vp_common->vpconfig_initvdd);
- vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift;
-
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd),
- prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Clear initVDD copy trigger bit */
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-}
-
-/* Generic voltage init functions */
-static void __init vp_init(struct omap_vdd_info *vdd)
-{
- u32 vp_val;
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- vp_val = vdd->vp_rt_data.vpconfig_erroroffset |
- (vdd->vp_rt_data.vpconfig_errorgain <<
- vdd->vp_data->vp_common->vpconfig_errorgain_shift) |
- vdd->vp_data->vp_common->vpconfig_timeouten;
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig);
-
- vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin <<
- vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) |
- (vdd->vp_rt_data.vstepmin_stepmin <<
- vdd->vp_data->vp_common->vstepmin_stepmin_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin);
-
- vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax <<
- vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) |
- (vdd->vp_rt_data.vstepmax_stepmax <<
- vdd->vp_data->vp_common->vstepmax_stepmax_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax);
-
- vp_val = ((vdd->vp_rt_data.vlimitto_vddmax <<
- vdd->vp_data->vp_common->vlimitto_vddmax_shift) |
- (vdd->vp_rt_data.vlimitto_vddmin <<
- vdd->vp_data->vp_common->vlimitto_vddmin_shift) |
- (vdd->vp_rt_data.vlimitto_timeout <<
- vdd->vp_data->vp_common->vlimitto_timeout_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto);
-}
-
-static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
-{
- char *name;
-
- name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL);
- if (!name) {
- pr_warning("%s: Unable to allocate memory for debugfs"
- " directory name for vdd_%s",
- __func__, vdd->voltdm.name);
- return;
- }
- strcpy(name, "vdd_");
- strcat(name, vdd->voltdm.name);
-
- vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
- kfree(name);
- if (IS_ERR(vdd->debug_dir)) {
- pr_warning("%s: Unable to create debugfs directory for"
- " vdd_%s\n", __func__, vdd->voltdm.name);
- vdd->debug_dir = NULL;
- return;
- }
-
- (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vpconfig_errorgain));
- (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_smpswaittimemin));
- (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_stepmin));
- (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_smpswaittimemax));
- (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_stepmax));
- (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmax));
- (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmin));
- (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_timeout));
- (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir,
- (void *) vdd, &vp_volt_debug_fops);
- (void) debugfs_create_file("curr_nominal_volt", S_IRUGO,
- vdd->debug_dir, (void *) vdd,
- &nom_volt_debug_fops);
-}
-
-/* Voltage scale and accessory APIs */
-static int _pre_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
-{
- struct omap_volt_data *volt_data;
- const struct omap_vc_common_data *vc_common;
- const struct omap_vp_common_data *vp_common;
- u32 vc_cmdval, vp_errgain_val;
-
- vc_common = vdd->vc_data->vc_common;
- vp_common = vdd->vp_data->vp_common;
-
- /* Check if suffiecient pmic info is available for this vdd */
- if (!vdd->pmic_info) {
- pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- if (!vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC function to convert voltage in uV to"
- "vsel not registered. Hence unable to scale voltage"
- "for vdd_%s\n", __func__, vdd->voltdm.name);
- return -ENODATA;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- /* Get volt_data corresponding to target_volt */
- volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt);
- if (IS_ERR(volt_data))
- volt_data = NULL;
-
- *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- /* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg);
- vc_cmdval &= ~vc_common->cmd_on_mask;
- vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /* Setting vp errorgain based on the voltage */
- if (volt_data) {
- vp_errgain_val = vdd->read_reg(prm_mod_offs,
- vdd->vp_data->vpconfig);
- vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
- vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
- vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
- vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, prm_mod_offs,
- vdd->vp_data->vpconfig);
- }
-
- return 0;
-}
-
-static void _post_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 target_vsel, u8 current_vsel)
-{
- u32 smps_steps = 0, smps_delay = 0;
-
- smps_steps = abs(target_vsel - current_vsel);
- /* SMPS slew rate / step size. 2us added as buffer. */
- smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
- vdd->pmic_info->slew_rate) + 2;
- udelay(smps_delay);
-
- vdd->curr_volt = target_volt;
-}
-
-/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
-static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 loop_cnt = 0, retries_cnt = 0;
- u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
- u8 target_vsel, current_vsel;
- int ret;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- vc_valid = vdd->vc_data->vc_common->valid;
- vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg;
- vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) |
- (vdd->pmic_info->pmic_reg <<
- vdd->vc_data->vc_common->regaddr_shift) |
- (vdd->pmic_info->i2c_slave_addr <<
- vdd->vc_data->vc_common->slaveaddr_shift);
-
- vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs,
- vc_bypass_val_reg);
-
- vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg);
- /*
- * Loop till the bypass command is acknowledged from the SMPS.
- * NOTE: This is legacy code. The loop count and retry count needs
- * to be revisited.
- */
- while (!(vc_bypass_value & vc_valid)) {
- loop_cnt++;
-
- if (retries_cnt > 10) {
- pr_warning("%s: Retry count exceeded\n", __func__);
- return -ETIMEDOUT;
- }
-
- if (loop_cnt > 50) {
- retries_cnt++;
- loop_cnt = 0;
- udelay(10);
- }
- vc_bypass_value = vdd->read_reg(prm_mod_offs,
- vc_bypass_val_reg);
- }
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
- return 0;
-}
-
-/* VP force update method of voltage scaling */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 vpconfig;
- u8 target_vsel, current_vsel, prm_irqst_reg;
- int ret, timeout = 0;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg;
-
- /*
- * Clear all pending TransactionDone interrupt/status. Typical latency
- * is <3us
- */
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
- if (timeout >= VP_TRANXDONE_TIMEOUT) {
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
- "Voltage change aborted", __func__, vdd->voltdm.name);
- return -ETIMEDOUT;
- }
-
- /* Configure for VP-Force Update */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd |
- vdd->vp_data->vp_common->vpconfig_forceupdate |
- vdd->vp_data->vp_common->vpconfig_initvoltage_mask);
- vpconfig |= ((target_vsel <<
- vdd->vp_data->vp_common->vpconfig_initvoltage_shift));
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Force update of voltage */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for TransactionDone. Typical latency is <200us.
- * Depends on SMPSWAITTIMEMIN/MAX and voltage change
- */
- timeout = 0;
- omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status),
- VP_TRANXDONE_TIMEOUT, timeout);
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
- "TRANXDONE never got set after the voltage update\n",
- __func__, vdd->voltdm.name);
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
-
- /*
- * Disable TransactionDone interrupt , clear all status, clear
- * control registers
- */
- timeout = 0;
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
-
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
- "to clear the TRANXDONE status\n",
- __func__, vdd->voltdm.name);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear initVDD copy trigger bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear force bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- return 0;
-}
-
-static void __init omap3_vfsm_init(struct omap_vdd_info *vdd)
-{
- /*
- * Voltage Manager FSM parameters init
- * XXX This data should be passed in from the board file
- */
- vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs,
- OMAP3_PRM_VOLTSETUP2_OFFSET);
-}
-
-static void __init omap3_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* Set up the on, inactive, retention and off voltage */
- on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
- onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
- ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
- off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
- vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) |
- (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
- (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
- (off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs,
- OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs,
- OMAP3_PRM_VC_I2C_CFG_OFFSET);
-
- omap3_vfsm_init(vdd);
-
- is_initialized = true;
-}
-
-
-/* OMAP4 specific voltage init functions */
-static void __init omap4_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* TODO: Configure setup times and CMD_VAL values*/
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
- OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
- OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
-
- /* XXX These are magic numbers and do not belong! */
- vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
-
- is_initialized = true;
-}
-
-static void __init omap_vc_init(struct omap_vdd_info *vdd)
-{
- u32 vc_val;
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC info requried to configure vc for"
- "vdd_%s not populated.Hence cannot initialize vc\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- /* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
- vc_val &= ~vdd->vc_data->smps_sa_mask;
- vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
-
- /* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
- vc_val &= ~vdd->vc_data->smps_volra_mask;
- vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
-
- /* Configure the setup times */
- vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg);
- vc_val &= ~vdd->vfsm->voltsetup_mask;
- vc_val |= vdd->pmic_info->volt_setup_time <<
- vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg);
-
- if (cpu_is_omap34xx())
- omap3_vc_init(vdd);
- else if (cpu_is_omap44xx())
- omap4_vc_init(vdd);
-}
-
-static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd)
-{
- int ret = -EINVAL;
-
- if (!vdd->pmic_info) {
- pr_err("%s: PMIC info requried to configure vdd_%s not"
- "populated.Hence cannot initialize vdd_%s\n",
- __func__, vdd->voltdm.name, vdd->voltdm.name);
- goto ovdc_out;
- }
-
- if (IS_ERR_VALUE(_config_common_vdd_data(vdd)))
- goto ovdc_out;
-
- if (cpu_is_omap34xx()) {
- vdd->read_reg = omap3_voltage_read_reg;
- vdd->write_reg = omap3_voltage_write_reg;
- ret = 0;
- } else if (cpu_is_omap44xx()) {
- vdd->read_reg = omap4_voltage_read_reg;
- vdd->write_reg = omap4_voltage_write_reg;
- ret = 0;
- }
-
-ovdc_out:
- return ret;
-}
+static LIST_HEAD(voltdm_list);
/* Public functions */
/**
- * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
- * @voltdm: pointer to the VDD for which current voltage info is needed
+ * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
+ * @voltdm: pointer to the voltdm for which current voltage info is needed
*
- * API to get the current non-auto-compensated voltage for a VDD.
- * Returns 0 in case of error else returns the current voltage for the VDD.
+ * API to get the current non-auto-compensated voltage for a voltage domain.
+ * Returns 0 in case of error else returns the current voltage.
*/
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return 0;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->curr_volt;
+ return voltdm->nominal_volt;
}
/**
- * omap_vp_get_curr_volt() - API to get the current vp voltage.
- * @voltdm: pointer to the VDD.
- *
- * This API returns the current voltage for the specified voltage processor
- */
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u8 curr_vsel;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return 0;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg) {
- pr_err("%s: No read API for reading vdd_%s regs\n",
- __func__, voltdm->name);
- return 0;
- }
-
- curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
- pr_warning("%s: PMIC function to convert vsel to voltage"
- "in uV not registerd\n", __func__);
- return 0;
- }
-
- return vdd->pmic_info->vsel_to_uv(curr_vsel);
-}
-
-/**
- * omap_vp_enable() - API to enable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be enabled.
- *
- * This API enables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_enable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already enabled, do nothing. Return */
- if (vdd->vp_enabled)
- return;
-
- vp_latch_vsel(vdd);
-
- /* Enable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- vdd->vp_enabled = true;
-}
-
-/**
- * omap_vp_disable() - API to disable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be disabled.
- *
- * This API disables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_disable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
- int timeout;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already disabled, do nothing. Return */
- if (!vdd->vp_enabled) {
- pr_warning("%s: Trying to disable VP for vdd_%s when"
- "it is already disabled\n", __func__, voltdm->name);
- return;
- }
-
- /* Disable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
- */
- omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)),
- VP_IDLE_TIMEOUT, timeout);
-
- if (timeout >= VP_IDLE_TIMEOUT)
- pr_warning("%s: vdd_%s idle timedout\n",
- __func__, voltdm->name);
-
- vdd->vp_enabled = false;
-
- return;
-}
-
-/**
- * omap_voltage_scale_vdd() - API to scale voltage of a particular
- * voltage domain.
- * @voltdm: pointer to the VDD which is to be scaled.
- * @target_volt: The target voltage of the voltage domain
+ * voltdm_scale() - API to scale voltage of a particular voltage domain.
+ * @voltdm: pointer to the voltage domain which is to be scaled.
+ * @target_volt: The target voltage of the voltage domain
*
* This API should be called by the kernel to do the voltage scaling
- * for a particular voltage domain during dvfs or any other situation.
+ * for a particular voltage domain during DVFS.
*/
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt)
+int voltdm_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
{
- struct omap_vdd_info *vdd;
+ int ret;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_scale) {
+ if (!voltdm->scale) {
pr_err("%s: No voltage scale API registered for vdd_%s\n",
__func__, voltdm->name);
return -ENODATA;
}
- return vdd->volt_scale(vdd, target_volt);
+ ret = voltdm->scale(voltdm, target_volt);
+ if (!ret)
+ voltdm->nominal_volt = target_volt;
+
+ return ret;
}
/**
- * omap_voltage_reset() - Resets the voltage of a particular voltage domain
- * to that of the current OPP.
- * @voltdm: pointer to the VDD whose voltage is to be reset.
+ * voltdm_reset() - Resets the voltage of a particular voltage domain
+ * to that of the current OPP.
+ * @voltdm: pointer to the voltage domain whose voltage is to be reset.
*
* This API finds out the correct voltage the voltage domain is supposed
* to be at and resets the voltage to that level. Should be used especially
* while disabling any voltage compensation modules.
*/
-void omap_voltage_reset(struct voltagedomain *voltdm)
+void voltdm_reset(struct voltagedomain *voltdm)
{
- unsigned long target_uvdc;
+ unsigned long target_volt;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- target_uvdc = omap_voltage_get_nom_volt(voltdm);
- if (!target_uvdc) {
+ target_volt = voltdm_get_voltage(voltdm);
+ if (!target_volt) {
pr_err("%s: unable to find current voltage for vdd_%s\n",
__func__, voltdm->name);
return;
}
- omap_voltage_scale_vdd(voltdm, target_uvdc);
+ voltdm_scale(voltdm, target_volt);
}
/**
@@ -884,18 +133,14 @@
*
*/
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
- struct omap_volt_data **volt_data)
+ struct omap_volt_data **volt_data)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- *volt_data = vdd->volt_data;
+ *volt_data = voltdm->volt_data;
}
/**
@@ -914,9 +159,8 @@
* domain or if there is no matching entry.
*/
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
- unsigned long volt)
+ unsigned long volt)
{
- struct omap_vdd_info *vdd;
int i;
if (!voltdm || IS_ERR(voltdm)) {
@@ -924,17 +168,15 @@
return ERR_PTR(-EINVAL);
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_data) {
+ if (!voltdm->volt_data) {
pr_warning("%s: voltage table does not exist for vdd_%s\n",
__func__, voltdm->name);
return ERR_PTR(-ENODATA);
}
- for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) {
- if (vdd->volt_data[i].volt_nominal == volt)
- return &vdd->volt_data[i];
+ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
+ if (voltdm->volt_data[i].volt_nominal == volt)
+ return &voltdm->volt_data[i];
}
pr_notice("%s: Unable to match the current voltage with the voltage"
@@ -947,54 +189,25 @@
* omap_voltage_register_pmic() - API to register PMIC specific data
* @voltdm: pointer to the VDD for which the PMIC specific data is
* to be registered
- * @pmic_info: the structure containing pmic info
+ * @pmic: the structure containing pmic info
*
* This API is to be called by the SOC/PMIC file to specify the
- * pmic specific info as present in omap_volt_pmic_info structure.
+ * pmic specific info as present in omap_voltdm_pmic structure.
*/
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
+ struct omap_voltdm_pmic *pmic)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- vdd->pmic_info = pmic_info;
+ voltdm->pmic = pmic;
return 0;
}
/**
- * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory
- * corresponding to a voltage domain.
- *
- * @voltdm: pointer to the VDD whose debug directory is required.
- *
- * This API returns pointer to the debugfs directory corresponding
- * to the voltage domain. Should be used by drivers requiring to
- * add any debug entry for a particular voltage domain. Returns NULL
- * in case of error.
- */
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return NULL;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->debug_dir;
-}
-
-/**
* omap_change_voltscale_method() - API to change the voltage scaling method.
* @voltdm: pointer to the VDD whose voltage scaling method
* has to be changed.
@@ -1005,23 +218,19 @@
* defined in voltage.h
*/
void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method)
+ int voltscale_method)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
switch (voltscale_method) {
case VOLTSCALE_VPFORCEUPDATE:
- vdd->volt_scale = vp_forceupdate_scale_voltage;
+ voltdm->scale = omap_vp_forceupdate_scale;
return;
case VOLTSCALE_VCBYPASS:
- vdd->volt_scale = vc_bypass_scale_voltage;
+ voltdm->scale = omap_vc_bypass_scale;
return;
default:
pr_warning("%s: Trying to change the method of voltage scaling"
@@ -1030,38 +239,6 @@
}
/**
- * omap_voltage_domain_lookup() - API to get the voltage domain pointer
- * @name: Name of the voltage domain
- *
- * This API looks up in the global vdd_info struct for the
- * existence of voltage domain <name>. If it exists, the API returns
- * a pointer to the voltage domain structure corresponding to the
- * VDD<name>. Else retuns error pointer.
- */
-struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- int i;
-
- if (!vdd_info) {
- pr_err("%s: Voltage driver init not yet happened.Faulting!\n",
- __func__);
- return ERR_PTR(-EINVAL);
- }
-
- if (!name) {
- pr_err("%s: No name to get the votage domain!\n", __func__);
- return ERR_PTR(-EINVAL);
- }
-
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (!(strcmp(name, vdd_info[i]->voltdm.name)))
- return &vdd_info[i]->voltdm;
- }
-
- return ERR_PTR(-EINVAL);
-}
-
-/**
* omap_voltage_late_init() - Init the various voltage parameters
*
* This API is to be called in the later stages of the
@@ -1070,37 +247,184 @@
*/
int __init omap_voltage_late_init(void)
{
- int i;
+ struct voltagedomain *voltdm;
- if (!vdd_info) {
+ if (list_empty(&voltdm_list)) {
pr_err("%s: Voltage driver support not added\n",
__func__);
return -EINVAL;
}
- voltage_dir = debugfs_create_dir("voltage", NULL);
- if (IS_ERR(voltage_dir))
- pr_err("%s: Unable to create voltage debugfs main dir\n",
- __func__);
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (omap_vdd_data_configure(vdd_info[i]))
+ list_for_each_entry(voltdm, &voltdm_list, node) {
+ struct clk *sys_ck;
+
+ if (!voltdm->scalable)
continue;
- omap_vc_init(vdd_info[i]);
- vp_init(vdd_info[i]);
- vdd_debugfs_init(vdd_info[i]);
+
+ sys_ck = clk_get(NULL, voltdm->sys_clk.name);
+ if (IS_ERR(sys_ck)) {
+ pr_warning("%s: Could not get sys clk.\n", __func__);
+ return -EINVAL;
+ }
+ voltdm->sys_clk.rate = clk_get_rate(sys_ck);
+ WARN_ON(!voltdm->sys_clk.rate);
+ clk_put(sys_ck);
+
+ if (voltdm->vc) {
+ voltdm->scale = omap_vc_bypass_scale;
+ omap_vc_init_channel(voltdm);
+ }
+
+ if (voltdm->vp) {
+ voltdm->scale = omap_vp_forceupdate_scale;
+ omap_vp_init(voltdm);
+ }
}
return 0;
}
-/* XXX document */
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count)
+static struct voltagedomain *_voltdm_lookup(const char *name)
{
- prm_mod_offs = prm_mod;
- prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod;
- vdd_info = omap_vdd_array;
- nr_scalable_vdd = omap_vdd_count;
+ struct voltagedomain *voltdm, *temp_voltdm;
+
+ voltdm = NULL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ if (!strcmp(name, temp_voltdm->name)) {
+ voltdm = temp_voltdm;
+ break;
+ }
+ }
+
+ return voltdm;
+}
+
+/**
+ * voltdm_add_pwrdm - add a powerdomain to a voltagedomain
+ * @voltdm: struct voltagedomain * to add the powerdomain to
+ * @pwrdm: struct powerdomain * to associate with a voltagedomain
+ *
+ * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This
+ * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if
+ * presented with invalid pointers; -ENOMEM if memory could not be allocated;
+ * or 0 upon success.
+ */
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)
+{
+ if (!voltdm || !pwrdm)
+ return -EINVAL;
+
+ pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
+ "%s\n", pwrdm->name, voltdm->name);
+
+ list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
+
return 0;
}
+
+/**
+ * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm
+ * @voltdm: struct voltagedomain * to iterate over
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each powerdomain in the
+ * voltagedomain @voltdm. Returns -EINVAL if presented with invalid
+ * pointers; or passes along the last return value of the callback
+ * function, which should be 0 for success or anything else to
+ * indicate failure.
+ */
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm))
+{
+ struct powerdomain *pwrdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node)
+ ret = (*fn)(voltdm, pwrdm);
+
+ return ret;
+}
+
+/**
+ * voltdm_for_each - call function on each registered voltagedomain
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each registered voltagedomain.
+ * The callback function @fn can return anything but 0 to bail out
+ * early from the iterator. Returns the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure; or -EINVAL if the function pointer is null.
+ */
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user)
+{
+ struct voltagedomain *temp_voltdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ ret = (*fn)(temp_voltdm, user);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int _voltdm_register(struct voltagedomain *voltdm)
+{
+ if (!voltdm || !voltdm->name)
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&voltdm->pwrdm_list);
+ list_add(&voltdm->node, &voltdm_list);
+
+ pr_debug("voltagedomain: registered %s\n", voltdm->name);
+
+ return 0;
+}
+
+/**
+ * voltdm_lookup - look up a voltagedomain by name, return a pointer
+ * @name: name of voltagedomain
+ *
+ * Find a registered voltagedomain by its name @name. Returns a pointer
+ * to the struct voltagedomain if found, or NULL otherwise.
+ */
+struct voltagedomain *voltdm_lookup(const char *name)
+{
+ struct voltagedomain *voltdm ;
+
+ if (!name)
+ return NULL;
+
+ voltdm = _voltdm_lookup(name);
+
+ return voltdm;
+}
+
+/**
+ * voltdm_init - set up the voltagedomain layer
+ * @voltdm_list: array of struct voltagedomain pointers to register
+ *
+ * Loop through the array of voltagedomains @voltdm_list, registering all
+ * that are available on the current CPU. If voltdm_list is supplied
+ * and not null, all of the referenced voltagedomains will be
+ * registered. No return value.
+ */
+void voltdm_init(struct voltagedomain **voltdms)
+{
+ struct voltagedomain **v;
+
+ if (voltdms) {
+ for (v = voltdms; *v; v++)
+ _voltdm_register(*v);
+ }
+}
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index e9f5408..16a1b09 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -19,6 +19,8 @@
#include "vc.h"
#include "vp.h"
+struct powerdomain;
+
/* XXX document */
#define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2
@@ -32,29 +34,60 @@
#define OMAP3_VOLTSETUP2 0xff
/**
- * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield
+ * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield
* data
* @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
* @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
- * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register
*
* XXX What about VOLTOFFSET/VOLTCTRL?
- * XXX It is not necessary to have both a _mask and a _shift for the same
- * bitfield - remove one!
*/
-struct omap_vfsm_instance_data {
+struct omap_vfsm_instance {
u32 voltsetup_mask;
u8 voltsetup_reg;
- u8 voltsetup_shift;
};
/**
* struct voltagedomain - omap voltage domain global structure.
- * @name: Name of the voltage domain which can be used as a unique
- * identifier.
+ * @name: Name of the voltage domain which can be used as a unique identifier.
+ * @scalable: Whether or not this voltage domain is scalable
+ * @node: list_head linking all voltage domains
+ * @pwrdm_list: list_head linking all powerdomains in this voltagedomain
+ * @vc: pointer to VC channel associated with this voltagedomain
+ * @vp: pointer to VP associated with this voltagedomain
+ * @read: read a VC/VP register
+ * @write: write a VC/VP register
+ * @read: read-modify-write a VC/VP register
+ * @sys_clk: system clock name/frequency, used for various timing calculations
+ * @scale: function used to scale the voltage of the voltagedomain
+ * @nominal_volt: current nominal voltage for this voltage domain
+ * @volt_data: voltage table having the distinct voltages supported
+ * by the domain and other associated per voltage data.
*/
struct voltagedomain {
char *name;
+ bool scalable;
+ struct list_head node;
+ struct list_head pwrdm_list;
+ struct omap_vc_channel *vc;
+ const struct omap_vfsm_instance *vfsm;
+ struct omap_vp_instance *vp;
+ struct omap_voltdm_pmic *pmic;
+
+ /* VC/VP register access functions: SoC specific */
+ u32 (*read) (u8 offset);
+ void (*write) (u32 val, u8 offset);
+ u32 (*rmw)(u32 mask, u32 bits, u8 offset);
+
+ union {
+ const char *name;
+ u32 rate;
+ } sys_clk;
+
+ int (*scale) (struct voltagedomain *voltdm,
+ unsigned long target_volt);
+
+ u32 nominal_volt;
+ struct omap_volt_data *volt_data;
};
/**
@@ -77,13 +110,18 @@
};
/**
- * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
+ * @i2c_slave_addr: I2C slave address of PMIC
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
+ * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC
+ * @i2c_mcode: master code value for I2C high-speed preamble transmission
* @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
* @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
*/
-struct omap_volt_pmic_info {
+struct omap_voltdm_pmic {
int slew_rate;
int step_size;
u32 on_volt;
@@ -91,94 +129,44 @@
u32 ret_volt;
u32 off_volt;
u16 volt_setup_time;
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
u8 vp_erroroffset;
u8 vp_vstepmin;
u8 vp_vstepmax;
u8 vp_vddmin;
u8 vp_vddmax;
u8 vp_timeout_us;
- u8 i2c_slave_addr;
- u8 pmic_reg;
+ bool i2c_high_speed;
+ u8 i2c_mcode;
unsigned long (*vsel_to_uv) (const u8 vsel);
u8 (*uv_to_vsel) (unsigned long uV);
};
-/**
- * omap_vdd_info - Per Voltage Domain info
- *
- * @volt_data : voltage table having the distinct voltages supported
- * by the domain and other associated per voltage data.
- * @pmic_info : pmic specific parameters which should be populted by
- * the pmic drivers.
- * @vp_data : the register values, shifts, masks for various
- * vp registers
- * @vp_rt_data : VP data derived at runtime, not predefined
- * @vc_data : structure containing various various vc registers,
- * shifts, masks etc.
- * @vfsm : voltage manager FSM data
- * @voltdm : pointer to the voltage domain structure
- * @debug_dir : debug directory for this voltage domain.
- * @curr_volt : current voltage for this vdd.
- * @vp_enabled : flag to keep track of whether vp is enabled or not
- * @volt_scale : API to scale the voltage of the vdd.
- */
-struct omap_vdd_info {
- struct omap_volt_data *volt_data;
- struct omap_volt_pmic_info *pmic_info;
- struct omap_vp_instance_data *vp_data;
- struct omap_vp_runtime_data vp_rt_data;
- struct omap_vc_instance_data *vc_data;
- const struct omap_vfsm_instance_data *vfsm;
- struct voltagedomain voltdm;
- struct dentry *debug_dir;
- u32 curr_volt;
- bool vp_enabled;
- u32 (*read_reg) (u16 mod, u8 offset);
- void (*write_reg) (u32 val, u16 mod, u8 offset);
- int (*volt_scale) (struct omap_vdd_info *vdd,
- unsigned long target_volt);
-};
-
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
-void omap_vp_enable(struct voltagedomain *voltdm);
-void omap_vp_disable(struct voltagedomain *voltdm);
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt);
-void omap_voltage_reset(struct voltagedomain *voltdm);
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
struct omap_volt_data **volt_data);
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count);
-#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info);
+ struct omap_voltdm_pmic *pmic);
void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method);
-/* API to get the voltagedomain pointer */
-struct voltagedomain *omap_voltage_domain_lookup(char *name);
-
int omap_voltage_late_init(void);
-#else
-static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
-{
- return -EINVAL;
-}
-static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method) {}
-static inline int omap_voltage_late_init(void)
-{
- return -EINVAL;
-}
-static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
+extern void omap2xxx_voltagedomains_init(void);
+extern void omap3xxx_voltagedomains_init(void);
+extern void omap44xx_voltagedomains_init(void);
+
+struct voltagedomain *voltdm_lookup(const char *name);
+void voltdm_init(struct voltagedomain **voltdm_list);
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user);
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm));
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+void voltdm_reset(struct voltagedomain *voltdm);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
#endif
diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
new file mode 100644
index 0000000..7a41349
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
@@ -0,0 +1,32 @@
+/*
+ * OMAP3 voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain omap2_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain omap2_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap2[] __initdata = {
+ &omap2_voltdm_core,
+ &omap2_voltdm_wkup,
+ NULL,
+};
+
+void __init omap2xxx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_omap2);
+}
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index def230f..071101d 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -31,65 +31,70 @@
* VDD data
*/
-static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd1_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK,
};
-static struct omap_vdd_info omap3_vdd1_info = {
- .vp_data = &omap3_vp1_data,
- .vc_data = &omap3_vc1_data,
- .vfsm = &omap3_vdd1_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd2_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK,
};
-static struct omap_vdd_info omap3_vdd2_info = {
- .vp_data = &omap3_vp2_data,
- .vc_data = &omap3_vc2_data,
- .vfsm = &omap3_vdd2_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap3_voltdm_mpu = {
+ .name = "mpu_iva",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_mpu,
+ .vfsm = &omap3_vdd1_vfsm,
+ .vp = &omap3_vp_mpu,
};
-/* OMAP3 VDD structures */
-static struct omap_vdd_info *omap3_vdd_info[] = {
- &omap3_vdd1_info,
- &omap3_vdd2_info,
+static struct voltagedomain omap3_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_core,
+ .vfsm = &omap3_vdd2_vfsm,
+ .vp = &omap3_vp_core,
};
-/* OMAP3 specific voltage init functions */
-static int __init omap3xxx_voltage_early_init(void)
+static struct voltagedomain omap3_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap3[] __initdata = {
+ &omap3_voltdm_mpu,
+ &omap3_voltdm_core,
+ &omap3_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_ck";
+
+void __init omap3xxx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP3430_GR_MOD;
- s16 prm_irqst_ocp_mod = OCP_MOD;
-
- if (!cpu_is_omap34xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
if (cpu_is_omap3630()) {
- omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
} else {
- omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap3_vdd_info,
- ARRAY_SIZE(omap3_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap3);
};
-core_initcall(omap3xxx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index cb64996..c4584e9 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -32,71 +32,80 @@
#include "vc.h"
#include "vp.h"
-static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_mpu_info = {
- .vp_data = &omap4_vp_mpu_data,
- .vc_data = &omap4_vc_mpu_data,
- .vfsm = &omap4_vdd_mpu_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_iva_info = {
- .vp_data = &omap4_vp_iva_data,
- .vc_data = &omap4_vc_iva_data,
- .vfsm = &omap4_vdd_iva_vfsm_data,
- .voltdm = {
- .name = "iva",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_core_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_core_info = {
- .vp_data = &omap4_vp_core_data,
- .vc_data = &omap4_vc_core_data,
- .vfsm = &omap4_vdd_core_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap4_voltdm_mpu = {
+ .name = "mpu",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_mpu,
+ .vfsm = &omap4_vdd_mpu_vfsm,
+ .vp = &omap4_vp_mpu,
};
-/* OMAP4 VDD structures */
-static struct omap_vdd_info *omap4_vdd_info[] = {
- &omap4_vdd_mpu_info,
- &omap4_vdd_iva_info,
- &omap4_vdd_core_info,
+static struct voltagedomain omap4_voltdm_iva = {
+ .name = "iva",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_iva,
+ .vfsm = &omap4_vdd_iva_vfsm,
+ .vp = &omap4_vp_iva,
};
-/* OMAP4 specific voltage init functions */
-static int __init omap44xx_voltage_early_init(void)
+static struct voltagedomain omap4_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_core,
+ .vfsm = &omap4_vdd_core_vfsm,
+ .vp = &omap4_vp_core,
+};
+
+static struct voltagedomain omap4_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap4[] __initdata = {
+ &omap4_voltdm_mpu,
+ &omap4_voltdm_iva,
+ &omap4_voltdm_core,
+ &omap4_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_clkin_ck";
+
+void __init omap44xx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
- s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
-
- if (!cpu_is_omap44xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
- omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data;
- omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
- omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
+ omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
+ omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
+ omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap4_vdd_info,
- ARRAY_SIZE(omap4_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap4);
};
-core_initcall(omap44xx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
new file mode 100644
index 0000000..66bd700
--- /dev/null
+++ b/arch/arm/mach-omap2/vp.c
@@ -0,0 +1,278 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <plat/common.h>
+
+#include "voltage.h"
+#include "vp.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ char vsel;
+
+ vsel = voltdm->pmic->uv_to_vsel(volt);
+
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~(vp->common->vpconfig_initvoltage_mask |
+ vp->common->vpconfig_forceupdate |
+ vp->common->vpconfig_initvdd);
+ vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask);
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /* Trigger initVDD value copy to voltage processor */
+ voltdm->write((vpconfig | vp->common->vpconfig_initvdd),
+ vp->vpconfig);
+
+ /* Clear initVDD copy trigger bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return vpconfig;
+}
+
+/* Generic voltage init functions */
+void __init omap_vp_init(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 val, sys_clk_rate, timeout, waittime;
+ u32 vddmin, vddmax, vstepmin, vstepmax;
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vp->enabled = false;
+
+ /* Divide to avoid overflow */
+ sys_clk_rate = voltdm->sys_clk.rate / 1000;
+
+ timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
+ vddmin = voltdm->pmic->vp_vddmin;
+ vddmax = voltdm->pmic->vp_vddmax;
+
+ waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
+ sys_clk_rate) / 1000;
+ vstepmin = voltdm->pmic->vp_vstepmin;
+ vstepmax = voltdm->pmic->vp_vstepmax;
+
+ /*
+ * VP_CONFIG: error gain is not set here, it will be updated
+ * on each scale, based on OPP.
+ */
+ val = (voltdm->pmic->vp_erroroffset <<
+ __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) |
+ vp->common->vpconfig_timeouten;
+ voltdm->write(val, vp->vpconfig);
+
+ /* VSTEPMIN */
+ val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) |
+ (vstepmin << vp->common->vstepmin_stepmin_shift);
+ voltdm->write(val, vp->vstepmin);
+
+ /* VSTEPMAX */
+ val = (vstepmax << vp->common->vstepmax_stepmax_shift) |
+ (waittime << vp->common->vstepmax_smpswaittimemax_shift);
+ voltdm->write(val, vp->vstepmax);
+
+ /* VLIMITTO */
+ val = (vddmax << vp->common->vlimitto_vddmax_shift) |
+ (vddmin << vp->common->vlimitto_vddmin_shift) |
+ (timeout << vp->common->vlimitto_timeout_shift);
+ voltdm->write(val, vp->vlimitto);
+}
+
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_volt_data *volt_data;
+
+ if (!voltdm->vp)
+ return -EINVAL;
+
+ /* Get volt_data corresponding to target_volt */
+ volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
+ if (IS_ERR(volt_data))
+ return -EINVAL;
+
+ /* Setting vp errorgain based on the voltage */
+ voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask,
+ volt_data->vp_errgain <<
+ __ffs(voltdm->vp->common->vpconfig_errorgain_mask),
+ voltdm->vp->vpconfig);
+
+ return 0;
+}
+
+/* VP force update method of voltage scaling */
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ u8 target_vsel, current_vsel;
+ int ret, timeout = 0;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ /*
+ * Clear all pending TransactionDone interrupt/status. Typical latency
+ * is <3us
+ */
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+ if (timeout >= VP_TRANXDONE_TIMEOUT) {
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
+ "Voltage change aborted", __func__, voltdm->name);
+ return -ETIMEDOUT;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, target_volt);
+
+ /* Force update of voltage */
+ voltdm->write(vpconfig | vp->common->vpconfig_forceupdate,
+ voltdm->vp->vpconfig);
+
+ /*
+ * Wait for TransactionDone. Typical latency is <200us.
+ * Depends on SMPSWAITTIMEMIN/MAX and voltage change
+ */
+ timeout = 0;
+ omap_test_timeout(vp->common->ops->check_txdone(vp->id),
+ VP_TRANXDONE_TIMEOUT, timeout);
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
+ "TRANXDONE never got set after the voltage update\n",
+ __func__, voltdm->name);
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+
+ /*
+ * Disable TransactionDone interrupt , clear all status, clear
+ * control registers
+ */
+ timeout = 0;
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
+ "to clear the TRANXDONE status\n",
+ __func__, voltdm->name);
+
+ /* Clear force bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return 0;
+}
+
+/**
+ * omap_vp_enable() - API to enable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be enabled.
+ *
+ * This API enables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_enable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig, volt;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already enabled, do nothing. Return */
+ if (vp->enabled)
+ return;
+
+ volt = voltdm_get_voltage(voltdm);
+ if (!volt) {
+ pr_warning("%s: unable to find current voltage for %s\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, volt);
+
+ /* Enable VP */
+ vpconfig |= vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ vp->enabled = true;
+}
+
+/**
+ * omap_vp_disable() - API to disable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be disabled.
+ *
+ * This API disables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_disable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig;
+ int timeout;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already disabled, do nothing. Return */
+ if (!vp->enabled) {
+ pr_warning("%s: Trying to disable VP for vdd_%s when"
+ "it is already disabled\n", __func__, voltdm->name);
+ return;
+ }
+
+ /* Disable VP */
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /*
+ * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
+ */
+ omap_test_timeout((voltdm->read(vp->vstatus)),
+ VP_IDLE_TIMEOUT, timeout);
+
+ if (timeout >= VP_IDLE_TIMEOUT)
+ pr_warning("%s: vdd_%s idle timedout\n",
+ __func__, voltdm->name);
+
+ vp->enabled = false;
+
+ return;
+}
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 7ce134f..7c155d2 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -19,44 +19,60 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID 0
+#define OMAP3_VP_VDD_CORE_ID 1
+#define OMAP4_VP_VDD_CORE_ID 0
+#define OMAP4_VP_VDD_IVA_ID 1
+#define OMAP4_VP_VDD_MPU_ID 2
+
/* XXX document */
#define VP_IDLE_TIMEOUT 200
#define VP_TRANXDONE_TIMEOUT 300
+/**
+ * struct omap_vp_ops - per-VP operations
+ * @check_txdone: check for VP transaction done
+ * @clear_txdone: clear VP transaction done status
+ */
+struct omap_vp_ops {
+ u32 (*check_txdone)(u8 vp_id);
+ void (*clear_txdone)(u8 vp_id);
+};
/**
- * struct omap_vp_common_data - register data common to all VDDs
+ * struct omap_vp_common - register data common to all VDDs
+ * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
+ * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg
* @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg
- * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
- * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
- * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
- * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
- * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
- *
- * XXX It it not necessary to have both a mask and a shift for the same
- * bitfield - remove one
- * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix!
+ * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
+ * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
+ * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
+ * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
+ * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg
*/
-struct omap_vp_common_data {
+struct omap_vp_common {
+ u32 vpconfig_erroroffset_mask;
u32 vpconfig_errorgain_mask;
u32 vpconfig_initvoltage_mask;
- u32 vpconfig_timeouten;
- u32 vpconfig_initvdd;
- u32 vpconfig_forceupdate;
- u32 vpconfig_vpenable;
- u8 vpconfig_erroroffset_shift;
- u8 vpconfig_errorgain_shift;
- u8 vpconfig_initvoltage_shift;
+ u8 vpconfig_timeouten;
+ u8 vpconfig_initvdd;
+ u8 vpconfig_forceupdate;
+ u8 vpconfig_vpenable;
u8 vstepmin_stepmin_shift;
u8 vstepmin_smpswaittimemin_shift;
u8 vstepmax_stepmax_shift;
@@ -64,80 +80,49 @@
u8 vlimitto_vddmin_shift;
u8 vlimitto_vddmax_shift;
u8 vlimitto_timeout_shift;
+ u8 vpvoltage_mask;
+
+ const struct omap_vp_ops *ops;
};
/**
- * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data
- * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- *
- * XXX prm_irqst_reg does not belong here
- * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a
- * hardware bug
- * XXX This structure is probably not needed
- */
-struct omap_vp_prm_irqst_data {
- u8 prm_irqst_reg;
- u32 tranxdone_status;
-};
-
-/**
- * struct omap_vp_instance_data - VP register offsets (per-VDD)
- * @vp_common: pointer to struct omap_vp_common_data * for this SoC
- * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD
+ * struct omap_vp_instance - VP register offsets (per-VDD)
+ * @common: pointer to struct omap_vp_common * for this SoC
* @vpconfig: PRM_VP*_CONFIG reg offset from PRM start
* @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start
* @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start
* @vstatus: PRM_VP*_VSTATUS reg offset from PRM start
* @voltage: PRM_VP*_VOLTAGE reg offset from PRM start
+ * @id: Unique identifier for VP instance.
+ * @enabled: flag to keep track of whether vp is enabled or not
*
* XXX vp_common is probably not needed since it is per-SoC
*/
-struct omap_vp_instance_data {
- const struct omap_vp_common_data *vp_common;
- const struct omap_vp_prm_irqst_data *prm_irqst_data;
+struct omap_vp_instance {
+ const struct omap_vp_common *common;
u8 vpconfig;
u8 vstepmin;
u8 vstepmax;
u8 vlimitto;
u8 vstatus;
u8 voltage;
+ u8 id;
+ bool enabled;
};
-/**
- * struct omap_vp_runtime_data - VP data populated at runtime by code
- * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG
- * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG
- * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO
- * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO
- * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO
- *
- * XXX Is this structure really needed? Why not just program the
- * device directly? They are in PRM space, therefore in the WKUP
- * powerdomain, so register contents should not be lost in off-mode.
- * XXX Some of these fields are incorrectly named, e.g., vstep*
- */
-struct omap_vp_runtime_data {
- u32 vpconfig_erroroffset;
- u16 vpconfig_errorgain;
- u16 vstepmin_smpswaittimemin;
- u16 vstepmax_smpswaittimemax;
- u16 vlimitto_timeout;
- u8 vstepmin_stepmin;
- u8 vstepmax_stepmax;
- u8 vlimitto_vddmin;
- u8 vlimitto_vddmax;
-};
+extern struct omap_vp_instance omap3_vp_mpu;
+extern struct omap_vp_instance omap3_vp_core;
-extern struct omap_vp_instance_data omap3_vp1_data;
-extern struct omap_vp_instance_data omap3_vp2_data;
+extern struct omap_vp_instance omap4_vp_mpu;
+extern struct omap_vp_instance omap4_vp_iva;
+extern struct omap_vp_instance omap4_vp_core;
-extern struct omap_vp_instance_data omap4_vp_mpu_data;
-extern struct omap_vp_instance_data omap4_vp_iva_data;
-extern struct omap_vp_instance_data omap4_vp_core_data;
+void omap_vp_init(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 6452170..260c554 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -25,16 +25,20 @@
#include "voltage.h"
#include "vp.h"
+#include "prm2xxx_3xxx.h"
+
+static const struct omap_vp_ops omap3_vp_ops = {
+ .check_txdone = omap3_prm_vp_check_txdone,
+ .clear_txdone = omap3_prm_vp_clear_txdone,
+};
/*
* VP data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap3_vp_common = {
- .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap3_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP3430_INITVDD_MASK,
@@ -47,36 +51,29 @@
.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK,
+
+ .ops = &omap3_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp1_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_mpu = {
+ .id = OMAP3_VP_VDD_MPU_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp1_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp2_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_core = {
+ .id = OMAP3_VP_VDD_CORE_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp2_prm_irqst_data,
};
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 65d1ad6..b4e7704 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -27,15 +27,18 @@
#include "vp.h"
+static const struct omap_vp_ops omap4_vp_ops = {
+ .check_txdone = omap4_prm_vp_check_txdone,
+ .clear_txdone = omap4_prm_vp_clear_txdone,
+};
+
/*
* VP data common to 44xx chips
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap4_vp_common = {
- .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap4_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP4430_INITVDD_MASK,
@@ -48,53 +51,39 @@
.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK,
+ .ops = &omap4_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
- .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_mpu_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_mpu = {
+ .id = OMAP4_VP_VDD_MPU_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_iva_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_iva = {
+ .id = OMAP4_VP_VDD_IVA_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_iva_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_core_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_core = {
+ .id = OMAP4_VP_VDD_CORE_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_core_prm_irqst_data,
};
-
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf..8c83009 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@
#ifdef CONFIG_MACH_D2NET
MACHINE_START(D2NET, "LaCie d2 Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -348,7 +348,7 @@
#ifdef CONFIG_MACH_BIGDISK
MACHINE_START(BIGDISK, "LaCie Big Disk Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index a3e3e9e..4b79a80 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -9,7 +9,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -359,7 +358,7 @@
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f5281_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index c105556..343f60e 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -13,7 +13,7 @@
* License, or (at your option) any later version.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -30,7 +30,6 @@
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -730,7 +729,7 @@
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(DNS323, "D-Link DNS-323")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dns323_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0..70a4e92 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
/* Maintainer: Christopher Moore <moore@free.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = edmini_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 5e3bf5b..f340ed8 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
#include <mach/orion5x.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =ORION5X_REGS_PHYS_BASE
ldr \rv, =ORION5X_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
deleted file mode 100644
index 6769917..0000000
--- a/arch/arm/mach-orion5x/include/mach/memory.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 43cf8bc..b1b45ff 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -9,12 +9,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 0038124..d3cd3f6 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -380,7 +379,7 @@
#ifdef CONFIG_MACH_KUROBOX_PRO
MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -393,7 +392,7 @@
#ifdef CONFIG_MACH_LINKSTATION_PRO
MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803c..9503fff 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@
MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lschl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a..ed6d772 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@
MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ls_hgl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723..743f7f1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@
#ifdef CONFIG_MACH_LINKSTATION_MINI
MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lsmini_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index ef3bb8e..6020e26b 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@
MACHINE_START(MSS2, "Maxtor Shared Storage II")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mss2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 63ff10c..201ae36 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -7,7 +7,7 @@
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/i2c.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include "common.h"
@@ -229,7 +228,7 @@
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(MV2120, "HP Media Vault mv2120")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv2120_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39c..6197c79 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(NET2BIG, "LaCie 2Big Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 291d22b..ebd6767 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -18,7 +18,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
@@ -169,7 +168,7 @@
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 3f02362e..05db2d3 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
@@ -181,7 +180,7 @@
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 27fd38e..e47fa05 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -9,7 +9,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
@@ -306,7 +305,7 @@
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ad2eba9..6431725 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
@@ -122,7 +121,7 @@
MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6183ap_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index a34e4fa..29f1526 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -358,7 +357,7 @@
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = tsp2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c983161..31e51f9 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -23,7 +23,6 @@
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -323,7 +322,7 @@
MACHINE_START(TS209, "QNAP TS-109/TS-209")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts209_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cc33b22..0fbcc14 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -11,7 +11,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -25,7 +25,6 @@
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -312,7 +311,7 @@
MACHINE_START(TS409, "QNAP TS-409")
/* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts409_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b541..6c75cd3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 2653595..b8be7d8 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -5,7 +5,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -17,7 +17,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -173,7 +172,7 @@
MACHINE_START(WNR854T, "Netgear WNR854T")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wnr854t_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 251ef15..faf81a0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -5,7 +5,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -261,7 +260,7 @@
MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wrt350n_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
new file mode 100644
index 0000000..c550b63
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -0,0 +1,3 @@
+obj-y := common.o
+obj-y += time.o
+obj-y += io.o
diff --git a/arch/arm/mach-picoxcell/Makefile.boot b/arch/arm/mach-picoxcell/Makefile.boot
new file mode 100644
index 0000000..b327175
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
new file mode 100644
index 0000000..34d0834
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+static void __init picoxcell_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *picoxcell_dt_match[] = {
+ "picochip,pc3x2",
+ "picochip,pc3x3",
+ NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,pl192-vic" },
+ { /* Sentinel */ }
+};
+
+static void __init picoxcell_init_irq(void)
+{
+ vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
+ vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+}
+
+DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
+ .map_io = picoxcell_map_io,
+ .nr_irqs = ARCH_NR_IRQS,
+ .init_irq = picoxcell_init_irq,
+ .timer = &picoxcell_timer,
+ .init_machine = picoxcell_init_machine,
+ .dt_compat = picoxcell_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
new file mode 100644
index 0000000..5263f0f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#ifndef __PICOXCELL_COMMON_H__
+#define __PICOXCELL_COMMON_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer picoxcell_timer;
+extern void picoxcell_map_io(void);
+
+#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
new file mode 100644
index 0000000..8f2c234
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#define UART_SHIFT 2
+
+ .macro addruart, rp, rv
+ ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+ ldr \rp, =PICOXCELL_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
new file mode 100644
index 0000000..a6b09f7
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -0,0 +1,19 @@
+/*
+ * entry-macro.S
+ *
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Low-level IRQ helper macros for picoXcell platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE)
+#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE)
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-picoxcell/include/mach/gpio.h
similarity index 100%
copy from arch/um/include/asm/ftrace.h
copy to arch/arm/mach-picoxcell/include/mach/gpio.h
diff --git a/arch/arm/mach-picoxcell/include/mach/hardware.h b/arch/arm/mach-picoxcell/include/mach/hardware.h
new file mode 100644
index 0000000..70ff581
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/picoxcell_soc.h>
+
+#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/io.h b/arch/arm/mach-picoxcell/include/mach/io.h
new file mode 100644
index 0000000..7573ec7
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No ioports, but needed for driver compatibility. */
+#define __io(a) __typesafe_io(a)
+/* No PCI possible on picoxcell. */
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h
new file mode 100644
index 0000000..4d13ed97
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/irqs.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_IRQS 64
+#define NR_IRQS (128 + ARCH_NR_IRQS)
+
+#define IRQ_VIC0_BASE 0
+#define IRQ_VIC1_BASE 32
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-picoxcell/include/mach/map.h
new file mode 100644
index 0000000..c06afad
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/map.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_MAP_H__
+#define __PICOXCELL_MAP_H__
+
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+
+#ifdef __ASSEMBLY__
+#define IO_ADDRESS(x) PHYS_TO_IO((x))
+#else
+#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
+#endif
+
+#endif /* __PICOXCELL_MAP_H__ */
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-picoxcell/include/mach/memory.h
similarity index 100%
copy from arch/um/include/asm/ftrace.h
copy to arch/arm/mach-picoxcell/include/mach/memory.h
diff --git a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
new file mode 100644
index 0000000..5566fc8
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_SOC_H__
+#define __PICOXCELL_SOC_H__
+
+#define PICOXCELL_UART1_BASE 0x80230000
+#define PICOXCELL_PERIPH_BASE 0x80000000
+#define PICOXCELL_PERIPH_LENGTH SZ_4M
+#define PICOXCELL_VIC0_BASE 0x80060000
+#define PICOXCELL_VIC1_BASE 0x80064000
+
+#endif /* __PICOXCELL_SOC_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
new file mode 100644
index 0000000..67c589b
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching and wait for interrupt
+ * tricks.
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(int mode, const char *cmd)
+{
+ /* Watchdog reset to go here. */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/timex.h b/arch/arm/mach-picoxcell/include/mach/timex.h
new file mode 100644
index 0000000..6c540a6
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __TIMEX_H__
+#define __TIMEX_H__
+
+/* Bogus value to allow the kernel to compile. */
+#define CLOCK_TICK_RATE 1000000
+
+#endif /* __TIMEX_H__ */
+
diff --git a/arch/arm/mach-picoxcell/include/mach/uncompress.h b/arch/arm/mach-picoxcell/include/mach/uncompress.h
new file mode 100644
index 0000000..b60b19d
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
new file mode 100644
index 0000000..0216cc4
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c
new file mode 100644
index 0000000..39e9b9e
--- /dev/null
+++ b/arch/arm/mach-picoxcell/io.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+void __init picoxcell_map_io(void)
+{
+ struct map_desc io_map = {
+ .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+ .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+ .length = PICOXCELL_PERIPH_LENGTH,
+ .type = MT_DEVICE,
+ };
+
+ iotable_init(&io_map, 1);
+}
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
new file mode 100644
index 0000000..90a554f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/time.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+#include "common.h"
+
+static void timer_get_base_and_rate(struct device_node *np,
+ void __iomem **base, u32 *rate)
+{
+ *base = of_iomap(np, 0);
+
+ if (!*base)
+ panic("Unable to map regs for %s", np->name);
+
+ if (of_property_read_u32(np, "clock-freq", rate))
+ panic("No clock-freq property for %s", np->name);
+}
+
+static void picoxcell_add_clockevent(struct device_node *event_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clock_event_device *ced;
+ u32 irq, rate;
+
+ irq = irq_of_parse_and_map(event_timer, 0);
+ if (irq == NO_IRQ)
+ panic("No IRQ for clock event timer");
+
+ timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+ ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+ rate);
+ if (!ced)
+ panic("Unable to initialise clockevent device");
+
+ dw_apb_clockevent_register(ced);
+}
+
+static void picoxcell_add_clocksource(struct device_node *source_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clocksource *cs;
+ u32 rate;
+
+ timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+ cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+ if (!cs)
+ panic("Unable to initialise clocksource device");
+
+ dw_apb_clocksource_start(cs);
+ dw_apb_clocksource_register(cs);
+}
+
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *sched_io_base;
+
+unsigned long long notrace sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace picoxcell_update_sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-rtc" },
+ { /* Sentinel */ },
+};
+
+static void picoxcell_init_sched_clock(void)
+{
+ struct device_node *sched_timer;
+ u32 rate;
+
+ sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
+ if (!sched_timer)
+ panic("No RTC for sched clock to use");
+
+ timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+ of_node_put(sched_timer);
+
+ init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+}
+
+static const struct of_device_id picoxcell_timer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-timer" },
+ {},
+};
+
+static void __init picoxcell_timer_init(void)
+{
+ struct device_node *event_timer, *source_timer;
+
+ event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
+ if (!event_timer)
+ panic("No timer for clockevent");
+ picoxcell_add_clockevent(event_timer);
+
+ source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
+ if (!source_timer)
+ panic("No timer for clocksource");
+ picoxcell_add_clocksource(source_timer);
+
+ of_node_put(source_timer);
+
+ picoxcell_init_sched_clock();
+}
+
+struct sys_timer picoxcell_timer = {
+ .init = picoxcell_timer_init,
+};
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 63399755..cdb95e7 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,7 +264,7 @@
MACHINE_START(PNX4008, "Philips PNX4008")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = pnx4008_map_io,
.init_irq = pnx4008_init_irq,
.init_machine = pnx4008_init,
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index f219914..d3e71d3 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -13,14 +13,13 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
/* register definitions */
#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 931afeb..469d60d 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00090000
add \rv, \rp, #0xf4000000 @ virtual
add \rp, \rp, #0x40000000 @ physical
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
new file mode 100644
index 0000000..41027dd
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
+ *
+ * PNX4008 GPIO driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PNX4008_GPIO_H_
+#define _PNX4008_GPIO_H_
+
+
+/* Block numbers */
+#define GPIO_IN (0)
+#define GPIO_OUT (0x100)
+#define GPIO_BID (0x200)
+#define GPIO_RAM (0x300)
+#define GPIO_MUX (0x400)
+
+#define GPIO_TYPE_MASK(K) ((K) & 0x700)
+
+/* INPUT GPIOs */
+/* GPI */
+#define GPI_00 (GPIO_IN | 0)
+#define GPI_01 (GPIO_IN | 1)
+#define GPI_02 (GPIO_IN | 2)
+#define GPI_03 (GPIO_IN | 3)
+#define GPI_04 (GPIO_IN | 4)
+#define GPI_05 (GPIO_IN | 5)
+#define GPI_06 (GPIO_IN | 6)
+#define GPI_07 (GPIO_IN | 7)
+#define GPI_08 (GPIO_IN | 8)
+#define GPI_09 (GPIO_IN | 9)
+#define U1_RX (GPIO_IN | 15)
+#define U2_HTCS (GPIO_IN | 16)
+#define U2_RX (GPIO_IN | 17)
+#define U3_RX (GPIO_IN | 18)
+#define U4_RX (GPIO_IN | 19)
+#define U5_RX (GPIO_IN | 20)
+#define U6_IRRX (GPIO_IN | 21)
+#define U7_HCTS (GPIO_IN | 22)
+#define U7_RX (GPIO_IN | 23)
+/* MISC IN */
+#define SPI1_DATIN (GPIO_IN | 25)
+#define DISP_SYNC (GPIO_IN | 26)
+#define SPI2_DATIN (GPIO_IN | 27)
+#define GPI_11 (GPIO_IN | 28)
+
+#define GPIO_IN_MASK 0x1eff83ff
+
+/* OUTPUT GPIOs */
+/* GPO */
+#define GPO_00 (GPIO_OUT | 0)
+#define GPO_01 (GPIO_OUT | 1)
+#define GPO_02 (GPIO_OUT | 2)
+#define GPO_03 (GPIO_OUT | 3)
+#define GPO_04 (GPIO_OUT | 4)
+#define GPO_05 (GPIO_OUT | 5)
+#define GPO_06 (GPIO_OUT | 6)
+#define GPO_07 (GPIO_OUT | 7)
+#define GPO_08 (GPIO_OUT | 8)
+#define GPO_09 (GPIO_OUT | 9)
+#define GPO_10 (GPIO_OUT | 10)
+#define GPO_11 (GPIO_OUT | 11)
+#define GPO_12 (GPIO_OUT | 12)
+#define GPO_13 (GPIO_OUT | 13)
+#define GPO_14 (GPIO_OUT | 14)
+#define GPO_15 (GPIO_OUT | 15)
+#define GPO_16 (GPIO_OUT | 16)
+#define GPO_17 (GPIO_OUT | 17)
+#define GPO_18 (GPIO_OUT | 18)
+#define GPO_19 (GPIO_OUT | 19)
+#define GPO_20 (GPIO_OUT | 20)
+#define GPO_21 (GPIO_OUT | 21)
+#define GPO_22 (GPIO_OUT | 22)
+#define GPO_23 (GPIO_OUT | 23)
+
+#define GPIO_OUT_MASK 0xffffff
+
+/* BIDIRECTIONAL GPIOs */
+/* RAM pins */
+#define RAM_D19 (GPIO_RAM | 0)
+#define RAM_D20 (GPIO_RAM | 1)
+#define RAM_D21 (GPIO_RAM | 2)
+#define RAM_D22 (GPIO_RAM | 3)
+#define RAM_D23 (GPIO_RAM | 4)
+#define RAM_D24 (GPIO_RAM | 5)
+#define RAM_D25 (GPIO_RAM | 6)
+#define RAM_D26 (GPIO_RAM | 7)
+#define RAM_D27 (GPIO_RAM | 8)
+#define RAM_D28 (GPIO_RAM | 9)
+#define RAM_D29 (GPIO_RAM | 10)
+#define RAM_D30 (GPIO_RAM | 11)
+#define RAM_D31 (GPIO_RAM | 12)
+
+#define GPIO_RAM_MASK 0x1fff
+
+/* I/O pins */
+#define GPIO_00 (GPIO_BID | 25)
+#define GPIO_01 (GPIO_BID | 26)
+#define GPIO_02 (GPIO_BID | 27)
+#define GPIO_03 (GPIO_BID | 28)
+#define GPIO_04 (GPIO_BID | 29)
+#define GPIO_05 (GPIO_BID | 30)
+
+#define GPIO_BID_MASK 0x7e000000
+
+/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
+#define GPIO_SDRAM_SEL (GPIO_MUX | 3)
+
+#define GPIO_MUX_MASK 0x8
+
+/* Extraction/assembly macros */
+#define GPIO_BIT_MASK(K) ((K) & 0x1F)
+#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
+#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
+#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
+#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
+#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
+#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT 32
+
+#define SE_U7_RX_INT 63
+#define SE_U7_HCTS_INT 62
+#define SE_BT_CLKREQ_INT 61
+#define SE_U6_IRRX_INT 60
+/*59 unused*/
+#define SE_U5_RX_INT 58
+#define SE_GPI_11_INT 57
+#define SE_U3_RX_INT 56
+#define SE_U2_HCTS_INT 55
+#define SE_U2_RX_INT 54
+#define SE_U1_RX_INT 53
+#define SE_DISP_SYNC_INT 52
+/*51 unused*/
+#define SE_SDIO_INT_N 50
+#define SE_MSDIO_START_INT 49
+#define SE_GPI_06_INT 48
+#define SE_GPI_05_INT 47
+#define SE_GPI_04_INT 46
+#define SE_GPI_03_INT 45
+#define SE_GPI_02_INT 44
+#define SE_GPI_01_INT 43
+#define SE_GPI_00_INT 42
+#define SE_SYSCLKEN_PIN_INT 41
+#define SE_SPI1_DATAIN_INT 40
+#define SE_GPI_07_INT 39
+#define SE_SPI2_DATAIN_INT 38
+#define SE_GPI_10_INT 37
+#define SE_GPI_09_INT 36
+#define SE_GPI_08_INT 35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT 0
+
+#define SE_TS_IRQ 31
+#define SE_TS_P_INT 30
+#define SE_TS_AUX_INT 29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT 25
+#define SE_RTC_INT 24
+#define SE_USB_NEED_CLK_INT 23
+#define SE_USB_INT 22
+#define SE_USB_I2C_INT 21
+#define SE_USB_OTG_TIMER_INT 20
+#define SE_USB_OTG_ATX_INT_N 19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT 17
+#define SE_KEY_IRQ 16
+#define SE_DSP_SLAVEPORT_INT 15
+#define SE_DSP_GPIO1_INT 14
+#define SE_DSP_GPIO0_INT 13
+#define SE_DSP_AHB_INT 12
+/*11-6 unused*/
+#define SE_GPIO_05_INT 5
+#define SE_GPIO_04_INT 4
+#define SE_GPIO_03_INT 3
+#define SE_GPIO_02_INT 2
+#define SE_GPIO_01_INT 1
+#define SE_GPIO_00_INT 0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern int pnx4008_gpio_register_pin(unsigned short pin);
+extern int pnx4008_gpio_unregister_pin(unsigned short pin);
+extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
+extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
+extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
+extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+
+static inline void start_int_umask(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+ START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+ ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+ __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+ ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+ __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+ START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+#endif /* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
deleted file mode 100644
index 9591467..0000000
--- a/arch/arm/mach-pnx4008/include/mach/gpio.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/gpio.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN (0)
-#define GPIO_OUT (0x100)
-#define GPIO_BID (0x200)
-#define GPIO_RAM (0x300)
-#define GPIO_MUX (0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00 (GPIO_IN | 0)
-#define GPI_01 (GPIO_IN | 1)
-#define GPI_02 (GPIO_IN | 2)
-#define GPI_03 (GPIO_IN | 3)
-#define GPI_04 (GPIO_IN | 4)
-#define GPI_05 (GPIO_IN | 5)
-#define GPI_06 (GPIO_IN | 6)
-#define GPI_07 (GPIO_IN | 7)
-#define GPI_08 (GPIO_IN | 8)
-#define GPI_09 (GPIO_IN | 9)
-#define U1_RX (GPIO_IN | 15)
-#define U2_HTCS (GPIO_IN | 16)
-#define U2_RX (GPIO_IN | 17)
-#define U3_RX (GPIO_IN | 18)
-#define U4_RX (GPIO_IN | 19)
-#define U5_RX (GPIO_IN | 20)
-#define U6_IRRX (GPIO_IN | 21)
-#define U7_HCTS (GPIO_IN | 22)
-#define U7_RX (GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN (GPIO_IN | 25)
-#define DISP_SYNC (GPIO_IN | 26)
-#define SPI2_DATIN (GPIO_IN | 27)
-#define GPI_11 (GPIO_IN | 28)
-
-#define GPIO_IN_MASK 0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00 (GPIO_OUT | 0)
-#define GPO_01 (GPIO_OUT | 1)
-#define GPO_02 (GPIO_OUT | 2)
-#define GPO_03 (GPIO_OUT | 3)
-#define GPO_04 (GPIO_OUT | 4)
-#define GPO_05 (GPIO_OUT | 5)
-#define GPO_06 (GPIO_OUT | 6)
-#define GPO_07 (GPIO_OUT | 7)
-#define GPO_08 (GPIO_OUT | 8)
-#define GPO_09 (GPIO_OUT | 9)
-#define GPO_10 (GPIO_OUT | 10)
-#define GPO_11 (GPIO_OUT | 11)
-#define GPO_12 (GPIO_OUT | 12)
-#define GPO_13 (GPIO_OUT | 13)
-#define GPO_14 (GPIO_OUT | 14)
-#define GPO_15 (GPIO_OUT | 15)
-#define GPO_16 (GPIO_OUT | 16)
-#define GPO_17 (GPIO_OUT | 17)
-#define GPO_18 (GPIO_OUT | 18)
-#define GPO_19 (GPIO_OUT | 19)
-#define GPO_20 (GPIO_OUT | 20)
-#define GPO_21 (GPIO_OUT | 21)
-#define GPO_22 (GPIO_OUT | 22)
-#define GPO_23 (GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK 0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19 (GPIO_RAM | 0)
-#define RAM_D20 (GPIO_RAM | 1)
-#define RAM_D21 (GPIO_RAM | 2)
-#define RAM_D22 (GPIO_RAM | 3)
-#define RAM_D23 (GPIO_RAM | 4)
-#define RAM_D24 (GPIO_RAM | 5)
-#define RAM_D25 (GPIO_RAM | 6)
-#define RAM_D26 (GPIO_RAM | 7)
-#define RAM_D27 (GPIO_RAM | 8)
-#define RAM_D28 (GPIO_RAM | 9)
-#define RAM_D29 (GPIO_RAM | 10)
-#define RAM_D30 (GPIO_RAM | 11)
-#define RAM_D31 (GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK 0x1fff
-
-/* I/O pins */
-#define GPIO_00 (GPIO_BID | 25)
-#define GPIO_01 (GPIO_BID | 26)
-#define GPIO_02 (GPIO_BID | 27)
-#define GPIO_03 (GPIO_BID | 28)
-#define GPIO_04 (GPIO_BID | 29)
-#define GPIO_05 (GPIO_BID | 30)
-
-#define GPIO_BID_MASK 0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL (GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK 0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT 32
-
-#define SE_U7_RX_INT 63
-#define SE_U7_HCTS_INT 62
-#define SE_BT_CLKREQ_INT 61
-#define SE_U6_IRRX_INT 60
-/*59 unused*/
-#define SE_U5_RX_INT 58
-#define SE_GPI_11_INT 57
-#define SE_U3_RX_INT 56
-#define SE_U2_HCTS_INT 55
-#define SE_U2_RX_INT 54
-#define SE_U1_RX_INT 53
-#define SE_DISP_SYNC_INT 52
-/*51 unused*/
-#define SE_SDIO_INT_N 50
-#define SE_MSDIO_START_INT 49
-#define SE_GPI_06_INT 48
-#define SE_GPI_05_INT 47
-#define SE_GPI_04_INT 46
-#define SE_GPI_03_INT 45
-#define SE_GPI_02_INT 44
-#define SE_GPI_01_INT 43
-#define SE_GPI_00_INT 42
-#define SE_SYSCLKEN_PIN_INT 41
-#define SE_SPI1_DATAIN_INT 40
-#define SE_GPI_07_INT 39
-#define SE_SPI2_DATAIN_INT 38
-#define SE_GPI_10_INT 37
-#define SE_GPI_09_INT 36
-#define SE_GPI_08_INT 35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT 0
-
-#define SE_TS_IRQ 31
-#define SE_TS_P_INT 30
-#define SE_TS_AUX_INT 29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT 25
-#define SE_RTC_INT 24
-#define SE_USB_NEED_CLK_INT 23
-#define SE_USB_INT 22
-#define SE_USB_I2C_INT 21
-#define SE_USB_OTG_TIMER_INT 20
-#define SE_USB_OTG_ATX_INT_N 19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT 17
-#define SE_KEY_IRQ 16
-#define SE_DSP_SLAVEPORT_INT 15
-#define SE_DSP_GPIO1_INT 14
-#define SE_DSP_GPIO0_INT 13
-#define SE_DSP_AHB_INT 12
-/*11-6 unused*/
-#define SE_GPIO_05_INT 5
-#define SE_GPIO_04_INT 4
-#define SE_GPIO_03_INT 3
-#define SE_GPIO_02_INT 2
-#define SE_GPIO_01_INT 1
-#define SE_GPIO_00_INT 0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
- __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif /* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
deleted file mode 100644
index 1275db6..0000000
--- a/arch/arm/mach-pnx4008/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index f40961e..374c138 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/io.h>
@@ -19,8 +18,8 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
#include <mach/clock.h>
#define UART_3 0
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index 7af7fc0..13dd160 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -3,5 +3,7 @@
obj-y += clock.o
obj-y += rstc.o
obj-y += prima2.o
+obj-y += rtciobrg.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
+obj-$(CONFIG_SUSPEND) += pm.o sleep.o
diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c
index 615a4e7..aebad7e 100644
--- a/arch/arm/mach-prima2/clock.c
+++ b/arch/arm/mach-prima2/clock.c
@@ -350,10 +350,10 @@
.clk = &clk_mem,
}, {
.dev_id = "sys",
- .clk = &clk_sys,
+ .clk = &clk_sys,
}, {
.dev_id = "io",
- .clk = &clk_io,
+ .clk = &clk_io,
},
};
diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S
index bf75106..cd97492 100644
--- a/arch/arm/mach-prima2/include/mach/debug-macro.S
+++ b/arch/arm/mach-prima2/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
#include <mach/hardware.h>
#include <mach/uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
.endm
diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h
deleted file mode 100644
index 368cd5a..0000000
--- a/arch/arm/mach-prima2/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/memory.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-/*
- * Restrict DMA-able region to workaround silicon limitation.
- * The limitation restricts buffers available for DMA to SD/MMC
- * hardware to be below 256MB
- */
-#define ARM_DMA_ZONE_SIZE (SZ_256M)
-
-#endif
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index 7af254d..d93ceef 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -13,6 +13,8 @@
#include <asm/mach/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/irqdomain.h>
+#include <linux/syscore_ops.h>
#define SIRFSOC_INT_RISC_MASK0 0x0018
#define SIRFSOC_INT_RISC_MASK1 0x001C
@@ -66,7 +68,48 @@
if (!sirfsoc_intc_base)
panic("unable to map intc cpu registers\n");
+ irq_domain_add_simple(np, 0);
+
of_node_put(np);
sirfsoc_irq_init();
}
+
+struct sirfsoc_irq_status {
+ u32 mask0;
+ u32 mask1;
+ u32 level0;
+ u32 level1;
+};
+
+static struct sirfsoc_irq_status sirfsoc_irq_st;
+
+static int sirfsoc_irq_suspend(void)
+{
+ sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
+ sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
+ sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
+ sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
+
+ return 0;
+}
+
+static void sirfsoc_irq_resume(void)
+{
+ writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
+ writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
+ writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
+ writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
+}
+
+static struct syscore_ops sirfsoc_irq_syscore_ops = {
+ .suspend = sirfsoc_irq_suspend,
+ .resume = sirfsoc_irq_resume,
+};
+
+static int __init sirfsoc_irq_pm_init(void)
+{
+ register_syscore_ops(&sirfsoc_irq_syscore_ops);
+ return 0;
+}
+device_initcall(sirfsoc_irq_pm_init);
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index 9cda205..c998377 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -8,52 +8,24 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/errno.h>
#include <linux/of.h>
-#include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/memory.h>
-#define L2X0_ADDR_FILTERING_START 0xC00
-#define L2X0_ADDR_FILTERING_END 0xC04
-
-static struct of_device_id l2x_ids[] = {
- { .compatible = "arm,pl310-cache" },
+static struct of_device_id prima2_l2x0_ids[] = {
+ { .compatible = "sirf,prima2-pl310-cache" },
+ {},
};
-static int __init sirfsoc_of_l2x_init(void)
+static int __init sirfsoc_l2x0_init(void)
{
struct device_node *np;
- void __iomem *sirfsoc_l2x_base;
- np = of_find_matching_node(NULL, l2x_ids);
- if (!np)
- panic("unable to find compatible l2x node in dtb\n");
-
- sirfsoc_l2x_base = of_iomap(np, 0);
- if (!sirfsoc_l2x_base)
- panic("unable to map l2x cpu registers\n");
-
- of_node_put(np);
-
- if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) {
- /*
- * set the physical memory windows L2 cache will cover
- */
- writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
- sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
- writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
- sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
-
- writel_relaxed(0,
- sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL);
- writel_relaxed(0,
- sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL);
+ np = of_find_matching_node(NULL, prima2_l2x0_ids);
+ if (np) {
+ pr_info("Initializing prima2 L2 cache\n");
+ return l2x0_of_init(0x40000, 0);
}
- l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000,
- 0x00000000);
return 0;
}
-early_initcall(sirfsoc_of_l2x_init);
+early_initcall(sirfsoc_l2x0_init);
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
new file mode 100644
index 0000000..cb53160
--- /dev/null
+++ b/arch/arm/mach-prima2/pm.c
@@ -0,0 +1,150 @@
+/*
+ * power management entry for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/rtc/sirfsoc_rtciobrg.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "pm.h"
+
+/*
+ * suspend asm codes will access these to make DRAM become self-refresh and
+ * system sleep
+ */
+u32 sirfsoc_pwrc_base;
+void __iomem *sirfsoc_memc_base;
+
+static void sirfsoc_set_wakeup_source(void)
+{
+ u32 pwr_trigger_en_reg;
+ pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_TRIGGER_EN);
+#define X_ON_KEY_B (1 << 0)
+ sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B,
+ sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
+}
+
+static void sirfsoc_set_sleep_mode(u32 mode)
+{
+ u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_PDN_CTRL);
+ sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1);
+ sleep_mode |= mode << 1;
+ sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_PDN_CTRL);
+}
+
+static int sirfsoc_pre_suspend_power_off(void)
+{
+ u32 wakeup_entry = virt_to_phys(cpu_resume);
+
+ sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_SCRATCH_PAD1);
+
+ sirfsoc_set_wakeup_source();
+
+ sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE);
+
+ return 0;
+}
+
+static int sirfsoc_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ sirfsoc_pre_suspend_power_off();
+
+ outer_flush_all();
+ outer_disable();
+ /* go zzz */
+ cpu_suspend(0, sirfsoc_finish_suspend);
+ outer_resume();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct platform_suspend_ops sirfsoc_pm_ops = {
+ .enter = sirfsoc_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init sirfsoc_pm_init(void)
+{
+ suspend_set_ops(&sirfsoc_pm_ops);
+ return 0;
+}
+late_initcall(sirfsoc_pm_init);
+
+static const struct of_device_id pwrc_ids[] = {
+ { .compatible = "sirf,prima2-pwrc" },
+ {}
+};
+
+static int __init sirfsoc_of_pwrc_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, pwrc_ids);
+ if (!np)
+ panic("unable to find compatible pwrc node in dtb\n");
+
+ /*
+ * pwrc behind rtciobrg is not located in memory space
+ * though the property is named reg. reg only means base
+ * offset for pwrc. then of_iomap is not suitable here.
+ */
+ if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base))
+ panic("unable to find base address of pwrc node in dtb\n");
+
+ of_node_put(np);
+
+ return 0;
+}
+postcore_initcall(sirfsoc_of_pwrc_init);
+
+static const struct of_device_id memc_ids[] = {
+ { .compatible = "sirf,prima2-memc" },
+ {}
+};
+
+static int __devinit sirfsoc_memc_probe(struct platform_device *op)
+{
+ struct device_node *np = op->dev.of_node;
+
+ sirfsoc_memc_base = of_iomap(np, 0);
+ if (!sirfsoc_memc_base)
+ panic("unable to map memc registers\n");
+
+ return 0;
+}
+
+static struct platform_driver sirfsoc_memc_driver = {
+ .probe = sirfsoc_memc_probe,
+ .driver = {
+ .name = "sirfsoc-memc",
+ .owner = THIS_MODULE,
+ .of_match_table = memc_ids,
+ },
+};
+
+static int __init sirfsoc_memc_init(void)
+{
+ return platform_driver_register(&sirfsoc_memc_driver);
+}
+postcore_initcall(sirfsoc_memc_init);
diff --git a/arch/arm/mach-prima2/pm.h b/arch/arm/mach-prima2/pm.h
new file mode 100644
index 0000000..bae6d77
--- /dev/null
+++ b/arch/arm/mach-prima2/pm.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-prima2/pm.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _MACH_PRIMA2_PM_H_
+#define _MACH_PRIMA2_PM_H_
+
+#define SIRFSOC_PWR_SLEEPFORCE 0x01
+
+#define SIRFSOC_SLEEP_MODE_MASK 0x3
+#define SIRFSOC_DEEP_SLEEP_MODE 0x1
+
+#define SIRFSOC_PWRC_PDN_CTRL 0x0
+#define SIRFSOC_PWRC_PON_OFF 0x4
+#define SIRFSOC_PWRC_TRIGGER_EN 0x8
+#define SIRFSOC_PWRC_PIN_STATUS 0x14
+#define SIRFSOC_PWRC_SCRATCH_PAD1 0x18
+#define SIRFSOC_PWRC_SCRATCH_PAD2 0x1C
+
+#ifndef __ASSEMBLY__
+extern int sirfsoc_finish_suspend(unsigned long);
+#endif
+
+#endif
+
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index f57124b..ef555c0 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -1,5 +1,5 @@
/*
- * Defines machines for CSR SiRFprimaII
+ * Defines machines for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
@@ -31,11 +31,12 @@
MACHINE_START(PRIMA2_EVB, "prima2cb")
/* Maintainer: Barry Song <baohua.song@csr.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_early = sirfsoc_of_clk_init,
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer,
+ .dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
new file mode 100644
index 0000000..9d80f1e
--- /dev/null
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -0,0 +1,139 @@
+/*
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#define SIRFSOC_CPUIOBRG_CTRL 0x00
+#define SIRFSOC_CPUIOBRG_WRBE 0x04
+#define SIRFSOC_CPUIOBRG_ADDR 0x08
+#define SIRFSOC_CPUIOBRG_DATA 0x0c
+
+/*
+ * suspend asm codes will access this address to make system deepsleep
+ * after DRAM becomes self-refresh
+ */
+void __iomem *sirfsoc_rtciobrg_base;
+static DEFINE_SPINLOCK(rtciobrg_lock);
+
+/*
+ * symbols without lock are only used by suspend asm codes
+ * and these symbols are not exported too
+ */
+void sirfsoc_rtc_iobrg_wait_sync(void)
+{
+ while (readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL))
+ cpu_relax();
+}
+
+void sirfsoc_rtc_iobrg_besyncing(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtciobrg_lock, flags);
+
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ spin_unlock_irqrestore(&rtciobrg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_besyncing);
+
+u32 __sirfsoc_rtc_iobrg_readl(u32 addr)
+{
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ writel_relaxed(0x00, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE);
+ writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR);
+ writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL);
+
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ return readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA);
+}
+
+u32 sirfsoc_rtc_iobrg_readl(u32 addr)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&rtciobrg_lock, flags);
+
+ val = __sirfsoc_rtc_iobrg_readl(addr);
+
+ spin_unlock_irqrestore(&rtciobrg_lock, flags);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_readl);
+
+void sirfsoc_rtc_iobrg_pre_writel(u32 val, u32 addr)
+{
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ writel_relaxed(0xf1, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE);
+ writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR);
+
+ writel_relaxed(val, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA);
+}
+
+void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtciobrg_lock, flags);
+
+ sirfsoc_rtc_iobrg_pre_writel(val, addr);
+
+ writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL);
+
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ spin_unlock_irqrestore(&rtciobrg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
+
+static const struct of_device_id rtciobrg_ids[] = {
+ { .compatible = "sirf,prima2-rtciobg" },
+ {}
+};
+
+static int __devinit sirfsoc_rtciobrg_probe(struct platform_device *op)
+{
+ struct device_node *np = op->dev.of_node;
+
+ sirfsoc_rtciobrg_base = of_iomap(np, 0);
+ if (!sirfsoc_rtciobrg_base)
+ panic("unable to map rtc iobrg registers\n");
+
+ return 0;
+}
+
+static struct platform_driver sirfsoc_rtciobrg_driver = {
+ .probe = sirfsoc_rtciobrg_probe,
+ .driver = {
+ .name = "sirfsoc-rtciobrg",
+ .owner = THIS_MODULE,
+ .of_match_table = rtciobrg_ids,
+ },
+};
+
+static int __init sirfsoc_rtciobrg_init(void)
+{
+ return platform_driver_register(&sirfsoc_rtciobrg_driver);
+}
+postcore_initcall(sirfsoc_rtciobrg_init);
+
+MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
+ "Barry Song <baohua.song@csr.com>");
+MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S
new file mode 100644
index 0000000..0745abc
--- /dev/null
+++ b/arch/arm/mach-prima2/sleep.S
@@ -0,0 +1,64 @@
+/*
+ * sleep mode for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+#define DENALI_CTL_22_OFF 0x58
+#define DENALI_CTL_112_OFF 0x1c0
+
+ .text
+
+ENTRY(sirfsoc_finish_suspend)
+ @ r5: mem controller
+ ldr r0, =sirfsoc_memc_base
+ ldr r5, [r0]
+ @ r6: pwrc base offset
+ ldr r0, =sirfsoc_pwrc_base
+ ldr r6, [r0]
+ @ r7: rtc iobrg controller
+ ldr r0, =sirfsoc_rtciobrg_base
+ ldr r7, [r0]
+
+ @ Read the power control register and set the
+ @ sleep force bit.
+ add r0, r6, #SIRFSOC_PWRC_PDN_CTRL
+ bl __sirfsoc_rtc_iobrg_readl
+ orr r0,r0,#SIRFSOC_PWR_SLEEPFORCE
+ add r1, r6, #SIRFSOC_PWRC_PDN_CTRL
+ bl sirfsoc_rtc_iobrg_pre_writel
+ mov r1, #0x1
+
+ @ read the MEM ctl register and set the self
+ @ refresh bit
+
+ ldr r2, [r5, #DENALI_CTL_22_OFF]
+ orr r2, r2, #0x1
+
+ @ Following code has to run from cache since
+ @ the RAM is going to self refresh mode
+ .align 5
+ str r2, [r5, #DENALI_CTL_22_OFF]
+
+1:
+ ldr r4, [r5, #DENALI_CTL_112_OFF]
+ tst r4, #0x1
+ bne 1b
+
+ @ write SLEEPFORCE through rtc iobridge
+
+ str r1, [r7]
+ @ wait rtc io bridge sync
+1:
+ ldr r3, [r7]
+ tst r3, #0x01
+ bne 1b
+ b .
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index ed7ec48..b7a6091 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -40,6 +40,17 @@
#define SIRFSOC_TIMER_LATCH_BIT BIT(0)
+#define SIRFSOC_TIMER_REG_CNT 11
+
+static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
+ SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2,
+ SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5,
+ SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV,
+ SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI,
+};
+
+static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
+
static void __iomem *sirfsoc_timer_base;
static void __init sirfsoc_of_timer_map(void);
@@ -106,6 +117,27 @@
}
}
+static void sirfsoc_clocksource_suspend(struct clocksource *cs)
+{
+ int i;
+
+ writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
+
+ for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
+ sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+}
+
+static void sirfsoc_clocksource_resume(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
+ writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+
+ writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
+ writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
+}
+
static struct clock_event_device sirfsoc_clockevent = {
.name = "sirfsoc_clockevent",
.rating = 200,
@@ -120,6 +152,8 @@
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.read = sirfsoc_timer_read,
+ .suspend = sirfsoc_clocksource_suspend,
+ .resume = sirfsoc_clocksource_resume,
};
static struct irqaction sirfsoc_timer_irq = {
@@ -133,14 +167,14 @@
/* Overwrite weak default sched_clock with more precise one */
unsigned long long notrace sched_clock(void)
{
- static int is_mapped = 0;
+ static int is_mapped;
/*
* sched_clock is called earlier than .init of sys_timer
* if we map timer memory in .init of sys_timer, system
* will panic due to illegal memory access
*/
- if(!is_mapped) {
+ if (!is_mapped) {
sirfsoc_of_timer_map();
is_mapped = 1;
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index cd19309..61d3c72 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,6 +2,27 @@
menu "Intel PXA2xx/PXA3xx Implementations"
+config ARCH_PXA_V7
+ bool "ARMv7 (PXA95x) based systems"
+
+if ARCH_PXA_V7
+comment "Marvell Dev Platforms (sorted by hardware release time)"
+config MACH_TAVOREVB3
+ bool "PXA95x Development Platform (aka TavorEVB III)"
+ select CPU_PXA955
+
+config MACH_SAARB
+ bool "PXA955 Handheld Platform (aka SAARB)"
+ select CPU_PXA955
+endif
+
+config PXA_V7_MACH_AUTO
+ def_bool y
+ depends on ARCH_PXA_V7
+ depends on !MACH_SAARB
+ select MACH_TAVOREVB3
+
+if !ARCH_PXA_V7
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config ARCH_LUBBOCK
@@ -41,19 +62,11 @@
select PXA3xx
select CPU_PXA930
-config MACH_TAVOREVB3
- bool "PXA95x Development Platform (aka TavorEVB III)"
- select CPU_PXA950
-
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
-config MACH_SAARB
- bool "PXA955 Handheld Platform (aka SAARB)"
- select CPU_PXA955
-
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
@@ -414,6 +427,7 @@
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
+ select MACH_PALM27X
select PXA27x
select IWMMXT
select PALM_TREO
@@ -425,6 +439,7 @@
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
+ select MACH_PALM27X
select PXA27x
select IWMMXT
select PALM_TREO
@@ -436,15 +451,18 @@
bool "Raumfeld Controller"
select PXA3xx
select CPU_PXA300
+ select POWER_SUPPLY
select HAVE_PWM
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
+ select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
+ select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
@@ -598,7 +616,7 @@
bool "Zipit Z2 Handheld"
select PXA27x
select HAVE_PWM
-
+endif
endmenu
config PXA25x
@@ -688,6 +706,8 @@
config SHARPSL_PM_MAX1111
bool
select HWMON
+ select SPI
+ select SPI_MASTER
select SENSORS_MAX1111
config PXA_HAVE_ISA_IRQS
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index cc39d17..be0f7df 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -19,7 +19,7 @@
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
+obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index ef3e8b1..fc0b854 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -591,7 +591,7 @@
BALLOON3_NAND_CONTROL_REG);
if (balloon3_ctl_set)
__raw_writel(balloon3_ctl_set,
- BALLOON3_NAND_CONTROL_REG |
+ BALLOON3_NAND_CONTROL_REG +
BALLOON3_FPGA_SETnCLR);
}
@@ -608,7 +608,7 @@
__raw_writew(
BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
- BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
/* Deassert correct nCE line */
__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
@@ -626,7 +626,7 @@
int ret;
__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
- BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
ver = __raw_readw(BALLOON3_FPGA_VER);
if (ver < 0x4f08)
@@ -649,7 +649,7 @@
BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
BALLOON3_NAND_CONTROL_FLWP,
- BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
return 0;
err2:
@@ -807,7 +807,7 @@
static struct map_desc balloon3_io_desc[] __initdata = {
{ /* CPLD/FPGA */
- .virtual = BALLOON3_FPGA_VIRT,
+ .virtual = (unsigned long)BALLOON3_FPGA_VIRT,
.pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS),
.length = BALLOON3_FPGA_LENGTH,
.type = MT_DEVICE,
@@ -828,5 +828,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 648b0ab..4efc16d 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,7 +148,7 @@
MACHINE_START(CAPC7117,
"Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 93f59f8..be75147 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -11,7 +11,6 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand-gpio.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 6bf479d..ebd9259 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -26,7 +26,7 @@
#include <asm/hardware/it8152.h>
-unsigned long it8152_base_address;
+void __iomem *it8152_base_address;
static int cmx2xx_it8152_irq_gpio;
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 13cf518..f2e4190 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -39,7 +39,7 @@
#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40)
/* virtual addresses for statically mapped regions */
-#define CMX2XX_VIRT_BASE (0xe8000000)
+#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000)
#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE)
/* physical address if local-bus attached devices */
@@ -482,7 +482,7 @@
/* Map PCI companion statically */
static struct map_desc cmx2xx_io_desc[] __initdata = {
[0] = { /* PCI bridge */
- .virtual = CMX2XX_IT8152_VIRT,
+ .virtual = (unsigned long)CMX2XX_IT8152_VIRT,
.pfn = __phys_to_pfn(PXA_CS4_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
@@ -513,7 +513,7 @@
#endif
MACHINE_START(ARMCORE, "Compulab CM-X2XX")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = cmx2xx_map_io,
.nr_irqs = CMX2XX_NR_IRQS,
.init_irq = cmx2xx_init_irq,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index d940e8a..3a7387f 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -775,7 +775,6 @@
static void __init cm_x300_init_wi2wi(void)
{
- int bt_reset, wlan_en;
int err;
if (system_rev < 130) {
@@ -791,12 +790,11 @@
}
udelay(10);
- gpio_set_value(bt_reset, 0);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
udelay(10);
- gpio_set_value(bt_reset, 1);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
- gpio_free(wlan_en);
- gpio_free(bt_reset);
+ gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
}
/* MFP */
@@ -852,7 +850,7 @@
}
MACHINE_START(CM_X300, "CM-X300 module")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 8709209..7db6646 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -306,7 +306,7 @@
}
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
@@ -315,7 +315,7 @@
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_income_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 60a6781..c825e8b 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -183,7 +183,7 @@
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa300_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d2c6631..692e1ff 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -253,7 +253,7 @@
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa320_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fe812ea..5e2cf39 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,7 +272,7 @@
}
MACHINE_START(CSB726, "Cogent CSB726")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2e37ea5..94acc0b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1299,7 +1299,7 @@
}
MACHINE_START(EM_X270, "Compulab EM-X270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
@@ -1308,7 +1308,7 @@
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index e4a1f4d..8e697dd 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -188,7 +188,7 @@
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -238,7 +238,7 @@
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -361,7 +361,7 @@
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -550,7 +550,7 @@
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -742,7 +742,7 @@
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -947,7 +947,7 @@
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index b73eadb..8308eee 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -797,7 +797,7 @@
}
MACHINE_START(EZX_A780, "Motorola EZX A780")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -863,7 +863,7 @@
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -929,7 +929,7 @@
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1120,7 +1120,7 @@
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1186,7 +1186,7 @@
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1226,7 +1226,7 @@
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index f5d91ef..5432ecb 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -26,7 +27,6 @@
#include <asm/mach-types.h>
#include <mach/reset.h>
-#include <mach/gpio.h>
#include <mach/smemc.h>
#include <mach/pxa3xx-regs.h>
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index deaa111..9c8208c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -233,7 +233,7 @@
}
MACHINE_START(GUMSTIX, "Gumstix")
- .boot_params = 0xa0000100, /* match u-boot bi_boot_params */
+ .atag_offset = 0x100, /* match u-boot bi_boot_params */
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 0a235128..4b5e110 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -203,7 +203,7 @@
}
MACHINE_START(H5400, "HP iPAQ H5000")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index a997d0ab..f2c3245 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -158,7 +158,7 @@
MACHINE_START(HIMALAYA, "HTC Himalaya")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index c748a47..6f6368e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -838,7 +838,7 @@
}
MACHINE_START(H4700, "HP iPAQ HX4700")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d427429..f78d5db7 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,7 +191,7 @@
}
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
index f4c0365..bbf9df3 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -20,7 +20,7 @@
* Peripheral Bus
*/
#define PERIPH_PHYS 0x40000000
-#define PERIPH_VIRT 0xf2000000
+#define PERIPH_VIRT IOMEM(0xf2000000)
#define PERIPH_SIZE 0x02000000
/*
@@ -28,21 +28,21 @@
*/
#define PXA2XX_SMEMC_PHYS 0x48000000
#define PXA3XX_SMEMC_PHYS 0x4a000000
-#define SMEMC_VIRT 0xf6000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
#define SMEMC_SIZE 0x00100000
/*
* Dynamic Memory Controller (only on PXA3xx)
*/
#define DMEMC_PHYS 0x48100000
-#define DMEMC_VIRT 0xf6100000
+#define DMEMC_VIRT IOMEM(0xf6100000)
#define DMEMC_SIZE 0x00100000
/*
* Internal Memory Controller (PXA27x and later)
*/
#define IMEMC_PHYS 0x58000000
-#define IMEMC_VIRT 0xfe000000
+#define IMEMC_VIRT IOMEM(0xfe000000)
#define IMEMC_SIZE 0x00100000
#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 7074e76..6d7eab3 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -23,7 +23,7 @@
};
#define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
+#define BALLOON3_FPGA_VIRT IOMEM(0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
#define BALLOON3_FPGA_SETnCLR (0x1000)
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 7d5c751..70b112e 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00100000
orr \rv, \rp, #io_p2v(0x40000000) @ virtual
orr \rp, \rp, #0x40000000 @ physical
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
new file mode 100644
index 0000000..576868f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -0,0 +1,133 @@
+/*
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __MACH_PXA_GPIO_PXA_H
+#define __MACH_PXA_GPIO_PXA_H
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+
+#define GPIO_REGS_VIRT io_p2v(0x40E00000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
+
+#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+#include <plat/gpio-pxa.h>
+#endif /* __MACH_PXA_GPIO_PXA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index c463950..004cade 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,84 +24,10 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+/* The defines for the driver are needed for the accelerated accessors */
+#include "gpio-pxa.h"
-#define GPIO_REGS_VIRT io_p2v(0x40E00000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L GPIO_REG(0x0054)
-#define GAFR0_U GPIO_REG(0x0058)
-#define GAFR1_L GPIO_REG(0x005C)
-#define GAFR1_U GPIO_REG(0x0060)
-#define GAFR2_L GPIO_REG(0x0064)
-#define GAFR2_U GPIO_REG(0x0068)
-#define GAFR3_L GPIO_REG(0x006C)
-#define GAFR3_U GPIO_REG(0x0070)
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
static inline int irq_to_gpio(unsigned int irq)
@@ -118,37 +44,5 @@
return -1;
}
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- } else
- return GPDR(gpio) & GPIO_bit(gpio);
-}
-
#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index de63ca3..8184669 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -36,22 +36,23 @@
* Note that not all PXA2xx chips implement all those addresses, and the
* kernel only maps the minimum needed range of this mapping.
*/
-#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
#ifndef __ASSEMBLY__
-
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+# define IOMEM(x) ((void __iomem *)(x))
+# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x)))
/* With indexed regs we don't want to feed the index through io_p2v()
especially if it is a variable, otherwise horrible code will result. */
# define __REG2(x,y) \
- (*(volatile u32 *)((u32)&__REG(x) + (y)))
+ (*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
# define __PREG(x) (io_v2p((u32)&(x)))
#else
+# define IOMEM(x) x
# define __REG(x) io_p2v(x)
# define __PREG(x) io_v2p(x)
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 2a5726c..b6238cb 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,7 +1,7 @@
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#define LITTLETON_ETH_PHYS 0x30000000
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index cd07009..4edc712 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -13,13 +13,13 @@
#define __ASM_ARCH_LPD270_H
#define LPD270_CPLD_PHYS PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT 0xf0000000
+#define LPD270_CPLD_VIRT IOMEM(0xf0000000)
#define LPD270_CPLD_SIZE 0x00100000
#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000)
/* CPLD registers */
-#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CPLD_REG(x) (LPD270_CPLD_VIRT + (x))
#define LPD270_CONTROL LPD270_CPLD_REG(0x00)
#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04)
#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08)
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
deleted file mode 100644
index d05a597..0000000
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/memory.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 297387e..990d2bf 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -16,7 +16,6 @@
#define __ARCH_PXA_MTD_XIP_H__
#include <mach/regs-ost.h>
-#include <mach/regs-intc.h>
#define xip_irqpending() (ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
index 0a5e5ea..f80bbe2 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -34,7 +34,7 @@
extern void __init palm27x_lcd_init(int power,
struct pxafb_mode_info *mode);
#else
-static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#define palm27x_lcd_init(power, mode) do {} while (0)
#endif
#if defined(CONFIG_USB_GADGET_PXA27X) || \
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 10abc4f..7074a6e 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -71,7 +71,7 @@
/* Various addresses */
#define PALMTX_PCMCIA_PHYS 0x28000000
-#define PALMTX_PCMCIA_VIRT 0xf0000000
+#define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000)
#define PALMTX_PCMCIA_SIZE 0x100000
#define PALMTX_PHYS_RAM_START 0xa0000000
@@ -84,8 +84,8 @@
#define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24))
#define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT 0xff100000
-#define PALMTX_NAND_CLE_VIRT 0xff200000
+#define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000)
+#define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000)
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index b9b1bdc..7cff640 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -1,6 +1,7 @@
#ifndef __MACH_PXA27x_H
#define __MACH_PXA27x_H
+#include <linux/suspend.h>
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
@@ -21,6 +22,7 @@
extern void __init pxa27x_map_io(void);
extern void __init pxa27x_init_irq(void);
extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern void pxa27x_cpu_pm_enter(suspend_state_t state);
#define pxa27x_handle_irq ichp_handle_irq
diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h
new file mode 100644
index 0000000..cbb097c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa95x.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_PXA95X_H
+#define __MACH_PXA95X_H
+
+#include <mach/pxa3xx.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA95X_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 01a45ac4..486b4c5 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -158,5 +158,18 @@
void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
unsigned long pxafb_get_hsync_time(struct device *dev);
+#ifdef CONFIG_FB_PXA_SMARTPANEL
extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
extern int pxafb_smart_flush(struct fb_info *info);
+#else
+static inline int pxafb_smart_queue(struct fb_info *info,
+ uint16_t *cmds, int n)
+{
+ return 0;
+}
+
+static inline int pxafb_smart_flush(struct fb_info *info)
+{
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
index 654adc9..b7de471 100644
--- a/arch/arm/mach-pxa/include/mach/smemc.h
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -13,7 +13,7 @@
#define PXA2XX_SMEMC_BASE 0x48000000
#define PXA3XX_SMEMC_BASE 0x4a000000
-#define SMEMC_VIRT 0xf6000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
#define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */
#define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index 0641f31..56024f8 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -68,7 +68,7 @@
* Be gentle, and remap that over 32kB...
*/
-#define ZEUS_CPLD (0xf0000000)
+#define ZEUS_CPLD IOMEM(0xf0000000)
#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000)
#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000)
#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000)
@@ -76,7 +76,7 @@
/* CPLD register bits */
#define ZEUS_CPLD_CONTROL_CF_RST 0x01
-#define ZEUS_PC104IO (0xf1000000)
+#define ZEUS_PC104IO IOMEM(0xf1000000)
#define ZEUS_SRAM_SIZE (256 * 1024)
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index ea24998..ecca976 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -19,7 +19,7 @@
extern int lcd_id;
extern int lcd_orientation;
-#ifdef CONFIG_CPU_PXA300
+#ifdef CONFIG_MACH_ZYLONITE300
extern void zylonite_pxa300_init(void);
#else
static inline void zylonite_pxa300_init(void)
@@ -29,7 +29,7 @@
}
#endif
-#ifdef CONFIG_CPU_PXA320
+#ifdef CONFIG_MACH_ZYLONITE320
extern void zylonite_pxa320_init(void);
#else
static inline void zylonite_pxa320_init(void)
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index ca60757..532c5d3 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -11,7 +11,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -23,11 +22,11 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
-#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000)
+#define IRQ_BASE io_p2v(0x40d00000)
#define ICIP (0x000)
#define ICMR (0x004)
@@ -65,7 +64,7 @@
0x40d00130,
};
- return (void __iomem *)io_p2v(phys_base[i]);
+ return io_p2v(phys_base[i]);
}
void pxa_mask_irq(struct irq_data *d)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8f97e15..0037e57 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -437,7 +437,7 @@
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index c171d6e..1dd5302 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -39,7 +39,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
@@ -480,7 +479,7 @@
static struct map_desc lpd270_io_desc[] __initdata = {
{
- .virtual = LPD270_CPLD_VIRT,
+ .virtual = (unsigned long)LPD270_CPLD_VIRT,
.pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
.length = LPD270_CPLD_SIZE,
.type = MT_DEVICE,
@@ -499,7 +498,7 @@
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
/* Maintainer: Peter Barada */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = lpd270_map_io,
.nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a8c696b..c48ce6d 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -42,7 +43,6 @@
#include <asm/hardware/sa1111.h>
#include <mach/pxa25x.h>
-#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5fe5bcd..4b796c3 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -753,7 +753,7 @@
MACHINE_START(MAGICIAN, "HTC Magician")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 4622eb7..0567d39 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -43,7 +43,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
@@ -616,7 +615,7 @@
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0xa0000100, /* BLOB boot parameter setting */
+ .atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b27544b..43a5f68 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -12,15 +12,15 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/syscore_ops.h>
-#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 64810f9..b938fc2 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -751,7 +751,7 @@
}
MACHINE_START(MIOA701, "MIO A701")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.handle_irq = &pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index fb408861..4af5d51 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,7 +92,7 @@
/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
MACHINE_START(NEC_MP900, "MobilePro900/C")
- .boot_params = 0xa0220100,
+ .atag_offset = 0x220100,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 6b77365..3d4a281 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -342,7 +342,7 @@
}
MACHINE_START(PALMLD, "Palm LifeDrive")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmld_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9bd3e47..99d6bcf 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -202,7 +202,7 @@
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ad4a6c..6ec7cae 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -537,7 +537,7 @@
};
MACHINE_START(PALMTC, "Palm Tungsten|C")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 664232f..9376da0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -356,7 +356,7 @@
}
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index bb27d4b..94e9708 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -423,6 +423,7 @@
palmtreo_leds_init();
}
+#ifdef CONFIG_MACH_TREO680
static void __init treo680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
@@ -430,7 +431,9 @@
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
GPIO_NR_TREO680_SD_POWER, 0);
}
+#endif
+#ifdef CONFIG_MACH_CENTRO
static void __init centro_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
@@ -438,9 +441,11 @@
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
GPIO_NR_CENTRO_SD_POWER, 1);
}
+#endif
+#ifdef CONFIG_MACH_TREO680
MACHINE_START(TREO680, "Palm Treo 680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
@@ -448,9 +453,11 @@
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END
+#endif
+#ifdef CONFIG_MACH_CENTRO
MACHINE_START(CENTRO, "Palm Centro 685")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
@@ -458,3 +465,4 @@
.timer = &pxa_timer,
.init_machine = centro_init,
MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fc428558..4e3e459 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -247,7 +247,7 @@
unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+ char __iomem *nandaddr = this->IO_ADDR_W;
if (cmd == NAND_CMD_NONE)
return;
@@ -315,17 +315,17 @@
******************************************************************************/
static struct map_desc palmtx_io_desc[] __initdata = {
{
- .virtual = PALMTX_PCMCIA_VIRT,
+ .virtual = (unsigned long)PALMTX_PCMCIA_VIRT,
.pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
.length = PALMTX_PCMCIA_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = PALMTX_NAND_ALE_VIRT,
+ .virtual = (unsigned long)PALMTX_NAND_ALE_VIRT,
.pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
- .virtual = PALMTX_NAND_CLE_VIRT,
+ .virtual = (unsigned long)PALMTX_NAND_CLE_VIRT,
.pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
.length = SZ_1M,
.type = MT_DEVICE,
@@ -364,7 +364,7 @@
}
MACHINE_START(PALMTX, "Palm T|X")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmtx_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index e61c1cc..68e18ba 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -399,7 +399,7 @@
}
MACHINE_START(PALMZ72, "Palm Zire72")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ffa65df..0b825a3 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -258,7 +258,7 @@
MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
/* Maintainer: Pengutronix */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pcm027_map_io,
.nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6d5b7e0..9a9c539 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -19,7 +19,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
@@ -28,7 +28,6 @@
#include <media/soc_camera.h>
-#include <asm/gpio.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 9c434d2..f05f948 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -23,12 +24,12 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
@@ -324,7 +325,7 @@
static struct map_desc pxa25x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9d2400b..bc5a98e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,13 +21,13 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/suspend.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
@@ -390,7 +391,7 @@
static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index ce7168b..e28dfb88 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -265,6 +265,7 @@
return err;
}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
void pxa3xx_u2d_stop_hc(struct usb_bus *host)
{
@@ -277,6 +278,7 @@
clk_disable(u2d->clk);
}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
static int pxa3xx_u2d_probe(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b5cd9e5..0737c59 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -12,7 +12,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -26,7 +25,7 @@
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
@@ -394,7 +393,7 @@
static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 0ee166b..51371b3 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -21,7 +20,7 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index bbcd905..6810cdd 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1086,7 +1086,7 @@
#ifdef CONFIG_MACH_RAUMFELD_RC
MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_controller_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1097,7 +1097,7 @@
#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_connector_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1108,7 +1108,7 @@
#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_speaker_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 72001ec..fc2c1e0 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,7 +596,7 @@
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index ebd6379..3e999e3 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -9,12 +9,13 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -23,7 +24,7 @@
#include <mach/hardware.h>
#include <mach/mfp.h>
#include <mach/mfp-pxa930.h>
-#include <mach/gpio.h>
+#include <mach/pxa95x.h>
#include "generic.h"
@@ -103,7 +104,7 @@
}
MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = SAARB_NR_IRQS,
.init_irq = pxa95x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3f8d0af..4c9a48b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1004,7 +1004,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
@@ -1016,6 +1016,6 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = stargate2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 32fb58e..ad47bb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -489,7 +489,7 @@
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd5a8ea..fd56916 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -125,7 +125,7 @@
}
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index c041750..35bbf13 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -554,7 +554,7 @@
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
@@ -564,7 +564,7 @@
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d4a3dc7..242ddae 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,7 +992,7 @@
MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = viper_map_io,
.init_irq = viper_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 5f8490a..a7539a6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -716,7 +716,7 @@
}
MACHINE_START(VPAC270, "Voipac PXA270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 937c428..70e1730 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -179,7 +179,7 @@
}
MACHINE_START(XCEP, "Iskratel XCEP")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = xcep_init,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 6c9275a..ead32c9 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -686,7 +686,8 @@
*/
PSPR = 0x0;
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+ pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
}
#else
#define z2_power_off NULL
@@ -718,7 +719,7 @@
}
MACHINE_START(ZIPIT2, "Zipit Z2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 99c49bc..498b83b 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -860,25 +860,25 @@
static struct map_desc zeus_io_desc[] __initdata = {
{
- .virtual = ZEUS_CPLD_VERSION,
+ .virtual = (unsigned long)ZEUS_CPLD_VERSION,
.pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_CPLD_ISA_IRQ,
+ .virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
.pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_CPLD_CONTROL,
+ .virtual = (unsigned long)ZEUS_CPLD_CONTROL,
.pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_PC104IO,
+ .virtual = (unsigned long)ZEUS_PC104IO,
.pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
.length = 0x00800000,
.type = MT_DEVICE,
@@ -904,7 +904,7 @@
MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = zeus_map_io,
.nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 15ec66b..31d4968 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -422,7 +422,7 @@
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index a87523d..ac1aed2 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -69,7 +69,7 @@
:
: "memory", "cc");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 90b687c..8cc372d 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -10,30 +10,17 @@
* published by the Free Software Foundation.
*/
-#if defined(CONFIG_MACH_REALVIEW_EB) || \
- defined(CONFIG_MACH_REALVIEW_PB11MP) || \
- defined(CONFIG_MACH_REALVIEW_PBA8) || \
- defined(CONFIG_MACH_REALVIEW_PBX)
-#ifndef DEBUG_LL_UART_OFFSET
+#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
#define DEBUG_LL_UART_OFFSET 0x00009000
-#elif DEBUG_LL_UART_OFFSET != 0x00009000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
-#endif
-
-#ifdef CONFIG_MACH_REALVIEW_PB1176
-#ifndef DEBUG_LL_UART_OFFSET
+#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
#define DEBUG_LL_UART_OFFSET 0x0010c000
-#elif DEBUG_LL_UART_OFFSET != 0x0010c000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
#endif
#ifndef DEBUG_LL_UART_OFFSET
#error "Unknown RealView platform"
#endif
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xfb000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
index 94ff276..40a8c178 100644
--- a/arch/arm/mach-realview/include/mach/gpio.h
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b1..026c66a 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -463,7 +463,7 @@
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 865d440..c057540 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -386,7 +386,7 @@
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b..671ad6d 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -360,7 +360,7 @@
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f3..cbf22df 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -310,7 +310,7 @@
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 3e1eb2e..63c4114 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -393,7 +393,7 @@
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 85effff..6d28cc9 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00010000
orr \rp, \rp, #0x00000fe0
orr \rv, \rp, #0xe0000000 @ virtual
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 1e0e60d..8559598 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,7 +218,7 @@
MACHINE_START(RISCPC, "Acorn-RiscPC")
/* Maintainer: Russell King */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.reserve_lp0 = 1,
.reserve_lp1 = 1,
.map_io = rpc_map_io,
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
deleted file mode 100644
index 3f33670..0000000
--- a/arch/arm/mach-s3c2400/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2400/include/mach/memory.h
- * from arch/arm/mach-rpc/include/mach/memory.h
- *
- * Copyright 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x0C000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7245a55..3700cf3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -8,7 +8,6 @@
select CPU_ARM920T
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
- select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
@@ -28,11 +27,6 @@
help
Power Management code common to S3C2410 and better
-config S3C2410_GPIO
- bool
- help
- GPIO code for S3C2410 and similar processors
-
config SIMTEC_NOR
bool
help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 8169535..782fd81 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -13,7 +13,6 @@
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
-obj-$(CONFIG_S3C2410_GPIO) += gpio.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 0d8e043..dbe43df 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -47,38 +47,26 @@
.channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -90,12 +78,10 @@
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
deleted file mode 100644
index 9664e01..0000000
--- a/arch/arm/mach-s3c2410/gpio.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config)
-{
- void __iomem *reg = S3C24XX_EINFLT0;
- unsigned long flags;
- unsigned long val;
-
- if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
- return -EINVAL;
-
- config &= 0xff;
-
- pin -= S3C2410_GPG(8);
- reg += pin & ~3;
-
- local_irq_save(flags);
-
- /* update filter width and clock source */
-
- val = __raw_readl(reg);
- val &= ~(0xff << ((pin & 3) * 8));
- val |= config << ((pin & 3) * 8);
- __raw_writel(val, reg);
-
- /* update filter enable */
-
- val = __raw_readl(S3C24XX_EXTINT2);
- val &= ~(1 << ((pin * 4) + 3));
- val |= on << ((pin * 4) + 3);
- __raw_writel(val, S3C24XX_EXTINT2);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 5882dea..4135de8 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C24XX_PA_UART
ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index f7f6b07..6fac70f 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -11,11 +11,6 @@
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* some boards require extra gpio capacity to support external
* devices that need GPIO.
*/
@@ -28,7 +23,6 @@
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
-#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index 97e42bf..fc897d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -14,7 +14,7 @@
#ifndef __ASM_ARCH_H1940_LATCH_H
#define __ASM_ARCH_H1940_LATCH_H
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 425552d..4cf495f 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -14,9 +14,53 @@
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
-#include <plat/map.h>
-#define S3C2410_ADDR(x) S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET (0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART SZ_1M
+#define S3C24XX_SZ_IIS SZ_1M
+#define S3C24XX_SZ_ADC SZ_1M
+#define S3C24XX_SZ_SPI SZ_1M
+#define S3C24XX_SZ_SDI SZ_1M
+#define S3C24XX_SZ_NAND SZ_1M
+#define S3C24XX_SZ_GPIO SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
@@ -75,10 +119,8 @@
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
-#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_PA_EBI (0x48800000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
/* physical addresses of all the chip-select areas */
@@ -100,12 +142,10 @@
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
-#define S3C24XX_PA_UART S3C2410_PA_UART
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
deleted file mode 100644
index f92b97b..0000000
--- a/arch/arm/mach-s3c2410/include/mach/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/memory.h
- * from arch/arm/mach-rpc/include/mach/memory.h
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x30000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index dabc141..7983894 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -236,7 +236,7 @@
}
MACHINE_START(AML_M5900, "AML_M5900")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e2d536..a20ae1a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -657,7 +657,7 @@
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa06..556c535 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -744,7 +744,7 @@
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 079dcaa..1dc3e32 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -586,7 +586,7 @@
/* Maintainer: Christer Weinigel <christer@weinigel.se>,
Ben Dooks <ben-linux@fluff.org>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
@@ -596,7 +596,7 @@
MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 0aa16cd..f03f3fd 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,7 +116,7 @@
MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index f44f775..367d376 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -344,7 +344,7 @@
}
MACHINE_START(QT2410, "QT2410")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index e17f033..99c9dfd 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,7 +111,7 @@
MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
* to SMDK2410 */
/* Maintainer: Jonas Dietsche */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 43c2b83..e0d0b6f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -146,7 +146,7 @@
}
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 6ccce5a..df47e8e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,7 +400,7 @@
MACHINE_START(VR1000, "Thorcom-VR1000")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2cf4e5..b8b9029 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -9,7 +9,6 @@
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
- select S3C2410_GPIO
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 6c48a91..7e4d95f 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,7 +12,6 @@
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
-obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 7abecfc..c61e326 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -50,64 +50,46 @@
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
.channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
- .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 3404a87..0000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
- unsigned long flags;
- unsigned long slpcon;
-
- offs *= 2;
-
- if (pin < S3C2410_GPB(0))
- return -EINVAL;
-
- if (pin >= S3C2410_GPF(0) &&
- pin <= S3C2410_GPG(16))
- return -EINVAL;
-
- if (pin > S3C2410_GPH(16))
- return -EINVAL;
-
- local_irq_save(flags);
-
- slpcon = __raw_readl(chip->base + 0x0C);
-
- slpcon &= ~(3 << offs);
- slpcon |= state << offs;
-
- __raw_writel(slpcon, chip->base + 0x0C);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 5eeb475..286ef17 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -655,7 +655,7 @@
MACHINE_START(JIVE, "JIVE")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 3391713..f1eec1b 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -127,7 +127,7 @@
MACHINE_START(S3C2413, "S3C2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -138,7 +138,7 @@
MACHINE_START(SMDK2412, "SMDK2412")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -149,7 +149,7 @@
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index b6ed457..1bbb1ef 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -155,7 +155,7 @@
}
MACHINE_START(VSTMS, "VSTMS")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = vstms_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index ac27ebb..a9eee53 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -245,7 +245,7 @@
MACHINE_START(SMDK2416, "SMDK2416")
/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2416_map_io,
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 50825a3..c461fb8 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -8,7 +8,6 @@
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
- select S3C2410_GPIO
select S3C2440_DMA if S3C2410_DMA
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
@@ -20,7 +19,6 @@
select CPU_ARM920T
select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
- select S3C2410_GPIO
select S3C2410_PM if PM
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 3b0529f..0e73f8f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -48,38 +48,26 @@
.channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -91,31 +79,26 @@
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
.channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d708678..74f92fc 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,7 +498,7 @@
MACHINE_START(ANUBIS, "Simtec-Anubis")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 6c98b78..38887ee 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,7 +233,7 @@
MACHINE_START(AT2440EVB, "AT2440EVB")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index c10ddf4..de1e0ff 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -595,7 +595,7 @@
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index fc2dc0b..91fe0b4 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -676,7 +676,7 @@
MACHINE_START(MINI2440, "MINI2440")
/* Maintainer: Michel Pollet <buserror@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 37dd306..61c0bf1 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,7 +151,7 @@
MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index d885363..dc142eb 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -447,7 +447,7 @@
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 27ea950..684dbb3 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -825,7 +825,7 @@
MACHINE_START(RX1950, "HP iPAQ RX1950")
/* Maintainers: Vasily Khoruzhick */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1472b1a..e19499c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,7 +218,7 @@
MACHINE_START(RX3715, "IPAQ-RX3715")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index eedfe0f..36eeb41 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,7 +175,7 @@
MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 3f65868..fe52151 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -54,68 +54,46 @@
[DMACH_SDI] = {
.name = "sdi",
.channels = MAP(S3C2443_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_0),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3_SRC2] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_1),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -124,27 +102,22 @@
[DMACH_I2S_IN] = {
.name = "i2s-sdi",
.channels = MAP(S3C2443_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2443_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels = MAP(S3C2443_DMAREQSEL_PCMIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels = MAP(S3C2443_DMAREQSEL_PCMOUT),
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels = MAP(S3C2443_DMAREQSEL_MICIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
};
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 514275e..bec107e 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -139,7 +139,7 @@
MACHINE_START(SMDK2443, "SMDK2443")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2443_map_io,
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 374e45e..c704783 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -43,16 +44,16 @@
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x36400000,
- .idmask = 0xfffff000,
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
.init_clocks = s3c6400_init_clocks,
.init_uarts = s3c6400_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
}, {
- .idcode = 0x36410100,
- .idmask = 0xffffff00,
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
.init_clocks = s3c6410_init_clocks,
.init_uarts = s3c6410_init_uarts,
@@ -140,22 +141,15 @@
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
- idcode = __raw_readl(S3C_VA_SYS + 0x118);
- if (!idcode) {
- /* S3C6400 has the ID register in a different place,
- * and needs a write before it can be read. */
+ /* detect cpu id */
+ s3c64xx_init_cpu();
- __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
- idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
- }
-
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
static __init int s3c64xx_sysdev_init(void)
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index a29e705..c0c076a 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
index 0d46e99..6e34c2f 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -12,11 +12,6 @@
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
@@ -96,5 +91,3 @@
#define BOARD_NR_GPIOS 16
#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS)
-
-#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index a1f13f0..23a1d71 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -16,6 +16,7 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s3c.h>
/*
* Post-mux Chip Select Regions Xm0CSn_
@@ -83,7 +84,6 @@
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@@ -94,16 +94,10 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
#define S3C64XX_PA_USB_HSPHY (0x7C100000)
-#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0 (S3C_VA_IRQ + 0x00)
-#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
@@ -119,7 +113,6 @@
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
deleted file mode 100644
index 4760cda..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/memory.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x50000000)
-
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index cb88643..d164a28 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,7 @@
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe..8065803 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -329,9 +329,6 @@
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_ts,
&s3c_device_timer[0],
&s3c64xx_device_iis0,
&s3c64xx_device_iis1,
@@ -766,7 +763,7 @@
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b3d93cc..19a0887 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,7 +265,7 @@
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 527f49b..fb8969a 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -205,12 +205,6 @@
.dev.platform_data = &mini6410_lcd_power_data,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static struct platform_device *mini6410_devices[] __initdata = {
&mini6410_device_eth,
&s3c_device_hsmmc0,
@@ -319,7 +313,7 @@
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
@@ -349,7 +343,7 @@
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 01c6857..c30f2e5 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,7 +97,7 @@
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 95b04b1..93170d4 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -198,12 +198,6 @@
&s3c_device_ohci,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static void __init real6410_map_io(void)
{
u32 tmp;
@@ -300,7 +294,7 @@
s3c_fb_set_platdata(&real6410_lcd_pdata);
s3c_nand_set_platdata(&real6410_nand_info);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
@@ -329,7 +323,7 @@
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 342e8df..cbb57de 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -146,7 +146,7 @@
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 5796397..04f914b 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -162,7 +162,7 @@
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642..6fd5e95 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,7 +85,7 @@
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index a9f3183..5f147c3 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -619,12 +619,6 @@
{ I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
.no = S3C64XX_GPF(15),
@@ -666,7 +660,7 @@
samsung_keypad_set_platdata(&smdk6410_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
@@ -703,7 +697,7 @@
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c0095..8a93854 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -111,6 +112,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
void __init s5p6450_map_io(void)
@@ -120,6 +122,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
/*
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index ac825e8..1fd9c79 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -21,6 +21,7 @@
#include <mach/regs-clock.h>
#include <mach/spi-clocks.h>
+#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
@@ -185,11 +186,8 @@
void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
- unsigned int id;
struct s3c64xx_spi_info *pd;
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
@@ -199,7 +197,7 @@
switch (cntrlr) {
case 0:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi0_pdata;
else
pd = &s5p6440_spi0_pdata;
@@ -207,7 +205,7 @@
s5p64x0_device_spi0.dev.platform_data = pd;
break;
case 1:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi1_pdata;
else
pd = &s5p6440_spi1_pdata;
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944..0e5b3e6 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -28,6 +28,7 @@
#include <mach/irqs.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/s3c-pl330-pdata.h>
@@ -133,11 +134,7 @@
static int __init s5p64x0_dma_init(void)
{
- unsigned int id;
-
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
- if (id == 0x50000)
+ if (soc_is_s5p6450())
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
index e7fb3b0..700dac6 100644
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -19,6 +19,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
@@ -473,14 +474,10 @@
static int __init s5p64x0_gpiolib_init(void)
{
- unsigned int chipid;
-
- chipid = __raw_readl(S5P64X0_SYS_ID);
-
s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
ARRAY_SIZE(s5p64x0_gpio_cfgs));
- if ((chipid & 0xff000) == 0x50000) {
+ if (soc_is_s5p6450()) {
samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
ARRAY_SIZE(s5p6450_gpio_2bit));
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 79b04e6..e80ba3c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#include <plat/regs-serial.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xE0000000
orr \rp, \rp, #0x00100000
ldr \rp, [\rp, #0x118 ]
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
index adb5f29..06cd3c9 100644
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5P6440_GPIO_A_NR (6)
@@ -134,6 +129,4 @@
#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
deleted file mode 100644
index 365a6eb..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index fe7380f..494e1a8 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/io.h>
+#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/gpio-cfg.h>
@@ -67,7 +68,7 @@
__raw_writel(ctrl, S5P64X0_EINT0CON0);
/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+ if (soc_is_s5p6450())
s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
else
s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8df..88857f5 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -129,12 +129,6 @@
/* To be populated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
.no = S5P6440_GPF(15),
@@ -155,7 +149,7 @@
static void __init smdk6440_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
@@ -171,7 +165,7 @@
MACHINE_START(SMDK6440, "SMDK6440")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf..e1b277b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -148,12 +148,6 @@
{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
.no = S5P6450_GPF(15),
@@ -174,7 +168,7 @@
static void __init smdk6450_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
@@ -190,7 +184,7 @@
MACHINE_START(SMDK6450, "SMDK6450")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index b2ba95d..694f759 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 29a8a12..5e1a924 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -15,11 +15,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5PC100_GPIO_A0_NR (8)
#define S5PC100_GPIO_A1_NR (5)
@@ -146,6 +141,4 @@
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
deleted file mode 100644
index bda4e79..0000000
--- a/arch/arm/mach-s5pc100/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/memory.h
- *
- * Copyright 2008 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 227d890..26f5c91 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -203,12 +203,6 @@
&s5pc100_device_spdif,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
.no = S5PC100_GPD(0),
@@ -228,7 +222,7 @@
static void __init smdkc100_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* I2C */
s3c_i2c0_set_platdata(NULL);
@@ -254,7 +248,7 @@
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 69dd87c..aaeb44a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -14,7 +14,6 @@
select S3C_PL330_DMA
select S5P_EXT_INT
select S5P_HRT
- select S5PV210_PM if PM
help
Enable S5PV210 CPU support
@@ -169,9 +168,4 @@
endmenu
-config S5PV210_PM
- bool
- help
- Power Management code common to S5PV210
-
endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 599a3c0..ef7e466 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,7 +14,7 @@
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
-obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# machine support
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec..9114572 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -20,6 +20,7 @@
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -119,6 +120,7 @@
void __init s5pv210_map_io(void)
{
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+ init_consistent_dma_size(14 << 20);
/* initialise device information early */
s5pv210_default_sdhci0();
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 169fe65..79e5559 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index a5a1e33..6c8b903 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
/* GPIO bank sizes */
@@ -142,6 +137,4 @@
#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 7b5fcf0..2d3cfa2 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -14,7 +14,6 @@
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/*
* Sparsemem support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 509627f..5811a96 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -678,7 +678,7 @@
/* Maintainers:
Marek Szyprowski <m.szyprowski@samsung.com>
Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51..061cc7e 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -897,7 +897,7 @@
MACHINE_START(GONI, "GONI")
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 6c412c8..f7266bb 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -136,7 +136,7 @@
MACHINE_START(SMDKC110, "SMDKC110")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 5e011fc..a9106c3 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -265,12 +265,6 @@
/* To Be Updated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
.no = S5PV210_GPD0(3),
@@ -296,7 +290,7 @@
smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
@@ -319,7 +313,7 @@
MACHINE_START(SMDKV210, "SMDKV210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 925fc0d..97cc066 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -125,7 +125,7 @@
MACHINE_START(TORBRECK, "TORBRECK")
/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 0063178..ed7408d 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 6290ce2..3dd133f 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -446,7 +446,7 @@
MACHINE_START(ASSABET, "Intel-Assabet")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_assabet,
.map_io = assabet_map_io,
.init_irq = sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..bda83e1 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,7 +302,7 @@
}
MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = badge4_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e21f347..5fa5ae1 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -9,6 +9,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +25,6 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
-#include <asm/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
deleted file mode 100644
index 0d3829a..0000000
--- a/arch/arm/mach-sa1100/gpio.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/gpio.c
- *
- * Generic SA-1100 GPIO handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/gpio.h>
-#include <mach/hardware.h>
-#include "generic.h"
-
-static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- return GPLR & GPIO_GPIO(offset);
-}
-
-static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (value)
- GPSR = GPIO_GPIO(offset);
- else
- GPCR = GPIO_GPIO(offset);
-}
-
-static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- GPDR &= ~GPIO_GPIO(offset);
- local_irq_restore(flags);
- return 0;
-}
-
-static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- sa1100_gpio_set(chip, offset, value);
- GPDR |= GPIO_GPIO(offset);
- local_irq_restore(flags);
- return 0;
-}
-
-static struct gpio_chip sa1100_gpio_chip = {
- .label = "gpio",
- .direction_input = sa1100_direction_input,
- .direction_output = sa1100_direction_output,
- .set = sa1100_gpio_set,
- .get = sa1100_gpio_get,
- .base = 0,
- .ngpio = GPIO_MAX + 1,
-};
-
-void __init sa1100_init_gpio(void)
-{
- gpiochip_add(&sa1100_gpio_chip);
-}
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 03d7376..b30733a 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,7 +84,7 @@
}
MACHINE_START(H3100, "Compaq iPAQ H3100")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3100_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 965f64a..6fd324d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,7 +125,7 @@
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3600_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..30f4a55 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,7 +195,7 @@
*/
MACHINE_START(HACKKIT, "HackKit Cpu Board")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = hackkit_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 0cd0fc9..530772d 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
moveq \rp, #0x80000000 @ physical base address
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 7befc10..7036318 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -28,6 +28,8 @@
#include <asm/irq.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
@@ -51,7 +53,5 @@
#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
(IRQ_GPIO11 - 11 + gpio))
-#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
- (irq - IRQ_GPIO11 + 11))
#endif
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 176c066..0bb520d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,7 +364,7 @@
MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = jornada720_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..5bc59d0 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,7 +61,7 @@
}
MACHINE_START(LART, "LART")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = lart_map_io,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 72087f0..032f388 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -111,7 +111,7 @@
}
MACHINE_START(NANOENGINE, "BSE nanoEngine")
- .boot_params = 0xc0000000,
+ .atag_offset = 0x100,
.map_io = nanoengine_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 7917b24..1cccbf5 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,7 +82,7 @@
}
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = shannon_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 34659f3..4790f3f 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -392,7 +392,7 @@
MACHINE_START(SIMPAD, "Simpad")
/* Maintainer: Holger Freyther */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = simpad_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c..feda3ca 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,7 +152,7 @@
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
- .boot_params = 0x08003000,
+ .atag_offset = 0x3000,
.map_io = shark_map_io,
.init_irq = shark_init_irq,
.timer = &shark_timer,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index a473f55..20eb2bf 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xe0000000
orr \rp, \rp, #0x000003f8
mov \rv, \rp
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cdfdd62..475342b 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -37,6 +37,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
@@ -354,14 +355,17 @@
.flags = IORESOURCE_MEM,
},
[1] = {
+ .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = gic_spi(83),
.flags = IORESOURCE_IRQ,
},
[2] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = gic_spi(84),
.flags = IORESOURCE_IRQ,
},
[3] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = gic_spi(85),
.flags = IORESOURCE_IRQ,
},
@@ -397,14 +401,17 @@
.flags = IORESOURCE_MEM,
},
[1] = {
+ .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = gic_spi(87),
.flags = IORESOURCE_IRQ,
},
[2] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = gic_spi(88),
.flags = IORESOURCE_IRQ,
},
[3] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = gic_spi(89),
.flags = IORESOURCE_IRQ,
},
@@ -447,6 +454,8 @@
static void __init ag5evm_map_io(void)
{
iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh73a0_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 7e90d06..5b7edad 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -43,6 +43,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <linux/pm_clock.h>
+#include <linux/dma-mapping.h>
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
@@ -1171,6 +1172,8 @@
static void __init ap4evb_map_io(void)
{
iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index ef4613b..8b620bf 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -32,6 +32,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7367.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -260,6 +261,8 @@
static void __init g3evm_map_io(void)
{
iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 8e3c555..7719ddc 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -33,6 +33,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7377.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -274,6 +275,8 @@
static void __init g4evm_map_io(void)
{
iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 00273da..3689ad2 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -45,6 +45,7 @@
#include <linux/tca6416_keypad.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
@@ -1071,14 +1072,17 @@
.flags = IORESOURCE_MEM,
},
[1] = {
+ .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
.flags = IORESOURCE_IRQ,
},
[2] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
.flags = IORESOURCE_IRQ,
},
[3] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
.flags = IORESOURCE_IRQ,
},
@@ -1122,14 +1126,17 @@
.flags = IORESOURCE_MEM,
},
[1] = {
+ .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */
.flags = IORESOURCE_IRQ,
},
[2] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
.flags = IORESOURCE_IRQ,
},
[3] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
.flags = IORESOURCE_IRQ,
},
@@ -1382,6 +1389,8 @@
static void __init mackerel_map_io(void)
{
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
@@ -1588,6 +1597,7 @@
sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
+ sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S
index cac0a7a..1a1c00c 100644
--- a/arch/arm/mach-shmobile/entry-intc.S
+++ b/arch/arm/mach-shmobile/entry-intc.S
@@ -51,7 +51,4 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
arch_irq_handler shmobile_handle_irq_intc
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index d791f10..8d4a416 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -27,8 +27,5 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 2b1bb9e..7bf0890 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -18,31 +18,15 @@
#ifdef CONFIG_GPIOLIB
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned int irq)
{
return -ENOSYS;
}
+#else
+
+#define __ARM_GPIOLIB_COMPLEX
+
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index ad00c3c..0ffbe81 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,7 +4,4 @@
#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
-/* DMA memory at 0xf6000000 - 0xffdfffff */
-#define CONSISTENT_DMA_SIZE (158 << 20)
-
#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 3ffdbc9..be1ade7 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -74,6 +74,8 @@
int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
{
+ cpu = cpu_logical_map(cpu);
+
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
@@ -87,6 +89,8 @@
void __init sh73a0_smp_prepare_cpus(void)
{
+ int cpu = cpu_logical_map(0);
+
scu_enable(scu_base_addr());
/* Map the reset vector (in headsmp.S) */
@@ -94,5 +98,5 @@
__raw_writel(__pa(shmobile_secondary_vector), __io(SBAR));
/* enable cache coherency on CPU0 */
- modify_scu_cpu_psr(0, 3 << (0 * 8));
+ modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h
deleted file mode 100644
index 5173522..0000000
--- a/arch/arm/mach-spear3xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/memory.h
- *
- * Memory map for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 69006f6..a5ff98e 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -64,7 +64,7 @@
}
MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index c8684ce..45d180d 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -70,7 +70,7 @@
}
MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index a12b353..2287984 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -68,7 +68,7 @@
}
MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h
deleted file mode 100644
index 781f088..0000000
--- a/arch/arm/mach-spear6xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/memory.h
- *
- * Memory map for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index f19cefe9..8238fe3 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -43,7 +43,7 @@
}
MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
.timer = &spear6xx_timer,
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
index 4cb3c2d..777a5bb 100644
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -73,7 +73,7 @@
}
MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = tcc8k_map_io,
.init_irq = tcc8k_init_irq,
.init_machine = tcc8k_init,
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d82ebab..91aff7c 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -69,6 +69,12 @@
help
Support for the Wario version of Seaboard
+config MACH_VENTANA
+ bool "Ventana board"
+ select MACH_TEGRA_DT
+ help
+ Support for the nVidia Ventana development platform
+
choice
prompt "Low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f11b910..91a07e1 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -31,6 +31,7 @@
obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o
obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o
+obj-${CONFIG_MACH_TEGRA_DT} += board-seaboard-pinmux.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 5e870d2..bd12c9f 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -4,3 +4,4 @@
dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
+dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 9f47e04..d368f8d 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -47,7 +47,7 @@
void harmony_pinmux_init(void);
void seaboard_pinmux_init(void);
-
+void ventana_pinmux_init(void);
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
@@ -80,9 +80,19 @@
{}
};
+static struct {
+ char *machine;
+ void (*init)(void);
+} pinmux_configs[] = {
+ { "nvidia,harmony", harmony_pinmux_init },
+ { "nvidia,seaboard", seaboard_pinmux_init },
+ { "nvidia,ventana", ventana_pinmux_init },
+};
+
static void __init tegra_dt_init(void)
{
struct device_node *node;
+ int i;
node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
TEGRA_ARM_INT_DIST_BASE);
@@ -91,10 +101,15 @@
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- if (of_machine_is_compatible("nvidia,harmony"))
- harmony_pinmux_init();
- else if (of_machine_is_compatible("nvidia,seaboard"))
- seaboard_pinmux_init();
+ for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
+ if (of_machine_is_compatible(pinmux_configs[i].machine)) {
+ pinmux_configs[i].init();
+ break;
+ }
+ }
+
+ WARN(i == ARRAY_SIZE(pinmux_configs),
+ "Unknown platform! Pinmuxing not initialized\n");
/*
* Finished with the static registrations now; fill in the missing
@@ -106,6 +121,7 @@
static const char * tegra_dt_board_compat[] = {
"nvidia,harmony",
"nvidia,seaboard",
+ "nvidia,ventana",
NULL
};
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 9c27b95..6db7d69 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -24,12 +24,10 @@
#include <mach/pinmux.h>
#include "board.h"
+#include "board-harmony.h"
#ifdef CONFIG_TEGRA_PCI
-/* GPIO 3 of the PMIC */
-#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2)
-
static int __init harmony_pcie_init(void)
{
struct regulator *regulator = NULL;
@@ -38,11 +36,11 @@
if (!machine_is_harmony())
return 0;
- err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05");
+ err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
if (err)
return err;
- gpio_direction_output(EN_VDD_1V05_GPIO, 1);
+ gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
regulator = regulator_get(NULL, "pex_clk");
if (IS_ERR_OR_NULL(regulator))
@@ -68,7 +66,7 @@
regulator_disable(regulator);
regulator_put(regulator);
err_reg:
- gpio_free(EN_VDD_1V05_GPIO);
+ gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
return err;
}
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 4d63e2e..e99b456 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-harmony.h"
+#include "devices.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
@@ -155,6 +161,8 @@
void harmony_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 5ad8b2f..21d1285 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -18,10 +18,11 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-
+#include <linux/io.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6586x.h>
+#include <mach/iomap.h>
#include <mach/irqs.h>
#include "board-harmony.h"
@@ -113,6 +114,16 @@
int __init harmony_regulator_init(void)
{
+ void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
+ u32 pmc_ctrl;
+
+ /*
+ * Configure the power management controller to trigger PMU
+ * interrupts when low
+ */
+ pmc_ctrl = readl(pmc + PMC_CTRL);
+ writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL);
+
i2c_register_board_info(3, harmony_regulators, 1);
return 0;
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index c78ce41..f0bdc5e 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -49,7 +49,8 @@
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -117,6 +118,7 @@
&tegra_sdhci_device1,
&tegra_sdhci_device2,
&tegra_sdhci_device4,
+ &tegra_ehci3_device,
&tegra_i2s_device1,
&tegra_das_device,
&tegra_pcm_device,
@@ -140,6 +142,7 @@
{ "pll_a_out0", "pll_a", 11289600, true },
{ "cdev1", NULL, 0, true },
{ "i2s1", "pll_a_out0", 11289600, false},
+ { "usb3", "clk_m", 12000000, true },
{ NULL, NULL, 0, 0},
};
@@ -179,7 +182,7 @@
}
MACHINE_START(HARMONY, "harmony")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_harmony_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
index d85142e..139d96c9 100644
--- a/arch/arm/mach-tegra/board-harmony.h
+++ b/arch/arm/mach-tegra/board-harmony.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_HARMONY_H
#define _MACH_TEGRA_BOARD_HARMONY_H
+#include <mach/gpio-tegra.h>
+
#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_))
@@ -31,6 +33,7 @@
#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2
#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0
#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1
+#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2)
void harmony_pinmux_init(void);
int harmony_regulator_init(void);
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..fb20894 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-paz00.h"
+#include "devices.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,15 +141,25 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
{ .gpio = TEGRA_ULPI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_PWRN, .enable = true },
+ { .gpio = TEGRA_WIFI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_LED, .enable = true },
};
void paz00_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 5e6bc77..55c55ba 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -26,6 +26,8 @@
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/rfkill-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,7 +37,6 @@
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "board-paz00.h"
@@ -45,10 +46,22 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
+ /* serial port on JP1 */
+ .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
+ .mapbase = TEGRA_UARTA_BASE,
+ .irq = INT_UARTA,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 216000000,
+ }, {
+ /* serial port on mini-pcie */
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -65,10 +78,48 @@
},
};
+static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
+ .name = "wifi_rfkill",
+ .reset_gpio = TEGRA_WIFI_RST,
+ .shutdown_gpio = TEGRA_WIFI_PWRN,
+ .type = RFKILL_TYPE_WLAN,
+};
+
+static struct platform_device wifi_rfkill_device = {
+ .name = "rfkill_gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wifi_rfkill_platform_data,
+ },
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "wifi-led",
+ .default_trigger = "rfkill0",
+ .gpio = TEGRA_WIFI_LED,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
- &tegra_sdhci_device1,
&tegra_sdhci_device4,
+ &tegra_sdhci_device1,
+ &wifi_rfkill_device,
+ &leds_gpio,
};
static void paz00_i2c_init(void)
@@ -94,7 +145,14 @@
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
+ { "uarta", "pll_p", 216000000, true },
{ "uartd", "pll_p", 216000000, true },
+
+ { "pll_p_out4", "pll_p", 24000000, true },
+ { "usbd", "clk_m", 12000000, false },
+ { "usb2", "clk_m", 12000000, false },
+ { "usb3", "clk_m", 12000000, false },
+
{ NULL, NULL, 0, 0},
};
@@ -127,7 +185,7 @@
}
MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_paz00_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index d4ff39d..8aff06e 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,11 +17,21 @@
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
+#include <mach/gpio-tegra.h>
+
+/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+
+/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
+/* WIFI */
+#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
+#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
+#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
+
void paz00_pinmux_init(void);
#endif
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 0bda495..fbce31d 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2010 NVIDIA Corporation
+ * Copyright (C) 2010,2011 NVIDIA Corporation
+ * Copyright (C) 2011 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -21,6 +22,7 @@
#include "gpio-names.h"
#include "board-seaboard.h"
+#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
@@ -49,7 +51,7 @@
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -133,7 +135,7 @@
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -157,24 +159,83 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static __initdata struct tegra_pingroup_config ventana_pinmux[] = {
+ {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LSC1, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LSCK, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_LSDA, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SLXK, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
-
-static struct tegra_gpio_table gpio_table[] = {
+static struct tegra_gpio_table common_gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_USB1, .enable = true },
};
-void __init seaboard_pinmux_init(void)
+static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
{
+ int i, j;
+ struct tegra_pingroup_config *new_pingroup, *base_pingroup;
+
+ /* Update base seaboard pinmux table with secondary board
+ * specific pinmux table table.
+ */
+ for (i = 0; i < size; i++) {
+ new_pingroup = &newtbl[i];
+ for (j = 0; j < ARRAY_SIZE(seaboard_pinmux); j++) {
+ base_pingroup = &seaboard_pinmux[j];
+ if (new_pingroup->pingroup == base_pingroup->pingroup) {
+ *base_pingroup = *new_pingroup;
+ break;
+ }
+ }
+ }
+}
+
+void __init seaboard_common_pinmux_init(void)
+{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
ARRAY_SIZE(seaboard_drive_pinmux));
- tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
+ tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table));
}
+
+void __init seaboard_pinmux_init(void)
+{
+ seaboard_common_pinmux_init();
+}
+
+void __init ventana_pinmux_init(void)
+{
+ update_pinmux(ventana_pinmux, ARRAY_SIZE(ventana_pinmux));
+ seaboard_common_pinmux_init();
+}
+
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 56cbabf..bf13ea3 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -25,9 +25,12 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <sound/wm8903.h>
+
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
+#include <mach/tegra_wm8903_pdata.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,7 +44,8 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
/* Memory and IRQ filled in before registration */
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -62,6 +66,12 @@
/* name parent rate enabled */
{ "uartb", "pll_p", 216000000, true},
{ "uartd", "pll_p", 216000000, true},
+ { "pll_a", "pll_p_out1", 56448000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "cdev1", NULL, 0, true },
+ { "i2s1", "pll_a_out0", 11289600, false},
+ { "usbd", "clk_m", 12000000, true},
+ { "usb3", "clk_m", 12000000, true},
{ NULL, NULL, 0, 0},
};
@@ -117,6 +127,22 @@
.is_8bit = 1,
};
+static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
+ .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
+ .gpio_hp_det = TEGRA_GPIO_HP_DET,
+ .gpio_hp_mute = -1,
+ .gpio_int_mic_en = -1,
+ .gpio_ext_mic_en = -1,
+};
+
+static struct platform_device seaboard_audio_device = {
+ .name = "tegra-snd-wm8903",
+ .id = 0,
+ .dev = {
+ .platform_data = &seaboard_audio_pdata,
+ },
+};
+
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
@@ -124,6 +150,10 @@
&tegra_sdhci_device3,
&tegra_sdhci_device1,
&seaboard_gpio_keys_device,
+ &tegra_i2s_device1,
+ &tegra_das_device,
+ &tegra_pcm_device,
+ &seaboard_audio_device,
};
static struct i2c_board_info __initdata isl29018_device = {
@@ -135,12 +165,56 @@
I2C_BOARD_INFO("adt7461", 0x4c),
};
+static struct wm8903_platform_data wm8903_pdata = {
+ .irq_active_low = 0,
+ .micdet_cfg = 0,
+ .micdet_delay = 100,
+ .gpio_base = SEABOARD_GPIO_WM8903(0),
+ .gpio_cfg = {
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ 0,
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ },
+};
+
+static struct i2c_board_info __initdata wm8903_device = {
+ I2C_BOARD_INFO("wm8903", 0x1a),
+ .platform_data = &wm8903_pdata,
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
+};
+
+static int seaboard_ehci_init(void)
+{
+ int gpio_status;
+
+ gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO FAILED\n");
+ WARN_ON(1);
+ }
+
+ gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
+ WARN_ON(1);
+ }
+ gpio_set_value(TEGRA_GPIO_USB1, 1);
+
+ platform_device_register(&tegra_ehci1_device);
+ platform_device_register(&tegra_ehci3_device);
+
+ return 0;
+}
+
static void __init seaboard_i2c_init(void)
{
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
+ i2c_register_board_info(0, &wm8903_device, 1);
i2c_register_board_info(3, &adt7461_device, 1);
@@ -161,6 +235,8 @@
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
+
+ seaboard_ehci_init();
}
static void __init tegra_seaboard_init(void)
@@ -182,6 +258,9 @@
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
+ seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
+ tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
+
seaboard_common_init();
seaboard_i2c_init();
@@ -201,7 +280,7 @@
MACHINE_START(SEABOARD, "seaboard")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -210,7 +289,7 @@
MACHINE_END
MACHINE_START(KAEN, "kaen")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -219,7 +298,7 @@
MACHINE_END
MACHINE_START(WARIO, "wario")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index d8415e1..4c45d4c 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -17,6 +17,11 @@
#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
#define _MACH_TEGRA_BOARD_SEABOARD_H
+#include <mach/gpio-tegra.h>
+
+#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
+#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
+
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
@@ -31,10 +36,11 @@
#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
-
-#define TPS_GPIO_BASE TEGRA_NR_GPIOS
-
-#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2)
+#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2)
+#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
+#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
+#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
+#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
void seaboard_pinmux_init(void);
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 47c596c..4969dd2 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -13,15 +13,15 @@
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/pinmux.h>
-#include <mach/gpio.h>
#include "gpio-names.h"
#include "board-trimslice.h"
+#include "devices.h"
static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -142,6 +142,11 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
@@ -152,6 +157,7 @@
void __init trimslice_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 652c340..1a6617b 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -32,7 +32,6 @@
#include <mach/iomap.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "clock.h"
@@ -46,7 +45,8 @@
.membase = IO_ADDRESS(TEGRA_UARTA_BASE),
.mapbase = TEGRA_UARTA_BASE,
.irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -171,7 +171,7 @@
}
MACHINE_START(TRIMSLICE, "trimslice")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_trimslice_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
index 7a7dee8..50f128d 100644
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ b/arch/arm/mach-tegra/board-trimslice.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
#define _MACH_TEGRA_BOARD_TRIMSLICE_H
+#include <mach/gpio-tegra.h>
+
#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index d5e3f89..690b888 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -61,7 +61,7 @@
{ NULL, NULL, 0, 0},
};
-void __init tegra_init_cache(void)
+static void __init tegra_init_cache(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 0e0fd4d..bb5ce39 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -56,12 +56,12 @@
static DEFINE_MUTEX(tegra_cpu_lock);
static bool is_suspended;
-int tegra_verify_speed(struct cpufreq_policy *policy)
+static int tegra_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, freq_table);
}
-unsigned int tegra_getspeed(unsigned int cpu)
+static unsigned int tegra_getspeed(unsigned int cpu)
{
unsigned long rate;
@@ -129,7 +129,7 @@
unsigned int target_freq,
unsigned int relation)
{
- int idx;
+ unsigned int idx;
unsigned int freq;
int ret = 0;
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..7a2a02d 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -29,7 +29,93 @@
#include <mach/iomap.h>
#include <mach/dma.h>
#include <mach/usb_phy.h>
+
#include "gpio-names.h"
+#include "devices.h"
+
+static struct resource gpio_resource[] = {
+ [0] = {
+ .start = TEGRA_GPIO_BASE,
+ .end = TEGRA_GPIO_BASE + TEGRA_GPIO_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_GPIO1,
+ .end = INT_GPIO1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = INT_GPIO2,
+ .end = INT_GPIO2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = INT_GPIO3,
+ .end = INT_GPIO3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [4] = {
+ .start = INT_GPIO4,
+ .end = INT_GPIO4,
+ .flags = IORESOURCE_IRQ,
+ },
+ [5] = {
+ .start = INT_GPIO5,
+ .end = INT_GPIO5,
+ .flags = IORESOURCE_IRQ,
+ },
+ [6] = {
+ .start = INT_GPIO6,
+ .end = INT_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+ [7] = {
+ .start = INT_GPIO7,
+ .end = INT_GPIO7,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device tegra_gpio_device = {
+ .name = "tegra-gpio",
+ .id = -1,
+ .resource = gpio_resource,
+ .num_resources = ARRAY_SIZE(gpio_resource),
+};
+
+static struct resource pinmux_resource[] = {
+ [0] = {
+ /* Tri-state registers */
+ .start = TEGRA_APB_MISC_BASE + 0x14,
+ .end = TEGRA_APB_MISC_BASE + 0x20 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* Mux registers */
+ .start = TEGRA_APB_MISC_BASE + 0x80,
+ .end = TEGRA_APB_MISC_BASE + 0x9c + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ /* Pull-up/down registers */
+ .start = TEGRA_APB_MISC_BASE + 0xa0,
+ .end = TEGRA_APB_MISC_BASE + 0xb0 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ /* Pad control registers */
+ .start = TEGRA_APB_MISC_BASE + 0x868,
+ .end = TEGRA_APB_MISC_BASE + 0x90c + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device tegra_pinmux_device = {
+ .name = "tegra-pinmux",
+ .id = -1,
+ .resource = pinmux_resource,
+ .num_resources = ARRAY_SIZE(pinmux_resource),
+};
static struct resource i2c_resource1[] = {
[0] = {
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 4a7dc0a..873ecb2 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -21,6 +21,8 @@
#include <linux/platform_device.h>
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
extern struct platform_device tegra_sdhci_device1;
extern struct platform_device tegra_sdhci_device2;
extern struct platform_device tegra_sdhci_device3;
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index f4ef5eb..c0cf967 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -105,13 +105,17 @@
#define NV_DMA_MAX_TRASFER_SIZE 0x10000
-const unsigned int ahb_addr_wrap_table[8] = {
+static const unsigned int ahb_addr_wrap_table[8] = {
0, 32, 64, 128, 256, 512, 1024, 2048
};
-const unsigned int apb_addr_wrap_table[8] = {0, 1, 2, 4, 8, 16, 32, 64};
+static const unsigned int apb_addr_wrap_table[8] = {
+ 0, 1, 2, 4, 8, 16, 32, 64
+};
-const unsigned int bus_width_table[5] = {8, 16, 32, 64, 128};
+static const unsigned int bus_width_table[5] = {
+ 8, 16, 32, 64, 128
+};
#define TEGRA_DMA_NAME_SIZE 16
struct tegra_dma_channel {
@@ -157,7 +161,7 @@
return;
}
-void tegra_dma_stop(struct tegra_dma_channel *ch)
+static void tegra_dma_stop(struct tegra_dma_channel *ch)
{
u32 csr;
u32 status;
@@ -174,7 +178,7 @@
writel(status, ch->addr + APB_DMA_CHAN_STA);
}
-int tegra_dma_cancel(struct tegra_dma_channel *ch)
+static int tegra_dma_cancel(struct tegra_dma_channel *ch)
{
u32 csr;
unsigned long irq_flags;
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index e0ebe65..619abc6 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
#include <mach/io.h>
#include <mach/iomap.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =IO_APB_PHYS @ physical
ldr \rv, =IO_APB_VIRT @ virtual
orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
new file mode 100644
index 0000000..87d37fd
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_GPIO_TEGRA_H
+#define __MACH_TEGRA_GPIO_TEGRA_H
+
+#include <linux/types.h>
+#include <mach/irqs.h>
+
+#define TEGRA_NR_GPIOS INT_GPIO_NR
+
+#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
+
+struct tegra_gpio_table {
+ int gpio; /* GPIO number */
+ bool enable; /* Enable for GPIO at init? */
+};
+
+void tegra_gpio_config(struct tegra_gpio_table *table, int num);
+void tegra_gpio_enable(int gpio);
+void tegra_gpio_disable(int gpio);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
index 196f114..40a8c178 100644
--- a/arch/arm/mach-tegra/include/mach/gpio.h
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -1,60 +1 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_GPIO_H
-#define __MACH_TEGRA_GPIO_H
-
-#include <linux/init.h>
-#include <mach/irqs.h>
-
-#define TEGRA_NR_GPIOS INT_GPIO_NR
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE)
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
- if (gpio < TEGRA_NR_GPIOS)
- return INT_GPIO_BASE + gpio;
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR))
- return irq - INT_GPIO_BASE;
- return -EINVAL;
-}
-
-struct tegra_gpio_table {
- int gpio; /* GPIO number */
- bool enable; /* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
-#endif
+/* empty */
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
index 4cea223..35a011f 100644
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -33,20 +33,26 @@
*
*/
+#ifdef __ASSEMBLY__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
#define IO_IRAM_PHYS 0x40000000
-#define IO_IRAM_VIRT 0xFE400000
+#define IO_IRAM_VIRT IOMEM(0xFE400000)
#define IO_IRAM_SIZE SZ_256K
#define IO_CPU_PHYS 0x50040000
-#define IO_CPU_VIRT 0xFE000000
+#define IO_CPU_VIRT IOMEM(0xFE000000)
#define IO_CPU_SIZE SZ_16K
#define IO_PPSB_PHYS 0x60000000
-#define IO_PPSB_VIRT 0xFE200000
+#define IO_PPSB_VIRT IOMEM(0xFE200000)
#define IO_PPSB_SIZE SZ_1M
#define IO_APB_PHYS 0x70000000
-#define IO_APB_VIRT 0xFE300000
+#define IO_APB_VIRT IOMEM(0xFE300000)
#define IO_APB_SIZE SZ_1M
#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
@@ -61,7 +67,7 @@
IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) : \
IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ? \
IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) : \
- 0)
+ NULL)
#ifndef __ASSEMBLER__
@@ -71,7 +77,7 @@
void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
void tegra_iounmap(volatile void __iomem *addr);
-#define IO_ADDRESS(n) ((void __iomem *) IO_TO_VIRT(n))
+#define IO_ADDRESS(n) (IO_TO_VIRT(n))
#ifdef CONFIG_TEGRA_PCI
extern void __iomem *tegra_pcie_io_base;
diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h
deleted file mode 100644
index 537db3aa..0000000
--- a/arch/arm/mach-tegra/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/memory.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_MEMORY_H
-#define __MACH_TEGRA_MEMORY_H
-
-/* physical offset of RAM */
-#define PLAT_PHYS_OFFSET UL(0)
-
-#endif
-
diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h
index defd877..bb7dfdb 100644
--- a/arch/arm/mach-tegra/include/mach/pinmux.h
+++ b/arch/arm/mach-tegra/include/mach/pinmux.h
@@ -199,6 +199,7 @@
struct tegra_drive_pingroup_desc {
const char *name;
+ s16 reg_bank;
s16 reg;
};
@@ -207,6 +208,9 @@
int funcs[4];
int func_safe;
int vddio;
+ s16 tri_bank; /* Register bank the tri_reg exists within */
+ s16 mux_bank; /* Register bank the mux_reg exists within */
+ s16 pupd_bank; /* Register bank the pupd_reg exists within */
s16 tri_reg; /* offset into the TRISTATE_REG_* register bank */
s16 mux_reg; /* offset into the PIN_MUX_CTL_* register bank */
s16 pupd_reg; /* offset into the PULL_UPDOWN_REG_* register bank */
diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h
index 401d1b7..39c396d 100644
--- a/arch/arm/mach-tegra/include/mach/powergate.h
+++ b/arch/arm/mach-tegra/include/mach/powergate.h
@@ -31,7 +31,6 @@
int tegra_powergate_power_on(int id);
int tegra_powergate_power_off(int id);
-bool tegra_powergate_is_powered(int id);
int tegra_powergate_remove_clamping(int id);
/* Must be called with clk disabled, and returns with clk enabled */
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index ea50fe2..5489f8b 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -31,25 +31,25 @@
static struct map_desc tegra_io_desc[] __initdata = {
{
- .virtual = IO_PPSB_VIRT,
+ .virtual = (unsigned long)IO_PPSB_VIRT,
.pfn = __phys_to_pfn(IO_PPSB_PHYS),
.length = IO_PPSB_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_APB_VIRT,
+ .virtual = (unsigned long)IO_APB_VIRT,
.pfn = __phys_to_pfn(IO_APB_PHYS),
.length = IO_APB_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_CPU_VIRT,
+ .virtual = (unsigned long)IO_CPU_VIRT,
.pfn = __phys_to_pfn(IO_CPU_PHYS),
.length = IO_CPU_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_IRAM_VIRT,
+ .virtual = (unsigned long)IO_IRAM_VIRT,
.pfn = __phys_to_pfn(IO_IRAM_PHYS),
.length = IO_IRAM_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index f1f699d..f5aa173 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -41,6 +41,8 @@
#include <mach/clk.h>
#include <mach/powergate.h>
+#include "board.h"
+
/* register definitions */
#define AFI_OFFSET 0x3800
#define PADS_OFFSET 0x3000
@@ -150,9 +152,9 @@
static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
#define pmc_writel(value, reg) \
- __raw_writel(value, (u32)reg_pmc_base + (reg))
+ __raw_writel(value, reg_pmc_base + (reg))
#define pmc_readl(reg) \
- __raw_readl((u32)reg_pmc_base + (reg))
+ __raw_readl(reg_pmc_base + (reg))
/*
* Tegra2 defines 1GB in the AXI address map for PCIe.
@@ -460,7 +462,7 @@
struct tegra_pcie_port *pp;
if (nr >= tegra_pcie.num_ports)
- return 0;
+ return NULL;
pp = tegra_pcie.port + nr;
pp->root_bus_nr = sys->busnr;
diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-t2-tables.c
index a475367..a0dc2bc 100644
--- a/arch/arm/mach-tegra/pinmux-t2-tables.c
+++ b/arch/arm/mach-tegra/pinmux-t2-tables.c
@@ -31,10 +31,16 @@
#include <mach/pinmux.h>
#include <mach/suspend.h>
+#define TRISTATE_REG_A 0x14
+#define PIN_MUX_CTL_REG_A 0x80
+#define PULLUPDOWN_REG_A 0xa0
+#define PINGROUP_REG_A 0x868
+
#define DRIVE_PINGROUP(pg_name, r) \
[TEGRA_DRIVE_PINGROUP_ ## pg_name] = { \
.name = #pg_name, \
- .reg = r \
+ .reg_bank = 3, \
+ .reg = ((r) - PINGROUP_REG_A) \
}
const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
@@ -90,11 +96,14 @@
TEGRA_MUX_ ## f3, \
}, \
.func_safe = TEGRA_MUX_ ## f_safe, \
- .tri_reg = tri_r, \
+ .tri_bank = 0, \
+ .tri_reg = ((tri_r) - TRISTATE_REG_A), \
.tri_bit = tri_b, \
- .mux_reg = mux_r, \
+ .mux_bank = 1, \
+ .mux_reg = ((mux_r) - PIN_MUX_CTL_REG_A), \
.mux_bit = mux_b, \
- .pupd_reg = pupd_r, \
+ .pupd_bank = 2, \
+ .pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A), \
.pupd_bit = pupd_b, \
}
@@ -217,62 +226,3 @@
PINGROUP(XM2C, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 30),
PINGROUP(XM2D, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 28),
};
-
-#ifdef CONFIG_PM
-#define TRISTATE_REG_A 0x14
-#define TRISTATE_REG_NUM 4
-#define PIN_MUX_CTL_REG_A 0x80
-#define PIN_MUX_CTL_REG_NUM 8
-#define PULLUPDOWN_REG_A 0xa0
-#define PULLUPDOWN_REG_NUM 5
-
-static u32 pinmux_reg[TRISTATE_REG_NUM + PIN_MUX_CTL_REG_NUM +
- PULLUPDOWN_REG_NUM +
- ARRAY_SIZE(tegra_soc_drive_pingroups)];
-
-static inline unsigned long pg_readl(unsigned long offset)
-{
- return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
-}
-
-static inline void pg_writel(unsigned long value, unsigned long offset)
-{
- writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
-}
-
-void tegra_pinmux_suspend(void)
-{
- unsigned int i;
- u32 *ctx = pinmux_reg;
-
- for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
- *ctx++ = pg_readl(PIN_MUX_CTL_REG_A + i*4);
-
- for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
- *ctx++ = pg_readl(PULLUPDOWN_REG_A + i*4);
-
- for (i = 0; i < TRISTATE_REG_NUM; i++)
- *ctx++ = pg_readl(TRISTATE_REG_A + i*4);
-
- for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++)
- *ctx++ = pg_readl(tegra_soc_drive_pingroups[i].reg);
-}
-
-void tegra_pinmux_resume(void)
-{
- unsigned int i;
- u32 *ctx = pinmux_reg;
-
- for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
- pg_writel(*ctx++, PIN_MUX_CTL_REG_A + i*4);
-
- for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
- pg_writel(*ctx++, PULLUPDOWN_REG_A + i*4);
-
- for (i = 0; i < TRISTATE_REG_NUM; i++)
- pg_writel(*ctx++, TRISTATE_REG_A + i*4);
-
- for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++)
- pg_writel(*ctx++, tegra_soc_drive_pingroups[i].reg);
-}
-#endif
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index f80d507..1d20165 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,7 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <mach/iomap.h>
#include <mach/pinmux.h>
@@ -169,15 +170,17 @@
}
}
+static int nbanks;
+static void __iomem **regs;
-static inline unsigned long pg_readl(unsigned long offset)
+static inline u32 pg_readl(u32 bank, u32 reg)
{
- return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+ return readl(regs[bank] + reg);
}
-static inline void pg_writel(unsigned long value, unsigned long offset)
+static inline void pg_writel(u32 val, u32 bank, u32 reg)
{
- writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+ writel(val, regs[bank] + reg);
}
static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config)
@@ -217,10 +220,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(pingroups[pg].mux_reg);
+ reg = pg_readl(pingroups[pg].mux_bank, pingroups[pg].mux_reg);
reg &= ~(0x3 << pingroups[pg].mux_bit);
reg |= mux << pingroups[pg].mux_bit;
- pg_writel(reg, pingroups[pg].mux_reg);
+ pg_writel(reg, pingroups[pg].mux_bank, pingroups[pg].mux_reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -241,11 +244,11 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(pingroups[pg].tri_reg);
+ reg = pg_readl(pingroups[pg].tri_bank, pingroups[pg].tri_reg);
reg &= ~(0x1 << pingroups[pg].tri_bit);
if (tristate)
reg |= 1 << pingroups[pg].tri_bit;
- pg_writel(reg, pingroups[pg].tri_reg);
+ pg_writel(reg, pingroups[pg].tri_bank, pingroups[pg].tri_reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -272,10 +275,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(pingroups[pg].pupd_reg);
+ reg = pg_readl(pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
reg &= ~(0x3 << pingroups[pg].pupd_bit);
reg |= pupd << pingroups[pg].pupd_bit;
- pg_writel(reg, pingroups[pg].pupd_reg);
+ pg_writel(reg, pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -362,12 +365,12 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
if (hsm == TEGRA_HSM_ENABLE)
reg |= (1 << 2);
else
reg &= ~(1 << 2);
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -387,12 +390,12 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
if (schmitt == TEGRA_SCHMITT_ENABLE)
reg |= (1 << 3);
else
reg &= ~(1 << 3);
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -412,10 +415,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x3 << 4);
reg |= drive << 4;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -435,10 +438,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x1f << 12);
reg |= pull_down << 12;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -458,10 +461,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x1f << 12);
reg |= pull_up << 12;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -481,10 +484,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x3 << 28);
reg |= slew_rising << 28;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -504,10 +507,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x3 << 30);
reg |= slew_falling << 30;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -665,6 +668,99 @@
}
}
+static int __devinit tegra_pinmux_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int i;
+ int config_bad = 0;
+
+ for (i = 0; ; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res)
+ break;
+ }
+ nbanks = i;
+
+ for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+ if (pingroups[i].tri_bank >= nbanks) {
+ dev_err(&pdev->dev, "pingroup %d: bad tri_bank\n", i);
+ config_bad = 1;
+ }
+
+ if (pingroups[i].mux_bank >= nbanks) {
+ dev_err(&pdev->dev, "pingroup %d: bad mux_bank\n", i);
+ config_bad = 1;
+ }
+
+ if (pingroups[i].pupd_bank >= nbanks) {
+ dev_err(&pdev->dev, "pingroup %d: bad pupd_bank\n", i);
+ config_bad = 1;
+ }
+ }
+
+ for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) {
+ if (drive_pingroups[i].reg_bank >= nbanks) {
+ dev_err(&pdev->dev,
+ "drive pingroup %d: bad reg_bank\n", i);
+ config_bad = 1;
+ }
+ }
+
+ if (config_bad)
+ return -ENODEV;
+
+ regs = devm_kzalloc(&pdev->dev, nbanks * sizeof(*regs), GFP_KERNEL);
+ if (!regs) {
+ dev_err(&pdev->dev, "Can't alloc regs pointer\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < nbanks; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing MEM resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res),
+ dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev,
+ "Couldn't request MEM resource %d\n", i);
+ return -ENODEV;
+ }
+
+ regs[i] = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!regs) {
+ dev_err(&pdev->dev, "Couldn't ioremap regs %d\n", i);
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-pinmux", },
+ { },
+};
+
+static struct platform_driver tegra_pinmux_driver = {
+ .driver = {
+ .name = "tegra-pinmux",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_pinmux_of_match,
+ },
+ .probe = tegra_pinmux_probe,
+};
+
+static int __init tegra_pinmux_init(void)
+{
+ return platform_driver_register(&tegra_pinmux_driver);
+}
+postcore_initcall(tegra_pinmux_init);
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
@@ -684,6 +780,7 @@
int len;
for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+ unsigned long reg;
unsigned long tri;
unsigned long mux;
unsigned long pupd;
@@ -696,8 +793,9 @@
seq_printf(s, "TEGRA_MUX_NONE");
len = strlen("NONE");
} else {
- mux = (pg_readl(pingroups[i].mux_reg) >>
- pingroups[i].mux_bit) & 0x3;
+ reg = pg_readl(pingroups[i].mux_bank,
+ pingroups[i].mux_reg);
+ mux = (reg >> pingroups[i].mux_bit) & 0x3;
if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) {
seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1);
len = 5;
@@ -713,8 +811,9 @@
seq_printf(s, "TEGRA_PUPD_NORMAL");
len = strlen("NORMAL");
} else {
- pupd = (pg_readl(pingroups[i].pupd_reg) >>
- pingroups[i].pupd_bit) & 0x3;
+ reg = pg_readl(pingroups[i].pupd_bank,
+ pingroups[i].pupd_reg);
+ pupd = (reg >> pingroups[i].pupd_bit) & 0x3;
seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd));
len = strlen(pupd_name(pupd));
}
@@ -723,8 +822,9 @@
if (pingroups[i].tri_reg < 0) {
seq_printf(s, "TEGRA_TRI_NORMAL");
} else {
- tri = (pg_readl(pingroups[i].tri_reg) >>
- pingroups[i].tri_bit) & 0x1;
+ reg = pg_readl(pingroups[i].tri_bank,
+ pingroups[i].tri_reg);
+ tri = (reg >> pingroups[i].tri_bit) & 0x1;
seq_printf(s, "TEGRA_TRI_%s", tri_name(tri));
}
@@ -759,7 +859,8 @@
dbg_pad_field(s, 7 - len);
- reg = pg_readl(drive_pingroups[i].reg);
+ reg = pg_readl(drive_pingroups[i].reg_bank,
+ drive_pingroups[i].reg);
if (HSM_EN(reg)) {
seq_printf(s, "TEGRA_HSM_ENABLE");
len = 16;
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 3cee9aa..9483064 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -89,12 +89,11 @@
return tegra_powergate_set(id, false);
}
-bool tegra_powergate_is_powered(int id)
+static bool tegra_powergate_is_powered(int id)
{
u32 status;
- if (id < 0 || id >= TEGRA_NUM_POWERGATE)
- return -EINVAL;
+ WARN_ON(id < 0 || id >= TEGRA_NUM_POWERGATE);
status = pmc_read(PWRGATE_STATUS) & (1 << id);
return !!status;
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 0fe9b3e..371869d 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -166,13 +166,13 @@
static int tegra_periph_clk_enable_refcount[3 * 32];
#define clk_writel(value, reg) \
- __raw_writel(value, (u32)reg_clk_base + (reg))
+ __raw_writel(value, reg_clk_base + (reg))
#define clk_readl(reg) \
- __raw_readl((u32)reg_clk_base + (reg))
+ __raw_readl(reg_clk_base + (reg))
#define pmc_writel(value, reg) \
- __raw_writel(value, (u32)reg_pmc_base + (reg))
+ __raw_writel(value, reg_pmc_base + (reg))
#define pmc_readl(reg) \
- __raw_readl((u32)reg_pmc_base + (reg))
+ __raw_readl(reg_pmc_base + (reg))
unsigned long clk_measure_input_freq(void)
{
@@ -918,7 +918,7 @@
static void tegra2_periph_clk_init(struct clk *c)
{
u32 val = clk_readl(c->reg);
- const struct clk_mux_sel *mux = 0;
+ const struct clk_mux_sel *mux = NULL;
const struct clk_mux_sel *sel;
if (c->flags & MUX) {
for (sel = c->inputs; sel->input != NULL; sel++) {
@@ -1459,7 +1459,7 @@
static struct clk_mux_sel tegra_clk_m_sel[] = {
{ .input = &tegra_clk_32k, .value = 0},
{ .input = &tegra_pll_s, .value = 1},
- { 0, 0},
+ { NULL , 0},
};
static struct clk tegra_clk_m = {
@@ -1861,7 +1861,7 @@
{ .name = "ext_audio_clk1", .value = 6 },
{ .name = "ext_vimclk", .value = 7 },
#endif
- { 0, 0 }
+ { NULL, 0 }
};
static struct clk tegra_clk_audio = {
@@ -1885,7 +1885,7 @@
},
};
-struct clk_lookup tegra_audio_clk_lookups[] = {
+static struct clk_lookup tegra_audio_clk_lookups[] = {
{ .con_id = "audio", .clk = &tegra_clk_audio },
{ .con_id = "audio_2x", .clk = &tegra_clk_audio_2x }
};
@@ -1926,7 +1926,7 @@
{ .input = &tegra_pll_p_out3, .value = 6},
{ .input = &tegra_clk_d, .value = 7},
{ .input = &tegra_pll_x, .value = 8},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_sclk[] = {
@@ -1938,7 +1938,7 @@
{ .input = &tegra_clk_d, .value = 5},
{ .input = &tegra_clk_32k, .value = 6},
{ .input = &tegra_pll_m_out1, .value = 7},
- { 0, 0},
+ { NULL, 0},
};
static struct clk tegra_clk_cclk = {
@@ -2009,7 +2009,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_p, .value = 2},
{ .input = &tegra_pll_a_out0, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
@@ -2017,7 +2017,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_p, .value = 2},
{ .input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
@@ -2025,7 +2025,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_m, .value = 2},
{ .input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = {
@@ -2033,7 +2033,7 @@
{.input = &tegra_clk_audio_2x, .value = 1},
{.input = &tegra_pll_p, .value = 2},
{.input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
@@ -2041,7 +2041,7 @@
{.input = &tegra_pll_d_out0, .value = 1},
{.input = &tegra_pll_c, .value = 2},
{.input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
@@ -2050,39 +2050,39 @@
{.input = &tegra_clk_audio, .value = 2},
{.input = &tegra_clk_m, .value = 3},
{.input = &tegra_clk_32k, .value = 4},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
{.input = &tegra_pll_p, .value = 0},
{.input = &tegra_pll_c, .value = 1},
{.input = &tegra_pll_m, .value = 2},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_clk_m[] = {
{ .input = &tegra_clk_m, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_out3[] = {
{ .input = &tegra_pll_p_out3, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_plld[] = {
{ .input = &tegra_pll_d, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_clk_32k[] = {
{ .input = &tegra_clk_32k, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pclk[] = {
{ .input = &tegra_clk_pclk, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk tegra_clk_emc = {
@@ -2125,7 +2125,7 @@
.parent = _parent, \
}
-struct clk tegra_list_clks[] = {
+static struct clk tegra_list_clks[] = {
PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0),
PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET),
PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
@@ -2221,7 +2221,7 @@
* configuration. List those here to register them twice in the clock lookup
* table under two names.
*/
-struct clk_duplicate tegra_clk_duplicates[] = {
+static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("uarta", "tegra_uart.0", NULL),
CLK_DUPLICATE("uartb", "tegra_uart.1", NULL),
CLK_DUPLICATE("uartc", "tegra_uart.2", NULL),
@@ -2252,7 +2252,7 @@
.clk = ck, \
}
-struct clk *tegra_ptr_clks[] = {
+static struct clk *tegra_ptr_clks[] = {
&tegra_clk_32k,
&tegra_pll_s,
&tegra_clk_m,
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 9035042..e2272d2 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -62,9 +62,9 @@
static u64 persistent_ms, last_persistent_ms;
#define timer_writel(value, reg) \
- __raw_writel(value, (u32)timer_reg_base + (reg))
+ __raw_writel(value, timer_reg_base + (reg))
#define timer_readl(reg) \
- __raw_readl((u32)timer_reg_base + (reg))
+ __raw_readl(timer_reg_base + (reg))
static int tegra_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
@@ -133,7 +133,7 @@
* tegra_rtc driver could be executing to avoid race conditions
* on the RTC shadow register
*/
-u64 tegra_rtc_read_ms(void)
+static u64 tegra_rtc_read_ms(void)
{
u32 ms = readl(rtc_base + RTC_MILLISECONDS);
u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index 88081bb..37576a7 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -28,6 +28,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
+#include <mach/gpio-tegra.h>
#include <mach/usb_phy.h>
#include <mach/iomap.h>
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 449fd6a..1cbcd4f 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -8,6 +8,7 @@
bool "U300"
select PINCTRL
select PINMUX_U300
+ select GPIO_U300
comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
@@ -50,39 +51,12 @@
endchoice
-choice
- prompt "Memory configuration"
- default MACH_U300_SINGLE_RAM
- ---help---
- You have to config the kernel according to the physical memory
- configuration.
-
-config MACH_U300_SINGLE_RAM
- bool "Single RAM"
- help
- Select this if you want support for Single RAM phones.
-
-config MACH_U300_DUAL_RAM
- bool "Dual RAM"
- help
- Select this if you want support for Dual RAM phones.
- This is two RAM memories on different EMIFs.
-endchoice
-
config U300_DEBUG
bool "Debug support for U300"
depends on PM
help
Debug support for U300 in sysfs, procfs etc.
-config MACH_U300_SEMI_IS_SHARED
- bool "The SEMI is used by both the access and application side"
- depends on MACH_U300
- help
- This makes it possible to use the SEMI (Shared External
- Memory Interface) from both from access and application
- side.
-
config MACH_U300_SPIDUMMY
bool "SSP/SPI dummy chip"
select SPI
@@ -95,25 +69,6 @@
you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support.
-comment "All the settings below must match the bootloader's settings"
-
-config MACH_U300_ACCESS_MEM_SIZE
- int "Access CPU memory allocation"
- range 7 25
- depends on MACH_U300_SINGLE_RAM
- default 13
- help
- How much memory in MiB that the Access side CPU has allocated
-
-config MACH_U300_2MB_ALIGNMENT_FIX
- bool "2MiB alignment fix"
- depends on MACH_U300_SINGLE_RAM
- default y
- help
- If yes and the Access side CPU has allocated an odd size in
- MiB, this fix gives you one MiB extra that would otherwise be
- lost due to Linux 2 MiB alignment policy.
-
endmenu
endif
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
index 69357af..87811de 100644
--- a/arch/arm/mach-u300/Makefile.boot
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -1,15 +1,4 @@
-# Note: the following conditions must always be true:
-# ZRELADDR == virt_to_phys(TEXTADDR)
-# PARAMS_PHYS must be within 4MB of ZRELADDR
-# INITRD_PHYS must be in RAM
-
-ifdef CONFIG_MACH_U300_SINGLE_RAM
- zreladdr-y += 0x28E08000
- params_phys-y := 0x28E00100
-else
- zreladdr-y += 0x48008000
- params_phys-y := 0x48000100
-endif
-
+ zreladdr-y += 0x48008000
+params_phys-y := 0x48000100
# This isn't used.
-#initrd_phys-y := 0x29800000
+#initrd_phys-y := 0x48800000
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 2f5929b..ac0791e 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -27,6 +27,7 @@
#include <linux/mtd/fsmc.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinmux.h>
+#include <linux/dma-mapping.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -39,6 +40,7 @@
#include <mach/hardware.h>
#include <mach/syscon.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "clock.h"
#include "mmc.h"
@@ -70,30 +72,13 @@
.length = SZ_32K,
.type = MT_DEVICE,
},
- {
- .virtual = 0xffff2000, /* TCM memory */
- .pfn = __phys_to_pfn(0xffff2000),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-
- /*
- * This overlaps with the IRQ vectors etc at 0xffff0000, so these
- * may have to be moved to 0x00000000 in order to use the ROM.
- */
- /*
- {
- .virtual = U300_BOOTROM_VIRT_BASE,
- .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
- .length = SZ_64K,
- .type = MT_ROM,
- },
- */
};
void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+ /* We enable a real big DMA buffer if need be. */
+ init_consistent_dma_size(SZ_4M);
}
/*
@@ -241,7 +226,7 @@
.end = IRQ_U300_GPIO_PORT2,
.flags = IORESOURCE_IRQ,
},
-#ifdef U300_COH901571_3
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
{
.name = "gpio3",
.start = IRQ_U300_GPIO_PORT3,
@@ -254,6 +239,7 @@
.end = IRQ_U300_GPIO_PORT4,
.flags = IORESOURCE_IRQ,
},
+#endif
#ifdef CONFIG_MACH_U300_BS335
{
.name = "gpio5",
@@ -268,7 +254,6 @@
.flags = IORESOURCE_IRQ,
},
#endif /* CONFIG_MACH_U300_BS335 */
-#endif /* U300_COH901571_3 */
};
static struct resource keypad_resources[] = {
@@ -363,51 +348,6 @@
}
};
-/* TODO: These should be protected by suitable #ifdef's */
-static struct resource ave_resources[] = {
- {
- .name = "AVE3e I/O Area",
- .start = U300_VIDEOENC_BASE,
- .end = U300_VIDEOENC_BASE + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e IRQ0",
- .start = IRQ_U300_VIDEO_ENC_0,
- .end = IRQ_U300_VIDEO_ENC_0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e IRQ1",
- .start = IRQ_U300_VIDEO_ENC_1,
- .end = IRQ_U300_VIDEO_ENC_1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e Physmem Area",
- .start = 0, /* 0 will be remapped to reserved memory */
- .end = SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- /*
- * The AVE3e requires two regions of 256MB that it considers
- * "invisible". The hardware will not be able to access these
- * addresses, so they should never point to system RAM.
- */
- {
- .name = "AVE3e Reserved 0",
- .start = 0xd0000000,
- .end = 0xd0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e Reserved 1",
- .start = 0xe0000000,
- .end = 0xe0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
static struct resource dma_resource[] = {
{
.start = U300_DMAC_BASE,
@@ -1566,11 +1506,35 @@
.resource = i2c1_resources,
};
+/*
+ * The different variants have a few different versions of the
+ * GPIO block, with different number of ports.
+ */
+static struct u300_gpio_platform u300_gpio_plat = {
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+ .variant = U300_GPIO_COH901335,
+ .ports = 3,
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+ .variant = U300_GPIO_COH901571_3_BS335,
+ .ports = 7,
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+ .variant = U300_GPIO_COH901571_3_BS365,
+ .ports = 5,
+#endif
+ .gpio_base = 0,
+ .gpio_irq_base = IRQ_U300_GPIO_BASE,
+};
+
static struct platform_device gpio_device = {
.name = "u300-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(gpio_resources),
.resource = gpio_resources,
+ .dev = {
+ .platform_data = &u300_gpio_plat,
+ },
};
static struct platform_device keypad_device = {
@@ -1622,13 +1586,6 @@
},
};
-static struct platform_device ave_device = {
- .name = "video_enc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ave_resources),
- .resource = ave_resources,
-};
-
static struct platform_device dma_device = {
.name = "coh901318",
.id = -1,
@@ -1719,7 +1676,6 @@
&gpio_device,
&nand_device,
&wdog_device,
- &ave_device,
&pinmux_device,
};
@@ -1742,7 +1698,7 @@
BUG_ON(IS_ERR(clk));
clk_enable(clk);
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
@@ -1917,17 +1873,10 @@
/* Register subdevices on the SPI bus */
u300_spi_register_board_devices();
-#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
- /*
- * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
- * both subsystems are requesting this mode.
- * If we not share the Acc SDRAM, this is never the case. Therefore
- * enable it here from the App side.
- */
+ /* Enable SEMI self refresh */
val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
-#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
}
static int core_module_init(void)
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index f0394ba..5140dee 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -256,57 +256,8 @@
};
#endif
-#ifdef CONFIG_AB3550_CORE
-static struct abx500_init_settings ab3550_init_settings[] = {
- {
- .bank = 0,
- .reg = AB3550_IMR1,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR2,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR3,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR4,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR5,
- /* The two most significant bits are not used */
- .setting = 0x3f
- },
-};
-
-static struct ab3550_platform_data ab3550_plf_data = {
- .irq = {
- .base = IRQ_AB3550_BASE,
- .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
- },
- .dev_data = {
- },
- .init_settings = ab3550_init_settings,
- .init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
-};
-#endif
-
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
-#if defined(CONFIG_AB3550_CORE)
- {
- .type = "ab3550",
- .addr = 0x4A,
- .irq = IRQ_U300_IRQ0_EXT,
- .platform_data = &ab3550_plf_data,
- },
-#elif defined(CONFIG_AB3100_CORE)
+#ifdef CONFIG_AB3100_CORE
{
.type = "ab3100",
.addr = 0x48,
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index df71570..8ae8e4a 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* If we move the address using MMU, use this. */
ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
new file mode 100644
index 0000000..0c2b202
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_U300_H
+#define __MACH_U300_GPIO_U300_H
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
+#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP 4
+#define U300_GPIO_PIN_CAM_REG_EN 5
+#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
+#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+ defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_UART_CTS 2
+#define U300_GPIO_PIN_UART_RTS 3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
+#endif
+
+#endif
+
+/**
+ * enum u300_gpio_variant - the type of U300 GPIO employed
+ */
+enum u300_gpio_variant {
+ U300_GPIO_COH901335,
+ U300_GPIO_COH901571_3_BS335,
+ U300_GPIO_COH901571_3_BS365,
+};
+
+/**
+ * struct u300_gpio_platform - U300 GPIO platform data
+ * @variant: IP block variant
+ * @ports: number of GPIO block ports
+ * @gpio_base: first GPIO number for this block (use a free range)
+ * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ */
+struct u300_gpio_platform {
+ enum u300_gpio_variant variant;
+ u8 ports;
+ int gpio_base;
+ int gpio_irq_base;
+};
+
+#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index d5a71ab..40a8c178 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -1,294 +1 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/gpio.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_H
-#define __MACH_U300_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-/* Switch type depending on platform/chip variant */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_COH901335
-#endif
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-#define U300_COH901571_3
-#endif
-
-/* Get base address for regs here */
-#include "u300-regs.h"
-/* IRQ numbers */
-#include "irqs.h"
-
-/*
- * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
- * used for anything, and often is. The event/enable etc figures are for
- * the lowermost pin (pin 0 on each port), shift this left to match your
- * pin if you're gonna use these values.
- */
-#ifdef U300_COH901335
-#define U300_GPIO_PORTX_SPACING (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_GPIO_PXPDIR (0x00)
-#define U300_GPIO_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x04)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x08)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x0C)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x10)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x14)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x18)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_GPIO_CR (0x54)
-#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-/* three ports of 8 bits each = GPIO pins 0..23 */
-#define U300_GPIO_NUM_PORTS 3
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-#ifdef U300_COH901571_3
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_GPIO_CR (0x00)
-#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-#define U300_GPIO_PORTX_SPACING (0x30)
-/* Port X Pin Data INPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDIR (0x04)
-/* Port X Pin Data OUTPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDOR (0x08)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x0C)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x10)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x14)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x18)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x1C)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x20)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-#ifdef CONFIG_MACH_U300_BS335
-/* seven ports of 8 bits each = GPIO pins 0..55 */
-#define U300_GPIO_NUM_PORTS 7
-#else
-/* five ports of 8 bits each = GPIO pins 0..39 */
-#define U300_GPIO_NUM_PORTS 5
-#endif
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
-/* translates a pin number to a port number */
-#define PIN_TO_PORT(val) (val >> 3)
-
-/* These can be found in arch/arm/mach-u300/gpio.c */
-extern int gpio_is_valid(int number);
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-extern int gpio_register_callback(unsigned gpio,
- int (*func)(void *arg),
- void *);
-extern int gpio_unregister_callback(unsigned gpio);
-extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
-extern void disable_irq_on_gpio_pin(unsigned gpio);
-extern void gpio_pullup(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_get_value_cansleep gpio_get_value
-#define gpio_set_value_cansleep gpio_set_value
-
-/* wrappers to sleep-enable the previous two functions */
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- /*
- * FIXME: This is no 1-1 mapping at all, it points to the
- * whole block of 8 pins.
- */
- return (irq - IRQ_U300_GPIO_PORT0) << 3;
-}
-
-#endif
+/* empty */
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index 09b1b28f..db3fbfa 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -72,7 +72,7 @@
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_NR_IRQS 45
+#define U300_VIC_IRQS_END 45
#endif
/* The DB3350-specific interrupt lines */
@@ -88,7 +88,7 @@
#define IRQ_U300_GPIO_PORT4 53
#define IRQ_U300_GPIO_PORT5 54
#define IRQ_U300_GPIO_PORT6 55
-#define U300_NR_IRQS 56
+#define U300_VIC_IRQS_END 56
#endif
/* The DB3210-specific interrupt lines */
@@ -106,16 +106,17 @@
#define IRQ_U300_NFIF 45
#define IRQ_U300_NFIF2 46
#define IRQ_U300_SYSCON_PLL_LOCK 47
-#define U300_NR_IRQS 48
+#define U300_VIC_IRQS_END 48
#endif
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (U300_NR_IRQS)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
-
-#define NR_IRQS (IRQ_AB3550_END + 1)
+/* Maximum 8*7 GPIO lines */
+#ifdef CONFIG_GPIO_U300
+#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
+#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
#else
-#define NR_IRQS U300_NR_IRQS
+#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
+#define NR_IRQS (IRQ_U300_GPIO_END)
+
#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e3..c808f34 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -13,30 +13,7 @@
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
-#ifdef CONFIG_MACH_U300_DUAL_RAM
-
-#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
-
-#else
-
-#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#else
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
-#endif
-
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
+#define PLAT_PHYS_OFFSET UL(0x48000000)
+#define BOOT_PARAMS_OFFSET 0x100
#endif
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index d5e4a98..4d482aa 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -13,12 +13,12 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <linux/dmaengine.h>
#include <linux/amba/mmci.h>
#include <linux/slab.h>
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "mmc.h"
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f..89422ee 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -23,21 +23,6 @@
#include <asm/mach/arch.h>
#include <asm/memory.h>
-static void __init u300_reserve(void)
-{
- /*
- * U300 - This platform family can share physical memory
- * between two ARM cpus, one running Linux and the other
- * running another OS.
- */
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
- CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
- memblock_reserve(PHYS_OFFSET, 0x00100000);
-#endif
-#endif
-}
-
static void __init u300_init_machine(void)
{
u300_init_devices();
@@ -61,9 +46,8 @@
MACHINE_START(U300, MACH_U300_STRING)
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .boot_params = BOOT_PARAMS_OFFSET,
+ .atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
- .reserve = u300_reserve,
.init_irq = u300_init_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 1694916..6bd2f45 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -3,7 +3,8 @@
#
obj-y := clock.o cpu.o devices.o devices-common.o \
- id.o usb.o
+ id.o usb.o timer.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f26fd76..74bfcff 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -6,10 +6,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include "pins-db8500.h"
@@ -153,7 +153,7 @@
GPIO7_U1_RTSn | PIN_OUTPUT_HIGH,
};
-static pin_cfg_t mop500_pins_hrefv60[] = {
+static pin_cfg_t hrefv60_pins[] = {
/* WLAN */
GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */
GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */
@@ -279,14 +279,26 @@
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins_common,
- ARRAY_SIZE(mop500_pins_common));
- if (machine_is_hrefv60())
- nmk_config_pins(mop500_pins_hrefv60,
- ARRAY_SIZE(mop500_pins_hrefv60));
- else if (machine_is_snowball())
- nmk_config_pins(snowball_pins,
- ARRAY_SIZE(snowball_pins));
- else
- nmk_config_pins(mop500_pins_default,
- ARRAY_SIZE(mop500_pins_default));
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(mop500_pins_default,
+ ARRAY_SIZE(mop500_pins_default));
+}
+
+void __init snowball_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(snowball_pins,
+ ARRAY_SIZE(snowball_pins));
+}
+
+void __init hrefv60_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(hrefv60_pins,
+ ARRAY_SIZE(hrefv60_pins));
}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index d0cb9e5..6826fae 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -216,30 +216,48 @@
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
- if (!machine_is_snowball())
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
- if (machine_is_hrefv60() || machine_is_snowball()) {
- if (machine_is_hrefv60()) {
- mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
- sdi0_en = HREFV60_SDMMC_EN_GPIO;
- sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
- } else if (machine_is_snowball()) {
- mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
- mop500_sdi0_data.cd_invert = true;
- sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
- sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
- }
- sdi0_configure();
- }
-
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
* mop500_sdi_tc35892_init() above.
*/
}
+
+void __init snowball_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+ mop500_sdi0_data.cd_invert = true;
+ sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+ sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
+
+void __init hrefv60_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
index 8ce46c0..feb5744 100644
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -4,7 +4,7 @@
* Board data for the U8500 UIB, also known as the New UIB
* License terms: GNU General Public License (GPL), version 2
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
@@ -13,7 +13,6 @@
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include "board-mop500.h"
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index cd54aba..bdd7b80 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -37,6 +37,7 @@
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -603,28 +604,14 @@
{
int i2c0_devs;
- /*
- * The HREFv60 board removed a GPIO expander and routed
- * all these GPIO pins to the internal GPIO controller
- * instead.
- */
- if (!machine_is_snowball()) {
- if (machine_is_hrefv60())
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- else
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
- }
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
u8500_init_devices();
mop500_pins_init();
- if (machine_is_snowball())
- platform_add_devices(snowball_platform_devs,
- ARRAY_SIZE(snowball_platform_devs));
- else
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
@@ -632,8 +619,66 @@
mop500_uart_init();
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- if (machine_is_hrefv60())
- i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init snowball_init_machine(void)
+{
+ int i2c0_devs;
+
+ u8500_init_devices();
+
+ snowball_pins_init();
+
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+
+ mop500_i2c_init();
+ snowball_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init hrefv60_init_machine(void)
+{
+ int i2c0_devs;
+
+ /*
+ * The HREFv60 board removed a GPIO expander and routed
+ * all these GPIO pins to the internal GPIO controller
+ * instead.
+ */
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+
+ u8500_init_devices();
+
+ hrefv60_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_i2c_init();
+ mop500_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
@@ -645,7 +690,7 @@
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
@@ -654,18 +699,18 @@
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
- .init_machine = mop500_init_machine,
+ .init_machine = hrefv60_init_machine,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
- .init_machine = mop500_init_machine,
+ .init_machine = snowball_init_machine,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index ee77a89..de18a2a 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -40,10 +40,13 @@
struct i2c_board_info;
extern void mop500_sdi_init(void);
+extern void snowball_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pins_init(void);
+void __init hrefv60_pins_init(void);
+void __init snowball_pins_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 739fb4c..63c3f80 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -7,9 +7,9 @@
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/db5500-regs.h>
#include <plat/ste_dma40.h>
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index e58f0f5..82025ba 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -8,15 +8,16 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/i2c.h>
+#include <linux/mfd/ab5500/ab5500.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
#include <plat/i2c.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
@@ -87,7 +88,6 @@
.brt_val = 0x7F, /* Max brightness */
};
-
static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
{
/* Backlight */
@@ -101,6 +101,30 @@
db5500_add_i2c2(&u5500_i2c2_data);
i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
}
+
+static struct ab5500_platform_data ab5500_plf_data = {
+ .irq = {
+ .base = 0,
+ .count = 0,
+ },
+ .init_settings = NULL,
+ .init_settings_sz = 0,
+ .pm_power_off = false,
+};
+
+static struct platform_device ab5500_device = {
+ .name = "ab5500-core",
+ .id = 0,
+ .dev = {
+ .platform_data = &ab5500_plf_data,
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device *u5500_platform_devices[] __initdata = {
+ &ab5500_device,
+};
+
static void __init u5500_uart_init(void)
{
db5500_add_uart0(NULL);
@@ -115,10 +139,13 @@
u5500_i2c_init();
u5500_sdi_init();
u5500_uart_init();
+
+ platform_add_devices(u5500_platform_devices,
+ ARRAY_SIZE(u5500_platform_devices));
}
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
new file mode 100644
index 0000000..122ddde
--- /dev/null
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/hardware.h>
+#include <mach/id.h>
+
+static void __iomem *l2x0_base;
+
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* wait for the operation to complete */
+ while (readl_relaxed(reg) & mask)
+ cpu_relax();
+}
+
+static inline void ux500_cache_sync(void)
+{
+ writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
+ ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+ uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
+
+ /* invalidate all ways */
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ ux500_cache_sync();
+}
+
+static int __init ux500_l2x0_unlock(void)
+{
+ int i;
+
+ /*
+ * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+ * apparently locks both caches before jumping to the kernel. The
+ * l2x0 core will not touch the unlock registers if the l2x0 is
+ * already enabled, so we do it right here instead. The PL310 has
+ * 8 sets of registers, one per possible CPU.
+ */
+ for (i = 0; i < 8; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+ return 0;
+}
+
+static int __init ux500_l2x0_init(void)
+{
+ if (cpu_is_u5500())
+ l2x0_base = __io_address(U5500_L2CC_BASE);
+ else if (cpu_is_u8500())
+ l2x0_base = __io_address(U8500_L2CC_BASE);
+ else
+ ux500_unknown_soc();
+
+ /* Unlock before init */
+ ux500_l2x0_unlock();
+
+ /* 64KB way size, 8 way associativity, force WA */
+ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+ /* Override invalidate function */
+ outer_cache.disable = ux500_l2x0_disable;
+ outer_cache.inv_all = ux500_l2x0_inv_all;
+
+ return 0;
+}
+
+early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 22705d2..9de1af0 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -13,7 +13,7 @@
#include <asm/mach/map.h>
#include <asm/pmu.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4598b06..13e8890 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -14,12 +14,12 @@
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1da23bb..f418574 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,14 +10,12 @@
#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/db5500-prcmu.h>
+#include <linux/clksrc-dbx500-prcmu.h>
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/localtimer.h>
-#include <plat/mtu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
@@ -26,10 +24,6 @@
void __iomem *_PRCMU_BASE;
-#ifdef CONFIG_CACHE_L2X0
-static void __iomem *l2x0_base;
-#endif
-
void __init ux500_init_irq(void)
{
void __iomem *dist_base;
@@ -53,96 +47,6 @@
if (cpu_is_u5500())
db5500_prcmu_early_init();
if (cpu_is_u8500())
- prcmu_early_init();
+ db8500_prcmu_early_init();
clk_init();
}
-
-#ifdef CONFIG_CACHE_L2X0
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
- /* wait for the operation to complete */
- while (readl_relaxed(reg) & mask)
- ;
-}
-
-static inline void ux500_cache_sync(void)
-{
- void __iomem *base = l2x0_base;
-
- writel_relaxed(0, base + L2X0_CACHE_SYNC);
- ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
- void __iomem *base = l2x0_base;
- uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
-
- /* invalidate all ways */
- writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
- ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
- ux500_cache_sync();
-}
-
-static int ux500_l2x0_init(void)
-{
- if (cpu_is_u5500())
- l2x0_base = __io_address(U5500_L2CC_BASE);
- else if (cpu_is_u8500())
- l2x0_base = __io_address(U8500_L2CC_BASE);
- else
- ux500_unknown_soc();
-
- /* 64KB way size, 8 way associativity, force WA */
- l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
-
- /* Override invalidate function */
- outer_cache.disable = ux500_l2x0_disable;
- outer_cache.inv_all = ux500_l2x0_inv_all;
-
- return 0;
-}
-early_initcall(ux500_l2x0_init);
-#endif
-
-static void __init ux500_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
- /* Setup the local timer base */
- if (cpu_is_u5500())
- twd_base = __io_address(U5500_TWD_BASE);
- else if (cpu_is_u8500())
- twd_base = __io_address(U8500_TWD_BASE);
- else
- ux500_unknown_soc();
-#endif
- if (cpu_is_u5500())
- mtu_base = __io_address(U5500_MTU0_BASE);
- else if (cpu_is_u8500ed())
- mtu_base = __io_address(U8500_MTU0_BASE_ED);
- else if (cpu_is_u8500())
- mtu_base = __io_address(U8500_MTU0_BASE);
- else
- ux500_unknown_soc();
-
- nmdk_timer_init();
-}
-
-struct sys_timer ux500_timer = {
- .init = ux500_timer_init,
-};
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 13a4ce0..c563e54 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index dd8037e..572015e 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -24,7 +24,7 @@
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 6ad9832..994b5fe 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -61,6 +61,8 @@
#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000)
#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000)
#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000)
+#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
+#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 0499971..751b0e6 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -102,10 +102,13 @@
#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
+#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
+
/* per3 base addresses */
#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 700fb05..8d74d92 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -35,7 +35,7 @@
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_BASE @ no, physical address
ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.endm
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 3c4cd31..7389df9 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -7,6 +7,4 @@
*/
#define ARCH_NR_GPIOS 350
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
deleted file mode 100644
index 2ef697a..0000000
--- a/arch/arm/mach-ux500/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#define BUS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 7dd0807..6fb3c4b 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -51,15 +51,9 @@
static inline void arch_decomp_setup(void)
{
/* Check in run time if we run on an U8500 or U5500 */
- if (machine_is_u8500() ||
- machine_is_svp8500v1() ||
- machine_is_svp8500v2() ||
- machine_is_hrefv60() ||
- machine_is_snowball())
- ux500_uart_base = U8500_UART2_BASE;
- else if (machine_is_u5500())
+ if (machine_is_u5500())
ux500_uart_base = U5500_UART0_BASE;
- else /* not much can be done to help here */
+ else
ux500_uart_base = U8500_UART2_BASE;
}
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index f923764..8b1d1a7 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -35,40 +35,40 @@
#define GPIO4_GPIO PIN_CFG(4, GPIO)
#define GPIO4_U1_RXD PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP)
#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C)
#define GPIO5_GPIO PIN_CFG(5, GPIO)
#define GPIO5_U1_TXD PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP)
#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C)
#define GPIO6_GPIO PIN_CFG(6, GPIO)
#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP)
#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C)
#define GPIO7_GPIO PIN_CFG(7, GPIO)
#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP)
#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C)
#define GPIO8_GPIO PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP)
-#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP)
+#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP)
+#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP)
#define GPIO9_GPIO PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP)
-#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP)
+#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP)
+#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP)
#define GPIO10_GPIO PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP)
-#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP)
+#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP)
#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C)
#define GPIO11_GPIO PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP)
-#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP)
+#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP)
#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C)
#define GPIO12_GPIO PIN_CFG(12, GPIO)
@@ -87,66 +87,66 @@
#define GPIO16_GPIO PIN_CFG(16, GPIO)
#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP)
#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C)
#define GPIO17_GPIO PIN_CFG(17, GPIO)
#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP)
#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C)
#define GPIO18_GPIO PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP)
+#define GPIO18_MC0_CMDDIR PIN_CFG_INPUT(18, ALT_A, PULLUP)
#define GPIO18_U2_RXD PIN_CFG(18, ALT_B)
#define GPIO18_MS_IEP PIN_CFG(18, ALT_C)
#define GPIO19_GPIO PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP)
+#define GPIO19_MC0_DAT0DIR PIN_CFG_INPUT(19, ALT_A, PULLUP)
#define GPIO19_U2_TXD PIN_CFG(19, ALT_B)
#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C)
#define GPIO20_GPIO PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP)
+#define GPIO20_MC0_DAT2DIR PIN_CFG_INPUT(20, ALT_A, PULLUP)
#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B)
#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C)
#define GPIO21_GPIO PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP)
+#define GPIO21_MC0_DAT31DIR PIN_CFG_INPUT(21, ALT_A, PULLUP)
#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B)
#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C)
#define GPIO22_GPIO PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP)
+#define GPIO22_MC0_FBCLK PIN_CFG_INPUT(22, ALT_A, PULLUP)
#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B)
#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C)
#define GPIO23_GPIO PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP)
+#define GPIO23_MC0_CLK PIN_CFG_INPUT(23, ALT_A, PULLUP)
#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B)
#define GPIO23_MS_CLK PIN_CFG(23, ALT_C)
#define GPIO24_GPIO PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP)
+#define GPIO24_MC0_CMD PIN_CFG_INPUT(24, ALT_A, PULLUP)
#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B)
#define GPIO24_MS_BS PIN_CFG(24, ALT_C)
#define GPIO25_GPIO PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP)
+#define GPIO25_MC0_DAT0 PIN_CFG_INPUT(25, ALT_A, PULLUP)
#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B)
#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C)
#define GPIO26_GPIO PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP)
+#define GPIO26_MC0_DAT1 PIN_CFG_INPUT(26, ALT_A, PULLUP)
#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B)
#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C)
#define GPIO27_GPIO PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP)
+#define GPIO27_MC0_DAT2 PIN_CFG_INPUT(27, ALT_A, PULLUP)
#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B)
#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C)
#define GPIO28_GPIO PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP)
+#define GPIO28_MC0_DAT3 PIN_CFG_INPUT(28, ALT_A, PULLUP)
#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B)
#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C)
@@ -357,48 +357,48 @@
#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C)
#define GPIO128_GPIO PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP)
+#define GPIO128_MC2_CLK PIN_CFG_INPUT(128, ALT_A, PULLUP)
#define GPIO128_SM_CKO PIN_CFG(128, ALT_B)
#define GPIO129_GPIO PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP)
+#define GPIO129_MC2_CMD PIN_CFG_INPUT(129, ALT_A, PULLUP)
#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B)
#define GPIO130_GPIO PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP)
+#define GPIO130_MC2_FBCLK PIN_CFG_INPUT(130, ALT_A, PULLUP)
#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B)
#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C)
#define GPIO131_GPIO PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP)
+#define GPIO131_MC2_DAT0 PIN_CFG_INPUT(131, ALT_A, PULLUP)
#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B)
#define GPIO132_GPIO PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP)
+#define GPIO132_MC2_DAT1 PIN_CFG_INPUT(132, ALT_A, PULLUP)
#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B)
#define GPIO133_GPIO PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP)
+#define GPIO133_MC2_DAT2 PIN_CFG_INPUT(133, ALT_A, PULLUP)
#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B)
#define GPIO134_GPIO PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP)
+#define GPIO134_MC2_DAT3 PIN_CFG_INPUT(134, ALT_A, PULLUP)
#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B)
#define GPIO135_GPIO PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP)
+#define GPIO135_MC2_DAT4 PIN_CFG_INPUT(135, ALT_A, PULLUP)
#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B)
#define GPIO136_GPIO PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP)
+#define GPIO136_MC2_DAT5 PIN_CFG_INPUT(136, ALT_A, PULLUP)
#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B)
#define GPIO137_GPIO PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP)
+#define GPIO137_MC2_DAT6 PIN_CFG_INPUT(137, ALT_A, PULLUP)
#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B)
#define GPIO138_GPIO PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP)
+#define GPIO138_MC2_DAT7 PIN_CFG_INPUT(138, ALT_A, PULLUP)
#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B)
#define GPIO139_GPIO PIN_CFG(139, GPIO)
@@ -434,10 +434,10 @@
#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A)
#define GPIO147_GPIO PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP)
+#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP)
#define GPIO148_GPIO PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP)
+#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP)
#define GPIO149_GPIO PIN_CFG(149, GPIO)
#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A)
@@ -459,82 +459,82 @@
#define GPIO152_KP_O9 PIN_CFG(152, ALT_C)
#define GPIO153_GPIO PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN)
+#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN)
#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B)
#define GPIO153_U2_RXD PIN_CFG(153, ALT_C)
#define GPIO154_GPIO PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN)
+#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN)
#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B)
#define GPIO154_U2_TXD PIN_CFG(154, ALT_C)
#define GPIO155_GPIO PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN)
+#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN)
#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B)
#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C)
#define GPIO156_GPIO PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN)
+#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN)
#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B)
#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C)
#define GPIO157_GPIO PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP)
+#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP)
#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B)
#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C)
#define GPIO158_GPIO PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP)
+#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP)
#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B)
#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C)
#define GPIO159_GPIO PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP)
+#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP)
#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B)
#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C)
#define GPIO160_GPIO PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP)
+#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP)
#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B)
#define GPIO160_NONE PIN_CFG(160, ALT_C)
#define GPIO161_GPIO PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN)
+#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN)
#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B)
#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C)
#define GPIO162_GPIO PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN)
+#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN)
#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B)
#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C)
#define GPIO163_GPIO PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN)
+#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN)
#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B)
#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C)
#define GPIO164_GPIO PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP)
+#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP)
#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B)
#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C)
#define GPIO165_GPIO PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP)
+#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP)
#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B)
#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C)
#define GPIO166_GPIO PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP)
+#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP)
#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B)
#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C)
#define GPIO167_GPIO PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP)
+#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP)
#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B)
#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C)
#define GPIO168_GPIO PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP)
+#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP)
#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B)
#define GPIO168_NONE PIN_CFG(168, ALT_C)
@@ -569,39 +569,39 @@
#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A)
#define GPIO197_GPIO PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP)
+#define GPIO197_MC4_DAT3 PIN_CFG_INPUT(197, ALT_A, PULLUP)
#define GPIO198_GPIO PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP)
+#define GPIO198_MC4_DAT2 PIN_CFG_INPUT(198, ALT_A, PULLUP)
#define GPIO199_GPIO PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP)
+#define GPIO199_MC4_DAT1 PIN_CFG_INPUT(199, ALT_A, PULLUP)
#define GPIO200_GPIO PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP)
+#define GPIO200_MC4_DAT0 PIN_CFG_INPUT(200, ALT_A, PULLUP)
#define GPIO201_GPIO PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP)
+#define GPIO201_MC4_CMD PIN_CFG_INPUT(201, ALT_A, PULLUP)
#define GPIO202_GPIO PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP)
+#define GPIO202_MC4_FBCLK PIN_CFG_INPUT(202, ALT_A, PULLUP)
#define GPIO202_PWL PIN_CFG(202, ALT_B)
#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C)
#define GPIO203_GPIO PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP)
+#define GPIO203_MC4_CLK PIN_CFG_INPUT(203, ALT_A, PULLUP)
#define GPIO204_GPIO PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP)
+#define GPIO204_MC4_DAT7 PIN_CFG_INPUT(204, ALT_A, PULLUP)
#define GPIO205_GPIO PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP)
+#define GPIO205_MC4_DAT6 PIN_CFG_INPUT(205, ALT_A, PULLUP)
#define GPIO206_GPIO PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP)
+#define GPIO206_MC4_DAT5 PIN_CFG_INPUT(206, ALT_A, PULLUP)
#define GPIO207_GPIO PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP)
+#define GPIO207_MC4_DAT4 PIN_CFG_INPUT(207, ALT_A, PULLUP)
#define GPIO208_GPIO PIN_CFG(208, GPIO)
#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A)
@@ -632,21 +632,25 @@
#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A)
#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B)
#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C)
+#define GPIO215_SPI2_TXD PIN_CFG(215, ALT_C)
#define GPIO216_GPIO PIN_CFG(216, GPIO)
#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A)
#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP)
+#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP)
+#define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C)
#define GPIO217_GPIO PIN_CFG(217, GPIO)
#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A)
#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B)
#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C)
+#define GPIO217_SPI2_CLK PIN_CFG(217, ALT_C)
#define GPIO218_GPIO PIN_CFG(218, GPIO)
#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A)
#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP)
+#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP)
+#define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C)
#define GPIO219_GPIO PIN_CFG(219, GPIO)
#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A)
@@ -694,12 +698,12 @@
#define GPIO229_GPIO PIN_CFG(229, GPIO)
#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A)
#define GPIO229_PWL PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP)
+#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP)
#define GPIO230_GPIO PIN_CFG(230, GPIO)
#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A)
#define GPIO230_PWL PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP)
+#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP)
#define GPIO256_GPIO PIN_CFG(256, GPIO)
#define GPIO256_USB_NXT PIN_CFG(256, ALT_A)
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index eb51991..a19e398 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -96,7 +96,7 @@
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*/
- write_pen_release(cpu);
+ write_pen_release(cpu_logical_map(cpu));
gic_raise_softirq(cpumask_of(cpu), 1);
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
new file mode 100644
index 0000000..aea467d
--- /dev/null
+++ b/arch/arm/mach-ux500/timer.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
+ */
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/clksrc-dbx500-prcmu.h>
+
+#include <asm/localtimer.h>
+
+#include <plat/mtu.h>
+
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+static void __init ux500_timer_init(void)
+{
+ void __iomem *prcmu_timer_base;
+
+ if (cpu_is_u5500()) {
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = __io_address(U5500_TWD_BASE);
+#endif
+ mtu_base = __io_address(U5500_MTU0_BASE);
+ prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
+ } else if (cpu_is_u8500()) {
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = __io_address(U8500_TWD_BASE);
+#endif
+ mtu_base = __io_address(U8500_MTU0_BASE);
+ prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
+ } else {
+ ux500_unknown_soc();
+ }
+
+ /*
+ * Here we register the timerblocks active in the system.
+ * Localtimers (twd) is started when both cpu is up and running.
+ * MTU register a clocksource, clockevent and sched_clock.
+ * Since the MTU is located in the VAPE power domain
+ * it will be cleared in sleep which makes it unsuitable.
+ * We however need it as a timer tick (clockevent)
+ * during boot to calibrate delay until twd is started.
+ * RTC-RTT have problems as timer tick during boot since it is
+ * depending on delay which is not yet calibrated. RTC-RTT is in the
+ * always-on powerdomain and is used as clockevent instead of twd when
+ * sleeping.
+ * The PRCMU timer 4(3 for DB5500) register a clocksource and
+ * sched_clock with higher rating then MTU since is always-on.
+ *
+ */
+
+ nmdk_timer_init();
+ clksrc_dbx500_prcmu_init(prcmu_timer_base);
+}
+
+static void ux500_timer_reset(void)
+{
+ nmdk_clkevt_reset();
+ nmdk_clksrc_reset();
+}
+
+struct sys_timer ux500_timer = {
+ .init = ux500_timer_init,
+ .resume = ux500_timer_reset,
+};
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index eb2cf7d..d0fbd7f 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x001F0000
orr \rp, \rp, #0x00001000
orr \rv, \rp, #0xf1000000 @ virtual base
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
index 94ff276..40a8c178 100644
--- a/arch/arm/mach-versatile/include/mach/gpio.h
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
deleted file mode 100644
index dacc9d8..0000000
--- a/arch/arm/mach-versatile/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f8ae64b..fda4866 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,7 +35,7 @@
MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 37c23df..feaf9cb 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -103,7 +103,7 @@
MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index 3668cf9..813ee08 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -65,7 +65,7 @@
for (;;) {
wfi();
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 050d65e..fd9e6c7 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
#define DEBUG_LL_UART_OFFSET 0x00009000
- .macro addruart,rp,rv
+ .macro addruart,rp,rv,tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xf8000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-vexpress/include/mach/gpio.h
similarity index 100%
copy from arch/um/include/asm/ftrace.h
copy to arch/arm/mach-vexpress/include/mach/gpio.h
diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h
deleted file mode 100644
index 5b7fcd4..0000000
--- a/arch/arm/mach-vexpress/include/mach/memory.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x60000000)
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d0d267a..1fafc324 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -443,7 +443,7 @@
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index 94a261d..a464c75 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -68,7 +68,7 @@
}
MACHINE_START(BV07, "Benign BV07 Mini Netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = vt8500_reserve_mem,
.map_io = vt8500_map_io,
.init_irq = vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
index f119162..ca292f2 100644
--- a/arch/arm/mach-vt8500/include/mach/debug-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00200000
orr \rv, \rp, #0xf8000000
orr \rp, \rp, #0xd8000000
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
index 94ff276..40a8c178 100644
--- a/arch/arm/mach-vt8500/include/mach/gpio.h
+++ b/arch/arm/mach-vt8500/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
deleted file mode 100644
index 175f914..0000000
--- a/arch/arm/mach-vt8500/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index e73aadb..cf910a9 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -68,7 +68,7 @@
}
MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = wm8505_reserve_mem,
.map_io = wm8505_map_io,
.init_irq = wm8505_init_irq,
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
index 034da3e..5385a42 100644
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -15,16 +15,12 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
}
+#define gpio_to_irq gpio_to_irq
static inline int irq_to_gpio(unsigned irq)
{
diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h
deleted file mode 100644
index f02905b..0000000
--- a/arch/arm/mach-w90x900/include/mach/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 30fccde..31c1090 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90P910EVB, "W90P910EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc910evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc910evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 590c99b..4062e55 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,7 +37,6 @@
MACHINE_START(W90P950EVB, "W90P950EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc950evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc950evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e09c645..0ab9995 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90N960EVB, "W90N960EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc960evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc960evb_init,
diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S
index 9f664d5..3ab0be1 100644
--- a/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ b/arch/arm/mach-zynq/include/mach/debug-macro.S
@@ -17,7 +17,7 @@
#include <mach/zynq_soc.h>
#include <mach/uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =LL_UART_PADDR @ physical
ldr \rv, =LL_UART_VADDR @ virtual
.endm
diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h
deleted file mode 100644
index 35a9263..0000000
--- a/arch/arm/mach-zynq/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/memory.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MEMORY_H__
-#define __MACH_MEMORY_H__
-
-#include <asm/sizes.h>
-
-#define PLAT_PHYS_OFFSET UL(0x0)
-
-#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 88633fe..67f75a0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -819,10 +819,10 @@
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
+ REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 235eb77..e4e7f6c 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -18,12 +18,14 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/memory.h>
#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
+#include <asm/mach/arch.h>
#include "mm.h"
@@ -117,26 +119,36 @@
}
#ifdef CONFIG_MMU
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PMD_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PMD_SHIFT)
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT)
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static pte_t **consistent_pte;
+
+#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
+
+unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+
+void __init init_consistent_dma_size(unsigned long size)
+{
+ unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
+
+ BUG_ON(consistent_pte); /* Check we're called before DMA region init */
+ BUG_ON(base < VMALLOC_END);
+
+ /* Grow region to accommodate specified size */
+ if (base < consistent_base)
+ consistent_base = base;
+}
#include "vmregion.h"
static struct arm_vmregion_head consistent_head = {
.vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
.vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_start = CONSISTENT_BASE,
.vm_end = CONSISTENT_END,
};
@@ -155,7 +167,17 @@
pmd_t *pmd;
pte_t *pte;
int i = 0;
- u32 base = CONSISTENT_BASE;
+ unsigned long base = consistent_base;
+ unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+
+ consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
+ if (!consistent_pte) {
+ pr_err("%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
+ consistent_head.vm_start = base;
do {
pgd = pgd_offset(&init_mm, base);
@@ -198,7 +220,7 @@
size_t align;
int bit;
- if (!consistent_pte[0]) {
+ if (!consistent_pte) {
printk(KERN_ERR "%s: not initialised\n", __func__);
dump_stack();
return NULL;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index f8037ba..04e9a92 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -660,9 +660,6 @@
" ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n"
#endif
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
-#ifdef CONFIG_MMU
- " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n"
-#endif
" vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
" lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
#ifdef CONFIG_HIGHMEM
@@ -681,9 +678,6 @@
MLK(ITCM_OFFSET, (unsigned long) itcm_end),
#endif
MLK(FIXADDR_START, FIXADDR_TOP),
-#ifdef CONFIG_MMU
- MLM(CONSISTENT_BASE, CONSISTENT_END),
-#endif
MLM(VMALLOC_START, VMALLOC_END),
MLM(PAGE_OFFSET, (unsigned long)high_memory),
#ifdef CONFIG_HIGHMEM
@@ -706,9 +700,6 @@
* be detected at build time already.
*/
#ifdef CONFIG_MMU
- BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE);
- BUG_ON(VMALLOC_END > CONSISTENT_BASE);
-
BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR);
BUG_ON(TASK_SIZE > MODULES_VADDR);
#endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 226f180..dc8c550 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -273,6 +273,14 @@
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_SO] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_MT_UNCACHED,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
+ PMD_SECT_UNCACHED | PMD_SECT_XN,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 2e6849b..88fb3d9 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,31 +379,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 4
+.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#endif
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index cd8f79c..9f8fd91 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,31 +394,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
-.equ cpu_arm926_suspend_size, 4 * 4
+.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm926_do_suspend)
ENTRY(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
#endif
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 69e7f2e..7d91545 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -168,20 +168,19 @@
mov pc, lr
.globl cpu_sa1100_suspend_size
-.equ cpu_sa1100_suspend_size, 4*4
+.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_sa1100_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
- stmia r0, {r4 - r7} @ store cp regs
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r5, c13, c0, 0 @ PID
+ mrc p15, 0, r6, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r6} @ store cp regs
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
- ldmia r0, {r4 - r7} @ load cp regs
+ ldmia r0, {r4 - r6} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
@@ -189,13 +188,9 @@
mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- mov r0, r7 @ control register
- mov r2, r5, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r5, c13, c0, 0 @ PID
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
#endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index a923aa0..d061d2f 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -128,20 +128,18 @@
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
-.equ cpu_v6_suspend_size, 4 * 8
+.equ cpu_v6_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v6_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
- mrc p15, 0, r11, c1, c0, 0 @ control register
- stmia r0, {r4 - r11}
- ldmfd sp!, {r4- r11, pc}
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mrc p15, 0, r8, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r9, c1, c0, 0 @ control register
+ stmia r0, {r4 - r9}
+ ldmfd sp!, {r4- r9, pc}
ENDPROC(cpu_v6_do_suspend)
ENTRY(cpu_v6_do_resume)
@@ -150,25 +148,21 @@
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
- ldmia r0, {r4 - r11}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0, {r4 - r9}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mcr p15, 0, r8, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
- mov r0, r11 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v6_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
string cpu_v6_name, "ARMv6-compatible processor"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 9591c8e..2c559ac 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -217,56 +217,50 @@
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 9
+.equ cpu_v7_suspend_size, 4 * 7
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v7_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- stmia r0!, {r4 - r6}
+ mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ stmia r0!, {r4 - r5}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ TTB 0
- mrc p15, 0, r8, c2, c0, 1 @ TTB 1
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r11}
- ldmfd sp!, {r4 - r11, pc}
+ mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r8, c1, c0, 0 @ Control register
+ mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r6 - r10}
+ ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
- ldmia r0!, {r4 - r6}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r11}
+ mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ ldmia r0, {r6 - r10}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ TTB 0
- mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
- teq r4, r10 @ Is it already set?
- mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ teq r4, r9 @ Is it already set?
+ mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
+ mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
dsb
- mov r0, r9 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
__CPUINIT
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 755e1bf..abf0507 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -406,24 +406,23 @@
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 7
+.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmia sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmia sp!, {r4 - r9, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
@@ -433,15 +432,10 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
-
- @ temporarily map resume_turn_on_mmu into the page table,
- @ otherwise prefetch abort occurs after MMU is turned on
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =0x542e @ section flags
+ orr r1, r1, #0x18 @ cache the page table in L2
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
#endif
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index fbc06e5..3277904 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -520,24 +520,23 @@
.align
.globl cpu_xscale_suspend_size
-.equ cpu_xscale_suspend_size, 4 * 7
+.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xscale_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmfd sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmfd sp!, {r4 - r9, pc}
ENDPROC(cpu_xscale_do_suspend)
ENTRY(cpu_xscale_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
@@ -545,13 +544,9 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
#endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 4c8fdbc..a08a951 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -4,50 +4,34 @@
menu "Freescale MXC Implementations"
-config ARCH_MX50_SUPPORTED
- bool
-
-config ARCH_MX53_SUPPORTED
- bool
-
choice
prompt "Freescale CPU family:"
- default ARCH_MX3
+ default ARCH_IMX_V6_V7
-config ARCH_MX1
- bool "MX1-based"
+config ARCH_IMX_V4_V5
+ bool "i.MX1, i.MX21, i.MX25, i.MX27"
+ select AUTO_ZRELADDR
+ select ARM_PATCH_PHYS_VIRT
help
- This enables support for systems based on the Freescale i.MX1 family
+ This enables support for systems based on the Freescale i.MX ARMv4
+ and ARMv5 SoCs
-config ARCH_MX2
- bool "MX2-based"
+config ARCH_IMX_V6_V7
+ bool "i.MX3, i.MX6"
+ select AUTO_ZRELADDR if !ZBOOT_ROM
+ select ARM_PATCH_PHYS_VIRT
help
- This enables support for systems based on the Freescale i.MX2 family
+ This enables support for systems based on the Freescale i.MX3 and i.MX6
+ family.
-config ARCH_MX25
- bool "MX25-based"
- help
- This enables support for systems based on the Freescale i.MX25 family
-
-config ARCH_MX3
- bool "MX3-based"
- help
- This enables support for systems based on the Freescale i.MX3 family
-
-config ARCH_MX503
- bool "i.MX50 + i.MX53"
- select ARCH_MX50_SUPPORTED
- select ARCH_MX53_SUPPORTED
+config ARCH_MX5
+ bool "i.MX50, i.MX51, i.MX53"
+ select AUTO_ZRELADDR
+ select ARM_PATCH_PHYS_VIRT
help
This enables support for machines using Freescale's i.MX50 and i.MX53
processors.
-config ARCH_MX51
- bool "i.MX51"
- select ARCH_MX51_SUPPORTED
- help
- This enables support for systems based on the Freescale i.MX51 family
-
endchoice
source "arch/arm/mach-imx/Kconfig"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index d53c35f..b9f0f5f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,7 @@
# Common support
obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
-# MX51 uses the TZIC interrupt controller, older platforms use AVIC
+obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 175e364..8cced35 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -187,18 +187,11 @@
static int mxc_audmux_v2_init(void)
{
int ret;
-#if defined(CONFIG_ARCH_MX5)
if (cpu_is_mx51()) {
audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
- ret = 0;
- return ret;
- }
-#endif
-#if defined(CONFIG_ARCH_MX3)
- if (cpu_is_mx31())
+ } else if (cpu_is_mx31()) {
audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
-
- else if (cpu_is_mx35()) {
+ } else if (cpu_is_mx35()) {
audmux_clk = clk_get(NULL, "audmux");
if (IS_ERR(audmux_clk)) {
ret = PTR_ERR(audmux_clk);
@@ -207,10 +200,7 @@
return ret;
}
audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
- }
-#endif
-#if defined(CONFIG_SOC_IMX25)
- if (cpu_is_mx25()) {
+ } else if (cpu_is_mx25()) {
audmux_clk = clk_get(NULL, "audmux");
if (IS_ERR(audmux_clk)) {
ret = PTR_ERR(audmux_clk);
@@ -220,7 +210,7 @@
}
audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
}
-#endif /* if defined(CONFIG_SOC_IMX25) */
+
audmux_debugfs_init();
return 0;
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 55d2534..8875fb4 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -50,6 +50,8 @@
void __iomem *avic_base;
+static u32 avic_saved_mask_reg[2];
+
#ifdef CONFIG_MXC_IRQ_PRIOR
static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
{
@@ -90,24 +92,8 @@
}
#endif /* CONFIG_FIQ */
-/* Disable interrupt number "irq" in the AVIC */
-static void mxc_mask_irq(struct irq_data *d)
-{
- __raw_writel(d->irq, avic_base + AVIC_INTDISNUM);
-}
-/* Enable interrupt number "irq" in the AVIC */
-static void mxc_unmask_irq(struct irq_data *d)
-{
- __raw_writel(d->irq, avic_base + AVIC_INTENNUM);
-}
-
-static struct mxc_irq_chip mxc_avic_chip = {
- .base = {
- .irq_ack = mxc_mask_irq,
- .irq_mask = mxc_mask_irq,
- .irq_unmask = mxc_unmask_irq,
- },
+static struct mxc_extra_irq avic_extra_irq = {
#ifdef CONFIG_MXC_IRQ_PRIOR
.set_priority = avic_irq_set_priority,
#endif
@@ -116,6 +102,68 @@
#endif
};
+#ifdef CONFIG_PM
+static void avic_irq_suspend(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ int idx = gc->irq_base >> 5;
+
+ avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
+ __raw_writel(gc->wake_active, avic_base + ct->regs.mask);
+}
+
+static void avic_irq_resume(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ int idx = gc->irq_base >> 5;
+
+ __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+}
+
+#else
+#define avic_irq_suspend NULL
+#define avic_irq_resume NULL
+#endif
+
+static __init void avic_init_gc(unsigned int irq_start)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ int idx = irq_start >> 5;
+
+ gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
+ handle_level_irq);
+ gc->private = &avic_extra_irq;
+ gc->wake_enabled = IRQ_MSK(32);
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_ack = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = avic_irq_suspend;
+ ct->chip.irq_resume = avic_irq_resume;
+ ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH;
+ ct->regs.ack = ct->regs.mask;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
+}
+
+asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+{
+ u32 nivector;
+
+ do {
+ nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
+ if (nivector == 0xffff)
+ break;
+
+ handle_IRQ(nivector, regs);
+ } while (1);
+}
+
/*
* This function initializes the AVIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
@@ -140,11 +188,9 @@
/* all IRQ no FIQ */
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
- for (i = 0; i < AVIC_NUM_IRQS; i++) {
- irq_set_chip_and_handler(i, &mxc_avic_chip.base,
- handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
+
+ for (i = 0; i < AVIC_NUM_IRQS; i += 32)
+ avic_init_gc(i);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
@@ -157,4 +203,3 @@
printk(KERN_INFO "MXC IRQ initialized\n");
}
-
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
index 386e0d5..f5b7e0f 100644
--- a/arch/arm/plat-mxc/cpu.c
+++ b/arch/arm/plat-mxc/cpu.c
@@ -1,5 +1,6 @@
#include <linux/module.h>
+#include <mach/hardware.h>
unsigned int __mxc_cpu_type;
EXPORT_SYMBOL(__mxc_cpu_type);
@@ -9,3 +10,11 @@
__mxc_cpu_type = type;
}
+void imx_print_silicon_rev(const char *cpu, int srev)
+{
+ if (srev == IMX_CHIP_REVISION_UNKNOWN)
+ pr_info("CPU identified as %s, unknown revision\n", cpu);
+ else
+ pr_info("CPU identified as %s, silicon rev %d.%d\n",
+ cpu, (srev >> 4) & 0xf, srev & 0xf);
+}
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index a34b2ae..4d55a7a 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -23,20 +23,6 @@
#include <linux/platform_device.h>
#include <mach/common.h>
-int __init mxc_register_device(struct platform_device *pdev, void *data)
-{
- int ret;
-
- pdev->dev.platform_data = data;
-
- ret = platform_device_register(pdev);
- if (ret)
- pr_debug("Unable to register platform device '%s': %d\n",
- pdev->name, ret);
-
- return ret;
-}
-
struct device mxc_aips_bus = {
.init_name = "mxc_aips",
.parent = &platform_bus,
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index bd294ad..cb3e3ee 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -1,6 +1,6 @@
config IMX_HAVE_PLATFORM_FEC
bool
- default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+ default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
config IMX_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
@@ -31,6 +31,9 @@
config IMX_HAVE_PLATFORM_IMX_KEYPAD
bool
+config IMX_HAVE_PLATFORM_PATA_IMX
+ bool
+
config IMX_HAVE_PLATFORM_IMX_SSI
bool
@@ -76,3 +79,7 @@
config IMX_HAVE_PLATFORM_SPI_IMX
bool
+
+config IMX_HAVE_PLATFORM_AHCI
+ bool
+ default y if ARCH_MX53
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index b41bf97..c11ac84 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
@@ -25,3 +26,4 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
new file mode 100644
index 0000000..d8a56ae
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ahci_imx_data_entry_single(soc, _devid) \
+ { \
+ .devid = _devid, \
+ .iobase = soc ## _SATA_BASE_ADDR, \
+ .irq = soc ## _INT_SATA, \
+ }
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+ imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
+#endif
+
+enum {
+ HOST_CAP = 0x00,
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_PORTS_IMPL = 0x0c,
+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+static struct clk *sata_clk, *sata_ref_clk;
+
+/* AHCI module Initialization, if return 0, initialization is successful. */
+static int imx_sata_init(struct device *dev, void __iomem *addr)
+{
+ u32 tmpdata;
+ int ret = 0;
+ struct clk *clk;
+
+ sata_clk = clk_get(dev, "ahci");
+ if (IS_ERR(sata_clk)) {
+ dev_err(dev, "no sata clock.\n");
+ return PTR_ERR(sata_clk);
+ }
+ ret = clk_enable(sata_clk);
+ if (ret) {
+ dev_err(dev, "can't enable sata clock.\n");
+ goto put_sata_clk;
+ }
+
+ /* Get the AHCI SATA PHY CLK */
+ sata_ref_clk = clk_get(dev, "ahci_phy");
+ if (IS_ERR(sata_ref_clk)) {
+ dev_err(dev, "no sata ref clock.\n");
+ ret = PTR_ERR(sata_ref_clk);
+ goto release_sata_clk;
+ }
+ ret = clk_enable(sata_ref_clk);
+ if (ret) {
+ dev_err(dev, "can't enable sata ref clock.\n");
+ goto put_sata_ref_clk;
+ }
+
+ /* Get the AHB clock rate, and configure the TIMER1MS reg later */
+ clk = clk_get(dev, "ahci_dma");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "no dma clock.\n");
+ ret = PTR_ERR(clk);
+ goto release_sata_ref_clk;
+ }
+ tmpdata = clk_get_rate(clk) / 1000;
+ clk_put(clk);
+
+ writel(tmpdata, addr + HOST_TIMER1MS);
+
+ tmpdata = readl(addr + HOST_CAP);
+ if (!(tmpdata & HOST_CAP_SSS)) {
+ tmpdata |= HOST_CAP_SSS;
+ writel(tmpdata, addr + HOST_CAP);
+ }
+
+ if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
+ writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
+ addr + HOST_PORTS_IMPL);
+
+ return 0;
+
+release_sata_ref_clk:
+ clk_disable(sata_ref_clk);
+put_sata_ref_clk:
+ clk_put(sata_ref_clk);
+release_sata_clk:
+ clk_disable(sata_clk);
+put_sata_clk:
+ clk_put(sata_clk);
+
+ return ret;
+}
+
+static void imx_sata_exit(struct device *dev)
+{
+ clk_disable(sata_ref_clk);
+ clk_put(sata_ref_clk);
+
+ clk_disable(sata_clk);
+ clk_put(sata_clk);
+
+}
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device_dmamask(data->devid, 0,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
+
+struct platform_device *__init imx53_add_ahci_imx(void)
+{
+ struct ahci_platform_data pdata = {
+ .init = imx_sata_init,
+ .exit = imx_sata_exit,
+ };
+
+ return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
index 23ce08e..848038f 100644
--- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
@@ -36,6 +36,11 @@
imx_fsl_usb2_udc_data_entry_single(MX35);
#endif /* ifdef CONFIG_SOC_IMX35 */
+#ifdef CONFIG_SOC_IMX51
+const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX51);
+#endif
+
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index afe60f7..19ad580 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -85,6 +85,12 @@
imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
imx51_imx_i2c_data_entry(0, 1),
imx51_imx_i2c_data_entry(1, 2),
+ {
+ .id = 2,
+ .iobase = MX51_HSI2C_DMA_BASE_ADDR,
+ .iosize = SZ_16K,
+ .irq = MX51_INT_HS_I2C,
+ },
};
#endif /* ifdef CONFIG_SOC_IMX51 */
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
index e1763e0..35851d8 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
@@ -49,6 +49,15 @@
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
+#ifdef CONFIG_SOC_IMX51
+const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
+const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
+ imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
+ imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-pata_imx.c b/arch/arm/plat-mxc/devices/platform-pata_imx.c
new file mode 100644
index 0000000..70e2f2a
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-pata_imx.c
@@ -0,0 +1,59 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_pata_imx_data_entry_single(soc, _size) \
+ { \
+ .iobase = soc ## _ATA_BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_ATA, \
+ }
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX31, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX35, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX51, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX53, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_pata_imx(
+ const struct imx_pata_imx_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device("pata_imx", -1,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
+
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
new file mode 100644
index 0000000..b3b8eed
--- /dev/null
+++ b/arch/arm/plat-mxc/gic.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <asm/exception.h>
+#include <asm/localtimer.h>
+#include <asm/hardware/gic.h>
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat, irqnr;
+
+ do {
+ irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
+ irqnr = irqstat & 0x3ff;
+ if (irqnr == 1023)
+ break;
+
+ if (irqnr > 29 && irqnr < 1021)
+ handle_IRQ(irqnr, regs);
+#ifdef CONFIG_SMP
+ else if (irqnr < 16) {
+ writel_relaxed(irqstat, gic_cpu_base_addr +
+ GIC_CPU_EOI);
+ handle_IPI(irqnr, regs);
+ }
+#endif
+#ifdef CONFIG_LOCAL_TIMERS
+ else if (irqnr == 29) {
+ writel_relaxed(irqstat, gic_cpu_base_addr +
+ GIC_CPU_EOI);
+ handle_local_timer(regs);
+ }
+#endif
+ } while (1);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4e3d978..83b745a 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -13,6 +13,7 @@
struct platform_device;
struct clk;
+enum mxc_cpu_pwr_mode;
extern void mx1_map_io(void);
extern void mx21_map_io(void);
@@ -64,12 +65,72 @@
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_arch_reset_init(void __iomem *);
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
+
+enum mxc_cpu_pwr_mode {
+ WAIT_CLOCKED, /* wfi only */
+ WAIT_UNCLOCKED, /* WAIT */
+ WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
+ STOP_POWER_ON, /* just STOP */
+ STOP_POWER_OFF, /* STOP + SRPG */
+};
+
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
+extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
+void gic_handle_irq(struct pt_regs *);
+
+#define imx1_handle_irq avic_handle_irq
+#define imx21_handle_irq avic_handle_irq
+#define imx25_handle_irq avic_handle_irq
+#define imx27_handle_irq avic_handle_irq
+#define imx31_handle_irq avic_handle_irq
+#define imx35_handle_irq avic_handle_irq
+#define imx50_handle_irq tzic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
+#define imx6q_handle_irq gic_handle_irq
+
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
+extern void imx51_babbage_common_init(void);
+extern void imx53_ard_common_init(void);
+extern void imx53_evk_common_init(void);
+extern void imx53_qsb_common_init(void);
+extern void imx53_smd_common_init(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_pm_init(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index e4dde91..6e192c4 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -12,49 +12,25 @@
*/
#include <mach/hardware.h>
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
#define UART_PADDR MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
#define UART_PADDR MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 543525d..def9ba5 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -263,6 +263,14 @@
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata);
+struct imx_pata_imx_data {
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_pata_imx(
+ const struct imx_pata_imx_data *data);
+
struct imx_mxc_pwm_data {
int id;
resource_size_t iobase;
@@ -313,3 +321,13 @@
struct platform_device *imx_add_imx_dma(void);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+ const char *devid;
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 066d464..9fe0dfc 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,72 +9,22 @@
* published by the Free Software Foundation.
*/
-#include <mach/hardware.h>
+/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
-#define AVIC_NIMASK 0x04
-
- @ this macro disables fast irq (not implemented)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
-#ifndef CONFIG_MXC_TZIC
- ldr \base, =avic_base
- ldr \base, [\base]
-#ifdef CONFIG_MXC_IRQ_PRIOR
- ldr r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
- ldr \base, =tzic_base
- ldr \base, [\base]
-#endif /* CONFIG_MXC_TZIC */
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
- @ this macro checks which interrupt occurred
- @ and returns its number in irqnr
- @ and returns if an interrupt occurred in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-#ifndef CONFIG_MXC_TZIC
- @ Load offset & priority of the highest priority
- @ interrupt pending from AVIC_NIVECSR
- ldr \irqstat, [\base, #0x40]
- @ Shift to get the decoded IRQ number, using ASR so
- @ 'no interrupt pending' becomes 0xffffffff
- mov \irqnr, \irqstat, asr #16
- @ set zero flag if IRQ + 1 == 0
- adds \tmp, \irqnr, #1
-#ifdef CONFIG_MXC_IRQ_PRIOR
- bicne \tmp, \irqstat, #0xFFFFFFE0
- strne \tmp, [\base, #AVIC_NIMASK]
- streq r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
- @ Load offset & priority of the highest priority
- @ interrupt pending.
- @ 0x080 is INTSEC0 register
- @ 0xD80 is HIPND0 register
- mov \irqnr, #0
-1000: add \irqstat, \base, \irqnr, lsr #3
- ldr \tmp, [\irqstat, #0xd80]
- ldr \irqstat, [\irqstat, #0x080]
- ands \tmp, \tmp, \irqstat
- bne 1001f
- add \irqnr, \irqnr, #32
- cmp \irqnr, #128
- blo 1000b
- b 2001f
-1001: mov \irqstat, #1
-1002: tst \tmp, \irqstat
- bne 2002f
- movs \tmp, \tmp, lsr #1
- addne \irqnr, \irqnr, #1
- bne 1002b
-2001:
- mov \irqnr, #0
-2002:
- movs \irqnr, \irqnr
-#endif
+ .endm
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ .endm
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
.endm
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 31c820c..40a8c178 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -1,39 +1 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_GPIO_H__
-#define __ASM_ARCH_MXC_GPIO_H__
-
-#include <linux/spinlock.h>
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
-/* range e.g. GPIO_1_5 is gpio 5 under linux */
-#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
-
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio))
-#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
-
-#endif
+/* empty */
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a8bfd56..a599f01 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -81,11 +81,21 @@
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
+ * TZIC 0xe0000000+0x004000 -> 0xf5000000+0x004000
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
- * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * mx53:
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
+ * mx6q:
+ * SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000
+ * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
+ * ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000
+ * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
*/
#define IMX_IO_P2V(x) ( \
0xf4000000 + \
@@ -97,6 +107,7 @@
#include <mach/mxc.h>
+#include <mach/mx6q.h>
#include <mach/mx50.h>
#include <mach/mx51.h>
#include <mach/mx53.h>
@@ -116,4 +127,10 @@
.type = _type, \
}
+/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* range e.g. GPIO_1_5 is gpio 5 under linux */
+#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
+
+#define IMX_GPIO_TO_IRQ(gpio) (MXC_GPIO_IRQ_START + (gpio))
+
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 4a5dc5c..375cdd0 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -11,14 +11,10 @@
/**
* struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init: Initialise gpio's and other board specific things
- * @exit: Free everything initialised by @init
* @bitrate: Bus speed measured in Hz
*
**/
struct imxi2c_platform_data {
- int (*init)(struct device *dev);
- void (*exit)(struct device *dev);
int bitrate;
};
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 4347a87d..338300b18 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -14,32 +14,22 @@
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffffffff
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#include <mach/hardware.h>
-
#define __arch_ioremap __imx_ioremap
#define __arch_iounmap __iounmap
#define addr_in_module(addr, mod) \
((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
+extern void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int);
+
static inline void __iomem *
__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
{
- if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) {
- /*
- * Access all peripherals below 0x80000000 as nonshared device
- * on mx3, but leave l2cc alone. Otherwise cache corruptions
- * can occur.
- */
- if (phys_addr < 0x80000000 &&
- !addr_in_module(phys_addr, MX3x_L2CC))
- mtype = MT_DEVICE_NONSHARED;
- }
-
- return __arm_ioremap(phys_addr, size, mtype);
+ if (imx_ioremap != NULL)
+ return imx_ioremap(phys_addr, size, mtype);
+ else
+ return __arm_ioremap(phys_addr, size, mtype);
}
-#endif
/* io address mapping macro */
#define __io(a) __typesafe_io(a)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c92f0b1..63f22a0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -735,6 +735,7 @@
#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
/*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index df6acc0..c7f5169a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -14,6 +14,8 @@
#define __MACH_IOMUX_MX51_H__
#include <mach/iomux-v3.h>
+#define __NA_ 0x000
+
/* Pad control groupings */
#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
@@ -47,1521 +49,765 @@
/* Raw pin modes without pad control */
/* PAD MUX ALT INPSE PATH PADCTRL */
-#define _MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x5c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x5c, 7, 0x08d8, 0, 0)
-#define _MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x5c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x5c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x5c, 0x14, 0x09b4, 0, 0)
-#define _MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x5c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x5c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x60, 7, 0x08d4, 0, 0)
-#define _MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x60, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x60, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x60, 3, 0x09ec, 0, 0)
-#define _MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x60, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x60, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x64, 7, 0x08e4, 0, 0)
-#define _MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x64, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x64, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x64, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x64, 4, 0x09f0, 1, 0)
-#define _MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x64, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x68, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x68, 7, 0x08e8, 0, 0)
-#define _MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x68, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x68, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x68, 0x14, 0x09b0, 0, 0)
-#define _MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x68, 3, 0x09e8, 1, 0)
-#define _MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x68, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x6c, 5, 0x08c8, 0, 0)
-#define _MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x6c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x6c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x6c, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x6c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x70, 5, 0x08c4, 0, 0)
-#define _MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x70, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x70, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x70, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x70, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x74, 5, 0x08cc, 0, 0)
-#define _MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x74, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x74, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x74, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x78, 5, 0x08d0, 0, 0)
-#define _MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x78, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x78, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x78, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x78, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x7c, 5, 0x08f8, 0, 0)
-#define _MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x7c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x7c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x7c, 0x14, 0x09bc, 0, 0)
-#define _MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x7c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x7c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x80, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x80, 1, 0x09c8, 0, 0)
-#define _MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x80, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x80, 3, 0x09f4, 0, 0)
-#define _MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x80, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x84, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x84, 1, 0x09cc, 0, 0)
-#define _MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x84, 4, 0x09e8, 3, 0)
-#define _MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x84, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x84, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x88, 5, 0x08f4, 0, 0)
-#define _MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x88, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x88, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x88, 0x14, 0x09b8, 0, 0)
-#define _MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x88, 3, 0x09f0, 3, 0)
-#define _MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x88, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x8c, 5, 0x08f0, 0, 0)
-#define _MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x8c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x8c, 1, 0x09d0, 0, 0)
-#define _MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x8c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x90, 5, 0x08ec, 0, 0)
-#define _MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x90, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x90, 1, 0x09d4, 0, 0)
-#define _MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x90, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x94, 5, 0x08fc, 0, 0)
-#define _MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x94, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x94, 1, 0x09d8, 0, 0)
-#define _MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x94, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x98, 5, 0x0900, 0, 0)
-#define _MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x98, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x98, 1, 0x09dc, 0, 0)
-#define _MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x98, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x9c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x9c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x9c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0xa0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0xa0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0xa0, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0xa4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0xa4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0xa4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0xa8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0xa8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0xa8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0xac, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0xac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0xac, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0xb0, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0xb0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0xb0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0xb4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0xb4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0xb8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0xb8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0xb8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0xbc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0xbc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0xbc, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0xc0, 6, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0xc0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0xc0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0xc0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0xc4, 5, 0x09a0, 0, 0)
-#define _MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0xc4, 6, 0x0908, 0, 0)
-#define _MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0xc4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0xc4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0xc4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0xc8, 5, 0x099c, 0, 0)
-#define _MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0xc8, 6, 0x09a4, 0, 0)
-#define _MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0xc8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0xc8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0xc8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0xcc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0xd0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0xd4, 6, 0x08e0, 0, 0)
-#define _MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0xd4, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0xd4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0xd4, 3, 0x0954, 0, 0)
-#define _MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0xd4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0xd4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0xd8, 6, 0x08dc, 0, 0)
-#define _MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0xd8, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0xd8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0xd8, 3, 0x095c, 0, 0)
-#define _MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0xd8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0xd8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0xdc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0xdc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0xe0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0xe0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0xe4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0xe4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0xe8, 6, 0x08d8, 1, 0)
-#define _MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0xe8, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0xe8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0xe8, 3, 0x0960, 0, 0)
-#define _MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0xe8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0xe8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0xec, 6, 0x08d4, 1, 0)
-#define _MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0xec, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0xec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0xec, 3, 0x0964, 0, 0)
-#define _MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0xec, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0xec, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0xf0, 6, 0x08e4, 1, 0)
-#define _MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0xf0, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0xf0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0xf0, 3, 0x0970, 0, 0)
-#define _MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0xf0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0xf0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0xf4, 6, 0x08e8, 1, 0)
-#define _MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0xf4, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0xf4, 4, 0x0904, 0, 0)
-#define _MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0xf4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0xf4, 3, 0x0950, 0, 0)
-#define _MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0xf4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0xf4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0xf8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0xf8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0xfc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0xfc, 1, 0x0978, 0, 0)
-#define _MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x097c, 0, 0)
-#define _MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x0980, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x093c, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x0984, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x0940, 0, 0)
-#define _MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x0988, 0, 0)
-#define _MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x098c, 0, 0)
-#define _MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x0990, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x0944, 0, 0)
-#define _MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x0930, 0, 0)
-#define _MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x0994, 0, 0)
-#define _MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x0948, 0, 0)
-#define _MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x091c, 0, 0)
-#define _MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x09a8, 0, 0)
-#define _MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x094c, 0, 0)
-#define _MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0x0a20, 0, 0)
-#define _MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x0968, 0, 0)
-#define _MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x09f8, 0, 0)
-#define _MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x0998, 0, 0)
-#define _MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x0914, 0, 0)
-#define _MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0x0a24, 0, 0)
-#define _MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0x0a1c, 0, 0)
-#define _MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x0928, 0, 0)
-#define _MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0974, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x0938, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x0934, 0, 0)
-#define _MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x0930, 1, 0)
-#define _MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x096c, 0, 0)
-#define _MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x0948, 1, 0)
-#define _MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x0944, 1, 0)
-#define _MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x0958, 0, 0)
-#define _MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x0940, 1, 0)
-#define _MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x093c, 1, 0)
-#define _MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x09fc, 0, 0)
-#define _MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0x0a00, 0, 0)
-#define _MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0x0a04, 0, 0)
-#define _MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0x0a08, 0, 0)
-#define _MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0x0a0c, 0, 0)
-#define _MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0x0a10, 0, 0)
-#define _MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0x0a14, 0, 0)
-#define _MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0x0a18, 0, 0)
-#define _MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x0998, 1, 0)
-#define _MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, 0x000, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, 0x000, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x09f4, 2, 0)
-#define _MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x09b4, 1, 0)
-#define _MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x08c4, 1, 0)
-#define _MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x08cc, 1, 0)
-#define _MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x08c8, 1, 0)
-#define _MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x08d0, 1, 0)
-#define _MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x09b0, 1, 0)
-#define _MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x09e4, 0, 0)
-#define _MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x09e0, 0, 0)
-#define _MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0)
-#define _MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x09f4, 4, 0)
-#define _MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0000, 0, 0)
-#define _MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0000, 0, 0)
-#define _MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, 0x0000, 0, 0)
-#define _MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x090c, 0, 0)
-#define _MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x0910, 0, 0)
-#define _MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x09b8, 1, 0)
-#define _MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x09f0, 4, 0)
-#define _MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x09bc, 1, 0)
-#define _MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x0914, 1, 0)
-#define _MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x09b8, 2, 0)
-#define _MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x091c, 1, 0)
-#define _MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x09bc, 2, 0)
-#define _MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x09f4, 6, 0)
-#define _MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x0918, 0, 0)
-#define _MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0)
-#define _MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0)
-#define _MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x0920, 0, 0)
-#define _MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x0928, 1, 0)
-#define _MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x0934, 1, 0)
-#define _MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x0978, 1, 0)
-#define _MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x097c, 1, 0)
-#define _MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x0980, 1, 0)
-#define _MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x0984, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x09a4, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x09c4, 0, 0)
-#define _MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x0988, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x09c4, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x098c, 1, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x0990, 1, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x0994, 1, 0)
-#define _MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x09a8, 1, 0)
-#define _MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x09a0, 1, 0)
-#define _MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x09c0, 0, 0)
-#define _MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x099c, 1, 0)
-#define _MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x0950, 1, 0)
-#define _MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x0954, 1, 0)
-#define _MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x095c, 1, 0)
-#define _MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x09c0, 1, 0)
-#define _MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x0960, 1, 0)
-#define _MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x0964, 1, 0)
-#define _MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x09c8, 1, 0)
-#define _MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x09f4, 8, 0)
-#define _MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x09f8, 1, 0)
-#define _MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x0970, 1, 0)
-#define _MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x09cc, 1, 0)
-#define _MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0x0a1c, 1, 0)
-#define _MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x09d0, 1, 0)
-#define _MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0x0a24, 1, 0)
-#define _MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x09d4, 1, 0)
-#define _MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0x0a20, 1, 0)
-#define _MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x09d8, 1, 0)
-#define _MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x09fc, 1, 0)
-#define _MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x08f4, 1, 0)
-#define _MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0x0a00, 1, 0)
-#define _MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x094c, 1, 0)
-#define _MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x09dc, 1, 0)
-#define _MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0x0a04, 1, 0)
-#define _MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x08f0, 1, 0)
-#define _MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x0968, 1, 0)
-#define _MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0x0a08, 1, 0)
-#define _MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x08ec, 1, 0)
-#define _MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x096c, 1, 0)
-#define _MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0x0a0c, 1, 0)
-#define _MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x08fc, 1, 0)
-#define _MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x0974, 1, 0)
-#define _MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0x0a10, 1, 0)
-#define _MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x0900, 1, 0)
-#define _MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x0958, 1, 0)
-#define _MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0x0a14, 1, 0)
-#define _MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x08f8, 1, 0)
-#define _MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0x0a18, 1, 0)
-#define _MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x08e0, 1, 0)
-#define _MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x091c, 2, 0)
-#define _MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x08dc, 1, 0)
-#define _MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x0914, 2, 0)
-#define _MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x08d8, 2, 0)
-#define _MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x0918, 1, 0)
-#define _MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x000, 0x01c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x000, 0x020, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x000, 0x024, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x000, 0x028, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x08d4, 2, 0)
-#define _MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x000, 0x02c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x000, 0x030, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x000, 0x034, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x000, 0x038, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x08e4, 2, 0)
-#define _MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x000, 0x044, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x000, 0x048, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x000, 0x03c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x000, 0x040, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x08e8, 2, 0)
-#define _MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x0920, 1, 0)
-#define _MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x0924, 0, 0)
-#define _MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x0918, 2, 0)
-#define _MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x000, 0x04c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x000, 0x050, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x000, 0x054, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x000, 0x058, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x000, 0x3b4, 2, 0x091c, 3, 0)
-#define _MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x09b0, 2, 0)
-#define _MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x0914, 3, 0)
-#define _MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x09b4, 2, 0)
-#define _MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x0918, 3, 0)
-#define _MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x0924, 1, 0)
-#define _MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x09b8, 3, 0)
-#define _MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x090c, 1, 0)
-#define _MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x09bc, 3, 0)
-#define _MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x0910, 1, 0)
-#define _MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x0908, 1, 0)
-#define _MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x0938, 1, 0)
-#define _MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x099c, 2, 0)
-#define _MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, 0x0000, 0, 0)
/* The same pins as above but with the default pad control values applied */
-#define MX51_PAD_EIM_D16__AUD4_RXFS (_MX51_PAD_EIM_D16__AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__AUD5_TXD (_MX51_PAD_EIM_D16__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__EIM_D16 (_MX51_PAD_EIM_D16__EIM_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__GPIO2_0 (_MX51_PAD_EIM_D16__GPIO2_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__I2C1_SDA (_MX51_PAD_EIM_D16__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D16__UART2_CTS (_MX51_PAD_EIM_D16__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D16__USBH2_DATA0 (_MX51_PAD_EIM_D16__USBH2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__AUD5_RXD (_MX51_PAD_EIM_D17__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__EIM_D17 (_MX51_PAD_EIM_D17__EIM_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__GPIO2_1 (_MX51_PAD_EIM_D17__GPIO2_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__UART2_RXD (_MX51_PAD_EIM_D17__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D17__UART3_CTS (_MX51_PAD_EIM_D17__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D17__USBH2_DATA1 (_MX51_PAD_EIM_D17__USBH2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__AUD5_TXC (_MX51_PAD_EIM_D18__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__EIM_D18 (_MX51_PAD_EIM_D18__EIM_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__GPIO2_2 (_MX51_PAD_EIM_D18__GPIO2_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__UART2_TXD (_MX51_PAD_EIM_D18__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D18__UART3_RTS (_MX51_PAD_EIM_D18__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D18__USBH2_DATA2 (_MX51_PAD_EIM_D18__USBH2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__AUD4_RXC (_MX51_PAD_EIM_D19__AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__AUD5_TXFS (_MX51_PAD_EIM_D19__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__EIM_D19 (_MX51_PAD_EIM_D19__EIM_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__GPIO2_3 (_MX51_PAD_EIM_D19__GPIO2_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__I2C1_SCL (_MX51_PAD_EIM_D19__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D19__UART2_RTS (_MX51_PAD_EIM_D19__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D19__USBH2_DATA3 (_MX51_PAD_EIM_D19__USBH2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__AUD4_TXD (_MX51_PAD_EIM_D20__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__EIM_D20 (_MX51_PAD_EIM_D20__EIM_D20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__GPIO2_4 (_MX51_PAD_EIM_D20__GPIO2_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB (_MX51_PAD_EIM_D20__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__USBH2_DATA4 (_MX51_PAD_EIM_D20__USBH2_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__AUD4_RXD (_MX51_PAD_EIM_D21__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__EIM_D21 (_MX51_PAD_EIM_D21__EIM_D21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__GPIO2_5 (_MX51_PAD_EIM_D21__GPIO2_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB (_MX51_PAD_EIM_D21__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__USBH2_DATA5 (_MX51_PAD_EIM_D21__USBH2_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__AUD4_TXC (_MX51_PAD_EIM_D22__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__EIM_D22 (_MX51_PAD_EIM_D22__EIM_D22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__GPIO2_6 (_MX51_PAD_EIM_D22__GPIO2_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__USBH2_DATA6 (_MX51_PAD_EIM_D22__USBH2_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__AUD4_TXFS (_MX51_PAD_EIM_D23__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__EIM_D23 (_MX51_PAD_EIM_D23__EIM_D23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__GPIO2_7 (_MX51_PAD_EIM_D23__GPIO2_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__SPDIF_OUT1 (_MX51_PAD_EIM_D23__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__USBH2_DATA7 (_MX51_PAD_EIM_D23__USBH2_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__AUD6_RXFS (_MX51_PAD_EIM_D24__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__EIM_D24 (_MX51_PAD_EIM_D24__EIM_D24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__GPIO2_8 (_MX51_PAD_EIM_D24__GPIO2_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__I2C2_SDA (_MX51_PAD_EIM_D24__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D24__UART3_CTS (_MX51_PAD_EIM_D24__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D24__USBOTG_DATA0 (_MX51_PAD_EIM_D24__USBOTG_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D25__EIM_D25 (_MX51_PAD_EIM_D25__EIM_D25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D25__KEY_COL6 (_MX51_PAD_EIM_D25__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D25__UART2_CTS (_MX51_PAD_EIM_D25__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D25__UART3_RXD (_MX51_PAD_EIM_D25__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D25__USBOTG_DATA1 (_MX51_PAD_EIM_D25__USBOTG_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D26__EIM_D26 (_MX51_PAD_EIM_D26__EIM_D26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D26__KEY_COL7 (_MX51_PAD_EIM_D26__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D26__UART2_RTS (_MX51_PAD_EIM_D26__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D26__UART3_TXD (_MX51_PAD_EIM_D26__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D26__USBOTG_DATA2 (_MX51_PAD_EIM_D26__USBOTG_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__AUD6_RXC (_MX51_PAD_EIM_D27__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__EIM_D27 (_MX51_PAD_EIM_D27__EIM_D27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__GPIO2_9 (_MX51_PAD_EIM_D27__GPIO2_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__I2C2_SCL (_MX51_PAD_EIM_D27__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D27__UART3_RTS (_MX51_PAD_EIM_D27__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D27__USBOTG_DATA3 (_MX51_PAD_EIM_D27__USBOTG_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__AUD6_TXD (_MX51_PAD_EIM_D28__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__EIM_D28 (_MX51_PAD_EIM_D28__EIM_D28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__KEY_ROW4 (_MX51_PAD_EIM_D28__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__USBOTG_DATA4 (_MX51_PAD_EIM_D28__USBOTG_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__AUD6_RXD (_MX51_PAD_EIM_D29__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__EIM_D29 (_MX51_PAD_EIM_D29__EIM_D29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__KEY_ROW5 (_MX51_PAD_EIM_D29__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__USBOTG_DATA5 (_MX51_PAD_EIM_D29__USBOTG_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__AUD6_TXC (_MX51_PAD_EIM_D30__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__EIM_D30 (_MX51_PAD_EIM_D30__EIM_D30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__KEY_ROW6 (_MX51_PAD_EIM_D30__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__USBOTG_DATA6 (_MX51_PAD_EIM_D30__USBOTG_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__AUD6_TXFS (_MX51_PAD_EIM_D31__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__EIM_D31 (_MX51_PAD_EIM_D31__EIM_D31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__KEY_ROW7 (_MX51_PAD_EIM_D31__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__USBOTG_DATA7 (_MX51_PAD_EIM_D31__USBOTG_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A16__EIM_A16 (_MX51_PAD_EIM_A16__EIM_A16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A16__GPIO2_10 (_MX51_PAD_EIM_A16__GPIO2_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 (_MX51_PAD_EIM_A16__OSC_FREQ_SEL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A17__EIM_A17 (_MX51_PAD_EIM_A17__EIM_A17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A17__GPIO2_11 (_MX51_PAD_EIM_A17__GPIO2_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 (_MX51_PAD_EIM_A17__OSC_FREQ_SEL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A18__BOOT_LPB0 (_MX51_PAD_EIM_A18__BOOT_LPB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A18__EIM_A18 (_MX51_PAD_EIM_A18__EIM_A18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A18__GPIO2_12 (_MX51_PAD_EIM_A18__GPIO2_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A19__BOOT_LPB1 (_MX51_PAD_EIM_A19__BOOT_LPB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A19__EIM_A19 (_MX51_PAD_EIM_A19__EIM_A19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A19__GPIO2_13 (_MX51_PAD_EIM_A19__GPIO2_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 (_MX51_PAD_EIM_A20__BOOT_UART_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A20__EIM_A20 (_MX51_PAD_EIM_A20__EIM_A20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A20__GPIO2_14 (_MX51_PAD_EIM_A20__GPIO2_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 (_MX51_PAD_EIM_A21__BOOT_UART_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A21__EIM_A21 (_MX51_PAD_EIM_A21__EIM_A21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A21__GPIO2_15 (_MX51_PAD_EIM_A21__GPIO2_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A22__EIM_A22 (_MX51_PAD_EIM_A22__EIM_A22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A22__GPIO2_16 (_MX51_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN (_MX51_PAD_EIM_A23__BOOT_HPN_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A23__EIM_A23 (_MX51_PAD_EIM_A23__EIM_A23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A23__GPIO2_17 (_MX51_PAD_EIM_A23__GPIO2_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A24__EIM_A24 (_MX51_PAD_EIM_A24__EIM_A24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A24__GPIO2_18 (_MX51_PAD_EIM_A24__GPIO2_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A24__USBH2_CLK (_MX51_PAD_EIM_A24__USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__DISP1_PIN4 (_MX51_PAD_EIM_A25__DISP1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__EIM_A25 (_MX51_PAD_EIM_A25__EIM_A25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__GPIO2_19 (_MX51_PAD_EIM_A25__GPIO2_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__USBH2_DIR (_MX51_PAD_EIM_A25__USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN (_MX51_PAD_EIM_A26__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK (_MX51_PAD_EIM_A26__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__EIM_A26 (_MX51_PAD_EIM_A26__EIM_A26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__GPIO2_20 (_MX51_PAD_EIM_A26__GPIO2_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__USBH2_STP (_MX51_PAD_EIM_A26__USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN (_MX51_PAD_EIM_A27__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__DISP1_PIN1 (_MX51_PAD_EIM_A27__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__EIM_A27 (_MX51_PAD_EIM_A27__EIM_A27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__GPIO2_21 (_MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__USBH2_NXT (_MX51_PAD_EIM_A27__USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB0__EIM_EB0 (_MX51_PAD_EIM_EB0__EIM_EB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB1__EIM_EB1 (_MX51_PAD_EIM_EB1__EIM_EB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__AUD5_RXFS (_MX51_PAD_EIM_EB2__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__CSI1_D2 (_MX51_PAD_EIM_EB2__CSI1_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__EIM_EB2 (_MX51_PAD_EIM_EB2__EIM_EB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__FEC_MDIO (_MX51_PAD_EIM_EB2__FEC_MDIO | \
+#define MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x05c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x05c, 7, 0x8d8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x05c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, 0x14, 0x9b4, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x05c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x060, 7, 0x8d4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x060, 3, 0x9ec, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x060, 4, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x064, 7, 0x8e4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x064, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x064, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x064, 4, 0x9f0, 1, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x068, 7, 0x8e8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x068, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, 0x14, 0x9b0, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x068, 3, 0x9e8, 1, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x06c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x06c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x06c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x06c, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x070, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x074, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x074, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x078, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x078, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x078, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x07c, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x07c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x07c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x07c, 0x14, 0x9bc, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x07c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x080, 1, 0x9c8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x088, 0x14, 0x9b8, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x08c, 5, 0x8f0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x08c, 1, 0x9d0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x08c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x090, 5, 0x8ec, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x090, 1, 0x9d4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x094, 5, 0x8fc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x094, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x094, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x098, 5, 0x900, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x098, 1, 0x9dc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x098, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x09c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x09c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0x0a0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0x0a4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0x0a4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0x0a8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0x0a8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0x0ac, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0x0b0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0x0b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0x0b8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0x0b8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0x0bc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0x0c0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0x0c0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0x0c4, 5, 0x9a0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0x0c4, 6, 0x908, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0x0c8, 5, 0x99c, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0x0c8, 6, 0x9a4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0x0c8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0x0d4, 6, 0x8e0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0x0d4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__FEC_MDIO (IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, 0) | \
MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
-#define MX51_PAD_EIM_EB2__GPIO2_22 (_MX51_PAD_EIM_EB2__GPIO2_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 (_MX51_PAD_EIM_EB2__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__AUD5_RXC (_MX51_PAD_EIM_EB3__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__CSI1_D3 (_MX51_PAD_EIM_EB3__CSI1_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__EIM_EB3 (_MX51_PAD_EIM_EB3__EIM_EB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__FEC_RDATA1 (_MX51_PAD_EIM_EB3__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__GPIO2_23 (_MX51_PAD_EIM_EB3__GPIO2_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 (_MX51_PAD_EIM_EB3__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_OE__EIM_OE (_MX51_PAD_EIM_OE__EIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_OE__GPIO2_24 (_MX51_PAD_EIM_OE__GPIO2_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS0__EIM_CS0 (_MX51_PAD_EIM_CS0__EIM_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS0__GPIO2_25 (_MX51_PAD_EIM_CS0__GPIO2_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS1__EIM_CS1 (_MX51_PAD_EIM_CS1__EIM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS1__GPIO2_26 (_MX51_PAD_EIM_CS1__GPIO2_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__AUD5_TXD (_MX51_PAD_EIM_CS2__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__CSI1_D4 (_MX51_PAD_EIM_CS2__CSI1_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__EIM_CS2 (_MX51_PAD_EIM_CS2__EIM_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__FEC_RDATA2 (_MX51_PAD_EIM_CS2__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__GPIO2_27 (_MX51_PAD_EIM_CS2__GPIO2_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__USBOTG_STP (_MX51_PAD_EIM_CS2__USBOTG_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__AUD5_RXD (_MX51_PAD_EIM_CS3__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__CSI1_D5 (_MX51_PAD_EIM_CS3__CSI1_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__EIM_CS3 (_MX51_PAD_EIM_CS3__EIM_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__FEC_RDATA3 (_MX51_PAD_EIM_CS3__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__GPIO2_28 (_MX51_PAD_EIM_CS3__GPIO2_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__USBOTG_NXT (_MX51_PAD_EIM_CS3__USBOTG_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__AUD5_TXC (_MX51_PAD_EIM_CS4__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__CSI1_D6 (_MX51_PAD_EIM_CS4__CSI1_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__EIM_CS4 (_MX51_PAD_EIM_CS4__EIM_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__FEC_RX_ER (_MX51_PAD_EIM_CS4__FEC_RX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_EIM_CS4__GPIO2_29 (_MX51_PAD_EIM_CS4__GPIO2_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__USBOTG_CLK (_MX51_PAD_EIM_CS4__USBOTG_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__AUD5_TXFS (_MX51_PAD_EIM_CS5__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__CSI1_D7 (_MX51_PAD_EIM_CS5__CSI1_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK (_MX51_PAD_EIM_CS5__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__EIM_CS5 (_MX51_PAD_EIM_CS5__EIM_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__FEC_CRS (_MX51_PAD_EIM_CS5__FEC_CRS | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_EIM_CS5__GPIO2_30 (_MX51_PAD_EIM_CS5__GPIO2_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__USBOTG_DIR (_MX51_PAD_EIM_CS5__USBOTG_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DTACK__EIM_DTACK (_MX51_PAD_EIM_DTACK__EIM_DTACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DTACK__GPIO2_31 (_MX51_PAD_EIM_DTACK__GPIO2_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_LBA__EIM_LBA (_MX51_PAD_EIM_LBA__EIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_LBA__GPIO3_1 (_MX51_PAD_EIM_LBA__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CRE__EIM_CRE (_MX51_PAD_EIM_CRE__EIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CRE__GPIO3_2 (_MX51_PAD_EIM_CRE__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DRAM_CS1__DRAM_CS1 (_MX51_PAD_DRAM_CS1__DRAM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__GPIO3_3 (_MX51_PAD_NANDF_WE_B__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B (_MX51_PAD_NANDF_WE_B__NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW (_MX51_PAD_NANDF_WE_B__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0 (_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__GPIO3_4 (_MX51_PAD_NANDF_RE_B__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B (_MX51_PAD_NANDF_RE_B__NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR (_MX51_PAD_NANDF_RE_B__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1 (_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_ALE__GPIO3_5 (_MX51_PAD_NANDF_ALE__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_ALE__NANDF_ALE (_MX51_PAD_NANDF_ALE__NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN (_MX51_PAD_NANDF_ALE__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CLE__GPIO3_6 (_MX51_PAD_NANDF_CLE__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CLE__NANDF_CLE (_MX51_PAD_NANDF_CLE__NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B (_MX51_PAD_NANDF_CLE__PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__GPIO3_7 (_MX51_PAD_NANDF_WP_B__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B (_MX51_PAD_NANDF_WP_B__NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK (_MX51_PAD_NANDF_WP_B__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2 (_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 (_MX51_PAD_NANDF_RB0__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__GPIO3_8 (_MX51_PAD_NANDF_RB0__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__NANDF_RB0 (_MX51_PAD_NANDF_RB0__NANDF_RB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ (_MX51_PAD_NANDF_RB0__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__SD3_DATA3 (_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI (_MX51_PAD_NANDF_RB1__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY (_MX51_PAD_NANDF_RB1__ECSPI2_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__GPIO3_9 (_MX51_PAD_NANDF_RB1__GPIO3_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__NANDF_RB1 (_MX51_PAD_NANDF_RB1__NANDF_RB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__PATA_IORDY (_MX51_PAD_NANDF_RB1__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__SD4_CMD (_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT (_MX51_PAD_NANDF_RB2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK (_MX51_PAD_NANDF_RB2__ECSPI2_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__FEC_COL (_MX51_PAD_NANDF_RB2__FEC_COL | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_NANDF_RB2__GPIO3_10 (_MX51_PAD_NANDF_RB2__GPIO3_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__NANDF_RB2 (_MX51_PAD_NANDF_RB2__NANDF_RB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP (_MX51_PAD_NANDF_RB2__USBH3_H3_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__USBH3_NXT (_MX51_PAD_NANDF_RB2__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT (_MX51_PAD_NANDF_RB3__DISP1_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO (_MX51_PAD_NANDF_RB3__ECSPI2_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK (_MX51_PAD_NANDF_RB3__FEC_RX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_NANDF_RB3__GPIO3_11 (_MX51_PAD_NANDF_RB3__GPIO3_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__NANDF_RB3 (_MX51_PAD_NANDF_RB3__NANDF_RB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__USBH3_CLK (_MX51_PAD_NANDF_RB3__USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM (_MX51_PAD_NANDF_RB3__USBH3_H3_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO_NAND__GPIO_NAND (_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ (_MX51_PAD_GPIO_NAND__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS0__GPIO3_16 (_MX51_PAD_NANDF_CS0__GPIO3_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS0__NANDF_CS0 (_MX51_PAD_NANDF_CS0__NANDF_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS1__GPIO3_17 (_MX51_PAD_NANDF_CS1__GPIO3_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS1__NANDF_CS1 (_MX51_PAD_NANDF_CS1__NANDF_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK (_MX51_PAD_NANDF_CS2__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER (_MX51_PAD_NANDF_CS2__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS2__GPIO3_18 (_MX51_PAD_NANDF_CS2__GPIO3_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__NANDF_CS2 (_MX51_PAD_NANDF_CS2__NANDF_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__PATA_CS_0 (_MX51_PAD_NANDF_CS2__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__SD4_CLK (_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP (_MX51_PAD_NANDF_CS2__USBH3_H1_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__FEC_MDC (_MX51_PAD_NANDF_CS3__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS3__GPIO3_19 (_MX51_PAD_NANDF_CS3__GPIO3_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__NANDF_CS3 (_MX51_PAD_NANDF_CS3__NANDF_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__PATA_CS_1 (_MX51_PAD_NANDF_CS3__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__SD4_DAT0 (_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM (_MX51_PAD_NANDF_CS3__USBH3_H1_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1 (_MX51_PAD_NANDF_CS4__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS4__GPIO3_20 (_MX51_PAD_NANDF_CS4__GPIO3_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__NANDF_CS4 (_MX51_PAD_NANDF_CS4__NANDF_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__PATA_DA_0 (_MX51_PAD_NANDF_CS4__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__SD4_DAT1 (_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__USBH3_STP (_MX51_PAD_NANDF_CS4__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2 (_MX51_PAD_NANDF_CS5__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS5__GPIO3_21 (_MX51_PAD_NANDF_CS5__GPIO3_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__NANDF_CS5 (_MX51_PAD_NANDF_CS5__NANDF_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__PATA_DA_1 (_MX51_PAD_NANDF_CS5__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__SD4_DAT2 (_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__USBH3_DIR (_MX51_PAD_NANDF_CS5__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__CSPI_SS3 (_MX51_PAD_NANDF_CS6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3 (_MX51_PAD_NANDF_CS6__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS6__GPIO3_22 (_MX51_PAD_NANDF_CS6__GPIO3_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__NANDF_CS6 (_MX51_PAD_NANDF_CS6__NANDF_CS6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__PATA_DA_2 (_MX51_PAD_NANDF_CS6__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__SD4_DAT3 (_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN (_MX51_PAD_NANDF_CS7__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS7__GPIO3_23 (_MX51_PAD_NANDF_CS7__GPIO3_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS7__NANDF_CS7 (_MX51_PAD_NANDF_CS7__NANDF_CS7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS7__SD3_CLK (_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 (_MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK (_MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 (_MX51_PAD_NANDF_RDY_INT__GPIO3_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT (_MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD (_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI (_MX51_PAD_NANDF_D15__ECSPI2_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__GPIO3_25 (_MX51_PAD_NANDF_D15__GPIO3_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__NANDF_D15 (_MX51_PAD_NANDF_D15__NANDF_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__PATA_DATA15 (_MX51_PAD_NANDF_D15__PATA_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__SD3_DAT7 (_MX51_PAD_NANDF_D15__SD3_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3 (_MX51_PAD_NANDF_D14__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__GPIO3_26 (_MX51_PAD_NANDF_D14__GPIO3_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__NANDF_D14 (_MX51_PAD_NANDF_D14__NANDF_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__PATA_DATA14 (_MX51_PAD_NANDF_D14__PATA_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__SD3_DAT6 (_MX51_PAD_NANDF_D14__SD3_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2 (_MX51_PAD_NANDF_D13__ECSPI2_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__GPIO3_27 (_MX51_PAD_NANDF_D13__GPIO3_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__NANDF_D13 (_MX51_PAD_NANDF_D13__NANDF_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__PATA_DATA13 (_MX51_PAD_NANDF_D13__PATA_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__SD3_DAT5 (_MX51_PAD_NANDF_D13__SD3_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1 (_MX51_PAD_NANDF_D12__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__GPIO3_28 (_MX51_PAD_NANDF_D12__GPIO3_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__NANDF_D12 (_MX51_PAD_NANDF_D12__NANDF_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__PATA_DATA12 (_MX51_PAD_NANDF_D12__PATA_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__SD3_DAT4 (_MX51_PAD_NANDF_D12__SD3_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__FEC_RX_DV (_MX51_PAD_NANDF_D11__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__GPIO3_29 (_MX51_PAD_NANDF_D11__GPIO3_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__NANDF_D11 (_MX51_PAD_NANDF_D11__NANDF_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__PATA_DATA11 (_MX51_PAD_NANDF_D11__PATA_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__SD3_DATA3 (_MX51_PAD_NANDF_D11__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__GPIO3_30 (_MX51_PAD_NANDF_D10__GPIO3_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__NANDF_D10 (_MX51_PAD_NANDF_D10__NANDF_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__PATA_DATA10 (_MX51_PAD_NANDF_D10__PATA_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__SD3_DATA2 (_MX51_PAD_NANDF_D10__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__FEC_RDATA0 (_MX51_PAD_NANDF_D9__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_NANDF_D9__GPIO3_31 (_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__NANDF_D9 (_MX51_PAD_NANDF_D9__NANDF_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__PATA_DATA9 (_MX51_PAD_NANDF_D9__PATA_DATA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__SD3_DATA1 (_MX51_PAD_NANDF_D9__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__FEC_TDATA0 (_MX51_PAD_NANDF_D8__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_D8__GPIO4_0 (_MX51_PAD_NANDF_D8__GPIO4_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__NANDF_D8 (_MX51_PAD_NANDF_D8__NANDF_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__PATA_DATA8 (_MX51_PAD_NANDF_D8__PATA_DATA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__SD3_DATA0 (_MX51_PAD_NANDF_D8__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__GPIO4_1 (_MX51_PAD_NANDF_D7__GPIO4_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__NANDF_D7 (_MX51_PAD_NANDF_D7__NANDF_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__PATA_DATA7 (_MX51_PAD_NANDF_D7__PATA_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__USBH3_DATA0 (_MX51_PAD_NANDF_D7__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__GPIO4_2 (_MX51_PAD_NANDF_D6__GPIO4_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__NANDF_D6 (_MX51_PAD_NANDF_D6__NANDF_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__PATA_DATA6 (_MX51_PAD_NANDF_D6__PATA_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__SD4_LCTL (_MX51_PAD_NANDF_D6__SD4_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__USBH3_DATA1 (_MX51_PAD_NANDF_D6__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__GPIO4_3 (_MX51_PAD_NANDF_D5__GPIO4_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__NANDF_D5 (_MX51_PAD_NANDF_D5__NANDF_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__PATA_DATA5 (_MX51_PAD_NANDF_D5__PATA_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__SD4_WP (_MX51_PAD_NANDF_D5__SD4_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__USBH3_DATA2 (_MX51_PAD_NANDF_D5__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__GPIO4_4 (_MX51_PAD_NANDF_D4__GPIO4_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__NANDF_D4 (_MX51_PAD_NANDF_D4__NANDF_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__PATA_DATA4 (_MX51_PAD_NANDF_D4__PATA_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__SD4_CD (_MX51_PAD_NANDF_D4__SD4_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__USBH3_DATA3 (_MX51_PAD_NANDF_D4__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__GPIO4_5 (_MX51_PAD_NANDF_D3__GPIO4_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__NANDF_D3 (_MX51_PAD_NANDF_D3__NANDF_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__PATA_DATA3 (_MX51_PAD_NANDF_D3__PATA_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__SD4_DAT4 (_MX51_PAD_NANDF_D3__SD4_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__USBH3_DATA4 (_MX51_PAD_NANDF_D3__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__GPIO4_6 (_MX51_PAD_NANDF_D2__GPIO4_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__NANDF_D2 (_MX51_PAD_NANDF_D2__NANDF_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__PATA_DATA2 (_MX51_PAD_NANDF_D2__PATA_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__SD4_DAT5 (_MX51_PAD_NANDF_D2__SD4_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__USBH3_DATA5 (_MX51_PAD_NANDF_D2__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__GPIO4_7 (_MX51_PAD_NANDF_D1__GPIO4_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__NANDF_D1 (_MX51_PAD_NANDF_D1__NANDF_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__PATA_DATA1 (_MX51_PAD_NANDF_D1__PATA_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__SD4_DAT6 (_MX51_PAD_NANDF_D1__SD4_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__USBH3_DATA6 (_MX51_PAD_NANDF_D1__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__GPIO4_8 (_MX51_PAD_NANDF_D0__GPIO4_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__NANDF_D0 (_MX51_PAD_NANDF_D0__NANDF_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__PATA_DATA0 (_MX51_PAD_NANDF_D0__PATA_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__SD4_DAT7 (_MX51_PAD_NANDF_D0__SD4_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__USBH3_DATA7 (_MX51_PAD_NANDF_D0__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D8__CSI1_D8 (_MX51_PAD_CSI1_D8__CSI1_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D8__GPIO3_12 (_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_D9__CSI1_D9 (_MX51_PAD_CSI1_D9__CSI1_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D9__GPIO3_13 (_MX51_PAD_CSI1_D9__GPIO3_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_D10__CSI1_D10 (_MX51_PAD_CSI1_D10__CSI1_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D11__CSI1_D11 (_MX51_PAD_CSI1_D11__CSI1_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D12__CSI1_D12 (_MX51_PAD_CSI1_D12__CSI1_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D13__CSI1_D13 (_MX51_PAD_CSI1_D13__CSI1_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D14__CSI1_D14 (_MX51_PAD_CSI1_D14__CSI1_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D15__CSI1_D15 (_MX51_PAD_CSI1_D15__CSI1_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D16__CSI1_D16 (_MX51_PAD_CSI1_D16__CSI1_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D17__CSI1_D17 (_MX51_PAD_CSI1_D17__CSI1_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D18__CSI1_D18 (_MX51_PAD_CSI1_D18__CSI1_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D19__CSI1_D19 (_MX51_PAD_CSI1_D19__CSI1_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC (_MX51_PAD_CSI1_VSYNC__CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14 (_MX51_PAD_CSI1_VSYNC__GPIO3_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC (_MX51_PAD_CSI1_HSYNC__CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15 (_MX51_PAD_CSI1_HSYNC__GPIO3_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK (_MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK (_MX51_PAD_CSI1_MCLK__CSI1_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D12__CSI2_D12 (_MX51_PAD_CSI2_D12__CSI2_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D12__GPIO4_9 (_MX51_PAD_CSI2_D12__GPIO4_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_D13__CSI2_D13 (_MX51_PAD_CSI2_D13__CSI2_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D13__GPIO4_10 (_MX51_PAD_CSI2_D13__GPIO4_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_D14__CSI2_D14 (_MX51_PAD_CSI2_D14__CSI2_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D15__CSI2_D15 (_MX51_PAD_CSI2_D15__CSI2_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D16__CSI2_D16 (_MX51_PAD_CSI2_D16__CSI2_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D17__CSI2_D17 (_MX51_PAD_CSI2_D17__CSI2_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D18__CSI2_D18 (_MX51_PAD_CSI2_D18__CSI2_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D18__GPIO4_11 (_MX51_PAD_CSI2_D18__GPIO4_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_D19__CSI2_D19 (_MX51_PAD_CSI2_D19__CSI2_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D19__GPIO4_12 (_MX51_PAD_CSI2_D19__GPIO4_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC (_MX51_PAD_CSI2_VSYNC__CSI2_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13 (_MX51_PAD_CSI2_VSYNC__GPIO4_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC (_MX51_PAD_CSI2_HSYNC__CSI2_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14 (_MX51_PAD_CSI2_HSYNC__GPIO4_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK (_MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 (_MX51_PAD_CSI2_PIXCLK__GPIO4_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_I2C1_CLK__GPIO4_16 (_MX51_PAD_I2C1_CLK__GPIO4_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_I2C1_CLK__I2C1_CLK (_MX51_PAD_I2C1_CLK__I2C1_CLK | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_I2C1_DAT__GPIO4_17 (_MX51_PAD_I2C1_DAT__GPIO4_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_I2C1_DAT__I2C1_DAT (_MX51_PAD_I2C1_DAT__I2C1_DAT | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD (_MX51_PAD_AUD3_BB_TXD__AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 (_MX51_PAD_AUD3_BB_TXD__GPIO4_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD (_MX51_PAD_AUD3_BB_RXD__AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 (_MX51_PAD_AUD3_BB_RXD__GPIO4_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD (_MX51_PAD_AUD3_BB_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC (_MX51_PAD_AUD3_BB_CK__AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20 (_MX51_PAD_AUD3_BB_CK__GPIO4_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS (_MX51_PAD_AUD3_BB_FS__AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21 (_MX51_PAD_AUD3_BB_FS__GPIO4_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD (_MX51_PAD_AUD3_BB_FS__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI (_MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22 (_MX51_PAD_CSPI1_MOSI__GPIO4_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA (_MX51_PAD_CSPI1_MOSI__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD (_MX51_PAD_CSPI1_MISO__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO (_MX51_PAD_CSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_MISO__GPIO4_23 (_MX51_PAD_CSPI1_MISO__GPIO4_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC (_MX51_PAD_CSPI1_SS0__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 (_MX51_PAD_CSPI1_SS0__ECSPI1_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS0__GPIO4_24 (_MX51_PAD_CSPI1_SS0__GPIO4_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD (_MX51_PAD_CSPI1_SS1__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 (_MX51_PAD_CSPI1_SS1__ECSPI1_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS1__GPIO4_25 (_MX51_PAD_CSPI1_SS1__GPIO4_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS (_MX51_PAD_CSPI1_RDY__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY (_MX51_PAD_CSPI1_RDY__ECSPI1_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_RDY__GPIO4_26 (_MX51_PAD_CSPI1_RDY__GPIO4_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK (_MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27 (_MX51_PAD_CSPI1_SCLK__GPIO4_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL (_MX51_PAD_CSPI1_SCLK__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_UART1_RXD__GPIO4_28 (_MX51_PAD_UART1_RXD__GPIO4_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_RXD__UART1_RXD (_MX51_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART1_TXD__GPIO4_29 (_MX51_PAD_UART1_TXD__GPIO4_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_TXD__PWM2_PWMO (_MX51_PAD_UART1_TXD__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART1_TXD__UART1_TXD (_MX51_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART1_RTS__GPIO4_30 (_MX51_PAD_UART1_RTS__GPIO4_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_RTS__UART1_RTS (_MX51_PAD_UART1_RTS__UART1_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART1_CTS__GPIO4_31 (_MX51_PAD_UART1_CTS__GPIO4_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_CTS__UART1_CTS (_MX51_PAD_UART1_CTS__UART1_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART2_RXD__FIRI_TXD (_MX51_PAD_UART2_RXD__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART2_RXD__GPIO1_20 (_MX51_PAD_UART2_RXD__GPIO1_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART2_RXD__UART2_RXD (_MX51_PAD_UART2_RXD__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART2_TXD__FIRI_RXD (_MX51_PAD_UART2_TXD__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART2_TXD__GPIO1_21 (_MX51_PAD_UART2_TXD__GPIO1_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART2_TXD__UART2_TXD (_MX51_PAD_UART2_TXD__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__CSI1_D0 (_MX51_PAD_UART3_RXD__CSI1_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__GPIO1_22 (_MX51_PAD_UART3_RXD__GPIO1_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__UART1_DTR (_MX51_PAD_UART3_RXD__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__UART3_RXD (_MX51_PAD_UART3_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__CSI1_D1 (_MX51_PAD_UART3_TXD__CSI1_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__GPIO1_23 (_MX51_PAD_UART3_TXD__GPIO1_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__UART1_DSR (_MX51_PAD_UART3_TXD__UART1_DSR | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__UART3_TXD (_MX51_PAD_UART3_TXD__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_OWIRE_LINE__GPIO1_24 (_MX51_PAD_OWIRE_LINE__GPIO1_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE (_MX51_PAD_OWIRE_LINE__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT (_MX51_PAD_OWIRE_LINE__SPDIF_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW0__KEY_ROW0 (_MX51_PAD_KEY_ROW0__KEY_ROW0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW1__KEY_ROW1 (_MX51_PAD_KEY_ROW1__KEY_ROW1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW2__KEY_ROW2 (_MX51_PAD_KEY_ROW2__KEY_ROW2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW3__KEY_ROW3 (_MX51_PAD_KEY_ROW3__KEY_ROW3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL0__KEY_COL0 (_MX51_PAD_KEY_COL0__KEY_COL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL0__PLL1_BYP (_MX51_PAD_KEY_COL0__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL1__KEY_COL1 (_MX51_PAD_KEY_COL1__KEY_COL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL1__PLL2_BYP (_MX51_PAD_KEY_COL1__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL2__KEY_COL2 (_MX51_PAD_KEY_COL2__KEY_COL2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL2__PLL3_BYP (_MX51_PAD_KEY_COL2__PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL3__KEY_COL3 (_MX51_PAD_KEY_COL3__KEY_COL3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__I2C2_SCL (_MX51_PAD_KEY_COL4__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__KEY_COL4 (_MX51_PAD_KEY_COL4__KEY_COL4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1 (_MX51_PAD_KEY_COL4__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__UART1_RI (_MX51_PAD_KEY_COL4__UART1_RI | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__UART3_RTS (_MX51_PAD_KEY_COL4__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__I2C2_SDA (_MX51_PAD_KEY_COL5__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__KEY_COL5 (_MX51_PAD_KEY_COL5__KEY_COL5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__UART1_DCD (_MX51_PAD_KEY_COL5__UART1_DCD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__UART3_CTS (_MX51_PAD_KEY_COL5__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK (_MX51_PAD_USBH1_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__GPIO1_25 (_MX51_PAD_USBH1_CLK__GPIO1_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__I2C2_SCL (_MX51_PAD_USBH1_CLK__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__USBH1_CLK (_MX51_PAD_USBH1_CLK__USBH1_CLK | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI (_MX51_PAD_USBH1_DIR__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__GPIO1_26 (_MX51_PAD_USBH1_DIR__GPIO1_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__I2C2_SDA (_MX51_PAD_USBH1_DIR__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__USBH1_DIR (_MX51_PAD_USBH1_DIR__USBH1_DIR | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__CSPI_RDY (_MX51_PAD_USBH1_STP__CSPI_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__GPIO1_27 (_MX51_PAD_USBH1_STP__GPIO1_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__UART3_RXD (_MX51_PAD_USBH1_STP__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__USBH1_STP (_MX51_PAD_USBH1_STP__USBH1_STP | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__CSPI_MISO (_MX51_PAD_USBH1_NXT__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__GPIO1_28 (_MX51_PAD_USBH1_NXT__GPIO1_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__UART3_TXD (_MX51_PAD_USBH1_NXT__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__USBH1_NXT (_MX51_PAD_USBH1_NXT__USBH1_NXT | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA0__GPIO1_11 (_MX51_PAD_USBH1_DATA0__GPIO1_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA0__UART2_CTS (_MX51_PAD_USBH1_DATA0__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 (_MX51_PAD_USBH1_DATA0__USBH1_DATA0 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA1__GPIO1_12 (_MX51_PAD_USBH1_DATA1__GPIO1_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA1__UART2_RXD (_MX51_PAD_USBH1_DATA1__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 (_MX51_PAD_USBH1_DATA1__USBH1_DATA1 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA2__GPIO1_13 (_MX51_PAD_USBH1_DATA2__GPIO1_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA2__UART2_TXD (_MX51_PAD_USBH1_DATA2__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 (_MX51_PAD_USBH1_DATA2__USBH1_DATA2 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA3__GPIO1_14 (_MX51_PAD_USBH1_DATA3__GPIO1_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA3__UART2_RTS (_MX51_PAD_USBH1_DATA3__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 (_MX51_PAD_USBH1_DATA3__USBH1_DATA3 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0 (_MX51_PAD_USBH1_DATA4__CSPI_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA4__GPIO1_15 (_MX51_PAD_USBH1_DATA4__GPIO1_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 (_MX51_PAD_USBH1_DATA4__USBH1_DATA4 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1 (_MX51_PAD_USBH1_DATA5__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA5__GPIO1_16 (_MX51_PAD_USBH1_DATA5__GPIO1_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 (_MX51_PAD_USBH1_DATA5__USBH1_DATA5 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3 (_MX51_PAD_USBH1_DATA6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA6__GPIO1_17 (_MX51_PAD_USBH1_DATA6__GPIO1_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 (_MX51_PAD_USBH1_DATA6__USBH1_DATA6 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI1_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__GPIO1_18 (_MX51_PAD_USBH1_DATA7__GPIO1_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 (_MX51_PAD_USBH1_DATA7__USBH1_DATA7 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_DI1_PIN11__DI1_PIN11 (_MX51_PAD_DI1_PIN11__DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 (_MX51_PAD_DI1_PIN11__ECSPI1_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_DI1_PIN11__GPIO3_0 (_MX51_PAD_DI1_PIN11__GPIO3_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN12__DI1_PIN12 (_MX51_PAD_DI1_PIN12__DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN12__GPIO3_1 (_MX51_PAD_DI1_PIN12__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN13__DI1_PIN13 (_MX51_PAD_DI1_PIN13__DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN13__GPIO3_2 (_MX51_PAD_DI1_PIN13__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS (_MX51_PAD_DI1_D0_CS__DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D0_CS__GPIO3_3 (_MX51_PAD_DI1_D0_CS__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS (_MX51_PAD_DI1_D1_CS__DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 (_MX51_PAD_DI1_D1_CS__DISP1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 (_MX51_PAD_DI1_D1_CS__DISP1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__GPIO3_4 (_MX51_PAD_DI1_D1_CS__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 (_MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN (_MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 (_MX51_PAD_DISPB2_SER_DIN__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 (_MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO (_MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 (_MX51_PAD_DISPB2_SER_DIO__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK (_MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 (_MX51_PAD_DISPB2_SER_CLK__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK (_MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 (_MX51_PAD_DISPB2_SER_RS__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 (_MX51_PAD_DISP1_DAT0__DISP1_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 (_MX51_PAD_DISP1_DAT1__DISP1_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 (_MX51_PAD_DISP1_DAT2__DISP1_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 (_MX51_PAD_DISP1_DAT3__DISP1_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 (_MX51_PAD_DISP1_DAT4__DISP1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 (_MX51_PAD_DISP1_DAT5__DISP1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC (_MX51_PAD_DISP1_DAT6__BOOT_USB_SRC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 (_MX51_PAD_DISP1_DAT6__DISP1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG (_MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 (_MX51_PAD_DISP1_DAT7__DISP1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 (_MX51_PAD_DISP1_DAT8__BOOT_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 (_MX51_PAD_DISP1_DAT8__DISP1_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 (_MX51_PAD_DISP1_DAT9__BOOT_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 (_MX51_PAD_DISP1_DAT9__DISP1_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE (_MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 (_MX51_PAD_DISP1_DAT10__DISP1_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 (_MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 (_MX51_PAD_DISP1_DAT11__DISP1_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL (_MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 (_MX51_PAD_DISP1_DAT12__DISP1_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 (_MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 (_MX51_PAD_DISP1_DAT13__DISP1_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 (_MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 (_MX51_PAD_DISP1_DAT14__DISP1_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH (_MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 (_MX51_PAD_DISP1_DAT15__DISP1_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 (_MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 (_MX51_PAD_DISP1_DAT16__DISP1_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 (_MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 (_MX51_PAD_DISP1_DAT17__DISP1_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 (_MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 (_MX51_PAD_DISP1_DAT18__DISP1_DAT18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 (_MX51_PAD_DISP1_DAT18__DISP2_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 (_MX51_PAD_DISP1_DAT18__DISP2_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 (_MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 (_MX51_PAD_DISP1_DAT19__DISP1_DAT19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 (_MX51_PAD_DISP1_DAT19__DISP2_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 (_MX51_PAD_DISP1_DAT19__DISP2_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 (_MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 (_MX51_PAD_DISP1_DAT20__DISP1_DAT20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 (_MX51_PAD_DISP1_DAT20__DISP2_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 (_MX51_PAD_DISP1_DAT20__DISP2_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 (_MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 (_MX51_PAD_DISP1_DAT21__DISP1_DAT21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 (_MX51_PAD_DISP1_DAT21__DISP2_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 (_MX51_PAD_DISP1_DAT21__DISP2_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 (_MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 (_MX51_PAD_DISP1_DAT22__DISP1_DAT22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS (_MX51_PAD_DISP1_DAT22__DISP2_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 (_MX51_PAD_DISP1_DAT22__DISP2_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 (_MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 (_MX51_PAD_DISP1_DAT23__DISP1_DAT23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS (_MX51_PAD_DISP1_DAT23__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 (_MX51_PAD_DISP1_DAT23__DISP2_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS (_MX51_PAD_DISP1_DAT23__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN3__DI1_PIN3 (_MX51_PAD_DI1_PIN3__DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN2__DI1_PIN2 (_MX51_PAD_DI1_PIN2__DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK (_MX51_PAD_DI_GP2__DISP1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP2__DISP2_WAIT (_MX51_PAD_DI_GP2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN (_MX51_PAD_DI_GP3__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO (_MX51_PAD_DI_GP3__DISP1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP3__FEC_TX_ER (_MX51_PAD_DI_GP3__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN (_MX51_PAD_DI2_PIN4__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN4__DI2_PIN4 (_MX51_PAD_DI2_PIN4__DI2_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN4__FEC_CRS (_MX51_PAD_DI2_PIN4__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN2__DI2_PIN2 (_MX51_PAD_DI2_PIN2__DI2_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN2__FEC_MDC (_MX51_PAD_DI2_PIN2__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DI2_PIN3__DI2_PIN3 (_MX51_PAD_DI2_PIN3__DI2_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN3__FEC_MDIO (_MX51_PAD_DI2_PIN3__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK (_MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 (_MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__DI2_PIN15 (_MX51_PAD_DI_GP4__DI2_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN (_MX51_PAD_DI_GP4__DISP1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__DISP2_PIN1 (_MX51_PAD_DI_GP4__DISP2_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__FEC_RDATA2 (_MX51_PAD_DI_GP4__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 (_MX51_PAD_DISP2_DAT0__DISP2_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 (_MX51_PAD_DISP2_DAT0__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__KEY_COL6 (_MX51_PAD_DISP2_DAT0__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__UART3_RXD (_MX51_PAD_DISP2_DAT0__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK (_MX51_PAD_DISP2_DAT0__USBH3_CLK | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 (_MX51_PAD_DISP2_DAT1__DISP2_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER (_MX51_PAD_DISP2_DAT1__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__KEY_COL7 (_MX51_PAD_DISP2_DAT1__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__UART3_TXD (_MX51_PAD_DISP2_DAT1__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR (_MX51_PAD_DISP2_DAT1__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 (_MX51_PAD_DISP2_DAT2__DISP2_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 (_MX51_PAD_DISP2_DAT3__DISP2_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 (_MX51_PAD_DISP2_DAT4__DISP2_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 (_MX51_PAD_DISP2_DAT5__DISP2_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 (_MX51_PAD_DISP2_DAT6__DISP2_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 (_MX51_PAD_DISP2_DAT6__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT6__GPIO1_19 (_MX51_PAD_DISP2_DAT6__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4 (_MX51_PAD_DISP2_DAT6__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__USBH3_STP (_MX51_PAD_DISP2_DAT6__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 (_MX51_PAD_DISP2_DAT7__DISP2_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 (_MX51_PAD_DISP2_DAT7__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT7__GPIO1_29 (_MX51_PAD_DISP2_DAT7__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5 (_MX51_PAD_DISP2_DAT7__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT (_MX51_PAD_DISP2_DAT7__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 (_MX51_PAD_DISP2_DAT8__DISP2_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 (_MX51_PAD_DISP2_DAT8__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT8__GPIO1_30 (_MX51_PAD_DISP2_DAT8__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6 (_MX51_PAD_DISP2_DAT8__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 (_MX51_PAD_DISP2_DAT8__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC (_MX51_PAD_DISP2_DAT9__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 (_MX51_PAD_DISP2_DAT9__DISP2_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN (_MX51_PAD_DISP2_DAT9__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT9__GPIO1_31 (_MX51_PAD_DISP2_DAT9__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 (_MX51_PAD_DISP2_DAT9__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 (_MX51_PAD_DISP2_DAT10__DISP2_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS (_MX51_PAD_DISP2_DAT10__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__FEC_COL (_MX51_PAD_DISP2_DAT10__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7 (_MX51_PAD_DISP2_DAT10__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 (_MX51_PAD_DISP2_DAT10__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD (_MX51_PAD_DISP2_DAT11__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 (_MX51_PAD_DISP2_DAT11__DISP2_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK (_MX51_PAD_DISP2_DAT11__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__GPIO1_10 (_MX51_PAD_DISP2_DAT11__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 (_MX51_PAD_DISP2_DAT11__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD (_MX51_PAD_DISP2_DAT12__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 (_MX51_PAD_DISP2_DAT12__DISP2_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV (_MX51_PAD_DISP2_DAT12__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 (_MX51_PAD_DISP2_DAT12__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC (_MX51_PAD_DISP2_DAT13__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 (_MX51_PAD_DISP2_DAT13__DISP2_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK (_MX51_PAD_DISP2_DAT13__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 (_MX51_PAD_DISP2_DAT13__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS (_MX51_PAD_DISP2_DAT14__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 (_MX51_PAD_DISP2_DAT14__DISP2_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 (_MX51_PAD_DISP2_DAT14__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 (_MX51_PAD_DISP2_DAT14__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS (_MX51_PAD_DISP2_DAT15__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS (_MX51_PAD_DISP2_DAT15__DISP1_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 (_MX51_PAD_DISP2_DAT15__DISP2_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 (_MX51_PAD_DISP2_DAT15__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 (_MX51_PAD_DISP2_DAT15__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CMD__AUD5_RXFS (_MX51_PAD_SD1_CMD__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CMD__CSPI_MOSI (_MX51_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CMD__SD1_CMD (_MX51_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD1_CLK__AUD5_RXC (_MX51_PAD_SD1_CLK__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CLK__CSPI_SCLK (_MX51_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CLK__SD1_CLK (_MX51_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_SD1_DATA0__AUD5_TXD (_MX51_PAD_SD1_DATA0__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA0__CSPI_MISO (_MX51_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD1_DATA0__SD1_DATA0 (_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_EIM_DA0__EIM_DA0 (_MX51_PAD_EIM_DA0__EIM_DA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA1__EIM_DA1 (_MX51_PAD_EIM_DA1__EIM_DA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA2__EIM_DA2 (_MX51_PAD_EIM_DA2__EIM_DA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA3__EIM_DA3 (_MX51_PAD_EIM_DA3__EIM_DA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA1__AUD5_RXD (_MX51_PAD_SD1_DATA1__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA1__SD1_DATA1 (_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_EIM_DA4__EIM_DA4 (_MX51_PAD_EIM_DA4__EIM_DA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA5__EIM_DA5 (_MX51_PAD_EIM_DA5__EIM_DA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA6__EIM_DA6 (_MX51_PAD_EIM_DA6__EIM_DA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA7__EIM_DA7 (_MX51_PAD_EIM_DA7__EIM_DA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA2__AUD5_TXC (_MX51_PAD_SD1_DATA2__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA2__SD1_DATA2 (_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_EIM_DA10__EIM_DA10 (_MX51_PAD_EIM_DA10__EIM_DA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA11__EIM_DA11 (_MX51_PAD_EIM_DA11__EIM_DA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA8__EIM_DA8 (_MX51_PAD_EIM_DA8__EIM_DA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA9__EIM_DA9 (_MX51_PAD_EIM_DA9__EIM_DA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS (_MX51_PAD_SD1_DATA3__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA3__CSPI_SS1 (_MX51_PAD_SD1_DATA3__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD1_DATA3__SD1_DATA3 (_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_GPIO1_0__CSPI_SS2 (_MX51_PAD_GPIO1_0__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_GPIO1_0__GPIO1_0 (_MX51_PAD_GPIO1_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_0__SD1_CD (_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_GPIO1_1__CSPI_MISO (_MX51_PAD_GPIO1_1__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_GPIO1_1__GPIO1_1 (_MX51_PAD_GPIO1_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_1__SD1_WP (_MX51_PAD_GPIO1_1__SD1_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_EIM_DA12__EIM_DA12 (_MX51_PAD_EIM_DA12__EIM_DA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA13__EIM_DA13 (_MX51_PAD_EIM_DA13__EIM_DA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA14__EIM_DA14 (_MX51_PAD_EIM_DA14__EIM_DA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA15__EIM_DA15 (_MX51_PAD_EIM_DA15__EIM_DA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_CMD__CSPI_MOSI (_MX51_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_CMD__I2C1_SCL (_MX51_PAD_SD2_CMD__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_SD2_CMD__SD2_CMD (_MX51_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_CLK__CSPI_SCLK (_MX51_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_CLK__I2C1_SDA (_MX51_PAD_SD2_CLK__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_SD2_CLK__SD2_CLK (_MX51_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_SD2_DATA0__CSPI_MISO (_MX51_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA0__SD1_DAT4 (_MX51_PAD_SD2_DATA0__SD1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA0__SD2_DATA0 (_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA1__SD1_DAT5 (_MX51_PAD_SD2_DATA1__SD1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA1__SD2_DATA1 (_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP (_MX51_PAD_SD2_DATA1__USBH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA2__SD1_DAT6 (_MX51_PAD_SD2_DATA2__SD1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA2__SD2_DATA2 (_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM (_MX51_PAD_SD2_DATA2__USBH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA3__CSPI_SS2 (_MX51_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA3__SD1_DAT7 (_MX51_PAD_SD2_DATA3__SD1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA3__SD2_DATA3 (_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__CCM_OUT_2 (_MX51_PAD_GPIO1_2__CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__GPIO1_2 (_MX51_PAD_GPIO1_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__I2C2_SCL (_MX51_PAD_GPIO1_2__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__PLL1_BYP (_MX51_PAD_GPIO1_2__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__PWM1_PWMO (_MX51_PAD_GPIO1_2__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__GPIO1_3 (_MX51_PAD_GPIO1_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__I2C2_SDA (_MX51_PAD_GPIO1_3__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__PLL2_BYP (_MX51_PAD_GPIO1_3__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__PWM2_PWMO (_MX51_PAD_GPIO1_3__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ (_MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B (_MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK (_MX51_PAD_GPIO1_4__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__EIM_RDY (_MX51_PAD_GPIO1_4__EIM_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__GPIO1_4 (_MX51_PAD_GPIO1_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B (_MX51_PAD_GPIO1_4__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__CSI2_MCLK (_MX51_PAD_GPIO1_5__CSI2_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__DISP2_PIN16 (_MX51_PAD_GPIO1_5__DISP2_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__GPIO1_5 (_MX51_PAD_GPIO1_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B (_MX51_PAD_GPIO1_5__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_6__DISP2_PIN17 (_MX51_PAD_GPIO1_6__DISP2_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_6__GPIO1_6 (_MX51_PAD_GPIO1_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_6__REF_EN_B (_MX51_PAD_GPIO1_6__REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__CCM_OUT_0 (_MX51_PAD_GPIO1_7__CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__GPIO1_7 (_MX51_PAD_GPIO1_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__SD2_WP (_MX51_PAD_GPIO1_7__SD2_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1 (_MX51_PAD_GPIO1_7__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN (_MX51_PAD_GPIO1_8__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__GPIO1_8 (_MX51_PAD_GPIO1_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__SD2_CD (_MX51_PAD_GPIO1_8__SD2_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__USBH3_PWR (_MX51_PAD_GPIO1_8__USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__CCM_OUT_1 (_MX51_PAD_GPIO1_9__CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS (_MX51_PAD_GPIO1_9__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS (_MX51_PAD_GPIO1_9__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__GPIO1_9 (_MX51_PAD_GPIO1_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__SD2_LCTL (_MX51_PAD_GPIO1_9__SD2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__USBH3_OC (_MX51_PAD_GPIO1_9__USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0x0d4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0x0d4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0x0d8, 6, 0x8dc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0x0d8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0x0d8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0x0dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0x0dc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0x0e4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0x0e8, 6, 0x8d8, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0x0e8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0x0e8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0x0ec, 6, 0x8d4, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0x0ec, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0x0ec, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0x0f0, 6, 0x8e4, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0x0f0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0x0f0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0x0f4, 6, 0x8e8, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0x0f4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0x0f4, 4, 0x904, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0x0f4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0x0f4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0x0f8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0x0fc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0x0fc, 1, 0x978, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x93c, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x984, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x940, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x988, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x98c, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x990, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x944, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x930, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x994, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x948, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x91c, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x914, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0xa24, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0xa1c, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x928, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x934, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x930, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x948, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x940, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x9fc, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0xa00, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0xa04, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0xa08, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0xa0c, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0xa10, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0xa14, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0xa18, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x998, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x9f4, 2, MX51_UART_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x9b4, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x8c4, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x8cc, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x8c8, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x8d0, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x9b0, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x90c, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x910, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x9b8, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x9f0, 4, MX51_UART_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x9bc, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x914, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x9b8, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x91c, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x9bc, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x9f4, 6, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x918, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x9ec, 4, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x9e8, 5, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x920, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x928, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x934, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x9c4, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x9c4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x990, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x994, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x9c0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x99c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x950, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x954, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x95c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x9c0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x960, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x964, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x9c8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x9f4, 8, MX51_UART_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x9f8, 1, MX51_UART_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x970, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x9cc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0xa1c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x94c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x9dc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0xa04, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x96c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0xa0c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x8fc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x974, 1, MX51_PAD_CTRL_4)
+#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0xa10, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x900, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x958, 1, MX51_PAD_CTRL_4)
+#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0xa14, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x8f8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0xa18, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x91c, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x914, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x8d8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x918, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(__NA_, 0x01c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(__NA_, 0x020, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(__NA_, 0x024, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(__NA_, 0x028, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x8d4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(__NA_, 0x02c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(__NA_, 0x030, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(__NA_, 0x034, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(__NA_, 0x038, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x8e4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(__NA_, 0x044, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(__NA_, 0x048, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(__NA_, 0x03c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(__NA_, 0x040, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x8e8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x9b4, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x918, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 5408fd1..527f8fe 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -23,2359 +23,1197 @@
/* These 2 defines are for pins that may not have a mux register, but could
* have a pad setting register, and vice-versa. */
-#define NON_PAD_I 0x00
+#define __NA_ 0x00
#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
-#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \
- PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \
- | PAD_CTL_HYS)
-#define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
-#define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x20, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x20, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x20, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0)
-#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0)
-#define _MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x28, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x28, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x28, 2, 0x74C, 0, 0)
-#define _MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x28, 4, 0x890, 1, 0)
-#define _MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x28, 5, 0x7A4, 0, 0)
-#define _MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x28, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0)
-#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0)
-#define _MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0)
-#define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x30, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x30, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x30, 2, 0x748, 0, 0)
-#define _MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x30, 4, 0x898, 1, 0)
-#define _MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x30, 5, 0x7A8, 0, 0)
-#define _MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x30, 6, 0x800, 0, 0)
-#define _MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x30, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x34, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x34, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x34, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x34, 4, 0x804, 0, 0)
-#define _MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x34, 5, 0x7AC, 0, 0)
-#define _MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x34, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x34, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x38, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x38, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x38, 2, 0x760, 0, 0)
-#define _MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x38, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x38, 5, 0x7B0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x38, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x38, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x3C, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x3C, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x3C, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x3C, 3, 0x870, 0, 0)
-#define _MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x3C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, 0)
-#define _MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x3C, 5, 0x7B4, 0, 0)
-#define _MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x3C, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x3C, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x40, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x40, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x40, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x40, 3, 0x768, 0, 0)
-#define _MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x40, 4 | IOMUX_CONFIG_SION, 0x820, 0, 0)
-#define _MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x40, 5, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x40, 6, 0x77C, 0, 0)
-#define _MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x40, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x44, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x44, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x44, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x44, 3, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x44, 4, 0x894, 0, 0)
-#define _MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x44, 5, 0x89C, 0, 0)
-#define _MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x44, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x48, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0)
-#define _MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x4C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x4C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x4C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x4C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x4C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x50, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x50, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x50, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x50, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x50, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x50, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x54, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x54, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x54, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x54, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x54, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x54, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x58, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x58, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x58, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x58, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x58, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x58, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x5C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x5C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x5C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x5C, 3, 0x7FC, 0, 0)
-#define _MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x5C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x5C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x5C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x60, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x60, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x60, 2, 0x780, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x60, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x60, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x60, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x60, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x64, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x64, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x64, 2, 0x788, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x64, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x390, 0x64, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x64, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x64, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x68, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x68, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x68, 2, 0x784, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x68, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x68, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x68, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x68, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x6C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x6C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x6C, 2, 0x78C, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x6C, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x6C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x6C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x6C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x70, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x70, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x70, 2, 0x790, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x70, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x70, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x70, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x70, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x74, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x74, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x74, 2, 0x794, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x74, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x74, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x74, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x74, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x78, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x78, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x78, 2, 0x798, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x78, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x78, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x78, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x78, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x7C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x7C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x7C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x7C, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x7C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x7C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x7C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x80, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x80, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x80, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x80, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x80, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x80, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x80, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x84, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x84, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x84, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x84, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x84, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x84, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x84, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x88, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x88, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x88, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x3B4, 0x88, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x88, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x88, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x8C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x8C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x8C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x3B8, 0x8C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x8C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x8C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x90, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x90, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x90, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x3BC, 0x90, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x90, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x90, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x94, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x94, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x94, 3, 0x754, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 IOMUX_PAD(0x3C0, 0x94, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x94, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x94, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x98, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x98, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x98, 3, 0x750, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 IOMUX_PAD(0x3C4, 0x98, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x98, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x98, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x9C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x9C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x9C, 2, 0x7AC, 1, 0)
-#define _MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x9C, 3, 0x7C8, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 IOMUX_PAD(0x3C8, 0x9C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x9C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x9C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0xA0, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0xA0, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0xA0, 2, 0x7C0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0xA0, 3, 0x758, 1, 0)
-#define _MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0xA0, 4, 0x868, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 IOMUX_PAD(0x3CC, 0xA0, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0xA0, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0xA0, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0xA4, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0xA4, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0xA4, 2, 0x7BC, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0xA4, 3, 0x74C, 1, 0)
-#define _MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0xA4, 4, 0x86C, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 IOMUX_PAD(0x3D0, 0xA4, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0xA4, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0xA8, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0xA8, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0xA8, 2, 0x7C4, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0xA8, 3, 0x75C, 1, 0)
-#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0xA8, 4, 0x73C, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 IOMUX_PAD(0x3D4, 0xA8, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0xA8, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0xA8, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0xAC, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0xAC, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0xAC, 2, 0x7B8, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0xAC, 3, 0x748, 1, 0)
-#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0xAC, 4, 0x738, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 IOMUX_PAD(0x3D8, 0xAC, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0xAC, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0xAC, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0xB0, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0xB0, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0xB0, 2, 0x79C, 1, 0)
-#define _MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0xB0, 3, 0x740, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 IOMUX_PAD(0x3DC, 0xB0, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0xB0, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0xB0, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0xB4, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0xB4, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0xB4, 2, 0x7A4, 1, 0)
-#define _MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0xB4, 3, 0x734, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0xB4, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0xB4, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0xB4, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0xB8, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0xB8, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0xB8, 2, 0x7A0, 1, 0)
-#define _MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0xB8, 3, 0x744, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0xB8, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0xB8, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0xB8, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0xBC, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0xBC, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0xBC, 2, 0x7A8, 1, 0)
-#define _MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0xBC, 3, 0x730, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0xBC, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0xBC, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0xBC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0xC0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0xC0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0xC0, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0xC0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0xC4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0xC4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0xC4, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0xC4, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0xC4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0xC4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0xC8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0xC8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0xC8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0xC8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0xC8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0xCC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0xCC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0xCC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0xCC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0xCC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0xD0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0xD0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0xD0, 2, 0x840, 1, 0)
-#define _MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0xD0, 3, 0x79C, 2, 0)
-#define _MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0xD0, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0xD0, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0xD0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0xD0, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0xD4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0xD4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0xD4, 2, 0x84C, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0xD4, 3, 0x7A4, 2, 0)
-#define _MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0xD4, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0xD4, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0xD4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0xD4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0xD8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0xD8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0xD8, 2, 0x844, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0xD8, 3, 0x7A0, 2, 0)
-#define _MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0xD8, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0xD8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0xD8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0xD8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0xDC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0xDC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0xDC, 2, 0x850, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0xDC, 3, 0x7A8, 2, 0)
-#define _MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0xDC, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0xDC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0xDC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0xDC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0xE0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0xE0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0xE0, 2, 0x848, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0xE0, 3, 0x7B8, 1, 0)
-#define _MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0xE0, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0xE0, 5 | IOMUX_CONFIG_SION, 0x818, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0xE0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0xE0, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0xE4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0xE4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0xE4, 2, 0x854, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0xE4, 3, 0x7C0, 1, 0)
-#define _MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0xE4, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0xE4, 5 | IOMUX_CONFIG_SION, 0x814, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0xE4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0)
-#define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0xE8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0xE8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0xEC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0xEC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, 0)
-#define _MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0xEC, 3, 0x7C4, 1, 0)
-#define _MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0xEC, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0xEC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0xEC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0xF0, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0xF4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0xF4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0xF4, 2, 0x890, 3, 0)
-#define _MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0xF4, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0xF4, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0xF4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0xF8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0xFC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0xFC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0xFC, 2, 0x898, 3, 0)
-#define _MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0xFC, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0xFC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0xFC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0xFC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, 0)
-#define _MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, 0)
-#define _MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, 0)
-#define _MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, 0)
-#define _MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, 0)
-#define _MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0)
-#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, 0)
-#define _MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0)
-#define _MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0)
-#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, 0)
-#define _MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0)
-#define _MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0)
-#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, 0)
-#define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0)
-#define _MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0)
-#define _MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, 0)
-#define _MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, 0)
-#define _MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0)
-#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, 0)
-#define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0)
-#define _MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, 0)
-#define _MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, 0)
-#define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, 0)
-#define _MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, 0)
-#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0)
-#define _MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0)
-#define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0)
-#define _MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, 0)
-#define _MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, 0)
-#define _MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, 0)
-#define _MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, 0)
-#define _MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, 0)
-#define _MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0)
-#define _MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0)
-#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, 0)
-#define _MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, 0)
-#define _MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, 0)
-#define _MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, 0)
-#define _MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, 0)
-#define _MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, 0)
-#define _MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, 0)
-#define _MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, 0)
-#define _MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, 0)
-#define _MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, 0)
-#define _MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, 0)
-#define _MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, 0)
-#define _MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, 0)
-#define _MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, 0)
-#define _MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, 0)
-#define _MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, 0)
-#define _MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, 0)
-#define _MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(NON_PAD_I, 0x1EC, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(NON_PAD_I, 0x1F0, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(NON_PAD_I, 0x1F4, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(NON_PAD_I, 0x1F8, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(NON_PAD_I, 0x1FC, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(NON_PAD_I, 0x200, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(NON_PAD_I, 0x200, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(NON_PAD_I, 0x204, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(NON_PAD_I, 0x204, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(NON_PAD_I, 0x208, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(NON_PAD_I, 0x208, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(NON_PAD_I, 0x20C, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(NON_PAD_I, 0x20C, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(NON_PAD_I, 0x210, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(NON_PAD_I, 0x210, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, 0)
-#define _MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, 0)
-#define _MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, 0)
-#define _MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, 0)
-#define _MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, 0)
-#define _MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, 0)
-#define _MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, 0)
-#define _MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, 0)
-#define _MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, 0)
-#define _MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, 0)
-#define _MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, 0)
-#define _MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, 0)
-#define _MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, 0)
-#define _MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, 0)
-#define _MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, 0)
-#define _MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, 0)
-#define _MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, 0)
-#define _MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, 0)
-#define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, 0)
-#define _MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, 0)
-#define _MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, 0)
-#define _MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, 0)
-#define _MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, 0)
-#define _MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, 0)
-#define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, 0)
-#define _MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, 0)
-#define _MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, 0)
-#define _MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, 0)
-#define _MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, 0)
-#define _MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, IOMUX_CONFIG_SION, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, 0)
-#define _MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, 0)
-#define _MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, 0)
-#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, 0)
-#define _MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, 0)
-#define _MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, 0)
-#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, 0)
-#define _MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, 0)
-#define _MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, 0)
-#define _MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, 0)
-#define _MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, 0)
-#define _MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, 0)
-#define _MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, 0)
-#define _MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, 0)
-#define _MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, 0)
-#define _MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, 0)
-#define _MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, 0)
-#define _MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, 0)
-#define _MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, 0)
-#define _MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, 0)
-#define _MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, 0)
-#define _MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, 0)
-#define _MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, 0)
-#define _MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, 0)
-#define _MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, 0)
-#define _MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, 0)
-#define _MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, 0)
-#define _MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, 0)
-#define _MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, 0)
-#define _MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, 0)
-#define _MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, 0)
-#define _MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, 0)
-#define _MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, 0)
-#define _MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, 0)
-#define _MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, 0)
-#define _MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, 0)
-#define _MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, 0)
-#define _MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, 0)
-#define _MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, 0)
-#define _MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, 0)
-#define _MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, 0)
-#define _MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, 0)
-#define _MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, 0)
-#define _MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, 0)
-#define _MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, 0)
-#define _MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0)
-#define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0)
-#define _MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0)
-#define _MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0)
-#define _MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, 0)
-#define _MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, 0)
-#define _MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, 0)
-#define _MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, 0)
-#define _MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, 0)
-#define _MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, 0)
-#define _MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, 0)
-#define _MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, 0)
-#define _MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, 0)
-#define _MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, 0)
-#define _MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, 0)
-#define _MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, 0)
-#define _MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, 0)
-#define _MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, 0)
-#define _MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, 0x0, 0, 0)
-#define MX53_PAD_GPIO_19__KPP_COL_5 (_MX53_PAD_GPIO_19__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__GPIO4_5 (_MX53_PAD_GPIO_19__GPIO4_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__CCM_CLKO (_MX53_PAD_GPIO_19__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__SPDIF_OUT1 (_MX53_PAD_GPIO_19__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 (_MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__ECSPI1_RDY (_MX53_PAD_GPIO_19__ECSPI1_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__FEC_TDATA_3 (_MX53_PAD_GPIO_19__FEC_TDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT (_MX53_PAD_GPIO_19__SRC_INT_BOOT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__KPP_COL_0 (_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__GPIO4_6 (_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC (_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK (_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3 (_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST (_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0 (_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__GPIO4_7 (_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD (_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI (_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER (_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__KPP_COL_1 (_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__GPIO4_8 (_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS (_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO (_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK (_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY (_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1 (_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__GPIO4_9 (_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD (_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 (_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__FEC_COL (_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID (_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__KPP_COL_2 (_MX53_PAD_KEY_COL2__KPP_COL_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__GPIO4_10 (_MX53_PAD_KEY_COL2__GPIO4_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN (_MX53_PAD_KEY_COL2__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__FEC_MDIO (_MX53_PAD_KEY_COL2__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1 (_MX53_PAD_KEY_COL2__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2 (_MX53_PAD_KEY_COL2__FEC_RDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE (_MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2 (_MX53_PAD_KEY_ROW2__KPP_ROW_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__GPIO4_11 (_MX53_PAD_KEY_ROW2__GPIO4_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN (_MX53_PAD_KEY_ROW2__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__FEC_MDC (_MX53_PAD_KEY_ROW2__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 (_MX53_PAD_KEY_ROW2__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 (_MX53_PAD_KEY_ROW2__FEC_TDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR (_MX53_PAD_KEY_ROW2__USBPHY1_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__KPP_COL_3 (_MX53_PAD_KEY_COL3__KPP_COL_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3 (_MX53_PAD_KEY_ROW3__KPP_ROW_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__KPP_COL_4 (_MX53_PAD_KEY_COL4__KPP_COL_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__GPIO4_14 (_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__IPU_SISG_4 (_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC (_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 (_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4 (_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__GPIO4_15 (_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5 (_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR (_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID (_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK (_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 (_MX53_PAD_DI0_DISP_CLK__GPIO4_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR (_MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 (_MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 (_MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID (_MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 (_MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__GPIO4_17 (_MX53_PAD_DI0_PIN15__GPIO4_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC (_MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 (_MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 (_MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID (_MX53_PAD_DI0_PIN15__USBPHY1_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 (_MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__GPIO4_18 (_MX53_PAD_DI0_PIN2__GPIO4_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD (_MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 (_MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 (_MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION (_MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 (_MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__GPIO4_19 (_MX53_PAD_DI0_PIN3__GPIO4_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS (_MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 (_MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 (_MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG (_MX53_PAD_DI0_PIN3__USBPHY1_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 (_MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__GPIO4_20 (_MX53_PAD_DI0_PIN4__GPIO4_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD (_MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP (_MX53_PAD_DI0_PIN4__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD (_MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 (_MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT (_MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 (_MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__GPIO4_21 (_MX53_PAD_DISP0_DAT0__GPIO4_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK (_MX53_PAD_DISP0_DAT0__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 (_MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN (_MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 (_MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY (_MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 (_MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__GPIO4_22 (_MX53_PAD_DISP0_DAT1__GPIO4_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI (_MX53_PAD_DISP0_DAT1__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 (_MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL (_MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 (_MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID (_MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 (_MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__GPIO4_23 (_MX53_PAD_DISP0_DAT2__GPIO4_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO (_MX53_PAD_DISP0_DAT2__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 (_MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE (_MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 (_MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE (_MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 (_MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__GPIO4_24 (_MX53_PAD_DISP0_DAT3__GPIO4_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0 (_MX53_PAD_DISP0_DAT3__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 (_MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR (_MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 (_MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR (_MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 (_MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__GPIO4_25 (_MX53_PAD_DISP0_DAT4__GPIO4_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1 (_MX53_PAD_DISP0_DAT4__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 (_MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB (_MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 (_MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK (_MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 (_MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__GPIO4_26 (_MX53_PAD_DISP0_DAT5__GPIO4_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2 (_MX53_PAD_DISP0_DAT5__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 (_MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS (_MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 (_MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 (_MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 (_MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__GPIO4_27 (_MX53_PAD_DISP0_DAT6__GPIO4_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3 (_MX53_PAD_DISP0_DAT6__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 (_MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE (_MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 (_MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 (_MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 (_MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__GPIO4_28 (_MX53_PAD_DISP0_DAT7__GPIO4_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY (_MX53_PAD_DISP0_DAT7__CSPI_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 (_MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 (_MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 (_MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID (_MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 (_MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__GPIO4_29 (_MX53_PAD_DISP0_DAT8__GPIO4_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO (_MX53_PAD_DISP0_DAT8__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B (_MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 (_MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 (_MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID (_MX53_PAD_DISP0_DAT8__USBPHY2_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 (_MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__GPIO4_30 (_MX53_PAD_DISP0_DAT9__GPIO4_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO (_MX53_PAD_DISP0_DAT9__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B (_MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 (_MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 (_MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 (_MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 (_MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__GPIO4_31 (_MX53_PAD_DISP0_DAT10__GPIO4_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP (_MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 (_MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 (_MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 (_MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 (_MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__GPIO5_5 (_MX53_PAD_DISP0_DAT11__GPIO5_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT (_MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 (_MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 (_MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 (_MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 (_MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__GPIO5_6 (_MX53_PAD_DISP0_DAT12__GPIO5_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK (_MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 (_MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 (_MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 (_MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 (_MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__GPIO5_7 (_MX53_PAD_DISP0_DAT13__GPIO5_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS (_MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 (_MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 (_MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 (_MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 (_MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__GPIO5_8 (_MX53_PAD_DISP0_DAT14__GPIO5_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC (_MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 (_MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 (_MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 (_MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 (_MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__GPIO5_9 (_MX53_PAD_DISP0_DAT15__GPIO5_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 (_MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 (_MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 (_MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 (_MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__GPIO5_10 (_MX53_PAD_DISP0_DAT16__GPIO5_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI (_MX53_PAD_DISP0_DAT16__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC (_MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 (_MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 (_MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 (_MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 (_MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 (_MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__GPIO5_11 (_MX53_PAD_DISP0_DAT17__GPIO5_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO (_MX53_PAD_DISP0_DAT17__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD (_MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 (_MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 (_MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 (_MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 (_MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__GPIO5_12 (_MX53_PAD_DISP0_DAT18__GPIO5_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 (_MX53_PAD_DISP0_DAT18__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 (_MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 (_MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 (_MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 (_MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__GPIO5_13 (_MX53_PAD_DISP0_DAT19__GPIO5_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK (_MX53_PAD_DISP0_DAT19__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 (_MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 (_MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 (_MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 (_MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__GPIO5_14 (_MX53_PAD_DISP0_DAT20__GPIO5_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK (_MX53_PAD_DISP0_DAT20__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC (_MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 (_MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 (_MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI (_MX53_PAD_DISP0_DAT20__SATA_PHY_TDI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 (_MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__GPIO5_15 (_MX53_PAD_DISP0_DAT21__GPIO5_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI (_MX53_PAD_DISP0_DAT21__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD (_MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 (_MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 (_MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO (_MX53_PAD_DISP0_DAT21__SATA_PHY_TDO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 (_MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__GPIO5_16 (_MX53_PAD_DISP0_DAT22__GPIO5_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO (_MX53_PAD_DISP0_DAT22__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS (_MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 (_MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 (_MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK (_MX53_PAD_DISP0_DAT22__SATA_PHY_TCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 (_MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__GPIO5_17 (_MX53_PAD_DISP0_DAT23__GPIO5_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 (_MX53_PAD_DISP0_DAT23__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD (_MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 (_MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 (_MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS (_MX53_PAD_DISP0_DAT23__SATA_PHY_TMS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK (_MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 (_MX53_PAD_CSI0_PIXCLK__GPIO5_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 (_MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 (_MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC (_MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__GPIO5_19 (_MX53_PAD_CSI0_MCLK__GPIO5_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK (_MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 (_MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 (_MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL (_MX53_PAD_CSI0_MCLK__TPIU_TRCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN (_MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 (_MX53_PAD_CSI0_DATA_EN__GPIO5_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 (_MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 (_MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK (_MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC (_MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21 (_MX53_PAD_CSI0_VSYNC__GPIO5_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 (_MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 (_MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 (_MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 (_MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__GPIO5_22 (_MX53_PAD_CSI0_DAT4__GPIO5_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5 (_MX53_PAD_CSI0_DAT4__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK (_MX53_PAD_CSI0_DAT4__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP (_MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC (_MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 (_MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 (_MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 (_MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__GPIO5_23 (_MX53_PAD_CSI0_DAT5__GPIO5_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 (_MX53_PAD_CSI0_DAT5__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI (_MX53_PAD_CSI0_DAT5__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT (_MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD (_MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 (_MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 (_MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 (_MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__GPIO5_24 (_MX53_PAD_CSI0_DAT6__GPIO5_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6 (_MX53_PAD_CSI0_DAT6__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO (_MX53_PAD_CSI0_DAT6__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK (_MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS (_MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 (_MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 (_MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 (_MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__GPIO5_25 (_MX53_PAD_CSI0_DAT7__GPIO5_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 (_MX53_PAD_CSI0_DAT7__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 (_MX53_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR (_MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD (_MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 (_MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 (_MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 (_MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__GPIO5_26 (_MX53_PAD_CSI0_DAT8__GPIO5_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__GPIO5_27 (_MX53_PAD_CSI0_DAT9__GPIO5_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__GPIO5_28 (_MX53_PAD_CSI0_DAT10__GPIO5_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX (_MX53_PAD_CSI0_DAT10__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO (_MX53_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC (_MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 (_MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 (_MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 (_MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 (_MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__GPIO5_29 (_MX53_PAD_CSI0_DAT11__GPIO5_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX (_MX53_PAD_CSI0_DAT11__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 (_MX53_PAD_CSI0_DAT11__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS (_MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 (_MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 (_MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 (_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 (_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__GPIO5_30 (_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 (_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 (_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 (_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 (_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 (_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__GPIO5_31 (_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 (_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 (_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 (_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 (_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 (_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__GPIO6_0 (_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 (_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 (_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 (_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 (_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 (_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__GPIO6_1 (_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 (_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 (_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 (_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 (_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 (_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__GPIO6_2 (_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 (_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 (_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 (_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 (_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 (_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__GPIO6_3 (_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 (_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 (_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 (_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 (_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 (_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__GPIO6_4 (_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 (_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 (_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 (_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 (_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 (_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__GPIO6_5 (_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 (_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 (_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 (_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK (_MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 (_MX53_PAD_EIM_A25__EMI_WEIM_A_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__GPIO5_2 (_MX53_PAD_EIM_A25__GPIO5_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__ECSPI2_RDY (_MX53_PAD_EIM_A25__ECSPI2_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 (_MX53_PAD_EIM_A25__IPU_DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__CSPI_SS1 (_MX53_PAD_EIM_A25__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS (_MX53_PAD_EIM_A25__IPU_DI0_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK (_MX53_PAD_EIM_A25__USBPHY1_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 (_MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__GPIO2_30 (_MX53_PAD_EIM_EB2__GPIO2_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 (_MX53_PAD_EIM_D19__IPU_DI0_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS (_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__ECSPI1_SS1 (_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__EPIT1_EPITO (_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC (_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 (_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__GPIO3_20 (_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 (_MX53_PAD_EIM_D20__IPU_DI0_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS (_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__CSPI_SS0 (_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__EPIT2_EPITO (_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 (_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__GPIO3_21 (_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 (_MX53_PAD_EIM_D22__IPU_DI0_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN (_MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__CSPI_MISO (_MX53_PAD_EIM_D22__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR (_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 (_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__GPIO3_23 (_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D23__UART1_DCD (_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS (_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 (_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 (_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 (_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__GPIO2_31 (_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__UART1_RI (_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC (_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 (_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__GPIO3_24 (_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D24__ECSPI1_SS2 (_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__CSPI_SS2 (_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS (_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__ECSPI2_SS2 (_MX53_PAD_EIM_D24__ECSPI2_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__UART1_DTR (_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 (_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__GPIO3_25 (_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D25__ECSPI1_SS3 (_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__CSPI_SS3 (_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC (_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__ECSPI2_SS3 (_MX53_PAD_EIM_D25__ECSPI2_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__UART1_DSR (_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 (_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__GPIO3_26 (_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D26__FIRI_RXD (_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 (_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 (_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_SISG_2 (_MX53_PAD_EIM_D26__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 (_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 (_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__GPIO3_27 (_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D27__FIRI_TXD (_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 (_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 (_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_SISG_3 (_MX53_PAD_EIM_D27__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 (_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 (_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__GPIO3_28 (_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__GPIO3_29 (_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS (_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__CSPI_SS0 (_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 (_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC (_MX53_PAD_EIM_D29__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 (_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 (_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__GPIO3_30 (_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 (_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 (_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 (_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC (_MX53_PAD_EIM_D30__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC (_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 (_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__GPIO3_31 (_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 (_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 (_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 (_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 (_MX53_PAD_EIM_A24__EMI_WEIM_A_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__GPIO5_4 (_MX53_PAD_EIM_A24__GPIO5_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 (_MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 (_MX53_PAD_EIM_A24__IPU_CSI1_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__IPU_SISG_2 (_MX53_PAD_EIM_A24__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID (_MX53_PAD_EIM_A24__USBPHY2_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 (_MX53_PAD_EIM_A23__EMI_WEIM_A_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__GPIO6_6 (_MX53_PAD_EIM_A23__GPIO6_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 (_MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 (_MX53_PAD_EIM_A23__IPU_CSI1_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__IPU_SISG_3 (_MX53_PAD_EIM_A23__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION (_MX53_PAD_EIM_A23__USBPHY2_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 (_MX53_PAD_EIM_A22__EMI_WEIM_A_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__GPIO2_16 (_MX53_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 (_MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 (_MX53_PAD_EIM_A22__IPU_CSI1_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 (_MX53_PAD_EIM_A22__SRC_BT_CFG1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 (_MX53_PAD_EIM_A21__EMI_WEIM_A_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__GPIO2_17 (_MX53_PAD_EIM_A21__GPIO2_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 (_MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 (_MX53_PAD_EIM_A21__IPU_CSI1_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 (_MX53_PAD_EIM_A21__SRC_BT_CFG1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 (_MX53_PAD_EIM_A20__EMI_WEIM_A_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__GPIO2_18 (_MX53_PAD_EIM_A20__GPIO2_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 (_MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 (_MX53_PAD_EIM_A20__IPU_CSI1_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 (_MX53_PAD_EIM_A20__SRC_BT_CFG1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 (_MX53_PAD_EIM_A19__EMI_WEIM_A_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__GPIO2_19 (_MX53_PAD_EIM_A19__GPIO2_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 (_MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 (_MX53_PAD_EIM_A19__IPU_CSI1_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 (_MX53_PAD_EIM_A19__SRC_BT_CFG1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 (_MX53_PAD_EIM_A18__EMI_WEIM_A_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__GPIO2_20 (_MX53_PAD_EIM_A18__GPIO2_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 (_MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 (_MX53_PAD_EIM_A18__IPU_CSI1_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 (_MX53_PAD_EIM_A18__SRC_BT_CFG1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 (_MX53_PAD_EIM_A17__EMI_WEIM_A_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__GPIO2_21 (_MX53_PAD_EIM_A17__GPIO2_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 (_MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 (_MX53_PAD_EIM_A17__IPU_CSI1_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 (_MX53_PAD_EIM_A17__SRC_BT_CFG1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 (_MX53_PAD_EIM_A16__EMI_WEIM_A_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__GPIO2_22 (_MX53_PAD_EIM_A16__GPIO2_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK (_MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK (_MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 (_MX53_PAD_EIM_A16__SRC_BT_CFG1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 (_MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__GPIO2_23 (_MX53_PAD_EIM_CS0__GPIO2_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK (_MX53_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 (_MX53_PAD_EIM_CS0__IPU_DI1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 (_MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__GPIO2_24 (_MX53_PAD_EIM_CS1__GPIO2_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI (_MX53_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (_MX53_PAD_EIM_CS1__IPU_DI1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE (_MX53_PAD_EIM_OE__EMI_WEIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__GPIO2_25 (_MX53_PAD_EIM_OE__GPIO2_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__ECSPI2_MISO (_MX53_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 (_MX53_PAD_EIM_OE__IPU_DI1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG (_MX53_PAD_EIM_OE__USBPHY2_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW (_MX53_PAD_EIM_RW__EMI_WEIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__GPIO2_26 (_MX53_PAD_EIM_RW__GPIO2_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__ECSPI2_SS0 (_MX53_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 (_MX53_PAD_EIM_RW__IPU_DI1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT (_MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA (_MX53_PAD_EIM_LBA__EMI_WEIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__GPIO2_27 (_MX53_PAD_EIM_LBA__GPIO2_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1 (_MX53_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 (_MX53_PAD_EIM_LBA__IPU_DI1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 (_MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 (_MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__GPIO2_28 (_MX53_PAD_EIM_EB0__GPIO2_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 (_MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 (_MX53_PAD_EIM_EB0__IPU_CSI1_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY (_MX53_PAD_EIM_EB0__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 (_MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 (_MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__GPIO2_29 (_MX53_PAD_EIM_EB1__GPIO2_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 (_MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 (_MX53_PAD_EIM_EB1__IPU_CSI1_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 (_MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 (_MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__GPIO3_0 (_MX53_PAD_EIM_DA0__GPIO3_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 (_MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 (_MX53_PAD_EIM_DA0__IPU_CSI1_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 (_MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 (_MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__GPIO3_1 (_MX53_PAD_EIM_DA1__GPIO3_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 (_MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 (_MX53_PAD_EIM_DA1__IPU_CSI1_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 (_MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 (_MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__GPIO3_2 (_MX53_PAD_EIM_DA2__GPIO3_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 (_MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 (_MX53_PAD_EIM_DA2__IPU_CSI1_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 (_MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 (_MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__GPIO3_3 (_MX53_PAD_EIM_DA3__GPIO3_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 (_MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 (_MX53_PAD_EIM_DA3__IPU_CSI1_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 (_MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 (_MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__GPIO3_4 (_MX53_PAD_EIM_DA4__GPIO3_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 (_MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 (_MX53_PAD_EIM_DA4__IPU_CSI1_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 (_MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 (_MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__GPIO3_5 (_MX53_PAD_EIM_DA5__GPIO3_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 (_MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 (_MX53_PAD_EIM_DA5__IPU_CSI1_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 (_MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 (_MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__GPIO3_6 (_MX53_PAD_EIM_DA6__GPIO3_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 (_MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 (_MX53_PAD_EIM_DA6__IPU_CSI1_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 (_MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 (_MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__GPIO3_7 (_MX53_PAD_EIM_DA7__GPIO3_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 (_MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 (_MX53_PAD_EIM_DA7__IPU_CSI1_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 (_MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 (_MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__GPIO3_8 (_MX53_PAD_EIM_DA8__GPIO3_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 (_MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 (_MX53_PAD_EIM_DA8__IPU_CSI1_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 (_MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 (_MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__GPIO3_9 (_MX53_PAD_EIM_DA9__GPIO3_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 (_MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 (_MX53_PAD_EIM_DA9__IPU_CSI1_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 (_MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 (_MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__GPIO3_10 (_MX53_PAD_EIM_DA10__GPIO3_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 (_MX53_PAD_EIM_DA10__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 (_MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 (_MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__GPIO3_11 (_MX53_PAD_EIM_DA11__GPIO3_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 (_MX53_PAD_EIM_DA11__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC (_MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 (_MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__GPIO3_12 (_MX53_PAD_EIM_DA12__GPIO3_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 (_MX53_PAD_EIM_DA12__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC (_MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 (_MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__GPIO3_13 (_MX53_PAD_EIM_DA13__GPIO3_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS (_MX53_PAD_EIM_DA13__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 (_MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__GPIO3_14 (_MX53_PAD_EIM_DA14__GPIO3_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS (_MX53_PAD_EIM_DA14__IPU_DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK (_MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 (_MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__GPIO3_15 (_MX53_PAD_EIM_DA15__GPIO3_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B (_MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WE_B__GPIO6_12 (_MX53_PAD_NANDF_WE_B__GPIO6_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B (_MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RE_B__GPIO6_13 (_MX53_PAD_NANDF_RE_B__GPIO6_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT (_MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_WAIT__GPIO5_0 (_MX53_PAD_EIM_WAIT__GPIO5_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B (_MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 (_MX53_PAD_LVDS1_TX3_P__GPIO6_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 (_MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 (_MX53_PAD_LVDS1_TX2_P__GPIO6_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 (_MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 (_MX53_PAD_LVDS1_CLK_P__GPIO6_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK (_MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 (_MX53_PAD_LVDS1_TX1_P__GPIO6_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 (_MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 (_MX53_PAD_LVDS1_TX0_P__GPIO6_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 (_MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 (_MX53_PAD_LVDS0_TX3_P__GPIO7_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 (_MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 (_MX53_PAD_LVDS0_CLK_P__GPIO7_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK (_MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 (_MX53_PAD_LVDS0_TX2_P__GPIO7_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 (_MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 (_MX53_PAD_LVDS0_TX1_P__GPIO7_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 (_MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 (_MX53_PAD_LVDS0_TX0_P__GPIO7_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 (_MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_10__GPIO4_0 (_MX53_PAD_GPIO_10__GPIO4_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT (_MX53_PAD_GPIO_10__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_11__GPIO4_1 (_MX53_PAD_GPIO_11__GPIO4_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_12__GPIO4_2 (_MX53_PAD_GPIO_12__GPIO4_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_13__GPIO4_3 (_MX53_PAD_GPIO_13__GPIO4_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_14__GPIO4_4 (_MX53_PAD_GPIO_14__GPIO4_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE (_MX53_PAD_NANDF_CLE__EMI_NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CLE__GPIO6_7 (_MX53_PAD_NANDF_CLE__GPIO6_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 (_MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE (_MX53_PAD_NANDF_ALE__EMI_NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_ALE__GPIO6_8 (_MX53_PAD_NANDF_ALE__GPIO6_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 (_MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B (_MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WP_B__GPIO6_9 (_MX53_PAD_NANDF_WP_B__GPIO6_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 (_MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 (_MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RB0__GPIO6_10 (_MX53_PAD_NANDF_RB0__GPIO6_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 (_MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 (_MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS0__GPIO6_11 (_MX53_PAD_NANDF_CS0__GPIO6_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 (_MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 (_MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__GPIO6_14 (_MX53_PAD_NANDF_CS1__GPIO6_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK (_MX53_PAD_NANDF_CS1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 (_MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 (_MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__GPIO6_15 (_MX53_PAD_NANDF_CS2__GPIO6_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0 (_MX53_PAD_NANDF_CS2__IPU_SISG_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0 (_MX53_PAD_NANDF_CS2__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE (_MX53_PAD_NANDF_CS2__EMI_WEIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK (_MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG (_MX53_PAD_NANDF_CS2__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 (_MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 (_MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__GPIO6_16 (_MX53_PAD_NANDF_CS3__GPIO6_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1 (_MX53_PAD_NANDF_CS3__IPU_SISG_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1 (_MX53_PAD_NANDF_CS3__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 (_MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT (_MX53_PAD_NANDF_CS3__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 (_MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__FEC_MDIO (_MX53_PAD_FEC_MDIO__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__GPIO1_22 (_MX53_PAD_FEC_MDIO__GPIO1_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR (_MX53_PAD_FEC_MDIO__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__FEC_COL (_MX53_PAD_FEC_MDIO__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 (_MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 (_MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 (_MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK (_MX53_PAD_FEC_REF_CLK__FEC_TX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23 (_MX53_PAD_FEC_REF_CLK__GPIO1_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR (_MX53_PAD_FEC_REF_CLK__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 (_MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 (_MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER (_MX53_PAD_FEC_RX_ER__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__GPIO1_24 (_MX53_PAD_FEC_RX_ER__GPIO1_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR (_MX53_PAD_FEC_RX_ER__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK (_MX53_PAD_FEC_RX_ER__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 (_MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV (_MX53_PAD_FEC_CRS_DV__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25 (_MX53_PAD_FEC_CRS_DV__GPIO1_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT (_MX53_PAD_FEC_CRS_DV__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 (_MX53_PAD_FEC_RXD1__FEC_RDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__GPIO1_26 (_MX53_PAD_FEC_RXD1__GPIO1_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__ESAI1_FST (_MX53_PAD_FEC_RXD1__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG (_MX53_PAD_FEC_RXD1__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 (_MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 (_MX53_PAD_FEC_RXD0__FEC_RDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__GPIO1_27 (_MX53_PAD_FEC_RXD0__GPIO1_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT (_MX53_PAD_FEC_RXD0__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT (_MX53_PAD_FEC_RXD0__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN (_MX53_PAD_FEC_TX_EN__FEC_TX_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TX_EN__GPIO1_28 (_MX53_PAD_FEC_TX_EN__GPIO1_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 (_MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 (_MX53_PAD_FEC_TXD1__FEC_TDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__GPIO1_29 (_MX53_PAD_FEC_TXD1__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 (_MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK (_MX53_PAD_FEC_TXD1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK (_MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 (_MX53_PAD_FEC_TXD0__FEC_TDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__GPIO1_30 (_MX53_PAD_FEC_TXD0__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 (_MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 (_MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__FEC_MDC (_MX53_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__GPIO1_31 (_MX53_PAD_FEC_MDC__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 (_MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT (_MX53_PAD_FEC_MDC__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG (_MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 (_MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__PATA_DIOW (_MX53_PAD_PATA_DIOW__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__GPIO6_17 (_MX53_PAD_PATA_DIOW__GPIO6_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX (_MX53_PAD_PATA_DIOW__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 (_MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__PATA_DMACK (_MX53_PAD_PATA_DMACK__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__GPIO6_18 (_MX53_PAD_PATA_DMACK__GPIO6_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX (_MX53_PAD_PATA_DMACK__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 (_MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ (_MX53_PAD_PATA_DMARQ__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__GPIO7_0 (_MX53_PAD_PATA_DMARQ__GPIO7_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX (_MX53_PAD_PATA_DMARQ__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 (_MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 (_MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN (_MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 (_MX53_PAD_PATA_BUFFER_EN__GPIO7_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX (_MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 (_MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 (_MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ (_MX53_PAD_PATA_INTRQ__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__GPIO7_2 (_MX53_PAD_PATA_INTRQ__GPIO7_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__UART2_CTS (_MX53_PAD_PATA_INTRQ__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN (_MX53_PAD_PATA_INTRQ__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 (_MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 (_MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__PATA_DIOR (_MX53_PAD_PATA_DIOR__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__GPIO7_3 (_MX53_PAD_PATA_DIOR__GPIO7_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__UART2_RTS (_MX53_PAD_PATA_DIOR__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN (_MX53_PAD_PATA_DIOR__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 (_MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__PATA_DA_0 (_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__GPIO7_6 (_MX53_PAD_PATA_DA_0__GPIO7_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST (_MX53_PAD_PATA_DA_0__ESDHC3_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE (_MX53_PAD_PATA_DA_0__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 (_MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__PATA_DA_1 (_MX53_PAD_PATA_DA_1__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__GPIO7_7 (_MX53_PAD_PATA_DA_1__GPIO7_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD (_MX53_PAD_PATA_DA_1__ESDHC4_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__UART3_CTS (_MX53_PAD_PATA_DA_1__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 (_MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__PATA_DA_2 (_MX53_PAD_PATA_DA_2__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__GPIO7_8 (_MX53_PAD_PATA_DA_2__GPIO7_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK (_MX53_PAD_PATA_DA_2__ESDHC4_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__UART3_RTS (_MX53_PAD_PATA_DA_2__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 (_MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__PATA_CS_0 (_MX53_PAD_PATA_CS_0__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__GPIO7_9 (_MX53_PAD_PATA_CS_0__GPIO7_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX (_MX53_PAD_PATA_CS_0__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 (_MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__PATA_CS_1 (_MX53_PAD_PATA_CS_1__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__GPIO7_10 (_MX53_PAD_PATA_CS_1__GPIO7_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX (_MX53_PAD_PATA_CS_1__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 (_MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0 (_MX53_PAD_PATA_DATA0__PATA_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__GPIO2_0 (_MX53_PAD_PATA_DATA0__GPIO2_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 (_MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 (_MX53_PAD_PATA_DATA0__ESDHC3_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 (_MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 (_MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 (_MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1 (_MX53_PAD_PATA_DATA1__PATA_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__GPIO2_1 (_MX53_PAD_PATA_DATA1__GPIO2_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 (_MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 (_MX53_PAD_PATA_DATA1__ESDHC3_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 (_MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 (_MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2 (_MX53_PAD_PATA_DATA2__PATA_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__GPIO2_2 (_MX53_PAD_PATA_DATA2__GPIO2_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 (_MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 (_MX53_PAD_PATA_DATA2__ESDHC3_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 (_MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 (_MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3 (_MX53_PAD_PATA_DATA3__PATA_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__GPIO2_3 (_MX53_PAD_PATA_DATA3__GPIO2_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 (_MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 (_MX53_PAD_PATA_DATA3__ESDHC3_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 (_MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 (_MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4 (_MX53_PAD_PATA_DATA4__PATA_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__GPIO2_4 (_MX53_PAD_PATA_DATA4__GPIO2_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 (_MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 (_MX53_PAD_PATA_DATA4__ESDHC4_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 (_MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 (_MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5 (_MX53_PAD_PATA_DATA5__PATA_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__GPIO2_5 (_MX53_PAD_PATA_DATA5__GPIO2_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 (_MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 (_MX53_PAD_PATA_DATA5__ESDHC4_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 (_MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 (_MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6 (_MX53_PAD_PATA_DATA6__PATA_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__GPIO2_6 (_MX53_PAD_PATA_DATA6__GPIO2_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 (_MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 (_MX53_PAD_PATA_DATA6__ESDHC4_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 (_MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 (_MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7 (_MX53_PAD_PATA_DATA7__PATA_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__GPIO2_7 (_MX53_PAD_PATA_DATA7__GPIO2_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 (_MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 (_MX53_PAD_PATA_DATA7__ESDHC4_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 (_MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 (_MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8 (_MX53_PAD_PATA_DATA8__PATA_DATA_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__GPIO2_8 (_MX53_PAD_PATA_DATA8__GPIO2_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 (_MX53_PAD_PATA_DATA8__ESDHC1_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 (_MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 (_MX53_PAD_PATA_DATA8__ESDHC3_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 (_MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 (_MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9 (_MX53_PAD_PATA_DATA9__PATA_DATA_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__GPIO2_9 (_MX53_PAD_PATA_DATA9__GPIO2_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 (_MX53_PAD_PATA_DATA9__ESDHC1_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 (_MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 (_MX53_PAD_PATA_DATA9__ESDHC3_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 (_MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 (_MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10 (_MX53_PAD_PATA_DATA10__PATA_DATA_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__GPIO2_10 (_MX53_PAD_PATA_DATA10__GPIO2_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 (_MX53_PAD_PATA_DATA10__ESDHC1_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 (_MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 (_MX53_PAD_PATA_DATA10__ESDHC3_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 (_MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 (_MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11 (_MX53_PAD_PATA_DATA11__PATA_DATA_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__GPIO2_11 (_MX53_PAD_PATA_DATA11__GPIO2_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 (_MX53_PAD_PATA_DATA11__ESDHC1_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 (_MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 (_MX53_PAD_PATA_DATA11__ESDHC3_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 (_MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 (_MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12 (_MX53_PAD_PATA_DATA12__PATA_DATA_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__GPIO2_12 (_MX53_PAD_PATA_DATA12__GPIO2_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 (_MX53_PAD_PATA_DATA12__ESDHC2_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 (_MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 (_MX53_PAD_PATA_DATA12__ESDHC4_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 (_MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 (_MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13 (_MX53_PAD_PATA_DATA13__PATA_DATA_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__GPIO2_13 (_MX53_PAD_PATA_DATA13__GPIO2_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 (_MX53_PAD_PATA_DATA13__ESDHC2_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 (_MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 (_MX53_PAD_PATA_DATA13__ESDHC4_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 (_MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 (_MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14 (_MX53_PAD_PATA_DATA14__PATA_DATA_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__GPIO2_14 (_MX53_PAD_PATA_DATA14__GPIO2_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 (_MX53_PAD_PATA_DATA14__ESDHC2_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 (_MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 (_MX53_PAD_PATA_DATA14__ESDHC4_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 (_MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 (_MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15 (_MX53_PAD_PATA_DATA15__PATA_DATA_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__GPIO2_15 (_MX53_PAD_PATA_DATA15__GPIO2_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 (_MX53_PAD_PATA_DATA15__ESDHC2_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 (_MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 (_MX53_PAD_PATA_DATA15__ESDHC4_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 (_MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 (_MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 (_MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__GPIO1_16 (_MX53_PAD_SD1_DATA0__GPIO1_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 (_MX53_PAD_SD1_DATA0__GPT_CAPIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__CSPI_MISO (_MX53_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP (_MX53_PAD_SD1_DATA0__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 (_MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__GPIO1_17 (_MX53_PAD_SD1_DATA1__GPIO1_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 (_MX53_PAD_SD1_DATA1__GPT_CAPIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__CSPI_SS0 (_MX53_PAD_SD1_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP (_MX53_PAD_SD1_DATA1__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD (_MX53_PAD_SD1_CMD__ESDHC1_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__GPIO1_18 (_MX53_PAD_SD1_CMD__GPIO1_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 (_MX53_PAD_SD1_CMD__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__CSPI_MOSI (_MX53_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP (_MX53_PAD_SD1_CMD__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 (_MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__GPIO1_19 (_MX53_PAD_SD1_DATA2__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 (_MX53_PAD_SD1_DATA2__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO (_MX53_PAD_SD1_DATA2__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__CSPI_SS1 (_MX53_PAD_SD1_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP (_MX53_PAD_SD1_DATA2__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK (_MX53_PAD_SD1_CLK__ESDHC1_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__GPIO1_20 (_MX53_PAD_SD1_CLK__GPIO1_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT (_MX53_PAD_SD1_CLK__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__GPT_CLKIN (_MX53_PAD_SD1_CLK__GPT_CLKIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__CSPI_SCLK (_MX53_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 (_MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 (_MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__GPIO1_21 (_MX53_PAD_SD1_DATA3__GPIO1_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 (_MX53_PAD_SD1_DATA3__GPT_CMPOUT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO (_MX53_PAD_SD1_DATA3__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__CSPI_SS2 (_MX53_PAD_SD1_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 (_MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK (_MX53_PAD_SD2_CLK__ESDHC2_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__GPIO1_10 (_MX53_PAD_SD2_CLK__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__KPP_COL_5 (_MX53_PAD_SD2_CLK__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS (_MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__CSPI_SCLK (_MX53_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V (_MX53_PAD_SD2_CLK__SCC_RANDOM_V | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD (_MX53_PAD_SD2_CMD__ESDHC2_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__GPIO1_11 (_MX53_PAD_SD2_CMD__GPIO1_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__KPP_ROW_5 (_MX53_PAD_SD2_CMD__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC (_MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__CSPI_MOSI (_MX53_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__SCC_RANDOM (_MX53_PAD_SD2_CMD__SCC_RANDOM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 (_MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__GPIO1_12 (_MX53_PAD_SD2_DATA3__GPIO1_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__KPP_COL_6 (_MX53_PAD_SD2_DATA3__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC (_MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__CSPI_SS2 (_MX53_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__SJC_DONE (_MX53_PAD_SD2_DATA3__SJC_DONE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 (_MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__GPIO1_13 (_MX53_PAD_SD2_DATA2__GPIO1_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6 (_MX53_PAD_SD2_DATA2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD (_MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__CSPI_SS1 (_MX53_PAD_SD2_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__SJC_FAIL (_MX53_PAD_SD2_DATA2__SJC_FAIL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 (_MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__GPIO1_14 (_MX53_PAD_SD2_DATA1__GPIO1_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__KPP_COL_7 (_MX53_PAD_SD2_DATA1__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS (_MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__CSPI_SS0 (_MX53_PAD_SD2_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO (_MX53_PAD_SD2_DATA1__RTIC_SEC_VIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 (_MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__GPIO1_15 (_MX53_PAD_SD2_DATA0__GPIO1_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7 (_MX53_PAD_SD2_DATA0__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD (_MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__CSPI_MISO (_MX53_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT (_MX53_PAD_SD2_DATA0__RTIC_DONE_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__CCM_CLKO (_MX53_PAD_GPIO_0__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__GPIO1_0 (_MX53_PAD_GPIO_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__KPP_COL_5 (_MX53_PAD_GPIO_0__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK (_MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__EPIT1_EPITO (_MX53_PAD_GPIO_0__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB (_MX53_PAD_GPIO_0__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR (_MX53_PAD_GPIO_0__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__CSU_TD (_MX53_PAD_GPIO_0__CSU_TD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__ESAI1_SCKR (_MX53_PAD_GPIO_1__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__GPIO1_1 (_MX53_PAD_GPIO_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__KPP_ROW_5 (_MX53_PAD_GPIO_1__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK (_MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__PWM2_PWMO (_MX53_PAD_GPIO_1__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B (_MX53_PAD_GPIO_1__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__ESDHC1_CD (_MX53_PAD_GPIO_1__ESDHC1_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK (_MX53_PAD_GPIO_1__SRC_TESTER_ACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__ESAI1_FSR (_MX53_PAD_GPIO_9__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__GPIO1_9 (_MX53_PAD_GPIO_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__KPP_COL_6 (_MX53_PAD_GPIO_9__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B (_MX53_PAD_GPIO_9__CCM_REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__PWM1_PWMO (_MX53_PAD_GPIO_9__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B (_MX53_PAD_GPIO_9__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__ESDHC1_WP (_MX53_PAD_GPIO_9__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC (_MX53_PAD_GPIO_3__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL (_MX53_PAD_GPIO_6__ESDHC2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__MLB_MLBSIG (_MX53_PAD_GPIO_6__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__ESAI1_FST (_MX53_PAD_GPIO_2__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__GPIO1_2 (_MX53_PAD_GPIO_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__KPP_ROW_6 (_MX53_PAD_GPIO_2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 (_MX53_PAD_GPIO_2__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 (_MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 (_MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__ESDHC2_WP (_MX53_PAD_GPIO_2__ESDHC2_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__MLB_MLBDAT (_MX53_PAD_GPIO_2__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__ESAI1_HCKT (_MX53_PAD_GPIO_4__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__GPIO1_4 (_MX53_PAD_GPIO_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__KPP_COL_7 (_MX53_PAD_GPIO_4__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 (_MX53_PAD_GPIO_4__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 (_MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 (_MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__ESDHC2_CD (_MX53_PAD_GPIO_4__ESDHC2_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE (_MX53_PAD_GPIO_4__SCC_SEC_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 (_MX53_PAD_GPIO_5__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__GPIO1_5 (_MX53_PAD_GPIO_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__KPP_ROW_7 (_MX53_PAD_GPIO_5__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__EPIT1_EPITO (_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_GPIO_7__FIRI_RXD (_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK (_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP (_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 (_MX53_PAD_GPIO_8__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__GPIO1_8 (_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__EPIT2_EPITO (_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_GPIO_8__FIRI_TXD (_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK (_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP (_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 (_MX53_PAD_GPIO_16__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__GPIO7_11 (_MX53_PAD_GPIO_16__GPIO7_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 (_MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY (_MX53_PAD_GPIO_17__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG (_MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__SPDIF_OUT1 (_MX53_PAD_GPIO_17__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__IPU_SNOOP2 (_MX53_PAD_GPIO_17__IPU_SNOOP2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT (_MX53_PAD_GPIO_17__SJC_JTAG_ACT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__ESAI1_TX1 (_MX53_PAD_GPIO_18__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__GPIO7_13 (_MX53_PAD_GPIO_18__GPIO7_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 (_MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__OWIRE_LINE (_MX53_PAD_GPIO_18__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG (_MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK (_MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL (_MX53_PAD_GPIO_18__ESDHC1_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST (_MX53_PAD_GPIO_18__SRC_SYSTEM_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL \
+ IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 \
+ IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 \
+ IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 \
+ IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 \
+ IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 \
+ IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 \
+ IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 \
+ IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 \
+ IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 \
+ IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 \
+ IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 \
+ IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C)
+#define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
+#define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index ebbce33..2fa3b54 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -80,6 +80,7 @@
((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
+#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
/*
* Use to set PAD control
*/
@@ -89,11 +90,11 @@
#define PAD_CTL_HYS (1 << 8)
#define PAD_CTL_PKE (1 << 7)
-#define PAD_CTL_PUE (1 << 6)
-#define PAD_CTL_PUS_100K_DOWN (0 << 4)
-#define PAD_CTL_PUS_47K_UP (1 << 4)
-#define PAD_CTL_PUS_100K_UP (2 << 4)
-#define PAD_CTL_PUS_22K_UP (3 << 4)
+#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
+#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
#define PAD_CTL_ODE (1 << 3)
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 00e812b..fd9efb0 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -14,9 +14,15 @@
#include <asm-generic/gpio.h>
/*
- * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
+ * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
+ * have 128 IRQs, and those with AVIC have 64.
+ *
+ * To support single image, the biggest number should be defined on
+ * top of the list.
*/
-#ifdef CONFIG_MXC_TZIC
+#if defined CONFIG_ARM_GIC
+#define MXC_INTERNAL_IRQS 160
+#elif defined CONFIG_MXC_TZIC
#define MXC_INTERNAL_IRQS 128
#else
#define MXC_INTERNAL_IRQS 64
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
deleted file mode 100644
index 11be5cd..0000000
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#define MX1_PHYS_OFFSET UL(0x08000000)
-#define MX21_PHYS_OFFSET UL(0xc0000000)
-#define MX25_PHYS_OFFSET UL(0x80000000)
-#define MX27_PHYS_OFFSET UL(0xa0000000)
-#define MX3x_PHYS_OFFSET UL(0x80000000)
-#define MX50_PHYS_OFFSET UL(0x70000000)
-#define MX51_PHYS_OFFSET UL(0x90000000)
-#define MX53_PHYS_OFFSET UL(0x70000000)
-
-#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
-# if defined CONFIG_ARCH_MX1
-# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX21
-# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX25
-# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX27
-# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX3
-# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX50
-# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX51
-# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX53
-# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET
-# endif
-#endif
-
-#if defined(CONFIG_MX3_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 087cd7a..ccebf5b 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -41,6 +41,7 @@
#define MX25_SSI2_BASE_ADDR 0x50014000
#define MX25_SSI1_BASE_ADDR 0x50034000
#define MX25_NFC_BASE_ADDR 0xbb000000
+#define MX25_IIM_BASE_ADDR 0x53ff0000
#define MX25_DRYICE_BASE_ADDR 0x53ffc000
#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
@@ -104,4 +105,8 @@
#define MX25_DMA_REQ_SSI1_RX0 28
#define MX25_DMA_REQ_SSI1_TX0 29
+#ifndef __ASSEMBLY__
+extern int mx25_revision(void);
+#endif
+
#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 1dc1c52..6265357 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
#ifndef __MACH_MX27_H__
#define __MACH_MX27_H__
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_SIZE SZ_1M
#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
@@ -131,16 +127,6 @@
#define MX27_IO_P2V(x) IMX_IO_P2V(x)
#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
-#ifndef __ASSEMBLER__
-static inline void mx27_setup_weimcs(size_t cs,
- unsigned upper, unsigned lower, unsigned addional)
-{
- __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
- __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
- __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
-}
-#endif
-
/* fixed interrupt numbers */
#define MX27_INT_I2C2 1
#define MX27_INT_GPT6 2
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 79e7fc0..e27619e 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,10 +1,6 @@
#ifndef __MACH_MX31_H__
#define __MACH_MX31_H__
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
/*
* IRAM
*/
@@ -122,16 +118,6 @@
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
-#ifndef __ASSEMBLER__
-static inline void mx31_setup_weimcs(size_t cs,
- unsigned upper, unsigned lower, unsigned addional)
-{
- __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
- __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
- __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
-}
-#endif
-
#define MX31_INT_I2C3 3
#define MX31_INT_I2C2 4
#define MX31_INT_MPEG4_ENCODER 5
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index d13dbfe..80965a9 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -36,7 +36,7 @@
#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
-#define MX35_ATA_DMA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
#define MX35_FEC_BASE_ADDR 0x50038000
#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 388a407..30dbf42 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -187,22 +187,8 @@
/* Mandatory defines used globally */
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-extern unsigned int mx31_cpu_rev;
-extern void mx31_read_cpu_rev(void);
-
-static inline int mx31_revision(void)
-{
- return mx31_cpu_rev;
-}
-
-extern unsigned int mx35_cpu_rev;
-extern void mx35_read_cpu_rev(void);
-
-static inline int mx35_revision(void)
-{
- return mx35_cpu_rev;
-}
+extern int mx35_revision(void);
+extern int mx31_revision(void);
#endif
#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index dede19a..cdf07c6 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -18,18 +18,6 @@
#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
-#define MX51_DEBUG_BASE_ADDR 0x60000000
-#define MX51_DEBUG_SIZE SZ_1M
-
-#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000)
-#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000)
-#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000)
-#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000)
-#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000)
-#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000)
-#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000)
-#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000)
-
/*
* SPBA global module enabled #0
*/
@@ -55,7 +43,10 @@
#define MX51_AIPS1_BASE_ADDR 0x73f00000
#define MX51_AIPS1_SIZE SZ_1M
-#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000)
+#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200)
+#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400)
#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
@@ -132,6 +123,7 @@
#define MX51_GPU2D_BASE_ADDR 0xd0000000
#define MX51_TZIC_BASE_ADDR 0xe0000000
+#define MX51_TZIC_SIZE SZ_16K
#define MX51_IO_P2V(x) IMX_IO_P2V(x)
#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
@@ -240,117 +232,114 @@
/*
* Interrupt numbers
*/
-#define MX51_MXC_INT_BASE 0
-#define MX51_MXC_INT_RESV0 0
+#define MX51_INT_BASE 0
+#define MX51_INT_RESV0 0
#define MX51_INT_ESDHC1 1
#define MX51_INT_ESDHC2 2
#define MX51_INT_ESDHC3 3
#define MX51_INT_ESDHC4 4
-#define MX51_MXC_INT_RESV5 5
+#define MX51_INT_RESV5 5
#define MX51_INT_SDMA 6
-#define MX51_MXC_INT_IOMUX 7
+#define MX51_INT_IOMUX 7
#define MX51_INT_NFC 8
-#define MX51_MXC_INT_VPU 9
+#define MX51_INT_VPU 9
#define MX51_INT_IPU_ERR 10
#define MX51_INT_IPU_SYN 11
-#define MX51_MXC_INT_GPU 12
-#define MX51_MXC_INT_RESV13 13
-#define MX51_MXC_INT_USB_H1 14
-#define MX51_MXC_INT_EMI 15
-#define MX51_MXC_INT_USB_H2 16
-#define MX51_MXC_INT_USB_H3 17
-#define MX51_MXC_INT_USB_OTG 18
-#define MX51_MXC_INT_SAHARA_H0 19
-#define MX51_MXC_INT_SAHARA_H1 20
-#define MX51_MXC_INT_SCC_SMN 21
-#define MX51_MXC_INT_SCC_STZ 22
-#define MX51_MXC_INT_SCC_SCM 23
-#define MX51_MXC_INT_SRTC_NTZ 24
-#define MX51_MXC_INT_SRTC_TZ 25
-#define MX51_MXC_INT_RTIC 26
-#define MX51_MXC_INT_CSU 27
-#define MX51_MXC_INT_SLIM_B 28
+#define MX51_INT_GPU 12
+#define MX51_INT_RESV13 13
+#define MX51_INT_USB_HS1 14
+#define MX51_INT_EMI 15
+#define MX51_INT_USB_HS2 16
+#define MX51_INT_USB_HS3 17
+#define MX51_INT_USB_OTG 18
+#define MX51_INT_SAHARA_H0 19
+#define MX51_INT_SAHARA_H1 20
+#define MX51_INT_SCC_SMN 21
+#define MX51_INT_SCC_STZ 22
+#define MX51_INT_SCC_SCM 23
+#define MX51_INT_SRTC_NTZ 24
+#define MX51_INT_SRTC_TZ 25
+#define MX51_INT_RTIC 26
+#define MX51_INT_CSU 27
+#define MX51_INT_SLIM_B 28
#define MX51_INT_SSI1 29
#define MX51_INT_SSI2 30
#define MX51_INT_UART1 31
#define MX51_INT_UART2 32
#define MX51_INT_UART3 33
-#define MX51_MXC_INT_RESV34 34
-#define MX51_MXC_INT_RESV35 35
+#define MX51_INT_RESV34 34
+#define MX51_INT_RESV35 35
#define MX51_INT_ECSPI1 36
#define MX51_INT_ECSPI2 37
#define MX51_INT_CSPI 38
-#define MX51_MXC_INT_GPT 39
-#define MX51_MXC_INT_EPIT1 40
-#define MX51_MXC_INT_EPIT2 41
-#define MX51_MXC_INT_GPIO1_INT7 42
-#define MX51_MXC_INT_GPIO1_INT6 43
-#define MX51_MXC_INT_GPIO1_INT5 44
-#define MX51_MXC_INT_GPIO1_INT4 45
-#define MX51_MXC_INT_GPIO1_INT3 46
-#define MX51_MXC_INT_GPIO1_INT2 47
-#define MX51_MXC_INT_GPIO1_INT1 48
-#define MX51_MXC_INT_GPIO1_INT0 49
-#define MX51_MXC_INT_GPIO1_LOW 50
-#define MX51_MXC_INT_GPIO1_HIGH 51
-#define MX51_MXC_INT_GPIO2_LOW 52
-#define MX51_MXC_INT_GPIO2_HIGH 53
-#define MX51_MXC_INT_GPIO3_LOW 54
-#define MX51_MXC_INT_GPIO3_HIGH 55
-#define MX51_MXC_INT_GPIO4_LOW 56
-#define MX51_MXC_INT_GPIO4_HIGH 57
-#define MX51_MXC_INT_WDOG1 58
-#define MX51_MXC_INT_WDOG2 59
+#define MX51_INT_GPT 39
+#define MX51_INT_EPIT1 40
+#define MX51_INT_EPIT2 41
+#define MX51_INT_GPIO1_INT7 42
+#define MX51_INT_GPIO1_INT6 43
+#define MX51_INT_GPIO1_INT5 44
+#define MX51_INT_GPIO1_INT4 45
+#define MX51_INT_GPIO1_INT3 46
+#define MX51_INT_GPIO1_INT2 47
+#define MX51_INT_GPIO1_INT1 48
+#define MX51_INT_GPIO1_INT0 49
+#define MX51_INT_GPIO1_LOW 50
+#define MX51_INT_GPIO1_HIGH 51
+#define MX51_INT_GPIO2_LOW 52
+#define MX51_INT_GPIO2_HIGH 53
+#define MX51_INT_GPIO3_LOW 54
+#define MX51_INT_GPIO3_HIGH 55
+#define MX51_INT_GPIO4_LOW 56
+#define MX51_INT_GPIO4_HIGH 57
+#define MX51_INT_WDOG1 58
+#define MX51_INT_WDOG2 59
#define MX51_INT_KPP 60
#define MX51_INT_PWM1 61
#define MX51_INT_I2C1 62
#define MX51_INT_I2C2 63
-#define MX51_MXC_INT_HS_I2C 64
-#define MX51_MXC_INT_RESV65 65
-#define MX51_MXC_INT_RESV66 66
-#define MX51_MXC_INT_SIM_IPB 67
-#define MX51_MXC_INT_SIM_DAT 68
-#define MX51_MXC_INT_IIM 69
-#define MX51_MXC_INT_ATA 70
-#define MX51_MXC_INT_CCM1 71
-#define MX51_MXC_INT_CCM2 72
-#define MX51_MXC_INT_GPC1 73
-#define MX51_MXC_INT_GPC2 74
-#define MX51_MXC_INT_SRC 75
-#define MX51_MXC_INT_NM 76
-#define MX51_MXC_INT_PMU 77
-#define MX51_MXC_INT_CTI_IRQ 78
-#define MX51_MXC_INT_CTI1_TG0 79
-#define MX51_MXC_INT_CTI1_TG1 80
-#define MX51_MXC_INT_MCG_ERR 81
-#define MX51_MXC_INT_MCG_TMR 82
-#define MX51_MXC_INT_MCG_FUNC 83
-#define MX51_MXC_INT_GPU2_IRQ 84
-#define MX51_MXC_INT_GPU2_BUSY 85
-#define MX51_MXC_INT_RESV86 86
+#define MX51_INT_HS_I2C 64
+#define MX51_INT_RESV65 65
+#define MX51_INT_RESV66 66
+#define MX51_INT_SIM_IPB 67
+#define MX51_INT_SIM_DAT 68
+#define MX51_INT_IIM 69
+#define MX51_INT_ATA 70
+#define MX51_INT_CCM1 71
+#define MX51_INT_CCM2 72
+#define MX51_INT_GPC1 73
+#define MX51_INT_GPC2 74
+#define MX51_INT_SRC 75
+#define MX51_INT_NM 76
+#define MX51_INT_PMU 77
+#define MX51_INT_CTI_IRQ 78
+#define MX51_INT_CTI1_TG0 79
+#define MX51_INT_CTI1_TG1 80
+#define MX51_INT_MCG_ERR 81
+#define MX51_INT_MCG_TMR 82
+#define MX51_INT_MCG_FUNC 83
+#define MX51_INT_GPU2_IRQ 84
+#define MX51_INT_GPU2_BUSY 85
+#define MX51_INT_RESV86 86
#define MX51_INT_FEC 87
-#define MX51_MXC_INT_OWIRE 88
-#define MX51_MXC_INT_CTI1_TG2 89
-#define MX51_MXC_INT_SJC 90
-#define MX51_MXC_INT_SPDIF 91
-#define MX51_MXC_INT_TVE 92
-#define MX51_MXC_INT_FIRI 93
+#define MX51_INT_OWIRE 88
+#define MX51_INT_CTI1_TG2 89
+#define MX51_INT_SJC 90
+#define MX51_INT_SPDIF 91
+#define MX51_INT_TVE 92
+#define MX51_INT_FIRI 93
#define MX51_INT_PWM2 94
-#define MX51_MXC_INT_SLIM_EXP 95
+#define MX51_INT_SLIM_EXP 95
#define MX51_INT_SSI3 96
-#define MX51_MXC_INT_EMI_BOOT 97
-#define MX51_MXC_INT_CTI1_TG3 98
-#define MX51_MXC_INT_SMC_RX 99
-#define MX51_MXC_INT_VPU_IDLE 100
-#define MX51_MXC_INT_EMI_NFC 101
-#define MX51_MXC_INT_GPU_IDLE 102
+#define MX51_INT_EMI_BOOT 97
+#define MX51_INT_CTI1_TG3 98
+#define MX51_INT_SMC_RX 99
+#define MX51_INT_VPU_IDLE 100
+#define MX51_INT_EMI_NFC 101
+#define MX51_INT_GPU_IDLE 102
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx51_revision(void);
extern void mx51_display_revision(void);
#endif
-/* tape-out 1 defines */
-#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000
-
#endif /* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index 5e3c323..a37e8c3 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -9,6 +9,7 @@
/* TZIC */
#define MX53_TZIC_BASE_ADDR 0x0FFFC000
+#define MX53_TZIC_SIZE SZ_16K
/*
* AHCI SATA
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
new file mode 100644
index 0000000..254a561
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x) IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR 0x00a00000
+#define MX6Q_SCU_SIZE 0x1000
+#define MX6Q_CCM_BASE_ADDR 0x020c4000
+#define MX6Q_CCM_SIZE 0x4000
+#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
+#define MX6Q_ANATOP_SIZE 0x1000
+#define MX6Q_UART4_BASE_ADDR 0x021f0000
+#define MX6Q_UART4_SIZE 0x4000
+
+#endif /* __MACH_MX6Q_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 0987923..00a7819 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -183,13 +183,6 @@
};
int tzic_enable_wake(int is_idle);
-enum mxc_cpu_pwr_mode {
- WAIT_CLOCKED, /* wfi only */
- WAIT_UNCLOCKED, /* WAIT */
- WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
- STOP_POWER_ON, /* just STOP */
- STOP_POWER_OFF, /* STOP + SRPG */
-};
extern struct cpu_op *(*get_cpu_op)(int *op);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 51f02a9..cf88b35 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -17,41 +17,12 @@
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
#define __ASM_ARCH_MXC_SYSTEM_H__
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
static inline void arch_idle(void)
{
- /* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
- if (cpu_is_mx31() || cpu_is_mx35()) {
- unsigned long reg = 0;
- __asm__ __volatile__(
- /* disable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #0x00001000\n"
- "bic %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- /* invalidate I cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c5, 0\n"
- /* clear and invalidate D cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c14, 0\n"
- /* WFI */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c0, 4\n"
- "nop\n" "nop\n" "nop\n" "nop\n"
- "nop\n" "nop\n" "nop\n"
- /* enable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- : "=r" (reg));
- } else if (cpu_is_mx51())
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (imx_idle != NULL)
+ (imx_idle)();
else
cpu_do_idle();
}
diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c
index 96953e2..b6e1145 100644
--- a/arch/arm/plat-mxc/irq-common.c
+++ b/arch/arm/plat-mxc/irq-common.c
@@ -23,17 +23,17 @@
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
- struct mxc_irq_chip *chip;
- struct irq_chip *base;
+ struct irq_chip_generic *gc;
+ struct mxc_extra_irq *exirq;
int ret;
ret = -ENOSYS;
- base = irq_get_chip(irq);
- if (base) {
- chip = container_of(base, struct mxc_irq_chip, base);
- if (chip->set_priority)
- ret = chip->set_priority(irq, prio);
+ gc = irq_get_chip_data(irq);
+ if (gc && gc->private) {
+ exirq = gc->private;
+ if (exirq->set_priority)
+ ret = exirq->set_priority(irq, prio);
}
return ret;
@@ -43,15 +43,16 @@
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
{
struct irq_chip_generic *gc;
- int (*set_irq_fiq)(unsigned int, unsigned int);
+ struct mxc_extra_irq *exirq;
int ret;
ret = -ENOSYS;
gc = irq_get_chip_data(irq);
if (gc && gc->private) {
- set_irq_fiq = gc->private;
- ret = set_irq_fiq(irq, type);
+ exirq = gc->private;
+ if (exirq->set_irq_fiq)
+ ret = exirq->set_irq_fiq(irq, type);
}
return ret;
diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/plat-mxc/irq-common.h
index 7203543..6ccb3a1 100644
--- a/arch/arm/plat-mxc/irq-common.h
+++ b/arch/arm/plat-mxc/irq-common.h
@@ -19,9 +19,8 @@
#ifndef __PLAT_MXC_IRQ_COMMON_H__
#define __PLAT_MXC_IRQ_COMMON_H__
-struct mxc_irq_chip
+struct mxc_extra_irq
{
- struct irq_chip base;
int (*set_priority)(unsigned char irq, unsigned char prio);
int (*set_irq_fiq)(unsigned int irq, unsigned int type);
};
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 761c3c9..42d74ea 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -57,7 +57,7 @@
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
+ if (!(cpu_is_mx1() || cpu_is_mx21())) {
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
u32 cr;
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 8024f2a..9dad8dc 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -28,6 +28,9 @@
#include <asm/system.h>
#include <asm/mach-types.h>
+void (*imx_idle)(void) = NULL;
+void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+
static void __iomem *wdog_base;
/*
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index f257fcc..e993a184 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -42,7 +42,7 @@
#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
#define TZIC_PND0 0x0D00 /* Pending Register 0 */
-#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */
+#define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */
#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
@@ -74,6 +74,12 @@
static unsigned int *wakeup_intr[4];
+static struct mxc_extra_irq tzic_extra_irq = {
+#ifdef CONFIG_FIQ
+ .set_irq_fiq = tzic_set_irq_fiq,
+#endif
+};
+
static __init void tzic_init_gc(unsigned int irq_start)
{
struct irq_chip_generic *gc;
@@ -82,7 +88,7 @@
gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
handle_level_irq);
- gc->private = tzic_set_irq_fiq;
+ gc->private = &tzic_extra_irq;
gc->wake_enabled = IRQ_MSK(32);
wakeup_intr[idx] = &gc->wake_active;
@@ -96,6 +102,28 @@
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
+asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+ int i, irqofs, handled;
+
+ do {
+ handled = 0;
+
+ for (i = 0; i < 4; i++) {
+ stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
+ __raw_readl(tzic_base + TZIC_INTSEC0(i));
+
+ while (stat) {
+ handled = 1;
+ irqofs = fls(stat) - 1;
+ handle_IRQ(irqofs + i * 32, regs);
+ stat &= ~(1 << irqofs);
+ }
+ }
+ } while (handled);
+}
+
/*
* This function initializes the TZIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index ce65901..bca4914 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -15,10 +15,16 @@
config HAS_MTU
bool
- select HAVE_SCHED_CLOCK
help
Support for Multi Timer Unit. MTU provides access
to multiple interrupt generating programmable
32-bit free running decrementing counters.
+config NOMADIK_MTU_SCHED_CLOCK
+ bool
+ depends on HAS_MTU
+ select HAVE_SCHED_CLOCK
+ help
+ Use the Multi Timer Unit as the sched_clock.
+
endif
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
new file mode 100644
index 0000000..9605bf2
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
@@ -0,0 +1,88 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT 0x00
+#define NMK_GPIO_DATS 0x04
+#define NMK_GPIO_DATC 0x08
+#define NMK_GPIO_PDIS 0x0c
+#define NMK_GPIO_DIR 0x10
+#define NMK_GPIO_DIRS 0x14
+#define NMK_GPIO_DIRC 0x18
+#define NMK_GPIO_SLPC 0x1c
+#define NMK_GPIO_AFSLA 0x20
+#define NMK_GPIO_AFSLB 0x24
+
+#define NMK_GPIO_RIMSC 0x40
+#define NMK_GPIO_FIMSC 0x44
+#define NMK_GPIO_IS 0x48
+#define NMK_GPIO_IC 0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS 0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO 0
+#define NMK_GPIO_ALT_A 1
+#define NMK_GPIO_ALT_B 2
+#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+ NMK_GPIO_PULL_NONE,
+ NMK_GPIO_PULL_UP,
+ NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+ NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_NOCHANGE,
+ NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+extern void nmk_gpio_wakeups_suspend(void);
+extern void nmk_gpio_wakeups_resume(void);
+
+extern void nmk_gpio_clocks_enable(void);
+extern void nmk_gpio_clocks_disable(void);
+
+extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+ char *name;
+ int first_gpio;
+ int first_irq;
+ int num_gpio;
+ u32 (*get_secondary_status)(unsigned int bank);
+ void (*set_ioforce)(bool enable);
+ bool supports_sleepmode;
+};
+
+#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
deleted file mode 100644
index d5d7e65..0000000
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT 0x00
-#define NMK_GPIO_DATS 0x04
-#define NMK_GPIO_DATC 0x08
-#define NMK_GPIO_PDIS 0x0c
-#define NMK_GPIO_DIR 0x10
-#define NMK_GPIO_DIRS 0x14
-#define NMK_GPIO_DIRC 0x18
-#define NMK_GPIO_SLPC 0x1c
-#define NMK_GPIO_AFSLA 0x20
-#define NMK_GPIO_AFSLB 0x24
-
-#define NMK_GPIO_RIMSC 0x40
-#define NMK_GPIO_FIMSC 0x44
-#define NMK_GPIO_IS 0x48
-#define NMK_GPIO_IC 0x4c
-#define NMK_GPIO_RWIMSC 0x50
-#define NMK_GPIO_FWIMSC 0x54
-#define NMK_GPIO_WKS 0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO 0
-#define NMK_GPIO_ALT_A 1
-#define NMK_GPIO_ALT_B 2
-#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
- NMK_GPIO_PULL_NONE,
- NMK_GPIO_PULL_UP,
- NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
- NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_NOCHANGE,
- NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
- char *name;
- int first_gpio;
- int first_irq;
- int num_gpio;
- u32 (*get_secondary_status)(unsigned int bank);
- void (*set_ioforce)(bool enable);
- bool supports_sleepmode;
-};
-
-#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 65704a3..6508e76 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,54 +1,11 @@
#ifndef __PLAT_MTU_H
#define __PLAT_MTU_H
-/*
- * Guaranteed runtime conversion range in seconds for
- * the clocksource and clockevent.
- */
-#define MTU_MIN_RANGE 4
-
/* should be set by the platform code */
extern void __iomem *mtu_base;
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
-#define MTU_RIS 0x04 /* Raw interrupt status */
-#define MTU_MIS 0x08 /* Masked interrupt status */
-#define MTU_ICR 0x0C /* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
-#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
-#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
-#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA 0x80
-#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK 0x0c
-#define MTU_CRn_PRESCALE_1 0x00
-#define MTU_CRn_PRESCALE_16 0x04
-#define MTU_CRn_PRESCALE_256 0x08
-#define MTU_CRn_32BITS 0x02
-#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR 0xff0
-#define MTU_ITOP 0xff4
-
-#define MTU_PERIPH_ID0 0xfe0
-#define MTU_PERIPH_ID1 0xfe4
-#define MTU_PERIPH_ID2 0xfe8
-#define MTU_PERIPH_ID3 0xfeC
-
-#define MTU_PCELL0 0xff0
-#define MTU_PCELL1 0xff4
-#define MTU_PCELL2 0xff8
-#define MTU_PCELL3 0xffC
+void nmdk_clkevt_reset(void);
+void nmdk_clksrc_reset(void);
#endif /* __PLAT_MTU_H */
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 05a3936..22cb97d 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -37,7 +37,6 @@
* SLPM value = same as normal
*
* PIN_CFG - default config with alternate function
- * PIN_CFG_PULL - default config with alternate function and pull up/down
*/
typedef unsigned long pin_cfg_t;
@@ -133,10 +132,6 @@
(PIN_CFG_DEFAULT |\
(PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-#define PIN_CFG_PULL(num, alt, pull) \
- ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
- (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
-
extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ef74e157..30b6433 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -21,10 +21,59 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <plat/mtu.h>
+/*
+ * Guaranteed runtime conversion range in seconds for
+ * the clocksource and clockevent.
+ */
+#define MTU_MIN_RANGE 4
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
+#define MTU_RIS 0x04 /* Raw interrupt status */
+#define MTU_MIS 0x08 /* Masked interrupt status */
+#define MTU_ICR 0x0C /* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
+#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
+#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
+#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA 0x80
+#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK 0x0c
+#define MTU_CRn_PRESCALE_1 0x00
+#define MTU_CRn_PRESCALE_16 0x04
+#define MTU_CRn_PRESCALE_256 0x08
+#define MTU_CRn_32BITS 0x02
+#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR 0xff0
+#define MTU_ITOP 0xff4
+
+#define MTU_PERIPH_ID0 0xfe0
+#define MTU_PERIPH_ID1 0xfe4
+#define MTU_PERIPH_ID2 0xfe8
+#define MTU_PERIPH_ID3 0xfeC
+
+#define MTU_PCELL0 0xff0
+#define MTU_PCELL1 0xff4
+#define MTU_PCELL2 0xff8
+#define MTU_PCELL3 0xffC
+
+static bool clkevt_periodic;
+static u32 clk_prescale;
+static u32 nmdk_cycle; /* write-once */
void __iomem *mtu_base; /* Assigned by machine code */
+#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
@@ -48,32 +97,56 @@
u32 cyc = -readl(mtu_base + MTU_VAL(0));
update_sched_clock(&cd, cyc, (u32)~0);
}
+#endif
/* Clockevent device: use one-shot mode */
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+ writel(1 << 1, mtu_base + MTU_IMSC);
+ writel(evt, mtu_base + MTU_LR(1));
+ /* Load highest value, enable device, enable interrupts */
+ writel(MTU_CRn_ONESHOT | clk_prescale |
+ MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(1));
+
+ return 0;
+}
+
+void nmdk_clkevt_reset(void)
+{
+ if (clkevt_periodic) {
+
+ /* Timer: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(1));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
+
+ writel(MTU_CRn_PERIODIC | clk_prescale |
+ MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(1));
+ writel(1 << 1, mtu_base + MTU_IMSC);
+ } else {
+ /* Generate an interrupt to start the clockevent again */
+ (void) nmdk_clkevt_next(nmdk_cycle, NULL);
+ }
+}
+
static void nmdk_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
- u32 cr;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- pr_err("%s: periodic mode not supported\n", __func__);
+ clkevt_periodic = true;
+ nmdk_clkevt_reset();
break;
case CLOCK_EVT_MODE_ONESHOT:
- /* Load highest value, enable device, enable interrupts */
- cr = readl(mtu_base + MTU_CR(1));
- writel(0, mtu_base + MTU_LR(1));
- writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
- writel(1 << 1, mtu_base + MTU_IMSC);
+ clkevt_periodic = false;
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
- /* disable irq */
writel(0, mtu_base + MTU_IMSC);
/* disable timer */
- cr = readl(mtu_base + MTU_CR(1));
- cr &= ~MTU_CRn_ENA;
- writel(cr, mtu_base + MTU_CR(1));
+ writel(0, mtu_base + MTU_CR(1));
/* load some high default value */
writel(0xffffffff, mtu_base + MTU_LR(1));
break;
@@ -82,16 +155,9 @@
}
}
-static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
-{
- /* writing the value has immediate effect */
- writel(evt, mtu_base + MTU_LR(1));
- return 0;
-}
-
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.rating = 200,
.set_mode = nmdk_clkevt_mode,
.set_next_event = nmdk_clkevt_next,
@@ -116,11 +182,23 @@
.dev_id = &nmdk_clkevt,
};
+void nmdk_clksrc_reset(void)
+{
+ /* Disable */
+ writel(0, mtu_base + MTU_CR(0));
+
+ /* ClockSource: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(0));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+ writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(0));
+}
+
void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
- u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
@@ -138,30 +216,28 @@
rate = clk_get_rate(clk0);
if (rate > 32000000) {
rate /= 16;
- cr |= MTU_CRn_PRESCALE_16;
+ clk_prescale = MTU_CRn_PRESCALE_16;
} else {
- cr |= MTU_CRn_PRESCALE_1;
+ clk_prescale = MTU_CRn_PRESCALE_1;
}
+ nmdk_cycle = (rate + HZ/2) / HZ;
+
+
/* Timer 0 is the free running clocksource */
- writel(cr, mtu_base + MTU_CR(0));
- writel(0, mtu_base + MTU_LR(0));
- writel(0, mtu_base + MTU_BGLR(0));
- writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+ nmdk_clksrc_reset();
if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
rate, 200, 32, clocksource_mmio_readl_down))
pr_err("timer: failed to initialize clock source %s\n",
"mtu_0");
-
+#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
-
+#endif
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
- writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
-
nmdk_clkevt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
nmdk_clkevt.min_delta_ns =
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 5b605a9..aa59f42 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,7 @@
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select HAVE_IDE
+ select NEED_MACH_MEMORY_H
help
"Systems based on omap7xx, omap15xx or omap16xx"
@@ -133,18 +134,6 @@
This can also be changed at runtime (via the mbox_kfifo_size
module parameter).
-config OMAP_IOMMU
- tristate
-
-config OMAP_IOMMU_DEBUG
- tristate "Export OMAP IOMMU internals in DebugFS"
- depends on OMAP_IOMMU && DEBUG_FS
- help
- Select this to see extensive information about
- the internal state of OMAP IOMMU in debugfs.
-
- Say N unless you know you need this.
-
config OMAP_IOMMU_IVA2
bool
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index f0233e6..9852622 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -18,8 +18,6 @@
obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
-obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
-obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 923c9621..caa1f7b 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -18,7 +18,6 @@
#include <mach/hardware.h>
#include <plat/board.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index fc05b10..61a1ec2 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
@@ -19,7 +19,6 @@
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ea28f98d..1971932 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -8,7 +8,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,91 +24,9 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/menelaus.h>
-#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
-
-static struct platform_device **omap_mcbsp_devices;
-
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{
- int i;
-
- omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
- GFP_KERNEL);
- if (!omap_mcbsp_devices) {
- printk(KERN_ERR "Could not register McBSP devices\n");
- return;
- }
-
- for (i = 0; i < size; i++) {
- struct platform_device *new_mcbsp;
- int ret;
-
- new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
- if (!new_mcbsp)
- continue;
- platform_device_add_resources(new_mcbsp, &res[i * res_count],
- res_count);
- new_mcbsp->dev.platform_data = &config[i];
- ret = platform_device_add(new_mcbsp);
- if (ret) {
- platform_device_put(new_mcbsp);
- continue;
- }
- omap_mcbsp_devices[i] = new_mcbsp;
- }
-}
-
-#else
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{ }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
- defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static struct resource mcpdm_resources[] = {
- {
- .name = "mcpdm_mem",
- .start = OMAP44XX_MCPDM_BASE,
- .end = OMAP44XX_MCPDM_BASE + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "mcpdm_irq",
- .start = OMAP44XX_IRQ_MCPDM,
- .end = OMAP44XX_IRQ_MCPDM,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device omap_mcpdm_device = {
- .name = "omap-mcpdm",
- .id = -1,
- .num_resources = ARRAY_SIZE(mcpdm_resources),
- .resource = mcpdm_resources,
-};
-
-static void omap_init_mcpdm(void)
-{
- (void) platform_device_register(&omap_mcpdm_device);
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
@@ -291,7 +209,6 @@
* in alphabetical order so they're easier to sort through.
*/
omap_init_rng();
- omap_init_mcpdm();
omap_init_uwire();
return 0;
}
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 75a847d..2def4e1 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -3,6 +3,12 @@
*
* OMAP Dual-Mode Timers
*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * dmtimer adaptation to platform_driver.
+ *
* Copyright (C) 2005 Nokia Corporation
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
@@ -29,168 +35,80 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
#include <plat/dmtimer.h>
-#include <mach/irqs.h>
-static int dm_timer_count;
+static LIST_HEAD(omap_timer_list);
+static DEFINE_SPINLOCK(dm_timer_lock);
-#ifdef CONFIG_ARCH_OMAP1
-static struct omap_dm_timer omap1_dm_timers[] = {
- { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
- { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
- { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
- { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
- { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
- { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
- { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
- { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
-};
-
-static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
-
-#else
-#define omap1_dm_timers NULL
-#define omap1_dm_timer_count 0
-#endif /* CONFIG_ARCH_OMAP1 */
-
-#ifdef CONFIG_ARCH_OMAP2
-static struct omap_dm_timer omap2_dm_timers[] = {
- { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
-};
-
-static const char *omap2_dm_source_names[] __initdata = {
- "sys_ck",
- "func_32k_ck",
- "alt_ck",
- NULL
-};
-
-static struct clk *omap2_dm_source_clocks[3];
-static const int omap2_dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
-
-#else
-#define omap2_dm_timers NULL
-#define omap2_dm_timer_count 0
-#define omap2_dm_source_names NULL
-#define omap2_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_dm_timer omap3_dm_timers[] = {
- { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x49034000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x49036000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x49038000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4903A000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x4903C000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x4903E000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
-};
-
-static const char *omap3_dm_source_names[] __initdata = {
- "sys_ck",
- "omap_32k_fck",
- NULL
-};
-
-static struct clk *omap3_dm_source_clocks[2];
-static const int omap3_dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
-
-#else
-#define omap3_dm_timers NULL
-#define omap3_dm_timer_count 0
-#define omap3_dm_source_names NULL
-#define omap3_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct omap_dm_timer omap4_dm_timers[] = {
- { .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 },
- { .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 },
- { .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 },
- { .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 },
- { .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 },
- { .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 },
- { .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 },
- { .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 },
- { .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 },
- { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
-};
-static const char *omap4_dm_source_names[] __initdata = {
- "sys_clkin_ck",
- "sys_32k_ck",
- NULL
-};
-static struct clk *omap4_dm_source_clocks[2];
-static const int omap4_dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
-
-#else
-#define omap4_dm_timers NULL
-#define omap4_dm_timer_count 0
-#define omap4_dm_source_names NULL
-#define omap4_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP4 */
-
-static struct omap_dm_timer *dm_timers;
-static const char **dm_source_names;
-static struct clk **dm_source_clocks;
-
-static spinlock_t dm_timer_lock;
-
-/*
- * Reads timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode write pending bit must be
- * checked. Otherwise a read of a non completed write will produce an error.
+/**
+ * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
+ * @timer: timer pointer over which read operation to perform
+ * @reg: lowest byte holds the register offset
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode write
+ * pending bit must be checked. Otherwise a read of a non completed write
+ * will produce an error.
*/
static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
{
- return __omap_dm_timer_read(timer->io_base, reg, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ return __omap_dm_timer_read(timer, reg, timer->posted);
}
-/*
- * Writes timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode the write pending bit must be
- * checked. Otherwise a write on a register which has a pending write will be
- * lost.
+/**
+ * omap_dm_timer_write_reg - write timer registers in posted and non-posted mode
+ * @timer: timer pointer over which write operation is to perform
+ * @reg: lowest byte holds the register offset
+ * @value: data to write into the register
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode the write
+ * pending bit must be checked. Otherwise a write on a register which has a
+ * pending write will be lost.
*/
static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
u32 value)
{
- __omap_dm_timer_write(timer->io_base, reg, value, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ __omap_dm_timer_write(timer, reg, value, timer->posted);
+}
+
+static void omap_timer_restore_context(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET,
+ timer->context.tiocp_cfg);
+ if (timer->revision > 1)
+ __raw_writel(timer->context.tistat, timer->sys_stat);
+
+ __raw_writel(timer->context.tisr, timer->irq_stat);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
+ timer->context.twer);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
+ timer->context.tcrr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG,
+ timer->context.tldr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG,
+ timer->context.tmar);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+ timer->context.tsicr);
+ __raw_writel(timer->context.tier, timer->irq_ena);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
+ timer->context.tclr);
}
static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
{
int c;
+ if (!timer->sys_stat)
+ return;
+
c = 0;
- while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+ while (!(__raw_readl(timer->sys_stat) & 1)) {
c++;
if (c > 100000) {
printk(KERN_ERR "Timer failed to reset\n");
@@ -201,53 +119,65 @@
static void omap_dm_timer_reset(struct omap_dm_timer *timer)
{
- int autoidle = 0, wakeup = 0;
-
- if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
+ omap_dm_timer_enable(timer);
+ if (timer->pdev->id != 1) {
omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
omap_dm_timer_wait_for_reset(timer);
}
- omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
- /* Enable autoidle on OMAP2+ */
- if (cpu_class_is_omap2())
- autoidle = 1;
-
- /*
- * Enable wake-up on OMAP2 CPUs.
- */
- if (cpu_class_is_omap2())
- wakeup = 1;
-
- __omap_dm_timer_reset(timer->io_base, autoidle, wakeup);
+ __omap_dm_timer_reset(timer, 0, 0);
+ omap_dm_timer_disable(timer);
timer->posted = 1;
}
-void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+ int ret;
+
+ timer->fclk = clk_get(&timer->pdev->dev, "fck");
+ if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+ timer->fclk = NULL;
+ dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+ return -EINVAL;
+ }
+
+ if (pdata->needs_manual_reset)
+ omap_dm_timer_reset(timer);
+
+ ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+ timer->posted = 1;
+ return ret;
}
struct omap_dm_timer *omap_dm_timer_request(void)
{
- struct omap_dm_timer *timer = NULL;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
- int i;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- for (i = 0; i < dm_timer_count; i++) {
- if (dm_timers[i].reserved)
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->reserved)
continue;
- timer = &dm_timers[i];
+ timer = t;
timer->reserved = 1;
break;
}
+
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- if (timer != NULL)
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer request failed!\n", __func__);
return timer;
}
@@ -255,74 +185,65 @@
struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
- struct omap_dm_timer *timer;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
- spin_unlock_irqrestore(&dm_timer_lock, flags);
- printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
- __FILE__, __LINE__, __func__, id);
- dump_stack();
- return NULL;
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->pdev->id == id && !t->reserved) {
+ timer = t;
+ timer->reserved = 1;
+ break;
+ }
}
- timer = &dm_timers[id-1];
- timer->reserved = 1;
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer%d request failed!\n", __func__, id);
return timer;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
-void omap_dm_timer_free(struct omap_dm_timer *timer)
+int omap_dm_timer_free(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
- omap_dm_timer_disable(timer);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ clk_put(timer->fclk);
WARN_ON(!timer->reserved);
timer->reserved = 0;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_free);
void omap_dm_timer_enable(struct omap_dm_timer *timer)
{
- if (timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_enable(timer->fclk);
- clk_enable(timer->iclk);
- }
-#endif
-
- timer->enabled = 1;
+ pm_runtime_get_sync(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
- if (!timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_disable(timer->iclk);
- clk_disable(timer->fclk);
- }
-#endif
-
- timer->enabled = 0;
+ pm_runtime_put(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
- return timer->irq;
+ if (timer)
+ return timer->irq;
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
@@ -334,24 +255,29 @@
*/
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
- int i;
+ int i = 0;
+ struct omap_dm_timer *timer = NULL;
+ unsigned long flags;
/* If ARMXOR cannot be idled this function call is unnecessary */
if (!(inputmask & (1 << 1)))
return inputmask;
/* If any active timer is using ARMXOR return modified mask */
- for (i = 0; i < dm_timer_count; i++) {
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node) {
u32 l;
- l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (l & OMAP_TIMER_CTRL_ST) {
if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
inputmask &= ~(1 << 1);
else
inputmask &= ~(1 << 2);
}
+ i++;
}
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
return inputmask;
}
@@ -361,7 +287,9 @@
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
- return timer->fclk;
+ if (timer)
+ return timer->fclk;
+ return NULL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
@@ -375,70 +303,91 @@
#endif
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
+int omap_dm_timer_trigger(struct omap_dm_timer *timer)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
-void omap_dm_timer_start(struct omap_dm_timer *timer)
+int omap_dm_timer_start(struct omap_dm_timer *timer)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (!(l & OMAP_TIMER_CTRL_ST)) {
l |= OMAP_TIMER_CTRL_ST;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+
+ /* Save the context */
+ timer->context.tclr = l;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_start);
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
+int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- rate = clk_get_rate(timer->fclk);
-#endif
+ if (unlikely(!timer))
+ return -EINVAL;
- __omap_dm_timer_stop(timer->io_base, timer->posted, rate);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
+ if (!pdata->needs_manual_reset)
+ rate = clk_get_rate(timer->fclk);
-#ifdef CONFIG_ARCH_OMAP1
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
-{
- int n = (timer - dm_timers) << 1;
- u32 l;
-
- l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
- l |= source << n;
- omap_writel(l, MOD_CONF_CTRL_1);
+ __omap_dm_timer_stop(timer, timer->posted, rate);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-
-#else
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret;
+ struct dmtimer_platform_data *pdata;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ pdata = timer->pdev->dev.platform_data;
+
if (source < 0 || source >= 3)
return -EINVAL;
- return __omap_dm_timer_set_source(timer->fclk,
- dm_source_clocks[source]);
+ ret = pdata->set_timer_src(timer->pdev, source);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-#endif
-
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload)
l |= OMAP_TIMER_CTRL_AR;
@@ -448,15 +397,32 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
/* Optimized set_load which removes costly spin wait in timer_start */
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload) {
l |= OMAP_TIMER_CTRL_AR;
@@ -466,15 +432,25 @@
}
l |= OMAP_TIMER_CTRL_ST;
- __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted);
+ __omap_dm_timer_load_start(timer, l, load, timer->posted);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ timer->context.tcrr = load;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
unsigned int match)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (enable)
l |= OMAP_TIMER_CTRL_CE;
@@ -482,14 +458,24 @@
l &= ~OMAP_TIMER_CTRL_CE;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tmar = match;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
OMAP_TIMER_CTRL_PT | (0x03 << 10));
@@ -499,13 +485,22 @@
l |= OMAP_TIMER_CTRL_PT;
l |= trigger << 10;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
if (prescaler >= 0x00 && prescaler <= 0x07) {
@@ -513,13 +508,28 @@
l |= prescaler << 2;
}
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_int_enable(timer->io_base, value);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ __omap_dm_timer_int_enable(timer, value);
+
+ /* Save the context */
+ timer->context.tier = value;
+ timer->context.twer = value;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
@@ -527,40 +537,61 @@
{
unsigned int l;
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return 0;
+ }
+
+ l = __raw_readl(timer->irq_stat);
return l;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
- __omap_dm_timer_write_status(timer->io_base, value);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
+ return -EINVAL;
+
+ __omap_dm_timer_write_status(timer, value);
+ /* Save the context */
+ timer->context.tisr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
- return __omap_dm_timer_read_counter(timer->io_base, timer->posted);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not iavailable or enabled.\n", __func__);
+ return 0;
+ }
+
+ return __omap_dm_timer_read_counter(timer, timer->posted);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
+
+ /* Save the context */
+ timer->context.tcrr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
int omap_dm_timers_active(void)
{
- int i;
+ struct omap_dm_timer *timer;
- for (i = 0; i < dm_timer_count; i++) {
- struct omap_dm_timer *timer;
-
- timer = &dm_timers[i];
-
- if (!timer->enabled)
+ list_for_each_entry(timer, &omap_timer_list, node) {
+ if (!timer->reserved)
continue;
if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
@@ -572,69 +603,147 @@
}
EXPORT_SYMBOL_GPL(omap_dm_timers_active);
-static int __init omap_dm_timer_init(void)
+/**
+ * omap_dm_timer_probe - probe function called for every registered device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework at the end of device registration for all
+ * timer devices.
+ */
+static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
{
+ int ret;
+ unsigned long flags;
struct omap_dm_timer *timer;
- int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
+ struct resource *mem, *irq, *ioarea;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
- if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
return -ENODEV;
-
- spin_lock_init(&dm_timer_lock);
-
- if (cpu_class_is_omap1()) {
- dm_timers = omap1_dm_timers;
- dm_timer_count = omap1_dm_timer_count;
- map_size = SZ_2K;
- } else if (cpu_is_omap24xx()) {
- dm_timers = omap2_dm_timers;
- dm_timer_count = omap2_dm_timer_count;
- dm_source_names = omap2_dm_source_names;
- dm_source_clocks = omap2_dm_source_clocks;
- } else if (cpu_is_omap34xx()) {
- dm_timers = omap3_dm_timers;
- dm_timer_count = omap3_dm_timer_count;
- dm_source_names = omap3_dm_source_names;
- dm_source_clocks = omap3_dm_source_clocks;
- } else if (cpu_is_omap44xx()) {
- dm_timers = omap4_dm_timers;
- dm_timer_count = omap4_dm_timer_count;
- dm_source_names = omap4_dm_source_names;
- dm_source_clocks = omap4_dm_source_clocks;
}
- if (cpu_class_is_omap2())
- for (i = 0; dm_source_names[i] != NULL; i++)
- dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
-
- if (cpu_is_omap243x())
- dm_timers[0].phys_base = 0x49018000;
-
- for (i = 0; i < dm_timer_count; i++) {
- timer = &dm_timers[i];
-
- /* Static mapping, never released */
- timer->io_base = ioremap(timer->phys_base, map_size);
- BUG_ON(!timer->io_base);
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- char clk_name[16];
- sprintf(clk_name, "gpt%d_ick", i + 1);
- timer->iclk = clk_get(NULL, clk_name);
- sprintf(clk_name, "gpt%d_fck", i + 1);
- timer->fclk = clk_get(NULL, clk_name);
- }
-
- /* One or two timers may be set up early for sys_timer */
- if (sys_timer_reserved & (1 << i)) {
- timer->reserved = 1;
- timer->posted = 1;
- }
-#endif
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(!irq)) {
+ dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+ return -ENODEV;
}
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!mem)) {
+ dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+ return -ENODEV;
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
+ return -EBUSY;
+ }
+
+ timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+ if (!timer) {
+ dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_ioregion;
+ }
+
+ timer->io_base = ioremap(mem->start, resource_size(mem));
+ if (!timer->io_base) {
+ dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ timer->id = pdev->id;
+ timer->irq = irq->start;
+ timer->reserved = pdata->reserved;
+ timer->pdev = pdev;
+ timer->loses_context = pdata->loses_context;
+ timer->get_context_loss_count = pdata->get_context_loss_count;
+
+ /* Skip pm_runtime_enable for OMAP1 */
+ if (!pdata->needs_manual_reset) {
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
+ }
+
+ if (!timer->reserved) {
+ pm_runtime_get_sync(&pdev->dev);
+ __omap_dm_timer_init_regs(timer);
+ pm_runtime_put(&pdev->dev);
+ }
+
+ /* add the timer element to the list */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_add_tail(&timer->node, &omap_timer_list);
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ dev_dbg(&pdev->dev, "Device Probed.\n");
+
return 0;
+
+err_free_mem:
+ kfree(timer);
+
+err_free_ioregion:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return ret;
}
-arch_initcall(omap_dm_timer_init);
+/**
+ * omap_dm_timer_remove - cleanup a registered timer device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework whenever a timer device is unregistered.
+ * In addition to freeing platform resources it also deletes the timer
+ * entry from the local list.
+ */
+static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
+{
+ struct omap_dm_timer *timer;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node)
+ if (timer->pdev->id == pdev->id) {
+ list_del(&timer->node);
+ kfree(timer);
+ ret = 0;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ return ret;
+}
+
+static struct platform_driver omap_dm_timer_driver = {
+ .probe = omap_dm_timer_probe,
+ .remove = __devexit_p(omap_dm_timer_remove),
+ .driver = {
+ .name = "omap_timer",
+ },
+};
+
+static int __init omap_dm_timer_driver_init(void)
+{
+ return platform_driver_register(&omap_dm_timer_driver);
+}
+
+static void __exit omap_dm_timer_driver_exit(void)
+{
+ platform_driver_unregister(&omap_dm_timer_driver);
+}
+
+early_platform_init("earlytimer", &omap_dm_timer_driver);
+module_init(omap_dm_timer_driver_init);
+module_exit(omap_dm_timer_driver_exit);
+
+MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 3341ca4..679cbd4 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -108,6 +108,22 @@
res[1].start = INT_I2C;
pdata = &i2c_pdata[bus_id - 1];
+ /* all OMAP1 have IP version 1 register set */
+ pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+ /* all OMAP1 I2C are implemented like this */
+ pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+ /* how the cpu bus is wired up differs for 7xx only */
+
+ if (cpu_is_omap7xx())
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+ else
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
return platform_device_register(pdev);
}
@@ -123,21 +139,14 @@
omap_pm_set_max_mpu_wakeup_lat(dev, t);
}
-static struct omap_device_pm_latency omap_i2c_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
struct omap_i2c_bus_platform_data *pdata;
+ struct omap_i2c_dev_attr *dev_attr;
omap2_i2c_mux_pins(bus_id);
@@ -152,6 +161,16 @@
pdata = &i2c_pdata[bus_id - 1];
/*
+ * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+ * use, and functionality implementation flags, up to the OMAP I2C
+ * driver via platform data
+ */
+ pdata->rev = oh->class->rev;
+
+ dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+ pdata->flags = dev_attr->flags;
+
+ /*
* When waiting for completion of a i2c transfer, we need to
* set a wake up latency constraint for the MPU. This is to
* ensure quick enough wakeup from idle, when transfer
@@ -160,12 +179,12 @@
*/
if (cpu_is_omap34xx())
pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
- od = omap_device_build(name, bus_id, oh, pdata,
+ pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
- omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
- WARN(IS_ERR(od), "Could not build omap_device for %s\n", name);
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
#else
static inline int omap2_i2c_add_bus(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index df4b968..197ca03 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -80,8 +80,6 @@
*
* @div is the divisor that should be applied to the parent clock's rate
* to produce the current clock's rate.
- *
- * XXX @flags probably should be replaced with an struct omap_chip.
*/
struct clksel_rate {
u32 val;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 4564cc6..c50df48 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -45,6 +45,18 @@
extern void omap_reserve(void);
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void); /* Do not use this one */
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
+void omap_sram_init(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
@@ -53,13 +65,13 @@
struct omap_globals {
u32 class; /* OMAP class to detect */
void __iomem *tap; /* Control module ID code */
- unsigned long sdrc; /* SDRAM Controller */
- unsigned long sms; /* SDRAM Memory Scheduler */
- unsigned long ctrl; /* System Control Module */
- unsigned long ctrl_pad; /* PAD Control Module */
- unsigned long prm; /* Power and Reset Management */
- unsigned long cm; /* Clock Management */
- unsigned long cm2;
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *ctrl_pad; /* PAD Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+ void __iomem *cm2;
};
void omap2_set_globals_242x(void);
@@ -74,7 +86,11 @@
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
+void omap242x_map_io(void);
+void omap243x_map_io(void);
void omap3_map_io(void);
+void omap4_map_io(void);
+
/**
* omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67b3d75..2f90269 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -44,13 +44,6 @@
int omap_type(void);
-struct omap_chip_id {
- u16 oc;
- u8 type;
-};
-
-#define OMAP_CHIP_INIT(x) { .oc = x }
-
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
@@ -60,19 +53,6 @@
unsigned int omap_rev(void);
/*
- * Define CPU revision bits
- *
- * Verbose meaning of the revision bits may be different for a silicon
- * family. This difference can be handled separately.
- */
-#define OMAP_REVBITS_00 0x00
-#define OMAP_REVBITS_01 0x01
-#define OMAP_REVBITS_02 0x02
-#define OMAP_REVBITS_03 0x03
-#define OMAP_REVBITS_04 0x04
-#define OMAP_REVBITS_05 0x05
-
-/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
@@ -262,7 +242,7 @@
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3505, 0x3517)
IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
@@ -354,8 +334,9 @@
(!omap3_has_sgx()) && \
(omap3_has_iva()))
# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3505() is_omap3505()
# define cpu_is_omap3517() is_omap3517()
+# define cpu_is_omap3505() (cpu_is_omap3517() && \
+ !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti816x() is_ti816x()
@@ -379,35 +360,31 @@
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
#define OMAP243X_CLASS 0x24300024
#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
#define OMAP343X_CLASS 0x34300034
#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8))
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
#define OMAP363X_CLASS 0x36300034
#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8))
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP35XX_CLASS 0x35000034
-#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
-#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
-#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
-#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
-#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
-#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+#define OMAP3517_CLASS 0x35170034
+#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
+#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
@@ -418,61 +395,6 @@
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
-#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
-#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
-#define CHIP_IS_OMAP3630ES1 (1 << 7)
-#define CHIP_IS_OMAP4430ES1 (1 << 8)
-#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
-#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
-#define CHIP_IS_OMAP4430ES2 (1 << 11)
-#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
-#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
-#define CHIP_IS_TI816X (1 << 14)
-#define CHIP_IS_OMAP4460ES1_0 (1 << 15)
-
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
- CHIP_IS_OMAP4430ES2 | \
- CHIP_IS_OMAP4430ES2_1 | \
- CHIP_IS_OMAP4430ES2_2 | \
- CHIP_IS_OMAP4460ES1_0)
-
-/*
- * "GE" here represents "greater than or equal to" in terms of ES
- * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
- * chips at ES2 and beyond, but not, for example, any OMAP lines after
- * OMAP3.
- */
-#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
- CHIP_IS_OMAP3430ES3_0 | \
- CHIP_GE_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \
- CHIP_IS_OMAP3630ES1 | \
- CHIP_GE_OMAP3630ES1_1)
-#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \
- CHIP_IS_OMAP3630ES1_2)
-
-int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
/*
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index eb5d16c..d11025e 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/dmtimer.h
+ * arch/arm/plat-omap/include/plat/dmtimer.h
*
* OMAP Dual-Mode Timers
*
@@ -35,6 +35,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#ifndef __ASM_ARCH_DMTIMER_H
#define __ASM_ARCH_DMTIMER_H
@@ -59,12 +60,56 @@
* in OMAP4 can be distinguished.
*/
#define OMAP_TIMER_IP_VERSION_1 0x1
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE 0x80000000
+#define OMAP_TIMER_ALWON 0x40000000
+#define OMAP_TIMER_HAS_PWM 0x20000000
+
+struct omap_timer_capability_dev_attr {
+ u32 timer_capability;
+};
+
struct omap_dm_timer;
struct clk;
+struct timer_regs {
+ u32 tidr;
+ u32 tiocp_cfg;
+ u32 tistat;
+ u32 tisr;
+ u32 tier;
+ u32 twer;
+ u32 tclr;
+ u32 tcrr;
+ u32 tldr;
+ u32 ttrg;
+ u32 twps;
+ u32 tmar;
+ u32 tcar1;
+ u32 tsicr;
+ u32 tcar2;
+ u32 tpir;
+ u32 tnir;
+ u32 tcvr;
+ u32 tocr;
+ u32 towr;
+};
+
+struct dmtimer_platform_data {
+ int (*set_timer_src)(struct platform_device *pdev, int source);
+ int timer_ip_version;
+ u32 needs_manual_reset:1;
+ bool reserved;
+
+ bool loses_context;
+
+ u32 (*get_context_loss_count)(struct device *dev);
+};
+
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-void omap_dm_timer_free(struct omap_dm_timer *timer);
+int omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_enable(struct omap_dm_timer *timer);
void omap_dm_timer_disable(struct omap_dm_timer *timer);
@@ -73,23 +118,23 @@
u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-void omap_dm_timer_trigger(struct omap_dm_timer *timer);
-void omap_dm_timer_start(struct omap_dm_timer *timer);
-void omap_dm_timer_stop(struct omap_dm_timer *timer);
+int omap_dm_timer_trigger(struct omap_dm_timer *timer);
+int omap_dm_timer_start(struct omap_dm_timer *timer);
+int omap_dm_timer_stop(struct omap_dm_timer *timer);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
int omap_dm_timers_active(void);
@@ -98,12 +143,30 @@
* used by dmtimer.c and sys_timer related code.
*/
-/* register offsets */
-#define _OMAP_TIMER_ID_OFFSET 0x00
-#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10
-#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14
-#define _OMAP_TIMER_STAT_OFFSET 0x18
-#define _OMAP_TIMER_INT_EN_OFFSET 0x1c
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET 0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET 0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14
+#define OMAP_TIMER_V1_STAT_OFFSET 0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24
+#define OMAP_TIMER_V2_IRQSTATUS 0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET 0x14
+
#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
#define _OMAP_TIMER_CTRL_OFFSET 0x24
#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
@@ -147,21 +210,6 @@
/* register offsets with the write pending bit encoded */
#define WPSHIFT 16
-#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \
- | (WP_NONE << WPSHIFT))
-
#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
| (WP_NONE << WPSHIFT))
@@ -209,49 +257,88 @@
struct omap_dm_timer {
unsigned long phys_base;
+ int id;
int irq;
-#ifdef CONFIG_ARCH_OMAP2PLUS
struct clk *iclk, *fclk;
-#endif
- void __iomem *io_base;
+
+ void __iomem *io_base;
+ void __iomem *sys_stat; /* TISTAT timer status */
+ void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */
+ void __iomem *irq_ena; /* irq enable */
+ void __iomem *irq_dis; /* irq disable, only on v2 ip */
+ void __iomem *pend; /* write pending */
+ void __iomem *func_base; /* function register base */
+
unsigned long rate;
unsigned reserved:1;
- unsigned enabled:1;
unsigned posted:1;
+ struct timer_regs context;
+ bool loses_context;
+ int ctx_loss_count;
+ int revision;
+ struct platform_device *pdev;
+ struct list_head node;
+
+ u32 (*get_context_loss_count)(struct device *dev);
};
-extern u32 sys_timer_reserved;
-void omap_dm_timer_prepare(struct omap_dm_timer *timer);
+int omap_dm_timer_prepare(struct omap_dm_timer *timer);
-static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- return __raw_readl(base + (reg & 0xff));
+ return __raw_readl(timer->func_base + (reg & 0xff));
}
-static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
- int posted)
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- __raw_writel(val, base + (reg & 0xff));
+ __raw_writel(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = __raw_readl(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->sys_stat = timer->io_base +
+ OMAP_TIMER_V1_SYS_STAT_OFFSET;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = 0;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->sys_stat = 0;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
}
/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle,
- int wakeup)
+static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
+ int autoidle, int wakeup)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0);
+ l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
l |= 0x02 << 3; /* Set to smart-idle mode */
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
@@ -261,10 +348,10 @@
if (wakeup)
l |= 1 << 2;
- __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0);
+ __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
/* Match hardware reset default of posted mode */
- __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG,
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
}
@@ -286,18 +373,18 @@
return ret;
}
-static inline void __omap_dm_timer_stop(void __iomem *base, int posted,
- unsigned long rate)
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
#ifdef CONFIG_ARCH_OMAP2PLUS
/* Readback to make sure write has completed */
- __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
/*
* Wait for functional clock period x 3.5 to make sure that
* timer is stopped
@@ -307,34 +394,34 @@
}
/* Ack possibly pending interrupt */
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG,
- OMAP_TIMER_INT_OVERFLOW, 0);
+ __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
}
-static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl,
- unsigned int load, int posted)
+static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
+ u32 ctrl, unsigned int load,
+ int posted)
{
- __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted);
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
}
-static inline void __omap_dm_timer_int_enable(void __iomem *base,
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0);
- __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+ __raw_writel(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
}
-static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base,
- int posted)
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
{
- return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted);
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
}
-static inline void __omap_dm_timer_write_status(void __iomem *base,
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0);
+ __raw_writel(value, timer->irq_stat);
}
#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 91e8de3..9e86ee0 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -222,26 +222,6 @@
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
int tmp;
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index d72ec85..7f2969e 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -228,13 +228,13 @@
#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_EMIF2_SIZE SZ_1M
+#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_DMM_SIZE SZ_1M
+#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
/*
* ----------------------------------------------------------------------------
* Omap specific register access
@@ -247,6 +247,8 @@
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
+void omap_ioremap_init(void);
+
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
@@ -256,8 +258,31 @@
struct omap_sdrc_params;
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
@@ -300,7 +325,7 @@
#endif
extern void omap2_init_common_infrastructure(void);
-extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap omap_ioremap
@@ -309,6 +334,8 @@
void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
void omap_iounmap(volatile void __iomem *addr);
+extern void __init omap_init_consistent_dma_size(void);
+
#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 174f1b9..a1d79ee 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -25,16 +25,17 @@
};
};
-struct iommu {
+struct omap_iommu {
const char *name;
struct module *owner;
struct clk *clk;
void __iomem *regbase;
struct device *dev;
void *isr_priv;
+ struct iommu_domain *domain;
unsigned int refcount;
- struct mutex iommu_lock; /* global for this whole object */
+ spinlock_t iommu_lock; /* global for this whole object */
/*
* We don't change iopgd for a situation like pgd for a task,
@@ -48,8 +49,6 @@
struct list_head mmap;
struct mutex mmap_lock; /* protect mmap */
- int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, void *priv);
-
void *ctx; /* iommu context: registres saved area */
u32 da_start;
u32 da_end;
@@ -81,25 +80,27 @@
struct iommu_functions {
unsigned long version;
- int (*enable)(struct iommu *obj);
- void (*disable)(struct iommu *obj);
- void (*set_twl)(struct iommu *obj, bool on);
- u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+ int (*enable)(struct omap_iommu *obj);
+ void (*disable)(struct omap_iommu *obj);
+ void (*set_twl)(struct omap_iommu *obj, bool on);
+ u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra);
- void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
- void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+ void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr);
+ void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr);
- struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+ struct cr_regs *(*alloc_cr)(struct omap_iommu *obj,
+ struct iotlb_entry *e);
int (*cr_valid)(struct cr_regs *cr);
u32 (*cr_to_virt)(struct cr_regs *cr);
void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
- ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+ ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr,
+ char *buf);
u32 (*get_pte_attr)(struct iotlb_entry *e);
- void (*save_ctx)(struct iommu *obj);
- void (*restore_ctx)(struct iommu *obj);
- ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
+ void (*save_ctx)(struct omap_iommu *obj);
+ void (*restore_ctx)(struct omap_iommu *obj);
+ ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
};
struct iommu_platform_data {
@@ -150,40 +151,31 @@
/*
* global functions
*/
-extern u32 iommu_arch_version(void);
+extern u32 omap_iommu_arch_version(void);
-extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
-extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
-extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
-extern void iommu_set_twl(struct iommu *obj, bool on);
-extern void flush_iotlb_page(struct iommu *obj, u32 da);
-extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
-extern void flush_iotlb_all(struct iommu *obj);
+extern int
+omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e);
-extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
-extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd,
- u32 **ppte);
-extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
-
-extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end);
-extern struct iommu *iommu_get(const char *name);
-extern void iommu_put(struct iommu *obj);
-extern int iommu_set_isr(const char *name,
- int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs,
+extern int omap_iommu_set_isr(const char *name,
+ int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs,
void *priv),
void *isr_priv);
-extern void iommu_save_ctx(struct iommu *obj);
-extern void iommu_restore_ctx(struct iommu *obj);
+extern void omap_iommu_save_ctx(struct omap_iommu *obj);
+extern void omap_iommu_restore_ctx(struct omap_iommu *obj);
-extern int install_iommu_arch(const struct iommu_functions *ops);
-extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+extern int omap_install_iommu_arch(const struct iommu_functions *ops);
+extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
-extern int foreach_iommu_device(void *data,
+extern int omap_foreach_iommu_device(void *data,
int (*fn)(struct device *, void *));
-extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
-extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
+extern ssize_t
+omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
+extern size_t
+omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
+struct device *omap_find_iommu_device(const char *name);
#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
index 10ad05f..d4116b59 100644
--- a/arch/arm/plat-omap/include/plat/iommu2.h
+++ b/arch/arm/plat-omap/include/plat/iommu2.h
@@ -83,12 +83,12 @@
/*
* register accessors
*/
-static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
{
return __raw_readl(obj->regbase + offs);
}
-static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
{
__raw_writel(val, obj->regbase + offs);
}
diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h
new file mode 100644
index 0000000..66a8139
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/iopgtable.h
@@ -0,0 +1,120 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+/*
+ * "L2 table" address mask and size definitions.
+ */
+#define IOPGD_SHIFT 20
+#define IOPGD_SIZE (1UL << IOPGD_SHIFT)
+#define IOPGD_MASK (~(IOPGD_SIZE - 1))
+
+/*
+ * "section" address mask and size definitions.
+ */
+#define IOSECTION_SHIFT 20
+#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT)
+#define IOSECTION_MASK (~(IOSECTION_SIZE - 1))
+
+/*
+ * "supersection" address mask and size definitions.
+ */
+#define IOSUPER_SHIFT 24
+#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT)
+#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
+
+#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
+
+/*
+ * "small page" address mask and size definitions.
+ */
+#define IOPTE_SHIFT 12
+#define IOPTE_SIZE (1UL << IOPTE_SHIFT)
+#define IOPTE_MASK (~(IOPTE_SIZE - 1))
+
+/*
+ * "large page" address mask and size definitions.
+ */
+#define IOLARGE_SHIFT 16
+#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT)
+#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
+
+#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOPAGE_MASK IOPTE_MASK
+
+/**
+ * omap_iommu_translate() - va to pa translation
+ * @d: omap iommu descriptor
+ * @va: virtual address
+ * @mask: omap iommu descriptor mask
+ *
+ * va to pa translation
+ */
+static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask)
+{
+ return (d & mask) | (va & (~mask));
+}
+
+/*
+ * some descriptor attributes.
+ */
+#define IOPGD_TABLE (1 << 0)
+#define IOPGD_SECTION (2 << 0)
+#define IOPGD_SUPER (1 << 18 | 2 << 0)
+
+#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE)
+#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION)
+#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER)
+
+#define IOPTE_SMALL (2 << 0)
+#define IOPTE_LARGE (1 << 0)
+
+#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL)
+#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE)
+
+/* to find an entry in a page-table-directory */
+#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da))
+
+#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
+#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
+
+/* to find an entry in the second-level page table. */
+#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+ u32 flags)
+{
+ memset(e, 0, sizeof(*e));
+
+ e->da = da;
+ e->pa = pa;
+ e->valid = 1;
+ /* FIXME: add OMAP1 support */
+ e->pgsz = flags & MMU_CAM_PGSZ_MASK;
+ e->endian = flags & MMU_RAM_ENDIAN_MASK;
+ e->elsz = flags & MMU_RAM_ELSZ_MASK;
+ e->mixed = flags & MMU_RAM_MIXED_MASK;
+
+ return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev) \
+ (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index e992b96..6af1a91 100644
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -13,8 +13,10 @@
#ifndef __IOMMU_MMAP_H
#define __IOMMU_MMAP_H
+#include <linux/iommu.h>
+
struct iovm_struct {
- struct iommu *iommu; /* iommu object which this belongs to */
+ struct omap_iommu *iommu; /* iommu object which this belongs to */
u32 da_start; /* area definition */
u32 da_end;
u32 flags; /* IOVMF_: see below */
@@ -70,20 +72,18 @@
#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
-extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
-extern u32 iommu_vmap(struct iommu *obj, u32 da,
+extern struct iovm_struct *omap_find_iovm_area(struct omap_iommu *obj, u32 da);
+extern u32
+omap_iommu_vmap(struct iommu_domain *domain, struct omap_iommu *obj, u32 da,
const struct sg_table *sgt, u32 flags);
-extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
-extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
- u32 flags);
-extern void iommu_vfree(struct iommu *obj, const u32 da);
-extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
- u32 flags);
-extern void iommu_kunmap(struct iommu *obj, u32 da);
-extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
- u32 flags);
-extern void iommu_kfree(struct iommu *obj, u32 da);
-
-extern void *da_to_va(struct iommu *obj, u32 da);
+extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
+ struct omap_iommu *obj, u32 da);
+extern u32
+omap_iommu_vmalloc(struct iommu_domain *domain, struct omap_iommu *obj,
+ u32 da, size_t bytes, u32 flags);
+extern void
+omap_iommu_vfree(struct iommu_domain *domain, struct omap_iommu *obj,
+ const u32 da);
+extern void *omap_da_to_va(struct omap_iommu *obj, u32 da);
#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 9882c65..8fa74e2 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -25,9 +25,7 @@
#define __ASM_ARCH_OMAP_MCBSP_H
#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <plat/clock.h>
+#include <linux/clk.h>
/* macro for building platform_device for McBSP ports */
#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
@@ -40,104 +38,60 @@
#define MCBSP_CONFIG_TYPE3 0x3
#define MCBSP_CONFIG_TYPE4 0x4
-#define OMAP7XX_MCBSP1_BASE 0xfffb1000
-#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+/* McBSP register numbers. Register address offset = num * reg_step */
+enum {
+ /* Common registers */
+ OMAP_MCBSP_REG_SPCR2 = 4,
+ OMAP_MCBSP_REG_SPCR1,
+ OMAP_MCBSP_REG_RCR2,
+ OMAP_MCBSP_REG_RCR1,
+ OMAP_MCBSP_REG_XCR2,
+ OMAP_MCBSP_REG_XCR1,
+ OMAP_MCBSP_REG_SRGR2,
+ OMAP_MCBSP_REG_SRGR1,
+ OMAP_MCBSP_REG_MCR2,
+ OMAP_MCBSP_REG_MCR1,
+ OMAP_MCBSP_REG_RCERA,
+ OMAP_MCBSP_REG_RCERB,
+ OMAP_MCBSP_REG_XCERA,
+ OMAP_MCBSP_REG_XCERB,
+ OMAP_MCBSP_REG_PCR0,
+ OMAP_MCBSP_REG_RCERC,
+ OMAP_MCBSP_REG_RCERD,
+ OMAP_MCBSP_REG_XCERC,
+ OMAP_MCBSP_REG_XCERD,
+ OMAP_MCBSP_REG_RCERE,
+ OMAP_MCBSP_REG_RCERF,
+ OMAP_MCBSP_REG_XCERE,
+ OMAP_MCBSP_REG_XCERF,
+ OMAP_MCBSP_REG_RCERG,
+ OMAP_MCBSP_REG_RCERH,
+ OMAP_MCBSP_REG_XCERG,
+ OMAP_MCBSP_REG_XCERH,
-#define OMAP1510_MCBSP1_BASE 0xe1011800
-#define OMAP1510_MCBSP2_BASE 0xfffb1000
-#define OMAP1510_MCBSP3_BASE 0xe1017000
+ /* OMAP1-OMAP2420 registers */
+ OMAP_MCBSP_REG_DRR2 = 0,
+ OMAP_MCBSP_REG_DRR1,
+ OMAP_MCBSP_REG_DXR2,
+ OMAP_MCBSP_REG_DXR1,
-#define OMAP1610_MCBSP1_BASE 0xe1011800
-#define OMAP1610_MCBSP2_BASE 0xfffb1000
-#define OMAP1610_MCBSP3_BASE 0xe1017000
+ /* OMAP2430 and onwards */
+ OMAP_MCBSP_REG_DRR = 0,
+ OMAP_MCBSP_REG_DXR = 2,
+ OMAP_MCBSP_REG_SYSCON = 35,
+ OMAP_MCBSP_REG_THRSH2,
+ OMAP_MCBSP_REG_THRSH1,
+ OMAP_MCBSP_REG_IRQST = 40,
+ OMAP_MCBSP_REG_IRQEN,
+ OMAP_MCBSP_REG_WAKEUPEN,
+ OMAP_MCBSP_REG_XCCR,
+ OMAP_MCBSP_REG_RCCR,
+ OMAP_MCBSP_REG_XBUFFSTAT,
+ OMAP_MCBSP_REG_RBUFFSTAT,
+ OMAP_MCBSP_REG_SSELCR,
+};
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x02
-#define OMAP_MCBSP_REG_DXR2 0x04
-#define OMAP_MCBSP_REG_DXR1 0x06
-#define OMAP_MCBSP_REG_DRR 0x02
-#define OMAP_MCBSP_REG_DXR 0x06
-#define OMAP_MCBSP_REG_SPCR2 0x08
-#define OMAP_MCBSP_REG_SPCR1 0x0a
-#define OMAP_MCBSP_REG_RCR2 0x0c
-#define OMAP_MCBSP_REG_RCR1 0x0e
-#define OMAP_MCBSP_REG_XCR2 0x10
-#define OMAP_MCBSP_REG_XCR1 0x12
-#define OMAP_MCBSP_REG_SRGR2 0x14
-#define OMAP_MCBSP_REG_SRGR1 0x16
-#define OMAP_MCBSP_REG_MCR2 0x18
-#define OMAP_MCBSP_REG_MCR1 0x1a
-#define OMAP_MCBSP_REG_RCERA 0x1c
-#define OMAP_MCBSP_REG_RCERB 0x1e
-#define OMAP_MCBSP_REG_XCERA 0x20
-#define OMAP_MCBSP_REG_XCERB 0x22
-#define OMAP_MCBSP_REG_PCR0 0x24
-#define OMAP_MCBSP_REG_RCERC 0x26
-#define OMAP_MCBSP_REG_RCERD 0x28
-#define OMAP_MCBSP_REG_XCERC 0x2A
-#define OMAP_MCBSP_REG_XCERD 0x2C
-#define OMAP_MCBSP_REG_RCERE 0x2E
-#define OMAP_MCBSP_REG_RCERF 0x30
-#define OMAP_MCBSP_REG_XCERE 0x32
-#define OMAP_MCBSP_REG_XCERF 0x34
-#define OMAP_MCBSP_REG_RCERG 0x36
-#define OMAP_MCBSP_REG_RCERH 0x38
-#define OMAP_MCBSP_REG_XCERG 0x3A
-#define OMAP_MCBSP_REG_XCERH 0x3C
-
-/* Dummy defines, these are not available on omap1 */
-#define OMAP_MCBSP_REG_XCCR 0x00
-#define OMAP_MCBSP_REG_RCCR 0x00
-
-#else
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x04
-#define OMAP_MCBSP_REG_DXR2 0x08
-#define OMAP_MCBSP_REG_DXR1 0x0C
-#define OMAP_MCBSP_REG_DRR 0x00
-#define OMAP_MCBSP_REG_DXR 0x08
-#define OMAP_MCBSP_REG_SPCR2 0x10
-#define OMAP_MCBSP_REG_SPCR1 0x14
-#define OMAP_MCBSP_REG_RCR2 0x18
-#define OMAP_MCBSP_REG_RCR1 0x1C
-#define OMAP_MCBSP_REG_XCR2 0x20
-#define OMAP_MCBSP_REG_XCR1 0x24
-#define OMAP_MCBSP_REG_SRGR2 0x28
-#define OMAP_MCBSP_REG_SRGR1 0x2C
-#define OMAP_MCBSP_REG_MCR2 0x30
-#define OMAP_MCBSP_REG_MCR1 0x34
-#define OMAP_MCBSP_REG_RCERA 0x38
-#define OMAP_MCBSP_REG_RCERB 0x3C
-#define OMAP_MCBSP_REG_XCERA 0x40
-#define OMAP_MCBSP_REG_XCERB 0x44
-#define OMAP_MCBSP_REG_PCR0 0x48
-#define OMAP_MCBSP_REG_RCERC 0x4C
-#define OMAP_MCBSP_REG_RCERD 0x50
-#define OMAP_MCBSP_REG_XCERC 0x54
-#define OMAP_MCBSP_REG_XCERD 0x58
-#define OMAP_MCBSP_REG_RCERE 0x5C
-#define OMAP_MCBSP_REG_RCERF 0x60
-#define OMAP_MCBSP_REG_XCERE 0x64
-#define OMAP_MCBSP_REG_XCERF 0x68
-#define OMAP_MCBSP_REG_RCERG 0x6C
-#define OMAP_MCBSP_REG_RCERH 0x70
-#define OMAP_MCBSP_REG_XCERG 0x74
-#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MCBSP_REG_SYSCON 0x8C
-#define OMAP_MCBSP_REG_THRSH2 0x90
-#define OMAP_MCBSP_REG_THRSH1 0x94
-#define OMAP_MCBSP_REG_IRQST 0xA0
-#define OMAP_MCBSP_REG_IRQEN 0xA4
-#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
-#define OMAP_MCBSP_REG_XCCR 0xAC
-#define OMAP_MCBSP_REG_RCCR 0xB0
-#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4
-#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8
-#define OMAP_MCBSP_REG_SSELCR 0xBC
-
+/* OMAP3 sidetone control registers */
#define OMAP_ST_REG_REV 0x00
#define OMAP_ST_REG_SYSCONFIG 0x10
#define OMAP_ST_REG_IRQSTATUS 0x18
@@ -146,8 +100,6 @@
#define OMAP_ST_REG_SFIRCR 0x28
#define OMAP_ST_REG_SSELCR 0x2C
-#endif
-
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -344,20 +296,20 @@
struct omap_mcbsp_ops {
void (*request)(unsigned int);
void (*free)(unsigned int);
- int (*set_clks_src)(u8, u8);
};
struct omap_mcbsp_platform_data {
- unsigned long phys_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP3
- /* Sidetone block for McBSP 2 and 3 */
- unsigned long phys_base_st;
-#endif
u16 buffer_size;
- unsigned int mcbsp_config_type;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
struct omap_mcbsp_st_data {
@@ -389,14 +341,12 @@
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP3
struct omap_mcbsp_st_data *st_data;
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
-#endif
void *reg_cache;
- unsigned int mcbsp_config_type;
+ int reg_cache_size;
};
/**
@@ -408,16 +358,10 @@
};
extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count, omap_mcbsp_cache_size;
-
-#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
+extern int omap_mcbsp_count;
int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
@@ -426,18 +370,6 @@
u16 omap_mcbsp_get_tx_delay(unsigned int id);
u16 omap_mcbsp_get_rx_delay(unsigned int id);
int omap_mcbsp_get_dma_op_mode(unsigned int id);
-#else
-static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
-static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
-#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
void omap_mcbsp_start(unsigned int id, int tx, int rx);
@@ -453,21 +385,11 @@
int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
-#ifdef CONFIG_ARCH_OMAP3
/* Sidetone specific API */
int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
int omap_st_enable(unsigned int id);
int omap_st_disable(unsigned int id);
int omap_st_is_enabled(unsigned int id);
-#else
-static inline int omap_st_set_chgain(unsigned int id, int channel,
- s16 chgain) { return 0; }
-static inline int omap_st_get_chgain(unsigned int id, int channel,
- s16 *chgain) { return 0; }
-static inline int omap_st_enable(unsigned int id) { return 0; }
-static inline int omap_st_disable(unsigned int id) { return 0; }
-static inline int omap_st_is_enabled(unsigned int id) { return 0; }
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
deleted file mode 100644
index e6720aa..0000000
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-#endif
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET UL(0x30000000)
-
-#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn) \
- ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
- if (is_lbus_device(dev)) \
- __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
- __dma; })
-
-#define __arch_dma_to_pfn(dev, addr) \
- ({ dma_addr_t __dma = addr; \
- if (is_lbus_device(dev)) \
- __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
- __phys_to_pfn(__dma); \
- })
-
-#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
- lbus_to_virt(addr) : \
- __phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
- (dma_addr_t) (is_lbus_device(dev) ? \
- virt_to_lbus(__addr) : \
- __virt_to_phys(__addr)); })
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
- (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index c7b8741..94cf70a 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -31,7 +31,24 @@
#define OMAP_MMC_MAX_SLOTS 2
-#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1)
+/*
+ * struct omap_mmc_dev_attr.flags possibilities
+ *
+ * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
+ * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
+ * should be set if this is the case. See for example Section 22.5.3
+ * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
+ * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
+ *
+ * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
+ * don't work correctly on some MMC controller instances on some
+ * OMAP3 SoCs; this flag should be set if this is the case. See
+ * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
+ * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
+ * Revision F (October 2010) (SPRZ278F).
+ */
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
+#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
struct omap_mmc_dev_attr {
u8 flags;
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index ee405b36..12c5b0c 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -68,7 +68,7 @@
*
*/
struct omap_device {
- struct platform_device pdev;
+ struct platform_device *pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
@@ -88,25 +88,20 @@
/* Core code interface */
-int omap_device_count_resources(struct omap_device *od);
-int omap_device_fill_resources(struct omap_device *od, struct resource *res);
-
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-int omap_device_register(struct omap_device *od);
-int omap_early_device_register(struct omap_device *od);
-
void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
@@ -122,11 +117,6 @@
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
-static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
-{
- od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
/*
* Entries should be kept in latency order ascending
*
@@ -157,6 +147,17 @@
#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
/* Get omap_device pointer from platform_device pointer */
-#define to_omap_device(x) container_of((x), struct omap_device, pdev)
+static inline struct omap_device *to_omap_device(struct platform_device *pdev)
+{
+ return pdev ? pdev->archdata.od : NULL;
+}
+
+static inline
+void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
+{
+ struct omap_device *od = to_omap_device(pdev);
+
+ od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0e329ca..5419f1a 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -496,7 +496,6 @@
* @_state: internal-use hwmod state
* @_postsetup_state: internal-use state to leave the hwmod in after _setup()
* @flags: hwmod flags (documented below)
- * @omap_chip: OMAP chips this hwmod is present on
* @_lock: spinlock serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
*
@@ -526,7 +525,6 @@
char *clkdm_name;
struct clockdomain *clkdm;
char *vdd_name;
- struct voltagedomain *voltdm;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
@@ -545,7 +543,6 @@
u8 _int_flags;
u8 _state;
u8 _postsetup_state;
- const struct omap_chip_id omap_chip;
};
int omap_hwmod_register(struct omap_hwmod **ohs);
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index de3b10c..1ab9fd6 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -16,8 +16,8 @@
#include <linux/init.h>
/*
- * Memory entry used for the DEBUG_LL UART configuration. See also
- * uncompress.h and debug-macro.S.
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
*
* Note that using a memory location for storing the UART configuration
* has at least two limitations:
@@ -27,7 +27,7 @@
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
-#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc)
+#define OMAP_UART_INFO_OFS 0x3ffc
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index a067484..2f472e9 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -36,7 +36,13 @@
*/
static void set_omap_uart_info(unsigned char port)
{
- *(volatile u32 *)OMAP_UART_INFO = port;
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
}
static void putc(int c)
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
new file mode 100644
index 0000000..0a6a482
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -0,0 +1,20 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+
+#endif
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index f1ecfa9..333871f 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <plat/omap7xx.h>
#include <plat/omap1510.h>
@@ -23,11 +24,16 @@
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
+static int initialized;
+
/*
* Intercept ioremap() requests for addresses in our fixed mapping regions.
*/
void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
{
+
+ WARN(!initialized, "Do not use ioremap before init_early\n");
+
#ifdef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap1()) {
if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
@@ -139,3 +145,15 @@
__iounmap(addr);
}
EXPORT_SYMBOL(omap_iounmap);
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+ init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
+
+void __init omap_ioremap_init(void)
+{
+ initialized++;
+}
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
deleted file mode 100644
index f07cf2f..0000000
--- a/arch/arm/plat-omap/iommu-debug.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- * omap iommu: debugfs interface
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-#include <linux/platform_device.h>
-#include <linux/debugfs.h>
-
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
-
-#include "iopgtable.h"
-
-#define MAXCOLUMN 100 /* for short messages */
-
-static DEFINE_MUTEX(iommu_debug_lock);
-
-static struct dentry *iommu_debug_root;
-
-static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- u32 ver = iommu_arch_version();
- char buf[MAXCOLUMN], *p = buf;
-
- p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf);
-
- return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
-}
-
-static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct iommu *obj = file->private_data;
- char *p, *buf;
- ssize_t bytes;
-
- buf = kmalloc(count, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- p = buf;
-
- mutex_lock(&iommu_debug_lock);
-
- bytes = iommu_dump_ctx(obj, p, count);
- bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
-
- mutex_unlock(&iommu_debug_lock);
- kfree(buf);
-
- return bytes;
-}
-
-static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct iommu *obj = file->private_data;
- char *p, *buf;
- ssize_t bytes, rest;
-
- buf = kmalloc(count, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- p = buf;
-
- mutex_lock(&iommu_debug_lock);
-
- p += sprintf(p, "%8s %8s\n", "cam:", "ram:");
- p += sprintf(p, "-----------------------------------------\n");
- rest = count - (p - buf);
- p += dump_tlb_entries(obj, p, rest);
-
- bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
-
- mutex_unlock(&iommu_debug_lock);
- kfree(buf);
-
- return bytes;
-}
-
-static ssize_t debug_write_pagetable(struct file *file,
- const char __user *userbuf, size_t count, loff_t *ppos)
-{
- struct iotlb_entry e;
- struct cr_regs cr;
- int err;
- struct iommu *obj = file->private_data;
- char buf[MAXCOLUMN], *p = buf;
-
- count = min(count, sizeof(buf));
-
- mutex_lock(&iommu_debug_lock);
- if (copy_from_user(p, userbuf, count)) {
- mutex_unlock(&iommu_debug_lock);
- return -EFAULT;
- }
-
- sscanf(p, "%x %x", &cr.cam, &cr.ram);
- if (!cr.cam || !cr.ram) {
- mutex_unlock(&iommu_debug_lock);
- return -EINVAL;
- }
-
- iotlb_cr_to_e(&cr, &e);
- err = iopgtable_store_entry(obj, &e);
- if (err)
- dev_err(obj->dev, "%s: fail to store cr\n", __func__);
-
- mutex_unlock(&iommu_debug_lock);
- return count;
-}
-
-#define dump_ioptable_entry_one(lv, da, val) \
- ({ \
- int __err = 0; \
- ssize_t bytes; \
- const int maxcol = 22; \
- const char *str = "%d: %08x %08x\n"; \
- bytes = snprintf(p, maxcol, str, lv, da, val); \
- p += bytes; \
- len -= bytes; \
- if (len < maxcol) \
- __err = -ENOMEM; \
- __err; \
- })
-
-static ssize_t dump_ioptable(struct iommu *obj, char *buf, ssize_t len)
-{
- int i;
- u32 *iopgd;
- char *p = buf;
-
- spin_lock(&obj->page_table_lock);
-
- iopgd = iopgd_offset(obj, 0);
- for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) {
- int j, err;
- u32 *iopte;
- u32 da;
-
- if (!*iopgd)
- continue;
-
- if (!(*iopgd & IOPGD_TABLE)) {
- da = i << IOPGD_SHIFT;
-
- err = dump_ioptable_entry_one(1, da, *iopgd);
- if (err)
- goto out;
- continue;
- }
-
- iopte = iopte_offset(iopgd, 0);
-
- for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) {
- if (!*iopte)
- continue;
-
- da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT);
- err = dump_ioptable_entry_one(2, da, *iopgd);
- if (err)
- goto out;
- }
- }
-out:
- spin_unlock(&obj->page_table_lock);
-
- return p - buf;
-}
-
-static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct iommu *obj = file->private_data;
- char *p, *buf;
- size_t bytes;
-
- buf = (char *)__get_free_page(GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- p = buf;
-
- p += sprintf(p, "L: %8s %8s\n", "da:", "pa:");
- p += sprintf(p, "-----------------------------------------\n");
-
- mutex_lock(&iommu_debug_lock);
-
- bytes = PAGE_SIZE - (p - buf);
- p += dump_ioptable(obj, p, bytes);
-
- bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
-
- mutex_unlock(&iommu_debug_lock);
- free_page((unsigned long)buf);
-
- return bytes;
-}
-
-static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct iommu *obj = file->private_data;
- char *p, *buf;
- struct iovm_struct *tmp;
- int uninitialized_var(i);
- ssize_t bytes;
-
- buf = (char *)__get_free_page(GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- p = buf;
-
- p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n",
- "No", "start", "end", "size", "flags");
- p += sprintf(p, "-------------------------------------------------\n");
-
- mutex_lock(&iommu_debug_lock);
-
- list_for_each_entry(tmp, &obj->mmap, list) {
- size_t len;
- const char *str = "%3d %08x-%08x %6x %8x\n";
- const int maxcol = 39;
-
- len = tmp->da_end - tmp->da_start;
- p += snprintf(p, maxcol, str,
- i, tmp->da_start, tmp->da_end, len, tmp->flags);
-
- if (PAGE_SIZE - (p - buf) < maxcol)
- break;
- i++;
- }
-
- bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
-
- mutex_unlock(&iommu_debug_lock);
- free_page((unsigned long)buf);
-
- return bytes;
-}
-
-static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct iommu *obj = file->private_data;
- char *p, *buf;
- struct iovm_struct *area;
- ssize_t bytes;
-
- count = min_t(ssize_t, count, PAGE_SIZE);
-
- buf = (char *)__get_free_page(GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- p = buf;
-
- mutex_lock(&iommu_debug_lock);
-
- area = find_iovm_area(obj, (u32)ppos);
- if (IS_ERR(area)) {
- bytes = -EINVAL;
- goto err_out;
- }
- memcpy(p, area->va, count);
- p += count;
-
- bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
-err_out:
- mutex_unlock(&iommu_debug_lock);
- free_page((unsigned long)buf);
-
- return bytes;
-}
-
-static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct iommu *obj = file->private_data;
- struct iovm_struct *area;
- char *p, *buf;
-
- count = min_t(size_t, count, PAGE_SIZE);
-
- buf = (char *)__get_free_page(GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- p = buf;
-
- mutex_lock(&iommu_debug_lock);
-
- if (copy_from_user(p, userbuf, count)) {
- count = -EFAULT;
- goto err_out;
- }
-
- area = find_iovm_area(obj, (u32)ppos);
- if (IS_ERR(area)) {
- count = -EINVAL;
- goto err_out;
- }
- memcpy(area->va, p, count);
-err_out:
- mutex_unlock(&iommu_debug_lock);
- free_page((unsigned long)buf);
-
- return count;
-}
-
-static int debug_open_generic(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-#define DEBUG_FOPS(name) \
- static const struct file_operations debug_##name##_fops = { \
- .open = debug_open_generic, \
- .read = debug_read_##name, \
- .write = debug_write_##name, \
- .llseek = generic_file_llseek, \
- };
-
-#define DEBUG_FOPS_RO(name) \
- static const struct file_operations debug_##name##_fops = { \
- .open = debug_open_generic, \
- .read = debug_read_##name, \
- .llseek = generic_file_llseek, \
- };
-
-DEBUG_FOPS_RO(ver);
-DEBUG_FOPS_RO(regs);
-DEBUG_FOPS_RO(tlb);
-DEBUG_FOPS(pagetable);
-DEBUG_FOPS_RO(mmap);
-DEBUG_FOPS(mem);
-
-#define __DEBUG_ADD_FILE(attr, mode) \
- { \
- struct dentry *dent; \
- dent = debugfs_create_file(#attr, mode, parent, \
- obj, &debug_##attr##_fops); \
- if (!dent) \
- return -ENOMEM; \
- }
-
-#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600)
-#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400)
-
-static int iommu_debug_register(struct device *dev, void *data)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct iommu *obj = platform_get_drvdata(pdev);
- struct dentry *d, *parent;
-
- if (!obj || !obj->dev)
- return -EINVAL;
-
- d = debugfs_create_dir(obj->name, iommu_debug_root);
- if (!d)
- return -ENOMEM;
- parent = d;
-
- d = debugfs_create_u8("nr_tlb_entries", 400, parent,
- (u8 *)&obj->nr_tlb_entries);
- if (!d)
- return -ENOMEM;
-
- DEBUG_ADD_FILE_RO(ver);
- DEBUG_ADD_FILE_RO(regs);
- DEBUG_ADD_FILE_RO(tlb);
- DEBUG_ADD_FILE(pagetable);
- DEBUG_ADD_FILE_RO(mmap);
- DEBUG_ADD_FILE(mem);
-
- return 0;
-}
-
-static int __init iommu_debug_init(void)
-{
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("iommu", NULL);
- if (!d)
- return -ENOMEM;
- iommu_debug_root = d;
-
- err = foreach_iommu_device(d, iommu_debug_register);
- if (err)
- goto err_out;
- return 0;
-
-err_out:
- debugfs_remove_recursive(iommu_debug_root);
- return err;
-}
-module_init(iommu_debug_init)
-
-static void __exit iommu_debugfs_exit(void)
-{
- debugfs_remove_recursive(iommu_debug_root);
-}
-module_exit(iommu_debugfs_exit)
-
-MODULE_DESCRIPTION("omap iommu: debugfs interface");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
deleted file mode 100644
index 34fc31ee..0000000
--- a/arch/arm/plat-omap/iommu.c
+++ /dev/null
@@ -1,1102 +0,0 @@
-/*
- * omap iommu: tlb and pagetable primitives
- *
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
- * Paul Mundt and Toshihiro Kobayashi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-
-#include <asm/cacheflush.h>
-
-#include <plat/iommu.h>
-
-#include "iopgtable.h"
-
-#define for_each_iotlb_cr(obj, n, __i, cr) \
- for (__i = 0; \
- (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true); \
- __i++)
-
-/* accommodate the difference between omap1 and omap2/3 */
-static const struct iommu_functions *arch_iommu;
-
-static struct platform_driver omap_iommu_driver;
-static struct kmem_cache *iopte_cachep;
-
-/**
- * install_iommu_arch - Install archtecure specific iommu functions
- * @ops: a pointer to architecture specific iommu functions
- *
- * There are several kind of iommu algorithm(tlb, pagetable) among
- * omap series. This interface installs such an iommu algorighm.
- **/
-int install_iommu_arch(const struct iommu_functions *ops)
-{
- if (arch_iommu)
- return -EBUSY;
-
- arch_iommu = ops;
- return 0;
-}
-EXPORT_SYMBOL_GPL(install_iommu_arch);
-
-/**
- * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
- * @ops: a pointer to architecture specific iommu functions
- *
- * This interface uninstalls the iommu algorighm installed previously.
- **/
-void uninstall_iommu_arch(const struct iommu_functions *ops)
-{
- if (arch_iommu != ops)
- pr_err("%s: not your arch\n", __func__);
-
- arch_iommu = NULL;
-}
-EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
-
-/**
- * iommu_save_ctx - Save registers for pm off-mode support
- * @obj: target iommu
- **/
-void iommu_save_ctx(struct iommu *obj)
-{
- arch_iommu->save_ctx(obj);
-}
-EXPORT_SYMBOL_GPL(iommu_save_ctx);
-
-/**
- * iommu_restore_ctx - Restore registers for pm off-mode support
- * @obj: target iommu
- **/
-void iommu_restore_ctx(struct iommu *obj)
-{
- arch_iommu->restore_ctx(obj);
-}
-EXPORT_SYMBOL_GPL(iommu_restore_ctx);
-
-/**
- * iommu_arch_version - Return running iommu arch version
- **/
-u32 iommu_arch_version(void)
-{
- return arch_iommu->version;
-}
-EXPORT_SYMBOL_GPL(iommu_arch_version);
-
-static int iommu_enable(struct iommu *obj)
-{
- int err;
-
- if (!obj)
- return -EINVAL;
-
- if (!arch_iommu)
- return -ENODEV;
-
- clk_enable(obj->clk);
-
- err = arch_iommu->enable(obj);
-
- clk_disable(obj->clk);
- return err;
-}
-
-static void iommu_disable(struct iommu *obj)
-{
- if (!obj)
- return;
-
- clk_enable(obj->clk);
-
- arch_iommu->disable(obj);
-
- clk_disable(obj->clk);
-}
-
-/*
- * TLB operations
- */
-void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
-{
- BUG_ON(!cr || !e);
-
- arch_iommu->cr_to_e(cr, e);
-}
-EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
-
-static inline int iotlb_cr_valid(struct cr_regs *cr)
-{
- if (!cr)
- return -EINVAL;
-
- return arch_iommu->cr_valid(cr);
-}
-
-static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
- struct iotlb_entry *e)
-{
- if (!e)
- return NULL;
-
- return arch_iommu->alloc_cr(obj, e);
-}
-
-u32 iotlb_cr_to_virt(struct cr_regs *cr)
-{
- return arch_iommu->cr_to_virt(cr);
-}
-EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
-
-static u32 get_iopte_attr(struct iotlb_entry *e)
-{
- return arch_iommu->get_pte_attr(e);
-}
-
-static u32 iommu_report_fault(struct iommu *obj, u32 *da)
-{
- return arch_iommu->fault_isr(obj, da);
-}
-
-static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
-{
- u32 val;
-
- val = iommu_read_reg(obj, MMU_LOCK);
-
- l->base = MMU_LOCK_BASE(val);
- l->vict = MMU_LOCK_VICT(val);
-
-}
-
-static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
-{
- u32 val;
-
- val = (l->base << MMU_LOCK_BASE_SHIFT);
- val |= (l->vict << MMU_LOCK_VICT_SHIFT);
-
- iommu_write_reg(obj, val, MMU_LOCK);
-}
-
-static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
-{
- arch_iommu->tlb_read_cr(obj, cr);
-}
-
-static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
-{
- arch_iommu->tlb_load_cr(obj, cr);
-
- iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
- iommu_write_reg(obj, 1, MMU_LD_TLB);
-}
-
-/**
- * iotlb_dump_cr - Dump an iommu tlb entry into buf
- * @obj: target iommu
- * @cr: contents of cam and ram register
- * @buf: output buffer
- **/
-static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
- char *buf)
-{
- BUG_ON(!cr || !buf);
-
- return arch_iommu->dump_cr(obj, cr, buf);
-}
-
-/* only used in iotlb iteration for-loop */
-static struct cr_regs __iotlb_read_cr(struct iommu *obj, int n)
-{
- struct cr_regs cr;
- struct iotlb_lock l;
-
- iotlb_lock_get(obj, &l);
- l.vict = n;
- iotlb_lock_set(obj, &l);
- iotlb_read_cr(obj, &cr);
-
- return cr;
-}
-
-/**
- * load_iotlb_entry - Set an iommu tlb entry
- * @obj: target iommu
- * @e: an iommu tlb entry info
- **/
-int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
-{
- int err = 0;
- struct iotlb_lock l;
- struct cr_regs *cr;
-
- if (!obj || !obj->nr_tlb_entries || !e)
- return -EINVAL;
-
- clk_enable(obj->clk);
-
- iotlb_lock_get(obj, &l);
- if (l.base == obj->nr_tlb_entries) {
- dev_warn(obj->dev, "%s: preserve entries full\n", __func__);
- err = -EBUSY;
- goto out;
- }
- if (!e->prsvd) {
- int i;
- struct cr_regs tmp;
-
- for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp)
- if (!iotlb_cr_valid(&tmp))
- break;
-
- if (i == obj->nr_tlb_entries) {
- dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
- err = -EBUSY;
- goto out;
- }
-
- iotlb_lock_get(obj, &l);
- } else {
- l.vict = l.base;
- iotlb_lock_set(obj, &l);
- }
-
- cr = iotlb_alloc_cr(obj, e);
- if (IS_ERR(cr)) {
- clk_disable(obj->clk);
- return PTR_ERR(cr);
- }
-
- iotlb_load_cr(obj, cr);
- kfree(cr);
-
- if (e->prsvd)
- l.base++;
- /* increment victim for next tlb load */
- if (++l.vict == obj->nr_tlb_entries)
- l.vict = l.base;
- iotlb_lock_set(obj, &l);
-out:
- clk_disable(obj->clk);
- return err;
-}
-EXPORT_SYMBOL_GPL(load_iotlb_entry);
-
-/**
- * flush_iotlb_page - Clear an iommu tlb entry
- * @obj: target iommu
- * @da: iommu device virtual address
- *
- * Clear an iommu tlb entry which includes 'da' address.
- **/
-void flush_iotlb_page(struct iommu *obj, u32 da)
-{
- int i;
- struct cr_regs cr;
-
- clk_enable(obj->clk);
-
- for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
- u32 start;
- size_t bytes;
-
- if (!iotlb_cr_valid(&cr))
- continue;
-
- start = iotlb_cr_to_virt(&cr);
- bytes = iopgsz_to_bytes(cr.cam & 3);
-
- if ((start <= da) && (da < start + bytes)) {
- dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
- __func__, start, da, bytes);
- iotlb_load_cr(obj, &cr);
- iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
- }
- }
- clk_disable(obj->clk);
-
- if (i == obj->nr_tlb_entries)
- dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
-}
-EXPORT_SYMBOL_GPL(flush_iotlb_page);
-
-/**
- * flush_iotlb_range - Clear an iommu tlb entries
- * @obj: target iommu
- * @start: iommu device virtual address(start)
- * @end: iommu device virtual address(end)
- *
- * Clear an iommu tlb entry which includes 'da' address.
- **/
-void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
-{
- u32 da = start;
-
- while (da < end) {
- flush_iotlb_page(obj, da);
- /* FIXME: Optimize for multiple page size */
- da += IOPTE_SIZE;
- }
-}
-EXPORT_SYMBOL_GPL(flush_iotlb_range);
-
-/**
- * flush_iotlb_all - Clear all iommu tlb entries
- * @obj: target iommu
- **/
-void flush_iotlb_all(struct iommu *obj)
-{
- struct iotlb_lock l;
-
- clk_enable(obj->clk);
-
- l.base = 0;
- l.vict = 0;
- iotlb_lock_set(obj, &l);
-
- iommu_write_reg(obj, 1, MMU_GFLUSH);
-
- clk_disable(obj->clk);
-}
-EXPORT_SYMBOL_GPL(flush_iotlb_all);
-
-/**
- * iommu_set_twl - enable/disable table walking logic
- * @obj: target iommu
- * @on: enable/disable
- *
- * Function used to enable/disable TWL. If one wants to work
- * exclusively with locked TLB entries and receive notifications
- * for TLB miss then call this function to disable TWL.
- */
-void iommu_set_twl(struct iommu *obj, bool on)
-{
- clk_enable(obj->clk);
- arch_iommu->set_twl(obj, on);
- clk_disable(obj->clk);
-}
-EXPORT_SYMBOL_GPL(iommu_set_twl);
-
-#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
-
-ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
-{
- if (!obj || !buf)
- return -EINVAL;
-
- clk_enable(obj->clk);
-
- bytes = arch_iommu->dump_ctx(obj, buf, bytes);
-
- clk_disable(obj->clk);
-
- return bytes;
-}
-EXPORT_SYMBOL_GPL(iommu_dump_ctx);
-
-static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
-{
- int i;
- struct iotlb_lock saved;
- struct cr_regs tmp;
- struct cr_regs *p = crs;
-
- clk_enable(obj->clk);
- iotlb_lock_get(obj, &saved);
-
- for_each_iotlb_cr(obj, num, i, tmp) {
- if (!iotlb_cr_valid(&tmp))
- continue;
- *p++ = tmp;
- }
-
- iotlb_lock_set(obj, &saved);
- clk_disable(obj->clk);
-
- return p - crs;
-}
-
-/**
- * dump_tlb_entries - dump cr arrays to given buffer
- * @obj: target iommu
- * @buf: output buffer
- **/
-size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t bytes)
-{
- int i, num;
- struct cr_regs *cr;
- char *p = buf;
-
- num = bytes / sizeof(*cr);
- num = min(obj->nr_tlb_entries, num);
-
- cr = kcalloc(num, sizeof(*cr), GFP_KERNEL);
- if (!cr)
- return 0;
-
- num = __dump_tlb_entries(obj, cr, num);
- for (i = 0; i < num; i++)
- p += iotlb_dump_cr(obj, cr + i, p);
- kfree(cr);
-
- return p - buf;
-}
-EXPORT_SYMBOL_GPL(dump_tlb_entries);
-
-int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
-{
- return driver_for_each_device(&omap_iommu_driver.driver,
- NULL, data, fn);
-}
-EXPORT_SYMBOL_GPL(foreach_iommu_device);
-
-#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
-
-/*
- * H/W pagetable operations
- */
-static void flush_iopgd_range(u32 *first, u32 *last)
-{
- /* FIXME: L2 cache should be taken care of if it exists */
- do {
- asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd"
- : : "r" (first));
- first += L1_CACHE_BYTES / sizeof(*first);
- } while (first <= last);
-}
-
-static void flush_iopte_range(u32 *first, u32 *last)
-{
- /* FIXME: L2 cache should be taken care of if it exists */
- do {
- asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte"
- : : "r" (first));
- first += L1_CACHE_BYTES / sizeof(*first);
- } while (first <= last);
-}
-
-static void iopte_free(u32 *iopte)
-{
- /* Note: freed iopte's must be clean ready for re-use */
- kmem_cache_free(iopte_cachep, iopte);
-}
-
-static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
-{
- u32 *iopte;
-
- /* a table has already existed */
- if (*iopgd)
- goto pte_ready;
-
- /*
- * do the allocation outside the page table lock
- */
- spin_unlock(&obj->page_table_lock);
- iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
- spin_lock(&obj->page_table_lock);
-
- if (!*iopgd) {
- if (!iopte)
- return ERR_PTR(-ENOMEM);
-
- *iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
- flush_iopgd_range(iopgd, iopgd);
-
- dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
- } else {
- /* We raced, free the reduniovant table */
- iopte_free(iopte);
- }
-
-pte_ready:
- iopte = iopte_offset(iopgd, da);
-
- dev_vdbg(obj->dev,
- "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
- __func__, da, iopgd, *iopgd, iopte, *iopte);
-
- return iopte;
-}
-
-static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
-{
- u32 *iopgd = iopgd_offset(obj, da);
-
- if ((da | pa) & ~IOSECTION_MASK) {
- dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
- __func__, da, pa, IOSECTION_SIZE);
- return -EINVAL;
- }
-
- *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
- flush_iopgd_range(iopgd, iopgd);
- return 0;
-}
-
-static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
-{
- u32 *iopgd = iopgd_offset(obj, da);
- int i;
-
- if ((da | pa) & ~IOSUPER_MASK) {
- dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
- __func__, da, pa, IOSUPER_SIZE);
- return -EINVAL;
- }
-
- for (i = 0; i < 16; i++)
- *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
- flush_iopgd_range(iopgd, iopgd + 15);
- return 0;
-}
-
-static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
-{
- u32 *iopgd = iopgd_offset(obj, da);
- u32 *iopte = iopte_alloc(obj, iopgd, da);
-
- if (IS_ERR(iopte))
- return PTR_ERR(iopte);
-
- *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
- flush_iopte_range(iopte, iopte);
-
- dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
- __func__, da, pa, iopte, *iopte);
-
- return 0;
-}
-
-static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
-{
- u32 *iopgd = iopgd_offset(obj, da);
- u32 *iopte = iopte_alloc(obj, iopgd, da);
- int i;
-
- if ((da | pa) & ~IOLARGE_MASK) {
- dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
- __func__, da, pa, IOLARGE_SIZE);
- return -EINVAL;
- }
-
- if (IS_ERR(iopte))
- return PTR_ERR(iopte);
-
- for (i = 0; i < 16; i++)
- *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
- flush_iopte_range(iopte, iopte + 15);
- return 0;
-}
-
-static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
-{
- int (*fn)(struct iommu *, u32, u32, u32);
- u32 prot;
- int err;
-
- if (!obj || !e)
- return -EINVAL;
-
- switch (e->pgsz) {
- case MMU_CAM_PGSZ_16M:
- fn = iopgd_alloc_super;
- break;
- case MMU_CAM_PGSZ_1M:
- fn = iopgd_alloc_section;
- break;
- case MMU_CAM_PGSZ_64K:
- fn = iopte_alloc_large;
- break;
- case MMU_CAM_PGSZ_4K:
- fn = iopte_alloc_page;
- break;
- default:
- fn = NULL;
- BUG();
- break;
- }
-
- prot = get_iopte_attr(e);
-
- spin_lock(&obj->page_table_lock);
- err = fn(obj, e->da, e->pa, prot);
- spin_unlock(&obj->page_table_lock);
-
- return err;
-}
-
-/**
- * iopgtable_store_entry - Make an iommu pte entry
- * @obj: target iommu
- * @e: an iommu tlb entry info
- **/
-int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
-{
- int err;
-
- flush_iotlb_page(obj, e->da);
- err = iopgtable_store_entry_core(obj, e);
-#ifdef PREFETCH_IOTLB
- if (!err)
- load_iotlb_entry(obj, e);
-#endif
- return err;
-}
-EXPORT_SYMBOL_GPL(iopgtable_store_entry);
-
-/**
- * iopgtable_lookup_entry - Lookup an iommu pte entry
- * @obj: target iommu
- * @da: iommu device virtual address
- * @ppgd: iommu pgd entry pointer to be returned
- * @ppte: iommu pte entry pointer to be returned
- **/
-void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
-{
- u32 *iopgd, *iopte = NULL;
-
- iopgd = iopgd_offset(obj, da);
- if (!*iopgd)
- goto out;
-
- if (iopgd_is_table(*iopgd))
- iopte = iopte_offset(iopgd, da);
-out:
- *ppgd = iopgd;
- *ppte = iopte;
-}
-EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
-
-static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
-{
- size_t bytes;
- u32 *iopgd = iopgd_offset(obj, da);
- int nent = 1;
-
- if (!*iopgd)
- return 0;
-
- if (iopgd_is_table(*iopgd)) {
- int i;
- u32 *iopte = iopte_offset(iopgd, da);
-
- bytes = IOPTE_SIZE;
- if (*iopte & IOPTE_LARGE) {
- nent *= 16;
- /* rewind to the 1st entry */
- iopte = iopte_offset(iopgd, (da & IOLARGE_MASK));
- }
- bytes *= nent;
- memset(iopte, 0, nent * sizeof(*iopte));
- flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
-
- /*
- * do table walk to check if this table is necessary or not
- */
- iopte = iopte_offset(iopgd, 0);
- for (i = 0; i < PTRS_PER_IOPTE; i++)
- if (iopte[i])
- goto out;
-
- iopte_free(iopte);
- nent = 1; /* for the next L1 entry */
- } else {
- bytes = IOPGD_SIZE;
- if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
- nent *= 16;
- /* rewind to the 1st entry */
- iopgd = iopgd_offset(obj, (da & IOSUPER_MASK));
- }
- bytes *= nent;
- }
- memset(iopgd, 0, nent * sizeof(*iopgd));
- flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
-out:
- return bytes;
-}
-
-/**
- * iopgtable_clear_entry - Remove an iommu pte entry
- * @obj: target iommu
- * @da: iommu device virtual address
- **/
-size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
-{
- size_t bytes;
-
- spin_lock(&obj->page_table_lock);
-
- bytes = iopgtable_clear_entry_core(obj, da);
- flush_iotlb_page(obj, da);
-
- spin_unlock(&obj->page_table_lock);
-
- return bytes;
-}
-EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
-
-static void iopgtable_clear_entry_all(struct iommu *obj)
-{
- int i;
-
- spin_lock(&obj->page_table_lock);
-
- for (i = 0; i < PTRS_PER_IOPGD; i++) {
- u32 da;
- u32 *iopgd;
-
- da = i << IOPGD_SHIFT;
- iopgd = iopgd_offset(obj, da);
-
- if (!*iopgd)
- continue;
-
- if (iopgd_is_table(*iopgd))
- iopte_free(iopte_offset(iopgd, 0));
-
- *iopgd = 0;
- flush_iopgd_range(iopgd, iopgd);
- }
-
- flush_iotlb_all(obj);
-
- spin_unlock(&obj->page_table_lock);
-}
-
-/*
- * Device IOMMU generic operations
- */
-static irqreturn_t iommu_fault_handler(int irq, void *data)
-{
- u32 da, errs;
- u32 *iopgd, *iopte;
- struct iommu *obj = data;
-
- if (!obj->refcount)
- return IRQ_NONE;
-
- clk_enable(obj->clk);
- errs = iommu_report_fault(obj, &da);
- clk_disable(obj->clk);
- if (errs == 0)
- return IRQ_HANDLED;
-
- /* Fault callback or TLB/PTE Dynamic loading */
- if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv))
- return IRQ_HANDLED;
-
- iommu_disable(obj);
-
- iopgd = iopgd_offset(obj, da);
-
- if (!iopgd_is_table(*iopgd)) {
- dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p "
- "*pgd:px%08x\n", obj->name, errs, da, iopgd, *iopgd);
- return IRQ_NONE;
- }
-
- iopte = iopte_offset(iopgd, da);
-
- dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p *pgd:0x%08x "
- "pte:0x%p *pte:0x%08x\n", obj->name, errs, da, iopgd, *iopgd,
- iopte, *iopte);
-
- return IRQ_NONE;
-}
-
-static int device_match_by_alias(struct device *dev, void *data)
-{
- struct iommu *obj = to_iommu(dev);
- const char *name = data;
-
- pr_debug("%s: %s %s\n", __func__, obj->name, name);
-
- return strcmp(obj->name, name) == 0;
-}
-
-/**
- * iommu_set_da_range - Set a valid device address range
- * @obj: target iommu
- * @start Start of valid range
- * @end End of valid range
- **/
-int iommu_set_da_range(struct iommu *obj, u32 start, u32 end)
-{
-
- if (!obj)
- return -EFAULT;
-
- if (end < start || !PAGE_ALIGN(start | end))
- return -EINVAL;
-
- obj->da_start = start;
- obj->da_end = end;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(iommu_set_da_range);
-
-/**
- * iommu_get - Get iommu handler
- * @name: target iommu name
- **/
-struct iommu *iommu_get(const char *name)
-{
- int err = -ENOMEM;
- struct device *dev;
- struct iommu *obj;
-
- dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
- device_match_by_alias);
- if (!dev)
- return ERR_PTR(-ENODEV);
-
- obj = to_iommu(dev);
-
- mutex_lock(&obj->iommu_lock);
-
- if (obj->refcount++ == 0) {
- err = iommu_enable(obj);
- if (err)
- goto err_enable;
- flush_iotlb_all(obj);
- }
-
- if (!try_module_get(obj->owner))
- goto err_module;
-
- mutex_unlock(&obj->iommu_lock);
-
- dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
- return obj;
-
-err_module:
- if (obj->refcount == 1)
- iommu_disable(obj);
-err_enable:
- obj->refcount--;
- mutex_unlock(&obj->iommu_lock);
- return ERR_PTR(err);
-}
-EXPORT_SYMBOL_GPL(iommu_get);
-
-/**
- * iommu_put - Put back iommu handler
- * @obj: target iommu
- **/
-void iommu_put(struct iommu *obj)
-{
- if (!obj || IS_ERR(obj))
- return;
-
- mutex_lock(&obj->iommu_lock);
-
- if (--obj->refcount == 0)
- iommu_disable(obj);
-
- module_put(obj->owner);
-
- mutex_unlock(&obj->iommu_lock);
-
- dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
-}
-EXPORT_SYMBOL_GPL(iommu_put);
-
-int iommu_set_isr(const char *name,
- int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs,
- void *priv),
- void *isr_priv)
-{
- struct device *dev;
- struct iommu *obj;
-
- dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
- device_match_by_alias);
- if (!dev)
- return -ENODEV;
-
- obj = to_iommu(dev);
- mutex_lock(&obj->iommu_lock);
- if (obj->refcount != 0) {
- mutex_unlock(&obj->iommu_lock);
- return -EBUSY;
- }
- obj->isr = isr;
- obj->isr_priv = isr_priv;
- mutex_unlock(&obj->iommu_lock);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(iommu_set_isr);
-
-/*
- * OMAP Device MMU(IOMMU) detection
- */
-static int __devinit omap_iommu_probe(struct platform_device *pdev)
-{
- int err = -ENODEV;
- void *p;
- int irq;
- struct iommu *obj;
- struct resource *res;
- struct iommu_platform_data *pdata = pdev->dev.platform_data;
-
- if (pdev->num_resources != 2)
- return -EINVAL;
-
- obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
- if (!obj)
- return -ENOMEM;
-
- obj->clk = clk_get(&pdev->dev, pdata->clk_name);
- if (IS_ERR(obj->clk))
- goto err_clk;
-
- obj->nr_tlb_entries = pdata->nr_tlb_entries;
- obj->name = pdata->name;
- obj->dev = &pdev->dev;
- obj->ctx = (void *)obj + sizeof(*obj);
- obj->da_start = pdata->da_start;
- obj->da_end = pdata->da_end;
-
- mutex_init(&obj->iommu_lock);
- mutex_init(&obj->mmap_lock);
- spin_lock_init(&obj->page_table_lock);
- INIT_LIST_HEAD(&obj->mmap);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- err = -ENODEV;
- goto err_mem;
- }
-
- res = request_mem_region(res->start, resource_size(res),
- dev_name(&pdev->dev));
- if (!res) {
- err = -EIO;
- goto err_mem;
- }
-
- obj->regbase = ioremap(res->start, resource_size(res));
- if (!obj->regbase) {
- err = -ENOMEM;
- goto err_ioremap;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- err = -ENODEV;
- goto err_irq;
- }
- err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
- dev_name(&pdev->dev), obj);
- if (err < 0)
- goto err_irq;
- platform_set_drvdata(pdev, obj);
-
- p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
- if (!p) {
- err = -ENOMEM;
- goto err_pgd;
- }
- memset(p, 0, IOPGD_TABLE_SIZE);
- clean_dcache_area(p, IOPGD_TABLE_SIZE);
- obj->iopgd = p;
-
- BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
-
- dev_info(&pdev->dev, "%s registered\n", obj->name);
- return 0;
-
-err_pgd:
- free_irq(irq, obj);
-err_irq:
- iounmap(obj->regbase);
-err_ioremap:
- release_mem_region(res->start, resource_size(res));
-err_mem:
- clk_put(obj->clk);
-err_clk:
- kfree(obj);
- return err;
-}
-
-static int __devexit omap_iommu_remove(struct platform_device *pdev)
-{
- int irq;
- struct resource *res;
- struct iommu *obj = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- iopgtable_clear_entry_all(obj);
- free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
-
- irq = platform_get_irq(pdev, 0);
- free_irq(irq, obj);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
- iounmap(obj->regbase);
-
- clk_put(obj->clk);
- dev_info(&pdev->dev, "%s removed\n", obj->name);
- kfree(obj);
- return 0;
-}
-
-static struct platform_driver omap_iommu_driver = {
- .probe = omap_iommu_probe,
- .remove = __devexit_p(omap_iommu_remove),
- .driver = {
- .name = "omap-iommu",
- },
-};
-
-static void iopte_cachep_ctor(void *iopte)
-{
- clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
-}
-
-static int __init omap_iommu_init(void)
-{
- struct kmem_cache *p;
- const unsigned long flags = SLAB_HWCACHE_ALIGN;
- size_t align = 1 << 10; /* L2 pagetable alignement */
-
- p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
- iopte_cachep_ctor);
- if (!p)
- return -ENOMEM;
- iopte_cachep = p;
-
- return platform_driver_register(&omap_iommu_driver);
-}
-module_init(omap_iommu_init);
-
-static void __exit omap_iommu_exit(void)
-{
- kmem_cache_destroy(iopte_cachep);
-
- platform_driver_unregister(&omap_iommu_driver);
-}
-module_exit(omap_iommu_exit);
-
-MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
-MODULE_ALIAS("platform:omap-iommu");
-MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
deleted file mode 100644
index c3e93bb..0000000
--- a/arch/arm/plat-omap/iopgtable.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * omap iommu: pagetable definitions
- *
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_OMAP_IOMMU_H
-#define __PLAT_OMAP_IOMMU_H
-
-/*
- * "L2 table" address mask and size definitions.
- */
-#define IOPGD_SHIFT 20
-#define IOPGD_SIZE (1UL << IOPGD_SHIFT)
-#define IOPGD_MASK (~(IOPGD_SIZE - 1))
-
-/*
- * "section" address mask and size definitions.
- */
-#define IOSECTION_SHIFT 20
-#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT)
-#define IOSECTION_MASK (~(IOSECTION_SIZE - 1))
-
-/*
- * "supersection" address mask and size definitions.
- */
-#define IOSUPER_SHIFT 24
-#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT)
-#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
-
-#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT))
-#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
-
-/*
- * "small page" address mask and size definitions.
- */
-#define IOPTE_SHIFT 12
-#define IOPTE_SIZE (1UL << IOPTE_SHIFT)
-#define IOPTE_MASK (~(IOPTE_SIZE - 1))
-
-/*
- * "large page" address mask and size definitions.
- */
-#define IOLARGE_SHIFT 16
-#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT)
-#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
-
-#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
-#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
-
-#define IOPAGE_MASK IOPTE_MASK
-
-/*
- * some descriptor attributes.
- */
-#define IOPGD_TABLE (1 << 0)
-#define IOPGD_SECTION (2 << 0)
-#define IOPGD_SUPER (1 << 18 | 2 << 0)
-
-#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE)
-
-#define IOPTE_SMALL (2 << 0)
-#define IOPTE_LARGE (1 << 0)
-
-/* to find an entry in a page-table-directory */
-#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
-#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da))
-
-#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
-#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
-
-/* to find an entry in the second-level page table. */
-#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
-#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da))
-
-static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
- u32 flags)
-{
- memset(e, 0, sizeof(*e));
-
- e->da = da;
- e->pa = pa;
- e->valid = 1;
- /* FIXME: add OMAP1 support */
- e->pgsz = flags & MMU_CAM_PGSZ_MASK;
- e->endian = flags & MMU_RAM_ENDIAN_MASK;
- e->elsz = flags & MMU_RAM_ELSZ_MASK;
- e->mixed = flags & MMU_RAM_MIXED_MASK;
-
- return iopgsz_to_bytes(e->pgsz);
-}
-
-#define to_iommu(dev) \
- (struct iommu *)platform_get_drvdata(to_platform_device(dev))
-
-#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
deleted file mode 100644
index 79e7fed..0000000
--- a/arch/arm/plat-omap/iovmm.c
+++ /dev/null
@@ -1,904 +0,0 @@
-/*
- * omap iommu: simple virtual address space management
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/device.h>
-#include <linux/scatterlist.h>
-
-#include <asm/cacheflush.h>
-#include <asm/mach/map.h>
-
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
-
-#include "iopgtable.h"
-
-/*
- * A device driver needs to create address mappings between:
- *
- * - iommu/device address
- * - physical address
- * - mpu virtual address
- *
- * There are 4 possible patterns for them:
- *
- * |iova/ mapping iommu_ page
- * | da pa va (d)-(p)-(v) function type
- * ---------------------------------------------------------------------------
- * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s
- * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s
- * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s
- * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n*
- *
- *
- * 'iova': device iommu virtual address
- * 'da': alias of 'iova'
- * 'pa': physical address
- * 'va': mpu virtual address
- *
- * 'c': contiguous memory area
- * 'd': discontiguous memory area
- * 'a': anonymous memory allocation
- * '()': optional feature
- *
- * 'n': a normal page(4KB) size is used.
- * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
- *
- * '*': not yet, but feasible.
- */
-
-static struct kmem_cache *iovm_area_cachep;
-
-/* return total bytes of sg buffers */
-static size_t sgtable_len(const struct sg_table *sgt)
-{
- unsigned int i, total = 0;
- struct scatterlist *sg;
-
- if (!sgt)
- return 0;
-
- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
- size_t bytes;
-
- bytes = sg->length;
-
- if (!iopgsz_ok(bytes)) {
- pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
- __func__, i, bytes);
- return 0;
- }
-
- total += bytes;
- }
-
- return total;
-}
-#define sgtable_ok(x) (!!sgtable_len(x))
-
-static unsigned max_alignment(u32 addr)
-{
- int i;
- unsigned pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
- for (i = 0; i < ARRAY_SIZE(pagesize) && addr & (pagesize[i] - 1); i++)
- ;
- return (i < ARRAY_SIZE(pagesize)) ? pagesize[i] : 0;
-}
-
-/*
- * calculate the optimal number sg elements from total bytes based on
- * iommu superpages
- */
-static unsigned sgtable_nents(size_t bytes, u32 da, u32 pa)
-{
- unsigned nr_entries = 0, ent_sz;
-
- if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
- pr_err("%s: wrong size %08x\n", __func__, bytes);
- return 0;
- }
-
- while (bytes) {
- ent_sz = max_alignment(da | pa);
- ent_sz = min_t(unsigned, ent_sz, iopgsz_max(bytes));
- nr_entries++;
- da += ent_sz;
- pa += ent_sz;
- bytes -= ent_sz;
- }
-
- return nr_entries;
-}
-
-/* allocate and initialize sg_table header(a kind of 'superblock') */
-static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags,
- u32 da, u32 pa)
-{
- unsigned int nr_entries;
- int err;
- struct sg_table *sgt;
-
- if (!bytes)
- return ERR_PTR(-EINVAL);
-
- if (!IS_ALIGNED(bytes, PAGE_SIZE))
- return ERR_PTR(-EINVAL);
-
- if (flags & IOVMF_LINEAR) {
- nr_entries = sgtable_nents(bytes, da, pa);
- if (!nr_entries)
- return ERR_PTR(-EINVAL);
- } else
- nr_entries = bytes / PAGE_SIZE;
-
- sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
- if (!sgt)
- return ERR_PTR(-ENOMEM);
-
- err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
- if (err) {
- kfree(sgt);
- return ERR_PTR(err);
- }
-
- pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
-
- return sgt;
-}
-
-/* free sg_table header(a kind of superblock) */
-static void sgtable_free(struct sg_table *sgt)
-{
- if (!sgt)
- return;
-
- sg_free_table(sgt);
- kfree(sgt);
-
- pr_debug("%s: sgt:%p\n", __func__, sgt);
-}
-
-/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
-static void *vmap_sg(const struct sg_table *sgt)
-{
- u32 va;
- size_t total;
- unsigned int i;
- struct scatterlist *sg;
- struct vm_struct *new;
- const struct mem_type *mtype;
-
- mtype = get_mem_type(MT_DEVICE);
- if (!mtype)
- return ERR_PTR(-EINVAL);
-
- total = sgtable_len(sgt);
- if (!total)
- return ERR_PTR(-EINVAL);
-
- new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
- if (!new)
- return ERR_PTR(-ENOMEM);
- va = (u32)new->addr;
-
- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
- size_t bytes;
- u32 pa;
- int err;
-
- pa = sg_phys(sg);
- bytes = sg->length;
-
- BUG_ON(bytes != PAGE_SIZE);
-
- err = ioremap_page(va, pa, mtype);
- if (err)
- goto err_out;
-
- va += bytes;
- }
-
- flush_cache_vmap((unsigned long)new->addr,
- (unsigned long)(new->addr + total));
- return new->addr;
-
-err_out:
- WARN_ON(1); /* FIXME: cleanup some mpu mappings */
- vunmap(new->addr);
- return ERR_PTR(-EAGAIN);
-}
-
-static inline void vunmap_sg(const void *va)
-{
- vunmap(va);
-}
-
-static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
-{
- struct iovm_struct *tmp;
-
- list_for_each_entry(tmp, &obj->mmap, list) {
- if ((da >= tmp->da_start) && (da < tmp->da_end)) {
- size_t len;
-
- len = tmp->da_end - tmp->da_start;
-
- dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
- __func__, tmp->da_start, da, tmp->da_end, len,
- tmp->flags);
-
- return tmp;
- }
- }
-
- return NULL;
-}
-
-/**
- * find_iovm_area - find iovma which includes @da
- * @da: iommu device virtual address
- *
- * Find the existing iovma starting at @da
- */
-struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
-{
- struct iovm_struct *area;
-
- mutex_lock(&obj->mmap_lock);
- area = __find_iovm_area(obj, da);
- mutex_unlock(&obj->mmap_lock);
-
- return area;
-}
-EXPORT_SYMBOL_GPL(find_iovm_area);
-
-/*
- * This finds the hole(area) which fits the requested address and len
- * in iovmas mmap, and returns the new allocated iovma.
- */
-static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
- size_t bytes, u32 flags)
-{
- struct iovm_struct *new, *tmp;
- u32 start, prev_end, alignment;
-
- if (!obj || !bytes)
- return ERR_PTR(-EINVAL);
-
- start = da;
- alignment = PAGE_SIZE;
-
- if (~flags & IOVMF_DA_FIXED) {
- /* Don't map address 0 */
- start = obj->da_start ? obj->da_start : alignment;
-
- if (flags & IOVMF_LINEAR)
- alignment = iopgsz_max(bytes);
- start = roundup(start, alignment);
- } else if (start < obj->da_start || start > obj->da_end ||
- obj->da_end - start < bytes) {
- return ERR_PTR(-EINVAL);
- }
-
- tmp = NULL;
- if (list_empty(&obj->mmap))
- goto found;
-
- prev_end = 0;
- list_for_each_entry(tmp, &obj->mmap, list) {
-
- if (prev_end > start)
- break;
-
- if (tmp->da_start > start && (tmp->da_start - start) >= bytes)
- goto found;
-
- if (tmp->da_end >= start && ~flags & IOVMF_DA_FIXED)
- start = roundup(tmp->da_end + 1, alignment);
-
- prev_end = tmp->da_end;
- }
-
- if ((start >= prev_end) && (obj->da_end - start >= bytes))
- goto found;
-
- dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
- __func__, da, bytes, flags);
-
- return ERR_PTR(-EINVAL);
-
-found:
- new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
- if (!new)
- return ERR_PTR(-ENOMEM);
-
- new->iommu = obj;
- new->da_start = start;
- new->da_end = start + bytes;
- new->flags = flags;
-
- /*
- * keep ascending order of iovmas
- */
- if (tmp)
- list_add_tail(&new->list, &tmp->list);
- else
- list_add(&new->list, &obj->mmap);
-
- dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
- __func__, new->da_start, start, new->da_end, bytes, flags);
-
- return new;
-}
-
-static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
-{
- size_t bytes;
-
- BUG_ON(!obj || !area);
-
- bytes = area->da_end - area->da_start;
-
- dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
- __func__, area->da_start, area->da_end, bytes, area->flags);
-
- list_del(&area->list);
- kmem_cache_free(iovm_area_cachep, area);
-}
-
-/**
- * da_to_va - convert (d) to (v)
- * @obj: objective iommu
- * @da: iommu device virtual address
- * @va: mpu virtual address
- *
- * Returns mpu virtual addr which corresponds to a given device virtual addr
- */
-void *da_to_va(struct iommu *obj, u32 da)
-{
- void *va = NULL;
- struct iovm_struct *area;
-
- mutex_lock(&obj->mmap_lock);
-
- area = __find_iovm_area(obj, da);
- if (!area) {
- dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
- goto out;
- }
- va = area->va;
-out:
- mutex_unlock(&obj->mmap_lock);
-
- return va;
-}
-EXPORT_SYMBOL_GPL(da_to_va);
-
-static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
-{
- unsigned int i;
- struct scatterlist *sg;
- void *va = _va;
- void *va_end;
-
- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
- struct page *pg;
- const size_t bytes = PAGE_SIZE;
-
- /*
- * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
- */
- pg = vmalloc_to_page(va);
- BUG_ON(!pg);
- sg_set_page(sg, pg, bytes, 0);
-
- va += bytes;
- }
-
- va_end = _va + PAGE_SIZE * i;
-}
-
-static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
-{
- /*
- * Actually this is not necessary at all, just exists for
- * consistency of the code readability.
- */
- BUG_ON(!sgt);
-}
-
-static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da,
- size_t len)
-{
- unsigned int i;
- struct scatterlist *sg;
-
- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
- unsigned bytes;
-
- bytes = max_alignment(da | pa);
- bytes = min_t(unsigned, bytes, iopgsz_max(len));
-
- BUG_ON(!iopgsz_ok(bytes));
-
- sg_set_buf(sg, phys_to_virt(pa), bytes);
- /*
- * 'pa' is cotinuous(linear).
- */
- pa += bytes;
- da += bytes;
- len -= bytes;
- }
- BUG_ON(len);
-}
-
-static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
-{
- /*
- * Actually this is not necessary at all, just exists for
- * consistency of the code readability
- */
- BUG_ON(!sgt);
-}
-
-/* create 'da' <-> 'pa' mapping from 'sgt' */
-static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
- const struct sg_table *sgt, u32 flags)
-{
- int err;
- unsigned int i, j;
- struct scatterlist *sg;
- u32 da = new->da_start;
-
- if (!obj || !sgt)
- return -EINVAL;
-
- BUG_ON(!sgtable_ok(sgt));
-
- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
- u32 pa;
- int pgsz;
- size_t bytes;
- struct iotlb_entry e;
-
- pa = sg_phys(sg);
- bytes = sg->length;
-
- flags &= ~IOVMF_PGSZ_MASK;
- pgsz = bytes_to_iopgsz(bytes);
- if (pgsz < 0)
- goto err_out;
- flags |= pgsz;
-
- pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
- i, da, pa, bytes);
-
- iotlb_init_entry(&e, da, pa, flags);
- err = iopgtable_store_entry(obj, &e);
- if (err)
- goto err_out;
-
- da += bytes;
- }
- return 0;
-
-err_out:
- da = new->da_start;
-
- for_each_sg(sgt->sgl, sg, i, j) {
- size_t bytes;
-
- bytes = iopgtable_clear_entry(obj, da);
-
- BUG_ON(!iopgsz_ok(bytes));
-
- da += bytes;
- }
- return err;
-}
-
-/* release 'da' <-> 'pa' mapping */
-static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
-{
- u32 start;
- size_t total = area->da_end - area->da_start;
-
- BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
-
- start = area->da_start;
- while (total > 0) {
- size_t bytes;
-
- bytes = iopgtable_clear_entry(obj, start);
- if (bytes == 0)
- bytes = PAGE_SIZE;
- else
- dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
- __func__, start, bytes, area->flags);
-
- BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
-
- total -= bytes;
- start += bytes;
- }
- BUG_ON(total);
-}
-
-/* template function for all unmapping */
-static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
- void (*fn)(const void *), u32 flags)
-{
- struct sg_table *sgt = NULL;
- struct iovm_struct *area;
-
- if (!IS_ALIGNED(da, PAGE_SIZE)) {
- dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
- return NULL;
- }
-
- mutex_lock(&obj->mmap_lock);
-
- area = __find_iovm_area(obj, da);
- if (!area) {
- dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
- goto out;
- }
-
- if ((area->flags & flags) != flags) {
- dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
- area->flags);
- goto out;
- }
- sgt = (struct sg_table *)area->sgt;
-
- unmap_iovm_area(obj, area);
-
- fn(area->va);
-
- dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
- area->da_start, da, area->da_end,
- area->da_end - area->da_start, area->flags);
-
- free_iovm_area(obj, area);
-out:
- mutex_unlock(&obj->mmap_lock);
-
- return sgt;
-}
-
-static u32 map_iommu_region(struct iommu *obj, u32 da,
- const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
-{
- int err = -ENOMEM;
- struct iovm_struct *new;
-
- mutex_lock(&obj->mmap_lock);
-
- new = alloc_iovm_area(obj, da, bytes, flags);
- if (IS_ERR(new)) {
- err = PTR_ERR(new);
- goto err_alloc_iovma;
- }
- new->va = va;
- new->sgt = sgt;
-
- if (map_iovm_area(obj, new, sgt, new->flags))
- goto err_map;
-
- mutex_unlock(&obj->mmap_lock);
-
- dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
- __func__, new->da_start, bytes, new->flags, va);
-
- return new->da_start;
-
-err_map:
- free_iovm_area(obj, new);
-err_alloc_iovma:
- mutex_unlock(&obj->mmap_lock);
- return err;
-}
-
-static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
- const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
-{
- return map_iommu_region(obj, da, sgt, va, bytes, flags);
-}
-
-/**
- * iommu_vmap - (d)-(p)-(v) address mapper
- * @obj: objective iommu
- * @sgt: address of scatter gather table
- * @flags: iovma and page property
- *
- * Creates 1-n-1 mapping with given @sgt and returns @da.
- * All @sgt element must be io page size aligned.
- */
-u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
- u32 flags)
-{
- size_t bytes;
- void *va = NULL;
-
- if (!obj || !obj->dev || !sgt)
- return -EINVAL;
-
- bytes = sgtable_len(sgt);
- if (!bytes)
- return -EINVAL;
- bytes = PAGE_ALIGN(bytes);
-
- if (flags & IOVMF_MMIO) {
- va = vmap_sg(sgt);
- if (IS_ERR(va))
- return PTR_ERR(va);
- }
-
- flags |= IOVMF_DISCONT;
- flags |= IOVMF_MMIO;
-
- da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
- if (IS_ERR_VALUE(da))
- vunmap_sg(va);
-
- return da;
-}
-EXPORT_SYMBOL_GPL(iommu_vmap);
-
-/**
- * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()'
- * @obj: objective iommu
- * @da: iommu device virtual address
- *
- * Free the iommu virtually contiguous memory area starting at
- * @da, which was returned by 'iommu_vmap()'.
- */
-struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
-{
- struct sg_table *sgt;
- /*
- * 'sgt' is allocated before 'iommu_vmalloc()' is called.
- * Just returns 'sgt' to the caller to free
- */
- sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
- if (!sgt)
- dev_dbg(obj->dev, "%s: No sgt\n", __func__);
- return sgt;
-}
-EXPORT_SYMBOL_GPL(iommu_vunmap);
-
-/**
- * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper
- * @obj: objective iommu
- * @da: contiguous iommu virtual memory
- * @bytes: allocation size
- * @flags: iovma and page property
- *
- * Allocate @bytes linearly and creates 1-n-1 mapping and returns
- * @da again, which might be adjusted if 'IOVMF_DA_FIXED' is not set.
- */
-u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
-{
- void *va;
- struct sg_table *sgt;
-
- if (!obj || !obj->dev || !bytes)
- return -EINVAL;
-
- bytes = PAGE_ALIGN(bytes);
-
- va = vmalloc(bytes);
- if (!va)
- return -ENOMEM;
-
- flags |= IOVMF_DISCONT;
- flags |= IOVMF_ALLOC;
-
- sgt = sgtable_alloc(bytes, flags, da, 0);
- if (IS_ERR(sgt)) {
- da = PTR_ERR(sgt);
- goto err_sgt_alloc;
- }
- sgtable_fill_vmalloc(sgt, va);
-
- da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
- if (IS_ERR_VALUE(da))
- goto err_iommu_vmap;
-
- return da;
-
-err_iommu_vmap:
- sgtable_drain_vmalloc(sgt);
- sgtable_free(sgt);
-err_sgt_alloc:
- vfree(va);
- return da;
-}
-EXPORT_SYMBOL_GPL(iommu_vmalloc);
-
-/**
- * iommu_vfree - release memory allocated by 'iommu_vmalloc()'
- * @obj: objective iommu
- * @da: iommu device virtual address
- *
- * Frees the iommu virtually continuous memory area starting at
- * @da, as obtained from 'iommu_vmalloc()'.
- */
-void iommu_vfree(struct iommu *obj, const u32 da)
-{
- struct sg_table *sgt;
-
- sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
- if (!sgt)
- dev_dbg(obj->dev, "%s: No sgt\n", __func__);
- sgtable_free(sgt);
-}
-EXPORT_SYMBOL_GPL(iommu_vfree);
-
-static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
- size_t bytes, u32 flags)
-{
- struct sg_table *sgt;
-
- sgt = sgtable_alloc(bytes, flags, da, pa);
- if (IS_ERR(sgt))
- return PTR_ERR(sgt);
-
- sgtable_fill_kmalloc(sgt, pa, da, bytes);
-
- da = map_iommu_region(obj, da, sgt, va, bytes, flags);
- if (IS_ERR_VALUE(da)) {
- sgtable_drain_kmalloc(sgt);
- sgtable_free(sgt);
- }
-
- return da;
-}
-
-/**
- * iommu_kmap - (d)-(p)-(v) address mapper
- * @obj: objective iommu
- * @da: contiguous iommu virtual memory
- * @pa: contiguous physical memory
- * @flags: iovma and page property
- *
- * Creates 1-1-1 mapping and returns @da again, which can be
- * adjusted if 'IOVMF_DA_FIXED' is not set.
- */
-u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
- u32 flags)
-{
- void *va;
-
- if (!obj || !obj->dev || !bytes)
- return -EINVAL;
-
- bytes = PAGE_ALIGN(bytes);
-
- va = ioremap(pa, bytes);
- if (!va)
- return -ENOMEM;
-
- flags |= IOVMF_LINEAR;
- flags |= IOVMF_MMIO;
-
- da = __iommu_kmap(obj, da, pa, va, bytes, flags);
- if (IS_ERR_VALUE(da))
- iounmap(va);
-
- return da;
-}
-EXPORT_SYMBOL_GPL(iommu_kmap);
-
-/**
- * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()'
- * @obj: objective iommu
- * @da: iommu device virtual address
- *
- * Frees the iommu virtually contiguous memory area starting at
- * @da, which was passed to and was returned by'iommu_kmap()'.
- */
-void iommu_kunmap(struct iommu *obj, u32 da)
-{
- struct sg_table *sgt;
- typedef void (*func_t)(const void *);
-
- sgt = unmap_vm_area(obj, da, (func_t)iounmap,
- IOVMF_LINEAR | IOVMF_MMIO);
- if (!sgt)
- dev_dbg(obj->dev, "%s: No sgt\n", __func__);
- sgtable_free(sgt);
-}
-EXPORT_SYMBOL_GPL(iommu_kunmap);
-
-/**
- * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper
- * @obj: objective iommu
- * @da: contiguous iommu virtual memory
- * @bytes: bytes for allocation
- * @flags: iovma and page property
- *
- * Allocate @bytes linearly and creates 1-1-1 mapping and returns
- * @da again, which might be adjusted if 'IOVMF_DA_FIXED' is not set.
- */
-u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
-{
- void *va;
- u32 pa;
-
- if (!obj || !obj->dev || !bytes)
- return -EINVAL;
-
- bytes = PAGE_ALIGN(bytes);
-
- va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
- if (!va)
- return -ENOMEM;
- pa = virt_to_phys(va);
-
- flags |= IOVMF_LINEAR;
- flags |= IOVMF_ALLOC;
-
- da = __iommu_kmap(obj, da, pa, va, bytes, flags);
- if (IS_ERR_VALUE(da))
- kfree(va);
-
- return da;
-}
-EXPORT_SYMBOL_GPL(iommu_kmalloc);
-
-/**
- * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()'
- * @obj: objective iommu
- * @da: iommu device virtual address
- *
- * Frees the iommu virtually contiguous memory area starting at
- * @da, which was passed to and was returned by'iommu_kmalloc()'.
- */
-void iommu_kfree(struct iommu *obj, u32 da)
-{
- struct sg_table *sgt;
-
- sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
- if (!sgt)
- dev_dbg(obj->dev, "%s: No sgt\n", __func__);
- sgtable_free(sgt);
-}
-EXPORT_SYMBOL_GPL(iommu_kfree);
-
-
-static int __init iovmm_init(void)
-{
- const unsigned long flags = SLAB_HWCACHE_ALIGN;
- struct kmem_cache *p;
-
- p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
- flags, NULL);
- if (!p)
- return -ENOMEM;
- iovm_area_cachep = p;
-
- return 0;
-}
-module_init(iovmm_init);
-
-static void __exit iovmm_exit(void)
-{
- kmem_cache_destroy(iovm_area_cachep);
-}
-module_exit(iovmm_exit);
-
-MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 6c62af1..4b15cd7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,45 +24,40 @@
#include <linux/slab.h>
#include <plat/mcbsp.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
-/* XXX These "sideways" includes are a sign that something is wrong */
-#include "../mach-omap2/cm2xxx_3xxx.h"
-#include "../mach-omap2/cm-regbits-34xx.h"
-
struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count, omap_mcbsp_cache_size;
+int omap_mcbsp_count;
+
+#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
- if (cpu_class_is_omap1()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
- } else if (cpu_is_omap2420()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ ((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
+ __raw_writew((u16)val, addr);
} else {
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
- __raw_writel(val, mcbsp->io_base + reg);
+ ((u32 *)mcbsp->reg_cache)[reg] = val;
+ __raw_writel(val, addr);
}
}
static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
{
- if (cpu_class_is_omap1()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
- } else if (cpu_is_omap2420()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ return !from_cache ? __raw_readw(addr) :
+ ((u16 *)mcbsp->reg_cache)[reg];
} else {
- return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ return !from_cache ? __raw_readl(addr) :
+ ((u32 *)mcbsp->reg_cache)[reg];
}
}
-#ifdef CONFIG_ARCH_OMAP3
static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
__raw_writel(val, mcbsp->st_data->io_base_st + reg);
@@ -72,7 +67,6 @@
{
return __raw_readl(mcbsp->st_data->io_base_st + reg);
}
-#endif
#define MCBSP_READ(mcbsp, reg) \
omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
@@ -187,7 +181,7 @@
MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
MCBSP_WRITE(mcbsp, XCCR, config->xccr);
MCBSP_WRITE(mcbsp, RCCR, config->rccr);
}
@@ -239,46 +233,28 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- data_reg = mcbsp->phys_dma_base;
-
- if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) {
+ if (mcbsp->pdata->reg_size == 2) {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR1;
+ data_reg = OMAP_MCBSP_REG_DRR1;
else
- data_reg += OMAP_MCBSP_REG_DXR1;
+ data_reg = OMAP_MCBSP_REG_DXR1;
} else {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR;
+ data_reg = OMAP_MCBSP_REG_DRR;
else
- data_reg += OMAP_MCBSP_REG_DXR;
+ data_reg = OMAP_MCBSP_REG_DXR;
}
- return data_reg;
+ return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
}
EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_device *find_omap_device_by_dev(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- return container_of(pdev, struct omap_device, pdev);
-}
-
static void omap_st_on(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Sidetone uses McBSP ICLK - which must not idle when sidetones
- * are enabled or sidetones start sounding ugly.
- */
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w &= ~(1 << (mcbsp->id - 2));
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
/* Enable McBSP Sidetone */
w = MCBSP_READ(mcbsp, SSELCR);
@@ -292,9 +268,6 @@
static void omap_st_off(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
@@ -302,17 +275,13 @@
w = MCBSP_READ(mcbsp, SSELCR);
MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w |= 1 << (mcbsp->id - 2);
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
}
static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
{
u16 val, i;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
val = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -340,9 +309,6 @@
{
u16 w;
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -525,14 +491,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_tx_thres)
MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
@@ -548,14 +513,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_rx_thres)
MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
@@ -625,6 +589,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of free locations in the buffer */
buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
@@ -648,6 +614,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of used locations in the buffer */
buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
@@ -683,46 +651,6 @@
}
EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
- /*
- * Enable wakup behavior, smart idle and all wakeups
- * REVISIT: some wakeups may be unnecessary
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- }
-}
-
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Disable wakup behavior, smart idle and all wakeups
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /*
- * HW bug workaround - If no_idle mode is taken, we need to
- * go to smart_idle before going to always_idle, or the
- * device will not hit retention anymore.
- */
-
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
- }
-}
-#else
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
-#endif
-
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
@@ -735,7 +663,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+ reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
if (!reg_cache) {
return -ENOMEM;
}
@@ -757,8 +685,9 @@
pm_runtime_get_sync(mcbsp->dev);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_request(mcbsp);
+ /* Enable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/*
* Make sure that transmitter, receiver and sample-rate generator are
@@ -795,8 +724,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -825,8 +755,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -866,7 +797,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_start(mcbsp);
/* Only enable SRG, if McBSP is master */
@@ -904,7 +835,7 @@
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
}
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
/* Release the transmitter and receiver */
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w &= ~(tx ? XDISABLE : 0);
@@ -934,7 +865,7 @@
/* Reset transmitter */
tx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w |= (tx ? XDISABLE : 0);
MCBSP_WRITE(mcbsp, XCCR, w);
@@ -944,7 +875,7 @@
/* Reset receiver */
rx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, RCCR);
w |= (rx ? RDISABLE : 0);
MCBSP_WRITE(mcbsp, RCCR, w);
@@ -961,39 +892,72 @@
MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
}
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_stop(mcbsp);
}
EXPORT_SYMBOL(omap_mcbsp_stop);
-/*
- * The following functions are only required on an OMAP1-only build.
- * mach-omap2/mcbsp.c contains the real functions
- */
-#ifndef CONFIG_ARCH_OMAP2PLUS
int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return -EINVAL;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
+ return -EINVAL;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ src = "clks_ext";
+ else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ src = "clks_fclk";
+ else
+ return -EINVAL;
+
+ if (mcbsp->pdata->set_clk_src)
+ return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
+ else
+ return -EINVAL;
}
+EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
void omap2_mcbsp1_mux_clkr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (mux == CLKR_SRC_CLKR)
+ src = "clkr";
+ else if (mux == CLKR_SRC_CLKX)
+ src = "clkx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
-}
-#endif
+ struct omap_mcbsp *mcbsp;
+ const char *src;
-#ifdef CONFIG_ARCH_OMAP3
+ if (mux == FSR_SRC_FSR)
+ src = "fsr";
+ else if (mux == FSR_SRC_FSX)
+ src = "fsx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
+
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
@@ -1084,6 +1048,17 @@
static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+static const struct attribute *additional_attrs[] = {
+ &dev_attr_max_tx_thres.attr,
+ &dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+ .attrs = (struct attribute **)additional_attrs,
+};
+
static ssize_t st_taps_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1142,27 +1117,6 @@
static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
-static const struct attribute *additional_attrs[] = {
- &dev_attr_max_tx_thres.attr,
- &dev_attr_max_rx_thres.attr,
- &dev_attr_dma_op_mode.attr,
- NULL,
-};
-
-static const struct attribute_group additional_attr_group = {
- .attrs = (struct attribute **)additional_attrs,
-};
-
-static inline int __devinit omap_additional_add(struct device *dev)
-{
- return sysfs_create_group(&dev->kobj, &additional_attr_group);
-}
-
-static inline void __devexit omap_additional_remove(struct device *dev)
-{
- sysfs_remove_group(&dev->kobj, &additional_attr_group);
-}
-
static const struct attribute *sidetone_attrs[] = {
&dev_attr_st_taps.attr,
NULL,
@@ -1172,10 +1126,9 @@
.attrs = (struct attribute **)sidetone_attrs,
};
-static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+static int __devinit omap_st_add(struct omap_mcbsp *mcbsp,
+ struct resource *res)
{
- struct platform_device *pdev;
- struct resource *res;
struct omap_mcbsp_st_data *st_data;
int err;
@@ -1185,9 +1138,6 @@
goto err1;
}
- pdev = container_of(mcbsp->dev, struct platform_device, dev);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
st_data->io_base_st = ioremap(res->start, resource_size(res));
if (!st_data->io_base_st) {
err = -ENOMEM;
@@ -1214,60 +1164,11 @@
{
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- if (st_data) {
- sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
- iounmap(st_data->io_base_st);
- kfree(st_data);
- }
+ sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ iounmap(st_data->io_base_st);
+ kfree(st_data);
}
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
-{
- mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
- if (cpu_is_omap34xx()) {
- /*
- * Initially configure the maximum thresholds to a safe value.
- * The McBSP FIFO usage with these values should not go under
- * 16 locations.
- * If the whole FIFO without safety buffer is used, than there
- * is a possibility that the DMA will be not able to push the
- * new data on time, causing channel shifts in runtime.
- */
- mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
- mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
- /*
- * REVISIT: Set dmap_op_mode to THRESHOLD as default
- * for mcbsp2 instances.
- */
- if (omap_additional_add(mcbsp->dev))
- dev_warn(mcbsp->dev,
- "Unable to create additional controls\n");
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- if (omap_st_add(mcbsp))
- dev_warn(mcbsp->dev,
- "Unable to create sidetone controls\n");
-
- } else {
- mcbsp->max_tx_thres = -EINVAL;
- mcbsp->max_rx_thres = -EINVAL;
- }
-}
-
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
-{
- if (cpu_is_omap34xx()) {
- omap_additional_remove(mcbsp->dev);
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- omap_st_remove(mcbsp);
- }
-}
-#else
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -1316,7 +1217,7 @@
}
}
mcbsp->phys_base = res->start;
- omap_mcbsp_cache_size = resource_size(res);
+ mcbsp->reg_cache_size = resource_size(res);
mcbsp->io_base = ioremap(res->start, resource_size(res));
if (!mcbsp->io_base) {
ret = -ENOMEM;
@@ -1364,15 +1265,52 @@
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
- mcbsp->mcbsp_config_type = pdata->mcbsp_config_type;
platform_set_drvdata(pdev, mcbsp);
pm_runtime_enable(mcbsp->dev);
- /* Initialize mcbsp properties for OMAP34XX if needed / applicable */
- omap34xx_device_init(mcbsp);
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+ if (mcbsp->pdata->buffer_size) {
+ /*
+ * Initially configure the maximum thresholds to a safe value.
+ * The McBSP FIFO usage with these values should not go under
+ * 16 locations.
+ * If the whole FIFO without safety buffer is used, than there
+ * is a possibility that the DMA will be not able to push the
+ * new data on time, causing channel shifts in runtime.
+ */
+ mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+ mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
+
+ ret = sysfs_create_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create additional controls\n");
+ goto err_thres;
+ }
+ } else {
+ mcbsp->max_tx_thres = -EINVAL;
+ mcbsp->max_rx_thres = -EINVAL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
+ if (res) {
+ ret = omap_st_add(mcbsp, res);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create sidetone controls\n");
+ goto err_st;
+ }
+ }
return 0;
+err_st:
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+err_thres:
+ clk_put(mcbsp->fclk);
err_res:
iounmap(mcbsp->io_base);
err_ioremap:
@@ -1392,7 +1330,12 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- omap34xx_device_exit(mcbsp);
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+
+ if (mcbsp->st_data)
+ omap_st_remove(mcbsp);
clk_put(mcbsp->fclk);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 02609ee..cd90bed 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -85,6 +85,8 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
@@ -94,6 +96,23 @@
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
+static int omap_device_register(struct platform_device *pdev);
+static int omap_early_device_register(struct platform_device *pdev);
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+static void omap_device_delete(struct omap_device *od);
+
+
+static struct omap_device_pm_latency omap_default_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ }
+};
+
/* Private functions */
/**
@@ -114,7 +133,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +157,24 @@
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev->dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +201,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +224,26 @@
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev->dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -245,28 +261,27 @@
if (!clk_alias || !clk_name)
return;
- pr_debug("omap_device: %s: Creating %s -> %s\n",
- dev_name(&od->pdev.dev), clk_alias, clk_name);
+ dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
- r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
+ r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
if (!IS_ERR(r)) {
- pr_warning("omap_device: %s: alias %s already exists\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_warn(&od->pdev->dev,
+ "alias %s already exists\n", clk_alias);
clk_put(r);
return;
}
r = omap_clk_get_by_name(clk_name);
if (IS_ERR(r)) {
- pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
- dev_name(&od->pdev.dev), clk_name);
+ dev_err(&od->pdev->dev,
+ "omap_clk_get_by_name for %s failed\n", clk_name);
return;
}
- l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
+ l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
if (!l) {
- pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_err(&od->pdev->dev,
+ "clkdev_alloc for %s failed\n", clk_alias);
return;
}
@@ -304,6 +319,96 @@
}
+static struct dev_pm_domain omap_device_pm_domain;
+
+/**
+ * omap_device_build_from_dt - build an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Function for building an omap_device already registered from device-tree
+ *
+ * Returns 0 or PTR_ERR() on error.
+ */
+static int omap_device_build_from_dt(struct platform_device *pdev)
+{
+ struct omap_hwmod **hwmods;
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+ struct device_node *node = pdev->dev.of_node;
+ const char *oh_name;
+ int oh_cnt, i, ret = 0;
+
+ oh_cnt = of_property_count_strings(node, "ti,hwmods");
+ if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ return -ENODEV;
+ }
+
+ hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods) {
+ ret = -ENOMEM;
+ goto odbfd_exit;
+ }
+
+ for (i = 0; i < oh_cnt; i++) {
+ of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
+ oh_name);
+ ret = -EINVAL;
+ goto odbfd_exit1;
+ }
+ hwmods[i] = oh;
+ }
+
+ od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
+ if (!od) {
+ dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
+ oh_name);
+ ret = PTR_ERR(od);
+ goto odbfd_exit1;
+ }
+
+ if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
+ omap_device_disable_idle_on_suspend(pdev);
+
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+
+odbfd_exit1:
+ kfree(hwmods);
+odbfd_exit:
+ return ret;
+}
+
+static int _omap_device_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (pdev->dev.of_node)
+ omap_device_build_from_dt(pdev);
+ break;
+
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (pdev->archdata.od)
+ omap_device_delete(pdev->archdata.od);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+
/* Public functions for use by core code */
/**
@@ -343,7 +448,7 @@
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
-int omap_device_count_resources(struct omap_device *od)
+static int omap_device_count_resources(struct omap_device *od)
{
int c = 0;
int i;
@@ -352,7 +457,7 @@
c += omap_hwmod_count_resources(od->hwmods[i]);
pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+ "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
return c;
}
@@ -374,7 +479,8 @@
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
-int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+static int omap_device_fill_resources(struct omap_device *od,
+ struct resource *res)
{
int c = 0;
int i, r;
@@ -389,6 +495,113 @@
}
/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt)
+{
+ int ret = -ENOMEM;
+ struct omap_device *od;
+ struct resource *res = NULL;
+ int i, res_count;
+ struct omap_hwmod **hwmods;
+
+ od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ if (!od) {
+ ret = -ENOMEM;
+ goto oda_exit1;
+ }
+ od->hwmods_cnt = oh_cnt;
+
+ hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods)
+ goto oda_exit2;
+
+ od->hwmods = hwmods;
+ od->pdev = pdev;
+
+ /*
+ * HACK: Ideally the resources from DT should match, and hwmod
+ * should just add the missing ones. Since the name is not
+ * properly populated by DT, stick to hwmod resources only.
+ */
+ if (pdev->num_resources && pdev->resource)
+ dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, pdev->num_resources);
+
+ res_count = omap_device_count_resources(od);
+ if (res_count > 0) {
+ dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
+ __func__, res_count);
+ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!res)
+ goto oda_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto oda_exit3;
+ }
+
+ if (!pm_lats) {
+ pm_lats = omap_default_latency;
+ pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+ }
+
+ od->pm_lats_cnt = pm_lats_cnt;
+ od->pm_lats = kmemdup(pm_lats,
+ sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+ GFP_KERNEL);
+ if (!od->pm_lats)
+ goto oda_exit3;
+
+ pdev->archdata.od = od;
+
+ for (i = 0; i < oh_cnt; i++) {
+ hwmods[i]->od = od;
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
+ }
+
+ return od;
+
+oda_exit3:
+ kfree(hwmods);
+oda_exit2:
+ kfree(od);
+oda_exit1:
+ dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+ return ERR_PTR(ret);
+}
+
+static void omap_device_delete(struct omap_device *od)
+{
+ if (!od)
+ return;
+
+ od->pdev->archdata.od = NULL;
+ kfree(od->pm_lats);
+ kfree(od->hwmods);
+ kfree(od);
+}
+
+/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
@@ -405,7 +618,7 @@
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
@@ -438,18 +651,15 @@
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device)
{
int ret = -ENOMEM;
+ struct platform_device *pdev;
struct omap_device *od;
- char *pdev_name2;
- struct resource *res = NULL;
- int i, res_count;
- struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
@@ -457,72 +667,40 @@
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
- pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
- oh_cnt);
+ pdev = platform_device_alloc(pdev_name, pdev_id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto odbs_exit;
+ }
- od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+ if (pdev->id != -1)
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+ else
+ dev_set_name(&pdev->dev, "%s", pdev->name);
+
+ od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
if (!od)
- return ERR_PTR(-ENOMEM);
-
- od->hwmods_cnt = oh_cnt;
-
- hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
- GFP_KERNEL);
- if (!hwmods)
goto odbs_exit1;
- memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
- od->hwmods = hwmods;
-
- pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
- if (!pdev_name2)
- goto odbs_exit2;
- strcpy(pdev_name2, pdev_name);
-
- od->pdev.name = pdev_name2;
- od->pdev.id = pdev_id;
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
- if (!res)
- goto odbs_exit3;
- }
- omap_device_fill_resources(od, res);
-
- od->pdev.num_resources = res_count;
- od->pdev.resource = res;
-
- ret = platform_device_add_data(&od->pdev, pdata, pdata_len);
+ ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
- goto odbs_exit4;
-
- od->pm_lats = pm_lats;
- od->pm_lats_cnt = pm_lats_cnt;
+ goto odbs_exit2;
if (is_early_device)
- ret = omap_early_device_register(od);
+ ret = omap_early_device_register(pdev);
else
- ret = omap_device_register(od);
-
- for (i = 0; i < oh_cnt; i++) {
- hwmods[i]->od = od;
- _add_hwmod_clocks_clkdev(od, hwmods[i]);
- }
-
+ ret = omap_device_register(pdev);
if (ret)
- goto odbs_exit4;
+ goto odbs_exit2;
- return od;
+ return pdev;
-odbs_exit4:
- kfree(res);
-odbs_exit3:
- kfree(pdev_name2);
odbs_exit2:
- kfree(hwmods);
+ omap_device_delete(od);
odbs_exit1:
- kfree(od);
+ platform_device_put(pdev);
+odbs_exit:
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
@@ -538,11 +716,11 @@
* platform_early_add_device() on the underlying platform_device.
* Returns 0 by default.
*/
-int omap_early_device_register(struct omap_device *od)
+static int omap_early_device_register(struct platform_device *pdev)
{
struct platform_device *devices[1];
- devices[0] = &(od->pdev);
+ devices[0] = pdev;
early_platform_add_devices(devices, 1);
return 0;
}
@@ -638,13 +816,13 @@
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
-int omap_device_register(struct omap_device *od)
+static int omap_device_register(struct platform_device *pdev)
{
- pr_debug("omap_device: %s: registering\n", od->pdev.name);
+ pr_debug("omap_device: %s: registering\n", pdev->name);
- od->pdev.dev.parent = &omap_device_parent;
- od->pdev.dev.pm_domain = &omap_device_pm_domain;
- return platform_device_register(&od->pdev);
+ pdev->dev.parent = &omap_device_parent;
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+ return platform_device_add(pdev);
}
@@ -671,8 +849,9 @@
od = to_omap_device(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -710,8 +889,9 @@
od = to_omap_device(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -742,8 +922,9 @@
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -837,6 +1018,42 @@
return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
}
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+ struct omap_hwmod *oh;
+
+ if (!oh_name) {
+ WARN(1, "%s: no hwmod name!\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (IS_ERR_OR_NULL(oh)) {
+ WARN(1, "%s: no hwmod for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ }
+ if (IS_ERR_OR_NULL(oh->od)) {
+ WARN(1, "%s: no omap_device for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ }
+
+ if (IS_ERR_OR_NULL(oh->od->pdev))
+ return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+ return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
@@ -917,8 +1134,13 @@
.parent = &platform_bus,
};
+static struct notifier_block platform_nb = {
+ .notifier_call = _omap_device_notifier_call,
+};
+
static int __init omap_device_init(void)
{
+ bus_register_notifier(&platform_bus_type, &platform_nb);
return device_register(&omap_device_parent);
}
core_initcall(omap_device_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 363c91e..8b28664 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/omapfb.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
@@ -29,10 +28,8 @@
#include <plat/sram.h>
#include <plat/board.h>
#include <plat/cpu.h>
-#include <plat/vram.h>
#include "sram.h"
-#include "fb.h"
/* XXX These "sideways" includes are a sign that something is wrong */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
@@ -41,16 +38,9 @@
#endif
#define OMAP1_SRAM_PA 0x20000000
-#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
-#define OMAP2_SRAM_VA 0xfe400000
-#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_VA 0xfe400000
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_VA 0xfe400000
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -73,9 +63,9 @@
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_start;
-static unsigned long omap_sram_base;
+static void __iomem *omap_sram_base;
static unsigned long omap_sram_size;
-static unsigned long omap_sram_ceil;
+static void __iomem *omap_sram_ceil;
/*
* Depending on the target RAMFS firewall setup, the public usable amount of
@@ -112,12 +102,9 @@
*/
static void __init omap_detect_sram(void)
{
- unsigned long reserved;
-
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
@@ -126,25 +113,20 @@
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_PUB_VA;
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
} else {
- omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_VA;
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
} else {
- omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
@@ -153,7 +135,6 @@
}
}
} else {
- omap_sram_base = OMAP1_SRAM_VA;
omap_sram_start = OMAP1_SRAM_PA;
if (cpu_is_omap7xx())
@@ -170,35 +151,14 @@
omap_sram_size = 0x4000;
}
}
- reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
- omap_sram_size,
- omap_sram_start + SRAM_BOOTLOADER_SZ,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
- omap_sram_size -= reserved;
-
- reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
- omap_sram_size,
- omap_sram_start + SRAM_BOOTLOADER_SZ,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
- omap_sram_size -= reserved;
-
- omap_sram_ceil = omap_sram_base + omap_sram_size;
}
-static struct map_desc omap_sram_io_desc[] __initdata = {
- { /* .length gets filled in at runtime */
- .virtual = OMAP1_SRAM_VA,
- .pfn = __phys_to_pfn(OMAP1_SRAM_PA),
- .type = MT_MEMORY
- }
-};
-
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
static void __init omap_map_sram(void)
{
- unsigned long base;
+ int cached = 1;
if (omap_sram_size == 0)
return;
@@ -211,28 +171,18 @@
* the ARM may attempt to write cache lines back to SDRAM
* which will cause the system to hang.
*/
- omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
+ cached = 0;
}
- omap_sram_io_desc[0].virtual = omap_sram_base;
- base = omap_sram_start;
- base = ROUND_DOWN(base, PAGE_SIZE);
- omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
- omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
- iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
+ omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+ omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
+ cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
- pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
- (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
- omap_sram_io_desc[0].virtual,
- omap_sram_io_desc[0].length);
-
- /*
- * Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but since we're called from map_io(), we
- * must do it here.
- */
- local_flush_tlb_all();
- flush_cache_all();
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
/*
* Looks like we need to preserve some bootloader code at the
@@ -251,13 +201,18 @@
*/
void *omap_sram_push_address(unsigned long size)
{
- if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
+ unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+ available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+
+ if (size > available) {
pr_err("Not enough space in SRAM\n");
return NULL;
}
- omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
+ new_ceil -= size;
+ new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+ omap_sram_ceil = IOMEM(new_ceil);
return (void *)omap_sram_ceil;
}
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 3075b9f..3abf304 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -12,15 +12,7 @@
#define __PLAT_GPIO_H
#include <linux/init.h>
-#include <asm-generic/gpio.h>
-
-/*
- * GENERIC_GPIO primitives.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#include <linux/types.h>
/*
* Orion-specific GPIO API extensions.
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 3aca5ba..f302d04 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,7 +4,6 @@
obj-y := dma.o
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
deleted file mode 100644
index a11dc36..0000000
--- a/arch/arm/plat-pxa/gpio.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * linux/arch/arm/plat-pxa/gpio.c
- *
- * Generic PXA GPIO handling
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-#include <linux/slab.h>
-
-#include <mach/gpio.h>
-
-int pxa_last_gpio;
-
-struct pxa_gpio_chip {
- struct gpio_chip chip;
- void __iomem *regbase;
- char label[10];
-
- unsigned long irq_mask;
- unsigned long irq_edge_rise;
- unsigned long irq_edge_fall;
-
-#ifdef CONFIG_PM
- unsigned long saved_gplr;
- unsigned long saved_gpdr;
- unsigned long saved_grer;
- unsigned long saved_gfer;
-#endif
-};
-
-static DEFINE_SPINLOCK(gpio_lock);
-static struct pxa_gpio_chip *pxa_gpio_chips;
-
-#define for_each_gpio_chip(i, c) \
- for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
-
-static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
-{
- return container_of(c, struct pxa_gpio_chip, chip)->regbase;
-}
-
-static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
-{
- return &pxa_gpio_chips[gpio_to_bank(gpio)];
-}
-
-static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- void __iomem *base = gpio_chip_base(chip);
- uint32_t value, mask = 1 << offset;
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- value = __raw_readl(base + GPDR_OFFSET);
- if (__gpio_is_inverted(chip->base + offset))
- value |= mask;
- else
- value &= ~mask;
- __raw_writel(value, base + GPDR_OFFSET);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
- return 0;
-}
-
-static int pxa_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- void __iomem *base = gpio_chip_base(chip);
- uint32_t tmp, mask = 1 << offset;
- unsigned long flags;
-
- __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- tmp = __raw_readl(base + GPDR_OFFSET);
- if (__gpio_is_inverted(chip->base + offset))
- tmp &= ~mask;
- else
- tmp |= mask;
- __raw_writel(tmp, base + GPDR_OFFSET);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
- return 0;
-}
-
-static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
-}
-
-static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- __raw_writel(1 << offset, gpio_chip_base(chip) +
- (value ? GPSR_OFFSET : GPCR_OFFSET));
-}
-
-static int __init pxa_init_gpio_chip(int gpio_end)
-{
- int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
- struct pxa_gpio_chip *chips;
-
- chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
- if (chips == NULL) {
- pr_err("%s: failed to allocate GPIO chips\n", __func__);
- return -ENOMEM;
- }
-
- for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
- struct gpio_chip *c = &chips[i].chip;
-
- sprintf(chips[i].label, "gpio-%d", i);
- chips[i].regbase = (void __iomem *)GPIO_BANK(i);
-
- c->base = gpio;
- c->label = chips[i].label;
-
- c->direction_input = pxa_gpio_direction_input;
- c->direction_output = pxa_gpio_direction_output;
- c->get = pxa_gpio_get;
- c->set = pxa_gpio_set;
-
- /* number of GPIOs on last bank may be less than 32 */
- c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
- gpiochip_add(c);
- }
- pxa_gpio_chips = chips;
- return 0;
-}
-
-/* Update only those GRERx and GFERx edge detection register bits if those
- * bits are set in c->irq_mask
- */
-static inline void update_edge_detect(struct pxa_gpio_chip *c)
-{
- uint32_t grer, gfer;
-
- grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
- gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
- grer |= c->irq_edge_rise & c->irq_mask;
- gfer |= c->irq_edge_fall & c->irq_mask;
- __raw_writel(grer, c->regbase + GRER_OFFSET);
- __raw_writel(gfer, c->regbase + GFER_OFFSET);
-}
-
-static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
-{
- struct pxa_gpio_chip *c;
- int gpio = irq_to_gpio(d->irq);
- unsigned long gpdr, mask = GPIO_bit(gpio);
-
- c = gpio_to_pxachip(gpio);
-
- if (type == IRQ_TYPE_PROBE) {
- /* Don't mess with enabled GPIOs using preconfigured edges or
- * GPIOs set to alternate function or to output during probe
- */
- if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
- return 0;
-
- if (__gpio_is_occupied(gpio))
- return 0;
-
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
-
- if (__gpio_is_inverted(gpio))
- __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
- else
- __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
-
- if (type & IRQ_TYPE_EDGE_RISING)
- c->irq_edge_rise |= mask;
- else
- c->irq_edge_rise &= ~mask;
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- c->irq_edge_fall |= mask;
- else
- c->irq_edge_fall &= ~mask;
-
- update_edge_detect(c);
-
- pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio,
- ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
- ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
- return 0;
-}
-
-static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct pxa_gpio_chip *c;
- int loop, gpio, gpio_base, n;
- unsigned long gedr;
-
- do {
- loop = 0;
- for_each_gpio_chip(gpio, c) {
- gpio_base = c->chip.base;
-
- gedr = __raw_readl(c->regbase + GEDR_OFFSET);
- gedr = gedr & c->irq_mask;
- __raw_writel(gedr, c->regbase + GEDR_OFFSET);
-
- n = find_first_bit(&gedr, BITS_PER_LONG);
- while (n < BITS_PER_LONG) {
- loop = 1;
-
- generic_handle_irq(gpio_to_irq(gpio_base + n));
- n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
- }
- }
- } while (loop);
-}
-
-static void pxa_ack_muxed_gpio(struct irq_data *d)
-{
- int gpio = irq_to_gpio(d->irq);
- struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
-
- __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
-}
-
-static void pxa_mask_muxed_gpio(struct irq_data *d)
-{
- int gpio = irq_to_gpio(d->irq);
- struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
- uint32_t grer, gfer;
-
- c->irq_mask &= ~GPIO_bit(gpio);
-
- grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
- gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
- __raw_writel(grer, c->regbase + GRER_OFFSET);
- __raw_writel(gfer, c->regbase + GFER_OFFSET);
-}
-
-static void pxa_unmask_muxed_gpio(struct irq_data *d)
-{
- int gpio = irq_to_gpio(d->irq);
- struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
-
- c->irq_mask |= GPIO_bit(gpio);
- update_edge_detect(c);
-}
-
-static struct irq_chip pxa_muxed_gpio_chip = {
- .name = "GPIO",
- .irq_ack = pxa_ack_muxed_gpio,
- .irq_mask = pxa_mask_muxed_gpio,
- .irq_unmask = pxa_unmask_muxed_gpio,
- .irq_set_type = pxa_gpio_irq_type,
-};
-
-void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
-{
- struct pxa_gpio_chip *c;
- int gpio, irq;
-
- pxa_last_gpio = end;
-
- /* Initialize GPIO chips */
- pxa_init_gpio_chip(end);
-
- /* clear all GPIO edge detects */
- for_each_gpio_chip(gpio, c) {
- __raw_writel(0, c->regbase + GFER_OFFSET);
- __raw_writel(0, c->regbase + GRER_OFFSET);
- __raw_writel(~0,c->regbase + GEDR_OFFSET);
- }
-
- for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
- irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- /* Install handler for GPIO>=2 edge detect interrupts */
- irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
- pxa_muxed_gpio_chip.irq_set_wake = fn;
-}
-
-#ifdef CONFIG_PM
-static int pxa_gpio_suspend(void)
-{
- struct pxa_gpio_chip *c;
- int gpio;
-
- for_each_gpio_chip(gpio, c) {
- c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
- c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
- c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
- c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
-
- /* Clear GPIO transition detect bits */
- __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
- }
- return 0;
-}
-
-static void pxa_gpio_resume(void)
-{
- struct pxa_gpio_chip *c;
- int gpio;
-
- for_each_gpio_chip(gpio, c) {
- /* restore level with set/clear */
- __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
- __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
-
- __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
- __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
- __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
- }
-}
-#else
-#define pxa_gpio_suspend NULL
-#define pxa_gpio_resume NULL
-#endif
-
-struct syscore_ops pxa_gpio_syscore_ops = {
- .suspend = pxa_gpio_suspend,
- .resume = pxa_gpio_resume,
-};
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
new file mode 100644
index 0000000..b6390be
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
@@ -0,0 +1,44 @@
+#ifndef __PLAT_PXA_GPIO_H
+#define __PLAT_PXA_GPIO_H
+
+struct irq_data;
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+
+#endif /* __PLAT_PXA_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
index 1ddd2b9..258f772 100644
--- a/arch/arm/plat-pxa/include/plat/gpio.h
+++ b/arch/arm/plat-pxa/include/plat/gpio.h
@@ -1,35 +1,10 @@
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
-struct irq_data;
+#define __ARM_GPIOLIB_COMPLEX
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- * GPLR GPDR GPSR GPCR GRER GFER GEDR
- * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
- * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
- * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
- *
- * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
- * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
- * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
- *
- * NOTE:
- * BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
+/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
+#include <mach/gpio-pxa.h>
static inline int gpio_get_value(unsigned gpio)
{
@@ -52,13 +27,4 @@
#define gpio_cansleep __gpio_cansleep
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 89e68e0..5c79c29 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -456,7 +456,7 @@
#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
-void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_base(void __iomem *mfpr_base);
void __init mfp_init_addr(struct mfp_addr_map *map);
/*
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index be12ead..2c4dbb1 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -229,7 +229,7 @@
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
-void __init mfp_init_base(unsigned long mfpr_base)
+void __init mfp_init_base(void __iomem *mfpr_base)
{
int i;
@@ -237,7 +237,7 @@
for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
mfp_table[i].config = -1;
- mfpr_mmio_base = (void __iomem *)mfpr_base;
+ mfpr_mmio_base = mfpr_base;
}
void __init mfp_init_addr(struct mfp_addr_map *map)
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index c1fc6c6..3c63353 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -215,19 +215,18 @@
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode = 0x0;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
- idcode = s3c24xx_read_idcode_v5();
+ samsung_cpu_id = s3c24xx_read_idcode_v5();
} else {
- idcode = s3c24xx_read_idcode_v4();
+ samsung_cpu_id = s3c24xx_read_idcode_v4();
}
+ s3c24xx_init_cpu();
arm_pm_restart = s3c24xx_pm_restart;
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
deleted file mode 100644
index bd534d3..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/map.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S3C24XX_MAP_H
-#define __ASM_PLAT_S3C24XX_MAP_H
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART S3C_VA_UART
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_SZ_UART SZ_1M
-#define S3C_UART_OFFSET (0x4000)
-
-#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C24XX_SZ_CLKPWR SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_IIS SZ_1M
-#define S3C24XX_SZ_ADC SZ_1M
-#define S3C24XX_SZ_SPI SZ_1M
-#define S3C24XX_SZ_SDI SZ_1M
-#define S3C24XX_SZ_NAND SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO SZ_1M
-
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_PLAT_S3C24XX_MAP_H */
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index bbc2aa7..7b0a28f 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -33,48 +33,66 @@
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x56440100,
- .idmask = 0xfffff000,
+ .idcode = S5P6440_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6440_map_io,
.init_clocks = s5p6440_init_clocks,
.init_uarts = s5p6440_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6440,
}, {
- .idcode = 0x36450000,
- .idmask = 0xfffff000,
+ .idcode = S5P6450_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6450_map_io,
.init_clocks = s5p6450_init_clocks,
.init_uarts = s5p6450_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6450,
}, {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
}, {
- .idcode = 0x43110000,
- .idmask = 0xfffff000,
+ .idcode = S5PV210_CPU_ID,
+ .idmask = S5PV210_CPU_MASK,
.map_io = s5pv210_map_io,
.init_clocks = s5pv210_init_clocks,
.init_uarts = s5pv210_init_uarts,
.init = s5pv210_init,
.name = name_s5pv210,
}, {
- .idcode = 0x43210000,
- .idmask = 0xfffe0000,
+ .idcode = EXYNOS4210_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos4_init,
.name = name_exynos4210,
+ }, {
+ .idcode = EXYNOS4212_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4212,
+ }, {
+ .idcode = EXYNOS4412_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4412,
},
};
@@ -114,13 +132,13 @@
void __init s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr)
{
- unsigned long idcode;
-
/* initialize the io descriptors we need for initialization */
iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
if (mach_desc)
iotable_init(mach_desc, size);
- idcode = __raw_readl(cpuid_addr);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ /* detect cpu id and rev. */
+ s5p_init_cpu(cpuid_addr);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 907caab..f680a14 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -14,10 +14,11 @@
extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
extern void exynos4_setup_clocks(void);
-#ifdef CONFIG_CPU_EXYNOS4210
-
+#ifdef CONFIG_ARCH_EXYNOS4
extern int exynos4_init(void);
extern void exynos4_init_irq(void);
extern void exynos4_map_io(void);
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
deleted file mode 100644
index 36d3551..0000000
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_S5P_H
-#define __ASM_PLAT_MAP_S5P_H __FILE__
-
-#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
-#define S5P_VA_CMU S3C_ADDR(0x02100000)
-#define S5P_VA_PMU S3C_ADDR(0x02180000)
-#define S5P_VA_GPIO S3C_ADDR(0x02200000)
-#define S5P_VA_GPIO1 S5P_VA_GPIO
-#define S5P_VA_GPIO2 S3C_ADDR(0x02240000)
-#define S5P_VA_GPIO3 S3C_ADDR(0x02280000)
-
-#define S5P_VA_SYSRAM S3C_ADDR(0x02400000)
-#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
-#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
-#define S5P_VA_SROMC S3C_ADDR(0x024C0000)
-
-#define S5P_VA_SYSTIMER S3C_ADDR(0x02500000)
-#define S5P_VA_L2CC S3C_ADDR(0x02600000)
-
-#define S5P_VA_COMBINER_BASE S3C_ADDR(0x02700000)
-#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
-
-#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
-#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
-#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
-#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
-
-#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
-#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
-
-#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
-
-#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
-#define VA_VIC0 VA_VIC(0)
-#define VA_VIC1 VA_VIC(1)
-#define VA_VIC2 VA_VIC(2)
-#define VA_VIC3 VA_VIC(3)
-
-#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_VA_UART0 S5P_VA_UART(0)
-#define S5P_VA_UART1 S5P_VA_UART(1)
-#define S5P_VA_UART2 S5P_VA_UART(2)
-#define S5P_VA_UART3 S5P_VA_UART(3)
-
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET (0x400)
-#endif
-
-#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fad..3e21b94 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -12,6 +12,59 @@
* published by the Free Software Foundation.
*/
+#include <asm/div64.h>
+
+#define PLL35XX_MDIV_MASK (0x3FF)
+#define PLL35XX_PDIV_MASK (0x3F)
+#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_MDIV_SHIFT (16)
+#define PLL35XX_PDIV_SHIFT (8)
+#define PLL35XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK (0xFFFF)
+#define PLL36XX_MDIV_MASK (0x1FF)
+#define PLL36XX_PDIV_MASK (0x3F)
+#define PLL36XX_SDIV_MASK (0x7)
+#define PLL36XX_MDIV_SHIFT (16)
+#define PLL36XX_PDIV_SHIFT (8)
+#define PLL36XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+ tmp = baseclk;
+
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
+
#define PLL45XX_MDIV_MASK (0x3FF)
#define PLL45XX_PDIV_MASK (0x3F)
#define PLL45XX_SDIV_MASK (0x7)
@@ -19,8 +72,6 @@
#define PLL45XX_PDIV_SHIFT (8)
#define PLL45XX_SDIV_SHIFT (0)
-#include <asm/div64.h>
-
enum pll45xx_type_t {
pll_4500,
pll_4502,
@@ -72,7 +123,6 @@
mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
- kdiv = pll_con1 & PLL46XX_KDIV_MASK;
if (pll_type == pll_4650c)
kdiv = pll_con1 & PLL4650C_KDIV_MASK;
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index dffa37b..3895f9a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -362,4 +362,11 @@
help
Say Y here if you want to control Power Domain by Runtime PM.
+config DEBUG_S3C_UART
+ depends on PLAT_SAMSUNG
+ int
+ default "0" if DEBUG_S3C_UART0
+ default "1" if DEBUG_S3C_UART1
+ default "2" if DEBUG_S3C_UART2
+
endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 11059223..09adb84 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,7 +11,7 @@
# Objects we always build independent of SoC choice
-obj-y += init.o
+obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
new file mode 100644
index 0000000..81c06d4
--- /dev/null
+++ b/arch/arm/plat-samsung/cpu.c
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+ return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+ /* nothing here yet */
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+ if (!samsung_cpu_id) {
+ /*
+ * S3C6400 has the ID register in a different place,
+ * and needs a write before it can be read.
+ */
+ __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+ }
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+ samsung_cpu_id = __raw_readl(cpuid_addr);
+ samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index db7a65c..06825c4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -58,22 +58,5 @@
void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index 2497321..4524ef4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -58,22 +58,5 @@
void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index f60aedb..9cede96 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -59,22 +59,5 @@
void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
index ede776f..0358ef4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -62,22 +62,5 @@
void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 82543f0..5f3d46a 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -43,8 +43,17 @@
.resource = s3c_ts_resource,
};
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
{
+ if (!pd)
+ pd = &default_ts_data;
+
s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
&s3c_device_ts);
}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c0a5741..54f370f 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,9 +1,12 @@
/* linux/arch/arm/plat-samsung/include/plat/cpu.h
*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Header file for S3C24XX CPU support
+ * Header file for Samsung CPU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,6 +18,108 @@
#ifndef __SAMSUNG_PLAT_CPU_H
#define __SAMSUNG_PLAT_CPU_H
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID 0x32400000
+#define S3C24XX_CPU_MASK 0xFFF00000
+
+#define S3C6400_CPU_ID 0x36400000
+#define S3C6410_CPU_ID 0x36410000
+#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID)
+#define S3C64XX_CPU_MASK 0xFFFFF000
+
+#define S5P6440_CPU_ID 0x56440000
+#define S5P6450_CPU_ID 0x36450000
+#define S5P64XX_CPU_MASK 0xFFFFF000
+
+#define S5PC100_CPU_ID 0x43100000
+#define S5PC100_CPU_MASK 0xFFFFF000
+
+#define S5PV210_CPU_ID 0x43110000
+#define S5PV210_CPU_MASK 0xFFFFF000
+
+#define EXYNOS4210_CPU_ID 0x43210000
+#define EXYNOS4212_CPU_ID 0x43220000
+#define EXYNOS4412_CPU_ID 0xE4412200
+#define EXYNOS4_CPU_MASK 0xFFFE0000
+
+#define IS_SAMSUNG_CPU(name, id, mask) \
+static inline int is_samsung_##name(void) \
+{ \
+ return ((samsung_cpu_id & mask) == (id & mask)); \
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+ defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx() is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx() is_samsung_s3c64xx()
+#else
+# define soc_is_s3c64xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440() is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450() is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100() is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210() is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210() 0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210() is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212() is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412() is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412() 0
+#endif
+
+#define EXYNOS4210_REV_0 (0x0)
+#define EXYNOS4210_REV_1_0 (0x10)
+#define EXYNOS4210_REV_1_1 (0x11)
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
@@ -55,6 +160,12 @@
extern void s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr);
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
+extern unsigned int samsung_rev(void);
+
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c24xx_init_clocks(int xtal);
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 336d5ac..ab9bce63 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -18,11 +18,6 @@
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
-struct s3c24xx_dma_addr {
- unsigned long from;
- unsigned long to;
-};
-
/* struct s3c24xx_dma_map
*
* this holds the mapping information for the channel selected
@@ -31,7 +26,6 @@
struct s3c24xx_dma_map {
const char *name;
- struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C_DMA_CHANNELS];
unsigned long channels_rx[S3C_DMA_CHANNELS];
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
new file mode 100644
index 0000000..7d04875
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C24XX_VA_UART S3C_VA_UART
+
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_PA_UART S3C2410_PA_UART
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET (0x400)
+#endif
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
new file mode 100644
index 0000000..c2d7bda
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -0,0 +1,61 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
+#define S5P_VA_CMU S3C_ADDR(0x02100000)
+#define S5P_VA_PMU S3C_ADDR(0x02180000)
+#define S5P_VA_GPIO S3C_ADDR(0x02200000)
+#define S5P_VA_GPIO1 S5P_VA_GPIO
+#define S5P_VA_GPIO2 S3C_ADDR(0x02240000)
+#define S5P_VA_GPIO3 S3C_ADDR(0x02280000)
+
+#define S5P_VA_SYSRAM S3C_ADDR(0x02400000)
+#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
+#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
+#define S5P_VA_SROMC S3C_ADDR(0x024C0000)
+
+#define S5P_VA_SYSTIMER S3C_ADDR(0x02500000)
+#define S5P_VA_L2CC S3C_ADDR(0x02600000)
+
+#define S5P_VA_COMBINER_BASE S3C_ADDR(0x02700000)
+#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
+
+#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
+#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
+#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
+#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
+
+#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
+#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
+
+#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0 VA_VIC(0)
+#define VA_VIC1 VA_VIC(1)
+#define VA_VIC2 VA_VIC(2)
+#define VA_VIC3 VA_VIC(3)
+
+#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_VA_UART0 S5P_VA_UART(0)
+#define S5P_VA_UART1 S5P_VA_UART(1)
+#define S5P_VA_UART2 S5P_VA_UART(2)
+#define S5P_VA_UART3 S5P_VA_UART(3)
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET (0x400)
+#endif
+
+#include <plat/map-s3c.h>
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 058e096..4a65520 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -86,6 +86,13 @@
struct mmc_card *card);
};
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set);
+
/**
* s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
* @pd: Platform data to register to device.
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 7cf2e1e..6de1a38 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <plat/devs.h>
+#include <plat/sdhci.h>
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
@@ -35,3 +36,24 @@
pdev->dev.platform_data = npd;
return npd;
}
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set)
+{
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+ if (pd->max_width)
+ set->max_width = pd->max_width;
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+ if (pd->host_caps)
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
+}
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 8501bbf..02b160a 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,7 +14,7 @@
#include <linux/amba/serial.h>
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.endm
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
index b857c91..40a8c178 100644
--- a/arch/arm/plat-spear/include/plat/gpio.h
+++ b/arch/arm/plat-spear/include/plat/gpio.h
@@ -1,24 +1 @@
-/*
- * arch/arm/plat-spear/include/plat/gpio.h
- *
- * GPIO macros for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __PLAT_GPIO_H */
+/* empty */
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
deleted file mode 100644
index 7e3599e..0000000
--- a/arch/arm/plat-spear/include/plat/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/memory.h
- *
- * Memory map for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_MEMORY_H
-#define __PLAT_MEMORY_H
-
-/* Physical DRAM offset */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
index 7662f73..cf17d04 100644
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
moveq \rp, #0x90000000 @ physical base address
movne \rv, #0xF1000000 @ virtual base
orr \rp, \rp, #0x00007000 @ UART0
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
deleted file mode 100644
index 28a6e0c..0000000
--- a/arch/arm/plat-tcc/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-#endif
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index 51ecfea..92f18d3 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -77,7 +77,7 @@
* since we haven't sent them a soft interrupt, they shouldn't
* be there.
*/
- write_pen_release(cpu);
+ write_pen_release(cpu_logical_map(cpu));
/*
* Send the secondary CPU a soft interrupt, thereby causing
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 79bcb43..0cbd5a0 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/signal.h>
@@ -68,7 +69,7 @@
/*
* Force a reload of the VFP context from the thread structure. We do
* this by ensuring that access to the VFP hardware is disabled, and
- * clear last_VFP_context. Must be called from non-preemptible context.
+ * clear vfp_current_hw_state. Must be called from non-preemptible context.
*/
static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
{
@@ -436,9 +437,7 @@
set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
}
-#ifdef CONFIG_PM
-#include <linux/syscore_ops.h>
-
+#ifdef CONFIG_CPU_PM
static int vfp_pm_suspend(void)
{
struct thread_info *ti = current_thread_info();
@@ -468,19 +467,33 @@
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
}
-static struct syscore_ops vfp_pm_syscore_ops = {
- .suspend = vfp_pm_suspend,
- .resume = vfp_pm_resume,
+static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd,
+ void *v)
+{
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ vfp_pm_suspend();
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ vfp_pm_resume();
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block vfp_cpu_pm_notifier_block = {
+ .notifier_call = vfp_cpu_pm_notifier,
};
static void vfp_pm_init(void)
{
- register_syscore_ops(&vfp_pm_syscore_ops);
+ cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block);
}
#else
static inline void vfp_pm_init(void) { }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_CPU_PM */
/*
* Ensure that the VFP state stored in 'thread->vfpstate' is up to date
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index b9f9c8c..b579dd0 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -694,7 +694,7 @@
/* Valid mem address. */
for (i = 0; i < count; i++) {
ch = *mem++;
- buf = pack_hex_byte(buf, ch);
+ buf = hex_byte_pack(buf, ch);
}
}
@@ -868,7 +868,7 @@
/* Send trap type (converted to signal) */
*ptr++ = 'T';
- ptr = pack_hex_byte(ptr, sigval);
+ ptr = hex_byte_pack(ptr, sigval);
/* Send register contents. We probably only need to send the
* PC, frame pointer and stack pointer here. Other registers will be
@@ -881,7 +881,7 @@
status = read_register (regno, ®_cont);
if (status == SUCCESS) {
- ptr = pack_hex_byte(ptr, regno);
+ ptr = hex_byte_pack(ptr, regno);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)®_cont,
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index c0343c3..8c1d35c 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -677,7 +677,7 @@
/* Valid mem address. */
for (i = 0; i < count; i++) {
ch = *mem++;
- buf = pack_hex_byte(buf, ch);
+ buf = hex_byte_pack(buf, ch);
}
}
/* Terminate properly. */
@@ -695,7 +695,7 @@
mem += count - 1;
for (i = 0; i < count; i++) {
ch = *mem--;
- buf = pack_hex_byte(buf, ch);
+ buf = hex_byte_pack(buf, ch);
}
/* Terminate properly. */
@@ -880,7 +880,7 @@
/* Send trap type (converted to signal) */
*ptr++ = 'T';
- ptr = pack_hex_byte(ptr, sigval);
+ ptr = hex_byte_pack(ptr, sigval);
if (((reg.exs & 0xff00) >> 8) == 0xc) {
@@ -988,26 +988,26 @@
}
/* Only send PC, frame and stack pointer. */
read_register(PC, ®_cont);
- ptr = pack_hex_byte(ptr, PC);
+ ptr = hex_byte_pack(ptr, PC);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[PC]);
*ptr++ = ';';
read_register(R8, ®_cont);
- ptr = pack_hex_byte(ptr, R8);
+ ptr = hex_byte_pack(ptr, R8);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[R8]);
*ptr++ = ';';
read_register(SP, ®_cont);
- ptr = pack_hex_byte(ptr, SP);
+ ptr = hex_byte_pack(ptr, SP);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[SP]);
*ptr++ = ';';
/* Send ERP as well; this will save us an entire register fetch in some cases. */
read_register(ERP, ®_cont);
- ptr = pack_hex_byte(ptr, ERP);
+ ptr = hex_byte_pack(ptr, ERP);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[ERP]);
*ptr++ = ';';
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index a4dba6b..a6d5381 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -672,7 +672,7 @@
if ((uint32_t)mem&1 && count>=1) {
if (!gdbstub_read_byte(mem,ch))
return NULL;
- buf = pack_hex_byte(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[0]);
mem++;
count--;
}
@@ -680,8 +680,8 @@
if ((uint32_t)mem&3 && count>=2) {
if (!gdbstub_read_word(mem,(uint16_t *)ch))
return NULL;
- buf = pack_hex_byte(buf, ch[0]);
- buf = pack_hex_byte(buf, ch[1]);
+ buf = hex_byte_pack(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[1]);
mem += 2;
count -= 2;
}
@@ -689,10 +689,10 @@
while (count>=4) {
if (!gdbstub_read_dword(mem,(uint32_t *)ch))
return NULL;
- buf = pack_hex_byte(buf, ch[0]);
- buf = pack_hex_byte(buf, ch[1]);
- buf = pack_hex_byte(buf, ch[2]);
- buf = pack_hex_byte(buf, ch[3]);
+ buf = hex_byte_pack(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[1]);
+ buf = hex_byte_pack(buf, ch[2]);
+ buf = hex_byte_pack(buf, ch[3]);
mem += 4;
count -= 4;
}
@@ -700,8 +700,8 @@
if (count>=2) {
if (!gdbstub_read_word(mem,(uint16_t *)ch))
return NULL;
- buf = pack_hex_byte(buf, ch[0]);
- buf = pack_hex_byte(buf, ch[1]);
+ buf = hex_byte_pack(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[1]);
mem += 2;
count -= 2;
}
@@ -709,7 +709,7 @@
if (count>=1) {
if (!gdbstub_read_byte(mem,ch))
return NULL;
- buf = pack_hex_byte(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[0]);
}
*buf = 0;
@@ -1498,21 +1498,21 @@
ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
hx = hex_asc_hi(brr >> 24);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(brr >> 24);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_hi(brr >> 16);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(brr >> 16);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_hi(brr >> 8);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(brr >> 8);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_hi(brr);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(brr);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
*ptr = 0;
@@ -1526,10 +1526,10 @@
/* Send trap type (converted to signal) */
*ptr++ = 'T';
- ptr = pack_hex_byte(ptr, sigval);
+ ptr = hex_byte_pack(ptr, sigval);
/* Send Error PC */
- ptr = pack_hex_byte(ptr, GDB_REG_PC);
+ ptr = hex_byte_pack(ptr, GDB_REG_PC);
*ptr++ = ':';
ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
*ptr++ = ';';
@@ -1537,7 +1537,7 @@
/*
* Send frame pointer
*/
- ptr = pack_hex_byte(ptr, GDB_REG_FP);
+ ptr = hex_byte_pack(ptr, GDB_REG_FP);
*ptr++ = ':';
ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
*ptr++ = ';';
@@ -1545,7 +1545,7 @@
/*
* Send stack pointer
*/
- ptr = pack_hex_byte(ptr, GDB_REG_SP);
+ ptr = hex_byte_pack(ptr, GDB_REG_SP);
*ptr++ = ':';
ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
*ptr++ = ';';
diff --git a/arch/h8300/include/asm/gpio.h b/arch/h8300/include/asm/gpio-internal.h
similarity index 100%
rename from arch/h8300/include/asm/gpio.h
rename to arch/h8300/include/asm/gpio-internal.h
diff --git a/arch/h8300/platform/h8300h/irq.c b/arch/h8300/platform/h8300h/irq.c
index e977345..bc4f51b 100644
--- a/arch/h8300/platform/h8300h/irq.c
+++ b/arch/h8300/platform/h8300h/irq.c
@@ -11,7 +11,7 @@
#include <asm/traps.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/gpio.h>
+#include <asm/gpio-internal.h>
#include <asm/regs306x.h>
const int __initdata h8300_saved_vectors[] = {
diff --git a/arch/h8300/platform/h8s/irq.c b/arch/h8300/platform/h8s/irq.c
index 8182f04..7b5f29f 100644
--- a/arch/h8300/platform/h8s/irq.c
+++ b/arch/h8300/platform/h8s/irq.c
@@ -14,7 +14,7 @@
#include <asm/traps.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/gpio.h>
+#include <asm/gpio-internal.h>
#include <asm/regs267x.h>
/* saved vector list */
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
new file mode 100644
index 0000000..02513c2
--- /dev/null
+++ b/arch/hexagon/Kconfig
@@ -0,0 +1,220 @@
+# Hexagon configuration
+comment "Linux Kernel Configuration for Hexagon"
+
+config HEXAGON
+ def_bool y
+ select HAVE_OPROFILE
+ select USE_GENERIC_SMP_HELPERS if SMP
+ # Other pending projects/to-do items.
+ # select HAVE_REGS_AND_STACK_ACCESS_API
+ # select HAVE_HW_BREAKPOINT if PERF_EVENTS
+ # select ARCH_HAS_CPU_IDLE_WAIT
+ # select ARCH_WANT_OPTIONAL_GPIOLIB
+ # select ARCH_REQUIRE_GPIOLIB
+ # select HAVE_CLK
+ # select IRQ_PER_CPU
+ select HAVE_IRQ_WORK
+ # select GENERIC_PENDING_IRQ if SMP
+ select GENERIC_ATOMIC64
+ select HAVE_PERF_EVENTS
+ select HAVE_GENERIC_HARDIRQS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GENERIC_HARDIRQS_NO_DEPRECATED
+ # GENERIC_ALLOCATOR is used by dma_alloc_coherent()
+ select GENERIC_ALLOCATOR
+ select GENERIC_IRQ_SHOW
+ select HAVE_ARCH_KGDB
+ select HAVE_ARCH_TRACEHOOK
+ select NO_IOPORT
+ # mostly generic routines, with some accelerated ones
+ ---help---
+ Qualcomm Hexagon is a processor architecture designed for high
+ performance and low power across a wide variety of applications.
+
+config HEXAGON_ARCH_V1
+ bool
+
+config HEXAGON_ARCH_V2
+ bool
+
+config HEXAGON_ARCH_V3
+ bool
+
+config HEXAGON_ARCH_V4
+ bool
+
+config FRAME_POINTER
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config PCI
+ def_bool n
+
+config EARLY_PRINTK
+ def_bool y
+
+config KTIME_SCALAR
+ def_bool y
+
+config MMU
+ def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
+
+config GENERIC_CSUM
+ def_bool y
+
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_IRQ_PROBE
+ def_bool y
+
+config GENERIC_IOMAP
+ def_bool y
+
+#config ZONE_DMA
+# bool
+# default y
+
+config HAS_DMA
+ bool
+ select HAVE_DMA_ATTRS
+ default y
+
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool n
+
+config RWSEM_XCHGADD_ALGORITHM
+ def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config GENERIC_CLOCKEVENTS
+ def_bool y
+
+config GENERIC_CLOCKEVENTS_BROADCAST
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+ select STACKTRACE
+
+config GENERIC_BUG
+ def_bool y
+ depends on BUG
+
+config BUG
+ def_bool y
+
+menu "Machine selection"
+
+choice
+ prompt "System type"
+ default HEXAGON_ARCH_V2
+
+config HEXAGON_COMET
+ bool "Comet Board"
+ select HEXAGON_ARCH_V2
+ ---help---
+ Support for the Comet platform.
+
+endchoice
+
+config HEXAGON_VM
+ def_bool y
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some platforms, there is currently no way for the boot loader
+ to pass arguments to the kernel. For these, you should supply some
+ command-line options at build time by entering them here. At a
+ minimum, you should specify the memory size and the root device
+ (e.g., mem=64M root=/dev/nfs).
+
+config HEXAGON_ANGEL_TRAPS
+ bool "Use Angel Traps"
+ default n
+ ---help---
+ Enable angel debug traps (for printk's).
+
+config SMP
+ bool "Multi-Processing support"
+ ---help---
+ Enables SMP support in the kernel. If unsure, say "Y"
+
+config NR_CPUS
+ int "Maximum number of CPUs" if SMP
+ range 2 6 if SMP
+ default "1" if !SMP
+ default "6" if SMP
+ ---help---
+ This allows you to specify the maximum number of CPUs which this
+ kernel will support. The maximum supported value is 6 and the
+ minimum value which makes sense is 2.
+
+ This is purely to save memory - each supported CPU adds
+ approximately eight kilobytes to the kernel image.
+
+choice
+ prompt "Kernel page size"
+ default PAGE_SIZE_4KB
+ ---help---
+ Changes the default page size; use with caution.
+
+config PAGE_SIZE_4KB
+ bool "4KB"
+
+config PAGE_SIZE_16KB
+ bool "16KB"
+
+config PAGE_SIZE_64KB
+ bool "64KB"
+
+config PAGE_SIZE_256KB
+ bool "256KB"
+
+endchoice
+
+source "mm/Kconfig"
+
+source "kernel/Kconfig.hz"
+source "kernel/time/Kconfig"
+
+config GENERIC_GPIO
+ bool "Generic GPIO support"
+ default n
+
+endmenu
+
+source "init/Kconfig"
+source "drivers/Kconfig"
+source "fs/Kconfig"
+
+menu "Executable File Formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+source "net/Kconfig"
+source "security/Kconfig"
+source "crypto/Kconfig"
+source "lib/Kconfig"
+
+menu "Kernel hacking"
+source "lib/Kconfig.debug"
+endmenu
diff --git a/arch/hexagon/Makefile b/arch/hexagon/Makefile
new file mode 100644
index 0000000..0c4de87
--- /dev/null
+++ b/arch/hexagon/Makefile
@@ -0,0 +1,58 @@
+# Makefile for the Hexagon arch
+
+KBUILD_DEFCONFIG = comet_defconfig
+
+# Do not use GP-relative jumps
+KBUILD_CFLAGS += -G0
+LDFLAGS_vmlinux += -G0
+
+# Do not use single-byte enums; these will overflow.
+KBUILD_CFLAGS += -fno-short-enums
+
+# Modules must use either long-calls, or use pic/plt.
+# Use long-calls for now, it's easier. And faster.
+# CFLAGS_MODULE += -fPIC
+# LDFLAGS_MODULE += -shared
+CFLAGS_MODULE += -mlong-calls
+
+cflags-$(CONFIG_HEXAGON_ARCH_V1) += $(call cc-option,-mv1)
+cflags-$(CONFIG_HEXAGON_ARCH_V2) += $(call cc-option,-mv2)
+cflags-$(CONFIG_HEXAGON_ARCH_V3) += $(call cc-option,-mv3)
+cflags-$(CONFIG_HEXAGON_ARCH_V4) += $(call cc-option,-mv4)
+
+aflags-$(CONFIG_HEXAGON_ARCH_V1) += $(call cc-option,-mv1)
+aflags-$(CONFIG_HEXAGON_ARCH_V2) += $(call cc-option,-mv2)
+aflags-$(CONFIG_HEXAGON_ARCH_V3) += $(call cc-option,-mv3)
+aflags-$(CONFIG_HEXAGON_ARCH_V4) += $(call cc-option,-mv4)
+
+ldflags-$(CONFIG_HEXAGON_ARCH_V1) += $(call cc-option,-mv1)
+ldflags-$(CONFIG_HEXAGON_ARCH_V2) += $(call cc-option,-mv2)
+ldflags-$(CONFIG_HEXAGON_ARCH_V3) += $(call cc-option,-mv3)
+ldflags-$(CONFIG_HEXAGON_ARCH_V4) += $(call cc-option,-mv4)
+
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_AFLAGS += $(aflags-y)
+
+# no KBUILD_LDFLAGS?
+LDFLAGS += $(ldflags-y)
+
+# Thread-info register will be r19. This value is not configureable;
+# it is hard-coded in several files.
+TIR_NAME := r19
+KBUILD_CFLAGS += -ffixed-$(TIR_NAME) -DTHREADINFO_REG=$(TIR_NAME) -D__linux__
+KBUILD_AFLAGS += -DTHREADINFO_REG=$(TIR_NAME)
+
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+libs-y += $(LIBGCC)
+
+head-y := arch/hexagon/kernel/head.o \
+ arch/hexagon/kernel/init_task.o
+
+core-y += arch/hexagon/kernel/ \
+ arch/hexagon/mm/ \
+ arch/hexagon/lib/
+
+# arch/hexagon/platform/common/
+#
+#core-$(CONFIG_HEXAGON_COMET) += arch/hexagon/platform/comet/
+#machine-$(CONFIG_HEXAGON_COMET) := comet
diff --git a/arch/hexagon/configs/comet_defconfig b/arch/hexagon/configs/comet_defconfig
new file mode 100644
index 0000000..e324f65
--- /dev/null
+++ b/arch/hexagon/configs/comet_defconfig
@@ -0,0 +1,85 @@
+CONFIG_SMP=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_CROSS_COMPILE="hexagon-"
+CONFIG_LOCALVERSION="-smp"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=y
+CONFIG_FRAME_WARN=0
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
new file mode 100644
index 0000000..9aa17f1
--- /dev/null
+++ b/arch/hexagon/include/asm/Kbuild
@@ -0,0 +1,58 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += registers.h
+header-y += ucontext.h
+header-y += user.h
+
+generic-y += auxvec.h
+generic-y += bug.h
+generic-y += bugs.h
+generic-y += cpumask.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += hardirq.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += iomap.h
+generic-y += ipcbuf.h
+generic-y += ipc.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += local64.h
+generic-y += local.h
+generic-y += local.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += pci.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += rwsem.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += statfs.h
+generic-y += stat.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += types.h
+generic-y += ucontext.h
+generic-y += unaligned.h
+generic-y += xor.h
diff --git a/arch/hexagon/include/asm/asm-offsets.h b/arch/hexagon/include/asm/asm-offsets.h
new file mode 100644
index 0000000..d370ee3
--- /dev/null
+++ b/arch/hexagon/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/hexagon/include/asm/atomic.h b/arch/hexagon/include/asm/atomic.h
new file mode 100644
index 0000000..e220f90
--- /dev/null
+++ b/arch/hexagon/include/asm/atomic.h
@@ -0,0 +1,164 @@
+/*
+ * Atomic operations for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/types.h>
+
+#define ATOMIC_INIT(i) { (i) }
+#define atomic_set(v, i) ((v)->counter = (i))
+
+/**
+ * atomic_read - reads a word, atomically
+ * @v: pointer to atomic value
+ *
+ * Assumes all word reads on our architecture are atomic.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/**
+ * atomic_xchg - atomic
+ * @v: pointer to memory to change
+ * @new: new value (technically passed in a register -- see xchg)
+ */
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+
+/**
+ * atomic_cmpxchg - atomic compare-and-exchange values
+ * @v: pointer to value to change
+ * @old: desired old value to match
+ * @new: new value to put in
+ *
+ * Parameters are then pointer, value-in-register, value-in-register,
+ * and the output is the old value.
+ *
+ * Apparently this is complicated for archs that don't support
+ * the memw_locked like we do (or it's broken or whatever).
+ *
+ * Kind of the lynchpin of the rest of the generically defined routines.
+ * Remember V2 had that bug with dotnew predicate set by memw_locked.
+ *
+ * "old" is "expected" old val, __oldval is actual old value
+ */
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ int __oldval;
+
+ asm volatile(
+ "1: %0 = memw_locked(%1);\n"
+ " { P0 = cmp.eq(%0,%2);\n"
+ " if (!P0.new) jump:nt 2f; }\n"
+ " memw_locked(%1,P0) = %3;\n"
+ " if (!P0) jump 1b;\n"
+ "2:\n"
+ : "=&r" (__oldval)
+ : "r" (&v->counter), "r" (old), "r" (new)
+ : "memory", "p0"
+ );
+
+ return __oldval;
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ int output;
+
+ __asm__ __volatile__ (
+ "1: %0 = memw_locked(%1);\n"
+ " %0 = add(%0,%2);\n"
+ " memw_locked(%1,P3)=%0;\n"
+ " if !P3 jump 1b;\n"
+ : "=&r" (output)
+ : "r" (&v->counter), "r" (i)
+ : "memory", "p3"
+ );
+ return output;
+
+}
+
+#define atomic_add(i, v) atomic_add_return(i, (v))
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ int output;
+ __asm__ __volatile__ (
+ "1: %0 = memw_locked(%1);\n"
+ " %0 = sub(%0,%2);\n"
+ " memw_locked(%1,P3)=%0\n"
+ " if !P3 jump 1b;\n"
+ : "=&r" (output)
+ : "r" (&v->counter), "r" (i)
+ : "memory", "p3"
+ );
+ return output;
+}
+
+#define atomic_sub(i, v) atomic_sub_return(i, (v))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer to value
+ * @a: amount to add
+ * @u: unless value is equal to u
+ *
+ * Returns 1 if the add happened, 0 if it didn't.
+ */
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int output, __oldval;
+ asm volatile(
+ "1: %0 = memw_locked(%2);"
+ " {"
+ " p3 = cmp.eq(%0, %4);"
+ " if (p3.new) jump:nt 2f;"
+ " %0 = add(%0, %3);"
+ " %1 = #0;"
+ " }"
+ " memw_locked(%2, p3) = %0;"
+ " {"
+ " if !p3 jump 1b;"
+ " %1 = #1;"
+ " }"
+ "2:"
+ : "=&r" (__oldval), "=&r" (output)
+ : "r" (v), "r" (a), "r" (u)
+ : "memory", "p3"
+ );
+ return output;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_inc(v) atomic_add(1, (v))
+#define atomic_dec(v) atomic_sub(1, (v))
+
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, (v)) == 0)
+#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0)
+
+
+#define atomic_inc_return(v) (atomic_add_return(1, v))
+#define atomic_dec_return(v) (atomic_sub_return(1, v))
+
+#endif
diff --git a/arch/hexagon/include/asm/bitops.h b/arch/hexagon/include/asm/bitops.h
new file mode 100644
index 0000000..d23461e
--- /dev/null
+++ b/arch/hexagon/include/asm/bitops.h
@@ -0,0 +1,301 @@
+/*
+ * Bit operations for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+
+#ifdef __KERNEL__
+
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+/*
+ * The offset calculations for these are based on BITS_PER_LONG == 32
+ * (i.e. I get to shift by #5-2 (32 bits per long, 4 bytes per access),
+ * mask by 0x0000001F)
+ *
+ * Typically, R10 is clobbered for address, R11 bit nr, and R12 is temp
+ */
+
+/**
+ * test_and_clear_bit - clear a bit and return its old value
+ * @nr: bit number to clear
+ * @addr: pointer to memory
+ */
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+ int oldval;
+
+ __asm__ __volatile__ (
+ " {R10 = %1; R11 = asr(%2,#5); }\n"
+ " {R10 += asl(R11,#2); R11 = and(%2,#0x1f)}\n"
+ "1: R12 = memw_locked(R10);\n"
+ " { P0 = tstbit(R12,R11); R12 = clrbit(R12,R11); }\n"
+ " memw_locked(R10,P1) = R12;\n"
+ " {if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+ : "=&r" (oldval)
+ : "r" (addr), "r" (nr)
+ : "r10", "r11", "r12", "p0", "p1", "memory"
+ );
+
+ return oldval;
+}
+
+/**
+ * test_and_set_bit - set a bit and return its old value
+ * @nr: bit number to set
+ * @addr: pointer to memory
+ */
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+ int oldval;
+
+ __asm__ __volatile__ (
+ " {R10 = %1; R11 = asr(%2,#5); }\n"
+ " {R10 += asl(R11,#2); R11 = and(%2,#0x1f)}\n"
+ "1: R12 = memw_locked(R10);\n"
+ " { P0 = tstbit(R12,R11); R12 = setbit(R12,R11); }\n"
+ " memw_locked(R10,P1) = R12;\n"
+ " {if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+ : "=&r" (oldval)
+ : "r" (addr), "r" (nr)
+ : "r10", "r11", "r12", "p0", "p1", "memory"
+ );
+
+
+ return oldval;
+
+}
+
+/**
+ * test_and_change_bit - toggle a bit and return its old value
+ * @nr: bit number to set
+ * @addr: pointer to memory
+ */
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+ int oldval;
+
+ __asm__ __volatile__ (
+ " {R10 = %1; R11 = asr(%2,#5); }\n"
+ " {R10 += asl(R11,#2); R11 = and(%2,#0x1f)}\n"
+ "1: R12 = memw_locked(R10);\n"
+ " { P0 = tstbit(R12,R11); R12 = togglebit(R12,R11); }\n"
+ " memw_locked(R10,P1) = R12;\n"
+ " {if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+ : "=&r" (oldval)
+ : "r" (addr), "r" (nr)
+ : "r10", "r11", "r12", "p0", "p1", "memory"
+ );
+
+ return oldval;
+
+}
+
+/*
+ * Atomic, but doesn't care about the return value.
+ * Rewrite later to save a cycle or two.
+ */
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+ test_and_clear_bit(nr, addr);
+}
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+ test_and_set_bit(nr, addr);
+}
+
+static inline void change_bit(int nr, volatile void *addr)
+{
+ test_and_change_bit(nr, addr);
+}
+
+
+/*
+ * These are allowed to be non-atomic. In fact the generic flavors are
+ * in non-atomic.h. Would it be better to use intrinsics for this?
+ *
+ * OK, writes in our architecture do not invalidate LL/SC, so this has to
+ * be atomic, particularly for things like slab_lock and slab_unlock.
+ *
+ */
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+ test_and_clear_bit(nr, addr);
+}
+
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+ test_and_set_bit(nr, addr);
+}
+
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+ test_and_change_bit(nr, addr);
+}
+
+/* Apparently, at least some of these are allowed to be non-atomic */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ return test_and_clear_bit(nr, addr);
+}
+
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ return test_and_set_bit(nr, addr);
+}
+
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+ return test_and_change_bit(nr, addr);
+}
+
+static inline int __test_bit(int nr, const volatile unsigned long *addr)
+{
+ int retval;
+
+ asm volatile(
+ "{P0 = tstbit(%1,%2); if (P0.new) %0 = #1; if (!P0.new) %0 = #0;}\n"
+ : "=&r" (retval)
+ : "r" (addr[BIT_WORD(nr)]), "r" (nr % BITS_PER_LONG)
+ : "p0"
+ );
+
+ return retval;
+}
+
+#define test_bit(nr, addr) __test_bit(nr, addr)
+
+/*
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline long ffz(int x)
+{
+ int r;
+
+ asm("%0 = ct1(%1);\n"
+ : "=&r" (r)
+ : "r" (x));
+ return r;
+}
+
+/*
+ * fls - find last (most-significant) bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static inline long fls(int x)
+{
+ int r;
+
+ asm("{ %0 = cl0(%1);}\n"
+ "%0 = sub(#32,%0);\n"
+ : "=&r" (r)
+ : "r" (x)
+ : "p0");
+
+ return r;
+}
+
+/*
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline long ffs(int x)
+{
+ int r;
+
+ asm("{ P0 = cmp.eq(%1,#0); %0 = ct0(%1);}\n"
+ "{ if P0 %0 = #0; if !P0 %0 = add(%0,#1);}\n"
+ : "=&r" (r)
+ : "r" (x)
+ : "p0");
+
+ return r;
+}
+
+/*
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ *
+ * bits_per_long assumed to be 32
+ * numbering starts at 0 I think (instead of 1 like ffs)
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+ int num;
+
+ asm("%0 = ct0(%1);\n"
+ : "=&r" (num)
+ : "r" (word));
+
+ return num;
+}
+
+/*
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ * bits_per_long assumed to be 32
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+ int num;
+
+ asm("%0 = cl0(%1);\n"
+ "%0 = sub(#31,%0);\n"
+ : "=&r" (num)
+ : "r" (word));
+
+ return num;
+}
+
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/find.h>
+
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/hexagon/include/asm/bitsperlong.h b/arch/hexagon/include/asm/bitsperlong.h
new file mode 100644
index 0000000..2701cae
--- /dev/null
+++ b/arch/hexagon/include/asm/bitsperlong.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ASM_HEXAGON_BITSPERLONG_H
+#define __ASM_HEXAGON_BITSPERLONG_H
+
+#define __BITS_PER_LONG 32
+
+#include <asm-generic/bitsperlong.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/byteorder.h b/arch/hexagon/include/asm/byteorder.h
new file mode 100644
index 0000000..0e19b9f
--- /dev/null
+++ b/arch/hexagon/include/asm/byteorder.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+#endif
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/hexagon/include/asm/cache.h b/arch/hexagon/include/asm/cache.h
new file mode 100644
index 0000000..0f01de2
--- /dev/null
+++ b/arch/hexagon/include/asm/cache.h
@@ -0,0 +1,34 @@
+/*
+ * Cache definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+/* Bytes per L1 cache line */
+#define L1_CACHE_SHIFT (5)
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned __aligned(L1_CACHE_BYTES)
+#define ____cacheline_aligned __aligned(L1_CACHE_BYTES)
+
+/* See http://kerneltrap.org/node/15100 */
+#define __read_mostly
+
+#endif
diff --git a/arch/hexagon/include/asm/cacheflush.h b/arch/hexagon/include/asm/cacheflush.h
new file mode 100644
index 0000000..6865c1b
--- /dev/null
+++ b/arch/hexagon/include/asm/cacheflush.h
@@ -0,0 +1,99 @@
+/*
+ * Cache flush operations for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#include <linux/cache.h>
+#include <linux/mm.h>
+#include <asm/string.h>
+#include <asm-generic/cacheflush.h>
+
+/* Cache flushing:
+ *
+ * - flush_cache_all() flushes entire cache
+ * - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ * - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ * - flush_cache_range(vma, start, end) flushes a range of pages
+ * - flush_icache_range(start, end) flush a range of instructions
+ * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ * Need to doublecheck which one is really needed for ptrace stuff to work.
+ */
+#define LINESIZE 32
+#define LINEBITS 5
+
+/*
+ * Flush Dcache range through current map.
+ */
+extern void flush_dcache_range(unsigned long start, unsigned long end);
+
+/*
+ * Flush Icache range through current map.
+ */
+#undef flush_icache_range
+extern void flush_icache_range(unsigned long start, unsigned long end);
+
+/*
+ * Memory-management related flushes are there to ensure in non-physically
+ * indexed cache schemes that stale lines belonging to a given ASID aren't
+ * in the cache to confuse things. The prototype Hexagon Virtual Machine
+ * only uses a single ASID for all user-mode maps, which should
+ * mean that they aren't necessary. A brute-force, flush-everything
+ * implementation, with the name xxxxx_hexagon() is present in
+ * arch/hexagon/mm/cache.c, but let's not wire it up until we know
+ * it is needed.
+ */
+extern void flush_cache_all_hexagon(void);
+
+/*
+ * This may or may not ever have to be non-null, depending on the
+ * virtual machine MMU. For a native kernel, it's definitiely a no-op
+ *
+ * This is also the place where deferred cache coherency stuff seems
+ * to happen, classically... but instead we do it like ia64 and
+ * clean the cache when the PTE is set.
+ *
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep)
+{
+ /* generic_ptrace_pokedata doesn't wind up here, does it? */
+}
+
+#undef copy_to_user_page
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page,
+ unsigned long vaddr,
+ void *dst, void *src, int len)
+{
+ memcpy(dst, src, len);
+ if (vma->vm_flags & VM_EXEC) {
+ flush_icache_range((unsigned long) dst,
+ (unsigned long) dst + len);
+ }
+}
+
+
+extern void hexagon_inv_dcache_range(unsigned long start, unsigned long end);
+extern void hexagon_clean_dcache_range(unsigned long start, unsigned long end);
+
+#endif
diff --git a/arch/hexagon/include/asm/checksum.h b/arch/hexagon/include/asm/checksum.h
new file mode 100644
index 0000000..3ce4ecd
--- /dev/null
+++ b/arch/hexagon/include/asm/checksum.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#define do_csum do_csum
+unsigned int do_csum(const void *voidptr, int len);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+#define csum_partial_copy_nocheck csum_partial_copy_nocheck
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+#define csum_tcpudp_nofold csum_tcpudp_nofold
+__wsum csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
+ unsigned short len, unsigned short proto, __wsum sum);
+
+#define csum_tcpudp_magic csum_tcpudp_magic
+__sum16 csum_tcpudp_magic(unsigned long saddr, unsigned long daddr,
+ unsigned short len, unsigned short proto, __wsum sum);
+
+#include <asm-generic/checksum.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/delay.h b/arch/hexagon/include/asm/delay.h
new file mode 100644
index 0000000..9ab12e9
--- /dev/null
+++ b/arch/hexagon/include/asm/delay.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <asm/param.h>
+
+extern void __udelay(unsigned long usecs);
+
+#define udelay(usecs) __udelay((usecs))
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/hexagon/include/asm/dma-mapping.h b/arch/hexagon/include/asm/dma-mapping.h
new file mode 100644
index 0000000..448b224
--- /dev/null
+++ b/arch/hexagon/include/asm/dma-mapping.h
@@ -0,0 +1,101 @@
+/*
+ * DMA operations for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+
+struct device;
+extern int bad_dma_address;
+
+extern struct dma_map_ops *dma_ops;
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+ if (unlikely(dev == NULL))
+ return NULL;
+
+ return dma_ops;
+}
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 mask);
+extern int dma_is_consistent(struct device *dev, dma_addr_t dma_handle);
+extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction direction);
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ if (!dev->dma_mask)
+ return 0;
+ return addr + size - 1 <= *dev->dma_mask;
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+ if (dma_ops->mapping_error)
+ return dma_ops->mapping_error(dev, dma_addr);
+
+ return (dma_addr == bad_dma_address);
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+{
+ void *ret;
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+
+ ret = ops->alloc_coherent(dev, size, dma_handle, flag);
+
+ debug_dma_alloc_coherent(dev, size, *dma_handle, ret);
+
+ return ret;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+
+ dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+
+ debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+#endif
diff --git a/arch/hexagon/include/asm/dma.h b/arch/hexagon/include/asm/dma.h
new file mode 100644
index 0000000..da6d2f6
--- /dev/null
+++ b/arch/hexagon/include/asm/dma.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h>
+
+#define MAX_DMA_CHANNELS 1
+#define MAX_DMA_ADDRESS (PAGE_OFFSET)
+
+extern size_t hexagon_coherent_pool_size;
+
+#endif
diff --git a/arch/hexagon/include/asm/elf.h b/arch/hexagon/include/asm/elf.h
new file mode 100644
index 0000000..37976a0
--- /dev/null
+++ b/arch/hexagon/include/asm/elf.h
@@ -0,0 +1,229 @@
+/*
+ * ELF definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ASM_ELF_H
+#define __ASM_ELF_H
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * This should really be in linux/elf-em.h.
+ */
+#define EM_HEXAGON 164 /* QUALCOMM Hexagon */
+
+struct elf32_hdr;
+
+/*
+ * ELF header e_flags defines.
+ */
+
+/* should have stuff like "CPU type" and maybe "ABI version", etc */
+
+/* Hexagon relocations */
+ /* V2 */
+#define R_HEXAGON_NONE 0
+#define R_HEXAGON_B22_PCREL 1
+#define R_HEXAGON_B15_PCREL 2
+#define R_HEXAGON_B7_PCREL 3
+#define R_HEXAGON_LO16 4
+#define R_HEXAGON_HI16 5
+#define R_HEXAGON_32 6
+#define R_HEXAGON_16 7
+#define R_HEXAGON_8 8
+#define R_HEXAGON_GPREL16_0 9
+#define R_HEXAGON_GPREL16_1 10
+#define R_HEXAGON_GPREL16_2 11
+#define R_HEXAGON_GPREL16_3 12
+#define R_HEXAGON_HL16 13
+ /* V3 */
+#define R_HEXAGON_B13_PCREL 14
+ /* V4 */
+#define R_HEXAGON_B9_PCREL 15
+ /* V4 (extenders) */
+#define R_HEXAGON_B32_PCREL_X 16
+#define R_HEXAGON_32_6_X 17
+ /* V4 (extended) */
+#define R_HEXAGON_B22_PCREL_X 18
+#define R_HEXAGON_B15_PCREL_X 19
+#define R_HEXAGON_B13_PCREL_X 20
+#define R_HEXAGON_B9_PCREL_X 21
+#define R_HEXAGON_B7_PCREL_X 22
+#define R_HEXAGON_16_X 23
+#define R_HEXAGON_12_X 24
+#define R_HEXAGON_11_X 25
+#define R_HEXAGON_10_X 26
+#define R_HEXAGON_9_X 27
+#define R_HEXAGON_8_X 28
+#define R_HEXAGON_7_X 29
+#define R_HEXAGON_6_X 30
+ /* V2 PIC */
+#define R_HEXAGON_32_PCREL 31
+#define R_HEXAGON_COPY 32
+#define R_HEXAGON_GLOB_DAT 33
+#define R_HEXAGON_JMP_SLOT 34
+#define R_HEXAGON_RELATIVE 35
+#define R_HEXAGON_PLT_B22_PCREL 36
+#define R_HEXAGON_GOTOFF_LO16 37
+#define R_HEXAGON_GOTOFF_HI16 38
+#define R_HEXAGON_GOTOFF_32 39
+#define R_HEXAGON_GOT_LO16 40
+#define R_HEXAGON_GOT_HI16 41
+#define R_HEXAGON_GOT_32 42
+#define R_HEXAGON_GOT_16 43
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+typedef struct user_regs_struct elf_gregset_t;
+#define ELF_NGREG (sizeof(elf_gregset_t)/sizeof(unsigned long))
+
+/* Placeholder */
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * Bypass the whole "regsets" thing for now and use the define.
+ */
+
+#define ELF_CORE_COPY_REGS(DEST, REGS) \
+do { \
+ DEST.r0 = REGS->r00; \
+ DEST.r1 = REGS->r01; \
+ DEST.r2 = REGS->r02; \
+ DEST.r3 = REGS->r03; \
+ DEST.r4 = REGS->r04; \
+ DEST.r5 = REGS->r05; \
+ DEST.r6 = REGS->r06; \
+ DEST.r7 = REGS->r07; \
+ DEST.r8 = REGS->r08; \
+ DEST.r9 = REGS->r09; \
+ DEST.r10 = REGS->r10; \
+ DEST.r11 = REGS->r11; \
+ DEST.r12 = REGS->r12; \
+ DEST.r13 = REGS->r13; \
+ DEST.r14 = REGS->r14; \
+ DEST.r15 = REGS->r15; \
+ DEST.r16 = REGS->r16; \
+ DEST.r17 = REGS->r17; \
+ DEST.r18 = REGS->r18; \
+ DEST.r19 = REGS->r19; \
+ DEST.r20 = REGS->r20; \
+ DEST.r21 = REGS->r21; \
+ DEST.r22 = REGS->r22; \
+ DEST.r23 = REGS->r23; \
+ DEST.r24 = REGS->r24; \
+ DEST.r25 = REGS->r25; \
+ DEST.r26 = REGS->r26; \
+ DEST.r27 = REGS->r27; \
+ DEST.r28 = REGS->r28; \
+ DEST.r29 = pt_psp(REGS); \
+ DEST.r30 = REGS->r30; \
+ DEST.r31 = REGS->r31; \
+ DEST.sa0 = REGS->sa0; \
+ DEST.lc0 = REGS->lc0; \
+ DEST.sa1 = REGS->sa1; \
+ DEST.lc1 = REGS->lc1; \
+ DEST.m0 = REGS->m0; \
+ DEST.m1 = REGS->m1; \
+ DEST.usr = REGS->usr; \
+ DEST.p3_0 = REGS->preds; \
+ DEST.gp = REGS->gp; \
+ DEST.ugp = REGS->ugp; \
+ DEST.pc = pt_elr(REGS); \
+ DEST.cause = pt_cause(REGS); \
+ DEST.badva = pt_badva(REGS); \
+} while (0);
+
+
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ * Checks the machine and ABI type.
+ */
+#define elf_check_arch(hdr) ((hdr)->e_machine == EM_HEXAGON)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_HEXAGON
+
+#ifdef CONFIG_HEXAGON_ARCH_V2
+#define ELF_CORE_EFLAGS 0x1
+#endif
+
+#ifdef CONFIG_HEXAGON_ARCH_V3
+#define ELF_CORE_EFLAGS 0x2
+#endif
+
+#ifdef CONFIG_HEXAGON_ARCH_V4
+#define ELF_CORE_EFLAGS 0x3
+#endif
+
+/*
+ * Some architectures have ld.so set up a pointer to a function
+ * to be registered using atexit, to facilitate cleanup. So that
+ * static executables will be well-behaved, we would null the register
+ * in question here, in the pt_regs structure passed. For now,
+ * leave it a null macro.
+ */
+#define ELF_PLAT_INIT(regs, load_addr) do { } while (0)
+
+#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
+
+/* Hrm is this going to cause problems for changing PAGE_SIZE? */
+#define ELF_EXEC_PAGESIZE 4096
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader. We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE 0x08000000UL
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP (0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
+#define ELF_PLATFORM (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#endif
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int uses_interp);
+
+
+#endif
diff --git a/arch/hexagon/include/asm/fixmap.h b/arch/hexagon/include/asm/fixmap.h
new file mode 100644
index 0000000..b27f494
--- /dev/null
+++ b/arch/hexagon/include/asm/fixmap.h
@@ -0,0 +1,73 @@
+/*
+ * Fixmap support for Hexagon - enough to support highmem features
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+/*
+ * A lot of the fixmap info is already in mem-layout.h
+ */
+#include <asm/mem-layout.h>
+
+/*
+ * Full fixmap support involves set_fixmap() functions, but
+ * these may not be needed if all we're after is an area for
+ * highmem kernel mappings.
+ */
+#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/**
+ * fix_to_virt -- "index to address" translation.
+ *
+ * If anyone tries to use the idx directly without translation,
+ * we catch the bug with a NULL-deference kernel oops. Illegal
+ * ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ /*
+ * This branch gets completely eliminated after inlining,
+ * except when someone tries to use fixaddr indices in an
+ * illegal way. (such as mixing up address types or using
+ * out-of-range indices).
+ *
+ * If it doesn't get removed, the linker will complain
+ * loudly with a reasonably clear error message..
+ */
+ if (idx >= __end_of_fixed_addresses)
+ __this_fixmap_does_not_exist();
+
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#define kmap_get_fixmap_pte(vaddr) \
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), \
+ (vaddr)), (vaddr)), (vaddr))
+
+#endif
diff --git a/arch/hexagon/include/asm/fpu.h b/arch/hexagon/include/asm/fpu.h
new file mode 100644
index 0000000..0e135ea
--- /dev/null
+++ b/arch/hexagon/include/asm/fpu.h
@@ -0,0 +1,4 @@
+/*
+ * If the FPU is used inside the kernel,
+ * kernel_fpu_end() will be defined here.
+ */
diff --git a/arch/hexagon/include/asm/futex.h b/arch/hexagon/include/asm/futex.h
new file mode 100644
index 0000000..7e597f8
--- /dev/null
+++ b/arch/hexagon/include/asm/futex.h
@@ -0,0 +1,137 @@
+#ifndef _ASM_HEXAGON_FUTEX_H
+#define _ASM_HEXAGON_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+/* XXX TODO-- need to add sync barriers! */
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile( \
+ "1: %0 = memw_locked(%3);\n" \
+ /* For example: %1 = %4 */ \
+ insn \
+ "2: memw_locked(%3,p2) = %1;\n" \
+ " if !p2 jump 1b;\n" \
+ " %1 = #0;\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: %1 = #%5;\n" \
+ " jump 3b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ ".long 1b,4b,2b,4b\n" \
+ ".previous\n" \
+ : "=&r" (oldval), "=&r" (ret), "+m" (*uaddr) \
+ : "r" (uaddr), "r" (oparg), "i" (-EFAULT) \
+ : "p2", "memory")
+
+
+static inline int
+futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("%1 = %4\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("%1 = add(%0,%4)\n", ret, oldval, uaddr,
+ oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("%1 = or(%0,%4)\n", ret, oldval, uaddr,
+ oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("%1 = not(%4); %1 = and(%0,%1)\n", ret,
+ oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("%1 = xor(%0,%4)\n", ret, oldval, uaddr,
+ oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ:
+ ret = (oldval == cmparg);
+ break;
+ case FUTEX_OP_CMP_NE:
+ ret = (oldval != cmparg);
+ break;
+ case FUTEX_OP_CMP_LT:
+ ret = (oldval < cmparg);
+ break;
+ case FUTEX_OP_CMP_GE:
+ ret = (oldval >= cmparg);
+ break;
+ case FUTEX_OP_CMP_LE:
+ ret = (oldval <= cmparg);
+ break;
+ case FUTEX_OP_CMP_GT:
+ ret = (oldval > cmparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
+ u32 newval)
+{
+ int prev;
+ int ret;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+ return -EFAULT;
+
+ __asm__ __volatile__ (
+ "1: %1 = memw_locked(%3)\n"
+ " {\n"
+ " p2 = cmp.eq(%1,%4)\n"
+ " if !p2.new jump:NT 3f\n"
+ " }\n"
+ "2: memw_locked(%3,p2) = %5\n"
+ " if !p2 jump 1b\n"
+ "3:\n"
+ ".section .fixup,\"ax\"\n"
+ "4: %0 = #%6\n"
+ " jump 3b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ ".long 1b,4b,2b,4b\n"
+ ".previous\n"
+ : "+r" (ret), "=&r" (prev), "+m" (*uaddr)
+ : "r" (uaddr), "r" (oldval), "r" (newval), "i"(-EFAULT)
+ : "p2", "memory");
+
+ *uval = prev;
+ return ret;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_HEXAGON_FUTEX_H */
diff --git a/arch/hexagon/include/asm/hexagon_vm.h b/arch/hexagon/include/asm/hexagon_vm.h
new file mode 100644
index 0000000..182cb9d
--- /dev/null
+++ b/arch/hexagon/include/asm/hexagon_vm.h
@@ -0,0 +1,281 @@
+/*
+ * Declarations for to Hexagon Virtal Machine.
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef ASM_HEXAGON_VM_H
+#define ASM_HEXAGON_VM_H
+
+/*
+ * In principle, a Linux kernel for the VM could
+ * selectively define the virtual instructions
+ * as inline assembler macros, but for a first pass,
+ * we'll use subroutines for both the VM and the native
+ * kernels. It's costing a subroutine call/return,
+ * but it makes for a single set of entry points
+ * for tracing/debugging.
+ */
+
+/*
+ * Lets make this stuff visible only if configured,
+ * so we can unconditionally include the file.
+ */
+
+#ifndef __ASSEMBLY__
+
+enum VM_CACHE_OPS {
+ ickill,
+ dckill,
+ l2kill,
+ dccleaninva,
+ icinva,
+ idsync,
+ fetch_cfg
+};
+
+enum VM_INT_OPS {
+ nop,
+ globen,
+ globdis,
+ locen,
+ locdis,
+ affinity,
+ get,
+ peek,
+ status,
+ post,
+ clear
+};
+
+extern void _K_VM_event_vector(void);
+
+void __vmrte(void);
+long __vmsetvec(void *);
+long __vmsetie(long);
+long __vmgetie(void);
+long __vmintop(enum VM_INT_OPS, long, long, long, long);
+long __vmclrmap(void *, unsigned long);
+long __vmnewmap(void *);
+long __vmcache(enum VM_CACHE_OPS op, unsigned long addr, unsigned long len);
+unsigned long long __vmgettime(void);
+long __vmsettime(unsigned long long);
+long __vmstart(void *, void *);
+void __vmstop(void);
+long __vmwait(void);
+void __vmyield(void);
+long __vmvpid(void);
+
+static inline long __vmcache_ickill(void)
+{
+ return __vmcache(ickill, 0, 0);
+}
+
+static inline long __vmcache_dckill(void)
+{
+ return __vmcache(dckill, 0, 0);
+}
+
+static inline long __vmcache_l2kill(void)
+{
+ return __vmcache(l2kill, 0, 0);
+}
+
+static inline long __vmcache_dccleaninva(unsigned long addr, unsigned long len)
+{
+ return __vmcache(dccleaninva, addr, len);
+}
+
+static inline long __vmcache_icinva(unsigned long addr, unsigned long len)
+{
+ return __vmcache(icinva, addr, len);
+}
+
+static inline long __vmcache_idsync(unsigned long addr,
+ unsigned long len)
+{
+ return __vmcache(idsync, addr, len);
+}
+
+static inline long __vmcache_fetch_cfg(unsigned long val)
+{
+ return __vmcache(fetch_cfg, val, 0);
+}
+
+/* interrupt operations */
+
+static inline long __vmintop_nop(void)
+{
+ return __vmintop(nop, 0, 0, 0, 0);
+}
+
+static inline long __vmintop_globen(long i)
+{
+ return __vmintop(globen, i, 0, 0, 0);
+}
+
+static inline long __vmintop_globdis(long i)
+{
+ return __vmintop(globdis, i, 0, 0, 0);
+}
+
+static inline long __vmintop_locen(long i)
+{
+ return __vmintop(locen, i, 0, 0, 0);
+}
+
+static inline long __vmintop_locdis(long i)
+{
+ return __vmintop(locdis, i, 0, 0, 0);
+}
+
+static inline long __vmintop_affinity(long i, long cpu)
+{
+ return __vmintop(locdis, i, cpu, 0, 0);
+}
+
+static inline long __vmintop_get(void)
+{
+ return __vmintop(get, 0, 0, 0, 0);
+}
+
+static inline long __vmintop_peek(void)
+{
+ return __vmintop(peek, 0, 0, 0, 0);
+}
+
+static inline long __vmintop_status(long i)
+{
+ return __vmintop(status, i, 0, 0, 0);
+}
+
+static inline long __vmintop_post(long i)
+{
+ return __vmintop(post, i, 0, 0, 0);
+}
+
+static inline long __vmintop_clear(long i)
+{
+ return __vmintop(clear, i, 0, 0, 0);
+}
+
+#else /* Only assembly code should reference these */
+
+#define HVM_TRAP1_VMRTE 1
+#define HVM_TRAP1_VMSETVEC 2
+#define HVM_TRAP1_VMSETIE 3
+#define HVM_TRAP1_VMGETIE 4
+#define HVM_TRAP1_VMINTOP 5
+#define HVM_TRAP1_VMCLRMAP 10
+#define HVM_TRAP1_VMNEWMAP 11
+#define HVM_TRAP1_FORMERLY_VMWIRE 12
+#define HVM_TRAP1_VMCACHE 13
+#define HVM_TRAP1_VMGETTIME 14
+#define HVM_TRAP1_VMSETTIME 15
+#define HVM_TRAP1_VMWAIT 16
+#define HVM_TRAP1_VMYIELD 17
+#define HVM_TRAP1_VMSTART 18
+#define HVM_TRAP1_VMSTOP 19
+#define HVM_TRAP1_VMVPID 20
+#define HVM_TRAP1_VMSETREGS 21
+#define HVM_TRAP1_VMGETREGS 22
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Constants for virtual instruction parameters and return values
+ */
+
+/* vmsetie arguments */
+
+#define VM_INT_DISABLE 0
+#define VM_INT_ENABLE 1
+
+/* vmsetimask arguments */
+
+#define VM_INT_UNMASK 0
+#define VM_INT_MASK 1
+
+#define VM_NEWMAP_TYPE_LINEAR 0
+#define VM_NEWMAP_TYPE_PGTABLES 1
+
+
+/*
+ * Event Record definitions useful to both C and Assembler
+ */
+
+/* VMEST Layout */
+
+#define HVM_VMEST_UM_SFT 31
+#define HVM_VMEST_UM_MSK 1
+#define HVM_VMEST_IE_SFT 30
+#define HVM_VMEST_IE_MSK 1
+#define HVM_VMEST_EVENTNUM_SFT 16
+#define HVM_VMEST_EVENTNUM_MSK 0xff
+#define HVM_VMEST_CAUSE_SFT 0
+#define HVM_VMEST_CAUSE_MSK 0xffff
+
+/*
+ * The initial program gets to find a system environment descriptor
+ * on its stack when it begins exection. The first word is a version
+ * code to indicate what is there. Zero means nothing more.
+ */
+
+#define HEXAGON_VM_SED_NULL 0
+
+/*
+ * Event numbers for vector binding
+ */
+
+#define HVM_EV_RESET 0
+#define HVM_EV_MACHCHECK 1
+#define HVM_EV_GENEX 2
+#define HVM_EV_TRAP 8
+#define HVM_EV_INTR 15
+/* These shoud be nuked as soon as we know the VM is up to spec v0.1.1 */
+#define HVM_EV_INTR_0 16
+#define HVM_MAX_INTR 240
+
+/*
+ * Cause values for General Exception
+ */
+
+#define HVM_GE_C_BUS 0x01
+#define HVM_GE_C_XPROT 0x11
+#define HVM_GE_C_XUSER 0x14
+#define HVM_GE_C_INVI 0x15
+#define HVM_GE_C_PRIVI 0x1B
+#define HVM_GE_C_XMAL 0x1C
+#define HVM_GE_C_RMAL 0x20
+#define HVM_GE_C_WMAL 0x21
+#define HVM_GE_C_RPROT 0x22
+#define HVM_GE_C_WPROT 0x23
+#define HVM_GE_C_RUSER 0x24
+#define HVM_GE_C_WUSER 0x25
+#define HVM_GE_C_CACHE 0x28
+
+/*
+ * Cause codes for Machine Check
+ */
+
+#define HVM_MCHK_C_DOWN 0x00
+#define HVM_MCHK_C_BADSP 0x01
+#define HVM_MCHK_C_BADEX 0x02
+#define HVM_MCHK_C_BADPT 0x03
+#define HVM_MCHK_C_REGWR 0x29
+
+#endif
diff --git a/arch/hexagon/include/asm/intrinsics.h b/arch/hexagon/include/asm/intrinsics.h
new file mode 100644
index 0000000..1c02186
--- /dev/null
+++ b/arch/hexagon/include/asm/intrinsics.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_HEXAGON_INTRINSICS_H
+#define _ASM_HEXAGON_INTRINSICS_H
+
+#define HEXAGON_P_vrmpyhacc_PP __builtin_HEXAGON_M2_vrmac_s0
+#define HEXAGON_P_vrmpyh_PP __builtin_HEXAGON_M2_vrmpy_s0
+#define HEXAGON_R_cl0_R __builtin_HEXAGON_S2_cl0
+
+#endif
diff --git a/arch/hexagon/include/asm/io.h b/arch/hexagon/include/asm/io.h
new file mode 100644
index 0000000..b3acc2c
--- /dev/null
+++ b/arch/hexagon/include/asm/io.h
@@ -0,0 +1,326 @@
+/*
+ * IO definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <asm/string.h>
+#include <asm/mem-layout.h>
+#include <asm/iomap.h>
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+/*
+ * We don't have PCI yet.
+ * _IO_BASE is pointing at what should be unused virtual space.
+ */
+#define IO_SPACE_LIMIT 0xffff
+#define _IO_BASE ((void __iomem *)0xfe000000)
+
+extern int remap_area_pages(unsigned long start, unsigned long phys_addr,
+ unsigned long end, unsigned long flags);
+
+extern void __iounmap(const volatile void __iomem *addr);
+
+/* Defined in lib/io.c, needed for smc91x driver. */
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+
+extern void __raw_readsl(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int wordlen);
+
+#define readsw(p, d, l) __raw_readsw(p, d, l)
+#define writesw(p, d, l) __raw_writesw(p, d, l)
+
+#define readsl(p, d, l) __raw_readsl(p, d, l)
+#define writesl(p, d, l) __raw_writesl(p, d, l)
+
+/*
+ * virt_to_phys - map virtual address to physical
+ * @address: address to map
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+ return __pa(address);
+}
+
+/*
+ * phys_to_virt - map physical address to virtual
+ * @address: address to map
+ */
+static inline void *phys_to_virt(unsigned long address)
+{
+ return __va(address);
+}
+
+/*
+ * convert a physical pointer to a virtual kernel pointer for
+ * /dev/mem access.
+ */
+#define xlate_dev_kmem_ptr(p) __va(p)
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * IO port access primitives. Hexagon doesn't have special IO access
+ * instructions; all I/O is memory mapped.
+ *
+ * in/out are used for "ports", but we don't have "port instructions",
+ * so these are really just memory mapped too.
+ */
+
+/*
+ * readb - read byte from memory mapped device
+ * @addr: pointer to memory
+ *
+ * Operates on "I/O bus memory space"
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+ u8 val;
+ asm volatile(
+ "%0 = memb(%1);"
+ : "=&r" (val)
+ : "r" (addr)
+ );
+ return val;
+}
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+ u16 val;
+ asm volatile(
+ "%0 = memh(%1);"
+ : "=&r" (val)
+ : "r" (addr)
+ );
+ return val;
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+ u32 val;
+ asm volatile(
+ "%0 = memw(%1);"
+ : "=&r" (val)
+ : "r" (addr)
+ );
+ return val;
+}
+
+/*
+ * writeb - write a byte to a memory location
+ * @data: data to write to
+ * @addr: pointer to memory
+ *
+ */
+static inline void writeb(u8 data, volatile void __iomem *addr)
+{
+ asm volatile(
+ "memb(%0) = %1;"
+ :
+ : "r" (addr), "r" (data)
+ : "memory"
+ );
+}
+
+static inline void writew(u16 data, volatile void __iomem *addr)
+{
+ asm volatile(
+ "memh(%0) = %1;"
+ :
+ : "r" (addr), "r" (data)
+ : "memory"
+ );
+
+}
+
+static inline void writel(u32 data, volatile void __iomem *addr)
+{
+ asm volatile(
+ "memw(%0) = %1;"
+ :
+ : "r" (addr), "r" (data)
+ : "memory"
+ );
+}
+
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+/*
+ * Need an mtype somewhere in here, for cache type deals?
+ * This is probably too long for an inline.
+ */
+void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size);
+
+static inline void __iomem *ioremap(unsigned long phys_addr, unsigned long size)
+{
+ return ioremap_nocache(phys_addr, size);
+}
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+ __iounmap(addr);
+}
+
+#define __raw_writel writel
+
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
+ int count)
+{
+ memcpy(dst, (void *) src, count);
+}
+
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
+ int count)
+{
+ memcpy((void *) dst, src, count);
+}
+
+#define PCI_IO_ADDR (volatile void __iomem *)
+
+/*
+ * inb - read byte from I/O port or something
+ * @port: address in I/O space
+ *
+ * Operates on "I/O bus I/O space"
+ */
+static inline u8 inb(unsigned long port)
+{
+ return readb(_IO_BASE + (port & IO_SPACE_LIMIT));
+}
+
+static inline u16 inw(unsigned long port)
+{
+ return readw(_IO_BASE + (port & IO_SPACE_LIMIT));
+}
+
+static inline u32 inl(unsigned long port)
+{
+ return readl(_IO_BASE + (port & IO_SPACE_LIMIT));
+}
+
+/*
+ * outb - write a byte to a memory location
+ * @data: data to write to
+ * @addr: address in I/O space
+ */
+static inline void outb(u8 data, unsigned long port)
+{
+ writeb(data, _IO_BASE + (port & IO_SPACE_LIMIT));
+}
+
+static inline void outw(u16 data, unsigned long port)
+{
+ writew(data, _IO_BASE + (port & IO_SPACE_LIMIT));
+}
+
+static inline void outl(u32 data, unsigned long port)
+{
+ writel(data, _IO_BASE + (port & IO_SPACE_LIMIT));
+}
+
+#define outb_p outb
+#define outw_p outw
+#define outl_p outl
+
+#define inb_p inb
+#define inw_p inw
+#define inl_p inl
+
+static inline void insb(unsigned long port, void *buffer, int count)
+{
+ if (count) {
+ u8 *buf = buffer;
+ do {
+ u8 x = inb(port);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insw(unsigned long port, void *buffer, int count)
+{
+ if (count) {
+ u16 *buf = buffer;
+ do {
+ u16 x = inw(port);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insl(unsigned long port, void *buffer, int count)
+{
+ if (count) {
+ u32 *buf = buffer;
+ do {
+ u32 x = inw(port);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void outsb(unsigned long port, const void *buffer, int count)
+{
+ if (count) {
+ const u8 *buf = buffer;
+ do {
+ outb(*buf++, port);
+ } while (--count);
+ }
+}
+
+static inline void outsw(unsigned long port, const void *buffer, int count)
+{
+ if (count) {
+ const u16 *buf = buffer;
+ do {
+ outw(*buf++, port);
+ } while (--count);
+ }
+}
+
+static inline void outsl(unsigned long port, const void *buffer, int count)
+{
+ if (count) {
+ const u32 *buf = buffer;
+ do {
+ outl(*buf++, port);
+ } while (--count);
+ }
+}
+
+#define flush_write_buffers() do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/hexagon/include/asm/irq.h b/arch/hexagon/include/asm/irq.h
new file mode 100644
index 0000000..ded8c15
--- /dev/null
+++ b/arch/hexagon/include/asm/irq.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_IRQ_H_
+#define _ASM_IRQ_H_
+
+/* Number of first-level interrupts associated with the CPU core. */
+#define HEXAGON_CPUINTS 32
+
+/*
+ * Must define NR_IRQS before including <asm-generic/irq.h>
+ * 64 == the two SIRC's, 176 == the two gpio's
+ *
+ * IRQ configuration is still in flux; defining this to a comfortably
+ * large number.
+ */
+#define NR_IRQS 512
+
+#include <asm-generic/irq.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/irqflags.h b/arch/hexagon/include/asm/irqflags.h
new file mode 100644
index 0000000..ec15236
--- /dev/null
+++ b/arch/hexagon/include/asm/irqflags.h
@@ -0,0 +1,62 @@
+/*
+ * IRQ support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#include <asm/hexagon_vm.h>
+#include <linux/types.h>
+
+static inline unsigned long arch_local_save_flags(void)
+{
+ return __vmgetie();
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+ return __vmsetie(VM_INT_DISABLE);
+}
+
+static inline bool arch_irqs_disabled_flags(unsigned long flags)
+{
+ return !flags;
+}
+
+static inline bool arch_irqs_disabled(void)
+{
+ return !__vmgetie();
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ __vmsetie(VM_INT_ENABLE);
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ __vmsetie(VM_INT_DISABLE);
+}
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+ __vmsetie(flags);
+}
+
+#endif
diff --git a/arch/hexagon/include/asm/kgdb.h b/arch/hexagon/include/asm/kgdb.h
new file mode 100644
index 0000000..9e87797
--- /dev/null
+++ b/arch/hexagon/include/asm/kgdb.h
@@ -0,0 +1,43 @@
+/*
+ * arch/hexagon/include/asm/kgdb.h - Hexagon KGDB Support
+ *
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __HEXAGON_KGDB_H__
+#define __HEXAGON_KGDB_H__
+
+#define BREAK_INSTR_SIZE 4
+#define CACHE_FLUSH_IS_SAFE 1
+#define BUFMAX ((NUMREGBYTES * 2) + 512)
+
+static inline void arch_kgdb_breakpoint(void)
+{
+ asm("trap0(#0xDB)");
+}
+
+/* Registers:
+ * 32 gpr + sa0/1 + lc0/1 + m0/1 + gp + ugp + pred + pc = 42 total.
+ * vm regs = psp+elr+est+badva = 4
+ * syscall+restart = 2 more
+ * so 48 = 42 +4 + 2
+ */
+#define DBG_USER_REGS 42
+#define DBG_MAX_REG_NUM (DBG_USER_REGS + 6)
+#define NUMREGBYTES (DBG_MAX_REG_NUM*4)
+
+#endif /* __HEXAGON_KGDB_H__ */
diff --git a/arch/hexagon/include/asm/linkage.h b/arch/hexagon/include/asm/linkage.h
new file mode 100644
index 0000000..a00b85f
--- /dev/null
+++ b/arch/hexagon/include/asm/linkage.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
diff --git a/arch/hexagon/include/asm/mem-layout.h b/arch/hexagon/include/asm/mem-layout.h
new file mode 100644
index 0000000..72e5dcd
--- /dev/null
+++ b/arch/hexagon/include/asm/mem-layout.h
@@ -0,0 +1,112 @@
+/*
+ * Memory layout definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_HEXAGON_MEM_LAYOUT_H
+#define _ASM_HEXAGON_MEM_LAYOUT_H
+
+#include <linux/const.h>
+
+/*
+ * Have to do this for ginormous numbers, else they get printed as
+ * negative numbers, which the linker no likey when you try to
+ * assign it to the location counter.
+ */
+
+#define PAGE_OFFSET _AC(0xc0000000, UL)
+
+/*
+ * LOAD_ADDRESS is the physical/linear address of where in memory
+ * the kernel gets loaded. The 12 least significant bits must be zero (0)
+ * due to limitations on setting the EVB
+ *
+ */
+
+#ifndef LOAD_ADDRESS
+#define LOAD_ADDRESS 0x00000000
+#endif
+
+#define TASK_SIZE (PAGE_OFFSET)
+
+/* not sure how these are used yet */
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX TASK_SIZE
+
+#ifndef __ASSEMBLY__
+enum fixed_addresses {
+ FIX_KMAP_BEGIN,
+ FIX_KMAP_END, /* check for per-cpuism */
+ __end_of_fixed_addresses
+};
+
+#define MIN_KERNEL_SEG 0x300 /* From 0xc0000000 */
+extern int max_kernel_seg;
+
+/*
+ * Start of vmalloc virtual address space for kernel;
+ * supposed to be based on the amount of physical memory available
+ */
+
+#define VMALLOC_START (PAGE_OFFSET + VMALLOC_OFFSET + \
+ (unsigned long)high_memory)
+
+/* Gap between physical ram and vmalloc space for guard purposes. */
+#define VMALLOC_OFFSET PAGE_SIZE
+
+/*
+ * Create the space between VMALLOC_START and FIXADDR_TOP backwards
+ * from the ... "top".
+ *
+ * Permanent IO mappings will live at 0xfexx_xxxx
+ * Hypervisor occupies the last 16MB page at 0xffxxxxxx
+ */
+
+#define FIXADDR_TOP 0xfe000000
+#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+/*
+ * "permanent kernel mappings", defined as long-lasting mappings of
+ * high-memory page frames into the kernel address space.
+ */
+
+#define LAST_PKMAP PTRS_PER_PTE
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+/*
+ * To the "left" of the fixed map space is the kmap space
+ *
+ * "Permanent Kernel Mappings"; fancy (or less fancy) PTE table
+ * that looks like it's actually walked.
+ * Need to check the alignment/shift usage; some archs use
+ * PMD_MASK on this value
+ */
+#define PKMAP_BASE (FIXADDR_START-PAGE_SIZE*LAST_PKMAP)
+
+/*
+ * 2 pages of guard gap between where vmalloc area ends
+ * and pkmap_base begins.
+ */
+#define VMALLOC_END (PKMAP_BASE-PAGE_SIZE*2)
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* _ASM_HEXAGON_MEM_LAYOUT_H */
diff --git a/arch/hexagon/include/asm/mmu.h b/arch/hexagon/include/asm/mmu.h
new file mode 100644
index 0000000..30a5d8d
--- /dev/null
+++ b/arch/hexagon/include/asm/mmu.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+#include <asm/vdso.h>
+
+/*
+ * Architecture-specific state for a mm_struct.
+ * For the Hexagon Virtual Machine, it can be a copy
+ * of the pointer to the page table base.
+ */
+struct mm_context {
+ unsigned long long generation;
+ unsigned long ptbase;
+ struct hexagon_vdso *vdso;
+};
+
+typedef struct mm_context mm_context_t;
+
+#endif
diff --git a/arch/hexagon/include/asm/mmu_context.h b/arch/hexagon/include/asm/mmu_context.h
new file mode 100644
index 0000000..b4fe5a5
--- /dev/null
+++ b/arch/hexagon/include/asm/mmu_context.h
@@ -0,0 +1,100 @@
+/*
+ * MM context support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/mem-layout.h>
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+/*
+ * VM port hides all TLB management, so "lazy TLB" isn't very
+ * meaningful. Even for ports to architectures with visble TLBs,
+ * this is almost invariably a null function.
+ */
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+ struct task_struct *tsk)
+{
+}
+
+/*
+ * Architecture-specific actions, if any, for memory map deactivation.
+ */
+static inline void deactivate_mm(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+}
+
+/**
+ * init_new_context - initialize context related info for new mm_struct instance
+ * @tsk: pointer to a task struct
+ * @mm: pointer to a new mm struct
+ */
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+ /* mm->context is set up by pgd_alloc */
+ return 0;
+}
+
+/*
+ * Switch active mm context
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ int l1;
+
+ /*
+ * For virtual machine, we have to update system map if it's been
+ * touched.
+ */
+ if (next->context.generation < prev->context.generation) {
+ for (l1 = MIN_KERNEL_SEG; l1 <= max_kernel_seg; l1++)
+ next->pgd[l1] = init_mm.pgd[l1];
+
+ next->context.generation = prev->context.generation;
+ }
+
+ __vmnewmap((void *)next->context.ptbase);
+}
+
+/*
+ * Activate new memory map for task
+ */
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ switch_mm(prev, next, current_thread_info()->task);
+ local_irq_restore(flags);
+}
+
+/* Generic hooks for arch_dup_mmap and arch_exit_mmap */
+#include <asm-generic/mm_hooks.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/module.h b/arch/hexagon/include/asm/module.h
new file mode 100644
index 0000000..72ba494
--- /dev/null
+++ b/arch/hexagon/include/asm/module.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+#include <asm-generic/module.h>
+
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif
diff --git a/arch/hexagon/include/asm/mutex.h b/arch/hexagon/include/asm/mutex.h
new file mode 100644
index 0000000..58b52de
--- /dev/null
+++ b/arch/hexagon/include/asm/mutex.h
@@ -0,0 +1,8 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-xchg.h>
diff --git a/arch/hexagon/include/asm/page.h b/arch/hexagon/include/asm/page.h
new file mode 100644
index 0000000..edd9762
--- /dev/null
+++ b/arch/hexagon/include/asm/page.h
@@ -0,0 +1,157 @@
+/*
+ * Page management definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <linux/const.h>
+
+/* This is probably not the most graceful way to handle this. */
+
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PAGE_SHIFT 12
+#define HEXAGON_L1_PTE_SIZE __HVM_PDE_S_4KB
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PAGE_SHIFT 14
+#define HEXAGON_L1_PTE_SIZE __HVM_PDE_S_16KB
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PAGE_SHIFT 16
+#define HEXAGON_L1_PTE_SIZE __HVM_PDE_S_64KB
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_256KB
+#define PAGE_SHIFT 18
+#define HEXAGON_L1_PTE_SIZE __HVM_PDE_S_256KB
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_1MB
+#define PAGE_SHIFT 20
+#define HEXAGON_L1_PTE_SIZE __HVM_PDE_S_1MB
+#endif
+
+/*
+ * These should be defined in hugetlb.h, but apparently not.
+ * "Huge" for us should be 4MB or 16MB, which are both represented
+ * in L1 PTE's. Right now, it's set up for 4MB.
+ */
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SHIFT 22
+#define HPAGE_SIZE (1UL << HPAGE_SHIFT)
+#define HPAGE_MASK (~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT)
+#define HVM_HUGEPAGE_SIZE 0x5
+#endif
+
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/*
+ * This is for PFN_DOWN, which mm.h needs. Seems the right place to pull it in.
+ */
+#include <linux/pfn.h>
+
+/*
+ * We implement a two-level architecture-specific page table structure.
+ * Null intermediate page table level (pmd, pud) definitions will come from
+ * asm-generic/pagetable-nopmd.h and asm-generic/pagetable-nopud.h
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+#define __pte(x) ((pte_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+/*
+ * We need a __pa and a __va routine for kernel space.
+ * MIPS says they're only used during mem_init.
+ * also, check if we need a PHYS_OFFSET.
+ */
+#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
+
+/* The "page frame" descriptor is defined in linux/mm.h */
+struct page;
+
+/* Returns page frame descriptor for virtual address. */
+#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(__pa(kaddr)))
+
+/* Default vm area behavior is non-executable. */
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+/* Need to not use a define for linesize; may move this to another file. */
+static inline void clear_page(void *page)
+{
+ /* This can only be done on pages with L1 WB cache */
+ asm volatile(
+ " loop0(1f,%1);\n"
+ "1: { dczeroa(%0);\n"
+ " %0 = add(%0,#32); }:endloop0\n"
+ : "+r" (page)
+ : "r" (PAGE_SIZE/32)
+ : "lc0", "sa0", "memory"
+ );
+}
+
+#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
+
+/*
+ * Under assumption that kernel always "sees" user map...
+ */
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+/*
+ * page_to_phys - convert page to physical address
+ * @page - pointer to page entry in mem_map
+ */
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * For port to Hexagon Virtual Machine, MAYBE we check for attempts
+ * to reference reserved HVM space, but in any case, the VM will be
+ * protected.
+ */
+#define kern_addr_valid(addr) (1)
+
+#include <asm-generic/memory_model.h>
+/* XXX Todo: implement assembly-optimized version of getorder. */
+#include <asm-generic/getorder.h>
+
+#endif /* ifdef __ASSEMBLY__ */
+#endif /* ifdef __KERNEL__ */
+
+#endif
diff --git a/arch/hexagon/include/asm/param.h b/arch/hexagon/include/asm/param.h
new file mode 100644
index 0000000..285344b
--- /dev/null
+++ b/arch/hexagon/include/asm/param.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#define EXEC_PAGESIZE 16384
+
+#include <asm-generic/param.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/perf_event.h b/arch/hexagon/include/asm/perf_event.h
new file mode 100644
index 0000000..6c2910f
--- /dev/null
+++ b/arch/hexagon/include/asm/perf_event.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PERF_EVENT_H
+#define _ASM_PERF_EVENT_H
+
+#define PERF_EVENT_INDEX_OFFSET 0
+
+#endif /* _ASM_PERF_EVENT_H */
diff --git a/arch/hexagon/include/asm/pgalloc.h b/arch/hexagon/include/asm/pgalloc.h
new file mode 100644
index 0000000..13443c7
--- /dev/null
+++ b/arch/hexagon/include/asm/pgalloc.h
@@ -0,0 +1,146 @@
+/*
+ * Page table support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/mem-layout.h>
+#include <asm/atomic.h>
+
+#define check_pgt_cache() do {} while (0)
+
+extern unsigned long long kmap_generation;
+
+/*
+ * Page table creation interface
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *pgd;
+
+ pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+
+ /*
+ * There may be better ways to do this, but to ensure
+ * that new address spaces always contain the kernel
+ * base mapping, and to ensure that the user area is
+ * initially marked invalid, initialize the new map
+ * map with a copy of the kernel's persistent map.
+ */
+
+ memcpy(pgd, swapper_pg_dir, PTRS_PER_PGD*sizeof(pgd_t *));
+ mm->context.generation = kmap_generation;
+
+ /* Physical version is what is passed to virtual machine on switch */
+ mm->context.ptbase = __pa(pgd);
+
+ return pgd;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ free_page((unsigned long) pgd);
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ struct page *pte;
+
+ pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+
+ if (pte)
+ pgtable_page_ctor(pte);
+
+ return pte;
+}
+
+/* _kernel variant gets to use a different allocator */
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
+ return (pte_t *) __get_free_page(flags);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+ pgtable_page_dtor(pte);
+ __free_page(pte);
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long)pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ pgtable_t pte)
+{
+ /*
+ * Conveniently, zero in 3 LSB means indirect 4K page table.
+ * Not so convenient when you're trying to vary the page size.
+ */
+ set_pmd(pmd, __pmd(((unsigned long)page_to_pfn(pte) << PAGE_SHIFT) |
+ HEXAGON_L1_PTE_SIZE));
+}
+
+/*
+ * Other architectures seem to have ways of making all processes
+ * share the same pmd's for their kernel mappings, but the v0.3
+ * Hexagon VM spec has a "monolithic" L1 table for user and kernel
+ * segments. We track "generations" of the kernel map to minimize
+ * overhead, and update the "slave" copies of the kernel mappings
+ * as part of switch_mm. However, we still need to update the
+ * kernel map of the active thread who's calling pmd_populate_kernel...
+ */
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+ pte_t *pte)
+{
+ extern spinlock_t kmap_gen_lock;
+ pmd_t *ppmd;
+ int pmdindex;
+
+ spin_lock(&kmap_gen_lock);
+ kmap_generation++;
+ mm->context.generation = kmap_generation;
+ current->active_mm->context.generation = kmap_generation;
+ spin_unlock(&kmap_gen_lock);
+
+ set_pmd(pmd, __pmd(((unsigned long)__pa(pte)) | HEXAGON_L1_PTE_SIZE));
+
+ /*
+ * Now the "slave" copy of the current thread.
+ * This is pointer arithmetic, not byte addresses!
+ */
+ pmdindex = (pgd_t *)pmd - mm->pgd;
+ ppmd = (pmd_t *)current->active_mm->pgd + pmdindex;
+ set_pmd(ppmd, __pmd(((unsigned long)__pa(pte)) | HEXAGON_L1_PTE_SIZE));
+ if (pmdindex > max_kernel_seg)
+ max_kernel_seg = pmdindex;
+}
+
+#define __pte_free_tlb(tlb, pte, addr) \
+do { \
+ pgtable_page_dtor((pte)); \
+ tlb_remove_page((tlb), (pte)); \
+} while (0)
+
+#endif
diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h
new file mode 100644
index 0000000..ca619bf2
--- /dev/null
+++ b/arch/hexagon/include/asm/pgtable.h
@@ -0,0 +1,518 @@
+/*
+ * Page table support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+/*
+ * Page table definitions for Qualcomm Hexagon processor.
+ */
+#include <linux/swap.h>
+#include <asm/page.h>
+#include <asm-generic/pgtable-nopmd.h>
+
+/* A handy thing to have if one has the RAM. Declared in head.S */
+extern unsigned long empty_zero_page;
+extern unsigned long zero_page_mask;
+
+/*
+ * The PTE model described here is that of the Hexagon Virtual Machine,
+ * which autonomously walks 2-level page tables. At a lower level, we
+ * also describe the RISCish software-loaded TLB entry structure of
+ * the underlying Hexagon processor. A kernel built to run on the
+ * virtual machine has no need to know about the underlying hardware.
+ */
+#include <asm/vm_mmu.h>
+
+/*
+ * To maximize the comfort level for the PTE manipulation macros,
+ * define the "well known" architecture-specific bits.
+ */
+#define _PAGE_READ __HVM_PTE_R
+#define _PAGE_WRITE __HVM_PTE_W
+#define _PAGE_EXECUTE __HVM_PTE_X
+#define _PAGE_USER __HVM_PTE_U
+
+/*
+ * We have a total of 4 "soft" bits available in the abstract PTE.
+ * The two mandatory software bits are Dirty and Accessed.
+ * To make nonlinear swap work according to the more recent
+ * model, we want a low order "Present" bit to indicate whether
+ * the PTE describes MMU programming or swap space.
+ */
+#define _PAGE_PRESENT (1<<0)
+#define _PAGE_DIRTY (1<<1)
+#define _PAGE_ACCESSED (1<<2)
+
+/*
+ * _PAGE_FILE is only meaningful if _PAGE_PRESENT is false, while
+ * _PAGE_DIRTY is only meaningful if _PAGE_PRESENT is true.
+ * So we can overload the bit...
+ */
+#define _PAGE_FILE _PAGE_DIRTY /* set: pagecache, unset = swap */
+
+/*
+ * For now, let's say that Valid and Present are the same thing.
+ * Alternatively, we could say that it's the "or" of R, W, and X
+ * permissions.
+ */
+#define _PAGE_VALID _PAGE_PRESENT
+
+/*
+ * We're not defining _PAGE_GLOBAL here, since there's no concept
+ * of global pages or ASIDs exposed to the Hexagon Virtual Machine,
+ * and we want to use the same page table structures and macros in
+ * the native kernel as we do in the virtual machine kernel.
+ * So we'll put up with a bit of inefficiency for now...
+ */
+
+/*
+ * Top "FOURTH" level (pgd), which for the Hexagon VM is really
+ * only the second from the bottom, pgd and pud both being collapsed.
+ * Each entry represents 4MB of virtual address space, 4K of table
+ * thus maps the full 4GB.
+ */
+#define PGDIR_SHIFT 22
+#define PTRS_PER_PGD 1024
+
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PTRS_PER_PTE 1024
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PTRS_PER_PTE 256
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PTRS_PER_PTE 64
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_256KB
+#define PTRS_PER_PTE 16
+#endif
+
+#ifdef CONFIG_PAGE_SIZE_1MB
+#define PTRS_PER_PTE 4
+#endif
+
+/* Any bigger and the PTE disappears. */
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__,\
+ pgd_val(e))
+
+/*
+ * Page Protection Constants. Includes (in this variant) cache attributes.
+ */
+extern unsigned long _dflt_cache_att;
+
+#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _dflt_cache_att)
+#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_READ | _PAGE_EXECUTE | _dflt_cache_att)
+#define PAGE_COPY PAGE_READONLY
+#define PAGE_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_READ | _PAGE_EXECUTE | _dflt_cache_att)
+#define PAGE_COPY_EXEC PAGE_EXEC
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | \
+ _PAGE_EXECUTE | _PAGE_WRITE | _dflt_cache_att)
+#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_READ | \
+ _PAGE_WRITE | _PAGE_EXECUTE | _dflt_cache_att)
+
+
+/*
+ * Aliases for mapping mmap() protection bits to page protections.
+ * These get used for static initialization, so using the _dflt_cache_att
+ * variable for the default cache attribute isn't workable. If the
+ * default gets changed at boot time, the boot option code has to
+ * update data structures like the protaction_map[] array.
+ */
+#define CACHEDEF (CACHE_DEFAULT << 6)
+
+/* Private (copy-on-write) page protections. */
+#define __P000 __pgprot(_PAGE_PRESENT | _PAGE_USER | CACHEDEF)
+#define __P001 __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | CACHEDEF)
+#define __P010 __P000 /* Write-only copy-on-write */
+#define __P011 __P001 /* Read/Write copy-on-write */
+#define __P100 __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_EXECUTE | CACHEDEF)
+#define __P101 __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_EXECUTE | \
+ _PAGE_READ | CACHEDEF)
+#define __P110 __P100 /* Write/execute copy-on-write */
+#define __P111 __P101 /* Read/Write/Execute, copy-on-write */
+
+/* Shared page protections. */
+#define __S000 __P000
+#define __S001 __P001
+#define __S010 __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_WRITE | CACHEDEF)
+#define __S011 __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | \
+ _PAGE_WRITE | CACHEDEF)
+#define __S100 __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_EXECUTE | CACHEDEF)
+#define __S101 __P101
+#define __S110 __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_EXECUTE | _PAGE_WRITE | CACHEDEF)
+#define __S111 __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | \
+ _PAGE_EXECUTE | _PAGE_WRITE | CACHEDEF)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* located in head.S */
+
+/* Seems to be zero even in architectures where the zero page is firewalled? */
+#define FIRST_USER_ADDRESS 0
+#define pte_special(pte) 0
+#define pte_mkspecial(pte) (pte)
+
+/* HUGETLB not working currently */
+#ifdef CONFIG_HUGETLB_PAGE
+#define pte_mkhuge(pte) __pte((pte_val(pte) & ~0x3) | HVM_HUGEPAGE_SIZE)
+#endif
+
+/*
+ * For now, assume that higher-level code will do TLB/MMU invalidations
+ * and don't insert that overhead into this low-level function.
+ */
+extern void sync_icache_dcache(pte_t pte);
+
+#define pte_present_exec_user(pte) \
+ ((pte_val(pte) & (_PAGE_EXECUTE | _PAGE_USER)) == \
+ (_PAGE_EXECUTE | _PAGE_USER))
+
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+ /* should really be using pte_exec, if it weren't declared later. */
+ if (pte_present_exec_user(pteval))
+ sync_icache_dcache(pteval);
+
+ *ptep = pteval;
+}
+
+/*
+ * For the Hexagon Virtual Machine MMU (or its emulation), a null/invalid
+ * L1 PTE (PMD/PGD) has 7 in the least significant bits. For the L2 PTE
+ * (Linux PTE), the key is to have bits 11..9 all zero. We'd use 0x7
+ * as a universal null entry, but some of those least significant bits
+ * are interpreted by software.
+ */
+#define _NULL_PMD 0x7
+#define _NULL_PTE 0x0
+
+static inline void pmd_clear(pmd_t *pmd_entry_ptr)
+{
+ pmd_val(*pmd_entry_ptr) = _NULL_PMD;
+}
+
+/*
+ * Conveniently, a null PTE value is invalid.
+ */
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pte_val(*ptep) = _NULL_PTE;
+}
+
+#ifdef NEED_PMD_INDEX_DESPITE_BEING_2_LEVEL
+/**
+ * pmd_index - returns the index of the entry in the PMD page
+ * which would control the given virtual address
+ */
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+#endif
+
+/**
+ * pgd_index - returns the index of the entry in the PGD page
+ * which would control the given virtual address
+ *
+ * This returns the *index* for the address in the pgd_t
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/*
+ * pgd_offset - find an offset in a page-table-directory
+ */
+#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
+
+/*
+ * pgd_offset_k - get kernel (init_mm) pgd entry pointer for addr
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/**
+ * pmd_none - check if pmd_entry is mapped
+ * @pmd_entry: pmd entry
+ *
+ * MIPS checks it against that "invalid pte table" thing.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+ return pmd_val(pmd) == _NULL_PMD;
+}
+
+/**
+ * pmd_present - is there a page table behind this?
+ * Essentially the inverse of pmd_none. We maybe
+ * save an inline instruction by defining it this
+ * way, instead of simply "!pmd_none".
+ */
+static inline int pmd_present(pmd_t pmd)
+{
+ return pmd_val(pmd) != (unsigned long)_NULL_PMD;
+}
+
+/**
+ * pmd_bad - check if a PMD entry is "bad". That might mean swapped out.
+ * As we have no known cause of badness, it's null, as it is for many
+ * architectures.
+ */
+static inline int pmd_bad(pmd_t pmd)
+{
+ return 0;
+}
+
+/*
+ * pmd_page - converts a PMD entry to a page pointer
+ */
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/**
+ * pte_none - check if pte is mapped
+ * @pte: pte_t entry
+ */
+static inline int pte_none(pte_t pte)
+{
+ return pte_val(pte) == _NULL_PTE;
+};
+
+/*
+ * pte_present - check if page is present
+ */
+static inline int pte_present(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_PRESENT;
+}
+
+/* mk_pte - make a PTE out of a page pointer and protection bits */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+/* pte_page - returns a page (frame pointer/descriptor?) based on a PTE */
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+/* pte_mkold - mark PTE as not recently accessed */
+static inline pte_t pte_mkold(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_ACCESSED;
+ return pte;
+}
+
+/* pte_mkyoung - mark PTE as recently accessed */
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_ACCESSED;
+ return pte;
+}
+
+/* pte_mkclean - mark page as in sync with backing store */
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_DIRTY;
+ return pte;
+}
+
+/* pte_mkdirty - mark page as modified */
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_DIRTY;
+ return pte;
+}
+
+/* pte_young - "is PTE marked as accessed"? */
+static inline int pte_young(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_ACCESSED;
+}
+
+/* pte_dirty - "is PTE dirty?" */
+static inline int pte_dirty(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_DIRTY;
+}
+
+/* pte_modify - set protection bits on PTE */
+static inline pte_t pte_modify(pte_t pte, pgprot_t prot)
+{
+ pte_val(pte) &= PAGE_MASK;
+ pte_val(pte) |= pgprot_val(prot);
+ return pte;
+}
+
+/* pte_wrprotect - mark page as not writable */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_WRITE;
+ return pte;
+}
+
+/* pte_mkwrite - mark page as writable */
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_WRITE;
+ return pte;
+}
+
+/* pte_mkexec - mark PTE as executable */
+static inline pte_t pte_mkexec(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_EXECUTE;
+ return pte;
+}
+
+/* pte_read - "is PTE marked as readable?" */
+static inline int pte_read(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_READ;
+}
+
+/* pte_write - "is PTE marked as writable?" */
+static inline int pte_write(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_WRITE;
+}
+
+
+/* pte_exec - "is PTE marked as executable?" */
+static inline int pte_exec(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_EXECUTE;
+}
+
+/* __pte_to_swp_entry - extract swap entry from PTE */
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+
+/* __swp_entry_to_pte - extract PTE from swap entry */
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+/* pfn_pte - convert page number and protection value to page table entry */
+#define pfn_pte(pfn, pgprot) __pte((pfn << PAGE_SHIFT) | pgprot_val(pgprot))
+
+/* pte_pfn - convert pte to page frame number */
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
+
+/*
+ * set_pte_at - update page table and do whatever magic may be
+ * necessary to make the underlying hardware/firmware take note.
+ *
+ * VM may require a virtual instruction to alert the MMU.
+ */
+#define set_pte_at(mm, addr, ptep, pte) set_pte(ptep, pte)
+
+/*
+ * May need to invoke the virtual machine as well...
+ */
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+/*
+ * pte_offset_map - returns the linear address of the page table entry
+ * corresponding to an address
+ */
+#define pte_offset_map(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+
+#define pte_offset_map_nested(pmd, addr) pte_offset_map(pmd, addr)
+
+/* pte_offset_kernel - kernel version of pte_offset */
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) (unsigned long) __va(pmd_val(*dir) & PAGE_MASK) \
+ + __pte_offset(address))
+
+/* ZERO_PAGE - returns the globally shared zero page */
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+#define __pte_offset(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+/* Nothing special about IO remapping at this point */
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/* I think this is in case we have page table caches; needed by init/main.c */
+#define pgtable_cache_init() do { } while (0)
+
+/*
+ * Swap/file PTE definitions. If _PAGE_PRESENT is zero, the rest of the
+ * PTE is interpreted as swap information. Depending on the _PAGE_FILE
+ * bit, the remaining free bits are eitehr interpreted as a file offset
+ * or a swap type/offset tuple. Rather than have the TLB fill handler
+ * test _PAGE_PRESENT, we're going to reserve the permissions bits
+ * and set them to all zeros for swap entries, which speeds up the
+ * miss handler at the cost of 3 bits of offset. That trade-off can
+ * be revisited if necessary, but Hexagon processor architecture and
+ * target applications suggest a lot of TLB misses and not much swap space.
+ *
+ * Format of swap PTE:
+ * bit 0: Present (zero)
+ * bit 1: _PAGE_FILE (zero)
+ * bits 2-6: swap type (arch independent layer uses 5 bits max)
+ * bits 7-9: bits 2:0 of offset
+ * bits 10-12: effectively _PAGE_PROTNONE (all zero)
+ * bits 13-31: bits 21:3 of swap offset
+ *
+ * Format of file PTE:
+ * bit 0: Present (zero)
+ * bit 1: _PAGE_FILE (zero)
+ * bits 2-9: bits 7:0 of offset
+ * bits 10-12: effectively _PAGE_PROTNONE (all zero)
+ * bits 13-31: bits 26:8 of swap offset
+ *
+ * The split offset makes some of the following macros a little gnarly,
+ * but there's plenty of precedent for this sort of thing.
+ */
+#define PTE_FILE_MAX_BITS 27
+
+/* Used for swap PTEs */
+#define __swp_type(swp_pte) (((swp_pte).val >> 2) & 0x1f)
+
+#define __swp_offset(swp_pte) \
+ ((((swp_pte).val >> 7) & 0x7) | (((swp_pte).val >> 10) & 0x003ffff8))
+
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { \
+ ((type << 2) | \
+ ((offset & 0x3ffff8) << 10) | ((offset & 0x7) << 7)) })
+
+/* Used for file PTEs */
+#define pte_file(pte) \
+ ((pte_val(pte) & (_PAGE_FILE | _PAGE_PRESENT)) == _PAGE_FILE)
+
+#define pte_to_pgoff(pte) \
+ (((pte_val(pte) >> 2) & 0xff) | ((pte_val(pte) >> 5) & 0x07ffff00))
+
+#define pgoff_to_pte(off) \
+ ((pte_t) { ((((off) & 0x7ffff00) << 5) | (((off) & 0xff) << 2)\
+ | _PAGE_FILE) })
+
+/* Oh boy. There are a lot of possible arch overrides found in this file. */
+#include <asm-generic/pgtable.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/processor.h b/arch/hexagon/include/asm/processor.h
new file mode 100644
index 0000000..20c5dda
--- /dev/null
+++ b/arch/hexagon/include/asm/processor.h
@@ -0,0 +1,123 @@
+/*
+ * Process/processor support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/mem-layout.h>
+#include <asm/registers.h>
+#include <asm/hexagon_vm.h>
+
+/* must be a macro */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+/* task_struct, defined elsewhere, is the "process descriptor" */
+struct task_struct;
+
+/* this is defined in arch/process.c */
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
+
+/*
+ * thread_struct is supposed to be for context switch data.
+ * Specifically, to hold the state necessary to perform switch_to...
+ */
+struct thread_struct {
+ void *switch_sp;
+};
+
+/*
+ * initializes thread_struct
+ * The only thing we have in there is switch_sp
+ * which doesn't really need to be initialized.
+ */
+
+#define INIT_THREAD { \
+}
+
+#define cpu_relax() __vmyield()
+
+/*
+ * "Unlazying all lazy status" occurs here.
+ */
+static inline void prepare_to_copy(struct task_struct *tsk)
+{
+}
+
+/*
+ * Decides where the kernel will search for a free chunk of vm space during
+ * mmaps.
+ * See also arch_get_unmapped_area.
+ * Doesn't affect if you have MAX_FIXED in the page flags set though...
+ *
+ * Apparently the convention is that ld.so will ask for "unmapped" private
+ * memory to be allocated SOMEWHERE, but it also asks for memory explicitly
+ * via MAP_FIXED at the lower * addresses starting at VA=0x0.
+ *
+ * If the two requests collide, you get authentic segfaulting action, so
+ * you have to kick the "unmapped" base requests higher up.
+ */
+#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE/3))
+
+
+#define task_pt_regs(task) \
+ ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE) - 1)
+
+#define KSTK_EIP(tsk) (pt_elr(task_pt_regs(tsk)))
+#define KSTK_ESP(tsk) (pt_psp(task_pt_regs(tsk)))
+
+/* Free all resources held by a thread; defined in process.c */
+extern void release_thread(struct task_struct *dead_task);
+
+/* Get wait channel for task P. */
+extern unsigned long get_wchan(struct task_struct *p);
+
+/* The following stuff is pretty HEXAGON specific. */
+
+/* This is really just here for __switch_to.
+ Offsets are pulled via asm-offsets.c */
+
+/*
+ * No real reason why VM and native switch stacks should be different.
+ * Ultimately this should merge. Note that Rev C. ABI called out only
+ * R24-27 as callee saved GPRs needing explicit attention (R29-31 being
+ * dealt with automagically by allocframe), but the current ABI has
+ * more, R16-R27. By saving more, the worst case is that we waste some
+ * cycles if building with the old compilers.
+ */
+
+struct hexagon_switch_stack {
+ unsigned long long r1716;
+ unsigned long long r1918;
+ unsigned long long r2120;
+ unsigned long long r2322;
+ unsigned long long r2524;
+ unsigned long long r2726;
+ unsigned long fp;
+ unsigned long lr;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/hexagon/include/asm/ptrace.h b/arch/hexagon/include/asm/ptrace.h
new file mode 100644
index 0000000..3d2f607
--- /dev/null
+++ b/arch/hexagon/include/asm/ptrace.h
@@ -0,0 +1,35 @@
+/*
+ * Ptrace definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#include <asm/registers.h>
+
+#define instruction_pointer(regs) pt_elr(regs)
+#define user_stack_pointer(regs) ((regs)->r29)
+
+#define profile_pc(regs) instruction_pointer(regs)
+
+/* kprobe-based event tracer support */
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+
+#endif
diff --git a/arch/hexagon/include/asm/registers.h b/arch/hexagon/include/asm/registers.h
new file mode 100644
index 0000000..4dd741b
--- /dev/null
+++ b/arch/hexagon/include/asm/registers.h
@@ -0,0 +1,236 @@
+/*
+ * Register definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_REGISTERS_H
+#define _ASM_REGISTERS_H
+
+#define SP r29
+
+#ifndef __ASSEMBLY__
+
+/* See kernel/entry.S for further documentation. */
+
+/*
+ * Entry code copies the event record out of guest registers into
+ * this structure (which is on the stack).
+ */
+
+struct hvm_event_record {
+ unsigned long vmel; /* Event Linkage (return address) */
+ unsigned long vmest; /* Event context - pre-event SSR values */
+ unsigned long vmpsp; /* Previous stack pointer */
+ unsigned long vmbadva; /* Bad virtual address for addressing events */
+};
+
+struct pt_regs {
+ long restart_r0; /* R0 checkpoint for syscall restart */
+ long syscall_nr; /* Only used in system calls */
+ union {
+ struct {
+ unsigned long usr;
+ unsigned long preds;
+ };
+ long long int predsusr;
+ };
+ union {
+ struct {
+ unsigned long m0;
+ unsigned long m1;
+ };
+ long long int m1m0;
+ };
+ union {
+ struct {
+ unsigned long sa1;
+ unsigned long lc1;
+ };
+ long long int lc1sa1;
+ };
+ union {
+ struct {
+ unsigned long sa0;
+ unsigned long lc0;
+ };
+ long long int lc0sa0;
+ };
+ union {
+ struct {
+ unsigned long gp;
+ unsigned long ugp;
+ };
+ long long int ugpgp;
+ };
+ /*
+ * Be extremely careful with rearranging these, if at all. Some code
+ * assumes the 32 registers exist exactly like this in memory;
+ * e.g. kernel/ptrace.c
+ * e.g. kernel/signal.c (restore_sigcontext)
+ */
+ union {
+ struct {
+ unsigned long r00;
+ unsigned long r01;
+ };
+ long long int r0100;
+ };
+ union {
+ struct {
+ unsigned long r02;
+ unsigned long r03;
+ };
+ long long int r0302;
+ };
+ union {
+ struct {
+ unsigned long r04;
+ unsigned long r05;
+ };
+ long long int r0504;
+ };
+ union {
+ struct {
+ unsigned long r06;
+ unsigned long r07;
+ };
+ long long int r0706;
+ };
+ union {
+ struct {
+ unsigned long r08;
+ unsigned long r09;
+ };
+ long long int r0908;
+ };
+ union {
+ struct {
+ unsigned long r10;
+ unsigned long r11;
+ };
+ long long int r1110;
+ };
+ union {
+ struct {
+ unsigned long r12;
+ unsigned long r13;
+ };
+ long long int r1312;
+ };
+ union {
+ struct {
+ unsigned long r14;
+ unsigned long r15;
+ };
+ long long int r1514;
+ };
+ union {
+ struct {
+ unsigned long r16;
+ unsigned long r17;
+ };
+ long long int r1716;
+ };
+ union {
+ struct {
+ unsigned long r18;
+ unsigned long r19;
+ };
+ long long int r1918;
+ };
+ union {
+ struct {
+ unsigned long r20;
+ unsigned long r21;
+ };
+ long long int r2120;
+ };
+ union {
+ struct {
+ unsigned long r22;
+ unsigned long r23;
+ };
+ long long int r2322;
+ };
+ union {
+ struct {
+ unsigned long r24;
+ unsigned long r25;
+ };
+ long long int r2524;
+ };
+ union {
+ struct {
+ unsigned long r26;
+ unsigned long r27;
+ };
+ long long int r2726;
+ };
+ union {
+ struct {
+ unsigned long r28;
+ unsigned long r29;
+ };
+ long long int r2928;
+ };
+ union {
+ struct {
+ unsigned long r30;
+ unsigned long r31;
+ };
+ long long int r3130;
+ };
+ /* VM dispatch pushes event record onto stack - we can build on it */
+ struct hvm_event_record hvmer;
+};
+
+/* Defines to conveniently access the values */
+
+/*
+ * As of the VM spec 0.5, these registers are now set/retrieved via a
+ * VM call. On the in-bound side, we just fetch the values
+ * at the entry points and stuff them into the old record in pt_regs.
+ * However, on the outbound side, probably at VM rte, we set the
+ * registers back.
+ */
+
+#define pt_elr(regs) ((regs)->hvmer.vmel)
+#define pt_set_elr(regs, val) ((regs)->hvmer.vmel = (val))
+#define pt_cause(regs) ((regs)->hvmer.vmest & (HVM_VMEST_CAUSE_MSK))
+#define user_mode(regs) \
+ (((regs)->hvmer.vmest & (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT)) != 0)
+#define ints_enabled(regs) \
+ (((regs)->hvmer.vmest & (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)) != 0)
+#define pt_psp(regs) ((regs)->hvmer.vmpsp)
+#define pt_badva(regs) ((regs)->hvmer.vmbadva)
+
+#define pt_set_rte_sp(regs, sp) do {\
+ pt_psp(regs) = (sp);\
+ (regs)->SP = (unsigned long) &((regs)->hvmer);\
+ } while (0)
+
+#define pt_set_kmode(regs) \
+ (regs)->hvmer.vmest = (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)
+
+#define pt_set_usermode(regs) \
+ (regs)->hvmer.vmest = (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT) \
+ | (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)
+
+#endif /* ifndef __ASSEMBLY */
+
+#endif
diff --git a/arch/hexagon/include/asm/setup.h b/arch/hexagon/include/asm/setup.h
new file mode 100644
index 0000000..3b754c5
--- /dev/null
+++ b/arch/hexagon/include/asm/setup.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+#include <linux/init.h>
+#include <asm-generic/setup.h>
+
+extern char external_cmdline_buffer;
+
+void __init setup_arch_memory(void);
+
+#endif
diff --git a/arch/hexagon/include/asm/sigcontext.h b/arch/hexagon/include/asm/sigcontext.h
new file mode 100644
index 0000000..ce6dcd9
--- /dev/null
+++ b/arch/hexagon/include/asm/sigcontext.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/user.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked. Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+ struct user_regs_struct sc_regs;
+} __aligned(8);
+
+#endif
diff --git a/arch/hexagon/include/asm/signal.h b/arch/hexagon/include/asm/signal.h
new file mode 100644
index 0000000..471c056
--- /dev/null
+++ b/arch/hexagon/include/asm/signal.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+extern unsigned long __rt_sigtramp_template[2];
+
+#include <asm-generic/signal.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/smp.h b/arch/hexagon/include/asm/smp.h
new file mode 100644
index 0000000..87c869a
--- /dev/null
+++ b/arch/hexagon/include/asm/smp.h
@@ -0,0 +1,44 @@
+/*
+ * SMP definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/cpumask.h>
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+enum ipi_message_type {
+ IPI_NOP = 0,
+ IPI_RESCHEDULE = 1,
+ IPI_CALL_FUNC,
+ IPI_CALL_FUNC_SINGLE,
+ IPI_CPU_STOP,
+ IPI_TIMER,
+};
+
+extern void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg);
+extern void smp_start_cpus(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+extern void smp_vm_unmask_irq(void *info);
+
+#endif
diff --git a/arch/hexagon/include/asm/spinlock.h b/arch/hexagon/include/asm/spinlock.h
new file mode 100644
index 0000000..168a920
--- /dev/null
+++ b/arch/hexagon/include/asm/spinlock.h
@@ -0,0 +1,186 @@
+/*
+ * Spinlock support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#include <asm/irqflags.h>
+
+/*
+ * This file is pulled in for SMP builds.
+ * Really need to check all the barrier stuff for "true" SMP
+ */
+
+/*
+ * Read locks:
+ * - load the lock value
+ * - increment it
+ * - if the lock value is still negative, go back and try again.
+ * - unsuccessful store is unsuccessful. Go back and try again. Loser.
+ * - successful store new lock value if positive -> lock acquired
+ */
+static inline void arch_read_lock(arch_rwlock_t *lock)
+{
+ __asm__ __volatile__(
+ "1: R6 = memw_locked(%0);\n"
+ " { P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
+ " { if !P3 jump 1b; }\n"
+ " memw_locked(%0,P3) = R6;\n"
+ " { if !P3 jump 1b; }\n"
+ :
+ : "r" (&lock->lock)
+ : "memory", "r6", "p3"
+ );
+
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *lock)
+{
+ __asm__ __volatile__(
+ "1: R6 = memw_locked(%0);\n"
+ " R6 = add(R6,#-1);\n"
+ " memw_locked(%0,P3) = R6\n"
+ " if !P3 jump 1b;\n"
+ :
+ : "r" (&lock->lock)
+ : "memory", "r6", "p3"
+ );
+
+}
+
+/* I think this returns 0 on fail, 1 on success. */
+static inline int arch_read_trylock(arch_rwlock_t *lock)
+{
+ int temp;
+ __asm__ __volatile__(
+ " R6 = memw_locked(%1);\n"
+ " { %0 = #0; P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
+ " { if !P3 jump 1f; }\n"
+ " memw_locked(%1,P3) = R6;\n"
+ " { %0 = P3 }\n"
+ "1:\n"
+ : "=&r" (temp)
+ : "r" (&lock->lock)
+ : "memory", "r6", "p3"
+ );
+ return temp;
+}
+
+static inline int arch_read_can_lock(arch_rwlock_t *rwlock)
+{
+ return rwlock->lock == 0;
+}
+
+static inline int arch_write_can_lock(arch_rwlock_t *rwlock)
+{
+ return rwlock->lock == 0;
+}
+
+/* Stuffs a -1 in the lock value? */
+static inline void arch_write_lock(arch_rwlock_t *lock)
+{
+ __asm__ __volatile__(
+ "1: R6 = memw_locked(%0)\n"
+ " { P3 = cmp.eq(R6,#0); R6 = #-1;}\n"
+ " { if !P3 jump 1b; }\n"
+ " memw_locked(%0,P3) = R6;\n"
+ " { if !P3 jump 1b; }\n"
+ :
+ : "r" (&lock->lock)
+ : "memory", "r6", "p3"
+ );
+}
+
+
+static inline int arch_write_trylock(arch_rwlock_t *lock)
+{
+ int temp;
+ __asm__ __volatile__(
+ " R6 = memw_locked(%1)\n"
+ " { %0 = #0; P3 = cmp.eq(R6,#0); R6 = #-1;}\n"
+ " { if !P3 jump 1f; }\n"
+ " memw_locked(%1,P3) = R6;\n"
+ " %0 = P3;\n"
+ "1:\n"
+ : "=&r" (temp)
+ : "r" (&lock->lock)
+ : "memory", "r6", "p3"
+ );
+ return temp;
+
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *lock)
+{
+ smp_mb();
+ lock->lock = 0;
+}
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+ __asm__ __volatile__(
+ "1: R6 = memw_locked(%0);\n"
+ " P3 = cmp.eq(R6,#0);\n"
+ " { if !P3 jump 1b; R6 = #1; }\n"
+ " memw_locked(%0,P3) = R6;\n"
+ " { if !P3 jump 1b; }\n"
+ :
+ : "r" (&lock->lock)
+ : "memory", "r6", "p3"
+ );
+
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+ smp_mb();
+ lock->lock = 0;
+}
+
+static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
+{
+ int temp;
+ __asm__ __volatile__(
+ " R6 = memw_locked(%1);\n"
+ " P3 = cmp.eq(R6,#0);\n"
+ " { if !P3 jump 1f; R6 = #1; %0 = #0; }\n"
+ " memw_locked(%1,P3) = R6;\n"
+ " %0 = P3;\n"
+ "1:\n"
+ : "=&r" (temp)
+ : "r" (&lock->lock)
+ : "memory", "r6", "p3"
+ );
+ return temp;
+}
+
+/*
+ * SMP spinlocks are intended to allow only a single CPU at the lock
+ */
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
+#define arch_spin_unlock_wait(lock) \
+ do {while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
+#define arch_spin_is_locked(x) ((x)->lock != 0)
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#endif
diff --git a/arch/hexagon/include/asm/spinlock_types.h b/arch/hexagon/include/asm/spinlock_types.h
new file mode 100644
index 0000000..5e937af
--- /dev/null
+++ b/arch/hexagon/include/asm/spinlock_types.h
@@ -0,0 +1,42 @@
+/*
+ * Spinlock support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SPINLOCK_TYPES_H
+#define _ASM_SPINLOCK_TYPES_H
+
+#include <linux/version.h>
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+ volatile unsigned int lock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
+
+typedef struct {
+ volatile unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED { 0 }
+
+#endif
diff --git a/arch/hexagon/include/asm/string.h b/arch/hexagon/include/asm/string.h
new file mode 100644
index 0000000..f4489c1
--- /dev/null
+++ b/arch/hexagon/include/asm/string.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_STRING_H_
+#define _ASM_STRING_H_
+
+#ifdef __KERNEL__
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+/* ToDo: use dczeroa, accelerate the compiler-constant zero case */
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__to, int c, size_t __n);
+#endif
+
+
+#endif /* _ASM_STRING_H_ */
diff --git a/arch/hexagon/include/asm/suspend.h b/arch/hexagon/include/asm/suspend.h
new file mode 100644
index 0000000..089dd82
--- /dev/null
+++ b/arch/hexagon/include/asm/suspend.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SUSPEND_H
+#define _ASM_SUSPEND_H
+
+static inline int arch_prepare_suspend(void)
+{
+ return 0;
+}
+
+#endif
diff --git a/arch/hexagon/include/asm/swab.h b/arch/hexagon/include/asm/swab.h
new file mode 100644
index 0000000..99cf0be
--- /dev/null
+++ b/arch/hexagon/include/asm/swab.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#define __SWAB_64_THRU_32__
+
+#endif
diff --git a/arch/hexagon/include/asm/syscall.h b/arch/hexagon/include/asm/syscall.h
new file mode 100644
index 0000000..3e7d61d
--- /dev/null
+++ b/arch/hexagon/include/asm/syscall.h
@@ -0,0 +1,54 @@
+/*
+ * Syscall support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_HEXAGON_SYSCALL_H
+#define _ASM_HEXAGON_SYSCALL_H
+
+typedef long (*syscall_fn)(unsigned long, unsigned long,
+ unsigned long, unsigned long,
+ unsigned long, unsigned long);
+
+asmlinkage int sys_execve(char __user *ufilename, char __user * __user *argv,
+ char __user * __user *envp);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+ unsigned long parent_tidp, unsigned long child_tidp);
+
+#define sys_execve sys_execve
+#define sys_clone sys_clone
+
+#include <asm-generic/syscalls.h>
+
+extern void *sys_call_table[];
+
+static inline long syscall_get_nr(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r06;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+ memcpy(args, &(®s->r00)[i], n * sizeof(args[0]));
+}
+#endif
diff --git a/arch/hexagon/include/asm/system.h b/arch/hexagon/include/asm/system.h
new file mode 100644
index 0000000..323ed1d
--- /dev/null
+++ b/arch/hexagon/include/asm/system.h
@@ -0,0 +1,126 @@
+/*
+ * System level definitions for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <linux/irqflags.h>
+#include <asm/atomic.h>
+#include <asm/hexagon_vm.h>
+
+struct thread_struct;
+
+extern struct task_struct *__switch_to(struct task_struct *,
+ struct task_struct *,
+ struct task_struct *);
+
+#define switch_to(p, n, r) do {\
+ r = __switch_to((p), (n), (r));\
+} while (0)
+
+
+#define rmb() barrier()
+#define read_barrier_depends() barrier()
+#define wmb() barrier()
+#define mb() barrier()
+#define smp_rmb() barrier()
+#define smp_read_barrier_depends() barrier()
+#define smp_wmb() barrier()
+#define smp_mb() barrier()
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+/*
+ * __xchg - atomically exchange a register and a memory location
+ * @x: value to swap
+ * @ptr: pointer to memory
+ * @size: size of the value
+ *
+ * Only 4 bytes supported currently.
+ *
+ * Note: there was an errata for V2 about .new's and memw_locked.
+ *
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+ int size)
+{
+ unsigned long retval;
+
+ /* Can't seem to use printk or panic here, so just stop */
+ if (size != 4) do { asm volatile("brkpt;\n"); } while (1);
+
+ __asm__ __volatile__ (
+ "1: %0 = memw_locked(%1);\n" /* load into retval */
+ " memw_locked(%1,P0) = %2;\n" /* store into memory */
+ " if !P0 jump 1b;\n"
+ : "=&r" (retval)
+ : "r" (ptr), "r" (x)
+ : "memory", "p0"
+ );
+ return retval;
+}
+
+/*
+ * Atomically swap the contents of a register with memory. Should be atomic
+ * between multiple CPU's and within interrupts on the same CPU.
+ */
+#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), \
+ sizeof(*(ptr))))
+
+/* Set a value and use a memory barrier. Used by the scheduler somewhere. */
+#define set_mb(var, value) \
+ do { var = value; mb(); } while (0)
+
+/*
+ * see rt-mutex-design.txt; cmpxchg supposedly checks if *ptr == A and swaps.
+ * looks just like atomic_cmpxchg on our arch currently with a bunch of
+ * variable casting.
+ */
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define cmpxchg(ptr, old, new) \
+({ \
+ __typeof__(ptr) __ptr = (ptr); \
+ __typeof__(*(ptr)) __old = (old); \
+ __typeof__(*(ptr)) __new = (new); \
+ __typeof__(*(ptr)) __oldval = 0; \
+ \
+ asm volatile( \
+ "1: %0 = memw_locked(%1);\n" \
+ " { P0 = cmp.eq(%0,%2);\n" \
+ " if (!P0.new) jump:nt 2f; }\n" \
+ " memw_locked(%1,p0) = %3;\n" \
+ " if (!P0) jump 1b;\n" \
+ "2:\n" \
+ : "=&r" (__oldval) \
+ : "r" (__ptr), "r" (__old), "r" (__new) \
+ : "memory", "p0" \
+ ); \
+ __oldval; \
+})
+
+/* Should probably shoot for an 8-byte aligned stack pointer */
+#define STACK_MASK (~7)
+#define arch_align_stack(x) (x & STACK_MASK)
+
+#endif
diff --git a/arch/hexagon/include/asm/thread_info.h b/arch/hexagon/include/asm/thread_info.h
new file mode 100644
index 0000000..9c2934f
--- /dev/null
+++ b/arch/hexagon/include/asm/thread_info.h
@@ -0,0 +1,154 @@
+/*
+ * Thread support for the Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/registers.h>
+#include <asm/page.h>
+#endif
+
+#define THREAD_SHIFT 12
+#define THREAD_SIZE (1<<THREAD_SHIFT)
+
+#if THREAD_SHIFT >= PAGE_SHIFT
+#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
+#else /* don't use standard allocator */
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+extern struct thread_info *alloc_thread_info_node(struct task_struct *tsk, int node);
+extern void free_thread_info(struct thread_info *ti);
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+/*
+ * This is union'd with the "bottom" of the kernel stack.
+ * It keeps track of thread info which is handy for routines
+ * to access quickly.
+ */
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ __u32 cpu; /* current cpu */
+ int preempt_count; /* 0=>preemptible,<0=>BUG */
+ mm_segment_t addr_limit; /* segmentation sux */
+ /*
+ * used for syscalls somehow;
+ * seems to have a function pointer and four arguments
+ */
+ struct restart_block restart_block;
+ /* Points to the current pt_regs frame */
+ struct pt_regs *regs;
+ /*
+ * saved kernel sp at switch_to time;
+ * not sure if this is used (it's not in the VM model it seems;
+ * see thread_struct)
+ */
+ unsigned long sp;
+};
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif /* __ASSEMBLY__ */
+
+/* looks like "linux/hardirq.h" uses this. */
+
+#define PREEMPT_ACTIVE 0x10000000
+
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+ .sp = 0, \
+ .regs = NULL, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/* Tacky preprocessor trickery */
+#define qqstr(s) qstr(s)
+#define qstr(s) #s
+#define QUOTED_THREADINFO_REG qqstr(THREADINFO_REG)
+
+register struct thread_info *__current_thread_info asm(QUOTED_THREADINFO_REG);
+#define current_thread_info() __current_thread_info
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files
+ * may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_SINGLESTEP 4 /* restore ss @ return to usr mode */
+#define TIF_IRET 5 /* return with iret */
+#define TIF_RESTORE_SIGMASK 6 /* restore sig mask in do_signal() */
+/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_POLLING_NRFLAG 16
+#define TIF_MEMDIE 17 /* OOM killer killed process */
+
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_IRET (1 << TIF_IRET)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+
+/* work to do on interrupt/exception return - All but TIF_SYSCALL_TRACE */
+#define _TIF_WORK_MASK (0x0000FFFF & ~_TIF_SYSCALL_TRACE)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK 0x0000FFFF
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/hexagon/include/asm/time.h b/arch/hexagon/include/asm/time.h
new file mode 100644
index 0000000..081b82c
--- /dev/null
+++ b/arch/hexagon/include/asm/time.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef ASM_TIME_H
+#define ASM_TIME_H
+
+extern cycles_t pcycle_freq_mhz;
+extern cycles_t thread_freq_mhz;
+extern cycles_t sleep_clk_freq;
+
+void setup_percpu_clockdev(void);
+void ipi_timer(void);
+
+#endif
diff --git a/arch/hexagon/include/asm/timer-regs.h b/arch/hexagon/include/asm/timer-regs.h
new file mode 100644
index 0000000..d80db23
--- /dev/null
+++ b/arch/hexagon/include/asm/timer-regs.h
@@ -0,0 +1,39 @@
+/*
+ * Timer support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+/* This stuff should go into a platform specific file */
+#define TCX0_CLK_RATE 19200
+#define TIMER_ENABLE 0
+#define TIMER_CLR_ON_MATCH 1
+
+/*
+ * 8x50 HDD Specs 5-8. Simulator co-sim not fixed until
+ * release 1.1, and then it's "adjustable" and probably not defaulted.
+ */
+#define RTOS_TIMER_INT 3
+#ifdef CONFIG_HEXAGON_COMET
+#define RTOS_TIMER_REGS_ADDR 0xAB000000UL
+#endif
+#define SLEEP_CLK_RATE 32000
+
+#endif
diff --git a/arch/hexagon/include/asm/timex.h b/arch/hexagon/include/asm/timex.h
new file mode 100644
index 0000000..b11c62b
--- /dev/null
+++ b/arch/hexagon/include/asm/timex.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm-generic/timex.h>
+#include <asm/timer-regs.h>
+
+/* Using TCX0 as our clock. CLOCK_TICK_RATE scheduled to be removed. */
+#define CLOCK_TICK_RATE TCX0_CLK_RATE
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+static inline int read_current_timer(unsigned long *timer_val)
+{
+ *timer_val = (unsigned long) __vmgettime();
+ return 0;
+}
+
+#endif
diff --git a/arch/hexagon/include/asm/tlb.h b/arch/hexagon/include/asm/tlb.h
new file mode 100644
index 0000000..473abde
--- /dev/null
+++ b/arch/hexagon/include/asm/tlb.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <linux/pagemap.h>
+#include <asm/tlbflush.h>
+
+/*
+ * We don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/tlbflush.h b/arch/hexagon/include/asm/tlbflush.h
new file mode 100644
index 0000000..b89a902
--- /dev/null
+++ b/arch/hexagon/include/asm/tlbflush.h
@@ -0,0 +1,58 @@
+/*
+ * TLB flush support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+/*
+ * TLB flushing -- in "SMP", these routines get defined to be the
+ * ones from smp.c, else they are some local flavors.
+ */
+
+/*
+ * These functions are commonly macros, but in the interests of
+ * VM vs. native implementation and code size, we simply declare
+ * the function prototypes here.
+ */
+extern void tlb_flush_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_one(unsigned long);
+
+/*
+ * "This is called in munmap when we have freed up some page-table pages.
+ * We don't need to do anything here..."
+ *
+ * The VM kernel doesn't walk page tables, and they are passed to the VMM
+ * by logical address. There doesn't seem to be any possibility that they
+ * could be referenced by the VM kernel based on a stale mapping, since
+ * they would only be located by consulting the mm structure, and they
+ * will have been purged from that structure by the munmap. Seems like
+ * a noop on HVM as well.
+ */
+#define flush_tlb_pgtables(mm, start, end)
+
+#endif
diff --git a/arch/hexagon/include/asm/traps.h b/arch/hexagon/include/asm/traps.h
new file mode 100644
index 0000000..6a407f6
--- /dev/null
+++ b/arch/hexagon/include/asm/traps.h
@@ -0,0 +1,29 @@
+/*
+ * Trap support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_HEXAGON_TRAPS_H
+#define _ASM_HEXAGON_TRAPS_H
+
+#include <asm/registers.h>
+
+extern int die(const char *str, struct pt_regs *regs, long err);
+extern int die_if_kernel(char *str, struct pt_regs *regs, long err);
+
+#endif /* _ASM_HEXAGON_TRAPS_H */
diff --git a/arch/hexagon/include/asm/uaccess.h b/arch/hexagon/include/asm/uaccess.h
new file mode 100644
index 0000000..7e706ea
--- /dev/null
+++ b/arch/hexagon/include/asm/uaccess.h
@@ -0,0 +1,116 @@
+/*
+ * User memory access support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/segment.h>
+#include <asm/sections.h>
+
+/*
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
+ * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ * to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block *may* be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * User address space in Hexagon, like x86, goes to 0xbfffffff, so the
+ * simple MSB-based tests used by MIPS won't work. Some further
+ * optimization is probably possible here, but for now, keep it
+ * reasonably simple and not *too* slow. After all, we've got the
+ * MMU for backup.
+ */
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define __access_ok(addr, size) \
+ ((get_fs().seg == KERNEL_DS.seg) || \
+ (((unsigned long)addr < get_fs().seg) && \
+ (unsigned long)size < (get_fs().seg - (unsigned long)addr)))
+
+/*
+ * When a kernel-mode page fault is taken, the faulting instruction
+ * address is checked against a table of exception_table_entries.
+ * Each entry is a tuple of the address of an instruction that may
+ * be authorized to fault, and the address at which execution should
+ * be resumed instead of the faulting instruction, so as to effect
+ * a workaround.
+ */
+
+/* Assembly somewhat optimized copy routines */
+unsigned long __copy_from_user_hexagon(void *to, const void __user *from,
+ unsigned long n);
+unsigned long __copy_to_user_hexagon(void __user *to, const void *from,
+ unsigned long n);
+
+#define __copy_from_user(to, from, n) __copy_from_user_hexagon(to, from, n)
+#define __copy_to_user(to, from, n) __copy_to_user_hexagon(to, from, n)
+
+/*
+ * XXX todo: some additonal performance gain is possible by
+ * implementing __copy_to/from_user_inatomic, which is much
+ * like __copy_to/from_user, but performs slightly less checking.
+ */
+
+__kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count);
+#define __clear_user(a, s) __clear_user_hexagon((a), (s))
+
+#define __strncpy_from_user(dst, src, n) hexagon_strncpy_from_user(dst, src, n)
+
+/* get around the ifndef in asm-generic/uaccess.h */
+#define __strnlen_user __strnlen_user
+
+extern long __strnlen_user(const char __user *src, long n);
+
+static inline long hexagon_strncpy_from_user(char *dst, const char __user *src,
+ long n);
+
+#include <asm-generic/uaccess.h>
+
+/* Todo: an actual accelerated version of this. */
+static inline long hexagon_strncpy_from_user(char *dst, const char __user *src,
+ long n)
+{
+ long res = __strnlen_user(src, n);
+
+ /* return from strnlen can't be zero -- that would be rubbish. */
+
+ if (res > n) {
+ copy_from_user(dst, src, n);
+ return n;
+ } else {
+ copy_from_user(dst, src, res);
+ return res-1;
+ }
+}
+
+#endif
diff --git a/arch/hexagon/include/asm/unistd.h b/arch/hexagon/include/asm/unistd.h
new file mode 100644
index 0000000..4d0ecde
--- /dev/null
+++ b/arch/hexagon/include/asm/unistd.h
@@ -0,0 +1,36 @@
+/*
+ * Syscall support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#if !defined(_ASM_HEXAGON_UNISTD_H) || defined(__SYSCALL)
+#define _ASM_HEXAGON_UNISTD_H
+
+/*
+ * The kernel pulls this unistd.h in three different ways:
+ * 1. the "normal" way which gets all the __NR defines
+ * 2. with __SYSCALL defined to produce function declarations
+ * 3. with __SYSCALL defined to produce syscall table initialization
+ * See also: syscalltab.c
+ */
+
+#define sys_mmap2 sys_mmap_pgoff
+
+#include <asm-generic/unistd.h>
+
+#endif
diff --git a/arch/hexagon/include/asm/user.h b/arch/hexagon/include/asm/user.h
new file mode 100644
index 0000000..3a55078
--- /dev/null
+++ b/arch/hexagon/include/asm/user.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef HEXAGON_ASM_USER_H
+#define HEXAGON_ASM_USER_H
+
+/*
+ * Layout for registers passed in elf core dumps to userspace.
+ *
+ * Basically a rearranged subset of "pt_regs".
+ *
+ * Interested parties: libc, gdb...
+ */
+
+struct user_regs_struct {
+ unsigned long r0;
+ unsigned long r1;
+ unsigned long r2;
+ unsigned long r3;
+ unsigned long r4;
+ unsigned long r5;
+ unsigned long r6;
+ unsigned long r7;
+ unsigned long r8;
+ unsigned long r9;
+ unsigned long r10;
+ unsigned long r11;
+ unsigned long r12;
+ unsigned long r13;
+ unsigned long r14;
+ unsigned long r15;
+ unsigned long r16;
+ unsigned long r17;
+ unsigned long r18;
+ unsigned long r19;
+ unsigned long r20;
+ unsigned long r21;
+ unsigned long r22;
+ unsigned long r23;
+ unsigned long r24;
+ unsigned long r25;
+ unsigned long r26;
+ unsigned long r27;
+ unsigned long r28;
+ unsigned long r29;
+ unsigned long r30;
+ unsigned long r31;
+ unsigned long sa0;
+ unsigned long lc0;
+ unsigned long sa1;
+ unsigned long lc1;
+ unsigned long m0;
+ unsigned long m1;
+ unsigned long usr;
+ unsigned long p3_0;
+ unsigned long gp;
+ unsigned long ugp;
+ unsigned long pc;
+ unsigned long cause;
+ unsigned long badva;
+ unsigned long pad1; /* pad out to 48 words total */
+ unsigned long pad2; /* pad out to 48 words total */
+ unsigned long pad3; /* pad out to 48 words total */
+};
+
+#endif
diff --git a/arch/hexagon/include/asm/vdso.h b/arch/hexagon/include/asm/vdso.h
new file mode 100644
index 0000000..2d95cbb
--- /dev/null
+++ b/arch/hexagon/include/asm/vdso.h
@@ -0,0 +1,30 @@
+/*
+ * vDSO implementation for Hexagon
+ *
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ASM_VDSO_H
+#define __ASM_VDSO_H
+
+#include <linux/types.h>
+
+struct hexagon_vdso {
+ u32 rt_signal_trampoline[2];
+};
+
+#endif /* __ASM_VDSO_H */
diff --git a/arch/hexagon/include/asm/vm_fault.h b/arch/hexagon/include/asm/vm_fault.h
new file mode 100644
index 0000000..cacda36
--- /dev/null
+++ b/arch/hexagon/include/asm/vm_fault.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_HEXAGON_VM_FAULT_H
+#define _ASM_HEXAGON_VM_FAULT_H
+
+extern void execute_protection_fault(struct pt_regs *);
+extern void write_protection_fault(struct pt_regs *);
+extern void read_protection_fault(struct pt_regs *);
+
+#endif
diff --git a/arch/hexagon/include/asm/vm_mmu.h b/arch/hexagon/include/asm/vm_mmu.h
new file mode 100644
index 0000000..580462d
--- /dev/null
+++ b/arch/hexagon/include/asm/vm_mmu.h
@@ -0,0 +1,111 @@
+/*
+ * Hexagon VM page table entry definitions
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _ASM_VM_MMU_H
+#define _ASM_VM_MMU_H
+
+/*
+ * Shift, mask, and other constants for the Hexagon Virtual Machine
+ * page tables.
+ *
+ * Virtual machine MMU allows first-level entries to either be
+ * single-level lookup PTEs for very large pages, or PDEs pointing
+ * to second-level PTEs for smaller pages. If PTE is single-level,
+ * the least significant bits cannot be used as software bits to encode
+ * virtual memory subsystem information about the page, and that state
+ * must be maintained in some parallel data structure.
+ */
+
+/* S or Page Size field in PDE */
+#define __HVM_PDE_S (0x7 << 0)
+#define __HVM_PDE_S_4KB 0
+#define __HVM_PDE_S_16KB 1
+#define __HVM_PDE_S_64KB 2
+#define __HVM_PDE_S_256KB 3
+#define __HVM_PDE_S_1MB 4
+#define __HVM_PDE_S_4MB 5
+#define __HVM_PDE_S_16MB 6
+#define __HVM_PDE_S_INVALID 7
+
+/* Masks for L2 page table pointer, as function of page size */
+#define __HVM_PDE_PTMASK_4KB 0xfffff000
+#define __HVM_PDE_PTMASK_16KB 0xfffffc00
+#define __HVM_PDE_PTMASK_64KB 0xffffff00
+#define __HVM_PDE_PTMASK_256KB 0xffffffc0
+#define __HVM_PDE_PTMASK_1MB 0xfffffff0
+
+/*
+ * Virtual Machine PTE Bits/Fields
+ */
+#define __HVM_PTE_T (1<<4)
+#define __HVM_PTE_U (1<<5)
+#define __HVM_PTE_C (0x7<<6)
+#define __HVM_PTE_CVAL(pte) (((pte) & __HVM_PTE_C) >> 6)
+#define __HVM_PTE_R (1<<9)
+#define __HVM_PTE_W (1<<10)
+#define __HVM_PTE_X (1<<11)
+
+/*
+ * Cache Attributes, to be shifted as necessary for virtual/physical PTEs
+ */
+
+#define __HEXAGON_C_WB 0x0 /* Write-back, no L2 */
+#define __HEXAGON_C_WT 0x1 /* Write-through, no L2 */
+#define __HEXAGON_C_DEV 0x4 /* Device register space */
+#define __HEXAGON_C_WT_L2 0x5 /* Write-through, with L2 */
+/* this really should be #if CONFIG_HEXAGON_ARCH = 2 but that's not defined */
+#if defined(CONFIG_HEXAGON_COMET) || defined(CONFIG_QDSP6_ST1)
+#define __HEXAGON_C_UNC __HEXAGON_C_DEV
+#else
+#define __HEXAGON_C_UNC 0x6 /* Uncached memory */
+#endif
+#define __HEXAGON_C_WB_L2 0x7 /* Write-back, with L2 */
+
+/*
+ * This can be overriden, but we're defaulting to the most aggressive
+ * cache policy, the better to find bugs sooner.
+ */
+
+#define CACHE_DEFAULT __HEXAGON_C_WB_L2
+
+/* Masks for physical page address, as a function of page size */
+
+#define __HVM_PTE_PGMASK_4KB 0xfffff000
+#define __HVM_PTE_PGMASK_16KB 0xffffc000
+#define __HVM_PTE_PGMASK_64KB 0xffff0000
+#define __HVM_PTE_PGMASK_256KB 0xfffc0000
+#define __HVM_PTE_PGMASK_1MB 0xfff00000
+
+/* Masks for single-level large page lookups */
+
+#define __HVM_PTE_PGMASK_4MB 0xffc00000
+#define __HVM_PTE_PGMASK_16MB 0xff000000
+
+/*
+ * "Big kernel page mappings" (see vm_init_segtable.S)
+ * are currently 16MB
+ */
+
+#define BIG_KERNEL_PAGE_SHIFT 24
+#define BIG_KERNEL_PAGE_SIZE (1 << BIG_KERNEL_PAGE_SHIFT)
+
+
+
+#endif /* _ASM_VM_MMU_H */
diff --git a/arch/hexagon/kernel/Makefile b/arch/hexagon/kernel/Makefile
new file mode 100644
index 0000000..3689f37
--- /dev/null
+++ b/arch/hexagon/kernel/Makefile
@@ -0,0 +1,18 @@
+extra-y := head.o vmlinux.lds init_task.o
+
+obj-$(CONFIG_SMP) += smp.o topology.o
+
+obj-y += setup.o irq_cpu.o traps.o syscalltab.o signal.o time.o
+obj-y += process.o syscall.o trampoline.o reset.o ptrace.o
+obj-y += vdso.o
+
+obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_MODULES) += module.o hexagon_ksyms.o
+
+# Modules required to work with the Hexagon Virtual Machine
+obj-y += vm_entry.o vm_events.o vm_switch.o vm_ops.o vm_init_segtable.o
+obj-y += vm_vectors.o
+
+obj-$(CONFIG_HAS_DMA) += dma.o
+
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
diff --git a/arch/hexagon/kernel/asm-offsets.c b/arch/hexagon/kernel/asm-offsets.c
new file mode 100644
index 0000000..89ffa51
--- /dev/null
+++ b/arch/hexagon/kernel/asm-offsets.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/compat.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/kbuild.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+
+/* This file is used to produce asm/linkerscript constants from header
+ files typically used in c. Specifically, it generates asm-offsets.h */
+
+int main(void)
+{
+ COMMENT("This is a comment.");
+ /* might get these from somewhere else. */
+ DEFINE(_PAGE_SIZE, PAGE_SIZE);
+ DEFINE(_PAGE_SHIFT, PAGE_SHIFT);
+ BLANK();
+
+ COMMENT("Hexagon pt_regs definitions");
+ OFFSET(_PT_SYSCALL_NR, pt_regs, syscall_nr);
+ OFFSET(_PT_UGPGP, pt_regs, ugpgp);
+ OFFSET(_PT_R3130, pt_regs, r3130);
+ OFFSET(_PT_R2928, pt_regs, r2928);
+ OFFSET(_PT_R2726, pt_regs, r2726);
+ OFFSET(_PT_R2524, pt_regs, r2524);
+ OFFSET(_PT_R2322, pt_regs, r2322);
+ OFFSET(_PT_R2120, pt_regs, r2120);
+ OFFSET(_PT_R1918, pt_regs, r1918);
+ OFFSET(_PT_R1716, pt_regs, r1716);
+ OFFSET(_PT_R1514, pt_regs, r1514);
+ OFFSET(_PT_R1312, pt_regs, r1312);
+ OFFSET(_PT_R1110, pt_regs, r1110);
+ OFFSET(_PT_R0908, pt_regs, r0908);
+ OFFSET(_PT_R0706, pt_regs, r0706);
+ OFFSET(_PT_R0504, pt_regs, r0504);
+ OFFSET(_PT_R0302, pt_regs, r0302);
+ OFFSET(_PT_R0100, pt_regs, r0100);
+ OFFSET(_PT_LC0SA0, pt_regs, lc0sa0);
+ OFFSET(_PT_LC1SA1, pt_regs, lc1sa1);
+ OFFSET(_PT_M1M0, pt_regs, m1m0);
+ OFFSET(_PT_PREDSUSR, pt_regs, predsusr);
+ OFFSET(_PT_EVREC, pt_regs, hvmer);
+ OFFSET(_PT_ER_VMEL, pt_regs, hvmer.vmel);
+ OFFSET(_PT_ER_VMEST, pt_regs, hvmer.vmest);
+ OFFSET(_PT_ER_VMPSP, pt_regs, hvmer.vmpsp);
+ OFFSET(_PT_ER_VMBADVA, pt_regs, hvmer.vmbadva);
+ DEFINE(_PT_REGS_SIZE, sizeof(struct pt_regs));
+ BLANK();
+
+ COMMENT("Hexagon thread_info definitions");
+ OFFSET(_THREAD_INFO_FLAGS, thread_info, flags);
+ OFFSET(_THREAD_INFO_PT_REGS, thread_info, regs);
+ OFFSET(_THREAD_INFO_SP, thread_info, sp);
+ DEFINE(_THREAD_SIZE, THREAD_SIZE);
+ BLANK();
+
+ COMMENT("Hexagon hexagon_switch_stack definitions");
+ OFFSET(_SWITCH_R1716, hexagon_switch_stack, r1716);
+ OFFSET(_SWITCH_R1918, hexagon_switch_stack, r1918);
+ OFFSET(_SWITCH_R2120, hexagon_switch_stack, r2120);
+ OFFSET(_SWITCH_R2322, hexagon_switch_stack, r2322);
+
+ OFFSET(_SWITCH_R2524, hexagon_switch_stack, r2524);
+ OFFSET(_SWITCH_R2726, hexagon_switch_stack, r2726);
+ OFFSET(_SWITCH_FP, hexagon_switch_stack, fp);
+ OFFSET(_SWITCH_LR, hexagon_switch_stack, lr);
+ DEFINE(_SWITCH_STACK_SIZE, sizeof(struct hexagon_switch_stack));
+ BLANK();
+
+ COMMENT("Hexagon task_struct definitions");
+ OFFSET(_TASK_THREAD_INFO, task_struct, stack);
+ OFFSET(_TASK_STRUCT_THREAD, task_struct, thread);
+
+ COMMENT("Hexagon thread_struct definitions");
+ OFFSET(_THREAD_STRUCT_SWITCH_SP, thread_struct, switch_sp);
+
+ return 0;
+}
diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c
new file mode 100644
index 0000000..e711ace
--- /dev/null
+++ b/arch/hexagon/kernel/dma.c
@@ -0,0 +1,220 @@
+/*
+ * DMA implementation for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/bootmem.h>
+#include <linux/genalloc.h>
+#include <asm/dma-mapping.h>
+
+struct dma_map_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
+int bad_dma_address; /* globals are automatically initialized to zero */
+
+int dma_supported(struct device *dev, u64 mask)
+{
+ if (mask == DMA_BIT_MASK(32))
+ return 1;
+ else
+ return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+
+ return 0;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+static struct gen_pool *coherent_pool;
+
+
+/* Allocates from a pool of uncached memory that was reserved at boot time */
+
+void *hexagon_dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_addr, gfp_t flag)
+{
+ void *ret;
+
+ if (coherent_pool == NULL) {
+ coherent_pool = gen_pool_create(PAGE_SHIFT, -1);
+
+ if (coherent_pool == NULL)
+ panic("Can't create %s() memory pool!", __func__);
+ else
+ gen_pool_add(coherent_pool,
+ (PAGE_OFFSET + (max_low_pfn << PAGE_SHIFT)),
+ hexagon_coherent_pool_size, -1);
+ }
+
+ ret = (void *) gen_pool_alloc(coherent_pool, size);
+
+ if (ret) {
+ memset(ret, 0, size);
+ *dma_addr = (dma_addr_t) (ret - PAGE_OFFSET);
+ } else
+ *dma_addr = ~0;
+
+ return ret;
+}
+
+static void hexagon_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_addr)
+{
+ gen_pool_free(coherent_pool, (unsigned long) vaddr, size);
+}
+
+static int check_addr(const char *name, struct device *hwdev,
+ dma_addr_t bus, size_t size)
+{
+ if (hwdev && hwdev->dma_mask && !dma_capable(hwdev, bus, size)) {
+ if (*hwdev->dma_mask >= DMA_BIT_MASK(32))
+ printk(KERN_ERR
+ "%s: overflow %Lx+%zu of device mask %Lx\n",
+ name, (long long)bus, size,
+ (long long)*hwdev->dma_mask);
+ return 0;
+ }
+ return 1;
+}
+
+static int hexagon_map_sg(struct device *hwdev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *s;
+ int i;
+
+ WARN_ON(nents == 0 || sg[0].length == 0);
+
+ for_each_sg(sg, s, nents, i) {
+ s->dma_address = sg_phys(s);
+ if (!check_addr("map_sg", hwdev, s->dma_address, s->length))
+ return 0;
+
+ s->dma_length = s->length;
+
+ flush_dcache_range(PAGE_OFFSET + s->dma_address,
+ PAGE_OFFSET + s->dma_address + s->length);
+ }
+
+ return nents;
+}
+
+/*
+ * address is virtual
+ */
+static inline void dma_sync(void *addr, size_t size,
+ enum dma_data_direction dir)
+{
+ switch (dir) {
+ case DMA_TO_DEVICE:
+ hexagon_clean_dcache_range((unsigned long) addr,
+ (unsigned long) addr + size);
+ break;
+ case DMA_FROM_DEVICE:
+ hexagon_inv_dcache_range((unsigned long) addr,
+ (unsigned long) addr + size);
+ break;
+ case DMA_BIDIRECTIONAL:
+ flush_dcache_range((unsigned long) addr,
+ (unsigned long) addr + size);
+ break;
+ default:
+ BUG();
+ }
+}
+
+static inline void *dma_addr_to_virt(dma_addr_t dma_addr)
+{
+ return phys_to_virt((unsigned long) dma_addr);
+}
+
+/**
+ * hexagon_map_page() - maps an address for device DMA
+ * @dev: pointer to DMA device
+ * @page: pointer to page struct of DMA memory
+ * @offset: offset within page
+ * @size: size of memory to map
+ * @dir: transfer direction
+ * @attrs: pointer to DMA attrs (not used)
+ *
+ * Called to map a memory address to a DMA address prior
+ * to accesses to/from device.
+ *
+ * We don't particularly have many hoops to jump through
+ * so far. Straight translation between phys and virtual.
+ *
+ * DMA is not cache coherent so sync is necessary; this
+ * seems to be a convenient place to do it.
+ *
+ */
+static dma_addr_t hexagon_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ dma_addr_t bus = page_to_phys(page) + offset;
+ WARN_ON(size == 0);
+
+ if (!check_addr("map_single", dev, bus, size))
+ return bad_dma_address;
+
+ dma_sync(dma_addr_to_virt(bus), size, dir);
+
+ return bus;
+}
+
+static void hexagon_sync_single_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync(dma_addr_to_virt(dma_handle), size, dir);
+}
+
+static void hexagon_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync(dma_addr_to_virt(dma_handle), size, dir);
+}
+
+struct dma_map_ops hexagon_dma_ops = {
+ .alloc_coherent = hexagon_dma_alloc_coherent,
+ .free_coherent = hexagon_free_coherent,
+ .map_sg = hexagon_map_sg,
+ .map_page = hexagon_map_page,
+ .sync_single_for_cpu = hexagon_sync_single_for_cpu,
+ .sync_single_for_device = hexagon_sync_single_for_device,
+ .is_phys = 1,
+};
+
+void __init hexagon_dma_init(void)
+{
+ if (dma_ops)
+ return;
+
+ dma_ops = &hexagon_dma_ops;
+}
diff --git a/arch/hexagon/kernel/head.S b/arch/hexagon/kernel/head.S
new file mode 100644
index 0000000..8e6b819
--- /dev/null
+++ b/arch/hexagon/kernel/head.S
@@ -0,0 +1,162 @@
+/*
+ * Early kernel startup code for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/mem-layout.h>
+#include <asm/vm_mmu.h>
+#include <asm/page.h>
+
+ __INIT
+ENTRY(stext)
+ /*
+ * VMM will already have set up true vector page, MMU, etc.
+ * To set up initial kernel identity map, we have to pass
+ * the VMM a pointer to some canonical page tables. In
+ * this implementation, we're assuming that we've got
+ * them precompiled. Generate value in R24, as we'll need
+ * it again shortly.
+ */
+ r24.L = #LO(swapper_pg_dir)
+ r24.H = #HI(swapper_pg_dir)
+
+ /*
+ * Symbol is kernel segment address, but we need
+ * the logical/physical address.
+ */
+ r24 = asl(r24, #2)
+ r24 = lsr(r24, #2)
+
+ r0 = r24
+
+ /*
+ * Initialize a 16MB PTE to make the virtual and physical
+ * addresses where the kernel was loaded be identical.
+ */
+#define PTE_BITS ( __HVM_PTE_R | __HVM_PTE_W | __HVM_PTE_X \
+ | __HEXAGON_C_WB_L2 << 6 \
+ | __HVM_PDE_S_4MB)
+
+ r1 = pc
+ r2.H = #0xffc0
+ r2.L = #0x0000
+ r1 = and(r1,r2) /* round PC to 4MB boundary */
+ r2 = lsr(r1, #22) /* 4MB page number */
+ r2 = asl(r2, #2) /* times sizeof(PTE) (4bytes) */
+ r0 = add(r0,r2) /* r0 = address of correct PTE */
+ r2 = #PTE_BITS
+ r1 = add(r1,r2) /* r1 = 4MB PTE for the first entry */
+ r2.h = #0x0040
+ r2.l = #0x0000 /* 4MB */
+ memw(r0 ++ #4) = r1
+ r1 = add(r1, r2)
+ memw(r0 ++ #4) = r1
+
+ r0 = r24
+
+ /*
+ * The subroutine wrapper around the virtual instruction touches
+ * no memory, so we should be able to use it even here.
+ */
+ call __vmnewmap;
+
+ /* Jump into virtual address range. */
+
+ r31.h = #hi(__head_s_vaddr_target)
+ r31.l = #lo(__head_s_vaddr_target)
+ jumpr r31
+
+ /* Insert trippy space effects. */
+
+__head_s_vaddr_target:
+ /*
+ * Tear down VA=PA translation now that we are running
+ * in the desgnated kernel segments.
+ */
+ r0 = #__HVM_PDE_S_INVALID
+ r1 = r24
+ loop0(1f,#0x100)
+1:
+ {
+ memw(R1 ++ #4) = R0
+ }:endloop0
+
+ r0 = r24
+ call __vmnewmap
+
+ /* Go ahead and install the trap0 return so angel calls work */
+ r0.h = #hi(_K_provisional_vec)
+ r0.l = #lo(_K_provisional_vec)
+ call __vmsetvec
+
+ /*
+ * OK, at this point we should start to be much more careful,
+ * we're going to enter C code and start touching memory
+ * in all sorts of places.
+ * This means:
+ * SGP needs to be OK
+ * Need to lock shared resources
+ * A bunch of other things that will cause
+ * all kinds of painful bugs
+ */
+
+ /*
+ * Stack pointer should be pointed at the init task's
+ * thread stack, which should have been declared in arch/init_task.c.
+ * So uhhhhh...
+ * It's accessible via the init_thread_union, which is a union
+ * of a thread_info struct and a stack; of course, the top
+ * of the stack is not for you. The end of the stack
+ * is simply init_thread_union + THREAD_SIZE.
+ */
+
+ {r29.H = #HI(init_thread_union); r0.H = #HI(_THREAD_SIZE); }
+ {r29.L = #LO(init_thread_union); r0.L = #LO(_THREAD_SIZE); }
+
+ /* initialize the register used to point to current_thread_info */
+ /* Fixme: THREADINFO_REG can't be R2 because of that memset thing. */
+ {r29 = add(r29,r0); THREADINFO_REG = r29; }
+
+ /* Hack: zero bss; */
+ { r0.L = #LO(__bss_start); r1 = #0; r2.l = #LO(__bss_stop); }
+ { r0.H = #HI(__bss_start); r2.h = #HI(__bss_stop); }
+
+ r2 = sub(r2,r0);
+ call memset;
+
+ /* Time to make the doughnuts. */
+ call start_kernel
+
+ /*
+ * Should not reach here.
+ */
+1:
+ jump 1b
+
+.p2align PAGE_SHIFT
+ENTRY(external_cmdline_buffer)
+ .fill _PAGE_SIZE,1,0
+
+.data
+.p2align PAGE_SHIFT
+ENTRY(empty_zero_page)
+ .fill _PAGE_SIZE,1,0
diff --git a/arch/hexagon/kernel/hexagon_ksyms.c b/arch/hexagon/kernel/hexagon_ksyms.c
new file mode 100644
index 0000000..7f18924
--- /dev/null
+++ b/arch/hexagon/kernel/hexagon_ksyms.c
@@ -0,0 +1,40 @@
+/*
+ * Export of symbols defined in assembly files and/or libgcc.
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <asm/hexagon_vm.h>
+#include <asm/uaccess.h>
+
+EXPORT_SYMBOL(__copy_from_user_hexagon);
+EXPORT_SYMBOL(__copy_to_user_hexagon);
+EXPORT_SYMBOL(__vmgetie);
+EXPORT_SYMBOL(__vmsetie);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+
+#define DECLARE_EXPORT(name) \
+ extern void name(void); EXPORT_SYMBOL(name)
+
+/* Symbols found in libgcc that assorted kernel modules need */
+DECLARE_EXPORT(__hexagon_memcpy_likely_aligned_min32bytes_mult8bytes);
+
+DECLARE_EXPORT(__hexagon_divsi3);
+DECLARE_EXPORT(__hexagon_modsi3);
+DECLARE_EXPORT(__hexagon_udivsi3);
+DECLARE_EXPORT(__hexagon_umodsi3);
diff --git a/arch/hexagon/kernel/init_task.c b/arch/hexagon/kernel/init_task.c
new file mode 100644
index 0000000..73283d3
--- /dev/null
+++ b/arch/hexagon/kernel/init_task.c
@@ -0,0 +1,54 @@
+/*
+ * Init task definition
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+#include <asm/thread_info.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by making sure
+ * the linker maps this in the .text segment right after head.S,
+ * and making head.S ensure the proper alignment.
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"),
+ __aligned__(THREAD_SIZE))) = {
+ INIT_THREAD_INFO(init_task)
+ };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/hexagon/kernel/irq_cpu.c b/arch/hexagon/kernel/irq_cpu.c
new file mode 100644
index 0000000..d4416a1
--- /dev/null
+++ b/arch/hexagon/kernel/irq_cpu.c
@@ -0,0 +1,90 @@
+/*
+ * First-level interrupt controller model for Hexagon.
+ *
+ * Copyright (c) 2010-2011 Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/hexagon_vm.h>
+
+static void mask_irq(struct irq_data *data)
+{
+ __vmintop_locdis((long) data->irq);
+}
+
+static void mask_irq_num(unsigned int irq)
+{
+ __vmintop_locdis((long) irq);
+}
+
+static void unmask_irq(struct irq_data *data)
+{
+ __vmintop_locen((long) data->irq);
+}
+
+/* This is actually all we need for handle_fasteoi_irq */
+static void eoi_irq(struct irq_data *data)
+{
+ __vmintop_globen((long) data->irq);
+}
+
+/* Power mamangement wake call. We don't need this, however,
+ * if this is absent, then an -ENXIO error is returned to the
+ * msm_serial driver, and it fails to correctly initialize.
+ * This is a bug in the msm_serial driver, but, for now, we
+ * work around it here, by providing this bogus handler.
+ * XXX FIXME!!! remove this when msm_serial is fixed.
+ */
+static int set_wake(struct irq_data *data, unsigned int on)
+{
+ return 0;
+}
+
+static struct irq_chip hexagon_irq_chip = {
+ .name = "HEXAGON",
+ .irq_mask = mask_irq,
+ .irq_unmask = unmask_irq,
+ .irq_set_wake = set_wake,
+ .irq_eoi = eoi_irq
+};
+
+/**
+ * The hexagon core comes with a first-level interrupt controller
+ * with 32 total possible interrupts. When the core is embedded
+ * into different systems/platforms, it is typically wrapped by
+ * macro cells that provide one or more second-level interrupt
+ * controllers that are cascaded into one or more of the first-level
+ * interrupts handled here. The precise wiring of these other
+ * irqs varies from platform to platform, and are set up & configured
+ * in the platform-specific files.
+ *
+ * The first-level interrupt controller is wrapped by the VM, which
+ * virtualizes the interrupt controller for us. It provides a very
+ * simple, fast & efficient API, and so the fasteoi handler is
+ * appropriate for this case.
+ */
+void __init init_IRQ(void)
+{
+ int irq;
+
+ for (irq = 0; irq < HEXAGON_CPUINTS; irq++) {
+ mask_irq_num(irq);
+ irq_set_chip_and_handler(irq, &hexagon_irq_chip,
+ handle_fasteoi_irq);
+ }
+}
diff --git a/arch/hexagon/kernel/kgdb.c b/arch/hexagon/kernel/kgdb.c
new file mode 100644
index 0000000..fe4aa1b
--- /dev/null
+++ b/arch/hexagon/kernel/kgdb.c
@@ -0,0 +1,254 @@
+/*
+ * arch/hexagon/kernel/kgdb.c - Hexagon KGDB Support
+ *
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kdebug.h>
+#include <linux/kgdb.h>
+
+/* All registers are 4 bytes, for now */
+#define GDB_SIZEOF_REG 4
+
+/* The register names are used during printing of the regs;
+ * Keep these at three letters to pretty-print. */
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
+ { " r0", GDB_SIZEOF_REG, offsetof(struct pt_regs, r00)},
+ { " r1", GDB_SIZEOF_REG, offsetof(struct pt_regs, r01)},
+ { " r2", GDB_SIZEOF_REG, offsetof(struct pt_regs, r02)},
+ { " r3", GDB_SIZEOF_REG, offsetof(struct pt_regs, r03)},
+ { " r4", GDB_SIZEOF_REG, offsetof(struct pt_regs, r04)},
+ { " r5", GDB_SIZEOF_REG, offsetof(struct pt_regs, r05)},
+ { " r6", GDB_SIZEOF_REG, offsetof(struct pt_regs, r06)},
+ { " r7", GDB_SIZEOF_REG, offsetof(struct pt_regs, r07)},
+ { " r8", GDB_SIZEOF_REG, offsetof(struct pt_regs, r08)},
+ { " r9", GDB_SIZEOF_REG, offsetof(struct pt_regs, r09)},
+ { "r10", GDB_SIZEOF_REG, offsetof(struct pt_regs, r10)},
+ { "r11", GDB_SIZEOF_REG, offsetof(struct pt_regs, r11)},
+ { "r12", GDB_SIZEOF_REG, offsetof(struct pt_regs, r12)},
+ { "r13", GDB_SIZEOF_REG, offsetof(struct pt_regs, r13)},
+ { "r14", GDB_SIZEOF_REG, offsetof(struct pt_regs, r14)},
+ { "r15", GDB_SIZEOF_REG, offsetof(struct pt_regs, r15)},
+ { "r16", GDB_SIZEOF_REG, offsetof(struct pt_regs, r16)},
+ { "r17", GDB_SIZEOF_REG, offsetof(struct pt_regs, r17)},
+ { "r18", GDB_SIZEOF_REG, offsetof(struct pt_regs, r18)},
+ { "r19", GDB_SIZEOF_REG, offsetof(struct pt_regs, r19)},
+ { "r20", GDB_SIZEOF_REG, offsetof(struct pt_regs, r20)},
+ { "r21", GDB_SIZEOF_REG, offsetof(struct pt_regs, r21)},
+ { "r22", GDB_SIZEOF_REG, offsetof(struct pt_regs, r22)},
+ { "r23", GDB_SIZEOF_REG, offsetof(struct pt_regs, r23)},
+ { "r24", GDB_SIZEOF_REG, offsetof(struct pt_regs, r24)},
+ { "r25", GDB_SIZEOF_REG, offsetof(struct pt_regs, r25)},
+ { "r26", GDB_SIZEOF_REG, offsetof(struct pt_regs, r26)},
+ { "r27", GDB_SIZEOF_REG, offsetof(struct pt_regs, r27)},
+ { "r28", GDB_SIZEOF_REG, offsetof(struct pt_regs, r28)},
+ { "r29", GDB_SIZEOF_REG, offsetof(struct pt_regs, r29)},
+ { "r30", GDB_SIZEOF_REG, offsetof(struct pt_regs, r30)},
+ { "r31", GDB_SIZEOF_REG, offsetof(struct pt_regs, r31)},
+
+ { "usr", GDB_SIZEOF_REG, offsetof(struct pt_regs, usr)},
+ { "preds", GDB_SIZEOF_REG, offsetof(struct pt_regs, preds)},
+ { " m0", GDB_SIZEOF_REG, offsetof(struct pt_regs, m0)},
+ { " m1", GDB_SIZEOF_REG, offsetof(struct pt_regs, m1)},
+ { "sa0", GDB_SIZEOF_REG, offsetof(struct pt_regs, sa0)},
+ { "sa1", GDB_SIZEOF_REG, offsetof(struct pt_regs, sa1)},
+ { "lc0", GDB_SIZEOF_REG, offsetof(struct pt_regs, lc0)},
+ { "lc1", GDB_SIZEOF_REG, offsetof(struct pt_regs, lc1)},
+ { " gp", GDB_SIZEOF_REG, offsetof(struct pt_regs, gp)},
+ { "ugp", GDB_SIZEOF_REG, offsetof(struct pt_regs, ugp)},
+ { "psp", GDB_SIZEOF_REG, offsetof(struct pt_regs, hvmer.vmpsp)},
+ { "elr", GDB_SIZEOF_REG, offsetof(struct pt_regs, hvmer.vmel)},
+ { "est", GDB_SIZEOF_REG, offsetof(struct pt_regs, hvmer.vmest)},
+ { "badva", GDB_SIZEOF_REG, offsetof(struct pt_regs, hvmer.vmbadva)},
+ { "restart_r0", GDB_SIZEOF_REG, offsetof(struct pt_regs, restart_r0)},
+ { "syscall_nr", GDB_SIZEOF_REG, offsetof(struct pt_regs, syscall_nr)},
+};
+
+struct kgdb_arch arch_kgdb_ops = {
+ /* trap0(#0xDB) 0x0cdb0054 */
+ .gdb_bpt_instr = {0x54, 0x00, 0xdb, 0x0c},
+};
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+ if (regno >= DBG_MAX_REG_NUM || regno < 0)
+ return NULL;
+
+ *((unsigned long *) mem) = *((unsigned long *) ((void *)regs +
+ dbg_reg_def[regno].offset));
+
+ return dbg_reg_def[regno].name;
+}
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+ if (regno >= DBG_MAX_REG_NUM || regno < 0)
+ return -EINVAL;
+
+ *((unsigned long *) ((void *)regs + dbg_reg_def[regno].offset)) =
+ *((unsigned long *) mem);
+
+ return 0;
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+ instruction_pointer(regs) = pc;
+}
+
+#ifdef CONFIG_SMP
+
+/**
+ * kgdb_roundup_cpus - Get other CPUs into a holding pattern
+ * @flags: Current IRQ state
+ *
+ * On SMP systems, we need to get the attention of the other CPUs
+ * and get them be in a known state. This should do what is needed
+ * to get the other CPUs to call kgdb_wait(). Note that on some arches,
+ * the NMI approach is not used for rounding up all the CPUs. For example,
+ * in case of MIPS, smp_call_function() is used to roundup CPUs. In
+ * this case, we have to make sure that interrupts are enabled before
+ * calling smp_call_function(). The argument to this function is
+ * the flags that will be used when restoring the interrupts. There is
+ * local_irq_save() call before kgdb_roundup_cpus().
+ *
+ * On non-SMP systems, this is not called.
+ */
+
+static void hexagon_kgdb_nmi_hook(void *ignored)
+{
+ kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+ local_irq_enable();
+ smp_call_function(hexagon_kgdb_nmi_hook, NULL, 0);
+ local_irq_disable();
+}
+#endif
+
+
+/* Not yet working */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs,
+ struct task_struct *task)
+{
+ struct pt_regs *thread_regs;
+
+ if (task == NULL)
+ return;
+
+ /* Initialize to zero */
+ memset(gdb_regs, 0, NUMREGBYTES);
+
+ /* Otherwise, we have only some registers from switch_to() */
+ thread_regs = task_pt_regs(task);
+ gdb_regs[0] = thread_regs->r00;
+}
+
+/**
+ * kgdb_arch_handle_exception - Handle architecture specific GDB packets.
+ * @vector: The error vector of the exception that happened.
+ * @signo: The signal number of the exception that happened.
+ * @err_code: The error code of the exception that happened.
+ * @remcom_in_buffer: The buffer of the packet we have read.
+ * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ * @regs: The &struct pt_regs of the current process.
+ *
+ * This function MUST handle the 'c' and 's' command packets,
+ * as well packets to set / remove a hardware breakpoint, if used.
+ * If there are additional packets which the hardware needs to handle,
+ * they are handled here. The code should return -1 if it wants to
+ * process more packets, and a %0 or %1 if it wants to exit from the
+ * kgdb callback.
+ *
+ * Not yet working.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+ char *remcom_in_buffer, char *remcom_out_buffer,
+ struct pt_regs *linux_regs)
+{
+ switch (remcom_in_buffer[0]) {
+ case 's':
+ case 'c':
+ return 0;
+ }
+ /* Stay in the debugger. */
+ return -1;
+}
+
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+ /* cpu roundup */
+ if (atomic_read(&kgdb_active) != -1) {
+ kgdb_nmicallback(smp_processor_id(), args->regs);
+ return NOTIFY_STOP;
+ }
+
+ if (user_mode(args->regs))
+ return NOTIFY_DONE;
+
+ if (kgdb_handle_exception(args->trapnr & 0xff, args->signr, args->err,
+ args->regs))
+ return NOTIFY_DONE;
+
+ return NOTIFY_STOP;
+}
+
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+ unsigned long flags;
+ int ret;
+
+ local_irq_save(flags);
+ ret = __kgdb_notify(ptr, cmd);
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+static struct notifier_block kgdb_notifier = {
+ .notifier_call = kgdb_notify,
+
+ /*
+ * Lowest-prio notifier priority, we want to be notified last:
+ */
+ .priority = -INT_MAX,
+};
+
+/**
+ * kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ * This function will handle the initalization of any architecture
+ * specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+ return register_die_notifier(&kgdb_notifier);
+}
+
+/**
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+ unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/hexagon/kernel/module.c b/arch/hexagon/kernel/module.c
new file mode 100644
index 0000000..61a76ba
--- /dev/null
+++ b/arch/hexagon/kernel/module.c
@@ -0,0 +1,162 @@
+/*
+ * Kernel module loader for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <asm/module.h>
+#include <linux/elf.h>
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/vmalloc.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt , ...)
+#endif
+
+/*
+ * module_frob_arch_sections - tweak got/plt sections.
+ * @hdr - pointer to elf header
+ * @sechdrs - pointer to elf load section headers
+ * @secstrings - symbol names
+ * @mod - pointer to module
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ unsigned int i;
+ int found = 0;
+
+ /* Look for .plt and/or .got.plt and/or .init.plt sections */
+ for (i = 0; i < hdr->e_shnum; i++) {
+ DEBUGP("Section %d is %s\n", i,
+ secstrings + sechdrs[i].sh_name);
+ if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
+ found = i+1;
+ if (strcmp(secstrings + sechdrs[i].sh_name, ".got.plt") == 0)
+ found = i+1;
+ if (strcmp(secstrings + sechdrs[i].sh_name, ".rela.plt") == 0)
+ found = i+1;
+ }
+
+ /* At this time, we don't support modules comiled with -shared */
+ if (found) {
+ printk(KERN_WARNING
+ "Module '%s' contains unexpected .plt/.got sections.\n",
+ mod->name);
+ /* return -ENOEXEC; */
+ }
+
+ return 0;
+}
+
+/*
+ * apply_relocate_add - perform rela relocations.
+ * @sechdrs - pointer to section headers
+ * @strtab - some sort of start address?
+ * @symindex - symbol index offset or something?
+ * @relsec - address to relocate to?
+ * @module - pointer to module
+ *
+ * Perform rela relocations.
+ */
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *module)
+{
+ unsigned int i;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ uint32_t value;
+ unsigned int nrelocs = sechdrs[relsec].sh_size / sizeof(Elf32_Rela);
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Word sym_info = sechdrs[relsec].sh_info;
+ Elf32_Sym *sym_base = (Elf32_Sym *) sechdrs[symindex].sh_addr;
+ void *loc_base = (void *) sechdrs[sym_info].sh_addr;
+
+ DEBUGP("Applying relocations in section %u to section %u base=%p\n",
+ relsec, sym_info, loc_base);
+
+ for (i = 0; i < nrelocs; i++) {
+
+ /* Symbol to relocate */
+ sym = sym_base + ELF32_R_SYM(rela[i].r_info);
+
+ /* Where to make the change */
+ location = loc_base + rela[i].r_offset;
+
+ /* `Everything is relative'. */
+ value = sym->st_value + rela[i].r_addend;
+
+ DEBUGP("%d: value=%08x loc=%p reloc=%d symbol=%s\n",
+ i, value, location, ELF32_R_TYPE(rela[i].r_info),
+ sym->st_name ?
+ &strtab[sym->st_name] : "(anonymous)");
+
+ switch (ELF32_R_TYPE(rela[i].r_info)) {
+ case R_HEXAGON_B22_PCREL: {
+ int dist = (int)(value - (uint32_t)location);
+ if ((dist < -0x00800000) ||
+ (dist >= 0x00800000)) {
+ printk(KERN_ERR
+ "%s: %s: %08x=%08x-%08x %s\n",
+ module->name,
+ "R_HEXAGON_B22_PCREL reloc out of range",
+ dist, value, (uint32_t)location,
+ sym->st_name ?
+ &strtab[sym->st_name] : "(anonymous)");
+ return -ENOEXEC;
+ }
+ DEBUGP("B22_PCREL contents: %08X.\n", *location);
+ *location &= ~0x01ff3fff;
+ *location |= 0x00003fff & dist;
+ *location |= 0x01ff0000 & (dist<<2);
+ DEBUGP("Contents after reloc: %08x\n", *location);
+ break;
+ }
+ case R_HEXAGON_HI16:
+ value = (value>>16) & 0xffff;
+ /* fallthrough */
+ case R_HEXAGON_LO16:
+ *location &= ~0x00c03fff;
+ *location |= value & 0x3fff;
+ *location |= (value & 0xc000) << 8;
+ break;
+ case R_HEXAGON_32:
+ *location = value;
+ break;
+ case R_HEXAGON_32_PCREL:
+ *location = value - (uint32_t)location;
+ break;
+ case R_HEXAGON_PLT_B22_PCREL:
+ case R_HEXAGON_GOTOFF_LO16:
+ case R_HEXAGON_GOTOFF_HI16:
+ printk(KERN_ERR "%s: GOT/PLT relocations unsupported\n",
+ module->name);
+ return -ENOEXEC;
+ default:
+ printk(KERN_ERR "%s: unknown relocation: %u\n",
+ module->name,
+ ELF32_R_TYPE(rela[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
new file mode 100644
index 0000000..18c4f0b
--- /dev/null
+++ b/arch/hexagon/kernel/process.c
@@ -0,0 +1,279 @@
+/*
+ * Process creation support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/tick.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+
+/*
+ * Kernel thread creation. The desired kernel function is "wrapped"
+ * in the kernel_thread_helper function, which does cleanup
+ * afterwards.
+ */
+static void __noreturn kernel_thread_helper(void *arg, int (*fn)(void *))
+{
+ do_exit(fn(arg));
+}
+
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(®s, 0, sizeof(regs));
+ /*
+ * Yes, we're exploting illicit knowledge of the ABI here.
+ */
+ regs.r00 = (unsigned long) arg;
+ regs.r01 = (unsigned long) fn;
+ pt_set_elr(®s, (unsigned long)kernel_thread_helper);
+ pt_set_kmode(®s);
+
+ return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+/*
+ * Program thread launch. Often defined as a macro in processor.h,
+ * but we're shooting for a small footprint and it's not an inner-loop
+ * performance-critical operation.
+ *
+ * The Hexagon ABI specifies that R28 is zero'ed before program launch,
+ * so that gets automatically done here. If we ever stop doing that here,
+ * we'll probably want to define the ELF_PLAT_INIT macro.
+ */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
+{
+ /* Set to run with user-mode data segmentation */
+ set_fs(USER_DS);
+ /* We want to zero all data-containing registers. Is this overkill? */
+ memset(regs, 0, sizeof(*regs));
+ /* We might want to also zero all Processor registers here */
+ pt_set_usermode(regs);
+ pt_set_elr(regs, pc);
+ pt_set_rte_sp(regs, sp);
+}
+
+/*
+ * Spin, or better still, do a hardware or VM wait instruction
+ * If hardware or VM offer wait termination even though interrupts
+ * are disabled.
+ */
+static void default_idle(void)
+{
+ __vmwait();
+}
+
+void (*idle_sleep)(void) = default_idle;
+
+void cpu_idle(void)
+{
+ while (1) {
+ tick_nohz_stop_sched_tick(1);
+ local_irq_disable();
+ while (!need_resched()) {
+ idle_sleep();
+ /* interrupts wake us up, but aren't serviced */
+ local_irq_enable(); /* service interrupt */
+ local_irq_disable();
+ }
+ local_irq_enable();
+ tick_nohz_restart_sched_tick();
+ schedule();
+ }
+}
+
+/*
+ * Return saved PC of a blocked thread
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return 0;
+}
+
+/*
+ * Copy architecture-specific thread state
+ */
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+ unsigned long unused, struct task_struct *p,
+ struct pt_regs *regs)
+{
+ struct thread_info *ti = task_thread_info(p);
+ struct hexagon_switch_stack *ss;
+ struct pt_regs *childregs;
+ asmlinkage void ret_from_fork(void);
+
+ childregs = (struct pt_regs *) (((unsigned long) ti + THREAD_SIZE) -
+ sizeof(*childregs));
+
+ memcpy(childregs, regs, sizeof(*childregs));
+ ti->regs = childregs;
+
+ /*
+ * Establish kernel stack pointer and initial PC for new thread
+ */
+ ss = (struct hexagon_switch_stack *) ((unsigned long) childregs -
+ sizeof(*ss));
+ ss->lr = (unsigned long)ret_from_fork;
+ p->thread.switch_sp = ss;
+
+ /* If User mode thread, set pt_reg stack pointer as per parameter */
+ if (user_mode(childregs)) {
+ pt_set_rte_sp(childregs, usp);
+
+ /* Child sees zero return value */
+ childregs->r00 = 0;
+
+ /*
+ * The clone syscall has the C signature:
+ * int [r0] clone(int flags [r0],
+ * void *child_frame [r1],
+ * void *parent_tid [r2],
+ * void *child_tid [r3],
+ * void *thread_control_block [r4]);
+ * ugp is used to provide TLS support.
+ */
+ if (clone_flags & CLONE_SETTLS)
+ childregs->ugp = childregs->r04;
+
+ /*
+ * Parent sees new pid -- not necessary, not even possible at
+ * this point in the fork process
+ * Might also want to set things like ti->addr_limit
+ */
+ } else {
+ /*
+ * If kernel thread, resume stack is kernel stack base.
+ * Note that this is pointer arithmetic on pt_regs *
+ */
+ pt_set_rte_sp(childregs, (unsigned long)(childregs + 1));
+ /*
+ * We need the current thread_info fast path pointer
+ * set up in pt_regs. The register to be used is
+ * parametric for assembler code, but the mechanism
+ * doesn't drop neatly into C. Needs to be fixed.
+ */
+ childregs->THREADINFO_REG = (unsigned long) ti;
+ }
+
+ /*
+ * thread_info pointer is pulled out of task_struct "stack"
+ * field on switch_to.
+ */
+ p->stack = (void *)ti;
+
+ return 0;
+}
+
+/*
+ * Release any architecture-specific resources locked by thread
+ */
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * Free any architecture-specific thread data structures, etc.
+ */
+void exit_thread(void)
+{
+}
+
+/*
+ * Some archs flush debug and FPU info here
+ */
+void flush_thread(void)
+{
+}
+
+/*
+ * The "wait channel" terminology is archaic, but what we want
+ * is an identification of the point at which the scheduler
+ * was invoked by a blocked thread.
+ */
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long fp, pc;
+ unsigned long stack_page;
+ int count = 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ stack_page = (unsigned long)task_stack_page(p);
+ fp = ((struct hexagon_switch_stack *)p->thread.switch_sp)->fp;
+ do {
+ if (fp < (stack_page + sizeof(struct thread_info)) ||
+ fp >= (THREAD_SIZE - 8 + stack_page))
+ return 0;
+ pc = ((unsigned long *)fp)[1];
+ if (!in_sched_functions(pc))
+ return pc;
+ fp = *(unsigned long *) fp;
+ } while (count++ < 16);
+
+ return 0;
+}
+
+/*
+ * Borrowed from PowerPC -- basically allow smaller kernel stacks if we
+ * go crazy with the page sizes.
+ */
+#if THREAD_SHIFT < PAGE_SHIFT
+
+static struct kmem_cache *thread_info_cache;
+
+struct thread_info *alloc_thread_info_node(struct task_struct *tsk, int node)
+{
+ struct thread_info *ti;
+
+ ti = kmem_cache_alloc_node(thread_info_cache, GFP_KERNEL, node);
+ if (unlikely(ti == NULL))
+ return NULL;
+#ifdef CONFIG_DEBUG_STACK_USAGE
+ memset(ti, 0, THREAD_SIZE);
+#endif
+ return ti;
+}
+
+void free_thread_info(struct thread_info *ti)
+{
+ kmem_cache_free(thread_info_cache, ti);
+}
+
+/* Weak symbol; called by init/main.c */
+
+void thread_info_cache_init(void)
+{
+ thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE,
+ THREAD_SIZE, 0, NULL);
+ BUG_ON(thread_info_cache == NULL);
+}
+
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+/*
+ * Required placeholder.
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+ return 0;
+}
diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c
new file mode 100644
index 0000000..bea3f08
--- /dev/null
+++ b/arch/hexagon/kernel/ptrace.c
@@ -0,0 +1,180 @@
+/*
+ * Ptrace support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <generated/compile.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/user.h>
+
+#include <asm/system.h>
+#include <asm/user.h>
+
+static int genregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int ret;
+ unsigned int dummy;
+ struct pt_regs *regs = task_pt_regs(target);
+
+
+ if (!regs)
+ return -EIO;
+
+ /* The general idea here is that the copyout must happen in
+ * exactly the same order in which the userspace expects these
+ * regs. Now, the sequence in userspace does not match the
+ * sequence in the kernel, so everything past the 32 gprs
+ * happens one at a time.
+ */
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ ®s->r00, 0, 32*sizeof(unsigned long));
+
+#define ONEXT(KPT_REG, USR_REG) \
+ if (!ret) \
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, \
+ KPT_REG, offsetof(struct user_regs_struct, USR_REG), \
+ offsetof(struct user_regs_struct, USR_REG) + \
+ sizeof(unsigned long));
+
+ /* Must be exactly same sequence as struct user_regs_struct */
+ ONEXT(®s->sa0, sa0);
+ ONEXT(®s->lc0, lc0);
+ ONEXT(®s->sa1, sa1);
+ ONEXT(®s->lc1, lc1);
+ ONEXT(®s->m0, m0);
+ ONEXT(®s->m1, m1);
+ ONEXT(®s->usr, usr);
+ ONEXT(®s->preds, p3_0);
+ ONEXT(®s->gp, gp);
+ ONEXT(®s->ugp, ugp);
+ ONEXT(&pt_elr(regs), pc);
+ dummy = pt_cause(regs);
+ ONEXT(&dummy, cause);
+ ONEXT(&pt_badva(regs), badva);
+
+ /* Pad the rest with zeros, if needed */
+ if (!ret)
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ offsetof(struct user_regs_struct, pad1), -1);
+ return ret;
+}
+
+static int genregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+ unsigned long bucket;
+ struct pt_regs *regs = task_pt_regs(target);
+
+ if (!regs)
+ return -EIO;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ ®s->r00, 0, 32*sizeof(unsigned long));
+
+#define INEXT(KPT_REG, USR_REG) \
+ if (!ret) \
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, \
+ KPT_REG, offsetof(struct user_regs_struct, USR_REG), \
+ offsetof(struct user_regs_struct, USR_REG) + \
+ sizeof(unsigned long));
+
+ /* Must be exactly same sequence as struct user_regs_struct */
+ INEXT(®s->sa0, sa0);
+ INEXT(®s->lc0, lc0);
+ INEXT(®s->sa1, sa1);
+ INEXT(®s->lc1, lc1);
+ INEXT(®s->m0, m0);
+ INEXT(®s->m1, m1);
+ INEXT(®s->usr, usr);
+ INEXT(®s->preds, p3_0);
+ INEXT(®s->gp, gp);
+ INEXT(®s->ugp, ugp);
+ INEXT(&pt_elr(regs), pc);
+
+ /* CAUSE and BADVA aren't writeable. */
+ INEXT(&bucket, cause);
+ INEXT(&bucket, badva);
+
+ /* Ignore the rest, if needed */
+ if (!ret)
+ ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+ offsetof(struct user_regs_struct, pad1), -1);
+
+ if (ret)
+ return ret;
+
+ /*
+ * This is special; SP is actually restored by the VM via the
+ * special event record which is set by the special trap.
+ */
+ regs->hvmer.vmpsp = regs->r29;
+ return 0;
+}
+
+enum hexagon_regset {
+ REGSET_GENERAL,
+};
+
+static const struct user_regset hexagon_regsets[] = {
+ [REGSET_GENERAL] = {
+ .core_note_type = NT_PRSTATUS,
+ .n = ELF_NGREG,
+ .size = sizeof(unsigned long),
+ .align = sizeof(unsigned long),
+ .get = genregs_get,
+ .set = genregs_set,
+ },
+};
+
+static const struct user_regset_view hexagon_user_view = {
+ .name = UTS_MACHINE,
+ .e_machine = ELF_ARCH,
+ .ei_osabi = ELF_OSABI,
+ .regsets = hexagon_regsets,
+ .n = ARRAY_SIZE(hexagon_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+ return &hexagon_user_view;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+ /* Boilerplate - resolves to null inline if no HW single-step */
+ user_disable_single_step(child);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data)
+{
+ return ptrace_request(child, request, addr, data);
+}
diff --git a/arch/hexagon/kernel/reset.c b/arch/hexagon/kernel/reset.c
new file mode 100644
index 0000000..4d72fc5
--- /dev/null
+++ b/arch/hexagon/kernel/reset.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/smp.h>
+#include <asm/hexagon_vm.h>
+
+void machine_power_off(void)
+{
+ smp_send_stop();
+ __vmstop();
+}
+
+void machine_halt(void)
+{
+}
+
+void machine_restart(char *cmd)
+{
+}
+
+void pm_power_off(void)
+{
+}
diff --git a/arch/hexagon/kernel/setup.c b/arch/hexagon/kernel/setup.c
new file mode 100644
index 0000000..1202f78
--- /dev/null
+++ b/arch/hexagon/kernel/setup.c
@@ -0,0 +1,145 @@
+/*
+ * Arch related setup for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/of_fdt.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/hexagon_vm.h>
+#include <asm/vm_mmu.h>
+#include <asm/time.h>
+#ifdef CONFIG_OF
+#include <asm/prom.h>
+#endif
+
+char cmd_line[COMMAND_LINE_SIZE];
+static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
+
+int on_simulator;
+
+void __cpuinit calibrate_delay(void)
+{
+ loops_per_jiffy = thread_freq_mhz * 1000000 / HZ;
+}
+
+/*
+ * setup_arch - high level architectural setup routine
+ * @cmdline_p: pointer to pointer to command-line arguments
+ */
+
+void __init setup_arch(char **cmdline_p)
+{
+ char *p = &external_cmdline_buffer;
+
+ /*
+ * These will eventually be pulled in via either some hypervisor
+ * or devicetree description. Hardwiring for now.
+ */
+ pcycle_freq_mhz = 600;
+ thread_freq_mhz = 100;
+ sleep_clk_freq = 32000;
+
+ /*
+ * Set up event bindings to handle exceptions and interrupts.
+ */
+ __vmsetvec(_K_VM_event_vector);
+
+ /*
+ * Simulator has a few differences from the hardware.
+ * For now, check uninitialized-but-mapped memory
+ * prior to invoking setup_arch_memory().
+ */
+ if (*(int *)((unsigned long)_end + 8) == 0x1f1f1f1f)
+ on_simulator = 1;
+ else
+ on_simulator = 0;
+
+ if (p[0] != '\0')
+ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
+ else
+ strlcpy(boot_command_line, default_command_line,
+ COMMAND_LINE_SIZE);
+
+ /*
+ * boot_command_line and the value set up by setup_arch
+ * are both picked up by the init code. If no reason to
+ * make them different, pass the same pointer back.
+ */
+ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = cmd_line;
+
+ parse_early_param();
+
+ setup_arch_memory();
+
+#ifdef CONFIG_SMP
+ smp_start_cpus();
+#endif
+}
+
+/*
+ * Functions for dumping CPU info via /proc
+ * Probably should move to kernel/proc.c or something.
+ */
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < nr_cpu_ids ? (void *)((unsigned long) *pos + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+/*
+ * Eventually this will dump information about
+ * CPU properties like ISA level, TLB size, etc.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ int cpu = (unsigned long) v - 1;
+
+ seq_printf(m, "processor\t: %d\n", cpu);
+ seq_printf(m, "model name\t: Hexagon Virtual Machine\n");
+ seq_printf(m, "BogoMips\t: %lu.%02lu\n",
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100);
+ seq_printf(m, "\n");
+ return 0;
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = &c_start,
+ .next = &c_next,
+ .stop = &c_stop,
+ .show = &show_cpuinfo,
+};
diff --git a/arch/hexagon/kernel/signal.c b/arch/hexagon/kernel/signal.c
new file mode 100644
index 0000000..b45be31
--- /dev/null
+++ b/arch/hexagon/kernel/signal.c
@@ -0,0 +1,345 @@
+/*
+ * Signal support for Hexagon processor
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <linux/syscalls.h>
+#include <linux/freezer.h>
+#include <linux/tracehook.h>
+#include <asm/registers.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <asm/uaccess.h>
+#include <asm/ucontext.h>
+#include <asm/cacheflush.h>
+#include <asm/signal.h>
+#include <asm/vdso.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+struct rt_sigframe {
+ unsigned long tramp[2];
+ struct siginfo info;
+ struct ucontext uc;
+};
+
+static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long sp = regs->r29;
+
+ /* Switch to signal stack if appropriate */
+ if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+
+ return (void __user *)((sp - frame_size) & ~(sizeof(long long) - 1));
+}
+
+static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+ unsigned long tmp;
+ int err = 0;
+
+ err |= copy_to_user(&sc->sc_regs.r0, ®s->r00,
+ 32*sizeof(unsigned long));
+
+ err |= __put_user(regs->sa0, &sc->sc_regs.sa0);
+ err |= __put_user(regs->lc0, &sc->sc_regs.lc0);
+ err |= __put_user(regs->sa1, &sc->sc_regs.sa1);
+ err |= __put_user(regs->lc1, &sc->sc_regs.lc1);
+ err |= __put_user(regs->m0, &sc->sc_regs.m0);
+ err |= __put_user(regs->m1, &sc->sc_regs.m1);
+ err |= __put_user(regs->usr, &sc->sc_regs.usr);
+ err |= __put_user(regs->preds, &sc->sc_regs.p3_0);
+ err |= __put_user(regs->gp, &sc->sc_regs.gp);
+ err |= __put_user(regs->ugp, &sc->sc_regs.ugp);
+
+ tmp = pt_elr(regs); err |= __put_user(tmp, &sc->sc_regs.pc);
+ tmp = pt_cause(regs); err |= __put_user(tmp, &sc->sc_regs.cause);
+ tmp = pt_badva(regs); err |= __put_user(tmp, &sc->sc_regs.badva);
+
+ return err;
+}
+
+static int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc)
+{
+ unsigned long tmp;
+ int err = 0;
+
+ err |= copy_from_user(®s->r00, &sc->sc_regs.r0,
+ 32 * sizeof(unsigned long));
+
+ err |= __get_user(regs->sa0, &sc->sc_regs.sa0);
+ err |= __get_user(regs->lc0, &sc->sc_regs.lc0);
+ err |= __get_user(regs->sa1, &sc->sc_regs.sa1);
+ err |= __get_user(regs->lc1, &sc->sc_regs.lc1);
+ err |= __get_user(regs->m0, &sc->sc_regs.m0);
+ err |= __get_user(regs->m1, &sc->sc_regs.m1);
+ err |= __get_user(regs->usr, &sc->sc_regs.usr);
+ err |= __get_user(regs->preds, &sc->sc_regs.p3_0);
+ err |= __get_user(regs->gp, &sc->sc_regs.gp);
+ err |= __get_user(regs->ugp, &sc->sc_regs.ugp);
+
+ err |= __get_user(tmp, &sc->sc_regs.pc); pt_set_elr(regs, tmp);
+
+ return err;
+}
+
+/*
+ * Setup signal stack frame with siginfo structure
+ */
+static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ int err = 0;
+ struct rt_sigframe __user *frame;
+ struct hexagon_vdso *vdso = current->mm->context.vdso;
+
+ frame = get_sigframe(ka, regs, sizeof(struct rt_sigframe));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(struct rt_sigframe)))
+ goto sigsegv;
+
+ if (copy_siginfo_to_user(&frame->info, info))
+ goto sigsegv;
+
+ /* The on-stack signal trampoline is no longer executed;
+ * however, the libgcc signal frame unwinding code checks for
+ * the presence of these two numeric magic values.
+ */
+ err |= __put_user(0x7800d166, &frame->tramp[0]);
+ err |= __put_user(0x5400c004, &frame->tramp[1]);
+ err |= setup_sigcontext(regs, &frame->uc.uc_mcontext);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ goto sigsegv;
+
+ /* Load r0/r1 pair with signumber/siginfo pointer... */
+ regs->r0100 = ((unsigned long long)((unsigned long)&frame->info) << 32)
+ | (unsigned long long)signr;
+ regs->r02 = (unsigned long) &frame->uc;
+ regs->r31 = (unsigned long) vdso->rt_signal_trampoline;
+ pt_psp(regs) = (unsigned long) frame;
+ pt_set_elr(regs, (unsigned long)ka->sa.sa_handler);
+
+ return 0;
+
+sigsegv:
+ force_sigsegv(signr, current);
+ return -EFAULT;
+}
+
+/*
+ * Setup invocation of signal handler
+ */
+static int handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs *regs)
+{
+ int rc;
+
+ /*
+ * If we're handling a signal that aborted a system call,
+ * set up the error return value before adding the signal
+ * frame to the stack.
+ */
+
+ if (regs->syscall_nr >= 0) {
+ switch (regs->r00) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->r00 = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->r00 = -EINTR;
+ break;
+ }
+ /* Fall through */
+ case -ERESTARTNOINTR:
+ regs->r06 = regs->syscall_nr;
+ pt_set_elr(regs, pt_elr(regs) - 4);
+ regs->r00 = regs->restart_r0;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /*
+ * Set up the stack frame; not doing the SA_SIGINFO thing. We
+ * only set up the rt_frame flavor.
+ */
+ rc = setup_rt_frame(sig, ka, info, oldset, regs);
+
+ /* If there was an error on setup, no signal was delivered. */
+ if (rc)
+ return rc;
+
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ return 0;
+}
+
+/*
+ * Called from return-from-event code.
+ */
+static void do_signal(struct pt_regs *regs)
+{
+ struct k_sigaction sigact;
+ siginfo_t info;
+ int signo;
+
+ if (!user_mode(regs))
+ return;
+
+ if (try_to_freeze())
+ goto no_signal;
+
+ signo = get_signal_to_deliver(&info, &sigact, regs, NULL);
+
+ if (signo > 0) {
+ sigset_t *oldset;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
+ oldset = ¤t->blocked;
+
+ if (handle_signal(signo, &info, &sigact, oldset, regs) == 0) {
+ /*
+ * Successful delivery case. The saved sigmask is
+ * stored in the signal frame, and will be restored
+ * by sigreturn. We can clear the TIF flag.
+ */
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+ tracehook_signal_handler(signo, &info, &sigact, regs,
+ test_thread_flag(TIF_SINGLESTEP));
+ }
+ return;
+ }
+
+no_signal:
+ /*
+ * If we came from a system call, handle the restart.
+ */
+ if (regs->syscall_nr >= 0) {
+ switch (regs->r00) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->r06 = regs->syscall_nr;
+ break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->r06 = __NR_restart_syscall;
+ break;
+ default:
+ goto no_restart;
+ }
+ pt_set_elr(regs, pt_elr(regs) - 4);
+ regs->r00 = regs->restart_r0;
+ }
+
+no_restart:
+ /* If there's no signal to deliver, put the saved sigmask back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+}
+
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
+}
+
+/*
+ * Architecture-specific wrappers for signal-related system calls
+ */
+asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+{
+ struct pt_regs *regs = current_thread_info()->regs;
+
+ return do_sigaltstack(uss, uoss, regs->r29);
+}
+
+asmlinkage int sys_rt_sigreturn(void)
+{
+ struct pt_regs *regs = current_thread_info()->regs;
+ struct rt_sigframe __user *frame;
+ sigset_t blocked;
+
+ frame = (struct rt_sigframe __user *)pt_psp(regs);
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&blocked, &frame->uc.uc_sigmask, sizeof(blocked)))
+ goto badframe;
+
+ sigdelsetmask(&blocked, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = blocked;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+ goto badframe;
+
+ /* Restore the user's stack as well */
+ pt_psp(regs) = regs->r29;
+
+ /*
+ * Leave a trace in the stack frame that this was a sigreturn.
+ * If the system call is to replay, we've already restored the
+ * number in the GPR slot and it will be regenerated on the
+ * new system call trap entry. Note that if restore_sigcontext()
+ * did something other than a bulk copy of the pt_regs struct,
+ * we could avoid this assignment by simply not overwriting
+ * regs->syscall_nr.
+ */
+ regs->syscall_nr = __NR_rt_sigreturn;
+
+ /*
+ * If we were meticulous, we'd only call this if we knew that
+ * we were actually going to use an alternate stack, and we'd
+ * consider any error to be fatal. What we do here, in common
+ * with many other architectures, is call it blindly and only
+ * consider the -EFAULT return case to be proof of a problem.
+ */
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, pt_psp(regs)) == -EFAULT)
+ goto badframe;
+
+ return 0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c
new file mode 100644
index 0000000..c871a2c
--- /dev/null
+++ b/arch/hexagon/kernel/smp.c
@@ -0,0 +1,276 @@
+/*
+ * SMP support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h> /* xchg */
+#include <asm/time.h> /* timer_interrupt */
+#include <asm/hexagon_vm.h>
+
+#define BASE_IPI_IRQ 26
+
+/*
+ * cpu_possible_map needs to be filled out prior to setup_per_cpu_areas
+ * (which is prior to any of our smp_prepare_cpu crap), in order to set
+ * up the... per_cpu areas.
+ */
+
+struct ipi_data {
+ unsigned long bits;
+};
+
+static DEFINE_PER_CPU(struct ipi_data, ipi_data);
+
+static inline void __handle_ipi(unsigned long *ops, struct ipi_data *ipi,
+ int cpu)
+{
+ unsigned long msg = 0;
+ do {
+ msg = find_next_bit(ops, BITS_PER_LONG, msg+1);
+
+ switch (msg) {
+
+ case IPI_TIMER:
+ ipi_timer();
+ break;
+
+ case IPI_CALL_FUNC:
+ generic_smp_call_function_interrupt();
+ break;
+
+ case IPI_CALL_FUNC_SINGLE:
+ generic_smp_call_function_single_interrupt();
+ break;
+
+ case IPI_CPU_STOP:
+ /*
+ * call vmstop()
+ */
+ __vmstop();
+ break;
+
+ case IPI_RESCHEDULE:
+ scheduler_ipi();
+ break;
+ }
+ } while (msg < BITS_PER_LONG);
+}
+
+/* Used for IPI call from other CPU's to unmask int */
+void smp_vm_unmask_irq(void *info)
+{
+ __vmintop_locen((long) info);
+}
+
+
+/*
+ * This is based on Alpha's IPI stuff.
+ * Supposed to take (int, void*) as args now.
+ * Specifically, first arg is irq, second is the irq_desc.
+ */
+
+irqreturn_t handle_ipi(int irq, void *desc)
+{
+ int cpu = smp_processor_id();
+ struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
+ unsigned long ops;
+
+ while ((ops = xchg(&ipi->bits, 0)) != 0)
+ __handle_ipi(&ops, ipi, cpu);
+ return IRQ_HANDLED;
+}
+
+void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
+{
+ unsigned long flags;
+ unsigned long cpu;
+ unsigned long retval;
+
+ local_irq_save(flags);
+
+ for_each_cpu(cpu, cpumask) {
+ struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
+
+ set_bit(msg, &ipi->bits);
+ /* Possible barrier here */
+ retval = __vmintop_post(BASE_IPI_IRQ+cpu);
+
+ if (retval != 0) {
+ printk(KERN_ERR "interrupt %ld not configured?\n",
+ BASE_IPI_IRQ+cpu);
+ }
+ }
+
+ local_irq_restore(flags);
+}
+
+static struct irqaction ipi_intdesc = {
+ .handler = handle_ipi,
+ .flags = IRQF_TRIGGER_RISING,
+ .name = "ipi_handler"
+};
+
+void __init smp_prepare_boot_cpu(void)
+{
+}
+
+/*
+ * interrupts should already be disabled from the VM
+ * SP should already be correct; need to set THREADINFO_REG
+ * to point to current thread info
+ */
+
+void __cpuinit start_secondary(void)
+{
+ unsigned int cpu;
+ unsigned long thread_ptr;
+
+ /* Calculate thread_info pointer from stack pointer */
+ __asm__ __volatile__(
+ "%0 = SP;\n"
+ : "=r" (thread_ptr)
+ );
+
+ thread_ptr = thread_ptr & ~(THREAD_SIZE-1);
+
+ __asm__ __volatile__(
+ QUOTED_THREADINFO_REG " = %0;\n"
+ :
+ : "r" (thread_ptr)
+ );
+
+ /* Set the memory struct */
+ atomic_inc(&init_mm.mm_count);
+ current->active_mm = &init_mm;
+
+ cpu = smp_processor_id();
+
+ setup_irq(BASE_IPI_IRQ + cpu, &ipi_intdesc);
+
+ /* Register the clock_event dummy */
+ setup_percpu_clockdev();
+
+ printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu);
+
+ set_cpu_online(cpu, true);
+ while (!cpumask_test_cpu(cpu, cpu_active_mask))
+ cpu_relax();
+ local_irq_enable();
+
+ cpu_idle();
+}
+
+
+/*
+ * called once for each present cpu
+ * apparently starts up the CPU and then
+ * maintains control until "cpu_online(cpu)" is set.
+ */
+
+int __cpuinit __cpu_up(unsigned int cpu)
+{
+ struct task_struct *idle;
+ struct thread_info *thread;
+ void *stack_start;
+
+ /* Create new init task for the CPU */
+ idle = fork_idle(cpu);
+ if (IS_ERR(idle))
+ panic(KERN_ERR "fork_idle failed\n");
+
+ thread = (struct thread_info *)idle->stack;
+ thread->cpu = cpu;
+
+ /* Boot to the head. */
+ stack_start = ((void *) thread) + THREAD_SIZE;
+ __vmstart(start_secondary, stack_start);
+
+ while (!cpu_isset(cpu, cpu_online_map))
+ barrier();
+
+ return 0;
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ /*
+ * should eventually have some sort of machine
+ * descriptor that has this stuff
+ */
+
+ /* Right now, let's just fake it. */
+ for (i = 0; i < max_cpus; i++)
+ cpu_set(i, cpu_present_map);
+
+ /* Also need to register the interrupts for IPI */
+ if (max_cpus > 1)
+ setup_irq(BASE_IPI_IRQ, &ipi_intdesc);
+}
+
+void smp_send_reschedule(int cpu)
+{
+ send_ipi(cpumask_of(cpu), IPI_RESCHEDULE);
+}
+
+void smp_send_stop(void)
+{
+ struct cpumask targets;
+ cpumask_copy(&targets, cpu_online_mask);
+ cpumask_clear_cpu(smp_processor_id(), &targets);
+ send_ipi(&targets, IPI_CPU_STOP);
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+ send_ipi(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+ send_ipi(mask, IPI_CALL_FUNC);
+}
+
+int setup_profiling_timer(unsigned int multiplier)
+{
+ return -EINVAL;
+}
+
+void smp_start_cpus(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; i++)
+ cpu_set(i, cpu_possible_map);
+}
diff --git a/arch/hexagon/kernel/stacktrace.c b/arch/hexagon/kernel/stacktrace.c
new file mode 100644
index 0000000..11c597b
--- /dev/null
+++ b/arch/hexagon/kernel/stacktrace.c
@@ -0,0 +1,66 @@
+/*
+ * Stacktrace support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/module.h>
+
+register unsigned long current_frame_pointer asm("r30");
+
+struct stackframe {
+ unsigned long fp;
+ unsigned long rets;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+ unsigned long low, high;
+ unsigned long fp;
+ struct stackframe *frame;
+ int skip = trace->skip;
+
+ low = (unsigned long)task_stack_page(current);
+ high = low + THREAD_SIZE;
+ fp = current_frame_pointer;
+
+ while (fp >= low && fp <= (high - sizeof(*frame))) {
+ frame = (struct stackframe *)fp;
+
+ if (skip) {
+ skip--;
+ } else {
+ trace->entries[trace->nr_entries++] = frame->rets;
+ if (trace->nr_entries >= trace->max_entries)
+ break;
+ }
+
+ /*
+ * The next frame must be at a higher address than the
+ * current frame.
+ */
+ low = fp + sizeof(*frame);
+ fp = frame->fp;
+ }
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/hexagon/kernel/syscall.c b/arch/hexagon/kernel/syscall.c
new file mode 100644
index 0000000..620dd18
--- /dev/null
+++ b/arch/hexagon/kernel/syscall.c
@@ -0,0 +1,90 @@
+/*
+ * Hexagon system calls
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/linkage.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <linux/unistd.h>
+#include <asm/mman.h>
+#include <asm/registers.h>
+
+/*
+ * System calls with architecture-specific wrappers.
+ * See signal.c for signal-related system call wrappers.
+ */
+
+asmlinkage int sys_execve(char __user *ufilename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp)
+{
+ struct pt_regs *pregs = current_thread_info()->regs;
+ char *filename;
+ int retval;
+
+ filename = getname(ufilename);
+ retval = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ return retval;
+
+ retval = do_execve(filename, argv, envp, pregs);
+ putname(filename);
+
+ return retval;
+}
+
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+ unsigned long parent_tidp, unsigned long child_tidp)
+{
+ struct pt_regs *pregs = current_thread_info()->regs;
+
+ if (!newsp)
+ newsp = pregs->SP;
+ return do_fork(clone_flags, newsp, pregs, 0, (int __user *)parent_tidp,
+ (int __user *)child_tidp);
+}
+
+/*
+ * Do a system call from the kernel, so as to have a proper pt_regs
+ * and recycle the sys_execvpe infrustructure.
+ */
+int kernel_execve(const char *filename,
+ const char *const argv[], const char *const envp[])
+{
+ register unsigned long __a0 asm("r0") = (unsigned long) filename;
+ register unsigned long __a1 asm("r1") = (unsigned long) argv;
+ register unsigned long __a2 asm("r2") = (unsigned long) envp;
+ int retval;
+
+ __asm__ volatile(
+ " R6 = #%4;\n"
+ " trap0(#1);\n"
+ " %0 = R0;\n"
+ : "=r" (retval)
+ : "r" (__a0), "r" (__a1), "r" (__a2), "i" (__NR_execve)
+ );
+
+ return retval;
+}
+EXPORT_SYMBOL(kernel_execve);
diff --git a/arch/hexagon/kernel/syscalltab.c b/arch/hexagon/kernel/syscalltab.c
new file mode 100644
index 0000000..c550f41
--- /dev/null
+++ b/arch/hexagon/kernel/syscalltab.c
@@ -0,0 +1,32 @@
+/*
+ * System call table for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#include <asm/syscall.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+void *sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c
new file mode 100644
index 0000000..6bee15c
--- /dev/null
+++ b/arch/hexagon/kernel/time.c
@@ -0,0 +1,250 @@
+/*
+ * Time related functions for Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/timer-regs.h>
+#include <asm/hexagon_vm.h>
+
+/*
+ * For the clocksource we need:
+ * pcycle frequency (600MHz)
+ * For the loops_per_jiffy we need:
+ * thread/cpu frequency (100MHz)
+ * And for the timer, we need:
+ * sleep clock rate
+ */
+
+cycles_t pcycle_freq_mhz;
+cycles_t thread_freq_mhz;
+cycles_t sleep_clk_freq;
+
+static struct resource rtos_timer_resources[] = {
+ {
+ .start = RTOS_TIMER_REGS_ADDR,
+ .end = RTOS_TIMER_REGS_ADDR+PAGE_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device rtos_timer_device = {
+ .name = "rtos_timer",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtos_timer_resources),
+ .resource = rtos_timer_resources,
+};
+
+/* A lot of this stuff should move into a platform specific section. */
+struct adsp_hw_timer_struct {
+ u32 match; /* Match value */
+ u32 count;
+ u32 enable; /* [1] - CLR_ON_MATCH_EN, [0] - EN */
+ u32 clear; /* one-shot register that clears the count */
+};
+
+/* Look for "TCX0" for related constants. */
+static __iomem struct adsp_hw_timer_struct *rtos_timer;
+
+static cycle_t timer_get_cycles(struct clocksource *cs)
+{
+ return (cycle_t) __vmgettime();
+}
+
+static struct clocksource hexagon_clocksource = {
+ .name = "pcycles",
+ .rating = 250,
+ .read = timer_get_cycles,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int set_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+ /* Assuming the timer will be disabled when we enter here. */
+
+ iowrite32(1, &rtos_timer->clear);
+ iowrite32(0, &rtos_timer->clear);
+
+ iowrite32(delta, &rtos_timer->match);
+ iowrite32(1 << TIMER_ENABLE, &rtos_timer->enable);
+ return 0;
+}
+
+/*
+ * Sets the mode (periodic, shutdown, oneshot, etc) of a timer.
+ */
+static void set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* XXX implement me */
+ default:
+ break;
+ }
+}
+
+#ifdef CONFIG_SMP
+/* Broadcast mechanism */
+static void broadcast(const struct cpumask *mask)
+{
+ send_ipi(mask, IPI_TIMER);
+}
+#endif
+
+static struct clock_event_device hexagon_clockevent_dev = {
+ .name = "clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 400,
+ .irq = RTOS_TIMER_INT,
+ .set_next_event = set_next_event,
+ .set_mode = set_mode,
+#ifdef CONFIG_SMP
+ .broadcast = broadcast,
+#endif
+};
+
+#ifdef CONFIG_SMP
+static DEFINE_PER_CPU(struct clock_event_device, clock_events);
+
+void setup_percpu_clockdev(void)
+{
+ int cpu = smp_processor_id();
+ struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
+ struct clock_event_device *dummy_clock_dev =
+ &per_cpu(clock_events, cpu);
+
+ memcpy(dummy_clock_dev, ce_dev, sizeof(*dummy_clock_dev));
+ INIT_LIST_HEAD(&dummy_clock_dev->list);
+
+ dummy_clock_dev->features = CLOCK_EVT_FEAT_DUMMY;
+ dummy_clock_dev->cpumask = cpumask_of(cpu);
+ dummy_clock_dev->mode = CLOCK_EVT_MODE_UNUSED;
+
+ clockevents_register_device(dummy_clock_dev);
+}
+
+/* Called from smp.c for each CPU's timer ipi call */
+void ipi_timer(void)
+{
+ int cpu = smp_processor_id();
+ struct clock_event_device *ce_dev = &per_cpu(clock_events, cpu);
+
+ ce_dev->event_handler(ce_dev);
+}
+#endif /* CONFIG_SMP */
+
+static irqreturn_t timer_interrupt(int irq, void *devid)
+{
+ struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
+
+ iowrite32(0, &rtos_timer->enable);
+ ce_dev->event_handler(ce_dev);
+
+ return IRQ_HANDLED;
+}
+
+/* This should also be pulled from devtree */
+static struct irqaction rtos_timer_intdesc = {
+ .handler = timer_interrupt,
+ .flags = IRQF_TIMER | IRQF_TRIGGER_RISING,
+ .name = "rtos_timer"
+};
+
+/*
+ * time_init_deferred - called by start_kernel to set up timer/clock source
+ *
+ * Install the IRQ handler for the clock, setup timers.
+ * This is done late, as that way, we can use ioremap().
+ *
+ * This runs just before the delay loop is calibrated, and
+ * is used for delay calibration.
+ */
+void __init time_init_deferred(void)
+{
+ struct resource *resource = NULL;
+ struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
+ struct device_node *dn;
+ struct resource r;
+ int err;
+
+ ce_dev->cpumask = cpu_all_mask;
+
+ if (!resource)
+ resource = rtos_timer_device.resource;
+
+ /* ioremap here means this has to run later, after paging init */
+ rtos_timer = ioremap(resource->start, resource->end
+ - resource->start + 1);
+
+ if (!rtos_timer) {
+ release_mem_region(resource->start, resource->end
+ - resource->start + 1);
+ }
+ clocksource_register_khz(&hexagon_clocksource, pcycle_freq_mhz * 1000);
+
+ /* Note: the sim generic RTOS clock is apparently really 18750Hz */
+
+ /*
+ * Last arg is some guaranteed seconds for which the conversion will
+ * work without overflow.
+ */
+ clockevents_calc_mult_shift(ce_dev, sleep_clk_freq, 4);
+
+ ce_dev->max_delta_ns = clockevent_delta2ns(0x7fffffff, ce_dev);
+ ce_dev->min_delta_ns = clockevent_delta2ns(0xf, ce_dev);
+
+#ifdef CONFIG_SMP
+ setup_percpu_clockdev();
+#endif
+
+ clockevents_register_device(ce_dev);
+ setup_irq(ce_dev->irq, &rtos_timer_intdesc);
+}
+
+void __init time_init(void)
+{
+ late_time_init = time_init_deferred;
+}
+
+/*
+ * This could become parametric or perhaps even computed at run-time,
+ * but for now we take the observed simulator jitter.
+ */
+static long long fudgefactor = 350; /* Maybe lower if kernel optimized. */
+
+void __udelay(unsigned long usecs)
+{
+ unsigned long long start = __vmgettime();
+ unsigned long long finish = (pcycle_freq_mhz * usecs) - fudgefactor;
+
+ while ((__vmgettime() - start) < finish)
+ cpu_relax(); /* not sure how this improves readability */
+}
+EXPORT_SYMBOL(__udelay);
diff --git a/arch/hexagon/kernel/topology.c b/arch/hexagon/kernel/topology.c
new file mode 100644
index 0000000..ba44751
--- /dev/null
+++ b/arch/hexagon/kernel/topology.c
@@ -0,0 +1,52 @@
+/*
+ * CPU topology for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
+#include <linux/percpu.h>
+
+/* Swiped from MIPS. */
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+static int __init topology_init(void)
+{
+ int i, ret;
+
+ for_each_present_cpu(i) {
+
+ /*
+ * register_cpu takes a per_cpu pointer and
+ * just points it at another per_cpu struct...
+ */
+
+ ret = register_cpu(&per_cpu(cpu_devices, i), i);
+ if (ret)
+ printk(KERN_WARNING "topology_init: register_cpu %d "
+ "failed (%d)\n", i, ret);
+ }
+
+ return 0;
+}
+
+subsys_initcall(topology_init);
diff --git a/arch/hexagon/kernel/trampoline.S b/arch/hexagon/kernel/trampoline.S
new file mode 100644
index 0000000..06c36c0
--- /dev/null
+++ b/arch/hexagon/kernel/trampoline.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * Trampoline sequences to be copied onto user stack.
+ * This consumes a little more space than hand-assembling
+ * immediate constants for use in C, but is more portable
+ * to future tweaks to the Hexagon instruction set.
+ */
+
+#include <asm/unistd.h>
+
+/* Sig trampolines - call sys_sigreturn or sys_rt_sigreturn as appropriate */
+
+/* plain sigreturn is gone. */
+
+ .globl __rt_sigtramp_template
+__rt_sigtramp_template:
+ r6 = #__NR_rt_sigreturn;
+ trap0(#1);
diff --git a/arch/hexagon/kernel/traps.c b/arch/hexagon/kernel/traps.c
new file mode 100644
index 0000000..f08857d
--- /dev/null
+++ b/arch/hexagon/kernel/traps.c
@@ -0,0 +1,454 @@
+/*
+ * Kernel traps/events for Hexagon processor
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/kdebug.h>
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/tracehook.h>
+#include <asm/traps.h>
+#include <asm/vm_fault.h>
+#include <asm/syscall.h>
+#include <asm/registers.h>
+#include <asm/unistd.h>
+#include <asm/sections.h>
+#ifdef CONFIG_KGDB
+# include <linux/kgdb.h>
+#endif
+
+#define TRAP_SYSCALL 1
+#define TRAP_DEBUG 0xdb
+
+void __init trap_init(void)
+{
+}
+
+#ifdef CONFIG_GENERIC_BUG
+/* Maybe should resemble arch/sh/kernel/traps.c ?? */
+int is_valid_bugaddr(unsigned long addr)
+{
+ return 1;
+}
+#endif /* CONFIG_GENERIC_BUG */
+
+static const char *ex_name(int ex)
+{
+ switch (ex) {
+ case HVM_GE_C_XPROT:
+ case HVM_GE_C_XUSER:
+ return "Execute protection fault";
+ case HVM_GE_C_RPROT:
+ case HVM_GE_C_RUSER:
+ return "Read protection fault";
+ case HVM_GE_C_WPROT:
+ case HVM_GE_C_WUSER:
+ return "Write protection fault";
+ case HVM_GE_C_XMAL:
+ return "Misaligned instruction";
+ case HVM_GE_C_RMAL:
+ return "Misaligned data load";
+ case HVM_GE_C_WMAL:
+ return "Misaligned data store";
+ case HVM_GE_C_INVI:
+ case HVM_GE_C_PRIVI:
+ return "Illegal instruction";
+ case HVM_GE_C_BUS:
+ return "Precise bus error";
+ case HVM_GE_C_CACHE:
+ return "Cache error";
+
+ case 0xdb:
+ return "Debugger trap";
+
+ default:
+ return "Unrecognized exception";
+ }
+}
+
+static void do_show_stack(struct task_struct *task, unsigned long *fp,
+ unsigned long ip)
+{
+ int kstack_depth_to_print = 24;
+ unsigned long offset, size;
+ const char *name = NULL;
+ unsigned long *newfp;
+ unsigned long low, high;
+ char tmpstr[128];
+ char *modname;
+ int i;
+
+ if (task == NULL)
+ task = current;
+
+ printk(KERN_INFO "CPU#%d, %s/%d, Call Trace:\n",
+ raw_smp_processor_id(), task->comm,
+ task_pid_nr(task));
+
+ if (fp == NULL) {
+ if (task == current) {
+ asm("%0 = r30" : "=r" (fp));
+ } else {
+ fp = (unsigned long *)
+ ((struct hexagon_switch_stack *)
+ task->thread.switch_sp)->fp;
+ }
+ }
+
+ if ((((unsigned long) fp) & 0x3) || ((unsigned long) fp < 0x1000)) {
+ printk(KERN_INFO "-- Corrupt frame pointer %p\n", fp);
+ return;
+ }
+
+ /* Saved link reg is one word above FP */
+ if (!ip)
+ ip = *(fp+1);
+
+ /* Expect kernel stack to be in-bounds */
+ low = (unsigned long)task_stack_page(task);
+ high = low + THREAD_SIZE - 8;
+ low += sizeof(struct thread_info);
+
+ for (i = 0; i < kstack_depth_to_print; i++) {
+
+ name = kallsyms_lookup(ip, &size, &offset, &modname, tmpstr);
+
+ printk(KERN_INFO "[%p] 0x%lx: %s + 0x%lx", fp, ip, name,
+ offset);
+ if (((unsigned long) fp < low) || (high < (unsigned long) fp))
+ printk(KERN_CONT " (FP out of bounds!)");
+ if (modname)
+ printk(KERN_CONT " [%s] ", modname);
+ printk(KERN_CONT "\n");
+
+ newfp = (unsigned long *) *fp;
+
+ if (((unsigned long) newfp) & 0x3) {
+ printk(KERN_INFO "-- Corrupt frame pointer %p\n",
+ newfp);
+ break;
+ }
+
+ /* Attempt to continue past exception. */
+ if (0 == newfp) {
+ struct pt_regs *regs = (struct pt_regs *) (((void *)fp)
+ + 8);
+
+ if (regs->syscall_nr != -1) {
+ printk(KERN_INFO "-- trap0 -- syscall_nr: %ld",
+ regs->syscall_nr);
+ printk(KERN_CONT " psp: %lx elr: %lx\n",
+ pt_psp(regs), pt_elr(regs));
+ break;
+ } else {
+ /* really want to see more ... */
+ kstack_depth_to_print += 6;
+ printk(KERN_INFO "-- %s (0x%lx) badva: %lx\n",
+ ex_name(pt_cause(regs)), pt_cause(regs),
+ pt_badva(regs));
+ }
+
+ newfp = (unsigned long *) regs->r30;
+ ip = pt_elr(regs);
+ } else {
+ ip = *(newfp + 1);
+ }
+
+ /* If link reg is null, we are done. */
+ if (ip == 0x0)
+ break;
+
+ /* If newfp isn't larger, we're tracing garbage. */
+ if (newfp > fp)
+ fp = newfp;
+ else
+ break;
+ }
+}
+
+void show_stack(struct task_struct *task, unsigned long *fp)
+{
+ /* Saved link reg is one word above FP */
+ do_show_stack(task, fp, 0);
+}
+
+void dump_stack(void)
+{
+ unsigned long *fp;
+ asm("%0 = r30" : "=r" (fp));
+ show_stack(current, fp);
+}
+EXPORT_SYMBOL(dump_stack);
+
+int die(const char *str, struct pt_regs *regs, long err)
+{
+ static struct {
+ spinlock_t lock;
+ int counter;
+ } die = {
+ .lock = __SPIN_LOCK_UNLOCKED(die.lock),
+ .counter = 0
+ };
+
+ console_verbose();
+ oops_enter();
+
+ spin_lock_irq(&die.lock);
+ bust_spinlocks(1);
+ printk(KERN_EMERG "Oops: %s[#%d]:\n", str, ++die.counter);
+
+ if (notify_die(DIE_OOPS, str, regs, err, pt_cause(regs), SIGSEGV) ==
+ NOTIFY_STOP)
+ return 1;
+
+ print_modules();
+ show_regs(regs);
+ do_show_stack(current, ®s->r30, pt_elr(regs));
+
+ bust_spinlocks(0);
+ add_taint(TAINT_DIE);
+
+ spin_unlock_irq(&die.lock);
+
+ if (in_interrupt())
+ panic("Fatal exception in interrupt");
+
+ if (panic_on_oops)
+ panic("Fatal exception");
+
+ oops_exit();
+ do_exit(err);
+ return 0;
+}
+
+int die_if_kernel(char *str, struct pt_regs *regs, long err)
+{
+ if (!user_mode(regs))
+ return die(str, regs, err);
+ else
+ return 0;
+}
+
+/*
+ * It's not clear that misaligned fetches are ever recoverable.
+ */
+static void misaligned_instruction(struct pt_regs *regs)
+{
+ die_if_kernel("Misaligned Instruction", regs, 0);
+ force_sig(SIGBUS, current);
+}
+
+/*
+ * Misaligned loads and stores, on the other hand, can be
+ * emulated, and probably should be, some day. But for now
+ * they will be considered fatal.
+ */
+static void misaligned_data_load(struct pt_regs *regs)
+{
+ die_if_kernel("Misaligned Data Load", regs, 0);
+ force_sig(SIGBUS, current);
+}
+
+static void misaligned_data_store(struct pt_regs *regs)
+{
+ die_if_kernel("Misaligned Data Store", regs, 0);
+ force_sig(SIGBUS, current);
+}
+
+static void illegal_instruction(struct pt_regs *regs)
+{
+ die_if_kernel("Illegal Instruction", regs, 0);
+ force_sig(SIGILL, current);
+}
+
+/*
+ * Precise bus errors may be recoverable with a a retry,
+ * but for now, treat them as irrecoverable.
+ */
+static void precise_bus_error(struct pt_regs *regs)
+{
+ die_if_kernel("Precise Bus Error", regs, 0);
+ force_sig(SIGBUS, current);
+}
+
+/*
+ * If anything is to be done here other than panic,
+ * it will probably be complex and migrate to another
+ * source module. For now, just die.
+ */
+static void cache_error(struct pt_regs *regs)
+{
+ die("Cache Error", regs, 0);
+}
+
+/*
+ * General exception handler
+ */
+void do_genex(struct pt_regs *regs)
+{
+ /*
+ * Decode Cause and Dispatch
+ */
+ switch (pt_cause(regs)) {
+ case HVM_GE_C_XPROT:
+ case HVM_GE_C_XUSER:
+ execute_protection_fault(regs);
+ break;
+ case HVM_GE_C_RPROT:
+ case HVM_GE_C_RUSER:
+ read_protection_fault(regs);
+ break;
+ case HVM_GE_C_WPROT:
+ case HVM_GE_C_WUSER:
+ write_protection_fault(regs);
+ break;
+ case HVM_GE_C_XMAL:
+ misaligned_instruction(regs);
+ break;
+ case HVM_GE_C_RMAL:
+ misaligned_data_load(regs);
+ break;
+ case HVM_GE_C_WMAL:
+ misaligned_data_store(regs);
+ break;
+ case HVM_GE_C_INVI:
+ case HVM_GE_C_PRIVI:
+ illegal_instruction(regs);
+ break;
+ case HVM_GE_C_BUS:
+ precise_bus_error(regs);
+ break;
+ case HVM_GE_C_CACHE:
+ cache_error(regs);
+ break;
+ default:
+ /* Halt and catch fire */
+ panic("Unrecognized exception 0x%lx\n", pt_cause(regs));
+ break;
+ }
+}
+
+/* Indirect system call dispatch */
+long sys_syscall(void)
+{
+ printk(KERN_ERR "sys_syscall invoked!\n");
+ return -ENOSYS;
+}
+
+void do_trap0(struct pt_regs *regs)
+{
+ unsigned long syscallret = 0;
+ syscall_fn syscall;
+
+ switch (pt_cause(regs)) {
+ case TRAP_SYSCALL:
+ /* System call is trap0 #1 */
+
+ /* allow strace to catch syscall args */
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACE) &&
+ tracehook_report_syscall_entry(regs)))
+ return; /* return -ENOSYS somewhere? */
+
+ /* Interrupts should be re-enabled for syscall processing */
+ __vmsetie(VM_INT_ENABLE);
+
+ /*
+ * System call number is in r6, arguments in r0..r5.
+ * Fortunately, no Linux syscall has more than 6 arguments,
+ * and Hexagon ABI passes first 6 arguments in registers.
+ * 64-bit arguments are passed in odd/even register pairs.
+ * Fortunately, we have no system calls that take more
+ * than three arguments with more than one 64-bit value.
+ * Should that change, we'd need to redesign to copy
+ * between user and kernel stacks.
+ */
+ regs->syscall_nr = regs->r06;
+
+ /*
+ * GPR R0 carries the first parameter, and is also used
+ * to report the return value. We need a backup of
+ * the user's value in case we need to do a late restart
+ * of the system call.
+ */
+ regs->restart_r0 = regs->r00;
+
+ if ((unsigned long) regs->syscall_nr >= __NR_syscalls) {
+ regs->r00 = -1;
+ } else {
+ syscall = (syscall_fn)
+ (sys_call_table[regs->syscall_nr]);
+ syscallret = syscall(regs->r00, regs->r01,
+ regs->r02, regs->r03,
+ regs->r04, regs->r05);
+ }
+
+ /*
+ * If it was a sigreturn system call, don't overwrite
+ * r0 value in stack frame with return value.
+ *
+ * __NR_sigreturn doesn't seem to exist in new unistd.h
+ */
+
+ if (regs->syscall_nr != __NR_rt_sigreturn)
+ regs->r00 = syscallret;
+
+ /* allow strace to get the syscall return state */
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACE)))
+ tracehook_report_syscall_exit(regs, 0);
+
+ break;
+ case TRAP_DEBUG:
+ /* Trap0 0xdb is debug breakpoint */
+ if (user_mode(regs)) {
+ struct siginfo info;
+
+ info.si_signo = SIGTRAP;
+ info.si_errno = 0;
+ /*
+ * Some architecures add some per-thread state
+ * to distinguish between breakpoint traps and
+ * trace traps. We may want to do that, and
+ * set the si_code value appropriately, or we
+ * may want to use a different trap0 flavor.
+ */
+ info.si_code = TRAP_BRKPT;
+ info.si_addr = (void __user *) pt_elr(regs);
+ send_sig_info(SIGTRAP, &info, current);
+ } else {
+#ifdef CONFIG_KGDB
+ kgdb_handle_exception(pt_cause(regs), SIGTRAP,
+ TRAP_BRKPT, regs);
+#endif
+ }
+ break;
+ }
+ /* Ignore other trap0 codes for now, especially 0 (Angel calls) */
+}
+
+/*
+ * Machine check exception handler
+ */
+void do_machcheck(struct pt_regs *regs)
+{
+ /* Halt and catch fire */
+ __vmstop();
+}
diff --git a/arch/hexagon/kernel/vdso.c b/arch/hexagon/kernel/vdso.c
new file mode 100644
index 0000000..16277c3
--- /dev/null
+++ b/arch/hexagon/kernel/vdso.c
@@ -0,0 +1,100 @@
+/*
+ * vDSO implementation for Hexagon
+ *
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/err.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+
+#include <asm/vdso.h>
+
+static struct page *vdso_page;
+
+/* Create a vDSO page holding the signal trampoline.
+ * We want this for a non-executable stack.
+ */
+static int __init vdso_init(void)
+{
+ struct hexagon_vdso *vdso;
+
+ vdso_page = alloc_page(GFP_KERNEL);
+ if (!vdso_page)
+ panic("Cannot allocate vdso");
+
+ vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
+ if (!vdso)
+ panic("Cannot map vdso");
+ clear_page(vdso);
+
+ /* Install the signal trampoline; currently looks like this:
+ * r6 = #__NR_rt_sigreturn;
+ * trap0(#1);
+ */
+ vdso->rt_signal_trampoline[0] = __rt_sigtramp_template[0];
+ vdso->rt_signal_trampoline[1] = __rt_sigtramp_template[1];
+
+ vunmap(vdso);
+
+ return 0;
+}
+arch_initcall(vdso_init);
+
+/*
+ * Called from binfmt_elf. Create a VMA for the vDSO page.
+ */
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ int ret;
+ unsigned long vdso_base;
+ struct mm_struct *mm = current->mm;
+
+ down_write(&mm->mmap_sem);
+
+ /* Try to get it loaded right near ld.so/glibc. */
+ vdso_base = STACK_TOP;
+
+ vdso_base = get_unmapped_area(NULL, vdso_base, PAGE_SIZE, 0, 0);
+ if (IS_ERR_VALUE(vdso_base)) {
+ ret = vdso_base;
+ goto up_fail;
+ }
+
+ /* MAYWRITE to allow gdb to COW and set breakpoints. */
+ ret = install_special_mapping(mm, vdso_base, PAGE_SIZE,
+ VM_READ|VM_EXEC|
+ VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+ VM_ALWAYSDUMP,
+ &vdso_page);
+
+ if (ret)
+ goto up_fail;
+
+ mm->context.vdso = (void *)vdso_base;
+
+up_fail:
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+ return "[vdso]";
+ return NULL;
+}
diff --git a/arch/hexagon/kernel/vm_entry.S b/arch/hexagon/kernel/vm_entry.S
new file mode 100644
index 0000000..5b99066
--- /dev/null
+++ b/arch/hexagon/kernel/vm_entry.S
@@ -0,0 +1,269 @@
+/*
+ * Event entry/exit for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <asm/asm-offsets.h> /* assembly-safer versions of C defines */
+#include <asm/mem-layout.h> /* sigh, except for page_offset */
+#include <asm/hexagon_vm.h>
+#include <asm/thread_info.h>
+
+/*
+ * Entry into guest-mode Linux under Hexagon Virtual Machine.
+ * Stack pointer points to event record - build pt_regs on top of it,
+ * set up a plausible C stack frame, and dispatch to the C handler.
+ * On return, do vmrte virtual instruction with SP where we started.
+ *
+ * VM Spec 0.5 uses a trap to fetch HVM record now.
+ */
+
+/*
+ * Save full register state, while setting up thread_info struct
+ * pointer derived from kernel stack pointer in THREADINFO_REG
+ * register, putting prior thread_info.regs pointer in a callee-save
+ * register (R24, which had better not ever be assigned to THREADINFO_REG),
+ * and updating thread_info.regs to point to current stack frame,
+ * so as to support nested events in kernel mode.
+ *
+ * As this is common code, we set the pt_regs system call number
+ * to -1 for all events. It will be replaced with the system call
+ * number in the case where we decode a system call (trap0(#1)).
+ */
+
+#define save_pt_regs()\
+ memd(R0 + #_PT_R3130) = R31:30; \
+ { memw(R0 + #_PT_R2928) = R28; \
+ R31 = memw(R0 + #_PT_ER_VMPSP); }\
+ { memw(R0 + #(_PT_R2928 + 4)) = R31; \
+ R31 = ugp; } \
+ { memd(R0 + #_PT_R2726) = R27:26; \
+ R30 = gp ; } \
+ memd(R0 + #_PT_R2524) = R25:24; \
+ memd(R0 + #_PT_R2322) = R23:22; \
+ memd(R0 + #_PT_R2120) = R21:20; \
+ memd(R0 + #_PT_R1918) = R19:18; \
+ memd(R0 + #_PT_R1716) = R17:16; \
+ memd(R0 + #_PT_R1514) = R15:14; \
+ memd(R0 + #_PT_R1312) = R13:12; \
+ { memd(R0 + #_PT_R1110) = R11:10; \
+ R15 = lc0; } \
+ { memd(R0 + #_PT_R0908) = R9:8; \
+ R14 = sa0; } \
+ { memd(R0 + #_PT_R0706) = R7:6; \
+ R13 = lc1; } \
+ { memd(R0 + #_PT_R0504) = R5:4; \
+ R12 = sa1; } \
+ { memd(R0 + #_PT_UGPGP) = R31:30; \
+ R11 = m1; \
+ R2.H = #HI(_THREAD_SIZE); } \
+ { memd(R0 + #_PT_LC0SA0) = R15:14; \
+ R10 = m0; \
+ R2.L = #LO(_THREAD_SIZE); } \
+ { memd(R0 + #_PT_LC1SA1) = R13:12; \
+ R15 = p3:0; \
+ R2 = neg(R2); } \
+ { memd(R0 + #_PT_M1M0) = R11:10; \
+ R14 = usr; \
+ R2 = and(R0,R2); } \
+ { memd(R0 + #_PT_PREDSUSR) = R15:14; \
+ THREADINFO_REG = R2; } \
+ { r24 = memw(THREADINFO_REG + #_THREAD_INFO_PT_REGS); \
+ memw(THREADINFO_REG + #_THREAD_INFO_PT_REGS) = R0; \
+ R2 = #-1; } \
+ { memw(R0 + #_PT_SYSCALL_NR) = R2; \
+ R30 = #0; }
+
+/*
+ * Restore registers and thread_info.regs state. THREADINFO_REG
+ * is assumed to still be sane, and R24 to have been correctly
+ * preserved. Don't restore R29 (SP) until later.
+ */
+
+#define restore_pt_regs() \
+ { memw(THREADINFO_REG + #_THREAD_INFO_PT_REGS) = R24; \
+ R15:14 = memd(R0 + #_PT_PREDSUSR); } \
+ { R11:10 = memd(R0 + #_PT_M1M0); \
+ p3:0 = R15; } \
+ { R13:12 = memd(R0 + #_PT_LC1SA1); \
+ usr = R14; } \
+ { R15:14 = memd(R0 + #_PT_LC0SA0); \
+ m1 = R11; } \
+ { R3:2 = memd(R0 + #_PT_R0302); \
+ m0 = R10; } \
+ { R5:4 = memd(R0 + #_PT_R0504); \
+ lc1 = R13; } \
+ { R7:6 = memd(R0 + #_PT_R0706); \
+ sa1 = R12; } \
+ { R9:8 = memd(R0 + #_PT_R0908); \
+ lc0 = R15; } \
+ { R11:10 = memd(R0 + #_PT_R1110); \
+ sa0 = R14; } \
+ { R13:12 = memd(R0 + #_PT_R1312); \
+ R15:14 = memd(R0 + #_PT_R1514); } \
+ { R17:16 = memd(R0 + #_PT_R1716); \
+ R19:18 = memd(R0 + #_PT_R1918); } \
+ { R21:20 = memd(R0 + #_PT_R2120); \
+ R23:22 = memd(R0 + #_PT_R2322); } \
+ { R25:24 = memd(R0 + #_PT_R2524); \
+ R27:26 = memd(R0 + #_PT_R2726); } \
+ R31:30 = memd(R0 + #_PT_UGPGP); \
+ { R28 = memw(R0 + #_PT_R2928); \
+ ugp = R31; } \
+ { R31:30 = memd(R0 + #_PT_R3130); \
+ gp = R30; }
+
+ /*
+ * Clears off enough space for the rest of pt_regs; evrec is a part
+ * of pt_regs in HVM mode. Save R0/R1, set handler's address in R1.
+ * R0 is the address of pt_regs and is the parameter to save_pt_regs.
+ */
+
+/*
+ * Since the HVM isn't automagically pushing the EVREC onto the stack anymore,
+ * we'll subract the entire size out and then fill it in ourselves.
+ * Need to save off R0, R1, R2, R3 immediately.
+ */
+
+#define vm_event_entry(CHandler) \
+ { \
+ R29 = add(R29, #-(_PT_REGS_SIZE)); \
+ memd(R29 + #(_PT_R0100 + -_PT_REGS_SIZE)) = R1:0; \
+ } \
+ { \
+ memd(R29 +#_PT_R0302) = R3:2; \
+ } \
+ trap1(#HVM_TRAP1_VMGETREGS); \
+ { \
+ memd(R29 + #_PT_ER_VMEL) = R1:0; \
+ R0 = R29; \
+ R1.L = #LO(CHandler); \
+ } \
+ { \
+ memd(R29 + #_PT_ER_VMPSP) = R3:2; \
+ R1.H = #HI(CHandler); \
+ jump event_dispatch; \
+ }
+
+.text
+ /*
+ * Do bulk save/restore in one place.
+ * Adds a jump to dispatch latency, but
+ * saves hundreds of bytes.
+ */
+
+event_dispatch:
+ save_pt_regs()
+ callr r1
+
+ /*
+ * If we were in kernel mode, we don't need to check scheduler
+ * or signals if CONFIG_PREEMPT is not set. If set, then it has
+ * to jump to a need_resched kind of block.
+ * BTW, CONFIG_PREEMPT is not supported yet.
+ */
+
+#ifdef CONFIG_PREEMPT
+ R0 = #VM_INT_DISABLE
+ trap1(#HVM_TRAP1_VMSETIE)
+#endif
+
+ /* "Nested control path" -- if the previous mode was kernel */
+ R0 = memw(R29 + #_PT_ER_VMEST);
+ P0 = tstbit(R0, #HVM_VMEST_UM_SFT);
+ if !P0 jump restore_all;
+ /*
+ * Returning from system call, normally coming back from user mode
+ */
+return_from_syscall:
+ /* Disable interrupts while checking TIF */
+ R0 = #VM_INT_DISABLE
+ trap1(#HVM_TRAP1_VMSETIE)
+
+ /*
+ * Coming back from the C-world, our thread info pointer
+ * should be in the designated register (usually R19)
+ */
+ R1.L = #LO(_TIF_ALLWORK_MASK)
+ {
+ R1.H = #HI(_TIF_ALLWORK_MASK);
+ R0 = memw(THREADINFO_REG + #_THREAD_INFO_FLAGS);
+ }
+
+ /*
+ * Compare against the "return to userspace" _TIF_WORK_MASK
+ */
+ R1 = and(R1,R0);
+ { P0 = cmp.eq(R1,#0); if (!P0.new) jump:t work_pending;}
+ jump restore_all; /* we're outta here! */
+
+work_pending:
+ {
+ P0 = tstbit(R1, #TIF_NEED_RESCHED);
+ if (!P0.new) jump:nt work_notifysig;
+ }
+ call schedule
+ jump return_from_syscall; /* check for more work */
+
+work_notifysig:
+ /* this is the part that's kind of fuzzy. */
+ R1 = and(R0, #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME));
+ P0 = cmp.eq(R1, #0);
+ if P0 jump restore_all
+ R1 = R0; /* unsigned long thread_info_flags */
+ R0 = R29; /* regs should still be at top of stack */
+ call do_notify_resume
+
+restore_all:
+ /* Disable interrupts, if they weren't already, before reg restore. */
+ R0 = #VM_INT_DISABLE
+ trap1(#HVM_TRAP1_VMSETIE)
+
+ /* do the setregs here for VM 0.5 */
+ /* R29 here should already be pointing at pt_regs */
+ R1:0 = memd(R29 + #_PT_ER_VMEL);
+ R3:2 = memd(R29 + #_PT_ER_VMPSP);
+ trap1(#HVM_TRAP1_VMSETREGS);
+
+ R0 = R29
+ restore_pt_regs()
+ R1:0 = memd(R29 + #_PT_R0100);
+ R29 = add(R29, #_PT_REGS_SIZE);
+ trap1(#HVM_TRAP1_VMRTE)
+ /* Notreached */
+
+ .globl _K_enter_genex
+_K_enter_genex:
+ vm_event_entry(do_genex)
+
+ .globl _K_enter_interrupt
+_K_enter_interrupt:
+ vm_event_entry(arch_do_IRQ)
+
+ .globl _K_enter_trap0
+_K_enter_trap0:
+ vm_event_entry(do_trap0)
+
+ .globl _K_enter_machcheck
+_K_enter_machcheck:
+ vm_event_entry(do_machcheck)
+
+
+ .globl ret_from_fork
+ret_from_fork:
+ call schedule_tail
+ jump return_from_syscall
diff --git a/arch/hexagon/kernel/vm_events.c b/arch/hexagon/kernel/vm_events.c
new file mode 100644
index 0000000..986a081e
--- /dev/null
+++ b/arch/hexagon/kernel/vm_events.c
@@ -0,0 +1,101 @@
+/*
+ * Mostly IRQ support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <asm/registers.h>
+#include <linux/irq.h>
+#include <linux/hardirq.h>
+#include <asm/system.h>
+
+/*
+ * show_regs - print pt_regs structure
+ * @regs: pointer to pt_regs
+ *
+ * To-do: add all the accessor definitions to registers.h
+ *
+ * Will make this routine a lot easier to write.
+ */
+void show_regs(struct pt_regs *regs)
+{
+ printk(KERN_EMERG "restart_r0: \t0x%08lx syscall_nr: %ld\n",
+ regs->restart_r0, regs->syscall_nr);
+ printk(KERN_EMERG "preds: \t\t0x%08lx\n", regs->preds);
+ printk(KERN_EMERG "lc0: \t0x%08lx sa0: 0x%08lx m0: 0x%08lx\n",
+ regs->lc0, regs->sa0, regs->m0);
+ printk(KERN_EMERG "lc1: \t0x%08lx sa1: 0x%08lx m1: 0x%08lx\n",
+ regs->lc1, regs->sa1, regs->m1);
+ printk(KERN_EMERG "gp: \t0x%08lx ugp: 0x%08lx usr: 0x%08lx\n",
+ regs->gp, regs->ugp, regs->usr);
+ printk(KERN_EMERG "r0: \t0x%08lx %08lx %08lx %08lx\n", regs->r00,
+ regs->r01,
+ regs->r02,
+ regs->r03);
+ printk(KERN_EMERG "r4: \t0x%08lx %08lx %08lx %08lx\n", regs->r04,
+ regs->r05,
+ regs->r06,
+ regs->r07);
+ printk(KERN_EMERG "r8: \t0x%08lx %08lx %08lx %08lx\n", regs->r08,
+ regs->r09,
+ regs->r10,
+ regs->r11);
+ printk(KERN_EMERG "r12: \t0x%08lx %08lx %08lx %08lx\n", regs->r12,
+ regs->r13,
+ regs->r14,
+ regs->r15);
+ printk(KERN_EMERG "r16: \t0x%08lx %08lx %08lx %08lx\n", regs->r16,
+ regs->r17,
+ regs->r18,
+ regs->r19);
+ printk(KERN_EMERG "r20: \t0x%08lx %08lx %08lx %08lx\n", regs->r20,
+ regs->r21,
+ regs->r22,
+ regs->r23);
+ printk(KERN_EMERG "r24: \t0x%08lx %08lx %08lx %08lx\n", regs->r24,
+ regs->r25,
+ regs->r26,
+ regs->r27);
+ printk(KERN_EMERG "r28: \t0x%08lx %08lx %08lx %08lx\n", regs->r28,
+ regs->r29,
+ regs->r30,
+ regs->r31);
+
+ printk(KERN_EMERG "elr: \t0x%08lx cause: 0x%08lx user_mode: %d\n",
+ pt_elr(regs), pt_cause(regs), user_mode(regs));
+ printk(KERN_EMERG "psp: \t0x%08lx badva: 0x%08lx int_enabled: %d\n",
+ pt_psp(regs), pt_badva(regs), ints_enabled(regs));
+}
+
+void dummy_handler(struct pt_regs *regs)
+{
+ unsigned int elr = pt_elr(regs);
+ printk(KERN_ERR "Unimplemented handler; ELR=0x%08x\n", elr);
+}
+
+
+void arch_do_IRQ(struct pt_regs *regs)
+{
+ int irq = pt_cause(regs);
+ struct pt_regs *old_regs = set_irq_regs(regs);
+
+ irq_enter();
+ generic_handle_irq(irq);
+ irq_exit();
+ set_irq_regs(old_regs);
+}
diff --git a/arch/hexagon/kernel/vm_init_segtable.S b/arch/hexagon/kernel/vm_init_segtable.S
new file mode 100644
index 0000000..aebb35b
--- /dev/null
+++ b/arch/hexagon/kernel/vm_init_segtable.S
@@ -0,0 +1,442 @@
+/*
+ * Initial page table for Linux kernel under Hexagon VM,
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * These tables are pre-computed and linked into kernel.
+ */
+
+#include <asm/vm_mmu.h>
+/* #include <asm/iomap.h> */
+
+/*
+ * Start with mapping PA=0 to both VA=0x0 and VA=0xc000000 as 16MB large pages.
+ * No user mode access, RWX, write-back cache. The entry needs
+ * to be replicated for all 4 virtual segments mapping to the page.
+ */
+
+/* "Big Kernel Page" */
+#define BKP(pa) (((pa) & __HVM_PTE_PGMASK_4MB) \
+ | __HVM_PTE_R | __HVM_PTE_W | __HVM_PTE_X \
+ | __HEXAGON_C_WB_L2 << 6 \
+ | __HVM_PDE_S_16MB)
+
+/* No cache version */
+
+#define BKPG_IO(pa) (((pa) & __HVM_PTE_PGMASK_16MB) \
+ | __HVM_PTE_R | __HVM_PTE_W | __HVM_PTE_X \
+ | __HVM_PDE_S_16MB | __HEXAGON_C_DEV << 6 )
+
+#define FOURK_IO(pa) (((pa) & __HVM_PTE_PGMASK_4KB) \
+ | __HVM_PTE_R | __HVM_PTE_W | __HVM_PTE_X \
+ | __HEXAGON_C_DEV << 6 )
+
+#define L2_PTR(pa) (((pa) & __HVM_PTE_PGMASK_4KB) \
+ | __HVM_PDE_S_4KB )
+
+#define X __HVM_PDE_S_INVALID
+
+ .p2align 12
+ .globl swapper_pg_dir
+ .globl _K_init_segtable
+swapper_pg_dir:
+/* VA 0x00000000 */
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+/* VA 0x40000000 */
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+/* VA 0x80000000 */
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+/*0xa8*/.word X,X,X,X
+#ifdef CONFIG_COMET_EARLY_UART_DEBUG
+UART_PTE_ENTRY:
+/*0xa9*/.word BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000)
+#else
+/*0xa9*/.word X,X,X,X
+#endif
+/*0xaa*/.word X,X,X,X
+/*0xab*/.word X,X,X,X
+/*0xac*/.word X,X,X,X
+/*0xad*/.word X,X,X,X
+/*0xae*/.word X,X,X,X
+/*0xaf*/.word X,X,X,X
+/*0xb0*/.word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+ .word X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X
+_K_init_segtable:
+/* VA 0xC0000000 */
+ .word BKP(0x00000000), BKP(0x00400000), BKP(0x00800000), BKP(0x00c00000)
+ .word BKP(0x01000000), BKP(0x01400000), BKP(0x01800000), BKP(0x01c00000)
+ .word BKP(0x02000000), BKP(0x02400000), BKP(0x02800000), BKP(0x02c00000)
+ .word BKP(0x03000000), BKP(0x03400000), BKP(0x03800000), BKP(0x03c00000)
+ .word BKP(0x04000000), BKP(0x04400000), BKP(0x04800000), BKP(0x04c00000)
+ .word BKP(0x05000000), BKP(0x05400000), BKP(0x05800000), BKP(0x05c00000)
+ .word BKP(0x06000000), BKP(0x06400000), BKP(0x06800000), BKP(0x06c00000)
+ .word BKP(0x07000000), BKP(0x07400000), BKP(0x07800000), BKP(0x07c00000)
+
+ .word BKP(0x08000000), BKP(0x08400000), BKP(0x08800000), BKP(0x08c00000)
+ .word BKP(0x09000000), BKP(0x09400000), BKP(0x09800000), BKP(0x09c00000)
+ .word BKP(0x0a000000), BKP(0x0a400000), BKP(0x0a800000), BKP(0x0ac00000)
+ .word BKP(0x0b000000), BKP(0x0b400000), BKP(0x0b800000), BKP(0x0bc00000)
+ .word BKP(0x0c000000), BKP(0x0c400000), BKP(0x0c800000), BKP(0x0cc00000)
+ .word BKP(0x0d000000), BKP(0x0d400000), BKP(0x0d800000), BKP(0x0dc00000)
+ .word BKP(0x0e000000), BKP(0x0e400000), BKP(0x0e800000), BKP(0x0ec00000)
+ .word BKP(0x0f000000), BKP(0x0f400000), BKP(0x0f800000), BKP(0x0fc00000)
+
+ .word BKP(0x10000000), BKP(0x10400000), BKP(0x10800000), BKP(0x10c00000)
+ .word BKP(0x11000000), BKP(0x11400000), BKP(0x11800000), BKP(0x11c00000)
+ .word BKP(0x12000000), BKP(0x12400000), BKP(0x12800000), BKP(0x12c00000)
+ .word BKP(0x13000000), BKP(0x13400000), BKP(0x13800000), BKP(0x13c00000)
+ .word BKP(0x14000000), BKP(0x14400000), BKP(0x14800000), BKP(0x14c00000)
+ .word BKP(0x15000000), BKP(0x15400000), BKP(0x15800000), BKP(0x15c00000)
+ .word BKP(0x16000000), BKP(0x16400000), BKP(0x16800000), BKP(0x16c00000)
+ .word BKP(0x17000000), BKP(0x17400000), BKP(0x17800000), BKP(0x17c00000)
+
+ .word BKP(0x18000000), BKP(0x18400000), BKP(0x18800000), BKP(0x18c00000)
+ .word BKP(0x19000000), BKP(0x19400000), BKP(0x19800000), BKP(0x19c00000)
+ .word BKP(0x1a000000), BKP(0x1a400000), BKP(0x1a800000), BKP(0x1ac00000)
+ .word BKP(0x1b000000), BKP(0x1b400000), BKP(0x1b800000), BKP(0x1bc00000)
+ .word BKP(0x1c000000), BKP(0x1c400000), BKP(0x1c800000), BKP(0x1cc00000)
+ .word BKP(0x1d000000), BKP(0x1d400000), BKP(0x1d800000), BKP(0x1dc00000)
+ .word BKP(0x1e000000), BKP(0x1e400000), BKP(0x1e800000), BKP(0x1ec00000)
+ .word BKP(0x1f000000), BKP(0x1f400000), BKP(0x1f800000), BKP(0x1fc00000)
+
+ .word BKP(0x20000000), BKP(0x20400000), BKP(0x20800000), BKP(0x20c00000)
+ .word BKP(0x21000000), BKP(0x21400000), BKP(0x21800000), BKP(0x21c00000)
+ .word BKP(0x22000000), BKP(0x22400000), BKP(0x22800000), BKP(0x22c00000)
+ .word BKP(0x23000000), BKP(0x23400000), BKP(0x23800000), BKP(0x23c00000)
+ .word BKP(0x24000000), BKP(0x24400000), BKP(0x24800000), BKP(0x24c00000)
+ .word BKP(0x25000000), BKP(0x25400000), BKP(0x25800000), BKP(0x25c00000)
+ .word BKP(0x26000000), BKP(0x26400000), BKP(0x26800000), BKP(0x26c00000)
+ .word BKP(0x27000000), BKP(0x27400000), BKP(0x27800000), BKP(0x27c00000)
+
+ .word BKP(0x28000000), BKP(0x28400000), BKP(0x28800000), BKP(0x28c00000)
+ .word BKP(0x29000000), BKP(0x29400000), BKP(0x29800000), BKP(0x29c00000)
+ .word BKP(0x2a000000), BKP(0x2a400000), BKP(0x2a800000), BKP(0x2ac00000)
+ .word BKP(0x2b000000), BKP(0x2b400000), BKP(0x2b800000), BKP(0x2bc00000)
+ .word BKP(0x2c000000), BKP(0x2c400000), BKP(0x2c800000), BKP(0x2cc00000)
+ .word BKP(0x2d000000), BKP(0x2d400000), BKP(0x2d800000), BKP(0x2dc00000)
+ .word BKP(0x2e000000), BKP(0x2e400000), BKP(0x2e800000), BKP(0x2ec00000)
+ .word BKP(0x2f000000), BKP(0x2f400000), BKP(0x2f800000), BKP(0x2fc00000)
+
+ .word BKP(0x30000000), BKP(0x30400000), BKP(0x30800000), BKP(0x30c00000)
+ .word BKP(0x31000000), BKP(0x31400000), BKP(0x31800000), BKP(0x31c00000)
+ .word BKP(0x32000000), BKP(0x32400000), BKP(0x32800000), BKP(0x32c00000)
+ .word BKP(0x33000000), BKP(0x33400000), BKP(0x33800000), BKP(0x33c00000)
+ .word BKP(0x34000000), BKP(0x34400000), BKP(0x34800000), BKP(0x34c00000)
+ .word BKP(0x35000000), BKP(0x35400000), BKP(0x35800000), BKP(0x35c00000)
+ .word BKP(0x36000000), BKP(0x36400000), BKP(0x36800000), BKP(0x36c00000)
+ .word BKP(0x37000000), BKP(0x37400000), BKP(0x37800000), BKP(0x37c00000)
+
+ .word BKP(0x38000000), BKP(0x38400000), BKP(0x38800000), BKP(0x38c00000)
+ .word BKP(0x39000000), BKP(0x39400000), BKP(0x39800000), BKP(0x39c00000)
+ .word BKP(0x3a000000), BKP(0x3a400000), BKP(0x3a800000), BKP(0x3ac00000)
+ .word BKP(0x3b000000), BKP(0x3b400000), BKP(0x3b800000), BKP(0x3bc00000)
+ .word BKP(0x3c000000), BKP(0x3c400000), BKP(0x3c800000), BKP(0x3cc00000)
+ .word BKP(0x3d000000), BKP(0x3d400000), BKP(0x3d800000), BKP(0x3dc00000)
+_K_io_map:
+ .word X,X,X,X /* 0x3e000000 - device IO early remap */
+ .word X,X,X,X /* 0x3f000000 - hypervisor space*/
+
+#if 0
+/*
+ * This is in here as an example for devices which need to be mapped really
+ * early.
+ */
+ .p2align 12
+ .globl _K_io_kmap
+ .globl _K_init_devicetable
+_K_init_devicetable: /* Should be 4MB worth of entries */
+ .word FOURK_IO(MSM_GPIO1_PHYS),FOURK_IO(MSM_GPIO2_PHYS),FOURK_IO(MSM_SIRC_PHYS),X
+ .word FOURK_IO(TLMM_GPIO1_PHYS),X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+ .word X,X,X,X
+#endif
diff --git a/arch/hexagon/kernel/vm_ops.S b/arch/hexagon/kernel/vm_ops.S
new file mode 100644
index 0000000..24d7fca
--- /dev/null
+++ b/arch/hexagon/kernel/vm_ops.S
@@ -0,0 +1,102 @@
+/*
+ * Hexagon VM instruction support
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <asm/hexagon_vm.h>
+
+/*
+ * C wrappers for virtual machine "instructions". These
+ * could be, and perhaps some day will be, handled as in-line
+ * macros, but for tracing/debugging it's handy to have
+ * a single point of invocation for each of them.
+ * Conveniently, they take paramters and return values
+ * consistent with the ABI calling convention.
+ */
+
+ENTRY(__vmrte)
+ trap1(#HVM_TRAP1_VMRTE);
+ jumpr R31;
+
+ENTRY(__vmsetvec)
+ trap1(#HVM_TRAP1_VMSETVEC);
+ jumpr R31;
+
+ENTRY(__vmsetie)
+ trap1(#HVM_TRAP1_VMSETIE);
+ jumpr R31;
+
+ENTRY(__vmgetie)
+ trap1(#HVM_TRAP1_VMGETIE);
+ jumpr R31;
+
+ENTRY(__vmintop)
+ trap1(#HVM_TRAP1_VMINTOP);
+ jumpr R31;
+
+ENTRY(__vmclrmap)
+ trap1(#HVM_TRAP1_VMCLRMAP);
+ jumpr R31;
+
+ENTRY(__vmnewmap)
+ r1 = #VM_NEWMAP_TYPE_PGTABLES;
+ trap1(#HVM_TRAP1_VMNEWMAP);
+ jumpr R31;
+
+ENTRY(__vmcache)
+ trap1(#HVM_TRAP1_VMCACHE);
+ jumpr R31;
+
+ENTRY(__vmgettime)
+ trap1(#HVM_TRAP1_VMGETTIME);
+ jumpr R31;
+
+ENTRY(__vmsettime)
+ trap1(#HVM_TRAP1_VMSETTIME);
+ jumpr R31;
+
+ENTRY(__vmwait)
+ trap1(#HVM_TRAP1_VMWAIT);
+ jumpr R31;
+
+ENTRY(__vmyield)
+ trap1(#HVM_TRAP1_VMYIELD);
+ jumpr R31;
+
+ENTRY(__vmstart)
+ trap1(#HVM_TRAP1_VMSTART);
+ jumpr R31;
+
+ENTRY(__vmstop)
+ trap1(#HVM_TRAP1_VMSTOP);
+ jumpr R31;
+
+ENTRY(__vmvpid)
+ trap1(#HVM_TRAP1_VMVPID);
+ jumpr R31;
+
+/* Probably not actually going to use these; see vm_entry.S */
+
+ENTRY(__vmsetregs)
+ trap1(#HVM_TRAP1_VMSETREGS);
+ jumpr R31;
+
+ENTRY(__vmgetregs)
+ trap1(#HVM_TRAP1_VMGETREGS);
+ jumpr R31;
diff --git a/arch/hexagon/kernel/vm_switch.S b/arch/hexagon/kernel/vm_switch.S
new file mode 100644
index 0000000..0decf2f
--- /dev/null
+++ b/arch/hexagon/kernel/vm_switch.S
@@ -0,0 +1,95 @@
+/*
+ * Context switch support for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <asm/asm-offsets.h>
+
+.text
+
+/*
+ * The register used as a fast-path thread information pointer
+ * is determined as a kernel configuration option. If it happens
+ * to be a callee-save register, we're going to be saving and
+ * restoring it twice here.
+ *
+ * This code anticipates a revised ABI where R20-23 are added
+ * to the set of callee-save registers, but this should be
+ * backward compatible to legacy tools.
+ */
+
+
+/*
+ * void switch_to(struct task_struct *prev,
+ * struct task_struct *next, struct task_struct *last);
+ */
+ .p2align 2
+ .globl __switch_to
+ .type __switch_to, @function
+
+/*
+ * When we exit the wormhole, we need to store the previous task
+ * in the new R0's pointer. Technically it should be R2, but they should
+ * be the same; seems like a legacy thing. In short, don't butcher
+ * R0, let it go back out unmolested.
+ */
+
+__switch_to:
+ /*
+ * Push callee-saves onto "prev" stack.
+ * Here, we're sneaky because the LR and FP
+ * storage of the thread_stack structure
+ * is automagically allocated by allocframe,
+ * so we pass struct size less 8.
+ */
+ allocframe(#(_SWITCH_STACK_SIZE - 8));
+ memd(R29+#(_SWITCH_R2726))=R27:26;
+ memd(R29+#(_SWITCH_R2524))=R25:24;
+ memd(R29+#(_SWITCH_R2322))=R23:22;
+ memd(R29+#(_SWITCH_R2120))=R21:20;
+ memd(R29+#(_SWITCH_R1918))=R19:18;
+ memd(R29+#(_SWITCH_R1716))=R17:16;
+ /* Stash thread_info pointer in task_struct */
+ memw(R0+#_TASK_THREAD_INFO) = THREADINFO_REG;
+ memw(R0 +#(_TASK_STRUCT_THREAD + _THREAD_STRUCT_SWITCH_SP)) = R29;
+ /* Switch to "next" stack and restore callee saves from there */
+ R29 = memw(R1 + #(_TASK_STRUCT_THREAD + _THREAD_STRUCT_SWITCH_SP));
+ {
+ R27:26 = memd(R29+#(_SWITCH_R2726));
+ R25:24 = memd(R29+#(_SWITCH_R2524));
+ }
+ {
+ R23:22 = memd(R29+#(_SWITCH_R2322));
+ R21:20 = memd(R29+#(_SWITCH_R2120));
+ }
+ {
+ R19:18 = memd(R29+#(_SWITCH_R1918));
+ R17:16 = memd(R29+#(_SWITCH_R1716));
+ }
+ {
+ /* THREADINFO_REG is currently one of the callee-saved regs
+ * above, and so be sure to re-load it last.
+ */
+ THREADINFO_REG = memw(R1 + #_TASK_THREAD_INFO);
+ R31:30 = memd(R29+#_SWITCH_FP);
+ }
+ {
+ R29 = add(R29,#_SWITCH_STACK_SIZE);
+ jumpr R31;
+ }
+ .size __switch_to, .-__switch_to
diff --git a/arch/hexagon/kernel/vm_vectors.S b/arch/hexagon/kernel/vm_vectors.S
new file mode 100644
index 0000000..97a4b50
--- /dev/null
+++ b/arch/hexagon/kernel/vm_vectors.S
@@ -0,0 +1,48 @@
+/*
+ * Event jump tables
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <asm/hexagon_vm.h>
+
+.text
+
+/* This is registered early on to allow angel */
+.global _K_provisional_vec
+_K_provisional_vec:
+ jump 1f;
+ jump 1f;
+ jump 1f;
+ jump 1f;
+ jump 1f;
+ trap1(#HVM_TRAP1_VMRTE)
+ jump 1f;
+ jump 1f;
+
+
+.global _K_VM_event_vector
+_K_VM_event_vector:
+1:
+ jump 1b; /* Reset */
+ jump _K_enter_machcheck;
+ jump _K_enter_genex;
+ jump 1b; /* 3 Rsvd */
+ jump 1b; /* 4 Rsvd */
+ jump _K_enter_trap0;
+ jump 1b; /* 6 Rsvd */
+ jump _K_enter_interrupt;
diff --git a/arch/hexagon/kernel/vmlinux.lds.S b/arch/hexagon/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..071d3c3
--- /dev/null
+++ b/arch/hexagon/kernel/vmlinux.lds.S
@@ -0,0 +1,88 @@
+/*
+ * Linker script for Hexagon kernel
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define LOAD_OFFSET PAGE_OFFSET
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/asm-offsets.h> /* Most of the kernel defines are here */
+#include <asm/mem-layout.h> /* except for page_offset */
+#include <asm/cache.h> /* and now we're pulling cache line size */
+OUTPUT_ARCH(hexagon)
+ENTRY(stext)
+
+jiffies = jiffies_64;
+
+/*
+See asm-generic/vmlinux.lds.h for expansion of some of these macros.
+See asm-generic/sections.h for seemingly required labels.
+*/
+
+#define PAGE_SIZE _PAGE_SIZE
+
+/* This LOAD_OFFSET is temporary for debugging on the simulator; it may change
+ for hypervisor pseudo-physical memory. */
+
+
+SECTIONS
+{
+ . = PAGE_OFFSET + LOAD_ADDRESS;
+
+ __init_begin = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ PERCPU_SECTION(L1_CACHE_BYTES)
+ __init_end = .;
+
+ . = ALIGN(_PAGE_SIZE);
+ _stext = .;
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ _text = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ }
+ _etext = .;
+
+ INIT_DATA_SECTION(PAGE_SIZE)
+
+ _sdata = .;
+ RW_DATA_SECTION(32,PAGE_SIZE,PAGE_SIZE)
+ RO_DATA_SECTION(PAGE_SIZE)
+ _edata = .;
+
+ EXCEPTION_TABLE(16)
+ NOTES
+
+ BSS_SECTION(_PAGE_SIZE, _PAGE_SIZE, _PAGE_SIZE)
+
+ _end = .;
+
+ /DISCARD/ : {
+ EXIT_TEXT
+ EXIT_DATA
+ EXIT_CALL
+ }
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+}
diff --git a/arch/hexagon/lib/Makefile b/arch/hexagon/lib/Makefile
new file mode 100644
index 0000000..874655e
--- /dev/null
+++ b/arch/hexagon/lib/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for hexagon-specific library files.
+#
+obj-y = checksum.o io.o memcpy.o memset.o
diff --git a/arch/hexagon/lib/checksum.c b/arch/hexagon/lib/checksum.c
new file mode 100644
index 0000000..9300552
--- /dev/null
+++ b/arch/hexagon/lib/checksum.c
@@ -0,0 +1,203 @@
+/*
+ * Checksum functions for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/* This was derived from arch/alpha/lib/checksum.c */
+
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/byteorder.h>
+#include <net/checksum.h>
+#include <linux/uaccess.h>
+#include <asm/intrinsics.h>
+
+
+/* Vector value operations */
+#define SIGN(x, y) ((0x8000ULL*x)<<y)
+#define CARRY(x, y) ((0x0002ULL*x)<<y)
+#define SELECT(x, y) ((0x0001ULL*x)<<y)
+
+#define VR_NEGATE(a, b, c, d) (SIGN(a, 48) + SIGN(b, 32) + SIGN(c, 16) \
+ + SIGN(d, 0))
+#define VR_CARRY(a, b, c, d) (CARRY(a, 48) + CARRY(b, 32) + CARRY(c, 16) \
+ + CARRY(d, 0))
+#define VR_SELECT(a, b, c, d) (SELECT(a, 48) + SELECT(b, 32) + SELECT(c, 16) \
+ + SELECT(d, 0))
+
+
+/* optimized HEXAGON V3 intrinsic version */
+static inline unsigned short from64to16(u64 x)
+{
+ u64 sum;
+
+ sum = HEXAGON_P_vrmpyh_PP(x^VR_NEGATE(1, 1, 1, 1),
+ VR_SELECT(1, 1, 1, 1));
+ sum += VR_CARRY(0, 0, 1, 0);
+ sum = HEXAGON_P_vrmpyh_PP(sum, VR_SELECT(0, 0, 1, 1));
+
+ return 0xFFFF & sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented.
+ */
+__sum16 csum_tcpudp_magic(unsigned long saddr, unsigned long daddr,
+ unsigned short len, unsigned short proto,
+ __wsum sum)
+{
+ return (__force __sum16)~from64to16(
+ (__force u64)saddr + (__force u64)daddr +
+ (__force u64)sum + ((len + proto) << 8));
+}
+
+__wsum csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
+ unsigned short len, unsigned short proto,
+ __wsum sum)
+{
+ u64 result;
+
+ result = (__force u64)saddr + (__force u64)daddr +
+ (__force u64)sum + ((len + proto) << 8);
+
+ /* Fold down to 32-bits so we don't lose in the typedef-less
+ network stack. */
+ /* 64 to 33 */
+ result = (result & 0xffffffffUL) + (result >> 32);
+ /* 33 to 32 */
+ result = (result & 0xffffffffUL) + (result >> 32);
+ return (__force __wsum)result;
+}
+EXPORT_SYMBOL(csum_tcpudp_nofold);
+
+/*
+ * Do a 64-bit checksum on an arbitrary memory area..
+ *
+ * This isn't a great routine, but it's not _horrible_ either. The
+ * inner loop could be unrolled a bit further, and there are better
+ * ways to do the carry, but this is reasonable.
+ */
+
+/* optimized HEXAGON intrinsic version, with over read fixed */
+unsigned int do_csum(const void *voidptr, int len)
+{
+ u64 sum0, sum1, x0, x1, *ptr8_o, *ptr8_e, *ptr8;
+ int i, start, mid, end, mask;
+ const char *ptr = voidptr;
+ unsigned short *ptr2;
+ unsigned int *ptr4;
+
+ if (len <= 0)
+ return 0;
+
+ start = 0xF & (16-(((int) ptr) & 0xF)) ;
+ mask = 0x7fffffffUL >> HEXAGON_R_cl0_R(len);
+ start = start & mask ;
+
+ mid = len - start;
+ end = mid & 0xF;
+ mid = mid>>4;
+ sum0 = mid << 18;
+ sum1 = 0;
+
+ if (start & 1)
+ sum0 += (u64) (ptr[0] << 8);
+ ptr2 = (unsigned short *) &ptr[start & 1];
+ if (start & 2)
+ sum1 += (u64) ptr2[0];
+ ptr4 = (unsigned int *) &ptr[start & 3];
+ if (start & 4) {
+ sum0 = HEXAGON_P_vrmpyhacc_PP(sum0,
+ VR_NEGATE(0, 0, 1, 1)^((u64)ptr4[0]),
+ VR_SELECT(0, 0, 1, 1));
+ sum0 += VR_SELECT(0, 0, 1, 0);
+ }
+ ptr8 = (u64 *) &ptr[start & 7];
+ if (start & 8) {
+ sum1 = HEXAGON_P_vrmpyhacc_PP(sum1,
+ VR_NEGATE(1, 1, 1, 1)^(ptr8[0]),
+ VR_SELECT(1, 1, 1, 1));
+ sum1 += VR_CARRY(0, 0, 1, 0);
+ }
+ ptr8_o = (u64 *) (ptr + start);
+ ptr8_e = (u64 *) (ptr + start + 8);
+
+ if (mid) {
+ x0 = *ptr8_e; ptr8_e += 2;
+ x1 = *ptr8_o; ptr8_o += 2;
+ if (mid > 1)
+ for (i = 0; i < mid-1; i++) {
+ sum0 = HEXAGON_P_vrmpyhacc_PP(sum0,
+ x0^VR_NEGATE(1, 1, 1, 1),
+ VR_SELECT(1, 1, 1, 1));
+ sum1 = HEXAGON_P_vrmpyhacc_PP(sum1,
+ x1^VR_NEGATE(1, 1, 1, 1),
+ VR_SELECT(1, 1, 1, 1));
+ x0 = *ptr8_e; ptr8_e += 2;
+ x1 = *ptr8_o; ptr8_o += 2;
+ }
+ sum0 = HEXAGON_P_vrmpyhacc_PP(sum0, x0^VR_NEGATE(1, 1, 1, 1),
+ VR_SELECT(1, 1, 1, 1));
+ sum1 = HEXAGON_P_vrmpyhacc_PP(sum1, x1^VR_NEGATE(1, 1, 1, 1),
+ VR_SELECT(1, 1, 1, 1));
+ }
+
+ ptr4 = (unsigned int *) &ptr[start + (mid * 16) + (end & 8)];
+ if (end & 4) {
+ sum1 = HEXAGON_P_vrmpyhacc_PP(sum1,
+ VR_NEGATE(0, 0, 1, 1)^((u64)ptr4[0]),
+ VR_SELECT(0, 0, 1, 1));
+ sum1 += VR_SELECT(0, 0, 1, 0);
+ }
+ ptr2 = (unsigned short *) &ptr[start + (mid * 16) + (end & 12)];
+ if (end & 2)
+ sum0 += (u64) ptr2[0];
+
+ if (end & 1)
+ sum1 += (u64) ptr[start + (mid * 16) + (end & 14)];
+
+ ptr8 = (u64 *) &ptr[start + (mid * 16)];
+ if (end & 8) {
+ sum0 = HEXAGON_P_vrmpyhacc_PP(sum0,
+ VR_NEGATE(1, 1, 1, 1)^(ptr8[0]),
+ VR_SELECT(1, 1, 1, 1));
+ sum0 += VR_CARRY(0, 0, 1, 0);
+ }
+ sum0 = HEXAGON_P_vrmpyh_PP((sum0+sum1)^VR_NEGATE(0, 0, 0, 1),
+ VR_SELECT(0, 0, 1, 1));
+ sum0 += VR_NEGATE(0, 0, 0, 1);
+ sum0 = HEXAGON_P_vrmpyh_PP(sum0, VR_SELECT(0, 0, 1, 1));
+
+ if (start & 1)
+ sum0 = (sum0 << 8) | (0xFF & (sum0 >> 8));
+
+ return 0xFFFF & sum0;
+}
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
diff --git a/arch/hexagon/lib/io.c b/arch/hexagon/lib/io.c
new file mode 100644
index 0000000..8ae47ba
--- /dev/null
+++ b/arch/hexagon/lib/io.c
@@ -0,0 +1,91 @@
+/*
+ * I/O access functions for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <asm/io.h>
+
+/* These are all FIFO routines! */
+
+/*
+ * __raw_readsw - read words a short at a time
+ * @addr: source address
+ * @data: data address
+ * @len: number of shorts to read
+ */
+void __raw_readsw(const void __iomem *addr, void *data, int len)
+{
+ const volatile short int *src = (short int *) addr;
+ short int *dst = (short int *) data;
+
+ if ((u32)data & 0x1)
+ panic("unaligned pointer to readsw");
+
+ while (len-- > 0)
+ *dst++ = *src;
+
+}
+
+/*
+ * __raw_writesw - read words a short at a time
+ * @addr: source address
+ * @data: data address
+ * @len: number of shorts to read
+ */
+void __raw_writesw(void __iomem *addr, const void *data, int len)
+{
+ const short int *src = (short int *)data;
+ volatile short int *dst = (short int *)addr;
+
+ if ((u32)data & 0x1)
+ panic("unaligned pointer to writesw");
+
+ while (len-- > 0)
+ *dst = *src++;
+
+
+}
+
+/* Pretty sure len is pre-adjusted for the length of the access already */
+void __raw_readsl(const void __iomem *addr, void *data, int len)
+{
+ const volatile long *src = (long *) addr;
+ long *dst = (long *) data;
+
+ if ((u32)data & 0x3)
+ panic("unaligned pointer to readsl");
+
+ while (len-- > 0)
+ *dst++ = *src;
+
+
+}
+
+void __raw_writesl(void __iomem *addr, const void *data, int len)
+{
+ const long *src = (long *)data;
+ volatile long *dst = (long *)addr;
+
+ if ((u32)data & 0x3)
+ panic("unaligned pointer to writesl");
+
+ while (len-- > 0)
+ *dst = *src++;
+
+
+}
diff --git a/arch/hexagon/lib/memcpy.S b/arch/hexagon/lib/memcpy.S
new file mode 100644
index 0000000..2101c33
--- /dev/null
+++ b/arch/hexagon/lib/memcpy.S
@@ -0,0 +1,543 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * Description
+ *
+ * library function for memcpy where length bytes are copied from
+ * ptr_in to ptr_out. ptr_out is returned unchanged.
+ * Allows any combination of alignment on input and output pointers
+ * and length from 0 to 2^32-1
+ *
+ * Restrictions
+ * The arrays should not overlap, the program will produce undefined output
+ * if they do.
+ * For blocks less than 16 bytes a byte by byte copy is performed. For
+ * 8byte alignments, and length multiples, a dword copy is performed up to
+ * 96bytes
+ * History
+ *
+ * DJH 5/15/09 Initial version 1.0
+ * DJH 6/ 1/09 Version 1.1 modified ABI to inlcude R16-R19
+ * DJH 7/12/09 Version 1.2 optimized codesize down to 760 was 840
+ * DJH 10/14/09 Version 1.3 added special loop for aligned case, was
+ * overreading bloated codesize back up to 892
+ * DJH 4/20/10 Version 1.4 fixed Ldword_loop_epilog loop to prevent loads
+ * occuring if only 1 left outstanding, fixes bug
+ * # 3888, corrected for all alignments. Peeled off
+ * 1 32byte chunk from kernel loop and extended 8byte
+ * loop at end to solve all combinations and prevent
+ * over read. Fixed Ldword_loop_prolog to prevent
+ * overread for blocks less than 48bytes. Reduced
+ * codesize to 752 bytes
+ * DJH 4/21/10 version 1.5 1.4 fix broke code for input block ends not
+ * aligned to dword boundaries,underwriting by 1
+ * byte, added detection for this and fixed. A
+ * little bloat.
+ * DJH 4/23/10 version 1.6 corrected stack error, R20 was not being restored
+ * always, fixed the error of R20 being modified
+ * before it was being saved
+ * Natural c model
+ * ===============
+ * void * memcpy(char * ptr_out, char * ptr_in, int length) {
+ * int i;
+ * if(length) for(i=0; i < length; i++) { ptr_out[i] = ptr_in[i]; }
+ * return(ptr_out);
+ * }
+ *
+ * Optimized memcpy function
+ * =========================
+ * void * memcpy(char * ptr_out, char * ptr_in, int len) {
+ * int i, prolog, kernel, epilog, mask;
+ * u8 offset;
+ * s64 data0, dataF8, data70;
+ *
+ * s64 * ptr8_in;
+ * s64 * ptr8_out;
+ * s32 * ptr4;
+ * s16 * ptr2;
+ *
+ * offset = ((int) ptr_in) & 7;
+ * ptr8_in = (s64 *) &ptr_in[-offset]; //read in the aligned pointers
+ *
+ * data70 = *ptr8_in++;
+ * dataF8 = *ptr8_in++;
+ *
+ * data0 = HEXAGON_P_valignb_PPp(dataF8, data70, offset);
+ *
+ * prolog = 32 - ((int) ptr_out);
+ * mask = 0x7fffffff >> HEXAGON_R_cl0_R(len);
+ * prolog = prolog & mask;
+ * kernel = len - prolog;
+ * epilog = kernel & 0x1F;
+ * kernel = kernel>>5;
+ *
+ * if (prolog & 1) { ptr_out[0] = (u8) data0; data0 >>= 8; ptr_out += 1;}
+ * ptr2 = (s16 *) &ptr_out[0];
+ * if (prolog & 2) { ptr2[0] = (u16) data0; data0 >>= 16; ptr_out += 2;}
+ * ptr4 = (s32 *) &ptr_out[0];
+ * if (prolog & 4) { ptr4[0] = (u32) data0; data0 >>= 32; ptr_out += 4;}
+ *
+ * offset = offset + (prolog & 7);
+ * if (offset >= 8) {
+ * data70 = dataF8;
+ * dataF8 = *ptr8_in++;
+ * }
+ * offset = offset & 0x7;
+ *
+ * prolog = prolog >> 3;
+ * if (prolog) for (i=0; i < prolog; i++) {
+ * data0 = HEXAGON_P_valignb_PPp(dataF8, data70, offset);
+ * ptr8_out = (s64 *) &ptr_out[0]; *ptr8_out = data0; ptr_out += 8;
+ * data70 = dataF8;
+ * dataF8 = *ptr8_in++;
+ * }
+ * if(kernel) { kernel -= 1; epilog += 32; }
+ * if(kernel) for(i=0; i < kernel; i++) {
+ * data0 = HEXAGON_P_valignb_PPp(dataF8, data70, offset);
+ * ptr8_out = (s64 *) &ptr_out[0]; *ptr8_out = data0; ptr_out += 8;
+ * data70 = *ptr8_in++;
+ *
+ * data0 = HEXAGON_P_valignb_PPp(data70, dataF8, offset);
+ * ptr8_out = (s64 *) &ptr_out[0]; *ptr8_out = data0; ptr_out += 8;
+ * dataF8 = *ptr8_in++;
+ *
+ * data0 = HEXAGON_P_valignb_PPp(dataF8, data70, offset);
+ * ptr8_out = (s64 *) &ptr_out[0]; *ptr8_out = data0; ptr_out += 8;
+ * data70 = *ptr8_in++;
+ *
+ * data0 = HEXAGON_P_valignb_PPp(data70, dataF8, offset);
+ * ptr8_out = (s64 *) &ptr_out[0]; *ptr8_out = data0; ptr_out += 8;
+ * dataF8 = *ptr8_in++;
+ * }
+ * epilogdws = epilog >> 3;
+ * if (epilogdws) for (i=0; i < epilogdws; i++) {
+ * data0 = HEXAGON_P_valignb_PPp(dataF8, data70, offset);
+ * ptr8_out = (s64 *) &ptr_out[0]; *ptr8_out = data0; ptr_out += 8;
+ * data70 = dataF8;
+ * dataF8 = *ptr8_in++;
+ * }
+ * data0 = HEXAGON_P_valignb_PPp(dataF8, data70, offset);
+ *
+ * ptr4 = (s32 *) &ptr_out[0];
+ * if (epilog & 4) { ptr4[0] = (u32) data0; data0 >>= 32; ptr_out += 4;}
+ * ptr2 = (s16 *) &ptr_out[0];
+ * if (epilog & 2) { ptr2[0] = (u16) data0; data0 >>= 16; ptr_out += 2;}
+ * if (epilog & 1) { *ptr_out++ = (u8) data0; }
+ *
+ * return(ptr_out - length);
+ * }
+ *
+ * Codesize : 784 bytes
+ */
+
+
+#define ptr_out R0 /* destination pounter */
+#define ptr_in R1 /* source pointer */
+#define len R2 /* length of copy in bytes */
+
+#define data70 R13:12 /* lo 8 bytes of non-aligned transfer */
+#define dataF8 R11:10 /* hi 8 bytes of non-aligned transfer */
+#define ldata0 R7:6 /* even 8 bytes chunks */
+#define ldata1 R25:24 /* odd 8 bytes chunks */
+#define data1 R7 /* lower 8 bytes of ldata1 */
+#define data0 R6 /* lower 8 bytes of ldata0 */
+
+#define ifbyte p0 /* if transfer has bytes in epilog/prolog */
+#define ifhword p0 /* if transfer has shorts in epilog/prolog */
+#define ifword p0 /* if transfer has words in epilog/prolog */
+#define noprolog p0 /* no prolog, xfer starts at 32byte */
+#define nokernel p1 /* no 32byte multiple block in the transfer */
+#define noepilog p0 /* no epilog, xfer ends on 32byte boundary */
+#define align p2 /* alignment of input rel to 8byte boundary */
+#define kernel1 p0 /* kernel count == 1 */
+
+#define dalign R25 /* rel alignment of input to output data */
+#define star3 R16 /* number bytes in prolog - dwords */
+#define rest R8 /* length - prolog bytes */
+#define back R7 /* nr bytes > dword boundary in src block */
+#define epilog R3 /* bytes in epilog */
+#define inc R15:14 /* inc kernel by -1 and defetch ptr by 32 */
+#define kernel R4 /* number of 32byte chunks in kernel */
+#define ptr_in_p_128 R5 /* pointer for prefetch of input data */
+#define mask R8 /* mask used to determine prolog size */
+#define shift R8 /* used to work a shifter to extract bytes */
+#define shift2 R5 /* in epilog to workshifter to extract bytes */
+#define prolog R15 /* bytes in prolog */
+#define epilogdws R15 /* number dwords in epilog */
+#define shiftb R14 /* used to extract bytes */
+#define offset R9 /* same as align in reg */
+#define ptr_out_p_32 R17 /* pointer to output dczero */
+#define align888 R14 /* if simple dword loop can be used */
+#define len8 R9 /* number of dwords in length */
+#define over R20 /* nr of bytes > last inp buf dword boundary */
+
+#define ptr_in_p_128kernel R5:4 /* packed fetch pointer & kernel cnt */
+
+ .section .text
+ .p2align 4
+ .global memcpy
+ .type memcpy, @function
+memcpy:
+{
+ p2 = cmp.eq(len, #0); /* =0 */
+ align888 = or(ptr_in, ptr_out); /* %8 < 97 */
+ p0 = cmp.gtu(len, #23); /* %1, <24 */
+ p1 = cmp.eq(ptr_in, ptr_out); /* attempt to overwrite self */
+}
+{
+ p1 = or(p2, p1);
+ p3 = cmp.gtu(len, #95); /* %8 < 97 */
+ align888 = or(align888, len); /* %8 < 97 */
+ len8 = lsr(len, #3); /* %8 < 97 */
+}
+{
+ dcfetch(ptr_in); /* zero/ptrin=ptrout causes fetch */
+ p2 = bitsclr(align888, #7); /* %8 < 97 */
+ if(p1) jumpr r31; /* =0 */
+}
+{
+ p2 = and(p2,!p3); /* %8 < 97 */
+ if (p2.new) len = add(len, #-8); /* %8 < 97 */
+ if (p2.new) jump:NT .Ldwordaligned; /* %8 < 97 */
+}
+{
+ if(!p0) jump .Lbytes23orless; /* %1, <24 */
+ mask.l = #LO(0x7fffffff);
+ /* all bytes before line multiples of data */
+ prolog = sub(#0, ptr_out);
+}
+{
+ /* save r31 on stack, decrement sp by 16 */
+ allocframe(#24);
+ mask.h = #HI(0x7fffffff);
+ ptr_in_p_128 = add(ptr_in, #32);
+ back = cl0(len);
+}
+{
+ memd(sp+#0) = R17:16; /* save r16,r17 on stack6 */
+ r31.l = #LO(.Lmemcpy_return); /* set up final return pointer */
+ prolog &= lsr(mask, back);
+ offset = and(ptr_in, #7);
+}
+{
+ memd(sp+#8) = R25:24; /* save r25,r24 on stack */
+ dalign = sub(ptr_out, ptr_in);
+ r31.h = #HI(.Lmemcpy_return); /* set up final return pointer */
+}
+{
+ /* see if there if input buffer end if aligned */
+ over = add(len, ptr_in);
+ back = add(len, offset);
+ memd(sp+#16) = R21:20; /* save r20,r21 on stack */
+}
+{
+ noprolog = bitsclr(prolog, #7);
+ prolog = and(prolog, #31);
+ dcfetch(ptr_in_p_128);
+ ptr_in_p_128 = add(ptr_in_p_128, #32);
+}
+{
+ kernel = sub(len, prolog);
+ shift = asl(prolog, #3);
+ star3 = and(prolog, #7);
+ ptr_in = and(ptr_in, #-8);
+}
+{
+ prolog = lsr(prolog, #3);
+ epilog = and(kernel, #31);
+ ptr_out_p_32 = add(ptr_out, prolog);
+ over = and(over, #7);
+}
+{
+ p3 = cmp.gtu(back, #8);
+ kernel = lsr(kernel, #5);
+ dcfetch(ptr_in_p_128);
+ ptr_in_p_128 = add(ptr_in_p_128, #32);
+}
+{
+ p1 = cmp.eq(prolog, #0);
+ if(!p1.new) prolog = add(prolog, #1);
+ dcfetch(ptr_in_p_128); /* reserve the line 64bytes on */
+ ptr_in_p_128 = add(ptr_in_p_128, #32);
+}
+{
+ nokernel = cmp.eq(kernel,#0);
+ dcfetch(ptr_in_p_128); /* reserve the line 64bytes on */
+ ptr_in_p_128 = add(ptr_in_p_128, #32);
+ shiftb = and(shift, #8);
+}
+{
+ dcfetch(ptr_in_p_128); /* reserve the line 64bytes on */
+ ptr_in_p_128 = add(ptr_in_p_128, #32);
+ if(nokernel) jump .Lskip64;
+ p2 = cmp.eq(kernel, #1); /* skip ovr if kernel == 0 */
+}
+{
+ dczeroa(ptr_out_p_32);
+ /* don't advance pointer */
+ if(!p2) ptr_out_p_32 = add(ptr_out_p_32, #32);
+}
+{
+ dalign = and(dalign, #31);
+ dczeroa(ptr_out_p_32);
+}
+.Lskip64:
+{
+ data70 = memd(ptr_in++#16);
+ if(p3) dataF8 = memd(ptr_in+#8);
+ if(noprolog) jump .Lnoprolog32;
+ align = offset;
+}
+/* upto initial 7 bytes */
+{
+ ldata0 = valignb(dataF8, data70, align);
+ ifbyte = tstbit(shift,#3);
+ offset = add(offset, star3);
+}
+{
+ if(ifbyte) memb(ptr_out++#1) = data0;
+ ldata0 = lsr(ldata0, shiftb);
+ shiftb = and(shift, #16);
+ ifhword = tstbit(shift,#4);
+}
+{
+ if(ifhword) memh(ptr_out++#2) = data0;
+ ldata0 = lsr(ldata0, shiftb);
+ ifword = tstbit(shift,#5);
+ p2 = cmp.gtu(offset, #7);
+}
+{
+ if(ifword) memw(ptr_out++#4) = data0;
+ if(p2) data70 = dataF8;
+ if(p2) dataF8 = memd(ptr_in++#8); /* another 8 bytes */
+ align = offset;
+}
+.Lnoprolog32:
+{
+ p3 = sp1loop0(.Ldword_loop_prolog, prolog)
+ rest = sub(len, star3); /* whats left after the loop */
+ p0 = cmp.gt(over, #0);
+}
+ if(p0) rest = add(rest, #16);
+.Ldword_loop_prolog:
+{
+ if(p3) memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(dataF8, data70, align);
+ p0 = cmp.gt(rest, #16);
+}
+{
+ data70 = dataF8;
+ if(p0) dataF8 = memd(ptr_in++#8);
+ rest = add(rest, #-8);
+}:endloop0
+.Lkernel:
+{
+ /* kernel is at least 32bytes */
+ p3 = cmp.gtu(kernel, #0);
+ /* last itn. remove edge effects */
+ if(p3.new) kernel = add(kernel, #-1);
+ /* dealt with in last dword loop */
+ if(p3.new) epilog = add(epilog, #32);
+}
+{
+ nokernel = cmp.eq(kernel, #0); /* after adjustment, recheck */
+ if(nokernel.new) jump:NT .Lepilog; /* likely not taken */
+ inc = combine(#32, #-1);
+ p3 = cmp.gtu(dalign, #24);
+}
+{
+ if(p3) jump .Lodd_alignment;
+}
+{
+ loop0(.Loword_loop_25to31, kernel);
+ kernel1 = cmp.gtu(kernel, #1);
+ rest = kernel;
+}
+ .falign
+.Loword_loop_25to31:
+{
+ dcfetch(ptr_in_p_128); /* prefetch 4 lines ahead */
+ if(kernel1) ptr_out_p_32 = add(ptr_out_p_32, #32);
+}
+{
+ dczeroa(ptr_out_p_32); /* reserve the next 32bytes in cache */
+ p3 = cmp.eq(kernel, rest);
+}
+{
+ /* kernel -= 1 */
+ ptr_in_p_128kernel = vaddw(ptr_in_p_128kernel, inc);
+ /* kill write on first iteration */
+ if(!p3) memd(ptr_out++#8) = ldata1;
+ ldata1 = valignb(dataF8, data70, align);
+ data70 = memd(ptr_in++#8);
+}
+{
+ memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(data70, dataF8, align);
+ dataF8 = memd(ptr_in++#8);
+}
+{
+ memd(ptr_out++#8) = ldata1;
+ ldata1 = valignb(dataF8, data70, align);
+ data70 = memd(ptr_in++#8);
+}
+{
+ memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(data70, dataF8, align);
+ dataF8 = memd(ptr_in++#8);
+ kernel1 = cmp.gtu(kernel, #1);
+}:endloop0
+{
+ memd(ptr_out++#8) = ldata1;
+ jump .Lepilog;
+}
+.Lodd_alignment:
+{
+ loop0(.Loword_loop_00to24, kernel);
+ kernel1 = cmp.gtu(kernel, #1);
+ rest = add(kernel, #-1);
+}
+ .falign
+.Loword_loop_00to24:
+{
+ dcfetch(ptr_in_p_128); /* prefetch 4 lines ahead */
+ ptr_in_p_128kernel = vaddw(ptr_in_p_128kernel, inc);
+ if(kernel1) ptr_out_p_32 = add(ptr_out_p_32, #32);
+}
+{
+ dczeroa(ptr_out_p_32); /* reserve the next 32bytes in cache */
+}
+{
+ memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(dataF8, data70, align);
+ data70 = memd(ptr_in++#8);
+}
+{
+ memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(data70, dataF8, align);
+ dataF8 = memd(ptr_in++#8);
+}
+{
+ memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(dataF8, data70, align);
+ data70 = memd(ptr_in++#8);
+}
+{
+ memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(data70, dataF8, align);
+ dataF8 = memd(ptr_in++#8);
+ kernel1 = cmp.gtu(kernel, #1);
+}:endloop0
+.Lepilog:
+{
+ noepilog = cmp.eq(epilog,#0);
+ epilogdws = lsr(epilog, #3);
+ kernel = and(epilog, #7);
+}
+{
+ if(noepilog) jumpr r31;
+ if(noepilog) ptr_out = sub(ptr_out, len);
+ p3 = cmp.eq(epilogdws, #0);
+ shift2 = asl(epilog, #3);
+}
+{
+ shiftb = and(shift2, #32);
+ ifword = tstbit(epilog,#2);
+ if(p3) jump .Lepilog60;
+ if(!p3) epilog = add(epilog, #-16);
+}
+{
+ loop0(.Ldword_loop_epilog, epilogdws);
+ /* stop criteria is lsbs unless = 0 then its 8 */
+ p3 = cmp.eq(kernel, #0);
+ if(p3.new) kernel= #8;
+ p1 = cmp.gt(over, #0);
+}
+ /* if not aligned to end of buffer execute 1 more iteration */
+ if(p1) kernel= #0;
+.Ldword_loop_epilog:
+{
+ memd(ptr_out++#8) = ldata0;
+ ldata0 = valignb(dataF8, data70, align);
+ p3 = cmp.gt(epilog, kernel);
+}
+{
+ data70 = dataF8;
+ if(p3) dataF8 = memd(ptr_in++#8);
+ epilog = add(epilog, #-8);
+}:endloop0
+/* copy last 7 bytes */
+.Lepilog60:
+{
+ if(ifword) memw(ptr_out++#4) = data0;
+ ldata0 = lsr(ldata0, shiftb);
+ ifhword = tstbit(epilog,#1);
+ shiftb = and(shift2, #16);
+}
+{
+ if(ifhword) memh(ptr_out++#2) = data0;
+ ldata0 = lsr(ldata0, shiftb);
+ ifbyte = tstbit(epilog,#0);
+ if(ifbyte.new) len = add(len, #-1);
+}
+{
+ if(ifbyte) memb(ptr_out) = data0;
+ ptr_out = sub(ptr_out, len); /* return dest pointer */
+ jumpr r31;
+}
+/* do byte copy for small n */
+.Lbytes23orless:
+{
+ p3 = sp1loop0(.Lbyte_copy, len);
+ len = add(len, #-1);
+}
+.Lbyte_copy:
+{
+ data0 = memb(ptr_in++#1);
+ if(p3) memb(ptr_out++#1) = data0;
+}:endloop0
+{
+ memb(ptr_out) = data0;
+ ptr_out = sub(ptr_out, len);
+ jumpr r31;
+}
+/* do dword copies for aligned in, out and length */
+.Ldwordaligned:
+{
+ p3 = sp1loop0(.Ldword_copy, len8);
+}
+.Ldword_copy:
+{
+ if(p3) memd(ptr_out++#8) = ldata0;
+ ldata0 = memd(ptr_in++#8);
+}:endloop0
+{
+ memd(ptr_out) = ldata0;
+ ptr_out = sub(ptr_out, len);
+ jumpr r31; /* return to function caller */
+}
+.Lmemcpy_return:
+ r21:20 = memd(sp+#16); /* restore r20+r21 */
+{
+ r25:24 = memd(sp+#8); /* restore r24+r25 */
+ r17:16 = memd(sp+#0); /* restore r16+r17 */
+}
+ deallocframe; /* restore r31 and incrment stack by 16 */
+ jumpr r31
diff --git a/arch/hexagon/lib/memset.S b/arch/hexagon/lib/memset.S
new file mode 100644
index 0000000..26d9614
--- /dev/null
+++ b/arch/hexagon/lib/memset.S
@@ -0,0 +1,315 @@
+/*
+ * Copyright (c) 2011 Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+
+/* HEXAGON assembly optimized memset */
+/* Replaces the standard library function memset */
+
+
+ .macro HEXAGON_OPT_FUNC_BEGIN name
+ .text
+ .p2align 4
+ .globl \name
+ .type \name, @function
+\name:
+ .endm
+
+ .macro HEXAGON_OPT_FUNC_FINISH name
+ .size \name, . - \name
+ .endm
+
+/* FUNCTION: memset (v2 version) */
+#if __HEXAGON_ARCH__ < 3
+HEXAGON_OPT_FUNC_BEGIN memset
+ {
+ r6 = #8
+ r7 = extractu(r0, #3 , #0)
+ p0 = cmp.eq(r2, #0)
+ p1 = cmp.gtu(r2, #7)
+ }
+ {
+ r4 = vsplatb(r1)
+ r8 = r0 /* leave r0 intact for return val */
+ r9 = sub(r6, r7) /* bytes until double alignment */
+ if p0 jumpr r31 /* count == 0, so return */
+ }
+ {
+ r3 = #0
+ r7 = #0
+ p0 = tstbit(r9, #0)
+ if p1 jump 2f /* skip byte loop */
+ }
+
+/* less than 8 bytes to set, so just set a byte at a time and return */
+
+ loop0(1f, r2) /* byte loop */
+ .falign
+1: /* byte loop */
+ {
+ memb(r8++#1) = r4
+ }:endloop0
+ jumpr r31
+ .falign
+2: /* skip byte loop */
+ {
+ r6 = #1
+ p0 = tstbit(r9, #1)
+ p1 = cmp.eq(r2, #1)
+ if !p0 jump 3f /* skip initial byte store */
+ }
+ {
+ memb(r8++#1) = r4
+ r3:2 = sub(r3:2, r7:6)
+ if p1 jumpr r31
+ }
+ .falign
+3: /* skip initial byte store */
+ {
+ r6 = #2
+ p0 = tstbit(r9, #2)
+ p1 = cmp.eq(r2, #2)
+ if !p0 jump 4f /* skip initial half store */
+ }
+ {
+ memh(r8++#2) = r4
+ r3:2 = sub(r3:2, r7:6)
+ if p1 jumpr r31
+ }
+ .falign
+4: /* skip initial half store */
+ {
+ r6 = #4
+ p0 = cmp.gtu(r2, #7)
+ p1 = cmp.eq(r2, #4)
+ if !p0 jump 5f /* skip initial word store */
+ }
+ {
+ memw(r8++#4) = r4
+ r3:2 = sub(r3:2, r7:6)
+ p0 = cmp.gtu(r2, #11)
+ if p1 jumpr r31
+ }
+ .falign
+5: /* skip initial word store */
+ {
+ r10 = lsr(r2, #3)
+ p1 = cmp.eq(r3, #1)
+ if !p0 jump 7f /* skip double loop */
+ }
+ {
+ r5 = r4
+ r6 = #8
+ loop0(6f, r10) /* double loop */
+ }
+
+/* set bytes a double word at a time */
+
+ .falign
+6: /* double loop */
+ {
+ memd(r8++#8) = r5:4
+ r3:2 = sub(r3:2, r7:6)
+ p1 = cmp.eq(r2, #8)
+ }:endloop0
+ .falign
+7: /* skip double loop */
+ {
+ p0 = tstbit(r2, #2)
+ if p1 jumpr r31
+ }
+ {
+ r6 = #4
+ p0 = tstbit(r2, #1)
+ p1 = cmp.eq(r2, #4)
+ if !p0 jump 8f /* skip final word store */
+ }
+ {
+ memw(r8++#4) = r4
+ r3:2 = sub(r3:2, r7:6)
+ if p1 jumpr r31
+ }
+ .falign
+8: /* skip final word store */
+ {
+ p1 = cmp.eq(r2, #2)
+ if !p0 jump 9f /* skip final half store */
+ }
+ {
+ memh(r8++#2) = r4
+ if p1 jumpr r31
+ }
+ .falign
+9: /* skip final half store */
+ {
+ memb(r8++#1) = r4
+ jumpr r31
+ }
+HEXAGON_OPT_FUNC_FINISH memset
+#endif
+
+
+/* FUNCTION: memset (v3 and higher version) */
+#if __HEXAGON_ARCH__ >= 3
+HEXAGON_OPT_FUNC_BEGIN memset
+ {
+ r7=vsplatb(r1)
+ r6 = r0
+ if (r2==#0) jump:nt .L1
+ }
+ {
+ r5:4=combine(r7,r7)
+ p0 = cmp.gtu(r2,#8)
+ if (p0.new) jump:nt .L3
+ }
+ {
+ r3 = r0
+ loop0(.L47,r2)
+ }
+ .falign
+.L47:
+ {
+ memb(r3++#1) = r1
+ }:endloop0 /* start=.L47 */
+ jumpr r31
+.L3:
+ {
+ p0 = tstbit(r0,#0)
+ if (!p0.new) jump:nt .L8
+ p1 = cmp.eq(r2, #1)
+ }
+ {
+ r6 = add(r0, #1)
+ r2 = add(r2,#-1)
+ memb(r0) = r1
+ if (p1) jump .L1
+ }
+.L8:
+ {
+ p0 = tstbit(r6,#1)
+ if (!p0.new) jump:nt .L10
+ }
+ {
+ r2 = add(r2,#-2)
+ memh(r6++#2) = r7
+ p0 = cmp.eq(r2, #2)
+ if (p0.new) jump:nt .L1
+ }
+.L10:
+ {
+ p0 = tstbit(r6,#2)
+ if (!p0.new) jump:nt .L12
+ }
+ {
+ r2 = add(r2,#-4)
+ memw(r6++#4) = r7
+ p0 = cmp.eq(r2, #4)
+ if (p0.new) jump:nt .L1
+ }
+.L12:
+ {
+ p0 = cmp.gtu(r2,#127)
+ if (!p0.new) jump:nt .L14
+ }
+ r3 = and(r6,#31)
+ if (r3==#0) jump:nt .L17
+ {
+ memd(r6++#8) = r5:4
+ r2 = add(r2,#-8)
+ }
+ r3 = and(r6,#31)
+ if (r3==#0) jump:nt .L17
+ {
+ memd(r6++#8) = r5:4
+ r2 = add(r2,#-8)
+ }
+ r3 = and(r6,#31)
+ if (r3==#0) jump:nt .L17
+ {
+ memd(r6++#8) = r5:4
+ r2 = add(r2,#-8)
+ }
+.L17:
+ {
+ r3 = lsr(r2,#5)
+ if (r1!=#0) jump:nt .L18
+ }
+ {
+ r8 = r3
+ r3 = r6
+ loop0(.L46,r3)
+ }
+ .falign
+.L46:
+ {
+ dczeroa(r6)
+ r6 = add(r6,#32)
+ r2 = add(r2,#-32)
+ }:endloop0 /* start=.L46 */
+.L14:
+ {
+ p0 = cmp.gtu(r2,#7)
+ if (!p0.new) jump:nt .L28
+ r8 = lsr(r2,#3)
+ }
+ loop0(.L44,r8)
+ .falign
+.L44:
+ {
+ memd(r6++#8) = r5:4
+ r2 = add(r2,#-8)
+ }:endloop0 /* start=.L44 */
+.L28:
+ {
+ p0 = tstbit(r2,#2)
+ if (!p0.new) jump:nt .L33
+ }
+ {
+ r2 = add(r2,#-4)
+ memw(r6++#4) = r7
+ }
+.L33:
+ {
+ p0 = tstbit(r2,#1)
+ if (!p0.new) jump:nt .L35
+ }
+ {
+ r2 = add(r2,#-2)
+ memh(r6++#2) = r7
+ }
+.L35:
+ p0 = cmp.eq(r2,#1)
+ if (p0) memb(r6) = r1
+.L1:
+ jumpr r31
+.L18:
+ loop0(.L45,r3)
+ .falign
+.L45:
+ dczeroa(r6)
+ {
+ memd(r6++#8) = r5:4
+ r2 = add(r2,#-32)
+ }
+ memd(r6++#8) = r5:4
+ memd(r6++#8) = r5:4
+ {
+ memd(r6++#8) = r5:4
+ }:endloop0 /* start=.L45 */
+ jump .L14
+HEXAGON_OPT_FUNC_FINISH memset
+#endif
diff --git a/arch/hexagon/mm/Makefile b/arch/hexagon/mm/Makefile
new file mode 100644
index 0000000..1a0be4d
--- /dev/null
+++ b/arch/hexagon/mm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Hexagon memory management subsystem
+#
+
+obj-y := init.o pgalloc.o ioremap.o uaccess.o vm_fault.o cache.o
+obj-y += copy_to_user.o copy_from_user.o strnlen_user.o vm_tlb.o
diff --git a/arch/hexagon/mm/cache.c b/arch/hexagon/mm/cache.c
new file mode 100644
index 0000000..c5cf6ee
--- /dev/null
+++ b/arch/hexagon/mm/cache.c
@@ -0,0 +1,128 @@
+/*
+ * Cache management functions for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+#include <asm/hexagon_vm.h>
+
+#define spanlines(start, end) \
+ (((end - (start & ~(LINESIZE - 1))) >> LINEBITS) + 1)
+
+void flush_dcache_range(unsigned long start, unsigned long end)
+{
+ unsigned long lines = spanlines(start, end-1);
+ unsigned long i, flags;
+
+ start &= ~(LINESIZE - 1);
+
+ local_irq_save(flags);
+
+ for (i = 0; i < lines; i++) {
+ __asm__ __volatile__ (
+ " dccleaninva(%0); "
+ :
+ : "r" (start)
+ );
+ start += LINESIZE;
+ }
+ local_irq_restore(flags);
+}
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+ unsigned long lines = spanlines(start, end-1);
+ unsigned long i, flags;
+
+ start &= ~(LINESIZE - 1);
+
+ local_irq_save(flags);
+
+ for (i = 0; i < lines; i++) {
+ __asm__ __volatile__ (
+ " dccleana(%0); "
+ " icinva(%0); "
+ :
+ : "r" (start)
+ );
+ start += LINESIZE;
+ }
+ __asm__ __volatile__ (
+ "isync"
+ );
+ local_irq_restore(flags);
+}
+
+void hexagon_clean_dcache_range(unsigned long start, unsigned long end)
+{
+ unsigned long lines = spanlines(start, end-1);
+ unsigned long i, flags;
+
+ start &= ~(LINESIZE - 1);
+
+ local_irq_save(flags);
+
+ for (i = 0; i < lines; i++) {
+ __asm__ __volatile__ (
+ " dccleana(%0); "
+ :
+ : "r" (start)
+ );
+ start += LINESIZE;
+ }
+ local_irq_restore(flags);
+}
+
+void hexagon_inv_dcache_range(unsigned long start, unsigned long end)
+{
+ unsigned long lines = spanlines(start, end-1);
+ unsigned long i, flags;
+
+ start &= ~(LINESIZE - 1);
+
+ local_irq_save(flags);
+
+ for (i = 0; i < lines; i++) {
+ __asm__ __volatile__ (
+ " dcinva(%0); "
+ :
+ : "r" (start)
+ );
+ start += LINESIZE;
+ }
+ local_irq_restore(flags);
+}
+
+
+
+
+/*
+ * This is just really brutal and shouldn't be used anyways,
+ * especially on V2. Left here just in case.
+ */
+void flush_cache_all_hexagon(void)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ __vmcache_ickill();
+ __vmcache_dckill();
+ __vmcache_l2kill();
+ local_irq_restore(flags);
+ mb();
+}
diff --git a/arch/hexagon/mm/copy_from_user.S b/arch/hexagon/mm/copy_from_user.S
new file mode 100644
index 0000000..8eb1d4d
--- /dev/null
+++ b/arch/hexagon/mm/copy_from_user.S
@@ -0,0 +1,114 @@
+/*
+ * User memory copy functions for kernel
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * The right way to do this involves valignb
+ * The easy way to do this is only speed up src/dest similar alignment.
+ */
+
+/*
+ * Copy to/from user are the same, except that for packets with a load and
+ * a store, I don't know how to tell which kind of exception we got.
+ * Therefore, we duplicate the function, and handle faulting addresses
+ * differently for each function
+ */
+
+/*
+ * copy from user: loads can fault
+ */
+#define src_sav r13
+#define dst_sav r12
+#define src_dst_sav r13:12
+#define d_dbuf r15:14
+#define w_dbuf r15
+
+#define dst r0
+#define src r1
+#define bytes r2
+#define loopcount r5
+
+#define FUNCNAME __copy_from_user_hexagon
+#include "copy_user_template.S"
+
+ /* LOAD FAULTS from COPY_FROM_USER */
+
+ /* Alignment loop. r2 has been updated. Return it. */
+ .falign
+1009:
+2009:
+4009:
+ {
+ r0 = r2
+ jumpr r31
+ }
+ /* Normal copy loops. Do epilog. Use src-src_sav to compute distance */
+ /* X - (A - B) == X + B - A */
+ .falign
+8089:
+ {
+ memd(dst) = d_dbuf
+ r2 += sub(src_sav,src)
+ }
+ {
+ r0 = r2
+ jumpr r31
+ }
+ .falign
+4089:
+ {
+ memw(dst) = w_dbuf
+ r2 += sub(src_sav,src)
+ }
+ {
+ r0 = r2
+ jumpr r31
+ }
+ .falign
+2089:
+ {
+ memh(dst) = w_dbuf
+ r2 += sub(src_sav,src)
+ }
+ {
+ r0 = r2
+ jumpr r31
+ }
+ .falign
+1089:
+ {
+ memb(dst) = w_dbuf
+ r2 += sub(src_sav,src)
+ }
+ {
+ r0 = r2
+ jumpr r31
+ }
+
+ /* COPY FROM USER: only loads can fail */
+
+ .section __ex_table,"a"
+ .long 1000b,1009b
+ .long 2000b,2009b
+ .long 4000b,4009b
+ .long 8080b,8089b
+ .long 4080b,4089b
+ .long 2080b,2089b
+ .long 1080b,1089b
+ .previous
diff --git a/arch/hexagon/mm/copy_to_user.S b/arch/hexagon/mm/copy_to_user.S
new file mode 100644
index 0000000..cb9740e
--- /dev/null
+++ b/arch/hexagon/mm/copy_to_user.S
@@ -0,0 +1,92 @@
+/*
+ * User memory copying routines for the Hexagon Kernel
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/* The right way to do this involves valignb
+ * The easy way to do this is only speed up src/dest similar alignment.
+ */
+
+/*
+ * Copy to/from user are the same, except that for packets with a load and
+ * a store, I don't know how to tell which kind of exception we got.
+ * Therefore, we duplicate the function, and handle faulting addresses
+ * differently for each function
+ */
+
+/*
+ * copy to user: stores can fault
+ */
+#define src_sav r13
+#define dst_sav r12
+#define src_dst_sav r13:12
+#define d_dbuf r15:14
+#define w_dbuf r15
+
+#define dst r0
+#define src r1
+#define bytes r2
+#define loopcount r5
+
+#define FUNCNAME __copy_to_user_hexagon
+#include "copy_user_template.S"
+
+ /* STORE FAULTS from COPY_TO_USER */
+ .falign
+1109:
+2109:
+4109:
+ /* Alignment loop. r2 has been updated. Return it. */
+ {
+ r0 = r2
+ jumpr r31
+ }
+ /* Normal copy loops. Use dst-dst_sav to compute distance */
+ /* dst holds best write, no need to unwind any loops */
+ /* X - (A - B) == X + B - A */
+ .falign
+8189:
+8199:
+4189:
+4199:
+2189:
+2199:
+1189:
+1199:
+ {
+ r2 += sub(dst_sav,dst)
+ }
+ {
+ r0 = r2
+ jumpr r31
+ }
+
+ /* COPY TO USER: only stores can fail */
+ .section __ex_table,"a"
+ .long 1100b,1109b
+ .long 2100b,2109b
+ .long 4100b,4109b
+ .long 8180b,8189b
+ .long 8190b,8199b
+ .long 4180b,4189b
+ .long 4190b,4199b
+ .long 2180b,2189b
+ .long 2190b,2199b
+ .long 1180b,1189b
+ .long 1190b,1199b
+ .previous
diff --git a/arch/hexagon/mm/copy_user_template.S b/arch/hexagon/mm/copy_user_template.S
new file mode 100644
index 0000000..08d7d7b
--- /dev/null
+++ b/arch/hexagon/mm/copy_user_template.S
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/* Numerology:
+ * WXYZ
+ * W: width in bytes
+ * X: Load=0, Store=1
+ * Y: Location 0=preamble,8=loop,9=epilog
+ * Z: Location=0,handler=9
+ */
+ .text
+ .global FUNCNAME
+ .type FUNCNAME, @function
+ .p2align 5
+FUNCNAME:
+ {
+ p0 = cmp.gtu(bytes,#0)
+ if (!p0.new) jump:nt .Ldone
+ r3 = or(dst,src)
+ r4 = xor(dst,src)
+ }
+ {
+ p1 = cmp.gtu(bytes,#15)
+ p0 = bitsclr(r3,#7)
+ if (!p0.new) jump:nt .Loop_not_aligned_8
+ src_dst_sav = combine(src,dst)
+ }
+
+ {
+ loopcount = lsr(bytes,#3)
+ if (!p1) jump .Lsmall
+ }
+ p3=sp1loop0(.Loop8,loopcount)
+.Loop8:
+8080:
+8180:
+ {
+ if (p3) memd(dst++#8) = d_dbuf
+ d_dbuf = memd(src++#8)
+ }:endloop0
+8190:
+ {
+ memd(dst++#8) = d_dbuf
+ bytes -= asl(loopcount,#3)
+ jump .Lsmall
+ }
+
+.Loop_not_aligned_8:
+ {
+ p0 = bitsclr(r4,#7)
+ if (p0.new) jump:nt .Lalign
+ }
+ {
+ p0 = bitsclr(r3,#3)
+ if (!p0.new) jump:nt .Loop_not_aligned_4
+ p1 = cmp.gtu(bytes,#7)
+ }
+
+ {
+ if (!p1) jump .Lsmall
+ loopcount = lsr(bytes,#2)
+ }
+ p3=sp1loop0(.Loop4,loopcount)
+.Loop4:
+4080:
+4180:
+ {
+ if (p3) memw(dst++#4) = w_dbuf
+ w_dbuf = memw(src++#4)
+ }:endloop0
+4190:
+ {
+ memw(dst++#4) = w_dbuf
+ bytes -= asl(loopcount,#2)
+ jump .Lsmall
+ }
+
+.Loop_not_aligned_4:
+ {
+ p0 = bitsclr(r3,#1)
+ if (!p0.new) jump:nt .Loop_not_aligned
+ p1 = cmp.gtu(bytes,#3)
+ }
+
+ {
+ if (!p1) jump .Lsmall
+ loopcount = lsr(bytes,#1)
+ }
+ p3=sp1loop0(.Loop2,loopcount)
+.Loop2:
+2080:
+2180:
+ {
+ if (p3) memh(dst++#2) = w_dbuf
+ w_dbuf = memuh(src++#2)
+ }:endloop0
+2190:
+ {
+ memh(dst++#2) = w_dbuf
+ bytes -= asl(loopcount,#1)
+ jump .Lsmall
+ }
+
+.Loop_not_aligned: /* Works for as small as one byte */
+ p3=sp1loop0(.Loop1,bytes)
+.Loop1:
+1080:
+1180:
+ {
+ if (p3) memb(dst++#1) = w_dbuf
+ w_dbuf = memub(src++#1)
+ }:endloop0
+ /* Done */
+1190:
+ {
+ memb(dst) = w_dbuf
+ jumpr r31
+ r0 = #0
+ }
+
+.Lsmall:
+ {
+ p0 = cmp.gtu(bytes,#0)
+ if (p0.new) jump:nt .Loop_not_aligned
+ }
+.Ldone:
+ {
+ r0 = #0
+ jumpr r31
+ }
+ .falign
+.Lalign:
+1000:
+ {
+ if (p0.new) w_dbuf = memub(src)
+ p0 = tstbit(src,#0)
+ if (!p1) jump .Lsmall
+ }
+1100:
+ {
+ if (p0) memb(dst++#1) = w_dbuf
+ if (p0) bytes = add(bytes,#-1)
+ if (p0) src = add(src,#1)
+ }
+2000:
+ {
+ if (p0.new) w_dbuf = memuh(src)
+ p0 = tstbit(src,#1)
+ if (!p1) jump .Lsmall
+ }
+2100:
+ {
+ if (p0) memh(dst++#2) = w_dbuf
+ if (p0) bytes = add(bytes,#-2)
+ if (p0) src = add(src,#2)
+ }
+4000:
+ {
+ if (p0.new) w_dbuf = memw(src)
+ p0 = tstbit(src,#2)
+ if (!p1) jump .Lsmall
+ }
+4100:
+ {
+ if (p0) memw(dst++#4) = w_dbuf
+ if (p0) bytes = add(bytes,#-4)
+ if (p0) src = add(src,#4)
+ jump FUNCNAME
+ }
+ .size FUNCNAME,.-FUNCNAME
diff --git a/arch/hexagon/mm/init.c b/arch/hexagon/mm/init.c
new file mode 100644
index 0000000..b57d741
--- /dev/null
+++ b/arch/hexagon/mm/init.c
@@ -0,0 +1,276 @@
+/*
+ * Memory subsystem initialization for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <asm/atomic.h>
+#include <linux/highmem.h>
+#include <asm/tlb.h>
+#include <asm/sections.h>
+#include <asm/vm_mmu.h>
+
+/*
+ * Define a startpg just past the end of the kernel image and a lastpg
+ * that corresponds to the end of real or simulated platform memory.
+ */
+#define bootmem_startpg (PFN_UP(((unsigned long) _end) - PAGE_OFFSET))
+
+unsigned long bootmem_lastpg; /* Should be set by platform code */
+
+/* Set as variable to limit PMD copies */
+int max_kernel_seg = 0x303;
+
+/* think this should be (page_size-1) the way it's used...*/
+unsigned long zero_page_mask;
+
+/* indicate pfn's of high memory */
+unsigned long highstart_pfn, highend_pfn;
+
+/* struct mmu_gather defined in asm-generic.h; */
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/* Default cache attribute for newly created page tables */
+unsigned long _dflt_cache_att = CACHEDEF;
+
+/*
+ * The current "generation" of kernel map, which should not roll
+ * over until Hell freezes over. Actual bound in years needs to be
+ * calculated to confirm.
+ */
+DEFINE_SPINLOCK(kmap_gen_lock);
+
+/* checkpatch says don't init this to 0. */
+unsigned long long kmap_generation;
+
+/*
+ * mem_init - initializes memory
+ *
+ * Frees up bootmem
+ * Fixes up more stuff for HIGHMEM
+ * Calculates and displays memory available/used
+ */
+void __init mem_init(void)
+{
+ /* No idea where this is actually declared. Seems to evade LXR. */
+ totalram_pages += free_all_bootmem();
+ num_physpages = bootmem_lastpg; /* seriously, what? */
+
+ printk(KERN_INFO "totalram_pages = %ld\n", totalram_pages);
+
+ /*
+ * To-Do: someone somewhere should wipe out the bootmem map
+ * after we're done?
+ */
+
+ /*
+ * This can be moved to some more virtual-memory-specific
+ * initialization hook at some point. Set the init_mm
+ * descriptors "context" value to point to the initial
+ * kernel segment table's physical address.
+ */
+ init_mm.context.ptbase = __pa(init_mm.pgd);
+}
+
+/*
+ * free_initmem - frees memory used by stuff declared with __init
+ *
+ * Todo: free pages between __init_begin and __init_end; possibly
+ * some devtree related stuff as well.
+ */
+void __init_refok free_initmem(void)
+{
+}
+
+/*
+ * free_initrd_mem - frees... initrd memory.
+ * @start - start of init memory
+ * @end - end of init memory
+ *
+ * Apparently has to be passed the address of the initrd memory.
+ *
+ * Wrapped by #ifdef CONFIG_BLKDEV_INITRD
+ */
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+}
+
+void sync_icache_dcache(pte_t pte)
+{
+ unsigned long addr;
+ struct page *page;
+
+ page = pte_page(pte);
+ addr = (unsigned long) page_address(page);
+
+ __vmcache_idsync(addr, PAGE_SIZE);
+}
+
+/*
+ * In order to set up page allocator "nodes",
+ * somebody has to call free_area_init() for UMA.
+ *
+ * In this mode, we only have one pg_data_t
+ * structure: contig_mem_data.
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_sizes[MAX_NR_ZONES] = {0, };
+
+ /*
+ * This is not particularly well documented anywhere, but
+ * give ZONE_NORMAL all the memory, including the big holes
+ * left by the kernel+bootmem_map which are already left as reserved
+ * in the bootmem_map; free_area_init should see those bits and
+ * adjust accordingly.
+ */
+
+ zones_sizes[ZONE_NORMAL] = max_low_pfn;
+
+ free_area_init(zones_sizes); /* sets up the zonelists and mem_map */
+
+ /*
+ * Start of high memory area. Will probably need something more
+ * fancy if we... get more fancy.
+ */
+ high_memory = (void *)((bootmem_lastpg + 1) << PAGE_SHIFT);
+}
+
+#ifndef DMA_RESERVE
+#define DMA_RESERVE (4)
+#endif
+
+#define DMA_CHUNKSIZE (1<<22)
+#define DMA_RESERVED_BYTES (DMA_RESERVE * DMA_CHUNKSIZE)
+
+/*
+ * Pick out the memory size. We look for mem=size,
+ * where size is "size[KkMm]"
+ */
+static int __init early_mem(char *p)
+{
+ unsigned long size;
+ char *endp;
+
+ size = memparse(p, &endp);
+
+ bootmem_lastpg = PFN_DOWN(size);
+
+ return 0;
+}
+early_param("mem", early_mem);
+
+size_t hexagon_coherent_pool_size = (size_t) (DMA_RESERVE << 22);
+
+void __init setup_arch_memory(void)
+{
+ int bootmap_size;
+ /* XXX Todo: this probably should be cleaned up */
+ u32 *segtable = (u32 *) &swapper_pg_dir[0];
+ u32 *segtable_end;
+
+ /*
+ * Set up boot memory allocator
+ *
+ * The Gorman book also talks about these functions.
+ * This needs to change for highmem setups.
+ */
+
+ /* Memory size needs to be a multiple of 16M */
+ bootmem_lastpg = PFN_DOWN((bootmem_lastpg << PAGE_SHIFT) &
+ ~((BIG_KERNEL_PAGE_SIZE) - 1));
+
+ /*
+ * Reserve the top DMA_RESERVE bytes of RAM for DMA (uncached)
+ * memory allocation
+ */
+ bootmap_size = init_bootmem(bootmem_startpg, bootmem_lastpg -
+ PFN_DOWN(DMA_RESERVED_BYTES));
+
+ printk(KERN_INFO "bootmem_startpg: 0x%08lx\n", bootmem_startpg);
+ printk(KERN_INFO "bootmem_lastpg: 0x%08lx\n", bootmem_lastpg);
+ printk(KERN_INFO "bootmap_size: %d\n", bootmap_size);
+ printk(KERN_INFO "max_low_pfn: 0x%08lx\n", max_low_pfn);
+
+ /*
+ * The default VM page tables (will be) populated with
+ * VA=PA+PAGE_OFFSET mapping. We go in and invalidate entries
+ * higher than what we have memory for.
+ */
+
+ /* this is pointer arithmetic; each entry covers 4MB */
+ segtable = segtable + (PAGE_OFFSET >> 22);
+
+ /* this actually only goes to the end of the first gig */
+ segtable_end = segtable + (1<<(30-22));
+
+ /* Move forward to the start of empty pages */
+ segtable += bootmem_lastpg >> (22-PAGE_SHIFT);
+
+ {
+ int i;
+
+ for (i = 1 ; i <= DMA_RESERVE ; i++)
+ segtable[-i] = ((segtable[-i] & __HVM_PTE_PGMASK_4MB)
+ | __HVM_PTE_R | __HVM_PTE_W | __HVM_PTE_X
+ | __HEXAGON_C_UNC << 6
+ | __HVM_PDE_S_4MB);
+ }
+
+ printk(KERN_INFO "clearing segtable from %p to %p\n", segtable,
+ segtable_end);
+ while (segtable < (segtable_end-8))
+ *(segtable++) = __HVM_PDE_S_INVALID;
+ /* stop the pointer at the device I/O 4MB page */
+
+ printk(KERN_INFO "segtable = %p (should be equal to _K_io_map)\n",
+ segtable);
+
+#if 0
+ /* Other half of the early device table from vm_init_segtable. */
+ printk(KERN_INFO "&_K_init_devicetable = 0x%08x\n",
+ (unsigned long) _K_init_devicetable-PAGE_OFFSET);
+ *segtable = ((u32) (unsigned long) _K_init_devicetable-PAGE_OFFSET) |
+ __HVM_PDE_S_4KB;
+ printk(KERN_INFO "*segtable = 0x%08x\n", *segtable);
+#endif
+
+ /*
+ * Free all the memory that wasn't taken up by the bootmap, the DMA
+ * reserve, or kernel itself.
+ */
+ free_bootmem(PFN_PHYS(bootmem_startpg)+bootmap_size,
+ PFN_PHYS(bootmem_lastpg - bootmem_startpg) - bootmap_size -
+ DMA_RESERVED_BYTES);
+
+ /*
+ * The bootmem allocator seemingly just lives to feed memory
+ * to the paging system
+ */
+ printk(KERN_INFO "PAGE_SIZE=%lu\n", PAGE_SIZE);
+ paging_init(); /* See Gorman Book, 2.3 */
+
+ /*
+ * At this point, the page allocator is kind of initialized, but
+ * apparently no pages are available (just like with the bootmem
+ * allocator), and need to be freed themselves via mem_init(),
+ * which is called by start_kernel() later on in the process
+ */
+}
diff --git a/arch/hexagon/mm/ioremap.c b/arch/hexagon/mm/ioremap.c
new file mode 100644
index 0000000..3a37bc3
--- /dev/null
+++ b/arch/hexagon/mm/ioremap.c
@@ -0,0 +1,56 @@
+/*
+ * I/O remap functions for Hexagon
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+
+void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size)
+{
+ unsigned long last_addr, addr;
+ unsigned long offset = phys_addr & ~PAGE_MASK;
+ struct vm_struct *area;
+
+ pgprot_t prot = __pgprot(_PAGE_PRESENT|_PAGE_READ|_PAGE_WRITE
+ |(__HEXAGON_C_DEV << 6));
+
+ last_addr = phys_addr + size - 1;
+
+ /* Wrapping not allowed */
+ if (!size || (last_addr < phys_addr))
+ return NULL;
+
+ /* Rounds up to next page size, including whole-page offset */
+ size = PAGE_ALIGN(offset + size);
+
+ area = get_vm_area(size, VM_IOREMAP);
+ addr = (unsigned long)area->addr;
+
+ if (ioremap_page_range(addr, addr+size, phys_addr, prot)) {
+ vunmap((void *)addr);
+ return NULL;
+ }
+
+ return (void __iomem *) (offset + addr);
+}
+
+void __iounmap(const volatile void __iomem *addr)
+{
+ vunmap((void *) ((unsigned long) addr & PAGE_MASK));
+}
diff --git a/arch/hexagon/mm/pgalloc.c b/arch/hexagon/mm/pgalloc.c
new file mode 100644
index 0000000..b175e2d
--- /dev/null
+++ b/arch/hexagon/mm/pgalloc.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+
+void __init pgtable_cache_init(void)
+{
+}
diff --git a/arch/hexagon/mm/strnlen_user.S b/arch/hexagon/mm/strnlen_user.S
new file mode 100644
index 0000000..5c6a16c
--- /dev/null
+++ b/arch/hexagon/mm/strnlen_user.S
@@ -0,0 +1,139 @@
+/*
+ * User string length functions for kernel
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define isrc r0
+#define max r1 /* Do not change! */
+
+#define end r2
+#define tmp1 r3
+
+#define obo r6 /* off-by-one */
+#define start r7
+#define mod8 r8
+#define dbuf r15:14
+#define dcmp r13:12
+
+/*
+ * The vector mask version of this turned out *really* badly.
+ * The hardware loop version also turned out *really* badly.
+ * Seems straight pointer arithmetic basically wins here.
+ */
+
+#define fname __strnlen_user
+
+ .text
+ .global fname
+ .type fname, @function
+ .p2align 5 /* why? */
+fname:
+ {
+ mod8 = and(isrc,#7);
+ end = add(isrc,max);
+ start = isrc;
+ }
+ {
+ P0 = cmp.eq(mod8,#0);
+ mod8 = and(end,#7);
+ dcmp = #0;
+ if (P0.new) jump:t dw_loop; /* fire up the oven */
+ }
+
+alignment_loop:
+fail_1: {
+ tmp1 = memb(start++#1);
+ }
+ {
+ P0 = cmp.eq(tmp1,#0);
+ if (P0.new) jump:nt exit_found;
+ P1 = cmp.gtu(end,start);
+ mod8 = and(start,#7);
+ }
+ {
+ if (!P1) jump exit_error; /* hit the end */
+ P0 = cmp.eq(mod8,#0);
+ }
+ {
+ if (!P0) jump alignment_loop;
+ }
+
+
+
+dw_loop:
+fail_2: {
+ dbuf = memd(start);
+ obo = add(start,#1);
+ }
+ {
+ P0 = vcmpb.eq(dbuf,dcmp);
+ }
+ {
+ tmp1 = P0;
+ P0 = cmp.gtu(end,start);
+ }
+ {
+ tmp1 = ct0(tmp1);
+ mod8 = and(end,#7);
+ if (!P0) jump end_check;
+ }
+ {
+ P0 = cmp.eq(tmp1,#32);
+ if (!P0.new) jump:nt exit_found;
+ if (!P0.new) start = add(obo,tmp1);
+ }
+ {
+ start = add(start,#8);
+ jump dw_loop;
+ } /* might be nice to combine these jumps... */
+
+
+end_check:
+ {
+ P0 = cmp.gt(tmp1,mod8);
+ if (P0.new) jump:nt exit_error; /* neverfound! */
+ start = add(obo,tmp1);
+ }
+
+exit_found:
+ {
+ R0 = sub(start,isrc);
+ jumpr R31;
+ }
+
+exit_error:
+ {
+ R0 = add(max,#1);
+ jumpr R31;
+ }
+
+ /* Uh, what does the "fixup" return here? */
+ .falign
+fix_1:
+ {
+ R0 = #0;
+ jumpr R31;
+ }
+
+ .size fname,.-fname
+
+
+.section __ex_table,"a"
+.long fail_1,fix_1
+.long fail_2,fix_1
+.previous
diff --git a/arch/hexagon/mm/uaccess.c b/arch/hexagon/mm/uaccess.c
new file mode 100644
index 0000000..e748108
--- /dev/null
+++ b/arch/hexagon/mm/uaccess.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * Support for user memory access from kernel. This will
+ * probably be inlined for performance at some point, but
+ * for ease of debug, and to a lesser degree for code size,
+ * we implement here as subroutines.
+ */
+#include <linux/types.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+/*
+ * For clear_user(), exploit previously defined copy_to_user function
+ * and the fact that we've got a handy zero page defined in kernel/head.S
+ *
+ * dczero here would be even faster.
+ */
+__kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count)
+{
+ long uncleared;
+
+ while (count > PAGE_SIZE) {
+ uncleared = __copy_to_user_hexagon(dest, &empty_zero_page,
+ PAGE_SIZE);
+ if (uncleared)
+ return count - (PAGE_SIZE - uncleared);
+ count -= PAGE_SIZE;
+ dest += PAGE_SIZE;
+ }
+ if (count)
+ count = __copy_to_user_hexagon(dest, &empty_zero_page, count);
+
+ return count;
+}
+
+unsigned long clear_user_hexagon(void __user *dest, unsigned long count)
+{
+ if (!access_ok(VERIFY_WRITE, dest, count))
+ return count;
+ else
+ return __clear_user_hexagon(dest, count);
+}
diff --git a/arch/hexagon/mm/vm_fault.c b/arch/hexagon/mm/vm_fault.c
new file mode 100644
index 0000000..c10b76f
--- /dev/null
+++ b/arch/hexagon/mm/vm_fault.c
@@ -0,0 +1,187 @@
+/*
+ * Memory fault handling for Hexagon
+ *
+ * Copyright (c) 2010-2011 Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * Page fault handling for the Hexagon Virtual Machine.
+ * Can also be called by a native port emulating the HVM
+ * execptions.
+ */
+
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+#include <linux/mm.h>
+#include <linux/signal.h>
+#include <linux/module.h>
+#include <linux/hardirq.h>
+
+/*
+ * Decode of hardware exception sends us to one of several
+ * entry points. At each, we generate canonical arguments
+ * for handling by the abstract memory management code.
+ */
+#define FLT_IFETCH -1
+#define FLT_LOAD 0
+#define FLT_STORE 1
+
+
+/*
+ * Canonical page fault handler
+ */
+void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ siginfo_t info;
+ int si_code = SEGV_MAPERR;
+ int fault;
+ const struct exception_table_entry *fixup;
+
+ /*
+ * If we're in an interrupt or have no user context,
+ * then must not take the fault.
+ */
+ if (unlikely(in_interrupt() || !mm))
+ goto no_context;
+
+ local_irq_enable();
+
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+
+ if (vma->vm_start <= address)
+ goto good_area;
+
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+good_area:
+ /* Address space is OK. Now check access rights. */
+ si_code = SEGV_ACCERR;
+
+ switch (cause) {
+ case FLT_IFETCH:
+ if (!(vma->vm_flags & VM_EXEC))
+ goto bad_area;
+ break;
+ case FLT_LOAD:
+ if (!(vma->vm_flags & VM_READ))
+ goto bad_area;
+ break;
+ case FLT_STORE:
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ break;
+ }
+
+ fault = handle_mm_fault(mm, vma, address, (cause > 0));
+
+ /* The most common case -- we are done. */
+ if (likely(!(fault & VM_FAULT_ERROR))) {
+ if (fault & VM_FAULT_MAJOR)
+ current->maj_flt++;
+ else
+ current->min_flt++;
+
+ up_read(&mm->mmap_sem);
+ return;
+ }
+
+ up_read(&mm->mmap_sem);
+
+ /* Handle copyin/out exception cases */
+ if (!user_mode(regs))
+ goto no_context;
+
+ if (fault & VM_FAULT_OOM) {
+ pagefault_out_of_memory();
+ return;
+ }
+
+ /* User-mode address is in the memory map, but we are
+ * unable to fix up the page fault.
+ */
+ if (fault & VM_FAULT_SIGBUS) {
+ info.si_signo = SIGBUS;
+ info.si_code = BUS_ADRERR;
+ }
+ /* Address is not in the memory map */
+ else {
+ info.si_signo = SIGSEGV;
+ info.si_code = SEGV_ACCERR;
+ }
+ info.si_errno = 0;
+ info.si_addr = (void __user *)address;
+ force_sig_info(info.si_code, &info, current);
+ return;
+
+bad_area:
+ up_read(&mm->mmap_sem);
+
+ if (user_mode(regs)) {
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = si_code;
+ info.si_addr = (void *)address;
+ force_sig_info(SIGSEGV, &info, current);
+ return;
+ }
+ /* Kernel-mode fault falls through */
+
+no_context:
+ fixup = search_exception_tables(pt_elr(regs));
+ if (fixup) {
+ pt_set_elr(regs, fixup->fixup);
+ return;
+ }
+
+ /* Things are looking very, very bad now */
+ bust_spinlocks(1);
+ printk(KERN_EMERG "Unable to handle kernel paging request at "
+ "virtual address 0x%08lx, regs %p\n", address, regs);
+ die("Bad Kernel VA", regs, SIGKILL);
+}
+
+
+void read_protection_fault(struct pt_regs *regs)
+{
+ unsigned long badvadr = pt_badva(regs);
+
+ do_page_fault(badvadr, FLT_LOAD, regs);
+}
+
+void write_protection_fault(struct pt_regs *regs)
+{
+ unsigned long badvadr = pt_badva(regs);
+
+ do_page_fault(badvadr, FLT_STORE, regs);
+}
+
+void execute_protection_fault(struct pt_regs *regs)
+{
+ unsigned long badvadr = pt_badva(regs);
+
+ do_page_fault(badvadr, FLT_IFETCH, regs);
+}
diff --git a/arch/hexagon/mm/vm_tlb.c b/arch/hexagon/mm/vm_tlb.c
new file mode 100644
index 0000000..c6ff415
--- /dev/null
+++ b/arch/hexagon/mm/vm_tlb.c
@@ -0,0 +1,93 @@
+/*
+ * Hexagon Virtual Machine TLB functions
+ *
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/*
+ * The Hexagon Virtual Machine conceals the real workings of
+ * the TLB, but there are one or two functions that need to
+ * be instantiated for it, differently from a native build.
+ */
+#include <linux/mm.h>
+#include <asm/page.h>
+#include <asm/hexagon_vm.h>
+
+/*
+ * Initial VM implementation has only one map active at a time, with
+ * TLB purgings on changes. So either we're nuking the current map,
+ * or it's a no-op. This operation is messy on true SMPs where other
+ * processors must be induced to flush the copies in their local TLBs,
+ * but Hexagon thread-based virtual processors share the same MMU.
+ */
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+
+ if (mm->context.ptbase == current->active_mm->context.ptbase)
+ __vmclrmap((void *)start, end - start);
+}
+
+/*
+ * Flush a page from the kernel virtual map - used by highmem
+ */
+void flush_tlb_one(unsigned long vaddr)
+{
+ __vmclrmap((void *)vaddr, PAGE_SIZE);
+}
+
+/*
+ * Flush all TLBs across all CPUs, virtual or real.
+ * A single Hexagon core has 6 thread contexts but
+ * only one TLB.
+ */
+void tlb_flush_all(void)
+{
+ /* should probably use that fixaddr end or whateve label */
+ __vmclrmap(0, 0xffff0000);
+}
+
+/*
+ * Flush TLB entries associated with a given mm_struct mapping.
+ */
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ /* Current Virtual Machine has only one map active at a time */
+ if (current->active_mm->context.ptbase == mm->context.ptbase)
+ tlb_flush_all();
+}
+
+/*
+ * Flush TLB state associated with a page of a vma.
+ */
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vaddr)
+{
+ struct mm_struct *mm = vma->vm_mm;
+
+ if (mm->context.ptbase == current->active_mm->context.ptbase)
+ __vmclrmap((void *)vaddr, PAGE_SIZE);
+}
+
+/*
+ * Flush TLB entries associated with a kernel address range.
+ * Like flush range, but without the check on the vma->vm_mm.
+ */
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ __vmclrmap((void *)start, end - start);
+}
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3ff7785..27489b6 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -92,7 +92,7 @@
def_bool y
config GENERIC_GPIO
- def_bool y
+ bool
config DMI
bool
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 43ab1cd..954d81e 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -87,6 +87,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_IGB=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index b11fa88..91c41ec 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -75,6 +75,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 137a453..a5a9e02 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -77,6 +77,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
index 2bf76e4..37b9b42 100644
--- a/arch/ia64/configs/xen_domu_defconfig
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -80,6 +80,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 1d42827..fc7aba0 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -57,6 +57,7 @@
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 8213efe..43f4c92 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -33,6 +33,7 @@
#include <linux/uaccess.h>
#include <linux/iommu.h>
#include <linux/intel-iommu.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/gcc_intrin.h>
@@ -204,7 +205,7 @@
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
case KVM_CAP_IOMMU:
- r = iommu_found();
+ r = iommu_present(&pci_bus_type);
break;
default:
r = 0;
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 30862c0..2de41d4 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -615,11 +615,15 @@
}
}
- if (cpu == SN_HWPERF_ARG_ANY_CPU || cpu == get_cpu()) {
- /* don't care, or already on correct cpu */
+ if (cpu == SN_HWPERF_ARG_ANY_CPU) {
+ /* don't care which cpu */
sn_hwperf_call_sal(op_info);
- }
- else {
+ } else if (cpu == get_cpu()) {
+ /* already on correct cpu */
+ sn_hwperf_call_sal(op_info);
+ put_cpu();
+ } else {
+ put_cpu();
if (use_ipi) {
/* use an interprocessor interrupt to call SAL */
smp_call_function_single(cpu, sn_hwperf_call_sal,
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index a569514..3a3e5b8 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -28,12 +28,12 @@
#include <linux/dma-attrs.h>
#include <asm/io.h>
#include <asm-generic/dma-coherent.h>
+#include <asm/cacheflush.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
#define __dma_alloc_coherent(dev, gfp, size, handle) NULL
#define __dma_free_coherent(size, addr) ((void)0)
-#define __dma_sync(addr, size, rw) ((void)0)
static inline unsigned long device_to_mask(struct device *dev)
{
@@ -95,6 +95,22 @@
#include <asm-generic/dma-mapping-common.h>
+static inline void __dma_sync(unsigned long paddr,
+ size_t size, enum dma_data_direction direction)
+{
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ case DMA_BIDIRECTIONAL:
+ flush_dcache_range(paddr, paddr + size);
+ break;
+ case DMA_FROM_DEVICE:
+ invalidate_dcache_range(paddr, paddr + size);
+ break;
+ default:
+ BUG();
+ }
+}
+
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
struct dma_map_ops *ops = get_dma_ops(dev);
@@ -135,7 +151,7 @@
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
- __dma_sync(vaddr, size, (int)direction);
+ __dma_sync(virt_to_phys(vaddr), size, (int)direction);
}
#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
index 098dfdd..834849f 100644
--- a/arch/microblaze/include/asm/elf.h
+++ b/arch/microblaze/include/asm/elf.h
@@ -16,13 +16,15 @@
* I've snaffled the value from the microblaze binutils source code
* /binutils/microblaze/include/elf/microblaze.h
*/
-#define EM_XILINX_MICROBLAZE 0xbaab
-#define ELF_ARCH EM_XILINX_MICROBLAZE
+#define EM_MICROBLAZE 189
+#define EM_MICROBLAZE_OLD 0xbaab
+#define ELF_ARCH EM_MICROBLAZE
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
-#define elf_check_arch(x) ((x)->e_machine == EM_XILINX_MICROBLAZE)
+#define elf_check_arch(x) ((x)->e_machine == EM_MICROBLAZE \
+ || (x)->e_machine == EM_MICROBLAZE_OLD)
/*
* These are used to set parameters in the core dumps.
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index e6a2284..5a433cb 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -17,8 +17,6 @@
#include <asm-generic/cmpxchg.h>
#include <asm-generic/cmpxchg-local.h>
-#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
-
struct task_struct;
struct thread_info;
@@ -96,11 +94,4 @@
#define arch_align_stack(x) (x)
-/*
- * MicroBlaze doesn't handle unaligned accesses in hardware.
- *
- * Based on this we force the IP header alignment in network drivers.
- */
-#define NET_IP_ALIGN 2
-
#endif /* _ASM_MICROBLAZE_SYSTEM_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 5bb95a1..072b007 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -95,7 +95,7 @@
* - "addr", "addr + size" and "size" are all below the limit
*/
#define access_ok(type, addr, size) \
- (get_fs().seg > (((unsigned long)(addr)) | \
+ (get_fs().seg >= (((unsigned long)(addr)) | \
(size) | ((unsigned long)(addr) + (size))))
/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 44394d8..54194b2 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -34,6 +34,7 @@
{"8.00.a", 0x12},
{"8.00.b", 0x13},
{"8.10.a", 0x14},
+ {"8.20.a", 0x15},
{NULL, 0},
};
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index 393e6b2..dc6416d 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -11,7 +11,6 @@
#include <linux/gfp.h>
#include <linux/dma-debug.h>
#include <asm/bug.h>
-#include <asm/cacheflush.h>
/*
* Generic direct DMA implementation
@@ -21,21 +20,6 @@
* can set archdata.dma_data to an unsigned long holding the offset. By
* default the offset is PCI_DRAM_OFFSET.
*/
-static inline void __dma_sync_page(unsigned long paddr, unsigned long offset,
- size_t size, enum dma_data_direction direction)
-{
- switch (direction) {
- case DMA_TO_DEVICE:
- case DMA_BIDIRECTIONAL:
- flush_dcache_range(paddr + offset, paddr + offset + size);
- break;
- case DMA_FROM_DEVICE:
- invalidate_dcache_range(paddr + offset, paddr + offset + size);
- break;
- default:
- BUG();
- }
-}
static unsigned long get_dma_direct_offset(struct device *dev)
{
@@ -91,7 +75,7 @@
/* FIXME this part of code is untested */
for_each_sg(sgl, sg, nents, i) {
sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
- __dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
+ __dma_sync(page_to_phys(sg_page(sg)) + sg->offset,
sg->length, direction);
}
@@ -116,7 +100,7 @@
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- __dma_sync_page(page_to_phys(page), offset, size, direction);
+ __dma_sync(page_to_phys(page) + offset, size, direction);
return page_to_phys(page) + offset + get_dma_direct_offset(dev);
}
@@ -131,7 +115,63 @@
* phys_to_virt is here because in __dma_sync_page is __virt_to_phys and
* dma_address is physical address
*/
- __dma_sync_page(dma_address, 0 , size, direction);
+ __dma_sync(dma_address, size, direction);
+}
+
+static inline void
+dma_direct_sync_single_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ /*
+ * It's pointless to flush the cache as the memory segment
+ * is given to the CPU
+ */
+
+ if (direction == DMA_FROM_DEVICE)
+ __dma_sync(dma_handle, size, direction);
+}
+
+static inline void
+dma_direct_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ /*
+ * It's pointless to invalidate the cache if the device isn't
+ * supposed to write to the relevant region
+ */
+
+ if (direction == DMA_TO_DEVICE)
+ __dma_sync(dma_handle, size, direction);
+}
+
+static inline void
+dma_direct_sync_sg_for_cpu(struct device *dev,
+ struct scatterlist *sgl, int nents,
+ enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ /* FIXME this part of code is untested */
+ if (direction == DMA_FROM_DEVICE)
+ for_each_sg(sgl, sg, nents, i)
+ __dma_sync(sg->dma_address, sg->length, direction);
+}
+
+static inline void
+dma_direct_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sgl, int nents,
+ enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ /* FIXME this part of code is untested */
+ if (direction == DMA_TO_DEVICE)
+ for_each_sg(sgl, sg, nents, i)
+ __dma_sync(sg->dma_address, sg->length, direction);
}
struct dma_map_ops dma_direct_ops = {
@@ -142,6 +182,10 @@
.dma_supported = dma_direct_dma_supported,
.map_page = dma_direct_map_page,
.unmap_page = dma_direct_unmap_page,
+ .sync_single_for_cpu = dma_direct_sync_single_for_cpu,
+ .sync_single_for_device = dma_direct_sync_single_for_device,
+ .sync_sg_for_cpu = dma_direct_sync_sg_for_cpu,
+ .sync_sg_for_device = dma_direct_sync_sg_for_device,
};
EXPORT_SYMBOL(dma_direct_ops);
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index 66fad23..6348dc8 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -119,7 +119,7 @@
case MICROBLAZE_DIV_ZERO_EXCEPTION:
if (user_mode(regs)) {
pr_debug("Divide by zero exception in user mode\n");
- _exception(SIGILL, regs, FPE_INTDIV, addr);
+ _exception(SIGFPE, regs, FPE_INTDIV, addr);
return;
}
printk(KERN_WARNING "Divide by zero exception " \
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index dbb8124..95cc295 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -179,6 +179,7 @@
ti->cpu_context.msr = (childregs->msr|MSR_VM);
ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
+ ti->cpu_context.msr &= ~MSR_IE;
#endif
ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index 6a8e0cc..043cb58 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -148,7 +148,7 @@
ret = -1L;
if (unlikely(current->audit_context))
- audit_syscall_entry(EM_XILINX_MICROBLAZE, regs->r12,
+ audit_syscall_entry(EM_MICROBLAZE, regs->r12,
regs->r5, regs->r6,
regs->r7, regs->r8);
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index e5550ce..af74b11 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -308,7 +308,8 @@
{
if (timer_initialized) {
struct clocksource *cs = &clocksource_microblaze;
- cycle_t cyc = cnt32_to_63(cs->read(NULL));
+
+ cycle_t cyc = cnt32_to_63(cs->read(NULL)) & LLONG_MAX;
return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
}
return 0;
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 10c320a..c13067b 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -25,5 +25,6 @@
lib-y += modsi3.o
lib-y += muldi3.o
lib-y += mulsi3.o
+lib-y += ucmpdi2.o
lib-y += udivsi3.o
lib-y += umodsi3.o
diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S
index 5810cec..f037266 100644
--- a/arch/microblaze/lib/uaccess_old.S
+++ b/arch/microblaze/lib/uaccess_old.S
@@ -10,6 +10,7 @@
#include <linux/errno.h>
#include <linux/linkage.h>
+#include <asm/page.h>
/*
* int __strncpy_user(char *to, char *from, int len);
@@ -33,8 +34,8 @@
* r3 - temp count
* r4 - temp val
*/
+ beqid r7,3f
addik r3,r7,0 /* temp_count = len */
- beqi r3,3f
1:
lbu r4,r6,r0
sb r4,r5,r0
@@ -76,8 +77,8 @@
.type __strnlen_user, @function
.align 4;
__strnlen_user:
+ beqid r6,3f
addik r3,r6,0
- beqi r3,3f
1:
lbu r4,r5,r0
beqid r4,2f /* break on NUL */
@@ -102,6 +103,49 @@
.section __ex_table,"a"
.word 1b,4b
+/* Loop unrolling for __copy_tofrom_user */
+#define COPY(offset) \
+1: lwi r4 , r6, 0x0000 + offset; \
+2: lwi r19, r6, 0x0004 + offset; \
+3: lwi r20, r6, 0x0008 + offset; \
+4: lwi r21, r6, 0x000C + offset; \
+5: lwi r22, r6, 0x0010 + offset; \
+6: lwi r23, r6, 0x0014 + offset; \
+7: lwi r24, r6, 0x0018 + offset; \
+8: lwi r25, r6, 0x001C + offset; \
+9: swi r4 , r5, 0x0000 + offset; \
+10: swi r19, r5, 0x0004 + offset; \
+11: swi r20, r5, 0x0008 + offset; \
+12: swi r21, r5, 0x000C + offset; \
+13: swi r22, r5, 0x0010 + offset; \
+14: swi r23, r5, 0x0014 + offset; \
+15: swi r24, r5, 0x0018 + offset; \
+16: swi r25, r5, 0x001C + offset; \
+ .section __ex_table,"a"; \
+ .word 1b, 0f; \
+ .word 2b, 0f; \
+ .word 3b, 0f; \
+ .word 4b, 0f; \
+ .word 5b, 0f; \
+ .word 6b, 0f; \
+ .word 7b, 0f; \
+ .word 8b, 0f; \
+ .word 9b, 0f; \
+ .word 10b, 0f; \
+ .word 11b, 0f; \
+ .word 12b, 0f; \
+ .word 13b, 0f; \
+ .word 14b, 0f; \
+ .word 15b, 0f; \
+ .word 16b, 0f; \
+ .text
+
+#define COPY_80(offset) \
+ COPY(0x00 + offset);\
+ COPY(0x20 + offset);\
+ COPY(0x40 + offset);\
+ COPY(0x60 + offset);
+
/*
* int __copy_tofrom_user(char *to, char *from, int len)
* Return:
@@ -119,34 +163,79 @@
* r7, r3 - count
* r4 - tempval
*/
- beqid r7, 3f /* zero size is not likely */
- andi r3, r7, 0x3 /* filter add count */
- bneid r3, 4f /* if is odd value then byte copying */
+ beqid r7, 0f /* zero size is not likely */
or r3, r5, r6 /* find if is any to/from unaligned */
- andi r3, r3, 0x3 /* mask unaligned */
- bneid r3, 1f /* it is unaligned -> then jump */
+ or r3, r3, r7 /* find if count is unaligned */
+ andi r3, r3, 0x3 /* mask last 3 bits */
+ bneid r3, bu1 /* if r3 is not zero then byte copying */
or r3, r0, r0
-/* at least one 4 byte copy */
-5: lw r4, r6, r3
-6: sw r4, r5, r3
+ rsubi r3, r7, PAGE_SIZE /* detect PAGE_SIZE */
+ beqid r3, page;
+ or r3, r0, r0
+
+w1: lw r4, r6, r3 /* at least one 4 byte copy */
+w2: sw r4, r5, r3
addik r7, r7, -4
- bneid r7, 5b
+ bneid r7, w1
addik r3, r3, 4
addik r3, r7, 0
rtsd r15, 8
nop
-4: or r3, r0, r0
-1: lbu r4,r6,r3
-2: sb r4,r5,r3
+
+ .section __ex_table,"a"
+ .word w1, 0f;
+ .word w2, 0f;
+ .text
+
+.align 4 /* Alignment is important to keep icache happy */
+page: /* Create room on stack and save registers for storign values */
+ addik r1, r1, -32
+ swi r19, r1, 4
+ swi r20, r1, 8
+ swi r21, r1, 12
+ swi r22, r1, 16
+ swi r23, r1, 20
+ swi r24, r1, 24
+ swi r25, r1, 28
+loop: /* r4, r19, r20, r21, r22, r23, r24, r25 are used for storing values */
+ /* Loop unrolling to get performance boost */
+ COPY_80(0x000);
+ COPY_80(0x080);
+ COPY_80(0x100);
+ COPY_80(0x180);
+ /* copy loop */
+ addik r6, r6, 0x200
+ addik r7, r7, -0x200
+ bneid r7, loop
+ addik r5, r5, 0x200
+ /* Restore register content */
+ lwi r19, r1, 4
+ lwi r20, r1, 8
+ lwi r21, r1, 12
+ lwi r22, r1, 16
+ lwi r23, r1, 20
+ lwi r24, r1, 24
+ lwi r25, r1, 28
+ addik r1, r1, 32
+ /* return back */
+ addik r3, r7, 0
+ rtsd r15, 8
+ nop
+
+.align 4 /* Alignment is important to keep icache happy */
+bu1: lbu r4,r6,r3
+bu2: sb r4,r5,r3
addik r7,r7,-1
- bneid r7,1b
+ bneid r7,bu1
addik r3,r3,1 /* delay slot */
-3:
+0:
addik r3,r7,0
rtsd r15,8
nop
.size __copy_tofrom_user, . - __copy_tofrom_user
.section __ex_table,"a"
- .word 1b,3b,2b,3b,5b,3b,6b,3b
+ .word bu1, 0b;
+ .word bu2, 0b;
+ .text
diff --git a/arch/microblaze/lib/ucmpdi2.c b/arch/microblaze/lib/ucmpdi2.c
new file mode 100644
index 0000000..63ca105
--- /dev/null
+++ b/arch/microblaze/lib/ucmpdi2.c
@@ -0,0 +1,20 @@
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+word_type __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+ const DWunion au = {.ll = a};
+ const DWunion bu = {.ll = b};
+
+ if ((unsigned int) au.s.high < (unsigned int) bu.s.high)
+ return 0;
+ else if ((unsigned int) au.s.high > (unsigned int) bu.s.high)
+ return 2;
+ if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+ return 0;
+ else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+ return 2;
+ return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c
index fbb5593..dda090b 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -422,6 +422,7 @@
},
};
+/* AC97 or I2S device */
static struct platform_device db1200_audio_dev = {
/* name assigned later based on switch setting */
.id = 1, /* PSC ID */
@@ -429,19 +430,32 @@
.resource = au1200_psc1_res,
};
+/* DB1200 ASoC card device */
+static struct platform_device db1200_sound_dev = {
+ /* name assigned later based on switch setting */
+ .id = 1, /* PSC ID */
+};
+
static struct platform_device db1200_stac_dev = {
.name = "ac97-codec",
.id = 1, /* on PSC1 */
};
+static struct platform_device db1200_audiodma_dev = {
+ .name = "au1xpsc-pcm",
+ .id = 1, /* PSC ID */
+};
+
static struct platform_device *db1200_devs[] __initdata = {
NULL, /* PSC0, selected by S6.8 */
&db1200_ide_dev,
&db1200_eth_dev,
&db1200_rtc_dev,
&db1200_nand_dev,
+ &db1200_audiodma_dev,
&db1200_audio_dev,
&db1200_stac_dev,
+ &db1200_sound_dev,
};
static int __init db1200_dev_init(void)
@@ -501,10 +515,12 @@
if (sw == BCSR_SWITCHES_DIP_8) {
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
db1200_audio_dev.name = "au1xpsc_i2s";
+ db1200_sound_dev.name = "db1200-i2s";
printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
} else {
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
db1200_audio_dev.name = "au1xpsc_ac97";
+ db1200_sound_dev.name = "db1200-ac97";
printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
}
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
index 978d5ab..7057d28f 100644
--- a/arch/mips/alchemy/devboards/db1x00/platform.c
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -19,8 +19,11 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
@@ -85,6 +88,45 @@
#endif
#endif
+static struct resource alchemy_ac97c_res[] = {
+ [0] = {
+ .start = AU1000_AC97_PHYS_ADDR,
+ .end = AU1000_AC97_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMA_ID_AC97C_TX,
+ .end = DMA_ID_AC97C_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMA_ID_AC97C_RX,
+ .end = DMA_ID_AC97C_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device alchemy_ac97c_dev = {
+ .name = "alchemy-ac97c",
+ .id = -1,
+ .resource = alchemy_ac97c_res,
+ .num_resources = ARRAY_SIZE(alchemy_ac97c_res),
+};
+
+static struct platform_device alchemy_ac97c_dma_dev = {
+ .name = "alchemy-pcm-dma",
+ .id = 0,
+};
+
+static struct platform_device db1x00_codec_dev = {
+ .name = "ac97-codec",
+ .id = -1,
+};
+
+static struct platform_device db1x00_audio_dev = {
+ .name = "db1000-audio",
+};
+
static int __init db1xxx_dev_init(void)
{
#ifdef DB1XXX_HAS_PCMCIA
@@ -113,6 +155,12 @@
1);
#endif
db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
+
+ platform_device_register(&db1x00_codec_dev);
+ platform_device_register(&alchemy_ac97c_dma_dev);
+ platform_device_register(&alchemy_ac97c_dev);
+ platform_device_register(&db1x00_audio_dev);
+
return 0;
}
device_initcall(db1xxx_dev_init);
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index dbc5106..b77df03 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -111,7 +111,8 @@
int f_bavail;
compat_fsid_t f_fsid;
int f_namelen;
- int f_spare[6];
+ int f_flags;
+ int f_spare[5];
};
#define COMPAT_RLIM_INFINITY 0x7fffffffUL
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
index 892b7f1..5a5cb73 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -394,19 +394,6 @@
#define PSC_SPITXRX_LC (1 << 29)
#define PSC_SPITXRX_SR (1 << 28)
-/* PSC in SMBus (I2C) Mode. */
-typedef struct psc_smb {
- u32 psc_sel;
- u32 psc_ctrl;
- u32 psc_smbcfg;
- u32 psc_smbmsk;
- u32 psc_smbpcr;
- u32 psc_smbstat;
- u32 psc_smbevnt;
- u32 psc_smbtxrx;
- u32 psc_smbtmr;
-} psc_smb_t;
-
/* SMBus Config Register. */
#define PSC_SMBCFG_RT_MASK (3 << 30)
#define PSC_SMBCFG_RT_FIFO1 (0 << 30)
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 538266b..522eb8a 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -798,7 +798,7 @@
if ((u32) mem & 1 && count >= 1) {
if (gdbstub_read_byte(mem, ch) != 0)
return 0;
- buf = pack_hex_byte(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[0]);
mem++;
count--;
}
@@ -806,8 +806,8 @@
if ((u32) mem & 3 && count >= 2) {
if (gdbstub_read_word(mem, ch) != 0)
return 0;
- buf = pack_hex_byte(buf, ch[0]);
- buf = pack_hex_byte(buf, ch[1]);
+ buf = hex_byte_pack(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[1]);
mem += 2;
count -= 2;
}
@@ -815,10 +815,10 @@
while (count >= 4) {
if (gdbstub_read_dword(mem, ch) != 0)
return 0;
- buf = pack_hex_byte(buf, ch[0]);
- buf = pack_hex_byte(buf, ch[1]);
- buf = pack_hex_byte(buf, ch[2]);
- buf = pack_hex_byte(buf, ch[3]);
+ buf = hex_byte_pack(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[1]);
+ buf = hex_byte_pack(buf, ch[2]);
+ buf = hex_byte_pack(buf, ch[3]);
mem += 4;
count -= 4;
}
@@ -826,8 +826,8 @@
if (count >= 2) {
if (gdbstub_read_word(mem, ch) != 0)
return 0;
- buf = pack_hex_byte(buf, ch[0]);
- buf = pack_hex_byte(buf, ch[1]);
+ buf = hex_byte_pack(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[1]);
mem += 2;
count -= 2;
}
@@ -835,7 +835,7 @@
if (count >= 1) {
if (gdbstub_read_byte(mem, ch) != 0)
return 0;
- buf = pack_hex_byte(buf, ch[0]);
+ buf = hex_byte_pack(buf, ch[0]);
}
*buf = 0;
@@ -1273,13 +1273,13 @@
ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
hx = hex_asc_hi(excep >> 8);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(excep >> 8);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_hi(excep);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(excep);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
*ptr = 0;
@@ -1291,21 +1291,21 @@
ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
hx = hex_asc_hi(bcberr >> 24);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(bcberr >> 24);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_hi(bcberr >> 16);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(bcberr >> 16);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_hi(bcberr >> 8);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(bcberr >> 8);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_hi(bcberr);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
hx = hex_asc_lo(bcberr);
- ptr = pack_hex_byte(ptr, hx);
+ ptr = hex_byte_pack(ptr, hx);
ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
*ptr = 0;
@@ -1321,12 +1321,12 @@
* Send trap type (converted to signal)
*/
*ptr++ = 'T';
- ptr = pack_hex_byte(ptr, sigval);
+ ptr = hex_byte_pack(ptr, sigval);
/*
* Send Error PC
*/
- ptr = pack_hex_byte(ptr, GDB_REGID_PC);
+ ptr = hex_byte_pack(ptr, GDB_REGID_PC);
*ptr++ = ':';
ptr = mem2hex(®s->pc, ptr, 4, 0);
*ptr++ = ';';
@@ -1334,7 +1334,7 @@
/*
* Send frame pointer
*/
- ptr = pack_hex_byte(ptr, GDB_REGID_FP);
+ ptr = hex_byte_pack(ptr, GDB_REGID_FP);
*ptr++ = ':';
ptr = mem2hex(®s->a3, ptr, 4, 0);
*ptr++ = ';';
@@ -1343,7 +1343,7 @@
* Send stack pointer
*/
ssp = (unsigned long) (regs + 1);
- ptr = pack_hex_byte(ptr, GDB_REGID_SP);
+ ptr = hex_byte_pack(ptr, GDB_REGID_SP);
*ptr++ = ':';
ptr = mem2hex(&ssp, ptr, 4, 0);
*ptr++ = ';';
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index efa0b60c..760f331 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -105,7 +105,8 @@
__kernel_fsid_t f_fsid;
s32 f_namelen;
s32 f_frsize;
- s32 f_spare[5];
+ s32 f_flags;
+ s32 f_spare[4];
};
struct compat_sigcontext {
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 91010e8..88e602f 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -100,7 +100,8 @@
compat_fsid_t f_fsid;
int f_namelen; /* SunOS ignores this field. */
int f_frsize;
- int f_spare[5];
+ int f_flags;
+ int f_spare[4];
};
#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index a4f6c85..08fe69e 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -149,6 +149,12 @@
#define KVM_SREGS_E_UPDATE_DBSR (1 << 3)
/*
+ * Book3S special bits to indicate contents in the struct by maintaining
+ * backwards compatibility with older structs. If adding a new field,
+ * please make sure to add a flag for that new field */
+#define KVM_SREGS_S_HIOR (1 << 0)
+
+/*
* In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
* previous KVM_GET_REGS.
*
@@ -173,6 +179,8 @@
__u64 ibat[8];
__u64 dbat[8];
} ppc32;
+ __u64 flags; /* KVM_SREGS_S_ */
+ __u64 hior;
} s;
struct {
union {
@@ -276,6 +284,11 @@
#define KVM_INTERRUPT_UNSET -2U
#define KVM_INTERRUPT_SET_LEVEL -3U
+#define KVM_CPU_440 1
+#define KVM_CPU_E500V2 2
+#define KVM_CPU_3S_32 3
+#define KVM_CPU_3S_64 4
+
/* for KVM_CAP_SPAPR_TCE */
struct kvm_create_spapr_tce {
__u64 liobn;
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 98da010..a384ffd 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -90,6 +90,8 @@
#endif
int context_id[SID_CONTEXTS];
+ bool hior_sregs; /* HIOR is set by SREGS, not PVR */
+
struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG];
struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];
@@ -139,15 +141,14 @@
extern int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu);
extern pfn_t kvmppc_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn);
-extern void kvmppc_handler_lowmem_trampoline(void);
-extern void kvmppc_handler_trampoline_enter(void);
-extern void kvmppc_rmcall(ulong srr0, ulong srr1);
+extern void kvmppc_entry_trampoline(void);
extern void kvmppc_hv_entry_trampoline(void);
extern void kvmppc_load_up_fpu(void);
extern void kvmppc_load_up_altivec(void);
extern void kvmppc_load_up_vsx(void);
extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst);
extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst);
+extern int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd);
static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
{
@@ -382,6 +383,39 @@
}
#endif
+static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
+ unsigned long pte_index)
+{
+ unsigned long rb, va_low;
+
+ rb = (v & ~0x7fUL) << 16; /* AVA field */
+ va_low = pte_index >> 3;
+ if (v & HPTE_V_SECONDARY)
+ va_low = ~va_low;
+ /* xor vsid from AVA */
+ if (!(v & HPTE_V_1TB_SEG))
+ va_low ^= v >> 12;
+ else
+ va_low ^= v >> 24;
+ va_low &= 0x7ff;
+ if (v & HPTE_V_LARGE) {
+ rb |= 1; /* L field */
+ if (cpu_has_feature(CPU_FTR_ARCH_206) &&
+ (r & 0xff000)) {
+ /* non-16MB large page, must be 64k */
+ /* (masks depend on page size) */
+ rb |= 0x1000; /* page encoding in LP field */
+ rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
+ rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
+ }
+ } else {
+ /* 4kB page */
+ rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
+ }
+ rb |= (v >> 54) & 0x300; /* B field */
+ return rb;
+}
+
/* Magic register values loaded into r3 and r4 before the 'sc' assembly
* instruction for the OSI hypercalls */
#define OSI_SC_MAGIC_R3 0x113724FA
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index ef7b368..1f2f5b6 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -75,6 +75,8 @@
ulong scratch0;
ulong scratch1;
u8 in_guest;
+ u8 restore_hid5;
+ u8 napping;
#ifdef CONFIG_KVM_BOOK3S_64_HV
struct kvm_vcpu *kvm_vcpu;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index cc22b28..bf8af5d 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -198,21 +198,29 @@
*/
struct kvmppc_vcore {
int n_runnable;
- int n_blocked;
+ int n_busy;
int num_threads;
int entry_exit_count;
int n_woken;
int nap_count;
+ int napping_threads;
u16 pcpu;
- u8 vcore_running;
+ u8 vcore_state;
u8 in_guest;
struct list_head runnable_threads;
spinlock_t lock;
+ wait_queue_head_t wq;
};
#define VCORE_ENTRY_COUNT(vc) ((vc)->entry_exit_count & 0xff)
#define VCORE_EXIT_COUNT(vc) ((vc)->entry_exit_count >> 8)
+/* Values for vcore_state */
+#define VCORE_INACTIVE 0
+#define VCORE_RUNNING 1
+#define VCORE_EXITING 2
+#define VCORE_SLEEPING 3
+
struct kvmppc_pte {
ulong eaddr;
u64 vpage;
@@ -258,14 +266,6 @@
ulong host_stack;
u32 host_pid;
#ifdef CONFIG_PPC_BOOK3S
- ulong host_msr;
- ulong host_r2;
- void *host_retip;
- ulong trampoline_lowmem;
- ulong trampoline_enter;
- ulong highmem_handler;
- ulong rmcall;
- ulong host_paca_phys;
struct kvmppc_slb slb[64];
int slb_max; /* 1 + index of last valid entry in slb[] */
int slb_nr; /* total number of entries in SLB */
@@ -389,6 +389,9 @@
u8 dcr_is_write;
u8 osi_needed;
u8 osi_enabled;
+ u8 papr_enabled;
+ u8 sane;
+ u8 cpu_type;
u8 hcall_needed;
u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
@@ -408,11 +411,13 @@
struct dtl *dtl;
struct dtl *dtl_end;
+ wait_queue_head_t *wqp;
struct kvmppc_vcore *vcore;
int ret;
int trap;
int state;
int ptid;
+ bool timer_running;
wait_queue_head_t cpu_run;
struct kvm_vcpu_arch_shared *shared;
@@ -428,8 +433,9 @@
#endif
};
-#define KVMPPC_VCPU_BUSY_IN_HOST 0
-#define KVMPPC_VCPU_BLOCKED 1
+/* Values for vcpu->arch.state */
+#define KVMPPC_VCPU_STOPPED 0
+#define KVMPPC_VCPU_BUSY_IN_HOST 1
#define KVMPPC_VCPU_RUNNABLE 2
#endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index d121f49..46efd1a2 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -66,6 +66,7 @@
extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
extern void kvmppc_emulate_dec(struct kvm_vcpu *vcpu);
extern u32 kvmppc_get_dec(struct kvm_vcpu *vcpu, u64 tb);
+extern int kvmppc_sanity_check(struct kvm_vcpu *vcpu);
/* Core-specific hooks */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index fa0d27a..559ae1ee 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -354,3 +354,5 @@
SYSCALL_SPU(syncfs)
COMPAT_SYS_SPU(sendmmsg)
SYSCALL_SPU(setns)
+COMPAT_SYS(process_vm_readv)
+COMPAT_SYS(process_vm_writev)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index b8b3f59..d3d1b5e 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -373,10 +373,12 @@
#define __NR_syncfs 348
#define __NR_sendmmsg 349
#define __NR_setns 350
+#define __NR_process_vm_readv 351
+#define __NR_process_vm_writev 352
#ifdef __KERNEL__
-#define __NR_syscalls 351
+#define __NR_syscalls 353
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 5f078bc..69f7ffe 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -44,6 +44,7 @@
#include <asm/compat.h>
#include <asm/mmu.h>
#include <asm/hvcall.h>
+#include <asm/xics.h>
#endif
#ifdef CONFIG_PPC_ISERIES
#include <asm/iseries/alpaca.h>
@@ -449,8 +450,6 @@
#ifdef CONFIG_PPC_BOOK3S
DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm));
DEFINE(VCPU_VCPUID, offsetof(struct kvm_vcpu, vcpu_id));
- DEFINE(VCPU_HOST_RETIP, offsetof(struct kvm_vcpu, arch.host_retip));
- DEFINE(VCPU_HOST_MSR, offsetof(struct kvm_vcpu, arch.host_msr));
DEFINE(VCPU_PURR, offsetof(struct kvm_vcpu, arch.purr));
DEFINE(VCPU_SPURR, offsetof(struct kvm_vcpu, arch.spurr));
DEFINE(VCPU_DSCR, offsetof(struct kvm_vcpu, arch.dscr));
@@ -458,14 +457,12 @@
DEFINE(VCPU_UAMOR, offsetof(struct kvm_vcpu, arch.uamor));
DEFINE(VCPU_CTRL, offsetof(struct kvm_vcpu, arch.ctrl));
DEFINE(VCPU_DABR, offsetof(struct kvm_vcpu, arch.dabr));
- DEFINE(VCPU_TRAMPOLINE_LOWMEM, offsetof(struct kvm_vcpu, arch.trampoline_lowmem));
- DEFINE(VCPU_TRAMPOLINE_ENTER, offsetof(struct kvm_vcpu, arch.trampoline_enter));
- DEFINE(VCPU_HIGHMEM_HANDLER, offsetof(struct kvm_vcpu, arch.highmem_handler));
- DEFINE(VCPU_RMCALL, offsetof(struct kvm_vcpu, arch.rmcall));
DEFINE(VCPU_HFLAGS, offsetof(struct kvm_vcpu, arch.hflags));
DEFINE(VCPU_DEC, offsetof(struct kvm_vcpu, arch.dec));
DEFINE(VCPU_DEC_EXPIRES, offsetof(struct kvm_vcpu, arch.dec_expires));
DEFINE(VCPU_PENDING_EXC, offsetof(struct kvm_vcpu, arch.pending_exceptions));
+ DEFINE(VCPU_CEDED, offsetof(struct kvm_vcpu, arch.ceded));
+ DEFINE(VCPU_PRODDED, offsetof(struct kvm_vcpu, arch.prodded));
DEFINE(VCPU_VPA, offsetof(struct kvm_vcpu, arch.vpa));
DEFINE(VCPU_MMCR, offsetof(struct kvm_vcpu, arch.mmcr));
DEFINE(VCPU_PMC, offsetof(struct kvm_vcpu, arch.pmc));
@@ -481,6 +478,7 @@
DEFINE(VCORE_ENTRY_EXIT, offsetof(struct kvmppc_vcore, entry_exit_count));
DEFINE(VCORE_NAP_COUNT, offsetof(struct kvmppc_vcore, nap_count));
DEFINE(VCORE_IN_GUEST, offsetof(struct kvmppc_vcore, in_guest));
+ DEFINE(VCORE_NAPPING_THREADS, offsetof(struct kvmppc_vcore, napping_threads));
DEFINE(VCPU_SVCPU, offsetof(struct kvmppc_vcpu_book3s, shadow_vcpu) -
offsetof(struct kvmppc_vcpu_book3s, vcpu));
DEFINE(VCPU_SLB_E, offsetof(struct kvmppc_slb, orige));
@@ -537,6 +535,8 @@
HSTATE_FIELD(HSTATE_SCRATCH0, scratch0);
HSTATE_FIELD(HSTATE_SCRATCH1, scratch1);
HSTATE_FIELD(HSTATE_IN_GUEST, in_guest);
+ HSTATE_FIELD(HSTATE_RESTORE_HID5, restore_hid5);
+ HSTATE_FIELD(HSTATE_NAPPING, napping);
#ifdef CONFIG_KVM_BOOK3S_64_HV
HSTATE_FIELD(HSTATE_KVM_VCPU, kvm_vcpu);
@@ -549,6 +549,7 @@
HSTATE_FIELD(HSTATE_DSCR, host_dscr);
HSTATE_FIELD(HSTATE_DABR, dabr);
HSTATE_FIELD(HSTATE_DECEXP, dec_expires);
+ DEFINE(IPI_PRIORITY, IPI_PRIORITY);
#endif /* CONFIG_KVM_BOOK3S_64_HV */
#else /* CONFIG_PPC_BOOK3S */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 41b02c7..29ddd8b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -427,16 +427,6 @@
b . /* prevent spec. execution */
#endif /* __DISABLED__ */
-/* KVM's trampoline code needs to be close to the interrupt handlers */
-
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-#ifdef CONFIG_KVM_BOOK3S_PR
-#include "../kvm/book3s_rmhandlers.S"
-#else
-#include "../kvm/book3s_hv_rmhandlers.S"
-#endif
-#endif
-
.align 7
.globl __end_interrupts
__end_interrupts:
diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index da3a122..ca1f88b 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -78,6 +78,8 @@
for (i = 0; i < ARRAY_SIZE(vcpu_44x->shadow_refs); i++)
vcpu_44x->shadow_refs[i].gtlb_index = -1;
+ vcpu->arch.cpu_type = KVM_CPU_440;
+
return 0;
}
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 08428e2..3688aee 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -43,18 +43,22 @@
fpu.o \
book3s_paired_singles.o \
book3s_pr.o \
+ book3s_pr_papr.o \
book3s_emulate.o \
book3s_interrupts.o \
book3s_mmu_hpte.o \
book3s_64_mmu_host.o \
book3s_64_mmu.o \
book3s_32_mmu.o
+kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_PR) := \
+ book3s_rmhandlers.o
kvm-book3s_64-objs-$(CONFIG_KVM_BOOK3S_64_HV) := \
book3s_hv.o \
book3s_hv_interrupts.o \
book3s_64_mmu_hv.o
kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HV) := \
+ book3s_hv_rmhandlers.o \
book3s_hv_rm_mmu.o \
book3s_64_vio_hv.o \
book3s_hv_builtin.o
diff --git a/arch/powerpc/kvm/book3s_32_sr.S b/arch/powerpc/kvm/book3s_32_sr.S
index 3608471..7e06a6f 100644
--- a/arch/powerpc/kvm/book3s_32_sr.S
+++ b/arch/powerpc/kvm/book3s_32_sr.S
@@ -31,7 +31,7 @@
* R1 = host R1
* R2 = host R2
* R3 = shadow vcpu
- * all other volatile GPRS = free
+ * all other volatile GPRS = free except R4, R6
* SVCPU[CR] = guest CR
* SVCPU[XER] = guest XER
* SVCPU[CTR] = guest CTR
diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c
index c6d3e19..b871721 100644
--- a/arch/powerpc/kvm/book3s_64_mmu.c
+++ b/arch/powerpc/kvm/book3s_64_mmu.c
@@ -128,7 +128,13 @@
dprintk("MMU: page=0x%x sdr1=0x%llx pteg=0x%llx vsid=0x%llx\n",
page, vcpu_book3s->sdr1, pteg, slbe->vsid);
- r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+ /* When running a PAPR guest, SDR1 contains a HVA address instead
+ of a GPA */
+ if (vcpu_book3s->vcpu.arch.papr_enabled)
+ r = pteg;
+ else
+ r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+
if (kvm_is_error_hva(r))
return r;
return r | (pteg & ~PAGE_MASK);
diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S
index 04e7d3b..f2e6e48 100644
--- a/arch/powerpc/kvm/book3s_64_slb.S
+++ b/arch/powerpc/kvm/book3s_64_slb.S
@@ -53,7 +53,7 @@
* R1 = host R1
* R2 = host R2
* R3 = shadow vcpu
- * all other volatile GPRS = free
+ * all other volatile GPRS = free except R4, R6
* SVCPU[CR] = guest CR
* SVCPU[XER] = guest XER
* SVCPU[CTR] = guest CTR
diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
index 4668465..0c9dc62 100644
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -63,6 +63,25 @@
* function pointers, so let's just disable the define. */
#undef mfsrin
+enum priv_level {
+ PRIV_PROBLEM = 0,
+ PRIV_SUPER = 1,
+ PRIV_HYPER = 2,
+};
+
+static bool spr_allowed(struct kvm_vcpu *vcpu, enum priv_level level)
+{
+ /* PAPR VMs only access supervisor SPRs */
+ if (vcpu->arch.papr_enabled && (level > PRIV_SUPER))
+ return false;
+
+ /* Limit user space to its own small SPR set */
+ if ((vcpu->arch.shared->msr & MSR_PR) && level > PRIV_PROBLEM)
+ return false;
+
+ return true;
+}
+
int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
unsigned int inst, int *advance)
{
@@ -296,6 +315,8 @@
switch (sprn) {
case SPRN_SDR1:
+ if (!spr_allowed(vcpu, PRIV_HYPER))
+ goto unprivileged;
to_book3s(vcpu)->sdr1 = spr_val;
break;
case SPRN_DSISR:
@@ -390,6 +411,7 @@
case SPRN_PMC4_GEKKO:
case SPRN_WPAR_GEKKO:
break;
+unprivileged:
default:
printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
#ifndef DEBUG_SPR
@@ -421,6 +443,8 @@
break;
}
case SPRN_SDR1:
+ if (!spr_allowed(vcpu, PRIV_HYPER))
+ goto unprivileged;
kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->sdr1);
break;
case SPRN_DSISR:
@@ -449,6 +473,10 @@
case SPRN_HID5:
kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[5]);
break;
+ case SPRN_CFAR:
+ case SPRN_PURR:
+ kvmppc_set_gpr(vcpu, rt, 0);
+ break;
case SPRN_GQR0:
case SPRN_GQR1:
case SPRN_GQR2:
@@ -476,6 +504,7 @@
kvmppc_set_gpr(vcpu, rt, 0);
break;
default:
+unprivileged:
printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
#ifndef DEBUG_SPR
emulated = EMULATE_FAIL;
diff --git a/arch/powerpc/kvm/book3s_exports.c b/arch/powerpc/kvm/book3s_exports.c
index 88c8f26..f7f63a0 100644
--- a/arch/powerpc/kvm/book3s_exports.c
+++ b/arch/powerpc/kvm/book3s_exports.c
@@ -23,9 +23,7 @@
#ifdef CONFIG_KVM_BOOK3S_64_HV
EXPORT_SYMBOL_GPL(kvmppc_hv_entry_trampoline);
#else
-EXPORT_SYMBOL_GPL(kvmppc_handler_trampoline_enter);
-EXPORT_SYMBOL_GPL(kvmppc_handler_lowmem_trampoline);
-EXPORT_SYMBOL_GPL(kvmppc_rmcall);
+EXPORT_SYMBOL_GPL(kvmppc_entry_trampoline);
EXPORT_SYMBOL_GPL(kvmppc_load_up_fpu);
#ifdef CONFIG_ALTIVEC
EXPORT_SYMBOL_GPL(kvmppc_load_up_altivec);
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index cc0d7f1..4644c79 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -62,6 +62,8 @@
/* #define EXIT_DEBUG_SIMPLE */
/* #define EXIT_DEBUG_INT */
+static void kvmppc_end_cede(struct kvm_vcpu *vcpu);
+
void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
local_paca->kvm_hstate.kvm_vcpu = vcpu;
@@ -72,40 +74,10 @@
{
}
-static void kvmppc_vcpu_blocked(struct kvm_vcpu *vcpu);
-static void kvmppc_vcpu_unblocked(struct kvm_vcpu *vcpu);
-
-void kvmppc_vcpu_block(struct kvm_vcpu *vcpu)
-{
- u64 now;
- unsigned long dec_nsec;
-
- now = get_tb();
- if (now >= vcpu->arch.dec_expires && !kvmppc_core_pending_dec(vcpu))
- kvmppc_core_queue_dec(vcpu);
- if (vcpu->arch.pending_exceptions)
- return;
- if (vcpu->arch.dec_expires != ~(u64)0) {
- dec_nsec = (vcpu->arch.dec_expires - now) * NSEC_PER_SEC /
- tb_ticks_per_sec;
- hrtimer_start(&vcpu->arch.dec_timer, ktime_set(0, dec_nsec),
- HRTIMER_MODE_REL);
- }
-
- kvmppc_vcpu_blocked(vcpu);
-
- kvm_vcpu_block(vcpu);
- vcpu->stat.halt_wakeup++;
-
- if (vcpu->arch.dec_expires != ~(u64)0)
- hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
-
- kvmppc_vcpu_unblocked(vcpu);
-}
-
void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
{
vcpu->arch.shregs.msr = msr;
+ kvmppc_end_cede(vcpu);
}
void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
@@ -257,15 +229,6 @@
switch (req) {
case H_CEDE:
- vcpu->arch.shregs.msr |= MSR_EE;
- vcpu->arch.ceded = 1;
- smp_mb();
- if (!vcpu->arch.prodded)
- kvmppc_vcpu_block(vcpu);
- else
- vcpu->arch.prodded = 0;
- smp_mb();
- vcpu->arch.ceded = 0;
break;
case H_PROD:
target = kvmppc_get_gpr(vcpu, 4);
@@ -388,20 +351,6 @@
break;
}
-
- if (!(r & RESUME_HOST)) {
- /* To avoid clobbering exit_reason, only check for signals if
- * we aren't already exiting to userspace for some other
- * reason. */
- if (signal_pending(tsk)) {
- vcpu->stat.signal_exits++;
- run->exit_reason = KVM_EXIT_INTR;
- r = -EINTR;
- } else {
- kvmppc_core_deliver_interrupts(vcpu);
- }
- }
-
return r;
}
@@ -479,13 +428,9 @@
kvmppc_mmu_book3s_hv_init(vcpu);
/*
- * Some vcpus may start out in stopped state. If we initialize
- * them to busy-in-host state they will stop other vcpus in the
- * vcore from running. Instead we initialize them to blocked
- * state, effectively considering them to be stopped until we
- * see the first run ioctl for them.
+ * We consider the vcpu stopped until we see the first run ioctl for it.
*/
- vcpu->arch.state = KVMPPC_VCPU_BLOCKED;
+ vcpu->arch.state = KVMPPC_VCPU_STOPPED;
init_waitqueue_head(&vcpu->arch.cpu_run);
@@ -496,6 +441,7 @@
if (vcore) {
INIT_LIST_HEAD(&vcore->runnable_threads);
spin_lock_init(&vcore->lock);
+ init_waitqueue_head(&vcore->wq);
}
kvm->arch.vcores[core] = vcore;
}
@@ -506,10 +452,12 @@
spin_lock(&vcore->lock);
++vcore->num_threads;
- ++vcore->n_blocked;
spin_unlock(&vcore->lock);
vcpu->arch.vcore = vcore;
+ vcpu->arch.cpu_type = KVM_CPU_3S_64;
+ kvmppc_sanity_check(vcpu);
+
return vcpu;
free_vcpu:
@@ -524,30 +472,31 @@
kfree(vcpu);
}
-static void kvmppc_vcpu_blocked(struct kvm_vcpu *vcpu)
+static void kvmppc_set_timer(struct kvm_vcpu *vcpu)
{
- struct kvmppc_vcore *vc = vcpu->arch.vcore;
+ unsigned long dec_nsec, now;
- spin_lock(&vc->lock);
- vcpu->arch.state = KVMPPC_VCPU_BLOCKED;
- ++vc->n_blocked;
- if (vc->n_runnable > 0 &&
- vc->n_runnable + vc->n_blocked == vc->num_threads) {
- vcpu = list_first_entry(&vc->runnable_threads, struct kvm_vcpu,
- arch.run_list);
- wake_up(&vcpu->arch.cpu_run);
+ now = get_tb();
+ if (now > vcpu->arch.dec_expires) {
+ /* decrementer has already gone negative */
+ kvmppc_core_queue_dec(vcpu);
+ kvmppc_core_deliver_interrupts(vcpu);
+ return;
}
- spin_unlock(&vc->lock);
+ dec_nsec = (vcpu->arch.dec_expires - now) * NSEC_PER_SEC
+ / tb_ticks_per_sec;
+ hrtimer_start(&vcpu->arch.dec_timer, ktime_set(0, dec_nsec),
+ HRTIMER_MODE_REL);
+ vcpu->arch.timer_running = 1;
}
-static void kvmppc_vcpu_unblocked(struct kvm_vcpu *vcpu)
+static void kvmppc_end_cede(struct kvm_vcpu *vcpu)
{
- struct kvmppc_vcore *vc = vcpu->arch.vcore;
-
- spin_lock(&vc->lock);
- vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
- --vc->n_blocked;
- spin_unlock(&vc->lock);
+ vcpu->arch.ceded = 0;
+ if (vcpu->arch.timer_running) {
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+ vcpu->arch.timer_running = 0;
+ }
}
extern int __kvmppc_vcore_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
@@ -562,6 +511,7 @@
return;
vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
--vc->n_runnable;
+ ++vc->n_busy;
/* decrement the physical thread id of each following vcpu */
v = vcpu;
list_for_each_entry_continue(v, &vc->runnable_threads, arch.run_list)
@@ -575,15 +525,20 @@
struct paca_struct *tpaca;
struct kvmppc_vcore *vc = vcpu->arch.vcore;
+ if (vcpu->arch.timer_running) {
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+ vcpu->arch.timer_running = 0;
+ }
cpu = vc->pcpu + vcpu->arch.ptid;
tpaca = &paca[cpu];
tpaca->kvm_hstate.kvm_vcpu = vcpu;
tpaca->kvm_hstate.kvm_vcore = vc;
+ tpaca->kvm_hstate.napping = 0;
+ vcpu->cpu = vc->pcpu;
smp_wmb();
#ifdef CONFIG_PPC_ICP_NATIVE
if (vcpu->arch.ptid) {
tpaca->cpu_start = 0x80;
- tpaca->kvm_hstate.in_guest = KVM_GUEST_MODE_GUEST;
wmb();
xics_wake_cpu(cpu);
++vc->n_woken;
@@ -631,9 +586,10 @@
*/
static int kvmppc_run_core(struct kvmppc_vcore *vc)
{
- struct kvm_vcpu *vcpu, *vnext;
+ struct kvm_vcpu *vcpu, *vcpu0, *vnext;
long ret;
u64 now;
+ int ptid;
/* don't start if any threads have a signal pending */
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
@@ -652,29 +608,50 @@
goto out;
}
+ /*
+ * Assign physical thread IDs, first to non-ceded vcpus
+ * and then to ceded ones.
+ */
+ ptid = 0;
+ vcpu0 = NULL;
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
+ if (!vcpu->arch.ceded) {
+ if (!ptid)
+ vcpu0 = vcpu;
+ vcpu->arch.ptid = ptid++;
+ }
+ }
+ if (!vcpu0)
+ return 0; /* nothing to run */
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ if (vcpu->arch.ceded)
+ vcpu->arch.ptid = ptid++;
+
vc->n_woken = 0;
vc->nap_count = 0;
vc->entry_exit_count = 0;
- vc->vcore_running = 1;
+ vc->vcore_state = VCORE_RUNNING;
vc->in_guest = 0;
vc->pcpu = smp_processor_id();
+ vc->napping_threads = 0;
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
kvmppc_start_thread(vcpu);
- vcpu = list_first_entry(&vc->runnable_threads, struct kvm_vcpu,
- arch.run_list);
-
- spin_unlock(&vc->lock);
preempt_disable();
- kvm_guest_enter();
- __kvmppc_vcore_entry(NULL, vcpu);
+ spin_unlock(&vc->lock);
- /* wait for secondary threads to finish writing their state to memory */
+ kvm_guest_enter();
+ __kvmppc_vcore_entry(NULL, vcpu0);
+
spin_lock(&vc->lock);
+ /* disable sending of IPIs on virtual external irqs */
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ vcpu->cpu = -1;
+ /* wait for secondary threads to finish writing their state to memory */
if (vc->nap_count < vc->n_woken)
kvmppc_wait_for_nap(vc);
/* prevent other vcpu threads from doing kvmppc_start_thread() now */
- vc->vcore_running = 2;
+ vc->vcore_state = VCORE_EXITING;
spin_unlock(&vc->lock);
/* make sure updates to secondary vcpu structs are visible now */
@@ -690,22 +667,26 @@
if (now < vcpu->arch.dec_expires &&
kvmppc_core_pending_dec(vcpu))
kvmppc_core_dequeue_dec(vcpu);
- if (!vcpu->arch.trap) {
- if (signal_pending(vcpu->arch.run_task)) {
- vcpu->arch.kvm_run->exit_reason = KVM_EXIT_INTR;
- vcpu->arch.ret = -EINTR;
- }
- continue; /* didn't get to run */
- }
- ret = kvmppc_handle_exit(vcpu->arch.kvm_run, vcpu,
- vcpu->arch.run_task);
+
+ ret = RESUME_GUEST;
+ if (vcpu->arch.trap)
+ ret = kvmppc_handle_exit(vcpu->arch.kvm_run, vcpu,
+ vcpu->arch.run_task);
+
vcpu->arch.ret = ret;
vcpu->arch.trap = 0;
+
+ if (vcpu->arch.ceded) {
+ if (ret != RESUME_GUEST)
+ kvmppc_end_cede(vcpu);
+ else
+ kvmppc_set_timer(vcpu);
+ }
}
spin_lock(&vc->lock);
out:
- vc->vcore_running = 0;
+ vc->vcore_state = VCORE_INACTIVE;
list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads,
arch.run_list) {
if (vcpu->arch.ret != RESUME_GUEST) {
@@ -717,16 +698,145 @@
return 1;
}
-static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+/*
+ * Wait for some other vcpu thread to execute us, and
+ * wake us up when we need to handle something in the host.
+ */
+static void kvmppc_wait_for_exec(struct kvm_vcpu *vcpu, int wait_state)
{
- int ptid;
- int wait_state;
- struct kvmppc_vcore *vc;
DEFINE_WAIT(wait);
- /* No need to go into the guest when all we do is going out */
+ prepare_to_wait(&vcpu->arch.cpu_run, &wait, wait_state);
+ if (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE)
+ schedule();
+ finish_wait(&vcpu->arch.cpu_run, &wait);
+}
+
+/*
+ * All the vcpus in this vcore are idle, so wait for a decrementer
+ * or external interrupt to one of the vcpus. vc->lock is held.
+ */
+static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
+{
+ DEFINE_WAIT(wait);
+ struct kvm_vcpu *v;
+ int all_idle = 1;
+
+ prepare_to_wait(&vc->wq, &wait, TASK_INTERRUPTIBLE);
+ vc->vcore_state = VCORE_SLEEPING;
+ spin_unlock(&vc->lock);
+ list_for_each_entry(v, &vc->runnable_threads, arch.run_list) {
+ if (!v->arch.ceded || v->arch.pending_exceptions) {
+ all_idle = 0;
+ break;
+ }
+ }
+ if (all_idle)
+ schedule();
+ finish_wait(&vc->wq, &wait);
+ spin_lock(&vc->lock);
+ vc->vcore_state = VCORE_INACTIVE;
+}
+
+static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+{
+ int n_ceded;
+ int prev_state;
+ struct kvmppc_vcore *vc;
+ struct kvm_vcpu *v, *vn;
+
+ kvm_run->exit_reason = 0;
+ vcpu->arch.ret = RESUME_GUEST;
+ vcpu->arch.trap = 0;
+
+ /*
+ * Synchronize with other threads in this virtual core
+ */
+ vc = vcpu->arch.vcore;
+ spin_lock(&vc->lock);
+ vcpu->arch.ceded = 0;
+ vcpu->arch.run_task = current;
+ vcpu->arch.kvm_run = kvm_run;
+ prev_state = vcpu->arch.state;
+ vcpu->arch.state = KVMPPC_VCPU_RUNNABLE;
+ list_add_tail(&vcpu->arch.run_list, &vc->runnable_threads);
+ ++vc->n_runnable;
+
+ /*
+ * This happens the first time this is called for a vcpu.
+ * If the vcore is already running, we may be able to start
+ * this thread straight away and have it join in.
+ */
+ if (prev_state == KVMPPC_VCPU_STOPPED) {
+ if (vc->vcore_state == VCORE_RUNNING &&
+ VCORE_EXIT_COUNT(vc) == 0) {
+ vcpu->arch.ptid = vc->n_runnable - 1;
+ kvmppc_start_thread(vcpu);
+ }
+
+ } else if (prev_state == KVMPPC_VCPU_BUSY_IN_HOST)
+ --vc->n_busy;
+
+ while (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE &&
+ !signal_pending(current)) {
+ if (vc->n_busy || vc->vcore_state != VCORE_INACTIVE) {
+ spin_unlock(&vc->lock);
+ kvmppc_wait_for_exec(vcpu, TASK_INTERRUPTIBLE);
+ spin_lock(&vc->lock);
+ continue;
+ }
+ n_ceded = 0;
+ list_for_each_entry(v, &vc->runnable_threads, arch.run_list)
+ n_ceded += v->arch.ceded;
+ if (n_ceded == vc->n_runnable)
+ kvmppc_vcore_blocked(vc);
+ else
+ kvmppc_run_core(vc);
+
+ list_for_each_entry_safe(v, vn, &vc->runnable_threads,
+ arch.run_list) {
+ kvmppc_core_deliver_interrupts(v);
+ if (signal_pending(v->arch.run_task)) {
+ kvmppc_remove_runnable(vc, v);
+ v->stat.signal_exits++;
+ v->arch.kvm_run->exit_reason = KVM_EXIT_INTR;
+ v->arch.ret = -EINTR;
+ wake_up(&v->arch.cpu_run);
+ }
+ }
+ }
+
if (signal_pending(current)) {
- kvm_run->exit_reason = KVM_EXIT_INTR;
+ if (vc->vcore_state == VCORE_RUNNING ||
+ vc->vcore_state == VCORE_EXITING) {
+ spin_unlock(&vc->lock);
+ kvmppc_wait_for_exec(vcpu, TASK_UNINTERRUPTIBLE);
+ spin_lock(&vc->lock);
+ }
+ if (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE) {
+ kvmppc_remove_runnable(vc, vcpu);
+ vcpu->stat.signal_exits++;
+ kvm_run->exit_reason = KVM_EXIT_INTR;
+ vcpu->arch.ret = -EINTR;
+ }
+ }
+
+ spin_unlock(&vc->lock);
+ return vcpu->arch.ret;
+}
+
+int kvmppc_vcpu_run(struct kvm_run *run, struct kvm_vcpu *vcpu)
+{
+ int r;
+
+ if (!vcpu->arch.sane) {
+ run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ return -EINVAL;
+ }
+
+ /* No need to go into the guest when all we'll do is come back out */
+ if (signal_pending(current)) {
+ run->exit_reason = KVM_EXIT_INTR;
return -EINTR;
}
@@ -734,71 +844,10 @@
if (!vcpu->kvm->arch.rma && cpu_has_feature(CPU_FTR_ARCH_201))
return -EPERM;
- kvm_run->exit_reason = 0;
- vcpu->arch.ret = RESUME_GUEST;
- vcpu->arch.trap = 0;
-
flush_fp_to_thread(current);
flush_altivec_to_thread(current);
flush_vsx_to_thread(current);
-
- /*
- * Synchronize with other threads in this virtual core
- */
- vc = vcpu->arch.vcore;
- spin_lock(&vc->lock);
- /* This happens the first time this is called for a vcpu */
- if (vcpu->arch.state == KVMPPC_VCPU_BLOCKED)
- --vc->n_blocked;
- vcpu->arch.state = KVMPPC_VCPU_RUNNABLE;
- ptid = vc->n_runnable;
- vcpu->arch.run_task = current;
- vcpu->arch.kvm_run = kvm_run;
- vcpu->arch.ptid = ptid;
- list_add_tail(&vcpu->arch.run_list, &vc->runnable_threads);
- ++vc->n_runnable;
-
- wait_state = TASK_INTERRUPTIBLE;
- while (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE) {
- if (signal_pending(current)) {
- if (!vc->vcore_running) {
- kvm_run->exit_reason = KVM_EXIT_INTR;
- vcpu->arch.ret = -EINTR;
- break;
- }
- /* have to wait for vcore to stop executing guest */
- wait_state = TASK_UNINTERRUPTIBLE;
- smp_send_reschedule(vc->pcpu);
- }
-
- if (!vc->vcore_running &&
- vc->n_runnable + vc->n_blocked == vc->num_threads) {
- /* we can run now */
- if (kvmppc_run_core(vc))
- continue;
- }
-
- if (vc->vcore_running == 1 && VCORE_EXIT_COUNT(vc) == 0)
- kvmppc_start_thread(vcpu);
-
- /* wait for other threads to come in, or wait for vcore */
- prepare_to_wait(&vcpu->arch.cpu_run, &wait, wait_state);
- spin_unlock(&vc->lock);
- schedule();
- finish_wait(&vcpu->arch.cpu_run, &wait);
- spin_lock(&vc->lock);
- }
-
- if (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE)
- kvmppc_remove_runnable(vc, vcpu);
- spin_unlock(&vc->lock);
-
- return vcpu->arch.ret;
-}
-
-int kvmppc_vcpu_run(struct kvm_run *run, struct kvm_vcpu *vcpu)
-{
- int r;
+ vcpu->arch.wqp = &vcpu->arch.vcore->wq;
do {
r = kvmppc_run_vcpu(run, vcpu);
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index fcfe6b0..bacb0cf 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -110,39 +110,6 @@
return H_SUCCESS;
}
-static unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
- unsigned long pte_index)
-{
- unsigned long rb, va_low;
-
- rb = (v & ~0x7fUL) << 16; /* AVA field */
- va_low = pte_index >> 3;
- if (v & HPTE_V_SECONDARY)
- va_low = ~va_low;
- /* xor vsid from AVA */
- if (!(v & HPTE_V_1TB_SEG))
- va_low ^= v >> 12;
- else
- va_low ^= v >> 24;
- va_low &= 0x7ff;
- if (v & HPTE_V_LARGE) {
- rb |= 1; /* L field */
- if (cpu_has_feature(CPU_FTR_ARCH_206) &&
- (r & 0xff000)) {
- /* non-16MB large page, must be 64k */
- /* (masks depend on page size) */
- rb |= 0x1000; /* page encoding in LP field */
- rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
- rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
- }
- } else {
- /* 4kB page */
- rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
- }
- rb |= (v >> 54) & 0x300; /* B field */
- return rb;
-}
-
#define LOCK_TOKEN (*(u32 *)(&get_paca()->lock_token))
static inline int try_lock_tlbie(unsigned int *lock)
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index de29501..f422231 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -20,7 +20,10 @@
#include <asm/ppc_asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
+#include <asm/mmu.h>
#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/hvcall.h>
#include <asm/asm-offsets.h>
#include <asm/exception-64s.h>
@@ -49,7 +52,7 @@
b .
/*
- * Call kvmppc_handler_trampoline_enter in real mode.
+ * Call kvmppc_hv_entry in real mode.
* Must be called with interrupts hard-disabled.
*
* Input Registers:
@@ -89,6 +92,12 @@
kvm_start_guest:
ld r1,PACAEMERGSP(r13)
subi r1,r1,STACK_FRAME_OVERHEAD
+ ld r2,PACATOC(r13)
+
+ /* were we napping due to cede? */
+ lbz r0,HSTATE_NAPPING(r13)
+ cmpwi r0,0
+ bne kvm_end_cede
/* get vcpu pointer */
ld r4, HSTATE_KVM_VCPU(r13)
@@ -276,15 +285,9 @@
cmpwi r0,0
beq 20b
- /* Set LPCR. Set the MER bit if there is a pending external irq. */
+ /* Set LPCR and RMOR. */
10: ld r8,KVM_LPCR(r9)
- ld r0,VCPU_PENDING_EXC(r4)
- li r7,(1 << BOOK3S_IRQPRIO_EXTERNAL)
- oris r7,r7,(1 << BOOK3S_IRQPRIO_EXTERNAL_LEVEL)@h
- and. r0,r0,r7
- beq 11f
- ori r8,r8,LPCR_MER
-11: mtspr SPRN_LPCR,r8
+ mtspr SPRN_LPCR,r8
ld r8,KVM_RMOR(r9)
mtspr SPRN_RMOR,r8
isync
@@ -448,19 +451,50 @@
mtctr r6
mtxer r7
- /* Move SRR0 and SRR1 into the respective regs */
+kvmppc_cede_reentry: /* r4 = vcpu, r13 = paca */
ld r6, VCPU_SRR0(r4)
ld r7, VCPU_SRR1(r4)
- mtspr SPRN_SRR0, r6
- mtspr SPRN_SRR1, r7
-
ld r10, VCPU_PC(r4)
+ ld r11, VCPU_MSR(r4) /* r11 = vcpu->arch.msr & ~MSR_HV */
- ld r11, VCPU_MSR(r4) /* r10 = vcpu->arch.msr & ~MSR_HV */
rldicl r11, r11, 63 - MSR_HV_LG, 1
rotldi r11, r11, 1 + MSR_HV_LG
ori r11, r11, MSR_ME
+ /* Check if we can deliver an external or decrementer interrupt now */
+ ld r0,VCPU_PENDING_EXC(r4)
+ li r8,(1 << BOOK3S_IRQPRIO_EXTERNAL)
+ oris r8,r8,(1 << BOOK3S_IRQPRIO_EXTERNAL_LEVEL)@h
+ and r0,r0,r8
+ cmpdi cr1,r0,0
+ andi. r0,r11,MSR_EE
+ beq cr1,11f
+BEGIN_FTR_SECTION
+ mfspr r8,SPRN_LPCR
+ ori r8,r8,LPCR_MER
+ mtspr SPRN_LPCR,r8
+ isync
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
+ beq 5f
+ li r0,BOOK3S_INTERRUPT_EXTERNAL
+12: mr r6,r10
+ mr r10,r0
+ mr r7,r11
+ li r11,(MSR_ME << 1) | 1 /* synthesize MSR_SF | MSR_ME */
+ rotldi r11,r11,63
+ b 5f
+11: beq 5f
+ mfspr r0,SPRN_DEC
+ cmpwi r0,0
+ li r0,BOOK3S_INTERRUPT_DECREMENTER
+ blt 12b
+
+ /* Move SRR0 and SRR1 into the respective regs */
+5: mtspr SPRN_SRR0, r6
+ mtspr SPRN_SRR1, r7
+ li r0,0
+ stb r0,VCPU_CEDED(r4) /* cancel cede */
+
fast_guest_return:
mtspr SPRN_HSRR0,r10
mtspr SPRN_HSRR1,r11
@@ -574,21 +608,20 @@
/* See if this is something we can handle in real mode */
cmpwi r12,BOOK3S_INTERRUPT_SYSCALL
beq hcall_try_real_mode
-hcall_real_cont:
/* Check for mediated interrupts (could be done earlier really ...) */
BEGIN_FTR_SECTION
cmpwi r12,BOOK3S_INTERRUPT_EXTERNAL
bne+ 1f
- ld r5,VCPU_KVM(r9)
- ld r5,KVM_LPCR(r5)
andi. r0,r11,MSR_EE
beq 1f
+ mfspr r5,SPRN_LPCR
andi. r0,r5,LPCR_MER
bne bounce_ext_interrupt
1:
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
+hcall_real_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
/* Save DEC */
mfspr r5,SPRN_DEC
mftb r6
@@ -682,7 +715,7 @@
slbia
ptesync
-hdec_soon:
+hdec_soon: /* r9 = vcpu, r12 = trap, r13 = paca */
BEGIN_FTR_SECTION
b 32f
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
@@ -700,6 +733,7 @@
addi r0,r3,0x100
stwcx. r0,0,r6
bne 41b
+ lwsync
/*
* At this point we have an interrupt that we have to pass
@@ -713,18 +747,39 @@
* interrupt, since the other threads will already be on their
* way here in that case.
*/
+ cmpwi r3,0x100 /* Are we the first here? */
+ bge 43f
+ cmpwi r3,1 /* Are any other threads in the guest? */
+ ble 43f
cmpwi r12,BOOK3S_INTERRUPT_HV_DECREMENTER
beq 40f
- cmpwi r3,0x100 /* Are we the first here? */
- bge 40f
- cmpwi r3,1
- ble 40f
li r0,0
mtspr SPRN_HDEC,r0
40:
+ /*
+ * Send an IPI to any napping threads, since an HDEC interrupt
+ * doesn't wake CPUs up from nap.
+ */
+ lwz r3,VCORE_NAPPING_THREADS(r5)
+ lwz r4,VCPU_PTID(r9)
+ li r0,1
+ sldi r0,r0,r4
+ andc. r3,r3,r0 /* no sense IPI'ing ourselves */
+ beq 43f
+ mulli r4,r4,PACA_SIZE /* get paca for thread 0 */
+ subf r6,r4,r13
+42: andi. r0,r3,1
+ beq 44f
+ ld r8,HSTATE_XICS_PHYS(r6) /* get thread's XICS reg addr */
+ li r0,IPI_PRIORITY
+ li r7,XICS_QIRR
+ stbcix r0,r7,r8 /* trigger the IPI */
+44: srdi. r3,r3,1
+ addi r6,r6,PACA_SIZE
+ bne 42b
/* Secondary threads wait for primary to do partition switch */
- ld r4,VCPU_KVM(r9) /* pointer to struct kvm */
+43: ld r4,VCPU_KVM(r9) /* pointer to struct kvm */
ld r5,HSTATE_KVM_VCORE(r13)
lwz r3,VCPU_PTID(r9)
cmpwi r3,0
@@ -1077,7 +1132,6 @@
hcall_real_fallback:
li r12,BOOK3S_INTERRUPT_SYSCALL
ld r9, HSTATE_KVM_VCPU(r13)
- ld r11, VCPU_MSR(r9)
b hcall_real_cont
@@ -1139,7 +1193,7 @@
.long 0 /* 0xd4 */
.long 0 /* 0xd8 */
.long 0 /* 0xdc */
- .long 0 /* 0xe0 */
+ .long .kvmppc_h_cede - hcall_real_table
.long 0 /* 0xe4 */
.long 0 /* 0xe8 */
.long 0 /* 0xec */
@@ -1168,7 +1222,8 @@
mtspr SPRN_SRR0,r10
mtspr SPRN_SRR1,r11
li r10,BOOK3S_INTERRUPT_EXTERNAL
- LOAD_REG_IMMEDIATE(r11,MSR_SF | MSR_ME);
+ li r11,(MSR_ME << 1) | 1 /* synthesize MSR_SF | MSR_ME */
+ rotldi r11,r11,63
b fast_guest_return
_GLOBAL(kvmppc_h_set_dabr)
@@ -1177,6 +1232,178 @@
li r3,0
blr
+_GLOBAL(kvmppc_h_cede)
+ ori r11,r11,MSR_EE
+ std r11,VCPU_MSR(r3)
+ li r0,1
+ stb r0,VCPU_CEDED(r3)
+ sync /* order setting ceded vs. testing prodded */
+ lbz r5,VCPU_PRODDED(r3)
+ cmpwi r5,0
+ bne 1f
+ li r0,0 /* set trap to 0 to say hcall is handled */
+ stw r0,VCPU_TRAP(r3)
+ li r0,H_SUCCESS
+ std r0,VCPU_GPR(r3)(r3)
+BEGIN_FTR_SECTION
+ b 2f /* just send it up to host on 970 */
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
+
+ /*
+ * Set our bit in the bitmask of napping threads unless all the
+ * other threads are already napping, in which case we send this
+ * up to the host.
+ */
+ ld r5,HSTATE_KVM_VCORE(r13)
+ lwz r6,VCPU_PTID(r3)
+ lwz r8,VCORE_ENTRY_EXIT(r5)
+ clrldi r8,r8,56
+ li r0,1
+ sld r0,r0,r6
+ addi r6,r5,VCORE_NAPPING_THREADS
+31: lwarx r4,0,r6
+ or r4,r4,r0
+ popcntw r7,r4
+ cmpw r7,r8
+ bge 2f
+ stwcx. r4,0,r6
+ bne 31b
+ li r0,1
+ stb r0,HSTATE_NAPPING(r13)
+ /* order napping_threads update vs testing entry_exit_count */
+ lwsync
+ mr r4,r3
+ lwz r7,VCORE_ENTRY_EXIT(r5)
+ cmpwi r7,0x100
+ bge 33f /* another thread already exiting */
+
+/*
+ * Although not specifically required by the architecture, POWER7
+ * preserves the following registers in nap mode, even if an SMT mode
+ * switch occurs: SLB entries, PURR, SPURR, AMOR, UAMOR, AMR, SPRG0-3,
+ * DAR, DSISR, DABR, DABRX, DSCR, PMCx, MMCRx, SIAR, SDAR.
+ */
+ /* Save non-volatile GPRs */
+ std r14, VCPU_GPR(r14)(r3)
+ std r15, VCPU_GPR(r15)(r3)
+ std r16, VCPU_GPR(r16)(r3)
+ std r17, VCPU_GPR(r17)(r3)
+ std r18, VCPU_GPR(r18)(r3)
+ std r19, VCPU_GPR(r19)(r3)
+ std r20, VCPU_GPR(r20)(r3)
+ std r21, VCPU_GPR(r21)(r3)
+ std r22, VCPU_GPR(r22)(r3)
+ std r23, VCPU_GPR(r23)(r3)
+ std r24, VCPU_GPR(r24)(r3)
+ std r25, VCPU_GPR(r25)(r3)
+ std r26, VCPU_GPR(r26)(r3)
+ std r27, VCPU_GPR(r27)(r3)
+ std r28, VCPU_GPR(r28)(r3)
+ std r29, VCPU_GPR(r29)(r3)
+ std r30, VCPU_GPR(r30)(r3)
+ std r31, VCPU_GPR(r31)(r3)
+
+ /* save FP state */
+ bl .kvmppc_save_fp
+
+ /*
+ * Take a nap until a decrementer or external interrupt occurs,
+ * with PECE1 (wake on decr) and PECE0 (wake on external) set in LPCR
+ */
+ li r0,0x80
+ stb r0,PACAPROCSTART(r13)
+ mfspr r5,SPRN_LPCR
+ ori r5,r5,LPCR_PECE0 | LPCR_PECE1
+ mtspr SPRN_LPCR,r5
+ isync
+ li r0, 0
+ std r0, HSTATE_SCRATCH0(r13)
+ ptesync
+ ld r0, HSTATE_SCRATCH0(r13)
+1: cmpd r0, r0
+ bne 1b
+ nap
+ b .
+
+kvm_end_cede:
+ /* Woken by external or decrementer interrupt */
+ ld r1, HSTATE_HOST_R1(r13)
+ ld r2, PACATOC(r13)
+
+ /* If we're a secondary thread and we got here by an IPI, ack it */
+ ld r4,HSTATE_KVM_VCPU(r13)
+ lwz r3,VCPU_PTID(r4)
+ cmpwi r3,0
+ beq 27f
+ mfspr r3,SPRN_SRR1
+ rlwinm r3,r3,44-31,0x7 /* extract wake reason field */
+ cmpwi r3,4 /* was it an external interrupt? */
+ bne 27f
+ ld r5, HSTATE_XICS_PHYS(r13)
+ li r0,0xff
+ li r6,XICS_QIRR
+ li r7,XICS_XIRR
+ lwzcix r8,r5,r7 /* ack the interrupt */
+ sync
+ stbcix r0,r5,r6 /* clear it */
+ stwcix r8,r5,r7 /* EOI it */
+27:
+ /* load up FP state */
+ bl kvmppc_load_fp
+
+ /* Load NV GPRS */
+ ld r14, VCPU_GPR(r14)(r4)
+ ld r15, VCPU_GPR(r15)(r4)
+ ld r16, VCPU_GPR(r16)(r4)
+ ld r17, VCPU_GPR(r17)(r4)
+ ld r18, VCPU_GPR(r18)(r4)
+ ld r19, VCPU_GPR(r19)(r4)
+ ld r20, VCPU_GPR(r20)(r4)
+ ld r21, VCPU_GPR(r21)(r4)
+ ld r22, VCPU_GPR(r22)(r4)
+ ld r23, VCPU_GPR(r23)(r4)
+ ld r24, VCPU_GPR(r24)(r4)
+ ld r25, VCPU_GPR(r25)(r4)
+ ld r26, VCPU_GPR(r26)(r4)
+ ld r27, VCPU_GPR(r27)(r4)
+ ld r28, VCPU_GPR(r28)(r4)
+ ld r29, VCPU_GPR(r29)(r4)
+ ld r30, VCPU_GPR(r30)(r4)
+ ld r31, VCPU_GPR(r31)(r4)
+
+ /* clear our bit in vcore->napping_threads */
+33: ld r5,HSTATE_KVM_VCORE(r13)
+ lwz r3,VCPU_PTID(r4)
+ li r0,1
+ sld r0,r0,r3
+ addi r6,r5,VCORE_NAPPING_THREADS
+32: lwarx r7,0,r6
+ andc r7,r7,r0
+ stwcx. r7,0,r6
+ bne 32b
+ li r0,0
+ stb r0,HSTATE_NAPPING(r13)
+
+ /* see if any other thread is already exiting */
+ lwz r0,VCORE_ENTRY_EXIT(r5)
+ cmpwi r0,0x100
+ blt kvmppc_cede_reentry /* if not go back to guest */
+
+ /* some threads are exiting, so go to the guest exit path */
+ b hcall_real_fallback
+
+ /* cede when already previously prodded case */
+1: li r0,0
+ stb r0,VCPU_PRODDED(r3)
+ sync /* order testing prodded vs. clearing ceded */
+ stb r0,VCPU_CEDED(r3)
+ li r3,H_SUCCESS
+ blr
+
+ /* we've ceded but we want to give control to the host */
+2: li r3,H_TOO_HARD
+ blr
+
secondary_too_late:
ld r5,HSTATE_KVM_VCORE(r13)
HMT_LOW
@@ -1194,14 +1421,20 @@
slbmte r6,r5
1: addi r11,r11,16
.endr
- b 50f
secondary_nap:
- /* Clear any pending IPI */
-50: ld r5, HSTATE_XICS_PHYS(r13)
+ /* Clear any pending IPI - assume we're a secondary thread */
+ ld r5, HSTATE_XICS_PHYS(r13)
+ li r7, XICS_XIRR
+ lwzcix r3, r5, r7 /* ack any pending interrupt */
+ rlwinm. r0, r3, 0, 0xffffff /* any pending? */
+ beq 37f
+ sync
li r0, 0xff
li r6, XICS_QIRR
- stbcix r0, r5, r6
+ stbcix r0, r5, r6 /* clear the IPI */
+ stwcix r3, r5, r7 /* EOI it */
+37: sync
/* increment the nap count and then go to nap mode */
ld r4, HSTATE_KVM_VCORE(r13)
@@ -1211,13 +1444,12 @@
addi r3, r3, 1
stwcx. r3, 0, r4
bne 51b
- isync
+ li r3, LPCR_PECE0
mfspr r4, SPRN_LPCR
- li r0, LPCR_PECE
- andc r4, r4, r0
- ori r4, r4, LPCR_PECE0 /* exit nap on interrupt */
+ rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1
mtspr SPRN_LPCR, r4
+ isync
li r0, 0
std r0, HSTATE_SCRATCH0(r13)
ptesync
diff --git a/arch/powerpc/kvm/book3s_interrupts.S b/arch/powerpc/kvm/book3s_interrupts.S
index c54b0e3..0a8515a 100644
--- a/arch/powerpc/kvm/book3s_interrupts.S
+++ b/arch/powerpc/kvm/book3s_interrupts.S
@@ -29,27 +29,11 @@
#define ULONG_SIZE 8
#define FUNC(name) GLUE(.,name)
-#define GET_SHADOW_VCPU_R13
-
-#define DISABLE_INTERRUPTS \
- mfmsr r0; \
- rldicl r0,r0,48,1; \
- rotldi r0,r0,16; \
- mtmsrd r0,1; \
-
#elif defined(CONFIG_PPC_BOOK3S_32)
#define ULONG_SIZE 4
#define FUNC(name) name
-#define GET_SHADOW_VCPU_R13 \
- lwz r13, (THREAD + THREAD_KVM_SVCPU)(r2)
-
-#define DISABLE_INTERRUPTS \
- mfmsr r0; \
- rlwinm r0,r0,0,17,15; \
- mtmsr r0; \
-
#endif /* CONFIG_PPC_BOOK3S_XX */
@@ -108,44 +92,17 @@
kvm_start_lightweight:
- GET_SHADOW_VCPU_R13
- PPC_LL r3, VCPU_HIGHMEM_HANDLER(r4)
- PPC_STL r3, HSTATE_VMHANDLER(r13)
-
- PPC_LL r10, VCPU_SHADOW_MSR(r4) /* r10 = vcpu->arch.shadow_msr */
-
- DISABLE_INTERRUPTS
-
#ifdef CONFIG_PPC_BOOK3S_64
- /* Some guests may need to have dcbz set to 32 byte length.
- *
- * Usually we ensure that by patching the guest's instructions
- * to trap on dcbz and emulate it in the hypervisor.
- *
- * If we can, we should tell the CPU to use 32 byte dcbz though,
- * because that's a lot faster.
- */
-
PPC_LL r3, VCPU_HFLAGS(r4)
- rldicl. r3, r3, 0, 63 /* CR = ((r3 & 1) == 0) */
- beq no_dcbz32_on
-
- mfspr r3,SPRN_HID5
- ori r3, r3, 0x80 /* XXX HID5_dcbz32 = 0x80 */
- mtspr SPRN_HID5,r3
-
-no_dcbz32_on:
-
+ rldicl r3, r3, 0, 63 /* r3 &= 1 */
+ stb r3, HSTATE_RESTORE_HID5(r13)
#endif /* CONFIG_PPC_BOOK3S_64 */
- PPC_LL r6, VCPU_RMCALL(r4)
- mtctr r6
-
- PPC_LL r3, VCPU_TRAMPOLINE_ENTER(r4)
- LOAD_REG_IMMEDIATE(r4, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+ PPC_LL r4, VCPU_SHADOW_MSR(r4) /* get shadow_msr */
/* Jump to segment patching handler and into our guest */
- bctr
+ bl FUNC(kvmppc_entry_trampoline)
+ nop
/*
* This is the handler in module memory. It gets jumped at from the
@@ -170,21 +127,6 @@
/* R7 = vcpu */
PPC_LL r7, GPR4(r1)
-#ifdef CONFIG_PPC_BOOK3S_64
-
- PPC_LL r5, VCPU_HFLAGS(r7)
- rldicl. r5, r5, 0, 63 /* CR = ((r5 & 1) == 0) */
- beq no_dcbz32_off
-
- li r4, 0
- mfspr r5,SPRN_HID5
- rldimi r5,r4,6,56
- mtspr SPRN_HID5,r5
-
-no_dcbz32_off:
-
-#endif /* CONFIG_PPC_BOOK3S_64 */
-
PPC_STL r14, VCPU_GPR(r14)(r7)
PPC_STL r15, VCPU_GPR(r15)(r7)
PPC_STL r16, VCPU_GPR(r16)(r7)
@@ -204,67 +146,6 @@
PPC_STL r30, VCPU_GPR(r30)(r7)
PPC_STL r31, VCPU_GPR(r31)(r7)
- /* Restore host msr -> SRR1 */
- PPC_LL r6, VCPU_HOST_MSR(r7)
-
- /*
- * For some interrupts, we need to call the real Linux
- * handler, so it can do work for us. This has to happen
- * as if the interrupt arrived from the kernel though,
- * so let's fake it here where most state is restored.
- *
- * Call Linux for hardware interrupts/decrementer
- * r3 = address of interrupt handler (exit reason)
- */
-
- cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL
- beq call_linux_handler
- cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER
- beq call_linux_handler
- cmpwi r12, BOOK3S_INTERRUPT_PERFMON
- beq call_linux_handler
-
- /* Back to EE=1 */
- mtmsr r6
- sync
- b kvm_return_point
-
-call_linux_handler:
-
- /*
- * If we land here we need to jump back to the handler we
- * came from.
- *
- * We have a page that we can access from real mode, so let's
- * jump back to that and use it as a trampoline to get back into the
- * interrupt handler!
- *
- * R3 still contains the exit code,
- * R5 VCPU_HOST_RETIP and
- * R6 VCPU_HOST_MSR
- */
-
- /* Restore host IP -> SRR0 */
- PPC_LL r5, VCPU_HOST_RETIP(r7)
-
- /* XXX Better move to a safe function?
- * What if we get an HTAB flush in between mtsrr0 and mtsrr1? */
-
- mtlr r12
-
- PPC_LL r4, VCPU_TRAMPOLINE_LOWMEM(r7)
- mtsrr0 r4
- LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
- mtsrr1 r3
-
- RFI
-
-.global kvm_return_point
-kvm_return_point:
-
- /* Jump back to lightweight entry if we're supposed to */
- /* go back into the guest */
-
/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
mr r5, r12
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 0c0d3f2..d417511 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -150,16 +150,22 @@
#ifdef CONFIG_PPC_BOOK3S_64
if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
kvmppc_mmu_book3s_64_init(vcpu);
- to_book3s(vcpu)->hior = 0xfff00000;
+ if (!to_book3s(vcpu)->hior_sregs)
+ to_book3s(vcpu)->hior = 0xfff00000;
to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
+ vcpu->arch.cpu_type = KVM_CPU_3S_64;
} else
#endif
{
kvmppc_mmu_book3s_32_init(vcpu);
- to_book3s(vcpu)->hior = 0;
+ if (!to_book3s(vcpu)->hior_sregs)
+ to_book3s(vcpu)->hior = 0;
to_book3s(vcpu)->msr_mask = 0xffffffffULL;
+ vcpu->arch.cpu_type = KVM_CPU_3S_32;
}
+ kvmppc_sanity_check(vcpu);
+
/* If we are in hypervisor level on 970, we can tell the CPU to
* treat DCBZ as 32 bytes store */
vcpu->arch.hflags &= ~BOOK3S_HFLAG_DCBZ32;
@@ -646,7 +652,27 @@
break;
}
case BOOK3S_INTERRUPT_SYSCALL:
- if (vcpu->arch.osi_enabled &&
+ if (vcpu->arch.papr_enabled &&
+ (kvmppc_get_last_inst(vcpu) == 0x44000022) &&
+ !(vcpu->arch.shared->msr & MSR_PR)) {
+ /* SC 1 papr hypercalls */
+ ulong cmd = kvmppc_get_gpr(vcpu, 3);
+ int i;
+
+ if (kvmppc_h_pr(vcpu, cmd) == EMULATE_DONE) {
+ r = RESUME_GUEST;
+ break;
+ }
+
+ run->papr_hcall.nr = cmd;
+ for (i = 0; i < 9; ++i) {
+ ulong gpr = kvmppc_get_gpr(vcpu, 4 + i);
+ run->papr_hcall.args[i] = gpr;
+ }
+ run->exit_reason = KVM_EXIT_PAPR_HCALL;
+ vcpu->arch.hcall_needed = 1;
+ r = RESUME_HOST;
+ } else if (vcpu->arch.osi_enabled &&
(((u32)kvmppc_get_gpr(vcpu, 3)) == OSI_SC_MAGIC_R3) &&
(((u32)kvmppc_get_gpr(vcpu, 4)) == OSI_SC_MAGIC_R4)) {
/* MOL hypercalls */
@@ -770,6 +796,9 @@
}
}
+ if (sregs->u.s.flags & KVM_SREGS_S_HIOR)
+ sregs->u.s.hior = to_book3s(vcpu)->hior;
+
return 0;
}
@@ -806,6 +835,11 @@
/* Flush the MMU after messing with the segments */
kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ if (sregs->u.s.flags & KVM_SREGS_S_HIOR) {
+ to_book3s(vcpu)->hior_sregs = true;
+ to_book3s(vcpu)->hior = sregs->u.s.hior;
+ }
+
return 0;
}
@@ -841,8 +875,6 @@
if (!p)
goto uninit_vcpu;
- vcpu->arch.host_retip = kvm_return_point;
- vcpu->arch.host_msr = mfmsr();
#ifdef CONFIG_PPC_BOOK3S_64
/* default to book3s_64 (970fx) */
vcpu->arch.pvr = 0x3C0301;
@@ -853,16 +885,6 @@
kvmppc_set_pvr(vcpu, vcpu->arch.pvr);
vcpu->arch.slb_nr = 64;
- /* remember where some real-mode handlers are */
- vcpu->arch.trampoline_lowmem = __pa(kvmppc_handler_lowmem_trampoline);
- vcpu->arch.trampoline_enter = __pa(kvmppc_handler_trampoline_enter);
- vcpu->arch.highmem_handler = (ulong)kvmppc_handler_highmem;
-#ifdef CONFIG_PPC_BOOK3S_64
- vcpu->arch.rmcall = *(ulong*)kvmppc_rmcall;
-#else
- vcpu->arch.rmcall = (ulong)kvmppc_rmcall;
-#endif
-
vcpu->arch.shadow_msr = MSR_USER64;
err = kvmppc_mmu_init(vcpu);
@@ -908,6 +930,12 @@
#endif
ulong ext_msr;
+ /* Check if we can run the vcpu at all */
+ if (!vcpu->arch.sane) {
+ kvm_run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ return -EINVAL;
+ }
+
/* No need to go into the guest when all we do is going out */
if (signal_pending(current)) {
kvm_run->exit_reason = KVM_EXIT_INTR;
diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c
new file mode 100644
index 0000000..b958932
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_pr_papr.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2011. Freescale Inc. All rights reserved.
+ *
+ * Authors:
+ * Alexander Graf <agraf@suse.de>
+ * Paul Mackerras <paulus@samba.org>
+ *
+ * Description:
+ *
+ * Hypercall handling for running PAPR guests in PR KVM on Book 3S
+ * processors.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/uaccess.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+
+static unsigned long get_pteg_addr(struct kvm_vcpu *vcpu, long pte_index)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ unsigned long pteg_addr;
+
+ pte_index <<= 4;
+ pte_index &= ((1 << ((vcpu_book3s->sdr1 & 0x1f) + 11)) - 1) << 7 | 0x70;
+ pteg_addr = vcpu_book3s->sdr1 & 0xfffffffffffc0000ULL;
+ pteg_addr |= pte_index;
+
+ return pteg_addr;
+}
+
+static int kvmppc_h_pr_enter(struct kvm_vcpu *vcpu)
+{
+ long flags = kvmppc_get_gpr(vcpu, 4);
+ long pte_index = kvmppc_get_gpr(vcpu, 5);
+ unsigned long pteg[2 * 8];
+ unsigned long pteg_addr, i, *hpte;
+
+ pte_index &= ~7UL;
+ pteg_addr = get_pteg_addr(vcpu, pte_index);
+
+ copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
+ hpte = pteg;
+
+ if (likely((flags & H_EXACT) == 0)) {
+ pte_index &= ~7UL;
+ for (i = 0; ; ++i) {
+ if (i == 8)
+ return H_PTEG_FULL;
+ if ((*hpte & HPTE_V_VALID) == 0)
+ break;
+ hpte += 2;
+ }
+ } else {
+ i = kvmppc_get_gpr(vcpu, 5) & 7UL;
+ hpte += i * 2;
+ }
+
+ hpte[0] = kvmppc_get_gpr(vcpu, 6);
+ hpte[1] = kvmppc_get_gpr(vcpu, 7);
+ copy_to_user((void __user *)pteg_addr, pteg, sizeof(pteg));
+ kvmppc_set_gpr(vcpu, 3, H_SUCCESS);
+ kvmppc_set_gpr(vcpu, 4, pte_index | i);
+
+ return EMULATE_DONE;
+}
+
+static int kvmppc_h_pr_remove(struct kvm_vcpu *vcpu)
+{
+ unsigned long flags= kvmppc_get_gpr(vcpu, 4);
+ unsigned long pte_index = kvmppc_get_gpr(vcpu, 5);
+ unsigned long avpn = kvmppc_get_gpr(vcpu, 6);
+ unsigned long v = 0, pteg, rb;
+ unsigned long pte[2];
+
+ pteg = get_pteg_addr(vcpu, pte_index);
+ copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+
+ if ((pte[0] & HPTE_V_VALID) == 0 ||
+ ((flags & H_AVPN) && (pte[0] & ~0x7fUL) != avpn) ||
+ ((flags & H_ANDCOND) && (pte[0] & avpn) != 0)) {
+ kvmppc_set_gpr(vcpu, 3, H_NOT_FOUND);
+ return EMULATE_DONE;
+ }
+
+ copy_to_user((void __user *)pteg, &v, sizeof(v));
+
+ rb = compute_tlbie_rb(pte[0], pte[1], pte_index);
+ vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
+
+ kvmppc_set_gpr(vcpu, 3, H_SUCCESS);
+ kvmppc_set_gpr(vcpu, 4, pte[0]);
+ kvmppc_set_gpr(vcpu, 5, pte[1]);
+
+ return EMULATE_DONE;
+}
+
+static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu)
+{
+ unsigned long flags = kvmppc_get_gpr(vcpu, 4);
+ unsigned long pte_index = kvmppc_get_gpr(vcpu, 5);
+ unsigned long avpn = kvmppc_get_gpr(vcpu, 6);
+ unsigned long rb, pteg, r, v;
+ unsigned long pte[2];
+
+ pteg = get_pteg_addr(vcpu, pte_index);
+ copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+
+ if ((pte[0] & HPTE_V_VALID) == 0 ||
+ ((flags & H_AVPN) && (pte[0] & ~0x7fUL) != avpn)) {
+ kvmppc_set_gpr(vcpu, 3, H_NOT_FOUND);
+ return EMULATE_DONE;
+ }
+
+ v = pte[0];
+ r = pte[1];
+ r &= ~(HPTE_R_PP0 | HPTE_R_PP | HPTE_R_N | HPTE_R_KEY_HI |
+ HPTE_R_KEY_LO);
+ r |= (flags << 55) & HPTE_R_PP0;
+ r |= (flags << 48) & HPTE_R_KEY_HI;
+ r |= flags & (HPTE_R_PP | HPTE_R_N | HPTE_R_KEY_LO);
+
+ pte[1] = r;
+
+ rb = compute_tlbie_rb(v, r, pte_index);
+ vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
+ copy_to_user((void __user *)pteg, pte, sizeof(pte));
+
+ kvmppc_set_gpr(vcpu, 3, H_SUCCESS);
+
+ return EMULATE_DONE;
+}
+
+int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd)
+{
+ switch (cmd) {
+ case H_ENTER:
+ return kvmppc_h_pr_enter(vcpu);
+ case H_REMOVE:
+ return kvmppc_h_pr_remove(vcpu);
+ case H_PROTECT:
+ return kvmppc_h_pr_protect(vcpu);
+ case H_BULK_REMOVE:
+ /* We just flush all PTEs, so user space can
+ handle the HPT modifications */
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ break;
+ case H_CEDE:
+ kvm_vcpu_block(vcpu);
+ vcpu->stat.halt_wakeup++;
+ return EMULATE_DONE;
+ }
+
+ return EMULATE_FAIL;
+}
diff --git a/arch/powerpc/kvm/book3s_rmhandlers.S b/arch/powerpc/kvm/book3s_rmhandlers.S
index c1f877c..3418758 100644
--- a/arch/powerpc/kvm/book3s_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_rmhandlers.S
@@ -20,6 +20,7 @@
#include <asm/ppc_asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
+#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
@@ -35,10 +36,10 @@
#if defined(CONFIG_PPC_BOOK3S_64)
-#define LOAD_SHADOW_VCPU(reg) GET_PACA(reg)
-#define MSR_NOIRQ MSR_KERNEL & ~(MSR_IR | MSR_DR)
#define FUNC(name) GLUE(.,name)
+#define MTMSR_EERI(reg) mtmsrd (reg),1
+ .globl kvmppc_skip_interrupt
kvmppc_skip_interrupt:
/*
* Here all GPRs are unchanged from when the interrupt happened
@@ -51,6 +52,7 @@
rfid
b .
+ .globl kvmppc_skip_Hinterrupt
kvmppc_skip_Hinterrupt:
/*
* Here all GPRs are unchanged from when the interrupt happened
@@ -65,8 +67,8 @@
#elif defined(CONFIG_PPC_BOOK3S_32)
-#define MSR_NOIRQ MSR_KERNEL
#define FUNC(name) name
+#define MTMSR_EERI(reg) mtmsr (reg)
.macro INTERRUPT_TRAMPOLINE intno
@@ -167,40 +169,24 @@
#endif
/*
- * This trampoline brings us back to a real mode handler
+ * Call kvmppc_handler_trampoline_enter in real mode
*
- * Input Registers:
- *
- * R5 = SRR0
- * R6 = SRR1
- * LR = real-mode IP
- *
+ * On entry, r4 contains the guest shadow MSR
*/
-.global kvmppc_handler_lowmem_trampoline
-kvmppc_handler_lowmem_trampoline:
+_GLOBAL(kvmppc_entry_trampoline)
+ mfmsr r5
+ LOAD_REG_ADDR(r7, kvmppc_handler_trampoline_enter)
+ toreal(r7)
- mtsrr0 r5
+ li r9, MSR_RI
+ ori r9, r9, MSR_EE
+ andc r9, r5, r9 /* Clear EE and RI in MSR value */
+ li r6, MSR_IR | MSR_DR
+ ori r6, r6, MSR_EE
+ andc r6, r5, r6 /* Clear EE, DR and IR in MSR value */
+ MTMSR_EERI(r9) /* Clear EE and RI in MSR */
+ mtsrr0 r7 /* before we set srr0/1 */
mtsrr1 r6
- blr
-kvmppc_handler_lowmem_trampoline_end:
-
-/*
- * Call a function in real mode
- *
- * Input Registers:
- *
- * R3 = function
- * R4 = MSR
- * R5 = scratch register
- *
- */
-_GLOBAL(kvmppc_rmcall)
- LOAD_REG_IMMEDIATE(r5, MSR_NOIRQ)
- mtmsr r5 /* Disable relocation and interrupts, so mtsrr
- doesn't get interrupted */
- sync
- mtsrr0 r3
- mtsrr1 r4
RFI
#if defined(CONFIG_PPC_BOOK3S_32)
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index aed32e5..0676ae2 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -23,6 +23,7 @@
#define GET_SHADOW_VCPU(reg) \
mr reg, r13
+#define MTMSR_EERI(reg) mtmsrd (reg),1
#elif defined(CONFIG_PPC_BOOK3S_32)
@@ -30,6 +31,7 @@
tophys(reg, r2); \
lwz reg, (THREAD + THREAD_KVM_SVCPU)(reg); \
tophys(reg, reg)
+#define MTMSR_EERI(reg) mtmsr (reg)
#endif
@@ -57,10 +59,12 @@
/* Required state:
*
* MSR = ~IR|DR
- * R13 = PACA
* R1 = host R1
* R2 = host R2
- * R10 = guest MSR
+ * R4 = guest shadow MSR
+ * R5 = normal host MSR
+ * R6 = current host MSR (EE, IR, DR off)
+ * LR = highmem guest exit code
* all other volatile GPRS = free
* SVCPU[CR] = guest CR
* SVCPU[XER] = guest XER
@@ -71,15 +75,15 @@
/* r3 = shadow vcpu */
GET_SHADOW_VCPU(r3)
+ /* Save guest exit handler address and MSR */
+ mflr r0
+ PPC_STL r0, HSTATE_VMHANDLER(r3)
+ PPC_STL r5, HSTATE_HOST_MSR(r3)
+
/* Save R1/R2 in the PACA (64-bit) or shadow_vcpu (32-bit) */
PPC_STL r1, HSTATE_HOST_R1(r3)
PPC_STL r2, HSTATE_HOST_R2(r3)
- /* Move SRR0 and SRR1 into the respective regs */
- PPC_LL r9, SVCPU_PC(r3)
- mtsrr0 r9
- mtsrr1 r10
-
/* Activate guest mode, so faults get handled by KVM */
li r11, KVM_GUEST_MODE_GUEST
stb r11, HSTATE_IN_GUEST(r3)
@@ -87,17 +91,46 @@
/* Switch to guest segment. This is subarch specific. */
LOAD_GUEST_SEGMENTS
+#ifdef CONFIG_PPC_BOOK3S_64
+ /* Some guests may need to have dcbz set to 32 byte length.
+ *
+ * Usually we ensure that by patching the guest's instructions
+ * to trap on dcbz and emulate it in the hypervisor.
+ *
+ * If we can, we should tell the CPU to use 32 byte dcbz though,
+ * because that's a lot faster.
+ */
+ lbz r0, HSTATE_RESTORE_HID5(r3)
+ cmpwi r0, 0
+ beq no_dcbz32_on
+
+ mfspr r0,SPRN_HID5
+ ori r0, r0, 0x80 /* XXX HID5_dcbz32 = 0x80 */
+ mtspr SPRN_HID5,r0
+no_dcbz32_on:
+
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
/* Enter guest */
- PPC_LL r4, SVCPU_CTR(r3)
- PPC_LL r5, SVCPU_LR(r3)
- lwz r6, SVCPU_CR(r3)
- lwz r7, SVCPU_XER(r3)
+ PPC_LL r8, SVCPU_CTR(r3)
+ PPC_LL r9, SVCPU_LR(r3)
+ lwz r10, SVCPU_CR(r3)
+ lwz r11, SVCPU_XER(r3)
- mtctr r4
- mtlr r5
- mtcr r6
- mtxer r7
+ mtctr r8
+ mtlr r9
+ mtcr r10
+ mtxer r11
+
+ /* Move SRR0 and SRR1 into the respective regs */
+ PPC_LL r9, SVCPU_PC(r3)
+ /* First clear RI in our current MSR value */
+ li r0, MSR_RI
+ andc r6, r6, r0
+ MTMSR_EERI(r6)
+ mtsrr0 r9
+ mtsrr1 r4
PPC_LL r0, SVCPU_R0(r3)
PPC_LL r1, SVCPU_R1(r3)
@@ -213,11 +246,16 @@
beq ld_last_inst
cmpwi r12, BOOK3S_INTERRUPT_PROGRAM
beq ld_last_inst
+ cmpwi r12, BOOK3S_INTERRUPT_SYSCALL
+ beq ld_last_prev_inst
cmpwi r12, BOOK3S_INTERRUPT_ALIGNMENT
beq- ld_last_inst
b no_ld_last_inst
+ld_last_prev_inst:
+ addi r3, r3, -4
+
ld_last_inst:
/* Save off the guest instruction we're at */
@@ -254,6 +292,43 @@
/* Switch back to host MMU */
LOAD_HOST_SEGMENTS
+#ifdef CONFIG_PPC_BOOK3S_64
+
+ lbz r5, HSTATE_RESTORE_HID5(r13)
+ cmpwi r5, 0
+ beq no_dcbz32_off
+
+ li r4, 0
+ mfspr r5,SPRN_HID5
+ rldimi r5,r4,6,56
+ mtspr SPRN_HID5,r5
+
+no_dcbz32_off:
+
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
+ /*
+ * For some interrupts, we need to call the real Linux
+ * handler, so it can do work for us. This has to happen
+ * as if the interrupt arrived from the kernel though,
+ * so let's fake it here where most state is restored.
+ *
+ * Having set up SRR0/1 with the address where we want
+ * to continue with relocation on (potentially in module
+ * space), we either just go straight there with rfi[d],
+ * or we jump to an interrupt handler with bctr if there
+ * is an interrupt to be handled first. In the latter
+ * case, the rfi[d] at the end of the interrupt handler
+ * will get us back to where we want to continue.
+ */
+
+ cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL
+ beq 1f
+ cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER
+ beq 1f
+ cmpwi r12, BOOK3S_INTERRUPT_PERFMON
+1: mtctr r12
+
/* Register usage at this point:
*
* R1 = host R1
@@ -264,13 +339,15 @@
*
*/
- /* RFI into the highmem handler */
- mfmsr r7
- ori r7, r7, MSR_IR|MSR_DR|MSR_RI|MSR_ME /* Enable paging */
- mtsrr1 r7
- /* Load highmem handler address */
+ PPC_LL r6, HSTATE_HOST_MSR(r13)
PPC_LL r8, HSTATE_VMHANDLER(r13)
+
+ /* Restore host msr -> SRR1 */
+ mtsrr1 r6
+ /* Load highmem handler address */
mtsrr0 r8
+ /* RFI into the highmem handler, or jump to interrupt handler */
+ beqctr
RFI
kvmppc_handler_trampoline_exit_end:
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index ee45fa0..bb6c988 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -316,6 +316,11 @@
{
int ret;
+ if (!vcpu->arch.sane) {
+ kvm_run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ return -EINVAL;
+ }
+
local_irq_disable();
kvm_guest_enter();
ret = __kvmppc_vcpu_run(kvm_run, vcpu);
@@ -618,6 +623,7 @@
int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
int i;
+ int r;
vcpu->arch.pc = 0;
vcpu->arch.shared->msr = 0;
@@ -634,7 +640,9 @@
kvmppc_init_timing_stats(vcpu);
- return kvmppc_core_vcpu_setup(vcpu);
+ r = kvmppc_core_vcpu_setup(vcpu);
+ kvmppc_sanity_check(vcpu);
+ return r;
}
int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 797a744..26d20903 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -73,6 +73,8 @@
/* Since booke kvm only support one core, update all vcpus' PIR to 0 */
vcpu->vcpu_id = 0;
+ vcpu->arch.cpu_type = KVM_CPU_E500V2;
+
return 0;
}
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index a107c9b..0d843c6 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -39,12 +39,8 @@
int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
{
-#ifndef CONFIG_KVM_BOOK3S_64_HV
return !(v->arch.shared->msr & MSR_WE) ||
!!(v->arch.pending_exceptions);
-#else
- return !(v->arch.ceded) || !!(v->arch.pending_exceptions);
-#endif
}
int kvmppc_kvm_pv(struct kvm_vcpu *vcpu)
@@ -95,6 +91,31 @@
return r;
}
+int kvmppc_sanity_check(struct kvm_vcpu *vcpu)
+{
+ int r = false;
+
+ /* We have to know what CPU to virtualize */
+ if (!vcpu->arch.pvr)
+ goto out;
+
+ /* PAPR only works with book3s_64 */
+ if ((vcpu->arch.cpu_type != KVM_CPU_3S_64) && vcpu->arch.papr_enabled)
+ goto out;
+
+#ifdef CONFIG_KVM_BOOK3S_64_HV
+ /* HV KVM can only do PAPR mode for now */
+ if (!vcpu->arch.papr_enabled)
+ goto out;
+#endif
+
+ r = true;
+
+out:
+ vcpu->arch.sane = r;
+ return r ? 0 : -EINVAL;
+}
+
int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu)
{
enum emulation_result er;
@@ -188,6 +209,8 @@
case KVM_CAP_PPC_BOOKE_SREGS:
#else
case KVM_CAP_PPC_SEGSTATE:
+ case KVM_CAP_PPC_HIOR:
+ case KVM_CAP_PPC_PAPR:
#endif
case KVM_CAP_PPC_UNSET_IRQ:
case KVM_CAP_PPC_IRQ_LEVEL:
@@ -258,6 +281,7 @@
{
struct kvm_vcpu *vcpu;
vcpu = kvmppc_core_vcpu_create(kvm, id);
+ vcpu->arch.wqp = &vcpu->wq;
if (!IS_ERR(vcpu))
kvmppc_create_vcpu_debugfs(vcpu, id);
return vcpu;
@@ -289,8 +313,8 @@
kvmppc_core_queue_dec(vcpu);
- if (waitqueue_active(&vcpu->wq)) {
- wake_up_interruptible(&vcpu->wq);
+ if (waitqueue_active(vcpu->arch.wqp)) {
+ wake_up_interruptible(vcpu->arch.wqp);
vcpu->stat.halt_wakeup++;
}
}
@@ -543,13 +567,15 @@
int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
{
- if (irq->irq == KVM_INTERRUPT_UNSET)
+ if (irq->irq == KVM_INTERRUPT_UNSET) {
kvmppc_core_dequeue_external(vcpu, irq);
- else
- kvmppc_core_queue_external(vcpu, irq);
+ return 0;
+ }
- if (waitqueue_active(&vcpu->wq)) {
- wake_up_interruptible(&vcpu->wq);
+ kvmppc_core_queue_external(vcpu, irq);
+
+ if (waitqueue_active(vcpu->arch.wqp)) {
+ wake_up_interruptible(vcpu->arch.wqp);
vcpu->stat.halt_wakeup++;
} else if (vcpu->cpu != -1) {
smp_send_reschedule(vcpu->cpu);
@@ -571,11 +597,18 @@
r = 0;
vcpu->arch.osi_enabled = true;
break;
+ case KVM_CAP_PPC_PAPR:
+ r = 0;
+ vcpu->arch.papr_enabled = true;
+ break;
default:
r = -EINVAL;
break;
}
+ if (!r)
+ r = kvmppc_sanity_check(vcpu);
+
return r;
}
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index fec1320..d7efdbf 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -16,16 +16,6 @@
#ifdef __HAVE_ARCH_PTE_SPECIAL
-static inline void get_huge_page_tail(struct page *page)
-{
- /*
- * __split_huge_page_refcount() cannot run
- * from under us.
- */
- VM_BUG_ON(atomic_read(&page->_count) < 0);
- atomic_inc(&page->_count);
-}
-
/*
* The performance critical leaf functions are made noinline otherwise gcc
* inlines everything into a single function which results in too much
@@ -57,8 +47,6 @@
put_page(page);
return 0;
}
- if (PageTail(page))
- get_huge_page_tail(page);
pages[*nr] = page;
(*nr)++;
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 0b9a5c1..da5eb38 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -390,7 +390,7 @@
{
unsigned long mask;
unsigned long pte_end;
- struct page *head, *page;
+ struct page *head, *page, *tail;
pte_t pte;
int refs;
@@ -413,6 +413,7 @@
head = pte_page(pte);
page = head + ((addr & (sz-1)) >> PAGE_SHIFT);
+ tail = page;
do {
VM_BUG_ON(compound_head(page) != head);
pages[*nr] = page;
@@ -428,10 +429,20 @@
if (unlikely(pte_val(pte) != pte_val(*ptep))) {
/* Could be optimized better */
- while (*nr) {
- put_page(page);
- (*nr)--;
- }
+ *nr -= refs;
+ while (refs--)
+ put_page(head);
+ return 0;
+ }
+
+ /*
+ * Any tail page need their mapcount reference taken before we
+ * return.
+ */
+ while (refs--) {
+ if (PageTail(tail))
+ get_huge_page_tail(tail);
+ tail++;
}
return 1;
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index e41ebbd..cfe958e 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -66,8 +66,8 @@
bool in_use;
};
-unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+u32 mpc512x_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
switch (bits_per_pixel) {
case 32:
@@ -80,11 +80,12 @@
return 0x00000400;
}
-void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc512x_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
}
-void mpc512x_set_monitor_port(int monitor_port)
+void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port)
{
}
@@ -182,14 +183,10 @@
iounmap(ccm);
}
-ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf)
+enum fsl_diu_monitor_port
+mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return sprintf(buf, "0 - 5121 LCD\n");
-}
-
-int mpc512x_set_sysfs_monitor_port(int val)
-{
- return 0;
+ return FSL_DIU_PORT_DVI;
}
static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
@@ -256,7 +253,7 @@
}
mode = in_be32(&diu_reg->diu_mode);
- if (mode != MFB_MODE1) {
+ if (mode == MFB_MODE0) {
pr_info("%s: DIU OFF\n", __func__);
goto out;
}
@@ -332,8 +329,7 @@
diu_ops.set_gamma_table = mpc512x_set_gamma_table;
diu_ops.set_monitor_port = mpc512x_set_monitor_port;
diu_ops.set_pixel_clock = mpc512x_set_pixel_clock;
- diu_ops.show_monitor_port = mpc512x_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = mpc512x_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = mpc512x_valid_monitor_port;
diu_ops.release_bootmem = mpc512x_release_bootmem;
#endif
}
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 266b3aa..c01c727 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -93,8 +93,8 @@
* The Area Descriptor is a 32-bit value that determine which bits in each
* pixel are to be used for each color.
*/
-static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
switch (bits_per_pixel) {
case 32:
@@ -118,7 +118,8 @@
* On some boards, the gamma table for some ports may need to be modified.
* This is not the case on the P1022DS, so we do nothing.
*/
-static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
+static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
}
@@ -126,7 +127,7 @@
* p1022ds_set_monitor_port: switch the output to a different monitor port
*
*/
-static void p1022ds_set_monitor_port(int monitor_port)
+static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *pixis_node;
void __iomem *pixis;
@@ -145,19 +146,21 @@
}
brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */
- switch (monitor_port) {
- case 0: /* DVI */
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DVI port, disable the DFP and the backlight */
clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
PX_BRDCFG1_DVIEN);
break;
- case 1: /* Single link LVDS */
+ case FSL_DIU_PORT_LVDS:
+ printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DFP port, disable the DVI and the backlight */
clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
PX_BRDCFG1_DFPEN);
break;
default:
- pr_err("p1022ds: unsupported monitor port %i\n", monitor_port);
+ pr_err("p1022ds: unsupported monitor port %i\n", port);
}
iounmap(pixis);
@@ -214,23 +217,18 @@
}
/**
- * p1022ds_show_monitor_port: show the current monitor
- *
- * This function returns a string indicating whether the current monitor is
- * set to DVI or LVDS.
+ * p1022ds_valid_monitor_port: set the monitor port for sysfs
*/
-ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf)
+enum fsl_diu_monitor_port
+p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n",
- monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ');
-}
-
-/**
- * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs
- */
-int p1022ds_set_sysfs_monitor_port(int val)
-{
- return val < 2 ? val : 0;
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ case FSL_DIU_PORT_LVDS:
+ return port;
+ default:
+ return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
+ }
}
#endif
@@ -305,8 +303,7 @@
diu_ops.set_gamma_table = p1022ds_set_gamma_table;
diu_ops.set_monitor_port = p1022ds_set_monitor_port;
diu_ops.set_pixel_clock = p1022ds_set_pixel_clock;
- diu_ops.show_monitor_port = p1022ds_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = p1022ds_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
#endif
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 74e018ef..13fa9a6 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -152,10 +152,10 @@
(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
-unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+u32 mpc8610hpcd_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
- static const unsigned long pixelformat[][3] = {
+ static const u32 pixelformat[][3] = {
{
MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8),
MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0),
@@ -170,7 +170,8 @@
unsigned int arch_monitor;
/* The DVI port is mis-wired on revision 1 of this board. */
- arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
+ arch_monitor =
+ ((*pixis_arch == 0x01) && (port == FSL_DIU_PORT_DVI)) ? 0 : 1;
switch (bits_per_pixel) {
case 32:
@@ -185,10 +186,11 @@
}
}
-void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc8610hpcd_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
int i;
- if (monitor_port == 2) { /* dual link LVDS */
+ if (port == FSL_DIU_PORT_DLVDS) {
for (i = 0; i < 256*3; i++)
gamma_table_base[i] = (gamma_table_base[i] << 2) |
((gamma_table_base[i] >> 6) & 0x03);
@@ -199,17 +201,21 @@
#define PX_BRDCFG0_DLINK (1 << 4)
#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
-void mpc8610hpcd_set_monitor_port(int monitor_port)
+void mpc8610hpcd_set_monitor_port(enum fsl_diu_monitor_port port)
{
- static const u8 bdcfg[] = {
- PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
- PX_BRDCFG0_DLINK,
- 0,
- };
-
- if (monitor_port < 3)
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
- bdcfg[monitor_port]);
+ PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK);
+ break;
+ case FSL_DIU_PORT_LVDS:
+ clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+ PX_BRDCFG0_DLINK);
+ break;
+ case FSL_DIU_PORT_DLVDS:
+ clrbits8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK);
+ break;
+ }
}
/**
@@ -262,20 +268,10 @@
iounmap(guts);
}
-ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf)
+enum fsl_diu_monitor_port
+mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return snprintf(buf, PAGE_SIZE,
- "%c0 - DVI\n"
- "%c1 - Single link LVDS\n"
- "%c2 - Dual link LVDS\n",
- monitor_port == 0 ? '*' : ' ',
- monitor_port == 1 ? '*' : ' ',
- monitor_port == 2 ? '*' : ' ');
-}
-
-int mpc8610hpcd_set_sysfs_monitor_port(int val)
-{
- return val < 3 ? val : 0;
+ return port;
}
#endif
@@ -307,8 +303,7 @@
diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table;
diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port;
diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock;
- diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = mpc8610hpcd_valid_monitor_port;
#endif
pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index c65f75a..22ffccd 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1608,6 +1608,7 @@
return 0;
err:
iounmap(priv->regs_win);
+ release_resource(&port->iores);
err_res:
kfree(priv);
err_priv:
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 2ece02b..c6d0073 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -22,15 +22,24 @@
extern void fsl_rstcr_restart(char *cmd);
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* The different ports that the DIU can be connected to */
+enum fsl_diu_monitor_port {
+ FSL_DIU_PORT_DVI, /* DVI */
+ FSL_DIU_PORT_LVDS, /* Single-link LVDS */
+ FSL_DIU_PORT_DLVDS /* Dual-link LVDS */
+};
+
struct platform_diu_data_ops {
- unsigned int (*get_pixel_format) (unsigned int bits_per_pixel,
- int monitor_port);
- void (*set_gamma_table) (int monitor_port, char *gamma_table_base);
- void (*set_monitor_port) (int monitor_port);
- void (*set_pixel_clock) (unsigned int pixclock);
- ssize_t (*show_monitor_port) (int monitor_port, char *buf);
- int (*set_sysfs_monitor_port) (int val);
- void (*release_bootmem) (void);
+ u32 (*get_pixel_format)(enum fsl_diu_monitor_port port,
+ unsigned int bpp);
+ void (*set_gamma_table)(enum fsl_diu_monitor_port port,
+ char *gamma_table_base);
+ void (*set_monitor_port)(enum fsl_diu_monitor_port port);
+ void (*set_pixel_clock)(unsigned int pixclock);
+ enum fsl_diu_monitor_port (*valid_monitor_port)
+ (enum fsl_diu_monitor_port port);
+ void (*release_bootmem)(void);
};
extern struct platform_diu_data_ops diu_ops;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 6b99fc3..a9fbd43 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -569,6 +569,16 @@
current kernel, and to start another kernel. It is like a reboot
but is independent of hardware/microcode support.
+config CRASH_DUMP
+ bool "kernel crash dumps"
+ depends on 64BIT
+ help
+ Generate crash dump after being started by kexec.
+ Crash dump kernels are loaded in the main kernel with kexec-tools
+ into a specially reserved region and then later executed after
+ a crash by kdump/kexec.
+ For more details see Documentation/kdump/kdump.txt
+
config ZFCPDUMP
def_bool n
prompt "zfcpdump support"
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 028f23e..465eca7 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -61,7 +61,7 @@
extern _sclp_print_early(const char *);
-int puts(const char *s)
+static int puts(const char *s)
{
_sclp_print_early(s);
return 0;
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 29c82c6..6cf8e26 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -68,7 +68,7 @@
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 6fe874f..481f4f7 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -108,9 +108,7 @@
ret->i_gid = hypfs_info->gid;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
if (mode & S_IFDIR)
- ret->i_nlink = 2;
- else
- ret->i_nlink = 1;
+ set_nlink(ret, 2);
}
return ret;
}
@@ -361,7 +359,7 @@
} else if (mode & S_IFDIR) {
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- parent->d_inode->i_nlink++;
+ inc_nlink(parent->d_inode);
} else
BUG();
inode->i_private = data;
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index 623f2fb..9381c92 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -11,6 +11,7 @@
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <asm/fcx.h>
+#include <asm/irq.h>
/* structs from asm/cio.h */
struct irb;
@@ -127,6 +128,7 @@
* @restore: callback for restoring after hibernation
* @uc_handler: callback for unit check handler
* @driver: embedded device driver structure
+ * @int_class: interruption class to use for accounting interrupts
*/
struct ccw_driver {
struct ccw_device_id *ids;
@@ -144,6 +146,7 @@
int (*restore)(struct ccw_device *);
enum uc_todo (*uc_handler) (struct ccw_device *, struct irb *);
struct device_driver driver;
+ enum interruption_class int_class;
};
extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv,
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index da359ca..2e49748b 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -12,6 +12,7 @@
#define PSW32_MASK_IO 0x02000000UL
#define PSW32_MASK_EXT 0x01000000UL
#define PSW32_MASK_KEY 0x00F00000UL
+#define PSW32_MASK_BASE 0x00080000UL /* Always one */
#define PSW32_MASK_MCHECK 0x00040000UL
#define PSW32_MASK_WAIT 0x00020000UL
#define PSW32_MASK_PSTATE 0x00010000UL
@@ -19,21 +20,19 @@
#define PSW32_MASK_CC 0x00003000UL
#define PSW32_MASK_PM 0x00000f00UL
-#define PSW32_ADDR_AMODE31 0x80000000UL
+#define PSW32_MASK_USER 0x00003F00UL
+
+#define PSW32_ADDR_AMODE 0x80000000UL
#define PSW32_ADDR_INSN 0x7FFFFFFFUL
-#define PSW32_BASE_BITS 0x00080000UL
+#define PSW32_DEFAULT_KEY (((u32) PAGE_DEFAULT_ACC) << 20)
#define PSW32_ASC_PRIMARY 0x00000000UL
#define PSW32_ASC_ACCREG 0x00004000UL
#define PSW32_ASC_SECONDARY 0x00008000UL
#define PSW32_ASC_HOME 0x0000C000UL
-#define PSW32_MASK_MERGE(CURRENT,NEW) \
- (((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \
- ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM)))
-
-extern long psw32_user_bits;
+extern u32 psw32_user_bits;
#define COMPAT_USER_HZ 100
#define COMPAT_UTS_MACHINE "s390\0\0\0\0"
@@ -131,7 +130,8 @@
compat_fsid_t f_fsid;
s32 f_namelen;
s32 f_frsize;
- s32 f_spare[6];
+ s32 f_flags;
+ s32 f_spare[5];
};
#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 97cc4403..6940abf 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -168,5 +168,6 @@
extern int diag308(unsigned long subcode, void *addr);
extern void diag308_reset(void);
+extern void store_status(void);
#endif /* _ASM_S390_IPL_H */
diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h
index ba7b01c..ba6d85f 100644
--- a/arch/s390/include/asm/irq.h
+++ b/arch/s390/include/asm/irq.h
@@ -8,7 +8,8 @@
EXTERNAL_INTERRUPT,
IO_INTERRUPT,
EXTINT_CLK,
- EXTINT_IPI,
+ EXTINT_EXC,
+ EXTINT_EMS,
EXTINT_TMR,
EXTINT_TLA,
EXTINT_PFL,
@@ -17,8 +18,8 @@
EXTINT_SCP,
EXTINT_IUC,
EXTINT_CPM,
+ IOINT_CIO,
IOINT_QAI,
- IOINT_QDI,
IOINT_DAS,
IOINT_C15,
IOINT_C70,
@@ -28,6 +29,7 @@
IOINT_CLW,
IOINT_CTC,
IOINT_APB,
+ IOINT_CSC,
NMI_NMI,
NR_IRQS,
};
diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h
index bb729b8..cf4e47b 100644
--- a/arch/s390/include/asm/kexec.h
+++ b/arch/s390/include/asm/kexec.h
@@ -30,9 +30,15 @@
/* Not more than 2GB */
#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
+/* Maximum address we can use for the crash control pages */
+#define KEXEC_CRASH_CONTROL_MEMORY_LIMIT (-1UL)
+
/* Allocate one page for the pdp and the second for the code */
#define KEXEC_CONTROL_PAGE_SIZE 4096
+/* Alignment of crashkernel memory */
+#define KEXEC_CRASH_MEM_ALIGN HPAGE_SIZE
+
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_S390
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 00ff00d..24e1847 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -119,6 +119,7 @@
u32 instruction_lctlg;
u32 exit_program_interruption;
u32 exit_instr_and_program;
+ u32 deliver_external_call;
u32 deliver_emergency_signal;
u32 deliver_service_signal;
u32 deliver_virtio_interrupt;
@@ -138,11 +139,13 @@
u32 instruction_stfl;
u32 instruction_tprot;
u32 instruction_sigp_sense;
+ u32 instruction_sigp_external_call;
u32 instruction_sigp_emergency;
u32 instruction_sigp_stop;
u32 instruction_sigp_arch;
u32 instruction_sigp_prefix;
u32 instruction_sigp_restart;
+ u32 diagnose_10;
u32 diagnose_44;
};
@@ -174,6 +177,10 @@
__u32 address;
};
+struct kvm_s390_extcall_info {
+ __u16 code;
+};
+
struct kvm_s390_emerg_info {
__u16 code;
};
@@ -186,6 +193,7 @@
struct kvm_s390_ext_info ext;
struct kvm_s390_pgm_info pgm;
struct kvm_s390_emerg_info emerg;
+ struct kvm_s390_extcall_info extcall;
struct kvm_s390_prefix_info prefix;
};
};
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index e85c911..9e13c7d 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -151,10 +151,8 @@
*/
__u32 ipib; /* 0x0e00 */
__u32 ipib_checksum; /* 0x0e04 */
-
- /* 64 bit save area */
- __u64 save_area_64; /* 0x0e08 */
- __u8 pad_0x0e10[0x0f00-0x0e10]; /* 0x0e10 */
+ __u32 vmcore_info; /* 0x0e08 */
+ __u8 pad_0x0e0c[0x0f00-0x0e0c]; /* 0x0e0c */
/* Extended facility list */
__u64 stfle_fac_list[32]; /* 0x0f00 */
@@ -290,9 +288,7 @@
*/
__u64 ipib; /* 0x0e00 */
__u32 ipib_checksum; /* 0x0e08 */
-
- /* 64 bit save area */
- __u64 save_area_64; /* 0x0e0c */
+ __u64 vmcore_info; /* 0x0e0c */
__u8 pad_0x0e14[0x0f00-0x0e14]; /* 0x0e14 */
/* Extended facility list */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index accb372..f7ec548 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -177,6 +177,7 @@
struct page;
void arch_free_page(struct page *page, int order);
void arch_alloc_page(struct page *page, int order);
+void arch_set_page_states(int make_stable);
static inline int devmem_is_allowed(unsigned long pfn)
{
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index c0cb794b..34ede0e 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -696,7 +696,9 @@
int gmap_map_segment(struct gmap *gmap, unsigned long from,
unsigned long to, unsigned long length);
int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len);
+unsigned long __gmap_fault(unsigned long address, struct gmap *);
unsigned long gmap_fault(unsigned long address, struct gmap *);
+void gmap_discard(unsigned long from, unsigned long to, struct gmap *);
/*
* Certain architectures need to do special things when PTEs
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index a4b6229..5f33d37 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -33,6 +33,8 @@
extern void s390_adjust_jiffies(void);
extern int get_cpu_capability(unsigned int *);
+extern const struct seq_operations cpuinfo_op;
+extern int sysctl_ieee_emulation_warnings;
/*
* User space process size: 2GB for 31 bit, 4TB or 8PT for 64 bit.
@@ -118,17 +120,17 @@
/*
* Do necessary setup to start up a new thread.
*/
-#define start_thread(regs, new_psw, new_stackp) do { \
- regs->psw.mask = psw_user_bits; \
- regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
- regs->gprs[15] = new_stackp; \
+#define start_thread(regs, new_psw, new_stackp) do { \
+ regs->psw.mask = psw_user_bits | PSW_MASK_EA | PSW_MASK_BA; \
+ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
+ regs->gprs[15] = new_stackp; \
} while (0)
-#define start_thread31(regs, new_psw, new_stackp) do { \
- regs->psw.mask = psw_user32_bits; \
- regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
- regs->gprs[15] = new_stackp; \
- crst_table_downgrade(current->mm, 1UL << 31); \
+#define start_thread31(regs, new_psw, new_stackp) do { \
+ regs->psw.mask = psw_user_bits | PSW_MASK_BA; \
+ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
+ regs->gprs[15] = new_stackp; \
+ crst_table_downgrade(current->mm, 1UL << 31); \
} while (0)
/* Forward declaration, a strange C thing */
@@ -187,7 +189,6 @@
* Set PSW mask to specified value, while leaving the
* PSW addr pointing to the next instruction.
*/
-
static inline void __load_psw_mask (unsigned long mask)
{
unsigned long addr;
@@ -212,26 +213,37 @@
: "=&d" (addr), "=Q" (psw) : "Q" (psw) : "memory", "cc");
#endif /* __s390x__ */
}
-
-/*
- * Function to stop a processor until an interruption occurred
- */
-static inline void enabled_wait(void)
-{
- __load_psw_mask(PSW_BASE_BITS | PSW_MASK_IO | PSW_MASK_EXT |
- PSW_MASK_MCHECK | PSW_MASK_WAIT | PSW_DEFAULT_KEY);
-}
/*
+ * Rewind PSW instruction address by specified number of bytes.
+ */
+static inline unsigned long __rewind_psw(psw_t psw, unsigned long ilc)
+{
+#ifndef __s390x__
+ if (psw.addr & PSW_ADDR_AMODE)
+ /* 31 bit mode */
+ return (psw.addr - ilc) | PSW_ADDR_AMODE;
+ /* 24 bit mode */
+ return (psw.addr - ilc) & ((1UL << 24) - 1);
+#else
+ unsigned long mask;
+
+ mask = (psw.mask & PSW_MASK_EA) ? -1UL :
+ (psw.mask & PSW_MASK_BA) ? (1UL << 31) - 1 :
+ (1UL << 24) - 1;
+ return (psw.addr - ilc) & mask;
+#endif
+}
+
+/*
* Function to drop a processor into disabled wait state
*/
-
static inline void ATTRIB_NORET disabled_wait(unsigned long code)
{
unsigned long ctl_buf;
psw_t dw_psw;
- dw_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT;
+ dw_psw.mask = PSW_MASK_BASE | PSW_MASK_WAIT | PSW_MASK_BA | PSW_MASK_EA;
dw_psw.addr = code;
/*
* Store status and then load disabled wait psw,
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 62fd80c..a658463 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -230,17 +230,21 @@
#define PSW_MASK_IO 0x02000000UL
#define PSW_MASK_EXT 0x01000000UL
#define PSW_MASK_KEY 0x00F00000UL
+#define PSW_MASK_BASE 0x00080000UL /* always one */
#define PSW_MASK_MCHECK 0x00040000UL
#define PSW_MASK_WAIT 0x00020000UL
#define PSW_MASK_PSTATE 0x00010000UL
#define PSW_MASK_ASC 0x0000C000UL
#define PSW_MASK_CC 0x00003000UL
#define PSW_MASK_PM 0x00000F00UL
+#define PSW_MASK_EA 0x00000000UL
+#define PSW_MASK_BA 0x00000000UL
+
+#define PSW_MASK_USER 0x00003F00UL
#define PSW_ADDR_AMODE 0x80000000UL
#define PSW_ADDR_INSN 0x7FFFFFFFUL
-#define PSW_BASE_BITS 0x00080000UL
#define PSW_DEFAULT_KEY (((unsigned long) PAGE_DEFAULT_ACC) << 20)
#define PSW_ASC_PRIMARY 0x00000000UL
@@ -254,6 +258,7 @@
#define PSW_MASK_DAT 0x0400000000000000UL
#define PSW_MASK_IO 0x0200000000000000UL
#define PSW_MASK_EXT 0x0100000000000000UL
+#define PSW_MASK_BASE 0x0000000000000000UL
#define PSW_MASK_KEY 0x00F0000000000000UL
#define PSW_MASK_MCHECK 0x0004000000000000UL
#define PSW_MASK_WAIT 0x0002000000000000UL
@@ -261,12 +266,14 @@
#define PSW_MASK_ASC 0x0000C00000000000UL
#define PSW_MASK_CC 0x0000300000000000UL
#define PSW_MASK_PM 0x00000F0000000000UL
+#define PSW_MASK_EA 0x0000000100000000UL
+#define PSW_MASK_BA 0x0000000080000000UL
+
+#define PSW_MASK_USER 0x00003F0180000000UL
#define PSW_ADDR_AMODE 0x0000000000000000UL
#define PSW_ADDR_INSN 0xFFFFFFFFFFFFFFFFUL
-#define PSW_BASE_BITS 0x0000000180000000UL
-#define PSW_BASE32_BITS 0x0000000080000000UL
#define PSW_DEFAULT_KEY (((unsigned long) PAGE_DEFAULT_ACC) << 52)
#define PSW_ASC_PRIMARY 0x0000000000000000UL
@@ -279,18 +286,7 @@
#ifdef __KERNEL__
extern long psw_kernel_bits;
extern long psw_user_bits;
-#ifdef CONFIG_64BIT
-extern long psw_user32_bits;
#endif
-#endif
-
-/* This macro merges a NEW PSW mask specified by the user into
- the currently active PSW mask CURRENT, modifying only those
- bits in CURRENT that the user may be allowed to change: this
- is the condition code and the program mask bits. */
-#define PSW_MASK_MERGE(CURRENT,NEW) \
- (((CURRENT) & ~(PSW_MASK_CC|PSW_MASK_PM)) | \
- ((NEW) & (PSW_MASK_CC|PSW_MASK_PM)))
/*
* The s390_regs structure is used to define the elf_gregset_t.
@@ -328,8 +324,7 @@
psw_t psw;
unsigned long gprs[NUM_GPRS];
unsigned long orig_gpr2;
- unsigned short ilc;
- unsigned short svcnr;
+ unsigned int svc_code;
};
/*
@@ -487,6 +482,8 @@
#define PTRACE_POKETEXT_AREA 0x5004
#define PTRACE_POKEDATA_AREA 0x5005
#define PTRACE_GET_LAST_BREAK 0x5006
+#define PTRACE_PEEK_SYSTEM_CALL 0x5007
+#define PTRACE_POKE_SYSTEM_CALL 0x5008
/*
* PT_PROT definition is loosely based on hppa bsd definition in
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 2199362..e63d13dd 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -46,6 +46,8 @@
u32 : 16;
} __attribute__ ((packed));
+#define QDR_AC_MULTI_BUFFER_ENABLE 0x01
+
/**
* struct qdr - queue description record (QDR)
* @qfmt: queue format
@@ -256,6 +258,8 @@
u8 val[QDIO_MAX_BUFFERS_PER_Q];
} __attribute__ ((packed, aligned(256)));
+#define CHSC_AC2_MULTI_BUFFER_AVAILABLE 0x0080
+#define CHSC_AC2_MULTI_BUFFER_ENABLED 0x0040
#define CHSC_AC2_DATA_DIV_AVAILABLE 0x0010
#define CHSC_AC2_DATA_DIV_ENABLED 0x0002
@@ -357,6 +361,7 @@
struct qdio_initialize {
struct ccw_device *cdev;
unsigned char q_format;
+ unsigned char qdr_ac;
unsigned char adapter_name[8];
unsigned int qib_param_field_format;
unsigned char *qib_param_field;
diff --git a/arch/s390/include/asm/reset.h b/arch/s390/include/asm/reset.h
index f584f4a..3d6ad4a 100644
--- a/arch/s390/include/asm/reset.h
+++ b/arch/s390/include/asm/reset.h
@@ -17,5 +17,5 @@
extern void register_reset_call(struct reset_call *reset);
extern void unregister_reset_call(struct reset_call *reset);
-extern void s390_reset_system(void);
+extern void s390_reset_system(void (*func)(void *), void *data);
#endif /* _ASM_S390_RESET_H */
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index d5e2ef1..5a09971 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -26,15 +26,21 @@
#define IPL_DEVICE (*(unsigned long *) (0x10404))
#define INITRD_START (*(unsigned long *) (0x1040C))
#define INITRD_SIZE (*(unsigned long *) (0x10414))
+#define OLDMEM_BASE (*(unsigned long *) (0x1041C))
+#define OLDMEM_SIZE (*(unsigned long *) (0x10424))
#else /* __s390x__ */
#define IPL_DEVICE (*(unsigned long *) (0x10400))
#define INITRD_START (*(unsigned long *) (0x10408))
#define INITRD_SIZE (*(unsigned long *) (0x10410))
+#define OLDMEM_BASE (*(unsigned long *) (0x10418))
+#define OLDMEM_SIZE (*(unsigned long *) (0x10420))
#endif /* __s390x__ */
#define COMMAND_LINE ((char *) (0x10480))
#define CHUNK_READ_WRITE 0
#define CHUNK_READ_ONLY 1
+#define CHUNK_OLDMEM 4
+#define CHUNK_CRASHK 5
struct mem_chunk {
unsigned long addr;
@@ -48,6 +54,8 @@
extern unsigned long memory_end;
void detect_memory_layout(struct mem_chunk chunk[]);
+void create_mem_hole(struct mem_chunk memory_chunk[], unsigned long addr,
+ unsigned long size, int type);
#define PRIMARY_SPACE_MODE 0
#define ACCESS_REGISTER_MODE 1
@@ -106,6 +114,7 @@
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
+#define ZFCPDUMP_HSA_SIZE_MAX (64UL<<20)
/*
* Console mode. Override with conmode=
@@ -134,10 +143,14 @@
#define IPL_DEVICE 0x10404
#define INITRD_START 0x1040C
#define INITRD_SIZE 0x10414
+#define OLDMEM_BASE 0x1041C
+#define OLDMEM_SIZE 0x10424
#else /* __s390x__ */
#define IPL_DEVICE 0x10400
#define INITRD_START 0x10408
#define INITRD_SIZE 0x10410
+#define OLDMEM_BASE 0x10418
+#define OLDMEM_SIZE 0x10420
#endif /* __s390x__ */
#define COMMAND_LINE 0x10480
diff --git a/arch/s390/include/asm/sfp-util.h b/arch/s390/include/asm/sfp-util.h
index 0addc64..ca3f881 100644
--- a/arch/s390/include/asm/sfp-util.h
+++ b/arch/s390/include/asm/sfp-util.h
@@ -72,6 +72,6 @@
#define UDIV_NEEDS_NORMALIZATION 0
-#define abort() return 0
+#define abort() BUG()
#define __BYTE_ORDER __BIG_ENDIAN
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 045e009f..ab47a69 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -33,6 +33,7 @@
extern void smp_switch_to_ipl_cpu(void (*func)(void *), void *);
extern void smp_switch_to_cpu(void (*)(void *), void *, unsigned long sp,
int from, int to);
+extern void smp_restart_with_online_cpu(void);
extern void smp_restart_cpu(void);
/*
@@ -64,6 +65,10 @@
func(data);
}
+static inline void smp_restart_with_online_cpu(void)
+{
+}
+
#define smp_vcpu_scheduled (1)
#endif /* CONFIG_SMP */
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index 56612fc..fd94dfe 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -13,6 +13,8 @@
#include <linux/smp.h>
+extern int spin_retry;
+
static inline int
_raw_compare_and_swap(volatile unsigned int *lock,
unsigned int old, unsigned int new)
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index 5c0246b..b239ff5 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -13,6 +13,7 @@
#define _ASM_SYSCALL_H 1
#include <linux/sched.h>
+#include <linux/err.h>
#include <asm/ptrace.h>
/*
@@ -25,7 +26,8 @@
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- return regs->svcnr ? regs->svcnr : -1;
+ return test_tsk_thread_flag(task, TIF_SYSCALL) ?
+ (regs->svc_code & 0xffff) : -1;
}
static inline void syscall_rollback(struct task_struct *task,
@@ -37,7 +39,7 @@
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
- return (regs->gprs[2] >= -4096UL) ? -regs->gprs[2] : 0;
+ return IS_ERR_VALUE(regs->gprs[2]) ? regs->gprs[2] : 0;
}
static inline long syscall_get_return_value(struct task_struct *task,
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 6582f69..ef573c1 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -20,6 +20,8 @@
struct task_struct;
+extern int sysctl_userprocess_debug;
+
extern struct task_struct *__switch_to(void *, void *);
extern void update_per_regs(struct task_struct *task);
@@ -114,6 +116,8 @@
extern void cmma_init(void);
extern int memcpy_real(void *, void *, size_t);
extern void copy_to_absolute_zero(void *dest, void *src, size_t count);
+extern int copy_to_user_real(void __user *dest, void *src, size_t count);
+extern int copy_from_user_real(void *dest, void __user *src, size_t count);
#define finish_arch_switch(prev) do { \
set_fs(current->thread.mm_segment); \
@@ -210,8 +214,10 @@
__load_psw_mask(mask | (arch_local_save_flags() & ~(-1UL >> 8)));
}
-#define local_mcck_enable() __set_psw_mask(psw_kernel_bits)
-#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK)
+#define local_mcck_enable() \
+ __set_psw_mask(psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK)
+#define local_mcck_disable() \
+ __set_psw_mask(psw_kernel_bits | PSW_MASK_DAT)
#ifdef CONFIG_SMP
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 1a5dbb6..a231834 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -48,6 +48,7 @@
unsigned int cpu; /* current CPU */
int preempt_count; /* 0 => preemptable, <0 => BUG */
struct restart_block restart_block;
+ unsigned int system_call;
__u64 user_timer;
__u64 system_timer;
unsigned long last_break; /* last breaking-event-address. */
@@ -84,10 +85,10 @@
/*
* thread information flags bit numbers
*/
+#define TIF_SYSCALL 0 /* inside a system call */
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
-#define TIF_RESTART_SVC 4 /* restart svc with new svc number */
#define TIF_PER_TRAP 6 /* deliver sigtrap on return to user */
#define TIF_MCCK_PENDING 7 /* machine check handling is pending */
#define TIF_SYSCALL_TRACE 8 /* syscall trace active */
@@ -103,11 +104,11 @@
#define TIF_SINGLE_STEP 20 /* This task is single stepped */
#define TIF_FREEZE 21 /* thread is freezing for suspend */
+#define _TIF_SYSCALL (1<<TIF_SYSCALL)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_RESTART_SVC (1<<TIF_RESTART_SVC)
#define _TIF_PER_TRAP (1<<TIF_PER_TRAP)
#define _TIF_MCCK_PENDING (1<<TIF_MCCK_PENDING)
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -117,7 +118,7 @@
#define _TIF_SIE (1<<TIF_SIE)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_31BIT (1<<TIF_31BIT)
-#define _TIF_SINGLE_STEP (1<<TIF_FREEZE)
+#define _TIF_SINGLE_STEP (1<<TIF_SINGLE_STEP)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#ifdef CONFIG_64BIT
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 88829a4..d610bef 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -86,6 +86,17 @@
asm volatile("stcke %0" : "=Q" (*clk) : : "cc");
}
+static inline unsigned long long get_clock_fast(void)
+{
+ unsigned long long clk;
+
+ if (test_facility(25))
+ asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
+ else
+ clk = get_clock();
+ return clk;
+}
+
static inline unsigned long long get_clock_xt(void)
{
unsigned char clk[16];
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index 3044453..1d8648c 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -59,6 +59,7 @@
}
#else
#define __tlb_flush_full(mm) __tlb_flush_local()
+#define __tlb_flush_global() __tlb_flush_local()
#endif
/*
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index df37322..dd4f076 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -48,6 +48,7 @@
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
# Kexec part
S390_KEXEC_OBJS := machine_kexec.o crash.o
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 2b45591..7513187 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -45,8 +45,7 @@
DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
- DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc));
- DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr));
+ DEFINE(__PT_SVC_CODE, offsetof(struct pt_regs, svc_code));
DEFINE(__PT_SIZE, sizeof(struct pt_regs));
BLANK();
DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
@@ -141,7 +140,6 @@
DEFINE(__LC_FPREGS_SAVE_AREA, offsetof(struct _lowcore, floating_pt_save_area));
DEFINE(__LC_GPREGS_SAVE_AREA, offsetof(struct _lowcore, gpregs_save_area));
DEFINE(__LC_CREGS_SAVE_AREA, offsetof(struct _lowcore, cregs_save_area));
- DEFINE(__LC_SAVE_AREA_64, offsetof(struct _lowcore, save_area_64));
#ifdef CONFIG_32BIT
DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, extended_save_area_addr));
#else /* CONFIG_32BIT */
diff --git a/arch/s390/kernel/base.S b/arch/s390/kernel/base.S
index 2554356..f8828d3 100644
--- a/arch/s390/kernel/base.S
+++ b/arch/s390/kernel/base.S
@@ -86,6 +86,8 @@
ENTRY(diag308_reset)
larl %r4,.Lctlregs # Save control registers
stctg %c0,%c15,0(%r4)
+ larl %r4,.Lfpctl # Floating point control register
+ stfpc 0(%r4)
larl %r4,.Lrestart_psw # Setup restart PSW at absolute 0
lghi %r3,0
lg %r4,0(%r4) # Save PSW
@@ -99,6 +101,8 @@
sam64 # Switch to 64 bit addressing mode
larl %r4,.Lctlregs # Restore control registers
lctlg %c0,%c15,0(%r4)
+ larl %r4,.Lfpctl # Restore floating point ctl register
+ lfpc 0(%r4)
br %r14
.align 16
.Lrestart_psw:
@@ -110,6 +114,8 @@
.rept 16
.quad 0
.endr
+.Lfpctl:
+ .long 0
.previous
#else /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 53acaa8..84a9828 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -60,12 +60,9 @@
#include "compat_linux.h"
-long psw_user32_bits = (PSW_BASE32_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
- PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
- PSW_MASK_PSTATE | PSW_DEFAULT_KEY);
-long psw32_user_bits = (PSW32_BASE_BITS | PSW32_MASK_DAT | PSW32_ASC_HOME |
- PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK |
- PSW32_MASK_PSTATE);
+u32 psw32_user_bits = PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT |
+ PSW32_DEFAULT_KEY | PSW32_MASK_BASE | PSW32_MASK_MCHECK |
+ PSW32_MASK_PSTATE | PSW32_ASC_HOME;
/* For this source file, we want overflow handling. */
@@ -365,12 +362,7 @@
if (set) {
if (copy_from_user (&s32, set, sizeof(compat_sigset_t)))
return -EFAULT;
- switch (_NSIG_WORDS) {
- case 4: s.sig[3] = s32.sig[6] | (((long)s32.sig[7]) << 32);
- case 3: s.sig[2] = s32.sig[4] | (((long)s32.sig[5]) << 32);
- case 2: s.sig[1] = s32.sig[2] | (((long)s32.sig[3]) << 32);
- case 1: s.sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
- }
+ s.sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
}
set_fs (KERNEL_DS);
ret = sys_rt_sigprocmask(how,
@@ -380,12 +372,8 @@
set_fs (old_fs);
if (ret) return ret;
if (oset) {
- switch (_NSIG_WORDS) {
- case 4: s32.sig[7] = (s.sig[3] >> 32); s32.sig[6] = s.sig[3];
- case 3: s32.sig[5] = (s.sig[2] >> 32); s32.sig[4] = s.sig[2];
- case 2: s32.sig[3] = (s.sig[1] >> 32); s32.sig[2] = s.sig[1];
- case 1: s32.sig[1] = (s.sig[0] >> 32); s32.sig[0] = s.sig[0];
- }
+ s32.sig[1] = (s.sig[0] >> 32);
+ s32.sig[0] = s.sig[0];
if (copy_to_user (oset, &s32, sizeof(compat_sigset_t)))
return -EFAULT;
}
@@ -404,12 +392,8 @@
ret = sys_rt_sigpending((sigset_t __force __user *) &s, sigsetsize);
set_fs (old_fs);
if (!ret) {
- switch (_NSIG_WORDS) {
- case 4: s32.sig[7] = (s.sig[3] >> 32); s32.sig[6] = s.sig[3];
- case 3: s32.sig[5] = (s.sig[2] >> 32); s32.sig[4] = s.sig[2];
- case 2: s32.sig[3] = (s.sig[1] >> 32); s32.sig[2] = s.sig[1];
- case 1: s32.sig[1] = (s.sig[0] >> 32); s32.sig[0] = s.sig[0];
- }
+ s32.sig[1] = (s.sig[0] >> 32);
+ s32.sig[0] = s.sig[0];
if (copy_to_user (set, &s32, sizeof(compat_sigset_t)))
return -EFAULT;
}
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index a9a285b..4f68c81 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -141,7 +141,8 @@
break;
case __SI_FAULT >> 16:
err |= __get_user(tmp, &from->si_addr);
- to->si_addr = (void __user *)(u64) (tmp & PSW32_ADDR_INSN);
+ to->si_addr = (void __force __user *)
+ (u64) (tmp & PSW32_ADDR_INSN);
break;
case __SI_POLL >> 16:
err |= __get_user(to->si_band, &from->si_band);
@@ -213,16 +214,8 @@
ret = get_user(sa_handler, &act->sa_handler);
ret |= __copy_from_user(&set32, &act->sa_mask,
sizeof(compat_sigset_t));
- switch (_NSIG_WORDS) {
- case 4: new_ka.sa.sa_mask.sig[3] = set32.sig[6]
- | (((long)set32.sig[7]) << 32);
- case 3: new_ka.sa.sa_mask.sig[2] = set32.sig[4]
- | (((long)set32.sig[5]) << 32);
- case 2: new_ka.sa.sa_mask.sig[1] = set32.sig[2]
- | (((long)set32.sig[3]) << 32);
- case 1: new_ka.sa.sa_mask.sig[0] = set32.sig[0]
- | (((long)set32.sig[1]) << 32);
- }
+ new_ka.sa.sa_mask.sig[0] =
+ set32.sig[0] | (((long)set32.sig[1]) << 32);
ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
if (ret)
@@ -233,20 +226,8 @@
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
- switch (_NSIG_WORDS) {
- case 4:
- set32.sig[7] = (old_ka.sa.sa_mask.sig[3] >> 32);
- set32.sig[6] = old_ka.sa.sa_mask.sig[3];
- case 3:
- set32.sig[5] = (old_ka.sa.sa_mask.sig[2] >> 32);
- set32.sig[4] = old_ka.sa.sa_mask.sig[2];
- case 2:
- set32.sig[3] = (old_ka.sa.sa_mask.sig[1] >> 32);
- set32.sig[2] = old_ka.sa.sa_mask.sig[1];
- case 1:
- set32.sig[1] = (old_ka.sa.sa_mask.sig[0] >> 32);
- set32.sig[0] = old_ka.sa.sa_mask.sig[0];
- }
+ set32.sig[1] = (old_ka.sa.sa_mask.sig[0] >> 32);
+ set32.sig[0] = old_ka.sa.sa_mask.sig[0];
ret = put_user((unsigned long)old_ka.sa.sa_handler, &oact->sa_handler);
ret |= __copy_to_user(&oact->sa_mask, &set32,
sizeof(compat_sigset_t));
@@ -300,9 +281,10 @@
_s390_regs_common32 regs32;
int err, i;
- regs32.psw.mask = PSW32_MASK_MERGE(psw32_user_bits,
- (__u32)(regs->psw.mask >> 32));
- regs32.psw.addr = PSW32_ADDR_AMODE31 | (__u32) regs->psw.addr;
+ regs32.psw.mask = psw32_user_bits |
+ ((__u32)(regs->psw.mask >> 32) & PSW32_MASK_USER);
+ regs32.psw.addr = (__u32) regs->psw.addr |
+ (__u32)(regs->psw.mask & PSW_MASK_BA);
for (i = 0; i < NUM_GPRS; i++)
regs32.gprs[i] = (__u32) regs->gprs[i];
save_access_regs(current->thread.acrs);
@@ -327,8 +309,9 @@
err = __copy_from_user(®s32, &sregs->regs, sizeof(regs32));
if (err)
return err;
- regs->psw.mask = PSW_MASK_MERGE(regs->psw.mask,
- (__u64)regs32.psw.mask << 32);
+ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+ (__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 |
+ (__u64)(regs32.psw.addr & PSW32_ADDR_AMODE);
regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN);
for (i = 0; i < NUM_GPRS; i++)
regs->gprs[i] = (__u64) regs32.gprs[i];
@@ -342,7 +325,7 @@
return err;
restore_fp_regs(¤t->thread.fp_regs);
- regs->svcnr = 0; /* disable syscall checks */
+ clear_thread_flag(TIF_SYSCALL); /* No longer in a system call */
return 0;
}
@@ -496,11 +479,11 @@
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
- regs->gprs[14] = (__u64) ka->sa.sa_restorer;
+ regs->gprs[14] = (__u64) ka->sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
- regs->gprs[14] = (__u64) frame->retcode;
+ regs->gprs[14] = (__u64) frame->retcode | PSW32_ADDR_AMODE;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn,
- (u16 __user *)(frame->retcode)))
+ (u16 __force __user *)(frame->retcode)))
goto give_sigsegv;
}
@@ -509,11 +492,12 @@
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->gprs[15] = (__u64) frame;
- regs->psw.addr = (__u64) ka->sa.sa_handler;
+ regs->gprs[15] = (__force __u64) frame;
+ regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */
+ regs->psw.addr = (__force __u64) ka->sa.sa_handler;
regs->gprs[2] = map_signal(sig);
- regs->gprs[3] = (__u64) &frame->sc;
+ regs->gprs[3] = (__force __u64) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
@@ -521,7 +505,7 @@
regs->gprs[5] = current->thread.prot_addr;
/* Place signal number on stack to allow backtrace from handler. */
- if (__put_user(regs->gprs[2], (int __user *) &frame->signo))
+ if (__put_user(regs->gprs[2], (int __force __user *) &frame->signo))
goto give_sigsegv;
return 0;
@@ -564,20 +548,21 @@
} else {
regs->gprs[14] = (__u64) frame->retcode;
err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
- (u16 __user *)(frame->retcode));
+ (u16 __force __user *)(frame->retcode));
}
/* Set up backchain. */
- if (__put_user(regs->gprs[15], (unsigned int __user *) frame))
+ if (__put_user(regs->gprs[15], (unsigned int __force __user *) frame))
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->gprs[15] = (__u64) frame;
+ regs->gprs[15] = (__force __u64) frame;
+ regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */
regs->psw.addr = (__u64) ka->sa.sa_handler;
regs->gprs[2] = map_signal(sig);
- regs->gprs[3] = (__u64) &frame->info;
- regs->gprs[4] = (__u64) &frame->uc;
+ regs->gprs[3] = (__force __u64) &frame->info;
+ regs->gprs[4] = (__force __u64) &frame->uc;
return 0;
give_sigsegv:
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 7526db6..5006a1d 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1623,8 +1623,7 @@
lgfr %r2,%r2 # int
jg sys_syncfs
- .globl sys_setns_wrapper
-sys_setns_wrapper:
+ENTRY(sys_setns_wrapper)
lgfr %r2,%r2 # int
lgfr %r3,%r3 # int
jg sys_setns
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
new file mode 100644
index 0000000..39f8fd4
--- /dev/null
+++ b/arch/s390/kernel/crash_dump.c
@@ -0,0 +1,426 @@
+/*
+ * S390 kdump implementation
+ *
+ * Copyright IBM Corp. 2011
+ * Author(s): Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#include <linux/crash_dump.h>
+#include <asm/lowcore.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/slab.h>
+#include <linux/crash_dump.h>
+#include <linux/bootmem.h>
+#include <linux/elf.h>
+#include <asm/ipl.h>
+
+#define PTR_ADD(x, y) (((char *) (x)) + ((unsigned long) (y)))
+#define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y)))
+#define PTR_DIFF(x, y) ((unsigned long)(((char *) (x)) - ((unsigned long) (y))))
+
+/*
+ * Copy one page from "oldmem"
+ *
+ * For the kdump reserved memory this functions performs a swap operation:
+ * - [OLDMEM_BASE - OLDMEM_BASE + OLDMEM_SIZE] is mapped to [0 - OLDMEM_SIZE].
+ * - [0 - OLDMEM_SIZE] is mapped to [OLDMEM_BASE - OLDMEM_BASE + OLDMEM_SIZE]
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+ size_t csize, unsigned long offset, int userbuf)
+{
+ unsigned long src;
+
+ if (!csize)
+ return 0;
+
+ src = (pfn << PAGE_SHIFT) + offset;
+ if (src < OLDMEM_SIZE)
+ src += OLDMEM_BASE;
+ else if (src > OLDMEM_BASE &&
+ src < OLDMEM_BASE + OLDMEM_SIZE)
+ src -= OLDMEM_BASE;
+ if (userbuf)
+ copy_to_user_real((void __force __user *) buf, (void *) src,
+ csize);
+ else
+ memcpy_real(buf, (void *) src, csize);
+ return csize;
+}
+
+/*
+ * Copy memory from old kernel
+ */
+static int copy_from_oldmem(void *dest, void *src, size_t count)
+{
+ unsigned long copied = 0;
+ int rc;
+
+ if ((unsigned long) src < OLDMEM_SIZE) {
+ copied = min(count, OLDMEM_SIZE - (unsigned long) src);
+ rc = memcpy_real(dest, src + OLDMEM_BASE, copied);
+ if (rc)
+ return rc;
+ }
+ return memcpy_real(dest + copied, src + copied, count - copied);
+}
+
+/*
+ * Alloc memory and panic in case of ENOMEM
+ */
+static void *kzalloc_panic(int len)
+{
+ void *rc;
+
+ rc = kzalloc(len, GFP_KERNEL);
+ if (!rc)
+ panic("s390 kdump kzalloc (%d) failed", len);
+ return rc;
+}
+
+/*
+ * Get memory layout and create hole for oldmem
+ */
+static struct mem_chunk *get_memory_layout(void)
+{
+ struct mem_chunk *chunk_array;
+
+ chunk_array = kzalloc_panic(MEMORY_CHUNKS * sizeof(struct mem_chunk));
+ detect_memory_layout(chunk_array);
+ create_mem_hole(chunk_array, OLDMEM_BASE, OLDMEM_SIZE, CHUNK_CRASHK);
+ return chunk_array;
+}
+
+/*
+ * Initialize ELF note
+ */
+static void *nt_init(void *buf, Elf64_Word type, void *desc, int d_len,
+ const char *name)
+{
+ Elf64_Nhdr *note;
+ u64 len;
+
+ note = (Elf64_Nhdr *)buf;
+ note->n_namesz = strlen(name) + 1;
+ note->n_descsz = d_len;
+ note->n_type = type;
+ len = sizeof(Elf64_Nhdr);
+
+ memcpy(buf + len, name, note->n_namesz);
+ len = roundup(len + note->n_namesz, 4);
+
+ memcpy(buf + len, desc, note->n_descsz);
+ len = roundup(len + note->n_descsz, 4);
+
+ return PTR_ADD(buf, len);
+}
+
+/*
+ * Initialize prstatus note
+ */
+static void *nt_prstatus(void *ptr, struct save_area *sa)
+{
+ struct elf_prstatus nt_prstatus;
+ static int cpu_nr = 1;
+
+ memset(&nt_prstatus, 0, sizeof(nt_prstatus));
+ memcpy(&nt_prstatus.pr_reg.gprs, sa->gp_regs, sizeof(sa->gp_regs));
+ memcpy(&nt_prstatus.pr_reg.psw, sa->psw, sizeof(sa->psw));
+ memcpy(&nt_prstatus.pr_reg.acrs, sa->acc_regs, sizeof(sa->acc_regs));
+ nt_prstatus.pr_pid = cpu_nr;
+ cpu_nr++;
+
+ return nt_init(ptr, NT_PRSTATUS, &nt_prstatus, sizeof(nt_prstatus),
+ "CORE");
+}
+
+/*
+ * Initialize fpregset (floating point) note
+ */
+static void *nt_fpregset(void *ptr, struct save_area *sa)
+{
+ elf_fpregset_t nt_fpregset;
+
+ memset(&nt_fpregset, 0, sizeof(nt_fpregset));
+ memcpy(&nt_fpregset.fpc, &sa->fp_ctrl_reg, sizeof(sa->fp_ctrl_reg));
+ memcpy(&nt_fpregset.fprs, &sa->fp_regs, sizeof(sa->fp_regs));
+
+ return nt_init(ptr, NT_PRFPREG, &nt_fpregset, sizeof(nt_fpregset),
+ "CORE");
+}
+
+/*
+ * Initialize timer note
+ */
+static void *nt_s390_timer(void *ptr, struct save_area *sa)
+{
+ return nt_init(ptr, NT_S390_TIMER, &sa->timer, sizeof(sa->timer),
+ KEXEC_CORE_NOTE_NAME);
+}
+
+/*
+ * Initialize TOD clock comparator note
+ */
+static void *nt_s390_tod_cmp(void *ptr, struct save_area *sa)
+{
+ return nt_init(ptr, NT_S390_TODCMP, &sa->clk_cmp,
+ sizeof(sa->clk_cmp), KEXEC_CORE_NOTE_NAME);
+}
+
+/*
+ * Initialize TOD programmable register note
+ */
+static void *nt_s390_tod_preg(void *ptr, struct save_area *sa)
+{
+ return nt_init(ptr, NT_S390_TODPREG, &sa->tod_reg,
+ sizeof(sa->tod_reg), KEXEC_CORE_NOTE_NAME);
+}
+
+/*
+ * Initialize control register note
+ */
+static void *nt_s390_ctrs(void *ptr, struct save_area *sa)
+{
+ return nt_init(ptr, NT_S390_CTRS, &sa->ctrl_regs,
+ sizeof(sa->ctrl_regs), KEXEC_CORE_NOTE_NAME);
+}
+
+/*
+ * Initialize prefix register note
+ */
+static void *nt_s390_prefix(void *ptr, struct save_area *sa)
+{
+ return nt_init(ptr, NT_S390_PREFIX, &sa->pref_reg,
+ sizeof(sa->pref_reg), KEXEC_CORE_NOTE_NAME);
+}
+
+/*
+ * Fill ELF notes for one CPU with save area registers
+ */
+void *fill_cpu_elf_notes(void *ptr, struct save_area *sa)
+{
+ ptr = nt_prstatus(ptr, sa);
+ ptr = nt_fpregset(ptr, sa);
+ ptr = nt_s390_timer(ptr, sa);
+ ptr = nt_s390_tod_cmp(ptr, sa);
+ ptr = nt_s390_tod_preg(ptr, sa);
+ ptr = nt_s390_ctrs(ptr, sa);
+ ptr = nt_s390_prefix(ptr, sa);
+ return ptr;
+}
+
+/*
+ * Initialize prpsinfo note (new kernel)
+ */
+static void *nt_prpsinfo(void *ptr)
+{
+ struct elf_prpsinfo prpsinfo;
+
+ memset(&prpsinfo, 0, sizeof(prpsinfo));
+ prpsinfo.pr_sname = 'R';
+ strcpy(prpsinfo.pr_fname, "vmlinux");
+ return nt_init(ptr, NT_PRPSINFO, &prpsinfo, sizeof(prpsinfo),
+ KEXEC_CORE_NOTE_NAME);
+}
+
+/*
+ * Initialize vmcoreinfo note (new kernel)
+ */
+static void *nt_vmcoreinfo(void *ptr)
+{
+ char nt_name[11], *vmcoreinfo;
+ Elf64_Nhdr note;
+ void *addr;
+
+ if (copy_from_oldmem(&addr, &S390_lowcore.vmcore_info, sizeof(addr)))
+ return ptr;
+ memset(nt_name, 0, sizeof(nt_name));
+ if (copy_from_oldmem(¬e, addr, sizeof(note)))
+ return ptr;
+ if (copy_from_oldmem(nt_name, addr + sizeof(note), sizeof(nt_name) - 1))
+ return ptr;
+ if (strcmp(nt_name, "VMCOREINFO") != 0)
+ return ptr;
+ vmcoreinfo = kzalloc_panic(note.n_descsz + 1);
+ if (copy_from_oldmem(vmcoreinfo, addr + 24, note.n_descsz))
+ return ptr;
+ vmcoreinfo[note.n_descsz + 1] = 0;
+ return nt_init(ptr, 0, vmcoreinfo, note.n_descsz, "VMCOREINFO");
+}
+
+/*
+ * Initialize ELF header (new kernel)
+ */
+static void *ehdr_init(Elf64_Ehdr *ehdr, int mem_chunk_cnt)
+{
+ memset(ehdr, 0, sizeof(*ehdr));
+ memcpy(ehdr->e_ident, ELFMAG, SELFMAG);
+ ehdr->e_ident[EI_CLASS] = ELFCLASS64;
+ ehdr->e_ident[EI_DATA] = ELFDATA2MSB;
+ ehdr->e_ident[EI_VERSION] = EV_CURRENT;
+ memset(ehdr->e_ident + EI_PAD, 0, EI_NIDENT - EI_PAD);
+ ehdr->e_type = ET_CORE;
+ ehdr->e_machine = EM_S390;
+ ehdr->e_version = EV_CURRENT;
+ ehdr->e_phoff = sizeof(Elf64_Ehdr);
+ ehdr->e_ehsize = sizeof(Elf64_Ehdr);
+ ehdr->e_phentsize = sizeof(Elf64_Phdr);
+ ehdr->e_phnum = mem_chunk_cnt + 1;
+ return ehdr + 1;
+}
+
+/*
+ * Return CPU count for ELF header (new kernel)
+ */
+static int get_cpu_cnt(void)
+{
+ int i, cpus = 0;
+
+ for (i = 0; zfcpdump_save_areas[i]; i++) {
+ if (zfcpdump_save_areas[i]->pref_reg == 0)
+ continue;
+ cpus++;
+ }
+ return cpus;
+}
+
+/*
+ * Return memory chunk count for ELF header (new kernel)
+ */
+static int get_mem_chunk_cnt(void)
+{
+ struct mem_chunk *chunk_array, *mem_chunk;
+ int i, cnt = 0;
+
+ chunk_array = get_memory_layout();
+ for (i = 0; i < MEMORY_CHUNKS; i++) {
+ mem_chunk = &chunk_array[i];
+ if (chunk_array[i].type != CHUNK_READ_WRITE &&
+ chunk_array[i].type != CHUNK_READ_ONLY)
+ continue;
+ if (mem_chunk->size == 0)
+ continue;
+ cnt++;
+ }
+ kfree(chunk_array);
+ return cnt;
+}
+
+/*
+ * Relocate pointer in order to allow vmcore code access the data
+ */
+static inline unsigned long relocate(unsigned long addr)
+{
+ return OLDMEM_BASE + addr;
+}
+
+/*
+ * Initialize ELF loads (new kernel)
+ */
+static int loads_init(Elf64_Phdr *phdr, u64 loads_offset)
+{
+ struct mem_chunk *chunk_array, *mem_chunk;
+ int i;
+
+ chunk_array = get_memory_layout();
+ for (i = 0; i < MEMORY_CHUNKS; i++) {
+ mem_chunk = &chunk_array[i];
+ if (mem_chunk->size == 0)
+ break;
+ if (chunk_array[i].type != CHUNK_READ_WRITE &&
+ chunk_array[i].type != CHUNK_READ_ONLY)
+ continue;
+ else
+ phdr->p_filesz = mem_chunk->size;
+ phdr->p_type = PT_LOAD;
+ phdr->p_offset = mem_chunk->addr;
+ phdr->p_vaddr = mem_chunk->addr;
+ phdr->p_paddr = mem_chunk->addr;
+ phdr->p_memsz = mem_chunk->size;
+ phdr->p_flags = PF_R | PF_W | PF_X;
+ phdr->p_align = PAGE_SIZE;
+ phdr++;
+ }
+ kfree(chunk_array);
+ return i;
+}
+
+/*
+ * Initialize notes (new kernel)
+ */
+static void *notes_init(Elf64_Phdr *phdr, void *ptr, u64 notes_offset)
+{
+ struct save_area *sa;
+ void *ptr_start = ptr;
+ int i;
+
+ ptr = nt_prpsinfo(ptr);
+
+ for (i = 0; zfcpdump_save_areas[i]; i++) {
+ sa = zfcpdump_save_areas[i];
+ if (sa->pref_reg == 0)
+ continue;
+ ptr = fill_cpu_elf_notes(ptr, sa);
+ }
+ ptr = nt_vmcoreinfo(ptr);
+ memset(phdr, 0, sizeof(*phdr));
+ phdr->p_type = PT_NOTE;
+ phdr->p_offset = relocate(notes_offset);
+ phdr->p_filesz = (unsigned long) PTR_SUB(ptr, ptr_start);
+ phdr->p_memsz = phdr->p_filesz;
+ return ptr;
+}
+
+/*
+ * Create ELF core header (new kernel)
+ */
+static void s390_elf_corehdr_create(char **elfcorebuf, size_t *elfcorebuf_sz)
+{
+ Elf64_Phdr *phdr_notes, *phdr_loads;
+ int mem_chunk_cnt;
+ void *ptr, *hdr;
+ u32 alloc_size;
+ u64 hdr_off;
+
+ mem_chunk_cnt = get_mem_chunk_cnt();
+
+ alloc_size = 0x1000 + get_cpu_cnt() * 0x300 +
+ mem_chunk_cnt * sizeof(Elf64_Phdr);
+ hdr = kzalloc_panic(alloc_size);
+ /* Init elf header */
+ ptr = ehdr_init(hdr, mem_chunk_cnt);
+ /* Init program headers */
+ phdr_notes = ptr;
+ ptr = PTR_ADD(ptr, sizeof(Elf64_Phdr));
+ phdr_loads = ptr;
+ ptr = PTR_ADD(ptr, sizeof(Elf64_Phdr) * mem_chunk_cnt);
+ /* Init notes */
+ hdr_off = PTR_DIFF(ptr, hdr);
+ ptr = notes_init(phdr_notes, ptr, ((unsigned long) hdr) + hdr_off);
+ /* Init loads */
+ hdr_off = PTR_DIFF(ptr, hdr);
+ loads_init(phdr_loads, ((unsigned long) hdr) + hdr_off);
+ *elfcorebuf_sz = hdr_off;
+ *elfcorebuf = (void *) relocate((unsigned long) hdr);
+ BUG_ON(*elfcorebuf_sz > alloc_size);
+}
+
+/*
+ * Create kdump ELF core header in new kernel, if it has not been passed via
+ * the "elfcorehdr" kernel parameter
+ */
+static int setup_kdump_elfcorehdr(void)
+{
+ size_t elfcorebuf_sz;
+ char *elfcorebuf;
+
+ if (!OLDMEM_BASE || is_kdump_kernel())
+ return -EINVAL;
+ s390_elf_corehdr_create(&elfcorebuf, &elfcorebuf_sz);
+ elfcorehdr_addr = (unsigned long long) elfcorebuf;
+ elfcorehdr_size = elfcorebuf_sz;
+ return 0;
+}
+
+subsys_initcall(setup_kdump_elfcorehdr);
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index f297456..37394b3 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -252,7 +252,7 @@
{
psw_t psw;
- psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+ psw.mask = PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA;
psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_ext_handler;
S390_lowcore.external_new_psw = psw;
psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 02ec8fe..b131570 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -43,16 +43,15 @@
SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
-SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
+SP_SVC_CODE = STACK_FRAME_OVERHEAD + __PT_SVC_CODE
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
- _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_PER_TRAP )
+ _TIF_MCCK_PENDING | _TIF_PER_TRAP )
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING)
-_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
- _TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8)
+_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
+ _TIF_SYSCALL_TRACEPOINT)
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
@@ -228,9 +227,10 @@
sysc_saveall:
SAVE_ALL_SVC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SAVE_AREA
- mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW
- mvc SP_ILC(4,%r15),__LC_SVC_ILC
l %r12,__LC_THREAD_INFO # load pointer to thread_info struct
+ mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW
+ mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC
+ oi __TI_flags+3(%r12),_TIF_SYSCALL
sysc_vtime:
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
sysc_stime:
@@ -239,17 +239,17 @@
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
sysc_do_svc:
xr %r7,%r7
- icm %r7,3,SP_SVCNR(%r15) # load svc number and test for svc 0
+ icm %r7,3,SP_SVC_CODE+2(%r15)# load svc number and test for svc 0
bnz BASED(sysc_nr_ok) # svc number > 0
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
bnl BASED(sysc_nr_ok)
- sth %r1,SP_SVCNR(%r15)
+ sth %r1,SP_SVC_CODE+2(%r15)
lr %r7,%r1 # copy svc number to %r7
sysc_nr_ok:
sll %r7,2 # svc number *4
l %r10,BASED(.Lsysc_table)
- tm __TI_flags+2(%r12),_TIF_SYSCALL
+ tm __TI_flags+2(%r12),_TIF_TRACE >> 8
mvc SP_ARGS(4,%r15),SP_R7(%r15)
l %r8,0(%r7,%r10) # get system call addr.
bnz BASED(sysc_tracesys)
@@ -259,23 +259,19 @@
sysc_return:
LOCKDEP_SYS_EXIT
sysc_tif:
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+ bno BASED(sysc_restore)
tm __TI_flags+3(%r12),_TIF_WORK_SVC
bnz BASED(sysc_work) # there is work to do (signals etc.)
+ ni __TI_flags+3(%r12),255-_TIF_SYSCALL
sysc_restore:
RESTORE_ALL __LC_RETURN_PSW,1
sysc_done:
#
-# There is work to do, but first we need to check if we return to userspace.
-#
-sysc_work:
- tm SP_PSW+1(%r15),0x01 # returning to user ?
- bno BASED(sysc_restore)
-
-#
# One of the work bits is on. Find out which one.
#
-sysc_work_tif:
+sysc_work:
tm __TI_flags+3(%r12),_TIF_MCCK_PENDING
bo BASED(sysc_mcck_pending)
tm __TI_flags+3(%r12),_TIF_NEED_RESCHED
@@ -284,8 +280,6 @@
bo BASED(sysc_sigpending)
tm __TI_flags+3(%r12),_TIF_NOTIFY_RESUME
bo BASED(sysc_notify_resume)
- tm __TI_flags+3(%r12),_TIF_RESTART_SVC
- bo BASED(sysc_restart)
tm __TI_flags+3(%r12),_TIF_PER_TRAP
bo BASED(sysc_singlestep)
b BASED(sysc_return) # beware of critical section cleanup
@@ -314,11 +308,14 @@
la %r2,SP_PTREGS(%r15) # load pt_regs
l %r1,BASED(.Ldo_signal)
basr %r14,%r1 # call do_signal
- tm __TI_flags+3(%r12),_TIF_RESTART_SVC
- bo BASED(sysc_restart)
- tm __TI_flags+3(%r12),_TIF_PER_TRAP
- bo BASED(sysc_singlestep)
- b BASED(sysc_return)
+ tm __TI_flags+3(%r12),_TIF_SYSCALL
+ bno BASED(sysc_return)
+ lm %r2,%r6,SP_R2(%r15) # load svc arguments
+ xr %r7,%r7 # svc 0 returns -ENOSYS
+ clc SP_SVC_CODE+2(2,%r15),BASED(.Lnr_syscalls+2)
+ bnl BASED(sysc_nr_ok) # invalid svc number -> do svc 0
+ icm %r7,3,SP_SVC_CODE+2(%r15)# load new svc number
+ b BASED(sysc_nr_ok) # restart svc
#
# _TIF_NOTIFY_RESUME is set, call do_notify_resume
@@ -329,24 +326,11 @@
la %r14,BASED(sysc_return)
br %r1 # call do_notify_resume
-
-#
-# _TIF_RESTART_SVC is set, set up registers and restart svc
-#
-sysc_restart:
- ni __TI_flags+3(%r12),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
- l %r7,SP_R2(%r15) # load new svc number
- mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
- lm %r2,%r6,SP_R2(%r15) # load svc arguments
- sth %r7,SP_SVCNR(%r15)
- b BASED(sysc_nr_ok) # restart svc
-
#
# _TIF_PER_TRAP is set, call do_per_trap
#
sysc_singlestep:
- ni __TI_flags+3(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP
- xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
+ ni __TI_flags+3(%r12),255-(_TIF_SYSCALL | _TIF_PER_TRAP)
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_return) # load adr. of system return
@@ -361,7 +345,7 @@
la %r2,SP_PTREGS(%r15) # load pt_regs
la %r3,0
xr %r0,%r0
- icm %r0,3,SP_SVCNR(%r15)
+ icm %r0,3,SP_SVC_CODE(%r15)
st %r0,SP_R2(%r15)
basr %r14,%r1
cl %r2,BASED(.Lnr_syscalls)
@@ -376,7 +360,7 @@
basr %r14,%r8 # call sys_xxx
st %r2,SP_R2(%r15) # store return value
sysc_tracenogo:
- tm __TI_flags+2(%r12),_TIF_SYSCALL
+ tm __TI_flags+2(%r12),_TIF_TRACE >> 8
bz BASED(sysc_return)
l %r1,BASED(.Ltrace_exit)
la %r2,SP_PTREGS(%r15) # load pt_regs
@@ -454,7 +438,6 @@
bnz BASED(pgm_per) # got per exception -> special case
SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SAVE_AREA
- xc SP_ILC(4,%r15),SP_ILC(%r15)
mvc SP_PSW(8,%r15),__LC_PGM_OLD_PSW
l %r12,__LC_THREAD_INFO # load pointer to thread_info struct
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
@@ -530,9 +513,10 @@
pgm_svcper:
SAVE_ALL_PGM __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SAVE_AREA
- mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW
- mvc SP_ILC(4,%r15),__LC_SVC_ILC
l %r12,__LC_THREAD_INFO # load pointer to thread_info struct
+ mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW
+ mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC
+ oi __TI_flags+3(%r12),(_TIF_SYSCALL | _TIF_PER_TRAP)
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
@@ -540,7 +524,6 @@
mvc __THREAD_per_cause(2,%r8),__LC_PER_CAUSE
mvc __THREAD_per_address(4,%r8),__LC_PER_ADDRESS
mvc __THREAD_per_paid(1,%r8),__LC_PER_PAID
- oi __TI_flags+3(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
lm %r2,%r6,SP_R2(%r15) # load svc arguments
b BASED(sysc_do_svc)
@@ -550,7 +533,6 @@
#
kernel_per:
REENABLE_IRQS
- xc SP_SVCNR(2,%r15),SP_SVCNR(%r15)
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
basr %r14,%r1 # branch to do_single_step
@@ -853,13 +835,13 @@
# PSW restart interrupt handler
#
ENTRY(psw_restart_int_handler)
- st %r15,__LC_SAVE_AREA_64(%r0) # save r15
+ st %r15,__LC_SAVE_AREA+48(%r0) # save r15
basr %r15,0
0: l %r15,.Lrestart_stack-0b(%r15) # load restart stack
l %r15,0(%r15)
ahi %r15,-SP_SIZE # make room for pt_regs
stm %r0,%r14,SP_R0(%r15) # store gprs %r0-%r14 to stack
- mvc SP_R15(4,%r15),__LC_SAVE_AREA_64(%r0)# store saved %r15 to stack
+ mvc SP_R15(4,%r15),__LC_SAVE_AREA+48(%r0)# store saved %r15 to stack
mvc SP_PSW(8,%r15),__LC_RST_OLD_PSW(%r0) # store restart old psw
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # set backchain to 0
basr %r14,0
@@ -965,9 +947,11 @@
s %r15,BASED(.Lc_spsize) # make room for registers & psw
st %r15,12(%r12)
CREATE_STACK_FRAME __LC_SAVE_AREA
- mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW
- mvc SP_ILC(4,%r15),__LC_SVC_ILC
mvc 0(4,%r12),__LC_THREAD_INFO
+ l %r12,__LC_THREAD_INFO
+ mvc SP_PSW(8,%r15),__LC_SVC_OLD_PSW
+ mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC
+ oi __TI_flags+3(%r12),_TIF_SYSCALL
cleanup_vtime:
clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+12)
bhe BASED(cleanup_stime)
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index 66729eb..ef8fb1d 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -5,24 +5,33 @@
#include <linux/signal.h>
#include <asm/ptrace.h>
+
+extern void (*pgm_check_table[128])(struct pt_regs *, long, unsigned long);
+extern void *restart_stack;
+
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_exit(struct pt_regs *regs);
+
void do_protection_exception(struct pt_regs *, long, unsigned long);
void do_dat_exception(struct pt_regs *, long, unsigned long);
void do_asce_exception(struct pt_regs *, long, unsigned long);
-extern int sysctl_userprocess_debug;
-
void do_per_trap(struct pt_regs *regs);
void syscall_trace(struct pt_regs *regs, int entryexit);
void kernel_stack_overflow(struct pt_regs * regs);
void do_signal(struct pt_regs *regs);
int handle_signal32(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs *regs);
+void do_notify_resume(struct pt_regs *regs);
void do_extint(struct pt_regs *regs, unsigned int, unsigned int, unsigned long);
+void do_restart(void);
int __cpuinit start_secondary(void *cpuvoid);
void __init startup_init(void);
void die(const char * str, struct pt_regs * regs, long err);
+void __init time_init(void);
+
struct s390_mmap_arg_struct;
struct fadvise64_64_args;
struct old_sigaction;
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 713da076..83a9374 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -43,19 +43,18 @@
SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
-SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
+SP_SVC_CODE = STACK_FRAME_OVERHEAD + __PT_SVC_CODE
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
- _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_PER_TRAP )
+ _TIF_MCCK_PENDING | _TIF_PER_TRAP )
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING)
-_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
- _TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8)
+_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
+ _TIF_SYSCALL_TRACEPOINT)
_TIF_EXIT_SIE = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING)
#define BASED(name) name-system_call(%r13)
@@ -249,9 +248,10 @@
sysc_saveall:
SAVE_ALL_SVC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SAVE_AREA
- mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW
- mvc SP_ILC(4,%r15),__LC_SVC_ILC
lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct
+ mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW
+ mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC
+ oi __TI_flags+7(%r12),_TIF_SYSCALL
sysc_vtime:
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
sysc_stime:
@@ -260,14 +260,14 @@
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
LAST_BREAK
sysc_do_svc:
- llgh %r7,SP_SVCNR(%r15)
+ llgh %r7,SP_SVC_CODE+2(%r15)
slag %r7,%r7,2 # shift and test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
llgfr %r1,%r1 # clear high word in r1
cghi %r1,NR_syscalls
jnl sysc_nr_ok
- sth %r1,SP_SVCNR(%r15)
+ sth %r1,SP_SVC_CODE+2(%r15)
slag %r7,%r1,2 # shift and test for svc 0
sysc_nr_ok:
larl %r10,sys_call_table
@@ -277,7 +277,7 @@
larl %r10,sys_call_table_emu # use 31 bit emulation system calls
sysc_noemu:
#endif
- tm __TI_flags+6(%r12),_TIF_SYSCALL
+ tm __TI_flags+6(%r12),_TIF_TRACE >> 8
mvc SP_ARGS(8,%r15),SP_R7(%r15)
lgf %r8,0(%r7,%r10) # load address of system call routine
jnz sysc_tracesys
@@ -287,23 +287,19 @@
sysc_return:
LOCKDEP_SYS_EXIT
sysc_tif:
+ tm SP_PSW+1(%r15),0x01 # returning to user ?
+ jno sysc_restore
tm __TI_flags+7(%r12),_TIF_WORK_SVC
jnz sysc_work # there is work to do (signals etc.)
+ ni __TI_flags+7(%r12),255-_TIF_SYSCALL
sysc_restore:
RESTORE_ALL __LC_RETURN_PSW,1
sysc_done:
#
-# There is work to do, but first we need to check if we return to userspace.
-#
-sysc_work:
- tm SP_PSW+1(%r15),0x01 # returning to user ?
- jno sysc_restore
-
-#
# One of the work bits is on. Find out which one.
#
-sysc_work_tif:
+sysc_work:
tm __TI_flags+7(%r12),_TIF_MCCK_PENDING
jo sysc_mcck_pending
tm __TI_flags+7(%r12),_TIF_NEED_RESCHED
@@ -312,8 +308,6 @@
jo sysc_sigpending
tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME
jo sysc_notify_resume
- tm __TI_flags+7(%r12),_TIF_RESTART_SVC
- jo sysc_restart
tm __TI_flags+7(%r12),_TIF_PER_TRAP
jo sysc_singlestep
j sysc_return # beware of critical section cleanup
@@ -339,11 +333,15 @@
ni __TI_flags+7(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP
la %r2,SP_PTREGS(%r15) # load pt_regs
brasl %r14,do_signal # call do_signal
- tm __TI_flags+7(%r12),_TIF_RESTART_SVC
- jo sysc_restart
- tm __TI_flags+7(%r12),_TIF_PER_TRAP
- jo sysc_singlestep
- j sysc_return
+ tm __TI_flags+7(%r12),_TIF_SYSCALL
+ jno sysc_return
+ lmg %r2,%r6,SP_R2(%r15) # load svc arguments
+ lghi %r7,0 # svc 0 returns -ENOSYS
+ lh %r1,SP_SVC_CODE+2(%r15) # load new svc number
+ cghi %r1,NR_syscalls
+ jnl sysc_nr_ok # invalid svc number -> do svc 0
+ slag %r7,%r1,2
+ j sysc_nr_ok # restart svc
#
# _TIF_NOTIFY_RESUME is set, call do_notify_resume
@@ -354,23 +352,10 @@
jg do_notify_resume # call do_notify_resume
#
-# _TIF_RESTART_SVC is set, set up registers and restart svc
-#
-sysc_restart:
- ni __TI_flags+7(%r12),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
- lg %r7,SP_R2(%r15) # load new svc number
- mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
- lmg %r2,%r6,SP_R2(%r15) # load svc arguments
- sth %r7,SP_SVCNR(%r15)
- slag %r7,%r7,2
- j sysc_nr_ok # restart svc
-
-#
# _TIF_PER_TRAP is set, call do_per_trap
#
sysc_singlestep:
- ni __TI_flags+7(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP
- xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
+ ni __TI_flags+7(%r12),255-(_TIF_SYSCALL | _TIF_PER_TRAP)
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_per_trap
@@ -382,7 +367,7 @@
sysc_tracesys:
la %r2,SP_PTREGS(%r15) # load pt_regs
la %r3,0
- llgh %r0,SP_SVCNR(%r15)
+ llgh %r0,SP_SVC_CODE+2(%r15)
stg %r0,SP_R2(%r15)
brasl %r14,do_syscall_trace_enter
lghi %r0,NR_syscalls
@@ -397,7 +382,7 @@
basr %r14,%r8 # call sys_xxx
stg %r2,SP_R2(%r15) # store return value
sysc_tracenogo:
- tm __TI_flags+6(%r12),_TIF_SYSCALL
+ tm __TI_flags+6(%r12),_TIF_TRACE >> 8
jz sysc_return
la %r2,SP_PTREGS(%r15) # load pt_regs
larl %r14,sysc_return # return point is sysc_return
@@ -470,7 +455,6 @@
jnz pgm_per # got per exception -> special case
SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SAVE_AREA
- xc SP_ILC(4,%r15),SP_ILC(%r15)
mvc SP_PSW(16,%r15),__LC_PGM_OLD_PSW
lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct
HANDLE_SIE_INTERCEPT
@@ -550,9 +534,10 @@
pgm_svcper:
SAVE_ALL_PGM __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SAVE_AREA
- mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW
- mvc SP_ILC(4,%r15),__LC_SVC_ILC
lg %r12,__LC_THREAD_INFO # load pointer to thread_info struct
+ mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW
+ mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC
+ oi __TI_flags+7(%r12),(_TIF_SYSCALL | _TIF_PER_TRAP)
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
@@ -561,7 +546,6 @@
mvc __THREAD_per_cause(2,%r8),__LC_PER_CAUSE
mvc __THREAD_per_address(8,%r8),__LC_PER_ADDRESS
mvc __THREAD_per_paid(1,%r8),__LC_PER_PAID
- oi __TI_flags+7(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_svc
@@ -571,7 +555,6 @@
#
kernel_per:
REENABLE_IRQS
- xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
brasl %r14,do_per_trap
j pgm_exit
@@ -869,12 +852,12 @@
# PSW restart interrupt handler
#
ENTRY(psw_restart_int_handler)
- stg %r15,__LC_SAVE_AREA_64(%r0) # save r15
+ stg %r15,__LC_SAVE_AREA+120(%r0) # save r15
larl %r15,restart_stack # load restart stack
lg %r15,0(%r15)
aghi %r15,-SP_SIZE # make room for pt_regs
stmg %r0,%r14,SP_R0(%r15) # store gprs %r0-%r14 to stack
- mvc SP_R15(8,%r15),__LC_SAVE_AREA_64(%r0)# store saved %r15 to stack
+ mvc SP_R15(8,%r15),__LC_SAVE_AREA+120(%r0)# store saved %r15 to stack
mvc SP_PSW(16,%r15),__LC_RST_OLD_PSW(%r0)# store restart old psw
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # set backchain to 0
brasl %r14,do_restart
@@ -972,9 +955,11 @@
stg %r15,32(%r12)
stg %r11,0(%r12)
CREATE_STACK_FRAME __LC_SAVE_AREA
- mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW
- mvc SP_ILC(4,%r15),__LC_SVC_ILC
mvc 8(8,%r12),__LC_THREAD_INFO
+ lg %r12,__LC_THREAD_INFO
+ mvc SP_PSW(16,%r15),__LC_SVC_OLD_PSW
+ mvc SP_SVC_CODE(4,%r15),__LC_SVC_ILC
+ oi __TI_flags+7(%r12),_TIF_SYSCALL
cleanup_vtime:
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+24)
jhe cleanup_stime
@@ -1096,6 +1081,7 @@
lghi %r2,0
br %r14
sie_fault:
+ lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
lg %r14,__LC_THREAD_INFO # pointer thread_info struct
ni __TI_flags+6(%r14),255-(_TIF_SIE>>8)
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 2d781ba..900068d 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -449,10 +449,28 @@
#
.org 0x10000
ENTRY(startup)
+ j .Lep_startup_normal
+ .org 0x10008
+#
+# This is a list of s390 kernel entry points. At address 0x1000f the number of
+# valid entry points is stored.
+#
+# IMPORTANT: Do not change this table, it is s390 kernel ABI!
+#
+ .ascii "S390EP"
+ .byte 0x00,0x01
+#
+# kdump startup-code at 0x10010, running in 64 bit absolute addressing mode
+#
+ .org 0x10010
+ENTRY(startup_kdump)
+ j .Lep_startup_kdump
+.Lep_startup_normal:
basr %r13,0 # get base
.LPG0:
xc 0x200(256),0x200 # partially clear lowcore
xc 0x300(256),0x300
+ xc 0xe00(256),0xe00
stck __LC_LAST_UPDATE_CLOCK
spt 5f-.LPG0(%r13)
mvc __LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13)
@@ -534,6 +552,8 @@
.align 8
5: .long 0x7fffffff,0xffffffff
+#include "head_kdump.S"
+
#
# params at 10400 (setup.h)
#
@@ -541,6 +561,8 @@
.long 0,0 # IPL_DEVICE
.long 0,0 # INITRD_START
.long 0,0 # INITRD_SIZE
+ .long 0,0 # OLDMEM_BASE
+ .long 0,0 # OLDMEM_SIZE
.org COMMAND_LINE
.byte "root=/dev/ram0 ro"
diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index f21954b..d3f1ab7 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -92,7 +92,7 @@
.LPG3:
# check control registers
stctl %c0,%c15,0(%r15)
- oi 2(%r15),0x40 # enable sigp emergency signal
+ oi 2(%r15),0x60 # enable sigp emergency & external call
oi 0(%r15),0x10 # switch on low address protection
lctl %c0,%c15,0(%r15)
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index ae5d492..99348c0 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -90,7 +90,7 @@
.LPG3:
# check control registers
stctg %c0,%c15,0(%r15)
- oi 6(%r15),0x40 # enable sigp emergency signal
+ oi 6(%r15),0x60 # enable sigp emergency & external call
oi 4(%r15),0x10 # switch on low address proctection
lctlg %c0,%c15,0(%r15)
diff --git a/arch/s390/kernel/head_kdump.S b/arch/s390/kernel/head_kdump.S
new file mode 100644
index 0000000..e1ac389
--- /dev/null
+++ b/arch/s390/kernel/head_kdump.S
@@ -0,0 +1,119 @@
+/*
+ * S390 kdump lowlevel functions (new kernel)
+ *
+ * Copyright IBM Corp. 2011
+ * Author(s): Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#define DATAMOVER_ADDR 0x4000
+#define COPY_PAGE_ADDR 0x6000
+
+#ifdef CONFIG_CRASH_DUMP
+
+#
+# kdump entry (new kernel - not yet relocated)
+#
+# Note: This code has to be position independent
+#
+
+.align 2
+.Lep_startup_kdump:
+ lhi %r1,2 # mode 2 = esame (dump)
+ sigp %r1,%r0,0x12 # Switch to esame mode
+ sam64 # Switch to 64 bit addressing
+ basr %r13,0
+.Lbase:
+ larl %r2,.Lbase_addr # Check, if we have been
+ lg %r2,0(%r2) # already relocated:
+ clgr %r2,%r13 #
+ jne .Lrelocate # No : Start data mover
+ lghi %r2,0 # Yes: Start kdump kernel
+ brasl %r14,startup_kdump_relocated
+
+.Lrelocate:
+ larl %r4,startup
+ lg %r2,0x418(%r4) # Get kdump base
+ lg %r3,0x420(%r4) # Get kdump size
+
+ larl %r10,.Lcopy_start # Source of data mover
+ lghi %r8,DATAMOVER_ADDR # Target of data mover
+ mvc 0(256,%r8),0(%r10) # Copy data mover code
+
+ agr %r8,%r2 # Copy data mover to
+ mvc 0(256,%r8),0(%r10) # reserved mem
+
+ lghi %r14,DATAMOVER_ADDR # Jump to copied data mover
+ basr %r14,%r14
+.Lbase_addr:
+ .quad .Lbase
+
+#
+# kdump data mover code (runs at address DATAMOVER_ADDR)
+#
+# r2: kdump base address
+# r3: kdump size
+#
+.Lcopy_start:
+ basr %r13,0 # Base
+0:
+ lgr %r11,%r2 # Save kdump base address
+ lgr %r12,%r2
+ agr %r12,%r3 # Compute kdump end address
+
+ lghi %r5,0
+ lghi %r10,COPY_PAGE_ADDR # Load copy page address
+1:
+ mvc 0(256,%r10),0(%r5) # Copy old kernel to tmp
+ mvc 0(256,%r5),0(%r11) # Copy new kernel to old
+ mvc 0(256,%r11),0(%r10) # Copy tmp to new
+ aghi %r11,256
+ aghi %r5,256
+ clgr %r11,%r12
+ jl 1b
+
+ lg %r14,.Lstartup_kdump-0b(%r13)
+ basr %r14,%r14 # Start relocated kernel
+.Lstartup_kdump:
+ .long 0x00000000,0x00000000 + startup_kdump_relocated
+.Lcopy_end:
+
+#
+# Startup of kdump (relocated new kernel)
+#
+.align 2
+startup_kdump_relocated:
+ basr %r13,0
+0:
+ mvc 0(8,%r0),.Lrestart_psw-0b(%r13) # Setup restart PSW
+ mvc 464(16,%r0),.Lpgm_psw-0b(%r13) # Setup pgm check PSW
+ lhi %r1,1 # Start new kernel
+ diag %r1,%r1,0x308 # with diag 308
+
+.Lno_diag308: # No diag 308
+ sam31 # Switch to 31 bit addr mode
+ sr %r1,%r1 # Erase register r1
+ sr %r2,%r2 # Erase register r2
+ sigp %r1,%r2,0x12 # Switch to 31 bit arch mode
+ lpsw 0 # Start new kernel...
+.align 8
+.Lrestart_psw:
+ .long 0x00080000,0x80000000 + startup
+.Lpgm_psw:
+ .quad 0x0000000180000000,0x0000000000000000 + .Lno_diag308
+#else
+.align 2
+.Lep_startup_kdump:
+#ifdef CONFIG_64BIT
+ larl %r13,startup_kdump_crash
+ lpswe 0(%r13)
+.align 8
+startup_kdump_crash:
+ .quad 0x0002000080000000,0x0000000000000000 + startup_kdump_crash
+#else
+ basr %r13,0
+0: lpsw startup_kdump_crash-0b(%r13)
+.align 8
+startup_kdump_crash:
+ .long 0x000a0000,0x00000000 + startup_kdump_crash
+#endif /* CONFIG_64BIT */
+#endif /* CONFIG_CRASH_DUMP */
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 48c7102..affa8e6 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -16,6 +16,7 @@
#include <linux/ctype.h>
#include <linux/fs.h>
#include <linux/gfp.h>
+#include <linux/crash_dump.h>
#include <asm/ipl.h>
#include <asm/smp.h>
#include <asm/setup.h>
@@ -26,6 +27,7 @@
#include <asm/sclp.h>
#include <asm/sigp.h>
#include <asm/checksum.h>
+#include "entry.h"
#define IPL_PARM_BLOCK_VERSION 0
@@ -275,8 +277,8 @@
static struct kobj_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type);
/* VM IPL PARM routines */
-size_t reipl_get_ascii_vmparm(char *dest, size_t size,
- const struct ipl_parameter_block *ipb)
+static size_t reipl_get_ascii_vmparm(char *dest, size_t size,
+ const struct ipl_parameter_block *ipb)
{
int i;
size_t len;
@@ -338,8 +340,8 @@
return count;
}
-size_t reipl_append_ascii_scpdata(char *dest, size_t size,
- const struct ipl_parameter_block *ipb)
+static size_t reipl_append_ascii_scpdata(char *dest, size_t size,
+ const struct ipl_parameter_block *ipb)
{
size_t count;
size_t i;
@@ -1738,7 +1740,11 @@
void do_restart(void)
{
+ smp_restart_with_online_cpu();
smp_send_stop();
+#ifdef CONFIG_CRASH_DUMP
+ crash_kexec(NULL);
+#endif
on_restart_trigger.action->fn(&on_restart_trigger);
stop_run(&on_restart_trigger);
}
@@ -2009,7 +2015,7 @@
u32 dump_prefix_page;
-void s390_reset_system(void)
+void s390_reset_system(void (*func)(void *), void *data)
{
struct _lowcore *lc;
@@ -2028,15 +2034,19 @@
__ctl_clear_bit(0,28);
/* Set new machine check handler */
- S390_lowcore.mcck_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
+ S390_lowcore.mcck_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT;
S390_lowcore.mcck_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler;
/* Set new program check handler */
- S390_lowcore.program_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT;
S390_lowcore.program_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
- do_reset_calls();
-}
+ /* Store status at absolute zero */
+ store_status();
+ do_reset_calls();
+ if (func)
+ func(data);
+}
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 1f4050d..b9a7fdd 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -33,7 +33,8 @@
{.name = "EXT" },
{.name = "I/O" },
{.name = "CLK", .desc = "[EXT] Clock Comparator" },
- {.name = "IPI", .desc = "[EXT] Signal Processor" },
+ {.name = "EXC", .desc = "[EXT] External Call" },
+ {.name = "EMS", .desc = "[EXT] Emergency Signal" },
{.name = "TMR", .desc = "[EXT] CPU Timer" },
{.name = "TAL", .desc = "[EXT] Timing Alert" },
{.name = "PFL", .desc = "[EXT] Pseudo Page Fault" },
@@ -42,8 +43,8 @@
{.name = "SCP", .desc = "[EXT] Service Call" },
{.name = "IUC", .desc = "[EXT] IUCV" },
{.name = "CPM", .desc = "[EXT] CPU Measurement" },
+ {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt" },
{.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt" },
- {.name = "QDI", .desc = "[I/O] QDIO Interrupt" },
{.name = "DAS", .desc = "[I/O] DASD" },
{.name = "C15", .desc = "[I/O] 3215" },
{.name = "C70", .desc = "[I/O] 3270" },
@@ -53,6 +54,7 @@
{.name = "CLW", .desc = "[I/O] CLAW" },
{.name = "CTC", .desc = "[I/O] CTC" },
{.name = "APB", .desc = "[I/O] AP Bus" },
+ {.name = "CSC", .desc = "[I/O] CHSC Subchannel" },
{.name = "NMI", .desc = "[NMI] Machine Check" },
};
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 1d05d66..64b761a 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -635,7 +635,7 @@
asm volatile(".word 0x0002");
}
-void __kprobes jprobe_return_end(void)
+static void __used __kprobes jprobe_return_end(void)
{
asm volatile("bcr 0,0");
}
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index b09b9c62..3cd0f25 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -1,10 +1,11 @@
/*
* arch/s390/kernel/machine_kexec.c
*
- * Copyright IBM Corp. 2005,2006
+ * Copyright IBM Corp. 2005,2011
*
* Author(s): Rolf Adelsberger,
* Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Michael Holzheu <holzheu@linux.vnet.ibm.com>
*/
#include <linux/device.h>
@@ -21,12 +22,162 @@
#include <asm/smp.h>
#include <asm/reset.h>
#include <asm/ipl.h>
+#include <asm/diag.h>
+#include <asm/asm-offsets.h>
typedef void (*relocate_kernel_t)(kimage_entry_t *, unsigned long);
extern const unsigned char relocate_kernel[];
extern const unsigned long long relocate_kernel_len;
+#ifdef CONFIG_CRASH_DUMP
+
+void *fill_cpu_elf_notes(void *ptr, struct save_area *sa);
+
+/*
+ * Create ELF notes for one CPU
+ */
+static void add_elf_notes(int cpu)
+{
+ struct save_area *sa = (void *) 4608 + store_prefix();
+ void *ptr;
+
+ memcpy((void *) (4608UL + sa->pref_reg), sa, sizeof(*sa));
+ ptr = (u64 *) per_cpu_ptr(crash_notes, cpu);
+ ptr = fill_cpu_elf_notes(ptr, sa);
+ memset(ptr, 0, sizeof(struct elf_note));
+}
+
+/*
+ * Store status of next available physical CPU
+ */
+static int store_status_next(int start_cpu, int this_cpu)
+{
+ struct save_area *sa = (void *) 4608 + store_prefix();
+ int cpu, rc;
+
+ for (cpu = start_cpu; cpu < 65536; cpu++) {
+ if (cpu == this_cpu)
+ continue;
+ do {
+ rc = raw_sigp(cpu, sigp_stop_and_store_status);
+ } while (rc == sigp_busy);
+ if (rc != sigp_order_code_accepted)
+ continue;
+ if (sa->pref_reg)
+ return cpu;
+ }
+ return -1;
+}
+
+/*
+ * Initialize CPU ELF notes
+ */
+void setup_regs(void)
+{
+ unsigned long sa = S390_lowcore.prefixreg_save_area + SAVE_AREA_BASE;
+ int cpu, this_cpu, phys_cpu = 0, first = 1;
+
+ this_cpu = stap();
+
+ if (!S390_lowcore.prefixreg_save_area)
+ first = 0;
+ for_each_online_cpu(cpu) {
+ if (first) {
+ add_elf_notes(cpu);
+ first = 0;
+ continue;
+ }
+ phys_cpu = store_status_next(phys_cpu, this_cpu);
+ if (phys_cpu == -1)
+ break;
+ add_elf_notes(cpu);
+ phys_cpu++;
+ }
+ /* Copy dump CPU store status info to absolute zero */
+ memcpy((void *) SAVE_AREA_BASE, (void *) sa, sizeof(struct save_area));
+}
+
+#endif
+
+/*
+ * Start kdump: We expect here that a store status has been done on our CPU
+ */
+static void __do_machine_kdump(void *image)
+{
+#ifdef CONFIG_CRASH_DUMP
+ int (*start_kdump)(int) = (void *)((struct kimage *) image)->start;
+
+ __load_psw_mask(PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA);
+ setup_regs();
+ start_kdump(1);
+#endif
+}
+
+/*
+ * Check if kdump checksums are valid: We call purgatory with parameter "0"
+ */
+static int kdump_csum_valid(struct kimage *image)
+{
+#ifdef CONFIG_CRASH_DUMP
+ int (*start_kdump)(int) = (void *)image->start;
+ int rc;
+
+ __arch_local_irq_stnsm(0xfb); /* disable DAT */
+ rc = start_kdump(0);
+ __arch_local_irq_stosm(0x04); /* enable DAT */
+ return rc ? 0 : -EINVAL;
+#else
+ return -EINVAL;
+#endif
+}
+
+/*
+ * Map or unmap crashkernel memory
+ */
+static void crash_map_pages(int enable)
+{
+ unsigned long size = resource_size(&crashk_res);
+
+ BUG_ON(crashk_res.start % KEXEC_CRASH_MEM_ALIGN ||
+ size % KEXEC_CRASH_MEM_ALIGN);
+ if (enable)
+ vmem_add_mapping(crashk_res.start, size);
+ else
+ vmem_remove_mapping(crashk_res.start, size);
+}
+
+/*
+ * Map crashkernel memory
+ */
+void crash_map_reserved_pages(void)
+{
+ crash_map_pages(1);
+}
+
+/*
+ * Unmap crashkernel memory
+ */
+void crash_unmap_reserved_pages(void)
+{
+ crash_map_pages(0);
+}
+
+/*
+ * Give back memory to hypervisor before new kdump is loaded
+ */
+static int machine_kexec_prepare_kdump(void)
+{
+#ifdef CONFIG_CRASH_DUMP
+ if (MACHINE_IS_VM)
+ diag10_range(PFN_DOWN(crashk_res.start),
+ PFN_DOWN(crashk_res.end - crashk_res.start + 1));
+ return 0;
+#else
+ return -EINVAL;
+#endif
+}
+
int machine_kexec_prepare(struct kimage *image)
{
void *reboot_code_buffer;
@@ -35,6 +186,9 @@
if (ipl_flags & IPL_NSS_VALID)
return -ENOSYS;
+ if (image->type == KEXEC_TYPE_CRASH)
+ return machine_kexec_prepare_kdump();
+
/* We don't support anything but the default image type for now. */
if (image->type != KEXEC_TYPE_DEFAULT)
return -EINVAL;
@@ -51,27 +205,53 @@
{
}
+void arch_crash_save_vmcoreinfo(void)
+{
+ VMCOREINFO_SYMBOL(lowcore_ptr);
+ VMCOREINFO_LENGTH(lowcore_ptr, NR_CPUS);
+}
+
void machine_shutdown(void)
{
}
-static void __machine_kexec(void *data)
+/*
+ * Do normal kexec
+ */
+static void __do_machine_kexec(void *data)
{
relocate_kernel_t data_mover;
struct kimage *image = data;
- pfault_fini();
- s390_reset_system();
-
data_mover = (relocate_kernel_t) page_to_phys(image->control_code_page);
/* Call the moving routine */
(*data_mover)(&image->head, image->start);
- for (;;);
}
+/*
+ * Reset system and call either kdump or normal kexec
+ */
+static void __machine_kexec(void *data)
+{
+ struct kimage *image = data;
+
+ pfault_fini();
+ if (image->type == KEXEC_TYPE_CRASH)
+ s390_reset_system(__do_machine_kdump, data);
+ else
+ s390_reset_system(__do_machine_kexec, data);
+ disabled_wait((unsigned long) __builtin_return_address(0));
+}
+
+/*
+ * Do either kdump or normal kexec. In case of kdump we first ask
+ * purgatory, if kdump checksums are valid.
+ */
void machine_kexec(struct kimage *image)
{
+ if (image->type == KEXEC_TYPE_CRASH && !kdump_csum_valid(image))
+ return;
tracer_disable();
smp_send_stop();
smp_switch_to_ipl_cpu(__machine_kexec, image);
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 0fbe4e3..19b4568 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -62,3 +62,72 @@
arch_local_irq_restore(flags);
}
EXPORT_SYMBOL(detect_memory_layout);
+
+/*
+ * Create memory hole with given address, size, and type
+ */
+void create_mem_hole(struct mem_chunk chunks[], unsigned long addr,
+ unsigned long size, int type)
+{
+ unsigned long start, end, new_size;
+ int i;
+
+ for (i = 0; i < MEMORY_CHUNKS; i++) {
+ if (chunks[i].size == 0)
+ continue;
+ if (addr + size < chunks[i].addr)
+ continue;
+ if (addr >= chunks[i].addr + chunks[i].size)
+ continue;
+ start = max(addr, chunks[i].addr);
+ end = min(addr + size, chunks[i].addr + chunks[i].size);
+ new_size = end - start;
+ if (new_size == 0)
+ continue;
+ if (start == chunks[i].addr &&
+ end == chunks[i].addr + chunks[i].size) {
+ /* Remove chunk */
+ chunks[i].type = type;
+ } else if (start == chunks[i].addr) {
+ /* Make chunk smaller at start */
+ if (i >= MEMORY_CHUNKS - 1)
+ panic("Unable to create memory hole");
+ memmove(&chunks[i + 1], &chunks[i],
+ sizeof(struct mem_chunk) *
+ (MEMORY_CHUNKS - (i + 1)));
+ chunks[i + 1].addr = chunks[i].addr + new_size;
+ chunks[i + 1].size = chunks[i].size - new_size;
+ chunks[i].size = new_size;
+ chunks[i].type = type;
+ i += 1;
+ } else if (end == chunks[i].addr + chunks[i].size) {
+ /* Make chunk smaller at end */
+ if (i >= MEMORY_CHUNKS - 1)
+ panic("Unable to create memory hole");
+ memmove(&chunks[i + 1], &chunks[i],
+ sizeof(struct mem_chunk) *
+ (MEMORY_CHUNKS - (i + 1)));
+ chunks[i + 1].addr = start;
+ chunks[i + 1].size = new_size;
+ chunks[i + 1].type = type;
+ chunks[i].size -= new_size;
+ i += 1;
+ } else {
+ /* Create memory hole */
+ if (i >= MEMORY_CHUNKS - 2)
+ panic("Unable to create memory hole");
+ memmove(&chunks[i + 2], &chunks[i],
+ sizeof(struct mem_chunk) *
+ (MEMORY_CHUNKS - (i + 2)));
+ chunks[i + 1].addr = addr;
+ chunks[i + 1].size = size;
+ chunks[i + 1].type = type;
+ chunks[i + 2].addr = addr + size;
+ chunks[i + 2].size =
+ chunks[i].addr + chunks[i].size - (addr + size);
+ chunks[i + 2].type = chunks[i].type;
+ chunks[i].size = addr - chunks[i].addr;
+ i += 2;
+ }
+ }
+}
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 541a750..9451b21 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -12,6 +12,7 @@
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/elfcore.h>
#include <linux/smp.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -117,7 +118,8 @@
struct pt_regs regs;
memset(®s, 0, sizeof(regs));
- regs.psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT;
+ regs.psw.mask = psw_kernel_bits |
+ PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
regs.psw.addr = (unsigned long) kernel_thread_starter | PSW_ADDR_AMODE;
regs.gprs[9] = (unsigned long) fn;
regs.gprs[10] = (unsigned long) arg;
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 311e9d7..6e0073e 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -74,7 +74,7 @@
static void *c_start(struct seq_file *m, loff_t *pos)
{
- return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL;
+ return *pos < nr_cpu_ids ? (void *)((unsigned long) *pos + 1) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index ef86ad2..450931a 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -42,34 +42,37 @@
REGSET_GENERAL,
REGSET_FP,
REGSET_LAST_BREAK,
+ REGSET_SYSTEM_CALL,
REGSET_GENERAL_EXTENDED,
};
void update_per_regs(struct task_struct *task)
{
- static const struct per_regs per_single_step = {
- .control = PER_EVENT_IFETCH,
- .start = 0,
- .end = PSW_ADDR_INSN,
- };
struct pt_regs *regs = task_pt_regs(task);
struct thread_struct *thread = &task->thread;
- const struct per_regs *new;
- struct per_regs old;
+ struct per_regs old, new;
- /* TIF_SINGLE_STEP overrides the user specified PER registers. */
- new = test_tsk_thread_flag(task, TIF_SINGLE_STEP) ?
- &per_single_step : &thread->per_user;
+ /* Copy user specified PER registers */
+ new.control = thread->per_user.control;
+ new.start = thread->per_user.start;
+ new.end = thread->per_user.end;
+
+ /* merge TIF_SINGLE_STEP into user specified PER registers. */
+ if (test_tsk_thread_flag(task, TIF_SINGLE_STEP)) {
+ new.control |= PER_EVENT_IFETCH;
+ new.start = 0;
+ new.end = PSW_ADDR_INSN;
+ }
/* Take care of the PER enablement bit in the PSW. */
- if (!(new->control & PER_EVENT_MASK)) {
+ if (!(new.control & PER_EVENT_MASK)) {
regs->psw.mask &= ~PSW_MASK_PER;
return;
}
regs->psw.mask |= PSW_MASK_PER;
__ctl_store(old, 9, 11);
- if (memcmp(new, &old, sizeof(struct per_regs)) != 0)
- __ctl_load(*new, 9, 11);
+ if (memcmp(&new, &old, sizeof(struct per_regs)) != 0)
+ __ctl_load(new, 9, 11);
}
void user_enable_single_step(struct task_struct *task)
@@ -166,8 +169,8 @@
*/
tmp = *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr);
if (addr == (addr_t) &dummy->regs.psw.mask)
- /* Remove per bit from user psw. */
- tmp &= ~PSW_MASK_PER;
+ /* Return a clean psw mask. */
+ tmp = psw_user_bits | (tmp & PSW_MASK_USER);
} else if (addr < (addr_t) &dummy->regs.orig_gpr2) {
/*
@@ -289,18 +292,17 @@
* psw and gprs are stored on the stack
*/
if (addr == (addr_t) &dummy->regs.psw.mask &&
-#ifdef CONFIG_COMPAT
- data != PSW_MASK_MERGE(psw_user32_bits, data) &&
-#endif
- data != PSW_MASK_MERGE(psw_user_bits, data))
+ ((data & ~PSW_MASK_USER) != psw_user_bits ||
+ ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA))))
/* Invalid psw mask. */
return -EINVAL;
-#ifndef CONFIG_64BIT
if (addr == (addr_t) &dummy->regs.psw.addr)
- /* I'd like to reject addresses without the
- high order bit but older gdb's rely on it */
- data |= PSW_ADDR_AMODE;
-#endif
+ /*
+ * The debugger changed the instruction address,
+ * reset system call restart, see signal.c:do_signal
+ */
+ task_thread_info(child)->system_call = 0;
+
*(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data;
} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) {
@@ -495,21 +497,21 @@
__u32 tmp;
if (addr < (addr_t) &dummy32->regs.acrs) {
+ struct pt_regs *regs = task_pt_regs(child);
/*
* psw and gprs are stored on the stack
*/
if (addr == (addr_t) &dummy32->regs.psw.mask) {
/* Fake a 31 bit psw mask. */
- tmp = (__u32)(task_pt_regs(child)->psw.mask >> 32);
- tmp = PSW32_MASK_MERGE(psw32_user_bits, tmp);
+ tmp = (__u32)(regs->psw.mask >> 32);
+ tmp = psw32_user_bits | (tmp & PSW32_MASK_USER);
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
/* Fake a 31 bit psw address. */
- tmp = (__u32) task_pt_regs(child)->psw.addr |
- PSW32_ADDR_AMODE31;
+ tmp = (__u32) regs->psw.addr |
+ (__u32)(regs->psw.mask & PSW_MASK_BA);
} else {
/* gpr 0-15 */
- tmp = *(__u32 *)((addr_t) &task_pt_regs(child)->psw +
- addr*2 + 4);
+ tmp = *(__u32 *)((addr_t) ®s->psw + addr*2 + 4);
}
} else if (addr < (addr_t) (&dummy32->regs.orig_gpr2)) {
/*
@@ -594,24 +596,32 @@
addr_t offset;
if (addr < (addr_t) &dummy32->regs.acrs) {
+ struct pt_regs *regs = task_pt_regs(child);
/*
* psw, gprs, acrs and orig_gpr2 are stored on the stack
*/
if (addr == (addr_t) &dummy32->regs.psw.mask) {
/* Build a 64 bit psw mask from 31 bit mask. */
- if (tmp != PSW32_MASK_MERGE(psw32_user_bits, tmp))
+ if ((tmp & ~PSW32_MASK_USER) != psw32_user_bits)
/* Invalid psw mask. */
return -EINVAL;
- task_pt_regs(child)->psw.mask =
- PSW_MASK_MERGE(psw_user32_bits, (__u64) tmp << 32);
+ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+ (regs->psw.mask & PSW_MASK_BA) |
+ (__u64)(tmp & PSW32_MASK_USER) << 32;
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
/* Build a 64 bit psw address from 31 bit address. */
- task_pt_regs(child)->psw.addr =
- (__u64) tmp & PSW32_ADDR_INSN;
+ regs->psw.addr = (__u64) tmp & PSW32_ADDR_INSN;
+ /* Transfer 31 bit amode bit to psw mask. */
+ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) |
+ (__u64)(tmp & PSW32_ADDR_AMODE);
+ /*
+ * The debugger changed the instruction address,
+ * reset system call restart, see signal.c:do_signal
+ */
+ task_thread_info(child)->system_call = 0;
} else {
/* gpr 0-15 */
- *(__u32*)((addr_t) &task_pt_regs(child)->psw
- + addr*2 + 4) = tmp;
+ *(__u32*)((addr_t) ®s->psw + addr*2 + 4) = tmp;
}
} else if (addr < (addr_t) (&dummy32->regs.orig_gpr2)) {
/*
@@ -735,7 +745,7 @@
* debugger stored an invalid system call number. Skip
* the system call and the system call restart handling.
*/
- regs->svcnr = 0;
+ clear_thread_flag(TIF_SYSCALL);
ret = -1;
}
@@ -897,6 +907,26 @@
#endif
+static int s390_system_call_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ unsigned int *data = &task_thread_info(target)->system_call;
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ data, 0, sizeof(unsigned int));
+}
+
+static int s390_system_call_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ unsigned int *data = &task_thread_info(target)->system_call;
+ return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ data, 0, sizeof(unsigned int));
+}
+
static const struct user_regset s390_regsets[] = {
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
@@ -923,6 +953,14 @@
.get = s390_last_break_get,
},
#endif
+ [REGSET_SYSTEM_CALL] = {
+ .core_note_type = NT_S390_SYSTEM_CALL,
+ .n = 1,
+ .size = sizeof(unsigned int),
+ .align = sizeof(unsigned int),
+ .get = s390_system_call_get,
+ .set = s390_system_call_set,
+ },
};
static const struct user_regset_view user_s390_view = {
@@ -1102,6 +1140,14 @@
.align = sizeof(long),
.get = s390_compat_last_break_get,
},
+ [REGSET_SYSTEM_CALL] = {
+ .core_note_type = NT_S390_SYSTEM_CALL,
+ .n = 1,
+ .size = sizeof(compat_uint_t),
+ .align = sizeof(compat_uint_t),
+ .get = s390_system_call_get,
+ .set = s390_system_call_set,
+ },
[REGSET_GENERAL_EXTENDED] = {
.core_note_type = NT_S390_HIGH_GPRS,
.n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t),
diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S
index 303d961c..ad67c21 100644
--- a/arch/s390/kernel/reipl.S
+++ b/arch/s390/kernel/reipl.S
@@ -10,6 +10,12 @@
#include <asm/asm-offsets.h>
#
+# store_status: Empty implementation until kdump is supported on 31 bit
+#
+ENTRY(store_status)
+ br %r14
+
+#
# do_reipl_asm
# Parameter: r2 = schid of reipl device
#
diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S
index e690975..732a793 100644
--- a/arch/s390/kernel/reipl64.S
+++ b/arch/s390/kernel/reipl64.S
@@ -17,11 +17,11 @@
#
ENTRY(store_status)
/* Save register one and load save area base */
- stg %r1,__LC_SAVE_AREA_64(%r0)
+ stg %r1,__LC_SAVE_AREA+120(%r0)
lghi %r1,SAVE_AREA_BASE
/* General purpose registers */
stmg %r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- lg %r2,__LC_SAVE_AREA_64(%r0)
+ lg %r2,__LC_SAVE_AREA+120(%r0)
stg %r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1)
/* Control registers */
stctg %c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
@@ -62,8 +62,11 @@
larl %r2,store_status
stg %r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 8(%r1)
br %r14
-.align 8
+
+ .section .bss
+ .align 8
.Lclkcmp: .quad 0x0000000000000000
+ .previous
#
# do_reipl_asm
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 7b371c3..8ac6bfa 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -42,6 +42,9 @@
#include <linux/reboot.h>
#include <linux/topology.h>
#include <linux/ftrace.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+#include <linux/memory.h>
#include <asm/ipl.h>
#include <asm/uaccess.h>
@@ -57,12 +60,13 @@
#include <asm/ebcdic.h>
#include <asm/compat.h>
#include <asm/kvm_virtio.h>
+#include <asm/diag.h>
-long psw_kernel_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
- PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
-long psw_user_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
- PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
- PSW_MASK_PSTATE | PSW_DEFAULT_KEY);
+long psw_kernel_bits = PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_PRIMARY |
+ PSW_MASK_EA | PSW_MASK_BA;
+long psw_user_bits = PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT |
+ PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK |
+ PSW_MASK_PSTATE | PSW_ASC_HOME;
/*
* User copy operations.
@@ -274,22 +278,14 @@
unsigned int user_mode = HOME_SPACE_MODE;
EXPORT_SYMBOL_GPL(user_mode);
-static int set_amode_and_uaccess(unsigned long user_amode,
- unsigned long user32_amode)
+static int set_amode_primary(void)
{
- psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode |
- PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
- PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
+ psw_kernel_bits = (psw_kernel_bits & ~PSW_MASK_ASC) | PSW_ASC_HOME;
+ psw_user_bits = (psw_user_bits & ~PSW_MASK_ASC) | PSW_ASC_PRIMARY;
#ifdef CONFIG_COMPAT
- psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode |
- PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
- PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
- psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode |
- PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK |
- PSW32_MASK_PSTATE;
+ psw32_user_bits =
+ (psw32_user_bits & ~PSW32_MASK_ASC) | PSW32_ASC_PRIMARY;
#endif
- psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
- PSW_MASK_MCHECK | PSW_DEFAULT_KEY;
if (MACHINE_HAS_MVCOS) {
memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess));
@@ -325,7 +321,7 @@
static void setup_addressing_mode(void)
{
if (user_mode == PRIMARY_SPACE_MODE) {
- if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY))
+ if (set_amode_primary())
pr_info("Address spaces switched, "
"mvcos available\n");
else
@@ -344,24 +340,25 @@
*/
BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096);
lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
- lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+ lc->restart_psw.mask = psw_kernel_bits;
lc->restart_psw.addr =
PSW_ADDR_AMODE | (unsigned long) psw_restart_int_handler;
- if (user_mode != HOME_SPACE_MODE)
- lc->restart_psw.mask |= PSW_ASC_HOME;
- lc->external_new_psw.mask = psw_kernel_bits;
+ lc->external_new_psw.mask = psw_kernel_bits |
+ PSW_MASK_DAT | PSW_MASK_MCHECK;
lc->external_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
- lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT;
+ lc->svc_new_psw.mask = psw_kernel_bits |
+ PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
- lc->program_new_psw.mask = psw_kernel_bits;
+ lc->program_new_psw.mask = psw_kernel_bits |
+ PSW_MASK_DAT | PSW_MASK_MCHECK;
lc->program_new_psw.addr =
- PSW_ADDR_AMODE | (unsigned long)pgm_check_handler;
- lc->mcck_new_psw.mask =
- psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT;
+ PSW_ADDR_AMODE | (unsigned long) pgm_check_handler;
+ lc->mcck_new_psw.mask = psw_kernel_bits;
lc->mcck_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
- lc->io_new_psw.mask = psw_kernel_bits;
+ lc->io_new_psw.mask = psw_kernel_bits |
+ PSW_MASK_DAT | PSW_MASK_MCHECK;
lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
lc->clock_comparator = -1ULL;
lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
@@ -435,10 +432,14 @@
for (i = 0; i < MEMORY_CHUNKS; i++) {
if (!memory_chunk[i].size)
continue;
+ if (memory_chunk[i].type == CHUNK_OLDMEM ||
+ memory_chunk[i].type == CHUNK_CRASHK)
+ continue;
res = alloc_bootmem_low(sizeof(*res));
res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
switch (memory_chunk[i].type) {
case CHUNK_READ_WRITE:
+ case CHUNK_CRASHK:
res->name = "System RAM";
break;
case CHUNK_READ_ONLY:
@@ -479,6 +480,7 @@
unsigned long max_mem;
int i;
+
#ifdef CONFIG_ZFCPDUMP
if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
memory_end = ZFCPDUMP_HSA_SIZE;
@@ -545,11 +547,201 @@
* Setup restart PSW for absolute zero lowcore. This is necesary
* if PSW restart is done on an offline CPU that has lowcore zero
*/
- psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+ psw.mask = PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_EA | PSW_MASK_BA;
psw.addr = PSW_ADDR_AMODE | (unsigned long) psw_restart_int_handler;
copy_to_absolute_zero(&S390_lowcore.restart_psw, &psw, sizeof(psw));
}
+static void __init setup_vmcoreinfo(void)
+{
+#ifdef CONFIG_KEXEC
+ unsigned long ptr = paddr_vmcoreinfo_note();
+
+ copy_to_absolute_zero(&S390_lowcore.vmcore_info, &ptr, sizeof(ptr));
+#endif
+}
+
+#ifdef CONFIG_CRASH_DUMP
+
+/*
+ * Find suitable location for crashkernel memory
+ */
+static unsigned long __init find_crash_base(unsigned long crash_size,
+ char **msg)
+{
+ unsigned long crash_base;
+ struct mem_chunk *chunk;
+ int i;
+
+ if (memory_chunk[0].size < crash_size) {
+ *msg = "first memory chunk must be at least crashkernel size";
+ return 0;
+ }
+ if (is_kdump_kernel() && (crash_size == OLDMEM_SIZE))
+ return OLDMEM_BASE;
+
+ for (i = MEMORY_CHUNKS - 1; i >= 0; i--) {
+ chunk = &memory_chunk[i];
+ if (chunk->size == 0)
+ continue;
+ if (chunk->type != CHUNK_READ_WRITE)
+ continue;
+ if (chunk->size < crash_size)
+ continue;
+ crash_base = (chunk->addr + chunk->size) - crash_size;
+ if (crash_base < crash_size)
+ continue;
+ if (crash_base < ZFCPDUMP_HSA_SIZE_MAX)
+ continue;
+ if (crash_base < (unsigned long) INITRD_START + INITRD_SIZE)
+ continue;
+ return crash_base;
+ }
+ *msg = "no suitable area found";
+ return 0;
+}
+
+/*
+ * Check if crash_base and crash_size is valid
+ */
+static int __init verify_crash_base(unsigned long crash_base,
+ unsigned long crash_size,
+ char **msg)
+{
+ struct mem_chunk *chunk;
+ int i;
+
+ /*
+ * Because we do the swap to zero, we must have at least 'crash_size'
+ * bytes free space before crash_base
+ */
+ if (crash_size > crash_base) {
+ *msg = "crashkernel offset must be greater than size";
+ return -EINVAL;
+ }
+
+ /* First memory chunk must be at least crash_size */
+ if (memory_chunk[0].size < crash_size) {
+ *msg = "first memory chunk must be at least crashkernel size";
+ return -EINVAL;
+ }
+ /* Check if we fit into the respective memory chunk */
+ for (i = 0; i < MEMORY_CHUNKS; i++) {
+ chunk = &memory_chunk[i];
+ if (chunk->size == 0)
+ continue;
+ if (crash_base < chunk->addr)
+ continue;
+ if (crash_base >= chunk->addr + chunk->size)
+ continue;
+ /* we have found the memory chunk */
+ if (crash_base + crash_size > chunk->addr + chunk->size) {
+ *msg = "selected memory chunk is too small for "
+ "crashkernel memory";
+ return -EINVAL;
+ }
+ return 0;
+ }
+ *msg = "invalid memory range specified";
+ return -EINVAL;
+}
+
+/*
+ * Reserve kdump memory by creating a memory hole in the mem_chunk array
+ */
+static void __init reserve_kdump_bootmem(unsigned long addr, unsigned long size,
+ int type)
+{
+
+ create_mem_hole(memory_chunk, addr, size, type);
+}
+
+/*
+ * When kdump is enabled, we have to ensure that no memory from
+ * the area [0 - crashkernel memory size] and
+ * [crashk_res.start - crashk_res.end] is set offline.
+ */
+static int kdump_mem_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct memory_notify *arg = data;
+
+ if (arg->start_pfn < PFN_DOWN(resource_size(&crashk_res)))
+ return NOTIFY_BAD;
+ if (arg->start_pfn > PFN_DOWN(crashk_res.end))
+ return NOTIFY_OK;
+ if (arg->start_pfn + arg->nr_pages - 1 < PFN_DOWN(crashk_res.start))
+ return NOTIFY_OK;
+ return NOTIFY_BAD;
+}
+
+static struct notifier_block kdump_mem_nb = {
+ .notifier_call = kdump_mem_notifier,
+};
+
+#endif
+
+/*
+ * Make sure that oldmem, where the dump is stored, is protected
+ */
+static void reserve_oldmem(void)
+{
+#ifdef CONFIG_CRASH_DUMP
+ if (!OLDMEM_BASE)
+ return;
+
+ reserve_kdump_bootmem(OLDMEM_BASE, OLDMEM_SIZE, CHUNK_OLDMEM);
+ reserve_kdump_bootmem(OLDMEM_SIZE, memory_end - OLDMEM_SIZE,
+ CHUNK_OLDMEM);
+ if (OLDMEM_BASE + OLDMEM_SIZE == real_memory_size)
+ saved_max_pfn = PFN_DOWN(OLDMEM_BASE) - 1;
+ else
+ saved_max_pfn = PFN_DOWN(real_memory_size) - 1;
+#endif
+}
+
+/*
+ * Reserve memory for kdump kernel to be loaded with kexec
+ */
+static void __init reserve_crashkernel(void)
+{
+#ifdef CONFIG_CRASH_DUMP
+ unsigned long long crash_base, crash_size;
+ char *msg;
+ int rc;
+
+ rc = parse_crashkernel(boot_command_line, memory_end, &crash_size,
+ &crash_base);
+ if (rc || crash_size == 0)
+ return;
+ crash_base = ALIGN(crash_base, KEXEC_CRASH_MEM_ALIGN);
+ crash_size = ALIGN(crash_size, KEXEC_CRASH_MEM_ALIGN);
+ if (register_memory_notifier(&kdump_mem_nb))
+ return;
+ if (!crash_base)
+ crash_base = find_crash_base(crash_size, &msg);
+ if (!crash_base) {
+ pr_info("crashkernel reservation failed: %s\n", msg);
+ unregister_memory_notifier(&kdump_mem_nb);
+ return;
+ }
+ if (verify_crash_base(crash_base, crash_size, &msg)) {
+ pr_info("crashkernel reservation failed: %s\n", msg);
+ unregister_memory_notifier(&kdump_mem_nb);
+ return;
+ }
+ if (!OLDMEM_BASE && MACHINE_IS_VM)
+ diag10_range(PFN_DOWN(crash_base), PFN_DOWN(crash_size));
+ crashk_res.start = crash_base;
+ crashk_res.end = crash_base + crash_size - 1;
+ insert_resource(&iomem_resource, &crashk_res);
+ reserve_kdump_bootmem(crash_base, crash_size, CHUNK_CRASHK);
+ pr_info("Reserving %lluMB of memory at %lluMB "
+ "for crashkernel (System RAM: %luMB)\n",
+ crash_size >> 20, crash_base >> 20, memory_end >> 20);
+#endif
+}
+
static void __init
setup_memory(void)
{
@@ -580,6 +772,14 @@
if (PFN_PHYS(start_pfn) + bmap_size > INITRD_START) {
start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE;
+#ifdef CONFIG_CRASH_DUMP
+ if (OLDMEM_BASE) {
+ /* Move initrd behind kdump oldmem */
+ if (start + INITRD_SIZE > OLDMEM_BASE &&
+ start < OLDMEM_BASE + OLDMEM_SIZE)
+ start = OLDMEM_BASE + OLDMEM_SIZE;
+ }
+#endif
if (start + INITRD_SIZE > memory_end) {
pr_err("initrd extends beyond end of "
"memory (0x%08lx > 0x%08lx) "
@@ -610,7 +810,8 @@
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
unsigned long start_chunk, end_chunk, pfn;
- if (memory_chunk[i].type != CHUNK_READ_WRITE)
+ if (memory_chunk[i].type != CHUNK_READ_WRITE &&
+ memory_chunk[i].type != CHUNK_CRASHK)
continue;
start_chunk = PFN_DOWN(memory_chunk[i].addr);
end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size);
@@ -644,6 +845,15 @@
reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size,
BOOTMEM_DEFAULT);
+#ifdef CONFIG_CRASH_DUMP
+ if (crashk_res.start)
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1,
+ BOOTMEM_DEFAULT);
+ if (is_kdump_kernel())
+ reserve_bootmem(elfcorehdr_addr - OLDMEM_BASE,
+ PAGE_ALIGN(elfcorehdr_size), BOOTMEM_DEFAULT);
+#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (INITRD_START && INITRD_SIZE) {
if (INITRD_START + INITRD_SIZE <= memory_end) {
@@ -812,8 +1022,11 @@
setup_ipl();
setup_memory_end();
setup_addressing_mode();
+ reserve_oldmem();
+ reserve_crashkernel();
setup_memory();
setup_resources();
+ setup_vmcoreinfo();
setup_restart_psw();
setup_lowcore();
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 9a40e1c..05a85bc 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -30,6 +30,7 @@
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
+#include <asm/compat.h>
#include "entry.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -116,7 +117,8 @@
/* Copy a 'clean' PSW mask to the user to avoid leaking
information about whether PER is currently on. */
- user_sregs.regs.psw.mask = PSW_MASK_MERGE(psw_user_bits, regs->psw.mask);
+ user_sregs.regs.psw.mask = psw_user_bits |
+ (regs->psw.mask & PSW_MASK_USER);
user_sregs.regs.psw.addr = regs->psw.addr;
memcpy(&user_sregs.regs.gprs, ®s->gprs, sizeof(sregs->regs.gprs));
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
@@ -143,9 +145,13 @@
err = __copy_from_user(&user_sregs, sregs, sizeof(_sigregs));
if (err)
return err;
- regs->psw.mask = PSW_MASK_MERGE(regs->psw.mask,
- user_sregs.regs.psw.mask);
- regs->psw.addr = PSW_ADDR_AMODE | user_sregs.regs.psw.addr;
+ /* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */
+ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+ (user_sregs.regs.psw.mask & PSW_MASK_USER);
+ /* Check for invalid amode */
+ if (regs->psw.mask & PSW_MASK_EA)
+ regs->psw.mask |= PSW_MASK_BA;
+ regs->psw.addr = user_sregs.regs.psw.addr;
memcpy(®s->gprs, &user_sregs.regs.gprs, sizeof(sregs->regs.gprs));
memcpy(¤t->thread.acrs, &user_sregs.regs.acrs,
sizeof(sregs->regs.acrs));
@@ -156,7 +162,7 @@
current->thread.fp_regs.fpc &= FPC_VALID_MASK;
restore_fp_regs(¤t->thread.fp_regs);
- regs->svcnr = 0; /* disable syscall checks */
+ clear_thread_flag(TIF_SYSCALL); /* No longer in a system call */
return 0;
}
@@ -288,6 +294,7 @@
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
+ regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
@@ -356,6 +363,7 @@
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
+ regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
@@ -401,7 +409,6 @@
*/
void do_signal(struct pt_regs *regs)
{
- unsigned long retval = 0, continue_addr = 0, restart_addr = 0;
siginfo_t info;
int signr;
struct k_sigaction ka;
@@ -421,54 +428,45 @@
else
oldset = ¤t->blocked;
- /* Are we from a system call? */
- if (regs->svcnr) {
- continue_addr = regs->psw.addr;
- restart_addr = continue_addr - regs->ilc;
- retval = regs->gprs[2];
-
- /* Prepare for system call restart. We do this here so that a
- debugger will see the already changed PSW. */
- switch (retval) {
- case -ERESTARTNOHAND:
- case -ERESTARTSYS:
- case -ERESTARTNOINTR:
- regs->gprs[2] = regs->orig_gpr2;
- regs->psw.addr = restart_addr;
- break;
- case -ERESTART_RESTARTBLOCK:
- regs->gprs[2] = -EINTR;
- }
- regs->svcnr = 0; /* Don't deal with this again. */
- }
-
- /* Get signal to deliver. When running under ptrace, at this point
- the debugger may change all our registers ... */
+ /*
+ * Get signal to deliver. When running under ptrace, at this point
+ * the debugger may change all our registers, including the system
+ * call information.
+ */
+ current_thread_info()->system_call =
+ test_thread_flag(TIF_SYSCALL) ? regs->svc_code : 0;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- /* Depending on the signal settings we may need to revert the
- decision to restart the system call. */
- if (signr > 0 && regs->psw.addr == restart_addr) {
- if (retval == -ERESTARTNOHAND
- || (retval == -ERESTARTSYS
- && !(current->sighand->action[signr-1].sa.sa_flags
- & SA_RESTART))) {
- regs->gprs[2] = -EINTR;
- regs->psw.addr = continue_addr;
- }
- }
-
if (signr > 0) {
/* Whee! Actually deliver the signal. */
- int ret;
-#ifdef CONFIG_COMPAT
- if (is_compat_task()) {
- ret = handle_signal32(signr, &ka, &info, oldset, regs);
- }
- else
-#endif
- ret = handle_signal(signr, &ka, &info, oldset, regs);
- if (!ret) {
+ if (current_thread_info()->system_call) {
+ regs->svc_code = current_thread_info()->system_call;
+ /* Check for system call restarting. */
+ switch (regs->gprs[2]) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->gprs[2] = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ if (!(ka.sa.sa_flags & SA_RESTART)) {
+ regs->gprs[2] = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->gprs[2] = regs->orig_gpr2;
+ regs->psw.addr =
+ __rewind_psw(regs->psw,
+ regs->svc_code >> 16);
+ break;
+ }
+ /* No longer in a system call */
+ clear_thread_flag(TIF_SYSCALL);
+ }
+
+ if ((is_compat_task() ?
+ handle_signal32(signr, &ka, &info, oldset, regs) :
+ handle_signal(signr, &ka, &info, oldset, regs)) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
@@ -482,11 +480,32 @@
* Let tracing know that we've done the handler setup.
*/
tracehook_signal_handler(signr, &info, &ka, regs,
- test_thread_flag(TIF_SINGLE_STEP));
+ test_thread_flag(TIF_SINGLE_STEP));
}
return;
}
+ /* No handlers present - check for system call restart */
+ if (current_thread_info()->system_call) {
+ regs->svc_code = current_thread_info()->system_call;
+ switch (regs->gprs[2]) {
+ case -ERESTART_RESTARTBLOCK:
+ /* Restart with sys_restart_syscall */
+ regs->svc_code = __NR_restart_syscall;
+ /* fallthrough */
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ /* Restart system call with magic TIF bit. */
+ regs->gprs[2] = regs->orig_gpr2;
+ set_thread_flag(TIF_SYSCALL);
+ break;
+ default:
+ clear_thread_flag(TIF_SYSCALL);
+ break;
+ }
+ }
+
/*
* If there's no signal to deliver, we just put the saved sigmask back.
*/
@@ -494,13 +513,6 @@
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
-
- /* Restart a different system call. */
- if (retval == -ERESTART_RESTARTBLOCK
- && regs->psw.addr == continue_addr) {
- regs->gprs[2] = __NR_restart_syscall;
- set_thread_flag(TIF_RESTART_SVC);
- }
}
void do_notify_resume(struct pt_regs *regs)
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 6ab16ac..3ea8728 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -38,6 +38,7 @@
#include <linux/timex.h>
#include <linux/bootmem.h>
#include <linux/slab.h>
+#include <linux/crash_dump.h>
#include <asm/asm-offsets.h>
#include <asm/ipl.h>
#include <asm/setup.h>
@@ -97,6 +98,29 @@
return raw_cpu_stopped(cpu_logical_map(cpu));
}
+/*
+ * Ensure that PSW restart is done on an online CPU
+ */
+void smp_restart_with_online_cpu(void)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (stap() == __cpu_logical_map[cpu]) {
+ /* We are online: Enable DAT again and return */
+ __load_psw_mask(psw_kernel_bits | PSW_MASK_DAT);
+ return;
+ }
+ }
+ /* We are not online: Do PSW restart on an online CPU */
+ while (sigp(cpu, sigp_restart) == sigp_busy)
+ cpu_relax();
+ /* And stop ourself */
+ while (raw_sigp(stap(), sigp_stop) == sigp_busy)
+ cpu_relax();
+ for (;;);
+}
+
void smp_switch_to_ipl_cpu(void (*func)(void *), void *data)
{
struct _lowcore *lc, *current_lc;
@@ -106,14 +130,16 @@
if (smp_processor_id() == 0)
func(data);
- __load_psw_mask(PSW_BASE_BITS | PSW_DEFAULT_KEY);
+ __load_psw_mask(PSW_DEFAULT_KEY | PSW_MASK_BASE |
+ PSW_MASK_EA | PSW_MASK_BA);
/* Disable lowcore protection */
__ctl_clear_bit(0, 28);
current_lc = lowcore_ptr[smp_processor_id()];
lc = lowcore_ptr[0];
if (!lc)
lc = current_lc;
- lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+ lc->restart_psw.mask =
+ PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_EA | PSW_MASK_BA;
lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) smp_restart_cpu;
if (!cpu_online(0))
smp_switch_to_cpu(func, data, 0, stap(), __cpu_logical_map[0]);
@@ -135,7 +161,7 @@
int cpu, rc;
/* Disable all interrupts/machine checks */
- __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
+ __load_psw_mask(psw_kernel_bits | PSW_MASK_DAT);
trace_hardirqs_off();
/* stop all processors */
@@ -161,7 +187,10 @@
{
unsigned long bits;
- kstat_cpu(smp_processor_id()).irqs[EXTINT_IPI]++;
+ if (ext_int_code == 0x1202)
+ kstat_cpu(smp_processor_id()).irqs[EXTINT_EXC]++;
+ else
+ kstat_cpu(smp_processor_id()).irqs[EXTINT_EMS]++;
/*
* handle bit signal external calls
*/
@@ -183,12 +212,19 @@
*/
static void smp_ext_bitcall(int cpu, int sig)
{
+ int order;
+
/*
* Set signaling bit in lowcore of target cpu and kick it
*/
set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast);
- while (sigp(cpu, sigp_emergency_signal) == sigp_busy)
+ while (1) {
+ order = smp_vcpu_scheduled(cpu) ?
+ sigp_external_call : sigp_emergency_signal;
+ if (sigp(cpu, order) != sigp_busy)
+ break;
udelay(10);
+ }
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
@@ -281,11 +317,13 @@
}
EXPORT_SYMBOL(smp_ctl_clear_bit);
-#ifdef CONFIG_ZFCPDUMP
+#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP)
static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu)
{
- if (ipl_info.type != IPL_TYPE_FCP_DUMP)
+ if (ipl_info.type != IPL_TYPE_FCP_DUMP && !OLDMEM_BASE)
+ return;
+ if (is_kdump_kernel())
return;
if (cpu >= NR_CPUS) {
pr_warning("CPU %i exceeds the maximum %i and is excluded from "
@@ -403,6 +441,18 @@
info = kmalloc(sizeof(*info), GFP_KERNEL);
if (!info)
panic("smp_detect_cpus failed to allocate memory\n");
+#ifdef CONFIG_CRASH_DUMP
+ if (OLDMEM_BASE && !is_kdump_kernel()) {
+ struct save_area *save_area;
+
+ save_area = kmalloc(sizeof(*save_area), GFP_KERNEL);
+ if (!save_area)
+ panic("could not allocate memory for save area\n");
+ copy_oldmem_page(1, (void *) save_area, sizeof(*save_area),
+ 0x200, 0);
+ zfcpdump_save_areas[0] = save_area;
+ }
+#endif
/* Use sigp detection algorithm if sclp doesn't work. */
if (sclp_get_cpu_info(info)) {
smp_use_sigp_detection = 1;
@@ -463,7 +513,8 @@
set_cpu_online(smp_processor_id(), true);
ipi_call_unlock();
__ctl_clear_bit(0, 28); /* Disable lowcore protection */
- S390_lowcore.restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+ S390_lowcore.restart_psw.mask =
+ PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_EA | PSW_MASK_BA;
S390_lowcore.restart_psw.addr =
PSW_ADDR_AMODE | (unsigned long) psw_restart_int_handler;
__ctl_set_bit(0, 28); /* Enable lowcore protection */
@@ -511,7 +562,8 @@
memset((char *)lowcore + 512, 0, sizeof(*lowcore) - 512);
lowcore->async_stack = async_stack + ASYNC_SIZE;
lowcore->panic_stack = panic_stack + PAGE_SIZE;
- lowcore->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+ lowcore->restart_psw.mask =
+ PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_EA | PSW_MASK_BA;
lowcore->restart_psw.addr =
PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
if (user_mode != HOME_SPACE_MODE)
@@ -712,6 +764,9 @@
/* request the 0x1201 emergency signal external interrupt */
if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
panic("Couldn't request external interrupt 0x1201");
+ /* request the 0x1202 external call external interrupt */
+ if (register_external_interrupt(0x1202, do_ext_call_interrupt) != 0)
+ panic("Couldn't request external interrupt 0x1202");
/* Reallocate current lowcore, but keep its contents. */
lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, LC_ORDER);
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
index b6f9afe..47df775 100644
--- a/arch/s390/kernel/suspend.c
+++ b/arch/s390/kernel/suspend.c
@@ -7,6 +7,7 @@
*/
#include <linux/pfn.h>
+#include <linux/suspend.h>
#include <linux/mm.h>
#include <asm/system.h>
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index 5c9e439..2a94b77 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -442,7 +442,7 @@
*/
FP_UNPACK_SP(SA, &fmil);
if ((info->capability >> 23) == 0)
- FP_FROM_INT_S(SB, info->capability, 32, int);
+ FP_FROM_INT_S(SB, (long) info->capability, 64, long);
else
FP_UNPACK_SP(SB, &info->capability);
FP_DIV_S(SR, SA, SB);
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 8d65bd0..ebbfab3 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -48,6 +48,7 @@
#include <asm/timer.h>
#include <asm/etr.h>
#include <asm/cio.h>
+#include "entry.h"
/* change this if you have some constant time drift */
#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 0cd340b7..77b8942 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -299,8 +299,8 @@
}
__initcall(init_topology_update);
-static void alloc_masks(struct sysinfo_15_1_x *info, struct mask_info *mask,
- int offset)
+static void __init alloc_masks(struct sysinfo_15_1_x *info,
+ struct mask_info *mask, int offset)
{
int i, nr_masks;
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index ffabcd9..a9807dd 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -200,7 +200,7 @@
mask_bits(regs, PSW_MASK_PSTATE), mask_bits(regs, PSW_MASK_ASC),
mask_bits(regs, PSW_MASK_CC), mask_bits(regs, PSW_MASK_PM));
#ifdef CONFIG_64BIT
- printk(" EA:%x", mask_bits(regs, PSW_BASE_BITS));
+ printk(" EA:%x", mask_bits(regs, PSW_MASK_EA | PSW_MASK_BA));
#endif
printk("\n%s GPRS: " FOURLONG, mode,
regs->gprs[0], regs->gprs[1], regs->gprs[2], regs->gprs[3]);
@@ -334,7 +334,8 @@
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_HWBKPT;
- info.si_addr = (void *) current->thread.per_event.address;
+ info.si_addr =
+ (void __force __user *) current->thread.per_event.address;
force_sig_info(SIGTRAP, &info, current);
}
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 2d6228f..bb48977 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -170,7 +170,8 @@
psw_t psw;
/* Wait for external, I/O or machine check interrupt. */
- psw.mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_IO | PSW_MASK_EXT;
+ psw.mask = psw_kernel_bits | PSW_MASK_WAIT |
+ PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
idle->nohz_delay = 0;
@@ -183,7 +184,8 @@
* set_cpu_timer(VTIMER_MAX_SLICE);
* idle->idle_enter = get_clock();
* __load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT |
- * PSW_MASK_IO | PSW_MASK_EXT);
+ * PSW_MASK_DAT | PSW_MASK_IO |
+ * PSW_MASK_EXT | PSW_MASK_MCHECK);
* The difference is that the inline assembly makes sure that
* the last three instruction are stpt, stck and lpsw in that
* order. This is done to increase the precision.
@@ -216,7 +218,8 @@
* vq->idle = get_cpu_timer();
* idle->idle_enter = get_clock();
* __load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT |
- * PSW_MASK_IO | PSW_MASK_EXT);
+ * PSW_MASK_DAT | PSW_MASK_IO |
+ * PSW_MASK_EXT | PSW_MASK_MCHECK);
* The difference is that the inline assembly makes sure that
* the last three instruction are stpt, stck and lpsw in that
* order. This is done to increase the precision.
@@ -458,7 +461,7 @@
}
EXPORT_SYMBOL(add_virt_timer_periodic);
-int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic)
+static int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic)
{
struct vtimer_queue *vq;
unsigned long flags;
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 9e4c841..87cedd6 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -1,7 +1,7 @@
/*
* diag.c - handling diagnose instructions
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2011
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
@@ -15,6 +15,34 @@
#include <linux/kvm_host.h>
#include "kvm-s390.h"
+static int diag_release_pages(struct kvm_vcpu *vcpu)
+{
+ unsigned long start, end;
+ unsigned long prefix = vcpu->arch.sie_block->prefix;
+
+ start = vcpu->arch.guest_gprs[(vcpu->arch.sie_block->ipa & 0xf0) >> 4];
+ end = vcpu->arch.guest_gprs[vcpu->arch.sie_block->ipa & 0xf] + 4096;
+
+ if (start & ~PAGE_MASK || end & ~PAGE_MASK || start > end
+ || start < 2 * PAGE_SIZE)
+ return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
+ VCPU_EVENT(vcpu, 5, "diag release pages %lX %lX", start, end);
+ vcpu->stat.diagnose_10++;
+
+ /* we checked for start > end above */
+ if (end < prefix || start >= prefix + 2 * PAGE_SIZE) {
+ gmap_discard(start, end, vcpu->arch.gmap);
+ } else {
+ if (start < prefix)
+ gmap_discard(start, prefix, vcpu->arch.gmap);
+ if (end >= prefix)
+ gmap_discard(prefix + 2 * PAGE_SIZE,
+ end, vcpu->arch.gmap);
+ }
+ return 0;
+}
+
static int __diag_time_slice_end(struct kvm_vcpu *vcpu)
{
VCPU_EVENT(vcpu, 5, "%s", "diag time slice end");
@@ -57,6 +85,8 @@
int code = (vcpu->arch.sie_block->ipb & 0xfff0000) >> 16;
switch (code) {
+ case 0x10:
+ return diag_release_pages(vcpu);
case 0x44:
return __diag_time_slice_end(vcpu);
case 0x308:
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index c9aeb4b..87c1670 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -38,6 +38,11 @@
struct kvm_s390_interrupt_info *inti)
{
switch (inti->type) {
+ case KVM_S390_INT_EXTERNAL_CALL:
+ if (psw_extint_disabled(vcpu))
+ return 0;
+ if (vcpu->arch.sie_block->gcr[0] & 0x2000ul)
+ return 1;
case KVM_S390_INT_EMERGENCY:
if (psw_extint_disabled(vcpu))
return 0;
@@ -98,6 +103,7 @@
struct kvm_s390_interrupt_info *inti)
{
switch (inti->type) {
+ case KVM_S390_INT_EXTERNAL_CALL:
case KVM_S390_INT_EMERGENCY:
case KVM_S390_INT_SERVICE:
case KVM_S390_INT_VIRTIO:
@@ -143,6 +149,28 @@
exception = 1;
break;
+ case KVM_S390_INT_EXTERNAL_CALL:
+ VCPU_EVENT(vcpu, 4, "%s", "interrupt: sigp ext call");
+ vcpu->stat.deliver_external_call++;
+ rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x1202);
+ if (rc == -EFAULT)
+ exception = 1;
+
+ rc = put_guest_u16(vcpu, __LC_CPU_ADDRESS, inti->extcall.code);
+ if (rc == -EFAULT)
+ exception = 1;
+
+ rc = copy_to_guest(vcpu, __LC_EXT_OLD_PSW,
+ &vcpu->arch.sie_block->gpsw, sizeof(psw_t));
+ if (rc == -EFAULT)
+ exception = 1;
+
+ rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw,
+ __LC_EXT_NEW_PSW, sizeof(psw_t));
+ if (rc == -EFAULT)
+ exception = 1;
+ break;
+
case KVM_S390_INT_SERVICE:
VCPU_EVENT(vcpu, 4, "interrupt: sclp parm:%x",
inti->ext.ext_params);
@@ -522,6 +550,7 @@
break;
case KVM_S390_PROGRAM_INT:
case KVM_S390_SIGP_STOP:
+ case KVM_S390_INT_EXTERNAL_CALL:
case KVM_S390_INT_EMERGENCY:
default:
kfree(inti);
@@ -581,6 +610,7 @@
break;
case KVM_S390_SIGP_STOP:
case KVM_S390_RESTART:
+ case KVM_S390_INT_EXTERNAL_CALL:
case KVM_S390_INT_EMERGENCY:
VCPU_EVENT(vcpu, 3, "inject: type %x", s390int->type);
inti->type = s390int->type;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index dc2b580..0bd3bea1 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -46,6 +46,7 @@
{ "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
{ "instruction_lctl", VCPU_STAT(instruction_lctl) },
{ "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
+ { "deliver_external_call", VCPU_STAT(deliver_external_call) },
{ "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
{ "deliver_virtio_interrupt", VCPU_STAT(deliver_virtio_interrupt) },
{ "deliver_stop_signal", VCPU_STAT(deliver_stop_signal) },
@@ -64,11 +65,13 @@
{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
+ { "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
{ "instruction_sigp_set_arch", VCPU_STAT(instruction_sigp_arch) },
{ "instruction_sigp_set_prefix", VCPU_STAT(instruction_sigp_prefix) },
{ "instruction_sigp_restart", VCPU_STAT(instruction_sigp_restart) },
+ { "diagnose_10", VCPU_STAT(diagnose_10) },
{ "diagnose_44", VCPU_STAT(diagnose_44) },
{ NULL }
};
@@ -175,6 +178,8 @@
if (rc)
goto out_err;
+ rc = -ENOMEM;
+
kvm->arch.sca = (struct sca_block *) get_zeroed_page(GFP_KERNEL);
if (!kvm->arch.sca)
goto out_err;
@@ -312,11 +317,17 @@
struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
unsigned int id)
{
- struct kvm_vcpu *vcpu = kzalloc(sizeof(struct kvm_vcpu), GFP_KERNEL);
- int rc = -ENOMEM;
+ struct kvm_vcpu *vcpu;
+ int rc = -EINVAL;
+ if (id >= KVM_MAX_VCPUS)
+ goto out;
+
+ rc = -ENOMEM;
+
+ vcpu = kzalloc(sizeof(struct kvm_vcpu), GFP_KERNEL);
if (!vcpu)
- goto out_nomem;
+ goto out;
vcpu->arch.sie_block = (struct kvm_s390_sie_block *)
get_zeroed_page(GFP_KERNEL);
@@ -352,7 +363,7 @@
free_page((unsigned long)(vcpu->arch.sie_block));
out_free_cpu:
kfree(vcpu);
-out_nomem:
+out:
return ERR_PTR(rc);
}
@@ -386,6 +397,7 @@
{
memcpy(&vcpu->arch.guest_acrs, &sregs->acrs, sizeof(sregs->acrs));
memcpy(&vcpu->arch.sie_block->gcr, &sregs->crs, sizeof(sregs->crs));
+ restore_access_regs(vcpu->arch.guest_acrs);
return 0;
}
@@ -401,6 +413,7 @@
{
memcpy(&vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
vcpu->arch.guest_fpregs.fpc = fpu->fpc;
+ restore_fp_regs(&vcpu->arch.guest_fpregs);
return 0;
}
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index d6a50c1..f815118 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -87,6 +87,7 @@
return -ENOMEM;
inti->type = KVM_S390_INT_EMERGENCY;
+ inti->emerg.code = vcpu->vcpu_id;
spin_lock(&fi->lock);
li = fi->local_int[cpu_addr];
@@ -103,9 +104,47 @@
wake_up_interruptible(&li->wq);
spin_unlock_bh(&li->lock);
rc = 0; /* order accepted */
+ VCPU_EVENT(vcpu, 4, "sent sigp emerg to cpu %x", cpu_addr);
unlock:
spin_unlock(&fi->lock);
- VCPU_EVENT(vcpu, 4, "sent sigp emerg to cpu %x", cpu_addr);
+ return rc;
+}
+
+static int __sigp_external_call(struct kvm_vcpu *vcpu, u16 cpu_addr)
+{
+ struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+ struct kvm_s390_local_interrupt *li;
+ struct kvm_s390_interrupt_info *inti;
+ int rc;
+
+ if (cpu_addr >= KVM_MAX_VCPUS)
+ return 3; /* not operational */
+
+ inti = kzalloc(sizeof(*inti), GFP_KERNEL);
+ if (!inti)
+ return -ENOMEM;
+
+ inti->type = KVM_S390_INT_EXTERNAL_CALL;
+ inti->extcall.code = vcpu->vcpu_id;
+
+ spin_lock(&fi->lock);
+ li = fi->local_int[cpu_addr];
+ if (li == NULL) {
+ rc = 3; /* not operational */
+ kfree(inti);
+ goto unlock;
+ }
+ spin_lock_bh(&li->lock);
+ list_add_tail(&inti->list, &li->list);
+ atomic_set(&li->active, 1);
+ atomic_set_mask(CPUSTAT_EXT_INT, li->cpuflags);
+ if (waitqueue_active(&li->wq))
+ wake_up_interruptible(&li->wq);
+ spin_unlock_bh(&li->lock);
+ rc = 0; /* order accepted */
+ VCPU_EVENT(vcpu, 4, "sent sigp ext call to cpu %x", cpu_addr);
+unlock:
+ spin_unlock(&fi->lock);
return rc;
}
@@ -267,6 +306,10 @@
rc = __sigp_sense(vcpu, cpu_addr,
&vcpu->arch.guest_gprs[r1]);
break;
+ case SIGP_EXTERNAL_CALL:
+ vcpu->stat.instruction_sigp_external_call++;
+ rc = __sigp_external_call(vcpu, cpu_addr);
+ break;
case SIGP_EMERGENCY:
vcpu->stat.instruction_sigp_emergency++;
rc = __sigp_emergency(vcpu, cpu_addr);
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index a65229d..db92f04 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -32,7 +32,8 @@
u64 clock_saved;
u64 end;
- mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+ mask = psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_WAIT |
+ PSW_MASK_EXT | PSW_MASK_MCHECK;
end = get_clock() + (usecs << 12);
clock_saved = local_tick_disable();
__ctl_store(cr0_saved, 0, 0);
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 7483383..342ae35 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -342,7 +342,8 @@
if (segment_eq(get_fs(), KERNEL_DS))
return __futex_atomic_op_pt(op, uaddr, oparg, old);
spin_lock(¤t->mm->page_table_lock);
- uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
+ uaddr = (u32 __force __user *)
+ __dat_user_addr((__force unsigned long) uaddr);
if (!uaddr) {
spin_unlock(¤t->mm->page_table_lock);
return -EFAULT;
@@ -378,7 +379,8 @@
if (segment_eq(get_fs(), KERNEL_DS))
return __futex_atomic_cmpxchg_pt(uval, uaddr, oldval, newval);
spin_lock(¤t->mm->page_table_lock);
- uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
+ uaddr = (u32 __force __user *)
+ __dat_user_addr((__force unsigned long) uaddr);
if (!uaddr) {
spin_unlock(¤t->mm->page_table_lock);
return -EFAULT;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 9564fc7..1766def 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -307,7 +307,7 @@
#ifdef CONFIG_PGSTE
if (test_tsk_thread_flag(current, TIF_SIE) && S390_lowcore.gmap) {
- address = gmap_fault(address,
+ address = __gmap_fault(address,
(struct gmap *) S390_lowcore.gmap);
if (address == -EFAULT) {
fault = VM_FAULT_BADMAP;
@@ -393,7 +393,7 @@
int fault;
/* Protection exception is suppressing, decrement psw address. */
- regs->psw.addr -= (pgm_int_code >> 16);
+ regs->psw.addr = __rewind_psw(regs->psw, pgm_int_code >> 16);
/*
* Check for low-address protection. This needs to be treated
* as a special case because the translation exception code
@@ -454,7 +454,7 @@
struct pt_regs regs;
int access, fault;
- regs.psw.mask = psw_kernel_bits;
+ regs.psw.mask = psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK;
if (!irqs_disabled())
regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT;
regs.psw.addr = (unsigned long) __builtin_return_address(0);
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 45b405c..65cb06e 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -52,7 +52,7 @@
unsigned long end, int write, struct page **pages, int *nr)
{
unsigned long mask, result;
- struct page *head, *page;
+ struct page *head, *page, *tail;
int refs;
result = write ? 0 : _SEGMENT_ENTRY_RO;
@@ -64,6 +64,7 @@
refs = 0;
head = pmd_page(pmd);
page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+ tail = page;
do {
VM_BUG_ON(compound_head(page) != head);
pages[*nr] = page;
@@ -81,6 +82,17 @@
*nr -= refs;
while (refs--)
put_page(head);
+ return 0;
+ }
+
+ /*
+ * Any tail page need their mapcount reference taken before we
+ * return.
+ */
+ while (refs--) {
+ if (PageTail(tail))
+ get_huge_page_tail(tail);
+ tail++;
}
return 1;
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 5dbbaa6..1cb8427b 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <asm/system.h>
/*
@@ -60,6 +61,9 @@
return copied < 0 ? -EFAULT : 0;
}
+/*
+ * Copy memory in real mode (kernel to kernel)
+ */
int memcpy_real(void *dest, void *src, size_t count)
{
register unsigned long _dest asm("2") = (unsigned long) dest;
@@ -101,3 +105,55 @@
__ctl_load(cr0, 0, 0);
preempt_enable();
}
+
+/*
+ * Copy memory from kernel (real) to user (virtual)
+ */
+int copy_to_user_real(void __user *dest, void *src, size_t count)
+{
+ int offs = 0, size, rc;
+ char *buf;
+
+ buf = (char *) __get_free_page(GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ rc = -EFAULT;
+ while (offs < count) {
+ size = min(PAGE_SIZE, count - offs);
+ if (memcpy_real(buf, src + offs, size))
+ goto out;
+ if (copy_to_user(dest + offs, buf, size))
+ goto out;
+ offs += size;
+ }
+ rc = 0;
+out:
+ free_page((unsigned long) buf);
+ return rc;
+}
+
+/*
+ * Copy memory from user (virtual) to kernel (real)
+ */
+int copy_from_user_real(void *dest, void __user *src, size_t count)
+{
+ int offs = 0, size, rc;
+ char *buf;
+
+ buf = (char *) __get_free_page(GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ rc = -EFAULT;
+ while (offs < count) {
+ size = min(PAGE_SIZE, count - offs);
+ if (copy_from_user(buf, src + offs, size))
+ goto out;
+ if (memcpy_real(dest + offs, buf, size))
+ goto out;
+ offs += size;
+ }
+ rc = 0;
+out:
+ free_page((unsigned long) buf);
+ return rc;
+}
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index c9a9f7f..f09c748 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -26,6 +26,7 @@
#include <linux/personality.h>
#include <linux/mm.h>
+#include <linux/mman.h>
#include <linux/module.h>
#include <linux/random.h>
#include <asm/pgalloc.h>
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index d013ed3..b36537a 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -5,6 +5,7 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
+#include <asm/cacheflush.h>
#include <asm/pgtable.h>
static void change_page_attr(unsigned long addr, int numpages,
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 5d56c2b..301c84d 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -1,5 +1,5 @@
/*
- * Copyright IBM Corp. 2007,2009
+ * Copyright IBM Corp. 2007,2011
* Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
@@ -222,6 +222,7 @@
/* Free all segment & region tables. */
down_read(&gmap->mm->mmap_sem);
+ spin_lock(&gmap->mm->page_table_lock);
list_for_each_entry_safe(page, next, &gmap->crst_list, lru) {
table = (unsigned long *) page_to_phys(page);
if ((*table & _REGION_ENTRY_TYPE_MASK) == 0)
@@ -230,6 +231,7 @@
gmap_unlink_segment(gmap, table);
__free_pages(page, ALLOC_ORDER);
}
+ spin_unlock(&gmap->mm->page_table_lock);
up_read(&gmap->mm->mmap_sem);
list_del(&gmap->list);
kfree(gmap);
@@ -256,6 +258,9 @@
}
EXPORT_SYMBOL_GPL(gmap_disable);
+/*
+ * gmap_alloc_table is assumed to be called with mmap_sem held
+ */
static int gmap_alloc_table(struct gmap *gmap,
unsigned long *table, unsigned long init)
{
@@ -267,14 +272,12 @@
return -ENOMEM;
new = (unsigned long *) page_to_phys(page);
crst_table_init(new, init);
- down_read(&gmap->mm->mmap_sem);
if (*table & _REGION_ENTRY_INV) {
list_add(&page->lru, &gmap->crst_list);
*table = (unsigned long) new | _REGION_ENTRY_LENGTH |
(*table & _REGION_ENTRY_TYPE_MASK);
} else
__free_pages(page, ALLOC_ORDER);
- up_read(&gmap->mm->mmap_sem);
return 0;
}
@@ -299,6 +302,7 @@
flush = 0;
down_read(&gmap->mm->mmap_sem);
+ spin_lock(&gmap->mm->page_table_lock);
for (off = 0; off < len; off += PMD_SIZE) {
/* Walk the guest addr space page table */
table = gmap->table + (((to + off) >> 53) & 0x7ff);
@@ -320,6 +324,7 @@
*table = _SEGMENT_ENTRY_INV;
}
out:
+ spin_unlock(&gmap->mm->page_table_lock);
up_read(&gmap->mm->mmap_sem);
if (flush)
gmap_flush_tlb(gmap);
@@ -350,6 +355,7 @@
flush = 0;
down_read(&gmap->mm->mmap_sem);
+ spin_lock(&gmap->mm->page_table_lock);
for (off = 0; off < len; off += PMD_SIZE) {
/* Walk the gmap address space page table */
table = gmap->table + (((to + off) >> 53) & 0x7ff);
@@ -373,19 +379,24 @@
flush |= gmap_unlink_segment(gmap, table);
*table = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO | (from + off);
}
+ spin_unlock(&gmap->mm->page_table_lock);
up_read(&gmap->mm->mmap_sem);
if (flush)
gmap_flush_tlb(gmap);
return 0;
out_unmap:
+ spin_unlock(&gmap->mm->page_table_lock);
up_read(&gmap->mm->mmap_sem);
gmap_unmap_segment(gmap, to, len);
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(gmap_map_segment);
-unsigned long gmap_fault(unsigned long address, struct gmap *gmap)
+/*
+ * this function is assumed to be called with mmap_sem held
+ */
+unsigned long __gmap_fault(unsigned long address, struct gmap *gmap)
{
unsigned long *table, vmaddr, segment;
struct mm_struct *mm;
@@ -445,16 +456,75 @@
page = pmd_page(*pmd);
mp = (struct gmap_pgtable *) page->index;
rmap->entry = table;
+ spin_lock(&mm->page_table_lock);
list_add(&rmap->list, &mp->mapper);
+ spin_unlock(&mm->page_table_lock);
/* Set gmap segment table entry to page table. */
*table = pmd_val(*pmd) & PAGE_MASK;
return vmaddr | (address & ~PMD_MASK);
}
return -EFAULT;
+}
+unsigned long gmap_fault(unsigned long address, struct gmap *gmap)
+{
+ unsigned long rc;
+
+ down_read(&gmap->mm->mmap_sem);
+ rc = __gmap_fault(address, gmap);
+ up_read(&gmap->mm->mmap_sem);
+
+ return rc;
}
EXPORT_SYMBOL_GPL(gmap_fault);
+void gmap_discard(unsigned long from, unsigned long to, struct gmap *gmap)
+{
+
+ unsigned long *table, address, size;
+ struct vm_area_struct *vma;
+ struct gmap_pgtable *mp;
+ struct page *page;
+
+ down_read(&gmap->mm->mmap_sem);
+ address = from;
+ while (address < to) {
+ /* Walk the gmap address space page table */
+ table = gmap->table + ((address >> 53) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV)) {
+ address = (address + PMD_SIZE) & PMD_MASK;
+ continue;
+ }
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ table = table + ((address >> 42) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV)) {
+ address = (address + PMD_SIZE) & PMD_MASK;
+ continue;
+ }
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ table = table + ((address >> 31) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV)) {
+ address = (address + PMD_SIZE) & PMD_MASK;
+ continue;
+ }
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ table = table + ((address >> 20) & 0x7ff);
+ if (unlikely(*table & _SEGMENT_ENTRY_INV)) {
+ address = (address + PMD_SIZE) & PMD_MASK;
+ continue;
+ }
+ page = pfn_to_page(*table >> PAGE_SHIFT);
+ mp = (struct gmap_pgtable *) page->index;
+ vma = find_vma(gmap->mm, mp->vmaddr);
+ size = min(to - address, PMD_SIZE - (address & ~PMD_MASK));
+ zap_page_range(vma, mp->vmaddr | (address & ~PMD_MASK),
+ size, NULL);
+ address = (address + PMD_SIZE) & PMD_MASK;
+ }
+ up_read(&gmap->mm->mmap_sem);
+}
+EXPORT_SYMBOL_GPL(gmap_discard);
+
void gmap_unmap_notifier(struct mm_struct *mm, unsigned long *table)
{
struct gmap_rmap *rmap, *next;
@@ -662,8 +732,9 @@
void __tlb_remove_table(void *_table)
{
- void *table = (void *)((unsigned long) _table & PAGE_MASK);
- unsigned type = (unsigned long) _table & ~PAGE_MASK;
+ const unsigned long mask = (FRAG_MASK << 4) | FRAG_MASK;
+ void *table = (void *)((unsigned long) _table & ~mask);
+ unsigned type = (unsigned long) _table & mask;
if (type)
__page_table_free_rcu(table, type);
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 781ff51..4799383 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -335,6 +335,9 @@
ro_start = ((unsigned long)&_stext) & PAGE_MASK;
ro_end = PFN_ALIGN((unsigned long)&_eshared);
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
+ if (memory_chunk[i].type == CHUNK_CRASHK ||
+ memory_chunk[i].type == CHUNK_OLDMEM)
+ continue;
start = memory_chunk[i].addr;
end = memory_chunk[i].addr + memory_chunk[i].size;
if (start >= ro_end || end <= ro_start)
@@ -368,6 +371,9 @@
for (i = 0; i < MEMORY_CHUNKS; i++) {
if (!memory_chunk[i].size)
continue;
+ if (memory_chunk[i].type == CHUNK_CRASHK ||
+ memory_chunk[i].type == CHUNK_OLDMEM)
+ continue;
seg = kzalloc(sizeof(*seg), GFP_KERNEL);
if (!seg)
panic("Out of memory...\n");
diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c
index 4552ce4..f43c0e4 100644
--- a/arch/s390/oprofile/hwsampler.c
+++ b/arch/s390/oprofile/hwsampler.c
@@ -994,7 +994,7 @@
*
* Returns 0 on success, !0 on failure.
*/
-int hwsampler_deallocate()
+int hwsampler_deallocate(void)
{
int rc;
@@ -1035,7 +1035,7 @@
return cb->sample_overflow;
}
-int hwsampler_setup()
+int hwsampler_setup(void)
{
int rc;
int cpu;
@@ -1102,7 +1102,7 @@
return rc;
}
-int hwsampler_shutdown()
+int hwsampler_shutdown(void)
{
int rc;
@@ -1203,7 +1203,7 @@
*
* Returns 0 on success, !0 on failure.
*/
-int hwsampler_stop_all()
+int hwsampler_stop_all(void)
{
int tmp_rc, rc, cpu;
struct hws_cpu_buffer *cb;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ff9177c..5629e20 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -101,10 +101,6 @@
def_bool y
depends on SMP && PREEMPT
-config SYS_SUPPORTS_PM
- bool
- depends on !SMP
-
config ARCH_SUSPEND_POSSIBLE
def_bool n
@@ -649,7 +645,7 @@
a specially reserved region and then later executed after
a crash by kdump/kexec. The crash dump kernel must be compiled
to a memory address not used by the main kernel using
- MEMORY_START.
+ PHYSICAL_START.
For more details see Documentation/kdump/kdump.txt
@@ -660,6 +656,17 @@
Jump between original kernel and kexeced kernel and invoke
code via KEXEC
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
+ default MEMORY_START
+ ---help---
+ This gives the physical address where the kernel is loaded
+ and is ordinarily the same as MEMORY_START.
+
+ Different values are primarily used in the case of kexec on panic
+ where the fail safe kernel needs to run at a different address
+ than the panic-ed kernel.
+
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 99385d0..3fc0f41 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -80,6 +80,7 @@
defaultimage-$(CONFIG_SH_URQUELL) := uImage
defaultimage-$(CONFIG_SH_MIGOR) := uImage
defaultimage-$(CONFIG_SH_AP325RXA) := uImage
+defaultimage-$(CONFIG_SH_SH7757LCR) := uImage
defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
index 9da92ac..b3ae9d3 100644
--- a/arch/sh/boards/board-espt.c
+++ b/arch/sh/boards/board-espt.c
@@ -13,9 +13,9 @@
#include <linux/interrupt.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
+#include <linux/sh_eth.h>
#include <asm/machvec.h>
#include <asm/sizes.h>
-#include <asm/sh_eth.h>
/* NOR Flash */
static struct mtd_partition espt_nor_flash_partitions[] = {
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
index f968f17..03820c3 100644
--- a/arch/sh/boards/board-secureedge5410.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -41,8 +41,7 @@
printk("SnapGear: EraseConfig init\n");
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
- "Erase Config", NULL))
+ if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
irq);
else
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index fa2a208..ec8c84c 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -18,8 +18,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/sh_eth.h>
#include <cpu/sh7757.h>
-#include <asm/sh_eth.h>
#include <asm/heartbeat.h>
static struct resource heartbeat_resource = {
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 311bceb..724e8b7 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -46,13 +46,11 @@
static struct irqaction cayman_action_smsc = {
.name = "Cayman SMSC Mux",
.handler = cayman_interrupt_smsc,
- .flags = IRQF_DISABLED,
};
static struct irqaction cayman_action_pci2 = {
.name = "Cayman PCI2 Mux",
.handler = cayman_interrupt_pci2,
- .flags = IRQF_DISABLED,
};
static void enable_cayman_irq(struct irq_data *data)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index b24d69d..92ddce4b 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -28,13 +28,13 @@
#include <linux/spi/mmc_spi.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/sh_eth.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
#include <media/tw9910.h>
#include <media/mt9t112.h>
#include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
@@ -248,6 +248,10 @@
.driver_param = {
.buswait_bwait = 4,
.detection_delay = 5,
+ .d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
+ .d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
+ .d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
+ .d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
},
};
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index b49535c..865d8d6 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -86,7 +86,7 @@
int ret;
ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
- IRQF_DISABLED, MODNAME, NULL);
+ 0, MODNAME, NULL);
if (unlikely(ret < 0)) {
printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
HP680_BTN_IRQ);
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index d007567..b747c0a 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,12 +23,12 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <linux/sh_eth.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <sound/sh_fsi.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index f3d828f..dd036f1 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -17,8 +17,8 @@
#include <linux/mtd/physmap.h>
#include <linux/fb.h>
#include <linux/io.h>
+#include <linux/sh_eth.h>
#include <mach/sh7763rdp.h>
-#include <asm/sh_eth.h>
#include <asm/sh7760fb.h>
/* NOR Flash */
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index ba515d8..e4ea31a 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -19,6 +19,7 @@
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
CONFIG_ENTRY_OFFSET ?= 0x00001000
+CONFIG_PHYSICAL_START ?= $(CONFIG_MEMORY_START)
suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
@@ -48,7 +49,7 @@
$(Q)$(MAKE) $(build)=$(obj)/romimage $@
KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+ $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
@@ -114,4 +115,5 @@
@echo ' Image $@ is ready'
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y
+ CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
+ KERNEL_MEMORY suffix-y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index af7bb58..be9ca7c 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -170,7 +170,7 @@
{
int ret;
- ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+ ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
"g2 DMA handler", &g2_dma_info);
if (unlikely(ret))
return -EINVAL;
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 3cee58e..706a343 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -70,7 +70,6 @@
static struct irqaction pvr2_dma_irq = {
.name = "pvr2 DMA handler",
.handler = pvr2_dma_interrupt,
- .flags = IRQF_DISABLED,
};
static struct dma_ops pvr2_dma_ops = {
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 8272087..a60da6d 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -95,7 +95,7 @@
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
chan->dev_id, chan);
}
@@ -305,7 +305,7 @@
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
dmae_name[n], (void *)dmae_name[n]);
if (unlikely(i < 0)) {
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 6ab9c4a..3d66a32 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -174,17 +174,17 @@
or = __raw_readl(DMAOR);
__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
- ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI0, dmabrg_irq, 0,
"DMABRG USB address error", NULL);
if (ret)
goto out0;
- ret = request_irq(DMABRGI1, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI1, dmabrg_irq, 0,
"DMABRG Transfer End", NULL);
if (ret)
goto out1;
- ret = request_irq(DMABRGI2, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI2, dmabrg_irq, 0,
"DMABRG Transfer Half", NULL);
if (ret == 0)
return ret;
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 0bf296c..16c1e72 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -107,13 +107,13 @@
u32 uval;
if (request_irq(IRQ_ERR, pcish5_err_irq,
- IRQF_DISABLED, "PCI Error",NULL) < 0) {
+ 0, "PCI Error",NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
return -EINVAL;
}
if (request_irq(IRQ_SERR, pcish5_serr_irq,
- IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+ 0, "PCI SERR interrupt", NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
return -EINVAL;
}
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index edb7cca..fa7b978c 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -172,7 +172,7 @@
PCI_STATUS_SIG_TARGET_ABORT | \
PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
- ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+ ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
"PCI SERR interrupt", hose);
if (unlikely(ret)) {
printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
index afc2455..637b79b 100644
--- a/arch/sh/drivers/push-switch.c
+++ b/arch/sh/drivers/push-switch.c
@@ -63,7 +63,7 @@
BUG_ON(!psw_info);
ret = request_irq(irq, psw_info->irq_handler,
- IRQF_DISABLED | psw_info->irq_flags,
+ psw_info->irq_flags,
psw_info->name ? psw_info->name : DRV_NAME, pdev);
if (unlikely(ret < 0))
goto err;
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 822d608..0dca9a5 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -113,6 +113,16 @@
#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
/*
+ * PHYSICAL_OFFSET is the offset in physical memory where the base
+ * of the kernel is loaded.
+ */
+#ifdef CONFIG_PHYSICAL_START
+#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
+#else
+#define PHYSICAL_OFFSET 0
+#endif
+
+/*
* PAGE_OFFSET is the virtual address of the start of kernel address
* space.
*/
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index 3b097b0..19222da 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -113,7 +113,14 @@
/* MSTP32 clocks */
CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("riic", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP113]),
CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP114]),
@@ -121,6 +128,7 @@
CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP111]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP110]),
+ CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
CLKDEV_CON_ID("usb0", &mstp_clks[MSTP102]),
CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
};
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index de865ca..03f2b55 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -79,7 +79,7 @@
for (i = 0; i < SMP_MSG_NR; i++)
request_irq(104 + i, ipi_interrupt_handler,
- IRQF_DISABLED | IRQF_PERCPU, "IPI", (void *)(long)i);
+ IRQF_PERCPU, "IPI", (void *)(long)i);
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 58bff45..1a0e946 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -211,13 +211,16 @@
}
/*
- * We don't know which RAM region contains kernel data,
- * so we try it repeatedly and let the resource manager
- * test it.
+ * We don't know which RAM region contains kernel data or
+ * the reserved crashkernel region, so try it repeatedly
+ * and let the resource manager test it.
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
+#ifdef CONFIG_KEXEC
+ request_resource(res, &crashk_res);
+#endif
/*
* Also make sure that there is a PMB mapping that covers this
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 38e8628..ecc2d3d 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -11,6 +11,7 @@
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/topology.h>
#include <linux/node.h>
#include <linux/nodemask.h>
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 731c10c..c98905f 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -23,7 +23,7 @@
ENTRY(_start)
SECTIONS
{
- . = PAGE_OFFSET + MEMORY_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
+ . = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
_text = .; /* Text and read-only data */
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 58a93fb3..c9dbace 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -287,6 +287,8 @@
static void __init early_reserve_mem(void)
{
unsigned long start_pfn;
+ u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
+ u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
/*
* Partially used pages are not usable - thus
@@ -300,15 +302,13 @@
* this catches the (definitely buggy) case of us accidentally
* initializing the bootmem allocator with an invalid RAM area.
*/
- memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
- (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
- (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
+ memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
/*
* Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
*/
if (CONFIG_ZERO_PAGE_OFFSET != 0)
- memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+ memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
/*
* Handle additional early reservations
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 6f57325..b8be20d 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -134,7 +134,8 @@
compat_fsid_t f_fsid;
int f_namelen; /* SunOS ignores this field. */
int f_frsize;
- int f_spare[5];
+ int f_flags;
+ int f_spare[4];
};
#define COMPAT_RLIM_INFINITY 0x7fffffff
diff --git a/arch/sparc/kernel/visemul.c b/arch/sparc/kernel/visemul.c
index 32b626c..7337067 100644
--- a/arch/sparc/kernel/visemul.c
+++ b/arch/sparc/kernel/visemul.c
@@ -713,17 +713,17 @@
s16 b = (rs2 >> (i * 16)) & 0xffff;
if (a > b)
- rd_val |= 1 << i;
+ rd_val |= 8 >> i;
}
break;
case FCMPGT32_OPF:
for (i = 0; i < 2; i++) {
- s32 a = (rs1 >> (i * 32)) & 0xffff;
- s32 b = (rs2 >> (i * 32)) & 0xffff;
+ s32 a = (rs1 >> (i * 32)) & 0xffffffff;
+ s32 b = (rs2 >> (i * 32)) & 0xffffffff;
if (a > b)
- rd_val |= 1 << i;
+ rd_val |= 2 >> i;
}
break;
@@ -733,17 +733,17 @@
s16 b = (rs2 >> (i * 16)) & 0xffff;
if (a <= b)
- rd_val |= 1 << i;
+ rd_val |= 8 >> i;
}
break;
case FCMPLE32_OPF:
for (i = 0; i < 2; i++) {
- s32 a = (rs1 >> (i * 32)) & 0xffff;
- s32 b = (rs2 >> (i * 32)) & 0xffff;
+ s32 a = (rs1 >> (i * 32)) & 0xffffffff;
+ s32 b = (rs2 >> (i * 32)) & 0xffffffff;
if (a <= b)
- rd_val |= 1 << i;
+ rd_val |= 2 >> i;
}
break;
@@ -753,17 +753,17 @@
s16 b = (rs2 >> (i * 16)) & 0xffff;
if (a != b)
- rd_val |= 1 << i;
+ rd_val |= 8 >> i;
}
break;
case FCMPNE32_OPF:
for (i = 0; i < 2; i++) {
- s32 a = (rs1 >> (i * 32)) & 0xffff;
- s32 b = (rs2 >> (i * 32)) & 0xffff;
+ s32 a = (rs1 >> (i * 32)) & 0xffffffff;
+ s32 b = (rs2 >> (i * 32)) & 0xffffffff;
if (a != b)
- rd_val |= 1 << i;
+ rd_val |= 2 >> i;
}
break;
@@ -773,17 +773,17 @@
s16 b = (rs2 >> (i * 16)) & 0xffff;
if (a == b)
- rd_val |= 1 << i;
+ rd_val |= 8 >> i;
}
break;
case FCMPEQ32_OPF:
for (i = 0; i < 2; i++) {
- s32 a = (rs1 >> (i * 32)) & 0xffff;
- s32 b = (rs2 >> (i * 32)) & 0xffff;
+ s32 a = (rs1 >> (i * 32)) & 0xffffffff;
+ s32 b = (rs2 >> (i * 32)) & 0xffffffff;
if (a == b)
- rd_val |= 1 << i;
+ rd_val |= 2 >> i;
}
break;
}
diff --git a/arch/sparc/lib/memcpy.S b/arch/sparc/lib/memcpy.S
index 34fe657..4d8c497 100644
--- a/arch/sparc/lib/memcpy.S
+++ b/arch/sparc/lib/memcpy.S
@@ -7,40 +7,12 @@
* Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
-#ifdef __KERNEL__
-
-#define FUNC(x) \
+#define FUNC(x) \
.globl x; \
.type x,@function; \
- .align 4; \
+ .align 4; \
x:
-#undef FASTER_REVERSE
-#undef FASTER_NONALIGNED
-#define FASTER_ALIGNED
-
-/* In kernel these functions don't return a value.
- * One should use macros in asm/string.h for that purpose.
- * We return 0, so that bugs are more apparent.
- */
-#define SETUP_RETL
-#define RETL_INSN clr %o0
-
-#else
-
-/* libc */
-
-#include "DEFS.h"
-
-#define FASTER_REVERSE
-#define FASTER_NONALIGNED
-#define FASTER_ALIGNED
-
-#define SETUP_RETL mov %o0, %g6
-#define RETL_INSN mov %g6, %o0
-
-#endif
-
/* Both these macros have to start with exactly the same insn */
#define MOVE_BIGCHUNK(src, dst, offset, t0, t1, t2, t3, t4, t5, t6, t7) \
ldd [%src + (offset) + 0x00], %t0; \
@@ -164,30 +136,6 @@
.text
.align 4
-#ifdef FASTER_REVERSE
-
-70: /* rdword_align */
-
- andcc %o1, 1, %g0
- be 4f
- andcc %o1, 2, %g0
-
- ldub [%o1 - 1], %g2
- sub %o1, 1, %o1
- stb %g2, [%o0 - 1]
- sub %o2, 1, %o2
- be 3f
- sub %o0, 1, %o0
-4:
- lduh [%o1 - 2], %g2
- sub %o1, 2, %o1
- sth %g2, [%o0 - 2]
- sub %o2, 2, %o2
- b 3f
- sub %o0, 2, %o0
-
-#endif /* FASTER_REVERSE */
-
0:
retl
nop ! Only bcopy returns here and it retuns void...
@@ -198,7 +146,7 @@
#endif
FUNC(memmove)
cmp %o0, %o1
- SETUP_RETL
+ mov %o0, %g7
bleu 9f
sub %o0, %o1, %o4
@@ -207,8 +155,6 @@
bleu 0f
andcc %o4, 3, %o5
-#ifndef FASTER_REVERSE
-
add %o1, %o2, %o1
add %o0, %o2, %o0
sub %o1, 1, %o1
@@ -224,295 +170,7 @@
sub %o0, 1, %o0
retl
- RETL_INSN
-
-#else /* FASTER_REVERSE */
-
- add %o1, %o2, %o1
- add %o0, %o2, %o0
- bne 77f
- cmp %o2, 15
- bleu 91f
- andcc %o1, 3, %g0
- bne 70b
-3:
- andcc %o1, 4, %g0
-
- be 2f
- mov %o2, %g1
-
- ld [%o1 - 4], %o4
- sub %g1, 4, %g1
- st %o4, [%o0 - 4]
- sub %o1, 4, %o1
- sub %o0, 4, %o0
-2:
- andcc %g1, 0xffffff80, %g7
- be 3f
- andcc %o0, 4, %g0
-
- be 74f + 4
-5:
- RMOVE_BIGCHUNK(o1, o0, 0x00, o2, o3, o4, o5, g2, g3, g4, g5)
- RMOVE_BIGCHUNK(o1, o0, 0x20, o2, o3, o4, o5, g2, g3, g4, g5)
- RMOVE_BIGCHUNK(o1, o0, 0x40, o2, o3, o4, o5, g2, g3, g4, g5)
- RMOVE_BIGCHUNK(o1, o0, 0x60, o2, o3, o4, o5, g2, g3, g4, g5)
- subcc %g7, 128, %g7
- sub %o1, 128, %o1
- bne 5b
- sub %o0, 128, %o0
-3:
- andcc %g1, 0x70, %g7
- be 72f
- andcc %g1, 8, %g0
-
- sethi %hi(72f), %o5
- srl %g7, 1, %o4
- add %g7, %o4, %o4
- sub %o1, %g7, %o1
- sub %o5, %o4, %o5
- jmpl %o5 + %lo(72f), %g0
- sub %o0, %g7, %o0
-
-71: /* rmemcpy_table */
- RMOVE_LASTCHUNK(o1, o0, 0x60, g2, g3, g4, g5)
- RMOVE_LASTCHUNK(o1, o0, 0x50, g2, g3, g4, g5)
- RMOVE_LASTCHUNK(o1, o0, 0x40, g2, g3, g4, g5)
- RMOVE_LASTCHUNK(o1, o0, 0x30, g2, g3, g4, g5)
- RMOVE_LASTCHUNK(o1, o0, 0x20, g2, g3, g4, g5)
- RMOVE_LASTCHUNK(o1, o0, 0x10, g2, g3, g4, g5)
- RMOVE_LASTCHUNK(o1, o0, 0x00, g2, g3, g4, g5)
-
-72: /* rmemcpy_table_end */
-
- be 73f
- andcc %g1, 4, %g0
-
- ldd [%o1 - 0x08], %g2
- sub %o0, 8, %o0
- sub %o1, 8, %o1
- st %g2, [%o0]
- st %g3, [%o0 + 0x04]
-
-73: /* rmemcpy_last7 */
-
- be 1f
- andcc %g1, 2, %g0
-
- ld [%o1 - 4], %g2
- sub %o1, 4, %o1
- st %g2, [%o0 - 4]
- sub %o0, 4, %o0
-1:
- be 1f
- andcc %g1, 1, %g0
-
- lduh [%o1 - 2], %g2
- sub %o1, 2, %o1
- sth %g2, [%o0 - 2]
- sub %o0, 2, %o0
-1:
- be 1f
- nop
-
- ldub [%o1 - 1], %g2
- stb %g2, [%o0 - 1]
-1:
- retl
- RETL_INSN
-
-74: /* rldd_std */
- RMOVE_BIGALIGNCHUNK(o1, o0, 0x00, o2, o3, o4, o5, g2, g3, g4, g5)
- RMOVE_BIGALIGNCHUNK(o1, o0, 0x20, o2, o3, o4, o5, g2, g3, g4, g5)
- RMOVE_BIGALIGNCHUNK(o1, o0, 0x40, o2, o3, o4, o5, g2, g3, g4, g5)
- RMOVE_BIGALIGNCHUNK(o1, o0, 0x60, o2, o3, o4, o5, g2, g3, g4, g5)
- subcc %g7, 128, %g7
- sub %o1, 128, %o1
- bne 74b
- sub %o0, 128, %o0
-
- andcc %g1, 0x70, %g7
- be 72b
- andcc %g1, 8, %g0
-
- sethi %hi(72b), %o5
- srl %g7, 1, %o4
- add %g7, %o4, %o4
- sub %o1, %g7, %o1
- sub %o5, %o4, %o5
- jmpl %o5 + %lo(72b), %g0
- sub %o0, %g7, %o0
-
-75: /* rshort_end */
-
- and %o2, 0xe, %o3
-2:
- sethi %hi(76f), %o5
- sll %o3, 3, %o4
- sub %o0, %o3, %o0
- sub %o5, %o4, %o5
- sub %o1, %o3, %o1
- jmpl %o5 + %lo(76f), %g0
- andcc %o2, 1, %g0
-
- RMOVE_SHORTCHUNK(o1, o0, 0x0c, g2, g3)
- RMOVE_SHORTCHUNK(o1, o0, 0x0a, g2, g3)
- RMOVE_SHORTCHUNK(o1, o0, 0x08, g2, g3)
- RMOVE_SHORTCHUNK(o1, o0, 0x06, g2, g3)
- RMOVE_SHORTCHUNK(o1, o0, 0x04, g2, g3)
- RMOVE_SHORTCHUNK(o1, o0, 0x02, g2, g3)
- RMOVE_SHORTCHUNK(o1, o0, 0x00, g2, g3)
-
-76: /* rshort_table_end */
-
- be 1f
- nop
- ldub [%o1 - 1], %g2
- stb %g2, [%o0 - 1]
-1:
- retl
- RETL_INSN
-
-91: /* rshort_aligned_end */
-
- bne 75b
- andcc %o2, 8, %g0
-
- be 1f
- andcc %o2, 4, %g0
-
- ld [%o1 - 0x08], %g2
- ld [%o1 - 0x04], %g3
- sub %o1, 8, %o1
- st %g2, [%o0 - 0x08]
- st %g3, [%o0 - 0x04]
- sub %o0, 8, %o0
-1:
- b 73b
- mov %o2, %g1
-
-77: /* rnon_aligned */
- cmp %o2, 15
- bleu 75b
- andcc %o0, 3, %g0
- be 64f
- andcc %o0, 1, %g0
- be 63f
- andcc %o0, 2, %g0
- ldub [%o1 - 1], %g5
- sub %o1, 1, %o1
- stb %g5, [%o0 - 1]
- sub %o0, 1, %o0
- be 64f
- sub %o2, 1, %o2
-63:
- ldub [%o1 - 1], %g5
- sub %o1, 2, %o1
- stb %g5, [%o0 - 1]
- sub %o0, 2, %o0
- ldub [%o1], %g5
- sub %o2, 2, %o2
- stb %g5, [%o0]
-64:
- and %o1, 3, %g2
- and %o1, -4, %o1
- and %o2, 0xc, %g3
- add %o1, 4, %o1
- cmp %g3, 4
- sll %g2, 3, %g4
- mov 32, %g2
- be 4f
- sub %g2, %g4, %g7
-
- blu 3f
- cmp %g3, 8
-
- be 2f
- srl %o2, 2, %g3
-
- ld [%o1 - 4], %o3
- add %o0, -8, %o0
- ld [%o1 - 8], %o4
- add %o1, -16, %o1
- b 7f
- add %g3, 1, %g3
-2:
- ld [%o1 - 4], %o4
- add %o0, -4, %o0
- ld [%o1 - 8], %g1
- add %o1, -12, %o1
- b 8f
- add %g3, 2, %g3
-3:
- ld [%o1 - 4], %o5
- add %o0, -12, %o0
- ld [%o1 - 8], %o3
- add %o1, -20, %o1
- b 6f
- srl %o2, 2, %g3
-4:
- ld [%o1 - 4], %g1
- srl %o2, 2, %g3
- ld [%o1 - 8], %o5
- add %o1, -24, %o1
- add %o0, -16, %o0
- add %g3, -1, %g3
-
- ld [%o1 + 12], %o3
-5:
- sll %o5, %g4, %g2
- srl %g1, %g7, %g5
- or %g2, %g5, %g2
- st %g2, [%o0 + 12]
-6:
- ld [%o1 + 8], %o4
- sll %o3, %g4, %g2
- srl %o5, %g7, %g5
- or %g2, %g5, %g2
- st %g2, [%o0 + 8]
-7:
- ld [%o1 + 4], %g1
- sll %o4, %g4, %g2
- srl %o3, %g7, %g5
- or %g2, %g5, %g2
- st %g2, [%o0 + 4]
-8:
- ld [%o1], %o5
- sll %g1, %g4, %g2
- srl %o4, %g7, %g5
- addcc %g3, -4, %g3
- or %g2, %g5, %g2
- add %o1, -16, %o1
- st %g2, [%o0]
- add %o0, -16, %o0
- bne,a 5b
- ld [%o1 + 12], %o3
- sll %o5, %g4, %g2
- srl %g1, %g7, %g5
- srl %g4, 3, %g3
- or %g2, %g5, %g2
- add %o1, %g3, %o1
- andcc %o2, 2, %g0
- st %g2, [%o0 + 12]
- be 1f
- andcc %o2, 1, %g0
-
- ldub [%o1 + 15], %g5
- add %o1, -2, %o1
- stb %g5, [%o0 + 11]
- add %o0, -2, %o0
- ldub [%o1 + 16], %g5
- stb %g5, [%o0 + 12]
-1:
- be 1f
- nop
- ldub [%o1 + 15], %g5
- stb %g5, [%o0 + 11]
-1:
- retl
- RETL_INSN
-
-#endif /* FASTER_REVERSE */
+ mov %g7, %o0
/* NOTE: This code is executed just for the cases,
where %src (=%o1) & 3 is != 0.
@@ -546,7 +204,7 @@
FUNC(memcpy) /* %o0=dst %o1=src %o2=len */
sub %o0, %o1, %o4
- SETUP_RETL
+ mov %o0, %g7
9:
andcc %o4, 3, %o5
0:
@@ -569,7 +227,7 @@
add %o1, 4, %o1
add %o0, 4, %o0
2:
- andcc %g1, 0xffffff80, %g7
+ andcc %g1, 0xffffff80, %g0
be 3f
andcc %o0, 4, %g0
@@ -579,22 +237,23 @@
MOVE_BIGCHUNK(o1, o0, 0x20, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGCHUNK(o1, o0, 0x40, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGCHUNK(o1, o0, 0x60, o2, o3, o4, o5, g2, g3, g4, g5)
- subcc %g7, 128, %g7
+ sub %g1, 128, %g1
add %o1, 128, %o1
- bne 5b
+ cmp %g1, 128
+ bge 5b
add %o0, 128, %o0
3:
- andcc %g1, 0x70, %g7
+ andcc %g1, 0x70, %g4
be 80f
andcc %g1, 8, %g0
sethi %hi(80f), %o5
- srl %g7, 1, %o4
- add %g7, %o4, %o4
- add %o1, %g7, %o1
+ srl %g4, 1, %o4
+ add %g4, %o4, %o4
+ add %o1, %g4, %o1
sub %o5, %o4, %o5
jmpl %o5 + %lo(80f), %g0
- add %o0, %g7, %o0
+ add %o0, %g4, %o0
79: /* memcpy_table */
@@ -641,43 +300,28 @@
stb %g2, [%o0]
1:
retl
- RETL_INSN
+ mov %g7, %o0
82: /* ldd_std */
MOVE_BIGALIGNCHUNK(o1, o0, 0x00, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGALIGNCHUNK(o1, o0, 0x20, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGALIGNCHUNK(o1, o0, 0x40, o2, o3, o4, o5, g2, g3, g4, g5)
MOVE_BIGALIGNCHUNK(o1, o0, 0x60, o2, o3, o4, o5, g2, g3, g4, g5)
- subcc %g7, 128, %g7
+ subcc %g1, 128, %g1
add %o1, 128, %o1
- bne 82b
+ cmp %g1, 128
+ bge 82b
add %o0, 128, %o0
-#ifndef FASTER_ALIGNED
-
- andcc %g1, 0x70, %g7
- be 80b
- andcc %g1, 8, %g0
-
- sethi %hi(80b), %o5
- srl %g7, 1, %o4
- add %g7, %o4, %o4
- add %o1, %g7, %o1
- sub %o5, %o4, %o5
- jmpl %o5 + %lo(80b), %g0
- add %o0, %g7, %o0
-
-#else /* FASTER_ALIGNED */
-
- andcc %g1, 0x70, %g7
+ andcc %g1, 0x70, %g4
be 84f
andcc %g1, 8, %g0
sethi %hi(84f), %o5
- add %o1, %g7, %o1
- sub %o5, %g7, %o5
+ add %o1, %g4, %o1
+ sub %o5, %g4, %o5
jmpl %o5 + %lo(84f), %g0
- add %o0, %g7, %o0
+ add %o0, %g4, %o0
83: /* amemcpy_table */
@@ -721,382 +365,132 @@
stb %g2, [%o0]
1:
retl
- RETL_INSN
-
-#endif /* FASTER_ALIGNED */
+ mov %g7, %o0
86: /* non_aligned */
cmp %o2, 6
bleu 88f
+ nop
-#ifdef FASTER_NONALIGNED
-
- cmp %o2, 256
- bcc 87f
-
-#endif /* FASTER_NONALIGNED */
-
- andcc %o0, 3, %g0
+ save %sp, -96, %sp
+ andcc %i0, 3, %g0
be 61f
- andcc %o0, 1, %g0
+ andcc %i0, 1, %g0
be 60f
- andcc %o0, 2, %g0
+ andcc %i0, 2, %g0
- ldub [%o1], %g5
- add %o1, 1, %o1
- stb %g5, [%o0]
- sub %o2, 1, %o2
+ ldub [%i1], %g5
+ add %i1, 1, %i1
+ stb %g5, [%i0]
+ sub %i2, 1, %i2
bne 61f
- add %o0, 1, %o0
+ add %i0, 1, %i0
60:
- ldub [%o1], %g3
- add %o1, 2, %o1
- stb %g3, [%o0]
- sub %o2, 2, %o2
- ldub [%o1 - 1], %g3
- add %o0, 2, %o0
- stb %g3, [%o0 - 1]
+ ldub [%i1], %g3
+ add %i1, 2, %i1
+ stb %g3, [%i0]
+ sub %i2, 2, %i2
+ ldub [%i1 - 1], %g3
+ add %i0, 2, %i0
+ stb %g3, [%i0 - 1]
61:
- and %o1, 3, %g2
- and %o2, 0xc, %g3
- and %o1, -4, %o1
+ and %i1, 3, %g2
+ and %i2, 0xc, %g3
+ and %i1, -4, %i1
cmp %g3, 4
sll %g2, 3, %g4
mov 32, %g2
be 4f
- sub %g2, %g4, %g7
+ sub %g2, %g4, %l0
blu 3f
cmp %g3, 0x8
be 2f
- srl %o2, 2, %g3
+ srl %i2, 2, %g3
- ld [%o1], %o3
- add %o0, -8, %o0
- ld [%o1 + 4], %o4
+ ld [%i1], %i3
+ add %i0, -8, %i0
+ ld [%i1 + 4], %i4
b 8f
add %g3, 1, %g3
2:
- ld [%o1], %o4
- add %o0, -12, %o0
- ld [%o1 + 4], %o5
+ ld [%i1], %i4
+ add %i0, -12, %i0
+ ld [%i1 + 4], %i5
add %g3, 2, %g3
b 9f
- add %o1, -4, %o1
+ add %i1, -4, %i1
3:
- ld [%o1], %g1
- add %o0, -4, %o0
- ld [%o1 + 4], %o3
- srl %o2, 2, %g3
+ ld [%i1], %g1
+ add %i0, -4, %i0
+ ld [%i1 + 4], %i3
+ srl %i2, 2, %g3
b 7f
- add %o1, 4, %o1
+ add %i1, 4, %i1
4:
- ld [%o1], %o5
- cmp %o2, 7
- ld [%o1 + 4], %g1
- srl %o2, 2, %g3
+ ld [%i1], %i5
+ cmp %i2, 7
+ ld [%i1 + 4], %g1
+ srl %i2, 2, %g3
bleu 10f
- add %o1, 8, %o1
+ add %i1, 8, %i1
- ld [%o1], %o3
+ ld [%i1], %i3
add %g3, -1, %g3
5:
- sll %o5, %g4, %g2
- srl %g1, %g7, %g5
+ sll %i5, %g4, %g2
+ srl %g1, %l0, %g5
or %g2, %g5, %g2
- st %g2, [%o0]
+ st %g2, [%i0]
7:
- ld [%o1 + 4], %o4
+ ld [%i1 + 4], %i4
sll %g1, %g4, %g2
- srl %o3, %g7, %g5
+ srl %i3, %l0, %g5
or %g2, %g5, %g2
- st %g2, [%o0 + 4]
+ st %g2, [%i0 + 4]
8:
- ld [%o1 + 8], %o5
- sll %o3, %g4, %g2
- srl %o4, %g7, %g5
+ ld [%i1 + 8], %i5
+ sll %i3, %g4, %g2
+ srl %i4, %l0, %g5
or %g2, %g5, %g2
- st %g2, [%o0 + 8]
+ st %g2, [%i0 + 8]
9:
- ld [%o1 + 12], %g1
- sll %o4, %g4, %g2
- srl %o5, %g7, %g5
+ ld [%i1 + 12], %g1
+ sll %i4, %g4, %g2
+ srl %i5, %l0, %g5
addcc %g3, -4, %g3
or %g2, %g5, %g2
- add %o1, 16, %o1
- st %g2, [%o0 + 12]
- add %o0, 16, %o0
+ add %i1, 16, %i1
+ st %g2, [%i0 + 12]
+ add %i0, 16, %i0
bne,a 5b
- ld [%o1], %o3
+ ld [%i1], %i3
10:
- sll %o5, %g4, %g2
- srl %g1, %g7, %g5
- srl %g7, 3, %g3
+ sll %i5, %g4, %g2
+ srl %g1, %l0, %g5
+ srl %l0, 3, %g3
or %g2, %g5, %g2
- sub %o1, %g3, %o1
- andcc %o2, 2, %g0
- st %g2, [%o0]
+ sub %i1, %g3, %i1
+ andcc %i2, 2, %g0
+ st %g2, [%i0]
be 1f
- andcc %o2, 1, %g0
+ andcc %i2, 1, %g0
- ldub [%o1], %g2
- add %o1, 2, %o1
- stb %g2, [%o0 + 4]
- add %o0, 2, %o0
- ldub [%o1 - 1], %g2
- stb %g2, [%o0 + 3]
+ ldub [%i1], %g2
+ add %i1, 2, %i1
+ stb %g2, [%i0 + 4]
+ add %i0, 2, %i0
+ ldub [%i1 - 1], %g2
+ stb %g2, [%i0 + 3]
1:
be 1f
nop
- ldub [%o1], %g2
- stb %g2, [%o0 + 4]
+ ldub [%i1], %g2
+ stb %g2, [%i0 + 4]
1:
- retl
- RETL_INSN
-
-#ifdef FASTER_NONALIGNED
-
-87: /* faster_nonaligned */
-
- andcc %o1, 3, %g0
- be 3f
- andcc %o1, 1, %g0
-
- be 4f
- andcc %o1, 2, %g0
-
- ldub [%o1], %g2
- add %o1, 1, %o1
- stb %g2, [%o0]
- sub %o2, 1, %o2
- bne 3f
- add %o0, 1, %o0
-4:
- lduh [%o1], %g2
- add %o1, 2, %o1
- srl %g2, 8, %g3
- sub %o2, 2, %o2
- stb %g3, [%o0]
- add %o0, 2, %o0
- stb %g2, [%o0 - 1]
-3:
- andcc %o1, 4, %g0
-
- bne 2f
- cmp %o5, 1
-
- ld [%o1], %o4
- srl %o4, 24, %g2
- stb %g2, [%o0]
- srl %o4, 16, %g3
- stb %g3, [%o0 + 1]
- srl %o4, 8, %g2
- stb %g2, [%o0 + 2]
- sub %o2, 4, %o2
- stb %o4, [%o0 + 3]
- add %o1, 4, %o1
- add %o0, 4, %o0
-2:
- be 33f
- cmp %o5, 2
- be 32f
- sub %o2, 4, %o2
-31:
- ld [%o1], %g2
- add %o1, 4, %o1
- srl %g2, 24, %g3
- and %o0, 7, %g5
- stb %g3, [%o0]
- cmp %g5, 7
- sll %g2, 8, %g1
- add %o0, 4, %o0
- be 41f
- and %o2, 0xffffffc0, %o3
- ld [%o0 - 7], %o4
-4:
- SMOVE_CHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- SMOVE_CHUNK(o1, o0, 0x10, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- SMOVE_CHUNK(o1, o0, 0x20, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- SMOVE_CHUNK(o1, o0, 0x30, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- subcc %o3, 64, %o3
- add %o1, 64, %o1
- bne 4b
- add %o0, 64, %o0
-
- andcc %o2, 0x30, %o3
- be,a 1f
- srl %g1, 16, %g2
-4:
- SMOVE_CHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- subcc %o3, 16, %o3
- add %o1, 16, %o1
- bne 4b
- add %o0, 16, %o0
-
- srl %g1, 16, %g2
-1:
- st %o4, [%o0 - 7]
- sth %g2, [%o0 - 3]
- srl %g1, 8, %g4
- b 88f
- stb %g4, [%o0 - 1]
-32:
- ld [%o1], %g2
- add %o1, 4, %o1
- srl %g2, 16, %g3
- and %o0, 7, %g5
- sth %g3, [%o0]
- cmp %g5, 6
- sll %g2, 16, %g1
- add %o0, 4, %o0
- be 42f
- and %o2, 0xffffffc0, %o3
- ld [%o0 - 6], %o4
-4:
- SMOVE_CHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- SMOVE_CHUNK(o1, o0, 0x10, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- SMOVE_CHUNK(o1, o0, 0x20, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- SMOVE_CHUNK(o1, o0, 0x30, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- subcc %o3, 64, %o3
- add %o1, 64, %o1
- bne 4b
- add %o0, 64, %o0
-
- andcc %o2, 0x30, %o3
- be,a 1f
- srl %g1, 16, %g2
-4:
- SMOVE_CHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- subcc %o3, 16, %o3
- add %o1, 16, %o1
- bne 4b
- add %o0, 16, %o0
-
- srl %g1, 16, %g2
-1:
- st %o4, [%o0 - 6]
- b 88f
- sth %g2, [%o0 - 2]
-33:
- ld [%o1], %g2
- sub %o2, 4, %o2
- srl %g2, 24, %g3
- and %o0, 7, %g5
- stb %g3, [%o0]
- cmp %g5, 5
- srl %g2, 8, %g4
- sll %g2, 24, %g1
- sth %g4, [%o0 + 1]
- add %o1, 4, %o1
- be 43f
- and %o2, 0xffffffc0, %o3
-
- ld [%o0 - 1], %o4
- add %o0, 4, %o0
-4:
- SMOVE_CHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, -1)
- SMOVE_CHUNK(o1, o0, 0x10, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, -1)
- SMOVE_CHUNK(o1, o0, 0x20, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, -1)
- SMOVE_CHUNK(o1, o0, 0x30, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, -1)
- subcc %o3, 64, %o3
- add %o1, 64, %o1
- bne 4b
- add %o0, 64, %o0
-
- andcc %o2, 0x30, %o3
- be,a 1f
- srl %g1, 24, %g2
-4:
- SMOVE_CHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, -1)
- subcc %o3, 16, %o3
- add %o1, 16, %o1
- bne 4b
- add %o0, 16, %o0
-
- srl %g1, 24, %g2
-1:
- st %o4, [%o0 - 5]
- b 88f
- stb %g2, [%o0 - 1]
-41:
- SMOVE_ALIGNCHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- SMOVE_ALIGNCHUNK(o1, o0, 0x10, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- SMOVE_ALIGNCHUNK(o1, o0, 0x20, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- SMOVE_ALIGNCHUNK(o1, o0, 0x30, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- subcc %o3, 64, %o3
- add %o1, 64, %o1
- bne 41b
- add %o0, 64, %o0
-
- andcc %o2, 0x30, %o3
- be,a 1f
- srl %g1, 16, %g2
-4:
- SMOVE_ALIGNCHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 8, 24, -3)
- subcc %o3, 16, %o3
- add %o1, 16, %o1
- bne 4b
- add %o0, 16, %o0
-
- srl %g1, 16, %g2
-1:
- sth %g2, [%o0 - 3]
- srl %g1, 8, %g4
- b 88f
- stb %g4, [%o0 - 1]
-43:
- SMOVE_ALIGNCHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, 3)
- SMOVE_ALIGNCHUNK(o1, o0, 0x10, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, 3)
- SMOVE_ALIGNCHUNK(o1, o0, 0x20, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, 3)
- SMOVE_ALIGNCHUNK(o1, o0, 0x30, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, 3)
- subcc %o3, 64, %o3
- add %o1, 64, %o1
- bne 43b
- add %o0, 64, %o0
-
- andcc %o2, 0x30, %o3
- be,a 1f
- srl %g1, 24, %g2
-4:
- SMOVE_ALIGNCHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 24, 8, 3)
- subcc %o3, 16, %o3
- add %o1, 16, %o1
- bne 4b
- add %o0, 16, %o0
-
- srl %g1, 24, %g2
-1:
- stb %g2, [%o0 + 3]
- b 88f
- add %o0, 4, %o0
-42:
- SMOVE_ALIGNCHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- SMOVE_ALIGNCHUNK(o1, o0, 0x10, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- SMOVE_ALIGNCHUNK(o1, o0, 0x20, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- SMOVE_ALIGNCHUNK(o1, o0, 0x30, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- subcc %o3, 64, %o3
- add %o1, 64, %o1
- bne 42b
- add %o0, 64, %o0
-
- andcc %o2, 0x30, %o3
- be,a 1f
- srl %g1, 16, %g2
-4:
- SMOVE_ALIGNCHUNK(o1, o0, 0x00, g2, g3, g4, g5, o4, o5, g7, g1, 16, 16, -2)
- subcc %o3, 16, %o3
- add %o1, 16, %o1
- bne 4b
- add %o0, 16, %o0
-
- srl %g1, 16, %g2
-1:
- sth %g2, [%o0 - 2]
-
- /* Fall through */
-
-#endif /* FASTER_NONALIGNED */
+ ret
+ restore %g7, %g0, %o0
88: /* short_end */
@@ -1127,7 +521,7 @@
stb %g2, [%o0]
1:
retl
- RETL_INSN
+ mov %g7, %o0
90: /* short_aligned_end */
bne 88b
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index a986b5d..42c55df 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -56,6 +56,8 @@
put_page(head);
return 0;
}
+ if (head != page)
+ get_huge_page_tail(page);
pages[*nr] = page;
(*nr)++;
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 70dabd1..b9d7c42 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -1,5 +1,4 @@
-
-menu "Character Devices"
+menu "UML Character Devices"
config STDERR_CONSOLE
bool "stderr console"
@@ -105,92 +104,6 @@
this if you expect the UML that you build to be run in environments
which don't have a set of /dev/pty* devices.
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- help
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- All modern Linux systems use the Unix98 ptys. Say Y unless
- you're on an embedded system and want to conserve memory.
-
-config LEGACY_PTYS
- bool "Legacy (BSD) PTY support"
- default y
- help
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx
- for masters and /dev/ttyxx for slaves of pseudo
- terminals. This scheme has a number of problems, including
- security. This option enables these legacy devices; on most
- systems, it is safe to say N.
-
-config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN)"
- depends on BLOCK
- help
- The raw driver permits block devices to be bound to /dev/raw/rawN.
- Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
- See the raw(8) manpage for more details.
-
- Applications should preferably open the device (eg /dev/hda1)
- with the O_DIRECT flag.
-
-config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-8192)"
- depends on RAW_DRIVER
- default "256"
- help
- The maximum number of RAW devices that are supported.
- Default is 256. Increase this number in case you need lots of
- raw devices.
-
-config LEGACY_PTY_COUNT
- int "Maximum number of legacy PTY in use"
- depends on LEGACY_PTYS
- default "256"
- help
- The maximum number of legacy PTYs that can be used at any one time.
- The default is 256, and should be more than enough. Embedded
- systems may want to reduce this to save memory.
-
- When not in use, each legacy PTY occupies 12 bytes on 32-bit
- architectures and 24 bytes on 64-bit architectures.
-
-config WATCHDOG
- bool "Watchdog Timer Support"
-
-config WATCHDOG_NOWAYOUT
- bool "Disable watchdog shutdown on close"
- depends on WATCHDOG
-
-config SOFT_WATCHDOG
- tristate "Software Watchdog"
- depends on WATCHDOG
-
-config UML_WATCHDOG
- tristate "UML watchdog"
- depends on WATCHDOG
-
config UML_SOUND
tristate "Sound support"
help
@@ -211,29 +124,4 @@
tristate
default UML_SOUND
-#It is selected elsewhere, so kconfig would warn without this.
-config HW_RANDOM
- tristate
- default n
-
-config UML_RANDOM
- tristate "Hardware random number generator"
- help
- This option enables UML's "hardware" random number generator. It
- attaches itself to the host's /dev/random, supplying as much entropy
- as the host has, rather than the small amount the UML gets from its
- own drivers. It registers itself as a standard hardware random number
- generator, major 10, minor 183, and the canonical device name is
- /dev/hwrng.
- The way to make use of this is to install the rng-tools package
- (check your distro, or download from
- http://sourceforge.net/projects/gkernel/). rngd periodically reads
- /dev/hwrng and injects the entropy into /dev/random.
-
-config MMAPPER
- tristate "iomem emulation driver"
- help
- This driver allows a host file to be used as emulated IO memory inside
- UML.
-
endmenu
diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
index 0ccad0ff6..567eb5f 100644
--- a/arch/um/Kconfig.rest
+++ b/arch/um/Kconfig.rest
@@ -2,20 +2,14 @@
source "kernel/Kconfig.freezer"
-source "drivers/block/Kconfig"
-
source "arch/um/Kconfig.char"
-source "drivers/base/Kconfig"
+source "drivers/Kconfig"
source "net/Kconfig"
source "arch/um/Kconfig.net"
-source "drivers/net/Kconfig"
-
-source "drivers/connector/Kconfig"
-
source "fs/Kconfig"
source "security/Kconfig"
@@ -24,19 +18,4 @@
source "lib/Kconfig"
-source "drivers/scsi/Kconfig"
-
-source "drivers/md/Kconfig"
-
-if BROKEN
- source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/leds/Kconfig"
-
-#This is just to shut up some Kconfig warnings, so no prompt.
-config INPUT
- tristate
- default n
-
source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index b5e675e3..70fd690 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -148,5 +148,11 @@
be 1 << order pages. The default is OK unless you're running Valgrind
on UML, in which case, set this to 3.
+config MMAPPER
+ tristate "iomem emulation driver"
+ help
+ This driver allows a host file to be used as emulated IO memory inside
+ UML.
+
config NO_DMA
def_bool y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index c0f712c..7730af6 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -20,15 +20,27 @@
MODE_INCLUDE += -I$(srctree)/$(ARCH_DIR)/include/shared/skas
+HEADER_ARCH := $(SUBARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(SUBARCH),i386)
+ HEADER_ARCH := x86
+endif
+ifeq ($(SUBARCH),x86_64)
+ HEADER_ARCH := x86
+endif
+
+HOST_DIR := arch/$(HEADER_ARCH)
+
include $(srctree)/$(ARCH_DIR)/Makefile-skas
+include $(srctree)/$(HOST_DIR)/Makefile.um
+
+core-y += $(HOST_DIR)/um/
SHARED_HEADERS := $(ARCH_DIR)/include/shared
ARCH_INCLUDE := -I$(srctree)/$(SHARED_HEADERS)
-ARCH_INCLUDE += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)/shared
-ifneq ($(KBUILD_SRC),)
-ARCH_INCLUDE += -I$(SHARED_HEADERS)
-endif
-KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
+ARCH_INCLUDE += -I$(srctree)/$(HOST_DIR)/um/shared
+KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/um
# -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
# named - it's a common symbol in libpcap, so we get a binary which crashes.
@@ -47,14 +59,12 @@
USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -D__KERNEL__,,\
$(patsubst -I%,,$(KBUILD_CFLAGS)))) $(ARCH_INCLUDE) $(MODE_INCLUDE) \
- $(filter -I%,$(CFLAGS)) -D_FILE_OFFSET_BITS=64
-
-include $(srctree)/$(ARCH_DIR)/Makefile-$(SUBARCH)
+ $(filter -I%,$(CFLAGS)) -D_FILE_OFFSET_BITS=64 -idirafter include
#This will adjust *FLAGS accordingly to the platform.
include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
-KBUILD_CPPFLAGS += -I$(srctree)/arch/$(HEADER_ARCH)/include
+KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include
# -Derrno=kernel_errno - This turns all kernel references to errno into
# kernel_errno to separate them from the libc errno. This allows -fno-common
@@ -84,10 +94,9 @@
echo ' find in the kernel root.'
endef
-KBUILD_KCONFIG := arch/um/Kconfig.$(HEADER_ARCH)
+KBUILD_KCONFIG := $(HOST_DIR)/um/Kconfig
-archprepare: $(SHARED_HEADERS)/user_constants.h
-archprepare: $(SHARED_HEADERS)/kern_constants.h
+archprepare: include/generated/user_constants.h
LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
@@ -118,9 +127,7 @@
# When cleaning we don't include .config, so we don't include
# TT or skas makefiles and don't clean skas_ptregs.h.
-CLEAN_FILES += linux x.i gmon.out \
- $(SHARED_HEADERS)/user_constants.h \
- $(SHARED_HEADERS)/kern_constants.h
+CLEAN_FILES += linux x.i gmon.out
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
@@ -128,8 +135,8 @@
# Generated files
-$(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s: FORCE
- $(Q)$(MAKE) $(build)=$(ARCH_DIR)/sys-$(SUBARCH) $@
+$(HOST_DIR)/um/user-offsets.s: FORCE
+ $(Q)$(MAKE) $(build)=$(HOST_DIR)/um $@
define filechk_gen-asm-offsets
(set -e; \
@@ -144,11 +151,7 @@
echo ""; )
endef
-$(SHARED_HEADERS)/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
+include/generated/user_constants.h: $(HOST_DIR)/um/user-offsets.s
$(call filechk,gen-asm-offsets)
-$(SHARED_HEADERS)/kern_constants.h:
- $(Q)mkdir -p $(dir $@)
- $(Q)echo '#include "../../../../include/generated/asm-offsets.h"' >$@
-
-export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH DEV_NULL_PATH
+export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS DEV_NULL_PATH
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
deleted file mode 100644
index 302cbe5..0000000
--- a/arch/um/Makefile-i386
+++ /dev/null
@@ -1,42 +0,0 @@
-core-y += arch/um/sys-i386/ arch/x86/crypto/
-
-TOP_ADDR := $(CONFIG_TOP_ADDR)
-
-START := 0x8048000
-
-LDFLAGS += -m elf_i386
-ELF_ARCH := $(SUBARCH)
-ELF_FORMAT := elf32-$(SUBARCH)
-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-HEADER_ARCH := x86
-CHECKFLAGS += -D__i386__
-
-ifeq ("$(origin SUBARCH)", "command line")
-ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)")
-KBUILD_CFLAGS += $(call cc-option,-m32)
-KBUILD_AFLAGS += $(call cc-option,-m32)
-LINK-y += $(call cc-option,-m32)
-UML_OBJCOPYFLAGS += -F $(ELF_FORMAT)
-
-export LDFLAGS HOSTCFLAGS HOSTLDFLAGS UML_OBJCOPYFLAGS
-endif
-endif
-
-# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
-include $(srctree)/arch/x86/Makefile_32.cpu
-
-# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
-cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
-
-# Prevent sprintf in nfsd from being converted to strcpy and resulting in
-# an unresolved reference.
-cflags-y += -ffreestanding
-
-# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
-# a lot more stack due to the lack of sharing of stacklots. Also, gcc
-# 4.3.0 needs -funit-at-a-time for extern inline functions.
-KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
- echo $(call cc-option,-fno-unit-at-a-time); \
- else echo $(call cc-option,-funit-at-a-time); fi ;)
-
-KBUILD_CFLAGS += $(cflags-y)
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
deleted file mode 100644
index a9cd7e7..0000000
--- a/arch/um/Makefile-x86_64
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright 2003 - 2004 Pathscale, Inc
-# Released under the GPL
-
-core-y += arch/um/sys-x86_64/ arch/x86/crypto/
-START := 0x60000000
-
-_extra_flags_ = -fno-builtin -m64
-
-KBUILD_CFLAGS += $(_extra_flags_)
-
-CHECKFLAGS += -m64 -D__x86_64__
-KBUILD_AFLAGS += -m64
-LDFLAGS += -m elf_x86_64
-KBUILD_CPPFLAGS += -m64
-
-ELF_ARCH := i386:x86-64
-ELF_FORMAT := elf64-x86-64
-HEADER_ARCH := x86
-
-# Not on all 64-bit distros /lib is a symlink to /lib64. PLD is an example.
-
-LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64
-LINK-y += -m64
-
-# Do unit-at-a-time unconditionally on x86_64, following the host
-KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
diff --git a/arch/um/drivers/chan.h b/arch/um/drivers/chan.h
new file mode 100644
index 0000000..8df0fd90
--- /dev/null
+++ b/arch/um/drivers/chan.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __CHAN_KERN_H__
+#define __CHAN_KERN_H__
+
+#include <linux/tty.h>
+#include <linux/list.h>
+#include <linux/console.h>
+#include "chan_user.h"
+#include "line.h"
+
+struct chan {
+ struct list_head list;
+ struct list_head free_list;
+ struct line *line;
+ char *dev;
+ unsigned int primary:1;
+ unsigned int input:1;
+ unsigned int output:1;
+ unsigned int opened:1;
+ unsigned int enabled:1;
+ int fd;
+ const struct chan_ops *ops;
+ void *data;
+};
+
+extern void chan_interrupt(struct list_head *chans, struct delayed_work *task,
+ struct tty_struct *tty, int irq);
+extern int parse_chan_pair(char *str, struct line *line, int device,
+ const struct chan_opts *opts, char **error_out);
+extern int write_chan(struct list_head *chans, const char *buf, int len,
+ int write_irq);
+extern int console_write_chan(struct list_head *chans, const char *buf,
+ int len);
+extern int console_open_chan(struct line *line, struct console *co);
+extern void deactivate_chan(struct list_head *chans, int irq);
+extern void reactivate_chan(struct list_head *chans, int irq);
+extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty);
+extern int enable_chan(struct line *line);
+extern void close_chan(struct list_head *chans, int delay_free_irq);
+extern int chan_window_size(struct list_head *chans,
+ unsigned short *rows_out,
+ unsigned short *cols_out);
+extern int chan_config_string(struct list_head *chans, char *str, int size,
+ char **error_out);
+
+#endif
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index d4191fe..420e2c8 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -6,7 +6,7 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include "chan_kern.h"
+#include "chan.h"
#include "os.h"
#ifdef CONFIG_NOCONFIG_CHAN
@@ -358,11 +358,11 @@
return 0;
}
-static void free_one_chan(struct chan *chan, int delay_free_irq)
+static void free_one_chan(struct chan *chan)
{
list_del(&chan->list);
- close_one_chan(chan, delay_free_irq);
+ close_one_chan(chan, 0);
if (chan->ops->free != NULL)
(*chan->ops->free)(chan->data);
@@ -372,14 +372,14 @@
kfree(chan);
}
-static void free_chan(struct list_head *chans, int delay_free_irq)
+static void free_chan(struct list_head *chans)
{
struct list_head *ele, *next;
struct chan *chan;
list_for_each_safe(ele, next, chans) {
chan = list_entry(ele, struct chan, list);
- free_one_chan(chan, delay_free_irq);
+ free_one_chan(chan);
}
}
@@ -547,7 +547,7 @@
char *in, *out;
if (!list_empty(chans)) {
- free_chan(chans, 0);
+ free_chan(chans);
INIT_LIST_HEAD(chans);
}
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index cfeb3f4..f180813 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -11,10 +11,8 @@
#include <termios.h>
#include <sys/ioctl.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
void generic_close(int fd, void *unused)
{
@@ -283,7 +281,12 @@
return;
pid = tcgetpgrp(fd);
- if (!is_skas_winch(pid, fd, tty) && (pid == -1)) {
+ if (is_skas_winch(pid, fd, tty)) {
+ register_winch_irq(-1, fd, -1, tty, 0);
+ return;
+ }
+
+ if (pid == -1) {
thread = winch_tramp(fd, tty, &thread_fd, &stack);
if (thread < 0)
return;
diff --git a/arch/um/include/shared/chan_user.h b/arch/um/drivers/chan_user.h
similarity index 100%
rename from arch/um/include/shared/chan_user.h
rename to arch/um/drivers/chan_user.h
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index f5701fd..7f2ed0b 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -3,7 +3,6 @@
#include "kern_util.h"
#include "os.h"
-#include "user.h"
#include "um_malloc.h"
static inline void *cow_malloc(int size)
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index f8e85e0..a4fd7bc 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -17,7 +17,6 @@
#include "net_user.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
enum request_type { REQ_NEW_CONTROL };
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index f5a981a..5b81d25 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -9,10 +9,8 @@
#include <errno.h>
#include <termios.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct fd_chan {
int fd;
diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c
index 84dce3f..0345d62 100644
--- a/arch/um/drivers/harddog_user.c
+++ b/arch/um/drivers/harddog_user.c
@@ -7,7 +7,6 @@
#include <unistd.h>
#include <errno.h>
#include "os.h"
-#include "user.h"
struct dog_data {
int stdin;
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 364c8a1..c1cf220 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -7,7 +7,7 @@
#include "linux/kd.h"
#include "linux/sched.h"
#include "linux/slab.h"
-#include "chan_kern.h"
+#include "chan.h"
#include "irq_kern.h"
#include "irq_user.h"
#include "kern_util.h"
diff --git a/arch/um/include/shared/line.h b/arch/um/drivers/line.h
similarity index 100%
rename from arch/um/include/shared/line.h
rename to arch/um/drivers/line.h
diff --git a/arch/um/include/shared/mconsole.h b/arch/um/drivers/mconsole.h
similarity index 100%
rename from arch/um/include/shared/mconsole.h
rename to arch/um/drivers/mconsole.h
diff --git a/arch/um/include/shared/mconsole_kern.h b/arch/um/drivers/mconsole_kern.h
similarity index 100%
rename from arch/um/include/shared/mconsole_kern.h
rename to arch/um/drivers/mconsole_kern.h
diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c
index f8cf4c8..9920982 100644
--- a/arch/um/drivers/mconsole_user.c
+++ b/arch/um/drivers/mconsole_user.c
@@ -10,9 +10,7 @@
#include <sys/socket.h>
#include <sys/uio.h>
#include <sys/un.h>
-#include "kern_constants.h"
#include "mconsole.h"
-#include "user.h"
static struct mconsole_command commands[] = {
/*
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index 5201188..05090c3 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -12,10 +12,8 @@
#include <sys/socket.h>
#include <sys/wait.h>
#include "net_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
int tap_open_common(void *dev, char *gate_addr)
{
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index 5f90358..702a75b 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -9,9 +9,7 @@
#include <asm/types.h>
#include "net_user.h"
#include "pcap_user.h"
-#include "kern_constants.h"
#include "um_malloc.h"
-#include "user.h"
#define PCAP_FD(p) (*(int *)(p))
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index b49bf56..7b010b7 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -10,11 +10,9 @@
#include <unistd.h>
#include <netinet/in.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "port.h"
#include "um_malloc.h"
-#include "user.h"
struct port_chan {
int raw;
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 1113911..cff2b75 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -12,10 +12,8 @@
#include <termios.h>
#include <sys/stat.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct pty_chan {
void (*announce)(char *dev_name, int dev);
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index cbacfc4e..932b4d6 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -11,12 +11,10 @@
#include <string.h>
#include <sys/termios.h>
#include <sys/wait.h>
-#include "kern_constants.h"
#include "net_user.h"
#include "os.h"
#include "slip.h"
#include "um_malloc.h"
-#include "user.h"
static int slip_user_init(void *data, void *dev)
{
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index a0ada8f..db4adb6 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -7,11 +7,9 @@
#include <errno.h>
#include <string.h>
#include <sys/wait.h>
-#include "kern_constants.h"
#include "net_user.h"
#include "os.h"
#include "slirp.h"
-#include "user.h"
static int slirp_user_init(void *data, void *dev)
{
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index f1786e6..9d8c20a 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -12,10 +12,8 @@
#include "linux/console.h"
#include "asm/termbits.h"
#include "asm/irq.h"
-#include "line.h"
#include "ssl.h"
-#include "chan_kern.h"
-#include "kern.h"
+#include "chan.h"
#include "init.h"
#include "irq_user.h"
#include "mconsole_kern.h"
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 49266f6..088776f 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -20,8 +20,7 @@
#include "asm/current.h"
#include "asm/irq.h"
#include "stdio_console.h"
-#include "line.h"
-#include "chan_kern.h"
+#include "chan.h"
#include "irq_user.h"
#include "mconsole_kern.h"
#include "init.h"
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index 495858a..a97391f 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -7,10 +7,8 @@
#include <fcntl.h>
#include <termios.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct tty_chan {
char *dev;
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 620f5b7..944453a 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -46,7 +46,6 @@
#include "asm/tlbflush.h"
#include "mem_user.h"
#include "kern_util.h"
-#include "kern.h"
#include "mconsole_kern.h"
#include "init.h"
#include "irq_user.h"
@@ -54,7 +53,6 @@
#include "ubd_user.h"
#include "os.h"
#include "mem.h"
-#include "mem_kern.h"
#include "cow.h"
enum ubd_req { UBD_READ, UBD_WRITE };
@@ -513,8 +511,37 @@
static inline int ubd_file_size(struct ubd *ubd_dev, __u64 *size_out)
{
char *file;
+ int fd;
+ int err;
- file = ubd_dev->cow.file ? ubd_dev->cow.file : ubd_dev->file;
+ __u32 version;
+ __u32 align;
+ char *backing_file;
+ time_t mtime;
+ unsigned long long size;
+ int sector_size;
+ int bitmap_offset;
+
+ if (ubd_dev->file && ubd_dev->cow.file) {
+ file = ubd_dev->cow.file;
+
+ goto out;
+ }
+
+ fd = os_open_file(ubd_dev->file, global_openflags, 0);
+ if (fd < 0)
+ return fd;
+
+ err = read_cow_header(file_reader, &fd, &version, &backing_file, \
+ &mtime, &size, §or_size, &align, &bitmap_offset);
+ os_close_file(fd);
+
+ if(err == -EINVAL)
+ file = ubd_dev->file;
+ else
+ file = backing_file;
+
+out:
return os_file_size(file, size_out);
}
diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c
index b591bb9..007b94d 100644
--- a/arch/um/drivers/ubd_user.c
+++ b/arch/um/drivers/ubd_user.c
@@ -16,7 +16,6 @@
#include <sys/mman.h>
#include <sys/param.h>
#include "asm/types.h"
-#include "user.h"
#include "ubd_user.h"
#include "os.h"
#include "cow.h"
diff --git a/arch/um/include/shared/ubd_user.h b/arch/um/drivers/ubd_user.h
similarity index 100%
rename from arch/um/include/shared/ubd_user.h
rename to arch/um/drivers/ubd_user.h
diff --git a/arch/um/drivers/umcast_user.c b/arch/um/drivers/umcast_user.c
index 59c56fd..010fa2d 100644
--- a/arch/um/drivers/umcast_user.c
+++ b/arch/um/drivers/umcast_user.c
@@ -15,11 +15,9 @@
#include <unistd.h>
#include <errno.h>
#include <netinet/in.h>
-#include "kern_constants.h"
#include "umcast.h"
#include "net_user.h"
#include "um_malloc.h"
-#include "user.h"
static struct sockaddr_in *new_addr(char *addr, unsigned short port)
{
diff --git a/arch/um/drivers/vde_user.c b/arch/um/drivers/vde_user.c
index c5c4325..b8c2867 100644
--- a/arch/um/drivers/vde_user.c
+++ b/arch/um/drivers/vde_user.c
@@ -6,10 +6,8 @@
#include <stddef.h>
#include <errno.h>
#include <libvdeplug.h>
-#include "kern_constants.h"
#include "net_user.h"
#include "um_malloc.h"
-#include "user.h"
#include "vde.h"
static int vde_user_init(void *data, void *dev)
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 2e1de57..969110e 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -11,10 +11,8 @@
#include <string.h>
#include <termios.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
#include "xterm.h"
struct xterm_chan {
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
new file mode 100644
index 0000000..451f451
--- /dev/null
+++ b/arch/um/include/asm/Kbuild
@@ -0,0 +1,3 @@
+generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h
+generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h
+generic-y += ftrace.h
diff --git a/arch/um/include/asm/bug.h b/arch/um/include/asm/bug.h
deleted file mode 100644
index 9e33b86..0000000
--- a/arch/um/include/asm/bug.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_BUG_H
-#define __UM_BUG_H
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/arch/um/include/asm/checksum.h b/arch/um/include/asm/checksum.h
deleted file mode 100644
index 5b50136..0000000
--- a/arch/um/include/asm/checksum.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_CHECKSUM_H
-#define __UM_CHECKSUM_H
-
-#include "sysdep/checksum.h"
-
-#endif
diff --git a/arch/um/include/asm/cputime.h b/arch/um/include/asm/cputime.h
deleted file mode 100644
index c84acba..0000000
--- a/arch/um/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_CPUTIME_H
-#define __UM_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __UM_CPUTIME_H */
diff --git a/arch/um/include/asm/device.h b/arch/um/include/asm/device.h
deleted file mode 100644
index d8f9872..0000000
--- a/arch/um/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/um/include/asm/emergency-restart.h b/arch/um/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/arch/um/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/um/include/asm/futex.h b/arch/um/include/asm/futex.h
deleted file mode 100644
index 6a332a9..0000000
--- a/arch/um/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/um/include/asm/hardirq.h b/arch/um/include/asm/hardirq.h
deleted file mode 100644
index fb3c05a..0000000
--- a/arch/um/include/asm/hardirq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/hardirq.h>
diff --git a/arch/um/include/asm/hw_irq.h b/arch/um/include/asm/hw_irq.h
deleted file mode 100644
index 1cf84cf..0000000
--- a/arch/um/include/asm/hw_irq.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ASM_UM_HW_IRQ_H
-#define _ASM_UM_HW_IRQ_H
-
-#include "asm/irq.h"
-#include "asm/archparam.h"
-
-#endif
diff --git a/arch/um/include/asm/irq_regs.h b/arch/um/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/arch/um/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/um/include/asm/irqflags.h b/arch/um/include/asm/irqflags.h
index 659b9ab..c780d8a 100644
--- a/arch/um/include/asm/irqflags.h
+++ b/arch/um/include/asm/irqflags.h
@@ -1,6 +1,42 @@
#ifndef __UM_IRQFLAGS_H
#define __UM_IRQFLAGS_H
-/* Empty for now */
+extern int get_signals(void);
+extern int set_signals(int enable);
+extern void block_signals(void);
+extern void unblock_signals(void);
+
+static inline unsigned long arch_local_save_flags(void)
+{
+ return get_signals();
+}
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+ set_signals(flags);
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ unblock_signals();
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ block_signals();
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+ flags = arch_local_save_flags();
+ arch_local_irq_disable();
+ return flags;
+}
+
+static inline bool arch_irqs_disabled(void)
+{
+ return arch_local_save_flags() == 0;
+}
#endif
diff --git a/arch/um/include/asm/kdebug.h b/arch/um/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b0..0000000
--- a/arch/um/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/um/include/asm/mmu.h b/arch/um/include/asm/mmu.h
index cf259de..30509b9 100644
--- a/arch/um/include/asm/mmu.h
+++ b/arch/um/include/asm/mmu.h
@@ -1,12 +1,24 @@
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#ifndef __MMU_H
-#define __MMU_H
+#ifndef __ARCH_UM_MMU_H
+#define __ARCH_UM_MMU_H
-#include "um_mmu.h"
+#include "mm_id.h"
+#include <asm/mm_context.h>
+
+typedef struct mm_context {
+ struct mm_id id;
+ struct uml_arch_mm_context arch;
+ struct page **stub_pages;
+} mm_context_t;
+
+extern void __switch_mm(struct mm_id * mm_idp);
+
+/* Avoid tangled inclusion with asm/ldt.h */
+extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
+extern void free_ldt(struct mm_context *mm);
#endif
-
diff --git a/arch/um/include/asm/mmu_context.h b/arch/um/include/asm/mmu_context.h
index 34d8130..591b3d8 100644
--- a/arch/um/include/asm/mmu_context.h
+++ b/arch/um/include/asm/mmu_context.h
@@ -6,15 +6,12 @@
#ifndef __UM_MMU_CONTEXT_H
#define __UM_MMU_CONTEXT_H
-#include "linux/sched.h"
-#include "um_mmu.h"
+#include <linux/sched.h>
+#include <asm/mmu.h>
extern void arch_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
extern void arch_exit_mmap(struct mm_struct *mm);
-#define get_mmu_context(task) do ; while(0)
-#define activate_context(tsk) do ; while(0)
-
#define deactivate_mm(tsk,mm) do { } while (0)
extern void force_flush_all(void);
diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h
index 4cc9b6c..7cfc3ce 100644
--- a/arch/um/include/asm/page.h
+++ b/arch/um/include/asm/page.h
@@ -19,7 +19,7 @@
struct page;
#include <linux/types.h>
-#include <sysdep/vm-flags.h>
+#include <asm/vm-flags.h>
/*
* These are used to make use of C type-checking..
diff --git a/arch/um/include/asm/page_offset.h b/arch/um/include/asm/page_offset.h
deleted file mode 100644
index 1c168df..0000000
--- a/arch/um/include/asm/page_offset.h
+++ /dev/null
@@ -1 +0,0 @@
-#define PAGE_OFFSET_RAW (uml_physmem)
diff --git a/arch/um/include/asm/pda.h b/arch/um/include/asm/pda.h
deleted file mode 100644
index ddcd774..0000000
--- a/arch/um/include/asm/pda.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_PDA_X86_64_H
-#define __UM_PDA_X86_64_H
-
-/* XXX */
-struct foo {
- unsigned int __softirq_pending;
- unsigned int __nmi_count;
-};
-
-extern struct foo me;
-
-#define read_pda(me) (&me)
-
-#endif
-
diff --git a/arch/um/include/asm/percpu.h b/arch/um/include/asm/percpu.h
deleted file mode 100644
index efe7508..0000000
--- a/arch/um/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_PERCPU_H
-#define __UM_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __UM_PERCPU_H */
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 1a7d275..f605d3c 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -23,17 +23,10 @@
#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
-#define PT_REG(r, reg) UPT_REG(&(r)->regs, reg)
-#define PT_REGS_SET(r, reg, val) UPT_SET(&(r)->regs, reg, val)
-
-#define PT_REGS_SET_SYSCALL_RETURN(r, res) \
- UPT_SET_SYSCALL_RETURN(&(r)->regs, res)
#define PT_REGS_RESTART_SYSCALL(r) UPT_RESTART_SYSCALL(&(r)->regs)
#define PT_REGS_SYSCALL_NR(r) UPT_SYSCALL_NR(&(r)->regs)
-#define PT_REGS_SC(r) UPT_SC(&(r)->regs)
-
#define instruction_pointer(regs) PT_REGS_IP(regs)
struct task_struct;
diff --git a/arch/um/include/asm/sections.h b/arch/um/include/asm/sections.h
deleted file mode 100644
index 6b0231e..0000000
--- a/arch/um/include/asm/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _UM_SECTIONS_H
-#define _UM_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/um/include/asm/system.h b/arch/um/include/asm/system.h
deleted file mode 100644
index 68a90ec..0000000
--- a/arch/um/include/asm/system.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __UM_SYSTEM_GENERIC_H
-#define __UM_SYSTEM_GENERIC_H
-
-#include "sysdep/system.h"
-
-extern int get_signals(void);
-extern int set_signals(int enable);
-extern void block_signals(void);
-extern void unblock_signals(void);
-
-static inline unsigned long arch_local_save_flags(void)
-{
- return get_signals();
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
- set_signals(flags);
-}
-
-static inline void arch_local_irq_enable(void)
-{
- unblock_signals();
-}
-
-static inline void arch_local_irq_disable(void)
-{
- block_signals();
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
- unsigned long flags;
- flags = arch_local_save_flags();
- arch_local_irq_disable();
- return flags;
-}
-
-static inline bool arch_irqs_disabled(void)
-{
- return arch_local_save_flags() == 0;
-}
-
-extern void *_switch_to(void *prev, void *next, void *last);
-#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
-
-#endif
diff --git a/arch/um/include/asm/topology.h b/arch/um/include/asm/topology.h
deleted file mode 100644
index 0905e4f..0000000
--- a/arch/um/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_UM_TOPOLOGY_H
-#define _ASM_UM_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif
diff --git a/arch/um/include/asm/uaccess.h b/arch/um/include/asm/uaccess.h
index b9a895d..3f22fbf 100644
--- a/arch/um/include/asm/uaccess.h
+++ b/arch/um/include/asm/uaccess.h
@@ -6,15 +6,15 @@
#ifndef __UM_UACCESS_H
#define __UM_UACCESS_H
-#include <asm/errno.h>
-#include <asm/processor.h>
-
/* thread_info has a mm_segment_t in it, so put the definition up here */
typedef struct {
unsigned long seg;
} mm_segment_t;
-#include "linux/thread_info.h"
+#include <linux/thread_info.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <asm/elf.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -38,7 +38,86 @@
#define segment_eq(a, b) ((a).seg == (b).seg)
-#include "um_uaccess.h"
+#define __under_task_size(addr, size) \
+ (((unsigned long) (addr) < TASK_SIZE) && \
+ (((unsigned long) (addr) + (size)) < TASK_SIZE))
+
+#define __access_ok_vsyscall(type, addr, size) \
+ ((type == VERIFY_READ) && \
+ ((unsigned long) (addr) >= FIXADDR_USER_START) && \
+ ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
+ ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))
+
+#define __addr_range_nowrap(addr, size) \
+ ((unsigned long) (addr) <= ((unsigned long) (addr) + (size)))
+
+#define access_ok(type, addr, size) \
+ (__addr_range_nowrap(addr, size) && \
+ (__under_task_size(addr, size) || \
+ __access_ok_vsyscall(type, addr, size) || \
+ segment_eq(get_fs(), KERNEL_DS)))
+
+extern int copy_from_user(void *to, const void __user *from, int n);
+extern int copy_to_user(void __user *to, const void *from, int n);
+
+/*
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+
+extern int strncpy_from_user(char *dst, const char __user *src, int count);
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern int __clear_user(void __user *mem, int len);
+
+/*
+ * clear_user: - Zero a block of memory in user space.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern int clear_user(void __user *mem, int len);
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ * @n: The maximum valid length
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than @n.
+ */
+extern int strnlen_user(const void __user *str, int len);
#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
diff --git a/arch/um/include/asm/xor.h b/arch/um/include/asm/xor.h
deleted file mode 100644
index a19db3e..0000000
--- a/arch/um/include/asm/xor.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_XOR_H
-#define __UM_XOR_H
-
-#include "asm-generic/xor.h"
-
-#endif
diff --git a/arch/um/include/shared/as-layout.h b/arch/um/include/shared/as-layout.h
index a92b678..896e166 100644
--- a/arch/um/include/shared/as-layout.h
+++ b/arch/um/include/shared/as-layout.h
@@ -6,7 +6,7 @@
#ifndef __START_H__
#define __START_H__
-#include "kern_constants.h"
+#include <generated/asm-offsets.h>
/*
* Stolen from linux/const.h, which can't be directly included since
diff --git a/arch/um/include/shared/chan_kern.h b/arch/um/include/shared/chan_kern.h
deleted file mode 100644
index 1e65145..0000000
--- a/arch/um/include/shared/chan_kern.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __CHAN_KERN_H__
-#define __CHAN_KERN_H__
-
-#include "linux/tty.h"
-#include "linux/list.h"
-#include "linux/console.h"
-#include "chan_user.h"
-#include "line.h"
-
-struct chan {
- struct list_head list;
- struct list_head free_list;
- struct line *line;
- char *dev;
- unsigned int primary:1;
- unsigned int input:1;
- unsigned int output:1;
- unsigned int opened:1;
- unsigned int enabled:1;
- int fd;
- const struct chan_ops *ops;
- void *data;
-};
-
-extern void chan_interrupt(struct list_head *chans, struct delayed_work *task,
- struct tty_struct *tty, int irq);
-extern int parse_chan_pair(char *str, struct line *line, int device,
- const struct chan_opts *opts, char **error_out);
-extern int write_chan(struct list_head *chans, const char *buf, int len,
- int write_irq);
-extern int console_write_chan(struct list_head *chans, const char *buf,
- int len);
-extern int console_open_chan(struct line *line, struct console *co);
-extern void deactivate_chan(struct list_head *chans, int irq);
-extern void reactivate_chan(struct list_head *chans, int irq);
-extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty);
-extern int enable_chan(struct line *line);
-extern void close_chan(struct list_head *chans, int delay_free_irq);
-extern int chan_window_size(struct list_head *chans,
- unsigned short *rows_out,
- unsigned short *cols_out);
-extern int chan_config_string(struct list_head *chans, char *str, int size,
- char **error_out);
-
-#endif
diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h
index 72009c7..d7fe563 100644
--- a/arch/um/include/shared/common-offsets.h
+++ b/arch/um/include/shared/common-offsets.h
@@ -2,7 +2,6 @@
DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
-OFFSET(HOST_TASK_REGS, task_struct, thread.regs);
OFFSET(HOST_TASK_PID, task_struct, pid);
DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE);
diff --git a/arch/um/include/shared/initrd.h b/arch/um/include/shared/initrd.h
deleted file mode 100644
index 22673bc..0000000
--- a/arch/um/include/shared/initrd.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __INITRD_USER_H__
-#define __INITRD_USER_H__
-
-extern int load_initrd(char *filename, void *buf, int size);
-
-#endif
-
diff --git a/arch/um/include/shared/kern.h b/arch/um/include/shared/kern.h
index 4ce3fc6..6cd0124 100644
--- a/arch/um/include/shared/kern.h
+++ b/arch/um/include/shared/kern.h
@@ -13,28 +13,10 @@
* includes.
*/
-extern int errno;
-
-extern int clone(int (*proc)(void *), void *sp, int flags, void *data);
-extern int sleep(int);
extern int printf(const char *fmt, ...);
-extern char *strerror(int errnum);
-extern char *ptsname(int __fd);
-extern int munmap(void *, int);
extern void *sbrk(int increment);
-extern void *malloc(int size);
-extern void perror(char *err);
-extern int kill(int pid, int sig);
-extern int getuid(void);
-extern int getgid(void);
extern int pause(void);
-extern int write(int, const void *, int);
extern void exit(int);
-extern int close(int);
-extern int read(unsigned int, char *, int);
-extern int pipe(int *);
-extern int sched_yield(void);
-extern int ptrace(int op, int pid, long addr, long data);
#endif
diff --git a/arch/um/include/shared/kern_util.h b/arch/um/include/shared/kern_util.h
index 3c34122..0f14838 100644
--- a/arch/um/include/shared/kern_util.h
+++ b/arch/um/include/shared/kern_util.h
@@ -21,7 +21,6 @@
extern void free_stack(unsigned long stack, int order);
extern int do_signal(void);
-extern void copy_sc(struct uml_pt_regs *regs, void *from);
extern void interrupt_end(void);
extern void relay_signal(int sig, struct uml_pt_regs *regs);
diff --git a/arch/um/include/shared/ldt.h b/arch/um/include/shared/ldt.h
deleted file mode 100644
index a7f999a..0000000
--- a/arch/um/include/shared/ldt.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Licensed under the GPL
- *
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- */
-
-#ifndef __ASM_LDT_H
-#define __ASM_LDT_H
-
-#include <linux/mutex.h>
-#include <sysdep/host_ldt.h>
-
-extern void ldt_host_info(void);
-
-#define LDT_PAGES_MAX \
- ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
-#define LDT_ENTRIES_PER_PAGE \
- (PAGE_SIZE/LDT_ENTRY_SIZE)
-#define LDT_DIRECT_ENTRIES \
- ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
-
-struct ldt_entry {
- __u32 a;
- __u32 b;
-};
-
-typedef struct uml_ldt {
- int entry_count;
- struct mutex lock;
- union {
- struct ldt_entry * pages[LDT_PAGES_MAX];
- struct ldt_entry entries[LDT_DIRECT_ENTRIES];
- } u;
-} uml_ldt_t;
-
-#endif
diff --git a/arch/um/include/shared/mem_kern.h b/arch/um/include/shared/mem_kern.h
deleted file mode 100644
index 69be0fd..0000000
--- a/arch/um/include/shared/mem_kern.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __MEM_KERN_H__
-#define __MEM_KERN_H__
-
-#include "linux/list.h"
-#include "linux/types.h"
-
-struct remapper {
- struct list_head list;
- int (*proc)(int, unsigned long, int, __u64);
-};
-
-extern void register_remapper(struct remapper *info);
-
-#endif
-
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 83c7c2e..89b686c1 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -10,7 +10,6 @@
#include "irq_user.h"
#include "longjmp.h"
#include "mm_id.h"
-#include "sysdep/tls.h"
#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
@@ -203,12 +202,6 @@
extern int can_drop_memory(void);
extern void os_flush_stdout(void);
-/* uaccess.c */
-extern unsigned long __do_user_copy(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher,
- void (*op)(void *to, const void *from,
- int n), int *faulted_out);
-
/* execvp.c */
extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
/* helper.c */
@@ -218,10 +211,6 @@
extern int helper_wait(int pid);
-/* tls.c */
-extern int os_set_thread_area(user_desc_t *info, int pid);
-extern int os_get_thread_area(user_desc_t *info, int pid);
-
/* umid.c */
extern int umid_file_name(char *name, char *buf, int len);
extern int set_umid(char *name);
@@ -231,7 +220,7 @@
extern void timer_init(void);
extern void set_sigstack(void *sig_stack, int size);
extern void remove_sigstack(void);
-extern void set_handler(int sig, void (*handler)(int), int flags, ...);
+extern void set_handler(int sig);
extern int change_sig(int signal, int on);
extern void block_signals(void);
extern void unblock_signals(void);
diff --git a/arch/um/include/shared/process.h b/arch/um/include/shared/process.h
deleted file mode 100644
index bb873a5..0000000
--- a/arch/um/include/shared/process.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2000 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __PROCESS_H__
-#define __PROCESS_H__
-
-#include <signal.h>
-
-/* Copied from linux/compiler-gcc.h since we can't include it directly */
-#define barrier() __asm__ __volatile__("": : :"memory")
-
-extern void sig_handler(int sig, struct sigcontext *sc);
-extern void alarm_handler(int sig, struct sigcontext *sc);
-
-#endif
diff --git a/arch/um/include/shared/ptrace_user.h b/arch/um/include/shared/ptrace_user.h
index 7fd8539..56b2f28 100644
--- a/arch/um/include/shared/ptrace_user.h
+++ b/arch/um/include/shared/ptrace_user.h
@@ -6,7 +6,8 @@
#ifndef __PTRACE_USER_H__
#define __PTRACE_USER_H__
-#include "sysdep/ptrace_user.h"
+#include <sys/ptrace.h>
+#include <sysdep/ptrace_user.h>
extern int ptrace_getregs(long pid, unsigned long *regs_out);
extern int ptrace_setregs(long pid, unsigned long *regs_in);
diff --git a/arch/um/include/shared/skas_ptregs.h b/arch/um/include/shared/skas_ptregs.h
deleted file mode 100644
index 73db19e..0000000
--- a/arch/um/include/shared/skas_ptregs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SKAS_PT_REGS_
-#define __SKAS_PT_REGS_
-
-#include <user_constants.h>
-
-#endif
diff --git a/arch/um/include/shared/syscall.h b/arch/um/include/shared/syscall.h
deleted file mode 100644
index dda1df9..0000000
--- a/arch/um/include/shared/syscall.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSCALL_USER_H
-#define __SYSCALL_USER_H
-
-extern int record_syscall_start(int syscall);
-extern void record_syscall_end(int index, long result);
-
-#endif
diff --git a/arch/um/include/shared/task.h b/arch/um/include/shared/task.h
deleted file mode 100644
index 3fe726b..0000000
--- a/arch/um/include/shared/task.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __TASK_H
-#define __TASK_H
-
-#include <kern_constants.h>
-
-#define TASK_REGS(task) ((struct uml_pt_regs *) &(((char *) (task))[HOST_TASK_REGS]))
-#define TASK_PID(task) *((int *) &(((char *) (task))[HOST_TASK_PID]))
-
-#endif
diff --git a/arch/um/include/shared/tlb.h b/arch/um/include/shared/tlb.h
deleted file mode 100644
index ecd2265..0000000
--- a/arch/um/include/shared/tlb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __TLB_H__
-#define __TLB_H__
-
-#include "um_mmu.h"
-
-extern void force_flush_all(void);
-extern int flush_tlb_kernel_range_common(unsigned long start,
- unsigned long end);
-
-#endif
diff --git a/arch/um/include/shared/um_malloc.h b/arch/um/include/shared/um_malloc.h
index c554d70..6395fef 100644
--- a/arch/um/include/shared/um_malloc.h
+++ b/arch/um/include/shared/um_malloc.h
@@ -6,7 +6,7 @@
#ifndef __UM_MALLOC_H__
#define __UM_MALLOC_H__
-#include "kern_constants.h"
+#include <generated/asm-offsets.h>
extern void *uml_kmalloc(int size, int flags);
extern void kfree(const void *ptr);
diff --git a/arch/um/include/shared/um_mmu.h b/arch/um/include/shared/um_mmu.h
deleted file mode 100644
index b1a7e47..0000000
--- a/arch/um/include/shared/um_mmu.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __ARCH_UM_MMU_H
-#define __ARCH_UM_MMU_H
-
-#include "mm_id.h"
-#include "ldt.h"
-
-typedef struct mm_context {
- struct mm_id id;
- struct uml_ldt ldt;
- struct page **stub_pages;
-} mm_context_t;
-
-extern void __switch_mm(struct mm_id * mm_idp);
-
-/* Avoid tangled inclusion with asm/ldt.h */
-extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
-extern void free_ldt(struct mm_context *mm);
-
-#endif
diff --git a/arch/um/include/shared/um_uaccess.h b/arch/um/include/shared/um_uaccess.h
deleted file mode 100644
index 45c0499..0000000
--- a/arch/um/include/shared/um_uaccess.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __ARCH_UM_UACCESS_H
-#define __ARCH_UM_UACCESS_H
-
-#include <asm/elf.h>
-#include <asm/fixmap.h>
-#include "sysdep/archsetjmp.h"
-
-#define __under_task_size(addr, size) \
- (((unsigned long) (addr) < TASK_SIZE) && \
- (((unsigned long) (addr) + (size)) < TASK_SIZE))
-
-#define __access_ok_vsyscall(type, addr, size) \
- ((type == VERIFY_READ) && \
- ((unsigned long) (addr) >= FIXADDR_USER_START) && \
- ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
- ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))
-
-#define __addr_range_nowrap(addr, size) \
- ((unsigned long) (addr) <= ((unsigned long) (addr) + (size)))
-
-#define access_ok(type, addr, size) \
- (__addr_range_nowrap(addr, size) && \
- (__under_task_size(addr, size) || \
- __access_ok_vsyscall(type, addr, size) || \
- segment_eq(get_fs(), KERNEL_DS)))
-
-extern int copy_from_user(void *to, const void __user *from, int n);
-extern int copy_to_user(void __user *to, const void *from, int n);
-
-extern int __do_copy_to_user(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher);
-
-/*
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst: Destination address, in kernel space. This buffer must be at
- * least @count bytes long.
- * @src: Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-
-extern int strncpy_from_user(char *dst, const char __user *src, int count);
-
-/*
- * __clear_user: - Zero a block of memory in user space, with less checking.
- * @to: Destination address, in user space.
- * @n: Number of bytes to zero.
- *
- * Zero a block of memory in user space. Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be cleared.
- * On success, this will be zero.
- */
-extern int __clear_user(void __user *mem, int len);
-
-/*
- * clear_user: - Zero a block of memory in user space.
- * @to: Destination address, in user space.
- * @n: Number of bytes to zero.
- *
- * Zero a block of memory in user space.
- *
- * Returns number of bytes that could not be cleared.
- * On success, this will be zero.
- */
-extern int clear_user(void __user *mem, int len);
-
-/*
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- * @n: The maximum valid length
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-extern int strnlen_user(const void __user *str, int len);
-
-#endif
diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h
index 293f7c7..4fa82c0 100644
--- a/arch/um/include/shared/user.h
+++ b/arch/um/include/shared/user.h
@@ -6,7 +6,7 @@
#ifndef __USER_H__
#define __USER_H__
-#include "kern_constants.h"
+#include <generated/asm-offsets.h>
/*
* The usual definition - copied here because the kernel provides its own,
@@ -36,10 +36,11 @@
}
#endif
-extern void schedule(void);
extern int in_aton(char *str);
-extern int open_gdb_chan(void);
extern size_t strlcpy(char *, const char *, size_t);
extern size_t strlcat(char *, const char *, size_t);
+/* Copied from linux/compiler-gcc.h since we can't include it directly */
+#define barrier() __asm__ __volatile__("": : :"memory")
+
#endif
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index c4491c1..bc49474 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -11,7 +11,7 @@
obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \
physmem.o process.o ptrace.o reboot.o sigio.o \
- signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o uaccess.o \
+ signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o \
um_arch.o umid.o skas/
obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 939a4a6..6cade93 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -3,14 +3,15 @@
* Licensed under the GPL
*/
-#include "linux/stddef.h"
-#include "linux/fs.h"
-#include "linux/ptrace.h"
-#include "linux/sched.h"
-#include "linux/slab.h"
-#include "asm/current.h"
-#include "asm/processor.h"
-#include "asm/uaccess.h"
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
#include "as-layout.h"
#include "mem_user.h"
#include "skas.h"
@@ -41,6 +42,7 @@
PT_REGS_IP(regs) = eip;
PT_REGS_SP(regs) = esp;
}
+EXPORT_SYMBOL(start_thread);
static long execve1(const char *file,
const char __user *const __user *argv,
diff --git a/arch/um/kernel/gmon_syms.c b/arch/um/kernel/gmon_syms.c
index 72eccd2..e9bcf247 100644
--- a/arch/um/kernel/gmon_syms.c
+++ b/arch/um/kernel/gmon_syms.c
@@ -7,18 +7,3 @@
extern void __bb_init_func(void *) __attribute__((weak));
EXPORT_SYMBOL(__bb_init_func);
-
-/*
- * This is defined (and referred to in profiling stub code) only by some GCC
- * versions in libgcov.
- *
- * Since SuSE backported the fix, we cannot handle it depending on GCC version.
- * So, unconditionally export it. But also give it a weak declaration, which
- * will be overridden by any other one.
- */
-
-extern void __gcov_init(void *) __attribute__((weak));
-EXPORT_SYMBOL(__gcov_init);
-
-extern void __gcov_merge_add(void *) __attribute__((weak));
-EXPORT_SYMBOL(__gcov_merge_add);
diff --git a/arch/um/kernel/initrd.c b/arch/um/kernel/initrd.c
index d386c75..10cc18f 100644
--- a/arch/um/kernel/initrd.c
+++ b/arch/um/kernel/initrd.c
@@ -7,12 +7,12 @@
#include "linux/bootmem.h"
#include "linux/initrd.h"
#include "asm/types.h"
-#include "initrd.h"
#include "init.h"
#include "os.h"
/* Changed by uml_initrd_setup, which is a setup */
static char *initrd __initdata = NULL;
+static int load_initrd(char *filename, void *buf, int size);
static int __init read_initrd(void)
{
@@ -62,7 +62,7 @@
" name of the file containing the image.\n\n"
);
-int load_initrd(char *filename, void *buf, int size)
+static int load_initrd(char *filename, void *buf, int size)
{
int fd, n;
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 9e485c7..71b8c94 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -258,6 +258,7 @@
ignore_sigio_fd(fd);
}
+EXPORT_SYMBOL(deactivate_fd);
/*
* Called just before shutdown in order to provide a clean exec
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 0ae0dfc..e17bea0 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -3,33 +3,11 @@
* Licensed under the GPL
*/
-#include "linux/module.h"
-#include "linux/syscalls.h"
-#include "asm/tlbflush.h"
-#include "asm/uaccess.h"
-#include "as-layout.h"
-#include "kern_util.h"
-#include "mem_user.h"
+#include <linux/module.h>
#include "os.h"
-EXPORT_SYMBOL(uml_physmem);
EXPORT_SYMBOL(set_signals);
EXPORT_SYMBOL(get_signals);
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(sys_waitpid);
-EXPORT_SYMBOL(flush_tlb_range);
-
-EXPORT_SYMBOL(high_physmem);
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(handle_page_fault);
-EXPORT_SYMBOL(find_iomem);
-
-EXPORT_SYMBOL(strnlen_user);
-EXPORT_SYMBOL(strncpy_from_user);
-EXPORT_SYMBOL(copy_to_user);
-EXPORT_SYMBOL(copy_from_user);
-EXPORT_SYMBOL(clear_user);
-EXPORT_SYMBOL(uml_strdup);
EXPORT_SYMBOL(os_stat_fd);
EXPORT_SYMBOL(os_stat_file);
@@ -57,24 +35,10 @@
EXPORT_SYMBOL(os_accept_connection);
EXPORT_SYMBOL(os_rcv_fd);
EXPORT_SYMBOL(run_helper);
-EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(os_major);
EXPORT_SYMBOL(os_minor);
EXPORT_SYMBOL(os_makedev);
EXPORT_SYMBOL(add_sigio_fd);
EXPORT_SYMBOL(ignore_sigio_fd);
-EXPORT_SYMBOL(deactivate_fd);
EXPORT_SYMBOL(sigio_broken);
-
-#ifdef CONFIG_SMP
-
-/* required for SMP */
-
-extern void __write_lock_failed(rwlock_t *rw);
-EXPORT_SYMBOL(__write_lock_failed);
-
-extern void __read_lock_failed(rwlock_t *rw);
-EXPORT_SYMBOL(__read_lock_failed);
-
-#endif
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 8137ccc..ebb86b2 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -4,6 +4,7 @@
*/
#include <linux/stddef.h>
+#include <linux/module.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/mm.h>
@@ -20,6 +21,7 @@
/* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
unsigned long *empty_zero_page = NULL;
+EXPORT_SYMBOL(empty_zero_page);
/* allocated in paging_init and unchanged thereafter */
static unsigned long *empty_bad_page = NULL;
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index a1a9090..f116db1 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -3,20 +3,22 @@
* Licensed under the GPL
*/
-#include "linux/bootmem.h"
-#include "linux/mm.h"
-#include "linux/pfn.h"
-#include "asm/page.h"
-#include "as-layout.h"
-#include "init.h"
-#include "kern.h"
-#include "mem_user.h"
-#include "os.h"
+#include <linux/module.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/page.h>
+#include <as-layout.h>
+#include <init.h>
+#include <kern.h>
+#include <mem_user.h>
+#include <os.h>
static int physmem_fd = -1;
/* Changed during early boot */
unsigned long high_physmem;
+EXPORT_SYMBOL(high_physmem);
extern unsigned long long physmem_size;
@@ -184,6 +186,7 @@
return 0;
}
+EXPORT_SYMBOL(find_iomem);
static int setup_iomem(void)
{
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 21c1ae7..c533835 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -20,12 +20,12 @@
#include <linux/threads.h>
#include <asm/current.h>
#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
#include <asm/uaccess.h>
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
#include "skas.h"
-#include "tlb.h"
/*
* This is a per-cpu array. A processor only modifies its entry and it only
@@ -78,6 +78,7 @@
¤t->thread.regs, 0, NULL, NULL);
return pid;
}
+EXPORT_SYMBOL(kernel_thread);
static inline void set_current(struct task_struct *task)
{
@@ -286,6 +287,7 @@
{
return kstrdup(string, GFP_KERNEL);
}
+EXPORT_SYMBOL(uml_strdup);
int copy_to_user_proc(void __user *to, void *from, int size)
{
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index b5c094c..e8b889d 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -11,7 +11,6 @@
#include <asm/unistd.h>
#include "frame_kern.h"
#include "kern_util.h"
-#include <sysdep/sigcontext.h>
EXPORT_SYMBOL(block_signals);
EXPORT_SYMBOL(unblock_signals);
diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c
index 2c8583c..e1fd066 100644
--- a/arch/um/kernel/skas/clone.c
+++ b/arch/um/kernel/skas/clone.c
@@ -8,7 +8,6 @@
#include <asm/unistd.h>
#include <sys/time.h>
#include "as-layout.h"
-#include "kern_constants.h"
#include "ptrace_user.h"
#include "stub-data.h"
#include "sysdep/stub.h"
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index 6966342..9fefd92 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -6,6 +6,7 @@
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/sched.h>
#include <asm/current.h>
#include <asm/page.h>
@@ -149,6 +150,7 @@
buffer_op((unsigned long) from, n, 0, copy_chunk_from_user, &to):
n;
}
+EXPORT_SYMBOL(copy_from_user);
static int copy_chunk_to_user(unsigned long to, int len, void *arg)
{
@@ -170,6 +172,7 @@
buffer_op((unsigned long) to, n, 1, copy_chunk_to_user, &from) :
n;
}
+EXPORT_SYMBOL(copy_to_user);
static int strncpy_chunk_from_user(unsigned long from, int len, void *arg)
{
@@ -204,6 +207,7 @@
return -EFAULT;
return strnlen(dst, count);
}
+EXPORT_SYMBOL(strncpy_from_user);
static int clear_chunk(unsigned long addr, int len, void *unused)
{
@@ -226,6 +230,7 @@
return access_ok(VERIFY_WRITE, mem, len) ?
buffer_op((unsigned long) mem, len, 1, clear_chunk, NULL) : len;
}
+EXPORT_SYMBOL(clear_user);
static int strnlen_chunk(unsigned long str, int len, void *arg)
{
@@ -251,3 +256,4 @@
return count + 1;
return -EFAULT;
}
+EXPORT_SYMBOL(strnlen_user);
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index d175d05..7f3d4d86 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -4,6 +4,7 @@
*/
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/sched.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
@@ -11,7 +12,6 @@
#include "mem_user.h"
#include "os.h"
#include "skas.h"
-#include "tlb.h"
struct host_vm_change {
struct host_vm_op {
@@ -287,7 +287,7 @@
}
}
-int flush_tlb_kernel_range_common(unsigned long start, unsigned long end)
+static int flush_tlb_kernel_range_common(unsigned long start, unsigned long end)
{
struct mm_struct *mm;
pgd_t *pgd;
@@ -499,6 +499,7 @@
flush_tlb_kernel_range_common(start, end);
else fix_range(vma->vm_mm, start, end, 0);
}
+EXPORT_SYMBOL(flush_tlb_range);
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end)
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index 8c7b882..dafc947 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -6,6 +6,7 @@
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/hardirq.h>
+#include <linux/module.h>
#include <asm/current.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
@@ -14,7 +15,6 @@
#include "kern_util.h"
#include "os.h"
#include "skas.h"
-#include "sysdep/sigcontext.h"
/*
* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
@@ -112,6 +112,7 @@
pagefault_out_of_memory();
return 0;
}
+EXPORT_SYMBOL(handle_page_fault);
static void show_segv_info(struct uml_pt_regs *regs)
{
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
deleted file mode 100644
index dd33f04..0000000
--- a/arch/um/kernel/uaccess.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-/*
- * These are here rather than tt/uaccess.c because skas mode needs them in
- * order to do SIGBUS recovery when a tmpfs mount runs out of room.
- */
-
-#include <linux/string.h>
-#include "os.h"
-
-static void __do_copy(void *to, const void *from, int n)
-{
- memcpy(to, from, n);
-}
-
-
-int __do_copy_to_user(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher)
-{
- unsigned long fault;
- int faulted;
-
- fault = __do_user_copy(to, from, n, fault_addr, fault_catcher,
- __do_copy, &faulted);
- if (!faulted)
- return 0;
- else
- return n - (fault - (unsigned long) to);
-}
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 8d84250..ba00eae 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -102,6 +102,8 @@
/* Set in linux_main */
unsigned long uml_physmem;
+EXPORT_SYMBOL(uml_physmem);
+
unsigned long uml_reserved; /* Also modified in mem_init */
unsigned long start_vm;
unsigned long end_vm;
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index b33f4df..dd76410 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -4,14 +4,14 @@
#
obj-y = aio.o execvp.o file.o helper.o irq.o main.o mem.o process.o \
- registers.o sigio.o signal.o start_up.o time.o tty.o uaccess.o \
- umid.o tls.o user_syms.o util.o drivers/ sys-$(SUBARCH)/ skas/
+ registers.o sigio.o signal.o start_up.o time.o tty.o \
+ umid.o user_syms.o util.o drivers/ skas/
obj-$(CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA) += elf_aux.o
USER_OBJS := $(user-objs-y) aio.o elf_aux.o execvp.o file.o helper.o irq.o \
main.o mem.o process.o registers.o sigio.o signal.o start_up.o time.o \
- tty.o tls.o uaccess.o umid.o util.o
+ tty.o umid.o util.o
CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH)
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index 57e3d46..c5d039e 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -11,10 +11,8 @@
#include <asm/unistd.h>
#include "aio.h"
#include "init.h"
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
-#include "user.h"
struct aio_thread_req {
enum aio_type type;
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index cc72cb2..db3d648 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -13,11 +13,9 @@
#include <sys/socket.h>
#include <sys/wait.h>
#include "etap.h"
-#include "kern_constants.h"
#include "os.h"
#include "net_user.h"
#include "um_malloc.h"
-#include "user.h"
#define MAX_PACKET ETH_MAX_PACKET
diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c
index 2448be0..a2aacff 100644
--- a/arch/um/os-Linux/drivers/tuntap_user.c
+++ b/arch/um/os-Linux/drivers/tuntap_user.c
@@ -13,11 +13,9 @@
#include <sys/socket.h>
#include <sys/wait.h>
#include <sys/uio.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
#include "tuntap.h"
-#include "user.h"
static int tuntap_user_init(void *data, void *dev)
{
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index 9533237..d895271 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -12,7 +12,6 @@
#include "init.h"
#include "elf_user.h"
#include "mem_user.h"
-#include <kern_constants.h>
typedef Elf32_auxv_t elf_auxv_t;
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 140e587..b049a63 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -13,9 +13,7 @@
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/un.h>
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
static void copy_stat(struct uml_stat *dst, const struct stat64 *src)
{
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index feff22d..cf26c4a 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -10,11 +10,9 @@
#include <linux/limits.h>
#include <sys/socket.h>
#include <sys/wait.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct helper_data {
void (*pre_exec)(void*);
diff --git a/arch/um/os-Linux/internal.h b/arch/um/os-Linux/internal.h
new file mode 100644
index 0000000..2c3c3ec
--- /dev/null
+++ b/arch/um/os-Linux/internal.h
@@ -0,0 +1 @@
+void alarm_handler(int, mcontext_t *);
diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c
index 0348b97..9a49908 100644
--- a/arch/um/os-Linux/irq.c
+++ b/arch/um/os-Linux/irq.c
@@ -9,11 +9,8 @@
#include <signal.h>
#include <string.h>
#include "irq_user.h"
-#include "kern_constants.h"
#include "os.h"
-#include "process.h"
#include "um_malloc.h"
-#include "user.h"
/*
* Locked by irq_lock in arch/um/kernel/irq.c. Changed by os_create_pollfd
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index 8471b81..7a86dd5 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -12,7 +12,6 @@
#include <sys/resource.h>
#include "as-layout.h"
#include "init.h"
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
#include "um_malloc.h"
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 62878cf1..8e421e1 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -14,9 +14,7 @@
#include <sys/mman.h>
#include <sys/param.h>
#include "init.h"
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
/* Modified by which_tmpdir, which is called during early boot */
static char *default_tmpdir = "/tmp";
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 0c45dc8..307f173 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -13,12 +13,9 @@
#include <sys/wait.h>
#include <asm/unistd.h>
#include "init.h"
-#include "kern_constants.h"
#include "longjmp.h"
#include "os.h"
-#include "process.h"
#include "skas_ptrace.h"
-#include "user.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@@ -237,21 +234,13 @@
void init_new_thread_signals(void)
{
- set_handler(SIGSEGV, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGTRAP, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGFPE, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGILL, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGBUS, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
+ set_handler(SIGSEGV);
+ set_handler(SIGTRAP);
+ set_handler(SIGFPE);
+ set_handler(SIGILL);
+ set_handler(SIGBUS);
signal(SIGHUP, SIG_IGN);
-
- set_handler(SIGIO, (__sighandler_t) sig_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM,
- SIGVTALRM, -1);
+ set_handler(SIGIO);
signal(SIGWINCH, SIG_IGN);
signal(SIGTERM, SIG_DFL);
}
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index 63d299d..3c16121 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -11,14 +11,11 @@
#include <sched.h>
#include <signal.h>
#include <string.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "init.h"
#include "os.h"
-#include "process.h"
#include "sigio.h"
#include "um_malloc.h"
-#include "user.h"
/*
* Protected by sigio_lock(), also used by sigio_cleanup, which is an
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 6ae1807..2d22f1f 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -12,13 +12,7 @@
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
-#include "process.h"
-#include "sysdep/barrier.h"
-#include "sysdep/sigcontext.h"
-#include "user.h"
-
-/* Copied from linux/compiler-gcc.h since we can't include it directly */
-#define barrier() __asm__ __volatile__("": : :"memory")
+#include "sysdep/mcontext.h"
void (*sig_info[NSIG])(int, struct uml_pt_regs *) = {
[SIGTRAP] = relay_signal,
@@ -30,7 +24,7 @@
[SIGIO] = sigio_handler,
[SIGVTALRM] = timer_handler };
-static void sig_handler_common(int sig, struct sigcontext *sc)
+static void sig_handler_common(int sig, mcontext_t *mc)
{
struct uml_pt_regs r;
int save_errno = errno;
@@ -38,8 +32,8 @@
r.is_user = 0;
if (sig == SIGSEGV) {
/* For segfaults, we want the data from the sigcontext. */
- copy_sc(&r, sc);
- GET_FAULTINFO_FROM_SC(r.faultinfo, sc);
+ get_regs_from_mc(&r, mc);
+ GET_FAULTINFO_FROM_MC(r.faultinfo, mc);
}
/* enable signals if sig isn't IRQ signal */
@@ -66,7 +60,7 @@
static int signals_enabled;
static unsigned int signals_pending;
-void sig_handler(int sig, struct sigcontext *sc)
+void sig_handler(int sig, mcontext_t *mc)
{
int enabled;
@@ -78,23 +72,23 @@
block_signals();
- sig_handler_common(sig, sc);
+ sig_handler_common(sig, mc);
set_signals(enabled);
}
-static void real_alarm_handler(struct sigcontext *sc)
+static void real_alarm_handler(mcontext_t *mc)
{
struct uml_pt_regs regs;
- if (sc != NULL)
- copy_sc(®s, sc);
+ if (mc != NULL)
+ get_regs_from_mc(®s, mc);
regs.is_user = 0;
unblock_signals();
timer_handler(SIGVTALRM, ®s);
}
-void alarm_handler(int sig, struct sigcontext *sc)
+void alarm_handler(int sig, mcontext_t *mc)
{
int enabled;
@@ -106,14 +100,13 @@
block_signals();
- real_alarm_handler(sc);
+ real_alarm_handler(mc);
set_signals(enabled);
}
void timer_init(void)
{
- set_handler(SIGVTALRM, (__sighandler_t) alarm_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, -1);
+ set_handler(SIGVTALRM);
}
void set_sigstack(void *sig_stack, int size)
@@ -126,10 +119,23 @@
panic("enabling signal stack failed, errno = %d\n", errno);
}
-static void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+static void (*handlers[_NSIG])(int sig, mcontext_t *mc) = {
+ [SIGSEGV] = sig_handler,
+ [SIGBUS] = sig_handler,
+ [SIGILL] = sig_handler,
+ [SIGFPE] = sig_handler,
+ [SIGTRAP] = sig_handler,
-void handle_signal(int sig, struct sigcontext *sc)
+ [SIGIO] = sig_handler,
+ [SIGWINCH] = sig_handler,
+ [SIGVTALRM] = alarm_handler
+};
+
+
+static void hard_handler(int sig, siginfo_t *info, void *p)
{
+ struct ucontext *uc = p;
+ mcontext_t *mc = &uc->uc_mcontext;
unsigned long pending = 1UL << sig;
do {
@@ -155,7 +161,7 @@
while ((sig = ffs(pending)) != 0){
sig--;
pending &= ~(1 << sig);
- (*handlers[sig])(sig, sc);
+ (*handlers[sig])(sig, mc);
}
/*
@@ -169,28 +175,26 @@
} while (pending);
}
-extern void hard_handler(int sig);
-
-void set_handler(int sig, void (*handler)(int), int flags, ...)
+void set_handler(int sig)
{
struct sigaction action;
- va_list ap;
+ int flags = SA_SIGINFO | SA_ONSTACK;
sigset_t sig_mask;
- int mask;
- handlers[sig] = (void (*)(int, struct sigcontext *)) handler;
- action.sa_handler = hard_handler;
+ action.sa_sigaction = hard_handler;
+ /* block irq ones */
sigemptyset(&action.sa_mask);
-
- va_start(ap, flags);
- while ((mask = va_arg(ap, int)) != -1)
- sigaddset(&action.sa_mask, mask);
- va_end(ap);
+ sigaddset(&action.sa_mask, SIGVTALRM);
+ sigaddset(&action.sa_mask, SIGIO);
+ sigaddset(&action.sa_mask, SIGWINCH);
if (sig == SIGSEGV)
flags |= SA_NODEFER;
+ if (sigismember(&action.sa_mask, sig))
+ flags |= SA_RESTART; /* if it's an irq signal */
+
action.sa_flags = flags;
action.sa_restorer = NULL;
if (sigaction(sig, &action, NULL) < 0)
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index e771398..c0afff7 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -9,7 +9,6 @@
#include <string.h>
#include <sys/mman.h>
#include "init.h"
-#include "kern_constants.h"
#include "as-layout.h"
#include "mm_id.h"
#include "os.h"
@@ -17,7 +16,6 @@
#include "ptrace_user.h"
#include "registers.h"
#include "skas.h"
-#include "user.h"
#include "sysdep/ptrace.h"
#include "sysdep/stub.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index dee0e8c..cd65727 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -9,31 +9,23 @@
#include <errno.h>
#include <string.h>
#include <sys/mman.h>
-#include <sys/ptrace.h>
#include <sys/wait.h>
#include <asm/unistd.h>
#include "as-layout.h"
-#include "chan_user.h"
-#include "kern_constants.h"
+#include "init.h"
#include "kern_util.h"
#include "mem.h"
#include "os.h"
-#include "process.h"
#include "proc_mm.h"
#include "ptrace_user.h"
#include "registers.h"
#include "skas.h"
#include "skas_ptrace.h"
-#include "user.h"
#include "sysdep/stub.h"
int is_skas_winch(int pid, int fd, void *data)
{
- if (pid != getpgrp())
- return 0;
-
- register_winch_irq(-1, fd, -1, data, 0);
- return 1;
+ return pid == getpgrp();
}
static int ptrace_dump_regs(int pid)
@@ -169,7 +161,7 @@
if (!local_using_sysemu)
{
- err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
+ err = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_NR_OFFSET,
__NR_getpid);
if (err < 0) {
printk(UM_KERN_ERR "handle_trap - nullifying syscall "
@@ -257,8 +249,8 @@
set_sigstack((void *) STUB_DATA, UM_KERN_PAGE_SIZE);
sigemptyset(&sa.sa_mask);
- sa.sa_flags = SA_ONSTACK | SA_NODEFER;
- sa.sa_handler = (void *) v;
+ sa.sa_flags = SA_ONSTACK | SA_NODEFER | SA_SIGINFO;
+ sa.sa_sigaction = (void *) v;
sa.sa_restorer = NULL;
if (sigaction(SIGSEGV, &sa, NULL) < 0) {
printk(UM_KERN_ERR "userspace_tramp - setting SIGSEGV "
@@ -661,8 +653,7 @@
{
int n;
- set_handler(SIGWINCH, (__sighandler_t) sig_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGVTALRM, -1);
+ set_handler(SIGWINCH);
/*
* Can't use UML_SETJMP or UML_LONGJMP here because they save
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 02ee9ad..425162e 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -13,12 +13,10 @@
#include <signal.h>
#include <string.h>
#include <sys/mman.h>
-#include <sys/ptrace.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <asm/unistd.h>
#include "init.h"
-#include "kern_constants.h"
#include "os.h"
#include "mem_user.h"
#include "ptrace_user.h"
@@ -225,7 +223,7 @@
goto fail;
}
- n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid());
+ n = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_RET_OFFSET, os_getpid());
if (n < 0) {
non_fatal("check_sysemu : failed to modify system call "
"return");
@@ -261,7 +259,7 @@
"doesn't singlestep");
goto fail;
}
- n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
+ n = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_RET_OFFSET,
os_getpid());
if (n < 0)
fatal_perror("check_sysemu : failed to modify "
@@ -317,10 +315,10 @@
fatal("check_ptrace : expected (SIGTRAP|0x80), "
"got status = %d", status);
- syscall = ptrace(PTRACE_PEEKUSR, pid, PT_SYSCALL_NR_OFFSET,
+ syscall = ptrace(PTRACE_PEEKUSER, pid, PT_SYSCALL_NR_OFFSET,
0);
if (syscall == __NR_getpid) {
- n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
+ n = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_NR_OFFSET,
__NR_getppid);
if (n < 0)
fatal_perror("check_ptrace : failed to modify "
diff --git a/arch/um/os-Linux/sys-i386/Makefile b/arch/um/os-Linux/sys-i386/Makefile
deleted file mode 100644
index b4bc6ac..0000000
--- a/arch/um/os-Linux/sys-i386/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
-# Licensed under the GPL
-#
-
-obj-y = registers.o signal.o task_size.o tls.o
-
-USER_OBJS := $(obj-y)
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
deleted file mode 100644
index 229f7a5..0000000
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2004 PathScale, Inc
- * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include <sys/ptrace.h>
-#include <sys/user.h>
-#include "kern_constants.h"
-#include "longjmp.h"
-#include "user.h"
-#include "sysdep/ptrace_user.h"
-
-int save_fp_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_GETFPREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-int restore_fp_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_SETFPREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-int save_fpx_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_GETFPXREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-int restore_fpx_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_SETFPXREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-unsigned long get_thread_reg(int reg, jmp_buf *buf)
-{
- switch (reg) {
- case EIP:
- return buf[0]->__eip;
- case UESP:
- return buf[0]->__esp;
- case EBP:
- return buf[0]->__ebp;
- default:
- printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
- reg);
- return 0;
- }
-}
-
-int have_fpx_regs = 1;
-
-int get_fp_registers(int pid, unsigned long *regs)
-{
- if (have_fpx_regs)
- return save_fpx_registers(pid, regs);
- else
- return save_fp_registers(pid, regs);
-}
-
-int put_fp_registers(int pid, unsigned long *regs)
-{
- if (have_fpx_regs)
- return restore_fpx_registers(pid, regs);
- else
- return restore_fp_registers(pid, regs);
-}
-
-void arch_init_registers(int pid)
-{
- struct user_fpxregs_struct fpx_regs;
- int err;
-
- err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
- if (!err)
- return;
-
- if (errno != EIO)
- panic("check_ptrace : PTRACE_GETFPXREGS failed, errno = %d",
- errno);
-
- have_fpx_regs = 0;
-}
diff --git a/arch/um/os-Linux/sys-i386/signal.c b/arch/um/os-Linux/sys-i386/signal.c
deleted file mode 100644
index f311609..0000000
--- a/arch/um/os-Linux/sys-i386/signal.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright (C) 2006 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-
-extern void handle_signal(int sig, struct sigcontext *sc);
-
-void hard_handler(int sig)
-{
- handle_signal(sig, (struct sigcontext *) (&sig + 1));
-}
diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c
deleted file mode 100644
index be04c1e..0000000
--- a/arch/um/os-Linux/sys-i386/task_size.c
+++ /dev/null
@@ -1,139 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <sys/mman.h>
-#include "longjmp.h"
-#include "kern_constants.h"
-
-static jmp_buf buf;
-
-static void segfault(int sig)
-{
- longjmp(buf, 1);
-}
-
-static int page_ok(unsigned long page)
-{
- unsigned long *address = (unsigned long *) (page << UM_KERN_PAGE_SHIFT);
- unsigned long n = ~0UL;
- void *mapped = NULL;
- int ok = 0;
-
- /*
- * First see if the page is readable. If it is, it may still
- * be a VDSO, so we go on to see if it's writable. If not
- * then try mapping memory there. If that fails, then we're
- * still in the kernel area. As a sanity check, we'll fail if
- * the mmap succeeds, but gives us an address different from
- * what we wanted.
- */
- if (setjmp(buf) == 0)
- n = *address;
- else {
- mapped = mmap(address, UM_KERN_PAGE_SIZE,
- PROT_READ | PROT_WRITE,
- MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if (mapped == MAP_FAILED)
- return 0;
- if (mapped != address)
- goto out;
- }
-
- /*
- * Now, is it writeable? If so, then we're in user address
- * space. If not, then try mprotecting it and try the write
- * again.
- */
- if (setjmp(buf) == 0) {
- *address = n;
- ok = 1;
- goto out;
- } else if (mprotect(address, UM_KERN_PAGE_SIZE,
- PROT_READ | PROT_WRITE) != 0)
- goto out;
-
- if (setjmp(buf) == 0) {
- *address = n;
- ok = 1;
- }
-
- out:
- if (mapped != NULL)
- munmap(mapped, UM_KERN_PAGE_SIZE);
- return ok;
-}
-
-unsigned long os_get_top_address(void)
-{
- struct sigaction sa, old;
- unsigned long bottom = 0;
- /*
- * A 32-bit UML on a 64-bit host gets confused about the VDSO at
- * 0xffffe000. It is mapped, is readable, can be reprotected writeable
- * and written. However, exec discovers later that it can't be
- * unmapped. So, just set the highest address to be checked to just
- * below it. This might waste some address space on 4G/4G 32-bit
- * hosts, but shouldn't hurt otherwise.
- */
- unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
- unsigned long test, original;
-
- printf("Locating the bottom of the address space ... ");
- fflush(stdout);
-
- /*
- * We're going to be longjmping out of the signal handler, so
- * SA_DEFER needs to be set.
- */
- sa.sa_handler = segfault;
- sigemptyset(&sa.sa_mask);
- sa.sa_flags = SA_NODEFER;
- if (sigaction(SIGSEGV, &sa, &old)) {
- perror("os_get_top_address");
- exit(1);
- }
-
- /* Manually scan the address space, bottom-up, until we find
- * the first valid page (or run out of them).
- */
- for (bottom = 0; bottom < top; bottom++) {
- if (page_ok(bottom))
- break;
- }
-
- /* If we've got this far, we ran out of pages. */
- if (bottom == top) {
- fprintf(stderr, "Unable to determine bottom of address "
- "space.\n");
- exit(1);
- }
-
- printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
- printf("Locating the top of the address space ... ");
- fflush(stdout);
-
- original = bottom;
-
- /* This could happen with a 4G/4G split */
- if (page_ok(top))
- goto out;
-
- do {
- test = bottom + (top - bottom) / 2;
- if (page_ok(test))
- bottom = test;
- else
- top = test;
- } while (top - bottom > 1);
-
-out:
- /* Restore the old SIGSEGV handling */
- if (sigaction(SIGSEGV, &old, NULL)) {
- perror("os_get_top_address");
- exit(1);
- }
- top <<= UM_KERN_PAGE_SHIFT;
- printf("0x%x\n", top);
-
- return top;
-}
diff --git a/arch/um/os-Linux/sys-i386/tls.c b/arch/um/os-Linux/sys-i386/tls.c
deleted file mode 100644
index 32ed41e..0000000
--- a/arch/um/os-Linux/sys-i386/tls.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <errno.h>
-#include <linux/unistd.h>
-
-#include <sys/syscall.h>
-#include <unistd.h>
-
-#include "sysdep/tls.h"
-#include "user.h"
-
-/* Checks whether host supports TLS, and sets *tls_min according to the value
- * valid on the host.
- * i386 host have it == 6; x86_64 host have it == 12, for i386 emulation. */
-void check_host_supports_tls(int *supports_tls, int *tls_min) {
- /* Values for x86 and x86_64.*/
- int val[] = {GDT_ENTRY_TLS_MIN_I386, GDT_ENTRY_TLS_MIN_X86_64};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(val); i++) {
- user_desc_t info;
- info.entry_number = val[i];
-
- if (syscall(__NR_get_thread_area, &info) == 0) {
- *tls_min = val[i];
- *supports_tls = 1;
- return;
- } else {
- if (errno == EINVAL)
- continue;
- else if (errno == ENOSYS)
- *supports_tls = 0;
- return;
- }
- }
-
- *supports_tls = 0;
-}
diff --git a/arch/um/os-Linux/sys-x86_64/Makefile b/arch/um/os-Linux/sys-x86_64/Makefile
deleted file mode 100644
index a44a47f..0000000
--- a/arch/um/os-Linux/sys-x86_64/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
-# Licensed under the GPL
-#
-
-obj-y = registers.o prctl.o signal.o task_size.o
-
-USER_OBJS := $(obj-y)
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c
deleted file mode 100644
index 594d97a..0000000
--- a/arch/um/os-Linux/sys-x86_64/registers.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2006 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include <sys/ptrace.h>
-#define __FRAME_OFFSETS
-#include <asm/ptrace.h>
-#include "kern_constants.h"
-#include "longjmp.h"
-#include "user.h"
-
-int save_fp_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_GETFPREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-int restore_fp_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_SETFPREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-unsigned long get_thread_reg(int reg, jmp_buf *buf)
-{
- switch (reg) {
- case RIP:
- return buf[0]->__rip;
- case RSP:
- return buf[0]->__rsp;
- case RBP:
- return buf[0]->__rbp;
- default:
- printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
- reg);
- return 0;
- }
-}
-
-int get_fp_registers(int pid, unsigned long *regs)
-{
- return save_fp_registers(pid, regs);
-}
-
-int put_fp_registers(int pid, unsigned long *regs)
-{
- return restore_fp_registers(pid, regs);
-}
diff --git a/arch/um/os-Linux/sys-x86_64/signal.c b/arch/um/os-Linux/sys-x86_64/signal.c
deleted file mode 100644
index 82a3888..0000000
--- a/arch/um/os-Linux/sys-x86_64/signal.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2006 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-
-extern void handle_signal(int sig, struct sigcontext *sc);
-
-void hard_handler(int sig)
-{
- struct ucontext *uc;
- asm("movq %%rdx, %0" : "=r" (uc));
-
- handle_signal(sig, (struct sigcontext *) &uc->uc_mcontext);
-}
diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c
deleted file mode 100644
index 26a0dd1..0000000
--- a/arch/um/os-Linux/sys-x86_64/task_size.c
+++ /dev/null
@@ -1,5 +0,0 @@
-unsigned long os_get_top_address(unsigned long shift)
-{
- /* The old value of CONFIG_TOP_ADDR */
- return 0x7fc0000000;
-}
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index 6e3359d..910499d 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -8,11 +8,9 @@
#include <signal.h>
#include <time.h>
#include <sys/time.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
-#include "process.h"
-#include "user.h"
+#include "internal.h"
int set_interval(void)
{
diff --git a/arch/um/os-Linux/tls.c b/arch/um/os-Linux/tls.c
deleted file mode 100644
index 73277801..0000000
--- a/arch/um/os-Linux/tls.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <errno.h>
-#include <sys/ptrace.h>
-#include "sysdep/tls.h"
-
-/* TLS support - we basically rely on the host's one.*/
-
-#ifndef PTRACE_GET_THREAD_AREA
-#define PTRACE_GET_THREAD_AREA 25
-#endif
-
-#ifndef PTRACE_SET_THREAD_AREA
-#define PTRACE_SET_THREAD_AREA 26
-#endif
-
-int os_set_thread_area(user_desc_t *info, int pid)
-{
- int ret;
-
- ret = ptrace(PTRACE_SET_THREAD_AREA, pid, info->entry_number,
- (unsigned long) info);
- if (ret < 0)
- ret = -errno;
- return ret;
-}
-
-int os_get_thread_area(user_desc_t *info, int pid)
-{
- int ret;
-
- ret = ptrace(PTRACE_GET_THREAD_AREA, pid, info->entry_number,
- (unsigned long) info);
- if (ret < 0)
- ret = -errno;
- return ret;
-}
diff --git a/arch/um/os-Linux/tty.c b/arch/um/os-Linux/tty.c
index b09ff66..dd12b99 100644
--- a/arch/um/os-Linux/tty.c
+++ b/arch/um/os-Linux/tty.c
@@ -7,10 +7,8 @@
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
-#include "user.h"
struct grantpt_info {
int fd;
diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c
deleted file mode 100644
index 087ed74..0000000
--- a/arch/um/os-Linux/uaccess.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <stddef.h>
-#include "longjmp.h"
-
-unsigned long __do_user_copy(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher,
- void (*op)(void *to, const void *from,
- int n), int *faulted_out)
-{
- unsigned long *faddrp = (unsigned long *) fault_addr, ret;
-
- jmp_buf jbuf;
- *fault_catcher = &jbuf;
- if (UML_SETJMP(&jbuf) == 0) {
- (*op)(to, from, n);
- ret = 0;
- *faulted_out = 0;
- }
- else {
- ret = *faddrp;
- *faulted_out = 1;
- }
- *fault_addr = NULL;
- *fault_catcher = NULL;
- return ret;
-}
-
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index a27defb..4832eb5 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -13,9 +13,7 @@
#include <unistd.h>
#include <sys/stat.h>
#include "init.h"
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
#define UML_DIR "~/.uml/"
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index 5803b18..9e3b43b 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -13,9 +13,7 @@
#include <wait.h>
#include <sys/mman.h>
#include <sys/utsname.h>
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
void stack_protections(unsigned long address)
{
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 61107b6..2eb2843 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -8,7 +8,7 @@
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
$(USER_OBJS:.o=.%): \
- c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(basetarget).o)
+ c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include user.h $(CFLAGS_$(basetarget).o)
$(USER_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
-Dunix -D__unix__ -D__$(SUBARCH)__ $(CF)
@@ -25,8 +25,3 @@
define unprofile
$(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1)))
endef
-
-ifdef subarch-obj-y
-obj-y += subarch.o
-subarch-y = $(addprefix ../../$(HEADER_ARCH)/,$(subarch-obj-y))
-endif
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
deleted file mode 100644
index 3923cfb..0000000
--- a/arch/um/sys-i386/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
-#
-
-obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
- ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \
- sys_call_table.o tls.o atomic64_cx8_32.o mem.o
-
-obj-$(CONFIG_BINFMT_ELF) += elfcore.o
-
-subarch-obj-y = lib/string_32.o
-subarch-obj-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += lib/rwsem.o
-subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module.o
-
-USER_OBJS := bugs.o ptrace_user.o fault.o
-
-USER_OBJS += user-offsets.s
-extra-y += user-offsets.s
-
-UNPROFILE_OBJS := stub_segv.o
-CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/sys-i386/asm/archparam.h b/arch/um/sys-i386/asm/archparam.h
deleted file mode 100644
index 2a18a88..0000000
--- a/arch/um/sys-i386/asm/archparam.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_ARCHPARAM_I386_H
-#define __UM_ARCHPARAM_I386_H
-
-#ifdef CONFIG_X86_PAE
-#define LAST_PKMAP 512
-#else
-#define LAST_PKMAP 1024
-#endif
-
-#endif
-
diff --git a/arch/um/sys-i386/asm/elf.h b/arch/um/sys-i386/asm/elf.h
deleted file mode 100644
index 4230555..0000000
--- a/arch/um/sys-i386/asm/elf.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-#ifndef __UM_ELF_I386_H
-#define __UM_ELF_I386_H
-
-#include <asm/user.h>
-#include "skas.h"
-
-#define R_386_NONE 0
-#define R_386_32 1
-#define R_386_PC32 2
-#define R_386_GOT32 3
-#define R_386_PLT32 4
-#define R_386_COPY 5
-#define R_386_GLOB_DAT 6
-#define R_386_JMP_SLOT 7
-#define R_386_RELATIVE 8
-#define R_386_GOTOFF 9
-#define R_386_GOTPC 10
-#define R_386_NUM 11
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
-
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_386
-
-#define ELF_PLAT_INIT(regs, load_addr) do { \
- PT_REGS_EBX(regs) = 0; \
- PT_REGS_ECX(regs) = 0; \
- PT_REGS_EDX(regs) = 0; \
- PT_REGS_ESI(regs) = 0; \
- PT_REGS_EDI(regs) = 0; \
- PT_REGS_EBP(regs) = 0; \
- PT_REGS_EAX(regs) = 0; \
-} while (0)
-
-#define ELF_EXEC_PAGESIZE 4096
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-/* Shamelessly stolen from include/asm-i386/elf.h */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
- pr_reg[0] = PT_REGS_EBX(regs); \
- pr_reg[1] = PT_REGS_ECX(regs); \
- pr_reg[2] = PT_REGS_EDX(regs); \
- pr_reg[3] = PT_REGS_ESI(regs); \
- pr_reg[4] = PT_REGS_EDI(regs); \
- pr_reg[5] = PT_REGS_EBP(regs); \
- pr_reg[6] = PT_REGS_EAX(regs); \
- pr_reg[7] = PT_REGS_DS(regs); \
- pr_reg[8] = PT_REGS_ES(regs); \
- /* fake once used fs and gs selectors? */ \
- pr_reg[9] = PT_REGS_DS(regs); \
- pr_reg[10] = PT_REGS_DS(regs); \
- pr_reg[11] = PT_REGS_SYSCALL_NR(regs); \
- pr_reg[12] = PT_REGS_IP(regs); \
- pr_reg[13] = PT_REGS_CS(regs); \
- pr_reg[14] = PT_REGS_EFLAGS(regs); \
- pr_reg[15] = PT_REGS_SP(regs); \
- pr_reg[16] = PT_REGS_SS(regs); \
-} while (0);
-
-#define task_pt_regs(t) (&(t)->thread.regs)
-
-struct task_struct;
-
-extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
-
-#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
-
-extern long elf_aux_hwcap;
-#define ELF_HWCAP (elf_aux_hwcap)
-
-extern char * elf_aux_platform;
-#define ELF_PLATFORM (elf_aux_platform)
-
-#define SET_PERSONALITY(ex) do { } while (0)
-
-extern unsigned long vsyscall_ehdr;
-extern unsigned long vsyscall_end;
-extern unsigned long __kernel_vsyscall;
-
-#define VSYSCALL_BASE vsyscall_ehdr
-#define VSYSCALL_END vsyscall_end
-
-/*
- * This is the range that is readable by user mode, and things
- * acting like user mode such as get_user_pages.
- */
-#define FIXADDR_USER_START VSYSCALL_BASE
-#define FIXADDR_USER_END VSYSCALL_END
-
-#define __HAVE_ARCH_GATE_AREA 1
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them, start the x86-specific ones at 32.
- */
-#define AT_SYSINFO 32
-#define AT_SYSINFO_EHDR 33
-
-#define ARCH_DLINFO \
-do { \
- if ( vsyscall_ehdr ) { \
- NEW_AUX_ENT(AT_SYSINFO, __kernel_vsyscall); \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, vsyscall_ehdr); \
- } \
-} while (0)
-
-#endif
diff --git a/arch/um/sys-i386/asm/module.h b/arch/um/sys-i386/asm/module.h
deleted file mode 100644
index 5ead4a0..0000000
--- a/arch/um/sys-i386/asm/module.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __UM_MODULE_I386_H
-#define __UM_MODULE_I386_H
-
-/* UML is simple */
-struct mod_arch_specific
-{
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif
diff --git a/arch/um/sys-i386/asm/processor.h b/arch/um/sys-i386/asm/processor.h
deleted file mode 100644
index 82a9061..0000000
--- a/arch/um/sys-i386/asm/processor.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_PROCESSOR_I386_H
-#define __UM_PROCESSOR_I386_H
-
-#include "linux/string.h"
-#include <sysdep/host_ldt.h>
-#include "asm/segment.h"
-
-extern int host_has_cmov;
-
-/* include faultinfo structure */
-#include "sysdep/faultinfo.h"
-
-struct uml_tls_struct {
- struct user_desc tls;
- unsigned flushed:1;
- unsigned present:1;
-};
-
-struct arch_thread {
- struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
- unsigned long debugregs[8];
- int debugregs_seq;
- struct faultinfo faultinfo;
-};
-
-#define INIT_ARCH_THREAD { \
- .tls_array = { [ 0 ... GDT_ENTRY_TLS_ENTRIES - 1 ] = \
- { .present = 0, .flushed = 0 } }, \
- .debugregs = { [ 0 ... 7 ] = 0 }, \
- .debugregs_seq = 0, \
- .faultinfo = { 0, 0, 0 } \
-}
-
-static inline void arch_flush_thread(struct arch_thread *thread)
-{
- /* Clear any TLS still hanging */
- memset(&thread->tls_array, 0, sizeof(thread->tls_array));
-}
-
-static inline void arch_copy_thread(struct arch_thread *from,
- struct arch_thread *to)
-{
- memcpy(&to->tls_array, &from->tls_array, sizeof(from->tls_array));
-}
-
-#include <asm/user.h>
-
-/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-static inline void rep_nop(void)
-{
- __asm__ __volatile__("rep;nop": : :"memory");
-}
-
-#define cpu_relax() rep_nop()
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter"). Stolen
- * from asm-i386/processor.h
- */
-#define current_text_addr() \
- ({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
-
-#define ARCH_IS_STACKGROW(address) \
- (address + 32 >= UPT_SP(¤t->thread.regs.regs))
-
-#define KSTK_EIP(tsk) KSTK_REG(tsk, EIP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, UESP)
-#define KSTK_EBP(tsk) KSTK_REG(tsk, EBP)
-
-#include "asm/processor-generic.h"
-
-#endif
diff --git a/arch/um/sys-i386/atomic64_cx8_32.S b/arch/um/sys-i386/atomic64_cx8_32.S
deleted file mode 100644
index 1e901d3..0000000
--- a/arch/um/sys-i386/atomic64_cx8_32.S
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * atomic64_t for 586+
- *
- * Copied from arch/x86/lib/atomic64_cx8_32.S
- *
- * Copyright © 2010 Luca Barbieri
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
-
-.macro SAVE reg
- pushl_cfi %\reg
- CFI_REL_OFFSET \reg, 0
-.endm
-
-.macro RESTORE reg
- popl_cfi %\reg
- CFI_RESTORE \reg
-.endm
-
-.macro read64 reg
- movl %ebx, %eax
- movl %ecx, %edx
-/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */
- LOCK_PREFIX
- cmpxchg8b (\reg)
-.endm
-
-ENTRY(atomic64_read_cx8)
- CFI_STARTPROC
-
- read64 %ecx
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_read_cx8)
-
-ENTRY(atomic64_set_cx8)
- CFI_STARTPROC
-
-1:
-/* we don't need LOCK_PREFIX since aligned 64-bit writes
- * are atomic on 586 and newer */
- cmpxchg8b (%esi)
- jne 1b
-
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_set_cx8)
-
-ENTRY(atomic64_xchg_cx8)
- CFI_STARTPROC
-
- movl %ebx, %eax
- movl %ecx, %edx
-1:
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_xchg_cx8)
-
-.macro addsub_return func ins insc
-ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- SAVE ebp
- SAVE ebx
- SAVE esi
- SAVE edi
-
- movl %eax, %esi
- movl %edx, %edi
- movl %ecx, %ebp
-
- read64 %ebp
-1:
- movl %eax, %ebx
- movl %edx, %ecx
- \ins\()l %esi, %ebx
- \insc\()l %edi, %ecx
- LOCK_PREFIX
- cmpxchg8b (%ebp)
- jne 1b
-
-10:
- movl %ebx, %eax
- movl %ecx, %edx
- RESTORE edi
- RESTORE esi
- RESTORE ebx
- RESTORE ebp
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_\func\()_return_cx8)
-.endm
-
-addsub_return add add adc
-addsub_return sub sub sbb
-
-.macro incdec_return func ins insc
-ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- SAVE ebx
-
- read64 %esi
-1:
- movl %eax, %ebx
- movl %edx, %ecx
- \ins\()l $1, %ebx
- \insc\()l $0, %ecx
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
-10:
- movl %ebx, %eax
- movl %ecx, %edx
- RESTORE ebx
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_\func\()_return_cx8)
-.endm
-
-incdec_return inc add adc
-incdec_return dec sub sbb
-
-ENTRY(atomic64_dec_if_positive_cx8)
- CFI_STARTPROC
- SAVE ebx
-
- read64 %esi
-1:
- movl %eax, %ebx
- movl %edx, %ecx
- subl $1, %ebx
- sbb $0, %ecx
- js 2f
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
-2:
- movl %ebx, %eax
- movl %ecx, %edx
- RESTORE ebx
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_dec_if_positive_cx8)
-
-ENTRY(atomic64_add_unless_cx8)
- CFI_STARTPROC
- SAVE ebp
- SAVE ebx
-/* these just push these two parameters on the stack */
- SAVE edi
- SAVE esi
-
- movl %ecx, %ebp
- movl %eax, %esi
- movl %edx, %edi
-
- read64 %ebp
-1:
- cmpl %eax, 0(%esp)
- je 4f
-2:
- movl %eax, %ebx
- movl %edx, %ecx
- addl %esi, %ebx
- adcl %edi, %ecx
- LOCK_PREFIX
- cmpxchg8b (%ebp)
- jne 1b
-
- movl $1, %eax
-3:
- addl $8, %esp
- CFI_ADJUST_CFA_OFFSET -8
- RESTORE ebx
- RESTORE ebp
- ret
-4:
- cmpl %edx, 4(%esp)
- jne 2b
- xorl %eax, %eax
- jmp 3b
- CFI_ENDPROC
-ENDPROC(atomic64_add_unless_cx8)
-
-ENTRY(atomic64_inc_not_zero_cx8)
- CFI_STARTPROC
- SAVE ebx
-
- read64 %esi
-1:
- testl %eax, %eax
- je 4f
-2:
- movl %eax, %ebx
- movl %edx, %ecx
- addl $1, %ebx
- adcl $0, %ecx
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
- movl $1, %eax
-3:
- RESTORE ebx
- ret
-4:
- testl %edx, %edx
- jne 2b
- jmp 3b
- CFI_ENDPROC
-ENDPROC(atomic64_inc_not_zero_cx8)
diff --git a/arch/um/sys-i386/bug.c b/arch/um/sys-i386/bug.c
deleted file mode 100644
index 8d4f273..0000000
--- a/arch/um/sys-i386/bug.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL V2
- */
-
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-/* Mostly copied from i386/x86_86 - eliminated the eip < PAGE_OFFSET because
- * that's not relevant in skas mode.
- */
-
-int is_valid_bugaddr(unsigned long eip)
-{
- unsigned short ud2;
-
- if (probe_kernel_address((unsigned short __user *)eip, ud2))
- return 0;
-
- return ud2 == 0x0b0f;
-}
diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c
deleted file mode 100644
index 2c6d0d7..0000000
--- a/arch/um/sys-i386/bugs.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-#include "kern_constants.h"
-#include "kern_util.h"
-#include "longjmp.h"
-#include "task.h"
-#include "user.h"
-#include "sysdep/ptrace.h"
-
-/* Set during early boot */
-static int host_has_cmov = 1;
-static jmp_buf cmov_test_return;
-
-static void cmov_sigill_test_handler(int sig)
-{
- host_has_cmov = 0;
- longjmp(cmov_test_return, 1);
-}
-
-void arch_check_bugs(void)
-{
- struct sigaction old, new;
-
- printk(UM_KERN_INFO "Checking for host processor cmov support...");
- new.sa_handler = cmov_sigill_test_handler;
-
- /* Make sure that SIGILL is enabled after the handler longjmps back */
- new.sa_flags = SA_NODEFER;
- sigemptyset(&new.sa_mask);
- sigaction(SIGILL, &new, &old);
-
- if (setjmp(cmov_test_return) == 0) {
- unsigned long foo = 0;
- __asm__ __volatile__("cmovz %0, %1" : "=r" (foo) : "0" (foo));
- printk(UM_KERN_CONT "Yes\n");
- } else
- printk(UM_KERN_CONT "No\n");
-
- sigaction(SIGILL, &old, &new);
-}
-
-void arch_examine_signal(int sig, struct uml_pt_regs *regs)
-{
- unsigned char tmp[2];
-
- /*
- * This is testing for a cmov (0x0f 0x4x) instruction causing a
- * SIGILL in init.
- */
- if ((sig != SIGILL) || (TASK_PID(get_current()) != 1))
- return;
-
- if (copy_from_user_proc(tmp, (void *) UPT_IP(regs), 2)) {
- printk(UM_KERN_ERR "SIGILL in init, could not read "
- "instructions!\n");
- return;
- }
-
- if ((tmp[0] != 0x0f) || ((tmp[1] & 0xf0) != 0x40))
- return;
-
- if (host_has_cmov == 0)
- printk(UM_KERN_ERR "SIGILL caused by cmov, which this "
- "processor doesn't implement. Boot a filesystem "
- "compiled for older processors");
- else if (host_has_cmov == 1)
- printk(UM_KERN_ERR "SIGILL caused by cmov, which this "
- "processor claims to implement");
- else
- printk(UM_KERN_ERR "Bad value for host_has_cmov (%d)",
- host_has_cmov);
-}
diff --git a/arch/um/sys-i386/ksyms.c b/arch/um/sys-i386/ksyms.c
deleted file mode 100644
index bfbefd3..0000000
--- a/arch/um/sys-i386/ksyms.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "linux/module.h"
-#include "asm/checksum.h"
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
deleted file mode 100644
index 3f2bf20..0000000
--- a/arch/um/sys-i386/ldt.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <asm/unistd.h>
-#include "os.h"
-#include "proc_mm.h"
-#include "skas.h"
-#include "skas_ptrace.h"
-#include "sysdep/tls.h"
-
-extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
-
-static long write_ldt_entry(struct mm_id *mm_idp, int func,
- struct user_desc *desc, void **addr, int done)
-{
- long res;
-
- if (proc_mm) {
- /*
- * This is a special handling for the case, that the mm to
- * modify isn't current->active_mm.
- * If this is called directly by modify_ldt,
- * (current->active_mm->context.skas.u == mm_idp)
- * will be true. So no call to __switch_mm(mm_idp) is done.
- * If this is called in case of init_new_ldt or PTRACE_LDT,
- * mm_idp won't belong to current->active_mm, but child->mm.
- * So we need to switch child's mm into our userspace, then
- * later switch back.
- *
- * Note: I'm unsure: should interrupts be disabled here?
- */
- if (!current->active_mm || current->active_mm == &init_mm ||
- mm_idp != ¤t->active_mm->context.id)
- __switch_mm(mm_idp);
- }
-
- if (ptrace_ldt) {
- struct ptrace_ldt ldt_op = (struct ptrace_ldt) {
- .func = func,
- .ptr = desc,
- .bytecount = sizeof(*desc)};
- u32 cpu;
- int pid;
-
- if (!proc_mm)
- pid = mm_idp->u.pid;
- else {
- cpu = get_cpu();
- pid = userspace_pid[cpu];
- }
-
- res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op);
-
- if (proc_mm)
- put_cpu();
- }
- else {
- void *stub_addr;
- res = syscall_stub_data(mm_idp, (unsigned long *)desc,
- (sizeof(*desc) + sizeof(long) - 1) &
- ~(sizeof(long) - 1),
- addr, &stub_addr);
- if (!res) {
- unsigned long args[] = { func,
- (unsigned long)stub_addr,
- sizeof(*desc),
- 0, 0, 0 };
- res = run_syscall_stub(mm_idp, __NR_modify_ldt, args,
- 0, addr, done);
- }
- }
-
- if (proc_mm) {
- /*
- * This is the second part of special handling, that makes
- * PTRACE_LDT possible to implement.
- */
- if (current->active_mm && current->active_mm != &init_mm &&
- mm_idp != ¤t->active_mm->context.id)
- __switch_mm(¤t->active_mm->context.id);
- }
-
- return res;
-}
-
-static long read_ldt_from_host(void __user * ptr, unsigned long bytecount)
-{
- int res, n;
- struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) {
- .func = 0,
- .bytecount = bytecount,
- .ptr = kmalloc(bytecount, GFP_KERNEL)};
- u32 cpu;
-
- if (ptrace_ldt.ptr == NULL)
- return -ENOMEM;
-
- /*
- * This is called from sys_modify_ldt only, so userspace_pid gives
- * us the right number
- */
-
- cpu = get_cpu();
- res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt);
- put_cpu();
- if (res < 0)
- goto out;
-
- n = copy_to_user(ptr, ptrace_ldt.ptr, res);
- if (n != 0)
- res = -EFAULT;
-
- out:
- kfree(ptrace_ldt.ptr);
-
- return res;
-}
-
-/*
- * In skas mode, we hold our own ldt data in UML.
- * Thus, the code implementing sys_modify_ldt_skas
- * is very similar to (and mostly stolen from) sys_modify_ldt
- * for arch/i386/kernel/ldt.c
- * The routines copied and modified in part are:
- * - read_ldt
- * - read_default_ldt
- * - write_ldt
- * - sys_modify_ldt_skas
- */
-
-static int read_ldt(void __user * ptr, unsigned long bytecount)
-{
- int i, err = 0;
- unsigned long size;
- uml_ldt_t * ldt = ¤t->mm->context.ldt;
-
- if (!ldt->entry_count)
- goto out;
- if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
- bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
- err = bytecount;
-
- if (ptrace_ldt)
- return read_ldt_from_host(ptr, bytecount);
-
- mutex_lock(&ldt->lock);
- if (ldt->entry_count <= LDT_DIRECT_ENTRIES) {
- size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES;
- if (size > bytecount)
- size = bytecount;
- if (copy_to_user(ptr, ldt->u.entries, size))
- err = -EFAULT;
- bytecount -= size;
- ptr += size;
- }
- else {
- for (i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount;
- i++) {
- size = PAGE_SIZE;
- if (size > bytecount)
- size = bytecount;
- if (copy_to_user(ptr, ldt->u.pages[i], size)) {
- err = -EFAULT;
- break;
- }
- bytecount -= size;
- ptr += size;
- }
- }
- mutex_unlock(&ldt->lock);
-
- if (bytecount == 0 || err == -EFAULT)
- goto out;
-
- if (clear_user(ptr, bytecount))
- err = -EFAULT;
-
-out:
- return err;
-}
-
-static int read_default_ldt(void __user * ptr, unsigned long bytecount)
-{
- int err;
-
- if (bytecount > 5*LDT_ENTRY_SIZE)
- bytecount = 5*LDT_ENTRY_SIZE;
-
- err = bytecount;
- /*
- * UML doesn't support lcall7 and lcall27.
- * So, we don't really have a default ldt, but emulate
- * an empty ldt of common host default ldt size.
- */
- if (clear_user(ptr, bytecount))
- err = -EFAULT;
-
- return err;
-}
-
-static int write_ldt(void __user * ptr, unsigned long bytecount, int func)
-{
- uml_ldt_t * ldt = ¤t->mm->context.ldt;
- struct mm_id * mm_idp = ¤t->mm->context.id;
- int i, err;
- struct user_desc ldt_info;
- struct ldt_entry entry0, *ldt_p;
- void *addr = NULL;
-
- err = -EINVAL;
- if (bytecount != sizeof(ldt_info))
- goto out;
- err = -EFAULT;
- if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
- goto out;
-
- err = -EINVAL;
- if (ldt_info.entry_number >= LDT_ENTRIES)
- goto out;
- if (ldt_info.contents == 3) {
- if (func == 1)
- goto out;
- if (ldt_info.seg_not_present == 0)
- goto out;
- }
-
- if (!ptrace_ldt)
- mutex_lock(&ldt->lock);
-
- err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1);
- if (err)
- goto out_unlock;
- else if (ptrace_ldt) {
- /* With PTRACE_LDT available, this is used as a flag only */
- ldt->entry_count = 1;
- goto out;
- }
-
- if (ldt_info.entry_number >= ldt->entry_count &&
- ldt_info.entry_number >= LDT_DIRECT_ENTRIES) {
- for (i=ldt->entry_count/LDT_ENTRIES_PER_PAGE;
- i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number;
- i++) {
- if (i == 0)
- memcpy(&entry0, ldt->u.entries,
- sizeof(entry0));
- ldt->u.pages[i] = (struct ldt_entry *)
- __get_free_page(GFP_KERNEL|__GFP_ZERO);
- if (!ldt->u.pages[i]) {
- err = -ENOMEM;
- /* Undo the change in host */
- memset(&ldt_info, 0, sizeof(ldt_info));
- write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1);
- goto out_unlock;
- }
- if (i == 0) {
- memcpy(ldt->u.pages[0], &entry0,
- sizeof(entry0));
- memcpy(ldt->u.pages[0]+1, ldt->u.entries+1,
- sizeof(entry0)*(LDT_DIRECT_ENTRIES-1));
- }
- ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE;
- }
- }
- if (ldt->entry_count <= ldt_info.entry_number)
- ldt->entry_count = ldt_info.entry_number + 1;
-
- if (ldt->entry_count <= LDT_DIRECT_ENTRIES)
- ldt_p = ldt->u.entries + ldt_info.entry_number;
- else
- ldt_p = ldt->u.pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] +
- ldt_info.entry_number%LDT_ENTRIES_PER_PAGE;
-
- if (ldt_info.base_addr == 0 && ldt_info.limit == 0 &&
- (func == 1 || LDT_empty(&ldt_info))) {
- ldt_p->a = 0;
- ldt_p->b = 0;
- }
- else{
- if (func == 1)
- ldt_info.useable = 0;
- ldt_p->a = LDT_entry_a(&ldt_info);
- ldt_p->b = LDT_entry_b(&ldt_info);
- }
- err = 0;
-
-out_unlock:
- mutex_unlock(&ldt->lock);
-out:
- return err;
-}
-
-static long do_modify_ldt_skas(int func, void __user *ptr,
- unsigned long bytecount)
-{
- int ret = -ENOSYS;
-
- switch (func) {
- case 0:
- ret = read_ldt(ptr, bytecount);
- break;
- case 1:
- case 0x11:
- ret = write_ldt(ptr, bytecount, func);
- break;
- case 2:
- ret = read_default_ldt(ptr, bytecount);
- break;
- }
- return ret;
-}
-
-static DEFINE_SPINLOCK(host_ldt_lock);
-static short dummy_list[9] = {0, -1};
-static short * host_ldt_entries = NULL;
-
-static void ldt_get_host_info(void)
-{
- long ret;
- struct ldt_entry * ldt;
- short *tmp;
- int i, size, k, order;
-
- spin_lock(&host_ldt_lock);
-
- if (host_ldt_entries != NULL) {
- spin_unlock(&host_ldt_lock);
- return;
- }
- host_ldt_entries = dummy_list+1;
-
- spin_unlock(&host_ldt_lock);
-
- for (i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++)
- ;
-
- ldt = (struct ldt_entry *)
- __get_free_pages(GFP_KERNEL|__GFP_ZERO, order);
- if (ldt == NULL) {
- printk(KERN_ERR "ldt_get_host_info: couldn't allocate buffer "
- "for host ldt\n");
- return;
- }
-
- ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE);
- if (ret < 0) {
- printk(KERN_ERR "ldt_get_host_info: couldn't read host ldt\n");
- goto out_free;
- }
- if (ret == 0) {
- /* default_ldt is active, simply write an empty entry 0 */
- host_ldt_entries = dummy_list;
- goto out_free;
- }
-
- for (i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++) {
- if (ldt[i].a != 0 || ldt[i].b != 0)
- size++;
- }
-
- if (size < ARRAY_SIZE(dummy_list))
- host_ldt_entries = dummy_list;
- else {
- size = (size + 1) * sizeof(dummy_list[0]);
- tmp = kmalloc(size, GFP_KERNEL);
- if (tmp == NULL) {
- printk(KERN_ERR "ldt_get_host_info: couldn't allocate "
- "host ldt list\n");
- goto out_free;
- }
- host_ldt_entries = tmp;
- }
-
- for (i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++) {
- if (ldt[i].a != 0 || ldt[i].b != 0)
- host_ldt_entries[k++] = i;
- }
- host_ldt_entries[k] = -1;
-
-out_free:
- free_pages((unsigned long)ldt, order);
-}
-
-long init_new_ldt(struct mm_context *new_mm, struct mm_context *from_mm)
-{
- struct user_desc desc;
- short * num_p;
- int i;
- long page, err=0;
- void *addr = NULL;
- struct proc_mm_op copy;
-
-
- if (!ptrace_ldt)
- mutex_init(&new_mm->ldt.lock);
-
- if (!from_mm) {
- memset(&desc, 0, sizeof(desc));
- /*
- * We have to initialize a clean ldt.
- */
- if (proc_mm) {
- /*
- * If the new mm was created using proc_mm, host's
- * default-ldt currently is assigned, which normally
- * contains the call-gates for lcall7 and lcall27.
- * To remove these gates, we simply write an empty
- * entry as number 0 to the host.
- */
- err = write_ldt_entry(&new_mm->id, 1, &desc, &addr, 1);
- }
- else{
- /*
- * Now we try to retrieve info about the ldt, we
- * inherited from the host. All ldt-entries found
- * will be reset in the following loop
- */
- ldt_get_host_info();
- for (num_p=host_ldt_entries; *num_p != -1; num_p++) {
- desc.entry_number = *num_p;
- err = write_ldt_entry(&new_mm->id, 1, &desc,
- &addr, *(num_p + 1) == -1);
- if (err)
- break;
- }
- }
- new_mm->ldt.entry_count = 0;
-
- goto out;
- }
-
- if (proc_mm) {
- /*
- * We have a valid from_mm, so we now have to copy the LDT of
- * from_mm to new_mm, because using proc_mm an new mm with
- * an empty/default LDT was created in new_mm()
- */
- copy = ((struct proc_mm_op) { .op = MM_COPY_SEGMENTS,
- .u =
- { .copy_segments =
- from_mm->id.u.mm_fd } } );
- i = os_write_file(new_mm->id.u.mm_fd, ©, sizeof(copy));
- if (i != sizeof(copy))
- printk(KERN_ERR "new_mm : /proc/mm copy_segments "
- "failed, err = %d\n", -i);
- }
-
- if (!ptrace_ldt) {
- /*
- * Our local LDT is used to supply the data for
- * modify_ldt(READLDT), if PTRACE_LDT isn't available,
- * i.e., we have to use the stub for modify_ldt, which
- * can't handle the big read buffer of up to 64kB.
- */
- mutex_lock(&from_mm->ldt.lock);
- if (from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES)
- memcpy(new_mm->ldt.u.entries, from_mm->ldt.u.entries,
- sizeof(new_mm->ldt.u.entries));
- else {
- i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
- while (i-->0) {
- page = __get_free_page(GFP_KERNEL|__GFP_ZERO);
- if (!page) {
- err = -ENOMEM;
- break;
- }
- new_mm->ldt.u.pages[i] =
- (struct ldt_entry *) page;
- memcpy(new_mm->ldt.u.pages[i],
- from_mm->ldt.u.pages[i], PAGE_SIZE);
- }
- }
- new_mm->ldt.entry_count = from_mm->ldt.entry_count;
- mutex_unlock(&from_mm->ldt.lock);
- }
-
- out:
- return err;
-}
-
-
-void free_ldt(struct mm_context *mm)
-{
- int i;
-
- if (!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES) {
- i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
- while (i-- > 0)
- free_page((long) mm->ldt.u.pages[i]);
- }
- mm->ldt.entry_count = 0;
-}
-
-int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
-{
- return do_modify_ldt_skas(func, ptr, bytecount);
-}
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
deleted file mode 100644
index 3375c27..0000000
--- a/arch/um/sys-i386/ptrace.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include "linux/mm.h"
-#include "linux/sched.h"
-#include "asm/uaccess.h"
-#include "skas.h"
-
-extern int arch_switch_tls(struct task_struct *to);
-
-void arch_switch_to(struct task_struct *to)
-{
- int err = arch_switch_tls(to);
- if (!err)
- return;
-
- if (err != -EINVAL)
- printk(KERN_WARNING "arch_switch_tls failed, errno %d, "
- "not EINVAL\n", -err);
- else
- printk(KERN_WARNING "arch_switch_tls failed, errno = EINVAL\n");
-}
-
-int is_syscall(unsigned long addr)
-{
- unsigned short instr;
- int n;
-
- n = copy_from_user(&instr, (void __user *) addr, sizeof(instr));
- if (n) {
- /* access_process_vm() grants access to vsyscall and stub,
- * while copy_from_user doesn't. Maybe access_process_vm is
- * slow, but that doesn't matter, since it will be called only
- * in case of singlestepping, if copy_from_user failed.
- */
- n = access_process_vm(current, addr, &instr, sizeof(instr), 0);
- if (n != sizeof(instr)) {
- printk(KERN_ERR "is_syscall : failed to read "
- "instruction from 0x%lx\n", addr);
- return 1;
- }
- }
- /* int 0x80 or sysenter */
- return (instr == 0x80cd) || (instr == 0x340f);
-}
-
-/* determines which flags the user has access to. */
-/* 1 = access 0 = no access */
-#define FLAG_MASK 0x00044dd5
-
-int putreg(struct task_struct *child, int regno, unsigned long value)
-{
- regno >>= 2;
- switch (regno) {
- case FS:
- if (value && (value & 3) != 3)
- return -EIO;
- PT_REGS_FS(&child->thread.regs) = value;
- return 0;
- case GS:
- if (value && (value & 3) != 3)
- return -EIO;
- PT_REGS_GS(&child->thread.regs) = value;
- return 0;
- case DS:
- case ES:
- if (value && (value & 3) != 3)
- return -EIO;
- value &= 0xffff;
- break;
- case SS:
- case CS:
- if ((value & 3) != 3)
- return -EIO;
- value &= 0xffff;
- break;
- case EFL:
- value &= FLAG_MASK;
- value |= PT_REGS_EFLAGS(&child->thread.regs);
- break;
- }
- PT_REGS_SET(&child->thread.regs, regno, value);
- return 0;
-}
-
-int poke_user(struct task_struct *child, long addr, long data)
-{
- if ((addr & 3) || addr < 0)
- return -EIO;
-
- if (addr < MAX_REG_OFFSET)
- return putreg(child, addr, data);
- else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))) {
- addr -= offsetof(struct user, u_debugreg[0]);
- addr = addr >> 2;
- if ((addr == 4) || (addr == 5))
- return -EIO;
- child->thread.arch.debugregs[addr] = data;
- return 0;
- }
- return -EIO;
-}
-
-unsigned long getreg(struct task_struct *child, int regno)
-{
- unsigned long retval = ~0UL;
-
- regno >>= 2;
- switch (regno) {
- case FS:
- case GS:
- case DS:
- case ES:
- case SS:
- case CS:
- retval = 0xffff;
- /* fall through */
- default:
- retval &= PT_REG(&child->thread.regs, regno);
- }
- return retval;
-}
-
-/* read the word at location addr in the USER area. */
-int peek_user(struct task_struct *child, long addr, long data)
-{
- unsigned long tmp;
-
- if ((addr & 3) || addr < 0)
- return -EIO;
-
- tmp = 0; /* Default return condition */
- if (addr < MAX_REG_OFFSET) {
- tmp = getreg(child, addr);
- }
- else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))) {
- addr -= offsetof(struct user, u_debugreg[0]);
- addr = addr >> 2;
- tmp = child->thread.arch.debugregs[addr];
- }
- return put_user(tmp, (unsigned long __user *) data);
-}
-
-static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
-{
- int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- struct user_i387_struct fpregs;
-
- err = save_fp_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
- if (err)
- return err;
-
- n = copy_to_user(buf, &fpregs, sizeof(fpregs));
- if(n > 0)
- return -EFAULT;
-
- return n;
-}
-
-static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
-{
- int n, cpu = ((struct thread_info *) child->stack)->cpu;
- struct user_i387_struct fpregs;
-
- n = copy_from_user(&fpregs, buf, sizeof(fpregs));
- if (n > 0)
- return -EFAULT;
-
- return restore_fp_registers(userspace_pid[cpu],
- (unsigned long *) &fpregs);
-}
-
-static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
-{
- int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- struct user_fxsr_struct fpregs;
-
- err = save_fpx_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
- if (err)
- return err;
-
- n = copy_to_user(buf, &fpregs, sizeof(fpregs));
- if(n > 0)
- return -EFAULT;
-
- return n;
-}
-
-static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
-{
- int n, cpu = ((struct thread_info *) child->stack)->cpu;
- struct user_fxsr_struct fpregs;
-
- n = copy_from_user(&fpregs, buf, sizeof(fpregs));
- if (n > 0)
- return -EFAULT;
-
- return restore_fpx_registers(userspace_pid[cpu],
- (unsigned long *) &fpregs);
-}
-
-long subarch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- int ret = -EIO;
- void __user *datap = (void __user *) data;
- switch (request) {
- case PTRACE_GETFPREGS: /* Get the child FPU state. */
- ret = get_fpregs(datap, child);
- break;
- case PTRACE_SETFPREGS: /* Set the child FPU state. */
- ret = set_fpregs(datap, child);
- break;
- case PTRACE_GETFPXREGS: /* Get the child FPU state. */
- ret = get_fpxregs(datap, child);
- break;
- case PTRACE_SETFPXREGS: /* Set the child FPU state. */
- ret = set_fpxregs(datap, child);
- break;
- default:
- ret = -EIO;
- }
- return ret;
-}
diff --git a/arch/um/sys-i386/ptrace_user.c b/arch/um/sys-i386/ptrace_user.c
deleted file mode 100644
index 0b10c3e..0000000
--- a/arch/um/sys-i386/ptrace_user.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include <sys/ptrace.h>
-
-int ptrace_getregs(long pid, unsigned long *regs_out)
-{
- if (ptrace(PTRACE_GETREGS, pid, 0, regs_out) < 0)
- return -errno;
- return 0;
-}
-
-int ptrace_setregs(long pid, unsigned long *regs)
-{
- if (ptrace(PTRACE_SETREGS, pid, 0, regs) < 0)
- return -errno;
- return 0;
-}
diff --git a/arch/um/sys-i386/shared/sysdep/barrier.h b/arch/um/sys-i386/shared/sysdep/barrier.h
deleted file mode 100644
index b58d52c..0000000
--- a/arch/um/sys-i386/shared/sysdep/barrier.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __SYSDEP_I386_BARRIER_H
-#define __SYSDEP_I386_BARRIER_H
-
-/* Copied from include/asm-i386 for use by userspace. i386 has the option
- * of using mfence, but I'm just using this, which works everywhere, for now.
- */
-#define mb() asm volatile("lock; addl $0,0(%esp)")
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/checksum.h b/arch/um/sys-i386/shared/sysdep/checksum.h
deleted file mode 100644
index ed47445..0000000
--- a/arch/um/sys-i386/shared/sysdep/checksum.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Licensed under the GPL
- */
-
-#ifndef __UM_SYSDEP_CHECKSUM_H
-#define __UM_SYSDEP_CHECKSUM_H
-
-#include "linux/in6.h"
-#include "linux/string.h"
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * Note: when you get a NULL pointer exception here this means someone
- * passed in an incorrect kernel address to one of these functions.
- *
- * If you use these functions directly please don't forget the
- * access_ok().
- */
-
-static __inline__
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-static __inline__
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *err_ptr)
-{
- if (copy_from_user(dst, src, len)) {
- *err_ptr = -EFAULT;
- return (__force __wsum)-1;
- }
-
- return csum_partial(dst, len, sum);
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- * By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
- * Arnt Gulbrandsen.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- unsigned int sum;
-
- __asm__ __volatile__(
- "movl (%1), %0 ;\n"
- "subl $4, %2 ;\n"
- "jbe 2f ;\n"
- "addl 4(%1), %0 ;\n"
- "adcl 8(%1), %0 ;\n"
- "adcl 12(%1), %0 ;\n"
-"1: adcl 16(%1), %0 ;\n"
- "lea 4(%1), %1 ;\n"
- "decl %2 ;\n"
- "jne 1b ;\n"
- "adcl $0, %0 ;\n"
- "movl %0, %2 ;\n"
- "shrl $16, %0 ;\n"
- "addw %w2, %w0 ;\n"
- "adcl $0, %0 ;\n"
- "notl %0 ;\n"
-"2: ;\n"
- /* Since the input registers which are loaded with iph and ipl
- are modified, we must also specify them as outputs, or gcc
- will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl)
- : "1" (iph), "2" (ihl)
- : "memory");
- return (__force __sum16)sum;
-}
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- __asm__(
- "addl %1, %0 ;\n"
- "adcl $0xffff, %0 ;\n"
- : "=r" (sum)
- : "r" ((__force u32)sum << 16),
- "0" ((__force u32)sum & 0xffff0000)
- );
- return (__force __sum16)(~(__force u32)sum >> 16);
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
-{
- __asm__(
- "addl %1, %0 ;\n"
- "adcl %2, %0 ;\n"
- "adcl %3, %0 ;\n"
- "adcl $0, %0 ;\n"
- : "=r" (sum)
- : "g" (daddr), "g"(saddr), "g"((len + proto) << 8), "0"(sum));
- return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, unsigned short proto,
- __wsum sum)
-{
- __asm__(
- "addl 0(%1), %0 ;\n"
- "adcl 4(%1), %0 ;\n"
- "adcl 8(%1), %0 ;\n"
- "adcl 12(%1), %0 ;\n"
- "adcl 0(%2), %0 ;\n"
- "adcl 4(%2), %0 ;\n"
- "adcl 8(%2), %0 ;\n"
- "adcl 12(%2), %0 ;\n"
- "adcl %3, %0 ;\n"
- "adcl %4, %0 ;\n"
- "adcl $0, %0 ;\n"
- : "=&r" (sum)
- : "r" (saddr), "r" (daddr),
- "r"(htonl(len)), "r"(htonl(proto)), "0"(sum));
-
- return csum_fold(sum);
-}
-
-/*
- * Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-static __inline__ __wsum csum_and_copy_to_user(const void *src,
- void __user *dst,
- int len, __wsum sum, int *err_ptr)
-{
- if (access_ok(VERIFY_WRITE, dst, len)) {
- if (copy_to_user(dst, src, len)) {
- *err_ptr = -EFAULT;
- return (__force __wsum)-1;
- }
-
- return csum_partial(src, len, sum);
- }
-
- if (len)
- *err_ptr = -EFAULT;
-
- return (__force __wsum)-1; /* invalid checksum */
-}
-
-#endif
-
diff --git a/arch/um/sys-i386/shared/sysdep/faultinfo.h b/arch/um/sys-i386/shared/sysdep/faultinfo.h
deleted file mode 100644
index db437cc..0000000
--- a/arch/um/sys-i386/shared/sysdep/faultinfo.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- * Licensed under the GPL
- */
-
-#ifndef __FAULTINFO_I386_H
-#define __FAULTINFO_I386_H
-
-/* this structure contains the full arch-specific faultinfo
- * from the traps.
- * On i386, ptrace_faultinfo unfortunately doesn't provide
- * all the info, since trap_no is missing.
- * All common elements are defined at the same position in
- * both structures, thus making it easy to copy the
- * contents without knowledge about the structure elements.
- */
-struct faultinfo {
- int error_code; /* in ptrace_faultinfo misleadingly called is_write */
- unsigned long cr2; /* in ptrace_faultinfo called addr */
- int trap_no; /* missing in ptrace_faultinfo */
-};
-
-#define FAULT_WRITE(fi) ((fi).error_code & 2)
-#define FAULT_ADDRESS(fi) ((fi).cr2)
-
-#define PTRACE_FULL_FAULTINFO 0
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/host_ldt.h b/arch/um/sys-i386/shared/sysdep/host_ldt.h
deleted file mode 100644
index 0953cc4..0000000
--- a/arch/um/sys-i386/shared/sysdep/host_ldt.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_HOST_LDT_I386_H
-#define __ASM_HOST_LDT_I386_H
-
-#include <asm/ldt.h>
-
-/*
- * macros stolen from include/asm-i386/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 )
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h
deleted file mode 100644
index c398a50..0000000
--- a/arch/um/sys-i386/shared/sysdep/ptrace.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_I386_PTRACE_H
-#define __SYSDEP_I386_PTRACE_H
-
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-
-static inline void update_debugregs(int seq) {}
-
-/* syscall emulation path in ptrace */
-
-#ifndef PTRACE_SYSEMU
-#define PTRACE_SYSEMU 31
-#endif
-
-void set_using_sysemu(int value);
-int get_using_sysemu(void);
-extern int sysemu_supported;
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_EAX(r) ((r)[HOST_EAX])
-#define REGS_EBX(r) ((r)[HOST_EBX])
-#define REGS_ECX(r) ((r)[HOST_ECX])
-#define REGS_EDX(r) ((r)[HOST_EDX])
-#define REGS_ESI(r) ((r)[HOST_ESI])
-#define REGS_EDI(r) ((r)[HOST_EDI])
-#define REGS_EBP(r) ((r)[HOST_EBP])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_SS(r) ((r)[HOST_SS])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#ifndef PTRACE_SYSEMU_SINGLESTEP
-#define PTRACE_SYSEMU_SINGLESTEP 32
-#endif
-
-struct uml_pt_regs {
- unsigned long gp[MAX_REG_NR];
- unsigned long fp[HOST_FPX_SIZE];
- struct faultinfo faultinfo;
- long syscall;
- int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_EAX(r) REGS_EAX((r)->gp)
-#define UPT_EBX(r) REGS_EBX((r)->gp)
-#define UPT_ECX(r) REGS_ECX((r)->gp)
-#define UPT_EDX(r) REGS_EDX((r)->gp)
-#define UPT_ESI(r) REGS_ESI((r)->gp)
-#define UPT_EDI(r) REGS_EDI((r)->gp)
-#define UPT_EBP(r) REGS_EBP((r)->gp)
-#define UPT_ORIG_EAX(r) ((r)->syscall)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-
-#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
-#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
-#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
-#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
-#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-struct syscall_args {
- unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
- { .args = { UPT_SYSCALL_ARG1(r), \
- UPT_SYSCALL_ARG2(r), \
- UPT_SYSCALL_ARG3(r), \
- UPT_SYSCALL_ARG4(r), \
- UPT_SYSCALL_ARG5(r), \
- UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
- ({ unsigned long val; \
- switch(reg){ \
- case EIP: val = UPT_IP(regs); break; \
- case UESP: val = UPT_SP(regs); break; \
- case EAX: val = UPT_EAX(regs); break; \
- case EBX: val = UPT_EBX(regs); break; \
- case ECX: val = UPT_ECX(regs); break; \
- case EDX: val = UPT_EDX(regs); break; \
- case ESI: val = UPT_ESI(regs); break; \
- case EDI: val = UPT_EDI(regs); break; \
- case EBP: val = UPT_EBP(regs); break; \
- case ORIG_EAX: val = UPT_ORIG_EAX(regs); break; \
- case CS: val = UPT_CS(regs); break; \
- case SS: val = UPT_SS(regs); break; \
- case DS: val = UPT_DS(regs); break; \
- case ES: val = UPT_ES(regs); break; \
- case FS: val = UPT_FS(regs); break; \
- case GS: val = UPT_GS(regs); break; \
- case EFL: val = UPT_EFLAGS(regs); break; \
- default : \
- panic("Bad register in UPT_REG : %d\n", reg); \
- val = -1; \
- } \
- val; \
- })
-
-#define UPT_SET(regs, reg, val) \
- do { \
- switch(reg){ \
- case EIP: UPT_IP(regs) = val; break; \
- case UESP: UPT_SP(regs) = val; break; \
- case EAX: UPT_EAX(regs) = val; break; \
- case EBX: UPT_EBX(regs) = val; break; \
- case ECX: UPT_ECX(regs) = val; break; \
- case EDX: UPT_EDX(regs) = val; break; \
- case ESI: UPT_ESI(regs) = val; break; \
- case EDI: UPT_EDI(regs) = val; break; \
- case EBP: UPT_EBP(regs) = val; break; \
- case ORIG_EAX: UPT_ORIG_EAX(regs) = val; break; \
- case CS: UPT_CS(regs) = val; break; \
- case SS: UPT_SS(regs) = val; break; \
- case DS: UPT_DS(regs) = val; break; \
- case ES: UPT_ES(regs) = val; break; \
- case FS: UPT_FS(regs) = val; break; \
- case GS: UPT_GS(regs) = val; break; \
- case EFL: UPT_EFLAGS(regs) = val; break; \
- default : \
- panic("Bad register in UPT_SET : %d\n", reg); \
- break; \
- } \
- } while (0)
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
- REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
-#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
-#define UPT_SYSCALL_RET(r) UPT_EAX(r)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-extern void arch_init_registers(int pid);
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace_user.h b/arch/um/sys-i386/shared/sysdep/ptrace_user.h
deleted file mode 100644
index ef56247..0000000
--- a/arch/um/sys-i386/shared/sysdep/ptrace_user.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_I386_PTRACE_USER_H__
-#define __SYSDEP_I386_PTRACE_USER_H__
-
-#include <sys/ptrace.h>
-#include <linux/ptrace.h>
-#include <asm/ptrace.h>
-#include "user_constants.h"
-
-#define PT_OFFSET(r) ((r) * sizeof(long))
-
-#define PT_SYSCALL_NR(regs) ((regs)[ORIG_EAX])
-#define PT_SYSCALL_NR_OFFSET PT_OFFSET(ORIG_EAX)
-
-#define PT_SYSCALL_ARG1_OFFSET PT_OFFSET(EBX)
-#define PT_SYSCALL_ARG2_OFFSET PT_OFFSET(ECX)
-#define PT_SYSCALL_ARG3_OFFSET PT_OFFSET(EDX)
-#define PT_SYSCALL_ARG4_OFFSET PT_OFFSET(ESI)
-#define PT_SYSCALL_ARG5_OFFSET PT_OFFSET(EDI)
-#define PT_SYSCALL_ARG6_OFFSET PT_OFFSET(EBP)
-
-#define PT_SYSCALL_RET_OFFSET PT_OFFSET(EAX)
-
-#define REGS_SYSCALL_NR EAX /* This is used before a system call */
-#define REGS_SYSCALL_ARG1 EBX
-#define REGS_SYSCALL_ARG2 ECX
-#define REGS_SYSCALL_ARG3 EDX
-#define REGS_SYSCALL_ARG4 ESI
-#define REGS_SYSCALL_ARG5 EDI
-#define REGS_SYSCALL_ARG6 EBP
-
-#define REGS_IP_INDEX EIP
-#define REGS_SP_INDEX UESP
-
-#define PT_IP_OFFSET PT_OFFSET(EIP)
-#define PT_IP(regs) ((regs)[EIP])
-#define PT_SP_OFFSET PT_OFFSET(UESP)
-#define PT_SP(regs) ((regs)[UESP])
-
-#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
-
-#ifndef FRAME_SIZE
-#define FRAME_SIZE (17)
-#endif
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/sc.h b/arch/um/sys-i386/shared/sysdep/sc.h
deleted file mode 100644
index c57d178..0000000
--- a/arch/um/sys-i386/shared/sysdep/sc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __SYSDEP_I386_SC_H
-#define __SYSDEP_I386_SC_H
-
-#include <user_constants.h>
-
-#define SC_OFFSET(sc, field) \
- *((unsigned long *) &(((char *) (sc))[HOST_##field]))
-#define SC_FP_OFFSET(sc, field) \
- *((unsigned long *) &(((char *) (SC_FPSTATE(sc)))[HOST_##field]))
-#define SC_FP_OFFSET_PTR(sc, field, type) \
- ((type *) &(((char *) (SC_FPSTATE(sc)))[HOST_##field]))
-
-#define SC_IP(sc) SC_OFFSET(sc, SC_IP)
-#define SC_SP(sc) SC_OFFSET(sc, SC_SP)
-#define SC_FS(sc) SC_OFFSET(sc, SC_FS)
-#define SC_GS(sc) SC_OFFSET(sc, SC_GS)
-#define SC_DS(sc) SC_OFFSET(sc, SC_DS)
-#define SC_ES(sc) SC_OFFSET(sc, SC_ES)
-#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
-#define SC_CS(sc) SC_OFFSET(sc, SC_CS)
-#define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS)
-#define SC_EAX(sc) SC_OFFSET(sc, SC_EAX)
-#define SC_EBX(sc) SC_OFFSET(sc, SC_EBX)
-#define SC_ECX(sc) SC_OFFSET(sc, SC_ECX)
-#define SC_EDX(sc) SC_OFFSET(sc, SC_EDX)
-#define SC_EDI(sc) SC_OFFSET(sc, SC_EDI)
-#define SC_ESI(sc) SC_OFFSET(sc, SC_ESI)
-#define SC_EBP(sc) SC_OFFSET(sc, SC_EBP)
-#define SC_TRAPNO(sc) SC_OFFSET(sc, SC_TRAPNO)
-#define SC_ERR(sc) SC_OFFSET(sc, SC_ERR)
-#define SC_CR2(sc) SC_OFFSET(sc, SC_CR2)
-#define SC_FPSTATE(sc) SC_OFFSET(sc, SC_FPSTATE)
-#define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK)
-#define SC_FP_CW(sc) SC_FP_OFFSET(sc, SC_FP_CW)
-#define SC_FP_SW(sc) SC_FP_OFFSET(sc, SC_FP_SW)
-#define SC_FP_TAG(sc) SC_FP_OFFSET(sc, SC_FP_TAG)
-#define SC_FP_IPOFF(sc) SC_FP_OFFSET(sc, SC_FP_IPOFF)
-#define SC_FP_CSSEL(sc) SC_FP_OFFSET(sc, SC_FP_CSSEL)
-#define SC_FP_DATAOFF(sc) SC_FP_OFFSET(sc, SC_FP_DATAOFF)
-#define SC_FP_DATASEL(sc) SC_FP_OFFSET(sc, SC_FP_DATASEL)
-#define SC_FP_ST(sc) SC_FP_OFFSET_PTR(sc, SC_FP_ST, struct _fpstate)
-#define SC_FXSR_ENV(sc) SC_FP_OFFSET_PTR(sc, SC_FXSR_ENV, void)
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/sigcontext.h b/arch/um/sys-i386/shared/sysdep/sigcontext.h
deleted file mode 100644
index f583c87..0000000
--- a/arch/um/sys-i386/shared/sysdep/sigcontext.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYS_SIGCONTEXT_I386_H
-#define __SYS_SIGCONTEXT_I386_H
-
-#include "sysdep/sc.h"
-
-#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
-
-#define GET_FAULTINFO_FROM_SC(fi, sc) \
- { \
- (fi).cr2 = SC_CR2(sc); \
- (fi).error_code = SC_ERR(sc); \
- (fi).trap_no = SC_TRAPNO(sc); \
- }
-
-/* This is Page Fault */
-#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
-
-/* SKAS3 has no trap_no on i386, but get_skas_faultinfo() sets it to 0. */
-#define SEGV_MAYBE_FIXABLE(fi) ((fi)->trap_no == 0 && ptrace_faultinfo)
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/skas_ptrace.h b/arch/um/sys-i386/shared/sysdep/skas_ptrace.h
deleted file mode 100644
index e27b8a7..0000000
--- a/arch/um/sys-i386/shared/sysdep/skas_ptrace.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_I386_SKAS_PTRACE_H
-#define __SYSDEP_I386_SKAS_PTRACE_H
-
-struct ptrace_faultinfo {
- int is_write;
- unsigned long addr;
-};
-
-struct ptrace_ldt {
- int func;
- void *ptr;
- unsigned long bytecount;
-};
-
-#define PTRACE_LDT 54
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/stub.h b/arch/um/sys-i386/shared/sysdep/stub.h
deleted file mode 100644
index 977dedd..0000000
--- a/arch/um/sys-i386/shared/sysdep/stub.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_STUB_H
-#define __SYSDEP_STUB_H
-
-#include <sys/mman.h>
-#include <asm/ptrace.h>
-#include <asm/unistd.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
-
-#define STUB_SYSCALL_RET EAX
-#define STUB_MMAP_NR __NR_mmap2
-#define MMAP_OFFSET(o) ((o) >> UM_KERN_PAGE_SHIFT)
-
-static inline long stub_syscall0(long syscall)
-{
- long ret;
-
- __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
-
- return ret;
-}
-
-static inline long stub_syscall1(long syscall, long arg1)
-{
- long ret;
-
- __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
-
- return ret;
-}
-
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
-{
- long ret;
-
- __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
- "c" (arg2));
-
- return ret;
-}
-
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
-{
- long ret;
-
- __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
- "c" (arg2), "d" (arg3));
-
- return ret;
-}
-
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
- long arg4)
-{
- long ret;
-
- __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
- "c" (arg2), "d" (arg3), "S" (arg4));
-
- return ret;
-}
-
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
- long arg4, long arg5)
-{
- long ret;
-
- __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
- "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
-
- return ret;
-}
-
-static inline void trap_myself(void)
-{
- __asm("int3");
-}
-
-static inline void remap_stack(int fd, unsigned long offset)
-{
- __asm__ volatile ("movl %%eax,%%ebp ; movl %0,%%eax ; int $0x80 ;"
- "movl %7, %%ebx ; movl %%eax, (%%ebx)"
- : : "g" (STUB_MMAP_NR), "b" (STUB_DATA),
- "c" (UM_KERN_PAGE_SIZE),
- "d" (PROT_READ | PROT_WRITE),
- "S" (MAP_FIXED | MAP_SHARED), "D" (fd),
- "a" (offset),
- "i" (&((struct stub_data *) STUB_DATA)->err)
- : "memory");
-}
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/system.h b/arch/um/sys-i386/shared/sysdep/system.h
deleted file mode 100644
index d1b93c4..0000000
--- a/arch/um/sys-i386/shared/sysdep/system.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-extern unsigned long arch_align_stack(unsigned long sp);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() asm volatile("mfence":::"memory")
-#define rmb() asm volatile("lfence":::"memory")
-#define wmb() asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb() rmb()
-#else
-# define smp_rmb() barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() wmb()
-#else
-# define smp_wmb() barrier()
-#endif
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
- alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
- alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/tls.h b/arch/um/sys-i386/shared/sysdep/tls.h
deleted file mode 100644
index 3455075..0000000
--- a/arch/um/sys-i386/shared/sysdep/tls.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _SYSDEP_TLS_H
-#define _SYSDEP_TLS_H
-
-# ifndef __KERNEL__
-
-/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
- * may be named user_desc (but in 2.4 and in header matching its API was named
- * modify_ldt_ldt_s). */
-
-typedef struct um_dup_user_desc {
- unsigned int entry_number;
- unsigned int base_addr;
- unsigned int limit;
- unsigned int seg_32bit:1;
- unsigned int contents:2;
- unsigned int read_exec_only:1;
- unsigned int limit_in_pages:1;
- unsigned int seg_not_present:1;
- unsigned int useable:1;
-} user_desc_t;
-
-# else /* __KERNEL__ */
-
-# include <ldt.h>
-typedef struct user_desc user_desc_t;
-
-# endif /* __KERNEL__ */
-
-#define GDT_ENTRY_TLS_MIN_I386 6
-#define GDT_ENTRY_TLS_MIN_X86_64 12
-
-#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/sys-i386/shared/sysdep/vm-flags.h b/arch/um/sys-i386/shared/sysdep/vm-flags.h
deleted file mode 100644
index e0d24c5..0000000
--- a/arch/um/sys-i386/shared/sysdep/vm-flags.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __VM_FLAGS_I386_H
-#define __VM_FLAGS_I386_H
-
-#define VM_DATA_DEFAULT_FLAGS \
- (VM_READ | VM_WRITE | \
- ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#endif
diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c
deleted file mode 100644
index 89a4662..0000000
--- a/arch/um/sys-i386/signal.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <linux/ptrace.h>
-#include <asm/unistd.h>
-#include <asm/uaccess.h>
-#include <asm/ucontext.h>
-#include "frame_kern.h"
-#include "skas.h"
-
-void copy_sc(struct uml_pt_regs *regs, void *from)
-{
- struct sigcontext *sc = from;
-
- REGS_GS(regs->gp) = sc->gs;
- REGS_FS(regs->gp) = sc->fs;
- REGS_ES(regs->gp) = sc->es;
- REGS_DS(regs->gp) = sc->ds;
- REGS_EDI(regs->gp) = sc->di;
- REGS_ESI(regs->gp) = sc->si;
- REGS_EBP(regs->gp) = sc->bp;
- REGS_SP(regs->gp) = sc->sp;
- REGS_EBX(regs->gp) = sc->bx;
- REGS_EDX(regs->gp) = sc->dx;
- REGS_ECX(regs->gp) = sc->cx;
- REGS_EAX(regs->gp) = sc->ax;
- REGS_IP(regs->gp) = sc->ip;
- REGS_CS(regs->gp) = sc->cs;
- REGS_EFLAGS(regs->gp) = sc->flags;
- REGS_SS(regs->gp) = sc->ss;
-}
-
-/*
- * FPU tag word conversions.
- */
-
-static inline unsigned short twd_i387_to_fxsr(unsigned short twd)
-{
- unsigned int tmp; /* to avoid 16 bit prefixes in the code */
-
- /* Transform each pair of bits into 01 (valid) or 00 (empty) */
- tmp = ~twd;
- tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
- /* and move the valid bits to the lower byte. */
- tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
- tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
- tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
- return tmp;
-}
-
-static inline unsigned long twd_fxsr_to_i387(struct user_fxsr_struct *fxsave)
-{
- struct _fpxreg *st = NULL;
- unsigned long twd = (unsigned long) fxsave->twd;
- unsigned long tag;
- unsigned long ret = 0xffff0000;
- int i;
-
-#define FPREG_ADDR(f, n) ((char *)&(f)->st_space + (n) * 16)
-
- for (i = 0; i < 8; i++) {
- if (twd & 0x1) {
- st = (struct _fpxreg *) FPREG_ADDR(fxsave, i);
-
- switch (st->exponent & 0x7fff) {
- case 0x7fff:
- tag = 2; /* Special */
- break;
- case 0x0000:
- if ( !st->significand[0] &&
- !st->significand[1] &&
- !st->significand[2] &&
- !st->significand[3] ) {
- tag = 1; /* Zero */
- } else {
- tag = 2; /* Special */
- }
- break;
- default:
- if (st->significand[3] & 0x8000) {
- tag = 0; /* Valid */
- } else {
- tag = 2; /* Special */
- }
- break;
- }
- } else {
- tag = 3; /* Empty */
- }
- ret |= (tag << (2 * i));
- twd = twd >> 1;
- }
- return ret;
-}
-
-static int convert_fxsr_to_user(struct _fpstate __user *buf,
- struct user_fxsr_struct *fxsave)
-{
- unsigned long env[7];
- struct _fpreg __user *to;
- struct _fpxreg *from;
- int i;
-
- env[0] = (unsigned long)fxsave->cwd | 0xffff0000ul;
- env[1] = (unsigned long)fxsave->swd | 0xffff0000ul;
- env[2] = twd_fxsr_to_i387(fxsave);
- env[3] = fxsave->fip;
- env[4] = fxsave->fcs | ((unsigned long)fxsave->fop << 16);
- env[5] = fxsave->foo;
- env[6] = fxsave->fos;
-
- if (__copy_to_user(buf, env, 7 * sizeof(unsigned long)))
- return 1;
-
- to = &buf->_st[0];
- from = (struct _fpxreg *) &fxsave->st_space[0];
- for (i = 0; i < 8; i++, to++, from++) {
- unsigned long __user *t = (unsigned long __user *)to;
- unsigned long *f = (unsigned long *)from;
-
- if (__put_user(*f, t) ||
- __put_user(*(f + 1), t + 1) ||
- __put_user(from->exponent, &to->exponent))
- return 1;
- }
- return 0;
-}
-
-static int convert_fxsr_from_user(struct user_fxsr_struct *fxsave,
- struct _fpstate __user *buf)
-{
- unsigned long env[7];
- struct _fpxreg *to;
- struct _fpreg __user *from;
- int i;
-
- if (copy_from_user( env, buf, 7 * sizeof(long)))
- return 1;
-
- fxsave->cwd = (unsigned short)(env[0] & 0xffff);
- fxsave->swd = (unsigned short)(env[1] & 0xffff);
- fxsave->twd = twd_i387_to_fxsr((unsigned short)(env[2] & 0xffff));
- fxsave->fip = env[3];
- fxsave->fop = (unsigned short)((env[4] & 0xffff0000ul) >> 16);
- fxsave->fcs = (env[4] & 0xffff);
- fxsave->foo = env[5];
- fxsave->fos = env[6];
-
- to = (struct _fpxreg *) &fxsave->st_space[0];
- from = &buf->_st[0];
- for (i = 0; i < 8; i++, to++, from++) {
- unsigned long *t = (unsigned long *)to;
- unsigned long __user *f = (unsigned long __user *)from;
-
- if (__get_user(*t, f) ||
- __get_user(*(t + 1), f + 1) ||
- __get_user(to->exponent, &from->exponent))
- return 1;
- }
- return 0;
-}
-
-extern int have_fpx_regs;
-
-static int copy_sc_from_user(struct pt_regs *regs,
- struct sigcontext __user *from)
-{
- struct sigcontext sc;
- int err, pid;
-
- err = copy_from_user(&sc, from, sizeof(sc));
- if (err)
- return err;
-
- pid = userspace_pid[current_thread_info()->cpu];
- copy_sc(®s->regs, &sc);
- if (have_fpx_regs) {
- struct user_fxsr_struct fpx;
-
- err = copy_from_user(&fpx,
- &((struct _fpstate __user *)sc.fpstate)->_fxsr_env[0],
- sizeof(struct user_fxsr_struct));
- if (err)
- return 1;
-
- err = convert_fxsr_from_user(&fpx, sc.fpstate);
- if (err)
- return 1;
-
- err = restore_fpx_registers(pid, (unsigned long *) &fpx);
- if (err < 0) {
- printk(KERN_ERR "copy_sc_from_user - "
- "restore_fpx_registers failed, errno = %d\n",
- -err);
- return 1;
- }
- }
- else {
- struct user_i387_struct fp;
-
- err = copy_from_user(&fp, sc.fpstate,
- sizeof(struct user_i387_struct));
- if (err)
- return 1;
-
- err = restore_fp_registers(pid, (unsigned long *) &fp);
- if (err < 0) {
- printk(KERN_ERR "copy_sc_from_user - "
- "restore_fp_registers failed, errno = %d\n",
- -err);
- return 1;
- }
- }
-
- return 0;
-}
-
-static int copy_sc_to_user(struct sigcontext __user *to,
- struct _fpstate __user *to_fp, struct pt_regs *regs,
- unsigned long sp)
-{
- struct sigcontext sc;
- struct faultinfo * fi = ¤t->thread.arch.faultinfo;
- int err, pid;
-
- sc.gs = REGS_GS(regs->regs.gp);
- sc.fs = REGS_FS(regs->regs.gp);
- sc.es = REGS_ES(regs->regs.gp);
- sc.ds = REGS_DS(regs->regs.gp);
- sc.di = REGS_EDI(regs->regs.gp);
- sc.si = REGS_ESI(regs->regs.gp);
- sc.bp = REGS_EBP(regs->regs.gp);
- sc.sp = sp;
- sc.bx = REGS_EBX(regs->regs.gp);
- sc.dx = REGS_EDX(regs->regs.gp);
- sc.cx = REGS_ECX(regs->regs.gp);
- sc.ax = REGS_EAX(regs->regs.gp);
- sc.ip = REGS_IP(regs->regs.gp);
- sc.cs = REGS_CS(regs->regs.gp);
- sc.flags = REGS_EFLAGS(regs->regs.gp);
- sc.sp_at_signal = regs->regs.gp[UESP];
- sc.ss = regs->regs.gp[SS];
- sc.cr2 = fi->cr2;
- sc.err = fi->error_code;
- sc.trapno = fi->trap_no;
-
- to_fp = (to_fp ? to_fp : (struct _fpstate __user *) (to + 1));
- sc.fpstate = to_fp;
-
- pid = userspace_pid[current_thread_info()->cpu];
- if (have_fpx_regs) {
- struct user_fxsr_struct fpx;
-
- err = save_fpx_registers(pid, (unsigned long *) &fpx);
- if (err < 0){
- printk(KERN_ERR "copy_sc_to_user - save_fpx_registers "
- "failed, errno = %d\n", err);
- return 1;
- }
-
- err = convert_fxsr_to_user(to_fp, &fpx);
- if (err)
- return 1;
-
- err |= __put_user(fpx.swd, &to_fp->status);
- err |= __put_user(X86_FXSR_MAGIC, &to_fp->magic);
- if (err)
- return 1;
-
- if (copy_to_user(&to_fp->_fxsr_env[0], &fpx,
- sizeof(struct user_fxsr_struct)))
- return 1;
- }
- else {
- struct user_i387_struct fp;
-
- err = save_fp_registers(pid, (unsigned long *) &fp);
- if (copy_to_user(to_fp, &fp, sizeof(struct user_i387_struct)))
- return 1;
- }
-
- return copy_to_user(to, &sc, sizeof(sc));
-}
-
-static int copy_ucontext_to_user(struct ucontext __user *uc,
- struct _fpstate __user *fp, sigset_t *set,
- unsigned long sp)
-{
- int err = 0;
-
- err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp);
- err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags);
- err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
- err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs, sp);
- err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
- return err;
-}
-
-struct sigframe
-{
- char __user *pretcode;
- int sig;
- struct sigcontext sc;
- struct _fpstate fpstate;
- unsigned long extramask[_NSIG_WORDS-1];
- char retcode[8];
-};
-
-struct rt_sigframe
-{
- char __user *pretcode;
- int sig;
- struct siginfo __user *pinfo;
- void __user *puc;
- struct siginfo info;
- struct ucontext uc;
- struct _fpstate fpstate;
- char retcode[8];
-};
-
-int setup_signal_stack_sc(unsigned long stack_top, int sig,
- struct k_sigaction *ka, struct pt_regs *regs,
- sigset_t *mask)
-{
- struct sigframe __user *frame;
- void __user *restorer;
- unsigned long save_sp = PT_REGS_SP(regs);
- int err = 0;
-
- /* This is the same calculation as i386 - ((sp + 4) & 15) == 0 */
- stack_top = ((stack_top + 4) & -16UL) - 4;
- frame = (struct sigframe __user *) stack_top - 1;
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- return 1;
-
- restorer = frame->retcode;
- if (ka->sa.sa_flags & SA_RESTORER)
- restorer = ka->sa.sa_restorer;
-
- /* Update SP now because the page fault handler refuses to extend
- * the stack if the faulting address is too far below the current
- * SP, which frame now certainly is. If there's an error, the original
- * value is restored on the way out.
- * When writing the sigcontext to the stack, we have to write the
- * original value, so that's passed to copy_sc_to_user, which does
- * the right thing with it.
- */
- PT_REGS_SP(regs) = (unsigned long) frame;
-
- err |= __put_user(restorer, &frame->pretcode);
- err |= __put_user(sig, &frame->sig);
- err |= copy_sc_to_user(&frame->sc, NULL, regs, save_sp);
- err |= __put_user(mask->sig[0], &frame->sc.oldmask);
- if (_NSIG_WORDS > 1)
- err |= __copy_to_user(&frame->extramask, &mask->sig[1],
- sizeof(frame->extramask));
-
- /*
- * This is popl %eax ; movl $,%eax ; int $0x80
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
- * reasons and because gdb uses it as a signature to notice
- * signal handler stack frames.
- */
- err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
- err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
-
- if (err)
- goto err;
-
- PT_REGS_SP(regs) = (unsigned long) frame;
- PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
- PT_REGS_EAX(regs) = (unsigned long) sig;
- PT_REGS_EDX(regs) = (unsigned long) 0;
- PT_REGS_ECX(regs) = (unsigned long) 0;
-
- if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
- ptrace_notify(SIGTRAP);
- return 0;
-
-err:
- PT_REGS_SP(regs) = save_sp;
- return err;
-}
-
-int setup_signal_stack_si(unsigned long stack_top, int sig,
- struct k_sigaction *ka, struct pt_regs *regs,
- siginfo_t *info, sigset_t *mask)
-{
- struct rt_sigframe __user *frame;
- void __user *restorer;
- unsigned long save_sp = PT_REGS_SP(regs);
- int err = 0;
-
- stack_top &= -8UL;
- frame = (struct rt_sigframe __user *) stack_top - 1;
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- return 1;
-
- restorer = frame->retcode;
- if (ka->sa.sa_flags & SA_RESTORER)
- restorer = ka->sa.sa_restorer;
-
- /* See comment above about why this is here */
- PT_REGS_SP(regs) = (unsigned long) frame;
-
- err |= __put_user(restorer, &frame->pretcode);
- err |= __put_user(sig, &frame->sig);
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, info);
- err |= copy_ucontext_to_user(&frame->uc, &frame->fpstate, mask,
- save_sp);
-
- /*
- * This is movl $,%eax ; int $0x80
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
- * reasons and because gdb uses it as a signature to notice
- * signal handler stack frames.
- */
- err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
- err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
-
- if (err)
- goto err;
-
- PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
- PT_REGS_EAX(regs) = (unsigned long) sig;
- PT_REGS_EDX(regs) = (unsigned long) &frame->info;
- PT_REGS_ECX(regs) = (unsigned long) &frame->uc;
-
- if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
- ptrace_notify(SIGTRAP);
- return 0;
-
-err:
- PT_REGS_SP(regs) = save_sp;
- return err;
-}
-
-long sys_sigreturn(struct pt_regs regs)
-{
- unsigned long sp = PT_REGS_SP(¤t->thread.regs);
- struct sigframe __user *frame = (struct sigframe __user *)(sp - 8);
- sigset_t set;
- struct sigcontext __user *sc = &frame->sc;
- unsigned long __user *oldmask = &sc->oldmask;
- unsigned long __user *extramask = frame->extramask;
- int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long);
-
- if (copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) ||
- copy_from_user(&set.sig[1], extramask, sig_size))
- goto segfault;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (copy_sc_from_user(¤t->thread.regs, sc))
- goto segfault;
-
- /* Avoid ERESTART handling */
- PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
- return PT_REGS_SYSCALL_RET(¤t->thread.regs);
-
- segfault:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-long sys_rt_sigreturn(struct pt_regs regs)
-{
- unsigned long sp = PT_REGS_SP(¤t->thread.regs);
- struct rt_sigframe __user *frame =
- (struct rt_sigframe __user *) (sp - 4);
- sigset_t set;
- struct ucontext __user *uc = &frame->uc;
- int sig_size = _NSIG_WORDS * sizeof(unsigned long);
-
- if (copy_from_user(&set, &uc->uc_sigmask, sig_size))
- goto segfault;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext))
- goto segfault;
-
- /* Avoid ERESTART handling */
- PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
- return PT_REGS_SYSCALL_RET(¤t->thread.regs);
-
- segfault:
- force_sig(SIGSEGV, current);
- return 0;
-}
diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c
deleted file mode 100644
index 28ccf73..0000000
--- a/arch/um/sys-i386/stub_segv.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include "sysdep/stub.h"
-#include "sysdep/sigcontext.h"
-
-void __attribute__ ((__section__ (".__syscall_stub")))
-stub_segv_handler(int sig)
-{
- struct sigcontext *sc = (struct sigcontext *) (&sig + 1);
-
- GET_FAULTINFO_FROM_SC(*((struct faultinfo *) STUB_DATA), sc);
-
- trap_myself();
-}
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/um/sys-i386/sys_call_table.S
deleted file mode 100644
index de274071..0000000
--- a/arch/um/sys-i386/sys_call_table.S
+++ /dev/null
@@ -1,28 +0,0 @@
-#include <linux/linkage.h>
-/* Steal i386 syscall table for our purposes, but with some slight changes.*/
-
-#define sys_iopl sys_ni_syscall
-#define sys_ioperm sys_ni_syscall
-
-#define sys_vm86old sys_ni_syscall
-#define sys_vm86 sys_ni_syscall
-
-#define old_mmap sys_old_mmap
-
-#define ptregs_fork sys_fork
-#define ptregs_execve sys_execve
-#define ptregs_iopl sys_iopl
-#define ptregs_vm86old sys_vm86old
-#define ptregs_sigreturn sys_sigreturn
-#define ptregs_clone sys_clone
-#define ptregs_vm86 sys_vm86
-#define ptregs_rt_sigreturn sys_rt_sigreturn
-#define ptregs_sigaltstack sys_sigaltstack
-#define ptregs_vfork sys_vfork
-
-.section .rodata,"a"
-
-#include "../../x86/kernel/syscall_table_32.S"
-
-ENTRY(syscall_table_size)
-.long .-sys_call_table
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
deleted file mode 100644
index 5f883bf..0000000
--- a/arch/um/sys-i386/user-offsets.c
+++ /dev/null
@@ -1,53 +0,0 @@
-#include <stdio.h>
-#include <stddef.h>
-#include <signal.h>
-#include <sys/poll.h>
-#include <sys/user.h>
-#include <sys/mman.h>
-#include <asm/ptrace.h>
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define DEFINE_LONGS(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
-
-#define OFFSET(sym, str, mem) \
- DEFINE(sym, offsetof(struct str, mem));
-
-void foo(void)
-{
- OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
- OFFSET(HOST_SC_ERR, sigcontext, err);
- OFFSET(HOST_SC_CR2, sigcontext, cr2);
-
- DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
- DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
-
- DEFINE(HOST_IP, EIP);
- DEFINE(HOST_SP, UESP);
- DEFINE(HOST_EFLAGS, EFL);
- DEFINE(HOST_EAX, EAX);
- DEFINE(HOST_EBX, EBX);
- DEFINE(HOST_ECX, ECX);
- DEFINE(HOST_EDX, EDX);
- DEFINE(HOST_ESI, ESI);
- DEFINE(HOST_EDI, EDI);
- DEFINE(HOST_EBP, EBP);
- DEFINE(HOST_CS, CS);
- DEFINE(HOST_SS, SS);
- DEFINE(HOST_DS, DS);
- DEFINE(HOST_FS, FS);
- DEFINE(HOST_ES, ES);
- DEFINE(HOST_GS, GS);
- DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
-
- /* XXX Duplicated between i386 and x86_64 */
- DEFINE(UM_POLLIN, POLLIN);
- DEFINE(UM_POLLPRI, POLLPRI);
- DEFINE(UM_POLLOUT, POLLOUT);
-
- DEFINE(UM_PROT_READ, PROT_READ);
- DEFINE(UM_PROT_WRITE, PROT_WRITE);
- DEFINE(UM_PROT_EXEC, PROT_EXEC);
-}
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
deleted file mode 100644
index bd4d1d3..0000000
--- a/arch/um/sys-x86_64/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright 2003 PathScale, Inc.
-#
-# Licensed under the GPL
-#
-
-obj-y = bug.o bugs.o delay.o fault.o ldt.o ptrace.o ptrace_user.o mem.o \
- setjmp.o signal.o stub.o stub_segv.o syscalls.o syscall_table.o \
- sysrq.o ksyms.o tls.o
-
-obj-y += vdso/
-
-subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o \
- lib/rwsem.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module.o
-
-ldt-y = ../sys-i386/ldt.o
-
-USER_OBJS := ptrace_user.o
-
-USER_OBJS += user-offsets.s
-extra-y += user-offsets.s
-
-UNPROFILE_OBJS := stub_segv.o
-CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/sys-x86_64/asm/archparam.h b/arch/um/sys-x86_64/asm/archparam.h
deleted file mode 100644
index 6c08366..0000000
--- a/arch/um/sys-x86_64/asm/archparam.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_ARCHPARAM_X86_64_H
-#define __UM_ARCHPARAM_X86_64_H
-
-
-/* No user-accessible fixmap addresses, i.e. vsyscall */
-#define FIXADDR_USER_START 0
-#define FIXADDR_USER_END 0
-
-#endif
-
diff --git a/arch/um/sys-x86_64/asm/elf.h b/arch/um/sys-x86_64/asm/elf.h
deleted file mode 100644
index 11a2bfb..0000000
--- a/arch/um/sys-x86_64/asm/elf.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * Licensed under the GPL
- */
-#ifndef __UM_ELF_X86_64_H
-#define __UM_ELF_X86_64_H
-
-#include <asm/user.h>
-#include "skas.h"
-
-/* x86-64 relocation types, taken from asm-x86_64/elf.h */
-#define R_X86_64_NONE 0 /* No reloc */
-#define R_X86_64_64 1 /* Direct 64 bit */
-#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
-#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
-#define R_X86_64_PLT32 4 /* 32 bit PLT address */
-#define R_X86_64_COPY 5 /* Copy symbol at runtime */
-#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
-#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
-#define R_X86_64_RELATIVE 8 /* Adjust by program base */
-#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative
- offset to GOT */
-#define R_X86_64_32 10 /* Direct 32 bit zero extended */
-#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
-#define R_X86_64_16 12 /* Direct 16 bit zero extended */
-#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
-#define R_X86_64_8 14 /* Direct 8 bit sign extended */
-#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
-
-#define R_X86_64_NUM 16
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- ((x)->e_machine == EM_X86_64)
-
-#define ELF_CLASS ELFCLASS64
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_X86_64
-
-#define ELF_PLAT_INIT(regs, load_addr) do { \
- PT_REGS_RBX(regs) = 0; \
- PT_REGS_RCX(regs) = 0; \
- PT_REGS_RDX(regs) = 0; \
- PT_REGS_RSI(regs) = 0; \
- PT_REGS_RDI(regs) = 0; \
- PT_REGS_RBP(regs) = 0; \
- PT_REGS_RAX(regs) = 0; \
- PT_REGS_R8(regs) = 0; \
- PT_REGS_R9(regs) = 0; \
- PT_REGS_R10(regs) = 0; \
- PT_REGS_R11(regs) = 0; \
- PT_REGS_R12(regs) = 0; \
- PT_REGS_R13(regs) = 0; \
- PT_REGS_R14(regs) = 0; \
- PT_REGS_R15(regs) = 0; \
-} while (0)
-
-#define ELF_CORE_COPY_REGS(pr_reg, _regs) \
- (pr_reg)[0] = (_regs)->regs.gp[0]; \
- (pr_reg)[1] = (_regs)->regs.gp[1]; \
- (pr_reg)[2] = (_regs)->regs.gp[2]; \
- (pr_reg)[3] = (_regs)->regs.gp[3]; \
- (pr_reg)[4] = (_regs)->regs.gp[4]; \
- (pr_reg)[5] = (_regs)->regs.gp[5]; \
- (pr_reg)[6] = (_regs)->regs.gp[6]; \
- (pr_reg)[7] = (_regs)->regs.gp[7]; \
- (pr_reg)[8] = (_regs)->regs.gp[8]; \
- (pr_reg)[9] = (_regs)->regs.gp[9]; \
- (pr_reg)[10] = (_regs)->regs.gp[10]; \
- (pr_reg)[11] = (_regs)->regs.gp[11]; \
- (pr_reg)[12] = (_regs)->regs.gp[12]; \
- (pr_reg)[13] = (_regs)->regs.gp[13]; \
- (pr_reg)[14] = (_regs)->regs.gp[14]; \
- (pr_reg)[15] = (_regs)->regs.gp[15]; \
- (pr_reg)[16] = (_regs)->regs.gp[16]; \
- (pr_reg)[17] = (_regs)->regs.gp[17]; \
- (pr_reg)[18] = (_regs)->regs.gp[18]; \
- (pr_reg)[19] = (_regs)->regs.gp[19]; \
- (pr_reg)[20] = (_regs)->regs.gp[20]; \
- (pr_reg)[21] = current->thread.arch.fs; \
- (pr_reg)[22] = 0; \
- (pr_reg)[23] = 0; \
- (pr_reg)[24] = 0; \
- (pr_reg)[25] = 0; \
- (pr_reg)[26] = 0;
-
-#define task_pt_regs(t) (&(t)->thread.regs)
-
-struct task_struct;
-
-extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
-
-#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
-
-#ifdef TIF_IA32 /* XXX */
-#error XXX, indeed
- clear_thread_flag(TIF_IA32);
-#endif
-
-#define ELF_EXEC_PAGESIZE 4096
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-extern long elf_aux_hwcap;
-#define ELF_HWCAP (elf_aux_hwcap)
-
-#define ELF_PLATFORM "x86_64"
-
-#define SET_PERSONALITY(ex) do ; while(0)
-
-#define __HAVE_ARCH_GATE_AREA 1
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int uses_interp);
-
-extern unsigned long um_vdso_addr;
-#define AT_SYSINFO_EHDR 33
-#define ARCH_DLINFO NEW_AUX_ENT(AT_SYSINFO_EHDR, um_vdso_addr)
-
-#endif
diff --git a/arch/um/sys-x86_64/asm/module.h b/arch/um/sys-x86_64/asm/module.h
deleted file mode 100644
index 8eb79c2..0000000
--- a/arch/um/sys-x86_64/asm/module.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_MODULE_X86_64_H
-#define __UM_MODULE_X86_64_H
-
-/* UML is simple */
-struct mod_arch_specific
-{
-};
-
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Sym Elf64_Sym
-#define Elf_Ehdr Elf64_Ehdr
-
-#endif
-
diff --git a/arch/um/sys-x86_64/asm/processor.h b/arch/um/sys-x86_64/asm/processor.h
deleted file mode 100644
index 875a26a..0000000
--- a/arch/um/sys-x86_64/asm/processor.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_PROCESSOR_X86_64_H
-#define __UM_PROCESSOR_X86_64_H
-
-/* include faultinfo structure */
-#include "sysdep/faultinfo.h"
-
-struct arch_thread {
- unsigned long debugregs[8];
- int debugregs_seq;
- unsigned long fs;
- struct faultinfo faultinfo;
-};
-
-/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-static inline void rep_nop(void)
-{
- __asm__ __volatile__("rep;nop": : :"memory");
-}
-
-#define cpu_relax() rep_nop()
-
-#define INIT_ARCH_THREAD { .debugregs = { [ 0 ... 7 ] = 0 }, \
- .debugregs_seq = 0, \
- .fs = 0, \
- .faultinfo = { 0, 0, 0 } }
-
-static inline void arch_flush_thread(struct arch_thread *thread)
-{
-}
-
-static inline void arch_copy_thread(struct arch_thread *from,
- struct arch_thread *to)
-{
- to->fs = from->fs;
-}
-
-#include <asm/user.h>
-
-#define current_text_addr() \
- ({ void *pc; __asm__("movq $1f,%0\n1:":"=g" (pc)); pc; })
-
-#define ARCH_IS_STACKGROW(address) \
- (address + 128 >= UPT_SP(¤t->thread.regs.regs))
-
-#define KSTK_EIP(tsk) KSTK_REG(tsk, RIP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, RSP)
-
-#include "asm/processor-generic.h"
-
-#endif
diff --git a/arch/um/sys-x86_64/asm/ptrace.h b/arch/um/sys-x86_64/asm/ptrace.h
deleted file mode 100644
index 83d8c47..0000000
--- a/arch/um/sys-x86_64/asm/ptrace.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_PTRACE_X86_64_H
-#define __UM_PTRACE_X86_64_H
-
-#include "linux/compiler.h"
-#include "asm/errno.h"
-
-#define __FRAME_OFFSETS /* Needed to get the R* macros */
-#include "asm/ptrace-generic.h"
-
-#define HOST_AUDIT_ARCH AUDIT_ARCH_X86_64
-
-#define PT_REGS_RBX(r) UPT_RBX(&(r)->regs)
-#define PT_REGS_RCX(r) UPT_RCX(&(r)->regs)
-#define PT_REGS_RDX(r) UPT_RDX(&(r)->regs)
-#define PT_REGS_RSI(r) UPT_RSI(&(r)->regs)
-#define PT_REGS_RDI(r) UPT_RDI(&(r)->regs)
-#define PT_REGS_RBP(r) UPT_RBP(&(r)->regs)
-#define PT_REGS_RAX(r) UPT_RAX(&(r)->regs)
-#define PT_REGS_R8(r) UPT_R8(&(r)->regs)
-#define PT_REGS_R9(r) UPT_R9(&(r)->regs)
-#define PT_REGS_R10(r) UPT_R10(&(r)->regs)
-#define PT_REGS_R11(r) UPT_R11(&(r)->regs)
-#define PT_REGS_R12(r) UPT_R12(&(r)->regs)
-#define PT_REGS_R13(r) UPT_R13(&(r)->regs)
-#define PT_REGS_R14(r) UPT_R14(&(r)->regs)
-#define PT_REGS_R15(r) UPT_R15(&(r)->regs)
-
-#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
-#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
-#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
-#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
-#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
-#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
-
-#define PT_REGS_ORIG_RAX(r) UPT_ORIG_RAX(&(r)->regs)
-#define PT_REGS_RIP(r) UPT_IP(&(r)->regs)
-#define PT_REGS_RSP(r) UPT_SP(&(r)->regs)
-
-#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
-
-/* XXX */
-#define user_mode(r) UPT_IS_USER(&(r)->regs)
-#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_RAX(r)
-#define PT_REGS_SYSCALL_RET(r) PT_REGS_RAX(r)
-
-#define PT_FIX_EXEC_STACK(sp) do ; while(0)
-
-#define profile_pc(regs) PT_REGS_IP(regs)
-
-struct user_desc;
-
-static inline int ptrace_get_thread_area(struct task_struct *child, int idx,
- struct user_desc __user *user_desc)
-{
- return -ENOSYS;
-}
-
-static inline int ptrace_set_thread_area(struct task_struct *child, int idx,
- struct user_desc __user *user_desc)
-{
- return -ENOSYS;
-}
-
-extern long arch_prctl(struct task_struct *task, int code,
- unsigned long __user *addr);
-#endif
diff --git a/arch/um/sys-x86_64/delay.c b/arch/um/sys-x86_64/delay.c
deleted file mode 100644
index f3fe1a6..0000000
--- a/arch/um/sys-x86_64/delay.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Richard Weinberger <richrd@nod.at>
- * Mostly copied from arch/x86/lib/delay.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/param.h>
-
-void __delay(unsigned long loops)
-{
- asm volatile(
- "test %0,%0\n"
- "jz 3f\n"
- "jmp 1f\n"
-
- ".align 16\n"
- "1: jmp 2f\n"
-
- ".align 16\n"
- "2: dec %0\n"
- " jnz 2b\n"
- "3: dec %0\n"
-
- : /* we don't need output */
- : "a" (loops)
- );
-}
-EXPORT_SYMBOL(__delay);
-
-inline void __const_udelay(unsigned long xloops)
-{
- int d0;
-
- xloops *= 4;
- asm("mull %%edx"
- : "=d" (xloops), "=&a" (d0)
- : "1" (xloops), "0"
- (loops_per_jiffy * (HZ/4)));
-
- __delay(++xloops);
-}
-EXPORT_SYMBOL(__const_udelay);
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
-}
-EXPORT_SYMBOL(__udelay);
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
-}
-EXPORT_SYMBOL(__ndelay);
diff --git a/arch/um/sys-x86_64/fault.c b/arch/um/sys-x86_64/fault.c
deleted file mode 100644
index ce85117..0000000
--- a/arch/um/sys-x86_64/fault.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#include "sysdep/ptrace.h"
-
-/* These two are from asm-um/uaccess.h and linux/module.h, check them. */
-struct exception_table_entry
-{
- unsigned long insn;
- unsigned long fixup;
-};
-
-const struct exception_table_entry *search_exception_tables(unsigned long add);
-
-int arch_fixup(unsigned long address, struct uml_pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(address);
- if (fixup != 0) {
- UPT_IP(regs) = fixup->fixup;
- return 1;
- }
- return 0;
-}
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
deleted file mode 100644
index 1db2fce..0000000
--- a/arch/um/sys-x86_64/ksyms.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <linux/module.h>
-#include <asm/string.h>
-#include <asm/checksum.h>
-
-/*XXX: we need them because they would be exported by x86_64 */
-#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
-EXPORT_SYMBOL(memcpy);
-#else
-EXPORT_SYMBOL(__memcpy);
-#endif
-EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
deleted file mode 100644
index 4005506..0000000
--- a/arch/um/sys-x86_64/ptrace.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * Licensed under the GPL
- */
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#define __FRAME_OFFSETS
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-
-/*
- * determines which flags the user has access to.
- * 1 = access 0 = no access
- */
-#define FLAG_MASK 0x44dd5UL
-
-int putreg(struct task_struct *child, int regno, unsigned long value)
-{
- unsigned long tmp;
-
-#ifdef TIF_IA32
- /*
- * Some code in the 64bit emulation may not be 64bit clean.
- * Don't take any chances.
- */
- if (test_tsk_thread_flag(child, TIF_IA32))
- value &= 0xffffffff;
-#endif
- switch (regno) {
- case FS:
- case GS:
- case DS:
- case ES:
- case SS:
- case CS:
- if (value && (value & 3) != 3)
- return -EIO;
- value &= 0xffff;
- break;
-
- case FS_BASE:
- case GS_BASE:
- if (!((value >> 48) == 0 || (value >> 48) == 0xffff))
- return -EIO;
- break;
-
- case EFLAGS:
- value &= FLAG_MASK;
- tmp = PT_REGS_EFLAGS(&child->thread.regs) & ~FLAG_MASK;
- value |= tmp;
- break;
- }
-
- PT_REGS_SET(&child->thread.regs, regno, value);
- return 0;
-}
-
-int poke_user(struct task_struct *child, long addr, long data)
-{
- if ((addr & 3) || addr < 0)
- return -EIO;
-
- if (addr < MAX_REG_OFFSET)
- return putreg(child, addr, data);
- else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))) {
- addr -= offsetof(struct user, u_debugreg[0]);
- addr = addr >> 2;
- if ((addr == 4) || (addr == 5))
- return -EIO;
- child->thread.arch.debugregs[addr] = data;
- return 0;
- }
- return -EIO;
-}
-
-unsigned long getreg(struct task_struct *child, int regno)
-{
- unsigned long retval = ~0UL;
- switch (regno) {
- case FS:
- case GS:
- case DS:
- case ES:
- case SS:
- case CS:
- retval = 0xffff;
- /* fall through */
- default:
- retval &= PT_REG(&child->thread.regs, regno);
-#ifdef TIF_IA32
- if (test_tsk_thread_flag(child, TIF_IA32))
- retval &= 0xffffffff;
-#endif
- }
- return retval;
-}
-
-int peek_user(struct task_struct *child, long addr, long data)
-{
- /* read the word at location addr in the USER area. */
- unsigned long tmp;
-
- if ((addr & 3) || addr < 0)
- return -EIO;
-
- tmp = 0; /* Default return condition */
- if (addr < MAX_REG_OFFSET)
- tmp = getreg(child, addr);
- else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))) {
- addr -= offsetof(struct user, u_debugreg[0]);
- addr = addr >> 2;
- tmp = child->thread.arch.debugregs[addr];
- }
- return put_user(tmp, (unsigned long *) data);
-}
-
-/* XXX Mostly copied from sys-i386 */
-int is_syscall(unsigned long addr)
-{
- unsigned short instr;
- int n;
-
- n = copy_from_user(&instr, (void __user *) addr, sizeof(instr));
- if (n) {
- /*
- * access_process_vm() grants access to vsyscall and stub,
- * while copy_from_user doesn't. Maybe access_process_vm is
- * slow, but that doesn't matter, since it will be called only
- * in case of singlestepping, if copy_from_user failed.
- */
- n = access_process_vm(current, addr, &instr, sizeof(instr), 0);
- if (n != sizeof(instr)) {
- printk("is_syscall : failed to read instruction from "
- "0x%lx\n", addr);
- return 1;
- }
- }
- /* sysenter */
- return instr == 0x050f;
-}
-
-static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
-{
- int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
-
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- err = save_fp_registers(userspace_pid[cpu], fpregs);
- if (err)
- return err;
-
- n = copy_to_user(buf, fpregs, sizeof(fpregs));
- if (n > 0)
- return -EFAULT;
-
- return n;
-}
-
-static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
-{
- int n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
-
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, buf, sizeof(fpregs));
- if (n > 0)
- return -EFAULT;
-
- return restore_fp_registers(userspace_pid[cpu], fpregs);
-}
-
-long subarch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- int ret = -EIO;
- void __user *datap = (void __user *) data;
-
- switch (request) {
- case PTRACE_GETFPREGS: /* Get the child FPU state. */
- ret = get_fpregs(datap, child);
- break;
- case PTRACE_SETFPREGS: /* Set the child FPU state. */
- ret = set_fpregs(datap, child);
- break;
- case PTRACE_ARCH_PRCTL:
- /* XXX Calls ptrace on the host - needs some SMP thinking */
- ret = arch_prctl(child, data, (void __user *) addr);
- break;
- }
-
- return ret;
-}
diff --git a/arch/um/sys-x86_64/ptrace_user.c b/arch/um/sys-x86_64/ptrace_user.c
deleted file mode 100644
index c57a496..0000000
--- a/arch/um/sys-x86_64/ptrace_user.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include "ptrace_user.h"
-
-int ptrace_getregs(long pid, unsigned long *regs_out)
-{
- if (ptrace(PTRACE_GETREGS, pid, 0, regs_out) < 0)
- return -errno;
- return(0);
-}
-
-int ptrace_setregs(long pid, unsigned long *regs_out)
-{
- if (ptrace(PTRACE_SETREGS, pid, 0, regs_out) < 0)
- return -errno;
- return(0);
-}
diff --git a/arch/um/sys-x86_64/shared/sysdep/barrier.h b/arch/um/sys-x86_64/shared/sysdep/barrier.h
deleted file mode 100644
index 7b610be..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/barrier.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __SYSDEP_X86_64_BARRIER_H
-#define __SYSDEP_X86_64_BARRIER_H
-
-/* Copied from include/asm-x86_64 for use by userspace. */
-#define mb() asm volatile("mfence":::"memory")
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/faultinfo.h b/arch/um/sys-x86_64/shared/sysdep/faultinfo.h
deleted file mode 100644
index cb917b0..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/faultinfo.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- * Licensed under the GPL
- */
-
-#ifndef __FAULTINFO_X86_64_H
-#define __FAULTINFO_X86_64_H
-
-/* this structure contains the full arch-specific faultinfo
- * from the traps.
- * On i386, ptrace_faultinfo unfortunately doesn't provide
- * all the info, since trap_no is missing.
- * All common elements are defined at the same position in
- * both structures, thus making it easy to copy the
- * contents without knowledge about the structure elements.
- */
-struct faultinfo {
- int error_code; /* in ptrace_faultinfo misleadingly called is_write */
- unsigned long cr2; /* in ptrace_faultinfo called addr */
- int trap_no; /* missing in ptrace_faultinfo */
-};
-
-#define FAULT_WRITE(fi) ((fi).error_code & 2)
-#define FAULT_ADDRESS(fi) ((fi).cr2)
-
-#define PTRACE_FULL_FAULTINFO 1
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/host_ldt.h b/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
deleted file mode 100644
index e8b1be1..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef __ASM_HOST_LDT_X86_64_H
-#define __ASM_HOST_LDT_X86_64_H
-
-#include <asm/ldt.h>
-
-/*
- * macros stolen from include/asm-x86_64/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-/* Don't allow setting of the lm bit. It is useless anyways because
- * 64bit system calls require __USER_CS. */
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- /* ((info)->lm << 21) | */ \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 && \
- (info)->lm == 0)
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h b/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
deleted file mode 100644
index a307237..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/elf.h>
-#include <linux/crypto.h>
-#include <asm/page.h>
-#include <asm/mman.h>
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define DEFINE_STR1(x) #x
-#define DEFINE_STR(sym, val) asm volatile("\n->" #sym " " DEFINE_STR1(val) " " #val: : )
-
-#define BLANK() asm volatile("\n->" : : )
-
-#define OFFSET(sym, str, mem) \
- DEFINE(sym, offsetof(struct str, mem));
-
-void foo(void)
-{
-#include <common-offsets.h>
-}
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
deleted file mode 100644
index 8ee8f8e..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_PTRACE_H
-#define __SYSDEP_X86_64_PTRACE_H
-
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-
-#define REGS_RBX(r) ((r)[HOST_RBX])
-#define REGS_RCX(r) ((r)[HOST_RCX])
-#define REGS_RDX(r) ((r)[HOST_RDX])
-#define REGS_RSI(r) ((r)[HOST_RSI])
-#define REGS_RDI(r) ((r)[HOST_RDI])
-#define REGS_RBP(r) ((r)[HOST_RBP])
-#define REGS_RAX(r) ((r)[HOST_RAX])
-#define REGS_R8(r) ((r)[HOST_R8])
-#define REGS_R9(r) ((r)[HOST_R9])
-#define REGS_R10(r) ((r)[HOST_R10])
-#define REGS_R11(r) ((r)[HOST_R11])
-#define REGS_R12(r) ((r)[HOST_R12])
-#define REGS_R13(r) ((r)[HOST_R13])
-#define REGS_R14(r) ((r)[HOST_R14])
-#define REGS_R15(r) ((r)[HOST_R15])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_SS(r) ((r)[HOST_SS])
-
-#define HOST_FS_BASE 21
-#define HOST_GS_BASE 22
-#define HOST_DS 23
-#define HOST_ES 24
-#define HOST_FS 25
-#define HOST_GS 26
-
-/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these
- * are already defined for kernel code, but not for userspace code.
- */
-#ifndef FS_BASE
-/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
- * which is what x86_64 ptrace actually uses.
- */
-#define FS_BASE (HOST_FS_BASE * sizeof(long))
-#define GS_BASE (HOST_GS_BASE * sizeof(long))
-#define DS (HOST_DS * sizeof(long))
-#define ES (HOST_ES * sizeof(long))
-#define FS (HOST_FS * sizeof(long))
-#define GS (HOST_GS * sizeof(long))
-#endif
-
-#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
-#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
-
-#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
-
-#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
-
-#define REGS_TRAP(r) ((r)->trap_type)
-
-#define REGS_ERR(r) ((r)->fault_type)
-
-struct uml_pt_regs {
- unsigned long gp[MAX_REG_NR];
- unsigned long fp[HOST_FP_SIZE];
- struct faultinfo faultinfo;
- long syscall;
- int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_RBX(r) REGS_RBX((r)->gp)
-#define UPT_RCX(r) REGS_RCX((r)->gp)
-#define UPT_RDX(r) REGS_RDX((r)->gp)
-#define UPT_RSI(r) REGS_RSI((r)->gp)
-#define UPT_RDI(r) REGS_RDI((r)->gp)
-#define UPT_RBP(r) REGS_RBP((r)->gp)
-#define UPT_RAX(r) REGS_RAX((r)->gp)
-#define UPT_R8(r) REGS_R8((r)->gp)
-#define UPT_R9(r) REGS_R9((r)->gp)
-#define UPT_R10(r) REGS_R10((r)->gp)
-#define UPT_R11(r) REGS_R11((r)->gp)
-#define UPT_R12(r) REGS_R12((r)->gp)
-#define UPT_R13(r) REGS_R13((r)->gp)
-#define UPT_R14(r) REGS_R14((r)->gp)
-#define UPT_R15(r) REGS_R15((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_SYSCALL_NR(r) ((r)->syscall)
-#define UPT_SYSCALL_RET(r) UPT_RAX(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
-#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
-#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
-#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
-#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
-
-struct syscall_args {
- unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
- { .args = { UPT_SYSCALL_ARG1(r), \
- UPT_SYSCALL_ARG2(r), \
- UPT_SYSCALL_ARG3(r), \
- UPT_SYSCALL_ARG4(r), \
- UPT_SYSCALL_ARG5(r), \
- UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
- ({ unsigned long val; \
- switch(reg){ \
- case R8: val = UPT_R8(regs); break; \
- case R9: val = UPT_R9(regs); break; \
- case R10: val = UPT_R10(regs); break; \
- case R11: val = UPT_R11(regs); break; \
- case R12: val = UPT_R12(regs); break; \
- case R13: val = UPT_R13(regs); break; \
- case R14: val = UPT_R14(regs); break; \
- case R15: val = UPT_R15(regs); break; \
- case RIP: val = UPT_IP(regs); break; \
- case RSP: val = UPT_SP(regs); break; \
- case RAX: val = UPT_RAX(regs); break; \
- case RBX: val = UPT_RBX(regs); break; \
- case RCX: val = UPT_RCX(regs); break; \
- case RDX: val = UPT_RDX(regs); break; \
- case RSI: val = UPT_RSI(regs); break; \
- case RDI: val = UPT_RDI(regs); break; \
- case RBP: val = UPT_RBP(regs); break; \
- case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
- case CS: val = UPT_CS(regs); break; \
- case SS: val = UPT_SS(regs); break; \
- case FS_BASE: val = UPT_FS_BASE(regs); break; \
- case GS_BASE: val = UPT_GS_BASE(regs); break; \
- case DS: val = UPT_DS(regs); break; \
- case ES: val = UPT_ES(regs); break; \
- case FS : val = UPT_FS (regs); break; \
- case GS: val = UPT_GS(regs); break; \
- case EFLAGS: val = UPT_EFLAGS(regs); break; \
- default : \
- panic("Bad register in UPT_REG : %d\n", reg); \
- val = -1; \
- } \
- val; \
- })
-
-
-#define UPT_SET(regs, reg, val) \
- ({ unsigned long __upt_val = val; \
- switch(reg){ \
- case R8: UPT_R8(regs) = __upt_val; break; \
- case R9: UPT_R9(regs) = __upt_val; break; \
- case R10: UPT_R10(regs) = __upt_val; break; \
- case R11: UPT_R11(regs) = __upt_val; break; \
- case R12: UPT_R12(regs) = __upt_val; break; \
- case R13: UPT_R13(regs) = __upt_val; break; \
- case R14: UPT_R14(regs) = __upt_val; break; \
- case R15: UPT_R15(regs) = __upt_val; break; \
- case RIP: UPT_IP(regs) = __upt_val; break; \
- case RSP: UPT_SP(regs) = __upt_val; break; \
- case RAX: UPT_RAX(regs) = __upt_val; break; \
- case RBX: UPT_RBX(regs) = __upt_val; break; \
- case RCX: UPT_RCX(regs) = __upt_val; break; \
- case RDX: UPT_RDX(regs) = __upt_val; break; \
- case RSI: UPT_RSI(regs) = __upt_val; break; \
- case RDI: UPT_RDI(regs) = __upt_val; break; \
- case RBP: UPT_RBP(regs) = __upt_val; break; \
- case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
- case CS: UPT_CS(regs) = __upt_val; break; \
- case SS: UPT_SS(regs) = __upt_val; break; \
- case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break; \
- case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break; \
- case DS: UPT_DS(regs) = __upt_val; break; \
- case ES: UPT_ES(regs) = __upt_val; break; \
- case FS: UPT_FS(regs) = __upt_val; break; \
- case GS: UPT_GS(regs) = __upt_val; break; \
- case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
- default : \
- panic("Bad register in UPT_SET : %d\n", reg); \
- break; \
- } \
- __upt_val; \
- })
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
- REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-static inline void arch_init_registers(int pid)
-{
-}
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h b/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
deleted file mode 100644
index 4dbccdb..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_PTRACE_USER_H__
-#define __SYSDEP_X86_64_PTRACE_USER_H__
-
-#define __FRAME_OFFSETS
-#include <sys/ptrace.h>
-#include <linux/ptrace.h>
-#include <asm/ptrace.h>
-#undef __FRAME_OFFSETS
-#include "user_constants.h"
-
-#define PT_INDEX(off) ((off) / sizeof(unsigned long))
-
-#define PT_SYSCALL_NR(regs) ((regs)[PT_INDEX(ORIG_RAX)])
-#define PT_SYSCALL_NR_OFFSET (ORIG_RAX)
-
-#define PT_SYSCALL_ARG1(regs) (((unsigned long *) (regs))[PT_INDEX(RDI)])
-#define PT_SYSCALL_ARG1_OFFSET (RDI)
-
-#define PT_SYSCALL_ARG2(regs) (((unsigned long *) (regs))[PT_INDEX(RSI)])
-#define PT_SYSCALL_ARG2_OFFSET (RSI)
-
-#define PT_SYSCALL_ARG3(regs) (((unsigned long *) (regs))[PT_INDEX(RDX)])
-#define PT_SYSCALL_ARG3_OFFSET (RDX)
-
-#define PT_SYSCALL_ARG4(regs) (((unsigned long *) (regs))[PT_INDEX(RCX)])
-#define PT_SYSCALL_ARG4_OFFSET (RCX)
-
-#define PT_SYSCALL_ARG5(regs) (((unsigned long *) (regs))[PT_INDEX(R8)])
-#define PT_SYSCALL_ARG5_OFFSET (R8)
-
-#define PT_SYSCALL_ARG6(regs) (((unsigned long *) (regs))[PT_INDEX(R9)])
-#define PT_SYSCALL_ARG6_OFFSET (R9)
-
-#define PT_SYSCALL_RET_OFFSET (RAX)
-
-#define PT_IP_OFFSET (RIP)
-#define PT_IP(regs) ((regs)[PT_INDEX(RIP)])
-
-#define PT_SP_OFFSET (RSP)
-#define PT_SP(regs) ((regs)[PT_INDEX(RSP)])
-
-#define PT_ORIG_RAX_OFFSET (ORIG_RAX)
-#define PT_ORIG_RAX(regs) ((regs)[PT_INDEX(ORIG_RAX)])
-
-/*
- * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
- * it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
- * 2.4 name and value for 2.4 host compatibility.
- */
-#ifndef PTRACE_OLDSETOPTIONS
-#define PTRACE_OLDSETOPTIONS 21
-#endif
-
-/*
- * These are before the system call, so the system call number is RAX
- * rather than ORIG_RAX, and arg4 is R10 rather than RCX
- */
-#define REGS_SYSCALL_NR PT_INDEX(RAX)
-#define REGS_SYSCALL_ARG1 PT_INDEX(RDI)
-#define REGS_SYSCALL_ARG2 PT_INDEX(RSI)
-#define REGS_SYSCALL_ARG3 PT_INDEX(RDX)
-#define REGS_SYSCALL_ARG4 PT_INDEX(R10)
-#define REGS_SYSCALL_ARG5 PT_INDEX(R8)
-#define REGS_SYSCALL_ARG6 PT_INDEX(R9)
-
-#define REGS_IP_INDEX PT_INDEX(RIP)
-#define REGS_SP_INDEX PT_INDEX(RSP)
-
-#define FP_SIZE (HOST_FP_SIZE)
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/sc.h b/arch/um/sys-x86_64/shared/sysdep/sc.h
deleted file mode 100644
index 8aee45b..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/sc.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __SYSDEP_X86_64_SC_H
-#define __SYSDEP_X86_64_SC_H
-
-/* Copyright (C) 2003 - 2004 PathScale, Inc
- * Released under the GPL
- */
-
-#include <user_constants.h>
-
-#define SC_OFFSET(sc, field) \
- *((unsigned long *) &(((char *) (sc))[HOST_##field]))
-
-#define SC_RBX(sc) SC_OFFSET(sc, SC_RBX)
-#define SC_RCX(sc) SC_OFFSET(sc, SC_RCX)
-#define SC_RDX(sc) SC_OFFSET(sc, SC_RDX)
-#define SC_RSI(sc) SC_OFFSET(sc, SC_RSI)
-#define SC_RDI(sc) SC_OFFSET(sc, SC_RDI)
-#define SC_RBP(sc) SC_OFFSET(sc, SC_RBP)
-#define SC_RAX(sc) SC_OFFSET(sc, SC_RAX)
-#define SC_R8(sc) SC_OFFSET(sc, SC_R8)
-#define SC_R9(sc) SC_OFFSET(sc, SC_R9)
-#define SC_R10(sc) SC_OFFSET(sc, SC_R10)
-#define SC_R11(sc) SC_OFFSET(sc, SC_R11)
-#define SC_R12(sc) SC_OFFSET(sc, SC_R12)
-#define SC_R13(sc) SC_OFFSET(sc, SC_R13)
-#define SC_R14(sc) SC_OFFSET(sc, SC_R14)
-#define SC_R15(sc) SC_OFFSET(sc, SC_R15)
-#define SC_IP(sc) SC_OFFSET(sc, SC_IP)
-#define SC_SP(sc) SC_OFFSET(sc, SC_SP)
-#define SC_CR2(sc) SC_OFFSET(sc, SC_CR2)
-#define SC_ERR(sc) SC_OFFSET(sc, SC_ERR)
-#define SC_TRAPNO(sc) SC_OFFSET(sc, SC_TRAPNO)
-#define SC_CS(sc) SC_OFFSET(sc, SC_CS)
-#define SC_FS(sc) SC_OFFSET(sc, SC_FS)
-#define SC_GS(sc) SC_OFFSET(sc, SC_GS)
-#define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS)
-#define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK)
-#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
-#if 0
-#define SC_ORIG_RAX(sc) SC_OFFSET(sc, SC_ORIG_RAX)
-#define SC_DS(sc) SC_OFFSET(sc, SC_DS)
-#define SC_ES(sc) SC_OFFSET(sc, SC_ES)
-#endif
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/sigcontext.h b/arch/um/sys-x86_64/shared/sysdep/sigcontext.h
deleted file mode 100644
index 0155133..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/sigcontext.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_SIGCONTEXT_H
-#define __SYSDEP_X86_64_SIGCONTEXT_H
-
-#include <sysdep/sc.h>
-
-#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
-
-#define GET_FAULTINFO_FROM_SC(fi, sc) \
- { \
- (fi).cr2 = SC_CR2(sc); \
- (fi).error_code = SC_ERR(sc); \
- (fi).trap_no = SC_TRAPNO(sc); \
- }
-
-/* This is Page Fault */
-#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
-
-/* No broken SKAS API, which doesn't pass trap_no, here. */
-#define SEGV_MAYBE_FIXABLE(fi) 0
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h b/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
deleted file mode 100644
index 95db4be7..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_SKAS_PTRACE_H
-#define __SYSDEP_X86_64_SKAS_PTRACE_H
-
-struct ptrace_faultinfo {
- int is_write;
- unsigned long addr;
-};
-
-struct ptrace_ldt {
- int func;
- void *ptr;
- unsigned long bytecount;
-};
-
-#define PTRACE_LDT 54
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/stub.h b/arch/um/sys-x86_64/shared/sysdep/stub.h
deleted file mode 100644
index 3432aa2..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/stub.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_STUB_H
-#define __SYSDEP_STUB_H
-
-#include <sys/mman.h>
-#include <asm/unistd.h>
-#include <sysdep/ptrace_user.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
-
-#define STUB_SYSCALL_RET PT_INDEX(RAX)
-#define STUB_MMAP_NR __NR_mmap
-#define MMAP_OFFSET(o) (o)
-
-#define __syscall_clobber "r11","rcx","memory"
-#define __syscall "syscall"
-
-static inline long stub_syscall0(long syscall)
-{
- long ret;
-
- __asm__ volatile (__syscall
- : "=a" (ret)
- : "0" (syscall) : __syscall_clobber );
-
- return ret;
-}
-
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
-{
- long ret;
-
- __asm__ volatile (__syscall
- : "=a" (ret)
- : "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber );
-
- return ret;
-}
-
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
-{
- long ret;
-
- __asm__ volatile (__syscall
- : "=a" (ret)
- : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3)
- : __syscall_clobber );
-
- return ret;
-}
-
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
- long arg4)
-{
- long ret;
-
- __asm__ volatile ("movq %5,%%r10 ; " __syscall
- : "=a" (ret)
- : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
- "g" (arg4)
- : __syscall_clobber, "r10" );
-
- return ret;
-}
-
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
- long arg4, long arg5)
-{
- long ret;
-
- __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall
- : "=a" (ret)
- : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
- "g" (arg4), "g" (arg5)
- : __syscall_clobber, "r10", "r8" );
-
- return ret;
-}
-
-static inline void trap_myself(void)
-{
- __asm("int3");
-}
-
-static inline void remap_stack(long fd, unsigned long offset)
-{
- __asm__ volatile ("movq %4,%%r10 ; movq %5,%%r8 ; "
- "movq %6, %%r9; " __syscall "; movq %7, %%rbx ; "
- "movq %%rax, (%%rbx)":
- : "a" (STUB_MMAP_NR), "D" (STUB_DATA),
- "S" (UM_KERN_PAGE_SIZE),
- "d" (PROT_READ | PROT_WRITE),
- "g" (MAP_FIXED | MAP_SHARED), "g" (fd),
- "g" (offset),
- "i" (&((struct stub_data *) STUB_DATA)->err)
- : __syscall_clobber, "r10", "r8", "r9" );
-}
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/syscalls.h b/arch/um/sys-x86_64/shared/sysdep/syscalls.h
deleted file mode 100644
index 7cfb0b08..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/syscalls.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_SYSCALLS_H__
-#define __SYSDEP_X86_64_SYSCALLS_H__
-
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <kern_constants.h>
-
-typedef long syscall_handler_t(void);
-
-extern syscall_handler_t *sys_call_table[];
-
-#define EXECUTE_SYSCALL(syscall, regs) \
- (((long (*)(long, long, long, long, long, long)) \
- (*sys_call_table[syscall]))(UPT_SYSCALL_ARG1(®s->regs), \
- UPT_SYSCALL_ARG2(®s->regs), \
- UPT_SYSCALL_ARG3(®s->regs), \
- UPT_SYSCALL_ARG4(®s->regs), \
- UPT_SYSCALL_ARG5(®s->regs), \
- UPT_SYSCALL_ARG6(®s->regs)))
-
-extern long old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-extern syscall_handler_t sys_modify_ldt;
-extern syscall_handler_t sys_arch_prctl;
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/system.h b/arch/um/sys-x86_64/shared/sysdep/system.h
deleted file mode 100644
index d1b93c4..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/system.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-extern unsigned long arch_align_stack(unsigned long sp);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() asm volatile("mfence":::"memory")
-#define rmb() asm volatile("lfence":::"memory")
-#define wmb() asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb() rmb()
-#else
-# define smp_rmb() barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() wmb()
-#else
-# define smp_wmb() barrier()
-#endif
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
- alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
- alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/tls.h b/arch/um/sys-x86_64/shared/sysdep/tls.h
deleted file mode 100644
index 18c000d..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/tls.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _SYSDEP_TLS_H
-#define _SYSDEP_TLS_H
-
-# ifndef __KERNEL__
-
-/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
- * may be named user_desc (but in 2.4 and in header matching its API was named
- * modify_ldt_ldt_s). */
-
-typedef struct um_dup_user_desc {
- unsigned int entry_number;
- unsigned int base_addr;
- unsigned int limit;
- unsigned int seg_32bit:1;
- unsigned int contents:2;
- unsigned int read_exec_only:1;
- unsigned int limit_in_pages:1;
- unsigned int seg_not_present:1;
- unsigned int useable:1;
- unsigned int lm:1;
-} user_desc_t;
-
-# else /* __KERNEL__ */
-
-# include <ldt.h>
-typedef struct user_desc user_desc_t;
-
-# endif /* __KERNEL__ */
-#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/sys-x86_64/shared/sysdep/vm-flags.h b/arch/um/sys-x86_64/shared/sysdep/vm-flags.h
deleted file mode 100644
index 3978e55..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/vm-flags.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Copyright 2003 PathScale, Inc.
- * Licensed under the GPL
- */
-
-#ifndef __VM_FLAGS_X86_64_H
-#define __VM_FLAGS_X86_64_H
-
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#define VM_STACK_DEFAULT_FLAGS (VM_GROWSDOWN | VM_READ | VM_WRITE | \
- VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#endif
diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c
deleted file mode 100644
index b6b65c7..0000000
--- a/arch/um/sys-x86_64/signal.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright (C) 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/kernel.h>
-#include <asm/unistd.h>
-#include <asm/uaccess.h>
-#include <asm/ucontext.h>
-#include "frame_kern.h"
-#include "skas.h"
-
-void copy_sc(struct uml_pt_regs *regs, void *from)
-{
- struct sigcontext *sc = from;
-
-#define GETREG(regs, regno, sc, regname) \
- (regs)->gp[(regno) / sizeof(unsigned long)] = (sc)->regname
-
- GETREG(regs, R8, sc, r8);
- GETREG(regs, R9, sc, r9);
- GETREG(regs, R10, sc, r10);
- GETREG(regs, R11, sc, r11);
- GETREG(regs, R12, sc, r12);
- GETREG(regs, R13, sc, r13);
- GETREG(regs, R14, sc, r14);
- GETREG(regs, R15, sc, r15);
- GETREG(regs, RDI, sc, di);
- GETREG(regs, RSI, sc, si);
- GETREG(regs, RBP, sc, bp);
- GETREG(regs, RBX, sc, bx);
- GETREG(regs, RDX, sc, dx);
- GETREG(regs, RAX, sc, ax);
- GETREG(regs, RCX, sc, cx);
- GETREG(regs, RSP, sc, sp);
- GETREG(regs, RIP, sc, ip);
- GETREG(regs, EFLAGS, sc, flags);
- GETREG(regs, CS, sc, cs);
-
-#undef GETREG
-}
-
-static int copy_sc_from_user(struct pt_regs *regs,
- struct sigcontext __user *from,
- struct _fpstate __user *fpp)
-{
- struct user_i387_struct fp;
- int err = 0;
-
-#define GETREG(regs, regno, sc, regname) \
- __get_user((regs)->regs.gp[(regno) / sizeof(unsigned long)], \
- &(sc)->regname)
-
- err |= GETREG(regs, R8, from, r8);
- err |= GETREG(regs, R9, from, r9);
- err |= GETREG(regs, R10, from, r10);
- err |= GETREG(regs, R11, from, r11);
- err |= GETREG(regs, R12, from, r12);
- err |= GETREG(regs, R13, from, r13);
- err |= GETREG(regs, R14, from, r14);
- err |= GETREG(regs, R15, from, r15);
- err |= GETREG(regs, RDI, from, di);
- err |= GETREG(regs, RSI, from, si);
- err |= GETREG(regs, RBP, from, bp);
- err |= GETREG(regs, RBX, from, bx);
- err |= GETREG(regs, RDX, from, dx);
- err |= GETREG(regs, RAX, from, ax);
- err |= GETREG(regs, RCX, from, cx);
- err |= GETREG(regs, RSP, from, sp);
- err |= GETREG(regs, RIP, from, ip);
- err |= GETREG(regs, EFLAGS, from, flags);
- err |= GETREG(regs, CS, from, cs);
- if (err)
- return 1;
-
-#undef GETREG
-
- err = copy_from_user(&fp, fpp, sizeof(struct user_i387_struct));
- if (err)
- return 1;
-
- err = restore_fp_registers(userspace_pid[current_thread_info()->cpu],
- (unsigned long *) &fp);
- if (err < 0) {
- printk(KERN_ERR "copy_sc_from_user - "
- "restore_fp_registers failed, errno = %d\n",
- -err);
- return 1;
- }
-
- return 0;
-}
-
-static int copy_sc_to_user(struct sigcontext __user *to,
- struct _fpstate __user *to_fp, struct pt_regs *regs,
- unsigned long mask, unsigned long sp)
-{
- struct faultinfo * fi = ¤t->thread.arch.faultinfo;
- struct user_i387_struct fp;
- int err = 0;
-
- err |= __put_user(0, &to->gs);
- err |= __put_user(0, &to->fs);
-
-#define PUTREG(regs, regno, sc, regname) \
- __put_user((regs)->regs.gp[(regno) / sizeof(unsigned long)], \
- &(sc)->regname)
-
- err |= PUTREG(regs, RDI, to, di);
- err |= PUTREG(regs, RSI, to, si);
- err |= PUTREG(regs, RBP, to, bp);
- /*
- * Must use original RSP, which is passed in, rather than what's in
- * the pt_regs, because that's already been updated to point at the
- * signal frame.
- */
- err |= __put_user(sp, &to->sp);
- err |= PUTREG(regs, RBX, to, bx);
- err |= PUTREG(regs, RDX, to, dx);
- err |= PUTREG(regs, RCX, to, cx);
- err |= PUTREG(regs, RAX, to, ax);
- err |= PUTREG(regs, R8, to, r8);
- err |= PUTREG(regs, R9, to, r9);
- err |= PUTREG(regs, R10, to, r10);
- err |= PUTREG(regs, R11, to, r11);
- err |= PUTREG(regs, R12, to, r12);
- err |= PUTREG(regs, R13, to, r13);
- err |= PUTREG(regs, R14, to, r14);
- err |= PUTREG(regs, R15, to, r15);
- err |= PUTREG(regs, CS, to, cs); /* XXX x86_64 doesn't do this */
-
- err |= __put_user(fi->cr2, &to->cr2);
- err |= __put_user(fi->error_code, &to->err);
- err |= __put_user(fi->trap_no, &to->trapno);
-
- err |= PUTREG(regs, RIP, to, ip);
- err |= PUTREG(regs, EFLAGS, to, flags);
-#undef PUTREG
-
- err |= __put_user(mask, &to->oldmask);
- if (err)
- return 1;
-
- err = save_fp_registers(userspace_pid[current_thread_info()->cpu],
- (unsigned long *) &fp);
- if (err < 0) {
- printk(KERN_ERR "copy_sc_from_user - restore_fp_registers "
- "failed, errno = %d\n", -err);
- return 1;
- }
-
- if (copy_to_user(to_fp, &fp, sizeof(struct user_i387_struct)))
- return 1;
-
- return err;
-}
-
-struct rt_sigframe
-{
- char __user *pretcode;
- struct ucontext uc;
- struct siginfo info;
- struct _fpstate fpstate;
-};
-
-int setup_signal_stack_si(unsigned long stack_top, int sig,
- struct k_sigaction *ka, struct pt_regs * regs,
- siginfo_t *info, sigset_t *set)
-{
- struct rt_sigframe __user *frame;
- unsigned long save_sp = PT_REGS_RSP(regs);
- int err = 0;
- struct task_struct *me = current;
-
- frame = (struct rt_sigframe __user *)
- round_down(stack_top - sizeof(struct rt_sigframe), 16);
- /* Subtract 128 for a red zone and 8 for proper alignment */
- frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8);
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto out;
-
- if (ka->sa.sa_flags & SA_SIGINFO) {
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto out;
- }
-
- /*
- * Update SP now because the page fault handler refuses to extend
- * the stack if the faulting address is too far below the current
- * SP, which frame now certainly is. If there's an error, the original
- * value is restored on the way out.
- * When writing the sigcontext to the stack, we have to write the
- * original value, so that's passed to copy_sc_to_user, which does
- * the right thing with it.
- */
- PT_REGS_RSP(regs) = (unsigned long) frame;
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
- err |= __put_user(sas_ss_flags(save_sp),
- &frame->uc.uc_stack.ss_flags);
- err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= copy_sc_to_user(&frame->uc.uc_mcontext, &frame->fpstate, regs,
- set->sig[0], save_sp);
- err |= __put_user(&frame->fpstate, &frame->uc.uc_mcontext.fpstate);
- if (sizeof(*set) == 16) {
- __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
- __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
- }
- else
- err |= __copy_to_user(&frame->uc.uc_sigmask, set,
- sizeof(*set));
-
- /*
- * Set up to return from userspace. If provided, use a stub
- * already in userspace.
- */
- /* x86-64 should always use SA_RESTORER. */
- if (ka->sa.sa_flags & SA_RESTORER)
- err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
- else
- /* could use a vstub here */
- goto restore_sp;
-
- if (err)
- goto restore_sp;
-
- /* Set up registers for signal handler */
- {
- struct exec_domain *ed = current_thread_info()->exec_domain;
- if (unlikely(ed && ed->signal_invmap && sig < 32))
- sig = ed->signal_invmap[sig];
- }
-
- PT_REGS_RDI(regs) = sig;
- /* In case the signal handler was declared without prototypes */
- PT_REGS_RAX(regs) = 0;
-
- /*
- * This also works for non SA_SIGINFO handlers because they expect the
- * next argument after the signal number on the stack.
- */
- PT_REGS_RSI(regs) = (unsigned long) &frame->info;
- PT_REGS_RDX(regs) = (unsigned long) &frame->uc;
- PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler;
- out:
- return err;
-
-restore_sp:
- PT_REGS_RSP(regs) = save_sp;
- return err;
-}
-
-long sys_rt_sigreturn(struct pt_regs *regs)
-{
- unsigned long sp = PT_REGS_SP(¤t->thread.regs);
- struct rt_sigframe __user *frame =
- (struct rt_sigframe __user *)(sp - 8);
- struct ucontext __user *uc = &frame->uc;
- sigset_t set;
-
- if (copy_from_user(&set, &uc->uc_sigmask, sizeof(set)))
- goto segfault;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext,
- &frame->fpstate))
- goto segfault;
-
- /* Avoid ERESTART handling */
- PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
- return PT_REGS_SYSCALL_RET(¤t->thread.regs);
-
- segfault:
- force_sig(SIGSEGV, current);
- return 0;
-}
diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c
deleted file mode 100644
index ced051a..0000000
--- a/arch/um/sys-x86_64/stub_segv.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-#include "as-layout.h"
-#include "sysdep/stub.h"
-#include "sysdep/faultinfo.h"
-#include "sysdep/sigcontext.h"
-
-void __attribute__ ((__section__ (".__syscall_stub")))
-stub_segv_handler(int sig)
-{
- struct ucontext *uc;
-
- __asm__ __volatile__("movq %%rdx, %0" : "=g" (uc) :);
- GET_FAULTINFO_FROM_SC(*((struct faultinfo *) STUB_DATA),
- &uc->uc_mcontext);
- trap_myself();
-}
-
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
deleted file mode 100644
index 47d469e..0000000
--- a/arch/um/sys-x86_64/syscall_table.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * System call table for UML/x86-64, copied from arch/x86_64/kernel/syscall.c
- * with some changes for UML.
- */
-
-#include <linux/linkage.h>
-#include <linux/sys.h>
-#include <linux/cache.h>
-#include <kern_constants.h>
-
-#define __NO_STUBS
-
-/*
- * Below you can see, in terms of #define's, the differences between the x86-64
- * and the UML syscall table.
- */
-
-/* Not going to be implemented by UML, since we have no hardware. */
-#define stub_iopl sys_ni_syscall
-#define sys_ioperm sys_ni_syscall
-
-/*
- * The UML TLS problem. Note that x86_64 does not implement this, so the below
- * is needed only for the ia32 compatibility.
- */
-
-/* On UML we call it this way ("old" means it's not mmap2) */
-#define sys_mmap old_mmap
-
-#define stub_clone sys_clone
-#define stub_fork sys_fork
-#define stub_vfork sys_vfork
-#define stub_execve sys_execve
-#define stub_rt_sigsuspend sys_rt_sigsuspend
-#define stub_sigaltstack sys_sigaltstack
-#define stub_rt_sigreturn sys_rt_sigreturn
-
-#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_UNISTD_64_H
-#include "../../x86/include/asm/unistd_64.h"
-
-#undef __SYSCALL
-#define __SYSCALL(nr, sym) [ nr ] = sym,
-#undef _ASM_X86_UNISTD_64_H
-
-typedef void (*sys_call_ptr_t)(void);
-
-extern void sys_ni_syscall(void);
-
-/*
- * We used to have a trick here which made sure that holes in the
- * x86_64 table were filled in with sys_ni_syscall, but a comment in
- * unistd_64.h says that holes aren't allowed, so the trick was
- * removed.
- * The trick looked like this
- * [0 ... UM_NR_syscall_max] = &sys_ni_syscall
- * before including unistd_64.h - the later initializations overwrote
- * the sys_ni_syscall filler.
- */
-
-sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
-#include "../../x86/include/asm/unistd_64.h"
-};
-
-int syscall_table_size = sizeof(sys_call_table);
diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c
deleted file mode 100644
index f4f82be..0000000
--- a/arch/um/sys-x86_64/sysrq.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/utsname.h>
-#include <asm/current.h>
-#include <asm/ptrace.h>
-#include "sysrq.h"
-
-void __show_regs(struct pt_regs *regs)
-{
- printk("\n");
- print_modules();
- printk(KERN_INFO "Pid: %d, comm: %.20s %s %s\n", task_pid_nr(current),
- current->comm, print_tainted(), init_utsname()->release);
- printk(KERN_INFO "RIP: %04lx:[<%016lx>]\n", PT_REGS_CS(regs) & 0xffff,
- PT_REGS_RIP(regs));
- printk(KERN_INFO "RSP: %016lx EFLAGS: %08lx\n", PT_REGS_RSP(regs),
- PT_REGS_EFLAGS(regs));
- printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
- PT_REGS_RAX(regs), PT_REGS_RBX(regs), PT_REGS_RCX(regs));
- printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
- PT_REGS_RDX(regs), PT_REGS_RSI(regs), PT_REGS_RDI(regs));
- printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
- PT_REGS_RBP(regs), PT_REGS_R8(regs), PT_REGS_R9(regs));
- printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
- PT_REGS_R10(regs), PT_REGS_R11(regs), PT_REGS_R12(regs));
- printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
- PT_REGS_R13(regs), PT_REGS_R14(regs), PT_REGS_R15(regs));
-}
-
-void show_regs(struct pt_regs *regs)
-{
- __show_regs(regs);
- show_trace(current, (unsigned long *) ®s);
-}
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
deleted file mode 100644
index 9735854..0000000
--- a/arch/um/sys-x86_64/user-offsets.c
+++ /dev/null
@@ -1,65 +0,0 @@
-#include <stdio.h>
-#include <stddef.h>
-#include <signal.h>
-#include <sys/poll.h>
-#include <sys/mman.h>
-#include <sys/user.h>
-#define __FRAME_OFFSETS
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define DEFINE_LONGS(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
-
-#define OFFSET(sym, str, mem) \
- DEFINE(sym, offsetof(struct str, mem));
-
-void foo(void)
-{
- OFFSET(HOST_SC_CR2, sigcontext, cr2);
- OFFSET(HOST_SC_ERR, sigcontext, err);
- OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
-
- DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
- DEFINE_LONGS(HOST_RBX, RBX);
- DEFINE_LONGS(HOST_RCX, RCX);
- DEFINE_LONGS(HOST_RDI, RDI);
- DEFINE_LONGS(HOST_RSI, RSI);
- DEFINE_LONGS(HOST_RDX, RDX);
- DEFINE_LONGS(HOST_RBP, RBP);
- DEFINE_LONGS(HOST_RAX, RAX);
- DEFINE_LONGS(HOST_R8, R8);
- DEFINE_LONGS(HOST_R9, R9);
- DEFINE_LONGS(HOST_R10, R10);
- DEFINE_LONGS(HOST_R11, R11);
- DEFINE_LONGS(HOST_R12, R12);
- DEFINE_LONGS(HOST_R13, R13);
- DEFINE_LONGS(HOST_R14, R14);
- DEFINE_LONGS(HOST_R15, R15);
- DEFINE_LONGS(HOST_ORIG_RAX, ORIG_RAX);
- DEFINE_LONGS(HOST_CS, CS);
- DEFINE_LONGS(HOST_SS, SS);
- DEFINE_LONGS(HOST_EFLAGS, EFLAGS);
-#if 0
- DEFINE_LONGS(HOST_FS, FS);
- DEFINE_LONGS(HOST_GS, GS);
- DEFINE_LONGS(HOST_DS, DS);
- DEFINE_LONGS(HOST_ES, ES);
-#endif
-
- DEFINE_LONGS(HOST_IP, RIP);
- DEFINE_LONGS(HOST_SP, RSP);
- DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
-
- /* XXX Duplicated between i386 and x86_64 */
- DEFINE(UM_POLLIN, POLLIN);
- DEFINE(UM_POLLPRI, POLLPRI);
- DEFINE(UM_POLLOUT, POLLOUT);
-
- DEFINE(UM_PROT_READ, PROT_READ);
- DEFINE(UM_PROT_WRITE, PROT_WRITE);
- DEFINE(UM_PROT_EXEC, PROT_EXEC);
-}
diff --git a/arch/um/sys-x86_64/vdso/Makefile b/arch/um/sys-x86_64/vdso/Makefile
deleted file mode 100644
index 5dffe6d..0000000
--- a/arch/um/sys-x86_64/vdso/Makefile
+++ /dev/null
@@ -1,90 +0,0 @@
-#
-# Building vDSO images for x86.
-#
-
-VDSO64-y := y
-
-vdso-install-$(VDSO64-y) += vdso.so
-
-
-# files to link into the vdso
-vobjs-y := vdso-note.o um_vdso.o
-
-# files to link into kernel
-obj-$(VDSO64-y) += vdso.o vma.o
-
-vobjs := $(foreach F,$(vobjs-y),$(obj)/$F)
-
-$(obj)/vdso.o: $(obj)/vdso.so
-
-targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y)
-
-export CPPFLAGS_vdso.lds += -P -C
-
-VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
- -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
-
-$(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
-
-$(obj)/vdso.so.dbg: $(src)/vdso.lds $(vobjs) FORCE
- $(call if_changed,vdso)
-
-$(obj)/%.so: OBJCOPYFLAGS := -S
-$(obj)/%.so: $(obj)/%.so.dbg FORCE
- $(call if_changed,objcopy)
-
-#
-# Don't omit frame pointers for ease of userspace debugging, but do
-# optimize sibling calls.
-#
-CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
- $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) \
- -fno-omit-frame-pointer -foptimize-sibling-calls
-
-$(vobjs): KBUILD_CFLAGS += $(CFL)
-
-#
-# vDSO code runs in userspace and -pg doesn't help with profiling anyway.
-#
-CFLAGS_REMOVE_vdso-note.o = -pg
-CFLAGS_REMOVE_um_vdso.o = -pg
-
-targets += vdso-syms.lds
-obj-$(VDSO64-y) += vdso-syms.lds
-
-#
-# Match symbols in the DSO that look like VDSO*; produce a file of constants.
-#
-sed-vdsosym := -e 's/^00*/0/' \
- -e 's/^\([0-9a-fA-F]*\) . \(VDSO[a-zA-Z0-9_]*\)$$/\2 = 0x\1;/p'
-quiet_cmd_vdsosym = VDSOSYM $@
-define cmd_vdsosym
- $(NM) $< | LC_ALL=C sed -n $(sed-vdsosym) | LC_ALL=C sort > $@
-endef
-
-$(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
- $(call if_changed,vdsosym)
-
-#
-# The DSO images are built using a special linker script.
-#
-quiet_cmd_vdso = VDSO $@
- cmd_vdso = $(CC) -nostdlib -o $@ \
- $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \
- -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
- sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
-
-VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
-GCOV_PROFILE := n
-
-#
-# Install the unstripped copy of vdso*.so listed in $(vdso-install-y).
-#
-quiet_cmd_vdso_install = INSTALL $@
- cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
-$(vdso-install-y): %.so: $(obj)/%.so.dbg FORCE
- @mkdir -p $(MODLIB)/vdso
- $(call cmd,vdso_install)
-
-PHONY += vdso_install $(vdso-install-y)
-vdso_install: $(vdso-install-y)
diff --git a/arch/um/sys-x86_64/vdso/vdso.S b/arch/um/sys-x86_64/vdso/vdso.S
deleted file mode 100644
index ec82c168..0000000
--- a/arch/um/sys-x86_64/vdso/vdso.S
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <linux/init.h>
-
-__INITDATA
-
- .globl vdso_start, vdso_end
-vdso_start:
- .incbin "arch/um/sys-x86_64/vdso/vdso.so"
-vdso_end:
-
-__FINIT
diff --git a/arch/um/sys-x86_64/vdso/vma.c b/arch/um/sys-x86_64/vdso/vma.c
deleted file mode 100644
index 9495c8d..0000000
--- a/arch/um/sys-x86_64/vdso/vma.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2011 Richard Weinberger <richrd@nod.at>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/page.h>
-#include <linux/init.h>
-
-unsigned int __read_mostly vdso_enabled = 1;
-unsigned long um_vdso_addr;
-
-extern unsigned long task_size;
-extern char vdso_start[], vdso_end[];
-
-static struct page **vdsop;
-
-static int __init init_vdso(void)
-{
- struct page *um_vdso;
-
- BUG_ON(vdso_end - vdso_start > PAGE_SIZE);
-
- um_vdso_addr = task_size - PAGE_SIZE;
-
- vdsop = kmalloc(GFP_KERNEL, sizeof(struct page *));
- if (!vdsop)
- goto oom;
-
- um_vdso = alloc_page(GFP_KERNEL);
- if (!um_vdso) {
- kfree(vdsop);
-
- goto oom;
- }
-
- copy_page(page_address(um_vdso), vdso_start);
- *vdsop = um_vdso;
-
- return 0;
-
-oom:
- printk(KERN_ERR "Cannot allocate vdso\n");
- vdso_enabled = 0;
-
- return -ENOMEM;
-}
-subsys_initcall(init_vdso);
-
-int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
-{
- int err;
- struct mm_struct *mm = current->mm;
-
- if (!vdso_enabled)
- return 0;
-
- down_write(&mm->mmap_sem);
-
- err = install_special_mapping(mm, um_vdso_addr, PAGE_SIZE,
- VM_READ|VM_EXEC|
- VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
- VM_ALWAYSDUMP,
- vdsop);
-
- up_write(&mm->mmap_sem);
-
- return err;
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f497677..77f7a38 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1454,6 +1454,15 @@
def_bool y
depends on X86_PAT
+config ARCH_RANDOM
+ def_bool y
+ prompt "x86 architectural random number generator" if EXPERT
+ ---help---
+ Enable the x86 architectural RDRAND instruction
+ (Intel Bull Mountain technology) to generate random numbers.
+ If supported, this is a high bandwidth, cryptographically
+ secure hardware random number generator.
+
config EFI
bool "EFI runtime service support"
depends on ACPI
@@ -2066,6 +2075,20 @@
- AC adapter status updates
- Battery status updates
+config ALIX
+ bool "PCEngines ALIX System Support (LED setup)"
+ select GPIOLIB
+ ---help---
+ This option enables system support for the PCEngines ALIX.
+ At present this just sets up LEDs for GPIO control on
+ ALIX2/3/6 boards. However, other system specific setup should
+ get added here.
+
+ Note: You must still enable the drivers for GPIO and LED support
+ (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs
+
+ Note: You have to set alix.force=1 for boards with Award BIOS.
+
endif # X86_32
config AMD_NB
diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um
new file mode 100644
index 0000000..36ddec6
--- /dev/null
+++ b/arch/x86/Makefile.um
@@ -0,0 +1,61 @@
+core-y += arch/x86/crypto/
+
+ifeq ($(CONFIG_X86_32),y)
+START := 0x8048000
+
+LDFLAGS += -m elf_i386
+ELF_ARCH := i386
+ELF_FORMAT := elf32-i386
+CHECKFLAGS += -D__i386__
+
+ifeq ("$(origin SUBARCH)", "command line")
+ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)")
+KBUILD_CFLAGS += $(call cc-option,-m32)
+KBUILD_AFLAGS += $(call cc-option,-m32)
+LINK-y += $(call cc-option,-m32)
+
+export LDFLAGS
+endif
+endif
+
+# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
+include $(srctree)/arch/x86/Makefile_32.cpu
+
+# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
+cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
+
+# Prevent sprintf in nfsd from being converted to strcpy and resulting in
+# an unresolved reference.
+cflags-y += -ffreestanding
+
+# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+# a lot more stack due to the lack of sharing of stacklots. Also, gcc
+# 4.3.0 needs -funit-at-a-time for extern inline functions.
+KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
+ echo $(call cc-option,-fno-unit-at-a-time); \
+ else echo $(call cc-option,-funit-at-a-time); fi ;)
+
+KBUILD_CFLAGS += $(cflags-y)
+
+else
+
+START := 0x60000000
+
+KBUILD_CFLAGS += -fno-builtin -m64
+
+CHECKFLAGS += -m64 -D__x86_64__
+KBUILD_AFLAGS += -m64
+LDFLAGS += -m elf_x86_64
+KBUILD_CPPFLAGS += -m64
+
+ELF_ARCH := i386:x86-64
+ELF_FORMAT := elf64-x86-64
+
+# Not on all 64-bit distros /lib is a symlink to /lib64. PLD is an example.
+
+LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64
+LINK-y += -m64
+
+# Do unit-at-a-time unconditionally on x86_64, following the host
+KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
+endif
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index c04f1b7..3537d4b 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -7,21 +7,33 @@
obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o
obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o
+obj-$(CONFIG_CRYPTO_BLOWFISH_X86_64) += blowfish-x86_64.o
obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
+obj-$(CONFIG_CRYPTO_TWOFISH_X86_64_3WAY) += twofish-x86_64-3way.o
obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o
obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o
obj-$(CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL) += ghash-clmulni-intel.o
obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o
+obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
aes-i586-y := aes-i586-asm_32.o aes_glue.o
twofish-i586-y := twofish-i586-asm_32.o twofish_glue.o
salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o
aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o
+blowfish-x86_64-y := blowfish-x86_64-asm_64.o blowfish_glue.o
twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
+twofish-x86_64-3way-y := twofish-x86_64-asm_64-3way.o twofish_glue_3way.o
salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o
aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o fpu.o
ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
+
+# enable AVX support only when $(AS) can actually assemble the instructions
+ifeq ($(call as-instr,vpxor %xmm0$(comma)%xmm1$(comma)%xmm2,yes,no),yes)
+AFLAGS_sha1_ssse3_asm.o += -DSHA1_ENABLE_AVX_SUPPORT
+CFLAGS_sha1_ssse3_glue.o += -DSHA1_ENABLE_AVX_SUPPORT
+endif
+sha1-ssse3-y := sha1_ssse3_asm.o sha1_ssse3_glue.o
diff --git a/arch/x86/crypto/aes_glue.c b/arch/x86/crypto/aes_glue.c
index 49ae9fe..b0b6950 100644
--- a/arch/x86/crypto/aes_glue.c
+++ b/arch/x86/crypto/aes_glue.c
@@ -4,6 +4,7 @@
*/
#include <crypto/aes.h>
+#include <asm/aes.h>
asmlinkage void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in);
asmlinkage void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in);
diff --git a/arch/x86/crypto/blowfish-x86_64-asm_64.S b/arch/x86/crypto/blowfish-x86_64-asm_64.S
new file mode 100644
index 0000000..391d245
--- /dev/null
+++ b/arch/x86/crypto/blowfish-x86_64-asm_64.S
@@ -0,0 +1,390 @@
+/*
+ * Blowfish Cipher Algorithm (x86_64)
+ *
+ * Copyright (C) 2011 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+.file "blowfish-x86_64-asm.S"
+.text
+
+/* structure of crypto context */
+#define p 0
+#define s0 ((16 + 2) * 4)
+#define s1 ((16 + 2 + (1 * 256)) * 4)
+#define s2 ((16 + 2 + (2 * 256)) * 4)
+#define s3 ((16 + 2 + (3 * 256)) * 4)
+
+/* register macros */
+#define CTX %rdi
+#define RIO %rsi
+
+#define RX0 %rax
+#define RX1 %rbx
+#define RX2 %rcx
+#define RX3 %rdx
+
+#define RX0d %eax
+#define RX1d %ebx
+#define RX2d %ecx
+#define RX3d %edx
+
+#define RX0bl %al
+#define RX1bl %bl
+#define RX2bl %cl
+#define RX3bl %dl
+
+#define RX0bh %ah
+#define RX1bh %bh
+#define RX2bh %ch
+#define RX3bh %dh
+
+#define RT0 %rbp
+#define RT1 %rsi
+#define RT2 %r8
+#define RT3 %r9
+
+#define RT0d %ebp
+#define RT1d %esi
+#define RT2d %r8d
+#define RT3d %r9d
+
+#define RKEY %r10
+
+/***********************************************************************
+ * 1-way blowfish
+ ***********************************************************************/
+#define F() \
+ rorq $16, RX0; \
+ movzbl RX0bh, RT0d; \
+ movzbl RX0bl, RT1d; \
+ rolq $16, RX0; \
+ movl s0(CTX,RT0,4), RT0d; \
+ addl s1(CTX,RT1,4), RT0d; \
+ movzbl RX0bh, RT1d; \
+ movzbl RX0bl, RT2d; \
+ rolq $32, RX0; \
+ xorl s2(CTX,RT1,4), RT0d; \
+ addl s3(CTX,RT2,4), RT0d; \
+ xorq RT0, RX0;
+
+#define add_roundkey_enc(n) \
+ xorq p+4*(n)(CTX), RX0;
+
+#define round_enc(n) \
+ add_roundkey_enc(n); \
+ \
+ F(); \
+ F();
+
+#define add_roundkey_dec(n) \
+ movq p+4*(n-1)(CTX), RT0; \
+ rorq $32, RT0; \
+ xorq RT0, RX0;
+
+#define round_dec(n) \
+ add_roundkey_dec(n); \
+ \
+ F(); \
+ F(); \
+
+#define read_block() \
+ movq (RIO), RX0; \
+ rorq $32, RX0; \
+ bswapq RX0;
+
+#define write_block() \
+ bswapq RX0; \
+ movq RX0, (RIO);
+
+#define xor_block() \
+ bswapq RX0; \
+ xorq RX0, (RIO);
+
+.align 8
+.global __blowfish_enc_blk
+.type __blowfish_enc_blk,@function;
+
+__blowfish_enc_blk:
+ /* input:
+ * %rdi: ctx, CTX
+ * %rsi: dst
+ * %rdx: src
+ * %rcx: bool, if true: xor output
+ */
+ movq %rbp, %r11;
+
+ movq %rsi, %r10;
+ movq %rdx, RIO;
+
+ read_block();
+
+ round_enc(0);
+ round_enc(2);
+ round_enc(4);
+ round_enc(6);
+ round_enc(8);
+ round_enc(10);
+ round_enc(12);
+ round_enc(14);
+ add_roundkey_enc(16);
+
+ movq %r11, %rbp;
+
+ movq %r10, RIO;
+ test %cl, %cl;
+ jnz __enc_xor;
+
+ write_block();
+ ret;
+__enc_xor:
+ xor_block();
+ ret;
+
+.align 8
+.global blowfish_dec_blk
+.type blowfish_dec_blk,@function;
+
+blowfish_dec_blk:
+ /* input:
+ * %rdi: ctx, CTX
+ * %rsi: dst
+ * %rdx: src
+ */
+ movq %rbp, %r11;
+
+ movq %rsi, %r10;
+ movq %rdx, RIO;
+
+ read_block();
+
+ round_dec(17);
+ round_dec(15);
+ round_dec(13);
+ round_dec(11);
+ round_dec(9);
+ round_dec(7);
+ round_dec(5);
+ round_dec(3);
+ add_roundkey_dec(1);
+
+ movq %r10, RIO;
+ write_block();
+
+ movq %r11, %rbp;
+
+ ret;
+
+/**********************************************************************
+ 4-way blowfish, four blocks parallel
+ **********************************************************************/
+
+/* F() for 4-way. Slower when used alone/1-way, but faster when used
+ * parallel/4-way (tested on AMD Phenom II & Intel Xeon E7330).
+ */
+#define F4(x) \
+ movzbl x ## bh, RT1d; \
+ movzbl x ## bl, RT3d; \
+ rorq $16, x; \
+ movzbl x ## bh, RT0d; \
+ movzbl x ## bl, RT2d; \
+ rorq $16, x; \
+ movl s0(CTX,RT0,4), RT0d; \
+ addl s1(CTX,RT2,4), RT0d; \
+ xorl s2(CTX,RT1,4), RT0d; \
+ addl s3(CTX,RT3,4), RT0d; \
+ xorq RT0, x;
+
+#define add_preloaded_roundkey4() \
+ xorq RKEY, RX0; \
+ xorq RKEY, RX1; \
+ xorq RKEY, RX2; \
+ xorq RKEY, RX3;
+
+#define preload_roundkey_enc(n) \
+ movq p+4*(n)(CTX), RKEY;
+
+#define add_roundkey_enc4(n) \
+ add_preloaded_roundkey4(); \
+ preload_roundkey_enc(n + 2);
+
+#define round_enc4(n) \
+ add_roundkey_enc4(n); \
+ \
+ F4(RX0); \
+ F4(RX1); \
+ F4(RX2); \
+ F4(RX3); \
+ \
+ F4(RX0); \
+ F4(RX1); \
+ F4(RX2); \
+ F4(RX3);
+
+#define preload_roundkey_dec(n) \
+ movq p+4*((n)-1)(CTX), RKEY; \
+ rorq $32, RKEY;
+
+#define add_roundkey_dec4(n) \
+ add_preloaded_roundkey4(); \
+ preload_roundkey_dec(n - 2);
+
+#define round_dec4(n) \
+ add_roundkey_dec4(n); \
+ \
+ F4(RX0); \
+ F4(RX1); \
+ F4(RX2); \
+ F4(RX3); \
+ \
+ F4(RX0); \
+ F4(RX1); \
+ F4(RX2); \
+ F4(RX3);
+
+#define read_block4() \
+ movq (RIO), RX0; \
+ rorq $32, RX0; \
+ bswapq RX0; \
+ \
+ movq 8(RIO), RX1; \
+ rorq $32, RX1; \
+ bswapq RX1; \
+ \
+ movq 16(RIO), RX2; \
+ rorq $32, RX2; \
+ bswapq RX2; \
+ \
+ movq 24(RIO), RX3; \
+ rorq $32, RX3; \
+ bswapq RX3;
+
+#define write_block4() \
+ bswapq RX0; \
+ movq RX0, (RIO); \
+ \
+ bswapq RX1; \
+ movq RX1, 8(RIO); \
+ \
+ bswapq RX2; \
+ movq RX2, 16(RIO); \
+ \
+ bswapq RX3; \
+ movq RX3, 24(RIO);
+
+#define xor_block4() \
+ bswapq RX0; \
+ xorq RX0, (RIO); \
+ \
+ bswapq RX1; \
+ xorq RX1, 8(RIO); \
+ \
+ bswapq RX2; \
+ xorq RX2, 16(RIO); \
+ \
+ bswapq RX3; \
+ xorq RX3, 24(RIO);
+
+.align 8
+.global __blowfish_enc_blk_4way
+.type __blowfish_enc_blk_4way,@function;
+
+__blowfish_enc_blk_4way:
+ /* input:
+ * %rdi: ctx, CTX
+ * %rsi: dst
+ * %rdx: src
+ * %rcx: bool, if true: xor output
+ */
+ pushq %rbp;
+ pushq %rbx;
+ pushq %rcx;
+
+ preload_roundkey_enc(0);
+
+ movq %rsi, %r11;
+ movq %rdx, RIO;
+
+ read_block4();
+
+ round_enc4(0);
+ round_enc4(2);
+ round_enc4(4);
+ round_enc4(6);
+ round_enc4(8);
+ round_enc4(10);
+ round_enc4(12);
+ round_enc4(14);
+ add_preloaded_roundkey4();
+
+ popq %rbp;
+ movq %r11, RIO;
+
+ test %bpl, %bpl;
+ jnz __enc_xor4;
+
+ write_block4();
+
+ popq %rbx;
+ popq %rbp;
+ ret;
+
+__enc_xor4:
+ xor_block4();
+
+ popq %rbx;
+ popq %rbp;
+ ret;
+
+.align 8
+.global blowfish_dec_blk_4way
+.type blowfish_dec_blk_4way,@function;
+
+blowfish_dec_blk_4way:
+ /* input:
+ * %rdi: ctx, CTX
+ * %rsi: dst
+ * %rdx: src
+ */
+ pushq %rbp;
+ pushq %rbx;
+ preload_roundkey_dec(17);
+
+ movq %rsi, %r11;
+ movq %rdx, RIO;
+
+ read_block4();
+
+ round_dec4(17);
+ round_dec4(15);
+ round_dec4(13);
+ round_dec4(11);
+ round_dec4(9);
+ round_dec4(7);
+ round_dec4(5);
+ round_dec4(3);
+ add_preloaded_roundkey4();
+
+ movq %r11, RIO;
+ write_block4();
+
+ popq %rbx;
+ popq %rbp;
+
+ ret;
+
diff --git a/arch/x86/crypto/blowfish_glue.c b/arch/x86/crypto/blowfish_glue.c
new file mode 100644
index 0000000..b05aa16
--- /dev/null
+++ b/arch/x86/crypto/blowfish_glue.c
@@ -0,0 +1,492 @@
+/*
+ * Glue Code for assembler optimized version of Blowfish
+ *
+ * Copyright (c) 2011 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ * CBC & ECB parts based on code (crypto/cbc.c,ecb.c) by:
+ * Copyright (c) 2006 Herbert Xu <herbert@gondor.apana.org.au>
+ * CTR part based on code (crypto/ctr.c) by:
+ * (C) Copyright IBM Corp. 2007 - Joy Latten <latten@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <crypto/blowfish.h>
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <crypto/algapi.h>
+
+/* regular block cipher functions */
+asmlinkage void __blowfish_enc_blk(struct bf_ctx *ctx, u8 *dst, const u8 *src,
+ bool xor);
+asmlinkage void blowfish_dec_blk(struct bf_ctx *ctx, u8 *dst, const u8 *src);
+
+/* 4-way parallel cipher functions */
+asmlinkage void __blowfish_enc_blk_4way(struct bf_ctx *ctx, u8 *dst,
+ const u8 *src, bool xor);
+asmlinkage void blowfish_dec_blk_4way(struct bf_ctx *ctx, u8 *dst,
+ const u8 *src);
+
+static inline void blowfish_enc_blk(struct bf_ctx *ctx, u8 *dst, const u8 *src)
+{
+ __blowfish_enc_blk(ctx, dst, src, false);
+}
+
+static inline void blowfish_enc_blk_xor(struct bf_ctx *ctx, u8 *dst,
+ const u8 *src)
+{
+ __blowfish_enc_blk(ctx, dst, src, true);
+}
+
+static inline void blowfish_enc_blk_4way(struct bf_ctx *ctx, u8 *dst,
+ const u8 *src)
+{
+ __blowfish_enc_blk_4way(ctx, dst, src, false);
+}
+
+static inline void blowfish_enc_blk_xor_4way(struct bf_ctx *ctx, u8 *dst,
+ const u8 *src)
+{
+ __blowfish_enc_blk_4way(ctx, dst, src, true);
+}
+
+static void blowfish_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ blowfish_enc_blk(crypto_tfm_ctx(tfm), dst, src);
+}
+
+static void blowfish_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ blowfish_dec_blk(crypto_tfm_ctx(tfm), dst, src);
+}
+
+static struct crypto_alg bf_alg = {
+ .cra_name = "blowfish",
+ .cra_driver_name = "blowfish-asm",
+ .cra_priority = 200,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = BF_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct bf_ctx),
+ .cra_alignmask = 3,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(bf_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = BF_MIN_KEY_SIZE,
+ .cia_max_keysize = BF_MAX_KEY_SIZE,
+ .cia_setkey = blowfish_setkey,
+ .cia_encrypt = blowfish_encrypt,
+ .cia_decrypt = blowfish_decrypt,
+ }
+ }
+};
+
+static int ecb_crypt(struct blkcipher_desc *desc, struct blkcipher_walk *walk,
+ void (*fn)(struct bf_ctx *, u8 *, const u8 *),
+ void (*fn_4way)(struct bf_ctx *, u8 *, const u8 *))
+{
+ struct bf_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = BF_BLOCK_SIZE;
+ unsigned int nbytes;
+ int err;
+
+ err = blkcipher_walk_virt(desc, walk);
+
+ while ((nbytes = walk->nbytes)) {
+ u8 *wsrc = walk->src.virt.addr;
+ u8 *wdst = walk->dst.virt.addr;
+
+ /* Process four block batch */
+ if (nbytes >= bsize * 4) {
+ do {
+ fn_4way(ctx, wdst, wsrc);
+
+ wsrc += bsize * 4;
+ wdst += bsize * 4;
+ nbytes -= bsize * 4;
+ } while (nbytes >= bsize * 4);
+
+ if (nbytes < bsize)
+ goto done;
+ }
+
+ /* Handle leftovers */
+ do {
+ fn(ctx, wdst, wsrc);
+
+ wsrc += bsize;
+ wdst += bsize;
+ nbytes -= bsize;
+ } while (nbytes >= bsize);
+
+done:
+ err = blkcipher_walk_done(desc, walk, nbytes);
+ }
+
+ return err;
+}
+
+static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ecb_crypt(desc, &walk, blowfish_enc_blk, blowfish_enc_blk_4way);
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ecb_crypt(desc, &walk, blowfish_dec_blk, blowfish_dec_blk_4way);
+}
+
+static struct crypto_alg blk_ecb_alg = {
+ .cra_name = "ecb(blowfish)",
+ .cra_driver_name = "ecb-blowfish-asm",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = BF_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct bf_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(blk_ecb_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = BF_MIN_KEY_SIZE,
+ .max_keysize = BF_MAX_KEY_SIZE,
+ .setkey = blowfish_setkey,
+ .encrypt = ecb_encrypt,
+ .decrypt = ecb_decrypt,
+ },
+ },
+};
+
+static unsigned int __cbc_encrypt(struct blkcipher_desc *desc,
+ struct blkcipher_walk *walk)
+{
+ struct bf_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = BF_BLOCK_SIZE;
+ unsigned int nbytes = walk->nbytes;
+ u64 *src = (u64 *)walk->src.virt.addr;
+ u64 *dst = (u64 *)walk->dst.virt.addr;
+ u64 *iv = (u64 *)walk->iv;
+
+ do {
+ *dst = *src ^ *iv;
+ blowfish_enc_blk(ctx, (u8 *)dst, (u8 *)dst);
+ iv = dst;
+
+ src += 1;
+ dst += 1;
+ nbytes -= bsize;
+ } while (nbytes >= bsize);
+
+ *(u64 *)walk->iv = *iv;
+ return nbytes;
+}
+
+static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes = __cbc_encrypt(desc, &walk);
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+static unsigned int __cbc_decrypt(struct blkcipher_desc *desc,
+ struct blkcipher_walk *walk)
+{
+ struct bf_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = BF_BLOCK_SIZE;
+ unsigned int nbytes = walk->nbytes;
+ u64 *src = (u64 *)walk->src.virt.addr;
+ u64 *dst = (u64 *)walk->dst.virt.addr;
+ u64 ivs[4 - 1];
+ u64 last_iv;
+
+ /* Start of the last block. */
+ src += nbytes / bsize - 1;
+ dst += nbytes / bsize - 1;
+
+ last_iv = *src;
+
+ /* Process four block batch */
+ if (nbytes >= bsize * 4) {
+ do {
+ nbytes -= bsize * 4 - bsize;
+ src -= 4 - 1;
+ dst -= 4 - 1;
+
+ ivs[0] = src[0];
+ ivs[1] = src[1];
+ ivs[2] = src[2];
+
+ blowfish_dec_blk_4way(ctx, (u8 *)dst, (u8 *)src);
+
+ dst[1] ^= ivs[0];
+ dst[2] ^= ivs[1];
+ dst[3] ^= ivs[2];
+
+ nbytes -= bsize;
+ if (nbytes < bsize)
+ goto done;
+
+ *dst ^= *(src - 1);
+ src -= 1;
+ dst -= 1;
+ } while (nbytes >= bsize * 4);
+
+ if (nbytes < bsize)
+ goto done;
+ }
+
+ /* Handle leftovers */
+ for (;;) {
+ blowfish_dec_blk(ctx, (u8 *)dst, (u8 *)src);
+
+ nbytes -= bsize;
+ if (nbytes < bsize)
+ break;
+
+ *dst ^= *(src - 1);
+ src -= 1;
+ dst -= 1;
+ }
+
+done:
+ *dst ^= *(u64 *)walk->iv;
+ *(u64 *)walk->iv = last_iv;
+
+ return nbytes;
+}
+
+static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes = __cbc_decrypt(desc, &walk);
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+static struct crypto_alg blk_cbc_alg = {
+ .cra_name = "cbc(blowfish)",
+ .cra_driver_name = "cbc-blowfish-asm",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = BF_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct bf_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(blk_cbc_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = BF_MIN_KEY_SIZE,
+ .max_keysize = BF_MAX_KEY_SIZE,
+ .ivsize = BF_BLOCK_SIZE,
+ .setkey = blowfish_setkey,
+ .encrypt = cbc_encrypt,
+ .decrypt = cbc_decrypt,
+ },
+ },
+};
+
+static void ctr_crypt_final(struct bf_ctx *ctx, struct blkcipher_walk *walk)
+{
+ u8 *ctrblk = walk->iv;
+ u8 keystream[BF_BLOCK_SIZE];
+ u8 *src = walk->src.virt.addr;
+ u8 *dst = walk->dst.virt.addr;
+ unsigned int nbytes = walk->nbytes;
+
+ blowfish_enc_blk(ctx, keystream, ctrblk);
+ crypto_xor(keystream, src, nbytes);
+ memcpy(dst, keystream, nbytes);
+
+ crypto_inc(ctrblk, BF_BLOCK_SIZE);
+}
+
+static unsigned int __ctr_crypt(struct blkcipher_desc *desc,
+ struct blkcipher_walk *walk)
+{
+ struct bf_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = BF_BLOCK_SIZE;
+ unsigned int nbytes = walk->nbytes;
+ u64 *src = (u64 *)walk->src.virt.addr;
+ u64 *dst = (u64 *)walk->dst.virt.addr;
+ u64 ctrblk = be64_to_cpu(*(__be64 *)walk->iv);
+ __be64 ctrblocks[4];
+
+ /* Process four block batch */
+ if (nbytes >= bsize * 4) {
+ do {
+ if (dst != src) {
+ dst[0] = src[0];
+ dst[1] = src[1];
+ dst[2] = src[2];
+ dst[3] = src[3];
+ }
+
+ /* create ctrblks for parallel encrypt */
+ ctrblocks[0] = cpu_to_be64(ctrblk++);
+ ctrblocks[1] = cpu_to_be64(ctrblk++);
+ ctrblocks[2] = cpu_to_be64(ctrblk++);
+ ctrblocks[3] = cpu_to_be64(ctrblk++);
+
+ blowfish_enc_blk_xor_4way(ctx, (u8 *)dst,
+ (u8 *)ctrblocks);
+
+ src += 4;
+ dst += 4;
+ } while ((nbytes -= bsize * 4) >= bsize * 4);
+
+ if (nbytes < bsize)
+ goto done;
+ }
+
+ /* Handle leftovers */
+ do {
+ if (dst != src)
+ *dst = *src;
+
+ ctrblocks[0] = cpu_to_be64(ctrblk++);
+
+ blowfish_enc_blk_xor(ctx, (u8 *)dst, (u8 *)ctrblocks);
+
+ src += 1;
+ dst += 1;
+ } while ((nbytes -= bsize) >= bsize);
+
+done:
+ *(__be64 *)walk->iv = cpu_to_be64(ctrblk);
+ return nbytes;
+}
+
+static int ctr_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt_block(desc, &walk, BF_BLOCK_SIZE);
+
+ while ((nbytes = walk.nbytes) >= BF_BLOCK_SIZE) {
+ nbytes = __ctr_crypt(desc, &walk);
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ if (walk.nbytes) {
+ ctr_crypt_final(crypto_blkcipher_ctx(desc->tfm), &walk);
+ err = blkcipher_walk_done(desc, &walk, 0);
+ }
+
+ return err;
+}
+
+static struct crypto_alg blk_ctr_alg = {
+ .cra_name = "ctr(blowfish)",
+ .cra_driver_name = "ctr-blowfish-asm",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct bf_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(blk_ctr_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = BF_MIN_KEY_SIZE,
+ .max_keysize = BF_MAX_KEY_SIZE,
+ .ivsize = BF_BLOCK_SIZE,
+ .setkey = blowfish_setkey,
+ .encrypt = ctr_crypt,
+ .decrypt = ctr_crypt,
+ },
+ },
+};
+
+static int __init init(void)
+{
+ int err;
+
+ err = crypto_register_alg(&bf_alg);
+ if (err)
+ goto bf_err;
+ err = crypto_register_alg(&blk_ecb_alg);
+ if (err)
+ goto ecb_err;
+ err = crypto_register_alg(&blk_cbc_alg);
+ if (err)
+ goto cbc_err;
+ err = crypto_register_alg(&blk_ctr_alg);
+ if (err)
+ goto ctr_err;
+
+ return 0;
+
+ctr_err:
+ crypto_unregister_alg(&blk_cbc_alg);
+cbc_err:
+ crypto_unregister_alg(&blk_ecb_alg);
+ecb_err:
+ crypto_unregister_alg(&bf_alg);
+bf_err:
+ return err;
+}
+
+static void __exit fini(void)
+{
+ crypto_unregister_alg(&blk_ctr_alg);
+ crypto_unregister_alg(&blk_cbc_alg);
+ crypto_unregister_alg(&blk_ecb_alg);
+ crypto_unregister_alg(&bf_alg);
+}
+
+module_init(init);
+module_exit(fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Blowfish Cipher Algorithm, asm optimized");
+MODULE_ALIAS("blowfish");
+MODULE_ALIAS("blowfish-asm");
diff --git a/arch/x86/crypto/sha1_ssse3_asm.S b/arch/x86/crypto/sha1_ssse3_asm.S
new file mode 100644
index 0000000..b2c2f57
--- /dev/null
+++ b/arch/x86/crypto/sha1_ssse3_asm.S
@@ -0,0 +1,558 @@
+/*
+ * This is a SIMD SHA-1 implementation. It requires the Intel(R) Supplemental
+ * SSE3 instruction set extensions introduced in Intel Core Microarchitecture
+ * processors. CPUs supporting Intel(R) AVX extensions will get an additional
+ * boost.
+ *
+ * This work was inspired by the vectorized implementation of Dean Gaudet.
+ * Additional information on it can be found at:
+ * http://www.arctic.org/~dean/crypto/sha1.html
+ *
+ * It was improved upon with more efficient vectorization of the message
+ * scheduling. This implementation has also been optimized for all current and
+ * several future generations of Intel CPUs.
+ *
+ * See this article for more information about the implementation details:
+ * http://software.intel.com/en-us/articles/improving-the-performance-of-the-secure-hash-algorithm-1/
+ *
+ * Copyright (C) 2010, Intel Corp.
+ * Authors: Maxim Locktyukhin <maxim.locktyukhin@intel.com>
+ * Ronen Zohar <ronen.zohar@intel.com>
+ *
+ * Converted to AT&T syntax and adapted for inclusion in the Linux kernel:
+ * Author: Mathias Krause <minipli@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define CTX %rdi // arg1
+#define BUF %rsi // arg2
+#define CNT %rdx // arg3
+
+#define REG_A %ecx
+#define REG_B %esi
+#define REG_C %edi
+#define REG_D %ebp
+#define REG_E %edx
+
+#define REG_T1 %eax
+#define REG_T2 %ebx
+
+#define K_BASE %r8
+#define HASH_PTR %r9
+#define BUFFER_PTR %r10
+#define BUFFER_END %r11
+
+#define W_TMP1 %xmm0
+#define W_TMP2 %xmm9
+
+#define W0 %xmm1
+#define W4 %xmm2
+#define W8 %xmm3
+#define W12 %xmm4
+#define W16 %xmm5
+#define W20 %xmm6
+#define W24 %xmm7
+#define W28 %xmm8
+
+#define XMM_SHUFB_BSWAP %xmm10
+
+/* we keep window of 64 w[i]+K pre-calculated values in a circular buffer */
+#define WK(t) (((t) & 15) * 4)(%rsp)
+#define W_PRECALC_AHEAD 16
+
+/*
+ * This macro implements the SHA-1 function's body for single 64-byte block
+ * param: function's name
+ */
+.macro SHA1_VECTOR_ASM name
+ .global \name
+ .type \name, @function
+ .align 32
+\name:
+ push %rbx
+ push %rbp
+ push %r12
+
+ mov %rsp, %r12
+ sub $64, %rsp # allocate workspace
+ and $~15, %rsp # align stack
+
+ mov CTX, HASH_PTR
+ mov BUF, BUFFER_PTR
+
+ shl $6, CNT # multiply by 64
+ add BUF, CNT
+ mov CNT, BUFFER_END
+
+ lea K_XMM_AR(%rip), K_BASE
+ xmm_mov BSWAP_SHUFB_CTL(%rip), XMM_SHUFB_BSWAP
+
+ SHA1_PIPELINED_MAIN_BODY
+
+ # cleanup workspace
+ mov $8, %ecx
+ mov %rsp, %rdi
+ xor %rax, %rax
+ rep stosq
+
+ mov %r12, %rsp # deallocate workspace
+
+ pop %r12
+ pop %rbp
+ pop %rbx
+ ret
+
+ .size \name, .-\name
+.endm
+
+/*
+ * This macro implements 80 rounds of SHA-1 for one 64-byte block
+ */
+.macro SHA1_PIPELINED_MAIN_BODY
+ INIT_REGALLOC
+
+ mov (HASH_PTR), A
+ mov 4(HASH_PTR), B
+ mov 8(HASH_PTR), C
+ mov 12(HASH_PTR), D
+ mov 16(HASH_PTR), E
+
+ .set i, 0
+ .rept W_PRECALC_AHEAD
+ W_PRECALC i
+ .set i, (i+1)
+ .endr
+
+.align 4
+1:
+ RR F1,A,B,C,D,E,0
+ RR F1,D,E,A,B,C,2
+ RR F1,B,C,D,E,A,4
+ RR F1,E,A,B,C,D,6
+ RR F1,C,D,E,A,B,8
+
+ RR F1,A,B,C,D,E,10
+ RR F1,D,E,A,B,C,12
+ RR F1,B,C,D,E,A,14
+ RR F1,E,A,B,C,D,16
+ RR F1,C,D,E,A,B,18
+
+ RR F2,A,B,C,D,E,20
+ RR F2,D,E,A,B,C,22
+ RR F2,B,C,D,E,A,24
+ RR F2,E,A,B,C,D,26
+ RR F2,C,D,E,A,B,28
+
+ RR F2,A,B,C,D,E,30
+ RR F2,D,E,A,B,C,32
+ RR F2,B,C,D,E,A,34
+ RR F2,E,A,B,C,D,36
+ RR F2,C,D,E,A,B,38
+
+ RR F3,A,B,C,D,E,40
+ RR F3,D,E,A,B,C,42
+ RR F3,B,C,D,E,A,44
+ RR F3,E,A,B,C,D,46
+ RR F3,C,D,E,A,B,48
+
+ RR F3,A,B,C,D,E,50
+ RR F3,D,E,A,B,C,52
+ RR F3,B,C,D,E,A,54
+ RR F3,E,A,B,C,D,56
+ RR F3,C,D,E,A,B,58
+
+ add $64, BUFFER_PTR # move to the next 64-byte block
+ cmp BUFFER_END, BUFFER_PTR # if the current is the last one use
+ cmovae K_BASE, BUFFER_PTR # dummy source to avoid buffer overrun
+
+ RR F4,A,B,C,D,E,60
+ RR F4,D,E,A,B,C,62
+ RR F4,B,C,D,E,A,64
+ RR F4,E,A,B,C,D,66
+ RR F4,C,D,E,A,B,68
+
+ RR F4,A,B,C,D,E,70
+ RR F4,D,E,A,B,C,72
+ RR F4,B,C,D,E,A,74
+ RR F4,E,A,B,C,D,76
+ RR F4,C,D,E,A,B,78
+
+ UPDATE_HASH (HASH_PTR), A
+ UPDATE_HASH 4(HASH_PTR), B
+ UPDATE_HASH 8(HASH_PTR), C
+ UPDATE_HASH 12(HASH_PTR), D
+ UPDATE_HASH 16(HASH_PTR), E
+
+ RESTORE_RENAMED_REGS
+ cmp K_BASE, BUFFER_PTR # K_BASE means, we reached the end
+ jne 1b
+.endm
+
+.macro INIT_REGALLOC
+ .set A, REG_A
+ .set B, REG_B
+ .set C, REG_C
+ .set D, REG_D
+ .set E, REG_E
+ .set T1, REG_T1
+ .set T2, REG_T2
+.endm
+
+.macro RESTORE_RENAMED_REGS
+ # order is important (REG_C is where it should be)
+ mov B, REG_B
+ mov D, REG_D
+ mov A, REG_A
+ mov E, REG_E
+.endm
+
+.macro SWAP_REG_NAMES a, b
+ .set _T, \a
+ .set \a, \b
+ .set \b, _T
+.endm
+
+.macro F1 b, c, d
+ mov \c, T1
+ SWAP_REG_NAMES \c, T1
+ xor \d, T1
+ and \b, T1
+ xor \d, T1
+.endm
+
+.macro F2 b, c, d
+ mov \d, T1
+ SWAP_REG_NAMES \d, T1
+ xor \c, T1
+ xor \b, T1
+.endm
+
+.macro F3 b, c ,d
+ mov \c, T1
+ SWAP_REG_NAMES \c, T1
+ mov \b, T2
+ or \b, T1
+ and \c, T2
+ and \d, T1
+ or T2, T1
+.endm
+
+.macro F4 b, c, d
+ F2 \b, \c, \d
+.endm
+
+.macro UPDATE_HASH hash, val
+ add \hash, \val
+ mov \val, \hash
+.endm
+
+/*
+ * RR does two rounds of SHA-1 back to back with W[] pre-calc
+ * t1 = F(b, c, d); e += w(i)
+ * e += t1; b <<= 30; d += w(i+1);
+ * t1 = F(a, b, c);
+ * d += t1; a <<= 5;
+ * e += a;
+ * t1 = e; a >>= 7;
+ * t1 <<= 5;
+ * d += t1;
+ */
+.macro RR F, a, b, c, d, e, round
+ add WK(\round), \e
+ \F \b, \c, \d # t1 = F(b, c, d);
+ W_PRECALC (\round + W_PRECALC_AHEAD)
+ rol $30, \b
+ add T1, \e
+ add WK(\round + 1), \d
+
+ \F \a, \b, \c
+ W_PRECALC (\round + W_PRECALC_AHEAD + 1)
+ rol $5, \a
+ add \a, \e
+ add T1, \d
+ ror $7, \a # (a <<r 5) >>r 7) => a <<r 30)
+
+ mov \e, T1
+ SWAP_REG_NAMES \e, T1
+
+ rol $5, T1
+ add T1, \d
+
+ # write: \a, \b
+ # rotate: \a<=\d, \b<=\e, \c<=\a, \d<=\b, \e<=\c
+.endm
+
+.macro W_PRECALC r
+ .set i, \r
+
+ .if (i < 20)
+ .set K_XMM, 0
+ .elseif (i < 40)
+ .set K_XMM, 16
+ .elseif (i < 60)
+ .set K_XMM, 32
+ .elseif (i < 80)
+ .set K_XMM, 48
+ .endif
+
+ .if ((i < 16) || ((i >= 80) && (i < (80 + W_PRECALC_AHEAD))))
+ .set i, ((\r) % 80) # pre-compute for the next iteration
+ .if (i == 0)
+ W_PRECALC_RESET
+ .endif
+ W_PRECALC_00_15
+ .elseif (i<32)
+ W_PRECALC_16_31
+ .elseif (i < 80) // rounds 32-79
+ W_PRECALC_32_79
+ .endif
+.endm
+
+.macro W_PRECALC_RESET
+ .set W, W0
+ .set W_minus_04, W4
+ .set W_minus_08, W8
+ .set W_minus_12, W12
+ .set W_minus_16, W16
+ .set W_minus_20, W20
+ .set W_minus_24, W24
+ .set W_minus_28, W28
+ .set W_minus_32, W
+.endm
+
+.macro W_PRECALC_ROTATE
+ .set W_minus_32, W_minus_28
+ .set W_minus_28, W_minus_24
+ .set W_minus_24, W_minus_20
+ .set W_minus_20, W_minus_16
+ .set W_minus_16, W_minus_12
+ .set W_minus_12, W_minus_08
+ .set W_minus_08, W_minus_04
+ .set W_minus_04, W
+ .set W, W_minus_32
+.endm
+
+.macro W_PRECALC_SSSE3
+
+.macro W_PRECALC_00_15
+ W_PRECALC_00_15_SSSE3
+.endm
+.macro W_PRECALC_16_31
+ W_PRECALC_16_31_SSSE3
+.endm
+.macro W_PRECALC_32_79
+ W_PRECALC_32_79_SSSE3
+.endm
+
+/* message scheduling pre-compute for rounds 0-15 */
+.macro W_PRECALC_00_15_SSSE3
+ .if ((i & 3) == 0)
+ movdqu (i*4)(BUFFER_PTR), W_TMP1
+ .elseif ((i & 3) == 1)
+ pshufb XMM_SHUFB_BSWAP, W_TMP1
+ movdqa W_TMP1, W
+ .elseif ((i & 3) == 2)
+ paddd (K_BASE), W_TMP1
+ .elseif ((i & 3) == 3)
+ movdqa W_TMP1, WK(i&~3)
+ W_PRECALC_ROTATE
+ .endif
+.endm
+
+/* message scheduling pre-compute for rounds 16-31
+ *
+ * - calculating last 32 w[i] values in 8 XMM registers
+ * - pre-calculate K+w[i] values and store to mem, for later load by ALU add
+ * instruction
+ *
+ * some "heavy-lifting" vectorization for rounds 16-31 due to w[i]->w[i-3]
+ * dependency, but improves for 32-79
+ */
+.macro W_PRECALC_16_31_SSSE3
+ # blended scheduling of vector and scalar instruction streams, one 4-wide
+ # vector iteration / 4 scalar rounds
+ .if ((i & 3) == 0)
+ movdqa W_minus_12, W
+ palignr $8, W_minus_16, W # w[i-14]
+ movdqa W_minus_04, W_TMP1
+ psrldq $4, W_TMP1 # w[i-3]
+ pxor W_minus_08, W
+ .elseif ((i & 3) == 1)
+ pxor W_minus_16, W_TMP1
+ pxor W_TMP1, W
+ movdqa W, W_TMP2
+ movdqa W, W_TMP1
+ pslldq $12, W_TMP2
+ .elseif ((i & 3) == 2)
+ psrld $31, W
+ pslld $1, W_TMP1
+ por W, W_TMP1
+ movdqa W_TMP2, W
+ psrld $30, W_TMP2
+ pslld $2, W
+ .elseif ((i & 3) == 3)
+ pxor W, W_TMP1
+ pxor W_TMP2, W_TMP1
+ movdqa W_TMP1, W
+ paddd K_XMM(K_BASE), W_TMP1
+ movdqa W_TMP1, WK(i&~3)
+ W_PRECALC_ROTATE
+ .endif
+.endm
+
+/* message scheduling pre-compute for rounds 32-79
+ *
+ * in SHA-1 specification: w[i] = (w[i-3] ^ w[i-8] ^ w[i-14] ^ w[i-16]) rol 1
+ * instead we do equal: w[i] = (w[i-6] ^ w[i-16] ^ w[i-28] ^ w[i-32]) rol 2
+ * allows more efficient vectorization since w[i]=>w[i-3] dependency is broken
+ */
+.macro W_PRECALC_32_79_SSSE3
+ .if ((i & 3) == 0)
+ movdqa W_minus_04, W_TMP1
+ pxor W_minus_28, W # W is W_minus_32 before xor
+ palignr $8, W_minus_08, W_TMP1
+ .elseif ((i & 3) == 1)
+ pxor W_minus_16, W
+ pxor W_TMP1, W
+ movdqa W, W_TMP1
+ .elseif ((i & 3) == 2)
+ psrld $30, W
+ pslld $2, W_TMP1
+ por W, W_TMP1
+ .elseif ((i & 3) == 3)
+ movdqa W_TMP1, W
+ paddd K_XMM(K_BASE), W_TMP1
+ movdqa W_TMP1, WK(i&~3)
+ W_PRECALC_ROTATE
+ .endif
+.endm
+
+.endm // W_PRECALC_SSSE3
+
+
+#define K1 0x5a827999
+#define K2 0x6ed9eba1
+#define K3 0x8f1bbcdc
+#define K4 0xca62c1d6
+
+.section .rodata
+.align 16
+
+K_XMM_AR:
+ .long K1, K1, K1, K1
+ .long K2, K2, K2, K2
+ .long K3, K3, K3, K3
+ .long K4, K4, K4, K4
+
+BSWAP_SHUFB_CTL:
+ .long 0x00010203
+ .long 0x04050607
+ .long 0x08090a0b
+ .long 0x0c0d0e0f
+
+
+.section .text
+
+W_PRECALC_SSSE3
+.macro xmm_mov a, b
+ movdqu \a,\b
+.endm
+
+/* SSSE3 optimized implementation:
+ * extern "C" void sha1_transform_ssse3(u32 *digest, const char *data, u32 *ws,
+ * unsigned int rounds);
+ */
+SHA1_VECTOR_ASM sha1_transform_ssse3
+
+#ifdef SHA1_ENABLE_AVX_SUPPORT
+
+.macro W_PRECALC_AVX
+
+.purgem W_PRECALC_00_15
+.macro W_PRECALC_00_15
+ W_PRECALC_00_15_AVX
+.endm
+.purgem W_PRECALC_16_31
+.macro W_PRECALC_16_31
+ W_PRECALC_16_31_AVX
+.endm
+.purgem W_PRECALC_32_79
+.macro W_PRECALC_32_79
+ W_PRECALC_32_79_AVX
+.endm
+
+.macro W_PRECALC_00_15_AVX
+ .if ((i & 3) == 0)
+ vmovdqu (i*4)(BUFFER_PTR), W_TMP1
+ .elseif ((i & 3) == 1)
+ vpshufb XMM_SHUFB_BSWAP, W_TMP1, W
+ .elseif ((i & 3) == 2)
+ vpaddd (K_BASE), W, W_TMP1
+ .elseif ((i & 3) == 3)
+ vmovdqa W_TMP1, WK(i&~3)
+ W_PRECALC_ROTATE
+ .endif
+.endm
+
+.macro W_PRECALC_16_31_AVX
+ .if ((i & 3) == 0)
+ vpalignr $8, W_minus_16, W_minus_12, W # w[i-14]
+ vpsrldq $4, W_minus_04, W_TMP1 # w[i-3]
+ vpxor W_minus_08, W, W
+ vpxor W_minus_16, W_TMP1, W_TMP1
+ .elseif ((i & 3) == 1)
+ vpxor W_TMP1, W, W
+ vpslldq $12, W, W_TMP2
+ vpslld $1, W, W_TMP1
+ .elseif ((i & 3) == 2)
+ vpsrld $31, W, W
+ vpor W, W_TMP1, W_TMP1
+ vpslld $2, W_TMP2, W
+ vpsrld $30, W_TMP2, W_TMP2
+ .elseif ((i & 3) == 3)
+ vpxor W, W_TMP1, W_TMP1
+ vpxor W_TMP2, W_TMP1, W
+ vpaddd K_XMM(K_BASE), W, W_TMP1
+ vmovdqu W_TMP1, WK(i&~3)
+ W_PRECALC_ROTATE
+ .endif
+.endm
+
+.macro W_PRECALC_32_79_AVX
+ .if ((i & 3) == 0)
+ vpalignr $8, W_minus_08, W_minus_04, W_TMP1
+ vpxor W_minus_28, W, W # W is W_minus_32 before xor
+ .elseif ((i & 3) == 1)
+ vpxor W_minus_16, W_TMP1, W_TMP1
+ vpxor W_TMP1, W, W
+ .elseif ((i & 3) == 2)
+ vpslld $2, W, W_TMP1
+ vpsrld $30, W, W
+ vpor W, W_TMP1, W
+ .elseif ((i & 3) == 3)
+ vpaddd K_XMM(K_BASE), W, W_TMP1
+ vmovdqu W_TMP1, WK(i&~3)
+ W_PRECALC_ROTATE
+ .endif
+.endm
+
+.endm // W_PRECALC_AVX
+
+W_PRECALC_AVX
+.purgem xmm_mov
+.macro xmm_mov a, b
+ vmovdqu \a,\b
+.endm
+
+
+/* AVX optimized implementation:
+ * extern "C" void sha1_transform_avx(u32 *digest, const char *data, u32 *ws,
+ * unsigned int rounds);
+ */
+SHA1_VECTOR_ASM sha1_transform_avx
+
+#endif
diff --git a/arch/x86/crypto/sha1_ssse3_glue.c b/arch/x86/crypto/sha1_ssse3_glue.c
new file mode 100644
index 0000000..f916499d
--- /dev/null
+++ b/arch/x86/crypto/sha1_ssse3_glue.c
@@ -0,0 +1,240 @@
+/*
+ * Cryptographic API.
+ *
+ * Glue code for the SHA1 Secure Hash Algorithm assembler implementation using
+ * Supplemental SSE3 instructions.
+ *
+ * This file is based on sha1_generic.c
+ *
+ * Copyright (c) Alan Smithee.
+ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
+ * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
+ * Copyright (c) Mathias Krause <minipli@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <crypto/sha.h>
+#include <asm/byteorder.h>
+#include <asm/i387.h>
+#include <asm/xcr.h>
+#include <asm/xsave.h>
+
+
+asmlinkage void sha1_transform_ssse3(u32 *digest, const char *data,
+ unsigned int rounds);
+#ifdef SHA1_ENABLE_AVX_SUPPORT
+asmlinkage void sha1_transform_avx(u32 *digest, const char *data,
+ unsigned int rounds);
+#endif
+
+static asmlinkage void (*sha1_transform_asm)(u32 *, const char *, unsigned int);
+
+
+static int sha1_ssse3_init(struct shash_desc *desc)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ *sctx = (struct sha1_state){
+ .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 },
+ };
+
+ return 0;
+}
+
+static int __sha1_ssse3_update(struct shash_desc *desc, const u8 *data,
+ unsigned int len, unsigned int partial)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+ unsigned int done = 0;
+
+ sctx->count += len;
+
+ if (partial) {
+ done = SHA1_BLOCK_SIZE - partial;
+ memcpy(sctx->buffer + partial, data, done);
+ sha1_transform_asm(sctx->state, sctx->buffer, 1);
+ }
+
+ if (len - done >= SHA1_BLOCK_SIZE) {
+ const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE;
+
+ sha1_transform_asm(sctx->state, data + done, rounds);
+ done += rounds * SHA1_BLOCK_SIZE;
+ }
+
+ memcpy(sctx->buffer, data + done, len - done);
+
+ return 0;
+}
+
+static int sha1_ssse3_update(struct shash_desc *desc, const u8 *data,
+ unsigned int len)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+ unsigned int partial = sctx->count % SHA1_BLOCK_SIZE;
+ int res;
+
+ /* Handle the fast case right here */
+ if (partial + len < SHA1_BLOCK_SIZE) {
+ sctx->count += len;
+ memcpy(sctx->buffer + partial, data, len);
+
+ return 0;
+ }
+
+ if (!irq_fpu_usable()) {
+ res = crypto_sha1_update(desc, data, len);
+ } else {
+ kernel_fpu_begin();
+ res = __sha1_ssse3_update(desc, data, len, partial);
+ kernel_fpu_end();
+ }
+
+ return res;
+}
+
+
+/* Add padding and return the message digest. */
+static int sha1_ssse3_final(struct shash_desc *desc, u8 *out)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+ unsigned int i, index, padlen;
+ __be32 *dst = (__be32 *)out;
+ __be64 bits;
+ static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, };
+
+ bits = cpu_to_be64(sctx->count << 3);
+
+ /* Pad out to 56 mod 64 and append length */
+ index = sctx->count % SHA1_BLOCK_SIZE;
+ padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index);
+ if (!irq_fpu_usable()) {
+ crypto_sha1_update(desc, padding, padlen);
+ crypto_sha1_update(desc, (const u8 *)&bits, sizeof(bits));
+ } else {
+ kernel_fpu_begin();
+ /* We need to fill a whole block for __sha1_ssse3_update() */
+ if (padlen <= 56) {
+ sctx->count += padlen;
+ memcpy(sctx->buffer + index, padding, padlen);
+ } else {
+ __sha1_ssse3_update(desc, padding, padlen, index);
+ }
+ __sha1_ssse3_update(desc, (const u8 *)&bits, sizeof(bits), 56);
+ kernel_fpu_end();
+ }
+
+ /* Store state in digest */
+ for (i = 0; i < 5; i++)
+ dst[i] = cpu_to_be32(sctx->state[i]);
+
+ /* Wipe context */
+ memset(sctx, 0, sizeof(*sctx));
+
+ return 0;
+}
+
+static int sha1_ssse3_export(struct shash_desc *desc, void *out)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+
+ return 0;
+}
+
+static int sha1_ssse3_import(struct shash_desc *desc, const void *in)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+
+ return 0;
+}
+
+static struct shash_alg alg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .init = sha1_ssse3_init,
+ .update = sha1_ssse3_update,
+ .final = sha1_ssse3_final,
+ .export = sha1_ssse3_export,
+ .import = sha1_ssse3_import,
+ .descsize = sizeof(struct sha1_state),
+ .statesize = sizeof(struct sha1_state),
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name= "sha1-ssse3",
+ .cra_priority = 150,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+#ifdef SHA1_ENABLE_AVX_SUPPORT
+static bool __init avx_usable(void)
+{
+ u64 xcr0;
+
+ if (!cpu_has_avx || !cpu_has_osxsave)
+ return false;
+
+ xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK);
+ if ((xcr0 & (XSTATE_SSE | XSTATE_YMM)) != (XSTATE_SSE | XSTATE_YMM)) {
+ pr_info("AVX detected but unusable.\n");
+
+ return false;
+ }
+
+ return true;
+}
+#endif
+
+static int __init sha1_ssse3_mod_init(void)
+{
+ /* test for SSSE3 first */
+ if (cpu_has_ssse3)
+ sha1_transform_asm = sha1_transform_ssse3;
+
+#ifdef SHA1_ENABLE_AVX_SUPPORT
+ /* allow AVX to override SSSE3, it's a little faster */
+ if (avx_usable())
+ sha1_transform_asm = sha1_transform_avx;
+#endif
+
+ if (sha1_transform_asm) {
+ pr_info("Using %s optimized SHA-1 implementation\n",
+ sha1_transform_asm == sha1_transform_ssse3 ? "SSSE3"
+ : "AVX");
+ return crypto_register_shash(&alg);
+ }
+ pr_info("Neither AVX nor SSSE3 is available/usable.\n");
+
+ return -ENODEV;
+}
+
+static void __exit sha1_ssse3_mod_fini(void)
+{
+ crypto_unregister_shash(&alg);
+}
+
+module_init(sha1_ssse3_mod_init);
+module_exit(sha1_ssse3_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, Supplemental SSE3 accelerated");
+
+MODULE_ALIAS("sha1");
diff --git a/arch/x86/crypto/twofish-i586-asm_32.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 575331c..658af4b 100644
--- a/arch/x86/crypto/twofish-i586-asm_32.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
@@ -26,7 +26,7 @@
#define in_blk 12 /* input byte array address parameter*/
#define out_blk 8 /* output byte array address parameter*/
-#define tfm 4 /* Twofish context structure */
+#define ctx 4 /* Twofish context structure */
#define a_offset 0
#define b_offset 4
@@ -229,8 +229,8 @@
push %esi
push %edi
- mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */
- add $crypto_tfm_ctx_offset, %ebp /* ctx address */
+ mov ctx + 16(%esp), %ebp /* abuse the base pointer: set new base
+ * pointer to the ctx address */
mov in_blk+16(%esp),%edi /* input address in edi */
mov (%edi), %eax
@@ -285,8 +285,8 @@
push %edi
- mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */
- add $crypto_tfm_ctx_offset, %ebp /* ctx address */
+ mov ctx + 16(%esp), %ebp /* abuse the base pointer: set new base
+ * pointer to the ctx address */
mov in_blk+16(%esp),%edi /* input address in edi */
mov (%edi), %eax
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64-3way.S b/arch/x86/crypto/twofish-x86_64-asm_64-3way.S
new file mode 100644
index 0000000..5b012a2
--- /dev/null
+++ b/arch/x86/crypto/twofish-x86_64-asm_64-3way.S
@@ -0,0 +1,316 @@
+/*
+ * Twofish Cipher 3-way parallel algorithm (x86_64)
+ *
+ * Copyright (C) 2011 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+.file "twofish-x86_64-asm-3way.S"
+.text
+
+/* structure of crypto context */
+#define s0 0
+#define s1 1024
+#define s2 2048
+#define s3 3072
+#define w 4096
+#define k 4128
+
+/**********************************************************************
+ 3-way twofish
+ **********************************************************************/
+#define CTX %rdi
+#define RIO %rdx
+
+#define RAB0 %rax
+#define RAB1 %rbx
+#define RAB2 %rcx
+
+#define RAB0d %eax
+#define RAB1d %ebx
+#define RAB2d %ecx
+
+#define RAB0bh %ah
+#define RAB1bh %bh
+#define RAB2bh %ch
+
+#define RAB0bl %al
+#define RAB1bl %bl
+#define RAB2bl %cl
+
+#define RCD0 %r8
+#define RCD1 %r9
+#define RCD2 %r10
+
+#define RCD0d %r8d
+#define RCD1d %r9d
+#define RCD2d %r10d
+
+#define RX0 %rbp
+#define RX1 %r11
+#define RX2 %r12
+
+#define RX0d %ebp
+#define RX1d %r11d
+#define RX2d %r12d
+
+#define RY0 %r13
+#define RY1 %r14
+#define RY2 %r15
+
+#define RY0d %r13d
+#define RY1d %r14d
+#define RY2d %r15d
+
+#define RT0 %rdx
+#define RT1 %rsi
+
+#define RT0d %edx
+#define RT1d %esi
+
+#define do16bit_ror(rot, op1, op2, T0, T1, tmp1, tmp2, ab, dst) \
+ movzbl ab ## bl, tmp2 ## d; \
+ movzbl ab ## bh, tmp1 ## d; \
+ rorq $(rot), ab; \
+ op1##l T0(CTX, tmp2, 4), dst ## d; \
+ op2##l T1(CTX, tmp1, 4), dst ## d;
+
+/*
+ * Combined G1 & G2 function. Reordered with help of rotates to have moves
+ * at begining.
+ */
+#define g1g2_3(ab, cd, Tx0, Tx1, Tx2, Tx3, Ty0, Ty1, Ty2, Ty3, x, y) \
+ /* G1,1 && G2,1 */ \
+ do16bit_ror(32, mov, xor, Tx0, Tx1, RT0, x ## 0, ab ## 0, x ## 0); \
+ do16bit_ror(48, mov, xor, Ty1, Ty2, RT0, y ## 0, ab ## 0, y ## 0); \
+ \
+ do16bit_ror(32, mov, xor, Tx0, Tx1, RT0, x ## 1, ab ## 1, x ## 1); \
+ do16bit_ror(48, mov, xor, Ty1, Ty2, RT0, y ## 1, ab ## 1, y ## 1); \
+ \
+ do16bit_ror(32, mov, xor, Tx0, Tx1, RT0, x ## 2, ab ## 2, x ## 2); \
+ do16bit_ror(48, mov, xor, Ty1, Ty2, RT0, y ## 2, ab ## 2, y ## 2); \
+ \
+ /* G1,2 && G2,2 */ \
+ do16bit_ror(32, xor, xor, Tx2, Tx3, RT0, RT1, ab ## 0, x ## 0); \
+ do16bit_ror(16, xor, xor, Ty3, Ty0, RT0, RT1, ab ## 0, y ## 0); \
+ xchgq cd ## 0, ab ## 0; \
+ \
+ do16bit_ror(32, xor, xor, Tx2, Tx3, RT0, RT1, ab ## 1, x ## 1); \
+ do16bit_ror(16, xor, xor, Ty3, Ty0, RT0, RT1, ab ## 1, y ## 1); \
+ xchgq cd ## 1, ab ## 1; \
+ \
+ do16bit_ror(32, xor, xor, Tx2, Tx3, RT0, RT1, ab ## 2, x ## 2); \
+ do16bit_ror(16, xor, xor, Ty3, Ty0, RT0, RT1, ab ## 2, y ## 2); \
+ xchgq cd ## 2, ab ## 2;
+
+#define enc_round_end(ab, x, y, n) \
+ addl y ## d, x ## d; \
+ addl x ## d, y ## d; \
+ addl k+4*(2*(n))(CTX), x ## d; \
+ xorl ab ## d, x ## d; \
+ addl k+4*(2*(n)+1)(CTX), y ## d; \
+ shrq $32, ab; \
+ roll $1, ab ## d; \
+ xorl y ## d, ab ## d; \
+ shlq $32, ab; \
+ rorl $1, x ## d; \
+ orq x, ab;
+
+#define dec_round_end(ba, x, y, n) \
+ addl y ## d, x ## d; \
+ addl x ## d, y ## d; \
+ addl k+4*(2*(n))(CTX), x ## d; \
+ addl k+4*(2*(n)+1)(CTX), y ## d; \
+ xorl ba ## d, y ## d; \
+ shrq $32, ba; \
+ roll $1, ba ## d; \
+ xorl x ## d, ba ## d; \
+ shlq $32, ba; \
+ rorl $1, y ## d; \
+ orq y, ba;
+
+#define encrypt_round3(ab, cd, n) \
+ g1g2_3(ab, cd, s0, s1, s2, s3, s0, s1, s2, s3, RX, RY); \
+ \
+ enc_round_end(ab ## 0, RX0, RY0, n); \
+ enc_round_end(ab ## 1, RX1, RY1, n); \
+ enc_round_end(ab ## 2, RX2, RY2, n);
+
+#define decrypt_round3(ba, dc, n) \
+ g1g2_3(ba, dc, s1, s2, s3, s0, s3, s0, s1, s2, RY, RX); \
+ \
+ dec_round_end(ba ## 0, RX0, RY0, n); \
+ dec_round_end(ba ## 1, RX1, RY1, n); \
+ dec_round_end(ba ## 2, RX2, RY2, n);
+
+#define encrypt_cycle3(ab, cd, n) \
+ encrypt_round3(ab, cd, n*2); \
+ encrypt_round3(ab, cd, (n*2)+1);
+
+#define decrypt_cycle3(ba, dc, n) \
+ decrypt_round3(ba, dc, (n*2)+1); \
+ decrypt_round3(ba, dc, (n*2));
+
+#define inpack3(in, n, xy, m) \
+ movq 4*(n)(in), xy ## 0; \
+ xorq w+4*m(CTX), xy ## 0; \
+ \
+ movq 4*(4+(n))(in), xy ## 1; \
+ xorq w+4*m(CTX), xy ## 1; \
+ \
+ movq 4*(8+(n))(in), xy ## 2; \
+ xorq w+4*m(CTX), xy ## 2;
+
+#define outunpack3(op, out, n, xy, m) \
+ xorq w+4*m(CTX), xy ## 0; \
+ op ## q xy ## 0, 4*(n)(out); \
+ \
+ xorq w+4*m(CTX), xy ## 1; \
+ op ## q xy ## 1, 4*(4+(n))(out); \
+ \
+ xorq w+4*m(CTX), xy ## 2; \
+ op ## q xy ## 2, 4*(8+(n))(out);
+
+#define inpack_enc3() \
+ inpack3(RIO, 0, RAB, 0); \
+ inpack3(RIO, 2, RCD, 2);
+
+#define outunpack_enc3(op) \
+ outunpack3(op, RIO, 2, RAB, 6); \
+ outunpack3(op, RIO, 0, RCD, 4);
+
+#define inpack_dec3() \
+ inpack3(RIO, 0, RAB, 4); \
+ rorq $32, RAB0; \
+ rorq $32, RAB1; \
+ rorq $32, RAB2; \
+ inpack3(RIO, 2, RCD, 6); \
+ rorq $32, RCD0; \
+ rorq $32, RCD1; \
+ rorq $32, RCD2;
+
+#define outunpack_dec3() \
+ rorq $32, RCD0; \
+ rorq $32, RCD1; \
+ rorq $32, RCD2; \
+ outunpack3(mov, RIO, 0, RCD, 0); \
+ rorq $32, RAB0; \
+ rorq $32, RAB1; \
+ rorq $32, RAB2; \
+ outunpack3(mov, RIO, 2, RAB, 2);
+
+.align 8
+.global __twofish_enc_blk_3way
+.type __twofish_enc_blk_3way,@function;
+
+__twofish_enc_blk_3way:
+ /* input:
+ * %rdi: ctx, CTX
+ * %rsi: dst
+ * %rdx: src, RIO
+ * %rcx: bool, if true: xor output
+ */
+ pushq %r15;
+ pushq %r14;
+ pushq %r13;
+ pushq %r12;
+ pushq %rbp;
+ pushq %rbx;
+
+ pushq %rcx; /* bool xor */
+ pushq %rsi; /* dst */
+
+ inpack_enc3();
+
+ encrypt_cycle3(RAB, RCD, 0);
+ encrypt_cycle3(RAB, RCD, 1);
+ encrypt_cycle3(RAB, RCD, 2);
+ encrypt_cycle3(RAB, RCD, 3);
+ encrypt_cycle3(RAB, RCD, 4);
+ encrypt_cycle3(RAB, RCD, 5);
+ encrypt_cycle3(RAB, RCD, 6);
+ encrypt_cycle3(RAB, RCD, 7);
+
+ popq RIO; /* dst */
+ popq %rbp; /* bool xor */
+
+ testb %bpl, %bpl;
+ jnz __enc_xor3;
+
+ outunpack_enc3(mov);
+
+ popq %rbx;
+ popq %rbp;
+ popq %r12;
+ popq %r13;
+ popq %r14;
+ popq %r15;
+ ret;
+
+__enc_xor3:
+ outunpack_enc3(xor);
+
+ popq %rbx;
+ popq %rbp;
+ popq %r12;
+ popq %r13;
+ popq %r14;
+ popq %r15;
+ ret;
+
+.global twofish_dec_blk_3way
+.type twofish_dec_blk_3way,@function;
+
+twofish_dec_blk_3way:
+ /* input:
+ * %rdi: ctx, CTX
+ * %rsi: dst
+ * %rdx: src, RIO
+ */
+ pushq %r15;
+ pushq %r14;
+ pushq %r13;
+ pushq %r12;
+ pushq %rbp;
+ pushq %rbx;
+
+ pushq %rsi; /* dst */
+
+ inpack_dec3();
+
+ decrypt_cycle3(RAB, RCD, 7);
+ decrypt_cycle3(RAB, RCD, 6);
+ decrypt_cycle3(RAB, RCD, 5);
+ decrypt_cycle3(RAB, RCD, 4);
+ decrypt_cycle3(RAB, RCD, 3);
+ decrypt_cycle3(RAB, RCD, 2);
+ decrypt_cycle3(RAB, RCD, 1);
+ decrypt_cycle3(RAB, RCD, 0);
+
+ popq RIO; /* dst */
+
+ outunpack_dec3();
+
+ popq %rbx;
+ popq %rbp;
+ popq %r12;
+ popq %r13;
+ popq %r14;
+ popq %r15;
+ ret;
+
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 573aa10..7bcf3fc 100644
--- a/arch/x86/crypto/twofish-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
@@ -221,10 +221,9 @@
twofish_enc_blk:
pushq R1
- /* %rdi contains the crypto tfm address */
+ /* %rdi contains the ctx address */
/* %rsi contains the output address */
/* %rdx contains the input address */
- add $crypto_tfm_ctx_offset, %rdi /* set ctx address */
/* ctx address is moved to free one non-rex register
as target for the 8bit high operations */
mov %rdi, %r11
@@ -274,10 +273,9 @@
twofish_dec_blk:
pushq R1
- /* %rdi contains the crypto tfm address */
+ /* %rdi contains the ctx address */
/* %rsi contains the output address */
/* %rdx contains the input address */
- add $crypto_tfm_ctx_offset, %rdi /* set ctx address */
/* ctx address is moved to free one non-rex register
as target for the 8bit high operations */
mov %rdi, %r11
diff --git a/arch/x86/crypto/twofish_glue.c b/arch/x86/crypto/twofish_glue.c
index cefaf8b..dc6b3fb 100644
--- a/arch/x86/crypto/twofish_glue.c
+++ b/arch/x86/crypto/twofish_glue.c
@@ -44,17 +44,21 @@
#include <linux/module.h>
#include <linux/types.h>
-asmlinkage void twofish_enc_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
-asmlinkage void twofish_dec_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
+asmlinkage void twofish_enc_blk(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src);
+EXPORT_SYMBOL_GPL(twofish_enc_blk);
+asmlinkage void twofish_dec_blk(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src);
+EXPORT_SYMBOL_GPL(twofish_dec_blk);
static void twofish_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
{
- twofish_enc_blk(tfm, dst, src);
+ twofish_enc_blk(crypto_tfm_ctx(tfm), dst, src);
}
static void twofish_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
{
- twofish_dec_blk(tfm, dst, src);
+ twofish_dec_blk(crypto_tfm_ctx(tfm), dst, src);
}
static struct crypto_alg alg = {
diff --git a/arch/x86/crypto/twofish_glue_3way.c b/arch/x86/crypto/twofish_glue_3way.c
new file mode 100644
index 0000000..5ede9c4
--- /dev/null
+++ b/arch/x86/crypto/twofish_glue_3way.c
@@ -0,0 +1,472 @@
+/*
+ * Glue Code for 3-way parallel assembler optimized version of Twofish
+ *
+ * Copyright (c) 2011 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ * CBC & ECB parts based on code (crypto/cbc.c,ecb.c) by:
+ * Copyright (c) 2006 Herbert Xu <herbert@gondor.apana.org.au>
+ * CTR part based on code (crypto/ctr.c) by:
+ * (C) Copyright IBM Corp. 2007 - Joy Latten <latten@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <crypto/algapi.h>
+#include <crypto/twofish.h>
+#include <crypto/b128ops.h>
+
+/* regular block cipher functions from twofish_x86_64 module */
+asmlinkage void twofish_enc_blk(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src);
+asmlinkage void twofish_dec_blk(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src);
+
+/* 3-way parallel cipher functions */
+asmlinkage void __twofish_enc_blk_3way(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src, bool xor);
+asmlinkage void twofish_dec_blk_3way(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src);
+
+static inline void twofish_enc_blk_3way(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src)
+{
+ __twofish_enc_blk_3way(ctx, dst, src, false);
+}
+
+static inline void twofish_enc_blk_xor_3way(struct twofish_ctx *ctx, u8 *dst,
+ const u8 *src)
+{
+ __twofish_enc_blk_3way(ctx, dst, src, true);
+}
+
+static int ecb_crypt(struct blkcipher_desc *desc, struct blkcipher_walk *walk,
+ void (*fn)(struct twofish_ctx *, u8 *, const u8 *),
+ void (*fn_3way)(struct twofish_ctx *, u8 *, const u8 *))
+{
+ struct twofish_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = TF_BLOCK_SIZE;
+ unsigned int nbytes;
+ int err;
+
+ err = blkcipher_walk_virt(desc, walk);
+
+ while ((nbytes = walk->nbytes)) {
+ u8 *wsrc = walk->src.virt.addr;
+ u8 *wdst = walk->dst.virt.addr;
+
+ /* Process three block batch */
+ if (nbytes >= bsize * 3) {
+ do {
+ fn_3way(ctx, wdst, wsrc);
+
+ wsrc += bsize * 3;
+ wdst += bsize * 3;
+ nbytes -= bsize * 3;
+ } while (nbytes >= bsize * 3);
+
+ if (nbytes < bsize)
+ goto done;
+ }
+
+ /* Handle leftovers */
+ do {
+ fn(ctx, wdst, wsrc);
+
+ wsrc += bsize;
+ wdst += bsize;
+ nbytes -= bsize;
+ } while (nbytes >= bsize);
+
+done:
+ err = blkcipher_walk_done(desc, walk, nbytes);
+ }
+
+ return err;
+}
+
+static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ecb_crypt(desc, &walk, twofish_enc_blk, twofish_enc_blk_3way);
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ return ecb_crypt(desc, &walk, twofish_dec_blk, twofish_dec_blk_3way);
+}
+
+static struct crypto_alg blk_ecb_alg = {
+ .cra_name = "ecb(twofish)",
+ .cra_driver_name = "ecb-twofish-3way",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = TF_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct twofish_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(blk_ecb_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = TF_MIN_KEY_SIZE,
+ .max_keysize = TF_MAX_KEY_SIZE,
+ .setkey = twofish_setkey,
+ .encrypt = ecb_encrypt,
+ .decrypt = ecb_decrypt,
+ },
+ },
+};
+
+static unsigned int __cbc_encrypt(struct blkcipher_desc *desc,
+ struct blkcipher_walk *walk)
+{
+ struct twofish_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = TF_BLOCK_SIZE;
+ unsigned int nbytes = walk->nbytes;
+ u128 *src = (u128 *)walk->src.virt.addr;
+ u128 *dst = (u128 *)walk->dst.virt.addr;
+ u128 *iv = (u128 *)walk->iv;
+
+ do {
+ u128_xor(dst, src, iv);
+ twofish_enc_blk(ctx, (u8 *)dst, (u8 *)dst);
+ iv = dst;
+
+ src += 1;
+ dst += 1;
+ nbytes -= bsize;
+ } while (nbytes >= bsize);
+
+ u128_xor((u128 *)walk->iv, (u128 *)walk->iv, iv);
+ return nbytes;
+}
+
+static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes = __cbc_encrypt(desc, &walk);
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+static unsigned int __cbc_decrypt(struct blkcipher_desc *desc,
+ struct blkcipher_walk *walk)
+{
+ struct twofish_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = TF_BLOCK_SIZE;
+ unsigned int nbytes = walk->nbytes;
+ u128 *src = (u128 *)walk->src.virt.addr;
+ u128 *dst = (u128 *)walk->dst.virt.addr;
+ u128 ivs[3 - 1];
+ u128 last_iv;
+
+ /* Start of the last block. */
+ src += nbytes / bsize - 1;
+ dst += nbytes / bsize - 1;
+
+ last_iv = *src;
+
+ /* Process three block batch */
+ if (nbytes >= bsize * 3) {
+ do {
+ nbytes -= bsize * (3 - 1);
+ src -= 3 - 1;
+ dst -= 3 - 1;
+
+ ivs[0] = src[0];
+ ivs[1] = src[1];
+
+ twofish_dec_blk_3way(ctx, (u8 *)dst, (u8 *)src);
+
+ u128_xor(dst + 1, dst + 1, ivs + 0);
+ u128_xor(dst + 2, dst + 2, ivs + 1);
+
+ nbytes -= bsize;
+ if (nbytes < bsize)
+ goto done;
+
+ u128_xor(dst, dst, src - 1);
+ src -= 1;
+ dst -= 1;
+ } while (nbytes >= bsize * 3);
+
+ if (nbytes < bsize)
+ goto done;
+ }
+
+ /* Handle leftovers */
+ for (;;) {
+ twofish_dec_blk(ctx, (u8 *)dst, (u8 *)src);
+
+ nbytes -= bsize;
+ if (nbytes < bsize)
+ break;
+
+ u128_xor(dst, dst, src - 1);
+ src -= 1;
+ dst -= 1;
+ }
+
+done:
+ u128_xor(dst, dst, (u128 *)walk->iv);
+ *(u128 *)walk->iv = last_iv;
+
+ return nbytes;
+}
+
+static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes = __cbc_decrypt(desc, &walk);
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+static struct crypto_alg blk_cbc_alg = {
+ .cra_name = "cbc(twofish)",
+ .cra_driver_name = "cbc-twofish-3way",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = TF_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct twofish_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(blk_cbc_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = TF_MIN_KEY_SIZE,
+ .max_keysize = TF_MAX_KEY_SIZE,
+ .ivsize = TF_BLOCK_SIZE,
+ .setkey = twofish_setkey,
+ .encrypt = cbc_encrypt,
+ .decrypt = cbc_decrypt,
+ },
+ },
+};
+
+static inline void u128_to_be128(be128 *dst, const u128 *src)
+{
+ dst->a = cpu_to_be64(src->a);
+ dst->b = cpu_to_be64(src->b);
+}
+
+static inline void be128_to_u128(u128 *dst, const be128 *src)
+{
+ dst->a = be64_to_cpu(src->a);
+ dst->b = be64_to_cpu(src->b);
+}
+
+static inline void u128_inc(u128 *i)
+{
+ i->b++;
+ if (!i->b)
+ i->a++;
+}
+
+static void ctr_crypt_final(struct blkcipher_desc *desc,
+ struct blkcipher_walk *walk)
+{
+ struct twofish_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ u8 *ctrblk = walk->iv;
+ u8 keystream[TF_BLOCK_SIZE];
+ u8 *src = walk->src.virt.addr;
+ u8 *dst = walk->dst.virt.addr;
+ unsigned int nbytes = walk->nbytes;
+
+ twofish_enc_blk(ctx, keystream, ctrblk);
+ crypto_xor(keystream, src, nbytes);
+ memcpy(dst, keystream, nbytes);
+
+ crypto_inc(ctrblk, TF_BLOCK_SIZE);
+}
+
+static unsigned int __ctr_crypt(struct blkcipher_desc *desc,
+ struct blkcipher_walk *walk)
+{
+ struct twofish_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ unsigned int bsize = TF_BLOCK_SIZE;
+ unsigned int nbytes = walk->nbytes;
+ u128 *src = (u128 *)walk->src.virt.addr;
+ u128 *dst = (u128 *)walk->dst.virt.addr;
+ u128 ctrblk;
+ be128 ctrblocks[3];
+
+ be128_to_u128(&ctrblk, (be128 *)walk->iv);
+
+ /* Process three block batch */
+ if (nbytes >= bsize * 3) {
+ do {
+ if (dst != src) {
+ dst[0] = src[0];
+ dst[1] = src[1];
+ dst[2] = src[2];
+ }
+
+ /* create ctrblks for parallel encrypt */
+ u128_to_be128(&ctrblocks[0], &ctrblk);
+ u128_inc(&ctrblk);
+ u128_to_be128(&ctrblocks[1], &ctrblk);
+ u128_inc(&ctrblk);
+ u128_to_be128(&ctrblocks[2], &ctrblk);
+ u128_inc(&ctrblk);
+
+ twofish_enc_blk_xor_3way(ctx, (u8 *)dst,
+ (u8 *)ctrblocks);
+
+ src += 3;
+ dst += 3;
+ nbytes -= bsize * 3;
+ } while (nbytes >= bsize * 3);
+
+ if (nbytes < bsize)
+ goto done;
+ }
+
+ /* Handle leftovers */
+ do {
+ if (dst != src)
+ *dst = *src;
+
+ u128_to_be128(&ctrblocks[0], &ctrblk);
+ u128_inc(&ctrblk);
+
+ twofish_enc_blk(ctx, (u8 *)ctrblocks, (u8 *)ctrblocks);
+ u128_xor(dst, dst, (u128 *)ctrblocks);
+
+ src += 1;
+ dst += 1;
+ nbytes -= bsize;
+ } while (nbytes >= bsize);
+
+done:
+ u128_to_be128((be128 *)walk->iv, &ctrblk);
+ return nbytes;
+}
+
+static int ctr_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+ struct scatterlist *src, unsigned int nbytes)
+{
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt_block(desc, &walk, TF_BLOCK_SIZE);
+
+ while ((nbytes = walk.nbytes) >= TF_BLOCK_SIZE) {
+ nbytes = __ctr_crypt(desc, &walk);
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ if (walk.nbytes) {
+ ctr_crypt_final(desc, &walk);
+ err = blkcipher_walk_done(desc, &walk, 0);
+ }
+
+ return err;
+}
+
+static struct crypto_alg blk_ctr_alg = {
+ .cra_name = "ctr(twofish)",
+ .cra_driver_name = "ctr-twofish-3way",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct twofish_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(blk_ctr_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = TF_MIN_KEY_SIZE,
+ .max_keysize = TF_MAX_KEY_SIZE,
+ .ivsize = TF_BLOCK_SIZE,
+ .setkey = twofish_setkey,
+ .encrypt = ctr_crypt,
+ .decrypt = ctr_crypt,
+ },
+ },
+};
+
+int __init init(void)
+{
+ int err;
+
+ err = crypto_register_alg(&blk_ecb_alg);
+ if (err)
+ goto ecb_err;
+ err = crypto_register_alg(&blk_cbc_alg);
+ if (err)
+ goto cbc_err;
+ err = crypto_register_alg(&blk_ctr_alg);
+ if (err)
+ goto ctr_err;
+
+ return 0;
+
+ctr_err:
+ crypto_unregister_alg(&blk_cbc_alg);
+cbc_err:
+ crypto_unregister_alg(&blk_ecb_alg);
+ecb_err:
+ return err;
+}
+
+void __exit fini(void)
+{
+ crypto_unregister_alg(&blk_ctr_alg);
+ crypto_unregister_alg(&blk_cbc_alg);
+ crypto_unregister_alg(&blk_ecb_alg);
+}
+
+module_init(init);
+module_exit(fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Twofish Cipher Algorithm, 3-way parallel asm optimized");
+MODULE_ALIAS("twofish");
+MODULE_ALIAS("twofish-asm");
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 54edb207..a6253ec 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -850,4 +850,6 @@
.quad sys_syncfs
.quad compat_sys_sendmmsg /* 345 */
.quad sys_setns
+ .quad compat_sys_process_vm_readv
+ .quad compat_sys_process_vm_writev
ia32_syscall_end:
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index 67f87f2..8e41071 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -19,9 +19,15 @@
extern int amd_get_subcaches(int);
extern int amd_set_subcaches(int, int);
+struct amd_l3_cache {
+ unsigned indices;
+ u8 subcaches[4];
+};
+
struct amd_northbridge {
struct pci_dev *misc;
struct pci_dev *link;
+ struct amd_l3_cache l3_cache;
};
struct amd_northbridge_info {
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 34595d5..3925d80 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -100,7 +100,9 @@
#define APIC_TIMER_BASE_CLKIN 0x0
#define APIC_TIMER_BASE_TMBASE 0x1
#define APIC_TIMER_BASE_DIV 0x2
+#define APIC_LVT_TIMER_ONESHOT (0 << 17)
#define APIC_LVT_TIMER_PERIODIC (1 << 17)
+#define APIC_LVT_TIMER_TSCDEADLINE (2 << 17)
#define APIC_LVT_MASKED (1 << 16)
#define APIC_LVT_LEVEL_TRIGGER (1 << 15)
#define APIC_LVT_REMOTE_IRR (1 << 14)
diff --git a/arch/x86/include/asm/archrandom.h b/arch/x86/include/asm/archrandom.h
new file mode 100644
index 0000000..0d9ec77
--- /dev/null
+++ b/arch/x86/include/asm/archrandom.h
@@ -0,0 +1,75 @@
+/*
+ * This file is part of the Linux kernel.
+ *
+ * Copyright (c) 2011, Intel Corporation
+ * Authors: Fenghua Yu <fenghua.yu@intel.com>,
+ * H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef ASM_X86_ARCHRANDOM_H
+#define ASM_X86_ARCHRANDOM_H
+
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative.h>
+#include <asm/nops.h>
+
+#define RDRAND_RETRY_LOOPS 10
+
+#define RDRAND_INT ".byte 0x0f,0xc7,0xf0"
+#ifdef CONFIG_X86_64
+# define RDRAND_LONG ".byte 0x48,0x0f,0xc7,0xf0"
+#else
+# define RDRAND_LONG RDRAND_INT
+#endif
+
+#ifdef CONFIG_ARCH_RANDOM
+
+#define GET_RANDOM(name, type, rdrand, nop) \
+static inline int name(type *v) \
+{ \
+ int ok; \
+ alternative_io("movl $0, %0\n\t" \
+ nop, \
+ "\n1: " rdrand "\n\t" \
+ "jc 2f\n\t" \
+ "decl %0\n\t" \
+ "jnz 1b\n\t" \
+ "2:", \
+ X86_FEATURE_RDRAND, \
+ ASM_OUTPUT2("=r" (ok), "=a" (*v)), \
+ "0" (RDRAND_RETRY_LOOPS)); \
+ return ok; \
+}
+
+#ifdef CONFIG_X86_64
+
+GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP5);
+GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP4);
+
+#else
+
+GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP3);
+GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP3);
+
+#endif /* CONFIG_X86_64 */
+
+#endif /* CONFIG_ARCH_RANDOM */
+
+extern void x86_init_rdrand(struct cpuinfo_x86 *c);
+
+#endif /* ASM_X86_ARCHRANDOM_H */
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index 10572e3..58cb6d4 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -172,18 +172,14 @@
*/
static inline int atomic_add_return(int i, atomic_t *v)
{
- int __i;
#ifdef CONFIG_M386
+ int __i;
unsigned long flags;
if (unlikely(boot_cpu_data.x86 <= 3))
goto no_xadd;
#endif
/* Modern 486+ processor */
- __i = i;
- asm volatile(LOCK_PREFIX "xaddl %0, %1"
- : "+r" (i), "+m" (v->counter)
- : : "memory");
- return i + __i;
+ return i + xadd(&v->counter, i);
#ifdef CONFIG_M386
no_xadd: /* Legacy 386 processor */
diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h
index 017594d..0e1cbfc 100644
--- a/arch/x86/include/asm/atomic64_64.h
+++ b/arch/x86/include/asm/atomic64_64.h
@@ -170,11 +170,7 @@
*/
static inline long atomic64_add_return(long i, atomic64_t *v)
{
- long __i = i;
- asm volatile(LOCK_PREFIX "xaddq %0, %1;"
- : "+r" (i), "+m" (v->counter)
- : : "memory");
- return i + __i;
+ return i + xadd(&v->counter, i);
}
static inline long atomic64_sub_return(long i, atomic64_t *v)
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index a460fa0..5d3acdf 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -1,5 +1,210 @@
+#ifndef ASM_X86_CMPXCHG_H
+#define ASM_X86_CMPXCHG_H
+
+#include <linux/compiler.h>
+#include <asm/alternative.h> /* Provides LOCK_PREFIX */
+
+/*
+ * Non-existant functions to indicate usage errors at link time
+ * (or compile-time if the compiler implements __compiletime_error().
+ */
+extern void __xchg_wrong_size(void)
+ __compiletime_error("Bad argument size for xchg");
+extern void __cmpxchg_wrong_size(void)
+ __compiletime_error("Bad argument size for cmpxchg");
+extern void __xadd_wrong_size(void)
+ __compiletime_error("Bad argument size for xadd");
+
+/*
+ * Constants for operation sizes. On 32-bit, the 64-bit size it set to
+ * -1 because sizeof will never return -1, thereby making those switch
+ * case statements guaranteeed dead code which the compiler will
+ * eliminate, and allowing the "missing symbol in the default case" to
+ * indicate a usage error.
+ */
+#define __X86_CASE_B 1
+#define __X86_CASE_W 2
+#define __X86_CASE_L 4
+#ifdef CONFIG_64BIT
+#define __X86_CASE_Q 8
+#else
+#define __X86_CASE_Q -1 /* sizeof will never return -1 */
+#endif
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway.
+ * Since this is generally used to protect other memory information, we
+ * use "asm volatile" and "memory" clobbers to prevent gcc from moving
+ * information around.
+ */
+#define __xchg(x, ptr, size) \
+({ \
+ __typeof(*(ptr)) __x = (x); \
+ switch (size) { \
+ case __X86_CASE_B: \
+ { \
+ volatile u8 *__ptr = (volatile u8 *)(ptr); \
+ asm volatile("xchgb %0,%1" \
+ : "=q" (__x), "+m" (*__ptr) \
+ : "0" (__x) \
+ : "memory"); \
+ break; \
+ } \
+ case __X86_CASE_W: \
+ { \
+ volatile u16 *__ptr = (volatile u16 *)(ptr); \
+ asm volatile("xchgw %0,%1" \
+ : "=r" (__x), "+m" (*__ptr) \
+ : "0" (__x) \
+ : "memory"); \
+ break; \
+ } \
+ case __X86_CASE_L: \
+ { \
+ volatile u32 *__ptr = (volatile u32 *)(ptr); \
+ asm volatile("xchgl %0,%1" \
+ : "=r" (__x), "+m" (*__ptr) \
+ : "0" (__x) \
+ : "memory"); \
+ break; \
+ } \
+ case __X86_CASE_Q: \
+ { \
+ volatile u64 *__ptr = (volatile u64 *)(ptr); \
+ asm volatile("xchgq %0,%1" \
+ : "=r" (__x), "+m" (*__ptr) \
+ : "0" (__x) \
+ : "memory"); \
+ break; \
+ } \
+ default: \
+ __xchg_wrong_size(); \
+ } \
+ __x; \
+})
+
+#define xchg(ptr, v) \
+ __xchg((v), (ptr), sizeof(*ptr))
+
+/*
+ * Atomic compare and exchange. Compare OLD with MEM, if identical,
+ * store NEW in MEM. Return the initial value in MEM. Success is
+ * indicated by comparing RETURN with OLD.
+ */
+#define __raw_cmpxchg(ptr, old, new, size, lock) \
+({ \
+ __typeof__(*(ptr)) __ret; \
+ __typeof__(*(ptr)) __old = (old); \
+ __typeof__(*(ptr)) __new = (new); \
+ switch (size) { \
+ case __X86_CASE_B: \
+ { \
+ volatile u8 *__ptr = (volatile u8 *)(ptr); \
+ asm volatile(lock "cmpxchgb %2,%1" \
+ : "=a" (__ret), "+m" (*__ptr) \
+ : "q" (__new), "0" (__old) \
+ : "memory"); \
+ break; \
+ } \
+ case __X86_CASE_W: \
+ { \
+ volatile u16 *__ptr = (volatile u16 *)(ptr); \
+ asm volatile(lock "cmpxchgw %2,%1" \
+ : "=a" (__ret), "+m" (*__ptr) \
+ : "r" (__new), "0" (__old) \
+ : "memory"); \
+ break; \
+ } \
+ case __X86_CASE_L: \
+ { \
+ volatile u32 *__ptr = (volatile u32 *)(ptr); \
+ asm volatile(lock "cmpxchgl %2,%1" \
+ : "=a" (__ret), "+m" (*__ptr) \
+ : "r" (__new), "0" (__old) \
+ : "memory"); \
+ break; \
+ } \
+ case __X86_CASE_Q: \
+ { \
+ volatile u64 *__ptr = (volatile u64 *)(ptr); \
+ asm volatile(lock "cmpxchgq %2,%1" \
+ : "=a" (__ret), "+m" (*__ptr) \
+ : "r" (__new), "0" (__old) \
+ : "memory"); \
+ break; \
+ } \
+ default: \
+ __cmpxchg_wrong_size(); \
+ } \
+ __ret; \
+})
+
+#define __cmpxchg(ptr, old, new, size) \
+ __raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX)
+
+#define __sync_cmpxchg(ptr, old, new, size) \
+ __raw_cmpxchg((ptr), (old), (new), (size), "lock; ")
+
+#define __cmpxchg_local(ptr, old, new, size) \
+ __raw_cmpxchg((ptr), (old), (new), (size), "")
+
#ifdef CONFIG_X86_32
# include "cmpxchg_32.h"
#else
# include "cmpxchg_64.h"
#endif
+
+#ifdef __HAVE_ARCH_CMPXCHG
+#define cmpxchg(ptr, old, new) \
+ __cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define sync_cmpxchg(ptr, old, new) \
+ __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define cmpxchg_local(ptr, old, new) \
+ __cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
+#endif
+
+#define __xadd(ptr, inc, lock) \
+ ({ \
+ __typeof__ (*(ptr)) __ret = (inc); \
+ switch (sizeof(*(ptr))) { \
+ case __X86_CASE_B: \
+ asm volatile (lock "xaddb %b0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ case __X86_CASE_W: \
+ asm volatile (lock "xaddw %w0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ case __X86_CASE_L: \
+ asm volatile (lock "xaddl %0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ case __X86_CASE_Q: \
+ asm volatile (lock "xaddq %q0, %1\n" \
+ : "+r" (__ret), "+m" (*(ptr)) \
+ : : "memory", "cc"); \
+ break; \
+ default: \
+ __xadd_wrong_size(); \
+ } \
+ __ret; \
+ })
+
+/*
+ * xadd() adds "inc" to "*ptr" and atomically returns the previous
+ * value of "*ptr".
+ *
+ * xadd() is locked when multiple CPUs are online
+ * xadd_sync() is always locked
+ * xadd_local() is never locked
+ */
+#define xadd(ptr, inc) __xadd((ptr), (inc), LOCK_PREFIX)
+#define xadd_sync(ptr, inc) __xadd((ptr), (inc), "lock; ")
+#define xadd_local(ptr, inc) __xadd((ptr), (inc), "")
+
+#endif /* ASM_X86_CMPXCHG_H */
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index 3deb725..fbebb07 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -1,61 +1,11 @@
#ifndef _ASM_X86_CMPXCHG_32_H
#define _ASM_X86_CMPXCHG_32_H
-#include <linux/bitops.h> /* for LOCK_PREFIX */
-
/*
* Note: if you use set64_bit(), __cmpxchg64(), or their variants, you
* you need to test for the feature in boot_cpu_data.
*/
-extern void __xchg_wrong_size(void);
-
-/*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway.
- * Since this is generally used to protect other memory information, we
- * use "asm volatile" and "memory" clobbers to prevent gcc from moving
- * information around.
- */
-#define __xchg(x, ptr, size) \
-({ \
- __typeof(*(ptr)) __x = (x); \
- switch (size) { \
- case 1: \
- { \
- volatile u8 *__ptr = (volatile u8 *)(ptr); \
- asm volatile("xchgb %0,%1" \
- : "=q" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case 2: \
- { \
- volatile u16 *__ptr = (volatile u16 *)(ptr); \
- asm volatile("xchgw %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case 4: \
- { \
- volatile u32 *__ptr = (volatile u32 *)(ptr); \
- asm volatile("xchgl %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- default: \
- __xchg_wrong_size(); \
- } \
- __x; \
-})
-
-#define xchg(ptr, v) \
- __xchg((v), (ptr), sizeof(*ptr))
-
/*
* CMPXCHG8B only writes to the target if we had the previous
* value in registers, otherwise it acts as a read and gives us the
@@ -84,72 +34,8 @@
: "memory");
}
-extern void __cmpxchg_wrong_size(void);
-
-/*
- * Atomic compare and exchange. Compare OLD with MEM, if identical,
- * store NEW in MEM. Return the initial value in MEM. Success is
- * indicated by comparing RETURN with OLD.
- */
-#define __raw_cmpxchg(ptr, old, new, size, lock) \
-({ \
- __typeof__(*(ptr)) __ret; \
- __typeof__(*(ptr)) __old = (old); \
- __typeof__(*(ptr)) __new = (new); \
- switch (size) { \
- case 1: \
- { \
- volatile u8 *__ptr = (volatile u8 *)(ptr); \
- asm volatile(lock "cmpxchgb %2,%1" \
- : "=a" (__ret), "+m" (*__ptr) \
- : "q" (__new), "0" (__old) \
- : "memory"); \
- break; \
- } \
- case 2: \
- { \
- volatile u16 *__ptr = (volatile u16 *)(ptr); \
- asm volatile(lock "cmpxchgw %2,%1" \
- : "=a" (__ret), "+m" (*__ptr) \
- : "r" (__new), "0" (__old) \
- : "memory"); \
- break; \
- } \
- case 4: \
- { \
- volatile u32 *__ptr = (volatile u32 *)(ptr); \
- asm volatile(lock "cmpxchgl %2,%1" \
- : "=a" (__ret), "+m" (*__ptr) \
- : "r" (__new), "0" (__old) \
- : "memory"); \
- break; \
- } \
- default: \
- __cmpxchg_wrong_size(); \
- } \
- __ret; \
-})
-
-#define __cmpxchg(ptr, old, new, size) \
- __raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX)
-
-#define __sync_cmpxchg(ptr, old, new, size) \
- __raw_cmpxchg((ptr), (old), (new), (size), "lock; ")
-
-#define __cmpxchg_local(ptr, old, new, size) \
- __raw_cmpxchg((ptr), (old), (new), (size), "")
-
#ifdef CONFIG_X86_CMPXCHG
#define __HAVE_ARCH_CMPXCHG 1
-
-#define cmpxchg(ptr, old, new) \
- __cmpxchg((ptr), (old), (new), sizeof(*ptr))
-
-#define sync_cmpxchg(ptr, old, new) \
- __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
-
-#define cmpxchg_local(ptr, old, new) \
- __cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
#endif
#ifdef CONFIG_X86_CMPXCHG64
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
index 7cf5c0a..285da02 100644
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -1,144 +1,13 @@
#ifndef _ASM_X86_CMPXCHG_64_H
#define _ASM_X86_CMPXCHG_64_H
-#include <asm/alternative.h> /* Provides LOCK_PREFIX */
-
static inline void set_64bit(volatile u64 *ptr, u64 val)
{
*ptr = val;
}
-extern void __xchg_wrong_size(void);
-extern void __cmpxchg_wrong_size(void);
-
-/*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway.
- * Since this is generally used to protect other memory information, we
- * use "asm volatile" and "memory" clobbers to prevent gcc from moving
- * information around.
- */
-#define __xchg(x, ptr, size) \
-({ \
- __typeof(*(ptr)) __x = (x); \
- switch (size) { \
- case 1: \
- { \
- volatile u8 *__ptr = (volatile u8 *)(ptr); \
- asm volatile("xchgb %0,%1" \
- : "=q" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case 2: \
- { \
- volatile u16 *__ptr = (volatile u16 *)(ptr); \
- asm volatile("xchgw %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case 4: \
- { \
- volatile u32 *__ptr = (volatile u32 *)(ptr); \
- asm volatile("xchgl %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- case 8: \
- { \
- volatile u64 *__ptr = (volatile u64 *)(ptr); \
- asm volatile("xchgq %0,%1" \
- : "=r" (__x), "+m" (*__ptr) \
- : "0" (__x) \
- : "memory"); \
- break; \
- } \
- default: \
- __xchg_wrong_size(); \
- } \
- __x; \
-})
-
-#define xchg(ptr, v) \
- __xchg((v), (ptr), sizeof(*ptr))
-
#define __HAVE_ARCH_CMPXCHG 1
-/*
- * Atomic compare and exchange. Compare OLD with MEM, if identical,
- * store NEW in MEM. Return the initial value in MEM. Success is
- * indicated by comparing RETURN with OLD.
- */
-#define __raw_cmpxchg(ptr, old, new, size, lock) \
-({ \
- __typeof__(*(ptr)) __ret; \
- __typeof__(*(ptr)) __old = (old); \
- __typeof__(*(ptr)) __new = (new); \
- switch (size) { \
- case 1: \
- { \
- volatile u8 *__ptr = (volatile u8 *)(ptr); \
- asm volatile(lock "cmpxchgb %2,%1" \
- : "=a" (__ret), "+m" (*__ptr) \
- : "q" (__new), "0" (__old) \
- : "memory"); \
- break; \
- } \
- case 2: \
- { \
- volatile u16 *__ptr = (volatile u16 *)(ptr); \
- asm volatile(lock "cmpxchgw %2,%1" \
- : "=a" (__ret), "+m" (*__ptr) \
- : "r" (__new), "0" (__old) \
- : "memory"); \
- break; \
- } \
- case 4: \
- { \
- volatile u32 *__ptr = (volatile u32 *)(ptr); \
- asm volatile(lock "cmpxchgl %2,%1" \
- : "=a" (__ret), "+m" (*__ptr) \
- : "r" (__new), "0" (__old) \
- : "memory"); \
- break; \
- } \
- case 8: \
- { \
- volatile u64 *__ptr = (volatile u64 *)(ptr); \
- asm volatile(lock "cmpxchgq %2,%1" \
- : "=a" (__ret), "+m" (*__ptr) \
- : "r" (__new), "0" (__old) \
- : "memory"); \
- break; \
- } \
- default: \
- __cmpxchg_wrong_size(); \
- } \
- __ret; \
-})
-
-#define __cmpxchg(ptr, old, new, size) \
- __raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX)
-
-#define __sync_cmpxchg(ptr, old, new, size) \
- __raw_cmpxchg((ptr), (old), (new), (size), "lock; ")
-
-#define __cmpxchg_local(ptr, old, new, size) \
- __raw_cmpxchg((ptr), (old), (new), (size), "")
-
-#define cmpxchg(ptr, old, new) \
- __cmpxchg((ptr), (old), (new), sizeof(*ptr))
-
-#define sync_cmpxchg(ptr, old, new) \
- __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
-
-#define cmpxchg_local(ptr, old, new) \
- __cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
-
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 1d9cd27..30d737e 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -108,7 +108,8 @@
compat_fsid_t f_fsid;
int f_namelen; /* SunOS ignores this field. */
int f_frsize;
- int f_spare[5];
+ int f_flags;
+ int f_spare[4];
};
#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 88b23a4..f3444f7 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -114,12 +114,14 @@
#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
#define X86_FEATURE_PDCM (4*32+15) /* Performance Capabilities */
+#define X86_FEATURE_PCID (4*32+17) /* Process Context Identifiers */
#define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */
#define X86_FEATURE_XMM4_1 (4*32+19) /* "sse4_1" SSE-4.1 */
#define X86_FEATURE_XMM4_2 (4*32+20) /* "sse4_2" SSE-4.2 */
#define X86_FEATURE_X2APIC (4*32+21) /* x2APIC */
#define X86_FEATURE_MOVBE (4*32+22) /* MOVBE instruction */
#define X86_FEATURE_POPCNT (4*32+23) /* POPCNT instruction */
+#define X86_FEATURE_TSC_DEADLINE_TIMER (4*32+24) /* Tsc deadline timer */
#define X86_FEATURE_AES (4*32+25) /* AES instructions */
#define X86_FEATURE_XSAVE (4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
#define X86_FEATURE_OSXSAVE (4*32+27) /* "" XSAVE enabled in the OS */
@@ -257,7 +259,9 @@
#define cpu_has_xmm boot_cpu_has(X86_FEATURE_XMM)
#define cpu_has_xmm2 boot_cpu_has(X86_FEATURE_XMM2)
#define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3)
+#define cpu_has_ssse3 boot_cpu_has(X86_FEATURE_SSSE3)
#define cpu_has_aes boot_cpu_has(X86_FEATURE_AES)
+#define cpu_has_avx boot_cpu_has(X86_FEATURE_AVX)
#define cpu_has_ht boot_cpu_has(X86_FEATURE_HT)
#define cpu_has_mp boot_cpu_has(X86_FEATURE_MP)
#define cpu_has_nx boot_cpu_has(X86_FEATURE_NX)
@@ -285,6 +289,7 @@
#define cpu_has_xmm4_2 boot_cpu_has(X86_FEATURE_XMM4_2)
#define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC)
#define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE)
+#define cpu_has_osxsave boot_cpu_has(X86_FEATURE_OSXSAVE)
#define cpu_has_hypervisor boot_cpu_has(X86_FEATURE_HYPERVISOR)
#define cpu_has_pclmulqdq boot_cpu_has(X86_FEATURE_PCLMULQDQ)
#define cpu_has_perfctr_core boot_cpu_has(X86_FEATURE_PERFCTR_CORE)
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index f2ad216..5f962df 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -4,6 +4,7 @@
/*
* ELF register definitions..
*/
+#include <linux/thread_info.h>
#include <asm/ptrace.h>
#include <asm/user.h>
@@ -320,4 +321,34 @@
extern unsigned long arch_randomize_brk(struct mm_struct *mm);
#define arch_randomize_brk arch_randomize_brk
+/*
+ * True on X86_32 or when emulating IA32 on X86_64
+ */
+static inline int mmap_is_ia32(void)
+{
+#ifdef CONFIG_X86_32
+ return 1;
+#endif
+#ifdef CONFIG_IA32_EMULATION
+ if (test_thread_flag(TIF_IA32))
+ return 1;
+#endif
+ return 0;
+}
+
+/* The first two values are special, do not change. See align_addr() */
+enum align_flags {
+ ALIGN_VA_32 = BIT(0),
+ ALIGN_VA_64 = BIT(1),
+ ALIGN_VDSO = BIT(2),
+ ALIGN_TOPDOWN = BIT(3),
+};
+
+struct va_alignment {
+ int flags;
+ unsigned long mask;
+} ____cacheline_aligned;
+
+extern struct va_alignment va_align;
+extern unsigned long align_addr(unsigned long, struct file *, enum align_flags);
#endif /* _ASM_X86_ELF_H */
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 29f6679..4420993 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -1,6 +1,8 @@
#ifndef _ASM_X86_INTEL_SCU_IPC_H_
#define _ASM_X86_INTEL_SCU_IPC_H_
+#include <linux/notifier.h>
+
#define IPCMSG_VRTC 0xFA /* Set vRTC device */
/* Command id associated with message IPCMSG_VRTC */
@@ -44,4 +46,24 @@
/* Update FW version */
int intel_scu_ipc_fw_update(u8 *buffer, u32 length);
+extern struct blocking_notifier_head intel_scu_notifier;
+
+static inline void intel_scu_notifier_add(struct notifier_block *nb)
+{
+ blocking_notifier_chain_register(&intel_scu_notifier, nb);
+}
+
+static inline void intel_scu_notifier_remove(struct notifier_block *nb)
+{
+ blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
+}
+
+static inline int intel_scu_notifier_post(unsigned long v, void *p)
+{
+ return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
+}
+
+#define SCU_AVAILABLE 1
+#define SCU_DOWN 2
+
#endif
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index 6040d11..a026507 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -262,7 +262,7 @@
struct operand dst;
bool has_seg_override;
u8 seg_override;
- unsigned int d;
+ u64 d;
int (*execute)(struct x86_emulate_ctxt *ctxt);
int (*check_perm)(struct x86_emulate_ctxt *ctxt);
/* modrm */
@@ -275,6 +275,8 @@
unsigned long _eip;
/* Fields above regs are cleared together. */
unsigned long regs[NR_VCPU_REGS];
+ struct operand memop;
+ struct operand *memopp;
struct fetch_cache fetch;
struct read_cache io_read;
struct read_cache mem_read;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index dd51c83..b4973f4 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -26,7 +26,8 @@
#include <asm/mtrr.h>
#include <asm/msr-index.h>
-#define KVM_MAX_VCPUS 64
+#define KVM_MAX_VCPUS 254
+#define KVM_SOFT_MAX_VCPUS 64
#define KVM_MEMORY_SLOTS 32
/* memory slots that does not exposed to userspace */
#define KVM_PRIVATE_MEM_SLOTS 4
@@ -264,6 +265,7 @@
void (*new_cr3)(struct kvm_vcpu *vcpu);
void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long root);
unsigned long (*get_cr3)(struct kvm_vcpu *vcpu);
+ u64 (*get_pdptr)(struct kvm_vcpu *vcpu, int index);
int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err,
bool prefault);
void (*inject_page_fault)(struct kvm_vcpu *vcpu,
@@ -411,8 +413,9 @@
u32 tsc_catchup_mult;
s8 tsc_catchup_shift;
- bool nmi_pending;
- bool nmi_injected;
+ atomic_t nmi_queued; /* unprocessed asynchronous NMIs */
+ unsigned nmi_pending; /* NMI queued after currently running handler */
+ bool nmi_injected; /* Trying to inject an NMI this entry */
struct mtrr_state_type mtrr_state;
u32 pat;
@@ -628,14 +631,13 @@
void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset);
u64 (*compute_tsc_offset)(struct kvm_vcpu *vcpu, u64 target_tsc);
+ u64 (*read_l1_tsc)(struct kvm_vcpu *vcpu);
void (*get_exit_info)(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2);
int (*check_intercept)(struct kvm_vcpu *vcpu,
struct x86_instruction_info *info,
enum x86_intercept_stage stage);
-
- const struct trace_print_flags *exit_reasons_str;
};
struct kvm_arch_async_pf {
@@ -672,6 +674,8 @@
extern bool tdp_enabled;
+u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu);
+
/* control of guest tsc rate supported? */
extern bool kvm_has_tsc_control;
/* minimum supported tsc_khz for guests */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index d52609a..a6962d9 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -229,6 +229,8 @@
#define MSR_IA32_APICBASE_ENABLE (1<<11)
#define MSR_IA32_APICBASE_BASE (0xfffff<<12)
+#define MSR_IA32_TSCDEADLINE 0x000006e0
+
#define MSR_IA32_UCODE_WRITE 0x00000079
#define MSR_IA32_UCODE_REV 0x0000008b
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 7045267..e381978 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -99,10 +99,10 @@
int reg, int len, u32 val);
};
-extern struct pci_raw_ops *raw_pci_ops;
-extern struct pci_raw_ops *raw_pci_ext_ops;
+extern const struct pci_raw_ops *raw_pci_ops;
+extern const struct pci_raw_ops *raw_pci_ext_ops;
-extern struct pci_raw_ops pci_direct_conf1;
+extern const struct pci_raw_ops pci_direct_conf1;
extern bool port_cf9_safe;
/* arch_initcall level */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 0d1171c..b650435 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -111,6 +111,7 @@
/* Index into per_cpu list: */
u16 cpu_index;
#endif
+ u32 microcode;
} __attribute__((__aligned__(SMP_CACHE_BYTES)));
#define X86_VENDOR_INTEL 0
@@ -179,7 +180,8 @@
"=b" (*ebx),
"=c" (*ecx),
"=d" (*edx)
- : "0" (*eax), "2" (*ecx));
+ : "0" (*eax), "2" (*ecx)
+ : "memory");
}
static inline void load_cr3(pgd_t *pgdir)
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index df4cd32..2dbe4a7 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -204,13 +204,7 @@
*/
static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
{
- long tmp = delta;
-
- asm volatile(LOCK_PREFIX "xadd %0,%1"
- : "+r" (tmp), "+m" (sem->count)
- : : "memory");
-
- return tmp + delta;
+ return delta + xadd(&sem->count, delta);
}
#endif /* __KERNEL__ */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index ee67edf..972c260 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -49,109 +49,49 @@
* issues and should be optimal for the uncontended case. Note the tail must be
* in the high part, because a wide xadd increment of the low part would carry
* up and contaminate the high part.
- *
- * With fewer than 2^8 possible CPUs, we can use x86's partial registers to
- * save some instructions and make the code more elegant. There really isn't
- * much between them in performance though, especially as locks are out of line.
*/
-#if (NR_CPUS < 256)
-#define TICKET_SHIFT 8
-
static __always_inline void __ticket_spin_lock(arch_spinlock_t *lock)
{
- short inc = 0x0100;
+ register struct __raw_tickets inc = { .tail = 1 };
- asm volatile (
- LOCK_PREFIX "xaddw %w0, %1\n"
- "1:\t"
- "cmpb %h0, %b0\n\t"
- "je 2f\n\t"
- "rep ; nop\n\t"
- "movb %1, %b0\n\t"
- /* don't need lfence here, because loads are in-order */
- "jmp 1b\n"
- "2:"
- : "+Q" (inc), "+m" (lock->slock)
- :
- : "memory", "cc");
+ inc = xadd(&lock->tickets, inc);
+
+ for (;;) {
+ if (inc.head == inc.tail)
+ break;
+ cpu_relax();
+ inc.head = ACCESS_ONCE(lock->tickets.head);
+ }
+ barrier(); /* make sure nothing creeps before the lock is taken */
}
static __always_inline int __ticket_spin_trylock(arch_spinlock_t *lock)
{
- int tmp, new;
+ arch_spinlock_t old, new;
- asm volatile("movzwl %2, %0\n\t"
- "cmpb %h0,%b0\n\t"
- "leal 0x100(%" REG_PTR_MODE "0), %1\n\t"
- "jne 1f\n\t"
- LOCK_PREFIX "cmpxchgw %w1,%2\n\t"
- "1:"
- "sete %b1\n\t"
- "movzbl %b1,%0\n\t"
- : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
- :
- : "memory", "cc");
+ old.tickets = ACCESS_ONCE(lock->tickets);
+ if (old.tickets.head != old.tickets.tail)
+ return 0;
- return tmp;
+ new.head_tail = old.head_tail + (1 << TICKET_SHIFT);
+
+ /* cmpxchg is a full barrier, so nothing can move before it */
+ return cmpxchg(&lock->head_tail, old.head_tail, new.head_tail) == old.head_tail;
}
+#if (NR_CPUS < 256)
static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
{
asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
- : "+m" (lock->slock)
+ : "+m" (lock->head_tail)
:
: "memory", "cc");
}
#else
-#define TICKET_SHIFT 16
-
-static __always_inline void __ticket_spin_lock(arch_spinlock_t *lock)
-{
- int inc = 0x00010000;
- int tmp;
-
- asm volatile(LOCK_PREFIX "xaddl %0, %1\n"
- "movzwl %w0, %2\n\t"
- "shrl $16, %0\n\t"
- "1:\t"
- "cmpl %0, %2\n\t"
- "je 2f\n\t"
- "rep ; nop\n\t"
- "movzwl %1, %2\n\t"
- /* don't need lfence here, because loads are in-order */
- "jmp 1b\n"
- "2:"
- : "+r" (inc), "+m" (lock->slock), "=&r" (tmp)
- :
- : "memory", "cc");
-}
-
-static __always_inline int __ticket_spin_trylock(arch_spinlock_t *lock)
-{
- int tmp;
- int new;
-
- asm volatile("movl %2,%0\n\t"
- "movl %0,%1\n\t"
- "roll $16, %0\n\t"
- "cmpl %0,%1\n\t"
- "leal 0x00010000(%" REG_PTR_MODE "0), %1\n\t"
- "jne 1f\n\t"
- LOCK_PREFIX "cmpxchgl %1,%2\n\t"
- "1:"
- "sete %b1\n\t"
- "movzbl %b1,%0\n\t"
- : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
- :
- : "memory", "cc");
-
- return tmp;
-}
-
static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
{
asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
- : "+m" (lock->slock)
+ : "+m" (lock->head_tail)
:
: "memory", "cc");
}
@@ -159,16 +99,16 @@
static inline int __ticket_spin_is_locked(arch_spinlock_t *lock)
{
- int tmp = ACCESS_ONCE(lock->slock);
+ struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets);
- return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1 << TICKET_SHIFT) - 1));
+ return !!(tmp.tail ^ tmp.head);
}
static inline int __ticket_spin_is_contended(arch_spinlock_t *lock)
{
- int tmp = ACCESS_ONCE(lock->slock);
+ struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets);
- return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
+ return ((tmp.tail - tmp.head) & TICKET_MASK) > 1;
}
#ifndef CONFIG_PARAVIRT_SPINLOCKS
diff --git a/arch/x86/include/asm/spinlock_types.h b/arch/x86/include/asm/spinlock_types.h
index 7c7a486..8ebd5df 100644
--- a/arch/x86/include/asm/spinlock_types.h
+++ b/arch/x86/include/asm/spinlock_types.h
@@ -5,11 +5,29 @@
# error "please don't include this file directly"
#endif
+#include <linux/types.h>
+
+#if (CONFIG_NR_CPUS < 256)
+typedef u8 __ticket_t;
+typedef u16 __ticketpair_t;
+#else
+typedef u16 __ticket_t;
+typedef u32 __ticketpair_t;
+#endif
+
+#define TICKET_SHIFT (sizeof(__ticket_t) * 8)
+#define TICKET_MASK ((__ticket_t)((1 << TICKET_SHIFT) - 1))
+
typedef struct arch_spinlock {
- unsigned int slock;
+ union {
+ __ticketpair_t head_tail;
+ struct __raw_tickets {
+ __ticket_t head, tail;
+ } tickets;
+ };
} arch_spinlock_t;
-#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
+#define __ARCH_SPIN_LOCK_UNLOCKED { { 0 } }
#include <asm/rwlock.h>
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 593485b3..599c77d 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -352,10 +352,12 @@
#define __NR_syncfs 344
#define __NR_sendmmsg 345
#define __NR_setns 346
+#define __NR_process_vm_readv 347
+#define __NR_process_vm_writev 348
#ifdef __KERNEL__
-#define NR_syscalls 347
+#define NR_syscalls 349
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 0a6ba33..0431f19 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -682,6 +682,10 @@
__SYSCALL(__NR_setns, sys_setns)
#define __NR_getcpu 309
__SYSCALL(__NR_getcpu, sys_getcpu)
+#define __NR_process_vm_readv 310
+__SYSCALL(__NR_process_vm_readv, sys_process_vm_readv)
+#define __NR_process_vm_writev 311
+__SYSCALL(__NR_process_vm_writev, sys_process_vm_writev)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 37d3698..8e862aa 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -55,6 +55,7 @@
#define UV_BAU_TUNABLES_DIR "sgi_uv"
#define UV_BAU_TUNABLES_FILE "bau_tunables"
#define WHITESPACE " \t\n"
+#define uv_mmask ((1UL << uv_hub_info->m_val) - 1)
#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
#define cpubit_isset(cpu, bau_local_cpumask) \
test_bit((cpu), (bau_local_cpumask).bits)
@@ -656,11 +657,7 @@
*/
static inline int atom_asr(short i, struct atomic_short *v)
{
- short __i = i;
- asm volatile(LOCK_PREFIX "xaddw %0, %1"
- : "+r" (i), "+m" (v->counter)
- : : "memory");
- return i + __i;
+ return i + xadd(&v->counter, i);
}
/*
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index f26544a..54a13aae 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -46,6 +46,13 @@
* PNODE - the low N bits of the GNODE. The PNODE is the most useful variant
* of the nasid for socket usage.
*
+ * GPA - (global physical address) a socket physical address converted
+ * so that it can be used by the GRU as a global address. Socket
+ * physical addresses 1) need additional NASID (node) bits added
+ * to the high end of the address, and 2) unaliased if the
+ * partition does not have a physical address 0. In addition, on
+ * UV2 rev 1, GPAs need the gnode left shifted to bits 39 or 40.
+ *
*
* NumaLink Global Physical Address Format:
* +--------------------------------+---------------------+
@@ -141,6 +148,8 @@
unsigned int gnode_extra;
unsigned char hub_revision;
unsigned char apic_pnode_shift;
+ unsigned char m_shift;
+ unsigned char n_lshift;
unsigned long gnode_upper;
unsigned long lowmem_remap_top;
unsigned long lowmem_remap_base;
@@ -177,6 +186,16 @@
return uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE;
}
+static inline int is_uv2_1_hub(void)
+{
+ return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE;
+}
+
+static inline int is_uv2_2_hub(void)
+{
+ return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE + 1;
+}
+
union uvh_apicid {
unsigned long v;
struct uvh_apicid_s {
@@ -276,7 +295,10 @@
{
if (paddr < uv_hub_info->lowmem_remap_top)
paddr |= uv_hub_info->lowmem_remap_base;
- return paddr | uv_hub_info->gnode_upper;
+ paddr |= uv_hub_info->gnode_upper;
+ paddr = ((paddr << uv_hub_info->m_shift) >> uv_hub_info->m_shift) |
+ ((paddr >> uv_hub_info->m_val) << uv_hub_info->n_lshift);
+ return paddr;
}
@@ -300,16 +322,19 @@
unsigned long remap_base = uv_hub_info->lowmem_remap_base;
unsigned long remap_top = uv_hub_info->lowmem_remap_top;
+ gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) |
+ ((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val);
+ gpa = gpa & uv_hub_info->gpa_mask;
if (paddr >= remap_base && paddr < remap_base + remap_top)
paddr -= remap_base;
return paddr;
}
-/* gnode -> pnode */
+/* gpa -> pnode */
static inline unsigned long uv_gpa_to_gnode(unsigned long gpa)
{
- return gpa >> uv_hub_info->m_val;
+ return gpa >> uv_hub_info->n_lshift;
}
/* gpa -> pnode */
@@ -320,6 +345,12 @@
return uv_gpa_to_gnode(gpa) & n_mask;
}
+/* gpa -> node offset*/
+static inline unsigned long uv_gpa_to_offset(unsigned long gpa)
+{
+ return (gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift;
+}
+
/* pnode, offset --> socket virtual */
static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
{
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 2caf290..31f180c2 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -350,6 +350,18 @@
#define DEBUG_REG_ACCESS_REG(eq) (((eq) >> 8) & 0xf) /* 11:8, general purpose reg. */
+/*
+ * Exit Qualifications for APIC-Access
+ */
+#define APIC_ACCESS_OFFSET 0xfff /* 11:0, offset within the APIC page */
+#define APIC_ACCESS_TYPE 0xf000 /* 15:12, access type */
+#define TYPE_LINEAR_APIC_INST_READ (0 << 12)
+#define TYPE_LINEAR_APIC_INST_WRITE (1 << 12)
+#define TYPE_LINEAR_APIC_INST_FETCH (2 << 12)
+#define TYPE_LINEAR_APIC_EVENT (3 << 12)
+#define TYPE_PHYSICAL_APIC_EVENT (10 << 12)
+#define TYPE_PHYSICAL_APIC_INST (15 << 12)
+
/* segment AR */
#define SEGMENT_AR_L_MASK (1 << 13)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 75be00e..62ae300 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -820,6 +820,10 @@
uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift;
uv_cpu_hub_info(cpu)->hub_revision = uv_hub_info->hub_revision;
+ uv_cpu_hub_info(cpu)->m_shift = 64 - m_val;
+ uv_cpu_hub_info(cpu)->n_lshift = is_uv2_1_hub() ?
+ (m_val == 40 ? 40 : 39) : m_val;
+
pnode = uv_apicid_to_pnode(apicid);
blade = boot_pnode_to_blade(pnode);
lcpu = uv_blade_info[blade].nr_possible_cpus;
@@ -850,8 +854,7 @@
if (uv_node_to_blade[nid] >= 0)
continue;
paddr = node_start_pfn(nid) << PAGE_SHIFT;
- paddr = uv_soc_phys_ram_to_gpa(paddr);
- pnode = (paddr >> m_val) & pnode_mask;
+ pnode = uv_gpa_to_pnode(uv_soc_phys_ram_to_gpa(paddr));
blade = boot_pnode_to_blade(pnode);
uv_node_to_blade[nid] = blade;
}
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index fe6eb19..25f24dc 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -15,6 +15,7 @@
obj-y := intel_cacheinfo.o scattered.o topology.o
obj-y += proc.o capflags.o powerflags.o common.o
obj-y += vmware.o hypervisor.o sched.o mshyperv.o
+obj-y += rdrand.o
obj-$(CONFIG_X86_32) += bugs.o
obj-$(CONFIG_X86_64) += bugs_64.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index b13ed39..46ae4f65f 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1,5 +1,6 @@
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/elf.h>
#include <linux/mm.h>
#include <linux/io.h>
@@ -410,8 +411,38 @@
#endif
}
+static void __cpuinit bsp_init_amd(struct cpuinfo_x86 *c)
+{
+ if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
+
+ if (c->x86 > 0x10 ||
+ (c->x86 == 0x10 && c->x86_model >= 0x2)) {
+ u64 val;
+
+ rdmsrl(MSR_K7_HWCR, val);
+ if (!(val & BIT(24)))
+ printk(KERN_WARNING FW_BUG "TSC doesn't count "
+ "with P0 frequency!\n");
+ }
+ }
+
+ if (c->x86 == 0x15) {
+ unsigned long upperbit;
+ u32 cpuid, assoc;
+
+ cpuid = cpuid_edx(0x80000005);
+ assoc = cpuid >> 16 & 0xff;
+ upperbit = ((cpuid >> 24) << 10) / assoc;
+
+ va_align.mask = (upperbit - 1) & PAGE_MASK;
+ va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
+ }
+}
+
static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
{
+ u32 dummy;
+
early_init_amd_mc(c);
/*
@@ -442,22 +473,7 @@
}
#endif
- /* We need to do the following only once */
- if (c != &boot_cpu_data)
- return;
-
- if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
-
- if (c->x86 > 0x10 ||
- (c->x86 == 0x10 && c->x86_model >= 0x2)) {
- u64 val;
-
- rdmsrl(MSR_K7_HWCR, val);
- if (!(val & BIT(24)))
- printk(KERN_WARNING FW_BUG "TSC doesn't count "
- "with P0 frequency!\n");
- }
- }
+ rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
}
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -679,6 +695,7 @@
.c_size_cache = amd_size_cache,
#endif
.c_early_init = early_init_amd,
+ .c_bsp_init = bsp_init_amd,
.c_init = init_amd,
.c_x86_vendor = X86_VENDOR_AMD,
};
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6218439..aa003b1 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -15,6 +15,7 @@
#include <asm/stackprotector.h>
#include <asm/perf_event.h>
#include <asm/mmu_context.h>
+#include <asm/archrandom.h>
#include <asm/hypervisor.h>
#include <asm/processor.h>
#include <asm/sections.h>
@@ -681,6 +682,9 @@
filter_cpuid_features(c, false);
setup_smep(c);
+
+ if (this_cpu->c_bsp_init)
+ this_cpu->c_bsp_init(c);
}
void __init early_cpu_init(void)
@@ -857,6 +861,7 @@
#endif
init_hypervisor(c);
+ x86_init_rdrand(c);
/*
* Clear/Set all flags overriden by options, need do it
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index e765633..1b22dcc 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -18,6 +18,7 @@
struct cpu_model_info c_models[4];
void (*c_early_init)(struct cpuinfo_x86 *);
+ void (*c_bsp_init)(struct cpuinfo_x86 *);
void (*c_init)(struct cpuinfo_x86 *);
void (*c_identify)(struct cpuinfo_x86 *);
unsigned int (*c_size_cache)(struct cpuinfo_x86 *, unsigned int);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index ed6086e..5231312 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -47,6 +47,15 @@
(c->x86 == 0x6 && c->x86_model >= 0x0e))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+ if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64)) {
+ unsigned lower_word;
+
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+ /* Required by the SDM */
+ sync_core();
+ rdmsr(MSR_IA32_UCODE_REV, lower_word, c->microcode);
+ }
+
/*
* Atom erratum AAE44/AAF40/AAG38/AAH41:
*
@@ -55,17 +64,10 @@
* need the microcode to have already been loaded... so if it is
* not, recommend a BIOS update and disable large pages.
*/
- if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2) {
- u32 ucode, junk;
-
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- sync_core();
- rdmsr(MSR_IA32_UCODE_REV, junk, ucode);
-
- if (ucode < 0x20e) {
- printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
- clear_cpu_cap(c, X86_FEATURE_PSE);
- }
+ if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 &&
+ c->microcode < 0x20e) {
+ printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
+ clear_cpu_cap(c, X86_FEATURE_PSE);
}
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index c105c53..a3b0811 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -151,28 +151,17 @@
u32 full;
};
-struct amd_l3_cache {
- struct amd_northbridge *nb;
- unsigned indices;
- u8 subcaches[4];
-};
-
-struct _cpuid4_info {
- union _cpuid4_leaf_eax eax;
- union _cpuid4_leaf_ebx ebx;
- union _cpuid4_leaf_ecx ecx;
- unsigned long size;
- struct amd_l3_cache *l3;
- DECLARE_BITMAP(shared_cpu_map, NR_CPUS);
-};
-
-/* subset of above _cpuid4_info w/o shared_cpu_map */
struct _cpuid4_info_regs {
union _cpuid4_leaf_eax eax;
union _cpuid4_leaf_ebx ebx;
union _cpuid4_leaf_ecx ecx;
unsigned long size;
- struct amd_l3_cache *l3;
+ struct amd_northbridge *nb;
+};
+
+struct _cpuid4_info {
+ struct _cpuid4_info_regs base;
+ DECLARE_BITMAP(shared_cpu_map, NR_CPUS);
};
unsigned short num_cache_leaves;
@@ -314,16 +303,23 @@
/*
* L3 cache descriptors
*/
-static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3)
+static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb)
{
+ struct amd_l3_cache *l3 = &nb->l3_cache;
unsigned int sc0, sc1, sc2, sc3;
u32 val = 0;
- pci_read_config_dword(l3->nb->misc, 0x1C4, &val);
+ pci_read_config_dword(nb->misc, 0x1C4, &val);
/* calculate subcache sizes */
l3->subcaches[0] = sc0 = !(val & BIT(0));
l3->subcaches[1] = sc1 = !(val & BIT(4));
+
+ if (boot_cpu_data.x86 == 0x15) {
+ l3->subcaches[0] = sc0 += !(val & BIT(1));
+ l3->subcaches[1] = sc1 += !(val & BIT(5));
+ }
+
l3->subcaches[2] = sc2 = !(val & BIT(8)) + !(val & BIT(9));
l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13));
@@ -333,33 +329,16 @@
static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
int index)
{
- static struct amd_l3_cache *__cpuinitdata l3_caches;
int node;
/* only for L3, and not in virtualized environments */
- if (index < 3 || amd_nb_num() == 0)
+ if (index < 3)
return;
- /*
- * Strictly speaking, the amount in @size below is leaked since it is
- * never freed but this is done only on shutdown so it doesn't matter.
- */
- if (!l3_caches) {
- int size = amd_nb_num() * sizeof(struct amd_l3_cache);
-
- l3_caches = kzalloc(size, GFP_ATOMIC);
- if (!l3_caches)
- return;
- }
-
node = amd_get_nb_id(smp_processor_id());
-
- if (!l3_caches[node].nb) {
- l3_caches[node].nb = node_to_amd_nb(node);
- amd_calc_l3_indices(&l3_caches[node]);
- }
-
- this_leaf->l3 = &l3_caches[node];
+ this_leaf->nb = node_to_amd_nb(node);
+ if (this_leaf->nb && !this_leaf->nb->l3_cache.indices)
+ amd_calc_l3_indices(this_leaf->nb);
}
/*
@@ -369,11 +348,11 @@
*
* @returns: the disabled index if used or negative value if slot free.
*/
-int amd_get_l3_disable_slot(struct amd_l3_cache *l3, unsigned slot)
+int amd_get_l3_disable_slot(struct amd_northbridge *nb, unsigned slot)
{
unsigned int reg = 0;
- pci_read_config_dword(l3->nb->misc, 0x1BC + slot * 4, ®);
+ pci_read_config_dword(nb->misc, 0x1BC + slot * 4, ®);
/* check whether this slot is activated already */
if (reg & (3UL << 30))
@@ -387,11 +366,10 @@
{
int index;
- if (!this_leaf->l3 ||
- !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
+ if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
return -EINVAL;
- index = amd_get_l3_disable_slot(this_leaf->l3, slot);
+ index = amd_get_l3_disable_slot(this_leaf->base.nb, slot);
if (index >= 0)
return sprintf(buf, "%d\n", index);
@@ -408,7 +386,7 @@
SHOW_CACHE_DISABLE(0)
SHOW_CACHE_DISABLE(1)
-static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu,
+static void amd_l3_disable_index(struct amd_northbridge *nb, int cpu,
unsigned slot, unsigned long idx)
{
int i;
@@ -421,10 +399,10 @@
for (i = 0; i < 4; i++) {
u32 reg = idx | (i << 20);
- if (!l3->subcaches[i])
+ if (!nb->l3_cache.subcaches[i])
continue;
- pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg);
+ pci_write_config_dword(nb->misc, 0x1BC + slot * 4, reg);
/*
* We need to WBINVD on a core on the node containing the L3
@@ -434,7 +412,7 @@
wbinvd_on_cpu(cpu);
reg |= BIT(31);
- pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg);
+ pci_write_config_dword(nb->misc, 0x1BC + slot * 4, reg);
}
}
@@ -448,24 +426,24 @@
*
* @return: 0 on success, error status on failure
*/
-int amd_set_l3_disable_slot(struct amd_l3_cache *l3, int cpu, unsigned slot,
+int amd_set_l3_disable_slot(struct amd_northbridge *nb, int cpu, unsigned slot,
unsigned long index)
{
int ret = 0;
/* check if @slot is already used or the index is already disabled */
- ret = amd_get_l3_disable_slot(l3, slot);
+ ret = amd_get_l3_disable_slot(nb, slot);
if (ret >= 0)
return -EINVAL;
- if (index > l3->indices)
+ if (index > nb->l3_cache.indices)
return -EINVAL;
/* check whether the other slot has disabled the same index already */
- if (index == amd_get_l3_disable_slot(l3, !slot))
+ if (index == amd_get_l3_disable_slot(nb, !slot))
return -EINVAL;
- amd_l3_disable_index(l3, cpu, slot, index);
+ amd_l3_disable_index(nb, cpu, slot, index);
return 0;
}
@@ -480,8 +458,7 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (!this_leaf->l3 ||
- !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
+ if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
return -EINVAL;
cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
@@ -489,7 +466,7 @@
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
- err = amd_set_l3_disable_slot(this_leaf->l3, cpu, slot, val);
+ err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val);
if (err) {
if (err == -EEXIST)
printk(KERN_WARNING "L3 disable slot %d in use!\n",
@@ -518,7 +495,7 @@
static ssize_t
show_subcaches(struct _cpuid4_info *this_leaf, char *buf, unsigned int cpu)
{
- if (!this_leaf->l3 || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
+ if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
return -EINVAL;
return sprintf(buf, "%x\n", amd_get_subcaches(cpu));
@@ -533,7 +510,7 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (!this_leaf->l3 || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
+ if (!this_leaf->base.nb || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
return -EINVAL;
if (strict_strtoul(buf, 16, &val) < 0)
@@ -769,7 +746,7 @@
return;
}
this_leaf = CPUID4_INFO_IDX(cpu, index);
- num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
+ num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing;
if (num_threads_sharing == 1)
cpumask_set_cpu(cpu, to_cpumask(this_leaf->shared_cpu_map));
@@ -820,29 +797,19 @@
for (i = 0; i < num_cache_leaves; i++)
cache_remove_shared_cpu_map(cpu, i);
- kfree(per_cpu(ici_cpuid4_info, cpu)->l3);
kfree(per_cpu(ici_cpuid4_info, cpu));
per_cpu(ici_cpuid4_info, cpu) = NULL;
}
-static int
-__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
-{
- struct _cpuid4_info_regs *leaf_regs =
- (struct _cpuid4_info_regs *)this_leaf;
-
- return cpuid4_cache_lookup_regs(index, leaf_regs);
-}
-
static void __cpuinit get_cpu_leaves(void *_retval)
{
int j, *retval = _retval, cpu = smp_processor_id();
/* Do cpuid and store the results */
for (j = 0; j < num_cache_leaves; j++) {
- struct _cpuid4_info *this_leaf;
- this_leaf = CPUID4_INFO_IDX(cpu, j);
- *retval = cpuid4_cache_lookup(j, this_leaf);
+ struct _cpuid4_info *this_leaf = CPUID4_INFO_IDX(cpu, j);
+
+ *retval = cpuid4_cache_lookup_regs(j, &this_leaf->base);
if (unlikely(*retval < 0)) {
int i;
@@ -900,16 +867,16 @@
return sprintf(buf, "%lu\n", (unsigned long)this_leaf->object + val); \
}
-show_one_plus(level, eax.split.level, 0);
-show_one_plus(coherency_line_size, ebx.split.coherency_line_size, 1);
-show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1);
-show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1);
-show_one_plus(number_of_sets, ecx.split.number_of_sets, 1);
+show_one_plus(level, base.eax.split.level, 0);
+show_one_plus(coherency_line_size, base.ebx.split.coherency_line_size, 1);
+show_one_plus(physical_line_partition, base.ebx.split.physical_line_partition, 1);
+show_one_plus(ways_of_associativity, base.ebx.split.ways_of_associativity, 1);
+show_one_plus(number_of_sets, base.ecx.split.number_of_sets, 1);
static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf,
unsigned int cpu)
{
- return sprintf(buf, "%luK\n", this_leaf->size / 1024);
+ return sprintf(buf, "%luK\n", this_leaf->base.size / 1024);
}
static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
@@ -946,7 +913,7 @@
static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf,
unsigned int cpu)
{
- switch (this_leaf->eax.split.type) {
+ switch (this_leaf->base.eax.split.type) {
case CACHE_TYPE_DATA:
return sprintf(buf, "Data\n");
case CACHE_TYPE_INST:
@@ -1135,7 +1102,7 @@
ktype_cache.default_attrs = default_attrs;
#ifdef CONFIG_AMD_NB
- if (this_leaf->l3)
+ if (this_leaf->base.nb)
ktype_cache.default_attrs = amd_l3_attrs();
#endif
retval = kobject_init_and_add(&(this_object->kobj),
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index fce51ad1..864830e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -36,7 +36,6 @@
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/debugfs.h>
-#include <linux/edac_mce.h>
#include <linux/irq_work.h>
#include <asm/processor.h>
@@ -144,23 +143,20 @@
void mce_log(struct mce *mce)
{
unsigned next, entry;
+ int ret = 0;
/* Emit the trace record: */
trace_mce_record(mce);
+ ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
+ if (ret == NOTIFY_STOP)
+ return;
+
mce->finished = 0;
wmb();
for (;;) {
entry = rcu_dereference_check_mce(mcelog.next);
for (;;) {
- /*
- * If edac_mce is enabled, it will check the error type
- * and will process it, if it is a known error.
- * Otherwise, the error will be sent through mcelog
- * interface
- */
- if (edac_mce_parse(mce))
- return;
/*
* When the buffer fills up discard new entries.
@@ -217,8 +213,13 @@
pr_cont("MISC %llx ", m->misc);
pr_cont("\n");
- pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
- m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid);
+ /*
+ * Note this output is parsed by external tools and old fields
+ * should not be changed.
+ */
+ pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x microcode %x\n",
+ m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid,
+ cpu_data(m->extcpu).microcode);
/*
* Print out human-readable details about the MCE error,
@@ -551,10 +552,8 @@
* Don't get the IP here because it's unlikely to
* have anything to do with the actual error location.
*/
- if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
+ if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce)
mce_log(&m);
- atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m);
- }
/*
* Clear state for this bank.
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index d944bf6..0a630dd 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -11,6 +11,8 @@
*/
#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/clocksource.h>
#include <linux/module.h>
#include <asm/processor.h>
#include <asm/hypervisor.h>
@@ -36,6 +38,25 @@
!memcmp("Microsoft Hv", hyp_signature, 12);
}
+static cycle_t read_hv_clock(struct clocksource *arg)
+{
+ cycle_t current_tick;
+ /*
+ * Read the partition counter to get the current tick count. This count
+ * is set to 0 when the partition is created and is incremented in
+ * 100 nanosecond units.
+ */
+ rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
+ return current_tick;
+}
+
+static struct clocksource hyperv_cs = {
+ .name = "hyperv_clocksource",
+ .rating = 400, /* use this when running on Hyperv*/
+ .read = read_hv_clock,
+ .mask = CLOCKSOURCE_MASK(64),
+};
+
static void __init ms_hyperv_init_platform(void)
{
/*
@@ -46,6 +67,8 @@
printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
ms_hyperv.features, ms_hyperv.hints);
+
+ clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
}
const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 62ac8cb..14b2314 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -85,6 +85,8 @@
seq_printf(m, "stepping\t: %d\n", c->x86_mask);
else
seq_printf(m, "stepping\t: unknown\n");
+ if (c->microcode)
+ seq_printf(m, "microcode\t: 0x%x\n", c->microcode);
if (cpu_has(c, X86_FEATURE_TSC)) {
unsigned int freq = cpufreq_quick_get(cpu);
diff --git a/arch/x86/kernel/cpu/rdrand.c b/arch/x86/kernel/cpu/rdrand.c
new file mode 100644
index 0000000..feca286
--- /dev/null
+++ b/arch/x86/kernel/cpu/rdrand.c
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the Linux kernel.
+ *
+ * Copyright (c) 2011, Intel Corporation
+ * Authors: Fenghua Yu <fenghua.yu@intel.com>,
+ * H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/archrandom.h>
+#include <asm/sections.h>
+
+static int __init x86_rdrand_setup(char *s)
+{
+ setup_clear_cpu_cap(X86_FEATURE_RDRAND);
+ return 1;
+}
+__setup("nordrand", x86_rdrand_setup);
+
+/* We can't use arch_get_random_long() here since alternatives haven't run */
+static inline int rdrand_long(unsigned long *v)
+{
+ int ok;
+ asm volatile("1: " RDRAND_LONG "\n\t"
+ "jc 2f\n\t"
+ "decl %0\n\t"
+ "jnz 1b\n\t"
+ "2:"
+ : "=r" (ok), "=a" (*v)
+ : "0" (RDRAND_RETRY_LOOPS));
+ return ok;
+}
+
+/*
+ * Force a reseed cycle; we are architecturally guaranteed a reseed
+ * after no more than 512 128-bit chunks of random data. This also
+ * acts as a test of the CPU capability.
+ */
+#define RESEED_LOOP ((512*128)/sizeof(unsigned long))
+
+void __cpuinit x86_init_rdrand(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_ARCH_RANDOM
+ unsigned long tmp;
+ int i, count, ok;
+
+ if (!cpu_has(c, X86_FEATURE_RDRAND))
+ return; /* Nothing to do */
+
+ for (count = i = 0; i < RESEED_LOOP; i++) {
+ ok = rdrand_long(&tmp);
+ if (ok)
+ count++;
+ }
+
+ if (count != RESEED_LOOP)
+ clear_cpu_cap(c, X86_FEATURE_RDRAND);
+#endif
+}
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 591be0e..d494799 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -74,14 +74,13 @@
static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
- u32 dummy;
if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
pr_warning("CPU%d: family %d not supported\n", cpu, c->x86);
return -1;
}
- rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
+ csig->rev = c->microcode;
pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
return 0;
@@ -130,6 +129,7 @@
int cpu_num = raw_smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
struct microcode_amd *mc_amd = uci->mc;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
/* We should bind the task to the CPU */
BUG_ON(cpu_num != cpu);
@@ -150,6 +150,7 @@
pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev);
uci->cpu_sig.rev = rev;
+ c->microcode = rev;
return 0;
}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index f924280..f2d2a66 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -483,7 +483,13 @@
sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
pr_debug("CPU%d removed\n", cpu);
break;
- case CPU_DEAD:
+
+ /*
+ * When a CPU goes offline, don't free up or invalidate the copy of
+ * the microcode in kernel memory, so that we can reuse it when the
+ * CPU comes back online without unnecessarily requesting the userspace
+ * for it again.
+ */
case CPU_UP_CANCELED_FROZEN:
/* The CPU refused to come up during a system resume */
microcode_fini_cpu(cpu);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 1a1b606..3ca42d0 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -161,12 +161,7 @@
csig->pf = 1 << ((val[1] >> 18) & 7);
}
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- /* see notes above for revision 1.07. Apparent chip bug */
- sync_core();
- /* get the current revision from MSR 0x8B */
- rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
-
+ csig->rev = c->microcode;
pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
cpu_num, csig->sig, csig->pf, csig->rev);
@@ -299,9 +294,9 @@
struct microcode_intel *mc_intel;
struct ucode_cpu_info *uci;
unsigned int val[2];
- int cpu_num;
+ int cpu_num = raw_smp_processor_id();
+ struct cpuinfo_x86 *c = &cpu_data(cpu_num);
- cpu_num = raw_smp_processor_id();
uci = ucode_cpu_info + cpu;
mc_intel = uci->mc;
@@ -317,7 +312,7 @@
(unsigned long) mc_intel->bits >> 16 >> 16);
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- /* see notes above for revision 1.07. Apparent chip bug */
+ /* As documented in the SDM: Do a CPUID 1 here */
sync_core();
/* get the current revision from MSR 0x8B */
@@ -335,6 +330,7 @@
(mc_intel->hdr.date >> 16) & 0xff);
uci->cpu_sig.rev = val[1];
+ c->microcode = val[1];
return 0;
}
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index ff14a50..0514890 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -14,10 +14,73 @@
#include <linux/personality.h>
#include <linux/random.h>
#include <linux/uaccess.h>
+#include <linux/elf.h>
#include <asm/ia32.h>
#include <asm/syscalls.h>
+/*
+ * Align a virtual address to avoid aliasing in the I$ on AMD F15h.
+ *
+ * @flags denotes the allocation direction - bottomup or topdown -
+ * or vDSO; see call sites below.
+ */
+unsigned long align_addr(unsigned long addr, struct file *filp,
+ enum align_flags flags)
+{
+ unsigned long tmp_addr;
+
+ /* handle 32- and 64-bit case with a single conditional */
+ if (va_align.flags < 0 || !(va_align.flags & (2 - mmap_is_ia32())))
+ return addr;
+
+ if (!(current->flags & PF_RANDOMIZE))
+ return addr;
+
+ if (!((flags & ALIGN_VDSO) || filp))
+ return addr;
+
+ tmp_addr = addr;
+
+ /*
+ * We need an address which is <= than the original
+ * one only when in topdown direction.
+ */
+ if (!(flags & ALIGN_TOPDOWN))
+ tmp_addr += va_align.mask;
+
+ tmp_addr &= ~va_align.mask;
+
+ return tmp_addr;
+}
+
+static int __init control_va_addr_alignment(char *str)
+{
+ /* guard against enabling this on other CPU families */
+ if (va_align.flags < 0)
+ return 1;
+
+ if (*str == 0)
+ return 1;
+
+ if (*str == '=')
+ str++;
+
+ if (!strcmp(str, "32"))
+ va_align.flags = ALIGN_VA_32;
+ else if (!strcmp(str, "64"))
+ va_align.flags = ALIGN_VA_64;
+ else if (!strcmp(str, "off"))
+ va_align.flags = 0;
+ else if (!strcmp(str, "on"))
+ va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
+ else
+ return 0;
+
+ return 1;
+}
+__setup("align_va_addr", control_va_addr_alignment);
+
SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
unsigned long, fd, unsigned long, off)
@@ -92,6 +155,9 @@
start_addr = addr;
full_search:
+
+ addr = align_addr(addr, filp, 0);
+
for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
/* At this point: (!vma || addr < vma->vm_end). */
if (end - len < addr) {
@@ -117,6 +183,7 @@
mm->cached_hole_size = vma->vm_start - addr;
addr = vma->vm_end;
+ addr = align_addr(addr, filp, 0);
}
}
@@ -161,10 +228,13 @@
/* make sure it can fit in the remaining address space */
if (addr > len) {
- vma = find_vma(mm, addr-len);
- if (!vma || addr <= vma->vm_start)
+ unsigned long tmp_addr = align_addr(addr - len, filp,
+ ALIGN_TOPDOWN);
+
+ vma = find_vma(mm, tmp_addr);
+ if (!vma || tmp_addr + len <= vma->vm_start)
/* remember the address as a hint for next time */
- return mm->free_area_cache = addr-len;
+ return mm->free_area_cache = tmp_addr;
}
if (mm->mmap_base < len)
@@ -173,6 +243,8 @@
addr = mm->mmap_base-len;
do {
+ addr = align_addr(addr, filp, ALIGN_TOPDOWN);
+
/*
* Lookup failure means no vma is above this address,
* else if new region fits below vma->vm_start,
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index bc19be3..9a0e312 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -346,3 +346,5 @@
.long sys_syncfs
.long sys_sendmmsg /* 345 */
.long sys_setns
+ .long sys_process_vm_readv
+ .long sys_process_vm_writev
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 8b4cc5f..f1e3be18 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -29,6 +29,39 @@
#include "tss.h"
/*
+ * Operand types
+ */
+#define OpNone 0ull
+#define OpImplicit 1ull /* No generic decode */
+#define OpReg 2ull /* Register */
+#define OpMem 3ull /* Memory */
+#define OpAcc 4ull /* Accumulator: AL/AX/EAX/RAX */
+#define OpDI 5ull /* ES:DI/EDI/RDI */
+#define OpMem64 6ull /* Memory, 64-bit */
+#define OpImmUByte 7ull /* Zero-extended 8-bit immediate */
+#define OpDX 8ull /* DX register */
+#define OpCL 9ull /* CL register (for shifts) */
+#define OpImmByte 10ull /* 8-bit sign extended immediate */
+#define OpOne 11ull /* Implied 1 */
+#define OpImm 12ull /* Sign extended immediate */
+#define OpMem16 13ull /* Memory operand (16-bit). */
+#define OpMem32 14ull /* Memory operand (32-bit). */
+#define OpImmU 15ull /* Immediate operand, zero extended */
+#define OpSI 16ull /* SI/ESI/RSI */
+#define OpImmFAddr 17ull /* Immediate far address */
+#define OpMemFAddr 18ull /* Far address in memory */
+#define OpImmU16 19ull /* Immediate operand, 16 bits, zero extended */
+#define OpES 20ull /* ES */
+#define OpCS 21ull /* CS */
+#define OpSS 22ull /* SS */
+#define OpDS 23ull /* DS */
+#define OpFS 24ull /* FS */
+#define OpGS 25ull /* GS */
+
+#define OpBits 5 /* Width of operand field */
+#define OpMask ((1ull << OpBits) - 1)
+
+/*
* Opcode effective-address decode tables.
* Note that we only emulate instructions that have at least one memory
* operand (excluding implicit stack references). We assume that stack
@@ -40,37 +73,35 @@
/* Operand sizes: 8-bit operands or specified/overridden size. */
#define ByteOp (1<<0) /* 8-bit operands. */
/* Destination operand type. */
-#define ImplicitOps (1<<1) /* Implicit in opcode. No generic decode. */
-#define DstReg (2<<1) /* Register operand. */
-#define DstMem (3<<1) /* Memory operand. */
-#define DstAcc (4<<1) /* Destination Accumulator */
-#define DstDI (5<<1) /* Destination is in ES:(E)DI */
-#define DstMem64 (6<<1) /* 64bit memory operand */
-#define DstImmUByte (7<<1) /* 8-bit unsigned immediate operand */
-#define DstDX (8<<1) /* Destination is in DX register */
-#define DstMask (0xf<<1)
+#define DstShift 1
+#define ImplicitOps (OpImplicit << DstShift)
+#define DstReg (OpReg << DstShift)
+#define DstMem (OpMem << DstShift)
+#define DstAcc (OpAcc << DstShift)
+#define DstDI (OpDI << DstShift)
+#define DstMem64 (OpMem64 << DstShift)
+#define DstImmUByte (OpImmUByte << DstShift)
+#define DstDX (OpDX << DstShift)
+#define DstMask (OpMask << DstShift)
/* Source operand type. */
-#define SrcNone (0<<5) /* No source operand. */
-#define SrcReg (1<<5) /* Register operand. */
-#define SrcMem (2<<5) /* Memory operand. */
-#define SrcMem16 (3<<5) /* Memory operand (16-bit). */
-#define SrcMem32 (4<<5) /* Memory operand (32-bit). */
-#define SrcImm (5<<5) /* Immediate operand. */
-#define SrcImmByte (6<<5) /* 8-bit sign-extended immediate operand. */
-#define SrcOne (7<<5) /* Implied '1' */
-#define SrcImmUByte (8<<5) /* 8-bit unsigned immediate operand. */
-#define SrcImmU (9<<5) /* Immediate operand, unsigned */
-#define SrcSI (0xa<<5) /* Source is in the DS:RSI */
-#define SrcImmFAddr (0xb<<5) /* Source is immediate far address */
-#define SrcMemFAddr (0xc<<5) /* Source is far address in memory */
-#define SrcAcc (0xd<<5) /* Source Accumulator */
-#define SrcImmU16 (0xe<<5) /* Immediate operand, unsigned, 16 bits */
-#define SrcDX (0xf<<5) /* Source is in DX register */
-#define SrcMask (0xf<<5)
-/* Generic ModRM decode. */
-#define ModRM (1<<9)
-/* Destination is only written; never read. */
-#define Mov (1<<10)
+#define SrcShift 6
+#define SrcNone (OpNone << SrcShift)
+#define SrcReg (OpReg << SrcShift)
+#define SrcMem (OpMem << SrcShift)
+#define SrcMem16 (OpMem16 << SrcShift)
+#define SrcMem32 (OpMem32 << SrcShift)
+#define SrcImm (OpImm << SrcShift)
+#define SrcImmByte (OpImmByte << SrcShift)
+#define SrcOne (OpOne << SrcShift)
+#define SrcImmUByte (OpImmUByte << SrcShift)
+#define SrcImmU (OpImmU << SrcShift)
+#define SrcSI (OpSI << SrcShift)
+#define SrcImmFAddr (OpImmFAddr << SrcShift)
+#define SrcMemFAddr (OpMemFAddr << SrcShift)
+#define SrcAcc (OpAcc << SrcShift)
+#define SrcImmU16 (OpImmU16 << SrcShift)
+#define SrcDX (OpDX << SrcShift)
+#define SrcMask (OpMask << SrcShift)
#define BitOp (1<<11)
#define MemAbs (1<<12) /* Memory operand is absolute displacement */
#define String (1<<13) /* String instruction (rep capable) */
@@ -81,6 +112,10 @@
#define Prefix (3<<15) /* Instruction varies with 66/f2/f3 prefix */
#define RMExt (4<<15) /* Opcode extension in ModRM r/m if mod == 3 */
#define Sse (1<<18) /* SSE Vector instruction */
+/* Generic ModRM decode. */
+#define ModRM (1<<19)
+/* Destination is only written; never read. */
+#define Mov (1<<20)
/* Misc flags */
#define Prot (1<<21) /* instruction generates #UD if not in prot-mode */
#define VendorSpecific (1<<22) /* Vendor specific instruction */
@@ -91,12 +126,19 @@
#define Priv (1<<27) /* instruction generates #GP if current CPL != 0 */
#define No64 (1<<28)
/* Source 2 operand type */
-#define Src2None (0<<29)
-#define Src2CL (1<<29)
-#define Src2ImmByte (2<<29)
-#define Src2One (3<<29)
-#define Src2Imm (4<<29)
-#define Src2Mask (7<<29)
+#define Src2Shift (29)
+#define Src2None (OpNone << Src2Shift)
+#define Src2CL (OpCL << Src2Shift)
+#define Src2ImmByte (OpImmByte << Src2Shift)
+#define Src2One (OpOne << Src2Shift)
+#define Src2Imm (OpImm << Src2Shift)
+#define Src2ES (OpES << Src2Shift)
+#define Src2CS (OpCS << Src2Shift)
+#define Src2SS (OpSS << Src2Shift)
+#define Src2DS (OpDS << Src2Shift)
+#define Src2FS (OpFS << Src2Shift)
+#define Src2GS (OpGS << Src2Shift)
+#define Src2Mask (OpMask << Src2Shift)
#define X2(x...) x, x
#define X3(x...) X2(x), x
@@ -108,8 +150,8 @@
#define X16(x...) X8(x), X8(x)
struct opcode {
- u32 flags;
- u8 intercept;
+ u64 flags : 56;
+ u64 intercept : 8;
union {
int (*execute)(struct x86_emulate_ctxt *ctxt);
struct opcode *group;
@@ -205,105 +247,100 @@
#define ON64(x)
#endif
-#define ____emulate_2op(_op, _src, _dst, _eflags, _x, _y, _suffix, _dsttype) \
+#define ____emulate_2op(ctxt, _op, _x, _y, _suffix, _dsttype) \
do { \
__asm__ __volatile__ ( \
_PRE_EFLAGS("0", "4", "2") \
_op _suffix " %"_x"3,%1; " \
_POST_EFLAGS("0", "4", "2") \
- : "=m" (_eflags), "+q" (*(_dsttype*)&(_dst).val),\
+ : "=m" ((ctxt)->eflags), \
+ "+q" (*(_dsttype*)&(ctxt)->dst.val), \
"=&r" (_tmp) \
- : _y ((_src).val), "i" (EFLAGS_MASK)); \
+ : _y ((ctxt)->src.val), "i" (EFLAGS_MASK)); \
} while (0)
/* Raw emulation: instruction has two explicit operands. */
-#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
+#define __emulate_2op_nobyte(ctxt,_op,_wx,_wy,_lx,_ly,_qx,_qy) \
do { \
unsigned long _tmp; \
\
- switch ((_dst).bytes) { \
+ switch ((ctxt)->dst.bytes) { \
case 2: \
- ____emulate_2op(_op,_src,_dst,_eflags,_wx,_wy,"w",u16);\
+ ____emulate_2op(ctxt,_op,_wx,_wy,"w",u16); \
break; \
case 4: \
- ____emulate_2op(_op,_src,_dst,_eflags,_lx,_ly,"l",u32);\
+ ____emulate_2op(ctxt,_op,_lx,_ly,"l",u32); \
break; \
case 8: \
- ON64(____emulate_2op(_op,_src,_dst,_eflags,_qx,_qy,"q",u64)); \
+ ON64(____emulate_2op(ctxt,_op,_qx,_qy,"q",u64)); \
break; \
} \
} while (0)
-#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
+#define __emulate_2op(ctxt,_op,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
do { \
unsigned long _tmp; \
- switch ((_dst).bytes) { \
+ switch ((ctxt)->dst.bytes) { \
case 1: \
- ____emulate_2op(_op,_src,_dst,_eflags,_bx,_by,"b",u8); \
+ ____emulate_2op(ctxt,_op,_bx,_by,"b",u8); \
break; \
default: \
- __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
+ __emulate_2op_nobyte(ctxt, _op, \
_wx, _wy, _lx, _ly, _qx, _qy); \
break; \
} \
} while (0)
/* Source operand is byte-sized and may be restricted to just %cl. */
-#define emulate_2op_SrcB(_op, _src, _dst, _eflags) \
- __emulate_2op(_op, _src, _dst, _eflags, \
- "b", "c", "b", "c", "b", "c", "b", "c")
+#define emulate_2op_SrcB(ctxt, _op) \
+ __emulate_2op(ctxt, _op, "b", "c", "b", "c", "b", "c", "b", "c")
/* Source operand is byte, word, long or quad sized. */
-#define emulate_2op_SrcV(_op, _src, _dst, _eflags) \
- __emulate_2op(_op, _src, _dst, _eflags, \
- "b", "q", "w", "r", _LO32, "r", "", "r")
+#define emulate_2op_SrcV(ctxt, _op) \
+ __emulate_2op(ctxt, _op, "b", "q", "w", "r", _LO32, "r", "", "r")
/* Source operand is word, long or quad sized. */
-#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags) \
- __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
- "w", "r", _LO32, "r", "", "r")
+#define emulate_2op_SrcV_nobyte(ctxt, _op) \
+ __emulate_2op_nobyte(ctxt, _op, "w", "r", _LO32, "r", "", "r")
/* Instruction has three operands and one operand is stored in ECX register */
-#define __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, _suffix, _type) \
+#define __emulate_2op_cl(ctxt, _op, _suffix, _type) \
do { \
unsigned long _tmp; \
- _type _clv = (_cl).val; \
- _type _srcv = (_src).val; \
- _type _dstv = (_dst).val; \
+ _type _clv = (ctxt)->src2.val; \
+ _type _srcv = (ctxt)->src.val; \
+ _type _dstv = (ctxt)->dst.val; \
\
__asm__ __volatile__ ( \
_PRE_EFLAGS("0", "5", "2") \
_op _suffix " %4,%1 \n" \
_POST_EFLAGS("0", "5", "2") \
- : "=m" (_eflags), "+r" (_dstv), "=&r" (_tmp) \
+ : "=m" ((ctxt)->eflags), "+r" (_dstv), "=&r" (_tmp) \
: "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK) \
); \
\
- (_cl).val = (unsigned long) _clv; \
- (_src).val = (unsigned long) _srcv; \
- (_dst).val = (unsigned long) _dstv; \
+ (ctxt)->src2.val = (unsigned long) _clv; \
+ (ctxt)->src2.val = (unsigned long) _srcv; \
+ (ctxt)->dst.val = (unsigned long) _dstv; \
} while (0)
-#define emulate_2op_cl(_op, _cl, _src, _dst, _eflags) \
+#define emulate_2op_cl(ctxt, _op) \
do { \
- switch ((_dst).bytes) { \
+ switch ((ctxt)->dst.bytes) { \
case 2: \
- __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
- "w", unsigned short); \
+ __emulate_2op_cl(ctxt, _op, "w", u16); \
break; \
case 4: \
- __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
- "l", unsigned int); \
+ __emulate_2op_cl(ctxt, _op, "l", u32); \
break; \
case 8: \
- ON64(__emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
- "q", unsigned long)); \
+ ON64(__emulate_2op_cl(ctxt, _op, "q", ulong)); \
break; \
} \
} while (0)
-#define __emulate_1op(_op, _dst, _eflags, _suffix) \
+#define __emulate_1op(ctxt, _op, _suffix) \
do { \
unsigned long _tmp; \
\
@@ -311,39 +348,27 @@
_PRE_EFLAGS("0", "3", "2") \
_op _suffix " %1; " \
_POST_EFLAGS("0", "3", "2") \
- : "=m" (_eflags), "+m" ((_dst).val), \
+ : "=m" ((ctxt)->eflags), "+m" ((ctxt)->dst.val), \
"=&r" (_tmp) \
: "i" (EFLAGS_MASK)); \
} while (0)
/* Instruction has only one explicit operand (no source operand). */
-#define emulate_1op(_op, _dst, _eflags) \
+#define emulate_1op(ctxt, _op) \
do { \
- switch ((_dst).bytes) { \
- case 1: __emulate_1op(_op, _dst, _eflags, "b"); break; \
- case 2: __emulate_1op(_op, _dst, _eflags, "w"); break; \
- case 4: __emulate_1op(_op, _dst, _eflags, "l"); break; \
- case 8: ON64(__emulate_1op(_op, _dst, _eflags, "q")); break; \
+ switch ((ctxt)->dst.bytes) { \
+ case 1: __emulate_1op(ctxt, _op, "b"); break; \
+ case 2: __emulate_1op(ctxt, _op, "w"); break; \
+ case 4: __emulate_1op(ctxt, _op, "l"); break; \
+ case 8: ON64(__emulate_1op(ctxt, _op, "q")); break; \
} \
} while (0)
-#define __emulate_1op_rax_rdx(_op, _src, _rax, _rdx, _eflags, _suffix) \
+#define __emulate_1op_rax_rdx(ctxt, _op, _suffix, _ex) \
do { \
unsigned long _tmp; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "4", "1") \
- _op _suffix " %5; " \
- _POST_EFLAGS("0", "4", "1") \
- : "=m" (_eflags), "=&r" (_tmp), \
- "+a" (_rax), "+d" (_rdx) \
- : "i" (EFLAGS_MASK), "m" ((_src).val), \
- "a" (_rax), "d" (_rdx)); \
- } while (0)
-
-#define __emulate_1op_rax_rdx_ex(_op, _src, _rax, _rdx, _eflags, _suffix, _ex) \
- do { \
- unsigned long _tmp; \
+ ulong *rax = &(ctxt)->regs[VCPU_REGS_RAX]; \
+ ulong *rdx = &(ctxt)->regs[VCPU_REGS_RDX]; \
\
__asm__ __volatile__ ( \
_PRE_EFLAGS("0", "5", "1") \
@@ -356,53 +381,27 @@
"jmp 2b \n\t" \
".popsection \n\t" \
_ASM_EXTABLE(1b, 3b) \
- : "=m" (_eflags), "=&r" (_tmp), \
- "+a" (_rax), "+d" (_rdx), "+qm"(_ex) \
- : "i" (EFLAGS_MASK), "m" ((_src).val), \
- "a" (_rax), "d" (_rdx)); \
+ : "=m" ((ctxt)->eflags), "=&r" (_tmp), \
+ "+a" (*rax), "+d" (*rdx), "+qm"(_ex) \
+ : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val), \
+ "a" (*rax), "d" (*rdx)); \
} while (0)
/* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */
-#define emulate_1op_rax_rdx(_op, _src, _rax, _rdx, _eflags) \
+#define emulate_1op_rax_rdx(ctxt, _op, _ex) \
do { \
- switch((_src).bytes) { \
+ switch((ctxt)->src.bytes) { \
case 1: \
- __emulate_1op_rax_rdx(_op, _src, _rax, _rdx, \
- _eflags, "b"); \
+ __emulate_1op_rax_rdx(ctxt, _op, "b", _ex); \
break; \
case 2: \
- __emulate_1op_rax_rdx(_op, _src, _rax, _rdx, \
- _eflags, "w"); \
+ __emulate_1op_rax_rdx(ctxt, _op, "w", _ex); \
break; \
case 4: \
- __emulate_1op_rax_rdx(_op, _src, _rax, _rdx, \
- _eflags, "l"); \
- break; \
- case 8: \
- ON64(__emulate_1op_rax_rdx(_op, _src, _rax, _rdx, \
- _eflags, "q")); \
- break; \
- } \
- } while (0)
-
-#define emulate_1op_rax_rdx_ex(_op, _src, _rax, _rdx, _eflags, _ex) \
- do { \
- switch((_src).bytes) { \
- case 1: \
- __emulate_1op_rax_rdx_ex(_op, _src, _rax, _rdx, \
- _eflags, "b", _ex); \
- break; \
- case 2: \
- __emulate_1op_rax_rdx_ex(_op, _src, _rax, _rdx, \
- _eflags, "w", _ex); \
- break; \
- case 4: \
- __emulate_1op_rax_rdx_ex(_op, _src, _rax, _rdx, \
- _eflags, "l", _ex); \
+ __emulate_1op_rax_rdx(ctxt, _op, "l", _ex); \
break; \
case 8: ON64( \
- __emulate_1op_rax_rdx_ex(_op, _src, _rax, _rdx, \
- _eflags, "q", _ex)); \
+ __emulate_1op_rax_rdx(ctxt, _op, "q", _ex)); \
break; \
} \
} while (0)
@@ -651,41 +650,50 @@
return ctxt->ops->read_std(ctxt, linear, data, size, &ctxt->exception);
}
-static int do_insn_fetch_byte(struct x86_emulate_ctxt *ctxt,
- unsigned long eip, u8 *dest)
+/*
+ * Fetch the next byte of the instruction being emulated which is pointed to
+ * by ctxt->_eip, then increment ctxt->_eip.
+ *
+ * Also prefetch the remaining bytes of the instruction without crossing page
+ * boundary if they are not in fetch_cache yet.
+ */
+static int do_insn_fetch_byte(struct x86_emulate_ctxt *ctxt, u8 *dest)
{
struct fetch_cache *fc = &ctxt->fetch;
int rc;
int size, cur_size;
- if (eip == fc->end) {
+ if (ctxt->_eip == fc->end) {
unsigned long linear;
- struct segmented_address addr = { .seg=VCPU_SREG_CS, .ea=eip};
+ struct segmented_address addr = { .seg = VCPU_SREG_CS,
+ .ea = ctxt->_eip };
cur_size = fc->end - fc->start;
- size = min(15UL - cur_size, PAGE_SIZE - offset_in_page(eip));
+ size = min(15UL - cur_size,
+ PAGE_SIZE - offset_in_page(ctxt->_eip));
rc = __linearize(ctxt, addr, size, false, true, &linear);
- if (rc != X86EMUL_CONTINUE)
+ if (unlikely(rc != X86EMUL_CONTINUE))
return rc;
rc = ctxt->ops->fetch(ctxt, linear, fc->data + cur_size,
size, &ctxt->exception);
- if (rc != X86EMUL_CONTINUE)
+ if (unlikely(rc != X86EMUL_CONTINUE))
return rc;
fc->end += size;
}
- *dest = fc->data[eip - fc->start];
+ *dest = fc->data[ctxt->_eip - fc->start];
+ ctxt->_eip++;
return X86EMUL_CONTINUE;
}
static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
- unsigned long eip, void *dest, unsigned size)
+ void *dest, unsigned size)
{
int rc;
/* x86 instructions are limited to 15 bytes. */
- if (eip + size - ctxt->eip > 15)
+ if (unlikely(ctxt->_eip + size - ctxt->eip > 15))
return X86EMUL_UNHANDLEABLE;
while (size--) {
- rc = do_insn_fetch_byte(ctxt, eip++, dest++);
+ rc = do_insn_fetch_byte(ctxt, dest++);
if (rc != X86EMUL_CONTINUE)
return rc;
}
@@ -693,20 +701,18 @@
}
/* Fetch next part of the instruction being emulated. */
-#define insn_fetch(_type, _size, _eip) \
+#define insn_fetch(_type, _ctxt) \
({ unsigned long _x; \
- rc = do_insn_fetch(ctxt, (_eip), &_x, (_size)); \
+ rc = do_insn_fetch(_ctxt, &_x, sizeof(_type)); \
if (rc != X86EMUL_CONTINUE) \
goto done; \
- (_eip) += (_size); \
(_type)_x; \
})
-#define insn_fetch_arr(_arr, _size, _eip) \
-({ rc = do_insn_fetch(ctxt, (_eip), _arr, (_size)); \
+#define insn_fetch_arr(_arr, _size, _ctxt) \
+({ rc = do_insn_fetch(_ctxt, _arr, (_size)); \
if (rc != X86EMUL_CONTINUE) \
goto done; \
- (_eip) += (_size); \
})
/*
@@ -894,7 +900,7 @@
ctxt->modrm_rm = base_reg = (ctxt->rex_prefix & 1) << 3; /* REG.B */
}
- ctxt->modrm = insn_fetch(u8, 1, ctxt->_eip);
+ ctxt->modrm = insn_fetch(u8, ctxt);
ctxt->modrm_mod |= (ctxt->modrm & 0xc0) >> 6;
ctxt->modrm_reg |= (ctxt->modrm & 0x38) >> 3;
ctxt->modrm_rm |= (ctxt->modrm & 0x07);
@@ -928,13 +934,13 @@
switch (ctxt->modrm_mod) {
case 0:
if (ctxt->modrm_rm == 6)
- modrm_ea += insn_fetch(u16, 2, ctxt->_eip);
+ modrm_ea += insn_fetch(u16, ctxt);
break;
case 1:
- modrm_ea += insn_fetch(s8, 1, ctxt->_eip);
+ modrm_ea += insn_fetch(s8, ctxt);
break;
case 2:
- modrm_ea += insn_fetch(u16, 2, ctxt->_eip);
+ modrm_ea += insn_fetch(u16, ctxt);
break;
}
switch (ctxt->modrm_rm) {
@@ -971,13 +977,13 @@
} else {
/* 32/64-bit ModR/M decode. */
if ((ctxt->modrm_rm & 7) == 4) {
- sib = insn_fetch(u8, 1, ctxt->_eip);
+ sib = insn_fetch(u8, ctxt);
index_reg |= (sib >> 3) & 7;
base_reg |= sib & 7;
scale = sib >> 6;
if ((base_reg & 7) == 5 && ctxt->modrm_mod == 0)
- modrm_ea += insn_fetch(s32, 4, ctxt->_eip);
+ modrm_ea += insn_fetch(s32, ctxt);
else
modrm_ea += ctxt->regs[base_reg];
if (index_reg != 4)
@@ -990,13 +996,13 @@
switch (ctxt->modrm_mod) {
case 0:
if (ctxt->modrm_rm == 5)
- modrm_ea += insn_fetch(s32, 4, ctxt->_eip);
+ modrm_ea += insn_fetch(s32, ctxt);
break;
case 1:
- modrm_ea += insn_fetch(s8, 1, ctxt->_eip);
+ modrm_ea += insn_fetch(s8, ctxt);
break;
case 2:
- modrm_ea += insn_fetch(s32, 4, ctxt->_eip);
+ modrm_ea += insn_fetch(s32, ctxt);
break;
}
}
@@ -1013,13 +1019,13 @@
op->type = OP_MEM;
switch (ctxt->ad_bytes) {
case 2:
- op->addr.mem.ea = insn_fetch(u16, 2, ctxt->_eip);
+ op->addr.mem.ea = insn_fetch(u16, ctxt);
break;
case 4:
- op->addr.mem.ea = insn_fetch(u32, 4, ctxt->_eip);
+ op->addr.mem.ea = insn_fetch(u32, ctxt);
break;
case 8:
- op->addr.mem.ea = insn_fetch(u64, 8, ctxt->_eip);
+ op->addr.mem.ea = insn_fetch(u64, ctxt);
break;
}
done:
@@ -1452,15 +1458,18 @@
return emulate_popf(ctxt, &ctxt->dst.val, ctxt->op_bytes);
}
-static int emulate_push_sreg(struct x86_emulate_ctxt *ctxt, int seg)
+static int em_push_sreg(struct x86_emulate_ctxt *ctxt)
{
+ int seg = ctxt->src2.val;
+
ctxt->src.val = get_segment_selector(ctxt, seg);
return em_push(ctxt);
}
-static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt, int seg)
+static int em_pop_sreg(struct x86_emulate_ctxt *ctxt)
{
+ int seg = ctxt->src2.val;
unsigned long selector;
int rc;
@@ -1674,64 +1683,74 @@
{
switch (ctxt->modrm_reg) {
case 0: /* rol */
- emulate_2op_SrcB("rol", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcB(ctxt, "rol");
break;
case 1: /* ror */
- emulate_2op_SrcB("ror", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcB(ctxt, "ror");
break;
case 2: /* rcl */
- emulate_2op_SrcB("rcl", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcB(ctxt, "rcl");
break;
case 3: /* rcr */
- emulate_2op_SrcB("rcr", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcB(ctxt, "rcr");
break;
case 4: /* sal/shl */
case 6: /* sal/shl */
- emulate_2op_SrcB("sal", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcB(ctxt, "sal");
break;
case 5: /* shr */
- emulate_2op_SrcB("shr", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcB(ctxt, "shr");
break;
case 7: /* sar */
- emulate_2op_SrcB("sar", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcB(ctxt, "sar");
break;
}
return X86EMUL_CONTINUE;
}
-static int em_grp3(struct x86_emulate_ctxt *ctxt)
+static int em_not(struct x86_emulate_ctxt *ctxt)
{
- unsigned long *rax = &ctxt->regs[VCPU_REGS_RAX];
- unsigned long *rdx = &ctxt->regs[VCPU_REGS_RDX];
+ ctxt->dst.val = ~ctxt->dst.val;
+ return X86EMUL_CONTINUE;
+}
+
+static int em_neg(struct x86_emulate_ctxt *ctxt)
+{
+ emulate_1op(ctxt, "neg");
+ return X86EMUL_CONTINUE;
+}
+
+static int em_mul_ex(struct x86_emulate_ctxt *ctxt)
+{
+ u8 ex = 0;
+
+ emulate_1op_rax_rdx(ctxt, "mul", ex);
+ return X86EMUL_CONTINUE;
+}
+
+static int em_imul_ex(struct x86_emulate_ctxt *ctxt)
+{
+ u8 ex = 0;
+
+ emulate_1op_rax_rdx(ctxt, "imul", ex);
+ return X86EMUL_CONTINUE;
+}
+
+static int em_div_ex(struct x86_emulate_ctxt *ctxt)
+{
u8 de = 0;
- switch (ctxt->modrm_reg) {
- case 0 ... 1: /* test */
- emulate_2op_SrcV("test", ctxt->src, ctxt->dst, ctxt->eflags);
- break;
- case 2: /* not */
- ctxt->dst.val = ~ctxt->dst.val;
- break;
- case 3: /* neg */
- emulate_1op("neg", ctxt->dst, ctxt->eflags);
- break;
- case 4: /* mul */
- emulate_1op_rax_rdx("mul", ctxt->src, *rax, *rdx, ctxt->eflags);
- break;
- case 5: /* imul */
- emulate_1op_rax_rdx("imul", ctxt->src, *rax, *rdx, ctxt->eflags);
- break;
- case 6: /* div */
- emulate_1op_rax_rdx_ex("div", ctxt->src, *rax, *rdx,
- ctxt->eflags, de);
- break;
- case 7: /* idiv */
- emulate_1op_rax_rdx_ex("idiv", ctxt->src, *rax, *rdx,
- ctxt->eflags, de);
- break;
- default:
- return X86EMUL_UNHANDLEABLE;
- }
+ emulate_1op_rax_rdx(ctxt, "div", de);
+ if (de)
+ return emulate_de(ctxt);
+ return X86EMUL_CONTINUE;
+}
+
+static int em_idiv_ex(struct x86_emulate_ctxt *ctxt)
+{
+ u8 de = 0;
+
+ emulate_1op_rax_rdx(ctxt, "idiv", de);
if (de)
return emulate_de(ctxt);
return X86EMUL_CONTINUE;
@@ -1743,10 +1762,10 @@
switch (ctxt->modrm_reg) {
case 0: /* inc */
- emulate_1op("inc", ctxt->dst, ctxt->eflags);
+ emulate_1op(ctxt, "inc");
break;
case 1: /* dec */
- emulate_1op("dec", ctxt->dst, ctxt->eflags);
+ emulate_1op(ctxt, "dec");
break;
case 2: /* call near abs */ {
long int old_eip;
@@ -1812,8 +1831,9 @@
return rc;
}
-static int emulate_load_segment(struct x86_emulate_ctxt *ctxt, int seg)
+static int em_lseg(struct x86_emulate_ctxt *ctxt)
{
+ int seg = ctxt->src2.val;
unsigned short sel;
int rc;
@@ -2452,7 +2472,7 @@
ctxt->src.type = OP_IMM;
ctxt->src.val = 0;
ctxt->src.bytes = 1;
- emulate_2op_SrcV("or", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "or");
ctxt->eflags &= ~(X86_EFLAGS_AF | X86_EFLAGS_CF);
if (cf)
ctxt->eflags |= X86_EFLAGS_CF;
@@ -2502,49 +2522,49 @@
static int em_add(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("add", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "add");
return X86EMUL_CONTINUE;
}
static int em_or(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("or", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "or");
return X86EMUL_CONTINUE;
}
static int em_adc(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("adc", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "adc");
return X86EMUL_CONTINUE;
}
static int em_sbb(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("sbb", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "sbb");
return X86EMUL_CONTINUE;
}
static int em_and(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("and", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "and");
return X86EMUL_CONTINUE;
}
static int em_sub(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("sub", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "sub");
return X86EMUL_CONTINUE;
}
static int em_xor(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("xor", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "xor");
return X86EMUL_CONTINUE;
}
static int em_cmp(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("cmp", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "cmp");
/* Disable writeback. */
ctxt->dst.type = OP_NONE;
return X86EMUL_CONTINUE;
@@ -2552,7 +2572,9 @@
static int em_test(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV("test", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "test");
+ /* Disable writeback. */
+ ctxt->dst.type = OP_NONE;
return X86EMUL_CONTINUE;
}
@@ -2570,7 +2592,7 @@
static int em_imul(struct x86_emulate_ctxt *ctxt)
{
- emulate_2op_SrcV_nobyte("imul", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV_nobyte(ctxt, "imul");
return X86EMUL_CONTINUE;
}
@@ -3025,9 +3047,14 @@
};
static struct opcode group3[] = {
- D(DstMem | SrcImm | ModRM), D(DstMem | SrcImm | ModRM),
- D(DstMem | SrcNone | ModRM | Lock), D(DstMem | SrcNone | ModRM | Lock),
- X4(D(SrcMem | ModRM)),
+ I(DstMem | SrcImm | ModRM, em_test),
+ I(DstMem | SrcImm | ModRM, em_test),
+ I(DstMem | SrcNone | ModRM | Lock, em_not),
+ I(DstMem | SrcNone | ModRM | Lock, em_neg),
+ I(SrcMem | ModRM, em_mul_ex),
+ I(SrcMem | ModRM, em_imul_ex),
+ I(SrcMem | ModRM, em_div_ex),
+ I(SrcMem | ModRM, em_idiv_ex),
};
static struct opcode group4[] = {
@@ -3090,16 +3117,20 @@
static struct opcode opcode_table[256] = {
/* 0x00 - 0x07 */
I6ALU(Lock, em_add),
- D(ImplicitOps | Stack | No64), D(ImplicitOps | Stack | No64),
+ I(ImplicitOps | Stack | No64 | Src2ES, em_push_sreg),
+ I(ImplicitOps | Stack | No64 | Src2ES, em_pop_sreg),
/* 0x08 - 0x0F */
I6ALU(Lock, em_or),
- D(ImplicitOps | Stack | No64), N,
+ I(ImplicitOps | Stack | No64 | Src2CS, em_push_sreg),
+ N,
/* 0x10 - 0x17 */
I6ALU(Lock, em_adc),
- D(ImplicitOps | Stack | No64), D(ImplicitOps | Stack | No64),
+ I(ImplicitOps | Stack | No64 | Src2SS, em_push_sreg),
+ I(ImplicitOps | Stack | No64 | Src2SS, em_pop_sreg),
/* 0x18 - 0x1F */
I6ALU(Lock, em_sbb),
- D(ImplicitOps | Stack | No64), D(ImplicitOps | Stack | No64),
+ I(ImplicitOps | Stack | No64 | Src2DS, em_push_sreg),
+ I(ImplicitOps | Stack | No64 | Src2DS, em_pop_sreg),
/* 0x20 - 0x27 */
I6ALU(Lock, em_and), N, N,
/* 0x28 - 0x2F */
@@ -3167,7 +3198,8 @@
D2bv(DstMem | SrcImmByte | ModRM),
I(ImplicitOps | Stack | SrcImmU16, em_ret_near_imm),
I(ImplicitOps | Stack, em_ret),
- D(DstReg | SrcMemFAddr | ModRM | No64), D(DstReg | SrcMemFAddr | ModRM | No64),
+ I(DstReg | SrcMemFAddr | ModRM | No64 | Src2ES, em_lseg),
+ I(DstReg | SrcMemFAddr | ModRM | No64 | Src2DS, em_lseg),
G(ByteOp, group11), G(0, group11),
/* 0xC8 - 0xCF */
N, N, N, I(ImplicitOps | Stack, em_ret_far),
@@ -3242,20 +3274,22 @@
/* 0x90 - 0x9F */
X16(D(ByteOp | DstMem | SrcNone | ModRM| Mov)),
/* 0xA0 - 0xA7 */
- D(ImplicitOps | Stack), D(ImplicitOps | Stack),
+ I(Stack | Src2FS, em_push_sreg), I(Stack | Src2FS, em_pop_sreg),
DI(ImplicitOps, cpuid), D(DstMem | SrcReg | ModRM | BitOp),
D(DstMem | SrcReg | Src2ImmByte | ModRM),
D(DstMem | SrcReg | Src2CL | ModRM), N, N,
/* 0xA8 - 0xAF */
- D(ImplicitOps | Stack), D(ImplicitOps | Stack),
+ I(Stack | Src2GS, em_push_sreg), I(Stack | Src2GS, em_pop_sreg),
DI(ImplicitOps, rsm), D(DstMem | SrcReg | ModRM | BitOp | Lock),
D(DstMem | SrcReg | Src2ImmByte | ModRM),
D(DstMem | SrcReg | Src2CL | ModRM),
D(ModRM), I(DstReg | SrcMem | ModRM, em_imul),
/* 0xB0 - 0xB7 */
D2bv(DstMem | SrcReg | ModRM | Lock),
- D(DstReg | SrcMemFAddr | ModRM), D(DstMem | SrcReg | ModRM | BitOp | Lock),
- D(DstReg | SrcMemFAddr | ModRM), D(DstReg | SrcMemFAddr | ModRM),
+ I(DstReg | SrcMemFAddr | ModRM | Src2SS, em_lseg),
+ D(DstMem | SrcReg | ModRM | BitOp | Lock),
+ I(DstReg | SrcMemFAddr | ModRM | Src2FS, em_lseg),
+ I(DstReg | SrcMemFAddr | ModRM | Src2GS, em_lseg),
D(ByteOp | DstReg | SrcMem | ModRM | Mov), D(DstReg | SrcMem16 | ModRM | Mov),
/* 0xB8 - 0xBF */
N, N,
@@ -3309,13 +3343,13 @@
/* NB. Immediates are sign-extended as necessary. */
switch (op->bytes) {
case 1:
- op->val = insn_fetch(s8, 1, ctxt->_eip);
+ op->val = insn_fetch(s8, ctxt);
break;
case 2:
- op->val = insn_fetch(s16, 2, ctxt->_eip);
+ op->val = insn_fetch(s16, ctxt);
break;
case 4:
- op->val = insn_fetch(s32, 4, ctxt->_eip);
+ op->val = insn_fetch(s32, ctxt);
break;
}
if (!sign_extension) {
@@ -3335,6 +3369,125 @@
return rc;
}
+static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
+ unsigned d)
+{
+ int rc = X86EMUL_CONTINUE;
+
+ switch (d) {
+ case OpReg:
+ decode_register_operand(ctxt, op,
+ op == &ctxt->dst &&
+ ctxt->twobyte && (ctxt->b == 0xb6 || ctxt->b == 0xb7));
+ break;
+ case OpImmUByte:
+ rc = decode_imm(ctxt, op, 1, false);
+ break;
+ case OpMem:
+ ctxt->memop.bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
+ mem_common:
+ *op = ctxt->memop;
+ ctxt->memopp = op;
+ if ((ctxt->d & BitOp) && op == &ctxt->dst)
+ fetch_bit_operand(ctxt);
+ op->orig_val = op->val;
+ break;
+ case OpMem64:
+ ctxt->memop.bytes = 8;
+ goto mem_common;
+ case OpAcc:
+ op->type = OP_REG;
+ op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
+ op->addr.reg = &ctxt->regs[VCPU_REGS_RAX];
+ fetch_register_operand(op);
+ op->orig_val = op->val;
+ break;
+ case OpDI:
+ op->type = OP_MEM;
+ op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
+ op->addr.mem.ea =
+ register_address(ctxt, ctxt->regs[VCPU_REGS_RDI]);
+ op->addr.mem.seg = VCPU_SREG_ES;
+ op->val = 0;
+ break;
+ case OpDX:
+ op->type = OP_REG;
+ op->bytes = 2;
+ op->addr.reg = &ctxt->regs[VCPU_REGS_RDX];
+ fetch_register_operand(op);
+ break;
+ case OpCL:
+ op->bytes = 1;
+ op->val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
+ break;
+ case OpImmByte:
+ rc = decode_imm(ctxt, op, 1, true);
+ break;
+ case OpOne:
+ op->bytes = 1;
+ op->val = 1;
+ break;
+ case OpImm:
+ rc = decode_imm(ctxt, op, imm_size(ctxt), true);
+ break;
+ case OpMem16:
+ ctxt->memop.bytes = 2;
+ goto mem_common;
+ case OpMem32:
+ ctxt->memop.bytes = 4;
+ goto mem_common;
+ case OpImmU16:
+ rc = decode_imm(ctxt, op, 2, false);
+ break;
+ case OpImmU:
+ rc = decode_imm(ctxt, op, imm_size(ctxt), false);
+ break;
+ case OpSI:
+ op->type = OP_MEM;
+ op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
+ op->addr.mem.ea =
+ register_address(ctxt, ctxt->regs[VCPU_REGS_RSI]);
+ op->addr.mem.seg = seg_override(ctxt);
+ op->val = 0;
+ break;
+ case OpImmFAddr:
+ op->type = OP_IMM;
+ op->addr.mem.ea = ctxt->_eip;
+ op->bytes = ctxt->op_bytes + 2;
+ insn_fetch_arr(op->valptr, op->bytes, ctxt);
+ break;
+ case OpMemFAddr:
+ ctxt->memop.bytes = ctxt->op_bytes + 2;
+ goto mem_common;
+ case OpES:
+ op->val = VCPU_SREG_ES;
+ break;
+ case OpCS:
+ op->val = VCPU_SREG_CS;
+ break;
+ case OpSS:
+ op->val = VCPU_SREG_SS;
+ break;
+ case OpDS:
+ op->val = VCPU_SREG_DS;
+ break;
+ case OpFS:
+ op->val = VCPU_SREG_FS;
+ break;
+ case OpGS:
+ op->val = VCPU_SREG_GS;
+ break;
+ case OpImplicit:
+ /* Special instructions do their own operand decoding. */
+ default:
+ op->type = OP_NONE; /* Disable writeback. */
+ break;
+ }
+
+done:
+ return rc;
+}
+
int x86_decode_insn(struct x86_emulate_ctxt *ctxt, void *insn, int insn_len)
{
int rc = X86EMUL_CONTINUE;
@@ -3342,8 +3495,9 @@
int def_op_bytes, def_ad_bytes, goffset, simd_prefix;
bool op_prefix = false;
struct opcode opcode;
- struct operand memop = { .type = OP_NONE }, *memopp = NULL;
+ ctxt->memop.type = OP_NONE;
+ ctxt->memopp = NULL;
ctxt->_eip = ctxt->eip;
ctxt->fetch.start = ctxt->_eip;
ctxt->fetch.end = ctxt->fetch.start + insn_len;
@@ -3366,7 +3520,7 @@
break;
#endif
default:
- return -1;
+ return EMULATION_FAILED;
}
ctxt->op_bytes = def_op_bytes;
@@ -3374,7 +3528,7 @@
/* Legacy prefixes. */
for (;;) {
- switch (ctxt->b = insn_fetch(u8, 1, ctxt->_eip)) {
+ switch (ctxt->b = insn_fetch(u8, ctxt)) {
case 0x66: /* operand-size override */
op_prefix = true;
/* switch between 2/4 bytes */
@@ -3430,7 +3584,7 @@
/* Two-byte opcode? */
if (ctxt->b == 0x0f) {
ctxt->twobyte = 1;
- ctxt->b = insn_fetch(u8, 1, ctxt->_eip);
+ ctxt->b = insn_fetch(u8, ctxt);
opcode = twobyte_table[ctxt->b];
}
ctxt->d = opcode.flags;
@@ -3438,13 +3592,13 @@
while (ctxt->d & GroupMask) {
switch (ctxt->d & GroupMask) {
case Group:
- ctxt->modrm = insn_fetch(u8, 1, ctxt->_eip);
+ ctxt->modrm = insn_fetch(u8, ctxt);
--ctxt->_eip;
goffset = (ctxt->modrm >> 3) & 7;
opcode = opcode.u.group[goffset];
break;
case GroupDual:
- ctxt->modrm = insn_fetch(u8, 1, ctxt->_eip);
+ ctxt->modrm = insn_fetch(u8, ctxt);
--ctxt->_eip;
goffset = (ctxt->modrm >> 3) & 7;
if ((ctxt->modrm >> 6) == 3)
@@ -3458,7 +3612,7 @@
break;
case Prefix:
if (ctxt->rep_prefix && op_prefix)
- return X86EMUL_UNHANDLEABLE;
+ return EMULATION_FAILED;
simd_prefix = op_prefix ? 0x66 : ctxt->rep_prefix;
switch (simd_prefix) {
case 0x00: opcode = opcode.u.gprefix->pfx_no; break;
@@ -3468,10 +3622,10 @@
}
break;
default:
- return X86EMUL_UNHANDLEABLE;
+ return EMULATION_FAILED;
}
- ctxt->d &= ~GroupMask;
+ ctxt->d &= ~(u64)GroupMask;
ctxt->d |= opcode.flags;
}
@@ -3481,10 +3635,10 @@
/* Unrecognised? */
if (ctxt->d == 0 || (ctxt->d & Undefined))
- return -1;
+ return EMULATION_FAILED;
if (!(ctxt->d & VendorSpecific) && ctxt->only_vendor_specific_insn)
- return -1;
+ return EMULATION_FAILED;
if (mode == X86EMUL_MODE_PROT64 && (ctxt->d & Stack))
ctxt->op_bytes = 8;
@@ -3501,96 +3655,27 @@
/* ModRM and SIB bytes. */
if (ctxt->d & ModRM) {
- rc = decode_modrm(ctxt, &memop);
+ rc = decode_modrm(ctxt, &ctxt->memop);
if (!ctxt->has_seg_override)
set_seg_override(ctxt, ctxt->modrm_seg);
} else if (ctxt->d & MemAbs)
- rc = decode_abs(ctxt, &memop);
+ rc = decode_abs(ctxt, &ctxt->memop);
if (rc != X86EMUL_CONTINUE)
goto done;
if (!ctxt->has_seg_override)
set_seg_override(ctxt, VCPU_SREG_DS);
- memop.addr.mem.seg = seg_override(ctxt);
+ ctxt->memop.addr.mem.seg = seg_override(ctxt);
- if (memop.type == OP_MEM && ctxt->ad_bytes != 8)
- memop.addr.mem.ea = (u32)memop.addr.mem.ea;
+ if (ctxt->memop.type == OP_MEM && ctxt->ad_bytes != 8)
+ ctxt->memop.addr.mem.ea = (u32)ctxt->memop.addr.mem.ea;
/*
* Decode and fetch the source operand: register, memory
* or immediate.
*/
- switch (ctxt->d & SrcMask) {
- case SrcNone:
- break;
- case SrcReg:
- decode_register_operand(ctxt, &ctxt->src, 0);
- break;
- case SrcMem16:
- memop.bytes = 2;
- goto srcmem_common;
- case SrcMem32:
- memop.bytes = 4;
- goto srcmem_common;
- case SrcMem:
- memop.bytes = (ctxt->d & ByteOp) ? 1 :
- ctxt->op_bytes;
- srcmem_common:
- ctxt->src = memop;
- memopp = &ctxt->src;
- break;
- case SrcImmU16:
- rc = decode_imm(ctxt, &ctxt->src, 2, false);
- break;
- case SrcImm:
- rc = decode_imm(ctxt, &ctxt->src, imm_size(ctxt), true);
- break;
- case SrcImmU:
- rc = decode_imm(ctxt, &ctxt->src, imm_size(ctxt), false);
- break;
- case SrcImmByte:
- rc = decode_imm(ctxt, &ctxt->src, 1, true);
- break;
- case SrcImmUByte:
- rc = decode_imm(ctxt, &ctxt->src, 1, false);
- break;
- case SrcAcc:
- ctxt->src.type = OP_REG;
- ctxt->src.bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
- ctxt->src.addr.reg = &ctxt->regs[VCPU_REGS_RAX];
- fetch_register_operand(&ctxt->src);
- break;
- case SrcOne:
- ctxt->src.bytes = 1;
- ctxt->src.val = 1;
- break;
- case SrcSI:
- ctxt->src.type = OP_MEM;
- ctxt->src.bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
- ctxt->src.addr.mem.ea =
- register_address(ctxt, ctxt->regs[VCPU_REGS_RSI]);
- ctxt->src.addr.mem.seg = seg_override(ctxt);
- ctxt->src.val = 0;
- break;
- case SrcImmFAddr:
- ctxt->src.type = OP_IMM;
- ctxt->src.addr.mem.ea = ctxt->_eip;
- ctxt->src.bytes = ctxt->op_bytes + 2;
- insn_fetch_arr(ctxt->src.valptr, ctxt->src.bytes, ctxt->_eip);
- break;
- case SrcMemFAddr:
- memop.bytes = ctxt->op_bytes + 2;
- goto srcmem_common;
- break;
- case SrcDX:
- ctxt->src.type = OP_REG;
- ctxt->src.bytes = 2;
- ctxt->src.addr.reg = &ctxt->regs[VCPU_REGS_RDX];
- fetch_register_operand(&ctxt->src);
- break;
- }
-
+ rc = decode_operand(ctxt, &ctxt->src, (ctxt->d >> SrcShift) & OpMask);
if (rc != X86EMUL_CONTINUE)
goto done;
@@ -3598,85 +3683,18 @@
* Decode and fetch the second source operand: register, memory
* or immediate.
*/
- switch (ctxt->d & Src2Mask) {
- case Src2None:
- break;
- case Src2CL:
- ctxt->src2.bytes = 1;
- ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
- break;
- case Src2ImmByte:
- rc = decode_imm(ctxt, &ctxt->src2, 1, true);
- break;
- case Src2One:
- ctxt->src2.bytes = 1;
- ctxt->src2.val = 1;
- break;
- case Src2Imm:
- rc = decode_imm(ctxt, &ctxt->src2, imm_size(ctxt), true);
- break;
- }
-
+ rc = decode_operand(ctxt, &ctxt->src2, (ctxt->d >> Src2Shift) & OpMask);
if (rc != X86EMUL_CONTINUE)
goto done;
/* Decode and fetch the destination operand: register or memory. */
- switch (ctxt->d & DstMask) {
- case DstReg:
- decode_register_operand(ctxt, &ctxt->dst,
- ctxt->twobyte && (ctxt->b == 0xb6 || ctxt->b == 0xb7));
- break;
- case DstImmUByte:
- ctxt->dst.type = OP_IMM;
- ctxt->dst.addr.mem.ea = ctxt->_eip;
- ctxt->dst.bytes = 1;
- ctxt->dst.val = insn_fetch(u8, 1, ctxt->_eip);
- break;
- case DstMem:
- case DstMem64:
- ctxt->dst = memop;
- memopp = &ctxt->dst;
- if ((ctxt->d & DstMask) == DstMem64)
- ctxt->dst.bytes = 8;
- else
- ctxt->dst.bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
- if (ctxt->d & BitOp)
- fetch_bit_operand(ctxt);
- ctxt->dst.orig_val = ctxt->dst.val;
- break;
- case DstAcc:
- ctxt->dst.type = OP_REG;
- ctxt->dst.bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
- ctxt->dst.addr.reg = &ctxt->regs[VCPU_REGS_RAX];
- fetch_register_operand(&ctxt->dst);
- ctxt->dst.orig_val = ctxt->dst.val;
- break;
- case DstDI:
- ctxt->dst.type = OP_MEM;
- ctxt->dst.bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
- ctxt->dst.addr.mem.ea =
- register_address(ctxt, ctxt->regs[VCPU_REGS_RDI]);
- ctxt->dst.addr.mem.seg = VCPU_SREG_ES;
- ctxt->dst.val = 0;
- break;
- case DstDX:
- ctxt->dst.type = OP_REG;
- ctxt->dst.bytes = 2;
- ctxt->dst.addr.reg = &ctxt->regs[VCPU_REGS_RDX];
- fetch_register_operand(&ctxt->dst);
- break;
- case ImplicitOps:
- /* Special instructions do their own operand decoding. */
- default:
- ctxt->dst.type = OP_NONE; /* Disable writeback. */
- break;
- }
+ rc = decode_operand(ctxt, &ctxt->dst, (ctxt->d >> DstShift) & OpMask);
done:
- if (memopp && memopp->type == OP_MEM && ctxt->rip_relative)
- memopp->addr.mem.ea += ctxt->_eip;
+ if (ctxt->memopp && ctxt->memopp->type == OP_MEM && ctxt->rip_relative)
+ ctxt->memopp->addr.mem.ea += ctxt->_eip;
- return (rc == X86EMUL_UNHANDLEABLE) ? EMULATION_FAILED : EMULATION_OK;
+ return (rc != X86EMUL_CONTINUE) ? EMULATION_FAILED : EMULATION_OK;
}
static bool string_insn_completed(struct x86_emulate_ctxt *ctxt)
@@ -3825,32 +3843,11 @@
goto twobyte_insn;
switch (ctxt->b) {
- case 0x06: /* push es */
- rc = emulate_push_sreg(ctxt, VCPU_SREG_ES);
- break;
- case 0x07: /* pop es */
- rc = emulate_pop_sreg(ctxt, VCPU_SREG_ES);
- break;
- case 0x0e: /* push cs */
- rc = emulate_push_sreg(ctxt, VCPU_SREG_CS);
- break;
- case 0x16: /* push ss */
- rc = emulate_push_sreg(ctxt, VCPU_SREG_SS);
- break;
- case 0x17: /* pop ss */
- rc = emulate_pop_sreg(ctxt, VCPU_SREG_SS);
- break;
- case 0x1e: /* push ds */
- rc = emulate_push_sreg(ctxt, VCPU_SREG_DS);
- break;
- case 0x1f: /* pop ds */
- rc = emulate_pop_sreg(ctxt, VCPU_SREG_DS);
- break;
case 0x40 ... 0x47: /* inc r16/r32 */
- emulate_1op("inc", ctxt->dst, ctxt->eflags);
+ emulate_1op(ctxt, "inc");
break;
case 0x48 ... 0x4f: /* dec r16/r32 */
- emulate_1op("dec", ctxt->dst, ctxt->eflags);
+ emulate_1op(ctxt, "dec");
break;
case 0x63: /* movsxd */
if (ctxt->mode != X86EMUL_MODE_PROT64)
@@ -3891,12 +3888,6 @@
case 0xc0 ... 0xc1:
rc = em_grp2(ctxt);
break;
- case 0xc4: /* les */
- rc = emulate_load_segment(ctxt, VCPU_SREG_ES);
- break;
- case 0xc5: /* lds */
- rc = emulate_load_segment(ctxt, VCPU_SREG_DS);
- break;
case 0xcc: /* int3 */
rc = emulate_int(ctxt, 3);
break;
@@ -3953,9 +3944,6 @@
/* complement carry flag from eflags reg */
ctxt->eflags ^= EFLG_CF;
break;
- case 0xf6 ... 0xf7: /* Grp3 */
- rc = em_grp3(ctxt);
- break;
case 0xf8: /* clc */
ctxt->eflags &= ~EFLG_CF;
break;
@@ -4103,36 +4091,24 @@
case 0x90 ... 0x9f: /* setcc r/m8 */
ctxt->dst.val = test_cc(ctxt->b, ctxt->eflags);
break;
- case 0xa0: /* push fs */
- rc = emulate_push_sreg(ctxt, VCPU_SREG_FS);
- break;
- case 0xa1: /* pop fs */
- rc = emulate_pop_sreg(ctxt, VCPU_SREG_FS);
- break;
case 0xa3:
bt: /* bt */
ctxt->dst.type = OP_NONE;
/* only subword offset */
ctxt->src.val &= (ctxt->dst.bytes << 3) - 1;
- emulate_2op_SrcV_nobyte("bt", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV_nobyte(ctxt, "bt");
break;
case 0xa4: /* shld imm8, r, r/m */
case 0xa5: /* shld cl, r, r/m */
- emulate_2op_cl("shld", ctxt->src2, ctxt->src, ctxt->dst, ctxt->eflags);
- break;
- case 0xa8: /* push gs */
- rc = emulate_push_sreg(ctxt, VCPU_SREG_GS);
- break;
- case 0xa9: /* pop gs */
- rc = emulate_pop_sreg(ctxt, VCPU_SREG_GS);
+ emulate_2op_cl(ctxt, "shld");
break;
case 0xab:
bts: /* bts */
- emulate_2op_SrcV_nobyte("bts", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV_nobyte(ctxt, "bts");
break;
case 0xac: /* shrd imm8, r, r/m */
case 0xad: /* shrd cl, r, r/m */
- emulate_2op_cl("shrd", ctxt->src2, ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_cl(ctxt, "shrd");
break;
case 0xae: /* clflush */
break;
@@ -4143,7 +4119,7 @@
*/
ctxt->src.orig_val = ctxt->src.val;
ctxt->src.val = ctxt->regs[VCPU_REGS_RAX];
- emulate_2op_SrcV("cmp", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "cmp");
if (ctxt->eflags & EFLG_ZF) {
/* Success: write back to memory. */
ctxt->dst.val = ctxt->src.orig_val;
@@ -4153,18 +4129,9 @@
ctxt->dst.addr.reg = (unsigned long *)&ctxt->regs[VCPU_REGS_RAX];
}
break;
- case 0xb2: /* lss */
- rc = emulate_load_segment(ctxt, VCPU_SREG_SS);
- break;
case 0xb3:
btr: /* btr */
- emulate_2op_SrcV_nobyte("btr", ctxt->src, ctxt->dst, ctxt->eflags);
- break;
- case 0xb4: /* lfs */
- rc = emulate_load_segment(ctxt, VCPU_SREG_FS);
- break;
- case 0xb5: /* lgs */
- rc = emulate_load_segment(ctxt, VCPU_SREG_GS);
+ emulate_2op_SrcV_nobyte(ctxt, "btr");
break;
case 0xb6 ... 0xb7: /* movzx */
ctxt->dst.bytes = ctxt->op_bytes;
@@ -4185,7 +4152,7 @@
break;
case 0xbb:
btc: /* btc */
- emulate_2op_SrcV_nobyte("btc", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV_nobyte(ctxt, "btc");
break;
case 0xbc: { /* bsf */
u8 zf;
@@ -4217,7 +4184,7 @@
(s16) ctxt->src.val;
break;
case 0xc0 ... 0xc1: /* xadd */
- emulate_2op_SrcV("add", ctxt->src, ctxt->dst, ctxt->eflags);
+ emulate_2op_SrcV(ctxt, "add");
/* Write back the register source. */
ctxt->src.val = ctxt->dst.orig_val;
write_register_operand(&ctxt->src);
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index efad723..76e3f1c 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -713,14 +713,16 @@
kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
kvm_iodevice_init(&pit->dev, &pit_dev_ops);
- ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, &pit->dev);
+ ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, KVM_PIT_BASE_ADDRESS,
+ KVM_PIT_MEM_LENGTH, &pit->dev);
if (ret < 0)
goto fail;
if (flags & KVM_PIT_SPEAKER_DUMMY) {
kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS,
- &pit->speaker_dev);
+ KVM_SPEAKER_BASE_ADDRESS, 4,
+ &pit->speaker_dev);
if (ret < 0)
goto fail_unregister;
}
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 19fe855..cac4746 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -34,6 +34,9 @@
#include <linux/kvm_host.h>
#include "trace.h"
+#define pr_pic_unimpl(fmt, ...) \
+ pr_err_ratelimited("kvm: pic: " fmt, ## __VA_ARGS__)
+
static void pic_irq_request(struct kvm *kvm, int level);
static void pic_lock(struct kvm_pic *s)
@@ -306,10 +309,10 @@
}
s->init_state = 1;
if (val & 0x02)
- printk(KERN_ERR "single mode not supported");
+ pr_pic_unimpl("single mode not supported");
if (val & 0x08)
- printk(KERN_ERR
- "level sensitive irq not supported");
+ pr_pic_unimpl(
+ "level sensitive irq not supported");
} else if (val & 0x08) {
if (val & 0x04)
s->poll = 1;
@@ -459,22 +462,15 @@
}
}
-static inline struct kvm_pic *to_pic(struct kvm_io_device *dev)
-{
- return container_of(dev, struct kvm_pic, dev);
-}
-
-static int picdev_write(struct kvm_io_device *this,
+static int picdev_write(struct kvm_pic *s,
gpa_t addr, int len, const void *val)
{
- struct kvm_pic *s = to_pic(this);
unsigned char data = *(unsigned char *)val;
if (!picdev_in_range(addr))
return -EOPNOTSUPP;
if (len != 1) {
- if (printk_ratelimit())
- printk(KERN_ERR "PIC: non byte write\n");
+ pr_pic_unimpl("non byte write\n");
return 0;
}
pic_lock(s);
@@ -494,17 +490,15 @@
return 0;
}
-static int picdev_read(struct kvm_io_device *this,
+static int picdev_read(struct kvm_pic *s,
gpa_t addr, int len, void *val)
{
- struct kvm_pic *s = to_pic(this);
unsigned char data = 0;
if (!picdev_in_range(addr))
return -EOPNOTSUPP;
if (len != 1) {
- if (printk_ratelimit())
- printk(KERN_ERR "PIC: non byte read\n");
+ pr_pic_unimpl("non byte read\n");
return 0;
}
pic_lock(s);
@@ -525,6 +519,48 @@
return 0;
}
+static int picdev_master_write(struct kvm_io_device *dev,
+ gpa_t addr, int len, const void *val)
+{
+ return picdev_write(container_of(dev, struct kvm_pic, dev_master),
+ addr, len, val);
+}
+
+static int picdev_master_read(struct kvm_io_device *dev,
+ gpa_t addr, int len, void *val)
+{
+ return picdev_read(container_of(dev, struct kvm_pic, dev_master),
+ addr, len, val);
+}
+
+static int picdev_slave_write(struct kvm_io_device *dev,
+ gpa_t addr, int len, const void *val)
+{
+ return picdev_write(container_of(dev, struct kvm_pic, dev_slave),
+ addr, len, val);
+}
+
+static int picdev_slave_read(struct kvm_io_device *dev,
+ gpa_t addr, int len, void *val)
+{
+ return picdev_read(container_of(dev, struct kvm_pic, dev_slave),
+ addr, len, val);
+}
+
+static int picdev_eclr_write(struct kvm_io_device *dev,
+ gpa_t addr, int len, const void *val)
+{
+ return picdev_write(container_of(dev, struct kvm_pic, dev_eclr),
+ addr, len, val);
+}
+
+static int picdev_eclr_read(struct kvm_io_device *dev,
+ gpa_t addr, int len, void *val)
+{
+ return picdev_read(container_of(dev, struct kvm_pic, dev_eclr),
+ addr, len, val);
+}
+
/*
* callback when PIC0 irq status changed
*/
@@ -537,9 +573,19 @@
s->output = level;
}
-static const struct kvm_io_device_ops picdev_ops = {
- .read = picdev_read,
- .write = picdev_write,
+static const struct kvm_io_device_ops picdev_master_ops = {
+ .read = picdev_master_read,
+ .write = picdev_master_write,
+};
+
+static const struct kvm_io_device_ops picdev_slave_ops = {
+ .read = picdev_slave_read,
+ .write = picdev_slave_write,
+};
+
+static const struct kvm_io_device_ops picdev_eclr_ops = {
+ .read = picdev_eclr_read,
+ .write = picdev_eclr_write,
};
struct kvm_pic *kvm_create_pic(struct kvm *kvm)
@@ -560,16 +606,39 @@
/*
* Initialize PIO device
*/
- kvm_iodevice_init(&s->dev, &picdev_ops);
+ kvm_iodevice_init(&s->dev_master, &picdev_master_ops);
+ kvm_iodevice_init(&s->dev_slave, &picdev_slave_ops);
+ kvm_iodevice_init(&s->dev_eclr, &picdev_eclr_ops);
mutex_lock(&kvm->slots_lock);
- ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, &s->dev);
+ ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, 0x20, 2,
+ &s->dev_master);
+ if (ret < 0)
+ goto fail_unlock;
+
+ ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, 0xa0, 2, &s->dev_slave);
+ if (ret < 0)
+ goto fail_unreg_2;
+
+ ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, 0x4d0, 2, &s->dev_eclr);
+ if (ret < 0)
+ goto fail_unreg_1;
+
mutex_unlock(&kvm->slots_lock);
- if (ret < 0) {
- kfree(s);
- return NULL;
- }
return s;
+
+fail_unreg_1:
+ kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &s->dev_slave);
+
+fail_unreg_2:
+ kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &s->dev_master);
+
+fail_unlock:
+ mutex_unlock(&kvm->slots_lock);
+
+ kfree(s);
+
+ return NULL;
}
void kvm_destroy_pic(struct kvm *kvm)
@@ -577,7 +646,9 @@
struct kvm_pic *vpic = kvm->arch.vpic;
if (vpic) {
- kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &vpic->dev);
+ kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &vpic->dev_master);
+ kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &vpic->dev_slave);
+ kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &vpic->dev_eclr);
kvm->arch.vpic = NULL;
kfree(vpic);
}
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 53e2d08..2086f2b 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -66,7 +66,9 @@
struct kvm *kvm;
struct kvm_kpic_state pics[2]; /* 0 is master pic, 1 is slave pic */
int output; /* intr from master PIC */
- struct kvm_io_device dev;
+ struct kvm_io_device dev_master;
+ struct kvm_io_device dev_slave;
+ struct kvm_io_device dev_eclr;
void (*ack_notifier)(void *opaque, int irq);
unsigned long irq_states[16];
};
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index 3377d53..544076c 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -45,13 +45,6 @@
return vcpu->arch.walk_mmu->pdptrs[index];
}
-static inline u64 kvm_pdptr_read_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, int index)
-{
- load_pdptrs(vcpu, mmu, mmu->get_cr3(vcpu));
-
- return mmu->pdptrs[index];
-}
-
static inline ulong kvm_read_cr0_bits(struct kvm_vcpu *vcpu, ulong mask)
{
ulong tmask = mask & KVM_POSSIBLE_CR0_GUEST_BITS;
diff --git a/arch/x86/kvm/kvm_timer.h b/arch/x86/kvm/kvm_timer.h
index 64bc6ea..497dbaa 100644
--- a/arch/x86/kvm/kvm_timer.h
+++ b/arch/x86/kvm/kvm_timer.h
@@ -2,6 +2,8 @@
struct kvm_timer {
struct hrtimer timer;
s64 period; /* unit: ns */
+ u32 timer_mode_mask;
+ u64 tscdeadline;
atomic_t pending; /* accumulated triggered timers */
bool reinject;
struct kvm_timer_ops *t_ops;
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 57dcbd4..54abb401 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -68,6 +68,9 @@
#define VEC_POS(v) ((v) & (32 - 1))
#define REG_POS(v) (((v) >> 5) << 4)
+static unsigned int min_timer_period_us = 500;
+module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
+
static inline u32 apic_get_reg(struct kvm_lapic *apic, int reg_off)
{
return *((u32 *) (apic->regs + reg_off));
@@ -135,9 +138,23 @@
return apic_get_reg(apic, lvt_type) & APIC_VECTOR_MASK;
}
+static inline int apic_lvtt_oneshot(struct kvm_lapic *apic)
+{
+ return ((apic_get_reg(apic, APIC_LVTT) &
+ apic->lapic_timer.timer_mode_mask) == APIC_LVT_TIMER_ONESHOT);
+}
+
static inline int apic_lvtt_period(struct kvm_lapic *apic)
{
- return apic_get_reg(apic, APIC_LVTT) & APIC_LVT_TIMER_PERIODIC;
+ return ((apic_get_reg(apic, APIC_LVTT) &
+ apic->lapic_timer.timer_mode_mask) == APIC_LVT_TIMER_PERIODIC);
+}
+
+static inline int apic_lvtt_tscdeadline(struct kvm_lapic *apic)
+{
+ return ((apic_get_reg(apic, APIC_LVTT) &
+ apic->lapic_timer.timer_mode_mask) ==
+ APIC_LVT_TIMER_TSCDEADLINE);
}
static inline int apic_lvt_nmi_mode(u32 lvt_val)
@@ -166,7 +183,7 @@
}
static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
- LVT_MASK | APIC_LVT_TIMER_PERIODIC, /* LVTT */
+ LVT_MASK , /* part LVTT mask, timer mode mask added at runtime */
LVT_MASK | APIC_MODE_MASK, /* LVTTHMR */
LVT_MASK | APIC_MODE_MASK, /* LVTPC */
LINT_MASK, LINT_MASK, /* LVT0-1 */
@@ -316,8 +333,8 @@
result = 1;
break;
default:
- printk(KERN_WARNING "Bad DFR vcpu %d: %08x\n",
- apic->vcpu->vcpu_id, apic_get_reg(apic, APIC_DFR));
+ apic_debug("Bad DFR vcpu %d: %08x\n",
+ apic->vcpu->vcpu_id, apic_get_reg(apic, APIC_DFR));
break;
}
@@ -354,8 +371,8 @@
result = (target != source);
break;
default:
- printk(KERN_WARNING "Bad dest shorthand value %x\n",
- short_hand);
+ apic_debug("kvm: apic: Bad dest shorthand value %x\n",
+ short_hand);
break;
}
@@ -401,11 +418,11 @@
break;
case APIC_DM_REMRD:
- printk(KERN_DEBUG "Ignoring delivery mode 3\n");
+ apic_debug("Ignoring delivery mode 3\n");
break;
case APIC_DM_SMI:
- printk(KERN_DEBUG "Ignoring guest SMI\n");
+ apic_debug("Ignoring guest SMI\n");
break;
case APIC_DM_NMI:
@@ -565,11 +582,13 @@
val = kvm_apic_id(apic) << 24;
break;
case APIC_ARBPRI:
- printk(KERN_WARNING "Access APIC ARBPRI register "
- "which is for P6\n");
+ apic_debug("Access APIC ARBPRI register which is for P6\n");
break;
case APIC_TMCCT: /* Timer CCR */
+ if (apic_lvtt_tscdeadline(apic))
+ return 0;
+
val = apic_get_tmcct(apic);
break;
@@ -664,29 +683,40 @@
static void start_apic_timer(struct kvm_lapic *apic)
{
- ktime_t now = apic->lapic_timer.timer.base->get_time();
-
- apic->lapic_timer.period = (u64)apic_get_reg(apic, APIC_TMICT) *
- APIC_BUS_CYCLE_NS * apic->divide_count;
+ ktime_t now;
atomic_set(&apic->lapic_timer.pending, 0);
- if (!apic->lapic_timer.period)
- return;
- /*
- * Do not allow the guest to program periodic timers with small
- * interval, since the hrtimers are not throttled by the host
- * scheduler.
- */
- if (apic_lvtt_period(apic)) {
- if (apic->lapic_timer.period < NSEC_PER_MSEC/2)
- apic->lapic_timer.period = NSEC_PER_MSEC/2;
- }
+ if (apic_lvtt_period(apic) || apic_lvtt_oneshot(apic)) {
+ /* lapic timer in oneshot or peroidic mode */
+ now = apic->lapic_timer.timer.base->get_time();
+ apic->lapic_timer.period = (u64)apic_get_reg(apic, APIC_TMICT)
+ * APIC_BUS_CYCLE_NS * apic->divide_count;
- hrtimer_start(&apic->lapic_timer.timer,
- ktime_add_ns(now, apic->lapic_timer.period),
- HRTIMER_MODE_ABS);
+ if (!apic->lapic_timer.period)
+ return;
+ /*
+ * Do not allow the guest to program periodic timers with small
+ * interval, since the hrtimers are not throttled by the host
+ * scheduler.
+ */
+ if (apic_lvtt_period(apic)) {
+ s64 min_period = min_timer_period_us * 1000LL;
- apic_debug("%s: bus cycle is %" PRId64 "ns, now 0x%016"
+ if (apic->lapic_timer.period < min_period) {
+ pr_info_ratelimited(
+ "kvm: vcpu %i: requested %lld ns "
+ "lapic timer period limited to %lld ns\n",
+ apic->vcpu->vcpu_id,
+ apic->lapic_timer.period, min_period);
+ apic->lapic_timer.period = min_period;
+ }
+ }
+
+ hrtimer_start(&apic->lapic_timer.timer,
+ ktime_add_ns(now, apic->lapic_timer.period),
+ HRTIMER_MODE_ABS);
+
+ apic_debug("%s: bus cycle is %" PRId64 "ns, now 0x%016"
PRIx64 ", "
"timer initial count 0x%x, period %lldns, "
"expire @ 0x%016" PRIx64 ".\n", __func__,
@@ -695,6 +725,30 @@
apic->lapic_timer.period,
ktime_to_ns(ktime_add_ns(now,
apic->lapic_timer.period)));
+ } else if (apic_lvtt_tscdeadline(apic)) {
+ /* lapic timer in tsc deadline mode */
+ u64 guest_tsc, tscdeadline = apic->lapic_timer.tscdeadline;
+ u64 ns = 0;
+ struct kvm_vcpu *vcpu = apic->vcpu;
+ unsigned long this_tsc_khz = vcpu_tsc_khz(vcpu);
+ unsigned long flags;
+
+ if (unlikely(!tscdeadline || !this_tsc_khz))
+ return;
+
+ local_irq_save(flags);
+
+ now = apic->lapic_timer.timer.base->get_time();
+ guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu);
+ if (likely(tscdeadline > guest_tsc)) {
+ ns = (tscdeadline - guest_tsc) * 1000000ULL;
+ do_div(ns, this_tsc_khz);
+ }
+ hrtimer_start(&apic->lapic_timer.timer,
+ ktime_add_ns(now, ns), HRTIMER_MODE_ABS);
+
+ local_irq_restore(flags);
+ }
}
static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
@@ -782,7 +836,6 @@
case APIC_LVT0:
apic_manage_nmi_watchdog(apic, val);
- case APIC_LVTT:
case APIC_LVTTHMR:
case APIC_LVTPC:
case APIC_LVT1:
@@ -796,7 +849,22 @@
break;
+ case APIC_LVTT:
+ if ((apic_get_reg(apic, APIC_LVTT) &
+ apic->lapic_timer.timer_mode_mask) !=
+ (val & apic->lapic_timer.timer_mode_mask))
+ hrtimer_cancel(&apic->lapic_timer.timer);
+
+ if (!apic_sw_enabled(apic))
+ val |= APIC_LVT_MASKED;
+ val &= (apic_lvt_mask[0] | apic->lapic_timer.timer_mode_mask);
+ apic_set_reg(apic, APIC_LVTT, val);
+ break;
+
case APIC_TMICT:
+ if (apic_lvtt_tscdeadline(apic))
+ break;
+
hrtimer_cancel(&apic->lapic_timer.timer);
apic_set_reg(apic, APIC_TMICT, val);
start_apic_timer(apic);
@@ -804,14 +872,14 @@
case APIC_TDCR:
if (val & 4)
- printk(KERN_ERR "KVM_WRITE:TDCR %x\n", val);
+ apic_debug("KVM_WRITE:TDCR %x\n", val);
apic_set_reg(apic, APIC_TDCR, val);
update_divide_count(apic);
break;
case APIC_ESR:
if (apic_x2apic_mode(apic) && val != 0) {
- printk(KERN_ERR "KVM_WRITE:ESR not zero %x\n", val);
+ apic_debug("KVM_WRITE:ESR not zero %x\n", val);
ret = 1;
}
break;
@@ -864,6 +932,15 @@
return 0;
}
+void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+
+ if (apic)
+ apic_reg_write(vcpu->arch.apic, APIC_EOI, 0);
+}
+EXPORT_SYMBOL_GPL(kvm_lapic_set_eoi);
+
void kvm_free_lapic(struct kvm_vcpu *vcpu)
{
if (!vcpu->arch.apic)
@@ -883,6 +960,32 @@
*----------------------------------------------------------------------
*/
+u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ if (!apic)
+ return 0;
+
+ if (apic_lvtt_oneshot(apic) || apic_lvtt_period(apic))
+ return 0;
+
+ return apic->lapic_timer.tscdeadline;
+}
+
+void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ if (!apic)
+ return;
+
+ if (apic_lvtt_oneshot(apic) || apic_lvtt_period(apic))
+ return;
+
+ hrtimer_cancel(&apic->lapic_timer.timer);
+ apic->lapic_timer.tscdeadline = data;
+ start_apic_timer(apic);
+}
+
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
{
struct kvm_lapic *apic = vcpu->arch.apic;
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 52c9e6b..138e8cc 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -26,6 +26,7 @@
void kvm_lapic_reset(struct kvm_vcpu *vcpu);
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
+void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu);
void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
void kvm_apic_set_version(struct kvm_vcpu *vcpu);
@@ -41,6 +42,9 @@
bool kvm_apic_present(struct kvm_vcpu *vcpu);
int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
+u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu);
+void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data);
+
void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 8e8da79..f1b36cf 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2770,7 +2770,7 @@
ASSERT(!VALID_PAGE(root));
if (vcpu->arch.mmu.root_level == PT32E_ROOT_LEVEL) {
- pdptr = kvm_pdptr_read_mmu(vcpu, &vcpu->arch.mmu, i);
+ pdptr = vcpu->arch.mmu.get_pdptr(vcpu, i);
if (!is_present_gpte(pdptr)) {
vcpu->arch.mmu.pae_root[i] = 0;
continue;
@@ -3318,6 +3318,7 @@
context->direct_map = true;
context->set_cr3 = kvm_x86_ops->set_tdp_cr3;
context->get_cr3 = get_cr3;
+ context->get_pdptr = kvm_pdptr_read;
context->inject_page_fault = kvm_inject_page_fault;
context->nx = is_nx(vcpu);
@@ -3376,6 +3377,7 @@
vcpu->arch.walk_mmu->set_cr3 = kvm_x86_ops->set_cr3;
vcpu->arch.walk_mmu->get_cr3 = get_cr3;
+ vcpu->arch.walk_mmu->get_pdptr = kvm_pdptr_read;
vcpu->arch.walk_mmu->inject_page_fault = kvm_inject_page_fault;
return r;
@@ -3386,6 +3388,7 @@
struct kvm_mmu *g_context = &vcpu->arch.nested_mmu;
g_context->get_cr3 = get_cr3;
+ g_context->get_pdptr = kvm_pdptr_read;
g_context->inject_page_fault = kvm_inject_page_fault;
/*
diff --git a/arch/x86/kvm/mmu_audit.c b/arch/x86/kvm/mmu_audit.c
index 2460a26..746ec25 100644
--- a/arch/x86/kvm/mmu_audit.c
+++ b/arch/x86/kvm/mmu_audit.c
@@ -121,16 +121,16 @@
static void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
{
+ static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10);
unsigned long *rmapp;
struct kvm_mmu_page *rev_sp;
gfn_t gfn;
-
rev_sp = page_header(__pa(sptep));
gfn = kvm_mmu_page_get_gfn(rev_sp, sptep - rev_sp->spt);
if (!gfn_to_memslot(kvm, gfn)) {
- if (!printk_ratelimit())
+ if (!__ratelimit(&ratelimit_state))
return;
audit_printk(kvm, "no memslot for gfn %llx\n", gfn);
audit_printk(kvm, "index %ld of sp (gfn=%llx)\n",
@@ -141,7 +141,7 @@
rmapp = gfn_to_rmap(kvm, gfn, rev_sp->role.level);
if (!*rmapp) {
- if (!printk_ratelimit())
+ if (!__ratelimit(&ratelimit_state))
return;
audit_printk(kvm, "no rmap for writable spte %llx\n",
*sptep);
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 507e2b8..9299410 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -147,7 +147,7 @@
gfn_t table_gfn;
unsigned index, pt_access, uninitialized_var(pte_access);
gpa_t pte_gpa;
- bool eperm;
+ bool eperm, last_gpte;
int offset;
const int write_fault = access & PFERR_WRITE_MASK;
const int user_fault = access & PFERR_USER_MASK;
@@ -163,7 +163,7 @@
#if PTTYPE == 64
if (walker->level == PT32E_ROOT_LEVEL) {
- pte = kvm_pdptr_read_mmu(vcpu, mmu, (addr >> 30) & 3);
+ pte = mmu->get_pdptr(vcpu, (addr >> 30) & 3);
trace_kvm_mmu_paging_element(pte, walker->level);
if (!is_present_gpte(pte))
goto error;
@@ -221,6 +221,17 @@
eperm = true;
#endif
+ last_gpte = FNAME(is_last_gpte)(walker, vcpu, mmu, pte);
+ if (last_gpte) {
+ pte_access = pt_access &
+ FNAME(gpte_access)(vcpu, pte, true);
+ /* check if the kernel is fetching from user page */
+ if (unlikely(pte_access & PT_USER_MASK) &&
+ kvm_read_cr4_bits(vcpu, X86_CR4_SMEP))
+ if (fetch_fault && !user_fault)
+ eperm = true;
+ }
+
if (!eperm && unlikely(!(pte & PT_ACCESSED_MASK))) {
int ret;
trace_kvm_mmu_set_accessed_bit(table_gfn, index,
@@ -238,18 +249,12 @@
walker->ptes[walker->level - 1] = pte;
- if (FNAME(is_last_gpte)(walker, vcpu, mmu, pte)) {
+ if (last_gpte) {
int lvl = walker->level;
gpa_t real_gpa;
gfn_t gfn;
u32 ac;
- /* check if the kernel is fetching from user page */
- if (unlikely(pte_access & PT_USER_MASK) &&
- kvm_read_cr4_bits(vcpu, X86_CR4_SMEP))
- if (fetch_fault && !user_fault)
- eperm = true;
-
gfn = gpte_to_gfn_lvl(pte, lvl);
gfn += (addr & PT_LVL_OFFSET_MASK(lvl)) >> PAGE_SHIFT;
@@ -295,7 +300,6 @@
walker->ptes[walker->level - 1] = pte;
}
- pte_access = pt_access & FNAME(gpte_access)(vcpu, pte, true);
walker->pt_access = pt_access;
walker->pte_access = pte_access;
pgprintk("%s: pte %llx pte_access %x pt_access %x\n",
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 475d1c9..e32243e 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1084,7 +1084,6 @@
if (npt_enabled) {
/* Setup VMCB for Nested Paging */
control->nested_ctl = 1;
- clr_intercept(svm, INTERCEPT_TASK_SWITCH);
clr_intercept(svm, INTERCEPT_INVLPG);
clr_exception_intercept(svm, PF_VECTOR);
clr_cr_intercept(svm, INTERCEPT_CR3_READ);
@@ -1844,6 +1843,20 @@
return svm->nested.nested_cr3;
}
+static u64 nested_svm_get_tdp_pdptr(struct kvm_vcpu *vcpu, int index)
+{
+ struct vcpu_svm *svm = to_svm(vcpu);
+ u64 cr3 = svm->nested.nested_cr3;
+ u64 pdpte;
+ int ret;
+
+ ret = kvm_read_guest_page(vcpu->kvm, gpa_to_gfn(cr3), &pdpte,
+ offset_in_page(cr3) + index * 8, 8);
+ if (ret)
+ return 0;
+ return pdpte;
+}
+
static void nested_svm_set_tdp_cr3(struct kvm_vcpu *vcpu,
unsigned long root)
{
@@ -1875,6 +1888,7 @@
vcpu->arch.mmu.set_cr3 = nested_svm_set_tdp_cr3;
vcpu->arch.mmu.get_cr3 = nested_svm_get_tdp_cr3;
+ vcpu->arch.mmu.get_pdptr = nested_svm_get_tdp_pdptr;
vcpu->arch.mmu.inject_page_fault = nested_svm_inject_npf_exit;
vcpu->arch.mmu.shadow_root_level = get_npt_level();
vcpu->arch.walk_mmu = &vcpu->arch.nested_mmu;
@@ -2182,7 +2196,8 @@
vmcb->control.exit_info_1,
vmcb->control.exit_info_2,
vmcb->control.exit_int_info,
- vmcb->control.exit_int_info_err);
+ vmcb->control.exit_int_info_err,
+ KVM_ISA_SVM);
nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, &page);
if (!nested_vmcb)
@@ -2894,15 +2909,20 @@
return 0;
}
+u64 svm_read_l1_tsc(struct kvm_vcpu *vcpu)
+{
+ struct vmcb *vmcb = get_host_vmcb(to_svm(vcpu));
+ return vmcb->control.tsc_offset +
+ svm_scale_tsc(vcpu, native_read_tsc());
+}
+
static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
{
struct vcpu_svm *svm = to_svm(vcpu);
switch (ecx) {
case MSR_IA32_TSC: {
- struct vmcb *vmcb = get_host_vmcb(svm);
-
- *data = vmcb->control.tsc_offset +
+ *data = svm->vmcb->control.tsc_offset +
svm_scale_tsc(vcpu, native_read_tsc());
break;
@@ -3314,8 +3334,6 @@
struct kvm_run *kvm_run = vcpu->run;
u32 exit_code = svm->vmcb->control.exit_code;
- trace_kvm_exit(exit_code, vcpu, KVM_ISA_SVM);
-
if (!is_cr_intercept(svm, INTERCEPT_CR0_WRITE))
vcpu->arch.cr0 = svm->vmcb->save.cr0;
if (npt_enabled)
@@ -3335,7 +3353,8 @@
svm->vmcb->control.exit_info_1,
svm->vmcb->control.exit_info_2,
svm->vmcb->control.exit_int_info,
- svm->vmcb->control.exit_int_info_err);
+ svm->vmcb->control.exit_int_info_err,
+ KVM_ISA_SVM);
vmexit = nested_svm_exit_special(svm);
@@ -3768,6 +3787,8 @@
vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
+ trace_kvm_exit(svm->vmcb->control.exit_code, vcpu, KVM_ISA_SVM);
+
if (unlikely(svm->vmcb->control.exit_code == SVM_EXIT_NMI))
kvm_before_handle_nmi(&svm->vcpu);
@@ -3897,60 +3918,6 @@
}
}
-static const struct trace_print_flags svm_exit_reasons_str[] = {
- { SVM_EXIT_READ_CR0, "read_cr0" },
- { SVM_EXIT_READ_CR3, "read_cr3" },
- { SVM_EXIT_READ_CR4, "read_cr4" },
- { SVM_EXIT_READ_CR8, "read_cr8" },
- { SVM_EXIT_WRITE_CR0, "write_cr0" },
- { SVM_EXIT_WRITE_CR3, "write_cr3" },
- { SVM_EXIT_WRITE_CR4, "write_cr4" },
- { SVM_EXIT_WRITE_CR8, "write_cr8" },
- { SVM_EXIT_READ_DR0, "read_dr0" },
- { SVM_EXIT_READ_DR1, "read_dr1" },
- { SVM_EXIT_READ_DR2, "read_dr2" },
- { SVM_EXIT_READ_DR3, "read_dr3" },
- { SVM_EXIT_WRITE_DR0, "write_dr0" },
- { SVM_EXIT_WRITE_DR1, "write_dr1" },
- { SVM_EXIT_WRITE_DR2, "write_dr2" },
- { SVM_EXIT_WRITE_DR3, "write_dr3" },
- { SVM_EXIT_WRITE_DR5, "write_dr5" },
- { SVM_EXIT_WRITE_DR7, "write_dr7" },
- { SVM_EXIT_EXCP_BASE + DB_VECTOR, "DB excp" },
- { SVM_EXIT_EXCP_BASE + BP_VECTOR, "BP excp" },
- { SVM_EXIT_EXCP_BASE + UD_VECTOR, "UD excp" },
- { SVM_EXIT_EXCP_BASE + PF_VECTOR, "PF excp" },
- { SVM_EXIT_EXCP_BASE + NM_VECTOR, "NM excp" },
- { SVM_EXIT_EXCP_BASE + MC_VECTOR, "MC excp" },
- { SVM_EXIT_INTR, "interrupt" },
- { SVM_EXIT_NMI, "nmi" },
- { SVM_EXIT_SMI, "smi" },
- { SVM_EXIT_INIT, "init" },
- { SVM_EXIT_VINTR, "vintr" },
- { SVM_EXIT_CPUID, "cpuid" },
- { SVM_EXIT_INVD, "invd" },
- { SVM_EXIT_HLT, "hlt" },
- { SVM_EXIT_INVLPG, "invlpg" },
- { SVM_EXIT_INVLPGA, "invlpga" },
- { SVM_EXIT_IOIO, "io" },
- { SVM_EXIT_MSR, "msr" },
- { SVM_EXIT_TASK_SWITCH, "task_switch" },
- { SVM_EXIT_SHUTDOWN, "shutdown" },
- { SVM_EXIT_VMRUN, "vmrun" },
- { SVM_EXIT_VMMCALL, "hypercall" },
- { SVM_EXIT_VMLOAD, "vmload" },
- { SVM_EXIT_VMSAVE, "vmsave" },
- { SVM_EXIT_STGI, "stgi" },
- { SVM_EXIT_CLGI, "clgi" },
- { SVM_EXIT_SKINIT, "skinit" },
- { SVM_EXIT_WBINVD, "wbinvd" },
- { SVM_EXIT_MONITOR, "monitor" },
- { SVM_EXIT_MWAIT, "mwait" },
- { SVM_EXIT_XSETBV, "xsetbv" },
- { SVM_EXIT_NPF, "npf" },
- { -1, NULL }
-};
-
static int svm_get_lpage_level(void)
{
return PT_PDPE_LEVEL;
@@ -4223,7 +4190,6 @@
.get_mt_mask = svm_get_mt_mask,
.get_exit_info = svm_get_exit_info,
- .exit_reasons_str = svm_exit_reasons_str,
.get_lpage_level = svm_get_lpage_level,
@@ -4239,6 +4205,7 @@
.write_tsc_offset = svm_write_tsc_offset,
.adjust_tsc_offset = svm_adjust_tsc_offset,
.compute_tsc_offset = svm_compute_tsc_offset,
+ .read_l1_tsc = svm_read_l1_tsc,
.set_tdp_cr3 = set_tdp_cr3,
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 3ff898c..911d264 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -2,6 +2,8 @@
#define _TRACE_KVM_H
#include <linux/tracepoint.h>
+#include <asm/vmx.h>
+#include <asm/svm.h>
#undef TRACE_SYSTEM
#define TRACE_SYSTEM kvm
@@ -181,6 +183,95 @@
#define KVM_ISA_VMX 1
#define KVM_ISA_SVM 2
+#define VMX_EXIT_REASONS \
+ { EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \
+ { EXIT_REASON_EXTERNAL_INTERRUPT, "EXTERNAL_INTERRUPT" }, \
+ { EXIT_REASON_TRIPLE_FAULT, "TRIPLE_FAULT" }, \
+ { EXIT_REASON_PENDING_INTERRUPT, "PENDING_INTERRUPT" }, \
+ { EXIT_REASON_NMI_WINDOW, "NMI_WINDOW" }, \
+ { EXIT_REASON_TASK_SWITCH, "TASK_SWITCH" }, \
+ { EXIT_REASON_CPUID, "CPUID" }, \
+ { EXIT_REASON_HLT, "HLT" }, \
+ { EXIT_REASON_INVLPG, "INVLPG" }, \
+ { EXIT_REASON_RDPMC, "RDPMC" }, \
+ { EXIT_REASON_RDTSC, "RDTSC" }, \
+ { EXIT_REASON_VMCALL, "VMCALL" }, \
+ { EXIT_REASON_VMCLEAR, "VMCLEAR" }, \
+ { EXIT_REASON_VMLAUNCH, "VMLAUNCH" }, \
+ { EXIT_REASON_VMPTRLD, "VMPTRLD" }, \
+ { EXIT_REASON_VMPTRST, "VMPTRST" }, \
+ { EXIT_REASON_VMREAD, "VMREAD" }, \
+ { EXIT_REASON_VMRESUME, "VMRESUME" }, \
+ { EXIT_REASON_VMWRITE, "VMWRITE" }, \
+ { EXIT_REASON_VMOFF, "VMOFF" }, \
+ { EXIT_REASON_VMON, "VMON" }, \
+ { EXIT_REASON_CR_ACCESS, "CR_ACCESS" }, \
+ { EXIT_REASON_DR_ACCESS, "DR_ACCESS" }, \
+ { EXIT_REASON_IO_INSTRUCTION, "IO_INSTRUCTION" }, \
+ { EXIT_REASON_MSR_READ, "MSR_READ" }, \
+ { EXIT_REASON_MSR_WRITE, "MSR_WRITE" }, \
+ { EXIT_REASON_MWAIT_INSTRUCTION, "MWAIT_INSTRUCTION" }, \
+ { EXIT_REASON_MONITOR_INSTRUCTION, "MONITOR_INSTRUCTION" }, \
+ { EXIT_REASON_PAUSE_INSTRUCTION, "PAUSE_INSTRUCTION" }, \
+ { EXIT_REASON_MCE_DURING_VMENTRY, "MCE_DURING_VMENTRY" }, \
+ { EXIT_REASON_TPR_BELOW_THRESHOLD, "TPR_BELOW_THRESHOLD" }, \
+ { EXIT_REASON_APIC_ACCESS, "APIC_ACCESS" }, \
+ { EXIT_REASON_EPT_VIOLATION, "EPT_VIOLATION" }, \
+ { EXIT_REASON_EPT_MISCONFIG, "EPT_MISCONFIG" }, \
+ { EXIT_REASON_WBINVD, "WBINVD" }
+
+#define SVM_EXIT_REASONS \
+ { SVM_EXIT_READ_CR0, "read_cr0" }, \
+ { SVM_EXIT_READ_CR3, "read_cr3" }, \
+ { SVM_EXIT_READ_CR4, "read_cr4" }, \
+ { SVM_EXIT_READ_CR8, "read_cr8" }, \
+ { SVM_EXIT_WRITE_CR0, "write_cr0" }, \
+ { SVM_EXIT_WRITE_CR3, "write_cr3" }, \
+ { SVM_EXIT_WRITE_CR4, "write_cr4" }, \
+ { SVM_EXIT_WRITE_CR8, "write_cr8" }, \
+ { SVM_EXIT_READ_DR0, "read_dr0" }, \
+ { SVM_EXIT_READ_DR1, "read_dr1" }, \
+ { SVM_EXIT_READ_DR2, "read_dr2" }, \
+ { SVM_EXIT_READ_DR3, "read_dr3" }, \
+ { SVM_EXIT_WRITE_DR0, "write_dr0" }, \
+ { SVM_EXIT_WRITE_DR1, "write_dr1" }, \
+ { SVM_EXIT_WRITE_DR2, "write_dr2" }, \
+ { SVM_EXIT_WRITE_DR3, "write_dr3" }, \
+ { SVM_EXIT_WRITE_DR5, "write_dr5" }, \
+ { SVM_EXIT_WRITE_DR7, "write_dr7" }, \
+ { SVM_EXIT_EXCP_BASE + DB_VECTOR, "DB excp" }, \
+ { SVM_EXIT_EXCP_BASE + BP_VECTOR, "BP excp" }, \
+ { SVM_EXIT_EXCP_BASE + UD_VECTOR, "UD excp" }, \
+ { SVM_EXIT_EXCP_BASE + PF_VECTOR, "PF excp" }, \
+ { SVM_EXIT_EXCP_BASE + NM_VECTOR, "NM excp" }, \
+ { SVM_EXIT_EXCP_BASE + MC_VECTOR, "MC excp" }, \
+ { SVM_EXIT_INTR, "interrupt" }, \
+ { SVM_EXIT_NMI, "nmi" }, \
+ { SVM_EXIT_SMI, "smi" }, \
+ { SVM_EXIT_INIT, "init" }, \
+ { SVM_EXIT_VINTR, "vintr" }, \
+ { SVM_EXIT_CPUID, "cpuid" }, \
+ { SVM_EXIT_INVD, "invd" }, \
+ { SVM_EXIT_HLT, "hlt" }, \
+ { SVM_EXIT_INVLPG, "invlpg" }, \
+ { SVM_EXIT_INVLPGA, "invlpga" }, \
+ { SVM_EXIT_IOIO, "io" }, \
+ { SVM_EXIT_MSR, "msr" }, \
+ { SVM_EXIT_TASK_SWITCH, "task_switch" }, \
+ { SVM_EXIT_SHUTDOWN, "shutdown" }, \
+ { SVM_EXIT_VMRUN, "vmrun" }, \
+ { SVM_EXIT_VMMCALL, "hypercall" }, \
+ { SVM_EXIT_VMLOAD, "vmload" }, \
+ { SVM_EXIT_VMSAVE, "vmsave" }, \
+ { SVM_EXIT_STGI, "stgi" }, \
+ { SVM_EXIT_CLGI, "clgi" }, \
+ { SVM_EXIT_SKINIT, "skinit" }, \
+ { SVM_EXIT_WBINVD, "wbinvd" }, \
+ { SVM_EXIT_MONITOR, "monitor" }, \
+ { SVM_EXIT_MWAIT, "mwait" }, \
+ { SVM_EXIT_XSETBV, "xsetbv" }, \
+ { SVM_EXIT_NPF, "npf" }
+
/*
* Tracepoint for kvm guest exit:
*/
@@ -205,8 +296,9 @@
),
TP_printk("reason %s rip 0x%lx info %llx %llx",
- ftrace_print_symbols_seq(p, __entry->exit_reason,
- kvm_x86_ops->exit_reasons_str),
+ (__entry->isa == KVM_ISA_VMX) ?
+ __print_symbolic(__entry->exit_reason, VMX_EXIT_REASONS) :
+ __print_symbolic(__entry->exit_reason, SVM_EXIT_REASONS),
__entry->guest_rip, __entry->info1, __entry->info2)
);
@@ -486,9 +578,9 @@
TRACE_EVENT(kvm_nested_vmexit,
TP_PROTO(__u64 rip, __u32 exit_code,
__u64 exit_info1, __u64 exit_info2,
- __u32 exit_int_info, __u32 exit_int_info_err),
+ __u32 exit_int_info, __u32 exit_int_info_err, __u32 isa),
TP_ARGS(rip, exit_code, exit_info1, exit_info2,
- exit_int_info, exit_int_info_err),
+ exit_int_info, exit_int_info_err, isa),
TP_STRUCT__entry(
__field( __u64, rip )
@@ -497,6 +589,7 @@
__field( __u64, exit_info2 )
__field( __u32, exit_int_info )
__field( __u32, exit_int_info_err )
+ __field( __u32, isa )
),
TP_fast_assign(
@@ -506,12 +599,14 @@
__entry->exit_info2 = exit_info2;
__entry->exit_int_info = exit_int_info;
__entry->exit_int_info_err = exit_int_info_err;
+ __entry->isa = isa;
),
TP_printk("rip: 0x%016llx reason: %s ext_inf1: 0x%016llx "
"ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x",
__entry->rip,
- ftrace_print_symbols_seq(p, __entry->exit_code,
- kvm_x86_ops->exit_reasons_str),
+ (__entry->isa == KVM_ISA_VMX) ?
+ __print_symbolic(__entry->exit_code, VMX_EXIT_REASONS) :
+ __print_symbolic(__entry->exit_code, SVM_EXIT_REASONS),
__entry->exit_info1, __entry->exit_info2,
__entry->exit_int_info, __entry->exit_int_info_err)
);
@@ -522,9 +617,9 @@
TRACE_EVENT(kvm_nested_vmexit_inject,
TP_PROTO(__u32 exit_code,
__u64 exit_info1, __u64 exit_info2,
- __u32 exit_int_info, __u32 exit_int_info_err),
+ __u32 exit_int_info, __u32 exit_int_info_err, __u32 isa),
TP_ARGS(exit_code, exit_info1, exit_info2,
- exit_int_info, exit_int_info_err),
+ exit_int_info, exit_int_info_err, isa),
TP_STRUCT__entry(
__field( __u32, exit_code )
@@ -532,6 +627,7 @@
__field( __u64, exit_info2 )
__field( __u32, exit_int_info )
__field( __u32, exit_int_info_err )
+ __field( __u32, isa )
),
TP_fast_assign(
@@ -540,12 +636,14 @@
__entry->exit_info2 = exit_info2;
__entry->exit_int_info = exit_int_info;
__entry->exit_int_info_err = exit_int_info_err;
+ __entry->isa = isa;
),
TP_printk("reason: %s ext_inf1: 0x%016llx "
"ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x",
- ftrace_print_symbols_seq(p, __entry->exit_code,
- kvm_x86_ops->exit_reasons_str),
+ (__entry->isa == KVM_ISA_VMX) ?
+ __print_symbolic(__entry->exit_code, VMX_EXIT_REASONS) :
+ __print_symbolic(__entry->exit_code, SVM_EXIT_REASONS),
__entry->exit_info1, __entry->exit_info2,
__entry->exit_int_info, __entry->exit_int_info_err)
);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e65a158..a0d6bd9 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -71,6 +71,9 @@
static int __read_mostly yield_on_hlt = 1;
module_param(yield_on_hlt, bool, S_IRUGO);
+static int __read_mostly fasteoi = 1;
+module_param(fasteoi, bool, S_IRUGO);
+
/*
* If nested=1, nested virtualization is supported, i.e., guests may use
* VMX and be a hypervisor for its own guests. If nested=0, guests may not
@@ -1748,6 +1751,21 @@
}
/*
+ * Like guest_read_tsc, but always returns L1's notion of the timestamp
+ * counter, even if a nested guest (L2) is currently running.
+ */
+u64 vmx_read_l1_tsc(struct kvm_vcpu *vcpu)
+{
+ u64 host_tsc, tsc_offset;
+
+ rdtscll(host_tsc);
+ tsc_offset = is_guest_mode(vcpu) ?
+ to_vmx(vcpu)->nested.vmcs01_tsc_offset :
+ vmcs_read64(TSC_OFFSET);
+ return host_tsc + tsc_offset;
+}
+
+/*
* Empty call-back. Needs to be implemented when VMX enables the SET_TSC_KHZ
* ioctl. In this case the call-back should update internal vmx state to make
* the changes effective.
@@ -1762,15 +1780,23 @@
*/
static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
{
- vmcs_write64(TSC_OFFSET, offset);
- if (is_guest_mode(vcpu))
+ if (is_guest_mode(vcpu)) {
/*
- * We're here if L1 chose not to trap the TSC MSR. Since
- * prepare_vmcs12() does not copy tsc_offset, we need to also
- * set the vmcs12 field here.
+ * We're here if L1 chose not to trap WRMSR to TSC. According
+ * to the spec, this should set L1's TSC; The offset that L1
+ * set for L2 remains unchanged, and still needs to be added
+ * to the newly set TSC to get L2's TSC.
*/
- get_vmcs12(vcpu)->tsc_offset = offset -
- to_vmx(vcpu)->nested.vmcs01_tsc_offset;
+ struct vmcs12 *vmcs12;
+ to_vmx(vcpu)->nested.vmcs01_tsc_offset = offset;
+ /* recalculate vmcs02.TSC_OFFSET: */
+ vmcs12 = get_vmcs12(vcpu);
+ vmcs_write64(TSC_OFFSET, offset +
+ (nested_cpu_has(vmcs12, CPU_BASED_USE_TSC_OFFSETING) ?
+ vmcs12->tsc_offset : 0));
+ } else {
+ vmcs_write64(TSC_OFFSET, offset);
+ }
}
static void vmx_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment)
@@ -2736,8 +2762,8 @@
guest_tr_ar = vmcs_read32(GUEST_TR_AR_BYTES);
if ((guest_tr_ar & AR_TYPE_MASK) != AR_TYPE_BUSY_64_TSS) {
- printk(KERN_DEBUG "%s: tss fixup for long mode. \n",
- __func__);
+ pr_debug_ratelimited("%s: tss fixup for long mode. \n",
+ __func__);
vmcs_write32(GUEST_TR_AR_BYTES,
(guest_tr_ar & ~AR_TYPE_MASK)
| AR_TYPE_BUSY_64_TSS);
@@ -4115,8 +4141,7 @@
error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
if (is_page_fault(intr_info)) {
/* EPT won't cause page fault directly */
- if (enable_ept)
- BUG();
+ BUG_ON(enable_ept);
cr2 = vmcs_readl(EXIT_QUALIFICATION);
trace_kvm_page_fault(cr2, error_code);
@@ -4518,6 +4543,24 @@
static int handle_apic_access(struct kvm_vcpu *vcpu)
{
+ if (likely(fasteoi)) {
+ unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+ int access_type, offset;
+
+ access_type = exit_qualification & APIC_ACCESS_TYPE;
+ offset = exit_qualification & APIC_ACCESS_OFFSET;
+ /*
+ * Sane guest uses MOV to write EOI, with written value
+ * not cared. So make a short-circuit here by avoiding
+ * heavy instruction emulation.
+ */
+ if ((access_type == TYPE_LINEAR_APIC_INST_WRITE) &&
+ (offset == APIC_EOI)) {
+ kvm_lapic_set_eoi(vcpu);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ }
+ }
return emulate_instruction(vcpu, 0) == EMULATE_DONE;
}
@@ -5591,8 +5634,8 @@
return 0;
if (unlikely(vmx->fail)) {
- printk(KERN_INFO "%s failed vm entry %x\n",
- __func__, vmcs_read32(VM_INSTRUCTION_ERROR));
+ pr_info_ratelimited("%s failed vm entry %x\n", __func__,
+ vmcs_read32(VM_INSTRUCTION_ERROR));
return 1;
}
@@ -5696,8 +5739,6 @@
u32 exit_reason = vmx->exit_reason;
u32 vectoring_info = vmx->idt_vectoring_info;
- trace_kvm_exit(exit_reason, vcpu, KVM_ISA_VMX);
-
/* If guest state is invalid, start emulating */
if (vmx->emulation_required && emulate_invalid_guest_state)
return handle_invalid_guest_state(vcpu);
@@ -6101,6 +6142,7 @@
vmx->loaded_vmcs->launched = 1;
vmx->exit_reason = vmcs_read32(VM_EXIT_REASON);
+ trace_kvm_exit(vmx->exit_reason, vcpu, KVM_ISA_VMX);
vmx_complete_atomic_exit(vmx);
vmx_recover_nmi_blocking(vmx);
@@ -6241,49 +6283,6 @@
return ret;
}
-#define _ER(x) { EXIT_REASON_##x, #x }
-
-static const struct trace_print_flags vmx_exit_reasons_str[] = {
- _ER(EXCEPTION_NMI),
- _ER(EXTERNAL_INTERRUPT),
- _ER(TRIPLE_FAULT),
- _ER(PENDING_INTERRUPT),
- _ER(NMI_WINDOW),
- _ER(TASK_SWITCH),
- _ER(CPUID),
- _ER(HLT),
- _ER(INVLPG),
- _ER(RDPMC),
- _ER(RDTSC),
- _ER(VMCALL),
- _ER(VMCLEAR),
- _ER(VMLAUNCH),
- _ER(VMPTRLD),
- _ER(VMPTRST),
- _ER(VMREAD),
- _ER(VMRESUME),
- _ER(VMWRITE),
- _ER(VMOFF),
- _ER(VMON),
- _ER(CR_ACCESS),
- _ER(DR_ACCESS),
- _ER(IO_INSTRUCTION),
- _ER(MSR_READ),
- _ER(MSR_WRITE),
- _ER(MWAIT_INSTRUCTION),
- _ER(MONITOR_INSTRUCTION),
- _ER(PAUSE_INSTRUCTION),
- _ER(MCE_DURING_VMENTRY),
- _ER(TPR_BELOW_THRESHOLD),
- _ER(APIC_ACCESS),
- _ER(EPT_VIOLATION),
- _ER(EPT_MISCONFIG),
- _ER(WBINVD),
- { -1, NULL }
-};
-
-#undef _ER
-
static int vmx_get_lpage_level(void)
{
if (enable_ept && !cpu_has_vmx_ept_1g_page())
@@ -6514,8 +6513,11 @@
set_cr4_guest_host_mask(vmx);
- vmcs_write64(TSC_OFFSET,
- vmx->nested.vmcs01_tsc_offset + vmcs12->tsc_offset);
+ if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING)
+ vmcs_write64(TSC_OFFSET,
+ vmx->nested.vmcs01_tsc_offset + vmcs12->tsc_offset);
+ else
+ vmcs_write64(TSC_OFFSET, vmx->nested.vmcs01_tsc_offset);
if (enable_vpid) {
/*
@@ -6610,9 +6612,8 @@
if (vmcs12->vm_entry_msr_load_count > 0 ||
vmcs12->vm_exit_msr_load_count > 0 ||
vmcs12->vm_exit_msr_store_count > 0) {
- if (printk_ratelimit())
- printk(KERN_WARNING
- "%s: VMCS MSR_{LOAD,STORE} unsupported\n", __func__);
+ pr_warn_ratelimited("%s: VMCS MSR_{LOAD,STORE} unsupported\n",
+ __func__);
nested_vmx_failValid(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
return 1;
}
@@ -6922,7 +6923,7 @@
load_vmcs12_host_state(vcpu, vmcs12);
- /* Update TSC_OFFSET if vmx_adjust_tsc_offset() was used while L2 ran */
+ /* Update TSC_OFFSET if TSC was changed while L2 ran */
vmcs_write64(TSC_OFFSET, vmx->nested.vmcs01_tsc_offset);
/* This is needed for same reason as it was needed in prepare_vmcs02 */
@@ -7039,7 +7040,6 @@
.get_mt_mask = vmx_get_mt_mask,
.get_exit_info = vmx_get_exit_info,
- .exit_reasons_str = vmx_exit_reasons_str,
.get_lpage_level = vmx_get_lpage_level,
@@ -7055,6 +7055,7 @@
.write_tsc_offset = vmx_write_tsc_offset,
.adjust_tsc_offset = vmx_adjust_tsc_offset,
.compute_tsc_offset = vmx_compute_tsc_offset,
+ .read_l1_tsc = vmx_read_l1_tsc,
.set_tdp_cr3 = vmx_set_cr3,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 84a28ea..c38efd7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -44,6 +44,7 @@
#include <linux/perf_event.h>
#include <linux/uaccess.h>
#include <linux/hash.h>
+#include <linux/pci.h>
#include <trace/events/kvm.h>
#define CREATE_TRACE_POINTS
@@ -83,6 +84,7 @@
static void update_cr8_intercept(struct kvm_vcpu *vcpu);
static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries);
+static void process_nmi(struct kvm_vcpu *vcpu);
struct kvm_x86_ops *kvm_x86_ops;
EXPORT_SYMBOL_GPL(kvm_x86_ops);
@@ -359,8 +361,8 @@
void kvm_inject_nmi(struct kvm_vcpu *vcpu)
{
- kvm_make_request(KVM_REQ_EVENT, vcpu);
- vcpu->arch.nmi_pending = 1;
+ atomic_inc(&vcpu->arch.nmi_queued);
+ kvm_make_request(KVM_REQ_NMI, vcpu);
}
EXPORT_SYMBOL_GPL(kvm_inject_nmi);
@@ -599,6 +601,8 @@
static void update_cpuid(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ u32 timer_mode_mask;
best = kvm_find_cpuid_entry(vcpu, 1, 0);
if (!best)
@@ -610,6 +614,16 @@
if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE))
best->ecx |= bit(X86_FEATURE_OSXSAVE);
}
+
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ best->function == 0x1) {
+ best->ecx |= bit(X86_FEATURE_TSC_DEADLINE_TIMER);
+ timer_mode_mask = 3 << 17;
+ } else
+ timer_mode_mask = 1 << 17;
+
+ if (apic)
+ apic->lapic_timer.timer_mode_mask = timer_mode_mask;
}
int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
@@ -825,6 +839,7 @@
static unsigned num_msrs_to_save;
static u32 emulated_msrs[] = {
+ MSR_IA32_TSCDEADLINE,
MSR_IA32_MISC_ENABLE,
MSR_IA32_MCG_STATUS,
MSR_IA32_MCG_CTL,
@@ -1000,7 +1015,7 @@
return ret;
}
-static u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu)
+u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu)
{
if (vcpu->arch.virtual_tsc_khz)
return vcpu->arch.virtual_tsc_khz;
@@ -1098,7 +1113,7 @@
/* Keep irq disabled to prevent changes to the clock */
local_irq_save(flags);
- kvm_get_msr(v, MSR_IA32_TSC, &tsc_timestamp);
+ tsc_timestamp = kvm_x86_ops->read_l1_tsc(v);
kernel_ns = get_kernel_ns();
this_tsc_khz = vcpu_tsc_khz(v);
if (unlikely(this_tsc_khz == 0)) {
@@ -1564,6 +1579,9 @@
break;
case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
return kvm_x2apic_msr_write(vcpu, msr, data);
+ case MSR_IA32_TSCDEADLINE:
+ kvm_set_lapic_tscdeadline_msr(vcpu, data);
+ break;
case MSR_IA32_MISC_ENABLE:
vcpu->arch.ia32_misc_enable_msr = data;
break;
@@ -1825,6 +1843,9 @@
return kvm_hv_vapic_msr_read(vcpu, APIC_ICR, pdata);
case HV_X64_MSR_TPR:
return kvm_hv_vapic_msr_read(vcpu, APIC_TASKPRI, pdata);
+ case HV_X64_MSR_APIC_ASSIST_PAGE:
+ data = vcpu->arch.hv_vapic;
+ break;
default:
pr_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
return 1;
@@ -1839,7 +1860,6 @@
switch (msr) {
case MSR_IA32_PLATFORM_ID:
- case MSR_IA32_UCODE_REV:
case MSR_IA32_EBL_CR_POWERON:
case MSR_IA32_DEBUGCTLMSR:
case MSR_IA32_LASTBRANCHFROMIP:
@@ -1860,6 +1880,9 @@
case MSR_FAM10H_MMIO_CONF_BASE:
data = 0;
break;
+ case MSR_IA32_UCODE_REV:
+ data = 0x100000000ULL;
+ break;
case MSR_MTRRcap:
data = 0x500 | KVM_NR_VAR_MTRR;
break;
@@ -1888,6 +1911,9 @@
case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
return kvm_x2apic_msr_read(vcpu, msr, pdata);
break;
+ case MSR_IA32_TSCDEADLINE:
+ data = kvm_get_lapic_tscdeadline_msr(vcpu);
+ break;
case MSR_IA32_MISC_ENABLE:
data = vcpu->arch.ia32_misc_enable_msr;
break;
@@ -2086,6 +2112,9 @@
r = !kvm_x86_ops->cpu_has_accelerated_tpr();
break;
case KVM_CAP_NR_VCPUS:
+ r = KVM_SOFT_MAX_VCPUS;
+ break;
+ case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
case KVM_CAP_NR_MEMSLOTS:
@@ -2095,7 +2124,7 @@
r = 0;
break;
case KVM_CAP_IOMMU:
- r = iommu_found();
+ r = iommu_present(&pci_bus_type);
break;
case KVM_CAP_MCE:
r = KVM_MAX_MCE_BANKS;
@@ -2210,7 +2239,7 @@
s64 tsc_delta;
u64 tsc;
- kvm_get_msr(vcpu, MSR_IA32_TSC, &tsc);
+ tsc = kvm_x86_ops->read_l1_tsc(vcpu);
tsc_delta = !vcpu->arch.last_guest_tsc ? 0 :
tsc - vcpu->arch.last_guest_tsc;
@@ -2234,7 +2263,7 @@
{
kvm_x86_ops->vcpu_put(vcpu);
kvm_put_guest_fpu(vcpu);
- kvm_get_msr(vcpu, MSR_IA32_TSC, &vcpu->arch.last_guest_tsc);
+ vcpu->arch.last_guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu);
}
static int is_efer_nx(void)
@@ -2819,6 +2848,7 @@
static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events)
{
+ process_nmi(vcpu);
events->exception.injected =
vcpu->arch.exception.pending &&
!kvm_exception_is_soft(vcpu->arch.exception.nr);
@@ -2836,7 +2866,7 @@
KVM_X86_SHADOW_INT_MOV_SS | KVM_X86_SHADOW_INT_STI);
events->nmi.injected = vcpu->arch.nmi_injected;
- events->nmi.pending = vcpu->arch.nmi_pending;
+ events->nmi.pending = vcpu->arch.nmi_pending != 0;
events->nmi.masked = kvm_x86_ops->get_nmi_mask(vcpu);
events->nmi.pad = 0;
@@ -2856,6 +2886,7 @@
| KVM_VCPUEVENT_VALID_SHADOW))
return -EINVAL;
+ process_nmi(vcpu);
vcpu->arch.exception.pending = events->exception.injected;
vcpu->arch.exception.nr = events->exception.nr;
vcpu->arch.exception.has_error_code = events->exception.has_error_code;
@@ -3556,7 +3587,11 @@
if (r) {
mutex_lock(&kvm->slots_lock);
kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS,
- &vpic->dev);
+ &vpic->dev_master);
+ kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS,
+ &vpic->dev_slave);
+ kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS,
+ &vpic->dev_eclr);
mutex_unlock(&kvm->slots_lock);
kfree(vpic);
goto create_irqchip_unlock;
@@ -4045,62 +4080,6 @@
return 0;
}
-static int emulator_read_emulated(struct x86_emulate_ctxt *ctxt,
- unsigned long addr,
- void *val,
- unsigned int bytes,
- struct x86_exception *exception)
-{
- struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt);
- gpa_t gpa;
- int handled, ret;
-
- if (vcpu->mmio_read_completed) {
- memcpy(val, vcpu->mmio_data, bytes);
- trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes,
- vcpu->mmio_phys_addr, *(u64 *)val);
- vcpu->mmio_read_completed = 0;
- return X86EMUL_CONTINUE;
- }
-
- ret = vcpu_mmio_gva_to_gpa(vcpu, addr, &gpa, exception, false);
-
- if (ret < 0)
- return X86EMUL_PROPAGATE_FAULT;
-
- if (ret)
- goto mmio;
-
- if (kvm_read_guest_virt(ctxt, addr, val, bytes, exception)
- == X86EMUL_CONTINUE)
- return X86EMUL_CONTINUE;
-
-mmio:
- /*
- * Is this MMIO handled locally?
- */
- handled = vcpu_mmio_read(vcpu, gpa, bytes, val);
-
- if (handled == bytes)
- return X86EMUL_CONTINUE;
-
- gpa += handled;
- bytes -= handled;
- val += handled;
-
- trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, bytes, gpa, 0);
-
- vcpu->mmio_needed = 1;
- vcpu->run->exit_reason = KVM_EXIT_MMIO;
- vcpu->run->mmio.phys_addr = vcpu->mmio_phys_addr = gpa;
- vcpu->mmio_size = bytes;
- vcpu->run->mmio.len = min(vcpu->mmio_size, 8);
- vcpu->run->mmio.is_write = vcpu->mmio_is_write = 0;
- vcpu->mmio_index = 0;
-
- return X86EMUL_IO_NEEDED;
-}
-
int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
const void *val, int bytes)
{
@@ -4113,16 +4092,93 @@
return 1;
}
-static int emulator_write_emulated_onepage(unsigned long addr,
- const void *val,
- unsigned int bytes,
- struct x86_exception *exception,
- struct kvm_vcpu *vcpu)
+struct read_write_emulator_ops {
+ int (*read_write_prepare)(struct kvm_vcpu *vcpu, void *val,
+ int bytes);
+ int (*read_write_emulate)(struct kvm_vcpu *vcpu, gpa_t gpa,
+ void *val, int bytes);
+ int (*read_write_mmio)(struct kvm_vcpu *vcpu, gpa_t gpa,
+ int bytes, void *val);
+ int (*read_write_exit_mmio)(struct kvm_vcpu *vcpu, gpa_t gpa,
+ void *val, int bytes);
+ bool write;
+};
+
+static int read_prepare(struct kvm_vcpu *vcpu, void *val, int bytes)
+{
+ if (vcpu->mmio_read_completed) {
+ memcpy(val, vcpu->mmio_data, bytes);
+ trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes,
+ vcpu->mmio_phys_addr, *(u64 *)val);
+ vcpu->mmio_read_completed = 0;
+ return 1;
+ }
+
+ return 0;
+}
+
+static int read_emulate(struct kvm_vcpu *vcpu, gpa_t gpa,
+ void *val, int bytes)
+{
+ return !kvm_read_guest(vcpu->kvm, gpa, val, bytes);
+}
+
+static int write_emulate(struct kvm_vcpu *vcpu, gpa_t gpa,
+ void *val, int bytes)
+{
+ return emulator_write_phys(vcpu, gpa, val, bytes);
+}
+
+static int write_mmio(struct kvm_vcpu *vcpu, gpa_t gpa, int bytes, void *val)
+{
+ trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, bytes, gpa, *(u64 *)val);
+ return vcpu_mmio_write(vcpu, gpa, bytes, val);
+}
+
+static int read_exit_mmio(struct kvm_vcpu *vcpu, gpa_t gpa,
+ void *val, int bytes)
+{
+ trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, bytes, gpa, 0);
+ return X86EMUL_IO_NEEDED;
+}
+
+static int write_exit_mmio(struct kvm_vcpu *vcpu, gpa_t gpa,
+ void *val, int bytes)
+{
+ memcpy(vcpu->mmio_data, val, bytes);
+ memcpy(vcpu->run->mmio.data, vcpu->mmio_data, 8);
+ return X86EMUL_CONTINUE;
+}
+
+static struct read_write_emulator_ops read_emultor = {
+ .read_write_prepare = read_prepare,
+ .read_write_emulate = read_emulate,
+ .read_write_mmio = vcpu_mmio_read,
+ .read_write_exit_mmio = read_exit_mmio,
+};
+
+static struct read_write_emulator_ops write_emultor = {
+ .read_write_emulate = write_emulate,
+ .read_write_mmio = write_mmio,
+ .read_write_exit_mmio = write_exit_mmio,
+ .write = true,
+};
+
+static int emulator_read_write_onepage(unsigned long addr, void *val,
+ unsigned int bytes,
+ struct x86_exception *exception,
+ struct kvm_vcpu *vcpu,
+ struct read_write_emulator_ops *ops)
{
gpa_t gpa;
int handled, ret;
+ bool write = ops->write;
- ret = vcpu_mmio_gva_to_gpa(vcpu, addr, &gpa, exception, true);
+ if (ops->read_write_prepare &&
+ ops->read_write_prepare(vcpu, val, bytes))
+ return X86EMUL_CONTINUE;
+
+ ret = vcpu_mmio_gva_to_gpa(vcpu, addr, &gpa, exception, write);
if (ret < 0)
return X86EMUL_PROPAGATE_FAULT;
@@ -4131,15 +4187,14 @@
if (ret)
goto mmio;
- if (emulator_write_phys(vcpu, gpa, val, bytes))
+ if (ops->read_write_emulate(vcpu, gpa, val, bytes))
return X86EMUL_CONTINUE;
mmio:
- trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, bytes, gpa, *(u64 *)val);
/*
* Is this MMIO handled locally?
*/
- handled = vcpu_mmio_write(vcpu, gpa, bytes, val);
+ handled = ops->read_write_mmio(vcpu, gpa, bytes, val);
if (handled == bytes)
return X86EMUL_CONTINUE;
@@ -4148,23 +4203,20 @@
val += handled;
vcpu->mmio_needed = 1;
- memcpy(vcpu->mmio_data, val, bytes);
vcpu->run->exit_reason = KVM_EXIT_MMIO;
vcpu->run->mmio.phys_addr = vcpu->mmio_phys_addr = gpa;
vcpu->mmio_size = bytes;
vcpu->run->mmio.len = min(vcpu->mmio_size, 8);
- vcpu->run->mmio.is_write = vcpu->mmio_is_write = 1;
- memcpy(vcpu->run->mmio.data, vcpu->mmio_data, 8);
+ vcpu->run->mmio.is_write = vcpu->mmio_is_write = write;
vcpu->mmio_index = 0;
- return X86EMUL_CONTINUE;
+ return ops->read_write_exit_mmio(vcpu, gpa, val, bytes);
}
-int emulator_write_emulated(struct x86_emulate_ctxt *ctxt,
- unsigned long addr,
- const void *val,
- unsigned int bytes,
- struct x86_exception *exception)
+int emulator_read_write(struct x86_emulate_ctxt *ctxt, unsigned long addr,
+ void *val, unsigned int bytes,
+ struct x86_exception *exception,
+ struct read_write_emulator_ops *ops)
{
struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt);
@@ -4173,16 +4225,38 @@
int rc, now;
now = -addr & ~PAGE_MASK;
- rc = emulator_write_emulated_onepage(addr, val, now, exception,
- vcpu);
+ rc = emulator_read_write_onepage(addr, val, now, exception,
+ vcpu, ops);
+
if (rc != X86EMUL_CONTINUE)
return rc;
addr += now;
val += now;
bytes -= now;
}
- return emulator_write_emulated_onepage(addr, val, bytes, exception,
- vcpu);
+
+ return emulator_read_write_onepage(addr, val, bytes, exception,
+ vcpu, ops);
+}
+
+static int emulator_read_emulated(struct x86_emulate_ctxt *ctxt,
+ unsigned long addr,
+ void *val,
+ unsigned int bytes,
+ struct x86_exception *exception)
+{
+ return emulator_read_write(ctxt, addr, val, bytes,
+ exception, &read_emultor);
+}
+
+int emulator_write_emulated(struct x86_emulate_ctxt *ctxt,
+ unsigned long addr,
+ const void *val,
+ unsigned int bytes,
+ struct x86_exception *exception)
+{
+ return emulator_read_write(ctxt, addr, (void *)val, bytes,
+ exception, &write_emultor);
}
#define CMPXCHG_TYPE(t, ptr, old, new) \
@@ -4712,7 +4786,7 @@
kvm_set_rflags(vcpu, ctxt->eflags);
if (irq == NMI_VECTOR)
- vcpu->arch.nmi_pending = false;
+ vcpu->arch.nmi_pending = 0;
else
vcpu->arch.interrupt.pending = false;
@@ -4788,7 +4862,7 @@
trace_kvm_emulate_insn_start(vcpu);
++vcpu->stat.insn_emulation;
- if (r) {
+ if (r != EMULATION_OK) {
if (emulation_type & EMULTYPE_TRAP_UD)
return EMULATE_FAIL;
if (reexecute_instruction(vcpu, cr2))
@@ -5521,7 +5595,7 @@
/* try to inject new event if pending */
if (vcpu->arch.nmi_pending) {
if (kvm_x86_ops->nmi_allowed(vcpu)) {
- vcpu->arch.nmi_pending = false;
+ --vcpu->arch.nmi_pending;
vcpu->arch.nmi_injected = true;
kvm_x86_ops->set_nmi(vcpu);
}
@@ -5553,10 +5627,26 @@
}
}
+static void process_nmi(struct kvm_vcpu *vcpu)
+{
+ unsigned limit = 2;
+
+ /*
+ * x86 is limited to one NMI running, and one NMI pending after it.
+ * If an NMI is already in progress, limit further NMIs to just one.
+ * Otherwise, allow two (and we'll inject the first one immediately).
+ */
+ if (kvm_x86_ops->get_nmi_mask(vcpu) || vcpu->arch.nmi_injected)
+ limit = 1;
+
+ vcpu->arch.nmi_pending += atomic_xchg(&vcpu->arch.nmi_queued, 0);
+ vcpu->arch.nmi_pending = min(vcpu->arch.nmi_pending, limit);
+ kvm_make_request(KVM_REQ_EVENT, vcpu);
+}
+
static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
{
int r;
- bool nmi_pending;
bool req_int_win = !irqchip_in_kernel(vcpu->kvm) &&
vcpu->run->request_interrupt_window;
@@ -5596,6 +5686,8 @@
}
if (kvm_check_request(KVM_REQ_STEAL_UPDATE, vcpu))
record_steal_time(vcpu);
+ if (kvm_check_request(KVM_REQ_NMI, vcpu))
+ process_nmi(vcpu);
}
@@ -5603,19 +5695,11 @@
if (unlikely(r))
goto out;
- /*
- * An NMI can be injected between local nmi_pending read and
- * vcpu->arch.nmi_pending read inside inject_pending_event().
- * But in that case, KVM_REQ_EVENT will be set, which makes
- * the race described above benign.
- */
- nmi_pending = ACCESS_ONCE(vcpu->arch.nmi_pending);
-
if (kvm_check_request(KVM_REQ_EVENT, vcpu) || req_int_win) {
inject_pending_event(vcpu);
/* enable NMI/IRQ window open exits if needed */
- if (nmi_pending)
+ if (vcpu->arch.nmi_pending)
kvm_x86_ops->enable_nmi_window(vcpu);
else if (kvm_cpu_has_interrupt(vcpu) || req_int_win)
kvm_x86_ops->enable_irq_window(vcpu);
@@ -5678,7 +5762,7 @@
if (hw_breakpoint_active())
hw_breakpoint_restore();
- kvm_get_msr(vcpu, MSR_IA32_TSC, &vcpu->arch.last_guest_tsc);
+ vcpu->arch.last_guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu);
vcpu->mode = OUTSIDE_GUEST_MODE;
smp_wmb();
@@ -6323,7 +6407,8 @@
int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu)
{
- vcpu->arch.nmi_pending = false;
+ atomic_set(&vcpu->arch.nmi_queued, 0);
+ vcpu->arch.nmi_pending = 0;
vcpu->arch.nmi_injected = false;
vcpu->arch.switch_db_regs = 0;
@@ -6598,7 +6683,7 @@
!vcpu->arch.apf.halted)
|| !list_empty_careful(&vcpu->async_pf.done)
|| vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED
- || vcpu->arch.nmi_pending ||
+ || atomic_read(&vcpu->arch.nmi_queued) ||
(kvm_arch_interrupt_allowed(vcpu) &&
kvm_cpu_has_interrupt(vcpu));
}
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 13ee258..f63da5e 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -70,6 +70,7 @@
#include <asm/i387.h>
#include <asm/stackprotector.h>
#include <asm/reboot.h> /* for struct machine_ops */
+#include <asm/kvm_para.h>
/*G:010
* Welcome to the Guest!
@@ -455,6 +456,15 @@
*ax &= 0xFFFFF0FF;
*ax |= 0x00000500;
break;
+
+ /*
+ * This is used to detect if we're running under KVM. We might be,
+ * but that's a Host matter, not us. So say we're not.
+ */
+ case KVM_CPUID_SIGNATURE:
+ *bx = *cx = *dx = 0;
+ break;
+
/*
* 0x80000000 returns the highest Extended Function, so we futureproof
* like we do above by limiting it to known fields.
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9c7378d..5db0490 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -17,7 +17,7 @@
#include <asm/traps.h> /* dotraplinkage, ... */
#include <asm/pgalloc.h> /* pgd_*(), ... */
#include <asm/kmemcheck.h> /* kmemcheck_*(), ... */
-#include <asm/vsyscall.h>
+#include <asm/fixmap.h> /* VSYSCALL_START */
/*
* Page fault error code bits:
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index dbe34b9..ea30585 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -108,16 +108,6 @@
SetPageReferenced(page);
}
-static inline void get_huge_page_tail(struct page *page)
-{
- /*
- * __split_huge_page_refcount() cannot run
- * from under us.
- */
- VM_BUG_ON(atomic_read(&page->_count) < 0);
- atomic_inc(&page->_count);
-}
-
static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
unsigned long end, int write, struct page **pages, int *nr)
{
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 1dab519..4b5ba85 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -31,6 +31,10 @@
#include <linux/sched.h>
#include <asm/elf.h>
+struct __read_mostly va_alignment va_align = {
+ .flags = -1,
+};
+
static unsigned int stack_maxrandom_size(void)
{
unsigned int max = 0;
@@ -42,7 +46,6 @@
return max;
}
-
/*
* Top of mmap area (just below the process stack).
*
@@ -51,21 +54,6 @@
#define MIN_GAP (128*1024*1024UL + stack_maxrandom_size())
#define MAX_GAP (TASK_SIZE/6*5)
-/*
- * True on X86_32 or when emulating IA32 on X86_64
- */
-static int mmap_is_ia32(void)
-{
-#ifdef CONFIG_X86_32
- return 1;
-#endif
-#ifdef CONFIG_IA32_EMULATION
- if (test_thread_flag(TIF_IA32))
- return 1;
-#endif
- return 0;
-}
-
static int mmap_is_legacy(void)
{
if (current->personality & ADDR_COMPAT_LAYOUT)
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 9917609..41bd2a2 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -304,7 +304,7 @@
return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
}
-struct pci_raw_ops ce4100_pci_conf = {
+static const struct pci_raw_ops ce4100_pci_conf = {
.read = ce4100_conf_read,
.write = ce4100_conf_write,
};
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 92df322..7962ccb 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -33,8 +33,8 @@
int pcibios_last_bus = -1;
unsigned long pirq_table_addr;
struct pci_bus *pci_root_bus;
-struct pci_raw_ops *raw_pci_ops;
-struct pci_raw_ops *raw_pci_ext_ops;
+const struct pci_raw_ops *__read_mostly raw_pci_ops;
+const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val)
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index 4f2c704..1546059 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -79,7 +79,7 @@
#undef PCI_CONF1_ADDRESS
-struct pci_raw_ops pci_direct_conf1 = {
+const struct pci_raw_ops pci_direct_conf1 = {
.read = pci_conf1_read,
.write = pci_conf1_write,
};
@@ -175,7 +175,7 @@
#undef PCI_CONF2_ADDRESS
-struct pci_raw_ops pci_direct_conf2 = {
+static const struct pci_raw_ops pci_direct_conf2 = {
.read = pci_conf2_read,
.write = pci_conf2_write,
};
@@ -191,7 +191,7 @@
* This should be close to trivial, but it isn't, because there are buggy
* chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
*/
-static int __init pci_sanity_check(struct pci_raw_ops *o)
+static int __init pci_sanity_check(const struct pci_raw_ops *o)
{
u32 x = 0;
int year, devfn;
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index a3d9c54..5372e86 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -117,7 +117,7 @@
return 0;
}
-static struct pci_raw_ops pci_mmcfg = {
+static const struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index e783841..915a493 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -81,7 +81,7 @@
return 0;
}
-static struct pci_raw_ops pci_mmcfg = {
+static const struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 512a88c..51abf02 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -110,7 +110,7 @@
#undef PCI_CONF1_MQ_ADDRESS
-static struct pci_raw_ops pci_direct_conf1_mq = {
+static const struct pci_raw_ops pci_direct_conf1_mq = {
.read = pci_conf1_mq_read,
.write = pci_conf1_mq_write
};
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 5262603..7043a4f 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -301,7 +301,7 @@
return 0;
}
-static struct pci_raw_ops pci_olpc_conf = {
+static const struct pci_raw_ops pci_olpc_conf = {
.read = pci_olpc_read,
.write = pci_olpc_write,
};
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index f685535..db0e9a5 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -303,7 +303,7 @@
* Function table for BIOS32 access
*/
-static struct pci_raw_ops pci_bios_access = {
+static const struct pci_raw_ops pci_bios_access = {
.read = pci_bios_read,
.write = pci_bios_write
};
@@ -312,7 +312,7 @@
* Try to find PCI BIOS.
*/
-static struct pci_raw_ops * __devinit pci_find_bios(void)
+static const struct pci_raw_ops * __devinit pci_find_bios(void)
{
union bios32 *check;
unsigned char sum;
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 021eee9..8d87439 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,6 +1,7 @@
# Platform specific code goes here
obj-y += ce4100/
obj-y += efi/
+obj-y += geode/
obj-y += iris/
obj-y += mrst/
obj-y += olpc/
diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile
new file mode 100644
index 0000000..07c9cd0
--- /dev/null
+++ b/arch/x86/platform/geode/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ALIX) += alix.o
diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c
new file mode 100644
index 0000000..ca19736
--- /dev/null
+++ b/arch/x86/platform/geode/alix.c
@@ -0,0 +1,142 @@
+/*
+ * System Specific setup for PCEngines ALIX.
+ * At the moment this means setup of GPIO control of LEDs
+ * on Alix.2/3/6 boards.
+ *
+ *
+ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
+ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
+ *
+ * TODO: There are large similarities with leds-net5501.c
+ * by Alessandro Zummo <a.zummo@towertech.it>
+ * In the future leds-net5501.c should be migrated over to platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/geode.h>
+
+static int force = 0;
+module_param(force, bool, 0444);
+/* FIXME: Award bios is not automatically detected as Alix platform */
+MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform");
+
+static struct gpio_led alix_leds[] = {
+ {
+ .name = "alix:1",
+ .gpio = 6,
+ .default_trigger = "default-on",
+ .active_low = 1,
+ },
+ {
+ .name = "alix:2",
+ .gpio = 25,
+ .default_trigger = "default-off",
+ .active_low = 1,
+ },
+ {
+ .name = "alix:3",
+ .gpio = 27,
+ .default_trigger = "default-off",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data alix_leds_data = {
+ .num_leds = ARRAY_SIZE(alix_leds),
+ .leds = alix_leds,
+};
+
+static struct platform_device alix_leds_dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &alix_leds_data,
+};
+
+static void __init register_alix(void)
+{
+ /* Setup LED control through leds-gpio driver */
+ platform_device_register(&alix_leds_dev);
+}
+
+static int __init alix_present(unsigned long bios_phys,
+ const char *alix_sig,
+ size_t alix_sig_len)
+{
+ const size_t bios_len = 0x00010000;
+ const char *bios_virt;
+ const char *scan_end;
+ const char *p;
+ char name[64];
+
+ if (force) {
+ printk(KERN_NOTICE "%s: forced to skip BIOS test, "
+ "assume system is ALIX.2/ALIX.3\n",
+ KBUILD_MODNAME);
+ return 1;
+ }
+
+ bios_virt = phys_to_virt(bios_phys);
+ scan_end = bios_virt + bios_len - (alix_sig_len + 2);
+ for (p = bios_virt; p < scan_end; p++) {
+ const char *tail;
+ char *a;
+
+ if (memcmp(p, alix_sig, alix_sig_len) != 0)
+ continue;
+
+ memcpy(name, p, sizeof(name));
+
+ /* remove the first \0 character from string */
+ a = strchr(name, '\0');
+ if (a)
+ *a = ' ';
+
+ /* cut the string at a newline */
+ a = strchr(name, '\r');
+ if (a)
+ *a = '\0';
+
+ tail = p + alix_sig_len;
+ if ((tail[0] == '2' || tail[0] == '3')) {
+ printk(KERN_INFO
+ "%s: system is recognized as \"%s\"\n",
+ KBUILD_MODNAME, name);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int __init alix_init(void)
+{
+ const char tinybios_sig[] = "PC Engines ALIX.";
+ const char coreboot_sig[] = "PC Engines\0ALIX.";
+
+ if (!is_geode())
+ return 0;
+
+ if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
+ alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
+ register_alix();
+
+ return 0;
+}
+
+module_init(alix_init);
+
+MODULE_AUTHOR("Ed Wildgoose <kernel@wildgooses.com>");
+MODULE_DESCRIPTION("PCEngines ALIX System Setup");
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index e637952..6ed7afd 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -26,6 +26,8 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mfd/intel_msic.h>
#include <asm/setup.h>
#include <asm/mpspec_def.h>
@@ -483,6 +485,128 @@
return NULL;
}
+static struct resource msic_resources[] = {
+ {
+ .start = INTEL_MSIC_IRQ_PHYS_BASE,
+ .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct intel_msic_platform_data msic_pdata;
+
+static struct platform_device msic_device = {
+ .name = "intel_msic",
+ .id = -1,
+ .dev = {
+ .platform_data = &msic_pdata,
+ },
+ .num_resources = ARRAY_SIZE(msic_resources),
+ .resource = msic_resources,
+};
+
+static inline bool mrst_has_msic(void)
+{
+ return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+}
+
+static int msic_scu_status_change(struct notifier_block *nb,
+ unsigned long code, void *data)
+{
+ if (code == SCU_DOWN) {
+ platform_device_unregister(&msic_device);
+ return 0;
+ }
+
+ return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+ static struct notifier_block msic_scu_notifier = {
+ .notifier_call = msic_scu_status_change,
+ };
+
+ /*
+ * We need to be sure that the SCU IPC is ready before MSIC device
+ * can be registered.
+ */
+ if (mrst_has_msic())
+ intel_scu_notifier_add(&msic_scu_notifier);
+
+ return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+ struct sfi_device_table_entry *entry = info;
+
+ BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+ msic_pdata.irq[block] = entry->irq;
+
+ return no_platform_data(info);
+}
+
+static void *msic_battery_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static void *msic_gpio_platform_data(void *info)
+{
+ static struct intel_msic_gpio_pdata pdata;
+ int gpio = get_gpio_by_name("msic_gpio_base");
+
+ if (gpio < 0)
+ return NULL;
+
+ pdata.gpio_base = gpio;
+ msic_pdata.gpio = &pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static void *msic_audio_platform_data(void *info)
+{
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ pr_err("failed to create audio platform device\n");
+ return NULL;
+ }
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static void *msic_power_btn_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static void *msic_ocd_platform_data(void *info)
+{
+ static struct intel_msic_ocd_pdata pdata;
+ int gpio = get_gpio_by_name("ocd_gpio");
+
+ if (gpio < 0)
+ return NULL;
+
+ pdata.gpio = gpio;
+ msic_pdata.ocd = &pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
static const struct devs_id __initconst device_ids[] = {
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
@@ -491,7 +615,14 @@
{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
- {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+
+ /* MSIC subdevices */
+ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
+ {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
+ {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
+ {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
+ {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+
{},
};
@@ -558,6 +689,9 @@
i2c_devs[i2c_next_dev++] = new_dev;
}
+BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
/* Called by IPC driver */
void intel_scu_devices_create(void)
{
@@ -582,6 +716,7 @@
} else
i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
}
+ intel_scu_notifier_post(SCU_AVAILABLE, 0L);
}
EXPORT_SYMBOL_GPL(intel_scu_devices_create);
@@ -590,6 +725,8 @@
{
int i;
+ intel_scu_notifier_post(SCU_DOWN, 0L);
+
for (i = 0; i < ipc_next_dev; i++)
platform_device_del(ipc_devs[i]);
}
@@ -606,19 +743,37 @@
platform_device_add_resources(pdev, &res, 1);
}
-static void __init sfi_handle_ipc_dev(struct platform_device *pdev)
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
{
const struct devs_id *dev = device_ids;
+ struct platform_device *pdev;
void *pdata = NULL;
while (dev->name[0]) {
if (dev->type == SFI_DEV_TYPE_IPC &&
- !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(pdev);
+ !strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(entry);
break;
}
dev++;
}
+
+ /*
+ * On Medfield the platform device creation is handled by the MSIC
+ * MFD driver so we don't need to do it here.
+ */
+ if (mrst_has_msic())
+ return;
+
+ /* ID as IRQ is a hack that will go away */
+ pdev = platform_device_alloc(entry->name, entry->irq);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ entry->name);
+ return;
+ }
+ install_irq_resource(pdev, entry->irq);
+
pdev->dev.platform_data = pdata;
intel_scu_device_register(pdev);
}
@@ -671,7 +826,6 @@
struct sfi_device_table_entry *pentry;
struct spi_board_info spi_info;
struct i2c_board_info i2c_info;
- struct platform_device *pdev;
int num, i, bus;
int ioapic;
struct io_apic_irq_attr irq_attr;
@@ -699,17 +853,9 @@
switch (pentry->type) {
case SFI_DEV_TYPE_IPC:
- /* ID as IRQ is a hack that will go away */
- pdev = platform_device_alloc(pentry->name, irq);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- continue;
- }
- install_irq_resource(pdev, irq);
pr_debug("info[%2d]: IPC bus, name = %16.16s, "
- "irq = 0x%2x\n", i, pentry->name, irq);
- sfi_handle_ipc_dev(pdev);
+ "irq = 0x%2x\n", i, pentry->name, pentry->irq);
+ sfi_handle_ipc_dev(pentry);
break;
case SFI_DEV_TYPE_SPI:
memset(&spi_info, 0, sizeof(spi_info));
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index db8b915..5b55219 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -115,9 +115,6 @@
/* base pnode in this partition */
static int uv_base_pnode __read_mostly;
-/* position of pnode (which is nasid>>1): */
-static int uv_nshift __read_mostly;
-static unsigned long uv_mmask __read_mostly;
static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
static DEFINE_PER_CPU(struct bau_control, bau_control);
@@ -1435,7 +1432,7 @@
{
int i;
int cpu;
- unsigned long pa;
+ unsigned long gpa;
unsigned long m;
unsigned long n;
size_t dsize;
@@ -1451,9 +1448,9 @@
bau_desc = kmalloc_node(dsize, GFP_KERNEL, node);
BUG_ON(!bau_desc);
- pa = uv_gpa(bau_desc); /* need the real nasid*/
- n = pa >> uv_nshift;
- m = pa & uv_mmask;
+ gpa = uv_gpa(bau_desc);
+ n = uv_gpa_to_gnode(gpa);
+ m = uv_gpa_to_offset(gpa);
/* the 14-bit pnode */
write_mmr_descriptor_base(pnode, (n << UV_DESC_PSHIFT | m));
@@ -1525,9 +1522,9 @@
bcp->queue_last = pqp + (DEST_Q_SIZE - 1);
}
/*
- * need the pnode of where the memory was really allocated
+ * need the gnode of where the memory was really allocated
*/
- pn = uv_gpa(pqp) >> uv_nshift;
+ pn = uv_gpa_to_gnode(uv_gpa(pqp));
first = uv_physnodeaddr(pqp);
pn_first = ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | first;
last = uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1));
@@ -1837,8 +1834,6 @@
zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
}
- uv_nshift = uv_hub_info->m_val;
- uv_mmask = (1UL << uv_hub_info->m_val) - 1;
nuvhubs = uv_num_possible_blades();
spin_lock_init(&disable_lock);
congested_cycles = usec_2_cycles(congested_respns_us);
diff --git a/arch/um/Kconfig.x86 b/arch/x86/um/Kconfig
similarity index 100%
rename from arch/um/Kconfig.x86
rename to arch/x86/um/Kconfig
diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
new file mode 100644
index 0000000..8fb5840
--- /dev/null
+++ b/arch/x86/um/Makefile
@@ -0,0 +1,45 @@
+#
+# Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+#
+
+ifeq ($(CONFIG_X86_32),y)
+ BITS := 32
+else
+ BITS := 64
+endif
+
+obj-y = bug.o bugs_$(BITS).o delay.o fault.o ksyms.o ldt.o \
+ ptrace_$(BITS).o ptrace_user.o setjmp_$(BITS).o signal.o \
+ stub_$(BITS).o stub_segv.o syscalls_$(BITS).o \
+ sys_call_table_$(BITS).o sysrq_$(BITS).o tls_$(BITS).o \
+ mem_$(BITS).o subarch.o os-$(OS)/
+
+ifeq ($(CONFIG_X86_32),y)
+
+obj-y += checksum_32.o
+obj-$(CONFIG_BINFMT_ELF) += elfcore.o
+
+subarch-y = ../lib/string_32.o ../lib/atomic64_32.o ../lib/atomic64_cx8_32.o
+subarch-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += ../lib/rwsem.o
+subarch-$(CONFIG_HIGHMEM) += ../mm/highmem_32.o
+
+else
+
+obj-y += vdso/
+
+subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../lib/thunk_64.o \
+ ../lib/rwsem.o
+
+endif
+
+subarch-$(CONFIG_MODULES) += ../kernel/module.o
+
+USER_OBJS := bugs_$(BITS).o ptrace_user.o fault.o
+
+extra-y += user-offsets.s
+$(obj)/user-offsets.s: c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS)
+
+UNPROFILE_OBJS := stub_segv.o
+CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
+
+include arch/um/scripts/Makefile.rules
diff --git a/arch/um/include/asm/apic.h b/arch/x86/um/asm/apic.h
similarity index 100%
rename from arch/um/include/asm/apic.h
rename to arch/x86/um/asm/apic.h
diff --git a/arch/um/include/asm/arch_hweight.h b/arch/x86/um/asm/arch_hweight.h
similarity index 100%
rename from arch/um/include/asm/arch_hweight.h
rename to arch/x86/um/asm/arch_hweight.h
diff --git a/arch/x86/um/asm/archparam.h b/arch/x86/um/asm/archparam.h
new file mode 100644
index 0000000..c17cf68
--- /dev/null
+++ b/arch/x86/um/asm/archparam.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_ARCHPARAM_H
+#define __UM_ARCHPARAM_H
+
+#ifdef CONFIG_X86_32
+
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#endif
+
+#endif
diff --git a/arch/x86/um/asm/checksum.h b/arch/x86/um/asm/checksum.h
new file mode 100644
index 0000000..b6efe23
--- /dev/null
+++ b/arch/x86/um/asm/checksum.h
@@ -0,0 +1,10 @@
+#ifndef __UM_CHECKSUM_H
+#define __UM_CHECKSUM_H
+
+#ifdef CONFIG_X86_32
+# include "checksum_32.h"
+#else
+# include "checksum_64.h"
+#endif
+
+#endif
diff --git a/arch/x86/um/asm/checksum_32.h b/arch/x86/um/asm/checksum_32.h
new file mode 100644
index 0000000..caab742
--- /dev/null
+++ b/arch/x86/um/asm/checksum_32.h
@@ -0,0 +1,201 @@
+/*
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_SYSDEP_CHECKSUM_H
+#define __UM_SYSDEP_CHECKSUM_H
+
+#include "linux/in6.h"
+#include "linux/string.h"
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * Note: when you get a NULL pointer exception here this means someone
+ * passed in an incorrect kernel address to one of these functions.
+ *
+ * If you use these functions directly please don't forget the
+ * access_ok().
+ */
+
+static __inline__
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum)
+{
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+static __inline__
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *err_ptr)
+{
+ if (copy_from_user(dst, src, len)) {
+ *err_ptr = -EFAULT;
+ return (__force __wsum)-1;
+ }
+
+ return csum_partial(dst, len, sum);
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ *
+ * By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ * Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ unsigned int sum;
+
+ __asm__ __volatile__(
+ "movl (%1), %0 ;\n"
+ "subl $4, %2 ;\n"
+ "jbe 2f ;\n"
+ "addl 4(%1), %0 ;\n"
+ "adcl 8(%1), %0 ;\n"
+ "adcl 12(%1), %0 ;\n"
+"1: adcl 16(%1), %0 ;\n"
+ "lea 4(%1), %1 ;\n"
+ "decl %2 ;\n"
+ "jne 1b ;\n"
+ "adcl $0, %0 ;\n"
+ "movl %0, %2 ;\n"
+ "shrl $16, %0 ;\n"
+ "addw %w2, %w0 ;\n"
+ "adcl $0, %0 ;\n"
+ "notl %0 ;\n"
+"2: ;\n"
+ /* Since the input registers which are loaded with iph and ipl
+ are modified, we must also specify them as outputs, or gcc
+ will assume they contain their original values. */
+ : "=r" (sum), "=r" (iph), "=r" (ihl)
+ : "1" (iph), "2" (ihl)
+ : "memory");
+ return (__force __sum16)sum;
+}
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ __asm__(
+ "addl %1, %0 ;\n"
+ "adcl $0xffff, %0 ;\n"
+ : "=r" (sum)
+ : "r" ((__force u32)sum << 16),
+ "0" ((__force u32)sum & 0xffff0000)
+ );
+ return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ __asm__(
+ "addl %1, %0 ;\n"
+ "adcl %2, %0 ;\n"
+ "adcl %3, %0 ;\n"
+ "adcl $0, %0 ;\n"
+ : "=r" (sum)
+ : "g" (daddr), "g"(saddr), "g"((len + proto) << 8), "0"(sum));
+ return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+ return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
+ __u32 len, unsigned short proto,
+ __wsum sum)
+{
+ __asm__(
+ "addl 0(%1), %0 ;\n"
+ "adcl 4(%1), %0 ;\n"
+ "adcl 8(%1), %0 ;\n"
+ "adcl 12(%1), %0 ;\n"
+ "adcl 0(%2), %0 ;\n"
+ "adcl 4(%2), %0 ;\n"
+ "adcl 8(%2), %0 ;\n"
+ "adcl 12(%2), %0 ;\n"
+ "adcl %3, %0 ;\n"
+ "adcl %4, %0 ;\n"
+ "adcl $0, %0 ;\n"
+ : "=&r" (sum)
+ : "r" (saddr), "r" (daddr),
+ "r"(htonl(len)), "r"(htonl(proto)), "0"(sum));
+
+ return csum_fold(sum);
+}
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static __inline__ __wsum csum_and_copy_to_user(const void *src,
+ void __user *dst,
+ int len, __wsum sum, int *err_ptr)
+{
+ if (access_ok(VERIFY_WRITE, dst, len)) {
+ if (copy_to_user(dst, src, len)) {
+ *err_ptr = -EFAULT;
+ return (__force __wsum)-1;
+ }
+
+ return csum_partial(src, len, sum);
+ }
+
+ if (len)
+ *err_ptr = -EFAULT;
+
+ return (__force __wsum)-1; /* invalid checksum */
+}
+
+#endif
+
diff --git a/arch/um/sys-x86_64/shared/sysdep/checksum.h b/arch/x86/um/asm/checksum_64.h
similarity index 100%
rename from arch/um/sys-x86_64/shared/sysdep/checksum.h
rename to arch/x86/um/asm/checksum_64.h
diff --git a/arch/um/include/asm/desc.h b/arch/x86/um/asm/desc.h
similarity index 100%
rename from arch/um/include/asm/desc.h
rename to arch/x86/um/asm/desc.h
diff --git a/arch/x86/um/asm/elf.h b/arch/x86/um/asm/elf.h
new file mode 100644
index 0000000..f3b0633
--- /dev/null
+++ b/arch/x86/um/asm/elf.h
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+#ifndef __UM_ELF_X86_H
+#define __UM_ELF_X86_H
+
+#include <asm/user.h>
+#include "skas.h"
+
+#ifdef CONFIG_X86_32
+
+#define R_386_NONE 0
+#define R_386_32 1
+#define R_386_PC32 2
+#define R_386_GOT32 3
+#define R_386_PLT32 4
+#define R_386_COPY 5
+#define R_386_GLOB_DAT 6
+#define R_386_JMP_SLOT 7
+#define R_386_RELATIVE 8
+#define R_386_GOTOFF 9
+#define R_386_GOTPC 10
+#define R_386_NUM 11
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
+
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_386
+
+#define ELF_PLAT_INIT(regs, load_addr) do { \
+ PT_REGS_EBX(regs) = 0; \
+ PT_REGS_ECX(regs) = 0; \
+ PT_REGS_EDX(regs) = 0; \
+ PT_REGS_ESI(regs) = 0; \
+ PT_REGS_EDI(regs) = 0; \
+ PT_REGS_EBP(regs) = 0; \
+ PT_REGS_EAX(regs) = 0; \
+} while (0)
+
+/* Shamelessly stolen from include/asm-i386/elf.h */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
+ pr_reg[0] = PT_REGS_EBX(regs); \
+ pr_reg[1] = PT_REGS_ECX(regs); \
+ pr_reg[2] = PT_REGS_EDX(regs); \
+ pr_reg[3] = PT_REGS_ESI(regs); \
+ pr_reg[4] = PT_REGS_EDI(regs); \
+ pr_reg[5] = PT_REGS_EBP(regs); \
+ pr_reg[6] = PT_REGS_EAX(regs); \
+ pr_reg[7] = PT_REGS_DS(regs); \
+ pr_reg[8] = PT_REGS_ES(regs); \
+ /* fake once used fs and gs selectors? */ \
+ pr_reg[9] = PT_REGS_DS(regs); \
+ pr_reg[10] = PT_REGS_DS(regs); \
+ pr_reg[11] = PT_REGS_SYSCALL_NR(regs); \
+ pr_reg[12] = PT_REGS_IP(regs); \
+ pr_reg[13] = PT_REGS_CS(regs); \
+ pr_reg[14] = PT_REGS_EFLAGS(regs); \
+ pr_reg[15] = PT_REGS_SP(regs); \
+ pr_reg[16] = PT_REGS_SS(regs); \
+} while (0);
+
+extern char * elf_aux_platform;
+#define ELF_PLATFORM (elf_aux_platform)
+
+extern unsigned long vsyscall_ehdr;
+extern unsigned long vsyscall_end;
+extern unsigned long __kernel_vsyscall;
+
+/*
+ * This is the range that is readable by user mode, and things
+ * acting like user mode such as get_user_pages.
+ */
+#define FIXADDR_USER_START vsyscall_ehdr
+#define FIXADDR_USER_END vsyscall_end
+
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#define AT_SYSINFO 32
+#define AT_SYSINFO_EHDR 33
+
+#define ARCH_DLINFO \
+do { \
+ if ( vsyscall_ehdr ) { \
+ NEW_AUX_ENT(AT_SYSINFO, __kernel_vsyscall); \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, vsyscall_ehdr); \
+ } \
+} while (0)
+
+#else
+
+/* x86-64 relocation types, taken from asm-x86_64/elf.h */
+#define R_X86_64_NONE 0 /* No reloc */
+#define R_X86_64_64 1 /* Direct 64 bit */
+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
+#define R_X86_64_PLT32 4 /* 32 bit PLT address */
+#define R_X86_64_COPY 5 /* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
+#define R_X86_64_RELATIVE 8 /* Adjust by program base */
+#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative
+ offset to GOT */
+#define R_X86_64_32 10 /* Direct 32 bit zero extended */
+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
+#define R_X86_64_16 12 /* Direct 16 bit zero extended */
+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
+#define R_X86_64_8 14 /* Direct 8 bit sign extended */
+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM 16
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ ((x)->e_machine == EM_X86_64)
+
+#define ELF_CLASS ELFCLASS64
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_X86_64
+
+#define ELF_PLAT_INIT(regs, load_addr) do { \
+ PT_REGS_RBX(regs) = 0; \
+ PT_REGS_RCX(regs) = 0; \
+ PT_REGS_RDX(regs) = 0; \
+ PT_REGS_RSI(regs) = 0; \
+ PT_REGS_RDI(regs) = 0; \
+ PT_REGS_RBP(regs) = 0; \
+ PT_REGS_RAX(regs) = 0; \
+ PT_REGS_R8(regs) = 0; \
+ PT_REGS_R9(regs) = 0; \
+ PT_REGS_R10(regs) = 0; \
+ PT_REGS_R11(regs) = 0; \
+ PT_REGS_R12(regs) = 0; \
+ PT_REGS_R13(regs) = 0; \
+ PT_REGS_R14(regs) = 0; \
+ PT_REGS_R15(regs) = 0; \
+} while (0)
+
+#define ELF_CORE_COPY_REGS(pr_reg, _regs) \
+ (pr_reg)[0] = (_regs)->regs.gp[0]; \
+ (pr_reg)[1] = (_regs)->regs.gp[1]; \
+ (pr_reg)[2] = (_regs)->regs.gp[2]; \
+ (pr_reg)[3] = (_regs)->regs.gp[3]; \
+ (pr_reg)[4] = (_regs)->regs.gp[4]; \
+ (pr_reg)[5] = (_regs)->regs.gp[5]; \
+ (pr_reg)[6] = (_regs)->regs.gp[6]; \
+ (pr_reg)[7] = (_regs)->regs.gp[7]; \
+ (pr_reg)[8] = (_regs)->regs.gp[8]; \
+ (pr_reg)[9] = (_regs)->regs.gp[9]; \
+ (pr_reg)[10] = (_regs)->regs.gp[10]; \
+ (pr_reg)[11] = (_regs)->regs.gp[11]; \
+ (pr_reg)[12] = (_regs)->regs.gp[12]; \
+ (pr_reg)[13] = (_regs)->regs.gp[13]; \
+ (pr_reg)[14] = (_regs)->regs.gp[14]; \
+ (pr_reg)[15] = (_regs)->regs.gp[15]; \
+ (pr_reg)[16] = (_regs)->regs.gp[16]; \
+ (pr_reg)[17] = (_regs)->regs.gp[17]; \
+ (pr_reg)[18] = (_regs)->regs.gp[18]; \
+ (pr_reg)[19] = (_regs)->regs.gp[19]; \
+ (pr_reg)[20] = (_regs)->regs.gp[20]; \
+ (pr_reg)[21] = current->thread.arch.fs; \
+ (pr_reg)[22] = 0; \
+ (pr_reg)[23] = 0; \
+ (pr_reg)[24] = 0; \
+ (pr_reg)[25] = 0; \
+ (pr_reg)[26] = 0;
+
+#define ELF_PLATFORM "x86_64"
+
+/* No user-accessible fixmap addresses, i.e. vsyscall */
+#define FIXADDR_USER_START 0
+#define FIXADDR_USER_END 0
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int uses_interp);
+
+extern unsigned long um_vdso_addr;
+#define AT_SYSINFO_EHDR 33
+#define ARCH_DLINFO NEW_AUX_ENT(AT_SYSINFO_EHDR, um_vdso_addr)
+
+#endif
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+#define task_pt_regs(t) (&(t)->thread.regs)
+
+struct task_struct;
+
+extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
+
+#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
+
+#define ELF_EXEC_PAGESIZE 4096
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+extern long elf_aux_hwcap;
+#define ELF_HWCAP (elf_aux_hwcap)
+
+#define SET_PERSONALITY(ex) do ; while(0)
+#define __HAVE_ARCH_GATE_AREA 1
+
+#endif
diff --git a/arch/um/include/asm/irq_vectors.h b/arch/x86/um/asm/irq_vectors.h
similarity index 100%
rename from arch/um/include/asm/irq_vectors.h
rename to arch/x86/um/asm/irq_vectors.h
diff --git a/arch/x86/um/asm/mm_context.h b/arch/x86/um/asm/mm_context.h
new file mode 100644
index 0000000..4a73d63
--- /dev/null
+++ b/arch/x86/um/asm/mm_context.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Licensed under the GPL
+ *
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ */
+
+#ifndef __ASM_LDT_H
+#define __ASM_LDT_H
+
+#include <linux/mutex.h>
+#include <asm/ldt.h>
+
+extern void ldt_host_info(void);
+
+#define LDT_PAGES_MAX \
+ ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
+#define LDT_ENTRIES_PER_PAGE \
+ (PAGE_SIZE/LDT_ENTRY_SIZE)
+#define LDT_DIRECT_ENTRIES \
+ ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
+
+struct ldt_entry {
+ __u32 a;
+ __u32 b;
+};
+
+typedef struct uml_ldt {
+ int entry_count;
+ struct mutex lock;
+ union {
+ struct ldt_entry * pages[LDT_PAGES_MAX];
+ struct ldt_entry entries[LDT_DIRECT_ENTRIES];
+ } u;
+} uml_ldt_t;
+
+#define LDT_entry_a(info) \
+ ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+ (((info)->base_addr & 0xff000000) | \
+ (((info)->base_addr & 0x00ff0000) >> 16) | \
+ ((info)->limit & 0xf0000) | \
+ (((info)->read_exec_only ^ 1) << 9) | \
+ ((info)->contents << 10) | \
+ (((info)->seg_not_present ^ 1) << 15) | \
+ ((info)->seg_32bit << 22) | \
+ ((info)->limit_in_pages << 23) | \
+ ((info)->useable << 20) | \
+ 0x7000)
+
+#define _LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 )
+
+#ifdef CONFIG_X86_64
+#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
+#else
+#define LDT_empty(info) (_LDT_empty(info))
+#endif
+
+struct uml_arch_mm_context {
+ uml_ldt_t ldt;
+};
+
+#endif
diff --git a/arch/x86/um/asm/module.h b/arch/x86/um/asm/module.h
new file mode 100644
index 0000000..61af80e
--- /dev/null
+++ b/arch/x86/um/asm/module.h
@@ -0,0 +1,23 @@
+#ifndef __UM_MODULE_H
+#define __UM_MODULE_H
+
+/* UML is simple */
+struct mod_arch_specific
+{
+};
+
+#ifdef CONFIG_X86_32
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#else
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+
+#endif
+
+#endif
diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h
new file mode 100644
index 0000000..118c143
--- /dev/null
+++ b/arch/x86/um/asm/processor.h
@@ -0,0 +1,22 @@
+#ifndef __UM_PROCESSOR_H
+#define __UM_PROCESSOR_H
+
+/* include faultinfo structure */
+#include <sysdep/faultinfo.h>
+
+#ifdef CONFIG_X86_32
+# include "processor_32.h"
+#else
+# include "processor_64.h"
+#endif
+
+#define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP)
+
+#define ARCH_IS_STACKGROW(address) \
+ (address + 65536 + 32 * sizeof(unsigned long) >= UPT_SP(¤t->thread.regs.regs))
+
+#include <asm/processor-generic.h>
+
+#endif
diff --git a/arch/x86/um/asm/processor_32.h b/arch/x86/um/asm/processor_32.h
new file mode 100644
index 0000000..018f732
--- /dev/null
+++ b/arch/x86/um/asm/processor_32.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_I386_H
+#define __UM_PROCESSOR_I386_H
+
+#include <linux/string.h>
+#include <asm/segment.h>
+#include <asm/ldt.h>
+
+extern int host_has_cmov;
+
+struct uml_tls_struct {
+ struct user_desc tls;
+ unsigned flushed:1;
+ unsigned present:1;
+};
+
+struct arch_thread {
+ struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+ unsigned long debugregs[8];
+ int debugregs_seq;
+ struct faultinfo faultinfo;
+};
+
+#define INIT_ARCH_THREAD { \
+ .tls_array = { [ 0 ... GDT_ENTRY_TLS_ENTRIES - 1 ] = \
+ { .present = 0, .flushed = 0 } }, \
+ .debugregs = { [ 0 ... 7 ] = 0 }, \
+ .debugregs_seq = 0, \
+ .faultinfo = { 0, 0, 0 } \
+}
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+ /* Clear any TLS still hanging */
+ memset(&thread->tls_array, 0, sizeof(thread->tls_array));
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+ struct arch_thread *to)
+{
+ memcpy(&to->tls_array, &from->tls_array, sizeof(from->tls_array));
+}
+
+#include <asm/user.h>
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+ __asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax() rep_nop()
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter"). Stolen
+ * from asm-i386/processor.h
+ */
+#define current_text_addr() \
+ ({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
+
+#endif
diff --git a/arch/x86/um/asm/processor_64.h b/arch/x86/um/asm/processor_64.h
new file mode 100644
index 0000000..61de92d
--- /dev/null
+++ b/arch/x86/um/asm/processor_64.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_X86_64_H
+#define __UM_PROCESSOR_X86_64_H
+
+struct arch_thread {
+ unsigned long debugregs[8];
+ int debugregs_seq;
+ unsigned long fs;
+ struct faultinfo faultinfo;
+};
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+ __asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax() rep_nop()
+
+#define INIT_ARCH_THREAD { .debugregs = { [ 0 ... 7 ] = 0 }, \
+ .debugregs_seq = 0, \
+ .fs = 0, \
+ .faultinfo = { 0, 0, 0 } }
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+ struct arch_thread *to)
+{
+ to->fs = from->fs;
+}
+
+#include <asm/user.h>
+
+#define current_text_addr() \
+ ({ void *pc; __asm__("movq $1f,%0\n1:":"=g" (pc)); pc; })
+
+#endif
diff --git a/arch/x86/um/asm/ptrace.h b/arch/x86/um/asm/ptrace.h
new file mode 100644
index 0000000..c8aca8c
--- /dev/null
+++ b/arch/x86/um/asm/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "ptrace_32.h"
+#else
+# include "ptrace_64.h"
+#endif
diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/x86/um/asm/ptrace_32.h
similarity index 100%
rename from arch/um/sys-i386/asm/ptrace.h
rename to arch/x86/um/asm/ptrace_32.h
diff --git a/arch/x86/um/asm/ptrace_64.h b/arch/x86/um/asm/ptrace_64.h
new file mode 100644
index 0000000..706a0d8
--- /dev/null
+++ b/arch/x86/um/asm/ptrace_64.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_X86_64_H
+#define __UM_PTRACE_X86_64_H
+
+#include "linux/compiler.h"
+#include "asm/errno.h"
+
+#define __FRAME_OFFSETS /* Needed to get the R* macros */
+#include "asm/ptrace-generic.h"
+
+#define HOST_AUDIT_ARCH AUDIT_ARCH_X86_64
+
+#define PT_REGS_RBX(r) UPT_RBX(&(r)->regs)
+#define PT_REGS_RCX(r) UPT_RCX(&(r)->regs)
+#define PT_REGS_RDX(r) UPT_RDX(&(r)->regs)
+#define PT_REGS_RSI(r) UPT_RSI(&(r)->regs)
+#define PT_REGS_RDI(r) UPT_RDI(&(r)->regs)
+#define PT_REGS_RBP(r) UPT_RBP(&(r)->regs)
+#define PT_REGS_RAX(r) UPT_RAX(&(r)->regs)
+#define PT_REGS_R8(r) UPT_R8(&(r)->regs)
+#define PT_REGS_R9(r) UPT_R9(&(r)->regs)
+#define PT_REGS_R10(r) UPT_R10(&(r)->regs)
+#define PT_REGS_R11(r) UPT_R11(&(r)->regs)
+#define PT_REGS_R12(r) UPT_R12(&(r)->regs)
+#define PT_REGS_R13(r) UPT_R13(&(r)->regs)
+#define PT_REGS_R14(r) UPT_R14(&(r)->regs)
+#define PT_REGS_R15(r) UPT_R15(&(r)->regs)
+
+#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
+#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
+#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
+#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
+#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
+#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
+
+#define PT_REGS_ORIG_RAX(r) UPT_ORIG_RAX(&(r)->regs)
+#define PT_REGS_RIP(r) UPT_IP(&(r)->regs)
+#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
+
+#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
+
+/* XXX */
+#define user_mode(r) UPT_IS_USER(&(r)->regs)
+#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_RAX(r)
+#define PT_REGS_SYSCALL_RET(r) PT_REGS_RAX(r)
+
+#define PT_FIX_EXEC_STACK(sp) do ; while(0)
+
+#define profile_pc(regs) PT_REGS_IP(regs)
+
+struct user_desc;
+
+static inline int ptrace_get_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ return -ENOSYS;
+}
+
+static inline int ptrace_set_thread_area(struct task_struct *child, int idx,
+ struct user_desc __user *user_desc)
+{
+ return -ENOSYS;
+}
+
+extern long arch_prctl(struct task_struct *task, int code,
+ unsigned long __user *addr);
+#endif
diff --git a/arch/um/include/asm/required-features.h b/arch/x86/um/asm/required-features.h
similarity index 100%
rename from arch/um/include/asm/required-features.h
rename to arch/x86/um/asm/required-features.h
diff --git a/arch/um/include/asm/segment.h b/arch/x86/um/asm/segment.h
similarity index 100%
rename from arch/um/include/asm/segment.h
rename to arch/x86/um/asm/segment.h
diff --git a/arch/x86/um/asm/system.h b/arch/x86/um/asm/system.h
new file mode 100644
index 0000000..a459fd9
--- /dev/null
+++ b/arch/x86/um/asm/system.h
@@ -0,0 +1,135 @@
+#ifndef _ASM_X86_SYSTEM_H_
+#define _ASM_X86_SYSTEM_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+void default_idle(void);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() asm volatile("mfence":::"memory")
+#define rmb() asm volatile("lfence":::"memory")
+#define wmb() asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier. All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads. This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies. See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * b = 2;
+ * memory_barrier();
+ * p = &b; q = p;
+ * read_barrier_depends();
+ * d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends(). However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * a = 2;
+ * memory_barrier();
+ * b = 3; y = b;
+ * read_barrier_depends();
+ * x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b". Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends() do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb() rmb()
+#else
+# define smp_rmb() barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() wmb()
+#else
+# define smp_wmb() barrier()
+#endif
+#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+ alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+ alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+extern void *_switch_to(void *prev, void *next, void *last);
+#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
+
+#endif
diff --git a/arch/x86/um/asm/vm-flags.h b/arch/x86/um/asm/vm-flags.h
new file mode 100644
index 0000000..7c297e9
--- /dev/null
+++ b/arch/x86/um/asm/vm-flags.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __VM_FLAGS_X86_H
+#define __VM_FLAGS_X86_H
+
+#ifdef CONFIG_X86_32
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#else
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_STACK_DEFAULT_FLAGS (VM_GROWSDOWN | VM_READ | VM_WRITE | \
+ VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif
+#endif
diff --git a/arch/um/sys-x86_64/bug.c b/arch/x86/um/bug.c
similarity index 100%
rename from arch/um/sys-x86_64/bug.c
rename to arch/x86/um/bug.c
diff --git a/arch/x86/um/bugs_32.c b/arch/x86/um/bugs_32.c
new file mode 100644
index 0000000..a1fba5f
--- /dev/null
+++ b/arch/x86/um/bugs_32.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#include <signal.h>
+#include "kern_util.h"
+#include "longjmp.h"
+#include "sysdep/ptrace.h"
+#include <generated/asm-offsets.h>
+
+/* Set during early boot */
+static int host_has_cmov = 1;
+static jmp_buf cmov_test_return;
+
+#define TASK_PID(task) *((int *) &(((char *) (task))[HOST_TASK_PID]))
+
+static void cmov_sigill_test_handler(int sig)
+{
+ host_has_cmov = 0;
+ longjmp(cmov_test_return, 1);
+}
+
+void arch_check_bugs(void)
+{
+ struct sigaction old, new;
+
+ printk(UM_KERN_INFO "Checking for host processor cmov support...");
+ new.sa_handler = cmov_sigill_test_handler;
+
+ /* Make sure that SIGILL is enabled after the handler longjmps back */
+ new.sa_flags = SA_NODEFER;
+ sigemptyset(&new.sa_mask);
+ sigaction(SIGILL, &new, &old);
+
+ if (setjmp(cmov_test_return) == 0) {
+ unsigned long foo = 0;
+ __asm__ __volatile__("cmovz %0, %1" : "=r" (foo) : "0" (foo));
+ printk(UM_KERN_CONT "Yes\n");
+ } else
+ printk(UM_KERN_CONT "No\n");
+
+ sigaction(SIGILL, &old, &new);
+}
+
+void arch_examine_signal(int sig, struct uml_pt_regs *regs)
+{
+ unsigned char tmp[2];
+
+ /*
+ * This is testing for a cmov (0x0f 0x4x) instruction causing a
+ * SIGILL in init.
+ */
+ if ((sig != SIGILL) || (TASK_PID(get_current()) != 1))
+ return;
+
+ if (copy_from_user_proc(tmp, (void *) UPT_IP(regs), 2)) {
+ printk(UM_KERN_ERR "SIGILL in init, could not read "
+ "instructions!\n");
+ return;
+ }
+
+ if ((tmp[0] != 0x0f) || ((tmp[1] & 0xf0) != 0x40))
+ return;
+
+ if (host_has_cmov == 0)
+ printk(UM_KERN_ERR "SIGILL caused by cmov, which this "
+ "processor doesn't implement. Boot a filesystem "
+ "compiled for older processors");
+ else if (host_has_cmov == 1)
+ printk(UM_KERN_ERR "SIGILL caused by cmov, which this "
+ "processor claims to implement");
+ else
+ printk(UM_KERN_ERR "Bad value for host_has_cmov (%d)",
+ host_has_cmov);
+}
diff --git a/arch/um/sys-x86_64/bugs.c b/arch/x86/um/bugs_64.c
similarity index 100%
rename from arch/um/sys-x86_64/bugs.c
rename to arch/x86/um/bugs_64.c
diff --git a/arch/um/sys-i386/checksum.S b/arch/x86/um/checksum_32.S
similarity index 100%
rename from arch/um/sys-i386/checksum.S
rename to arch/x86/um/checksum_32.S
diff --git a/arch/um/sys-i386/delay.c b/arch/x86/um/delay.c
similarity index 100%
rename from arch/um/sys-i386/delay.c
rename to arch/x86/um/delay.c
diff --git a/arch/um/sys-i386/elfcore.c b/arch/x86/um/elfcore.c
similarity index 100%
rename from arch/um/sys-i386/elfcore.c
rename to arch/x86/um/elfcore.c
diff --git a/arch/um/sys-i386/fault.c b/arch/x86/um/fault.c
similarity index 100%
rename from arch/um/sys-i386/fault.c
rename to arch/x86/um/fault.c
diff --git a/arch/x86/um/ksyms.c b/arch/x86/um/ksyms.c
new file mode 100644
index 0000000..2e8f43e
--- /dev/null
+++ b/arch/x86/um/ksyms.c
@@ -0,0 +1,13 @@
+#include <linux/module.h>
+#include <asm/string.h>
+#include <asm/checksum.h>
+
+#ifndef CONFIG_X86_32
+/*XXX: we need them because they would be exported by x86_64 */
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+EXPORT_SYMBOL(memcpy);
+#else
+EXPORT_SYMBOL(__memcpy);
+#endif
+#endif
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/x86/um/ldt.c b/arch/x86/um/ldt.c
new file mode 100644
index 0000000..26b0e39
--- /dev/null
+++ b/arch/x86/um/ldt.c
@@ -0,0 +1,502 @@
+/*
+ * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/unistd.h>
+#include "os.h"
+#include "proc_mm.h"
+#include "skas.h"
+#include "skas_ptrace.h"
+#include "sysdep/tls.h"
+
+extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
+
+static long write_ldt_entry(struct mm_id *mm_idp, int func,
+ struct user_desc *desc, void **addr, int done)
+{
+ long res;
+
+ if (proc_mm) {
+ /*
+ * This is a special handling for the case, that the mm to
+ * modify isn't current->active_mm.
+ * If this is called directly by modify_ldt,
+ * (current->active_mm->context.skas.u == mm_idp)
+ * will be true. So no call to __switch_mm(mm_idp) is done.
+ * If this is called in case of init_new_ldt or PTRACE_LDT,
+ * mm_idp won't belong to current->active_mm, but child->mm.
+ * So we need to switch child's mm into our userspace, then
+ * later switch back.
+ *
+ * Note: I'm unsure: should interrupts be disabled here?
+ */
+ if (!current->active_mm || current->active_mm == &init_mm ||
+ mm_idp != ¤t->active_mm->context.id)
+ __switch_mm(mm_idp);
+ }
+
+ if (ptrace_ldt) {
+ struct ptrace_ldt ldt_op = (struct ptrace_ldt) {
+ .func = func,
+ .ptr = desc,
+ .bytecount = sizeof(*desc)};
+ u32 cpu;
+ int pid;
+
+ if (!proc_mm)
+ pid = mm_idp->u.pid;
+ else {
+ cpu = get_cpu();
+ pid = userspace_pid[cpu];
+ }
+
+ res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op);
+
+ if (proc_mm)
+ put_cpu();
+ }
+ else {
+ void *stub_addr;
+ res = syscall_stub_data(mm_idp, (unsigned long *)desc,
+ (sizeof(*desc) + sizeof(long) - 1) &
+ ~(sizeof(long) - 1),
+ addr, &stub_addr);
+ if (!res) {
+ unsigned long args[] = { func,
+ (unsigned long)stub_addr,
+ sizeof(*desc),
+ 0, 0, 0 };
+ res = run_syscall_stub(mm_idp, __NR_modify_ldt, args,
+ 0, addr, done);
+ }
+ }
+
+ if (proc_mm) {
+ /*
+ * This is the second part of special handling, that makes
+ * PTRACE_LDT possible to implement.
+ */
+ if (current->active_mm && current->active_mm != &init_mm &&
+ mm_idp != ¤t->active_mm->context.id)
+ __switch_mm(¤t->active_mm->context.id);
+ }
+
+ return res;
+}
+
+static long read_ldt_from_host(void __user * ptr, unsigned long bytecount)
+{
+ int res, n;
+ struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) {
+ .func = 0,
+ .bytecount = bytecount,
+ .ptr = kmalloc(bytecount, GFP_KERNEL)};
+ u32 cpu;
+
+ if (ptrace_ldt.ptr == NULL)
+ return -ENOMEM;
+
+ /*
+ * This is called from sys_modify_ldt only, so userspace_pid gives
+ * us the right number
+ */
+
+ cpu = get_cpu();
+ res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt);
+ put_cpu();
+ if (res < 0)
+ goto out;
+
+ n = copy_to_user(ptr, ptrace_ldt.ptr, res);
+ if (n != 0)
+ res = -EFAULT;
+
+ out:
+ kfree(ptrace_ldt.ptr);
+
+ return res;
+}
+
+/*
+ * In skas mode, we hold our own ldt data in UML.
+ * Thus, the code implementing sys_modify_ldt_skas
+ * is very similar to (and mostly stolen from) sys_modify_ldt
+ * for arch/i386/kernel/ldt.c
+ * The routines copied and modified in part are:
+ * - read_ldt
+ * - read_default_ldt
+ * - write_ldt
+ * - sys_modify_ldt_skas
+ */
+
+static int read_ldt(void __user * ptr, unsigned long bytecount)
+{
+ int i, err = 0;
+ unsigned long size;
+ uml_ldt_t *ldt = ¤t->mm->context.arch.ldt;
+
+ if (!ldt->entry_count)
+ goto out;
+ if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
+ bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
+ err = bytecount;
+
+ if (ptrace_ldt)
+ return read_ldt_from_host(ptr, bytecount);
+
+ mutex_lock(&ldt->lock);
+ if (ldt->entry_count <= LDT_DIRECT_ENTRIES) {
+ size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES;
+ if (size > bytecount)
+ size = bytecount;
+ if (copy_to_user(ptr, ldt->u.entries, size))
+ err = -EFAULT;
+ bytecount -= size;
+ ptr += size;
+ }
+ else {
+ for (i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount;
+ i++) {
+ size = PAGE_SIZE;
+ if (size > bytecount)
+ size = bytecount;
+ if (copy_to_user(ptr, ldt->u.pages[i], size)) {
+ err = -EFAULT;
+ break;
+ }
+ bytecount -= size;
+ ptr += size;
+ }
+ }
+ mutex_unlock(&ldt->lock);
+
+ if (bytecount == 0 || err == -EFAULT)
+ goto out;
+
+ if (clear_user(ptr, bytecount))
+ err = -EFAULT;
+
+out:
+ return err;
+}
+
+static int read_default_ldt(void __user * ptr, unsigned long bytecount)
+{
+ int err;
+
+ if (bytecount > 5*LDT_ENTRY_SIZE)
+ bytecount = 5*LDT_ENTRY_SIZE;
+
+ err = bytecount;
+ /*
+ * UML doesn't support lcall7 and lcall27.
+ * So, we don't really have a default ldt, but emulate
+ * an empty ldt of common host default ldt size.
+ */
+ if (clear_user(ptr, bytecount))
+ err = -EFAULT;
+
+ return err;
+}
+
+static int write_ldt(void __user * ptr, unsigned long bytecount, int func)
+{
+ uml_ldt_t *ldt = ¤t->mm->context.arch.ldt;
+ struct mm_id * mm_idp = ¤t->mm->context.id;
+ int i, err;
+ struct user_desc ldt_info;
+ struct ldt_entry entry0, *ldt_p;
+ void *addr = NULL;
+
+ err = -EINVAL;
+ if (bytecount != sizeof(ldt_info))
+ goto out;
+ err = -EFAULT;
+ if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
+ goto out;
+
+ err = -EINVAL;
+ if (ldt_info.entry_number >= LDT_ENTRIES)
+ goto out;
+ if (ldt_info.contents == 3) {
+ if (func == 1)
+ goto out;
+ if (ldt_info.seg_not_present == 0)
+ goto out;
+ }
+
+ if (!ptrace_ldt)
+ mutex_lock(&ldt->lock);
+
+ err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1);
+ if (err)
+ goto out_unlock;
+ else if (ptrace_ldt) {
+ /* With PTRACE_LDT available, this is used as a flag only */
+ ldt->entry_count = 1;
+ goto out;
+ }
+
+ if (ldt_info.entry_number >= ldt->entry_count &&
+ ldt_info.entry_number >= LDT_DIRECT_ENTRIES) {
+ for (i=ldt->entry_count/LDT_ENTRIES_PER_PAGE;
+ i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number;
+ i++) {
+ if (i == 0)
+ memcpy(&entry0, ldt->u.entries,
+ sizeof(entry0));
+ ldt->u.pages[i] = (struct ldt_entry *)
+ __get_free_page(GFP_KERNEL|__GFP_ZERO);
+ if (!ldt->u.pages[i]) {
+ err = -ENOMEM;
+ /* Undo the change in host */
+ memset(&ldt_info, 0, sizeof(ldt_info));
+ write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1);
+ goto out_unlock;
+ }
+ if (i == 0) {
+ memcpy(ldt->u.pages[0], &entry0,
+ sizeof(entry0));
+ memcpy(ldt->u.pages[0]+1, ldt->u.entries+1,
+ sizeof(entry0)*(LDT_DIRECT_ENTRIES-1));
+ }
+ ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE;
+ }
+ }
+ if (ldt->entry_count <= ldt_info.entry_number)
+ ldt->entry_count = ldt_info.entry_number + 1;
+
+ if (ldt->entry_count <= LDT_DIRECT_ENTRIES)
+ ldt_p = ldt->u.entries + ldt_info.entry_number;
+ else
+ ldt_p = ldt->u.pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] +
+ ldt_info.entry_number%LDT_ENTRIES_PER_PAGE;
+
+ if (ldt_info.base_addr == 0 && ldt_info.limit == 0 &&
+ (func == 1 || LDT_empty(&ldt_info))) {
+ ldt_p->a = 0;
+ ldt_p->b = 0;
+ }
+ else{
+ if (func == 1)
+ ldt_info.useable = 0;
+ ldt_p->a = LDT_entry_a(&ldt_info);
+ ldt_p->b = LDT_entry_b(&ldt_info);
+ }
+ err = 0;
+
+out_unlock:
+ mutex_unlock(&ldt->lock);
+out:
+ return err;
+}
+
+static long do_modify_ldt_skas(int func, void __user *ptr,
+ unsigned long bytecount)
+{
+ int ret = -ENOSYS;
+
+ switch (func) {
+ case 0:
+ ret = read_ldt(ptr, bytecount);
+ break;
+ case 1:
+ case 0x11:
+ ret = write_ldt(ptr, bytecount, func);
+ break;
+ case 2:
+ ret = read_default_ldt(ptr, bytecount);
+ break;
+ }
+ return ret;
+}
+
+static DEFINE_SPINLOCK(host_ldt_lock);
+static short dummy_list[9] = {0, -1};
+static short * host_ldt_entries = NULL;
+
+static void ldt_get_host_info(void)
+{
+ long ret;
+ struct ldt_entry * ldt;
+ short *tmp;
+ int i, size, k, order;
+
+ spin_lock(&host_ldt_lock);
+
+ if (host_ldt_entries != NULL) {
+ spin_unlock(&host_ldt_lock);
+ return;
+ }
+ host_ldt_entries = dummy_list+1;
+
+ spin_unlock(&host_ldt_lock);
+
+ for (i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++)
+ ;
+
+ ldt = (struct ldt_entry *)
+ __get_free_pages(GFP_KERNEL|__GFP_ZERO, order);
+ if (ldt == NULL) {
+ printk(KERN_ERR "ldt_get_host_info: couldn't allocate buffer "
+ "for host ldt\n");
+ return;
+ }
+
+ ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE);
+ if (ret < 0) {
+ printk(KERN_ERR "ldt_get_host_info: couldn't read host ldt\n");
+ goto out_free;
+ }
+ if (ret == 0) {
+ /* default_ldt is active, simply write an empty entry 0 */
+ host_ldt_entries = dummy_list;
+ goto out_free;
+ }
+
+ for (i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++) {
+ if (ldt[i].a != 0 || ldt[i].b != 0)
+ size++;
+ }
+
+ if (size < ARRAY_SIZE(dummy_list))
+ host_ldt_entries = dummy_list;
+ else {
+ size = (size + 1) * sizeof(dummy_list[0]);
+ tmp = kmalloc(size, GFP_KERNEL);
+ if (tmp == NULL) {
+ printk(KERN_ERR "ldt_get_host_info: couldn't allocate "
+ "host ldt list\n");
+ goto out_free;
+ }
+ host_ldt_entries = tmp;
+ }
+
+ for (i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++) {
+ if (ldt[i].a != 0 || ldt[i].b != 0)
+ host_ldt_entries[k++] = i;
+ }
+ host_ldt_entries[k] = -1;
+
+out_free:
+ free_pages((unsigned long)ldt, order);
+}
+
+long init_new_ldt(struct mm_context *new_mm, struct mm_context *from_mm)
+{
+ struct user_desc desc;
+ short * num_p;
+ int i;
+ long page, err=0;
+ void *addr = NULL;
+ struct proc_mm_op copy;
+
+
+ if (!ptrace_ldt)
+ mutex_init(&new_mm->arch.ldt.lock);
+
+ if (!from_mm) {
+ memset(&desc, 0, sizeof(desc));
+ /*
+ * We have to initialize a clean ldt.
+ */
+ if (proc_mm) {
+ /*
+ * If the new mm was created using proc_mm, host's
+ * default-ldt currently is assigned, which normally
+ * contains the call-gates for lcall7 and lcall27.
+ * To remove these gates, we simply write an empty
+ * entry as number 0 to the host.
+ */
+ err = write_ldt_entry(&new_mm->id, 1, &desc, &addr, 1);
+ }
+ else{
+ /*
+ * Now we try to retrieve info about the ldt, we
+ * inherited from the host. All ldt-entries found
+ * will be reset in the following loop
+ */
+ ldt_get_host_info();
+ for (num_p=host_ldt_entries; *num_p != -1; num_p++) {
+ desc.entry_number = *num_p;
+ err = write_ldt_entry(&new_mm->id, 1, &desc,
+ &addr, *(num_p + 1) == -1);
+ if (err)
+ break;
+ }
+ }
+ new_mm->arch.ldt.entry_count = 0;
+
+ goto out;
+ }
+
+ if (proc_mm) {
+ /*
+ * We have a valid from_mm, so we now have to copy the LDT of
+ * from_mm to new_mm, because using proc_mm an new mm with
+ * an empty/default LDT was created in new_mm()
+ */
+ copy = ((struct proc_mm_op) { .op = MM_COPY_SEGMENTS,
+ .u =
+ { .copy_segments =
+ from_mm->id.u.mm_fd } } );
+ i = os_write_file(new_mm->id.u.mm_fd, ©, sizeof(copy));
+ if (i != sizeof(copy))
+ printk(KERN_ERR "new_mm : /proc/mm copy_segments "
+ "failed, err = %d\n", -i);
+ }
+
+ if (!ptrace_ldt) {
+ /*
+ * Our local LDT is used to supply the data for
+ * modify_ldt(READLDT), if PTRACE_LDT isn't available,
+ * i.e., we have to use the stub for modify_ldt, which
+ * can't handle the big read buffer of up to 64kB.
+ */
+ mutex_lock(&from_mm->arch.ldt.lock);
+ if (from_mm->arch.ldt.entry_count <= LDT_DIRECT_ENTRIES)
+ memcpy(new_mm->arch.ldt.u.entries, from_mm->arch.ldt.u.entries,
+ sizeof(new_mm->arch.ldt.u.entries));
+ else {
+ i = from_mm->arch.ldt.entry_count / LDT_ENTRIES_PER_PAGE;
+ while (i-->0) {
+ page = __get_free_page(GFP_KERNEL|__GFP_ZERO);
+ if (!page) {
+ err = -ENOMEM;
+ break;
+ }
+ new_mm->arch.ldt.u.pages[i] =
+ (struct ldt_entry *) page;
+ memcpy(new_mm->arch.ldt.u.pages[i],
+ from_mm->arch.ldt.u.pages[i], PAGE_SIZE);
+ }
+ }
+ new_mm->arch.ldt.entry_count = from_mm->arch.ldt.entry_count;
+ mutex_unlock(&from_mm->arch.ldt.lock);
+ }
+
+ out:
+ return err;
+}
+
+
+void free_ldt(struct mm_context *mm)
+{
+ int i;
+
+ if (!ptrace_ldt && mm->arch.ldt.entry_count > LDT_DIRECT_ENTRIES) {
+ i = mm->arch.ldt.entry_count / LDT_ENTRIES_PER_PAGE;
+ while (i-- > 0)
+ free_page((long) mm->arch.ldt.u.pages[i]);
+ }
+ mm->arch.ldt.entry_count = 0;
+}
+
+int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
+{
+ return do_modify_ldt_skas(func, ptr, bytecount);
+}
diff --git a/arch/um/sys-i386/mem.c b/arch/x86/um/mem_32.c
similarity index 100%
rename from arch/um/sys-i386/mem.c
rename to arch/x86/um/mem_32.c
diff --git a/arch/um/sys-x86_64/mem.c b/arch/x86/um/mem_64.c
similarity index 100%
rename from arch/um/sys-x86_64/mem.c
rename to arch/x86/um/mem_64.c
diff --git a/arch/x86/um/os-Linux/Makefile b/arch/x86/um/os-Linux/Makefile
new file mode 100644
index 0000000..253bfb8
--- /dev/null
+++ b/arch/x86/um/os-Linux/Makefile
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+# Licensed under the GPL
+#
+
+obj-y = registers.o task_size.o mcontext.o
+
+obj-$(CONFIG_X86_32) += tls.o
+obj-$(CONFIG_64BIT) += prctl.o
+
+USER_OBJS := $(obj-y)
+
+include arch/um/scripts/Makefile.rules
diff --git a/arch/x86/um/os-Linux/mcontext.c b/arch/x86/um/os-Linux/mcontext.c
new file mode 100644
index 0000000..1d33d72
--- /dev/null
+++ b/arch/x86/um/os-Linux/mcontext.c
@@ -0,0 +1,31 @@
+#include <sys/ucontext.h>
+#define __FRAME_OFFSETS
+#include <asm/ptrace.h>
+#include <sysdep/ptrace.h>
+
+void get_regs_from_mc(struct uml_pt_regs *regs, mcontext_t *mc)
+{
+#ifdef __i386__
+#define COPY2(X,Y) regs->gp[X] = mc->gregs[REG_##Y]
+#define COPY(X) regs->gp[X] = mc->gregs[REG_##X]
+#define COPY_SEG(X) regs->gp[X] = mc->gregs[REG_##X] & 0xffff;
+#define COPY_SEG_CPL3(X) regs->gp[X] = (mc->gregs[REG_##X] & 0xffff) | 3;
+ COPY_SEG(GS); COPY_SEG(FS); COPY_SEG(ES); COPY_SEG(DS);
+ COPY(EDI); COPY(ESI); COPY(EBP);
+ COPY2(UESP, ESP); /* sic */
+ COPY(EBX); COPY(EDX); COPY(ECX); COPY(EAX);
+ COPY(EIP); COPY_SEG_CPL3(CS); COPY(EFL); COPY_SEG_CPL3(SS);
+#else
+#define COPY2(X,Y) regs->gp[X/sizeof(unsigned long)] = mc->gregs[REG_##Y]
+#define COPY(X) regs->gp[X/sizeof(unsigned long)] = mc->gregs[REG_##X]
+ COPY(R8); COPY(R9); COPY(R10); COPY(R11);
+ COPY(R12); COPY(R13); COPY(R14); COPY(R15);
+ COPY(RDI); COPY(RSI); COPY(RBP); COPY(RBX);
+ COPY(RDX); COPY(RAX); COPY(RCX); COPY(RSP);
+ COPY(RIP);
+ COPY2(EFLAGS, EFL);
+ COPY2(CS, CSGSFS);
+ regs->gp[CS / sizeof(unsigned long)] &= 0xffff;
+ regs->gp[CS / sizeof(unsigned long)] |= 3;
+#endif
+}
diff --git a/arch/um/os-Linux/sys-x86_64/prctl.c b/arch/x86/um/os-Linux/prctl.c
similarity index 100%
rename from arch/um/os-Linux/sys-x86_64/prctl.c
rename to arch/x86/um/os-Linux/prctl.c
diff --git a/arch/x86/um/os-Linux/registers.c b/arch/x86/um/os-Linux/registers.c
new file mode 100644
index 0000000..0cdbb86
--- /dev/null
+++ b/arch/x86/um/os-Linux/registers.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) 2004 PathScale, Inc
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#include <errno.h>
+#include <sys/ptrace.h>
+#ifdef __i386__
+#include <sys/user.h>
+#endif
+#include "longjmp.h"
+#include "sysdep/ptrace_user.h"
+
+int save_fp_registers(int pid, unsigned long *fp_regs)
+{
+ if (ptrace(PTRACE_GETFPREGS, pid, 0, fp_regs) < 0)
+ return -errno;
+ return 0;
+}
+
+int restore_fp_registers(int pid, unsigned long *fp_regs)
+{
+ if (ptrace(PTRACE_SETFPREGS, pid, 0, fp_regs) < 0)
+ return -errno;
+ return 0;
+}
+
+#ifdef __i386__
+int have_fpx_regs = 1;
+int save_fpx_registers(int pid, unsigned long *fp_regs)
+{
+ if (ptrace(PTRACE_GETFPXREGS, pid, 0, fp_regs) < 0)
+ return -errno;
+ return 0;
+}
+
+int restore_fpx_registers(int pid, unsigned long *fp_regs)
+{
+ if (ptrace(PTRACE_SETFPXREGS, pid, 0, fp_regs) < 0)
+ return -errno;
+ return 0;
+}
+
+int get_fp_registers(int pid, unsigned long *regs)
+{
+ if (have_fpx_regs)
+ return save_fpx_registers(pid, regs);
+ else
+ return save_fp_registers(pid, regs);
+}
+
+int put_fp_registers(int pid, unsigned long *regs)
+{
+ if (have_fpx_regs)
+ return restore_fpx_registers(pid, regs);
+ else
+ return restore_fp_registers(pid, regs);
+}
+
+void arch_init_registers(int pid)
+{
+ struct user_fpxregs_struct fpx_regs;
+ int err;
+
+ err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
+ if (!err)
+ return;
+
+ if (errno != EIO)
+ panic("check_ptrace : PTRACE_GETFPXREGS failed, errno = %d",
+ errno);
+
+ have_fpx_regs = 0;
+}
+#else
+
+int get_fp_registers(int pid, unsigned long *regs)
+{
+ return save_fp_registers(pid, regs);
+}
+
+int put_fp_registers(int pid, unsigned long *regs)
+{
+ return restore_fp_registers(pid, regs);
+}
+
+#endif
+
+unsigned long get_thread_reg(int reg, jmp_buf *buf)
+{
+ switch (reg) {
+#ifdef __i386__
+ case HOST_IP:
+ return buf[0]->__eip;
+ case HOST_SP:
+ return buf[0]->__esp;
+ case HOST_BP:
+ return buf[0]->__ebp;
+#else
+ case HOST_IP:
+ return buf[0]->__rip;
+ case HOST_SP:
+ return buf[0]->__rsp;
+ case HOST_BP:
+ return buf[0]->__rbp;
+#endif
+ default:
+ printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
+ reg);
+ return 0;
+ }
+}
diff --git a/arch/x86/um/os-Linux/task_size.c b/arch/x86/um/os-Linux/task_size.c
new file mode 100644
index 0000000..efb16c5
--- /dev/null
+++ b/arch/x86/um/os-Linux/task_size.c
@@ -0,0 +1,150 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <sys/mman.h>
+#include "longjmp.h"
+
+#ifdef __i386__
+
+static jmp_buf buf;
+
+static void segfault(int sig)
+{
+ longjmp(buf, 1);
+}
+
+static int page_ok(unsigned long page)
+{
+ unsigned long *address = (unsigned long *) (page << UM_KERN_PAGE_SHIFT);
+ unsigned long n = ~0UL;
+ void *mapped = NULL;
+ int ok = 0;
+
+ /*
+ * First see if the page is readable. If it is, it may still
+ * be a VDSO, so we go on to see if it's writable. If not
+ * then try mapping memory there. If that fails, then we're
+ * still in the kernel area. As a sanity check, we'll fail if
+ * the mmap succeeds, but gives us an address different from
+ * what we wanted.
+ */
+ if (setjmp(buf) == 0)
+ n = *address;
+ else {
+ mapped = mmap(address, UM_KERN_PAGE_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (mapped == MAP_FAILED)
+ return 0;
+ if (mapped != address)
+ goto out;
+ }
+
+ /*
+ * Now, is it writeable? If so, then we're in user address
+ * space. If not, then try mprotecting it and try the write
+ * again.
+ */
+ if (setjmp(buf) == 0) {
+ *address = n;
+ ok = 1;
+ goto out;
+ } else if (mprotect(address, UM_KERN_PAGE_SIZE,
+ PROT_READ | PROT_WRITE) != 0)
+ goto out;
+
+ if (setjmp(buf) == 0) {
+ *address = n;
+ ok = 1;
+ }
+
+ out:
+ if (mapped != NULL)
+ munmap(mapped, UM_KERN_PAGE_SIZE);
+ return ok;
+}
+
+unsigned long os_get_top_address(void)
+{
+ struct sigaction sa, old;
+ unsigned long bottom = 0;
+ /*
+ * A 32-bit UML on a 64-bit host gets confused about the VDSO at
+ * 0xffffe000. It is mapped, is readable, can be reprotected writeable
+ * and written. However, exec discovers later that it can't be
+ * unmapped. So, just set the highest address to be checked to just
+ * below it. This might waste some address space on 4G/4G 32-bit
+ * hosts, but shouldn't hurt otherwise.
+ */
+ unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
+ unsigned long test, original;
+
+ printf("Locating the bottom of the address space ... ");
+ fflush(stdout);
+
+ /*
+ * We're going to be longjmping out of the signal handler, so
+ * SA_DEFER needs to be set.
+ */
+ sa.sa_handler = segfault;
+ sigemptyset(&sa.sa_mask);
+ sa.sa_flags = SA_NODEFER;
+ if (sigaction(SIGSEGV, &sa, &old)) {
+ perror("os_get_top_address");
+ exit(1);
+ }
+
+ /* Manually scan the address space, bottom-up, until we find
+ * the first valid page (or run out of them).
+ */
+ for (bottom = 0; bottom < top; bottom++) {
+ if (page_ok(bottom))
+ break;
+ }
+
+ /* If we've got this far, we ran out of pages. */
+ if (bottom == top) {
+ fprintf(stderr, "Unable to determine bottom of address "
+ "space.\n");
+ exit(1);
+ }
+
+ printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
+ printf("Locating the top of the address space ... ");
+ fflush(stdout);
+
+ original = bottom;
+
+ /* This could happen with a 4G/4G split */
+ if (page_ok(top))
+ goto out;
+
+ do {
+ test = bottom + (top - bottom) / 2;
+ if (page_ok(test))
+ bottom = test;
+ else
+ top = test;
+ } while (top - bottom > 1);
+
+out:
+ /* Restore the old SIGSEGV handling */
+ if (sigaction(SIGSEGV, &old, NULL)) {
+ perror("os_get_top_address");
+ exit(1);
+ }
+ top <<= UM_KERN_PAGE_SHIFT;
+ printf("0x%x\n", top);
+
+ return top;
+}
+
+#else
+
+unsigned long os_get_top_address(void)
+{
+ /* The old value of CONFIG_TOP_ADDR */
+ return 0x7fc0000000;
+}
+
+#endif
diff --git a/arch/x86/um/os-Linux/tls.c b/arch/x86/um/os-Linux/tls.c
new file mode 100644
index 0000000..82276b6
--- /dev/null
+++ b/arch/x86/um/os-Linux/tls.c
@@ -0,0 +1,67 @@
+#include <errno.h>
+#include <linux/unistd.h>
+
+#include <sys/ptrace.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+
+#include "sysdep/tls.h"
+
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 25
+#endif
+
+#ifndef PTRACE_SET_THREAD_AREA
+#define PTRACE_SET_THREAD_AREA 26
+#endif
+
+/* Checks whether host supports TLS, and sets *tls_min according to the value
+ * valid on the host.
+ * i386 host have it == 6; x86_64 host have it == 12, for i386 emulation. */
+void check_host_supports_tls(int *supports_tls, int *tls_min)
+{
+ /* Values for x86 and x86_64.*/
+ int val[] = {GDT_ENTRY_TLS_MIN_I386, GDT_ENTRY_TLS_MIN_X86_64};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(val); i++) {
+ user_desc_t info;
+ info.entry_number = val[i];
+
+ if (syscall(__NR_get_thread_area, &info) == 0) {
+ *tls_min = val[i];
+ *supports_tls = 1;
+ return;
+ } else {
+ if (errno == EINVAL)
+ continue;
+ else if (errno == ENOSYS)
+ *supports_tls = 0;
+ return;
+ }
+ }
+
+ *supports_tls = 0;
+}
+
+int os_set_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_SET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
+
+int os_get_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_GET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
diff --git a/arch/x86/um/ptrace_32.c b/arch/x86/um/ptrace_32.c
new file mode 100644
index 0000000..3b949daa
--- /dev/null
+++ b/arch/x86/um/ptrace_32.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/mm.h"
+#include "linux/sched.h"
+#include "asm/uaccess.h"
+#include "skas.h"
+
+extern int arch_switch_tls(struct task_struct *to);
+
+void arch_switch_to(struct task_struct *to)
+{
+ int err = arch_switch_tls(to);
+ if (!err)
+ return;
+
+ if (err != -EINVAL)
+ printk(KERN_WARNING "arch_switch_tls failed, errno %d, "
+ "not EINVAL\n", -err);
+ else
+ printk(KERN_WARNING "arch_switch_tls failed, errno = EINVAL\n");
+}
+
+int is_syscall(unsigned long addr)
+{
+ unsigned short instr;
+ int n;
+
+ n = copy_from_user(&instr, (void __user *) addr, sizeof(instr));
+ if (n) {
+ /* access_process_vm() grants access to vsyscall and stub,
+ * while copy_from_user doesn't. Maybe access_process_vm is
+ * slow, but that doesn't matter, since it will be called only
+ * in case of singlestepping, if copy_from_user failed.
+ */
+ n = access_process_vm(current, addr, &instr, sizeof(instr), 0);
+ if (n != sizeof(instr)) {
+ printk(KERN_ERR "is_syscall : failed to read "
+ "instruction from 0x%lx\n", addr);
+ return 1;
+ }
+ }
+ /* int 0x80 or sysenter */
+ return (instr == 0x80cd) || (instr == 0x340f);
+}
+
+/* determines which flags the user has access to. */
+/* 1 = access 0 = no access */
+#define FLAG_MASK 0x00044dd5
+
+static const int reg_offsets[] = {
+ [EBX] = HOST_BX,
+ [ECX] = HOST_CX,
+ [EDX] = HOST_DX,
+ [ESI] = HOST_SI,
+ [EDI] = HOST_DI,
+ [EBP] = HOST_BP,
+ [EAX] = HOST_AX,
+ [DS] = HOST_DS,
+ [ES] = HOST_ES,
+ [FS] = HOST_FS,
+ [GS] = HOST_GS,
+ [EIP] = HOST_IP,
+ [CS] = HOST_CS,
+ [EFL] = HOST_EFLAGS,
+ [UESP] = HOST_SP,
+ [SS] = HOST_SS,
+};
+
+int putreg(struct task_struct *child, int regno, unsigned long value)
+{
+ regno >>= 2;
+ switch (regno) {
+ case EBX:
+ case ECX:
+ case EDX:
+ case ESI:
+ case EDI:
+ case EBP:
+ case EAX:
+ case EIP:
+ case UESP:
+ break;
+ case FS:
+ if (value && (value & 3) != 3)
+ return -EIO;
+ break;
+ case GS:
+ if (value && (value & 3) != 3)
+ return -EIO;
+ break;
+ case DS:
+ case ES:
+ if (value && (value & 3) != 3)
+ return -EIO;
+ value &= 0xffff;
+ break;
+ case SS:
+ case CS:
+ if ((value & 3) != 3)
+ return -EIO;
+ value &= 0xffff;
+ break;
+ case EFL:
+ value &= FLAG_MASK;
+ child->thread.regs.regs.gp[HOST_EFLAGS] |= value;
+ return 0;
+ case ORIG_EAX:
+ child->thread.regs.regs.syscall = value;
+ return 0;
+ default :
+ panic("Bad register in putreg() : %d\n", regno);
+ }
+ child->thread.regs.regs.gp[reg_offsets[regno]] = value;
+ return 0;
+}
+
+int poke_user(struct task_struct *child, long addr, long data)
+{
+ if ((addr & 3) || addr < 0)
+ return -EIO;
+
+ if (addr < MAX_REG_OFFSET)
+ return putreg(child, addr, data);
+ else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))) {
+ addr -= offsetof(struct user, u_debugreg[0]);
+ addr = addr >> 2;
+ if ((addr == 4) || (addr == 5))
+ return -EIO;
+ child->thread.arch.debugregs[addr] = data;
+ return 0;
+ }
+ return -EIO;
+}
+
+unsigned long getreg(struct task_struct *child, int regno)
+{
+ unsigned long mask = ~0UL;
+
+ regno >>= 2;
+ switch (regno) {
+ case ORIG_EAX:
+ return child->thread.regs.regs.syscall;
+ case FS:
+ case GS:
+ case DS:
+ case ES:
+ case SS:
+ case CS:
+ mask = 0xffff;
+ break;
+ case EIP:
+ case UESP:
+ case EAX:
+ case EBX:
+ case ECX:
+ case EDX:
+ case ESI:
+ case EDI:
+ case EBP:
+ case EFL:
+ break;
+ default:
+ panic("Bad register in getreg() : %d\n", regno);
+ }
+ return mask & child->thread.regs.regs.gp[reg_offsets[regno]];
+}
+
+/* read the word at location addr in the USER area. */
+int peek_user(struct task_struct *child, long addr, long data)
+{
+ unsigned long tmp;
+
+ if ((addr & 3) || addr < 0)
+ return -EIO;
+
+ tmp = 0; /* Default return condition */
+ if (addr < MAX_REG_OFFSET) {
+ tmp = getreg(child, addr);
+ }
+ else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))) {
+ addr -= offsetof(struct user, u_debugreg[0]);
+ addr = addr >> 2;
+ tmp = child->thread.arch.debugregs[addr];
+ }
+ return put_user(tmp, (unsigned long __user *) data);
+}
+
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+{
+ int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
+ struct user_i387_struct fpregs;
+
+ err = save_fp_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
+ if (err)
+ return err;
+
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
+ if(n > 0)
+ return -EFAULT;
+
+ return n;
+}
+
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+{
+ int n, cpu = ((struct thread_info *) child->stack)->cpu;
+ struct user_i387_struct fpregs;
+
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
+ if (n > 0)
+ return -EFAULT;
+
+ return restore_fp_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
+}
+
+static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+{
+ int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
+ struct user_fxsr_struct fpregs;
+
+ err = save_fpx_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
+ if (err)
+ return err;
+
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
+ if(n > 0)
+ return -EFAULT;
+
+ return n;
+}
+
+static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+{
+ int n, cpu = ((struct thread_info *) child->stack)->cpu;
+ struct user_fxsr_struct fpregs;
+
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
+ if (n > 0)
+ return -EFAULT;
+
+ return restore_fpx_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
+}
+
+long subarch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data)
+{
+ int ret = -EIO;
+ void __user *datap = (void __user *) data;
+ switch (request) {
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
+ ret = get_fpregs(datap, child);
+ break;
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
+ ret = set_fpregs(datap, child);
+ break;
+ case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+ ret = get_fpxregs(datap, child);
+ break;
+ case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+ ret = set_fpxregs(datap, child);
+ break;
+ default:
+ ret = -EIO;
+ }
+ return ret;
+}
diff --git a/arch/x86/um/ptrace_64.c b/arch/x86/um/ptrace_64.c
new file mode 100644
index 0000000..3b52bf0
--- /dev/null
+++ b/arch/x86/um/ptrace_64.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ *
+ * Licensed under the GPL
+ */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#define __FRAME_OFFSETS
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+/*
+ * determines which flags the user has access to.
+ * 1 = access 0 = no access
+ */
+#define FLAG_MASK 0x44dd5UL
+
+static const int reg_offsets[] =
+{
+ [R8 >> 3] = HOST_R8,
+ [R9 >> 3] = HOST_R9,
+ [R10 >> 3] = HOST_R10,
+ [R11 >> 3] = HOST_R11,
+ [R12 >> 3] = HOST_R12,
+ [R13 >> 3] = HOST_R13,
+ [R14 >> 3] = HOST_R14,
+ [R15 >> 3] = HOST_R15,
+ [RIP >> 3] = HOST_IP,
+ [RSP >> 3] = HOST_SP,
+ [RAX >> 3] = HOST_AX,
+ [RBX >> 3] = HOST_BX,
+ [RCX >> 3] = HOST_CX,
+ [RDX >> 3] = HOST_DX,
+ [RSI >> 3] = HOST_SI,
+ [RDI >> 3] = HOST_DI,
+ [RBP >> 3] = HOST_BP,
+ [CS >> 3] = HOST_CS,
+ [SS >> 3] = HOST_SS,
+ [FS_BASE >> 3] = HOST_FS_BASE,
+ [GS_BASE >> 3] = HOST_GS_BASE,
+ [DS >> 3] = HOST_DS,
+ [ES >> 3] = HOST_ES,
+ [FS >> 3] = HOST_FS,
+ [GS >> 3] = HOST_GS,
+ [EFLAGS >> 3] = HOST_EFLAGS,
+ [ORIG_RAX >> 3] = HOST_ORIG_AX,
+};
+
+int putreg(struct task_struct *child, int regno, unsigned long value)
+{
+#ifdef TIF_IA32
+ /*
+ * Some code in the 64bit emulation may not be 64bit clean.
+ * Don't take any chances.
+ */
+ if (test_tsk_thread_flag(child, TIF_IA32))
+ value &= 0xffffffff;
+#endif
+ switch (regno) {
+ case R8:
+ case R9:
+ case R10:
+ case R11:
+ case R12:
+ case R13:
+ case R14:
+ case R15:
+ case RIP:
+ case RSP:
+ case RAX:
+ case RBX:
+ case RCX:
+ case RDX:
+ case RSI:
+ case RDI:
+ case RBP:
+ case ORIG_RAX:
+ break;
+
+ case FS:
+ case GS:
+ case DS:
+ case ES:
+ case SS:
+ case CS:
+ if (value && (value & 3) != 3)
+ return -EIO;
+ value &= 0xffff;
+ break;
+
+ case FS_BASE:
+ case GS_BASE:
+ if (!((value >> 48) == 0 || (value >> 48) == 0xffff))
+ return -EIO;
+ break;
+
+ case EFLAGS:
+ value &= FLAG_MASK;
+ child->thread.regs.regs.gp[HOST_EFLAGS] |= value;
+ return 0;
+
+ default:
+ panic("Bad register in putreg(): %d\n", regno);
+ }
+
+ child->thread.regs.regs.gp[reg_offsets[regno >> 3]] = value;
+ return 0;
+}
+
+int poke_user(struct task_struct *child, long addr, long data)
+{
+ if ((addr & 3) || addr < 0)
+ return -EIO;
+
+ if (addr < MAX_REG_OFFSET)
+ return putreg(child, addr, data);
+ else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))) {
+ addr -= offsetof(struct user, u_debugreg[0]);
+ addr = addr >> 2;
+ if ((addr == 4) || (addr == 5))
+ return -EIO;
+ child->thread.arch.debugregs[addr] = data;
+ return 0;
+ }
+ return -EIO;
+}
+
+unsigned long getreg(struct task_struct *child, int regno)
+{
+ unsigned long mask = ~0UL;
+#ifdef TIF_IA32
+ if (test_tsk_thread_flag(child, TIF_IA32))
+ mask = 0xffffffff;
+#endif
+ switch (regno) {
+ case R8:
+ case R9:
+ case R10:
+ case R11:
+ case R12:
+ case R13:
+ case R14:
+ case R15:
+ case RIP:
+ case RSP:
+ case RAX:
+ case RBX:
+ case RCX:
+ case RDX:
+ case RSI:
+ case RDI:
+ case RBP:
+ case ORIG_RAX:
+ case EFLAGS:
+ case FS_BASE:
+ case GS_BASE:
+ break;
+ case FS:
+ case GS:
+ case DS:
+ case ES:
+ case SS:
+ case CS:
+ mask = 0xffff;
+ break;
+ default:
+ panic("Bad register in getreg: %d\n", regno);
+ }
+ return mask & child->thread.regs.regs.gp[reg_offsets[regno >> 3]];
+}
+
+int peek_user(struct task_struct *child, long addr, long data)
+{
+ /* read the word at location addr in the USER area. */
+ unsigned long tmp;
+
+ if ((addr & 3) || addr < 0)
+ return -EIO;
+
+ tmp = 0; /* Default return condition */
+ if (addr < MAX_REG_OFFSET)
+ tmp = getreg(child, addr);
+ else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))) {
+ addr -= offsetof(struct user, u_debugreg[0]);
+ addr = addr >> 2;
+ tmp = child->thread.arch.debugregs[addr];
+ }
+ return put_user(tmp, (unsigned long *) data);
+}
+
+/* XXX Mostly copied from sys-i386 */
+int is_syscall(unsigned long addr)
+{
+ unsigned short instr;
+ int n;
+
+ n = copy_from_user(&instr, (void __user *) addr, sizeof(instr));
+ if (n) {
+ /*
+ * access_process_vm() grants access to vsyscall and stub,
+ * while copy_from_user doesn't. Maybe access_process_vm is
+ * slow, but that doesn't matter, since it will be called only
+ * in case of singlestepping, if copy_from_user failed.
+ */
+ n = access_process_vm(current, addr, &instr, sizeof(instr), 0);
+ if (n != sizeof(instr)) {
+ printk("is_syscall : failed to read instruction from "
+ "0x%lx\n", addr);
+ return 1;
+ }
+ }
+ /* sysenter */
+ return instr == 0x050f;
+}
+
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+{
+ int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
+ long fpregs[HOST_FP_SIZE];
+
+ BUG_ON(sizeof(*buf) != sizeof(fpregs));
+ err = save_fp_registers(userspace_pid[cpu], fpregs);
+ if (err)
+ return err;
+
+ n = copy_to_user(buf, fpregs, sizeof(fpregs));
+ if (n > 0)
+ return -EFAULT;
+
+ return n;
+}
+
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+{
+ int n, cpu = ((struct thread_info *) child->stack)->cpu;
+ long fpregs[HOST_FP_SIZE];
+
+ BUG_ON(sizeof(*buf) != sizeof(fpregs));
+ n = copy_from_user(fpregs, buf, sizeof(fpregs));
+ if (n > 0)
+ return -EFAULT;
+
+ return restore_fp_registers(userspace_pid[cpu], fpregs);
+}
+
+long subarch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data)
+{
+ int ret = -EIO;
+ void __user *datap = (void __user *) data;
+
+ switch (request) {
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
+ ret = get_fpregs(datap, child);
+ break;
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
+ ret = set_fpregs(datap, child);
+ break;
+ case PTRACE_ARCH_PRCTL:
+ /* XXX Calls ptrace on the host - needs some SMP thinking */
+ ret = arch_prctl(child, data, (void __user *) addr);
+ break;
+ }
+
+ return ret;
+}
diff --git a/arch/x86/um/ptrace_user.c b/arch/x86/um/ptrace_user.c
new file mode 100644
index 0000000..3960ca1
--- /dev/null
+++ b/arch/x86/um/ptrace_user.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#include <errno.h>
+#include "ptrace_user.h"
+
+int ptrace_getregs(long pid, unsigned long *regs_out)
+{
+ if (ptrace(PTRACE_GETREGS, pid, 0, regs_out) < 0)
+ return -errno;
+ return 0;
+}
+
+int ptrace_setregs(long pid, unsigned long *regs)
+{
+ if (ptrace(PTRACE_SETREGS, pid, 0, regs) < 0)
+ return -errno;
+ return 0;
+}
diff --git a/arch/um/sys-i386/setjmp.S b/arch/x86/um/setjmp_32.S
similarity index 100%
rename from arch/um/sys-i386/setjmp.S
rename to arch/x86/um/setjmp_32.S
diff --git a/arch/um/sys-x86_64/setjmp.S b/arch/x86/um/setjmp_64.S
similarity index 100%
rename from arch/um/sys-x86_64/setjmp.S
rename to arch/x86/um/setjmp_64.S
diff --git a/arch/x86/um/shared/sysdep/archsetjmp.h b/arch/x86/um/shared/sysdep/archsetjmp.h
new file mode 100644
index 0000000..ff7766d
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/archsetjmp.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "archsetjmp_32.h"
+#else
+#include "archsetjmp_64.h"
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/archsetjmp.h b/arch/x86/um/shared/sysdep/archsetjmp_32.h
similarity index 100%
rename from arch/um/sys-i386/shared/sysdep/archsetjmp.h
rename to arch/x86/um/shared/sysdep/archsetjmp_32.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/archsetjmp.h b/arch/x86/um/shared/sysdep/archsetjmp_64.h
similarity index 100%
rename from arch/um/sys-x86_64/shared/sysdep/archsetjmp.h
rename to arch/x86/um/shared/sysdep/archsetjmp_64.h
diff --git a/arch/x86/um/shared/sysdep/faultinfo.h b/arch/x86/um/shared/sysdep/faultinfo.h
new file mode 100644
index 0000000..862ecb1
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/faultinfo.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "faultinfo_32.h"
+#else
+#include "faultinfo_64.h"
+#endif
diff --git a/arch/x86/um/shared/sysdep/faultinfo_32.h b/arch/x86/um/shared/sysdep/faultinfo_32.h
new file mode 100644
index 0000000..a26086b
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/faultinfo_32.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ * Licensed under the GPL
+ */
+
+#ifndef __FAULTINFO_I386_H
+#define __FAULTINFO_I386_H
+
+/* this structure contains the full arch-specific faultinfo
+ * from the traps.
+ * On i386, ptrace_faultinfo unfortunately doesn't provide
+ * all the info, since trap_no is missing.
+ * All common elements are defined at the same position in
+ * both structures, thus making it easy to copy the
+ * contents without knowledge about the structure elements.
+ */
+struct faultinfo {
+ int error_code; /* in ptrace_faultinfo misleadingly called is_write */
+ unsigned long cr2; /* in ptrace_faultinfo called addr */
+ int trap_no; /* missing in ptrace_faultinfo */
+};
+
+#define FAULT_WRITE(fi) ((fi).error_code & 2)
+#define FAULT_ADDRESS(fi) ((fi).cr2)
+
+/* This is Page Fault */
+#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
+
+/* SKAS3 has no trap_no on i386, but get_skas_faultinfo() sets it to 0. */
+#define SEGV_MAYBE_FIXABLE(fi) ((fi)->trap_no == 0 && ptrace_faultinfo)
+
+#define PTRACE_FULL_FAULTINFO 0
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/faultinfo_64.h b/arch/x86/um/shared/sysdep/faultinfo_64.h
new file mode 100644
index 0000000..f811cbe
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/faultinfo_64.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ * Licensed under the GPL
+ */
+
+#ifndef __FAULTINFO_X86_64_H
+#define __FAULTINFO_X86_64_H
+
+/* this structure contains the full arch-specific faultinfo
+ * from the traps.
+ * On i386, ptrace_faultinfo unfortunately doesn't provide
+ * all the info, since trap_no is missing.
+ * All common elements are defined at the same position in
+ * both structures, thus making it easy to copy the
+ * contents without knowledge about the structure elements.
+ */
+struct faultinfo {
+ int error_code; /* in ptrace_faultinfo misleadingly called is_write */
+ unsigned long cr2; /* in ptrace_faultinfo called addr */
+ int trap_no; /* missing in ptrace_faultinfo */
+};
+
+#define FAULT_WRITE(fi) ((fi).error_code & 2)
+#define FAULT_ADDRESS(fi) ((fi).cr2)
+
+/* This is Page Fault */
+#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
+
+/* No broken SKAS API, which doesn't pass trap_no, here. */
+#define SEGV_MAYBE_FIXABLE(fi) 0
+
+#define PTRACE_FULL_FAULTINFO 1
+
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/kernel-offsets.h b/arch/x86/um/shared/sysdep/kernel-offsets.h
similarity index 100%
rename from arch/um/sys-i386/shared/sysdep/kernel-offsets.h
rename to arch/x86/um/shared/sysdep/kernel-offsets.h
diff --git a/arch/x86/um/shared/sysdep/mcontext.h b/arch/x86/um/shared/sysdep/mcontext.h
new file mode 100644
index 0000000..b724c54
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/mcontext.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYS_SIGCONTEXT_X86_H
+#define __SYS_SIGCONTEXT_X86_H
+
+extern void get_regs_from_mc(struct uml_pt_regs *, mcontext_t *);
+
+#ifdef __i386__
+
+#define GET_FAULTINFO_FROM_MC(fi, mc) \
+ { \
+ (fi).cr2 = (mc)->cr2; \
+ (fi).error_code = (mc)->gregs[REG_ERR]; \
+ (fi).trap_no = (mc)->gregs[REG_TRAPNO]; \
+ }
+
+#else
+
+#define GET_FAULTINFO_FROM_MC(fi, mc) \
+ { \
+ (fi).cr2 = (mc)->gregs[REG_CR2]; \
+ (fi).error_code = (mc)->gregs[REG_ERR]; \
+ (fi).trap_no = (mc)->gregs[REG_TRAPNO]; \
+ }
+
+#endif
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace.h b/arch/x86/um/shared/sysdep/ptrace.h
new file mode 100644
index 0000000..711b162
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "ptrace_32.h"
+#else
+#include "ptrace_64.h"
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace_32.h b/arch/x86/um/shared/sysdep/ptrace_32.h
new file mode 100644
index 0000000..befd1df
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace_32.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_I386_PTRACE_H
+#define __SYSDEP_I386_PTRACE_H
+
+#include <generated/user_constants.h>
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+
+static inline void update_debugregs(int seq) {}
+
+/* syscall emulation path in ptrace */
+
+#ifndef PTRACE_SYSEMU
+#define PTRACE_SYSEMU 31
+#endif
+
+void set_using_sysemu(int value);
+int get_using_sysemu(void);
+extern int sysemu_supported;
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_EAX(r) ((r)[HOST_AX])
+#define REGS_EBX(r) ((r)[HOST_BX])
+#define REGS_ECX(r) ((r)[HOST_CX])
+#define REGS_EDX(r) ((r)[HOST_DX])
+#define REGS_ESI(r) ((r)[HOST_SI])
+#define REGS_EDI(r) ((r)[HOST_DI])
+#define REGS_EBP(r) ((r)[HOST_BP])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_SS(r) ((r)[HOST_SS])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
+
+#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#ifndef PTRACE_SYSEMU_SINGLESTEP
+#define PTRACE_SYSEMU_SINGLESTEP 32
+#endif
+
+struct uml_pt_regs {
+ unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FPX_SIZE];
+ struct faultinfo faultinfo;
+ long syscall;
+ int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_EAX(r) REGS_EAX((r)->gp)
+#define UPT_EBX(r) REGS_EBX((r)->gp)
+#define UPT_ECX(r) REGS_ECX((r)->gp)
+#define UPT_EDX(r) REGS_EDX((r)->gp)
+#define UPT_ESI(r) REGS_ESI((r)->gp)
+#define UPT_EDI(r) REGS_EDI((r)->gp)
+#define UPT_EBP(r) REGS_EBP((r)->gp)
+#define UPT_ORIG_EAX(r) ((r)->syscall)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+
+#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
+#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
+#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
+#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
+#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+struct syscall_args {
+ unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+ { .args = { UPT_SYSCALL_ARG1(r), \
+ UPT_SYSCALL_ARG2(r), \
+ UPT_SYSCALL_ARG3(r), \
+ UPT_SYSCALL_ARG4(r), \
+ UPT_SYSCALL_ARG5(r), \
+ UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
+#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
+#define UPT_SYSCALL_RET(r) UPT_EAX(r)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+extern void arch_init_registers(int pid);
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace_64.h b/arch/x86/um/shared/sysdep/ptrace_64.h
new file mode 100644
index 0000000..031edc5
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace_64.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_X86_64_PTRACE_H
+#define __SYSDEP_X86_64_PTRACE_H
+
+#include <generated/user_constants.h>
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+
+#define REGS_RBX(r) ((r)[HOST_BX])
+#define REGS_RCX(r) ((r)[HOST_CX])
+#define REGS_RDX(r) ((r)[HOST_DX])
+#define REGS_RSI(r) ((r)[HOST_SI])
+#define REGS_RDI(r) ((r)[HOST_DI])
+#define REGS_RBP(r) ((r)[HOST_BP])
+#define REGS_RAX(r) ((r)[HOST_AX])
+#define REGS_R8(r) ((r)[HOST_R8])
+#define REGS_R9(r) ((r)[HOST_R9])
+#define REGS_R10(r) ((r)[HOST_R10])
+#define REGS_R11(r) ((r)[HOST_R11])
+#define REGS_R12(r) ((r)[HOST_R12])
+#define REGS_R13(r) ((r)[HOST_R13])
+#define REGS_R14(r) ((r)[HOST_R14])
+#define REGS_R15(r) ((r)[HOST_R15])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_SS(r) ((r)[HOST_SS])
+
+#define HOST_FS_BASE 21
+#define HOST_GS_BASE 22
+#define HOST_DS 23
+#define HOST_ES 24
+#define HOST_FS 25
+#define HOST_GS 26
+
+/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these
+ * are already defined for kernel code, but not for userspace code.
+ */
+#ifndef FS_BASE
+/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
+ * which is what x86_64 ptrace actually uses.
+ */
+#define FS_BASE (HOST_FS_BASE * sizeof(long))
+#define GS_BASE (HOST_GS_BASE * sizeof(long))
+#define DS (HOST_DS * sizeof(long))
+#define ES (HOST_ES * sizeof(long))
+#define FS (HOST_FS * sizeof(long))
+#define GS (HOST_GS * sizeof(long))
+#endif
+
+#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
+#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_AX])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
+
+#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
+
+#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
+
+#define REGS_TRAP(r) ((r)->trap_type)
+
+#define REGS_ERR(r) ((r)->fault_type)
+
+struct uml_pt_regs {
+ unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FP_SIZE];
+ struct faultinfo faultinfo;
+ long syscall;
+ int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_RBX(r) REGS_RBX((r)->gp)
+#define UPT_RCX(r) REGS_RCX((r)->gp)
+#define UPT_RDX(r) REGS_RDX((r)->gp)
+#define UPT_RSI(r) REGS_RSI((r)->gp)
+#define UPT_RDI(r) REGS_RDI((r)->gp)
+#define UPT_RBP(r) REGS_RBP((r)->gp)
+#define UPT_RAX(r) REGS_RAX((r)->gp)
+#define UPT_R8(r) REGS_R8((r)->gp)
+#define UPT_R9(r) REGS_R9((r)->gp)
+#define UPT_R10(r) REGS_R10((r)->gp)
+#define UPT_R11(r) REGS_R11((r)->gp)
+#define UPT_R12(r) REGS_R12((r)->gp)
+#define UPT_R13(r) REGS_R13((r)->gp)
+#define UPT_R14(r) REGS_R14((r)->gp)
+#define UPT_R15(r) REGS_R15((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_SYSCALL_NR(r) ((r)->syscall)
+#define UPT_SYSCALL_RET(r) UPT_RAX(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
+#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
+#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
+#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
+#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
+
+struct syscall_args {
+ unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+ { .args = { UPT_SYSCALL_ARG1(r), \
+ UPT_SYSCALL_ARG2(r), \
+ UPT_SYSCALL_ARG3(r), \
+ UPT_SYSCALL_ARG4(r), \
+ UPT_SYSCALL_ARG5(r), \
+ UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+static inline void arch_init_registers(int pid)
+{
+}
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace_user.h b/arch/x86/um/shared/sysdep/ptrace_user.h
new file mode 100644
index 0000000..16cd6b5
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace_user.h
@@ -0,0 +1,27 @@
+#include <generated/user_constants.h>
+
+#define PT_OFFSET(r) ((r) * sizeof(long))
+
+#define PT_SYSCALL_NR(regs) ((regs)[HOST_ORIG_AX])
+#define PT_SYSCALL_NR_OFFSET PT_OFFSET(HOST_ORIG_AX)
+
+#define PT_SYSCALL_RET_OFFSET PT_OFFSET(HOST_AX)
+
+#define REGS_IP_INDEX HOST_IP
+#define REGS_SP_INDEX HOST_SP
+
+#ifdef __i386__
+#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
+#else
+#define FP_SIZE HOST_FP_SIZE
+
+/*
+ * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
+ * it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
+ * 2.4 name and value for 2.4 host compatibility.
+ */
+#ifndef PTRACE_OLDSETOPTIONS
+#define PTRACE_OLDSETOPTIONS 21
+#endif
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/skas_ptrace.h b/arch/x86/um/shared/sysdep/skas_ptrace.h
new file mode 100644
index 0000000..453febe
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/skas_ptrace.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_X86_SKAS_PTRACE_H
+#define __SYSDEP_X86_SKAS_PTRACE_H
+
+struct ptrace_faultinfo {
+ int is_write;
+ unsigned long addr;
+};
+
+struct ptrace_ldt {
+ int func;
+ void *ptr;
+ unsigned long bytecount;
+};
+
+#define PTRACE_LDT 54
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/stub.h b/arch/x86/um/shared/sysdep/stub.h
new file mode 100644
index 0000000..bd161e3
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/stub.h
@@ -0,0 +1,14 @@
+#include <asm/unistd.h>
+#include <sys/mman.h>
+#include <signal.h>
+#include "as-layout.h"
+#include "stub-data.h"
+
+#ifdef __i386__
+#include "stub_32.h"
+#else
+#include "stub_64.h"
+#endif
+
+extern void stub_segv_handler(int, siginfo_t *, void *);
+extern void stub_clone_handler(void);
diff --git a/arch/x86/um/shared/sysdep/stub_32.h b/arch/x86/um/shared/sysdep/stub_32.h
new file mode 100644
index 0000000..51fd256
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/stub_32.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <asm/ptrace.h>
+
+#define STUB_SYSCALL_RET EAX
+#define STUB_MMAP_NR __NR_mmap2
+#define MMAP_OFFSET(o) ((o) >> UM_KERN_PAGE_SHIFT)
+
+static inline long stub_syscall0(long syscall)
+{
+ long ret;
+
+ __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
+
+ return ret;
+}
+
+static inline long stub_syscall1(long syscall, long arg1)
+{
+ long ret;
+
+ __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
+
+ return ret;
+}
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+ long ret;
+
+ __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+ "c" (arg2));
+
+ return ret;
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+ long ret;
+
+ __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+ "c" (arg2), "d" (arg3));
+
+ return ret;
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+ long arg4)
+{
+ long ret;
+
+ __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+ "c" (arg2), "d" (arg3), "S" (arg4));
+
+ return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+ long arg4, long arg5)
+{
+ long ret;
+
+ __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+ "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
+
+ return ret;
+}
+
+static inline void trap_myself(void)
+{
+ __asm("int3");
+}
+
+static inline void remap_stack(int fd, unsigned long offset)
+{
+ __asm__ volatile ("movl %%eax,%%ebp ; movl %0,%%eax ; int $0x80 ;"
+ "movl %7, %%ebx ; movl %%eax, (%%ebx)"
+ : : "g" (STUB_MMAP_NR), "b" (STUB_DATA),
+ "c" (UM_KERN_PAGE_SIZE),
+ "d" (PROT_READ | PROT_WRITE),
+ "S" (MAP_FIXED | MAP_SHARED), "D" (fd),
+ "a" (offset),
+ "i" (&((struct stub_data *) STUB_DATA)->err)
+ : "memory");
+}
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/stub_64.h b/arch/x86/um/shared/sysdep/stub_64.h
new file mode 100644
index 0000000..994df93
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/stub_64.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <sysdep/ptrace_user.h>
+
+#define STUB_SYSCALL_RET PT_INDEX(RAX)
+#define STUB_MMAP_NR __NR_mmap
+#define MMAP_OFFSET(o) (o)
+
+#define __syscall_clobber "r11","rcx","memory"
+#define __syscall "syscall"
+
+static inline long stub_syscall0(long syscall)
+{
+ long ret;
+
+ __asm__ volatile (__syscall
+ : "=a" (ret)
+ : "0" (syscall) : __syscall_clobber );
+
+ return ret;
+}
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+ long ret;
+
+ __asm__ volatile (__syscall
+ : "=a" (ret)
+ : "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber );
+
+ return ret;
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+ long ret;
+
+ __asm__ volatile (__syscall
+ : "=a" (ret)
+ : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3)
+ : __syscall_clobber );
+
+ return ret;
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+ long arg4)
+{
+ long ret;
+
+ __asm__ volatile ("movq %5,%%r10 ; " __syscall
+ : "=a" (ret)
+ : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+ "g" (arg4)
+ : __syscall_clobber, "r10" );
+
+ return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+ long arg4, long arg5)
+{
+ long ret;
+
+ __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall
+ : "=a" (ret)
+ : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+ "g" (arg4), "g" (arg5)
+ : __syscall_clobber, "r10", "r8" );
+
+ return ret;
+}
+
+static inline void trap_myself(void)
+{
+ __asm("int3");
+}
+
+static inline void remap_stack(long fd, unsigned long offset)
+{
+ __asm__ volatile ("movq %4,%%r10 ; movq %5,%%r8 ; "
+ "movq %6, %%r9; " __syscall "; movq %7, %%rbx ; "
+ "movq %%rax, (%%rbx)":
+ : "a" (STUB_MMAP_NR), "D" (STUB_DATA),
+ "S" (UM_KERN_PAGE_SIZE),
+ "d" (PROT_READ | PROT_WRITE),
+ "g" (MAP_FIXED | MAP_SHARED), "g" (fd),
+ "g" (offset),
+ "i" (&((struct stub_data *) STUB_DATA)->err)
+ : __syscall_clobber, "r10", "r8", "r9" );
+}
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls.h
new file mode 100644
index 0000000..bd9a89b
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/syscalls.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "syscalls_32.h"
+#else
+#include "syscalls_64.h"
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls_32.h
similarity index 100%
rename from arch/um/sys-i386/shared/sysdep/syscalls.h
rename to arch/x86/um/shared/sysdep/syscalls_32.h
diff --git a/arch/x86/um/shared/sysdep/syscalls_64.h b/arch/x86/um/shared/sysdep/syscalls_64.h
new file mode 100644
index 0000000..8a7d5e1
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/syscalls_64.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_X86_64_SYSCALLS_H__
+#define __SYSDEP_X86_64_SYSCALLS_H__
+
+#include <linux/msg.h>
+#include <linux/shm.h>
+
+typedef long syscall_handler_t(void);
+
+extern syscall_handler_t *sys_call_table[];
+
+#define EXECUTE_SYSCALL(syscall, regs) \
+ (((long (*)(long, long, long, long, long, long)) \
+ (*sys_call_table[syscall]))(UPT_SYSCALL_ARG1(®s->regs), \
+ UPT_SYSCALL_ARG2(®s->regs), \
+ UPT_SYSCALL_ARG3(®s->regs), \
+ UPT_SYSCALL_ARG4(®s->regs), \
+ UPT_SYSCALL_ARG5(®s->regs), \
+ UPT_SYSCALL_ARG6(®s->regs)))
+
+extern long old_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff);
+extern syscall_handler_t sys_modify_ldt;
+extern syscall_handler_t sys_arch_prctl;
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/tls.h b/arch/x86/um/shared/sysdep/tls.h
new file mode 100644
index 0000000..27cce00
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/tls.h
@@ -0,0 +1,39 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+ unsigned int entry_number;
+ unsigned int base_addr;
+ unsigned int limit;
+ unsigned int seg_32bit:1;
+ unsigned int contents:2;
+ unsigned int read_exec_only:1;
+ unsigned int limit_in_pages:1;
+ unsigned int seg_not_present:1;
+ unsigned int useable:1;
+#ifdef __x86_64__
+ unsigned int lm:1;
+#endif
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+
+extern int os_set_thread_area(user_desc_t *info, int pid);
+extern int os_get_thread_area(user_desc_t *info, int pid);
+
+#ifdef __i386__
+#define GDT_ENTRY_TLS_MIN_I386 6
+#define GDT_ENTRY_TLS_MIN_X86_64 12
+#endif
+
+#endif /* _SYSDEP_TLS_H */
diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c
new file mode 100644
index 0000000..4883b95
--- /dev/null
+++ b/arch/x86/um/signal.c
@@ -0,0 +1,624 @@
+/*
+ * Copyright (C) 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+
+#include <linux/personality.h>
+#include <linux/ptrace.h>
+#include <linux/kernel.h>
+#include <asm/unistd.h>
+#include <asm/uaccess.h>
+#include <asm/ucontext.h>
+#include "frame_kern.h"
+#include "skas.h"
+
+#ifdef CONFIG_X86_32
+
+/*
+ * FPU tag word conversions.
+ */
+
+static inline unsigned short twd_i387_to_fxsr(unsigned short twd)
+{
+ unsigned int tmp; /* to avoid 16 bit prefixes in the code */
+
+ /* Transform each pair of bits into 01 (valid) or 00 (empty) */
+ tmp = ~twd;
+ tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
+ /* and move the valid bits to the lower byte. */
+ tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
+ tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
+ tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
+ return tmp;
+}
+
+static inline unsigned long twd_fxsr_to_i387(struct user_fxsr_struct *fxsave)
+{
+ struct _fpxreg *st = NULL;
+ unsigned long twd = (unsigned long) fxsave->twd;
+ unsigned long tag;
+ unsigned long ret = 0xffff0000;
+ int i;
+
+#define FPREG_ADDR(f, n) ((char *)&(f)->st_space + (n) * 16)
+
+ for (i = 0; i < 8; i++) {
+ if (twd & 0x1) {
+ st = (struct _fpxreg *) FPREG_ADDR(fxsave, i);
+
+ switch (st->exponent & 0x7fff) {
+ case 0x7fff:
+ tag = 2; /* Special */
+ break;
+ case 0x0000:
+ if ( !st->significand[0] &&
+ !st->significand[1] &&
+ !st->significand[2] &&
+ !st->significand[3] ) {
+ tag = 1; /* Zero */
+ } else {
+ tag = 2; /* Special */
+ }
+ break;
+ default:
+ if (st->significand[3] & 0x8000) {
+ tag = 0; /* Valid */
+ } else {
+ tag = 2; /* Special */
+ }
+ break;
+ }
+ } else {
+ tag = 3; /* Empty */
+ }
+ ret |= (tag << (2 * i));
+ twd = twd >> 1;
+ }
+ return ret;
+}
+
+static int convert_fxsr_to_user(struct _fpstate __user *buf,
+ struct user_fxsr_struct *fxsave)
+{
+ unsigned long env[7];
+ struct _fpreg __user *to;
+ struct _fpxreg *from;
+ int i;
+
+ env[0] = (unsigned long)fxsave->cwd | 0xffff0000ul;
+ env[1] = (unsigned long)fxsave->swd | 0xffff0000ul;
+ env[2] = twd_fxsr_to_i387(fxsave);
+ env[3] = fxsave->fip;
+ env[4] = fxsave->fcs | ((unsigned long)fxsave->fop << 16);
+ env[5] = fxsave->foo;
+ env[6] = fxsave->fos;
+
+ if (__copy_to_user(buf, env, 7 * sizeof(unsigned long)))
+ return 1;
+
+ to = &buf->_st[0];
+ from = (struct _fpxreg *) &fxsave->st_space[0];
+ for (i = 0; i < 8; i++, to++, from++) {
+ unsigned long __user *t = (unsigned long __user *)to;
+ unsigned long *f = (unsigned long *)from;
+
+ if (__put_user(*f, t) ||
+ __put_user(*(f + 1), t + 1) ||
+ __put_user(from->exponent, &to->exponent))
+ return 1;
+ }
+ return 0;
+}
+
+static int convert_fxsr_from_user(struct user_fxsr_struct *fxsave,
+ struct _fpstate __user *buf)
+{
+ unsigned long env[7];
+ struct _fpxreg *to;
+ struct _fpreg __user *from;
+ int i;
+
+ if (copy_from_user( env, buf, 7 * sizeof(long)))
+ return 1;
+
+ fxsave->cwd = (unsigned short)(env[0] & 0xffff);
+ fxsave->swd = (unsigned short)(env[1] & 0xffff);
+ fxsave->twd = twd_i387_to_fxsr((unsigned short)(env[2] & 0xffff));
+ fxsave->fip = env[3];
+ fxsave->fop = (unsigned short)((env[4] & 0xffff0000ul) >> 16);
+ fxsave->fcs = (env[4] & 0xffff);
+ fxsave->foo = env[5];
+ fxsave->fos = env[6];
+
+ to = (struct _fpxreg *) &fxsave->st_space[0];
+ from = &buf->_st[0];
+ for (i = 0; i < 8; i++, to++, from++) {
+ unsigned long *t = (unsigned long *)to;
+ unsigned long __user *f = (unsigned long __user *)from;
+
+ if (__get_user(*t, f) ||
+ __get_user(*(t + 1), f + 1) ||
+ __get_user(to->exponent, &from->exponent))
+ return 1;
+ }
+ return 0;
+}
+
+extern int have_fpx_regs;
+
+#endif
+
+static int copy_sc_from_user(struct pt_regs *regs,
+ struct sigcontext __user *from)
+{
+ struct sigcontext sc;
+ int err, pid;
+
+ err = copy_from_user(&sc, from, sizeof(sc));
+ if (err)
+ return err;
+
+#define GETREG(regno, regname) regs->regs.gp[HOST_##regno] = sc.regname
+
+#ifdef CONFIG_X86_32
+ GETREG(GS, gs);
+ GETREG(FS, fs);
+ GETREG(ES, es);
+ GETREG(DS, ds);
+#endif
+ GETREG(DI, di);
+ GETREG(SI, si);
+ GETREG(BP, bp);
+ GETREG(SP, sp);
+ GETREG(BX, bx);
+ GETREG(DX, dx);
+ GETREG(CX, cx);
+ GETREG(AX, ax);
+ GETREG(IP, ip);
+
+#ifdef CONFIG_X86_64
+ GETREG(R8, r8);
+ GETREG(R9, r9);
+ GETREG(R10, r10);
+ GETREG(R11, r11);
+ GETREG(R12, r12);
+ GETREG(R13, r13);
+ GETREG(R14, r14);
+ GETREG(R15, r15);
+#endif
+
+ GETREG(CS, cs);
+ GETREG(EFLAGS, flags);
+#ifdef CONFIG_X86_32
+ GETREG(SS, ss);
+#endif
+
+#undef GETREG
+
+ pid = userspace_pid[current_thread_info()->cpu];
+#ifdef CONFIG_X86_32
+ if (have_fpx_regs) {
+ struct user_fxsr_struct fpx;
+
+ err = copy_from_user(&fpx,
+ &((struct _fpstate __user *)sc.fpstate)->_fxsr_env[0],
+ sizeof(struct user_fxsr_struct));
+ if (err)
+ return 1;
+
+ err = convert_fxsr_from_user(&fpx, sc.fpstate);
+ if (err)
+ return 1;
+
+ err = restore_fpx_registers(pid, (unsigned long *) &fpx);
+ if (err < 0) {
+ printk(KERN_ERR "copy_sc_from_user - "
+ "restore_fpx_registers failed, errno = %d\n",
+ -err);
+ return 1;
+ }
+ } else
+#endif
+ {
+ struct user_i387_struct fp;
+
+ err = copy_from_user(&fp, sc.fpstate,
+ sizeof(struct user_i387_struct));
+ if (err)
+ return 1;
+
+ err = restore_fp_registers(pid, (unsigned long *) &fp);
+ if (err < 0) {
+ printk(KERN_ERR "copy_sc_from_user - "
+ "restore_fp_registers failed, errno = %d\n",
+ -err);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int copy_sc_to_user(struct sigcontext __user *to,
+ struct _fpstate __user *to_fp, struct pt_regs *regs,
+ unsigned long mask)
+{
+ struct sigcontext sc;
+ struct faultinfo * fi = ¤t->thread.arch.faultinfo;
+ int err, pid;
+ memset(&sc, 0, sizeof(struct sigcontext));
+
+#define PUTREG(regno, regname) sc.regname = regs->regs.gp[HOST_##regno]
+
+#ifdef CONFIG_X86_32
+ PUTREG(GS, gs);
+ PUTREG(FS, fs);
+ PUTREG(ES, es);
+ PUTREG(DS, ds);
+#endif
+ PUTREG(DI, di);
+ PUTREG(SI, si);
+ PUTREG(BP, bp);
+ PUTREG(SP, sp);
+ PUTREG(BX, bx);
+ PUTREG(DX, dx);
+ PUTREG(CX, cx);
+ PUTREG(AX, ax);
+#ifdef CONFIG_X86_64
+ PUTREG(R8, r8);
+ PUTREG(R9, r9);
+ PUTREG(R10, r10);
+ PUTREG(R11, r11);
+ PUTREG(R12, r12);
+ PUTREG(R13, r13);
+ PUTREG(R14, r14);
+ PUTREG(R15, r15);
+#endif
+
+ sc.cr2 = fi->cr2;
+ sc.err = fi->error_code;
+ sc.trapno = fi->trap_no;
+ PUTREG(IP, ip);
+ PUTREG(CS, cs);
+ PUTREG(EFLAGS, flags);
+#ifdef CONFIG_X86_32
+ PUTREG(SP, sp_at_signal);
+ PUTREG(SS, ss);
+#endif
+#undef PUTREG
+ sc.oldmask = mask;
+ sc.fpstate = to_fp;
+
+ err = copy_to_user(to, &sc, sizeof(struct sigcontext));
+ if (err)
+ return 1;
+
+ pid = userspace_pid[current_thread_info()->cpu];
+
+#ifdef CONFIG_X86_32
+ if (have_fpx_regs) {
+ struct user_fxsr_struct fpx;
+
+ err = save_fpx_registers(pid, (unsigned long *) &fpx);
+ if (err < 0){
+ printk(KERN_ERR "copy_sc_to_user - save_fpx_registers "
+ "failed, errno = %d\n", err);
+ return 1;
+ }
+
+ err = convert_fxsr_to_user(to_fp, &fpx);
+ if (err)
+ return 1;
+
+ err |= __put_user(fpx.swd, &to_fp->status);
+ err |= __put_user(X86_FXSR_MAGIC, &to_fp->magic);
+ if (err)
+ return 1;
+
+ if (copy_to_user(&to_fp->_fxsr_env[0], &fpx,
+ sizeof(struct user_fxsr_struct)))
+ return 1;
+ } else
+#endif
+ {
+ struct user_i387_struct fp;
+
+ err = save_fp_registers(pid, (unsigned long *) &fp);
+ if (copy_to_user(to_fp, &fp, sizeof(struct user_i387_struct)))
+ return 1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_X86_32
+static int copy_ucontext_to_user(struct ucontext __user *uc,
+ struct _fpstate __user *fp, sigset_t *set,
+ unsigned long sp)
+{
+ int err = 0;
+
+ err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp);
+ err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags);
+ err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
+ err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs, 0);
+ err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
+ return err;
+}
+
+struct sigframe
+{
+ char __user *pretcode;
+ int sig;
+ struct sigcontext sc;
+ struct _fpstate fpstate;
+ unsigned long extramask[_NSIG_WORDS-1];
+ char retcode[8];
+};
+
+struct rt_sigframe
+{
+ char __user *pretcode;
+ int sig;
+ struct siginfo __user *pinfo;
+ void __user *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ struct _fpstate fpstate;
+ char retcode[8];
+};
+
+int setup_signal_stack_sc(unsigned long stack_top, int sig,
+ struct k_sigaction *ka, struct pt_regs *regs,
+ sigset_t *mask)
+{
+ struct sigframe __user *frame;
+ void __user *restorer;
+ int err = 0;
+
+ /* This is the same calculation as i386 - ((sp + 4) & 15) == 0 */
+ stack_top = ((stack_top + 4) & -16UL) - 4;
+ frame = (struct sigframe __user *) stack_top - 1;
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ return 1;
+
+ restorer = frame->retcode;
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = ka->sa.sa_restorer;
+
+ err |= __put_user(restorer, &frame->pretcode);
+ err |= __put_user(sig, &frame->sig);
+ err |= copy_sc_to_user(&frame->sc, &frame->fpstate, regs, mask->sig[0]);
+ if (_NSIG_WORDS > 1)
+ err |= __copy_to_user(&frame->extramask, &mask->sig[1],
+ sizeof(frame->extramask));
+
+ /*
+ * This is popl %eax ; movl $,%eax ; int $0x80
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
+ err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
+
+ if (err)
+ return err;
+
+ PT_REGS_SP(regs) = (unsigned long) frame;
+ PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
+ PT_REGS_EAX(regs) = (unsigned long) sig;
+ PT_REGS_EDX(regs) = (unsigned long) 0;
+ PT_REGS_ECX(regs) = (unsigned long) 0;
+
+ if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
+ ptrace_notify(SIGTRAP);
+ return 0;
+}
+
+int setup_signal_stack_si(unsigned long stack_top, int sig,
+ struct k_sigaction *ka, struct pt_regs *regs,
+ siginfo_t *info, sigset_t *mask)
+{
+ struct rt_sigframe __user *frame;
+ void __user *restorer;
+ int err = 0;
+
+ stack_top &= -8UL;
+ frame = (struct rt_sigframe __user *) stack_top - 1;
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ return 1;
+
+ restorer = frame->retcode;
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = ka->sa.sa_restorer;
+
+ err |= __put_user(restorer, &frame->pretcode);
+ err |= __put_user(sig, &frame->sig);
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+ err |= copy_ucontext_to_user(&frame->uc, &frame->fpstate, mask,
+ PT_REGS_SP(regs));
+
+ /*
+ * This is movl $,%eax ; int $0x80
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
+ err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
+ err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
+
+ if (err)
+ return err;
+
+ PT_REGS_SP(regs) = (unsigned long) frame;
+ PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
+ PT_REGS_EAX(regs) = (unsigned long) sig;
+ PT_REGS_EDX(regs) = (unsigned long) &frame->info;
+ PT_REGS_ECX(regs) = (unsigned long) &frame->uc;
+
+ if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
+ ptrace_notify(SIGTRAP);
+ return 0;
+}
+
+long sys_sigreturn(struct pt_regs *regs)
+{
+ unsigned long sp = PT_REGS_SP(¤t->thread.regs);
+ struct sigframe __user *frame = (struct sigframe __user *)(sp - 8);
+ sigset_t set;
+ struct sigcontext __user *sc = &frame->sc;
+ unsigned long __user *oldmask = &sc->oldmask;
+ unsigned long __user *extramask = frame->extramask;
+ int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long);
+
+ if (copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) ||
+ copy_from_user(&set.sig[1], extramask, sig_size))
+ goto segfault;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ set_current_blocked(&set);
+
+ if (copy_sc_from_user(¤t->thread.regs, sc))
+ goto segfault;
+
+ /* Avoid ERESTART handling */
+ PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
+ return PT_REGS_SYSCALL_RET(¤t->thread.regs);
+
+ segfault:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+#else
+
+struct rt_sigframe
+{
+ char __user *pretcode;
+ struct ucontext uc;
+ struct siginfo info;
+ struct _fpstate fpstate;
+};
+
+int setup_signal_stack_si(unsigned long stack_top, int sig,
+ struct k_sigaction *ka, struct pt_regs * regs,
+ siginfo_t *info, sigset_t *set)
+{
+ struct rt_sigframe __user *frame;
+ int err = 0;
+ struct task_struct *me = current;
+
+ frame = (struct rt_sigframe __user *)
+ round_down(stack_top - sizeof(struct rt_sigframe), 16);
+ /* Subtract 128 for a red zone and 8 for proper alignment */
+ frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8);
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto out;
+
+ if (ka->sa.sa_flags & SA_SIGINFO) {
+ err |= copy_siginfo_to_user(&frame->info, info);
+ if (err)
+ goto out;
+ }
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(PT_REGS_SP(regs)),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= copy_sc_to_user(&frame->uc.uc_mcontext, &frame->fpstate, regs,
+ set->sig[0]);
+ err |= __put_user(&frame->fpstate, &frame->uc.uc_mcontext.fpstate);
+ if (sizeof(*set) == 16) {
+ __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
+ __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
+ }
+ else
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set,
+ sizeof(*set));
+
+ /*
+ * Set up to return from userspace. If provided, use a stub
+ * already in userspace.
+ */
+ /* x86-64 should always use SA_RESTORER. */
+ if (ka->sa.sa_flags & SA_RESTORER)
+ err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
+ else
+ /* could use a vstub here */
+ return err;
+
+ if (err)
+ return err;
+
+ /* Set up registers for signal handler */
+ {
+ struct exec_domain *ed = current_thread_info()->exec_domain;
+ if (unlikely(ed && ed->signal_invmap && sig < 32))
+ sig = ed->signal_invmap[sig];
+ }
+
+ PT_REGS_SP(regs) = (unsigned long) frame;
+ PT_REGS_RDI(regs) = sig;
+ /* In case the signal handler was declared without prototypes */
+ PT_REGS_RAX(regs) = 0;
+
+ /*
+ * This also works for non SA_SIGINFO handlers because they expect the
+ * next argument after the signal number on the stack.
+ */
+ PT_REGS_RSI(regs) = (unsigned long) &frame->info;
+ PT_REGS_RDX(regs) = (unsigned long) &frame->uc;
+ PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler;
+ out:
+ return err;
+}
+#endif
+
+long sys_rt_sigreturn(struct pt_regs *regs)
+{
+ unsigned long sp = PT_REGS_SP(¤t->thread.regs);
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *)(sp - sizeof(long));
+ struct ucontext __user *uc = &frame->uc;
+ sigset_t set;
+
+ if (copy_from_user(&set, &uc->uc_sigmask, sizeof(set)))
+ goto segfault;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ set_current_blocked(&set);
+
+ if (copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext))
+ goto segfault;
+
+ /* Avoid ERESTART handling */
+ PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
+ return PT_REGS_SYSCALL_RET(¤t->thread.regs);
+
+ segfault:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+#ifdef CONFIG_X86_32
+long ptregs_sigreturn(void)
+{
+ return sys_sigreturn(NULL);
+}
+long ptregs_rt_sigreturn(void)
+{
+ return sys_rt_sigreturn(NULL);
+}
+#endif
diff --git a/arch/um/sys-i386/stub.S b/arch/x86/um/stub_32.S
similarity index 100%
rename from arch/um/sys-i386/stub.S
rename to arch/x86/um/stub_32.S
diff --git a/arch/um/sys-x86_64/stub.S b/arch/x86/um/stub_64.S
similarity index 100%
rename from arch/um/sys-x86_64/stub.S
rename to arch/x86/um/stub_64.S
diff --git a/arch/x86/um/stub_segv.c b/arch/x86/um/stub_segv.c
new file mode 100644
index 0000000..b7450bd
--- /dev/null
+++ b/arch/x86/um/stub_segv.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#include "sysdep/stub.h"
+#include "sysdep/faultinfo.h"
+#include "sysdep/mcontext.h"
+
+void __attribute__ ((__section__ (".__syscall_stub")))
+stub_segv_handler(int sig, siginfo_t *info, void *p)
+{
+ struct ucontext *uc = p;
+
+ GET_FAULTINFO_FROM_MC(*((struct faultinfo *) STUB_DATA),
+ &uc->uc_mcontext);
+ trap_myself();
+}
+
diff --git a/arch/x86/um/sys_call_table_32.S b/arch/x86/um/sys_call_table_32.S
new file mode 100644
index 0000000..a7ca80d
--- /dev/null
+++ b/arch/x86/um/sys_call_table_32.S
@@ -0,0 +1,26 @@
+#include <linux/linkage.h>
+/* Steal i386 syscall table for our purposes, but with some slight changes.*/
+
+#define sys_iopl sys_ni_syscall
+#define sys_ioperm sys_ni_syscall
+
+#define sys_vm86old sys_ni_syscall
+#define sys_vm86 sys_ni_syscall
+
+#define old_mmap sys_old_mmap
+
+#define ptregs_fork sys_fork
+#define ptregs_execve sys_execve
+#define ptregs_iopl sys_iopl
+#define ptregs_vm86old sys_vm86old
+#define ptregs_clone sys_clone
+#define ptregs_vm86 sys_vm86
+#define ptregs_sigaltstack sys_sigaltstack
+#define ptregs_vfork sys_vfork
+
+.section .rodata,"a"
+
+#include "../kernel/syscall_table_32.S"
+
+ENTRY(syscall_table_size)
+.long .-sys_call_table
diff --git a/arch/x86/um/sys_call_table_64.c b/arch/x86/um/sys_call_table_64.c
new file mode 100644
index 0000000..99522f7
--- /dev/null
+++ b/arch/x86/um/sys_call_table_64.c
@@ -0,0 +1,64 @@
+/*
+ * System call table for UML/x86-64, copied from arch/x86_64/kernel/syscall.c
+ * with some changes for UML.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <linux/cache.h>
+
+#define __NO_STUBS
+
+/*
+ * Below you can see, in terms of #define's, the differences between the x86-64
+ * and the UML syscall table.
+ */
+
+/* Not going to be implemented by UML, since we have no hardware. */
+#define stub_iopl sys_ni_syscall
+#define sys_ioperm sys_ni_syscall
+
+/*
+ * The UML TLS problem. Note that x86_64 does not implement this, so the below
+ * is needed only for the ia32 compatibility.
+ */
+
+/* On UML we call it this way ("old" means it's not mmap2) */
+#define sys_mmap old_mmap
+
+#define stub_clone sys_clone
+#define stub_fork sys_fork
+#define stub_vfork sys_vfork
+#define stub_execve sys_execve
+#define stub_rt_sigsuspend sys_rt_sigsuspend
+#define stub_sigaltstack sys_sigaltstack
+#define stub_rt_sigreturn sys_rt_sigreturn
+
+#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
+#undef _ASM_X86_UNISTD_64_H
+#include "../../x86/include/asm/unistd_64.h"
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym) [ nr ] = sym,
+#undef _ASM_X86_UNISTD_64_H
+
+typedef void (*sys_call_ptr_t)(void);
+
+extern void sys_ni_syscall(void);
+
+/*
+ * We used to have a trick here which made sure that holes in the
+ * x86_64 table were filled in with sys_ni_syscall, but a comment in
+ * unistd_64.h says that holes aren't allowed, so the trick was
+ * removed.
+ * The trick looked like this
+ * [0 ... UM_NR_syscall_max] = &sys_ni_syscall
+ * before including unistd_64.h - the later initializations overwrote
+ * the sys_ni_syscall filler.
+ */
+
+sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
+#include <asm/unistd_64.h>
+};
+
+int syscall_table_size = sizeof(sys_call_table);
diff --git a/arch/um/sys-i386/syscalls.c b/arch/x86/um/syscalls_32.c
similarity index 100%
rename from arch/um/sys-i386/syscalls.c
rename to arch/x86/um/syscalls_32.c
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/x86/um/syscalls_64.c
similarity index 100%
rename from arch/um/sys-x86_64/syscalls.c
rename to arch/x86/um/syscalls_64.c
diff --git a/arch/um/sys-i386/sysrq.c b/arch/x86/um/sysrq_32.c
similarity index 100%
rename from arch/um/sys-i386/sysrq.c
rename to arch/x86/um/sysrq_32.c
diff --git a/arch/x86/um/sysrq_64.c b/arch/x86/um/sysrq_64.c
new file mode 100644
index 0000000..e891343
--- /dev/null
+++ b/arch/x86/um/sysrq_64.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/utsname.h>
+#include <asm/current.h>
+#include <asm/ptrace.h>
+#include "sysrq.h"
+
+void __show_regs(struct pt_regs *regs)
+{
+ printk("\n");
+ print_modules();
+ printk(KERN_INFO "Pid: %d, comm: %.20s %s %s\n", task_pid_nr(current),
+ current->comm, print_tainted(), init_utsname()->release);
+ printk(KERN_INFO "RIP: %04lx:[<%016lx>]\n", PT_REGS_CS(regs) & 0xffff,
+ PT_REGS_RIP(regs));
+ printk(KERN_INFO "RSP: %016lx EFLAGS: %08lx\n", PT_REGS_SP(regs),
+ PT_REGS_EFLAGS(regs));
+ printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
+ PT_REGS_RAX(regs), PT_REGS_RBX(regs), PT_REGS_RCX(regs));
+ printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
+ PT_REGS_RDX(regs), PT_REGS_RSI(regs), PT_REGS_RDI(regs));
+ printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
+ PT_REGS_RBP(regs), PT_REGS_R8(regs), PT_REGS_R9(regs));
+ printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
+ PT_REGS_R10(regs), PT_REGS_R11(regs), PT_REGS_R12(regs));
+ printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
+ PT_REGS_R13(regs), PT_REGS_R14(regs), PT_REGS_R15(regs));
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ __show_regs(regs);
+ show_trace(current, (unsigned long *) ®s);
+}
diff --git a/arch/um/sys-i386/tls.c b/arch/x86/um/tls_32.c
similarity index 100%
rename from arch/um/sys-i386/tls.c
rename to arch/x86/um/tls_32.c
diff --git a/arch/um/sys-x86_64/tls.c b/arch/x86/um/tls_64.c
similarity index 100%
rename from arch/um/sys-x86_64/tls.c
rename to arch/x86/um/tls_64.c
diff --git a/arch/x86/um/user-offsets.c b/arch/x86/um/user-offsets.c
new file mode 100644
index 0000000..ca49be8
--- /dev/null
+++ b/arch/x86/um/user-offsets.c
@@ -0,0 +1,80 @@
+#include <stdio.h>
+#include <stddef.h>
+#include <signal.h>
+#include <sys/poll.h>
+#include <sys/mman.h>
+#include <sys/user.h>
+#define __FRAME_OFFSETS
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define DEFINE_LONGS(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
+
+void foo(void)
+{
+#ifdef __i386__
+ DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
+ DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
+
+ DEFINE(HOST_IP, EIP);
+ DEFINE(HOST_SP, UESP);
+ DEFINE(HOST_EFLAGS, EFL);
+ DEFINE(HOST_AX, EAX);
+ DEFINE(HOST_BX, EBX);
+ DEFINE(HOST_CX, ECX);
+ DEFINE(HOST_DX, EDX);
+ DEFINE(HOST_SI, ESI);
+ DEFINE(HOST_DI, EDI);
+ DEFINE(HOST_BP, EBP);
+ DEFINE(HOST_CS, CS);
+ DEFINE(HOST_SS, SS);
+ DEFINE(HOST_DS, DS);
+ DEFINE(HOST_FS, FS);
+ DEFINE(HOST_ES, ES);
+ DEFINE(HOST_GS, GS);
+ DEFINE(HOST_ORIG_AX, ORIG_EAX);
+#else
+ DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
+ DEFINE_LONGS(HOST_BX, RBX);
+ DEFINE_LONGS(HOST_CX, RCX);
+ DEFINE_LONGS(HOST_DI, RDI);
+ DEFINE_LONGS(HOST_SI, RSI);
+ DEFINE_LONGS(HOST_DX, RDX);
+ DEFINE_LONGS(HOST_BP, RBP);
+ DEFINE_LONGS(HOST_AX, RAX);
+ DEFINE_LONGS(HOST_R8, R8);
+ DEFINE_LONGS(HOST_R9, R9);
+ DEFINE_LONGS(HOST_R10, R10);
+ DEFINE_LONGS(HOST_R11, R11);
+ DEFINE_LONGS(HOST_R12, R12);
+ DEFINE_LONGS(HOST_R13, R13);
+ DEFINE_LONGS(HOST_R14, R14);
+ DEFINE_LONGS(HOST_R15, R15);
+ DEFINE_LONGS(HOST_ORIG_AX, ORIG_RAX);
+ DEFINE_LONGS(HOST_CS, CS);
+ DEFINE_LONGS(HOST_SS, SS);
+ DEFINE_LONGS(HOST_EFLAGS, EFLAGS);
+#if 0
+ DEFINE_LONGS(HOST_FS, FS);
+ DEFINE_LONGS(HOST_GS, GS);
+ DEFINE_LONGS(HOST_DS, DS);
+ DEFINE_LONGS(HOST_ES, ES);
+#endif
+
+ DEFINE_LONGS(HOST_IP, RIP);
+ DEFINE_LONGS(HOST_SP, RSP);
+#endif
+
+ DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
+ DEFINE(UM_POLLIN, POLLIN);
+ DEFINE(UM_POLLPRI, POLLPRI);
+ DEFINE(UM_POLLOUT, POLLOUT);
+
+ DEFINE(UM_PROT_READ, PROT_READ);
+ DEFINE(UM_PROT_WRITE, PROT_WRITE);
+ DEFINE(UM_PROT_EXEC, PROT_EXEC);
+}
diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile
new file mode 100644
index 0000000..6c803ca
--- /dev/null
+++ b/arch/x86/um/vdso/Makefile
@@ -0,0 +1,90 @@
+#
+# Building vDSO images for x86.
+#
+
+VDSO64-y := y
+
+vdso-install-$(VDSO64-y) += vdso.so
+
+
+# files to link into the vdso
+vobjs-y := vdso-note.o um_vdso.o
+
+# files to link into kernel
+obj-$(VDSO64-y) += vdso.o vma.o
+
+vobjs := $(foreach F,$(vobjs-y),$(obj)/$F)
+
+$(obj)/vdso.o: $(obj)/vdso.so
+
+targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y)
+
+export CPPFLAGS_vdso.lds += -P -C
+
+VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
+ -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
+
+$(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
+
+$(obj)/vdso.so.dbg: $(src)/vdso.lds $(vobjs) FORCE
+ $(call if_changed,vdso)
+
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+ $(call if_changed,objcopy)
+
+#
+# Don't omit frame pointers for ease of userspace debugging, but do
+# optimize sibling calls.
+#
+CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
+ $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) \
+ -fno-omit-frame-pointer -foptimize-sibling-calls
+
+$(vobjs): KBUILD_CFLAGS += $(CFL)
+
+#
+# vDSO code runs in userspace and -pg doesn't help with profiling anyway.
+#
+CFLAGS_REMOVE_vdso-note.o = -pg -fprofile-arcs -ftest-coverage
+CFLAGS_REMOVE_um_vdso.o = -pg -fprofile-arcs -ftest-coverage
+
+targets += vdso-syms.lds
+obj-$(VDSO64-y) += vdso-syms.lds
+
+#
+# Match symbols in the DSO that look like VDSO*; produce a file of constants.
+#
+sed-vdsosym := -e 's/^00*/0/' \
+ -e 's/^\([0-9a-fA-F]*\) . \(VDSO[a-zA-Z0-9_]*\)$$/\2 = 0x\1;/p'
+quiet_cmd_vdsosym = VDSOSYM $@
+define cmd_vdsosym
+ $(NM) $< | LC_ALL=C sed -n $(sed-vdsosym) | LC_ALL=C sort > $@
+endef
+
+$(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
+ $(call if_changed,vdsosym)
+
+#
+# The DSO images are built using a special linker script.
+#
+quiet_cmd_vdso = VDSO $@
+ cmd_vdso = $(CC) -nostdlib -o $@ \
+ $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \
+ -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
+ sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
+
+VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+GCOV_PROFILE := n
+
+#
+# Install the unstripped copy of vdso*.so listed in $(vdso-install-y).
+#
+quiet_cmd_vdso_install = INSTALL $@
+ cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
+$(vdso-install-y): %.so: $(obj)/%.so.dbg FORCE
+ @mkdir -p $(MODLIB)/vdso
+ $(call cmd,vdso_install)
+
+PHONY += vdso_install $(vdso-install-y)
+vdso_install: $(vdso-install-y)
diff --git a/arch/um/sys-x86_64/vdso/checkundef.sh b/arch/x86/um/vdso/checkundef.sh
similarity index 100%
rename from arch/um/sys-x86_64/vdso/checkundef.sh
rename to arch/x86/um/vdso/checkundef.sh
diff --git a/arch/um/sys-x86_64/vdso/um_vdso.c b/arch/x86/um/vdso/um_vdso.c
similarity index 100%
rename from arch/um/sys-x86_64/vdso/um_vdso.c
rename to arch/x86/um/vdso/um_vdso.c
diff --git a/arch/um/sys-x86_64/vdso/vdso-layout.lds.S b/arch/x86/um/vdso/vdso-layout.lds.S
similarity index 100%
rename from arch/um/sys-x86_64/vdso/vdso-layout.lds.S
rename to arch/x86/um/vdso/vdso-layout.lds.S
diff --git a/arch/um/sys-x86_64/vdso/vdso-note.S b/arch/x86/um/vdso/vdso-note.S
similarity index 100%
rename from arch/um/sys-x86_64/vdso/vdso-note.S
rename to arch/x86/um/vdso/vdso-note.S
diff --git a/arch/x86/um/vdso/vdso.S b/arch/x86/um/vdso/vdso.S
new file mode 100644
index 0000000..1cb468a
--- /dev/null
+++ b/arch/x86/um/vdso/vdso.S
@@ -0,0 +1,10 @@
+#include <linux/init.h>
+
+__INITDATA
+
+ .globl vdso_start, vdso_end
+vdso_start:
+ .incbin "arch/x86/um/vdso/vdso.so"
+vdso_end:
+
+__FINIT
diff --git a/arch/um/sys-x86_64/vdso/vdso.lds.S b/arch/x86/um/vdso/vdso.lds.S
similarity index 100%
rename from arch/um/sys-x86_64/vdso/vdso.lds.S
rename to arch/x86/um/vdso/vdso.lds.S
diff --git a/arch/x86/um/vdso/vma.c b/arch/x86/um/vdso/vma.c
new file mode 100644
index 0000000..91f4ec9a
--- /dev/null
+++ b/arch/x86/um/vdso/vma.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2011 Richard Weinberger <richrd@nod.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/page.h>
+#include <linux/init.h>
+
+unsigned int __read_mostly vdso_enabled = 1;
+unsigned long um_vdso_addr;
+
+extern unsigned long task_size;
+extern char vdso_start[], vdso_end[];
+
+static struct page **vdsop;
+
+static int __init init_vdso(void)
+{
+ struct page *um_vdso;
+
+ BUG_ON(vdso_end - vdso_start > PAGE_SIZE);
+
+ um_vdso_addr = task_size - PAGE_SIZE;
+
+ vdsop = kmalloc(sizeof(struct page *), GFP_KERNEL);
+ if (!vdsop)
+ goto oom;
+
+ um_vdso = alloc_page(GFP_KERNEL);
+ if (!um_vdso) {
+ kfree(vdsop);
+
+ goto oom;
+ }
+
+ copy_page(page_address(um_vdso), vdso_start);
+ *vdsop = um_vdso;
+
+ return 0;
+
+oom:
+ printk(KERN_ERR "Cannot allocate vdso\n");
+ vdso_enabled = 0;
+
+ return -ENOMEM;
+}
+subsys_initcall(init_vdso);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ int err;
+ struct mm_struct *mm = current->mm;
+
+ if (!vdso_enabled)
+ return 0;
+
+ down_write(&mm->mmap_sem);
+
+ err = install_special_mapping(mm, um_vdso_addr, PAGE_SIZE,
+ VM_READ|VM_EXEC|
+ VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+ VM_ALWAYSDUMP,
+ vdsop);
+
+ up_write(&mm->mmap_sem);
+
+ return err;
+}
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 316fbca..153407c 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -89,6 +89,15 @@
addr = start + (offset << PAGE_SHIFT);
if (addr >= end)
addr = end;
+
+ /*
+ * page-align it here so that get_unmapped_area doesn't
+ * align it wrongfully again to the next page. addr can come in 4K
+ * unaligned here as a result of stack start randomization.
+ */
+ addr = PAGE_ALIGN(addr);
+ addr = align_addr(addr, NULL, ALIGN_VDSO);
+
return addr;
}
diff --git a/block/genhd.c b/block/genhd.c
index e2f6790..94855a9 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -19,6 +19,7 @@
#include <linux/mutex.h>
#include <linux/idr.h>
#include <linux/log2.h>
+#include <linux/ctype.h>
#include "blk.h"
@@ -909,6 +910,74 @@
subsys_initcall(genhd_device_init);
+static ssize_t alias_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct gendisk *disk = dev_to_disk(dev);
+ ssize_t ret = 0;
+
+ if (disk->alias)
+ ret = snprintf(buf, ALIAS_LEN, "%s\n", disk->alias);
+ return ret;
+}
+
+static ssize_t alias_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct gendisk *disk = dev_to_disk(dev);
+ char *alias;
+ char *envp[] = { NULL, NULL };
+ unsigned char c;
+ int i;
+ ssize_t ret = count;
+
+ if (!count)
+ return -EINVAL;
+
+ if (count >= ALIAS_LEN) {
+ printk(KERN_ERR "alias: alias is too long\n");
+ return -EINVAL;
+ }
+
+ /* Validation check */
+ for (i = 0; i < count; i++) {
+ c = buf[i];
+ if (i == count - 1 && c == '\n')
+ break;
+ if (!isalnum(c) && c != '_' && c != '-') {
+ printk(KERN_ERR "alias: invalid alias\n");
+ return -EINVAL;
+ }
+ }
+
+ if (disk->alias) {
+ printk(KERN_INFO "alias: %s is already assigned (%s)\n",
+ disk->disk_name, disk->alias);
+ return -EINVAL;
+ }
+
+ alias = kasprintf(GFP_KERNEL, "%s", buf);
+ if (!alias)
+ return -ENOMEM;
+
+ if (alias[count - 1] == '\n')
+ alias[count - 1] = '\0';
+
+ envp[0] = kasprintf(GFP_KERNEL, "ALIAS=%s", alias);
+ if (!envp[0]) {
+ kfree(alias);
+ return -ENOMEM;
+ }
+
+ disk->alias = alias;
+ printk(KERN_INFO "alias: assigned %s to %s\n", alias, disk->disk_name);
+
+ kobject_uevent_env(&dev->kobj, KOBJ_ADD, envp);
+
+ kfree(envp[0]);
+ return ret;
+}
+
static ssize_t disk_range_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -968,6 +1037,7 @@
return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
}
+static DEVICE_ATTR(alias, S_IRUGO|S_IWUSR, alias_show, alias_store);
static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL);
static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
@@ -990,6 +1060,7 @@
#endif
static struct attribute *disk_attrs[] = {
+ &dev_attr_alias.attr,
&dev_attr_range.attr,
&dev_attr_ext_range.attr,
&dev_attr_removable.attr,
diff --git a/crypto/Kconfig b/crypto/Kconfig
index ae27b753..527a857 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -100,6 +100,14 @@
select CRYPTO_BLKCIPHER2
select CRYPTO_PCOMP2
+config CRYPTO_USER
+ tristate "Userspace cryptographic algorithm configuration"
+ depends on NET
+ select CRYPTO_MANAGER
+ help
+ Userapace configuration for cryptographic instantiations such as
+ cbc(aes).
+
config CRYPTO_MANAGER_DISABLE_TESTS
bool "Disable run-time self tests"
default y
@@ -407,6 +415,16 @@
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+config CRYPTO_SHA1_SSSE3
+ tristate "SHA1 digest algorithm (SSSE3/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA1
+ select CRYPTO_HASH
+ help
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
+ using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
+ Extensions (AVX), when available.
+
config CRYPTO_SHA256
tristate "SHA224 and SHA256 digest algorithm"
select CRYPTO_HASH
@@ -590,6 +608,7 @@
config CRYPTO_BLOWFISH
tristate "Blowfish cipher algorithm"
select CRYPTO_ALGAPI
+ select CRYPTO_BLOWFISH_COMMON
help
Blowfish cipher algorithm, by Bruce Schneier.
@@ -600,6 +619,30 @@
See also:
<http://www.schneier.com/blowfish.html>
+config CRYPTO_BLOWFISH_COMMON
+ tristate
+ help
+ Common parts of the Blowfish cipher algorithm shared by the
+ generic c and the assembler implementations.
+
+ See also:
+ <http://www.schneier.com/blowfish.html>
+
+config CRYPTO_BLOWFISH_X86_64
+ tristate "Blowfish cipher algorithm (x86_64)"
+ depends on (X86 || UML_X86) && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLOWFISH_COMMON
+ help
+ Blowfish cipher algorithm (x86_64), by Bruce Schneier.
+
+ This is a variable key length cipher which can use keys from 32
+ bits to 448 bits in length. It's fast, simple and specifically
+ designed for use on "large microprocessors".
+
+ See also:
+ <http://www.schneier.com/blowfish.html>
+
config CRYPTO_CAMELLIA
tristate "Camellia cipher algorithms"
depends on CRYPTO
@@ -793,6 +836,26 @@
See also:
<http://www.schneier.com/twofish.html>
+config CRYPTO_TWOFISH_X86_64_3WAY
+ tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
+ depends on (X86 || UML_X86) && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_TWOFISH_COMMON
+ select CRYPTO_TWOFISH_X86_64
+ help
+ Twofish cipher algorithm (x86_64, 3-way parallel).
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ This module provides Twofish cipher algorithm that processes three
+ blocks parallel, utilizing resources of out-of-order CPUs better.
+
+ See also:
+ <http://www.schneier.com/twofish.html>
+
comment "Compression"
config CRYPTO_DEFLATE
diff --git a/crypto/Makefile b/crypto/Makefile
index ce5a813..9e6eee2 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -31,6 +31,7 @@
cryptomgr-y := algboss.o testmgr.o
obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
+obj-$(CONFIG_CRYPTO_USER) += crypto_user.o
obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
obj-$(CONFIG_CRYPTO_VMAC) += vmac.o
obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
@@ -60,7 +61,8 @@
obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o
obj-$(CONFIG_CRYPTO_DES) += des_generic.o
obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o
-obj-$(CONFIG_CRYPTO_BLOWFISH) += blowfish.o
+obj-$(CONFIG_CRYPTO_BLOWFISH) += blowfish_generic.o
+obj-$(CONFIG_CRYPTO_BLOWFISH_COMMON) += blowfish_common.o
obj-$(CONFIG_CRYPTO_TWOFISH) += twofish_generic.o
obj-$(CONFIG_CRYPTO_TWOFISH_COMMON) += twofish_common.o
obj-$(CONFIG_CRYPTO_SERPENT) += serpent.o
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index fdc67d3..a816f24 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -23,6 +23,8 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
#include <crypto/scatterwalk.h>
@@ -381,6 +383,28 @@
return 0;
}
+static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_blkcipher rblkcipher;
+
+ snprintf(rblkcipher.type, CRYPTO_MAX_ALG_NAME, "%s", "ablkcipher");
+ snprintf(rblkcipher.geniv, CRYPTO_MAX_ALG_NAME, "%s",
+ alg->cra_ablkcipher.geniv ?: "<default>");
+
+ rblkcipher.blocksize = alg->cra_blocksize;
+ rblkcipher.min_keysize = alg->cra_ablkcipher.min_keysize;
+ rblkcipher.max_keysize = alg->cra_ablkcipher.max_keysize;
+ rblkcipher.ivsize = alg->cra_ablkcipher.ivsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_BLKCIPHER,
+ sizeof(struct crypto_report_blkcipher), &rblkcipher);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg)
@@ -403,6 +427,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_ablkcipher_show,
#endif
+ .report = crypto_ablkcipher_report,
};
EXPORT_SYMBOL_GPL(crypto_ablkcipher_type);
@@ -432,6 +457,28 @@
return 0;
}
+static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_blkcipher rblkcipher;
+
+ snprintf(rblkcipher.type, CRYPTO_MAX_ALG_NAME, "%s", "givcipher");
+ snprintf(rblkcipher.geniv, CRYPTO_MAX_ALG_NAME, "%s",
+ alg->cra_ablkcipher.geniv ?: "<built-in>");
+
+ rblkcipher.blocksize = alg->cra_blocksize;
+ rblkcipher.min_keysize = alg->cra_ablkcipher.min_keysize;
+ rblkcipher.max_keysize = alg->cra_ablkcipher.max_keysize;
+ rblkcipher.ivsize = alg->cra_ablkcipher.ivsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_BLKCIPHER,
+ sizeof(struct crypto_report_blkcipher), &rblkcipher);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg)
@@ -454,6 +501,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_givcipher_show,
#endif
+ .report = crypto_givcipher_report,
};
EXPORT_SYMBOL_GPL(crypto_givcipher_type);
diff --git a/crypto/aead.c b/crypto/aead.c
index 6729e8f..701556f 100644
--- a/crypto/aead.c
+++ b/crypto/aead.c
@@ -21,6 +21,8 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
#include "internal.h"
@@ -109,6 +111,28 @@
return 0;
}
+static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_aead raead;
+ struct aead_alg *aead = &alg->cra_aead;
+
+ snprintf(raead.type, CRYPTO_MAX_ALG_NAME, "%s", "aead");
+ snprintf(raead.geniv, CRYPTO_MAX_ALG_NAME, "%s",
+ aead->geniv ?: "<built-in>");
+
+ raead.blocksize = alg->cra_blocksize;
+ raead.maxauthsize = aead->maxauthsize;
+ raead.ivsize = aead->ivsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_AEAD,
+ sizeof(struct crypto_report_aead), &raead);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg)
@@ -130,6 +154,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_aead_show,
#endif
+ .report = crypto_aead_report,
};
EXPORT_SYMBOL_GPL(crypto_aead_type);
@@ -165,6 +190,28 @@
return 0;
}
+static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_aead raead;
+ struct aead_alg *aead = &alg->cra_aead;
+
+ snprintf(raead.type, CRYPTO_MAX_ALG_NAME, "%s", "nivaead");
+ snprintf(raead.geniv, CRYPTO_MAX_ALG_NAME, "%s", aead->geniv);
+
+ raead.blocksize = alg->cra_blocksize;
+ raead.maxauthsize = aead->maxauthsize;
+ raead.ivsize = aead->ivsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_AEAD,
+ sizeof(struct crypto_report_aead), &raead);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
+
static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg)
@@ -186,6 +233,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_nivaead_show,
#endif
+ .report = crypto_nivaead_report,
};
EXPORT_SYMBOL_GPL(crypto_nivaead_type);
diff --git a/crypto/ahash.c b/crypto/ahash.c
index f669822..a3e6ef9 100644
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -21,6 +21,8 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
#include "internal.h"
@@ -397,6 +399,24 @@
return sizeof(struct crypto_shash *);
}
+static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_hash rhash;
+
+ snprintf(rhash.type, CRYPTO_MAX_ALG_NAME, "%s", "ahash");
+
+ rhash.blocksize = alg->cra_blocksize;
+ rhash.digestsize = __crypto_hash_alg_common(alg)->digestsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_HASH,
+ sizeof(struct crypto_report_hash), &rhash);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
@@ -415,6 +435,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_ahash_show,
#endif
+ .report = crypto_ahash_report,
.maskclear = ~CRYPTO_ALG_TYPE_MASK,
.maskset = CRYPTO_ALG_TYPE_AHASH_MASK,
.type = CRYPTO_ALG_TYPE_AHASH,
diff --git a/crypto/algapi.c b/crypto/algapi.c
index c3cf1a6..54dd4e3 100644
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -22,8 +22,6 @@
#include "internal.h"
-static void crypto_remove_final(struct list_head *list);
-
static LIST_HEAD(crypto_template_list);
void crypto_larval_error(const char *name, u32 type, u32 mask)
@@ -129,9 +127,8 @@
BUG_ON(!list_empty(&inst->alg.cra_users));
}
-static void crypto_remove_spawns(struct crypto_alg *alg,
- struct list_head *list,
- struct crypto_alg *nalg)
+void crypto_remove_spawns(struct crypto_alg *alg, struct list_head *list,
+ struct crypto_alg *nalg)
{
u32 new_type = (nalg ?: alg)->cra_flags;
struct crypto_spawn *spawn, *n;
@@ -177,6 +174,7 @@
crypto_remove_spawn(spawn, list);
}
}
+EXPORT_SYMBOL_GPL(crypto_remove_spawns);
static struct crypto_larval *__crypto_register_alg(struct crypto_alg *alg)
{
@@ -321,7 +319,7 @@
}
EXPORT_SYMBOL_GPL(crypto_alg_tested);
-static void crypto_remove_final(struct list_head *list)
+void crypto_remove_final(struct list_head *list)
{
struct crypto_alg *alg;
struct crypto_alg *n;
@@ -331,6 +329,7 @@
crypto_alg_put(alg);
}
}
+EXPORT_SYMBOL_GPL(crypto_remove_final);
static void crypto_wait_for_test(struct crypto_larval *larval)
{
@@ -493,6 +492,7 @@
goto err;
inst->alg.cra_module = tmpl->module;
+ inst->alg.cra_flags |= CRYPTO_ALG_INSTANCE;
down_write(&crypto_alg_sem);
diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c
index 7a72192..2572d26 100644
--- a/crypto/blkcipher.c
+++ b/crypto/blkcipher.c
@@ -24,6 +24,8 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
#include "internal.h"
@@ -492,6 +494,28 @@
return crypto_init_blkcipher_ops_async(tfm);
}
+static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_blkcipher rblkcipher;
+
+ snprintf(rblkcipher.type, CRYPTO_MAX_ALG_NAME, "%s", "blkcipher");
+ snprintf(rblkcipher.geniv, CRYPTO_MAX_ALG_NAME, "%s",
+ alg->cra_blkcipher.geniv ?: "<default>");
+
+ rblkcipher.blocksize = alg->cra_blocksize;
+ rblkcipher.min_keysize = alg->cra_blkcipher.min_keysize;
+ rblkcipher.max_keysize = alg->cra_blkcipher.max_keysize;
+ rblkcipher.ivsize = alg->cra_blkcipher.ivsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_BLKCIPHER,
+ sizeof(struct crypto_report_blkcipher), &rblkcipher);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg)
@@ -511,6 +535,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_blkcipher_show,
#endif
+ .report = crypto_blkcipher_report,
};
EXPORT_SYMBOL_GPL(crypto_blkcipher_type);
diff --git a/crypto/blowfish.c b/crypto/blowfish.c
deleted file mode 100644
index a67d52e..0000000
--- a/crypto/blowfish.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * Cryptographic API.
- *
- * Blowfish Cipher Algorithm, by Bruce Schneier.
- * http://www.counterpane.com/blowfish.html
- *
- * Adapted from Kerneli implementation.
- *
- * Copyright (c) Herbert Valerio Riedel <hvr@hvrlab.org>
- * Copyright (c) Kyle McMartin <kyle@debian.org>
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <asm/byteorder.h>
-#include <linux/crypto.h>
-#include <linux/types.h>
-
-#define BF_BLOCK_SIZE 8
-#define BF_MIN_KEY_SIZE 4
-#define BF_MAX_KEY_SIZE 56
-
-struct bf_ctx {
- u32 p[18];
- u32 s[1024];
-};
-
-static const u32 bf_pbox[16 + 2] = {
- 0x243f6a88, 0x85a308d3, 0x13198a2e, 0x03707344,
- 0xa4093822, 0x299f31d0, 0x082efa98, 0xec4e6c89,
- 0x452821e6, 0x38d01377, 0xbe5466cf, 0x34e90c6c,
- 0xc0ac29b7, 0xc97c50dd, 0x3f84d5b5, 0xb5470917,
- 0x9216d5d9, 0x8979fb1b,
-};
-
-static const u32 bf_sbox[256 * 4] = {
- 0xd1310ba6, 0x98dfb5ac, 0x2ffd72db, 0xd01adfb7,
- 0xb8e1afed, 0x6a267e96, 0xba7c9045, 0xf12c7f99,
- 0x24a19947, 0xb3916cf7, 0x0801f2e2, 0x858efc16,
- 0x636920d8, 0x71574e69, 0xa458fea3, 0xf4933d7e,
- 0x0d95748f, 0x728eb658, 0x718bcd58, 0x82154aee,
- 0x7b54a41d, 0xc25a59b5, 0x9c30d539, 0x2af26013,
- 0xc5d1b023, 0x286085f0, 0xca417918, 0xb8db38ef,
- 0x8e79dcb0, 0x603a180e, 0x6c9e0e8b, 0xb01e8a3e,
- 0xd71577c1, 0xbd314b27, 0x78af2fda, 0x55605c60,
- 0xe65525f3, 0xaa55ab94, 0x57489862, 0x63e81440,
- 0x55ca396a, 0x2aab10b6, 0xb4cc5c34, 0x1141e8ce,
- 0xa15486af, 0x7c72e993, 0xb3ee1411, 0x636fbc2a,
- 0x2ba9c55d, 0x741831f6, 0xce5c3e16, 0x9b87931e,
- 0xafd6ba33, 0x6c24cf5c, 0x7a325381, 0x28958677,
- 0x3b8f4898, 0x6b4bb9af, 0xc4bfe81b, 0x66282193,
- 0x61d809cc, 0xfb21a991, 0x487cac60, 0x5dec8032,
- 0xef845d5d, 0xe98575b1, 0xdc262302, 0xeb651b88,
- 0x23893e81, 0xd396acc5, 0x0f6d6ff3, 0x83f44239,
- 0x2e0b4482, 0xa4842004, 0x69c8f04a, 0x9e1f9b5e,
- 0x21c66842, 0xf6e96c9a, 0x670c9c61, 0xabd388f0,
- 0x6a51a0d2, 0xd8542f68, 0x960fa728, 0xab5133a3,
- 0x6eef0b6c, 0x137a3be4, 0xba3bf050, 0x7efb2a98,
- 0xa1f1651d, 0x39af0176, 0x66ca593e, 0x82430e88,
- 0x8cee8619, 0x456f9fb4, 0x7d84a5c3, 0x3b8b5ebe,
- 0xe06f75d8, 0x85c12073, 0x401a449f, 0x56c16aa6,
- 0x4ed3aa62, 0x363f7706, 0x1bfedf72, 0x429b023d,
- 0x37d0d724, 0xd00a1248, 0xdb0fead3, 0x49f1c09b,
- 0x075372c9, 0x80991b7b, 0x25d479d8, 0xf6e8def7,
- 0xe3fe501a, 0xb6794c3b, 0x976ce0bd, 0x04c006ba,
- 0xc1a94fb6, 0x409f60c4, 0x5e5c9ec2, 0x196a2463,
- 0x68fb6faf, 0x3e6c53b5, 0x1339b2eb, 0x3b52ec6f,
- 0x6dfc511f, 0x9b30952c, 0xcc814544, 0xaf5ebd09,
- 0xbee3d004, 0xde334afd, 0x660f2807, 0x192e4bb3,
- 0xc0cba857, 0x45c8740f, 0xd20b5f39, 0xb9d3fbdb,
- 0x5579c0bd, 0x1a60320a, 0xd6a100c6, 0x402c7279,
- 0x679f25fe, 0xfb1fa3cc, 0x8ea5e9f8, 0xdb3222f8,
- 0x3c7516df, 0xfd616b15, 0x2f501ec8, 0xad0552ab,
- 0x323db5fa, 0xfd238760, 0x53317b48, 0x3e00df82,
- 0x9e5c57bb, 0xca6f8ca0, 0x1a87562e, 0xdf1769db,
- 0xd542a8f6, 0x287effc3, 0xac6732c6, 0x8c4f5573,
- 0x695b27b0, 0xbbca58c8, 0xe1ffa35d, 0xb8f011a0,
- 0x10fa3d98, 0xfd2183b8, 0x4afcb56c, 0x2dd1d35b,
- 0x9a53e479, 0xb6f84565, 0xd28e49bc, 0x4bfb9790,
- 0xe1ddf2da, 0xa4cb7e33, 0x62fb1341, 0xcee4c6e8,
- 0xef20cada, 0x36774c01, 0xd07e9efe, 0x2bf11fb4,
- 0x95dbda4d, 0xae909198, 0xeaad8e71, 0x6b93d5a0,
- 0xd08ed1d0, 0xafc725e0, 0x8e3c5b2f, 0x8e7594b7,
- 0x8ff6e2fb, 0xf2122b64, 0x8888b812, 0x900df01c,
- 0x4fad5ea0, 0x688fc31c, 0xd1cff191, 0xb3a8c1ad,
- 0x2f2f2218, 0xbe0e1777, 0xea752dfe, 0x8b021fa1,
- 0xe5a0cc0f, 0xb56f74e8, 0x18acf3d6, 0xce89e299,
- 0xb4a84fe0, 0xfd13e0b7, 0x7cc43b81, 0xd2ada8d9,
- 0x165fa266, 0x80957705, 0x93cc7314, 0x211a1477,
- 0xe6ad2065, 0x77b5fa86, 0xc75442f5, 0xfb9d35cf,
- 0xebcdaf0c, 0x7b3e89a0, 0xd6411bd3, 0xae1e7e49,
- 0x00250e2d, 0x2071b35e, 0x226800bb, 0x57b8e0af,
- 0x2464369b, 0xf009b91e, 0x5563911d, 0x59dfa6aa,
- 0x78c14389, 0xd95a537f, 0x207d5ba2, 0x02e5b9c5,
- 0x83260376, 0x6295cfa9, 0x11c81968, 0x4e734a41,
- 0xb3472dca, 0x7b14a94a, 0x1b510052, 0x9a532915,
- 0xd60f573f, 0xbc9bc6e4, 0x2b60a476, 0x81e67400,
- 0x08ba6fb5, 0x571be91f, 0xf296ec6b, 0x2a0dd915,
- 0xb6636521, 0xe7b9f9b6, 0xff34052e, 0xc5855664,
- 0x53b02d5d, 0xa99f8fa1, 0x08ba4799, 0x6e85076a,
- 0x4b7a70e9, 0xb5b32944, 0xdb75092e, 0xc4192623,
- 0xad6ea6b0, 0x49a7df7d, 0x9cee60b8, 0x8fedb266,
- 0xecaa8c71, 0x699a17ff, 0x5664526c, 0xc2b19ee1,
- 0x193602a5, 0x75094c29, 0xa0591340, 0xe4183a3e,
- 0x3f54989a, 0x5b429d65, 0x6b8fe4d6, 0x99f73fd6,
- 0xa1d29c07, 0xefe830f5, 0x4d2d38e6, 0xf0255dc1,
- 0x4cdd2086, 0x8470eb26, 0x6382e9c6, 0x021ecc5e,
- 0x09686b3f, 0x3ebaefc9, 0x3c971814, 0x6b6a70a1,
- 0x687f3584, 0x52a0e286, 0xb79c5305, 0xaa500737,
- 0x3e07841c, 0x7fdeae5c, 0x8e7d44ec, 0x5716f2b8,
- 0xb03ada37, 0xf0500c0d, 0xf01c1f04, 0x0200b3ff,
- 0xae0cf51a, 0x3cb574b2, 0x25837a58, 0xdc0921bd,
- 0xd19113f9, 0x7ca92ff6, 0x94324773, 0x22f54701,
- 0x3ae5e581, 0x37c2dadc, 0xc8b57634, 0x9af3dda7,
- 0xa9446146, 0x0fd0030e, 0xecc8c73e, 0xa4751e41,
- 0xe238cd99, 0x3bea0e2f, 0x3280bba1, 0x183eb331,
- 0x4e548b38, 0x4f6db908, 0x6f420d03, 0xf60a04bf,
- 0x2cb81290, 0x24977c79, 0x5679b072, 0xbcaf89af,
- 0xde9a771f, 0xd9930810, 0xb38bae12, 0xdccf3f2e,
- 0x5512721f, 0x2e6b7124, 0x501adde6, 0x9f84cd87,
- 0x7a584718, 0x7408da17, 0xbc9f9abc, 0xe94b7d8c,
- 0xec7aec3a, 0xdb851dfa, 0x63094366, 0xc464c3d2,
- 0xef1c1847, 0x3215d908, 0xdd433b37, 0x24c2ba16,
- 0x12a14d43, 0x2a65c451, 0x50940002, 0x133ae4dd,
- 0x71dff89e, 0x10314e55, 0x81ac77d6, 0x5f11199b,
- 0x043556f1, 0xd7a3c76b, 0x3c11183b, 0x5924a509,
- 0xf28fe6ed, 0x97f1fbfa, 0x9ebabf2c, 0x1e153c6e,
- 0x86e34570, 0xeae96fb1, 0x860e5e0a, 0x5a3e2ab3,
- 0x771fe71c, 0x4e3d06fa, 0x2965dcb9, 0x99e71d0f,
- 0x803e89d6, 0x5266c825, 0x2e4cc978, 0x9c10b36a,
- 0xc6150eba, 0x94e2ea78, 0xa5fc3c53, 0x1e0a2df4,
- 0xf2f74ea7, 0x361d2b3d, 0x1939260f, 0x19c27960,
- 0x5223a708, 0xf71312b6, 0xebadfe6e, 0xeac31f66,
- 0xe3bc4595, 0xa67bc883, 0xb17f37d1, 0x018cff28,
- 0xc332ddef, 0xbe6c5aa5, 0x65582185, 0x68ab9802,
- 0xeecea50f, 0xdb2f953b, 0x2aef7dad, 0x5b6e2f84,
- 0x1521b628, 0x29076170, 0xecdd4775, 0x619f1510,
- 0x13cca830, 0xeb61bd96, 0x0334fe1e, 0xaa0363cf,
- 0xb5735c90, 0x4c70a239, 0xd59e9e0b, 0xcbaade14,
- 0xeecc86bc, 0x60622ca7, 0x9cab5cab, 0xb2f3846e,
- 0x648b1eaf, 0x19bdf0ca, 0xa02369b9, 0x655abb50,
- 0x40685a32, 0x3c2ab4b3, 0x319ee9d5, 0xc021b8f7,
- 0x9b540b19, 0x875fa099, 0x95f7997e, 0x623d7da8,
- 0xf837889a, 0x97e32d77, 0x11ed935f, 0x16681281,
- 0x0e358829, 0xc7e61fd6, 0x96dedfa1, 0x7858ba99,
- 0x57f584a5, 0x1b227263, 0x9b83c3ff, 0x1ac24696,
- 0xcdb30aeb, 0x532e3054, 0x8fd948e4, 0x6dbc3128,
- 0x58ebf2ef, 0x34c6ffea, 0xfe28ed61, 0xee7c3c73,
- 0x5d4a14d9, 0xe864b7e3, 0x42105d14, 0x203e13e0,
- 0x45eee2b6, 0xa3aaabea, 0xdb6c4f15, 0xfacb4fd0,
- 0xc742f442, 0xef6abbb5, 0x654f3b1d, 0x41cd2105,
- 0xd81e799e, 0x86854dc7, 0xe44b476a, 0x3d816250,
- 0xcf62a1f2, 0x5b8d2646, 0xfc8883a0, 0xc1c7b6a3,
- 0x7f1524c3, 0x69cb7492, 0x47848a0b, 0x5692b285,
- 0x095bbf00, 0xad19489d, 0x1462b174, 0x23820e00,
- 0x58428d2a, 0x0c55f5ea, 0x1dadf43e, 0x233f7061,
- 0x3372f092, 0x8d937e41, 0xd65fecf1, 0x6c223bdb,
- 0x7cde3759, 0xcbee7460, 0x4085f2a7, 0xce77326e,
- 0xa6078084, 0x19f8509e, 0xe8efd855, 0x61d99735,
- 0xa969a7aa, 0xc50c06c2, 0x5a04abfc, 0x800bcadc,
- 0x9e447a2e, 0xc3453484, 0xfdd56705, 0x0e1e9ec9,
- 0xdb73dbd3, 0x105588cd, 0x675fda79, 0xe3674340,
- 0xc5c43465, 0x713e38d8, 0x3d28f89e, 0xf16dff20,
- 0x153e21e7, 0x8fb03d4a, 0xe6e39f2b, 0xdb83adf7,
- 0xe93d5a68, 0x948140f7, 0xf64c261c, 0x94692934,
- 0x411520f7, 0x7602d4f7, 0xbcf46b2e, 0xd4a20068,
- 0xd4082471, 0x3320f46a, 0x43b7d4b7, 0x500061af,
- 0x1e39f62e, 0x97244546, 0x14214f74, 0xbf8b8840,
- 0x4d95fc1d, 0x96b591af, 0x70f4ddd3, 0x66a02f45,
- 0xbfbc09ec, 0x03bd9785, 0x7fac6dd0, 0x31cb8504,
- 0x96eb27b3, 0x55fd3941, 0xda2547e6, 0xabca0a9a,
- 0x28507825, 0x530429f4, 0x0a2c86da, 0xe9b66dfb,
- 0x68dc1462, 0xd7486900, 0x680ec0a4, 0x27a18dee,
- 0x4f3ffea2, 0xe887ad8c, 0xb58ce006, 0x7af4d6b6,
- 0xaace1e7c, 0xd3375fec, 0xce78a399, 0x406b2a42,
- 0x20fe9e35, 0xd9f385b9, 0xee39d7ab, 0x3b124e8b,
- 0x1dc9faf7, 0x4b6d1856, 0x26a36631, 0xeae397b2,
- 0x3a6efa74, 0xdd5b4332, 0x6841e7f7, 0xca7820fb,
- 0xfb0af54e, 0xd8feb397, 0x454056ac, 0xba489527,
- 0x55533a3a, 0x20838d87, 0xfe6ba9b7, 0xd096954b,
- 0x55a867bc, 0xa1159a58, 0xcca92963, 0x99e1db33,
- 0xa62a4a56, 0x3f3125f9, 0x5ef47e1c, 0x9029317c,
- 0xfdf8e802, 0x04272f70, 0x80bb155c, 0x05282ce3,
- 0x95c11548, 0xe4c66d22, 0x48c1133f, 0xc70f86dc,
- 0x07f9c9ee, 0x41041f0f, 0x404779a4, 0x5d886e17,
- 0x325f51eb, 0xd59bc0d1, 0xf2bcc18f, 0x41113564,
- 0x257b7834, 0x602a9c60, 0xdff8e8a3, 0x1f636c1b,
- 0x0e12b4c2, 0x02e1329e, 0xaf664fd1, 0xcad18115,
- 0x6b2395e0, 0x333e92e1, 0x3b240b62, 0xeebeb922,
- 0x85b2a20e, 0xe6ba0d99, 0xde720c8c, 0x2da2f728,
- 0xd0127845, 0x95b794fd, 0x647d0862, 0xe7ccf5f0,
- 0x5449a36f, 0x877d48fa, 0xc39dfd27, 0xf33e8d1e,
- 0x0a476341, 0x992eff74, 0x3a6f6eab, 0xf4f8fd37,
- 0xa812dc60, 0xa1ebddf8, 0x991be14c, 0xdb6e6b0d,
- 0xc67b5510, 0x6d672c37, 0x2765d43b, 0xdcd0e804,
- 0xf1290dc7, 0xcc00ffa3, 0xb5390f92, 0x690fed0b,
- 0x667b9ffb, 0xcedb7d9c, 0xa091cf0b, 0xd9155ea3,
- 0xbb132f88, 0x515bad24, 0x7b9479bf, 0x763bd6eb,
- 0x37392eb3, 0xcc115979, 0x8026e297, 0xf42e312d,
- 0x6842ada7, 0xc66a2b3b, 0x12754ccc, 0x782ef11c,
- 0x6a124237, 0xb79251e7, 0x06a1bbe6, 0x4bfb6350,
- 0x1a6b1018, 0x11caedfa, 0x3d25bdd8, 0xe2e1c3c9,
- 0x44421659, 0x0a121386, 0xd90cec6e, 0xd5abea2a,
- 0x64af674e, 0xda86a85f, 0xbebfe988, 0x64e4c3fe,
- 0x9dbc8057, 0xf0f7c086, 0x60787bf8, 0x6003604d,
- 0xd1fd8346, 0xf6381fb0, 0x7745ae04, 0xd736fccc,
- 0x83426b33, 0xf01eab71, 0xb0804187, 0x3c005e5f,
- 0x77a057be, 0xbde8ae24, 0x55464299, 0xbf582e61,
- 0x4e58f48f, 0xf2ddfda2, 0xf474ef38, 0x8789bdc2,
- 0x5366f9c3, 0xc8b38e74, 0xb475f255, 0x46fcd9b9,
- 0x7aeb2661, 0x8b1ddf84, 0x846a0e79, 0x915f95e2,
- 0x466e598e, 0x20b45770, 0x8cd55591, 0xc902de4c,
- 0xb90bace1, 0xbb8205d0, 0x11a86248, 0x7574a99e,
- 0xb77f19b6, 0xe0a9dc09, 0x662d09a1, 0xc4324633,
- 0xe85a1f02, 0x09f0be8c, 0x4a99a025, 0x1d6efe10,
- 0x1ab93d1d, 0x0ba5a4df, 0xa186f20f, 0x2868f169,
- 0xdcb7da83, 0x573906fe, 0xa1e2ce9b, 0x4fcd7f52,
- 0x50115e01, 0xa70683fa, 0xa002b5c4, 0x0de6d027,
- 0x9af88c27, 0x773f8641, 0xc3604c06, 0x61a806b5,
- 0xf0177a28, 0xc0f586e0, 0x006058aa, 0x30dc7d62,
- 0x11e69ed7, 0x2338ea63, 0x53c2dd94, 0xc2c21634,
- 0xbbcbee56, 0x90bcb6de, 0xebfc7da1, 0xce591d76,
- 0x6f05e409, 0x4b7c0188, 0x39720a3d, 0x7c927c24,
- 0x86e3725f, 0x724d9db9, 0x1ac15bb4, 0xd39eb8fc,
- 0xed545578, 0x08fca5b5, 0xd83d7cd3, 0x4dad0fc4,
- 0x1e50ef5e, 0xb161e6f8, 0xa28514d9, 0x6c51133c,
- 0x6fd5c7e7, 0x56e14ec4, 0x362abfce, 0xddc6c837,
- 0xd79a3234, 0x92638212, 0x670efa8e, 0x406000e0,
- 0x3a39ce37, 0xd3faf5cf, 0xabc27737, 0x5ac52d1b,
- 0x5cb0679e, 0x4fa33742, 0xd3822740, 0x99bc9bbe,
- 0xd5118e9d, 0xbf0f7315, 0xd62d1c7e, 0xc700c47b,
- 0xb78c1b6b, 0x21a19045, 0xb26eb1be, 0x6a366eb4,
- 0x5748ab2f, 0xbc946e79, 0xc6a376d2, 0x6549c2c8,
- 0x530ff8ee, 0x468dde7d, 0xd5730a1d, 0x4cd04dc6,
- 0x2939bbdb, 0xa9ba4650, 0xac9526e8, 0xbe5ee304,
- 0xa1fad5f0, 0x6a2d519a, 0x63ef8ce2, 0x9a86ee22,
- 0xc089c2b8, 0x43242ef6, 0xa51e03aa, 0x9cf2d0a4,
- 0x83c061ba, 0x9be96a4d, 0x8fe51550, 0xba645bd6,
- 0x2826a2f9, 0xa73a3ae1, 0x4ba99586, 0xef5562e9,
- 0xc72fefd3, 0xf752f7da, 0x3f046f69, 0x77fa0a59,
- 0x80e4a915, 0x87b08601, 0x9b09e6ad, 0x3b3ee593,
- 0xe990fd5a, 0x9e34d797, 0x2cf0b7d9, 0x022b8b51,
- 0x96d5ac3a, 0x017da67d, 0xd1cf3ed6, 0x7c7d2d28,
- 0x1f9f25cf, 0xadf2b89b, 0x5ad6b472, 0x5a88f54c,
- 0xe029ac71, 0xe019a5e6, 0x47b0acfd, 0xed93fa9b,
- 0xe8d3c48d, 0x283b57cc, 0xf8d56629, 0x79132e28,
- 0x785f0191, 0xed756055, 0xf7960e44, 0xe3d35e8c,
- 0x15056dd4, 0x88f46dba, 0x03a16125, 0x0564f0bd,
- 0xc3eb9e15, 0x3c9057a2, 0x97271aec, 0xa93a072a,
- 0x1b3f6d9b, 0x1e6321f5, 0xf59c66fb, 0x26dcf319,
- 0x7533d928, 0xb155fdf5, 0x03563482, 0x8aba3cbb,
- 0x28517711, 0xc20ad9f8, 0xabcc5167, 0xccad925f,
- 0x4de81751, 0x3830dc8e, 0x379d5862, 0x9320f991,
- 0xea7a90c2, 0xfb3e7bce, 0x5121ce64, 0x774fbe32,
- 0xa8b6e37e, 0xc3293d46, 0x48de5369, 0x6413e680,
- 0xa2ae0810, 0xdd6db224, 0x69852dfd, 0x09072166,
- 0xb39a460a, 0x6445c0dd, 0x586cdecf, 0x1c20c8ae,
- 0x5bbef7dd, 0x1b588d40, 0xccd2017f, 0x6bb4e3bb,
- 0xdda26a7e, 0x3a59ff45, 0x3e350a44, 0xbcb4cdd5,
- 0x72eacea8, 0xfa6484bb, 0x8d6612ae, 0xbf3c6f47,
- 0xd29be463, 0x542f5d9e, 0xaec2771b, 0xf64e6370,
- 0x740e0d8d, 0xe75b1357, 0xf8721671, 0xaf537d5d,
- 0x4040cb08, 0x4eb4e2cc, 0x34d2466a, 0x0115af84,
- 0xe1b00428, 0x95983a1d, 0x06b89fb4, 0xce6ea048,
- 0x6f3f3b82, 0x3520ab82, 0x011a1d4b, 0x277227f8,
- 0x611560b1, 0xe7933fdc, 0xbb3a792b, 0x344525bd,
- 0xa08839e1, 0x51ce794b, 0x2f32c9b7, 0xa01fbac9,
- 0xe01cc87e, 0xbcc7d1f6, 0xcf0111c3, 0xa1e8aac7,
- 0x1a908749, 0xd44fbd9a, 0xd0dadecb, 0xd50ada38,
- 0x0339c32a, 0xc6913667, 0x8df9317c, 0xe0b12b4f,
- 0xf79e59b7, 0x43f5bb3a, 0xf2d519ff, 0x27d9459c,
- 0xbf97222c, 0x15e6fc2a, 0x0f91fc71, 0x9b941525,
- 0xfae59361, 0xceb69ceb, 0xc2a86459, 0x12baa8d1,
- 0xb6c1075e, 0xe3056a0c, 0x10d25065, 0xcb03a442,
- 0xe0ec6e0e, 0x1698db3b, 0x4c98a0be, 0x3278e964,
- 0x9f1f9532, 0xe0d392df, 0xd3a0342b, 0x8971f21e,
- 0x1b0a7441, 0x4ba3348c, 0xc5be7120, 0xc37632d8,
- 0xdf359f8d, 0x9b992f2e, 0xe60b6f47, 0x0fe3f11d,
- 0xe54cda54, 0x1edad891, 0xce6279cf, 0xcd3e7e6f,
- 0x1618b166, 0xfd2c1d05, 0x848fd2c5, 0xf6fb2299,
- 0xf523f357, 0xa6327623, 0x93a83531, 0x56cccd02,
- 0xacf08162, 0x5a75ebb5, 0x6e163697, 0x88d273cc,
- 0xde966292, 0x81b949d0, 0x4c50901b, 0x71c65614,
- 0xe6c6c7bd, 0x327a140a, 0x45e1d006, 0xc3f27b9a,
- 0xc9aa53fd, 0x62a80f00, 0xbb25bfe2, 0x35bdd2f6,
- 0x71126905, 0xb2040222, 0xb6cbcf7c, 0xcd769c2b,
- 0x53113ec0, 0x1640e3d3, 0x38abbd60, 0x2547adf0,
- 0xba38209c, 0xf746ce76, 0x77afa1c5, 0x20756060,
- 0x85cbfe4e, 0x8ae88dd8, 0x7aaaf9b0, 0x4cf9aa7e,
- 0x1948c25c, 0x02fb8a8c, 0x01c36ae4, 0xd6ebe1f9,
- 0x90d4f869, 0xa65cdea0, 0x3f09252d, 0xc208e69f,
- 0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
-};
-
-/*
- * Round loop unrolling macros, S is a pointer to a S-Box array
- * organized in 4 unsigned longs at a row.
- */
-#define GET32_3(x) (((x) & 0xff))
-#define GET32_2(x) (((x) >> (8)) & (0xff))
-#define GET32_1(x) (((x) >> (16)) & (0xff))
-#define GET32_0(x) (((x) >> (24)) & (0xff))
-
-#define bf_F(x) (((S[GET32_0(x)] + S[256 + GET32_1(x)]) ^ \
- S[512 + GET32_2(x)]) + S[768 + GET32_3(x)])
-
-#define ROUND(a, b, n) b ^= P[n]; a ^= bf_F (b)
-
-/*
- * The blowfish encipher, processes 64-bit blocks.
- * NOTE: This function MUSTN'T respect endianess
- */
-static void encrypt_block(struct bf_ctx *bctx, u32 *dst, u32 *src)
-{
- const u32 *P = bctx->p;
- const u32 *S = bctx->s;
- u32 yl = src[0];
- u32 yr = src[1];
-
- ROUND(yr, yl, 0);
- ROUND(yl, yr, 1);
- ROUND(yr, yl, 2);
- ROUND(yl, yr, 3);
- ROUND(yr, yl, 4);
- ROUND(yl, yr, 5);
- ROUND(yr, yl, 6);
- ROUND(yl, yr, 7);
- ROUND(yr, yl, 8);
- ROUND(yl, yr, 9);
- ROUND(yr, yl, 10);
- ROUND(yl, yr, 11);
- ROUND(yr, yl, 12);
- ROUND(yl, yr, 13);
- ROUND(yr, yl, 14);
- ROUND(yl, yr, 15);
-
- yl ^= P[16];
- yr ^= P[17];
-
- dst[0] = yr;
- dst[1] = yl;
-}
-
-static void bf_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-{
- const __be32 *in_blk = (const __be32 *)src;
- __be32 *const out_blk = (__be32 *)dst;
- u32 in32[2], out32[2];
-
- in32[0] = be32_to_cpu(in_blk[0]);
- in32[1] = be32_to_cpu(in_blk[1]);
- encrypt_block(crypto_tfm_ctx(tfm), out32, in32);
- out_blk[0] = cpu_to_be32(out32[0]);
- out_blk[1] = cpu_to_be32(out32[1]);
-}
-
-static void bf_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
-{
- struct bf_ctx *ctx = crypto_tfm_ctx(tfm);
- const __be32 *in_blk = (const __be32 *)src;
- __be32 *const out_blk = (__be32 *)dst;
- const u32 *P = ctx->p;
- const u32 *S = ctx->s;
- u32 yl = be32_to_cpu(in_blk[0]);
- u32 yr = be32_to_cpu(in_blk[1]);
-
- ROUND(yr, yl, 17);
- ROUND(yl, yr, 16);
- ROUND(yr, yl, 15);
- ROUND(yl, yr, 14);
- ROUND(yr, yl, 13);
- ROUND(yl, yr, 12);
- ROUND(yr, yl, 11);
- ROUND(yl, yr, 10);
- ROUND(yr, yl, 9);
- ROUND(yl, yr, 8);
- ROUND(yr, yl, 7);
- ROUND(yl, yr, 6);
- ROUND(yr, yl, 5);
- ROUND(yl, yr, 4);
- ROUND(yr, yl, 3);
- ROUND(yl, yr, 2);
-
- yl ^= P[1];
- yr ^= P[0];
-
- out_blk[0] = cpu_to_be32(yr);
- out_blk[1] = cpu_to_be32(yl);
-}
-
-/*
- * Calculates the blowfish S and P boxes for encryption and decryption.
- */
-static int bf_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
-{
- struct bf_ctx *ctx = crypto_tfm_ctx(tfm);
- u32 *P = ctx->p;
- u32 *S = ctx->s;
- short i, j, count;
- u32 data[2], temp;
-
- /* Copy the initialization s-boxes */
- for (i = 0, count = 0; i < 256; i++)
- for (j = 0; j < 4; j++, count++)
- S[count] = bf_sbox[count];
-
- /* Set the p-boxes */
- for (i = 0; i < 16 + 2; i++)
- P[i] = bf_pbox[i];
-
- /* Actual subkey generation */
- for (j = 0, i = 0; i < 16 + 2; i++) {
- temp = (((u32)key[j] << 24) |
- ((u32)key[(j + 1) % keylen] << 16) |
- ((u32)key[(j + 2) % keylen] << 8) |
- ((u32)key[(j + 3) % keylen]));
-
- P[i] = P[i] ^ temp;
- j = (j + 4) % keylen;
- }
-
- data[0] = 0x00000000;
- data[1] = 0x00000000;
-
- for (i = 0; i < 16 + 2; i += 2) {
- encrypt_block((struct bf_ctx *)ctx, data, data);
-
- P[i] = data[0];
- P[i + 1] = data[1];
- }
-
- for (i = 0; i < 4; i++) {
- for (j = 0, count = i * 256; j < 256; j += 2, count += 2) {
- encrypt_block((struct bf_ctx *)ctx, data, data);
-
- S[count] = data[0];
- S[count + 1] = data[1];
- }
- }
-
- /* Bruce says not to bother with the weak key check. */
- return 0;
-}
-
-static struct crypto_alg alg = {
- .cra_name = "blowfish",
- .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
- .cra_blocksize = BF_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct bf_ctx),
- .cra_alignmask = 3,
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(alg.cra_list),
- .cra_u = { .cipher = {
- .cia_min_keysize = BF_MIN_KEY_SIZE,
- .cia_max_keysize = BF_MAX_KEY_SIZE,
- .cia_setkey = bf_setkey,
- .cia_encrypt = bf_encrypt,
- .cia_decrypt = bf_decrypt } }
-};
-
-static int __init blowfish_mod_init(void)
-{
- return crypto_register_alg(&alg);
-}
-
-static void __exit blowfish_mod_fini(void)
-{
- crypto_unregister_alg(&alg);
-}
-
-module_init(blowfish_mod_init);
-module_exit(blowfish_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Blowfish Cipher Algorithm");
diff --git a/crypto/blowfish_common.c b/crypto/blowfish_common.c
new file mode 100644
index 0000000..f636aab0
--- /dev/null
+++ b/crypto/blowfish_common.c
@@ -0,0 +1,402 @@
+/*
+ * Cryptographic API.
+ *
+ * Common Blowfish algorithm parts shared between the c and assembler
+ * implementations.
+ *
+ * Blowfish Cipher Algorithm, by Bruce Schneier.
+ * http://www.counterpane.com/blowfish.html
+ *
+ * Adapted from Kerneli implementation.
+ *
+ * Copyright (c) Herbert Valerio Riedel <hvr@hvrlab.org>
+ * Copyright (c) Kyle McMartin <kyle@debian.org>
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <asm/byteorder.h>
+#include <linux/crypto.h>
+#include <linux/types.h>
+#include <crypto/blowfish.h>
+
+static const u32 bf_pbox[16 + 2] = {
+ 0x243f6a88, 0x85a308d3, 0x13198a2e, 0x03707344,
+ 0xa4093822, 0x299f31d0, 0x082efa98, 0xec4e6c89,
+ 0x452821e6, 0x38d01377, 0xbe5466cf, 0x34e90c6c,
+ 0xc0ac29b7, 0xc97c50dd, 0x3f84d5b5, 0xb5470917,
+ 0x9216d5d9, 0x8979fb1b,
+};
+
+static const u32 bf_sbox[256 * 4] = {
+ 0xd1310ba6, 0x98dfb5ac, 0x2ffd72db, 0xd01adfb7,
+ 0xb8e1afed, 0x6a267e96, 0xba7c9045, 0xf12c7f99,
+ 0x24a19947, 0xb3916cf7, 0x0801f2e2, 0x858efc16,
+ 0x636920d8, 0x71574e69, 0xa458fea3, 0xf4933d7e,
+ 0x0d95748f, 0x728eb658, 0x718bcd58, 0x82154aee,
+ 0x7b54a41d, 0xc25a59b5, 0x9c30d539, 0x2af26013,
+ 0xc5d1b023, 0x286085f0, 0xca417918, 0xb8db38ef,
+ 0x8e79dcb0, 0x603a180e, 0x6c9e0e8b, 0xb01e8a3e,
+ 0xd71577c1, 0xbd314b27, 0x78af2fda, 0x55605c60,
+ 0xe65525f3, 0xaa55ab94, 0x57489862, 0x63e81440,
+ 0x55ca396a, 0x2aab10b6, 0xb4cc5c34, 0x1141e8ce,
+ 0xa15486af, 0x7c72e993, 0xb3ee1411, 0x636fbc2a,
+ 0x2ba9c55d, 0x741831f6, 0xce5c3e16, 0x9b87931e,
+ 0xafd6ba33, 0x6c24cf5c, 0x7a325381, 0x28958677,
+ 0x3b8f4898, 0x6b4bb9af, 0xc4bfe81b, 0x66282193,
+ 0x61d809cc, 0xfb21a991, 0x487cac60, 0x5dec8032,
+ 0xef845d5d, 0xe98575b1, 0xdc262302, 0xeb651b88,
+ 0x23893e81, 0xd396acc5, 0x0f6d6ff3, 0x83f44239,
+ 0x2e0b4482, 0xa4842004, 0x69c8f04a, 0x9e1f9b5e,
+ 0x21c66842, 0xf6e96c9a, 0x670c9c61, 0xabd388f0,
+ 0x6a51a0d2, 0xd8542f68, 0x960fa728, 0xab5133a3,
+ 0x6eef0b6c, 0x137a3be4, 0xba3bf050, 0x7efb2a98,
+ 0xa1f1651d, 0x39af0176, 0x66ca593e, 0x82430e88,
+ 0x8cee8619, 0x456f9fb4, 0x7d84a5c3, 0x3b8b5ebe,
+ 0xe06f75d8, 0x85c12073, 0x401a449f, 0x56c16aa6,
+ 0x4ed3aa62, 0x363f7706, 0x1bfedf72, 0x429b023d,
+ 0x37d0d724, 0xd00a1248, 0xdb0fead3, 0x49f1c09b,
+ 0x075372c9, 0x80991b7b, 0x25d479d8, 0xf6e8def7,
+ 0xe3fe501a, 0xb6794c3b, 0x976ce0bd, 0x04c006ba,
+ 0xc1a94fb6, 0x409f60c4, 0x5e5c9ec2, 0x196a2463,
+ 0x68fb6faf, 0x3e6c53b5, 0x1339b2eb, 0x3b52ec6f,
+ 0x6dfc511f, 0x9b30952c, 0xcc814544, 0xaf5ebd09,
+ 0xbee3d004, 0xde334afd, 0x660f2807, 0x192e4bb3,
+ 0xc0cba857, 0x45c8740f, 0xd20b5f39, 0xb9d3fbdb,
+ 0x5579c0bd, 0x1a60320a, 0xd6a100c6, 0x402c7279,
+ 0x679f25fe, 0xfb1fa3cc, 0x8ea5e9f8, 0xdb3222f8,
+ 0x3c7516df, 0xfd616b15, 0x2f501ec8, 0xad0552ab,
+ 0x323db5fa, 0xfd238760, 0x53317b48, 0x3e00df82,
+ 0x9e5c57bb, 0xca6f8ca0, 0x1a87562e, 0xdf1769db,
+ 0xd542a8f6, 0x287effc3, 0xac6732c6, 0x8c4f5573,
+ 0x695b27b0, 0xbbca58c8, 0xe1ffa35d, 0xb8f011a0,
+ 0x10fa3d98, 0xfd2183b8, 0x4afcb56c, 0x2dd1d35b,
+ 0x9a53e479, 0xb6f84565, 0xd28e49bc, 0x4bfb9790,
+ 0xe1ddf2da, 0xa4cb7e33, 0x62fb1341, 0xcee4c6e8,
+ 0xef20cada, 0x36774c01, 0xd07e9efe, 0x2bf11fb4,
+ 0x95dbda4d, 0xae909198, 0xeaad8e71, 0x6b93d5a0,
+ 0xd08ed1d0, 0xafc725e0, 0x8e3c5b2f, 0x8e7594b7,
+ 0x8ff6e2fb, 0xf2122b64, 0x8888b812, 0x900df01c,
+ 0x4fad5ea0, 0x688fc31c, 0xd1cff191, 0xb3a8c1ad,
+ 0x2f2f2218, 0xbe0e1777, 0xea752dfe, 0x8b021fa1,
+ 0xe5a0cc0f, 0xb56f74e8, 0x18acf3d6, 0xce89e299,
+ 0xb4a84fe0, 0xfd13e0b7, 0x7cc43b81, 0xd2ada8d9,
+ 0x165fa266, 0x80957705, 0x93cc7314, 0x211a1477,
+ 0xe6ad2065, 0x77b5fa86, 0xc75442f5, 0xfb9d35cf,
+ 0xebcdaf0c, 0x7b3e89a0, 0xd6411bd3, 0xae1e7e49,
+ 0x00250e2d, 0x2071b35e, 0x226800bb, 0x57b8e0af,
+ 0x2464369b, 0xf009b91e, 0x5563911d, 0x59dfa6aa,
+ 0x78c14389, 0xd95a537f, 0x207d5ba2, 0x02e5b9c5,
+ 0x83260376, 0x6295cfa9, 0x11c81968, 0x4e734a41,
+ 0xb3472dca, 0x7b14a94a, 0x1b510052, 0x9a532915,
+ 0xd60f573f, 0xbc9bc6e4, 0x2b60a476, 0x81e67400,
+ 0x08ba6fb5, 0x571be91f, 0xf296ec6b, 0x2a0dd915,
+ 0xb6636521, 0xe7b9f9b6, 0xff34052e, 0xc5855664,
+ 0x53b02d5d, 0xa99f8fa1, 0x08ba4799, 0x6e85076a,
+ 0x4b7a70e9, 0xb5b32944, 0xdb75092e, 0xc4192623,
+ 0xad6ea6b0, 0x49a7df7d, 0x9cee60b8, 0x8fedb266,
+ 0xecaa8c71, 0x699a17ff, 0x5664526c, 0xc2b19ee1,
+ 0x193602a5, 0x75094c29, 0xa0591340, 0xe4183a3e,
+ 0x3f54989a, 0x5b429d65, 0x6b8fe4d6, 0x99f73fd6,
+ 0xa1d29c07, 0xefe830f5, 0x4d2d38e6, 0xf0255dc1,
+ 0x4cdd2086, 0x8470eb26, 0x6382e9c6, 0x021ecc5e,
+ 0x09686b3f, 0x3ebaefc9, 0x3c971814, 0x6b6a70a1,
+ 0x687f3584, 0x52a0e286, 0xb79c5305, 0xaa500737,
+ 0x3e07841c, 0x7fdeae5c, 0x8e7d44ec, 0x5716f2b8,
+ 0xb03ada37, 0xf0500c0d, 0xf01c1f04, 0x0200b3ff,
+ 0xae0cf51a, 0x3cb574b2, 0x25837a58, 0xdc0921bd,
+ 0xd19113f9, 0x7ca92ff6, 0x94324773, 0x22f54701,
+ 0x3ae5e581, 0x37c2dadc, 0xc8b57634, 0x9af3dda7,
+ 0xa9446146, 0x0fd0030e, 0xecc8c73e, 0xa4751e41,
+ 0xe238cd99, 0x3bea0e2f, 0x3280bba1, 0x183eb331,
+ 0x4e548b38, 0x4f6db908, 0x6f420d03, 0xf60a04bf,
+ 0x2cb81290, 0x24977c79, 0x5679b072, 0xbcaf89af,
+ 0xde9a771f, 0xd9930810, 0xb38bae12, 0xdccf3f2e,
+ 0x5512721f, 0x2e6b7124, 0x501adde6, 0x9f84cd87,
+ 0x7a584718, 0x7408da17, 0xbc9f9abc, 0xe94b7d8c,
+ 0xec7aec3a, 0xdb851dfa, 0x63094366, 0xc464c3d2,
+ 0xef1c1847, 0x3215d908, 0xdd433b37, 0x24c2ba16,
+ 0x12a14d43, 0x2a65c451, 0x50940002, 0x133ae4dd,
+ 0x71dff89e, 0x10314e55, 0x81ac77d6, 0x5f11199b,
+ 0x043556f1, 0xd7a3c76b, 0x3c11183b, 0x5924a509,
+ 0xf28fe6ed, 0x97f1fbfa, 0x9ebabf2c, 0x1e153c6e,
+ 0x86e34570, 0xeae96fb1, 0x860e5e0a, 0x5a3e2ab3,
+ 0x771fe71c, 0x4e3d06fa, 0x2965dcb9, 0x99e71d0f,
+ 0x803e89d6, 0x5266c825, 0x2e4cc978, 0x9c10b36a,
+ 0xc6150eba, 0x94e2ea78, 0xa5fc3c53, 0x1e0a2df4,
+ 0xf2f74ea7, 0x361d2b3d, 0x1939260f, 0x19c27960,
+ 0x5223a708, 0xf71312b6, 0xebadfe6e, 0xeac31f66,
+ 0xe3bc4595, 0xa67bc883, 0xb17f37d1, 0x018cff28,
+ 0xc332ddef, 0xbe6c5aa5, 0x65582185, 0x68ab9802,
+ 0xeecea50f, 0xdb2f953b, 0x2aef7dad, 0x5b6e2f84,
+ 0x1521b628, 0x29076170, 0xecdd4775, 0x619f1510,
+ 0x13cca830, 0xeb61bd96, 0x0334fe1e, 0xaa0363cf,
+ 0xb5735c90, 0x4c70a239, 0xd59e9e0b, 0xcbaade14,
+ 0xeecc86bc, 0x60622ca7, 0x9cab5cab, 0xb2f3846e,
+ 0x648b1eaf, 0x19bdf0ca, 0xa02369b9, 0x655abb50,
+ 0x40685a32, 0x3c2ab4b3, 0x319ee9d5, 0xc021b8f7,
+ 0x9b540b19, 0x875fa099, 0x95f7997e, 0x623d7da8,
+ 0xf837889a, 0x97e32d77, 0x11ed935f, 0x16681281,
+ 0x0e358829, 0xc7e61fd6, 0x96dedfa1, 0x7858ba99,
+ 0x57f584a5, 0x1b227263, 0x9b83c3ff, 0x1ac24696,
+ 0xcdb30aeb, 0x532e3054, 0x8fd948e4, 0x6dbc3128,
+ 0x58ebf2ef, 0x34c6ffea, 0xfe28ed61, 0xee7c3c73,
+ 0x5d4a14d9, 0xe864b7e3, 0x42105d14, 0x203e13e0,
+ 0x45eee2b6, 0xa3aaabea, 0xdb6c4f15, 0xfacb4fd0,
+ 0xc742f442, 0xef6abbb5, 0x654f3b1d, 0x41cd2105,
+ 0xd81e799e, 0x86854dc7, 0xe44b476a, 0x3d816250,
+ 0xcf62a1f2, 0x5b8d2646, 0xfc8883a0, 0xc1c7b6a3,
+ 0x7f1524c3, 0x69cb7492, 0x47848a0b, 0x5692b285,
+ 0x095bbf00, 0xad19489d, 0x1462b174, 0x23820e00,
+ 0x58428d2a, 0x0c55f5ea, 0x1dadf43e, 0x233f7061,
+ 0x3372f092, 0x8d937e41, 0xd65fecf1, 0x6c223bdb,
+ 0x7cde3759, 0xcbee7460, 0x4085f2a7, 0xce77326e,
+ 0xa6078084, 0x19f8509e, 0xe8efd855, 0x61d99735,
+ 0xa969a7aa, 0xc50c06c2, 0x5a04abfc, 0x800bcadc,
+ 0x9e447a2e, 0xc3453484, 0xfdd56705, 0x0e1e9ec9,
+ 0xdb73dbd3, 0x105588cd, 0x675fda79, 0xe3674340,
+ 0xc5c43465, 0x713e38d8, 0x3d28f89e, 0xf16dff20,
+ 0x153e21e7, 0x8fb03d4a, 0xe6e39f2b, 0xdb83adf7,
+ 0xe93d5a68, 0x948140f7, 0xf64c261c, 0x94692934,
+ 0x411520f7, 0x7602d4f7, 0xbcf46b2e, 0xd4a20068,
+ 0xd4082471, 0x3320f46a, 0x43b7d4b7, 0x500061af,
+ 0x1e39f62e, 0x97244546, 0x14214f74, 0xbf8b8840,
+ 0x4d95fc1d, 0x96b591af, 0x70f4ddd3, 0x66a02f45,
+ 0xbfbc09ec, 0x03bd9785, 0x7fac6dd0, 0x31cb8504,
+ 0x96eb27b3, 0x55fd3941, 0xda2547e6, 0xabca0a9a,
+ 0x28507825, 0x530429f4, 0x0a2c86da, 0xe9b66dfb,
+ 0x68dc1462, 0xd7486900, 0x680ec0a4, 0x27a18dee,
+ 0x4f3ffea2, 0xe887ad8c, 0xb58ce006, 0x7af4d6b6,
+ 0xaace1e7c, 0xd3375fec, 0xce78a399, 0x406b2a42,
+ 0x20fe9e35, 0xd9f385b9, 0xee39d7ab, 0x3b124e8b,
+ 0x1dc9faf7, 0x4b6d1856, 0x26a36631, 0xeae397b2,
+ 0x3a6efa74, 0xdd5b4332, 0x6841e7f7, 0xca7820fb,
+ 0xfb0af54e, 0xd8feb397, 0x454056ac, 0xba489527,
+ 0x55533a3a, 0x20838d87, 0xfe6ba9b7, 0xd096954b,
+ 0x55a867bc, 0xa1159a58, 0xcca92963, 0x99e1db33,
+ 0xa62a4a56, 0x3f3125f9, 0x5ef47e1c, 0x9029317c,
+ 0xfdf8e802, 0x04272f70, 0x80bb155c, 0x05282ce3,
+ 0x95c11548, 0xe4c66d22, 0x48c1133f, 0xc70f86dc,
+ 0x07f9c9ee, 0x41041f0f, 0x404779a4, 0x5d886e17,
+ 0x325f51eb, 0xd59bc0d1, 0xf2bcc18f, 0x41113564,
+ 0x257b7834, 0x602a9c60, 0xdff8e8a3, 0x1f636c1b,
+ 0x0e12b4c2, 0x02e1329e, 0xaf664fd1, 0xcad18115,
+ 0x6b2395e0, 0x333e92e1, 0x3b240b62, 0xeebeb922,
+ 0x85b2a20e, 0xe6ba0d99, 0xde720c8c, 0x2da2f728,
+ 0xd0127845, 0x95b794fd, 0x647d0862, 0xe7ccf5f0,
+ 0x5449a36f, 0x877d48fa, 0xc39dfd27, 0xf33e8d1e,
+ 0x0a476341, 0x992eff74, 0x3a6f6eab, 0xf4f8fd37,
+ 0xa812dc60, 0xa1ebddf8, 0x991be14c, 0xdb6e6b0d,
+ 0xc67b5510, 0x6d672c37, 0x2765d43b, 0xdcd0e804,
+ 0xf1290dc7, 0xcc00ffa3, 0xb5390f92, 0x690fed0b,
+ 0x667b9ffb, 0xcedb7d9c, 0xa091cf0b, 0xd9155ea3,
+ 0xbb132f88, 0x515bad24, 0x7b9479bf, 0x763bd6eb,
+ 0x37392eb3, 0xcc115979, 0x8026e297, 0xf42e312d,
+ 0x6842ada7, 0xc66a2b3b, 0x12754ccc, 0x782ef11c,
+ 0x6a124237, 0xb79251e7, 0x06a1bbe6, 0x4bfb6350,
+ 0x1a6b1018, 0x11caedfa, 0x3d25bdd8, 0xe2e1c3c9,
+ 0x44421659, 0x0a121386, 0xd90cec6e, 0xd5abea2a,
+ 0x64af674e, 0xda86a85f, 0xbebfe988, 0x64e4c3fe,
+ 0x9dbc8057, 0xf0f7c086, 0x60787bf8, 0x6003604d,
+ 0xd1fd8346, 0xf6381fb0, 0x7745ae04, 0xd736fccc,
+ 0x83426b33, 0xf01eab71, 0xb0804187, 0x3c005e5f,
+ 0x77a057be, 0xbde8ae24, 0x55464299, 0xbf582e61,
+ 0x4e58f48f, 0xf2ddfda2, 0xf474ef38, 0x8789bdc2,
+ 0x5366f9c3, 0xc8b38e74, 0xb475f255, 0x46fcd9b9,
+ 0x7aeb2661, 0x8b1ddf84, 0x846a0e79, 0x915f95e2,
+ 0x466e598e, 0x20b45770, 0x8cd55591, 0xc902de4c,
+ 0xb90bace1, 0xbb8205d0, 0x11a86248, 0x7574a99e,
+ 0xb77f19b6, 0xe0a9dc09, 0x662d09a1, 0xc4324633,
+ 0xe85a1f02, 0x09f0be8c, 0x4a99a025, 0x1d6efe10,
+ 0x1ab93d1d, 0x0ba5a4df, 0xa186f20f, 0x2868f169,
+ 0xdcb7da83, 0x573906fe, 0xa1e2ce9b, 0x4fcd7f52,
+ 0x50115e01, 0xa70683fa, 0xa002b5c4, 0x0de6d027,
+ 0x9af88c27, 0x773f8641, 0xc3604c06, 0x61a806b5,
+ 0xf0177a28, 0xc0f586e0, 0x006058aa, 0x30dc7d62,
+ 0x11e69ed7, 0x2338ea63, 0x53c2dd94, 0xc2c21634,
+ 0xbbcbee56, 0x90bcb6de, 0xebfc7da1, 0xce591d76,
+ 0x6f05e409, 0x4b7c0188, 0x39720a3d, 0x7c927c24,
+ 0x86e3725f, 0x724d9db9, 0x1ac15bb4, 0xd39eb8fc,
+ 0xed545578, 0x08fca5b5, 0xd83d7cd3, 0x4dad0fc4,
+ 0x1e50ef5e, 0xb161e6f8, 0xa28514d9, 0x6c51133c,
+ 0x6fd5c7e7, 0x56e14ec4, 0x362abfce, 0xddc6c837,
+ 0xd79a3234, 0x92638212, 0x670efa8e, 0x406000e0,
+ 0x3a39ce37, 0xd3faf5cf, 0xabc27737, 0x5ac52d1b,
+ 0x5cb0679e, 0x4fa33742, 0xd3822740, 0x99bc9bbe,
+ 0xd5118e9d, 0xbf0f7315, 0xd62d1c7e, 0xc700c47b,
+ 0xb78c1b6b, 0x21a19045, 0xb26eb1be, 0x6a366eb4,
+ 0x5748ab2f, 0xbc946e79, 0xc6a376d2, 0x6549c2c8,
+ 0x530ff8ee, 0x468dde7d, 0xd5730a1d, 0x4cd04dc6,
+ 0x2939bbdb, 0xa9ba4650, 0xac9526e8, 0xbe5ee304,
+ 0xa1fad5f0, 0x6a2d519a, 0x63ef8ce2, 0x9a86ee22,
+ 0xc089c2b8, 0x43242ef6, 0xa51e03aa, 0x9cf2d0a4,
+ 0x83c061ba, 0x9be96a4d, 0x8fe51550, 0xba645bd6,
+ 0x2826a2f9, 0xa73a3ae1, 0x4ba99586, 0xef5562e9,
+ 0xc72fefd3, 0xf752f7da, 0x3f046f69, 0x77fa0a59,
+ 0x80e4a915, 0x87b08601, 0x9b09e6ad, 0x3b3ee593,
+ 0xe990fd5a, 0x9e34d797, 0x2cf0b7d9, 0x022b8b51,
+ 0x96d5ac3a, 0x017da67d, 0xd1cf3ed6, 0x7c7d2d28,
+ 0x1f9f25cf, 0xadf2b89b, 0x5ad6b472, 0x5a88f54c,
+ 0xe029ac71, 0xe019a5e6, 0x47b0acfd, 0xed93fa9b,
+ 0xe8d3c48d, 0x283b57cc, 0xf8d56629, 0x79132e28,
+ 0x785f0191, 0xed756055, 0xf7960e44, 0xe3d35e8c,
+ 0x15056dd4, 0x88f46dba, 0x03a16125, 0x0564f0bd,
+ 0xc3eb9e15, 0x3c9057a2, 0x97271aec, 0xa93a072a,
+ 0x1b3f6d9b, 0x1e6321f5, 0xf59c66fb, 0x26dcf319,
+ 0x7533d928, 0xb155fdf5, 0x03563482, 0x8aba3cbb,
+ 0x28517711, 0xc20ad9f8, 0xabcc5167, 0xccad925f,
+ 0x4de81751, 0x3830dc8e, 0x379d5862, 0x9320f991,
+ 0xea7a90c2, 0xfb3e7bce, 0x5121ce64, 0x774fbe32,
+ 0xa8b6e37e, 0xc3293d46, 0x48de5369, 0x6413e680,
+ 0xa2ae0810, 0xdd6db224, 0x69852dfd, 0x09072166,
+ 0xb39a460a, 0x6445c0dd, 0x586cdecf, 0x1c20c8ae,
+ 0x5bbef7dd, 0x1b588d40, 0xccd2017f, 0x6bb4e3bb,
+ 0xdda26a7e, 0x3a59ff45, 0x3e350a44, 0xbcb4cdd5,
+ 0x72eacea8, 0xfa6484bb, 0x8d6612ae, 0xbf3c6f47,
+ 0xd29be463, 0x542f5d9e, 0xaec2771b, 0xf64e6370,
+ 0x740e0d8d, 0xe75b1357, 0xf8721671, 0xaf537d5d,
+ 0x4040cb08, 0x4eb4e2cc, 0x34d2466a, 0x0115af84,
+ 0xe1b00428, 0x95983a1d, 0x06b89fb4, 0xce6ea048,
+ 0x6f3f3b82, 0x3520ab82, 0x011a1d4b, 0x277227f8,
+ 0x611560b1, 0xe7933fdc, 0xbb3a792b, 0x344525bd,
+ 0xa08839e1, 0x51ce794b, 0x2f32c9b7, 0xa01fbac9,
+ 0xe01cc87e, 0xbcc7d1f6, 0xcf0111c3, 0xa1e8aac7,
+ 0x1a908749, 0xd44fbd9a, 0xd0dadecb, 0xd50ada38,
+ 0x0339c32a, 0xc6913667, 0x8df9317c, 0xe0b12b4f,
+ 0xf79e59b7, 0x43f5bb3a, 0xf2d519ff, 0x27d9459c,
+ 0xbf97222c, 0x15e6fc2a, 0x0f91fc71, 0x9b941525,
+ 0xfae59361, 0xceb69ceb, 0xc2a86459, 0x12baa8d1,
+ 0xb6c1075e, 0xe3056a0c, 0x10d25065, 0xcb03a442,
+ 0xe0ec6e0e, 0x1698db3b, 0x4c98a0be, 0x3278e964,
+ 0x9f1f9532, 0xe0d392df, 0xd3a0342b, 0x8971f21e,
+ 0x1b0a7441, 0x4ba3348c, 0xc5be7120, 0xc37632d8,
+ 0xdf359f8d, 0x9b992f2e, 0xe60b6f47, 0x0fe3f11d,
+ 0xe54cda54, 0x1edad891, 0xce6279cf, 0xcd3e7e6f,
+ 0x1618b166, 0xfd2c1d05, 0x848fd2c5, 0xf6fb2299,
+ 0xf523f357, 0xa6327623, 0x93a83531, 0x56cccd02,
+ 0xacf08162, 0x5a75ebb5, 0x6e163697, 0x88d273cc,
+ 0xde966292, 0x81b949d0, 0x4c50901b, 0x71c65614,
+ 0xe6c6c7bd, 0x327a140a, 0x45e1d006, 0xc3f27b9a,
+ 0xc9aa53fd, 0x62a80f00, 0xbb25bfe2, 0x35bdd2f6,
+ 0x71126905, 0xb2040222, 0xb6cbcf7c, 0xcd769c2b,
+ 0x53113ec0, 0x1640e3d3, 0x38abbd60, 0x2547adf0,
+ 0xba38209c, 0xf746ce76, 0x77afa1c5, 0x20756060,
+ 0x85cbfe4e, 0x8ae88dd8, 0x7aaaf9b0, 0x4cf9aa7e,
+ 0x1948c25c, 0x02fb8a8c, 0x01c36ae4, 0xd6ebe1f9,
+ 0x90d4f869, 0xa65cdea0, 0x3f09252d, 0xc208e69f,
+ 0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
+};
+
+/*
+ * Round loop unrolling macros, S is a pointer to a S-Box array
+ * organized in 4 unsigned longs at a row.
+ */
+#define GET32_3(x) (((x) & 0xff))
+#define GET32_2(x) (((x) >> (8)) & (0xff))
+#define GET32_1(x) (((x) >> (16)) & (0xff))
+#define GET32_0(x) (((x) >> (24)) & (0xff))
+
+#define bf_F(x) (((S[GET32_0(x)] + S[256 + GET32_1(x)]) ^ \
+ S[512 + GET32_2(x)]) + S[768 + GET32_3(x)])
+
+#define ROUND(a, b, n) ({ b ^= P[n]; a ^= bf_F(b); })
+
+/*
+ * The blowfish encipher, processes 64-bit blocks.
+ * NOTE: This function MUSTN'T respect endianess
+ */
+static void encrypt_block(struct bf_ctx *bctx, u32 *dst, u32 *src)
+{
+ const u32 *P = bctx->p;
+ const u32 *S = bctx->s;
+ u32 yl = src[0];
+ u32 yr = src[1];
+
+ ROUND(yr, yl, 0);
+ ROUND(yl, yr, 1);
+ ROUND(yr, yl, 2);
+ ROUND(yl, yr, 3);
+ ROUND(yr, yl, 4);
+ ROUND(yl, yr, 5);
+ ROUND(yr, yl, 6);
+ ROUND(yl, yr, 7);
+ ROUND(yr, yl, 8);
+ ROUND(yl, yr, 9);
+ ROUND(yr, yl, 10);
+ ROUND(yl, yr, 11);
+ ROUND(yr, yl, 12);
+ ROUND(yl, yr, 13);
+ ROUND(yr, yl, 14);
+ ROUND(yl, yr, 15);
+
+ yl ^= P[16];
+ yr ^= P[17];
+
+ dst[0] = yr;
+ dst[1] = yl;
+}
+
+/*
+ * Calculates the blowfish S and P boxes for encryption and decryption.
+ */
+int blowfish_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
+{
+ struct bf_ctx *ctx = crypto_tfm_ctx(tfm);
+ u32 *P = ctx->p;
+ u32 *S = ctx->s;
+ short i, j, count;
+ u32 data[2], temp;
+
+ /* Copy the initialization s-boxes */
+ for (i = 0, count = 0; i < 256; i++)
+ for (j = 0; j < 4; j++, count++)
+ S[count] = bf_sbox[count];
+
+ /* Set the p-boxes */
+ for (i = 0; i < 16 + 2; i++)
+ P[i] = bf_pbox[i];
+
+ /* Actual subkey generation */
+ for (j = 0, i = 0; i < 16 + 2; i++) {
+ temp = (((u32)key[j] << 24) |
+ ((u32)key[(j + 1) % keylen] << 16) |
+ ((u32)key[(j + 2) % keylen] << 8) |
+ ((u32)key[(j + 3) % keylen]));
+
+ P[i] = P[i] ^ temp;
+ j = (j + 4) % keylen;
+ }
+
+ data[0] = 0x00000000;
+ data[1] = 0x00000000;
+
+ for (i = 0; i < 16 + 2; i += 2) {
+ encrypt_block((struct bf_ctx *)ctx, data, data);
+
+ P[i] = data[0];
+ P[i + 1] = data[1];
+ }
+
+ for (i = 0; i < 4; i++) {
+ for (j = 0, count = i * 256; j < 256; j += 2, count += 2) {
+ encrypt_block((struct bf_ctx *)ctx, data, data);
+
+ S[count] = data[0];
+ S[count + 1] = data[1];
+ }
+ }
+
+ /* Bruce says not to bother with the weak key check. */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(blowfish_setkey);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Blowfish Cipher common functions");
diff --git a/crypto/blowfish_generic.c b/crypto/blowfish_generic.c
new file mode 100644
index 0000000..6f269b5
--- /dev/null
+++ b/crypto/blowfish_generic.c
@@ -0,0 +1,142 @@
+/*
+ * Cryptographic API.
+ *
+ * Blowfish Cipher Algorithm, by Bruce Schneier.
+ * http://www.counterpane.com/blowfish.html
+ *
+ * Adapted from Kerneli implementation.
+ *
+ * Copyright (c) Herbert Valerio Riedel <hvr@hvrlab.org>
+ * Copyright (c) Kyle McMartin <kyle@debian.org>
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <asm/byteorder.h>
+#include <linux/crypto.h>
+#include <linux/types.h>
+#include <crypto/blowfish.h>
+
+/*
+ * Round loop unrolling macros, S is a pointer to a S-Box array
+ * organized in 4 unsigned longs at a row.
+ */
+#define GET32_3(x) (((x) & 0xff))
+#define GET32_2(x) (((x) >> (8)) & (0xff))
+#define GET32_1(x) (((x) >> (16)) & (0xff))
+#define GET32_0(x) (((x) >> (24)) & (0xff))
+
+#define bf_F(x) (((S[GET32_0(x)] + S[256 + GET32_1(x)]) ^ \
+ S[512 + GET32_2(x)]) + S[768 + GET32_3(x)])
+
+#define ROUND(a, b, n) ({ b ^= P[n]; a ^= bf_F(b); })
+
+static void bf_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ struct bf_ctx *ctx = crypto_tfm_ctx(tfm);
+ const __be32 *in_blk = (const __be32 *)src;
+ __be32 *const out_blk = (__be32 *)dst;
+ const u32 *P = ctx->p;
+ const u32 *S = ctx->s;
+ u32 yl = be32_to_cpu(in_blk[0]);
+ u32 yr = be32_to_cpu(in_blk[1]);
+
+ ROUND(yr, yl, 0);
+ ROUND(yl, yr, 1);
+ ROUND(yr, yl, 2);
+ ROUND(yl, yr, 3);
+ ROUND(yr, yl, 4);
+ ROUND(yl, yr, 5);
+ ROUND(yr, yl, 6);
+ ROUND(yl, yr, 7);
+ ROUND(yr, yl, 8);
+ ROUND(yl, yr, 9);
+ ROUND(yr, yl, 10);
+ ROUND(yl, yr, 11);
+ ROUND(yr, yl, 12);
+ ROUND(yl, yr, 13);
+ ROUND(yr, yl, 14);
+ ROUND(yl, yr, 15);
+
+ yl ^= P[16];
+ yr ^= P[17];
+
+ out_blk[0] = cpu_to_be32(yr);
+ out_blk[1] = cpu_to_be32(yl);
+}
+
+static void bf_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ struct bf_ctx *ctx = crypto_tfm_ctx(tfm);
+ const __be32 *in_blk = (const __be32 *)src;
+ __be32 *const out_blk = (__be32 *)dst;
+ const u32 *P = ctx->p;
+ const u32 *S = ctx->s;
+ u32 yl = be32_to_cpu(in_blk[0]);
+ u32 yr = be32_to_cpu(in_blk[1]);
+
+ ROUND(yr, yl, 17);
+ ROUND(yl, yr, 16);
+ ROUND(yr, yl, 15);
+ ROUND(yl, yr, 14);
+ ROUND(yr, yl, 13);
+ ROUND(yl, yr, 12);
+ ROUND(yr, yl, 11);
+ ROUND(yl, yr, 10);
+ ROUND(yr, yl, 9);
+ ROUND(yl, yr, 8);
+ ROUND(yr, yl, 7);
+ ROUND(yl, yr, 6);
+ ROUND(yr, yl, 5);
+ ROUND(yl, yr, 4);
+ ROUND(yr, yl, 3);
+ ROUND(yl, yr, 2);
+
+ yl ^= P[1];
+ yr ^= P[0];
+
+ out_blk[0] = cpu_to_be32(yr);
+ out_blk[1] = cpu_to_be32(yl);
+}
+
+static struct crypto_alg alg = {
+ .cra_name = "blowfish",
+ .cra_driver_name = "blowfish-generic",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = BF_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct bf_ctx),
+ .cra_alignmask = 3,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(alg.cra_list),
+ .cra_u = { .cipher = {
+ .cia_min_keysize = BF_MIN_KEY_SIZE,
+ .cia_max_keysize = BF_MAX_KEY_SIZE,
+ .cia_setkey = blowfish_setkey,
+ .cia_encrypt = bf_encrypt,
+ .cia_decrypt = bf_decrypt } }
+};
+
+static int __init blowfish_mod_init(void)
+{
+ return crypto_register_alg(&alg);
+}
+
+static void __exit blowfish_mod_fini(void)
+{
+ crypto_unregister_alg(&alg);
+}
+
+module_init(blowfish_mod_init);
+module_exit(blowfish_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Blowfish Cipher Algorithm");
+MODULE_ALIAS("blowfish");
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index e46d21a..671d4d6 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -945,7 +945,7 @@
crypto_unregister_template(&cryptd_tmpl);
}
-module_init(cryptd_init);
+subsys_initcall(cryptd_init);
module_exit(cryptd_exit);
MODULE_LICENSE("GPL");
diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c
new file mode 100644
index 0000000..2abca78
--- /dev/null
+++ b/crypto/crypto_user.c
@@ -0,0 +1,438 @@
+/*
+ * Crypto user configuration API.
+ *
+ * Copyright (C) 2011 secunet Security Networks AG
+ * Copyright (C) 2011 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
+#include <linux/security.h>
+#include <net/net_namespace.h>
+#include "internal.h"
+
+DEFINE_MUTEX(crypto_cfg_mutex);
+
+/* The crypto netlink socket */
+static struct sock *crypto_nlsk;
+
+struct crypto_dump_info {
+ struct sk_buff *in_skb;
+ struct sk_buff *out_skb;
+ u32 nlmsg_seq;
+ u16 nlmsg_flags;
+};
+
+static struct crypto_alg *crypto_alg_match(struct crypto_user_alg *p, int exact)
+{
+ struct crypto_alg *q, *alg = NULL;
+
+ down_read(&crypto_alg_sem);
+
+ if (list_empty(&crypto_alg_list))
+ return NULL;
+
+ list_for_each_entry(q, &crypto_alg_list, cra_list) {
+ int match = 0;
+
+ if ((q->cra_flags ^ p->cru_type) & p->cru_mask)
+ continue;
+
+ if (strlen(p->cru_driver_name))
+ match = !strcmp(q->cra_driver_name,
+ p->cru_driver_name);
+ else if (!exact)
+ match = !strcmp(q->cra_name, p->cru_name);
+
+ if (match) {
+ alg = q;
+ break;
+ }
+ }
+
+ up_read(&crypto_alg_sem);
+
+ return alg;
+}
+
+static int crypto_report_cipher(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_cipher rcipher;
+
+ snprintf(rcipher.type, CRYPTO_MAX_ALG_NAME, "%s", "cipher");
+
+ rcipher.blocksize = alg->cra_blocksize;
+ rcipher.min_keysize = alg->cra_cipher.cia_min_keysize;
+ rcipher.max_keysize = alg->cra_cipher.cia_max_keysize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_CIPHER,
+ sizeof(struct crypto_report_cipher), &rcipher);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
+static int crypto_report_comp(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_comp rcomp;
+
+ snprintf(rcomp.type, CRYPTO_MAX_ALG_NAME, "%s", "compression");
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_COMPRESS,
+ sizeof(struct crypto_report_comp), &rcomp);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
+static int crypto_report_one(struct crypto_alg *alg,
+ struct crypto_user_alg *ualg, struct sk_buff *skb)
+{
+ memcpy(&ualg->cru_name, &alg->cra_name, sizeof(ualg->cru_name));
+ memcpy(&ualg->cru_driver_name, &alg->cra_driver_name,
+ sizeof(ualg->cru_driver_name));
+ memcpy(&ualg->cru_module_name, module_name(alg->cra_module),
+ CRYPTO_MAX_ALG_NAME);
+
+ ualg->cru_flags = alg->cra_flags;
+ ualg->cru_refcnt = atomic_read(&alg->cra_refcnt);
+
+ NLA_PUT_U32(skb, CRYPTOCFGA_PRIORITY_VAL, alg->cra_priority);
+
+ if (alg->cra_flags & CRYPTO_ALG_LARVAL) {
+ struct crypto_report_larval rl;
+
+ snprintf(rl.type, CRYPTO_MAX_ALG_NAME, "%s", "larval");
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_LARVAL,
+ sizeof(struct crypto_report_larval), &rl);
+
+ goto out;
+ }
+
+ if (alg->cra_type && alg->cra_type->report) {
+ if (alg->cra_type->report(skb, alg))
+ goto nla_put_failure;
+
+ goto out;
+ }
+
+ switch (alg->cra_flags & (CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_LARVAL)) {
+ case CRYPTO_ALG_TYPE_CIPHER:
+ if (crypto_report_cipher(skb, alg))
+ goto nla_put_failure;
+
+ break;
+ case CRYPTO_ALG_TYPE_COMPRESS:
+ if (crypto_report_comp(skb, alg))
+ goto nla_put_failure;
+
+ break;
+ }
+
+out:
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
+static int crypto_report_alg(struct crypto_alg *alg,
+ struct crypto_dump_info *info)
+{
+ struct sk_buff *in_skb = info->in_skb;
+ struct sk_buff *skb = info->out_skb;
+ struct nlmsghdr *nlh;
+ struct crypto_user_alg *ualg;
+ int err = 0;
+
+ nlh = nlmsg_put(skb, NETLINK_CB(in_skb).pid, info->nlmsg_seq,
+ CRYPTO_MSG_GETALG, sizeof(*ualg), info->nlmsg_flags);
+ if (!nlh) {
+ err = -EMSGSIZE;
+ goto out;
+ }
+
+ ualg = nlmsg_data(nlh);
+
+ err = crypto_report_one(alg, ualg, skb);
+ if (err) {
+ nlmsg_cancel(skb, nlh);
+ goto out;
+ }
+
+ nlmsg_end(skb, nlh);
+
+out:
+ return err;
+}
+
+static int crypto_report(struct sk_buff *in_skb, struct nlmsghdr *in_nlh,
+ struct nlattr **attrs)
+{
+ struct crypto_user_alg *p = nlmsg_data(in_nlh);
+ struct crypto_alg *alg;
+ struct sk_buff *skb;
+ struct crypto_dump_info info;
+ int err;
+
+ if (!p->cru_driver_name)
+ return -EINVAL;
+
+ alg = crypto_alg_match(p, 1);
+ if (!alg)
+ return -ENOENT;
+
+ skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ info.in_skb = in_skb;
+ info.out_skb = skb;
+ info.nlmsg_seq = in_nlh->nlmsg_seq;
+ info.nlmsg_flags = 0;
+
+ err = crypto_report_alg(alg, &info);
+ if (err)
+ return err;
+
+ return nlmsg_unicast(crypto_nlsk, skb, NETLINK_CB(in_skb).pid);
+}
+
+static int crypto_dump_report(struct sk_buff *skb, struct netlink_callback *cb)
+{
+ struct crypto_alg *alg;
+ struct crypto_dump_info info;
+ int err;
+
+ if (cb->args[0])
+ goto out;
+
+ cb->args[0] = 1;
+
+ info.in_skb = cb->skb;
+ info.out_skb = skb;
+ info.nlmsg_seq = cb->nlh->nlmsg_seq;
+ info.nlmsg_flags = NLM_F_MULTI;
+
+ list_for_each_entry(alg, &crypto_alg_list, cra_list) {
+ err = crypto_report_alg(alg, &info);
+ if (err)
+ goto out_err;
+ }
+
+out:
+ return skb->len;
+out_err:
+ return err;
+}
+
+static int crypto_dump_report_done(struct netlink_callback *cb)
+{
+ return 0;
+}
+
+static int crypto_update_alg(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct nlattr **attrs)
+{
+ struct crypto_alg *alg;
+ struct crypto_user_alg *p = nlmsg_data(nlh);
+ struct nlattr *priority = attrs[CRYPTOCFGA_PRIORITY_VAL];
+ LIST_HEAD(list);
+
+ if (priority && !strlen(p->cru_driver_name))
+ return -EINVAL;
+
+ alg = crypto_alg_match(p, 1);
+ if (!alg)
+ return -ENOENT;
+
+ down_write(&crypto_alg_sem);
+
+ crypto_remove_spawns(alg, &list, NULL);
+
+ if (priority)
+ alg->cra_priority = nla_get_u32(priority);
+
+ up_write(&crypto_alg_sem);
+
+ crypto_remove_final(&list);
+
+ return 0;
+}
+
+static int crypto_del_alg(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct nlattr **attrs)
+{
+ struct crypto_alg *alg;
+ struct crypto_user_alg *p = nlmsg_data(nlh);
+
+ alg = crypto_alg_match(p, 1);
+ if (!alg)
+ return -ENOENT;
+
+ /* We can not unregister core algorithms such as aes-generic.
+ * We would loose the reference in the crypto_alg_list to this algorithm
+ * if we try to unregister. Unregistering such an algorithm without
+ * removing the module is not possible, so we restrict to crypto
+ * instances that are build from templates. */
+ if (!(alg->cra_flags & CRYPTO_ALG_INSTANCE))
+ return -EINVAL;
+
+ if (atomic_read(&alg->cra_refcnt) != 1)
+ return -EBUSY;
+
+ return crypto_unregister_alg(alg);
+}
+
+static int crypto_add_alg(struct sk_buff *skb, struct nlmsghdr *nlh,
+ struct nlattr **attrs)
+{
+ int exact;
+ const char *name;
+ struct crypto_alg *alg;
+ struct crypto_user_alg *p = nlmsg_data(nlh);
+ struct nlattr *priority = attrs[CRYPTOCFGA_PRIORITY_VAL];
+
+ if (strlen(p->cru_driver_name))
+ exact = 1;
+
+ if (priority && !exact)
+ return -EINVAL;
+
+ alg = crypto_alg_match(p, exact);
+ if (alg)
+ return -EEXIST;
+
+ if (strlen(p->cru_driver_name))
+ name = p->cru_driver_name;
+ else
+ name = p->cru_name;
+
+ alg = crypto_alg_mod_lookup(name, p->cru_type, p->cru_mask);
+ if (IS_ERR(alg))
+ return PTR_ERR(alg);
+
+ down_write(&crypto_alg_sem);
+
+ if (priority)
+ alg->cra_priority = nla_get_u32(priority);
+
+ up_write(&crypto_alg_sem);
+
+ crypto_mod_put(alg);
+
+ return 0;
+}
+
+#define MSGSIZE(type) sizeof(struct type)
+
+static const int crypto_msg_min[CRYPTO_NR_MSGTYPES] = {
+ [CRYPTO_MSG_NEWALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
+ [CRYPTO_MSG_DELALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
+ [CRYPTO_MSG_UPDATEALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
+ [CRYPTO_MSG_GETALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg),
+};
+
+static const struct nla_policy crypto_policy[CRYPTOCFGA_MAX+1] = {
+ [CRYPTOCFGA_PRIORITY_VAL] = { .type = NLA_U32},
+};
+
+#undef MSGSIZE
+
+static struct crypto_link {
+ int (*doit)(struct sk_buff *, struct nlmsghdr *, struct nlattr **);
+ int (*dump)(struct sk_buff *, struct netlink_callback *);
+ int (*done)(struct netlink_callback *);
+} crypto_dispatch[CRYPTO_NR_MSGTYPES] = {
+ [CRYPTO_MSG_NEWALG - CRYPTO_MSG_BASE] = { .doit = crypto_add_alg},
+ [CRYPTO_MSG_DELALG - CRYPTO_MSG_BASE] = { .doit = crypto_del_alg},
+ [CRYPTO_MSG_UPDATEALG - CRYPTO_MSG_BASE] = { .doit = crypto_update_alg},
+ [CRYPTO_MSG_GETALG - CRYPTO_MSG_BASE] = { .doit = crypto_report,
+ .dump = crypto_dump_report,
+ .done = crypto_dump_report_done},
+};
+
+static int crypto_user_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
+{
+ struct nlattr *attrs[CRYPTOCFGA_MAX+1];
+ struct crypto_link *link;
+ int type, err;
+
+ type = nlh->nlmsg_type;
+ if (type > CRYPTO_MSG_MAX)
+ return -EINVAL;
+
+ type -= CRYPTO_MSG_BASE;
+ link = &crypto_dispatch[type];
+
+ if (security_netlink_recv(skb, CAP_NET_ADMIN))
+ return -EPERM;
+
+ if ((type == (CRYPTO_MSG_GETALG - CRYPTO_MSG_BASE) &&
+ (nlh->nlmsg_flags & NLM_F_DUMP))) {
+ if (link->dump == NULL)
+ return -EINVAL;
+
+ return netlink_dump_start(crypto_nlsk, skb, nlh,
+ link->dump, link->done, 0);
+ }
+
+ err = nlmsg_parse(nlh, crypto_msg_min[type], attrs, CRYPTOCFGA_MAX,
+ crypto_policy);
+ if (err < 0)
+ return err;
+
+ if (link->doit == NULL)
+ return -EINVAL;
+
+ return link->doit(skb, nlh, attrs);
+}
+
+static void crypto_netlink_rcv(struct sk_buff *skb)
+{
+ mutex_lock(&crypto_cfg_mutex);
+ netlink_rcv_skb(skb, &crypto_user_rcv_msg);
+ mutex_unlock(&crypto_cfg_mutex);
+}
+
+static int __init crypto_user_init(void)
+{
+ crypto_nlsk = netlink_kernel_create(&init_net, NETLINK_CRYPTO,
+ 0, crypto_netlink_rcv,
+ NULL, THIS_MODULE);
+ if (!crypto_nlsk)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void __exit crypto_user_exit(void)
+{
+ netlink_kernel_release(crypto_nlsk);
+}
+
+module_init(crypto_user_init);
+module_exit(crypto_user_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steffen Klassert <steffen.klassert@secunet.com>");
+MODULE_DESCRIPTION("Crypto userspace configuration API");
diff --git a/crypto/internal.h b/crypto/internal.h
index d4384b0..b865ca1a 100644
--- a/crypto/internal.h
+++ b/crypto/internal.h
@@ -86,6 +86,9 @@
void crypto_larval_error(const char *name, u32 type, u32 mask);
void crypto_alg_tested(const char *name, int err);
+void crypto_remove_spawns(struct crypto_alg *alg, struct list_head *list,
+ struct crypto_alg *nalg);
+void crypto_remove_final(struct list_head *list);
void crypto_shoot_alg(struct crypto_alg *alg);
struct crypto_tfm *__crypto_alloc_tfm(struct crypto_alg *alg, u32 type,
u32 mask);
diff --git a/crypto/pcompress.c b/crypto/pcompress.c
index f7c4a7d..fefda78 100644
--- a/crypto/pcompress.c
+++ b/crypto/pcompress.c
@@ -24,6 +24,8 @@
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/string.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
#include <crypto/compress.h>
#include <crypto/internal/compress.h>
@@ -46,6 +48,21 @@
return 0;
}
+static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_comp rpcomp;
+
+ snprintf(rpcomp.type, CRYPTO_MAX_ALG_NAME, "%s", "pcomp");
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_COMPRESS,
+ sizeof(struct crypto_report_comp), &rpcomp);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg)
@@ -60,6 +77,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_pcomp_show,
#endif
+ .report = crypto_pcomp_report,
.maskclear = ~CRYPTO_ALG_TYPE_MASK,
.maskset = CRYPTO_ALG_TYPE_MASK,
.type = CRYPTO_ALG_TYPE_PCOMPRESS,
diff --git a/crypto/rng.c b/crypto/rng.c
index 45229ae..feb7de0 100644
--- a/crypto/rng.c
+++ b/crypto/rng.c
@@ -21,6 +21,8 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
static DEFINE_MUTEX(crypto_default_rng_lock);
struct crypto_rng *crypto_default_rng;
@@ -58,6 +60,23 @@
return 0;
}
+static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_rng rrng;
+
+ snprintf(rrng.type, CRYPTO_MAX_ALG_NAME, "%s", "rng");
+
+ rrng.seedsize = alg->cra_rng.seedsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_RNG,
+ sizeof(struct crypto_report_rng), &rrng);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_rng_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_rng_show(struct seq_file *m, struct crypto_alg *alg)
@@ -78,6 +97,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_rng_show,
#endif
+ .report = crypto_rng_report,
};
EXPORT_SYMBOL_GPL(crypto_rng_type);
diff --git a/crypto/sha1_generic.c b/crypto/sha1_generic.c
index 00ae60e..4279480 100644
--- a/crypto/sha1_generic.c
+++ b/crypto/sha1_generic.c
@@ -36,7 +36,7 @@
return 0;
}
-static int sha1_update(struct shash_desc *desc, const u8 *data,
+int crypto_sha1_update(struct shash_desc *desc, const u8 *data,
unsigned int len)
{
struct sha1_state *sctx = shash_desc_ctx(desc);
@@ -71,6 +71,7 @@
return 0;
}
+EXPORT_SYMBOL(crypto_sha1_update);
/* Add padding and return the message digest. */
@@ -87,10 +88,10 @@
/* Pad out to 56 mod 64 */
index = sctx->count & 0x3f;
padlen = (index < 56) ? (56 - index) : ((64+56) - index);
- sha1_update(desc, padding, padlen);
+ crypto_sha1_update(desc, padding, padlen);
/* Append length */
- sha1_update(desc, (const u8 *)&bits, sizeof(bits));
+ crypto_sha1_update(desc, (const u8 *)&bits, sizeof(bits));
/* Store state in digest */
for (i = 0; i < 5; i++)
@@ -121,7 +122,7 @@
static struct shash_alg alg = {
.digestsize = SHA1_DIGEST_SIZE,
.init = sha1_init,
- .update = sha1_update,
+ .update = crypto_sha1_update,
.final = sha1_final,
.export = sha1_export,
.import = sha1_import,
diff --git a/crypto/shash.c b/crypto/shash.c
index 76f74b9..ea8a9c6 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -17,6 +17,8 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
+#include <linux/cryptouser.h>
+#include <net/netlink.h>
#include "internal.h"
@@ -522,6 +524,24 @@
return alg->cra_ctxsize;
}
+static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ struct crypto_report_hash rhash;
+ struct shash_alg *salg = __crypto_shash_alg(alg);
+
+ snprintf(rhash.type, CRYPTO_MAX_ALG_NAME, "%s", "shash");
+ rhash.blocksize = alg->cra_blocksize;
+ rhash.digestsize = salg->digestsize;
+
+ NLA_PUT(skb, CRYPTOCFGA_REPORT_HASH,
+ sizeof(struct crypto_report_hash), &rhash);
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static void crypto_shash_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_shash_show(struct seq_file *m, struct crypto_alg *alg)
@@ -541,6 +561,7 @@
#ifdef CONFIG_PROC_FS
.show = crypto_shash_show,
#endif
+ .report = crypto_shash_report,
.maskclear = ~CRYPTO_ALG_TYPE_MASK,
.maskset = CRYPTO_ALG_TYPE_MASK,
.type = CRYPTO_ALG_TYPE_SHASH,
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 2222617..0c4e80f 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -782,11 +782,13 @@
case 7:
ret += tcrypt_test("ecb(blowfish)");
ret += tcrypt_test("cbc(blowfish)");
+ ret += tcrypt_test("ctr(blowfish)");
break;
case 8:
ret += tcrypt_test("ecb(twofish)");
ret += tcrypt_test("cbc(twofish)");
+ ret += tcrypt_test("ctr(twofish)");
break;
case 9:
@@ -1039,6 +1041,10 @@
speed_template_16_24_32);
test_cipher_speed("cbc(twofish)", DECRYPT, sec, NULL, 0,
speed_template_16_24_32);
+ test_cipher_speed("ctr(twofish)", ENCRYPT, sec, NULL, 0,
+ speed_template_16_24_32);
+ test_cipher_speed("ctr(twofish)", DECRYPT, sec, NULL, 0,
+ speed_template_16_24_32);
break;
case 203:
@@ -1050,6 +1056,10 @@
speed_template_8_32);
test_cipher_speed("cbc(blowfish)", DECRYPT, sec, NULL, 0,
speed_template_8_32);
+ test_cipher_speed("ctr(blowfish)", ENCRYPT, sec, NULL, 0,
+ speed_template_8_32);
+ test_cipher_speed("ctr(blowfish)", DECRYPT, sec, NULL, 0,
+ speed_template_8_32);
break;
case 204:
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index b6b93d4..e91c1eb 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -1756,6 +1756,36 @@
}
}
}, {
+ .alg = "ctr(blowfish)",
+ .test = alg_test_skcipher,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = bf_ctr_enc_tv_template,
+ .count = BF_CTR_ENC_TEST_VECTORS
+ },
+ .dec = {
+ .vecs = bf_ctr_dec_tv_template,
+ .count = BF_CTR_DEC_TEST_VECTORS
+ }
+ }
+ }
+ }, {
+ .alg = "ctr(twofish)",
+ .test = alg_test_skcipher,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = tf_ctr_enc_tv_template,
+ .count = TF_CTR_ENC_TEST_VECTORS
+ },
+ .dec = {
+ .vecs = tf_ctr_dec_tv_template,
+ .count = TF_CTR_DEC_TEST_VECTORS
+ }
+ }
+ }
+ }, {
.alg = "cts(cbc(aes))",
.test = alg_test_skcipher,
.suite = {
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index 27adc92..37b4d8f 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -2391,10 +2391,12 @@
/*
* Blowfish test vectors.
*/
-#define BF_ENC_TEST_VECTORS 6
-#define BF_DEC_TEST_VECTORS 6
-#define BF_CBC_ENC_TEST_VECTORS 1
-#define BF_CBC_DEC_TEST_VECTORS 1
+#define BF_ENC_TEST_VECTORS 7
+#define BF_DEC_TEST_VECTORS 7
+#define BF_CBC_ENC_TEST_VECTORS 2
+#define BF_CBC_DEC_TEST_VECTORS 2
+#define BF_CTR_ENC_TEST_VECTORS 2
+#define BF_CTR_DEC_TEST_VECTORS 2
static struct cipher_testvec bf_enc_tv_template[] = {
{ /* DES test vectors from OpenSSL */
@@ -2448,6 +2450,24 @@
.ilen = 8,
.result = "\xc0\x45\x04\x01\x2e\x4e\x1f\x53",
.rlen = 8,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9",
+ .ilen = 40,
+ .result = "\x96\x87\x3D\x0C\x7B\xFB\xBD\x1F"
+ "\xE3\xC1\x99\x6D\x39\xD4\xC2\x7D"
+ "\xD7\x87\xA1\xF2\xDF\x51\x71\x26"
+ "\xC2\xF4\x6D\xFF\xF6\xCD\x6B\x40"
+ "\xE1\xB3\xBF\xD4\x38\x2B\xC8\x3B",
+ .rlen = 40,
},
};
@@ -2503,6 +2523,24 @@
.ilen = 8,
.result = "\xfe\xdc\xba\x98\x76\x54\x32\x10",
.rlen = 8,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .input = "\x96\x87\x3D\x0C\x7B\xFB\xBD\x1F"
+ "\xE3\xC1\x99\x6D\x39\xD4\xC2\x7D"
+ "\xD7\x87\xA1\xF2\xDF\x51\x71\x26"
+ "\xC2\xF4\x6D\xFF\xF6\xCD\x6B\x40"
+ "\xE1\xB3\xBF\xD4\x38\x2B\xC8\x3B",
+ .ilen = 40,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9",
+ .rlen = 40,
},
};
@@ -2522,6 +2560,25 @@
"\x58\xde\xb9\xe7\x15\x46\x16\xd9"
"\x59\xf1\x65\x2b\xd5\xff\x92\xcc",
.rlen = 32,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F",
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9",
+ .ilen = 40,
+ .result = "\xB4\xFE\xA5\xBB\x3D\x2C\x27\x06"
+ "\x06\x2B\x3A\x92\xB2\xF5\x5E\x62"
+ "\x84\xCD\xF7\x66\x7E\x41\x6C\x8E"
+ "\x1B\xD9\x02\xB6\x48\xB0\x87\x25"
+ "\x01\x9C\x93\x63\x51\x60\x82\xD2",
+ .rlen = 40,
},
};
@@ -2541,16 +2598,125 @@
"\x68\x65\x20\x74\x69\x6d\x65\x20"
"\x66\x6f\x72\x20\x00\x00\x00\x00",
.rlen = 32,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F",
+ .input = "\xB4\xFE\xA5\xBB\x3D\x2C\x27\x06"
+ "\x06\x2B\x3A\x92\xB2\xF5\x5E\x62"
+ "\x84\xCD\xF7\x66\x7E\x41\x6C\x8E"
+ "\x1B\xD9\x02\xB6\x48\xB0\x87\x25"
+ "\x01\x9C\x93\x63\x51\x60\x82\xD2",
+ .ilen = 40,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9",
+ .rlen = 40,
+ },
+};
+
+static struct cipher_testvec bf_ctr_enc_tv_template[] = {
+ { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F",
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9",
+ .ilen = 40,
+ .result = "\xC7\xA3\xDF\xB9\x05\xF4\x9E\x8D"
+ "\x9E\xDF\x38\x18\x83\x07\xEF\xC1"
+ "\x93\x3C\xAA\xAA\xFE\x06\x42\xCC"
+ "\x0D\x70\x86\x5A\x44\xAD\x85\x17"
+ "\xE4\x1F\x5E\xA5\x89\xAC\x32\xBC",
+ .rlen = 40,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F",
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B",
+ .ilen = 43,
+ .result = "\xC7\xA3\xDF\xB9\x05\xF4\x9E\x8D"
+ "\x9E\xDF\x38\x18\x83\x07\xEF\xC1"
+ "\x93\x3C\xAA\xAA\xFE\x06\x42\xCC"
+ "\x0D\x70\x86\x5A\x44\xAD\x85\x17"
+ "\xE4\x1F\x5E\xA5\x89\xAC\x32\xBC"
+ "\x3D\xA7\xE9",
+ .rlen = 43,
+ },
+};
+
+static struct cipher_testvec bf_ctr_dec_tv_template[] = {
+ { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F",
+ .input = "\xC7\xA3\xDF\xB9\x05\xF4\x9E\x8D"
+ "\x9E\xDF\x38\x18\x83\x07\xEF\xC1"
+ "\x93\x3C\xAA\xAA\xFE\x06\x42\xCC"
+ "\x0D\x70\x86\x5A\x44\xAD\x85\x17"
+ "\xE4\x1F\x5E\xA5\x89\xAC\x32\xBC",
+ .ilen = 40,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9",
+ .rlen = 40,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F",
+ .input = "\xC7\xA3\xDF\xB9\x05\xF4\x9E\x8D"
+ "\x9E\xDF\x38\x18\x83\x07\xEF\xC1"
+ "\x93\x3C\xAA\xAA\xFE\x06\x42\xCC"
+ "\x0D\x70\x86\x5A\x44\xAD\x85\x17"
+ "\xE4\x1F\x5E\xA5\x89\xAC\x32\xBC"
+ "\x3D\xA7\xE9",
+ .ilen = 43,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B",
+ .rlen = 43,
},
};
/*
* Twofish test vectors.
*/
-#define TF_ENC_TEST_VECTORS 3
-#define TF_DEC_TEST_VECTORS 3
-#define TF_CBC_ENC_TEST_VECTORS 4
-#define TF_CBC_DEC_TEST_VECTORS 4
+#define TF_ENC_TEST_VECTORS 4
+#define TF_DEC_TEST_VECTORS 4
+#define TF_CBC_ENC_TEST_VECTORS 5
+#define TF_CBC_DEC_TEST_VECTORS 5
+#define TF_CTR_ENC_TEST_VECTORS 2
+#define TF_CTR_DEC_TEST_VECTORS 2
static struct cipher_testvec tf_enc_tv_template[] = {
{
@@ -2582,6 +2748,30 @@
.result = "\x37\x52\x7b\xe0\x05\x23\x34\xb8"
"\x9f\x0c\xfc\xca\xe8\x7c\xfa\x20",
.rlen = 16,
+ }, { /* Generated with Crypto++ */
+ .key = "\x3F\x85\x62\x3F\x1C\xF9\xD6\x1C"
+ "\xF9\xD6\xB3\x90\x6D\x4A\x90\x6D"
+ "\x4A\x27\x04\xE1\x27\x04\xE1\xBE"
+ "\x9B\x78\xBE\x9B\x78\x55\x32\x0F",
+ .klen = 32,
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C",
+ .ilen = 64,
+ .result = "\x88\xCB\x1E\xC2\xAF\x8A\x97\xFF"
+ "\xF6\x90\x46\x9C\x4A\x0F\x08\xDC"
+ "\xDE\xAB\xAD\xFA\xFC\xA8\xC2\x3D"
+ "\xE0\xE4\x8B\x3F\xD5\xA3\xF7\x14"
+ "\x34\x9E\xB6\x08\xB2\xDD\xA8\xF5"
+ "\xDF\xFA\xC7\xE8\x09\x50\x76\x08"
+ "\xA2\xB6\x6A\x59\xC0\x2B\x6D\x05"
+ "\x89\xF6\x82\xF0\xD3\xDB\x06\x02",
+ .rlen = 64,
},
};
@@ -2615,6 +2805,30 @@
.ilen = 16,
.result = zeroed_string,
.rlen = 16,
+ }, { /* Generated with Crypto++ */
+ .key = "\x3F\x85\x62\x3F\x1C\xF9\xD6\x1C"
+ "\xF9\xD6\xB3\x90\x6D\x4A\x90\x6D"
+ "\x4A\x27\x04\xE1\x27\x04\xE1\xBE"
+ "\x9B\x78\xBE\x9B\x78\x55\x32\x0F",
+ .klen = 32,
+ .input = "\x88\xCB\x1E\xC2\xAF\x8A\x97\xFF"
+ "\xF6\x90\x46\x9C\x4A\x0F\x08\xDC"
+ "\xDE\xAB\xAD\xFA\xFC\xA8\xC2\x3D"
+ "\xE0\xE4\x8B\x3F\xD5\xA3\xF7\x14"
+ "\x34\x9E\xB6\x08\xB2\xDD\xA8\xF5"
+ "\xDF\xFA\xC7\xE8\x09\x50\x76\x08"
+ "\xA2\xB6\x6A\x59\xC0\x2B\x6D\x05"
+ "\x89\xF6\x82\xF0\xD3\xDB\x06\x02",
+ .ilen = 64,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C",
+ .rlen = 64,
},
};
@@ -2661,6 +2875,32 @@
"\x05\xef\x8c\x61\xa8\x11\x58\x26"
"\x34\xba\x5c\xb7\x10\x6a\xa6\x41",
.rlen = 48,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F"
+ "\xC4\x29\x8E\xF3\x35\x9A\xFF\x64",
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C",
+ .ilen = 64,
+ .result = "\xC8\xFF\xF2\x53\xA6\x27\x09\xD1"
+ "\x33\x38\xC2\xC0\x0C\x14\x7E\xB5"
+ "\x26\x1B\x05\x0C\x05\x12\x3F\xC0"
+ "\xF9\x1C\x02\x28\x40\x96\x6F\xD0"
+ "\x3D\x32\xDF\xDA\x56\x00\x6E\xEE"
+ "\x5B\x2A\x72\x9D\xC2\x4D\x19\xBC"
+ "\x8C\x53\xFA\x87\x6F\xDD\x81\xA3"
+ "\xB1\xD3\x44\x65\xDF\xE7\x63\x38",
+ .rlen = 64,
},
};
@@ -2707,6 +2947,148 @@
.ilen = 48,
.result = zeroed_string,
.rlen = 48,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F"
+ "\xC4\x29\x8E\xF3\x35\x9A\xFF\x64",
+ .input = "\xC8\xFF\xF2\x53\xA6\x27\x09\xD1"
+ "\x33\x38\xC2\xC0\x0C\x14\x7E\xB5"
+ "\x26\x1B\x05\x0C\x05\x12\x3F\xC0"
+ "\xF9\x1C\x02\x28\x40\x96\x6F\xD0"
+ "\x3D\x32\xDF\xDA\x56\x00\x6E\xEE"
+ "\x5B\x2A\x72\x9D\xC2\x4D\x19\xBC"
+ "\x8C\x53\xFA\x87\x6F\xDD\x81\xA3"
+ "\xB1\xD3\x44\x65\xDF\xE7\x63\x38",
+ .ilen = 64,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C",
+ .rlen = 64,
+ },
+};
+
+static struct cipher_testvec tf_ctr_enc_tv_template[] = {
+ { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F"
+ "\xC4\x29\x8E\xF3\x35\x9A\xFF\x64",
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C",
+ .ilen = 64,
+ .result = "\xDF\xDD\x69\xFA\xB0\x2E\xFD\xFE"
+ "\x70\x9E\xC5\x4B\xC9\xD4\xA1\x30"
+ "\x26\x9B\x89\xA1\xEE\x43\xE0\x52"
+ "\x55\x17\x4E\xC7\x0E\x33\x1F\xF1"
+ "\x9F\x8D\x40\x9F\x24\xFD\x92\xA0"
+ "\xBC\x8F\x35\xDD\x67\x38\xD8\xAA"
+ "\xCF\xF8\x48\xCA\xFB\xE4\x5C\x60"
+ "\x01\x41\x21\x12\x38\xAB\x52\x4F",
+ .rlen = 64,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F"
+ "\xC4\x29\x8E\xF3\x35\x9A\xFF\x64",
+ .input = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C"
+ "\xC3\x37\xCE",
+ .ilen = 67,
+ .result = "\xDF\xDD\x69\xFA\xB0\x2E\xFD\xFE"
+ "\x70\x9E\xC5\x4B\xC9\xD4\xA1\x30"
+ "\x26\x9B\x89\xA1\xEE\x43\xE0\x52"
+ "\x55\x17\x4E\xC7\x0E\x33\x1F\xF1"
+ "\x9F\x8D\x40\x9F\x24\xFD\x92\xA0"
+ "\xBC\x8F\x35\xDD\x67\x38\xD8\xAA"
+ "\xCF\xF8\x48\xCA\xFB\xE4\x5C\x60"
+ "\x01\x41\x21\x12\x38\xAB\x52\x4F"
+ "\xA8\x57\x20",
+ .rlen = 67,
+ },
+};
+
+static struct cipher_testvec tf_ctr_dec_tv_template[] = {
+ { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F"
+ "\xC4\x29\x8E\xF3\x35\x9A\xFF\x64",
+ .input = "\xDF\xDD\x69\xFA\xB0\x2E\xFD\xFE"
+ "\x70\x9E\xC5\x4B\xC9\xD4\xA1\x30"
+ "\x26\x9B\x89\xA1\xEE\x43\xE0\x52"
+ "\x55\x17\x4E\xC7\x0E\x33\x1F\xF1"
+ "\x9F\x8D\x40\x9F\x24\xFD\x92\xA0"
+ "\xBC\x8F\x35\xDD\x67\x38\xD8\xAA"
+ "\xCF\xF8\x48\xCA\xFB\xE4\x5C\x60"
+ "\x01\x41\x21\x12\x38\xAB\x52\x4F",
+ .ilen = 64,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C",
+ .rlen = 64,
+ }, { /* Generated with Crypto++ */
+ .key = "\x85\x62\x3F\x1C\xF9\xD6\x1C\xF9"
+ "\xD6\xB3\x90\x6D\x4A\x90\x6D\x4A"
+ "\x27\x04\xE1\x27\x04\xE1\xBE\x9B"
+ "\x78\xBE\x9B\x78\x55\x32\x0F\x55",
+ .klen = 32,
+ .iv = "\xE2\x24\x89\xEE\x53\xB8\x1D\x5F"
+ "\xC4\x29\x8E\xF3\x35\x9A\xFF\x64",
+ .input = "\xDF\xDD\x69\xFA\xB0\x2E\xFD\xFE"
+ "\x70\x9E\xC5\x4B\xC9\xD4\xA1\x30"
+ "\x26\x9B\x89\xA1\xEE\x43\xE0\x52"
+ "\x55\x17\x4E\xC7\x0E\x33\x1F\xF1"
+ "\x9F\x8D\x40\x9F\x24\xFD\x92\xA0"
+ "\xBC\x8F\x35\xDD\x67\x38\xD8\xAA"
+ "\xCF\xF8\x48\xCA\xFB\xE4\x5C\x60"
+ "\x01\x41\x21\x12\x38\xAB\x52\x4F"
+ "\xA8\x57\x20",
+ .ilen = 67,
+ .result = "\x56\xED\x84\x1B\x8F\x26\xBD\x31"
+ "\xC8\x5F\xF6\x6A\x01\x98\x0C\xA3"
+ "\x3A\xD1\x45\xDC\x73\x0A\x7E\x15"
+ "\xAC\x20\xB7\x4E\xE5\x59\xF0\x87"
+ "\x1E\x92\x29\xC0\x34\xCB\x62\xF9"
+ "\x6D\x04\x9B\x0F\xA6\x3D\xD4\x48"
+ "\xDF\x76\x0D\x81\x18\xAF\x23\xBA"
+ "\x51\xE8\x5C\xF3\x8A\x21\x95\x2C"
+ "\xC3\x37\xCE",
+ .rlen = 67,
},
};
diff --git a/crypto/wp512.c b/crypto/wp512.c
index 7234272..71719a2 100644
--- a/crypto/wp512.c
+++ b/crypto/wp512.c
@@ -762,11 +762,17 @@
0x86228644a411c286ULL,
};
-static const u64 rc[WHIRLPOOL_ROUNDS + 1] = {
- 0x0000000000000000ULL, 0x1823c6e887b8014fULL, 0x36a6d2f5796f9152ULL,
- 0x60bc9b8ea30c7b35ULL, 0x1de0d7c22e4bfe57ULL, 0x157737e59ff04adaULL,
- 0x58c9290ab1a06b85ULL, 0xbd5d10f4cb3e0567ULL, 0xe427418ba77d95d8ULL,
- 0xfbee7c66dd17479eULL, 0xca2dbf07ad5a8333ULL,
+static const u64 rc[WHIRLPOOL_ROUNDS] = {
+ 0x1823c6e887b8014fULL,
+ 0x36a6d2f5796f9152ULL,
+ 0x60bc9b8ea30c7b35ULL,
+ 0x1de0d7c22e4bfe57ULL,
+ 0x157737e59ff04adaULL,
+ 0x58c9290ab1a06b85ULL,
+ 0xbd5d10f4cb3e0567ULL,
+ 0xe427418ba77d95d8ULL,
+ 0xfbee7c66dd17479eULL,
+ 0xca2dbf07ad5a8333ULL,
};
/**
@@ -793,7 +799,7 @@
state[6] = block[6] ^ (K[6] = wctx->hash[6]);
state[7] = block[7] ^ (K[7] = wctx->hash[7]);
- for (r = 1; r <= WHIRLPOOL_ROUNDS; r++) {
+ for (r = 0; r < WHIRLPOOL_ROUNDS; r++) {
L[0] = C0[(int)(K[0] >> 56) ] ^
C1[(int)(K[7] >> 48) & 0xff] ^
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 2ca59dc..1274080 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -933,7 +933,7 @@
static int erst_close_pstore(struct pstore_info *psi);
static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
struct timespec *time, struct pstore_info *psi);
-static u64 erst_writer(enum pstore_type_id type, unsigned int part,
+static int erst_writer(enum pstore_type_id type, u64 *id, unsigned int part,
size_t size, struct pstore_info *psi);
static int erst_clearer(enum pstore_type_id type, u64 id,
struct pstore_info *psi);
@@ -1040,11 +1040,12 @@
return (rc < 0) ? rc : (len - sizeof(*rcd));
}
-static u64 erst_writer(enum pstore_type_id type, unsigned int part,
+static int erst_writer(enum pstore_type_id type, u64 *id, unsigned int part,
size_t size, struct pstore_info *psi)
{
struct cper_pstore_record *rcd = (struct cper_pstore_record *)
(erst_info.buf - sizeof(*rcd));
+ int ret;
memset(rcd, 0, sizeof(*rcd));
memcpy(rcd->hdr.signature, CPER_SIG_RECORD, CPER_SIG_SIZE);
@@ -1079,9 +1080,10 @@
}
rcd->sec_hdr.section_severity = CPER_SEV_FATAL;
- erst_write(&rcd->hdr);
+ ret = erst_write(&rcd->hdr);
+ *id = rcd->hdr.record_id;
- return rcd->hdr.record_id;
+ return ret;
}
static int erst_clearer(enum pstore_type_id type, u64 id,
@@ -1165,7 +1167,7 @@
goto err_release_erange;
buf = kmalloc(erst_erange.size, GFP_KERNEL);
- mutex_init(&erst_info.buf_mutex);
+ spin_lock_init(&erst_info.buf_lock);
if (buf) {
erst_info.buf = buf + sizeof(struct cper_pstore_record);
erst_info.bufsize = erst_erange.size -
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index fa32f58..f31c5c5 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -80,7 +80,8 @@
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
static struct workqueue_struct *kacpi_notify_wq;
-static struct workqueue_struct *kacpi_hotplug_wq;
+struct workqueue_struct *kacpi_hotplug_wq;
+EXPORT_SYMBOL(kacpi_hotplug_wq);
struct acpi_res_list {
resource_size_t start;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index d74926e..bd230e8 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -365,6 +365,40 @@
#endif /* !CONFIG_HIBERNATE_CALLBACKS */
+#ifdef CONFIG_PM_RUNTIME
+/*
+ * Hooks to provide runtime PM of the pclk (bus clock). It is safe to
+ * enable/disable the bus clock at runtime PM suspend/resume as this
+ * does not result in loss of context. However, disabling vcore power
+ * would do, so we leave that to the driver.
+ */
+static int amba_pm_runtime_suspend(struct device *dev)
+{
+ struct amba_device *pcdev = to_amba_device(dev);
+ int ret = pm_generic_runtime_suspend(dev);
+
+ if (ret == 0 && dev->driver)
+ clk_disable(pcdev->pclk);
+
+ return ret;
+}
+
+static int amba_pm_runtime_resume(struct device *dev)
+{
+ struct amba_device *pcdev = to_amba_device(dev);
+ int ret;
+
+ if (dev->driver) {
+ ret = clk_enable(pcdev->pclk);
+ /* Failure is probably fatal to the system, but... */
+ if (ret)
+ return ret;
+ }
+
+ return pm_generic_runtime_resume(dev);
+}
+#endif
+
#ifdef CONFIG_PM
static const struct dev_pm_ops amba_pm = {
@@ -383,8 +417,8 @@
.poweroff_noirq = amba_pm_poweroff_noirq,
.restore_noirq = amba_pm_restore_noirq,
SET_RUNTIME_PM_OPS(
- pm_generic_runtime_suspend,
- pm_generic_runtime_resume,
+ amba_pm_runtime_suspend,
+ amba_pm_runtime_resume,
pm_generic_runtime_idle
)
};
@@ -426,9 +460,17 @@
if (IS_ERR(pclk))
return PTR_ERR(pclk);
- ret = clk_enable(pclk);
- if (ret)
+ ret = clk_prepare(pclk);
+ if (ret) {
clk_put(pclk);
+ return ret;
+ }
+
+ ret = clk_enable(pclk);
+ if (ret) {
+ clk_unprepare(pclk);
+ clk_put(pclk);
+ }
return ret;
}
@@ -438,6 +480,7 @@
struct clk *pclk = pcdev->pclk;
clk_disable(pclk);
+ clk_unprepare(pclk);
clk_put(pclk);
}
@@ -494,10 +537,18 @@
if (ret)
break;
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
ret = pcdrv->probe(pcdev, id);
if (ret == 0)
break;
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
+
amba_put_disable_pclk(pcdev);
amba_put_disable_vcore(pcdev);
} while (0);
@@ -509,7 +560,16 @@
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *drv = to_amba_driver(dev->driver);
- int ret = drv->remove(pcdev);
+ int ret;
+
+ pm_runtime_get_sync(dev);
+ ret = drv->remove(pcdev);
+ pm_runtime_put_noidle(dev);
+
+ /* Undo the runtime PM settings in amba_probe() */
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
amba_put_disable_pclk(pcdev);
amba_put_disable_vcore(pcdev);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5987e0b..6bdedd7 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -820,7 +820,7 @@
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
- depends on PATA_PLATFORM && PPC_OF
+ depends on PATA_PLATFORM && OF
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems with OpenFirmware
@@ -831,6 +831,7 @@
config PATA_QDI
tristate "QDI VLB PATA support"
depends on ISA
+ select PATA_LEGACY
help
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 9550d69..6ece5b7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -88,7 +88,6 @@
obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
-obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 6fef1fa..c03277d 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,41 @@
#include <linux/ahci_platform.h>
#include "ahci.h"
+enum ahci_type {
+ AHCI, /* standard platform ahci */
+ IMX53_AHCI, /* ahci on i.mx53 */
+};
+
+static struct platform_device_id ahci_devtype[] = {
+ {
+ .name = "ahci",
+ .driver_data = AHCI,
+ }, {
+ .name = "imx53-ahci",
+ .driver_data = IMX53_AHCI,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, ahci_devtype);
+
+
+static const struct ata_port_info ahci_port_info[] = {
+ /* by features */
+ [AHCI] = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [IMX53_AHCI] = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_pmp_retry_srst_ops,
+ },
+};
+
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT("ahci_platform"),
};
@@ -31,12 +66,8 @@
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev->platform_data;
- struct ata_port_info pi = {
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- };
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ struct ata_port_info pi = ahci_port_info[id->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
struct ata_host *host;
@@ -177,6 +208,7 @@
.name = "ahci",
.owner = THIS_MODULE,
},
+ .id_table = ahci_devtype,
};
static int __init ahci_init(void)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 43107e9..69ac373c7 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -113,6 +113,8 @@
PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
+ PIIX_FLAG_PIO16 = (1 << 30), /*support 16bit PIO only*/
+
PIIX_80C_PRI = (1 << 5) | (1 << 4),
PIIX_80C_SEC = (1 << 7) | (1 << 6),
@@ -147,6 +149,7 @@
ich8m_apple_sata, /* locks up on second port enable */
tolapai_sata,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
+ ich8_sata_snb,
};
struct piix_map_db {
@@ -177,6 +180,7 @@
static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
unsigned hints);
static bool piix_irq_check(struct ata_port *ap);
+static int piix_port_start(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -298,21 +302,21 @@
/* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (CPT) */
- { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (CPT) */
- { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (CPT) */
{ 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (CPT) */
{ 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (PBG) */
- { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (PBG) */
{ 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
- { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (Panther Point) */
- { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (Panther Point) */
{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
@@ -338,6 +342,7 @@
static struct ata_port_operations piix_sata_ops = {
.inherits = &ata_bmdma32_port_ops,
.sff_irq_check = piix_irq_check,
+ .port_start = piix_port_start,
};
static struct ata_port_operations piix_pata_ops = {
@@ -478,6 +483,7 @@
[ich8_2port_sata] = &ich8_2port_map_db,
[ich8m_apple_sata] = &ich8m_apple_map_db,
[tolapai_sata] = &tolapai_map_db,
+ [ich8_sata_snb] = &ich8_map_db,
};
static struct ata_port_info piix_port_info[] = {
@@ -606,6 +612,19 @@
.port_ops = &piix_vmw_ops,
},
+ /*
+ * some Sandybridge chipsets have broken 32 mode up to now,
+ * see https://bugzilla.kernel.org/show_bug.cgi?id=40592
+ */
+ [ich8_sata_snb] =
+ {
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
+ },
+
};
static struct pci_bits piix_enable_bits[] = {
@@ -649,6 +668,14 @@
{ 0, }
};
+static int piix_port_start(struct ata_port *ap)
+{
+ if (!(ap->flags & PIIX_FLAG_PIO16))
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+
+ return ata_bmdma_port_start(ap);
+}
+
/**
* ich_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
@@ -704,22 +731,11 @@
static DEFINE_SPINLOCK(piix_lock);
-/**
- * piix_set_piomode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set PIO mode for device, in host controller PCI config space.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void piix_set_timings(struct ata_port *ap, struct ata_device *adev,
+ u8 pio)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned long flags;
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
@@ -744,10 +760,16 @@
control |= 1; /* TIME1 enable */
if (ata_pio_need_iordy(adev))
control |= 2; /* IE enable */
-
/* Intel specifies that the PPE functionality is for disk only */
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ /*
+ * If the drive MWDMA is faster than it can do PIO then
+ * we must force PIO into PIO0
+ */
+ if (adev->pio_mode < XFER_PIO_0 + pio)
+ /* Enable DMA timing only */
+ control |= 8; /* PIO cycles in PIO0 */
spin_lock_irqsave(&piix_lock, flags);
@@ -759,8 +781,6 @@
if (is_slave) {
/* clear TIME1|IE1|PPE1|DTE1 */
master_data &= 0xff0f;
- /* Enable SITRE (separate slave timing register) */
- master_data |= 0x4000;
/* enable PPE1, IE1 and TIME1 as needed */
master_data |= (control << 4);
pci_read_config_byte(dev, slave_port, &slave_data);
@@ -778,6 +798,9 @@
(timings[pio][0] << 12) |
(timings[pio][1] << 8);
}
+
+ /* Enable SITRE (separate slave timing register) */
+ master_data |= 0x4000;
pci_write_config_word(dev, master_port, master_data);
if (is_slave)
pci_write_config_byte(dev, slave_port, slave_data);
@@ -795,6 +818,22 @@
}
/**
+ * piix_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Drive in question
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ piix_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
+/**
* do_pata_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: Drive in question
@@ -810,31 +849,20 @@
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned long flags;
- u8 master_port = ap->port_no ? 0x42 : 0x40;
- u16 master_data;
u8 speed = adev->dma_mode;
int devid = adev->devno + 2 * ap->port_no;
u8 udma_enable = 0;
- static const /* ISP RTC */
- u8 timings[][2] = { { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- spin_lock_irqsave(&piix_lock, flags);
-
- pci_read_config_word(dev, master_port, &master_data);
- if (ap->udma_mask)
- pci_read_config_byte(dev, 0x48, &udma_enable);
-
if (speed >= XFER_UDMA_0) {
- unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+ unsigned int udma = speed - XFER_UDMA_0;
u16 udma_timing;
u16 ideconf;
int u_clock, u_speed;
+ spin_lock_irqsave(&piix_lock, flags);
+
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+
/*
* UDMA is handled by a combination of clock switching and
* selection of dividers
@@ -867,56 +895,21 @@
performance (WR_PingPong_En) */
pci_write_config_word(dev, 0x54, ideconf);
}
+
+ pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&piix_lock, flags);
} else {
- /*
- * MWDMA is driven by the PIO timings. We must also enable
- * IORDY unconditionally along with TIME1. PPE has already
- * been set when the PIO timing was set.
- */
- unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
- unsigned int control;
- u8 slave_data;
+ /* MWDMA is driven by the PIO timings. */
+ unsigned int mwdma = speed - XFER_MW_DMA_0;
const unsigned int needed_pio[3] = {
XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
};
int pio = needed_pio[mwdma] - XFER_PIO_0;
- control = 3; /* IORDY|TIME1 */
-
- /* If the drive MWDMA is faster than it can do PIO then
- we must force PIO into PIO0 */
-
- if (adev->pio_mode < needed_pio[mwdma])
- /* Enable DMA timing only */
- control |= 8; /* PIO cycles in PIO0 */
-
- if (adev->devno) { /* Slave */
- master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
- master_data |= control << 4;
- pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (ap->port_no ? 0x0f : 0xf0);
- /* Load the matching timing */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
- pci_write_config_byte(dev, 0x44, slave_data);
- } else { /* Master */
- master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
- and master timing bits */
- master_data |= control;
- master_data |=
- (timings[pio][0] << 12) |
- (timings[pio][1] << 8);
- }
-
- if (ap->udma_mask)
- udma_enable &= ~(1 << devid);
-
- pci_write_config_word(dev, master_port, master_data);
+ /* XFER_PIO_0 is never used currently */
+ piix_set_timings(ap, adev, pio);
}
- /* Don't scribble on 0x48 if the controller does not support UDMA */
- if (ap->udma_mask)
- pci_write_config_byte(dev, 0x48, udma_enable);
-
- spin_unlock_irqrestore(&piix_lock, flags);
}
/**
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4a3a5ae..c04ad68 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2938,7 +2938,7 @@
if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
- if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+ if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
if (speed <= XFER_PIO_2)
p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
else if ((speed <= XFER_PIO_4) ||
@@ -6713,6 +6713,7 @@
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
+EXPORT_SYMBOL_GPL(__ata_change_queue_depth);
EXPORT_SYMBOL_GPL(sata_scr_valid);
EXPORT_SYMBOL_GPL(sata_scr_read);
EXPORT_SYMBOL_GPL(sata_scr_write);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ed16fbe..c021186 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2532,8 +2532,7 @@
return reset(link, classes, deadline);
}
-static int ata_eh_followup_srst_needed(struct ata_link *link,
- int rc, const unsigned int *classes)
+static int ata_eh_followup_srst_needed(struct ata_link *link, int rc)
{
if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
return 0;
@@ -2726,7 +2725,7 @@
/* perform follow-up SRST if necessary */
if (reset == hardreset &&
- ata_eh_followup_srst_needed(link, rc, classes)) {
+ ata_eh_followup_srst_needed(link, rc)) {
reset = softreset;
if (!reset) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 46d087f..19ba770 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1215,25 +1215,15 @@
}
/**
- * ata_scsi_change_queue_depth - SCSI callback for queue depth config
- * @sdev: SCSI device to configure queue depth for
- * @queue_depth: new queue depth
- * @reason: calling context
+ * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth
*
- * This is libata standard hostt->change_queue_depth callback.
- * SCSI will call into this callback when user tries to set queue
- * depth via sysfs.
+ * libsas and libata have different approaches for associating a sdev to
+ * its ata_port.
*
- * LOCKING:
- * SCSI layer (we don't care)
- *
- * RETURNS:
- * Newly configured queue depth.
*/
-int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth,
- int reason)
+int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+ int queue_depth, int reason)
{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
unsigned long flags;
@@ -1269,6 +1259,30 @@
}
/**
+ * ata_scsi_change_queue_depth - SCSI callback for queue depth config
+ * @sdev: SCSI device to configure queue depth for
+ * @queue_depth: new queue depth
+ * @reason: calling context
+ *
+ * This is libata standard hostt->change_queue_depth callback.
+ * SCSI will call into this callback when user tries to set queue
+ * depth via sysfs.
+ *
+ * LOCKING:
+ * SCSI layer (we don't care)
+ *
+ * RETURNS:
+ * Newly configured queue depth.
+ */
+int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth,
+ int reason)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+
+ return __ata_change_queue_depth(ap, sdev, queue_depth, reason);
+}
+
+/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
*
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c24127d..239bfa6 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -569,7 +569,7 @@
/* Transfer trailing byte, if any. */
if (unlikely(buflen & 0x01)) {
- unsigned char pad[2];
+ unsigned char pad[2] = { };
/* Point buf to the tail of buffer */
buf += buflen - 1;
@@ -628,7 +628,7 @@
/* Transfer trailing bytes, if any */
if (unlikely(slop)) {
- unsigned char pad[4];
+ unsigned char pad[4] = { };
/* Point buf to the tail of buffer */
buf += buflen - slop;
@@ -678,7 +678,7 @@
unsigned int consumed;
local_irq_save(flags);
- consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+ consumed = ata_sff_data_xfer32(dev, buf, buflen, rw);
local_irq_restore(flags);
return consumed;
@@ -2507,6 +2507,56 @@
return NULL;
}
+static int ata_pci_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const *ppi,
+ struct scsi_host_template *sht, void *host_priv,
+ int hflags, bool bmdma)
+{
+ struct device *dev = &pdev->dev;
+ const struct ata_port_info *pi;
+ struct ata_host *host = NULL;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ pi = ata_sff_find_valid_pi(ppi);
+ if (!pi) {
+ dev_err(&pdev->dev, "no valid port_info specified\n");
+ return -EINVAL;
+ }
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ goto out;
+
+ if (bmdma)
+ /* prepare and activate BMDMA host */
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+ else
+ /* prepare and activate SFF host */
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ goto out;
+ host->private_data = host_priv;
+ host->flags |= hflags;
+
+ if (bmdma) {
+ pci_set_master(pdev);
+ rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ } else
+ rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
+out:
+ if (rc == 0)
+ devres_remove_group(&pdev->dev, NULL);
+ else
+ devres_release_group(&pdev->dev, NULL);
+
+ return rc;
+}
+
/**
* ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
* @pdev: Controller to be initialized
@@ -2533,41 +2583,7 @@
const struct ata_port_info * const *ppi,
struct scsi_host_template *sht, void *host_priv, int hflag)
{
- struct device *dev = &pdev->dev;
- const struct ata_port_info *pi;
- struct ata_host *host = NULL;
- int rc;
-
- DPRINTK("ENTER\n");
-
- pi = ata_sff_find_valid_pi(ppi);
- if (!pi) {
- dev_err(&pdev->dev, "no valid port_info specified\n");
- return -EINVAL;
- }
-
- if (!devres_open_group(dev, NULL, GFP_KERNEL))
- return -ENOMEM;
-
- rc = pcim_enable_device(pdev);
- if (rc)
- goto out;
-
- /* prepare and activate SFF host */
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
- if (rc)
- goto out;
- host->private_data = host_priv;
- host->flags |= hflag;
-
- rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
-out:
- if (rc == 0)
- devres_remove_group(&pdev->dev, NULL);
- else
- devres_release_group(&pdev->dev, NULL);
-
- return rc;
+ return ata_pci_init_one(pdev, ppi, sht, host_priv, hflag, 0);
}
EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
@@ -3286,42 +3302,7 @@
struct scsi_host_template *sht, void *host_priv,
int hflags)
{
- struct device *dev = &pdev->dev;
- const struct ata_port_info *pi;
- struct ata_host *host = NULL;
- int rc;
-
- DPRINTK("ENTER\n");
-
- pi = ata_sff_find_valid_pi(ppi);
- if (!pi) {
- dev_err(&pdev->dev, "no valid port_info specified\n");
- return -EINVAL;
- }
-
- if (!devres_open_group(dev, NULL, GFP_KERNEL))
- return -ENOMEM;
-
- rc = pcim_enable_device(pdev);
- if (rc)
- goto out;
-
- /* prepare and activate BMDMA host */
- rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
- if (rc)
- goto out;
- host->private_data = host_priv;
- host->flags |= hflags;
-
- pci_set_master(pdev);
- rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
- out:
- if (rc == 0)
- devres_remove_group(&pdev->dev, NULL);
- else
- devres_release_group(&pdev->dev, NULL);
-
- return rc;
+ return ata_pci_init_one(pdev, ppi, sht, host_priv, hflags, 1);
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index cadd679..61da069 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -56,7 +56,7 @@
},
},
{
- .ident = "Toshiba Satelite S1800-814",
+ .ident = "Toshiba Satellite S1800-814",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 719bb73..e8574bb 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -922,8 +922,7 @@
#ifdef CONFIG_PM
static int arasan_cf_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = dev_get_drvdata(dev);
struct arasan_cf_dev *acdev = host->ports[0]->private_data;
if (acdev->dma_chan) {
@@ -937,8 +936,7 @@
static int arasan_cf_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = dev_get_drvdata(dev);
struct arasan_cf_dev *acdev = host->ports[0]->private_data;
cf_init(acdev);
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 78a93b6..4b8b22e 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -2,7 +2,7 @@
* pata_artop.c - ARTOP ATA controller driver
*
* (C) 2006 Red Hat
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2011 Bartlomiej Zolnierkiewicz
*
* Based in part on drivers/ide/pci/aec62xx.c
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.4.6"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -39,31 +39,15 @@
static int clock = 0;
-static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- const struct pci_bits artop_enable_bits[] = {
- { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
- { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
- };
-
- if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
- return -ENOENT;
-
- return ata_sff_prereset(link, deadline);
-}
-
/**
- * artop6260_pre_reset - check for 40/80 pin
+ * artop62x0_pre_reset - probe begin
* @link: link
* @deadline: deadline jiffies for the operation
*
- * The ARTOP hardware reports the cable detect bits in register 0x49.
* Nothing complicated needed here.
*/
-static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
+static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits artop_enable_bits[] = {
{ 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
@@ -73,7 +57,7 @@
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- /* Odd numbered device ids are the units with enable bits (the -R cards) */
+ /* Odd numbered device ids are the units with enable bits. */
if ((pdev->device & 1) &&
!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
@@ -317,7 +301,7 @@
.cable_detect = ata_cable_40wire,
.set_piomode = artop6210_set_piomode,
.set_dmamode = artop6210_set_dmamode,
- .prereset = artop6210_pre_reset,
+ .prereset = artop62x0_pre_reset,
.qc_defer = artop6210_qc_defer,
};
@@ -326,9 +310,36 @@
.cable_detect = artop6260_cable_detect,
.set_piomode = artop6260_set_piomode,
.set_dmamode = artop6260_set_dmamode,
- .prereset = artop6260_pre_reset,
+ .prereset = artop62x0_pre_reset,
};
+static void atp8xx_fixup(struct pci_dev *pdev)
+{
+ if (pdev->device == 0x0005)
+ /* BIOS may have left us in UDMA, clear it before libata probe */
+ pci_write_config_byte(pdev, 0x54, 0);
+ else if (pdev->device == 0x0008 || pdev->device == 0x0009) {
+ u8 reg;
+
+ /* Mac systems come up with some registers not set as we
+ will need them */
+
+ /* Clear reset & test bits */
+ pci_read_config_byte(pdev, 0x49, ®);
+ pci_write_config_byte(pdev, 0x49, reg & ~0x30);
+
+ /* PCI latency must be > 0x80 for burst mode, tweak it
+ * if required.
+ */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®);
+ if (reg <= 0x80)
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
+
+ /* Enable IRQ output and burst mode */
+ pci_read_config_byte(pdev, 0x4a, ®);
+ pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ }
+}
/**
* artop_init_one - Register ARTOP ATA PCI device with kernel services
@@ -383,42 +394,22 @@
if (rc)
return rc;
- if (id->driver_data == 0) { /* 6210 variant */
+ if (id->driver_data == 0) /* 6210 variant */
ppi[0] = &info_6210;
- /* BIOS may have left us in UDMA, clear it before libata probe */
- pci_write_config_byte(pdev, 0x54, 0);
- }
else if (id->driver_data == 1) /* 6260 */
ppi[0] = &info_626x;
else if (id->driver_data == 2) { /* 6280 or 6280 + fast */
unsigned long io = pci_resource_start(pdev, 4);
- u8 reg;
ppi[0] = &info_628x;
if (inb(io) & 0x10)
ppi[0] = &info_628x_fast;
- /* Mac systems come up with some registers not set as we
- will need them */
-
- /* Clear reset & test bits */
- pci_read_config_byte(pdev, 0x49, ®);
- pci_write_config_byte(pdev, 0x49, reg & ~ 0x30);
-
- /* PCI latency must be > 0x80 for burst mode, tweak it
- * if required.
- */
- pci_read_config_byte(pdev, PCI_LATENCY_TIMER, ®);
- if (reg <= 0x80)
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
-
- /* Enable IRQ output and burst mode */
- pci_read_config_byte(pdev, 0x4a, ®);
- pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
-
}
BUG_ON(ppi[0] == NULL);
+ atp8xx_fixup(pdev);
+
return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
}
@@ -432,11 +423,32 @@
{ } /* terminate list */
};
+#ifdef CONFIG_PM
+static int atp8xx_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp8xx_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_driver artop_pci_driver = {
.name = DRV_NAME,
.id_table = artop_pci_tbl,
.probe = artop_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = atp8xx_reinit_one,
+#endif
};
static int __init artop_init(void)
@@ -452,9 +464,8 @@
module_init(artop_init);
module_exit(artop_exit);
-MODULE_AUTHOR("Alan Cox");
+MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, artop_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 960c7257..a76f24a 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -30,7 +30,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
#define DRV_VERSION "0.3"
@@ -414,10 +414,13 @@
host->private_data = info;
- return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
+ ret = ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_at91_sht);
+ if (!ret)
+ return 0;
+
err_put:
clk_put(info->mck);
return ret;
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 4375561..be1aa14 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -49,6 +49,31 @@
static DEFINE_SPINLOCK(atiixp_lock);
/**
+ * atiixp_prereset - perform reset handling
+ * @link: ATA link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Reset sequence checking enable bits to see which ports are
+ * active.
+ */
+
+static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
+{
+ static const struct pci_bits atiixp_enable_bits[] = {
+ { 0x48, 1, 0x01, 0x00 },
+ { 0x48, 1, 0x08, 0x00 }
+ };
+
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+ return -ENOENT;
+
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
* atiixp_set_pio_timing - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
@@ -221,6 +246,7 @@
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,
+ .prereset = atiixp_prereset,
.cable_detect = atiixp_cable_detect,
.set_piomode = atiixp_set_piomode,
.set_dmamode = atiixp_set_dmamode,
@@ -235,16 +261,7 @@
.udma_mask = ATA_UDMA5,
.port_ops = &atiixp_port_ops
};
- static const struct pci_bits atiixp_enable_bits[] = {
- { 0x48, 1, 0x01, 0x00 },
- { 0x48, 1, 0x08, 0x00 }
- };
const struct ata_port_info *ppi[] = { &info, &info };
- int i;
-
- for (i = 0; i < 2; i++)
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
- ppi[i] = &ata_dummy_port_info;
return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
ATA_HOST_PARALLEL_SCAN);
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 7bafc16..e1fb39a 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -82,7 +82,7 @@
}
/**
- * cmd64x_set_piomode - set PIO and MWDMA timing
+ * cmd64x_set_timing - set PIO and MWDMA timing
* @ap: ATA interface
* @adev: ATA device
* @mode: mode
@@ -288,6 +288,22 @@
.cable_detect = cmd648_cable_detect,
};
+static void cmd64x_fixup(struct pci_dev *pdev)
+{
+ u8 mrdmode;
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+ pci_read_config_byte(pdev, MRDMODE, &mrdmode);
+ mrdmode &= ~0x30; /* IRQ set up */
+ mrdmode |= 0x02; /* Memory read line enable */
+ pci_write_config_byte(pdev, MRDMODE, mrdmode);
+
+ /* PPC specific fixup copied from old driver */
+#ifdef CONFIG_PPC
+ pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
+#endif
+}
+
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info cmd_info[6] = {
@@ -336,7 +352,7 @@
&cmd_info[id->driver_data],
NULL
};
- u8 mrdmode, reg;
+ u8 reg;
int rc;
struct pci_dev *bridge = pdev->bus->self;
/* mobility split bridges don't report enabled ports correctly */
@@ -368,11 +384,7 @@
cntrl_ch0_ok = 0;
}
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
- pci_read_config_byte(pdev, MRDMODE, &mrdmode);
- mrdmode &= ~ 0x30; /* IRQ set up */
- mrdmode |= 0x02; /* Memory read line enable */
- pci_write_config_byte(pdev, MRDMODE, mrdmode);
+ cmd64x_fixup(pdev);
/* check for enabled ports */
pci_read_config_byte(pdev, CNTRL, ®);
@@ -388,13 +400,6 @@
ppi[1] = &ata_dummy_port_info;
}
- /* Force PIO 0 here.. */
-
- /* PPC specific fixup copied from old driver */
-#ifdef CONFIG_PPC
- pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
-
return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
}
@@ -402,21 +407,14 @@
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- u8 mrdmode;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
- pci_read_config_byte(pdev, MRDMODE, &mrdmode);
- mrdmode &= ~ 0x30; /* IRQ set up */
- mrdmode |= 0x02; /* Memory read line enable */
- pci_write_config_byte(pdev, MRDMODE, mrdmode);
-#ifdef CONFIG_PPC
- pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
+ cmd64x_fixup(pdev);
+
ata_host_resume(host);
return 0;
}
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 03a9318..a0b4640 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -38,7 +38,7 @@
#include <linux/libata.h>
#include <asm/msr.h>
-#define DRV_NAME "cs5535"
+#define DRV_NAME "pata_cs5535"
#define DRV_VERSION "0.2.12"
/*
@@ -67,8 +67,6 @@
#define CS5535_CABLE_DETECT 0x48
-#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
-
/**
* cs5535_cable_detect - detect cable type
* @ap: Port to detect on
@@ -188,16 +186,6 @@
};
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
- u32 timings, dummy;
-
- /* Check the BIOS set the initial timing clock. If not set the
- timings for PIO0 */
- rdmsr(ATAC_CH0D0_PIO, timings, dummy);
- if (CS5535_BAD_PIO(timings))
- wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0);
- rdmsr(ATAC_CH0D1_PIO, timings, dummy);
- if (CS5535_BAD_PIO(timings))
- wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
}
@@ -230,7 +218,7 @@
}
MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
-MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530");
+MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cs5535);
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index aca47e4..f0243ed 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -73,7 +73,7 @@
/**
* efar_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
- * @adev: um
+ * @adev: Device to program
*
* Set PIO mode for device, in host controller PCI config space.
*
@@ -85,9 +85,9 @@
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
- unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+ unsigned int master_port = ap->port_no ? 0x42 : 0x40;
unsigned long flags;
- u16 idetm_data;
+ u16 master_data;
u8 udma_enable;
int control = 0;
@@ -113,20 +113,20 @@
spin_lock_irqsave(&efar_lock, flags);
- pci_read_config_word(dev, idetm_port, &idetm_data);
+ pci_read_config_word(dev, master_port, &master_data);
/* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
- idetm_data &= 0xCCF0;
- idetm_data |= control;
- idetm_data |= (timings[pio][0] << 12) |
+ master_data &= 0xCCF0;
+ master_data |= control;
+ master_data |= (timings[pio][0] << 12) |
(timings[pio][1] << 8);
} else {
int shift = 4 * ap->port_no;
u8 slave_data;
- idetm_data &= 0xFF0F;
- idetm_data |= (control << 4);
+ master_data &= 0xFF0F;
+ master_data |= (control << 4);
/* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
@@ -135,8 +135,8 @@
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is set */
- pci_write_config_word(dev, idetm_port, idetm_data);
+ master_data |= 0x4000; /* Ensure SITRE is set */
+ pci_write_config_word(dev, master_port, master_data);
pci_read_config_byte(dev, 0x48, &udma_enable);
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 6c77d68..42cffd3 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -111,6 +111,28 @@
{ 0, 0x01208585 }
};
+/**
+ * hpt36x_find_mode - find the hpt36x timing
+ * @ap: ATA port
+ * @speed: transfer mode
+ *
+ * Return the 32bit register programming information for this channel
+ * that matches the speed provided.
+ */
+
+static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
+{
+ struct hpt_clock *clocks = ap->host->private_data;
+
+ while (clocks->xfer_mode) {
+ if (clocks->xfer_mode == speed)
+ return clocks->timing;
+ clocks++;
+ }
+ BUG();
+ return 0xffffffffU; /* silence compiler warning */
+}
+
static const char * const bad_ata33[] = {
"Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
"Maxtor 90845U3", "Maxtor 90650U2",
@@ -210,10 +232,9 @@
static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
u8 mode)
{
- struct hpt_clock *clocks = ap->host->private_data;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr = 0x40 + 4 * adev->devno;
- u32 mask, reg;
+ u32 mask, reg, t;
/* determine timing mask and find matching clock entry */
if (mode < XFER_MW_DMA_0)
@@ -223,13 +244,7 @@
else
mask = 0x30070000;
- while (clocks->xfer_mode) {
- if (clocks->xfer_mode == mode)
- break;
- clocks++;
- }
- if (!clocks->xfer_mode)
- BUG();
+ t = hpt36x_find_mode(ap, mode);
/*
* Combine new mode bits with old config bits and disable
@@ -237,7 +252,7 @@
* problems handling I/O errors later.
*/
pci_read_config_dword(pdev, addr, ®);
- reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000;
+ reg = ((reg & ~mask) | (t & mask)) & ~0xc0000000;
pci_write_config_dword(pdev, addr, reg);
}
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 998af0e..cf9164d 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -76,8 +76,8 @@
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
- unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
- u16 idetm_data;
+ unsigned int master_port = ap->port_no ? 0x42 : 0x40;
+ u16 master_data;
int control = 0;
/*
@@ -100,19 +100,19 @@
if (adev->class != ATA_DEV_ATA)
control |= 4; /* PPE */
- pci_read_config_word(dev, idetm_port, &idetm_data);
+ pci_read_config_word(dev, master_port, &master_data);
/* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
- idetm_data &= 0xCCF0;
- idetm_data |= control;
- idetm_data |= (timings[pio][0] << 12) |
+ master_data &= 0xCCF0;
+ master_data |= control;
+ master_data |= (timings[pio][0] << 12) |
(timings[pio][1] << 8);
} else {
u8 slave_data;
- idetm_data &= 0xFF0F;
- idetm_data |= (control << 4);
+ master_data &= 0xFF0F;
+ master_data |= (control << 4);
/* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
@@ -121,8 +121,8 @@
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is set */
- pci_write_config_word(dev, idetm_port, idetm_data);
+ master_data |= 0x4000; /* Ensure SITRE is set */
+ pci_write_config_word(dev, master_port, master_data);
}
/**
@@ -163,7 +163,7 @@
/* Clocks follow the PIIX style */
u_speed = min(2 - (udma & 1), udma);
- if (udma == 5)
+ if (udma > 4)
u_clock = 0x1000; /* 100Mhz */
else if (udma > 2)
u_clock = 1; /* 66Mhz */
@@ -262,7 +262,7 @@
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA12_ONLY,
- .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */
+ .udma_mask = ATA_UDMA6,
.port_ops = &it8213_ops,
};
/* Current IT8213 stuff is single port */
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index d960f8e..35aca7d 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -79,15 +79,6 @@
module_param(all, int, 0444);
MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
-struct legacy_data {
- unsigned long timing;
- u8 clock[2];
- u8 last;
- int fast;
- struct platform_device *platform_dev;
-
-};
-
enum controller {
BIOS = 0,
SNOOP = 1,
@@ -104,6 +95,14 @@
UNKNOWN = -1
};
+struct legacy_data {
+ unsigned long timing;
+ u8 clock[2];
+ u8 last;
+ int fast;
+ enum controller type;
+ struct platform_device *platform_dev;
+};
struct legacy_probe {
unsigned char *name;
@@ -137,11 +136,17 @@
static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
-static int qdi; /* Set to probe QDI controllers */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
+/* Set to probe QDI controllers */
+#ifdef CONFIG_PATA_QDI_MODULE
+static int qdi = 1;
+#else
+static int qdi;
+#endif
+
#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
static int winbond = 1; /* Set to probe Winbond controllers,
give I/O port if non standard */
@@ -631,77 +636,20 @@
.qc_issue = opti82c46x_qc_issue,
};
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct legacy_data *ld_qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (ld_qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- ld_qdi->clock[adev->devno] = timing;
-
- outb(timing, ld_qdi->timing);
-}
-
/**
- * qdi6580dp_set_piomode - PIO setup for dual channel
- * @ap: Port
- * @adev: Device
- *
- * In dual channel mode the 6580 has one clock per channel and we have
- * to software clockswitch in qc_issue.
- */
-
-static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct legacy_data *ld_qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (ld_qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- ld_qdi->clock[adev->devno] = timing;
-
- outb(timing, ld_qdi->timing + 2 * ap->port_no);
- /* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
- outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- * qdi6580_set_piomode - PIO setup for single channel
+ * qdi65x0_set_piomode - PIO setup for QDI65x0
* @ap: Port
* @adev: Device
*
* In single channel mode the 6580 has one clock per device and we can
* avoid the requirement to clock switch. We also have to load the timing
* into the right clock according to whether we are master or slave.
+ *
+ * In dual channel mode the 6580 has one clock per channel and we have
+ * to software clockswitch in qc_issue.
*/
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
struct legacy_data *ld_qdi = ap->host->private_data;
@@ -720,9 +668,14 @@
}
timing = (recovery << 4) | active | 0x08;
ld_qdi->clock[adev->devno] = timing;
- outb(timing, ld_qdi->timing + 2 * adev->devno);
+
+ if (ld_qdi->type == QDI6580)
+ outb(timing, ld_qdi->timing + 2 * adev->devno);
+ else
+ outb(timing, ld_qdi->timing + 2 * ap->port_no);
+
/* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
+ if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA)
outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
}
@@ -789,20 +742,20 @@
static struct ata_port_operations qdi6500_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6500_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6580_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580dp_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6580dp_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
@@ -879,29 +832,29 @@
};
static struct legacy_controller controllers[] = {
- {"BIOS", &legacy_port_ops, 0x1F,
+ {"BIOS", &legacy_port_ops, ATA_PIO4,
ATA_FLAG_NO_IORDY, 0, NULL },
- {"Snooping", &simple_port_ops, 0x1F,
+ {"Snooping", &simple_port_ops, ATA_PIO4,
0, 0, NULL },
- {"PDC20230", &pdc20230_port_ops, 0x7,
+ {"PDC20230", &pdc20230_port_ops, ATA_PIO2,
ATA_FLAG_NO_IORDY,
ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL },
- {"HT6560A", &ht6560a_port_ops, 0x07,
+ {"HT6560A", &ht6560a_port_ops, ATA_PIO2,
ATA_FLAG_NO_IORDY, 0, NULL },
- {"HT6560B", &ht6560b_port_ops, 0x1F,
+ {"HT6560B", &ht6560b_port_ops, ATA_PIO4,
ATA_FLAG_NO_IORDY, 0, NULL },
- {"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
+ {"OPTI82C611A", &opti82c611a_port_ops, ATA_PIO3,
0, 0, NULL },
- {"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
+ {"OPTI82C46X", &opti82c46x_port_ops, ATA_PIO3,
0, 0, NULL },
- {"QDI6500", &qdi6500_port_ops, 0x07,
+ {"QDI6500", &qdi6500_port_ops, ATA_PIO2,
ATA_FLAG_NO_IORDY,
ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
- {"QDI6580", &qdi6580_port_ops, 0x1F,
+ {"QDI6580", &qdi6580_port_ops, ATA_PIO4,
0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
- {"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
+ {"QDI6580DP", &qdi6580dp_port_ops, ATA_PIO4,
0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
- {"W83759A", &winbond_port_ops, 0x1F,
+ {"W83759A", &winbond_port_ops, ATA_PIO4,
0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
winbond_port }
};
@@ -1022,6 +975,7 @@
ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
if (!io_addr || !ctrl_addr)
goto fail;
+ ld->type = probe->type;
if (controller->setup)
if (controller->setup(pdev, probe, ld) < 0)
goto fail;
@@ -1306,6 +1260,7 @@
MODULE_DESCRIPTION("low-level driver for legacy ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("pata_qdi");
MODULE_ALIAS("pata_winbond");
module_param(probe_all, int, 0);
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 2fcac51..3e17463 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -780,7 +780,7 @@
}
task_irq = bcom_get_task_irq(dmatsk);
- ret = request_irq(task_irq, &mpc52xx_ata_task_irq, IRQF_DISABLED,
+ ret = request_irq(task_irq, &mpc52xx_ata_task_irq, 0,
"ATA task", priv);
if (ret) {
dev_err(&op->dev, "error requesting DMA IRQ\n");
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index f305400..a72ab0d 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -11,6 +11,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/ata_platform.h>
@@ -57,11 +59,11 @@
prop = of_get_property(dn, "reg-shift", NULL);
if (prop)
- reg_shift = *prop;
+ reg_shift = be32_to_cpup(prop);
prop = of_get_property(dn, "pio-mode", NULL);
if (prop) {
- pio_mode = *prop;
+ pio_mode = be32_to_cpup(prop);
if (pio_mode > 6) {
dev_err(&ofdev->dev, "invalid pio-mode\n");
return -EINVAL;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index b1511f3..7d63f24 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -63,6 +63,7 @@
};
static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int pdc2027x_reinit_one(struct pci_dev *pdev);
static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@@ -126,6 +127,10 @@
.id_table = pdc2027x_pci_tbl,
.probe = pdc2027x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = pdc2027x_reinit_one,
+#endif
};
static struct scsi_host_template pdc2027x_sht = {
@@ -754,6 +759,31 @@
IRQF_SHARED, &pdc2027x_sht);
}
+#ifdef CONFIG_PM
+static int pdc2027x_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ unsigned int board_idx;
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
+ pdev->device == PCI_DEVICE_ID_PROMISE_20270)
+ board_idx = PDC_UDMA_100;
+ else
+ board_idx = PDC_UDMA_133;
+
+ if (pdc_hardware_init(host, board_idx))
+ return -EIO;
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
/**
* pdc2027x_init - Called after this module is loaded into the kernel.
*/
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
deleted file mode 100644
index 45879dc..0000000
--- a/drivers/ata/pata_qdi.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * pata_qdi.c - QDI VLB ATA controllers
- * (C) 2006 Red Hat
- *
- * This driver mostly exists as a proof of concept for non PCI devices under
- * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
- * useful.
- *
- * Tuning code written from the documentation at
- * http://www.ryston.cz/petr/vlb/qd6500.html
- * http://www.ryston.cz/petr/vlb/qd6580.html
- *
- * Probe code based on drivers/ide/legacy/qd65xx.c
- * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@ens-lyon.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/platform_device.h>
-
-#define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.3.1"
-
-#define NR_HOST 4 /* Two 6580s */
-
-struct qdi_data {
- unsigned long timing;
- u8 clock[2];
- u8 last;
- int fast;
- struct platform_device *platform_dev;
-
-};
-
-static struct ata_host *qdi_host[NR_HOST];
-static struct qdi_data qdi_data[NR_HOST];
-static int nr_qdi_host;
-
-#ifdef MODULE
-static int probe_qdi = 1;
-#else
-static int probe_qdi;
-#endif
-
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct qdi_data *qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- qdi->clock[adev->devno] = timing;
-
- outb(timing, qdi->timing);
-}
-
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct qdi_data *qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- qdi->clock[adev->devno] = timing;
-
- outb(timing, qdi->timing);
-
- /* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
- outb(0x5F, (qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- * qdi_qc_issue - command issue
- * @qc: command pending
- *
- * Called when the libata layer is about to issue a command. We wrap
- * this interface so that we can load the correct ATA timings.
- */
-
-static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct ata_device *adev = qc->dev;
- struct qdi_data *qdi = ap->host->private_data;
-
- if (qdi->clock[adev->devno] != qdi->last) {
- if (adev->pio_mode) {
- qdi->last = qdi->clock[adev->devno];
- outb(qdi->clock[adev->devno], qdi->timing);
- }
- }
- return ata_sff_qc_issue(qc);
-}
-
-static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
-{
- if (ata_id_has_dword_io(dev->id)) {
- struct ata_port *ap = dev->link->ap;
- int slop = buflen & 3;
-
- if (rw == READ)
- ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-
- if (unlikely(slop)) {
- __le32 pad;
- if (rw == READ) {
- pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
- memcpy(buf + buflen - slop, &pad, slop);
- } else {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- }
- buflen += 4 - slop;
- }
- } else
- buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
-
- return buflen;
-}
-
-static struct scsi_host_template qdi_sht = {
- ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations qdi6500_port_ops = {
- .inherits = &ata_sff_port_ops,
- .qc_issue = qdi_qc_issue,
- .sff_data_xfer = qdi_data_xfer,
- .cable_detect = ata_cable_40wire,
- .set_piomode = qdi6500_set_piomode,
-};
-
-static struct ata_port_operations qdi6580_port_ops = {
- .inherits = &qdi6500_port_ops,
- .set_piomode = qdi6580_set_piomode,
-};
-
-/**
- * qdi_init_one - attach a qdi interface
- * @type: Type to display
- * @io: I/O port start
- * @irq: interrupt line
- * @fast: True if on a > 33Mhz VLB
- *
- * Register an ISA bus IDE interface. Such interfaces are PIO and we
- * assume do not support IRQ sharing.
- */
-
-static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
-{
- unsigned long ctl = io + 0x206;
- struct platform_device *pdev;
- struct ata_host *host;
- struct ata_port *ap;
- void __iomem *io_addr, *ctl_addr;
- int ret;
-
- /*
- * Fill in a probe structure first of all
- */
-
- pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- ret = -ENOMEM;
- io_addr = devm_ioport_map(&pdev->dev, io, 8);
- ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1);
- if (!io_addr || !ctl_addr)
- goto fail;
-
- ret = -ENOMEM;
- host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
- goto fail;
- ap = host->ports[0];
-
- if (type == 6580) {
- ap->ops = &qdi6580_port_ops;
- ap->pio_mask = ATA_PIO4;
- ap->flags |= ATA_FLAG_SLAVE_POSS;
- } else {
- ap->ops = &qdi6500_port_ops;
- ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */
- ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
- }
-
- ap->ioaddr.cmd_addr = io_addr;
- ap->ioaddr.altstatus_addr = ctl_addr;
- ap->ioaddr.ctl_addr = ctl_addr;
- ata_sff_std_ports(&ap->ioaddr);
-
- ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
-
- /*
- * Hook in a private data structure per channel
- */
- ap->private_data = &qdi_data[nr_qdi_host];
-
- qdi_data[nr_qdi_host].timing = port;
- qdi_data[nr_qdi_host].fast = fast;
- qdi_data[nr_qdi_host].platform_dev = pdev;
-
- printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
-
- /* activate */
- ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
- if (ret)
- goto fail;
-
- qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
- return 0;
-
- fail:
- platform_device_unregister(pdev);
- return ret;
-}
-
-/**
- * qdi_init - attach qdi interfaces
- *
- * Attach qdi IDE interfaces by scanning the ports it may occupy.
- */
-
-static __init int qdi_init(void)
-{
- unsigned long flags;
- static const unsigned long qd_port[2] = { 0x30, 0xB0 };
- static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
- static const int ide_irq[2] = { 14, 15 };
-
- int ct = 0;
- int i;
-
- if (probe_qdi == 0)
- return -ENODEV;
-
- /*
- * Check each possible QD65xx base address
- */
-
- for (i = 0; i < 2; i++) {
- unsigned long port = qd_port[i];
- u8 r, res;
-
-
- if (request_region(port, 2, "pata_qdi")) {
- /* Check for a card */
- local_irq_save(flags);
- r = inb_p(port);
- outb_p(0x19, port);
- res = inb_p(port);
- outb_p(r, port);
- local_irq_restore(flags);
-
- /* Fail */
- if (res == 0x19)
- {
- release_region(port, 2);
- continue;
- }
-
- /* Passes the presence test */
- r = inb_p(port + 1); /* Check port agrees with port set */
- if ((r & 2) >> 1 != i) {
- release_region(port, 2);
- continue;
- }
-
- /* Check card type */
- if ((r & 0xF0) == 0xC0) {
- /* QD6500: single channel */
- if (r & 8) {
- /* Disabled ? */
- release_region(port, 2);
- continue;
- }
- if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
- ct++;
- }
- if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
- /* QD6580: dual channel */
- if (!request_region(port + 2 , 2, "pata_qdi"))
- {
- release_region(port, 2);
- continue;
- }
- res = inb(port + 3);
- if (res & 1) {
- /* Single channel mode */
- if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
- ct++;
- } else {
- /* Dual channel mode */
- if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0)
- ct++;
- if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0)
- ct++;
- }
- }
- }
- }
- if (ct != 0)
- return 0;
- return -ENODEV;
-}
-
-static __exit void qdi_exit(void)
-{
- int i;
-
- for (i = 0; i < nr_qdi_host; i++) {
- ata_host_detach(qdi_host[i]);
- /* Free the control resource. The 6580 dual channel has the resources
- * claimed as a pair of 2 byte resources so we need no special cases...
- */
- release_region(qdi_data[i].timing, 2);
- platform_device_unregister(qdi_data[i].platform_dev);
- }
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("low-level driver for qdi ATA");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-module_init(qdi_init);
-module_exit(qdi_exit);
-
-module_param(probe_qdi, int, 0);
-
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index 4d318f8..e6a2dd7 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -86,6 +86,8 @@
return ata_sff_prereset(link, deadline);
}
+static DEFINE_SPINLOCK(rdc_lock);
+
/**
* rdc_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
@@ -101,6 +103,7 @@
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
@@ -124,6 +127,8 @@
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ spin_lock_irqsave(&rdc_lock, flags);
+
/* PIO configuration clears DTE unconditionally. It will be
* programmed in set_dmamode which is guaranteed to be called
* after set_piomode if any DMA mode is available.
@@ -161,6 +166,8 @@
pci_read_config_byte(dev, 0x48, &udma_enable);
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&rdc_lock, flags);
}
/**
@@ -177,6 +184,7 @@
static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
@@ -190,6 +198,8 @@
{ 2, 1 },
{ 2, 3 }, };
+ spin_lock_irqsave(&rdc_lock, flags);
+
pci_read_config_word(dev, master_port, &master_data);
pci_read_config_byte(dev, 0x48, &udma_enable);
@@ -271,6 +281,8 @@
pci_write_config_word(dev, master_port, master_data);
}
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&rdc_lock, flags);
}
static struct ata_port_operations rdc_pata_ops = {
@@ -375,6 +387,10 @@
.id_table = rdc_pci_tbl,
.probe = rdc_init_one,
.remove = rdc_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
};
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index e2c1825..c0e603a 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -38,7 +38,7 @@
#include <scsi/scsi_host.h>
#include <linux/libata.h>
-#define DRV_NAME "sc1200"
+#define DRV_NAME "pata_sc1200"
#define DRV_VERSION "0.2.6"
#define SC1200_REV_A 0x00
@@ -86,10 +86,14 @@
static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u32 pio_timings[4][5] = {
- {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
- {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
- {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
- {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz
+ /* format0, 33Mhz */
+ { 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 },
+ /* format1, 33Mhz */
+ { 0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010 },
+ /* format1, 48Mhz */
+ { 0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021 },
+ /* format1, 66Mhz */
+ { 0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131 }
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index eb748e3..e265f83 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -826,18 +826,6 @@
}
/**
- * scc_pata_prereset - prepare for reset
- * @ap: ATA port to be reset
- * @deadline: deadline jiffies for the operation
- */
-
-static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
-{
- link->ap->cbl = ATA_CBL_PATA80;
- return ata_sff_prereset(link, deadline);
-}
-
-/**
* scc_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
@@ -946,7 +934,7 @@
.bmdma_status = scc_bmdma_status,
.sff_data_xfer = scc_data_xfer,
- .prereset = scc_pata_prereset,
+ .cable_detect = ata_cable_80wire,
.softreset = scc_softreset,
.postreset = scc_postreset,
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 86dd714e..71eaf38 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -58,14 +58,15 @@
};
/**
- * dell_cable - Dell serverworks cable detection
+ * oem_cable - Dell/Sun serverworks cable detection
* @ap: ATA port to do cable detect
*
- * Dell hide the 40/80 pin select for their interfaces in the top two
- * bits of the subsystem ID.
+ * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
+ * for their interfaces in the top two bits of the subsystem ID.
*/
-static int dell_cable(struct ata_port *ap) {
+static int oem_cable(struct ata_port *ap)
+{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
@@ -73,66 +74,21 @@
return ATA_CBL_PATA40;
}
-/**
- * sun_cable - Sun Cobalt 'Alpine' cable detection
- * @ap: ATA port to do cable select
- *
- * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
- * subsystem ID the same as dell. We could use one function but we may
- * need to extend the Dell one in future
- */
-
-static int sun_cable(struct ata_port *ap) {
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
- return ATA_CBL_PATA80;
- return ATA_CBL_PATA40;
-}
-
-/**
- * osb4_cable - OSB4 cable detect
- * @ap: ATA port to check
- *
- * The OSB4 isn't UDMA66 capable so this is easy
- */
-
-static int osb4_cable(struct ata_port *ap) {
- return ATA_CBL_PATA40;
-}
-
-/**
- * csb_cable - CSB5/6 cable detect
- * @ap: ATA port to check
- *
- * Serverworks default arrangement is to use the drive side detection
- * only.
- */
-
-static int csb_cable(struct ata_port *ap) {
- return ATA_CBL_PATA_UNK;
-}
-
struct sv_cable_table {
int device;
int subvendor;
int (*cable_detect)(struct ata_port *ap);
};
-/*
- * Note that we don't copy the old serverworks code because the old
- * code contains obvious mistakes
- */
-
static struct sv_cable_table cable_detect[] = {
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
- { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown },
{ }
};
@@ -393,6 +349,31 @@
pci_write_config_byte(pdev, 0x5A, btr);
}
+static int serverworks_fixup(struct pci_dev *pdev)
+{
+ int rc = 0;
+
+ /* Force master latency timer to 64 PCI clocks */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
+ rc = serverworks_fixup_osb4(pdev);
+ break;
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+ ata_pci_bmdma_clear_simplex(pdev);
+ /* fall through */
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+ rc = serverworks_fixup_csb(pdev);
+ break;
+ case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
+ serverworks_fixup_ht1000(pdev);
+ break;
+ }
+
+ return rc;
+}
static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -430,13 +411,12 @@
if (rc)
return rc;
- /* Force master latency timer to 64 PCI clocks */
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+ rc = serverworks_fixup(pdev);
/* OSB4 : South Bridge and IDE */
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
/* Select non UDMA capable OSB4 if we can't do fixups */
- if ( serverworks_fixup_osb4(pdev) < 0)
+ if (rc < 0)
ppi[0] = &info[1];
}
/* setup CSB5/CSB6 : South Bridge and IDE option RAID */
@@ -446,19 +426,13 @@
/* If the returned btr is the newer revision then
select the right info block */
- if (serverworks_fixup_csb(pdev) == 3)
+ if (rc == 3)
ppi[0] = &info[3];
/* Is this the 3rd channel CSB6 IDE ? */
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
ppi[1] = &ata_dummy_port_info;
}
- /* setup HT1000E */
- else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
- serverworks_fixup_ht1000(pdev);
-
- if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
- ata_pci_bmdma_clear_simplex(pdev);
return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
}
@@ -473,24 +447,7 @@
if (rc)
return rc;
- /* Force master latency timer to 64 PCI clocks */
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
-
- switch (pdev->device) {
- case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
- serverworks_fixup_osb4(pdev);
- break;
- case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- ata_pci_bmdma_clear_simplex(pdev);
- /* fall through */
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
- serverworks_fixup_csb(pdev);
- break;
- case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
- serverworks_fixup_ht1000(pdev);
- break;
- }
+ (void)serverworks_fixup(pdev);
ata_host_resume(host);
return 0;
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 31f759b..b92eacf 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -38,11 +38,12 @@
/**
* sil680_selreg - return register base
- * @hwif: interface
+ * @ap: ATA interface
* @r: config offset
*
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
+ * Turn a config register offset into the right address in PCI space
+ * to access the control register in question.
+ *
* Thankfully this is a configuration operation so isn't performance
* criticial.
*/
@@ -56,12 +57,12 @@
/**
* sil680_seldev - return register base
- * @hwif: interface
+ * @ap: ATA interface
* @r: config offset
*
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
- * including accounting for the unit shift.
+ * Turn a config register offset into the right address in PCI space
+ * to access the control register in question including accounting for
+ * the unit shift.
*/
static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
@@ -81,7 +82,8 @@
* space for us.
*/
-static int sil680_cable_detect(struct ata_port *ap) {
+static int sil680_cable_detect(struct ata_port *ap)
+{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned long addr = sil680_selreg(ap, 0);
u8 ata66;
@@ -93,7 +95,7 @@
}
/**
- * sil680_set_piomode - set initial PIO mode data
+ * sil680_set_piomode - set PIO mode data
* @ap: ATA interface
* @adev: ATA device
*
@@ -104,8 +106,12 @@
static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
- static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
+ static const u16 speed_p[5] = {
+ 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1
+ };
+ static const u16 speed_t[5] = {
+ 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1
+ };
unsigned long tfaddr = sil680_selreg(ap, 0x02);
unsigned long addr = sil680_seldev(ap, adev, 0x04);
@@ -140,22 +146,23 @@
}
/**
- * sil680_set_dmamode - set initial DMA mode data
+ * sil680_set_dmamode - set DMA mode data
* @ap: ATA interface
* @adev: ATA device
*
- * Program the MWDMA/UDMA modes for the sil680 k
- * chipset. The MWDMA mode values are pulled from a lookup table
+ * Program the MWDMA/UDMA modes for the sil680 chipset.
+ *
+ * The MWDMA mode values are pulled from a lookup table
* while the chipset uses mode number for UDMA.
*/
static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
- static u8 ultra_table[2][7] = {
+ static const u8 ultra_table[2][7] = {
{ 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */
{ 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */
};
- static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
+ static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned long ma = sil680_seldev(ap, adev, 0x08);
@@ -175,7 +182,7 @@
mode &= ~(0x03 << port_shift);
/* Extract scsc */
- scsc = (scsc & 0x30) ? 1: 0;
+ scsc = (scsc & 0x30) ? 1 : 0;
if (adev->dma_mode >= XFER_UDMA_0) {
multi = 0x10C1;
@@ -248,7 +255,7 @@
{
u8 tmpbyte = 0;
- /* FIXME: double check */
+ /* FIXME: double check */
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
pdev->revision ? 1 : 255);
@@ -266,22 +273,22 @@
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif
- switch(tmpbyte & 0x30) {
- case 0x00:
- /* 133 clock attempt to force it on */
- pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
- break;
- case 0x30:
- /* if clocking is disabled */
- /* 133 clock attempt to force it on */
- pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
- break;
- case 0x10:
- /* 133 already */
- break;
- case 0x20:
- /* BIOS set PCI x2 clocking */
- break;
+ switch (tmpbyte & 0x30) {
+ case 0x00:
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
+ break;
+ case 0x30:
+ /* if clocking is disabled */
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
+ break;
+ case 0x10:
+ /* 133 already */
+ break;
+ case 0x20:
+ /* BIOS set PCI x2 clocking */
+ break;
}
pci_read_config_byte(pdev, 0x8A, &tmpbyte);
@@ -299,12 +306,19 @@
pci_write_config_dword(pdev, 0xB8, 0x43924392);
pci_write_config_dword(pdev, 0xBC, 0x40094009);
- switch(tmpbyte & 0x30) {
- case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
- case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
- case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
- /* This last case is _NOT_ ok */
- case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
+ switch (tmpbyte & 0x30) {
+ case 0x00:
+ printk(KERN_INFO "sil680: 100MHz clock.\n");
+ break;
+ case 0x10:
+ printk(KERN_INFO "sil680: 133MHz clock.\n");
+ break;
+ case 0x20:
+ printk(KERN_INFO "sil680: Using PCI clock.\n");
+ break;
+ /* This last case is _NOT_ ok */
+ case 0x30:
+ printk(KERN_ERR "sil680: Clock disabled ?\n");
}
return tmpbyte & 0x30;
}
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 533f2ae..b0edc7d 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -55,7 +55,7 @@
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
- { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
+ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};
@@ -76,7 +76,7 @@
}
/**
- * sis_old_port_base - return PCI configuration base for dev
+ * sis_old_port_base - return PCI configuration base for dev
* @adev: device
*
* Returns the base of the PCI configuration registers for this port
@@ -85,11 +85,34 @@
static int sis_old_port_base(struct ata_device *adev)
{
- return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno);
+ return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno);
}
/**
- * sis_133_cable_detect - check for 40/80 pin
+ * sis_port_base - return PCI configuration base for dev
+ * @adev: device
+ *
+ * Returns the base of the PCI configuration registers for this port
+ * number.
+ */
+
+static int sis_port_base(struct ata_device *adev)
+{
+ struct ata_port *ap = adev->link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = 0x40;
+ u32 reg54;
+
+ /* If bit 30 is set then the registers are mapped at 0x70 not 0x40 */
+ pci_read_config_dword(pdev, 0x54, ®54);
+ if (reg54 & 0x40000000)
+ port = 0x70;
+
+ return port + (8 * ap->port_no) + (4 * adev->devno);
+}
+
+/**
+ * sis_133_cable_detect - check for 40/80 pin
* @ap: Port
* @deadline: deadline jiffies for the operation
*
@@ -110,7 +133,7 @@
}
/**
- * sis_66_cable_detect - check for 40/80 pin
+ * sis_66_cable_detect - check for 40/80 pin
* @ap: Port
*
* Perform cable detection on the UDMA66, UDMA100 and early UDMA133
@@ -132,7 +155,7 @@
/**
- * sis_pre_reset - probe begin
+ * sis_pre_reset - probe begin
* @link: ATA link
* @deadline: deadline jiffies for the operation
*
@@ -160,7 +183,7 @@
/**
- * sis_set_fifo - Set RWP fifo bits for this device
+ * sis_set_fifo - Set RWP fifo bits for this device
* @ap: Port
* @adev: Device
*
@@ -203,13 +226,13 @@
static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port = sis_old_port_base(adev);
u8 t1, t2;
int speed = adev->pio_mode - XFER_PIO_0;
- const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
- const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
+ static const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
+ static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
sis_set_fifo(ap, adev);
@@ -240,11 +263,11 @@
static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port = sis_old_port_base(adev);
int speed = adev->pio_mode - XFER_PIO_0;
- const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+ static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
sis_set_fifo(ap, adev);
@@ -265,20 +288,19 @@
static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int port = 0x40;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port;
u32 t1;
- u32 reg54;
int speed = adev->pio_mode - XFER_PIO_0;
- const u32 timing133[] = {
+ static const u32 timing133[] = {
0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x0C266000,
0x04263000,
0x0C0A3000,
0x05093000
};
- const u32 timing100[] = {
+ static const u32 timing100[] = {
0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x091C4000,
0x031C2000,
@@ -288,12 +310,7 @@
sis_set_fifo(ap, adev);
- /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
- pci_read_config_dword(pdev, 0x54, ®54);
- if (reg54 & 0x40000000)
- port = 0x70;
- port += 8 * ap->port_no + 4 * adev->devno;
-
+ port = sis_port_base(adev);
pci_read_config_dword(pdev, port, &t1);
t1 &= 0xC0C00FFF; /* Mask out timing */
@@ -319,13 +336,13 @@
static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u16 timing;
- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
pci_read_config_word(pdev, drive_pci, &timing);
@@ -358,14 +375,14 @@
static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u16 timing;
/* MWDMA 0-2 and UDMA 0-5 */
- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
pci_read_config_word(pdev, drive_pci, &timing);
@@ -397,12 +414,12 @@
static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u8 timing;
- const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
+ static const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
pci_read_config_byte(pdev, drive_pci + 1, &timing);
@@ -431,7 +448,7 @@
static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u8 timing;
@@ -464,32 +481,34 @@
static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int speed = adev->dma_mode - XFER_MW_DMA_0;
- int port = 0x40;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port;
u32 t1;
- u32 reg54;
- /* bits 4- cycle time 8 - cvs time */
- static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
- static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
-
- /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
- pci_read_config_dword(pdev, 0x54, ®54);
- if (reg54 & 0x40000000)
- port = 0x70;
- port += (8 * ap->port_no) + (4 * adev->devno);
-
+ port = sis_port_base(adev);
pci_read_config_dword(pdev, port, &t1);
if (adev->dma_mode < XFER_UDMA_0) {
+ /* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */
+ static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 };
+ static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 };
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+
+ t1 &= 0xC0C00FFF;
+ /* disable UDMA */
t1 &= ~0x00000004;
- /* FIXME: need data sheet to add MWDMA here. Also lacking on
- ide/pci driver */
+ if (t1 & 0x08)
+ t1 |= timing_u133[speed];
+ else
+ t1 |= timing_u100[speed];
} else {
- speed = adev->dma_mode - XFER_UDMA_0;
- /* if & 8 no UDMA133 - need info for ... */
+ /* bits 4- cycle time 8 - cvs time */
+ static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
+ static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
+ int speed = adev->dma_mode - XFER_UDMA_0;
+
t1 &= ~0x00000FF0;
+ /* enable UDMA */
t1 |= 0x00000004;
if (t1 & 0x08)
t1 |= timing_u133[speed];
@@ -499,6 +518,27 @@
pci_write_config_dword(pdev, port, t1);
}
+/**
+ * sis_133_mode_filter - mode selection filter
+ * @adev: ATA device
+ *
+ * Block UDMA6 on devices that do not support it.
+ */
+
+static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ struct ata_port *ap = adev->link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = sis_port_base(adev);
+ u32 t1;
+
+ pci_read_config_dword(pdev, port, &t1);
+ /* if ATA133 is disabled, mask it out */
+ if (!(t1 & 0x08))
+ mask &= ~(0xC0 << ATA_SHIFT_UDMA);
+ return mask;
+}
+
static struct scsi_host_template sis_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
@@ -520,6 +560,7 @@
.set_piomode = sis_133_set_piomode,
.set_dmamode = sis_133_set_dmamode,
.cable_detect = sis_133_cable_detect,
+ .mode_filter = sis_133_mode_filter,
};
static struct ata_port_operations sis_133_early_ops = {
@@ -588,7 +629,7 @@
static const struct ata_port_info sis_info133 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- /* No MWDMA */
+ .mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_ops,
};
@@ -669,7 +710,7 @@
* @pdev: PCI device to register
* @ent: Entry in sis_pci_tbl matching with @pdev
*
- * Called from kernel PCI layer. We probe for combined mode (sigh),
+ * Called from kernel PCI layer. We probe for combined mode (sigh),
* and then hand over control to libata, for it to do the rest.
*
* LOCKING:
@@ -769,17 +810,20 @@
switch(trueid) {
case 0x5518: /* SIS 962/963 */
+ dev_info(&pdev->dev,
+ "SiS 962/963 MuTIOL IDE UDMA133 controller\n");
chipset = &sis133;
if ((idemisc & 0x40000000) == 0) {
pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000);
- printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+ dev_info(&pdev->dev,
+ "Switching to 5513 register mapping\n");
}
break;
case 0x0180: /* SIS 965/965L */
- chipset = &sis133;
+ chipset = &sis133;
break;
case 0x1180: /* SIS 966/966L */
- chipset = &sis133;
+ chipset = &sis133;
break;
}
}
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index c06ce8c..24cf200 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -1,6 +1,7 @@
/*
* pata_sl82c105.c - SL82C105 PATA for new ATA layer
* (C) 2005 Red Hat Inc
+ * (C) 2011 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/sl82c105.c
* SL82C105/Winbond 553 IDE driver
@@ -289,6 +290,14 @@
return bridge->revision;
}
+static void sl82c105_fixup(struct pci_dev *pdev)
+{
+ u32 val;
+
+ pci_read_config_dword(pdev, 0x40, &val);
+ val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
+ pci_write_config_dword(pdev, 0x40, val);
+}
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
@@ -306,7 +315,6 @@
/* for now use only the first port */
const struct ata_port_info *ppi[] = { &info_early,
NULL };
- u32 val;
int rev;
int rc;
@@ -325,13 +333,28 @@
else
ppi[0] = &info_dma;
- pci_read_config_dword(dev, 0x40, &val);
- val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
- pci_write_config_dword(dev, 0x40, val);
+ sl82c105_fixup(dev);
return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
}
+#ifdef CONFIG_PM
+static int sl82c105_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ sl82c105_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static const struct pci_device_id sl82c105[] = {
{ PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), },
@@ -342,7 +365,11 @@
.name = DRV_NAME,
.id_table = sl82c105,
.probe = sl82c105_init_one,
- .remove = ata_pci_remove_one
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = sl82c105_reinit_one,
+#endif
};
static int __init sl82c105_init(void)
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 8e9f504..255f336 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -509,6 +509,27 @@
}
}
+static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config)
+{
+ u32 timing;
+
+ /* Initialise the FIFO for the enabled channels. */
+ via_config_fifo(pdev, config->flags);
+
+ if (config->udma_mask == ATA_UDMA4) {
+ /* The 66 MHz devices require we enable the clock */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing |= 0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+ if (config->flags & VIA_BAD_CLK66) {
+ /* Disable the 66MHz clock on problem devices */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing &= ~0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+}
+
/**
* via_init_one - discovery callback
* @pdev: PCI device
@@ -570,7 +591,6 @@
struct pci_dev *isa;
const struct via_isa_bridge *config;
u8 enable;
- u32 timing;
unsigned long flags = id->driver_data;
int rc;
@@ -609,9 +629,6 @@
return -ENODEV;
}
- /* Initialise the FIFO for the enabled channels. */
- via_config_fifo(pdev, config->flags);
-
/* Clock set up */
switch (config->udma_mask) {
case 0x00:
@@ -637,12 +654,7 @@
return -ENODEV;
}
- if (config->flags & VIA_BAD_CLK66) {
- /* Disable the 66MHz clock on problem devices */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing &= ~0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
+ via_fixup(pdev, config);
/* We have established the device type, now fire it up */
return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
@@ -661,29 +673,14 @@
static int via_reinit_one(struct pci_dev *pdev)
{
- u32 timing;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- const struct via_isa_bridge *config = host->private_data;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
- via_config_fifo(pdev, config->flags);
-
- if (config->udma_mask == ATA_UDMA4) {
- /* The 66 MHz devices require we enable the clock */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing |= 0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
- if (config->flags & VIA_BAD_CLK66) {
- /* Disable the 66MHz clock on problem devices */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing &= ~0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
+ via_fixup(pdev, host->private_data);
ata_host_resume(host);
return 0;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 4b6b2090..0b8b8b4 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4087,8 +4087,11 @@
dev_info(&pdev->dev, "slots %u ports %d\n",
(unsigned)MV_MAX_Q_DEPTH, host->n_ports);
- return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
- IRQF_SHARED, &mv6_sht);
+ rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
+ IRQF_SHARED, &mv6_sht);
+ if (!rc)
+ return 0;
+
err:
#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(hpriv->clk)) {
@@ -4110,8 +4113,7 @@
*/
static int __devexit mv_platform_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct ata_host *host = dev_get_drvdata(dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
#if defined(CONFIG_HAVE_CLK)
struct mv_host_priv *hpriv = host->private_data;
#endif
@@ -4129,7 +4131,7 @@
#ifdef CONFIG_PM
static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
if (host)
return ata_host_suspend(host, state);
else
@@ -4138,7 +4140,7 @@
static int mv_platform_resume(struct platform_device *pdev)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
int ret;
if (host) {
@@ -4353,7 +4355,7 @@
#ifdef CONFIG_PM
static int mv_pci_device_resume(struct pci_dev *pdev)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = pci_get_drvdata(pdev);
int rc;
rc = ata_pci_device_do_resume(pdev);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 55470f3..1e91406 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -268,7 +268,7 @@
struct sil24_atapi_block atapi;
};
-static struct sil24_cerr_info {
+static const struct sil24_cerr_info {
unsigned int err_mask, action;
const char *desc;
} sil24_cerr_db[] = {
@@ -1019,7 +1019,7 @@
/* deal with command error */
if (irq_stat & PORT_IRQ_ERROR) {
- struct sil24_cerr_info *ci = NULL;
+ const struct sil24_cerr_info *ci = NULL;
unsigned int err_mask = 0, action = 0;
u32 context, cerr;
int pmp;
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index fe3c324..65cc424 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -260,7 +260,7 @@
kref_init(&rbdc->kref);
INIT_LIST_HEAD(&rbdc->node);
- rbdc->client = ceph_create_client(opt, rbdc);
+ rbdc->client = ceph_create_client(opt, rbdc, 0, 0);
if (IS_ERR(rbdc->client))
goto out_rbdc;
opt = NULL; /* Now rbdc->client is responsible for opt */
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 079c088..e7a5750 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -8,10 +8,13 @@
#include <linux/scatterlist.h>
#include <linux/string_helpers.h>
#include <scsi/scsi_cmnd.h>
+#include <linux/idr.h>
#define PART_BITS 4
-static int major, index;
+static int major;
+static DEFINE_IDA(vd_index_ida);
+
struct workqueue_struct *virtblk_wq;
struct virtio_blk
@@ -35,6 +38,9 @@
/* What host tells us, plus 2 for header & tailer. */
unsigned int sg_elems;
+ /* Ida index - used to track minor number allocations. */
+ int index;
+
/* Scatterlist: can be too big for stack. */
struct scatterlist sg[/*sg_elems*/];
};
@@ -276,6 +282,11 @@
return index << PART_BITS;
}
+static int minor_to_index(int minor)
+{
+ return minor >> PART_BITS;
+}
+
static ssize_t virtblk_serial_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -341,14 +352,17 @@
{
struct virtio_blk *vblk;
struct request_queue *q;
- int err;
+ int err, index;
u64 cap;
u32 v, blk_size, sg_elems, opt_io_size;
u16 min_io_size;
u8 physical_block_exp, alignment_offset;
- if (index_to_minor(index) >= 1 << MINORBITS)
- return -ENOSPC;
+ err = ida_simple_get(&vd_index_ida, 0, minor_to_index(1 << MINORBITS),
+ GFP_KERNEL);
+ if (err < 0)
+ goto out;
+ index = err;
/* We need to know how many segments before we allocate. */
err = virtio_config_val(vdev, VIRTIO_BLK_F_SEG_MAX,
@@ -365,7 +379,7 @@
sizeof(vblk->sg[0]) * sg_elems, GFP_KERNEL);
if (!vblk) {
err = -ENOMEM;
- goto out;
+ goto out_free_index;
}
INIT_LIST_HEAD(&vblk->reqs);
@@ -421,7 +435,7 @@
vblk->disk->private_data = vblk;
vblk->disk->fops = &virtblk_fops;
vblk->disk->driverfs_dev = &vdev->dev;
- index++;
+ vblk->index = index;
/* configure queue flush support */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
@@ -516,6 +530,8 @@
vdev->config->del_vqs(vdev);
out_free_vblk:
kfree(vblk);
+out_free_index:
+ ida_simple_remove(&vd_index_ida, index);
out:
return err;
}
@@ -523,6 +539,7 @@
static void __devexit virtblk_remove(struct virtio_device *vdev)
{
struct virtio_blk *vblk = vdev->priv;
+ int index = vblk->index;
flush_work(&vblk->config_work);
@@ -538,6 +555,7 @@
mempool_destroy(vblk->pool);
vdev->config->del_vqs(vdev);
kfree(vblk);
+ ida_simple_remove(&vd_index_ida, index);
}
static const struct virtio_device_id id_table[] = {
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 423fd56..4364303 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -298,7 +298,7 @@
config RTC
tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
- && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN
+ && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -346,7 +346,7 @@
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -490,7 +490,7 @@
config PC8736x_GPIO
tristate "NatSemi PC8736x GPIO Support"
- depends on X86_32
+ depends on X86_32 && !UML
default SCx200_GPIO # mostly N
select NSC_GPIO # needed for support routines
help
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index 056b289..3695773 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -336,7 +336,8 @@
off_t j, io_pg_start;
int io_pg_count;
- if (type != 0 || mem->type != 0) {
+ if (type != mem->type ||
+ agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type)) {
return -EINVAL;
}
@@ -380,7 +381,8 @@
struct _hp_private *hp = &hp_private;
int i, io_pg_start, io_pg_count;
- if (type != 0 || mem->type != 0) {
+ if (type != mem->type ||
+ agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type)) {
return -EINVAL;
}
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 2774ac1..66cd0b8 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -923,6 +923,9 @@
{
int ret = -EINVAL;
+ if (intel_private.base.do_idle_maps)
+ return -ENODEV;
+
if (intel_private.clear_fake_agp) {
int start = intel_private.base.stolen_size / PAGE_SIZE;
int end = intel_private.base.gtt_mappable_entries;
@@ -985,6 +988,9 @@
if (mem->page_count == 0)
return 0;
+ if (intel_private.base.do_idle_maps)
+ return -ENODEV;
+
intel_gtt_clear_range(pg_start, mem->page_count);
if (intel_private.base.needs_dmar) {
@@ -1177,6 +1183,25 @@
{
}
+/* Certain Gen5 chipsets require require idling the GPU before
+ * unmapping anything from the GTT when VT-d is enabled.
+ */
+extern int intel_iommu_gfx_mapped;
+static inline int needs_idle_maps(void)
+{
+ const unsigned short gpu_devid = intel_private.pcidev->device;
+
+ /* Query intel_iommu to see if we need the workaround. Presumably that
+ * was loaded first.
+ */
+ if ((gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB ||
+ gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) &&
+ intel_iommu_gfx_mapped)
+ return 1;
+
+ return 0;
+}
+
static int i9xx_setup(void)
{
u32 reg_addr;
@@ -1211,6 +1236,9 @@
intel_private.gtt_bus_addr = reg_addr + gtt_offset;
}
+ if (needs_idle_maps());
+ intel_private.base.do_idle_maps = 1;
+
intel_i9xx_setup_flush();
return 0;
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 1d2ebc7..0689bf6 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -60,6 +60,19 @@
If unsure, say Y.
+config HW_RANDOM_ATMEL
+ tristate "Atmel Random Number Generator support"
+ depends on HW_RANDOM && ARCH_AT91SAM9G45
+ default HW_RANDOM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Atmel AT91 devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atmel-rng.
+
+ If unsure, say Y.
+
config HW_RANDOM_GEODE
tristate "AMD Geode HW Random Number Generator support"
depends on HW_RANDOM && X86_32 && PCI
@@ -222,3 +235,18 @@
module will be called ppc4xx-rng.
If unsure, say N.
+
+config UML_RANDOM
+ depends on UML
+ tristate "Hardware random number generator"
+ help
+ This option enables UML's "hardware" random number generator. It
+ attaches itself to the host's /dev/random, supplying as much entropy
+ as the host has, rather than the small amount the UML gets from its
+ own drivers. It registers itself as a standard hardware random number
+ generator, major 10, minor 183, and the canonical device name is
+ /dev/hwrng.
+ The way to make use of this is to install the rng-tools package
+ (check your distro, or download from
+ http://sourceforge.net/projects/gkernel/). rngd periodically reads
+ /dev/hwrng and injects the entropy into /dev/random.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index c88f244..b2ff526 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
obj-$(CONFIG_HW_RANDOM_INTEL) += intel-rng.o
obj-$(CONFIG_HW_RANDOM_AMD) += amd-rng.o
+obj-$(CONFIG_HW_RANDOM_ATMEL) += atmel-rng.o
obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
obj-$(CONFIG_HW_RANDOM_N2RNG) += n2-rng.o
n2-rng-y := n2-drv.o n2-asm.o
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
new file mode 100644
index 0000000..241df2e
--- /dev/null
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2011 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/hw_random.h>
+#include <linux/platform_device.h>
+
+#define TRNG_CR 0x00
+#define TRNG_ISR 0x1c
+#define TRNG_ODATA 0x50
+
+#define TRNG_KEY 0x524e4700 /* RNG */
+
+struct atmel_trng {
+ struct clk *clk;
+ void __iomem *base;
+ struct hwrng rng;
+};
+
+static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
+ bool wait)
+{
+ struct atmel_trng *trng = container_of(rng, struct atmel_trng, rng);
+ u32 *data = buf;
+
+ /* data ready? */
+ if (readl(trng->base + TRNG_ODATA) & 1) {
+ *data = readl(trng->base + TRNG_ODATA);
+ return 4;
+ } else
+ return 0;
+}
+
+static int atmel_trng_probe(struct platform_device *pdev)
+{
+ struct atmel_trng *trng;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
+ if (!trng)
+ return -ENOMEM;
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name))
+ return -EBUSY;
+
+ trng->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!trng->base)
+ return -EBUSY;
+
+ trng->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(trng->clk))
+ return PTR_ERR(trng->clk);
+
+ ret = clk_enable(trng->clk);
+ if (ret)
+ goto err_enable;
+
+ writel(TRNG_KEY | 1, trng->base + TRNG_CR);
+ trng->rng.name = pdev->name;
+ trng->rng.read = atmel_trng_read;
+
+ ret = hwrng_register(&trng->rng);
+ if (ret)
+ goto err_register;
+
+ platform_set_drvdata(pdev, trng);
+
+ return 0;
+
+err_register:
+ clk_disable(trng->clk);
+err_enable:
+ clk_put(trng->clk);
+
+ return ret;
+}
+
+static int __devexit atmel_trng_remove(struct platform_device *pdev)
+{
+ struct atmel_trng *trng = platform_get_drvdata(pdev);
+
+ hwrng_unregister(&trng->rng);
+
+ writel(TRNG_KEY, trng->base + TRNG_CR);
+ clk_disable(trng->clk);
+ clk_put(trng->clk);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_trng_suspend(struct device *dev)
+{
+ struct atmel_trng *trng = dev_get_drvdata(dev);
+
+ clk_disable(trng->clk);
+
+ return 0;
+}
+
+static int atmel_trng_resume(struct device *dev)
+{
+ struct atmel_trng *trng = dev_get_drvdata(dev);
+
+ return clk_enable(trng->clk);
+}
+
+static const struct dev_pm_ops atmel_trng_pm_ops = {
+ .suspend = atmel_trng_suspend,
+ .resume = atmel_trng_resume,
+};
+#endif /* CONFIG_PM */
+
+static struct platform_driver atmel_trng_driver = {
+ .probe = atmel_trng_probe,
+ .remove = __devexit_p(atmel_trng_remove),
+ .driver = {
+ .name = "atmel-trng",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &atmel_trng_pm_ops,
+#endif /* CONFIG_PM */
+ },
+};
+
+static int __init atmel_trng_init(void)
+{
+ return platform_driver_register(&atmel_trng_driver);
+}
+module_init(atmel_trng_init);
+
+static void __exit atmel_trng_exit(void)
+{
+ platform_driver_unregister(&atmel_trng_driver);
+}
+module_exit(atmel_trng_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("Atmel true random number generator driver");
diff --git a/drivers/char/random.c b/drivers/char/random.c
index c35a785..63e19ba 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -932,7 +932,21 @@
*/
void get_random_bytes(void *buf, int nbytes)
{
- extract_entropy(&nonblocking_pool, buf, nbytes, 0, 0);
+ char *p = buf;
+
+ while (nbytes) {
+ unsigned long v;
+ int chunk = min(nbytes, (int)sizeof(unsigned long));
+
+ if (!arch_get_random_long(&v))
+ break;
+
+ memcpy(buf, &v, chunk);
+ p += chunk;
+ nbytes -= chunk;
+ }
+
+ extract_entropy(&nonblocking_pool, p, nbytes, 0, 0);
}
EXPORT_SYMBOL(get_random_bytes);
@@ -1318,9 +1332,14 @@
DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);
unsigned int get_random_int(void)
{
- __u32 *hash = get_cpu_var(get_random_int_hash);
+ __u32 *hash;
unsigned int ret;
+ if (arch_get_random_int(&ret))
+ return ret;
+
+ hash = get_cpu_var(get_random_int_hash);
+
hash[0] += current->pid + jiffies + get_cycles();
md5_transform(hash, random_int_secret);
ret = hash[0];
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index a1f68af..f228615 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -170,7 +170,7 @@
.ioctl = tpk_ioctl,
};
-struct tty_port_operations null_ops = { };
+static struct tty_port_operations null_ops = { };
static struct tty_driver *ttyprintk_driver;
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index fb68b12..4ca181f 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -19,8 +19,10 @@
*/
#include <linux/cdev.h>
#include <linux/debugfs.h>
+#include <linux/completion.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/freezer.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/list.h>
@@ -73,6 +75,7 @@
static struct ports_driver_data pdrvdata;
DEFINE_SPINLOCK(pdrvdata_lock);
+DECLARE_COMPLETION(early_console_added);
/* This struct holds information that's relevant only for console ports */
struct console {
@@ -151,6 +154,10 @@
int chr_major;
};
+struct port_stats {
+ unsigned long bytes_sent, bytes_received, bytes_discarded;
+};
+
/* This struct holds the per-port data */
struct port {
/* Next port in the list, head is in the ports_device */
@@ -179,6 +186,13 @@
struct dentry *debugfs_file;
/*
+ * Keep count of the bytes sent, received and discarded for
+ * this port for accounting and debugging purposes. These
+ * counts are not reset across port open / close events.
+ */
+ struct port_stats stats;
+
+ /*
* The entries in this struct will be valid if this port is
* hooked up to an hvc console
*/
@@ -347,17 +361,19 @@
}
/* Callers should take appropriate locks */
-static void *get_inbuf(struct port *port)
+static struct port_buffer *get_inbuf(struct port *port)
{
struct port_buffer *buf;
- struct virtqueue *vq;
unsigned int len;
- vq = port->in_vq;
- buf = virtqueue_get_buf(vq, &len);
+ if (port->inbuf)
+ return port->inbuf;
+
+ buf = virtqueue_get_buf(port->in_vq, &len);
if (buf) {
buf->len = len;
buf->offset = 0;
+ port->stats.bytes_received += len;
}
return buf;
}
@@ -384,32 +400,27 @@
static void discard_port_data(struct port *port)
{
struct port_buffer *buf;
- struct virtqueue *vq;
- unsigned int len;
- int ret;
+ unsigned int err;
if (!port->portdev) {
/* Device has been unplugged. vqs are already gone. */
return;
}
- vq = port->in_vq;
- if (port->inbuf)
- buf = port->inbuf;
- else
- buf = virtqueue_get_buf(vq, &len);
+ buf = get_inbuf(port);
- ret = 0;
+ err = 0;
while (buf) {
- if (add_inbuf(vq, buf) < 0) {
- ret++;
+ port->stats.bytes_discarded += buf->len - buf->offset;
+ if (add_inbuf(port->in_vq, buf) < 0) {
+ err++;
free_buf(buf);
}
- buf = virtqueue_get_buf(vq, &len);
+ port->inbuf = NULL;
+ buf = get_inbuf(port);
}
- port->inbuf = NULL;
- if (ret)
+ if (err)
dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
- ret);
+ err);
}
static bool port_has_data(struct port *port)
@@ -417,18 +428,12 @@
unsigned long flags;
bool ret;
- spin_lock_irqsave(&port->inbuf_lock, flags);
- if (port->inbuf) {
- ret = true;
- goto out;
- }
- port->inbuf = get_inbuf(port);
- if (port->inbuf) {
- ret = true;
- goto out;
- }
ret = false;
-out:
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ port->inbuf = get_inbuf(port);
+ if (port->inbuf)
+ ret = true;
+
spin_unlock_irqrestore(&port->inbuf_lock, flags);
return ret;
}
@@ -529,6 +534,8 @@
cpu_relax();
done:
spin_unlock_irqrestore(&port->outvq_lock, flags);
+
+ port->stats.bytes_sent += in_count;
/*
* We're expected to return the amount of data we wrote -- all
* of it
@@ -633,8 +640,8 @@
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
- ret = wait_event_interruptible(port->waitqueue,
- !will_read_block(port));
+ ret = wait_event_freezable(port->waitqueue,
+ !will_read_block(port));
if (ret < 0)
return ret;
}
@@ -677,8 +684,8 @@
if (nonblock)
return -EAGAIN;
- ret = wait_event_interruptible(port->waitqueue,
- !will_write_block(port));
+ ret = wait_event_freezable(port->waitqueue,
+ !will_write_block(port));
if (ret < 0)
return ret;
}
@@ -1059,6 +1066,14 @@
out_offset += snprintf(buf + out_offset, out_count - out_offset,
"outvq_full: %d\n", port->outvq_full);
out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "bytes_sent: %lu\n", port->stats.bytes_sent);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "bytes_received: %lu\n",
+ port->stats.bytes_received);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "bytes_discarded: %lu\n",
+ port->stats.bytes_discarded);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
"is_console: %s\n",
is_console_port(port) ? "yes" : "no");
out_offset += snprintf(buf + out_offset, out_count - out_offset,
@@ -1143,6 +1158,7 @@
port->cons.ws.ws_row = port->cons.ws.ws_col = 0;
port->host_connected = port->guest_connected = false;
+ port->stats = (struct port_stats) { 0 };
port->outvq_full = false;
@@ -1352,6 +1368,7 @@
break;
init_port_console(port);
+ complete(&early_console_added);
/*
* Could remove the port here in case init fails - but
* have to notify the host first.
@@ -1394,6 +1411,13 @@
break;
case VIRTIO_CONSOLE_PORT_NAME:
/*
+ * If we woke up after hibernation, we can get this
+ * again. Skip it in that case.
+ */
+ if (port->name)
+ break;
+
+ /*
* Skip the size of the header and the cpkt to get the size
* of the name that was sent
*/
@@ -1481,8 +1505,7 @@
return;
spin_lock_irqsave(&port->inbuf_lock, flags);
- if (!port->inbuf)
- port->inbuf = get_inbuf(port);
+ port->inbuf = get_inbuf(port);
/*
* Don't queue up data when port is closed. This condition
@@ -1563,7 +1586,7 @@
portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
GFP_KERNEL);
if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
- !portdev->out_vqs) {
+ !portdev->out_vqs) {
err = -ENOMEM;
goto free;
}
@@ -1648,6 +1671,10 @@
struct ports_device *portdev;
int err;
bool multiport;
+ bool early = early_put_chars != NULL;
+
+ /* Ensure to read early_put_chars now */
+ barrier();
portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
if (!portdev) {
@@ -1675,13 +1702,11 @@
multiport = false;
portdev->config.max_nr_ports = 1;
- if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
+ if (virtio_config_val(vdev, VIRTIO_CONSOLE_F_MULTIPORT,
+ offsetof(struct virtio_console_config,
+ max_nr_ports),
+ &portdev->config.max_nr_ports) == 0)
multiport = true;
- vdev->config->get(vdev, offsetof(struct virtio_console_config,
- max_nr_ports),
- &portdev->config.max_nr_ports,
- sizeof(portdev->config.max_nr_ports));
- }
err = init_vqs(portdev);
if (err < 0) {
@@ -1719,6 +1744,19 @@
__send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
VIRTIO_CONSOLE_DEVICE_READY, 1);
+
+ /*
+ * If there was an early virtio console, assume that there are no
+ * other consoles. We need to wait until the hvc_alloc matches the
+ * hvc_instantiate, otherwise tty_open will complain, resulting in
+ * a "Warning: unable to open an initial console" boot failure.
+ * Without multiport this is done in add_port above. With multiport
+ * this might take some host<->guest communication - thus we have to
+ * wait.
+ */
+ if (multiport && early)
+ wait_for_completion(&early_console_added);
+
return 0;
free_vqs:
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 34e9c4f..999d6a0 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -15,3 +15,18 @@
config DW_APB_TIMER
bool
+
+config CLKSRC_DBX500_PRCMU
+ bool "Clocksource PRCMU Timer"
+ depends on UX500_SOC_DB5500 || UX500_SOC_DB8500
+ default y
+ help
+ Use the always on PRCMU Timer as clocksource
+
+config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
+ bool "Clocksource PRCMU Timer sched_clock"
+ depends on (CLKSRC_DBX500_PRCMU && !NOMADIK_MTU_SCHED_CLOCK)
+ select HAVE_SCHED_CLOCK
+ default y
+ help
+ Use the always on PRCMU Timer as sched_clock
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 85ad1646..8d81a1d 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
+obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
\ No newline at end of file
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
new file mode 100644
index 0000000..59feefe
--- /dev/null
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer for ST-Ericsson
+ * sched_clock implementation is based on:
+ * plat-nomadik/timer.c Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * DBx500-PRCMU Timer
+ * The PRCMU has 5 timers which are available in a always-on
+ * power domain. We use the Timer 4 for our always-on clock
+ * source on DB8500 and Timer 3 on DB5500.
+ */
+#include <linux/clockchips.h>
+#include <linux/clksrc-dbx500-prcmu.h>
+
+#include <asm/sched_clock.h>
+
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+#define RATE_32K 32768
+
+#define TIMER_MODE_CONTINOUS 0x1
+#define TIMER_DOWNCOUNT_VAL 0xffffffff
+
+#define PRCMU_TIMER_REF 0
+#define PRCMU_TIMER_DOWNCOUNT 0x4
+#define PRCMU_TIMER_MODE 0x8
+
+#define SCHED_CLOCK_MIN_WRAP 131072 /* 2^32 / 32768 */
+
+static void __iomem *clksrc_dbx500_timer_base;
+
+static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs)
+{
+ u32 count, count2;
+
+ do {
+ count = readl(clksrc_dbx500_timer_base +
+ PRCMU_TIMER_DOWNCOUNT);
+ count2 = readl(clksrc_dbx500_timer_base +
+ PRCMU_TIMER_DOWNCOUNT);
+ } while (count2 != count);
+
+ /* Negate because the timer is a decrementing counter */
+ return ~count;
+}
+
+static struct clocksource clocksource_dbx500_prcmu = {
+ .name = "dbx500-prcmu-timer",
+ .rating = 300,
+ .read = clksrc_dbx500_prcmu_read,
+ .shift = 10,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
+static DEFINE_CLOCK_DATA(cd);
+
+unsigned long long notrace sched_clock(void)
+{
+ u32 cyc;
+
+ if (unlikely(!clksrc_dbx500_timer_base))
+ return 0;
+
+ cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace clksrc_dbx500_prcmu_update_sched_clock(void)
+{
+ u32 cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+#endif
+
+void __init clksrc_dbx500_prcmu_init(void __iomem *base)
+{
+ clksrc_dbx500_timer_base = base;
+
+ /*
+ * The A9 sub system expects the timer to be configured as
+ * a continous looping timer.
+ * The PRCMU should configure it but if it for some reason
+ * don't we do it here.
+ */
+ if (readl(clksrc_dbx500_timer_base + PRCMU_TIMER_MODE) !=
+ TIMER_MODE_CONTINOUS) {
+ writel(TIMER_MODE_CONTINOUS,
+ clksrc_dbx500_timer_base + PRCMU_TIMER_MODE);
+ writel(TIMER_DOWNCOUNT_VAL,
+ clksrc_dbx500_timer_base + PRCMU_TIMER_REF);
+ }
+#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
+ init_sched_clock(&cd, clksrc_dbx500_prcmu_update_sched_clock,
+ 32, RATE_32K);
+#endif
+ clocksource_calc_mult_shift(&clocksource_dbx500_prcmu,
+ RATE_32K, SCHED_CLOCK_MIN_WRAP);
+ clocksource_register(&clocksource_dbx500_prcmu);
+}
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index eedfc99..edaa987 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -12,7 +12,7 @@
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <mach/id.h>
static struct cpufreq_frequency_table freq_table[] = {
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index e0b25de..6d16b4b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -200,6 +200,7 @@
select CRYPTO_BLKCIPHER
select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG
depends on PCI
+ depends on !ARCH_DMA_ADDR_T_64BIT
help
This option allows you to have support for HIFN 795x crypto adapters.
@@ -266,7 +267,7 @@
config CRYPTO_DEV_PICOXCELL
tristate "Support for picoXcell IPSEC and Layer2 crypto engines"
- depends on ARCH_PICOXCELL
+ depends on ARCH_PICOXCELL && HAVE_CLK
select CRYPTO_AES
select CRYPTO_AUTHENC
select CRYPTO_ALGAPI
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index a84250a..fe765f4 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -2744,10 +2744,8 @@
unsigned int freq;
int err;
- if (sizeof(dma_addr_t) > 4) {
- printk(KERN_INFO "HIFN supports only 32-bit addresses.\n");
- return -EINVAL;
- }
+ /* HIFN supports only 32-bit addresses */
+ BUILD_BUG_ON(sizeof(dma_addr_t) != 4);
if (strncmp(hifn_pll_ref, "ext", 3) &&
strncmp(hifn_pll_ref, "pci", 3)) {
diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c
index d0183dd..8944dab 100644
--- a/drivers/crypto/n2_core.c
+++ b/drivers/crypto/n2_core.c
@@ -1006,9 +1006,9 @@
spin_unlock_irqrestore(&qp->lock, flags);
+out:
put_cpu();
-out:
n2_chunk_complete(req, NULL);
return err;
}
@@ -1096,9 +1096,9 @@
spin_unlock_irqrestore(&qp->lock, flags);
+out:
put_cpu();
-out:
n2_chunk_complete(req, err ? NULL : final_iv_addr);
return err;
}
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index db33d30..29b9469f 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -508,10 +508,8 @@
int ret;
struct cpuinfo_x86 *c = &cpu_data(0);
- if (!cpu_has_xcrypt) {
- printk(KERN_NOTICE PFX "VIA PadLock not detected.\n");
+ if (!cpu_has_xcrypt)
return -ENODEV;
- }
if (!cpu_has_xcrypt_enabled) {
printk(KERN_NOTICE PFX "VIA PadLock detected, but not enabled. Hmm, strange...\n");
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 230b5b8..a2b553e 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -34,6 +34,7 @@
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/rtnetlink.h>
@@ -1241,8 +1242,8 @@
spin_unlock_irqrestore(&engine->hw_lock, flags);
list_for_each_entry_safe(req, tmp, &completed, list) {
- req->complete(req);
list_del(&req->list);
+ req->complete(req);
}
}
@@ -1657,10 +1658,33 @@
},
};
-static int __devinit spacc_probe(struct platform_device *pdev,
- unsigned max_ctxs, size_t cipher_pg_sz,
- size_t hash_pg_sz, size_t fifo_sz,
- struct spacc_alg *algs, size_t num_algs)
+#ifdef CONFIG_OF
+static const struct of_device_id spacc_of_id_table[] = {
+ { .compatible = "picochip,spacc-ipsec" },
+ { .compatible = "picochip,spacc-l2" },
+ {}
+};
+#else /* CONFIG_OF */
+#define spacc_of_id_table NULL
+#endif /* CONFIG_OF */
+
+static bool spacc_is_compatible(struct platform_device *pdev,
+ const char *spacc_type)
+{
+ const struct platform_device_id *platid = platform_get_device_id(pdev);
+
+ if (platid && !strcmp(platid->name, spacc_type))
+ return true;
+
+#ifdef CONFIG_OF
+ if (of_device_is_compatible(pdev->dev.of_node, spacc_type))
+ return true;
+#endif /* CONFIG_OF */
+
+ return false;
+}
+
+static int __devinit spacc_probe(struct platform_device *pdev)
{
int i, err, ret = -EINVAL;
struct resource *mem, *irq;
@@ -1669,13 +1693,25 @@
if (!engine)
return -ENOMEM;
- engine->max_ctxs = max_ctxs;
- engine->cipher_pg_sz = cipher_pg_sz;
- engine->hash_pg_sz = hash_pg_sz;
- engine->fifo_sz = fifo_sz;
- engine->algs = algs;
- engine->num_algs = num_algs;
- engine->name = dev_name(&pdev->dev);
+ if (spacc_is_compatible(pdev, "picochip,spacc-ipsec")) {
+ engine->max_ctxs = SPACC_CRYPTO_IPSEC_MAX_CTXS;
+ engine->cipher_pg_sz = SPACC_CRYPTO_IPSEC_CIPHER_PG_SZ;
+ engine->hash_pg_sz = SPACC_CRYPTO_IPSEC_HASH_PG_SZ;
+ engine->fifo_sz = SPACC_CRYPTO_IPSEC_FIFO_SZ;
+ engine->algs = ipsec_engine_algs;
+ engine->num_algs = ARRAY_SIZE(ipsec_engine_algs);
+ } else if (spacc_is_compatible(pdev, "picochip,spacc-l2")) {
+ engine->max_ctxs = SPACC_CRYPTO_L2_MAX_CTXS;
+ engine->cipher_pg_sz = SPACC_CRYPTO_L2_CIPHER_PG_SZ;
+ engine->hash_pg_sz = SPACC_CRYPTO_L2_HASH_PG_SZ;
+ engine->fifo_sz = SPACC_CRYPTO_L2_FIFO_SZ;
+ engine->algs = l2_engine_algs;
+ engine->num_algs = ARRAY_SIZE(l2_engine_algs);
+ } else {
+ return -EINVAL;
+ }
+
+ engine->name = dev_name(&pdev->dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -1711,7 +1747,7 @@
spin_lock_init(&engine->hw_lock);
- engine->clk = clk_get(&pdev->dev, NULL);
+ engine->clk = clk_get(&pdev->dev, "ref");
if (IS_ERR(engine->clk)) {
dev_info(&pdev->dev, "clk unavailable\n");
device_remove_file(&pdev->dev, &dev_attr_stat_irq_thresh);
@@ -1800,72 +1836,33 @@
return 0;
}
-static int __devinit ipsec_probe(struct platform_device *pdev)
-{
- return spacc_probe(pdev, SPACC_CRYPTO_IPSEC_MAX_CTXS,
- SPACC_CRYPTO_IPSEC_CIPHER_PG_SZ,
- SPACC_CRYPTO_IPSEC_HASH_PG_SZ,
- SPACC_CRYPTO_IPSEC_FIFO_SZ, ipsec_engine_algs,
- ARRAY_SIZE(ipsec_engine_algs));
-}
-
-static struct platform_driver ipsec_driver = {
- .probe = ipsec_probe,
- .remove = __devexit_p(spacc_remove),
- .driver = {
- .name = "picoxcell-ipsec",
-#ifdef CONFIG_PM
- .pm = &spacc_pm_ops,
-#endif /* CONFIG_PM */
- },
+static const struct platform_device_id spacc_id_table[] = {
+ { "picochip,spacc-ipsec", },
+ { "picochip,spacc-l2", },
};
-static int __devinit l2_probe(struct platform_device *pdev)
-{
- return spacc_probe(pdev, SPACC_CRYPTO_L2_MAX_CTXS,
- SPACC_CRYPTO_L2_CIPHER_PG_SZ,
- SPACC_CRYPTO_L2_HASH_PG_SZ, SPACC_CRYPTO_L2_FIFO_SZ,
- l2_engine_algs, ARRAY_SIZE(l2_engine_algs));
-}
-
-static struct platform_driver l2_driver = {
- .probe = l2_probe,
+static struct platform_driver spacc_driver = {
+ .probe = spacc_probe,
.remove = __devexit_p(spacc_remove),
.driver = {
- .name = "picoxcell-l2",
+ .name = "picochip,spacc",
#ifdef CONFIG_PM
.pm = &spacc_pm_ops,
#endif /* CONFIG_PM */
+ .of_match_table = spacc_of_id_table,
},
+ .id_table = spacc_id_table,
};
static int __init spacc_init(void)
{
- int ret = platform_driver_register(&ipsec_driver);
- if (ret) {
- pr_err("failed to register ipsec spacc driver");
- goto out;
- }
-
- ret = platform_driver_register(&l2_driver);
- if (ret) {
- pr_err("failed to register l2 spacc driver");
- goto l2_failed;
- }
-
- return 0;
-
-l2_failed:
- platform_driver_unregister(&ipsec_driver);
-out:
- return ret;
+ return platform_driver_register(&spacc_driver);
}
module_init(spacc_init);
static void __exit spacc_exit(void)
{
- platform_driver_unregister(&ipsec_driver);
- platform_driver_unregister(&l2_driver);
+ platform_driver_unregister(&spacc_driver);
}
module_exit(spacc_exit);
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 8a0bb41..dbe76b5 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -416,7 +416,7 @@
/*
* locate current (offending) descriptor
*/
-static struct talitos_desc *current_desc(struct device *dev, int ch)
+static u32 current_desc_hdr(struct device *dev, int ch)
{
struct talitos_private *priv = dev_get_drvdata(dev);
int tail = priv->chan[ch].tail;
@@ -428,23 +428,25 @@
tail = (tail + 1) & (priv->fifo_len - 1);
if (tail == priv->chan[ch].tail) {
dev_err(dev, "couldn't locate current descriptor\n");
- return NULL;
+ return 0;
}
}
- return priv->chan[ch].fifo[tail].desc;
+ return priv->chan[ch].fifo[tail].desc->hdr;
}
/*
* user diagnostics; report root cause of error based on execution unit status
*/
-static void report_eu_error(struct device *dev, int ch,
- struct talitos_desc *desc)
+static void report_eu_error(struct device *dev, int ch, u32 desc_hdr)
{
struct talitos_private *priv = dev_get_drvdata(dev);
int i;
- switch (desc->hdr & DESC_HDR_SEL0_MASK) {
+ if (!desc_hdr)
+ desc_hdr = in_be32(priv->reg + TALITOS_DESCBUF(ch));
+
+ switch (desc_hdr & DESC_HDR_SEL0_MASK) {
case DESC_HDR_SEL0_AFEU:
dev_err(dev, "AFEUISR 0x%08x_%08x\n",
in_be32(priv->reg + TALITOS_AFEUISR),
@@ -488,7 +490,7 @@
break;
}
- switch (desc->hdr & DESC_HDR_SEL1_MASK) {
+ switch (desc_hdr & DESC_HDR_SEL1_MASK) {
case DESC_HDR_SEL1_MDEUA:
case DESC_HDR_SEL1_MDEUB:
dev_err(dev, "MDEUISR 0x%08x_%08x\n",
@@ -550,7 +552,7 @@
if (v_lo & TALITOS_CCPSR_LO_IEU)
dev_err(dev, "invalid execution unit error\n");
if (v_lo & TALITOS_CCPSR_LO_EU)
- report_eu_error(dev, ch, current_desc(dev, ch));
+ report_eu_error(dev, ch, current_desc_hdr(dev, ch));
if (v_lo & TALITOS_CCPSR_LO_GB)
dev_err(dev, "gather boundary error\n");
if (v_lo & TALITOS_CCPSR_LO_GRL)
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index af1a17d..203361e 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -41,7 +41,7 @@
config EDAC_DECODE_MCE
tristate "Decode MCEs in human-readable form (only on AMD for now)"
- depends on CPU_SUP_AMD && X86_MCE
+ depends on CPU_SUP_AMD && X86_MCE_AMD
default y
---help---
Enable this option if you want to decode Machine Check Exceptions
@@ -71,9 +71,6 @@
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
-config EDAC_MCE
- bool
-
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64) K8, F10h"
depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE
@@ -173,8 +170,7 @@
config EDAC_I7CORE
tristate "Intel i7 Core (Nehalem) processors"
- depends on EDAC_MM_EDAC && PCI && X86
- select EDAC_MCE
+ depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
help
Support for error detection and correction the Intel
i7 Core (Nehalem) Integrated Memory Controller that exists on
@@ -216,6 +212,14 @@
Support for error detection and correction the Intel
Clarksboro MCH (Intel 7300 chipset).
+config EDAC_SBRIDGE
+ tristate "Intel Sandy-Bridge Integrated MC"
+ depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
+ depends on EXPERIMENTAL
+ help
+ Support for error detection and correction the Intel
+ Sandy Bridge Integrated Memory Controller.
+
config EDAC_MPC85XX
tristate "Freescale MPC83xx / MPC85xx"
depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 3e23913..196a63d 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -8,7 +8,6 @@
obj-$(CONFIG_EDAC) := edac_stub.o
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
-obj-$(CONFIG_EDAC_MCE) += edac_mce.o
edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
edac_core-y += edac_module.o edac_device_sysfs.o
@@ -29,6 +28,7 @@
obj-$(CONFIG_EDAC_I5400) += i5400_edac.o
obj-$(CONFIG_EDAC_I7300) += i7300_edac.o
obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o
+obj-$(CONFIG_EDAC_SBRIDGE) += sb_edac.o
obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o
obj-$(CONFIG_EDAC_E752X) += e752x_edac.o
obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 9a8bebc..c9eee6d 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -114,10 +114,22 @@
return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func);
}
+/*
+ * Select DCT to which PCI cfg accesses are routed
+ */
+static void f15h_select_dct(struct amd64_pvt *pvt, u8 dct)
+{
+ u32 reg = 0;
+
+ amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, ®);
+ reg &= 0xfffffffe;
+ reg |= dct;
+ amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg);
+}
+
static int f15_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val,
const char *func)
{
- u32 reg = 0;
u8 dct = 0;
if (addr >= 0x140 && addr <= 0x1a0) {
@@ -125,10 +137,7 @@
addr -= 0x100;
}
- amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, ®);
- reg &= 0xfffffffe;
- reg |= dct;
- amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg);
+ f15h_select_dct(pvt, dct);
return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func);
}
@@ -198,6 +207,10 @@
if (boot_cpu_data.x86 == 0xf)
min_scrubrate = 0x0;
+ /* F15h Erratum #505 */
+ if (boot_cpu_data.x86 == 0x15)
+ f15h_select_dct(pvt, 0);
+
return __amd64_set_scrub_rate(pvt->F3, bw, min_scrubrate);
}
@@ -207,6 +220,10 @@
u32 scrubval = 0;
int i, retval = -EINVAL;
+ /* F15h Erratum #505 */
+ if (boot_cpu_data.x86 == 0x15)
+ f15h_select_dct(pvt, 0);
+
amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
scrubval = scrubval & 0x001F;
@@ -751,10 +768,10 @@
* Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs
* are ECC capable.
*/
-static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
+static unsigned long amd64_determine_edac_cap(struct amd64_pvt *pvt)
{
u8 bit;
- enum dev_type edac_cap = EDAC_FLAG_NONE;
+ unsigned long edac_cap = EDAC_FLAG_NONE;
bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= K8_REV_F)
? 19
@@ -1953,11 +1970,9 @@
amd64_handle_ue(mci, m);
}
-void amd64_decode_bus_error(int node_id, struct mce *m, u32 nbcfg)
+void amd64_decode_bus_error(int node_id, struct mce *m)
{
- struct mem_ctl_info *mci = mcis[node_id];
-
- __amd64_decode_bus_error(mci, m);
+ __amd64_decode_bus_error(mcis[node_id], m);
}
/*
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 55b8278..fe90cd4 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -34,11 +34,10 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/workqueue.h>
+#include <linux/edac.h>
-#define EDAC_MC_LABEL_LEN 31
#define EDAC_DEVICE_NAME_LEN 31
#define EDAC_ATTRIB_VALUE_LEN 15
-#define MC_PROC_NAME_MAX_LEN 7
#if PAGE_SHIFT < 20
#define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT))
@@ -101,353 +100,6 @@
#define edac_dev_name(dev) (dev)->dev_name
-/* memory devices */
-enum dev_type {
- DEV_UNKNOWN = 0,
- DEV_X1,
- DEV_X2,
- DEV_X4,
- DEV_X8,
- DEV_X16,
- DEV_X32, /* Do these parts exist? */
- DEV_X64 /* Do these parts exist? */
-};
-
-#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN)
-#define DEV_FLAG_X1 BIT(DEV_X1)
-#define DEV_FLAG_X2 BIT(DEV_X2)
-#define DEV_FLAG_X4 BIT(DEV_X4)
-#define DEV_FLAG_X8 BIT(DEV_X8)
-#define DEV_FLAG_X16 BIT(DEV_X16)
-#define DEV_FLAG_X32 BIT(DEV_X32)
-#define DEV_FLAG_X64 BIT(DEV_X64)
-
-/* memory types */
-enum mem_type {
- MEM_EMPTY = 0, /* Empty csrow */
- MEM_RESERVED, /* Reserved csrow type */
- MEM_UNKNOWN, /* Unknown csrow type */
- MEM_FPM, /* Fast page mode */
- MEM_EDO, /* Extended data out */
- MEM_BEDO, /* Burst Extended data out */
- MEM_SDR, /* Single data rate SDRAM */
- MEM_RDR, /* Registered single data rate SDRAM */
- MEM_DDR, /* Double data rate SDRAM */
- MEM_RDDR, /* Registered Double data rate SDRAM */
- MEM_RMBS, /* Rambus DRAM */
- MEM_DDR2, /* DDR2 RAM */
- MEM_FB_DDR2, /* fully buffered DDR2 */
- MEM_RDDR2, /* Registered DDR2 RAM */
- MEM_XDR, /* Rambus XDR */
- MEM_DDR3, /* DDR3 RAM */
- MEM_RDDR3, /* Registered DDR3 RAM */
-};
-
-#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
-#define MEM_FLAG_RESERVED BIT(MEM_RESERVED)
-#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN)
-#define MEM_FLAG_FPM BIT(MEM_FPM)
-#define MEM_FLAG_EDO BIT(MEM_EDO)
-#define MEM_FLAG_BEDO BIT(MEM_BEDO)
-#define MEM_FLAG_SDR BIT(MEM_SDR)
-#define MEM_FLAG_RDR BIT(MEM_RDR)
-#define MEM_FLAG_DDR BIT(MEM_DDR)
-#define MEM_FLAG_RDDR BIT(MEM_RDDR)
-#define MEM_FLAG_RMBS BIT(MEM_RMBS)
-#define MEM_FLAG_DDR2 BIT(MEM_DDR2)
-#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
-#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
-#define MEM_FLAG_XDR BIT(MEM_XDR)
-#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
-#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
-
-/* chipset Error Detection and Correction capabilities and mode */
-enum edac_type {
- EDAC_UNKNOWN = 0, /* Unknown if ECC is available */
- EDAC_NONE, /* Doesn't support ECC */
- EDAC_RESERVED, /* Reserved ECC type */
- EDAC_PARITY, /* Detects parity errors */
- EDAC_EC, /* Error Checking - no correction */
- EDAC_SECDED, /* Single bit error correction, Double detection */
- EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */
- EDAC_S4ECD4ED, /* Chipkill x4 devices */
- EDAC_S8ECD8ED, /* Chipkill x8 devices */
- EDAC_S16ECD16ED, /* Chipkill x16 devices */
-};
-
-#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
-#define EDAC_FLAG_NONE BIT(EDAC_NONE)
-#define EDAC_FLAG_PARITY BIT(EDAC_PARITY)
-#define EDAC_FLAG_EC BIT(EDAC_EC)
-#define EDAC_FLAG_SECDED BIT(EDAC_SECDED)
-#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED)
-#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED)
-#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
-#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)
-
-/* scrubbing capabilities */
-enum scrub_type {
- SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */
- SCRUB_NONE, /* No scrubber */
- SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */
- SCRUB_SW_SRC, /* Software scrub only errors */
- SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */
- SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */
- SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */
- SCRUB_HW_SRC, /* Hardware scrub only errors */
- SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */
- SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */
-};
-
-#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
-#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC)
-#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC)
-#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE)
-#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG)
-#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC)
-#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC)
-#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE)
-
-/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
-
-/* EDAC internal operation states */
-#define OP_ALLOC 0x100
-#define OP_RUNNING_POLL 0x201
-#define OP_RUNNING_INTERRUPT 0x202
-#define OP_RUNNING_POLL_INTR 0x203
-#define OP_OFFLINE 0x300
-
-/*
- * There are several things to be aware of that aren't at all obvious:
- *
- *
- * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
- *
- * These are some of the many terms that are thrown about that don't always
- * mean what people think they mean (Inconceivable!). In the interest of
- * creating a common ground for discussion, terms and their definitions
- * will be established.
- *
- * Memory devices: The individual chip on a memory stick. These devices
- * commonly output 4 and 8 bits each. Grouping several
- * of these in parallel provides 64 bits which is common
- * for a memory stick.
- *
- * Memory Stick: A printed circuit board that aggregates multiple
- * memory devices in parallel. This is the atomic
- * memory component that is purchaseable by Joe consumer
- * and loaded into a memory socket.
- *
- * Socket: A physical connector on the motherboard that accepts
- * a single memory stick.
- *
- * Channel: Set of memory devices on a memory stick that must be
- * grouped in parallel with one or more additional
- * channels from other memory sticks. This parallel
- * grouping of the output from multiple channels are
- * necessary for the smallest granularity of memory access.
- * Some memory controllers are capable of single channel -
- * which means that memory sticks can be loaded
- * individually. Other memory controllers are only
- * capable of dual channel - which means that memory
- * sticks must be loaded as pairs (see "socket set").
- *
- * Chip-select row: All of the memory devices that are selected together.
- * for a single, minimum grain of memory access.
- * This selects all of the parallel memory devices across
- * all of the parallel channels. Common chip-select rows
- * for single channel are 64 bits, for dual channel 128
- * bits.
- *
- * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
- * Motherboards commonly drive two chip-select pins to
- * a memory stick. A single-ranked stick, will occupy
- * only one of those rows. The other will be unused.
- *
- * Double-Ranked stick: A double-ranked stick has two chip-select rows which
- * access different sets of memory devices. The two
- * rows cannot be accessed concurrently.
- *
- * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
- * A double-sided stick has two chip-select rows which
- * access different sets of memory devices. The two
- * rows cannot be accessed concurrently. "Double-sided"
- * is irrespective of the memory devices being mounted
- * on both sides of the memory stick.
- *
- * Socket set: All of the memory sticks that are required for
- * a single memory access or all of the memory sticks
- * spanned by a chip-select row. A single socket set
- * has two chip-select rows and if double-sided sticks
- * are used these will occupy those chip-select rows.
- *
- * Bank: This term is avoided because it is unclear when
- * needing to distinguish between chip-select rows and
- * socket sets.
- *
- * Controller pages:
- *
- * Physical pages:
- *
- * Virtual pages:
- *
- *
- * STRUCTURE ORGANIZATION AND CHOICES
- *
- *
- *
- * PS - I enjoyed writing all that about as much as you enjoyed reading it.
- */
-
-struct channel_info {
- int chan_idx; /* channel index */
- u32 ce_count; /* Correctable Errors for this CHANNEL */
- char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */
- struct csrow_info *csrow; /* the parent */
-};
-
-struct csrow_info {
- unsigned long first_page; /* first page number in dimm */
- unsigned long last_page; /* last page number in dimm */
- unsigned long page_mask; /* used for interleaving -
- * 0UL for non intlv
- */
- u32 nr_pages; /* number of pages in csrow */
- u32 grain; /* granularity of reported error in bytes */
- int csrow_idx; /* the chip-select row */
- enum dev_type dtype; /* memory device type */
- u32 ue_count; /* Uncorrectable Errors for this csrow */
- u32 ce_count; /* Correctable Errors for this csrow */
- enum mem_type mtype; /* memory csrow type */
- enum edac_type edac_mode; /* EDAC mode for this csrow */
- struct mem_ctl_info *mci; /* the parent */
-
- struct kobject kobj; /* sysfs kobject for this csrow */
-
- /* channel information for this csrow */
- u32 nr_channels;
- struct channel_info *channels;
-};
-
-struct mcidev_sysfs_group {
- const char *name; /* group name */
- const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
-};
-
-struct mcidev_sysfs_group_kobj {
- struct list_head list; /* list for all instances within a mc */
-
- struct kobject kobj; /* kobj for the group */
-
- const struct mcidev_sysfs_group *grp; /* group description table */
- struct mem_ctl_info *mci; /* the parent */
-};
-
-/* mcidev_sysfs_attribute structure
- * used for driver sysfs attributes and in mem_ctl_info
- * sysfs top level entries
- */
-struct mcidev_sysfs_attribute {
- /* It should use either attr or grp */
- struct attribute attr;
- const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */
-
- /* Ops for show/store values at the attribute - not used on group */
- ssize_t (*show)(struct mem_ctl_info *,char *);
- ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
-};
-
-/* MEMORY controller information structure
- */
-struct mem_ctl_info {
- struct list_head link; /* for global list of mem_ctl_info structs */
-
- struct module *owner; /* Module owner of this control struct */
-
- unsigned long mtype_cap; /* memory types supported by mc */
- unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */
- unsigned long edac_cap; /* configuration capabilities - this is
- * closely related to edac_ctl_cap. The
- * difference is that the controller may be
- * capable of s4ecd4ed which would be listed
- * in edac_ctl_cap, but if channels aren't
- * capable of s4ecd4ed then the edac_cap would
- * not have that capability.
- */
- unsigned long scrub_cap; /* chipset scrub capabilities */
- enum scrub_type scrub_mode; /* current scrub mode */
-
- /* Translates sdram memory scrub rate given in bytes/sec to the
- internal representation and configures whatever else needs
- to be configured.
- */
- int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
-
- /* Get the current sdram memory scrub rate from the internal
- representation and converts it to the closest matching
- bandwidth in bytes/sec.
- */
- int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
-
-
- /* pointer to edac checking routine */
- void (*edac_check) (struct mem_ctl_info * mci);
-
- /*
- * Remaps memory pages: controller pages to physical pages.
- * For most MC's, this will be NULL.
- */
- /* FIXME - why not send the phys page to begin with? */
- unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
- unsigned long page);
- int mc_idx;
- int nr_csrows;
- struct csrow_info *csrows;
- /*
- * FIXME - what about controllers on other busses? - IDs must be
- * unique. dev pointer should be sufficiently unique, but
- * BUS:SLOT.FUNC numbers may not be unique.
- */
- struct device *dev;
- const char *mod_name;
- const char *mod_ver;
- const char *ctl_name;
- const char *dev_name;
- char proc_name[MC_PROC_NAME_MAX_LEN + 1];
- void *pvt_info;
- u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */
- u32 ce_noinfo_count; /* Correctable Errors w/o info */
- u32 ue_count; /* Total Uncorrectable Errors for this MC */
- u32 ce_count; /* Total Correctable Errors for this MC */
- unsigned long start_time; /* mci load start time (in jiffies) */
-
- struct completion complete;
-
- /* edac sysfs device control */
- struct kobject edac_mci_kobj;
-
- /* list for all grp instances within a mc */
- struct list_head grp_kobj_list;
-
- /* Additional top controller level attributes, but specified
- * by the low level driver.
- *
- * Set by the low level driver to provide attributes at the
- * controller level, same level as 'ue_count' and 'ce_count' above.
- * An array of structures, NULL terminated
- *
- * If attributes are desired, then set to array of attributes
- * If no attributes are desired, leave NULL
- */
- const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
-
- /* work struct for this MC */
- struct delayed_work work;
-
- /* the internal state of this controller instance */
- int op_state;
-};
-
/*
* The following are the structures to provide for a generic
* or abstract 'edac_device'. This set of structures and the
diff --git a/drivers/edac/edac_mce.c b/drivers/edac/edac_mce.c
deleted file mode 100644
index 9ccdc5b..0000000
--- a/drivers/edac/edac_mce.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Provides edac interface to mcelog events
- *
- * This file may be distributed under the terms of the
- * GNU General Public License version 2.
- *
- * Copyright (c) 2009 by:
- * Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * Red Hat Inc. http://www.redhat.com
- */
-
-#include <linux/module.h>
-#include <linux/edac_mce.h>
-#include <asm/mce.h>
-
-int edac_mce_enabled;
-EXPORT_SYMBOL_GPL(edac_mce_enabled);
-
-
-/*
- * Extension interface
- */
-
-static LIST_HEAD(edac_mce_list);
-static DEFINE_MUTEX(edac_mce_lock);
-
-int edac_mce_register(struct edac_mce *edac_mce)
-{
- mutex_lock(&edac_mce_lock);
- list_add_tail(&edac_mce->list, &edac_mce_list);
- mutex_unlock(&edac_mce_lock);
- return 0;
-}
-EXPORT_SYMBOL(edac_mce_register);
-
-void edac_mce_unregister(struct edac_mce *edac_mce)
-{
- mutex_lock(&edac_mce_lock);
- list_del(&edac_mce->list);
- mutex_unlock(&edac_mce_lock);
-}
-EXPORT_SYMBOL(edac_mce_unregister);
-
-int edac_mce_parse(struct mce *mce)
-{
- struct edac_mce *edac_mce;
-
- list_for_each_entry(edac_mce, &edac_mce_list, list) {
- if (edac_mce->check_error(edac_mce->priv, mce))
- return 1;
- }
-
- /* Nobody queued the error */
- return 0;
-}
-EXPORT_SYMBOL_GPL(edac_mce_parse);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
index a76fe83..6104dba 100644
--- a/drivers/edac/i7300_edac.c
+++ b/drivers/edac/i7300_edac.c
@@ -372,7 +372,7 @@
static void i7300_process_error_global(struct mem_ctl_info *mci)
{
struct i7300_pvt *pvt;
- u32 errnum, value;
+ u32 errnum, error_reg;
unsigned long errors;
const char *specific;
bool is_fatal;
@@ -381,9 +381,9 @@
/* read in the 1st FATAL error register */
pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_HI, &value);
- if (unlikely(value)) {
- errors = value;
+ FERR_GLOBAL_HI, &error_reg);
+ if (unlikely(error_reg)) {
+ errors = error_reg;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_global_hi_name));
specific = GET_ERR_FROM_TABLE(ferr_global_hi_name, errnum);
@@ -391,15 +391,15 @@
/* Clear the error bit */
pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_HI, value);
+ FERR_GLOBAL_HI, error_reg);
goto error_global;
}
pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_LO, &value);
- if (unlikely(value)) {
- errors = value;
+ FERR_GLOBAL_LO, &error_reg);
+ if (unlikely(error_reg)) {
+ errors = error_reg;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_global_lo_name));
specific = GET_ERR_FROM_TABLE(ferr_global_lo_name, errnum);
@@ -407,7 +407,7 @@
/* Clear the error bit */
pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_LO, value);
+ FERR_GLOBAL_LO, error_reg);
goto error_global;
}
@@ -427,7 +427,7 @@
static void i7300_process_fbd_error(struct mem_ctl_info *mci)
{
struct i7300_pvt *pvt;
- u32 errnum, value;
+ u32 errnum, value, error_reg;
u16 val16;
unsigned branch, channel, bank, rank, cas, ras;
u32 syndrome;
@@ -440,14 +440,14 @@
/* read in the 1st FATAL error register */
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
- FERR_FAT_FBD, &value);
- if (unlikely(value & FERR_FAT_FBD_ERR_MASK)) {
- errors = value & FERR_FAT_FBD_ERR_MASK ;
+ FERR_FAT_FBD, &error_reg);
+ if (unlikely(error_reg & FERR_FAT_FBD_ERR_MASK)) {
+ errors = error_reg & FERR_FAT_FBD_ERR_MASK ;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_fat_fbd_name));
specific = GET_ERR_FROM_TABLE(ferr_fat_fbd_name, errnum);
+ branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
- branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
NRECMEMA, &val16);
bank = NRECMEMA_BANK(val16);
@@ -455,11 +455,14 @@
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
NRECMEMB, &value);
-
is_wr = NRECMEMB_IS_WR(value);
cas = NRECMEMB_CAS(value);
ras = NRECMEMB_RAS(value);
+ /* Clean the error register */
+ pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+ FERR_FAT_FBD, error_reg);
+
snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
"FATAL (Branch=%d DRAM-Bank=%d %s "
"RAS=%d CAS=%d Err=0x%lx (%s))",
@@ -476,21 +479,17 @@
/* read in the 1st NON-FATAL error register */
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
- FERR_NF_FBD, &value);
- if (unlikely(value & FERR_NF_FBD_ERR_MASK)) {
- errors = value & FERR_NF_FBD_ERR_MASK;
+ FERR_NF_FBD, &error_reg);
+ if (unlikely(error_reg & FERR_NF_FBD_ERR_MASK)) {
+ errors = error_reg & FERR_NF_FBD_ERR_MASK;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_nf_fbd_name));
specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
-
- /* Clear the error bit */
- pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_LO, value);
+ branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
REDMEMA, &syndrome);
- branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
RECMEMA, &val16);
bank = RECMEMA_BANK(val16);
@@ -498,18 +497,20 @@
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
RECMEMB, &value);
-
is_wr = RECMEMB_IS_WR(value);
cas = RECMEMB_CAS(value);
ras = RECMEMB_RAS(value);
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
REDMEMB, &value);
-
channel = (branch << 1);
if (IS_SECOND_CH(value))
channel++;
+ /* Clear the error bit */
+ pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+ FERR_NF_FBD, error_reg);
+
/* Form out message */
snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
"Corrected error (Branch=%d, Channel %d), "
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index f6cf448..70ad892 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -31,11 +31,13 @@
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/edac.h>
#include <linux/mmzone.h>
-#include <linux/edac_mce.h>
#include <linux/smp.h>
+#include <asm/mce.h>
#include <asm/processor.h>
+#include <asm/div64.h>
#include "edac_core.h"
@@ -78,6 +80,8 @@
/* OFFSETS for Device 0 Function 0 */
#define MC_CFG_CONTROL 0x90
+ #define MC_CFG_UNLOCK 0x02
+ #define MC_CFG_LOCK 0x00
/* OFFSETS for Device 3 Function 0 */
@@ -98,6 +102,15 @@
#define DIMM0_COR_ERR(r) ((r) & 0x7fff)
/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_SSRCONTROL 0x48
+ #define SSR_MODE_DISABLE 0x00
+ #define SSR_MODE_ENABLE 0x01
+ #define SSR_MODE_MASK 0x03
+
+#define MC_SCRUB_CONTROL 0x4c
+ #define STARTSCRUB (1 << 24)
+ #define SCRUBINTERVAL_MASK 0xffffff
+
#define MC_COR_ECC_CNT_0 0x80
#define MC_COR_ECC_CNT_1 0x84
#define MC_COR_ECC_CNT_2 0x88
@@ -253,10 +266,7 @@
unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
- unsigned int is_registered;
-
- /* mcelog glue */
- struct edac_mce edac_mce;
+ bool is_registered, enable_scrub;
/* Fifo double buffers */
struct mce mce_entry[MCE_LOG_LEN];
@@ -268,6 +278,9 @@
/* Count indicator to show errors not got */
unsigned mce_overrun;
+ /* DCLK Frequency used for computing scrub rate */
+ int dclk_freq;
+
/* Struct to control EDAC polling */
struct edac_pci_ctl_info *i7core_pci;
};
@@ -281,8 +294,7 @@
/* Memory controller */
{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
-
- /* Exists only for RDIMM */
+ /* Exists only for RDIMM */
{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
@@ -303,6 +315,16 @@
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
+
+ /* Generic Non-core registers */
+ /*
+ * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+ * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+ * the probing code needs to test for the other address in case of
+ * failure of this one
+ */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
+
};
static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
@@ -319,6 +341,12 @@
{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
+
+ /*
+ * This is the PCI device has an alternate address on some
+ * processors like Core i7 860
+ */
+ { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
};
static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
@@ -346,6 +374,10 @@
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
+
+ /* Generic Non-core registers */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
+
};
#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
@@ -714,6 +746,10 @@
csr->edac_mode = mode;
csr->mtype = mtype;
+ snprintf(csr->channels[0].label,
+ sizeof(csr->channels[0].label),
+ "CPU#%uChannel#%u_DIMM#%u",
+ pvt->i7core_dev->socket, i, j);
csrow++;
}
@@ -731,7 +767,7 @@
debugf1("\t\t%#x\t%#x\t%#x\n",
(value[j] >> 27) & 0x1,
(value[j] >> 24) & 0x7,
- (value[j] && ((1 << 24) - 1)));
+ (value[j] & ((1 << 24) - 1)));
}
return 0;
@@ -1324,6 +1360,20 @@
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
dev_descr->dev_id, *prev);
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+ * to probe for the alternate address in case of failure
+ */
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+ *prev);
+
if (!pdev) {
if (*prev) {
*prev = pdev;
@@ -1444,8 +1494,10 @@
struct i7core_pvt *pvt = mci->pvt_info;
struct pci_dev *pdev;
int i, func, slot;
+ char *family;
- pvt->is_registered = 0;
+ pvt->is_registered = false;
+ pvt->enable_scrub = false;
for (i = 0; i < i7core_dev->n_devs; i++) {
pdev = i7core_dev->pdev[i];
if (!pdev)
@@ -1461,9 +1513,37 @@
if (unlikely(func > MAX_CHAN_FUNC))
goto error;
pvt->pci_ch[slot - 4][func] = pdev;
- } else if (!slot && !func)
+ } else if (!slot && !func) {
pvt->pci_noncore = pdev;
- else
+
+ /* Detect the processor family */
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_I7_NONCORE:
+ family = "Xeon 35xx/ i7core";
+ pvt->enable_scrub = false;
+ break;
+ case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT:
+ family = "i7-800/i5-700";
+ pvt->enable_scrub = false;
+ break;
+ case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE:
+ family = "Xeon 34xx";
+ pvt->enable_scrub = false;
+ break;
+ case PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT:
+ family = "Xeon 55xx";
+ pvt->enable_scrub = true;
+ break;
+ case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2:
+ family = "Xeon 56xx / i7-900";
+ pvt->enable_scrub = true;
+ break;
+ default:
+ family = "unknown";
+ pvt->enable_scrub = false;
+ }
+ debugf0("Detected a processor type %s\n", family);
+ } else
goto error;
debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
@@ -1472,7 +1552,7 @@
if (PCI_SLOT(pdev->devfn) == 3 &&
PCI_FUNC(pdev->devfn) == 2)
- pvt->is_registered = 1;
+ pvt->is_registered = true;
}
return 0;
@@ -1826,33 +1906,43 @@
* WARNING: As this routine should be called at NMI time, extra care should
* be taken to avoid deadlocks, and to be as fast as possible.
*/
-static int i7core_mce_check_error(void *priv, struct mce *mce)
+static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
+ void *data)
{
- struct mem_ctl_info *mci = priv;
- struct i7core_pvt *pvt = mci->pvt_info;
+ struct mce *mce = (struct mce *)data;
+ struct i7core_dev *i7_dev;
+ struct mem_ctl_info *mci;
+ struct i7core_pvt *pvt;
+
+ i7_dev = get_i7core_dev(mce->socketid);
+ if (!i7_dev)
+ return NOTIFY_BAD;
+
+ mci = i7_dev->mci;
+ pvt = mci->pvt_info;
/*
* Just let mcelog handle it if the error is
* outside the memory controller
*/
if (((mce->status & 0xffff) >> 7) != 1)
- return 0;
+ return NOTIFY_DONE;
/* Bank 8 registers are the only ones that we know how to handle */
if (mce->bank != 8)
- return 0;
+ return NOTIFY_DONE;
#ifdef CONFIG_SMP
/* Only handle if it is the right mc controller */
- if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
- return 0;
+ if (mce->socketid != pvt->i7core_dev->socket)
+ return NOTIFY_DONE;
#endif
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
pvt->mce_overrun++;
- return 0;
+ return NOTIFY_DONE;
}
/* Copy memory error at the ringbuffer */
@@ -1865,7 +1955,240 @@
i7core_check_error(mci);
/* Advise mcelog that the errors were handled */
- return 1;
+ return NOTIFY_STOP;
+}
+
+static struct notifier_block i7_mce_dec = {
+ .notifier_call = i7core_mce_check_error,
+};
+
+struct memdev_dmi_entry {
+ u8 type;
+ u8 length;
+ u16 handle;
+ u16 phys_mem_array_handle;
+ u16 mem_err_info_handle;
+ u16 total_width;
+ u16 data_width;
+ u16 size;
+ u8 form;
+ u8 device_set;
+ u8 device_locator;
+ u8 bank_locator;
+ u8 memory_type;
+ u16 type_detail;
+ u16 speed;
+ u8 manufacturer;
+ u8 serial_number;
+ u8 asset_tag;
+ u8 part_number;
+ u8 attributes;
+ u32 extended_size;
+ u16 conf_mem_clk_speed;
+} __attribute__((__packed__));
+
+
+/*
+ * Decode the DRAM Clock Frequency, be paranoid, make sure that all
+ * memory devices show the same speed, and if they don't then consider
+ * all speeds to be invalid.
+ */
+static void decode_dclk(const struct dmi_header *dh, void *_dclk_freq)
+{
+ int *dclk_freq = _dclk_freq;
+ u16 dmi_mem_clk_speed;
+
+ if (*dclk_freq == -1)
+ return;
+
+ if (dh->type == DMI_ENTRY_MEM_DEVICE) {
+ struct memdev_dmi_entry *memdev_dmi_entry =
+ (struct memdev_dmi_entry *)dh;
+ unsigned long conf_mem_clk_speed_offset =
+ (unsigned long)&memdev_dmi_entry->conf_mem_clk_speed -
+ (unsigned long)&memdev_dmi_entry->type;
+ unsigned long speed_offset =
+ (unsigned long)&memdev_dmi_entry->speed -
+ (unsigned long)&memdev_dmi_entry->type;
+
+ /* Check that a DIMM is present */
+ if (memdev_dmi_entry->size == 0)
+ return;
+
+ /*
+ * Pick the configured speed if it's available, otherwise
+ * pick the DIMM speed, or we don't have a speed.
+ */
+ if (memdev_dmi_entry->length > conf_mem_clk_speed_offset) {
+ dmi_mem_clk_speed =
+ memdev_dmi_entry->conf_mem_clk_speed;
+ } else if (memdev_dmi_entry->length > speed_offset) {
+ dmi_mem_clk_speed = memdev_dmi_entry->speed;
+ } else {
+ *dclk_freq = -1;
+ return;
+ }
+
+ if (*dclk_freq == 0) {
+ /* First pass, speed was 0 */
+ if (dmi_mem_clk_speed > 0) {
+ /* Set speed if a valid speed is read */
+ *dclk_freq = dmi_mem_clk_speed;
+ } else {
+ /* Otherwise we don't have a valid speed */
+ *dclk_freq = -1;
+ }
+ } else if (*dclk_freq > 0 &&
+ *dclk_freq != dmi_mem_clk_speed) {
+ /*
+ * If we have a speed, check that all DIMMS are the same
+ * speed, otherwise set the speed as invalid.
+ */
+ *dclk_freq = -1;
+ }
+ }
+}
+
+/*
+ * The default DCLK frequency is used as a fallback if we
+ * fail to find anything reliable in the DMI. The value
+ * is taken straight from the datasheet.
+ */
+#define DEFAULT_DCLK_FREQ 800
+
+static int get_dclk_freq(void)
+{
+ int dclk_freq = 0;
+
+ dmi_walk(decode_dclk, (void *)&dclk_freq);
+
+ if (dclk_freq < 1)
+ return DEFAULT_DCLK_FREQ;
+
+ return dclk_freq;
+}
+
+/*
+ * set_sdram_scrub_rate This routine sets byte/sec bandwidth scrub rate
+ * to hardware according to SCRUBINTERVAL formula
+ * found in datasheet.
+ */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ u32 dw_scrub;
+ u32 dw_ssr;
+
+ /* Get data from the MC register, function 2 */
+ pdev = pvt->pci_mcr[2];
+ if (!pdev)
+ return -ENODEV;
+
+ pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub);
+
+ if (new_bw == 0) {
+ /* Prepare to disable petrol scrub */
+ dw_scrub &= ~STARTSCRUB;
+ /* Stop the patrol scrub engine */
+ write_and_test(pdev, MC_SCRUB_CONTROL,
+ dw_scrub & ~SCRUBINTERVAL_MASK);
+
+ /* Get current status of scrub rate and set bit to disable */
+ pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+ dw_ssr &= ~SSR_MODE_MASK;
+ dw_ssr |= SSR_MODE_DISABLE;
+ } else {
+ const int cache_line_size = 64;
+ const u32 freq_dclk_mhz = pvt->dclk_freq;
+ unsigned long long scrub_interval;
+ /*
+ * Translate the desired scrub rate to a register value and
+ * program the corresponding register value.
+ */
+ scrub_interval = (unsigned long long)freq_dclk_mhz *
+ cache_line_size * 1000000;
+ do_div(scrub_interval, new_bw);
+
+ if (!scrub_interval || scrub_interval > SCRUBINTERVAL_MASK)
+ return -EINVAL;
+
+ dw_scrub = SCRUBINTERVAL_MASK & scrub_interval;
+
+ /* Start the patrol scrub engine */
+ pci_write_config_dword(pdev, MC_SCRUB_CONTROL,
+ STARTSCRUB | dw_scrub);
+
+ /* Get current status of scrub rate and set bit to enable */
+ pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+ dw_ssr &= ~SSR_MODE_MASK;
+ dw_ssr |= SSR_MODE_ENABLE;
+ }
+ /* Disable or enable scrubbing */
+ pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr);
+
+ return new_bw;
+}
+
+/*
+ * get_sdram_scrub_rate This routine convert current scrub rate value
+ * into byte/sec bandwidth accourding to
+ * SCRUBINTERVAL formula found in datasheet.
+ */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ const u32 cache_line_size = 64;
+ const u32 freq_dclk_mhz = pvt->dclk_freq;
+ unsigned long long scrub_rate;
+ u32 scrubval;
+
+ /* Get data from the MC register, function 2 */
+ pdev = pvt->pci_mcr[2];
+ if (!pdev)
+ return -ENODEV;
+
+ /* Get current scrub control data */
+ pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval);
+
+ /* Mask highest 8-bits to 0 */
+ scrubval &= SCRUBINTERVAL_MASK;
+ if (!scrubval)
+ return 0;
+
+ /* Calculate scrub rate value into byte/sec bandwidth */
+ scrub_rate = (unsigned long long)freq_dclk_mhz *
+ 1000000 * cache_line_size;
+ do_div(scrub_rate, scrubval);
+ return (int)scrub_rate;
+}
+
+static void enable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 pci_lock;
+
+ /* Unlock writes to pci registers */
+ pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+ pci_lock &= ~0x3;
+ pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+ pci_lock | MC_CFG_UNLOCK);
+
+ mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+ mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
+}
+
+static void disable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 pci_lock;
+
+ /* Lock writes to pci registers */
+ pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+ pci_lock &= ~0x3;
+ pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+ pci_lock | MC_CFG_LOCK);
}
static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
@@ -1874,7 +2197,8 @@
&pvt->i7core_dev->pdev[0]->dev,
EDAC_MOD_STR);
if (unlikely(!pvt->i7core_pci))
- pr_warn("Unable to setup PCI error report via EDAC\n");
+ i7core_printk(KERN_WARNING,
+ "Unable to setup PCI error report via EDAC\n");
}
static void i7core_pci_ctl_release(struct i7core_pvt *pvt)
@@ -1906,8 +2230,11 @@
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &i7core_dev->pdev[0]->dev);
- /* Disable MCE NMI handler */
- edac_mce_unregister(&pvt->edac_mce);
+ /* Disable scrubrate setting */
+ if (pvt->enable_scrub)
+ disable_sdram_scrub_setting(mci);
+
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &i7_mce_dec);
/* Disable EDAC polling */
i7core_pci_ctl_release(pvt);
@@ -1979,6 +2306,10 @@
/* Set the function pointer to an actual operation function */
mci->edac_check = i7core_check_error;
+ /* Enable scrubrate setting */
+ if (pvt->enable_scrub)
+ enable_sdram_scrub_setting(mci);
+
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
debugf0("MC: " __FILE__
@@ -2002,21 +2333,13 @@
/* allocating generic PCI control info */
i7core_pci_ctl_create(pvt);
- /* Registers on edac_mce in order to receive memory errors */
- pvt->edac_mce.priv = mci;
- pvt->edac_mce.check_error = i7core_mce_check_error;
- rc = edac_mce_register(&pvt->edac_mce);
- if (unlikely(rc < 0)) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mce_register()\n", __func__);
- goto fail1;
- }
+ /* DCLK for scrub rate setting */
+ pvt->dclk_freq = get_dclk_freq();
+
+ atomic_notifier_chain_register(&x86_mce_decoder_chain, &i7_mce_dec);
return 0;
-fail1:
- i7core_pci_ctl_release(pvt);
- edac_mc_del_mc(mci->dev);
fail0:
kfree(mci->ctl_name);
edac_mc_free(mci);
@@ -2035,7 +2358,7 @@
static int __devinit i7core_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- int rc;
+ int rc, count = 0;
struct i7core_dev *i7core_dev;
/* get the pci devices we want to reserve for our use */
@@ -2055,12 +2378,28 @@
goto fail0;
list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ count++;
rc = i7core_register_mci(i7core_dev);
if (unlikely(rc < 0))
goto fail1;
}
- i7core_printk(KERN_INFO, "Driver loaded.\n");
+ /*
+ * Nehalem-EX uses a different memory controller. However, as the
+ * memory controller is not visible on some Nehalem/Nehalem-EP, we
+ * need to indirectly probe via a X58 PCI device. The same devices
+ * are found on (some) Nehalem-EX. So, on those machines, the
+ * probe routine needs to return -ENODEV, as the actual Memory
+ * Controller registers won't be detected.
+ */
+ if (!count) {
+ rc = -ENODEV;
+ goto fail1;
+ }
+
+ i7core_printk(KERN_INFO,
+ "Driver loaded, %d memory controller(s) found.\n",
+ count);
mutex_unlock(&i7core_edac_lock);
return 0;
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 795cfbc..d0864d9 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -9,7 +9,7 @@
static u8 nb_err_cpumask = 0xf;
static bool report_gart_errors;
-static void (*nb_bus_decoder)(int node_id, struct mce *m, u32 nbcfg);
+static void (*nb_bus_decoder)(int node_id, struct mce *m);
void amd_report_gart_errors(bool v)
{
@@ -17,13 +17,13 @@
}
EXPORT_SYMBOL_GPL(amd_report_gart_errors);
-void amd_register_ecc_decoder(void (*f)(int, struct mce *, u32))
+void amd_register_ecc_decoder(void (*f)(int, struct mce *))
{
nb_bus_decoder = f;
}
EXPORT_SYMBOL_GPL(amd_register_ecc_decoder);
-void amd_unregister_ecc_decoder(void (*f)(int, struct mce *, u32))
+void amd_unregister_ecc_decoder(void (*f)(int, struct mce *))
{
if (nb_bus_decoder) {
WARN_ON(nb_bus_decoder != f);
@@ -592,31 +592,14 @@
return false;
}
-void amd_decode_nb_mce(int node_id, struct mce *m, u32 nbcfg)
+void amd_decode_nb_mce(struct mce *m)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
- u16 ec = EC(m->status);
- u8 xec = XEC(m->status, 0x1f);
- u32 nbsh = (u32)(m->status >> 32);
- int core = -1;
+ int node_id = amd_get_nb_id(m->extcpu);
+ u16 ec = EC(m->status);
+ u8 xec = XEC(m->status, 0x1f);
- pr_emerg(HW_ERR "Northbridge Error (node %d", node_id);
-
- /* F10h, revD can disable ErrCpu[3:0] through ErrCpuVal */
- if (c->x86 == 0x10 && c->x86_model > 7) {
- if (nbsh & NBSH_ERR_CPU_VAL)
- core = nbsh & nb_err_cpumask;
- } else {
- u8 assoc_cpus = nbsh & nb_err_cpumask;
-
- if (assoc_cpus > 0)
- core = fls(assoc_cpus) - 1;
- }
-
- if (core >= 0)
- pr_cont(", core %d): ", core);
- else
- pr_cont("): ");
+ pr_emerg(HW_ERR "Northbridge Error (node %d): ", node_id);
switch (xec) {
case 0x2:
@@ -648,7 +631,7 @@
if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x15)
if ((xec == 0x8 || xec == 0x0) && nb_bus_decoder)
- nb_bus_decoder(node_id, m, nbcfg);
+ nb_bus_decoder(node_id, m);
return;
@@ -764,13 +747,13 @@
{
struct mce *m = (struct mce *)data;
struct cpuinfo_x86 *c = &boot_cpu_data;
- int node, ecc;
+ int ecc;
if (amd_filter_mce(m))
return NOTIFY_STOP;
- pr_emerg(HW_ERR "MC%d_STATUS[%s|%s|%s|%s|%s",
- m->bank,
+ pr_emerg(HW_ERR "CPU:%d\tMC%d_STATUS[%s|%s|%s|%s|%s",
+ m->extcpu, m->bank,
((m->status & MCI_STATUS_OVER) ? "Over" : "-"),
((m->status & MCI_STATUS_UC) ? "UE" : "CE"),
((m->status & MCI_STATUS_MISCV) ? "MiscV" : "-"),
@@ -789,6 +772,8 @@
pr_cont("]: 0x%016llx\n", m->status);
+ if (m->status & MCI_STATUS_ADDRV)
+ pr_emerg(HW_ERR "\tMC%d_ADDR: 0x%016llx\n", m->bank, m->addr);
switch (m->bank) {
case 0:
@@ -811,8 +796,7 @@
break;
case 4:
- node = amd_get_nb_id(m->extcpu);
- amd_decode_nb_mce(node, m, 0);
+ amd_decode_nb_mce(m);
break;
case 5:
diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h
index 795a320..0106747 100644
--- a/drivers/edac/mce_amd.h
+++ b/drivers/edac/mce_amd.h
@@ -86,9 +86,9 @@
};
void amd_report_gart_errors(bool);
-void amd_register_ecc_decoder(void (*f)(int, struct mce *, u32));
-void amd_unregister_ecc_decoder(void (*f)(int, struct mce *, u32));
-void amd_decode_nb_mce(int, struct mce *, u32);
+void amd_register_ecc_decoder(void (*f)(int, struct mce *));
+void amd_unregister_ecc_decoder(void (*f)(int, struct mce *));
+void amd_decode_nb_mce(struct mce *);
int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data);
#endif /* _EDAC_MCE_AMD_H */
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
new file mode 100644
index 0000000..7a402bf
--- /dev/null
+++ b/drivers/edac/sb_edac.c
@@ -0,0 +1,1893 @@
+/* Intel Sandy Bridge -EN/-EP/-EX Memory Controller kernel module
+ *
+ * This driver supports the memory controllers found on the Intel
+ * processor family Sandy Bridge.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2011 by:
+ * Mauro Carvalho Chehab <mchehab@redhat.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_core.h"
+
+/* Static vars */
+static LIST_HEAD(sbridge_edac_list);
+static DEFINE_MUTEX(sbridge_edac_lock);
+static int probed;
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define SBRIDGE_REVISION " Ver: 1.0.0 "
+#define EDAC_MOD_STR "sbridge_edac"
+
+/*
+ * Debug macros
+ */
+#define sbridge_printk(level, fmt, arg...) \
+ edac_printk(level, "sbridge", fmt, ##arg)
+
+#define sbridge_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "sbridge", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi) \
+ (((v) & ((1ULL << ((hi) - (lo) + 1)) - 1) << (lo)) >> (lo))
+
+/*
+ * sbridge Memory Controller Registers
+ */
+
+/*
+ * FIXME: For now, let's order by device function, as it makes
+ * easier for driver's development proccess. This table should be
+ * moved to pci_id.h when submitted upstream
+ */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0 0x3cf4 /* 12.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1 0x3cf6 /* 12.7 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_BR 0x3cf5 /* 13.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0 0x3ca0 /* 14.0 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA 0x3ca8 /* 15.0 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS 0x3c71 /* 15.1 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0 0x3caa /* 15.2 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1 0x3cab /* 15.3 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2 0x3cac /* 15.4 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3 0x3cad /* 15.5 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO 0x3cb8 /* 17.0 */
+
+ /*
+ * Currently, unused, but will be needed in the future
+ * implementations, as they hold the error counters
+ */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR0 0x3c72 /* 16.2 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR1 0x3c73 /* 16.3 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR2 0x3c76 /* 16.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR3 0x3c77 /* 16.7 */
+
+/* Devices 12 Function 6, Offsets 0x80 to 0xcc */
+static const u32 dram_rule[] = {
+ 0x80, 0x88, 0x90, 0x98, 0xa0,
+ 0xa8, 0xb0, 0xb8, 0xc0, 0xc8,
+};
+#define MAX_SAD ARRAY_SIZE(dram_rule)
+
+#define SAD_LIMIT(reg) ((GET_BITFIELD(reg, 6, 25) << 26) | 0x3ffffff)
+#define DRAM_ATTR(reg) GET_BITFIELD(reg, 2, 3)
+#define INTERLEAVE_MODE(reg) GET_BITFIELD(reg, 1, 1)
+#define DRAM_RULE_ENABLE(reg) GET_BITFIELD(reg, 0, 0)
+
+static char *get_dram_attr(u32 reg)
+{
+ switch(DRAM_ATTR(reg)) {
+ case 0:
+ return "DRAM";
+ case 1:
+ return "MMCFG";
+ case 2:
+ return "NXM";
+ default:
+ return "unknown";
+ }
+}
+
+static const u32 interleave_list[] = {
+ 0x84, 0x8c, 0x94, 0x9c, 0xa4,
+ 0xac, 0xb4, 0xbc, 0xc4, 0xcc,
+};
+#define MAX_INTERLEAVE ARRAY_SIZE(interleave_list)
+
+#define SAD_PKG0(reg) GET_BITFIELD(reg, 0, 2)
+#define SAD_PKG1(reg) GET_BITFIELD(reg, 3, 5)
+#define SAD_PKG2(reg) GET_BITFIELD(reg, 8, 10)
+#define SAD_PKG3(reg) GET_BITFIELD(reg, 11, 13)
+#define SAD_PKG4(reg) GET_BITFIELD(reg, 16, 18)
+#define SAD_PKG5(reg) GET_BITFIELD(reg, 19, 21)
+#define SAD_PKG6(reg) GET_BITFIELD(reg, 24, 26)
+#define SAD_PKG7(reg) GET_BITFIELD(reg, 27, 29)
+
+static inline int sad_pkg(u32 reg, int interleave)
+{
+ switch (interleave) {
+ case 0:
+ return SAD_PKG0(reg);
+ case 1:
+ return SAD_PKG1(reg);
+ case 2:
+ return SAD_PKG2(reg);
+ case 3:
+ return SAD_PKG3(reg);
+ case 4:
+ return SAD_PKG4(reg);
+ case 5:
+ return SAD_PKG5(reg);
+ case 6:
+ return SAD_PKG6(reg);
+ case 7:
+ return SAD_PKG7(reg);
+ default:
+ return -EINVAL;
+ }
+}
+
+/* Devices 12 Function 7 */
+
+#define TOLM 0x80
+#define TOHM 0x84
+
+#define GET_TOLM(reg) ((GET_BITFIELD(reg, 0, 3) << 28) | 0x3ffffff)
+#define GET_TOHM(reg) ((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff)
+
+/* Device 13 Function 6 */
+
+#define SAD_TARGET 0xf0
+
+#define SOURCE_ID(reg) GET_BITFIELD(reg, 9, 11)
+
+#define SAD_CONTROL 0xf4
+
+#define NODE_ID(reg) GET_BITFIELD(reg, 0, 2)
+
+/* Device 14 function 0 */
+
+static const u32 tad_dram_rule[] = {
+ 0x40, 0x44, 0x48, 0x4c,
+ 0x50, 0x54, 0x58, 0x5c,
+ 0x60, 0x64, 0x68, 0x6c,
+};
+#define MAX_TAD ARRAY_SIZE(tad_dram_rule)
+
+#define TAD_LIMIT(reg) ((GET_BITFIELD(reg, 12, 31) << 26) | 0x3ffffff)
+#define TAD_SOCK(reg) GET_BITFIELD(reg, 10, 11)
+#define TAD_CH(reg) GET_BITFIELD(reg, 8, 9)
+#define TAD_TGT3(reg) GET_BITFIELD(reg, 6, 7)
+#define TAD_TGT2(reg) GET_BITFIELD(reg, 4, 5)
+#define TAD_TGT1(reg) GET_BITFIELD(reg, 2, 3)
+#define TAD_TGT0(reg) GET_BITFIELD(reg, 0, 1)
+
+/* Device 15, function 0 */
+
+#define MCMTR 0x7c
+
+#define IS_ECC_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 2, 2)
+#define IS_LOCKSTEP_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 1, 1)
+#define IS_CLOSE_PG(mcmtr) GET_BITFIELD(mcmtr, 0, 0)
+
+/* Device 15, function 1 */
+
+#define RASENABLES 0xac
+#define IS_MIRROR_ENABLED(reg) GET_BITFIELD(reg, 0, 0)
+
+/* Device 15, functions 2-5 */
+
+static const int mtr_regs[] = {
+ 0x80, 0x84, 0x88,
+};
+
+#define RANK_DISABLE(mtr) GET_BITFIELD(mtr, 16, 19)
+#define IS_DIMM_PRESENT(mtr) GET_BITFIELD(mtr, 14, 14)
+#define RANK_CNT_BITS(mtr) GET_BITFIELD(mtr, 12, 13)
+#define RANK_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 2, 4)
+#define COL_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 0, 1)
+
+static const u32 tad_ch_nilv_offset[] = {
+ 0x90, 0x94, 0x98, 0x9c,
+ 0xa0, 0xa4, 0xa8, 0xac,
+ 0xb0, 0xb4, 0xb8, 0xbc,
+};
+#define CHN_IDX_OFFSET(reg) GET_BITFIELD(reg, 28, 29)
+#define TAD_OFFSET(reg) (GET_BITFIELD(reg, 6, 25) << 26)
+
+static const u32 rir_way_limit[] = {
+ 0x108, 0x10c, 0x110, 0x114, 0x118,
+};
+#define MAX_RIR_RANGES ARRAY_SIZE(rir_way_limit)
+
+#define IS_RIR_VALID(reg) GET_BITFIELD(reg, 31, 31)
+#define RIR_WAY(reg) GET_BITFIELD(reg, 28, 29)
+#define RIR_LIMIT(reg) ((GET_BITFIELD(reg, 1, 10) << 29)| 0x1fffffff)
+
+#define MAX_RIR_WAY 8
+
+static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = {
+ { 0x120, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c },
+ { 0x140, 0x144, 0x148, 0x14c, 0x150, 0x154, 0x158, 0x15c },
+ { 0x160, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c },
+ { 0x180, 0x184, 0x188, 0x18c, 0x190, 0x194, 0x198, 0x19c },
+ { 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc },
+};
+
+#define RIR_RNK_TGT(reg) GET_BITFIELD(reg, 16, 19)
+#define RIR_OFFSET(reg) GET_BITFIELD(reg, 2, 14)
+
+/* Device 16, functions 2-7 */
+
+/*
+ * FIXME: Implement the error count reads directly
+ */
+
+static const u32 correrrcnt[] = {
+ 0x104, 0x108, 0x10c, 0x110,
+};
+
+#define RANK_ODD_OV(reg) GET_BITFIELD(reg, 31, 31)
+#define RANK_ODD_ERR_CNT(reg) GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_OV(reg) GET_BITFIELD(reg, 15, 15)
+#define RANK_EVEN_ERR_CNT(reg) GET_BITFIELD(reg, 0, 14)
+
+static const u32 correrrthrsld[] = {
+ 0x11c, 0x120, 0x124, 0x128,
+};
+
+#define RANK_ODD_ERR_THRSLD(reg) GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_ERR_THRSLD(reg) GET_BITFIELD(reg, 0, 14)
+
+
+/* Device 17, function 0 */
+
+#define RANK_CFG_A 0x0328
+
+#define IS_RDIMM_ENABLED(reg) GET_BITFIELD(reg, 11, 11)
+
+/*
+ * sbridge structs
+ */
+
+#define NUM_CHANNELS 4
+#define MAX_DIMMS 3 /* Max DIMMS per channel */
+
+struct sbridge_info {
+ u32 mcmtr;
+};
+
+struct sbridge_channel {
+ u32 ranks;
+ u32 dimms;
+};
+
+struct pci_id_descr {
+ int dev;
+ int func;
+ int dev_id;
+ int optional;
+};
+
+struct pci_id_table {
+ const struct pci_id_descr *descr;
+ int n_devs;
+};
+
+struct sbridge_dev {
+ struct list_head list;
+ u8 bus, mc;
+ u8 node_id, source_id;
+ struct pci_dev **pdev;
+ int n_devs;
+ struct mem_ctl_info *mci;
+};
+
+struct sbridge_pvt {
+ struct pci_dev *pci_ta, *pci_ddrio, *pci_ras;
+ struct pci_dev *pci_sad0, *pci_sad1, *pci_ha0;
+ struct pci_dev *pci_br;
+ struct pci_dev *pci_tad[NUM_CHANNELS];
+
+ struct sbridge_dev *sbridge_dev;
+
+ struct sbridge_info info;
+ struct sbridge_channel channel[NUM_CHANNELS];
+
+ int csrow_map[NUM_CHANNELS][MAX_DIMMS];
+
+ /* Memory type detection */
+ bool is_mirrored, is_lockstep, is_close_pg;
+
+ /* Fifo double buffers */
+ struct mce mce_entry[MCE_LOG_LEN];
+ struct mce mce_outentry[MCE_LOG_LEN];
+
+ /* Fifo in/out counters */
+ unsigned mce_in, mce_out;
+
+ /* Count indicator to show errors not got */
+ unsigned mce_overrun;
+
+ /* Memory description */
+ u64 tolm, tohm;
+};
+
+#define PCI_DESCR(device, function, device_id) \
+ .dev = (device), \
+ .func = (function), \
+ .dev_id = (device_id)
+
+static const struct pci_id_descr pci_dev_descr_sbridge[] = {
+ /* Processor Home Agent */
+ { PCI_DESCR(14, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0) },
+
+ /* Memory controller */
+ { PCI_DESCR(15, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA) },
+ { PCI_DESCR(15, 1, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS) },
+ { PCI_DESCR(15, 2, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0) },
+ { PCI_DESCR(15, 3, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1) },
+ { PCI_DESCR(15, 4, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2) },
+ { PCI_DESCR(15, 5, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3) },
+ { PCI_DESCR(17, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO) },
+
+ /* System Address Decoder */
+ { PCI_DESCR(12, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0) },
+ { PCI_DESCR(12, 7, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1) },
+
+ /* Broadcast Registers */
+ { PCI_DESCR(13, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_BR) },
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
+static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge),
+ {0,} /* 0 terminated list. */
+};
+
+/*
+ * pci_device_id table for which devices we are looking for
+ */
+static const struct pci_device_id sbridge_pci_tbl[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA)},
+ {0,} /* 0 terminated list. */
+};
+
+
+/****************************************************************************
+ Anciliary status routines
+ ****************************************************************************/
+
+static inline int numrank(u32 mtr)
+{
+ int ranks = (1 << RANK_CNT_BITS(mtr));
+
+ if (ranks > 4) {
+ debugf0("Invalid number of ranks: %d (max = 4) raw value = %x (%04x)",
+ ranks, (unsigned int)RANK_CNT_BITS(mtr), mtr);
+ return -EINVAL;
+ }
+
+ return ranks;
+}
+
+static inline int numrow(u32 mtr)
+{
+ int rows = (RANK_WIDTH_BITS(mtr) + 12);
+
+ if (rows < 13 || rows > 18) {
+ debugf0("Invalid number of rows: %d (should be between 14 and 17) raw value = %x (%04x)",
+ rows, (unsigned int)RANK_WIDTH_BITS(mtr), mtr);
+ return -EINVAL;
+ }
+
+ return 1 << rows;
+}
+
+static inline int numcol(u32 mtr)
+{
+ int cols = (COL_WIDTH_BITS(mtr) + 10);
+
+ if (cols > 12) {
+ debugf0("Invalid number of cols: %d (max = 4) raw value = %x (%04x)",
+ cols, (unsigned int)COL_WIDTH_BITS(mtr), mtr);
+ return -EINVAL;
+ }
+
+ return 1 << cols;
+}
+
+static struct sbridge_dev *get_sbridge_dev(u8 bus)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+ if (sbridge_dev->bus == bus)
+ return sbridge_dev;
+ }
+
+ return NULL;
+}
+
+static struct sbridge_dev *alloc_sbridge_dev(u8 bus,
+ const struct pci_id_table *table)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ sbridge_dev = kzalloc(sizeof(*sbridge_dev), GFP_KERNEL);
+ if (!sbridge_dev)
+ return NULL;
+
+ sbridge_dev->pdev = kzalloc(sizeof(*sbridge_dev->pdev) * table->n_devs,
+ GFP_KERNEL);
+ if (!sbridge_dev->pdev) {
+ kfree(sbridge_dev);
+ return NULL;
+ }
+
+ sbridge_dev->bus = bus;
+ sbridge_dev->n_devs = table->n_devs;
+ list_add_tail(&sbridge_dev->list, &sbridge_edac_list);
+
+ return sbridge_dev;
+}
+
+static void free_sbridge_dev(struct sbridge_dev *sbridge_dev)
+{
+ list_del(&sbridge_dev->list);
+ kfree(sbridge_dev->pdev);
+ kfree(sbridge_dev);
+}
+
+/****************************************************************************
+ Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 bus, unsigned slot,
+ unsigned func)
+{
+ struct sbridge_dev *sbridge_dev = get_sbridge_dev(bus);
+ int i;
+
+ if (!sbridge_dev)
+ return NULL;
+
+ for (i = 0; i < sbridge_dev->n_devs; i++) {
+ if (!sbridge_dev->pdev[i])
+ continue;
+
+ if (PCI_SLOT(sbridge_dev->pdev[i]->devfn) == slot &&
+ PCI_FUNC(sbridge_dev->pdev[i]->devfn) == func) {
+ debugf1("Associated %02x.%02x.%d with %p\n",
+ bus, slot, func, sbridge_dev->pdev[i]);
+ return sbridge_dev->pdev[i];
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * sbridge_get_active_channels() - gets the number of channels and csrows
+ * bus: Device bus
+ * @channels: Number of channels that will be returned
+ * @csrows: Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket, identified
+ * by the associated PCI bus.
+ * this is used in order to properly allocate the size of mci components.
+ * Note: one csrow is one dimm.
+ */
+static int sbridge_get_active_channels(const u8 bus, unsigned *channels,
+ unsigned *csrows)
+{
+ struct pci_dev *pdev = NULL;
+ int i, j;
+ u32 mcmtr;
+
+ *channels = 0;
+ *csrows = 0;
+
+ pdev = get_pdev_slot_func(bus, 15, 0);
+ if (!pdev) {
+ sbridge_printk(KERN_ERR, "Couldn't find PCI device "
+ "%2x.%02d.%d!!!\n",
+ bus, 15, 0);
+ return -ENODEV;
+ }
+
+ pci_read_config_dword(pdev, MCMTR, &mcmtr);
+ if (!IS_ECC_ENABLED(mcmtr)) {
+ sbridge_printk(KERN_ERR, "ECC is disabled. Aborting\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ u32 mtr;
+
+ /* Device 15 functions 2 - 5 */
+ pdev = get_pdev_slot_func(bus, 15, 2 + i);
+ if (!pdev) {
+ sbridge_printk(KERN_ERR, "Couldn't find PCI device "
+ "%2x.%02d.%d!!!\n",
+ bus, 15, 2 + i);
+ return -ENODEV;
+ }
+ (*channels)++;
+
+ for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
+ pci_read_config_dword(pdev, mtr_regs[j], &mtr);
+ debugf1("Bus#%02x channel #%d MTR%d = %x\n", bus, i, j, mtr);
+ if (IS_DIMM_PRESENT(mtr))
+ (*csrows)++;
+ }
+ }
+
+ debugf0("Number of active channels: %d, number of active dimms: %d\n",
+ *channels, *csrows);
+
+ return 0;
+}
+
+static int get_dimm_config(const struct mem_ctl_info *mci)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ struct csrow_info *csr;
+ int i, j, banks, ranks, rows, cols, size, npages;
+ int csrow = 0;
+ unsigned long last_page = 0;
+ u32 reg;
+ enum edac_type mode;
+ enum mem_type mtype;
+
+ pci_read_config_dword(pvt->pci_br, SAD_TARGET, ®);
+ pvt->sbridge_dev->source_id = SOURCE_ID(reg);
+
+ pci_read_config_dword(pvt->pci_br, SAD_CONTROL, ®);
+ pvt->sbridge_dev->node_id = NODE_ID(reg);
+ debugf0("mc#%d: Node ID: %d, source ID: %d\n",
+ pvt->sbridge_dev->mc,
+ pvt->sbridge_dev->node_id,
+ pvt->sbridge_dev->source_id);
+
+ pci_read_config_dword(pvt->pci_ras, RASENABLES, ®);
+ if (IS_MIRROR_ENABLED(reg)) {
+ debugf0("Memory mirror is enabled\n");
+ pvt->is_mirrored = true;
+ } else {
+ debugf0("Memory mirror is disabled\n");
+ pvt->is_mirrored = false;
+ }
+
+ pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr);
+ if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) {
+ debugf0("Lockstep is enabled\n");
+ mode = EDAC_S8ECD8ED;
+ pvt->is_lockstep = true;
+ } else {
+ debugf0("Lockstep is disabled\n");
+ mode = EDAC_S4ECD4ED;
+ pvt->is_lockstep = false;
+ }
+ if (IS_CLOSE_PG(pvt->info.mcmtr)) {
+ debugf0("address map is on closed page mode\n");
+ pvt->is_close_pg = true;
+ } else {
+ debugf0("address map is on open page mode\n");
+ pvt->is_close_pg = false;
+ }
+
+ pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®);
+ if (IS_RDIMM_ENABLED(reg)) {
+ /* FIXME: Can also be LRDIMM */
+ debugf0("Memory is registered\n");
+ mtype = MEM_RDDR3;
+ } else {
+ debugf0("Memory is unregistered\n");
+ mtype = MEM_DDR3;
+ }
+
+ /* On all supported DDR3 DIMM types, there are 8 banks available */
+ banks = 8;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ u32 mtr;
+
+ for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ mtr_regs[j], &mtr);
+ debugf4("Channel #%d MTR%d = %x\n", i, j, mtr);
+ if (IS_DIMM_PRESENT(mtr)) {
+ pvt->channel[i].dimms++;
+
+ ranks = numrank(mtr);
+ rows = numrow(mtr);
+ cols = numcol(mtr);
+
+ /* DDR3 has 8 I/O banks */
+ size = (rows * cols * banks * ranks) >> (20 - 3);
+ npages = MiB_TO_PAGES(size);
+
+ debugf0("mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+ pvt->sbridge_dev->mc, i, j,
+ size, npages,
+ banks, ranks, rows, cols);
+ csr = &mci->csrows[csrow];
+
+ csr->first_page = last_page;
+ csr->last_page = last_page + npages - 1;
+ csr->page_mask = 0UL; /* Unused */
+ csr->nr_pages = npages;
+ csr->grain = 32;
+ csr->csrow_idx = csrow;
+ csr->dtype = (banks == 8) ? DEV_X8 : DEV_X4;
+ csr->ce_count = 0;
+ csr->ue_count = 0;
+ csr->mtype = mtype;
+ csr->edac_mode = mode;
+ csr->nr_channels = 1;
+ csr->channels[0].chan_idx = i;
+ csr->channels[0].ce_count = 0;
+ pvt->csrow_map[i][j] = csrow;
+ snprintf(csr->channels[0].label,
+ sizeof(csr->channels[0].label),
+ "CPU_SrcID#%u_Channel#%u_DIMM#%u",
+ pvt->sbridge_dev->source_id, i, j);
+ last_page += npages;
+ csrow++;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void get_memory_layout(const struct mem_ctl_info *mci)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ int i, j, k, n_sads, n_tads, sad_interl;
+ u32 reg;
+ u64 limit, prv = 0;
+ u64 tmp_mb;
+ u32 rir_way;
+
+ /*
+ * Step 1) Get TOLM/TOHM ranges
+ */
+
+ /* Address range is 32:28 */
+ pci_read_config_dword(pvt->pci_sad1, TOLM,
+ ®);
+ pvt->tolm = GET_TOLM(reg);
+ tmp_mb = (1 + pvt->tolm) >> 20;
+
+ debugf0("TOLM: %Lu.%03Lu GB (0x%016Lx)\n",
+ tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tolm);
+
+ /* Address range is already 45:25 */
+ pci_read_config_dword(pvt->pci_sad1, TOHM,
+ ®);
+ pvt->tohm = GET_TOHM(reg);
+ tmp_mb = (1 + pvt->tohm) >> 20;
+
+ debugf0("TOHM: %Lu.%03Lu GB (0x%016Lx)",
+ tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tohm);
+
+ /*
+ * Step 2) Get SAD range and SAD Interleave list
+ * TAD registers contain the interleave wayness. However, it
+ * seems simpler to just discover it indirectly, with the
+ * algorithm bellow.
+ */
+ prv = 0;
+ for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
+ /* SAD_LIMIT Address range is 45:26 */
+ pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
+ ®);
+ limit = SAD_LIMIT(reg);
+
+ if (!DRAM_RULE_ENABLE(reg))
+ continue;
+
+ if (limit <= prv)
+ break;
+
+ tmp_mb = (limit + 1) >> 20;
+ debugf0("SAD#%d %s up to %Lu.%03Lu GB (0x%016Lx) %s reg=0x%08x\n",
+ n_sads,
+ get_dram_attr(reg),
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
+ reg);
+ prv = limit;
+
+ pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
+ ®);
+ sad_interl = sad_pkg(reg, 0);
+ for (j = 0; j < 8; j++) {
+ if (j > 0 && sad_interl == sad_pkg(reg, j))
+ break;
+
+ debugf0("SAD#%d, interleave #%d: %d\n",
+ n_sads, j, sad_pkg(reg, j));
+ }
+ }
+
+ /*
+ * Step 3) Get TAD range
+ */
+ prv = 0;
+ for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+ pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
+ ®);
+ limit = TAD_LIMIT(reg);
+ if (limit <= prv)
+ break;
+ tmp_mb = (limit + 1) >> 20;
+
+ debugf0("TAD#%d: up to %Lu.%03Lu GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
+ n_tads, tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ (u32)TAD_SOCK(reg),
+ (u32)TAD_CH(reg),
+ (u32)TAD_TGT0(reg),
+ (u32)TAD_TGT1(reg),
+ (u32)TAD_TGT2(reg),
+ (u32)TAD_TGT3(reg),
+ reg);
+ prv = tmp_mb;
+ }
+
+ /*
+ * Step 4) Get TAD offsets, per each channel
+ */
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (!pvt->channel[i].dimms)
+ continue;
+ for (j = 0; j < n_tads; j++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ tad_ch_nilv_offset[j],
+ ®);
+ tmp_mb = TAD_OFFSET(reg) >> 20;
+ debugf0("TAD CH#%d, offset #%d: %Lu.%03Lu GB (0x%016Lx), reg=0x%08x\n",
+ i, j,
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ reg);
+ }
+ }
+
+ /*
+ * Step 6) Get RIR Wayness/Limit, per each channel
+ */
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (!pvt->channel[i].dimms)
+ continue;
+ for (j = 0; j < MAX_RIR_RANGES; j++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ rir_way_limit[j],
+ ®);
+
+ if (!IS_RIR_VALID(reg))
+ continue;
+
+ tmp_mb = RIR_LIMIT(reg) >> 20;
+ rir_way = 1 << RIR_WAY(reg);
+ debugf0("CH#%d RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d, reg=0x%08x\n",
+ i, j,
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ rir_way,
+ reg);
+
+ for (k = 0; k < rir_way; k++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ rir_offset[j][k],
+ ®);
+ tmp_mb = RIR_OFFSET(reg) << 6;
+
+ debugf0("CH#%d RIR#%d INTL#%d, offset %Lu.%03Lu GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
+ i, j, k,
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ (u32)RIR_RNK_TGT(reg),
+ reg);
+ }
+ }
+ }
+}
+
+struct mem_ctl_info *get_mci_for_node_id(u8 node_id)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+ if (sbridge_dev->node_id == node_id)
+ return sbridge_dev->mci;
+ }
+ return NULL;
+}
+
+static int get_memory_error_data(struct mem_ctl_info *mci,
+ u64 addr,
+ u8 *socket,
+ long *channel_mask,
+ u8 *rank,
+ char *area_type)
+{
+ struct mem_ctl_info *new_mci;
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ char msg[256];
+ int n_rir, n_sads, n_tads, sad_way, sck_xch;
+ int sad_interl, idx, base_ch;
+ int interleave_mode;
+ unsigned sad_interleave[MAX_INTERLEAVE];
+ u32 reg;
+ u8 ch_way,sck_way;
+ u32 tad_offset;
+ u32 rir_way;
+ u64 ch_addr, offset, limit, prv = 0;
+
+
+ /*
+ * Step 0) Check if the address is at special memory ranges
+ * The check bellow is probably enough to fill all cases where
+ * the error is not inside a memory, except for the legacy
+ * range (e. g. VGA addresses). It is unlikely, however, that the
+ * memory controller would generate an error on that range.
+ */
+ if ((addr > (u64) pvt->tolm) && (addr < (1L << 32))) {
+ sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ if (addr >= (u64)pvt->tohm) {
+ sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+
+ /*
+ * Step 1) Get socket
+ */
+ for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
+ pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
+ ®);
+
+ if (!DRAM_RULE_ENABLE(reg))
+ continue;
+
+ limit = SAD_LIMIT(reg);
+ if (limit <= prv) {
+ sprintf(msg, "Can't discover the memory socket");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ if (addr <= limit)
+ break;
+ prv = limit;
+ }
+ if (n_sads == MAX_SAD) {
+ sprintf(msg, "Can't discover the memory socket");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ area_type = get_dram_attr(reg);
+ interleave_mode = INTERLEAVE_MODE(reg);
+
+ pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
+ ®);
+ sad_interl = sad_pkg(reg, 0);
+ for (sad_way = 0; sad_way < 8; sad_way++) {
+ if (sad_way > 0 && sad_interl == sad_pkg(reg, sad_way))
+ break;
+ sad_interleave[sad_way] = sad_pkg(reg, sad_way);
+ debugf0("SAD interleave #%d: %d\n",
+ sad_way, sad_interleave[sad_way]);
+ }
+ debugf0("mc#%d: Error detected on SAD#%d: address 0x%016Lx < 0x%016Lx, Interleave [%d:6]%s\n",
+ pvt->sbridge_dev->mc,
+ n_sads,
+ addr,
+ limit,
+ sad_way + 7,
+ INTERLEAVE_MODE(reg) ? "" : "XOR[18:16]");
+ if (interleave_mode)
+ idx = ((addr >> 6) ^ (addr >> 16)) & 7;
+ else
+ idx = (addr >> 6) & 7;
+ switch (sad_way) {
+ case 1:
+ idx = 0;
+ break;
+ case 2:
+ idx = idx & 1;
+ break;
+ case 4:
+ idx = idx & 3;
+ break;
+ case 8:
+ break;
+ default:
+ sprintf(msg, "Can't discover socket interleave");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ *socket = sad_interleave[idx];
+ debugf0("SAD interleave index: %d (wayness %d) = CPU socket %d\n",
+ idx, sad_way, *socket);
+
+ /*
+ * Move to the proper node structure, in order to access the
+ * right PCI registers
+ */
+ new_mci = get_mci_for_node_id(*socket);
+ if (!new_mci) {
+ sprintf(msg, "Struct for socket #%u wasn't initialized",
+ *socket);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ mci = new_mci;
+ pvt = mci->pvt_info;
+
+ /*
+ * Step 2) Get memory channel
+ */
+ prv = 0;
+ for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+ pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
+ ®);
+ limit = TAD_LIMIT(reg);
+ if (limit <= prv) {
+ sprintf(msg, "Can't discover the memory channel");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ if (addr <= limit)
+ break;
+ prv = limit;
+ }
+ ch_way = TAD_CH(reg) + 1;
+ sck_way = TAD_SOCK(reg) + 1;
+ /*
+ * FIXME: Is it right to always use channel 0 for offsets?
+ */
+ pci_read_config_dword(pvt->pci_tad[0],
+ tad_ch_nilv_offset[n_tads],
+ &tad_offset);
+
+ if (ch_way == 3)
+ idx = addr >> 6;
+ else
+ idx = addr >> (6 + sck_way);
+ idx = idx % ch_way;
+
+ /*
+ * FIXME: Shouldn't we use CHN_IDX_OFFSET() here, when ch_way == 3 ???
+ */
+ switch (idx) {
+ case 0:
+ base_ch = TAD_TGT0(reg);
+ break;
+ case 1:
+ base_ch = TAD_TGT1(reg);
+ break;
+ case 2:
+ base_ch = TAD_TGT2(reg);
+ break;
+ case 3:
+ base_ch = TAD_TGT3(reg);
+ break;
+ default:
+ sprintf(msg, "Can't discover the TAD target");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ *channel_mask = 1 << base_ch;
+
+ if (pvt->is_mirrored) {
+ *channel_mask |= 1 << ((base_ch + 2) % 4);
+ switch(ch_way) {
+ case 2:
+ case 4:
+ sck_xch = 1 << sck_way * (ch_way >> 1);
+ break;
+ default:
+ sprintf(msg, "Invalid mirror set. Can't decode addr");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ } else
+ sck_xch = (1 << sck_way) * ch_way;
+
+ if (pvt->is_lockstep)
+ *channel_mask |= 1 << ((base_ch + 1) % 4);
+
+ offset = TAD_OFFSET(tad_offset);
+
+ debugf0("TAD#%d: address 0x%016Lx < 0x%016Lx, socket interleave %d, channel interleave %d (offset 0x%08Lx), index %d, base ch: %d, ch mask: 0x%02lx\n",
+ n_tads,
+ addr,
+ limit,
+ (u32)TAD_SOCK(reg),
+ ch_way,
+ offset,
+ idx,
+ base_ch,
+ *channel_mask);
+
+ /* Calculate channel address */
+ /* Remove the TAD offset */
+
+ if (offset > addr) {
+ sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!",
+ offset, addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ addr -= offset;
+ /* Store the low bits [0:6] of the addr */
+ ch_addr = addr & 0x7f;
+ /* Remove socket wayness and remove 6 bits */
+ addr >>= 6;
+ addr /= sck_xch;
+#if 0
+ /* Divide by channel way */
+ addr = addr / ch_way;
+#endif
+ /* Recover the last 6 bits */
+ ch_addr |= addr << 6;
+
+ /*
+ * Step 3) Decode rank
+ */
+ for (n_rir = 0; n_rir < MAX_RIR_RANGES; n_rir++) {
+ pci_read_config_dword(pvt->pci_tad[base_ch],
+ rir_way_limit[n_rir],
+ ®);
+
+ if (!IS_RIR_VALID(reg))
+ continue;
+
+ limit = RIR_LIMIT(reg);
+
+ debugf0("RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d\n",
+ n_rir,
+ (limit >> 20) / 1000, (limit >> 20) % 1000,
+ limit,
+ 1 << RIR_WAY(reg));
+ if (ch_addr <= limit)
+ break;
+ }
+ if (n_rir == MAX_RIR_RANGES) {
+ sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx",
+ ch_addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ rir_way = RIR_WAY(reg);
+ if (pvt->is_close_pg)
+ idx = (ch_addr >> 6);
+ else
+ idx = (ch_addr >> 13); /* FIXME: Datasheet says to shift by 15 */
+ idx %= 1 << rir_way;
+
+ pci_read_config_dword(pvt->pci_tad[base_ch],
+ rir_offset[n_rir][idx],
+ ®);
+ *rank = RIR_RNK_TGT(reg);
+
+ debugf0("RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n",
+ n_rir,
+ ch_addr,
+ limit,
+ rir_way,
+ idx);
+
+ return 0;
+}
+
+/****************************************************************************
+ Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ * sbridge_put_all_devices 'put' all the devices that we have
+ * reserved via 'get'
+ */
+static void sbridge_put_devices(struct sbridge_dev *sbridge_dev)
+{
+ int i;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+ for (i = 0; i < sbridge_dev->n_devs; i++) {
+ struct pci_dev *pdev = sbridge_dev->pdev[i];
+ if (!pdev)
+ continue;
+ debugf0("Removing dev %02x:%02x.%d\n",
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ pci_dev_put(pdev);
+ }
+}
+
+static void sbridge_put_all_devices(void)
+{
+ struct sbridge_dev *sbridge_dev, *tmp;
+
+ list_for_each_entry_safe(sbridge_dev, tmp, &sbridge_edac_list, list) {
+ sbridge_put_devices(sbridge_dev);
+ free_sbridge_dev(sbridge_dev);
+ }
+}
+
+/*
+ * sbridge_get_all_devices Find and perform 'get' operation on the MCH's
+ * device/functions we want to reference for this driver
+ *
+ * Need to 'get' device 16 func 1 and func 2
+ */
+static int sbridge_get_onedevice(struct pci_dev **prev,
+ u8 *num_mc,
+ const struct pci_id_table *table,
+ const unsigned devno)
+{
+ struct sbridge_dev *sbridge_dev;
+ const struct pci_id_descr *dev_descr = &table->descr[devno];
+
+ struct pci_dev *pdev = NULL;
+ u8 bus = 0;
+
+ sbridge_printk(KERN_INFO,
+ "Seeking for: dev %02x.%d PCI ID %04x:%04x\n",
+ dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ dev_descr->dev_id, *prev);
+
+ if (!pdev) {
+ if (*prev) {
+ *prev = pdev;
+ return 0;
+ }
+
+ if (dev_descr->optional)
+ return 0;
+
+ if (devno == 0)
+ return -ENODEV;
+
+ sbridge_printk(KERN_INFO,
+ "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+ dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ /* End of list, leave */
+ return -ENODEV;
+ }
+ bus = pdev->bus->number;
+
+ sbridge_dev = get_sbridge_dev(bus);
+ if (!sbridge_dev) {
+ sbridge_dev = alloc_sbridge_dev(bus, table);
+ if (!sbridge_dev) {
+ pci_dev_put(pdev);
+ return -ENOMEM;
+ }
+ (*num_mc)++;
+ }
+
+ if (sbridge_dev->pdev[devno]) {
+ sbridge_printk(KERN_ERR,
+ "Duplicated device for "
+ "dev %02x:%d.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
+
+ sbridge_dev->pdev[devno] = pdev;
+
+ /* Sanity check */
+ if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+ PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+ sbridge_printk(KERN_ERR,
+ "Device PCI ID %04x:%04x "
+ "has dev %02x:%d.%d instead of dev %02x:%02x.%d\n",
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+ bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ bus, dev_descr->dev, dev_descr->func);
+ return -ENODEV;
+ }
+
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ sbridge_printk(KERN_ERR,
+ "Couldn't enable "
+ "dev %02x:%d.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ return -ENODEV;
+ }
+
+ debugf0("Detected dev %02x:%d.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev,
+ dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ /*
+ * As stated on drivers/pci/search.c, the reference count for
+ * @from is always decremented if it is not %NULL. So, as we need
+ * to get all devices up to null, we need to do a get for the device
+ */
+ pci_dev_get(pdev);
+
+ *prev = pdev;
+
+ return 0;
+}
+
+static int sbridge_get_all_devices(u8 *num_mc)
+{
+ int i, rc;
+ struct pci_dev *pdev = NULL;
+ const struct pci_id_table *table = pci_dev_descr_sbridge_table;
+
+ while (table && table->descr) {
+ for (i = 0; i < table->n_devs; i++) {
+ pdev = NULL;
+ do {
+ rc = sbridge_get_onedevice(&pdev, num_mc,
+ table, i);
+ if (rc < 0) {
+ if (i == 0) {
+ i = table->n_devs;
+ break;
+ }
+ sbridge_put_all_devices();
+ return -ENODEV;
+ }
+ } while (pdev);
+ }
+ table++;
+ }
+
+ return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+ struct sbridge_dev *sbridge_dev)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ int i, func, slot;
+
+ for (i = 0; i < sbridge_dev->n_devs; i++) {
+ pdev = sbridge_dev->pdev[i];
+ if (!pdev)
+ continue;
+ slot = PCI_SLOT(pdev->devfn);
+ func = PCI_FUNC(pdev->devfn);
+ switch (slot) {
+ case 12:
+ switch (func) {
+ case 6:
+ pvt->pci_sad0 = pdev;
+ break;
+ case 7:
+ pvt->pci_sad1 = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 13:
+ switch (func) {
+ case 6:
+ pvt->pci_br = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 14:
+ switch (func) {
+ case 0:
+ pvt->pci_ha0 = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 15:
+ switch (func) {
+ case 0:
+ pvt->pci_ta = pdev;
+ break;
+ case 1:
+ pvt->pci_ras = pdev;
+ break;
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ pvt->pci_tad[func - 2] = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 17:
+ switch (func) {
+ case 0:
+ pvt->pci_ddrio = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ default:
+ goto error;
+ }
+
+ debugf0("Associated PCI %02x.%02d.%d with dev = %p\n",
+ sbridge_dev->bus,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ pdev);
+ }
+
+ /* Check if everything were registered */
+ if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha0 ||
+ !pvt-> pci_tad || !pvt->pci_ras || !pvt->pci_ta ||
+ !pvt->pci_ddrio)
+ goto enodev;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (!pvt->pci_tad[i])
+ goto enodev;
+ }
+ return 0;
+
+enodev:
+ sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+ return -ENODEV;
+
+error:
+ sbridge_printk(KERN_ERR, "Device %d, function %d "
+ "is out of the expected range\n",
+ slot, func);
+ return -EINVAL;
+}
+
+/****************************************************************************
+ Error check routines
+ ****************************************************************************/
+
+/*
+ * While Sandy Bridge has error count registers, SMI BIOS read values from
+ * and resets the counters. So, they are not reliable for the OS to read
+ * from them. So, we have no option but to just trust on whatever MCE is
+ * telling us about the errors.
+ */
+static void sbridge_mce_output_error(struct mem_ctl_info *mci,
+ const struct mce *m)
+{
+ struct mem_ctl_info *new_mci;
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ char *type, *optype, *msg, *recoverable_msg;
+ bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
+ bool overflow = GET_BITFIELD(m->status, 62, 62);
+ bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
+ bool recoverable = GET_BITFIELD(m->status, 56, 56);
+ u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+ u32 mscod = GET_BITFIELD(m->status, 16, 31);
+ u32 errcode = GET_BITFIELD(m->status, 0, 15);
+ u32 channel = GET_BITFIELD(m->status, 0, 3);
+ u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+ long channel_mask, first_channel;
+ u8 rank, socket;
+ int csrow, rc, dimm;
+ char *area_type = "Unknown";
+
+ if (ripv)
+ type = "NON_FATAL";
+ else
+ type = "FATAL";
+
+ /*
+ * According with Table 15-9 of the Intel Archictecture spec vol 3A,
+ * memory errors should fit in this mask:
+ * 000f 0000 1mmm cccc (binary)
+ * where:
+ * f = Correction Report Filtering Bit. If 1, subsequent errors
+ * won't be shown
+ * mmm = error type
+ * cccc = channel
+ * If the mask doesn't match, report an error to the parsing logic
+ */
+ if (! ((errcode & 0xef80) == 0x80)) {
+ optype = "Can't parse: it is not a mem";
+ } else {
+ switch (optypenum) {
+ case 0:
+ optype = "generic undef request";
+ break;
+ case 1:
+ optype = "memory read";
+ break;
+ case 2:
+ optype = "memory write";
+ break;
+ case 3:
+ optype = "addr/cmd";
+ break;
+ case 4:
+ optype = "memory scrubbing";
+ break;
+ default:
+ optype = "reserved";
+ break;
+ }
+ }
+
+ rc = get_memory_error_data(mci, m->addr, &socket,
+ &channel_mask, &rank, area_type);
+ if (rc < 0)
+ return;
+ new_mci = get_mci_for_node_id(socket);
+ if (!new_mci) {
+ edac_mc_handle_ce_no_info(mci, "Error: socket got corrupted!");
+ return;
+ }
+ mci = new_mci;
+ pvt = mci->pvt_info;
+
+ first_channel = find_first_bit(&channel_mask, NUM_CHANNELS);
+
+ if (rank < 4)
+ dimm = 0;
+ else if (rank < 8)
+ dimm = 1;
+ else
+ dimm = 2;
+
+ csrow = pvt->csrow_map[first_channel][dimm];
+
+ if (uncorrected_error && recoverable)
+ recoverable_msg = " recoverable";
+ else
+ recoverable_msg = "";
+
+ /*
+ * FIXME: What should we do with "channel" information on mcelog?
+ * Probably, we can just discard it, as the channel information
+ * comes from the get_memory_error_data() address decoding
+ */
+ msg = kasprintf(GFP_ATOMIC,
+ "%d %s error(s): %s on %s area %s%s: cpu=%d Err=%04x:%04x (ch=%d), "
+ "addr = 0x%08llx => socket=%d, Channel=%ld(mask=%ld), rank=%d\n",
+ core_err_cnt,
+ area_type,
+ optype,
+ type,
+ recoverable_msg,
+ overflow ? "OVERFLOW" : "",
+ m->cpu,
+ mscod, errcode,
+ channel, /* 1111b means not specified */
+ (long long) m->addr,
+ socket,
+ first_channel, /* This is the real channel on SB */
+ channel_mask,
+ rank);
+
+ debugf0("%s", msg);
+
+ /* Call the helper to output message */
+ if (uncorrected_error)
+ edac_mc_handle_fbd_ue(mci, csrow, 0, 0, msg);
+ else
+ edac_mc_handle_fbd_ce(mci, csrow, 0, msg);
+
+ kfree(msg);
+}
+
+/*
+ * sbridge_check_error Retrieve and process errors reported by the
+ * hardware. Called by the Core module.
+ */
+static void sbridge_check_error(struct mem_ctl_info *mci)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ int i;
+ unsigned count = 0;
+ struct mce *m;
+
+ /*
+ * MCE first step: Copy all mce errors into a temporary buffer
+ * We use a double buffering here, to reduce the risk of
+ * loosing an error.
+ */
+ smp_rmb();
+ count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+ % MCE_LOG_LEN;
+ if (!count)
+ return;
+
+ m = pvt->mce_outentry;
+ if (pvt->mce_in + count > MCE_LOG_LEN) {
+ unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+ smp_wmb();
+ pvt->mce_in = 0;
+ count -= l;
+ m += l;
+ }
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+ smp_wmb();
+ pvt->mce_in += count;
+
+ smp_rmb();
+ if (pvt->mce_overrun) {
+ sbridge_printk(KERN_ERR, "Lost %d memory errors\n",
+ pvt->mce_overrun);
+ smp_wmb();
+ pvt->mce_overrun = 0;
+ }
+
+ /*
+ * MCE second step: parse errors and display
+ */
+ for (i = 0; i < count; i++)
+ sbridge_mce_output_error(mci, &pvt->mce_outentry[i]);
+}
+
+/*
+ * sbridge_mce_check_error Replicates mcelog routine to get errors
+ * This routine simply queues mcelog errors, and
+ * return. The error itself should be handled later
+ * by sbridge_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
+ void *data)
+{
+ struct mce *mce = (struct mce *)data;
+ struct mem_ctl_info *mci;
+ struct sbridge_pvt *pvt;
+
+ mci = get_mci_for_node_id(mce->socketid);
+ if (!mci)
+ return NOTIFY_BAD;
+ pvt = mci->pvt_info;
+
+ /*
+ * Just let mcelog handle it if the error is
+ * outside the memory controller. A memory error
+ * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0.
+ * bit 12 has an special meaning.
+ */
+ if ((mce->status & 0xefff) >> 7 != 1)
+ return NOTIFY_DONE;
+
+ printk("sbridge: HANDLING MCE MEMORY ERROR\n");
+
+ printk("CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n",
+ mce->extcpu, mce->mcgstatus, mce->bank, mce->status);
+ printk("TSC %llx ", mce->tsc);
+ printk("ADDR %llx ", mce->addr);
+ printk("MISC %llx ", mce->misc);
+
+ printk("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+ mce->cpuvendor, mce->cpuid, mce->time,
+ mce->socketid, mce->apicid);
+
+#ifdef CONFIG_SMP
+ /* Only handle if it is the right mc controller */
+ if (cpu_data(mce->cpu).phys_proc_id != pvt->sbridge_dev->mc)
+ return NOTIFY_DONE;
+#endif
+
+ smp_rmb();
+ if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+ smp_wmb();
+ pvt->mce_overrun++;
+ return NOTIFY_DONE;
+ }
+
+ /* Copy memory error at the ringbuffer */
+ memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+ smp_wmb();
+ pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+ /* Handle fatal errors immediately */
+ if (mce->mcgstatus & 1)
+ sbridge_check_error(mci);
+
+ /* Advice mcelog that the error were handled */
+ return NOTIFY_STOP;
+}
+
+static struct notifier_block sbridge_mce_dec = {
+ .notifier_call = sbridge_mce_check_error,
+};
+
+/****************************************************************************
+ EDAC register/unregister logic
+ ****************************************************************************/
+
+static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev)
+{
+ struct mem_ctl_info *mci = sbridge_dev->mci;
+ struct sbridge_pvt *pvt;
+
+ if (unlikely(!mci || !mci->pvt_info)) {
+ debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
+ __func__, &sbridge_dev->pdev[0]->dev);
+
+ sbridge_printk(KERN_ERR, "Couldn't find mci handler\n");
+ return;
+ }
+
+ pvt = mci->pvt_info;
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
+ __func__, mci, &sbridge_dev->pdev[0]->dev);
+
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain,
+ &sbridge_mce_dec);
+
+ /* Remove MC sysfs nodes */
+ edac_mc_del_mc(mci->dev);
+
+ debugf1("%s: free mci struct\n", mci->ctl_name);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ sbridge_dev->mci = NULL;
+}
+
+static int sbridge_register_mci(struct sbridge_dev *sbridge_dev)
+{
+ struct mem_ctl_info *mci;
+ struct sbridge_pvt *pvt;
+ int rc, channels, csrows;
+
+ /* Check the number of active and not disabled channels */
+ rc = sbridge_get_active_channels(sbridge_dev->bus, &channels, &csrows);
+ if (unlikely(rc < 0))
+ return rc;
+
+ /* allocate a new MC control structure */
+ mci = edac_mc_alloc(sizeof(*pvt), csrows, channels, sbridge_dev->mc);
+ if (unlikely(!mci))
+ return -ENOMEM;
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
+ __func__, mci, &sbridge_dev->pdev[0]->dev);
+
+ pvt = mci->pvt_info;
+ memset(pvt, 0, sizeof(*pvt));
+
+ /* Associate sbridge_dev and mci for future usage */
+ pvt->sbridge_dev = sbridge_dev;
+ sbridge_dev->mci = mci;
+
+ mci->mtype_cap = MEM_FLAG_DDR3;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE;
+ mci->edac_cap = EDAC_FLAG_NONE;
+ mci->mod_name = "sbridge_edac.c";
+ mci->mod_ver = SBRIDGE_REVISION;
+ mci->ctl_name = kasprintf(GFP_KERNEL, "Sandy Bridge Socket#%d", mci->mc_idx);
+ mci->dev_name = pci_name(sbridge_dev->pdev[0]);
+ mci->ctl_page_to_phys = NULL;
+
+ /* Set the function pointer to an actual operation function */
+ mci->edac_check = sbridge_check_error;
+
+ /* Store pci devices at mci for faster access */
+ rc = mci_bind_devs(mci, sbridge_dev);
+ if (unlikely(rc < 0))
+ goto fail0;
+
+ /* Get dimm basic config and the memory layout */
+ get_dimm_config(mci);
+ get_memory_layout(mci);
+
+ /* record ptr to the generic device */
+ mci->dev = &sbridge_dev->pdev[0]->dev;
+
+ /* add this new MC control structure to EDAC's list of MCs */
+ if (unlikely(edac_mc_add_mc(mci))) {
+ debugf0("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n", __func__);
+ rc = -EINVAL;
+ goto fail0;
+ }
+
+ atomic_notifier_chain_register(&x86_mce_decoder_chain,
+ &sbridge_mce_dec);
+ return 0;
+
+fail0:
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ sbridge_dev->mci = NULL;
+ return rc;
+}
+
+/*
+ * sbridge_probe Probe for ONE instance of device to see if it is
+ * present.
+ * return:
+ * 0 for FOUND a device
+ * < 0 for error code
+ */
+
+static int __devinit sbridge_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int rc;
+ u8 mc, num_mc = 0;
+ struct sbridge_dev *sbridge_dev;
+
+ /* get the pci devices we want to reserve for our use */
+ mutex_lock(&sbridge_edac_lock);
+
+ /*
+ * All memory controllers are allocated at the first pass.
+ */
+ if (unlikely(probed >= 1)) {
+ mutex_unlock(&sbridge_edac_lock);
+ return -ENODEV;
+ }
+ probed++;
+
+ rc = sbridge_get_all_devices(&num_mc);
+ if (unlikely(rc < 0))
+ goto fail0;
+ mc = 0;
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+ debugf0("Registering MC#%d (%d of %d)\n", mc, mc + 1, num_mc);
+ sbridge_dev->mc = mc++;
+ rc = sbridge_register_mci(sbridge_dev);
+ if (unlikely(rc < 0))
+ goto fail1;
+ }
+
+ sbridge_printk(KERN_INFO, "Driver loaded.\n");
+
+ mutex_unlock(&sbridge_edac_lock);
+ return 0;
+
+fail1:
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+ sbridge_unregister_mci(sbridge_dev);
+
+ sbridge_put_all_devices();
+fail0:
+ mutex_unlock(&sbridge_edac_lock);
+ return rc;
+}
+
+/*
+ * sbridge_remove destructor for one instance of device
+ *
+ */
+static void __devexit sbridge_remove(struct pci_dev *pdev)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ /*
+ * we have a trouble here: pdev value for removal will be wrong, since
+ * it will point to the X58 register used to detect that the machine
+ * is a Nehalem or upper design. However, due to the way several PCI
+ * devices are grouped together to provide MC functionality, we need
+ * to use a different method for releasing the devices
+ */
+
+ mutex_lock(&sbridge_edac_lock);
+
+ if (unlikely(!probed)) {
+ mutex_unlock(&sbridge_edac_lock);
+ return;
+ }
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+ sbridge_unregister_mci(sbridge_dev);
+
+ /* Release PCI resources */
+ sbridge_put_all_devices();
+
+ probed--;
+
+ mutex_unlock(&sbridge_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, sbridge_pci_tbl);
+
+/*
+ * sbridge_driver pci_driver structure for this module
+ *
+ */
+static struct pci_driver sbridge_driver = {
+ .name = "sbridge_edac",
+ .probe = sbridge_probe,
+ .remove = __devexit_p(sbridge_remove),
+ .id_table = sbridge_pci_tbl,
+};
+
+/*
+ * sbridge_init Module entry function
+ * Try to initialize this module for its devices
+ */
+static int __init sbridge_init(void)
+{
+ int pci_rc;
+
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ pci_rc = pci_register_driver(&sbridge_driver);
+
+ if (pci_rc >= 0)
+ return 0;
+
+ sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
+ pci_rc);
+
+ return pci_rc;
+}
+
+/*
+ * sbridge_exit() Module exit function
+ * Unregister the driver
+ */
+static void __exit sbridge_exit(void)
+{
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ pci_unregister_driver(&sbridge_driver);
+}
+
+module_init(sbridge_init);
+module_exit(sbridge_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel Sandy Bridge memory controllers - "
+ SBRIDGE_REVISION);
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index 334b82a..855ab3f 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -1046,8 +1046,8 @@
cycles = card->split_timeout_hi * 8000 + (card->split_timeout_lo >> 19);
- cycles = max(cycles, 800u); /* minimum as per the spec */
- cycles = min(cycles, 3u * 8000u); /* maximum OHCI timeout */
+ /* minimum per IEEE 1394, maximum which doesn't overflow OHCI */
+ cycles = clamp(cycles, 800u, 3u * 8000u);
card->split_timeout_cycles = cycles;
card->split_timeout_jiffies = DIV_ROUND_UP(cycles * HZ, 8000);
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 03a7a85..a20f45b 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -502,11 +502,7 @@
static unsigned fwnet_max_payload(unsigned max_rec, unsigned speed)
{
max_rec = min(max_rec, speed + 8);
- max_rec = min(max_rec, 0xbU); /* <= 4096 */
- if (max_rec < 8) {
- fw_notify("max_rec %x out of range\n", max_rec);
- max_rec = 8;
- }
+ max_rec = clamp(max_rec, 8U, 11U); /* 512...4096 */
return (1 << (max_rec + 1)) - RFC2374_FRAG_HDR_SIZE;
}
@@ -1125,17 +1121,12 @@
unsigned u;
if (dev->local_fifo == FWNET_NO_FIFO_ADDR) {
- /* outside OHCI posted write area? */
- static const struct fw_address_region region = {
- .start = 0xffff00000000ULL,
- .end = CSR_REGISTER_BASE,
- };
-
dev->handler.length = 4096;
dev->handler.address_callback = fwnet_receive_packet;
dev->handler.callback_data = dev;
- retval = fw_core_add_address_handler(&dev->handler, ®ion);
+ retval = fw_core_add_address_handler(&dev->handler,
+ &fw_high_memory_region);
if (retval < 0)
goto failed_initial;
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index fd7170a..6628fea 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -42,6 +42,7 @@
#include <linux/string.h>
#include <linux/time.h>
#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
#include <asm/byteorder.h>
#include <asm/page.h>
@@ -125,6 +126,7 @@
struct fw_ohci *ohci;
u32 regs;
int total_allocation;
+ u32 current_bus;
bool running;
bool flushing;
@@ -226,7 +228,7 @@
__le32 *self_id_cpu;
dma_addr_t self_id_bus;
- struct tasklet_struct bus_reset_tasklet;
+ struct work_struct bus_reset_work;
u32 self_id_buffer[512];
};
@@ -263,6 +265,8 @@
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
+#define PCI_DEVICE_ID_TI_TSB12LV26 0x8020
+#define PCI_DEVICE_ID_TI_TSB82AA2 0x8025
#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd
#define QUIRK_CYCLE_TIMER 1
@@ -270,6 +274,7 @@
#define QUIRK_BE_HEADERS 4
#define QUIRK_NO_1394A 8
#define QUIRK_NO_MSI 16
+#define QUIRK_TI_SLLZ059 32
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
@@ -299,6 +304,12 @@
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV26, PCI_ANY_ID,
+ QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059},
+
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB82AA2, PCI_ANY_ID,
+ QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059},
+
{PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID,
QUIRK_RESET_PACKET},
@@ -315,6 +326,7 @@
", AR/selfID endianess = " __stringify(QUIRK_BE_HEADERS)
", no 1394a enhancements = " __stringify(QUIRK_NO_1394A)
", disable MSI = " __stringify(QUIRK_NO_MSI)
+ ", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059)
")");
#define OHCI_PARAM_DEBUG_AT_AR 1
@@ -859,7 +871,7 @@
*
* Alas some chips sometimes emit bus reset packets with a
* wrong generation. We set the correct generation for these
- * at a slightly incorrect time (in bus_reset_tasklet).
+ * at a slightly incorrect time (in bus_reset_work).
*/
if (evt == OHCI1394_evt_bus_reset) {
if (!(ohci->quirks & QUIRK_RESET_PACKET))
@@ -1046,6 +1058,7 @@
address = le32_to_cpu(last->branch_address);
z = address & 0xf;
address &= ~0xf;
+ ctx->current_bus = address;
/* If the branch address points to a buffer outside of the
* current buffer, advance to the next buffer. */
@@ -1713,9 +1726,94 @@
return ohci->bus_time | cycle_time_seconds;
}
-static void bus_reset_tasklet(unsigned long data)
+static int get_status_for_port(struct fw_ohci *ohci, int port_index)
{
- struct fw_ohci *ohci = (struct fw_ohci *)data;
+ int reg;
+
+ mutex_lock(&ohci->phy_reg_mutex);
+ reg = write_phy_reg(ohci, 7, port_index);
+ if (reg >= 0)
+ reg = read_phy_reg(ohci, 8);
+ mutex_unlock(&ohci->phy_reg_mutex);
+ if (reg < 0)
+ return reg;
+
+ switch (reg & 0x0f) {
+ case 0x06:
+ return 2; /* is child node (connected to parent node) */
+ case 0x0e:
+ return 3; /* is parent node (connected to child node) */
+ }
+ return 1; /* not connected */
+}
+
+static int get_self_id_pos(struct fw_ohci *ohci, u32 self_id,
+ int self_id_count)
+{
+ int i;
+ u32 entry;
+
+ for (i = 0; i < self_id_count; i++) {
+ entry = ohci->self_id_buffer[i];
+ if ((self_id & 0xff000000) == (entry & 0xff000000))
+ return -1;
+ if ((self_id & 0xff000000) < (entry & 0xff000000))
+ return i;
+ }
+ return i;
+}
+
+/*
+ * TI TSB82AA2B and TSB12LV26 do not receive the selfID of a locally
+ * attached TSB41BA3D phy; see http://www.ti.com/litv/pdf/sllz059.
+ * Construct the selfID from phy register contents.
+ * FIXME: How to determine the selfID.i flag?
+ */
+static int find_and_insert_self_id(struct fw_ohci *ohci, int self_id_count)
+{
+ int reg, i, pos, status;
+ /* link active 1, speed 3, bridge 0, contender 1, more packets 0 */
+ u32 self_id = 0x8040c800;
+
+ reg = reg_read(ohci, OHCI1394_NodeID);
+ if (!(reg & OHCI1394_NodeID_idValid)) {
+ fw_notify("node ID not valid, new bus reset in progress\n");
+ return -EBUSY;
+ }
+ self_id |= ((reg & 0x3f) << 24); /* phy ID */
+
+ reg = ohci_read_phy_reg(&ohci->card, 4);
+ if (reg < 0)
+ return reg;
+ self_id |= ((reg & 0x07) << 8); /* power class */
+
+ reg = ohci_read_phy_reg(&ohci->card, 1);
+ if (reg < 0)
+ return reg;
+ self_id |= ((reg & 0x3f) << 16); /* gap count */
+
+ for (i = 0; i < 3; i++) {
+ status = get_status_for_port(ohci, i);
+ if (status < 0)
+ return status;
+ self_id |= ((status & 0x3) << (6 - (i * 2)));
+ }
+
+ pos = get_self_id_pos(ohci, self_id, self_id_count);
+ if (pos >= 0) {
+ memmove(&(ohci->self_id_buffer[pos+1]),
+ &(ohci->self_id_buffer[pos]),
+ (self_id_count - pos) * sizeof(*ohci->self_id_buffer));
+ ohci->self_id_buffer[pos] = self_id;
+ self_id_count++;
+ }
+ return self_id_count;
+}
+
+static void bus_reset_work(struct work_struct *work)
+{
+ struct fw_ohci *ohci =
+ container_of(work, struct fw_ohci, bus_reset_work);
int self_id_count, i, j, reg;
int generation, new_generation;
unsigned long flags;
@@ -1753,21 +1851,50 @@
* bit extra to get the actual number of self IDs.
*/
self_id_count = (reg >> 3) & 0xff;
- if (self_id_count == 0 || self_id_count > 252) {
+
+ if (self_id_count > 252) {
fw_notify("inconsistent self IDs\n");
return;
}
+
generation = (cond_le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
rmb();
for (i = 1, j = 0; j < self_id_count; i += 2, j++) {
if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1]) {
- fw_notify("inconsistent self IDs\n");
- return;
+ /*
+ * If the invalid data looks like a cycle start packet,
+ * it's likely to be the result of the cycle master
+ * having a wrong gap count. In this case, the self IDs
+ * so far are valid and should be processed so that the
+ * bus manager can then correct the gap count.
+ */
+ if (cond_le32_to_cpu(ohci->self_id_cpu[i])
+ == 0xffff008f) {
+ fw_notify("ignoring spurious self IDs\n");
+ self_id_count = j;
+ break;
+ } else {
+ fw_notify("inconsistent self IDs\n");
+ return;
+ }
}
ohci->self_id_buffer[j] =
cond_le32_to_cpu(ohci->self_id_cpu[i]);
}
+
+ if (ohci->quirks & QUIRK_TI_SLLZ059) {
+ self_id_count = find_and_insert_self_id(ohci, self_id_count);
+ if (self_id_count < 0) {
+ fw_notify("could not construct local self ID\n");
+ return;
+ }
+ }
+
+ if (self_id_count == 0) {
+ fw_notify("inconsistent self IDs\n");
+ return;
+ }
rmb();
/*
@@ -1887,7 +2014,7 @@
log_irqs(event);
if (event & OHCI1394_selfIDComplete)
- tasklet_schedule(&ohci->bus_reset_tasklet);
+ queue_work(fw_workqueue, &ohci->bus_reset_work);
if (event & OHCI1394_RQPkt)
tasklet_schedule(&ohci->ar_request_ctx.tasklet);
@@ -1934,7 +2061,8 @@
reg_read(ohci, OHCI1394_PostedWriteAddressLo);
reg_write(ohci, OHCI1394_IntEventClear,
OHCI1394_postedWriteErr);
- fw_error("PCI posted write error\n");
+ if (printk_ratelimit())
+ fw_error("PCI posted write error\n");
}
if (unlikely(event & OHCI1394_cycleTooLong)) {
@@ -2048,6 +2176,28 @@
return 0;
}
+static int probe_tsb41ba3d(struct fw_ohci *ohci)
+{
+ /* TI vendor ID = 0x080028, TSB41BA3D product ID = 0x833005 (sic) */
+ static const u8 id[] = { 0x08, 0x00, 0x28, 0x83, 0x30, 0x05, };
+ int reg, i;
+
+ reg = read_phy_reg(ohci, 2);
+ if (reg < 0)
+ return reg;
+ if ((reg & PHY_EXTENDED_REGISTERS) != PHY_EXTENDED_REGISTERS)
+ return 0;
+
+ for (i = ARRAY_SIZE(id) - 1; i >= 0; i--) {
+ reg = read_paged_phy_reg(ohci, 1, i + 10);
+ if (reg < 0)
+ return reg;
+ if (reg != id[i])
+ return 0;
+ }
+ return 1;
+}
+
static int ohci_enable(struct fw_card *card,
const __be32 *config_rom, size_t length)
{
@@ -2085,6 +2235,16 @@
return -EIO;
}
+ if (ohci->quirks & QUIRK_TI_SLLZ059) {
+ ret = probe_tsb41ba3d(ohci);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ fw_notify("local TSB41BA3D phy\n");
+ else
+ ohci->quirks &= ~QUIRK_TI_SLLZ059;
+ }
+
reg_write(ohci, OHCI1394_HCControlClear,
OHCI1394_HCControl_noByteSwapData);
@@ -2260,7 +2420,7 @@
* then set up the real values for the two registers.
*
* We use ohci->lock to avoid racing with the code that sets
- * ohci->next_config_rom to NULL (see bus_reset_tasklet).
+ * ohci->next_config_rom to NULL (see bus_reset_work).
*/
next_config_rom =
@@ -2539,6 +2699,7 @@
struct iso_context *ctx =
container_of(context, struct iso_context, context);
struct descriptor *pd;
+ u32 buffer_dma;
__le32 *ir_header;
void *p;
@@ -2549,6 +2710,16 @@
/* Descriptor(s) not done yet, stop iteration */
return 0;
+ while (!(d->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))) {
+ d++;
+ buffer_dma = le32_to_cpu(d->data_address);
+ dma_sync_single_range_for_cpu(context->ohci->card.device,
+ buffer_dma & PAGE_MASK,
+ buffer_dma & ~PAGE_MASK,
+ le16_to_cpu(d->req_count),
+ DMA_FROM_DEVICE);
+ }
+
p = last + 1;
copy_iso_headers(ctx, p);
@@ -2571,11 +2742,19 @@
{
struct iso_context *ctx =
container_of(context, struct iso_context, context);
+ u32 buffer_dma;
if (!last->transfer_status)
/* Descriptor(s) not done yet, stop iteration */
return 0;
+ buffer_dma = le32_to_cpu(last->data_address);
+ dma_sync_single_range_for_cpu(context->ohci->card.device,
+ buffer_dma & PAGE_MASK,
+ buffer_dma & ~PAGE_MASK,
+ le16_to_cpu(last->req_count),
+ DMA_FROM_DEVICE);
+
if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS)
ctx->base.callback.mc(&ctx->base,
le32_to_cpu(last->data_address) +
@@ -2586,6 +2765,43 @@
return 1;
}
+static inline void sync_it_packet_for_cpu(struct context *context,
+ struct descriptor *pd)
+{
+ __le16 control;
+ u32 buffer_dma;
+
+ /* only packets beginning with OUTPUT_MORE* have data buffers */
+ if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
+ return;
+
+ /* skip over the OUTPUT_MORE_IMMEDIATE descriptor */
+ pd += 2;
+
+ /*
+ * If the packet has a header, the first OUTPUT_MORE/LAST descriptor's
+ * data buffer is in the context program's coherent page and must not
+ * be synced.
+ */
+ if ((le32_to_cpu(pd->data_address) & PAGE_MASK) ==
+ (context->current_bus & PAGE_MASK)) {
+ if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
+ return;
+ pd++;
+ }
+
+ do {
+ buffer_dma = le32_to_cpu(pd->data_address);
+ dma_sync_single_range_for_cpu(context->ohci->card.device,
+ buffer_dma & PAGE_MASK,
+ buffer_dma & ~PAGE_MASK,
+ le16_to_cpu(pd->req_count),
+ DMA_TO_DEVICE);
+ control = pd->control;
+ pd++;
+ } while (!(control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS)));
+}
+
static int handle_it_packet(struct context *context,
struct descriptor *d,
struct descriptor *last)
@@ -2602,6 +2818,8 @@
/* Descriptor(s) not done yet, stop iteration */
return 0;
+ sync_it_packet_for_cpu(context, d);
+
i = ctx->header_length;
if (i + 4 < PAGE_SIZE) {
/* Present this value as big-endian to match the receive code */
@@ -2971,6 +3189,10 @@
page_bus = page_private(buffer->pages[page]);
pd[i].data_address = cpu_to_le32(page_bus + offset);
+ dma_sync_single_range_for_device(ctx->context.ohci->card.device,
+ page_bus, offset, length,
+ DMA_TO_DEVICE);
+
payload_index += length;
}
@@ -2995,6 +3217,7 @@
struct fw_iso_buffer *buffer,
unsigned long payload)
{
+ struct device *device = ctx->context.ohci->card.device;
struct descriptor *d, *pd;
dma_addr_t d_bus, page_bus;
u32 z, header_z, rest;
@@ -3049,6 +3272,10 @@
page_bus = page_private(buffer->pages[page]);
pd->data_address = cpu_to_le32(page_bus + offset);
+ dma_sync_single_range_for_device(device, page_bus,
+ offset, length,
+ DMA_FROM_DEVICE);
+
offset = (offset + length) & ~PAGE_MASK;
rest -= length;
if (offset == 0)
@@ -3108,6 +3335,10 @@
page_bus = page_private(buffer->pages[page]);
d->data_address = cpu_to_le32(page_bus + offset);
+ dma_sync_single_range_for_device(ctx->context.ohci->card.device,
+ page_bus, offset, length,
+ DMA_FROM_DEVICE);
+
rest -= length;
offset = 0;
page++;
@@ -3239,8 +3470,7 @@
spin_lock_init(&ohci->lock);
mutex_init(&ohci->phy_reg_mutex);
- tasklet_init(&ohci->bus_reset_tasklet,
- bus_reset_tasklet, (unsigned long)ohci);
+ INIT_WORK(&ohci->bus_reset_work, bus_reset_work);
err = pci_request_region(dev, 0, ohci_driver_name);
if (err) {
@@ -3382,6 +3612,7 @@
ohci = pci_get_drvdata(dev);
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
flush_writes(ohci);
+ cancel_work_sync(&ohci->bus_reset_work);
fw_core_remove_card(&ohci->card);
/*
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 17cef86..68375bc 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -154,12 +154,16 @@
bool blocked;
};
+static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
+{
+ queue_delayed_work(fw_workqueue, &lu->work, delay);
+}
+
/*
* We create one struct sbp2_target per IEEE 1212 Unit Directory
* and one struct Scsi_Host per sbp2_target.
*/
struct sbp2_target {
- struct kref kref;
struct fw_unit *unit;
const char *bus_id;
struct list_head lu_list;
@@ -772,71 +776,6 @@
return scsilun_to_int(&eight_bytes_lun);
}
-static void sbp2_release_target(struct kref *kref)
-{
- struct sbp2_target *tgt = container_of(kref, struct sbp2_target, kref);
- struct sbp2_logical_unit *lu, *next;
- struct Scsi_Host *shost =
- container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
- struct scsi_device *sdev;
- struct fw_device *device = target_device(tgt);
-
- /* prevent deadlocks */
- sbp2_unblock(tgt);
-
- list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
- sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun));
- if (sdev) {
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- }
- if (lu->login_id != INVALID_LOGIN_ID) {
- int generation, node_id;
- /*
- * tgt->node_id may be obsolete here if we failed
- * during initial login or after a bus reset where
- * the topology changed.
- */
- generation = device->generation;
- smp_rmb(); /* node_id vs. generation */
- node_id = device->node_id;
- sbp2_send_management_orb(lu, node_id, generation,
- SBP2_LOGOUT_REQUEST,
- lu->login_id, NULL);
- }
- fw_core_remove_address_handler(&lu->address_handler);
- list_del(&lu->link);
- kfree(lu);
- }
- scsi_remove_host(shost);
- fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
-
- fw_unit_put(tgt->unit);
- scsi_host_put(shost);
- fw_device_put(device);
-}
-
-static void sbp2_target_get(struct sbp2_target *tgt)
-{
- kref_get(&tgt->kref);
-}
-
-static void sbp2_target_put(struct sbp2_target *tgt)
-{
- kref_put(&tgt->kref, sbp2_release_target);
-}
-
-/*
- * Always get the target's kref when scheduling work on one its units.
- * Each workqueue job is responsible to call sbp2_target_put() upon return.
- */
-static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
-{
- sbp2_target_get(lu->tgt);
- if (!queue_delayed_work(fw_workqueue, &lu->work, delay))
- sbp2_target_put(lu->tgt);
-}
-
/*
* Write retransmit retry values into the BUSY_TIMEOUT register.
* - The single-phase retry protocol is supported by all SBP-2 devices, but the
@@ -877,7 +816,7 @@
int generation, node_id, local_node_id;
if (fw_device_is_shutdown(device))
- goto out;
+ return;
generation = device->generation;
smp_rmb(); /* node IDs must not be older than generation */
@@ -899,7 +838,7 @@
/* Let any waiting I/O fail from now on. */
sbp2_unblock(lu->tgt);
}
- goto out;
+ return;
}
tgt->node_id = node_id;
@@ -925,7 +864,8 @@
if (lu->has_sdev) {
sbp2_cancel_orbs(lu);
sbp2_conditionally_unblock(lu);
- goto out;
+
+ return;
}
if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
@@ -957,7 +897,8 @@
lu->has_sdev = true;
scsi_device_put(sdev);
sbp2_allow_block(lu);
- goto out;
+
+ return;
out_logout_login:
smp_rmb(); /* generation may have changed */
@@ -971,8 +912,57 @@
* lu->work already. Reset the work from reconnect to login.
*/
PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
- out:
- sbp2_target_put(tgt);
+}
+
+static void sbp2_reconnect(struct work_struct *work)
+{
+ struct sbp2_logical_unit *lu =
+ container_of(work, struct sbp2_logical_unit, work.work);
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_device *device = target_device(tgt);
+ int generation, node_id, local_node_id;
+
+ if (fw_device_is_shutdown(device))
+ return;
+
+ generation = device->generation;
+ smp_rmb(); /* node IDs must not be older than generation */
+ node_id = device->node_id;
+ local_node_id = device->card->node_id;
+
+ if (sbp2_send_management_orb(lu, node_id, generation,
+ SBP2_RECONNECT_REQUEST,
+ lu->login_id, NULL) < 0) {
+ /*
+ * If reconnect was impossible even though we are in the
+ * current generation, fall back and try to log in again.
+ *
+ * We could check for "Function rejected" status, but
+ * looking at the bus generation as simpler and more general.
+ */
+ smp_rmb(); /* get current card generation */
+ if (generation == device->card->generation ||
+ lu->retries++ >= 5) {
+ fw_error("%s: failed to reconnect\n", tgt->bus_id);
+ lu->retries = 0;
+ PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
+ }
+ sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
+
+ return;
+ }
+
+ tgt->node_id = node_id;
+ tgt->address_high = local_node_id << 16;
+ smp_wmb(); /* node IDs must not be older than generation */
+ lu->generation = generation;
+
+ fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
+ tgt->bus_id, lu->lun, lu->retries);
+
+ sbp2_agent_reset(lu);
+ sbp2_cancel_orbs(lu);
+ sbp2_conditionally_unblock(lu);
}
static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
@@ -1120,6 +1110,7 @@
}
static struct scsi_host_template scsi_driver_template;
+static int sbp2_remove(struct device *dev);
static int sbp2_probe(struct device *dev)
{
@@ -1141,7 +1132,6 @@
tgt = (struct sbp2_target *)shost->hostdata;
dev_set_drvdata(&unit->device, tgt);
tgt->unit = unit;
- kref_init(&tgt->kref);
INIT_LIST_HEAD(&tgt->lu_list);
tgt->bus_id = dev_name(&unit->device);
tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
@@ -1154,9 +1144,6 @@
if (scsi_add_host(shost, &unit->device) < 0)
goto fail_shost_put;
- fw_device_get(device);
- fw_unit_get(unit);
-
/* implicit directory ID */
tgt->directory_id = ((unit->directory - device->config_rom) * 4
+ CSR_CONFIG_ROM) & 0xffffff;
@@ -1166,7 +1153,7 @@
if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
&firmware_revision) < 0)
- goto fail_tgt_put;
+ goto fail_remove;
sbp2_clamp_management_orb_timeout(tgt);
sbp2_init_workarounds(tgt, model, firmware_revision);
@@ -1177,16 +1164,17 @@
* specifies the max payload size as 2 ^ (max_payload + 2), so
* if we set this to max_speed + 7, we get the right value.
*/
- tgt->max_payload = min(device->max_speed + 7, 10U);
- tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+ tgt->max_payload = min3(device->max_speed + 7, 10U,
+ device->card->max_receive - 1);
/* Do the login in a workqueue so we can easily reschedule retries. */
list_for_each_entry(lu, &tgt->lu_list, link)
sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
+
return 0;
- fail_tgt_put:
- sbp2_target_put(tgt);
+ fail_remove:
+ sbp2_remove(dev);
return -ENOMEM;
fail_shost_put:
@@ -1194,71 +1182,6 @@
return -ENOMEM;
}
-static int sbp2_remove(struct device *dev)
-{
- struct fw_unit *unit = fw_unit(dev);
- struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
- struct sbp2_logical_unit *lu;
-
- list_for_each_entry(lu, &tgt->lu_list, link)
- cancel_delayed_work_sync(&lu->work);
-
- sbp2_target_put(tgt);
- return 0;
-}
-
-static void sbp2_reconnect(struct work_struct *work)
-{
- struct sbp2_logical_unit *lu =
- container_of(work, struct sbp2_logical_unit, work.work);
- struct sbp2_target *tgt = lu->tgt;
- struct fw_device *device = target_device(tgt);
- int generation, node_id, local_node_id;
-
- if (fw_device_is_shutdown(device))
- goto out;
-
- generation = device->generation;
- smp_rmb(); /* node IDs must not be older than generation */
- node_id = device->node_id;
- local_node_id = device->card->node_id;
-
- if (sbp2_send_management_orb(lu, node_id, generation,
- SBP2_RECONNECT_REQUEST,
- lu->login_id, NULL) < 0) {
- /*
- * If reconnect was impossible even though we are in the
- * current generation, fall back and try to log in again.
- *
- * We could check for "Function rejected" status, but
- * looking at the bus generation as simpler and more general.
- */
- smp_rmb(); /* get current card generation */
- if (generation == device->card->generation ||
- lu->retries++ >= 5) {
- fw_error("%s: failed to reconnect\n", tgt->bus_id);
- lu->retries = 0;
- PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
- }
- sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
- goto out;
- }
-
- tgt->node_id = node_id;
- tgt->address_high = local_node_id << 16;
- smp_wmb(); /* node IDs must not be older than generation */
- lu->generation = generation;
-
- fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
- tgt->bus_id, lu->lun, lu->retries);
-
- sbp2_agent_reset(lu);
- sbp2_cancel_orbs(lu);
- sbp2_conditionally_unblock(lu);
- out:
- sbp2_target_put(tgt);
-}
-
static void sbp2_update(struct fw_unit *unit)
{
struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
@@ -1277,6 +1200,51 @@
}
}
+static int sbp2_remove(struct device *dev)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ struct fw_device *device = fw_parent_device(unit);
+ struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
+ struct sbp2_logical_unit *lu, *next;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ struct scsi_device *sdev;
+
+ /* prevent deadlocks */
+ sbp2_unblock(tgt);
+
+ list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
+ cancel_delayed_work_sync(&lu->work);
+ sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun));
+ if (sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ }
+ if (lu->login_id != INVALID_LOGIN_ID) {
+ int generation, node_id;
+ /*
+ * tgt->node_id may be obsolete here if we failed
+ * during initial login or after a bus reset where
+ * the topology changed.
+ */
+ generation = device->generation;
+ smp_rmb(); /* node_id vs. generation */
+ node_id = device->node_id;
+ sbp2_send_management_orb(lu, node_id, generation,
+ SBP2_LOGOUT_REQUEST,
+ lu->login_id, NULL);
+ }
+ fw_core_remove_address_handler(&lu->address_handler);
+ list_del(&lu->link);
+ kfree(lu);
+ }
+ scsi_remove_host(shost);
+ fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
+
+ scsi_host_put(shost);
+ return 0;
+}
+
#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
#define SBP2_SW_VERSION_ENTRY 0x00010483
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index eb80b54..8370f72 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -490,8 +490,8 @@
return 0;
}
-static u64 efi_pstore_write(enum pstore_type_id type, unsigned int part,
- size_t size, struct pstore_info *psi)
+static int efi_pstore_write(enum pstore_type_id type, u64 *id,
+ unsigned int part, size_t size, struct pstore_info *psi)
{
char name[DUMP_NAME_LEN];
char stub_name[DUMP_NAME_LEN];
@@ -499,7 +499,7 @@
efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
struct efivars *efivars = psi->data;
struct efivar_entry *entry, *found = NULL;
- int i;
+ int i, ret = 0;
sprintf(stub_name, "dump-type%u-%u-", type, part);
sprintf(name, "%s%lu", stub_name, get_seconds());
@@ -548,18 +548,19 @@
efivar_unregister(found);
if (size)
- efivar_create_sysfs_entry(efivars,
+ ret = efivar_create_sysfs_entry(efivars,
utf16_strsize(efi_name,
DUMP_NAME_LEN * 2),
efi_name, &vendor);
- return part;
+ *id = part;
+ return ret;
};
static int efi_pstore_erase(enum pstore_type_id type, u64 id,
struct pstore_info *psi)
{
- efi_pstore_write(type, id, 0, psi);
+ efi_pstore_write(type, &id, (unsigned int)id, 0, psi);
return 0;
}
@@ -580,8 +581,8 @@
return -1;
}
-static u64 efi_pstore_write(enum pstore_type_id type, unsigned int part,
- size_t size, struct pstore_info *psi)
+static int efi_pstore_write(enum pstore_type_id type, u64 *id,
+ unsigned int part, size_t size, struct pstore_info *psi)
{
return 0;
}
@@ -978,7 +979,7 @@
if (efivars->efi_pstore_info.buf) {
efivars->efi_pstore_info.bufsize = 1024;
efivars->efi_pstore_info.data = efivars;
- mutex_init(&efivars->efi_pstore_info.buf_mutex);
+ spin_lock_init(&efivars->efi_pstore_info.buf_lock);
pstore_register(&efivars->efi_pstore_info);
}
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd..8b3c745 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -178,9 +178,18 @@
The Intel Tunnel Creek processor has 5 GPIOs powered by the
core power rail and 9 from suspend power supply.
+config GPIO_U300
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
- depends on MFD_SUPPORT && PCI
+ depends on PCI
select MFD_CORE
select MFD_VX855
help
@@ -388,6 +397,7 @@
config GPIO_PCH
tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
depends on PCI && X86
+ select GENERIC_IRQ_CHIP
help
This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
which is an IOH(Input/Output Hub) for x86 embedded processor.
@@ -402,6 +412,7 @@
config GPIO_ML_IOH
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
depends on PCI
+ select GENERIC_IRQ_CHIP
help
ML7213 is companion chip for Intel Atom E6xx series.
This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
@@ -417,7 +428,6 @@
config GPIO_RDC321X
tristate "RDC R-321x GPIO support"
depends on PCI
- select MFD_SUPPORT
select MFD_CORE
select MFD_RDC321X
help
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948..19c5d27 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,11 +14,14 @@
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
@@ -37,18 +40,20 @@
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
-
+obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
new file mode 100644
index 0000000..df0d595
--- /dev/null
+++ b/drivers/gpio/gpio-davinci.c
@@ -0,0 +1,455 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006-2007 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+struct davinci_gpio_regs {
+ u32 dir;
+ u32 out_data;
+ u32 set_data;
+ u32 clr_data;
+ u32 in_data;
+ u32 set_rising;
+ u32 clr_rising;
+ u32 set_falling;
+ u32 clr_falling;
+ u32 intstat;
+};
+
+#define chip2controller(chip) \
+ container_of(chip, struct davinci_gpio_controller, chip)
+
+static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static void __iomem *gpio_base;
+
+static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+{
+ void __iomem *ptr;
+
+ if (gpio < 32 * 1)
+ ptr = gpio_base + 0x10;
+ else if (gpio < 32 * 2)
+ ptr = gpio_base + 0x38;
+ else if (gpio < 32 * 3)
+ ptr = gpio_base + 0x60;
+ else if (gpio < 32 * 4)
+ ptr = gpio_base + 0x88;
+ else if (gpio < 32 * 5)
+ ptr = gpio_base + 0xb0;
+ else
+ ptr = NULL;
+ return ptr;
+}
+
+static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
+{
+ struct davinci_gpio_regs __iomem *g;
+
+ g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
+
+ return g;
+}
+
+static int __init davinci_gpio_irq_setup(void);
+
+/*--------------------------------------------------------------------------*/
+
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+ unsigned offset, bool out, int value)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+ unsigned long flags;
+ u32 temp;
+ u32 mask = 1 << offset;
+
+ spin_lock_irqsave(&d->lock, flags);
+ temp = __raw_readl(&g->dir);
+ if (out) {
+ temp &= ~mask;
+ __raw_writel(mask, value ? &g->set_data : &g->clr_data);
+ } else {
+ temp |= mask;
+ }
+ __raw_writel(temp, &g->dir);
+ spin_unlock_irqrestore(&d->lock, flags);
+
+ return 0;
+}
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+ return __davinci_direction(chip, offset, true, value);
+}
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+
+ return (1 << offset) & __raw_readl(&g->in_data);
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+ struct davinci_gpio_regs __iomem *g = d->regs;
+
+ __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+ int i, base;
+ unsigned ngpio;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_gpio_regs *regs;
+
+ if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
+ return 0;
+
+ /*
+ * The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ ngpio = soc_info->gpio_num;
+ if (ngpio == 0) {
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
+ if (WARN_ON(!gpio_base))
+ return -ENOMEM;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+ chips[i].chip.label = "DaVinci";
+
+ chips[i].chip.direction_input = davinci_direction_in;
+ chips[i].chip.get = davinci_gpio_get;
+ chips[i].chip.direction_output = davinci_direction_out;
+ chips[i].chip.set = davinci_gpio_set;
+
+ chips[i].chip.base = base;
+ chips[i].chip.ngpio = ngpio - base;
+ if (chips[i].chip.ngpio > 32)
+ chips[i].chip.ngpio = 32;
+
+ spin_lock_init(&chips[i].lock);
+
+ regs = gpio2regs(base);
+ chips[i].regs = regs;
+ chips[i].set_data = ®s->set_data;
+ chips[i].clr_data = ®s->clr_data;
+ chips[i].in_data = ®s->in_data;
+
+ gpiochip_add(&chips[i].chip);
+ }
+
+ soc_info->gpio_ctlrs = chips;
+ soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+
+ davinci_gpio_irq_setup();
+ return 0;
+}
+pure_initcall(davinci_gpio_setup);
+
+/*--------------------------------------------------------------------------*/
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead.
+ *
+ * All those INTC hookups (direct, plus several IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(struct irq_data *d)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+ __raw_writel(mask, &g->clr_falling);
+ __raw_writel(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(struct irq_data *d)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+ unsigned status = irqd_get_trigger_type(d);
+
+ status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+ if (!status)
+ status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+
+ if (status & IRQ_TYPE_EDGE_FALLING)
+ __raw_writel(mask, &g->set_falling);
+ if (status & IRQ_TYPE_EDGE_RISING)
+ __raw_writel(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
+ .irq_enable = gpio_irq_enable,
+ .irq_disable = gpio_irq_disable,
+ .irq_set_type = gpio_irq_type,
+ .flags = IRQCHIP_SET_TYPE_MASKED,
+};
+
+static void
+gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct davinci_gpio_regs __iomem *g;
+ u32 mask = 0xffff;
+ struct davinci_gpio_controller *d;
+
+ d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+ g = (struct davinci_gpio_regs __iomem *)d->regs;
+
+ /* we only care about one bank */
+ if (irq & 1)
+ mask <<= 16;
+
+ /* temporarily mask (level sensitive) parent IRQ */
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ while (1) {
+ u32 status;
+ int n;
+ int res;
+
+ /* ack any irqs */
+ status = __raw_readl(&g->intstat) & mask;
+ if (!status)
+ break;
+ __raw_writel(status, &g->intstat);
+
+ /* now demux them to the right lowlevel handler */
+ n = d->irq_base;
+ if (irq & 1) {
+ n += 16;
+ status >>= 16;
+ }
+
+ while (status) {
+ res = ffs(status);
+ n += res;
+ generic_handle_irq(n - 1);
+ status >>= res;
+ }
+ }
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ /* now it may re-trigger */
+}
+
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_gpio_controller *d = chip2controller(chip);
+
+ if (d->irq_base >= 0)
+ return d->irq_base + offset;
+ else
+ return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ /* NOTE: we assume for now that only irqs in the first gpio_chip
+ * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+ */
+ if (offset < soc_info->gpio_unbanked)
+ return soc_info->gpio_irq + offset;
+ else
+ return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
+{
+ struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ ? &g->set_falling : &g->clr_falling);
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ ? &g->set_rising : &g->clr_rising);
+
+ return 0;
+}
+
+/*
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * (dm6446) can be set appropriately for GPIOV33 pins.
+ */
+
+static int __init davinci_gpio_irq_setup(void)
+{
+ unsigned gpio, irq, bank;
+ struct clk *clk;
+ u32 binten = 0;
+ unsigned ngpio, bank_irq;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_gpio_regs __iomem *g;
+
+ ngpio = soc_info->gpio_num;
+
+ bank_irq = soc_info->gpio_irq;
+ if (bank_irq == 0) {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
+
+ clk = clk_get(NULL, "gpio");
+ if (IS_ERR(clk)) {
+ printk(KERN_ERR "Error %ld getting gpio clock?\n",
+ PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+ clk_enable(clk);
+
+ /* Arrange gpio_to_irq() support, handling either direct IRQs or
+ * banked IRQs. Having GPIOs in the first GPIO bank use direct
+ * IRQs, while the others use banked IRQs, would need some setup
+ * tweaks to recognize hardware which can do that.
+ */
+ for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+ chips[bank].chip.to_irq = gpio_to_irq_banked;
+ chips[bank].irq_base = soc_info->gpio_unbanked
+ ? -EINVAL
+ : (soc_info->intc_irq_num + gpio);
+ }
+
+ /*
+ * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+ * controller only handling trigger modes. We currently assume no
+ * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+ */
+ if (soc_info->gpio_unbanked) {
+ static struct irq_chip gpio_irqchip_unbanked;
+
+ /* pass "bank 0" GPIO IRQs to AINTC */
+ chips[0].chip.to_irq = gpio_to_irq_unbanked;
+ binten = BIT(0);
+
+ /* AINTC handles mask/unmask; GPIO handles triggering */
+ irq = bank_irq;
+ gpio_irqchip_unbanked = *irq_get_chip(irq);
+ gpio_irqchip_unbanked.name = "GPIO-AINTC";
+ gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
+
+ /* default trigger: both edges */
+ g = gpio2regs(0);
+ __raw_writel(~0, &g->set_falling);
+ __raw_writel(~0, &g->set_rising);
+
+ /* set the direct IRQs up to use that irqchip */
+ for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+ irq_set_chip(irq, &gpio_irqchip_unbanked);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
+ }
+
+ goto done;
+ }
+
+ /*
+ * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+ * then chain through our own handler.
+ */
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
+ unsigned i;
+
+ /* disabled by default, enabled only as needed */
+ g = gpio2regs(gpio);
+ __raw_writel(~0, &g->clr_falling);
+ __raw_writel(~0, &g->clr_rising);
+
+ /* set up all irqs in this bank */
+ irq_set_chained_handler(bank_irq, gpio_irq_handler);
+
+ /*
+ * Each chip handles 32 gpios, and each irq bank consists of 16
+ * gpio irqs. Pass the irq bank's corresponding controller to
+ * the chained irq handler.
+ */
+ irq_set_handler_data(bank_irq, &chips[gpio / 32]);
+
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
+ irq_set_chip(irq, &gpio_irqchip);
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_handler(irq, handle_simple_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ binten |= BIT(bank);
+ }
+
+done:
+ /* BINTEN -- per-bank interrupt enable. genirq would also let these
+ * bits be set/cleared dynamically.
+ */
+ __raw_writel(binten, gpio_base + 0x08);
+
+ printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
+
+ return 0;
+}
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 72fb9c6..7aafbb4 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -23,6 +23,9 @@
#include <linux/basic_mmio_gpio.h>
#include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
struct ep93xx_gpio {
void __iomem *mmio_base;
@@ -307,6 +310,21 @@
return 0;
}
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+ return -EINVAL;
+
+ return 64 + gpio;
+}
+
static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
{
@@ -321,8 +339,10 @@
bgc->gc.label = bank->label;
bgc->gc.base = bank->base;
- if (bank->has_debounce)
+ if (bank->has_debounce) {
bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+ bgc->gc.to_irq = ep93xx_gpio_to_irq;
+ }
return gpiochip_add(&bgc->gc);
}
diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c
new file mode 100644
index 0000000..a3ac66e
--- /dev/null
+++ b/drivers/gpio/gpio-ks8695.c
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-ks8695/gpio.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
+ * Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-ks8695.h>
+
+/*
+ * Configure a GPIO line for either GPIO function, or its internal
+ * function (Interrupt, Timer, etc).
+ */
+static void ks8695_gpio_mode(unsigned int pin, short gpio)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_5) /* only GPIO 0..5 have internal functions */
+ return;
+
+ local_irq_save(flags);
+
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ if (gpio) /* GPIO: set bit to 0 */
+ x &= ~enable[pin];
+ else /* Internal function: set bit to 1 */
+ x |= enable[pin];
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
+
+ local_irq_restore(flags);
+}
+
+
+static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ /* set pin as input */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x &= ~IOPM(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ /* Set IRQ triggering type */
+ irq_set_irq_type(gpio_irq[pin], type);
+
+ /* enable interrupt mode */
+ ks8695_gpio_mode(pin, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(ks8695_gpio_interrupt);
+
+
+
+/* .... Generic GPIO interface .............................................. */
+
+/*
+ * Configure the GPIO line as an input.
+ */
+static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ /* set pin to GPIO mode */
+ ks8695_gpio_mode(pin, 1);
+
+ local_irq_save(flags);
+
+ /* set pin as input */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x &= ~IOPM(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+static int ks8695_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int pin, int state)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ /* set pin to GPIO mode */
+ ks8695_gpio_mode(pin, 1);
+
+ local_irq_save(flags);
+
+ /* set line state */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ if (state)
+ x |= IOPD(pin);
+ else
+ x &= ~IOPD(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+ /* set pin as output */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ x |= IOPM(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+
+/*
+ * Set the state of an output GPIO line.
+ */
+static void ks8695_gpio_set_value(struct gpio_chip *gc,
+ unsigned int pin, int state)
+{
+ unsigned long x, flags;
+
+ if (pin > KS8695_GPIO_15)
+ return;
+
+ local_irq_save(flags);
+
+ /* set output line state */
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ if (state)
+ x |= IOPD(pin);
+ else
+ x &= ~IOPD(pin);
+ __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+ local_irq_restore(flags);
+}
+
+
+/*
+ * Read the state of a GPIO line.
+ */
+static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
+{
+ unsigned long x;
+
+ if (pin > KS8695_GPIO_15)
+ return -EINVAL;
+
+ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+ return (x & IOPD(pin)) != 0;
+}
+
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
+{
+ if (pin > KS8695_GPIO_3) /* only GPIO 0..3 can generate IRQ */
+ return -EINVAL;
+
+ return gpio_irq[pin];
+}
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq)
+{
+ if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3))
+ return -EINVAL;
+
+ return (irq - KS8695_IRQ_EXTERN0);
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+/* GPIOLIB interface */
+
+static struct gpio_chip ks8695_gpio_chip = {
+ .label = "KS8695",
+ .direction_input = ks8695_gpio_direction_input,
+ .direction_output = ks8695_gpio_direction_output,
+ .get = ks8695_gpio_get_value,
+ .set = ks8695_gpio_set_value,
+ .to_irq = ks8695_gpio_to_irq,
+ .base = 0,
+ .ngpio = 16,
+ .can_sleep = 0,
+};
+
+/* Register the GPIOs */
+void ks8695_register_gpios(void)
+{
+ if (gpiochip_add(&ks8695_gpio_chip))
+ printk(KERN_ERR "Unable to register core GPIOs\n");
+}
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+ unsigned long mode, ctrl, data;
+ int i;
+
+ mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+ seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+ for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+ seq_printf(s, "%i:\t", i);
+
+ seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
+
+ if (i <= KS8695_GPIO_3) {
+ if (ctrl & enable[i]) {
+ seq_printf(s, "EXT%i ", i);
+
+ switch ((ctrl & intmask[i]) >> (4 * i)) {
+ case IOPC_TM_LOW:
+ seq_printf(s, "(Low)"); break;
+ case IOPC_TM_HIGH:
+ seq_printf(s, "(High)"); break;
+ case IOPC_TM_RISING:
+ seq_printf(s, "(Rising)"); break;
+ case IOPC_TM_FALLING:
+ seq_printf(s, "(Falling)"); break;
+ case IOPC_TM_EDGE:
+ seq_printf(s, "(Edges)"); break;
+ }
+ }
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else if (i <= KS8695_GPIO_5) {
+ if (ctrl & enable[i])
+ seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else
+ seq_printf(s, "GPIO\t");
+
+ seq_printf(s, "\t");
+
+ seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
+ }
+ return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+ .open = ks8695_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/ks8695_gpio */
+ (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+ return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif
diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
index d2eb57c..00692e8 100644
--- a/drivers/gpio/gpio-langwell.c
+++ b/drivers/gpio/gpio-langwell.c
@@ -59,6 +59,7 @@
GRER, /* rising edge detect */
GFER, /* falling edge detect */
GEDR, /* edge detect result */
+ GAFR, /* alt function */
};
struct lnw_gpio {
@@ -81,6 +82,31 @@
return ptr;
}
+static void __iomem *gpio_reg_2bit(struct gpio_chip *chip, unsigned offset,
+ enum GPIO_REG reg_type)
+{
+ struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+ unsigned nreg = chip->ngpio / 32;
+ u8 reg = offset / 16;
+ void __iomem *ptr;
+
+ ptr = (void __iomem *)(lnw->reg_base + reg_type * nreg * 4 + reg * 4);
+ return ptr;
+}
+
+static int lnw_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *gafr = gpio_reg_2bit(chip, offset, GAFR);
+ u32 value = readl(gafr);
+ int shift = (offset % 16) << 1, af = (value >> shift) & 3;
+
+ if (af) {
+ value &= ~(3 << shift);
+ writel(value, gafr);
+ }
+ return 0;
+}
+
static int lnw_gpio_get(struct gpio_chip *chip, unsigned offset)
{
void __iomem *gplr = gpio_reg(chip, offset, GPLR);
@@ -321,6 +347,7 @@
lnw->reg_base = base;
lnw->irq_base = irq_base;
lnw->chip.label = dev_name(&pdev->dev);
+ lnw->chip.request = lnw_gpio_request;
lnw->chip.direction_input = lnw_gpio_direction_input;
lnw->chip.direction_output = lnw_gpio_direction_output;
lnw->chip.get = lnw_gpio_get;
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
new file mode 100644
index 0000000..5b69480
--- /dev/null
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
+
+#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x) (1 << (x))
+#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x) (1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
+
+struct gpio_regs {
+ void __iomem *inp_state;
+ void __iomem *outp_set;
+ void __iomem *outp_clr;
+ void __iomem *dir_set;
+ void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+ "p0.0", "p0.1", "p0.2", "p0.3",
+ "p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+ "p1.0", "p1.1", "p1.2", "p1.3",
+ "p1.4", "p1.5", "p1.6", "p1.7",
+ "p1.8", "p1.9", "p1.10", "p1.11",
+ "p1.12", "p1.13", "p1.14", "p1.15",
+ "p1.16", "p1.17", "p1.18", "p1.19",
+ "p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+ "p2.0", "p2.1", "p2.2", "p2.3",
+ "p2.4", "p2.5", "p2.6", "p2.7",
+ "p2.8", "p2.9", "p2.10", "p2.11",
+ "p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+ "gpi000", "gpio01", "gpio02", "gpio03",
+ "gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+ "gpi00", "gpi01", "gpi02", "gpi03",
+ "gpi04", "gpi05", "gpi06", "gpi07",
+ "gpi08", "gpi09", NULL, NULL,
+ NULL, NULL, NULL, "gpi15",
+ "gpi16", "gpi17", "gpi18", "gpi19",
+ "gpi20", "gpi21", "gpi22", "gpi23",
+ "gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+ "gpo00", "gpo01", "gpo02", "gpo03",
+ "gpo04", "gpo05", "gpo06", "gpo07",
+ "gpo08", "gpo09", "gpo10", "gpo11",
+ "gpo12", "gpo13", "gpo14", "gpo15",
+ "gpo16", "gpo17", "gpo18", "gpo19",
+ "gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+ .inp_state = LPC32XX_GPIO_P0_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P0_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P0_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+ .inp_state = LPC32XX_GPIO_P1_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P1_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P1_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+ .inp_state = LPC32XX_GPIO_P2_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P2_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P2_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+ .inp_state = LPC32XX_GPIO_P3_INP_STATE,
+ .outp_set = LPC32XX_GPIO_P3_OUTP_SET,
+ .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR,
+ .dir_set = LPC32XX_GPIO_P2_DIR_SET,
+ .dir_clr = LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+ struct gpio_chip chip;
+ struct gpio_regs *gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+ struct gpio_chip *gpc)
+{
+ return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int input)
+{
+ if (input)
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->dir_clr);
+ else
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int input)
+{
+ u32 u = GPIO3_PIN_TO_BIT(pin);
+
+ if (input)
+ __raw_writel(u, group->gpio_grp->dir_clr);
+ else
+ __raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ if (high)
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->outp_set);
+ else
+ __raw_writel(GPIO012_PIN_TO_BIT(pin),
+ group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ u32 u = GPIO3_PIN_TO_BIT(pin);
+
+ if (high)
+ __raw_writel(u, group->gpio_grp->outp_set);
+ else
+ __raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin, int high)
+{
+ if (high)
+ __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+ else
+ __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+ pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ int state = __raw_readl(group->gpio_grp->inp_state);
+
+ /*
+ * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+ * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+ */
+ return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+ unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p012(group, pin, 1);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+ unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p3(group, pin, 1);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+ unsigned pin)
+{
+ return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p012(group, pin, 0);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_dir_p3(group, pin, 0);
+
+ return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+ if (pin < chip->ngpio)
+ return 0;
+
+ return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+ {
+ .chip = {
+ .label = "gpio_p0",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P0_GRP,
+ .ngpio = LPC32XX_GPIO_P0_MAX,
+ .names = gpio_p0_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p0,
+ },
+ {
+ .chip = {
+ .label = "gpio_p1",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P1_GRP,
+ .ngpio = LPC32XX_GPIO_P1_MAX,
+ .names = gpio_p1_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p1,
+ },
+ {
+ .chip = {
+ .label = "gpio_p2",
+ .direction_input = lpc32xx_gpio_dir_input_p012,
+ .get = lpc32xx_gpio_get_value_p012,
+ .direction_output = lpc32xx_gpio_dir_output_p012,
+ .set = lpc32xx_gpio_set_value_p012,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P2_GRP,
+ .ngpio = LPC32XX_GPIO_P2_MAX,
+ .names = gpio_p2_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p2,
+ },
+ {
+ .chip = {
+ .label = "gpio_p3",
+ .direction_input = lpc32xx_gpio_dir_input_p3,
+ .get = lpc32xx_gpio_get_value_p3,
+ .direction_output = lpc32xx_gpio_dir_output_p3,
+ .set = lpc32xx_gpio_set_value_p3,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPIO_P3_GRP,
+ .ngpio = LPC32XX_GPIO_P3_MAX,
+ .names = gpio_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+ {
+ .chip = {
+ .label = "gpi_p3",
+ .direction_input = lpc32xx_gpio_dir_in_always,
+ .get = lpc32xx_gpi_get_value,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPI_P3_GRP,
+ .ngpio = LPC32XX_GPI_P3_MAX,
+ .names = gpi_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+ {
+ .chip = {
+ .label = "gpo_p3",
+ .direction_output = lpc32xx_gpio_dir_out_always,
+ .set = lpc32xx_gpo_set_value,
+ .request = lpc32xx_gpio_request,
+ .base = LPC32XX_GPO_P3_GRP,
+ .ngpio = LPC32XX_GPO_P3_MAX,
+ .names = gpo_p3_names,
+ .can_sleep = 0,
+ },
+ .gpio_grp = &gpio_grp_regs_p3,
+ },
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+ gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index a9016f5..3aa6bee 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -18,6 +18,17 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#define IOH_EDGE_FALLING 0
+#define IOH_EDGE_RISING BIT(0)
+#define IOH_LEVEL_L BIT(1)
+#define IOH_LEVEL_H (BIT(0) | BIT(1))
+#define IOH_EDGE_BOTH BIT(2)
+#define IOH_IM_MASK (BIT(0) | BIT(1) | BIT(2))
+
+#define IOH_IRQ_BASE 0
#define PCI_VENDOR_ID_ROHM 0x10DB
@@ -46,12 +57,22 @@
/**
* struct ioh_gpio_reg_data - The register store data.
+ * @ien_reg To store contents of interrupt enable register.
+ * @imask_reg: To store contents of interrupt mask regist
* @po_reg: To store contents of PO register.
* @pm_reg: To store contents of PM register.
+ * @im0_reg: To store contents of interrupt mode regist0
+ * @im1_reg: To store contents of interrupt mode regist1
+ * @use_sel_reg: To store contents of GPIO_USE_SEL0~3
*/
struct ioh_gpio_reg_data {
+ u32 ien_reg;
+ u32 imask_reg;
u32 po_reg;
u32 pm_reg;
+ u32 im0_reg;
+ u32 im1_reg;
+ u32 use_sel_reg;
};
/**
@@ -62,7 +83,11 @@
* @gpio: Data for GPIO infrastructure.
* @ioh_gpio_reg: Memory mapped Register data is saved here
* when suspend.
+ * @gpio_use_sel: Save GPIO_USE_SEL1~4 register for PM
* @ch: Indicate GPIO channel
+ * @irq_base: Save base of IRQ number for interrupt
+ * @spinlock: Used for register access protection in
+ * interrupt context ioh_irq_type and PM;
*/
struct ioh_gpio {
void __iomem *base;
@@ -70,8 +95,11 @@
struct device *dev;
struct gpio_chip gpio;
struct ioh_gpio_reg_data ioh_gpio_reg;
+ u32 gpio_use_sel;
struct mutex lock;
int ch;
+ int irq_base;
+ spinlock_t spinlock;
};
static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12};
@@ -145,8 +173,25 @@
*/
static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
{
- chip->ioh_gpio_reg.po_reg = ioread32(&chip->reg->regs[chip->ch].po);
- chip->ioh_gpio_reg.pm_reg = ioread32(&chip->reg->regs[chip->ch].pm);
+ int i;
+
+ for (i = 0; i < 8; i ++, chip++) {
+ chip->ioh_gpio_reg.po_reg =
+ ioread32(&chip->reg->regs[chip->ch].po);
+ chip->ioh_gpio_reg.pm_reg =
+ ioread32(&chip->reg->regs[chip->ch].pm);
+ chip->ioh_gpio_reg.ien_reg =
+ ioread32(&chip->reg->regs[chip->ch].ien);
+ chip->ioh_gpio_reg.imask_reg =
+ ioread32(&chip->reg->regs[chip->ch].imask);
+ chip->ioh_gpio_reg.im0_reg =
+ ioread32(&chip->reg->regs[chip->ch].im_0);
+ chip->ioh_gpio_reg.im1_reg =
+ ioread32(&chip->reg->regs[chip->ch].im_1);
+ if (i < 4)
+ chip->ioh_gpio_reg.use_sel_reg =
+ ioread32(&chip->reg->ioh_sel_reg[i]);
+ }
}
/*
@@ -154,13 +199,34 @@
*/
static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
{
- /* to store contents of PO register */
- iowrite32(chip->ioh_gpio_reg.po_reg, &chip->reg->regs[chip->ch].po);
- /* to store contents of PM register */
- iowrite32(chip->ioh_gpio_reg.pm_reg, &chip->reg->regs[chip->ch].pm);
+ int i;
+
+ for (i = 0; i < 8; i ++, chip++) {
+ iowrite32(chip->ioh_gpio_reg.po_reg,
+ &chip->reg->regs[chip->ch].po);
+ iowrite32(chip->ioh_gpio_reg.pm_reg,
+ &chip->reg->regs[chip->ch].pm);
+ iowrite32(chip->ioh_gpio_reg.ien_reg,
+ &chip->reg->regs[chip->ch].ien);
+ iowrite32(chip->ioh_gpio_reg.imask_reg,
+ &chip->reg->regs[chip->ch].imask);
+ iowrite32(chip->ioh_gpio_reg.im0_reg,
+ &chip->reg->regs[chip->ch].im_0);
+ iowrite32(chip->ioh_gpio_reg.im1_reg,
+ &chip->reg->regs[chip->ch].im_1);
+ if (i < 4)
+ iowrite32(chip->ioh_gpio_reg.use_sel_reg,
+ &chip->reg->ioh_sel_reg[i]);
+ }
}
#endif
+static int ioh_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+ struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio);
+ return chip->irq_base + offset;
+}
+
static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
{
struct gpio_chip *gpio = &chip->gpio;
@@ -175,16 +241,148 @@
gpio->base = -1;
gpio->ngpio = num_port;
gpio->can_sleep = 0;
+ gpio->to_irq = ioh_gpio_to_irq;
+}
+
+static int ioh_irq_type(struct irq_data *d, unsigned int type)
+{
+ u32 im;
+ u32 *im_reg;
+ u32 ien;
+ u32 im_pos;
+ int ch;
+ unsigned long flags;
+ u32 val;
+ int irq = d->irq;
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+
+ ch = irq - chip->irq_base;
+ if (irq <= chip->irq_base + 7) {
+ im_reg = &chip->reg->regs[chip->ch].im_0;
+ im_pos = ch;
+ } else {
+ im_reg = &chip->reg->regs[chip->ch].im_1;
+ im_pos = ch - 8;
+ }
+ dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d type=%d\n",
+ __func__, irq, type, ch, im_pos, type);
+
+ spin_lock_irqsave(&chip->spinlock, flags);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ val = IOH_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ val = IOH_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = IOH_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val = IOH_LEVEL_H;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ val = IOH_LEVEL_L;
+ break;
+ case IRQ_TYPE_PROBE:
+ goto end;
+ default:
+ dev_warn(chip->dev, "%s: unknown type(%dd)",
+ __func__, type);
+ goto end;
+ }
+
+ /* Set interrupt mode */
+ im = ioread32(im_reg) & ~(IOH_IM_MASK << (im_pos * 4));
+ iowrite32(im | (val << (im_pos * 4)), im_reg);
+
+ /* iclr */
+ iowrite32(BIT(ch), &chip->reg->regs[chip->ch].iclr);
+
+ /* IMASKCLR */
+ iowrite32(BIT(ch), &chip->reg->regs[chip->ch].imaskclr);
+
+ /* Enable interrupt */
+ ien = ioread32(&chip->reg->regs[chip->ch].ien);
+ iowrite32(ien | BIT(ch), &chip->reg->regs[chip->ch].ien);
+end:
+ spin_unlock_irqrestore(&chip->spinlock, flags);
+
+ return 0;
+}
+
+static void ioh_irq_unmask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+
+ iowrite32(1 << (d->irq - chip->irq_base),
+ &chip->reg->regs[chip->ch].imaskclr);
+}
+
+static void ioh_irq_mask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+
+ iowrite32(1 << (d->irq - chip->irq_base),
+ &chip->reg->regs[chip->ch].imask);
+}
+
+static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
+{
+ struct ioh_gpio *chip = dev_id;
+ u32 reg_val;
+ int i, j;
+ int ret = IRQ_NONE;
+
+ for (i = 0; i < 8; i++) {
+ reg_val = ioread32(&chip->reg->regs[i].istatus);
+ for (j = 0; j < num_ports[i]; j++) {
+ if (reg_val & BIT(j)) {
+ dev_dbg(chip->dev,
+ "%s:[%d]:irq=%d status=0x%x\n",
+ __func__, j, irq, reg_val);
+ iowrite32(BIT(j),
+ &chip->reg->regs[chip->ch].iclr);
+ generic_handle_irq(chip->irq_base + j);
+ ret = IRQ_HANDLED;
+ }
+ }
+ }
+ return ret;
+}
+
+static __devinit void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip,
+ unsigned int irq_start, unsigned int num)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("ioh_gpio", 1, irq_start, chip->base,
+ handle_simple_irq);
+ gc->private = chip;
+ ct = gc->chip_types;
+
+ ct->chip.irq_mask = ioh_irq_mask;
+ ct->chip.irq_unmask = ioh_irq_unmask;
+ ct->chip.irq_set_type = ioh_irq_type;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int ret;
- int i;
+ int i, j;
struct ioh_gpio *chip;
void __iomem *base;
void __iomem *chip_save;
+ int irq_base;
ret = pci_enable_device(pdev);
if (ret) {
@@ -228,10 +426,41 @@
}
chip = chip_save;
+ for (j = 0; j < 8; j++, chip++) {
+ irq_base = irq_alloc_descs(-1, IOH_IRQ_BASE, num_ports[j],
+ NUMA_NO_NODE);
+ if (irq_base < 0) {
+ dev_warn(&pdev->dev,
+ "ml_ioh_gpio: Failed to get IRQ base num\n");
+ chip->irq_base = -1;
+ goto err_irq_alloc_descs;
+ }
+ chip->irq_base = irq_base;
+ ioh_gpio_alloc_generic_chip(chip, irq_base, num_ports[j]);
+ }
+
+ chip = chip_save;
+ ret = request_irq(pdev->irq, ioh_gpio_handler,
+ IRQF_SHARED, KBUILD_MODNAME, chip);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "%s request_irq failed\n", __func__);
+ goto err_request_irq;
+ }
+
pci_set_drvdata(pdev, chip);
return 0;
+err_request_irq:
+ chip = chip_save;
+err_irq_alloc_descs:
+ while (--j >= 0) {
+ chip--;
+ irq_free_descs(chip->irq_base, num_ports[j]);
+ }
+
+ chip = chip_save;
err_gpiochip_add:
while (--i >= 0) {
chip--;
@@ -264,7 +493,11 @@
void __iomem *chip_save;
chip_save = chip;
+
+ free_irq(pdev->irq, chip);
+
for (i = 0; i < 8; i++, chip++) {
+ irq_free_descs(chip->irq_base, num_ports[i]);
err = gpiochip_remove(&chip->gpio);
if (err)
dev_err(&pdev->dev, "Failed gpiochip_remove\n");
@@ -282,9 +515,11 @@
{
s32 ret;
struct ioh_gpio *chip = pci_get_drvdata(pdev);
+ unsigned long flags;
+ spin_lock_irqsave(&chip->spinlock, flags);
ioh_gpio_save_reg_conf(chip);
- ioh_gpio_restore_reg_conf(chip);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
ret = pci_save_state(pdev);
if (ret) {
@@ -304,6 +539,7 @@
{
s32 ret;
struct ioh_gpio *chip = pci_get_drvdata(pdev);
+ unsigned long flags;
ret = pci_enable_wake(pdev, PCI_D0, 0);
@@ -315,9 +551,11 @@
}
pci_restore_state(pdev);
+ spin_lock_irqsave(&chip->spinlock, flags);
iowrite32(0x01, &chip->reg->srst);
iowrite32(0x00, &chip->reg->srst);
ioh_gpio_restore_reg_conf(chip);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 4340aca..b81c989 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -30,6 +30,9 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <asm-generic/bug.h>
+#include <asm/mach/irq.h>
+
+#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
@@ -232,10 +235,15 @@
{
u32 irq_stat;
struct mxc_gpio_port *port = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+
+ chained_irq_enter(chip, desc);
irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
mxc_gpio_irq_handler(port, irq_stat);
+
+ chained_irq_exit(chip, desc);
}
/* MX2 has one interrupt *for all* gpio ports */
@@ -337,6 +345,15 @@
mxc_gpio_hwtype = hwtype;
}
+static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ struct mxc_gpio_port *port =
+ container_of(bgc, struct mxc_gpio_port, bgc);
+
+ return port->virtual_irq_start + offset;
+}
+
static int __devinit mxc_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -403,6 +420,7 @@
if (err)
goto out_iounmap;
+ port->bgc.gc.to_irq = mxc_gpio_to_irq;
port->bgc.gc.base = pdev->id * 32;
port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir);
port->bgc.data = port->bgc.read_reg(port->bgc.reg_set);
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index af55a85..292b504 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -49,6 +49,8 @@
#define GPIO_INT_LEV_MASK (1 << 0)
#define GPIO_INT_POL_MASK (1 << 1)
+#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
+
struct mxs_gpio_port {
void __iomem *base;
int id;
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c7..1ebedfb 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -27,8 +27,9 @@
#include <asm/mach/irq.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
@@ -58,7 +59,6 @@
u32 rwimsc;
u32 fwimsc;
u32 slpm;
- u32 enabled;
u32 pull_up;
};
@@ -276,6 +276,8 @@
if (!chip)
break;
+ clk_enable(chip->clk);
+
slpm[i] = readl(chip->addr + NMK_GPIO_SLPC);
writel(temp, chip->addr + NMK_GPIO_SLPC);
}
@@ -292,6 +294,8 @@
break;
writel(slpm[i], chip->addr + NMK_GPIO_SLPC);
+
+ clk_disable(chip->clk);
}
}
@@ -336,10 +340,12 @@
break;
}
+ clk_enable(nmk_chip->clk);
spin_lock(&nmk_chip->lock);
__nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base,
cfgs[i], sleep, glitch ? slpm : NULL);
spin_unlock(&nmk_chip->lock);
+ clk_disable(nmk_chip->clk);
}
if (glitch)
@@ -424,6 +430,7 @@
if (!nmk_chip)
return -EINVAL;
+ clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
spin_lock(&nmk_chip->lock);
@@ -431,6 +438,7 @@
spin_unlock(&nmk_chip->lock);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+ clk_disable(nmk_chip->clk);
return 0;
}
@@ -457,9 +465,11 @@
if (!nmk_chip)
return -EINVAL;
+ clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_chip->lock, flags);
__nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
+ clk_disable(nmk_chip->clk);
return 0;
}
@@ -483,9 +493,11 @@
if (!nmk_chip)
return -EINVAL;
+ clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_chip->lock, flags);
__nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
+ clk_disable(nmk_chip->clk);
return 0;
}
@@ -502,9 +514,13 @@
bit = 1 << (gpio - nmk_chip->chip.base);
+ clk_enable(nmk_chip->clk);
+
afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+ clk_disable(nmk_chip->clk);
+
return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
}
EXPORT_SYMBOL(nmk_gpio_get_mode);
@@ -525,7 +541,10 @@
nmk_chip = irq_data_get_irq_chip_data(d);
if (!nmk_chip)
return;
+
+ clk_enable(nmk_chip->clk);
writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+ clk_disable(nmk_chip->clk);
}
enum nmk_gpio_irq_type {
@@ -586,11 +605,7 @@
if (!nmk_chip)
return -EINVAL;
- if (enable)
- nmk_chip->enabled |= bitmask;
- else
- nmk_chip->enabled &= ~bitmask;
-
+ clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
spin_lock(&nmk_chip->lock);
@@ -601,6 +616,7 @@
spin_unlock(&nmk_chip->lock);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+ clk_disable(nmk_chip->clk);
return 0;
}
@@ -628,10 +644,11 @@
return -EINVAL;
bitmask = nmk_gpio_get_bitmask(gpio);
+ clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
spin_lock(&nmk_chip->lock);
- if (!(nmk_chip->enabled & bitmask))
+ if (irqd_irq_disabled(d))
__nmk_gpio_set_wake(nmk_chip, gpio, on);
if (on)
@@ -641,13 +658,15 @@
spin_unlock(&nmk_chip->lock);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+ clk_disable(nmk_chip->clk);
return 0;
}
static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
- bool enabled, wake = irqd_is_wakeup_set(d);
+ bool enabled = !irqd_irq_disabled(d);
+ bool wake = irqd_is_wakeup_set(d);
int gpio;
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
@@ -664,8 +683,7 @@
if (type & IRQ_TYPE_LEVEL_LOW)
return -EINVAL;
- enabled = nmk_chip->enabled & bitmask;
-
+ clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_chip->lock, flags);
if (enabled)
@@ -689,10 +707,28 @@
__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
+ clk_disable(nmk_chip->clk);
return 0;
}
+static unsigned int nmk_gpio_irq_startup(struct irq_data *d)
+{
+ struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
+
+ clk_enable(nmk_chip->clk);
+ nmk_gpio_irq_unmask(d);
+ return 0;
+}
+
+static void nmk_gpio_irq_shutdown(struct irq_data *d)
+{
+ struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
+
+ nmk_gpio_irq_mask(d);
+ clk_disable(nmk_chip->clk);
+}
+
static struct irq_chip nmk_gpio_irq_chip = {
.name = "Nomadik-GPIO",
.irq_ack = nmk_gpio_irq_ack,
@@ -700,6 +736,8 @@
.irq_unmask = nmk_gpio_irq_unmask,
.irq_set_type = nmk_gpio_irq_set_type,
.irq_set_wake = nmk_gpio_irq_set_wake,
+ .irq_startup = nmk_gpio_irq_startup,
+ .irq_shutdown = nmk_gpio_irq_shutdown,
};
static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
@@ -726,7 +764,11 @@
static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
- u32 status = readl(nmk_chip->addr + NMK_GPIO_IS);
+ u32 status;
+
+ clk_enable(nmk_chip->clk);
+ status = readl(nmk_chip->addr + NMK_GPIO_IS);
+ clk_disable(nmk_chip->clk);
__nmk_gpio_irq_handler(irq, desc, status);
}
@@ -772,7 +814,12 @@
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
+ clk_enable(nmk_chip->clk);
+
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+
+ clk_disable(nmk_chip->clk);
+
return 0;
}
@@ -781,8 +828,15 @@
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
u32 bit = 1 << offset;
+ int value;
- return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+ clk_enable(nmk_chip->clk);
+
+ value = (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+
+ clk_disable(nmk_chip->clk);
+
+ return value;
}
static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
@@ -791,7 +845,11 @@
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
+ clk_enable(nmk_chip->clk);
+
__nmk_gpio_set_output(nmk_chip, offset, val);
+
+ clk_disable(nmk_chip->clk);
}
static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
@@ -800,8 +858,12 @@
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
+ clk_enable(nmk_chip->clk);
+
__nmk_gpio_make_output(nmk_chip, offset, val);
+ clk_disable(nmk_chip->clk);
+
return 0;
}
@@ -832,6 +894,8 @@
[NMK_GPIO_ALT_C] = "altC",
};
+ clk_enable(nmk_chip->clk);
+
for (i = 0; i < chip->ngpio; i++, gpio++) {
const char *label = gpiochip_is_requested(chip, i);
bool pull;
@@ -876,6 +940,8 @@
seq_printf(s, "\n");
}
+
+ clk_disable(nmk_chip->clk);
}
#else
@@ -893,6 +959,34 @@
.can_sleep = 0,
};
+void nmk_gpio_clocks_enable(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_BANKS; i++) {
+ struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+
+ if (!chip)
+ continue;
+
+ clk_enable(chip->clk);
+ }
+}
+
+void nmk_gpio_clocks_disable(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_BANKS; i++) {
+ struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+
+ if (!chip)
+ continue;
+
+ clk_disable(chip->clk);
+ }
+}
+
/*
* Called from the suspend/resume path to only keep the real wakeup interrupts
* (those that have had set_irq_wake() called on them) as wakeup interrupts,
@@ -912,6 +1006,8 @@
if (!chip)
break;
+ clk_enable(chip->clk);
+
chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC);
chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC);
@@ -926,6 +1022,8 @@
/* 0 -> wakeup enable */
writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC);
}
+
+ clk_disable(chip->clk);
}
}
@@ -939,11 +1037,15 @@
if (!chip)
break;
+ clk_enable(chip->clk);
+
writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
if (chip->sleepmode)
writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
+
+ clk_disable(chip->clk);
}
}
@@ -1010,8 +1112,6 @@
goto out_release;
}
- clk_enable(clk);
-
nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
if (!nmk_chip) {
ret = -ENOMEM;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 118ec12..0e49d87 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,7 +25,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <asm/mach/irq.h>
struct gpio_bank {
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 36919e7..1e8a4a5 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -17,9 +17,17 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
-#define PCH_GPIO_ALL_PINS 0xfff /* Mask for GPIO pins 0 to 11 */
-#define GPIO_NUM_PINS 12 /* Specifies number of GPIO PINS GPIO0-GPIO11 */
+#define PCH_EDGE_FALLING 0
+#define PCH_EDGE_RISING BIT(0)
+#define PCH_LEVEL_L BIT(1)
+#define PCH_LEVEL_H (BIT(0) | BIT(1))
+#define PCH_EDGE_BOTH BIT(2)
+#define PCH_IM_MASK (BIT(0) | BIT(1) | BIT(2))
+
+#define PCH_IRQ_BASE 24
struct pch_regs {
u32 ien;
@@ -33,18 +41,43 @@
u32 pm;
u32 im0;
u32 im1;
- u32 reserved[4];
+ u32 reserved[3];
+ u32 gpio_use_sel;
u32 reset;
};
+enum pch_type_t {
+ INTEL_EG20T_PCH,
+ OKISEMI_ML7223m_IOH, /* OKISEMI ML7223 IOH PCIe Bus-m */
+ OKISEMI_ML7223n_IOH /* OKISEMI ML7223 IOH PCIe Bus-n */
+};
+
+/* Specifies number of GPIO PINS */
+static int gpio_pins[] = {
+ [INTEL_EG20T_PCH] = 12,
+ [OKISEMI_ML7223m_IOH] = 8,
+ [OKISEMI_ML7223n_IOH] = 8,
+};
+
/**
* struct pch_gpio_reg_data - The register store data.
+ * @ien_reg: To store contents of IEN register.
+ * @imask_reg: To store contents of IMASK register.
* @po_reg: To store contents of PO register.
* @pm_reg: To store contents of PM register.
+ * @im0_reg: To store contents of IM0 register.
+ * @im1_reg: To store contents of IM1 register.
+ * @gpio_use_sel_reg : To store contents of GPIO_USE_SEL register.
+ * (Only ML7223 Bus-n)
*/
struct pch_gpio_reg_data {
+ u32 ien_reg;
+ u32 imask_reg;
u32 po_reg;
u32 pm_reg;
+ u32 im0_reg;
+ u32 im1_reg;
+ u32 gpio_use_sel_reg;
};
/**
@@ -55,6 +88,12 @@
* @gpio: Data for GPIO infrastructure.
* @pch_gpio_reg: Memory mapped Register data is saved here
* when suspend.
+ * @lock: Used for register access protection
+ * @irq_base: Save base of IRQ number for interrupt
+ * @ioh: IOH ID
+ * @spinlock: Used for register access protection in
+ * interrupt context pch_irq_mask,
+ * pch_irq_unmask and pch_irq_type;
*/
struct pch_gpio {
void __iomem *base;
@@ -63,6 +102,9 @@
struct gpio_chip gpio;
struct pch_gpio_reg_data pch_gpio_reg;
struct mutex lock;
+ int irq_base;
+ enum pch_type_t ioh;
+ spinlock_t spinlock;
};
static void pch_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
@@ -96,7 +138,7 @@
u32 reg_val;
mutex_lock(&chip->lock);
- pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS;
+ pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1);
pm |= (1 << nr);
iowrite32(pm, &chip->reg->pm);
@@ -118,7 +160,7 @@
u32 pm;
mutex_lock(&chip->lock);
- pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS; /*bits 0-11*/
+ pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1);
pm &= ~(1 << nr);
iowrite32(pm, &chip->reg->pm);
mutex_unlock(&chip->lock);
@@ -131,8 +173,16 @@
*/
static void pch_gpio_save_reg_conf(struct pch_gpio *chip)
{
+ chip->pch_gpio_reg.ien_reg = ioread32(&chip->reg->ien);
+ chip->pch_gpio_reg.imask_reg = ioread32(&chip->reg->imask);
chip->pch_gpio_reg.po_reg = ioread32(&chip->reg->po);
chip->pch_gpio_reg.pm_reg = ioread32(&chip->reg->pm);
+ chip->pch_gpio_reg.im0_reg = ioread32(&chip->reg->im0);
+ if (chip->ioh == INTEL_EG20T_PCH)
+ chip->pch_gpio_reg.im1_reg = ioread32(&chip->reg->im1);
+ if (chip->ioh == OKISEMI_ML7223n_IOH)
+ chip->pch_gpio_reg.gpio_use_sel_reg =\
+ ioread32(&chip->reg->gpio_use_sel);
}
/*
@@ -140,10 +190,24 @@
*/
static void pch_gpio_restore_reg_conf(struct pch_gpio *chip)
{
+ iowrite32(chip->pch_gpio_reg.ien_reg, &chip->reg->ien);
+ iowrite32(chip->pch_gpio_reg.imask_reg, &chip->reg->imask);
/* to store contents of PO register */
iowrite32(chip->pch_gpio_reg.po_reg, &chip->reg->po);
/* to store contents of PM register */
iowrite32(chip->pch_gpio_reg.pm_reg, &chip->reg->pm);
+ iowrite32(chip->pch_gpio_reg.im0_reg, &chip->reg->im0);
+ if (chip->ioh == INTEL_EG20T_PCH)
+ iowrite32(chip->pch_gpio_reg.im1_reg, &chip->reg->im1);
+ if (chip->ioh == OKISEMI_ML7223n_IOH)
+ iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg,
+ &chip->reg->gpio_use_sel);
+}
+
+static int pch_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+ struct pch_gpio *chip = container_of(gpio, struct pch_gpio, gpio);
+ return chip->irq_base + offset;
}
static void pch_gpio_setup(struct pch_gpio *chip)
@@ -158,8 +222,132 @@
gpio->set = pch_gpio_set;
gpio->dbg_show = NULL;
gpio->base = -1;
- gpio->ngpio = GPIO_NUM_PINS;
+ gpio->ngpio = gpio_pins[chip->ioh];
gpio->can_sleep = 0;
+ gpio->to_irq = pch_gpio_to_irq;
+}
+
+static int pch_irq_type(struct irq_data *d, unsigned int type)
+{
+ u32 im;
+ u32 *im_reg;
+ u32 ien;
+ u32 im_pos;
+ int ch;
+ unsigned long flags;
+ u32 val;
+ int irq = d->irq;
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct pch_gpio *chip = gc->private;
+
+ ch = irq - chip->irq_base;
+ if (irq <= chip->irq_base + 7) {
+ im_reg = &chip->reg->im0;
+ im_pos = ch;
+ } else {
+ im_reg = &chip->reg->im1;
+ im_pos = ch - 8;
+ }
+ dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d\n",
+ __func__, irq, type, ch, im_pos);
+
+ spin_lock_irqsave(&chip->spinlock, flags);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ val = PCH_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ val = PCH_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = PCH_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val = PCH_LEVEL_H;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ val = PCH_LEVEL_L;
+ break;
+ case IRQ_TYPE_PROBE:
+ goto end;
+ default:
+ dev_warn(chip->dev, "%s: unknown type(%dd)",
+ __func__, type);
+ goto end;
+ }
+
+ /* Set interrupt mode */
+ im = ioread32(im_reg) & ~(PCH_IM_MASK << (im_pos * 4));
+ iowrite32(im | (val << (im_pos * 4)), im_reg);
+
+ /* iclr */
+ iowrite32(BIT(ch), &chip->reg->iclr);
+
+ /* IMASKCLR */
+ iowrite32(BIT(ch), &chip->reg->imaskclr);
+
+ /* Enable interrupt */
+ ien = ioread32(&chip->reg->ien);
+ iowrite32(ien | BIT(ch), &chip->reg->ien);
+end:
+ spin_unlock_irqrestore(&chip->spinlock, flags);
+
+ return 0;
+}
+
+static void pch_irq_unmask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct pch_gpio *chip = gc->private;
+
+ iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imaskclr);
+}
+
+static void pch_irq_mask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct pch_gpio *chip = gc->private;
+
+ iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imask);
+}
+
+static irqreturn_t pch_gpio_handler(int irq, void *dev_id)
+{
+ struct pch_gpio *chip = dev_id;
+ u32 reg_val = ioread32(&chip->reg->istatus);
+ int i;
+ int ret = IRQ_NONE;
+
+ for (i = 0; i < gpio_pins[chip->ioh]; i++) {
+ if (reg_val & BIT(i)) {
+ dev_dbg(chip->dev, "%s:[%d]:irq=%d status=0x%x\n",
+ __func__, i, irq, reg_val);
+ iowrite32(BIT(i), &chip->reg->iclr);
+ generic_handle_irq(chip->irq_base + i);
+ ret = IRQ_HANDLED;
+ }
+ }
+ return ret;
+}
+
+static __devinit void pch_gpio_alloc_generic_chip(struct pch_gpio *chip,
+ unsigned int irq_start, unsigned int num)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("pch_gpio", 1, irq_start, chip->base,
+ handle_simple_irq);
+ gc->private = chip;
+ ct = gc->chip_types;
+
+ ct->chip.irq_mask = pch_irq_mask;
+ ct->chip.irq_unmask = pch_irq_unmask;
+ ct->chip.irq_set_type = pch_irq_type;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
static int __devinit pch_gpio_probe(struct pci_dev *pdev,
@@ -167,6 +355,7 @@
{
s32 ret;
struct pch_gpio *chip;
+ int irq_base;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
@@ -192,6 +381,13 @@
goto err_iomap;
}
+ if (pdev->device == 0x8803)
+ chip->ioh = INTEL_EG20T_PCH;
+ else if (pdev->device == 0x8014)
+ chip->ioh = OKISEMI_ML7223m_IOH;
+ else if (pdev->device == 0x8043)
+ chip->ioh = OKISEMI_ML7223n_IOH;
+
chip->reg = chip->base;
pci_set_drvdata(pdev, chip);
mutex_init(&chip->lock);
@@ -202,8 +398,36 @@
goto err_gpiochip_add;
}
+ irq_base = irq_alloc_descs(-1, 0, gpio_pins[chip->ioh], NUMA_NO_NODE);
+ if (irq_base < 0) {
+ dev_warn(&pdev->dev, "PCH gpio: Failed to get IRQ base num\n");
+ chip->irq_base = -1;
+ goto end;
+ }
+ chip->irq_base = irq_base;
+
+ ret = request_irq(pdev->irq, pch_gpio_handler,
+ IRQF_SHARED, KBUILD_MODNAME, chip);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "%s request_irq failed\n", __func__);
+ goto err_request_irq;
+ }
+
+ pch_gpio_alloc_generic_chip(chip, irq_base, gpio_pins[chip->ioh]);
+
+ /* Initialize interrupt ien register */
+ iowrite32(0, &chip->reg->ien);
+end:
return 0;
+err_request_irq:
+ irq_free_descs(irq_base, gpio_pins[chip->ioh]);
+
+ ret = gpiochip_remove(&chip->gpio);
+ if (ret)
+ dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
+
err_gpiochip_add:
pci_iounmap(pdev, chip->base);
@@ -224,6 +448,12 @@
int err;
struct pch_gpio *chip = pci_get_drvdata(pdev);
+ if (chip->irq_base != -1) {
+ free_irq(pdev->irq, chip);
+
+ irq_free_descs(chip->irq_base, gpio_pins[chip->ioh]);
+ }
+
err = gpiochip_remove(&chip->gpio);
if (err)
dev_err(&pdev->dev, "Failed gpiochip_remove\n");
@@ -239,9 +469,11 @@
{
s32 ret;
struct pch_gpio *chip = pci_get_drvdata(pdev);
+ unsigned long flags;
+ spin_lock_irqsave(&chip->spinlock, flags);
pch_gpio_save_reg_conf(chip);
- pch_gpio_restore_reg_conf(chip);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
ret = pci_save_state(pdev);
if (ret) {
@@ -261,6 +493,7 @@
{
s32 ret;
struct pch_gpio *chip = pci_get_drvdata(pdev);
+ unsigned long flags;
ret = pci_enable_wake(pdev, PCI_D0, 0);
@@ -272,9 +505,11 @@
}
pci_restore_state(pdev);
+ spin_lock_irqsave(&chip->spinlock, flags);
iowrite32(0x01, &chip->reg->reset);
iowrite32(0x00, &chip->reg->reset);
pch_gpio_restore_reg_conf(chip);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
return 0;
}
@@ -287,6 +522,7 @@
static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 2c5a18f..093c90b 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -118,7 +118,7 @@
{
struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
- if (chip->irq_base == (unsigned) -1)
+ if (chip->irq_base == NO_IRQ)
return -EINVAL;
return chip->irq_base + offset;
@@ -246,6 +246,18 @@
if (chip == NULL)
return -ENOMEM;
+ pdata = dev->dev.platform_data;
+ if (pdata) {
+ chip->gc.base = pdata->gpio_base;
+ chip->irq_base = pdata->irq_base;
+ } else if (dev->dev.of_node) {
+ chip->gc.base = -1;
+ chip->irq_base = NO_IRQ;
+ } else {
+ ret = -ENODEV;
+ goto free_mem;
+ }
+
if (!request_mem_region(dev->res.start,
resource_size(&dev->res), "pl061")) {
ret = -EBUSY;
@@ -267,14 +279,11 @@
chip->gc.get = pl061_get_value;
chip->gc.set = pl061_set_value;
chip->gc.to_irq = pl061_to_irq;
- chip->gc.base = pdata->gpio_base;
chip->gc.ngpio = PL061_GPIO_NR;
chip->gc.label = dev_name(&dev->dev);
chip->gc.dev = &dev->dev;
chip->gc.owner = THIS_MODULE;
- chip->irq_base = pdata->irq_base;
-
ret = gpiochip_add(&chip->gc);
if (ret)
goto iounmap;
@@ -283,7 +292,7 @@
* irq_chip support
*/
- if (chip->irq_base == (unsigned) -1)
+ if (chip->irq_base == NO_IRQ)
return 0;
writeb(0, chip->base + GPIOIE); /* disable irqs */
@@ -307,11 +316,13 @@
list_add(&chip->list, chip_list);
for (i = 0; i < PL061_GPIO_NR; i++) {
- if (pdata->directions & (1 << i))
- pl061_direction_output(&chip->gc, i,
- pdata->values & (1 << i));
- else
- pl061_direction_input(&chip->gc, i);
+ if (pdata) {
+ if (pdata->directions & (1 << i))
+ pl061_direction_output(&chip->gc, i,
+ pdata->values & (1 << i));
+ else
+ pl061_direction_input(&chip->gc, i);
+ }
irq_set_chip_and_handler(i + chip->irq_base, &pl061_irqchip,
handle_simple_irq);
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
new file mode 100644
index 0000000..ee137712
--- /dev/null
+++ b/drivers/gpio/gpio-pxa.c
@@ -0,0 +1,338 @@
+/*
+ * linux/arch/arm/plat-pxa/gpio.c
+ *
+ * Generic PXA GPIO handling
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+#include <linux/slab.h>
+
+#include <mach/gpio-pxa.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+ char label[10];
+
+ unsigned long irq_mask;
+ unsigned long irq_edge_rise;
+ unsigned long irq_edge_fall;
+
+#ifdef CONFIG_PM
+ unsigned long saved_gplr;
+ unsigned long saved_gpdr;
+ unsigned long saved_grer;
+ unsigned long saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c) \
+ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+ return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
+{
+ return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t value, mask = 1 << offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ value = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ value |= mask;
+ else
+ value &= ~mask;
+ __raw_writel(value, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t tmp, mask = 1 << offset;
+ unsigned long flags;
+
+ __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ tmp = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ tmp &= ~mask;
+ else
+ tmp |= mask;
+ __raw_writel(tmp, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ __raw_writel(1 << offset, gpio_chip_base(chip) +
+ (value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+ int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+ struct pxa_gpio_chip *chips;
+
+ chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
+ if (chips == NULL) {
+ pr_err("%s: failed to allocate GPIO chips\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+ struct gpio_chip *c = &chips[i].chip;
+
+ sprintf(chips[i].label, "gpio-%d", i);
+ chips[i].regbase = GPIO_BANK(i);
+
+ c->base = gpio;
+ c->label = chips[i].label;
+
+ c->direction_input = pxa_gpio_direction_input;
+ c->direction_output = pxa_gpio_direction_output;
+ c->get = pxa_gpio_get;
+ c->set = pxa_gpio_set;
+
+ /* number of GPIOs on last bank may be less than 32 */
+ c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+ gpiochip_add(c);
+ }
+ pxa_gpio_chips = chips;
+ return 0;
+}
+
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+ uint32_t grer, gfer;
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer |= c->irq_edge_rise & c->irq_mask;
+ gfer |= c->irq_edge_fall & c->irq_mask;
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+ struct pxa_gpio_chip *c;
+ int gpio = irq_to_gpio(d->irq);
+ unsigned long gpdr, mask = GPIO_bit(gpio);
+
+ c = gpio_to_pxachip(gpio);
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* Don't mess with enabled GPIOs using preconfigured edges or
+ * GPIOs set to alternate function or to output during probe
+ */
+ if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+ return 0;
+
+ if (__gpio_is_occupied(gpio))
+ return 0;
+
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+ if (__gpio_is_inverted(gpio))
+ __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
+ else
+ __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ c->irq_edge_rise |= mask;
+ else
+ c->irq_edge_rise &= ~mask;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ c->irq_edge_fall |= mask;
+ else
+ c->irq_edge_fall &= ~mask;
+
+ update_edge_detect(c);
+
+ pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio,
+ ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
+ ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+ return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct pxa_gpio_chip *c;
+ int loop, gpio, gpio_base, n;
+ unsigned long gedr;
+
+ do {
+ loop = 0;
+ for_each_gpio_chip(gpio, c) {
+ gpio_base = c->chip.base;
+
+ gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+ gedr = gedr & c->irq_mask;
+ __raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+ n = find_first_bit(&gedr, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ loop = 1;
+
+ generic_handle_irq(gpio_to_irq(gpio_base + n));
+ n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+ }
+ }
+ } while (loop);
+}
+
+static void pxa_ack_muxed_gpio(struct irq_data *d)
+{
+ int gpio = irq_to_gpio(d->irq);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+ __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(struct irq_data *d)
+{
+ int gpio = irq_to_gpio(d->irq);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+ uint32_t grer, gfer;
+
+ c->irq_mask &= ~GPIO_bit(gpio);
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(struct irq_data *d)
+{
+ int gpio = irq_to_gpio(d->irq);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+ c->irq_mask |= GPIO_bit(gpio);
+ update_edge_detect(c);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+ .name = "GPIO",
+ .irq_ack = pxa_ack_muxed_gpio,
+ .irq_mask = pxa_mask_muxed_gpio,
+ .irq_unmask = pxa_unmask_muxed_gpio,
+ .irq_set_type = pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+ struct pxa_gpio_chip *c;
+ int gpio, irq;
+
+ pxa_last_gpio = end;
+
+ /* Initialize GPIO chips */
+ pxa_init_gpio_chip(end);
+
+ /* clear all GPIO edge detects */
+ for_each_gpio_chip(gpio, c) {
+ __raw_writel(0, c->regbase + GFER_OFFSET);
+ __raw_writel(0, c->regbase + GRER_OFFSET);
+ __raw_writel(~0,c->regbase + GEDR_OFFSET);
+ }
+
+ for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Install handler for GPIO>=2 edge detect interrupts */
+ irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
+ pxa_muxed_gpio_chip.irq_set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(void)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+ c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+ c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+ c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+ /* Clear GPIO transition detect bits */
+ __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+ }
+ return 0;
+}
+
+static void pxa_gpio_resume(void)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ /* restore level with set/clear */
+ __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+ __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+ __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+ __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+ __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+ }
+}
+#else
+#define pxa_gpio_suspend NULL
+#define pxa_gpio_resume NULL
+#endif
+
+struct syscore_ops pxa_gpio_syscore_ops = {
+ .suspend = pxa_gpio_suspend,
+ .resume = pxa_gpio_resume,
+};
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
new file mode 100644
index 0000000..b6c1f6d
--- /dev/null
+++ b/drivers/gpio/gpio-sa1100.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/mach-sa1100/gpio.c
+ *
+ * Generic SA-1100 GPIO handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <mach/hardware.h>
+
+static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return GPLR & GPIO_GPIO(offset);
+}
+
+static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ GPSR = GPIO_GPIO(offset);
+ else
+ GPCR = GPIO_GPIO(offset);
+}
+
+static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ GPDR &= ~GPIO_GPIO(offset);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ sa1100_gpio_set(chip, offset, value);
+ GPDR |= GPIO_GPIO(offset);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct gpio_chip sa1100_gpio_chip = {
+ .label = "gpio",
+ .direction_input = sa1100_direction_input,
+ .direction_output = sa1100_direction_output,
+ .set = sa1100_gpio_set,
+ .get = sa1100_gpio_get,
+ .base = 0,
+ .ngpio = GPIO_MAX + 1,
+};
+
+void __init sa1100_init_gpio(void)
+{
+ gpiochip_add(&sa1100_gpio_chip);
+}
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 747eb40..61044c8 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -20,13 +20,15 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
#include <asm/mach/irq.h>
+#include <mach/gpio-tegra.h>
#include <mach/iomap.h>
#include <mach/suspend.h>
@@ -34,9 +36,7 @@
#define GPIO_PORT(x) (((x) >> 3) & 0x3)
#define GPIO_BIT(x) ((x) & 0x7)
-#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \
- GPIO_BANK(x) * 0x80 + \
- GPIO_PORT(x) * 4)
+#define GPIO_REG(x) (GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4)
#define GPIO_CNF(x) (GPIO_REG(x) + 0x00)
#define GPIO_OE(x) (GPIO_REG(x) + 0x10)
@@ -75,15 +75,18 @@
};
-static struct tegra_gpio_bank tegra_gpio_banks[] = {
- {.bank = 0, .irq = INT_GPIO1},
- {.bank = 1, .irq = INT_GPIO2},
- {.bank = 2, .irq = INT_GPIO3},
- {.bank = 3, .irq = INT_GPIO4},
- {.bank = 4, .irq = INT_GPIO5},
- {.bank = 5, .irq = INT_GPIO6},
- {.bank = 6, .irq = INT_GPIO7},
-};
+static void __iomem *regs;
+static struct tegra_gpio_bank tegra_gpio_banks[7];
+
+static inline void tegra_gpio_writel(u32 val, u32 reg)
+{
+ __raw_writel(val, regs + reg);
+}
+
+static inline u32 tegra_gpio_readl(u32 reg)
+{
+ return __raw_readl(regs + reg);
+}
static int tegra_gpio_compose(int bank, int port, int bit)
{
@@ -97,7 +100,7 @@
val = 0x100 << GPIO_BIT(gpio);
if (value)
val |= 1 << GPIO_BIT(gpio);
- __raw_writel(val, reg);
+ tegra_gpio_writel(val, reg);
}
void tegra_gpio_enable(int gpio)
@@ -117,7 +120,7 @@
static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+ return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
}
static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -134,7 +137,10 @@
return 0;
}
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return TEGRA_GPIO_TO_IRQ(offset);
+}
static struct gpio_chip tegra_gpio_chip = {
.label = "tegra-gpio",
@@ -142,6 +148,7 @@
.get = tegra_gpio_get,
.direction_output = tegra_gpio_direction_output,
.set = tegra_gpio_set,
+ .to_irq = tegra_gpio_to_irq,
.base = 0,
.ngpio = TEGRA_NR_GPIOS,
};
@@ -150,7 +157,7 @@
{
int gpio = d->irq - INT_GPIO_BASE;
- __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
+ tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
}
static void tegra_gpio_irq_mask(struct irq_data *d)
@@ -203,10 +210,10 @@
spin_lock_irqsave(&bank->lvl_lock[port], flags);
- val = __raw_readl(GPIO_INT_LVL(gpio));
+ val = tegra_gpio_readl(GPIO_INT_LVL(gpio));
val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
val |= lvl_type << GPIO_BIT(gpio);
- __raw_writel(val, GPIO_INT_LVL(gpio));
+ tegra_gpio_writel(val, GPIO_INT_LVL(gpio));
spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
@@ -232,12 +239,12 @@
for (port = 0; port < 4; port++) {
int gpio = tegra_gpio_compose(bank->bank, port, 0);
- unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
- __raw_readl(GPIO_INT_ENB(gpio));
- u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
+ unsigned long sta = tegra_gpio_readl(GPIO_INT_STA(gpio)) &
+ tegra_gpio_readl(GPIO_INT_ENB(gpio));
+ u32 lvl = tegra_gpio_readl(GPIO_INT_LVL(gpio));
for_each_set_bit(pin, &sta, 8) {
- __raw_writel(1 << pin, GPIO_INT_CLR(gpio));
+ tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio));
/* if gpio is edge triggered, clear condition
* before executing the hander so that we don't
@@ -271,11 +278,11 @@
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
unsigned int gpio = (b<<5) | (p<<3);
- __raw_writel(bank->cnf[p], GPIO_CNF(gpio));
- __raw_writel(bank->out[p], GPIO_OUT(gpio));
- __raw_writel(bank->oe[p], GPIO_OE(gpio));
- __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
- __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
+ tegra_gpio_writel(bank->cnf[p], GPIO_CNF(gpio));
+ tegra_gpio_writel(bank->out[p], GPIO_OUT(gpio));
+ tegra_gpio_writel(bank->oe[p], GPIO_OE(gpio));
+ tegra_gpio_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
+ tegra_gpio_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
}
}
@@ -294,11 +301,11 @@
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
unsigned int gpio = (b<<5) | (p<<3);
- bank->cnf[p] = __raw_readl(GPIO_CNF(gpio));
- bank->out[p] = __raw_readl(GPIO_OUT(gpio));
- bank->oe[p] = __raw_readl(GPIO_OE(gpio));
- bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio));
- bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio));
+ bank->cnf[p] = tegra_gpio_readl(GPIO_CNF(gpio));
+ bank->out[p] = tegra_gpio_readl(GPIO_OUT(gpio));
+ bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
+ bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
+ bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
}
}
local_irq_restore(flags);
@@ -328,38 +335,69 @@
*/
static struct lock_class_key gpio_lock_class;
-static int __init tegra_gpio_init(void)
+static int __devinit tegra_gpio_probe(struct platform_device *pdev)
{
+ struct resource *res;
struct tegra_gpio_bank *bank;
+ int gpio;
int i;
int j;
+ for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing IRQ resource\n");
+ return -ENODEV;
+ }
+
+ bank = &tegra_gpio_banks[i];
+ bank->bank = i;
+ bank->irq = res->start;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing MEM resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res),
+ dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev, "Couldn't request MEM resource\n");
+ return -ENODEV;
+ }
+
+ regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!regs) {
+ dev_err(&pdev->dev, "Couldn't ioremap regs\n");
+ return -ENODEV;
+ }
+
for (i = 0; i < 7; i++) {
for (j = 0; j < 4; j++) {
int gpio = tegra_gpio_compose(i, j, 0);
- __raw_writel(0x00, GPIO_INT_ENB(gpio));
+ tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
}
}
#ifdef CONFIG_OF_GPIO
- /*
- * This isn't ideal, but it gets things hooked up until this
- * driver is converted into a platform_device
- */
- tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
- "nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
+ tegra_gpio_chip.of_node = pdev->dev.of_node;
+#endif
gpiochip_add(&tegra_gpio_chip);
- for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
- bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+ for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+ int irq = TEGRA_GPIO_TO_IRQ(gpio);
+ /* No validity check; all Tegra GPIOs are valid IRQs */
- irq_set_lockdep_class(i, &gpio_lock_class);
- irq_set_chip_data(i, bank);
- irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+ bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
+
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_data(irq, bank);
+ irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
handle_simple_irq);
- set_irq_flags(i, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
@@ -375,6 +413,24 @@
return 0;
}
+static struct of_device_id tegra_gpio_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-gpio", },
+ { },
+};
+
+static struct platform_driver tegra_gpio_driver = {
+ .driver = {
+ .name = "tegra-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_gpio_of_match,
+ },
+ .probe = tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+ return platform_driver_register(&tegra_gpio_driver);
+}
postcore_initcall(tegra_gpio_init);
void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
@@ -407,13 +463,13 @@
seq_printf(s,
"%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
i, j,
- __raw_readl(GPIO_CNF(gpio)),
- __raw_readl(GPIO_OE(gpio)),
- __raw_readl(GPIO_OUT(gpio)),
- __raw_readl(GPIO_IN(gpio)),
- __raw_readl(GPIO_INT_STA(gpio)),
- __raw_readl(GPIO_INT_ENB(gpio)),
- __raw_readl(GPIO_INT_LVL(gpio)));
+ tegra_gpio_readl(GPIO_CNF(gpio)),
+ tegra_gpio_readl(GPIO_OE(gpio)),
+ tegra_gpio_readl(GPIO_OUT(gpio)),
+ tegra_gpio_readl(GPIO_IN(gpio)),
+ tegra_gpio_readl(GPIO_INT_STA(gpio)),
+ tegra_gpio_readl(GPIO_INT_ENB(gpio)),
+ tegra_gpio_readl(GPIO_INT_LVL(gpio)));
}
}
return 0;
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
similarity index 100%
rename from arch/arm/mach-davinci/gpio-tnetv107x.c
rename to drivers/gpio/gpio-tnetv107x.c
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
index 53e8255..4035778 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/gpio/gpio-u300.c
@@ -1,18 +1,17 @@
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* This can driver either of the two basic GPIO cores
* available in the U300 platforms:
* COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -21,677 +20,898 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ * is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ * impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN 0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT 0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP 0x1002
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ * low, this is the most typical case and is typically achieved with two
+ * active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ * (open collector) which means it is usually wired with other output
+ * ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ * (open emitter) which is the same as open drain mutatis mutandis but
+ * pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL 0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN 0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE 0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE (0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR (0x00)
+#define U300_335_PXPDOR (0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR (0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV (0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN (0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR (0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR (0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER (0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR (0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE (0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR (0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR (0x04)
+#define U300_571_PXPDOR (0x08)
+#define U300_571_PXPCR (0x0C)
+#define U300_571_PXPER (0x10)
+#define U300_571_PXIEV (0x14)
+#define U300_571_PXIEN (0x18)
+#define U300_571_PXIFR (0x1C)
+#define U300_571_PXICR (0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+ struct gpio_chip chip;
+ struct list_head port_list;
+ struct clk *clk;
+ struct resource *memres;
+ void __iomem *base;
+ struct device *dev;
+ int irq_base;
+ u32 stride;
+ /* Register offsets */
+ u32 pcr;
+ u32 dor;
+ u32 dir;
+ u32 per;
+ u32 icr;
+ u32 ien;
+ u32 iev;
+};
struct u300_gpio_port {
- const char *name;
+ struct list_head node;
+ struct u300_gpio *gpio;
+ char name[8];
int irq;
int number;
+ u8 toggle_edge_mode;
};
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+ (gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
-static struct u300_gpio_port gpio_ports[] = {
- {
- .name = "gpio0",
- .number = 0,
- },
- {
- .name = "gpio1",
- .number = 1,
- },
- {
- .name = "gpio2",
- .number = 2,
- },
-#ifdef U300_COH901571_3
- {
- .name = "gpio3",
- .number = 3,
- },
- {
- .name = "gpio4",
- .number = 4,
- },
-#ifdef CONFIG_MACH_U300_BS335
- {
- .name = "gpio5",
- .number = 5,
- },
- {
- .name = "gpio6",
- .number = 6,
- },
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+ (1 << (pin & 0x07))
+struct u300_gpio_confdata {
+ u16 bias_mode;
+ bool output;
+ int outval;
};
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+ .output = false, \
+}
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW 0
-#define DEFAULT_OUTPUT_HIGH 1
+#define U300_PULL_UP_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+ .output = false, \
+}
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP 0
-#define ENABLE_PULL_UP 1
+#define U300_OUTPUT_LOW { \
+ .output = true, \
+ .outval = 0, \
+}
-#define GPIO_NOT_USED 0
-#define GPIO_IN 1
-#define GPIO_OUT 2
+#define U300_OUTPUT_HIGH { \
+ .output = true, \
+ .outval = 1, \
+}
-struct u300_gpio_configuration_data {
- unsigned char pin_usage;
- unsigned char default_output_value;
- unsigned char pull_up;
-};
/* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 5, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 6, pind 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
}
-#endif
+};
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
/* These 4 pins doesn't exist on DB3210 */
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
}
-#endif
-};
-#endif
-
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
- int (*callback)(void *);
- void *data;
- int users;
};
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
*/
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
{
- if (gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "registered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = func;
- gpio_pin[gpio].data = data;
-
- return 0;
+ return container_of(chip, struct u300_gpio, chip);
}
-EXPORT_SYMBOL(gpio_register_callback);
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- if (!gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "unregistered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = NULL;
- gpio_pin[gpio].data = NULL;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
- return 0;
+ return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
}
-EXPORT_SYMBOL(gpio_unregister_callback);
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- if (number >= 0 &&
- number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
- return 1;
- return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio_pin[gpio].users)
- return -EINVAL;
+ local_irq_save(flags);
+
+ val = readl(U300_PIN_REG(offset, dor));
+ if (value)
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
else
- gpio_pin[gpio].users++;
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
- gpio_users++;
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
- gpio_users--;
- gpio_pin[gpio].users--;
- if (unlikely(gpio_pin[gpio].users < 0)) {
- dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
- gpio);
- gpio_pin[gpio].users = 0;
- }
-
- return;
-}
-EXPORT_SYMBOL(gpio_free);
-
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
- return readl(virtbase + U300_GPIO_PXPDIR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
-{
- u32 val;
- unsigned long flags;
-
- local_irq_save(flags);
- if (value) {
- /* set */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val | (1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- /* clear */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val & ~(1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_set_value);
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin*/
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /* This is not needed since it sets the bits to zero.*/
- /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /* Mask out this pin, note 2 bits per setting */
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
+ u32 oldmode;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+ val = readl(U300_PIN_REG(offset, pcr));
/*
- * FIXME: configure for push/pull, open drain or open source per pin
- * in setup. The current driver will only support push/pull.
+ * Drive mode must be set by the special mode set function, set
+ * push/pull mode by default if no mode has been selected.
*/
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
- << ((gpio & 0x07) << 1));
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- gpio_set_value(gpio, value);
+ oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ /* mode = 0 means input, else some mode is already set */
+ if (oldmode == 0) {
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ }
+ u300_gpio_set(chip, offset, value);
local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_output);
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- u32 val;
- unsigned long flags;
- local_irq_save(flags);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ int retirq = gpio->irq_base + offset;
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val |= (1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- if (edge)
- val |= (1 << (gpio & 0x07));
- else
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+ retirq);
+ return retirq;
}
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
-void disable_irq_on_gpio_pin(unsigned gpio)
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+ u16 param, unsigned long *data)
{
- u32 val;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
+ u32 val;
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
-{
- u32 val;
- unsigned long flags;
-
- local_irq_save(flags);
- if (value) {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_pullup);
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
- struct u300_gpio_port *port = dev_id;
- u32 val;
- int pin;
-
- /* Read event register */
- val = readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask with enable register */
- val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask relevant bits */
- val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
- /* ACK IRQ (clear event) */
- writel(val, virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Print message */
- while (val != 0) {
- unsigned gpio;
-
- pin = __ffs(val);
- /* mask off this pin */
- val &= ~(1 << pin);
- gpio = (port->number << 3) + pin;
-
- if (gpio_pin[gpio].callback)
- (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
- else
- dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
- gpio);
- }
- return IRQ_HANDLED;
-}
-
-static void gpio_set_initial_values(void)
-{
-#ifdef U300_COH901571_3
- int i, j;
- unsigned long flags;
- u32 val;
-
- /* Write default values to all pins */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+ switch (param) {
+ case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+ case GPIO_U300_CONFIG_BIAS_FLOAT:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_BIAS_PULL_UP:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ default:
local_irq_restore(flags);
+ dev_err(gpio->dev, "illegal configuration requested\n");
+ return -EINVAL;
+ }
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct gpio_chip u300_gpio_chip = {
+ .label = "u300-gpio-chip",
+ .owner = THIS_MODULE,
+ .get = u300_gpio_get,
+ .set = u300_gpio_set,
+ .direction_input = u300_gpio_direction_input,
+ .direction_output = u300_gpio_direction_output,
+ .to_irq = u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
+{
+ u32 val;
+
+ val = readl(U300_PIN_REG(offset, icr));
+ /* Set mode depending on state */
+ if (u300_gpio_get(&gpio->chip, offset)) {
+ /* High now, let's trigger on falling edge next then */
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+ offset);
+ } else {
+ /* Low now, let's trigger on rising edge next then */
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+ offset);
+ }
+}
+
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
+ u32 val;
+
+ if ((trigger & IRQF_TRIGGER_RISING) &&
+ (trigger & IRQF_TRIGGER_FALLING)) {
+ /*
+ * The GPIO block can only trigger on falling OR rising edges,
+ * not both. So we need to toggle the mode whenever the pin
+ * goes from one state to the other with a special state flag
+ */
+ dev_dbg(gpio->dev,
+ "trigger on both rising and falling edge on pin %d\n",
+ offset);
+ port->toggle_edge_mode |= U300_PIN_BIT(offset);
+ u300_toggle_trigger(gpio, offset);
+ } else if (trigger & IRQF_TRIGGER_RISING) {
+ dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ } else if (trigger & IRQF_TRIGGER_FALLING) {
+ dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
}
- /*
- * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initialize
- * default value on outputs.
- */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+ return 0;
+}
- if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
- writel(val, virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static void u300_gpio_irq_enable(struct irq_data *d)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
+ u32 val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
+ local_irq_restore(flags);
+}
+
+static void u300_gpio_irq_disable(struct irq_data *d)
+{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
+ u32 val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
+ local_irq_restore(flags);
+}
+
+static struct irq_chip u300_gpio_irqchip = {
+ .name = "u300-gpio-irqchip",
+ .irq_enable = u300_gpio_irq_enable,
+ .irq_disable = u300_gpio_irq_disable,
+ .irq_set_type = u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ struct u300_gpio_port *port = irq_get_handler_data(irq);
+ struct u300_gpio *gpio = port->gpio;
+ int pinoffset = port->number << 3; /* get the right stride */
+ unsigned long val;
+
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ /* Read event register */
+ val = readl(U300_PIN_REG(pinoffset, iev));
+ /* Mask relevant bits */
+ val &= 0xFFU; /* 8 bits per port */
+ /* ACK IRQ (clear event) */
+ writel(val, U300_PIN_REG(pinoffset, iev));
+
+ /* Call IRQ handler */
+ if (val != 0) {
+ int irqoffset;
+
+ for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+ int pin_irq = gpio->irq_base + (port->number << 3)
+ + irqoffset;
+ int offset = pinoffset + irqoffset;
+
+ dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+ pin_irq, offset);
+ generic_handle_irq(pin_irq);
+ /*
+ * Triggering IRQ on both rising and falling edge
+ * needs mockery
+ */
+ if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+ u300_toggle_trigger(gpio, offset);
}
}
- /* Enable or disable the internal pull-ups in the GPIO ASIC block */
- for (i = 0; i < U300_GPIO_MAX; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
- }
-#endif
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
-static int __init gpio_probe(struct platform_device *pdev)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+ int offset,
+ const struct u300_gpio_confdata *conf)
{
- u32 val;
- int err = 0;
- int i;
- int num_irqs;
+ /* Set mode: input or output */
+ if (conf->output) {
+ u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
- gpiodev = &pdev->dev;
- memset(gpio_pin, 0, sizeof(gpio_pin));
+ /* Deactivate bias mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_BIAS_FLOAT,
+ NULL);
+
+ /* Set drive mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+ offset, conf->outval);
+ } else {
+ u300_gpio_direction_input(&gpio->chip, offset);
+
+ /* Always set output low on input pins */
+ u300_gpio_set(&gpio->chip, offset, 0);
+
+ /* Set bias mode for input */
+ u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+ offset, conf->bias_mode);
+ }
+}
+
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+ struct u300_gpio_platform *plat)
+{
+ int i, j;
+
+ /* Write default config and values to all pins */
+ for (i = 0; i < plat->ports; i++) {
+ for (j = 0; j < 8; j++) {
+ const struct u300_gpio_confdata *conf;
+ int offset = (i*8) + j;
+
+ if (plat->variant == U300_GPIO_COH901571_3_BS335)
+ conf = &bs335_gpio_config[i][j];
+ else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+ conf = &bs365_gpio_config[i][j];
+ else
+ break;
+
+ u300_gpio_init_pin(gpio, offset, conf);
+ }
+ }
+}
+
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+ struct u300_gpio_port *port;
+ struct list_head *p, *n;
+
+ list_for_each_safe(p, n, &gpio->port_list) {
+ port = list_entry(p, struct u300_gpio_port, node);
+ list_del(&port->node);
+ free_irq(port->irq, port);
+ kfree(port);
+ }
+}
+
+static int __init u300_gpio_probe(struct platform_device *pdev)
+{
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio;
+ int err = 0;
+ int portno;
+ u32 val;
+ u32 ifr;
+ int i;
+
+ gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+ if (gpio == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ gpio->chip = u300_gpio_chip;
+ gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+ gpio->irq_base = plat->gpio_irq_base;
+ gpio->chip.dev = &pdev->dev;
+ gpio->chip.base = plat->gpio_base;
+ gpio->dev = &pdev->dev;
/* Get GPIO clock */
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- dev_err(gpiodev, "could not get GPIO clock\n");
+ gpio->clk = clk_get(gpio->dev, NULL);
+ if (IS_ERR(gpio->clk)) {
+ err = PTR_ERR(gpio->clk);
+ dev_err(gpio->dev, "could not get GPIO clock\n");
goto err_no_clk;
}
- err = clk_enable(clk);
+ err = clk_enable(gpio->clk);
if (err) {
- dev_err(gpiodev, "could not enable GPIO clock\n");
+ dev_err(gpio->dev, "could not enable GPIO clock\n");
goto err_no_clk_enable;
}
- memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!memres)
+ gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!gpio->memres) {
+ dev_err(gpio->dev, "could not get GPIO memory resource\n");
+ err = -ENODEV;
goto err_no_resource;
+ }
- if (!request_mem_region(memres->start, resource_size(memres),
+ if (!request_mem_region(gpio->memres->start,
+ resource_size(gpio->memres),
"GPIO Controller")) {
err = -ENODEV;
goto err_no_ioregion;
}
- virtbase = ioremap(memres->start, resource_size(memres));
- if (!virtbase) {
+ gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+ if (!gpio->base) {
err = -ENOMEM;
goto err_no_ioremap;
}
- dev_info(gpiodev, "remapped 0x%08x to %p\n",
- memres->start, virtbase);
-#ifdef U300_COH901335
- dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
- /* Turn on the GPIO block */
- writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
+ if (plat->variant == U300_GPIO_COH901335) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 335\n");
+ gpio->stride = U300_335_PORT_STRIDE;
+ gpio->pcr = U300_335_PXPCR;
+ gpio->dor = U300_335_PXPDOR;
+ gpio->dir = U300_335_PXPDIR;
+ gpio->per = U300_335_PXPER;
+ gpio->icr = U300_335_PXICR;
+ gpio->ien = U300_335_PXIEN;
+ gpio->iev = U300_335_PXIEV;
+ ifr = U300_335_PXIFR;
-#ifdef U300_COH901571_3
- dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
- val = readl(virtbase + U300_GPIO_CR);
- dev_info(gpiodev, "COH901571/3 block version: %d, " \
- "number of cores: %d\n",
- ((val & 0x0000FE00) >> 9),
- ((val & 0x000001FC) >> 2));
- writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
+ /* Turn on the GPIO block */
+ writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+ gpio->base + U300_335_CR);
+ } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_571_PORT_STRIDE;
+ gpio->pcr = U300_571_PXPCR;
+ gpio->dor = U300_571_PXPDOR;
+ gpio->dir = U300_571_PXPDIR;
+ gpio->per = U300_571_PXPER;
+ gpio->icr = U300_571_PXICR;
+ gpio->ien = U300_571_PXIEN;
+ gpio->iev = U300_571_PXIEV;
+ ifr = U300_571_PXIFR;
- gpio_set_initial_values();
-
- for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
- gpio_ports[num_irqs].irq =
- platform_get_irq_byname(pdev,
- gpio_ports[num_irqs].name);
-
- err = request_irq(gpio_ports[num_irqs].irq,
- gpio_irq_handler, IRQF_DISABLED,
- gpio_ports[num_irqs].name,
- &gpio_ports[num_irqs]);
- if (err) {
- dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
- gpio_ports[num_irqs].name);
- goto err_no_irq;
- }
- /* Turns off PortX_irq_force */
- writel(0x0, virtbase + U300_GPIO_PXIFR +
- num_irqs * U300_GPIO_PORTX_SPACING);
+ val = readl(gpio->base + U300_571_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_571_CR);
+ u300_gpio_init_coh901571(gpio, plat);
+ } else {
+ dev_err(gpio->dev, "unknown block variant\n");
+ err = -ENODEV;
+ goto err_unknown_variant;
}
+ /* Add each port with its IRQ separately */
+ INIT_LIST_HEAD(&gpio->port_list);
+ for (portno = 0 ; portno < plat->ports; portno++) {
+ struct u300_gpio_port *port =
+ kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+ if (!port) {
+ dev_err(gpio->dev, "out of memory\n");
+ err = -ENOMEM;
+ goto err_no_port;
+ }
+
+ snprintf(port->name, 8, "gpio%d", portno);
+ port->number = portno;
+ port->gpio = gpio;
+
+ port->irq = platform_get_irq_byname(pdev,
+ port->name);
+
+ dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+ port->name);
+
+ irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+ irq_set_handler_data(port->irq, port);
+
+ /* For each GPIO pin set the unique IRQ handler */
+ for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+ int irqno = gpio->irq_base + (portno << 3) + i;
+
+ dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+ irqno, port->name);
+ irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+ handle_simple_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ irq_set_chip_data(irqno, port);
+ }
+
+ /* Turns off irq force (test register) for this port */
+ writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+ list_add_tail(&port->node, &gpio->port_list);
+ }
+ dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+ err = gpiochip_add(&gpio->chip);
+ if (err) {
+ dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+ goto err_no_chip;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
return 0;
- err_no_irq:
- for (i = 0; i < num_irqs; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- err_no_ioremap:
- release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
- clk_disable(clk);
- err_no_clk_enable:
- clk_put(clk);
- err_no_clk:
- dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+ u300_gpio_free_ports(gpio);
+err_unknown_variant:
+ iounmap(gpio->base);
+err_no_ioremap:
+ release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+ clk_disable(gpio->clk);
+err_no_clk_enable:
+ clk_put(gpio->clk);
+err_no_clk:
+ kfree(gpio);
+ dev_info(&pdev->dev, "module ERROR:%d\n", err);
return err;
}
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- int i;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio = platform_get_drvdata(pdev);
+ int err;
/* Turn off the GPIO block */
- writel(0x00000000U, virtbase + U300_GPIO_CR);
- for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- release_mem_region(memres->start, resource_size(memres));
- clk_disable(clk);
- clk_put(clk);
+ if (plat->variant == U300_GPIO_COH901335)
+ writel(0x00000000U, gpio->base + U300_335_CR);
+ if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365)
+ writel(0x00000000U, gpio->base + U300_571_CR);
+
+ err = gpiochip_remove(&gpio->chip);
+ if (err < 0) {
+ dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+ return err;
+ }
+ u300_gpio_free_ports(gpio);
+ iounmap(gpio->base);
+ release_mem_region(gpio->memres->start,
+ resource_size(gpio->memres));
+ clk_disable(gpio->clk);
+ clk_put(gpio->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(gpio);
return 0;
}
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
.driver = {
.name = "u300-gpio",
},
- .remove = __exit_p(gpio_remove),
+ .remove = __exit_p(u300_gpio_remove),
};
static int __init u300_gpio_init(void)
{
- return platform_driver_probe(&gpio_driver, gpio_probe);
+ return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
}
static void __exit u300_gpio_exit(void)
{
- platform_driver_unregister(&gpio_driver);
+ platform_driver_unregister(&u300_gpio_driver);
}
arch_initcall(u300_gpio_init);
module_exit(u300_gpio_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index b493663..785127c 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -158,3 +158,7 @@
help
Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
chipset. If M is selected the module will be called savage.
+
+source "drivers/gpu/drm/exynos/Kconfig"
+
+source "drivers/gpu/drm/vmwgfx/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 89cf05a..c0496f6 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -35,4 +35,5 @@
obj-$(CONFIG_DRM_VMWGFX)+= vmwgfx/
obj-$(CONFIG_DRM_VIA) +=via/
obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/
+obj-$(CONFIG_DRM_EXYNOS) +=exynos/
obj-y += i2c/
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index f88a9b2..f236644 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -372,11 +372,13 @@
encoder_funcs = encoder->helper_private;
if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
adjusted_mode))) {
+ DRM_DEBUG_KMS("Encoder fixup failed\n");
goto done;
}
}
if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
+ DRM_DEBUG_KMS("CRTC fixup failed\n");
goto done;
}
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index 9d2668a..b9dc262 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -107,11 +107,8 @@
ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
root, tmp, &drm_debugfs_fops);
if (!ent) {
- char name[64];
- strncpy(name, root->d_name.name,
- min(root->d_name.len, 64U));
DRM_ERROR("Cannot create /sys/kernel/debug/dri/%s/%s\n",
- name, files[i].name);
+ root->d_name.name, files[i].name);
kfree(tmp);
ret = -1;
goto fail;
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 93a112d..7a87e08 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -438,6 +438,8 @@
goto err_i1;
}
}
+ if (asize > usize)
+ memset(kdata + usize, 0, asize - usize);
}
if (cmd & IOC_IN) {
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7425e5c..fe39c35 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1319,6 +1319,7 @@
#define HDMI_IDENTIFIER 0x000C03
#define AUDIO_BLOCK 0x01
#define VENDOR_BLOCK 0x03
+#define SPEAKER_BLOCK 0x04
#define EDID_BASIC_AUDIO (1 << 6)
/**
@@ -1347,6 +1348,176 @@
}
EXPORT_SYMBOL(drm_find_cea_extension);
+static void
+parse_hdmi_vsdb(struct drm_connector *connector, uint8_t *db)
+{
+ connector->eld[5] |= (db[6] >> 7) << 1; /* Supports_AI */
+
+ connector->dvi_dual = db[6] & 1;
+ connector->max_tmds_clock = db[7] * 5;
+
+ connector->latency_present[0] = db[8] >> 7;
+ connector->latency_present[1] = (db[8] >> 6) & 1;
+ connector->video_latency[0] = db[9];
+ connector->audio_latency[0] = db[10];
+ connector->video_latency[1] = db[11];
+ connector->audio_latency[1] = db[12];
+
+ DRM_LOG_KMS("HDMI: DVI dual %d, "
+ "max TMDS clock %d, "
+ "latency present %d %d, "
+ "video latency %d %d, "
+ "audio latency %d %d\n",
+ connector->dvi_dual,
+ connector->max_tmds_clock,
+ (int) connector->latency_present[0],
+ (int) connector->latency_present[1],
+ connector->video_latency[0],
+ connector->video_latency[1],
+ connector->audio_latency[0],
+ connector->audio_latency[1]);
+}
+
+static void
+monitor_name(struct detailed_timing *t, void *data)
+{
+ if (t->data.other_data.type == EDID_DETAIL_MONITOR_NAME)
+ *(u8 **)data = t->data.other_data.data.str.str;
+}
+
+/**
+ * drm_edid_to_eld - build ELD from EDID
+ * @connector: connector corresponding to the HDMI/DP sink
+ * @edid: EDID to parse
+ *
+ * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver.
+ * Some ELD fields are left to the graphics driver caller:
+ * - Conn_Type
+ * - HDCP
+ * - Port_ID
+ */
+void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
+{
+ uint8_t *eld = connector->eld;
+ u8 *cea;
+ u8 *name;
+ u8 *db;
+ int sad_count = 0;
+ int mnl;
+ int dbl;
+
+ memset(eld, 0, sizeof(connector->eld));
+
+ cea = drm_find_cea_extension(edid);
+ if (!cea) {
+ DRM_DEBUG_KMS("ELD: no CEA Extension found\n");
+ return;
+ }
+
+ name = NULL;
+ drm_for_each_detailed_block((u8 *)edid, monitor_name, &name);
+ for (mnl = 0; name && mnl < 13; mnl++) {
+ if (name[mnl] == 0x0a)
+ break;
+ eld[20 + mnl] = name[mnl];
+ }
+ eld[4] = (cea[1] << 5) | mnl;
+ DRM_DEBUG_KMS("ELD monitor %s\n", eld + 20);
+
+ eld[0] = 2 << 3; /* ELD version: 2 */
+
+ eld[16] = edid->mfg_id[0];
+ eld[17] = edid->mfg_id[1];
+ eld[18] = edid->prod_code[0];
+ eld[19] = edid->prod_code[1];
+
+ for (db = cea + 4; db < cea + cea[2]; db += dbl + 1) {
+ dbl = db[0] & 0x1f;
+
+ switch ((db[0] & 0xe0) >> 5) {
+ case AUDIO_BLOCK: /* Audio Data Block, contains SADs */
+ sad_count = dbl / 3;
+ memcpy(eld + 20 + mnl, &db[1], dbl);
+ break;
+ case SPEAKER_BLOCK: /* Speaker Allocation Data Block */
+ eld[7] = db[1];
+ break;
+ case VENDOR_BLOCK:
+ /* HDMI Vendor-Specific Data Block */
+ if (db[1] == 0x03 && db[2] == 0x0c && db[3] == 0)
+ parse_hdmi_vsdb(connector, db);
+ break;
+ default:
+ break;
+ }
+ }
+ eld[5] |= sad_count << 4;
+ eld[2] = (20 + mnl + sad_count * 3 + 3) / 4;
+
+ DRM_DEBUG_KMS("ELD size %d, SAD count %d\n", (int)eld[2], sad_count);
+}
+EXPORT_SYMBOL(drm_edid_to_eld);
+
+/**
+ * drm_av_sync_delay - HDMI/DP sink audio-video sync delay in millisecond
+ * @connector: connector associated with the HDMI/DP sink
+ * @mode: the display mode
+ */
+int drm_av_sync_delay(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ int i = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+ int a, v;
+
+ if (!connector->latency_present[0])
+ return 0;
+ if (!connector->latency_present[1])
+ i = 0;
+
+ a = connector->audio_latency[i];
+ v = connector->video_latency[i];
+
+ /*
+ * HDMI/DP sink doesn't support audio or video?
+ */
+ if (a == 255 || v == 255)
+ return 0;
+
+ /*
+ * Convert raw EDID values to millisecond.
+ * Treat unknown latency as 0ms.
+ */
+ if (a)
+ a = min(2 * (a - 1), 500);
+ if (v)
+ v = min(2 * (v - 1), 500);
+
+ return max(v - a, 0);
+}
+EXPORT_SYMBOL(drm_av_sync_delay);
+
+/**
+ * drm_select_eld - select one ELD from multiple HDMI/DP sinks
+ * @encoder: the encoder just changed display mode
+ * @mode: the adjusted display mode
+ *
+ * It's possible for one encoder to be associated with multiple HDMI/DP sinks.
+ * The policy is now hard coded to simply use the first HDMI/DP sink's ELD.
+ */
+struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
+ struct drm_display_mode *mode)
+{
+ struct drm_connector *connector;
+ struct drm_device *dev = encoder->dev;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->encoder == encoder && connector->eld[0])
+ return connector;
+
+ return NULL;
+}
+EXPORT_SYMBOL(drm_select_eld);
+
/**
* drm_detect_hdmi_monitor - detect whether monitor is hdmi.
* @edid: monitor EDID information
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 186d62e..396e60c 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -285,6 +285,94 @@
}
EXPORT_SYMBOL(drm_gem_handle_create);
+
+/**
+ * drm_gem_free_mmap_offset - release a fake mmap offset for an object
+ * @obj: obj in question
+ *
+ * This routine frees fake offsets allocated by drm_gem_create_mmap_offset().
+ */
+void
+drm_gem_free_mmap_offset(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_gem_mm *mm = dev->mm_private;
+ struct drm_map_list *list = &obj->map_list;
+
+ drm_ht_remove_item(&mm->offset_hash, &list->hash);
+ drm_mm_put_block(list->file_offset_node);
+ kfree(list->map);
+ list->map = NULL;
+}
+EXPORT_SYMBOL(drm_gem_free_mmap_offset);
+
+/**
+ * drm_gem_create_mmap_offset - create a fake mmap offset for an object
+ * @obj: obj in question
+ *
+ * GEM memory mapping works by handing back to userspace a fake mmap offset
+ * it can use in a subsequent mmap(2) call. The DRM core code then looks
+ * up the object based on the offset and sets up the various memory mapping
+ * structures.
+ *
+ * This routine allocates and attaches a fake offset for @obj.
+ */
+int
+drm_gem_create_mmap_offset(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_gem_mm *mm = dev->mm_private;
+ struct drm_map_list *list;
+ struct drm_local_map *map;
+ int ret = 0;
+
+ /* Set the object up for mmap'ing */
+ list = &obj->map_list;
+ list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL);
+ if (!list->map)
+ return -ENOMEM;
+
+ map = list->map;
+ map->type = _DRM_GEM;
+ map->size = obj->size;
+ map->handle = obj;
+
+ /* Get a DRM GEM mmap offset allocated... */
+ list->file_offset_node = drm_mm_search_free(&mm->offset_manager,
+ obj->size / PAGE_SIZE, 0, 0);
+
+ if (!list->file_offset_node) {
+ DRM_ERROR("failed to allocate offset for bo %d\n", obj->name);
+ ret = -ENOSPC;
+ goto out_free_list;
+ }
+
+ list->file_offset_node = drm_mm_get_block(list->file_offset_node,
+ obj->size / PAGE_SIZE, 0);
+ if (!list->file_offset_node) {
+ ret = -ENOMEM;
+ goto out_free_list;
+ }
+
+ list->hash.key = list->file_offset_node->start;
+ ret = drm_ht_insert_item(&mm->offset_hash, &list->hash);
+ if (ret) {
+ DRM_ERROR("failed to add to map hash\n");
+ goto out_free_mm;
+ }
+
+ return 0;
+
+out_free_mm:
+ drm_mm_put_block(list->file_offset_node);
+out_free_list:
+ kfree(list->map);
+ list->map = NULL;
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_gem_create_mmap_offset);
+
/** Returns a reference to the object named by the handle. */
struct drm_gem_object *
drm_gem_object_lookup(struct drm_device *dev, struct drm_file *filp,
diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c
index 9e5b07ef..0f3c4e3 100644
--- a/drivers/gpu/drm/drm_proc.c
+++ b/drivers/gpu/drm/drm_proc.c
@@ -95,7 +95,6 @@
struct drm_device *dev = minor->dev;
struct proc_dir_entry *ent;
struct drm_info_node *tmp;
- char name[64];
int i, ret;
for (i = 0; i < count; i++) {
@@ -118,7 +117,7 @@
&drm_proc_fops, tmp);
if (!ent) {
DRM_ERROR("Cannot create /proc/dri/%s/%s\n",
- name, files[i].name);
+ root->name, files[i].name);
list_del(&tmp->list);
kfree(tmp);
ret = -1;
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
new file mode 100644
index 0000000..847466a
--- /dev/null
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -0,0 +1,20 @@
+config DRM_EXYNOS
+ tristate "DRM Support for Samsung SoC EXYNOS Series"
+ depends on DRM && PLAT_SAMSUNG
+ default n
+ select DRM_KMS_HELPER
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+ help
+ Choose this option if you have a Samsung SoC EXYNOS chipset.
+ If M is selected the module will be called exynosdrm.
+
+config DRM_EXYNOS_FIMD
+ tristate "Exynos DRM FIMD"
+ depends on DRM_EXYNOS
+ default n
+ help
+ Choose this option if you want to use Exynos FIMD for DRM.
+ If M is selected, the module will be called exynos_drm_fimd
diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
new file mode 100644
index 0000000..0496d3f
--- /dev/null
+++ b/drivers/gpu/drm/exynos/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the drm device driver. This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+
+ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/exynos
+exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o exynos_drm_connector.o \
+ exynos_drm_crtc.o exynos_drm_fbdev.o exynos_drm_fb.o \
+ exynos_drm_buf.o exynos_drm_gem.o exynos_drm_core.o
+
+obj-$(CONFIG_DRM_EXYNOS) += exynosdrm.o
+obj-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o
diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c
new file mode 100644
index 0000000..6f8afea
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c
@@ -0,0 +1,110 @@
+/* exynos_drm_buf.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Author: Inki Dae <inki.dae@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm.h"
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_buf.h"
+
+static DEFINE_MUTEX(exynos_drm_buf_lock);
+
+static int lowlevel_buffer_allocate(struct drm_device *dev,
+ struct exynos_drm_buf_entry *entry)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ entry->vaddr = dma_alloc_writecombine(dev->dev, entry->size,
+ (dma_addr_t *)&entry->paddr, GFP_KERNEL);
+ if (!entry->paddr) {
+ DRM_ERROR("failed to allocate buffer.\n");
+ return -ENOMEM;
+ }
+
+ DRM_DEBUG_KMS("allocated : vaddr(0x%x), paddr(0x%x), size(0x%x)\n",
+ (unsigned int)entry->vaddr, entry->paddr, entry->size);
+
+ return 0;
+}
+
+static void lowlevel_buffer_deallocate(struct drm_device *dev,
+ struct exynos_drm_buf_entry *entry)
+{
+ DRM_DEBUG_KMS("%s.\n", __FILE__);
+
+ if (entry->paddr && entry->vaddr && entry->size)
+ dma_free_writecombine(dev->dev, entry->size, entry->vaddr,
+ entry->paddr);
+ else
+ DRM_DEBUG_KMS("entry data is null.\n");
+}
+
+struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev,
+ unsigned int size)
+{
+ struct exynos_drm_buf_entry *entry;
+
+ DRM_DEBUG_KMS("%s.\n", __FILE__);
+
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry) {
+ DRM_ERROR("failed to allocate exynos_drm_buf_entry.\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ entry->size = size;
+
+ /*
+ * allocate memory region with size and set the memory information
+ * to vaddr and paddr of a entry object.
+ */
+ if (lowlevel_buffer_allocate(dev, entry) < 0) {
+ kfree(entry);
+ entry = NULL;
+ return ERR_PTR(-ENOMEM);
+ }
+
+ return entry;
+}
+
+void exynos_drm_buf_destroy(struct drm_device *dev,
+ struct exynos_drm_buf_entry *entry)
+{
+ DRM_DEBUG_KMS("%s.\n", __FILE__);
+
+ if (!entry) {
+ DRM_DEBUG_KMS("entry is null.\n");
+ return;
+ }
+
+ lowlevel_buffer_deallocate(dev, entry);
+
+ kfree(entry);
+ entry = NULL;
+}
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM Buffer Management Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.h b/drivers/gpu/drm/exynos/exynos_drm_buf.h
new file mode 100644
index 0000000..045d59e
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_buf.h
@@ -0,0 +1,53 @@
+/* exynos_drm_buf.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Author: Inki Dae <inki.dae@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_BUF_H_
+#define _EXYNOS_DRM_BUF_H_
+
+/*
+ * exynos drm buffer entry structure.
+ *
+ * @paddr: physical address of allocated memory.
+ * @vaddr: kernel virtual address of allocated memory.
+ * @size: size of allocated memory.
+ */
+struct exynos_drm_buf_entry {
+ dma_addr_t paddr;
+ void __iomem *vaddr;
+ unsigned int size;
+};
+
+/* allocate physical memory. */
+struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev,
+ unsigned int size);
+
+/* get physical memory information of a drm framebuffer. */
+struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb);
+
+/* remove allocated physical memory. */
+void exynos_drm_buf_destroy(struct drm_device *dev,
+ struct exynos_drm_buf_entry *entry);
+
+#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c
new file mode 100644
index 0000000..985d9e7
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_encoder.h"
+
+#define MAX_EDID 256
+#define to_exynos_connector(x) container_of(x, struct exynos_drm_connector,\
+ drm_connector)
+
+struct exynos_drm_connector {
+ struct drm_connector drm_connector;
+};
+
+/* convert exynos_video_timings to drm_display_mode */
+static inline void
+convert_to_display_mode(struct drm_display_mode *mode,
+ struct fb_videomode *timing)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ mode->clock = timing->pixclock / 1000;
+
+ mode->hdisplay = timing->xres;
+ mode->hsync_start = mode->hdisplay + timing->left_margin;
+ mode->hsync_end = mode->hsync_start + timing->hsync_len;
+ mode->htotal = mode->hsync_end + timing->right_margin;
+
+ mode->vdisplay = timing->yres;
+ mode->vsync_start = mode->vdisplay + timing->upper_margin;
+ mode->vsync_end = mode->vsync_start + timing->vsync_len;
+ mode->vtotal = mode->vsync_end + timing->lower_margin;
+}
+
+/* convert drm_display_mode to exynos_video_timings */
+static inline void
+convert_to_video_timing(struct fb_videomode *timing,
+ struct drm_display_mode *mode)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ memset(timing, 0, sizeof(*timing));
+
+ timing->pixclock = mode->clock * 1000;
+ timing->refresh = mode->vrefresh;
+
+ timing->xres = mode->hdisplay;
+ timing->left_margin = mode->hsync_start - mode->hdisplay;
+ timing->hsync_len = mode->hsync_end - mode->hsync_start;
+ timing->right_margin = mode->htotal - mode->hsync_end;
+
+ timing->yres = mode->vdisplay;
+ timing->upper_margin = mode->vsync_start - mode->vdisplay;
+ timing->vsync_len = mode->vsync_end - mode->vsync_start;
+ timing->lower_margin = mode->vtotal - mode->vsync_end;
+
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ timing->vmode = FB_VMODE_INTERLACED;
+ else
+ timing->vmode = FB_VMODE_NONINTERLACED;
+
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ timing->vmode |= FB_VMODE_DOUBLE;
+}
+
+static int exynos_drm_connector_get_modes(struct drm_connector *connector)
+{
+ struct exynos_drm_manager *manager =
+ exynos_drm_get_manager(connector->encoder);
+ struct exynos_drm_display *display = manager->display;
+ unsigned int count;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (!display) {
+ DRM_DEBUG_KMS("display is null.\n");
+ return 0;
+ }
+
+ /*
+ * if get_edid() exists then get_edid() callback of hdmi side
+ * is called to get edid data through i2c interface else
+ * get timing from the FIMD driver(display controller).
+ *
+ * P.S. in case of lcd panel, count is always 1 if success
+ * because lcd panel has only one mode.
+ */
+ if (display->get_edid) {
+ int ret;
+ void *edid;
+
+ edid = kzalloc(MAX_EDID, GFP_KERNEL);
+ if (!edid) {
+ DRM_ERROR("failed to allocate edid\n");
+ return 0;
+ }
+
+ ret = display->get_edid(manager->dev, connector,
+ edid, MAX_EDID);
+ if (ret < 0) {
+ DRM_ERROR("failed to get edid data.\n");
+ kfree(edid);
+ edid = NULL;
+ return 0;
+ }
+
+ drm_mode_connector_update_edid_property(connector, edid);
+ count = drm_add_edid_modes(connector, edid);
+
+ kfree(connector->display_info.raw_edid);
+ connector->display_info.raw_edid = edid;
+ } else {
+ struct drm_display_mode *mode = drm_mode_create(connector->dev);
+ struct fb_videomode *timing;
+
+ if (display->get_timing)
+ timing = display->get_timing(manager->dev);
+ else {
+ drm_mode_destroy(connector->dev, mode);
+ return 0;
+ }
+
+ convert_to_display_mode(mode, timing);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ count = 1;
+ }
+
+ return count;
+}
+
+static int exynos_drm_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct exynos_drm_manager *manager =
+ exynos_drm_get_manager(connector->encoder);
+ struct exynos_drm_display *display = manager->display;
+ struct fb_videomode timing;
+ int ret = MODE_BAD;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ convert_to_video_timing(&timing, mode);
+
+ if (display && display->check_timing)
+ if (!display->check_timing(manager->dev, (void *)&timing))
+ ret = MODE_OK;
+
+ return ret;
+}
+
+struct drm_encoder *exynos_drm_best_encoder(struct drm_connector *connector)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ return connector->encoder;
+}
+
+static struct drm_connector_helper_funcs exynos_connector_helper_funcs = {
+ .get_modes = exynos_drm_connector_get_modes,
+ .mode_valid = exynos_drm_connector_mode_valid,
+ .best_encoder = exynos_drm_best_encoder,
+};
+
+/* get detection status of display device. */
+static enum drm_connector_status
+exynos_drm_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct exynos_drm_manager *manager =
+ exynos_drm_get_manager(connector->encoder);
+ struct exynos_drm_display *display = manager->display;
+ enum drm_connector_status status = connector_status_disconnected;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (display && display->is_connected) {
+ if (display->is_connected(manager->dev))
+ status = connector_status_connected;
+ else
+ status = connector_status_disconnected;
+ }
+
+ return status;
+}
+
+static void exynos_drm_connector_destroy(struct drm_connector *connector)
+{
+ struct exynos_drm_connector *exynos_connector =
+ to_exynos_connector(connector);
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(exynos_connector);
+}
+
+static struct drm_connector_funcs exynos_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = exynos_drm_connector_detect,
+ .destroy = exynos_drm_connector_destroy,
+};
+
+struct drm_connector *exynos_drm_connector_create(struct drm_device *dev,
+ struct drm_encoder *encoder)
+{
+ struct exynos_drm_connector *exynos_connector;
+ struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+ struct drm_connector *connector;
+ int type;
+ int err;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ exynos_connector = kzalloc(sizeof(*exynos_connector), GFP_KERNEL);
+ if (!exynos_connector) {
+ DRM_ERROR("failed to allocate connector\n");
+ return NULL;
+ }
+
+ connector = &exynos_connector->drm_connector;
+
+ switch (manager->display->type) {
+ case EXYNOS_DISPLAY_TYPE_HDMI:
+ type = DRM_MODE_CONNECTOR_HDMIA;
+ break;
+ default:
+ type = DRM_MODE_CONNECTOR_Unknown;
+ break;
+ }
+
+ drm_connector_init(dev, connector, &exynos_connector_funcs, type);
+ drm_connector_helper_add(connector, &exynos_connector_helper_funcs);
+
+ err = drm_sysfs_connector_add(connector);
+ if (err)
+ goto err_connector;
+
+ connector->encoder = encoder;
+ err = drm_mode_connector_attach_encoder(connector, encoder);
+ if (err) {
+ DRM_ERROR("failed to attach a connector to a encoder\n");
+ goto err_sysfs;
+ }
+
+ DRM_DEBUG_KMS("connector has been created\n");
+
+ return connector;
+
+err_sysfs:
+ drm_sysfs_connector_remove(connector);
+err_connector:
+ drm_connector_cleanup(connector);
+ kfree(exynos_connector);
+ return NULL;
+}
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Seung-Woo Kim <sw0312.kim@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM Connector Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.h b/drivers/gpu/drm/exynos/exynos_drm_connector.h
new file mode 100644
index 0000000..1c7b2b5
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_connector.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_CONNECTOR_H_
+#define _EXYNOS_DRM_CONNECTOR_H_
+
+struct drm_connector *exynos_drm_connector_create(struct drm_device *dev,
+ struct drm_encoder *encoder);
+
+#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c
new file mode 100644
index 0000000..661a035
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_core.c
@@ -0,0 +1,272 @@
+/* exynos_drm_core.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Author:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "exynos_drm_drv.h"
+#include "exynos_drm_encoder.h"
+#include "exynos_drm_connector.h"
+#include "exynos_drm_fbdev.h"
+
+static DEFINE_MUTEX(exynos_drm_mutex);
+static LIST_HEAD(exynos_drm_subdrv_list);
+static struct drm_device *drm_dev;
+
+static int exynos_drm_subdrv_probe(struct drm_device *dev,
+ struct exynos_drm_subdrv *subdrv)
+{
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (subdrv->probe) {
+ int ret;
+
+ /*
+ * this probe callback would be called by sub driver
+ * after setting of all resources to this sub driver,
+ * such as clock, irq and register map are done or by load()
+ * of exynos drm driver.
+ *
+ * P.S. note that this driver is considered for modularization.
+ */
+ ret = subdrv->probe(dev, subdrv->manager.dev);
+ if (ret)
+ return ret;
+ }
+
+ /* create and initialize a encoder for this sub driver. */
+ encoder = exynos_drm_encoder_create(dev, &subdrv->manager,
+ (1 << MAX_CRTC) - 1);
+ if (!encoder) {
+ DRM_ERROR("failed to create encoder\n");
+ return -EFAULT;
+ }
+
+ /*
+ * create and initialize a connector for this sub driver and
+ * attach the encoder created above to the connector.
+ */
+ connector = exynos_drm_connector_create(dev, encoder);
+ if (!connector) {
+ DRM_ERROR("failed to create connector\n");
+ encoder->funcs->destroy(encoder);
+ return -EFAULT;
+ }
+
+ subdrv->encoder = encoder;
+ subdrv->connector = connector;
+
+ return 0;
+}
+
+static void exynos_drm_subdrv_remove(struct drm_device *dev,
+ struct exynos_drm_subdrv *subdrv)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (subdrv->remove)
+ subdrv->remove(dev);
+
+ if (subdrv->encoder) {
+ struct drm_encoder *encoder = subdrv->encoder;
+ encoder->funcs->destroy(encoder);
+ subdrv->encoder = NULL;
+ }
+
+ if (subdrv->connector) {
+ struct drm_connector *connector = subdrv->connector;
+ connector->funcs->destroy(connector);
+ subdrv->connector = NULL;
+ }
+}
+
+int exynos_drm_device_register(struct drm_device *dev)
+{
+ struct exynos_drm_subdrv *subdrv, *n;
+ int err;
+
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (!dev)
+ return -EINVAL;
+
+ if (drm_dev) {
+ DRM_ERROR("Already drm device were registered\n");
+ return -EBUSY;
+ }
+
+ mutex_lock(&exynos_drm_mutex);
+ list_for_each_entry_safe(subdrv, n, &exynos_drm_subdrv_list, list) {
+ err = exynos_drm_subdrv_probe(dev, subdrv);
+ if (err) {
+ DRM_DEBUG("exynos drm subdrv probe failed.\n");
+ list_del(&subdrv->list);
+ }
+ }
+
+ drm_dev = dev;
+ mutex_unlock(&exynos_drm_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(exynos_drm_device_register);
+
+int exynos_drm_device_unregister(struct drm_device *dev)
+{
+ struct exynos_drm_subdrv *subdrv;
+
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (!dev || dev != drm_dev) {
+ WARN(1, "Unexpected drm device unregister!\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&exynos_drm_mutex);
+ list_for_each_entry(subdrv, &exynos_drm_subdrv_list, list)
+ exynos_drm_subdrv_remove(dev, subdrv);
+
+ drm_dev = NULL;
+ mutex_unlock(&exynos_drm_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(exynos_drm_device_unregister);
+
+static int exynos_drm_mode_group_reinit(struct drm_device *dev)
+{
+ struct drm_mode_group *group = &dev->primary->mode_group;
+ uint32_t *id_list = group->id_list;
+ int ret;
+
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ ret = drm_mode_group_init_legacy_group(dev, group);
+ if (ret < 0)
+ return ret;
+
+ kfree(id_list);
+ return 0;
+}
+
+int exynos_drm_subdrv_register(struct exynos_drm_subdrv *subdrv)
+{
+ int err;
+
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (!subdrv)
+ return -EINVAL;
+
+ mutex_lock(&exynos_drm_mutex);
+ if (drm_dev) {
+ err = exynos_drm_subdrv_probe(drm_dev, subdrv);
+ if (err) {
+ DRM_ERROR("failed to probe exynos drm subdrv\n");
+ mutex_unlock(&exynos_drm_mutex);
+ return err;
+ }
+
+ /*
+ * if any specific driver such as fimd or hdmi driver called
+ * exynos_drm_subdrv_register() later than drm_load(),
+ * the fb helper should be re-initialized and re-configured.
+ */
+ err = exynos_drm_fbdev_reinit(drm_dev);
+ if (err) {
+ DRM_ERROR("failed to reinitialize exynos drm fbdev\n");
+ exynos_drm_subdrv_remove(drm_dev, subdrv);
+ mutex_unlock(&exynos_drm_mutex);
+ return err;
+ }
+
+ err = exynos_drm_mode_group_reinit(drm_dev);
+ if (err) {
+ DRM_ERROR("failed to reinitialize mode group\n");
+ exynos_drm_fbdev_fini(drm_dev);
+ exynos_drm_subdrv_remove(drm_dev, subdrv);
+ mutex_unlock(&exynos_drm_mutex);
+ return err;
+ }
+ }
+
+ subdrv->drm_dev = drm_dev;
+
+ list_add_tail(&subdrv->list, &exynos_drm_subdrv_list);
+ mutex_unlock(&exynos_drm_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(exynos_drm_subdrv_register);
+
+int exynos_drm_subdrv_unregister(struct exynos_drm_subdrv *subdrv)
+{
+ int ret = -EFAULT;
+
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (!subdrv) {
+ DRM_DEBUG("Unexpected exynos drm subdrv unregister!\n");
+ return ret;
+ }
+
+ mutex_lock(&exynos_drm_mutex);
+ if (drm_dev) {
+ exynos_drm_subdrv_remove(drm_dev, subdrv);
+ list_del(&subdrv->list);
+
+ /*
+ * fb helper should be updated once a sub driver is released
+ * to re-configure crtc and connector and also to re-setup
+ * drm framebuffer.
+ */
+ ret = exynos_drm_fbdev_reinit(drm_dev);
+ if (ret < 0) {
+ DRM_ERROR("failed fb helper reinit.\n");
+ goto fail;
+ }
+
+ ret = exynos_drm_mode_group_reinit(drm_dev);
+ if (ret < 0) {
+ DRM_ERROR("failed drm mode group reinit.\n");
+ goto fail;
+ }
+ }
+
+fail:
+ mutex_unlock(&exynos_drm_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(exynos_drm_subdrv_unregister);
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Seung-Woo Kim <sw0312.kim@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM Core Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
new file mode 100644
index 0000000..9337e5e
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -0,0 +1,381 @@
+/* exynos_drm_crtc.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_fb.h"
+#include "exynos_drm_encoder.h"
+#include "exynos_drm_buf.h"
+
+#define to_exynos_crtc(x) container_of(x, struct exynos_drm_crtc,\
+ drm_crtc)
+
+/*
+ * Exynos specific crtc postion structure.
+ *
+ * @fb_x: offset x on a framebuffer to be displyed
+ * - the unit is screen coordinates.
+ * @fb_y: offset y on a framebuffer to be displayed
+ * - the unit is screen coordinates.
+ * @crtc_x: offset x on hardware screen.
+ * @crtc_y: offset y on hardware screen.
+ * @crtc_w: width of hardware screen.
+ * @crtc_h: height of hardware screen.
+ */
+struct exynos_drm_crtc_pos {
+ unsigned int fb_x;
+ unsigned int fb_y;
+ unsigned int crtc_x;
+ unsigned int crtc_y;
+ unsigned int crtc_w;
+ unsigned int crtc_h;
+};
+
+/*
+ * Exynos specific crtc structure.
+ *
+ * @drm_crtc: crtc object.
+ * @overlay: contain information common to display controller and hdmi and
+ * contents of this overlay object would be copied to sub driver size.
+ * @pipe: a crtc index created at load() with a new crtc object creation
+ * and the crtc object would be set to private->crtc array
+ * to get a crtc object corresponding to this pipe from private->crtc
+ * array when irq interrupt occured. the reason of using this pipe is that
+ * drm framework doesn't support multiple irq yet.
+ * we can refer to the crtc to current hardware interrupt occured through
+ * this pipe value.
+ */
+struct exynos_drm_crtc {
+ struct drm_crtc drm_crtc;
+ struct exynos_drm_overlay overlay;
+ unsigned int pipe;
+};
+
+static void exynos_drm_crtc_apply(struct drm_crtc *crtc)
+{
+ struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
+ struct exynos_drm_overlay *overlay = &exynos_crtc->overlay;
+
+ exynos_drm_fn_encoder(crtc, overlay,
+ exynos_drm_encoder_crtc_mode_set);
+ exynos_drm_fn_encoder(crtc, NULL, exynos_drm_encoder_crtc_commit);
+}
+
+static int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay,
+ struct drm_framebuffer *fb,
+ struct drm_display_mode *mode,
+ struct exynos_drm_crtc_pos *pos)
+{
+ struct exynos_drm_buf_entry *entry;
+ unsigned int actual_w;
+ unsigned int actual_h;
+
+ entry = exynos_drm_fb_get_buf(fb);
+ if (!entry) {
+ DRM_LOG_KMS("entry is null.\n");
+ return -EFAULT;
+ }
+
+ overlay->paddr = entry->paddr;
+ overlay->vaddr = entry->vaddr;
+
+ DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n",
+ (unsigned long)overlay->vaddr,
+ (unsigned long)overlay->paddr);
+
+ actual_w = min((mode->hdisplay - pos->crtc_x), pos->crtc_w);
+ actual_h = min((mode->vdisplay - pos->crtc_y), pos->crtc_h);
+
+ /* set drm framebuffer data. */
+ overlay->fb_x = pos->fb_x;
+ overlay->fb_y = pos->fb_y;
+ overlay->fb_width = fb->width;
+ overlay->fb_height = fb->height;
+ overlay->bpp = fb->bits_per_pixel;
+ overlay->pitch = fb->pitch;
+
+ /* set overlay range to be displayed. */
+ overlay->crtc_x = pos->crtc_x;
+ overlay->crtc_y = pos->crtc_y;
+ overlay->crtc_width = actual_w;
+ overlay->crtc_height = actual_h;
+
+ /* set drm mode data. */
+ overlay->mode_width = mode->hdisplay;
+ overlay->mode_height = mode->vdisplay;
+ overlay->refresh = mode->vrefresh;
+ overlay->scan_flag = mode->flags;
+
+ DRM_DEBUG_KMS("overlay : offset_x/y(%d,%d), width/height(%d,%d)",
+ overlay->crtc_x, overlay->crtc_y,
+ overlay->crtc_width, overlay->crtc_height);
+
+ return 0;
+}
+
+static int exynos_drm_crtc_update(struct drm_crtc *crtc)
+{
+ struct exynos_drm_crtc *exynos_crtc;
+ struct exynos_drm_overlay *overlay;
+ struct exynos_drm_crtc_pos pos;
+ struct drm_display_mode *mode = &crtc->mode;
+ struct drm_framebuffer *fb = crtc->fb;
+
+ if (!mode || !fb)
+ return -EINVAL;
+
+ exynos_crtc = to_exynos_crtc(crtc);
+ overlay = &exynos_crtc->overlay;
+
+ memset(&pos, 0, sizeof(struct exynos_drm_crtc_pos));
+
+ /* it means the offset of framebuffer to be displayed. */
+ pos.fb_x = crtc->x;
+ pos.fb_y = crtc->y;
+
+ /* OSD position to be displayed. */
+ pos.crtc_x = 0;
+ pos.crtc_y = 0;
+ pos.crtc_w = fb->width - crtc->x;
+ pos.crtc_h = fb->height - crtc->y;
+
+ return exynos_drm_overlay_update(overlay, crtc->fb, mode, &pos);
+}
+
+static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* TODO */
+}
+
+static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* drm framework doesn't check NULL. */
+}
+
+static void exynos_drm_crtc_commit(struct drm_crtc *crtc)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* drm framework doesn't check NULL. */
+}
+
+static bool
+exynos_drm_crtc_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* drm framework doesn't check NULL */
+ return true;
+}
+
+static int
+exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ mode = adjusted_mode;
+
+ return exynos_drm_crtc_update(crtc);
+}
+
+static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ int ret;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ ret = exynos_drm_crtc_update(crtc);
+ if (ret)
+ return ret;
+
+ exynos_drm_crtc_apply(crtc);
+
+ return ret;
+}
+
+static void exynos_drm_crtc_load_lut(struct drm_crtc *crtc)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+ /* drm framework doesn't check NULL */
+}
+
+static struct drm_crtc_helper_funcs exynos_crtc_helper_funcs = {
+ .dpms = exynos_drm_crtc_dpms,
+ .prepare = exynos_drm_crtc_prepare,
+ .commit = exynos_drm_crtc_commit,
+ .mode_fixup = exynos_drm_crtc_mode_fixup,
+ .mode_set = exynos_drm_crtc_mode_set,
+ .mode_set_base = exynos_drm_crtc_mode_set_base,
+ .load_lut = exynos_drm_crtc_load_lut,
+};
+
+static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event)
+{
+ struct drm_device *dev = crtc->dev;
+ struct exynos_drm_private *dev_priv = dev->dev_private;
+ struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
+ struct drm_framebuffer *old_fb = crtc->fb;
+ int ret = -EINVAL;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ mutex_lock(&dev->struct_mutex);
+
+ if (event) {
+ /*
+ * the pipe from user always is 0 so we can set pipe number
+ * of current owner to event.
+ */
+ event->pipe = exynos_crtc->pipe;
+
+ list_add_tail(&event->base.link,
+ &dev_priv->pageflip_event_list);
+
+ ret = drm_vblank_get(dev, exynos_crtc->pipe);
+ if (ret) {
+ DRM_DEBUG("failed to acquire vblank counter\n");
+ list_del(&event->base.link);
+
+ goto out;
+ }
+
+ crtc->fb = fb;
+ ret = exynos_drm_crtc_update(crtc);
+ if (ret) {
+ crtc->fb = old_fb;
+ drm_vblank_put(dev, exynos_crtc->pipe);
+ list_del(&event->base.link);
+
+ goto out;
+ }
+
+ /*
+ * the values related to a buffer of the drm framebuffer
+ * to be applied should be set at here. because these values
+ * first, are set to shadow registers and then to
+ * real registers at vsync front porch period.
+ */
+ exynos_drm_crtc_apply(crtc);
+ }
+out:
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+}
+
+static void exynos_drm_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
+ struct exynos_drm_private *private = crtc->dev->dev_private;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ private->crtc[exynos_crtc->pipe] = NULL;
+
+ drm_crtc_cleanup(crtc);
+ kfree(exynos_crtc);
+}
+
+static struct drm_crtc_funcs exynos_crtc_funcs = {
+ .set_config = drm_crtc_helper_set_config,
+ .page_flip = exynos_drm_crtc_page_flip,
+ .destroy = exynos_drm_crtc_destroy,
+};
+
+struct exynos_drm_overlay *get_exynos_drm_overlay(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
+
+ return &exynos_crtc->overlay;
+}
+
+int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr)
+{
+ struct exynos_drm_crtc *exynos_crtc;
+ struct exynos_drm_private *private = dev->dev_private;
+ struct drm_crtc *crtc;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ exynos_crtc = kzalloc(sizeof(*exynos_crtc), GFP_KERNEL);
+ if (!exynos_crtc) {
+ DRM_ERROR("failed to allocate exynos crtc\n");
+ return -ENOMEM;
+ }
+
+ exynos_crtc->pipe = nr;
+ crtc = &exynos_crtc->drm_crtc;
+
+ private->crtc[nr] = crtc;
+
+ drm_crtc_init(dev, crtc, &exynos_crtc_funcs);
+ drm_crtc_helper_add(crtc, &exynos_crtc_helper_funcs);
+
+ return 0;
+}
+
+int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int crtc)
+{
+ struct exynos_drm_private *private = dev->dev_private;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ exynos_drm_fn_encoder(private->crtc[crtc], &crtc,
+ exynos_drm_enable_vblank);
+
+ return 0;
+}
+
+void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int crtc)
+{
+ struct exynos_drm_private *private = dev->dev_private;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ exynos_drm_fn_encoder(private->crtc[crtc], &crtc,
+ exynos_drm_disable_vblank);
+}
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Seung-Woo Kim <sw0312.kim@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM CRTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.h b/drivers/gpu/drm/exynos/exynos_drm_crtc.h
new file mode 100644
index 0000000..c584042
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.h
@@ -0,0 +1,38 @@
+/* exynos_drm_crtc.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_CRTC_H_
+#define _EXYNOS_DRM_CRTC_H_
+
+struct exynos_drm_overlay *get_exynos_drm_overlay(struct drm_device *dev,
+ struct drm_crtc *crtc);
+int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr);
+int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int crtc);
+void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int crtc);
+
+#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
new file mode 100644
index 0000000..83810cb
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm.h"
+
+#include <drm/exynos_drm.h>
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_crtc.h"
+#include "exynos_drm_fbdev.h"
+#include "exynos_drm_fb.h"
+#include "exynos_drm_gem.h"
+
+#define DRIVER_NAME "exynos-drm"
+#define DRIVER_DESC "Samsung SoC DRM"
+#define DRIVER_DATE "20110530"
+#define DRIVER_MAJOR 1
+#define DRIVER_MINOR 0
+
+static int exynos_drm_load(struct drm_device *dev, unsigned long flags)
+{
+ struct exynos_drm_private *private;
+ int ret;
+ int nr;
+
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ private = kzalloc(sizeof(struct exynos_drm_private), GFP_KERNEL);
+ if (!private) {
+ DRM_ERROR("failed to allocate private\n");
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&private->pageflip_event_list);
+ dev->dev_private = (void *)private;
+
+ drm_mode_config_init(dev);
+
+ exynos_drm_mode_config_init(dev);
+
+ /*
+ * EXYNOS4 is enough to have two CRTCs and each crtc would be used
+ * without dependency of hardware.
+ */
+ for (nr = 0; nr < MAX_CRTC; nr++) {
+ ret = exynos_drm_crtc_create(dev, nr);
+ if (ret)
+ goto err_crtc;
+ }
+
+ ret = drm_vblank_init(dev, MAX_CRTC);
+ if (ret)
+ goto err_crtc;
+
+ /*
+ * probe sub drivers such as display controller and hdmi driver,
+ * that were registered at probe() of platform driver
+ * to the sub driver and create encoder and connector for them.
+ */
+ ret = exynos_drm_device_register(dev);
+ if (ret)
+ goto err_vblank;
+
+ /*
+ * create and configure fb helper and also exynos specific
+ * fbdev object.
+ */
+ ret = exynos_drm_fbdev_init(dev);
+ if (ret) {
+ DRM_ERROR("failed to initialize drm fbdev\n");
+ goto err_drm_device;
+ }
+
+ return 0;
+
+err_drm_device:
+ exynos_drm_device_unregister(dev);
+err_vblank:
+ drm_vblank_cleanup(dev);
+err_crtc:
+ drm_mode_config_cleanup(dev);
+ kfree(private);
+
+ return ret;
+}
+
+static int exynos_drm_unload(struct drm_device *dev)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ exynos_drm_fbdev_fini(dev);
+ exynos_drm_device_unregister(dev);
+ drm_vblank_cleanup(dev);
+ drm_mode_config_cleanup(dev);
+ kfree(dev->dev_private);
+
+ dev->dev_private = NULL;
+
+ return 0;
+}
+
+static void exynos_drm_preclose(struct drm_device *dev,
+ struct drm_file *file_priv)
+{
+ struct exynos_drm_private *dev_priv = dev->dev_private;
+
+ /*
+ * drm framework frees all events at release time,
+ * so private event list should be cleared.
+ */
+ if (!list_empty(&dev_priv->pageflip_event_list))
+ INIT_LIST_HEAD(&dev_priv->pageflip_event_list);
+}
+
+static void exynos_drm_lastclose(struct drm_device *dev)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ exynos_drm_fbdev_restore_mode(dev);
+}
+
+static struct vm_operations_struct exynos_drm_gem_vm_ops = {
+ .fault = exynos_drm_gem_fault,
+ .open = drm_gem_vm_open,
+ .close = drm_gem_vm_close,
+};
+
+static struct drm_ioctl_desc exynos_ioctls[] = {
+ DRM_IOCTL_DEF_DRV(EXYNOS_GEM_CREATE, exynos_drm_gem_create_ioctl,
+ DRM_UNLOCKED | DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(EXYNOS_GEM_MAP_OFFSET,
+ exynos_drm_gem_map_offset_ioctl, DRM_UNLOCKED |
+ DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(EXYNOS_GEM_MMAP,
+ exynos_drm_gem_mmap_ioctl, DRM_UNLOCKED | DRM_AUTH),
+};
+
+static struct drm_driver exynos_drm_driver = {
+ .driver_features = DRIVER_HAVE_IRQ | DRIVER_BUS_PLATFORM |
+ DRIVER_MODESET | DRIVER_GEM,
+ .load = exynos_drm_load,
+ .unload = exynos_drm_unload,
+ .preclose = exynos_drm_preclose,
+ .lastclose = exynos_drm_lastclose,
+ .get_vblank_counter = drm_vblank_count,
+ .enable_vblank = exynos_drm_crtc_enable_vblank,
+ .disable_vblank = exynos_drm_crtc_disable_vblank,
+ .gem_init_object = exynos_drm_gem_init_object,
+ .gem_free_object = exynos_drm_gem_free_object,
+ .gem_vm_ops = &exynos_drm_gem_vm_ops,
+ .dumb_create = exynos_drm_gem_dumb_create,
+ .dumb_map_offset = exynos_drm_gem_dumb_map_offset,
+ .dumb_destroy = exynos_drm_gem_dumb_destroy,
+ .ioctls = exynos_ioctls,
+ .fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .mmap = exynos_drm_gem_mmap,
+ .poll = drm_poll,
+ .read = drm_read,
+ .unlocked_ioctl = drm_ioctl,
+ .release = drm_release,
+ },
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+};
+
+static int exynos_drm_platform_probe(struct platform_device *pdev)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ exynos_drm_driver.num_ioctls = DRM_ARRAY_SIZE(exynos_ioctls);
+
+ return drm_platform_init(&exynos_drm_driver, pdev);
+}
+
+static int exynos_drm_platform_remove(struct platform_device *pdev)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ drm_platform_exit(&exynos_drm_driver, pdev);
+
+ return 0;
+}
+
+static struct platform_driver exynos_drm_platform_driver = {
+ .probe = exynos_drm_platform_probe,
+ .remove = __devexit_p(exynos_drm_platform_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init exynos_drm_init(void)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ return platform_driver_register(&exynos_drm_platform_driver);
+}
+
+static void __exit exynos_drm_exit(void)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ platform_driver_unregister(&exynos_drm_platform_driver);
+}
+
+module_init(exynos_drm_init);
+module_exit(exynos_drm_exit);
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Seung-Woo Kim <sw0312.kim@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
new file mode 100644
index 0000000..c03683f
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -0,0 +1,254 @@
+/* exynos_drm_drv.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_DRV_H_
+#define _EXYNOS_DRM_DRV_H_
+
+#include "drm.h"
+
+#define MAX_CRTC 2
+
+struct drm_device;
+struct exynos_drm_overlay;
+struct drm_connector;
+
+/* this enumerates display type. */
+enum exynos_drm_output_type {
+ EXYNOS_DISPLAY_TYPE_NONE,
+ /* RGB or CPU Interface. */
+ EXYNOS_DISPLAY_TYPE_LCD,
+ /* HDMI Interface. */
+ EXYNOS_DISPLAY_TYPE_HDMI,
+};
+
+/*
+ * Exynos drm overlay ops structure.
+ *
+ * @mode_set: copy drm overlay info to hw specific overlay info.
+ * @commit: apply hardware specific overlay data to registers.
+ * @disable: disable hardware specific overlay.
+ */
+struct exynos_drm_overlay_ops {
+ void (*mode_set)(struct device *subdrv_dev,
+ struct exynos_drm_overlay *overlay);
+ void (*commit)(struct device *subdrv_dev);
+ void (*disable)(struct device *subdrv_dev);
+};
+
+/*
+ * Exynos drm common overlay structure.
+ *
+ * @fb_x: offset x on a framebuffer to be displayed.
+ * - the unit is screen coordinates.
+ * @fb_y: offset y on a framebuffer to be displayed.
+ * - the unit is screen coordinates.
+ * @fb_width: width of a framebuffer.
+ * @fb_height: height of a framebuffer.
+ * @crtc_x: offset x on hardware screen.
+ * @crtc_y: offset y on hardware screen.
+ * @crtc_width: window width to be displayed (hardware screen).
+ * @crtc_height: window height to be displayed (hardware screen).
+ * @mode_width: width of screen mode.
+ * @mode_height: height of screen mode.
+ * @refresh: refresh rate.
+ * @scan_flag: interlace or progressive way.
+ * (it could be DRM_MODE_FLAG_*)
+ * @bpp: pixel size.(in bit)
+ * @paddr: bus(accessed by dma) physical memory address to this overlay
+ * and this is physically continuous.
+ * @vaddr: virtual memory addresss to this overlay.
+ * @default_win: a window to be enabled.
+ * @color_key: color key on or off.
+ * @index_color: if using color key feature then this value would be used
+ * as index color.
+ * @local_path: in case of lcd type, local path mode on or off.
+ * @transparency: transparency on or off.
+ * @activated: activated or not.
+ *
+ * this structure is common to exynos SoC and its contents would be copied
+ * to hardware specific overlay info.
+ */
+struct exynos_drm_overlay {
+ unsigned int fb_x;
+ unsigned int fb_y;
+ unsigned int fb_width;
+ unsigned int fb_height;
+ unsigned int crtc_x;
+ unsigned int crtc_y;
+ unsigned int crtc_width;
+ unsigned int crtc_height;
+ unsigned int mode_width;
+ unsigned int mode_height;
+ unsigned int refresh;
+ unsigned int scan_flag;
+ unsigned int bpp;
+ unsigned int pitch;
+ dma_addr_t paddr;
+ void __iomem *vaddr;
+
+ bool default_win;
+ bool color_key;
+ unsigned int index_color;
+ bool local_path;
+ bool transparency;
+ bool activated;
+};
+
+/*
+ * Exynos DRM Display Structure.
+ * - this structure is common to analog tv, digital tv and lcd panel.
+ *
+ * @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
+ * @is_connected: check for that display is connected or not.
+ * @get_edid: get edid modes from display driver.
+ * @get_timing: get timing object from display driver.
+ * @check_timing: check if timing is valid or not.
+ * @power_on: display device on or off.
+ */
+struct exynos_drm_display {
+ enum exynos_drm_output_type type;
+ bool (*is_connected)(struct device *dev);
+ int (*get_edid)(struct device *dev, struct drm_connector *connector,
+ u8 *edid, int len);
+ void *(*get_timing)(struct device *dev);
+ int (*check_timing)(struct device *dev, void *timing);
+ int (*power_on)(struct device *dev, int mode);
+};
+
+/*
+ * Exynos drm manager ops
+ *
+ * @mode_set: convert drm_display_mode to hw specific display mode and
+ * would be called by encoder->mode_set().
+ * @commit: set current hw specific display mode to hw.
+ * @enable_vblank: specific driver callback for enabling vblank interrupt.
+ * @disable_vblank: specific driver callback for disabling vblank interrupt.
+ */
+struct exynos_drm_manager_ops {
+ void (*mode_set)(struct device *subdrv_dev, void *mode);
+ void (*commit)(struct device *subdrv_dev);
+ int (*enable_vblank)(struct device *subdrv_dev);
+ void (*disable_vblank)(struct device *subdrv_dev);
+};
+
+/*
+ * Exynos drm common manager structure.
+ *
+ * @dev: pointer to device object for subdrv device driver.
+ * sub drivers such as display controller or hdmi driver,
+ * have their own device object.
+ * @ops: pointer to callbacks for exynos drm specific framebuffer.
+ * these callbacks should be set by specific drivers such fimd
+ * or hdmi driver and are used to control hardware global registers.
+ * @overlay_ops: pointer to callbacks for exynos drm specific framebuffer.
+ * these callbacks should be set by specific drivers such fimd
+ * or hdmi driver and are used to control hardware overlay reigsters.
+ * @display: pointer to callbacks for exynos drm specific framebuffer.
+ * these callbacks should be set by specific drivers such fimd
+ * or hdmi driver and are used to control display devices such as
+ * analog tv, digital tv and lcd panel and also get timing data for them.
+ */
+struct exynos_drm_manager {
+ struct device *dev;
+ int pipe;
+ struct exynos_drm_manager_ops *ops;
+ struct exynos_drm_overlay_ops *overlay_ops;
+ struct exynos_drm_display *display;
+};
+
+/*
+ * Exynos drm private structure.
+ */
+struct exynos_drm_private {
+ struct drm_fb_helper *fb_helper;
+
+ /* list head for new event to be added. */
+ struct list_head pageflip_event_list;
+
+ /*
+ * created crtc object would be contained at this array and
+ * this array is used to be aware of which crtc did it request vblank.
+ */
+ struct drm_crtc *crtc[MAX_CRTC];
+};
+
+/*
+ * Exynos drm sub driver structure.
+ *
+ * @list: sub driver has its own list object to register to exynos drm driver.
+ * @drm_dev: pointer to drm_device and this pointer would be set
+ * when sub driver calls exynos_drm_subdrv_register().
+ * @probe: this callback would be called by exynos drm driver after
+ * subdrv is registered to it.
+ * @remove: this callback is used to release resources created
+ * by probe callback.
+ * @manager: subdrv has its own manager to control a hardware appropriately
+ * and we can access a hardware drawing on this manager.
+ * @encoder: encoder object owned by this sub driver.
+ * @connector: connector object owned by this sub driver.
+ */
+struct exynos_drm_subdrv {
+ struct list_head list;
+ struct drm_device *drm_dev;
+
+ int (*probe)(struct drm_device *drm_dev, struct device *dev);
+ void (*remove)(struct drm_device *dev);
+
+ struct exynos_drm_manager manager;
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+};
+
+/*
+ * this function calls a probe callback registered to sub driver list and
+ * create its own encoder and connector and then set drm_device object
+ * to global one.
+ */
+int exynos_drm_device_register(struct drm_device *dev);
+/*
+ * this function calls a remove callback registered to sub driver list and
+ * destroy its own encoder and connetor.
+ */
+int exynos_drm_device_unregister(struct drm_device *dev);
+
+/*
+ * this function would be called by sub drivers such as display controller
+ * or hdmi driver to register this sub driver object to exynos drm driver
+ * and when a sub driver is registered to exynos drm driver a probe callback
+ * of the sub driver is called and creates its own encoder and connector
+ * and then fb helper and drm mode group would be re-initialized.
+ */
+int exynos_drm_subdrv_register(struct exynos_drm_subdrv *drm_subdrv);
+
+/*
+ * this function removes subdrv list from exynos drm driver and fb helper
+ * and drm mode group would be re-initialized.
+ */
+int exynos_drm_subdrv_unregister(struct exynos_drm_subdrv *drm_subdrv);
+
+#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
new file mode 100644
index 0000000..7cf6fa8
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
@@ -0,0 +1,271 @@
+/* exynos_drm_encoder.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_crtc.h"
+#include "exynos_drm_encoder.h"
+
+#define to_exynos_encoder(x) container_of(x, struct exynos_drm_encoder,\
+ drm_encoder)
+
+/*
+ * exynos specific encoder structure.
+ *
+ * @drm_encoder: encoder object.
+ * @manager: specific encoder has its own manager to control a hardware
+ * appropriately and we can access a hardware drawing on this manager.
+ */
+struct exynos_drm_encoder {
+ struct drm_encoder drm_encoder;
+ struct exynos_drm_manager *manager;
+};
+
+static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_connector *connector;
+ struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+
+ DRM_DEBUG_KMS("%s, encoder dpms: %d\n", __FILE__, mode);
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if (connector->encoder == encoder) {
+ struct exynos_drm_display *display = manager->display;
+
+ if (display && display->power_on)
+ display->power_on(manager->dev, mode);
+ }
+ }
+}
+
+static bool
+exynos_drm_encoder_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* drm framework doesn't check NULL. */
+
+ return true;
+}
+
+static void exynos_drm_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_connector *connector;
+ struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+ struct exynos_drm_manager_ops *manager_ops = manager->ops;
+ struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
+ struct exynos_drm_overlay *overlay = get_exynos_drm_overlay(dev,
+ encoder->crtc);
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ mode = adjusted_mode;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if (connector->encoder == encoder) {
+ if (manager_ops && manager_ops->mode_set)
+ manager_ops->mode_set(manager->dev, mode);
+
+ if (overlay_ops && overlay_ops->mode_set)
+ overlay_ops->mode_set(manager->dev, overlay);
+ }
+ }
+}
+
+static void exynos_drm_encoder_prepare(struct drm_encoder *encoder)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* drm framework doesn't check NULL. */
+}
+
+static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
+{
+ struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+ struct exynos_drm_manager_ops *manager_ops = manager->ops;
+ struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (manager_ops && manager_ops->commit)
+ manager_ops->commit(manager->dev);
+
+ if (overlay_ops && overlay_ops->commit)
+ overlay_ops->commit(manager->dev);
+}
+
+static struct drm_crtc *
+exynos_drm_encoder_get_crtc(struct drm_encoder *encoder)
+{
+ return encoder->crtc;
+}
+
+static struct drm_encoder_helper_funcs exynos_encoder_helper_funcs = {
+ .dpms = exynos_drm_encoder_dpms,
+ .mode_fixup = exynos_drm_encoder_mode_fixup,
+ .mode_set = exynos_drm_encoder_mode_set,
+ .prepare = exynos_drm_encoder_prepare,
+ .commit = exynos_drm_encoder_commit,
+ .get_crtc = exynos_drm_encoder_get_crtc,
+};
+
+static void exynos_drm_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct exynos_drm_encoder *exynos_encoder =
+ to_exynos_encoder(encoder);
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ exynos_encoder->manager->pipe = -1;
+
+ drm_encoder_cleanup(encoder);
+ encoder->dev->mode_config.num_encoder--;
+ kfree(exynos_encoder);
+}
+
+static struct drm_encoder_funcs exynos_encoder_funcs = {
+ .destroy = exynos_drm_encoder_destroy,
+};
+
+struct drm_encoder *
+exynos_drm_encoder_create(struct drm_device *dev,
+ struct exynos_drm_manager *manager,
+ unsigned int possible_crtcs)
+{
+ struct drm_encoder *encoder;
+ struct exynos_drm_encoder *exynos_encoder;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (!manager || !possible_crtcs)
+ return NULL;
+
+ if (!manager->dev)
+ return NULL;
+
+ exynos_encoder = kzalloc(sizeof(*exynos_encoder), GFP_KERNEL);
+ if (!exynos_encoder) {
+ DRM_ERROR("failed to allocate encoder\n");
+ return NULL;
+ }
+
+ exynos_encoder->manager = manager;
+ encoder = &exynos_encoder->drm_encoder;
+ encoder->possible_crtcs = possible_crtcs;
+
+ DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
+
+ drm_encoder_init(dev, encoder, &exynos_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS);
+
+ drm_encoder_helper_add(encoder, &exynos_encoder_helper_funcs);
+
+ DRM_DEBUG_KMS("encoder has been created\n");
+
+ return encoder;
+}
+
+struct exynos_drm_manager *exynos_drm_get_manager(struct drm_encoder *encoder)
+{
+ return to_exynos_encoder(encoder)->manager;
+}
+
+void exynos_drm_fn_encoder(struct drm_crtc *crtc, void *data,
+ void (*fn)(struct drm_encoder *, void *))
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ if (encoder->crtc != crtc)
+ continue;
+
+ fn(encoder, data);
+ }
+}
+
+void exynos_drm_enable_vblank(struct drm_encoder *encoder, void *data)
+{
+ struct exynos_drm_manager *manager =
+ to_exynos_encoder(encoder)->manager;
+ struct exynos_drm_manager_ops *manager_ops = manager->ops;
+ int crtc = *(int *)data;
+
+ if (manager->pipe == -1)
+ manager->pipe = crtc;
+
+ if (manager_ops->enable_vblank)
+ manager_ops->enable_vblank(manager->dev);
+}
+
+void exynos_drm_disable_vblank(struct drm_encoder *encoder, void *data)
+{
+ struct exynos_drm_manager *manager =
+ to_exynos_encoder(encoder)->manager;
+ struct exynos_drm_manager_ops *manager_ops = manager->ops;
+ int crtc = *(int *)data;
+
+ if (manager->pipe == -1)
+ manager->pipe = crtc;
+
+ if (manager_ops->disable_vblank)
+ manager_ops->disable_vblank(manager->dev);
+}
+
+void exynos_drm_encoder_crtc_commit(struct drm_encoder *encoder, void *data)
+{
+ struct exynos_drm_manager *manager =
+ to_exynos_encoder(encoder)->manager;
+ struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
+
+ overlay_ops->commit(manager->dev);
+}
+
+void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data)
+{
+ struct exynos_drm_manager *manager =
+ to_exynos_encoder(encoder)->manager;
+ struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
+ struct exynos_drm_overlay *overlay = data;
+
+ overlay_ops->mode_set(manager->dev, overlay);
+}
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Seung-Woo Kim <sw0312.kim@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM Encoder Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
new file mode 100644
index 0000000..5ecd645
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_ENCODER_H_
+#define _EXYNOS_DRM_ENCODER_H_
+
+struct exynos_drm_manager;
+
+struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev,
+ struct exynos_drm_manager *mgr,
+ unsigned int possible_crtcs);
+struct exynos_drm_manager *
+exynos_drm_get_manager(struct drm_encoder *encoder);
+void exynos_drm_fn_encoder(struct drm_crtc *crtc, void *data,
+ void (*fn)(struct drm_encoder *, void *));
+void exynos_drm_enable_vblank(struct drm_encoder *encoder, void *data);
+void exynos_drm_disable_vblank(struct drm_encoder *encoder, void *data);
+void exynos_drm_encoder_crtc_commit(struct drm_encoder *encoder, void *data);
+void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data);
+
+#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c
new file mode 100644
index 0000000..48d29cf
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c
@@ -0,0 +1,265 @@
+/* exynos_drm_fb.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+#include "exynos_drm_fb.h"
+#include "exynos_drm_buf.h"
+#include "exynos_drm_gem.h"
+
+#define to_exynos_fb(x) container_of(x, struct exynos_drm_fb, fb)
+
+/*
+ * exynos specific framebuffer structure.
+ *
+ * @fb: drm framebuffer obejct.
+ * @exynos_gem_obj: exynos specific gem object containing a gem object.
+ * @entry: pointer to exynos drm buffer entry object.
+ * - containing only the information to physically continuous memory
+ * region allocated at default framebuffer creation.
+ */
+struct exynos_drm_fb {
+ struct drm_framebuffer fb;
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+ struct exynos_drm_buf_entry *entry;
+};
+
+static void exynos_drm_fb_destroy(struct drm_framebuffer *fb)
+{
+ struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb);
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ drm_framebuffer_cleanup(fb);
+
+ /*
+ * default framebuffer has no gem object so
+ * a buffer of the default framebuffer should be released at here.
+ */
+ if (!exynos_fb->exynos_gem_obj && exynos_fb->entry)
+ exynos_drm_buf_destroy(fb->dev, exynos_fb->entry);
+
+ kfree(exynos_fb);
+ exynos_fb = NULL;
+}
+
+static int exynos_drm_fb_create_handle(struct drm_framebuffer *fb,
+ struct drm_file *file_priv,
+ unsigned int *handle)
+{
+ struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb);
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ return drm_gem_handle_create(file_priv,
+ &exynos_fb->exynos_gem_obj->base, handle);
+}
+
+static int exynos_drm_fb_dirty(struct drm_framebuffer *fb,
+ struct drm_file *file_priv, unsigned flags,
+ unsigned color, struct drm_clip_rect *clips,
+ unsigned num_clips)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* TODO */
+
+ return 0;
+}
+
+static struct drm_framebuffer_funcs exynos_drm_fb_funcs = {
+ .destroy = exynos_drm_fb_destroy,
+ .create_handle = exynos_drm_fb_create_handle,
+ .dirty = exynos_drm_fb_dirty,
+};
+
+static struct drm_framebuffer *
+exynos_drm_fb_init(struct drm_file *file_priv, struct drm_device *dev,
+ struct drm_mode_fb_cmd *mode_cmd)
+{
+ struct exynos_drm_fb *exynos_fb;
+ struct drm_framebuffer *fb;
+ struct exynos_drm_gem_obj *exynos_gem_obj = NULL;
+ struct drm_gem_object *obj;
+ unsigned int size;
+ int ret;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ mode_cmd->pitch = max(mode_cmd->pitch,
+ mode_cmd->width * (mode_cmd->bpp >> 3));
+
+ DRM_LOG_KMS("drm fb create(%dx%d)\n",
+ mode_cmd->width, mode_cmd->height);
+
+ exynos_fb = kzalloc(sizeof(*exynos_fb), GFP_KERNEL);
+ if (!exynos_fb) {
+ DRM_ERROR("failed to allocate exynos drm framebuffer.\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ fb = &exynos_fb->fb;
+ ret = drm_framebuffer_init(dev, fb, &exynos_drm_fb_funcs);
+ if (ret) {
+ DRM_ERROR("failed to initialize framebuffer.\n");
+ goto err_init;
+ }
+
+ DRM_LOG_KMS("create: fb id: %d\n", fb->base.id);
+
+ size = mode_cmd->pitch * mode_cmd->height;
+
+ /*
+ * mode_cmd->handle could be NULL at booting time or
+ * with user request. if NULL, a new buffer or a gem object
+ * would be allocated.
+ */
+ if (!mode_cmd->handle) {
+ if (!file_priv) {
+ struct exynos_drm_buf_entry *entry;
+
+ /*
+ * in case that file_priv is NULL, it allocates
+ * only buffer and this buffer would be used
+ * for default framebuffer.
+ */
+ entry = exynos_drm_buf_create(dev, size);
+ if (IS_ERR(entry)) {
+ ret = PTR_ERR(entry);
+ goto err_buffer;
+ }
+
+ exynos_fb->entry = entry;
+
+ DRM_LOG_KMS("default fb: paddr = 0x%lx, size = 0x%x\n",
+ (unsigned long)entry->paddr, size);
+
+ goto out;
+ } else {
+ exynos_gem_obj = exynos_drm_gem_create(file_priv, dev,
+ size,
+ &mode_cmd->handle);
+ if (IS_ERR(exynos_gem_obj)) {
+ ret = PTR_ERR(exynos_gem_obj);
+ goto err_buffer;
+ }
+ }
+ } else {
+ obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
+ if (!obj) {
+ DRM_ERROR("failed to lookup gem object.\n");
+ goto err_buffer;
+ }
+
+ exynos_gem_obj = to_exynos_gem_obj(obj);
+
+ drm_gem_object_unreference_unlocked(obj);
+ }
+
+ /*
+ * if got a exynos_gem_obj from either a handle or
+ * a new creation then exynos_fb->exynos_gem_obj is NULL
+ * so that default framebuffer has no its own gem object,
+ * only its own buffer object.
+ */
+ exynos_fb->entry = exynos_gem_obj->entry;
+
+ DRM_LOG_KMS("paddr = 0x%lx, size = 0x%x, gem object = 0x%x\n",
+ (unsigned long)exynos_fb->entry->paddr, size,
+ (unsigned int)&exynos_gem_obj->base);
+
+out:
+ exynos_fb->exynos_gem_obj = exynos_gem_obj;
+
+ drm_helper_mode_fill_fb_struct(fb, mode_cmd);
+
+ return fb;
+
+err_buffer:
+ drm_framebuffer_cleanup(fb);
+
+err_init:
+ kfree(exynos_fb);
+
+ return ERR_PTR(ret);
+}
+
+struct drm_framebuffer *exynos_drm_fb_create(struct drm_device *dev,
+ struct drm_file *file_priv,
+ struct drm_mode_fb_cmd *mode_cmd)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ return exynos_drm_fb_init(file_priv, dev, mode_cmd);
+}
+
+struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb)
+{
+ struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb);
+ struct exynos_drm_buf_entry *entry;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ entry = exynos_fb->entry;
+ if (!entry)
+ return NULL;
+
+ DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n",
+ (unsigned long)entry->vaddr,
+ (unsigned long)entry->paddr);
+
+ return entry;
+}
+
+static struct drm_mode_config_funcs exynos_drm_mode_config_funcs = {
+ .fb_create = exynos_drm_fb_create,
+};
+
+void exynos_drm_mode_config_init(struct drm_device *dev)
+{
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+
+ /*
+ * set max width and height as default value(4096x4096).
+ * this value would be used to check framebuffer size limitation
+ * at drm_mode_addfb().
+ */
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
+
+ dev->mode_config.funcs = &exynos_drm_mode_config_funcs;
+}
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Seung-Woo Kim <sw0312.kim@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM FB Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.h b/drivers/gpu/drm/exynos/exynos_drm_fb.h
new file mode 100644
index 0000000..eb35931
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_fb.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_FB_H_
+#define _EXYNOS_DRM_FB_H
+
+struct drm_framebuffer *exynos_drm_fb_create(struct drm_device *dev,
+ struct drm_file *filp,
+ struct drm_mode_fb_cmd *mode_cmd);
+
+void exynos_drm_mode_config_init(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
new file mode 100644
index 0000000..1f4b3d1
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -0,0 +1,456 @@
+/* exynos_drm_fbdev.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm_crtc.h"
+#include "drm_fb_helper.h"
+#include "drm_crtc_helper.h"
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_fb.h"
+#include "exynos_drm_buf.h"
+
+#define MAX_CONNECTOR 4
+#define PREFERRED_BPP 32
+
+#define to_exynos_fbdev(x) container_of(x, struct exynos_drm_fbdev,\
+ drm_fb_helper)
+
+struct exynos_drm_fbdev {
+ struct drm_fb_helper drm_fb_helper;
+ struct drm_framebuffer *fb;
+};
+
+static int exynos_drm_fbdev_set_par(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+
+ switch (var->bits_per_pixel) {
+ case 32:
+ case 24:
+ case 18:
+ case 16:
+ case 12:
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
+ case 1:
+ info->fix.visual = FB_VISUAL_MONO01;
+ break;
+ default:
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ }
+
+ info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+
+ return drm_fb_helper_set_par(info);
+}
+
+
+static struct fb_ops exynos_drm_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = exynos_drm_fbdev_set_par,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_pan_display = drm_fb_helper_pan_display,
+ .fb_setcmap = drm_fb_helper_setcmap,
+};
+
+static int exynos_drm_fbdev_update(struct drm_fb_helper *helper,
+ struct drm_framebuffer *fb,
+ unsigned int fb_width,
+ unsigned int fb_height)
+{
+ struct fb_info *fbi = helper->fbdev;
+ struct drm_device *dev = helper->dev;
+ struct exynos_drm_fbdev *exynos_fb = to_exynos_fbdev(helper);
+ struct exynos_drm_buf_entry *entry;
+ unsigned int size = fb_width * fb_height * (fb->bits_per_pixel >> 3);
+ unsigned long offset;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ exynos_fb->fb = fb;
+
+ drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth);
+ drm_fb_helper_fill_var(fbi, helper, fb_width, fb_height);
+
+ entry = exynos_drm_fb_get_buf(fb);
+ if (!entry) {
+ DRM_LOG_KMS("entry is null.\n");
+ return -EFAULT;
+ }
+
+ offset = fbi->var.xoffset * (fb->bits_per_pixel >> 3);
+ offset += fbi->var.yoffset * fb->pitch;
+
+ dev->mode_config.fb_base = entry->paddr;
+ fbi->screen_base = entry->vaddr + offset;
+ fbi->fix.smem_start = entry->paddr + offset;
+ fbi->screen_size = size;
+ fbi->fix.smem_len = size;
+
+ return 0;
+}
+
+static int exynos_drm_fbdev_create(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper);
+ struct drm_device *dev = helper->dev;
+ struct fb_info *fbi;
+ struct drm_mode_fb_cmd mode_cmd = { 0 };
+ struct platform_device *pdev = dev->platformdev;
+ int ret;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d\n",
+ sizes->surface_width, sizes->surface_height,
+ sizes->surface_bpp);
+
+ mode_cmd.width = sizes->surface_width;
+ mode_cmd.height = sizes->surface_height;
+ mode_cmd.bpp = sizes->surface_bpp;
+ mode_cmd.depth = sizes->surface_depth;
+
+ mutex_lock(&dev->struct_mutex);
+
+ fbi = framebuffer_alloc(0, &pdev->dev);
+ if (!fbi) {
+ DRM_ERROR("failed to allocate fb info.\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ exynos_fbdev->fb = exynos_drm_fb_create(dev, NULL, &mode_cmd);
+ if (IS_ERR_OR_NULL(exynos_fbdev->fb)) {
+ DRM_ERROR("failed to create drm framebuffer.\n");
+ ret = PTR_ERR(exynos_fbdev->fb);
+ goto out;
+ }
+
+ helper->fb = exynos_fbdev->fb;
+ helper->fbdev = fbi;
+
+ fbi->par = helper;
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->fbops = &exynos_drm_fb_ops;
+
+ ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+ if (ret) {
+ DRM_ERROR("failed to allocate cmap.\n");
+ goto out;
+ }
+
+ ret = exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width,
+ sizes->fb_height);
+ if (ret < 0)
+ fb_dealloc_cmap(&fbi->cmap);
+
+/*
+ * if failed, all resources allocated above would be released by
+ * drm_mode_config_cleanup() when drm_load() had been called prior
+ * to any specific driver such as fimd or hdmi driver.
+ */
+out:
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+}
+
+static bool
+exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ if (fb->width != sizes->surface_width)
+ return false;
+ if (fb->height != sizes->surface_height)
+ return false;
+ if (fb->bits_per_pixel != sizes->surface_bpp)
+ return false;
+ if (fb->depth != sizes->surface_depth)
+ return false;
+
+ return true;
+}
+
+static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ struct drm_device *dev = helper->dev;
+ struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper);
+ struct drm_framebuffer *fb = exynos_fbdev->fb;
+ struct drm_mode_fb_cmd mode_cmd = { 0 };
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (helper->fb != fb) {
+ DRM_ERROR("drm framebuffer is different\n");
+ return -EINVAL;
+ }
+
+ if (exynos_drm_fbdev_is_samefb(fb, sizes))
+ return 0;
+
+ mode_cmd.width = sizes->surface_width;
+ mode_cmd.height = sizes->surface_height;
+ mode_cmd.bpp = sizes->surface_bpp;
+ mode_cmd.depth = sizes->surface_depth;
+
+ if (fb->funcs->destroy)
+ fb->funcs->destroy(fb);
+
+ exynos_fbdev->fb = exynos_drm_fb_create(dev, NULL, &mode_cmd);
+ if (IS_ERR(exynos_fbdev->fb)) {
+ DRM_ERROR("failed to allocate fb.\n");
+ return PTR_ERR(exynos_fbdev->fb);
+ }
+
+ helper->fb = exynos_fbdev->fb;
+ return exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width,
+ sizes->fb_height);
+}
+
+static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ int ret = 0;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (!helper->fb) {
+ ret = exynos_drm_fbdev_create(helper, sizes);
+ if (ret < 0) {
+ DRM_ERROR("failed to create fbdev.\n");
+ return ret;
+ }
+
+ /*
+ * fb_helper expects a value more than 1 if succeed
+ * because register_framebuffer() should be called.
+ */
+ ret = 1;
+ } else {
+ ret = exynos_drm_fbdev_recreate(helper, sizes);
+ if (ret < 0) {
+ DRM_ERROR("failed to reconfigure fbdev\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static struct drm_fb_helper_funcs exynos_drm_fb_helper_funcs = {
+ .fb_probe = exynos_drm_fbdev_probe,
+};
+
+int exynos_drm_fbdev_init(struct drm_device *dev)
+{
+ struct exynos_drm_fbdev *fbdev;
+ struct exynos_drm_private *private = dev->dev_private;
+ struct drm_fb_helper *helper;
+ unsigned int num_crtc;
+ int ret;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (!dev->mode_config.num_crtc || !dev->mode_config.num_connector)
+ return 0;
+
+ fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
+ if (!fbdev) {
+ DRM_ERROR("failed to allocate drm fbdev.\n");
+ return -ENOMEM;
+ }
+
+ private->fb_helper = helper = &fbdev->drm_fb_helper;
+ helper->funcs = &exynos_drm_fb_helper_funcs;
+
+ num_crtc = dev->mode_config.num_crtc;
+
+ ret = drm_fb_helper_init(dev, helper, num_crtc, MAX_CONNECTOR);
+ if (ret < 0) {
+ DRM_ERROR("failed to initialize drm fb helper.\n");
+ goto err_init;
+ }
+
+ ret = drm_fb_helper_single_add_all_connectors(helper);
+ if (ret < 0) {
+ DRM_ERROR("failed to register drm_fb_helper_connector.\n");
+ goto err_setup;
+
+ }
+
+ ret = drm_fb_helper_initial_config(helper, PREFERRED_BPP);
+ if (ret < 0) {
+ DRM_ERROR("failed to set up hw configuration.\n");
+ goto err_setup;
+ }
+
+ return 0;
+
+err_setup:
+ drm_fb_helper_fini(helper);
+
+err_init:
+ private->fb_helper = NULL;
+ kfree(fbdev);
+
+ return ret;
+}
+
+static void exynos_drm_fbdev_destroy(struct drm_device *dev,
+ struct drm_fb_helper *fb_helper)
+{
+ struct drm_framebuffer *fb;
+
+ /* release drm framebuffer and real buffer */
+ if (fb_helper->fb && fb_helper->fb->funcs) {
+ fb = fb_helper->fb;
+ if (fb && fb->funcs->destroy)
+ fb->funcs->destroy(fb);
+ }
+
+ /* release linux framebuffer */
+ if (fb_helper->fbdev) {
+ struct fb_info *info;
+ int ret;
+
+ info = fb_helper->fbdev;
+ ret = unregister_framebuffer(info);
+ if (ret < 0)
+ DRM_DEBUG_KMS("failed unregister_framebuffer()\n");
+
+ if (info->cmap.len)
+ fb_dealloc_cmap(&info->cmap);
+
+ framebuffer_release(info);
+ }
+
+ drm_fb_helper_fini(fb_helper);
+}
+
+void exynos_drm_fbdev_fini(struct drm_device *dev)
+{
+ struct exynos_drm_private *private = dev->dev_private;
+ struct exynos_drm_fbdev *fbdev;
+
+ if (!private || !private->fb_helper)
+ return;
+
+ fbdev = to_exynos_fbdev(private->fb_helper);
+
+ exynos_drm_fbdev_destroy(dev, private->fb_helper);
+ kfree(fbdev);
+ private->fb_helper = NULL;
+}
+
+void exynos_drm_fbdev_restore_mode(struct drm_device *dev)
+{
+ struct exynos_drm_private *private = dev->dev_private;
+
+ if (!private || !private->fb_helper)
+ return;
+
+ drm_fb_helper_restore_fbdev_mode(private->fb_helper);
+}
+
+int exynos_drm_fbdev_reinit(struct drm_device *dev)
+{
+ struct exynos_drm_private *private = dev->dev_private;
+ struct drm_fb_helper *fb_helper;
+ int ret;
+
+ if (!private)
+ return -EINVAL;
+
+ /*
+ * if all sub drivers were unloaded then num_connector is 0
+ * so at this time, the framebuffers also should be destroyed.
+ */
+ if (!dev->mode_config.num_connector) {
+ exynos_drm_fbdev_fini(dev);
+ return 0;
+ }
+
+ fb_helper = private->fb_helper;
+
+ if (fb_helper) {
+ drm_fb_helper_fini(fb_helper);
+
+ ret = drm_fb_helper_init(dev, fb_helper,
+ dev->mode_config.num_crtc, MAX_CONNECTOR);
+ if (ret < 0) {
+ DRM_ERROR("failed to initialize drm fb helper\n");
+ return ret;
+ }
+
+ ret = drm_fb_helper_single_add_all_connectors(fb_helper);
+ if (ret < 0) {
+ DRM_ERROR("failed to add fb helper to connectors\n");
+ goto err;
+ }
+
+ ret = drm_fb_helper_initial_config(fb_helper, PREFERRED_BPP);
+ if (ret < 0) {
+ DRM_ERROR("failed to set up hw configuration.\n");
+ goto err;
+ }
+ } else {
+ /*
+ * if drm_load() failed whem drm load() was called prior
+ * to specific drivers, fb_helper must be NULL and so
+ * this fuction should be called again to re-initialize and
+ * re-configure the fb helper. it means that this function
+ * has been called by the specific drivers.
+ */
+ ret = exynos_drm_fbdev_init(dev);
+ }
+
+ return ret;
+
+err:
+ /*
+ * if drm_load() failed when drm load() was called prior
+ * to specific drivers, the fb_helper must be NULL and so check it.
+ */
+ if (fb_helper)
+ drm_fb_helper_fini(fb_helper);
+
+ return ret;
+}
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Seung-Woo Kim <sw0312.kim@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM FBDEV Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.h b/drivers/gpu/drm/exynos/exynos_drm_fbdev.h
new file mode 100644
index 0000000..ccfce8a
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_FBDEV_H_
+#define _EXYNOS_DRM_FBDEV_H_
+
+int exynos_drm_fbdev_init(struct drm_device *dev);
+int exynos_drm_fbdev_reinit(struct drm_device *dev);
+void exynos_drm_fbdev_fini(struct drm_device *dev);
+void exynos_drm_fbdev_restore_mode(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
new file mode 100644
index 0000000..4659c88
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -0,0 +1,811 @@
+/* exynos_drm_fimd.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Authors:
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Inki Dae <inki.dae@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include "drmP.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <drm/exynos_drm.h>
+#include <plat/regs-fb-v4.h>
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_fbdev.h"
+#include "exynos_drm_crtc.h"
+
+/*
+ * FIMD is stand for Fully Interactive Mobile Display and
+ * as a display controller, it transfers contents drawn on memory
+ * to a LCD Panel through Display Interfaces such as RGB or
+ * CPU Interface.
+ */
+
+/* position control register for hardware window 0, 2 ~ 4.*/
+#define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16)
+#define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16)
+/* size control register for hardware window 0. */
+#define VIDOSD_C_SIZE_W0 (VIDOSD_BASE + 0x08)
+/* alpha control register for hardware window 1 ~ 4. */
+#define VIDOSD_C(win) (VIDOSD_BASE + 0x18 + (win) * 16)
+/* size control register for hardware window 1 ~ 4. */
+#define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16)
+
+#define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8)
+#define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8)
+#define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4)
+
+/* color key control register for hardware window 1 ~ 4. */
+#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + (x * 8))
+/* color key value register for hardware window 1 ~ 4. */
+#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + (x * 8))
+
+/* FIMD has totally five hardware windows. */
+#define WINDOWS_NR 5
+
+#define get_fimd_context(dev) platform_get_drvdata(to_platform_device(dev))
+
+struct fimd_win_data {
+ unsigned int offset_x;
+ unsigned int offset_y;
+ unsigned int ovl_width;
+ unsigned int ovl_height;
+ unsigned int fb_width;
+ unsigned int fb_height;
+ unsigned int bpp;
+ dma_addr_t paddr;
+ void __iomem *vaddr;
+ unsigned int buf_offsize;
+ unsigned int line_size; /* bytes */
+};
+
+struct fimd_context {
+ struct exynos_drm_subdrv subdrv;
+ int irq;
+ struct drm_crtc *crtc;
+ struct clk *bus_clk;
+ struct clk *lcd_clk;
+ struct resource *regs_res;
+ void __iomem *regs;
+ struct fimd_win_data win_data[WINDOWS_NR];
+ unsigned int clkdiv;
+ unsigned int default_win;
+ unsigned long irq_flags;
+ u32 vidcon0;
+ u32 vidcon1;
+
+ struct fb_videomode *timing;
+};
+
+static bool fimd_display_is_connected(struct device *dev)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* TODO. */
+
+ return true;
+}
+
+static void *fimd_get_timing(struct device *dev)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ return ctx->timing;
+}
+
+static int fimd_check_timing(struct device *dev, void *timing)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* TODO. */
+
+ return 0;
+}
+
+static int fimd_display_power_on(struct device *dev, int mode)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* TODO. */
+
+ return 0;
+}
+
+static struct exynos_drm_display fimd_display = {
+ .type = EXYNOS_DISPLAY_TYPE_LCD,
+ .is_connected = fimd_display_is_connected,
+ .get_timing = fimd_get_timing,
+ .check_timing = fimd_check_timing,
+ .power_on = fimd_display_power_on,
+};
+
+static void fimd_commit(struct device *dev)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ struct fb_videomode *timing = ctx->timing;
+ u32 val;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* setup polarity values from machine code. */
+ writel(ctx->vidcon1, ctx->regs + VIDCON1);
+
+ /* setup vertical timing values. */
+ val = VIDTCON0_VBPD(timing->upper_margin - 1) |
+ VIDTCON0_VFPD(timing->lower_margin - 1) |
+ VIDTCON0_VSPW(timing->vsync_len - 1);
+ writel(val, ctx->regs + VIDTCON0);
+
+ /* setup horizontal timing values. */
+ val = VIDTCON1_HBPD(timing->left_margin - 1) |
+ VIDTCON1_HFPD(timing->right_margin - 1) |
+ VIDTCON1_HSPW(timing->hsync_len - 1);
+ writel(val, ctx->regs + VIDTCON1);
+
+ /* setup horizontal and vertical display size. */
+ val = VIDTCON2_LINEVAL(timing->yres - 1) |
+ VIDTCON2_HOZVAL(timing->xres - 1);
+ writel(val, ctx->regs + VIDTCON2);
+
+ /* setup clock source, clock divider, enable dma. */
+ val = ctx->vidcon0;
+ val &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
+
+ if (ctx->clkdiv > 1)
+ val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR;
+ else
+ val &= ~VIDCON0_CLKDIR; /* 1:1 clock */
+
+ /*
+ * fields of register with prefix '_F' would be updated
+ * at vsync(same as dma start)
+ */
+ val |= VIDCON0_ENVID | VIDCON0_ENVID_F;
+ writel(val, ctx->regs + VIDCON0);
+}
+
+static int fimd_enable_vblank(struct device *dev)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ u32 val;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (!test_and_set_bit(0, &ctx->irq_flags)) {
+ val = readl(ctx->regs + VIDINTCON0);
+
+ val |= VIDINTCON0_INT_ENABLE;
+ val |= VIDINTCON0_INT_FRAME;
+
+ val &= ~VIDINTCON0_FRAMESEL0_MASK;
+ val |= VIDINTCON0_FRAMESEL0_VSYNC;
+ val &= ~VIDINTCON0_FRAMESEL1_MASK;
+ val |= VIDINTCON0_FRAMESEL1_NONE;
+
+ writel(val, ctx->regs + VIDINTCON0);
+ }
+
+ return 0;
+}
+
+static void fimd_disable_vblank(struct device *dev)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ u32 val;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (test_and_clear_bit(0, &ctx->irq_flags)) {
+ val = readl(ctx->regs + VIDINTCON0);
+
+ val &= ~VIDINTCON0_INT_FRAME;
+ val &= ~VIDINTCON0_INT_ENABLE;
+
+ writel(val, ctx->regs + VIDINTCON0);
+ }
+}
+
+static struct exynos_drm_manager_ops fimd_manager_ops = {
+ .commit = fimd_commit,
+ .enable_vblank = fimd_enable_vblank,
+ .disable_vblank = fimd_disable_vblank,
+};
+
+static void fimd_win_mode_set(struct device *dev,
+ struct exynos_drm_overlay *overlay)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ struct fimd_win_data *win_data;
+ unsigned long offset;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (!overlay) {
+ dev_err(dev, "overlay is NULL\n");
+ return;
+ }
+
+ offset = overlay->fb_x * (overlay->bpp >> 3);
+ offset += overlay->fb_y * overlay->pitch;
+
+ DRM_DEBUG_KMS("offset = 0x%lx, pitch = %x\n", offset, overlay->pitch);
+
+ win_data = &ctx->win_data[ctx->default_win];
+
+ win_data->offset_x = overlay->crtc_x;
+ win_data->offset_y = overlay->crtc_y;
+ win_data->ovl_width = overlay->crtc_width;
+ win_data->ovl_height = overlay->crtc_height;
+ win_data->fb_width = overlay->fb_width;
+ win_data->fb_height = overlay->fb_height;
+ win_data->paddr = overlay->paddr + offset;
+ win_data->vaddr = overlay->vaddr + offset;
+ win_data->bpp = overlay->bpp;
+ win_data->buf_offsize = (overlay->fb_width - overlay->crtc_width) *
+ (overlay->bpp >> 3);
+ win_data->line_size = overlay->crtc_width * (overlay->bpp >> 3);
+
+ DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n",
+ win_data->offset_x, win_data->offset_y);
+ DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
+ win_data->ovl_width, win_data->ovl_height);
+ DRM_DEBUG_KMS("paddr = 0x%lx, vaddr = 0x%lx\n",
+ (unsigned long)win_data->paddr,
+ (unsigned long)win_data->vaddr);
+ DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n",
+ overlay->fb_width, overlay->crtc_width);
+}
+
+static void fimd_win_set_pixfmt(struct device *dev, unsigned int win)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ struct fimd_win_data *win_data = &ctx->win_data[win];
+ unsigned long val;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ val = WINCONx_ENWIN;
+
+ switch (win_data->bpp) {
+ case 1:
+ val |= WINCON0_BPPMODE_1BPP;
+ val |= WINCONx_BITSWP;
+ val |= WINCONx_BURSTLEN_4WORD;
+ break;
+ case 2:
+ val |= WINCON0_BPPMODE_2BPP;
+ val |= WINCONx_BITSWP;
+ val |= WINCONx_BURSTLEN_8WORD;
+ break;
+ case 4:
+ val |= WINCON0_BPPMODE_4BPP;
+ val |= WINCONx_BITSWP;
+ val |= WINCONx_BURSTLEN_8WORD;
+ break;
+ case 8:
+ val |= WINCON0_BPPMODE_8BPP_PALETTE;
+ val |= WINCONx_BURSTLEN_8WORD;
+ val |= WINCONx_BYTSWP;
+ break;
+ case 16:
+ val |= WINCON0_BPPMODE_16BPP_565;
+ val |= WINCONx_HAWSWP;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case 24:
+ val |= WINCON0_BPPMODE_24BPP_888;
+ val |= WINCONx_WSWP;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ case 32:
+ val |= WINCON1_BPPMODE_28BPP_A4888
+ | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
+ val |= WINCONx_WSWP;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ default:
+ DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n");
+
+ val |= WINCON0_BPPMODE_24BPP_888;
+ val |= WINCONx_WSWP;
+ val |= WINCONx_BURSTLEN_16WORD;
+ break;
+ }
+
+ DRM_DEBUG_KMS("bpp = %d\n", win_data->bpp);
+
+ writel(val, ctx->regs + WINCON(win));
+}
+
+static void fimd_win_set_colkey(struct device *dev, unsigned int win)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ unsigned int keycon0 = 0, keycon1 = 0;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
+ WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
+
+ keycon1 = WxKEYCON1_COLVAL(0xffffffff);
+
+ writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
+ writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
+}
+
+static void fimd_win_commit(struct device *dev)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ struct fimd_win_data *win_data;
+ int win = ctx->default_win;
+ unsigned long val, alpha, size;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (win < 0 || win > WINDOWS_NR)
+ return;
+
+ win_data = &ctx->win_data[win];
+
+ /*
+ * SHADOWCON register is used for enabling timing.
+ *
+ * for example, once only width value of a register is set,
+ * if the dma is started then fimd hardware could malfunction so
+ * with protect window setting, the register fields with prefix '_F'
+ * wouldn't be updated at vsync also but updated once unprotect window
+ * is set.
+ */
+
+ /* protect windows */
+ val = readl(ctx->regs + SHADOWCON);
+ val |= SHADOWCON_WINx_PROTECT(win);
+ writel(val, ctx->regs + SHADOWCON);
+
+ /* buffer start address */
+ val = win_data->paddr;
+ writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
+
+ /* buffer end address */
+ size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3);
+ val = win_data->paddr + size;
+ writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
+
+ DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
+ (unsigned long)win_data->paddr, val, size);
+ DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
+ win_data->ovl_width, win_data->ovl_height);
+
+ /* buffer size */
+ val = VIDW_BUF_SIZE_OFFSET(win_data->buf_offsize) |
+ VIDW_BUF_SIZE_PAGEWIDTH(win_data->line_size);
+ writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0));
+
+ /* OSD position */
+ val = VIDOSDxA_TOPLEFT_X(win_data->offset_x) |
+ VIDOSDxA_TOPLEFT_Y(win_data->offset_y);
+ writel(val, ctx->regs + VIDOSD_A(win));
+
+ val = VIDOSDxB_BOTRIGHT_X(win_data->offset_x +
+ win_data->ovl_width - 1) |
+ VIDOSDxB_BOTRIGHT_Y(win_data->offset_y +
+ win_data->ovl_height - 1);
+ writel(val, ctx->regs + VIDOSD_B(win));
+
+ DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
+ win_data->offset_x, win_data->offset_y,
+ win_data->offset_x + win_data->ovl_width - 1,
+ win_data->offset_y + win_data->ovl_height - 1);
+
+ /* hardware window 0 doesn't support alpha channel. */
+ if (win != 0) {
+ /* OSD alpha */
+ alpha = VIDISD14C_ALPHA1_R(0xf) |
+ VIDISD14C_ALPHA1_G(0xf) |
+ VIDISD14C_ALPHA1_B(0xf);
+
+ writel(alpha, ctx->regs + VIDOSD_C(win));
+ }
+
+ /* OSD size */
+ if (win != 3 && win != 4) {
+ u32 offset = VIDOSD_D(win);
+ if (win == 0)
+ offset = VIDOSD_C_SIZE_W0;
+ val = win_data->ovl_width * win_data->ovl_height;
+ writel(val, ctx->regs + offset);
+
+ DRM_DEBUG_KMS("osd size = 0x%x\n", (unsigned int)val);
+ }
+
+ fimd_win_set_pixfmt(dev, win);
+
+ /* hardware window 0 doesn't support color key. */
+ if (win != 0)
+ fimd_win_set_colkey(dev, win);
+
+ /* Enable DMA channel and unprotect windows */
+ val = readl(ctx->regs + SHADOWCON);
+ val |= SHADOWCON_CHx_ENABLE(win);
+ val &= ~SHADOWCON_WINx_PROTECT(win);
+ writel(val, ctx->regs + SHADOWCON);
+}
+
+static void fimd_win_disable(struct device *dev)
+{
+ struct fimd_context *ctx = get_fimd_context(dev);
+ struct fimd_win_data *win_data;
+ int win = ctx->default_win;
+ u32 val;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (win < 0 || win > WINDOWS_NR)
+ return;
+
+ win_data = &ctx->win_data[win];
+
+ /* protect windows */
+ val = readl(ctx->regs + SHADOWCON);
+ val |= SHADOWCON_WINx_PROTECT(win);
+ writel(val, ctx->regs + SHADOWCON);
+
+ /* wincon */
+ val = readl(ctx->regs + WINCON(win));
+ val &= ~WINCONx_ENWIN;
+ writel(val, ctx->regs + WINCON(win));
+
+ /* unprotect windows */
+ val = readl(ctx->regs + SHADOWCON);
+ val &= ~SHADOWCON_CHx_ENABLE(win);
+ val &= ~SHADOWCON_WINx_PROTECT(win);
+ writel(val, ctx->regs + SHADOWCON);
+}
+
+static struct exynos_drm_overlay_ops fimd_overlay_ops = {
+ .mode_set = fimd_win_mode_set,
+ .commit = fimd_win_commit,
+ .disable = fimd_win_disable,
+};
+
+static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc)
+{
+ struct exynos_drm_private *dev_priv = drm_dev->dev_private;
+ struct drm_pending_vblank_event *e, *t;
+ struct timeval now;
+ unsigned long flags;
+ bool is_checked = false;
+
+ spin_lock_irqsave(&drm_dev->event_lock, flags);
+
+ list_for_each_entry_safe(e, t, &dev_priv->pageflip_event_list,
+ base.link) {
+ /* if event's pipe isn't same as crtc then ignore it. */
+ if (crtc != e->pipe)
+ continue;
+
+ is_checked = true;
+
+ do_gettimeofday(&now);
+ e->event.sequence = 0;
+ e->event.tv_sec = now.tv_sec;
+ e->event.tv_usec = now.tv_usec;
+
+ list_move_tail(&e->base.link, &e->base.file_priv->event_list);
+ wake_up_interruptible(&e->base.file_priv->event_wait);
+ }
+
+ if (is_checked)
+ drm_vblank_put(drm_dev, crtc);
+
+ spin_unlock_irqrestore(&drm_dev->event_lock, flags);
+}
+
+static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
+{
+ struct fimd_context *ctx = (struct fimd_context *)dev_id;
+ struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
+ struct drm_device *drm_dev = subdrv->drm_dev;
+ struct exynos_drm_manager *manager = &subdrv->manager;
+ u32 val;
+
+ val = readl(ctx->regs + VIDINTCON1);
+
+ if (val & VIDINTCON1_INT_FRAME)
+ /* VSYNC interrupt */
+ writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1);
+
+ drm_handle_vblank(drm_dev, manager->pipe);
+ fimd_finish_pageflip(drm_dev, manager->pipe);
+
+ return IRQ_HANDLED;
+}
+
+static int fimd_subdrv_probe(struct drm_device *drm_dev, struct device *dev)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /*
+ * enable drm irq mode.
+ * - with irq_enabled = 1, we can use the vblank feature.
+ *
+ * P.S. note that we wouldn't use drm irq handler but
+ * just specific driver own one instead because
+ * drm framework supports only one irq handler.
+ */
+ drm_dev->irq_enabled = 1;
+
+ /*
+ * with vblank_disable_allowed = 1, vblank interrupt will be disabled
+ * by drm timer once a current process gives up ownership of
+ * vblank event.(drm_vblank_put function was called)
+ */
+ drm_dev->vblank_disable_allowed = 1;
+
+ return 0;
+}
+
+static void fimd_subdrv_remove(struct drm_device *drm_dev)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* TODO. */
+}
+
+static int fimd_calc_clkdiv(struct fimd_context *ctx,
+ struct fb_videomode *timing)
+{
+ unsigned long clk = clk_get_rate(ctx->lcd_clk);
+ u32 retrace;
+ u32 clkdiv;
+ u32 best_framerate = 0;
+ u32 framerate;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ retrace = timing->left_margin + timing->hsync_len +
+ timing->right_margin + timing->xres;
+ retrace *= timing->upper_margin + timing->vsync_len +
+ timing->lower_margin + timing->yres;
+
+ /* default framerate is 60Hz */
+ if (!timing->refresh)
+ timing->refresh = 60;
+
+ clk /= retrace;
+
+ for (clkdiv = 1; clkdiv < 0x100; clkdiv++) {
+ int tmp;
+
+ /* get best framerate */
+ framerate = clk / clkdiv;
+ tmp = timing->refresh - framerate;
+ if (tmp < 0) {
+ best_framerate = framerate;
+ continue;
+ } else {
+ if (!best_framerate)
+ best_framerate = framerate;
+ else if (tmp < (best_framerate - framerate))
+ best_framerate = framerate;
+ break;
+ }
+ }
+
+ return clkdiv;
+}
+
+static void fimd_clear_win(struct fimd_context *ctx, int win)
+{
+ u32 val;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ writel(0, ctx->regs + WINCON(win));
+ writel(0, ctx->regs + VIDOSD_A(win));
+ writel(0, ctx->regs + VIDOSD_B(win));
+ writel(0, ctx->regs + VIDOSD_C(win));
+
+ if (win == 1 || win == 2)
+ writel(0, ctx->regs + VIDOSD_D(win));
+
+ val = readl(ctx->regs + SHADOWCON);
+ val &= ~SHADOWCON_WINx_PROTECT(win);
+ writel(val, ctx->regs + SHADOWCON);
+}
+
+static int __devinit fimd_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct fimd_context *ctx;
+ struct exynos_drm_subdrv *subdrv;
+ struct exynos_drm_fimd_pdata *pdata;
+ struct fb_videomode *timing;
+ struct resource *res;
+ int win;
+ int ret = -EINVAL;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(dev, "no platform data specified\n");
+ return -EINVAL;
+ }
+
+ timing = &pdata->timing;
+ if (!timing) {
+ dev_err(dev, "timing is null.\n");
+ return -EINVAL;
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->bus_clk = clk_get(dev, "fimd");
+ if (IS_ERR(ctx->bus_clk)) {
+ dev_err(dev, "failed to get bus clock\n");
+ ret = PTR_ERR(ctx->bus_clk);
+ goto err_clk_get;
+ }
+
+ clk_enable(ctx->bus_clk);
+
+ ctx->lcd_clk = clk_get(dev, "sclk_fimd");
+ if (IS_ERR(ctx->lcd_clk)) {
+ dev_err(dev, "failed to get lcd clock\n");
+ ret = PTR_ERR(ctx->lcd_clk);
+ goto err_bus_clk;
+ }
+
+ clk_enable(ctx->lcd_clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "failed to find registers\n");
+ ret = -ENOENT;
+ goto err_clk;
+ }
+
+ ctx->regs_res = request_mem_region(res->start, resource_size(res),
+ dev_name(dev));
+ if (!ctx->regs_res) {
+ dev_err(dev, "failed to claim register region\n");
+ ret = -ENOENT;
+ goto err_clk;
+ }
+
+ ctx->regs = ioremap(res->start, resource_size(res));
+ if (!ctx->regs) {
+ dev_err(dev, "failed to map registers\n");
+ ret = -ENXIO;
+ goto err_req_region_io;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "irq request failed.\n");
+ goto err_req_region_irq;
+ }
+
+ ctx->irq = res->start;
+
+ for (win = 0; win < WINDOWS_NR; win++)
+ fimd_clear_win(ctx, win);
+
+ ret = request_irq(ctx->irq, fimd_irq_handler, 0, "drm_fimd", ctx);
+ if (ret < 0) {
+ dev_err(dev, "irq request failed.\n");
+ goto err_req_irq;
+ }
+
+ ctx->clkdiv = fimd_calc_clkdiv(ctx, timing);
+ ctx->vidcon0 = pdata->vidcon0;
+ ctx->vidcon1 = pdata->vidcon1;
+ ctx->default_win = pdata->default_win;
+ ctx->timing = timing;
+
+ timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
+
+ DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
+ timing->pixclock, ctx->clkdiv);
+
+ subdrv = &ctx->subdrv;
+
+ subdrv->probe = fimd_subdrv_probe;
+ subdrv->remove = fimd_subdrv_remove;
+ subdrv->manager.pipe = -1;
+ subdrv->manager.ops = &fimd_manager_ops;
+ subdrv->manager.overlay_ops = &fimd_overlay_ops;
+ subdrv->manager.display = &fimd_display;
+ subdrv->manager.dev = dev;
+
+ platform_set_drvdata(pdev, ctx);
+ exynos_drm_subdrv_register(subdrv);
+
+ return 0;
+
+err_req_irq:
+err_req_region_irq:
+ iounmap(ctx->regs);
+
+err_req_region_io:
+ release_resource(ctx->regs_res);
+ kfree(ctx->regs_res);
+
+err_clk:
+ clk_disable(ctx->lcd_clk);
+ clk_put(ctx->lcd_clk);
+
+err_bus_clk:
+ clk_disable(ctx->bus_clk);
+ clk_put(ctx->bus_clk);
+
+err_clk_get:
+ kfree(ctx);
+ return ret;
+}
+
+static int __devexit fimd_remove(struct platform_device *pdev)
+{
+ struct fimd_context *ctx = platform_get_drvdata(pdev);
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ exynos_drm_subdrv_unregister(&ctx->subdrv);
+
+ clk_disable(ctx->lcd_clk);
+ clk_disable(ctx->bus_clk);
+ clk_put(ctx->lcd_clk);
+ clk_put(ctx->bus_clk);
+
+ iounmap(ctx->regs);
+ release_resource(ctx->regs_res);
+ kfree(ctx->regs_res);
+ free_irq(ctx->irq, ctx);
+
+ kfree(ctx);
+
+ return 0;
+}
+
+static struct platform_driver fimd_driver = {
+ .probe = fimd_probe,
+ .remove = __devexit_p(fimd_remove),
+ .driver = {
+ .name = "exynos4-fb",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init fimd_init(void)
+{
+ return platform_driver_register(&fimd_driver);
+}
+
+static void __exit fimd_exit(void)
+{
+ platform_driver_unregister(&fimd_driver);
+}
+
+module_init(fimd_init);
+module_exit(fimd_exit);
+
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samsung DRM FIMD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c
new file mode 100644
index 0000000..a8e7a88
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c
@@ -0,0 +1,415 @@
+/* exynos_drm_gem.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Author: Inki Dae <inki.dae@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm.h"
+
+#include <drm/exynos_drm.h>
+
+#include "exynos_drm_drv.h"
+#include "exynos_drm_gem.h"
+#include "exynos_drm_buf.h"
+
+static unsigned int convert_to_vm_err_msg(int msg)
+{
+ unsigned int out_msg;
+
+ switch (msg) {
+ case 0:
+ case -ERESTARTSYS:
+ case -EINTR:
+ out_msg = VM_FAULT_NOPAGE;
+ break;
+
+ case -ENOMEM:
+ out_msg = VM_FAULT_OOM;
+ break;
+
+ default:
+ out_msg = VM_FAULT_SIGBUS;
+ break;
+ }
+
+ return out_msg;
+}
+
+static unsigned int get_gem_mmap_offset(struct drm_gem_object *obj)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ return (unsigned int)obj->map_list.hash.key << PAGE_SHIFT;
+}
+
+struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv,
+ struct drm_device *dev, unsigned int size,
+ unsigned int *handle)
+{
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+ struct exynos_drm_buf_entry *entry;
+ struct drm_gem_object *obj;
+ int ret;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ size = roundup(size, PAGE_SIZE);
+
+ exynos_gem_obj = kzalloc(sizeof(*exynos_gem_obj), GFP_KERNEL);
+ if (!exynos_gem_obj) {
+ DRM_ERROR("failed to allocate exynos gem object.\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* allocate the new buffer object and memory region. */
+ entry = exynos_drm_buf_create(dev, size);
+ if (!entry) {
+ kfree(exynos_gem_obj);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ exynos_gem_obj->entry = entry;
+
+ obj = &exynos_gem_obj->base;
+
+ ret = drm_gem_object_init(dev, obj, size);
+ if (ret < 0) {
+ DRM_ERROR("failed to initailize gem object.\n");
+ goto err_obj_init;
+ }
+
+ DRM_DEBUG_KMS("created file object = 0x%x\n", (unsigned int)obj->filp);
+
+ ret = drm_gem_create_mmap_offset(obj);
+ if (ret < 0) {
+ DRM_ERROR("failed to allocate mmap offset.\n");
+ goto err_create_mmap_offset;
+ }
+
+ /*
+ * allocate a id of idr table where the obj is registered
+ * and handle has the id what user can see.
+ */
+ ret = drm_gem_handle_create(file_priv, obj, handle);
+ if (ret)
+ goto err_handle_create;
+
+ DRM_DEBUG_KMS("gem handle = 0x%x\n", *handle);
+
+ /* drop reference from allocate - handle holds it now. */
+ drm_gem_object_unreference_unlocked(obj);
+
+ return exynos_gem_obj;
+
+err_handle_create:
+ drm_gem_free_mmap_offset(obj);
+
+err_create_mmap_offset:
+ drm_gem_object_release(obj);
+
+err_obj_init:
+ exynos_drm_buf_destroy(dev, exynos_gem_obj->entry);
+
+ kfree(exynos_gem_obj);
+
+ return ERR_PTR(ret);
+}
+
+int exynos_drm_gem_create_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_exynos_gem_create *args = data;
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+
+ DRM_DEBUG_KMS("%s : size = 0x%x\n", __FILE__, args->size);
+
+ exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size,
+ &args->handle);
+ if (IS_ERR(exynos_gem_obj))
+ return PTR_ERR(exynos_gem_obj);
+
+ return 0;
+}
+
+int exynos_drm_gem_map_offset_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_exynos_gem_map_off *args = data;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ DRM_DEBUG_KMS("handle = 0x%x, offset = 0x%lx\n",
+ args->handle, (unsigned long)args->offset);
+
+ if (!(dev->driver->driver_features & DRIVER_GEM)) {
+ DRM_ERROR("does not support GEM.\n");
+ return -ENODEV;
+ }
+
+ return exynos_drm_gem_dumb_map_offset(file_priv, dev, args->handle,
+ &args->offset);
+}
+
+static int exynos_drm_gem_mmap_buffer(struct file *filp,
+ struct vm_area_struct *vma)
+{
+ struct drm_gem_object *obj = filp->private_data;
+ struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj);
+ struct exynos_drm_buf_entry *entry;
+ unsigned long pfn, vm_size;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ vma->vm_flags |= (VM_IO | VM_RESERVED);
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ vma->vm_file = filp;
+
+ vm_size = vma->vm_end - vma->vm_start;
+ /*
+ * a entry contains information to physically continuous memory
+ * allocated by user request or at framebuffer creation.
+ */
+ entry = exynos_gem_obj->entry;
+
+ /* check if user-requested size is valid. */
+ if (vm_size > entry->size)
+ return -EINVAL;
+
+ /*
+ * get page frame number to physical memory to be mapped
+ * to user space.
+ */
+ pfn = exynos_gem_obj->entry->paddr >> PAGE_SHIFT;
+
+ DRM_DEBUG_KMS("pfn = 0x%lx\n", pfn);
+
+ if (remap_pfn_range(vma, vma->vm_start, pfn, vm_size,
+ vma->vm_page_prot)) {
+ DRM_ERROR("failed to remap pfn range.\n");
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+static const struct file_operations exynos_drm_gem_fops = {
+ .mmap = exynos_drm_gem_mmap_buffer,
+};
+
+int exynos_drm_gem_mmap_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_exynos_gem_mmap *args = data;
+ struct drm_gem_object *obj;
+ unsigned int addr;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (!(dev->driver->driver_features & DRIVER_GEM)) {
+ DRM_ERROR("does not support GEM.\n");
+ return -ENODEV;
+ }
+
+ obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+ if (!obj) {
+ DRM_ERROR("failed to lookup gem object.\n");
+ return -EINVAL;
+ }
+
+ obj->filp->f_op = &exynos_drm_gem_fops;
+ obj->filp->private_data = obj;
+
+ down_write(¤t->mm->mmap_sem);
+ addr = do_mmap(obj->filp, 0, args->size,
+ PROT_READ | PROT_WRITE, MAP_SHARED, 0);
+ up_write(¤t->mm->mmap_sem);
+
+ drm_gem_object_unreference_unlocked(obj);
+
+ if (IS_ERR((void *)addr))
+ return PTR_ERR((void *)addr);
+
+ args->mapped = addr;
+
+ DRM_DEBUG_KMS("mapped = 0x%lx\n", (unsigned long)args->mapped);
+
+ return 0;
+}
+
+int exynos_drm_gem_init_object(struct drm_gem_object *obj)
+{
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ return 0;
+}
+
+void exynos_drm_gem_free_object(struct drm_gem_object *gem_obj)
+{
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ DRM_DEBUG_KMS("handle count = %d\n",
+ atomic_read(&gem_obj->handle_count));
+
+ if (gem_obj->map_list.map)
+ drm_gem_free_mmap_offset(gem_obj);
+
+ /* release file pointer to gem object. */
+ drm_gem_object_release(gem_obj);
+
+ exynos_gem_obj = to_exynos_gem_obj(gem_obj);
+
+ exynos_drm_buf_destroy(gem_obj->dev, exynos_gem_obj->entry);
+
+ kfree(exynos_gem_obj);
+}
+
+int exynos_drm_gem_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev, struct drm_mode_create_dumb *args)
+{
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /*
+ * alocate memory to be used for framebuffer.
+ * - this callback would be called by user application
+ * with DRM_IOCTL_MODE_CREATE_DUMB command.
+ */
+
+ args->pitch = args->width * args->bpp >> 3;
+ args->size = args->pitch * args->height;
+
+ exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size,
+ &args->handle);
+ if (IS_ERR(exynos_gem_obj))
+ return PTR_ERR(exynos_gem_obj);
+
+ return 0;
+}
+
+int exynos_drm_gem_dumb_map_offset(struct drm_file *file_priv,
+ struct drm_device *dev, uint32_t handle, uint64_t *offset)
+{
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+ struct drm_gem_object *obj;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ mutex_lock(&dev->struct_mutex);
+
+ /*
+ * get offset of memory allocated for drm framebuffer.
+ * - this callback would be called by user application
+ * with DRM_IOCTL_MODE_MAP_DUMB command.
+ */
+
+ obj = drm_gem_object_lookup(dev, file_priv, handle);
+ if (!obj) {
+ DRM_ERROR("failed to lookup gem object.\n");
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
+ }
+
+ exynos_gem_obj = to_exynos_gem_obj(obj);
+
+ *offset = get_gem_mmap_offset(&exynos_gem_obj->base);
+
+ drm_gem_object_unreference(obj);
+
+ DRM_DEBUG_KMS("offset = 0x%lx\n", (unsigned long)*offset);
+
+ mutex_unlock(&dev->struct_mutex);
+
+ return 0;
+}
+
+int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct drm_gem_object *obj = vma->vm_private_data;
+ struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj);
+ struct drm_device *dev = obj->dev;
+ unsigned long pfn;
+ pgoff_t page_offset;
+ int ret;
+
+ page_offset = ((unsigned long)vmf->virtual_address -
+ vma->vm_start) >> PAGE_SHIFT;
+
+ mutex_lock(&dev->struct_mutex);
+
+ pfn = (exynos_gem_obj->entry->paddr >> PAGE_SHIFT) + page_offset;
+
+ ret = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn);
+
+ mutex_unlock(&dev->struct_mutex);
+
+ return convert_to_vm_err_msg(ret);
+}
+
+int exynos_drm_gem_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ int ret;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /* set vm_area_struct. */
+ ret = drm_gem_mmap(filp, vma);
+ if (ret < 0) {
+ DRM_ERROR("failed to mmap.\n");
+ return ret;
+ }
+
+ vma->vm_flags &= ~VM_PFNMAP;
+ vma->vm_flags |= VM_MIXEDMAP;
+
+ return ret;
+}
+
+
+int exynos_drm_gem_dumb_destroy(struct drm_file *file_priv,
+ struct drm_device *dev, unsigned int handle)
+{
+ int ret;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ /*
+ * obj->refcount and obj->handle_count are decreased and
+ * if both them are 0 then exynos_drm_gem_free_object()
+ * would be called by callback to release resources.
+ */
+ ret = drm_gem_handle_delete(file_priv, handle);
+ if (ret < 0) {
+ DRM_ERROR("failed to delete drm_gem_handle.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DRM GEM Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h
new file mode 100644
index 0000000..e5fc014
--- /dev/null
+++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h
@@ -0,0 +1,107 @@
+/* exynos_drm_gem.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authoer: Inki Dae <inki.dae@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_GEM_H_
+#define _EXYNOS_DRM_GEM_H_
+
+#define to_exynos_gem_obj(x) container_of(x,\
+ struct exynos_drm_gem_obj, base)
+
+/*
+ * exynos drm buffer structure.
+ *
+ * @base: a gem object.
+ * - a new handle to this gem object would be created
+ * by drm_gem_handle_create().
+ * @entry: pointer to exynos drm buffer entry object.
+ * - containing the information to physically
+ * continuous memory region allocated by user request
+ * or at framebuffer creation.
+ *
+ * P.S. this object would be transfered to user as kms_bo.handle so
+ * user can access the buffer through kms_bo.handle.
+ */
+struct exynos_drm_gem_obj {
+ struct drm_gem_object base;
+ struct exynos_drm_buf_entry *entry;
+};
+
+/* create a new buffer and get a new gem handle. */
+struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv,
+ struct drm_device *dev, unsigned int size,
+ unsigned int *handle);
+
+/*
+ * request gem object creation and buffer allocation as the size
+ * that it is calculated with framebuffer information such as width,
+ * height and bpp.
+ */
+int exynos_drm_gem_create_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+/* get buffer offset to map to user space. */
+int exynos_drm_gem_map_offset_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+/* unmap a buffer from user space. */
+int exynos_drm_gem_munmap_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+/* initialize gem object. */
+int exynos_drm_gem_init_object(struct drm_gem_object *obj);
+
+/* free gem object. */
+void exynos_drm_gem_free_object(struct drm_gem_object *gem_obj);
+
+/* create memory region for drm framebuffer. */
+int exynos_drm_gem_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev, struct drm_mode_create_dumb *args);
+
+/* map memory region for drm framebuffer to user space. */
+int exynos_drm_gem_dumb_map_offset(struct drm_file *file_priv,
+ struct drm_device *dev, uint32_t handle, uint64_t *offset);
+
+/* page fault handler and mmap fault address(virtual) to physical memory. */
+int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
+
+/*
+ * mmap the physically continuous memory that a gem object contains
+ * to user space.
+ */
+int exynos_drm_gem_mmap_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+/* set vm_flags and we can change the vm attribute to other one at here. */
+int exynos_drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
+
+/*
+ * destroy memory region allocated.
+ * - a gem handle and physical memory region pointed by a gem object
+ * would be released by drm_gem_handle_delete().
+ */
+int exynos_drm_gem_dumb_destroy(struct drm_file *file_priv,
+ struct drm_device *dev, unsigned int handle);
+
+#endif
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index d3e8c54..1ca799a 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -227,7 +227,7 @@
default:
DRM_DEBUG_KMS("ch701x not detected, got %d: from %s "
"slave %d.\n",
- val, adapter->name,dvo->slave_addr);
+ val, adapter->name, dvo->slave_addr);
goto fail;
}
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
index 7eaa94e..4a03660 100644
--- a/drivers/gpu/drm/i915/dvo_ch7xxx.c
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -111,7 +111,7 @@
/** Reads an 8 bit register */
static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
- struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
+ struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
u8 out_buf[2];
u8 in_buf[2];
@@ -303,7 +303,7 @@
for (i = 0; i < CH7xxx_NUM_REGS; i++) {
uint8_t val;
- if ((i % 8) == 0 )
+ if ((i % 8) == 0)
DRM_LOG_KMS("\n %02X: ", i);
ch7xxx_readb(dvo, i, &val);
DRM_LOG_KMS("%02X ", val);
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index a12ed94..04f2893 100644
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -344,8 +344,8 @@
(adjusted_mode->hdisplay - 1)) >> 2;
y_ratio = (((mode->vdisplay - 1) << 16) /
(adjusted_mode->vdisplay - 1)) >> 2;
- ivch_write (dvo, VR42, x_ratio);
- ivch_write (dvo, VR41, y_ratio);
+ ivch_write(dvo, VR42, x_ratio);
+ ivch_write(dvo, VR41, y_ratio);
} else {
vr01 &= ~VR01_PANEL_FIT_ENABLE;
vr40 &= ~VR40_CLOCK_GATING_ENABLE;
@@ -410,7 +410,7 @@
}
}
-struct intel_dvo_dev_ops ivch_ops= {
+struct intel_dvo_dev_ops ivch_ops = {
.init = ivch_init,
.dpms = ivch_dpms,
.mode_valid = ivch_mode_valid,
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
index e4b4091d..a0b13a6 100644
--- a/drivers/gpu/drm/i915/dvo_sil164.c
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -104,7 +104,7 @@
static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
- struct sil164_priv *sil= dvo->dev_priv;
+ struct sil164_priv *sil = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
uint8_t out_buf[2];
struct i2c_msg msg = {
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 8ab2855..aa2cd3e 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -56,7 +56,7 @@
#define TFP410_CTL_2_MDI (1<<0)
#define TFP410_CTL_3 0x0A
-#define TFP410_CTL_3_DK_MASK (0x7<<5)
+#define TFP410_CTL_3_DK_MASK (0x7<<5)
#define TFP410_CTL_3_DK (1<<5)
#define TFP410_CTL_3_DKEN (1<<4)
#define TFP410_CTL_3_CTL_MASK (0x7<<1)
@@ -225,12 +225,12 @@
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- /* As long as the basics are set up, since we don't have clock dependencies
- * in the mode setup, we can just leave the registers alone and everything
- * will work fine.
- */
- /* don't do much */
- return;
+ /* As long as the basics are set up, since we don't have clock dependencies
+ * in the mode setup, we can just leave the registers alone and everything
+ * will work fine.
+ */
+ /* don't do much */
+ return;
}
/* set the tfp410 power state */
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 3c395a5..8e95d66 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -98,12 +98,12 @@
static const char *get_tiling_flag(struct drm_i915_gem_object *obj)
{
- switch (obj->tiling_mode) {
- default:
- case I915_TILING_NONE: return " ";
- case I915_TILING_X: return "X";
- case I915_TILING_Y: return "Y";
- }
+ switch (obj->tiling_mode) {
+ default:
+ case I915_TILING_NONE: return " ";
+ case I915_TILING_X: return "X";
+ case I915_TILING_Y: return "Y";
+ }
}
static const char *cache_level_str(int type)
@@ -217,7 +217,7 @@
++mappable_count; \
} \
} \
-} while(0)
+} while (0)
static int i915_gem_object_info(struct seq_file *m, void* data)
{
@@ -1293,12 +1293,12 @@
char buf[80];
int len;
- len = snprintf(buf, sizeof (buf),
+ len = snprintf(buf, sizeof(buf),
"wedged : %d\n",
atomic_read(&dev_priv->mm.wedged));
- if (len > sizeof (buf))
- len = sizeof (buf);
+ if (len > sizeof(buf))
+ len = sizeof(buf);
return simple_read_from_buffer(ubuf, max, ppos, buf, len);
}
@@ -1314,7 +1314,7 @@
int val = 1;
if (cnt > 0) {
- if (cnt > sizeof (buf) - 1)
+ if (cnt > sizeof(buf) - 1)
return -EINVAL;
if (copy_from_user(buf, ubuf, cnt))
@@ -1357,11 +1357,11 @@
char buf[80];
int len;
- len = snprintf(buf, sizeof (buf),
+ len = snprintf(buf, sizeof(buf),
"max freq: %d\n", dev_priv->max_delay * 50);
- if (len > sizeof (buf))
- len = sizeof (buf);
+ if (len > sizeof(buf))
+ len = sizeof(buf);
return simple_read_from_buffer(ubuf, max, ppos, buf, len);
}
@@ -1378,7 +1378,7 @@
int val = 1;
if (cnt > 0) {
- if (cnt > sizeof (buf) - 1)
+ if (cnt > sizeof(buf) - 1)
return -EINVAL;
if (copy_from_user(buf, ubuf, cnt))
@@ -1432,12 +1432,12 @@
snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
mutex_unlock(&dev_priv->dev->struct_mutex);
- len = snprintf(buf, sizeof (buf),
+ len = snprintf(buf, sizeof(buf),
"%d\n", (snpcr & GEN6_MBC_SNPCR_MASK) >>
GEN6_MBC_SNPCR_SHIFT);
- if (len > sizeof (buf))
- len = sizeof (buf);
+ if (len > sizeof(buf))
+ len = sizeof(buf);
return simple_read_from_buffer(ubuf, max, ppos, buf, len);
}
@@ -1455,7 +1455,7 @@
int val = 1;
if (cnt > 0) {
- if (cnt > sizeof (buf) - 1)
+ if (cnt > sizeof(buf) - 1)
return -EINVAL;
if (copy_from_user(buf, ubuf, cnt))
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 8a3942c..2eac955 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -884,7 +884,7 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
- dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+ dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!dev_priv->bridge_dev) {
DRM_ERROR("bridge device not found\n");
return -1;
@@ -1730,10 +1730,10 @@
*/
unsigned long i915_read_mch_val(void)
{
- struct drm_i915_private *dev_priv;
+ struct drm_i915_private *dev_priv;
unsigned long chipset_val, graphics_val, ret = 0;
- spin_lock(&mchdev_lock);
+ spin_lock(&mchdev_lock);
if (!i915_mch_dev)
goto out_unlock;
dev_priv = i915_mch_dev;
@@ -1744,9 +1744,9 @@
ret = chipset_val + graphics_val;
out_unlock:
- spin_unlock(&mchdev_lock);
+ spin_unlock(&mchdev_lock);
- return ret;
+ return ret;
}
EXPORT_SYMBOL_GPL(i915_read_mch_val);
@@ -1757,10 +1757,10 @@
*/
bool i915_gpu_raise(void)
{
- struct drm_i915_private *dev_priv;
+ struct drm_i915_private *dev_priv;
bool ret = true;
- spin_lock(&mchdev_lock);
+ spin_lock(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
@@ -1771,9 +1771,9 @@
dev_priv->max_delay--;
out_unlock:
- spin_unlock(&mchdev_lock);
+ spin_unlock(&mchdev_lock);
- return ret;
+ return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_raise);
@@ -1785,10 +1785,10 @@
*/
bool i915_gpu_lower(void)
{
- struct drm_i915_private *dev_priv;
+ struct drm_i915_private *dev_priv;
bool ret = true;
- spin_lock(&mchdev_lock);
+ spin_lock(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
@@ -1799,9 +1799,9 @@
dev_priv->max_delay++;
out_unlock:
- spin_unlock(&mchdev_lock);
+ spin_unlock(&mchdev_lock);
- return ret;
+ return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_lower);
@@ -1812,10 +1812,10 @@
*/
bool i915_gpu_busy(void)
{
- struct drm_i915_private *dev_priv;
+ struct drm_i915_private *dev_priv;
bool ret = false;
- spin_lock(&mchdev_lock);
+ spin_lock(&mchdev_lock);
if (!i915_mch_dev)
goto out_unlock;
dev_priv = i915_mch_dev;
@@ -1823,9 +1823,9 @@
ret = dev_priv->busy;
out_unlock:
- spin_unlock(&mchdev_lock);
+ spin_unlock(&mchdev_lock);
- return ret;
+ return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_busy);
@@ -1837,10 +1837,10 @@
*/
bool i915_gpu_turbo_disable(void)
{
- struct drm_i915_private *dev_priv;
+ struct drm_i915_private *dev_priv;
bool ret = true;
- spin_lock(&mchdev_lock);
+ spin_lock(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
@@ -1853,9 +1853,9 @@
ret = false;
out_unlock:
- spin_unlock(&mchdev_lock);
+ spin_unlock(&mchdev_lock);
- return ret;
+ return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
@@ -1948,7 +1948,7 @@
agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
- dev_priv->mm.gtt_mapping =
+ dev_priv->mm.gtt_mapping =
io_mapping_create_wc(dev->agp->base, agp_size);
if (dev_priv->mm.gtt_mapping == NULL) {
ret = -EIO;
@@ -2035,7 +2035,9 @@
spin_lock_init(&dev_priv->error_lock);
spin_lock_init(&dev_priv->rps_lock);
- if (IS_MOBILE(dev) || !IS_GEN2(dev))
+ if (IS_IVYBRIDGE(dev))
+ dev_priv->num_pipe = 3;
+ else if (IS_MOBILE(dev) || !IS_GEN2(dev))
dev_priv->num_pipe = 2;
else
dev_priv->num_pipe = 1;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index f07e425..4c8d681 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -79,11 +79,11 @@
"Use panel (LVDS/eDP) downclocking for power savings "
"(default: false)");
-unsigned int i915_panel_use_ssc __read_mostly = 1;
+unsigned int i915_panel_use_ssc __read_mostly = -1;
module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
- "(default: true)");
+ "(default: auto from VBT)");
int i915_vbt_sdvo_panel_type __read_mostly = -1;
module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
@@ -294,7 +294,7 @@
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
#define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00
-void intel_detect_pch (struct drm_device *dev)
+void intel_detect_pch(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct pci_dev *pch;
@@ -377,7 +377,7 @@
void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
{
- if (dev_priv->gt_fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES ) {
+ if (dev_priv->gt_fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
int loop = 500;
u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) {
@@ -471,6 +471,9 @@
error = i915_gem_init_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
+ if (HAS_PCH_SPLIT(dev))
+ ironlake_init_pch_refclk(dev);
+
drm_mode_config_reset(dev);
drm_irq_install(dev);
@@ -770,12 +773,12 @@
}
static const struct dev_pm_ops i915_pm_ops = {
- .suspend = i915_pm_suspend,
- .resume = i915_pm_resume,
- .freeze = i915_pm_freeze,
- .thaw = i915_pm_thaw,
- .poweroff = i915_pm_poweroff,
- .restore = i915_pm_resume,
+ .suspend = i915_pm_suspend,
+ .resume = i915_pm_resume,
+ .freeze = i915_pm_freeze,
+ .thaw = i915_pm_thaw,
+ .poweroff = i915_pm_poweroff,
+ .restore = i915_pm_resume,
};
static struct vm_operations_struct i915_gem_vm_ops = {
@@ -895,3 +898,43 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");
+
+/* We give fast paths for the really cool registers */
+#define NEEDS_FORCE_WAKE(dev_priv, reg) \
+ (((dev_priv)->info->gen >= 6) && \
+ ((reg) < 0x40000) && \
+ ((reg) != FORCEWAKE))
+
+#define __i915_read(x, y) \
+u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
+ u##x val = 0; \
+ if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
+ gen6_gt_force_wake_get(dev_priv); \
+ val = read##y(dev_priv->regs + reg); \
+ gen6_gt_force_wake_put(dev_priv); \
+ } else { \
+ val = read##y(dev_priv->regs + reg); \
+ } \
+ trace_i915_reg_rw(false, reg, val, sizeof(val)); \
+ return val; \
+}
+
+__i915_read(8, b)
+__i915_read(16, w)
+__i915_read(32, l)
+__i915_read(64, q)
+#undef __i915_read
+
+#define __i915_write(x, y) \
+void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
+ trace_i915_reg_rw(true, reg, val, sizeof(val)); \
+ if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
+ __gen6_gt_wait_for_fifo(dev_priv); \
+ } \
+ write##y(val, dev_priv->regs + reg); \
+}
+__i915_write(8, b)
+__i915_write(16, w)
+__i915_write(32, l)
+__i915_write(64, q)
+#undef __i915_write
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7916bd9..06a37f4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -139,7 +139,6 @@
u8 slave_addr;
u8 dvo_wiring;
u8 i2c_pin;
- u8 i2c_speed;
u8 ddc_pin;
};
@@ -209,6 +208,8 @@
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb);
+ void (*write_eld)(struct drm_connector *connector,
+ struct drm_crtc *crtc);
void (*fdi_link_train)(struct drm_crtc *crtc);
void (*init_clock_gating)(struct drm_device *dev);
void (*init_pch_clock_gating)(struct drm_device *dev);
@@ -226,26 +227,26 @@
struct intel_device_info {
u8 gen;
- u8 is_mobile : 1;
- u8 is_i85x : 1;
- u8 is_i915g : 1;
- u8 is_i945gm : 1;
- u8 is_g33 : 1;
- u8 need_gfx_hws : 1;
- u8 is_g4x : 1;
- u8 is_pineview : 1;
- u8 is_broadwater : 1;
- u8 is_crestline : 1;
- u8 is_ivybridge : 1;
- u8 has_fbc : 1;
- u8 has_pipe_cxsr : 1;
- u8 has_hotplug : 1;
- u8 cursor_needs_physical : 1;
- u8 has_overlay : 1;
- u8 overlay_needs_physical : 1;
- u8 supports_tv : 1;
- u8 has_bsd_ring : 1;
- u8 has_blt_ring : 1;
+ u8 is_mobile:1;
+ u8 is_i85x:1;
+ u8 is_i915g:1;
+ u8 is_i945gm:1;
+ u8 is_g33:1;
+ u8 need_gfx_hws:1;
+ u8 is_g4x:1;
+ u8 is_pineview:1;
+ u8 is_broadwater:1;
+ u8 is_crestline:1;
+ u8 is_ivybridge:1;
+ u8 has_fbc:1;
+ u8 has_pipe_cxsr:1;
+ u8 has_hotplug:1;
+ u8 cursor_needs_physical:1;
+ u8 has_overlay:1;
+ u8 overlay_needs_physical:1;
+ u8 supports_tv:1;
+ u8 has_bsd_ring:1;
+ u8 has_blt_ring:1;
};
enum no_fbc_reason {
@@ -347,7 +348,6 @@
/* LVDS info */
int backlight_level; /* restore backlight to this value */
bool backlight_enabled;
- struct drm_display_mode *panel_fixed_mode;
struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
@@ -357,6 +357,7 @@
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
unsigned int lvds_use_ssc:1;
+ unsigned int display_clock_mode:1;
int lvds_ssc_freq;
struct {
int rate;
@@ -672,10 +673,9 @@
unsigned int lvds_border_bits;
/* Panel fitter placement and size for Ironlake+ */
u32 pch_pf_pos, pch_pf_size;
- int panel_t3, panel_t12;
- struct drm_crtc *plane_to_crtc_mapping[2];
- struct drm_crtc *pipe_to_crtc_mapping[2];
+ struct drm_crtc *plane_to_crtc_mapping[3];
+ struct drm_crtc *pipe_to_crtc_mapping[3];
wait_queue_head_t pending_flip_queue;
bool flip_pending_is_done;
@@ -759,19 +759,19 @@
* (has pending rendering), and is not set if it's on inactive (ready
* to be unbound).
*/
- unsigned int active : 1;
+ unsigned int active:1;
/**
* This is set if the object has been written to since last bound
* to the GTT
*/
- unsigned int dirty : 1;
+ unsigned int dirty:1;
/**
* This is set if the object has been written to since the last
* GPU flush.
*/
- unsigned int pending_gpu_write : 1;
+ unsigned int pending_gpu_write:1;
/**
* Fence register bits (if any) for this object. Will be set
@@ -780,18 +780,18 @@
*
* Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE)
*/
- signed int fence_reg : 5;
+ signed int fence_reg:5;
/**
* Advice: are the backing pages purgeable?
*/
- unsigned int madv : 2;
+ unsigned int madv:2;
/**
* Current tiling mode for the object.
*/
- unsigned int tiling_mode : 2;
- unsigned int tiling_changed : 1;
+ unsigned int tiling_mode:2;
+ unsigned int tiling_changed:1;
/** How many users have pinned this object in GTT space. The following
* users can each hold at most one reference: pwrite/pread, pin_ioctl
@@ -802,22 +802,22 @@
*
* In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3
* bits with absolutely no headroom. So use 4 bits. */
- unsigned int pin_count : 4;
+ unsigned int pin_count:4;
#define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf
/**
* Is the object at the current location in the gtt mappable and
* fenceable? Used to avoid costly recalculations.
*/
- unsigned int map_and_fenceable : 1;
+ unsigned int map_and_fenceable:1;
/**
* Whether the current gtt mapping needs to be mappable (and isn't just
* mappable by accident). Track pin and fault separate for a more
* accurate mappable working set.
*/
- unsigned int fault_mappable : 1;
- unsigned int pin_mappable : 1;
+ unsigned int fault_mappable:1;
+ unsigned int pin_mappable:1;
/*
* Is the GPU currently using a fence to access this buffer,
@@ -1056,7 +1056,7 @@
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
-void intel_enable_asle (struct drm_device *dev);
+void intel_enable_asle(struct drm_device *dev);
#ifdef CONFIG_DEBUG_FS
extern void i915_destroy_error_state(struct drm_device *dev);
@@ -1146,7 +1146,7 @@
int i915_gem_mmap_gtt(struct drm_file *file_priv, struct drm_device *dev,
uint32_t handle, uint64_t *offset);
int i915_gem_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev,
- uint32_t handle);
+ uint32_t handle);
/**
* Returns true if seq1 is later than seq2.
*/
@@ -1301,10 +1301,11 @@
extern bool intel_fbc_enabled(struct drm_device *dev);
extern void intel_disable_fbc(struct drm_device *dev);
extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
+extern void ironlake_init_pch_refclk(struct drm_device *dev);
extern void ironlake_enable_rc6(struct drm_device *dev);
extern void gen6_set_rps(struct drm_device *dev, u8 val);
-extern void intel_detect_pch (struct drm_device *dev);
-extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
+extern void intel_detect_pch(struct drm_device *dev);
+extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
/* overlay */
#ifdef CONFIG_DEBUG_FS
@@ -1354,18 +1355,7 @@
((reg) != FORCEWAKE))
#define __i915_read(x, y) \
-static inline u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
- u##x val = 0; \
- if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
- gen6_gt_force_wake_get(dev_priv); \
- val = read##y(dev_priv->regs + reg); \
- gen6_gt_force_wake_put(dev_priv); \
- } else { \
- val = read##y(dev_priv->regs + reg); \
- } \
- trace_i915_reg_rw(false, reg, val, sizeof(val)); \
- return val; \
-}
+ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
__i915_read(8, b)
__i915_read(16, w)
@@ -1374,13 +1364,8 @@
#undef __i915_read
#define __i915_write(x, y) \
-static inline void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
- trace_i915_reg_rw(true, reg, val, sizeof(val)); \
- if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
- __gen6_gt_wait_for_fifo(dev_priv); \
- } \
- write##y(val, dev_priv->regs + reg); \
-}
+ void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val);
+
__i915_write(8, b)
__i915_write(16, w)
__i915_write(32, l)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index a546a71..6651c36 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -179,7 +179,7 @@
mutex_unlock(&dev->struct_mutex);
args->aper_size = dev_priv->mm.gtt_total;
- args->aper_available_size = args->aper_size -pinned;
+ args->aper_available_size = args->aper_size - pinned;
return 0;
}
@@ -195,6 +195,8 @@
u32 handle;
size = roundup(size, PAGE_SIZE);
+ if (size == 0)
+ return -EINVAL;
/* Allocate the new object */
obj = i915_gem_alloc_object(dev, size);
@@ -800,11 +802,11 @@
if (IS_ERR(page))
return PTR_ERR(page);
- vaddr = kmap_atomic(page, KM_USER0);
+ vaddr = kmap_atomic(page);
ret = __copy_from_user_inatomic(vaddr + page_offset,
user_data,
page_length);
- kunmap_atomic(vaddr, KM_USER0);
+ kunmap_atomic(vaddr);
set_page_dirty(page);
mark_page_accessed(page);
@@ -1265,74 +1267,6 @@
}
/**
- * i915_gem_create_mmap_offset - create a fake mmap offset for an object
- * @obj: obj in question
- *
- * GEM memory mapping works by handing back to userspace a fake mmap offset
- * it can use in a subsequent mmap(2) call. The DRM core code then looks
- * up the object based on the offset and sets up the various memory mapping
- * structures.
- *
- * This routine allocates and attaches a fake offset for @obj.
- */
-static int
-i915_gem_create_mmap_offset(struct drm_i915_gem_object *obj)
-{
- struct drm_device *dev = obj->base.dev;
- struct drm_gem_mm *mm = dev->mm_private;
- struct drm_map_list *list;
- struct drm_local_map *map;
- int ret = 0;
-
- /* Set the object up for mmap'ing */
- list = &obj->base.map_list;
- list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL);
- if (!list->map)
- return -ENOMEM;
-
- map = list->map;
- map->type = _DRM_GEM;
- map->size = obj->base.size;
- map->handle = obj;
-
- /* Get a DRM GEM mmap offset allocated... */
- list->file_offset_node = drm_mm_search_free(&mm->offset_manager,
- obj->base.size / PAGE_SIZE,
- 0, 0);
- if (!list->file_offset_node) {
- DRM_ERROR("failed to allocate offset for bo %d\n",
- obj->base.name);
- ret = -ENOSPC;
- goto out_free_list;
- }
-
- list->file_offset_node = drm_mm_get_block(list->file_offset_node,
- obj->base.size / PAGE_SIZE,
- 0);
- if (!list->file_offset_node) {
- ret = -ENOMEM;
- goto out_free_list;
- }
-
- list->hash.key = list->file_offset_node->start;
- ret = drm_ht_insert_item(&mm->offset_hash, &list->hash);
- if (ret) {
- DRM_ERROR("failed to add to map hash\n");
- goto out_free_mm;
- }
-
- return 0;
-
-out_free_mm:
- drm_mm_put_block(list->file_offset_node);
-out_free_list:
- kfree(list->map);
- list->map = NULL;
-
- return ret;
-}
-
-/**
* i915_gem_release_mmap - remove physical page mappings
* @obj: obj in question
*
@@ -1360,19 +1294,6 @@
obj->fault_mappable = false;
}
-static void
-i915_gem_free_mmap_offset(struct drm_i915_gem_object *obj)
-{
- struct drm_device *dev = obj->base.dev;
- struct drm_gem_mm *mm = dev->mm_private;
- struct drm_map_list *list = &obj->base.map_list;
-
- drm_ht_remove_item(&mm->offset_hash, &list->hash);
- drm_mm_put_block(list->file_offset_node);
- kfree(list->map);
- list->map = NULL;
-}
-
static uint32_t
i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode)
{
@@ -1485,7 +1406,7 @@
}
if (!obj->base.map_list.map) {
- ret = i915_gem_create_mmap_offset(obj);
+ ret = drm_gem_create_mmap_offset(&obj->base);
if (ret)
goto out;
}
@@ -1557,7 +1478,7 @@
obj->pages[i] = page;
}
- if (obj->tiling_mode != I915_TILING_NONE)
+ if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_do_bit_17_swizzle(obj);
return 0;
@@ -1579,7 +1500,7 @@
BUG_ON(obj->madv == __I915_MADV_PURGED);
- if (obj->tiling_mode != I915_TILING_NONE)
+ if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_save_bit_17_swizzle(obj);
if (obj->madv == I915_MADV_DONTNEED)
@@ -1856,7 +1777,7 @@
* lost bo to the inactive list.
*/
while (!list_empty(&dev_priv->mm.flushing_list)) {
- obj= list_first_entry(&dev_priv->mm.flushing_list,
+ obj = list_first_entry(&dev_priv->mm.flushing_list,
struct drm_i915_gem_object,
mm_list);
@@ -1922,7 +1843,7 @@
while (!list_empty(&ring->active_list)) {
struct drm_i915_gem_object *obj;
- obj= list_first_entry(&ring->active_list,
+ obj = list_first_entry(&ring->active_list,
struct drm_i915_gem_object,
ring_list);
@@ -2272,14 +2193,8 @@
i915_gpu_idle(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- bool lists_empty;
int ret, i;
- lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->mm.active_list));
- if (lists_empty)
- return 0;
-
/* Flush everything onto the inactive list. */
for (i = 0; i < I915_NUM_RINGS; i++) {
ret = i915_ring_idle(&dev_priv->ring[i]);
@@ -2882,7 +2797,7 @@
fenceable =
obj->gtt_space->size == fence_size &&
- (obj->gtt_space->start & (fence_alignment -1)) == 0;
+ (obj->gtt_space->start & (fence_alignment - 1)) == 0;
mappable =
obj->gtt_offset + obj->base.size <= dev_priv->mm.gtt_mappable_end;
@@ -3598,7 +3513,7 @@
*/
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request)
- ret = i915_add_request(obj->ring, NULL,request);
+ ret = i915_add_request(obj->ring, NULL, request);
else
ret = -ENOMEM;
}
@@ -3623,7 +3538,7 @@
i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- return i915_gem_ring_throttle(dev, file_priv);
+ return i915_gem_ring_throttle(dev, file_priv);
}
int
@@ -3752,7 +3667,7 @@
trace_i915_gem_object_destroy(obj);
if (obj->base.map_list.map)
- i915_gem_free_mmap_offset(obj);
+ drm_gem_free_mmap_offset(&obj->base);
drm_gem_object_release(&obj->base);
i915_gem_info_remove_obj(dev_priv, obj->base.size);
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
index 8da1899..cc93cac 100644
--- a/drivers/gpu/drm/i915/i915_gem_debug.c
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -72,7 +72,7 @@
break;
} else if (!obj->active ||
(obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0 ||
- list_empty(&obj->gpu_write_list)){
+ list_empty(&obj->gpu_write_list)) {
DRM_ERROR("invalid flushing %p (a %d w %x gwl %d)\n",
obj,
obj->active,
@@ -157,7 +157,7 @@
for (page = 0; page < obj->size / PAGE_SIZE; page++) {
int i;
- backing_map = kmap_atomic(obj->pages[page], KM_USER0);
+ backing_map = kmap_atomic(obj->pages[page]);
if (backing_map == NULL) {
DRM_ERROR("failed to map backing page\n");
@@ -181,13 +181,13 @@
}
}
}
- kunmap_atomic(backing_map, KM_USER0);
+ kunmap_atomic(backing_map);
backing_map = NULL;
}
out:
if (backing_map != NULL)
- kunmap_atomic(backing_map, KM_USER0);
+ kunmap_atomic(backing_map);
iounmap(gtt_mapping);
/* give syslog time to catch up */
diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index da05a2692..ead5d00 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -122,7 +122,7 @@
goto found;
}
list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
- if (! obj->base.write_domain || obj->pin_count)
+ if (!obj->base.write_domain || obj->pin_count)
continue;
if (mark_free(obj, &unwind_list))
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 4934cf8..3693e83 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -784,7 +784,8 @@
}
from->sync_seqno[idx] = seqno;
- return intel_ring_sync(to, from, seqno - 1);
+
+ return to->sync_to(to, from, seqno - 1);
}
static int
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 7a709cd..6042c5e 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -49,6 +49,28 @@
}
}
+static bool do_idling(struct drm_i915_private *dev_priv)
+{
+ bool ret = dev_priv->mm.interruptible;
+
+ if (unlikely(dev_priv->mm.gtt->do_idle_maps)) {
+ dev_priv->mm.interruptible = false;
+ if (i915_gpu_idle(dev_priv->dev)) {
+ DRM_ERROR("Couldn't idle GPU\n");
+ /* Wait a bit, in hopes it avoids the hang */
+ udelay(10);
+ }
+ }
+
+ return ret;
+}
+
+static void undo_idling(struct drm_i915_private *dev_priv, bool interruptible)
+{
+ if (unlikely(dev_priv->mm.gtt->do_idle_maps))
+ dev_priv->mm.interruptible = interruptible;
+}
+
void i915_gem_restore_gtt_mappings(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -117,6 +139,12 @@
void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
{
+ struct drm_device *dev = obj->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ bool interruptible;
+
+ interruptible = do_idling(dev_priv);
+
intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
obj->base.size >> PAGE_SHIFT);
@@ -124,4 +152,6 @@
intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
obj->sg_list = NULL;
}
+
+ undo_idling(dev_priv, interruptible);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 99c4faa..31d334d 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -92,7 +92,10 @@
uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
- if (INTEL_INFO(dev)->gen >= 5) {
+ if (INTEL_INFO(dev)->gen >= 6) {
+ swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+ swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+ } else if (IS_GEN5(dev)) {
/* On Ironlake whatever DRAM config, GPU always do
* same swizzling setup.
*/
@@ -440,14 +443,9 @@
void
i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj)
{
- struct drm_device *dev = obj->base.dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
int page_count = obj->base.size >> PAGE_SHIFT;
int i;
- if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
- return;
-
if (obj->bit_17 == NULL)
return;
@@ -464,14 +462,9 @@
void
i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj)
{
- struct drm_device *dev = obj->base.dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
int page_count = obj->base.size >> PAGE_SHIFT;
int i;
- if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
- return;
-
if (obj->bit_17 == NULL) {
obj->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
sizeof(long), GFP_KERNEL);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9cbb0cd..9ee2729 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -383,6 +383,7 @@
pm_iir = dev_priv->pm_iir;
dev_priv->pm_iir = 0;
pm_imr = I915_READ(GEN6_PMIMR);
+ I915_WRITE(GEN6_PMIMR, 0);
spin_unlock_irq(&dev_priv->rps_lock);
if (!pm_iir)
@@ -420,7 +421,6 @@
* an *extremely* unlikely race with gen6_rps_enable() that is prevented
* by holding struct_mutex for the duration of the write.
*/
- I915_WRITE(GEN6_PMIMR, pm_imr & ~pm_iir);
mutex_unlock(&dev_priv->dev->struct_mutex);
}
@@ -536,8 +536,9 @@
unsigned long flags;
spin_lock_irqsave(&dev_priv->rps_lock, flags);
WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
- I915_WRITE(GEN6_PMIMR, pm_iir);
dev_priv->pm_iir |= pm_iir;
+ I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
+ POSTING_READ(GEN6_PMIMR);
spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
queue_work(dev_priv->wq, &dev_priv->rps_work);
}
@@ -649,8 +650,9 @@
unsigned long flags;
spin_lock_irqsave(&dev_priv->rps_lock, flags);
WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
- I915_WRITE(GEN6_PMIMR, pm_iir);
dev_priv->pm_iir |= pm_iir;
+ I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
+ POSTING_READ(GEN6_PMIMR);
spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
queue_work(dev_priv->wq, &dev_priv->rps_work);
}
@@ -711,7 +713,7 @@
page_count = src->base.size / PAGE_SIZE;
- dst = kmalloc(sizeof(*dst) + page_count * sizeof (u32 *), GFP_ATOMIC);
+ dst = kmalloc(sizeof(*dst) + page_count * sizeof(u32 *), GFP_ATOMIC);
if (dst == NULL)
return NULL;
@@ -1493,7 +1495,7 @@
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_enable_display_irq(dev_priv, (pipe == 0) ?
- DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
+ DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
@@ -1541,7 +1543,7 @@
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
- DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
+ DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
@@ -1777,6 +1779,26 @@
POSTING_READ(SDEIER);
}
+/*
+ * Enable digital hotplug on the PCH, and configure the DP short pulse
+ * duration to 2ms (which is the minimum in the Display Port spec)
+ *
+ * This register is the same on all known PCH chips.
+ */
+
+static void ironlake_enable_pch_hotplug(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 hotplug;
+
+ hotplug = I915_READ(PCH_PORT_HOTPLUG);
+ hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
+ hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
+ hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms;
+ hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms;
+ I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
+}
+
static int ironlake_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1839,6 +1861,8 @@
I915_WRITE(SDEIER, hotplug_mask);
POSTING_READ(SDEIER);
+ ironlake_enable_pch_hotplug(dev);
+
if (IS_IRONLAKE_M(dev)) {
/* Clear & enable PCU event interrupts */
I915_WRITE(DEIIR, DE_PCU_EVENT);
@@ -1896,6 +1920,8 @@
I915_WRITE(SDEIER, hotplug_mask);
POSTING_READ(SDEIER);
+ ironlake_enable_pch_hotplug(dev);
+
return 0;
}
@@ -2020,6 +2046,10 @@
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
I915_WRITE(GTIIR, I915_READ(GTIIR));
+
+ I915_WRITE(SDEIMR, 0xffffffff);
+ I915_WRITE(SDEIER, 0x0);
+ I915_WRITE(SDEIIR, I915_READ(SDEIIR));
}
static void i915_driver_irq_uninstall(struct drm_device * dev)
diff --git a/drivers/gpu/drm/i915/i915_mem.c b/drivers/gpu/drm/i915/i915_mem.c
index 83b7b81..cc8f6d4 100644
--- a/drivers/gpu/drm/i915/i915_mem.c
+++ b/drivers/gpu/drm/i915/i915_mem.c
@@ -202,7 +202,7 @@
blocks->next = blocks->prev = *heap;
memset(*heap, 0, sizeof(**heap));
- (*heap)->file_priv = (struct drm_file *) - 1;
+ (*heap)->file_priv = (struct drm_file *) -1;
(*heap)->next = (*heap)->prev = blocks;
return 0;
}
@@ -359,19 +359,19 @@
return init_heap(heap, initheap->start, initheap->size);
}
-int i915_mem_destroy_heap( struct drm_device *dev, void *data,
- struct drm_file *file_priv )
+int i915_mem_destroy_heap(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_mem_destroy_heap_t *destroyheap = data;
struct mem_block **heap;
- if ( !dev_priv ) {
- DRM_ERROR( "called with no initialization\n" );
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
- heap = get_heap( dev_priv, destroyheap->region );
+ heap = get_heap(dev_priv, destroyheap->region);
if (!heap) {
DRM_ERROR("get_heap failed");
return -EFAULT;
@@ -382,6 +382,6 @@
return -EFAULT;
}
- i915_mem_takedown( heap );
+ i915_mem_takedown(heap);
return 0;
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 542453f..5a09416 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -156,7 +156,7 @@
#define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0)
#define MI_SUSPEND_FLUSH_EN (1<<0)
#define MI_REPORT_HEAD MI_INSTR(0x07, 0)
-#define MI_OVERLAY_FLIP MI_INSTR(0x11,0)
+#define MI_OVERLAY_FLIP MI_INSTR(0x11, 0)
#define MI_OVERLAY_CONTINUE (0x0<<21)
#define MI_OVERLAY_ON (0x1<<21)
#define MI_OVERLAY_OFF (0x2<<21)
@@ -194,6 +194,13 @@
#define MI_SEMAPHORE_UPDATE (1<<21)
#define MI_SEMAPHORE_COMPARE (1<<20)
#define MI_SEMAPHORE_REGISTER (1<<18)
+#define MI_SEMAPHORE_SYNC_RV (2<<16)
+#define MI_SEMAPHORE_SYNC_RB (0<<16)
+#define MI_SEMAPHORE_SYNC_VR (0<<16)
+#define MI_SEMAPHORE_SYNC_VB (2<<16)
+#define MI_SEMAPHORE_SYNC_BR (2<<16)
+#define MI_SEMAPHORE_SYNC_BV (0<<16)
+#define MI_SEMAPHORE_SYNC_INVALID (1<<0)
/*
* 3D instructions used by the kernel
*/
@@ -235,16 +242,22 @@
#define ASYNC_FLIP (1<<22)
#define DISPLAY_PLANE_A (0<<20)
#define DISPLAY_PLANE_B (1<<20)
-#define GFX_OP_PIPE_CONTROL ((0x3<<29)|(0x3<<27)|(0x2<<24)|2)
-#define PIPE_CONTROL_QW_WRITE (1<<14)
-#define PIPE_CONTROL_DEPTH_STALL (1<<13)
-#define PIPE_CONTROL_WC_FLUSH (1<<12)
-#define PIPE_CONTROL_IS_FLUSH (1<<11) /* MBZ on Ironlake */
-#define PIPE_CONTROL_TC_FLUSH (1<<10) /* GM45+ only */
-#define PIPE_CONTROL_ISP_DIS (1<<9)
-#define PIPE_CONTROL_NOTIFY (1<<8)
+#define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2))
+#define PIPE_CONTROL_CS_STALL (1<<20)
+#define PIPE_CONTROL_QW_WRITE (1<<14)
+#define PIPE_CONTROL_DEPTH_STALL (1<<13)
+#define PIPE_CONTROL_WRITE_FLUSH (1<<12)
+#define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */
+#define PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE (1<<11) /* MBZ on Ironlake */
+#define PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE (1<<10) /* GM45+ only */
+#define PIPE_CONTROL_INDIRECT_STATE_DISABLE (1<<9)
+#define PIPE_CONTROL_NOTIFY (1<<8)
+#define PIPE_CONTROL_VF_CACHE_INVALIDATE (1<<4)
+#define PIPE_CONTROL_CONST_CACHE_INVALIDATE (1<<3)
+#define PIPE_CONTROL_STATE_CACHE_INVALIDATE (1<<2)
+#define PIPE_CONTROL_STALL_AT_SCOREBOARD (1<<1)
+#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0)
#define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
-#define PIPE_CONTROL_STALL_EN (1<<1) /* in addr word, Ironlake+ only */
/*
@@ -296,6 +309,12 @@
#define RING_CTL(base) ((base)+0x3c)
#define RING_SYNC_0(base) ((base)+0x40)
#define RING_SYNC_1(base) ((base)+0x44)
+#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE))
+#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE))
+#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE))
+#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE))
+#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE))
+#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE))
#define RING_MAX_IDLE(base) ((base)+0x54)
#define RING_HWS_PGA(base) ((base)+0x80)
#define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
@@ -470,7 +489,7 @@
/* Enables non-sequential data reads through arbiter
*/
-#define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9)
+#define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9)
/* Disable FSB snooping of cacheable write cycles from binner/render
* command stream
@@ -626,7 +645,7 @@
#define ILK_DISPLAY_CHICKEN1 0x42000
#define ILK_FBCQ_DIS (1<<22)
-#define ILK_PABSTRETCH_DIS (1<<21)
+#define ILK_PABSTRETCH_DIS (1<<21)
/*
@@ -2358,7 +2377,7 @@
#define DSPFW1 0x70034
#define DSPFW_SR_SHIFT 23
-#define DSPFW_SR_MASK (0x1ff<<23)
+#define DSPFW_SR_MASK (0x1ff<<23)
#define DSPFW_CURSORB_SHIFT 16
#define DSPFW_CURSORB_MASK (0x3f<<16)
#define DSPFW_PLANEB_SHIFT 8
@@ -2416,6 +2435,7 @@
#define WM0_PIPE_CURSOR_MASK (0x1f)
#define WM0_PIPEB_ILK 0x45104
+#define WM0_PIPEC_IVB 0x45200
#define WM1_LP_ILK 0x45108
#define WM1_LP_SR_EN (1<<31)
#define WM1_LP_LATENCY_SHIFT 24
@@ -2554,10 +2574,18 @@
#define _CURBBASE 0x700c4
#define _CURBPOS 0x700c8
+#define _CURBCNTR_IVB 0x71080
+#define _CURBBASE_IVB 0x71084
+#define _CURBPOS_IVB 0x71088
+
#define CURCNTR(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR)
#define CURBASE(pipe) _PIPE(pipe, _CURABASE, _CURBBASE)
#define CURPOS(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS)
+#define CURCNTR_IVB(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR_IVB)
+#define CURBASE_IVB(pipe) _PIPE(pipe, _CURABASE, _CURBBASE_IVB)
+#define CURPOS_IVB(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS_IVB)
+
/* Display A control */
#define _DSPACNTR 0x70180
#define DISPLAY_PLANE_ENABLE (1<<31)
@@ -2903,12 +2931,13 @@
#define SDEIER 0xc400c
/* digital port hotplug */
-#define PCH_PORT_HOTPLUG 0xc4030
+#define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */
#define PORTD_HOTPLUG_ENABLE (1 << 20)
#define PORTD_PULSE_DURATION_2ms (0)
#define PORTD_PULSE_DURATION_4_5ms (1 << 18)
#define PORTD_PULSE_DURATION_6ms (2 << 18)
#define PORTD_PULSE_DURATION_100ms (3 << 18)
+#define PORTD_PULSE_DURATION_MASK (3 << 18)
#define PORTD_HOTPLUG_NO_DETECT (0)
#define PORTD_HOTPLUG_SHORT_DETECT (1 << 16)
#define PORTD_HOTPLUG_LONG_DETECT (1 << 17)
@@ -2917,6 +2946,7 @@
#define PORTC_PULSE_DURATION_4_5ms (1 << 10)
#define PORTC_PULSE_DURATION_6ms (2 << 10)
#define PORTC_PULSE_DURATION_100ms (3 << 10)
+#define PORTC_PULSE_DURATION_MASK (3 << 10)
#define PORTC_HOTPLUG_NO_DETECT (0)
#define PORTC_HOTPLUG_SHORT_DETECT (1 << 8)
#define PORTC_HOTPLUG_LONG_DETECT (1 << 9)
@@ -2925,6 +2955,7 @@
#define PORTB_PULSE_DURATION_4_5ms (1 << 2)
#define PORTB_PULSE_DURATION_6ms (2 << 2)
#define PORTB_PULSE_DURATION_100ms (3 << 2)
+#define PORTB_PULSE_DURATION_MASK (3 << 2)
#define PORTB_HOTPLUG_NO_DETECT (0)
#define PORTB_HOTPLUG_SHORT_DETECT (1 << 0)
#define PORTB_HOTPLUG_LONG_DETECT (1 << 1)
@@ -2945,15 +2976,15 @@
#define _PCH_DPLL_A 0xc6014
#define _PCH_DPLL_B 0xc6018
-#define PCH_DPLL(pipe) _PIPE(pipe, _PCH_DPLL_A, _PCH_DPLL_B)
+#define PCH_DPLL(pipe) (pipe == 0 ? _PCH_DPLL_A : _PCH_DPLL_B)
#define _PCH_FPA0 0xc6040
#define FP_CB_TUNE (0x3<<22)
#define _PCH_FPA1 0xc6044
#define _PCH_FPB0 0xc6048
#define _PCH_FPB1 0xc604c
-#define PCH_FP0(pipe) _PIPE(pipe, _PCH_FPA0, _PCH_FPB0)
-#define PCH_FP1(pipe) _PIPE(pipe, _PCH_FPA1, _PCH_FPB1)
+#define PCH_FP0(pipe) (pipe == 0 ? _PCH_FPA0 : _PCH_FPB0)
+#define PCH_FP1(pipe) (pipe == 0 ? _PCH_FPA1 : _PCH_FPB1)
#define PCH_DPLL_TEST 0xc606c
@@ -3167,6 +3198,7 @@
#define FDI_LINK_TRAIN_NONE_IVB (3<<8)
/* both Tx and Rx */
+#define FDI_COMPOSITE_SYNC (1<<11)
#define FDI_LINK_TRAIN_AUTO (1<<10)
#define FDI_SCRAMBLING_ENABLE (0<<7)
#define FDI_SCRAMBLING_DISABLE (1<<7)
@@ -3308,15 +3340,35 @@
#define PCH_PP_STATUS 0xc7200
#define PCH_PP_CONTROL 0xc7204
#define PANEL_UNLOCK_REGS (0xabcd << 16)
+#define PANEL_UNLOCK_MASK (0xffff << 16)
#define EDP_FORCE_VDD (1 << 3)
#define EDP_BLC_ENABLE (1 << 2)
#define PANEL_POWER_RESET (1 << 1)
#define PANEL_POWER_OFF (0 << 0)
#define PANEL_POWER_ON (1 << 0)
#define PCH_PP_ON_DELAYS 0xc7208
+#define PANEL_PORT_SELECT_MASK (3 << 30)
+#define PANEL_PORT_SELECT_LVDS (0 << 30)
+#define PANEL_PORT_SELECT_DPA (1 << 30)
#define EDP_PANEL (1 << 30)
+#define PANEL_PORT_SELECT_DPC (2 << 30)
+#define PANEL_PORT_SELECT_DPD (3 << 30)
+#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000)
+#define PANEL_POWER_UP_DELAY_SHIFT 16
+#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff)
+#define PANEL_LIGHT_ON_DELAY_SHIFT 0
+
#define PCH_PP_OFF_DELAYS 0xc720c
+#define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000)
+#define PANEL_POWER_DOWN_DELAY_SHIFT 16
+#define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff)
+#define PANEL_LIGHT_OFF_DELAY_SHIFT 0
+
#define PCH_PP_DIVISOR 0xc7210
+#define PP_REFERENCE_DIVIDER_MASK (0xffffff00)
+#define PP_REFERENCE_DIVIDER_SHIFT 8
+#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f)
+#define PANEL_POWER_CYCLE_DELAY_SHIFT 0
#define PCH_DP_B 0xe4100
#define PCH_DPB_AUX_CH_CTL 0xe4110
@@ -3470,4 +3522,29 @@
#define GEN6_PCODE_DATA 0x138128
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
+#define G4X_AUD_VID_DID 0x62020
+#define INTEL_AUDIO_DEVCL 0x808629FB
+#define INTEL_AUDIO_DEVBLC 0x80862801
+#define INTEL_AUDIO_DEVCTG 0x80862802
+
+#define G4X_AUD_CNTL_ST 0x620B4
+#define G4X_ELDV_DEVCL_DEVBLC (1 << 13)
+#define G4X_ELDV_DEVCTG (1 << 14)
+#define G4X_ELD_ADDR (0xf << 5)
+#define G4X_ELD_ACK (1 << 4)
+#define G4X_HDMIW_HDMIEDID 0x6210C
+
+#define GEN5_HDMIW_HDMIEDID_A 0xE2050
+#define GEN5_AUD_CNTL_ST_A 0xE20B4
+#define GEN5_ELD_BUFFER_SIZE (0x1f << 10)
+#define GEN5_ELD_ADDRESS (0x1f << 5)
+#define GEN5_ELD_ACK (1 << 4)
+#define GEN5_AUD_CNTL_ST2 0xE20C0
+#define GEN5_ELD_VALIDB (1 << 0)
+#define GEN5_CP_READYB (1 << 1)
+
+#define GEN7_HDMIW_HDMIEDID_A 0xE5050
+#define GEN7_AUD_CNTRL_ST_A 0xE50B4
+#define GEN7_AUD_CNTRL_ST2 0xE50C0
+
#endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index f107423..f8f602d 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -60,7 +60,7 @@
else
array = dev_priv->save_palette_b;
- for(i = 0; i < 256; i++)
+ for (i = 0; i < 256; i++)
array[i] = I915_READ(reg + (i << 2));
}
@@ -82,7 +82,7 @@
else
array = dev_priv->save_palette_b;
- for(i = 0; i < 256; i++)
+ for (i = 0; i < 256; i++)
I915_WRITE(reg + (i << 2), array[i]);
}
@@ -887,10 +887,10 @@
mutex_lock(&dev->struct_mutex);
/* Cache mode state */
- I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
+ I915_WRITE(CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
/* Memory arbitration state */
- I915_WRITE (MI_ARB_STATE, dev_priv->saveMI_ARB_STATE | 0xffff0000);
+ I915_WRITE(MI_ARB_STATE, dev_priv->saveMI_ARB_STATE | 0xffff0000);
for (i = 0; i < 16; i++) {
I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]);
diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h
index d623fef..dac7bba 100644
--- a/drivers/gpu/drm/i915/i915_trace.h
+++ b/drivers/gpu/drm/i915/i915_trace.h
@@ -385,29 +385,29 @@
);
TRACE_EVENT(i915_reg_rw,
- TP_PROTO(bool write, u32 reg, u64 val, int len),
+ TP_PROTO(bool write, u32 reg, u64 val, int len),
- TP_ARGS(write, reg, val, len),
+ TP_ARGS(write, reg, val, len),
- TP_STRUCT__entry(
- __field(u64, val)
- __field(u32, reg)
- __field(u16, write)
- __field(u16, len)
- ),
+ TP_STRUCT__entry(
+ __field(u64, val)
+ __field(u32, reg)
+ __field(u16, write)
+ __field(u16, len)
+ ),
- TP_fast_assign(
- __entry->val = (u64)val;
- __entry->reg = reg;
- __entry->write = write;
- __entry->len = len;
- ),
+ TP_fast_assign(
+ __entry->val = (u64)val;
+ __entry->reg = reg;
+ __entry->write = write;
+ __entry->len = len;
+ ),
- TP_printk("%s reg=0x%x, len=%d, val=(0x%x, 0x%x)",
- __entry->write ? "write" : "read",
- __entry->reg, __entry->len,
- (u32)(__entry->val & 0xffffffff),
- (u32)(__entry->val >> 32))
+ TP_printk("%s reg=0x%x, len=%d, val=(0x%x, 0x%x)",
+ __entry->write ? "write" : "read",
+ __entry->reg, __entry->len,
+ (u32)(__entry->val & 0xffffffff),
+ (u32)(__entry->val >> 32))
);
#endif /* _I915_TRACE_H_ */
diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c
index 2cb8e0b9..cb91210 100644
--- a/drivers/gpu/drm/i915/intel_acpi.c
+++ b/drivers/gpu/drm/i915/intel_acpi.c
@@ -64,7 +64,7 @@
case ACPI_TYPE_BUFFER:
if (obj->buffer.length == 4) {
- result =(obj->buffer.pointer[0] |
+ result = (obj->buffer.pointer[0] |
(obj->buffer.pointer[1] << 8) |
(obj->buffer.pointer[2] << 16) |
(obj->buffer.pointer[3] << 24));
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 61abef8a..63880e2 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -1,5 +1,5 @@
/*
- * Copyright © 2006 Intel Corporation
+ * Copyright © 2006 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
@@ -309,6 +309,13 @@
dev_priv->lvds_use_ssc = general->enable_ssc;
dev_priv->lvds_ssc_freq =
intel_bios_ssc_frequency(dev, general->ssc_freq);
+ dev_priv->display_clock_mode = general->display_clock_mode;
+ DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d\n",
+ dev_priv->int_tv_support,
+ dev_priv->int_crt_support,
+ dev_priv->lvds_use_ssc,
+ dev_priv->lvds_ssc_freq,
+ dev_priv->display_clock_mode);
}
}
@@ -381,7 +388,7 @@
if (p_child->dvo_port != DEVICE_PORT_DVOB &&
p_child->dvo_port != DEVICE_PORT_DVOC) {
/* skip the incorrect SDVO port */
- DRM_DEBUG_KMS("Incorrect SDVO port. Skip it \n");
+ DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
continue;
}
DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
@@ -396,15 +403,13 @@
p_mapping->dvo_wiring = p_child->dvo_wiring;
p_mapping->ddc_pin = p_child->ddc_pin;
p_mapping->i2c_pin = p_child->i2c_pin;
- p_mapping->i2c_speed = p_child->i2c_speed;
p_mapping->initialized = 1;
- DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d, i2c_speed=%d\n",
+ DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
p_mapping->dvo_port,
p_mapping->slave_addr,
p_mapping->dvo_wiring,
p_mapping->ddc_pin,
- p_mapping->i2c_pin,
- p_mapping->i2c_speed);
+ p_mapping->i2c_pin);
} else {
DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
"two SDVO device.\n");
@@ -564,7 +569,7 @@
count++;
}
if (!count) {
- DRM_DEBUG_KMS("no child dev is parsed from VBT \n");
+ DRM_DEBUG_KMS("no child dev is parsed from VBT\n");
return;
}
dev_priv->child_dev = kzalloc(sizeof(*p_child) * count, GFP_KERNEL);
@@ -610,7 +615,7 @@
/* Default to using SSC */
dev_priv->lvds_use_ssc = 1;
dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
- DRM_DEBUG("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
+ DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
/* eDP data */
dev_priv->edp.bpp = 18;
@@ -639,7 +644,7 @@
if (dev_priv->opregion.vbt) {
struct vbt_header *vbt = dev_priv->opregion.vbt;
if (memcmp(vbt->signature, "$VBT", 4) == 0) {
- DRM_DEBUG_DRIVER("Using VBT from OpRegion: %20s\n",
+ DRM_DEBUG_KMS("Using VBT from OpRegion: %20s\n",
vbt->signature);
bdb = (struct bdb_header *)((char *)vbt + vbt->bdb_offset);
} else
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 5f8e4ed..8af3735 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -1,5 +1,5 @@
/*
- * Copyright © 2006 Intel Corporation
+ * Copyright © 2006 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
@@ -120,7 +120,9 @@
u8 ssc_freq:1;
u8 enable_lfp_on_override:1;
u8 disable_ssc_ddt:1;
- u8 rsvd8:3; /* finish byte */
+ u8 rsvd7:1;
+ u8 display_clock_mode:1;
+ u8 rsvd8:1; /* finish byte */
/* bits 3 */
u8 disable_smooth_vision:1;
@@ -133,7 +135,10 @@
/* bits 5 */
u8 int_crt_support:1;
u8 int_tv_support:1;
- u8 rsvd11:6; /* finish byte */
+ u8 int_efp_support:1;
+ u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */
+ u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */
+ u8 rsvd11:3; /* finish byte */
} __attribute__((packed));
/* pre-915 */
@@ -197,8 +202,7 @@
struct child_device_config {
u16 handle;
u16 device_type;
- u8 i2c_speed;
- u8 rsvd[9];
+ u8 device_id[10]; /* ascii string */
u16 addin_offset;
u8 dvo_port; /* See Device_PORT_* above */
u8 i2c_pin;
@@ -240,7 +244,7 @@
* And the device num is related with the size of general definition
* block. It is obtained by using the following formula:
* number = (block_size - sizeof(bdb_general_definitions))/
- * sizeof(child_device_config);
+ * sizeof(child_device_config);
*/
struct child_device_config devices[0];
} __attribute__((packed));
@@ -446,11 +450,11 @@
#define EDP_VSWING_1_2V 3
struct edp_power_seq {
- u16 t3;
- u16 t7;
+ u16 t1_t3;
+ u16 t8;
u16 t9;
u16 t10;
- u16 t12;
+ u16 t11_t12;
} __attribute__ ((packed));
struct edp_link_params {
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 0979d88..fee0ad0 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -69,7 +69,7 @@
temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
temp &= ~ADPA_DAC_ENABLE;
- switch(mode) {
+ switch (mode) {
case DRM_MODE_DPMS_ON:
temp |= ADPA_DAC_ENABLE;
break;
@@ -152,17 +152,13 @@
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
adpa |= ADPA_VSYNC_ACTIVE_HIGH;
- if (intel_crtc->pipe == 0) {
- if (HAS_PCH_CPT(dev))
- adpa |= PORT_TRANS_A_SEL_CPT;
- else
- adpa |= ADPA_PIPE_A_SELECT;
- } else {
- if (HAS_PCH_CPT(dev))
- adpa |= PORT_TRANS_B_SEL_CPT;
- else
- adpa |= ADPA_PIPE_B_SELECT;
- }
+ /* For CPT allow 3 pipe config, for others just use A or B */
+ if (HAS_PCH_CPT(dev))
+ adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
+ else if (intel_crtc->pipe == 0)
+ adpa |= ADPA_PIPE_A_SELECT;
+ else
+ adpa |= ADPA_PIPE_B_SELECT;
if (!HAS_PCH_SPLIT(dev))
I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 04411ad..981b1f1 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -31,6 +31,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/vgaarb.h>
+#include <drm/drm_edid.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drm.h"
@@ -42,39 +43,39 @@
#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
-bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
static void intel_update_watermarks(struct drm_device *dev);
static void intel_increase_pllclock(struct drm_crtc *crtc);
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
typedef struct {
- /* given values */
- int n;
- int m1, m2;
- int p1, p2;
- /* derived values */
- int dot;
- int vco;
- int m;
- int p;
+ /* given values */
+ int n;
+ int m1, m2;
+ int p1, p2;
+ /* derived values */
+ int dot;
+ int vco;
+ int m;
+ int p;
} intel_clock_t;
typedef struct {
- int min, max;
+ int min, max;
} intel_range_t;
typedef struct {
- int dot_limit;
- int p2_slow, p2_fast;
+ int dot_limit;
+ int p2_slow, p2_fast;
} intel_p2_t;
#define INTEL_P2_NUM 2
typedef struct intel_limit intel_limit_t;
struct intel_limit {
- intel_range_t dot, vco, n, m, m1, m2, p, p1;
- intel_p2_t p2;
- bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
- int, int, intel_clock_t *);
+ intel_range_t dot, vco, n, m, m1, m2, p, p1;
+ intel_p2_t p2;
+ bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
+ int, int, intel_clock_t *);
};
/* FDI */
@@ -105,56 +106,56 @@
}
static const intel_limit_t intel_limits_i8xx_dvo = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 930000, .max = 1400000 },
- .n = { .min = 3, .max = 16 },
- .m = { .min = 96, .max = 140 },
- .m1 = { .min = 18, .max = 26 },
- .m2 = { .min = 6, .max = 16 },
- .p = { .min = 4, .max = 128 },
- .p1 = { .min = 2, .max = 33 },
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 930000, .max = 1400000 },
+ .n = { .min = 3, .max = 16 },
+ .m = { .min = 96, .max = 140 },
+ .m1 = { .min = 18, .max = 26 },
+ .m2 = { .min = 6, .max = 16 },
+ .p = { .min = 4, .max = 128 },
+ .p1 = { .min = 2, .max = 33 },
.p2 = { .dot_limit = 165000,
.p2_slow = 4, .p2_fast = 2 },
.find_pll = intel_find_best_PLL,
};
static const intel_limit_t intel_limits_i8xx_lvds = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 930000, .max = 1400000 },
- .n = { .min = 3, .max = 16 },
- .m = { .min = 96, .max = 140 },
- .m1 = { .min = 18, .max = 26 },
- .m2 = { .min = 6, .max = 16 },
- .p = { .min = 4, .max = 128 },
- .p1 = { .min = 1, .max = 6 },
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 930000, .max = 1400000 },
+ .n = { .min = 3, .max = 16 },
+ .m = { .min = 96, .max = 140 },
+ .m1 = { .min = 18, .max = 26 },
+ .m2 = { .min = 6, .max = 16 },
+ .p = { .min = 4, .max = 128 },
+ .p1 = { .min = 1, .max = 6 },
.p2 = { .dot_limit = 165000,
.p2_slow = 14, .p2_fast = 7 },
.find_pll = intel_find_best_PLL,
};
static const intel_limit_t intel_limits_i9xx_sdvo = {
- .dot = { .min = 20000, .max = 400000 },
- .vco = { .min = 1400000, .max = 2800000 },
- .n = { .min = 1, .max = 6 },
- .m = { .min = 70, .max = 120 },
- .m1 = { .min = 10, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 5, .max = 80 },
- .p1 = { .min = 1, .max = 8 },
+ .dot = { .min = 20000, .max = 400000 },
+ .vco = { .min = 1400000, .max = 2800000 },
+ .n = { .min = 1, .max = 6 },
+ .m = { .min = 70, .max = 120 },
+ .m1 = { .min = 10, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 5, .max = 80 },
+ .p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
.find_pll = intel_find_best_PLL,
};
static const intel_limit_t intel_limits_i9xx_lvds = {
- .dot = { .min = 20000, .max = 400000 },
- .vco = { .min = 1400000, .max = 2800000 },
- .n = { .min = 1, .max = 6 },
- .m = { .min = 70, .max = 120 },
- .m1 = { .min = 10, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 7, .max = 98 },
- .p1 = { .min = 1, .max = 8 },
+ .dot = { .min = 20000, .max = 400000 },
+ .vco = { .min = 1400000, .max = 2800000 },
+ .n = { .min = 1, .max = 6 },
+ .m = { .min = 70, .max = 120 },
+ .m1 = { .min = 10, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 7, .max = 98 },
+ .p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 7 },
.find_pll = intel_find_best_PLL,
@@ -222,44 +223,44 @@
};
static const intel_limit_t intel_limits_g4x_display_port = {
- .dot = { .min = 161670, .max = 227000 },
- .vco = { .min = 1750000, .max = 3500000},
- .n = { .min = 1, .max = 2 },
- .m = { .min = 97, .max = 108 },
- .m1 = { .min = 0x10, .max = 0x12 },
- .m2 = { .min = 0x05, .max = 0x06 },
- .p = { .min = 10, .max = 20 },
- .p1 = { .min = 1, .max = 2},
- .p2 = { .dot_limit = 0,
+ .dot = { .min = 161670, .max = 227000 },
+ .vco = { .min = 1750000, .max = 3500000},
+ .n = { .min = 1, .max = 2 },
+ .m = { .min = 97, .max = 108 },
+ .m1 = { .min = 0x10, .max = 0x12 },
+ .m2 = { .min = 0x05, .max = 0x06 },
+ .p = { .min = 10, .max = 20 },
+ .p1 = { .min = 1, .max = 2},
+ .p2 = { .dot_limit = 0,
.p2_slow = 10, .p2_fast = 10 },
- .find_pll = intel_find_pll_g4x_dp,
+ .find_pll = intel_find_pll_g4x_dp,
};
static const intel_limit_t intel_limits_pineview_sdvo = {
- .dot = { .min = 20000, .max = 400000},
- .vco = { .min = 1700000, .max = 3500000 },
+ .dot = { .min = 20000, .max = 400000},
+ .vco = { .min = 1700000, .max = 3500000 },
/* Pineview's Ncounter is a ring counter */
- .n = { .min = 3, .max = 6 },
- .m = { .min = 2, .max = 256 },
+ .n = { .min = 3, .max = 6 },
+ .m = { .min = 2, .max = 256 },
/* Pineview only has one combined m divider, which we treat as m2. */
- .m1 = { .min = 0, .max = 0 },
- .m2 = { .min = 0, .max = 254 },
- .p = { .min = 5, .max = 80 },
- .p1 = { .min = 1, .max = 8 },
+ .m1 = { .min = 0, .max = 0 },
+ .m2 = { .min = 0, .max = 254 },
+ .p = { .min = 5, .max = 80 },
+ .p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
.find_pll = intel_find_best_PLL,
};
static const intel_limit_t intel_limits_pineview_lvds = {
- .dot = { .min = 20000, .max = 400000 },
- .vco = { .min = 1700000, .max = 3500000 },
- .n = { .min = 3, .max = 6 },
- .m = { .min = 2, .max = 256 },
- .m1 = { .min = 0, .max = 0 },
- .m2 = { .min = 0, .max = 254 },
- .p = { .min = 7, .max = 112 },
- .p1 = { .min = 1, .max = 8 },
+ .dot = { .min = 20000, .max = 400000 },
+ .vco = { .min = 1700000, .max = 3500000 },
+ .n = { .min = 3, .max = 6 },
+ .m = { .min = 2, .max = 256 },
+ .m1 = { .min = 0, .max = 0 },
+ .m2 = { .min = 0, .max = 254 },
+ .p = { .min = 7, .max = 112 },
+ .p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 14 },
.find_pll = intel_find_best_PLL,
@@ -321,7 +322,7 @@
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 28, .max = 112 },
- .p1 = { .min = 2,.max = 8 },
+ .p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 14, .p2_fast = 14 },
.find_pll = intel_g4x_find_best_PLL,
@@ -335,24 +336,24 @@
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 14, .max = 42 },
- .p1 = { .min = 2,.max = 6 },
+ .p1 = { .min = 2, .max = 6 },
.p2 = { .dot_limit = 225000,
.p2_slow = 7, .p2_fast = 7 },
.find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_ironlake_display_port = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000},
- .n = { .min = 1, .max = 2 },
- .m = { .min = 81, .max = 90 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 10, .max = 20 },
- .p1 = { .min = 1, .max = 2},
- .p2 = { .dot_limit = 0,
+ .dot = { .min = 25000, .max = 350000 },
+ .vco = { .min = 1760000, .max = 3510000},
+ .n = { .min = 1, .max = 2 },
+ .m = { .min = 81, .max = 90 },
+ .m1 = { .min = 12, .max = 22 },
+ .m2 = { .min = 5, .max = 9 },
+ .p = { .min = 10, .max = 20 },
+ .p1 = { .min = 1, .max = 2},
+ .p2 = { .dot_limit = 0,
.p2_slow = 10, .p2_fast = 10 },
- .find_pll = intel_find_pll_ironlake_dp,
+ .find_pll = intel_find_pll_ironlake_dp,
};
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
@@ -404,7 +405,7 @@
limit = &intel_limits_g4x_hdmi;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
- } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
limit = &intel_limits_g4x_display_port;
} else /* The option is for other outputs */
limit = &intel_limits_i9xx_sdvo;
@@ -488,26 +489,26 @@
const intel_clock_t *clock)
{
if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
- INTELPllInvalid ("p1 out of range\n");
+ INTELPllInvalid("p1 out of range\n");
if (clock->p < limit->p.min || limit->p.max < clock->p)
- INTELPllInvalid ("p out of range\n");
+ INTELPllInvalid("p out of range\n");
if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
- INTELPllInvalid ("m2 out of range\n");
+ INTELPllInvalid("m2 out of range\n");
if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
- INTELPllInvalid ("m1 out of range\n");
+ INTELPllInvalid("m1 out of range\n");
if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
- INTELPllInvalid ("m1 <= m2\n");
+ INTELPllInvalid("m1 <= m2\n");
if (clock->m < limit->m.min || limit->m.max < clock->m)
- INTELPllInvalid ("m out of range\n");
+ INTELPllInvalid("m out of range\n");
if (clock->n < limit->n.min || limit->n.max < clock->n)
- INTELPllInvalid ("n out of range\n");
+ INTELPllInvalid("n out of range\n");
if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
- INTELPllInvalid ("vco out of range\n");
+ INTELPllInvalid("vco out of range\n");
/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
* connector, etc., rather than just a single range.
*/
if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
- INTELPllInvalid ("dot out of range\n");
+ INTELPllInvalid("dot out of range\n");
return true;
}
@@ -542,7 +543,7 @@
clock.p2 = limit->p2.p2_fast;
}
- memset (best_clock, 0, sizeof (*best_clock));
+ memset(best_clock, 0, sizeof(*best_clock));
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
@@ -802,6 +803,19 @@
u32 val;
bool cur_state;
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ u32 pch_dpll;
+
+ pch_dpll = I915_READ(PCH_DPLL_SEL);
+
+ /* Make sure the selected PLL is enabled to the transcoder */
+ WARN(!((pch_dpll >> (4 * pipe)) & 8),
+ "transcoder %d PLL not enabled\n", pipe);
+
+ /* Convert the transcoder pipe number to a pll pipe number */
+ pipe = (pch_dpll >> (4 * pipe)) & 1;
+ }
+
reg = PCH_DPLL(pipe);
val = I915_READ(reg);
cur_state = !!(val & DPLL_VCO_ENABLE);
@@ -1171,6 +1185,9 @@
int reg;
u32 val;
+ if (pipe > 1)
+ return;
+
/* PCH only available on ILK+ */
BUG_ON(dev_priv->info->gen < 5);
@@ -1191,6 +1208,9 @@
int reg;
u32 val;
+ if (pipe > 1)
+ return;
+
/* PCH only available on ILK+ */
BUG_ON(dev_priv->info->gen < 5);
@@ -1256,7 +1276,7 @@
I915_WRITE(reg, val);
/* wait for PCH transcoder off, transcoder state */
if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
- DRM_ERROR("failed to disable transcoder\n");
+ DRM_ERROR("failed to disable transcoder %d\n", pipe);
}
/**
@@ -2085,6 +2105,7 @@
switch (plane) {
case 0:
case 1:
+ case 2:
break;
default:
DRM_ERROR("Can't update plane %d in SAREA\n", plane);
@@ -2184,6 +2205,10 @@
case 0:
case 1:
break;
+ case 2:
+ if (IS_IVYBRIDGE(dev))
+ break;
+ /* fall through otherwise */
default:
DRM_ERROR("no plane for crtc\n");
return -EINVAL;
@@ -2440,7 +2465,7 @@
}
-static const int snb_b_fdi_train_param [] = {
+static const int snb_b_fdi_train_param[] = {
FDI_LINK_TRAIN_400MV_0DB_SNB_B,
FDI_LINK_TRAIN_400MV_6DB_SNB_B,
FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
@@ -2496,7 +2521,7 @@
if (HAS_PCH_CPT(dev))
cpt_phase_pointer_enable(dev, pipe);
- for (i = 0; i < 4; i++ ) {
+ for (i = 0; i < 4; i++) {
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2545,7 +2570,7 @@
POSTING_READ(reg);
udelay(150);
- for (i = 0; i < 4; i++ ) {
+ for (i = 0; i < 4; i++) {
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2600,6 +2625,7 @@
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_TX_ENABLE);
reg = FDI_RX_CTL(pipe);
@@ -2607,6 +2633,7 @@
temp &= ~FDI_LINK_TRAIN_AUTO;
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_RX_ENABLE);
POSTING_READ(reg);
@@ -2615,7 +2642,7 @@
if (HAS_PCH_CPT(dev))
cpt_phase_pointer_enable(dev, pipe);
- for (i = 0; i < 4; i++ ) {
+ for (i = 0; i < 4; i++) {
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2657,7 +2684,7 @@
POSTING_READ(reg);
udelay(150);
- for (i = 0; i < 4; i++ ) {
+ for (i = 0; i < 4; i++) {
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2866,7 +2893,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- u32 reg, temp;
+ u32 reg, temp, transc_sel;
/* For PCH output, training FDI link */
dev_priv->display.fdi_link_train(crtc);
@@ -2874,12 +2901,21 @@
intel_enable_pch_pll(dev_priv, pipe);
if (HAS_PCH_CPT(dev)) {
+ transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
+ TRANSC_DPLLB_SEL;
+
/* Be sure PCH DPLL SEL is set */
temp = I915_READ(PCH_DPLL_SEL);
- if (pipe == 0 && (temp & TRANSA_DPLL_ENABLE) == 0)
+ if (pipe == 0) {
+ temp &= ~(TRANSA_DPLLB_SEL);
temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
- else if (pipe == 1 && (temp & TRANSB_DPLL_ENABLE) == 0)
+ } else if (pipe == 1) {
+ temp &= ~(TRANSB_DPLLB_SEL);
temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+ } else if (pipe == 2) {
+ temp &= ~(TRANSC_DPLLB_SEL);
+ temp |= (TRANSC_DPLL_ENABLE | transc_sel);
+ }
I915_WRITE(PCH_DPLL_SEL, temp);
}
@@ -2935,6 +2971,24 @@
intel_enable_transcoder(dev_priv, pipe);
}
+void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
+ u32 temp;
+
+ temp = I915_READ(dslreg);
+ udelay(500);
+ if (wait_for(I915_READ(dslreg) != temp, 5)) {
+ /* Without this, mode sets may fail silently on FDI */
+ I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
+ udelay(250);
+ I915_WRITE(tc2reg, 0);
+ if (wait_for(I915_READ(dslreg) != temp, 5))
+ DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
+ }
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -3045,13 +3099,13 @@
temp = I915_READ(PCH_DPLL_SEL);
switch (pipe) {
case 0:
- temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
+ temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
break;
case 1:
temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
break;
case 2:
- /* FIXME: manage transcoder PLLs? */
+ /* C shares PLL A or B */
temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
break;
default:
@@ -3061,7 +3115,8 @@
}
/* disable PCH DPLL */
- intel_disable_pch_pll(dev_priv, pipe);
+ if (!intel_crtc->no_pll)
+ intel_disable_pch_pll(dev_priv, pipe);
/* Switch from PCDclk to Rawclk */
reg = FDI_RX_CTL(pipe);
@@ -3293,18 +3348,25 @@
ironlake_crtc_enable(crtc);
}
-void intel_encoder_prepare (struct drm_encoder *encoder)
+void intel_encoder_prepare(struct drm_encoder *encoder)
{
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
/* lvds has its own version of prepare see intel_lvds_prepare */
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
}
-void intel_encoder_commit (struct drm_encoder *encoder)
+void intel_encoder_commit(struct drm_encoder *encoder)
{
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+ struct drm_device *dev = encoder->dev;
+ struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
+
/* lvds has its own version of commit see intel_lvds_commit */
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+
+ if (HAS_PCH_CPT(dev))
+ intel_cpt_verify_modeset(dev, intel_crtc->pipe);
}
void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -4478,6 +4540,20 @@
enabled |= 2;
}
+ /* IVB has 3 pipes */
+ if (IS_IVYBRIDGE(dev) &&
+ g4x_compute_wm0(dev, 2,
+ &sandybridge_display_wm_info, latency,
+ &sandybridge_cursor_wm_info, latency,
+ &plane_wm, &cursor_wm)) {
+ I915_WRITE(WM0_PIPEC_IVB,
+ (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+ DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
+ " plane %d, cursor: %d\n",
+ plane_wm, cursor_wm);
+ enabled |= 3;
+ }
+
/*
* Calculate and update the self-refresh watermark only when one
* display plane is used.
@@ -4584,7 +4660,9 @@
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
- return dev_priv->lvds_use_ssc && i915_panel_use_ssc
+ if (i915_panel_use_ssc >= 0)
+ return i915_panel_use_ssc != 0;
+ return dev_priv->lvds_use_ssc
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
@@ -5107,36 +5185,52 @@
return ret;
}
-static void ironlake_update_pch_refclk(struct drm_device *dev)
+/*
+ * Initialize reference clocks when the driver loads
+ */
+void ironlake_init_pch_refclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_crtc *crtc;
struct intel_encoder *encoder;
- struct intel_encoder *has_edp_encoder = NULL;
u32 temp;
bool has_lvds = false;
+ bool has_cpu_edp = false;
+ bool has_pch_edp = false;
+ bool has_panel = false;
+ bool has_ck505 = false;
+ bool can_ssc = false;
/* We need to take the global config into account */
- list_for_each_entry(crtc, &mode_config->crtc_list, head) {
- if (!crtc->enabled)
- continue;
-
- list_for_each_entry(encoder, &mode_config->encoder_list,
- base.head) {
- if (encoder->base.crtc != crtc)
- continue;
-
- switch (encoder->type) {
- case INTEL_OUTPUT_LVDS:
- has_lvds = true;
- case INTEL_OUTPUT_EDP:
- has_edp_encoder = encoder;
- break;
- }
+ list_for_each_entry(encoder, &mode_config->encoder_list,
+ base.head) {
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ has_panel = true;
+ has_lvds = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ has_panel = true;
+ if (intel_encoder_is_pch_edp(&encoder->base))
+ has_pch_edp = true;
+ else
+ has_cpu_edp = true;
+ break;
}
}
+ if (HAS_PCH_IBX(dev)) {
+ has_ck505 = dev_priv->display_clock_mode;
+ can_ssc = has_ck505;
+ } else {
+ has_ck505 = false;
+ can_ssc = true;
+ }
+
+ DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
+ has_panel, has_lvds, has_pch_edp, has_cpu_edp,
+ has_ck505);
+
/* Ironlake: try to setup display ref clock before DPLL
* enabling. This is only under driver's control after
* PCH B stepping, previous chipset stepping should be
@@ -5145,43 +5239,102 @@
temp = I915_READ(PCH_DREF_CONTROL);
/* Always enable nonspread source */
temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_SOURCE_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
+ if (has_ck505)
+ temp |= DREF_NONSPREAD_CK505_ENABLE;
+ else
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
- if (has_edp_encoder) {
- if (intel_panel_use_ssc(dev_priv)) {
+ if (has_panel) {
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
+
+ /* SSC must be turned on before enabling the CPU output */
+ if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+ DRM_DEBUG_KMS("Using SSC on panel\n");
temp |= DREF_SSC1_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
-
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
}
+
+ /* Get SSC going before enabling the outputs */
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+
temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
/* Enable CPU source on CPU attached eDP */
- if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- if (intel_panel_use_ssc(dev_priv))
+ if (has_cpu_edp) {
+ if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+ DRM_DEBUG_KMS("Using SSC on eDP\n");
temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ }
else
temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
- } else {
- /* Enable SSC on PCH eDP if needed */
- if (intel_panel_use_ssc(dev_priv)) {
- DRM_ERROR("enabling SSC on PCH\n");
- temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
- }
- }
+ } else
+ temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+ } else {
+ DRM_DEBUG_KMS("Disabling SSC entirely\n");
+
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+ /* Turn off CPU output */
+ temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+
+ /* Turn off the SSC source */
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_DISABLE;
+
+ /* Turn off SSC1 */
+ temp &= ~ DREF_SSC1_ENABLE;
+
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
}
}
+static int ironlake_get_refclk(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *encoder;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *edp_encoder = NULL;
+ int num_connectors = 0;
+ bool is_lvds = false;
+
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ edp_encoder = encoder;
+ break;
+ }
+ num_connectors++;
+ }
+
+ if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+ DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+ dev_priv->lvds_ssc_freq);
+ return dev_priv->lvds_ssc_freq * 1000;
+ }
+
+ return 120000;
+}
+
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -5241,16 +5394,7 @@
num_connectors++;
}
- if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
- refclk = dev_priv->lvds_ssc_freq * 1000;
- DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
- refclk / 1000);
- } else {
- refclk = 96000;
- if (!has_edp_encoder ||
- intel_encoder_is_pch_edp(&has_edp_encoder->base))
- refclk = 120000; /* 120Mhz refclk */
- }
+ refclk = ironlake_get_refclk(crtc);
/*
* Returns a set of divisors for the desired target clock with the given
@@ -5377,8 +5521,6 @@
ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
&m_n);
- ironlake_update_pch_refclk(dev);
-
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)
fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
@@ -5450,39 +5592,32 @@
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
- DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
drm_mode_debug_printmodeline(mode);
/* PCH eDP needs FDI, but CPU eDP does not */
- if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- I915_WRITE(PCH_FP0(pipe), fp);
- I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+ if (!intel_crtc->no_pll) {
+ if (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ I915_WRITE(PCH_FP0(pipe), fp);
+ I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
- POSTING_READ(PCH_DPLL(pipe));
- udelay(150);
- }
-
- /* enable transcoder DPLL */
- if (HAS_PCH_CPT(dev)) {
- temp = I915_READ(PCH_DPLL_SEL);
- switch (pipe) {
- case 0:
- temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL;
- break;
- case 1:
- temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL;
- break;
- case 2:
- /* FIXME: manage transcoder PLLs? */
- temp |= TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL;
- break;
- default:
- BUG();
+ POSTING_READ(PCH_DPLL(pipe));
+ udelay(150);
}
- I915_WRITE(PCH_DPLL_SEL, temp);
-
- POSTING_READ(PCH_DPLL_SEL);
- udelay(150);
+ } else {
+ if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
+ fp == I915_READ(PCH_FP0(0))) {
+ intel_crtc->use_pll_a = true;
+ DRM_DEBUG_KMS("using pipe a dpll\n");
+ } else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
+ fp == I915_READ(PCH_FP0(1))) {
+ intel_crtc->use_pll_a = false;
+ DRM_DEBUG_KMS("using pipe b dpll\n");
+ } else {
+ DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
+ return -EINVAL;
+ }
}
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
@@ -5492,17 +5627,13 @@
if (is_lvds) {
temp = I915_READ(PCH_LVDS);
temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (pipe == 1) {
- if (HAS_PCH_CPT(dev))
- temp |= PORT_TRANS_B_SEL_CPT;
- else
- temp |= LVDS_PIPEB_SELECT;
- } else {
- if (HAS_PCH_CPT(dev))
- temp &= ~PORT_TRANS_SEL_MASK;
- else
- temp &= ~LVDS_PIPEB_SELECT;
- }
+ if (HAS_PCH_CPT(dev))
+ temp |= PORT_TRANS_SEL_CPT(pipe);
+ else if (pipe == 1)
+ temp |= LVDS_PIPEB_SELECT;
+ else
+ temp &= ~LVDS_PIPEB_SELECT;
+
/* set the corresponsding LVDS_BORDER bit */
temp |= dev_priv->lvds_border_bits;
/* Set the B0-B3 data pairs corresponding to whether we're going to
@@ -5552,8 +5683,9 @@
I915_WRITE(TRANSDPLINK_N1(pipe), 0);
}
- if (!has_edp_encoder ||
- intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (!intel_crtc->no_pll &&
+ (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
I915_WRITE(PCH_DPLL(pipe), dpll);
/* Wait for the clocks to stabilize. */
@@ -5569,18 +5701,20 @@
}
intel_crtc->lowfreq_avail = false;
- if (is_lvds && has_reduced_clock && i915_powersave) {
- I915_WRITE(PCH_FP1(pipe), fp2);
- intel_crtc->lowfreq_avail = true;
- if (HAS_PIPE_CXSR(dev)) {
- DRM_DEBUG_KMS("enabling CxSR downclocking\n");
- pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
- }
- } else {
- I915_WRITE(PCH_FP1(pipe), fp);
- if (HAS_PIPE_CXSR(dev)) {
- DRM_DEBUG_KMS("disabling CxSR downclocking\n");
- pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ if (!intel_crtc->no_pll) {
+ if (is_lvds && has_reduced_clock && i915_powersave) {
+ I915_WRITE(PCH_FP1(pipe), fp2);
+ intel_crtc->lowfreq_avail = true;
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+ pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+ }
+ } else {
+ I915_WRITE(PCH_FP1(pipe), fp);
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+ pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ }
}
}
@@ -5677,6 +5811,131 @@
return ret;
}
+static void g4x_write_eld(struct drm_connector *connector,
+ struct drm_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ uint8_t *eld = connector->eld;
+ uint32_t eldv;
+ uint32_t len;
+ uint32_t i;
+
+ i = I915_READ(G4X_AUD_VID_DID);
+
+ if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
+ eldv = G4X_ELDV_DEVCL_DEVBLC;
+ else
+ eldv = G4X_ELDV_DEVCTG;
+
+ i = I915_READ(G4X_AUD_CNTL_ST);
+ i &= ~(eldv | G4X_ELD_ADDR);
+ len = (i >> 9) & 0x1f; /* ELD buffer size */
+ I915_WRITE(G4X_AUD_CNTL_ST, i);
+
+ if (!eld[0])
+ return;
+
+ len = min_t(uint8_t, eld[2], len);
+ DRM_DEBUG_DRIVER("ELD size %d\n", len);
+ for (i = 0; i < len; i++)
+ I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
+
+ i = I915_READ(G4X_AUD_CNTL_ST);
+ i |= eldv;
+ I915_WRITE(G4X_AUD_CNTL_ST, i);
+}
+
+static void ironlake_write_eld(struct drm_connector *connector,
+ struct drm_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ uint8_t *eld = connector->eld;
+ uint32_t eldv;
+ uint32_t i;
+ int len;
+ int hdmiw_hdmiedid;
+ int aud_cntl_st;
+ int aud_cntrl_st2;
+
+ if (IS_IVYBRIDGE(connector->dev)) {
+ hdmiw_hdmiedid = GEN7_HDMIW_HDMIEDID_A;
+ aud_cntl_st = GEN7_AUD_CNTRL_ST_A;
+ aud_cntrl_st2 = GEN7_AUD_CNTRL_ST2;
+ } else {
+ hdmiw_hdmiedid = GEN5_HDMIW_HDMIEDID_A;
+ aud_cntl_st = GEN5_AUD_CNTL_ST_A;
+ aud_cntrl_st2 = GEN5_AUD_CNTL_ST2;
+ }
+
+ i = to_intel_crtc(crtc)->pipe;
+ hdmiw_hdmiedid += i * 0x100;
+ aud_cntl_st += i * 0x100;
+
+ DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
+
+ i = I915_READ(aud_cntl_st);
+ i = (i >> 29) & 0x3; /* DIP_Port_Select, 0x1 = PortB */
+ if (!i) {
+ DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
+ /* operate blindly on all ports */
+ eldv = GEN5_ELD_VALIDB;
+ eldv |= GEN5_ELD_VALIDB << 4;
+ eldv |= GEN5_ELD_VALIDB << 8;
+ } else {
+ DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
+ eldv = GEN5_ELD_VALIDB << ((i - 1) * 4);
+ }
+
+ i = I915_READ(aud_cntrl_st2);
+ i &= ~eldv;
+ I915_WRITE(aud_cntrl_st2, i);
+
+ if (!eld[0])
+ return;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
+ eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
+ }
+
+ i = I915_READ(aud_cntl_st);
+ i &= ~GEN5_ELD_ADDRESS;
+ I915_WRITE(aud_cntl_st, i);
+
+ len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
+ DRM_DEBUG_DRIVER("ELD size %d\n", len);
+ for (i = 0; i < len; i++)
+ I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
+
+ i = I915_READ(aud_cntrl_st2);
+ i |= eldv;
+ I915_WRITE(aud_cntrl_st2, i);
+}
+
+void intel_write_eld(struct drm_encoder *encoder,
+ struct drm_display_mode *mode)
+{
+ struct drm_crtc *crtc = encoder->crtc;
+ struct drm_connector *connector;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ connector = drm_select_eld(encoder, mode);
+ if (!connector)
+ return;
+
+ DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+ connector->base.id,
+ drm_get_connector_name(connector),
+ connector->encoder->base.id,
+ drm_get_encoder_name(connector->encoder));
+
+ connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
+
+ if (dev_priv->display.write_eld)
+ dev_priv->display.write_eld(connector, crtc);
+}
+
/** Loads the palette/gamma unit for the CRTC with the prepared values */
void intel_crtc_load_lut(struct drm_crtc *crtc)
{
@@ -5758,6 +6017,31 @@
I915_WRITE(CURBASE(pipe), base);
}
+static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ bool visible = base != 0;
+
+ if (intel_crtc->cursor_visible != visible) {
+ uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+ if (base) {
+ cntl &= ~CURSOR_MODE;
+ cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ } else {
+ cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+ cntl |= CURSOR_MODE_DISABLE;
+ }
+ I915_WRITE(CURCNTR_IVB(pipe), cntl);
+
+ intel_crtc->cursor_visible = visible;
+ }
+ /* and commit changes on next vblank */
+ I915_WRITE(CURBASE_IVB(pipe), base);
+}
+
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
static void intel_crtc_update_cursor(struct drm_crtc *crtc,
bool on)
@@ -5805,11 +6089,16 @@
if (!visible && !intel_crtc->cursor_visible)
return;
- I915_WRITE(CURPOS(pipe), pos);
- if (IS_845G(dev) || IS_I865G(dev))
- i845_update_cursor(crtc, base);
- else
- i9xx_update_cursor(crtc, base);
+ if (IS_IVYBRIDGE(dev)) {
+ I915_WRITE(CURPOS_IVB(pipe), pos);
+ ivb_update_cursor(crtc, base);
+ } else {
+ I915_WRITE(CURPOS(pipe), pos);
+ if (IS_845G(dev) || IS_I865G(dev))
+ i845_update_cursor(crtc, base);
+ else
+ i9xx_update_cursor(crtc, base);
+ }
if (visible)
intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
@@ -7071,6 +7360,8 @@
intel_crtc->bpp = 24; /* default for pre-Ironlake */
if (HAS_PCH_SPLIT(dev)) {
+ if (pipe == 2 && IS_IVYBRIDGE(dev))
+ intel_crtc->no_pll = true;
intel_helper_funcs.prepare = ironlake_crtc_prepare;
intel_helper_funcs.commit = ironlake_crtc_commit;
} else {
@@ -7250,6 +7541,9 @@
/* disable all the possible outputs/crtcs before entering KMS mode */
drm_helper_disable_unused_functions(dev);
+
+ if (HAS_PCH_SPLIT(dev))
+ ironlake_init_pch_refclk(dev);
}
static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
@@ -7494,6 +7788,10 @@
I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
I915_WRITE(GEN6_PMIER, 0);
+ /* Complete PM interrupt masking here doesn't race with the rps work
+ * item again unmasking PM interrupts because that is using a different
+ * register (PMIMR) to mask PM interrupts. The only risk is in leaving
+ * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
spin_lock_irq(&dev_priv->rps_lock);
dev_priv->pm_iir = 0;
@@ -8154,7 +8452,7 @@
}
/* Returns the core display clock speed */
- if (IS_I945G(dev) || (IS_G33(dev) && ! IS_PINEVIEW_M(dev)))
+ if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
else if (IS_I915G(dev))
@@ -8193,6 +8491,7 @@
}
dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
+ dev_priv->display.write_eld = ironlake_write_eld;
} else if (IS_GEN6(dev)) {
if (SNB_READ_WM0_LATENCY()) {
dev_priv->display.update_wm = sandybridge_update_wm;
@@ -8203,6 +8502,7 @@
}
dev_priv->display.fdi_link_train = gen6_fdi_link_train;
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
+ dev_priv->display.write_eld = ironlake_write_eld;
} else if (IS_IVYBRIDGE(dev)) {
/* FIXME: detect B0+ stepping and use auto training */
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
@@ -8214,7 +8514,7 @@
dev_priv->display.update_wm = NULL;
}
dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
-
+ dev_priv->display.write_eld = ironlake_write_eld;
} else
dev_priv->display.update_wm = NULL;
} else if (IS_PINEVIEW(dev)) {
@@ -8225,7 +8525,7 @@
DRM_INFO("failed to find known CxSR latency "
"(found ddr%s fsb freq %d, mem freq %d), "
"disabling CxSR\n",
- (dev_priv->is_ddr3 == 1) ? "3": "2",
+ (dev_priv->is_ddr3 == 1) ? "3" : "2",
dev_priv->fsb_freq, dev_priv->mem_freq);
/* Disable CxSR and never update its watermark again */
pineview_disable_cxsr(dev);
@@ -8234,6 +8534,7 @@
dev_priv->display.update_wm = pineview_update_wm;
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
} else if (IS_G4X(dev)) {
+ dev_priv->display.write_eld = g4x_write_eld;
dev_priv->display.update_wm = g4x_update_wm;
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
} else if (IS_GEN4(dev)) {
@@ -8294,7 +8595,7 @@
* resume, or other times. This quirk makes sure that's the case for
* affected systems.
*/
-static void quirk_pipea_force (struct drm_device *dev)
+static void quirk_pipea_force(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -8322,7 +8623,7 @@
/* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
{ 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
/* HP Mini needs pipe A force quirk (LP: #322104) */
- { 0x27ae,0x103c, 0x361a, quirk_pipea_force },
+ { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
/* Thinkpad R31 needs pipe A force quirk */
{ 0x3577, 0x1014, 0x0505, quirk_pipea_force },
@@ -8488,6 +8789,7 @@
* enqueue unpin/hotplug work. */
drm_irq_uninstall(dev);
cancel_work_sync(&dev_priv->hotplug_work);
+ cancel_work_sync(&dev_priv->rps_work);
/* flush any delayed tasks or pending work */
flush_scheduled_work();
@@ -8573,7 +8875,7 @@
struct intel_display_error_state *
intel_display_capture_error_state(struct drm_device *dev)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_display_error_state *error;
int i;
@@ -8589,7 +8891,7 @@
error->plane[i].control = I915_READ(DSPCNTR(i));
error->plane[i].stride = I915_READ(DSPSTRIDE(i));
error->plane[i].size = I915_READ(DSPSIZE(i));
- error->plane[i].pos= I915_READ(DSPPOS(i));
+ error->plane[i].pos = I915_READ(DSPPOS(i));
error->plane[i].addr = I915_READ(DSPADDR(i));
if (INTEL_INFO(dev)->gen >= 4) {
error->plane[i].surface = I915_READ(DSPSURF(i));
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 44fef5e..fc1a0832 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -36,7 +36,7 @@
#include "i915_drv.h"
#include "drm_dp_helper.h"
-
+#define DP_RECEIVER_CAP_SIZE 0xf
#define DP_LINK_STATUS_SIZE 6
#define DP_LINK_CHECK_TIMEOUT (10 * 1000)
@@ -53,12 +53,21 @@
int dpms_mode;
uint8_t link_bw;
uint8_t lane_count;
- uint8_t dpcd[8];
+ uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
struct i2c_adapter adapter;
struct i2c_algo_dp_aux_data algo;
bool is_pch_edp;
uint8_t train_set[4];
uint8_t link_status[DP_LINK_STATUS_SIZE];
+ int panel_power_up_delay;
+ int panel_power_down_delay;
+ int panel_power_cycle_delay;
+ int backlight_on_delay;
+ int backlight_off_delay;
+ struct drm_display_mode *panel_fixed_mode; /* for eDP */
+ struct delayed_work panel_vdd_work;
+ bool want_panel_vdd;
+ unsigned long panel_off_jiffies;
};
/**
@@ -86,6 +95,17 @@
return intel_dp->is_pch_edp;
}
+/**
+ * is_cpu_edp - is the port on the CPU and attached to an eDP panel?
+ * @intel_dp: DP struct
+ *
+ * Returns true if the given DP struct corresponds to a CPU eDP port.
+ */
+static bool is_cpu_edp(struct intel_dp *intel_dp)
+{
+ return is_edp(intel_dp) && !is_pch_edp(intel_dp);
+}
+
static struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
{
return container_of(encoder, struct intel_dp, base.base);
@@ -121,7 +141,7 @@
static void intel_dp_link_down(struct intel_dp *intel_dp);
void
-intel_edp_link_config (struct intel_encoder *intel_encoder,
+intel_edp_link_config(struct intel_encoder *intel_encoder,
int *lane_num, int *link_bw)
{
struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
@@ -175,9 +195,25 @@
return 162000;
}
-/* I think this is a fiction */
+/*
+ * The units on the numbers in the next two are... bizarre. Examples will
+ * make it clearer; this one parallels an example in the eDP spec.
+ *
+ * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as:
+ *
+ * 270000 * 1 * 8 / 10 == 216000
+ *
+ * The actual data capacity of that configuration is 2.16Gbit/s, so the
+ * units are decakilobits. ->clock in a drm_display_mode is in kilohertz -
+ * or equivalently, kilopixels per second - so for 1680x1050R it'd be
+ * 119000. At 18bpp that's 2142000 kilobits per second.
+ *
+ * Thus the strange-looking division by 10 in intel_dp_link_required, to
+ * get the result in decakilobits instead of kilobits.
+ */
+
static int
-intel_dp_link_required(struct drm_device *dev, struct intel_dp *intel_dp, int pixel_clock)
+intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock)
{
struct drm_crtc *crtc = intel_dp->base.base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -186,7 +222,7 @@
if (intel_crtc)
bpp = intel_crtc->bpp;
- return (pixel_clock * bpp + 7) / 8;
+ return (pixel_clock * bpp + 9) / 10;
}
static int
@@ -200,24 +236,19 @@
struct drm_display_mode *mode)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- struct drm_device *dev = connector->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
int max_lanes = intel_dp_max_lane_count(intel_dp);
- if (is_edp(intel_dp) && dev_priv->panel_fixed_mode) {
- if (mode->hdisplay > dev_priv->panel_fixed_mode->hdisplay)
+ if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
+ if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
return MODE_PANEL;
- if (mode->vdisplay > dev_priv->panel_fixed_mode->vdisplay)
+ if (mode->vdisplay > intel_dp->panel_fixed_mode->vdisplay)
return MODE_PANEL;
}
- /* only refuse the mode on non eDP since we have seen some weird eDP panels
- which are outside spec tolerances but somehow work by magic */
- if (!is_edp(intel_dp) &&
- (intel_dp_link_required(connector->dev, intel_dp, mode->clock)
- > intel_dp_max_data_rate(max_link_clock, max_lanes)))
+ if (intel_dp_link_required(intel_dp, mode->clock)
+ > intel_dp_max_data_rate(max_link_clock, max_lanes))
return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
@@ -279,6 +310,38 @@
}
}
+static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ return (I915_READ(PCH_PP_STATUS) & PP_ON) != 0;
+}
+
+static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ return (I915_READ(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0;
+}
+
+static void
+intel_dp_check_edp(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (!is_edp(intel_dp))
+ return;
+ if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) {
+ WARN(1, "eDP powered off while attempting aux channel communication.\n");
+ DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
+ I915_READ(PCH_PP_STATUS),
+ I915_READ(PCH_PP_CONTROL));
+ }
+}
+
static int
intel_dp_aux_ch(struct intel_dp *intel_dp,
uint8_t *send, int send_bytes,
@@ -295,6 +358,7 @@
uint32_t aux_clock_divider;
int try, precharge;
+ intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
* and would like to run at 2MHz. So, take the
* hrawclk value and divide by 2 and use that
@@ -302,7 +366,7 @@
* Note that PCH attached eDP panels should use a 125MHz input
* clock divider.
*/
- if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) {
+ if (is_cpu_edp(intel_dp)) {
if (IS_GEN6(dev))
aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */
else
@@ -337,7 +401,7 @@
for (i = 0; i < send_bytes; i += 4)
I915_WRITE(ch_data + i,
pack_aux(send + i, send_bytes - i));
-
+
/* Send the command and wait for it to complete */
I915_WRITE(ch_ctl,
DP_AUX_CH_CTL_SEND_BUSY |
@@ -354,7 +418,7 @@
break;
udelay(100);
}
-
+
/* Clear done status and any errors */
I915_WRITE(ch_ctl,
status |
@@ -390,7 +454,7 @@
DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
if (recv_bytes > recv_size)
recv_bytes = recv_size;
-
+
for (i = 0; i < recv_bytes; i += 4)
unpack_aux(I915_READ(ch_data + i),
recv + i, recv_bytes - i);
@@ -408,6 +472,7 @@
int msg_bytes;
uint8_t ack;
+ intel_dp_check_edp(intel_dp);
if (send_bytes > 16)
return -1;
msg[0] = AUX_NATIVE_WRITE << 4;
@@ -450,6 +515,7 @@
uint8_t ack;
int ret;
+ intel_dp_check_edp(intel_dp);
msg[0] = AUX_NATIVE_READ << 4;
msg[1] = address >> 8;
msg[2] = address & 0xff;
@@ -493,6 +559,7 @@
int reply_bytes;
int ret;
+ intel_dp_check_edp(intel_dp);
/* Set up the command byte */
if (mode & MODE_I2C_READ)
msg[0] = AUX_I2C_READ << 4;
@@ -573,24 +640,32 @@
return -EREMOTEIO;
}
+static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp);
+static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
+
static int
intel_dp_i2c_init(struct intel_dp *intel_dp,
struct intel_connector *intel_connector, const char *name)
{
+ int ret;
+
DRM_DEBUG_KMS("i2c_init %s\n", name);
intel_dp->algo.running = false;
intel_dp->algo.address = 0;
intel_dp->algo.aux_ch = intel_dp_i2c_aux_ch;
- memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter));
+ memset(&intel_dp->adapter, '\0', sizeof(intel_dp->adapter));
intel_dp->adapter.owner = THIS_MODULE;
intel_dp->adapter.class = I2C_CLASS_DDC;
- strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1);
+ strncpy(intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1);
intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0';
intel_dp->adapter.algo_data = &intel_dp->algo;
intel_dp->adapter.dev.parent = &intel_connector->base.kdev;
- return i2c_dp_aux_add_bus(&intel_dp->adapter);
+ ironlake_edp_panel_vdd_on(intel_dp);
+ ret = i2c_dp_aux_add_bus(&intel_dp->adapter);
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ return ret;
}
static bool
@@ -598,29 +673,28 @@
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
int lane_count, clock;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
- if (is_edp(intel_dp) && dev_priv->panel_fixed_mode) {
- intel_fixed_panel_mode(dev_priv->panel_fixed_mode, adjusted_mode);
+ if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
+ intel_fixed_panel_mode(intel_dp->panel_fixed_mode, adjusted_mode);
intel_pch_panel_fitting(dev, DRM_MODE_SCALE_FULLSCREEN,
mode, adjusted_mode);
/*
* the mode->clock is used to calculate the Data&Link M/N
* of the pipe. For the eDP the fixed clock should be used.
*/
- mode->clock = dev_priv->panel_fixed_mode->clock;
+ mode->clock = intel_dp->panel_fixed_mode->clock;
}
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
- if (intel_dp_link_required(encoder->dev, intel_dp, mode->clock)
+ if (intel_dp_link_required(intel_dp, mode->clock)
<= link_avail) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
@@ -634,19 +708,6 @@
}
}
- if (is_edp(intel_dp)) {
- /* okay we failed just pick the highest */
- intel_dp->lane_count = max_lane_count;
- intel_dp->link_bw = bws[max_clock];
- adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
- DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
- "count %d clock %d\n",
- intel_dp->link_bw, intel_dp->lane_count,
- adjusted_mode->clock);
-
- return true;
- }
-
return false;
}
@@ -740,6 +801,9 @@
}
}
+static void ironlake_edp_pll_on(struct drm_encoder *encoder);
+static void ironlake_edp_pll_off(struct drm_encoder *encoder);
+
static void
intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
@@ -749,6 +813,14 @@
struct drm_crtc *crtc = intel_dp->base.base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ /* Turn on the eDP PLL if needed */
+ if (is_edp(intel_dp)) {
+ if (!is_pch_edp(intel_dp))
+ ironlake_edp_pll_on(encoder);
+ else
+ ironlake_edp_pll_off(encoder);
+ }
+
intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
intel_dp->DP |= intel_dp->color_range;
@@ -757,7 +829,7 @@
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
intel_dp->DP |= DP_SYNC_VS_HIGH;
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
else
intel_dp->DP |= DP_LINK_TRAIN_OFF;
@@ -773,8 +845,12 @@
intel_dp->DP |= DP_PORT_WIDTH_4;
break;
}
- if (intel_dp->has_audio)
+ if (intel_dp->has_audio) {
+ DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
+ pipe_name(intel_crtc->pipe));
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
+ intel_write_eld(encoder, adjusted_mode);
+ }
memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
intel_dp->link_configuration[0] = intel_dp->link_bw;
@@ -794,7 +870,7 @@
if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
intel_dp->DP |= DP_PIPEB_SELECT;
- if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) {
+ if (is_cpu_edp(intel_dp)) {
/* don't miss out required setting for eDP */
intel_dp->DP |= DP_PLL_ENABLE;
if (adjusted_mode->clock < 200000)
@@ -804,58 +880,150 @@
}
}
+static void ironlake_wait_panel_off(struct intel_dp *intel_dp)
+{
+ unsigned long off_time;
+ unsigned long delay;
+
+ DRM_DEBUG_KMS("Wait for panel power off time\n");
+
+ if (ironlake_edp_have_panel_power(intel_dp) ||
+ ironlake_edp_have_panel_vdd(intel_dp))
+ {
+ DRM_DEBUG_KMS("Panel still on, no delay needed\n");
+ return;
+ }
+
+ off_time = intel_dp->panel_off_jiffies + msecs_to_jiffies(intel_dp->panel_power_down_delay);
+ if (time_after(jiffies, off_time)) {
+ DRM_DEBUG_KMS("Time already passed");
+ return;
+ }
+ delay = jiffies_to_msecs(off_time - jiffies);
+ if (delay > intel_dp->panel_power_down_delay)
+ delay = intel_dp->panel_power_down_delay;
+ DRM_DEBUG_KMS("Waiting an additional %ld ms\n", delay);
+ msleep(delay);
+}
+
static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
- /*
- * If the panel wasn't on, make sure there's not a currently
- * active PP sequence before enabling AUX VDD.
- */
- if (!(I915_READ(PCH_PP_STATUS) & PP_ON))
- msleep(dev_priv->panel_t3);
+ if (!is_edp(intel_dp))
+ return;
+ DRM_DEBUG_KMS("Turn eDP VDD on\n");
+ WARN(intel_dp->want_panel_vdd,
+ "eDP VDD already requested on\n");
+
+ intel_dp->want_panel_vdd = true;
+ if (ironlake_edp_have_panel_vdd(intel_dp)) {
+ DRM_DEBUG_KMS("eDP VDD already on\n");
+ return;
+ }
+
+ ironlake_wait_panel_off(intel_dp);
pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~PANEL_UNLOCK_MASK;
+ pp |= PANEL_UNLOCK_REGS;
pp |= EDP_FORCE_VDD;
I915_WRITE(PCH_PP_CONTROL, pp);
POSTING_READ(PCH_PP_CONTROL);
+ DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
+ I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
+
+ /*
+ * If the panel wasn't on, delay before accessing aux channel
+ */
+ if (!ironlake_edp_have_panel_power(intel_dp)) {
+ DRM_DEBUG_KMS("eDP was not running\n");
+ msleep(intel_dp->panel_power_up_delay);
+ }
}
-static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp)
+static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
- pp = I915_READ(PCH_PP_CONTROL);
- pp &= ~EDP_FORCE_VDD;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+ if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~PANEL_UNLOCK_MASK;
+ pp |= PANEL_UNLOCK_REGS;
+ pp &= ~EDP_FORCE_VDD;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
- /* Make sure sequencer is idle before allowing subsequent activity */
- msleep(dev_priv->panel_t12);
+ /* Make sure sequencer is idle before allowing subsequent activity */
+ DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
+ I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
+ intel_dp->panel_off_jiffies = jiffies;
+ }
+}
+
+static void ironlake_panel_vdd_work(struct work_struct *__work)
+{
+ struct intel_dp *intel_dp = container_of(to_delayed_work(__work),
+ struct intel_dp, panel_vdd_work);
+ struct drm_device *dev = intel_dp->base.base.dev;
+
+ mutex_lock(&dev->struct_mutex);
+ ironlake_panel_vdd_off_sync(intel_dp);
+ mutex_unlock(&dev->struct_mutex);
+}
+
+static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
+{
+ if (!is_edp(intel_dp))
+ return;
+
+ DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd);
+ WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on");
+
+ intel_dp->want_panel_vdd = false;
+
+ if (sync) {
+ ironlake_panel_vdd_off_sync(intel_dp);
+ } else {
+ /*
+ * Queue the timer to fire a long
+ * time from now (relative to the power down delay)
+ * to keep the panel power up across a sequence of operations
+ */
+ schedule_delayed_work(&intel_dp->panel_vdd_work,
+ msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5));
+ }
}
/* Returns true if the panel was already on when called */
-static bool ironlake_edp_panel_on (struct intel_dp *intel_dp)
+static void ironlake_edp_panel_on(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE;
- if (I915_READ(PCH_PP_STATUS) & PP_ON)
- return true;
+ if (!is_edp(intel_dp))
+ return;
+ if (ironlake_edp_have_panel_power(intel_dp))
+ return;
+ ironlake_wait_panel_off(intel_dp);
pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~PANEL_UNLOCK_MASK;
+ pp |= PANEL_UNLOCK_REGS;
- /* ILK workaround: disable reset around power sequence */
- pp &= ~PANEL_POWER_RESET;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+ if (IS_GEN5(dev)) {
+ /* ILK workaround: disable reset around power sequence */
+ pp &= ~PANEL_POWER_RESET;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
+ }
- pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
+ pp |= POWER_TARGET_ON;
I915_WRITE(PCH_PP_CONTROL, pp);
POSTING_READ(PCH_PP_CONTROL);
@@ -864,44 +1032,64 @@
DRM_ERROR("panel on wait timed out: 0x%08x\n",
I915_READ(PCH_PP_STATUS));
- pp |= PANEL_POWER_RESET; /* restore panel reset bit */
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
-
- return false;
+ if (IS_GEN5(dev)) {
+ pp |= PANEL_POWER_RESET; /* restore panel reset bit */
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
+ }
}
-static void ironlake_edp_panel_off (struct drm_device *dev)
+static void ironlake_edp_panel_off(struct drm_encoder *encoder)
{
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK |
PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK;
+ if (!is_edp(intel_dp))
+ return;
pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~PANEL_UNLOCK_MASK;
+ pp |= PANEL_UNLOCK_REGS;
- /* ILK workaround: disable reset around power sequence */
- pp &= ~PANEL_POWER_RESET;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+ if (IS_GEN5(dev)) {
+ /* ILK workaround: disable reset around power sequence */
+ pp &= ~PANEL_POWER_RESET;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
+ }
- pp &= ~POWER_TARGET_ON;
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+ intel_dp->panel_off_jiffies = jiffies;
- if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000))
- DRM_ERROR("panel off wait timed out: 0x%08x\n",
- I915_READ(PCH_PP_STATUS));
+ if (IS_GEN5(dev)) {
+ pp &= ~POWER_TARGET_ON;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
+ pp &= ~POWER_TARGET_ON;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
+ msleep(intel_dp->panel_power_cycle_delay);
- pp |= PANEL_POWER_RESET; /* restore panel reset bit */
- I915_WRITE(PCH_PP_CONTROL, pp);
- POSTING_READ(PCH_PP_CONTROL);
+ if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000))
+ DRM_ERROR("panel off wait timed out: 0x%08x\n",
+ I915_READ(PCH_PP_STATUS));
+
+ pp |= PANEL_POWER_RESET; /* restore panel reset bit */
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
+ }
}
-static void ironlake_edp_backlight_on (struct drm_device *dev)
+static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
{
+ struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ if (!is_edp(intel_dp))
+ return;
+
DRM_DEBUG_KMS("\n");
/*
* If we enable the backlight right away following a panel power
@@ -909,21 +1097,32 @@
* link. So delay a bit to make sure the image is solid before
* allowing it to appear.
*/
- msleep(300);
+ msleep(intel_dp->backlight_on_delay);
pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~PANEL_UNLOCK_MASK;
+ pp |= PANEL_UNLOCK_REGS;
pp |= EDP_BLC_ENABLE;
I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
}
-static void ironlake_edp_backlight_off (struct drm_device *dev)
+static void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
{
+ struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ if (!is_edp(intel_dp))
+ return;
+
DRM_DEBUG_KMS("\n");
pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~PANEL_UNLOCK_MASK;
+ pp |= PANEL_UNLOCK_REGS;
pp &= ~EDP_BLC_ENABLE;
I915_WRITE(PCH_PP_CONTROL, pp);
+ POSTING_READ(PCH_PP_CONTROL);
+ msleep(intel_dp->backlight_off_delay);
}
static void ironlake_edp_pll_on(struct drm_encoder *encoder)
@@ -986,43 +1185,39 @@
static void intel_dp_prepare(struct drm_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- struct drm_device *dev = encoder->dev;
/* Wake up the sink first */
+ ironlake_edp_panel_vdd_on(intel_dp);
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+ ironlake_edp_panel_vdd_off(intel_dp, false);
- if (is_edp(intel_dp)) {
- ironlake_edp_backlight_off(dev);
- ironlake_edp_panel_off(dev);
- if (!is_pch_edp(intel_dp))
- ironlake_edp_pll_on(encoder);
- else
- ironlake_edp_pll_off(encoder);
- }
+ /* Make sure the panel is off before trying to
+ * change the mode
+ */
+ ironlake_edp_backlight_off(intel_dp);
intel_dp_link_down(intel_dp);
+ ironlake_edp_panel_off(encoder);
}
static void intel_dp_commit(struct drm_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
struct drm_device *dev = encoder->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
- if (is_edp(intel_dp))
- ironlake_edp_panel_vdd_on(intel_dp);
-
+ ironlake_edp_panel_vdd_on(intel_dp);
+ intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
intel_dp_start_link_train(intel_dp);
-
- if (is_edp(intel_dp)) {
- ironlake_edp_panel_on(intel_dp);
- ironlake_edp_panel_vdd_off(intel_dp);
- }
+ ironlake_edp_panel_on(intel_dp);
+ ironlake_edp_panel_vdd_off(intel_dp, true);
intel_dp_complete_link_train(intel_dp);
-
- if (is_edp(intel_dp))
- ironlake_edp_backlight_on(dev);
+ ironlake_edp_backlight_on(intel_dp);
intel_dp->dpms_mode = DRM_MODE_DPMS_ON;
+
+ if (HAS_PCH_CPT(dev))
+ intel_cpt_verify_modeset(dev, intel_crtc->pipe);
}
static void
@@ -1034,28 +1229,27 @@
uint32_t dp_reg = I915_READ(intel_dp->output_reg);
if (mode != DRM_MODE_DPMS_ON) {
+ ironlake_edp_panel_vdd_on(intel_dp);
if (is_edp(intel_dp))
- ironlake_edp_backlight_off(dev);
+ ironlake_edp_backlight_off(intel_dp);
intel_dp_sink_dpms(intel_dp, mode);
intel_dp_link_down(intel_dp);
- if (is_edp(intel_dp))
- ironlake_edp_panel_off(dev);
+ ironlake_edp_panel_off(encoder);
if (is_edp(intel_dp) && !is_pch_edp(intel_dp))
ironlake_edp_pll_off(encoder);
+ ironlake_edp_panel_vdd_off(intel_dp, false);
} else {
- if (is_edp(intel_dp))
- ironlake_edp_panel_vdd_on(intel_dp);
+ ironlake_edp_panel_vdd_on(intel_dp);
intel_dp_sink_dpms(intel_dp, mode);
if (!(dp_reg & DP_PORT_EN)) {
intel_dp_start_link_train(intel_dp);
- if (is_edp(intel_dp)) {
- ironlake_edp_panel_on(intel_dp);
- ironlake_edp_panel_vdd_off(intel_dp);
- }
+ ironlake_edp_panel_on(intel_dp);
+ ironlake_edp_panel_vdd_off(intel_dp, true);
intel_dp_complete_link_train(intel_dp);
- }
- if (is_edp(intel_dp))
- ironlake_edp_backlight_on(dev);
+ ironlake_edp_backlight_on(intel_dp);
+ } else
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ ironlake_edp_backlight_on(intel_dp);
}
intel_dp->dpms_mode = mode;
}
@@ -1364,7 +1558,7 @@
DP_LINK_CONFIGURATION_SIZE);
DP |= DP_PORT_EN;
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
DP &= ~DP_LINK_TRAIN_MASK_CPT;
else
DP &= ~DP_LINK_TRAIN_MASK;
@@ -1383,7 +1577,7 @@
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
else
reg = DP | DP_LINK_TRAIN_PAT_1;
@@ -1458,7 +1652,7 @@
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
else
reg = DP | DP_LINK_TRAIN_PAT_2;
@@ -1499,7 +1693,7 @@
++tries;
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_OFF_CPT;
else
reg = DP | DP_LINK_TRAIN_OFF;
@@ -1529,7 +1723,7 @@
udelay(100);
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) {
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) {
DP &= ~DP_LINK_TRAIN_MASK_CPT;
I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
} else {
@@ -1578,13 +1772,14 @@
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
+ msleep(intel_dp->panel_power_down_delay);
}
static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp)
{
if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
- sizeof (intel_dp->dpcd)) &&
+ sizeof(intel_dp->dpcd)) &&
(intel_dp->dpcd[DP_DPCD_REV] != 0)) {
return true;
}
@@ -1592,6 +1787,27 @@
return false;
}
+static bool
+intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
+{
+ int ret;
+
+ ret = intel_dp_aux_native_read_retry(intel_dp,
+ DP_DEVICE_SERVICE_IRQ_VECTOR,
+ sink_irq_vector, 1);
+ if (!ret)
+ return false;
+
+ return true;
+}
+
+static void
+intel_dp_handle_test_request(struct intel_dp *intel_dp)
+{
+ /* NAK by default */
+ intel_dp_aux_native_write_1(intel_dp, DP_TEST_RESPONSE, DP_TEST_ACK);
+}
+
/*
* According to DP spec
* 5.1.2:
@@ -1604,6 +1820,8 @@
static void
intel_dp_check_link_status(struct intel_dp *intel_dp)
{
+ u8 sink_irq_vector;
+
if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON)
return;
@@ -1622,6 +1840,20 @@
return;
}
+ /* Try to read the source of the interrupt */
+ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+ intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) {
+ /* Clear interrupt source */
+ intel_dp_aux_native_write_1(intel_dp,
+ DP_DEVICE_SERVICE_IRQ_VECTOR,
+ sink_irq_vector);
+
+ if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
+ intel_dp_handle_test_request(intel_dp);
+ if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
+ DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
+ }
+
if (!intel_channel_eq_ok(intel_dp)) {
DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
drm_get_encoder_name(&intel_dp->base.base));
@@ -1683,6 +1915,31 @@
return intel_dp_detect_dpcd(intel_dp);
}
+static struct edid *
+intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
+{
+ struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct edid *edid;
+
+ ironlake_edp_panel_vdd_on(intel_dp);
+ edid = drm_get_edid(connector, adapter);
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ return edid;
+}
+
+static int
+intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *adapter)
+{
+ struct intel_dp *intel_dp = intel_attached_dp(connector);
+ int ret;
+
+ ironlake_edp_panel_vdd_on(intel_dp);
+ ret = intel_ddc_get_modes(connector, adapter);
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ return ret;
+}
+
+
/**
* Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
*
@@ -1715,7 +1972,7 @@
if (intel_dp->force_audio) {
intel_dp->has_audio = intel_dp->force_audio > 0;
} else {
- edid = drm_get_edid(connector, &intel_dp->adapter);
+ edid = intel_dp_get_edid(connector, &intel_dp->adapter);
if (edid) {
intel_dp->has_audio = drm_detect_monitor_audio(edid);
connector->display_info.raw_edid = NULL;
@@ -1736,28 +1993,36 @@
/* We should parse the EDID data and find out if it has an audio sink
*/
- ret = intel_ddc_get_modes(connector, &intel_dp->adapter);
+ ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
if (ret) {
- if (is_edp(intel_dp) && !dev_priv->panel_fixed_mode) {
+ if (is_edp(intel_dp) && !intel_dp->panel_fixed_mode) {
struct drm_display_mode *newmode;
list_for_each_entry(newmode, &connector->probed_modes,
head) {
- if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
- dev_priv->panel_fixed_mode =
+ if ((newmode->type & DRM_MODE_TYPE_PREFERRED)) {
+ intel_dp->panel_fixed_mode =
drm_mode_duplicate(dev, newmode);
break;
}
}
}
-
return ret;
}
/* if eDP has no EDID, try to use fixed panel mode from VBT */
if (is_edp(intel_dp)) {
- if (dev_priv->panel_fixed_mode != NULL) {
+ /* initialize panel mode from VBT if available for eDP */
+ if (intel_dp->panel_fixed_mode == NULL && dev_priv->lfp_lvds_vbt_mode != NULL) {
+ intel_dp->panel_fixed_mode =
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+ if (intel_dp->panel_fixed_mode) {
+ intel_dp->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ }
+ }
+ if (intel_dp->panel_fixed_mode) {
struct drm_display_mode *mode;
- mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+ mode = drm_mode_duplicate(dev, intel_dp->panel_fixed_mode);
drm_mode_probed_add(connector, mode);
return 1;
}
@@ -1772,7 +2037,7 @@
struct edid *edid;
bool has_audio = false;
- edid = drm_get_edid(connector, &intel_dp->adapter);
+ edid = intel_dp_get_edid(connector, &intel_dp->adapter);
if (edid) {
has_audio = drm_detect_monitor_audio(edid);
@@ -1839,7 +2104,7 @@
}
static void
-intel_dp_destroy (struct drm_connector *connector)
+intel_dp_destroy(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
@@ -1857,6 +2122,10 @@
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
+ if (is_edp(intel_dp)) {
+ cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+ ironlake_panel_vdd_off_sync(intel_dp);
+ }
kfree(intel_dp);
}
@@ -1896,7 +2165,7 @@
/* Return which DP Port should be selected for Transcoder DP control */
int
-intel_trans_dp_port_sel (struct drm_crtc *crtc)
+intel_trans_dp_port_sel(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
@@ -1993,10 +2262,13 @@
else if (output_reg == DP_D || output_reg == PCH_DP_D)
intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
- if (is_edp(intel_dp))
+ if (is_edp(intel_dp)) {
intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
+ INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
+ ironlake_panel_vdd_work);
+ }
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
@@ -2032,25 +2304,60 @@
break;
}
- intel_dp_i2c_init(intel_dp, intel_connector, name);
-
/* Cache some DPCD data in the eDP case */
if (is_edp(intel_dp)) {
bool ret;
- u32 pp_on, pp_div;
+ struct edp_power_seq cur, vbt;
+ u32 pp_on, pp_off, pp_div;
pp_on = I915_READ(PCH_PP_ON_DELAYS);
+ pp_off = I915_READ(PCH_PP_OFF_DELAYS);
pp_div = I915_READ(PCH_PP_DIVISOR);
- /* Get T3 & T12 values (note: VESA not bspec terminology) */
- dev_priv->panel_t3 = (pp_on & 0x1fff0000) >> 16;
- dev_priv->panel_t3 /= 10; /* t3 in 100us units */
- dev_priv->panel_t12 = pp_div & 0xf;
- dev_priv->panel_t12 *= 100; /* t12 in 100ms units */
+ /* Pull timing values out of registers */
+ cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
+ PANEL_POWER_UP_DELAY_SHIFT;
+
+ cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
+ PANEL_LIGHT_ON_DELAY_SHIFT;
+
+ cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
+ PANEL_LIGHT_OFF_DELAY_SHIFT;
+
+ cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
+ PANEL_POWER_DOWN_DELAY_SHIFT;
+
+ cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
+ PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
+
+ DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+ cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
+
+ vbt = dev_priv->edp.pps;
+
+ DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+ vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12);
+
+#define get_delay(field) ((max(cur.field, vbt.field) + 9) / 10)
+
+ intel_dp->panel_power_up_delay = get_delay(t1_t3);
+ intel_dp->backlight_on_delay = get_delay(t8);
+ intel_dp->backlight_off_delay = get_delay(t9);
+ intel_dp->panel_power_down_delay = get_delay(t10);
+ intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
+
+ DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
+ intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
+ intel_dp->panel_power_cycle_delay);
+
+ DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
+ intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+
+ intel_dp->panel_off_jiffies = jiffies - intel_dp->panel_power_down_delay;
ironlake_edp_panel_vdd_on(intel_dp);
ret = intel_dp_get_dpcd(intel_dp);
- ironlake_edp_panel_vdd_off(intel_dp);
+ ironlake_edp_panel_vdd_off(intel_dp, false);
if (ret) {
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
dev_priv->no_aux_handshake =
@@ -2065,18 +2372,11 @@
}
}
+ intel_dp_i2c_init(intel_dp, intel_connector, name);
+
intel_encoder->hot_plug = intel_dp_hot_plug;
if (is_edp(intel_dp)) {
- /* initialize panel mode from VBT if available for eDP */
- if (dev_priv->lfp_lvds_vbt_mode) {
- dev_priv->panel_fixed_mode =
- drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
- if (dev_priv->panel_fixed_mode) {
- dev_priv->panel_fixed_mode->type |=
- DRM_MODE_TYPE_PREFERRED;
- }
- }
dev_priv->int_edp_connector = connector;
intel_panel_setup_backlight(dev);
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index fe1099d..bd9a604 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -34,7 +34,7 @@
#define _wait_for(COND, MS, W) ({ \
unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
int ret__ = 0; \
- while (! (COND)) { \
+ while (!(COND)) { \
if (time_after(jiffies, timeout__)) { \
ret__ = -ETIMEDOUT; \
break; \
@@ -49,10 +49,10 @@
#define MSLEEP(x) do { \
if (in_dbg_master()) \
- mdelay(x); \
+ mdelay(x); \
else \
msleep(x); \
-} while(0)
+} while (0)
#define KHz(x) (1000*x)
#define MHz(x) KHz(1000*x)
@@ -171,6 +171,9 @@
int16_t cursor_width, cursor_height;
bool cursor_visible;
unsigned int bpp;
+
+ bool no_pll; /* tertiary pipe for IVB */
+ bool use_pll_a;
};
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
@@ -184,7 +187,7 @@
#define DIP_VERSION_AVI 0x2
#define DIP_LEN_AVI 13
-#define DIP_TYPE_SPD 0x3
+#define DIP_TYPE_SPD 0x83
#define DIP_VERSION_SPD 0x1
#define DIP_LEN_SPD 25
#define DIP_SPD_UNKNOWN 0
@@ -284,7 +287,7 @@
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
extern bool intel_dpd_is_edp(struct drm_device *dev);
-extern void intel_edp_link_config (struct intel_encoder *, int *, int *);
+extern void intel_edp_link_config(struct intel_encoder *, int *, int *);
extern bool intel_encoder_is_pch_edp(struct drm_encoder *encoder);
/* intel_panel.c */
@@ -304,8 +307,8 @@
extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
-extern void intel_encoder_prepare (struct drm_encoder *encoder);
-extern void intel_encoder_commit (struct drm_encoder *encoder);
+extern void intel_encoder_prepare(struct drm_encoder *encoder);
+extern void intel_encoder_commit(struct drm_encoder *encoder);
extern void intel_encoder_destroy(struct drm_encoder *encoder);
static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
@@ -377,4 +380,8 @@
extern void intel_fb_restore_mode(struct drm_device *dev);
extern void intel_init_clock_gating(struct drm_device *dev);
+extern void intel_write_eld(struct drm_encoder *encoder,
+ struct drm_display_mode *mode);
+extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe);
+
#endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 226ba83..d4f5a0b 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -69,8 +69,7 @@
frame->checksum = 0;
frame->ecc = 0;
- /* Header isn't part of the checksum */
- for (i = 5; i < frame->len; i++)
+ for (i = 0; i < frame->len + DIP_HEADER_SIZE; i++)
sum += data[i];
frame->checksum = 0x100 - sum;
@@ -104,7 +103,7 @@
flags |= VIDEO_DIP_ENABLE_AVI | VIDEO_DIP_FREQ_VSYNC;
break;
case DIP_TYPE_SPD:
- flags |= VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_FREQ_2VSYNC;
+ flags |= VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_FREQ_VSYNC;
break;
default:
DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
@@ -165,9 +164,9 @@
flags = intel_infoframe_index(frame);
- val &= ~VIDEO_DIP_SELECT_MASK;
+ val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
- I915_WRITE(reg, val | flags);
+ I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
for (i = 0; i < len; i += 4) {
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
@@ -245,16 +244,17 @@
sdvox |= HDMI_MODE_SELECT;
if (intel_hdmi->has_audio) {
+ DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n",
+ pipe_name(intel_crtc->pipe));
sdvox |= SDVO_AUDIO_ENABLE;
sdvox |= SDVO_NULL_PACKETS_DURING_VSYNC;
+ intel_write_eld(encoder, adjusted_mode);
}
- if (intel_crtc->pipe == 1) {
- if (HAS_PCH_CPT(dev))
- sdvox |= PORT_TRANS_B_SEL_CPT;
- else
- sdvox |= SDVO_PIPE_B_SELECT;
- }
+ if (HAS_PCH_CPT(dev))
+ sdvox |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
+ else if (intel_crtc->pipe == 1)
+ sdvox |= SDVO_PIPE_B_SELECT;
I915_WRITE(intel_hdmi->sdvox_reg, sdvox);
POSTING_READ(intel_hdmi->sdvox_reg);
@@ -486,6 +486,7 @@
struct intel_encoder *intel_encoder;
struct intel_connector *intel_connector;
struct intel_hdmi *intel_hdmi;
+ int i;
intel_hdmi = kzalloc(sizeof(struct intel_hdmi), GFP_KERNEL);
if (!intel_hdmi)
@@ -511,7 +512,7 @@
connector->polled = DRM_CONNECTOR_POLL_HPD;
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
/* Set up the DDC bus. */
if (sdvox_reg == SDVOB) {
@@ -538,10 +539,14 @@
intel_hdmi->sdvox_reg = sdvox_reg;
- if (!HAS_PCH_SPLIT(dev))
+ if (!HAS_PCH_SPLIT(dev)) {
intel_hdmi->write_infoframe = i9xx_write_infoframe;
- else
+ I915_WRITE(VIDEO_DIP_CTL, 0);
+ } else {
intel_hdmi->write_infoframe = ironlake_write_infoframe;
+ for_each_pipe(i)
+ I915_WRITE(TVIDEO_DIP_CTL(i), 0);
+ }
drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs);
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d98cee60..9ed5380e 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -422,13 +422,7 @@
{
struct intel_gmbus *bus = to_intel_gmbus(adapter);
- /* speed:
- * 0x0 = 100 KHz
- * 0x1 = 50 KHz
- * 0x2 = 400 KHz
- * 0x3 = 1000 Khz
- */
- bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | (speed << 8);
+ bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | speed;
}
void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 31da77f..42f165a 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -888,9 +888,11 @@
intel_encoder->type = INTEL_OUTPUT_LVDS;
intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
- intel_encoder->crtc_mask = (1 << 1);
- if (INTEL_INFO(dev)->gen >= 5)
- intel_encoder->crtc_mask |= (1 << 0);
+ if (HAS_PCH_SPLIT(dev))
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+ else
+ intel_encoder->crtc_mask = (1 << 1);
+
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index 3b26a3b..be2c6fe 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/fb.h>
+#include <drm/drm_edid.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drv.h"
@@ -74,6 +75,7 @@
if (edid) {
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
+ drm_edid_to_eld(connector, edid);
connector->display_info.raw_edid = NULL;
kfree(edid);
}
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index b8e8158b..289140b 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -51,61 +51,61 @@
#define MBOX_ASLE (1<<2)
struct opregion_header {
- u8 signature[16];
- u32 size;
- u32 opregion_ver;
- u8 bios_ver[32];
- u8 vbios_ver[16];
- u8 driver_ver[16];
- u32 mboxes;
- u8 reserved[164];
+ u8 signature[16];
+ u32 size;
+ u32 opregion_ver;
+ u8 bios_ver[32];
+ u8 vbios_ver[16];
+ u8 driver_ver[16];
+ u32 mboxes;
+ u8 reserved[164];
} __attribute__((packed));
/* OpRegion mailbox #1: public ACPI methods */
struct opregion_acpi {
- u32 drdy; /* driver readiness */
- u32 csts; /* notification status */
- u32 cevt; /* current event */
- u8 rsvd1[20];
- u32 didl[8]; /* supported display devices ID list */
- u32 cpdl[8]; /* currently presented display list */
- u32 cadl[8]; /* currently active display list */
- u32 nadl[8]; /* next active devices list */
- u32 aslp; /* ASL sleep time-out */
- u32 tidx; /* toggle table index */
- u32 chpd; /* current hotplug enable indicator */
- u32 clid; /* current lid state*/
- u32 cdck; /* current docking state */
- u32 sxsw; /* Sx state resume */
- u32 evts; /* ASL supported events */
- u32 cnot; /* current OS notification */
- u32 nrdy; /* driver status */
- u8 rsvd2[60];
+ u32 drdy; /* driver readiness */
+ u32 csts; /* notification status */
+ u32 cevt; /* current event */
+ u8 rsvd1[20];
+ u32 didl[8]; /* supported display devices ID list */
+ u32 cpdl[8]; /* currently presented display list */
+ u32 cadl[8]; /* currently active display list */
+ u32 nadl[8]; /* next active devices list */
+ u32 aslp; /* ASL sleep time-out */
+ u32 tidx; /* toggle table index */
+ u32 chpd; /* current hotplug enable indicator */
+ u32 clid; /* current lid state*/
+ u32 cdck; /* current docking state */
+ u32 sxsw; /* Sx state resume */
+ u32 evts; /* ASL supported events */
+ u32 cnot; /* current OS notification */
+ u32 nrdy; /* driver status */
+ u8 rsvd2[60];
} __attribute__((packed));
/* OpRegion mailbox #2: SWSCI */
struct opregion_swsci {
- u32 scic; /* SWSCI command|status|data */
- u32 parm; /* command parameters */
- u32 dslp; /* driver sleep time-out */
- u8 rsvd[244];
+ u32 scic; /* SWSCI command|status|data */
+ u32 parm; /* command parameters */
+ u32 dslp; /* driver sleep time-out */
+ u8 rsvd[244];
} __attribute__((packed));
/* OpRegion mailbox #3: ASLE */
struct opregion_asle {
- u32 ardy; /* driver readiness */
- u32 aslc; /* ASLE interrupt command */
- u32 tche; /* technology enabled indicator */
- u32 alsi; /* current ALS illuminance reading */
- u32 bclp; /* backlight brightness to set */
- u32 pfit; /* panel fitting state */
- u32 cblv; /* current brightness level */
- u16 bclm[20]; /* backlight level duty cycle mapping table */
- u32 cpfm; /* current panel fitting mode */
- u32 epfm; /* enabled panel fitting modes */
- u8 plut[74]; /* panel LUT and identifier */
- u32 pfmb; /* PWM freq and min brightness */
- u8 rsvd[102];
+ u32 ardy; /* driver readiness */
+ u32 aslc; /* ASLE interrupt command */
+ u32 tche; /* technology enabled indicator */
+ u32 alsi; /* current ALS illuminance reading */
+ u32 bclp; /* backlight brightness to set */
+ u32 pfit; /* panel fitting state */
+ u32 cblv; /* current brightness level */
+ u16 bclm[20]; /* backlight level duty cycle mapping table */
+ u32 cpfm; /* current panel fitting mode */
+ u32 epfm; /* enabled panel fitting modes */
+ u8 plut[74]; /* panel LUT and identifier */
+ u32 pfmb; /* PWM freq and min brightness */
+ u8 rsvd[102];
} __attribute__((packed));
/* ASLE irq request bits */
@@ -361,7 +361,7 @@
list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
if (i >= 8) {
- dev_printk (KERN_ERR, &dev->pdev->dev,
+ dev_printk(KERN_ERR, &dev->pdev->dev,
"More than 8 outputs detected\n");
return;
}
@@ -387,7 +387,7 @@
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
int output_type = ACPI_OTHER_OUTPUT;
if (i >= 8) {
- dev_printk (KERN_ERR, &dev->pdev->dev,
+ dev_printk(KERN_ERR, &dev->pdev->dev,
"More than 8 outputs detected\n");
return;
}
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index d360380..cdf17d4 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -117,57 +117,57 @@
/* memory bufferd overlay registers */
struct overlay_registers {
- u32 OBUF_0Y;
- u32 OBUF_1Y;
- u32 OBUF_0U;
- u32 OBUF_0V;
- u32 OBUF_1U;
- u32 OBUF_1V;
- u32 OSTRIDE;
- u32 YRGB_VPH;
- u32 UV_VPH;
- u32 HORZ_PH;
- u32 INIT_PHS;
- u32 DWINPOS;
- u32 DWINSZ;
- u32 SWIDTH;
- u32 SWIDTHSW;
- u32 SHEIGHT;
- u32 YRGBSCALE;
- u32 UVSCALE;
- u32 OCLRC0;
- u32 OCLRC1;
- u32 DCLRKV;
- u32 DCLRKM;
- u32 SCLRKVH;
- u32 SCLRKVL;
- u32 SCLRKEN;
- u32 OCONFIG;
- u32 OCMD;
- u32 RESERVED1; /* 0x6C */
- u32 OSTART_0Y;
- u32 OSTART_1Y;
- u32 OSTART_0U;
- u32 OSTART_0V;
- u32 OSTART_1U;
- u32 OSTART_1V;
- u32 OTILEOFF_0Y;
- u32 OTILEOFF_1Y;
- u32 OTILEOFF_0U;
- u32 OTILEOFF_0V;
- u32 OTILEOFF_1U;
- u32 OTILEOFF_1V;
- u32 FASTHSCALE; /* 0xA0 */
- u32 UVSCALEV; /* 0xA4 */
- u32 RESERVEDC[(0x200 - 0xA8) / 4]; /* 0xA8 - 0x1FC */
- u16 Y_VCOEFS[N_VERT_Y_TAPS * N_PHASES]; /* 0x200 */
- u16 RESERVEDD[0x100 / 2 - N_VERT_Y_TAPS * N_PHASES];
- u16 Y_HCOEFS[N_HORIZ_Y_TAPS * N_PHASES]; /* 0x300 */
- u16 RESERVEDE[0x200 / 2 - N_HORIZ_Y_TAPS * N_PHASES];
- u16 UV_VCOEFS[N_VERT_UV_TAPS * N_PHASES]; /* 0x500 */
- u16 RESERVEDF[0x100 / 2 - N_VERT_UV_TAPS * N_PHASES];
- u16 UV_HCOEFS[N_HORIZ_UV_TAPS * N_PHASES]; /* 0x600 */
- u16 RESERVEDG[0x100 / 2 - N_HORIZ_UV_TAPS * N_PHASES];
+ u32 OBUF_0Y;
+ u32 OBUF_1Y;
+ u32 OBUF_0U;
+ u32 OBUF_0V;
+ u32 OBUF_1U;
+ u32 OBUF_1V;
+ u32 OSTRIDE;
+ u32 YRGB_VPH;
+ u32 UV_VPH;
+ u32 HORZ_PH;
+ u32 INIT_PHS;
+ u32 DWINPOS;
+ u32 DWINSZ;
+ u32 SWIDTH;
+ u32 SWIDTHSW;
+ u32 SHEIGHT;
+ u32 YRGBSCALE;
+ u32 UVSCALE;
+ u32 OCLRC0;
+ u32 OCLRC1;
+ u32 DCLRKV;
+ u32 DCLRKM;
+ u32 SCLRKVH;
+ u32 SCLRKVL;
+ u32 SCLRKEN;
+ u32 OCONFIG;
+ u32 OCMD;
+ u32 RESERVED1; /* 0x6C */
+ u32 OSTART_0Y;
+ u32 OSTART_1Y;
+ u32 OSTART_0U;
+ u32 OSTART_0V;
+ u32 OSTART_1U;
+ u32 OSTART_1V;
+ u32 OTILEOFF_0Y;
+ u32 OTILEOFF_1Y;
+ u32 OTILEOFF_0U;
+ u32 OTILEOFF_0V;
+ u32 OTILEOFF_1U;
+ u32 OTILEOFF_1V;
+ u32 FASTHSCALE; /* 0xA0 */
+ u32 UVSCALEV; /* 0xA4 */
+ u32 RESERVEDC[(0x200 - 0xA8) / 4]; /* 0xA8 - 0x1FC */
+ u16 Y_VCOEFS[N_VERT_Y_TAPS * N_PHASES]; /* 0x200 */
+ u16 RESERVEDD[0x100 / 2 - N_VERT_Y_TAPS * N_PHASES];
+ u16 Y_HCOEFS[N_HORIZ_Y_TAPS * N_PHASES]; /* 0x300 */
+ u16 RESERVEDE[0x200 / 2 - N_HORIZ_Y_TAPS * N_PHASES];
+ u16 UV_VCOEFS[N_VERT_UV_TAPS * N_PHASES]; /* 0x500 */
+ u16 RESERVEDF[0x100 / 2 - N_VERT_UV_TAPS * N_PHASES];
+ u16 UV_HCOEFS[N_HORIZ_UV_TAPS * N_PHASES]; /* 0x600 */
+ u16 RESERVEDG[0x100 / 2 - N_HORIZ_UV_TAPS * N_PHASES];
};
struct intel_overlay {
@@ -192,7 +192,7 @@
static struct overlay_registers *
intel_overlay_map_regs(struct intel_overlay *overlay)
{
- drm_i915_private_t *dev_priv = overlay->dev->dev_private;
+ drm_i915_private_t *dev_priv = overlay->dev->dev_private;
struct overlay_registers *regs;
if (OVERLAY_NEEDS_PHYSICAL(overlay->dev))
@@ -264,7 +264,7 @@
mode = drm_mode_duplicate(dev, &vesa_640x480);
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
- if(!drm_crtc_helper_set_mode(&crtc->base, mode,
+ if (!drm_crtc_helper_set_mode(&crtc->base, mode,
crtc->base.x, crtc->base.y,
crtc->base.fb))
return 0;
@@ -332,7 +332,7 @@
bool load_polyphase_filter)
{
struct drm_device *dev = overlay->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_request *request;
u32 flip_addr = overlay->flip_addr;
u32 tmp;
@@ -359,7 +359,7 @@
}
OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE);
OUT_RING(flip_addr);
- ADVANCE_LP_RING();
+ ADVANCE_LP_RING();
ret = i915_add_request(LP_RING(dev_priv), NULL, request);
if (ret) {
@@ -583,7 +583,7 @@
ret = ((offset + width + mask) >> shift) - (offset >> shift);
if (!IS_GEN2(dev))
ret <<= 1;
- ret -=1;
+ ret -= 1;
return ret << 2;
}
@@ -817,7 +817,7 @@
regs->SWIDTHSW = calc_swidthsw(overlay->dev,
params->offset_Y, tmp_width);
regs->SHEIGHT = params->src_h;
- regs->OBUF_0Y = new_bo->gtt_offset + params-> offset_Y;
+ regs->OBUF_0Y = new_bo->gtt_offset + params->offset_Y;
regs->OSTRIDE = params->stride_Y;
if (params->format & I915_OVERLAY_YUV_PLANAR) {
@@ -917,7 +917,7 @@
* line with the intel documentation for the i965
*/
if (INTEL_INFO(dev)->gen >= 4) {
- /* on i965 use the PGM reg to read out the autoscaler values */
+ /* on i965 use the PGM reg to read out the autoscaler values */
ratio = I915_READ(PFIT_PGM_RATIOS) >> PFIT_VERT_SCALE_SHIFT_965;
} else {
if (pfit_control & VERT_AUTO_SCALE)
@@ -1098,7 +1098,7 @@
}
int intel_overlay_put_image(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+ struct drm_file *file_priv)
{
struct drm_intel_overlay_put_image *put_image_rec = data;
drm_i915_private_t *dev_priv = dev->dev_private;
@@ -1301,10 +1301,10 @@
}
int intel_overlay_attrs(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+ struct drm_file *file_priv)
{
struct drm_intel_overlay_attrs *attrs = data;
- drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_overlay *overlay;
struct overlay_registers *regs;
int ret;
@@ -1393,7 +1393,7 @@
void intel_setup_overlay(struct drm_device *dev)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_overlay *overlay;
struct drm_i915_gem_object *reg_bo;
struct overlay_registers *regs;
@@ -1421,24 +1421,24 @@
ret = i915_gem_attach_phys_object(dev, reg_bo,
I915_GEM_PHYS_OVERLAY_REGS,
PAGE_SIZE);
- if (ret) {
- DRM_ERROR("failed to attach phys overlay regs\n");
- goto out_free_bo;
- }
+ if (ret) {
+ DRM_ERROR("failed to attach phys overlay regs\n");
+ goto out_free_bo;
+ }
overlay->flip_addr = reg_bo->phys_obj->handle->busaddr;
} else {
ret = i915_gem_object_pin(reg_bo, PAGE_SIZE, true);
if (ret) {
- DRM_ERROR("failed to pin overlay register bo\n");
- goto out_free_bo;
- }
+ DRM_ERROR("failed to pin overlay register bo\n");
+ goto out_free_bo;
+ }
overlay->flip_addr = reg_bo->gtt_offset;
ret = i915_gem_object_set_to_gtt_domain(reg_bo, true);
if (ret) {
- DRM_ERROR("failed to move overlay register bo into the GTT\n");
- goto out_unpin_bo;
- }
+ DRM_ERROR("failed to move overlay register bo into the GTT\n");
+ goto out_unpin_bo;
+ }
}
/* init all values */
@@ -1525,7 +1525,7 @@
struct intel_overlay_error_state *
intel_overlay_capture_error_state(struct drm_device *dev)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_overlay *overlay = dev_priv->overlay;
struct intel_overlay_error_state *error;
struct overlay_registers __iomem *regs;
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index a9e0c7b..499d4c0 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -84,7 +84,7 @@
if (scaled_width > scaled_height) { /* pillar */
width = scaled_height / mode->vdisplay;
if (width & 1)
- width++;
+ width++;
x = (adjusted_mode->hdisplay - width + 1) / 2;
y = 0;
height = adjusted_mode->vdisplay;
@@ -206,7 +206,7 @@
if (IS_PINEVIEW(dev))
val >>= 1;
- if (is_backlight_combination_mode(dev)){
+ if (is_backlight_combination_mode(dev)) {
u8 lbpc;
val &= ~1;
@@ -226,7 +226,7 @@
I915_WRITE(BLC_PWM_CPU_CTL, val | level);
}
-void intel_panel_set_backlight(struct drm_device *dev, u32 level)
+static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp;
@@ -236,7 +236,7 @@
if (HAS_PCH_SPLIT(dev))
return intel_pch_panel_set_backlight(dev, level);
- if (is_backlight_combination_mode(dev)){
+ if (is_backlight_combination_mode(dev)) {
u32 max = intel_panel_get_max_backlight(dev);
u8 lbpc;
@@ -254,16 +254,21 @@
I915_WRITE(BLC_PWM_CTL, tmp | level);
}
+void intel_panel_set_backlight(struct drm_device *dev, u32 level)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->backlight_level = level;
+ if (dev_priv->backlight_enabled)
+ intel_panel_actually_set_backlight(dev, level);
+}
+
void intel_panel_disable_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (dev_priv->backlight_enabled) {
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
- dev_priv->backlight_enabled = false;
- }
-
- intel_panel_set_backlight(dev, 0);
+ dev_priv->backlight_enabled = false;
+ intel_panel_actually_set_backlight(dev, 0);
}
void intel_panel_enable_backlight(struct drm_device *dev)
@@ -273,8 +278,8 @@
if (dev_priv->backlight_level == 0)
dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
- intel_panel_set_backlight(dev, dev_priv->backlight_level);
dev_priv->backlight_enabled = true;
+ intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
}
static void intel_panel_init_backlight(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index c30626e..ca70e2f 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -34,6 +34,16 @@
#include "i915_trace.h"
#include "intel_drv.h"
+/*
+ * 965+ support PIPE_CONTROL commands, which provide finer grained control
+ * over cache flushing.
+ */
+struct pipe_control {
+ struct drm_i915_gem_object *obj;
+ volatile u32 *cpu_page;
+ u32 gtt_offset;
+};
+
static inline int ring_space(struct intel_ring_buffer *ring)
{
int space = (ring->head & HEAD_ADDR) - (ring->tail + 8);
@@ -123,6 +133,118 @@
return 0;
}
+/**
+ * Emits a PIPE_CONTROL with a non-zero post-sync operation, for
+ * implementing two workarounds on gen6. From section 1.4.7.1
+ * "PIPE_CONTROL" of the Sandy Bridge PRM volume 2 part 1:
+ *
+ * [DevSNB-C+{W/A}] Before any depth stall flush (including those
+ * produced by non-pipelined state commands), software needs to first
+ * send a PIPE_CONTROL with no bits set except Post-Sync Operation !=
+ * 0.
+ *
+ * [Dev-SNB{W/A}]: Before a PIPE_CONTROL with Write Cache Flush Enable
+ * =1, a PIPE_CONTROL with any non-zero post-sync-op is required.
+ *
+ * And the workaround for these two requires this workaround first:
+ *
+ * [Dev-SNB{W/A}]: Pipe-control with CS-stall bit set must be sent
+ * BEFORE the pipe-control with a post-sync op and no write-cache
+ * flushes.
+ *
+ * And this last workaround is tricky because of the requirements on
+ * that bit. From section 1.4.7.2.3 "Stall" of the Sandy Bridge PRM
+ * volume 2 part 1:
+ *
+ * "1 of the following must also be set:
+ * - Render Target Cache Flush Enable ([12] of DW1)
+ * - Depth Cache Flush Enable ([0] of DW1)
+ * - Stall at Pixel Scoreboard ([1] of DW1)
+ * - Depth Stall ([13] of DW1)
+ * - Post-Sync Operation ([13] of DW1)
+ * - Notify Enable ([8] of DW1)"
+ *
+ * The cache flushes require the workaround flush that triggered this
+ * one, so we can't use it. Depth stall would trigger the same.
+ * Post-sync nonzero is what triggered this second workaround, so we
+ * can't use that one either. Notify enable is IRQs, which aren't
+ * really our business. That leaves only stall at scoreboard.
+ */
+static int
+intel_emit_post_sync_nonzero_flush(struct intel_ring_buffer *ring)
+{
+ struct pipe_control *pc = ring->private;
+ u32 scratch_addr = pc->gtt_offset + 128;
+ int ret;
+
+
+ ret = intel_ring_begin(ring, 6);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
+ intel_ring_emit(ring, PIPE_CONTROL_CS_STALL |
+ PIPE_CONTROL_STALL_AT_SCOREBOARD);
+ intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); /* address */
+ intel_ring_emit(ring, 0); /* low dword */
+ intel_ring_emit(ring, 0); /* high dword */
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_advance(ring);
+
+ ret = intel_ring_begin(ring, 6);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
+ intel_ring_emit(ring, PIPE_CONTROL_QW_WRITE);
+ intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); /* address */
+ intel_ring_emit(ring, 0);
+ intel_ring_emit(ring, 0);
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_advance(ring);
+
+ return 0;
+}
+
+static int
+gen6_render_ring_flush(struct intel_ring_buffer *ring,
+ u32 invalidate_domains, u32 flush_domains)
+{
+ u32 flags = 0;
+ struct pipe_control *pc = ring->private;
+ u32 scratch_addr = pc->gtt_offset + 128;
+ int ret;
+
+ /* Force SNB workarounds for PIPE_CONTROL flushes */
+ intel_emit_post_sync_nonzero_flush(ring);
+
+ /* Just flush everything. Experiments have shown that reducing the
+ * number of bits based on the write domains has little performance
+ * impact.
+ */
+ flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE;
+ flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE;
+ flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE;
+ flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE;
+ flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE;
+
+ ret = intel_ring_begin(ring, 6);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
+ intel_ring_emit(ring, flags);
+ intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT);
+ intel_ring_emit(ring, 0); /* lower dword */
+ intel_ring_emit(ring, 0); /* uppwer dword */
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_advance(ring);
+
+ return 0;
+}
+
static void ring_write_tail(struct intel_ring_buffer *ring,
u32 value)
{
@@ -206,16 +328,6 @@
return 0;
}
-/*
- * 965+ support PIPE_CONTROL commands, which provide finer grained control
- * over cache flushing.
- */
-struct pipe_control {
- struct drm_i915_gem_object *obj;
- volatile u32 *cpu_page;
- u32 gtt_offset;
-};
-
static int
init_pipe_control(struct intel_ring_buffer *ring)
{
@@ -296,8 +408,7 @@
GFX_MODE_ENABLE(GFX_REPLAY_MODE));
}
- if (INTEL_INFO(dev)->gen >= 6) {
- } else if (IS_GEN5(dev)) {
+ if (INTEL_INFO(dev)->gen >= 5) {
ret = init_pipe_control(ring);
if (ret)
return ret;
@@ -315,83 +426,131 @@
}
static void
-update_semaphore(struct intel_ring_buffer *ring, int i, u32 seqno)
+update_mboxes(struct intel_ring_buffer *ring,
+ u32 seqno,
+ u32 mmio_offset)
{
- struct drm_device *dev = ring->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int id;
-
- /*
- * cs -> 1 = vcs, 0 = bcs
- * vcs -> 1 = bcs, 0 = cs,
- * bcs -> 1 = cs, 0 = vcs.
- */
- id = ring - dev_priv->ring;
- id += 2 - i;
- id %= 3;
-
- intel_ring_emit(ring,
- MI_SEMAPHORE_MBOX |
- MI_SEMAPHORE_REGISTER |
- MI_SEMAPHORE_UPDATE);
+ intel_ring_emit(ring, MI_SEMAPHORE_MBOX |
+ MI_SEMAPHORE_GLOBAL_GTT |
+ MI_SEMAPHORE_REGISTER |
+ MI_SEMAPHORE_UPDATE);
intel_ring_emit(ring, seqno);
- intel_ring_emit(ring,
- RING_SYNC_0(dev_priv->ring[id].mmio_base) + 4*i);
+ intel_ring_emit(ring, mmio_offset);
}
+/**
+ * gen6_add_request - Update the semaphore mailbox registers
+ *
+ * @ring - ring that is adding a request
+ * @seqno - return seqno stuck into the ring
+ *
+ * Update the mailbox registers in the *other* rings with the current seqno.
+ * This acts like a signal in the canonical semaphore.
+ */
static int
gen6_add_request(struct intel_ring_buffer *ring,
- u32 *result)
+ u32 *seqno)
{
- u32 seqno;
+ u32 mbox1_reg;
+ u32 mbox2_reg;
int ret;
ret = intel_ring_begin(ring, 10);
if (ret)
return ret;
- seqno = i915_gem_get_seqno(ring->dev);
- update_semaphore(ring, 0, seqno);
- update_semaphore(ring, 1, seqno);
+ mbox1_reg = ring->signal_mbox[0];
+ mbox2_reg = ring->signal_mbox[1];
+ *seqno = i915_gem_get_seqno(ring->dev);
+
+ update_mboxes(ring, *seqno, mbox1_reg);
+ update_mboxes(ring, *seqno, mbox2_reg);
intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
- intel_ring_emit(ring, seqno);
+ intel_ring_emit(ring, *seqno);
intel_ring_emit(ring, MI_USER_INTERRUPT);
intel_ring_advance(ring);
- *result = seqno;
return 0;
}
-int
-intel_ring_sync(struct intel_ring_buffer *ring,
- struct intel_ring_buffer *to,
+/**
+ * intel_ring_sync - sync the waiter to the signaller on seqno
+ *
+ * @waiter - ring that is waiting
+ * @signaller - ring which has, or will signal
+ * @seqno - seqno which the waiter will block on
+ */
+static int
+intel_ring_sync(struct intel_ring_buffer *waiter,
+ struct intel_ring_buffer *signaller,
+ int ring,
u32 seqno)
{
int ret;
+ u32 dw1 = MI_SEMAPHORE_MBOX |
+ MI_SEMAPHORE_COMPARE |
+ MI_SEMAPHORE_REGISTER;
- ret = intel_ring_begin(ring, 4);
+ ret = intel_ring_begin(waiter, 4);
if (ret)
return ret;
- intel_ring_emit(ring,
- MI_SEMAPHORE_MBOX |
- MI_SEMAPHORE_REGISTER |
- intel_ring_sync_index(ring, to) << 17 |
- MI_SEMAPHORE_COMPARE);
- intel_ring_emit(ring, seqno);
- intel_ring_emit(ring, 0);
- intel_ring_emit(ring, MI_NOOP);
- intel_ring_advance(ring);
+ intel_ring_emit(waiter, dw1 | signaller->semaphore_register[ring]);
+ intel_ring_emit(waiter, seqno);
+ intel_ring_emit(waiter, 0);
+ intel_ring_emit(waiter, MI_NOOP);
+ intel_ring_advance(waiter);
return 0;
}
+/* VCS->RCS (RVSYNC) or BCS->RCS (RBSYNC) */
+int
+render_ring_sync_to(struct intel_ring_buffer *waiter,
+ struct intel_ring_buffer *signaller,
+ u32 seqno)
+{
+ WARN_ON(signaller->semaphore_register[RCS] == MI_SEMAPHORE_SYNC_INVALID);
+ return intel_ring_sync(waiter,
+ signaller,
+ RCS,
+ seqno);
+}
+
+/* RCS->VCS (VRSYNC) or BCS->VCS (VBSYNC) */
+int
+gen6_bsd_ring_sync_to(struct intel_ring_buffer *waiter,
+ struct intel_ring_buffer *signaller,
+ u32 seqno)
+{
+ WARN_ON(signaller->semaphore_register[VCS] == MI_SEMAPHORE_SYNC_INVALID);
+ return intel_ring_sync(waiter,
+ signaller,
+ VCS,
+ seqno);
+}
+
+/* RCS->BCS (BRSYNC) or VCS->BCS (BVSYNC) */
+int
+gen6_blt_ring_sync_to(struct intel_ring_buffer *waiter,
+ struct intel_ring_buffer *signaller,
+ u32 seqno)
+{
+ WARN_ON(signaller->semaphore_register[BCS] == MI_SEMAPHORE_SYNC_INVALID);
+ return intel_ring_sync(waiter,
+ signaller,
+ BCS,
+ seqno);
+}
+
+
+
#define PIPE_CONTROL_FLUSH(ring__, addr__) \
do { \
- intel_ring_emit(ring__, GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE | \
- PIPE_CONTROL_DEPTH_STALL | 2); \
+ intel_ring_emit(ring__, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE | \
+ PIPE_CONTROL_DEPTH_STALL); \
intel_ring_emit(ring__, (addr__) | PIPE_CONTROL_GLOBAL_GTT); \
intel_ring_emit(ring__, 0); \
intel_ring_emit(ring__, 0); \
@@ -419,8 +578,9 @@
if (ret)
return ret;
- intel_ring_emit(ring, GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
- PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH);
+ intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WRITE_FLUSH |
+ PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE);
intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
intel_ring_emit(ring, seqno);
intel_ring_emit(ring, 0);
@@ -435,8 +595,9 @@
PIPE_CONTROL_FLUSH(ring, scratch_addr);
scratch_addr += 128;
PIPE_CONTROL_FLUSH(ring, scratch_addr);
- intel_ring_emit(ring, GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
- PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH |
+ intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WRITE_FLUSH |
+ PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
PIPE_CONTROL_NOTIFY);
intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
intel_ring_emit(ring, seqno);
@@ -1026,7 +1187,12 @@
.irq_get = render_ring_get_irq,
.irq_put = render_ring_put_irq,
.dispatch_execbuffer = render_ring_dispatch_execbuffer,
- .cleanup = render_ring_cleanup,
+ .cleanup = render_ring_cleanup,
+ .sync_to = render_ring_sync_to,
+ .semaphore_register = {MI_SEMAPHORE_SYNC_INVALID,
+ MI_SEMAPHORE_SYNC_RV,
+ MI_SEMAPHORE_SYNC_RB},
+ .signal_mbox = {GEN6_VRSYNC, GEN6_BRSYNC},
};
/* ring buffer for bit-stream decoder */
@@ -1050,23 +1216,23 @@
static void gen6_bsd_ring_write_tail(struct intel_ring_buffer *ring,
u32 value)
{
- drm_i915_private_t *dev_priv = ring->dev->dev_private;
+ drm_i915_private_t *dev_priv = ring->dev->dev_private;
/* Every tail move must follow the sequence below */
- I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
- GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK |
- GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE);
- I915_WRITE(GEN6_BSD_RNCID, 0x0);
+ I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
+ GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK |
+ GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE);
+ I915_WRITE(GEN6_BSD_RNCID, 0x0);
- if (wait_for((I915_READ(GEN6_BSD_SLEEP_PSMI_CONTROL) &
- GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR) == 0,
- 50))
- DRM_ERROR("timed out waiting for IDLE Indicator\n");
+ if (wait_for((I915_READ(GEN6_BSD_SLEEP_PSMI_CONTROL) &
+ GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR) == 0,
+ 50))
+ DRM_ERROR("timed out waiting for IDLE Indicator\n");
- I915_WRITE_TAIL(ring, value);
- I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
- GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK |
- GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE);
+ I915_WRITE_TAIL(ring, value);
+ I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
+ GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK |
+ GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE);
}
static int gen6_ring_flush(struct intel_ring_buffer *ring,
@@ -1094,18 +1260,18 @@
gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
u32 offset, u32 len)
{
- int ret;
+ int ret;
- ret = intel_ring_begin(ring, 2);
- if (ret)
- return ret;
+ ret = intel_ring_begin(ring, 2);
+ if (ret)
+ return ret;
- intel_ring_emit(ring, MI_BATCH_BUFFER_START | MI_BATCH_NON_SECURE_I965);
- /* bit0-7 is the length on GEN6+ */
- intel_ring_emit(ring, offset);
- intel_ring_advance(ring);
+ intel_ring_emit(ring, MI_BATCH_BUFFER_START | MI_BATCH_NON_SECURE_I965);
+ /* bit0-7 is the length on GEN6+ */
+ intel_ring_emit(ring, offset);
+ intel_ring_advance(ring);
- return 0;
+ return 0;
}
static bool
@@ -1154,6 +1320,11 @@
.irq_get = gen6_bsd_ring_get_irq,
.irq_put = gen6_bsd_ring_put_irq,
.dispatch_execbuffer = gen6_ring_dispatch_execbuffer,
+ .sync_to = gen6_bsd_ring_sync_to,
+ .semaphore_register = {MI_SEMAPHORE_SYNC_VR,
+ MI_SEMAPHORE_SYNC_INVALID,
+ MI_SEMAPHORE_SYNC_VB},
+ .signal_mbox = {GEN6_RVSYNC, GEN6_BVSYNC},
};
/* Blitter support (SandyBridge+) */
@@ -1272,19 +1443,24 @@
}
static const struct intel_ring_buffer gen6_blt_ring = {
- .name = "blt ring",
- .id = RING_BLT,
- .mmio_base = BLT_RING_BASE,
- .size = 32 * PAGE_SIZE,
- .init = blt_ring_init,
- .write_tail = ring_write_tail,
- .flush = blt_ring_flush,
- .add_request = gen6_add_request,
- .get_seqno = ring_get_seqno,
- .irq_get = blt_ring_get_irq,
- .irq_put = blt_ring_put_irq,
- .dispatch_execbuffer = gen6_ring_dispatch_execbuffer,
- .cleanup = blt_ring_cleanup,
+ .name = "blt ring",
+ .id = RING_BLT,
+ .mmio_base = BLT_RING_BASE,
+ .size = 32 * PAGE_SIZE,
+ .init = blt_ring_init,
+ .write_tail = ring_write_tail,
+ .flush = blt_ring_flush,
+ .add_request = gen6_add_request,
+ .get_seqno = ring_get_seqno,
+ .irq_get = blt_ring_get_irq,
+ .irq_put = blt_ring_put_irq,
+ .dispatch_execbuffer = gen6_ring_dispatch_execbuffer,
+ .cleanup = blt_ring_cleanup,
+ .sync_to = gen6_blt_ring_sync_to,
+ .semaphore_register = {MI_SEMAPHORE_SYNC_BR,
+ MI_SEMAPHORE_SYNC_BV,
+ MI_SEMAPHORE_SYNC_INVALID},
+ .signal_mbox = {GEN6_RBSYNC, GEN6_VBSYNC},
};
int intel_init_render_ring_buffer(struct drm_device *dev)
@@ -1295,6 +1471,7 @@
*ring = render_ring;
if (INTEL_INFO(dev)->gen >= 6) {
ring->add_request = gen6_add_request;
+ ring->flush = gen6_render_ring_flush;
ring->irq_get = gen6_render_ring_get_irq;
ring->irq_put = gen6_render_ring_put_irq;
} else if (IS_GEN5(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 39ac2b6..68281c9 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -2,10 +2,10 @@
#define _INTEL_RINGBUFFER_H_
enum {
- RCS = 0x0,
- VCS,
- BCS,
- I915_NUM_RINGS,
+ RCS = 0x0,
+ VCS,
+ BCS,
+ I915_NUM_RINGS,
};
struct intel_hw_status_page {
@@ -75,7 +75,12 @@
int (*dispatch_execbuffer)(struct intel_ring_buffer *ring,
u32 offset, u32 length);
void (*cleanup)(struct intel_ring_buffer *ring);
+ int (*sync_to)(struct intel_ring_buffer *ring,
+ struct intel_ring_buffer *to,
+ u32 seqno);
+ u32 semaphore_register[3]; /*our mbox written by others */
+ u32 signal_mbox[2]; /* mboxes this ring signals to */
/**
* List of objects currently involved in rendering from the
* ringbuffer.
@@ -180,9 +185,6 @@
void intel_ring_advance(struct intel_ring_buffer *ring);
u32 intel_ring_get_seqno(struct intel_ring_buffer *ring);
-int intel_ring_sync(struct intel_ring_buffer *ring,
- struct intel_ring_buffer *to,
- u32 seqno);
int intel_init_render_ring_buffer(struct drm_device *dev);
int intel_init_bsd_ring_buffer(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 6348c49..6db3b1c 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -43,7 +43,7 @@
#define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0)
#define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\
- SDVO_TV_MASK)
+ SDVO_TV_MASK)
#define IS_TV(c) (c->output_flag & SDVO_TV_MASK)
#define IS_TMDS(c) (c->output_flag & SDVO_TMDS_MASK)
@@ -288,117 +288,117 @@
u8 cmd;
const char *name;
} sdvo_cmd_names[] = {
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS),
- /* Add the op code for SDVO enhancements */
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HPOS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HPOS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HPOS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_VPOS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_VPOS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_VPOS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_2D),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_2D),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_2D),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SHARPNESS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SHARPNESS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SHARPNESS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DOT_CRAWL),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DOT_CRAWL),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_CHROMA_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_CHROMA_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_CHROMA_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_LUMA_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_LUMA_FILTER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_LUMA_FILTER),
+ /* Add the op code for SDVO enhancements */
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HPOS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HPOS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HPOS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_VPOS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_VPOS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_VPOS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_2D),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_2D),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_2D),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SHARPNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SHARPNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SHARPNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DOT_CRAWL),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DOT_CRAWL),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_CHROMA_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_CHROMA_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_CHROMA_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_LUMA_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_LUMA_FILTER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_LUMA_FILTER),
- /* HDMI op code */
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA),
+ /* HDMI op code */
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA),
};
#define IS_SDVOB(reg) (reg == SDVOB || reg == PCH_SDVOB)
@@ -1232,8 +1232,7 @@
intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
{
/* Is there more than one type of output? */
- int caps = intel_sdvo->caps.output_flags & 0xf;
- return caps & -caps;
+ return hweight16(intel_sdvo->caps.output_flags) > 1;
}
static struct edid *
@@ -1254,7 +1253,7 @@
}
enum drm_connector_status
-intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
{
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
enum drm_connector_status status;
@@ -1349,7 +1348,7 @@
if ((intel_sdvo_connector->output_flag & response) == 0)
ret = connector_status_disconnected;
else if (IS_TMDS(intel_sdvo_connector))
- ret = intel_sdvo_hdmi_sink_detect(connector);
+ ret = intel_sdvo_tmds_sink_detect(connector);
else {
struct edid *edid;
@@ -1896,7 +1895,7 @@
struct intel_sdvo *sdvo, u32 reg)
{
struct sdvo_device_mapping *mapping;
- u8 pin, speed;
+ u8 pin;
if (IS_SDVOB(reg))
mapping = &dev_priv->sdvo_mappings[0];
@@ -1904,18 +1903,16 @@
mapping = &dev_priv->sdvo_mappings[1];
pin = GMBUS_PORT_DPB;
- speed = GMBUS_RATE_1MHZ >> 8;
- if (mapping->initialized) {
+ if (mapping->initialized)
pin = mapping->i2c_pin;
- speed = mapping->i2c_speed;
- }
if (pin < GMBUS_NUM_PORTS) {
sdvo->i2c = &dev_priv->gmbus[pin].adapter;
- intel_gmbus_set_speed(sdvo->i2c, speed);
+ intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ);
intel_gmbus_force_bit(sdvo->i2c, true);
- } else
+ } else {
sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
+ }
}
static bool
@@ -2206,7 +2203,7 @@
bytes[0], bytes[1]);
return false;
}
- intel_sdvo->base.crtc_mask = (1 << 0) | (1 << 1);
+ intel_sdvo->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
return true;
}
@@ -2275,7 +2272,7 @@
DRM_DEBUG_KMS(#name ": max %d, default %d, current %d\n", \
data_value[0], data_value[1], response); \
} \
-} while(0)
+} while (0)
static bool
intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
@@ -2442,7 +2439,7 @@
if (IS_TV(intel_sdvo_connector))
return intel_sdvo_create_enhance_property_tv(intel_sdvo, intel_sdvo_connector, enhancements.reply);
- else if(IS_LVDS(intel_sdvo_connector))
+ else if (IS_LVDS(intel_sdvo_connector))
return intel_sdvo_create_enhance_property_lvds(intel_sdvo, intel_sdvo_connector, enhancements.reply);
else
return true;
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index 4f4e23b..4aa6f34 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -46,63 +46,63 @@
#define SDVO_OUTPUT_LAST (14)
struct intel_sdvo_caps {
- u8 vendor_id;
- u8 device_id;
- u8 device_rev_id;
- u8 sdvo_version_major;
- u8 sdvo_version_minor;
- unsigned int sdvo_inputs_mask:2;
- unsigned int smooth_scaling:1;
- unsigned int sharp_scaling:1;
- unsigned int up_scaling:1;
- unsigned int down_scaling:1;
- unsigned int stall_support:1;
- unsigned int pad:1;
- u16 output_flags;
+ u8 vendor_id;
+ u8 device_id;
+ u8 device_rev_id;
+ u8 sdvo_version_major;
+ u8 sdvo_version_minor;
+ unsigned int sdvo_inputs_mask:2;
+ unsigned int smooth_scaling:1;
+ unsigned int sharp_scaling:1;
+ unsigned int up_scaling:1;
+ unsigned int down_scaling:1;
+ unsigned int stall_support:1;
+ unsigned int pad:1;
+ u16 output_flags;
} __attribute__((packed));
/** This matches the EDID DTD structure, more or less */
struct intel_sdvo_dtd {
- struct {
- u16 clock; /**< pixel clock, in 10kHz units */
- u8 h_active; /**< lower 8 bits (pixels) */
- u8 h_blank; /**< lower 8 bits (pixels) */
- u8 h_high; /**< upper 4 bits each h_active, h_blank */
- u8 v_active; /**< lower 8 bits (lines) */
- u8 v_blank; /**< lower 8 bits (lines) */
- u8 v_high; /**< upper 4 bits each v_active, v_blank */
- } part1;
+ struct {
+ u16 clock; /**< pixel clock, in 10kHz units */
+ u8 h_active; /**< lower 8 bits (pixels) */
+ u8 h_blank; /**< lower 8 bits (pixels) */
+ u8 h_high; /**< upper 4 bits each h_active, h_blank */
+ u8 v_active; /**< lower 8 bits (lines) */
+ u8 v_blank; /**< lower 8 bits (lines) */
+ u8 v_high; /**< upper 4 bits each v_active, v_blank */
+ } part1;
- struct {
- u8 h_sync_off; /**< lower 8 bits, from hblank start */
- u8 h_sync_width; /**< lower 8 bits (pixels) */
- /** lower 4 bits each vsync offset, vsync width */
- u8 v_sync_off_width;
- /**
- * 2 high bits of hsync offset, 2 high bits of hsync width,
- * bits 4-5 of vsync offset, and 2 high bits of vsync width.
- */
- u8 sync_off_width_high;
- u8 dtd_flags;
- u8 sdvo_flags;
- /** bits 6-7 of vsync offset at bits 6-7 */
- u8 v_sync_off_high;
- u8 reserved;
- } part2;
+ struct {
+ u8 h_sync_off; /**< lower 8 bits, from hblank start */
+ u8 h_sync_width; /**< lower 8 bits (pixels) */
+ /** lower 4 bits each vsync offset, vsync width */
+ u8 v_sync_off_width;
+ /**
+ * 2 high bits of hsync offset, 2 high bits of hsync width,
+ * bits 4-5 of vsync offset, and 2 high bits of vsync width.
+ */
+ u8 sync_off_width_high;
+ u8 dtd_flags;
+ u8 sdvo_flags;
+ /** bits 6-7 of vsync offset at bits 6-7 */
+ u8 v_sync_off_high;
+ u8 reserved;
+ } part2;
} __attribute__((packed));
struct intel_sdvo_pixel_clock_range {
- u16 min; /**< pixel clock, in 10kHz units */
- u16 max; /**< pixel clock, in 10kHz units */
+ u16 min; /**< pixel clock, in 10kHz units */
+ u16 max; /**< pixel clock, in 10kHz units */
} __attribute__((packed));
struct intel_sdvo_preferred_input_timing_args {
- u16 clock;
- u16 width;
- u16 height;
- u8 interlace:1;
- u8 scaled:1;
- u8 pad:6;
+ u16 clock;
+ u16 width;
+ u16 height;
+ u8 interlace:1;
+ u8 scaled:1;
+ u8 pad:6;
} __attribute__((packed));
/* I2C registers for SDVO */
@@ -154,9 +154,9 @@
*/
#define SDVO_CMD_GET_TRAINED_INPUTS 0x03
struct intel_sdvo_get_trained_inputs_response {
- unsigned int input0_trained:1;
- unsigned int input1_trained:1;
- unsigned int pad:6;
+ unsigned int input0_trained:1;
+ unsigned int input1_trained:1;
+ unsigned int pad:6;
} __attribute__((packed));
/** Returns a struct intel_sdvo_output_flags of active outputs. */
@@ -177,7 +177,7 @@
*/
#define SDVO_CMD_GET_IN_OUT_MAP 0x06
struct intel_sdvo_in_out_map {
- u16 in0, in1;
+ u16 in0, in1;
};
/**
@@ -210,10 +210,10 @@
#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f
struct intel_sdvo_get_interrupt_event_source_response {
- u16 interrupt_status;
- unsigned int ambient_light_interrupt:1;
- unsigned int hdmi_audio_encrypt_change:1;
- unsigned int pad:6;
+ u16 interrupt_status;
+ unsigned int ambient_light_interrupt:1;
+ unsigned int hdmi_audio_encrypt_change:1;
+ unsigned int pad:6;
} __attribute__((packed));
/**
@@ -225,8 +225,8 @@
*/
#define SDVO_CMD_SET_TARGET_INPUT 0x10
struct intel_sdvo_set_target_input_args {
- unsigned int target_1:1;
- unsigned int pad:7;
+ unsigned int target_1:1;
+ unsigned int pad:7;
} __attribute__((packed));
/**
@@ -314,57 +314,57 @@
#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27
/** 6 bytes of bit flags for TV formats shared by all TV format functions */
struct intel_sdvo_tv_format {
- unsigned int ntsc_m:1;
- unsigned int ntsc_j:1;
- unsigned int ntsc_443:1;
- unsigned int pal_b:1;
- unsigned int pal_d:1;
- unsigned int pal_g:1;
- unsigned int pal_h:1;
- unsigned int pal_i:1;
+ unsigned int ntsc_m:1;
+ unsigned int ntsc_j:1;
+ unsigned int ntsc_443:1;
+ unsigned int pal_b:1;
+ unsigned int pal_d:1;
+ unsigned int pal_g:1;
+ unsigned int pal_h:1;
+ unsigned int pal_i:1;
- unsigned int pal_m:1;
- unsigned int pal_n:1;
- unsigned int pal_nc:1;
- unsigned int pal_60:1;
- unsigned int secam_b:1;
- unsigned int secam_d:1;
- unsigned int secam_g:1;
- unsigned int secam_k:1;
+ unsigned int pal_m:1;
+ unsigned int pal_n:1;
+ unsigned int pal_nc:1;
+ unsigned int pal_60:1;
+ unsigned int secam_b:1;
+ unsigned int secam_d:1;
+ unsigned int secam_g:1;
+ unsigned int secam_k:1;
- unsigned int secam_k1:1;
- unsigned int secam_l:1;
- unsigned int secam_60:1;
- unsigned int hdtv_std_smpte_240m_1080i_59:1;
- unsigned int hdtv_std_smpte_240m_1080i_60:1;
- unsigned int hdtv_std_smpte_260m_1080i_59:1;
- unsigned int hdtv_std_smpte_260m_1080i_60:1;
- unsigned int hdtv_std_smpte_274m_1080i_50:1;
+ unsigned int secam_k1:1;
+ unsigned int secam_l:1;
+ unsigned int secam_60:1;
+ unsigned int hdtv_std_smpte_240m_1080i_59:1;
+ unsigned int hdtv_std_smpte_240m_1080i_60:1;
+ unsigned int hdtv_std_smpte_260m_1080i_59:1;
+ unsigned int hdtv_std_smpte_260m_1080i_60:1;
+ unsigned int hdtv_std_smpte_274m_1080i_50:1;
- unsigned int hdtv_std_smpte_274m_1080i_59:1;
- unsigned int hdtv_std_smpte_274m_1080i_60:1;
- unsigned int hdtv_std_smpte_274m_1080p_23:1;
- unsigned int hdtv_std_smpte_274m_1080p_24:1;
- unsigned int hdtv_std_smpte_274m_1080p_25:1;
- unsigned int hdtv_std_smpte_274m_1080p_29:1;
- unsigned int hdtv_std_smpte_274m_1080p_30:1;
- unsigned int hdtv_std_smpte_274m_1080p_50:1;
+ unsigned int hdtv_std_smpte_274m_1080i_59:1;
+ unsigned int hdtv_std_smpte_274m_1080i_60:1;
+ unsigned int hdtv_std_smpte_274m_1080p_23:1;
+ unsigned int hdtv_std_smpte_274m_1080p_24:1;
+ unsigned int hdtv_std_smpte_274m_1080p_25:1;
+ unsigned int hdtv_std_smpte_274m_1080p_29:1;
+ unsigned int hdtv_std_smpte_274m_1080p_30:1;
+ unsigned int hdtv_std_smpte_274m_1080p_50:1;
- unsigned int hdtv_std_smpte_274m_1080p_59:1;
- unsigned int hdtv_std_smpte_274m_1080p_60:1;
- unsigned int hdtv_std_smpte_295m_1080i_50:1;
- unsigned int hdtv_std_smpte_295m_1080p_50:1;
- unsigned int hdtv_std_smpte_296m_720p_59:1;
- unsigned int hdtv_std_smpte_296m_720p_60:1;
- unsigned int hdtv_std_smpte_296m_720p_50:1;
- unsigned int hdtv_std_smpte_293m_480p_59:1;
+ unsigned int hdtv_std_smpte_274m_1080p_59:1;
+ unsigned int hdtv_std_smpte_274m_1080p_60:1;
+ unsigned int hdtv_std_smpte_295m_1080i_50:1;
+ unsigned int hdtv_std_smpte_295m_1080p_50:1;
+ unsigned int hdtv_std_smpte_296m_720p_59:1;
+ unsigned int hdtv_std_smpte_296m_720p_60:1;
+ unsigned int hdtv_std_smpte_296m_720p_50:1;
+ unsigned int hdtv_std_smpte_293m_480p_59:1;
- unsigned int hdtv_std_smpte_170m_480i_59:1;
- unsigned int hdtv_std_iturbt601_576i_50:1;
- unsigned int hdtv_std_iturbt601_576p_50:1;
- unsigned int hdtv_std_eia_7702a_480i_60:1;
- unsigned int hdtv_std_eia_7702a_480p_60:1;
- unsigned int pad:3;
+ unsigned int hdtv_std_smpte_170m_480i_59:1;
+ unsigned int hdtv_std_iturbt601_576i_50:1;
+ unsigned int hdtv_std_iturbt601_576p_50:1;
+ unsigned int hdtv_std_eia_7702a_480i_60:1;
+ unsigned int hdtv_std_eia_7702a_480p_60:1;
+ unsigned int pad:3;
} __attribute__((packed));
#define SDVO_CMD_GET_TV_FORMAT 0x28
@@ -374,53 +374,53 @@
/** Returns the resolutiosn that can be used with the given TV format */
#define SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT 0x83
struct intel_sdvo_sdtv_resolution_request {
- unsigned int ntsc_m:1;
- unsigned int ntsc_j:1;
- unsigned int ntsc_443:1;
- unsigned int pal_b:1;
- unsigned int pal_d:1;
- unsigned int pal_g:1;
- unsigned int pal_h:1;
- unsigned int pal_i:1;
+ unsigned int ntsc_m:1;
+ unsigned int ntsc_j:1;
+ unsigned int ntsc_443:1;
+ unsigned int pal_b:1;
+ unsigned int pal_d:1;
+ unsigned int pal_g:1;
+ unsigned int pal_h:1;
+ unsigned int pal_i:1;
- unsigned int pal_m:1;
- unsigned int pal_n:1;
- unsigned int pal_nc:1;
- unsigned int pal_60:1;
- unsigned int secam_b:1;
- unsigned int secam_d:1;
- unsigned int secam_g:1;
- unsigned int secam_k:1;
+ unsigned int pal_m:1;
+ unsigned int pal_n:1;
+ unsigned int pal_nc:1;
+ unsigned int pal_60:1;
+ unsigned int secam_b:1;
+ unsigned int secam_d:1;
+ unsigned int secam_g:1;
+ unsigned int secam_k:1;
- unsigned int secam_k1:1;
- unsigned int secam_l:1;
- unsigned int secam_60:1;
- unsigned int pad:5;
+ unsigned int secam_k1:1;
+ unsigned int secam_l:1;
+ unsigned int secam_60:1;
+ unsigned int pad:5;
} __attribute__((packed));
struct intel_sdvo_sdtv_resolution_reply {
- unsigned int res_320x200:1;
- unsigned int res_320x240:1;
- unsigned int res_400x300:1;
- unsigned int res_640x350:1;
- unsigned int res_640x400:1;
- unsigned int res_640x480:1;
- unsigned int res_704x480:1;
- unsigned int res_704x576:1;
+ unsigned int res_320x200:1;
+ unsigned int res_320x240:1;
+ unsigned int res_400x300:1;
+ unsigned int res_640x350:1;
+ unsigned int res_640x400:1;
+ unsigned int res_640x480:1;
+ unsigned int res_704x480:1;
+ unsigned int res_704x576:1;
- unsigned int res_720x350:1;
- unsigned int res_720x400:1;
- unsigned int res_720x480:1;
- unsigned int res_720x540:1;
- unsigned int res_720x576:1;
- unsigned int res_768x576:1;
- unsigned int res_800x600:1;
- unsigned int res_832x624:1;
+ unsigned int res_720x350:1;
+ unsigned int res_720x400:1;
+ unsigned int res_720x480:1;
+ unsigned int res_720x540:1;
+ unsigned int res_720x576:1;
+ unsigned int res_768x576:1;
+ unsigned int res_800x600:1;
+ unsigned int res_832x624:1;
- unsigned int res_920x766:1;
- unsigned int res_1024x768:1;
- unsigned int res_1280x1024:1;
- unsigned int pad:5;
+ unsigned int res_920x766:1;
+ unsigned int res_1024x768:1;
+ unsigned int res_1280x1024:1;
+ unsigned int pad:5;
} __attribute__((packed));
/* Get supported resolution with squire pixel aspect ratio that can be
@@ -428,90 +428,90 @@
#define SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT 0x85
struct intel_sdvo_hdtv_resolution_request {
- unsigned int hdtv_std_smpte_240m_1080i_59:1;
- unsigned int hdtv_std_smpte_240m_1080i_60:1;
- unsigned int hdtv_std_smpte_260m_1080i_59:1;
- unsigned int hdtv_std_smpte_260m_1080i_60:1;
- unsigned int hdtv_std_smpte_274m_1080i_50:1;
- unsigned int hdtv_std_smpte_274m_1080i_59:1;
- unsigned int hdtv_std_smpte_274m_1080i_60:1;
- unsigned int hdtv_std_smpte_274m_1080p_23:1;
+ unsigned int hdtv_std_smpte_240m_1080i_59:1;
+ unsigned int hdtv_std_smpte_240m_1080i_60:1;
+ unsigned int hdtv_std_smpte_260m_1080i_59:1;
+ unsigned int hdtv_std_smpte_260m_1080i_60:1;
+ unsigned int hdtv_std_smpte_274m_1080i_50:1;
+ unsigned int hdtv_std_smpte_274m_1080i_59:1;
+ unsigned int hdtv_std_smpte_274m_1080i_60:1;
+ unsigned int hdtv_std_smpte_274m_1080p_23:1;
- unsigned int hdtv_std_smpte_274m_1080p_24:1;
- unsigned int hdtv_std_smpte_274m_1080p_25:1;
- unsigned int hdtv_std_smpte_274m_1080p_29:1;
- unsigned int hdtv_std_smpte_274m_1080p_30:1;
- unsigned int hdtv_std_smpte_274m_1080p_50:1;
- unsigned int hdtv_std_smpte_274m_1080p_59:1;
- unsigned int hdtv_std_smpte_274m_1080p_60:1;
- unsigned int hdtv_std_smpte_295m_1080i_50:1;
+ unsigned int hdtv_std_smpte_274m_1080p_24:1;
+ unsigned int hdtv_std_smpte_274m_1080p_25:1;
+ unsigned int hdtv_std_smpte_274m_1080p_29:1;
+ unsigned int hdtv_std_smpte_274m_1080p_30:1;
+ unsigned int hdtv_std_smpte_274m_1080p_50:1;
+ unsigned int hdtv_std_smpte_274m_1080p_59:1;
+ unsigned int hdtv_std_smpte_274m_1080p_60:1;
+ unsigned int hdtv_std_smpte_295m_1080i_50:1;
- unsigned int hdtv_std_smpte_295m_1080p_50:1;
- unsigned int hdtv_std_smpte_296m_720p_59:1;
- unsigned int hdtv_std_smpte_296m_720p_60:1;
- unsigned int hdtv_std_smpte_296m_720p_50:1;
- unsigned int hdtv_std_smpte_293m_480p_59:1;
- unsigned int hdtv_std_smpte_170m_480i_59:1;
- unsigned int hdtv_std_iturbt601_576i_50:1;
- unsigned int hdtv_std_iturbt601_576p_50:1;
+ unsigned int hdtv_std_smpte_295m_1080p_50:1;
+ unsigned int hdtv_std_smpte_296m_720p_59:1;
+ unsigned int hdtv_std_smpte_296m_720p_60:1;
+ unsigned int hdtv_std_smpte_296m_720p_50:1;
+ unsigned int hdtv_std_smpte_293m_480p_59:1;
+ unsigned int hdtv_std_smpte_170m_480i_59:1;
+ unsigned int hdtv_std_iturbt601_576i_50:1;
+ unsigned int hdtv_std_iturbt601_576p_50:1;
- unsigned int hdtv_std_eia_7702a_480i_60:1;
- unsigned int hdtv_std_eia_7702a_480p_60:1;
- unsigned int pad:6;
+ unsigned int hdtv_std_eia_7702a_480i_60:1;
+ unsigned int hdtv_std_eia_7702a_480p_60:1;
+ unsigned int pad:6;
} __attribute__((packed));
struct intel_sdvo_hdtv_resolution_reply {
- unsigned int res_640x480:1;
- unsigned int res_800x600:1;
- unsigned int res_1024x768:1;
- unsigned int res_1280x960:1;
- unsigned int res_1400x1050:1;
- unsigned int res_1600x1200:1;
- unsigned int res_1920x1440:1;
- unsigned int res_2048x1536:1;
+ unsigned int res_640x480:1;
+ unsigned int res_800x600:1;
+ unsigned int res_1024x768:1;
+ unsigned int res_1280x960:1;
+ unsigned int res_1400x1050:1;
+ unsigned int res_1600x1200:1;
+ unsigned int res_1920x1440:1;
+ unsigned int res_2048x1536:1;
- unsigned int res_2560x1920:1;
- unsigned int res_3200x2400:1;
- unsigned int res_3840x2880:1;
- unsigned int pad1:5;
+ unsigned int res_2560x1920:1;
+ unsigned int res_3200x2400:1;
+ unsigned int res_3840x2880:1;
+ unsigned int pad1:5;
- unsigned int res_848x480:1;
- unsigned int res_1064x600:1;
- unsigned int res_1280x720:1;
- unsigned int res_1360x768:1;
- unsigned int res_1704x960:1;
- unsigned int res_1864x1050:1;
- unsigned int res_1920x1080:1;
- unsigned int res_2128x1200:1;
+ unsigned int res_848x480:1;
+ unsigned int res_1064x600:1;
+ unsigned int res_1280x720:1;
+ unsigned int res_1360x768:1;
+ unsigned int res_1704x960:1;
+ unsigned int res_1864x1050:1;
+ unsigned int res_1920x1080:1;
+ unsigned int res_2128x1200:1;
- unsigned int res_2560x1400:1;
- unsigned int res_2728x1536:1;
- unsigned int res_3408x1920:1;
- unsigned int res_4264x2400:1;
- unsigned int res_5120x2880:1;
- unsigned int pad2:3;
+ unsigned int res_2560x1400:1;
+ unsigned int res_2728x1536:1;
+ unsigned int res_3408x1920:1;
+ unsigned int res_4264x2400:1;
+ unsigned int res_5120x2880:1;
+ unsigned int pad2:3;
- unsigned int res_768x480:1;
- unsigned int res_960x600:1;
- unsigned int res_1152x720:1;
- unsigned int res_1124x768:1;
- unsigned int res_1536x960:1;
- unsigned int res_1680x1050:1;
- unsigned int res_1728x1080:1;
- unsigned int res_1920x1200:1;
+ unsigned int res_768x480:1;
+ unsigned int res_960x600:1;
+ unsigned int res_1152x720:1;
+ unsigned int res_1124x768:1;
+ unsigned int res_1536x960:1;
+ unsigned int res_1680x1050:1;
+ unsigned int res_1728x1080:1;
+ unsigned int res_1920x1200:1;
- unsigned int res_2304x1440:1;
- unsigned int res_2456x1536:1;
- unsigned int res_3072x1920:1;
- unsigned int res_3840x2400:1;
- unsigned int res_4608x2880:1;
- unsigned int pad3:3;
+ unsigned int res_2304x1440:1;
+ unsigned int res_2456x1536:1;
+ unsigned int res_3072x1920:1;
+ unsigned int res_3840x2400:1;
+ unsigned int res_4608x2880:1;
+ unsigned int pad3:3;
- unsigned int res_1280x1024:1;
- unsigned int pad4:7;
+ unsigned int res_1280x1024:1;
+ unsigned int pad4:7;
- unsigned int res_1280x768:1;
- unsigned int pad5:7;
+ unsigned int res_1280x768:1;
+ unsigned int pad5:7;
} __attribute__((packed));
/* Get supported power state returns info for encoder and monitor, rely on
@@ -539,25 +539,25 @@
* The high fields are bits 8:9 of the 10-bit values.
*/
struct sdvo_panel_power_sequencing {
- u8 t0;
- u8 t1;
- u8 t2;
- u8 t3;
- u8 t4;
+ u8 t0;
+ u8 t1;
+ u8 t2;
+ u8 t3;
+ u8 t4;
- unsigned int t0_high:2;
- unsigned int t1_high:2;
- unsigned int t2_high:2;
- unsigned int t3_high:2;
+ unsigned int t0_high:2;
+ unsigned int t1_high:2;
+ unsigned int t2_high:2;
+ unsigned int t3_high:2;
- unsigned int t4_high:2;
- unsigned int pad:6;
+ unsigned int t4_high:2;
+ unsigned int pad:6;
} __attribute__((packed));
#define SDVO_CMD_GET_MAX_BACKLIGHT_LEVEL 0x30
struct sdvo_max_backlight_reply {
- u8 max_value;
- u8 default_value;
+ u8 max_value;
+ u8 default_value;
} __attribute__((packed));
#define SDVO_CMD_GET_BACKLIGHT_LEVEL 0x31
@@ -565,16 +565,16 @@
#define SDVO_CMD_GET_AMBIENT_LIGHT 0x33
struct sdvo_get_ambient_light_reply {
- u16 trip_low;
- u16 trip_high;
- u16 value;
+ u16 trip_low;
+ u16 trip_high;
+ u16 value;
} __attribute__((packed));
#define SDVO_CMD_SET_AMBIENT_LIGHT 0x34
struct sdvo_set_ambient_light_reply {
- u16 trip_low;
- u16 trip_high;
- unsigned int enable:1;
- unsigned int pad:7;
+ u16 trip_low;
+ u16 trip_high;
+ unsigned int enable:1;
+ unsigned int pad:7;
} __attribute__((packed));
/* Set display power state */
@@ -586,23 +586,23 @@
#define SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS 0x84
struct intel_sdvo_enhancements_reply {
- unsigned int flicker_filter:1;
- unsigned int flicker_filter_adaptive:1;
- unsigned int flicker_filter_2d:1;
- unsigned int saturation:1;
- unsigned int hue:1;
- unsigned int brightness:1;
- unsigned int contrast:1;
- unsigned int overscan_h:1;
+ unsigned int flicker_filter:1;
+ unsigned int flicker_filter_adaptive:1;
+ unsigned int flicker_filter_2d:1;
+ unsigned int saturation:1;
+ unsigned int hue:1;
+ unsigned int brightness:1;
+ unsigned int contrast:1;
+ unsigned int overscan_h:1;
- unsigned int overscan_v:1;
- unsigned int hpos:1;
- unsigned int vpos:1;
- unsigned int sharpness:1;
- unsigned int dot_crawl:1;
- unsigned int dither:1;
- unsigned int tv_chroma_filter:1;
- unsigned int tv_luma_filter:1;
+ unsigned int overscan_v:1;
+ unsigned int hpos:1;
+ unsigned int vpos:1;
+ unsigned int sharpness:1;
+ unsigned int dot_crawl:1;
+ unsigned int dither:1;
+ unsigned int tv_chroma_filter:1;
+ unsigned int tv_luma_filter:1;
} __attribute__((packed));
/* Picture enhancement limits below are dependent on the current TV format,
@@ -623,8 +623,8 @@
#define SDVO_CMD_GET_MAX_TV_CHROMA_FILTER 0x74
#define SDVO_CMD_GET_MAX_TV_LUMA_FILTER 0x77
struct intel_sdvo_enhancement_limits_reply {
- u16 max_value;
- u16 default_value;
+ u16 max_value;
+ u16 default_value;
} __attribute__((packed));
#define SDVO_CMD_GET_LVDS_PANEL_INFORMATION 0x7f
@@ -665,8 +665,8 @@
#define SDVO_CMD_GET_TV_LUMA_FILTER 0x78
#define SDVO_CMD_SET_TV_LUMA_FILTER 0x79
struct intel_sdvo_enhancements_arg {
- u16 value;
-}__attribute__((packed));
+ u16 value;
+} __attribute__((packed));
#define SDVO_CMD_GET_DOT_CRAWL 0x70
#define SDVO_CMD_SET_DOT_CRAWL 0x71
@@ -717,7 +717,7 @@
#define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c
#define SDVO_NEED_TO_STALL (1 << 7)
-struct intel_sdvo_encode{
- u8 dvi_rev;
- u8 hdmi_rev;
+struct intel_sdvo_encode {
+ u8 dvi_rev;
+ u8 hdmi_rev;
} __attribute__ ((packed));
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 210d570..f3c6a9a 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -194,10 +194,10 @@
*
* if (f >= 1) {
* exp = 0x7;
- * mant = 1 << 8;
+ * mant = 1 << 8;
* } else {
* for (exp = 0; exp < 3 && f < 0.5; exp++)
- * f *= 2.0;
+ * f *= 2.0;
* mant = (f * (1 << 9) + 0.5);
* if (mant >= (1 << 9))
* mant = (1 << 9) - 1;
@@ -430,7 +430,7 @@
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
.vsync_len = 6,
- .veq_ena = true, .veq_start_f1 = 0,
+ .veq_ena = true, .veq_start_f1 = 0,
.veq_start_f2 = 1, .veq_len = 18,
.vi_end_f1 = 20, .vi_end_f2 = 21,
@@ -472,7 +472,7 @@
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
.vsync_len = 6,
- .veq_ena = true, .veq_start_f1 = 0,
+ .veq_ena = true, .veq_start_f1 = 0,
.veq_start_f2 = 1, .veq_len = 18,
.vi_end_f1 = 20, .vi_end_f2 = 21,
@@ -515,7 +515,7 @@
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
.vsync_len = 6,
- .veq_ena = true, .veq_start_f1 = 0,
+ .veq_ena = true, .veq_start_f1 = 0,
.veq_start_f2 = 1, .veq_len = 18,
.vi_end_f1 = 20, .vi_end_f2 = 21,
@@ -558,7 +558,7 @@
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
.vsync_len = 6,
- .veq_ena = true, .veq_start_f1 = 0,
+ .veq_ena = true, .veq_start_f1 = 0,
.veq_start_f2 = 1, .veq_len = 18,
.vi_end_f1 = 20, .vi_end_f2 = 21,
@@ -602,14 +602,14 @@
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
.vsync_len = 6,
- .veq_ena = true, .veq_start_f1 = 0,
+ .veq_ena = true, .veq_start_f1 = 0,
.veq_start_f2 = 1, .veq_len = 18,
.vi_end_f1 = 24, .vi_end_f2 = 25,
.nbr_end = 286,
.burst_ena = true,
- .hburst_start = 73, .hburst_len = 34,
+ .hburst_start = 73, .hburst_len = 34,
.vburst_start_f1 = 8, .vburst_end_f1 = 285,
.vburst_start_f2 = 8, .vburst_end_f2 = 286,
.vburst_start_f3 = 9, .vburst_end_f3 = 286,
@@ -646,7 +646,7 @@
.vsync_start_f1 = 5, .vsync_start_f2 = 6,
.vsync_len = 5,
- .veq_ena = true, .veq_start_f1 = 0,
+ .veq_ena = true, .veq_start_f1 = 0,
.veq_start_f2 = 1, .veq_len = 15,
.vi_end_f1 = 24, .vi_end_f2 = 25,
@@ -675,7 +675,7 @@
},
{
.name = "480p@59.94Hz",
- .clock = 107520,
+ .clock = 107520,
.refresh = 59940,
.oversample = TV_OVERSAMPLE_4X,
.component_only = 1,
@@ -683,7 +683,7 @@
.hsync_end = 64, .hblank_end = 122,
.hblank_start = 842, .htotal = 857,
- .progressive = true,.trilevel_sync = false,
+ .progressive = true, .trilevel_sync = false,
.vsync_start_f1 = 12, .vsync_start_f2 = 12,
.vsync_len = 12,
@@ -699,7 +699,7 @@
},
{
.name = "480p@60Hz",
- .clock = 107520,
+ .clock = 107520,
.refresh = 60000,
.oversample = TV_OVERSAMPLE_4X,
.component_only = 1,
@@ -707,7 +707,7 @@
.hsync_end = 64, .hblank_end = 122,
.hblank_start = 842, .htotal = 856,
- .progressive = true,.trilevel_sync = false,
+ .progressive = true, .trilevel_sync = false,
.vsync_start_f1 = 12, .vsync_start_f2 = 12,
.vsync_len = 12,
@@ -723,7 +723,7 @@
},
{
.name = "576p",
- .clock = 107520,
+ .clock = 107520,
.refresh = 50000,
.oversample = TV_OVERSAMPLE_4X,
.component_only = 1,
@@ -755,7 +755,7 @@
.hsync_end = 80, .hblank_end = 300,
.hblank_start = 1580, .htotal = 1649,
- .progressive = true, .trilevel_sync = true,
+ .progressive = true, .trilevel_sync = true,
.vsync_start_f1 = 10, .vsync_start_f2 = 10,
.vsync_len = 10,
@@ -779,7 +779,7 @@
.hsync_end = 80, .hblank_end = 300,
.hblank_start = 1580, .htotal = 1651,
- .progressive = true, .trilevel_sync = true,
+ .progressive = true, .trilevel_sync = true,
.vsync_start_f1 = 10, .vsync_start_f2 = 10,
.vsync_len = 10,
@@ -803,7 +803,7 @@
.hsync_end = 80, .hblank_end = 300,
.hblank_start = 1580, .htotal = 1979,
- .progressive = true, .trilevel_sync = true,
+ .progressive = true, .trilevel_sync = true,
.vsync_start_f1 = 10, .vsync_start_f2 = 10,
.vsync_len = 10,
@@ -828,12 +828,12 @@
.hsync_end = 88, .hblank_end = 235,
.hblank_start = 2155, .htotal = 2639,
- .progressive = false, .trilevel_sync = true,
+ .progressive = false, .trilevel_sync = true,
.vsync_start_f1 = 4, .vsync_start_f2 = 5,
.vsync_len = 10,
- .veq_ena = true, .veq_start_f1 = 4,
+ .veq_ena = true, .veq_start_f1 = 4,
.veq_start_f2 = 4, .veq_len = 10,
@@ -854,12 +854,12 @@
.hsync_end = 88, .hblank_end = 235,
.hblank_start = 2155, .htotal = 2199,
- .progressive = false, .trilevel_sync = true,
+ .progressive = false, .trilevel_sync = true,
.vsync_start_f1 = 4, .vsync_start_f2 = 5,
.vsync_len = 10,
- .veq_ena = true, .veq_start_f1 = 4,
+ .veq_ena = true, .veq_start_f1 = 4,
.veq_start_f2 = 4, .veq_len = 10,
@@ -880,16 +880,16 @@
.hsync_end = 88, .hblank_end = 235,
.hblank_start = 2155, .htotal = 2201,
- .progressive = false, .trilevel_sync = true,
+ .progressive = false, .trilevel_sync = true,
.vsync_start_f1 = 4, .vsync_start_f2 = 5,
.vsync_len = 10,
.veq_ena = true, .veq_start_f1 = 4,
- .veq_start_f2 = 4, .veq_len = 10,
+ .veq_start_f2 = 4, .veq_len = 10,
- .vi_end_f1 = 21, .vi_end_f2 = 22,
+ .vi_end_f1 = 21, .vi_end_f2 = 22,
.nbr_end = 539,
.burst_ena = false,
@@ -916,7 +916,7 @@
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- switch(mode) {
+ switch (mode) {
case DRM_MODE_DPMS_ON:
I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE);
break;
@@ -933,7 +933,7 @@
{
int i;
- for (i = 0; i < sizeof(tv_modes) / sizeof (tv_modes[0]); i++) {
+ for (i = 0; i < sizeof(tv_modes) / sizeof(tv_modes[0]); i++) {
const struct tv_mode *tv_mode = &tv_modes[i];
if (!strcmp(tv_format, tv_mode->name))
@@ -1128,7 +1128,7 @@
if (color_conversion) {
I915_WRITE(TV_CSC_Y, (color_conversion->ry << 16) |
color_conversion->gy);
- I915_WRITE(TV_CSC_Y2,(color_conversion->by << 16) |
+ I915_WRITE(TV_CSC_Y2, (color_conversion->by << 16) |
color_conversion->ay);
I915_WRITE(TV_CSC_U, (color_conversion->ru << 16) |
color_conversion->gu);
@@ -1232,7 +1232,7 @@
* \return false if TV is disconnected.
*/
static int
-intel_tv_detect_type (struct intel_tv *intel_tv,
+intel_tv_detect_type(struct intel_tv *intel_tv,
struct drm_connector *connector)
{
struct drm_encoder *encoder = &intel_tv->base.base;
@@ -1486,7 +1486,7 @@
}
static void
-intel_tv_destroy (struct drm_connector *connector)
+intel_tv_destroy(struct drm_connector *connector)
{
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile
index 0583677..35ef5b1 100644
--- a/drivers/gpu/drm/nouveau/Makefile
+++ b/drivers/gpu/drm/nouveau/Makefile
@@ -21,16 +21,17 @@
nv40_grctx.o nv50_grctx.o nvc0_grctx.o \
nv84_crypt.o \
nva3_copy.o nvc0_copy.o \
- nv40_mpeg.o nv50_mpeg.o \
+ nv31_mpeg.o nv50_mpeg.o \
nv04_instmem.o nv50_instmem.o nvc0_instmem.o \
- nv50_evo.o nv50_crtc.o nv50_dac.o nv50_sor.o \
- nv50_cursor.o nv50_display.o \
nv04_dac.o nv04_dfp.o nv04_tv.o nv17_tv.o nv17_tv_modes.o \
nv04_crtc.o nv04_display.o nv04_cursor.o \
+ nv50_evo.o nv50_crtc.o nv50_dac.o nv50_sor.o \
+ nv50_cursor.o nv50_display.o \
+ nvd0_display.o \
nv04_fbcon.o nv50_fbcon.o nvc0_fbcon.o \
nv10_gpio.o nv50_gpio.o \
nv50_calc.o \
- nv04_pm.o nv50_pm.o nva3_pm.o \
+ nv04_pm.o nv40_pm.o nv50_pm.o nva3_pm.o nvc0_pm.o \
nv50_vram.o nvc0_vram.o \
nv50_vm.o nvc0_vm.o
diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 00a55df..fa22b28 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -37,8 +37,10 @@
#include "nouveau_drv.h"
#include "nouveau_drm.h"
#include "nouveau_reg.h"
+#include "nouveau_encoder.h"
-static int nv40_get_intensity(struct backlight_device *bd)
+static int
+nv40_get_intensity(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
int val = (nv_rd32(dev, NV40_PMC_BACKLIGHT) & NV40_PMC_BACKLIGHT_MASK)
@@ -47,7 +49,8 @@
return val;
}
-static int nv40_set_intensity(struct backlight_device *bd)
+static int
+nv40_set_intensity(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
int val = bd->props.brightness;
@@ -65,30 +68,8 @@
.update_status = nv40_set_intensity,
};
-static int nv50_get_intensity(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(bd);
-
- return nv_rd32(dev, NV50_PDISPLAY_SOR_BACKLIGHT);
-}
-
-static int nv50_set_intensity(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(bd);
- int val = bd->props.brightness;
-
- nv_wr32(dev, NV50_PDISPLAY_SOR_BACKLIGHT,
- val | NV50_PDISPLAY_SOR_BACKLIGHT_ENABLE);
- return 0;
-}
-
-static const struct backlight_ops nv50_bl_ops = {
- .options = BL_CORE_SUSPENDRESUME,
- .get_brightness = nv50_get_intensity,
- .update_status = nv50_set_intensity,
-};
-
-static int nouveau_nv40_backlight_init(struct drm_connector *connector)
+static int
+nv40_backlight_init(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -113,34 +94,129 @@
return 0;
}
-static int nouveau_nv50_backlight_init(struct drm_connector *connector)
+static int
+nv50_get_intensity(struct backlight_device *bd)
+{
+ struct nouveau_encoder *nv_encoder = bl_get_data(bd);
+ struct drm_device *dev = nv_encoder->base.base.dev;
+ int or = nv_encoder->or;
+ u32 div = 1025;
+ u32 val;
+
+ val = nv_rd32(dev, NV50_PDISP_SOR_PWM_CTL(or));
+ val &= NV50_PDISP_SOR_PWM_CTL_VAL;
+ return ((val * 100) + (div / 2)) / div;
+}
+
+static int
+nv50_set_intensity(struct backlight_device *bd)
+{
+ struct nouveau_encoder *nv_encoder = bl_get_data(bd);
+ struct drm_device *dev = nv_encoder->base.base.dev;
+ int or = nv_encoder->or;
+ u32 div = 1025;
+ u32 val = (bd->props.brightness * div) / 100;
+
+ nv_wr32(dev, NV50_PDISP_SOR_PWM_CTL(or),
+ NV50_PDISP_SOR_PWM_CTL_NEW | val);
+ return 0;
+}
+
+static const struct backlight_ops nv50_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .get_brightness = nv50_get_intensity,
+ .update_status = nv50_set_intensity,
+};
+
+static int
+nva3_get_intensity(struct backlight_device *bd)
+{
+ struct nouveau_encoder *nv_encoder = bl_get_data(bd);
+ struct drm_device *dev = nv_encoder->base.base.dev;
+ int or = nv_encoder->or;
+ u32 div, val;
+
+ div = nv_rd32(dev, NV50_PDISP_SOR_PWM_DIV(or));
+ val = nv_rd32(dev, NV50_PDISP_SOR_PWM_CTL(or));
+ val &= NVA3_PDISP_SOR_PWM_CTL_VAL;
+ if (div && div >= val)
+ return ((val * 100) + (div / 2)) / div;
+
+ return 100;
+}
+
+static int
+nva3_set_intensity(struct backlight_device *bd)
+{
+ struct nouveau_encoder *nv_encoder = bl_get_data(bd);
+ struct drm_device *dev = nv_encoder->base.base.dev;
+ int or = nv_encoder->or;
+ u32 div, val;
+
+ div = nv_rd32(dev, NV50_PDISP_SOR_PWM_DIV(or));
+ val = (bd->props.brightness * div) / 100;
+ if (div) {
+ nv_wr32(dev, NV50_PDISP_SOR_PWM_CTL(or), val |
+ NV50_PDISP_SOR_PWM_CTL_NEW |
+ NVA3_PDISP_SOR_PWM_CTL_UNK);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static const struct backlight_ops nva3_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .get_brightness = nva3_get_intensity,
+ .update_status = nva3_set_intensity,
+};
+
+static int
+nv50_backlight_init(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_encoder *nv_encoder;
struct backlight_properties props;
struct backlight_device *bd;
+ const struct backlight_ops *ops;
- if (!nv_rd32(dev, NV50_PDISPLAY_SOR_BACKLIGHT))
+ nv_encoder = find_encoder(connector, OUTPUT_LVDS);
+ if (!nv_encoder) {
+ nv_encoder = find_encoder(connector, OUTPUT_DP);
+ if (!nv_encoder)
+ return -ENODEV;
+ }
+
+ if (!nv_rd32(dev, NV50_PDISP_SOR_PWM_CTL(nv_encoder->or)))
return 0;
+ if (dev_priv->chipset <= 0xa0 ||
+ dev_priv->chipset == 0xaa ||
+ dev_priv->chipset == 0xac)
+ ops = &nv50_bl_ops;
+ else
+ ops = &nva3_bl_ops;
+
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
- props.max_brightness = 1025;
- bd = backlight_device_register("nv_backlight", &connector->kdev, dev,
- &nv50_bl_ops, &props);
+ props.max_brightness = 100;
+ bd = backlight_device_register("nv_backlight", &connector->kdev,
+ nv_encoder, ops, &props);
if (IS_ERR(bd))
return PTR_ERR(bd);
dev_priv->backlight = bd;
- bd->props.brightness = nv50_get_intensity(bd);
+ bd->props.brightness = bd->ops->get_brightness(bd);
backlight_update_status(bd);
return 0;
}
-int nouveau_backlight_init(struct drm_connector *connector)
+int
+nouveau_backlight_init(struct drm_device *dev)
{
- struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct drm_connector *connector;
#ifdef CONFIG_ACPI
if (acpi_video_backlight_support()) {
@@ -150,21 +226,28 @@
}
#endif
- switch (dev_priv->card_type) {
- case NV_40:
- return nouveau_nv40_backlight_init(connector);
- case NV_50:
- return nouveau_nv50_backlight_init(connector);
- default:
- break;
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS &&
+ connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+ continue;
+
+ switch (dev_priv->card_type) {
+ case NV_40:
+ return nv40_backlight_init(connector);
+ case NV_50:
+ return nv50_backlight_init(connector);
+ default:
+ break;
+ }
}
+
return 0;
}
-void nouveau_backlight_exit(struct drm_connector *connector)
+void
+nouveau_backlight_exit(struct drm_device *dev)
{
- struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
if (dev_priv->backlight) {
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index b311fab..032a820 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -296,6 +296,11 @@
if (dev_priv->card_type < NV_50)
return reg;
+ if (reg & 0x80000000) {
+ BUG_ON(bios->display.crtc < 0);
+ reg += bios->display.crtc * 0x800;
+ }
+
if (reg & 0x40000000) {
BUG_ON(!dcbent);
@@ -304,7 +309,7 @@
reg += 0x00000080;
}
- reg &= ~0x60000000;
+ reg &= ~0xe0000000;
return reg;
}
@@ -1174,22 +1179,19 @@
*
*/
- struct bit_displayport_encoder_table *dpe = NULL;
struct dcb_entry *dcb = bios->display.output;
struct drm_device *dev = bios->dev;
uint8_t cond = bios->data[offset + 1];
- int dummy;
+ uint8_t *table, *entry;
BIOSLOG(bios, "0x%04X: subop 0x%02X\n", offset, cond);
if (!iexec->execute)
return 3;
- dpe = nouveau_bios_dp_table(dev, dcb, &dummy);
- if (!dpe) {
- NV_ERROR(dev, "0x%04X: INIT_3A: no encoder table!!\n", offset);
+ table = nouveau_dp_bios_data(dev, dcb, &entry);
+ if (!table)
return 3;
- }
switch (cond) {
case 0:
@@ -1203,7 +1205,7 @@
break;
case 1:
case 2:
- if (!(dpe->unknown & cond))
+ if (!(entry[5] & cond))
iexec->execute = false;
break;
case 5:
@@ -3221,6 +3223,49 @@
return 1;
}
+static void
+init_gpio_unknv50(struct nvbios *bios, struct dcb_gpio_entry *gpio)
+{
+ const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
+ u32 r, s, v;
+
+ /* Not a clue, needs de-magicing */
+ r = nv50_gpio_ctl[gpio->line >> 4];
+ s = (gpio->line & 0x0f);
+ v = bios_rd32(bios, r) & ~(0x00010001 << s);
+ switch ((gpio->entry & 0x06000000) >> 25) {
+ case 1:
+ v |= (0x00000001 << s);
+ break;
+ case 2:
+ v |= (0x00010000 << s);
+ break;
+ default:
+ break;
+ }
+
+ bios_wr32(bios, r, v);
+}
+
+static void
+init_gpio_unknvd0(struct nvbios *bios, struct dcb_gpio_entry *gpio)
+{
+ u32 v, i;
+
+ v = bios_rd32(bios, 0x00d610 + (gpio->line * 4));
+ v &= 0xffffff00;
+ v |= (gpio->entry & 0x00ff0000) >> 16;
+ bios_wr32(bios, 0x00d610 + (gpio->line * 4), v);
+
+ i = (gpio->entry & 0x1f000000) >> 24;
+ if (i) {
+ v = bios_rd32(bios, 0x00d640 + ((i - 1) * 4));
+ v &= 0xffffff00;
+ v |= gpio->line;
+ bios_wr32(bios, 0x00d640 + ((i - 1) * 4), v);
+ }
+}
+
static int
init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
{
@@ -3235,7 +3280,6 @@
struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
struct nouveau_gpio_engine *pgpio = &dev_priv->engine.gpio;
- const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
int i;
if (dev_priv->card_type < NV_50) {
@@ -3248,33 +3292,20 @@
for (i = 0; i < bios->dcb.gpio.entries; i++) {
struct dcb_gpio_entry *gpio = &bios->dcb.gpio.entry[i];
- uint32_t r, s, v;
BIOSLOG(bios, "0x%04X: Entry: 0x%08X\n", offset, gpio->entry);
BIOSLOG(bios, "0x%04X: set gpio 0x%02x, state %d\n",
offset, gpio->tag, gpio->state_default);
- if (bios->execute)
- pgpio->set(bios->dev, gpio->tag, gpio->state_default);
- /* The NVIDIA binary driver doesn't appear to actually do
- * any of this, my VBIOS does however.
- */
- /* Not a clue, needs de-magicing */
- r = nv50_gpio_ctl[gpio->line >> 4];
- s = (gpio->line & 0x0f);
- v = bios_rd32(bios, r) & ~(0x00010001 << s);
- switch ((gpio->entry & 0x06000000) >> 25) {
- case 1:
- v |= (0x00000001 << s);
- break;
- case 2:
- v |= (0x00010000 << s);
- break;
- default:
- break;
- }
- bios_wr32(bios, r, v);
+ if (!bios->execute)
+ continue;
+
+ pgpio->set(bios->dev, gpio->tag, gpio->state_default);
+ if (dev_priv->card_type < NV_D0)
+ init_gpio_unknv50(bios, gpio);
+ else
+ init_gpio_unknvd0(bios, gpio);
}
return 1;
@@ -3737,6 +3768,10 @@
int count = 0, i, ret;
uint8_t id;
+ /* catch NULL script pointers */
+ if (offset == 0)
+ return 0;
+
/*
* Loop until INIT_DONE causes us to break out of the loop
* (or until offset > bios length just in case... )
@@ -4389,86 +4424,37 @@
return 0;
}
-static uint8_t *
-bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
- uint16_t record, int record_len, int record_nr,
- bool match_link)
+/* BIT 'U'/'d' table encoder subtables have hashes matching them to
+ * a particular set of encoders.
+ *
+ * This function returns true if a particular DCB entry matches.
+ */
+bool
+bios_encoder_match(struct dcb_entry *dcb, u32 hash)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nvbios *bios = &dev_priv->vbios;
- uint32_t entry;
- uint16_t table;
- int i, v;
+ if ((hash & 0x000000f0) != (dcb->location << 4))
+ return false;
+ if ((hash & 0x0000000f) != dcb->type)
+ return false;
+ if (!(hash & (dcb->or << 16)))
+ return false;
- switch (dcbent->type) {
+ switch (dcb->type) {
case OUTPUT_TMDS:
case OUTPUT_LVDS:
case OUTPUT_DP:
- break;
- default:
- match_link = false;
- break;
- }
-
- for (i = 0; i < record_nr; i++, record += record_len) {
- table = ROM16(bios->data[record]);
- if (!table)
- continue;
- entry = ROM32(bios->data[table]);
-
- if (match_link) {
- v = (entry & 0x00c00000) >> 22;
- if (!(v & dcbent->sorconf.link))
- continue;
+ if (hash & 0x00c00000) {
+ if (!(hash & (dcb->sorconf.link << 22)))
+ return false;
}
-
- v = (entry & 0x000f0000) >> 16;
- if (!(v & dcbent->or))
- continue;
-
- v = (entry & 0x000000f0) >> 4;
- if (v != dcbent->location)
- continue;
-
- v = (entry & 0x0000000f);
- if (v != dcbent->type)
- continue;
-
- return &bios->data[table];
+ default:
+ return true;
}
-
- return NULL;
-}
-
-void *
-nouveau_bios_dp_table(struct drm_device *dev, struct dcb_entry *dcbent,
- int *length)
-{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nvbios *bios = &dev_priv->vbios;
- uint8_t *table;
-
- if (!bios->display.dp_table_ptr) {
- NV_ERROR(dev, "No pointer to DisplayPort table\n");
- return NULL;
- }
- table = &bios->data[bios->display.dp_table_ptr];
-
- if (table[0] != 0x20 && table[0] != 0x21) {
- NV_ERROR(dev, "DisplayPort table version 0x%02x unknown\n",
- table[0]);
- return NULL;
- }
-
- *length = table[4];
- return bios_output_config_match(dev, dcbent,
- bios->display.dp_table_ptr + table[1],
- table[2], table[3], table[0] >= 0x21);
}
int
-nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent,
- uint32_t sub, int pxclk)
+nouveau_bios_run_display_table(struct drm_device *dev, u16 type, int pclk,
+ struct dcb_entry *dcbent, int crtc)
{
/*
* The display script table is located by the BIT 'U' table.
@@ -4498,7 +4484,7 @@
uint8_t *table = &bios->data[bios->display.script_table_ptr];
uint8_t *otable = NULL;
uint16_t script;
- int i = 0;
+ int i;
if (!bios->display.script_table_ptr) {
NV_ERROR(dev, "No pointer to output script table\n");
@@ -4550,30 +4536,33 @@
NV_DEBUG_KMS(dev, "Searching for output entry for %d %d %d\n",
dcbent->type, dcbent->location, dcbent->or);
- otable = bios_output_config_match(dev, dcbent, table[1] +
- bios->display.script_table_ptr,
- table[2], table[3], table[0] >= 0x21);
+ for (i = 0; i < table[3]; i++) {
+ otable = ROMPTR(bios, table[table[1] + (i * table[2])]);
+ if (otable && bios_encoder_match(dcbent, ROM32(otable[0])))
+ break;
+ }
+
if (!otable) {
NV_DEBUG_KMS(dev, "failed to match any output table\n");
return 1;
}
- if (pxclk < -2 || pxclk > 0) {
+ if (pclk < -2 || pclk > 0) {
/* Try to find matching script table entry */
for (i = 0; i < otable[5]; i++) {
- if (ROM16(otable[table[4] + i*6]) == sub)
+ if (ROM16(otable[table[4] + i*6]) == type)
break;
}
if (i == otable[5]) {
NV_ERROR(dev, "Table 0x%04x not found for %d/%d, "
"using first\n",
- sub, dcbent->type, dcbent->or);
+ type, dcbent->type, dcbent->or);
i = 0;
}
}
- if (pxclk == 0) {
+ if (pclk == 0) {
script = ROM16(otable[6]);
if (!script) {
NV_DEBUG_KMS(dev, "output script 0 not found\n");
@@ -4581,9 +4570,9 @@
}
NV_DEBUG_KMS(dev, "0x%04X: parsing output script 0\n", script);
- nouveau_bios_run_init_table(dev, script, dcbent);
+ nouveau_bios_run_init_table(dev, script, dcbent, crtc);
} else
- if (pxclk == -1) {
+ if (pclk == -1) {
script = ROM16(otable[8]);
if (!script) {
NV_DEBUG_KMS(dev, "output script 1 not found\n");
@@ -4591,9 +4580,9 @@
}
NV_DEBUG_KMS(dev, "0x%04X: parsing output script 1\n", script);
- nouveau_bios_run_init_table(dev, script, dcbent);
+ nouveau_bios_run_init_table(dev, script, dcbent, crtc);
} else
- if (pxclk == -2) {
+ if (pclk == -2) {
if (table[4] >= 12)
script = ROM16(otable[10]);
else
@@ -4604,31 +4593,31 @@
}
NV_DEBUG_KMS(dev, "0x%04X: parsing output script 2\n", script);
- nouveau_bios_run_init_table(dev, script, dcbent);
+ nouveau_bios_run_init_table(dev, script, dcbent, crtc);
} else
- if (pxclk > 0) {
+ if (pclk > 0) {
script = ROM16(otable[table[4] + i*6 + 2]);
if (script)
- script = clkcmptable(bios, script, pxclk);
+ script = clkcmptable(bios, script, pclk);
if (!script) {
NV_DEBUG_KMS(dev, "clock script 0 not found\n");
return 1;
}
NV_DEBUG_KMS(dev, "0x%04X: parsing clock script 0\n", script);
- nouveau_bios_run_init_table(dev, script, dcbent);
+ nouveau_bios_run_init_table(dev, script, dcbent, crtc);
} else
- if (pxclk < 0) {
+ if (pclk < 0) {
script = ROM16(otable[table[4] + i*6 + 4]);
if (script)
- script = clkcmptable(bios, script, -pxclk);
+ script = clkcmptable(bios, script, -pclk);
if (!script) {
NV_DEBUG_KMS(dev, "clock script 1 not found\n");
return 1;
}
NV_DEBUG_KMS(dev, "0x%04X: parsing clock script 1\n", script);
- nouveau_bios_run_init_table(dev, script, dcbent);
+ nouveau_bios_run_init_table(dev, script, dcbent, crtc);
}
return 0;
@@ -5478,14 +5467,6 @@
return 0;
}
-static int
-parse_bit_displayport_tbl_entry(struct drm_device *dev, struct nvbios *bios,
- struct bit_entry *bitentry)
-{
- bios->display.dp_table_ptr = ROM16(bios->data[bitentry->offset]);
- return 0;
-}
-
struct bit_table {
const char id;
int (* const parse_fn)(struct drm_device *, struct nvbios *, struct bit_entry *);
@@ -5559,7 +5540,6 @@
parse_bit_table(bios, bitoffset, &BIT_TABLE('L', lvds));
parse_bit_table(bios, bitoffset, &BIT_TABLE('T', tmds));
parse_bit_table(bios, bitoffset, &BIT_TABLE('U', U));
- parse_bit_table(bios, bitoffset, &BIT_TABLE('d', displayport));
return 0;
}
@@ -5884,9 +5864,15 @@
}
e->line = (e->entry & 0x0000001f) >> 0;
- e->state_default = (e->entry & 0x01000000) >> 24;
- e->state[0] = (e->entry & 0x18000000) >> 27;
- e->state[1] = (e->entry & 0x60000000) >> 29;
+ if (gpio[0] == 0x40) {
+ e->state_default = (e->entry & 0x01000000) >> 24;
+ e->state[0] = (e->entry & 0x18000000) >> 27;
+ e->state[1] = (e->entry & 0x60000000) >> 29;
+ } else {
+ e->state_default = (e->entry & 0x00000080) >> 7;
+ e->state[0] = (entry[4] >> 4) & 3;
+ e->state[1] = (entry[4] >> 6) & 3;
+ }
}
}
@@ -6156,7 +6142,14 @@
}
case OUTPUT_DP:
entry->dpconf.sor.link = (conf & 0x00000030) >> 4;
- entry->dpconf.link_bw = (conf & 0x00e00000) >> 21;
+ switch ((conf & 0x00e00000) >> 21) {
+ case 0:
+ entry->dpconf.link_bw = 162000;
+ break;
+ default:
+ entry->dpconf.link_bw = 270000;
+ break;
+ }
switch ((conf & 0x0f000000) >> 24) {
case 0xf:
entry->dpconf.link_nr = 4;
@@ -6769,7 +6762,7 @@
void
nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table,
- struct dcb_entry *dcbent)
+ struct dcb_entry *dcbent, int crtc)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nvbios *bios = &dev_priv->vbios;
@@ -6777,11 +6770,22 @@
spin_lock_bh(&bios->lock);
bios->display.output = dcbent;
+ bios->display.crtc = crtc;
parse_init_table(bios, table, &iexec);
bios->display.output = NULL;
spin_unlock_bh(&bios->lock);
}
+void
+nouveau_bios_init_exec(struct drm_device *dev, uint16_t table)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nvbios *bios = &dev_priv->vbios;
+ struct init_exec iexec = { true, false };
+
+ parse_init_table(bios, table, &iexec);
+}
+
static bool NVInitVBIOS(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -6863,9 +6867,8 @@
if (dev_priv->card_type >= NV_50) {
for (i = 0; i < bios->dcb.entries; i++) {
- nouveau_bios_run_display_table(dev,
- &bios->dcb.entry[i],
- 0, 0);
+ nouveau_bios_run_display_table(dev, 0, 0,
+ &bios->dcb.entry[i], -1);
}
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h
index 050c314..8adb69e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.h
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.h
@@ -289,8 +289,8 @@
struct {
struct dcb_entry *output;
+ int crtc;
uint16_t script_table_ptr;
- uint16_t dp_table_ptr;
} display;
struct {
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 890d50e..7226f41 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -956,7 +956,7 @@
break;
}
- if (dev_priv->card_type == NV_C0)
+ if (dev_priv->card_type >= NV_C0)
page_shift = node->page_shift;
else
page_shift = 12;
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index b0d753f..a319d564 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -411,13 +411,17 @@
return ret;
init->channel = chan->id;
- if (chan->dma.ib_max)
- init->pushbuf_domains = NOUVEAU_GEM_DOMAIN_VRAM |
- NOUVEAU_GEM_DOMAIN_GART;
- else if (chan->pushbuf_bo->bo.mem.mem_type == TTM_PL_VRAM)
+ if (nouveau_vram_pushbuf == 0) {
+ if (chan->dma.ib_max)
+ init->pushbuf_domains = NOUVEAU_GEM_DOMAIN_VRAM |
+ NOUVEAU_GEM_DOMAIN_GART;
+ else if (chan->pushbuf_bo->bo.mem.mem_type == TTM_PL_VRAM)
+ init->pushbuf_domains = NOUVEAU_GEM_DOMAIN_VRAM;
+ else
+ init->pushbuf_domains = NOUVEAU_GEM_DOMAIN_GART;
+ } else {
init->pushbuf_domains = NOUVEAU_GEM_DOMAIN_VRAM;
- else
- init->pushbuf_domains = NOUVEAU_GEM_DOMAIN_GART;
+ }
if (dev_priv->card_type < NV_C0) {
init->subchan[0].handle = NvM2MF;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 939d4df..e0d275e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -39,7 +39,7 @@
static void nouveau_connector_hotplug(void *, int);
-static struct nouveau_encoder *
+struct nouveau_encoder *
find_encoder(struct drm_connector *connector, int type)
{
struct drm_device *dev = connector->dev;
@@ -116,10 +116,6 @@
nouveau_connector_hotplug, connector);
}
- if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP)
- nouveau_backlight_exit(connector);
-
kfree(nv_connector->edid);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
@@ -712,11 +708,8 @@
case OUTPUT_TV:
return get_slave_funcs(encoder)->mode_valid(encoder, mode);
case OUTPUT_DP:
- if (nv_encoder->dp.link_bw == DP_LINK_BW_2_7)
- max_clock = nv_encoder->dp.link_nr * 270000;
- else
- max_clock = nv_encoder->dp.link_nr * 162000;
-
+ max_clock = nv_encoder->dp.link_nr;
+ max_clock *= nv_encoder->dp.link_bw;
clock = clock * nouveau_connector_bpp(connector) / 8;
break;
default:
@@ -871,7 +864,6 @@
dev->mode_config.scaling_mode_property,
nv_connector->scaling_mode);
}
- connector->polled = DRM_CONNECTOR_POLL_CONNECT;
/* fall-through */
case DCB_CONNECTOR_TV_0:
case DCB_CONNECTOR_TV_1:
@@ -888,27 +880,20 @@
dev->mode_config.dithering_mode_property,
nv_connector->use_dithering ?
DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
-
- if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS) {
- if (dev_priv->card_type >= NV_50)
- connector->polled = DRM_CONNECTOR_POLL_HPD;
- else
- connector->polled = DRM_CONNECTOR_POLL_CONNECT;
- }
break;
}
- if (pgpio->irq_register) {
+ if (nv_connector->dcb->gpio_tag != 0xff && pgpio->irq_register) {
pgpio->irq_register(dev, nv_connector->dcb->gpio_tag,
nouveau_connector_hotplug, connector);
+
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ } else {
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT;
}
drm_sysfs_connector_add(connector);
- if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP)
- nouveau_backlight_init(connector);
-
dcb->drm = connector;
return dcb->drm;
@@ -925,22 +910,13 @@
struct drm_connector *connector = data;
struct drm_device *dev = connector->dev;
- NV_INFO(dev, "%splugged %s\n", plugged ? "" : "un",
- drm_get_connector_name(connector));
+ NV_DEBUG(dev, "%splugged %s\n", plugged ? "" : "un",
+ drm_get_connector_name(connector));
- if (connector->encoder && connector->encoder->crtc &&
- connector->encoder->crtc->enabled) {
- struct nouveau_encoder *nv_encoder = nouveau_encoder(connector->encoder);
- struct drm_encoder_helper_funcs *helper =
- connector->encoder->helper_private;
-
- if (nv_encoder->dcb->type == OUTPUT_DP) {
- if (plugged)
- helper->dpms(connector->encoder, DRM_MODE_DPMS_ON);
- else
- helper->dpms(connector->encoder, DRM_MODE_DPMS_OFF);
- }
- }
+ if (plugged)
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+ else
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
drm_helper_hpd_irq_event(dev);
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_crtc.h b/drivers/gpu/drm/nouveau/nouveau_crtc.h
index cb1ce2a..bf8e128 100644
--- a/drivers/gpu/drm/nouveau/nouveau_crtc.h
+++ b/drivers/gpu/drm/nouveau/nouveau_crtc.h
@@ -82,14 +82,13 @@
}
int nv50_crtc_create(struct drm_device *dev, int index);
-int nv50_cursor_init(struct nouveau_crtc *);
-void nv50_cursor_fini(struct nouveau_crtc *);
int nv50_crtc_cursor_set(struct drm_crtc *drm_crtc, struct drm_file *file_priv,
uint32_t buffer_handle, uint32_t width,
uint32_t height);
int nv50_crtc_cursor_move(struct drm_crtc *drm_crtc, int x, int y);
int nv04_cursor_init(struct nouveau_crtc *);
+int nv50_cursor_init(struct nouveau_crtc *);
struct nouveau_connector *
nouveau_crtc_connector_get(struct nouveau_crtc *crtc);
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index eb514ea..ddbabef 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -105,9 +105,12 @@
if (dev_priv->chipset == 0x50)
nv_fb->r_format |= (tile_flags << 8);
- if (!tile_flags)
- nv_fb->r_pitch = 0x00100000 | fb->pitch;
- else {
+ if (!tile_flags) {
+ if (dev_priv->card_type < NV_D0)
+ nv_fb->r_pitch = 0x00100000 | fb->pitch;
+ else
+ nv_fb->r_pitch = 0x01000000 | fb->pitch;
+ } else {
u32 mode = nvbo->tile_mode;
if (dev_priv->card_type >= NV_C0)
mode >>= 4;
diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index 7beb82a..de5efe7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -28,418 +28,619 @@
#include "nouveau_i2c.h"
#include "nouveau_connector.h"
#include "nouveau_encoder.h"
+#include "nouveau_crtc.h"
+
+/******************************************************************************
+ * aux channel util functions
+ *****************************************************************************/
+#define AUX_DBG(fmt, args...) do { \
+ if (nouveau_reg_debug & NOUVEAU_REG_DEBUG_AUXCH) { \
+ NV_PRINTK(KERN_DEBUG, dev, "AUXCH(%d): " fmt, ch, ##args); \
+ } \
+} while (0)
+#define AUX_ERR(fmt, args...) NV_ERROR(dev, "AUXCH(%d): " fmt, ch, ##args)
+
+static void
+auxch_fini(struct drm_device *dev, int ch)
+{
+ nv_mask(dev, 0x00e4e4 + (ch * 0x50), 0x00310000, 0x00000000);
+}
static int
-auxch_rd(struct drm_encoder *encoder, int address, uint8_t *buf, int size)
+auxch_init(struct drm_device *dev, int ch)
{
- struct drm_device *dev = encoder->dev;
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- struct nouveau_i2c_chan *auxch;
- int ret;
+ const u32 unksel = 1; /* nfi which to use, or if it matters.. */
+ const u32 ureq = unksel ? 0x00100000 : 0x00200000;
+ const u32 urep = unksel ? 0x01000000 : 0x02000000;
+ u32 ctrl, timeout;
- auxch = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
- if (!auxch)
- return -ENODEV;
+ /* wait up to 1ms for any previous transaction to be done... */
+ timeout = 1000;
+ do {
+ ctrl = nv_rd32(dev, 0x00e4e4 + (ch * 0x50));
+ udelay(1);
+ if (!timeout--) {
+ AUX_ERR("begin idle timeout 0x%08x", ctrl);
+ return -EBUSY;
+ }
+ } while (ctrl & 0x03010000);
- ret = nouveau_dp_auxch(auxch, 9, address, buf, size);
- if (ret)
- return ret;
+ /* set some magic, and wait up to 1ms for it to appear */
+ nv_mask(dev, 0x00e4e4 + (ch * 0x50), 0x00300000, ureq);
+ timeout = 1000;
+ do {
+ ctrl = nv_rd32(dev, 0x00e4e4 + (ch * 0x50));
+ udelay(1);
+ if (!timeout--) {
+ AUX_ERR("magic wait 0x%08x\n", ctrl);
+ auxch_fini(dev, ch);
+ return -EBUSY;
+ }
+ } while ((ctrl & 0x03000000) != urep);
return 0;
}
static int
-auxch_wr(struct drm_encoder *encoder, int address, uint8_t *buf, int size)
+auxch_tx(struct drm_device *dev, int ch, u8 type, u32 addr, u8 *data, u8 size)
{
- struct drm_device *dev = encoder->dev;
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- struct nouveau_i2c_chan *auxch;
- int ret;
+ u32 ctrl, stat, timeout, retries;
+ u32 xbuf[4] = {};
+ int ret, i;
- auxch = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
- if (!auxch)
- return -ENODEV;
+ AUX_DBG("%d: 0x%08x %d\n", type, addr, size);
- ret = nouveau_dp_auxch(auxch, 8, address, buf, size);
+ ret = auxch_init(dev, ch);
+ if (ret)
+ goto out;
+
+ stat = nv_rd32(dev, 0x00e4e8 + (ch * 0x50));
+ if (!(stat & 0x10000000)) {
+ AUX_DBG("sink not detected\n");
+ ret = -ENXIO;
+ goto out;
+ }
+
+ if (!(type & 1)) {
+ memcpy(xbuf, data, size);
+ for (i = 0; i < 16; i += 4) {
+ AUX_DBG("wr 0x%08x\n", xbuf[i / 4]);
+ nv_wr32(dev, 0x00e4c0 + (ch * 0x50) + i, xbuf[i / 4]);
+ }
+ }
+
+ ctrl = nv_rd32(dev, 0x00e4e4 + (ch * 0x50));
+ ctrl &= ~0x0001f0ff;
+ ctrl |= type << 12;
+ ctrl |= size - 1;
+ nv_wr32(dev, 0x00e4e0 + (ch * 0x50), addr);
+
+ /* retry transaction a number of times on failure... */
+ ret = -EREMOTEIO;
+ for (retries = 0; retries < 32; retries++) {
+ /* reset, and delay a while if this is a retry */
+ nv_wr32(dev, 0x00e4e4 + (ch * 0x50), 0x80000000 | ctrl);
+ nv_wr32(dev, 0x00e4e4 + (ch * 0x50), 0x00000000 | ctrl);
+ if (retries)
+ udelay(400);
+
+ /* transaction request, wait up to 1ms for it to complete */
+ nv_wr32(dev, 0x00e4e4 + (ch * 0x50), 0x00010000 | ctrl);
+
+ timeout = 1000;
+ do {
+ ctrl = nv_rd32(dev, 0x00e4e4 + (ch * 0x50));
+ udelay(1);
+ if (!timeout--) {
+ AUX_ERR("tx req timeout 0x%08x\n", ctrl);
+ goto out;
+ }
+ } while (ctrl & 0x00010000);
+
+ /* read status, and check if transaction completed ok */
+ stat = nv_mask(dev, 0x00e4e8 + (ch * 0x50), 0, 0);
+ if (!(stat & 0x000f0f00)) {
+ ret = 0;
+ break;
+ }
+
+ AUX_DBG("%02d 0x%08x 0x%08x\n", retries, ctrl, stat);
+ }
+
+ if (type & 1) {
+ for (i = 0; i < 16; i += 4) {
+ xbuf[i / 4] = nv_rd32(dev, 0x00e4d0 + (ch * 0x50) + i);
+ AUX_DBG("rd 0x%08x\n", xbuf[i / 4]);
+ }
+ memcpy(data, xbuf, size);
+ }
+
+out:
+ auxch_fini(dev, ch);
return ret;
}
-static int
-nouveau_dp_lane_count_set(struct drm_encoder *encoder, uint8_t cmd)
+static u32
+dp_link_bw_get(struct drm_device *dev, int or, int link)
{
- struct drm_device *dev = encoder->dev;
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- uint32_t tmp;
- int or = nv_encoder->or, link = !(nv_encoder->dcb->sorconf.link & 1);
-
- tmp = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link));
- tmp &= ~(NV50_SOR_DP_CTRL_ENHANCED_FRAME_ENABLED |
- NV50_SOR_DP_CTRL_LANE_MASK);
- tmp |= ((1 << (cmd & DP_LANE_COUNT_MASK)) - 1) << 16;
- if (cmd & DP_LANE_COUNT_ENHANCED_FRAME_EN)
- tmp |= NV50_SOR_DP_CTRL_ENHANCED_FRAME_ENABLED;
- nv_wr32(dev, NV50_SOR_DP_CTRL(or, link), tmp);
-
- return auxch_wr(encoder, DP_LANE_COUNT_SET, &cmd, 1);
+ u32 ctrl = nv_rd32(dev, 0x614300 + (or * 0x800));
+ if (!(ctrl & 0x000c0000))
+ return 162000;
+ return 270000;
}
static int
-nouveau_dp_link_bw_set(struct drm_encoder *encoder, uint8_t cmd)
+dp_lane_count_get(struct drm_device *dev, int or, int link)
{
- struct drm_device *dev = encoder->dev;
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- uint32_t tmp;
- int reg = 0x614300 + (nv_encoder->or * 0x800);
+ u32 ctrl = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link));
+ switch (ctrl & 0x000f0000) {
+ case 0x00010000: return 1;
+ case 0x00030000: return 2;
+ default:
+ return 4;
+ }
+}
- tmp = nv_rd32(dev, reg);
- tmp &= 0xfff3ffff;
- if (cmd == DP_LINK_BW_2_7)
- tmp |= 0x00040000;
- nv_wr32(dev, reg, tmp);
+void
+nouveau_dp_tu_update(struct drm_device *dev, int or, int link, u32 clk, u32 bpp)
+{
+ const u32 symbol = 100000;
+ int bestTU = 0, bestVTUi = 0, bestVTUf = 0, bestVTUa = 0;
+ int TU, VTUi, VTUf, VTUa;
+ u64 link_data_rate, link_ratio, unk;
+ u32 best_diff = 64 * symbol;
+ u32 link_nr, link_bw, r;
- return auxch_wr(encoder, DP_LINK_BW_SET, &cmd, 1);
+ /* calculate packed data rate for each lane */
+ link_nr = dp_lane_count_get(dev, or, link);
+ link_data_rate = (clk * bpp / 8) / link_nr;
+
+ /* calculate ratio of packed data rate to link symbol rate */
+ link_bw = dp_link_bw_get(dev, or, link);
+ link_ratio = link_data_rate * symbol;
+ r = do_div(link_ratio, link_bw);
+
+ for (TU = 64; TU >= 32; TU--) {
+ /* calculate average number of valid symbols in each TU */
+ u32 tu_valid = link_ratio * TU;
+ u32 calc, diff;
+
+ /* find a hw representation for the fraction.. */
+ VTUi = tu_valid / symbol;
+ calc = VTUi * symbol;
+ diff = tu_valid - calc;
+ if (diff) {
+ if (diff >= (symbol / 2)) {
+ VTUf = symbol / (symbol - diff);
+ if (symbol - (VTUf * diff))
+ VTUf++;
+
+ if (VTUf <= 15) {
+ VTUa = 1;
+ calc += symbol - (symbol / VTUf);
+ } else {
+ VTUa = 0;
+ VTUf = 1;
+ calc += symbol;
+ }
+ } else {
+ VTUa = 0;
+ VTUf = min((int)(symbol / diff), 15);
+ calc += symbol / VTUf;
+ }
+
+ diff = calc - tu_valid;
+ } else {
+ /* no remainder, but the hw doesn't like the fractional
+ * part to be zero. decrement the integer part and
+ * have the fraction add a whole symbol back
+ */
+ VTUa = 0;
+ VTUf = 1;
+ VTUi--;
+ }
+
+ if (diff < best_diff) {
+ best_diff = diff;
+ bestTU = TU;
+ bestVTUa = VTUa;
+ bestVTUf = VTUf;
+ bestVTUi = VTUi;
+ if (diff == 0)
+ break;
+ }
+ }
+
+ if (!bestTU) {
+ NV_ERROR(dev, "DP: unable to find suitable config\n");
+ return;
+ }
+
+ /* XXX close to vbios numbers, but not right */
+ unk = (symbol - link_ratio) * bestTU;
+ unk *= link_ratio;
+ r = do_div(unk, symbol);
+ r = do_div(unk, symbol);
+ unk += 6;
+
+ nv_mask(dev, NV50_SOR_DP_CTRL(or, link), 0x000001fc, bestTU << 2);
+ nv_mask(dev, NV50_SOR_DP_SCFG(or, link), 0x010f7f3f, bestVTUa << 24 |
+ bestVTUf << 16 |
+ bestVTUi << 8 |
+ unk);
+}
+
+u8 *
+nouveau_dp_bios_data(struct drm_device *dev, struct dcb_entry *dcb, u8 **entry)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nvbios *bios = &dev_priv->vbios;
+ struct bit_entry d;
+ u8 *table;
+ int i;
+
+ if (bit_table(dev, 'd', &d)) {
+ NV_ERROR(dev, "BIT 'd' table not found\n");
+ return NULL;
+ }
+
+ if (d.version != 1) {
+ NV_ERROR(dev, "BIT 'd' table version %d unknown\n", d.version);
+ return NULL;
+ }
+
+ table = ROMPTR(bios, d.data[0]);
+ if (!table) {
+ NV_ERROR(dev, "displayport table pointer invalid\n");
+ return NULL;
+ }
+
+ switch (table[0]) {
+ case 0x20:
+ case 0x21:
+ case 0x30:
+ break;
+ default:
+ NV_ERROR(dev, "displayport table 0x%02x unknown\n", table[0]);
+ return NULL;
+ }
+
+ for (i = 0; i < table[3]; i++) {
+ *entry = ROMPTR(bios, table[table[1] + (i * table[2])]);
+ if (*entry && bios_encoder_match(dcb, ROM32((*entry)[0])))
+ return table;
+ }
+
+ NV_ERROR(dev, "displayport encoder table not found\n");
+ return NULL;
+}
+
+/******************************************************************************
+ * link training
+ *****************************************************************************/
+struct dp_state {
+ struct dcb_entry *dcb;
+ u8 *table;
+ u8 *entry;
+ int auxch;
+ int crtc;
+ int or;
+ int link;
+ u8 *dpcd;
+ int link_nr;
+ u32 link_bw;
+ u8 stat[6];
+ u8 conf[4];
+};
+
+static void
+dp_set_link_config(struct drm_device *dev, struct dp_state *dp)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ int or = dp->or, link = dp->link;
+ u8 *entry, sink[2];
+ u32 dp_ctrl;
+ u16 script;
+
+ NV_DEBUG_KMS(dev, "%d lanes at %d KB/s\n", dp->link_nr, dp->link_bw);
+
+ /* set selected link rate on source */
+ switch (dp->link_bw) {
+ case 270000:
+ nv_mask(dev, 0x614300 + (or * 0x800), 0x000c0000, 0x00040000);
+ sink[0] = DP_LINK_BW_2_7;
+ break;
+ default:
+ nv_mask(dev, 0x614300 + (or * 0x800), 0x000c0000, 0x00000000);
+ sink[0] = DP_LINK_BW_1_62;
+ break;
+ }
+
+ /* offset +0x0a of each dp encoder table entry is a pointer to another
+ * table, that has (among other things) pointers to more scripts that
+ * need to be executed, this time depending on link speed.
+ */
+ entry = ROMPTR(&dev_priv->vbios, dp->entry[10]);
+ if (entry) {
+ if (dp->table[0] < 0x30) {
+ while (dp->link_bw < (ROM16(entry[0]) * 10))
+ entry += 4;
+ script = ROM16(entry[2]);
+ } else {
+ while (dp->link_bw < (entry[0] * 27000))
+ entry += 3;
+ script = ROM16(entry[1]);
+ }
+
+ nouveau_bios_run_init_table(dev, script, dp->dcb, dp->crtc);
+ }
+
+ /* configure lane count on the source */
+ dp_ctrl = ((1 << dp->link_nr) - 1) << 16;
+ sink[1] = dp->link_nr;
+ if (dp->dpcd[2] & DP_ENHANCED_FRAME_CAP) {
+ dp_ctrl |= 0x00004000;
+ sink[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ }
+
+ nv_mask(dev, NV50_SOR_DP_CTRL(or, link), 0x001f4000, dp_ctrl);
+
+ /* inform the sink of the new configuration */
+ auxch_tx(dev, dp->auxch, 8, DP_LINK_BW_SET, sink, 2);
+}
+
+static void
+dp_set_training_pattern(struct drm_device *dev, struct dp_state *dp, u8 tp)
+{
+ u8 sink_tp;
+
+ NV_DEBUG_KMS(dev, "training pattern %d\n", tp);
+
+ nv_mask(dev, NV50_SOR_DP_CTRL(dp->or, dp->link), 0x0f000000, tp << 24);
+
+ auxch_tx(dev, dp->auxch, 9, DP_TRAINING_PATTERN_SET, &sink_tp, 1);
+ sink_tp &= ~DP_TRAINING_PATTERN_MASK;
+ sink_tp |= tp;
+ auxch_tx(dev, dp->auxch, 8, DP_TRAINING_PATTERN_SET, &sink_tp, 1);
+}
+
+static const u8 nv50_lane_map[] = { 16, 8, 0, 24 };
+static const u8 nvaf_lane_map[] = { 24, 16, 8, 0 };
+
+static int
+dp_link_train_commit(struct drm_device *dev, struct dp_state *dp)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ u32 mask = 0, drv = 0, pre = 0, unk = 0;
+ const u8 *shifts;
+ int link = dp->link;
+ int or = dp->or;
+ int i;
+
+ if (dev_priv->chipset != 0xaf)
+ shifts = nv50_lane_map;
+ else
+ shifts = nvaf_lane_map;
+
+ for (i = 0; i < dp->link_nr; i++) {
+ u8 *conf = dp->entry + dp->table[4];
+ u8 lane = (dp->stat[4 + (i >> 1)] >> ((i & 1) * 4)) & 0xf;
+ u8 lpre = (lane & 0x0c) >> 2;
+ u8 lvsw = (lane & 0x03) >> 0;
+
+ mask |= 0xff << shifts[i];
+ unk |= 1 << (shifts[i] >> 3);
+
+ dp->conf[i] = (lpre << 3) | lvsw;
+ if (lvsw == DP_TRAIN_VOLTAGE_SWING_1200)
+ dp->conf[i] |= DP_TRAIN_MAX_SWING_REACHED;
+ if (lpre == DP_TRAIN_PRE_EMPHASIS_9_5)
+ dp->conf[i] |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+ NV_DEBUG_KMS(dev, "config lane %d %02x\n", i, dp->conf[i]);
+
+ if (dp->table[0] < 0x30) {
+ u8 *last = conf + (dp->entry[4] * dp->table[5]);
+ while (lvsw != conf[0] || lpre != conf[1]) {
+ conf += dp->table[5];
+ if (conf >= last)
+ return -EINVAL;
+ }
+
+ conf += 2;
+ } else {
+ /* no lookup table anymore, set entries for each
+ * combination of voltage swing and pre-emphasis
+ * level allowed by the DP spec.
+ */
+ switch (lvsw) {
+ case 0: lpre += 0; break;
+ case 1: lpre += 4; break;
+ case 2: lpre += 7; break;
+ case 3: lpre += 9; break;
+ }
+
+ conf = conf + (lpre * dp->table[5]);
+ conf++;
+ }
+
+ drv |= conf[0] << shifts[i];
+ pre |= conf[1] << shifts[i];
+ unk = (unk & ~0x0000ff00) | (conf[2] << 8);
+ }
+
+ nv_mask(dev, NV50_SOR_DP_UNK118(or, link), mask, drv);
+ nv_mask(dev, NV50_SOR_DP_UNK120(or, link), mask, pre);
+ nv_mask(dev, NV50_SOR_DP_UNK130(or, link), 0x0000ff0f, unk);
+
+ return auxch_tx(dev, dp->auxch, 8, DP_TRAINING_LANE0_SET, dp->conf, 4);
}
static int
-nouveau_dp_link_train_set(struct drm_encoder *encoder, int pattern)
+dp_link_train_update(struct drm_device *dev, struct dp_state *dp, u32 delay)
{
- struct drm_device *dev = encoder->dev;
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- uint32_t tmp;
- uint8_t cmd;
- int or = nv_encoder->or, link = !(nv_encoder->dcb->sorconf.link & 1);
int ret;
- tmp = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link));
- tmp &= ~NV50_SOR_DP_CTRL_TRAINING_PATTERN;
- tmp |= (pattern << 24);
- nv_wr32(dev, NV50_SOR_DP_CTRL(or, link), tmp);
+ udelay(delay);
- ret = auxch_rd(encoder, DP_TRAINING_PATTERN_SET, &cmd, 1);
+ ret = auxch_tx(dev, dp->auxch, 9, DP_LANE0_1_STATUS, dp->stat, 6);
if (ret)
return ret;
- cmd &= ~DP_TRAINING_PATTERN_MASK;
- cmd |= (pattern & DP_TRAINING_PATTERN_MASK);
- return auxch_wr(encoder, DP_TRAINING_PATTERN_SET, &cmd, 1);
+
+ NV_DEBUG_KMS(dev, "status %02x %02x %02x %02x %02x %02x\n",
+ dp->stat[0], dp->stat[1], dp->stat[2], dp->stat[3],
+ dp->stat[4], dp->stat[5]);
+ return 0;
}
static int
-nouveau_dp_max_voltage_swing(struct drm_encoder *encoder)
+dp_link_train_cr(struct drm_device *dev, struct dp_state *dp)
{
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct bit_displayport_encoder_table_entry *dpse;
- struct bit_displayport_encoder_table *dpe;
- int i, dpe_headerlen, max_vs = 0;
+ bool cr_done = false, abort = false;
+ int voltage = dp->conf[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+ int tries = 0, i;
- dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
- if (!dpe)
- return false;
- dpse = (void *)((char *)dpe + dpe_headerlen);
+ dp_set_training_pattern(dev, dp, DP_TRAINING_PATTERN_1);
- for (i = 0; i < dpe_headerlen; i++, dpse++) {
- if (dpse->vs_level > max_vs)
- max_vs = dpse->vs_level;
- }
-
- return max_vs;
-}
-
-static int
-nouveau_dp_max_pre_emphasis(struct drm_encoder *encoder, int vs)
-{
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct bit_displayport_encoder_table_entry *dpse;
- struct bit_displayport_encoder_table *dpe;
- int i, dpe_headerlen, max_pre = 0;
-
- dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
- if (!dpe)
- return false;
- dpse = (void *)((char *)dpe + dpe_headerlen);
-
- for (i = 0; i < dpe_headerlen; i++, dpse++) {
- if (dpse->vs_level != vs)
- continue;
-
- if (dpse->pre_level > max_pre)
- max_pre = dpse->pre_level;
- }
-
- return max_pre;
-}
-
-static bool
-nouveau_dp_link_train_adjust(struct drm_encoder *encoder, uint8_t *config)
-{
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct bit_displayport_encoder_table *dpe;
- int ret, i, dpe_headerlen, vs = 0, pre = 0;
- uint8_t request[2];
-
- dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
- if (!dpe)
- return false;
-
- ret = auxch_rd(encoder, DP_ADJUST_REQUEST_LANE0_1, request, 2);
- if (ret)
- return false;
-
- NV_DEBUG_KMS(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]);
-
- /* Keep all lanes at the same level.. */
- for (i = 0; i < nv_encoder->dp.link_nr; i++) {
- int lane_req = (request[i >> 1] >> ((i & 1) << 2)) & 0xf;
- int lane_vs = lane_req & 3;
- int lane_pre = (lane_req >> 2) & 3;
-
- if (lane_vs > vs)
- vs = lane_vs;
- if (lane_pre > pre)
- pre = lane_pre;
- }
-
- if (vs >= nouveau_dp_max_voltage_swing(encoder)) {
- vs = nouveau_dp_max_voltage_swing(encoder);
- vs |= 4;
- }
-
- if (pre >= nouveau_dp_max_pre_emphasis(encoder, vs & 3)) {
- pre = nouveau_dp_max_pre_emphasis(encoder, vs & 3);
- pre |= 4;
- }
-
- /* Update the configuration for all lanes.. */
- for (i = 0; i < nv_encoder->dp.link_nr; i++)
- config[i] = (pre << 3) | vs;
-
- return true;
-}
-
-static bool
-nouveau_dp_link_train_commit(struct drm_encoder *encoder, uint8_t *config)
-{
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct bit_displayport_encoder_table_entry *dpse;
- struct bit_displayport_encoder_table *dpe;
- int or = nv_encoder->or, link = !(nv_encoder->dcb->sorconf.link & 1);
- int dpe_headerlen, ret, i;
-
- NV_DEBUG_KMS(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n",
- config[0], config[1], config[2], config[3]);
-
- dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
- if (!dpe)
- return false;
- dpse = (void *)((char *)dpe + dpe_headerlen);
-
- for (i = 0; i < dpe->record_nr; i++, dpse++) {
- if (dpse->vs_level == (config[0] & 3) &&
- dpse->pre_level == ((config[0] >> 3) & 3))
+ do {
+ if (dp_link_train_commit(dev, dp) ||
+ dp_link_train_update(dev, dp, 100))
break;
- }
- BUG_ON(i == dpe->record_nr);
- for (i = 0; i < nv_encoder->dp.link_nr; i++) {
- const int shift[4] = { 16, 8, 0, 24 };
- uint32_t mask = 0xff << shift[i];
- uint32_t reg0, reg1, reg2;
+ cr_done = true;
+ for (i = 0; i < dp->link_nr; i++) {
+ u8 lane = (dp->stat[i >> 1] >> ((i & 1) * 4)) & 0xf;
+ if (!(lane & DP_LANE_CR_DONE)) {
+ cr_done = false;
+ if (dp->conf[i] & DP_TRAIN_MAX_SWING_REACHED)
+ abort = true;
+ break;
+ }
+ }
- reg0 = nv_rd32(dev, NV50_SOR_DP_UNK118(or, link)) & ~mask;
- reg0 |= (dpse->reg0 << shift[i]);
- reg1 = nv_rd32(dev, NV50_SOR_DP_UNK120(or, link)) & ~mask;
- reg1 |= (dpse->reg1 << shift[i]);
- reg2 = nv_rd32(dev, NV50_SOR_DP_UNK130(or, link)) & 0xffff00ff;
- reg2 |= (dpse->reg2 << 8);
- nv_wr32(dev, NV50_SOR_DP_UNK118(or, link), reg0);
- nv_wr32(dev, NV50_SOR_DP_UNK120(or, link), reg1);
- nv_wr32(dev, NV50_SOR_DP_UNK130(or, link), reg2);
- }
+ if ((dp->conf[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) {
+ voltage = dp->conf[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+ tries = 0;
+ }
+ } while (!cr_done && !abort && ++tries < 5);
- ret = auxch_wr(encoder, DP_TRAINING_LANE0_SET, config, 4);
- if (ret)
- return false;
+ return cr_done ? 0 : -1;
+}
- return true;
+static int
+dp_link_train_eq(struct drm_device *dev, struct dp_state *dp)
+{
+ bool eq_done, cr_done = true;
+ int tries = 0, i;
+
+ dp_set_training_pattern(dev, dp, DP_TRAINING_PATTERN_2);
+
+ do {
+ if (dp_link_train_update(dev, dp, 400))
+ break;
+
+ eq_done = !!(dp->stat[2] & DP_INTERLANE_ALIGN_DONE);
+ for (i = 0; i < dp->link_nr && eq_done; i++) {
+ u8 lane = (dp->stat[i >> 1] >> ((i & 1) * 4)) & 0xf;
+ if (!(lane & DP_LANE_CR_DONE))
+ cr_done = false;
+ if (!(lane & DP_LANE_CHANNEL_EQ_DONE) ||
+ !(lane & DP_LANE_SYMBOL_LOCKED))
+ eq_done = false;
+ }
+
+ if (dp_link_train_commit(dev, dp))
+ break;
+ } while (!eq_done && cr_done && ++tries <= 5);
+
+ return eq_done ? 0 : -1;
}
bool
-nouveau_dp_link_train(struct drm_encoder *encoder)
+nouveau_dp_link_train(struct drm_encoder *encoder, u32 datarate)
{
- struct drm_device *dev = encoder->dev;
- struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct drm_nouveau_private *dev_priv = encoder->dev->dev_private;
struct nouveau_gpio_engine *pgpio = &dev_priv->engine.gpio;
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
- struct nouveau_connector *nv_connector;
- struct bit_displayport_encoder_table *dpe;
- int dpe_headerlen;
- uint8_t config[4], status[3];
- bool cr_done, cr_max_vs, eq_done, hpd_state;
- int ret = 0, i, tries, voltage;
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+ struct nouveau_connector *nv_connector =
+ nouveau_encoder_connector_get(nv_encoder);
+ struct drm_device *dev = encoder->dev;
+ struct nouveau_i2c_chan *auxch;
+ const u32 bw_list[] = { 270000, 162000, 0 };
+ const u32 *link_bw = bw_list;
+ struct dp_state dp;
- NV_DEBUG_KMS(dev, "link training!!\n");
-
- nv_connector = nouveau_encoder_connector_get(nv_encoder);
- if (!nv_connector)
+ auxch = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
+ if (!auxch)
return false;
- dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
- if (!dpe) {
- NV_ERROR(dev, "SOR-%d: no DP encoder table!\n", nv_encoder->or);
- return false;
- }
+ dp.table = nouveau_dp_bios_data(dev, nv_encoder->dcb, &dp.entry);
+ if (!dp.table)
+ return -EINVAL;
- /* disable hotplug detect, this flips around on some panels during
- * link training.
+ dp.dcb = nv_encoder->dcb;
+ dp.crtc = nv_crtc->index;
+ dp.auxch = auxch->rd;
+ dp.or = nv_encoder->or;
+ dp.link = !(nv_encoder->dcb->sorconf.link & 1);
+ dp.dpcd = nv_encoder->dp.dpcd;
+
+ /* some sinks toggle hotplug in response to some of the actions
+ * we take during link training (DP_SET_POWER is one), we need
+ * to ignore them for the moment to avoid races.
*/
- hpd_state = pgpio->irq_enable(dev, nv_connector->dcb->gpio_tag, false);
+ pgpio->irq_enable(dev, nv_connector->dcb->gpio_tag, false);
- if (dpe->script0) {
- NV_DEBUG_KMS(dev, "SOR-%d: running DP script 0\n", nv_encoder->or);
- nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script0),
- nv_encoder->dcb);
+ /* enable down-spreading, if possible */
+ if (dp.table[1] >= 16) {
+ u16 script = ROM16(dp.entry[14]);
+ if (nv_encoder->dp.dpcd[3] & 1)
+ script = ROM16(dp.entry[12]);
+
+ nouveau_bios_run_init_table(dev, script, dp.dcb, dp.crtc);
}
-train:
- cr_done = eq_done = false;
+ /* execute pre-train script from vbios */
+ nouveau_bios_run_init_table(dev, ROM16(dp.entry[6]), dp.dcb, dp.crtc);
- /* set link configuration */
- NV_DEBUG_KMS(dev, "\tbegin train: bw %d, lanes %d\n",
- nv_encoder->dp.link_bw, nv_encoder->dp.link_nr);
+ /* start off at highest link rate supported by encoder and display */
+ while (*link_bw > nv_encoder->dp.link_bw)
+ link_bw++;
- ret = nouveau_dp_link_bw_set(encoder, nv_encoder->dp.link_bw);
- if (ret)
- return false;
+ while (link_bw[0]) {
+ /* find minimum required lane count at this link rate */
+ dp.link_nr = nv_encoder->dp.link_nr;
+ while ((dp.link_nr >> 1) * link_bw[0] > datarate)
+ dp.link_nr >>= 1;
- config[0] = nv_encoder->dp.link_nr;
- if (nv_encoder->dp.dpcd_version >= 0x11 &&
- nv_encoder->dp.enhanced_frame)
- config[0] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ /* drop link rate to minimum with this lane count */
+ while ((link_bw[1] * dp.link_nr) > datarate)
+ link_bw++;
+ dp.link_bw = link_bw[0];
- ret = nouveau_dp_lane_count_set(encoder, config[0]);
- if (ret)
- return false;
+ /* program selected link configuration */
+ dp_set_link_config(dev, &dp);
- /* clock recovery */
- NV_DEBUG_KMS(dev, "\tbegin cr\n");
- ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_1);
- if (ret)
- goto stop;
-
- tries = 0;
- voltage = -1;
- memset(config, 0x00, sizeof(config));
- for (;;) {
- if (!nouveau_dp_link_train_commit(encoder, config))
+ /* attempt to train the link at this configuration */
+ memset(dp.stat, 0x00, sizeof(dp.stat));
+ if (!dp_link_train_cr(dev, &dp) &&
+ !dp_link_train_eq(dev, &dp))
break;
- udelay(100);
-
- ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 2);
- if (ret)
- break;
- NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n",
- status[0], status[1]);
-
- cr_done = true;
- cr_max_vs = false;
- for (i = 0; i < nv_encoder->dp.link_nr; i++) {
- int lane = (status[i >> 1] >> ((i & 1) * 4)) & 0xf;
-
- if (!(lane & DP_LANE_CR_DONE)) {
- cr_done = false;
- if (config[i] & DP_TRAIN_MAX_PRE_EMPHASIS_REACHED)
- cr_max_vs = true;
- break;
- }
- }
-
- if ((config[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) {
- voltage = config[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
- tries = 0;
- }
-
- if (cr_done || cr_max_vs || (++tries == 5))
- break;
-
- if (!nouveau_dp_link_train_adjust(encoder, config))
- break;
+ /* retry at lower rate */
+ link_bw++;
}
- if (!cr_done)
- goto stop;
+ /* finish link training */
+ dp_set_training_pattern(dev, &dp, DP_TRAINING_PATTERN_DISABLE);
- /* channel equalisation */
- NV_DEBUG_KMS(dev, "\tbegin eq\n");
- ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_2);
- if (ret)
- goto stop;
-
- for (tries = 0; tries <= 5; tries++) {
- udelay(400);
-
- ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 3);
- if (ret)
- break;
- NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n",
- status[0], status[1]);
-
- eq_done = true;
- if (!(status[2] & DP_INTERLANE_ALIGN_DONE))
- eq_done = false;
-
- for (i = 0; eq_done && i < nv_encoder->dp.link_nr; i++) {
- int lane = (status[i >> 1] >> ((i & 1) * 4)) & 0xf;
-
- if (!(lane & DP_LANE_CR_DONE)) {
- cr_done = false;
- break;
- }
-
- if (!(lane & DP_LANE_CHANNEL_EQ_DONE) ||
- !(lane & DP_LANE_SYMBOL_LOCKED)) {
- eq_done = false;
- break;
- }
- }
-
- if (eq_done || !cr_done)
- break;
-
- if (!nouveau_dp_link_train_adjust(encoder, config) ||
- !nouveau_dp_link_train_commit(encoder, config))
- break;
- }
-
-stop:
- /* end link training */
- ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_DISABLE);
- if (ret)
- return false;
-
- /* retry at a lower setting, if possible */
- if (!ret && !(eq_done && cr_done)) {
- NV_DEBUG_KMS(dev, "\twe failed\n");
- if (nv_encoder->dp.link_bw != DP_LINK_BW_1_62) {
- NV_DEBUG_KMS(dev, "retry link training at low rate\n");
- nv_encoder->dp.link_bw = DP_LINK_BW_1_62;
- goto train;
- }
- }
-
- if (dpe->script1) {
- NV_DEBUG_KMS(dev, "SOR-%d: running DP script 1\n", nv_encoder->or);
- nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script1),
- nv_encoder->dcb);
- }
+ /* execute post-train script from vbios */
+ nouveau_bios_run_init_table(dev, ROM16(dp.entry[8]), dp.dcb, dp.crtc);
/* re-enable hotplug detect */
- pgpio->irq_enable(dev, nv_connector->dcb->gpio_tag, hpd_state);
-
- return eq_done;
+ pgpio->irq_enable(dev, nv_connector->dcb->gpio_tag, true);
+ return true;
}
bool
@@ -447,31 +648,34 @@
{
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct drm_device *dev = encoder->dev;
- uint8_t dpcd[4];
+ struct nouveau_i2c_chan *auxch;
+ u8 *dpcd = nv_encoder->dp.dpcd;
int ret;
- ret = auxch_rd(encoder, 0x0000, dpcd, 4);
+ auxch = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
+ if (!auxch)
+ return false;
+
+ ret = auxch_tx(dev, auxch->rd, 9, DP_DPCD_REV, dpcd, 8);
if (ret)
return false;
- NV_DEBUG_KMS(dev, "encoder: link_bw %d, link_nr %d\n"
- "display: link_bw %d, link_nr %d version 0x%02x\n",
- nv_encoder->dcb->dpconf.link_bw,
- nv_encoder->dcb->dpconf.link_nr,
- dpcd[1], dpcd[2] & 0x0f, dpcd[0]);
-
- nv_encoder->dp.dpcd_version = dpcd[0];
-
- nv_encoder->dp.link_bw = dpcd[1];
- if (nv_encoder->dp.link_bw != DP_LINK_BW_1_62 &&
- !nv_encoder->dcb->dpconf.link_bw)
- nv_encoder->dp.link_bw = DP_LINK_BW_1_62;
-
+ nv_encoder->dp.link_bw = 27000 * dpcd[1];
nv_encoder->dp.link_nr = dpcd[2] & DP_MAX_LANE_COUNT_MASK;
- if (nv_encoder->dp.link_nr > nv_encoder->dcb->dpconf.link_nr)
- nv_encoder->dp.link_nr = nv_encoder->dcb->dpconf.link_nr;
- nv_encoder->dp.enhanced_frame = (dpcd[2] & DP_ENHANCED_FRAME_CAP);
+ NV_DEBUG_KMS(dev, "display: %dx%d dpcd 0x%02x\n",
+ nv_encoder->dp.link_nr, nv_encoder->dp.link_bw, dpcd[0]);
+ NV_DEBUG_KMS(dev, "encoder: %dx%d\n",
+ nv_encoder->dcb->dpconf.link_nr,
+ nv_encoder->dcb->dpconf.link_bw);
+
+ if (nv_encoder->dcb->dpconf.link_nr < nv_encoder->dp.link_nr)
+ nv_encoder->dp.link_nr = nv_encoder->dcb->dpconf.link_nr;
+ if (nv_encoder->dcb->dpconf.link_bw < nv_encoder->dp.link_bw)
+ nv_encoder->dp.link_bw = nv_encoder->dcb->dpconf.link_bw;
+
+ NV_DEBUG_KMS(dev, "maximum: %dx%d\n",
+ nv_encoder->dp.link_nr, nv_encoder->dp.link_bw);
return true;
}
@@ -480,105 +684,13 @@
nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr,
uint8_t *data, int data_nr)
{
- struct drm_device *dev = auxch->dev;
- uint32_t tmp, ctrl, stat = 0, data32[4] = {};
- int ret = 0, i, index = auxch->rd;
-
- NV_DEBUG_KMS(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr);
-
- tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd));
- nv_wr32(dev, NV50_AUXCH_CTRL(auxch->rd), tmp | 0x00100000);
- tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd));
- if (!(tmp & 0x01000000)) {
- NV_ERROR(dev, "expected bit 24 == 1, got 0x%08x\n", tmp);
- ret = -EIO;
- goto out;
- }
-
- for (i = 0; i < 3; i++) {
- tmp = nv_rd32(dev, NV50_AUXCH_STAT(auxch->rd));
- if (tmp & NV50_AUXCH_STAT_STATE_READY)
- break;
- udelay(100);
- }
-
- if (i == 3) {
- ret = -EBUSY;
- goto out;
- }
-
- if (!(cmd & 1)) {
- memcpy(data32, data, data_nr);
- for (i = 0; i < 4; i++) {
- NV_DEBUG_KMS(dev, "wr %d: 0x%08x\n", i, data32[i]);
- nv_wr32(dev, NV50_AUXCH_DATA_OUT(index, i), data32[i]);
- }
- }
-
- nv_wr32(dev, NV50_AUXCH_ADDR(index), addr);
- ctrl = nv_rd32(dev, NV50_AUXCH_CTRL(index));
- ctrl &= ~(NV50_AUXCH_CTRL_CMD | NV50_AUXCH_CTRL_LEN);
- ctrl |= (cmd << NV50_AUXCH_CTRL_CMD_SHIFT);
- ctrl |= ((data_nr - 1) << NV50_AUXCH_CTRL_LEN_SHIFT);
-
- for (i = 0; i < 16; i++) {
- nv_wr32(dev, NV50_AUXCH_CTRL(index), ctrl | 0x80000000);
- nv_wr32(dev, NV50_AUXCH_CTRL(index), ctrl);
- nv_wr32(dev, NV50_AUXCH_CTRL(index), ctrl | 0x00010000);
- if (!nv_wait(dev, NV50_AUXCH_CTRL(index),
- 0x00010000, 0x00000000)) {
- NV_ERROR(dev, "expected bit 16 == 0, got 0x%08x\n",
- nv_rd32(dev, NV50_AUXCH_CTRL(index)));
- ret = -EBUSY;
- goto out;
- }
-
- udelay(400);
-
- stat = nv_rd32(dev, NV50_AUXCH_STAT(index));
- if ((stat & NV50_AUXCH_STAT_REPLY_AUX) !=
- NV50_AUXCH_STAT_REPLY_AUX_DEFER)
- break;
- }
-
- if (i == 16) {
- NV_ERROR(dev, "auxch DEFER too many times, bailing\n");
- ret = -EREMOTEIO;
- goto out;
- }
-
- if (cmd & 1) {
- if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) {
- ret = -EREMOTEIO;
- goto out;
- }
-
- for (i = 0; i < 4; i++) {
- data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i));
- NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]);
- }
- memcpy(data, data32, data_nr);
- }
-
-out:
- tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd));
- nv_wr32(dev, NV50_AUXCH_CTRL(auxch->rd), tmp & ~0x00100000);
- tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd));
- if (tmp & 0x01000000) {
- NV_ERROR(dev, "expected bit 24 == 0, got 0x%08x\n", tmp);
- ret = -EIO;
- }
-
- udelay(400);
-
- return ret ? ret : (stat & NV50_AUXCH_STAT_REPLY);
+ return auxch_tx(auxch->dev, auxch->rd, cmd, addr, data, data_nr);
}
static int
nouveau_dp_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
{
struct nouveau_i2c_chan *auxch = (struct nouveau_i2c_chan *)adap;
- struct drm_device *dev = auxch->dev;
struct i2c_msg *msg = msgs;
int ret, mcnt = num;
@@ -602,19 +714,6 @@
if (ret < 0)
return ret;
- switch (ret & NV50_AUXCH_STAT_REPLY_I2C) {
- case NV50_AUXCH_STAT_REPLY_I2C_ACK:
- break;
- case NV50_AUXCH_STAT_REPLY_I2C_NACK:
- return -EREMOTEIO;
- case NV50_AUXCH_STAT_REPLY_I2C_DEFER:
- udelay(100);
- continue;
- default:
- NV_ERROR(dev, "bad auxch reply: 0x%08x\n", ret);
- return -EREMOTEIO;
- }
-
ptr += cnt;
remaining -= cnt;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index b30ddd8..c1e01f3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -41,7 +41,7 @@
module_param_named(agpmode, nouveau_agpmode, int, 0400);
MODULE_PARM_DESC(modeset, "Enable kernel modesetting");
-static int nouveau_modeset = -1; /* kms */
+int nouveau_modeset = -1;
module_param_named(modeset, nouveau_modeset, int, 0400);
MODULE_PARM_DESC(vbios, "Override default VBIOS location");
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index d7d51de..29837da 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -414,12 +414,13 @@
};
struct nouveau_pm_voltage_level {
- u8 voltage;
- u8 vid;
+ u32 voltage; /* microvolts */
+ u8 vid;
};
struct nouveau_pm_voltage {
bool supported;
+ u8 version;
u8 vid_mask;
struct nouveau_pm_voltage_level *level;
@@ -428,17 +429,48 @@
struct nouveau_pm_memtiming {
int id;
- u32 reg_100220;
- u32 reg_100224;
- u32 reg_100228;
- u32 reg_10022c;
- u32 reg_100230;
- u32 reg_100234;
- u32 reg_100238;
- u32 reg_10023c;
- u32 reg_100240;
+ u32 reg_0; /* 0x10f290 on Fermi, 0x100220 for older */
+ u32 reg_1;
+ u32 reg_2;
+ u32 reg_3;
+ u32 reg_4;
+ u32 reg_5;
+ u32 reg_6;
+ u32 reg_7;
+ u32 reg_8;
+ /* To be written to 0x1002c0 */
+ u8 CL;
+ u8 WR;
};
+struct nouveau_pm_tbl_header{
+ u8 version;
+ u8 header_len;
+ u8 entry_cnt;
+ u8 entry_len;
+};
+
+struct nouveau_pm_tbl_entry{
+ u8 tWR;
+ u8 tUNK_1;
+ u8 tCL;
+ u8 tRP; /* Byte 3 */
+ u8 empty_4;
+ u8 tRAS; /* Byte 5 */
+ u8 empty_6;
+ u8 tRFC; /* Byte 7 */
+ u8 empty_8;
+ u8 tRC; /* Byte 9 */
+ u8 tUNK_10, tUNK_11, tUNK_12, tUNK_13, tUNK_14;
+ u8 empty_15,empty_16,empty_17;
+ u8 tUNK_18, tUNK_19, tUNK_20, tUNK_21;
+};
+
+/* nouveau_mem.c */
+void nv30_mem_timing_entry(struct drm_device *dev, struct nouveau_pm_tbl_header *hdr,
+ struct nouveau_pm_tbl_entry *e, uint8_t magic_number,
+ struct nouveau_pm_memtiming *timing);
+
#define NOUVEAU_PM_MAX_LEVEL 8
struct nouveau_pm_level {
struct device_attribute dev_attr;
@@ -448,11 +480,19 @@
u32 core;
u32 memory;
u32 shader;
- u32 unk05;
- u32 unk0a;
+ u32 rop;
+ u32 copy;
+ u32 daemon;
+ u32 vdec;
+ u32 unk05; /* nv50:nva3, roughly.. */
+ u32 unka0; /* nva3:nvc0 */
+ u32 hub01; /* nvc0- */
+ u32 hub06; /* nvc0- */
+ u32 hub07; /* nvc0- */
- u8 voltage;
- u8 fanspeed;
+ u32 volt_min; /* microvolts */
+ u32 volt_max;
+ u8 fanspeed;
u16 memscript;
struct nouveau_pm_memtiming *timing;
@@ -496,6 +536,11 @@
void *(*clock_pre)(struct drm_device *, struct nouveau_pm_level *,
u32 id, int khz);
void (*clock_set)(struct drm_device *, void *);
+
+ int (*clocks_get)(struct drm_device *, struct nouveau_pm_level *);
+ void *(*clocks_pre)(struct drm_device *, struct nouveau_pm_level *);
+ void (*clocks_set)(struct drm_device *, void *);
+
int (*voltage_get)(struct drm_device *);
int (*voltage_set)(struct drm_device *, int voltage);
int (*fanspeed_get)(struct drm_device *);
@@ -504,7 +549,7 @@
};
struct nouveau_vram_engine {
- struct nouveau_mm *mm;
+ struct nouveau_mm mm;
int (*init)(struct drm_device *);
void (*takedown)(struct drm_device *dev);
@@ -623,6 +668,7 @@
NV_40 = 0x40,
NV_50 = 0x50,
NV_C0 = 0xc0,
+ NV_D0 = 0xd0
};
struct drm_nouveau_private {
@@ -633,8 +679,8 @@
enum nouveau_card_type card_type;
/* exact chipset, derived from NV_PMC_BOOT_0 */
int chipset;
- int stepping;
int flags;
+ u32 crystal;
void __iomem *mmio;
@@ -721,7 +767,6 @@
uint64_t vram_size;
uint64_t vram_sys_base;
- uint64_t fb_phys;
uint64_t fb_available_size;
uint64_t fb_mappable_pages;
uint64_t fb_aper_free;
@@ -784,6 +829,7 @@
}
/* nouveau_drv.c */
+extern int nouveau_modeset;
extern int nouveau_agpmode;
extern int nouveau_duallink;
extern int nouveau_uscript_lvds;
@@ -824,6 +870,8 @@
uint32_t reg, uint32_t mask, uint32_t val);
extern bool nouveau_wait_ne(struct drm_device *, uint64_t timeout,
uint32_t reg, uint32_t mask, uint32_t val);
+extern bool nouveau_wait_cb(struct drm_device *, u64 timeout,
+ bool (*cond)(void *), void *);
extern bool nouveau_wait_for_idle(struct drm_device *);
extern int nouveau_card_init(struct drm_device *);
@@ -1006,15 +1054,15 @@
/* nouveau_backlight.c */
#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
-extern int nouveau_backlight_init(struct drm_connector *);
-extern void nouveau_backlight_exit(struct drm_connector *);
+extern int nouveau_backlight_init(struct drm_device *);
+extern void nouveau_backlight_exit(struct drm_device *);
#else
-static inline int nouveau_backlight_init(struct drm_connector *dev)
+static inline int nouveau_backlight_init(struct drm_device *dev)
{
return 0;
}
-static inline void nouveau_backlight_exit(struct drm_connector *dev) { }
+static inline void nouveau_backlight_exit(struct drm_device *dev) { }
#endif
/* nouveau_bios.c */
@@ -1022,7 +1070,8 @@
extern void nouveau_bios_takedown(struct drm_device *dev);
extern int nouveau_run_vbios_init(struct drm_device *);
extern void nouveau_bios_run_init_table(struct drm_device *, uint16_t table,
- struct dcb_entry *);
+ struct dcb_entry *, int crtc);
+extern void nouveau_bios_init_exec(struct drm_device *, uint16_t table);
extern struct dcb_gpio_entry *nouveau_bios_gpio_entry(struct drm_device *,
enum dcb_gpio_tag);
extern struct dcb_connector_table_entry *
@@ -1030,11 +1079,8 @@
extern u32 get_pll_register(struct drm_device *, enum pll_types);
extern int get_pll_limits(struct drm_device *, uint32_t limit_match,
struct pll_lims *);
-extern int nouveau_bios_run_display_table(struct drm_device *,
- struct dcb_entry *,
- uint32_t script, int pxclk);
-extern void *nouveau_bios_dp_table(struct drm_device *, struct dcb_entry *,
- int *length);
+extern int nouveau_bios_run_display_table(struct drm_device *, u16 id, int clk,
+ struct dcb_entry *, int crtc);
extern bool nouveau_bios_fp_mode(struct drm_device *, struct drm_display_mode *);
extern uint8_t *nouveau_bios_embedded_edid(struct drm_device *);
extern int nouveau_bios_parse_lvds_table(struct drm_device *, int pxclk,
@@ -1043,6 +1089,7 @@
int head, int pxclk);
extern int call_lvds_script(struct drm_device *, struct dcb_entry *, int head,
enum LVDS_script, int pxclk);
+bool bios_encoder_match(struct dcb_entry *, u32 hash);
/* nouveau_ttm.c */
int nouveau_ttm_global_init(struct drm_nouveau_private *);
@@ -1053,7 +1100,9 @@
int nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr,
uint8_t *data, int data_nr);
bool nouveau_dp_detect(struct drm_encoder *);
-bool nouveau_dp_link_train(struct drm_encoder *);
+bool nouveau_dp_link_train(struct drm_encoder *, u32 datarate);
+void nouveau_dp_tu_update(struct drm_device *, int, int, u32, u32);
+u8 *nouveau_dp_bios_data(struct drm_device *, struct dcb_entry *, u8 **);
/* nv04_fb.c */
extern int nv04_fb_init(struct drm_device *);
@@ -1179,8 +1228,8 @@
/* nvc0_copy.c */
extern int nvc0_copy_create(struct drm_device *dev, int engine);
-/* nv40_mpeg.c */
-extern int nv40_mpeg_create(struct drm_device *dev);
+/* nv31_mpeg.c */
+extern int nv31_mpeg_create(struct drm_device *dev);
/* nv50_mpeg.c */
extern int nv50_mpeg_create(struct drm_device *dev);
@@ -1265,6 +1314,11 @@
extern int nv04_display_init(struct drm_device *);
extern void nv04_display_destroy(struct drm_device *);
+/* nvd0_display.c */
+extern int nvd0_display_create(struct drm_device *);
+extern int nvd0_display_init(struct drm_device *);
+extern void nvd0_display_destroy(struct drm_device *);
+
/* nv04_crtc.c */
extern int nv04_crtc_create(struct drm_device *, int index);
@@ -1374,6 +1428,8 @@
void nv50_gpio_fini(struct drm_device *dev);
int nv50_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
int nv50_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state);
+int nvd0_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
+int nvd0_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state);
int nv50_gpio_irq_register(struct drm_device *, enum dcb_gpio_tag,
void (*)(void *, int), void *);
void nv50_gpio_irq_unregister(struct drm_device *, enum dcb_gpio_tag,
@@ -1448,6 +1504,8 @@
nouveau_wait_eq(dev, 2000000000ULL, (reg), (mask), (val))
#define nv_wait_ne(dev, reg, mask, val) \
nouveau_wait_ne(dev, 2000000000ULL, (reg), (mask), (val))
+#define nv_wait_cb(dev, func, data) \
+ nouveau_wait_cb(dev, 2000000000ULL, (func), (data))
/* PRAMIN access */
static inline u32 nv_ri32(struct drm_device *dev, unsigned offset)
@@ -1514,6 +1572,7 @@
NOUVEAU_REG_DEBUG_RMVIO = 0x80,
NOUVEAU_REG_DEBUG_VGAATTR = 0x100,
NOUVEAU_REG_DEBUG_EVO = 0x200,
+ NOUVEAU_REG_DEBUG_AUXCH = 0x400
};
#define NV_REG_DEBUG(type, dev, fmt, arg...) do { \
diff --git a/drivers/gpu/drm/nouveau/nouveau_encoder.h b/drivers/gpu/drm/nouveau/nouveau_encoder.h
index ae69b61..e5d6e3f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_encoder.h
+++ b/drivers/gpu/drm/nouveau/nouveau_encoder.h
@@ -49,17 +49,17 @@
union {
struct {
- int mc_unknown;
- uint32_t unk0;
- uint32_t unk1;
- int dpcd_version;
+ u8 dpcd[8];
int link_nr;
int link_bw;
- bool enhanced_frame;
+ u32 datarate;
} dp;
};
};
+struct nouveau_encoder *
+find_encoder(struct drm_connector *connector, int type);
+
static inline struct nouveau_encoder *nouveau_encoder(struct drm_encoder *enc)
{
struct drm_encoder_slave *slave = to_encoder_slave(enc);
@@ -83,21 +83,4 @@
int nv50_sor_create(struct drm_connector *, struct dcb_entry *);
int nv50_dac_create(struct drm_connector *, struct dcb_entry *);
-struct bit_displayport_encoder_table {
- uint32_t match;
- uint8_t record_nr;
- uint8_t unknown;
- uint16_t script0;
- uint16_t script1;
- uint16_t unknown_table;
-} __attribute__ ((packed));
-
-struct bit_displayport_encoder_table_entry {
- uint8_t vs_level;
- uint8_t pre_level;
- uint8_t reg0;
- uint8_t reg1;
- uint8_t reg2;
-} __attribute__ ((packed));
-
#endif /* __NOUVEAU_ENCODER_H__ */
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index c919cfc..81116cf 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -519,7 +519,7 @@
if (USE_SEMA(dev) && dev_priv->chipset < 0x84) {
struct ttm_mem_reg *mem = &dev_priv->fence.bo->bo.mem;
- ret = nouveau_gpuobj_dma_new(chan, NV_CLASS_DMA_IN_MEMORY,
+ ret = nouveau_gpuobj_dma_new(chan, NV_CLASS_DMA_FROM_MEMORY,
mem->start << PAGE_SHIFT,
mem->size, NV_MEM_ACCESS_RW,
NV_MEM_TARGET_VRAM, &obj);
diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c
index cb389d0..f6a27fa 100644
--- a/drivers/gpu/drm/nouveau/nouveau_i2c.c
+++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c
@@ -107,6 +107,13 @@
return !!((nv_rd32(dev, i2c->rd) >> 16) & 8);
}
+static const uint32_t nv50_i2c_port[] = {
+ 0x00e138, 0x00e150, 0x00e168, 0x00e180,
+ 0x00e254, 0x00e274, 0x00e764, 0x00e780,
+ 0x00e79c, 0x00e7b8
+};
+#define NV50_I2C_PORTS ARRAY_SIZE(nv50_i2c_port)
+
static int
nv50_i2c_getscl(void *data)
{
@@ -130,28 +137,32 @@
nv50_i2c_setscl(void *data, int state)
{
struct nouveau_i2c_chan *i2c = data;
- struct drm_device *dev = i2c->dev;
- nv_wr32(dev, i2c->wr, 4 | (i2c->data ? 2 : 0) | (state ? 1 : 0));
+ nv_wr32(i2c->dev, i2c->wr, 4 | (i2c->data ? 2 : 0) | (state ? 1 : 0));
}
static void
nv50_i2c_setsda(void *data, int state)
{
struct nouveau_i2c_chan *i2c = data;
- struct drm_device *dev = i2c->dev;
- nv_wr32(dev, i2c->wr,
- (nv_rd32(dev, i2c->rd) & 1) | 4 | (state ? 2 : 0));
+ nv_mask(i2c->dev, i2c->wr, 0x00000006, 4 | (state ? 2 : 0));
i2c->data = state;
}
-static const uint32_t nv50_i2c_port[] = {
- 0x00e138, 0x00e150, 0x00e168, 0x00e180,
- 0x00e254, 0x00e274, 0x00e764, 0x00e780,
- 0x00e79c, 0x00e7b8
-};
-#define NV50_I2C_PORTS ARRAY_SIZE(nv50_i2c_port)
+static int
+nvd0_i2c_getscl(void *data)
+{
+ struct nouveau_i2c_chan *i2c = data;
+ return !!(nv_rd32(i2c->dev, i2c->rd) & 0x10);
+}
+
+static int
+nvd0_i2c_getsda(void *data)
+{
+ struct nouveau_i2c_chan *i2c = data;
+ return !!(nv_rd32(i2c->dev, i2c->rd) & 0x20);
+}
int
nouveau_i2c_init(struct drm_device *dev, struct dcb_i2c_entry *entry, int index)
@@ -163,7 +174,8 @@
if (entry->chan)
return -EEXIST;
- if (dev_priv->card_type >= NV_50 && entry->read >= NV50_I2C_PORTS) {
+ if (dev_priv->card_type >= NV_50 &&
+ dev_priv->card_type <= NV_C0 && entry->read >= NV50_I2C_PORTS) {
NV_ERROR(dev, "unknown i2c port %d\n", entry->read);
return -EINVAL;
}
@@ -192,10 +204,17 @@
case 5:
i2c->bit.setsda = nv50_i2c_setsda;
i2c->bit.setscl = nv50_i2c_setscl;
- i2c->bit.getsda = nv50_i2c_getsda;
- i2c->bit.getscl = nv50_i2c_getscl;
- i2c->rd = nv50_i2c_port[entry->read];
- i2c->wr = i2c->rd;
+ if (dev_priv->card_type < NV_D0) {
+ i2c->bit.getsda = nv50_i2c_getsda;
+ i2c->bit.getscl = nv50_i2c_getscl;
+ i2c->rd = nv50_i2c_port[entry->read];
+ i2c->wr = i2c->rd;
+ } else {
+ i2c->bit.getsda = nvd0_i2c_getsda;
+ i2c->bit.getscl = nvd0_i2c_getscl;
+ i2c->rd = 0x00d014 + (entry->read * 0x20);
+ i2c->wr = i2c->rd;
+ }
break;
case 6:
i2c->rd = entry->read;
@@ -267,7 +286,10 @@
val = 0xe001;
}
- nv_wr32(dev, reg, (nv_rd32(dev, reg) & ~0xf003) | val);
+ /* nfi, but neither auxch or i2c work if it's 1 */
+ nv_mask(dev, reg + 0x0c, 0x00000001, 0x00000000);
+ /* nfi, but switches auxch vs normal i2c */
+ nv_mask(dev, reg + 0x00, 0x0000f003, val);
}
if (!i2c->chan && nouveau_i2c_init(dev, i2c, index))
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index f9ae2fc..36bec48 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -408,8 +408,6 @@
if (ret)
return ret;
- dev_priv->fb_phys = pci_resource_start(dev->pdev, 1);
-
ret = nouveau_ttm_global_init(dev_priv);
if (ret)
return ret;
@@ -504,35 +502,146 @@
return 0;
}
+/* XXX: For now a dummy. More samples required, possibly even a card
+ * Called from nouveau_perf.c */
+void nv30_mem_timing_entry(struct drm_device *dev, struct nouveau_pm_tbl_header *hdr,
+ struct nouveau_pm_tbl_entry *e, uint8_t magic_number,
+ struct nouveau_pm_memtiming *timing) {
+
+ NV_DEBUG(dev,"Timing entry format unknown, please contact nouveau developers");
+}
+
+void nv40_mem_timing_entry(struct drm_device *dev, struct nouveau_pm_tbl_header *hdr,
+ struct nouveau_pm_tbl_entry *e, uint8_t magic_number,
+ struct nouveau_pm_memtiming *timing) {
+
+ timing->reg_0 = (e->tRC << 24 | e->tRFC << 16 | e->tRAS << 8 | e->tRP);
+
+ /* XXX: I don't trust the -1's and +1's... they must come
+ * from somewhere! */
+ timing->reg_1 = (e->tWR + 2 + magic_number) << 24 |
+ 1 << 16 |
+ (e->tUNK_1 + 2 + magic_number) << 8 |
+ (e->tCL + 2 - magic_number);
+ timing->reg_2 = (magic_number << 24 | e->tUNK_12 << 16 | e->tUNK_11 << 8 | e->tUNK_10);
+ timing->reg_2 |= 0x20200000;
+
+ NV_DEBUG(dev, "Entry %d: 220: %08x %08x %08x\n", timing->id,
+ timing->reg_0, timing->reg_1,timing->reg_2);
+}
+
+void nv50_mem_timing_entry(struct drm_device *dev, struct bit_entry *P, struct nouveau_pm_tbl_header *hdr,
+ struct nouveau_pm_tbl_entry *e, uint8_t magic_number,struct nouveau_pm_memtiming *timing) {
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ uint8_t unk18 = 1,
+ unk19 = 1,
+ unk20 = 0,
+ unk21 = 0;
+
+ switch (min(hdr->entry_len, (u8) 22)) {
+ case 22:
+ unk21 = e->tUNK_21;
+ case 21:
+ unk20 = e->tUNK_20;
+ case 20:
+ unk19 = e->tUNK_19;
+ case 19:
+ unk18 = e->tUNK_18;
+ break;
+ }
+
+ timing->reg_0 = (e->tRC << 24 | e->tRFC << 16 | e->tRAS << 8 | e->tRP);
+
+ /* XXX: I don't trust the -1's and +1's... they must come
+ * from somewhere! */
+ timing->reg_1 = (e->tWR + unk19 + 1 + magic_number) << 24 |
+ max(unk18, (u8) 1) << 16 |
+ (e->tUNK_1 + unk19 + 1 + magic_number) << 8;
+ if (dev_priv->chipset == 0xa8) {
+ timing->reg_1 |= (e->tCL - 1);
+ } else {
+ timing->reg_1 |= (e->tCL + 2 - magic_number);
+ }
+ timing->reg_2 = (e->tUNK_12 << 16 | e->tUNK_11 << 8 | e->tUNK_10);
+
+ timing->reg_5 = (e->tRAS << 24 | e->tRC);
+ timing->reg_5 += max(e->tUNK_10, e->tUNK_11) << 16;
+
+ if (P->version == 1) {
+ timing->reg_2 |= magic_number << 24;
+ timing->reg_3 = (0x14 + e->tCL) << 24 |
+ 0x16 << 16 |
+ (e->tCL - 1) << 8 |
+ (e->tCL - 1);
+ timing->reg_4 = (nv_rd32(dev,0x10022c) & 0xffff0000) | e->tUNK_13 << 8 | e->tUNK_13;
+ timing->reg_5 |= (e->tCL + 2) << 8;
+ timing->reg_7 = 0x4000202 | (e->tCL - 1) << 16;
+ } else {
+ timing->reg_2 |= (unk19 - 1) << 24;
+ /* XXX: reg_10022c for recentish cards pretty much unknown*/
+ timing->reg_3 = e->tCL - 1;
+ timing->reg_4 = (unk20 << 24 | unk21 << 16 |
+ e->tUNK_13 << 8 | e->tUNK_13);
+ /* XXX: +6? */
+ timing->reg_5 |= (unk19 + 6) << 8;
+
+ /* XXX: reg_10023c currently unknown
+ * 10023c seen as 06xxxxxx, 0bxxxxxx or 0fxxxxxx */
+ timing->reg_7 = 0x202;
+ }
+
+ NV_DEBUG(dev, "Entry %d: 220: %08x %08x %08x %08x\n", timing->id,
+ timing->reg_0, timing->reg_1,
+ timing->reg_2, timing->reg_3);
+ NV_DEBUG(dev, " 230: %08x %08x %08x %08x\n",
+ timing->reg_4, timing->reg_5,
+ timing->reg_6, timing->reg_7);
+ NV_DEBUG(dev, " 240: %08x\n", timing->reg_8);
+}
+
+void nvc0_mem_timing_entry(struct drm_device *dev, struct nouveau_pm_tbl_header *hdr,
+ struct nouveau_pm_tbl_entry *e, struct nouveau_pm_memtiming *timing) {
+ timing->reg_0 = (e->tRC << 24 | (e->tRFC & 0x7f) << 17 | e->tRAS << 8 | e->tRP);
+ timing->reg_1 = (nv_rd32(dev,0x10f294) & 0xff000000) | (e->tUNK_11&0x0f) << 20 | (e->tUNK_19 << 7) | (e->tCL & 0x0f);
+ timing->reg_2 = (nv_rd32(dev,0x10f298) & 0xff0000ff) | e->tWR << 16 | e->tUNK_1 << 8;
+ timing->reg_3 = e->tUNK_20 << 9 | e->tUNK_13;
+ timing->reg_4 = (nv_rd32(dev,0x10f2a0) & 0xfff000ff) | e->tUNK_12 << 15;
+ NV_DEBUG(dev, "Entry %d: 290: %08x %08x %08x %08x\n", timing->id,
+ timing->reg_0, timing->reg_1,
+ timing->reg_2, timing->reg_3);
+ NV_DEBUG(dev, " 2a0: %08x %08x %08x %08x\n",
+ timing->reg_4, timing->reg_5,
+ timing->reg_6, timing->reg_7);
+}
+
+/**
+ * Processes the Memory Timing BIOS table, stores generated
+ * register values
+ * @pre init scripts were run, memtiming regs are initialized
+ */
void
nouveau_mem_timing_init(struct drm_device *dev)
{
- /* cards < NVC0 only */
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
struct nouveau_pm_memtimings *memtimings = &pm->memtimings;
struct nvbios *bios = &dev_priv->vbios;
struct bit_entry P;
- u8 tUNK_0, tUNK_1, tUNK_2;
- u8 tRP; /* Byte 3 */
- u8 tRAS; /* Byte 5 */
- u8 tRFC; /* Byte 7 */
- u8 tRC; /* Byte 9 */
- u8 tUNK_10, tUNK_11, tUNK_12, tUNK_13, tUNK_14;
- u8 tUNK_18, tUNK_19, tUNK_20, tUNK_21;
- u8 magic_number = 0; /* Yeah... sorry*/
- u8 *mem = NULL, *entry;
- int i, recordlen, entries;
+ struct nouveau_pm_tbl_header *hdr = NULL;
+ uint8_t magic_number;
+ u8 *entry;
+ int i;
if (bios->type == NVBIOS_BIT) {
if (bit_table(dev, 'P', &P))
return;
if (P.version == 1)
- mem = ROMPTR(bios, P.data[4]);
+ hdr = (struct nouveau_pm_tbl_header *) ROMPTR(bios, P.data[4]);
else
if (P.version == 2)
- mem = ROMPTR(bios, P.data[8]);
+ hdr = (struct nouveau_pm_tbl_header *) ROMPTR(bios, P.data[8]);
else {
NV_WARN(dev, "unknown mem for BIT P %d\n", P.version);
}
@@ -541,150 +650,56 @@
return;
}
- if (!mem) {
+ if (!hdr) {
NV_DEBUG(dev, "memory timing table pointer invalid\n");
return;
}
- if (mem[0] != 0x10) {
- NV_WARN(dev, "memory timing table 0x%02x unknown\n", mem[0]);
+ if (hdr->version != 0x10) {
+ NV_WARN(dev, "memory timing table 0x%02x unknown\n", hdr->version);
return;
}
/* validate record length */
- entries = mem[2];
- recordlen = mem[3];
- if (recordlen < 15) {
- NV_ERROR(dev, "mem timing table length unknown: %d\n", mem[3]);
+ if (hdr->entry_len < 15) {
+ NV_ERROR(dev, "mem timing table length unknown: %d\n", hdr->entry_len);
return;
}
/* parse vbios entries into common format */
memtimings->timing =
- kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL);
+ kcalloc(hdr->entry_cnt, sizeof(*memtimings->timing), GFP_KERNEL);
if (!memtimings->timing)
return;
/* Get "some number" from the timing reg for NV_40 and NV_50
- * Used in calculations later */
- if (dev_priv->card_type >= NV_40 && dev_priv->chipset < 0x98) {
+ * Used in calculations later... source unknown */
+ magic_number = 0;
+ if (P.version == 1) {
magic_number = (nv_rd32(dev, 0x100228) & 0x0f000000) >> 24;
}
- entry = mem + mem[1];
- for (i = 0; i < entries; i++, entry += recordlen) {
+ entry = (u8*) hdr + hdr->header_len;
+ for (i = 0; i < hdr->entry_cnt; i++, entry += hdr->entry_len) {
struct nouveau_pm_memtiming *timing = &pm->memtimings.timing[i];
if (entry[0] == 0)
continue;
- tUNK_18 = 1;
- tUNK_19 = 1;
- tUNK_20 = 0;
- tUNK_21 = 0;
- switch (min(recordlen, 22)) {
- case 22:
- tUNK_21 = entry[21];
- case 21:
- tUNK_20 = entry[20];
- case 20:
- tUNK_19 = entry[19];
- case 19:
- tUNK_18 = entry[18];
- default:
- tUNK_0 = entry[0];
- tUNK_1 = entry[1];
- tUNK_2 = entry[2];
- tRP = entry[3];
- tRAS = entry[5];
- tRFC = entry[7];
- tRC = entry[9];
- tUNK_10 = entry[10];
- tUNK_11 = entry[11];
- tUNK_12 = entry[12];
- tUNK_13 = entry[13];
- tUNK_14 = entry[14];
- break;
- }
-
- timing->reg_100220 = (tRC << 24 | tRFC << 16 | tRAS << 8 | tRP);
-
- /* XXX: I don't trust the -1's and +1's... they must come
- * from somewhere! */
- timing->reg_100224 = (tUNK_0 + tUNK_19 + 1 + magic_number) << 24 |
- max(tUNK_18, (u8) 1) << 16 |
- (tUNK_1 + tUNK_19 + 1 + magic_number) << 8;
- if (dev_priv->chipset == 0xa8) {
- timing->reg_100224 |= (tUNK_2 - 1);
- } else {
- timing->reg_100224 |= (tUNK_2 + 2 - magic_number);
- }
-
- timing->reg_100228 = (tUNK_12 << 16 | tUNK_11 << 8 | tUNK_10);
- if (dev_priv->chipset >= 0xa3 && dev_priv->chipset < 0xaa)
- timing->reg_100228 |= (tUNK_19 - 1) << 24;
- else
- timing->reg_100228 |= magic_number << 24;
-
- if (dev_priv->card_type == NV_40) {
- /* NV40: don't know what the rest of the regs are..
- * And don't need to know either */
- timing->reg_100228 |= 0x20200000;
- } else if (dev_priv->card_type >= NV_50) {
- if (dev_priv->chipset < 0x98 ||
- (dev_priv->chipset == 0x98 &&
- dev_priv->stepping <= 0xa1)) {
- timing->reg_10022c = (0x14 + tUNK_2) << 24 |
- 0x16 << 16 |
- (tUNK_2 - 1) << 8 |
- (tUNK_2 - 1);
- } else {
- /* XXX: reg_10022c for recentish cards */
- timing->reg_10022c = tUNK_2 - 1;
- }
-
- timing->reg_100230 = (tUNK_20 << 24 | tUNK_21 << 16 |
- tUNK_13 << 8 | tUNK_13);
-
- timing->reg_100234 = (tRAS << 24 | tRC);
- timing->reg_100234 += max(tUNK_10, tUNK_11) << 16;
-
- if (dev_priv->chipset < 0x98 ||
- (dev_priv->chipset == 0x98 &&
- dev_priv->stepping <= 0xa1)) {
- timing->reg_100234 |= (tUNK_2 + 2) << 8;
- } else {
- /* XXX: +6? */
- timing->reg_100234 |= (tUNK_19 + 6) << 8;
- }
-
- /* XXX; reg_100238
- * reg_100238: 0x00?????? */
- timing->reg_10023c = 0x202;
- if (dev_priv->chipset < 0x98 ||
- (dev_priv->chipset == 0x98 &&
- dev_priv->stepping <= 0xa1)) {
- timing->reg_10023c |= 0x4000000 | (tUNK_2 - 1) << 16;
- } else {
- /* XXX: reg_10023c
- * currently unknown
- * 10023c seen as 06xxxxxx, 0bxxxxxx or 0fxxxxxx */
- }
-
- /* XXX: reg_100240? */
- }
timing->id = i;
+ timing->WR = entry[0];
+ timing->CL = entry[2];
- NV_DEBUG(dev, "Entry %d: 220: %08x %08x %08x %08x\n", i,
- timing->reg_100220, timing->reg_100224,
- timing->reg_100228, timing->reg_10022c);
- NV_DEBUG(dev, " 230: %08x %08x %08x %08x\n",
- timing->reg_100230, timing->reg_100234,
- timing->reg_100238, timing->reg_10023c);
- NV_DEBUG(dev, " 240: %08x\n", timing->reg_100240);
+ if(dev_priv->card_type <= NV_40) {
+ nv40_mem_timing_entry(dev,hdr,(struct nouveau_pm_tbl_entry*) entry,magic_number,&pm->memtimings.timing[i]);
+ } else if(dev_priv->card_type == NV_50){
+ nv50_mem_timing_entry(dev,&P,hdr,(struct nouveau_pm_tbl_entry*) entry,magic_number,&pm->memtimings.timing[i]);
+ } else if(dev_priv->card_type == NV_C0) {
+ nvc0_mem_timing_entry(dev,hdr,(struct nouveau_pm_tbl_entry*) entry,&pm->memtimings.timing[i]);
+ }
}
- memtimings->nr_timing = entries;
- memtimings->supported = (dev_priv->chipset <= 0x98);
+ memtimings->nr_timing = hdr->entry_cnt;
+ memtimings->supported = P.version == 1;
}
void
@@ -693,7 +708,10 @@
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_memtimings *mem = &dev_priv->engine.pm.memtimings;
- kfree(mem->timing);
+ if(mem->timing) {
+ kfree(mem->timing);
+ mem->timing = NULL;
+ }
}
static int
diff --git a/drivers/gpu/drm/nouveau/nouveau_mm.c b/drivers/gpu/drm/nouveau/nouveau_mm.c
index 1640dec..b29ffb3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mm.c
@@ -27,7 +27,7 @@
#include "nouveau_mm.h"
static inline void
-region_put(struct nouveau_mm *rmm, struct nouveau_mm_node *a)
+region_put(struct nouveau_mm *mm, struct nouveau_mm_node *a)
{
list_del(&a->nl_entry);
list_del(&a->fl_entry);
@@ -35,7 +35,7 @@
}
static struct nouveau_mm_node *
-region_split(struct nouveau_mm *rmm, struct nouveau_mm_node *a, u32 size)
+region_split(struct nouveau_mm *mm, struct nouveau_mm_node *a, u32 size)
{
struct nouveau_mm_node *b;
@@ -57,33 +57,33 @@
return b;
}
-#define node(root, dir) ((root)->nl_entry.dir == &rmm->nodes) ? NULL : \
+#define node(root, dir) ((root)->nl_entry.dir == &mm->nodes) ? NULL : \
list_entry((root)->nl_entry.dir, struct nouveau_mm_node, nl_entry)
void
-nouveau_mm_put(struct nouveau_mm *rmm, struct nouveau_mm_node *this)
+nouveau_mm_put(struct nouveau_mm *mm, struct nouveau_mm_node *this)
{
struct nouveau_mm_node *prev = node(this, prev);
struct nouveau_mm_node *next = node(this, next);
- list_add(&this->fl_entry, &rmm->free);
+ list_add(&this->fl_entry, &mm->free);
this->type = 0;
if (prev && prev->type == 0) {
prev->length += this->length;
- region_put(rmm, this);
+ region_put(mm, this);
this = prev;
}
if (next && next->type == 0) {
next->offset = this->offset;
next->length += this->length;
- region_put(rmm, this);
+ region_put(mm, this);
}
}
int
-nouveau_mm_get(struct nouveau_mm *rmm, int type, u32 size, u32 size_nc,
+nouveau_mm_get(struct nouveau_mm *mm, int type, u32 size, u32 size_nc,
u32 align, struct nouveau_mm_node **pnode)
{
struct nouveau_mm_node *prev, *this, *next;
@@ -92,17 +92,17 @@
u32 splitoff;
u32 s, e;
- list_for_each_entry(this, &rmm->free, fl_entry) {
+ list_for_each_entry(this, &mm->free, fl_entry) {
e = this->offset + this->length;
s = this->offset;
prev = node(this, prev);
if (prev && prev->type != type)
- s = roundup(s, rmm->block_size);
+ s = roundup(s, mm->block_size);
next = node(this, next);
if (next && next->type != type)
- e = rounddown(e, rmm->block_size);
+ e = rounddown(e, mm->block_size);
s = (s + align_mask) & ~align_mask;
e &= ~align_mask;
@@ -110,10 +110,10 @@
continue;
splitoff = s - this->offset;
- if (splitoff && !region_split(rmm, this, splitoff))
+ if (splitoff && !region_split(mm, this, splitoff))
return -ENOMEM;
- this = region_split(rmm, this, min(size, e - s));
+ this = region_split(mm, this, min(size, e - s));
if (!this)
return -ENOMEM;
@@ -127,52 +127,49 @@
}
int
-nouveau_mm_init(struct nouveau_mm **prmm, u32 offset, u32 length, u32 block)
+nouveau_mm_init(struct nouveau_mm *mm, u32 offset, u32 length, u32 block)
{
- struct nouveau_mm *rmm;
- struct nouveau_mm_node *heap;
+ struct nouveau_mm_node *node;
- heap = kzalloc(sizeof(*heap), GFP_KERNEL);
- if (!heap)
- return -ENOMEM;
- heap->offset = roundup(offset, block);
- heap->length = rounddown(offset + length, block) - heap->offset;
-
- rmm = kzalloc(sizeof(*rmm), GFP_KERNEL);
- if (!rmm) {
- kfree(heap);
- return -ENOMEM;
+ if (block) {
+ mutex_init(&mm->mutex);
+ INIT_LIST_HEAD(&mm->nodes);
+ INIT_LIST_HEAD(&mm->free);
+ mm->block_size = block;
+ mm->heap_nodes = 0;
}
- rmm->block_size = block;
- mutex_init(&rmm->mutex);
- INIT_LIST_HEAD(&rmm->nodes);
- INIT_LIST_HEAD(&rmm->free);
- list_add(&heap->nl_entry, &rmm->nodes);
- list_add(&heap->fl_entry, &rmm->free);
- *prmm = rmm;
+ node = kzalloc(sizeof(*node), GFP_KERNEL);
+ if (!node)
+ return -ENOMEM;
+ node->offset = roundup(offset, mm->block_size);
+ node->length = rounddown(offset + length, mm->block_size) - node->offset;
+
+ list_add_tail(&node->nl_entry, &mm->nodes);
+ list_add_tail(&node->fl_entry, &mm->free);
+ mm->heap_nodes++;
return 0;
}
int
-nouveau_mm_fini(struct nouveau_mm **prmm)
+nouveau_mm_fini(struct nouveau_mm *mm)
{
- struct nouveau_mm *rmm = *prmm;
struct nouveau_mm_node *node, *heap =
- list_first_entry(&rmm->nodes, struct nouveau_mm_node, nl_entry);
+ list_first_entry(&mm->nodes, struct nouveau_mm_node, nl_entry);
+ int nodes = 0;
- if (!list_is_singular(&rmm->nodes)) {
- printk(KERN_ERR "nouveau_mm not empty at destroy time!\n");
- list_for_each_entry(node, &rmm->nodes, nl_entry) {
- printk(KERN_ERR "0x%02x: 0x%08x 0x%08x\n",
- node->type, node->offset, node->length);
+ list_for_each_entry(node, &mm->nodes, nl_entry) {
+ if (nodes++ == mm->heap_nodes) {
+ printk(KERN_ERR "nouveau_mm in use at destroy time!\n");
+ list_for_each_entry(node, &mm->nodes, nl_entry) {
+ printk(KERN_ERR "0x%02x: 0x%08x 0x%08x\n",
+ node->type, node->offset, node->length);
+ }
+ WARN_ON(1);
+ return -EBUSY;
}
- WARN_ON(1);
- return -EBUSY;
}
kfree(heap);
- kfree(rmm);
- *prmm = NULL;
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_mm.h b/drivers/gpu/drm/nouveau/nouveau_mm.h
index b9c016d..57a600c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mm.h
+++ b/drivers/gpu/drm/nouveau/nouveau_mm.h
@@ -42,10 +42,11 @@
struct mutex mutex;
u32 block_size;
+ int heap_nodes;
};
-int nouveau_mm_init(struct nouveau_mm **, u32 offset, u32 length, u32 block);
-int nouveau_mm_fini(struct nouveau_mm **);
+int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block);
+int nouveau_mm_fini(struct nouveau_mm *);
int nouveau_mm_pre(struct nouveau_mm *);
int nouveau_mm_get(struct nouveau_mm *, int type, u32 size, u32 size_nc,
u32 align, struct nouveau_mm_node **);
diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index 159b7c4..02222c5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -693,6 +693,7 @@
static int
nvc0_gpuobj_channel_init(struct nouveau_channel *chan, struct nouveau_vm *vm)
{
+ struct drm_nouveau_private *dev_priv = chan->dev->dev_private;
struct drm_device *dev = chan->dev;
struct nouveau_gpuobj *pgd = NULL;
struct nouveau_vm_pgd *vpgd;
@@ -722,6 +723,9 @@
nv_wo32(chan->ramin, 0x020c, 0x000000ff);
/* map display semaphore buffers into channel's vm */
+ if (dev_priv->card_type >= NV_D0)
+ return 0;
+
for (i = 0; i < 2; i++) {
struct nv50_display_crtc *dispc = &nv50_display(dev)->crtc[i];
@@ -746,7 +750,7 @@
int ret, i;
NV_DEBUG(dev, "ch%d vram=0x%08x tt=0x%08x\n", chan->id, vram_h, tt_h);
- if (dev_priv->card_type == NV_C0)
+ if (dev_priv->card_type >= NV_C0)
return nvc0_gpuobj_channel_init(chan, vm);
/* Allocate a chunk of memory for per-channel object storage */
@@ -793,7 +797,7 @@
return ret;
/* dma objects for display sync channel semaphore blocks */
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < dev->mode_config.num_crtc; i++) {
struct nouveau_gpuobj *sem = NULL;
struct nv50_display_crtc *dispc =
&nv50_display(dev)->crtc[i];
@@ -875,18 +879,18 @@
NV_DEBUG(dev, "ch%d\n", chan->id);
- if (dev_priv->card_type >= NV_50) {
+ if (dev_priv->card_type >= NV_50 && dev_priv->card_type <= NV_C0) {
struct nv50_display *disp = nv50_display(dev);
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < dev->mode_config.num_crtc; i++) {
struct nv50_display_crtc *dispc = &disp->crtc[i];
nouveau_bo_vma_del(dispc->sem.bo, &chan->dispc_vma[i]);
}
-
- nouveau_vm_ref(NULL, &chan->vm, chan->vm_pd);
- nouveau_gpuobj_ref(NULL, &chan->vm_pd);
}
+ nouveau_vm_ref(NULL, &chan->vm, chan->vm_pd);
+ nouveau_gpuobj_ref(NULL, &chan->vm_pd);
+
if (drm_mm_initialized(&chan->ramin_heap))
drm_mm_takedown(&chan->ramin_heap);
nouveau_gpuobj_ref(NULL, &chan->ramin);
diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c
index ef9dec0..9f178aa 100644
--- a/drivers/gpu/drm/nouveau/nouveau_perf.c
+++ b/drivers/gpu/drm/nouveau/nouveau_perf.c
@@ -127,13 +127,57 @@
entry += ramcfg * recordlen;
if (entry[1] >= pm->memtimings.nr_timing) {
- NV_WARN(dev, "timingset %d does not exist\n", entry[1]);
+ if (entry[1] != 0xff)
+ NV_WARN(dev, "timingset %d does not exist\n", entry[1]);
return NULL;
}
return &pm->memtimings.timing[entry[1]];
}
+static void
+nouveau_perf_voltage(struct drm_device *dev, struct bit_entry *P,
+ struct nouveau_pm_level *perflvl)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nvbios *bios = &dev_priv->vbios;
+ u8 *vmap;
+ int id;
+
+ id = perflvl->volt_min;
+ perflvl->volt_min = 0;
+
+ /* boards using voltage table version <0x40 store the voltage
+ * level directly in the perflvl entry as a multiple of 10mV
+ */
+ if (dev_priv->engine.pm.voltage.version < 0x40) {
+ perflvl->volt_min = id * 10000;
+ perflvl->volt_max = perflvl->volt_min;
+ return;
+ }
+
+ /* on newer ones, the perflvl stores an index into yet another
+ * vbios table containing a min/max voltage value for the perflvl
+ */
+ if (P->version != 2 || P->length < 34) {
+ NV_DEBUG(dev, "where's our volt map table ptr? %d %d\n",
+ P->version, P->length);
+ return;
+ }
+
+ vmap = ROMPTR(bios, P->data[32]);
+ if (!vmap) {
+ NV_DEBUG(dev, "volt map table pointer invalid\n");
+ return;
+ }
+
+ if (id < vmap[3]) {
+ vmap += vmap[1] + (vmap[2] * id);
+ perflvl->volt_min = ROM32(vmap[0]);
+ perflvl->volt_max = ROM32(vmap[4]);
+ }
+}
+
void
nouveau_perf_init(struct drm_device *dev)
{
@@ -141,6 +185,8 @@
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
struct nvbios *bios = &dev_priv->vbios;
struct bit_entry P;
+ struct nouveau_pm_memtimings *memtimings = &pm->memtimings;
+ struct nouveau_pm_tbl_header mt_hdr;
u8 version, headerlen, recordlen, entries;
u8 *perf, *entry;
int vid, i;
@@ -188,6 +234,22 @@
}
entry = perf + headerlen;
+
+ /* For version 0x15, initialize memtiming table */
+ if(version == 0x15) {
+ memtimings->timing =
+ kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL);
+ if(!memtimings) {
+ NV_WARN(dev,"Could not allocate memtiming table\n");
+ return;
+ }
+
+ mt_hdr.entry_cnt = entries;
+ mt_hdr.entry_len = 14;
+ mt_hdr.version = version;
+ mt_hdr.header_len = 4;
+ }
+
for (i = 0; i < entries; i++) {
struct nouveau_pm_level *perflvl = &pm->perflvl[pm->nr_perflvl];
@@ -203,7 +265,8 @@
case 0x13:
case 0x15:
perflvl->fanspeed = entry[55];
- perflvl->voltage = (recordlen > 56) ? entry[56] : 0;
+ if (recordlen > 56)
+ perflvl->volt_min = entry[56];
perflvl->core = ROM32(entry[1]) * 10;
perflvl->memory = ROM32(entry[5]) * 20;
break;
@@ -211,9 +274,10 @@
case 0x23:
case 0x24:
perflvl->fanspeed = entry[4];
- perflvl->voltage = entry[5];
- perflvl->core = ROM16(entry[6]) * 1000;
-
+ perflvl->volt_min = entry[5];
+ perflvl->shader = ROM16(entry[6]) * 1000;
+ perflvl->core = perflvl->shader;
+ perflvl->core += (signed char)entry[8] * 1000;
if (dev_priv->chipset == 0x49 ||
dev_priv->chipset == 0x4b)
perflvl->memory = ROM16(entry[11]) * 1000;
@@ -223,7 +287,7 @@
break;
case 0x25:
perflvl->fanspeed = entry[4];
- perflvl->voltage = entry[5];
+ perflvl->volt_min = entry[5];
perflvl->core = ROM16(entry[6]) * 1000;
perflvl->shader = ROM16(entry[10]) * 1000;
perflvl->memory = ROM16(entry[12]) * 1000;
@@ -232,7 +296,7 @@
perflvl->memscript = ROM16(entry[2]);
case 0x35:
perflvl->fanspeed = entry[6];
- perflvl->voltage = entry[7];
+ perflvl->volt_min = entry[7];
perflvl->core = ROM16(entry[8]) * 1000;
perflvl->shader = ROM16(entry[10]) * 1000;
perflvl->memory = ROM16(entry[12]) * 1000;
@@ -240,30 +304,34 @@
perflvl->unk05 = ROM16(entry[16]) * 1000;
break;
case 0x40:
-#define subent(n) entry[perf[2] + ((n) * perf[3])]
+#define subent(n) (ROM16(entry[perf[2] + ((n) * perf[3])]) & 0xfff) * 1000
perflvl->fanspeed = 0; /*XXX*/
- perflvl->voltage = entry[2];
+ perflvl->volt_min = entry[2];
if (dev_priv->card_type == NV_50) {
- perflvl->core = ROM16(subent(0)) & 0xfff;
- perflvl->shader = ROM16(subent(1)) & 0xfff;
- perflvl->memory = ROM16(subent(2)) & 0xfff;
+ perflvl->core = subent(0);
+ perflvl->shader = subent(1);
+ perflvl->memory = subent(2);
+ perflvl->vdec = subent(3);
+ perflvl->unka0 = subent(4);
} else {
- perflvl->shader = ROM16(subent(3)) & 0xfff;
+ perflvl->hub06 = subent(0);
+ perflvl->hub01 = subent(1);
+ perflvl->copy = subent(2);
+ perflvl->shader = subent(3);
+ perflvl->rop = subent(4);
+ perflvl->memory = subent(5);
+ perflvl->vdec = subent(6);
+ perflvl->daemon = subent(10);
+ perflvl->hub07 = subent(11);
perflvl->core = perflvl->shader / 2;
- perflvl->unk0a = ROM16(subent(4)) & 0xfff;
- perflvl->memory = ROM16(subent(5)) & 0xfff;
}
-
- perflvl->core *= 1000;
- perflvl->shader *= 1000;
- perflvl->memory *= 1000;
- perflvl->unk0a *= 1000;
break;
}
/* make sure vid is valid */
- if (pm->voltage.supported && perflvl->voltage) {
- vid = nouveau_volt_vid_lookup(dev, perflvl->voltage);
+ nouveau_perf_voltage(dev, &P, perflvl);
+ if (pm->voltage.supported && perflvl->volt_min) {
+ vid = nouveau_volt_vid_lookup(dev, perflvl->volt_min);
if (vid < 0) {
NV_DEBUG(dev, "drop perflvl %d, bad vid\n", i);
entry += recordlen;
@@ -272,7 +340,11 @@
}
/* get the corresponding memory timings */
- if (version > 0x15) {
+ if (version == 0x15) {
+ memtimings->timing[i].id = i;
+ nv30_mem_timing_entry(dev,&mt_hdr,(struct nouveau_pm_tbl_entry*) &entry[41],0,&memtimings->timing[i]);
+ perflvl->timing = &memtimings->timing[i];
+ } else if (version > 0x15) {
/* last 3 args are for < 0x40, ignored for >= 0x40 */
perflvl->timing =
nouveau_perf_timing(dev, &P,
diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c
index da8d994..a539fd2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.c
@@ -64,18 +64,26 @@
if (perflvl == pm->cur)
return 0;
- if (pm->voltage.supported && pm->voltage_set && perflvl->voltage) {
- ret = pm->voltage_set(dev, perflvl->voltage);
+ if (pm->voltage.supported && pm->voltage_set && perflvl->volt_min) {
+ ret = pm->voltage_set(dev, perflvl->volt_min);
if (ret) {
NV_ERROR(dev, "voltage_set %d failed: %d\n",
- perflvl->voltage, ret);
+ perflvl->volt_min, ret);
}
}
- nouveau_pm_clock_set(dev, perflvl, PLL_CORE, perflvl->core);
- nouveau_pm_clock_set(dev, perflvl, PLL_SHADER, perflvl->shader);
- nouveau_pm_clock_set(dev, perflvl, PLL_MEMORY, perflvl->memory);
- nouveau_pm_clock_set(dev, perflvl, PLL_UNK05, perflvl->unk05);
+ if (pm->clocks_pre) {
+ void *state = pm->clocks_pre(dev, perflvl);
+ if (IS_ERR(state))
+ return PTR_ERR(state);
+ pm->clocks_set(dev, state);
+ } else
+ if (pm->clock_set) {
+ nouveau_pm_clock_set(dev, perflvl, PLL_CORE, perflvl->core);
+ nouveau_pm_clock_set(dev, perflvl, PLL_SHADER, perflvl->shader);
+ nouveau_pm_clock_set(dev, perflvl, PLL_MEMORY, perflvl->memory);
+ nouveau_pm_clock_set(dev, perflvl, PLL_UNK05, perflvl->unk05);
+ }
pm->cur = perflvl;
return 0;
@@ -92,9 +100,6 @@
if (nouveau_perflvl_wr != 7777)
return -EPERM;
- if (!pm->clock_set)
- return -EINVAL;
-
if (!strncmp(profile, "boot", 4))
perflvl = &pm->boot;
else {
@@ -123,31 +128,37 @@
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
int ret;
- if (!pm->clock_get)
- return -EINVAL;
-
memset(perflvl, 0, sizeof(*perflvl));
- ret = pm->clock_get(dev, PLL_CORE);
- if (ret > 0)
- perflvl->core = ret;
+ if (pm->clocks_get) {
+ ret = pm->clocks_get(dev, perflvl);
+ if (ret)
+ return ret;
+ } else
+ if (pm->clock_get) {
+ ret = pm->clock_get(dev, PLL_CORE);
+ if (ret > 0)
+ perflvl->core = ret;
- ret = pm->clock_get(dev, PLL_MEMORY);
- if (ret > 0)
- perflvl->memory = ret;
+ ret = pm->clock_get(dev, PLL_MEMORY);
+ if (ret > 0)
+ perflvl->memory = ret;
- ret = pm->clock_get(dev, PLL_SHADER);
- if (ret > 0)
- perflvl->shader = ret;
+ ret = pm->clock_get(dev, PLL_SHADER);
+ if (ret > 0)
+ perflvl->shader = ret;
- ret = pm->clock_get(dev, PLL_UNK05);
- if (ret > 0)
- perflvl->unk05 = ret;
+ ret = pm->clock_get(dev, PLL_UNK05);
+ if (ret > 0)
+ perflvl->unk05 = ret;
+ }
if (pm->voltage.supported && pm->voltage_get) {
ret = pm->voltage_get(dev);
- if (ret > 0)
- perflvl->voltage = ret;
+ if (ret > 0) {
+ perflvl->volt_min = ret;
+ perflvl->volt_max = ret;
+ }
}
return 0;
@@ -156,7 +167,7 @@
static void
nouveau_pm_perflvl_info(struct nouveau_pm_level *perflvl, char *ptr, int len)
{
- char c[16], s[16], v[16], f[16], t[16];
+ char c[16], s[16], v[32], f[16], t[16], m[16];
c[0] = '\0';
if (perflvl->core)
@@ -166,9 +177,19 @@
if (perflvl->shader)
snprintf(s, sizeof(s), " shader %dMHz", perflvl->shader / 1000);
+ m[0] = '\0';
+ if (perflvl->memory)
+ snprintf(m, sizeof(m), " memory %dMHz", perflvl->memory / 1000);
+
v[0] = '\0';
- if (perflvl->voltage)
- snprintf(v, sizeof(v), " voltage %dmV", perflvl->voltage * 10);
+ if (perflvl->volt_min && perflvl->volt_min != perflvl->volt_max) {
+ snprintf(v, sizeof(v), " voltage %dmV-%dmV",
+ perflvl->volt_min / 1000, perflvl->volt_max / 1000);
+ } else
+ if (perflvl->volt_min) {
+ snprintf(v, sizeof(v), " voltage %dmV",
+ perflvl->volt_min / 1000);
+ }
f[0] = '\0';
if (perflvl->fanspeed)
@@ -178,8 +199,7 @@
if (perflvl->timing)
snprintf(t, sizeof(t), " timing %d", perflvl->timing->id);
- snprintf(ptr, len, "memory %dMHz%s%s%s%s%s\n", perflvl->memory / 1000,
- c, s, v, f, t);
+ snprintf(ptr, len, "%s%s%s%s%s%s\n", c, s, m, t, v, f);
}
static ssize_t
@@ -190,7 +210,7 @@
char *ptr = buf;
int len = PAGE_SIZE;
- snprintf(ptr, len, "%d: ", perflvl->id);
+ snprintf(ptr, len, "%d:", perflvl->id);
ptr += strlen(buf);
len -= strlen(buf);
@@ -211,9 +231,9 @@
if (!pm->cur)
snprintf(ptr, len, "setting: boot\n");
else if (pm->cur == &pm->boot)
- snprintf(ptr, len, "setting: boot\nc: ");
+ snprintf(ptr, len, "setting: boot\nc:");
else
- snprintf(ptr, len, "setting: static %d\nc: ", pm->cur->id);
+ snprintf(ptr, len, "setting: static %d\nc:", pm->cur->id);
ptr += strlen(buf);
len -= strlen(buf);
@@ -292,7 +312,7 @@
}
}
-#ifdef CONFIG_HWMON
+#if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE))
static ssize_t
nouveau_hwmon_show_temp(struct device *d, struct device_attribute *a, char *buf)
{
@@ -409,7 +429,7 @@
static int
nouveau_hwmon_init(struct drm_device *dev)
{
-#ifdef CONFIG_HWMON
+#if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE))
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
struct device *hwmon_dev;
@@ -442,7 +462,7 @@
static void
nouveau_hwmon_fini(struct drm_device *dev)
{
-#ifdef CONFIG_HWMON
+#if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE))
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
@@ -488,7 +508,7 @@
NV_INFO(dev, "%d available performance level(s)\n", pm->nr_perflvl);
for (i = 0; i < pm->nr_perflvl; i++) {
nouveau_pm_perflvl_info(&pm->perflvl[i], info, sizeof(info));
- NV_INFO(dev, "%d: %s", pm->perflvl[i].id, info);
+ NV_INFO(dev, "%d:%s", pm->perflvl[i].id, info);
}
/* determine current ("boot") performance level */
@@ -498,7 +518,7 @@
pm->cur = &pm->boot;
nouveau_pm_perflvl_info(&pm->boot, info, sizeof(info));
- NV_INFO(dev, "c: %s", info);
+ NV_INFO(dev, "c:%s", info);
}
/* switch performance levels now if requested */
diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.h b/drivers/gpu/drm/nouveau/nouveau_pm.h
index 4a9838dd..8ac02cd 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.h
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.h
@@ -52,6 +52,11 @@
u32 id, int khz);
void nv04_pm_clock_set(struct drm_device *, void *);
+/* nv40_pm.c */
+int nv40_pm_clocks_get(struct drm_device *, struct nouveau_pm_level *);
+void *nv40_pm_clocks_pre(struct drm_device *, struct nouveau_pm_level *);
+void nv40_pm_clocks_set(struct drm_device *, void *);
+
/* nv50_pm.c */
int nv50_pm_clock_get(struct drm_device *, u32 id);
void *nv50_pm_clock_pre(struct drm_device *, struct nouveau_pm_level *,
@@ -59,10 +64,12 @@
void nv50_pm_clock_set(struct drm_device *, void *);
/* nva3_pm.c */
-int nva3_pm_clock_get(struct drm_device *, u32 id);
-void *nva3_pm_clock_pre(struct drm_device *, struct nouveau_pm_level *,
- u32 id, int khz);
-void nva3_pm_clock_set(struct drm_device *, void *);
+int nva3_pm_clocks_get(struct drm_device *, struct nouveau_pm_level *);
+void *nva3_pm_clocks_pre(struct drm_device *, struct nouveau_pm_level *);
+void nva3_pm_clocks_set(struct drm_device *, void *);
+
+/* nvc0_pm.c */
+int nvc0_pm_clocks_get(struct drm_device *, struct nouveau_pm_level *);
/* nouveau_temp.c */
void nouveau_temp_init(struct drm_device *dev);
diff --git a/drivers/gpu/drm/nouveau/nouveau_reg.h b/drivers/gpu/drm/nouveau/nouveau_reg.h
index f18cdfc..43a96b9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_reg.h
+++ b/drivers/gpu/drm/nouveau/nouveau_reg.h
@@ -826,9 +826,12 @@
#define NV50_PDISPLAY_SOR_DPMS_STATE_ACTIVE 0x00030000
#define NV50_PDISPLAY_SOR_DPMS_STATE_BLANKED 0x00080000
#define NV50_PDISPLAY_SOR_DPMS_STATE_WAIT 0x10000000
-#define NV50_PDISPLAY_SOR_BACKLIGHT 0x0061c084
-#define NV50_PDISPLAY_SOR_BACKLIGHT_ENABLE 0x80000000
-#define NV50_PDISPLAY_SOR_BACKLIGHT_LEVEL 0x00000fff
+#define NV50_PDISP_SOR_PWM_DIV(i) (0x0061c080 + (i) * 0x800)
+#define NV50_PDISP_SOR_PWM_CTL(i) (0x0061c084 + (i) * 0x800)
+#define NV50_PDISP_SOR_PWM_CTL_NEW 0x80000000
+#define NVA3_PDISP_SOR_PWM_CTL_UNK 0x40000000
+#define NV50_PDISP_SOR_PWM_CTL_VAL 0x000007ff
+#define NVA3_PDISP_SOR_PWM_CTL_VAL 0x00ffffff
#define NV50_SOR_DP_CTRL(i, l) (0x0061c10c + (i) * 0x800 + (l) * 0x80)
#define NV50_SOR_DP_CTRL_ENABLED 0x00000001
#define NV50_SOR_DP_CTRL_ENHANCED_FRAME_ENABLED 0x00004000
@@ -843,7 +846,7 @@
#define NV50_SOR_DP_CTRL_TRAINING_PATTERN_2 0x02000000
#define NV50_SOR_DP_UNK118(i, l) (0x0061c118 + (i) * 0x800 + (l) * 0x80)
#define NV50_SOR_DP_UNK120(i, l) (0x0061c120 + (i) * 0x800 + (l) * 0x80)
-#define NV50_SOR_DP_UNK128(i, l) (0x0061c128 + (i) * 0x800 + (l) * 0x80)
+#define NV50_SOR_DP_SCFG(i, l) (0x0061c128 + (i) * 0x800 + (l) * 0x80)
#define NV50_SOR_DP_UNK130(i, l) (0x0061c130 + (i) * 0x800 + (l) * 0x80)
#define NV50_PDISPLAY_USER(i) ((i) * 0x1000 + 0x00640000)
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 2706cb3..b75258a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -12,8 +12,8 @@
struct drm_device *dev;
dma_addr_t *pages;
- bool *ttm_alloced;
unsigned nr_pages;
+ bool unmap_pages;
u64 offset;
bool bound;
@@ -26,43 +26,28 @@
{
struct nouveau_sgdma_be *nvbe = (struct nouveau_sgdma_be *)be;
struct drm_device *dev = nvbe->dev;
+ int i;
NV_DEBUG(nvbe->dev, "num_pages = %ld\n", num_pages);
- if (nvbe->pages)
- return -EINVAL;
+ nvbe->pages = dma_addrs;
+ nvbe->nr_pages = num_pages;
+ nvbe->unmap_pages = true;
- nvbe->pages = kmalloc(sizeof(dma_addr_t) * num_pages, GFP_KERNEL);
- if (!nvbe->pages)
- return -ENOMEM;
-
- nvbe->ttm_alloced = kmalloc(sizeof(bool) * num_pages, GFP_KERNEL);
- if (!nvbe->ttm_alloced) {
- kfree(nvbe->pages);
- nvbe->pages = NULL;
- return -ENOMEM;
+ /* this code path isn't called and is incorrect anyways */
+ if (0) { /* dma_addrs[0] != DMA_ERROR_CODE) { */
+ nvbe->unmap_pages = false;
+ return 0;
}
- nvbe->nr_pages = 0;
- while (num_pages--) {
- /* this code path isn't called and is incorrect anyways */
- if (0) { /*dma_addrs[nvbe->nr_pages] != DMA_ERROR_CODE)*/
- nvbe->pages[nvbe->nr_pages] =
- dma_addrs[nvbe->nr_pages];
- nvbe->ttm_alloced[nvbe->nr_pages] = true;
- } else {
- nvbe->pages[nvbe->nr_pages] =
- pci_map_page(dev->pdev, pages[nvbe->nr_pages], 0,
- PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(dev->pdev,
- nvbe->pages[nvbe->nr_pages])) {
- be->func->clear(be);
- return -EFAULT;
- }
- nvbe->ttm_alloced[nvbe->nr_pages] = false;
+ for (i = 0; i < num_pages; i++) {
+ nvbe->pages[i] = pci_map_page(dev->pdev, pages[i], 0,
+ PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
+ if (pci_dma_mapping_error(dev->pdev, nvbe->pages[i])) {
+ nvbe->nr_pages = --i;
+ be->func->clear(be);
+ return -EFAULT;
}
-
- nvbe->nr_pages++;
}
return 0;
@@ -72,25 +57,16 @@
nouveau_sgdma_clear(struct ttm_backend *be)
{
struct nouveau_sgdma_be *nvbe = (struct nouveau_sgdma_be *)be;
- struct drm_device *dev;
+ struct drm_device *dev = nvbe->dev;
- if (nvbe && nvbe->pages) {
- dev = nvbe->dev;
- NV_DEBUG(dev, "\n");
+ if (nvbe->bound)
+ be->func->unbind(be);
- if (nvbe->bound)
- be->func->unbind(be);
-
+ if (nvbe->unmap_pages) {
while (nvbe->nr_pages--) {
- if (!nvbe->ttm_alloced[nvbe->nr_pages])
- pci_unmap_page(dev->pdev, nvbe->pages[nvbe->nr_pages],
+ pci_unmap_page(dev->pdev, nvbe->pages[nvbe->nr_pages],
PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
}
- kfree(nvbe->pages);
- kfree(nvbe->ttm_alloced);
- nvbe->pages = NULL;
- nvbe->ttm_alloced = NULL;
- nvbe->nr_pages = 0;
}
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 10656e43..82478e0 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -286,9 +286,9 @@
engine->gpio.get = nv10_gpio_get;
engine->gpio.set = nv10_gpio_set;
engine->gpio.irq_enable = NULL;
- engine->pm.clock_get = nv04_pm_clock_get;
- engine->pm.clock_pre = nv04_pm_clock_pre;
- engine->pm.clock_set = nv04_pm_clock_set;
+ engine->pm.clocks_get = nv40_pm_clocks_get;
+ engine->pm.clocks_pre = nv40_pm_clocks_pre;
+ engine->pm.clocks_set = nv40_pm_clocks_set;
engine->pm.voltage_get = nouveau_voltage_gpio_get;
engine->pm.voltage_set = nouveau_voltage_gpio_set;
engine->pm.temp_get = nv40_temp_get;
@@ -299,7 +299,7 @@
case 0x50:
case 0x80: /* gotta love NVIDIA's consistency.. */
case 0x90:
- case 0xA0:
+ case 0xa0:
engine->instmem.init = nv50_instmem_init;
engine->instmem.takedown = nv50_instmem_takedown;
engine->instmem.suspend = nv50_instmem_suspend;
@@ -359,9 +359,9 @@
engine->pm.clock_set = nv50_pm_clock_set;
break;
default:
- engine->pm.clock_get = nva3_pm_clock_get;
- engine->pm.clock_pre = nva3_pm_clock_pre;
- engine->pm.clock_set = nva3_pm_clock_set;
+ engine->pm.clocks_get = nva3_pm_clocks_get;
+ engine->pm.clocks_pre = nva3_pm_clocks_pre;
+ engine->pm.clocks_set = nva3_pm_clocks_set;
break;
}
engine->pm.voltage_get = nouveau_voltage_gpio_get;
@@ -376,7 +376,7 @@
engine->vram.put = nv50_vram_del;
engine->vram.flags_valid = nv50_vram_flags_valid;
break;
- case 0xC0:
+ case 0xc0:
engine->instmem.init = nvc0_instmem_init;
engine->instmem.takedown = nvc0_instmem_takedown;
engine->instmem.suspend = nvc0_instmem_suspend;
@@ -422,12 +422,73 @@
engine->vram.put = nv50_vram_del;
engine->vram.flags_valid = nvc0_vram_flags_valid;
engine->pm.temp_get = nv84_temp_get;
+ engine->pm.clocks_get = nvc0_pm_clocks_get;
+ engine->pm.voltage_get = nouveau_voltage_gpio_get;
+ engine->pm.voltage_set = nouveau_voltage_gpio_set;
+ break;
+ case 0xd0:
+ engine->instmem.init = nvc0_instmem_init;
+ engine->instmem.takedown = nvc0_instmem_takedown;
+ engine->instmem.suspend = nvc0_instmem_suspend;
+ engine->instmem.resume = nvc0_instmem_resume;
+ engine->instmem.get = nv50_instmem_get;
+ engine->instmem.put = nv50_instmem_put;
+ engine->instmem.map = nv50_instmem_map;
+ engine->instmem.unmap = nv50_instmem_unmap;
+ engine->instmem.flush = nv84_instmem_flush;
+ engine->mc.init = nv50_mc_init;
+ engine->mc.takedown = nv50_mc_takedown;
+ engine->timer.init = nv04_timer_init;
+ engine->timer.read = nv04_timer_read;
+ engine->timer.takedown = nv04_timer_takedown;
+ engine->fb.init = nvc0_fb_init;
+ engine->fb.takedown = nvc0_fb_takedown;
+ engine->fifo.channels = 128;
+ engine->fifo.init = nvc0_fifo_init;
+ engine->fifo.takedown = nvc0_fifo_takedown;
+ engine->fifo.disable = nvc0_fifo_disable;
+ engine->fifo.enable = nvc0_fifo_enable;
+ engine->fifo.reassign = nvc0_fifo_reassign;
+ engine->fifo.channel_id = nvc0_fifo_channel_id;
+ engine->fifo.create_context = nvc0_fifo_create_context;
+ engine->fifo.destroy_context = nvc0_fifo_destroy_context;
+ engine->fifo.load_context = nvc0_fifo_load_context;
+ engine->fifo.unload_context = nvc0_fifo_unload_context;
+ engine->display.early_init = nouveau_stub_init;
+ engine->display.late_takedown = nouveau_stub_takedown;
+ engine->display.create = nvd0_display_create;
+ engine->display.init = nvd0_display_init;
+ engine->display.destroy = nvd0_display_destroy;
+ engine->gpio.init = nv50_gpio_init;
+ engine->gpio.takedown = nouveau_stub_takedown;
+ engine->gpio.get = nvd0_gpio_get;
+ engine->gpio.set = nvd0_gpio_set;
+ engine->gpio.irq_register = nv50_gpio_irq_register;
+ engine->gpio.irq_unregister = nv50_gpio_irq_unregister;
+ engine->gpio.irq_enable = nv50_gpio_irq_enable;
+ engine->vram.init = nvc0_vram_init;
+ engine->vram.takedown = nv50_vram_fini;
+ engine->vram.get = nvc0_vram_new;
+ engine->vram.put = nv50_vram_del;
+ engine->vram.flags_valid = nvc0_vram_flags_valid;
+ engine->pm.clocks_get = nvc0_pm_clocks_get;
+ engine->pm.voltage_get = nouveau_voltage_gpio_get;
+ engine->pm.voltage_set = nouveau_voltage_gpio_set;
break;
default:
NV_ERROR(dev, "NV%02x unsupported\n", dev_priv->chipset);
return 1;
}
+ /* headless mode */
+ if (nouveau_modeset == 2) {
+ engine->display.early_init = nouveau_stub_init;
+ engine->display.late_takedown = nouveau_stub_takedown;
+ engine->display.create = nouveau_stub_init;
+ engine->display.init = nouveau_stub_init;
+ engine->display.destroy = nouveau_stub_takedown;
+ }
+
return 0;
}
@@ -449,21 +510,6 @@
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
}
-static int
-nouveau_card_init_channel(struct drm_device *dev)
-{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- int ret;
-
- ret = nouveau_channel_alloc(dev, &dev_priv->channel, NULL,
- NvDmaFB, NvDmaTT);
- if (ret)
- return ret;
-
- mutex_unlock(&dev_priv->channel->mutex);
- return 0;
-}
-
static void nouveau_switcheroo_set_state(struct pci_dev *pdev,
enum vga_switcheroo_state state)
{
@@ -630,8 +676,11 @@
break;
}
- if (dev_priv->card_type == NV_40)
- nv40_mpeg_create(dev);
+ if (dev_priv->card_type == NV_40 ||
+ dev_priv->chipset == 0x31 ||
+ dev_priv->chipset == 0x34 ||
+ dev_priv->chipset == 0x36)
+ nv31_mpeg_create(dev);
else
if (dev_priv->card_type == NV_50 &&
(dev_priv->chipset < 0x98 || dev_priv->chipset == 0xa0))
@@ -651,41 +700,69 @@
goto out_engine;
}
- ret = engine->display.create(dev);
+ ret = nouveau_irq_init(dev);
if (ret)
goto out_fifo;
- ret = drm_vblank_init(dev, nv_two_heads(dev) ? 2 : 1);
- if (ret)
- goto out_vblank;
+ /* initialise general modesetting */
+ drm_mode_config_init(dev);
+ drm_mode_create_scaling_mode_property(dev);
+ drm_mode_create_dithering_property(dev);
+ dev->mode_config.funcs = (void *)&nouveau_mode_config_funcs;
+ dev->mode_config.fb_base = pci_resource_start(dev->pdev, 1);
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ if (dev_priv->card_type < NV_10) {
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+ } else
+ if (dev_priv->card_type < NV_50) {
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
+ } else {
+ dev->mode_config.max_width = 8192;
+ dev->mode_config.max_height = 8192;
+ }
- ret = nouveau_irq_init(dev);
+ ret = engine->display.create(dev);
if (ret)
- goto out_vblank;
+ goto out_irq;
- /* what about PVIDEO/PCRTC/PRAMDAC etc? */
+ nouveau_backlight_init(dev);
if (dev_priv->eng[NVOBJ_ENGINE_GR]) {
ret = nouveau_fence_init(dev);
if (ret)
- goto out_irq;
+ goto out_disp;
- ret = nouveau_card_init_channel(dev);
+ ret = nouveau_channel_alloc(dev, &dev_priv->channel, NULL,
+ NvDmaFB, NvDmaTT);
if (ret)
goto out_fence;
+
+ mutex_unlock(&dev_priv->channel->mutex);
}
- nouveau_fbcon_init(dev);
- drm_kms_helper_poll_init(dev);
+ if (dev->mode_config.num_crtc) {
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (ret)
+ goto out_chan;
+
+ nouveau_fbcon_init(dev);
+ drm_kms_helper_poll_init(dev);
+ }
+
return 0;
+out_chan:
+ nouveau_channel_put_unlocked(&dev_priv->channel);
out_fence:
nouveau_fence_fini(dev);
+out_disp:
+ nouveau_backlight_exit(dev);
+ engine->display.destroy(dev);
out_irq:
nouveau_irq_fini(dev);
-out_vblank:
- drm_vblank_cleanup(dev);
- engine->display.destroy(dev);
out_fifo:
if (!dev_priv->noaccel)
engine->fifo.takedown(dev);
@@ -732,15 +809,20 @@
struct nouveau_engine *engine = &dev_priv->engine;
int e;
- drm_kms_helper_poll_fini(dev);
- nouveau_fbcon_fini(dev);
+ if (dev->mode_config.num_crtc) {
+ drm_kms_helper_poll_fini(dev);
+ nouveau_fbcon_fini(dev);
+ drm_vblank_cleanup(dev);
+ }
if (dev_priv->channel) {
nouveau_channel_put_unlocked(&dev_priv->channel);
nouveau_fence_fini(dev);
}
+ nouveau_backlight_exit(dev);
engine->display.destroy(dev);
+ drm_mode_config_cleanup(dev);
if (!dev_priv->noaccel) {
engine->fifo.takedown(dev);
@@ -774,7 +856,6 @@
engine->vram.takedown(dev);
nouveau_irq_fini(dev);
- drm_vblank_cleanup(dev);
nouveau_pm_fini(dev);
nouveau_bios_takedown(dev);
@@ -907,7 +988,7 @@
int nouveau_load(struct drm_device *dev, unsigned long flags)
{
struct drm_nouveau_private *dev_priv;
- uint32_t reg0;
+ uint32_t reg0, strap;
resource_size_t mmio_start_offs;
int ret;
@@ -951,13 +1032,11 @@
/* Time to determine the card architecture */
reg0 = nv_rd32(dev, NV03_PMC_BOOT_0);
- dev_priv->stepping = 0; /* XXX: add stepping for pre-NV10? */
/* We're dealing with >=NV10 */
if ((reg0 & 0x0f000000) > 0) {
/* Bit 27-20 contain the architecture in hex */
dev_priv->chipset = (reg0 & 0xff00000) >> 20;
- dev_priv->stepping = (reg0 & 0xff);
/* NV04 or NV05 */
} else if ((reg0 & 0xff00fff0) == 0x20004000) {
if (reg0 & 0x00f00000)
@@ -987,6 +1066,9 @@
case 0xc0:
dev_priv->card_type = NV_C0;
break;
+ case 0xd0:
+ dev_priv->card_type = NV_D0;
+ break;
default:
NV_INFO(dev, "Unsupported chipset 0x%08x\n", reg0);
ret = -EINVAL;
@@ -996,6 +1078,23 @@
NV_INFO(dev, "Detected an NV%2x generation card (0x%08x)\n",
dev_priv->card_type, reg0);
+ /* determine frequency of timing crystal */
+ strap = nv_rd32(dev, 0x101000);
+ if ( dev_priv->chipset < 0x17 ||
+ (dev_priv->chipset >= 0x20 && dev_priv->chipset <= 0x25))
+ strap &= 0x00000040;
+ else
+ strap &= 0x00400040;
+
+ switch (strap) {
+ case 0x00000000: dev_priv->crystal = 13500; break;
+ case 0x00000040: dev_priv->crystal = 14318; break;
+ case 0x00400000: dev_priv->crystal = 27000; break;
+ case 0x00400040: dev_priv->crystal = 25000; break;
+ }
+
+ NV_DEBUG(dev, "crystal freq: %dKHz\n", dev_priv->crystal);
+
/* Determine whether we'll attempt acceleration or not, some
* cards are disabled by default here due to them being known
* non-functional, or never been tested due to lack of hw.
@@ -1030,7 +1129,7 @@
ioremap(pci_resource_start(dev->pdev, ramin_bar),
dev_priv->ramin_size);
if (!dev_priv->ramin) {
- NV_ERROR(dev, "Failed to PRAMIN BAR");
+ NV_ERROR(dev, "Failed to map PRAMIN BAR\n");
ret = -ENOMEM;
goto err_mmio;
}
@@ -1130,7 +1229,7 @@
getparam->value = 1;
break;
case NOUVEAU_GETPARAM_HAS_PAGEFLIP:
- getparam->value = 1;
+ getparam->value = dev_priv->card_type < NV_D0;
break;
case NOUVEAU_GETPARAM_GRAPH_UNITS:
/* NV40 and NV50 versions are quite different, but register
@@ -1198,6 +1297,23 @@
return false;
}
+/* Wait until cond(data) == true, up until timeout has hit */
+bool
+nouveau_wait_cb(struct drm_device *dev, u64 timeout,
+ bool (*cond)(void *), void *data)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+ u64 start = ptimer->read(dev);
+
+ do {
+ if (cond(data) == true)
+ return true;
+ } while (ptimer->read(dev) - start < timeout);
+
+ return false;
+}
+
/* Waits for PGRAPH to go completely idle */
bool nouveau_wait_for_idle(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/nouveau/nouveau_vm.c b/drivers/gpu/drm/nouveau/nouveau_vm.c
index 244fd38..ef0832b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_vm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_vm.c
@@ -172,9 +172,9 @@
vm->map_pgt(vpgd->obj, pde, vpgt->obj);
}
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
nouveau_gpuobj_ref(NULL, &pgt);
- mutex_lock(&vm->mm->mutex);
+ mutex_lock(&vm->mm.mutex);
}
}
@@ -191,18 +191,18 @@
pgt_size = (1 << (vm->pgt_bits + 12)) >> type;
pgt_size *= 8;
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
ret = nouveau_gpuobj_new(vm->dev, NULL, pgt_size, 0x1000,
NVOBJ_FLAG_ZERO_ALLOC, &pgt);
- mutex_lock(&vm->mm->mutex);
+ mutex_lock(&vm->mm.mutex);
if (unlikely(ret))
return ret;
/* someone beat us to filling the PDE while we didn't have the lock */
if (unlikely(vpgt->refcount[big]++)) {
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
nouveau_gpuobj_ref(NULL, &pgt);
- mutex_lock(&vm->mm->mutex);
+ mutex_lock(&vm->mm.mutex);
return 0;
}
@@ -223,10 +223,10 @@
u32 fpde, lpde, pde;
int ret;
- mutex_lock(&vm->mm->mutex);
- ret = nouveau_mm_get(vm->mm, page_shift, msize, 0, align, &vma->node);
+ mutex_lock(&vm->mm.mutex);
+ ret = nouveau_mm_get(&vm->mm, page_shift, msize, 0, align, &vma->node);
if (unlikely(ret != 0)) {
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
return ret;
}
@@ -245,13 +245,13 @@
if (ret) {
if (pde != fpde)
nouveau_vm_unmap_pgt(vm, big, fpde, pde - 1);
- nouveau_mm_put(vm->mm, vma->node);
- mutex_unlock(&vm->mm->mutex);
+ nouveau_mm_put(&vm->mm, vma->node);
+ mutex_unlock(&vm->mm.mutex);
vma->node = NULL;
return ret;
}
}
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
vma->vm = vm;
vma->offset = (u64)vma->node->offset << 12;
@@ -270,11 +270,11 @@
fpde = (vma->node->offset >> vm->pgt_bits);
lpde = (vma->node->offset + vma->node->length - 1) >> vm->pgt_bits;
- mutex_lock(&vm->mm->mutex);
+ mutex_lock(&vm->mm.mutex);
nouveau_vm_unmap_pgt(vm, vma->node->type != vm->spg_shift, fpde, lpde);
- nouveau_mm_put(vm->mm, vma->node);
+ nouveau_mm_put(&vm->mm, vma->node);
vma->node = NULL;
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
}
int
@@ -306,7 +306,7 @@
block = length;
} else
- if (dev_priv->card_type == NV_C0) {
+ if (dev_priv->card_type >= NV_C0) {
vm->map_pgt = nvc0_vm_map_pgt;
vm->map = nvc0_vm_map;
vm->map_sg = nvc0_vm_map_sg;
@@ -360,11 +360,11 @@
nouveau_gpuobj_ref(pgd, &vpgd->obj);
- mutex_lock(&vm->mm->mutex);
+ mutex_lock(&vm->mm.mutex);
for (i = vm->fpde; i <= vm->lpde; i++)
vm->map_pgt(pgd, i, vm->pgt[i - vm->fpde].obj);
list_add(&vpgd->head, &vm->pgd_list);
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
return 0;
}
@@ -377,7 +377,7 @@
if (!mpgd)
return;
- mutex_lock(&vm->mm->mutex);
+ mutex_lock(&vm->mm.mutex);
list_for_each_entry_safe(vpgd, tmp, &vm->pgd_list, head) {
if (vpgd->obj == mpgd) {
pgd = vpgd->obj;
@@ -386,7 +386,7 @@
break;
}
}
- mutex_unlock(&vm->mm->mutex);
+ mutex_unlock(&vm->mm.mutex);
nouveau_gpuobj_ref(NULL, &pgd);
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_vm.h b/drivers/gpu/drm/nouveau/nouveau_vm.h
index 579ca8c..6ce995f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_vm.h
+++ b/drivers/gpu/drm/nouveau/nouveau_vm.h
@@ -51,7 +51,7 @@
struct nouveau_vm {
struct drm_device *dev;
- struct nouveau_mm *mm;
+ struct nouveau_mm mm;
int refcount;
struct list_head pgd_list;
diff --git a/drivers/gpu/drm/nouveau/nouveau_volt.c b/drivers/gpu/drm/nouveau/nouveau_volt.c
index 75e87274..86d03e1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_volt.c
+++ b/drivers/gpu/drm/nouveau/nouveau_volt.c
@@ -27,7 +27,7 @@
#include "nouveau_drv.h"
#include "nouveau_pm.h"
-static const enum dcb_gpio_tag vidtag[] = { 0x04, 0x05, 0x06, 0x1a };
+static const enum dcb_gpio_tag vidtag[] = { 0x04, 0x05, 0x06, 0x1a, 0x73 };
static int nr_vidtag = sizeof(vidtag) / sizeof(vidtag[0]);
int
@@ -170,6 +170,13 @@
*/
vidshift = 2;
break;
+ case 0x40:
+ headerlen = volt[1];
+ recordlen = volt[2];
+ entries = volt[3]; /* not a clue what the entries are for.. */
+ vidmask = volt[11]; /* guess.. */
+ vidshift = 0;
+ break;
default:
NV_WARN(dev, "voltage table 0x%02x unknown\n", volt[0]);
return;
@@ -197,16 +204,37 @@
}
/* parse vbios entries into common format */
- voltage->level = kcalloc(entries, sizeof(*voltage->level), GFP_KERNEL);
- if (!voltage->level)
- return;
+ voltage->version = volt[0];
+ if (voltage->version < 0x40) {
+ voltage->nr_level = entries;
+ voltage->level =
+ kcalloc(entries, sizeof(*voltage->level), GFP_KERNEL);
+ if (!voltage->level)
+ return;
- entry = volt + headerlen;
- for (i = 0; i < entries; i++, entry += recordlen) {
- voltage->level[i].voltage = entry[0];
- voltage->level[i].vid = entry[1] >> vidshift;
+ entry = volt + headerlen;
+ for (i = 0; i < entries; i++, entry += recordlen) {
+ voltage->level[i].voltage = entry[0] * 10000;
+ voltage->level[i].vid = entry[1] >> vidshift;
+ }
+ } else {
+ u32 volt_uv = ROM32(volt[4]);
+ s16 step_uv = ROM16(volt[8]);
+ u8 vid;
+
+ voltage->nr_level = voltage->vid_mask + 1;
+ voltage->level = kcalloc(voltage->nr_level,
+ sizeof(*voltage->level), GFP_KERNEL);
+ if (!voltage->level)
+ return;
+
+ for (vid = 0; vid <= voltage->vid_mask; vid++) {
+ voltage->level[vid].voltage = volt_uv;
+ voltage->level[vid].vid = vid;
+ volt_uv += step_uv;
+ }
}
- voltage->nr_level = entries;
+
voltage->supported = true;
}
diff --git a/drivers/gpu/drm/nouveau/nv04_display.c b/drivers/gpu/drm/nouveau/nv04_display.c
index 1715e14..6bd8518 100644
--- a/drivers/gpu/drm/nouveau/nv04_display.c
+++ b/drivers/gpu/drm/nouveau/nv04_display.c
@@ -126,27 +126,6 @@
nouveau_hw_save_vga_fonts(dev, 1);
- drm_mode_config_init(dev);
- drm_mode_create_scaling_mode_property(dev);
- drm_mode_create_dithering_property(dev);
-
- dev->mode_config.funcs = (void *)&nouveau_mode_config_funcs;
-
- dev->mode_config.min_width = 0;
- dev->mode_config.min_height = 0;
- switch (dev_priv->card_type) {
- case NV_04:
- dev->mode_config.max_width = 2048;
- dev->mode_config.max_height = 2048;
- break;
- default:
- dev->mode_config.max_width = 4096;
- dev->mode_config.max_height = 4096;
- break;
- }
-
- dev->mode_config.fb_base = dev_priv->fb_phys;
-
nv04_crtc_create(dev, 0);
if (nv_two_heads(dev))
nv04_crtc_create(dev, 1);
@@ -235,8 +214,6 @@
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
crtc->funcs->restore(crtc);
- drm_mode_config_cleanup(dev);
-
nouveau_hw_save_vga_fonts(dev, 0);
}
diff --git a/drivers/gpu/drm/nouveau/nv04_pm.c b/drivers/gpu/drm/nouveau/nv04_pm.c
index eb1c70d..9ae92a8 100644
--- a/drivers/gpu/drm/nouveau/nv04_pm.c
+++ b/drivers/gpu/drm/nouveau/nv04_pm.c
@@ -68,6 +68,7 @@
nv04_pm_clock_set(struct drm_device *dev, void *pre_state)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
struct nv04_pm_state *state = pre_state;
u32 reg = state->pll.reg;
@@ -85,6 +86,9 @@
nv_mask(dev, 0x1002c0, 0, 1 << 8);
}
+ if (reg == NV_PRAMDAC_NVPLL_COEFF)
+ ptimer->init(dev);
+
kfree(state);
}
diff --git a/drivers/gpu/drm/nouveau/nv04_timer.c b/drivers/gpu/drm/nouveau/nv04_timer.c
index 1d09ddd..263301b 100644
--- a/drivers/gpu/drm/nouveau/nv04_timer.c
+++ b/drivers/gpu/drm/nouveau/nv04_timer.c
@@ -6,43 +6,75 @@
int
nv04_timer_init(struct drm_device *dev)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ u32 m, n, d;
+
nv_wr32(dev, NV04_PTIMER_INTR_EN_0, 0x00000000);
nv_wr32(dev, NV04_PTIMER_INTR_0, 0xFFFFFFFF);
- /* Just use the pre-existing values when possible for now; these regs
- * are not written in nv (driver writer missed a /4 on the address), and
- * writing 8 and 3 to the correct regs breaks the timings on the LVDS
- * hardware sequencing microcode.
- * A correct solution (involving calculations with the GPU PLL) can
- * be done when kernel modesetting lands
- */
- if (!nv_rd32(dev, NV04_PTIMER_NUMERATOR) ||
- !nv_rd32(dev, NV04_PTIMER_DENOMINATOR)) {
- nv_wr32(dev, NV04_PTIMER_NUMERATOR, 0x00000008);
- nv_wr32(dev, NV04_PTIMER_DENOMINATOR, 0x00000003);
+ /* aim for 31.25MHz, which gives us nanosecond timestamps */
+ d = 1000000 / 32;
+
+ /* determine base clock for timer source */
+ if (dev_priv->chipset < 0x40) {
+ n = dev_priv->engine.pm.clock_get(dev, PLL_CORE);
+ } else
+ if (dev_priv->chipset == 0x40) {
+ /*XXX: figure this out */
+ n = 0;
+ } else {
+ n = dev_priv->crystal;
+ m = 1;
+ while (n < (d * 2)) {
+ n += (n / m);
+ m++;
+ }
+
+ nv_wr32(dev, 0x009220, m - 1);
}
+ if (!n) {
+ NV_WARN(dev, "PTIMER: unknown input clock freq\n");
+ if (!nv_rd32(dev, NV04_PTIMER_NUMERATOR) ||
+ !nv_rd32(dev, NV04_PTIMER_DENOMINATOR)) {
+ nv_wr32(dev, NV04_PTIMER_NUMERATOR, 1);
+ nv_wr32(dev, NV04_PTIMER_DENOMINATOR, 1);
+ }
+ return 0;
+ }
+
+ /* reduce ratio to acceptable values */
+ while (((n % 5) == 0) && ((d % 5) == 0)) {
+ n /= 5;
+ d /= 5;
+ }
+
+ while (((n % 2) == 0) && ((d % 2) == 0)) {
+ n /= 2;
+ d /= 2;
+ }
+
+ while (n > 0xffff || d > 0xffff) {
+ n >>= 1;
+ d >>= 1;
+ }
+
+ nv_wr32(dev, NV04_PTIMER_NUMERATOR, n);
+ nv_wr32(dev, NV04_PTIMER_DENOMINATOR, d);
return 0;
}
-uint64_t
+u64
nv04_timer_read(struct drm_device *dev)
{
- uint32_t low;
- /* From kmmio dumps on nv28 this looks like how the blob does this.
- * It reads the high dword twice, before and after.
- * The only explanation seems to be that the 64-bit timer counter
- * advances between high and low dword reads and may corrupt the
- * result. Not confirmed.
- */
- uint32_t high2 = nv_rd32(dev, NV04_PTIMER_TIME_1);
- uint32_t high1;
+ u32 hi, lo;
+
do {
- high1 = high2;
- low = nv_rd32(dev, NV04_PTIMER_TIME_0);
- high2 = nv_rd32(dev, NV04_PTIMER_TIME_1);
- } while (high1 != high2);
- return (((uint64_t)high2) << 32) | (uint64_t)low;
+ hi = nv_rd32(dev, NV04_PTIMER_TIME_1);
+ lo = nv_rd32(dev, NV04_PTIMER_TIME_0);
+ } while (hi != nv_rd32(dev, NV04_PTIMER_TIME_1));
+
+ return ((u64)hi << 32 | lo);
}
void
diff --git a/drivers/gpu/drm/nouveau/nv31_mpeg.c b/drivers/gpu/drm/nouveau/nv31_mpeg.c
new file mode 100644
index 0000000..6f06a07
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nv31_mpeg.c
@@ -0,0 +1,344 @@
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+#include "nouveau_drv.h"
+#include "nouveau_ramht.h"
+
+struct nv31_mpeg_engine {
+ struct nouveau_exec_engine base;
+ atomic_t refcount;
+};
+
+
+static int
+nv31_mpeg_context_new(struct nouveau_channel *chan, int engine)
+{
+ struct nv31_mpeg_engine *pmpeg = nv_engine(chan->dev, engine);
+
+ if (!atomic_add_unless(&pmpeg->refcount, 1, 1))
+ return -EBUSY;
+
+ chan->engctx[engine] = (void *)0xdeadcafe;
+ return 0;
+}
+
+static void
+nv31_mpeg_context_del(struct nouveau_channel *chan, int engine)
+{
+ struct nv31_mpeg_engine *pmpeg = nv_engine(chan->dev, engine);
+ atomic_dec(&pmpeg->refcount);
+ chan->engctx[engine] = NULL;
+}
+
+static int
+nv40_mpeg_context_new(struct nouveau_channel *chan, int engine)
+{
+ struct drm_device *dev = chan->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_gpuobj *ctx = NULL;
+ unsigned long flags;
+ int ret;
+
+ NV_DEBUG(dev, "ch%d\n", chan->id);
+
+ ret = nouveau_gpuobj_new(dev, NULL, 264 * 4, 16, NVOBJ_FLAG_ZERO_ALLOC |
+ NVOBJ_FLAG_ZERO_FREE, &ctx);
+ if (ret)
+ return ret;
+
+ nv_wo32(ctx, 0x78, 0x02001ec1);
+
+ spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
+ nv_mask(dev, 0x002500, 0x00000001, 0x00000000);
+ if ((nv_rd32(dev, 0x003204) & 0x1f) == chan->id)
+ nv_wr32(dev, 0x00330c, ctx->pinst >> 4);
+ nv_wo32(chan->ramfc, 0x54, ctx->pinst >> 4);
+ nv_mask(dev, 0x002500, 0x00000001, 0x00000001);
+ spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
+
+ chan->engctx[engine] = ctx;
+ return 0;
+}
+
+static void
+nv40_mpeg_context_del(struct nouveau_channel *chan, int engine)
+{
+ struct drm_nouveau_private *dev_priv = chan->dev->dev_private;
+ struct nouveau_gpuobj *ctx = chan->engctx[engine];
+ struct drm_device *dev = chan->dev;
+ unsigned long flags;
+ u32 inst = 0x80000000 | (ctx->pinst >> 4);
+
+ spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
+ nv_mask(dev, 0x00b32c, 0x00000001, 0x00000000);
+ if (nv_rd32(dev, 0x00b318) == inst)
+ nv_mask(dev, 0x00b318, 0x80000000, 0x00000000);
+ nv_mask(dev, 0x00b32c, 0x00000001, 0x00000001);
+ spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
+
+ nouveau_gpuobj_ref(NULL, &ctx);
+ chan->engctx[engine] = NULL;
+}
+
+static int
+nv31_mpeg_object_new(struct nouveau_channel *chan, int engine,
+ u32 handle, u16 class)
+{
+ struct drm_device *dev = chan->dev;
+ struct nouveau_gpuobj *obj = NULL;
+ int ret;
+
+ ret = nouveau_gpuobj_new(dev, chan, 20, 16, NVOBJ_FLAG_ZERO_ALLOC |
+ NVOBJ_FLAG_ZERO_FREE, &obj);
+ if (ret)
+ return ret;
+ obj->engine = 2;
+ obj->class = class;
+
+ nv_wo32(obj, 0x00, class);
+
+ ret = nouveau_ramht_insert(chan, handle, obj);
+ nouveau_gpuobj_ref(NULL, &obj);
+ return ret;
+}
+
+static int
+nv31_mpeg_init(struct drm_device *dev, int engine)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nv31_mpeg_engine *pmpeg = nv_engine(dev, engine);
+ int i;
+
+ /* VPE init */
+ nv_mask(dev, 0x000200, 0x00000002, 0x00000000);
+ nv_mask(dev, 0x000200, 0x00000002, 0x00000002);
+ nv_wr32(dev, 0x00b0e0, 0x00000020); /* nvidia: rd 0x01, wr 0x20 */
+ nv_wr32(dev, 0x00b0e8, 0x00000020); /* nvidia: rd 0x01, wr 0x20 */
+
+ for (i = 0; i < dev_priv->engine.fb.num_tiles; i++)
+ pmpeg->base.set_tile_region(dev, i);
+
+ /* PMPEG init */
+ nv_wr32(dev, 0x00b32c, 0x00000000);
+ nv_wr32(dev, 0x00b314, 0x00000100);
+ nv_wr32(dev, 0x00b220, nv44_graph_class(dev) ? 0x00000044 : 0x00000031);
+ nv_wr32(dev, 0x00b300, 0x02001ec1);
+ nv_mask(dev, 0x00b32c, 0x00000001, 0x00000001);
+
+ nv_wr32(dev, 0x00b100, 0xffffffff);
+ nv_wr32(dev, 0x00b140, 0xffffffff);
+
+ if (!nv_wait(dev, 0x00b200, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "PMPEG init: 0x%08x\n", nv_rd32(dev, 0x00b200));
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int
+nv31_mpeg_fini(struct drm_device *dev, int engine, bool suspend)
+{
+ /*XXX: context save? */
+ nv_mask(dev, 0x00b32c, 0x00000001, 0x00000000);
+ nv_wr32(dev, 0x00b140, 0x00000000);
+ return 0;
+}
+
+static int
+nv31_mpeg_mthd_dma(struct nouveau_channel *chan, u32 class, u32 mthd, u32 data)
+{
+ struct drm_device *dev = chan->dev;
+ u32 inst = data << 4;
+ u32 dma0 = nv_ri32(dev, inst + 0);
+ u32 dma1 = nv_ri32(dev, inst + 4);
+ u32 dma2 = nv_ri32(dev, inst + 8);
+ u32 base = (dma2 & 0xfffff000) | (dma0 >> 20);
+ u32 size = dma1 + 1;
+
+ /* only allow linear DMA objects */
+ if (!(dma0 & 0x00002000))
+ return -EINVAL;
+
+ if (mthd == 0x0190) {
+ /* DMA_CMD */
+ nv_mask(dev, 0x00b300, 0x00030000, (dma0 & 0x00030000));
+ nv_wr32(dev, 0x00b334, base);
+ nv_wr32(dev, 0x00b324, size);
+ } else
+ if (mthd == 0x01a0) {
+ /* DMA_DATA */
+ nv_mask(dev, 0x00b300, 0x000c0000, (dma0 & 0x00030000) << 2);
+ nv_wr32(dev, 0x00b360, base);
+ nv_wr32(dev, 0x00b364, size);
+ } else {
+ /* DMA_IMAGE, VRAM only */
+ if (dma0 & 0x000c0000)
+ return -EINVAL;
+
+ nv_wr32(dev, 0x00b370, base);
+ nv_wr32(dev, 0x00b374, size);
+ }
+
+ return 0;
+}
+
+static int
+nv31_mpeg_isr_chid(struct drm_device *dev, u32 inst)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_gpuobj *ctx;
+ unsigned long flags;
+ int i;
+
+ /* hardcode drm channel id on nv3x, so swmthd lookup works */
+ if (dev_priv->card_type < NV_40)
+ return 0;
+
+ spin_lock_irqsave(&dev_priv->channels.lock, flags);
+ for (i = 0; i < dev_priv->engine.fifo.channels; i++) {
+ if (!dev_priv->channels.ptr[i])
+ continue;
+
+ ctx = dev_priv->channels.ptr[i]->engctx[NVOBJ_ENGINE_MPEG];
+ if (ctx && ctx->pinst == inst)
+ break;
+ }
+ spin_unlock_irqrestore(&dev_priv->channels.lock, flags);
+ return i;
+}
+
+static void
+nv31_vpe_set_tile_region(struct drm_device *dev, int i)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_tile_reg *tile = &dev_priv->tile.reg[i];
+
+ nv_wr32(dev, 0x00b008 + (i * 0x10), tile->pitch);
+ nv_wr32(dev, 0x00b004 + (i * 0x10), tile->limit);
+ nv_wr32(dev, 0x00b000 + (i * 0x10), tile->addr);
+}
+
+static void
+nv31_mpeg_isr(struct drm_device *dev)
+{
+ u32 inst = (nv_rd32(dev, 0x00b318) & 0x000fffff) << 4;
+ u32 chid = nv31_mpeg_isr_chid(dev, inst);
+ u32 stat = nv_rd32(dev, 0x00b100);
+ u32 type = nv_rd32(dev, 0x00b230);
+ u32 mthd = nv_rd32(dev, 0x00b234);
+ u32 data = nv_rd32(dev, 0x00b238);
+ u32 show = stat;
+
+ if (stat & 0x01000000) {
+ /* happens on initial binding of the object */
+ if (type == 0x00000020 && mthd == 0x0000) {
+ nv_mask(dev, 0x00b308, 0x00000000, 0x00000000);
+ show &= ~0x01000000;
+ }
+
+ if (type == 0x00000010) {
+ if (!nouveau_gpuobj_mthd_call2(dev, chid, 0x3174, mthd, data))
+ show &= ~0x01000000;
+ }
+ }
+
+ nv_wr32(dev, 0x00b100, stat);
+ nv_wr32(dev, 0x00b230, 0x00000001);
+
+ if (show && nouveau_ratelimit()) {
+ NV_INFO(dev, "PMPEG: Ch %d [0x%08x] 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ chid, inst, stat, type, mthd, data);
+ }
+}
+
+static void
+nv31_vpe_isr(struct drm_device *dev)
+{
+ if (nv_rd32(dev, 0x00b100))
+ nv31_mpeg_isr(dev);
+
+ if (nv_rd32(dev, 0x00b800)) {
+ u32 stat = nv_rd32(dev, 0x00b800);
+ NV_INFO(dev, "PMSRCH: 0x%08x\n", stat);
+ nv_wr32(dev, 0xb800, stat);
+ }
+}
+
+static void
+nv31_mpeg_destroy(struct drm_device *dev, int engine)
+{
+ struct nv31_mpeg_engine *pmpeg = nv_engine(dev, engine);
+
+ nouveau_irq_unregister(dev, 0);
+
+ NVOBJ_ENGINE_DEL(dev, MPEG);
+ kfree(pmpeg);
+}
+
+int
+nv31_mpeg_create(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nv31_mpeg_engine *pmpeg;
+
+ pmpeg = kzalloc(sizeof(*pmpeg), GFP_KERNEL);
+ if (!pmpeg)
+ return -ENOMEM;
+ atomic_set(&pmpeg->refcount, 0);
+
+ pmpeg->base.destroy = nv31_mpeg_destroy;
+ pmpeg->base.init = nv31_mpeg_init;
+ pmpeg->base.fini = nv31_mpeg_fini;
+ if (dev_priv->card_type < NV_40) {
+ pmpeg->base.context_new = nv31_mpeg_context_new;
+ pmpeg->base.context_del = nv31_mpeg_context_del;
+ } else {
+ pmpeg->base.context_new = nv40_mpeg_context_new;
+ pmpeg->base.context_del = nv40_mpeg_context_del;
+ }
+ pmpeg->base.object_new = nv31_mpeg_object_new;
+
+ /* ISR vector, PMC_ENABLE bit, and TILE regs are shared between
+ * all VPE engines, for this driver's purposes the PMPEG engine
+ * will be treated as the "master" and handle the global VPE
+ * bits too
+ */
+ pmpeg->base.set_tile_region = nv31_vpe_set_tile_region;
+ nouveau_irq_register(dev, 0, nv31_vpe_isr);
+
+ NVOBJ_ENGINE_ADD(dev, MPEG, &pmpeg->base);
+ NVOBJ_CLASS(dev, 0x3174, MPEG);
+ NVOBJ_MTHD (dev, 0x3174, 0x0190, nv31_mpeg_mthd_dma);
+ NVOBJ_MTHD (dev, 0x3174, 0x01a0, nv31_mpeg_mthd_dma);
+ NVOBJ_MTHD (dev, 0x3174, 0x01b0, nv31_mpeg_mthd_dma);
+
+#if 0
+ NVOBJ_ENGINE_ADD(dev, ME, &pme->base);
+ NVOBJ_CLASS(dev, 0x4075, ME);
+#endif
+ return 0;
+
+}
diff --git a/drivers/gpu/drm/nouveau/nv40_mpeg.c b/drivers/gpu/drm/nouveau/nv40_mpeg.c
deleted file mode 100644
index ad03a0e..0000000
--- a/drivers/gpu/drm/nouveau/nv40_mpeg.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * Copyright 2011 Red Hat Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: Ben Skeggs
- */
-
-#include "drmP.h"
-#include "nouveau_drv.h"
-#include "nouveau_ramht.h"
-
-struct nv40_mpeg_engine {
- struct nouveau_exec_engine base;
-};
-
-static int
-nv40_mpeg_context_new(struct nouveau_channel *chan, int engine)
-{
- struct drm_device *dev = chan->dev;
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_gpuobj *ctx = NULL;
- unsigned long flags;
- int ret;
-
- NV_DEBUG(dev, "ch%d\n", chan->id);
-
- ret = nouveau_gpuobj_new(dev, NULL, 264 * 4, 16, NVOBJ_FLAG_ZERO_ALLOC |
- NVOBJ_FLAG_ZERO_FREE, &ctx);
- if (ret)
- return ret;
-
- nv_wo32(ctx, 0x78, 0x02001ec1);
-
- spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
- nv_mask(dev, 0x002500, 0x00000001, 0x00000000);
- if ((nv_rd32(dev, 0x003204) & 0x1f) == chan->id)
- nv_wr32(dev, 0x00330c, ctx->pinst >> 4);
- nv_wo32(chan->ramfc, 0x54, ctx->pinst >> 4);
- nv_mask(dev, 0x002500, 0x00000001, 0x00000001);
- spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
-
- chan->engctx[engine] = ctx;
- return 0;
-}
-
-static void
-nv40_mpeg_context_del(struct nouveau_channel *chan, int engine)
-{
- struct drm_nouveau_private *dev_priv = chan->dev->dev_private;
- struct nouveau_gpuobj *ctx = chan->engctx[engine];
- struct drm_device *dev = chan->dev;
- unsigned long flags;
- u32 inst = 0x80000000 | (ctx->pinst >> 4);
-
- spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
- nv_mask(dev, 0x00b32c, 0x00000001, 0x00000000);
- if (nv_rd32(dev, 0x00b318) == inst)
- nv_mask(dev, 0x00b318, 0x80000000, 0x00000000);
- nv_mask(dev, 0x00b32c, 0x00000001, 0x00000001);
- spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
-
- nouveau_gpuobj_ref(NULL, &ctx);
- chan->engctx[engine] = NULL;
-}
-
-static int
-nv40_mpeg_object_new(struct nouveau_channel *chan, int engine,
- u32 handle, u16 class)
-{
- struct drm_device *dev = chan->dev;
- struct nouveau_gpuobj *obj = NULL;
- int ret;
-
- ret = nouveau_gpuobj_new(dev, chan, 20, 16, NVOBJ_FLAG_ZERO_ALLOC |
- NVOBJ_FLAG_ZERO_FREE, &obj);
- if (ret)
- return ret;
- obj->engine = 2;
- obj->class = class;
-
- nv_wo32(obj, 0x00, class);
-
- ret = nouveau_ramht_insert(chan, handle, obj);
- nouveau_gpuobj_ref(NULL, &obj);
- return ret;
-}
-
-static int
-nv40_mpeg_init(struct drm_device *dev, int engine)
-{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nv40_mpeg_engine *pmpeg = nv_engine(dev, engine);
- int i;
-
- /* VPE init */
- nv_mask(dev, 0x000200, 0x00000002, 0x00000000);
- nv_mask(dev, 0x000200, 0x00000002, 0x00000002);
- nv_wr32(dev, 0x00b0e0, 0x00000020); /* nvidia: rd 0x01, wr 0x20 */
- nv_wr32(dev, 0x00b0e8, 0x00000020); /* nvidia: rd 0x01, wr 0x20 */
-
- for (i = 0; i < dev_priv->engine.fb.num_tiles; i++)
- pmpeg->base.set_tile_region(dev, i);
-
- /* PMPEG init */
- nv_wr32(dev, 0x00b32c, 0x00000000);
- nv_wr32(dev, 0x00b314, 0x00000100);
- nv_wr32(dev, 0x00b220, 0x00000044);
- nv_wr32(dev, 0x00b300, 0x02001ec1);
- nv_mask(dev, 0x00b32c, 0x00000001, 0x00000001);
-
- nv_wr32(dev, 0x00b100, 0xffffffff);
- nv_wr32(dev, 0x00b140, 0xffffffff);
-
- if (!nv_wait(dev, 0x00b200, 0x00000001, 0x00000000)) {
- NV_ERROR(dev, "PMPEG init: 0x%08x\n", nv_rd32(dev, 0x00b200));
- return -EBUSY;
- }
-
- return 0;
-}
-
-static int
-nv40_mpeg_fini(struct drm_device *dev, int engine, bool suspend)
-{
- /*XXX: context save? */
- nv_mask(dev, 0x00b32c, 0x00000001, 0x00000000);
- nv_wr32(dev, 0x00b140, 0x00000000);
- return 0;
-}
-
-static int
-nv40_mpeg_mthd_dma(struct nouveau_channel *chan, u32 class, u32 mthd, u32 data)
-{
- struct drm_device *dev = chan->dev;
- u32 inst = data << 4;
- u32 dma0 = nv_ri32(dev, inst + 0);
- u32 dma1 = nv_ri32(dev, inst + 4);
- u32 dma2 = nv_ri32(dev, inst + 8);
- u32 base = (dma2 & 0xfffff000) | (dma0 >> 20);
- u32 size = dma1 + 1;
-
- /* only allow linear DMA objects */
- if (!(dma0 & 0x00002000))
- return -EINVAL;
-
- if (mthd == 0x0190) {
- /* DMA_CMD */
- nv_mask(dev, 0x00b300, 0x00030000, (dma0 & 0x00030000));
- nv_wr32(dev, 0x00b334, base);
- nv_wr32(dev, 0x00b324, size);
- } else
- if (mthd == 0x01a0) {
- /* DMA_DATA */
- nv_mask(dev, 0x00b300, 0x000c0000, (dma0 & 0x00030000) << 2);
- nv_wr32(dev, 0x00b360, base);
- nv_wr32(dev, 0x00b364, size);
- } else {
- /* DMA_IMAGE, VRAM only */
- if (dma0 & 0x000c0000)
- return -EINVAL;
-
- nv_wr32(dev, 0x00b370, base);
- nv_wr32(dev, 0x00b374, size);
- }
-
- return 0;
-}
-
-static int
-nv40_mpeg_isr_chid(struct drm_device *dev, u32 inst)
-{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_gpuobj *ctx;
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&dev_priv->channels.lock, flags);
- for (i = 0; i < dev_priv->engine.fifo.channels; i++) {
- if (!dev_priv->channels.ptr[i])
- continue;
-
- ctx = dev_priv->channels.ptr[i]->engctx[NVOBJ_ENGINE_MPEG];
- if (ctx && ctx->pinst == inst)
- break;
- }
- spin_unlock_irqrestore(&dev_priv->channels.lock, flags);
- return i;
-}
-
-static void
-nv40_vpe_set_tile_region(struct drm_device *dev, int i)
-{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_tile_reg *tile = &dev_priv->tile.reg[i];
-
- nv_wr32(dev, 0x00b008 + (i * 0x10), tile->pitch);
- nv_wr32(dev, 0x00b004 + (i * 0x10), tile->limit);
- nv_wr32(dev, 0x00b000 + (i * 0x10), tile->addr);
-}
-
-static void
-nv40_mpeg_isr(struct drm_device *dev)
-{
- u32 inst = (nv_rd32(dev, 0x00b318) & 0x000fffff) << 4;
- u32 chid = nv40_mpeg_isr_chid(dev, inst);
- u32 stat = nv_rd32(dev, 0x00b100);
- u32 type = nv_rd32(dev, 0x00b230);
- u32 mthd = nv_rd32(dev, 0x00b234);
- u32 data = nv_rd32(dev, 0x00b238);
- u32 show = stat;
-
- if (stat & 0x01000000) {
- /* happens on initial binding of the object */
- if (type == 0x00000020 && mthd == 0x0000) {
- nv_mask(dev, 0x00b308, 0x00000000, 0x00000000);
- show &= ~0x01000000;
- }
-
- if (type == 0x00000010) {
- if (!nouveau_gpuobj_mthd_call2(dev, chid, 0x3174, mthd, data))
- show &= ~0x01000000;
- }
- }
-
- nv_wr32(dev, 0x00b100, stat);
- nv_wr32(dev, 0x00b230, 0x00000001);
-
- if (show && nouveau_ratelimit()) {
- NV_INFO(dev, "PMPEG: Ch %d [0x%08x] 0x%08x 0x%08x 0x%08x 0x%08x\n",
- chid, inst, stat, type, mthd, data);
- }
-}
-
-static void
-nv40_vpe_isr(struct drm_device *dev)
-{
- if (nv_rd32(dev, 0x00b100))
- nv40_mpeg_isr(dev);
-
- if (nv_rd32(dev, 0x00b800)) {
- u32 stat = nv_rd32(dev, 0x00b800);
- NV_INFO(dev, "PMSRCH: 0x%08x\n", stat);
- nv_wr32(dev, 0xb800, stat);
- }
-}
-
-static void
-nv40_mpeg_destroy(struct drm_device *dev, int engine)
-{
- struct nv40_mpeg_engine *pmpeg = nv_engine(dev, engine);
-
- nouveau_irq_unregister(dev, 0);
-
- NVOBJ_ENGINE_DEL(dev, MPEG);
- kfree(pmpeg);
-}
-
-int
-nv40_mpeg_create(struct drm_device *dev)
-{
- struct nv40_mpeg_engine *pmpeg;
-
- pmpeg = kzalloc(sizeof(*pmpeg), GFP_KERNEL);
- if (!pmpeg)
- return -ENOMEM;
-
- pmpeg->base.destroy = nv40_mpeg_destroy;
- pmpeg->base.init = nv40_mpeg_init;
- pmpeg->base.fini = nv40_mpeg_fini;
- pmpeg->base.context_new = nv40_mpeg_context_new;
- pmpeg->base.context_del = nv40_mpeg_context_del;
- pmpeg->base.object_new = nv40_mpeg_object_new;
-
- /* ISR vector, PMC_ENABLE bit, and TILE regs are shared between
- * all VPE engines, for this driver's purposes the PMPEG engine
- * will be treated as the "master" and handle the global VPE
- * bits too
- */
- pmpeg->base.set_tile_region = nv40_vpe_set_tile_region;
- nouveau_irq_register(dev, 0, nv40_vpe_isr);
-
- NVOBJ_ENGINE_ADD(dev, MPEG, &pmpeg->base);
- NVOBJ_CLASS(dev, 0x3174, MPEG);
- NVOBJ_MTHD (dev, 0x3174, 0x0190, nv40_mpeg_mthd_dma);
- NVOBJ_MTHD (dev, 0x3174, 0x01a0, nv40_mpeg_mthd_dma);
- NVOBJ_MTHD (dev, 0x3174, 0x01b0, nv40_mpeg_mthd_dma);
-
-#if 0
- NVOBJ_ENGINE_ADD(dev, ME, &pme->base);
- NVOBJ_CLASS(dev, 0x4075, ME);
-#endif
- return 0;
-
-}
diff --git a/drivers/gpu/drm/nouveau/nv40_pm.c b/drivers/gpu/drm/nouveau/nv40_pm.c
new file mode 100644
index 0000000..bbc0b9c
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nv40_pm.c
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+#include "nouveau_drv.h"
+#include "nouveau_bios.h"
+#include "nouveau_pm.h"
+#include "nouveau_hw.h"
+
+#define min2(a,b) ((a) < (b) ? (a) : (b))
+
+static u32
+read_pll_1(struct drm_device *dev, u32 reg)
+{
+ u32 ctrl = nv_rd32(dev, reg + 0x00);
+ int P = (ctrl & 0x00070000) >> 16;
+ int N = (ctrl & 0x0000ff00) >> 8;
+ int M = (ctrl & 0x000000ff) >> 0;
+ u32 ref = 27000, clk = 0;
+
+ if (ctrl & 0x80000000)
+ clk = ref * N / M;
+
+ return clk >> P;
+}
+
+static u32
+read_pll_2(struct drm_device *dev, u32 reg)
+{
+ u32 ctrl = nv_rd32(dev, reg + 0x00);
+ u32 coef = nv_rd32(dev, reg + 0x04);
+ int N2 = (coef & 0xff000000) >> 24;
+ int M2 = (coef & 0x00ff0000) >> 16;
+ int N1 = (coef & 0x0000ff00) >> 8;
+ int M1 = (coef & 0x000000ff) >> 0;
+ int P = (ctrl & 0x00070000) >> 16;
+ u32 ref = 27000, clk = 0;
+
+ if (ctrl & 0x80000000)
+ clk = ref * N1 / M1;
+
+ if (!(ctrl & 0x00000100)) {
+ if (ctrl & 0x40000000)
+ clk = clk * N2 / M2;
+ }
+
+ return clk >> P;
+}
+
+static u32
+read_clk(struct drm_device *dev, u32 src)
+{
+ switch (src) {
+ case 3:
+ return read_pll_2(dev, 0x004000);
+ case 2:
+ return read_pll_1(dev, 0x004008);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+int
+nv40_pm_clocks_get(struct drm_device *dev, struct nouveau_pm_level *perflvl)
+{
+ u32 ctrl = nv_rd32(dev, 0x00c040);
+
+ perflvl->core = read_clk(dev, (ctrl & 0x00000003) >> 0);
+ perflvl->shader = read_clk(dev, (ctrl & 0x00000030) >> 4);
+ perflvl->memory = read_pll_2(dev, 0x4020);
+ return 0;
+}
+
+struct nv40_pm_state {
+ u32 ctrl;
+ u32 npll_ctrl;
+ u32 npll_coef;
+ u32 spll;
+ u32 mpll_ctrl;
+ u32 mpll_coef;
+};
+
+static int
+nv40_calc_pll(struct drm_device *dev, u32 reg, struct pll_lims *pll,
+ u32 clk, int *N1, int *M1, int *N2, int *M2, int *log2P)
+{
+ struct nouveau_pll_vals coef;
+ int ret;
+
+ ret = get_pll_limits(dev, reg, pll);
+ if (ret)
+ return ret;
+
+ if (clk < pll->vco1.maxfreq)
+ pll->vco2.maxfreq = 0;
+
+ ret = nouveau_calc_pll_mnp(dev, pll, clk, &coef);
+ if (ret == 0)
+ return -ERANGE;
+
+ *N1 = coef.N1;
+ *M1 = coef.M1;
+ if (N2 && M2) {
+ if (pll->vco2.maxfreq) {
+ *N2 = coef.N2;
+ *M2 = coef.M2;
+ } else {
+ *N2 = 1;
+ *M2 = 1;
+ }
+ }
+ *log2P = coef.log2P;
+ return 0;
+}
+
+void *
+nv40_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
+{
+ struct nv40_pm_state *info;
+ struct pll_lims pll;
+ int N1, N2, M1, M2, log2P;
+ int ret;
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return ERR_PTR(-ENOMEM);
+
+ /* core/geometric clock */
+ ret = nv40_calc_pll(dev, 0x004000, &pll, perflvl->core,
+ &N1, &M1, &N2, &M2, &log2P);
+ if (ret < 0)
+ goto out;
+
+ if (N2 == M2) {
+ info->npll_ctrl = 0x80000100 | (log2P << 16);
+ info->npll_coef = (N1 << 8) | M1;
+ } else {
+ info->npll_ctrl = 0xc0000000 | (log2P << 16);
+ info->npll_coef = (N2 << 24) | (M2 << 16) | (N1 << 8) | M1;
+ }
+
+ /* use the second PLL for shader/rop clock, if it differs from core */
+ if (perflvl->shader && perflvl->shader != perflvl->core) {
+ ret = nv40_calc_pll(dev, 0x004008, &pll, perflvl->shader,
+ &N1, &M1, NULL, NULL, &log2P);
+ if (ret < 0)
+ goto out;
+
+ info->spll = 0xc0000000 | (log2P << 16) | (N1 << 8) | M1;
+ info->ctrl = 0x00000223;
+ } else {
+ info->spll = 0x00000000;
+ info->ctrl = 0x00000333;
+ }
+
+ /* memory clock */
+ ret = nv40_calc_pll(dev, 0x004020, &pll, perflvl->memory,
+ &N1, &M1, &N2, &M2, &log2P);
+ if (ret < 0)
+ goto out;
+
+ info->mpll_ctrl = 0x80000000 | (log2P << 16);
+ info->mpll_ctrl |= min2(pll.log2p_bias + log2P, pll.max_log2p) << 20;
+ if (N2 == M2) {
+ info->mpll_ctrl |= 0x00000100;
+ info->mpll_coef = (N1 << 8) | M1;
+ } else {
+ info->mpll_ctrl |= 0x40000000;
+ info->mpll_coef = (N2 << 24) | (M2 << 16) | (N1 << 8) | M1;
+ }
+
+out:
+ if (ret < 0) {
+ kfree(info);
+ info = ERR_PTR(ret);
+ }
+ return info;
+}
+
+static bool
+nv40_pm_gr_idle(void *data)
+{
+ struct drm_device *dev = data;
+
+ if ((nv_rd32(dev, 0x400760) & 0x000000f0) >> 4 !=
+ (nv_rd32(dev, 0x400760) & 0x0000000f))
+ return false;
+
+ if (nv_rd32(dev, 0x400700))
+ return false;
+
+ return true;
+}
+
+void
+nv40_pm_clocks_set(struct drm_device *dev, void *pre_state)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nv40_pm_state *info = pre_state;
+ unsigned long flags;
+ struct bit_entry M;
+ u32 crtc_mask = 0;
+ u8 sr1[2];
+ int i;
+
+ /* determine which CRTCs are active, fetch VGA_SR1 for each */
+ for (i = 0; i < 2; i++) {
+ u32 vbl = nv_rd32(dev, 0x600808 + (i * 0x2000));
+ u32 cnt = 0;
+ do {
+ if (vbl != nv_rd32(dev, 0x600808 + (i * 0x2000))) {
+ nv_wr08(dev, 0x0c03c4 + (i * 0x2000), 0x01);
+ sr1[i] = nv_rd08(dev, 0x0c03c5 + (i * 0x2000));
+ if (!(sr1[i] & 0x20))
+ crtc_mask |= (1 << i);
+ break;
+ }
+ udelay(1);
+ } while (cnt++ < 32);
+ }
+
+ /* halt and idle engines */
+ spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
+ nv_mask(dev, 0x002500, 0x00000001, 0x00000000);
+ if (!nv_wait(dev, 0x002500, 0x00000010, 0x00000000))
+ goto resume;
+ nv_mask(dev, 0x003220, 0x00000001, 0x00000000);
+ if (!nv_wait(dev, 0x003220, 0x00000010, 0x00000000))
+ goto resume;
+ nv_mask(dev, 0x003200, 0x00000001, 0x00000000);
+ nv04_fifo_cache_pull(dev, false);
+
+ if (!nv_wait_cb(dev, nv40_pm_gr_idle, dev))
+ goto resume;
+
+ /* set engine clocks */
+ nv_mask(dev, 0x00c040, 0x00000333, 0x00000000);
+ nv_wr32(dev, 0x004004, info->npll_coef);
+ nv_mask(dev, 0x004000, 0xc0070100, info->npll_ctrl);
+ nv_mask(dev, 0x004008, 0xc007ffff, info->spll);
+ mdelay(5);
+ nv_mask(dev, 0x00c040, 0x00000333, info->ctrl);
+
+ /* wait for vblank start on active crtcs, disable memory access */
+ for (i = 0; i < 2; i++) {
+ if (!(crtc_mask & (1 << i)))
+ continue;
+ nv_wait(dev, 0x600808 + (i * 0x2000), 0x00010000, 0x00000000);
+ nv_wait(dev, 0x600808 + (i * 0x2000), 0x00010000, 0x00010000);
+ nv_wr08(dev, 0x0c03c4 + (i * 0x2000), 0x01);
+ nv_wr08(dev, 0x0c03c5 + (i * 0x2000), sr1[i] | 0x20);
+ }
+
+ /* prepare ram for reclocking */
+ nv_wr32(dev, 0x1002d4, 0x00000001); /* precharge */
+ nv_wr32(dev, 0x1002d0, 0x00000001); /* refresh */
+ nv_wr32(dev, 0x1002d0, 0x00000001); /* refresh */
+ nv_mask(dev, 0x100210, 0x80000000, 0x00000000); /* no auto refresh */
+ nv_wr32(dev, 0x1002dc, 0x00000001); /* enable self-refresh */
+
+ /* change the PLL of each memory partition */
+ nv_mask(dev, 0x00c040, 0x0000c000, 0x00000000);
+ switch (dev_priv->chipset) {
+ case 0x40:
+ case 0x45:
+ case 0x41:
+ case 0x42:
+ case 0x47:
+ nv_mask(dev, 0x004044, 0xc0771100, info->mpll_ctrl);
+ nv_mask(dev, 0x00402c, 0xc0771100, info->mpll_ctrl);
+ nv_wr32(dev, 0x004048, info->mpll_coef);
+ nv_wr32(dev, 0x004030, info->mpll_coef);
+ case 0x43:
+ case 0x49:
+ case 0x4b:
+ nv_mask(dev, 0x004038, 0xc0771100, info->mpll_ctrl);
+ nv_wr32(dev, 0x00403c, info->mpll_coef);
+ default:
+ nv_mask(dev, 0x004020, 0xc0771100, info->mpll_ctrl);
+ nv_wr32(dev, 0x004024, info->mpll_coef);
+ break;
+ }
+ udelay(100);
+ nv_mask(dev, 0x00c040, 0x0000c000, 0x0000c000);
+
+ /* re-enable normal operation of memory controller */
+ nv_wr32(dev, 0x1002dc, 0x00000000);
+ nv_mask(dev, 0x100210, 0x80000000, 0x80000000);
+ udelay(100);
+
+ /* execute memory reset script from vbios */
+ if (!bit_table(dev, 'M', &M))
+ nouveau_bios_init_exec(dev, ROM16(M.data[0]));
+
+ /* make sure we're in vblank (hopefully the same one as before), and
+ * then re-enable crtc memory access
+ */
+ for (i = 0; i < 2; i++) {
+ if (!(crtc_mask & (1 << i)))
+ continue;
+ nv_wait(dev, 0x600808 + (i * 0x2000), 0x00010000, 0x00010000);
+ nv_wr08(dev, 0x0c03c4 + (i * 0x2000), 0x01);
+ nv_wr08(dev, 0x0c03c5 + (i * 0x2000), sr1[i]);
+ }
+
+ /* resume engines */
+resume:
+ nv_wr32(dev, 0x003250, 0x00000001);
+ nv_mask(dev, 0x003220, 0x00000001, 0x00000001);
+ nv_wr32(dev, 0x003200, 0x00000001);
+ nv_wr32(dev, 0x002500, 0x00000001);
+ spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
+
+ kfree(info);
+}
diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c
index 5d989073..882080e 100644
--- a/drivers/gpu/drm/nouveau/nv50_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv50_crtc.c
@@ -329,8 +329,6 @@
drm_crtc_cleanup(&nv_crtc->base);
- nv50_cursor_fini(nv_crtc);
-
nouveau_bo_unmap(nv_crtc->lut.nvbo);
nouveau_bo_ref(NULL, &nv_crtc->lut.nvbo);
nouveau_bo_unmap(nv_crtc->cursor.nvbo);
diff --git a/drivers/gpu/drm/nouveau/nv50_cursor.c b/drivers/gpu/drm/nouveau/nv50_cursor.c
index 9752c35..adfc9b6 100644
--- a/drivers/gpu/drm/nouveau/nv50_cursor.c
+++ b/drivers/gpu/drm/nouveau/nv50_cursor.c
@@ -137,21 +137,3 @@
nv_crtc->cursor.show = nv50_cursor_show;
return 0;
}
-
-void
-nv50_cursor_fini(struct nouveau_crtc *nv_crtc)
-{
- struct drm_device *dev = nv_crtc->base.dev;
- int idx = nv_crtc->index;
-
- NV_DEBUG_KMS(dev, "\n");
-
- nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx), 0);
- if (!nv_wait(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx),
- NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS, 0)) {
- NV_ERROR(dev, "timeout: CURSOR_CTRL2_STATUS == 0\n");
- NV_ERROR(dev, "CURSOR_CTRL2 = 0x%08x\n",
- nv_rd32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx)));
- }
-}
-
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index db1a5f4..d23ca00 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -247,6 +247,16 @@
}
}
+ for (i = 0; i < 2; i++) {
+ nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i), 0);
+ if (!nv_wait(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i),
+ NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS, 0)) {
+ NV_ERROR(dev, "timeout: CURSOR_CTRL2_STATUS == 0\n");
+ NV_ERROR(dev, "CURSOR_CTRL2 = 0x%08x\n",
+ nv_rd32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i)));
+ }
+ }
+
nv50_evo_fini(dev);
for (i = 0; i < 3; i++) {
@@ -286,23 +296,6 @@
return -ENOMEM;
dev_priv->engine.display.priv = priv;
- /* init basic kernel modesetting */
- drm_mode_config_init(dev);
-
- /* Initialise some optional connector properties. */
- drm_mode_create_scaling_mode_property(dev);
- drm_mode_create_dithering_property(dev);
-
- dev->mode_config.min_width = 0;
- dev->mode_config.min_height = 0;
-
- dev->mode_config.funcs = (void *)&nouveau_mode_config_funcs;
-
- dev->mode_config.max_width = 8192;
- dev->mode_config.max_height = 8192;
-
- dev->mode_config.fb_base = dev_priv->fb_phys;
-
/* Create CRTC objects */
for (i = 0; i < 2; i++)
nv50_crtc_create(dev, i);
@@ -364,8 +357,6 @@
NV_DEBUG_KMS(dev, "\n");
- drm_mode_config_cleanup(dev);
-
nv50_display_disable(dev);
nouveau_irq_unregister(dev, 26);
kfree(disp);
@@ -698,7 +689,7 @@
struct dcb_entry *dcb = &dev_priv->vbios.dcb.entry[i];
if (dcb->type == type && (dcb->or & (1 << or))) {
- nouveau_bios_run_display_table(dev, dcb, 0, -1);
+ nouveau_bios_run_display_table(dev, 0, -1, dcb, -1);
disp->irq.dcb = dcb;
goto ack;
}
@@ -711,37 +702,6 @@
}
static void
-nv50_display_unk20_dp_hack(struct drm_device *dev, struct dcb_entry *dcb)
-{
- int or = ffs(dcb->or) - 1, link = !(dcb->dpconf.sor.link & 1);
- struct drm_encoder *encoder;
- uint32_t tmp, unk0 = 0, unk1 = 0;
-
- if (dcb->type != OUTPUT_DP)
- return;
-
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
-
- if (nv_encoder->dcb == dcb) {
- unk0 = nv_encoder->dp.unk0;
- unk1 = nv_encoder->dp.unk1;
- break;
- }
- }
-
- if (unk0 || unk1) {
- tmp = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link));
- tmp &= 0xfffffe03;
- nv_wr32(dev, NV50_SOR_DP_CTRL(or, link), tmp | unk0);
-
- tmp = nv_rd32(dev, NV50_SOR_DP_UNK128(or, link));
- tmp &= 0xfef080c0;
- nv_wr32(dev, NV50_SOR_DP_UNK128(or, link), tmp | unk1);
- }
-}
-
-static void
nv50_display_unk20_handler(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -753,7 +713,7 @@
NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30);
dcb = disp->irq.dcb;
if (dcb) {
- nouveau_bios_run_display_table(dev, dcb, 0, -2);
+ nouveau_bios_run_display_table(dev, 0, -2, dcb, -1);
disp->irq.dcb = NULL;
}
@@ -837,9 +797,15 @@
}
script = nv50_display_script_select(dev, dcb, mc, pclk);
- nouveau_bios_run_display_table(dev, dcb, script, pclk);
+ nouveau_bios_run_display_table(dev, script, pclk, dcb, -1);
- nv50_display_unk20_dp_hack(dev, dcb);
+ if (type == OUTPUT_DP) {
+ int link = !(dcb->dpconf.sor.link & 1);
+ if ((mc & 0x000f0000) == 0x00020000)
+ nouveau_dp_tu_update(dev, or, link, pclk, 18);
+ else
+ nouveau_dp_tu_update(dev, or, link, pclk, 24);
+ }
if (dcb->type != OUTPUT_ANALOG) {
tmp = nv_rd32(dev, NV50_PDISPLAY_SOR_CLK_CTRL2(or));
@@ -904,7 +870,7 @@
if (!dcb)
goto ack;
- nouveau_bios_run_display_table(dev, dcb, script, -pclk);
+ nouveau_bios_run_display_table(dev, script, -pclk, dcb, -1);
nv50_display_unk40_dp_set_tmds(dev, dcb);
ack:
diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c
index d4f4206..793a5cc 100644
--- a/drivers/gpu/drm/nouveau/nv50_gpio.c
+++ b/drivers/gpu/drm/nouveau/nv50_gpio.c
@@ -98,6 +98,37 @@
}
int
+nvd0_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag)
+{
+ struct dcb_gpio_entry *gpio;
+ u32 v;
+
+ gpio = nouveau_bios_gpio_entry(dev, tag);
+ if (!gpio)
+ return -ENOENT;
+
+ v = nv_rd32(dev, 0x00d610 + (gpio->line * 4));
+ v &= 0x00004000;
+ return (!!v == (gpio->state[1] & 1));
+}
+
+int
+nvd0_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state)
+{
+ struct dcb_gpio_entry *gpio;
+ u32 v;
+
+ gpio = nouveau_bios_gpio_entry(dev, tag);
+ if (!gpio)
+ return -ENOENT;
+
+ v = gpio->state[state] ^ 2;
+
+ nv_mask(dev, 0x00d610 + (gpio->line * 4), 0x00003000, v << 12);
+ return 0;
+}
+
+int
nv50_gpio_irq_register(struct drm_device *dev, enum dcb_gpio_tag tag,
void (*handler)(void *, int), void *data)
{
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index d43c46c..8c979b3 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -120,70 +120,62 @@
return 0;
}
-static void
-nv50_graph_init_reset(struct drm_device *dev)
-{
- uint32_t pmc_e = NV_PMC_ENABLE_PGRAPH | (1 << 21);
- NV_DEBUG(dev, "\n");
-
- nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) & ~pmc_e);
- nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) | pmc_e);
-}
-
-static void
-nv50_graph_init_intr(struct drm_device *dev)
-{
- NV_DEBUG(dev, "\n");
-
- nv_wr32(dev, NV03_PGRAPH_INTR, 0xffffffff);
- nv_wr32(dev, 0x400138, 0xffffffff);
- nv_wr32(dev, NV40_PGRAPH_INTR_EN, 0xffffffff);
-}
-
-static void
-nv50_graph_init_regs__nv(struct drm_device *dev)
+static int
+nv50_graph_init(struct drm_device *dev, int engine)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- uint32_t units = nv_rd32(dev, 0x1540);
+ struct nv50_graph_engine *pgraph = nv_engine(dev, engine);
+ u32 units = nv_rd32(dev, 0x001540);
int i;
NV_DEBUG(dev, "\n");
+ /* master reset */
+ nv_mask(dev, 0x000200, 0x00200100, 0x00000000);
+ nv_mask(dev, 0x000200, 0x00200100, 0x00200100);
+ nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */
+
+ /* reset/enable traps and interrupts */
nv_wr32(dev, 0x400804, 0xc0000000);
nv_wr32(dev, 0x406800, 0xc0000000);
nv_wr32(dev, 0x400c04, 0xc0000000);
nv_wr32(dev, 0x401800, 0xc0000000);
nv_wr32(dev, 0x405018, 0xc0000000);
nv_wr32(dev, 0x402000, 0xc0000000);
-
for (i = 0; i < 16; i++) {
- if (units & 1 << i) {
- if (dev_priv->chipset < 0xa0) {
- nv_wr32(dev, 0x408900 + (i << 12), 0xc0000000);
- nv_wr32(dev, 0x408e08 + (i << 12), 0xc0000000);
- nv_wr32(dev, 0x408314 + (i << 12), 0xc0000000);
- } else {
- nv_wr32(dev, 0x408600 + (i << 11), 0xc0000000);
- nv_wr32(dev, 0x408708 + (i << 11), 0xc0000000);
- nv_wr32(dev, 0x40831c + (i << 11), 0xc0000000);
- }
+ if (!(units & (1 << i)))
+ continue;
+
+ if (dev_priv->chipset < 0xa0) {
+ nv_wr32(dev, 0x408900 + (i << 12), 0xc0000000);
+ nv_wr32(dev, 0x408e08 + (i << 12), 0xc0000000);
+ nv_wr32(dev, 0x408314 + (i << 12), 0xc0000000);
+ } else {
+ nv_wr32(dev, 0x408600 + (i << 11), 0xc0000000);
+ nv_wr32(dev, 0x408708 + (i << 11), 0xc0000000);
+ nv_wr32(dev, 0x40831c + (i << 11), 0xc0000000);
}
}
nv_wr32(dev, 0x400108, 0xffffffff);
-
- nv_wr32(dev, 0x400824, 0x00004000);
+ nv_wr32(dev, 0x400138, 0xffffffff);
+ nv_wr32(dev, 0x400100, 0xffffffff);
+ nv_wr32(dev, 0x40013c, 0xffffffff);
nv_wr32(dev, 0x400500, 0x00010001);
-}
-static void
-nv50_graph_init_zcull(struct drm_device *dev)
-{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- int i;
+ /* upload context program, initialise ctxctl defaults */
+ nv_wr32(dev, 0x400324, 0x00000000);
+ for (i = 0; i < pgraph->ctxprog_size; i++)
+ nv_wr32(dev, 0x400328, pgraph->ctxprog[i]);
+ nv_wr32(dev, 0x400824, 0x00000000);
+ nv_wr32(dev, 0x400828, 0x00000000);
+ nv_wr32(dev, 0x40082c, 0x00000000);
+ nv_wr32(dev, 0x400830, 0x00000000);
+ nv_wr32(dev, 0x400724, 0x00000000);
+ nv_wr32(dev, 0x40032c, 0x00000000);
+ nv_wr32(dev, 0x400320, 4); /* CTXCTL_CMD = NEWCTXDMA */
- NV_DEBUG(dev, "\n");
-
+ /* some unknown zcull magic */
switch (dev_priv->chipset & 0xf0) {
case 0x50:
case 0x80:
@@ -212,43 +204,7 @@
nv_wr32(dev, 0x402c28 + (i * 8), 0x00000000);
nv_wr32(dev, 0x402c2c + (i * 8), 0x00000000);
}
-}
-static int
-nv50_graph_init_ctxctl(struct drm_device *dev)
-{
- struct nv50_graph_engine *pgraph = nv_engine(dev, NVOBJ_ENGINE_GR);
- int i;
-
- NV_DEBUG(dev, "\n");
-
- nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0);
- for (i = 0; i < pgraph->ctxprog_size; i++)
- nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, pgraph->ctxprog[i]);
-
- nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */
- nv_wr32(dev, 0x400320, 4);
- nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0);
- nv_wr32(dev, NV20_PGRAPH_CHANNEL_CTX_POINTER, 0);
- return 0;
-}
-
-static int
-nv50_graph_init(struct drm_device *dev, int engine)
-{
- int ret;
-
- NV_DEBUG(dev, "\n");
-
- nv50_graph_init_reset(dev);
- nv50_graph_init_regs__nv(dev);
- nv50_graph_init_zcull(dev);
-
- ret = nv50_graph_init_ctxctl(dev);
- if (ret)
- return ret;
-
- nv50_graph_init_intr(dev);
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nv50_grctx.c b/drivers/gpu/drm/nouveau/nv50_grctx.c
index de9abff..d05c2c3 100644
--- a/drivers/gpu/drm/nouveau/nv50_grctx.c
+++ b/drivers/gpu/drm/nouveau/nv50_grctx.c
@@ -40,6 +40,12 @@
#define CP_FLAG_UNK0B ((0 * 32) + 0xb)
#define CP_FLAG_UNK0B_CLEAR 0
#define CP_FLAG_UNK0B_SET 1
+#define CP_FLAG_XFER_SWITCH ((0 * 32) + 0xe)
+#define CP_FLAG_XFER_SWITCH_DISABLE 0
+#define CP_FLAG_XFER_SWITCH_ENABLE 1
+#define CP_FLAG_STATE ((0 * 32) + 0x1c)
+#define CP_FLAG_STATE_STOPPED 0
+#define CP_FLAG_STATE_RUNNING 1
#define CP_FLAG_UNK1D ((0 * 32) + 0x1d)
#define CP_FLAG_UNK1D_CLEAR 0
#define CP_FLAG_UNK1D_SET 1
@@ -194,6 +200,9 @@
"the devs.\n");
return -ENOSYS;
}
+
+ cp_set (ctx, STATE, RUNNING);
+ cp_set (ctx, XFER_SWITCH, ENABLE);
/* decide whether we're loading/unloading the context */
cp_bra (ctx, AUTO_SAVE, PENDING, cp_setup_save);
cp_bra (ctx, USER_SAVE, PENDING, cp_setup_save);
@@ -260,6 +269,8 @@
cp_name(ctx, cp_exit);
cp_set (ctx, USER_SAVE, NOT_PENDING);
cp_set (ctx, USER_LOAD, NOT_PENDING);
+ cp_set (ctx, XFER_SWITCH, DISABLE);
+ cp_set (ctx, STATE, STOPPED);
cp_out (ctx, CP_END);
ctx->ctxvals_pos += 0x400; /* padding... no idea why you need it */
diff --git a/drivers/gpu/drm/nouveau/nv50_pm.c b/drivers/gpu/drm/nouveau/nv50_pm.c
index 8a28100..3d5a86b 100644
--- a/drivers/gpu/drm/nouveau/nv50_pm.c
+++ b/drivers/gpu/drm/nouveau/nv50_pm.c
@@ -115,15 +115,15 @@
BIT_M.version == 1 && BIT_M.length >= 0x0b) {
script = ROM16(BIT_M.data[0x05]);
if (script)
- nouveau_bios_run_init_table(dev, script, NULL);
+ nouveau_bios_run_init_table(dev, script, NULL, -1);
script = ROM16(BIT_M.data[0x07]);
if (script)
- nouveau_bios_run_init_table(dev, script, NULL);
+ nouveau_bios_run_init_table(dev, script, NULL, -1);
script = ROM16(BIT_M.data[0x09]);
if (script)
- nouveau_bios_run_init_table(dev, script, NULL);
+ nouveau_bios_run_init_table(dev, script, NULL, -1);
- nouveau_bios_run_init_table(dev, perflvl->memscript, NULL);
+ nouveau_bios_run_init_table(dev, perflvl->memscript, NULL, -1);
}
if (state->type == PLL_MEMORY) {
diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c
index ffe8b48..2633aa8 100644
--- a/drivers/gpu/drm/nouveau/nv50_sor.c
+++ b/drivers/gpu/drm/nouveau/nv50_sor.c
@@ -124,7 +124,7 @@
if (mode == DRM_MODE_DPMS_ON) {
u8 status = DP_SET_POWER_D0;
nouveau_dp_auxch(auxch, 8, DP_SET_POWER, &status, 1);
- nouveau_dp_link_train(encoder);
+ nouveau_dp_link_train(encoder, nv_encoder->dp.datarate);
} else {
u8 status = DP_SET_POWER_D3;
nouveau_dp_auxch(auxch, 8, DP_SET_POWER, &status, 1);
@@ -187,14 +187,13 @@
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct drm_device *dev = encoder->dev;
struct nouveau_crtc *crtc = nouveau_crtc(encoder->crtc);
+ struct nouveau_connector *nv_connector;
uint32_t mode_ctl = 0;
int ret;
NV_DEBUG_KMS(dev, "or %d type %d -> crtc %d\n",
nv_encoder->or, nv_encoder->dcb->type, crtc->index);
- nv50_sor_dpms(encoder, DRM_MODE_DPMS_ON);
-
switch (nv_encoder->dcb->type) {
case OUTPUT_TMDS:
if (nv_encoder->dcb->sorconf.link & 1) {
@@ -206,7 +205,15 @@
mode_ctl = 0x0200;
break;
case OUTPUT_DP:
- mode_ctl |= (nv_encoder->dp.mc_unknown << 16);
+ nv_connector = nouveau_encoder_connector_get(nv_encoder);
+ if (nv_connector && nv_connector->base.display_info.bpc == 6) {
+ nv_encoder->dp.datarate = crtc->mode->clock * 18 / 8;
+ mode_ctl |= 0x00020000;
+ } else {
+ nv_encoder->dp.datarate = crtc->mode->clock * 24 / 8;
+ mode_ctl |= 0x00050000;
+ }
+
if (nv_encoder->dcb->sorconf.link & 1)
mode_ctl |= 0x00000800;
else
@@ -227,6 +234,8 @@
if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
mode_ctl |= NV50_EVO_SOR_MODE_CTRL_NVSYNC;
+ nv50_sor_dpms(encoder, DRM_MODE_DPMS_ON);
+
ret = RING_SPACE(evo, 2);
if (ret) {
NV_ERROR(dev, "no space while connecting SOR\n");
@@ -313,31 +322,6 @@
encoder->possible_crtcs = entry->heads;
encoder->possible_clones = 0;
- if (nv_encoder->dcb->type == OUTPUT_DP) {
- int or = nv_encoder->or, link = !(entry->dpconf.sor.link & 1);
- uint32_t tmp;
-
- tmp = nv_rd32(dev, 0x61c700 + (or * 0x800));
- if (!tmp)
- tmp = nv_rd32(dev, 0x610798 + (or * 8));
-
- switch ((tmp & 0x00000f00) >> 8) {
- case 8:
- case 9:
- nv_encoder->dp.mc_unknown = (tmp & 0x000f0000) >> 16;
- tmp = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link));
- nv_encoder->dp.unk0 = tmp & 0x000001fc;
- tmp = nv_rd32(dev, NV50_SOR_DP_UNK128(or, link));
- nv_encoder->dp.unk1 = tmp & 0x010f7f3f;
- break;
- default:
- break;
- }
-
- if (!nv_encoder->dp.mc_unknown)
- nv_encoder->dp.mc_unknown = 5;
- }
-
drm_mode_connector_attach_encoder(connector, encoder);
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nv50_vram.c b/drivers/gpu/drm/nouveau/nv50_vram.c
index af32dae..9da2383 100644
--- a/drivers/gpu/drm/nouveau/nv50_vram.c
+++ b/drivers/gpu/drm/nouveau/nv50_vram.c
@@ -51,7 +51,7 @@
nv50_vram_del(struct drm_device *dev, struct nouveau_mem **pmem)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_mm *mm = dev_priv->engine.vram.mm;
+ struct nouveau_mm *mm = &dev_priv->engine.vram.mm;
struct nouveau_mm_node *this;
struct nouveau_mem *mem;
@@ -82,7 +82,7 @@
u32 memtype, struct nouveau_mem **pmem)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_mm *mm = dev_priv->engine.vram.mm;
+ struct nouveau_mm *mm = &dev_priv->engine.vram.mm;
struct nouveau_mm_node *r;
struct nouveau_mem *mem;
int comp = (memtype & 0x300) >> 8;
diff --git a/drivers/gpu/drm/nouveau/nva3_pm.c b/drivers/gpu/drm/nouveau/nva3_pm.c
index e4b2b9e..618c144 100644
--- a/drivers/gpu/drm/nouveau/nva3_pm.c
+++ b/drivers/gpu/drm/nouveau/nva3_pm.c
@@ -27,178 +27,316 @@
#include "nouveau_bios.h"
#include "nouveau_pm.h"
-/* This is actually a lot more complex than it appears here, but hopefully
- * this should be able to deal with what the VBIOS leaves for us..
- *
- * If not, well, I'll jump off that bridge when I come to it.
- */
+static u32 read_clk(struct drm_device *, int, bool);
+static u32 read_pll(struct drm_device *, int, u32);
-struct nva3_pm_state {
- enum pll_types type;
- u32 src0;
- u32 src1;
- u32 ctrl;
- u32 coef;
- u32 old_pnm;
- u32 new_pnm;
- u32 new_div;
+static u32
+read_vco(struct drm_device *dev, int clk)
+{
+ u32 sctl = nv_rd32(dev, 0x4120 + (clk * 4));
+ if ((sctl & 0x00000030) != 0x00000030)
+ return read_pll(dev, 0x41, 0x00e820);
+ return read_pll(dev, 0x42, 0x00e8a0);
+}
+
+static u32
+read_clk(struct drm_device *dev, int clk, bool ignore_en)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ u32 sctl, sdiv, sclk;
+
+ /* refclk for the 0xe8xx plls is a fixed frequency */
+ if (clk >= 0x40) {
+ if (dev_priv->chipset == 0xaf) {
+ /* no joke.. seriously.. sigh.. */
+ return nv_rd32(dev, 0x00471c) * 1000;
+ }
+
+ return dev_priv->crystal;
+ }
+
+ sctl = nv_rd32(dev, 0x4120 + (clk * 4));
+ if (!ignore_en && !(sctl & 0x00000100))
+ return 0;
+
+ switch (sctl & 0x00003000) {
+ case 0x00000000:
+ return dev_priv->crystal;
+ case 0x00002000:
+ if (sctl & 0x00000040)
+ return 108000;
+ return 100000;
+ case 0x00003000:
+ sclk = read_vco(dev, clk);
+ sdiv = ((sctl & 0x003f0000) >> 16) + 2;
+ return (sclk * 2) / sdiv;
+ default:
+ return 0;
+ }
+}
+
+static u32
+read_pll(struct drm_device *dev, int clk, u32 pll)
+{
+ u32 ctrl = nv_rd32(dev, pll + 0);
+ u32 sclk = 0, P = 1, N = 1, M = 1;
+
+ if (!(ctrl & 0x00000008)) {
+ if (ctrl & 0x00000001) {
+ u32 coef = nv_rd32(dev, pll + 4);
+ M = (coef & 0x000000ff) >> 0;
+ N = (coef & 0x0000ff00) >> 8;
+ P = (coef & 0x003f0000) >> 16;
+
+ /* no post-divider on these.. */
+ if ((pll & 0x00ff00) == 0x00e800)
+ P = 1;
+
+ sclk = read_clk(dev, 0x00 + clk, false);
+ }
+ } else {
+ sclk = read_clk(dev, 0x10 + clk, false);
+ }
+
+ return sclk * N / (M * P);
+}
+
+struct creg {
+ u32 clk;
+ u32 pll;
};
static int
-nva3_pm_pll_offset(u32 id)
+calc_clk(struct drm_device *dev, int clk, u32 pll, u32 khz, struct creg *reg)
{
- static const u32 pll_map[] = {
- 0x00, PLL_CORE,
- 0x01, PLL_SHADER,
- 0x02, PLL_MEMORY,
- 0x00, 0x00
- };
- const u32 *map = pll_map;
+ struct pll_lims limits;
+ u32 oclk, sclk, sdiv;
+ int P, N, M, diff;
+ int ret;
- while (map[1]) {
- if (id == map[1])
- return map[0];
- map += 2;
+ reg->pll = 0;
+ reg->clk = 0;
+ if (!khz) {
+ NV_DEBUG(dev, "no clock for 0x%04x/0x%02x\n", pll, clk);
+ return 0;
}
- return -ENOENT;
-}
+ switch (khz) {
+ case 27000:
+ reg->clk = 0x00000100;
+ return khz;
+ case 100000:
+ reg->clk = 0x00002100;
+ return khz;
+ case 108000:
+ reg->clk = 0x00002140;
+ return khz;
+ default:
+ sclk = read_vco(dev, clk);
+ sdiv = min((sclk * 2) / (khz - 2999), (u32)65);
+ /* if the clock has a PLL attached, and we can get a within
+ * [-2, 3) MHz of a divider, we'll disable the PLL and use
+ * the divider instead.
+ *
+ * divider can go as low as 2, limited here because NVIDIA
+ * and the VBIOS on my NVA8 seem to prefer using the PLL
+ * for 810MHz - is there a good reason?
+ */
+ if (sdiv > 4) {
+ oclk = (sclk * 2) / sdiv;
+ diff = khz - oclk;
+ if (!pll || (diff >= -2000 && diff < 3000)) {
+ reg->clk = (((sdiv - 2) << 16) | 0x00003100);
+ return oclk;
+ }
+ }
-int
-nva3_pm_clock_get(struct drm_device *dev, u32 id)
-{
- u32 src0, src1, ctrl, coef;
- struct pll_lims pll;
- int ret, off;
- int P, N, M;
+ if (!pll) {
+ NV_ERROR(dev, "bad freq %02x: %d %d\n", clk, khz, sclk);
+ return -ERANGE;
+ }
- ret = get_pll_limits(dev, id, &pll);
+ break;
+ }
+
+ ret = get_pll_limits(dev, pll, &limits);
if (ret)
return ret;
- off = nva3_pm_pll_offset(id);
- if (off < 0)
- return off;
+ limits.refclk = read_clk(dev, clk - 0x10, true);
+ if (!limits.refclk)
+ return -EINVAL;
- src0 = nv_rd32(dev, 0x4120 + (off * 4));
- src1 = nv_rd32(dev, 0x4160 + (off * 4));
- ctrl = nv_rd32(dev, pll.reg + 0);
- coef = nv_rd32(dev, pll.reg + 4);
- NV_DEBUG(dev, "PLL %02x: 0x%08x 0x%08x 0x%08x 0x%08x\n",
- id, src0, src1, ctrl, coef);
-
- if (ctrl & 0x00000008) {
- u32 div = ((src1 & 0x003c0000) >> 18) + 1;
- return (pll.refclk * 2) / div;
+ ret = nva3_calc_pll(dev, &limits, khz, &N, NULL, &M, &P);
+ if (ret >= 0) {
+ reg->clk = nv_rd32(dev, 0x4120 + (clk * 4));
+ reg->pll = (P << 16) | (N << 8) | M;
}
-
- P = (coef & 0x003f0000) >> 16;
- N = (coef & 0x0000ff00) >> 8;
- M = (coef & 0x000000ff);
- return pll.refclk * N / M / P;
+ return ret;
}
-void *
-nva3_pm_clock_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl,
- u32 id, int khz)
+static void
+prog_pll(struct drm_device *dev, int clk, u32 pll, struct creg *reg)
{
- struct nva3_pm_state *pll;
- struct pll_lims limits;
- int N, M, P, diff;
- int ret, off;
+ const u32 src0 = 0x004120 + (clk * 4);
+ const u32 src1 = 0x004160 + (clk * 4);
+ const u32 ctrl = pll + 0;
+ const u32 coef = pll + 4;
+ u32 cntl;
- ret = get_pll_limits(dev, id, &limits);
- if (ret < 0)
- return (ret == -ENOENT) ? NULL : ERR_PTR(ret);
-
- off = nva3_pm_pll_offset(id);
- if (id < 0)
- return ERR_PTR(-EINVAL);
-
-
- pll = kzalloc(sizeof(*pll), GFP_KERNEL);
- if (!pll)
- return ERR_PTR(-ENOMEM);
- pll->type = id;
- pll->src0 = 0x004120 + (off * 4);
- pll->src1 = 0x004160 + (off * 4);
- pll->ctrl = limits.reg + 0;
- pll->coef = limits.reg + 4;
-
- /* If target clock is within [-2, 3) MHz of a divisor, we'll
- * use that instead of calculating MNP values
- */
- pll->new_div = min((limits.refclk * 2) / (khz - 2999), 16);
- if (pll->new_div) {
- diff = khz - ((limits.refclk * 2) / pll->new_div);
- if (diff < -2000 || diff >= 3000)
- pll->new_div = 0;
+ if (!reg->clk && !reg->pll) {
+ NV_DEBUG(dev, "no clock for %02x\n", clk);
+ return;
}
- if (!pll->new_div) {
- ret = nva3_calc_pll(dev, &limits, khz, &N, NULL, &M, &P);
- if (ret < 0)
- return ERR_PTR(ret);
-
- pll->new_pnm = (P << 16) | (N << 8) | M;
- pll->new_div = 2 - 1;
+ cntl = nv_rd32(dev, ctrl) & 0xfffffff2;
+ if (reg->pll) {
+ nv_mask(dev, src0, 0x00000101, 0x00000101);
+ nv_wr32(dev, coef, reg->pll);
+ nv_wr32(dev, ctrl, cntl | 0x00000015);
+ nv_mask(dev, src1, 0x00000100, 0x00000000);
+ nv_mask(dev, src1, 0x00000001, 0x00000000);
} else {
- pll->new_pnm = 0;
- pll->new_div--;
+ nv_mask(dev, src1, 0x003f3141, 0x00000101 | reg->clk);
+ nv_wr32(dev, ctrl, cntl | 0x0000001d);
+ nv_mask(dev, ctrl, 0x00000001, 0x00000000);
+ nv_mask(dev, src0, 0x00000100, 0x00000000);
+ nv_mask(dev, src0, 0x00000001, 0x00000000);
+ }
+}
+
+static void
+prog_clk(struct drm_device *dev, int clk, struct creg *reg)
+{
+ if (!reg->clk) {
+ NV_DEBUG(dev, "no clock for %02x\n", clk);
+ return;
}
- if ((nv_rd32(dev, pll->src1) & 0x00000101) != 0x00000101)
- pll->old_pnm = nv_rd32(dev, pll->coef);
- return pll;
+ nv_mask(dev, 0x004120 + (clk * 4), 0x003f3141, 0x00000101 | reg->clk);
+}
+
+int
+nva3_pm_clocks_get(struct drm_device *dev, struct nouveau_pm_level *perflvl)
+{
+ perflvl->core = read_pll(dev, 0x00, 0x4200);
+ perflvl->shader = read_pll(dev, 0x01, 0x4220);
+ perflvl->memory = read_pll(dev, 0x02, 0x4000);
+ perflvl->unka0 = read_clk(dev, 0x20, false);
+ perflvl->vdec = read_clk(dev, 0x21, false);
+ perflvl->daemon = read_clk(dev, 0x25, false);
+ perflvl->copy = perflvl->core;
+ return 0;
+}
+
+struct nva3_pm_state {
+ struct creg nclk;
+ struct creg sclk;
+ struct creg mclk;
+ struct creg vdec;
+ struct creg unka0;
+};
+
+void *
+nva3_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
+{
+ struct nva3_pm_state *info;
+ int ret;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return ERR_PTR(-ENOMEM);
+
+ ret = calc_clk(dev, 0x10, 0x4200, perflvl->core, &info->nclk);
+ if (ret < 0)
+ goto out;
+
+ ret = calc_clk(dev, 0x11, 0x4220, perflvl->shader, &info->sclk);
+ if (ret < 0)
+ goto out;
+
+ ret = calc_clk(dev, 0x12, 0x4000, perflvl->memory, &info->mclk);
+ if (ret < 0)
+ goto out;
+
+ ret = calc_clk(dev, 0x20, 0x0000, perflvl->unka0, &info->unka0);
+ if (ret < 0)
+ goto out;
+
+ ret = calc_clk(dev, 0x21, 0x0000, perflvl->vdec, &info->vdec);
+ if (ret < 0)
+ goto out;
+
+out:
+ if (ret < 0) {
+ kfree(info);
+ info = ERR_PTR(ret);
+ }
+ return info;
+}
+
+static bool
+nva3_pm_grcp_idle(void *data)
+{
+ struct drm_device *dev = data;
+
+ if (!(nv_rd32(dev, 0x400304) & 0x00000001))
+ return true;
+ if (nv_rd32(dev, 0x400308) == 0x0050001c)
+ return true;
+ return false;
}
void
-nva3_pm_clock_set(struct drm_device *dev, void *pre_state)
+nva3_pm_clocks_set(struct drm_device *dev, void *pre_state)
{
- struct nva3_pm_state *pll = pre_state;
- u32 ctrl = 0;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nva3_pm_state *info = pre_state;
+ unsigned long flags;
- /* For the memory clock, NVIDIA will build a "script" describing
- * the reclocking process and ask PDAEMON to execute it.
- */
- if (pll->type == PLL_MEMORY) {
+ /* prevent any new grctx switches from starting */
+ spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
+ nv_wr32(dev, 0x400324, 0x00000000);
+ nv_wr32(dev, 0x400328, 0x0050001c); /* wait flag 0x1c */
+ /* wait for any pending grctx switches to complete */
+ if (!nv_wait_cb(dev, nva3_pm_grcp_idle, dev)) {
+ NV_ERROR(dev, "pm: ctxprog didn't go idle\n");
+ goto cleanup;
+ }
+ /* freeze PFIFO */
+ nv_mask(dev, 0x002504, 0x00000001, 0x00000001);
+ if (!nv_wait(dev, 0x002504, 0x00000010, 0x00000010)) {
+ NV_ERROR(dev, "pm: fifo didn't go idle\n");
+ goto cleanup;
+ }
+
+ prog_pll(dev, 0x00, 0x004200, &info->nclk);
+ prog_pll(dev, 0x01, 0x004220, &info->sclk);
+ prog_clk(dev, 0x20, &info->unka0);
+ prog_clk(dev, 0x21, &info->vdec);
+
+ if (info->mclk.clk || info->mclk.pll) {
nv_wr32(dev, 0x100210, 0);
nv_wr32(dev, 0x1002dc, 1);
nv_wr32(dev, 0x004018, 0x00001000);
- ctrl = 0x18000100;
- }
-
- if (pll->old_pnm || !pll->new_pnm) {
- nv_mask(dev, pll->src1, 0x003c0101, 0x00000101 |
- (pll->new_div << 18));
- nv_wr32(dev, pll->ctrl, 0x0001001d | ctrl);
- nv_mask(dev, pll->ctrl, 0x00000001, 0x00000000);
- }
-
- if (pll->new_pnm) {
- nv_mask(dev, pll->src0, 0x00000101, 0x00000101);
- nv_wr32(dev, pll->coef, pll->new_pnm);
- nv_wr32(dev, pll->ctrl, 0x0001001d | ctrl);
- nv_mask(dev, pll->ctrl, 0x00000010, 0x00000000);
- nv_mask(dev, pll->ctrl, 0x00020010, 0x00020010);
- nv_wr32(dev, pll->ctrl, 0x00010015 | ctrl);
- nv_mask(dev, pll->src1, 0x00000100, 0x00000000);
- nv_mask(dev, pll->src1, 0x00000001, 0x00000000);
- if (pll->type == PLL_MEMORY)
- nv_wr32(dev, 0x4018, 0x10005000);
- } else {
- nv_mask(dev, pll->ctrl, 0x00000001, 0x00000000);
- nv_mask(dev, pll->src0, 0x00000100, 0x00000000);
- nv_mask(dev, pll->src0, 0x00000001, 0x00000000);
- if (pll->type == PLL_MEMORY)
- nv_wr32(dev, 0x4018, 0x1000d000);
- }
-
- if (pll->type == PLL_MEMORY) {
+ prog_pll(dev, 0x02, 0x004000, &info->mclk);
+ if (nv_rd32(dev, 0x4000) & 0x00000008)
+ nv_wr32(dev, 0x004018, 0x1000d000);
+ else
+ nv_wr32(dev, 0x004018, 0x10005000);
nv_wr32(dev, 0x1002dc, 0);
nv_wr32(dev, 0x100210, 0x80000000);
}
- kfree(pll);
+cleanup:
+ /* unfreeze PFIFO */
+ nv_mask(dev, 0x002504, 0x00000001, 0x00000000);
+ /* restore ctxprog to normal */
+ nv_wr32(dev, 0x400324, 0x00000000);
+ nv_wr32(dev, 0x400328, 0x0070009c); /* set flag 0x1c */
+ /* unblock it if necessary */
+ if (nv_rd32(dev, 0x400308) == 0x0050001c)
+ nv_mask(dev, 0x400824, 0x10000000, 0x10000000);
+ spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
+ kfree(info);
}
-
diff --git a/drivers/gpu/drm/nouveau/nvc0_fb.c b/drivers/gpu/drm/nouveau/nvc0_fb.c
index 08e6b11..5bf5503 100644
--- a/drivers/gpu/drm/nouveau/nvc0_fb.c
+++ b/drivers/gpu/drm/nouveau/nvc0_fb.c
@@ -32,6 +32,30 @@
dma_addr_t r100c10;
};
+static inline void
+nvc0_mfb_subp_isr(struct drm_device *dev, int unit, int subp)
+{
+ u32 subp_base = 0x141000 + (unit * 0x2000) + (subp * 0x400);
+ u32 stat = nv_rd32(dev, subp_base + 0x020);
+
+ if (stat) {
+ NV_INFO(dev, "PMFB%d_SUBP%d: 0x%08x\n", unit, subp, stat);
+ nv_wr32(dev, subp_base + 0x020, stat);
+ }
+}
+
+static void
+nvc0_mfb_isr(struct drm_device *dev)
+{
+ u32 units = nv_rd32(dev, 0x00017c);
+ while (units) {
+ u32 subp, unit = ffs(units) - 1;
+ for (subp = 0; subp < 2; subp++)
+ nvc0_mfb_subp_isr(dev, unit, subp);
+ units &= ~(1 << unit);
+ }
+}
+
static void
nvc0_fb_destroy(struct drm_device *dev)
{
@@ -39,6 +63,8 @@
struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
struct nvc0_fb_priv *priv = pfb->priv;
+ nouveau_irq_unregister(dev, 25);
+
if (priv->r100c10_page) {
pci_unmap_page(dev->pdev, priv->r100c10, PAGE_SIZE,
PCI_DMA_BIDIRECTIONAL);
@@ -74,6 +100,7 @@
return -EFAULT;
}
+ nouveau_irq_register(dev, 25, nvc0_mfb_isr);
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nvc0_fifo.c b/drivers/gpu/drm/nouveau/nvc0_fifo.c
index 6f9f341..dcbe0d5 100644
--- a/drivers/gpu/drm/nouveau/nvc0_fifo.c
+++ b/drivers/gpu/drm/nouveau/nvc0_fifo.c
@@ -322,7 +322,7 @@
}
/* PSUBFIFO[n] */
- for (i = 0; i < 3; i++) {
+ for (i = 0; i < priv->spoon_nr; i++) {
nv_mask(dev, 0x04013c + (i * 0x2000), 0x10000100, 0x00000000);
nv_wr32(dev, 0x040108 + (i * 0x2000), 0xffffffff); /* INTR */
nv_wr32(dev, 0x04010c + (i * 0x2000), 0xfffffeff); /* INTR_EN */
diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c
index 5b2f6f4..4b8d0b3 100644
--- a/drivers/gpu/drm/nouveau/nvc0_graph.c
+++ b/drivers/gpu/drm/nouveau/nvc0_graph.c
@@ -390,7 +390,7 @@
}
nv_wr32(dev, GPC_BCAST(0x1bd4), magicgpc918);
- nv_wr32(dev, GPC_BCAST(0x08ac), priv->rop_nr);
+ nv_wr32(dev, GPC_BCAST(0x08ac), nv_rd32(dev, 0x100800));
}
static void
@@ -700,22 +700,6 @@
nv_wr32(dev, 0x400500, 0x00010001);
}
-static void
-nvc0_runk140_isr(struct drm_device *dev)
-{
- u32 units = nv_rd32(dev, 0x00017c) & 0x1f;
-
- while (units) {
- u32 unit = ffs(units) - 1;
- u32 reg = 0x140000 + unit * 0x2000;
- u32 st0 = nv_mask(dev, reg + 0x1020, 0, 0);
- u32 st1 = nv_mask(dev, reg + 0x1420, 0, 0);
-
- NV_DEBUG(dev, "PRUNK140: %d 0x%08x 0x%08x\n", unit, st0, st1);
- units &= ~(1 << unit);
- }
-}
-
static int
nvc0_graph_create_fw(struct drm_device *dev, const char *fwname,
struct nvc0_graph_fuc *fuc)
@@ -764,7 +748,6 @@
}
nouveau_irq_unregister(dev, 12);
- nouveau_irq_unregister(dev, 25);
nouveau_gpuobj_ref(NULL, &priv->unk4188b8);
nouveau_gpuobj_ref(NULL, &priv->unk4188b4);
@@ -803,7 +786,6 @@
NVOBJ_ENGINE_ADD(dev, GR, &priv->base);
nouveau_irq_register(dev, 12, nvc0_graph_isr);
- nouveau_irq_register(dev, 25, nvc0_runk140_isr);
if (nouveau_ctxfw) {
NV_INFO(dev, "PGRAPH: using external firmware\n");
@@ -864,6 +846,9 @@
case 0xce: /* 4/4/0/0, 4 */
priv->magic_not_rop_nr = 0x03;
break;
+ case 0xcf: /* 4/0/0/0, 3 */
+ priv->magic_not_rop_nr = 0x03;
+ break;
}
if (!priv->magic_not_rop_nr) {
@@ -889,20 +874,3 @@
nvc0_graph_destroy(dev, NVOBJ_ENGINE_GR);
return ret;
}
-
-MODULE_FIRMWARE("nouveau/nvc0_fuc409c");
-MODULE_FIRMWARE("nouveau/nvc0_fuc409d");
-MODULE_FIRMWARE("nouveau/nvc0_fuc41ac");
-MODULE_FIRMWARE("nouveau/nvc0_fuc41ad");
-MODULE_FIRMWARE("nouveau/nvc3_fuc409c");
-MODULE_FIRMWARE("nouveau/nvc3_fuc409d");
-MODULE_FIRMWARE("nouveau/nvc3_fuc41ac");
-MODULE_FIRMWARE("nouveau/nvc3_fuc41ad");
-MODULE_FIRMWARE("nouveau/nvc4_fuc409c");
-MODULE_FIRMWARE("nouveau/nvc4_fuc409d");
-MODULE_FIRMWARE("nouveau/nvc4_fuc41ac");
-MODULE_FIRMWARE("nouveau/nvc4_fuc41ad");
-MODULE_FIRMWARE("nouveau/fuc409c");
-MODULE_FIRMWARE("nouveau/fuc409d");
-MODULE_FIRMWARE("nouveau/fuc41ac");
-MODULE_FIRMWARE("nouveau/fuc41ad");
diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.h b/drivers/gpu/drm/nouveau/nvc0_graph.h
index 55689e9..636fe98 100644
--- a/drivers/gpu/drm/nouveau/nvc0_graph.h
+++ b/drivers/gpu/drm/nouveau/nvc0_graph.h
@@ -82,6 +82,7 @@
case 0xc3:
case 0xc4:
case 0xce: /* guess, mmio trace shows only 0x9097 state */
+ case 0xcf: /* guess, mmio trace shows only 0x9097 state */
return 0x9097;
case 0xc1:
return 0x9197;
diff --git a/drivers/gpu/drm/nouveau/nvc0_grctx.c b/drivers/gpu/drm/nouveau/nvc0_grctx.c
index 31018ea..dd0e6a7 100644
--- a/drivers/gpu/drm/nouveau/nvc0_grctx.c
+++ b/drivers/gpu/drm/nouveau/nvc0_grctx.c
@@ -1678,7 +1678,10 @@
nv_wr32(dev, 0x419c04, 0x00000006);
nv_wr32(dev, 0x419c08, 0x00000002);
nv_wr32(dev, 0x419c20, 0x00000000);
- nv_wr32(dev, 0x419cb0, 0x00060048); //XXX: 0xce 0x00020048
+ if (chipset == 0xce || chipset == 0xcf)
+ nv_wr32(dev, 0x419cb0, 0x00020048);
+ else
+ nv_wr32(dev, 0x419cb0, 0x00060048);
nv_wr32(dev, 0x419ce8, 0x00000000);
nv_wr32(dev, 0x419cf4, 0x00000183);
nv_wr32(dev, 0x419d20, chipset != 0xc1 ? 0x02180000 : 0x12180000);
@@ -1783,11 +1786,7 @@
nv_wr32(dev, 0x40587c, 0x00000000);
if (1) {
- const u8 chipset_tp_max[] = { 16, 4, 0, 4, 8, 0, 0, 0,
- 16, 0, 0, 0, 0, 0, 8, 0 };
- u8 max = chipset_tp_max[dev_priv->chipset & 0x0f];
- u8 tpnr[GPC_MAX];
- u8 data[TP_MAX];
+ u8 tpnr[GPC_MAX], data[TP_MAX];
memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
memset(data, 0x1f, sizeof(data));
@@ -1801,7 +1800,7 @@
data[tp] = gpc;
}
- for (i = 0; i < max / 4; i++)
+ for (i = 0; i < 4; i++)
nv_wr32(dev, 0x4060a8 + (i * 4), ((u32 *)data)[i]);
}
diff --git a/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc b/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc
index 0ec2add..06f5e26 100644
--- a/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc
+++ b/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc
@@ -77,6 +77,11 @@
.b16 nvc0_gpc_mmio_tail
.b16 nvc0_tpc_mmio_head
.b16 nvc3_tpc_mmio_tail
+.b8 0xcf 0 0 0
+.b16 nvc0_gpc_mmio_head
+.b16 nvc0_gpc_mmio_tail
+.b16 nvc0_tpc_mmio_head
+.b16 nvcf_tpc_mmio_tail
.b8 0 0 0 0
// GPC mmio lists
@@ -134,8 +139,9 @@
nvc0_tpc_mmio_tail:
mmctx_data(0x000758, 1)
mmctx_data(0x0002c4, 1)
-mmctx_data(0x0004bc, 1)
mmctx_data(0x0006e0, 1)
+nvcf_tpc_mmio_tail:
+mmctx_data(0x0004bc, 1)
nvc3_tpc_mmio_tail:
mmctx_data(0x000544, 1)
nvc1_tpc_mmio_tail:
diff --git a/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc.h b/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc.h
index 1896c89..6f82032 100644
--- a/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc.h
+++ b/drivers/gpu/drm/nouveau/nvc0_grgpc.fuc.h
@@ -25,23 +25,26 @@
0x00000000,
0x00000000,
0x000000c0,
- 0x011000b0,
- 0x01640114,
+ 0x011c00bc,
+ 0x01700120,
0x000000c1,
- 0x011400b0,
- 0x01780114,
+ 0x012000bc,
+ 0x01840120,
0x000000c3,
- 0x011000b0,
- 0x01740114,
+ 0x011c00bc,
+ 0x01800120,
0x000000c4,
- 0x011000b0,
- 0x01740114,
+ 0x011c00bc,
+ 0x01800120,
0x000000c8,
- 0x011000b0,
- 0x01640114,
+ 0x011c00bc,
+ 0x01700120,
0x000000ce,
- 0x011000b0,
- 0x01740114,
+ 0x011c00bc,
+ 0x01800120,
+ 0x000000cf,
+ 0x011c00bc,
+ 0x017c0120,
0x00000000,
0x00000380,
0x14000400,
@@ -90,8 +93,8 @@
0x04000750,
0x00000758,
0x000002c4,
- 0x000004bc,
0x000006e0,
+ 0x000004bc,
0x00000544,
};
diff --git a/drivers/gpu/drm/nouveau/nvc0_grhub.fuc b/drivers/gpu/drm/nouveau/nvc0_grhub.fuc
index a1a5991..e4f8c7e 100644
--- a/drivers/gpu/drm/nouveau/nvc0_grhub.fuc
+++ b/drivers/gpu/drm/nouveau/nvc0_grhub.fuc
@@ -56,6 +56,9 @@
.b8 0xce 0 0 0
.b16 nvc0_hub_mmio_head
.b16 nvc0_hub_mmio_tail
+.b8 0xcf 0 0 0
+.b16 nvc0_hub_mmio_head
+.b16 nvc0_hub_mmio_tail
.b8 0 0 0 0
nvc0_hub_mmio_head:
diff --git a/drivers/gpu/drm/nouveau/nvc0_grhub.fuc.h b/drivers/gpu/drm/nouveau/nvc0_grhub.fuc.h
index b3b541b..241d326 100644
--- a/drivers/gpu/drm/nouveau/nvc0_grhub.fuc.h
+++ b/drivers/gpu/drm/nouveau/nvc0_grhub.fuc.h
@@ -23,17 +23,19 @@
0x00000000,
0x00000000,
0x000000c0,
- 0x012c0090,
+ 0x01340098,
0x000000c1,
- 0x01300090,
+ 0x01380098,
0x000000c3,
- 0x012c0090,
+ 0x01340098,
0x000000c4,
- 0x012c0090,
+ 0x01340098,
0x000000c8,
- 0x012c0090,
+ 0x01340098,
0x000000ce,
- 0x012c0090,
+ 0x01340098,
+ 0x000000cf,
+ 0x01340098,
0x00000000,
0x0417e91c,
0x04400204,
@@ -190,8 +192,6 @@
0x00000000,
0x00000000,
0x00000000,
- 0x00000000,
- 0x00000000,
};
uint32_t nvc0_grhub_code[] = {
diff --git a/drivers/gpu/drm/nouveau/nvc0_pm.c b/drivers/gpu/drm/nouveau/nvc0_pm.c
new file mode 100644
index 0000000..929aded
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nvc0_pm.c
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+#include "nouveau_drv.h"
+#include "nouveau_bios.h"
+#include "nouveau_pm.h"
+
+static u32 read_div(struct drm_device *, int, u32, u32);
+static u32 read_pll(struct drm_device *, u32);
+
+static u32
+read_vco(struct drm_device *dev, u32 dsrc)
+{
+ u32 ssrc = nv_rd32(dev, dsrc);
+ if (!(ssrc & 0x00000100))
+ return read_pll(dev, 0x00e800);
+ return read_pll(dev, 0x00e820);
+}
+
+static u32
+read_pll(struct drm_device *dev, u32 pll)
+{
+ u32 ctrl = nv_rd32(dev, pll + 0);
+ u32 coef = nv_rd32(dev, pll + 4);
+ u32 P = (coef & 0x003f0000) >> 16;
+ u32 N = (coef & 0x0000ff00) >> 8;
+ u32 M = (coef & 0x000000ff) >> 0;
+ u32 sclk, doff;
+
+ if (!(ctrl & 0x00000001))
+ return 0;
+
+ switch (pll & 0xfff000) {
+ case 0x00e000:
+ sclk = 27000;
+ P = 1;
+ break;
+ case 0x137000:
+ doff = (pll - 0x137000) / 0x20;
+ sclk = read_div(dev, doff, 0x137120, 0x137140);
+ break;
+ case 0x132000:
+ switch (pll) {
+ case 0x132000:
+ sclk = read_pll(dev, 0x132020);
+ break;
+ case 0x132020:
+ sclk = read_div(dev, 0, 0x137320, 0x137330);
+ break;
+ default:
+ return 0;
+ }
+ break;
+ default:
+ return 0;
+ }
+
+ return sclk * N / M / P;
+}
+
+static u32
+read_div(struct drm_device *dev, int doff, u32 dsrc, u32 dctl)
+{
+ u32 ssrc = nv_rd32(dev, dsrc + (doff * 4));
+ u32 sctl = nv_rd32(dev, dctl + (doff * 4));
+
+ switch (ssrc & 0x00000003) {
+ case 0:
+ if ((ssrc & 0x00030000) != 0x00030000)
+ return 27000;
+ return 108000;
+ case 2:
+ return 100000;
+ case 3:
+ if (sctl & 0x80000000) {
+ u32 sclk = read_vco(dev, dsrc + (doff * 4));
+ u32 sdiv = (sctl & 0x0000003f) + 2;
+ return (sclk * 2) / sdiv;
+ }
+
+ return read_vco(dev, dsrc + (doff * 4));
+ default:
+ return 0;
+ }
+}
+
+static u32
+read_mem(struct drm_device *dev)
+{
+ u32 ssel = nv_rd32(dev, 0x1373f0);
+ if (ssel & 0x00000001)
+ return read_div(dev, 0, 0x137300, 0x137310);
+ return read_pll(dev, 0x132000);
+}
+
+static u32
+read_clk(struct drm_device *dev, int clk)
+{
+ u32 sctl = nv_rd32(dev, 0x137250 + (clk * 4));
+ u32 ssel = nv_rd32(dev, 0x137100);
+ u32 sclk, sdiv;
+
+ if (ssel & (1 << clk)) {
+ if (clk < 7)
+ sclk = read_pll(dev, 0x137000 + (clk * 0x20));
+ else
+ sclk = read_pll(dev, 0x1370e0);
+ sdiv = ((sctl & 0x00003f00) >> 8) + 2;
+ } else {
+ sclk = read_div(dev, clk, 0x137160, 0x1371d0);
+ sdiv = ((sctl & 0x0000003f) >> 0) + 2;
+ }
+
+ if (sctl & 0x80000000)
+ return (sclk * 2) / sdiv;
+ return sclk;
+}
+
+int
+nvc0_pm_clocks_get(struct drm_device *dev, struct nouveau_pm_level *perflvl)
+{
+ perflvl->shader = read_clk(dev, 0x00);
+ perflvl->core = perflvl->shader / 2;
+ perflvl->memory = read_mem(dev);
+ perflvl->rop = read_clk(dev, 0x01);
+ perflvl->hub07 = read_clk(dev, 0x02);
+ perflvl->hub06 = read_clk(dev, 0x07);
+ perflvl->hub01 = read_clk(dev, 0x08);
+ perflvl->copy = read_clk(dev, 0x09);
+ perflvl->daemon = read_clk(dev, 0x0c);
+ perflvl->vdec = read_clk(dev, 0x0e);
+ return 0;
+}
diff --git a/drivers/gpu/drm/nouveau/nvc0_vram.c b/drivers/gpu/drm/nouveau/nvc0_vram.c
index e45a24d..edbfe93 100644
--- a/drivers/gpu/drm/nouveau/nvc0_vram.c
+++ b/drivers/gpu/drm/nouveau/nvc0_vram.c
@@ -61,7 +61,7 @@
u32 type, struct nouveau_mem **pmem)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_mm *mm = dev_priv->engine.vram.mm;
+ struct nouveau_mm *mm = &dev_priv->engine.vram.mm;
struct nouveau_mm_node *r;
struct nouveau_mem *mem;
int ret;
@@ -106,12 +106,50 @@
struct nouveau_vram_engine *vram = &dev_priv->engine.vram;
const u32 rsvd_head = ( 256 * 1024) >> 12; /* vga memory */
const u32 rsvd_tail = (1024 * 1024) >> 12; /* vbios etc */
- u32 length;
+ u32 parts = nv_rd32(dev, 0x121c74);
+ u32 bsize = nv_rd32(dev, 0x10f20c);
+ u32 offset, length;
+ bool uniform = true;
+ int ret, i;
- dev_priv->vram_size = nv_rd32(dev, 0x10f20c) << 20;
- dev_priv->vram_size *= nv_rd32(dev, 0x121c74);
+ NV_DEBUG(dev, "0x100800: 0x%08x\n", nv_rd32(dev, 0x100800));
+ NV_DEBUG(dev, "parts 0x%08x bcast_mem_amount 0x%08x\n", parts, bsize);
- length = (dev_priv->vram_size >> 12) - rsvd_head - rsvd_tail;
+ /* read amount of vram attached to each memory controller */
+ for (i = 0; i < parts; i++) {
+ u32 psize = nv_rd32(dev, 0x11020c + (i * 0x1000));
+ if (psize != bsize) {
+ if (psize < bsize)
+ bsize = psize;
+ uniform = false;
+ }
- return nouveau_mm_init(&vram->mm, rsvd_head, length, 1);
+ NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", i, psize);
+
+ dev_priv->vram_size += (u64)psize << 20;
+ }
+
+ /* if all controllers have the same amount attached, there's no holes */
+ if (uniform) {
+ offset = rsvd_head;
+ length = (dev_priv->vram_size >> 12) - rsvd_head - rsvd_tail;
+ return nouveau_mm_init(&vram->mm, offset, length, 1);
+ }
+
+ /* otherwise, address lowest common amount from 0GiB */
+ ret = nouveau_mm_init(&vram->mm, rsvd_head, (bsize << 8) * parts, 1);
+ if (ret)
+ return ret;
+
+ /* and the rest starting from (8GiB + common_size) */
+ offset = (0x0200000000ULL >> 12) + (bsize << 8);
+ length = (dev_priv->vram_size >> 12) - (bsize << 8) - rsvd_tail;
+
+ ret = nouveau_mm_init(&vram->mm, offset, length, 0);
+ if (ret) {
+ nouveau_mm_fini(&vram->mm);
+ return ret;
+ }
+
+ return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c
new file mode 100644
index 0000000..23d63b4
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nvd0_display.c
@@ -0,0 +1,1473 @@
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include <linux/dma-mapping.h>
+
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+
+#include "nouveau_drv.h"
+#include "nouveau_connector.h"
+#include "nouveau_encoder.h"
+#include "nouveau_crtc.h"
+#include "nouveau_dma.h"
+#include "nouveau_fb.h"
+#include "nv50_display.h"
+
+struct nvd0_display {
+ struct nouveau_gpuobj *mem;
+ struct {
+ dma_addr_t handle;
+ u32 *ptr;
+ } evo[1];
+
+ struct tasklet_struct tasklet;
+ u32 modeset;
+};
+
+static struct nvd0_display *
+nvd0_display(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ return dev_priv->engine.display.priv;
+}
+
+static inline int
+evo_icmd(struct drm_device *dev, int id, u32 mthd, u32 data)
+{
+ int ret = 0;
+ nv_mask(dev, 0x610700 + (id * 0x10), 0x00000001, 0x00000001);
+ nv_wr32(dev, 0x610704 + (id * 0x10), data);
+ nv_mask(dev, 0x610704 + (id * 0x10), 0x80000ffc, 0x80000000 | mthd);
+ if (!nv_wait(dev, 0x610704 + (id * 0x10), 0x80000000, 0x00000000))
+ ret = -EBUSY;
+ nv_mask(dev, 0x610700 + (id * 0x10), 0x00000001, 0x00000000);
+ return ret;
+}
+
+static u32 *
+evo_wait(struct drm_device *dev, int id, int nr)
+{
+ struct nvd0_display *disp = nvd0_display(dev);
+ u32 put = nv_rd32(dev, 0x640000 + (id * 0x1000)) / 4;
+
+ if (put + nr >= (PAGE_SIZE / 4)) {
+ disp->evo[id].ptr[put] = 0x20000000;
+
+ nv_wr32(dev, 0x640000 + (id * 0x1000), 0x00000000);
+ if (!nv_wait(dev, 0x640004 + (id * 0x1000), ~0, 0x00000000)) {
+ NV_ERROR(dev, "evo %d dma stalled\n", id);
+ return NULL;
+ }
+
+ put = 0;
+ }
+
+ return disp->evo[id].ptr + put;
+}
+
+static void
+evo_kick(u32 *push, struct drm_device *dev, int id)
+{
+ struct nvd0_display *disp = nvd0_display(dev);
+ nv_wr32(dev, 0x640000 + (id * 0x1000), (push - disp->evo[id].ptr) << 2);
+}
+
+#define evo_mthd(p,m,s) *((p)++) = (((s) << 18) | (m))
+#define evo_data(p,d) *((p)++) = (d)
+
+static struct drm_crtc *
+nvd0_display_crtc_get(struct drm_encoder *encoder)
+{
+ return nouveau_encoder(encoder)->crtc;
+}
+
+/******************************************************************************
+ * CRTC
+ *****************************************************************************/
+static int
+nvd0_crtc_set_dither(struct nouveau_crtc *nv_crtc, bool on, bool update)
+{
+ struct drm_device *dev = nv_crtc->base.dev;
+ u32 *push, mode;
+
+ mode = 0x00000000;
+ if (on) {
+ /* 0x11: 6bpc dynamic 2x2
+ * 0x13: 8bpc dynamic 2x2
+ * 0x19: 6bpc static 2x2
+ * 0x1b: 8bpc static 2x2
+ * 0x21: 6bpc temporal
+ * 0x23: 8bpc temporal
+ */
+ mode = 0x00000011;
+ }
+
+ push = evo_wait(dev, 0, 4);
+ if (push) {
+ evo_mthd(push, 0x0490 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, mode);
+ if (update) {
+ evo_mthd(push, 0x0080, 1);
+ evo_data(push, 0x00000000);
+ }
+ evo_kick(push, dev, 0);
+ }
+
+ return 0;
+}
+
+static int
+nvd0_crtc_set_scale(struct nouveau_crtc *nv_crtc, int type, bool update)
+{
+ struct drm_display_mode *mode = &nv_crtc->base.mode;
+ struct drm_device *dev = nv_crtc->base.dev;
+ struct nouveau_connector *nv_connector;
+ u32 *push, outX, outY;
+
+ outX = mode->hdisplay;
+ outY = mode->vdisplay;
+
+ nv_connector = nouveau_crtc_connector_get(nv_crtc);
+ if (nv_connector && nv_connector->native_mode) {
+ struct drm_display_mode *native = nv_connector->native_mode;
+ u32 xratio = (native->hdisplay << 19) / mode->hdisplay;
+ u32 yratio = (native->vdisplay << 19) / mode->vdisplay;
+
+ switch (type) {
+ case DRM_MODE_SCALE_ASPECT:
+ if (xratio > yratio) {
+ outX = (mode->hdisplay * yratio) >> 19;
+ outY = (mode->vdisplay * yratio) >> 19;
+ } else {
+ outX = (mode->hdisplay * xratio) >> 19;
+ outY = (mode->vdisplay * xratio) >> 19;
+ }
+ break;
+ case DRM_MODE_SCALE_FULLSCREEN:
+ outX = native->hdisplay;
+ outY = native->vdisplay;
+ break;
+ default:
+ break;
+ }
+ }
+
+ push = evo_wait(dev, 0, 16);
+ if (push) {
+ evo_mthd(push, 0x04c0 + (nv_crtc->index * 0x300), 3);
+ evo_data(push, (outY << 16) | outX);
+ evo_data(push, (outY << 16) | outX);
+ evo_data(push, (outY << 16) | outX);
+ evo_mthd(push, 0x0494 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0x00000000);
+ evo_mthd(push, 0x04b8 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, (mode->vdisplay << 16) | mode->hdisplay);
+ if (update) {
+ evo_mthd(push, 0x0080, 1);
+ evo_data(push, 0x00000000);
+ }
+ evo_kick(push, dev, 0);
+ }
+
+ return 0;
+}
+
+static int
+nvd0_crtc_set_image(struct nouveau_crtc *nv_crtc, struct drm_framebuffer *fb,
+ int x, int y, bool update)
+{
+ struct nouveau_framebuffer *nvfb = nouveau_framebuffer(fb);
+ u32 *push;
+
+ push = evo_wait(fb->dev, 0, 16);
+ if (push) {
+ evo_mthd(push, 0x0460 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, nvfb->nvbo->bo.offset >> 8);
+ evo_mthd(push, 0x0468 + (nv_crtc->index * 0x300), 4);
+ evo_data(push, (fb->height << 16) | fb->width);
+ evo_data(push, nvfb->r_pitch);
+ evo_data(push, nvfb->r_format);
+ evo_data(push, nvfb->r_dma);
+ evo_mthd(push, 0x04b0 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, (y << 16) | x);
+ if (update) {
+ evo_mthd(push, 0x0080, 1);
+ evo_data(push, 0x00000000);
+ }
+ evo_kick(push, fb->dev, 0);
+ }
+
+ nv_crtc->fb.tile_flags = nvfb->r_dma;
+ return 0;
+}
+
+static void
+nvd0_crtc_cursor_show(struct nouveau_crtc *nv_crtc, bool show, bool update)
+{
+ struct drm_device *dev = nv_crtc->base.dev;
+ u32 *push = evo_wait(dev, 0, 16);
+ if (push) {
+ if (show) {
+ evo_mthd(push, 0x0480 + (nv_crtc->index * 0x300), 2);
+ evo_data(push, 0x85000000);
+ evo_data(push, nv_crtc->cursor.nvbo->bo.offset >> 8);
+ evo_mthd(push, 0x048c + (nv_crtc->index * 0x300), 1);
+ evo_data(push, NvEvoVRAM);
+ } else {
+ evo_mthd(push, 0x0480 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0x05000000);
+ evo_mthd(push, 0x048c + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0x00000000);
+ }
+
+ if (update) {
+ evo_mthd(push, 0x0080, 1);
+ evo_data(push, 0x00000000);
+ }
+
+ evo_kick(push, dev, 0);
+ }
+}
+
+static void
+nvd0_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+}
+
+static void
+nvd0_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ u32 *push;
+
+ push = evo_wait(crtc->dev, 0, 2);
+ if (push) {
+ evo_mthd(push, 0x0474 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0x00000000);
+ evo_mthd(push, 0x0440 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0x03000000);
+ evo_mthd(push, 0x045c + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0x00000000);
+ evo_kick(push, crtc->dev, 0);
+ }
+
+ nvd0_crtc_cursor_show(nv_crtc, false, false);
+}
+
+static void
+nvd0_crtc_commit(struct drm_crtc *crtc)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ u32 *push;
+
+ push = evo_wait(crtc->dev, 0, 32);
+ if (push) {
+ evo_mthd(push, 0x0474 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, nv_crtc->fb.tile_flags);
+ evo_mthd(push, 0x0440 + (nv_crtc->index * 0x300), 4);
+ evo_data(push, 0x83000000);
+ evo_data(push, nv_crtc->lut.nvbo->bo.offset >> 8);
+ evo_data(push, 0x00000000);
+ evo_data(push, 0x00000000);
+ evo_mthd(push, 0x045c + (nv_crtc->index * 0x300), 1);
+ evo_data(push, NvEvoVRAM);
+ evo_mthd(push, 0x0430 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0xffffff00);
+ evo_kick(push, crtc->dev, 0);
+ }
+
+ nvd0_crtc_cursor_show(nv_crtc, nv_crtc->cursor.visible, true);
+}
+
+static bool
+nvd0_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static int
+nvd0_crtc_swap_fbs(struct drm_crtc *crtc, struct drm_framebuffer *old_fb)
+{
+ struct nouveau_framebuffer *nvfb = nouveau_framebuffer(crtc->fb);
+ int ret;
+
+ ret = nouveau_bo_pin(nvfb->nvbo, TTM_PL_FLAG_VRAM);
+ if (ret)
+ return ret;
+
+ if (old_fb) {
+ nvfb = nouveau_framebuffer(old_fb);
+ nouveau_bo_unpin(nvfb->nvbo);
+ }
+
+ return 0;
+}
+
+static int
+nvd0_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *umode,
+ struct drm_display_mode *mode, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ struct nouveau_connector *nv_connector;
+ u32 htotal = mode->htotal;
+ u32 vtotal = mode->vtotal;
+ u32 hsyncw = mode->hsync_end - mode->hsync_start - 1;
+ u32 vsyncw = mode->vsync_end - mode->vsync_start - 1;
+ u32 hfrntp = mode->hsync_start - mode->hdisplay;
+ u32 vfrntp = mode->vsync_start - mode->vdisplay;
+ u32 hbackp = mode->htotal - mode->hsync_end;
+ u32 vbackp = mode->vtotal - mode->vsync_end;
+ u32 hss2be = hsyncw + hbackp;
+ u32 vss2be = vsyncw + vbackp;
+ u32 hss2de = htotal - hfrntp;
+ u32 vss2de = vtotal - vfrntp;
+ u32 syncs, *push;
+ int ret;
+
+ syncs = 0x00000001;
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ syncs |= 0x00000008;
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ syncs |= 0x00000010;
+
+ ret = nvd0_crtc_swap_fbs(crtc, old_fb);
+ if (ret)
+ return ret;
+
+ push = evo_wait(crtc->dev, 0, 64);
+ if (push) {
+ evo_mthd(push, 0x0410 + (nv_crtc->index * 0x300), 5);
+ evo_data(push, 0x00000000);
+ evo_data(push, (vtotal << 16) | htotal);
+ evo_data(push, (vsyncw << 16) | hsyncw);
+ evo_data(push, (vss2be << 16) | hss2be);
+ evo_data(push, (vss2de << 16) | hss2de);
+ evo_mthd(push, 0x042c + (nv_crtc->index * 0x300), 1);
+ evo_data(push, 0x00000000); /* ??? */
+ evo_mthd(push, 0x0450 + (nv_crtc->index * 0x300), 3);
+ evo_data(push, mode->clock * 1000);
+ evo_data(push, 0x00200000); /* ??? */
+ evo_data(push, mode->clock * 1000);
+ evo_mthd(push, 0x0404 + (nv_crtc->index * 0x300), 1);
+ evo_data(push, syncs);
+ evo_kick(push, crtc->dev, 0);
+ }
+
+ nv_connector = nouveau_crtc_connector_get(nv_crtc);
+ nvd0_crtc_set_dither(nv_crtc, nv_connector->use_dithering, false);
+ nvd0_crtc_set_scale(nv_crtc, nv_connector->scaling_mode, false);
+ nvd0_crtc_set_image(nv_crtc, crtc->fb, x, y, false);
+ return 0;
+}
+
+static int
+nvd0_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ int ret;
+
+ if (!crtc->fb) {
+ NV_DEBUG_KMS(crtc->dev, "No FB bound\n");
+ return 0;
+ }
+
+ ret = nvd0_crtc_swap_fbs(crtc, old_fb);
+ if (ret)
+ return ret;
+
+ nvd0_crtc_set_image(nv_crtc, crtc->fb, x, y, true);
+ return 0;
+}
+
+static int
+nvd0_crtc_mode_set_base_atomic(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb, int x, int y,
+ enum mode_set_atomic state)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ nvd0_crtc_set_image(nv_crtc, fb, x, y, true);
+ return 0;
+}
+
+static void
+nvd0_crtc_lut_load(struct drm_crtc *crtc)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ void __iomem *lut = nvbo_kmap_obj_iovirtual(nv_crtc->lut.nvbo);
+ int i;
+
+ for (i = 0; i < 256; i++) {
+ writew(0x6000 + (nv_crtc->lut.r[i] >> 2), lut + (i * 0x20) + 0);
+ writew(0x6000 + (nv_crtc->lut.g[i] >> 2), lut + (i * 0x20) + 2);
+ writew(0x6000 + (nv_crtc->lut.b[i] >> 2), lut + (i * 0x20) + 4);
+ }
+}
+
+static int
+nvd0_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
+ uint32_t handle, uint32_t width, uint32_t height)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct drm_gem_object *gem;
+ struct nouveau_bo *nvbo;
+ bool visible = (handle != 0);
+ int i, ret = 0;
+
+ if (visible) {
+ if (width != 64 || height != 64)
+ return -EINVAL;
+
+ gem = drm_gem_object_lookup(dev, file_priv, handle);
+ if (unlikely(!gem))
+ return -ENOENT;
+ nvbo = nouveau_gem_object(gem);
+
+ ret = nouveau_bo_map(nvbo);
+ if (ret == 0) {
+ for (i = 0; i < 64 * 64; i++) {
+ u32 v = nouveau_bo_rd32(nvbo, i);
+ nouveau_bo_wr32(nv_crtc->cursor.nvbo, i, v);
+ }
+ nouveau_bo_unmap(nvbo);
+ }
+
+ drm_gem_object_unreference_unlocked(gem);
+ }
+
+ if (visible != nv_crtc->cursor.visible) {
+ nvd0_crtc_cursor_show(nv_crtc, visible, true);
+ nv_crtc->cursor.visible = visible;
+ }
+
+ return ret;
+}
+
+static int
+nvd0_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ const u32 data = (y << 16) | x;
+
+ nv_wr32(crtc->dev, 0x64d084 + (nv_crtc->index * 0x1000), data);
+ nv_wr32(crtc->dev, 0x64d080 + (nv_crtc->index * 0x1000), 0x00000000);
+ return 0;
+}
+
+static void
+nvd0_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
+ uint32_t start, uint32_t size)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ u32 end = max(start + size, (u32)256);
+ u32 i;
+
+ for (i = start; i < end; i++) {
+ nv_crtc->lut.r[i] = r[i];
+ nv_crtc->lut.g[i] = g[i];
+ nv_crtc->lut.b[i] = b[i];
+ }
+
+ nvd0_crtc_lut_load(crtc);
+}
+
+static void
+nvd0_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ nouveau_bo_unmap(nv_crtc->cursor.nvbo);
+ nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo);
+ nouveau_bo_unmap(nv_crtc->lut.nvbo);
+ nouveau_bo_ref(NULL, &nv_crtc->lut.nvbo);
+ drm_crtc_cleanup(crtc);
+ kfree(crtc);
+}
+
+static const struct drm_crtc_helper_funcs nvd0_crtc_hfunc = {
+ .dpms = nvd0_crtc_dpms,
+ .prepare = nvd0_crtc_prepare,
+ .commit = nvd0_crtc_commit,
+ .mode_fixup = nvd0_crtc_mode_fixup,
+ .mode_set = nvd0_crtc_mode_set,
+ .mode_set_base = nvd0_crtc_mode_set_base,
+ .mode_set_base_atomic = nvd0_crtc_mode_set_base_atomic,
+ .load_lut = nvd0_crtc_lut_load,
+};
+
+static const struct drm_crtc_funcs nvd0_crtc_func = {
+ .cursor_set = nvd0_crtc_cursor_set,
+ .cursor_move = nvd0_crtc_cursor_move,
+ .gamma_set = nvd0_crtc_gamma_set,
+ .set_config = drm_crtc_helper_set_config,
+ .destroy = nvd0_crtc_destroy,
+};
+
+static void
+nvd0_cursor_set_pos(struct nouveau_crtc *nv_crtc, int x, int y)
+{
+}
+
+static void
+nvd0_cursor_set_offset(struct nouveau_crtc *nv_crtc, uint32_t offset)
+{
+}
+
+static int
+nvd0_crtc_create(struct drm_device *dev, int index)
+{
+ struct nouveau_crtc *nv_crtc;
+ struct drm_crtc *crtc;
+ int ret, i;
+
+ nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL);
+ if (!nv_crtc)
+ return -ENOMEM;
+
+ nv_crtc->index = index;
+ nv_crtc->set_dither = nvd0_crtc_set_dither;
+ nv_crtc->set_scale = nvd0_crtc_set_scale;
+ nv_crtc->cursor.set_offset = nvd0_cursor_set_offset;
+ nv_crtc->cursor.set_pos = nvd0_cursor_set_pos;
+ for (i = 0; i < 256; i++) {
+ nv_crtc->lut.r[i] = i << 8;
+ nv_crtc->lut.g[i] = i << 8;
+ nv_crtc->lut.b[i] = i << 8;
+ }
+
+ crtc = &nv_crtc->base;
+ drm_crtc_init(dev, crtc, &nvd0_crtc_func);
+ drm_crtc_helper_add(crtc, &nvd0_crtc_hfunc);
+ drm_mode_crtc_set_gamma_size(crtc, 256);
+
+ ret = nouveau_bo_new(dev, 64 * 64 * 4, 0x100, TTM_PL_FLAG_VRAM,
+ 0, 0x0000, &nv_crtc->cursor.nvbo);
+ if (!ret) {
+ ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM);
+ if (!ret)
+ ret = nouveau_bo_map(nv_crtc->cursor.nvbo);
+ if (ret)
+ nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo);
+ }
+
+ if (ret)
+ goto out;
+
+ ret = nouveau_bo_new(dev, 8192, 0x100, TTM_PL_FLAG_VRAM,
+ 0, 0x0000, &nv_crtc->lut.nvbo);
+ if (!ret) {
+ ret = nouveau_bo_pin(nv_crtc->lut.nvbo, TTM_PL_FLAG_VRAM);
+ if (!ret)
+ ret = nouveau_bo_map(nv_crtc->lut.nvbo);
+ if (ret)
+ nouveau_bo_ref(NULL, &nv_crtc->lut.nvbo);
+ }
+
+ if (ret)
+ goto out;
+
+ nvd0_crtc_lut_load(crtc);
+
+out:
+ if (ret)
+ nvd0_crtc_destroy(crtc);
+ return ret;
+}
+
+/******************************************************************************
+ * DAC
+ *****************************************************************************/
+static void
+nvd0_dac_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ int or = nv_encoder->or;
+ u32 dpms_ctrl;
+
+ dpms_ctrl = 0x80000000;
+ if (mode == DRM_MODE_DPMS_STANDBY || mode == DRM_MODE_DPMS_OFF)
+ dpms_ctrl |= 0x00000001;
+ if (mode == DRM_MODE_DPMS_SUSPEND || mode == DRM_MODE_DPMS_OFF)
+ dpms_ctrl |= 0x00000004;
+
+ nv_wait(dev, 0x61a004 + (or * 0x0800), 0x80000000, 0x00000000);
+ nv_mask(dev, 0x61a004 + (or * 0x0800), 0xc000007f, dpms_ctrl);
+ nv_wait(dev, 0x61a004 + (or * 0x0800), 0x80000000, 0x00000000);
+}
+
+static bool
+nvd0_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct nouveau_connector *nv_connector;
+
+ nv_connector = nouveau_encoder_connector_get(nv_encoder);
+ if (nv_connector && nv_connector->native_mode) {
+ if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
+ int id = adjusted_mode->base.id;
+ *adjusted_mode = *nv_connector->native_mode;
+ adjusted_mode->base.id = id;
+ }
+ }
+
+ return true;
+}
+
+static void
+nvd0_dac_prepare(struct drm_encoder *encoder)
+{
+}
+
+static void
+nvd0_dac_commit(struct drm_encoder *encoder)
+{
+}
+
+static void
+nvd0_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+ u32 *push;
+
+ nvd0_dac_dpms(encoder, DRM_MODE_DPMS_ON);
+
+ push = evo_wait(encoder->dev, 0, 4);
+ if (push) {
+ evo_mthd(push, 0x0180 + (nv_encoder->or * 0x20), 2);
+ evo_data(push, 1 << nv_crtc->index);
+ evo_data(push, 0x00ff);
+ evo_kick(push, encoder->dev, 0);
+ }
+
+ nv_encoder->crtc = encoder->crtc;
+}
+
+static void
+nvd0_dac_disconnect(struct drm_encoder *encoder)
+{
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ u32 *push;
+
+ if (nv_encoder->crtc) {
+ nvd0_crtc_prepare(nv_encoder->crtc);
+
+ push = evo_wait(dev, 0, 4);
+ if (push) {
+ evo_mthd(push, 0x0180 + (nv_encoder->or * 0x20), 1);
+ evo_data(push, 0x00000000);
+ evo_mthd(push, 0x0080, 1);
+ evo_data(push, 0x00000000);
+ evo_kick(push, dev, 0);
+ }
+
+ nv_encoder->crtc = NULL;
+ }
+}
+
+static enum drm_connector_status
+nvd0_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ enum drm_connector_status status = connector_status_disconnected;
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ int or = nv_encoder->or;
+ u32 load;
+
+ nv_wr32(dev, 0x61a00c + (or * 0x800), 0x00100000);
+ udelay(9500);
+ nv_wr32(dev, 0x61a00c + (or * 0x800), 0x80000000);
+
+ load = nv_rd32(dev, 0x61a00c + (or * 0x800));
+ if ((load & 0x38000000) == 0x38000000)
+ status = connector_status_connected;
+
+ nv_wr32(dev, 0x61a00c + (or * 0x800), 0x00000000);
+ return status;
+}
+
+static void
+nvd0_dac_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+ kfree(encoder);
+}
+
+static const struct drm_encoder_helper_funcs nvd0_dac_hfunc = {
+ .dpms = nvd0_dac_dpms,
+ .mode_fixup = nvd0_dac_mode_fixup,
+ .prepare = nvd0_dac_prepare,
+ .commit = nvd0_dac_commit,
+ .mode_set = nvd0_dac_mode_set,
+ .disable = nvd0_dac_disconnect,
+ .get_crtc = nvd0_display_crtc_get,
+ .detect = nvd0_dac_detect
+};
+
+static const struct drm_encoder_funcs nvd0_dac_func = {
+ .destroy = nvd0_dac_destroy,
+};
+
+static int
+nvd0_dac_create(struct drm_connector *connector, struct dcb_entry *dcbe)
+{
+ struct drm_device *dev = connector->dev;
+ struct nouveau_encoder *nv_encoder;
+ struct drm_encoder *encoder;
+
+ nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
+ if (!nv_encoder)
+ return -ENOMEM;
+ nv_encoder->dcb = dcbe;
+ nv_encoder->or = ffs(dcbe->or) - 1;
+
+ encoder = to_drm_encoder(nv_encoder);
+ encoder->possible_crtcs = dcbe->heads;
+ encoder->possible_clones = 0;
+ drm_encoder_init(dev, encoder, &nvd0_dac_func, DRM_MODE_ENCODER_DAC);
+ drm_encoder_helper_add(encoder, &nvd0_dac_hfunc);
+
+ drm_mode_connector_attach_encoder(connector, encoder);
+ return 0;
+}
+
+/******************************************************************************
+ * SOR
+ *****************************************************************************/
+static void
+nvd0_sor_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct drm_encoder *partner;
+ int or = nv_encoder->or;
+ u32 dpms_ctrl;
+
+ nv_encoder->last_dpms = mode;
+
+ list_for_each_entry(partner, &dev->mode_config.encoder_list, head) {
+ struct nouveau_encoder *nv_partner = nouveau_encoder(partner);
+
+ if (partner->encoder_type != DRM_MODE_ENCODER_TMDS)
+ continue;
+
+ if (nv_partner != nv_encoder &&
+ nv_partner->dcb->or == nv_encoder->or) {
+ if (nv_partner->last_dpms == DRM_MODE_DPMS_ON)
+ return;
+ break;
+ }
+ }
+
+ dpms_ctrl = (mode == DRM_MODE_DPMS_ON);
+ dpms_ctrl |= 0x80000000;
+
+ nv_wait(dev, 0x61c004 + (or * 0x0800), 0x80000000, 0x00000000);
+ nv_mask(dev, 0x61c004 + (or * 0x0800), 0x80000001, dpms_ctrl);
+ nv_wait(dev, 0x61c004 + (or * 0x0800), 0x80000000, 0x00000000);
+ nv_wait(dev, 0x61c030 + (or * 0x0800), 0x10000000, 0x00000000);
+}
+
+static bool
+nvd0_sor_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct nouveau_connector *nv_connector;
+
+ nv_connector = nouveau_encoder_connector_get(nv_encoder);
+ if (nv_connector && nv_connector->native_mode) {
+ if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
+ int id = adjusted_mode->base.id;
+ *adjusted_mode = *nv_connector->native_mode;
+ adjusted_mode->base.id = id;
+ }
+ }
+
+ return true;
+}
+
+static void
+nvd0_sor_prepare(struct drm_encoder *encoder)
+{
+}
+
+static void
+nvd0_sor_commit(struct drm_encoder *encoder)
+{
+}
+
+static void
+nvd0_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *umode,
+ struct drm_display_mode *mode)
+{
+ struct drm_nouveau_private *dev_priv = encoder->dev->dev_private;
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+ struct nouveau_connector *nv_connector;
+ struct nvbios *bios = &dev_priv->vbios;
+ u32 mode_ctrl = (1 << nv_crtc->index);
+ u32 *push, or_config;
+
+ nv_connector = nouveau_encoder_connector_get(nv_encoder);
+ switch (nv_encoder->dcb->type) {
+ case OUTPUT_TMDS:
+ if (nv_encoder->dcb->sorconf.link & 1) {
+ if (mode->clock < 165000)
+ mode_ctrl |= 0x00000100;
+ else
+ mode_ctrl |= 0x00000500;
+ } else {
+ mode_ctrl |= 0x00000200;
+ }
+
+ or_config = (mode_ctrl & 0x00000f00) >> 8;
+ if (mode->clock >= 165000)
+ or_config |= 0x0100;
+ break;
+ case OUTPUT_LVDS:
+ or_config = (mode_ctrl & 0x00000f00) >> 8;
+ if (bios->fp_no_ddc) {
+ if (bios->fp.dual_link)
+ or_config |= 0x0100;
+ if (bios->fp.if_is_24bit)
+ or_config |= 0x0200;
+ } else {
+ if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS_SPWG) {
+ if (((u8 *)nv_connector->edid)[121] == 2)
+ or_config |= 0x0100;
+ } else
+ if (mode->clock >= bios->fp.duallink_transition_clk) {
+ or_config |= 0x0100;
+ }
+
+ if (or_config & 0x0100) {
+ if (bios->fp.strapless_is_24bit & 2)
+ or_config |= 0x0200;
+ } else {
+ if (bios->fp.strapless_is_24bit & 1)
+ or_config |= 0x0200;
+ }
+
+ if (nv_connector->base.display_info.bpc == 8)
+ or_config |= 0x0200;
+
+ }
+ break;
+ default:
+ BUG_ON(1);
+ break;
+ }
+
+ nvd0_sor_dpms(encoder, DRM_MODE_DPMS_ON);
+
+ push = evo_wait(encoder->dev, 0, 4);
+ if (push) {
+ evo_mthd(push, 0x0200 + (nv_encoder->or * 0x20), 2);
+ evo_data(push, mode_ctrl);
+ evo_data(push, or_config);
+ evo_kick(push, encoder->dev, 0);
+ }
+
+ nv_encoder->crtc = encoder->crtc;
+}
+
+static void
+nvd0_sor_disconnect(struct drm_encoder *encoder)
+{
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ u32 *push;
+
+ if (nv_encoder->crtc) {
+ nvd0_crtc_prepare(nv_encoder->crtc);
+
+ push = evo_wait(dev, 0, 4);
+ if (push) {
+ evo_mthd(push, 0x0200 + (nv_encoder->or * 0x20), 1);
+ evo_data(push, 0x00000000);
+ evo_mthd(push, 0x0080, 1);
+ evo_data(push, 0x00000000);
+ evo_kick(push, dev, 0);
+ }
+
+ nv_encoder->crtc = NULL;
+ nv_encoder->last_dpms = DRM_MODE_DPMS_OFF;
+ }
+}
+
+static void
+nvd0_sor_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+ kfree(encoder);
+}
+
+static const struct drm_encoder_helper_funcs nvd0_sor_hfunc = {
+ .dpms = nvd0_sor_dpms,
+ .mode_fixup = nvd0_sor_mode_fixup,
+ .prepare = nvd0_sor_prepare,
+ .commit = nvd0_sor_commit,
+ .mode_set = nvd0_sor_mode_set,
+ .disable = nvd0_sor_disconnect,
+ .get_crtc = nvd0_display_crtc_get,
+};
+
+static const struct drm_encoder_funcs nvd0_sor_func = {
+ .destroy = nvd0_sor_destroy,
+};
+
+static int
+nvd0_sor_create(struct drm_connector *connector, struct dcb_entry *dcbe)
+{
+ struct drm_device *dev = connector->dev;
+ struct nouveau_encoder *nv_encoder;
+ struct drm_encoder *encoder;
+
+ nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
+ if (!nv_encoder)
+ return -ENOMEM;
+ nv_encoder->dcb = dcbe;
+ nv_encoder->or = ffs(dcbe->or) - 1;
+ nv_encoder->last_dpms = DRM_MODE_DPMS_OFF;
+
+ encoder = to_drm_encoder(nv_encoder);
+ encoder->possible_crtcs = dcbe->heads;
+ encoder->possible_clones = 0;
+ drm_encoder_init(dev, encoder, &nvd0_sor_func, DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(encoder, &nvd0_sor_hfunc);
+
+ drm_mode_connector_attach_encoder(connector, encoder);
+ return 0;
+}
+
+/******************************************************************************
+ * IRQ
+ *****************************************************************************/
+static struct dcb_entry *
+lookup_dcb(struct drm_device *dev, int id, u32 mc)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ int type, or, i;
+
+ if (id < 4) {
+ type = OUTPUT_ANALOG;
+ or = id;
+ } else {
+ switch (mc & 0x00000f00) {
+ case 0x00000000: type = OUTPUT_LVDS; break;
+ case 0x00000100: type = OUTPUT_TMDS; break;
+ case 0x00000200: type = OUTPUT_TMDS; break;
+ case 0x00000500: type = OUTPUT_TMDS; break;
+ default:
+ NV_ERROR(dev, "PDISP: unknown SOR mc 0x%08x\n", mc);
+ return NULL;
+ }
+
+ or = id - 4;
+ }
+
+ for (i = 0; i < dev_priv->vbios.dcb.entries; i++) {
+ struct dcb_entry *dcb = &dev_priv->vbios.dcb.entry[i];
+ if (dcb->type == type && (dcb->or & (1 << or)))
+ return dcb;
+ }
+
+ NV_ERROR(dev, "PDISP: DCB for %d/0x%08x not found\n", id, mc);
+ return NULL;
+}
+
+static void
+nvd0_display_unk1_handler(struct drm_device *dev, u32 crtc, u32 mask)
+{
+ struct dcb_entry *dcb;
+ int i;
+
+ for (i = 0; mask && i < 8; i++) {
+ u32 mcc = nv_rd32(dev, 0x640180 + (i * 0x20));
+ if (!(mcc & (1 << crtc)))
+ continue;
+
+ dcb = lookup_dcb(dev, i, mcc);
+ if (!dcb)
+ continue;
+
+ nouveau_bios_run_display_table(dev, 0x0000, -1, dcb, crtc);
+ }
+
+ nv_wr32(dev, 0x6101d4, 0x00000000);
+ nv_wr32(dev, 0x6109d4, 0x00000000);
+ nv_wr32(dev, 0x6101d0, 0x80000000);
+}
+
+static void
+nvd0_display_unk2_handler(struct drm_device *dev, u32 crtc, u32 mask)
+{
+ struct dcb_entry *dcb;
+ u32 or, tmp, pclk;
+ int i;
+
+ for (i = 0; mask && i < 8; i++) {
+ u32 mcc = nv_rd32(dev, 0x640180 + (i * 0x20));
+ if (!(mcc & (1 << crtc)))
+ continue;
+
+ dcb = lookup_dcb(dev, i, mcc);
+ if (!dcb)
+ continue;
+
+ nouveau_bios_run_display_table(dev, 0x0000, -2, dcb, crtc);
+ }
+
+ pclk = nv_rd32(dev, 0x660450 + (crtc * 0x300)) / 1000;
+ if (mask & 0x00010000) {
+ nv50_crtc_set_clock(dev, crtc, pclk);
+ }
+
+ for (i = 0; mask && i < 8; i++) {
+ u32 mcp = nv_rd32(dev, 0x660180 + (i * 0x20));
+ u32 cfg = nv_rd32(dev, 0x660184 + (i * 0x20));
+ if (!(mcp & (1 << crtc)))
+ continue;
+
+ dcb = lookup_dcb(dev, i, mcp);
+ if (!dcb)
+ continue;
+ or = ffs(dcb->or) - 1;
+
+ nouveau_bios_run_display_table(dev, cfg, pclk, dcb, crtc);
+
+ nv_wr32(dev, 0x612200 + (crtc * 0x800), 0x00000000);
+ switch (dcb->type) {
+ case OUTPUT_ANALOG:
+ nv_wr32(dev, 0x612280 + (or * 0x800), 0x00000000);
+ break;
+ case OUTPUT_TMDS:
+ case OUTPUT_LVDS:
+ if (cfg & 0x00000100)
+ tmp = 0x00000101;
+ else
+ tmp = 0x00000000;
+
+ nv_mask(dev, 0x612300 + (or * 0x800), 0x00000707, tmp);
+ break;
+ default:
+ break;
+ }
+
+ break;
+ }
+
+ nv_wr32(dev, 0x6101d4, 0x00000000);
+ nv_wr32(dev, 0x6109d4, 0x00000000);
+ nv_wr32(dev, 0x6101d0, 0x80000000);
+}
+
+static void
+nvd0_display_unk4_handler(struct drm_device *dev, u32 crtc, u32 mask)
+{
+ struct dcb_entry *dcb;
+ int pclk, i;
+
+ pclk = nv_rd32(dev, 0x660450 + (crtc * 0x300)) / 1000;
+
+ for (i = 0; mask && i < 8; i++) {
+ u32 mcp = nv_rd32(dev, 0x660180 + (i * 0x20));
+ u32 cfg = nv_rd32(dev, 0x660184 + (i * 0x20));
+ if (!(mcp & (1 << crtc)))
+ continue;
+
+ dcb = lookup_dcb(dev, i, mcp);
+ if (!dcb)
+ continue;
+
+ nouveau_bios_run_display_table(dev, cfg, -pclk, dcb, crtc);
+ }
+
+ nv_wr32(dev, 0x6101d4, 0x00000000);
+ nv_wr32(dev, 0x6109d4, 0x00000000);
+ nv_wr32(dev, 0x6101d0, 0x80000000);
+}
+
+static void
+nvd0_display_bh(unsigned long data)
+{
+ struct drm_device *dev = (struct drm_device *)data;
+ struct nvd0_display *disp = nvd0_display(dev);
+ u32 mask, crtc;
+ int i;
+
+ if (drm_debug & (DRM_UT_DRIVER | DRM_UT_KMS)) {
+ NV_INFO(dev, "PDISP: modeset req %d\n", disp->modeset);
+ NV_INFO(dev, " STAT: 0x%08x 0x%08x 0x%08x\n",
+ nv_rd32(dev, 0x6101d0),
+ nv_rd32(dev, 0x6101d4), nv_rd32(dev, 0x6109d4));
+ for (i = 0; i < 8; i++) {
+ NV_INFO(dev, " %s%d: 0x%08x 0x%08x\n",
+ i < 4 ? "DAC" : "SOR", i,
+ nv_rd32(dev, 0x640180 + (i * 0x20)),
+ nv_rd32(dev, 0x660180 + (i * 0x20)));
+ }
+ }
+
+ mask = nv_rd32(dev, 0x6101d4);
+ crtc = 0;
+ if (!mask) {
+ mask = nv_rd32(dev, 0x6109d4);
+ crtc = 1;
+ }
+
+ if (disp->modeset & 0x00000001)
+ nvd0_display_unk1_handler(dev, crtc, mask);
+ if (disp->modeset & 0x00000002)
+ nvd0_display_unk2_handler(dev, crtc, mask);
+ if (disp->modeset & 0x00000004)
+ nvd0_display_unk4_handler(dev, crtc, mask);
+}
+
+static void
+nvd0_display_intr(struct drm_device *dev)
+{
+ struct nvd0_display *disp = nvd0_display(dev);
+ u32 intr = nv_rd32(dev, 0x610088);
+
+ if (intr & 0x00000002) {
+ u32 stat = nv_rd32(dev, 0x61009c);
+ int chid = ffs(stat) - 1;
+ if (chid >= 0) {
+ u32 mthd = nv_rd32(dev, 0x6101f0 + (chid * 12));
+ u32 data = nv_rd32(dev, 0x6101f4 + (chid * 12));
+ u32 unkn = nv_rd32(dev, 0x6101f8 + (chid * 12));
+
+ NV_INFO(dev, "EvoCh: chid %d mthd 0x%04x data 0x%08x "
+ "0x%08x 0x%08x\n",
+ chid, (mthd & 0x0000ffc), data, mthd, unkn);
+ nv_wr32(dev, 0x61009c, (1 << chid));
+ nv_wr32(dev, 0x6101f0 + (chid * 12), 0x90000000);
+ }
+
+ intr &= ~0x00000002;
+ }
+
+ if (intr & 0x00100000) {
+ u32 stat = nv_rd32(dev, 0x6100ac);
+
+ if (stat & 0x00000007) {
+ disp->modeset = stat;
+ tasklet_schedule(&disp->tasklet);
+
+ nv_wr32(dev, 0x6100ac, (stat & 0x00000007));
+ stat &= ~0x00000007;
+ }
+
+ if (stat) {
+ NV_INFO(dev, "PDISP: unknown intr24 0x%08x\n", stat);
+ nv_wr32(dev, 0x6100ac, stat);
+ }
+
+ intr &= ~0x00100000;
+ }
+
+ if (intr & 0x01000000) {
+ u32 stat = nv_rd32(dev, 0x6100bc);
+ nv_wr32(dev, 0x6100bc, stat);
+ intr &= ~0x01000000;
+ }
+
+ if (intr & 0x02000000) {
+ u32 stat = nv_rd32(dev, 0x6108bc);
+ nv_wr32(dev, 0x6108bc, stat);
+ intr &= ~0x02000000;
+ }
+
+ if (intr)
+ NV_INFO(dev, "PDISP: unknown intr 0x%08x\n", intr);
+}
+
+/******************************************************************************
+ * Init
+ *****************************************************************************/
+static void
+nvd0_display_fini(struct drm_device *dev)
+{
+ int i;
+
+ /* fini cursors */
+ for (i = 14; i >= 13; i--) {
+ if (!(nv_rd32(dev, 0x610490 + (i * 0x10)) & 0x00000001))
+ continue;
+
+ nv_mask(dev, 0x610490 + (i * 0x10), 0x00000001, 0x00000000);
+ nv_wait(dev, 0x610490 + (i * 0x10), 0x00010000, 0x00000000);
+ nv_mask(dev, 0x610090, 1 << i, 0x00000000);
+ nv_mask(dev, 0x6100a0, 1 << i, 0x00000000);
+ }
+
+ /* fini master */
+ if (nv_rd32(dev, 0x610490) & 0x00000010) {
+ nv_mask(dev, 0x610490, 0x00000010, 0x00000000);
+ nv_mask(dev, 0x610490, 0x00000003, 0x00000000);
+ nv_wait(dev, 0x610490, 0x80000000, 0x00000000);
+ nv_mask(dev, 0x610090, 0x00000001, 0x00000000);
+ nv_mask(dev, 0x6100a0, 0x00000001, 0x00000000);
+ }
+}
+
+int
+nvd0_display_init(struct drm_device *dev)
+{
+ struct nvd0_display *disp = nvd0_display(dev);
+ u32 *push;
+ int i;
+
+ if (nv_rd32(dev, 0x6100ac) & 0x00000100) {
+ nv_wr32(dev, 0x6100ac, 0x00000100);
+ nv_mask(dev, 0x6194e8, 0x00000001, 0x00000000);
+ if (!nv_wait(dev, 0x6194e8, 0x00000002, 0x00000000)) {
+ NV_ERROR(dev, "PDISP: 0x6194e8 0x%08x\n",
+ nv_rd32(dev, 0x6194e8));
+ return -EBUSY;
+ }
+ }
+
+ /* nfi what these are exactly, i do know that SOR_MODE_CTRL won't
+ * work at all unless you do the SOR part below.
+ */
+ for (i = 0; i < 3; i++) {
+ u32 dac = nv_rd32(dev, 0x61a000 + (i * 0x800));
+ nv_wr32(dev, 0x6101c0 + (i * 0x800), dac);
+ }
+
+ for (i = 0; i < 4; i++) {
+ u32 sor = nv_rd32(dev, 0x61c000 + (i * 0x800));
+ nv_wr32(dev, 0x6301c4 + (i * 0x800), sor);
+ }
+
+ for (i = 0; i < 2; i++) {
+ u32 crtc0 = nv_rd32(dev, 0x616104 + (i * 0x800));
+ u32 crtc1 = nv_rd32(dev, 0x616108 + (i * 0x800));
+ u32 crtc2 = nv_rd32(dev, 0x61610c + (i * 0x800));
+ nv_wr32(dev, 0x6101b4 + (i * 0x800), crtc0);
+ nv_wr32(dev, 0x6101b8 + (i * 0x800), crtc1);
+ nv_wr32(dev, 0x6101bc + (i * 0x800), crtc2);
+ }
+
+ /* point at our hash table / objects, enable interrupts */
+ nv_wr32(dev, 0x610010, (disp->mem->vinst >> 8) | 9);
+ nv_mask(dev, 0x6100b0, 0x00000307, 0x00000307);
+
+ /* init master */
+ nv_wr32(dev, 0x610494, (disp->evo[0].handle >> 8) | 3);
+ nv_wr32(dev, 0x610498, 0x00010000);
+ nv_wr32(dev, 0x61049c, 0x00000001);
+ nv_mask(dev, 0x610490, 0x00000010, 0x00000010);
+ nv_wr32(dev, 0x640000, 0x00000000);
+ nv_wr32(dev, 0x610490, 0x01000013);
+ if (!nv_wait(dev, 0x610490, 0x80000000, 0x00000000)) {
+ NV_ERROR(dev, "PDISP: master 0x%08x\n",
+ nv_rd32(dev, 0x610490));
+ return -EBUSY;
+ }
+ nv_mask(dev, 0x610090, 0x00000001, 0x00000001);
+ nv_mask(dev, 0x6100a0, 0x00000001, 0x00000001);
+
+ /* init cursors */
+ for (i = 13; i <= 14; i++) {
+ nv_wr32(dev, 0x610490 + (i * 0x10), 0x00000001);
+ if (!nv_wait(dev, 0x610490 + (i * 0x10), 0x00010000, 0x00010000)) {
+ NV_ERROR(dev, "PDISP: curs%d 0x%08x\n", i,
+ nv_rd32(dev, 0x610490 + (i * 0x10)));
+ return -EBUSY;
+ }
+
+ nv_mask(dev, 0x610090, 1 << i, 1 << i);
+ nv_mask(dev, 0x6100a0, 1 << i, 1 << i);
+ }
+
+ push = evo_wait(dev, 0, 32);
+ if (!push)
+ return -EBUSY;
+ evo_mthd(push, 0x0088, 1);
+ evo_data(push, NvEvoSync);
+ evo_mthd(push, 0x0084, 1);
+ evo_data(push, 0x00000000);
+ evo_mthd(push, 0x0084, 1);
+ evo_data(push, 0x80000000);
+ evo_mthd(push, 0x008c, 1);
+ evo_data(push, 0x00000000);
+ evo_kick(push, dev, 0);
+
+ return 0;
+}
+
+void
+nvd0_display_destroy(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nvd0_display *disp = nvd0_display(dev);
+ struct pci_dev *pdev = dev->pdev;
+
+ nvd0_display_fini(dev);
+
+ pci_free_consistent(pdev, PAGE_SIZE, disp->evo[0].ptr, disp->evo[0].handle);
+ nouveau_gpuobj_ref(NULL, &disp->mem);
+ nouveau_irq_unregister(dev, 26);
+
+ dev_priv->engine.display.priv = NULL;
+ kfree(disp);
+}
+
+int
+nvd0_display_create(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_instmem_engine *pinstmem = &dev_priv->engine.instmem;
+ struct dcb_table *dcb = &dev_priv->vbios.dcb;
+ struct drm_connector *connector, *tmp;
+ struct pci_dev *pdev = dev->pdev;
+ struct nvd0_display *disp;
+ struct dcb_entry *dcbe;
+ int ret, i;
+
+ disp = kzalloc(sizeof(*disp), GFP_KERNEL);
+ if (!disp)
+ return -ENOMEM;
+ dev_priv->engine.display.priv = disp;
+
+ /* create crtc objects to represent the hw heads */
+ for (i = 0; i < 2; i++) {
+ ret = nvd0_crtc_create(dev, i);
+ if (ret)
+ goto out;
+ }
+
+ /* create encoder/connector objects based on VBIOS DCB table */
+ for (i = 0, dcbe = &dcb->entry[0]; i < dcb->entries; i++, dcbe++) {
+ connector = nouveau_connector_create(dev, dcbe->connector);
+ if (IS_ERR(connector))
+ continue;
+
+ if (dcbe->location != DCB_LOC_ON_CHIP) {
+ NV_WARN(dev, "skipping off-chip encoder %d/%d\n",
+ dcbe->type, ffs(dcbe->or) - 1);
+ continue;
+ }
+
+ switch (dcbe->type) {
+ case OUTPUT_TMDS:
+ case OUTPUT_LVDS:
+ nvd0_sor_create(connector, dcbe);
+ break;
+ case OUTPUT_ANALOG:
+ nvd0_dac_create(connector, dcbe);
+ break;
+ default:
+ NV_WARN(dev, "skipping unsupported encoder %d/%d\n",
+ dcbe->type, ffs(dcbe->or) - 1);
+ continue;
+ }
+ }
+
+ /* cull any connectors we created that don't have an encoder */
+ list_for_each_entry_safe(connector, tmp, &dev->mode_config.connector_list, head) {
+ if (connector->encoder_ids[0])
+ continue;
+
+ NV_WARN(dev, "%s has no encoders, removing\n",
+ drm_get_connector_name(connector));
+ connector->funcs->destroy(connector);
+ }
+
+ /* setup interrupt handling */
+ tasklet_init(&disp->tasklet, nvd0_display_bh, (unsigned long)dev);
+ nouveau_irq_register(dev, 26, nvd0_display_intr);
+
+ /* hash table and dma objects for the memory areas we care about */
+ ret = nouveau_gpuobj_new(dev, NULL, 0x4000, 0x10000,
+ NVOBJ_FLAG_ZERO_ALLOC, &disp->mem);
+ if (ret)
+ goto out;
+
+ nv_wo32(disp->mem, 0x1000, 0x00000049);
+ nv_wo32(disp->mem, 0x1004, (disp->mem->vinst + 0x2000) >> 8);
+ nv_wo32(disp->mem, 0x1008, (disp->mem->vinst + 0x2fff) >> 8);
+ nv_wo32(disp->mem, 0x100c, 0x00000000);
+ nv_wo32(disp->mem, 0x1010, 0x00000000);
+ nv_wo32(disp->mem, 0x1014, 0x00000000);
+ nv_wo32(disp->mem, 0x0000, NvEvoSync);
+ nv_wo32(disp->mem, 0x0004, (0x1000 << 9) | 0x00000001);
+
+ nv_wo32(disp->mem, 0x1020, 0x00000049);
+ nv_wo32(disp->mem, 0x1024, 0x00000000);
+ nv_wo32(disp->mem, 0x1028, (dev_priv->vram_size - 1) >> 8);
+ nv_wo32(disp->mem, 0x102c, 0x00000000);
+ nv_wo32(disp->mem, 0x1030, 0x00000000);
+ nv_wo32(disp->mem, 0x1034, 0x00000000);
+ nv_wo32(disp->mem, 0x0008, NvEvoVRAM);
+ nv_wo32(disp->mem, 0x000c, (0x1020 << 9) | 0x00000001);
+
+ nv_wo32(disp->mem, 0x1040, 0x00000009);
+ nv_wo32(disp->mem, 0x1044, 0x00000000);
+ nv_wo32(disp->mem, 0x1048, (dev_priv->vram_size - 1) >> 8);
+ nv_wo32(disp->mem, 0x104c, 0x00000000);
+ nv_wo32(disp->mem, 0x1050, 0x00000000);
+ nv_wo32(disp->mem, 0x1054, 0x00000000);
+ nv_wo32(disp->mem, 0x0010, NvEvoVRAM_LP);
+ nv_wo32(disp->mem, 0x0014, (0x1040 << 9) | 0x00000001);
+
+ nv_wo32(disp->mem, 0x1060, 0x0fe00009);
+ nv_wo32(disp->mem, 0x1064, 0x00000000);
+ nv_wo32(disp->mem, 0x1068, (dev_priv->vram_size - 1) >> 8);
+ nv_wo32(disp->mem, 0x106c, 0x00000000);
+ nv_wo32(disp->mem, 0x1070, 0x00000000);
+ nv_wo32(disp->mem, 0x1074, 0x00000000);
+ nv_wo32(disp->mem, 0x0018, NvEvoFB32);
+ nv_wo32(disp->mem, 0x001c, (0x1060 << 9) | 0x00000001);
+
+ pinstmem->flush(dev);
+
+ /* push buffers for evo channels */
+ disp->evo[0].ptr =
+ pci_alloc_consistent(pdev, PAGE_SIZE, &disp->evo[0].handle);
+ if (!disp->evo[0].ptr) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = nvd0_display_init(dev);
+ if (ret)
+ goto out;
+
+out:
+ if (ret)
+ nvd0_display_destroy(dev);
+ return ret;
+}
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index c4ffa14f..ed406e8 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -39,7 +39,7 @@
static void evergreen_gpu_init(struct radeon_device *rdev);
void evergreen_fini(struct radeon_device *rdev);
-static void evergreen_pcie_gen2_enable(struct radeon_device *rdev);
+void evergreen_pcie_gen2_enable(struct radeon_device *rdev);
void evergreen_fix_pci_max_read_req_size(struct radeon_device *rdev)
{
@@ -935,6 +935,9 @@
WREG32(VM_CONTEXT1_CNTL, 0);
evergreen_pcie_gart_tlb_flush(rdev);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)rdev->gart.table_addr);
rdev->gart.ready = true;
return 0;
}
@@ -2586,7 +2589,7 @@
return 0;
}
-static inline void evergreen_irq_ack(struct radeon_device *rdev)
+static void evergreen_irq_ack(struct radeon_device *rdev)
{
u32 tmp;
@@ -2697,7 +2700,7 @@
r600_rlc_stop(rdev);
}
-static inline u32 evergreen_get_ih_wptr(struct radeon_device *rdev)
+static u32 evergreen_get_ih_wptr(struct radeon_device *rdev)
{
u32 wptr, tmp;
@@ -3003,8 +3006,7 @@
int r;
/* enable pcie gen2 link */
- if (!ASIC_IS_DCE5(rdev))
- evergreen_pcie_gen2_enable(rdev);
+ evergreen_pcie_gen2_enable(rdev);
if (ASIC_IS_DCE5(rdev)) {
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
@@ -3041,7 +3043,7 @@
r = evergreen_blit_init(rdev);
if (r) {
- evergreen_blit_fini(rdev);
+ r600_blit_fini(rdev);
rdev->asic->copy = NULL;
dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
}
@@ -3107,45 +3109,14 @@
int evergreen_suspend(struct radeon_device *rdev)
{
- int r;
-
/* FIXME: we should wait for ring to be empty */
r700_cp_stop(rdev);
rdev->cp.ready = false;
evergreen_irq_suspend(rdev);
radeon_wb_disable(rdev);
evergreen_pcie_gart_disable(rdev);
+ r600_blit_suspend(rdev);
- /* unpin shaders bo */
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (likely(r == 0)) {
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
- }
-
- return 0;
-}
-
-int evergreen_copy_blit(struct radeon_device *rdev,
- uint64_t src_offset,
- uint64_t dst_offset,
- unsigned num_gpu_pages,
- struct radeon_fence *fence)
-{
- int r;
-
- mutex_lock(&rdev->r600_blit.mutex);
- rdev->r600_blit.vb_ib = NULL;
- r = evergreen_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
- if (r) {
- if (rdev->r600_blit.vb_ib)
- radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
- mutex_unlock(&rdev->r600_blit.mutex);
- return r;
- }
- evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
- evergreen_blit_done_copy(rdev, fence);
- mutex_unlock(&rdev->r600_blit.mutex);
return 0;
}
@@ -3257,7 +3228,7 @@
void evergreen_fini(struct radeon_device *rdev)
{
- evergreen_blit_fini(rdev);
+ r600_blit_fini(rdev);
r700_cp_fini(rdev);
r600_irq_fini(rdev);
radeon_wb_fini(rdev);
@@ -3273,7 +3244,7 @@
rdev->bios = NULL;
}
-static void evergreen_pcie_gen2_enable(struct radeon_device *rdev)
+void evergreen_pcie_gen2_enable(struct radeon_device *rdev)
{
u32 link_width_cntl, speed_cntl;
diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
index 2eb2518..dcf11bb 100644
--- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c
+++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
@@ -56,7 +56,9 @@
if (h < 8)
h = 8;
- cb_color_info = ((format << 2) | (1 << 24) | (1 << 8));
+ cb_color_info = CB_FORMAT(format) |
+ CB_SOURCE_FORMAT(CB_SF_EXPORT_NORM) |
+ CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
pitch = (w / 8) - 1;
slice = ((w * h) / 64) - 1;
@@ -67,7 +69,7 @@
radeon_ring_write(rdev, slice);
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, cb_color_info);
- radeon_ring_write(rdev, (1 << 4));
+ radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, (w - 1) | ((h - 1) << 16));
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, 0);
@@ -133,12 +135,16 @@
u32 sq_vtx_constant_word2, sq_vtx_constant_word3;
/* high addr, stride */
- sq_vtx_constant_word2 = ((upper_32_bits(gpu_addr) & 0xff) | (16 << 8));
+ sq_vtx_constant_word2 = SQ_VTXC_BASE_ADDR_HI(upper_32_bits(gpu_addr) & 0xff) |
+ SQ_VTXC_STRIDE(16);
#ifdef __BIG_ENDIAN
- sq_vtx_constant_word2 |= (2 << 30);
+ sq_vtx_constant_word2 |= SQ_VTXC_ENDIAN_SWAP(SQ_ENDIAN_8IN32);
#endif
/* xyzw swizzles */
- sq_vtx_constant_word3 = (0 << 3) | (1 << 6) | (2 << 9) | (3 << 12);
+ sq_vtx_constant_word3 = SQ_VTCX_SEL_X(SQ_SEL_X) |
+ SQ_VTCX_SEL_Y(SQ_SEL_Y) |
+ SQ_VTCX_SEL_Z(SQ_SEL_Z) |
+ SQ_VTCX_SEL_W(SQ_SEL_W);
radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 8));
radeon_ring_write(rdev, 0x580);
@@ -149,7 +155,7 @@
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, SQ_TEX_VTX_VALID_BUFFER << 30);
+ radeon_ring_write(rdev, S__SQ_CONSTANT_TYPE(SQ_TEX_VTX_VALID_BUFFER));
if ((rdev->family == CHIP_CEDAR) ||
(rdev->family == CHIP_PALM) ||
@@ -176,14 +182,19 @@
if (h < 1)
h = 1;
- sq_tex_resource_word0 = (1 << 0); /* 2D */
+ sq_tex_resource_word0 = TEX_DIM(SQ_TEX_DIM_2D);
sq_tex_resource_word0 |= ((((pitch >> 3) - 1) << 6) |
((w - 1) << 18));
- sq_tex_resource_word1 = ((h - 1) << 0) | (1 << 28);
+ sq_tex_resource_word1 = ((h - 1) << 0) |
+ TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
/* xyzw swizzles */
- sq_tex_resource_word4 = (0 << 16) | (1 << 19) | (2 << 22) | (3 << 25);
+ sq_tex_resource_word4 = TEX_DST_SEL_X(SQ_SEL_X) |
+ TEX_DST_SEL_Y(SQ_SEL_Y) |
+ TEX_DST_SEL_Z(SQ_SEL_Z) |
+ TEX_DST_SEL_W(SQ_SEL_W);
- sq_tex_resource_word7 = format | (SQ_TEX_VTX_VALID_TEXTURE << 30);
+ sq_tex_resource_word7 = format |
+ S__SQ_CONSTANT_TYPE(SQ_TEX_VTX_VALID_TEXTURE);
radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 8));
radeon_ring_write(rdev, 0);
@@ -584,31 +595,6 @@
}
-static inline uint32_t i2f(uint32_t input)
-{
- u32 result, i, exponent, fraction;
-
- if ((input & 0x3fff) == 0)
- result = 0; /* 0 is a special case */
- else {
- exponent = 140; /* exponent biased by 127; */
- fraction = (input & 0x3fff) << 10; /* cheat and only
- handle numbers below 2^^15 */
- for (i = 0; i < 14; i++) {
- if (fraction & 0x800000)
- break;
- else {
- fraction = fraction << 1; /* keep
- shifting left until top bit = 1 */
- exponent = exponent - 1;
- }
- }
- result = exponent << 23 | (fraction & 0x7fffff); /* mask
- off top bit; assumed 1 */
- }
- return result;
-}
-
int evergreen_blit_init(struct radeon_device *rdev)
{
u32 obj_size;
@@ -617,6 +603,24 @@
u32 packet2s[16];
int num_packet2s = 0;
+ rdev->r600_blit.primitives.set_render_target = set_render_target;
+ rdev->r600_blit.primitives.cp_set_surface_sync = cp_set_surface_sync;
+ rdev->r600_blit.primitives.set_shaders = set_shaders;
+ rdev->r600_blit.primitives.set_vtx_resource = set_vtx_resource;
+ rdev->r600_blit.primitives.set_tex_resource = set_tex_resource;
+ rdev->r600_blit.primitives.set_scissors = set_scissors;
+ rdev->r600_blit.primitives.draw_auto = draw_auto;
+ rdev->r600_blit.primitives.set_default_state = set_default_state;
+
+ rdev->r600_blit.ring_size_common = 55; /* shaders + def state */
+ rdev->r600_blit.ring_size_common += 10; /* fence emit for VB IB */
+ rdev->r600_blit.ring_size_common += 5; /* done copy */
+ rdev->r600_blit.ring_size_common += 10; /* fence emit for done copy */
+
+ rdev->r600_blit.ring_size_per_loop = 74;
+
+ rdev->r600_blit.max_dim = 16384;
+
/* pin copy shader into vram if already initialized */
if (rdev->r600_blit.shader_obj)
goto done;
@@ -712,277 +716,3 @@
radeon_ttm_set_active_vram_size(rdev, rdev->mc.real_vram_size);
return 0;
}
-
-void evergreen_blit_fini(struct radeon_device *rdev)
-{
- int r;
-
- radeon_ttm_set_active_vram_size(rdev, rdev->mc.visible_vram_size);
- if (rdev->r600_blit.shader_obj == NULL)
- return;
- /* If we can't reserve the bo, unref should be enough to destroy
- * it when it becomes idle.
- */
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (!r) {
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
- }
- radeon_bo_unref(&rdev->r600_blit.shader_obj);
-}
-
-static int evergreen_vb_ib_get(struct radeon_device *rdev)
-{
- int r;
- r = radeon_ib_get(rdev, &rdev->r600_blit.vb_ib);
- if (r) {
- DRM_ERROR("failed to get IB for vertex buffer\n");
- return r;
- }
-
- rdev->r600_blit.vb_total = 64*1024;
- rdev->r600_blit.vb_used = 0;
- return 0;
-}
-
-static void evergreen_vb_ib_put(struct radeon_device *rdev)
-{
- radeon_fence_emit(rdev, rdev->r600_blit.vb_ib->fence);
- radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
-}
-
-int evergreen_blit_prepare_copy(struct radeon_device *rdev, int size_bytes)
-{
- int r;
- int ring_size, line_size;
- int max_size;
- /* loops of emits + fence emit possible */
- int dwords_per_loop = 74, num_loops;
-
- r = evergreen_vb_ib_get(rdev);
- if (r)
- return r;
-
- /* 8 bpp vs 32 bpp for xfer unit */
- if (size_bytes & 3)
- line_size = 8192;
- else
- line_size = 8192 * 4;
-
- max_size = 8192 * line_size;
-
- /* major loops cover the max size transfer */
- num_loops = ((size_bytes + max_size) / max_size);
- /* minor loops cover the extra non aligned bits */
- num_loops += ((size_bytes % line_size) ? 1 : 0);
- /* calculate number of loops correctly */
- ring_size = num_loops * dwords_per_loop;
- /* set default + shaders */
- ring_size += 55; /* shaders + def state */
- ring_size += 10; /* fence emit for VB IB */
- ring_size += 5; /* done copy */
- ring_size += 10; /* fence emit for done copy */
- r = radeon_ring_lock(rdev, ring_size);
- if (r)
- return r;
-
- set_default_state(rdev); /* 36 */
- set_shaders(rdev); /* 16 */
- return 0;
-}
-
-void evergreen_blit_done_copy(struct radeon_device *rdev, struct radeon_fence *fence)
-{
- int r;
-
- if (rdev->r600_blit.vb_ib)
- evergreen_vb_ib_put(rdev);
-
- if (fence)
- r = radeon_fence_emit(rdev, fence);
-
- radeon_ring_unlock_commit(rdev);
-}
-
-void evergreen_kms_blit_copy(struct radeon_device *rdev,
- u64 src_gpu_addr, u64 dst_gpu_addr,
- int size_bytes)
-{
- int max_bytes;
- u64 vb_gpu_addr;
- u32 *vb;
-
- DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr,
- size_bytes, rdev->r600_blit.vb_used);
- vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
- if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
- max_bytes = 8192;
-
- while (size_bytes) {
- int cur_size = size_bytes;
- int src_x = src_gpu_addr & 255;
- int dst_x = dst_gpu_addr & 255;
- int h = 1;
- src_gpu_addr = src_gpu_addr & ~255ULL;
- dst_gpu_addr = dst_gpu_addr & ~255ULL;
-
- if (!src_x && !dst_x) {
- h = (cur_size / max_bytes);
- if (h > 8192)
- h = 8192;
- if (h == 0)
- h = 1;
- else
- cur_size = max_bytes;
- } else {
- if (cur_size > max_bytes)
- cur_size = max_bytes;
- if (cur_size > (max_bytes - dst_x))
- cur_size = (max_bytes - dst_x);
- if (cur_size > (max_bytes - src_x))
- cur_size = (max_bytes - src_x);
- }
-
- if ((rdev->r600_blit.vb_used + 48) > rdev->r600_blit.vb_total) {
- WARN_ON(1);
- }
-
- vb[0] = i2f(dst_x);
- vb[1] = 0;
- vb[2] = i2f(src_x);
- vb[3] = 0;
-
- vb[4] = i2f(dst_x);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x);
- vb[7] = i2f(h);
-
- vb[8] = i2f(dst_x + cur_size);
- vb[9] = i2f(h);
- vb[10] = i2f(src_x + cur_size);
- vb[11] = i2f(h);
-
- /* src 10 */
- set_tex_resource(rdev, FMT_8,
- src_x + cur_size, h, src_x + cur_size,
- src_gpu_addr);
-
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_TC_ACTION_ENA, (src_x + cur_size * h), src_gpu_addr);
-
-
- /* dst 17 */
- set_render_target(rdev, COLOR_8,
- dst_x + cur_size, h,
- dst_gpu_addr);
-
- /* scissors 12 */
- set_scissors(rdev, dst_x, 0, dst_x + cur_size, h);
-
- /* 15 */
- vb_gpu_addr = rdev->r600_blit.vb_ib->gpu_addr + rdev->r600_blit.vb_used;
- set_vtx_resource(rdev, vb_gpu_addr);
-
- /* draw 10 */
- draw_auto(rdev);
-
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_CB_ACTION_ENA | PACKET3_CB0_DEST_BASE_ENA,
- cur_size * h, dst_gpu_addr);
-
- vb += 12;
- rdev->r600_blit.vb_used += 12 * 4;
-
- src_gpu_addr += cur_size * h;
- dst_gpu_addr += cur_size * h;
- size_bytes -= cur_size * h;
- }
- } else {
- max_bytes = 8192 * 4;
-
- while (size_bytes) {
- int cur_size = size_bytes;
- int src_x = (src_gpu_addr & 255);
- int dst_x = (dst_gpu_addr & 255);
- int h = 1;
- src_gpu_addr = src_gpu_addr & ~255ULL;
- dst_gpu_addr = dst_gpu_addr & ~255ULL;
-
- if (!src_x && !dst_x) {
- h = (cur_size / max_bytes);
- if (h > 8192)
- h = 8192;
- if (h == 0)
- h = 1;
- else
- cur_size = max_bytes;
- } else {
- if (cur_size > max_bytes)
- cur_size = max_bytes;
- if (cur_size > (max_bytes - dst_x))
- cur_size = (max_bytes - dst_x);
- if (cur_size > (max_bytes - src_x))
- cur_size = (max_bytes - src_x);
- }
-
- if ((rdev->r600_blit.vb_used + 48) > rdev->r600_blit.vb_total) {
- WARN_ON(1);
- }
-
- vb[0] = i2f(dst_x / 4);
- vb[1] = 0;
- vb[2] = i2f(src_x / 4);
- vb[3] = 0;
-
- vb[4] = i2f(dst_x / 4);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x / 4);
- vb[7] = i2f(h);
-
- vb[8] = i2f((dst_x + cur_size) / 4);
- vb[9] = i2f(h);
- vb[10] = i2f((src_x + cur_size) / 4);
- vb[11] = i2f(h);
-
- /* src 10 */
- set_tex_resource(rdev, FMT_8_8_8_8,
- (src_x + cur_size) / 4,
- h, (src_x + cur_size) / 4,
- src_gpu_addr);
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_TC_ACTION_ENA, (src_x + cur_size * h), src_gpu_addr);
-
- /* dst 17 */
- set_render_target(rdev, COLOR_8_8_8_8,
- (dst_x + cur_size) / 4, h,
- dst_gpu_addr);
-
- /* scissors 12 */
- set_scissors(rdev, (dst_x / 4), 0, (dst_x + cur_size / 4), h);
-
- /* Vertex buffer setup 15 */
- vb_gpu_addr = rdev->r600_blit.vb_ib->gpu_addr + rdev->r600_blit.vb_used;
- set_vtx_resource(rdev, vb_gpu_addr);
-
- /* draw 10 */
- draw_auto(rdev);
-
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_CB_ACTION_ENA | PACKET3_CB0_DEST_BASE_ENA,
- cur_size * h, dst_gpu_addr);
-
- /* 74 ring dwords per loop */
- vb += 12;
- rdev->r600_blit.vb_used += 12 * 4;
-
- src_gpu_addr += cur_size * h;
- dst_gpu_addr += cur_size * h;
- size_bytes -= cur_size * h;
- }
- }
-}
-
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index a134790..7fdfa8e 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -122,12 +122,6 @@
track->db_s_write_bo = NULL;
}
-static inline int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
-{
- /* XXX fill in */
- return 0;
-}
-
static int evergreen_cs_track_check(struct radeon_cs_parser *p)
{
struct evergreen_cs_track *track = p->track;
@@ -236,28 +230,6 @@
}
/**
- * evergreen_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc
- * @parser: parser structure holding parsing context.
- *
- * Check next packet is relocation packet3, do bo validation and compute
- * GPU offset using the provided start.
- **/
-static inline int evergreen_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
-{
- struct radeon_cs_packet p3reloc;
- int r;
-
- r = evergreen_cs_packet_parse(p, &p3reloc, p->idx);
- if (r) {
- return 0;
- }
- if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
- return 0;
- }
- return 1;
-}
-
-/**
* evergreen_cs_packet_next_vline() - parse userspace VLINE packet
* @parser: parser structure holding parsing context.
*
@@ -414,7 +386,7 @@
* if register is safe. If register is not flag as safe this function
* will test it against a list of register needind special handling.
*/
-static inline int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
+static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
{
struct evergreen_cs_track *track = (struct evergreen_cs_track *)p->track;
struct radeon_cs_reloc *reloc;
@@ -990,7 +962,7 @@
* This function will check that the resource has valid field and that
* the texture and mipmap bo object are big enough to cover this resource.
*/
-static inline int evergreen_check_texture_resource(struct radeon_cs_parser *p, u32 idx,
+static int evergreen_check_texture_resource(struct radeon_cs_parser *p, u32 idx,
struct radeon_bo *texture,
struct radeon_bo *mipmap)
{
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 7363d9d..b937c49 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -941,11 +941,15 @@
#define CB_COLOR0_SLICE 0x28c68
#define CB_COLOR0_VIEW 0x28c6c
#define CB_COLOR0_INFO 0x28c70
+# define CB_FORMAT(x) ((x) << 2)
# define CB_ARRAY_MODE(x) ((x) << 8)
# define ARRAY_LINEAR_GENERAL 0
# define ARRAY_LINEAR_ALIGNED 1
# define ARRAY_1D_TILED_THIN1 2
# define ARRAY_2D_TILED_THIN1 4
+# define CB_SOURCE_FORMAT(x) ((x) << 24)
+# define CB_SF_EXPORT_FULL 0
+# define CB_SF_EXPORT_NORM 1
#define CB_COLOR0_ATTRIB 0x28c74
#define CB_COLOR0_DIM 0x28c78
/* only CB0-7 blocks have these regs */
@@ -1107,15 +1111,53 @@
#define CB_COLOR7_CLEAR_WORD3 0x28e3c
#define SQ_TEX_RESOURCE_WORD0_0 0x30000
+# define TEX_DIM(x) ((x) << 0)
+# define SQ_TEX_DIM_1D 0
+# define SQ_TEX_DIM_2D 1
+# define SQ_TEX_DIM_3D 2
+# define SQ_TEX_DIM_CUBEMAP 3
+# define SQ_TEX_DIM_1D_ARRAY 4
+# define SQ_TEX_DIM_2D_ARRAY 5
+# define SQ_TEX_DIM_2D_MSAA 6
+# define SQ_TEX_DIM_2D_ARRAY_MSAA 7
#define SQ_TEX_RESOURCE_WORD1_0 0x30004
# define TEX_ARRAY_MODE(x) ((x) << 28)
#define SQ_TEX_RESOURCE_WORD2_0 0x30008
#define SQ_TEX_RESOURCE_WORD3_0 0x3000C
#define SQ_TEX_RESOURCE_WORD4_0 0x30010
+# define TEX_DST_SEL_X(x) ((x) << 16)
+# define TEX_DST_SEL_Y(x) ((x) << 19)
+# define TEX_DST_SEL_Z(x) ((x) << 22)
+# define TEX_DST_SEL_W(x) ((x) << 25)
+# define SQ_SEL_X 0
+# define SQ_SEL_Y 1
+# define SQ_SEL_Z 2
+# define SQ_SEL_W 3
+# define SQ_SEL_0 4
+# define SQ_SEL_1 5
#define SQ_TEX_RESOURCE_WORD5_0 0x30014
#define SQ_TEX_RESOURCE_WORD6_0 0x30018
#define SQ_TEX_RESOURCE_WORD7_0 0x3001c
+#define SQ_VTX_CONSTANT_WORD0_0 0x30000
+#define SQ_VTX_CONSTANT_WORD1_0 0x30004
+#define SQ_VTX_CONSTANT_WORD2_0 0x30008
+# define SQ_VTXC_BASE_ADDR_HI(x) ((x) << 0)
+# define SQ_VTXC_STRIDE(x) ((x) << 8)
+# define SQ_VTXC_ENDIAN_SWAP(x) ((x) << 30)
+# define SQ_ENDIAN_NONE 0
+# define SQ_ENDIAN_8IN16 1
+# define SQ_ENDIAN_8IN32 2
+#define SQ_VTX_CONSTANT_WORD3_0 0x3000C
+# define SQ_VTCX_SEL_X(x) ((x) << 3)
+# define SQ_VTCX_SEL_Y(x) ((x) << 6)
+# define SQ_VTCX_SEL_Z(x) ((x) << 9)
+# define SQ_VTCX_SEL_W(x) ((x) << 12)
+#define SQ_VTX_CONSTANT_WORD4_0 0x30010
+#define SQ_VTX_CONSTANT_WORD5_0 0x30014
+#define SQ_VTX_CONSTANT_WORD6_0 0x30018
+#define SQ_VTX_CONSTANT_WORD7_0 0x3001c
+
/* cayman 3D regs */
#define CAYMAN_VGT_OFFCHIP_LDS_BASE 0x89B0
#define CAYMAN_DB_EQAA 0x28804
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 8c79ca9..556b7bc 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -40,6 +40,7 @@
extern void evergreen_irq_suspend(struct radeon_device *rdev);
extern int evergreen_mc_init(struct radeon_device *rdev);
extern void evergreen_fix_pci_max_read_req_size(struct radeon_device *rdev);
+extern void evergreen_pcie_gen2_enable(struct radeon_device *rdev);
#define EVERGREEN_PFP_UCODE_SIZE 1120
#define EVERGREEN_PM4_UCODE_SIZE 1376
@@ -967,6 +968,9 @@
WREG32(VM_CONTEXT1_CNTL, 0);
cayman_pcie_gart_tlb_flush(rdev);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)rdev->gart.table_addr);
rdev->gart.ready = true;
return 0;
}
@@ -1341,6 +1345,9 @@
{
int r;
+ /* enable pcie gen2 link */
+ evergreen_pcie_gen2_enable(rdev);
+
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
r = ni_init_microcode(rdev);
if (r) {
@@ -1362,7 +1369,7 @@
r = evergreen_blit_init(rdev);
if (r) {
- evergreen_blit_fini(rdev);
+ r600_blit_fini(rdev);
rdev->asic->copy = NULL;
dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
}
@@ -1423,21 +1430,13 @@
int cayman_suspend(struct radeon_device *rdev)
{
- int r;
-
/* FIXME: we should wait for ring to be empty */
cayman_cp_enable(rdev, false);
rdev->cp.ready = false;
evergreen_irq_suspend(rdev);
radeon_wb_disable(rdev);
cayman_pcie_gart_disable(rdev);
-
- /* unpin shaders bo */
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (likely(r == 0)) {
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
- }
+ r600_blit_suspend(rdev);
return 0;
}
@@ -1550,7 +1549,7 @@
void cayman_fini(struct radeon_device *rdev)
{
- evergreen_blit_fini(rdev);
+ r600_blit_fini(rdev);
cayman_cp_fini(rdev);
r600_irq_fini(rdev);
radeon_wb_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 7fcdbbb..8f8b8fa 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -68,6 +68,108 @@
* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
*/
+int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ unsigned idx,
+ unsigned reg)
+{
+ int r;
+ u32 tile_flags = 0;
+ u32 tmp;
+ struct radeon_cs_reloc *reloc;
+ u32 value;
+
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ value = radeon_get_ib_value(p, idx);
+ tmp = value & 0x003fffff;
+ tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= RADEON_DST_TILE_MACRO;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+ if (reg == RADEON_SRC_PITCH_OFFSET) {
+ DRM_ERROR("Cannot src blit from microtiled surface\n");
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
+ tile_flags |= RADEON_DST_TILE_MICRO;
+ }
+
+ tmp |= tile_flags;
+ p->ib->ptr[idx] = (value & 0x3fc00000) | tmp;
+ return 0;
+}
+
+int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ int idx)
+{
+ unsigned c, i;
+ struct radeon_cs_reloc *reloc;
+ struct r100_cs_track *track;
+ int r = 0;
+ volatile uint32_t *ib;
+ u32 idx_value;
+
+ ib = p->ib->ptr;
+ track = (struct r100_cs_track *)p->track;
+ c = radeon_get_ib_value(p, idx++) & 0x1F;
+ if (c > 16) {
+ DRM_ERROR("Only 16 vertex buffers are allowed %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
+ track->num_arrays = c;
+ for (i = 0; i < (c - 1); i+=2, idx+=3) {
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for packet3 %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ idx_value = radeon_get_ib_value(p, idx);
+ ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+
+ track->arrays[i + 0].esize = idx_value >> 8;
+ track->arrays[i + 0].robj = reloc->robj;
+ track->arrays[i + 0].esize &= 0x7F;
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for packet3 %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ ib[idx+2] = radeon_get_ib_value(p, idx + 2) + ((u32)reloc->lobj.gpu_offset);
+ track->arrays[i + 1].robj = reloc->robj;
+ track->arrays[i + 1].esize = idx_value >> 24;
+ track->arrays[i + 1].esize &= 0x7F;
+ }
+ if (c & 1) {
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for packet3 %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ idx_value = radeon_get_ib_value(p, idx);
+ ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+ track->arrays[i + 0].robj = reloc->robj;
+ track->arrays[i + 0].esize = idx_value >> 8;
+ track->arrays[i + 0].esize &= 0x7F;
+ }
+ return r;
+}
+
void r100_pre_page_flip(struct radeon_device *rdev, int crtc)
{
/* enable the pflip int */
@@ -513,6 +615,9 @@
tmp = RREG32(RADEON_AIC_CNTL) | RADEON_PCIGART_TRANSLATE_EN;
WREG32(RADEON_AIC_CNTL, tmp);
r100_pci_gart_tlb_flush(rdev);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)rdev->gart.table_addr);
rdev->gart.ready = true;
return 0;
}
@@ -588,7 +693,7 @@
WREG32(R_000044_GEN_INT_STATUS, tmp);
}
-static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
+static uint32_t r100_irq_ack(struct radeon_device *rdev)
{
uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
uint32_t irq_mask = RADEON_SW_INT_TEST |
@@ -3147,7 +3252,7 @@
}
}
-static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t)
+static void r100_cs_track_texture_print(struct r100_cs_track_texture *t)
{
DRM_ERROR("pitch %d\n", t->pitch);
DRM_ERROR("use_pitch %d\n", t->use_pitch);
@@ -3965,3 +4070,43 @@
}
return 0;
}
+
+uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+ if (reg < rdev->rmmio_size)
+ return readl(((void __iomem *)rdev->rmmio) + reg);
+ else {
+ writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+ return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+ }
+}
+
+void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+ if (reg < rdev->rmmio_size)
+ writel(v, ((void __iomem *)rdev->rmmio) + reg);
+ else {
+ writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+ writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+ }
+}
+
+u32 r100_io_rreg(struct radeon_device *rdev, u32 reg)
+{
+ if (reg < rdev->rio_mem_size)
+ return ioread32(rdev->rio_mem + reg);
+ else {
+ iowrite32(reg, rdev->rio_mem + RADEON_MM_INDEX);
+ return ioread32(rdev->rio_mem + RADEON_MM_DATA);
+ }
+}
+
+void r100_io_wreg(struct radeon_device *rdev, u32 reg, u32 v)
+{
+ if (reg < rdev->rio_mem_size)
+ iowrite32(v, rdev->rio_mem + reg);
+ else {
+ iowrite32(reg, rdev->rio_mem + RADEON_MM_INDEX);
+ iowrite32(v, rdev->rio_mem + RADEON_MM_DATA);
+ }
+}
diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h
index 686f9dc..6a603b3 100644
--- a/drivers/gpu/drm/radeon/r100_track.h
+++ b/drivers/gpu/drm/radeon/r100_track.h
@@ -92,106 +92,10 @@
struct radeon_cs_packet *pkt,
unsigned idx, unsigned reg);
-
-
-static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- unsigned idx,
- unsigned reg)
-{
- int r;
- u32 tile_flags = 0;
- u32 tmp;
- struct radeon_cs_reloc *reloc;
- u32 value;
-
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
- idx, reg);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- value = radeon_get_ib_value(p, idx);
- tmp = value & 0x003fffff;
- tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
-
- if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
- tile_flags |= RADEON_DST_TILE_MACRO;
- if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
- if (reg == RADEON_SRC_PITCH_OFFSET) {
- DRM_ERROR("Cannot src blit from microtiled surface\n");
- r100_cs_dump_packet(p, pkt);
- return -EINVAL;
- }
- tile_flags |= RADEON_DST_TILE_MICRO;
- }
-
- tmp |= tile_flags;
- p->ib->ptr[idx] = (value & 0x3fc00000) | tmp;
- return 0;
-}
-
-static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- int idx)
-{
- unsigned c, i;
- struct radeon_cs_reloc *reloc;
- struct r100_cs_track *track;
- int r = 0;
- volatile uint32_t *ib;
- u32 idx_value;
-
- ib = p->ib->ptr;
- track = (struct r100_cs_track *)p->track;
- c = radeon_get_ib_value(p, idx++) & 0x1F;
- if (c > 16) {
- DRM_ERROR("Only 16 vertex buffers are allowed %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return -EINVAL;
- }
- track->num_arrays = c;
- for (i = 0; i < (c - 1); i+=2, idx+=3) {
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- idx_value = radeon_get_ib_value(p, idx);
- ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
-
- track->arrays[i + 0].esize = idx_value >> 8;
- track->arrays[i + 0].robj = reloc->robj;
- track->arrays[i + 0].esize &= 0x7F;
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- ib[idx+2] = radeon_get_ib_value(p, idx + 2) + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 1].robj = reloc->robj;
- track->arrays[i + 1].esize = idx_value >> 24;
- track->arrays[i + 1].esize &= 0x7F;
- }
- if (c & 1) {
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- idx_value = radeon_get_ib_value(p, idx);
- ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 0].robj = reloc->robj;
- track->arrays[i + 0].esize = idx_value >> 8;
- track->arrays[i + 0].esize &= 0x7F;
- }
- return r;
-}
+int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ unsigned idx,
+ unsigned reg);
+int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ int idx);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 55a7f19..33f2b68 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -144,8 +144,9 @@
tmp |= RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD;
WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
rv370_pcie_gart_tlb_flush(rdev);
- DRM_INFO("PCIE GART of %uM enabled (table at 0x%08X).\n",
- (unsigned)(rdev->mc.gtt_size >> 20), table_addr);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)table_addr);
rdev->gart.ready = true;
return 0;
}
diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index c5c2742..1fe98b4 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -791,7 +791,7 @@
/**
* Emit the sequence to pacify R300.
*/
-static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
+static void r300_pacify(drm_radeon_private_t *dev_priv)
{
uint32_t cache_z, cache_3d, cache_2d;
RING_LOCALS;
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 720dd99..12470b0 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -993,6 +993,9 @@
WREG32(VM_CONTEXT0_CNTL + (i * 4), 0);
r600_pcie_gart_tlb_flush(rdev);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)rdev->gart.table_addr);
rdev->gart.ready = true;
return 0;
}
@@ -2362,19 +2365,33 @@
mutex_lock(&rdev->r600_blit.mutex);
rdev->r600_blit.vb_ib = NULL;
- r = r600_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
+ r = r600_blit_prepare_copy(rdev, num_gpu_pages);
if (r) {
if (rdev->r600_blit.vb_ib)
radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
mutex_unlock(&rdev->r600_blit.mutex);
return r;
}
- r600_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
+ r600_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages);
r600_blit_done_copy(rdev, fence);
mutex_unlock(&rdev->r600_blit.mutex);
return 0;
}
+void r600_blit_suspend(struct radeon_device *rdev)
+{
+ int r;
+
+ /* unpin shaders bo */
+ if (rdev->r600_blit.shader_obj) {
+ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+ if (!r) {
+ radeon_bo_unpin(rdev->r600_blit.shader_obj);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ }
+ }
+}
+
int r600_set_surface_reg(struct radeon_device *rdev, int reg,
uint32_t tiling_flags, uint32_t pitch,
uint32_t offset, uint32_t obj_size)
@@ -2494,8 +2511,6 @@
int r600_suspend(struct radeon_device *rdev)
{
- int r;
-
r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
r600_cp_stop(rdev);
@@ -2503,14 +2518,8 @@
r600_irq_suspend(rdev);
radeon_wb_disable(rdev);
r600_pcie_gart_disable(rdev);
- /* unpin shaders bo */
- if (rdev->r600_blit.shader_obj) {
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (!r) {
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
- }
- }
+ r600_blit_suspend(rdev);
+
return 0;
}
@@ -3137,7 +3146,7 @@
return 0;
}
-static inline void r600_irq_ack(struct radeon_device *rdev)
+static void r600_irq_ack(struct radeon_device *rdev)
{
u32 tmp;
@@ -3238,7 +3247,7 @@
r600_disable_interrupt_state(rdev);
}
-static inline u32 r600_get_ih_wptr(struct radeon_device *rdev)
+static u32 r600_get_ih_wptr(struct radeon_device *rdev)
{
u32 wptr, tmp;
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index 7f10434..3c031a4 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -41,7 +41,7 @@
#define COLOR_5_6_5 0x8
#define COLOR_8_8_8_8 0x1a
-static inline void
+static void
set_render_target(drm_radeon_private_t *dev_priv, int format, int w, int h, u64 gpu_addr)
{
u32 cb_color_info;
@@ -99,7 +99,7 @@
ADVANCE_RING();
}
-static inline void
+static void
cp_set_surface_sync(drm_radeon_private_t *dev_priv,
u32 sync_type, u32 size, u64 mc_addr)
{
@@ -121,7 +121,7 @@
ADVANCE_RING();
}
-static inline void
+static void
set_shaders(struct drm_device *dev)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
@@ -184,7 +184,7 @@
R600_SH_ACTION_ENA, 512, gpu_addr);
}
-static inline void
+static void
set_vtx_resource(drm_radeon_private_t *dev_priv, u64 gpu_addr)
{
uint32_t sq_vtx_constant_word2;
@@ -220,7 +220,7 @@
R600_VC_ACTION_ENA, 48, gpu_addr);
}
-static inline void
+static void
set_tex_resource(drm_radeon_private_t *dev_priv,
int format, int w, int h, int pitch, u64 gpu_addr)
{
@@ -258,7 +258,7 @@
}
-static inline void
+static void
set_scissors(drm_radeon_private_t *dev_priv, int x1, int y1, int x2, int y2)
{
RING_LOCALS;
@@ -282,7 +282,7 @@
ADVANCE_RING();
}
-static inline void
+static void
draw_auto(drm_radeon_private_t *dev_priv)
{
RING_LOCALS;
@@ -311,7 +311,7 @@
COMMIT_RING();
}
-static inline void
+static void
set_default_state(drm_radeon_private_t *dev_priv)
{
int i;
@@ -489,7 +489,7 @@
ADVANCE_RING();
}
-static inline uint32_t i2f(uint32_t input)
+static uint32_t i2f(uint32_t input)
{
u32 result, i, exponent, fraction;
@@ -515,7 +515,7 @@
}
-static inline int r600_nomm_get_vb(struct drm_device *dev)
+static int r600_nomm_get_vb(struct drm_device *dev)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
dev_priv->blit_vb = radeon_freelist_get(dev);
@@ -526,7 +526,7 @@
return 0;
}
-static inline void r600_nomm_put_vb(struct drm_device *dev)
+static void r600_nomm_put_vb(struct drm_device *dev)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
@@ -534,7 +534,7 @@
radeon_cp_discard_buffer(dev, dev_priv->blit_vb->file_priv->master, dev_priv->blit_vb);
}
-static inline void *r600_nomm_get_vb_ptr(struct drm_device *dev)
+static void *r600_nomm_get_vb_ptr(struct drm_device *dev)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
return (((char *)dev->agp_buffer_map->handle +
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 9aa74c3f..c4cf130 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -42,6 +42,9 @@
#define COLOR_5_6_5 0x8
#define COLOR_8_8_8_8 0x1a
+#define RECT_UNIT_H 32
+#define RECT_UNIT_W (RADEON_GPU_PAGE_SIZE / 4 / RECT_UNIT_H)
+
/* emits 21 on rv770+, 23 on r600 */
static void
set_render_target(struct radeon_device *rdev, int format,
@@ -54,7 +57,9 @@
if (h < 8)
h = 8;
- cb_color_info = ((format << 2) | (1 << 27) | (1 << 8));
+ cb_color_info = CB_FORMAT(format) |
+ CB_SOURCE_FORMAT(CB_SF_EXPORT_NORM) |
+ CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
pitch = (w / 8) - 1;
slice = ((w * h) / 64) - 1;
@@ -164,9 +169,10 @@
{
u32 sq_vtx_constant_word2;
- sq_vtx_constant_word2 = ((upper_32_bits(gpu_addr) & 0xff) | (16 << 8));
+ sq_vtx_constant_word2 = SQ_VTXC_BASE_ADDR_HI(upper_32_bits(gpu_addr) & 0xff) |
+ SQ_VTXC_STRIDE(16);
#ifdef __BIG_ENDIAN
- sq_vtx_constant_word2 |= (2 << 30);
+ sq_vtx_constant_word2 |= SQ_VTXC_ENDIAN_SWAP(SQ_ENDIAN_8IN32);
#endif
radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 7));
@@ -202,18 +208,19 @@
if (h < 1)
h = 1;
- sq_tex_resource_word0 = (1 << 0) | (1 << 3);
- sq_tex_resource_word0 |= ((((pitch >> 3) - 1) << 8) |
- ((w - 1) << 19));
+ sq_tex_resource_word0 = S_038000_DIM(V_038000_SQ_TEX_DIM_2D) |
+ S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+ sq_tex_resource_word0 |= S_038000_PITCH((pitch >> 3) - 1) |
+ S_038000_TEX_WIDTH(w - 1);
- sq_tex_resource_word1 = (format << 26);
- sq_tex_resource_word1 |= ((h - 1) << 0);
+ sq_tex_resource_word1 = S_038004_DATA_FORMAT(format);
+ sq_tex_resource_word1 |= S_038004_TEX_HEIGHT(h - 1);
- sq_tex_resource_word4 = ((1 << 14) |
- (0 << 16) |
- (1 << 19) |
- (2 << 22) |
- (3 << 25));
+ sq_tex_resource_word4 = S_038010_REQUEST_SIZE(1) |
+ S_038010_DST_SEL_X(SQ_SEL_X) |
+ S_038010_DST_SEL_Y(SQ_SEL_Y) |
+ S_038010_DST_SEL_Z(SQ_SEL_Z) |
+ S_038010_DST_SEL_W(SQ_SEL_W);
radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 7));
radeon_ring_write(rdev, 0);
@@ -450,7 +457,7 @@
radeon_ring_write(rdev, sq_stack_resource_mgmt_2);
}
-static inline uint32_t i2f(uint32_t input)
+static uint32_t i2f(uint32_t input)
{
u32 result, i, exponent, fraction;
@@ -483,6 +490,27 @@
u32 packet2s[16];
int num_packet2s = 0;
+ rdev->r600_blit.primitives.set_render_target = set_render_target;
+ rdev->r600_blit.primitives.cp_set_surface_sync = cp_set_surface_sync;
+ rdev->r600_blit.primitives.set_shaders = set_shaders;
+ rdev->r600_blit.primitives.set_vtx_resource = set_vtx_resource;
+ rdev->r600_blit.primitives.set_tex_resource = set_tex_resource;
+ rdev->r600_blit.primitives.set_scissors = set_scissors;
+ rdev->r600_blit.primitives.draw_auto = draw_auto;
+ rdev->r600_blit.primitives.set_default_state = set_default_state;
+
+ rdev->r600_blit.ring_size_common = 40; /* shaders + def state */
+ rdev->r600_blit.ring_size_common += 10; /* fence emit for VB IB */
+ rdev->r600_blit.ring_size_common += 5; /* done copy */
+ rdev->r600_blit.ring_size_common += 10; /* fence emit for done copy */
+
+ rdev->r600_blit.ring_size_per_loop = 76;
+ /* set_render_target emits 2 extra dwords on rv6xx */
+ if (rdev->family > CHIP_R600 && rdev->family < CHIP_RV770)
+ rdev->r600_blit.ring_size_per_loop += 2;
+
+ rdev->r600_blit.max_dim = 8192;
+
/* pin copy shader into vram if already initialized */
if (rdev->r600_blit.shader_obj)
goto done;
@@ -600,47 +628,80 @@
radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
}
-int r600_blit_prepare_copy(struct radeon_device *rdev, int size_bytes)
+static unsigned r600_blit_create_rect(unsigned num_gpu_pages,
+ int *width, int *height, int max_dim)
+{
+ unsigned max_pages;
+ unsigned pages = num_gpu_pages;
+ int w, h;
+
+ if (num_gpu_pages == 0) {
+ /* not supposed to be called with no pages, but just in case */
+ h = 0;
+ w = 0;
+ pages = 0;
+ WARN_ON(1);
+ } else {
+ int rect_order = 2;
+ h = RECT_UNIT_H;
+ while (num_gpu_pages / rect_order) {
+ h *= 2;
+ rect_order *= 4;
+ if (h >= max_dim) {
+ h = max_dim;
+ break;
+ }
+ }
+ max_pages = (max_dim * h) / (RECT_UNIT_W * RECT_UNIT_H);
+ if (pages > max_pages)
+ pages = max_pages;
+ w = (pages * RECT_UNIT_W * RECT_UNIT_H) / h;
+ w = (w / RECT_UNIT_W) * RECT_UNIT_W;
+ pages = (w * h) / (RECT_UNIT_W * RECT_UNIT_H);
+ BUG_ON(pages == 0);
+ }
+
+
+ DRM_DEBUG("blit_rectangle: h=%d, w=%d, pages=%d\n", h, w, pages);
+
+ /* return width and height only of the caller wants it */
+ if (height)
+ *height = h;
+ if (width)
+ *width = w;
+
+ return pages;
+}
+
+
+int r600_blit_prepare_copy(struct radeon_device *rdev, unsigned num_gpu_pages)
{
int r;
- int ring_size, line_size;
- int max_size;
- /* loops of emits 64 + fence emit possible */
- int dwords_per_loop = 76, num_loops;
+ int ring_size;
+ int num_loops = 0;
+ int dwords_per_loop = rdev->r600_blit.ring_size_per_loop;
r = r600_vb_ib_get(rdev);
if (r)
return r;
- /* set_render_target emits 2 extra dwords on rv6xx */
- if (rdev->family > CHIP_R600 && rdev->family < CHIP_RV770)
- dwords_per_loop += 2;
+ /* num loops */
+ while (num_gpu_pages) {
+ num_gpu_pages -=
+ r600_blit_create_rect(num_gpu_pages, NULL, NULL,
+ rdev->r600_blit.max_dim);
+ num_loops++;
+ }
- /* 8 bpp vs 32 bpp for xfer unit */
- if (size_bytes & 3)
- line_size = 8192;
- else
- line_size = 8192*4;
-
- max_size = 8192 * line_size;
-
- /* major loops cover the max size transfer */
- num_loops = ((size_bytes + max_size) / max_size);
- /* minor loops cover the extra non aligned bits */
- num_loops += ((size_bytes % line_size) ? 1 : 0);
/* calculate number of loops correctly */
ring_size = num_loops * dwords_per_loop;
- /* set default + shaders */
- ring_size += 40; /* shaders + def state */
- ring_size += 10; /* fence emit for VB IB */
- ring_size += 5; /* done copy */
- ring_size += 10; /* fence emit for done copy */
+ ring_size += rdev->r600_blit.ring_size_common;
r = radeon_ring_lock(rdev, ring_size);
if (r)
return r;
- set_default_state(rdev); /* 14 */
- set_shaders(rdev); /* 26 */
+ rdev->r600_blit.primitives.set_default_state(rdev);
+ rdev->r600_blit.primitives.set_shaders(rdev);
return 0;
}
@@ -659,182 +720,64 @@
void r600_kms_blit_copy(struct radeon_device *rdev,
u64 src_gpu_addr, u64 dst_gpu_addr,
- int size_bytes)
+ unsigned num_gpu_pages)
{
- int max_bytes;
u64 vb_gpu_addr;
u32 *vb;
- DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr,
- size_bytes, rdev->r600_blit.vb_used);
+ DRM_DEBUG("emitting copy %16llx %16llx %d %d\n",
+ src_gpu_addr, dst_gpu_addr,
+ num_gpu_pages, rdev->r600_blit.vb_used);
vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
- if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
- max_bytes = 8192;
- while (size_bytes) {
- int cur_size = size_bytes;
- int src_x = src_gpu_addr & 255;
- int dst_x = dst_gpu_addr & 255;
- int h = 1;
- src_gpu_addr = src_gpu_addr & ~255ULL;
- dst_gpu_addr = dst_gpu_addr & ~255ULL;
+ while (num_gpu_pages) {
+ int w, h;
+ unsigned size_in_bytes;
+ unsigned pages_per_loop =
+ r600_blit_create_rect(num_gpu_pages, &w, &h,
+ rdev->r600_blit.max_dim);
- if (!src_x && !dst_x) {
- h = (cur_size / max_bytes);
- if (h > 8192)
- h = 8192;
- if (h == 0)
- h = 1;
- else
- cur_size = max_bytes;
- } else {
- if (cur_size > max_bytes)
- cur_size = max_bytes;
- if (cur_size > (max_bytes - dst_x))
- cur_size = (max_bytes - dst_x);
- if (cur_size > (max_bytes - src_x))
- cur_size = (max_bytes - src_x);
- }
+ size_in_bytes = pages_per_loop * RADEON_GPU_PAGE_SIZE;
+ DRM_DEBUG("rectangle w=%d h=%d\n", w, h);
- if ((rdev->r600_blit.vb_used + 48) > rdev->r600_blit.vb_total) {
- WARN_ON(1);
- }
-
- vb[0] = i2f(dst_x);
- vb[1] = 0;
- vb[2] = i2f(src_x);
- vb[3] = 0;
-
- vb[4] = i2f(dst_x);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x);
- vb[7] = i2f(h);
-
- vb[8] = i2f(dst_x + cur_size);
- vb[9] = i2f(h);
- vb[10] = i2f(src_x + cur_size);
- vb[11] = i2f(h);
-
- /* src 9 */
- set_tex_resource(rdev, FMT_8,
- src_x + cur_size, h, src_x + cur_size,
- src_gpu_addr);
-
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_TC_ACTION_ENA, (src_x + cur_size * h), src_gpu_addr);
-
- /* dst 23 */
- set_render_target(rdev, COLOR_8,
- dst_x + cur_size, h,
- dst_gpu_addr);
-
- /* scissors 12 */
- set_scissors(rdev, dst_x, 0, dst_x + cur_size, h);
-
- /* 14 */
- vb_gpu_addr = rdev->r600_blit.vb_ib->gpu_addr + rdev->r600_blit.vb_used;
- set_vtx_resource(rdev, vb_gpu_addr);
-
- /* draw 10 */
- draw_auto(rdev);
-
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_CB_ACTION_ENA | PACKET3_CB0_DEST_BASE_ENA,
- cur_size * h, dst_gpu_addr);
-
- vb += 12;
- rdev->r600_blit.vb_used += 12 * 4;
-
- src_gpu_addr += cur_size * h;
- dst_gpu_addr += cur_size * h;
- size_bytes -= cur_size * h;
+ if ((rdev->r600_blit.vb_used + 48) > rdev->r600_blit.vb_total) {
+ WARN_ON(1);
}
- } else {
- max_bytes = 8192 * 4;
- while (size_bytes) {
- int cur_size = size_bytes;
- int src_x = (src_gpu_addr & 255);
- int dst_x = (dst_gpu_addr & 255);
- int h = 1;
- src_gpu_addr = src_gpu_addr & ~255ULL;
- dst_gpu_addr = dst_gpu_addr & ~255ULL;
+ vb[0] = 0;
+ vb[1] = 0;
+ vb[2] = 0;
+ vb[3] = 0;
- if (!src_x && !dst_x) {
- h = (cur_size / max_bytes);
- if (h > 8192)
- h = 8192;
- if (h == 0)
- h = 1;
- else
- cur_size = max_bytes;
- } else {
- if (cur_size > max_bytes)
- cur_size = max_bytes;
- if (cur_size > (max_bytes - dst_x))
- cur_size = (max_bytes - dst_x);
- if (cur_size > (max_bytes - src_x))
- cur_size = (max_bytes - src_x);
- }
+ vb[4] = 0;
+ vb[5] = i2f(h);
+ vb[6] = 0;
+ vb[7] = i2f(h);
- if ((rdev->r600_blit.vb_used + 48) > rdev->r600_blit.vb_total) {
- WARN_ON(1);
- }
+ vb[8] = i2f(w);
+ vb[9] = i2f(h);
+ vb[10] = i2f(w);
+ vb[11] = i2f(h);
- vb[0] = i2f(dst_x / 4);
- vb[1] = 0;
- vb[2] = i2f(src_x / 4);
- vb[3] = 0;
+ rdev->r600_blit.primitives.set_tex_resource(rdev, FMT_8_8_8_8,
+ w, h, w, src_gpu_addr);
+ rdev->r600_blit.primitives.cp_set_surface_sync(rdev,
+ PACKET3_TC_ACTION_ENA,
+ size_in_bytes, src_gpu_addr);
+ rdev->r600_blit.primitives.set_render_target(rdev, COLOR_8_8_8_8,
+ w, h, dst_gpu_addr);
+ rdev->r600_blit.primitives.set_scissors(rdev, 0, 0, w, h);
+ vb_gpu_addr = rdev->r600_blit.vb_ib->gpu_addr + rdev->r600_blit.vb_used;
+ rdev->r600_blit.primitives.set_vtx_resource(rdev, vb_gpu_addr);
+ rdev->r600_blit.primitives.draw_auto(rdev);
+ rdev->r600_blit.primitives.cp_set_surface_sync(rdev,
+ PACKET3_CB_ACTION_ENA | PACKET3_CB0_DEST_BASE_ENA,
+ size_in_bytes, dst_gpu_addr);
- vb[4] = i2f(dst_x / 4);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x / 4);
- vb[7] = i2f(h);
-
- vb[8] = i2f((dst_x + cur_size) / 4);
- vb[9] = i2f(h);
- vb[10] = i2f((src_x + cur_size) / 4);
- vb[11] = i2f(h);
-
- /* src 9 */
- set_tex_resource(rdev, FMT_8_8_8_8,
- (src_x + cur_size) / 4,
- h, (src_x + cur_size) / 4,
- src_gpu_addr);
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_TC_ACTION_ENA, (src_x + cur_size * h), src_gpu_addr);
-
- /* dst 23 */
- set_render_target(rdev, COLOR_8_8_8_8,
- (dst_x + cur_size) / 4, h,
- dst_gpu_addr);
-
- /* scissors 12 */
- set_scissors(rdev, (dst_x / 4), 0, (dst_x + cur_size / 4), h);
-
- /* Vertex buffer setup 14 */
- vb_gpu_addr = rdev->r600_blit.vb_ib->gpu_addr + rdev->r600_blit.vb_used;
- set_vtx_resource(rdev, vb_gpu_addr);
-
- /* draw 10 */
- draw_auto(rdev);
-
- /* 5 */
- cp_set_surface_sync(rdev,
- PACKET3_CB_ACTION_ENA | PACKET3_CB0_DEST_BASE_ENA,
- cur_size * h, dst_gpu_addr);
-
- /* 78 ring dwords per loop */
- vb += 12;
- rdev->r600_blit.vb_used += 12 * 4;
-
- src_gpu_addr += cur_size * h;
- dst_gpu_addr += cur_size * h;
- size_bytes -= cur_size * h;
- }
+ vb += 12;
+ rdev->r600_blit.vb_used += 4*12;
+ src_gpu_addr += size_in_bytes;
+ dst_gpu_addr += size_in_bytes;
+ num_gpu_pages -= pages_per_loop;
}
}
-
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index cf83aa0..0a2e023 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -162,7 +162,7 @@
[V_038004_FMT_32_AS_32_32_32_32] = { 1, 1, 4, 0, CHIP_CEDAR},
};
-static inline bool fmt_is_valid_color(u32 format)
+static bool fmt_is_valid_color(u32 format)
{
if (format >= ARRAY_SIZE(color_formats_table))
return false;
@@ -173,7 +173,7 @@
return false;
}
-static inline bool fmt_is_valid_texture(u32 format, enum radeon_family family)
+static bool fmt_is_valid_texture(u32 format, enum radeon_family family)
{
if (format >= ARRAY_SIZE(color_formats_table))
return false;
@@ -187,7 +187,7 @@
return false;
}
-static inline int fmt_get_blocksize(u32 format)
+static int fmt_get_blocksize(u32 format)
{
if (format >= ARRAY_SIZE(color_formats_table))
return 0;
@@ -195,7 +195,7 @@
return color_formats_table[format].blocksize;
}
-static inline int fmt_get_nblocksx(u32 format, u32 w)
+static int fmt_get_nblocksx(u32 format, u32 w)
{
unsigned bw;
@@ -209,7 +209,7 @@
return (w + bw - 1) / bw;
}
-static inline int fmt_get_nblocksy(u32 format, u32 h)
+static int fmt_get_nblocksy(u32 format, u32 h)
{
unsigned bh;
@@ -223,25 +223,6 @@
return (h + bh - 1) / bh;
}
-static inline int r600_bpe_from_format(u32 *bpe, u32 format)
-{
- unsigned res;
-
- if (format >= ARRAY_SIZE(color_formats_table))
- goto fail;
-
- res = color_formats_table[format].blocksize;
- if (res == 0)
- goto fail;
-
- *bpe = res;
- return 0;
-
-fail:
- *bpe = 16;
- return -EINVAL;
-}
-
struct array_mode_checker {
int array_mode;
u32 group_size;
@@ -252,7 +233,7 @@
};
/* returns alignment in pixels for pitch/height/depth and bytes for base */
-static inline int r600_get_array_mode_alignment(struct array_mode_checker *values,
+static int r600_get_array_mode_alignment(struct array_mode_checker *values,
u32 *pitch_align,
u32 *height_align,
u32 *depth_align,
@@ -331,7 +312,7 @@
track->db_depth_control = 0xFFFFFFFF;
}
-static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
+static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
{
struct r600_cs_track *track = p->track;
u32 slice_tile_max, size, tmp;
@@ -737,7 +718,7 @@
* Check next packet is relocation packet3, do bo validation and compute
* GPU offset using the provided start.
**/
-static inline int r600_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
+static int r600_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
{
struct radeon_cs_packet p3reloc;
int r;
@@ -911,7 +892,7 @@
* if register is safe. If register is not flag as safe this function
* will test it against a list of register needind special handling.
*/
-static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
+static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
{
struct r600_cs_track *track = (struct r600_cs_track *)p->track;
struct radeon_cs_reloc *reloc;
@@ -1215,7 +1196,7 @@
return 0;
}
-static inline unsigned mip_minify(unsigned size, unsigned level)
+static unsigned mip_minify(unsigned size, unsigned level)
{
unsigned val;
@@ -1285,7 +1266,7 @@
* This function will check that the resource has valid field and that
* the texture and mipmap bo object are big enough to cover this resource.
*/
-static inline int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx,
+static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx,
struct radeon_bo *texture,
struct radeon_bo *mipmap,
u64 base_offset,
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 0245ae6..bfe1b5d 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -79,6 +79,11 @@
#define CB_COLOR0_SIZE 0x28060
#define CB_COLOR0_VIEW 0x28080
#define CB_COLOR0_INFO 0x280a0
+# define CB_FORMAT(x) ((x) << 2)
+# define CB_ARRAY_MODE(x) ((x) << 8)
+# define CB_SOURCE_FORMAT(x) ((x) << 27)
+# define CB_SF_EXPORT_FULL 0
+# define CB_SF_EXPORT_NORM 1
#define CB_COLOR0_TILE 0x280c0
#define CB_COLOR0_FRAG 0x280e0
#define CB_COLOR0_MASK 0x28100
@@ -417,6 +422,17 @@
#define SQ_PGM_START_VS 0x28858
#define SQ_PGM_RESOURCES_VS 0x28868
#define SQ_PGM_CF_OFFSET_VS 0x288d0
+
+#define SQ_VTX_CONSTANT_WORD0_0 0x30000
+#define SQ_VTX_CONSTANT_WORD1_0 0x30004
+#define SQ_VTX_CONSTANT_WORD2_0 0x30008
+# define SQ_VTXC_BASE_ADDR_HI(x) ((x) << 0)
+# define SQ_VTXC_STRIDE(x) ((x) << 8)
+# define SQ_VTXC_ENDIAN_SWAP(x) ((x) << 30)
+# define SQ_ENDIAN_NONE 0
+# define SQ_ENDIAN_8IN16 1
+# define SQ_ENDIAN_8IN32 2
+#define SQ_VTX_CONSTANT_WORD3_0 0x3000c
#define SQ_VTX_CONSTANT_WORD6_0 0x38018
#define S__SQ_VTX_CONSTANT_TYPE(x) (((x) & 3) << 30)
#define G__SQ_VTX_CONSTANT_TYPE(x) (((x) >> 30) & 3)
@@ -1352,6 +1368,12 @@
#define S_038010_DST_SEL_W(x) (((x) & 0x7) << 25)
#define G_038010_DST_SEL_W(x) (((x) >> 25) & 0x7)
#define C_038010_DST_SEL_W 0xF1FFFFFF
+# define SQ_SEL_X 0
+# define SQ_SEL_Y 1
+# define SQ_SEL_Z 2
+# define SQ_SEL_W 3
+# define SQ_SEL_0 4
+# define SQ_SEL_1 5
#define S_038010_BASE_LEVEL(x) (((x) & 0xF) << 28)
#define G_038010_BASE_LEVEL(x) (((x) >> 28) & 0xF)
#define C_038010_BASE_LEVEL 0x0FFFFFFF
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index c1e056b..e3170c7 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -102,7 +102,7 @@
#define RADEON_FENCE_JIFFIES_TIMEOUT (HZ / 2)
/* RADEON_IB_POOL_SIZE must be a power of 2 */
#define RADEON_IB_POOL_SIZE 16
-#define RADEON_DEBUGFS_MAX_NUM_FILES 32
+#define RADEON_DEBUGFS_MAX_COMPONENTS 32
#define RADEONFB_CONN_LIMIT 4
#define RADEON_BIOS_NUM_SCRATCH 8
@@ -523,9 +523,30 @@
bool enabled;
};
+struct r600_blit_cp_primitives {
+ void (*set_render_target)(struct radeon_device *rdev, int format,
+ int w, int h, u64 gpu_addr);
+ void (*cp_set_surface_sync)(struct radeon_device *rdev,
+ u32 sync_type, u32 size,
+ u64 mc_addr);
+ void (*set_shaders)(struct radeon_device *rdev);
+ void (*set_vtx_resource)(struct radeon_device *rdev, u64 gpu_addr);
+ void (*set_tex_resource)(struct radeon_device *rdev,
+ int format, int w, int h, int pitch,
+ u64 gpu_addr);
+ void (*set_scissors)(struct radeon_device *rdev, int x1, int y1,
+ int x2, int y2);
+ void (*draw_auto)(struct radeon_device *rdev);
+ void (*set_default_state)(struct radeon_device *rdev);
+};
+
struct r600_blit {
struct mutex mutex;
struct radeon_bo *shader_obj;
+ struct r600_blit_cp_primitives primitives;
+ int max_dim;
+ int ring_size_common;
+ int ring_size_per_loop;
u64 shader_gpu_addr;
u32 vs_offset, ps_offset;
u32 state_offset;
@@ -534,6 +555,8 @@
struct radeon_ib *vb_ib;
};
+void r600_blit_suspend(struct radeon_device *rdev);
+
int radeon_ib_get(struct radeon_device *rdev, struct radeon_ib **ib);
void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib);
int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib);
@@ -601,32 +624,7 @@
extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx);
extern int radeon_cs_finish_pages(struct radeon_cs_parser *p);
-
-
-static inline u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx)
-{
- struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
- u32 pg_idx, pg_offset;
- u32 idx_value = 0;
- int new_page;
-
- pg_idx = (idx * 4) / PAGE_SIZE;
- pg_offset = (idx * 4) % PAGE_SIZE;
-
- if (ibc->kpage_idx[0] == pg_idx)
- return ibc->kpage[0][pg_offset/4];
- if (ibc->kpage_idx[1] == pg_idx)
- return ibc->kpage[1][pg_offset/4];
-
- new_page = radeon_cs_update_pages(p, pg_idx);
- if (new_page < 0) {
- p->parser_error = new_page;
- return 0;
- }
-
- idx_value = ibc->kpage[new_page][pg_offset/4];
- return idx_value;
-}
+extern u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx);
struct radeon_cs_packet {
unsigned idx;
@@ -869,7 +867,7 @@
/*
* Benchmarking
*/
-void radeon_benchmark(struct radeon_device *rdev);
+void radeon_benchmark(struct radeon_device *rdev, int test_number);
/*
@@ -1252,45 +1250,10 @@
void radeon_device_fini(struct radeon_device *rdev);
int radeon_gpu_wait_for_idle(struct radeon_device *rdev);
-static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- if (reg < rdev->rmmio_size)
- return readl((rdev->rmmio) + reg);
- else {
- writel(reg, (rdev->rmmio) + RADEON_MM_INDEX);
- return readl((rdev->rmmio) + RADEON_MM_DATA);
- }
-}
-
-static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- if (reg < rdev->rmmio_size)
- writel(v, (rdev->rmmio) + reg);
- else {
- writel(reg, (rdev->rmmio) + RADEON_MM_INDEX);
- writel(v, (rdev->rmmio) + RADEON_MM_DATA);
- }
-}
-
-static inline u32 r100_io_rreg(struct radeon_device *rdev, u32 reg)
-{
- if (reg < rdev->rio_mem_size)
- return ioread32(rdev->rio_mem + reg);
- else {
- iowrite32(reg, rdev->rio_mem + RADEON_MM_INDEX);
- return ioread32(rdev->rio_mem + RADEON_MM_DATA);
- }
-}
-
-static inline void r100_io_wreg(struct radeon_device *rdev, u32 reg, u32 v)
-{
- if (reg < rdev->rio_mem_size)
- iowrite32(v, rdev->rio_mem + reg);
- else {
- iowrite32(reg, rdev->rio_mem + RADEON_MM_INDEX);
- iowrite32(v, rdev->rio_mem + RADEON_MM_DATA);
- }
-}
+uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg);
+void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+u32 r100_io_rreg(struct radeon_device *rdev, u32 reg);
+void r100_io_wreg(struct radeon_device *rdev, u32 reg, u32 v);
/*
* Cast helper
@@ -1413,19 +1376,19 @@
/*
* RING helpers.
*/
+
+#if DRM_DEBUG_CODE == 0
static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
{
-#if DRM_DEBUG_CODE
- if (rdev->cp.count_dw <= 0) {
- DRM_ERROR("radeon: writting more dword to ring than expected !\n");
- }
-#endif
rdev->cp.ring[rdev->cp.wptr++] = v;
rdev->cp.wptr &= rdev->cp.ptr_mask;
rdev->cp.count_dw--;
rdev->cp.ring_free_dw--;
}
-
+#else
+/* With debugging this is just too big to inline */
+void radeon_ring_write(struct radeon_device *rdev, uint32_t v);
+#endif
/*
* ASICs macro.
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index df8218b..e294456 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -765,9 +765,9 @@
.get_vblank_counter = &evergreen_get_vblank_counter,
.fence_ring_emit = &r600_fence_ring_emit,
.cs_parse = &evergreen_cs_parse,
- .copy_blit = &evergreen_copy_blit,
+ .copy_blit = &r600_copy_blit,
.copy_dma = NULL,
- .copy = &evergreen_copy_blit,
+ .copy = &r600_copy_blit,
.get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
.get_memory_clock = &radeon_atom_get_memory_clock,
@@ -812,9 +812,9 @@
.get_vblank_counter = &evergreen_get_vblank_counter,
.fence_ring_emit = &r600_fence_ring_emit,
.cs_parse = &evergreen_cs_parse,
- .copy_blit = &evergreen_copy_blit,
+ .copy_blit = &r600_copy_blit,
.copy_dma = NULL,
- .copy = &evergreen_copy_blit,
+ .copy = &r600_copy_blit,
.get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
.get_memory_clock = NULL,
@@ -859,9 +859,9 @@
.get_vblank_counter = &evergreen_get_vblank_counter,
.fence_ring_emit = &r600_fence_ring_emit,
.cs_parse = &evergreen_cs_parse,
- .copy_blit = &evergreen_copy_blit,
+ .copy_blit = &r600_copy_blit,
.copy_dma = NULL,
- .copy = &evergreen_copy_blit,
+ .copy = &r600_copy_blit,
.get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
.get_memory_clock = &radeon_atom_get_memory_clock,
@@ -906,9 +906,9 @@
.get_vblank_counter = &evergreen_get_vblank_counter,
.fence_ring_emit = &r600_fence_ring_emit,
.cs_parse = &evergreen_cs_parse,
- .copy_blit = &evergreen_copy_blit,
+ .copy_blit = &r600_copy_blit,
.copy_dma = NULL,
- .copy = &evergreen_copy_blit,
+ .copy = &r600_copy_blit,
.get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
.get_memory_clock = &radeon_atom_get_memory_clock,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 3dedaa07..85f14f0 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -364,11 +364,11 @@
int r600_hdmi_buffer_status_changed(struct drm_encoder *encoder);
void r600_hdmi_update_audio_settings(struct drm_encoder *encoder);
/* r600 blit */
-int r600_blit_prepare_copy(struct radeon_device *rdev, int size_bytes);
+int r600_blit_prepare_copy(struct radeon_device *rdev, unsigned num_gpu_pages);
void r600_blit_done_copy(struct radeon_device *rdev, struct radeon_fence *fence);
void r600_kms_blit_copy(struct radeon_device *rdev,
u64 src_gpu_addr, u64 dst_gpu_addr,
- int size_bytes);
+ unsigned num_gpu_pages);
/*
* rv770,rv730,rv710,rv740
@@ -401,9 +401,6 @@
int evergreen_asic_reset(struct radeon_device *rdev);
void evergreen_bandwidth_update(struct radeon_device *rdev);
void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
-int evergreen_copy_blit(struct radeon_device *rdev,
- uint64_t src_offset, uint64_t dst_offset,
- unsigned num_gpu_pages, struct radeon_fence *fence);
void evergreen_hpd_init(struct radeon_device *rdev);
void evergreen_hpd_fini(struct radeon_device *rdev);
bool evergreen_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
@@ -421,13 +418,6 @@
extern void evergreen_post_page_flip(struct radeon_device *rdev, int crtc);
void evergreen_disable_interrupt_state(struct radeon_device *rdev);
int evergreen_blit_init(struct radeon_device *rdev);
-void evergreen_blit_fini(struct radeon_device *rdev);
-/* evergreen blit */
-int evergreen_blit_prepare_copy(struct radeon_device *rdev, int size_bytes);
-void evergreen_blit_done_copy(struct radeon_device *rdev, struct radeon_fence *fence);
-void evergreen_kms_blit_copy(struct radeon_device *rdev,
- u64 src_gpu_addr, u64 dst_gpu_addr,
- int size_bytes);
/*
* cayman
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index bf2b615..08d0b94 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -62,7 +62,7 @@
struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 info_2d1;
};
-static inline struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rdev,
+static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rdev,
uint8_t id)
{
struct atom_context *ctx = rdev->mode_info.atom_context;
@@ -228,7 +228,7 @@
}
}
-static inline struct radeon_gpio_rec radeon_lookup_gpio(struct radeon_device *rdev,
+static struct radeon_gpio_rec radeon_lookup_gpio(struct radeon_device *rdev,
u8 id)
{
struct atom_context *ctx = rdev->mode_info.atom_context;
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index 10191d9..5cafc90 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -26,21 +26,81 @@
#include "radeon_reg.h"
#include "radeon.h"
-void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
- unsigned sdomain, unsigned ddomain)
+#define RADEON_BENCHMARK_COPY_BLIT 1
+#define RADEON_BENCHMARK_COPY_DMA 0
+
+#define RADEON_BENCHMARK_ITERATIONS 1024
+#define RADEON_BENCHMARK_COMMON_MODES_N 17
+
+static int radeon_benchmark_do_move(struct radeon_device *rdev, unsigned size,
+ uint64_t saddr, uint64_t daddr,
+ int flag, int n)
+{
+ unsigned long start_jiffies;
+ unsigned long end_jiffies;
+ struct radeon_fence *fence = NULL;
+ int i, r;
+
+ start_jiffies = jiffies;
+ for (i = 0; i < n; i++) {
+ r = radeon_fence_create(rdev, &fence);
+ if (r)
+ return r;
+
+ switch (flag) {
+ case RADEON_BENCHMARK_COPY_DMA:
+ r = radeon_copy_dma(rdev, saddr, daddr,
+ size / RADEON_GPU_PAGE_SIZE,
+ fence);
+ break;
+ case RADEON_BENCHMARK_COPY_BLIT:
+ r = radeon_copy_blit(rdev, saddr, daddr,
+ size / RADEON_GPU_PAGE_SIZE,
+ fence);
+ break;
+ default:
+ DRM_ERROR("Unknown copy method\n");
+ r = -EINVAL;
+ }
+ if (r)
+ goto exit_do_move;
+ r = radeon_fence_wait(fence, false);
+ if (r)
+ goto exit_do_move;
+ radeon_fence_unref(&fence);
+ }
+ end_jiffies = jiffies;
+ r = jiffies_to_msecs(end_jiffies - start_jiffies);
+
+exit_do_move:
+ if (fence)
+ radeon_fence_unref(&fence);
+ return r;
+}
+
+
+static void radeon_benchmark_log_results(int n, unsigned size,
+ unsigned int time,
+ unsigned sdomain, unsigned ddomain,
+ char *kind)
+{
+ unsigned int throughput = (n * (size >> 10)) / time;
+ DRM_INFO("radeon: %s %u bo moves of %u kB from"
+ " %d to %d in %u ms, throughput: %u Mb/s or %u MB/s\n",
+ kind, n, size >> 10, sdomain, ddomain, time,
+ throughput * 8, throughput);
+}
+
+static void radeon_benchmark_move(struct radeon_device *rdev, unsigned size,
+ unsigned sdomain, unsigned ddomain)
{
struct radeon_bo *dobj = NULL;
struct radeon_bo *sobj = NULL;
- struct radeon_fence *fence = NULL;
uint64_t saddr, daddr;
- unsigned long start_jiffies;
- unsigned long end_jiffies;
- unsigned long time;
- unsigned i, n, size;
- int r;
+ int r, n;
+ unsigned int time;
- size = bsize;
- n = 1024;
+ n = RADEON_BENCHMARK_ITERATIONS;
r = radeon_bo_create(rdev, size, PAGE_SIZE, true, sdomain, &sobj);
if (r) {
goto out_cleanup;
@@ -67,65 +127,26 @@
}
/* r100 doesn't have dma engine so skip the test */
- if (rdev->asic->copy_dma) {
-
- start_jiffies = jiffies;
- for (i = 0; i < n; i++) {
- r = radeon_fence_create(rdev, &fence);
- if (r) {
- goto out_cleanup;
- }
-
- r = radeon_copy_dma(rdev, saddr, daddr,
- size / RADEON_GPU_PAGE_SIZE, fence);
-
- if (r) {
- goto out_cleanup;
- }
- r = radeon_fence_wait(fence, false);
- if (r) {
- goto out_cleanup;
- }
- radeon_fence_unref(&fence);
- }
- end_jiffies = jiffies;
- time = end_jiffies - start_jiffies;
- time = jiffies_to_msecs(time);
- if (time > 0) {
- i = ((n * size) >> 10) / time;
- printk(KERN_INFO "radeon: dma %u bo moves of %ukb from"
- " %d to %d in %lums (%ukb/ms %ukb/s %uM/s)\n",
- n, size >> 10,
- sdomain, ddomain, time,
- i, i * 1000, (i * 1000) / 1024);
- }
+ /* also, VRAM-to-VRAM test doesn't make much sense for DMA */
+ /* skip it as well if domains are the same */
+ if ((rdev->asic->copy_dma) && (sdomain != ddomain)) {
+ time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
+ RADEON_BENCHMARK_COPY_DMA, n);
+ if (time < 0)
+ goto out_cleanup;
+ if (time > 0)
+ radeon_benchmark_log_results(n, size, time,
+ sdomain, ddomain, "dma");
}
- start_jiffies = jiffies;
- for (i = 0; i < n; i++) {
- r = radeon_fence_create(rdev, &fence);
- if (r) {
- goto out_cleanup;
- }
- r = radeon_copy_blit(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence);
- if (r) {
- goto out_cleanup;
- }
- r = radeon_fence_wait(fence, false);
- if (r) {
- goto out_cleanup;
- }
- radeon_fence_unref(&fence);
- }
- end_jiffies = jiffies;
- time = end_jiffies - start_jiffies;
- time = jiffies_to_msecs(time);
- if (time > 0) {
- i = ((n * size) >> 10) / time;
- printk(KERN_INFO "radeon: blit %u bo moves of %ukb from %d to %d"
- " in %lums (%ukb/ms %ukb/s %uM/s)\n", n, size >> 10,
- sdomain, ddomain, time, i, i * 1000, (i * 1000) / 1024);
- }
+ time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
+ RADEON_BENCHMARK_COPY_BLIT, n);
+ if (time < 0)
+ goto out_cleanup;
+ if (time > 0)
+ radeon_benchmark_log_results(n, size, time,
+ sdomain, ddomain, "blit");
+
out_cleanup:
if (sobj) {
r = radeon_bo_reserve(sobj, false);
@@ -143,18 +164,92 @@
}
radeon_bo_unref(&dobj);
}
- if (fence) {
- radeon_fence_unref(&fence);
- }
+
if (r) {
- printk(KERN_WARNING "Error while benchmarking BO move.\n");
+ DRM_ERROR("Error while benchmarking BO move.\n");
}
}
-void radeon_benchmark(struct radeon_device *rdev)
+void radeon_benchmark(struct radeon_device *rdev, int test_number)
{
- radeon_benchmark_move(rdev, 1024*1024, RADEON_GEM_DOMAIN_GTT,
- RADEON_GEM_DOMAIN_VRAM);
- radeon_benchmark_move(rdev, 1024*1024, RADEON_GEM_DOMAIN_VRAM,
- RADEON_GEM_DOMAIN_GTT);
+ int i;
+ int common_modes[RADEON_BENCHMARK_COMMON_MODES_N] = {
+ 640 * 480 * 4,
+ 720 * 480 * 4,
+ 800 * 600 * 4,
+ 848 * 480 * 4,
+ 1024 * 768 * 4,
+ 1152 * 768 * 4,
+ 1280 * 720 * 4,
+ 1280 * 800 * 4,
+ 1280 * 854 * 4,
+ 1280 * 960 * 4,
+ 1280 * 1024 * 4,
+ 1440 * 900 * 4,
+ 1400 * 1050 * 4,
+ 1680 * 1050 * 4,
+ 1600 * 1200 * 4,
+ 1920 * 1080 * 4,
+ 1920 * 1200 * 4
+ };
+
+ switch (test_number) {
+ case 1:
+ /* simple test, VRAM to GTT and GTT to VRAM */
+ radeon_benchmark_move(rdev, 1024*1024, RADEON_GEM_DOMAIN_GTT,
+ RADEON_GEM_DOMAIN_VRAM);
+ radeon_benchmark_move(rdev, 1024*1024, RADEON_GEM_DOMAIN_VRAM,
+ RADEON_GEM_DOMAIN_GTT);
+ break;
+ case 2:
+ /* simple test, VRAM to VRAM */
+ radeon_benchmark_move(rdev, 1024*1024, RADEON_GEM_DOMAIN_VRAM,
+ RADEON_GEM_DOMAIN_VRAM);
+ break;
+ case 3:
+ /* GTT to VRAM, buffer size sweep, powers of 2 */
+ for (i = 1; i <= 65536; i <<= 1)
+ radeon_benchmark_move(rdev, i*1024,
+ RADEON_GEM_DOMAIN_GTT,
+ RADEON_GEM_DOMAIN_VRAM);
+ break;
+ case 4:
+ /* VRAM to GTT, buffer size sweep, powers of 2 */
+ for (i = 1; i <= 65536; i <<= 1)
+ radeon_benchmark_move(rdev, i*1024,
+ RADEON_GEM_DOMAIN_VRAM,
+ RADEON_GEM_DOMAIN_GTT);
+ break;
+ case 5:
+ /* VRAM to VRAM, buffer size sweep, powers of 2 */
+ for (i = 1; i <= 65536; i <<= 1)
+ radeon_benchmark_move(rdev, i*1024,
+ RADEON_GEM_DOMAIN_VRAM,
+ RADEON_GEM_DOMAIN_VRAM);
+ break;
+ case 6:
+ /* GTT to VRAM, buffer size sweep, common modes */
+ for (i = 1; i < RADEON_BENCHMARK_COMMON_MODES_N; i++)
+ radeon_benchmark_move(rdev, common_modes[i],
+ RADEON_GEM_DOMAIN_GTT,
+ RADEON_GEM_DOMAIN_VRAM);
+ break;
+ case 7:
+ /* VRAM to GTT, buffer size sweep, common modes */
+ for (i = 1; i < RADEON_BENCHMARK_COMMON_MODES_N; i++)
+ radeon_benchmark_move(rdev, common_modes[i],
+ RADEON_GEM_DOMAIN_VRAM,
+ RADEON_GEM_DOMAIN_GTT);
+ break;
+ case 8:
+ /* VRAM to VRAM, buffer size sweep, common modes */
+ for (i = 1; i < RADEON_BENCHMARK_COMMON_MODES_N; i++)
+ radeon_benchmark_move(rdev, common_modes[i],
+ RADEON_GEM_DOMAIN_VRAM,
+ RADEON_GEM_DOMAIN_VRAM);
+ break;
+
+ default:
+ DRM_ERROR("Unknown benchmark\n");
+ }
}
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 6367524..8bf83c4 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -620,8 +620,8 @@
i2c.y_data_mask = 0x80;
} else {
/* default masks for ddc pads */
- i2c.mask_clk_mask = RADEON_GPIO_EN_1;
- i2c.mask_data_mask = RADEON_GPIO_EN_0;
+ i2c.mask_clk_mask = RADEON_GPIO_MASK_1;
+ i2c.mask_data_mask = RADEON_GPIO_MASK_0;
i2c.a_clk_mask = RADEON_GPIO_A_1;
i2c.a_data_mask = RADEON_GPIO_A_0;
i2c.en_clk_mask = RADEON_GPIO_EN_1;
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 449c3d8..dec6cbe 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -724,6 +724,7 @@
dret = radeon_ddc_probe(radeon_connector,
radeon_connector->requires_extended_probe);
if (dret) {
+ radeon_connector->detected_by_load = false;
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
@@ -750,12 +751,21 @@
} else {
/* if we aren't forcing don't do destructive polling */
- if (!force)
- return connector->status;
+ if (!force) {
+ /* only return the previous status if we last
+ * detected a monitor via load.
+ */
+ if (radeon_connector->detected_by_load)
+ return connector->status;
+ else
+ return ret;
+ }
if (radeon_connector->dac_load_detect && encoder) {
encoder_funcs = encoder->helper_private;
ret = encoder_funcs->detect(encoder, connector);
+ if (ret == connector_status_connected)
+ radeon_connector->detected_by_load = true;
}
}
@@ -897,6 +907,7 @@
dret = radeon_ddc_probe(radeon_connector,
radeon_connector->requires_extended_probe);
if (dret) {
+ radeon_connector->detected_by_load = false;
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
@@ -959,8 +970,18 @@
if ((ret == connector_status_connected) && (radeon_connector->use_digital == true))
goto out;
+ /* DVI-D and HDMI-A are digital only */
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_DVID) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA))
+ goto out;
+
+ /* if we aren't forcing don't do destructive polling */
if (!force) {
- ret = connector->status;
+ /* only return the previous status if we last
+ * detected a monitor via load.
+ */
+ if (radeon_connector->detected_by_load)
+ ret = connector->status;
goto out;
}
@@ -984,6 +1005,7 @@
ret = encoder_funcs->detect(encoder, connector);
if (ret == connector_status_connected) {
radeon_connector->use_digital = false;
+ radeon_connector->detected_by_load = true;
}
}
break;
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index b51e157..c33bc91 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -750,14 +750,15 @@
/* set DMA mask + need_dma32 flags.
* PCIE - can handle 40-bits.
- * IGP - can handle 40-bits (in theory)
+ * IGP - can handle 40-bits
* AGP - generally dma32 is safest
- * PCI - only dma32
+ * PCI - dma32 for legacy pci gart, 40 bits on newer asics
*/
rdev->need_dma32 = false;
if (rdev->flags & RADEON_IS_AGP)
rdev->need_dma32 = true;
- if (rdev->flags & RADEON_IS_PCI)
+ if ((rdev->flags & RADEON_IS_PCI) &&
+ (rdev->family < CHIP_RS400))
rdev->need_dma32 = true;
dma_bits = rdev->need_dma32 ? 32 : 40;
@@ -817,7 +818,7 @@
radeon_test_moves(rdev);
}
if (radeon_benchmarking) {
- radeon_benchmark(rdev);
+ radeon_benchmark(rdev, radeon_benchmarking);
}
return 0;
}
@@ -981,7 +982,7 @@
struct drm_info_list *files;
unsigned num_files;
};
-static struct radeon_debugfs _radeon_debugfs[RADEON_DEBUGFS_MAX_NUM_FILES];
+static struct radeon_debugfs _radeon_debugfs[RADEON_DEBUGFS_MAX_COMPONENTS];
static unsigned _radeon_debugfs_count = 0;
int radeon_debugfs_add_files(struct radeon_device *rdev,
@@ -996,14 +997,17 @@
return 0;
}
}
- if ((_radeon_debugfs_count + nfiles) > RADEON_DEBUGFS_MAX_NUM_FILES) {
- DRM_ERROR("Reached maximum number of debugfs files.\n");
- DRM_ERROR("Report so we increase RADEON_DEBUGFS_MAX_NUM_FILES.\n");
+
+ i = _radeon_debugfs_count + 1;
+ if (i > RADEON_DEBUGFS_MAX_COMPONENTS) {
+ DRM_ERROR("Reached maximum number of debugfs components.\n");
+ DRM_ERROR("Report so we increase "
+ "RADEON_DEBUGFS_MAX_COMPONENTS.\n");
return -EINVAL;
}
_radeon_debugfs[_radeon_debugfs_count].files = files;
_radeon_debugfs[_radeon_debugfs_count].num_files = nfiles;
- _radeon_debugfs_count++;
+ _radeon_debugfs_count = i;
#if defined(CONFIG_DEBUG_FS)
drm_debugfs_create_files(files, nfiles,
rdev->ddev->control->debugfs_root,
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 3475a09..76ec0e9 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -263,7 +263,7 @@
*/
if (seq == rdev->fence_drv.last_seq && radeon_gpu_is_lockup(rdev)) {
/* good news we believe it's a lockup */
- WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n",
+ printk(KERN_WARNING "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n",
fence->seq, seq);
/* FIXME: what should we do ? marking everyone
* as signaled for now
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index a533f52..fdc3a9a 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -142,7 +142,7 @@
u64 page_base;
if (!rdev->gart.ready) {
- WARN(1, "trying to unbind memory to unitialized GART !\n");
+ WARN(1, "trying to unbind memory from uninitialized GART !\n");
return;
}
t = offset / RADEON_GPU_PAGE_SIZE;
@@ -174,7 +174,7 @@
int i, j;
if (!rdev->gart.ready) {
- WARN(1, "trying to bind memory to unitialized GART !\n");
+ WARN(1, "trying to bind memory to uninitialized GART !\n");
return -EINVAL;
}
t = offset / RADEON_GPU_PAGE_SIZE;
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 6c111c1..02cb7da 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -81,8 +81,9 @@
/* bit banging i2c */
-static void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state)
+static int pre_xfer(struct i2c_adapter *i2c_adap)
{
+ struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
struct radeon_device *rdev = i2c->dev->dev_private;
struct radeon_i2c_bus_rec *rec = &i2c->rec;
uint32_t temp;
@@ -137,19 +138,30 @@
WREG32(rec->en_data_reg, temp);
/* mask the gpio pins for software use */
- temp = RREG32(rec->mask_clk_reg);
- if (lock_state)
- temp |= rec->mask_clk_mask;
- else
- temp &= ~rec->mask_clk_mask;
+ temp = RREG32(rec->mask_clk_reg) | rec->mask_clk_mask;
WREG32(rec->mask_clk_reg, temp);
temp = RREG32(rec->mask_clk_reg);
+ temp = RREG32(rec->mask_data_reg) | rec->mask_data_mask;
+ WREG32(rec->mask_data_reg, temp);
temp = RREG32(rec->mask_data_reg);
- if (lock_state)
- temp |= rec->mask_data_mask;
- else
- temp &= ~rec->mask_data_mask;
+
+ return 0;
+}
+
+static void post_xfer(struct i2c_adapter *i2c_adap)
+{
+ struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
+ struct radeon_device *rdev = i2c->dev->dev_private;
+ struct radeon_i2c_bus_rec *rec = &i2c->rec;
+ uint32_t temp;
+
+ /* unmask the gpio pins for software use */
+ temp = RREG32(rec->mask_clk_reg) & ~rec->mask_clk_mask;
+ WREG32(rec->mask_clk_reg, temp);
+ temp = RREG32(rec->mask_clk_reg);
+
+ temp = RREG32(rec->mask_data_reg) & ~rec->mask_data_mask;
WREG32(rec->mask_data_reg, temp);
temp = RREG32(rec->mask_data_reg);
}
@@ -209,22 +221,6 @@
WREG32(rec->en_data_reg, val);
}
-static int pre_xfer(struct i2c_adapter *i2c_adap)
-{
- struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
-
- radeon_i2c_do_lock(i2c, 1);
-
- return 0;
-}
-
-static void post_xfer(struct i2c_adapter *i2c_adap)
-{
- struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
-
- radeon_i2c_do_lock(i2c, 0);
-}
-
/* hw i2c */
static u32 radeon_get_i2c_prescale(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 465746b..00da384 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -129,7 +129,7 @@
}
}
-static inline u32 radeon_acknowledge_irqs(drm_radeon_private_t *dev_priv, u32 *r500_disp_int)
+static u32 radeon_acknowledge_irqs(drm_radeon_private_t *dev_priv, u32 *r500_disp_int)
{
u32 irqs = RADEON_READ(RADEON_GEN_INT_STATUS);
u32 irq_mask = RADEON_SW_INT_TEST;
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index c7b6cb4..b37ec0f 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -864,7 +864,7 @@
*v_sync_strt_wid = tmp;
}
-static inline int get_post_div(int value)
+static int get_post_div(int value)
{
int post_div;
switch (value) {
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 68820f5..ed0178f 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -447,6 +447,7 @@
struct edid *edid;
void *con_priv;
bool dac_load_detect;
+ bool detected_by_load; /* if the connection status was determined by load */
uint16_t connector_object_id;
struct radeon_hpd hpd;
struct radeon_router router;
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 976c3b1..1c85152 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -515,3 +515,44 @@
}
return 0;
}
+
+int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type, bool no_wait)
+{
+ int r;
+
+ r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
+ if (unlikely(r != 0))
+ return r;
+ spin_lock(&bo->tbo.bdev->fence_lock);
+ if (mem_type)
+ *mem_type = bo->tbo.mem.mem_type;
+ if (bo->tbo.sync_obj)
+ r = ttm_bo_wait(&bo->tbo, true, true, no_wait);
+ spin_unlock(&bo->tbo.bdev->fence_lock);
+ ttm_bo_unreserve(&bo->tbo);
+ return r;
+}
+
+
+/**
+ * radeon_bo_reserve - reserve bo
+ * @bo: bo structure
+ * @no_wait: don't sleep while trying to reserve (return -EBUSY)
+ *
+ * Returns:
+ * -EBUSY: buffer is busy and @no_wait is true
+ * -ERESTARTSYS: A wait for the buffer to become unreserved was interrupted by
+ * a signal. Release all buffer reservations and return to user-space.
+ */
+int radeon_bo_reserve(struct radeon_bo *bo, bool no_wait)
+{
+ int r;
+
+ r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
+ if (unlikely(r != 0)) {
+ if (r != -ERESTARTSYS)
+ dev_err(bo->rdev->dev, "%p reserve failed\n", bo);
+ return r;
+ }
+ return 0;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index ede6c13..b07f0f9 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -52,28 +52,7 @@
return 0;
}
-/**
- * radeon_bo_reserve - reserve bo
- * @bo: bo structure
- * @no_wait: don't sleep while trying to reserve (return -EBUSY)
- *
- * Returns:
- * -EBUSY: buffer is busy and @no_wait is true
- * -ERESTARTSYS: A wait for the buffer to become unreserved was interrupted by
- * a signal. Release all buffer reservations and return to user-space.
- */
-static inline int radeon_bo_reserve(struct radeon_bo *bo, bool no_wait)
-{
- int r;
-
- r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
- if (unlikely(r != 0)) {
- if (r != -ERESTARTSYS)
- dev_err(bo->rdev->dev, "%p reserve failed\n", bo);
- return r;
- }
- return 0;
-}
+int radeon_bo_reserve(struct radeon_bo *bo, bool no_wait);
static inline void radeon_bo_unreserve(struct radeon_bo *bo)
{
@@ -118,23 +97,8 @@
return bo->tbo.addr_space_offset;
}
-static inline int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type,
- bool no_wait)
-{
- int r;
-
- r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
- if (unlikely(r != 0))
- return r;
- spin_lock(&bo->tbo.bdev->fence_lock);
- if (mem_type)
- *mem_type = bo->tbo.mem.mem_type;
- if (bo->tbo.sync_obj)
- r = ttm_bo_wait(&bo->tbo, true, true, no_wait);
- spin_unlock(&bo->tbo.bdev->fence_lock);
- ttm_bo_unreserve(&bo->tbo);
- return r;
-}
+extern int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type,
+ bool no_wait);
extern int radeon_bo_create(struct radeon_device *rdev,
unsigned long size, int byte_align,
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 08c0233..49d5820 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -35,6 +35,44 @@
int radeon_debugfs_ib_init(struct radeon_device *rdev);
+u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx)
+{
+ struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+ u32 pg_idx, pg_offset;
+ u32 idx_value = 0;
+ int new_page;
+
+ pg_idx = (idx * 4) / PAGE_SIZE;
+ pg_offset = (idx * 4) % PAGE_SIZE;
+
+ if (ibc->kpage_idx[0] == pg_idx)
+ return ibc->kpage[0][pg_offset/4];
+ if (ibc->kpage_idx[1] == pg_idx)
+ return ibc->kpage[1][pg_offset/4];
+
+ new_page = radeon_cs_update_pages(p, pg_idx);
+ if (new_page < 0) {
+ p->parser_error = new_page;
+ return 0;
+ }
+
+ idx_value = ibc->kpage[new_page][pg_offset/4];
+ return idx_value;
+}
+
+void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
+{
+#if DRM_DEBUG_CODE
+ if (rdev->cp.count_dw <= 0) {
+ DRM_ERROR("radeon: writting more dword to ring than expected !\n");
+ }
+#endif
+ rdev->cp.ring[rdev->cp.wptr++] = v;
+ rdev->cp.wptr &= rdev->cp.ptr_mask;
+ rdev->cp.count_dw--;
+ rdev->cp.ring_free_dw--;
+}
+
void radeon_ib_bogus_cleanup(struct radeon_device *rdev)
{
struct radeon_ib *ib, *n;
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 92e7ea7..e8422ae 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -272,12 +272,12 @@
return 0;
}
-static __inline__ int radeon_check_and_fixup_packet3(drm_radeon_private_t *
- dev_priv,
- struct drm_file *file_priv,
- drm_radeon_kcmd_buffer_t *
- cmdbuf,
- unsigned int *cmdsz)
+static int radeon_check_and_fixup_packet3(drm_radeon_private_t *
+ dev_priv,
+ struct drm_file *file_priv,
+ drm_radeon_kcmd_buffer_t *
+ cmdbuf,
+ unsigned int *cmdsz)
{
u32 *cmd = drm_buffer_pointer_to_dword(cmdbuf->buffer, 0);
u32 offset, narrays;
@@ -446,8 +446,8 @@
* CP hardware state programming functions
*/
-static __inline__ void radeon_emit_clip_rect(drm_radeon_private_t * dev_priv,
- struct drm_clip_rect * box)
+static void radeon_emit_clip_rect(drm_radeon_private_t * dev_priv,
+ struct drm_clip_rect * box)
{
RING_LOCALS;
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index aa6a66e..89a6e1e 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -182,6 +182,9 @@
/* Enable gart */
WREG32_MC(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | size_reg));
rs400_gart_tlb_flush(rdev);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)rdev->gart.table_addr);
rdev->gart.ready = true;
return 0;
}
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 4b5d0e6..9320dd6 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -484,6 +484,9 @@
tmp = RREG32_MC(R_000009_MC_CNTL1);
WREG32_MC(R_000009_MC_CNTL1, (tmp | S_000009_ENABLE_PAGE_TABLES(1)));
rs600_gart_tlb_flush(rdev);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)rdev->gart.table_addr);
rdev->gart.ready = true;
return 0;
}
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b13c2ee..87cc1fe 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -161,6 +161,9 @@
WREG32(VM_CONTEXT0_CNTL + (i * 4), 0);
r600_pcie_gart_tlb_flush(rdev);
+ DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
+ (unsigned)(rdev->mc.gtt_size >> 20),
+ (unsigned long long)rdev->gart.table_addr);
rdev->gart.ready = true;
return 0;
}
@@ -1184,8 +1187,6 @@
int rv770_suspend(struct radeon_device *rdev)
{
- int r;
-
r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
r700_cp_stop(rdev);
@@ -1193,14 +1194,8 @@
r600_irq_suspend(rdev);
radeon_wb_disable(rdev);
rv770_pcie_gart_disable(rdev);
- /* unpin shaders bo */
- if (rdev->r600_blit.shader_obj) {
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (likely(r == 0)) {
- radeon_bo_unpin(rdev->r600_blit.shader_obj);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
- }
- }
+ r600_blit_suspend(rdev);
+
return 0;
}
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index ef06194..617b646 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1293,6 +1293,7 @@
return ret;
}
+EXPORT_SYMBOL(ttm_bo_create);
static int ttm_bo_force_list_clean(struct ttm_bo_device *bdev,
unsigned mem_type, bool allow_errors)
diff --git a/drivers/gpu/drm/vmwgfx/Kconfig b/drivers/gpu/drm/vmwgfx/Kconfig
index 30ad133..794ff67 100644
--- a/drivers/gpu/drm/vmwgfx/Kconfig
+++ b/drivers/gpu/drm/vmwgfx/Kconfig
@@ -7,7 +7,8 @@
select FB_CFB_IMAGEBLIT
select DRM_TTM
help
- KMS enabled DRM driver for SVGA2 virtual hardware.
-
- If unsure say n. The compiled module will be
- called vmwgfx.ko
+ Choose this option if you would like to run 3D acceleration
+ in a VMware virtual machine.
+ This is a KMS enabled DRM driver for the VMware SVGA2
+ virtual hardware.
+ The compiled module will be called "vmwgfx.ko".
diff --git a/drivers/gpu/drm/vmwgfx/Makefile b/drivers/gpu/drm/vmwgfx/Makefile
index c9281a1..586869c 100644
--- a/drivers/gpu/drm/vmwgfx/Makefile
+++ b/drivers/gpu/drm/vmwgfx/Makefile
@@ -4,6 +4,7 @@
vmwgfx-y := vmwgfx_execbuf.o vmwgfx_gmr.o vmwgfx_kms.o vmwgfx_drv.o \
vmwgfx_fb.o vmwgfx_ioctl.o vmwgfx_resource.o vmwgfx_buffer.o \
vmwgfx_fifo.o vmwgfx_irq.o vmwgfx_ldu.o vmwgfx_ttm_glue.o \
- vmwgfx_overlay.o vmwgfx_fence.o vmwgfx_gmrid_manager.o
+ vmwgfx_overlay.o vmwgfx_marker.o vmwgfx_gmrid_manager.o \
+ vmwgfx_fence.o vmwgfx_dmabuf.o vmwgfx_scrn.o
obj-$(CONFIG_DRM_VMWGFX) := vmwgfx.o
diff --git a/drivers/gpu/drm/vmwgfx/svga3d_reg.h b/drivers/gpu/drm/vmwgfx/svga3d_reg.h
index 77cb453..d0e085e 100644
--- a/drivers/gpu/drm/vmwgfx/svga3d_reg.h
+++ b/drivers/gpu/drm/vmwgfx/svga3d_reg.h
@@ -57,7 +57,8 @@
SVGA3D_HWVERSION_WS6_B1 = SVGA3D_MAKE_HWVERSION(1, 1),
SVGA3D_HWVERSION_FUSION_11 = SVGA3D_MAKE_HWVERSION(1, 4),
SVGA3D_HWVERSION_WS65_B1 = SVGA3D_MAKE_HWVERSION(2, 0),
- SVGA3D_HWVERSION_CURRENT = SVGA3D_HWVERSION_WS65_B1,
+ SVGA3D_HWVERSION_WS8_B1 = SVGA3D_MAKE_HWVERSION(2, 1),
+ SVGA3D_HWVERSION_CURRENT = SVGA3D_HWVERSION_WS8_B1,
} SVGA3dHardwareVersion;
/*
@@ -67,7 +68,8 @@
typedef uint32 SVGA3dBool; /* 32-bit Bool definition */
#define SVGA3D_NUM_CLIPPLANES 6
#define SVGA3D_MAX_SIMULTANEOUS_RENDER_TARGETS 8
-
+#define SVGA3D_MAX_CONTEXT_IDS 256
+#define SVGA3D_MAX_SURFACE_IDS (32 * 1024)
/*
* Surface formats.
@@ -79,76 +81,91 @@
*/
typedef enum SVGA3dSurfaceFormat {
- SVGA3D_FORMAT_INVALID = 0,
+ SVGA3D_FORMAT_INVALID = 0,
- SVGA3D_X8R8G8B8 = 1,
- SVGA3D_A8R8G8B8 = 2,
+ SVGA3D_X8R8G8B8 = 1,
+ SVGA3D_A8R8G8B8 = 2,
- SVGA3D_R5G6B5 = 3,
- SVGA3D_X1R5G5B5 = 4,
- SVGA3D_A1R5G5B5 = 5,
- SVGA3D_A4R4G4B4 = 6,
+ SVGA3D_R5G6B5 = 3,
+ SVGA3D_X1R5G5B5 = 4,
+ SVGA3D_A1R5G5B5 = 5,
+ SVGA3D_A4R4G4B4 = 6,
- SVGA3D_Z_D32 = 7,
- SVGA3D_Z_D16 = 8,
- SVGA3D_Z_D24S8 = 9,
- SVGA3D_Z_D15S1 = 10,
+ SVGA3D_Z_D32 = 7,
+ SVGA3D_Z_D16 = 8,
+ SVGA3D_Z_D24S8 = 9,
+ SVGA3D_Z_D15S1 = 10,
- SVGA3D_LUMINANCE8 = 11,
- SVGA3D_LUMINANCE4_ALPHA4 = 12,
- SVGA3D_LUMINANCE16 = 13,
- SVGA3D_LUMINANCE8_ALPHA8 = 14,
+ SVGA3D_LUMINANCE8 = 11,
+ SVGA3D_LUMINANCE4_ALPHA4 = 12,
+ SVGA3D_LUMINANCE16 = 13,
+ SVGA3D_LUMINANCE8_ALPHA8 = 14,
- SVGA3D_DXT1 = 15,
- SVGA3D_DXT2 = 16,
- SVGA3D_DXT3 = 17,
- SVGA3D_DXT4 = 18,
- SVGA3D_DXT5 = 19,
+ SVGA3D_DXT1 = 15,
+ SVGA3D_DXT2 = 16,
+ SVGA3D_DXT3 = 17,
+ SVGA3D_DXT4 = 18,
+ SVGA3D_DXT5 = 19,
- SVGA3D_BUMPU8V8 = 20,
- SVGA3D_BUMPL6V5U5 = 21,
- SVGA3D_BUMPX8L8V8U8 = 22,
- SVGA3D_BUMPL8V8U8 = 23,
+ SVGA3D_BUMPU8V8 = 20,
+ SVGA3D_BUMPL6V5U5 = 21,
+ SVGA3D_BUMPX8L8V8U8 = 22,
+ SVGA3D_BUMPL8V8U8 = 23,
- SVGA3D_ARGB_S10E5 = 24, /* 16-bit floating-point ARGB */
- SVGA3D_ARGB_S23E8 = 25, /* 32-bit floating-point ARGB */
+ SVGA3D_ARGB_S10E5 = 24, /* 16-bit floating-point ARGB */
+ SVGA3D_ARGB_S23E8 = 25, /* 32-bit floating-point ARGB */
- SVGA3D_A2R10G10B10 = 26,
+ SVGA3D_A2R10G10B10 = 26,
/* signed formats */
- SVGA3D_V8U8 = 27,
- SVGA3D_Q8W8V8U8 = 28,
- SVGA3D_CxV8U8 = 29,
+ SVGA3D_V8U8 = 27,
+ SVGA3D_Q8W8V8U8 = 28,
+ SVGA3D_CxV8U8 = 29,
/* mixed formats */
- SVGA3D_X8L8V8U8 = 30,
- SVGA3D_A2W10V10U10 = 31,
+ SVGA3D_X8L8V8U8 = 30,
+ SVGA3D_A2W10V10U10 = 31,
- SVGA3D_ALPHA8 = 32,
+ SVGA3D_ALPHA8 = 32,
/* Single- and dual-component floating point formats */
- SVGA3D_R_S10E5 = 33,
- SVGA3D_R_S23E8 = 34,
- SVGA3D_RG_S10E5 = 35,
- SVGA3D_RG_S23E8 = 36,
+ SVGA3D_R_S10E5 = 33,
+ SVGA3D_R_S23E8 = 34,
+ SVGA3D_RG_S10E5 = 35,
+ SVGA3D_RG_S23E8 = 36,
/*
* Any surface can be used as a buffer object, but SVGA3D_BUFFER is
* the most efficient format to use when creating new surfaces
* expressly for index or vertex data.
*/
- SVGA3D_BUFFER = 37,
- SVGA3D_Z_D24X8 = 38,
+ SVGA3D_BUFFER = 37,
- SVGA3D_V16U16 = 39,
+ SVGA3D_Z_D24X8 = 38,
- SVGA3D_G16R16 = 40,
- SVGA3D_A16B16G16R16 = 41,
+ SVGA3D_V16U16 = 39,
+
+ SVGA3D_G16R16 = 40,
+ SVGA3D_A16B16G16R16 = 41,
/* Packed Video formats */
- SVGA3D_UYVY = 42,
- SVGA3D_YUY2 = 43,
+ SVGA3D_UYVY = 42,
+ SVGA3D_YUY2 = 43,
+
+ /* Planar video formats */
+ SVGA3D_NV12 = 44,
+
+ /* Video format with alpha */
+ SVGA3D_AYUV = 45,
+
+ SVGA3D_BC4_UNORM = 108,
+ SVGA3D_BC5_UNORM = 111,
+
+ /* Advanced D3D9 depth formats. */
+ SVGA3D_Z_DF16 = 118,
+ SVGA3D_Z_DF24 = 119,
+ SVGA3D_Z_D24S8_INT = 120,
SVGA3D_FORMAT_MAX
} SVGA3dSurfaceFormat;
@@ -414,10 +431,20 @@
SVGA3D_RS_SRCBLENDALPHA = 94, /* SVGA3dBlendOp */
SVGA3D_RS_DSTBLENDALPHA = 95, /* SVGA3dBlendOp */
SVGA3D_RS_BLENDEQUATIONALPHA = 96, /* SVGA3dBlendEquation */
+ SVGA3D_RS_TRANSPARENCYANTIALIAS = 97, /* SVGA3dTransparencyAntialiasType */
+ SVGA3D_RS_LINEAA = 98, /* SVGA3dBool */
+ SVGA3D_RS_LINEWIDTH = 99, /* float */
SVGA3D_RS_MAX
} SVGA3dRenderStateName;
typedef enum {
+ SVGA3D_TRANSPARENCYANTIALIAS_NORMAL = 0,
+ SVGA3D_TRANSPARENCYANTIALIAS_ALPHATOCOVERAGE = 1,
+ SVGA3D_TRANSPARENCYANTIALIAS_SUPERSAMPLE = 2,
+ SVGA3D_TRANSPARENCYANTIALIAS_MAX
+} SVGA3dTransparencyAntialiasType;
+
+typedef enum {
SVGA3D_VERTEXMATERIAL_NONE = 0, /* Use the value in the current material */
SVGA3D_VERTEXMATERIAL_DIFFUSE = 1, /* Use the value in the diffuse component */
SVGA3D_VERTEXMATERIAL_SPECULAR = 2, /* Use the value in the specular component */
@@ -728,10 +755,10 @@
SVGA3D_TEX_FILTER_NEAREST = 1,
SVGA3D_TEX_FILTER_LINEAR = 2,
SVGA3D_TEX_FILTER_ANISOTROPIC = 3,
- SVGA3D_TEX_FILTER_FLATCUBIC = 4, // Deprecated, not implemented
- SVGA3D_TEX_FILTER_GAUSSIANCUBIC = 5, // Deprecated, not implemented
- SVGA3D_TEX_FILTER_PYRAMIDALQUAD = 6, // Not currently implemented
- SVGA3D_TEX_FILTER_GAUSSIANQUAD = 7, // Not currently implemented
+ SVGA3D_TEX_FILTER_FLATCUBIC = 4, /* Deprecated, not implemented */
+ SVGA3D_TEX_FILTER_GAUSSIANCUBIC = 5, /* Deprecated, not implemented */
+ SVGA3D_TEX_FILTER_PYRAMIDALQUAD = 6, /* Not currently implemented */
+ SVGA3D_TEX_FILTER_GAUSSIANQUAD = 7, /* Not currently implemented */
SVGA3D_TEX_FILTER_MAX
} SVGA3dTextureFilter;
@@ -799,19 +826,19 @@
typedef enum {
SVGA3D_DECLUSAGE_POSITION = 0,
- SVGA3D_DECLUSAGE_BLENDWEIGHT, // 1
- SVGA3D_DECLUSAGE_BLENDINDICES, // 2
- SVGA3D_DECLUSAGE_NORMAL, // 3
- SVGA3D_DECLUSAGE_PSIZE, // 4
- SVGA3D_DECLUSAGE_TEXCOORD, // 5
- SVGA3D_DECLUSAGE_TANGENT, // 6
- SVGA3D_DECLUSAGE_BINORMAL, // 7
- SVGA3D_DECLUSAGE_TESSFACTOR, // 8
- SVGA3D_DECLUSAGE_POSITIONT, // 9
- SVGA3D_DECLUSAGE_COLOR, // 10
- SVGA3D_DECLUSAGE_FOG, // 11
- SVGA3D_DECLUSAGE_DEPTH, // 12
- SVGA3D_DECLUSAGE_SAMPLE, // 13
+ SVGA3D_DECLUSAGE_BLENDWEIGHT, /* 1 */
+ SVGA3D_DECLUSAGE_BLENDINDICES, /* 2 */
+ SVGA3D_DECLUSAGE_NORMAL, /* 3 */
+ SVGA3D_DECLUSAGE_PSIZE, /* 4 */
+ SVGA3D_DECLUSAGE_TEXCOORD, /* 5 */
+ SVGA3D_DECLUSAGE_TANGENT, /* 6 */
+ SVGA3D_DECLUSAGE_BINORMAL, /* 7 */
+ SVGA3D_DECLUSAGE_TESSFACTOR, /* 8 */
+ SVGA3D_DECLUSAGE_POSITIONT, /* 9 */
+ SVGA3D_DECLUSAGE_COLOR, /* 10 */
+ SVGA3D_DECLUSAGE_FOG, /* 11 */
+ SVGA3D_DECLUSAGE_DEPTH, /* 12 */
+ SVGA3D_DECLUSAGE_SAMPLE, /* 13 */
SVGA3D_DECLUSAGE_MAX
} SVGA3dDeclUsage;
@@ -819,10 +846,10 @@
SVGA3D_DECLMETHOD_DEFAULT = 0,
SVGA3D_DECLMETHOD_PARTIALU,
SVGA3D_DECLMETHOD_PARTIALV,
- SVGA3D_DECLMETHOD_CROSSUV, // Normal
+ SVGA3D_DECLMETHOD_CROSSUV, /* Normal */
SVGA3D_DECLMETHOD_UV,
- SVGA3D_DECLMETHOD_LOOKUP, // Lookup a displacement map
- SVGA3D_DECLMETHOD_LOOKUPPRESAMPLED, // Lookup a pre-sampled displacement map
+ SVGA3D_DECLMETHOD_LOOKUP, /* Lookup a displacement map */
+ SVGA3D_DECLMETHOD_LOOKUPPRESAMPLED, /* Lookup a pre-sampled displacement map */
} SVGA3dDeclMethod;
typedef enum {
@@ -930,7 +957,6 @@
} SVGA3dCubeFace;
typedef enum {
- SVGA3D_SHADERTYPE_COMPILED_DX8 = 0,
SVGA3D_SHADERTYPE_VS = 1,
SVGA3D_SHADERTYPE_PS = 2,
SVGA3D_SHADERTYPE_MAX
@@ -968,12 +994,18 @@
} SVGA3dTransferType;
/*
- * The maximum number vertex arrays we're guaranteed to support in
+ * The maximum number of vertex arrays we're guaranteed to support in
* SVGA_3D_CMD_DRAWPRIMITIVES.
*/
#define SVGA3D_MAX_VERTEX_ARRAYS 32
/*
+ * The maximum number of primitive ranges we're guaranteed to support
+ * in SVGA_3D_CMD_DRAWPRIMITIVES.
+ */
+#define SVGA3D_MAX_DRAW_PRIMITIVE_RANGES 32
+
+/*
* Identifiers for commands in the command FIFO.
*
* IDs between 1000 and 1039 (inclusive) were used by obsolete versions of
@@ -990,7 +1022,7 @@
#define SVGA_3D_CMD_LEGACY_BASE 1000
#define SVGA_3D_CMD_BASE 1040
-#define SVGA_3D_CMD_SURFACE_DEFINE SVGA_3D_CMD_BASE + 0
+#define SVGA_3D_CMD_SURFACE_DEFINE SVGA_3D_CMD_BASE + 0 /* Deprecated */
#define SVGA_3D_CMD_SURFACE_DESTROY SVGA_3D_CMD_BASE + 1
#define SVGA_3D_CMD_SURFACE_COPY SVGA_3D_CMD_BASE + 2
#define SVGA_3D_CMD_SURFACE_STRETCHBLT SVGA_3D_CMD_BASE + 3
@@ -1008,7 +1040,7 @@
#define SVGA_3D_CMD_SETVIEWPORT SVGA_3D_CMD_BASE + 15
#define SVGA_3D_CMD_SETCLIPPLANE SVGA_3D_CMD_BASE + 16
#define SVGA_3D_CMD_CLEAR SVGA_3D_CMD_BASE + 17
-#define SVGA_3D_CMD_PRESENT SVGA_3D_CMD_BASE + 18 // Deprecated
+#define SVGA_3D_CMD_PRESENT SVGA_3D_CMD_BASE + 18 /* Deprecated */
#define SVGA_3D_CMD_SHADER_DEFINE SVGA_3D_CMD_BASE + 19
#define SVGA_3D_CMD_SHADER_DESTROY SVGA_3D_CMD_BASE + 20
#define SVGA_3D_CMD_SET_SHADER SVGA_3D_CMD_BASE + 21
@@ -1018,9 +1050,13 @@
#define SVGA_3D_CMD_BEGIN_QUERY SVGA_3D_CMD_BASE + 25
#define SVGA_3D_CMD_END_QUERY SVGA_3D_CMD_BASE + 26
#define SVGA_3D_CMD_WAIT_FOR_QUERY SVGA_3D_CMD_BASE + 27
-#define SVGA_3D_CMD_PRESENT_READBACK SVGA_3D_CMD_BASE + 28 // Deprecated
+#define SVGA_3D_CMD_PRESENT_READBACK SVGA_3D_CMD_BASE + 28 /* Deprecated */
#define SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN SVGA_3D_CMD_BASE + 29
-#define SVGA_3D_CMD_MAX SVGA_3D_CMD_BASE + 30
+#define SVGA_3D_CMD_SURFACE_DEFINE_V2 SVGA_3D_CMD_BASE + 30
+#define SVGA_3D_CMD_GENERATE_MIPMAPS SVGA_3D_CMD_BASE + 31
+#define SVGA_3D_CMD_ACTIVATE_SURFACE SVGA_3D_CMD_BASE + 40
+#define SVGA_3D_CMD_DEACTIVATE_SURFACE SVGA_3D_CMD_BASE + 41
+#define SVGA_3D_CMD_MAX SVGA_3D_CMD_BASE + 42
#define SVGA_3D_CMD_FUTURE_MAX 2000
@@ -1031,9 +1067,9 @@
typedef struct {
union {
struct {
- uint16 function; // SVGA3dFogFunction
- uint8 type; // SVGA3dFogType
- uint8 base; // SVGA3dFogBase
+ uint16 function; /* SVGA3dFogFunction */
+ uint8 type; /* SVGA3dFogType */
+ uint8 base; /* SVGA3dFogBase */
};
uint32 uintValue;
};
@@ -1109,6 +1145,8 @@
SVGA3D_SURFACE_HINT_RENDERTARGET = (1 << 6),
SVGA3D_SURFACE_HINT_DEPTHSTENCIL = (1 << 7),
SVGA3D_SURFACE_HINT_WRITEONLY = (1 << 8),
+ SVGA3D_SURFACE_MASKABLE_ANTIALIAS = (1 << 9),
+ SVGA3D_SURFACE_AUTOGENMIPMAPS = (1 << 10),
} SVGA3dSurfaceFlags;
typedef
@@ -1121,6 +1159,12 @@
uint32 sid;
SVGA3dSurfaceFlags surfaceFlags;
SVGA3dSurfaceFormat format;
+ /*
+ * If surfaceFlags has SVGA3D_SURFACE_CUBEMAP bit set, all SVGA3dSurfaceFace
+ * structures must have the same value of numMipLevels field.
+ * Otherwise, all but the first SVGA3dSurfaceFace structures must have the
+ * numMipLevels set to 0.
+ */
SVGA3dSurfaceFace face[SVGA3D_MAX_SURFACE_FACES];
/*
* Followed by an SVGA3dSize structure for each mip level in each face.
@@ -1135,6 +1179,31 @@
typedef
struct {
+ uint32 sid;
+ SVGA3dSurfaceFlags surfaceFlags;
+ SVGA3dSurfaceFormat format;
+ /*
+ * If surfaceFlags has SVGA3D_SURFACE_CUBEMAP bit set, all SVGA3dSurfaceFace
+ * structures must have the same value of numMipLevels field.
+ * Otherwise, all but the first SVGA3dSurfaceFace structures must have the
+ * numMipLevels set to 0.
+ */
+ SVGA3dSurfaceFace face[SVGA3D_MAX_SURFACE_FACES];
+ uint32 multisampleCount;
+ SVGA3dTextureFilter autogenFilter;
+ /*
+ * Followed by an SVGA3dSize structure for each mip level in each face.
+ *
+ * A note on surface sizes: Sizes are always specified in pixels,
+ * even if the true surface size is not a multiple of the minimum
+ * block size of the surface's format. For example, a 3x3x1 DXT1
+ * compressed texture would actually be stored as a 4x4x1 image in
+ * memory.
+ */
+} SVGA3dCmdDefineSurface_v2; /* SVGA_3D_CMD_SURFACE_DEFINE_V2 */
+
+typedef
+struct {
uint32 sid;
} SVGA3dCmdDestroySurface; /* SVGA_3D_CMD_SURFACE_DESTROY */
@@ -1474,10 +1543,12 @@
* SVGA3dCmdDrawPrimitives structure. In order,
* they are:
*
- * 1. SVGA3dVertexDecl, quantity 'numVertexDecls'
- * 2. SVGA3dPrimitiveRange, quantity 'numRanges'
+ * 1. SVGA3dVertexDecl, quantity 'numVertexDecls', but no more than
+ * SVGA3D_MAX_VERTEX_ARRAYS;
+ * 2. SVGA3dPrimitiveRange, quantity 'numRanges', but no more than
+ * SVGA3D_MAX_DRAW_PRIMITIVE_RANGES;
* 3. Optionally, SVGA3dVertexDivisor, quantity 'numVertexDecls' (contains
- * the frequency divisor for this the corresponding vertex decl)
+ * the frequency divisor for the corresponding vertex decl).
*/
} SVGA3dCmdDrawPrimitives; /* SVGA_3D_CMD_DRAWPRIMITIVES */
@@ -1671,6 +1742,12 @@
/* Clipping: zero or more SVGASignedRects follow */
} SVGA3dCmdBlitSurfaceToScreen; /* SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN */
+typedef
+struct {
+ uint32 sid;
+ SVGA3dTextureFilter filter;
+} SVGA3dCmdGenerateMipmaps; /* SVGA_3D_CMD_GENERATE_MIPMAPS */
+
/*
* Capability query index.
@@ -1774,6 +1851,32 @@
SVGA3D_DEVCAP_SURFACEFMT_A16B16G16R16 = 67,
SVGA3D_DEVCAP_SURFACEFMT_UYVY = 68,
SVGA3D_DEVCAP_SURFACEFMT_YUY2 = 69,
+ SVGA3D_DEVCAP_MULTISAMPLE_NONMASKABLESAMPLES = 70,
+ SVGA3D_DEVCAP_MULTISAMPLE_MASKABLESAMPLES = 71,
+ SVGA3D_DEVCAP_ALPHATOCOVERAGE = 72,
+ SVGA3D_DEVCAP_SUPERSAMPLE = 73,
+ SVGA3D_DEVCAP_AUTOGENMIPMAPS = 74,
+ SVGA3D_DEVCAP_SURFACEFMT_NV12 = 75,
+ SVGA3D_DEVCAP_SURFACEFMT_AYUV = 76,
+
+ /*
+ * This is the maximum number of SVGA context IDs that the guest
+ * can define using SVGA_3D_CMD_CONTEXT_DEFINE.
+ */
+ SVGA3D_DEVCAP_MAX_CONTEXT_IDS = 77,
+
+ /*
+ * This is the maximum number of SVGA surface IDs that the guest
+ * can define using SVGA_3D_CMD_SURFACE_DEFINE*.
+ */
+ SVGA3D_DEVCAP_MAX_SURFACE_IDS = 78,
+
+ SVGA3D_DEVCAP_SURFACEFMT_Z_DF16 = 79,
+ SVGA3D_DEVCAP_SURFACEFMT_Z_DF24 = 80,
+ SVGA3D_DEVCAP_SURFACEFMT_Z_D24S8_INT = 81,
+
+ SVGA3D_DEVCAP_SURFACEFMT_BC4_UNORM = 82,
+ SVGA3D_DEVCAP_SURFACEFMT_BC5_UNORM = 83,
/*
* Don't add new caps into the previous section; the values in this
diff --git a/drivers/gpu/drm/vmwgfx/svga_escape.h b/drivers/gpu/drm/vmwgfx/svga_escape.h
index 7b85e9b..8e8d968 100644
--- a/drivers/gpu/drm/vmwgfx/svga_escape.h
+++ b/drivers/gpu/drm/vmwgfx/svga_escape.h
@@ -75,7 +75,7 @@
*/
#define SVGA_ESCAPE_VMWARE_HINT 0x00030000
-#define SVGA_ESCAPE_VMWARE_HINT_FULLSCREEN 0x00030001 // Deprecated
+#define SVGA_ESCAPE_VMWARE_HINT_FULLSCREEN 0x00030001 /* Deprecated */
typedef
struct {
diff --git a/drivers/gpu/drm/vmwgfx/svga_overlay.h b/drivers/gpu/drm/vmwgfx/svga_overlay.h
index f753d73..f38416f 100644
--- a/drivers/gpu/drm/vmwgfx/svga_overlay.h
+++ b/drivers/gpu/drm/vmwgfx/svga_overlay.h
@@ -38,9 +38,9 @@
* Video formats we support
*/
-#define VMWARE_FOURCC_YV12 0x32315659 // 'Y' 'V' '1' '2'
-#define VMWARE_FOURCC_YUY2 0x32595559 // 'Y' 'U' 'Y' '2'
-#define VMWARE_FOURCC_UYVY 0x59565955 // 'U' 'Y' 'V' 'Y'
+#define VMWARE_FOURCC_YV12 0x32315659 /* 'Y' 'V' '1' '2' */
+#define VMWARE_FOURCC_YUY2 0x32595559 /* 'Y' 'U' 'Y' '2' */
+#define VMWARE_FOURCC_UYVY 0x59565955 /* 'U' 'Y' 'V' 'Y' */
typedef enum {
SVGA_OVERLAY_FORMAT_INVALID = 0,
@@ -68,7 +68,7 @@
uint32 streamId;
} header;
- // May include zero or more items.
+ /* May include zero or more items. */
struct {
uint32 registerId;
uint32 value;
@@ -134,12 +134,12 @@
*/
static inline bool
-VMwareVideoGetAttributes(const SVGAOverlayFormat format, // IN
- uint32 *width, // IN / OUT
- uint32 *height, // IN / OUT
- uint32 *size, // OUT
- uint32 *pitches, // OUT (optional)
- uint32 *offsets) // OUT (optional)
+VMwareVideoGetAttributes(const SVGAOverlayFormat format, /* IN */
+ uint32 *width, /* IN / OUT */
+ uint32 *height, /* IN / OUT */
+ uint32 *size, /* OUT */
+ uint32 *pitches, /* OUT (optional) */
+ uint32 *offsets) /* OUT (optional) */
{
int tmp;
@@ -198,4 +198,4 @@
return true;
}
-#endif // _SVGA_OVERLAY_H_
+#endif /* _SVGA_OVERLAY_H_ */
diff --git a/drivers/gpu/drm/vmwgfx/svga_reg.h b/drivers/gpu/drm/vmwgfx/svga_reg.h
index 1b96c2e..01f63cb 100644
--- a/drivers/gpu/drm/vmwgfx/svga_reg.h
+++ b/drivers/gpu/drm/vmwgfx/svga_reg.h
@@ -39,6 +39,15 @@
#define PCI_DEVICE_ID_VMWARE_SVGA2 0x0405
/*
+ * SVGA_REG_ENABLE bit definitions.
+ */
+#define SVGA_REG_ENABLE_DISABLE 0
+#define SVGA_REG_ENABLE_ENABLE 1
+#define SVGA_REG_ENABLE_HIDE 2
+#define SVGA_REG_ENABLE_ENABLE_HIDE (SVGA_REG_ENABLE_ENABLE |\
+ SVGA_REG_ENABLE_HIDE)
+
+/*
* Legal values for the SVGA_REG_CURSOR_ON register in old-fashioned
* cursor bypass mode. This is still supported, but no new guest
* drivers should use it.
@@ -158,7 +167,9 @@
SVGA_REG_GMR_MAX_DESCRIPTOR_LENGTH = 44,
SVGA_REG_TRACES = 45, /* Enable trace-based updates even when FIFO is on */
- SVGA_REG_TOP = 46, /* Must be 1 more than the last register */
+ SVGA_REG_GMRS_MAX_PAGES = 46, /* Maximum number of 4KB pages for all GMRs */
+ SVGA_REG_MEMORY_SIZE = 47, /* Total dedicated device memory excluding FIFO */
+ SVGA_REG_TOP = 48, /* Must be 1 more than the last register */
SVGA_PALETTE_BASE = 1024, /* Base of SVGA color map */
/* Next 768 (== 256*3) registers exist for colormap */
@@ -265,7 +276,7 @@
* possible.
*/
#define SVGA_GMR_NULL ((uint32) -1)
-#define SVGA_GMR_FRAMEBUFFER ((uint32) -2) // Guest Framebuffer (GFB)
+#define SVGA_GMR_FRAMEBUFFER ((uint32) -2) /* Guest Framebuffer (GFB) */
typedef
struct SVGAGuestMemDescriptor {
@@ -306,13 +317,35 @@
struct {
uint32 bitsPerPixel : 8;
uint32 colorDepth : 8;
- uint32 reserved : 16; // Must be zero
+ uint32 reserved : 16; /* Must be zero */
};
uint32 value;
};
} SVGAGMRImageFormat;
+typedef
+struct SVGAGuestImage {
+ SVGAGuestPtr ptr;
+
+ /*
+ * A note on interpretation of pitch: This value of pitch is the
+ * number of bytes between vertically adjacent image
+ * blocks. Normally this is the number of bytes between the first
+ * pixel of two adjacent scanlines. With compressed textures,
+ * however, this may represent the number of bytes between
+ * compression blocks rather than between rows of pixels.
+ *
+ * XXX: Compressed textures currently must be tightly packed in guest memory.
+ *
+ * If the image is 1-dimensional, pitch is ignored.
+ *
+ * If 'pitch' is zero, the SVGA3D device calculates a pitch value
+ * assuming each row of blocks is tightly packed.
+ */
+ uint32 pitch;
+} SVGAGuestImage;
+
/*
* SVGAColorBGRX --
*
@@ -328,7 +361,7 @@
uint32 b : 8;
uint32 g : 8;
uint32 r : 8;
- uint32 x : 8; // Unused
+ uint32 x : 8; /* Unused */
};
uint32 value;
@@ -370,23 +403,34 @@
* Note the holes in the bitfield. Missing bits have been deprecated,
* and must not be reused. Those capabilities will never be reported
* by new versions of the SVGA device.
+ *
+ * SVGA_CAP_GMR2 --
+ * Provides asynchronous commands to define and remap guest memory
+ * regions. Adds device registers SVGA_REG_GMRS_MAX_PAGES and
+ * SVGA_REG_MEMORY_SIZE.
+ *
+ * SVGA_CAP_SCREEN_OBJECT_2 --
+ * Allow screen object support, and require backing stores from the
+ * guest for each screen object.
*/
#define SVGA_CAP_NONE 0x00000000
#define SVGA_CAP_RECT_COPY 0x00000002
#define SVGA_CAP_CURSOR 0x00000020
-#define SVGA_CAP_CURSOR_BYPASS 0x00000040 // Legacy (Use Cursor Bypass 3 instead)
-#define SVGA_CAP_CURSOR_BYPASS_2 0x00000080 // Legacy (Use Cursor Bypass 3 instead)
+#define SVGA_CAP_CURSOR_BYPASS 0x00000040 /* Legacy (Use Cursor Bypass 3 instead) */
+#define SVGA_CAP_CURSOR_BYPASS_2 0x00000080 /* Legacy (Use Cursor Bypass 3 instead) */
#define SVGA_CAP_8BIT_EMULATION 0x00000100
#define SVGA_CAP_ALPHA_CURSOR 0x00000200
#define SVGA_CAP_3D 0x00004000
#define SVGA_CAP_EXTENDED_FIFO 0x00008000
-#define SVGA_CAP_MULTIMON 0x00010000 // Legacy multi-monitor support
+#define SVGA_CAP_MULTIMON 0x00010000 /* Legacy multi-monitor support */
#define SVGA_CAP_PITCHLOCK 0x00020000
#define SVGA_CAP_IRQMASK 0x00040000
-#define SVGA_CAP_DISPLAY_TOPOLOGY 0x00080000 // Legacy multi-monitor support
+#define SVGA_CAP_DISPLAY_TOPOLOGY 0x00080000 /* Legacy multi-monitor support */
#define SVGA_CAP_GMR 0x00100000
#define SVGA_CAP_TRACES 0x00200000
+#define SVGA_CAP_GMR2 0x00400000
+#define SVGA_CAP_SCREEN_OBJECT_2 0x00800000
/*
@@ -431,7 +475,7 @@
SVGA_FIFO_CAPABILITIES = 4,
SVGA_FIFO_FLAGS,
- // Valid with SVGA_FIFO_CAP_FENCE:
+ /* Valid with SVGA_FIFO_CAP_FENCE: */
SVGA_FIFO_FENCE,
/*
@@ -444,33 +488,47 @@
* extended FIFO.
*/
- // Valid if exists (i.e. if extended FIFO enabled):
+ /* Valid if exists (i.e. if extended FIFO enabled): */
SVGA_FIFO_3D_HWVERSION, /* See SVGA3dHardwareVersion in svga3d_reg.h */
- // Valid with SVGA_FIFO_CAP_PITCHLOCK:
+ /* Valid with SVGA_FIFO_CAP_PITCHLOCK: */
SVGA_FIFO_PITCHLOCK,
- // Valid with SVGA_FIFO_CAP_CURSOR_BYPASS_3:
+ /* Valid with SVGA_FIFO_CAP_CURSOR_BYPASS_3: */
SVGA_FIFO_CURSOR_ON, /* Cursor bypass 3 show/hide register */
SVGA_FIFO_CURSOR_X, /* Cursor bypass 3 x register */
SVGA_FIFO_CURSOR_Y, /* Cursor bypass 3 y register */
SVGA_FIFO_CURSOR_COUNT, /* Incremented when any of the other 3 change */
SVGA_FIFO_CURSOR_LAST_UPDATED,/* Last time the host updated the cursor */
- // Valid with SVGA_FIFO_CAP_RESERVE:
+ /* Valid with SVGA_FIFO_CAP_RESERVE: */
SVGA_FIFO_RESERVED, /* Bytes past NEXT_CMD with real contents */
/*
- * Valid with SVGA_FIFO_CAP_SCREEN_OBJECT:
+ * Valid with SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2:
*
* By default this is SVGA_ID_INVALID, to indicate that the cursor
* coordinates are specified relative to the virtual root. If this
* is set to a specific screen ID, cursor position is reinterpreted
- * as a signed offset relative to that screen's origin. This is the
- * only way to place the cursor on a non-rooted screen.
+ * as a signed offset relative to that screen's origin.
*/
SVGA_FIFO_CURSOR_SCREEN_ID,
/*
+ * Valid with SVGA_FIFO_CAP_DEAD
+ *
+ * An arbitrary value written by the host, drivers should not use it.
+ */
+ SVGA_FIFO_DEAD,
+
+ /*
+ * Valid with SVGA_FIFO_CAP_3D_HWVERSION_REVISED:
+ *
+ * Contains 3D HWVERSION (see SVGA3dHardwareVersion in svga3d_reg.h)
+ * on platforms that can enforce graphics resource limits.
+ */
+ SVGA_FIFO_3D_HWVERSION_REVISED,
+
+ /*
* XXX: The gap here, up until SVGA_FIFO_3D_CAPS, can be used for new
* registers, but this must be done carefully and with judicious use of
* capability bits, since comparisons based on SVGA_FIFO_MIN aren't
@@ -508,7 +566,7 @@
* sets SVGA_FIFO_MIN high enough to leave room for them.
*/
- // Valid if register exists:
+ /* Valid if register exists: */
SVGA_FIFO_GUEST_3D_HWVERSION, /* Guest driver's 3D version */
SVGA_FIFO_FENCE_GOAL, /* Matching target for SVGA_IRQFLAG_FENCE_GOAL */
SVGA_FIFO_BUSY, /* See "FIFO Synchronization Registers" */
@@ -709,6 +767,37 @@
*
* - When a screen is resized, either using Screen Object commands or
* legacy multimon registers, its contents are preserved.
+ *
+ * SVGA_FIFO_CAP_GMR2 --
+ *
+ * Provides new commands to define and remap guest memory regions (GMR).
+ *
+ * New 2D commands:
+ * DEFINE_GMR2, REMAP_GMR2.
+ *
+ * SVGA_FIFO_CAP_3D_HWVERSION_REVISED --
+ *
+ * Indicates new register SVGA_FIFO_3D_HWVERSION_REVISED exists.
+ * This register may replace SVGA_FIFO_3D_HWVERSION on platforms
+ * that enforce graphics resource limits. This allows the platform
+ * to clear SVGA_FIFO_3D_HWVERSION and disable 3D in legacy guest
+ * drivers that do not limit their resources.
+ *
+ * Note this is an alias to SVGA_FIFO_CAP_GMR2 because these indicators
+ * are codependent (and thus we use a single capability bit).
+ *
+ * SVGA_FIFO_CAP_SCREEN_OBJECT_2 --
+ *
+ * Modifies the DEFINE_SCREEN command to include a guest provided
+ * backing store in GMR memory and the bytesPerLine for the backing
+ * store. This capability requires the use of a backing store when
+ * creating screen objects. However if SVGA_FIFO_CAP_SCREEN_OBJECT
+ * is present then backing stores are optional.
+ *
+ * SVGA_FIFO_CAP_DEAD --
+ *
+ * Drivers should not use this cap bit. This cap bit can not be
+ * reused since some hosts already expose it.
*/
#define SVGA_FIFO_CAP_NONE 0
@@ -720,6 +809,10 @@
#define SVGA_FIFO_CAP_ESCAPE (1<<5)
#define SVGA_FIFO_CAP_RESERVE (1<<6)
#define SVGA_FIFO_CAP_SCREEN_OBJECT (1<<7)
+#define SVGA_FIFO_CAP_GMR2 (1<<8)
+#define SVGA_FIFO_CAP_3D_HWVERSION_REVISED SVGA_FIFO_CAP_GMR2
+#define SVGA_FIFO_CAP_SCREEN_OBJECT_2 (1<<9)
+#define SVGA_FIFO_CAP_DEAD (1<<10)
/*
@@ -730,7 +823,7 @@
#define SVGA_FIFO_FLAG_NONE 0
#define SVGA_FIFO_FLAG_ACCELFRONT (1<<0)
-#define SVGA_FIFO_FLAG_RESERVED (1<<31) // Internal use only
+#define SVGA_FIFO_FLAG_RESERVED (1<<31) /* Internal use only */
/*
* FIFO reservation sentinel value
@@ -763,22 +856,22 @@
SVGA_VIDEO_DATA_OFFSET,
SVGA_VIDEO_FORMAT,
SVGA_VIDEO_COLORKEY,
- SVGA_VIDEO_SIZE, // Deprecated
+ SVGA_VIDEO_SIZE, /* Deprecated */
SVGA_VIDEO_WIDTH,
SVGA_VIDEO_HEIGHT,
SVGA_VIDEO_SRC_X,
SVGA_VIDEO_SRC_Y,
SVGA_VIDEO_SRC_WIDTH,
SVGA_VIDEO_SRC_HEIGHT,
- SVGA_VIDEO_DST_X, // Signed int32
- SVGA_VIDEO_DST_Y, // Signed int32
+ SVGA_VIDEO_DST_X, /* Signed int32 */
+ SVGA_VIDEO_DST_Y, /* Signed int32 */
SVGA_VIDEO_DST_WIDTH,
SVGA_VIDEO_DST_HEIGHT,
SVGA_VIDEO_PITCH_1,
SVGA_VIDEO_PITCH_2,
SVGA_VIDEO_PITCH_3,
- SVGA_VIDEO_DATA_GMRID, // Optional, defaults to SVGA_GMR_FRAMEBUFFER
- SVGA_VIDEO_DST_SCREEN_ID, // Optional, defaults to virtual coords (SVGA_ID_INVALID)
+ SVGA_VIDEO_DATA_GMRID, /* Optional, defaults to SVGA_GMR_FRAMEBUFFER */
+ SVGA_VIDEO_DST_SCREEN_ID, /* Optional, defaults to virtual coords (SVGA_ID_INVALID) */
SVGA_VIDEO_NUM_REGS
};
@@ -829,15 +922,51 @@
* compatibility. New flags can be added, and the struct may grow,
* but existing fields must retain their meaning.
*
+ * Added with SVGA_FIFO_CAP_SCREEN_OBJECT_2 are required fields of
+ * a SVGAGuestPtr that is used to back the screen contents. This
+ * memory must come from the GFB. The guest is not allowed to
+ * access the memory and doing so will have undefined results. The
+ * backing store is required to be page aligned and the size is
+ * padded to the next page boundry. The number of pages is:
+ * (bytesPerLine * size.width * 4 + PAGE_SIZE - 1) / PAGE_SIZE
+ *
+ * The pitch in the backingStore is required to be at least large
+ * enough to hold a 32bbp scanline. It is recommended that the
+ * driver pad bytesPerLine for a potential performance win.
+ *
+ * The cloneCount field is treated as a hint from the guest that
+ * the user wants this display to be cloned, countCount times. A
+ * value of zero means no cloning should happen.
*/
-#define SVGA_SCREEN_HAS_ROOT (1 << 0) // Screen is present in the virtual coord space
-#define SVGA_SCREEN_IS_PRIMARY (1 << 1) // Guest considers this screen to be 'primary'
-#define SVGA_SCREEN_FULLSCREEN_HINT (1 << 2) // Guest is running a fullscreen app here
+#define SVGA_SCREEN_MUST_BE_SET (1 << 0) /* Must be set or results undefined */
+#define SVGA_SCREEN_HAS_ROOT SVGA_SCREEN_MUST_BE_SET /* Deprecated */
+#define SVGA_SCREEN_IS_PRIMARY (1 << 1) /* Guest considers this screen to be 'primary' */
+#define SVGA_SCREEN_FULLSCREEN_HINT (1 << 2) /* Guest is running a fullscreen app here */
+
+/*
+ * Added with SVGA_FIFO_CAP_SCREEN_OBJECT_2. When the screen is
+ * deactivated the base layer is defined to lose all contents and
+ * become black. When a screen is deactivated the backing store is
+ * optional. When set backingPtr and bytesPerLine will be ignored.
+ */
+#define SVGA_SCREEN_DEACTIVATE (1 << 3)
+
+/*
+ * Added with SVGA_FIFO_CAP_SCREEN_OBJECT_2. When this flag is set
+ * the screen contents will be outputted as all black to the user
+ * though the base layer contents is preserved. The screen base layer
+ * can still be read and written to like normal though the no visible
+ * effect will be seen by the user. When the flag is changed the
+ * screen will be blanked or redrawn to the current contents as needed
+ * without any extra commands from the driver. This flag only has an
+ * effect when the screen is not deactivated.
+ */
+#define SVGA_SCREEN_BLANKING (1 << 4)
typedef
struct SVGAScreenObject {
- uint32 structSize; // sizeof(SVGAScreenObject)
+ uint32 structSize; /* sizeof(SVGAScreenObject) */
uint32 id;
uint32 flags;
struct {
@@ -847,7 +976,14 @@
struct {
int32 x;
int32 y;
- } root; // Only used if SVGA_SCREEN_HAS_ROOT is set.
+ } root;
+
+ /*
+ * Added and required by SVGA_FIFO_CAP_SCREEN_OBJECT_2, optional
+ * with SVGA_FIFO_CAP_SCREEN_OBJECT.
+ */
+ SVGAGuestImage backingStore;
+ uint32 cloneCount;
} SVGAScreenObject;
@@ -885,6 +1021,8 @@
SVGA_CMD_BLIT_SCREEN_TO_GMRFB = 38,
SVGA_CMD_ANNOTATION_FILL = 39,
SVGA_CMD_ANNOTATION_COPY = 40,
+ SVGA_CMD_DEFINE_GMR2 = 41,
+ SVGA_CMD_REMAP_GMR2 = 42,
SVGA_CMD_MAX
} SVGAFifoCmdId;
@@ -920,7 +1058,7 @@
*/
typedef
-struct {
+struct SVGAFifoCmdUpdate {
uint32 x;
uint32 y;
uint32 width;
@@ -939,7 +1077,7 @@
*/
typedef
-struct {
+struct SVGAFifoCmdRectCopy {
uint32 srcX;
uint32 srcY;
uint32 destX;
@@ -963,14 +1101,14 @@
*/
typedef
-struct {
- uint32 id; // Reserved, must be zero.
+struct SVGAFifoCmdDefineCursor {
+ uint32 id; /* Reserved, must be zero. */
uint32 hotspotX;
uint32 hotspotY;
uint32 width;
uint32 height;
- uint32 andMaskDepth; // Value must be 1 or equal to BITS_PER_PIXEL
- uint32 xorMaskDepth; // Value must be 1 or equal to BITS_PER_PIXEL
+ uint32 andMaskDepth; /* Value must be 1 or equal to BITS_PER_PIXEL */
+ uint32 xorMaskDepth; /* Value must be 1 or equal to BITS_PER_PIXEL */
/*
* Followed by scanline data for AND mask, then XOR mask.
* Each scanline is padded to a 32-bit boundary.
@@ -992,8 +1130,8 @@
*/
typedef
-struct {
- uint32 id; // Reserved, must be zero.
+struct SVGAFifoCmdDefineAlphaCursor {
+ uint32 id; /* Reserved, must be zero. */
uint32 hotspotX;
uint32 hotspotY;
uint32 width;
@@ -1015,7 +1153,7 @@
*/
typedef
-struct {
+struct SVGAFifoCmdUpdateVerbose {
uint32 x;
uint32 y;
uint32 width;
@@ -1040,13 +1178,13 @@
#define SVGA_ROP_COPY 0x03
typedef
-struct {
- uint32 color; // In the same format as the GFB
+struct SVGAFifoCmdFrontRopFill {
+ uint32 color; /* In the same format as the GFB */
uint32 x;
uint32 y;
uint32 width;
uint32 height;
- uint32 rop; // Must be SVGA_ROP_COPY
+ uint32 rop; /* Must be SVGA_ROP_COPY */
} SVGAFifoCmdFrontRopFill;
@@ -1083,7 +1221,7 @@
*/
typedef
-struct {
+struct SVGAFifoCmdEscape {
uint32 nsid;
uint32 size;
/* followed by 'size' bytes of data */
@@ -1113,12 +1251,12 @@
* registers (SVGA_REG_NUM_GUEST_DISPLAYS, SVGA_REG_DISPLAY_*).
*
* Availability:
- * SVGA_FIFO_CAP_SCREEN_OBJECT
+ * SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
*/
typedef
struct {
- SVGAScreenObject screen; // Variable-length according to version
+ SVGAScreenObject screen; /* Variable-length according to version */
} SVGAFifoCmdDefineScreen;
@@ -1129,7 +1267,7 @@
* re-use.
*
* Availability:
- * SVGA_FIFO_CAP_SCREEN_OBJECT
+ * SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
*/
typedef
@@ -1182,7 +1320,7 @@
* GMRFB.
*
* Availability:
- * SVGA_FIFO_CAP_SCREEN_OBJECT
+ * SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
*/
typedef
@@ -1219,7 +1357,7 @@
* SVGA_CMD_ANNOTATION_* commands for details.
*
* Availability:
- * SVGA_FIFO_CAP_SCREEN_OBJECT
+ * SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
*/
typedef
@@ -1267,7 +1405,7 @@
* the time any subsequent FENCE commands are reached.
*
* Availability:
- * SVGA_FIFO_CAP_SCREEN_OBJECT
+ * SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
*/
typedef
@@ -1302,7 +1440,7 @@
* user's display is being remoted over a network connection.
*
* Availability:
- * SVGA_FIFO_CAP_SCREEN_OBJECT
+ * SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
*/
typedef
@@ -1334,7 +1472,7 @@
* undefined.
*
* Availability:
- * SVGA_FIFO_CAP_SCREEN_OBJECT
+ * SVGA_FIFO_CAP_SCREEN_OBJECT or SVGA_FIFO_CAP_SCREEN_OBJECT_2
*/
typedef
@@ -1343,4 +1481,72 @@
uint32 srcScreenId;
} SVGAFifoCmdAnnotationCopy;
+
+/*
+ * SVGA_CMD_DEFINE_GMR2 --
+ *
+ * Define guest memory region v2. See the description of GMRs above.
+ *
+ * Availability:
+ * SVGA_CAP_GMR2
+ */
+
+typedef
+struct {
+ uint32 gmrId;
+ uint32 numPages;
+} SVGAFifoCmdDefineGMR2;
+
+
+/*
+ * SVGA_CMD_REMAP_GMR2 --
+ *
+ * Remap guest memory region v2. See the description of GMRs above.
+ *
+ * This command allows guest to modify a portion of an existing GMR by
+ * invalidating it or reassigning it to different guest physical pages.
+ * The pages are identified by physical page number (PPN). The pages
+ * are assumed to be pinned and valid for DMA operations.
+ *
+ * Description of command flags:
+ *
+ * SVGA_REMAP_GMR2_VIA_GMR: If enabled, references a PPN list in a GMR.
+ * The PPN list must not overlap with the remap region (this can be
+ * handled trivially by referencing a separate GMR). If flag is
+ * disabled, PPN list is appended to SVGARemapGMR command.
+ *
+ * SVGA_REMAP_GMR2_PPN64: If set, PPN list is in PPN64 format, otherwise
+ * it is in PPN32 format.
+ *
+ * SVGA_REMAP_GMR2_SINGLE_PPN: If set, PPN list contains a single entry.
+ * A single PPN can be used to invalidate a portion of a GMR or
+ * map it to to a single guest scratch page.
+ *
+ * Availability:
+ * SVGA_CAP_GMR2
+ */
+
+typedef enum {
+ SVGA_REMAP_GMR2_PPN32 = 0,
+ SVGA_REMAP_GMR2_VIA_GMR = (1 << 0),
+ SVGA_REMAP_GMR2_PPN64 = (1 << 1),
+ SVGA_REMAP_GMR2_SINGLE_PPN = (1 << 2),
+} SVGARemapGMR2Flags;
+
+typedef
+struct {
+ uint32 gmrId;
+ SVGARemapGMR2Flags flags;
+ uint32 offsetPages; /* offset in pages to begin remap */
+ uint32 numPages; /* number of pages to remap */
+ /*
+ * Followed by additional data depending on SVGARemapGMR2Flags.
+ *
+ * If flag SVGA_REMAP_GMR2_VIA_GMR is set, single SVGAGuestPtr follows.
+ * Otherwise an array of page descriptors in PPN32 or PPN64 format
+ * (according to flag SVGA_REMAP_GMR2_PPN64) follows. If flag
+ * SVGA_REMAP_GMR2_SINGLE_PPN is set, array contains a single entry.
+ */
+} SVGAFifoCmdRemapGMR2;
+
#endif
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
index 87e43e0..5a72ed9 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
@@ -42,6 +42,10 @@
static uint32_t gmr_placement_flags = VMW_PL_FLAG_GMR |
TTM_PL_FLAG_CACHED;
+static uint32_t gmr_ne_placement_flags = VMW_PL_FLAG_GMR |
+ TTM_PL_FLAG_CACHED |
+ TTM_PL_FLAG_NO_EVICT;
+
struct ttm_placement vmw_vram_placement = {
.fpfn = 0,
.lpfn = 0,
@@ -56,6 +60,11 @@
VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED
};
+static uint32_t gmr_vram_placement_flags[] = {
+ VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED,
+ TTM_PL_FLAG_VRAM | TTM_PL_FLAG_CACHED
+};
+
struct ttm_placement vmw_vram_gmr_placement = {
.fpfn = 0,
.lpfn = 0,
@@ -65,6 +74,20 @@
.busy_placement = &gmr_placement_flags
};
+static uint32_t vram_gmr_ne_placement_flags[] = {
+ TTM_PL_FLAG_VRAM | TTM_PL_FLAG_CACHED | TTM_PL_FLAG_NO_EVICT,
+ VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED | TTM_PL_FLAG_NO_EVICT
+};
+
+struct ttm_placement vmw_vram_gmr_ne_placement = {
+ .fpfn = 0,
+ .lpfn = 0,
+ .num_placement = 2,
+ .placement = vram_gmr_ne_placement_flags,
+ .num_busy_placement = 1,
+ .busy_placement = &gmr_ne_placement_flags
+};
+
struct ttm_placement vmw_vram_sys_placement = {
.fpfn = 0,
.lpfn = 0,
@@ -92,6 +115,30 @@
.busy_placement = &sys_placement_flags
};
+static uint32_t evictable_placement_flags[] = {
+ TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED,
+ TTM_PL_FLAG_VRAM | TTM_PL_FLAG_CACHED,
+ VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED
+};
+
+struct ttm_placement vmw_evictable_placement = {
+ .fpfn = 0,
+ .lpfn = 0,
+ .num_placement = 3,
+ .placement = evictable_placement_flags,
+ .num_busy_placement = 1,
+ .busy_placement = &sys_placement_flags
+};
+
+struct ttm_placement vmw_srf_placement = {
+ .fpfn = 0,
+ .lpfn = 0,
+ .num_placement = 1,
+ .num_busy_placement = 2,
+ .placement = &gmr_placement_flags,
+ .busy_placement = gmr_vram_placement_flags
+};
+
struct vmw_ttm_backend {
struct ttm_backend backend;
struct page **pages;
@@ -274,39 +321,39 @@
static void *vmw_sync_obj_ref(void *sync_obj)
{
- return sync_obj;
+
+ return (void *)
+ vmw_fence_obj_reference((struct vmw_fence_obj *) sync_obj);
}
static void vmw_sync_obj_unref(void **sync_obj)
{
- *sync_obj = NULL;
+ vmw_fence_obj_unreference((struct vmw_fence_obj **) sync_obj);
}
static int vmw_sync_obj_flush(void *sync_obj, void *sync_arg)
{
- struct vmw_private *dev_priv = (struct vmw_private *)sync_arg;
-
- mutex_lock(&dev_priv->hw_mutex);
- vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
- mutex_unlock(&dev_priv->hw_mutex);
+ vmw_fence_obj_flush((struct vmw_fence_obj *) sync_obj);
return 0;
}
static bool vmw_sync_obj_signaled(void *sync_obj, void *sync_arg)
{
- struct vmw_private *dev_priv = (struct vmw_private *)sync_arg;
- uint32_t sequence = (unsigned long) sync_obj;
+ unsigned long flags = (unsigned long) sync_arg;
+ return vmw_fence_obj_signaled((struct vmw_fence_obj *) sync_obj,
+ (uint32_t) flags);
- return vmw_fence_signaled(dev_priv, sequence);
}
static int vmw_sync_obj_wait(void *sync_obj, void *sync_arg,
bool lazy, bool interruptible)
{
- struct vmw_private *dev_priv = (struct vmw_private *)sync_arg;
- uint32_t sequence = (unsigned long) sync_obj;
+ unsigned long flags = (unsigned long) sync_arg;
- return vmw_wait_fence(dev_priv, false, sequence, false, 3*HZ);
+ return vmw_fence_obj_wait((struct vmw_fence_obj *) sync_obj,
+ (uint32_t) flags,
+ lazy, interruptible,
+ VMW_FENCE_WAIT_TIMEOUT);
}
struct ttm_bo_driver vmw_bo_driver = {
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c
new file mode 100644
index 0000000..3fa884d
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c
@@ -0,0 +1,322 @@
+/**************************************************************************
+ *
+ * Copyright © 2011 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#include "ttm/ttm_placement.h"
+
+#include "drmP.h"
+#include "vmwgfx_drv.h"
+
+
+/**
+ * vmw_dmabuf_to_placement - Validate a buffer to placement.
+ *
+ * @dev_priv: Driver private.
+ * @buf: DMA buffer to move.
+ * @pin: Pin buffer if true.
+ * @interruptible: Use interruptible wait.
+ *
+ * May only be called by the current master since it assumes that the
+ * master lock is the current master's lock.
+ * This function takes the master's lock in write mode.
+ * Flushes and unpins the query bo to avoid failures.
+ *
+ * Returns
+ * -ERESTARTSYS if interrupted by a signal.
+ */
+int vmw_dmabuf_to_placement(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ struct ttm_placement *placement,
+ bool interruptible)
+{
+ struct vmw_master *vmaster = dev_priv->active_master;
+ struct ttm_buffer_object *bo = &buf->base;
+ int ret;
+
+ ret = ttm_write_lock(&vmaster->lock, interruptible);
+ if (unlikely(ret != 0))
+ return ret;
+
+ vmw_execbuf_release_pinned_bo(dev_priv, false, 0);
+
+ ret = ttm_bo_reserve(bo, interruptible, false, false, 0);
+ if (unlikely(ret != 0))
+ goto err;
+
+ ret = ttm_bo_validate(bo, placement, interruptible, false, false);
+
+ ttm_bo_unreserve(bo);
+
+err:
+ ttm_write_unlock(&vmaster->lock);
+ return ret;
+}
+
+/**
+ * vmw_dmabuf_to_vram_or_gmr - Move a buffer to vram or gmr.
+ *
+ * May only be called by the current master since it assumes that the
+ * master lock is the current master's lock.
+ * This function takes the master's lock in write mode.
+ * Flushes and unpins the query bo if @pin == true to avoid failures.
+ *
+ * @dev_priv: Driver private.
+ * @buf: DMA buffer to move.
+ * @pin: Pin buffer if true.
+ * @interruptible: Use interruptible wait.
+ *
+ * Returns
+ * -ERESTARTSYS if interrupted by a signal.
+ */
+int vmw_dmabuf_to_vram_or_gmr(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ bool pin, bool interruptible)
+{
+ struct vmw_master *vmaster = dev_priv->active_master;
+ struct ttm_buffer_object *bo = &buf->base;
+ struct ttm_placement *placement;
+ int ret;
+
+ ret = ttm_write_lock(&vmaster->lock, interruptible);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (pin)
+ vmw_execbuf_release_pinned_bo(dev_priv, false, 0);
+
+ ret = ttm_bo_reserve(bo, interruptible, false, false, 0);
+ if (unlikely(ret != 0))
+ goto err;
+
+ /**
+ * Put BO in VRAM if there is space, otherwise as a GMR.
+ * If there is no space in VRAM and GMR ids are all used up,
+ * start evicting GMRs to make room. If the DMA buffer can't be
+ * used as a GMR, this will return -ENOMEM.
+ */
+
+ if (pin)
+ placement = &vmw_vram_gmr_ne_placement;
+ else
+ placement = &vmw_vram_gmr_placement;
+
+ ret = ttm_bo_validate(bo, placement, interruptible, false, false);
+ if (likely(ret == 0) || ret == -ERESTARTSYS)
+ goto err_unreserve;
+
+
+ /**
+ * If that failed, try VRAM again, this time evicting
+ * previous contents.
+ */
+
+ if (pin)
+ placement = &vmw_vram_ne_placement;
+ else
+ placement = &vmw_vram_placement;
+
+ ret = ttm_bo_validate(bo, placement, interruptible, false, false);
+
+err_unreserve:
+ ttm_bo_unreserve(bo);
+err:
+ ttm_write_unlock(&vmaster->lock);
+ return ret;
+}
+
+/**
+ * vmw_dmabuf_to_vram - Move a buffer to vram.
+ *
+ * May only be called by the current master since it assumes that the
+ * master lock is the current master's lock.
+ * This function takes the master's lock in write mode.
+ *
+ * @dev_priv: Driver private.
+ * @buf: DMA buffer to move.
+ * @pin: Pin buffer in vram if true.
+ * @interruptible: Use interruptible wait.
+ *
+ * Returns
+ * -ERESTARTSYS if interrupted by a signal.
+ */
+int vmw_dmabuf_to_vram(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ bool pin, bool interruptible)
+{
+ struct ttm_placement *placement;
+
+ if (pin)
+ placement = &vmw_vram_ne_placement;
+ else
+ placement = &vmw_vram_placement;
+
+ return vmw_dmabuf_to_placement(dev_priv, buf,
+ placement,
+ interruptible);
+}
+
+/**
+ * vmw_dmabuf_to_start_of_vram - Move a buffer to start of vram.
+ *
+ * May only be called by the current master since it assumes that the
+ * master lock is the current master's lock.
+ * This function takes the master's lock in write mode.
+ * Flushes and unpins the query bo if @pin == true to avoid failures.
+ *
+ * @dev_priv: Driver private.
+ * @buf: DMA buffer to move.
+ * @pin: Pin buffer in vram if true.
+ * @interruptible: Use interruptible wait.
+ *
+ * Returns
+ * -ERESTARTSYS if interrupted by a signal.
+ */
+int vmw_dmabuf_to_start_of_vram(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ bool pin, bool interruptible)
+{
+ struct vmw_master *vmaster = dev_priv->active_master;
+ struct ttm_buffer_object *bo = &buf->base;
+ struct ttm_placement placement;
+ int ret = 0;
+
+ if (pin)
+ placement = vmw_vram_ne_placement;
+ else
+ placement = vmw_vram_placement;
+ placement.lpfn = bo->num_pages;
+
+ ret = ttm_write_lock(&vmaster->lock, interruptible);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (pin)
+ vmw_execbuf_release_pinned_bo(dev_priv, false, 0);
+
+ ret = ttm_bo_reserve(bo, interruptible, false, false, 0);
+ if (unlikely(ret != 0))
+ goto err_unlock;
+
+ /* Is this buffer already in vram but not at the start of it? */
+ if (bo->mem.mem_type == TTM_PL_VRAM &&
+ bo->mem.start < bo->num_pages &&
+ bo->mem.start > 0)
+ (void) ttm_bo_validate(bo, &vmw_sys_placement, false,
+ false, false);
+
+ ret = ttm_bo_validate(bo, &placement, interruptible, false, false);
+
+ /* For some reason we didn't up at the start of vram */
+ WARN_ON(ret == 0 && bo->offset != 0);
+
+ ttm_bo_unreserve(bo);
+err_unlock:
+ ttm_write_unlock(&vmaster->lock);
+
+ return ret;
+}
+
+
+/**
+ * vmw_dmabuf_upin - Unpin the buffer given buffer, does not move the buffer.
+ *
+ * May only be called by the current master since it assumes that the
+ * master lock is the current master's lock.
+ * This function takes the master's lock in write mode.
+ *
+ * @dev_priv: Driver private.
+ * @buf: DMA buffer to unpin.
+ * @interruptible: Use interruptible wait.
+ *
+ * Returns
+ * -ERESTARTSYS if interrupted by a signal.
+ */
+int vmw_dmabuf_unpin(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ bool interruptible)
+{
+ /*
+ * We could in theory early out if the buffer is
+ * unpinned but we need to lock and reserve the buffer
+ * anyways so we don't gain much by that.
+ */
+ return vmw_dmabuf_to_placement(dev_priv, buf,
+ &vmw_evictable_placement,
+ interruptible);
+}
+
+
+/**
+ * vmw_bo_get_guest_ptr - Get the guest ptr representing the current placement
+ * of a buffer.
+ *
+ * @bo: Pointer to a struct ttm_buffer_object. Must be pinned or reserved.
+ * @ptr: SVGAGuestPtr returning the result.
+ */
+void vmw_bo_get_guest_ptr(const struct ttm_buffer_object *bo,
+ SVGAGuestPtr *ptr)
+{
+ if (bo->mem.mem_type == TTM_PL_VRAM) {
+ ptr->gmrId = SVGA_GMR_FRAMEBUFFER;
+ ptr->offset = bo->offset;
+ } else {
+ ptr->gmrId = bo->mem.start;
+ ptr->offset = 0;
+ }
+}
+
+
+/**
+ * vmw_bo_pin - Pin or unpin a buffer object without moving it.
+ *
+ * @bo: The buffer object. Must be reserved, and present either in VRAM
+ * or GMR memory.
+ * @pin: Whether to pin or unpin.
+ *
+ */
+void vmw_bo_pin(struct ttm_buffer_object *bo, bool pin)
+{
+ uint32_t pl_flags;
+ struct ttm_placement placement;
+ uint32_t old_mem_type = bo->mem.mem_type;
+ int ret;
+
+ BUG_ON(!atomic_read(&bo->reserved));
+ BUG_ON(old_mem_type != TTM_PL_VRAM &&
+ old_mem_type != VMW_PL_FLAG_GMR);
+
+ pl_flags = TTM_PL_FLAG_VRAM | VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED;
+ if (pin)
+ pl_flags |= TTM_PL_FLAG_NO_EVICT;
+
+ memset(&placement, 0, sizeof(placement));
+ placement.num_placement = 1;
+ placement.placement = &pl_flags;
+
+ ret = ttm_bo_validate(bo, &placement, false, true, true);
+
+ BUG_ON(ret != 0 || bo->mem.mem_type != old_mem_type);
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 96949b9..13afddc 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -82,16 +82,27 @@
#define DRM_IOCTL_VMW_EXECBUF \
DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_EXECBUF, \
struct drm_vmw_execbuf_arg)
-#define DRM_IOCTL_VMW_FIFO_DEBUG \
- DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_FIFO_DEBUG, \
- struct drm_vmw_fifo_debug_arg)
+#define DRM_IOCTL_VMW_GET_3D_CAP \
+ DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_GET_3D_CAP, \
+ struct drm_vmw_get_3d_cap_arg)
#define DRM_IOCTL_VMW_FENCE_WAIT \
DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_FENCE_WAIT, \
struct drm_vmw_fence_wait_arg)
-#define DRM_IOCTL_VMW_UPDATE_LAYOUT \
- DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_UPDATE_LAYOUT, \
- struct drm_vmw_update_layout_arg)
-
+#define DRM_IOCTL_VMW_FENCE_SIGNALED \
+ DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_FENCE_SIGNALED, \
+ struct drm_vmw_fence_signaled_arg)
+#define DRM_IOCTL_VMW_FENCE_UNREF \
+ DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_FENCE_UNREF, \
+ struct drm_vmw_fence_arg)
+#define DRM_IOCTL_VMW_FENCE_EVENT \
+ DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_FENCE_EVENT, \
+ struct drm_vmw_fence_event_arg)
+#define DRM_IOCTL_VMW_PRESENT \
+ DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_PRESENT, \
+ struct drm_vmw_present_arg)
+#define DRM_IOCTL_VMW_PRESENT_READBACK \
+ DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_PRESENT_READBACK, \
+ struct drm_vmw_present_readback_arg)
/**
* The core DRM version of this macro doesn't account for
@@ -135,12 +146,25 @@
DRM_AUTH | DRM_UNLOCKED),
VMW_IOCTL_DEF(VMW_EXECBUF, vmw_execbuf_ioctl,
DRM_AUTH | DRM_UNLOCKED),
- VMW_IOCTL_DEF(VMW_FIFO_DEBUG, vmw_fifo_debug_ioctl,
- DRM_AUTH | DRM_ROOT_ONLY | DRM_MASTER | DRM_UNLOCKED),
- VMW_IOCTL_DEF(VMW_FENCE_WAIT, vmw_fence_wait_ioctl,
+ VMW_IOCTL_DEF(VMW_FENCE_WAIT, vmw_fence_obj_wait_ioctl,
DRM_AUTH | DRM_UNLOCKED),
- VMW_IOCTL_DEF(VMW_UPDATE_LAYOUT, vmw_kms_update_layout_ioctl,
- DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED)
+ VMW_IOCTL_DEF(VMW_FENCE_SIGNALED,
+ vmw_fence_obj_signaled_ioctl,
+ DRM_AUTH | DRM_UNLOCKED),
+ VMW_IOCTL_DEF(VMW_FENCE_UNREF, vmw_fence_obj_unref_ioctl,
+ DRM_AUTH | DRM_UNLOCKED),
+ VMW_IOCTL_DEF(VMW_FENCE_EVENT,
+ vmw_fence_event_ioctl,
+ DRM_AUTH | DRM_UNLOCKED),
+ VMW_IOCTL_DEF(VMW_GET_3D_CAP, vmw_get_cap_3d_ioctl,
+ DRM_AUTH | DRM_UNLOCKED),
+
+ /* these allow direct access to the framebuffers mark as master only */
+ VMW_IOCTL_DEF(VMW_PRESENT, vmw_present_ioctl,
+ DRM_MASTER | DRM_AUTH | DRM_UNLOCKED),
+ VMW_IOCTL_DEF(VMW_PRESENT_READBACK,
+ vmw_present_readback_ioctl,
+ DRM_MASTER | DRM_AUTH | DRM_UNLOCKED),
};
static struct pci_device_id vmw_pci_id_list[] = {
@@ -189,8 +213,78 @@
DRM_INFO(" GMR.\n");
if (capabilities & SVGA_CAP_TRACES)
DRM_INFO(" Traces.\n");
+ if (capabilities & SVGA_CAP_GMR2)
+ DRM_INFO(" GMR2.\n");
+ if (capabilities & SVGA_CAP_SCREEN_OBJECT_2)
+ DRM_INFO(" Screen Object 2.\n");
}
+
+/**
+ * vmw_execbuf_prepare_dummy_query - Initialize a query result structure at
+ * the start of a buffer object.
+ *
+ * @dev_priv: The device private structure.
+ *
+ * This function will idle the buffer using an uninterruptible wait, then
+ * map the first page and initialize a pending occlusion query result structure,
+ * Finally it will unmap the buffer.
+ *
+ * TODO: Since we're only mapping a single page, we should optimize the map
+ * to use kmap_atomic / iomap_atomic.
+ */
+static void vmw_dummy_query_bo_prepare(struct vmw_private *dev_priv)
+{
+ struct ttm_bo_kmap_obj map;
+ volatile SVGA3dQueryResult *result;
+ bool dummy;
+ int ret;
+ struct ttm_bo_device *bdev = &dev_priv->bdev;
+ struct ttm_buffer_object *bo = dev_priv->dummy_query_bo;
+
+ ttm_bo_reserve(bo, false, false, false, 0);
+ spin_lock(&bdev->fence_lock);
+ ret = ttm_bo_wait(bo, false, false, false);
+ spin_unlock(&bdev->fence_lock);
+ if (unlikely(ret != 0))
+ (void) vmw_fallback_wait(dev_priv, false, true, 0, false,
+ 10*HZ);
+
+ ret = ttm_bo_kmap(bo, 0, 1, &map);
+ if (likely(ret == 0)) {
+ result = ttm_kmap_obj_virtual(&map, &dummy);
+ result->totalSize = sizeof(*result);
+ result->state = SVGA3D_QUERYSTATE_PENDING;
+ result->result32 = 0xff;
+ ttm_bo_kunmap(&map);
+ } else
+ DRM_ERROR("Dummy query buffer map failed.\n");
+ ttm_bo_unreserve(bo);
+}
+
+
+/**
+ * vmw_dummy_query_bo_create - create a bo to hold a dummy query result
+ *
+ * @dev_priv: A device private structure.
+ *
+ * This function creates a small buffer object that holds the query
+ * result for dummy queries emitted as query barriers.
+ * No interruptible waits are done within this function.
+ *
+ * Returns an error if bo creation fails.
+ */
+static int vmw_dummy_query_bo_create(struct vmw_private *dev_priv)
+{
+ return ttm_bo_create(&dev_priv->bdev,
+ PAGE_SIZE,
+ ttm_bo_type_device,
+ &vmw_vram_sys_placement,
+ 0, 0, false, NULL,
+ &dev_priv->dummy_query_bo);
+}
+
+
static int vmw_request_device(struct vmw_private *dev_priv)
{
int ret;
@@ -200,16 +294,42 @@
DRM_ERROR("Unable to initialize FIFO.\n");
return ret;
}
+ vmw_fence_fifo_up(dev_priv->fman);
+ ret = vmw_dummy_query_bo_create(dev_priv);
+ if (unlikely(ret != 0))
+ goto out_no_query_bo;
+ vmw_dummy_query_bo_prepare(dev_priv);
return 0;
+
+out_no_query_bo:
+ vmw_fence_fifo_down(dev_priv->fman);
+ vmw_fifo_release(dev_priv, &dev_priv->fifo);
+ return ret;
}
static void vmw_release_device(struct vmw_private *dev_priv)
{
+ /*
+ * Previous destructions should've released
+ * the pinned bo.
+ */
+
+ BUG_ON(dev_priv->pinned_bo != NULL);
+
+ ttm_bo_unref(&dev_priv->dummy_query_bo);
+ vmw_fence_fifo_down(dev_priv->fman);
vmw_fifo_release(dev_priv, &dev_priv->fifo);
}
-int vmw_3d_resource_inc(struct vmw_private *dev_priv)
+/**
+ * Increase the 3d resource refcount.
+ * If the count was prevously zero, initialize the fifo, switching to svga
+ * mode. Note that the master holds a ref as well, and may request an
+ * explicit switch to svga mode if fb is not running, using @unhide_svga.
+ */
+int vmw_3d_resource_inc(struct vmw_private *dev_priv,
+ bool unhide_svga)
{
int ret = 0;
@@ -218,19 +338,42 @@
ret = vmw_request_device(dev_priv);
if (unlikely(ret != 0))
--dev_priv->num_3d_resources;
+ } else if (unhide_svga) {
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_ENABLE,
+ vmw_read(dev_priv, SVGA_REG_ENABLE) &
+ ~SVGA_REG_ENABLE_HIDE);
+ mutex_unlock(&dev_priv->hw_mutex);
}
+
mutex_unlock(&dev_priv->release_mutex);
return ret;
}
-
-void vmw_3d_resource_dec(struct vmw_private *dev_priv)
+/**
+ * Decrease the 3d resource refcount.
+ * If the count reaches zero, disable the fifo, switching to vga mode.
+ * Note that the master holds a refcount as well, and may request an
+ * explicit switch to vga mode when it releases its refcount to account
+ * for the situation of an X server vt switch to VGA with 3d resources
+ * active.
+ */
+void vmw_3d_resource_dec(struct vmw_private *dev_priv,
+ bool hide_svga)
{
int32_t n3d;
mutex_lock(&dev_priv->release_mutex);
if (unlikely(--dev_priv->num_3d_resources == 0))
vmw_release_device(dev_priv);
+ else if (hide_svga) {
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_ENABLE,
+ vmw_read(dev_priv, SVGA_REG_ENABLE) |
+ SVGA_REG_ENABLE_HIDE);
+ mutex_unlock(&dev_priv->hw_mutex);
+ }
+
n3d = (int32_t) dev_priv->num_3d_resources;
mutex_unlock(&dev_priv->release_mutex);
@@ -252,7 +395,7 @@
dev_priv->dev = dev;
dev_priv->vmw_chipset = chipset;
- dev_priv->last_read_sequence = (uint32_t) -100;
+ dev_priv->last_read_seqno = (uint32_t) -100;
mutex_init(&dev_priv->hw_mutex);
mutex_init(&dev_priv->cmdbuf_mutex);
mutex_init(&dev_priv->release_mutex);
@@ -263,8 +406,10 @@
mutex_init(&dev_priv->init_mutex);
init_waitqueue_head(&dev_priv->fence_queue);
init_waitqueue_head(&dev_priv->fifo_queue);
- atomic_set(&dev_priv->fence_queue_waiters, 0);
+ dev_priv->fence_queue_waiters = 0;
atomic_set(&dev_priv->fifo_queue_waiters, 0);
+ INIT_LIST_HEAD(&dev_priv->surface_lru);
+ dev_priv->used_memory_size = 0;
dev_priv->io_start = pci_resource_start(dev->pdev, 0);
dev_priv->vram_start = pci_resource_start(dev->pdev, 1);
@@ -285,6 +430,10 @@
dev_priv->capabilities = vmw_read(dev_priv, SVGA_REG_CAPABILITIES);
+ dev_priv->vram_size = vmw_read(dev_priv, SVGA_REG_VRAM_SIZE);
+ dev_priv->mmio_size = vmw_read(dev_priv, SVGA_REG_MEM_SIZE);
+ dev_priv->fb_max_width = vmw_read(dev_priv, SVGA_REG_MAX_WIDTH);
+ dev_priv->fb_max_height = vmw_read(dev_priv, SVGA_REG_MAX_HEIGHT);
if (dev_priv->capabilities & SVGA_CAP_GMR) {
dev_priv->max_gmr_descriptors =
vmw_read(dev_priv,
@@ -292,11 +441,19 @@
dev_priv->max_gmr_ids =
vmw_read(dev_priv, SVGA_REG_GMR_MAX_IDS);
}
-
- dev_priv->vram_size = vmw_read(dev_priv, SVGA_REG_VRAM_SIZE);
- dev_priv->mmio_size = vmw_read(dev_priv, SVGA_REG_MEM_SIZE);
- dev_priv->fb_max_width = vmw_read(dev_priv, SVGA_REG_MAX_WIDTH);
- dev_priv->fb_max_height = vmw_read(dev_priv, SVGA_REG_MAX_HEIGHT);
+ if (dev_priv->capabilities & SVGA_CAP_GMR2) {
+ dev_priv->max_gmr_pages =
+ vmw_read(dev_priv, SVGA_REG_GMRS_MAX_PAGES);
+ dev_priv->memory_size =
+ vmw_read(dev_priv, SVGA_REG_MEMORY_SIZE);
+ dev_priv->memory_size -= dev_priv->vram_size;
+ } else {
+ /*
+ * An arbitrary limit of 512MiB on surface
+ * memory. But all HWV8 hardware supports GMR2.
+ */
+ dev_priv->memory_size = 512*1024*1024;
+ }
mutex_unlock(&dev_priv->hw_mutex);
@@ -308,6 +465,12 @@
DRM_INFO("Max GMR descriptors is %u\n",
(unsigned)dev_priv->max_gmr_descriptors);
}
+ if (dev_priv->capabilities & SVGA_CAP_GMR2) {
+ DRM_INFO("Max number of GMR pages is %u\n",
+ (unsigned)dev_priv->max_gmr_pages);
+ DRM_INFO("Max dedicated hypervisor surface memory is %u kiB\n",
+ (unsigned)dev_priv->memory_size / 1024);
+ }
DRM_INFO("VRAM at 0x%08x size is %u kiB\n",
dev_priv->vram_start, dev_priv->vram_size / 1024);
DRM_INFO("MMIO at 0x%08x size is %u kiB\n",
@@ -394,22 +557,34 @@
goto out_no_device;
}
}
+
+ dev_priv->fman = vmw_fence_manager_init(dev_priv);
+ if (unlikely(dev_priv->fman == NULL))
+ goto out_no_fman;
+
+ /* Need to start the fifo to check if we can do screen objects */
+ ret = vmw_3d_resource_inc(dev_priv, true);
+ if (unlikely(ret != 0))
+ goto out_no_fifo;
+ vmw_kms_save_vga(dev_priv);
+
+ /* Start kms and overlay systems, needs fifo. */
ret = vmw_kms_init(dev_priv);
if (unlikely(ret != 0))
goto out_no_kms;
vmw_overlay_init(dev_priv);
+
+ /* 3D Depends on Screen Objects being used. */
+ DRM_INFO("Detected %sdevice 3D availability.\n",
+ vmw_fifo_have_3d(dev_priv) ?
+ "" : "no ");
+
+ /* We might be done with the fifo now */
if (dev_priv->enable_fb) {
- ret = vmw_3d_resource_inc(dev_priv);
- if (unlikely(ret != 0))
- goto out_no_fifo;
- vmw_kms_save_vga(dev_priv);
vmw_fb_init(dev_priv);
- DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ?
- "Detected device 3D availability.\n" :
- "Detected no device 3D availability.\n");
} else {
- DRM_INFO("Delayed 3D detection since we're not "
- "running the device in SVGA mode yet.\n");
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv, true);
}
if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
@@ -426,15 +601,19 @@
return 0;
out_no_irq:
- if (dev_priv->enable_fb) {
+ if (dev_priv->enable_fb)
vmw_fb_close(dev_priv);
- vmw_kms_restore_vga(dev_priv);
- vmw_3d_resource_dec(dev_priv);
- }
-out_no_fifo:
vmw_overlay_close(dev_priv);
vmw_kms_close(dev_priv);
out_no_kms:
+ /* We still have a 3D resource reference held */
+ if (dev_priv->enable_fb) {
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv, false);
+ }
+out_no_fifo:
+ vmw_fence_manager_takedown(dev_priv->fman);
+out_no_fman:
if (dev_priv->stealth)
pci_release_region(dev->pdev, 2);
else
@@ -467,15 +646,18 @@
unregister_pm_notifier(&dev_priv->pm_nb);
+ if (dev_priv->ctx.cmd_bounce)
+ vfree(dev_priv->ctx.cmd_bounce);
if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
drm_irq_uninstall(dev_priv->dev);
if (dev_priv->enable_fb) {
vmw_fb_close(dev_priv);
vmw_kms_restore_vga(dev_priv);
- vmw_3d_resource_dec(dev_priv);
+ vmw_3d_resource_dec(dev_priv, false);
}
vmw_kms_close(dev_priv);
vmw_overlay_close(dev_priv);
+ vmw_fence_manager_takedown(dev_priv->fman);
if (dev_priv->stealth)
pci_release_region(dev->pdev, 2);
else
@@ -646,7 +828,7 @@
int ret = 0;
if (!dev_priv->enable_fb) {
- ret = vmw_3d_resource_inc(dev_priv);
+ ret = vmw_3d_resource_inc(dev_priv, true);
if (unlikely(ret != 0))
return ret;
vmw_kms_save_vga(dev_priv);
@@ -688,7 +870,7 @@
vmw_write(dev_priv, SVGA_REG_TRACES, 1);
mutex_unlock(&dev_priv->hw_mutex);
vmw_kms_restore_vga(dev_priv);
- vmw_3d_resource_dec(dev_priv);
+ vmw_3d_resource_dec(dev_priv, true);
}
return ret;
}
@@ -709,7 +891,7 @@
vmw_fp->locked_master = drm_master_get(file_priv->master);
ret = ttm_vt_lock(&vmaster->lock, false, vmw_fp->tfile);
- vmw_kms_idle_workqueues(vmaster);
+ vmw_execbuf_release_pinned_bo(dev_priv, false, 0);
if (unlikely((ret != 0))) {
DRM_ERROR("Unable to lock TTM at VT switch.\n");
@@ -726,7 +908,7 @@
vmw_write(dev_priv, SVGA_REG_TRACES, 1);
mutex_unlock(&dev_priv->hw_mutex);
vmw_kms_restore_vga(dev_priv);
- vmw_3d_resource_dec(dev_priv);
+ vmw_3d_resource_dec(dev_priv, true);
}
dev_priv->active_master = &dev_priv->fbdev_master;
@@ -761,6 +943,7 @@
* This empties VRAM and unbinds all GMR bindings.
* Buffer contents is moved to swappable memory.
*/
+ vmw_execbuf_release_pinned_bo(dev_priv, false, 0);
ttm_bo_swapout_all(&dev_priv->bdev);
break;
@@ -835,7 +1018,7 @@
*/
dev_priv->suspended = true;
if (dev_priv->enable_fb)
- vmw_3d_resource_dec(dev_priv);
+ vmw_3d_resource_dec(dev_priv, true);
if (dev_priv->num_3d_resources != 0) {
@@ -843,7 +1026,7 @@
"while 3D resources are active.\n");
if (dev_priv->enable_fb)
- vmw_3d_resource_inc(dev_priv);
+ vmw_3d_resource_inc(dev_priv, true);
dev_priv->suspended = false;
return -EBUSY;
}
@@ -862,7 +1045,7 @@
* start fifo.
*/
if (dev_priv->enable_fb)
- vmw_3d_resource_inc(dev_priv);
+ vmw_3d_resource_inc(dev_priv, false);
dev_priv->suspended = false;
}
@@ -886,6 +1069,8 @@
.irq_uninstall = vmw_irq_uninstall,
.irq_handler = vmw_irq_handler,
.get_vblank_counter = vmw_get_vblank_counter,
+ .enable_vblank = vmw_enable_vblank,
+ .disable_vblank = vmw_disable_vblank,
.reclaim_buffers_locked = NULL,
.ioctls = vmw_ioctls,
.num_ioctls = DRM_ARRAY_SIZE(vmw_ioctls),
@@ -902,7 +1087,8 @@
.release = drm_release,
.unlocked_ioctl = vmw_unlocked_ioctl,
.mmap = vmw_mmap,
- .poll = drm_poll,
+ .poll = vmw_fops_poll,
+ .read = vmw_fops_read,
.fasync = drm_fasync,
#if defined(CONFIG_COMPAT)
.compat_ioctl = drm_compat_ioctl,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 10fc01f..30589d0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -38,20 +38,27 @@
#include "ttm/ttm_lock.h"
#include "ttm/ttm_execbuf_util.h"
#include "ttm/ttm_module.h"
+#include "vmwgfx_fence.h"
-#define VMWGFX_DRIVER_DATE "20100927"
-#define VMWGFX_DRIVER_MAJOR 1
-#define VMWGFX_DRIVER_MINOR 4
+#define VMWGFX_DRIVER_DATE "20111008"
+#define VMWGFX_DRIVER_MAJOR 2
+#define VMWGFX_DRIVER_MINOR 2
#define VMWGFX_DRIVER_PATCHLEVEL 0
#define VMWGFX_FILE_PAGE_OFFSET 0x00100000
#define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
#define VMWGFX_MAX_RELOCATIONS 2048
-#define VMWGFX_MAX_GMRS 2048
+#define VMWGFX_MAX_VALIDATIONS 2048
#define VMWGFX_MAX_DISPLAYS 16
+#define VMWGFX_CMD_BOUNCE_INIT_SIZE 32768
#define VMW_PL_GMR TTM_PL_PRIV0
#define VMW_PL_FLAG_GMR TTM_PL_FLAG_PRIV0
+#define VMW_RES_CONTEXT ttm_driver_type0
+#define VMW_RES_SURFACE ttm_driver_type1
+#define VMW_RES_STREAM ttm_driver_type2
+#define VMW_RES_FENCE ttm_driver_type3
+
struct vmw_fpriv {
struct drm_master *locked_master;
struct ttm_object_file *tfile;
@@ -72,9 +79,11 @@
int id;
enum ttm_object_type res_type;
bool avail;
+ void (*remove_from_lists) (struct vmw_resource *res);
void (*hw_destroy) (struct vmw_resource *res);
void (*res_free) (struct vmw_resource *res);
-
+ struct list_head validate_head;
+ struct list_head query_head; /* Protected by the cmdbuf mutex */
/* TODO is a generic snooper needed? */
#if 0
void (*snoop)(struct vmw_resource *res,
@@ -90,8 +99,12 @@
uint32_t *image;
};
+struct vmw_framebuffer;
+struct vmw_surface_offset;
+
struct vmw_surface {
struct vmw_resource res;
+ struct list_head lru_head; /* Protected by the resource lock */
uint32_t flags;
uint32_t format;
uint32_t mip_levels[DRM_VMW_MAX_SURFACE_FACES];
@@ -102,9 +115,12 @@
/* TODO so far just a extra pointer */
struct vmw_cursor_snooper snooper;
+ struct ttm_buffer_object *backup;
+ struct vmw_surface_offset *offsets;
+ uint32_t backup_size;
};
-struct vmw_fence_queue {
+struct vmw_marker_queue {
struct list_head head;
struct timespec lag;
struct timespec lag_time;
@@ -115,16 +131,12 @@
unsigned long reserved_size;
__le32 *dynamic_buffer;
__le32 *static_buffer;
- __le32 *last_buffer;
- uint32_t last_data_size;
- uint32_t last_buffer_size;
- bool last_buffer_add;
unsigned long static_buffer_size;
bool using_bounce_buffer;
uint32_t capabilities;
struct mutex fifo_mutex;
struct rw_semaphore rwsem;
- struct vmw_fence_queue fence_queue;
+ struct vmw_marker_queue marker_queue;
};
struct vmw_relocation {
@@ -136,6 +148,8 @@
struct ida bo_list;
uint32_t last_cid;
bool cid_valid;
+ bool kernel; /**< is the called made from the kernel */
+ struct vmw_resource *cur_ctx;
uint32_t last_sid;
uint32_t sid_translation;
bool sid_valid;
@@ -143,8 +157,16 @@
struct list_head validate_nodes;
struct vmw_relocation relocs[VMWGFX_MAX_RELOCATIONS];
uint32_t cur_reloc;
- struct ttm_validate_buffer val_bufs[VMWGFX_MAX_GMRS];
+ struct ttm_validate_buffer val_bufs[VMWGFX_MAX_VALIDATIONS];
uint32_t cur_val_buf;
+ uint32_t *cmd_bounce;
+ uint32_t cmd_bounce_size;
+ struct list_head resource_list;
+ uint32_t fence_flags;
+ struct list_head query_list;
+ struct ttm_buffer_object *cur_query_bo;
+ uint32_t cur_query_cid;
+ bool query_cid_valid;
};
struct vmw_legacy_display;
@@ -185,6 +207,8 @@
uint32_t capabilities;
uint32_t max_gmr_descriptors;
uint32_t max_gmr_ids;
+ uint32_t max_gmr_pages;
+ uint32_t memory_size;
bool has_gmr;
struct mutex hw_mutex;
@@ -195,12 +219,7 @@
struct vmw_vga_topology_state vga_save[VMWGFX_MAX_DISPLAYS];
uint32_t vga_width;
uint32_t vga_height;
- uint32_t vga_depth;
uint32_t vga_bpp;
- uint32_t vga_pseudo;
- uint32_t vga_red_mask;
- uint32_t vga_green_mask;
- uint32_t vga_blue_mask;
uint32_t vga_bpl;
uint32_t vga_pitchlock;
@@ -212,6 +231,7 @@
void *fb_info;
struct vmw_legacy_display *ldu_priv;
+ struct vmw_screen_object_display *sou_priv;
struct vmw_overlay *overlay_priv;
/*
@@ -240,13 +260,16 @@
* Fencing and IRQs.
*/
- atomic_t fence_seq;
+ atomic_t marker_seq;
wait_queue_head_t fence_queue;
wait_queue_head_t fifo_queue;
- atomic_t fence_queue_waiters;
+ int fence_queue_waiters; /* Protected by hw_mutex */
+ int goal_queue_waiters; /* Protected by hw_mutex */
atomic_t fifo_queue_waiters;
- uint32_t last_read_sequence;
+ uint32_t last_read_seqno;
spinlock_t irq_lock;
+ struct vmw_fence_manager *fman;
+ uint32_t irq_mask;
/*
* Device state
@@ -285,6 +308,26 @@
struct mutex release_mutex;
uint32_t num_3d_resources;
+
+ /*
+ * Query processing. These members
+ * are protected by the cmdbuf mutex.
+ */
+
+ struct ttm_buffer_object *dummy_query_bo;
+ struct ttm_buffer_object *pinned_bo;
+ uint32_t query_cid;
+ bool dummy_query_bo_pinned;
+
+ /*
+ * Surface swapping. The "surface_lru" list is protected by the
+ * resource lock in order to be able to destroy a surface and take
+ * it off the lru atomically. "used_memory_size" is currently
+ * protected by the cmdbuf mutex for simplicity.
+ */
+
+ struct list_head surface_lru;
+ uint32_t used_memory_size;
};
static inline struct vmw_private *vmw_priv(struct drm_device *dev)
@@ -319,8 +362,8 @@
return val;
}
-int vmw_3d_resource_inc(struct vmw_private *dev_priv);
-void vmw_3d_resource_dec(struct vmw_private *dev_priv);
+int vmw_3d_resource_inc(struct vmw_private *dev_priv, bool unhide_svga);
+void vmw_3d_resource_dec(struct vmw_private *dev_priv, bool hide_svga);
/**
* GMR utilities - vmwgfx_gmr.c
@@ -345,7 +388,8 @@
struct drm_file *file_priv);
extern int vmw_context_check(struct vmw_private *dev_priv,
struct ttm_object_file *tfile,
- int id);
+ int id,
+ struct vmw_resource **p_res);
extern void vmw_surface_res_free(struct vmw_resource *res);
extern int vmw_surface_init(struct vmw_private *dev_priv,
struct vmw_surface *srf,
@@ -363,6 +407,8 @@
extern int vmw_surface_check(struct vmw_private *dev_priv,
struct ttm_object_file *tfile,
uint32_t handle, int *id);
+extern int vmw_surface_validate(struct vmw_private *dev_priv,
+ struct vmw_surface *srf);
extern void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo);
extern int vmw_dmabuf_init(struct vmw_private *dev_priv,
struct vmw_dma_buffer *vmw_bo,
@@ -378,10 +424,6 @@
extern void vmw_dmabuf_validate_clear(struct ttm_buffer_object *bo);
extern int vmw_user_dmabuf_lookup(struct ttm_object_file *tfile,
uint32_t id, struct vmw_dma_buffer **out);
-extern int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv,
- struct vmw_dma_buffer *bo);
-extern int vmw_dmabuf_from_vram(struct vmw_private *vmw_priv,
- struct vmw_dma_buffer *bo);
extern int vmw_stream_claim_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int vmw_stream_unref_ioctl(struct drm_device *dev, void *data,
@@ -390,7 +432,30 @@
struct ttm_object_file *tfile,
uint32_t *inout_id,
struct vmw_resource **out);
+extern void vmw_resource_unreserve(struct list_head *list);
+/**
+ * DMA buffer helper routines - vmwgfx_dmabuf.c
+ */
+extern int vmw_dmabuf_to_placement(struct vmw_private *vmw_priv,
+ struct vmw_dma_buffer *bo,
+ struct ttm_placement *placement,
+ bool interruptible);
+extern int vmw_dmabuf_to_vram(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ bool pin, bool interruptible);
+extern int vmw_dmabuf_to_vram_or_gmr(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ bool pin, bool interruptible);
+extern int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv,
+ struct vmw_dma_buffer *bo,
+ bool pin, bool interruptible);
+extern int vmw_dmabuf_unpin(struct vmw_private *vmw_priv,
+ struct vmw_dma_buffer *bo,
+ bool interruptible);
+extern void vmw_bo_get_guest_ptr(const struct ttm_buffer_object *buf,
+ SVGAGuestPtr *ptr);
+extern void vmw_bo_pin(struct ttm_buffer_object *bo, bool pin);
/**
* Misc Ioctl functionality - vmwgfx_ioctl.c
@@ -398,8 +463,16 @@
extern int vmw_getparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern int vmw_fifo_debug_ioctl(struct drm_device *dev, void *data,
+extern int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+extern int vmw_present_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int vmw_present_readback_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern unsigned int vmw_fops_poll(struct file *filp,
+ struct poll_table_struct *wait);
+extern ssize_t vmw_fops_read(struct file *filp, char __user *buffer,
+ size_t count, loff_t *offset);
/**
* Fifo utilities - vmwgfx_fifo.c
@@ -412,11 +485,12 @@
extern void *vmw_fifo_reserve(struct vmw_private *dev_priv, uint32_t bytes);
extern void vmw_fifo_commit(struct vmw_private *dev_priv, uint32_t bytes);
extern int vmw_fifo_send_fence(struct vmw_private *dev_priv,
- uint32_t *sequence);
+ uint32_t *seqno);
extern void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason);
-extern int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma);
extern bool vmw_fifo_have_3d(struct vmw_private *dev_priv);
extern bool vmw_fifo_have_pitchlock(struct vmw_private *dev_priv);
+extern int vmw_fifo_emit_dummy_query(struct vmw_private *dev_priv,
+ uint32_t cid);
/**
* TTM glue - vmwgfx_ttm_glue.c
@@ -434,7 +508,10 @@
extern struct ttm_placement vmw_vram_ne_placement;
extern struct ttm_placement vmw_vram_sys_placement;
extern struct ttm_placement vmw_vram_gmr_placement;
+extern struct ttm_placement vmw_vram_gmr_ne_placement;
extern struct ttm_placement vmw_sys_placement;
+extern struct ttm_placement vmw_evictable_placement;
+extern struct ttm_placement vmw_srf_placement;
extern struct ttm_bo_driver vmw_bo_driver;
extern int vmw_dma_quiescent(struct drm_device *dev);
@@ -444,45 +521,70 @@
extern int vmw_execbuf_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+extern int vmw_execbuf_process(struct drm_file *file_priv,
+ struct vmw_private *dev_priv,
+ void __user *user_commands,
+ void *kernel_commands,
+ uint32_t command_size,
+ uint64_t throttle_us,
+ struct drm_vmw_fence_rep __user
+ *user_fence_rep);
+
+extern void
+vmw_execbuf_release_pinned_bo(struct vmw_private *dev_priv,
+ bool only_on_cid_match, uint32_t cid);
+
+extern int vmw_execbuf_fence_commands(struct drm_file *file_priv,
+ struct vmw_private *dev_priv,
+ struct vmw_fence_obj **p_fence,
+ uint32_t *p_handle);
+extern void vmw_execbuf_copy_fence_user(struct vmw_private *dev_priv,
+ struct vmw_fpriv *vmw_fp,
+ int ret,
+ struct drm_vmw_fence_rep __user
+ *user_fence_rep,
+ struct vmw_fence_obj *fence,
+ uint32_t fence_handle);
/**
* IRQs and wating - vmwgfx_irq.c
*/
extern irqreturn_t vmw_irq_handler(DRM_IRQ_ARGS);
-extern int vmw_wait_fence(struct vmw_private *dev_priv, bool lazy,
- uint32_t sequence, bool interruptible,
- unsigned long timeout);
+extern int vmw_wait_seqno(struct vmw_private *dev_priv, bool lazy,
+ uint32_t seqno, bool interruptible,
+ unsigned long timeout);
extern void vmw_irq_preinstall(struct drm_device *dev);
extern int vmw_irq_postinstall(struct drm_device *dev);
extern void vmw_irq_uninstall(struct drm_device *dev);
-extern bool vmw_fence_signaled(struct vmw_private *dev_priv,
- uint32_t sequence);
-extern int vmw_fence_wait_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
+extern bool vmw_seqno_passed(struct vmw_private *dev_priv,
+ uint32_t seqno);
extern int vmw_fallback_wait(struct vmw_private *dev_priv,
bool lazy,
bool fifo_idle,
- uint32_t sequence,
+ uint32_t seqno,
bool interruptible,
unsigned long timeout);
-extern void vmw_update_sequence(struct vmw_private *dev_priv,
+extern void vmw_update_seqno(struct vmw_private *dev_priv,
struct vmw_fifo_state *fifo_state);
-
+extern void vmw_seqno_waiter_add(struct vmw_private *dev_priv);
+extern void vmw_seqno_waiter_remove(struct vmw_private *dev_priv);
+extern void vmw_goal_waiter_add(struct vmw_private *dev_priv);
+extern void vmw_goal_waiter_remove(struct vmw_private *dev_priv);
/**
- * Rudimentary fence objects currently used only for throttling -
- * vmwgfx_fence.c
+ * Rudimentary fence-like objects currently used only for throttling -
+ * vmwgfx_marker.c
*/
-extern void vmw_fence_queue_init(struct vmw_fence_queue *queue);
-extern void vmw_fence_queue_takedown(struct vmw_fence_queue *queue);
-extern int vmw_fence_push(struct vmw_fence_queue *queue,
- uint32_t sequence);
-extern int vmw_fence_pull(struct vmw_fence_queue *queue,
- uint32_t signaled_sequence);
+extern void vmw_marker_queue_init(struct vmw_marker_queue *queue);
+extern void vmw_marker_queue_takedown(struct vmw_marker_queue *queue);
+extern int vmw_marker_push(struct vmw_marker_queue *queue,
+ uint32_t seqno);
+extern int vmw_marker_pull(struct vmw_marker_queue *queue,
+ uint32_t signaled_seqno);
extern int vmw_wait_lag(struct vmw_private *dev_priv,
- struct vmw_fence_queue *queue, uint32_t us);
+ struct vmw_marker_queue *queue, uint32_t us);
/**
* Kernel framebuffer - vmwgfx_fb.c
@@ -508,16 +610,29 @@
struct ttm_object_file *tfile,
struct ttm_buffer_object *bo,
SVGA3dCmdHeader *header);
-void vmw_kms_write_svga(struct vmw_private *vmw_priv,
- unsigned width, unsigned height, unsigned pitch,
- unsigned bbp, unsigned depth);
-int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
+int vmw_kms_write_svga(struct vmw_private *vmw_priv,
+ unsigned width, unsigned height, unsigned pitch,
+ unsigned bpp, unsigned depth);
void vmw_kms_idle_workqueues(struct vmw_master *vmaster);
bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv,
uint32_t pitch,
uint32_t height);
u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc);
+int vmw_enable_vblank(struct drm_device *dev, int crtc);
+void vmw_disable_vblank(struct drm_device *dev, int crtc);
+int vmw_kms_present(struct vmw_private *dev_priv,
+ struct drm_file *file_priv,
+ struct vmw_framebuffer *vfb,
+ struct vmw_surface *surface,
+ uint32_t sid, int32_t destX, int32_t destY,
+ struct drm_vmw_rect *clips,
+ uint32_t num_clips);
+int vmw_kms_readback(struct vmw_private *dev_priv,
+ struct drm_file *file_priv,
+ struct vmw_framebuffer *vfb,
+ struct drm_vmw_fence_rep __user *user_fence_rep,
+ struct drm_vmw_rect *clips,
+ uint32_t num_clips);
/**
* Overlay control - vmwgfx_overlay.c
@@ -576,4 +691,8 @@
return NULL;
}
+static inline struct ttm_mem_global *vmw_mem_glob(struct vmw_private *dev_priv)
+{
+ return (struct ttm_mem_global *) dev_priv->mem_global_ref.object;
+}
#endif
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index 41b95ed..40932fb 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -44,10 +44,71 @@
return 0;
}
+static void vmw_resource_to_validate_list(struct vmw_sw_context *sw_context,
+ struct vmw_resource **p_res)
+{
+ struct vmw_resource *res = *p_res;
+
+ if (list_empty(&res->validate_head)) {
+ list_add_tail(&res->validate_head, &sw_context->resource_list);
+ *p_res = NULL;
+ } else
+ vmw_resource_unreference(p_res);
+}
+
+/**
+ * vmw_bo_to_validate_list - add a bo to a validate list
+ *
+ * @sw_context: The software context used for this command submission batch.
+ * @bo: The buffer object to add.
+ * @fence_flags: Fence flags to be or'ed with any other fence flags for
+ * this buffer on this submission batch.
+ * @p_val_node: If non-NULL Will be updated with the validate node number
+ * on return.
+ *
+ * Returns -EINVAL if the limit of number of buffer objects per command
+ * submission is reached.
+ */
+static int vmw_bo_to_validate_list(struct vmw_sw_context *sw_context,
+ struct ttm_buffer_object *bo,
+ uint32_t fence_flags,
+ uint32_t *p_val_node)
+{
+ uint32_t val_node;
+ struct ttm_validate_buffer *val_buf;
+
+ val_node = vmw_dmabuf_validate_node(bo, sw_context->cur_val_buf);
+
+ if (unlikely(val_node >= VMWGFX_MAX_VALIDATIONS)) {
+ DRM_ERROR("Max number of DMA buffers per submission"
+ " exceeded.\n");
+ return -EINVAL;
+ }
+
+ val_buf = &sw_context->val_bufs[val_node];
+ if (unlikely(val_node == sw_context->cur_val_buf)) {
+ val_buf->new_sync_obj_arg = NULL;
+ val_buf->bo = ttm_bo_reference(bo);
+ list_add_tail(&val_buf->head, &sw_context->validate_nodes);
+ ++sw_context->cur_val_buf;
+ }
+
+ val_buf->new_sync_obj_arg = (void *)
+ ((unsigned long) val_buf->new_sync_obj_arg | fence_flags);
+ sw_context->fence_flags |= fence_flags;
+
+ if (p_val_node)
+ *p_val_node = val_node;
+
+ return 0;
+}
+
static int vmw_cmd_cid_check(struct vmw_private *dev_priv,
struct vmw_sw_context *sw_context,
SVGA3dCmdHeader *header)
{
+ struct vmw_resource *ctx;
+
struct vmw_cid_cmd {
SVGA3dCmdHeader header;
__le32 cid;
@@ -58,7 +119,8 @@
if (likely(sw_context->cid_valid && cmd->cid == sw_context->last_cid))
return 0;
- ret = vmw_context_check(dev_priv, sw_context->tfile, cmd->cid);
+ ret = vmw_context_check(dev_priv, sw_context->tfile, cmd->cid,
+ &ctx);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use context %u\n",
(unsigned) cmd->cid);
@@ -67,6 +129,8 @@
sw_context->last_cid = cmd->cid;
sw_context->cid_valid = true;
+ sw_context->cur_ctx = ctx;
+ vmw_resource_to_validate_list(sw_context, &ctx);
return 0;
}
@@ -75,29 +139,45 @@
struct vmw_sw_context *sw_context,
uint32_t *sid)
{
+ struct vmw_surface *srf;
+ int ret;
+ struct vmw_resource *res;
+
if (*sid == SVGA3D_INVALID_ID)
return 0;
- if (unlikely((!sw_context->sid_valid ||
- *sid != sw_context->last_sid))) {
- int real_id;
- int ret = vmw_surface_check(dev_priv, sw_context->tfile,
- *sid, &real_id);
-
- if (unlikely(ret != 0)) {
- DRM_ERROR("Could ot find or use surface 0x%08x "
- "address 0x%08lx\n",
- (unsigned int) *sid,
- (unsigned long) sid);
- return ret;
- }
-
- sw_context->last_sid = *sid;
- sw_context->sid_valid = true;
- *sid = real_id;
- sw_context->sid_translation = real_id;
- } else
+ if (likely((sw_context->sid_valid &&
+ *sid == sw_context->last_sid))) {
*sid = sw_context->sid_translation;
+ return 0;
+ }
+
+ ret = vmw_user_surface_lookup_handle(dev_priv,
+ sw_context->tfile,
+ *sid, &srf);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Could ot find or use surface 0x%08x "
+ "address 0x%08lx\n",
+ (unsigned int) *sid,
+ (unsigned long) sid);
+ return ret;
+ }
+
+ ret = vmw_surface_validate(dev_priv, srf);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Could not validate surface.\n");
+ vmw_surface_unreference(&srf);
+ return ret;
+ }
+
+ sw_context->last_sid = *sid;
+ sw_context->sid_valid = true;
+ sw_context->sid_translation = srf->res.id;
+ *sid = sw_context->sid_translation;
+
+ res = &srf->res;
+ vmw_resource_to_validate_list(sw_context, &res);
return 0;
}
@@ -166,6 +246,12 @@
} *cmd;
cmd = container_of(header, struct vmw_sid_cmd, header);
+
+ if (unlikely(!sw_context->kernel)) {
+ DRM_ERROR("Kernel only SVGA3d command: %u.\n", cmd->header.id);
+ return -EPERM;
+ }
+
return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.srcImage.sid);
}
@@ -178,10 +264,179 @@
SVGA3dCmdPresent body;
} *cmd;
+
cmd = container_of(header, struct vmw_sid_cmd, header);
+
+ if (unlikely(!sw_context->kernel)) {
+ DRM_ERROR("Kernel only SVGA3d command: %u.\n", cmd->header.id);
+ return -EPERM;
+ }
+
return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid);
}
+/**
+ * vmw_query_bo_switch_prepare - Prepare to switch pinned buffer for queries.
+ *
+ * @dev_priv: The device private structure.
+ * @cid: The hardware context for the next query.
+ * @new_query_bo: The new buffer holding query results.
+ * @sw_context: The software context used for this command submission.
+ *
+ * This function checks whether @new_query_bo is suitable for holding
+ * query results, and if another buffer currently is pinned for query
+ * results. If so, the function prepares the state of @sw_context for
+ * switching pinned buffers after successful submission of the current
+ * command batch. It also checks whether we're using a new query context.
+ * In that case, it makes sure we emit a query barrier for the old
+ * context before the current query buffer is fenced.
+ */
+static int vmw_query_bo_switch_prepare(struct vmw_private *dev_priv,
+ uint32_t cid,
+ struct ttm_buffer_object *new_query_bo,
+ struct vmw_sw_context *sw_context)
+{
+ int ret;
+ bool add_cid = false;
+ uint32_t cid_to_add;
+
+ if (unlikely(new_query_bo != sw_context->cur_query_bo)) {
+
+ if (unlikely(new_query_bo->num_pages > 4)) {
+ DRM_ERROR("Query buffer too large.\n");
+ return -EINVAL;
+ }
+
+ if (unlikely(sw_context->cur_query_bo != NULL)) {
+ BUG_ON(!sw_context->query_cid_valid);
+ add_cid = true;
+ cid_to_add = sw_context->cur_query_cid;
+ ret = vmw_bo_to_validate_list(sw_context,
+ sw_context->cur_query_bo,
+ DRM_VMW_FENCE_FLAG_EXEC,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+ }
+ sw_context->cur_query_bo = new_query_bo;
+
+ ret = vmw_bo_to_validate_list(sw_context,
+ dev_priv->dummy_query_bo,
+ DRM_VMW_FENCE_FLAG_EXEC,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+
+ }
+
+ if (unlikely(cid != sw_context->cur_query_cid &&
+ sw_context->query_cid_valid)) {
+ add_cid = true;
+ cid_to_add = sw_context->cur_query_cid;
+ }
+
+ sw_context->cur_query_cid = cid;
+ sw_context->query_cid_valid = true;
+
+ if (add_cid) {
+ struct vmw_resource *ctx = sw_context->cur_ctx;
+
+ if (list_empty(&ctx->query_head))
+ list_add_tail(&ctx->query_head,
+ &sw_context->query_list);
+ ret = vmw_bo_to_validate_list(sw_context,
+ dev_priv->dummy_query_bo,
+ DRM_VMW_FENCE_FLAG_EXEC,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+ }
+ return 0;
+}
+
+
+/**
+ * vmw_query_bo_switch_commit - Finalize switching pinned query buffer
+ *
+ * @dev_priv: The device private structure.
+ * @sw_context: The software context used for this command submission batch.
+ *
+ * This function will check if we're switching query buffers, and will then,
+ * if no other query waits are issued this command submission batch,
+ * issue a dummy occlusion query wait used as a query barrier. When the fence
+ * object following that query wait has signaled, we are sure that all
+ * preseding queries have finished, and the old query buffer can be unpinned.
+ * However, since both the new query buffer and the old one are fenced with
+ * that fence, we can do an asynchronus unpin now, and be sure that the
+ * old query buffer won't be moved until the fence has signaled.
+ *
+ * As mentioned above, both the new - and old query buffers need to be fenced
+ * using a sequence emitted *after* calling this function.
+ */
+static void vmw_query_bo_switch_commit(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context)
+{
+
+ struct vmw_resource *ctx, *next_ctx;
+ int ret;
+
+ /*
+ * The validate list should still hold references to all
+ * contexts here.
+ */
+
+ list_for_each_entry_safe(ctx, next_ctx, &sw_context->query_list,
+ query_head) {
+ list_del_init(&ctx->query_head);
+
+ BUG_ON(list_empty(&ctx->validate_head));
+
+ ret = vmw_fifo_emit_dummy_query(dev_priv, ctx->id);
+
+ if (unlikely(ret != 0))
+ DRM_ERROR("Out of fifo space for dummy query.\n");
+ }
+
+ if (dev_priv->pinned_bo != sw_context->cur_query_bo) {
+ if (dev_priv->pinned_bo) {
+ vmw_bo_pin(dev_priv->pinned_bo, false);
+ ttm_bo_unref(&dev_priv->pinned_bo);
+ }
+
+ vmw_bo_pin(sw_context->cur_query_bo, true);
+
+ /*
+ * We pin also the dummy_query_bo buffer so that we
+ * don't need to validate it when emitting
+ * dummy queries in context destroy paths.
+ */
+
+ vmw_bo_pin(dev_priv->dummy_query_bo, true);
+ dev_priv->dummy_query_bo_pinned = true;
+
+ dev_priv->query_cid = sw_context->cur_query_cid;
+ dev_priv->pinned_bo =
+ ttm_bo_reference(sw_context->cur_query_bo);
+ }
+}
+
+/**
+ * vmw_query_switch_backoff - clear query barrier list
+ * @sw_context: The sw context used for this submission batch.
+ *
+ * This function is used as part of an error path, where a previously
+ * set up list of query barriers needs to be cleared.
+ *
+ */
+static void vmw_query_switch_backoff(struct vmw_sw_context *sw_context)
+{
+ struct list_head *list, *next;
+
+ list_for_each_safe(list, next, &sw_context->query_list) {
+ list_del_init(list);
+ }
+}
+
static int vmw_translate_guest_ptr(struct vmw_private *dev_priv,
struct vmw_sw_context *sw_context,
SVGAGuestPtr *ptr,
@@ -191,8 +446,6 @@
struct ttm_buffer_object *bo;
uint32_t handle = ptr->gmrId;
struct vmw_relocation *reloc;
- uint32_t cur_validate_node;
- struct ttm_validate_buffer *val_buf;
int ret;
ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
@@ -212,22 +465,11 @@
reloc = &sw_context->relocs[sw_context->cur_reloc++];
reloc->location = ptr;
- cur_validate_node = vmw_dmabuf_validate_node(bo, sw_context->cur_val_buf);
- if (unlikely(cur_validate_node >= VMWGFX_MAX_GMRS)) {
- DRM_ERROR("Max number of DMA buffers per submission"
- " exceeded.\n");
- ret = -EINVAL;
+ ret = vmw_bo_to_validate_list(sw_context, bo, DRM_VMW_FENCE_FLAG_EXEC,
+ &reloc->index);
+ if (unlikely(ret != 0))
goto out_no_reloc;
- }
- reloc->index = cur_validate_node;
- if (unlikely(cur_validate_node == sw_context->cur_val_buf)) {
- val_buf = &sw_context->val_bufs[cur_validate_node];
- val_buf->bo = ttm_bo_reference(bo);
- val_buf->new_sync_obj_arg = (void *) dev_priv;
- list_add_tail(&val_buf->head, &sw_context->validate_nodes);
- ++sw_context->cur_val_buf;
- }
*vmw_bo_p = vmw_bo;
return 0;
@@ -259,8 +501,11 @@
if (unlikely(ret != 0))
return ret;
+ ret = vmw_query_bo_switch_prepare(dev_priv, cmd->q.cid,
+ &vmw_bo->base, sw_context);
+
vmw_dmabuf_unreference(&vmw_bo);
- return 0;
+ return ret;
}
static int vmw_cmd_wait_query(struct vmw_private *dev_priv,
@@ -273,6 +518,7 @@
SVGA3dCmdWaitForQuery q;
} *cmd;
int ret;
+ struct vmw_resource *ctx;
cmd = container_of(header, struct vmw_query_cmd, header);
ret = vmw_cmd_cid_check(dev_priv, sw_context, header);
@@ -286,10 +532,19 @@
return ret;
vmw_dmabuf_unreference(&vmw_bo);
+
+ /*
+ * This wait will act as a barrier for previous waits for this
+ * context.
+ */
+
+ ctx = sw_context->cur_ctx;
+ if (!list_empty(&ctx->query_head))
+ list_del_init(&ctx->query_head);
+
return 0;
}
-
static int vmw_cmd_dma(struct vmw_private *dev_priv,
struct vmw_sw_context *sw_context,
SVGA3dCmdHeader *header)
@@ -302,6 +557,7 @@
SVGA3dCmdSurfaceDMA dma;
} *cmd;
int ret;
+ struct vmw_resource *res;
cmd = container_of(header, struct vmw_dma_cmd, header);
ret = vmw_translate_guest_ptr(dev_priv, sw_context,
@@ -318,18 +574,28 @@
goto out_no_reloc;
}
- /**
+ ret = vmw_surface_validate(dev_priv, srf);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Culd not validate surface.\n");
+ goto out_no_validate;
+ }
+
+ /*
* Patch command stream with device SID.
*/
-
cmd->dma.host.sid = srf->res.id;
vmw_kms_cursor_snoop(srf, sw_context->tfile, bo, header);
- /**
- * FIXME: May deadlock here when called from the
- * command parsing code.
- */
- vmw_surface_unreference(&srf);
+ vmw_dmabuf_unreference(&vmw_bo);
+
+ res = &srf->res;
+ vmw_resource_to_validate_list(sw_context, &res);
+
+ return 0;
+
+out_no_validate:
+ vmw_surface_unreference(&srf);
out_no_reloc:
vmw_dmabuf_unreference(&vmw_bo);
return ret;
@@ -419,6 +685,71 @@
return 0;
}
+static int vmw_cmd_check_define_gmrfb(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ void *buf)
+{
+ struct vmw_dma_buffer *vmw_bo;
+ int ret;
+
+ struct {
+ uint32_t header;
+ SVGAFifoCmdDefineGMRFB body;
+ } *cmd = buf;
+
+ ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+ &cmd->body.ptr,
+ &vmw_bo);
+ if (unlikely(ret != 0))
+ return ret;
+
+ vmw_dmabuf_unreference(&vmw_bo);
+
+ return ret;
+}
+
+static int vmw_cmd_check_not_3d(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ void *buf, uint32_t *size)
+{
+ uint32_t size_remaining = *size;
+ uint32_t cmd_id;
+
+ cmd_id = le32_to_cpu(((uint32_t *)buf)[0]);
+ switch (cmd_id) {
+ case SVGA_CMD_UPDATE:
+ *size = sizeof(uint32_t) + sizeof(SVGAFifoCmdUpdate);
+ break;
+ case SVGA_CMD_DEFINE_GMRFB:
+ *size = sizeof(uint32_t) + sizeof(SVGAFifoCmdDefineGMRFB);
+ break;
+ case SVGA_CMD_BLIT_GMRFB_TO_SCREEN:
+ *size = sizeof(uint32_t) + sizeof(SVGAFifoCmdBlitGMRFBToScreen);
+ break;
+ case SVGA_CMD_BLIT_SCREEN_TO_GMRFB:
+ *size = sizeof(uint32_t) + sizeof(SVGAFifoCmdBlitGMRFBToScreen);
+ break;
+ default:
+ DRM_ERROR("Unsupported SVGA command: %u.\n", cmd_id);
+ return -EINVAL;
+ }
+
+ if (*size > size_remaining) {
+ DRM_ERROR("Invalid SVGA command (size mismatch):"
+ " %u.\n", cmd_id);
+ return -EINVAL;
+ }
+
+ if (unlikely(!sw_context->kernel)) {
+ DRM_ERROR("Kernel only SVGA command: %u.\n", cmd_id);
+ return -EPERM;
+ }
+
+ if (cmd_id == SVGA_CMD_DEFINE_GMRFB)
+ return vmw_cmd_check_define_gmrfb(dev_priv, sw_context, buf);
+
+ return 0;
+}
typedef int (*vmw_cmd_func) (struct vmw_private *,
struct vmw_sw_context *,
@@ -471,11 +802,11 @@
SVGA3dCmdHeader *header = (SVGA3dCmdHeader *) buf;
int ret;
- cmd_id = ((uint32_t *)buf)[0];
- if (cmd_id == SVGA_CMD_UPDATE) {
- *size = 5 << 2;
- return 0;
- }
+ cmd_id = le32_to_cpu(((uint32_t *)buf)[0]);
+ /* Handle any none 3D commands */
+ if (unlikely(cmd_id < SVGA_CMD_MAX))
+ return vmw_cmd_check_not_3d(dev_priv, sw_context, buf, size);
+
cmd_id = le32_to_cpu(header->id);
*size = le32_to_cpu(header->size) + sizeof(SVGA3dCmdHeader);
@@ -500,7 +831,8 @@
static int vmw_cmd_check_all(struct vmw_private *dev_priv,
struct vmw_sw_context *sw_context,
- void *buf, uint32_t size)
+ void *buf,
+ uint32_t size)
{
int32_t cur_size = size;
int ret;
@@ -550,7 +882,11 @@
static void vmw_clear_validations(struct vmw_sw_context *sw_context)
{
struct ttm_validate_buffer *entry, *next;
+ struct vmw_resource *res, *res_next;
+ /*
+ * Drop references to DMA buffers held during command submission.
+ */
list_for_each_entry_safe(entry, next, &sw_context->validate_nodes,
head) {
list_del(&entry->head);
@@ -559,6 +895,16 @@
sw_context->cur_val_buf--;
}
BUG_ON(sw_context->cur_val_buf != 0);
+
+ /*
+ * Drop references to resources held during command submission.
+ */
+ vmw_resource_unreserve(&sw_context->resource_list);
+ list_for_each_entry_safe(res, res_next, &sw_context->resource_list,
+ validate_head) {
+ list_del_init(&res->validate_head);
+ vmw_resource_unreference(&res);
+ }
}
static int vmw_validate_single_buffer(struct vmw_private *dev_priv,
@@ -566,6 +912,16 @@
{
int ret;
+
+ /*
+ * Don't validate pinned buffers.
+ */
+
+ if (bo == dev_priv->pinned_bo ||
+ (bo == dev_priv->dummy_query_bo &&
+ dev_priv->dummy_query_bo_pinned))
+ return 0;
+
/**
* Put BO in VRAM if there is space, otherwise as a GMR.
* If there is no space in VRAM and GMR ids are all used up,
@@ -602,57 +958,208 @@
return 0;
}
-int vmw_execbuf_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+static int vmw_resize_cmd_bounce(struct vmw_sw_context *sw_context,
+ uint32_t size)
{
- struct vmw_private *dev_priv = vmw_priv(dev);
- struct drm_vmw_execbuf_arg *arg = (struct drm_vmw_execbuf_arg *)data;
- struct drm_vmw_fence_rep fence_rep;
- struct drm_vmw_fence_rep __user *user_fence_rep;
- int ret;
- void *user_cmd;
- void *cmd;
- uint32_t sequence;
- struct vmw_sw_context *sw_context = &dev_priv->ctx;
- struct vmw_master *vmaster = vmw_master(file_priv->master);
+ if (likely(sw_context->cmd_bounce_size >= size))
+ return 0;
- ret = ttm_read_lock(&vmaster->lock, true);
- if (unlikely(ret != 0))
- return ret;
+ if (sw_context->cmd_bounce_size == 0)
+ sw_context->cmd_bounce_size = VMWGFX_CMD_BOUNCE_INIT_SIZE;
+
+ while (sw_context->cmd_bounce_size < size) {
+ sw_context->cmd_bounce_size =
+ PAGE_ALIGN(sw_context->cmd_bounce_size +
+ (sw_context->cmd_bounce_size >> 1));
+ }
+
+ if (sw_context->cmd_bounce != NULL)
+ vfree(sw_context->cmd_bounce);
+
+ sw_context->cmd_bounce = vmalloc(sw_context->cmd_bounce_size);
+
+ if (sw_context->cmd_bounce == NULL) {
+ DRM_ERROR("Failed to allocate command bounce buffer.\n");
+ sw_context->cmd_bounce_size = 0;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * vmw_execbuf_fence_commands - create and submit a command stream fence
+ *
+ * Creates a fence object and submits a command stream marker.
+ * If this fails for some reason, We sync the fifo and return NULL.
+ * It is then safe to fence buffers with a NULL pointer.
+ *
+ * If @p_handle is not NULL @file_priv must also not be NULL. Creates
+ * a userspace handle if @p_handle is not NULL, otherwise not.
+ */
+
+int vmw_execbuf_fence_commands(struct drm_file *file_priv,
+ struct vmw_private *dev_priv,
+ struct vmw_fence_obj **p_fence,
+ uint32_t *p_handle)
+{
+ uint32_t sequence;
+ int ret;
+ bool synced = false;
+
+ /* p_handle implies file_priv. */
+ BUG_ON(p_handle != NULL && file_priv == NULL);
+
+ ret = vmw_fifo_send_fence(dev_priv, &sequence);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Fence submission error. Syncing.\n");
+ synced = true;
+ }
+
+ if (p_handle != NULL)
+ ret = vmw_user_fence_create(file_priv, dev_priv->fman,
+ sequence,
+ DRM_VMW_FENCE_FLAG_EXEC,
+ p_fence, p_handle);
+ else
+ ret = vmw_fence_create(dev_priv->fman, sequence,
+ DRM_VMW_FENCE_FLAG_EXEC,
+ p_fence);
+
+ if (unlikely(ret != 0 && !synced)) {
+ (void) vmw_fallback_wait(dev_priv, false, false,
+ sequence, false,
+ VMW_FENCE_WAIT_TIMEOUT);
+ *p_fence = NULL;
+ }
+
+ return 0;
+}
+
+/**
+ * vmw_execbuf_copy_fence_user - copy fence object information to
+ * user-space.
+ *
+ * @dev_priv: Pointer to a vmw_private struct.
+ * @vmw_fp: Pointer to the struct vmw_fpriv representing the calling file.
+ * @ret: Return value from fence object creation.
+ * @user_fence_rep: User space address of a struct drm_vmw_fence_rep to
+ * which the information should be copied.
+ * @fence: Pointer to the fenc object.
+ * @fence_handle: User-space fence handle.
+ *
+ * This function copies fence information to user-space. If copying fails,
+ * The user-space struct drm_vmw_fence_rep::error member is hopefully
+ * left untouched, and if it's preloaded with an -EFAULT by user-space,
+ * the error will hopefully be detected.
+ * Also if copying fails, user-space will be unable to signal the fence
+ * object so we wait for it immediately, and then unreference the
+ * user-space reference.
+ */
+void
+vmw_execbuf_copy_fence_user(struct vmw_private *dev_priv,
+ struct vmw_fpriv *vmw_fp,
+ int ret,
+ struct drm_vmw_fence_rep __user *user_fence_rep,
+ struct vmw_fence_obj *fence,
+ uint32_t fence_handle)
+{
+ struct drm_vmw_fence_rep fence_rep;
+
+ if (user_fence_rep == NULL)
+ return;
+
+ memset(&fence_rep, 0, sizeof(fence_rep));
+
+ fence_rep.error = ret;
+ if (ret == 0) {
+ BUG_ON(fence == NULL);
+
+ fence_rep.handle = fence_handle;
+ fence_rep.seqno = fence->seqno;
+ vmw_update_seqno(dev_priv, &dev_priv->fifo);
+ fence_rep.passed_seqno = dev_priv->last_read_seqno;
+ }
+
+ /*
+ * copy_to_user errors will be detected by user space not
+ * seeing fence_rep::error filled in. Typically
+ * user-space would have pre-set that member to -EFAULT.
+ */
+ ret = copy_to_user(user_fence_rep, &fence_rep,
+ sizeof(fence_rep));
+
+ /*
+ * User-space lost the fence object. We need to sync
+ * and unreference the handle.
+ */
+ if (unlikely(ret != 0) && (fence_rep.error == 0)) {
+ ttm_ref_object_base_unref(vmw_fp->tfile,
+ fence_handle, TTM_REF_USAGE);
+ DRM_ERROR("Fence copy error. Syncing.\n");
+ (void) vmw_fence_obj_wait(fence, fence->signal_mask,
+ false, false,
+ VMW_FENCE_WAIT_TIMEOUT);
+ }
+}
+
+int vmw_execbuf_process(struct drm_file *file_priv,
+ struct vmw_private *dev_priv,
+ void __user *user_commands,
+ void *kernel_commands,
+ uint32_t command_size,
+ uint64_t throttle_us,
+ struct drm_vmw_fence_rep __user *user_fence_rep)
+{
+ struct vmw_sw_context *sw_context = &dev_priv->ctx;
+ struct vmw_fence_obj *fence;
+ uint32_t handle;
+ void *cmd;
+ int ret;
ret = mutex_lock_interruptible(&dev_priv->cmdbuf_mutex);
- if (unlikely(ret != 0)) {
- ret = -ERESTARTSYS;
- goto out_no_cmd_mutex;
- }
+ if (unlikely(ret != 0))
+ return -ERESTARTSYS;
- cmd = vmw_fifo_reserve(dev_priv, arg->command_size);
- if (unlikely(cmd == NULL)) {
- DRM_ERROR("Failed reserving fifo space for commands.\n");
- ret = -ENOMEM;
- goto out_unlock;
- }
+ if (kernel_commands == NULL) {
+ sw_context->kernel = false;
- user_cmd = (void __user *)(unsigned long)arg->commands;
- ret = copy_from_user(cmd, user_cmd, arg->command_size);
+ ret = vmw_resize_cmd_bounce(sw_context, command_size);
+ if (unlikely(ret != 0))
+ goto out_unlock;
- if (unlikely(ret != 0)) {
- ret = -EFAULT;
- DRM_ERROR("Failed copying commands.\n");
- goto out_commit;
- }
+
+ ret = copy_from_user(sw_context->cmd_bounce,
+ user_commands, command_size);
+
+ if (unlikely(ret != 0)) {
+ ret = -EFAULT;
+ DRM_ERROR("Failed copying commands.\n");
+ goto out_unlock;
+ }
+ kernel_commands = sw_context->cmd_bounce;
+ } else
+ sw_context->kernel = true;
sw_context->tfile = vmw_fpriv(file_priv)->tfile;
sw_context->cid_valid = false;
sw_context->sid_valid = false;
sw_context->cur_reloc = 0;
sw_context->cur_val_buf = 0;
+ sw_context->fence_flags = 0;
+ INIT_LIST_HEAD(&sw_context->query_list);
+ INIT_LIST_HEAD(&sw_context->resource_list);
+ sw_context->cur_query_bo = dev_priv->pinned_bo;
+ sw_context->cur_query_cid = dev_priv->query_cid;
+ sw_context->query_cid_valid = (dev_priv->pinned_bo != NULL);
INIT_LIST_HEAD(&sw_context->validate_nodes);
- ret = vmw_cmd_check_all(dev_priv, sw_context, cmd, arg->command_size);
+ ret = vmw_cmd_check_all(dev_priv, sw_context, kernel_commands,
+ command_size);
if (unlikely(ret != 0))
goto out_err;
+
ret = ttm_eu_reserve_buffers(&sw_context->validate_nodes);
if (unlikely(ret != 0))
goto out_err;
@@ -663,57 +1170,206 @@
vmw_apply_relocations(sw_context);
- if (arg->throttle_us) {
- ret = vmw_wait_lag(dev_priv, &dev_priv->fifo.fence_queue,
- arg->throttle_us);
+ if (throttle_us) {
+ ret = vmw_wait_lag(dev_priv, &dev_priv->fifo.marker_queue,
+ throttle_us);
if (unlikely(ret != 0))
- goto out_err;
+ goto out_throttle;
}
- vmw_fifo_commit(dev_priv, arg->command_size);
+ cmd = vmw_fifo_reserve(dev_priv, command_size);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Failed reserving fifo space for commands.\n");
+ ret = -ENOMEM;
+ goto out_throttle;
+ }
- ret = vmw_fifo_send_fence(dev_priv, &sequence);
+ memcpy(cmd, kernel_commands, command_size);
+ vmw_fifo_commit(dev_priv, command_size);
- ttm_eu_fence_buffer_objects(&sw_context->validate_nodes,
- (void *)(unsigned long) sequence);
- vmw_clear_validations(sw_context);
- mutex_unlock(&dev_priv->cmdbuf_mutex);
-
+ vmw_query_bo_switch_commit(dev_priv, sw_context);
+ ret = vmw_execbuf_fence_commands(file_priv, dev_priv,
+ &fence,
+ (user_fence_rep) ? &handle : NULL);
/*
* This error is harmless, because if fence submission fails,
- * vmw_fifo_send_fence will sync.
+ * vmw_fifo_send_fence will sync. The error will be propagated to
+ * user-space in @fence_rep
*/
if (ret != 0)
DRM_ERROR("Fence submission error. Syncing.\n");
- fence_rep.error = ret;
- fence_rep.fence_seq = (uint64_t) sequence;
- fence_rep.pad64 = 0;
+ ttm_eu_fence_buffer_objects(&sw_context->validate_nodes,
+ (void *) fence);
- user_fence_rep = (struct drm_vmw_fence_rep __user *)
- (unsigned long)arg->fence_rep;
+ vmw_clear_validations(sw_context);
+ vmw_execbuf_copy_fence_user(dev_priv, vmw_fpriv(file_priv), ret,
+ user_fence_rep, fence, handle);
- /*
- * copy_to_user errors will be detected by user space not
- * seeing fence_rep::error filled in.
- */
+ if (likely(fence != NULL))
+ vmw_fence_obj_unreference(&fence);
- ret = copy_to_user(user_fence_rep, &fence_rep, sizeof(fence_rep));
-
- vmw_kms_cursor_post_execbuf(dev_priv);
- ttm_read_unlock(&vmaster->lock);
+ mutex_unlock(&dev_priv->cmdbuf_mutex);
return 0;
+
out_err:
vmw_free_relocations(sw_context);
+out_throttle:
+ vmw_query_switch_backoff(sw_context);
ttm_eu_backoff_reservation(&sw_context->validate_nodes);
vmw_clear_validations(sw_context);
-out_commit:
- vmw_fifo_commit(dev_priv, 0);
out_unlock:
mutex_unlock(&dev_priv->cmdbuf_mutex);
-out_no_cmd_mutex:
+ return ret;
+}
+
+/**
+ * vmw_execbuf_unpin_panic - Idle the fifo and unpin the query buffer.
+ *
+ * @dev_priv: The device private structure.
+ *
+ * This function is called to idle the fifo and unpin the query buffer
+ * if the normal way to do this hits an error, which should typically be
+ * extremely rare.
+ */
+static void vmw_execbuf_unpin_panic(struct vmw_private *dev_priv)
+{
+ DRM_ERROR("Can't unpin query buffer. Trying to recover.\n");
+
+ (void) vmw_fallback_wait(dev_priv, false, true, 0, false, 10*HZ);
+ vmw_bo_pin(dev_priv->pinned_bo, false);
+ vmw_bo_pin(dev_priv->dummy_query_bo, false);
+ dev_priv->dummy_query_bo_pinned = false;
+}
+
+
+/**
+ * vmw_execbuf_release_pinned_bo - Flush queries and unpin the pinned
+ * query bo.
+ *
+ * @dev_priv: The device private structure.
+ * @only_on_cid_match: Only flush and unpin if the current active query cid
+ * matches @cid.
+ * @cid: Optional context id to match.
+ *
+ * This function should be used to unpin the pinned query bo, or
+ * as a query barrier when we need to make sure that all queries have
+ * finished before the next fifo command. (For example on hardware
+ * context destructions where the hardware may otherwise leak unfinished
+ * queries).
+ *
+ * This function does not return any failure codes, but make attempts
+ * to do safe unpinning in case of errors.
+ *
+ * The function will synchronize on the previous query barrier, and will
+ * thus not finish until that barrier has executed.
+ */
+void vmw_execbuf_release_pinned_bo(struct vmw_private *dev_priv,
+ bool only_on_cid_match, uint32_t cid)
+{
+ int ret = 0;
+ struct list_head validate_list;
+ struct ttm_validate_buffer pinned_val, query_val;
+ struct vmw_fence_obj *fence;
+
+ mutex_lock(&dev_priv->cmdbuf_mutex);
+
+ if (dev_priv->pinned_bo == NULL)
+ goto out_unlock;
+
+ if (only_on_cid_match && cid != dev_priv->query_cid)
+ goto out_unlock;
+
+ INIT_LIST_HEAD(&validate_list);
+
+ pinned_val.new_sync_obj_arg = (void *)(unsigned long)
+ DRM_VMW_FENCE_FLAG_EXEC;
+ pinned_val.bo = ttm_bo_reference(dev_priv->pinned_bo);
+ list_add_tail(&pinned_val.head, &validate_list);
+
+ query_val.new_sync_obj_arg = pinned_val.new_sync_obj_arg;
+ query_val.bo = ttm_bo_reference(dev_priv->dummy_query_bo);
+ list_add_tail(&query_val.head, &validate_list);
+
+ do {
+ ret = ttm_eu_reserve_buffers(&validate_list);
+ } while (ret == -ERESTARTSYS);
+
+ if (unlikely(ret != 0)) {
+ vmw_execbuf_unpin_panic(dev_priv);
+ goto out_no_reserve;
+ }
+
+ ret = vmw_fifo_emit_dummy_query(dev_priv, dev_priv->query_cid);
+ if (unlikely(ret != 0)) {
+ vmw_execbuf_unpin_panic(dev_priv);
+ goto out_no_emit;
+ }
+
+ vmw_bo_pin(dev_priv->pinned_bo, false);
+ vmw_bo_pin(dev_priv->dummy_query_bo, false);
+ dev_priv->dummy_query_bo_pinned = false;
+
+ (void) vmw_execbuf_fence_commands(NULL, dev_priv, &fence, NULL);
+ ttm_eu_fence_buffer_objects(&validate_list, (void *) fence);
+
+ ttm_bo_unref(&query_val.bo);
+ ttm_bo_unref(&pinned_val.bo);
+ ttm_bo_unref(&dev_priv->pinned_bo);
+
+out_unlock:
+ mutex_unlock(&dev_priv->cmdbuf_mutex);
+ return;
+
+out_no_emit:
+ ttm_eu_backoff_reservation(&validate_list);
+out_no_reserve:
+ ttm_bo_unref(&query_val.bo);
+ ttm_bo_unref(&pinned_val.bo);
+ ttm_bo_unref(&dev_priv->pinned_bo);
+ mutex_unlock(&dev_priv->cmdbuf_mutex);
+}
+
+
+int vmw_execbuf_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_vmw_execbuf_arg *arg = (struct drm_vmw_execbuf_arg *)data;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
+ int ret;
+
+ /*
+ * This will allow us to extend the ioctl argument while
+ * maintaining backwards compatibility:
+ * We take different code paths depending on the value of
+ * arg->version.
+ */
+
+ if (unlikely(arg->version != DRM_VMW_EXECBUF_VERSION)) {
+ DRM_ERROR("Incorrect execbuf version.\n");
+ DRM_ERROR("You're running outdated experimental "
+ "vmwgfx user-space drivers.");
+ return -EINVAL;
+ }
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ret = vmw_execbuf_process(file_priv, dev_priv,
+ (void __user *)(unsigned long)arg->commands,
+ NULL, arg->command_size, arg->throttle_us,
+ (void __user *)(unsigned long)arg->fence_rep);
+
+ if (unlikely(ret != 0))
+ goto out_unlock;
+
+ vmw_kms_cursor_post_execbuf(dev_priv);
+
+out_unlock:
ttm_read_unlock(&vmaster->lock);
return ret;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index bfab60c..070797b 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -158,10 +158,14 @@
{
struct vmw_fb_par *par = info->par;
struct vmw_private *vmw_priv = par->vmw_priv;
+ int ret;
- vmw_kms_write_svga(vmw_priv, info->var.xres, info->var.yres,
- info->fix.line_length,
- par->bpp, par->depth);
+ ret = vmw_kms_write_svga(vmw_priv, info->var.xres, info->var.yres,
+ info->fix.line_length,
+ par->bpp, par->depth);
+ if (ret)
+ return ret;
+
if (vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) {
/* TODO check if pitch and offset changes */
vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
@@ -405,14 +409,14 @@
struct fb_info *info;
unsigned initial_width, initial_height;
unsigned fb_width, fb_height;
- unsigned fb_bbp, fb_depth, fb_offset, fb_pitch, fb_size;
+ unsigned fb_bpp, fb_depth, fb_offset, fb_pitch, fb_size;
int ret;
/* XXX These shouldn't be hardcoded. */
initial_width = 800;
initial_height = 600;
- fb_bbp = 32;
+ fb_bpp = 32;
fb_depth = 24;
/* XXX As shouldn't these be as well. */
@@ -422,7 +426,7 @@
initial_width = min(fb_width, initial_width);
initial_height = min(fb_height, initial_height);
- fb_pitch = fb_width * fb_bbp / 8;
+ fb_pitch = fb_width * fb_bpp / 8;
fb_size = fb_pitch * fb_height;
fb_offset = vmw_read(vmw_priv, SVGA_REG_FB_OFFSET);
@@ -437,7 +441,7 @@
par = info->par;
par->vmw_priv = vmw_priv;
par->depth = fb_depth;
- par->bpp = fb_bbp;
+ par->bpp = fb_bpp;
par->vmalloc = NULL;
par->max_width = fb_width;
par->max_height = fb_height;
@@ -588,58 +592,6 @@
return 0;
}
-int vmw_dmabuf_from_vram(struct vmw_private *vmw_priv,
- struct vmw_dma_buffer *vmw_bo)
-{
- struct ttm_buffer_object *bo = &vmw_bo->base;
- int ret = 0;
-
- ret = ttm_bo_reserve(bo, false, false, false, 0);
- if (unlikely(ret != 0))
- return ret;
-
- ret = ttm_bo_validate(bo, &vmw_sys_placement, false, false, false);
- ttm_bo_unreserve(bo);
-
- return ret;
-}
-
-int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv,
- struct vmw_dma_buffer *vmw_bo)
-{
- struct ttm_buffer_object *bo = &vmw_bo->base;
- struct ttm_placement ne_placement = vmw_vram_ne_placement;
- int ret = 0;
-
- ne_placement.lpfn = bo->num_pages;
-
- /* interuptable? */
- ret = ttm_write_lock(&vmw_priv->active_master->lock, false);
- if (unlikely(ret != 0))
- return ret;
-
- ret = ttm_bo_reserve(bo, false, false, false, 0);
- if (unlikely(ret != 0))
- goto err_unlock;
-
- if (bo->mem.mem_type == TTM_PL_VRAM &&
- bo->mem.start < bo->num_pages &&
- bo->mem.start > 0)
- (void) ttm_bo_validate(bo, &vmw_sys_placement, false,
- false, false);
-
- ret = ttm_bo_validate(bo, &ne_placement, false, false, false);
-
- /* Could probably bug on */
- WARN_ON(bo->offset != 0);
-
- ttm_bo_unreserve(bo);
-err_unlock:
- ttm_write_unlock(&vmw_priv->active_master->lock);
-
- return ret;
-}
-
int vmw_fb_off(struct vmw_private *vmw_priv)
{
struct fb_info *info;
@@ -661,7 +613,7 @@
par->bo_ptr = NULL;
ttm_bo_kunmap(&par->map);
- vmw_dmabuf_from_vram(vmw_priv, par->vmw_bo);
+ vmw_dmabuf_unpin(vmw_priv, par->vmw_bo, false);
return 0;
}
@@ -687,7 +639,7 @@
/* Make sure that all overlays are stoped when we take over */
vmw_overlay_stop_all(vmw_priv);
- ret = vmw_dmabuf_to_start_of_vram(vmw_priv, par->vmw_bo);
+ ret = vmw_dmabuf_to_start_of_vram(vmw_priv, par->vmw_bo, true, false);
if (unlikely(ret != 0)) {
DRM_ERROR("could not move buffer to start of VRAM\n");
goto err_no_buffer;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
index 61eacc1..15fb260 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -1,6 +1,6 @@
/**************************************************************************
*
- * Copyright (C) 2010 VMware, Inc., Palo Alto, CA., USA
+ * Copyright © 2011 VMware, Inc., Palo Alto, CA., USA
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
@@ -25,149 +25,1100 @@
*
**************************************************************************/
-
+#include "drmP.h"
#include "vmwgfx_drv.h"
-struct vmw_fence {
- struct list_head head;
- uint32_t sequence;
- struct timespec submitted;
+#define VMW_FENCE_WRAP (1 << 31)
+
+struct vmw_fence_manager {
+ int num_fence_objects;
+ struct vmw_private *dev_priv;
+ spinlock_t lock;
+ struct list_head fence_list;
+ struct work_struct work;
+ u32 user_fence_size;
+ u32 fence_size;
+ u32 event_fence_action_size;
+ bool fifo_down;
+ struct list_head cleanup_list;
+ uint32_t pending_actions[VMW_ACTION_MAX];
+ struct mutex goal_irq_mutex;
+ bool goal_irq_on; /* Protected by @goal_irq_mutex */
+ bool seqno_valid; /* Protected by @lock, and may not be set to true
+ without the @goal_irq_mutex held. */
};
-void vmw_fence_queue_init(struct vmw_fence_queue *queue)
-{
- INIT_LIST_HEAD(&queue->head);
- queue->lag = ns_to_timespec(0);
- getrawmonotonic(&queue->lag_time);
- spin_lock_init(&queue->lock);
-}
+struct vmw_user_fence {
+ struct ttm_base_object base;
+ struct vmw_fence_obj fence;
+};
-void vmw_fence_queue_takedown(struct vmw_fence_queue *queue)
-{
- struct vmw_fence *fence, *next;
+/**
+ * struct vmw_event_fence_action - fence action that delivers a drm event.
+ *
+ * @e: A struct drm_pending_event that controls the event delivery.
+ * @action: A struct vmw_fence_action to hook up to a fence.
+ * @fence: A referenced pointer to the fence to keep it alive while @action
+ * hangs on it.
+ * @dev: Pointer to a struct drm_device so we can access the event stuff.
+ * @kref: Both @e and @action has destructors, so we need to refcount.
+ * @size: Size accounted for this object.
+ * @tv_sec: If non-null, the variable pointed to will be assigned
+ * current time tv_sec val when the fence signals.
+ * @tv_usec: Must be set if @tv_sec is set, and the variable pointed to will
+ * be assigned the current time tv_usec val when the fence signals.
+ */
+struct vmw_event_fence_action {
+ struct drm_pending_event e;
+ struct vmw_fence_action action;
+ struct vmw_fence_obj *fence;
+ struct drm_device *dev;
+ struct kref kref;
+ uint32_t size;
+ uint32_t *tv_sec;
+ uint32_t *tv_usec;
+};
- spin_lock(&queue->lock);
- list_for_each_entry_safe(fence, next, &queue->head, head) {
+/**
+ * Note on fencing subsystem usage of irqs:
+ * Typically the vmw_fences_update function is called
+ *
+ * a) When a new fence seqno has been submitted by the fifo code.
+ * b) On-demand when we have waiters. Sleeping waiters will switch on the
+ * ANY_FENCE irq and call vmw_fences_update function each time an ANY_FENCE
+ * irq is received. When the last fence waiter is gone, that IRQ is masked
+ * away.
+ *
+ * In situations where there are no waiters and we don't submit any new fences,
+ * fence objects may not be signaled. This is perfectly OK, since there are
+ * no consumers of the signaled data, but that is NOT ok when there are fence
+ * actions attached to a fence. The fencing subsystem then makes use of the
+ * FENCE_GOAL irq and sets the fence goal seqno to that of the next fence
+ * which has an action attached, and each time vmw_fences_update is called,
+ * the subsystem makes sure the fence goal seqno is updated.
+ *
+ * The fence goal seqno irq is on as long as there are unsignaled fence
+ * objects with actions attached to them.
+ */
+
+static void vmw_fence_obj_destroy_locked(struct kref *kref)
+{
+ struct vmw_fence_obj *fence =
+ container_of(kref, struct vmw_fence_obj, kref);
+
+ struct vmw_fence_manager *fman = fence->fman;
+ unsigned int num_fences;
+
+ list_del_init(&fence->head);
+ num_fences = --fman->num_fence_objects;
+ spin_unlock_irq(&fman->lock);
+ if (fence->destroy)
+ fence->destroy(fence);
+ else
kfree(fence);
- }
- spin_unlock(&queue->lock);
+
+ spin_lock_irq(&fman->lock);
}
-int vmw_fence_push(struct vmw_fence_queue *queue,
- uint32_t sequence)
+
+/**
+ * Execute signal actions on fences recently signaled.
+ * This is done from a workqueue so we don't have to execute
+ * signal actions from atomic context.
+ */
+
+static void vmw_fence_work_func(struct work_struct *work)
{
- struct vmw_fence *fence = kmalloc(sizeof(*fence), GFP_KERNEL);
+ struct vmw_fence_manager *fman =
+ container_of(work, struct vmw_fence_manager, work);
+ struct list_head list;
+ struct vmw_fence_action *action, *next_action;
+ bool seqno_valid;
- if (unlikely(!fence))
- return -ENOMEM;
+ do {
+ INIT_LIST_HEAD(&list);
+ mutex_lock(&fman->goal_irq_mutex);
- fence->sequence = sequence;
- getrawmonotonic(&fence->submitted);
- spin_lock(&queue->lock);
- list_add_tail(&fence->head, &queue->head);
- spin_unlock(&queue->lock);
+ spin_lock_irq(&fman->lock);
+ list_splice_init(&fman->cleanup_list, &list);
+ seqno_valid = fman->seqno_valid;
+ spin_unlock_irq(&fman->lock);
- return 0;
+ if (!seqno_valid && fman->goal_irq_on) {
+ fman->goal_irq_on = false;
+ vmw_goal_waiter_remove(fman->dev_priv);
+ }
+ mutex_unlock(&fman->goal_irq_mutex);
+
+ if (list_empty(&list))
+ return;
+
+ /*
+ * At this point, only we should be able to manipulate the
+ * list heads of the actions we have on the private list.
+ * hence fman::lock not held.
+ */
+
+ list_for_each_entry_safe(action, next_action, &list, head) {
+ list_del_init(&action->head);
+ if (action->cleanup)
+ action->cleanup(action);
+ }
+ } while (1);
}
-int vmw_fence_pull(struct vmw_fence_queue *queue,
- uint32_t signaled_sequence)
+struct vmw_fence_manager *vmw_fence_manager_init(struct vmw_private *dev_priv)
{
- struct vmw_fence *fence, *next;
- struct timespec now;
- bool updated = false;
+ struct vmw_fence_manager *fman = kzalloc(sizeof(*fman), GFP_KERNEL);
- spin_lock(&queue->lock);
- getrawmonotonic(&now);
+ if (unlikely(fman == NULL))
+ return NULL;
- if (list_empty(&queue->head)) {
- queue->lag = ns_to_timespec(0);
- queue->lag_time = now;
- updated = true;
+ fman->dev_priv = dev_priv;
+ spin_lock_init(&fman->lock);
+ INIT_LIST_HEAD(&fman->fence_list);
+ INIT_LIST_HEAD(&fman->cleanup_list);
+ INIT_WORK(&fman->work, &vmw_fence_work_func);
+ fman->fifo_down = true;
+ fman->user_fence_size = ttm_round_pot(sizeof(struct vmw_user_fence));
+ fman->fence_size = ttm_round_pot(sizeof(struct vmw_fence_obj));
+ fman->event_fence_action_size =
+ ttm_round_pot(sizeof(struct vmw_event_fence_action));
+ mutex_init(&fman->goal_irq_mutex);
+
+ return fman;
+}
+
+void vmw_fence_manager_takedown(struct vmw_fence_manager *fman)
+{
+ unsigned long irq_flags;
+ bool lists_empty;
+
+ (void) cancel_work_sync(&fman->work);
+
+ spin_lock_irqsave(&fman->lock, irq_flags);
+ lists_empty = list_empty(&fman->fence_list) &&
+ list_empty(&fman->cleanup_list);
+ spin_unlock_irqrestore(&fman->lock, irq_flags);
+
+ BUG_ON(!lists_empty);
+ kfree(fman);
+}
+
+static int vmw_fence_obj_init(struct vmw_fence_manager *fman,
+ struct vmw_fence_obj *fence,
+ u32 seqno,
+ uint32_t mask,
+ void (*destroy) (struct vmw_fence_obj *fence))
+{
+ unsigned long irq_flags;
+ unsigned int num_fences;
+ int ret = 0;
+
+ fence->seqno = seqno;
+ INIT_LIST_HEAD(&fence->seq_passed_actions);
+ fence->fman = fman;
+ fence->signaled = 0;
+ fence->signal_mask = mask;
+ kref_init(&fence->kref);
+ fence->destroy = destroy;
+ init_waitqueue_head(&fence->queue);
+
+ spin_lock_irqsave(&fman->lock, irq_flags);
+ if (unlikely(fman->fifo_down)) {
+ ret = -EBUSY;
goto out_unlock;
}
-
- list_for_each_entry_safe(fence, next, &queue->head, head) {
- if (signaled_sequence - fence->sequence > (1 << 30))
- continue;
-
- queue->lag = timespec_sub(now, fence->submitted);
- queue->lag_time = now;
- updated = true;
- list_del(&fence->head);
- kfree(fence);
- }
+ list_add_tail(&fence->head, &fman->fence_list);
+ num_fences = ++fman->num_fence_objects;
out_unlock:
- spin_unlock(&queue->lock);
+ spin_unlock_irqrestore(&fman->lock, irq_flags);
+ return ret;
- return (updated) ? 0 : -EBUSY;
}
-static struct timespec vmw_timespec_add(struct timespec t1,
- struct timespec t2)
+struct vmw_fence_obj *vmw_fence_obj_reference(struct vmw_fence_obj *fence)
{
- t1.tv_sec += t2.tv_sec;
- t1.tv_nsec += t2.tv_nsec;
- if (t1.tv_nsec >= 1000000000L) {
- t1.tv_sec += 1;
- t1.tv_nsec -= 1000000000L;
+ if (unlikely(fence == NULL))
+ return NULL;
+
+ kref_get(&fence->kref);
+ return fence;
+}
+
+/**
+ * vmw_fence_obj_unreference
+ *
+ * Note that this function may not be entered with disabled irqs since
+ * it may re-enable them in the destroy function.
+ *
+ */
+void vmw_fence_obj_unreference(struct vmw_fence_obj **fence_p)
+{
+ struct vmw_fence_obj *fence = *fence_p;
+ struct vmw_fence_manager *fman;
+
+ if (unlikely(fence == NULL))
+ return;
+
+ fman = fence->fman;
+ *fence_p = NULL;
+ spin_lock_irq(&fman->lock);
+ BUG_ON(atomic_read(&fence->kref.refcount) == 0);
+ kref_put(&fence->kref, vmw_fence_obj_destroy_locked);
+ spin_unlock_irq(&fman->lock);
+}
+
+void vmw_fences_perform_actions(struct vmw_fence_manager *fman,
+ struct list_head *list)
+{
+ struct vmw_fence_action *action, *next_action;
+
+ list_for_each_entry_safe(action, next_action, list, head) {
+ list_del_init(&action->head);
+ fman->pending_actions[action->type]--;
+ if (action->seq_passed != NULL)
+ action->seq_passed(action);
+
+ /*
+ * Add the cleanup action to the cleanup list so that
+ * it will be performed by a worker task.
+ */
+
+ list_add_tail(&action->head, &fman->cleanup_list);
+ }
+}
+
+/**
+ * vmw_fence_goal_new_locked - Figure out a new device fence goal
+ * seqno if needed.
+ *
+ * @fman: Pointer to a fence manager.
+ * @passed_seqno: The seqno the device currently signals as passed.
+ *
+ * This function should be called with the fence manager lock held.
+ * It is typically called when we have a new passed_seqno, and
+ * we might need to update the fence goal. It checks to see whether
+ * the current fence goal has already passed, and, in that case,
+ * scans through all unsignaled fences to get the next fence object with an
+ * action attached, and sets the seqno of that fence as a new fence goal.
+ *
+ * returns true if the device goal seqno was updated. False otherwise.
+ */
+static bool vmw_fence_goal_new_locked(struct vmw_fence_manager *fman,
+ u32 passed_seqno)
+{
+ u32 goal_seqno;
+ __le32 __iomem *fifo_mem;
+ struct vmw_fence_obj *fence;
+
+ if (likely(!fman->seqno_valid))
+ return false;
+
+ fifo_mem = fman->dev_priv->mmio_virt;
+ goal_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE_GOAL);
+ if (likely(passed_seqno - goal_seqno >= VMW_FENCE_WRAP))
+ return false;
+
+ fman->seqno_valid = false;
+ list_for_each_entry(fence, &fman->fence_list, head) {
+ if (!list_empty(&fence->seq_passed_actions)) {
+ fman->seqno_valid = true;
+ iowrite32(fence->seqno,
+ fifo_mem + SVGA_FIFO_FENCE_GOAL);
+ break;
+ }
}
- return t1;
-}
-
-static struct timespec vmw_fifo_lag(struct vmw_fence_queue *queue)
-{
- struct timespec now;
-
- spin_lock(&queue->lock);
- getrawmonotonic(&now);
- queue->lag = vmw_timespec_add(queue->lag,
- timespec_sub(now, queue->lag_time));
- queue->lag_time = now;
- spin_unlock(&queue->lock);
- return queue->lag;
+ return true;
}
-static bool vmw_lag_lt(struct vmw_fence_queue *queue,
- uint32_t us)
+/**
+ * vmw_fence_goal_check_locked - Replace the device fence goal seqno if
+ * needed.
+ *
+ * @fence: Pointer to a struct vmw_fence_obj the seqno of which should be
+ * considered as a device fence goal.
+ *
+ * This function should be called with the fence manager lock held.
+ * It is typically called when an action has been attached to a fence to
+ * check whether the seqno of that fence should be used for a fence
+ * goal interrupt. This is typically needed if the current fence goal is
+ * invalid, or has a higher seqno than that of the current fence object.
+ *
+ * returns true if the device goal seqno was updated. False otherwise.
+ */
+static bool vmw_fence_goal_check_locked(struct vmw_fence_obj *fence)
{
- struct timespec lag, cond;
+ u32 goal_seqno;
+ __le32 __iomem *fifo_mem;
- cond = ns_to_timespec((s64) us * 1000);
- lag = vmw_fifo_lag(queue);
- return (timespec_compare(&lag, &cond) < 1);
+ if (fence->signaled & DRM_VMW_FENCE_FLAG_EXEC)
+ return false;
+
+ fifo_mem = fence->fman->dev_priv->mmio_virt;
+ goal_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE_GOAL);
+ if (likely(fence->fman->seqno_valid &&
+ goal_seqno - fence->seqno < VMW_FENCE_WRAP))
+ return false;
+
+ iowrite32(fence->seqno, fifo_mem + SVGA_FIFO_FENCE_GOAL);
+ fence->fman->seqno_valid = true;
+
+ return true;
}
-int vmw_wait_lag(struct vmw_private *dev_priv,
- struct vmw_fence_queue *queue, uint32_t us)
+void vmw_fences_update(struct vmw_fence_manager *fman)
{
- struct vmw_fence *fence;
- uint32_t sequence;
+ unsigned long flags;
+ struct vmw_fence_obj *fence, *next_fence;
+ struct list_head action_list;
+ bool needs_rerun;
+ uint32_t seqno, new_seqno;
+ __le32 __iomem *fifo_mem = fman->dev_priv->mmio_virt;
+
+ seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE);
+rerun:
+ spin_lock_irqsave(&fman->lock, flags);
+ list_for_each_entry_safe(fence, next_fence, &fman->fence_list, head) {
+ if (seqno - fence->seqno < VMW_FENCE_WRAP) {
+ list_del_init(&fence->head);
+ fence->signaled |= DRM_VMW_FENCE_FLAG_EXEC;
+ INIT_LIST_HEAD(&action_list);
+ list_splice_init(&fence->seq_passed_actions,
+ &action_list);
+ vmw_fences_perform_actions(fman, &action_list);
+ wake_up_all(&fence->queue);
+ } else
+ break;
+ }
+
+ needs_rerun = vmw_fence_goal_new_locked(fman, seqno);
+
+ if (!list_empty(&fman->cleanup_list))
+ (void) schedule_work(&fman->work);
+ spin_unlock_irqrestore(&fman->lock, flags);
+
+ /*
+ * Rerun if the fence goal seqno was updated, and the
+ * hardware might have raced with that update, so that
+ * we missed a fence_goal irq.
+ */
+
+ if (unlikely(needs_rerun)) {
+ new_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE);
+ if (new_seqno != seqno) {
+ seqno = new_seqno;
+ goto rerun;
+ }
+ }
+}
+
+bool vmw_fence_obj_signaled(struct vmw_fence_obj *fence,
+ uint32_t flags)
+{
+ struct vmw_fence_manager *fman = fence->fman;
+ unsigned long irq_flags;
+ uint32_t signaled;
+
+ spin_lock_irqsave(&fman->lock, irq_flags);
+ signaled = fence->signaled;
+ spin_unlock_irqrestore(&fman->lock, irq_flags);
+
+ flags &= fence->signal_mask;
+ if ((signaled & flags) == flags)
+ return 1;
+
+ if ((signaled & DRM_VMW_FENCE_FLAG_EXEC) == 0)
+ vmw_fences_update(fman);
+
+ spin_lock_irqsave(&fman->lock, irq_flags);
+ signaled = fence->signaled;
+ spin_unlock_irqrestore(&fman->lock, irq_flags);
+
+ return ((signaled & flags) == flags);
+}
+
+int vmw_fence_obj_wait(struct vmw_fence_obj *fence,
+ uint32_t flags, bool lazy,
+ bool interruptible, unsigned long timeout)
+{
+ struct vmw_private *dev_priv = fence->fman->dev_priv;
+ long ret;
+
+ if (likely(vmw_fence_obj_signaled(fence, flags)))
+ return 0;
+
+ vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
+ vmw_seqno_waiter_add(dev_priv);
+
+ if (interruptible)
+ ret = wait_event_interruptible_timeout
+ (fence->queue,
+ vmw_fence_obj_signaled(fence, flags),
+ timeout);
+ else
+ ret = wait_event_timeout
+ (fence->queue,
+ vmw_fence_obj_signaled(fence, flags),
+ timeout);
+
+ vmw_seqno_waiter_remove(dev_priv);
+
+ if (unlikely(ret == 0))
+ ret = -EBUSY;
+ else if (likely(ret > 0))
+ ret = 0;
+
+ return ret;
+}
+
+void vmw_fence_obj_flush(struct vmw_fence_obj *fence)
+{
+ struct vmw_private *dev_priv = fence->fman->dev_priv;
+
+ vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
+}
+
+static void vmw_fence_destroy(struct vmw_fence_obj *fence)
+{
+ struct vmw_fence_manager *fman = fence->fman;
+
+ kfree(fence);
+ /*
+ * Free kernel space accounting.
+ */
+ ttm_mem_global_free(vmw_mem_glob(fman->dev_priv),
+ fman->fence_size);
+}
+
+int vmw_fence_create(struct vmw_fence_manager *fman,
+ uint32_t seqno,
+ uint32_t mask,
+ struct vmw_fence_obj **p_fence)
+{
+ struct ttm_mem_global *mem_glob = vmw_mem_glob(fman->dev_priv);
+ struct vmw_fence_obj *fence;
int ret;
- while (!vmw_lag_lt(queue, us)) {
- spin_lock(&queue->lock);
- if (list_empty(&queue->head))
- sequence = atomic_read(&dev_priv->fence_seq);
- else {
- fence = list_first_entry(&queue->head,
- struct vmw_fence, head);
- sequence = fence->sequence;
- }
- spin_unlock(&queue->lock);
+ ret = ttm_mem_global_alloc(mem_glob, fman->fence_size,
+ false, false);
+ if (unlikely(ret != 0))
+ return ret;
- ret = vmw_wait_fence(dev_priv, false, sequence, true,
- 3*HZ);
-
- if (unlikely(ret != 0))
- return ret;
-
- (void) vmw_fence_pull(queue, sequence);
+ fence = kzalloc(sizeof(*fence), GFP_KERNEL);
+ if (unlikely(fence == NULL)) {
+ ret = -ENOMEM;
+ goto out_no_object;
}
+
+ ret = vmw_fence_obj_init(fman, fence, seqno, mask,
+ vmw_fence_destroy);
+ if (unlikely(ret != 0))
+ goto out_err_init;
+
+ *p_fence = fence;
+ return 0;
+
+out_err_init:
+ kfree(fence);
+out_no_object:
+ ttm_mem_global_free(mem_glob, fman->fence_size);
+ return ret;
+}
+
+
+static void vmw_user_fence_destroy(struct vmw_fence_obj *fence)
+{
+ struct vmw_user_fence *ufence =
+ container_of(fence, struct vmw_user_fence, fence);
+ struct vmw_fence_manager *fman = fence->fman;
+
+ kfree(ufence);
+ /*
+ * Free kernel space accounting.
+ */
+ ttm_mem_global_free(vmw_mem_glob(fman->dev_priv),
+ fman->user_fence_size);
+}
+
+static void vmw_user_fence_base_release(struct ttm_base_object **p_base)
+{
+ struct ttm_base_object *base = *p_base;
+ struct vmw_user_fence *ufence =
+ container_of(base, struct vmw_user_fence, base);
+ struct vmw_fence_obj *fence = &ufence->fence;
+
+ *p_base = NULL;
+ vmw_fence_obj_unreference(&fence);
+}
+
+int vmw_user_fence_create(struct drm_file *file_priv,
+ struct vmw_fence_manager *fman,
+ uint32_t seqno,
+ uint32_t mask,
+ struct vmw_fence_obj **p_fence,
+ uint32_t *p_handle)
+{
+ struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ struct vmw_user_fence *ufence;
+ struct vmw_fence_obj *tmp;
+ struct ttm_mem_global *mem_glob = vmw_mem_glob(fman->dev_priv);
+ int ret;
+
+ /*
+ * Kernel memory space accounting, since this object may
+ * be created by a user-space request.
+ */
+
+ ret = ttm_mem_global_alloc(mem_glob, fman->user_fence_size,
+ false, false);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ufence = kzalloc(sizeof(*ufence), GFP_KERNEL);
+ if (unlikely(ufence == NULL)) {
+ ret = -ENOMEM;
+ goto out_no_object;
+ }
+
+ ret = vmw_fence_obj_init(fman, &ufence->fence, seqno,
+ mask, vmw_user_fence_destroy);
+ if (unlikely(ret != 0)) {
+ kfree(ufence);
+ goto out_no_object;
+ }
+
+ /*
+ * The base object holds a reference which is freed in
+ * vmw_user_fence_base_release.
+ */
+ tmp = vmw_fence_obj_reference(&ufence->fence);
+ ret = ttm_base_object_init(tfile, &ufence->base, false,
+ VMW_RES_FENCE,
+ &vmw_user_fence_base_release, NULL);
+
+
+ if (unlikely(ret != 0)) {
+ /*
+ * Free the base object's reference
+ */
+ vmw_fence_obj_unreference(&tmp);
+ goto out_err;
+ }
+
+ *p_fence = &ufence->fence;
+ *p_handle = ufence->base.hash.key;
+
+ return 0;
+out_err:
+ tmp = &ufence->fence;
+ vmw_fence_obj_unreference(&tmp);
+out_no_object:
+ ttm_mem_global_free(mem_glob, fman->user_fence_size);
+ return ret;
+}
+
+
+/**
+ * vmw_fence_fifo_down - signal all unsignaled fence objects.
+ */
+
+void vmw_fence_fifo_down(struct vmw_fence_manager *fman)
+{
+ unsigned long irq_flags;
+ struct list_head action_list;
+ int ret;
+
+ /*
+ * The list may be altered while we traverse it, so always
+ * restart when we've released the fman->lock.
+ */
+
+ spin_lock_irqsave(&fman->lock, irq_flags);
+ fman->fifo_down = true;
+ while (!list_empty(&fman->fence_list)) {
+ struct vmw_fence_obj *fence =
+ list_entry(fman->fence_list.prev, struct vmw_fence_obj,
+ head);
+ kref_get(&fence->kref);
+ spin_unlock_irq(&fman->lock);
+
+ ret = vmw_fence_obj_wait(fence, fence->signal_mask,
+ false, false,
+ VMW_FENCE_WAIT_TIMEOUT);
+
+ if (unlikely(ret != 0)) {
+ list_del_init(&fence->head);
+ fence->signaled |= DRM_VMW_FENCE_FLAG_EXEC;
+ INIT_LIST_HEAD(&action_list);
+ list_splice_init(&fence->seq_passed_actions,
+ &action_list);
+ vmw_fences_perform_actions(fman, &action_list);
+ wake_up_all(&fence->queue);
+ }
+
+ spin_lock_irq(&fman->lock);
+
+ BUG_ON(!list_empty(&fence->head));
+ kref_put(&fence->kref, vmw_fence_obj_destroy_locked);
+ }
+ spin_unlock_irqrestore(&fman->lock, irq_flags);
+}
+
+void vmw_fence_fifo_up(struct vmw_fence_manager *fman)
+{
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&fman->lock, irq_flags);
+ fman->fifo_down = false;
+ spin_unlock_irqrestore(&fman->lock, irq_flags);
+}
+
+
+int vmw_fence_obj_wait_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_vmw_fence_wait_arg *arg =
+ (struct drm_vmw_fence_wait_arg *)data;
+ unsigned long timeout;
+ struct ttm_base_object *base;
+ struct vmw_fence_obj *fence;
+ struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ int ret;
+ uint64_t wait_timeout = ((uint64_t)arg->timeout_us * HZ);
+
+ /*
+ * 64-bit division not present on 32-bit systems, so do an
+ * approximation. (Divide by 1000000).
+ */
+
+ wait_timeout = (wait_timeout >> 20) + (wait_timeout >> 24) -
+ (wait_timeout >> 26);
+
+ if (!arg->cookie_valid) {
+ arg->cookie_valid = 1;
+ arg->kernel_cookie = jiffies + wait_timeout;
+ }
+
+ base = ttm_base_object_lookup(tfile, arg->handle);
+ if (unlikely(base == NULL)) {
+ printk(KERN_ERR "Wait invalid fence object handle "
+ "0x%08lx.\n",
+ (unsigned long)arg->handle);
+ return -EINVAL;
+ }
+
+ fence = &(container_of(base, struct vmw_user_fence, base)->fence);
+
+ timeout = jiffies;
+ if (time_after_eq(timeout, (unsigned long)arg->kernel_cookie)) {
+ ret = ((vmw_fence_obj_signaled(fence, arg->flags)) ?
+ 0 : -EBUSY);
+ goto out;
+ }
+
+ timeout = (unsigned long)arg->kernel_cookie - timeout;
+
+ ret = vmw_fence_obj_wait(fence, arg->flags, arg->lazy, true, timeout);
+
+out:
+ ttm_base_object_unref(&base);
+
+ /*
+ * Optionally unref the fence object.
+ */
+
+ if (ret == 0 && (arg->wait_options & DRM_VMW_WAIT_OPTION_UNREF))
+ return ttm_ref_object_base_unref(tfile, arg->handle,
+ TTM_REF_USAGE);
+ return ret;
+}
+
+int vmw_fence_obj_signaled_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_vmw_fence_signaled_arg *arg =
+ (struct drm_vmw_fence_signaled_arg *) data;
+ struct ttm_base_object *base;
+ struct vmw_fence_obj *fence;
+ struct vmw_fence_manager *fman;
+ struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ struct vmw_private *dev_priv = vmw_priv(dev);
+
+ base = ttm_base_object_lookup(tfile, arg->handle);
+ if (unlikely(base == NULL)) {
+ printk(KERN_ERR "Fence signaled invalid fence object handle "
+ "0x%08lx.\n",
+ (unsigned long)arg->handle);
+ return -EINVAL;
+ }
+
+ fence = &(container_of(base, struct vmw_user_fence, base)->fence);
+ fman = fence->fman;
+
+ arg->signaled = vmw_fence_obj_signaled(fence, arg->flags);
+ spin_lock_irq(&fman->lock);
+
+ arg->signaled_flags = fence->signaled;
+ arg->passed_seqno = dev_priv->last_read_seqno;
+ spin_unlock_irq(&fman->lock);
+
+ ttm_base_object_unref(&base);
+
return 0;
}
+int vmw_fence_obj_unref_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_vmw_fence_arg *arg =
+ (struct drm_vmw_fence_arg *) data;
+
+ return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
+ arg->handle,
+ TTM_REF_USAGE);
+}
+
+/**
+ * vmw_event_fence_action_destroy
+ *
+ * @kref: The struct kref embedded in a struct vmw_event_fence_action.
+ *
+ * The vmw_event_fence_action destructor that may be called either after
+ * the fence action cleanup, or when the event is delivered.
+ * It frees both the vmw_event_fence_action struct and the actual
+ * event structure copied to user-space.
+ */
+static void vmw_event_fence_action_destroy(struct kref *kref)
+{
+ struct vmw_event_fence_action *eaction =
+ container_of(kref, struct vmw_event_fence_action, kref);
+ struct ttm_mem_global *mem_glob =
+ vmw_mem_glob(vmw_priv(eaction->dev));
+ uint32_t size = eaction->size;
+
+ kfree(eaction->e.event);
+ kfree(eaction);
+ ttm_mem_global_free(mem_glob, size);
+}
+
+
+/**
+ * vmw_event_fence_action_delivered
+ *
+ * @e: The struct drm_pending_event embedded in a struct
+ * vmw_event_fence_action.
+ *
+ * The struct drm_pending_event destructor that is called by drm
+ * once the event is delivered. Since we don't know whether this function
+ * will be called before or after the fence action destructor, we
+ * free a refcount and destroy if it becomes zero.
+ */
+static void vmw_event_fence_action_delivered(struct drm_pending_event *e)
+{
+ struct vmw_event_fence_action *eaction =
+ container_of(e, struct vmw_event_fence_action, e);
+
+ kref_put(&eaction->kref, vmw_event_fence_action_destroy);
+}
+
+
+/**
+ * vmw_event_fence_action_seq_passed
+ *
+ * @action: The struct vmw_fence_action embedded in a struct
+ * vmw_event_fence_action.
+ *
+ * This function is called when the seqno of the fence where @action is
+ * attached has passed. It queues the event on the submitter's event list.
+ * This function is always called from atomic context, and may be called
+ * from irq context. It ups a refcount reflecting that we now have two
+ * destructors.
+ */
+static void vmw_event_fence_action_seq_passed(struct vmw_fence_action *action)
+{
+ struct vmw_event_fence_action *eaction =
+ container_of(action, struct vmw_event_fence_action, action);
+ struct drm_device *dev = eaction->dev;
+ struct drm_file *file_priv = eaction->e.file_priv;
+ unsigned long irq_flags;
+
+ kref_get(&eaction->kref);
+ spin_lock_irqsave(&dev->event_lock, irq_flags);
+
+ if (likely(eaction->tv_sec != NULL)) {
+ struct timeval tv;
+
+ do_gettimeofday(&tv);
+ *eaction->tv_sec = tv.tv_sec;
+ *eaction->tv_usec = tv.tv_usec;
+ }
+
+ list_add_tail(&eaction->e.link, &file_priv->event_list);
+ wake_up_all(&file_priv->event_wait);
+ spin_unlock_irqrestore(&dev->event_lock, irq_flags);
+}
+
+/**
+ * vmw_event_fence_action_cleanup
+ *
+ * @action: The struct vmw_fence_action embedded in a struct
+ * vmw_event_fence_action.
+ *
+ * This function is the struct vmw_fence_action destructor. It's typically
+ * called from a workqueue.
+ */
+static void vmw_event_fence_action_cleanup(struct vmw_fence_action *action)
+{
+ struct vmw_event_fence_action *eaction =
+ container_of(action, struct vmw_event_fence_action, action);
+
+ vmw_fence_obj_unreference(&eaction->fence);
+ kref_put(&eaction->kref, vmw_event_fence_action_destroy);
+}
+
+
+/**
+ * vmw_fence_obj_add_action - Add an action to a fence object.
+ *
+ * @fence - The fence object.
+ * @action - The action to add.
+ *
+ * Note that the action callbacks may be executed before this function
+ * returns.
+ */
+void vmw_fence_obj_add_action(struct vmw_fence_obj *fence,
+ struct vmw_fence_action *action)
+{
+ struct vmw_fence_manager *fman = fence->fman;
+ unsigned long irq_flags;
+ bool run_update = false;
+
+ mutex_lock(&fman->goal_irq_mutex);
+ spin_lock_irqsave(&fman->lock, irq_flags);
+
+ fman->pending_actions[action->type]++;
+ if (fence->signaled & DRM_VMW_FENCE_FLAG_EXEC) {
+ struct list_head action_list;
+
+ INIT_LIST_HEAD(&action_list);
+ list_add_tail(&action->head, &action_list);
+ vmw_fences_perform_actions(fman, &action_list);
+ } else {
+ list_add_tail(&action->head, &fence->seq_passed_actions);
+
+ /*
+ * This function may set fman::seqno_valid, so it must
+ * be run with the goal_irq_mutex held.
+ */
+ run_update = vmw_fence_goal_check_locked(fence);
+ }
+
+ spin_unlock_irqrestore(&fman->lock, irq_flags);
+
+ if (run_update) {
+ if (!fman->goal_irq_on) {
+ fman->goal_irq_on = true;
+ vmw_goal_waiter_add(fman->dev_priv);
+ }
+ vmw_fences_update(fman);
+ }
+ mutex_unlock(&fman->goal_irq_mutex);
+
+}
+
+/**
+ * vmw_event_fence_action_create - Post an event for sending when a fence
+ * object seqno has passed.
+ *
+ * @file_priv: The file connection on which the event should be posted.
+ * @fence: The fence object on which to post the event.
+ * @event: Event to be posted. This event should've been alloced
+ * using k[mz]alloc, and should've been completely initialized.
+ * @interruptible: Interruptible waits if possible.
+ *
+ * As a side effect, the object pointed to by @event may have been
+ * freed when this function returns. If this function returns with
+ * an error code, the caller needs to free that object.
+ */
+
+int vmw_event_fence_action_create(struct drm_file *file_priv,
+ struct vmw_fence_obj *fence,
+ struct drm_event *event,
+ uint32_t *tv_sec,
+ uint32_t *tv_usec,
+ bool interruptible)
+{
+ struct vmw_event_fence_action *eaction;
+ struct ttm_mem_global *mem_glob =
+ vmw_mem_glob(fence->fman->dev_priv);
+ struct vmw_fence_manager *fman = fence->fman;
+ uint32_t size = fman->event_fence_action_size +
+ ttm_round_pot(event->length);
+ int ret;
+
+ /*
+ * Account for internal structure size as well as the
+ * event size itself.
+ */
+
+ ret = ttm_mem_global_alloc(mem_glob, size, false, interruptible);
+ if (unlikely(ret != 0))
+ return ret;
+
+ eaction = kzalloc(sizeof(*eaction), GFP_KERNEL);
+ if (unlikely(eaction == NULL)) {
+ ttm_mem_global_free(mem_glob, size);
+ return -ENOMEM;
+ }
+
+ eaction->e.event = event;
+ eaction->e.file_priv = file_priv;
+ eaction->e.destroy = vmw_event_fence_action_delivered;
+
+ eaction->action.seq_passed = vmw_event_fence_action_seq_passed;
+ eaction->action.cleanup = vmw_event_fence_action_cleanup;
+ eaction->action.type = VMW_ACTION_EVENT;
+
+ eaction->fence = vmw_fence_obj_reference(fence);
+ eaction->dev = fman->dev_priv->dev;
+ eaction->size = size;
+ eaction->tv_sec = tv_sec;
+ eaction->tv_usec = tv_usec;
+
+ kref_init(&eaction->kref);
+ vmw_fence_obj_add_action(fence, &eaction->action);
+
+ return 0;
+}
+
+int vmw_fence_event_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_vmw_fence_event_arg *arg =
+ (struct drm_vmw_fence_event_arg *) data;
+ struct vmw_fence_obj *fence = NULL;
+ struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
+ struct drm_vmw_fence_rep __user *user_fence_rep =
+ (struct drm_vmw_fence_rep __user *)(unsigned long)
+ arg->fence_rep;
+ uint32_t handle;
+ unsigned long irq_flags;
+ struct drm_vmw_event_fence *event;
+ int ret;
+
+ /*
+ * Look up an existing fence object,
+ * and if user-space wants a new reference,
+ * add one.
+ */
+ if (arg->handle) {
+ struct ttm_base_object *base =
+ ttm_base_object_lookup(vmw_fp->tfile, arg->handle);
+
+ if (unlikely(base == NULL)) {
+ DRM_ERROR("Fence event invalid fence object handle "
+ "0x%08lx.\n",
+ (unsigned long)arg->handle);
+ return -EINVAL;
+ }
+ fence = &(container_of(base, struct vmw_user_fence,
+ base)->fence);
+ (void) vmw_fence_obj_reference(fence);
+
+ if (user_fence_rep != NULL) {
+ bool existed;
+
+ ret = ttm_ref_object_add(vmw_fp->tfile, base,
+ TTM_REF_USAGE, &existed);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Failed to reference a fence "
+ "object.\n");
+ goto out_no_ref_obj;
+ }
+ handle = base->hash.key;
+ }
+ ttm_base_object_unref(&base);
+ }
+
+ /*
+ * Create a new fence object.
+ */
+ if (!fence) {
+ ret = vmw_execbuf_fence_commands(file_priv, dev_priv,
+ &fence,
+ (user_fence_rep) ?
+ &handle : NULL);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Fence event failed to create fence.\n");
+ return ret;
+ }
+ }
+
+ BUG_ON(fence == NULL);
+
+ spin_lock_irqsave(&dev->event_lock, irq_flags);
+
+ ret = (file_priv->event_space < sizeof(*event)) ? -EBUSY : 0;
+ if (likely(ret == 0))
+ file_priv->event_space -= sizeof(*event);
+
+ spin_unlock_irqrestore(&dev->event_lock, irq_flags);
+
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Failed to allocate event space for this file.\n");
+ goto out_no_event_space;
+ }
+
+ event = kzalloc(sizeof(*event), GFP_KERNEL);
+ if (unlikely(event == NULL)) {
+ DRM_ERROR("Failed to allocate an event.\n");
+ goto out_no_event;
+ }
+
+ event->base.type = DRM_VMW_EVENT_FENCE_SIGNALED;
+ event->base.length = sizeof(*event);
+ event->user_data = arg->user_data;
+
+ if (arg->flags & DRM_VMW_FE_FLAG_REQ_TIME)
+ ret = vmw_event_fence_action_create(file_priv, fence,
+ &event->base,
+ &event->tv_sec,
+ &event->tv_usec,
+ true);
+ else
+ ret = vmw_event_fence_action_create(file_priv, fence,
+ &event->base,
+ NULL,
+ NULL,
+ true);
+
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Failed to attach event to fence.\n");
+ goto out_no_attach;
+ }
+
+ vmw_execbuf_copy_fence_user(dev_priv, vmw_fp, 0, user_fence_rep, fence,
+ handle);
+ vmw_fence_obj_unreference(&fence);
+ return 0;
+out_no_attach:
+ kfree(event);
+out_no_event:
+ spin_lock_irqsave(&dev->event_lock, irq_flags);
+ file_priv->event_space += sizeof(*event);
+ spin_unlock_irqrestore(&dev->event_lock, irq_flags);
+out_no_event_space:
+ if (user_fence_rep != NULL)
+ ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
+ handle, TTM_REF_USAGE);
+out_no_ref_obj:
+ vmw_fence_obj_unreference(&fence);
+ return ret;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.h b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.h
new file mode 100644
index 0000000..0854a20
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.h
@@ -0,0 +1,113 @@
+/**************************************************************************
+ *
+ * Copyright © 2011 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#ifndef _VMWGFX_FENCE_H_
+
+#define VMW_FENCE_WAIT_TIMEOUT (5*HZ)
+
+struct vmw_private;
+
+struct vmw_fence_manager;
+
+/**
+ *
+ *
+ */
+enum vmw_action_type {
+ VMW_ACTION_EVENT = 0,
+ VMW_ACTION_MAX
+};
+
+struct vmw_fence_action {
+ struct list_head head;
+ enum vmw_action_type type;
+ void (*seq_passed) (struct vmw_fence_action *action);
+ void (*cleanup) (struct vmw_fence_action *action);
+};
+
+struct vmw_fence_obj {
+ struct kref kref;
+ u32 seqno;
+
+ struct vmw_fence_manager *fman;
+ struct list_head head;
+ uint32_t signaled;
+ uint32_t signal_mask;
+ struct list_head seq_passed_actions;
+ void (*destroy)(struct vmw_fence_obj *fence);
+ wait_queue_head_t queue;
+};
+
+extern struct vmw_fence_manager *
+vmw_fence_manager_init(struct vmw_private *dev_priv);
+
+extern void vmw_fence_manager_takedown(struct vmw_fence_manager *fman);
+
+extern void vmw_fence_obj_unreference(struct vmw_fence_obj **fence_p);
+
+extern struct vmw_fence_obj *
+vmw_fence_obj_reference(struct vmw_fence_obj *fence);
+
+extern void vmw_fences_update(struct vmw_fence_manager *fman);
+
+extern bool vmw_fence_obj_signaled(struct vmw_fence_obj *fence,
+ uint32_t flags);
+
+extern int vmw_fence_obj_wait(struct vmw_fence_obj *fence, uint32_t flags,
+ bool lazy,
+ bool interruptible, unsigned long timeout);
+
+extern void vmw_fence_obj_flush(struct vmw_fence_obj *fence);
+
+extern int vmw_fence_create(struct vmw_fence_manager *fman,
+ uint32_t seqno,
+ uint32_t mask,
+ struct vmw_fence_obj **p_fence);
+
+extern int vmw_user_fence_create(struct drm_file *file_priv,
+ struct vmw_fence_manager *fman,
+ uint32_t sequence,
+ uint32_t mask,
+ struct vmw_fence_obj **p_fence,
+ uint32_t *p_handle);
+
+extern void vmw_fence_fifo_up(struct vmw_fence_manager *fman);
+
+extern void vmw_fence_fifo_down(struct vmw_fence_manager *fman);
+
+extern int vmw_fence_obj_wait_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+extern int vmw_fence_obj_signaled_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+extern int vmw_fence_obj_unref_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+extern int vmw_fence_event_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+
+#endif /* _VMWGFX_FENCE_H_ */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index 635c0ff..03bbc2a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -45,7 +45,11 @@
if (hwversion == 0)
return false;
- if (hwversion < SVGA3D_HWVERSION_WS65_B1)
+ if (hwversion < SVGA3D_HWVERSION_WS8_B1)
+ return false;
+
+ /* Non-Screen Object path does not support surfaces */
+ if (!dev_priv->sou_priv)
return false;
return true;
@@ -72,22 +76,12 @@
uint32_t max;
uint32_t min;
uint32_t dummy;
- int ret;
fifo->static_buffer_size = VMWGFX_FIFO_STATIC_SIZE;
fifo->static_buffer = vmalloc(fifo->static_buffer_size);
if (unlikely(fifo->static_buffer == NULL))
return -ENOMEM;
- fifo->last_buffer_size = VMWGFX_FIFO_STATIC_SIZE;
- fifo->last_data_size = 0;
- fifo->last_buffer_add = false;
- fifo->last_buffer = vmalloc(fifo->last_buffer_size);
- if (unlikely(fifo->last_buffer == NULL)) {
- ret = -ENOMEM;
- goto out_err;
- }
-
fifo->dynamic_buffer = NULL;
fifo->reserved_size = 0;
fifo->using_bounce_buffer = false;
@@ -137,14 +131,10 @@
(unsigned int) min,
(unsigned int) fifo->capabilities);
- atomic_set(&dev_priv->fence_seq, dev_priv->last_read_sequence);
- iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE);
- vmw_fence_queue_init(&fifo->fence_queue);
+ atomic_set(&dev_priv->marker_seq, dev_priv->last_read_seqno);
+ iowrite32(dev_priv->last_read_seqno, fifo_mem + SVGA_FIFO_FENCE);
+ vmw_marker_queue_init(&fifo->marker_queue);
return vmw_fifo_send_fence(dev_priv, &dummy);
-out_err:
- vfree(fifo->static_buffer);
- fifo->static_buffer = NULL;
- return ret;
}
void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason)
@@ -170,7 +160,7 @@
while (vmw_read(dev_priv, SVGA_REG_BUSY) != 0)
vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
- dev_priv->last_read_sequence = ioread32(fifo_mem + SVGA_FIFO_FENCE);
+ dev_priv->last_read_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE);
vmw_write(dev_priv, SVGA_REG_CONFIG_DONE,
dev_priv->config_done_state);
@@ -180,12 +170,7 @@
dev_priv->traces_state);
mutex_unlock(&dev_priv->hw_mutex);
- vmw_fence_queue_takedown(&fifo->fence_queue);
-
- if (likely(fifo->last_buffer != NULL)) {
- vfree(fifo->last_buffer);
- fifo->last_buffer = NULL;
- }
+ vmw_marker_queue_takedown(&fifo->marker_queue);
if (likely(fifo->static_buffer != NULL)) {
vfree(fifo->static_buffer);
@@ -262,9 +247,8 @@
spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
outl(SVGA_IRQFLAG_FIFO_PROGRESS,
dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
- vmw_write(dev_priv, SVGA_REG_IRQMASK,
- vmw_read(dev_priv, SVGA_REG_IRQMASK) |
- SVGA_IRQFLAG_FIFO_PROGRESS);
+ dev_priv->irq_mask |= SVGA_IRQFLAG_FIFO_PROGRESS;
+ vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask);
spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
}
mutex_unlock(&dev_priv->hw_mutex);
@@ -286,9 +270,8 @@
mutex_lock(&dev_priv->hw_mutex);
if (atomic_dec_and_test(&dev_priv->fifo_queue_waiters)) {
spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
- vmw_write(dev_priv, SVGA_REG_IRQMASK,
- vmw_read(dev_priv, SVGA_REG_IRQMASK) &
- ~SVGA_IRQFLAG_FIFO_PROGRESS);
+ dev_priv->irq_mask &= ~SVGA_IRQFLAG_FIFO_PROGRESS;
+ vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask);
spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
}
mutex_unlock(&dev_priv->hw_mutex);
@@ -296,6 +279,16 @@
return ret;
}
+/**
+ * Reserve @bytes number of bytes in the fifo.
+ *
+ * This function will return NULL (error) on two conditions:
+ * If it timeouts waiting for fifo space, or if @bytes is larger than the
+ * available fifo space.
+ *
+ * Returns:
+ * Pointer to the fifo, or null on error (possible hardware hang).
+ */
void *vmw_fifo_reserve(struct vmw_private *dev_priv, uint32_t bytes)
{
struct vmw_fifo_state *fifo_state = &dev_priv->fifo;
@@ -466,7 +459,7 @@
mutex_unlock(&fifo_state->fifo_mutex);
}
-int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence)
+int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *seqno)
{
struct vmw_fifo_state *fifo_state = &dev_priv->fifo;
struct svga_fifo_cmd_fence *cmd_fence;
@@ -476,16 +469,16 @@
fm = vmw_fifo_reserve(dev_priv, bytes);
if (unlikely(fm == NULL)) {
- *sequence = atomic_read(&dev_priv->fence_seq);
+ *seqno = atomic_read(&dev_priv->marker_seq);
ret = -ENOMEM;
- (void)vmw_fallback_wait(dev_priv, false, true, *sequence,
+ (void)vmw_fallback_wait(dev_priv, false, true, *seqno,
false, 3*HZ);
goto out_err;
}
do {
- *sequence = atomic_add_return(1, &dev_priv->fence_seq);
- } while (*sequence == 0);
+ *seqno = atomic_add_return(1, &dev_priv->marker_seq);
+ } while (*seqno == 0);
if (!(fifo_state->capabilities & SVGA_FIFO_CAP_FENCE)) {
@@ -502,61 +495,68 @@
cmd_fence = (struct svga_fifo_cmd_fence *)
((unsigned long)fm + sizeof(__le32));
- iowrite32(*sequence, &cmd_fence->fence);
- fifo_state->last_buffer_add = true;
+ iowrite32(*seqno, &cmd_fence->fence);
vmw_fifo_commit(dev_priv, bytes);
- fifo_state->last_buffer_add = false;
- (void) vmw_fence_push(&fifo_state->fence_queue, *sequence);
- vmw_update_sequence(dev_priv, fifo_state);
+ (void) vmw_marker_push(&fifo_state->marker_queue, *seqno);
+ vmw_update_seqno(dev_priv, fifo_state);
out_err:
return ret;
}
/**
- * Map the first page of the FIFO read-only to user-space.
+ * vmw_fifo_emit_dummy_query - emits a dummy query to the fifo.
+ *
+ * @dev_priv: The device private structure.
+ * @cid: The hardware context id used for the query.
+ *
+ * This function is used to emit a dummy occlusion query with
+ * no primitives rendered between query begin and query end.
+ * It's used to provide a query barrier, in order to know that when
+ * this query is finished, all preceding queries are also finished.
+ *
+ * A Query results structure should have been initialized at the start
+ * of the dev_priv->dummy_query_bo buffer object. And that buffer object
+ * must also be either reserved or pinned when this function is called.
+ *
+ * Returns -ENOMEM on failure to reserve fifo space.
*/
-
-static int vmw_fifo_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+int vmw_fifo_emit_dummy_query(struct vmw_private *dev_priv,
+ uint32_t cid)
{
- int ret;
- unsigned long address = (unsigned long)vmf->virtual_address;
+ /*
+ * A query wait without a preceding query end will
+ * actually finish all queries for this cid
+ * without writing to the query result structure.
+ */
- if (address != vma->vm_start)
- return VM_FAULT_SIGBUS;
+ struct ttm_buffer_object *bo = dev_priv->dummy_query_bo;
+ struct {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdWaitForQuery body;
+ } *cmd;
- ret = vm_insert_pfn(vma, address, vma->vm_pgoff);
- if (likely(ret == -EBUSY || ret == 0))
- return VM_FAULT_NOPAGE;
- else if (ret == -ENOMEM)
- return VM_FAULT_OOM;
+ cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
- return VM_FAULT_SIGBUS;
-}
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Out of fifo space for dummy query.\n");
+ return -ENOMEM;
+ }
-static struct vm_operations_struct vmw_fifo_vm_ops = {
- .fault = vmw_fifo_vm_fault,
- .open = NULL,
- .close = NULL
-};
+ cmd->header.id = SVGA_3D_CMD_WAIT_FOR_QUERY;
+ cmd->header.size = sizeof(cmd->body);
+ cmd->body.cid = cid;
+ cmd->body.type = SVGA3D_QUERYTYPE_OCCLUSION;
-int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma)
-{
- struct drm_file *file_priv;
- struct vmw_private *dev_priv;
+ if (bo->mem.mem_type == TTM_PL_VRAM) {
+ cmd->body.guestResult.gmrId = SVGA_GMR_FRAMEBUFFER;
+ cmd->body.guestResult.offset = bo->offset;
+ } else {
+ cmd->body.guestResult.gmrId = bo->mem.start;
+ cmd->body.guestResult.offset = 0;
+ }
- file_priv = filp->private_data;
- dev_priv = vmw_priv(file_priv->minor->dev);
+ vmw_fifo_commit(dev_priv, sizeof(*cmd));
- if (vma->vm_pgoff != (dev_priv->mmio_start >> PAGE_SHIFT) ||
- (vma->vm_end - vma->vm_start) != PAGE_SIZE)
- return -EINVAL;
-
- vma->vm_flags &= ~(VM_WRITE | VM_MAYWRITE);
- vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_SHARED;
- vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
- vma->vm_page_prot = ttm_io_prot(TTM_PL_FLAG_UNCACHED,
- vma->vm_page_prot);
- vma->vm_ops = &vmw_fifo_vm_ops;
return 0;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gmr.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gmr.c
index de0c594..f4e7763 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_gmr.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gmr.c
@@ -1,6 +1,6 @@
/**************************************************************************
*
- * Copyright © 2009 VMware, Inc., Palo Alto, CA., USA
+ * Copyright © 2009-2011 VMware, Inc., Palo Alto, CA., USA
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
@@ -29,6 +29,77 @@
#include "drmP.h"
#include "ttm/ttm_bo_driver.h"
+#define VMW_PPN_SIZE sizeof(unsigned long)
+
+static int vmw_gmr2_bind(struct vmw_private *dev_priv,
+ struct page *pages[],
+ unsigned long num_pages,
+ int gmr_id)
+{
+ SVGAFifoCmdDefineGMR2 define_cmd;
+ SVGAFifoCmdRemapGMR2 remap_cmd;
+ uint32_t define_size = sizeof(define_cmd) + 4;
+ uint32_t remap_size = VMW_PPN_SIZE * num_pages + sizeof(remap_cmd) + 4;
+ uint32_t *cmd;
+ uint32_t *cmd_orig;
+ uint32_t i;
+
+ cmd_orig = cmd = vmw_fifo_reserve(dev_priv, define_size + remap_size);
+ if (unlikely(cmd == NULL))
+ return -ENOMEM;
+
+ define_cmd.gmrId = gmr_id;
+ define_cmd.numPages = num_pages;
+
+ remap_cmd.gmrId = gmr_id;
+ remap_cmd.flags = (VMW_PPN_SIZE > sizeof(*cmd)) ?
+ SVGA_REMAP_GMR2_PPN64 : SVGA_REMAP_GMR2_PPN32;
+ remap_cmd.offsetPages = 0;
+ remap_cmd.numPages = num_pages;
+
+ *cmd++ = SVGA_CMD_DEFINE_GMR2;
+ memcpy(cmd, &define_cmd, sizeof(define_cmd));
+ cmd += sizeof(define_cmd) / sizeof(uint32);
+
+ *cmd++ = SVGA_CMD_REMAP_GMR2;
+ memcpy(cmd, &remap_cmd, sizeof(remap_cmd));
+ cmd += sizeof(remap_cmd) / sizeof(uint32);
+
+ for (i = 0; i < num_pages; ++i) {
+ if (VMW_PPN_SIZE > 4)
+ *cmd = page_to_pfn(*pages++);
+ else
+ *((uint64_t *)cmd) = page_to_pfn(*pages++);
+
+ cmd += VMW_PPN_SIZE / sizeof(*cmd);
+ }
+
+ vmw_fifo_commit(dev_priv, define_size + remap_size);
+
+ return 0;
+}
+
+static void vmw_gmr2_unbind(struct vmw_private *dev_priv,
+ int gmr_id)
+{
+ SVGAFifoCmdDefineGMR2 define_cmd;
+ uint32_t define_size = sizeof(define_cmd) + 4;
+ uint32_t *cmd;
+
+ cmd = vmw_fifo_reserve(dev_priv, define_size);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("GMR2 unbind failed.\n");
+ return;
+ }
+ define_cmd.gmrId = gmr_id;
+ define_cmd.numPages = 0;
+
+ *cmd++ = SVGA_CMD_DEFINE_GMR2;
+ memcpy(cmd, &define_cmd, sizeof(define_cmd));
+
+ vmw_fifo_commit(dev_priv, define_size);
+}
+
/**
* FIXME: Adjust to the ttm lowmem / highmem storage to minimize
* the number of used descriptors.
@@ -170,6 +241,9 @@
struct list_head desc_pages;
int ret;
+ if (likely(dev_priv->capabilities & SVGA_CAP_GMR2))
+ return vmw_gmr2_bind(dev_priv, pages, num_pages, gmr_id);
+
if (unlikely(!(dev_priv->capabilities & SVGA_CAP_GMR)))
return -EINVAL;
@@ -192,6 +266,11 @@
void vmw_gmr_unbind(struct vmw_private *dev_priv, int gmr_id)
{
+ if (likely(dev_priv->capabilities & SVGA_CAP_GMR2)) {
+ vmw_gmr2_unbind(dev_priv, gmr_id);
+ return;
+ }
+
mutex_lock(&dev_priv->hw_mutex);
vmw_write(dev_priv, SVGA_REG_GMR_ID, gmr_id);
wmb();
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
index ac6e0d1..5f71715 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
@@ -40,6 +40,8 @@
spinlock_t lock;
struct ida gmr_ida;
uint32_t max_gmr_ids;
+ uint32_t max_gmr_pages;
+ uint32_t used_gmr_pages;
};
static int vmw_gmrid_man_get_node(struct ttm_mem_type_manager *man,
@@ -49,33 +51,50 @@
{
struct vmwgfx_gmrid_man *gman =
(struct vmwgfx_gmrid_man *)man->priv;
- int ret;
+ int ret = 0;
int id;
mem->mm_node = NULL;
+ spin_lock(&gman->lock);
+
+ if (gman->max_gmr_pages > 0) {
+ gman->used_gmr_pages += bo->num_pages;
+ if (unlikely(gman->used_gmr_pages > gman->max_gmr_pages))
+ goto out_err_locked;
+ }
+
do {
- if (unlikely(ida_pre_get(&gman->gmr_ida, GFP_KERNEL) == 0))
- return -ENOMEM;
-
+ spin_unlock(&gman->lock);
+ if (unlikely(ida_pre_get(&gman->gmr_ida, GFP_KERNEL) == 0)) {
+ ret = -ENOMEM;
+ goto out_err;
+ }
spin_lock(&gman->lock);
- ret = ida_get_new(&gman->gmr_ida, &id);
+ ret = ida_get_new(&gman->gmr_ida, &id);
if (unlikely(ret == 0 && id >= gman->max_gmr_ids)) {
ida_remove(&gman->gmr_ida, id);
- spin_unlock(&gman->lock);
- return 0;
+ ret = 0;
+ goto out_err_locked;
}
-
- spin_unlock(&gman->lock);
-
} while (ret == -EAGAIN);
if (likely(ret == 0)) {
mem->mm_node = gman;
mem->start = id;
- }
+ mem->num_pages = bo->num_pages;
+ } else
+ goto out_err_locked;
+ spin_unlock(&gman->lock);
+ return 0;
+
+out_err:
+ spin_lock(&gman->lock);
+out_err_locked:
+ gman->used_gmr_pages -= bo->num_pages;
+ spin_unlock(&gman->lock);
return ret;
}
@@ -88,6 +107,7 @@
if (mem->mm_node) {
spin_lock(&gman->lock);
ida_remove(&gman->gmr_ida, mem->start);
+ gman->used_gmr_pages -= mem->num_pages;
spin_unlock(&gman->lock);
mem->mm_node = NULL;
}
@@ -96,6 +116,8 @@
static int vmw_gmrid_man_init(struct ttm_mem_type_manager *man,
unsigned long p_size)
{
+ struct vmw_private *dev_priv =
+ container_of(man->bdev, struct vmw_private, bdev);
struct vmwgfx_gmrid_man *gman =
kzalloc(sizeof(*gman), GFP_KERNEL);
@@ -103,6 +125,8 @@
return -ENOMEM;
spin_lock_init(&gman->lock);
+ gman->max_gmr_pages = dev_priv->max_gmr_pages;
+ gman->used_gmr_pages = 0;
ida_init(&gman->gmr_ida);
gman->max_gmr_ids = p_size;
man->priv = (void *) gman;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
index 570d577..3f63435 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -27,6 +27,7 @@
#include "vmwgfx_drv.h"
#include "vmwgfx_drm.h"
+#include "vmwgfx_kms.h"
int vmw_getparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
@@ -45,9 +46,6 @@
case DRM_VMW_PARAM_3D:
param->value = vmw_fifo_have_3d(dev_priv) ? 1 : 0;
break;
- case DRM_VMW_PARAM_FIFO_OFFSET:
- param->value = dev_priv->mmio_start;
- break;
case DRM_VMW_PARAM_HW_CAPS:
param->value = dev_priv->capabilities;
break;
@@ -57,6 +55,13 @@
case DRM_VMW_PARAM_MAX_FB_SIZE:
param->value = dev_priv->vram_size;
break;
+ case DRM_VMW_PARAM_FIFO_HW_VERSION:
+ {
+ __le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+
+ param->value = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+ break;
+ }
default:
DRM_ERROR("Illegal vmwgfx get param request: %d\n",
param->param);
@@ -66,25 +71,259 @@
return 0;
}
-int vmw_fifo_debug_ioctl(struct drm_device *dev, void *data,
+
+int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ struct drm_vmw_get_3d_cap_arg *arg =
+ (struct drm_vmw_get_3d_cap_arg *) data;
struct vmw_private *dev_priv = vmw_priv(dev);
- struct vmw_fifo_state *fifo_state = &dev_priv->fifo;
- struct drm_vmw_fifo_debug_arg *arg =
- (struct drm_vmw_fifo_debug_arg *)data;
- __le32 __user *buffer = (__le32 __user *)
- (unsigned long)arg->debug_buffer;
+ uint32_t size;
+ __le32 __iomem *fifo_mem;
+ void __user *buffer = (void __user *)((unsigned long)(arg->buffer));
+ void *bounce;
+ int ret;
- if (unlikely(fifo_state->last_buffer == NULL))
+ if (unlikely(arg->pad64 != 0)) {
+ DRM_ERROR("Illegal GET_3D_CAP argument.\n");
return -EINVAL;
-
- if (arg->debug_buffer_size < fifo_state->last_data_size) {
- arg->used_size = arg->debug_buffer_size;
- arg->did_not_fit = 1;
- } else {
- arg->used_size = fifo_state->last_data_size;
- arg->did_not_fit = 0;
}
- return copy_to_user(buffer, fifo_state->last_buffer, arg->used_size);
+
+ size = (SVGA_FIFO_3D_CAPS_LAST - SVGA_FIFO_3D_CAPS + 1) << 2;
+
+ if (arg->max_size < size)
+ size = arg->max_size;
+
+ bounce = vmalloc(size);
+ if (unlikely(bounce == NULL)) {
+ DRM_ERROR("Failed to allocate bounce buffer for 3D caps.\n");
+ return -ENOMEM;
+ }
+
+ fifo_mem = dev_priv->mmio_virt;
+ memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size);
+
+ ret = copy_to_user(buffer, bounce, size);
+ vfree(bounce);
+
+ if (unlikely(ret != 0))
+ DRM_ERROR("Failed to report 3D caps info.\n");
+
+ return ret;
+}
+
+int vmw_present_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_vmw_present_arg *arg =
+ (struct drm_vmw_present_arg *)data;
+ struct vmw_surface *surface;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
+ struct drm_vmw_rect __user *clips_ptr;
+ struct drm_vmw_rect *clips = NULL;
+ struct drm_mode_object *obj;
+ struct vmw_framebuffer *vfb;
+ uint32_t num_clips;
+ int ret;
+
+ num_clips = arg->num_clips;
+ clips_ptr = (struct drm_vmw_rect *)(unsigned long)arg->clips_ptr;
+
+ if (unlikely(num_clips == 0))
+ return 0;
+
+ if (clips_ptr == NULL) {
+ DRM_ERROR("Variable clips_ptr must be specified.\n");
+ ret = -EINVAL;
+ goto out_clips;
+ }
+
+ clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL);
+ if (clips == NULL) {
+ DRM_ERROR("Failed to allocate clip rect list.\n");
+ ret = -ENOMEM;
+ goto out_clips;
+ }
+
+ ret = copy_from_user(clips, clips_ptr, num_clips * sizeof(*clips));
+ if (ret) {
+ DRM_ERROR("Failed to copy clip rects from userspace.\n");
+ ret = -EFAULT;
+ goto out_no_copy;
+ }
+
+ ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+ if (unlikely(ret != 0)) {
+ ret = -ERESTARTSYS;
+ goto out_no_mode_mutex;
+ }
+
+ obj = drm_mode_object_find(dev, arg->fb_id, DRM_MODE_OBJECT_FB);
+ if (!obj) {
+ DRM_ERROR("Invalid framebuffer id.\n");
+ ret = -EINVAL;
+ goto out_no_fb;
+ }
+
+ vfb = vmw_framebuffer_to_vfb(obj_to_fb(obj));
+ if (!vfb->dmabuf) {
+ DRM_ERROR("Framebuffer not dmabuf backed.\n");
+ ret = -EINVAL;
+ goto out_no_fb;
+ }
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ goto out_no_ttm_lock;
+
+ ret = vmw_user_surface_lookup_handle(dev_priv, tfile, arg->sid,
+ &surface);
+ if (ret)
+ goto out_no_surface;
+
+ ret = vmw_kms_present(dev_priv, file_priv,
+ vfb, surface, arg->sid,
+ arg->dest_x, arg->dest_y,
+ clips, num_clips);
+
+ /* vmw_user_surface_lookup takes one ref so does new_fb */
+ vmw_surface_unreference(&surface);
+
+out_no_surface:
+ ttm_read_unlock(&vmaster->lock);
+out_no_ttm_lock:
+out_no_fb:
+ mutex_unlock(&dev->mode_config.mutex);
+out_no_mode_mutex:
+out_no_copy:
+ kfree(clips);
+out_clips:
+ return ret;
+}
+
+int vmw_present_readback_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_vmw_present_readback_arg *arg =
+ (struct drm_vmw_present_readback_arg *)data;
+ struct drm_vmw_fence_rep __user *user_fence_rep =
+ (struct drm_vmw_fence_rep __user *)
+ (unsigned long)arg->fence_rep;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
+ struct drm_vmw_rect __user *clips_ptr;
+ struct drm_vmw_rect *clips = NULL;
+ struct drm_mode_object *obj;
+ struct vmw_framebuffer *vfb;
+ uint32_t num_clips;
+ int ret;
+
+ num_clips = arg->num_clips;
+ clips_ptr = (struct drm_vmw_rect *)(unsigned long)arg->clips_ptr;
+
+ if (unlikely(num_clips == 0))
+ return 0;
+
+ if (clips_ptr == NULL) {
+ DRM_ERROR("Argument clips_ptr must be specified.\n");
+ ret = -EINVAL;
+ goto out_clips;
+ }
+
+ clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL);
+ if (clips == NULL) {
+ DRM_ERROR("Failed to allocate clip rect list.\n");
+ ret = -ENOMEM;
+ goto out_clips;
+ }
+
+ ret = copy_from_user(clips, clips_ptr, num_clips * sizeof(*clips));
+ if (ret) {
+ DRM_ERROR("Failed to copy clip rects from userspace.\n");
+ ret = -EFAULT;
+ goto out_no_copy;
+ }
+
+ ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+ if (unlikely(ret != 0)) {
+ ret = -ERESTARTSYS;
+ goto out_no_mode_mutex;
+ }
+
+ obj = drm_mode_object_find(dev, arg->fb_id, DRM_MODE_OBJECT_FB);
+ if (!obj) {
+ DRM_ERROR("Invalid framebuffer id.\n");
+ ret = -EINVAL;
+ goto out_no_fb;
+ }
+
+ vfb = vmw_framebuffer_to_vfb(obj_to_fb(obj));
+ if (!vfb->dmabuf) {
+ DRM_ERROR("Framebuffer not dmabuf backed.\n");
+ ret = -EINVAL;
+ goto out_no_fb;
+ }
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ goto out_no_ttm_lock;
+
+ ret = vmw_kms_readback(dev_priv, file_priv,
+ vfb, user_fence_rep,
+ clips, num_clips);
+
+ ttm_read_unlock(&vmaster->lock);
+out_no_ttm_lock:
+out_no_fb:
+ mutex_unlock(&dev->mode_config.mutex);
+out_no_mode_mutex:
+out_no_copy:
+ kfree(clips);
+out_clips:
+ return ret;
+}
+
+
+/**
+ * vmw_fops_poll - wrapper around the drm_poll function
+ *
+ * @filp: See the linux fops poll documentation.
+ * @wait: See the linux fops poll documentation.
+ *
+ * Wrapper around the drm_poll function that makes sure the device is
+ * processing the fifo if drm_poll decides to wait.
+ */
+unsigned int vmw_fops_poll(struct file *filp, struct poll_table_struct *wait)
+{
+ struct drm_file *file_priv = filp->private_data;
+ struct vmw_private *dev_priv =
+ vmw_priv(file_priv->minor->dev);
+
+ vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
+ return drm_poll(filp, wait);
+}
+
+
+/**
+ * vmw_fops_read - wrapper around the drm_read function
+ *
+ * @filp: See the linux fops read documentation.
+ * @buffer: See the linux fops read documentation.
+ * @count: See the linux fops read documentation.
+ * offset: See the linux fops read documentation.
+ *
+ * Wrapper around the drm_read function that makes sure the device is
+ * processing the fifo if drm_read decides to wait.
+ */
+ssize_t vmw_fops_read(struct file *filp, char __user *buffer,
+ size_t count, loff_t *offset)
+{
+ struct drm_file *file_priv = filp->private_data;
+ struct vmw_private *dev_priv =
+ vmw_priv(file_priv->minor->dev);
+
+ vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
+ return drm_read(filp, buffer, count, offset);
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
index e92298a..cabc95f 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
@@ -34,26 +34,33 @@
{
struct drm_device *dev = (struct drm_device *)arg;
struct vmw_private *dev_priv = vmw_priv(dev);
- uint32_t status;
+ uint32_t status, masked_status;
spin_lock(&dev_priv->irq_lock);
status = inl(dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
+ masked_status = status & dev_priv->irq_mask;
spin_unlock(&dev_priv->irq_lock);
- if (status & SVGA_IRQFLAG_ANY_FENCE)
- wake_up_all(&dev_priv->fence_queue);
- if (status & SVGA_IRQFLAG_FIFO_PROGRESS)
- wake_up_all(&dev_priv->fifo_queue);
-
- if (likely(status)) {
+ if (likely(status))
outl(status, dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
- return IRQ_HANDLED;
+
+ if (!masked_status)
+ return IRQ_NONE;
+
+ if (masked_status & (SVGA_IRQFLAG_ANY_FENCE |
+ SVGA_IRQFLAG_FENCE_GOAL)) {
+ vmw_fences_update(dev_priv->fman);
+ wake_up_all(&dev_priv->fence_queue);
}
- return IRQ_NONE;
+ if (masked_status & SVGA_IRQFLAG_FIFO_PROGRESS)
+ wake_up_all(&dev_priv->fifo_queue);
+
+
+ return IRQ_HANDLED;
}
-static bool vmw_fifo_idle(struct vmw_private *dev_priv, uint32_t sequence)
+static bool vmw_fifo_idle(struct vmw_private *dev_priv, uint32_t seqno)
{
uint32_t busy;
@@ -64,43 +71,43 @@
return (busy == 0);
}
-void vmw_update_sequence(struct vmw_private *dev_priv,
+void vmw_update_seqno(struct vmw_private *dev_priv,
struct vmw_fifo_state *fifo_state)
{
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+ uint32_t seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE);
- uint32_t sequence = ioread32(fifo_mem + SVGA_FIFO_FENCE);
-
- if (dev_priv->last_read_sequence != sequence) {
- dev_priv->last_read_sequence = sequence;
- vmw_fence_pull(&fifo_state->fence_queue, sequence);
+ if (dev_priv->last_read_seqno != seqno) {
+ dev_priv->last_read_seqno = seqno;
+ vmw_marker_pull(&fifo_state->marker_queue, seqno);
+ vmw_fences_update(dev_priv->fman);
}
}
-bool vmw_fence_signaled(struct vmw_private *dev_priv,
- uint32_t sequence)
+bool vmw_seqno_passed(struct vmw_private *dev_priv,
+ uint32_t seqno)
{
struct vmw_fifo_state *fifo_state;
bool ret;
- if (likely(dev_priv->last_read_sequence - sequence < VMW_FENCE_WRAP))
+ if (likely(dev_priv->last_read_seqno - seqno < VMW_FENCE_WRAP))
return true;
fifo_state = &dev_priv->fifo;
- vmw_update_sequence(dev_priv, fifo_state);
- if (likely(dev_priv->last_read_sequence - sequence < VMW_FENCE_WRAP))
+ vmw_update_seqno(dev_priv, fifo_state);
+ if (likely(dev_priv->last_read_seqno - seqno < VMW_FENCE_WRAP))
return true;
if (!(fifo_state->capabilities & SVGA_FIFO_CAP_FENCE) &&
- vmw_fifo_idle(dev_priv, sequence))
+ vmw_fifo_idle(dev_priv, seqno))
return true;
/**
- * Then check if the sequence is higher than what we've actually
+ * Then check if the seqno is higher than what we've actually
* emitted. Then the fence is stale and signaled.
*/
- ret = ((atomic_read(&dev_priv->fence_seq) - sequence)
+ ret = ((atomic_read(&dev_priv->marker_seq) - seqno)
> VMW_FENCE_WRAP);
return ret;
@@ -109,7 +116,7 @@
int vmw_fallback_wait(struct vmw_private *dev_priv,
bool lazy,
bool fifo_idle,
- uint32_t sequence,
+ uint32_t seqno,
bool interruptible,
unsigned long timeout)
{
@@ -123,7 +130,7 @@
DEFINE_WAIT(__wait);
wait_condition = (fifo_idle) ? &vmw_fifo_idle :
- &vmw_fence_signaled;
+ &vmw_seqno_passed;
/**
* Block command submission while waiting for idle.
@@ -131,14 +138,14 @@
if (fifo_idle)
down_read(&fifo_state->rwsem);
- signal_seq = atomic_read(&dev_priv->fence_seq);
+ signal_seq = atomic_read(&dev_priv->marker_seq);
ret = 0;
for (;;) {
prepare_to_wait(&dev_priv->fence_queue, &__wait,
(interruptible) ?
TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
- if (wait_condition(dev_priv, sequence))
+ if (wait_condition(dev_priv, seqno))
break;
if (time_after_eq(jiffies, end_jiffies)) {
DRM_ERROR("SVGA device lockup.\n");
@@ -175,68 +182,110 @@
return ret;
}
-int vmw_wait_fence(struct vmw_private *dev_priv,
- bool lazy, uint32_t sequence,
- bool interruptible, unsigned long timeout)
+void vmw_seqno_waiter_add(struct vmw_private *dev_priv)
+{
+ mutex_lock(&dev_priv->hw_mutex);
+ if (dev_priv->fence_queue_waiters++ == 0) {
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
+ outl(SVGA_IRQFLAG_ANY_FENCE,
+ dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
+ dev_priv->irq_mask |= SVGA_IRQFLAG_ANY_FENCE;
+ vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
+ }
+ mutex_unlock(&dev_priv->hw_mutex);
+}
+
+void vmw_seqno_waiter_remove(struct vmw_private *dev_priv)
+{
+ mutex_lock(&dev_priv->hw_mutex);
+ if (--dev_priv->fence_queue_waiters == 0) {
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
+ dev_priv->irq_mask &= ~SVGA_IRQFLAG_ANY_FENCE;
+ vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
+ }
+ mutex_unlock(&dev_priv->hw_mutex);
+}
+
+
+void vmw_goal_waiter_add(struct vmw_private *dev_priv)
+{
+ mutex_lock(&dev_priv->hw_mutex);
+ if (dev_priv->goal_queue_waiters++ == 0) {
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
+ outl(SVGA_IRQFLAG_FENCE_GOAL,
+ dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
+ dev_priv->irq_mask |= SVGA_IRQFLAG_FENCE_GOAL;
+ vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
+ }
+ mutex_unlock(&dev_priv->hw_mutex);
+}
+
+void vmw_goal_waiter_remove(struct vmw_private *dev_priv)
+{
+ mutex_lock(&dev_priv->hw_mutex);
+ if (--dev_priv->goal_queue_waiters == 0) {
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
+ dev_priv->irq_mask &= ~SVGA_IRQFLAG_FENCE_GOAL;
+ vmw_write(dev_priv, SVGA_REG_IRQMASK, dev_priv->irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
+ }
+ mutex_unlock(&dev_priv->hw_mutex);
+}
+
+int vmw_wait_seqno(struct vmw_private *dev_priv,
+ bool lazy, uint32_t seqno,
+ bool interruptible, unsigned long timeout)
{
long ret;
- unsigned long irq_flags;
struct vmw_fifo_state *fifo = &dev_priv->fifo;
- if (likely(dev_priv->last_read_sequence - sequence < VMW_FENCE_WRAP))
+ if (likely(dev_priv->last_read_seqno - seqno < VMW_FENCE_WRAP))
return 0;
- if (likely(vmw_fence_signaled(dev_priv, sequence)))
+ if (likely(vmw_seqno_passed(dev_priv, seqno)))
return 0;
vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
if (!(fifo->capabilities & SVGA_FIFO_CAP_FENCE))
- return vmw_fallback_wait(dev_priv, lazy, true, sequence,
+ return vmw_fallback_wait(dev_priv, lazy, true, seqno,
interruptible, timeout);
if (!(dev_priv->capabilities & SVGA_CAP_IRQMASK))
- return vmw_fallback_wait(dev_priv, lazy, false, sequence,
+ return vmw_fallback_wait(dev_priv, lazy, false, seqno,
interruptible, timeout);
- mutex_lock(&dev_priv->hw_mutex);
- if (atomic_add_return(1, &dev_priv->fence_queue_waiters) > 0) {
- spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
- outl(SVGA_IRQFLAG_ANY_FENCE,
- dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
- vmw_write(dev_priv, SVGA_REG_IRQMASK,
- vmw_read(dev_priv, SVGA_REG_IRQMASK) |
- SVGA_IRQFLAG_ANY_FENCE);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
- }
- mutex_unlock(&dev_priv->hw_mutex);
+ vmw_seqno_waiter_add(dev_priv);
if (interruptible)
ret = wait_event_interruptible_timeout
(dev_priv->fence_queue,
- vmw_fence_signaled(dev_priv, sequence),
+ vmw_seqno_passed(dev_priv, seqno),
timeout);
else
ret = wait_event_timeout
(dev_priv->fence_queue,
- vmw_fence_signaled(dev_priv, sequence),
+ vmw_seqno_passed(dev_priv, seqno),
timeout);
+ vmw_seqno_waiter_remove(dev_priv);
+
if (unlikely(ret == 0))
ret = -EBUSY;
else if (likely(ret > 0))
ret = 0;
- mutex_lock(&dev_priv->hw_mutex);
- if (atomic_dec_and_test(&dev_priv->fence_queue_waiters)) {
- spin_lock_irqsave(&dev_priv->irq_lock, irq_flags);
- vmw_write(dev_priv, SVGA_REG_IRQMASK,
- vmw_read(dev_priv, SVGA_REG_IRQMASK) &
- ~SVGA_IRQFLAG_ANY_FENCE);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irq_flags);
- }
- mutex_unlock(&dev_priv->hw_mutex);
-
return ret;
}
@@ -273,25 +322,3 @@
status = inl(dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
outl(status, dev_priv->io_start + VMWGFX_IRQSTATUS_PORT);
}
-
-#define VMW_FENCE_WAIT_TIMEOUT 3*HZ;
-
-int vmw_fence_wait_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_vmw_fence_wait_arg *arg =
- (struct drm_vmw_fence_wait_arg *)data;
- unsigned long timeout;
-
- if (!arg->cookie_valid) {
- arg->cookie_valid = 1;
- arg->kernel_cookie = jiffies + VMW_FENCE_WAIT_TIMEOUT;
- }
-
- timeout = jiffies;
- if (time_after_eq(timeout, (unsigned long)arg->kernel_cookie))
- return -EBUSY;
-
- timeout = (unsigned long)arg->kernel_cookie - timeout;
- return vmw_wait_fence(vmw_priv(dev), true, arg->sequence, true, timeout);
-}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index dfe32e6..8b14dfd 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -27,12 +27,10 @@
#include "vmwgfx_kms.h"
+
/* Might need a hrtimer here? */
#define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
-static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb);
-static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb);
-
void vmw_display_unit_cleanup(struct vmw_display_unit *du)
{
if (du->cursor_surface)
@@ -329,41 +327,10 @@
struct vmw_framebuffer base;
struct vmw_surface *surface;
struct vmw_dma_buffer *buffer;
- struct delayed_work d_work;
- struct mutex work_lock;
- bool present_fs;
struct list_head head;
struct drm_master *master;
};
-/**
- * vmw_kms_idle_workqueues - Flush workqueues on this master
- *
- * @vmaster - Pointer identifying the master, for the surfaces of which
- * we idle the dirty work queues.
- *
- * This function should be called with the ttm lock held in exclusive mode
- * to idle all dirty work queues before the fifo is taken down.
- *
- * The work task may actually requeue itself, but after the flush returns we're
- * sure that there's nothing to present, since the ttm lock is held in
- * exclusive mode, so the fifo will never get used.
- */
-
-void vmw_kms_idle_workqueues(struct vmw_master *vmaster)
-{
- struct vmw_framebuffer_surface *entry;
-
- mutex_lock(&vmaster->fb_surf_mutex);
- list_for_each_entry(entry, &vmaster->fb_surf, head) {
- if (cancel_delayed_work_sync(&entry->d_work))
- (void) entry->d_work.work.func(&entry->d_work.work);
-
- (void) cancel_delayed_work_sync(&entry->d_work);
- }
- mutex_unlock(&vmaster->fb_surf_mutex);
-}
-
void vmw_framebuffer_surface_destroy(struct drm_framebuffer *framebuffer)
{
struct vmw_framebuffer_surface *vfbs =
@@ -375,65 +342,128 @@
list_del(&vfbs->head);
mutex_unlock(&vmaster->fb_surf_mutex);
- cancel_delayed_work_sync(&vfbs->d_work);
drm_master_put(&vfbs->master);
drm_framebuffer_cleanup(framebuffer);
vmw_surface_unreference(&vfbs->surface);
+ ttm_base_object_unref(&vfbs->base.user_obj);
kfree(vfbs);
}
-static void vmw_framebuffer_present_fs_callback(struct work_struct *work)
+static int do_surface_dirty_sou(struct vmw_private *dev_priv,
+ struct drm_file *file_priv,
+ struct vmw_framebuffer *framebuffer,
+ unsigned flags, unsigned color,
+ struct drm_clip_rect *clips,
+ unsigned num_clips, int inc)
{
- struct delayed_work *d_work =
- container_of(work, struct delayed_work, work);
- struct vmw_framebuffer_surface *vfbs =
- container_of(d_work, struct vmw_framebuffer_surface, d_work);
- struct vmw_surface *surf = vfbs->surface;
- struct drm_framebuffer *framebuffer = &vfbs->base.base;
- struct vmw_private *dev_priv = vmw_priv(framebuffer->dev);
+ struct drm_clip_rect *clips_ptr;
+ struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+ struct drm_crtc *crtc;
+ size_t fifo_size;
+ int i, num_units;
+ int ret = 0; /* silence warning */
+ int left, right, top, bottom;
struct {
SVGA3dCmdHeader header;
- SVGA3dCmdPresent body;
- SVGA3dCopyRect cr;
+ SVGA3dCmdBlitSurfaceToScreen body;
} *cmd;
+ SVGASignedRect *blits;
- /**
- * Strictly we should take the ttm_lock in read mode before accessing
- * the fifo, to make sure the fifo is present and up. However,
- * instead we flush all workqueues under the ttm lock in exclusive mode
- * before taking down the fifo.
- */
- mutex_lock(&vfbs->work_lock);
- if (!vfbs->present_fs)
- goto out_unlock;
- cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
- if (unlikely(cmd == NULL))
- goto out_resched;
+ num_units = 0;
+ list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list,
+ head) {
+ if (crtc->fb != &framebuffer->base)
+ continue;
+ units[num_units++] = vmw_crtc_to_du(crtc);
+ }
- cmd->header.id = cpu_to_le32(SVGA_3D_CMD_PRESENT);
- cmd->header.size = cpu_to_le32(sizeof(cmd->body) + sizeof(cmd->cr));
- cmd->body.sid = cpu_to_le32(surf->res.id);
- cmd->cr.x = cpu_to_le32(0);
- cmd->cr.y = cpu_to_le32(0);
- cmd->cr.srcx = cmd->cr.x;
- cmd->cr.srcy = cmd->cr.y;
- cmd->cr.w = cpu_to_le32(framebuffer->width);
- cmd->cr.h = cpu_to_le32(framebuffer->height);
- vfbs->present_fs = false;
- vmw_fifo_commit(dev_priv, sizeof(*cmd));
-out_resched:
- /**
- * Will not re-add if already pending.
- */
- schedule_delayed_work(&vfbs->d_work, VMWGFX_PRESENT_RATE);
-out_unlock:
- mutex_unlock(&vfbs->work_lock);
+ BUG_ON(!clips || !num_clips);
+
+ fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
+ cmd = kzalloc(fifo_size, GFP_KERNEL);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Temporary fifo memory alloc failed.\n");
+ return -ENOMEM;
+ }
+
+ left = clips->x1;
+ right = clips->x2;
+ top = clips->y1;
+ bottom = clips->y2;
+
+ clips_ptr = clips;
+ for (i = 1; i < num_clips; i++, clips_ptr += inc) {
+ left = min_t(int, left, (int)clips_ptr->x1);
+ right = max_t(int, right, (int)clips_ptr->x2);
+ top = min_t(int, top, (int)clips_ptr->y1);
+ bottom = max_t(int, bottom, (int)clips_ptr->y2);
+ }
+
+ /* only need to do this once */
+ memset(cmd, 0, fifo_size);
+ cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN);
+ cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
+
+ cmd->body.srcRect.left = left;
+ cmd->body.srcRect.right = right;
+ cmd->body.srcRect.top = top;
+ cmd->body.srcRect.bottom = bottom;
+
+ clips_ptr = clips;
+ blits = (SVGASignedRect *)&cmd[1];
+ for (i = 0; i < num_clips; i++, clips_ptr += inc) {
+ blits[i].left = clips_ptr->x1 - left;
+ blits[i].right = clips_ptr->x2 - left;
+ blits[i].top = clips_ptr->y1 - top;
+ blits[i].bottom = clips_ptr->y2 - top;
+ }
+
+ /* do per unit writing, reuse fifo for each */
+ for (i = 0; i < num_units; i++) {
+ struct vmw_display_unit *unit = units[i];
+ int clip_x1 = left - unit->crtc.x;
+ int clip_y1 = top - unit->crtc.y;
+ int clip_x2 = right - unit->crtc.x;
+ int clip_y2 = bottom - unit->crtc.y;
+
+ /* skip any crtcs that misses the clip region */
+ if (clip_x1 >= unit->crtc.mode.hdisplay ||
+ clip_y1 >= unit->crtc.mode.vdisplay ||
+ clip_x2 <= 0 || clip_y2 <= 0)
+ continue;
+
+ /* need to reset sid as it is changed by execbuf */
+ cmd->body.srcImage.sid = cpu_to_le32(framebuffer->user_handle);
+
+ cmd->body.destScreenId = unit->unit;
+
+ /*
+ * The blit command is a lot more resilient then the
+ * readback command when it comes to clip rects. So its
+ * okay to go out of bounds.
+ */
+
+ cmd->body.destRect.left = clip_x1;
+ cmd->body.destRect.right = clip_x2;
+ cmd->body.destRect.top = clip_y1;
+ cmd->body.destRect.bottom = clip_y2;
+
+
+ ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
+ fifo_size, 0, NULL);
+
+ if (unlikely(ret != 0))
+ break;
+ }
+
+ kfree(cmd);
+
+ return ret;
}
-
int vmw_framebuffer_surface_dirty(struct drm_framebuffer *framebuffer,
struct drm_file *file_priv,
unsigned flags, unsigned color,
@@ -444,44 +474,20 @@
struct vmw_master *vmaster = vmw_master(file_priv->master);
struct vmw_framebuffer_surface *vfbs =
vmw_framebuffer_to_vfbs(framebuffer);
- struct vmw_surface *surf = vfbs->surface;
struct drm_clip_rect norect;
- SVGA3dCopyRect *cr;
- int i, inc = 1;
- int ret;
-
- struct {
- SVGA3dCmdHeader header;
- SVGA3dCmdPresent body;
- SVGA3dCopyRect cr;
- } *cmd;
+ int ret, inc = 1;
if (unlikely(vfbs->master != file_priv->master))
return -EINVAL;
+ /* Require ScreenObject support for 3D */
+ if (!dev_priv->sou_priv)
+ return -EINVAL;
+
ret = ttm_read_lock(&vmaster->lock, true);
if (unlikely(ret != 0))
return ret;
- if (!num_clips ||
- !(dev_priv->fifo.capabilities &
- SVGA_FIFO_CAP_SCREEN_OBJECT)) {
- int ret;
-
- mutex_lock(&vfbs->work_lock);
- vfbs->present_fs = true;
- ret = schedule_delayed_work(&vfbs->d_work, VMWGFX_PRESENT_RATE);
- mutex_unlock(&vfbs->work_lock);
- if (ret) {
- /**
- * No work pending, Force immediate present.
- */
- vmw_framebuffer_present_fs_callback(&vfbs->d_work.work);
- }
- ttm_read_unlock(&vmaster->lock);
- return 0;
- }
-
if (!num_clips) {
num_clips = 1;
clips = &norect;
@@ -493,29 +499,10 @@
inc = 2; /* skip source rects */
}
- cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd) + (num_clips - 1) * sizeof(cmd->cr));
- if (unlikely(cmd == NULL)) {
- DRM_ERROR("Fifo reserve failed.\n");
- ttm_read_unlock(&vmaster->lock);
- return -ENOMEM;
- }
+ ret = do_surface_dirty_sou(dev_priv, file_priv, &vfbs->base,
+ flags, color,
+ clips, num_clips, inc);
- memset(cmd, 0, sizeof(*cmd));
-
- cmd->header.id = cpu_to_le32(SVGA_3D_CMD_PRESENT);
- cmd->header.size = cpu_to_le32(sizeof(cmd->body) + num_clips * sizeof(cmd->cr));
- cmd->body.sid = cpu_to_le32(surf->res.id);
-
- for (i = 0, cr = &cmd->cr; i < num_clips; i++, cr++, clips += inc) {
- cr->x = cpu_to_le16(clips->x1);
- cr->y = cpu_to_le16(clips->y1);
- cr->srcx = cr->x;
- cr->srcy = cr->y;
- cr->w = cpu_to_le16(clips->x2 - clips->x1);
- cr->h = cpu_to_le16(clips->y2 - clips->y1);
- }
-
- vmw_fifo_commit(dev_priv, sizeof(*cmd) + (num_clips - 1) * sizeof(cmd->cr));
ttm_read_unlock(&vmaster->lock);
return 0;
}
@@ -540,6 +527,10 @@
struct vmw_master *vmaster = vmw_master(file_priv->master);
int ret;
+ /* 3D is only supported on HWv8 hosts which supports screen objects */
+ if (!dev_priv->sou_priv)
+ return -ENOSYS;
+
/*
* Sanity checks.
*/
@@ -567,6 +558,9 @@
case 15:
format = SVGA3D_A1R5G5B5;
break;
+ case 8:
+ format = SVGA3D_LUMINANCE8;
+ break;
default:
DRM_ERROR("Invalid color depth: %d\n", mode_cmd->depth);
return -EINVAL;
@@ -599,14 +593,11 @@
vfbs->base.base.depth = mode_cmd->depth;
vfbs->base.base.width = mode_cmd->width;
vfbs->base.base.height = mode_cmd->height;
- vfbs->base.pin = &vmw_surface_dmabuf_pin;
- vfbs->base.unpin = &vmw_surface_dmabuf_unpin;
vfbs->surface = surface;
+ vfbs->base.user_handle = mode_cmd->handle;
vfbs->master = drm_master_get(file_priv->master);
- mutex_init(&vfbs->work_lock);
mutex_lock(&vmaster->fb_surf_mutex);
- INIT_DELAYED_WORK(&vfbs->d_work, &vmw_framebuffer_present_fs_callback);
list_add_tail(&vfbs->head, &vmaster->fb_surf);
mutex_unlock(&vmaster->fb_surf_mutex);
@@ -641,10 +632,170 @@
drm_framebuffer_cleanup(framebuffer);
vmw_dmabuf_unreference(&vfbd->buffer);
+ ttm_base_object_unref(&vfbd->base.user_obj);
kfree(vfbd);
}
+static int do_dmabuf_dirty_ldu(struct vmw_private *dev_priv,
+ struct vmw_framebuffer *framebuffer,
+ unsigned flags, unsigned color,
+ struct drm_clip_rect *clips,
+ unsigned num_clips, int increment)
+{
+ size_t fifo_size;
+ int i;
+
+ struct {
+ uint32_t header;
+ SVGAFifoCmdUpdate body;
+ } *cmd;
+
+ fifo_size = sizeof(*cmd) * num_clips;
+ cmd = vmw_fifo_reserve(dev_priv, fifo_size);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Fifo reserve failed.\n");
+ return -ENOMEM;
+ }
+
+ memset(cmd, 0, fifo_size);
+ for (i = 0; i < num_clips; i++, clips += increment) {
+ cmd[i].header = cpu_to_le32(SVGA_CMD_UPDATE);
+ cmd[i].body.x = cpu_to_le32(clips->x1);
+ cmd[i].body.y = cpu_to_le32(clips->y1);
+ cmd[i].body.width = cpu_to_le32(clips->x2 - clips->x1);
+ cmd[i].body.height = cpu_to_le32(clips->y2 - clips->y1);
+ }
+
+ vmw_fifo_commit(dev_priv, fifo_size);
+ return 0;
+}
+
+static int do_dmabuf_define_gmrfb(struct drm_file *file_priv,
+ struct vmw_private *dev_priv,
+ struct vmw_framebuffer *framebuffer)
+{
+ int depth = framebuffer->base.depth;
+ size_t fifo_size;
+ int ret;
+
+ struct {
+ uint32_t header;
+ SVGAFifoCmdDefineGMRFB body;
+ } *cmd;
+
+ /* Emulate RGBA support, contrary to svga_reg.h this is not
+ * supported by hosts. This is only a problem if we are reading
+ * this value later and expecting what we uploaded back.
+ */
+ if (depth == 32)
+ depth = 24;
+
+ fifo_size = sizeof(*cmd);
+ cmd = kmalloc(fifo_size, GFP_KERNEL);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Failed to allocate temporary cmd buffer.\n");
+ return -ENOMEM;
+ }
+
+ memset(cmd, 0, fifo_size);
+ cmd->header = SVGA_CMD_DEFINE_GMRFB;
+ cmd->body.format.bitsPerPixel = framebuffer->base.bits_per_pixel;
+ cmd->body.format.colorDepth = depth;
+ cmd->body.format.reserved = 0;
+ cmd->body.bytesPerLine = framebuffer->base.pitch;
+ cmd->body.ptr.gmrId = framebuffer->user_handle;
+ cmd->body.ptr.offset = 0;
+
+ ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
+ fifo_size, 0, NULL);
+
+ kfree(cmd);
+
+ return ret;
+}
+
+static int do_dmabuf_dirty_sou(struct drm_file *file_priv,
+ struct vmw_private *dev_priv,
+ struct vmw_framebuffer *framebuffer,
+ unsigned flags, unsigned color,
+ struct drm_clip_rect *clips,
+ unsigned num_clips, int increment)
+{
+ struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+ struct drm_clip_rect *clips_ptr;
+ int i, k, num_units, ret;
+ struct drm_crtc *crtc;
+ size_t fifo_size;
+
+ struct {
+ uint32_t header;
+ SVGAFifoCmdBlitGMRFBToScreen body;
+ } *blits;
+
+ ret = do_dmabuf_define_gmrfb(file_priv, dev_priv, framebuffer);
+ if (unlikely(ret != 0))
+ return ret; /* define_gmrfb prints warnings */
+
+ fifo_size = sizeof(*blits) * num_clips;
+ blits = kmalloc(fifo_size, GFP_KERNEL);
+ if (unlikely(blits == NULL)) {
+ DRM_ERROR("Failed to allocate temporary cmd buffer.\n");
+ return -ENOMEM;
+ }
+
+ num_units = 0;
+ list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, head) {
+ if (crtc->fb != &framebuffer->base)
+ continue;
+ units[num_units++] = vmw_crtc_to_du(crtc);
+ }
+
+ for (k = 0; k < num_units; k++) {
+ struct vmw_display_unit *unit = units[k];
+ int hit_num = 0;
+
+ clips_ptr = clips;
+ for (i = 0; i < num_clips; i++, clips_ptr += increment) {
+ int clip_x1 = clips_ptr->x1 - unit->crtc.x;
+ int clip_y1 = clips_ptr->y1 - unit->crtc.y;
+ int clip_x2 = clips_ptr->x2 - unit->crtc.x;
+ int clip_y2 = clips_ptr->y2 - unit->crtc.y;
+
+ /* skip any crtcs that misses the clip region */
+ if (clip_x1 >= unit->crtc.mode.hdisplay ||
+ clip_y1 >= unit->crtc.mode.vdisplay ||
+ clip_x2 <= 0 || clip_y2 <= 0)
+ continue;
+
+ blits[hit_num].header = SVGA_CMD_BLIT_GMRFB_TO_SCREEN;
+ blits[hit_num].body.destScreenId = unit->unit;
+ blits[hit_num].body.srcOrigin.x = clips_ptr->x1;
+ blits[hit_num].body.srcOrigin.y = clips_ptr->y1;
+ blits[hit_num].body.destRect.left = clip_x1;
+ blits[hit_num].body.destRect.top = clip_y1;
+ blits[hit_num].body.destRect.right = clip_x2;
+ blits[hit_num].body.destRect.bottom = clip_y2;
+ hit_num++;
+ }
+
+ /* no clips hit the crtc */
+ if (hit_num == 0)
+ continue;
+
+ fifo_size = sizeof(*blits) * hit_num;
+ ret = vmw_execbuf_process(file_priv, dev_priv, NULL, blits,
+ fifo_size, 0, NULL);
+
+ if (unlikely(ret != 0))
+ break;
+ }
+
+ kfree(blits);
+
+ return ret;
+}
+
int vmw_framebuffer_dmabuf_dirty(struct drm_framebuffer *framebuffer,
struct drm_file *file_priv,
unsigned flags, unsigned color,
@@ -653,13 +804,10 @@
{
struct vmw_private *dev_priv = vmw_priv(framebuffer->dev);
struct vmw_master *vmaster = vmw_master(file_priv->master);
+ struct vmw_framebuffer_dmabuf *vfbd =
+ vmw_framebuffer_to_vfbd(framebuffer);
struct drm_clip_rect norect;
- int ret;
- struct {
- uint32_t header;
- SVGAFifoCmdUpdate body;
- } *cmd;
- int i, increment = 1;
+ int ret, increment = 1;
ret = ttm_read_lock(&vmaster->lock, true);
if (unlikely(ret != 0))
@@ -676,25 +824,18 @@
increment = 2;
}
- cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd) * num_clips);
- if (unlikely(cmd == NULL)) {
- DRM_ERROR("Fifo reserve failed.\n");
- ttm_read_unlock(&vmaster->lock);
- return -ENOMEM;
+ if (dev_priv->ldu_priv) {
+ ret = do_dmabuf_dirty_ldu(dev_priv, &vfbd->base,
+ flags, color,
+ clips, num_clips, increment);
+ } else {
+ ret = do_dmabuf_dirty_sou(file_priv, dev_priv, &vfbd->base,
+ flags, color,
+ clips, num_clips, increment);
}
- for (i = 0; i < num_clips; i++, clips += increment) {
- cmd[i].header = cpu_to_le32(SVGA_CMD_UPDATE);
- cmd[i].body.x = cpu_to_le32(clips->x1);
- cmd[i].body.y = cpu_to_le32(clips->y1);
- cmd[i].body.width = cpu_to_le32(clips->x2 - clips->x1);
- cmd[i].body.height = cpu_to_le32(clips->y2 - clips->y1);
- }
-
- vmw_fifo_commit(dev_priv, sizeof(*cmd) * num_clips);
ttm_read_unlock(&vmaster->lock);
-
- return 0;
+ return ret;
}
static struct drm_framebuffer_funcs vmw_framebuffer_dmabuf_funcs = {
@@ -703,45 +844,9 @@
.create_handle = vmw_framebuffer_create_handle,
};
-static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb)
-{
- struct vmw_private *dev_priv = vmw_priv(vfb->base.dev);
- struct vmw_framebuffer_surface *vfbs =
- vmw_framebuffer_to_vfbs(&vfb->base);
- unsigned long size = vfbs->base.base.pitch * vfbs->base.base.height;
- int ret;
-
- vfbs->buffer = kzalloc(sizeof(*vfbs->buffer), GFP_KERNEL);
- if (unlikely(vfbs->buffer == NULL))
- return -ENOMEM;
-
- vmw_overlay_pause_all(dev_priv);
- ret = vmw_dmabuf_init(dev_priv, vfbs->buffer, size,
- &vmw_vram_ne_placement,
- false, &vmw_dmabuf_bo_free);
- vmw_overlay_resume_all(dev_priv);
- if (unlikely(ret != 0))
- vfbs->buffer = NULL;
-
- return ret;
-}
-
-static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb)
-{
- struct ttm_buffer_object *bo;
- struct vmw_framebuffer_surface *vfbs =
- vmw_framebuffer_to_vfbs(&vfb->base);
-
- if (unlikely(vfbs->buffer == NULL))
- return 0;
-
- bo = &vfbs->buffer->base;
- ttm_bo_unref(&bo);
- vfbs->buffer = NULL;
-
- return 0;
-}
-
+/**
+ * Pin the dmabuffer to the start of vram.
+ */
static int vmw_framebuffer_dmabuf_pin(struct vmw_framebuffer *vfb)
{
struct vmw_private *dev_priv = vmw_priv(vfb->base.dev);
@@ -749,10 +854,12 @@
vmw_framebuffer_to_vfbd(&vfb->base);
int ret;
+ /* This code should not be used with screen objects */
+ BUG_ON(dev_priv->sou_priv);
vmw_overlay_pause_all(dev_priv);
- ret = vmw_dmabuf_to_start_of_vram(dev_priv, vfbd->buffer);
+ ret = vmw_dmabuf_to_start_of_vram(dev_priv, vfbd->buffer, true, false);
vmw_overlay_resume_all(dev_priv);
@@ -772,7 +879,7 @@
return 0;
}
- return vmw_dmabuf_from_vram(dev_priv, vfbd->buffer);
+ return vmw_dmabuf_unpin(dev_priv, vfbd->buffer, false);
}
static int vmw_kms_new_framebuffer_dmabuf(struct vmw_private *dev_priv,
@@ -794,6 +901,33 @@
return -EINVAL;
}
+ /* Limited framebuffer color depth support for screen objects */
+ if (dev_priv->sou_priv) {
+ switch (mode_cmd->depth) {
+ case 32:
+ case 24:
+ /* Only support 32 bpp for 32 and 24 depth fbs */
+ if (mode_cmd->bpp == 32)
+ break;
+
+ DRM_ERROR("Invalid color depth/bbp: %d %d\n",
+ mode_cmd->depth, mode_cmd->bpp);
+ return -EINVAL;
+ case 16:
+ case 15:
+ /* Only support 16 bpp for 16 and 15 depth fbs */
+ if (mode_cmd->bpp == 16)
+ break;
+
+ DRM_ERROR("Invalid color depth/bbp: %d %d\n",
+ mode_cmd->depth, mode_cmd->bpp);
+ return -EINVAL;
+ default:
+ DRM_ERROR("Invalid color depth: %d\n", mode_cmd->depth);
+ return -EINVAL;
+ }
+ }
+
vfbd = kzalloc(sizeof(*vfbd), GFP_KERNEL);
if (!vfbd) {
ret = -ENOMEM;
@@ -815,9 +949,13 @@
vfbd->base.base.depth = mode_cmd->depth;
vfbd->base.base.width = mode_cmd->width;
vfbd->base.base.height = mode_cmd->height;
- vfbd->base.pin = vmw_framebuffer_dmabuf_pin;
- vfbd->base.unpin = vmw_framebuffer_dmabuf_unpin;
+ if (!dev_priv->sou_priv) {
+ vfbd->base.pin = vmw_framebuffer_dmabuf_pin;
+ vfbd->base.unpin = vmw_framebuffer_dmabuf_unpin;
+ }
+ vfbd->base.dmabuf = true;
vfbd->buffer = dmabuf;
+ vfbd->base.user_handle = mode_cmd->handle;
*out = &vfbd->base;
return 0;
@@ -843,6 +981,7 @@
struct vmw_framebuffer *vfb = NULL;
struct vmw_surface *surface = NULL;
struct vmw_dma_buffer *bo = NULL;
+ struct ttm_base_object *user_obj;
u64 required_size;
int ret;
@@ -858,6 +997,21 @@
return NULL;
}
+ /*
+ * Take a reference on the user object of the resource
+ * backing the kms fb. This ensures that user-space handle
+ * lookups on that resource will always work as long as
+ * it's registered with a kms framebuffer. This is important,
+ * since vmw_execbuf_process identifies resources in the
+ * command stream using user-space handles.
+ */
+
+ user_obj = ttm_base_object_lookup(tfile, mode_cmd->handle);
+ if (unlikely(user_obj == NULL)) {
+ DRM_ERROR("Could not locate requested kms frame buffer.\n");
+ return ERR_PTR(-ENOENT);
+ }
+
/**
* End conditioned code.
*/
@@ -878,8 +1032,10 @@
if (ret) {
DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
+ ttm_base_object_unref(&user_obj);
return ERR_PTR(ret);
- }
+ } else
+ vfb->user_obj = user_obj;
return &vfb->base;
try_dmabuf:
@@ -899,8 +1055,10 @@
if (ret) {
DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
+ ttm_base_object_unref(&user_obj);
return ERR_PTR(ret);
- }
+ } else
+ vfb->user_obj = user_obj;
return &vfb->base;
@@ -908,6 +1066,7 @@
DRM_ERROR("surface not marked as scanout\n");
/* vmw_user_surface_lookup takes one ref */
vmw_surface_unreference(&surface);
+ ttm_base_object_unref(&user_obj);
return ERR_PTR(-EINVAL);
}
@@ -916,6 +1075,210 @@
.fb_create = vmw_kms_fb_create,
};
+int vmw_kms_present(struct vmw_private *dev_priv,
+ struct drm_file *file_priv,
+ struct vmw_framebuffer *vfb,
+ struct vmw_surface *surface,
+ uint32_t sid,
+ int32_t destX, int32_t destY,
+ struct drm_vmw_rect *clips,
+ uint32_t num_clips)
+{
+ struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+ struct drm_crtc *crtc;
+ size_t fifo_size;
+ int i, k, num_units;
+ int ret = 0; /* silence warning */
+
+ struct {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdBlitSurfaceToScreen body;
+ } *cmd;
+ SVGASignedRect *blits;
+
+ num_units = 0;
+ list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, head) {
+ if (crtc->fb != &vfb->base)
+ continue;
+ units[num_units++] = vmw_crtc_to_du(crtc);
+ }
+
+ BUG_ON(surface == NULL);
+ BUG_ON(!clips || !num_clips);
+
+ fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
+ cmd = kmalloc(fifo_size, GFP_KERNEL);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Failed to allocate temporary fifo memory.\n");
+ return -ENOMEM;
+ }
+
+ /* only need to do this once */
+ memset(cmd, 0, fifo_size);
+ cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN);
+ cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
+
+ cmd->body.srcRect.left = 0;
+ cmd->body.srcRect.right = surface->sizes[0].width;
+ cmd->body.srcRect.top = 0;
+ cmd->body.srcRect.bottom = surface->sizes[0].height;
+
+ blits = (SVGASignedRect *)&cmd[1];
+ for (i = 0; i < num_clips; i++) {
+ blits[i].left = clips[i].x;
+ blits[i].right = clips[i].x + clips[i].w;
+ blits[i].top = clips[i].y;
+ blits[i].bottom = clips[i].y + clips[i].h;
+ }
+
+ for (k = 0; k < num_units; k++) {
+ struct vmw_display_unit *unit = units[k];
+ int clip_x1 = destX - unit->crtc.x;
+ int clip_y1 = destY - unit->crtc.y;
+ int clip_x2 = clip_x1 + surface->sizes[0].width;
+ int clip_y2 = clip_y1 + surface->sizes[0].height;
+
+ /* skip any crtcs that misses the clip region */
+ if (clip_x1 >= unit->crtc.mode.hdisplay ||
+ clip_y1 >= unit->crtc.mode.vdisplay ||
+ clip_x2 <= 0 || clip_y2 <= 0)
+ continue;
+
+ /* need to reset sid as it is changed by execbuf */
+ cmd->body.srcImage.sid = sid;
+
+ cmd->body.destScreenId = unit->unit;
+
+ /*
+ * The blit command is a lot more resilient then the
+ * readback command when it comes to clip rects. So its
+ * okay to go out of bounds.
+ */
+
+ cmd->body.destRect.left = clip_x1;
+ cmd->body.destRect.right = clip_x2;
+ cmd->body.destRect.top = clip_y1;
+ cmd->body.destRect.bottom = clip_y2;
+
+ ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
+ fifo_size, 0, NULL);
+
+ if (unlikely(ret != 0))
+ break;
+ }
+
+ kfree(cmd);
+
+ return ret;
+}
+
+int vmw_kms_readback(struct vmw_private *dev_priv,
+ struct drm_file *file_priv,
+ struct vmw_framebuffer *vfb,
+ struct drm_vmw_fence_rep __user *user_fence_rep,
+ struct drm_vmw_rect *clips,
+ uint32_t num_clips)
+{
+ struct vmw_framebuffer_dmabuf *vfbd =
+ vmw_framebuffer_to_vfbd(&vfb->base);
+ struct vmw_dma_buffer *dmabuf = vfbd->buffer;
+ struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+ struct drm_crtc *crtc;
+ size_t fifo_size;
+ int i, k, ret, num_units, blits_pos;
+
+ struct {
+ uint32_t header;
+ SVGAFifoCmdDefineGMRFB body;
+ } *cmd;
+ struct {
+ uint32_t header;
+ SVGAFifoCmdBlitScreenToGMRFB body;
+ } *blits;
+
+ num_units = 0;
+ list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, head) {
+ if (crtc->fb != &vfb->base)
+ continue;
+ units[num_units++] = vmw_crtc_to_du(crtc);
+ }
+
+ BUG_ON(dmabuf == NULL);
+ BUG_ON(!clips || !num_clips);
+
+ /* take a safe guess at fifo size */
+ fifo_size = sizeof(*cmd) + sizeof(*blits) * num_clips * num_units;
+ cmd = kmalloc(fifo_size, GFP_KERNEL);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Failed to allocate temporary fifo memory.\n");
+ return -ENOMEM;
+ }
+
+ memset(cmd, 0, fifo_size);
+ cmd->header = SVGA_CMD_DEFINE_GMRFB;
+ cmd->body.format.bitsPerPixel = vfb->base.bits_per_pixel;
+ cmd->body.format.colorDepth = vfb->base.depth;
+ cmd->body.format.reserved = 0;
+ cmd->body.bytesPerLine = vfb->base.pitch;
+ cmd->body.ptr.gmrId = vfb->user_handle;
+ cmd->body.ptr.offset = 0;
+
+ blits = (void *)&cmd[1];
+ blits_pos = 0;
+ for (i = 0; i < num_units; i++) {
+ struct drm_vmw_rect *c = clips;
+ for (k = 0; k < num_clips; k++, c++) {
+ /* transform clip coords to crtc origin based coords */
+ int clip_x1 = c->x - units[i]->crtc.x;
+ int clip_x2 = c->x - units[i]->crtc.x + c->w;
+ int clip_y1 = c->y - units[i]->crtc.y;
+ int clip_y2 = c->y - units[i]->crtc.y + c->h;
+ int dest_x = c->x;
+ int dest_y = c->y;
+
+ /* compensate for clipping, we negate
+ * a negative number and add that.
+ */
+ if (clip_x1 < 0)
+ dest_x += -clip_x1;
+ if (clip_y1 < 0)
+ dest_y += -clip_y1;
+
+ /* clip */
+ clip_x1 = max(clip_x1, 0);
+ clip_y1 = max(clip_y1, 0);
+ clip_x2 = min(clip_x2, units[i]->crtc.mode.hdisplay);
+ clip_y2 = min(clip_y2, units[i]->crtc.mode.vdisplay);
+
+ /* and cull any rects that misses the crtc */
+ if (clip_x1 >= units[i]->crtc.mode.hdisplay ||
+ clip_y1 >= units[i]->crtc.mode.vdisplay ||
+ clip_x2 <= 0 || clip_y2 <= 0)
+ continue;
+
+ blits[blits_pos].header = SVGA_CMD_BLIT_SCREEN_TO_GMRFB;
+ blits[blits_pos].body.srcScreenId = units[i]->unit;
+ blits[blits_pos].body.destOrigin.x = dest_x;
+ blits[blits_pos].body.destOrigin.y = dest_y;
+
+ blits[blits_pos].body.srcRect.left = clip_x1;
+ blits[blits_pos].body.srcRect.top = clip_y1;
+ blits[blits_pos].body.srcRect.right = clip_x2;
+ blits[blits_pos].body.srcRect.bottom = clip_y2;
+ blits_pos++;
+ }
+ }
+ /* reset size here and use calculated exact size from loops */
+ fifo_size = sizeof(*cmd) + sizeof(*blits) * blits_pos;
+
+ ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd, fifo_size,
+ 0, user_fence_rep);
+
+ kfree(cmd);
+
+ return ret;
+}
+
int vmw_kms_init(struct vmw_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
@@ -929,7 +1292,9 @@
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
- ret = vmw_kms_init_legacy_display_system(dev_priv);
+ ret = vmw_kms_init_screen_object_display(dev_priv);
+ if (ret) /* Fallback */
+ (void)vmw_kms_init_legacy_display_system(dev_priv);
return 0;
}
@@ -987,9 +1352,9 @@
return ret;
}
-void vmw_kms_write_svga(struct vmw_private *vmw_priv,
+int vmw_kms_write_svga(struct vmw_private *vmw_priv,
unsigned width, unsigned height, unsigned pitch,
- unsigned bbp, unsigned depth)
+ unsigned bpp, unsigned depth)
{
if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
vmw_write(vmw_priv, SVGA_REG_PITCHLOCK, pitch);
@@ -997,11 +1362,15 @@
iowrite32(pitch, vmw_priv->mmio_virt + SVGA_FIFO_PITCHLOCK);
vmw_write(vmw_priv, SVGA_REG_WIDTH, width);
vmw_write(vmw_priv, SVGA_REG_HEIGHT, height);
- vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, bbp);
- vmw_write(vmw_priv, SVGA_REG_DEPTH, depth);
- vmw_write(vmw_priv, SVGA_REG_RED_MASK, 0x00ff0000);
- vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
- vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
+ vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, bpp);
+
+ if (vmw_read(vmw_priv, SVGA_REG_DEPTH) != depth) {
+ DRM_ERROR("Invalid depth %u for %u bpp, host expects %u\n",
+ depth, bpp, vmw_read(vmw_priv, SVGA_REG_DEPTH));
+ return -EINVAL;
+ }
+
+ return 0;
}
int vmw_kms_save_vga(struct vmw_private *vmw_priv)
@@ -1011,12 +1380,7 @@
vmw_priv->vga_width = vmw_read(vmw_priv, SVGA_REG_WIDTH);
vmw_priv->vga_height = vmw_read(vmw_priv, SVGA_REG_HEIGHT);
- vmw_priv->vga_depth = vmw_read(vmw_priv, SVGA_REG_DEPTH);
vmw_priv->vga_bpp = vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL);
- vmw_priv->vga_pseudo = vmw_read(vmw_priv, SVGA_REG_PSEUDOCOLOR);
- vmw_priv->vga_red_mask = vmw_read(vmw_priv, SVGA_REG_RED_MASK);
- vmw_priv->vga_blue_mask = vmw_read(vmw_priv, SVGA_REG_BLUE_MASK);
- vmw_priv->vga_green_mask = vmw_read(vmw_priv, SVGA_REG_GREEN_MASK);
if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
vmw_priv->vga_pitchlock =
vmw_read(vmw_priv, SVGA_REG_PITCHLOCK);
@@ -1065,12 +1429,7 @@
vmw_write(vmw_priv, SVGA_REG_WIDTH, vmw_priv->vga_width);
vmw_write(vmw_priv, SVGA_REG_HEIGHT, vmw_priv->vga_height);
- vmw_write(vmw_priv, SVGA_REG_DEPTH, vmw_priv->vga_depth);
vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, vmw_priv->vga_bpp);
- vmw_write(vmw_priv, SVGA_REG_PSEUDOCOLOR, vmw_priv->vga_pseudo);
- vmw_write(vmw_priv, SVGA_REG_RED_MASK, vmw_priv->vga_red_mask);
- vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, vmw_priv->vga_green_mask);
- vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, vmw_priv->vga_blue_mask);
if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
vmw_write(vmw_priv, SVGA_REG_PITCHLOCK,
vmw_priv->vga_pitchlock);
@@ -1095,52 +1454,6 @@
return 0;
}
-int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct vmw_private *dev_priv = vmw_priv(dev);
- struct drm_vmw_update_layout_arg *arg =
- (struct drm_vmw_update_layout_arg *)data;
- struct vmw_master *vmaster = vmw_master(file_priv->master);
- void __user *user_rects;
- struct drm_vmw_rect *rects;
- unsigned rects_size;
- int ret;
-
- ret = ttm_read_lock(&vmaster->lock, true);
- if (unlikely(ret != 0))
- return ret;
-
- if (!arg->num_outputs) {
- struct drm_vmw_rect def_rect = {0, 0, 800, 600};
- vmw_kms_ldu_update_layout(dev_priv, 1, &def_rect);
- goto out_unlock;
- }
-
- rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect);
- rects = kzalloc(rects_size, GFP_KERNEL);
- if (unlikely(!rects)) {
- ret = -ENOMEM;
- goto out_unlock;
- }
-
- user_rects = (void __user *)(unsigned long)arg->rects;
- ret = copy_from_user(rects, user_rects, rects_size);
- if (unlikely(ret != 0)) {
- DRM_ERROR("Failed to get rects.\n");
- ret = -EFAULT;
- goto out_free;
- }
-
- vmw_kms_ldu_update_layout(dev_priv, arg->num_outputs, rects);
-
-out_free:
- kfree(rects);
-out_unlock:
- ttm_read_unlock(&vmaster->lock);
- return ret;
-}
-
bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv,
uint32_t pitch,
uint32_t height)
@@ -1148,7 +1461,265 @@
return ((u64) pitch * (u64) height) < (u64) dev_priv->vram_size;
}
+
+/**
+ * Function called by DRM code called with vbl_lock held.
+ */
u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc)
{
return 0;
}
+
+/**
+ * Function called by DRM code called with vbl_lock held.
+ */
+int vmw_enable_vblank(struct drm_device *dev, int crtc)
+{
+ return -ENOSYS;
+}
+
+/**
+ * Function called by DRM code called with vbl_lock held.
+ */
+void vmw_disable_vblank(struct drm_device *dev, int crtc)
+{
+}
+
+
+/*
+ * Small shared kms functions.
+ */
+
+int vmw_du_update_layout(struct vmw_private *dev_priv, unsigned num,
+ struct drm_vmw_rect *rects)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct vmw_display_unit *du;
+ struct drm_connector *con;
+
+ mutex_lock(&dev->mode_config.mutex);
+
+#if 0
+ {
+ unsigned int i;
+
+ DRM_INFO("%s: new layout ", __func__);
+ for (i = 0; i < num; i++)
+ DRM_INFO("(%i, %i %ux%u) ", rects[i].x, rects[i].y,
+ rects[i].w, rects[i].h);
+ DRM_INFO("\n");
+ }
+#endif
+
+ list_for_each_entry(con, &dev->mode_config.connector_list, head) {
+ du = vmw_connector_to_du(con);
+ if (num > du->unit) {
+ du->pref_width = rects[du->unit].w;
+ du->pref_height = rects[du->unit].h;
+ du->pref_active = true;
+ } else {
+ du->pref_width = 800;
+ du->pref_height = 600;
+ du->pref_active = false;
+ }
+ con->status = vmw_du_connector_detect(con, true);
+ }
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return 0;
+}
+
+void vmw_du_crtc_save(struct drm_crtc *crtc)
+{
+}
+
+void vmw_du_crtc_restore(struct drm_crtc *crtc)
+{
+}
+
+void vmw_du_crtc_gamma_set(struct drm_crtc *crtc,
+ u16 *r, u16 *g, u16 *b,
+ uint32_t start, uint32_t size)
+{
+ struct vmw_private *dev_priv = vmw_priv(crtc->dev);
+ int i;
+
+ for (i = 0; i < size; i++) {
+ DRM_DEBUG("%d r/g/b = 0x%04x / 0x%04x / 0x%04x\n", i,
+ r[i], g[i], b[i]);
+ vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 0, r[i] >> 8);
+ vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 1, g[i] >> 8);
+ vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 2, b[i] >> 8);
+ }
+}
+
+void vmw_du_connector_dpms(struct drm_connector *connector, int mode)
+{
+}
+
+void vmw_du_connector_save(struct drm_connector *connector)
+{
+}
+
+void vmw_du_connector_restore(struct drm_connector *connector)
+{
+}
+
+enum drm_connector_status
+vmw_du_connector_detect(struct drm_connector *connector, bool force)
+{
+ uint32_t num_displays;
+ struct drm_device *dev = connector->dev;
+ struct vmw_private *dev_priv = vmw_priv(dev);
+
+ mutex_lock(&dev_priv->hw_mutex);
+ num_displays = vmw_read(dev_priv, SVGA_REG_NUM_DISPLAYS);
+ mutex_unlock(&dev_priv->hw_mutex);
+
+ return ((vmw_connector_to_du(connector)->unit < num_displays) ?
+ connector_status_connected : connector_status_disconnected);
+}
+
+static struct drm_display_mode vmw_kms_connector_builtin[] = {
+ /* 640x480@60Hz */
+ { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
+ 752, 800, 0, 480, 489, 492, 525, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 800x600@60Hz */
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+ 968, 1056, 0, 600, 601, 605, 628, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1024x768@60Hz */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+ 1184, 1344, 0, 768, 771, 777, 806, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 1152x864@75Hz */
+ { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
+ 1344, 1600, 0, 864, 865, 868, 900, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x768@60Hz */
+ { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344,
+ 1472, 1664, 0, 768, 771, 778, 798, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x800@60Hz */
+ { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352,
+ 1480, 1680, 0, 800, 803, 809, 831, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
+ /* 1280x960@60Hz */
+ { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376,
+ 1488, 1800, 0, 960, 961, 964, 1000, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1280x1024@60Hz */
+ { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328,
+ 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1360x768@60Hz */
+ { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424,
+ 1536, 1792, 0, 768, 771, 777, 795, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x1050@60Hz */
+ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488,
+ 1632, 1864, 0, 1050, 1053, 1057, 1089, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1440x900@60Hz */
+ { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520,
+ 1672, 1904, 0, 900, 903, 909, 934, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1600x1200@60Hz */
+ { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664,
+ 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1680x1050@60Hz */
+ { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784,
+ 1960, 2240, 0, 1050, 1053, 1059, 1089, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1792x1344@60Hz */
+ { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920,
+ 2120, 2448, 0, 1344, 1345, 1348, 1394, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1853x1392@60Hz */
+ { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952,
+ 2176, 2528, 0, 1392, 1393, 1396, 1439, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1920x1200@60Hz */
+ { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056,
+ 2256, 2592, 0, 1200, 1203, 1209, 1245, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 1920x1440@60Hz */
+ { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048,
+ 2256, 2600, 0, 1440, 1441, 1444, 1500, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* 2560x1600@60Hz */
+ { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752,
+ 3032, 3504, 0, 1600, 1603, 1609, 1658, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ /* Terminate */
+ { DRM_MODE("", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) },
+};
+
+int vmw_du_connector_fill_modes(struct drm_connector *connector,
+ uint32_t max_width, uint32_t max_height)
+{
+ struct vmw_display_unit *du = vmw_connector_to_du(connector);
+ struct drm_device *dev = connector->dev;
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_display_mode *mode = NULL;
+ struct drm_display_mode *bmode;
+ struct drm_display_mode prefmode = { DRM_MODE("preferred",
+ DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC)
+ };
+ int i;
+
+ /* Add preferred mode */
+ {
+ mode = drm_mode_duplicate(dev, &prefmode);
+ if (!mode)
+ return 0;
+ mode->hdisplay = du->pref_width;
+ mode->vdisplay = du->pref_height;
+ mode->vrefresh = drm_mode_vrefresh(mode);
+ if (vmw_kms_validate_mode_vram(dev_priv, mode->hdisplay * 2,
+ mode->vdisplay)) {
+ drm_mode_probed_add(connector, mode);
+
+ if (du->pref_mode) {
+ list_del_init(&du->pref_mode->head);
+ drm_mode_destroy(dev, du->pref_mode);
+ }
+
+ du->pref_mode = mode;
+ }
+ }
+
+ for (i = 0; vmw_kms_connector_builtin[i].type != 0; i++) {
+ bmode = &vmw_kms_connector_builtin[i];
+ if (bmode->hdisplay > max_width ||
+ bmode->vdisplay > max_height)
+ continue;
+
+ if (!vmw_kms_validate_mode_vram(dev_priv, bmode->hdisplay * 2,
+ bmode->vdisplay))
+ continue;
+
+ mode = drm_mode_duplicate(dev, bmode);
+ if (!mode)
+ return 0;
+ mode->vrefresh = drm_mode_vrefresh(mode);
+
+ drm_mode_probed_add(connector, mode);
+ }
+
+ drm_mode_connector_list_update(connector);
+
+ return 1;
+}
+
+int vmw_du_connector_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t val)
+{
+ return 0;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
index 8a398a0..db0b901 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -31,6 +31,8 @@
#include "drmP.h"
#include "vmwgfx_drv.h"
+#define VMWGFX_NUM_DISPLAY_UNITS 8
+
#define vmw_framebuffer_to_vfb(x) \
container_of(x, struct vmw_framebuffer, base)
@@ -45,6 +47,9 @@
struct drm_framebuffer base;
int (*pin)(struct vmw_framebuffer *fb);
int (*unpin)(struct vmw_framebuffer *fb);
+ bool dmabuf;
+ struct ttm_base_object *user_obj;
+ uint32_t user_handle;
};
@@ -83,22 +88,59 @@
int hotspot_y;
unsigned unit;
+
+ /*
+ * Prefered mode tracking.
+ */
+ unsigned pref_width;
+ unsigned pref_height;
+ bool pref_active;
+ struct drm_display_mode *pref_mode;
};
+#define vmw_crtc_to_du(x) \
+ container_of(x, struct vmw_display_unit, crtc)
+#define vmw_connector_to_du(x) \
+ container_of(x, struct vmw_display_unit, connector)
+
+
/*
* Shared display unit functions - vmwgfx_kms.c
*/
void vmw_display_unit_cleanup(struct vmw_display_unit *du);
+void vmw_du_crtc_save(struct drm_crtc *crtc);
+void vmw_du_crtc_restore(struct drm_crtc *crtc);
+void vmw_du_crtc_gamma_set(struct drm_crtc *crtc,
+ u16 *r, u16 *g, u16 *b,
+ uint32_t start, uint32_t size);
int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t handle, uint32_t width, uint32_t height);
int vmw_du_crtc_cursor_move(struct drm_crtc *crtc, int x, int y);
+void vmw_du_connector_dpms(struct drm_connector *connector, int mode);
+void vmw_du_connector_save(struct drm_connector *connector);
+void vmw_du_connector_restore(struct drm_connector *connector);
+enum drm_connector_status
+vmw_du_connector_detect(struct drm_connector *connector, bool force);
+int vmw_du_connector_fill_modes(struct drm_connector *connector,
+ uint32_t max_width, uint32_t max_height);
+int vmw_du_connector_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t val);
+int vmw_du_update_layout(struct vmw_private *dev_priv, unsigned num,
+ struct drm_vmw_rect *rects);
/*
* Legacy display unit functions - vmwgfx_ldu.c
*/
int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv);
int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv);
-int vmw_kms_ldu_update_layout(struct vmw_private *dev_priv, unsigned num,
+
+/*
+ * Screen Objects display functions - vmwgfx_scrn.c
+ */
+int vmw_kms_init_screen_object_display(struct vmw_private *dev_priv);
+int vmw_kms_close_screen_object_display(struct vmw_private *dev_priv);
+int vmw_kms_sou_update_layout(struct vmw_private *dev_priv, unsigned num,
struct drm_vmw_rect *rects);
#endif
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index b3a2cd5..92f56bc 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -27,7 +27,6 @@
#include "vmwgfx_kms.h"
-#define VMWGFX_LDU_NUM_DU 8
#define vmw_crtc_to_ldu(x) \
container_of(x, struct vmw_legacy_display_unit, base.crtc)
@@ -51,11 +50,6 @@
struct vmw_legacy_display_unit {
struct vmw_display_unit base;
- unsigned pref_width;
- unsigned pref_height;
- bool pref_active;
- struct drm_display_mode *pref_mode;
-
struct list_head active;
};
@@ -71,20 +65,6 @@
* Legacy Display Unit CRTC functions
*/
-static void vmw_ldu_crtc_save(struct drm_crtc *crtc)
-{
-}
-
-static void vmw_ldu_crtc_restore(struct drm_crtc *crtc)
-{
-}
-
-static void vmw_ldu_crtc_gamma_set(struct drm_crtc *crtc,
- u16 *r, u16 *g, u16 *b,
- uint32_t start, uint32_t size)
-{
-}
-
static void vmw_ldu_crtc_destroy(struct drm_crtc *crtc)
{
vmw_ldu_destroy(vmw_crtc_to_ldu(crtc));
@@ -114,10 +94,8 @@
return 0;
fb = entry->base.crtc.fb;
- vmw_kms_write_svga(dev_priv, w, h, fb->pitch,
- fb->bits_per_pixel, fb->depth);
-
- return 0;
+ return vmw_kms_write_svga(dev_priv, w, h, fb->pitch,
+ fb->bits_per_pixel, fb->depth);
}
if (!list_empty(&lds->active)) {
@@ -265,9 +243,7 @@
vmw_ldu_del_active(dev_priv, ldu);
- vmw_ldu_commit_list(dev_priv);
-
- return 0;
+ return vmw_ldu_commit_list(dev_priv);
}
@@ -292,21 +268,20 @@
vmw_ldu_add_active(dev_priv, ldu, vfb);
- vmw_ldu_commit_list(dev_priv);
-
- return 0;
+ return vmw_ldu_commit_list(dev_priv);
}
static struct drm_crtc_funcs vmw_legacy_crtc_funcs = {
- .save = vmw_ldu_crtc_save,
- .restore = vmw_ldu_crtc_restore,
+ .save = vmw_du_crtc_save,
+ .restore = vmw_du_crtc_restore,
.cursor_set = vmw_du_crtc_cursor_set,
.cursor_move = vmw_du_crtc_cursor_move,
- .gamma_set = vmw_ldu_crtc_gamma_set,
+ .gamma_set = vmw_du_crtc_gamma_set,
.destroy = vmw_ldu_crtc_destroy,
.set_config = vmw_ldu_crtc_set_config,
};
+
/*
* Legacy Display Unit encoder functions
*/
@@ -324,183 +299,18 @@
* Legacy Display Unit connector functions
*/
-static void vmw_ldu_connector_dpms(struct drm_connector *connector, int mode)
-{
-}
-
-static void vmw_ldu_connector_save(struct drm_connector *connector)
-{
-}
-
-static void vmw_ldu_connector_restore(struct drm_connector *connector)
-{
-}
-
-static enum drm_connector_status
- vmw_ldu_connector_detect(struct drm_connector *connector,
- bool force)
-{
- if (vmw_connector_to_ldu(connector)->pref_active)
- return connector_status_connected;
- return connector_status_disconnected;
-}
-
-static const struct drm_display_mode vmw_ldu_connector_builtin[] = {
- /* 640x480@60Hz */
- { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
- 752, 800, 0, 480, 489, 492, 525, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 800x600@60Hz */
- { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
- 968, 1056, 0, 600, 601, 605, 628, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1024x768@60Hz */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
- 1184, 1344, 0, 768, 771, 777, 806, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 1152x864@75Hz */
- { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
- 1344, 1600, 0, 864, 865, 868, 900, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x768@60Hz */
- { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344,
- 1472, 1664, 0, 768, 771, 778, 798, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x800@60Hz */
- { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352,
- 1480, 1680, 0, 800, 803, 809, 831, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
- /* 1280x960@60Hz */
- { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376,
- 1488, 1800, 0, 960, 961, 964, 1000, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1280x1024@60Hz */
- { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328,
- 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1360x768@60Hz */
- { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424,
- 1536, 1792, 0, 768, 771, 777, 795, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x1050@60Hz */
- { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488,
- 1632, 1864, 0, 1050, 1053, 1057, 1089, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1440x900@60Hz */
- { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520,
- 1672, 1904, 0, 900, 903, 909, 934, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1600x1200@60Hz */
- { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664,
- 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
- DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1680x1050@60Hz */
- { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784,
- 1960, 2240, 0, 1050, 1053, 1059, 1089, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1792x1344@60Hz */
- { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920,
- 2120, 2448, 0, 1344, 1345, 1348, 1394, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1853x1392@60Hz */
- { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952,
- 2176, 2528, 0, 1392, 1393, 1396, 1439, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1920x1200@60Hz */
- { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056,
- 2256, 2592, 0, 1200, 1203, 1209, 1245, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 1920x1440@60Hz */
- { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048,
- 2256, 2600, 0, 1440, 1441, 1444, 1500, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* 2560x1600@60Hz */
- { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752,
- 3032, 3504, 0, 1600, 1603, 1609, 1658, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
- /* Terminate */
- { DRM_MODE("", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) },
-};
-
-static int vmw_ldu_connector_fill_modes(struct drm_connector *connector,
- uint32_t max_width, uint32_t max_height)
-{
- struct vmw_legacy_display_unit *ldu = vmw_connector_to_ldu(connector);
- struct drm_device *dev = connector->dev;
- struct vmw_private *dev_priv = vmw_priv(dev);
- struct drm_display_mode *mode = NULL;
- struct drm_display_mode prefmode = { DRM_MODE("preferred",
- DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC)
- };
- int i;
-
- /* Add preferred mode */
- {
- mode = drm_mode_duplicate(dev, &prefmode);
- if (!mode)
- return 0;
- mode->hdisplay = ldu->pref_width;
- mode->vdisplay = ldu->pref_height;
- mode->vrefresh = drm_mode_vrefresh(mode);
- if (vmw_kms_validate_mode_vram(dev_priv, mode->hdisplay * 2,
- mode->vdisplay)) {
- drm_mode_probed_add(connector, mode);
-
- if (ldu->pref_mode) {
- list_del_init(&ldu->pref_mode->head);
- drm_mode_destroy(dev, ldu->pref_mode);
- }
-
- ldu->pref_mode = mode;
- }
- }
-
- for (i = 0; vmw_ldu_connector_builtin[i].type != 0; i++) {
- const struct drm_display_mode *bmode;
-
- bmode = &vmw_ldu_connector_builtin[i];
- if (bmode->hdisplay > max_width ||
- bmode->vdisplay > max_height)
- continue;
-
- if (!vmw_kms_validate_mode_vram(dev_priv, bmode->hdisplay * 2,
- bmode->vdisplay))
- continue;
-
- mode = drm_mode_duplicate(dev, bmode);
- if (!mode)
- return 0;
- mode->vrefresh = drm_mode_vrefresh(mode);
-
- drm_mode_probed_add(connector, mode);
- }
-
- drm_mode_connector_list_update(connector);
-
- return 1;
-}
-
-static int vmw_ldu_connector_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t val)
-{
- return 0;
-}
-
static void vmw_ldu_connector_destroy(struct drm_connector *connector)
{
vmw_ldu_destroy(vmw_connector_to_ldu(connector));
}
static struct drm_connector_funcs vmw_legacy_connector_funcs = {
- .dpms = vmw_ldu_connector_dpms,
- .save = vmw_ldu_connector_save,
- .restore = vmw_ldu_connector_restore,
- .detect = vmw_ldu_connector_detect,
- .fill_modes = vmw_ldu_connector_fill_modes,
- .set_property = vmw_ldu_connector_set_property,
+ .dpms = vmw_du_connector_dpms,
+ .save = vmw_du_connector_save,
+ .restore = vmw_du_connector_restore,
+ .detect = vmw_du_connector_detect,
+ .fill_modes = vmw_du_connector_fill_modes,
+ .set_property = vmw_du_connector_set_property,
.destroy = vmw_ldu_connector_destroy,
};
@@ -523,14 +333,14 @@
INIT_LIST_HEAD(&ldu->active);
- ldu->pref_active = (unit == 0);
- ldu->pref_width = 800;
- ldu->pref_height = 600;
- ldu->pref_mode = NULL;
+ ldu->base.pref_active = (unit == 0);
+ ldu->base.pref_width = 800;
+ ldu->base.pref_height = 600;
+ ldu->base.pref_mode = NULL;
drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
- connector->status = vmw_ldu_connector_detect(connector, true);
+ connector->status = vmw_du_connector_detect(connector, true);
drm_encoder_init(dev, encoder, &vmw_legacy_encoder_funcs,
DRM_MODE_ENCODER_LVDS);
@@ -540,6 +350,8 @@
drm_crtc_init(dev, crtc, &vmw_legacy_crtc_funcs);
+ drm_mode_crtc_set_gamma_size(crtc, 256);
+
drm_connector_attach_property(connector,
dev->mode_config.dirty_info_property,
1);
@@ -550,8 +362,7 @@
int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
- int i;
- int ret;
+ int i, ret;
if (dev_priv->ldu_priv) {
DRM_INFO("ldu system already on\n");
@@ -559,7 +370,6 @@
}
dev_priv->ldu_priv = kmalloc(sizeof(*dev_priv->ldu_priv), GFP_KERNEL);
-
if (!dev_priv->ldu_priv)
return -ENOMEM;
@@ -568,18 +378,31 @@
dev_priv->ldu_priv->last_num_active = 0;
dev_priv->ldu_priv->fb = NULL;
- drm_mode_create_dirty_info_property(dev_priv->dev);
-
- if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
- for (i = 0; i < VMWGFX_LDU_NUM_DU; ++i)
- vmw_ldu_init(dev_priv, i);
- ret = drm_vblank_init(dev, VMWGFX_LDU_NUM_DU);
- } else {
- /* for old hardware without multimon only enable one display */
- vmw_ldu_init(dev_priv, 0);
+ /* for old hardware without multimon only enable one display */
+ if (dev_priv->capabilities & SVGA_CAP_MULTIMON)
+ ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
+ else
ret = drm_vblank_init(dev, 1);
- }
+ if (ret != 0)
+ goto err_free;
+ ret = drm_mode_create_dirty_info_property(dev);
+ if (ret != 0)
+ goto err_vblank_cleanup;
+
+ if (dev_priv->capabilities & SVGA_CAP_MULTIMON)
+ for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i)
+ vmw_ldu_init(dev_priv, i);
+ else
+ vmw_ldu_init(dev_priv, 0);
+
+ return 0;
+
+err_vblank_cleanup:
+ drm_vblank_cleanup(dev);
+err_free:
+ kfree(dev_priv->ldu_priv);
+ dev_priv->ldu_priv = NULL;
return ret;
}
@@ -587,52 +410,14 @@
{
struct drm_device *dev = dev_priv->dev;
- drm_vblank_cleanup(dev);
if (!dev_priv->ldu_priv)
return -ENOSYS;
+ drm_vblank_cleanup(dev);
+
BUG_ON(!list_empty(&dev_priv->ldu_priv->active));
kfree(dev_priv->ldu_priv);
return 0;
}
-
-int vmw_kms_ldu_update_layout(struct vmw_private *dev_priv, unsigned num,
- struct drm_vmw_rect *rects)
-{
- struct drm_device *dev = dev_priv->dev;
- struct vmw_legacy_display_unit *ldu;
- struct drm_connector *con;
- int i;
-
- mutex_lock(&dev->mode_config.mutex);
-
-#if 0
- DRM_INFO("%s: new layout ", __func__);
- for (i = 0; i < (int)num; i++)
- DRM_INFO("(%i, %i %ux%u) ", rects[i].x, rects[i].y,
- rects[i].w, rects[i].h);
- DRM_INFO("\n");
-#else
- (void)i;
-#endif
-
- list_for_each_entry(con, &dev->mode_config.connector_list, head) {
- ldu = vmw_connector_to_ldu(con);
- if (num > ldu->base.unit) {
- ldu->pref_width = rects[ldu->base.unit].w;
- ldu->pref_height = rects[ldu->base.unit].h;
- ldu->pref_active = true;
- } else {
- ldu->pref_width = 800;
- ldu->pref_height = 600;
- ldu->pref_active = false;
- }
- con->status = vmw_ldu_connector_detect(con, true);
- }
-
- mutex_unlock(&dev->mode_config.mutex);
-
- return 0;
-}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_marker.c b/drivers/gpu/drm/vmwgfx/vmwgfx_marker.c
new file mode 100644
index 0000000..8a8725c2
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_marker.c
@@ -0,0 +1,171 @@
+/**************************************************************************
+ *
+ * Copyright (C) 2010 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+
+#include "vmwgfx_drv.h"
+
+struct vmw_marker {
+ struct list_head head;
+ uint32_t seqno;
+ struct timespec submitted;
+};
+
+void vmw_marker_queue_init(struct vmw_marker_queue *queue)
+{
+ INIT_LIST_HEAD(&queue->head);
+ queue->lag = ns_to_timespec(0);
+ getrawmonotonic(&queue->lag_time);
+ spin_lock_init(&queue->lock);
+}
+
+void vmw_marker_queue_takedown(struct vmw_marker_queue *queue)
+{
+ struct vmw_marker *marker, *next;
+
+ spin_lock(&queue->lock);
+ list_for_each_entry_safe(marker, next, &queue->head, head) {
+ kfree(marker);
+ }
+ spin_unlock(&queue->lock);
+}
+
+int vmw_marker_push(struct vmw_marker_queue *queue,
+ uint32_t seqno)
+{
+ struct vmw_marker *marker = kmalloc(sizeof(*marker), GFP_KERNEL);
+
+ if (unlikely(!marker))
+ return -ENOMEM;
+
+ marker->seqno = seqno;
+ getrawmonotonic(&marker->submitted);
+ spin_lock(&queue->lock);
+ list_add_tail(&marker->head, &queue->head);
+ spin_unlock(&queue->lock);
+
+ return 0;
+}
+
+int vmw_marker_pull(struct vmw_marker_queue *queue,
+ uint32_t signaled_seqno)
+{
+ struct vmw_marker *marker, *next;
+ struct timespec now;
+ bool updated = false;
+
+ spin_lock(&queue->lock);
+ getrawmonotonic(&now);
+
+ if (list_empty(&queue->head)) {
+ queue->lag = ns_to_timespec(0);
+ queue->lag_time = now;
+ updated = true;
+ goto out_unlock;
+ }
+
+ list_for_each_entry_safe(marker, next, &queue->head, head) {
+ if (signaled_seqno - marker->seqno > (1 << 30))
+ continue;
+
+ queue->lag = timespec_sub(now, marker->submitted);
+ queue->lag_time = now;
+ updated = true;
+ list_del(&marker->head);
+ kfree(marker);
+ }
+
+out_unlock:
+ spin_unlock(&queue->lock);
+
+ return (updated) ? 0 : -EBUSY;
+}
+
+static struct timespec vmw_timespec_add(struct timespec t1,
+ struct timespec t2)
+{
+ t1.tv_sec += t2.tv_sec;
+ t1.tv_nsec += t2.tv_nsec;
+ if (t1.tv_nsec >= 1000000000L) {
+ t1.tv_sec += 1;
+ t1.tv_nsec -= 1000000000L;
+ }
+
+ return t1;
+}
+
+static struct timespec vmw_fifo_lag(struct vmw_marker_queue *queue)
+{
+ struct timespec now;
+
+ spin_lock(&queue->lock);
+ getrawmonotonic(&now);
+ queue->lag = vmw_timespec_add(queue->lag,
+ timespec_sub(now, queue->lag_time));
+ queue->lag_time = now;
+ spin_unlock(&queue->lock);
+ return queue->lag;
+}
+
+
+static bool vmw_lag_lt(struct vmw_marker_queue *queue,
+ uint32_t us)
+{
+ struct timespec lag, cond;
+
+ cond = ns_to_timespec((s64) us * 1000);
+ lag = vmw_fifo_lag(queue);
+ return (timespec_compare(&lag, &cond) < 1);
+}
+
+int vmw_wait_lag(struct vmw_private *dev_priv,
+ struct vmw_marker_queue *queue, uint32_t us)
+{
+ struct vmw_marker *marker;
+ uint32_t seqno;
+ int ret;
+
+ while (!vmw_lag_lt(queue, us)) {
+ spin_lock(&queue->lock);
+ if (list_empty(&queue->head))
+ seqno = atomic_read(&dev_priv->marker_seq);
+ else {
+ marker = list_first_entry(&queue->head,
+ struct vmw_marker, head);
+ seqno = marker->seqno;
+ }
+ spin_unlock(&queue->lock);
+
+ ret = vmw_wait_seqno(dev_priv, false, seqno, true,
+ 3*HZ);
+
+ if (unlikely(ret != 0))
+ return ret;
+
+ (void) vmw_marker_pull(queue, seqno);
+ }
+ return 0;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index 07ce02d..14399ee 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -87,48 +87,6 @@
}
/**
- * Pin or unpin a buffer in vram.
- *
- * @dev_priv: Driver private.
- * @buf: DMA buffer to pin or unpin.
- * @pin: Pin buffer in vram if true.
- * @interruptible: Use interruptible wait.
- *
- * Takes the current masters ttm lock in read.
- *
- * Returns
- * -ERESTARTSYS if interrupted by a signal.
- */
-static int vmw_dmabuf_pin_in_vram(struct vmw_private *dev_priv,
- struct vmw_dma_buffer *buf,
- bool pin, bool interruptible)
-{
- struct ttm_buffer_object *bo = &buf->base;
- struct ttm_placement *overlay_placement = &vmw_vram_placement;
- int ret;
-
- ret = ttm_read_lock(&dev_priv->active_master->lock, interruptible);
- if (unlikely(ret != 0))
- return ret;
-
- ret = ttm_bo_reserve(bo, interruptible, false, false, 0);
- if (unlikely(ret != 0))
- goto err;
-
- if (pin)
- overlay_placement = &vmw_vram_ne_placement;
-
- ret = ttm_bo_validate(bo, overlay_placement, interruptible, false, false);
-
- ttm_bo_unreserve(bo);
-
-err:
- ttm_read_unlock(&dev_priv->active_master->lock);
-
- return ret;
-}
-
-/**
* Send put command to hw.
*
* Returns
@@ -139,68 +97,80 @@
struct drm_vmw_control_stream_arg *arg,
bool interruptible)
{
+ struct vmw_escape_video_flush *flush;
+ size_t fifo_size;
+ bool have_so = dev_priv->sou_priv ? true : false;
+ int i, num_items;
+ SVGAGuestPtr ptr;
+
struct {
struct vmw_escape_header escape;
struct {
- struct {
- uint32_t cmdType;
- uint32_t streamId;
- } header;
- struct {
- uint32_t registerId;
- uint32_t value;
- } items[SVGA_VIDEO_PITCH_3 + 1];
- } body;
- struct vmw_escape_video_flush flush;
+ uint32_t cmdType;
+ uint32_t streamId;
+ } header;
} *cmds;
- uint32_t offset;
- int i, ret;
+ struct {
+ uint32_t registerId;
+ uint32_t value;
+ } *items;
- for (;;) {
- cmds = vmw_fifo_reserve(dev_priv, sizeof(*cmds));
- if (cmds)
- break;
+ /* defines are a index needs + 1 */
+ if (have_so)
+ num_items = SVGA_VIDEO_DST_SCREEN_ID + 1;
+ else
+ num_items = SVGA_VIDEO_PITCH_3 + 1;
- ret = vmw_fallback_wait(dev_priv, false, true, 0,
- interruptible, 3*HZ);
- if (interruptible && ret == -ERESTARTSYS)
- return ret;
- else
- BUG_ON(ret != 0);
+ fifo_size = sizeof(*cmds) + sizeof(*flush) + sizeof(*items) * num_items;
+
+ cmds = vmw_fifo_reserve(dev_priv, fifo_size);
+ /* hardware has hung, can't do anything here */
+ if (!cmds)
+ return -ENOMEM;
+
+ items = (typeof(items))&cmds[1];
+ flush = (struct vmw_escape_video_flush *)&items[num_items];
+
+ /* the size is header + number of items */
+ fill_escape(&cmds->escape, sizeof(*items) * (num_items + 1));
+
+ cmds->header.cmdType = SVGA_ESCAPE_VMWARE_VIDEO_SET_REGS;
+ cmds->header.streamId = arg->stream_id;
+
+ /* the IDs are neatly numbered */
+ for (i = 0; i < num_items; i++)
+ items[i].registerId = i;
+
+ vmw_bo_get_guest_ptr(&buf->base, &ptr);
+ ptr.offset += arg->offset;
+
+ items[SVGA_VIDEO_ENABLED].value = true;
+ items[SVGA_VIDEO_FLAGS].value = arg->flags;
+ items[SVGA_VIDEO_DATA_OFFSET].value = ptr.offset;
+ items[SVGA_VIDEO_FORMAT].value = arg->format;
+ items[SVGA_VIDEO_COLORKEY].value = arg->color_key;
+ items[SVGA_VIDEO_SIZE].value = arg->size;
+ items[SVGA_VIDEO_WIDTH].value = arg->width;
+ items[SVGA_VIDEO_HEIGHT].value = arg->height;
+ items[SVGA_VIDEO_SRC_X].value = arg->src.x;
+ items[SVGA_VIDEO_SRC_Y].value = arg->src.y;
+ items[SVGA_VIDEO_SRC_WIDTH].value = arg->src.w;
+ items[SVGA_VIDEO_SRC_HEIGHT].value = arg->src.h;
+ items[SVGA_VIDEO_DST_X].value = arg->dst.x;
+ items[SVGA_VIDEO_DST_Y].value = arg->dst.y;
+ items[SVGA_VIDEO_DST_WIDTH].value = arg->dst.w;
+ items[SVGA_VIDEO_DST_HEIGHT].value = arg->dst.h;
+ items[SVGA_VIDEO_PITCH_1].value = arg->pitch[0];
+ items[SVGA_VIDEO_PITCH_2].value = arg->pitch[1];
+ items[SVGA_VIDEO_PITCH_3].value = arg->pitch[2];
+ if (have_so) {
+ items[SVGA_VIDEO_DATA_GMRID].value = ptr.gmrId;
+ items[SVGA_VIDEO_DST_SCREEN_ID].value = SVGA_ID_INVALID;
}
- fill_escape(&cmds->escape, sizeof(cmds->body));
- cmds->body.header.cmdType = SVGA_ESCAPE_VMWARE_VIDEO_SET_REGS;
- cmds->body.header.streamId = arg->stream_id;
+ fill_flush(flush, arg->stream_id);
- for (i = 0; i <= SVGA_VIDEO_PITCH_3; i++)
- cmds->body.items[i].registerId = i;
-
- offset = buf->base.offset + arg->offset;
-
- cmds->body.items[SVGA_VIDEO_ENABLED].value = true;
- cmds->body.items[SVGA_VIDEO_FLAGS].value = arg->flags;
- cmds->body.items[SVGA_VIDEO_DATA_OFFSET].value = offset;
- cmds->body.items[SVGA_VIDEO_FORMAT].value = arg->format;
- cmds->body.items[SVGA_VIDEO_COLORKEY].value = arg->color_key;
- cmds->body.items[SVGA_VIDEO_SIZE].value = arg->size;
- cmds->body.items[SVGA_VIDEO_WIDTH].value = arg->width;
- cmds->body.items[SVGA_VIDEO_HEIGHT].value = arg->height;
- cmds->body.items[SVGA_VIDEO_SRC_X].value = arg->src.x;
- cmds->body.items[SVGA_VIDEO_SRC_Y].value = arg->src.y;
- cmds->body.items[SVGA_VIDEO_SRC_WIDTH].value = arg->src.w;
- cmds->body.items[SVGA_VIDEO_SRC_HEIGHT].value = arg->src.h;
- cmds->body.items[SVGA_VIDEO_DST_X].value = arg->dst.x;
- cmds->body.items[SVGA_VIDEO_DST_Y].value = arg->dst.y;
- cmds->body.items[SVGA_VIDEO_DST_WIDTH].value = arg->dst.w;
- cmds->body.items[SVGA_VIDEO_DST_HEIGHT].value = arg->dst.h;
- cmds->body.items[SVGA_VIDEO_PITCH_1].value = arg->pitch[0];
- cmds->body.items[SVGA_VIDEO_PITCH_2].value = arg->pitch[1];
- cmds->body.items[SVGA_VIDEO_PITCH_3].value = arg->pitch[2];
-
- fill_flush(&cmds->flush, arg->stream_id);
-
- vmw_fifo_commit(dev_priv, sizeof(*cmds));
+ vmw_fifo_commit(dev_priv, fifo_size);
return 0;
}
@@ -248,6 +218,25 @@
}
/**
+ * Move a buffer to vram or gmr if @pin is set, else unpin the buffer.
+ *
+ * With the introduction of screen objects buffers could now be
+ * used with GMRs instead of being locked to vram.
+ */
+static int vmw_overlay_move_buffer(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buf,
+ bool pin, bool inter)
+{
+ if (!pin)
+ return vmw_dmabuf_unpin(dev_priv, buf, inter);
+
+ if (!dev_priv->sou_priv)
+ return vmw_dmabuf_to_vram(dev_priv, buf, true, inter);
+
+ return vmw_dmabuf_to_vram_or_gmr(dev_priv, buf, true, inter);
+}
+
+/**
* Stop or pause a stream.
*
* If the stream is paused the no evict flag is removed from the buffer
@@ -279,8 +268,8 @@
return ret;
/* We just remove the NO_EVICT flag so no -ENOMEM */
- ret = vmw_dmabuf_pin_in_vram(dev_priv, stream->buf, false,
- interruptible);
+ ret = vmw_overlay_move_buffer(dev_priv, stream->buf, false,
+ interruptible);
if (interruptible && ret == -ERESTARTSYS)
return ret;
else
@@ -342,7 +331,7 @@
/* We don't start the old stream if we are interrupted.
* Might return -ENOMEM if it can't fit the buffer in vram.
*/
- ret = vmw_dmabuf_pin_in_vram(dev_priv, buf, true, interruptible);
+ ret = vmw_overlay_move_buffer(dev_priv, buf, true, interruptible);
if (ret)
return ret;
@@ -351,7 +340,8 @@
/* This one needs to happen no matter what. We only remove
* the NO_EVICT flag so this is safe from -ENOMEM.
*/
- BUG_ON(vmw_dmabuf_pin_in_vram(dev_priv, buf, false, false) != 0);
+ BUG_ON(vmw_overlay_move_buffer(dev_priv, buf, false, false)
+ != 0);
return ret;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index bfe1bcc..86c5e4c 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -31,10 +31,6 @@
#include "ttm/ttm_placement.h"
#include "drmP.h"
-#define VMW_RES_CONTEXT ttm_driver_type0
-#define VMW_RES_SURFACE ttm_driver_type1
-#define VMW_RES_STREAM ttm_driver_type2
-
struct vmw_user_context {
struct ttm_base_object base;
struct vmw_resource res;
@@ -43,6 +39,7 @@
struct vmw_user_surface {
struct ttm_base_object base;
struct vmw_surface srf;
+ uint32_t size;
};
struct vmw_user_dma_buffer {
@@ -65,6 +62,17 @@
struct vmw_stream stream;
};
+struct vmw_surface_offset {
+ uint32_t face;
+ uint32_t mip;
+ uint32_t bo_offset;
+};
+
+
+static uint64_t vmw_user_context_size;
+static uint64_t vmw_user_surface_size;
+static uint64_t vmw_user_stream_size;
+
static inline struct vmw_dma_buffer *
vmw_dma_buffer(struct ttm_buffer_object *bo)
{
@@ -84,13 +92,36 @@
return res;
}
+
+/**
+ * vmw_resource_release_id - release a resource id to the id manager.
+ *
+ * @res: Pointer to the resource.
+ *
+ * Release the resource id to the resource id manager and set it to -1
+ */
+static void vmw_resource_release_id(struct vmw_resource *res)
+{
+ struct vmw_private *dev_priv = res->dev_priv;
+
+ write_lock(&dev_priv->resource_lock);
+ if (res->id != -1)
+ idr_remove(res->idr, res->id);
+ res->id = -1;
+ write_unlock(&dev_priv->resource_lock);
+}
+
static void vmw_resource_release(struct kref *kref)
{
struct vmw_resource *res =
container_of(kref, struct vmw_resource, kref);
struct vmw_private *dev_priv = res->dev_priv;
+ int id = res->id;
+ struct idr *idr = res->idr;
- idr_remove(res->idr, res->id);
+ res->avail = false;
+ if (res->remove_from_lists != NULL)
+ res->remove_from_lists(res);
write_unlock(&dev_priv->resource_lock);
if (likely(res->hw_destroy != NULL))
@@ -102,6 +133,9 @@
kfree(res);
write_lock(&dev_priv->resource_lock);
+
+ if (id != -1)
+ idr_remove(idr, id);
}
void vmw_resource_unreference(struct vmw_resource **p_res)
@@ -115,28 +149,29 @@
write_unlock(&dev_priv->resource_lock);
}
-static int vmw_resource_init(struct vmw_private *dev_priv,
- struct vmw_resource *res,
- struct idr *idr,
- enum ttm_object_type obj_type,
- void (*res_free) (struct vmw_resource *res))
+
+/**
+ * vmw_resource_alloc_id - release a resource id to the id manager.
+ *
+ * @dev_priv: Pointer to the device private structure.
+ * @res: Pointer to the resource.
+ *
+ * Allocate the lowest free resource from the resource manager, and set
+ * @res->id to that id. Returns 0 on success and -ENOMEM on failure.
+ */
+static int vmw_resource_alloc_id(struct vmw_private *dev_priv,
+ struct vmw_resource *res)
{
int ret;
- kref_init(&res->kref);
- res->hw_destroy = NULL;
- res->res_free = res_free;
- res->res_type = obj_type;
- res->idr = idr;
- res->avail = false;
- res->dev_priv = dev_priv;
+ BUG_ON(res->id != -1);
do {
- if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0))
+ if (unlikely(idr_pre_get(res->idr, GFP_KERNEL) == 0))
return -ENOMEM;
write_lock(&dev_priv->resource_lock);
- ret = idr_get_new_above(idr, res, 1, &res->id);
+ ret = idr_get_new_above(res->idr, res, 1, &res->id);
write_unlock(&dev_priv->resource_lock);
} while (ret == -EAGAIN);
@@ -144,6 +179,33 @@
return ret;
}
+
+static int vmw_resource_init(struct vmw_private *dev_priv,
+ struct vmw_resource *res,
+ struct idr *idr,
+ enum ttm_object_type obj_type,
+ bool delay_id,
+ void (*res_free) (struct vmw_resource *res),
+ void (*remove_from_lists)
+ (struct vmw_resource *res))
+{
+ kref_init(&res->kref);
+ res->hw_destroy = NULL;
+ res->res_free = res_free;
+ res->remove_from_lists = remove_from_lists;
+ res->res_type = obj_type;
+ res->idr = idr;
+ res->avail = false;
+ res->dev_priv = dev_priv;
+ INIT_LIST_HEAD(&res->query_head);
+ INIT_LIST_HEAD(&res->validate_head);
+ res->id = -1;
+ if (delay_id)
+ return 0;
+ else
+ return vmw_resource_alloc_id(dev_priv, res);
+}
+
/**
* vmw_resource_activate
*
@@ -198,8 +260,12 @@
struct {
SVGA3dCmdHeader header;
SVGA3dCmdDestroyContext body;
- } *cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
+ } *cmd;
+
+ vmw_execbuf_release_pinned_bo(dev_priv, true, res->id);
+
+ cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
DRM_ERROR("Failed reserving FIFO space for surface "
"destruction.\n");
@@ -211,7 +277,7 @@
cmd->body.cid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
- vmw_3d_resource_dec(dev_priv);
+ vmw_3d_resource_dec(dev_priv, false);
}
static int vmw_context_init(struct vmw_private *dev_priv,
@@ -226,14 +292,17 @@
} *cmd;
ret = vmw_resource_init(dev_priv, res, &dev_priv->context_idr,
- VMW_RES_CONTEXT, res_free);
+ VMW_RES_CONTEXT, false, res_free, NULL);
if (unlikely(ret != 0)) {
- if (res_free == NULL)
- kfree(res);
- else
- res_free(res);
- return ret;
+ DRM_ERROR("Failed to allocate a resource id.\n");
+ goto out_early;
+ }
+
+ if (unlikely(res->id >= SVGA3D_MAX_CONTEXT_IDS)) {
+ DRM_ERROR("Out of hw context ids.\n");
+ vmw_resource_unreference(&res);
+ return -ENOMEM;
}
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
@@ -248,9 +317,16 @@
cmd->body.cid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
- (void) vmw_3d_resource_inc(dev_priv);
+ (void) vmw_3d_resource_inc(dev_priv, false);
vmw_resource_activate(res, vmw_hw_context_destroy);
return 0;
+
+out_early:
+ if (res_free == NULL)
+ kfree(res);
+ else
+ res_free(res);
+ return ret;
}
struct vmw_resource *vmw_context_alloc(struct vmw_private *dev_priv)
@@ -273,8 +349,11 @@
{
struct vmw_user_context *ctx =
container_of(res, struct vmw_user_context, res);
+ struct vmw_private *dev_priv = res->dev_priv;
kfree(ctx);
+ ttm_mem_global_free(vmw_mem_glob(dev_priv),
+ vmw_user_context_size);
}
/**
@@ -328,23 +407,56 @@
struct drm_file *file_priv)
{
struct vmw_private *dev_priv = vmw_priv(dev);
- struct vmw_user_context *ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ struct vmw_user_context *ctx;
struct vmw_resource *res;
struct vmw_resource *tmp;
struct drm_vmw_context_arg *arg = (struct drm_vmw_context_arg *)data;
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
int ret;
- if (unlikely(ctx == NULL))
- return -ENOMEM;
+
+ /*
+ * Approximate idr memory usage with 128 bytes. It will be limited
+ * by maximum number_of contexts anyway.
+ */
+
+ if (unlikely(vmw_user_context_size == 0))
+ vmw_user_context_size = ttm_round_pot(sizeof(*ctx)) + 128;
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ret = ttm_mem_global_alloc(vmw_mem_glob(dev_priv),
+ vmw_user_context_size,
+ false, true);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Out of graphics memory for context"
+ " creation.\n");
+ goto out_unlock;
+ }
+
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ if (unlikely(ctx == NULL)) {
+ ttm_mem_global_free(vmw_mem_glob(dev_priv),
+ vmw_user_context_size);
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
res = &ctx->res;
ctx->base.shareable = false;
ctx->base.tfile = NULL;
+ /*
+ * From here on, the destructor takes over resource freeing.
+ */
+
ret = vmw_context_init(dev_priv, res, vmw_user_context_free);
if (unlikely(ret != 0))
- return ret;
+ goto out_unlock;
tmp = vmw_resource_reference(&ctx->res);
ret = ttm_base_object_init(tfile, &ctx->base, false, VMW_RES_CONTEXT,
@@ -358,13 +470,16 @@
arg->cid = res->id;
out_err:
vmw_resource_unreference(&res);
+out_unlock:
+ ttm_read_unlock(&vmaster->lock);
return ret;
}
int vmw_context_check(struct vmw_private *dev_priv,
struct ttm_object_file *tfile,
- int id)
+ int id,
+ struct vmw_resource **p_res)
{
struct vmw_resource *res;
int ret = 0;
@@ -376,6 +491,8 @@
container_of(res, struct vmw_user_context, res);
if (ctx->base.tfile != tfile && !ctx->base.shareable)
ret = -EPERM;
+ if (p_res)
+ *p_res = vmw_resource_reference(res);
} else
ret = -EINVAL;
read_unlock(&dev_priv->resource_lock);
@@ -383,102 +500,638 @@
return ret;
}
+struct vmw_bpp {
+ uint8_t bpp;
+ uint8_t s_bpp;
+};
+
+/*
+ * Size table for the supported SVGA3D surface formats. It consists of
+ * two values. The bpp value and the s_bpp value which is short for
+ * "stride bits per pixel" The values are given in such a way that the
+ * minimum stride for the image is calculated using
+ *
+ * min_stride = w*s_bpp
+ *
+ * and the total memory requirement for the image is
+ *
+ * h*min_stride*bpp/s_bpp
+ *
+ */
+static const struct vmw_bpp vmw_sf_bpp[] = {
+ [SVGA3D_FORMAT_INVALID] = {0, 0},
+ [SVGA3D_X8R8G8B8] = {32, 32},
+ [SVGA3D_A8R8G8B8] = {32, 32},
+ [SVGA3D_R5G6B5] = {16, 16},
+ [SVGA3D_X1R5G5B5] = {16, 16},
+ [SVGA3D_A1R5G5B5] = {16, 16},
+ [SVGA3D_A4R4G4B4] = {16, 16},
+ [SVGA3D_Z_D32] = {32, 32},
+ [SVGA3D_Z_D16] = {16, 16},
+ [SVGA3D_Z_D24S8] = {32, 32},
+ [SVGA3D_Z_D15S1] = {16, 16},
+ [SVGA3D_LUMINANCE8] = {8, 8},
+ [SVGA3D_LUMINANCE4_ALPHA4] = {8, 8},
+ [SVGA3D_LUMINANCE16] = {16, 16},
+ [SVGA3D_LUMINANCE8_ALPHA8] = {16, 16},
+ [SVGA3D_DXT1] = {4, 16},
+ [SVGA3D_DXT2] = {8, 32},
+ [SVGA3D_DXT3] = {8, 32},
+ [SVGA3D_DXT4] = {8, 32},
+ [SVGA3D_DXT5] = {8, 32},
+ [SVGA3D_BUMPU8V8] = {16, 16},
+ [SVGA3D_BUMPL6V5U5] = {16, 16},
+ [SVGA3D_BUMPX8L8V8U8] = {32, 32},
+ [SVGA3D_ARGB_S10E5] = {16, 16},
+ [SVGA3D_ARGB_S23E8] = {32, 32},
+ [SVGA3D_A2R10G10B10] = {32, 32},
+ [SVGA3D_V8U8] = {16, 16},
+ [SVGA3D_Q8W8V8U8] = {32, 32},
+ [SVGA3D_CxV8U8] = {16, 16},
+ [SVGA3D_X8L8V8U8] = {32, 32},
+ [SVGA3D_A2W10V10U10] = {32, 32},
+ [SVGA3D_ALPHA8] = {8, 8},
+ [SVGA3D_R_S10E5] = {16, 16},
+ [SVGA3D_R_S23E8] = {32, 32},
+ [SVGA3D_RG_S10E5] = {16, 16},
+ [SVGA3D_RG_S23E8] = {32, 32},
+ [SVGA3D_BUFFER] = {8, 8},
+ [SVGA3D_Z_D24X8] = {32, 32},
+ [SVGA3D_V16U16] = {32, 32},
+ [SVGA3D_G16R16] = {32, 32},
+ [SVGA3D_A16B16G16R16] = {64, 64},
+ [SVGA3D_UYVY] = {12, 12},
+ [SVGA3D_YUY2] = {12, 12},
+ [SVGA3D_NV12] = {12, 8},
+ [SVGA3D_AYUV] = {32, 32},
+ [SVGA3D_BC4_UNORM] = {4, 16},
+ [SVGA3D_BC5_UNORM] = {8, 32},
+ [SVGA3D_Z_DF16] = {16, 16},
+ [SVGA3D_Z_DF24] = {24, 24},
+ [SVGA3D_Z_D24S8_INT] = {32, 32}
+};
+
/**
* Surface management.
*/
+struct vmw_surface_dma {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdSurfaceDMA body;
+ SVGA3dCopyBox cb;
+ SVGA3dCmdSurfaceDMASuffix suffix;
+};
+
+struct vmw_surface_define {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdDefineSurface body;
+};
+
+struct vmw_surface_destroy {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdDestroySurface body;
+};
+
+
+/**
+ * vmw_surface_dma_size - Compute fifo size for a dma command.
+ *
+ * @srf: Pointer to a struct vmw_surface
+ *
+ * Computes the required size for a surface dma command for backup or
+ * restoration of the surface represented by @srf.
+ */
+static inline uint32_t vmw_surface_dma_size(const struct vmw_surface *srf)
+{
+ return srf->num_sizes * sizeof(struct vmw_surface_dma);
+}
+
+
+/**
+ * vmw_surface_define_size - Compute fifo size for a surface define command.
+ *
+ * @srf: Pointer to a struct vmw_surface
+ *
+ * Computes the required size for a surface define command for the definition
+ * of the surface represented by @srf.
+ */
+static inline uint32_t vmw_surface_define_size(const struct vmw_surface *srf)
+{
+ return sizeof(struct vmw_surface_define) + srf->num_sizes *
+ sizeof(SVGA3dSize);
+}
+
+
+/**
+ * vmw_surface_destroy_size - Compute fifo size for a surface destroy command.
+ *
+ * Computes the required size for a surface destroy command for the destruction
+ * of a hw surface.
+ */
+static inline uint32_t vmw_surface_destroy_size(void)
+{
+ return sizeof(struct vmw_surface_destroy);
+}
+
+/**
+ * vmw_surface_destroy_encode - Encode a surface_destroy command.
+ *
+ * @id: The surface id
+ * @cmd_space: Pointer to memory area in which the commands should be encoded.
+ */
+static void vmw_surface_destroy_encode(uint32_t id,
+ void *cmd_space)
+{
+ struct vmw_surface_destroy *cmd = (struct vmw_surface_destroy *)
+ cmd_space;
+
+ cmd->header.id = SVGA_3D_CMD_SURFACE_DESTROY;
+ cmd->header.size = sizeof(cmd->body);
+ cmd->body.sid = id;
+}
+
+/**
+ * vmw_surface_define_encode - Encode a surface_define command.
+ *
+ * @srf: Pointer to a struct vmw_surface object.
+ * @cmd_space: Pointer to memory area in which the commands should be encoded.
+ */
+static void vmw_surface_define_encode(const struct vmw_surface *srf,
+ void *cmd_space)
+{
+ struct vmw_surface_define *cmd = (struct vmw_surface_define *)
+ cmd_space;
+ struct drm_vmw_size *src_size;
+ SVGA3dSize *cmd_size;
+ uint32_t cmd_len;
+ int i;
+
+ cmd_len = sizeof(cmd->body) + srf->num_sizes * sizeof(SVGA3dSize);
+
+ cmd->header.id = SVGA_3D_CMD_SURFACE_DEFINE;
+ cmd->header.size = cmd_len;
+ cmd->body.sid = srf->res.id;
+ cmd->body.surfaceFlags = srf->flags;
+ cmd->body.format = cpu_to_le32(srf->format);
+ for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
+ cmd->body.face[i].numMipLevels = srf->mip_levels[i];
+
+ cmd += 1;
+ cmd_size = (SVGA3dSize *) cmd;
+ src_size = srf->sizes;
+
+ for (i = 0; i < srf->num_sizes; ++i, cmd_size++, src_size++) {
+ cmd_size->width = src_size->width;
+ cmd_size->height = src_size->height;
+ cmd_size->depth = src_size->depth;
+ }
+}
+
+
+/**
+ * vmw_surface_dma_encode - Encode a surface_dma command.
+ *
+ * @srf: Pointer to a struct vmw_surface object.
+ * @cmd_space: Pointer to memory area in which the commands should be encoded.
+ * @ptr: Pointer to an SVGAGuestPtr indicating where the surface contents
+ * should be placed or read from.
+ * @to_surface: Boolean whether to DMA to the surface or from the surface.
+ */
+static void vmw_surface_dma_encode(struct vmw_surface *srf,
+ void *cmd_space,
+ const SVGAGuestPtr *ptr,
+ bool to_surface)
+{
+ uint32_t i;
+ uint32_t bpp = vmw_sf_bpp[srf->format].bpp;
+ uint32_t stride_bpp = vmw_sf_bpp[srf->format].s_bpp;
+ struct vmw_surface_dma *cmd = (struct vmw_surface_dma *)cmd_space;
+
+ for (i = 0; i < srf->num_sizes; ++i) {
+ SVGA3dCmdHeader *header = &cmd->header;
+ SVGA3dCmdSurfaceDMA *body = &cmd->body;
+ SVGA3dCopyBox *cb = &cmd->cb;
+ SVGA3dCmdSurfaceDMASuffix *suffix = &cmd->suffix;
+ const struct vmw_surface_offset *cur_offset = &srf->offsets[i];
+ const struct drm_vmw_size *cur_size = &srf->sizes[i];
+
+ header->id = SVGA_3D_CMD_SURFACE_DMA;
+ header->size = sizeof(*body) + sizeof(*cb) + sizeof(*suffix);
+
+ body->guest.ptr = *ptr;
+ body->guest.ptr.offset += cur_offset->bo_offset;
+ body->guest.pitch = (cur_size->width * stride_bpp + 7) >> 3;
+ body->host.sid = srf->res.id;
+ body->host.face = cur_offset->face;
+ body->host.mipmap = cur_offset->mip;
+ body->transfer = ((to_surface) ? SVGA3D_WRITE_HOST_VRAM :
+ SVGA3D_READ_HOST_VRAM);
+ cb->x = 0;
+ cb->y = 0;
+ cb->z = 0;
+ cb->srcx = 0;
+ cb->srcy = 0;
+ cb->srcz = 0;
+ cb->w = cur_size->width;
+ cb->h = cur_size->height;
+ cb->d = cur_size->depth;
+
+ suffix->suffixSize = sizeof(*suffix);
+ suffix->maximumOffset = body->guest.pitch*cur_size->height*
+ cur_size->depth*bpp / stride_bpp;
+ suffix->flags.discard = 0;
+ suffix->flags.unsynchronized = 0;
+ suffix->flags.reserved = 0;
+ ++cmd;
+ }
+};
+
+
static void vmw_hw_surface_destroy(struct vmw_resource *res)
{
struct vmw_private *dev_priv = res->dev_priv;
- struct {
- SVGA3dCmdHeader header;
- SVGA3dCmdDestroySurface body;
- } *cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
+ struct vmw_surface *srf;
+ void *cmd;
- if (unlikely(cmd == NULL)) {
- DRM_ERROR("Failed reserving FIFO space for surface "
- "destruction.\n");
- return;
+ if (res->id != -1) {
+
+ cmd = vmw_fifo_reserve(dev_priv, vmw_surface_destroy_size());
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Failed reserving FIFO space for surface "
+ "destruction.\n");
+ return;
+ }
+
+ vmw_surface_destroy_encode(res->id, cmd);
+ vmw_fifo_commit(dev_priv, vmw_surface_destroy_size());
+
+ /*
+ * used_memory_size_atomic, or separate lock
+ * to avoid taking dev_priv::cmdbuf_mutex in
+ * the destroy path.
+ */
+
+ mutex_lock(&dev_priv->cmdbuf_mutex);
+ srf = container_of(res, struct vmw_surface, res);
+ dev_priv->used_memory_size -= srf->backup_size;
+ mutex_unlock(&dev_priv->cmdbuf_mutex);
+
}
-
- cmd->header.id = cpu_to_le32(SVGA_3D_CMD_SURFACE_DESTROY);
- cmd->header.size = cpu_to_le32(sizeof(cmd->body));
- cmd->body.sid = cpu_to_le32(res->id);
-
- vmw_fifo_commit(dev_priv, sizeof(*cmd));
- vmw_3d_resource_dec(dev_priv);
+ vmw_3d_resource_dec(dev_priv, false);
}
void vmw_surface_res_free(struct vmw_resource *res)
{
struct vmw_surface *srf = container_of(res, struct vmw_surface, res);
+ if (srf->backup)
+ ttm_bo_unref(&srf->backup);
+ kfree(srf->offsets);
kfree(srf->sizes);
kfree(srf->snooper.image);
kfree(srf);
}
+
+/**
+ * vmw_surface_do_validate - make a surface available to the device.
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @srf: Pointer to a struct vmw_surface.
+ *
+ * If the surface doesn't have a hw id, allocate one, and optionally
+ * DMA the backed up surface contents to the device.
+ *
+ * Returns -EBUSY if there wasn't sufficient device resources to
+ * complete the validation. Retry after freeing up resources.
+ *
+ * May return other errors if the kernel is out of guest resources.
+ */
+int vmw_surface_do_validate(struct vmw_private *dev_priv,
+ struct vmw_surface *srf)
+{
+ struct vmw_resource *res = &srf->res;
+ struct list_head val_list;
+ struct ttm_validate_buffer val_buf;
+ uint32_t submit_size;
+ uint8_t *cmd;
+ int ret;
+
+ if (likely(res->id != -1))
+ return 0;
+
+ if (unlikely(dev_priv->used_memory_size + srf->backup_size >=
+ dev_priv->memory_size))
+ return -EBUSY;
+
+ /*
+ * Reserve- and validate the backup DMA bo.
+ */
+
+ if (srf->backup) {
+ INIT_LIST_HEAD(&val_list);
+ val_buf.bo = ttm_bo_reference(srf->backup);
+ val_buf.new_sync_obj_arg = (void *)((unsigned long)
+ DRM_VMW_FENCE_FLAG_EXEC);
+ list_add_tail(&val_buf.head, &val_list);
+ ret = ttm_eu_reserve_buffers(&val_list);
+ if (unlikely(ret != 0))
+ goto out_no_reserve;
+
+ ret = ttm_bo_validate(srf->backup, &vmw_srf_placement,
+ true, false, false);
+ if (unlikely(ret != 0))
+ goto out_no_validate;
+ }
+
+ /*
+ * Alloc id for the resource.
+ */
+
+ ret = vmw_resource_alloc_id(dev_priv, res);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Failed to allocate a surface id.\n");
+ goto out_no_id;
+ }
+ if (unlikely(res->id >= SVGA3D_MAX_SURFACE_IDS)) {
+ ret = -EBUSY;
+ goto out_no_fifo;
+ }
+
+
+ /*
+ * Encode surface define- and dma commands.
+ */
+
+ submit_size = vmw_surface_define_size(srf);
+ if (srf->backup)
+ submit_size += vmw_surface_dma_size(srf);
+
+ cmd = vmw_fifo_reserve(dev_priv, submit_size);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Failed reserving FIFO space for surface "
+ "validation.\n");
+ ret = -ENOMEM;
+ goto out_no_fifo;
+ }
+
+ vmw_surface_define_encode(srf, cmd);
+ if (srf->backup) {
+ SVGAGuestPtr ptr;
+
+ cmd += vmw_surface_define_size(srf);
+ vmw_bo_get_guest_ptr(srf->backup, &ptr);
+ vmw_surface_dma_encode(srf, cmd, &ptr, true);
+ }
+
+ vmw_fifo_commit(dev_priv, submit_size);
+
+ /*
+ * Create a fence object and fence the backup buffer.
+ */
+
+ if (srf->backup) {
+ struct vmw_fence_obj *fence;
+
+ (void) vmw_execbuf_fence_commands(NULL, dev_priv,
+ &fence, NULL);
+ ttm_eu_fence_buffer_objects(&val_list, fence);
+ if (likely(fence != NULL))
+ vmw_fence_obj_unreference(&fence);
+ ttm_bo_unref(&val_buf.bo);
+ ttm_bo_unref(&srf->backup);
+ }
+
+ /*
+ * Surface memory usage accounting.
+ */
+
+ dev_priv->used_memory_size += srf->backup_size;
+
+ return 0;
+
+out_no_fifo:
+ vmw_resource_release_id(res);
+out_no_id:
+out_no_validate:
+ if (srf->backup)
+ ttm_eu_backoff_reservation(&val_list);
+out_no_reserve:
+ if (srf->backup)
+ ttm_bo_unref(&val_buf.bo);
+ return ret;
+}
+
+/**
+ * vmw_surface_evict - Evict a hw surface.
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @srf: Pointer to a struct vmw_surface
+ *
+ * DMA the contents of a hw surface to a backup guest buffer object,
+ * and destroy the hw surface, releasing its id.
+ */
+int vmw_surface_evict(struct vmw_private *dev_priv,
+ struct vmw_surface *srf)
+{
+ struct vmw_resource *res = &srf->res;
+ struct list_head val_list;
+ struct ttm_validate_buffer val_buf;
+ uint32_t submit_size;
+ uint8_t *cmd;
+ int ret;
+ struct vmw_fence_obj *fence;
+ SVGAGuestPtr ptr;
+
+ BUG_ON(res->id == -1);
+
+ /*
+ * Create a surface backup buffer object.
+ */
+
+ if (!srf->backup) {
+ ret = ttm_bo_create(&dev_priv->bdev, srf->backup_size,
+ ttm_bo_type_device,
+ &vmw_srf_placement, 0, 0, true,
+ NULL, &srf->backup);
+ if (unlikely(ret != 0))
+ return ret;
+ }
+
+ /*
+ * Reserve- and validate the backup DMA bo.
+ */
+
+ INIT_LIST_HEAD(&val_list);
+ val_buf.bo = ttm_bo_reference(srf->backup);
+ val_buf.new_sync_obj_arg = (void *)(unsigned long)
+ DRM_VMW_FENCE_FLAG_EXEC;
+ list_add_tail(&val_buf.head, &val_list);
+ ret = ttm_eu_reserve_buffers(&val_list);
+ if (unlikely(ret != 0))
+ goto out_no_reserve;
+
+ ret = ttm_bo_validate(srf->backup, &vmw_srf_placement,
+ true, false, false);
+ if (unlikely(ret != 0))
+ goto out_no_validate;
+
+
+ /*
+ * Encode the dma- and surface destroy commands.
+ */
+
+ submit_size = vmw_surface_dma_size(srf) + vmw_surface_destroy_size();
+ cmd = vmw_fifo_reserve(dev_priv, submit_size);
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Failed reserving FIFO space for surface "
+ "eviction.\n");
+ ret = -ENOMEM;
+ goto out_no_fifo;
+ }
+
+ vmw_bo_get_guest_ptr(srf->backup, &ptr);
+ vmw_surface_dma_encode(srf, cmd, &ptr, false);
+ cmd += vmw_surface_dma_size(srf);
+ vmw_surface_destroy_encode(res->id, cmd);
+ vmw_fifo_commit(dev_priv, submit_size);
+
+ /*
+ * Surface memory usage accounting.
+ */
+
+ dev_priv->used_memory_size -= srf->backup_size;
+
+ /*
+ * Create a fence object and fence the DMA buffer.
+ */
+
+ (void) vmw_execbuf_fence_commands(NULL, dev_priv,
+ &fence, NULL);
+ ttm_eu_fence_buffer_objects(&val_list, fence);
+ if (likely(fence != NULL))
+ vmw_fence_obj_unreference(&fence);
+ ttm_bo_unref(&val_buf.bo);
+
+ /*
+ * Release the surface ID.
+ */
+
+ vmw_resource_release_id(res);
+
+ return 0;
+
+out_no_fifo:
+out_no_validate:
+ if (srf->backup)
+ ttm_eu_backoff_reservation(&val_list);
+out_no_reserve:
+ ttm_bo_unref(&val_buf.bo);
+ ttm_bo_unref(&srf->backup);
+ return ret;
+}
+
+
+/**
+ * vmw_surface_validate - make a surface available to the device, evicting
+ * other surfaces if needed.
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @srf: Pointer to a struct vmw_surface.
+ *
+ * Try to validate a surface and if it fails due to limited device resources,
+ * repeatedly try to evict other surfaces until the request can be
+ * acommodated.
+ *
+ * May return errors if out of resources.
+ */
+int vmw_surface_validate(struct vmw_private *dev_priv,
+ struct vmw_surface *srf)
+{
+ int ret;
+ struct vmw_surface *evict_srf;
+
+ do {
+ write_lock(&dev_priv->resource_lock);
+ list_del_init(&srf->lru_head);
+ write_unlock(&dev_priv->resource_lock);
+
+ ret = vmw_surface_do_validate(dev_priv, srf);
+ if (likely(ret != -EBUSY))
+ break;
+
+ write_lock(&dev_priv->resource_lock);
+ if (list_empty(&dev_priv->surface_lru)) {
+ DRM_ERROR("Out of device memory for surfaces.\n");
+ ret = -EBUSY;
+ write_unlock(&dev_priv->resource_lock);
+ break;
+ }
+
+ evict_srf = vmw_surface_reference
+ (list_first_entry(&dev_priv->surface_lru,
+ struct vmw_surface,
+ lru_head));
+ list_del_init(&evict_srf->lru_head);
+
+ write_unlock(&dev_priv->resource_lock);
+ (void) vmw_surface_evict(dev_priv, evict_srf);
+
+ vmw_surface_unreference(&evict_srf);
+
+ } while (1);
+
+ if (unlikely(ret != 0 && srf->res.id != -1)) {
+ write_lock(&dev_priv->resource_lock);
+ list_add_tail(&srf->lru_head, &dev_priv->surface_lru);
+ write_unlock(&dev_priv->resource_lock);
+ }
+
+ return ret;
+}
+
+
+/**
+ * vmw_surface_remove_from_lists - Remove surface resources from lookup lists
+ *
+ * @res: Pointer to a struct vmw_resource embedded in a struct vmw_surface
+ *
+ * As part of the resource destruction, remove the surface from any
+ * lookup lists.
+ */
+static void vmw_surface_remove_from_lists(struct vmw_resource *res)
+{
+ struct vmw_surface *srf = container_of(res, struct vmw_surface, res);
+
+ list_del_init(&srf->lru_head);
+}
+
int vmw_surface_init(struct vmw_private *dev_priv,
struct vmw_surface *srf,
void (*res_free) (struct vmw_resource *res))
{
int ret;
- struct {
- SVGA3dCmdHeader header;
- SVGA3dCmdDefineSurface body;
- } *cmd;
- SVGA3dSize *cmd_size;
struct vmw_resource *res = &srf->res;
- struct drm_vmw_size *src_size;
- size_t submit_size;
- uint32_t cmd_len;
- int i;
BUG_ON(res_free == NULL);
+ INIT_LIST_HEAD(&srf->lru_head);
ret = vmw_resource_init(dev_priv, res, &dev_priv->surface_idr,
- VMW_RES_SURFACE, res_free);
+ VMW_RES_SURFACE, true, res_free,
+ vmw_surface_remove_from_lists);
- if (unlikely(ret != 0)) {
+ if (unlikely(ret != 0))
res_free(res);
- return ret;
- }
- submit_size = sizeof(*cmd) + srf->num_sizes * sizeof(SVGA3dSize);
- cmd_len = sizeof(cmd->body) + srf->num_sizes * sizeof(SVGA3dSize);
+ /*
+ * The surface won't be visible to hardware until a
+ * surface validate.
+ */
- cmd = vmw_fifo_reserve(dev_priv, submit_size);
- if (unlikely(cmd == NULL)) {
- DRM_ERROR("Fifo reserve failed for create surface.\n");
- vmw_resource_unreference(&res);
- return -ENOMEM;
- }
-
- cmd->header.id = cpu_to_le32(SVGA_3D_CMD_SURFACE_DEFINE);
- cmd->header.size = cpu_to_le32(cmd_len);
- cmd->body.sid = cpu_to_le32(res->id);
- cmd->body.surfaceFlags = cpu_to_le32(srf->flags);
- cmd->body.format = cpu_to_le32(srf->format);
- for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i) {
- cmd->body.face[i].numMipLevels =
- cpu_to_le32(srf->mip_levels[i]);
- }
-
- cmd += 1;
- cmd_size = (SVGA3dSize *) cmd;
- src_size = srf->sizes;
-
- for (i = 0; i < srf->num_sizes; ++i, cmd_size++, src_size++) {
- cmd_size->width = cpu_to_le32(src_size->width);
- cmd_size->height = cpu_to_le32(src_size->height);
- cmd_size->depth = cpu_to_le32(src_size->depth);
- }
-
- vmw_fifo_commit(dev_priv, submit_size);
- (void) vmw_3d_resource_inc(dev_priv);
+ (void) vmw_3d_resource_inc(dev_priv, false);
vmw_resource_activate(res, vmw_hw_surface_destroy);
- return 0;
+ return ret;
}
static void vmw_user_surface_free(struct vmw_resource *res)
@@ -486,12 +1139,58 @@
struct vmw_surface *srf = container_of(res, struct vmw_surface, res);
struct vmw_user_surface *user_srf =
container_of(srf, struct vmw_user_surface, srf);
+ struct vmw_private *dev_priv = srf->res.dev_priv;
+ uint32_t size = user_srf->size;
+ if (srf->backup)
+ ttm_bo_unref(&srf->backup);
+ kfree(srf->offsets);
kfree(srf->sizes);
kfree(srf->snooper.image);
kfree(user_srf);
+ ttm_mem_global_free(vmw_mem_glob(dev_priv), size);
}
+/**
+ * vmw_resource_unreserve - unreserve resources previously reserved for
+ * command submission.
+ *
+ * @list_head: list of resources to unreserve.
+ *
+ * Currently only surfaces are considered, and unreserving a surface
+ * means putting it back on the device's surface lru list,
+ * so that it can be evicted if necessary.
+ * This function traverses the resource list and
+ * checks whether resources are surfaces, and in that case puts them back
+ * on the device's surface LRU list.
+ */
+void vmw_resource_unreserve(struct list_head *list)
+{
+ struct vmw_resource *res;
+ struct vmw_surface *srf;
+ rwlock_t *lock = NULL;
+
+ list_for_each_entry(res, list, validate_head) {
+
+ if (res->res_free != &vmw_surface_res_free &&
+ res->res_free != &vmw_user_surface_free)
+ continue;
+
+ if (unlikely(lock == NULL)) {
+ lock = &res->dev_priv->resource_lock;
+ write_lock(lock);
+ }
+
+ srf = container_of(res, struct vmw_surface, res);
+ list_del_init(&srf->lru_head);
+ list_add_tail(&srf->lru_head, &res->dev_priv->surface_lru);
+ }
+
+ if (lock != NULL)
+ write_unlock(lock);
+}
+
+
int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv,
struct ttm_object_file *tfile,
uint32_t handle, struct vmw_surface **out)
@@ -556,8 +1255,7 @@
struct drm_file *file_priv)
{
struct vmw_private *dev_priv = vmw_priv(dev);
- struct vmw_user_surface *user_srf =
- kmalloc(sizeof(*user_srf), GFP_KERNEL);
+ struct vmw_user_surface *user_srf;
struct vmw_surface *srf;
struct vmw_resource *res;
struct vmw_resource *tmp;
@@ -568,10 +1266,51 @@
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
struct drm_vmw_size __user *user_sizes;
int ret;
- int i;
+ int i, j;
+ uint32_t cur_bo_offset;
+ struct drm_vmw_size *cur_size;
+ struct vmw_surface_offset *cur_offset;
+ uint32_t stride_bpp;
+ uint32_t bpp;
+ uint32_t num_sizes;
+ uint32_t size;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
- if (unlikely(user_srf == NULL))
- return -ENOMEM;
+ if (unlikely(vmw_user_surface_size == 0))
+ vmw_user_surface_size = ttm_round_pot(sizeof(*user_srf)) +
+ 128;
+
+ num_sizes = 0;
+ for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
+ num_sizes += req->mip_levels[i];
+
+ if (num_sizes > DRM_VMW_MAX_SURFACE_FACES *
+ DRM_VMW_MAX_MIP_LEVELS)
+ return -EINVAL;
+
+ size = vmw_user_surface_size + 128 +
+ ttm_round_pot(num_sizes * sizeof(struct drm_vmw_size)) +
+ ttm_round_pot(num_sizes * sizeof(struct vmw_surface_offset));
+
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ret = ttm_mem_global_alloc(vmw_mem_glob(dev_priv),
+ size, false, true);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Out of graphics memory for surface"
+ " creation.\n");
+ goto out_unlock;
+ }
+
+ user_srf = kmalloc(sizeof(*user_srf), GFP_KERNEL);
+ if (unlikely(user_srf == NULL)) {
+ ret = -ENOMEM;
+ goto out_no_user_srf;
+ }
srf = &user_srf->srf;
res = &srf->res;
@@ -579,21 +1318,22 @@
srf->flags = req->flags;
srf->format = req->format;
srf->scanout = req->scanout;
- memcpy(srf->mip_levels, req->mip_levels, sizeof(srf->mip_levels));
- srf->num_sizes = 0;
- for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
- srf->num_sizes += srf->mip_levels[i];
+ srf->backup = NULL;
- if (srf->num_sizes > DRM_VMW_MAX_SURFACE_FACES *
- DRM_VMW_MAX_MIP_LEVELS) {
- ret = -EINVAL;
- goto out_err0;
- }
+ memcpy(srf->mip_levels, req->mip_levels, sizeof(srf->mip_levels));
+ srf->num_sizes = num_sizes;
+ user_srf->size = size;
srf->sizes = kmalloc(srf->num_sizes * sizeof(*srf->sizes), GFP_KERNEL);
if (unlikely(srf->sizes == NULL)) {
ret = -ENOMEM;
- goto out_err0;
+ goto out_no_sizes;
+ }
+ srf->offsets = kmalloc(srf->num_sizes * sizeof(*srf->offsets),
+ GFP_KERNEL);
+ if (unlikely(srf->sizes == NULL)) {
+ ret = -ENOMEM;
+ goto out_no_offsets;
}
user_sizes = (struct drm_vmw_size __user *)(unsigned long)
@@ -603,9 +1343,32 @@
srf->num_sizes * sizeof(*srf->sizes));
if (unlikely(ret != 0)) {
ret = -EFAULT;
- goto out_err1;
+ goto out_no_copy;
}
+ cur_bo_offset = 0;
+ cur_offset = srf->offsets;
+ cur_size = srf->sizes;
+
+ bpp = vmw_sf_bpp[srf->format].bpp;
+ stride_bpp = vmw_sf_bpp[srf->format].s_bpp;
+
+ for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i) {
+ for (j = 0; j < srf->mip_levels[i]; ++j) {
+ uint32_t stride =
+ (cur_size->width * stride_bpp + 7) >> 3;
+
+ cur_offset->face = i;
+ cur_offset->mip = j;
+ cur_offset->bo_offset = cur_bo_offset;
+ cur_bo_offset += stride * cur_size->height *
+ cur_size->depth * bpp / stride_bpp;
+ ++cur_offset;
+ ++cur_size;
+ }
+ }
+ srf->backup_size = cur_bo_offset;
+
if (srf->scanout &&
srf->num_sizes == 1 &&
srf->sizes[0].width == 64 &&
@@ -617,7 +1380,7 @@
if (!srf->snooper.image) {
DRM_ERROR("Failed to allocate cursor_image\n");
ret = -ENOMEM;
- goto out_err1;
+ goto out_no_copy;
}
} else {
srf->snooper.image = NULL;
@@ -634,7 +1397,7 @@
ret = vmw_surface_init(dev_priv, srf, vmw_user_surface_free);
if (unlikely(ret != 0))
- return ret;
+ goto out_unlock;
tmp = vmw_resource_reference(&srf->res);
ret = ttm_base_object_init(tfile, &user_srf->base,
@@ -644,7 +1407,7 @@
if (unlikely(ret != 0)) {
vmw_resource_unreference(&tmp);
vmw_resource_unreference(&res);
- return ret;
+ goto out_unlock;
}
rep->sid = user_srf->base.hash.key;
@@ -652,11 +1415,19 @@
DRM_ERROR("Created bad Surface ID.\n");
vmw_resource_unreference(&res);
+
+ ttm_read_unlock(&vmaster->lock);
return 0;
-out_err1:
+out_no_copy:
+ kfree(srf->offsets);
+out_no_offsets:
kfree(srf->sizes);
-out_err0:
+out_no_sizes:
kfree(user_srf);
+out_no_user_srf:
+ ttm_mem_global_free(vmw_mem_glob(dev_priv), size);
+out_unlock:
+ ttm_read_unlock(&vmaster->lock);
return ret;
}
@@ -970,7 +1741,7 @@
int ret;
ret = vmw_resource_init(dev_priv, res, &dev_priv->stream_idr,
- VMW_RES_STREAM, res_free);
+ VMW_RES_STREAM, false, res_free, NULL);
if (unlikely(ret != 0)) {
if (res_free == NULL)
@@ -1000,8 +1771,11 @@
{
struct vmw_user_stream *stream =
container_of(res, struct vmw_user_stream, stream.res);
+ struct vmw_private *dev_priv = res->dev_priv;
kfree(stream);
+ ttm_mem_global_free(vmw_mem_glob(dev_priv),
+ vmw_user_stream_size);
}
/**
@@ -1055,23 +1829,56 @@
struct drm_file *file_priv)
{
struct vmw_private *dev_priv = vmw_priv(dev);
- struct vmw_user_stream *stream = kmalloc(sizeof(*stream), GFP_KERNEL);
+ struct vmw_user_stream *stream;
struct vmw_resource *res;
struct vmw_resource *tmp;
struct drm_vmw_stream_arg *arg = (struct drm_vmw_stream_arg *)data;
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
int ret;
- if (unlikely(stream == NULL))
- return -ENOMEM;
+ /*
+ * Approximate idr memory usage with 128 bytes. It will be limited
+ * by maximum number_of streams anyway?
+ */
+
+ if (unlikely(vmw_user_stream_size == 0))
+ vmw_user_stream_size = ttm_round_pot(sizeof(*stream)) + 128;
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ret = ttm_mem_global_alloc(vmw_mem_glob(dev_priv),
+ vmw_user_stream_size,
+ false, true);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Out of graphics memory for stream"
+ " creation.\n");
+ goto out_unlock;
+ }
+
+
+ stream = kmalloc(sizeof(*stream), GFP_KERNEL);
+ if (unlikely(stream == NULL)) {
+ ttm_mem_global_free(vmw_mem_glob(dev_priv),
+ vmw_user_stream_size);
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
res = &stream->stream.res;
stream->base.shareable = false;
stream->base.tfile = NULL;
+ /*
+ * From here on, the destructor takes over resource freeing.
+ */
+
ret = vmw_stream_init(dev_priv, &stream->stream, vmw_user_stream_free);
if (unlikely(ret != 0))
- return ret;
+ goto out_unlock;
tmp = vmw_resource_reference(res);
ret = ttm_base_object_init(tfile, &stream->base, false, VMW_RES_STREAM,
@@ -1085,6 +1892,8 @@
arg->stream_id = res->id;
out_err:
vmw_resource_unreference(&res);
+out_unlock:
+ ttm_read_unlock(&vmaster->lock);
return ret;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
new file mode 100644
index 0000000..477b2a9
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
@@ -0,0 +1,567 @@
+/**************************************************************************
+ *
+ * Copyright © 2011 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#include "vmwgfx_kms.h"
+
+
+#define vmw_crtc_to_sou(x) \
+ container_of(x, struct vmw_screen_object_unit, base.crtc)
+#define vmw_encoder_to_sou(x) \
+ container_of(x, struct vmw_screen_object_unit, base.encoder)
+#define vmw_connector_to_sou(x) \
+ container_of(x, struct vmw_screen_object_unit, base.connector)
+
+struct vmw_screen_object_display {
+ struct list_head active;
+
+ unsigned num_active;
+ unsigned last_num_active;
+
+ struct vmw_framebuffer *fb;
+};
+
+/**
+ * Display unit using screen objects.
+ */
+struct vmw_screen_object_unit {
+ struct vmw_display_unit base;
+
+ unsigned long buffer_size; /**< Size of allocated buffer */
+ struct vmw_dma_buffer *buffer; /**< Backing store buffer */
+
+ bool defined;
+
+ struct list_head active;
+};
+
+static void vmw_sou_destroy(struct vmw_screen_object_unit *sou)
+{
+ list_del_init(&sou->active);
+ vmw_display_unit_cleanup(&sou->base);
+ kfree(sou);
+}
+
+
+/*
+ * Screen Object Display Unit CRTC functions
+ */
+
+static void vmw_sou_crtc_destroy(struct drm_crtc *crtc)
+{
+ vmw_sou_destroy(vmw_crtc_to_sou(crtc));
+}
+
+static int vmw_sou_del_active(struct vmw_private *vmw_priv,
+ struct vmw_screen_object_unit *sou)
+{
+ struct vmw_screen_object_display *ld = vmw_priv->sou_priv;
+ if (list_empty(&sou->active))
+ return 0;
+
+ /* Must init otherwise list_empty(&sou->active) will not work. */
+ list_del_init(&sou->active);
+ if (--(ld->num_active) == 0) {
+ BUG_ON(!ld->fb);
+ if (ld->fb->unpin)
+ ld->fb->unpin(ld->fb);
+ ld->fb = NULL;
+ }
+
+ return 0;
+}
+
+static int vmw_sou_add_active(struct vmw_private *vmw_priv,
+ struct vmw_screen_object_unit *sou,
+ struct vmw_framebuffer *vfb)
+{
+ struct vmw_screen_object_display *ld = vmw_priv->sou_priv;
+ struct vmw_screen_object_unit *entry;
+ struct list_head *at;
+
+ BUG_ON(!ld->num_active && ld->fb);
+ if (vfb != ld->fb) {
+ if (ld->fb && ld->fb->unpin)
+ ld->fb->unpin(ld->fb);
+ if (vfb->pin)
+ vfb->pin(vfb);
+ ld->fb = vfb;
+ }
+
+ if (!list_empty(&sou->active))
+ return 0;
+
+ at = &ld->active;
+ list_for_each_entry(entry, &ld->active, active) {
+ if (entry->base.unit > sou->base.unit)
+ break;
+
+ at = &entry->active;
+ }
+
+ list_add(&sou->active, at);
+
+ ld->num_active++;
+
+ return 0;
+}
+
+/**
+ * Send the fifo command to create a screen.
+ */
+static int vmw_sou_fifo_create(struct vmw_private *dev_priv,
+ struct vmw_screen_object_unit *sou,
+ uint32_t x, uint32_t y,
+ struct drm_display_mode *mode)
+{
+ size_t fifo_size;
+
+ struct {
+ struct {
+ uint32_t cmdType;
+ } header;
+ SVGAScreenObject obj;
+ } *cmd;
+
+ BUG_ON(!sou->buffer);
+
+ fifo_size = sizeof(*cmd);
+ cmd = vmw_fifo_reserve(dev_priv, fifo_size);
+ /* The hardware has hung, nothing we can do about it here. */
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Fifo reserve failed.\n");
+ return -ENOMEM;
+ }
+
+ memset(cmd, 0, fifo_size);
+ cmd->header.cmdType = SVGA_CMD_DEFINE_SCREEN;
+ cmd->obj.structSize = sizeof(SVGAScreenObject);
+ cmd->obj.id = sou->base.unit;
+ cmd->obj.flags = SVGA_SCREEN_HAS_ROOT |
+ (sou->base.unit == 0 ? SVGA_SCREEN_IS_PRIMARY : 0);
+ cmd->obj.size.width = mode->hdisplay;
+ cmd->obj.size.height = mode->vdisplay;
+ cmd->obj.root.x = x;
+ cmd->obj.root.y = y;
+
+ /* Ok to assume that buffer is pinned in vram */
+ vmw_bo_get_guest_ptr(&sou->buffer->base, &cmd->obj.backingStore.ptr);
+ cmd->obj.backingStore.pitch = mode->hdisplay * 4;
+
+ vmw_fifo_commit(dev_priv, fifo_size);
+
+ sou->defined = true;
+
+ return 0;
+}
+
+/**
+ * Send the fifo command to destroy a screen.
+ */
+static int vmw_sou_fifo_destroy(struct vmw_private *dev_priv,
+ struct vmw_screen_object_unit *sou)
+{
+ size_t fifo_size;
+ int ret;
+
+ struct {
+ struct {
+ uint32_t cmdType;
+ } header;
+ SVGAFifoCmdDestroyScreen body;
+ } *cmd;
+
+ /* no need to do anything */
+ if (unlikely(!sou->defined))
+ return 0;
+
+ fifo_size = sizeof(*cmd);
+ cmd = vmw_fifo_reserve(dev_priv, fifo_size);
+ /* the hardware has hung, nothing we can do about it here */
+ if (unlikely(cmd == NULL)) {
+ DRM_ERROR("Fifo reserve failed.\n");
+ return -ENOMEM;
+ }
+
+ memset(cmd, 0, fifo_size);
+ cmd->header.cmdType = SVGA_CMD_DESTROY_SCREEN;
+ cmd->body.screenId = sou->base.unit;
+
+ vmw_fifo_commit(dev_priv, fifo_size);
+
+ /* Force sync */
+ ret = vmw_fallback_wait(dev_priv, false, true, 0, false, 3*HZ);
+ if (unlikely(ret != 0))
+ DRM_ERROR("Failed to sync with HW");
+ else
+ sou->defined = false;
+
+ return ret;
+}
+
+/**
+ * Free the backing store.
+ */
+static void vmw_sou_backing_free(struct vmw_private *dev_priv,
+ struct vmw_screen_object_unit *sou)
+{
+ struct ttm_buffer_object *bo;
+
+ if (unlikely(sou->buffer == NULL))
+ return;
+
+ bo = &sou->buffer->base;
+ ttm_bo_unref(&bo);
+ sou->buffer = NULL;
+ sou->buffer_size = 0;
+}
+
+/**
+ * Allocate the backing store for the buffer.
+ */
+static int vmw_sou_backing_alloc(struct vmw_private *dev_priv,
+ struct vmw_screen_object_unit *sou,
+ unsigned long size)
+{
+ int ret;
+
+ if (sou->buffer_size == size)
+ return 0;
+
+ if (sou->buffer)
+ vmw_sou_backing_free(dev_priv, sou);
+
+ sou->buffer = kzalloc(sizeof(*sou->buffer), GFP_KERNEL);
+ if (unlikely(sou->buffer == NULL))
+ return -ENOMEM;
+
+ /* After we have alloced the backing store might not be able to
+ * resume the overlays, this is preferred to failing to alloc.
+ */
+ vmw_overlay_pause_all(dev_priv);
+ ret = vmw_dmabuf_init(dev_priv, sou->buffer, size,
+ &vmw_vram_ne_placement,
+ false, &vmw_dmabuf_bo_free);
+ vmw_overlay_resume_all(dev_priv);
+
+ if (unlikely(ret != 0))
+ sou->buffer = NULL; /* vmw_dmabuf_init frees on error */
+ else
+ sou->buffer_size = size;
+
+ return ret;
+}
+
+static int vmw_sou_crtc_set_config(struct drm_mode_set *set)
+{
+ struct vmw_private *dev_priv;
+ struct vmw_screen_object_unit *sou;
+ struct drm_connector *connector;
+ struct drm_display_mode *mode;
+ struct drm_encoder *encoder;
+ struct vmw_framebuffer *vfb;
+ struct drm_framebuffer *fb;
+ struct drm_crtc *crtc;
+ int ret = 0;
+
+ if (!set)
+ return -EINVAL;
+
+ if (!set->crtc)
+ return -EINVAL;
+
+ /* get the sou */
+ crtc = set->crtc;
+ sou = vmw_crtc_to_sou(crtc);
+ vfb = set->fb ? vmw_framebuffer_to_vfb(set->fb) : NULL;
+ dev_priv = vmw_priv(crtc->dev);
+
+ if (set->num_connectors > 1) {
+ DRM_ERROR("to many connectors\n");
+ return -EINVAL;
+ }
+
+ if (set->num_connectors == 1 &&
+ set->connectors[0] != &sou->base.connector) {
+ DRM_ERROR("connector doesn't match %p %p\n",
+ set->connectors[0], &sou->base.connector);
+ return -EINVAL;
+ }
+
+ /* sou only supports one fb active at the time */
+ if (dev_priv->sou_priv->fb && vfb &&
+ !(dev_priv->sou_priv->num_active == 1 &&
+ !list_empty(&sou->active)) &&
+ dev_priv->sou_priv->fb != vfb) {
+ DRM_ERROR("Multiple framebuffers not supported\n");
+ return -EINVAL;
+ }
+
+ /* since they always map one to one these are safe */
+ connector = &sou->base.connector;
+ encoder = &sou->base.encoder;
+
+ /* should we turn the crtc off */
+ if (set->num_connectors == 0 || !set->mode || !set->fb) {
+ ret = vmw_sou_fifo_destroy(dev_priv, sou);
+ /* the hardware has hung don't do anything more */
+ if (unlikely(ret != 0))
+ return ret;
+
+ connector->encoder = NULL;
+ encoder->crtc = NULL;
+ crtc->fb = NULL;
+ crtc->x = 0;
+ crtc->y = 0;
+
+ vmw_sou_del_active(dev_priv, sou);
+
+ vmw_sou_backing_free(dev_priv, sou);
+
+ return 0;
+ }
+
+
+ /* we now know we want to set a mode */
+ mode = set->mode;
+ fb = set->fb;
+
+ if (set->x + mode->hdisplay > fb->width ||
+ set->y + mode->vdisplay > fb->height) {
+ DRM_ERROR("set outside of framebuffer\n");
+ return -EINVAL;
+ }
+
+ vmw_fb_off(dev_priv);
+
+ if (mode->hdisplay != crtc->mode.hdisplay ||
+ mode->vdisplay != crtc->mode.vdisplay) {
+ /* no need to check if depth is different, because backing
+ * store depth is forced to 4 by the device.
+ */
+
+ ret = vmw_sou_fifo_destroy(dev_priv, sou);
+ /* the hardware has hung don't do anything more */
+ if (unlikely(ret != 0))
+ return ret;
+
+ vmw_sou_backing_free(dev_priv, sou);
+ }
+
+ if (!sou->buffer) {
+ /* forced to depth 4 by the device */
+ size_t size = mode->hdisplay * mode->vdisplay * 4;
+ ret = vmw_sou_backing_alloc(dev_priv, sou, size);
+ if (unlikely(ret != 0))
+ return ret;
+ }
+
+ ret = vmw_sou_fifo_create(dev_priv, sou, set->x, set->y, mode);
+ if (unlikely(ret != 0)) {
+ /*
+ * We are in a bit of a situation here, the hardware has
+ * hung and we may or may not have a buffer hanging of
+ * the screen object, best thing to do is not do anything
+ * if we where defined, if not just turn the crtc of.
+ * Not what userspace wants but it needs to htfu.
+ */
+ if (sou->defined)
+ return ret;
+
+ connector->encoder = NULL;
+ encoder->crtc = NULL;
+ crtc->fb = NULL;
+ crtc->x = 0;
+ crtc->y = 0;
+
+ return ret;
+ }
+
+ vmw_sou_add_active(dev_priv, sou, vfb);
+
+ connector->encoder = encoder;
+ encoder->crtc = crtc;
+ crtc->mode = *mode;
+ crtc->fb = fb;
+ crtc->x = set->x;
+ crtc->y = set->y;
+
+ return 0;
+}
+
+static struct drm_crtc_funcs vmw_screen_object_crtc_funcs = {
+ .save = vmw_du_crtc_save,
+ .restore = vmw_du_crtc_restore,
+ .cursor_set = vmw_du_crtc_cursor_set,
+ .cursor_move = vmw_du_crtc_cursor_move,
+ .gamma_set = vmw_du_crtc_gamma_set,
+ .destroy = vmw_sou_crtc_destroy,
+ .set_config = vmw_sou_crtc_set_config,
+};
+
+/*
+ * Screen Object Display Unit encoder functions
+ */
+
+static void vmw_sou_encoder_destroy(struct drm_encoder *encoder)
+{
+ vmw_sou_destroy(vmw_encoder_to_sou(encoder));
+}
+
+static struct drm_encoder_funcs vmw_screen_object_encoder_funcs = {
+ .destroy = vmw_sou_encoder_destroy,
+};
+
+/*
+ * Screen Object Display Unit connector functions
+ */
+
+static void vmw_sou_connector_destroy(struct drm_connector *connector)
+{
+ vmw_sou_destroy(vmw_connector_to_sou(connector));
+}
+
+static struct drm_connector_funcs vmw_legacy_connector_funcs = {
+ .dpms = vmw_du_connector_dpms,
+ .save = vmw_du_connector_save,
+ .restore = vmw_du_connector_restore,
+ .detect = vmw_du_connector_detect,
+ .fill_modes = vmw_du_connector_fill_modes,
+ .set_property = vmw_du_connector_set_property,
+ .destroy = vmw_sou_connector_destroy,
+};
+
+static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
+{
+ struct vmw_screen_object_unit *sou;
+ struct drm_device *dev = dev_priv->dev;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ struct drm_crtc *crtc;
+
+ sou = kzalloc(sizeof(*sou), GFP_KERNEL);
+ if (!sou)
+ return -ENOMEM;
+
+ sou->base.unit = unit;
+ crtc = &sou->base.crtc;
+ encoder = &sou->base.encoder;
+ connector = &sou->base.connector;
+
+ INIT_LIST_HEAD(&sou->active);
+
+ sou->base.pref_active = (unit == 0);
+ sou->base.pref_width = 800;
+ sou->base.pref_height = 600;
+ sou->base.pref_mode = NULL;
+
+ drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+ connector->status = vmw_du_connector_detect(connector, true);
+
+ drm_encoder_init(dev, encoder, &vmw_screen_object_encoder_funcs,
+ DRM_MODE_ENCODER_LVDS);
+ drm_mode_connector_attach_encoder(connector, encoder);
+ encoder->possible_crtcs = (1 << unit);
+ encoder->possible_clones = 0;
+
+ drm_crtc_init(dev, crtc, &vmw_screen_object_crtc_funcs);
+
+ drm_mode_crtc_set_gamma_size(crtc, 256);
+
+ drm_connector_attach_property(connector,
+ dev->mode_config.dirty_info_property,
+ 1);
+
+ return 0;
+}
+
+int vmw_kms_init_screen_object_display(struct vmw_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ int i, ret;
+
+ if (dev_priv->sou_priv) {
+ DRM_INFO("sou system already on\n");
+ return -EINVAL;
+ }
+
+ if (!(dev_priv->fifo.capabilities & SVGA_FIFO_CAP_SCREEN_OBJECT_2)) {
+ DRM_INFO("Not using screen objects,"
+ " missing cap SCREEN_OBJECT_2\n");
+ return -ENOSYS;
+ }
+
+ ret = -ENOMEM;
+ dev_priv->sou_priv = kmalloc(sizeof(*dev_priv->sou_priv), GFP_KERNEL);
+ if (unlikely(!dev_priv->sou_priv))
+ goto err_no_mem;
+
+ INIT_LIST_HEAD(&dev_priv->sou_priv->active);
+ dev_priv->sou_priv->num_active = 0;
+ dev_priv->sou_priv->last_num_active = 0;
+ dev_priv->sou_priv->fb = NULL;
+
+ ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
+ if (unlikely(ret != 0))
+ goto err_free;
+
+ ret = drm_mode_create_dirty_info_property(dev);
+ if (unlikely(ret != 0))
+ goto err_vblank_cleanup;
+
+ for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i)
+ vmw_sou_init(dev_priv, i);
+
+ DRM_INFO("Screen objects system initialized\n");
+
+ return 0;
+
+err_vblank_cleanup:
+ drm_vblank_cleanup(dev);
+err_free:
+ kfree(dev_priv->sou_priv);
+ dev_priv->sou_priv = NULL;
+err_no_mem:
+ return ret;
+}
+
+int vmw_kms_close_screen_object_display(struct vmw_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ if (!dev_priv->sou_priv)
+ return -ENOSYS;
+
+ drm_vblank_cleanup(dev);
+
+ if (!list_empty(&dev_priv->sou_priv->active))
+ DRM_ERROR("Still have active outputs when unloading driver");
+
+ kfree(dev_priv->sou_priv);
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
index 1e8eedd..d3c11f5 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
@@ -34,9 +34,8 @@
struct vmw_private *dev_priv;
if (unlikely(vma->vm_pgoff < VMWGFX_FILE_PAGE_OFFSET)) {
- if (vmw_fifo_mmap(filp, vma) == 0)
- return 0;
- return drm_mmap(filp, vma);
+ DRM_ERROR("Illegal attempt to mmap old fifo space.\n");
+ return -EINVAL;
}
file_priv = filp->private_data;
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 9bc7b03..8cdb4b4 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -458,6 +458,9 @@
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_ISO_KEYBOARD },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+ APPLE_ISO_KEYBOARD },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
@@ -508,6 +511,12 @@
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 91adcc5..848a56c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1362,6 +1362,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS) },
@@ -1374,6 +1377,7 @@
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
@@ -1942,6 +1946,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_JIS) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 1680e99..06ce996 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -112,6 +112,9 @@
#define USB_DEVICE_ID_APPLE_ALU_REVB_ANSI 0x024f
#define USB_DEVICE_ID_APPLE_ALU_REVB_ISO 0x0250
#define USB_DEVICE_ID_APPLE_ALU_REVB_JIS 0x0251
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
@@ -121,6 +124,7 @@
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO 0x0256
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index fa5d7a1..f1c909f 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -291,7 +291,6 @@
td->last_slot_field = usage->hid;
td->last_field_index = field->index;
td->last_mt_collection = usage->collection_index;
- hdev->quirks &= ~HID_QUIRK_MULTITOUCH;
return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
@@ -530,44 +529,12 @@
}
}
-/* a list of devices for which there is a specialized multitouch driver */
-static const struct hid_device_id mt_have_special_driver[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, 0x0001) },
- { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, 0x0006) },
- { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
- USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
- { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
- USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
- { }
-};
-
-static bool mt_match_one_id(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- return id->bus == hdev->bus &&
- (id->vendor == HID_ANY_ID || id->vendor == hdev->vendor) &&
- (id->product == HID_ANY_ID || id->product == hdev->product);
-}
-
-static const struct hid_device_id *mt_match_id(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- for (; id->bus; id++)
- if (mt_match_one_id(hdev, id))
- return id;
-
- return NULL;
-}
-
static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret, i;
struct mt_device *td;
struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */
- if (mt_match_id(hdev, mt_have_special_driver))
- return -ENODEV;
-
for (i = 0; mt_classes[i].name ; i++) {
if (id->driver_data == mt_classes[i].name) {
mtclass = &(mt_classes[i]);
@@ -575,6 +542,10 @@
}
}
+ /* This allows the driver to correctly support devices
+ * that emit events over several HID messages.
+ */
+ hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
td = kzalloc(sizeof(struct mt_device), GFP_KERNEL);
if (!td) {
@@ -590,16 +561,10 @@
if (ret != 0)
goto fail;
- hdev->quirks |= HID_QUIRK_MULTITOUCH;
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
goto fail;
- /* This allows the driver to correctly support devices
- * that emit events over several HID messages.
- */
- hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-
td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
GFP_KERNEL);
if (!td->slots) {
@@ -793,10 +758,6 @@
HID_USB_DEVICE(USB_VENDOR_ID_XAT,
USB_DEVICE_ID_XAT_CSR) },
- /* Rest of the world */
- { .driver_data = MT_CLS_DEFAULT,
- HID_USB_DEVICE(HID_ANY_ID, HID_ANY_ID) },
-
{ }
};
MODULE_DEVICE_TABLE(hid, mt_devices);
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index 5666e75..56ce12c 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -162,27 +162,27 @@
device = devices[minor];
- mutex_lock(&device->readers_lock);
-
if (!device) {
pr_emerg("roccat device with minor %d doesn't exist\n", minor);
error = -ENODEV;
- goto exit_err;
+ goto exit_err_devices;
}
+ mutex_lock(&device->readers_lock);
+
if (!device->open++) {
/* power on device on adding first reader */
error = hid_hw_power(device->hid, PM_HINT_FULLON);
if (error < 0) {
--device->open;
- goto exit_err;
+ goto exit_err_readers;
}
error = hid_hw_open(device->hid);
if (error < 0) {
hid_hw_power(device->hid, PM_HINT_NORMAL);
--device->open;
- goto exit_err;
+ goto exit_err_readers;
}
}
@@ -193,13 +193,13 @@
list_add_tail(&reader->node, &device->readers);
file->private_data = reader;
-exit_unlock:
+exit_err_readers:
mutex_unlock(&device->readers_lock);
+exit_err_devices:
mutex_unlock(&devices_lock);
+ if (error)
+ kfree(reader);
return error;
-exit_err:
- kfree(reader);
- goto exit_unlock;
}
static int roccat_release(struct inode *inode, struct file *file)
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 9323837..ce18c04 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -325,15 +325,6 @@
return adjust_tjmax(c, id, dev);
}
-static void __devinit get_ucode_rev_on_cpu(void *edx)
-{
- u32 eax;
-
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- sync_core();
- rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx);
-}
-
static int create_name_attr(struct platform_data *pdata, struct device *dev)
{
sysfs_attr_init(&pdata->name_attr.attr);
@@ -380,27 +371,16 @@
static int __cpuinit chk_ucode_version(unsigned int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
- int err;
- u32 edx;
/*
* Check if we have problem with errata AE18 of Core processors:
* Readings might stop update when processor visited too deep sleep,
* fixed for stepping D0 (6EC).
*/
- if (c->x86_model == 0xe && c->x86_mask < 0xc) {
- /* check for microcode update */
- err = smp_call_function_single(cpu, get_ucode_rev_on_cpu,
- &edx, 1);
- if (err) {
- pr_err("Cannot determine microcode revision of "
- "CPU#%u (%d)!\n", cpu, err);
- return -ENODEV;
- } else if (edx < 0x39) {
- pr_err("Errata AE18 not fixed, update BIOS or "
- "microcode of the CPU!\n");
- return -ENODEV;
- }
+ if (c->x86_model == 0xe && c->x86_mask < 0xc && c->microcode < 0x39) {
+ pr_err("Errata AE18 not fixed, update BIOS or "
+ "microcode of the CPU!\n");
+ return -ENODEV;
}
return 0;
}
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index a61e781..6460487 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -27,8 +27,7 @@
static struct class *hwmon_class;
-static DEFINE_IDR(hwmon_idr);
-static DEFINE_SPINLOCK(idr_lock);
+static DEFINE_IDA(hwmon_ida);
/**
* hwmon_device_register - register w/ hwmon
@@ -42,30 +41,17 @@
struct device *hwmon_device_register(struct device *dev)
{
struct device *hwdev;
- int id, err;
+ int id;
-again:
- if (unlikely(idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0))
- return ERR_PTR(-ENOMEM);
+ id = ida_simple_get(&hwmon_ida, 0, 0, GFP_KERNEL);
+ if (id < 0)
+ return ERR_PTR(id);
- spin_lock(&idr_lock);
- err = idr_get_new(&hwmon_idr, NULL, &id);
- spin_unlock(&idr_lock);
-
- if (unlikely(err == -EAGAIN))
- goto again;
- else if (unlikely(err))
- return ERR_PTR(err);
-
- id = id & MAX_ID_MASK;
hwdev = device_create(hwmon_class, dev, MKDEV(0, 0), NULL,
HWMON_ID_FORMAT, id);
- if (IS_ERR(hwdev)) {
- spin_lock(&idr_lock);
- idr_remove(&hwmon_idr, id);
- spin_unlock(&idr_lock);
- }
+ if (IS_ERR(hwdev))
+ ida_simple_remove(&hwmon_ida, id);
return hwdev;
}
@@ -81,9 +67,7 @@
if (likely(sscanf(dev_name(dev), HWMON_ID_FORMAT, &id) == 1)) {
device_unregister(dev);
- spin_lock(&idr_lock);
- idr_remove(&hwmon_idr, id);
- spin_unlock(&idr_lock);
+ ida_simple_remove(&hwmon_ida, id);
} else
dev_dbg(dev->parent,
"hwmon_device_unregister() failed: bad class ID!\n");
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index c316294..783d0c1 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -88,8 +88,7 @@
#define AEM_MIN_POWER_INTERVAL 200
#define UJ_PER_MJ 1000L
-static DEFINE_IDR(aem_idr);
-static DEFINE_SPINLOCK(aem_idr_lock);
+static DEFINE_IDA(aem_ida);
static struct platform_driver aem_driver = {
.driver = {
@@ -356,38 +355,6 @@
complete(&data->read_complete);
}
-/* ID functions */
-
-/* Obtain an id */
-static int aem_idr_get(int *id)
-{
- int i, err;
-
-again:
- if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL)))
- return -ENOMEM;
-
- spin_lock(&aem_idr_lock);
- err = idr_get_new(&aem_idr, NULL, &i);
- spin_unlock(&aem_idr_lock);
-
- if (unlikely(err == -EAGAIN))
- goto again;
- else if (unlikely(err))
- return err;
-
- *id = i & MAX_ID_MASK;
- return 0;
-}
-
-/* Release an object ID */
-static void aem_idr_put(int id)
-{
- spin_lock(&aem_idr_lock);
- idr_remove(&aem_idr, id);
- spin_unlock(&aem_idr_lock);
-}
-
/* Sensor support functions */
/* Read a sensor value */
@@ -530,7 +497,7 @@
ipmi_destroy_user(data->ipmi.user);
platform_set_drvdata(data->pdev, NULL);
platform_device_unregister(data->pdev);
- aem_idr_put(data->id);
+ ida_simple_remove(&aem_ida, data->id);
kfree(data);
}
@@ -587,7 +554,8 @@
data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
/* Create sub-device for this fw instance */
- if (aem_idr_get(&data->id))
+ data->id = ida_simple_get(&aem_ida, 0, 0, GFP_KERNEL);
+ if (data->id < 0)
goto id_err;
data->pdev = platform_device_alloc(DRVNAME, data->id);
@@ -638,7 +606,7 @@
platform_set_drvdata(data->pdev, NULL);
platform_device_unregister(data->pdev);
dev_err:
- aem_idr_put(data->id);
+ ida_simple_remove(&aem_ida, data->id);
id_err:
kfree(data);
@@ -720,7 +688,8 @@
data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
/* Create sub-device for this fw instance */
- if (aem_idr_get(&data->id))
+ data->id = ida_simple_get(&aem_ida, 0, 0, GFP_KERNEL);
+ if (data->id < 0)
goto id_err;
data->pdev = platform_device_alloc(DRVNAME, data->id);
@@ -771,7 +740,7 @@
platform_set_drvdata(data->pdev, NULL);
platform_device_unregister(data->pdev);
dev_err:
- aem_idr_put(data->id);
+ ida_simple_remove(&aem_ida, data->id);
id_err:
kfree(data);
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
index d5226c9..ef65ab5 100644
--- a/drivers/hwmon/mc13783-adc.c
+++ b/drivers/hwmon/mc13783-adc.c
@@ -31,7 +31,7 @@
#define MC13783_ADC_NAME "mc13783-adc"
struct mc13783_adc_priv {
- struct mc13783 *mc13783;
+ struct mc13xxx *mc13xxx;
struct device *hwmon_dev;
};
@@ -51,8 +51,8 @@
unsigned int sample[4];
int ret;
- ret = mc13783_adc_do_conversion(priv->mc13783,
- MC13783_ADC_MODE_MULT_CHAN,
+ ret = mc13xxx_adc_do_conversion(priv->mc13xxx,
+ MC13XXX_ADC_MODE_MULT_CHAN,
channel, sample);
if (ret)
return ret;
@@ -147,9 +147,9 @@
static int mc13783_adc_use_touchscreen(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
- unsigned flags = mc13783_get_flags(priv->mc13783);
+ unsigned flags = mc13xxx_get_flags(priv->mc13xxx);
- return flags & MC13783_USE_TOUCHSCREEN;
+ return flags & MC13XXX_USE_TOUCHSCREEN;
}
static int __init mc13783_adc_probe(struct platform_device *pdev)
@@ -161,7 +161,7 @@
if (!priv)
return -ENOMEM;
- priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+ priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
platform_set_drvdata(pdev, priv);
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index 1f29bab..c7c3128 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -2,22 +2,31 @@
# Generic HWSPINLOCK framework
#
+# HWSPINLOCK always gets selected by whoever wants it.
config HWSPINLOCK
- tristate "Generic Hardware Spinlock framework"
- depends on ARCH_OMAP4
- help
- Say y here to support the generic hardware spinlock framework.
- You only need to enable this if you have hardware spinlock module
- on your system (usually only relevant if your system has remote slave
- coprocessors).
+ tristate
- If unsure, say N.
+menu "Hardware Spinlock drivers"
config HWSPINLOCK_OMAP
tristate "OMAP Hardware Spinlock device"
- depends on HWSPINLOCK && ARCH_OMAP4
+ depends on ARCH_OMAP4
+ select HWSPINLOCK
help
Say y here to support the OMAP Hardware Spinlock device (firstly
introduced in OMAP4).
If unsure, say N.
+
+config HSEM_U8500
+ tristate "STE Hardware Semaphore functionality"
+ depends on ARCH_U8500
+ select HWSPINLOCK
+ help
+ Say y here to support the STE Hardware Semaphore functionality, which
+ provides a synchronisation mechanism for the various processor on the
+ SoC.
+
+ If unsure, say N.
+
+endmenu
diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
index 5729a3f..93eb64b 100644
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o
obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o
+obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o
diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c
index 43a6271..61c9cf1 100644
--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -26,6 +26,7 @@
#include <linux/radix-tree.h>
#include <linux/hwspinlock.h>
#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
#include "hwspinlock_internal.h"
@@ -52,10 +53,12 @@
static RADIX_TREE(hwspinlock_tree, GFP_KERNEL);
/*
- * Synchronization of access to the tree is achieved using this spinlock,
+ * Synchronization of access to the tree is achieved using this mutex,
* as the radix-tree API requires that users provide all synchronisation.
+ * A mutex is needed because we're using non-atomic radix tree allocations.
*/
-static DEFINE_SPINLOCK(hwspinlock_tree_lock);
+static DEFINE_MUTEX(hwspinlock_tree_lock);
+
/**
* __hwspin_trylock() - attempt to lock a specific hwspinlock
@@ -114,7 +117,7 @@
return -EBUSY;
/* try to take the hwspinlock device */
- ret = hwlock->ops->trylock(hwlock);
+ ret = hwlock->bank->ops->trylock(hwlock);
/* if hwlock is already taken, undo spin_trylock_* and exit */
if (!ret) {
@@ -196,8 +199,8 @@
* Allow platform-specific relax handlers to prevent
* hogging the interconnect (no sleeping, though)
*/
- if (hwlock->ops->relax)
- hwlock->ops->relax(hwlock);
+ if (hwlock->bank->ops->relax)
+ hwlock->bank->ops->relax(hwlock);
}
return ret;
@@ -242,7 +245,7 @@
*/
mb();
- hwlock->ops->unlock(hwlock);
+ hwlock->bank->ops->unlock(hwlock);
/* Undo the spin_trylock{_irq, _irqsave} called while locking */
if (mode == HWLOCK_IRQSTATE)
@@ -254,68 +257,37 @@
}
EXPORT_SYMBOL_GPL(__hwspin_unlock);
-/**
- * hwspin_lock_register() - register a new hw spinlock
- * @hwlock: hwspinlock to register.
- *
- * This function should be called from the underlying platform-specific
- * implementation, to register a new hwspinlock instance.
- *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context.
- *
- * Returns 0 on success, or an appropriate error code on failure
- */
-int hwspin_lock_register(struct hwspinlock *hwlock)
+static int hwspin_lock_register_single(struct hwspinlock *hwlock, int id)
{
struct hwspinlock *tmp;
int ret;
- if (!hwlock || !hwlock->ops ||
- !hwlock->ops->trylock || !hwlock->ops->unlock) {
- pr_err("invalid parameters\n");
- return -EINVAL;
+ mutex_lock(&hwspinlock_tree_lock);
+
+ ret = radix_tree_insert(&hwspinlock_tree, id, hwlock);
+ if (ret) {
+ if (ret == -EEXIST)
+ pr_err("hwspinlock id %d already exists!\n", id);
+ goto out;
}
- spin_lock_init(&hwlock->lock);
-
- spin_lock(&hwspinlock_tree_lock);
-
- ret = radix_tree_insert(&hwspinlock_tree, hwlock->id, hwlock);
- if (ret)
- goto out;
-
/* mark this hwspinlock as available */
- tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock->id,
- HWSPINLOCK_UNUSED);
+ tmp = radix_tree_tag_set(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
/* self-sanity check which should never fail */
WARN_ON(tmp != hwlock);
out:
- spin_unlock(&hwspinlock_tree_lock);
- return ret;
+ mutex_unlock(&hwspinlock_tree_lock);
+ return 0;
}
-EXPORT_SYMBOL_GPL(hwspin_lock_register);
-/**
- * hwspin_lock_unregister() - unregister an hw spinlock
- * @id: index of the specific hwspinlock to unregister
- *
- * This function should be called from the underlying platform-specific
- * implementation, to unregister an existing (and unused) hwspinlock.
- *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context.
- *
- * Returns the address of hwspinlock @id on success, or NULL on failure
- */
-struct hwspinlock *hwspin_lock_unregister(unsigned int id)
+static struct hwspinlock *hwspin_lock_unregister_single(unsigned int id)
{
struct hwspinlock *hwlock = NULL;
int ret;
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* make sure the hwspinlock is not in use (tag is set) */
ret = radix_tree_tag_get(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
@@ -331,9 +303,91 @@
}
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return hwlock;
}
+
+/**
+ * hwspin_lock_register() - register a new hw spinlock device
+ * @bank: the hwspinlock device, which usually provides numerous hw locks
+ * @dev: the backing device
+ * @ops: hwspinlock handlers for this device
+ * @base_id: id of the first hardware spinlock in this bank
+ * @num_locks: number of hwspinlocks provided by this device
+ *
+ * This function should be called from the underlying platform-specific
+ * implementation, to register a new hwspinlock device instance.
+ *
+ * Should be called from a process context (might sleep)
+ *
+ * Returns 0 on success, or an appropriate error code on failure
+ */
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+ const struct hwspinlock_ops *ops, int base_id, int num_locks)
+{
+ struct hwspinlock *hwlock;
+ int ret = 0, i;
+
+ if (!bank || !ops || !dev || !num_locks || !ops->trylock ||
+ !ops->unlock) {
+ pr_err("invalid parameters\n");
+ return -EINVAL;
+ }
+
+ bank->dev = dev;
+ bank->ops = ops;
+ bank->base_id = base_id;
+ bank->num_locks = num_locks;
+
+ for (i = 0; i < num_locks; i++) {
+ hwlock = &bank->lock[i];
+
+ spin_lock_init(&hwlock->lock);
+ hwlock->bank = bank;
+
+ ret = hwspin_lock_register_single(hwlock, i);
+ if (ret)
+ goto reg_failed;
+ }
+
+ return 0;
+
+reg_failed:
+ while (--i >= 0)
+ hwspin_lock_unregister_single(i);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hwspin_lock_register);
+
+/**
+ * hwspin_lock_unregister() - unregister an hw spinlock device
+ * @bank: the hwspinlock device, which usually provides numerous hw locks
+ *
+ * This function should be called from the underlying platform-specific
+ * implementation, to unregister an existing (and unused) hwspinlock.
+ *
+ * Should be called from a process context (might sleep)
+ *
+ * Returns 0 on success, or an appropriate error code on failure
+ */
+int hwspin_lock_unregister(struct hwspinlock_device *bank)
+{
+ struct hwspinlock *hwlock, *tmp;
+ int i;
+
+ for (i = 0; i < bank->num_locks; i++) {
+ hwlock = &bank->lock[i];
+
+ tmp = hwspin_lock_unregister_single(bank->base_id + i);
+ if (!tmp)
+ return -EBUSY;
+
+ /* self-sanity check that should never fail */
+ WARN_ON(tmp != hwlock);
+ }
+
+ return 0;
+}
EXPORT_SYMBOL_GPL(hwspin_lock_unregister);
/**
@@ -348,24 +402,25 @@
*/
static int __hwspin_lock_request(struct hwspinlock *hwlock)
{
+ struct device *dev = hwlock->bank->dev;
struct hwspinlock *tmp;
int ret;
/* prevent underlying implementation from being removed */
- if (!try_module_get(hwlock->owner)) {
- dev_err(hwlock->dev, "%s: can't get owner\n", __func__);
+ if (!try_module_get(dev->driver->owner)) {
+ dev_err(dev, "%s: can't get owner\n", __func__);
return -EINVAL;
}
/* notify PM core that power is now needed */
- ret = pm_runtime_get_sync(hwlock->dev);
+ ret = pm_runtime_get_sync(dev);
if (ret < 0) {
- dev_err(hwlock->dev, "%s: can't power on device\n", __func__);
+ dev_err(dev, "%s: can't power on device\n", __func__);
return ret;
}
/* mark hwspinlock as used, should not fail */
- tmp = radix_tree_tag_clear(&hwspinlock_tree, hwlock->id,
+ tmp = radix_tree_tag_clear(&hwspinlock_tree, hwlock_to_id(hwlock),
HWSPINLOCK_UNUSED);
/* self-sanity check that should never fail */
@@ -387,7 +442,7 @@
return -EINVAL;
}
- return hwlock->id;
+ return hwlock_to_id(hwlock);
}
EXPORT_SYMBOL_GPL(hwspin_lock_get_id);
@@ -400,9 +455,7 @@
* to the remote core before it can be used for synchronization (to get the
* id of a given hwlock, use hwspin_lock_get_id()).
*
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
*
* Returns the address of the assigned hwspinlock, or NULL on error
*/
@@ -411,7 +464,7 @@
struct hwspinlock *hwlock;
int ret;
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* look for an unused lock */
ret = radix_tree_gang_lookup_tag(&hwspinlock_tree, (void **)&hwlock,
@@ -431,7 +484,7 @@
hwlock = NULL;
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return hwlock;
}
EXPORT_SYMBOL_GPL(hwspin_lock_request);
@@ -445,9 +498,7 @@
* Usually early board code will be calling this function in order to
* reserve specific hwspinlock ids for predefined purposes.
*
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
*
* Returns the address of the assigned hwspinlock, or NULL on error
*/
@@ -456,7 +507,7 @@
struct hwspinlock *hwlock;
int ret;
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* make sure this hwspinlock exists */
hwlock = radix_tree_lookup(&hwspinlock_tree, id);
@@ -466,7 +517,7 @@
}
/* sanity check (this shouldn't happen) */
- WARN_ON(hwlock->id != id);
+ WARN_ON(hwlock_to_id(hwlock) != id);
/* make sure this hwspinlock is unused */
ret = radix_tree_tag_get(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
@@ -482,7 +533,7 @@
hwlock = NULL;
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return hwlock;
}
EXPORT_SYMBOL_GPL(hwspin_lock_request_specific);
@@ -495,14 +546,13 @@
* Should only be called with an @hwlock that was retrieved from
* an earlier call to omap_hwspin_lock_request{_specific}.
*
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
*
* Returns 0 on success, or an appropriate error code on failure
*/
int hwspin_lock_free(struct hwspinlock *hwlock)
{
+ struct device *dev = hwlock->bank->dev;
struct hwspinlock *tmp;
int ret;
@@ -511,34 +561,34 @@
return -EINVAL;
}
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* make sure the hwspinlock is used */
- ret = radix_tree_tag_get(&hwspinlock_tree, hwlock->id,
+ ret = radix_tree_tag_get(&hwspinlock_tree, hwlock_to_id(hwlock),
HWSPINLOCK_UNUSED);
if (ret == 1) {
- dev_err(hwlock->dev, "%s: hwlock is already free\n", __func__);
+ dev_err(dev, "%s: hwlock is already free\n", __func__);
dump_stack();
ret = -EINVAL;
goto out;
}
/* notify the underlying device that power is not needed */
- ret = pm_runtime_put(hwlock->dev);
+ ret = pm_runtime_put(dev);
if (ret < 0)
goto out;
/* mark this hwspinlock as available */
- tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock->id,
+ tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock_to_id(hwlock),
HWSPINLOCK_UNUSED);
/* sanity check (this shouldn't happen) */
WARN_ON(tmp != hwlock);
- module_put(hwlock->owner);
+ module_put(dev->driver->owner);
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return ret;
}
EXPORT_SYMBOL_GPL(hwspin_lock_free);
diff --git a/drivers/hwspinlock/hwspinlock_internal.h b/drivers/hwspinlock/hwspinlock_internal.h
index 69935e6b..d26f78b 100644
--- a/drivers/hwspinlock/hwspinlock_internal.h
+++ b/drivers/hwspinlock/hwspinlock_internal.h
@@ -21,6 +21,8 @@
#include <linux/spinlock.h>
#include <linux/device.h>
+struct hwspinlock_device;
+
/**
* struct hwspinlock_ops - platform-specific hwspinlock handlers
*
@@ -39,23 +41,37 @@
/**
* struct hwspinlock - this struct represents a single hwspinlock instance
- *
- * @dev: underlying device, will be used to invoke runtime PM api
- * @ops: platform-specific hwspinlock handlers
- * @id: a global, unique, system-wide, index of the lock.
+ * @bank: the hwspinlock_device structure which owns this lock
* @lock: initialized and used by hwspinlock core
- * @owner: underlying implementation module, used to maintain module ref count
- *
- * Note: currently simplicity was opted for, but later we can squeeze some
- * memory bytes by grouping the dev, ops and owner members in a single
- * per-platform struct, and have all hwspinlocks point at it.
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
*/
struct hwspinlock {
+ struct hwspinlock_device *bank;
+ spinlock_t lock;
+ void *priv;
+};
+
+/**
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
+ */
+struct hwspinlock_device {
struct device *dev;
const struct hwspinlock_ops *ops;
- int id;
- spinlock_t lock;
- struct module *owner;
+ int base_id;
+ int num_locks;
+ struct hwspinlock lock[0];
};
+static inline int hwlock_to_id(struct hwspinlock *hwlock)
+{
+ int local_id = hwlock - &hwlock->bank->lock[0];
+
+ return hwlock->bank->base_id + local_id;
+}
+
#endif /* __HWSPINLOCK_HWSPINLOCK_H */
diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
index a8f0273..887d34e 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -41,33 +41,20 @@
#define SPINLOCK_NOTTAKEN (0) /* free */
#define SPINLOCK_TAKEN (1) /* locked */
-#define to_omap_hwspinlock(lock) \
- container_of(lock, struct omap_hwspinlock, lock)
-
-struct omap_hwspinlock {
- struct hwspinlock lock;
- void __iomem *addr;
-};
-
-struct omap_hwspinlock_state {
- int num_locks; /* Total number of locks in system */
- void __iomem *io_base; /* Mapped base address */
-};
-
static int omap_hwspinlock_trylock(struct hwspinlock *lock)
{
- struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
+ void __iomem *lock_addr = lock->priv;
/* attempt to acquire the lock by reading its value */
- return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr));
+ return (SPINLOCK_NOTTAKEN == readl(lock_addr));
}
static void omap_hwspinlock_unlock(struct hwspinlock *lock)
{
- struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
+ void __iomem *lock_addr = lock->priv;
/* release the lock by writing 0 to it */
- writel(SPINLOCK_NOTTAKEN, omap_lock->addr);
+ writel(SPINLOCK_NOTTAKEN, lock_addr);
}
/*
@@ -93,26 +80,23 @@
static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
{
- struct omap_hwspinlock *omap_lock;
- struct omap_hwspinlock_state *state;
- struct hwspinlock *lock;
+ struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+ struct hwspinlock_device *bank;
+ struct hwspinlock *hwlock;
struct resource *res;
void __iomem *io_base;
- int i, ret;
+ int num_locks, i, ret;
+
+ if (!pdata)
+ return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
- state = kzalloc(sizeof(*state), GFP_KERNEL);
- if (!state)
- return -ENOMEM;
-
io_base = ioremap(res->start, resource_size(res));
- if (!io_base) {
- ret = -ENOMEM;
- goto free_state;
- }
+ if (!io_base)
+ return -ENOMEM;
/* Determine number of locks */
i = readl(io_base + SYSSTATUS_OFFSET);
@@ -124,10 +108,18 @@
goto iounmap_base;
}
- state->num_locks = i * 32;
- state->io_base = io_base;
+ num_locks = i * 32; /* actual number of locks in this device */
- platform_set_drvdata(pdev, state);
+ bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
+ if (!bank) {
+ ret = -ENOMEM;
+ goto iounmap_base;
+ }
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+ hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
/*
* runtime PM will make sure the clock of this module is
@@ -135,79 +127,46 @@
*/
pm_runtime_enable(&pdev->dev);
- for (i = 0; i < state->num_locks; i++) {
- omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL);
- if (!omap_lock) {
- ret = -ENOMEM;
- goto free_locks;
- }
-
- omap_lock->lock.dev = &pdev->dev;
- omap_lock->lock.owner = THIS_MODULE;
- omap_lock->lock.id = i;
- omap_lock->lock.ops = &omap_hwspinlock_ops;
- omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
-
- ret = hwspin_lock_register(&omap_lock->lock);
- if (ret) {
- kfree(omap_lock);
- goto free_locks;
- }
- }
+ ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
+ pdata->base_id, num_locks);
+ if (ret)
+ goto reg_fail;
return 0;
-free_locks:
- while (--i >= 0) {
- lock = hwspin_lock_unregister(i);
- /* this should't happen, but let's give our best effort */
- if (!lock) {
- dev_err(&pdev->dev, "%s: cleanups failed\n", __func__);
- continue;
- }
- omap_lock = to_omap_hwspinlock(lock);
- kfree(omap_lock);
- }
+reg_fail:
pm_runtime_disable(&pdev->dev);
+ kfree(bank);
iounmap_base:
iounmap(io_base);
-free_state:
- kfree(state);
return ret;
}
-static int omap_hwspinlock_remove(struct platform_device *pdev)
+static int __devexit omap_hwspinlock_remove(struct platform_device *pdev)
{
- struct omap_hwspinlock_state *state = platform_get_drvdata(pdev);
- struct hwspinlock *lock;
- struct omap_hwspinlock *omap_lock;
- int i;
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
+ int ret;
- for (i = 0; i < state->num_locks; i++) {
- lock = hwspin_lock_unregister(i);
- /* this shouldn't happen at this point. if it does, at least
- * don't continue with the remove */
- if (!lock) {
- dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i);
- return -EBUSY;
- }
-
- omap_lock = to_omap_hwspinlock(lock);
- kfree(omap_lock);
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
}
pm_runtime_disable(&pdev->dev);
- iounmap(state->io_base);
- kfree(state);
+ iounmap(io_base);
+ kfree(bank);
return 0;
}
static struct platform_driver omap_hwspinlock_driver = {
.probe = omap_hwspinlock_probe,
- .remove = omap_hwspinlock_remove,
+ .remove = __devexit_p(omap_hwspinlock_remove),
.driver = {
.name = "omap_hwspinlock",
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c
new file mode 100644
index 0000000..143461a
--- /dev/null
+++ b/drivers/hwspinlock/u8500_hsem.c
@@ -0,0 +1,198 @@
+/*
+ * u8500 HWSEM driver
+ *
+ * Copyright (C) 2010-2011 ST-Ericsson
+ *
+ * Implements u8500 semaphore handling for protocol 1, no interrupts.
+ *
+ * Author: Mathieu Poirier <mathieu.poirier@linaro.org>
+ * Heavily borrowed from the work of :
+ * Simon Que <sque@ti.com>
+ * Hari Kanigeri <h-kanigeri2@ti.com>
+ * Ohad Ben-Cohen <ohad@wizery.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/platform_device.h>
+
+#include "hwspinlock_internal.h"
+
+/*
+ * Implementation of STE's HSem protocol 1 without interrutps.
+ * The only masterID we allow is '0x01' to force people to use
+ * HSems for synchronisation between processors rather than processes
+ * on the ARM core.
+ */
+
+#define U8500_MAX_SEMAPHORE 32 /* a total of 32 semaphore */
+#define RESET_SEMAPHORE (0) /* free */
+
+/*
+ * CPU ID for master running u8500 kernel.
+ * Hswpinlocks should only be used to synchonise operations
+ * between the Cortex A9 core and the other CPUs. Hence
+ * forcing the masterID to a preset value.
+ */
+#define HSEM_MASTER_ID 0x01
+
+#define HSEM_REGISTER_OFFSET 0x08
+
+#define HSEM_CTRL_REG 0x00
+#define HSEM_ICRALL 0x90
+#define HSEM_PROTOCOL_1 0x01
+
+static int u8500_hsem_trylock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = lock->priv;
+
+ writel(HSEM_MASTER_ID, lock_addr);
+
+ /* get only first 4 bit and compare to masterID.
+ * if equal, we have the semaphore, otherwise
+ * someone else has it.
+ */
+ return (HSEM_MASTER_ID == (0x0F & readl(lock_addr)));
+}
+
+static void u8500_hsem_unlock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = lock->priv;
+
+ /* release the lock by writing 0 to it */
+ writel(RESET_SEMAPHORE, lock_addr);
+}
+
+/*
+ * u8500: what value is recommended here ?
+ */
+static void u8500_hsem_relax(struct hwspinlock *lock)
+{
+ ndelay(50);
+}
+
+static const struct hwspinlock_ops u8500_hwspinlock_ops = {
+ .trylock = u8500_hsem_trylock,
+ .unlock = u8500_hsem_unlock,
+ .relax = u8500_hsem_relax,
+};
+
+static int __devinit u8500_hsem_probe(struct platform_device *pdev)
+{
+ struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+ struct hwspinlock_device *bank;
+ struct hwspinlock *hwlock;
+ struct resource *res;
+ void __iomem *io_base;
+ int i, ret, num_locks = U8500_MAX_SEMAPHORE;
+ ulong val;
+
+ if (!pdata)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ io_base = ioremap(res->start, resource_size(res));
+ if (!io_base) {
+ ret = -ENOMEM;
+ goto free_state;
+ }
+
+ /* make sure protocol 1 is selected */
+ val = readl(io_base + HSEM_CTRL_REG);
+ writel((val & ~HSEM_PROTOCOL_1), io_base + HSEM_CTRL_REG);
+
+ /* clear all interrupts */
+ writel(0xFFFF, io_base + HSEM_ICRALL);
+
+ bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
+ if (!bank) {
+ ret = -ENOMEM;
+ goto iounmap_base;
+ }
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+ hwlock->priv = io_base + HSEM_REGISTER_OFFSET + sizeof(u32) * i;
+
+ /* no pm needed for HSem but required to comply with hwspilock core */
+ pm_runtime_enable(&pdev->dev);
+
+ ret = hwspin_lock_register(bank, &pdev->dev, &u8500_hwspinlock_ops,
+ pdata->base_id, num_locks);
+ if (ret)
+ goto reg_fail;
+
+ return 0;
+
+reg_fail:
+ pm_runtime_disable(&pdev->dev);
+ kfree(bank);
+iounmap_base:
+ iounmap(io_base);
+ return ret;
+}
+
+static int __devexit u8500_hsem_remove(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ void __iomem *io_base = bank->lock[0].priv - HSEM_REGISTER_OFFSET;
+ int ret;
+
+ /* clear all interrupts */
+ writel(0xFFFF, io_base + HSEM_ICRALL);
+
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ pm_runtime_disable(&pdev->dev);
+ iounmap(io_base);
+ kfree(bank);
+
+ return 0;
+}
+
+static struct platform_driver u8500_hsem_driver = {
+ .probe = u8500_hsem_probe,
+ .remove = __devexit_p(u8500_hsem_remove),
+ .driver = {
+ .name = "u8500_hsem",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init u8500_hsem_init(void)
+{
+ return platform_driver_register(&u8500_hsem_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(u8500_hsem_init);
+
+static void __exit u8500_hsem_exit(void)
+{
+ platform_driver_unregister(&u8500_hsem_driver);
+}
+module_exit(u8500_hsem_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware Spinlock driver for u8500");
+MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@linaro.org>");
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index d6d5868..85584a5 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -47,8 +47,8 @@
/* ----- global variables --------------------------------------------- */
static int bit_test; /* see if the line-setting functions work */
-module_param(bit_test, bool, 0);
-MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
+module_param(bit_test, int, S_IRUGO);
+MODULE_PARM_DESC(bit_test, "lines testing - 0 off; 1 report; 2 fail if stuck");
#ifdef DEBUG
static int i2c_debug = 1;
@@ -250,7 +250,9 @@
sda = getsda(adap);
scl = (adap->getscl == NULL) ? 1 : getscl(adap);
if (!scl || !sda) {
- printk(KERN_WARNING "%s: bus seems to be busy\n", name);
+ printk(KERN_WARNING
+ "%s: bus seems to be busy (scl=%d, sda=%d)\n",
+ name, scl, sda);
goto bailout;
}
@@ -441,7 +443,7 @@
acknak(i2c_adap, 0);
dev_err(&i2c_adap->dev, "readbytes: invalid "
"block length (%d)\n", inval);
- return -EREMOTEIO;
+ return -EPROTO;
}
/* The original count value accounts for the extra
bytes, that is, either 1 for a regular transaction,
@@ -470,7 +472,7 @@
* reads, writes as well as 10bit-addresses.
* returns:
* 0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set
- * -x an error occurred (like: -EREMOTEIO if the device did not answer, or
+ * -x an error occurred (like: -ENXIO if the device did not answer, or
* -ETIMEDOUT, for example if the lines are stuck...)
*/
static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
@@ -493,14 +495,14 @@
if ((ret != 1) && !nak_ok) {
dev_err(&i2c_adap->dev,
"died at extended address code\n");
- return -EREMOTEIO;
+ return -ENXIO;
}
/* the remaining 8 bit address */
ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
if ((ret != 1) && !nak_ok) {
/* the chip did not ack / xmission error occurred */
dev_err(&i2c_adap->dev, "died at 2nd address code\n");
- return -EREMOTEIO;
+ return -ENXIO;
}
if (flags & I2C_M_RD) {
bit_dbg(3, &i2c_adap->dev, "emitting repeated "
@@ -512,7 +514,7 @@
if ((ret != 1) && !nak_ok) {
dev_err(&i2c_adap->dev,
"died at repeated address code\n");
- return -EREMOTEIO;
+ return -EIO;
}
}
} else { /* normal 7bit address */
@@ -570,7 +572,7 @@
ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
- ret = -EREMOTEIO;
+ ret = -EIO;
goto bailout;
}
} else {
@@ -581,7 +583,7 @@
ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
- ret = -EREMOTEIO;
+ ret = -EIO;
goto bailout;
}
}
@@ -624,7 +626,7 @@
if (bit_test) {
ret = test_bus(adap);
- if (ret < 0)
+ if (bit_test >= 2 && ret < 0)
return -ENODEV;
}
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 4ca9cf9..beb9ffe 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -196,7 +196,7 @@
} else {
dev_dbg(&i2c_adap->dev, "bus is not idle. status is "
"%#04x\n", state);
- return -EAGAIN;
+ return -EBUSY;
}
}
@@ -224,7 +224,7 @@
}
curmsg = 0;
- ret = -EREMOTEIO;
+ ret = -EIO;
while (curmsg < num) {
state = pca_status(adap);
@@ -259,6 +259,7 @@
case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after SLA+W\n");
pca_stop(adap);
+ ret = -ENXIO;
goto out;
case 0x40: /* SLA+R has been transmitted; ACK has been received */
@@ -283,6 +284,7 @@
case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after SLA+R\n");
pca_stop(adap);
+ ret = -ENXIO;
goto out;
case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 646068e..76f6531 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -110,7 +110,6 @@
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
depends on PCI
- select MFD_CORE
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
@@ -350,15 +349,25 @@
devices such as DaVinci NIC.
For details please see http://www.ti.com/davinci
-config I2C_DESIGNWARE
- tristate "Synopsys DesignWare"
+config I2C_DESIGNWARE_PLATFORM
+ tristate "Synopsys DesignWare Platfrom"
depends on HAVE_CLK
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
This driver can also be built as a module. If so, the module
- will be called i2c-designware.
+ will be called i2c-designware-platform.
+
+config I2C_DESIGNWARE_PCI
+ tristate "Synopsys DesignWare PCI"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the
+ Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-designware-pci.
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
@@ -789,7 +798,7 @@
config I2C_ELEKTOR
tristate "Elektor ISA card"
- depends on ISA && BROKEN_ON_SMP
+ depends on ISA && HAS_IOPORT && BROKEN_ON_SMP
select I2C_ALGOPCF
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e6cf294..fba6da6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,7 +33,10 @@
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
-obj-$(CONFIG_I2C_DESIGNWARE) += i2c-designware.o
+obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 532828b..4f757a2 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -39,29 +39,41 @@
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
+#define PSC_SEL 0x00
+#define PSC_CTRL 0x04
+#define PSC_SMBCFG 0x08
+#define PSC_SMBMSK 0x0C
+#define PSC_SMBPCR 0x10
+#define PSC_SMBSTAT 0x14
+#define PSC_SMBEVNT 0x18
+#define PSC_SMBTXRX 0x1C
+#define PSC_SMBTMR 0x20
+
struct i2c_au1550_data {
- u32 psc_base;
+ void __iomem *psc_base;
int xfer_timeout;
- int ack_timeout;
struct i2c_adapter adap;
struct resource *ioarea;
};
-static int
-wait_xfer_done(struct i2c_au1550_data *adap)
+static inline void WR(struct i2c_au1550_data *a, int r, unsigned long v)
{
- u32 stat;
- int i;
- volatile psc_smb_t *sp;
+ __raw_writel(v, a->psc_base + r);
+ wmb();
+}
- sp = (volatile psc_smb_t *)(adap->psc_base);
+static inline unsigned long RD(struct i2c_au1550_data *a, int r)
+{
+ return __raw_readl(a->psc_base + r);
+}
- /* Wait for Tx Buffer Empty
- */
+static int wait_xfer_done(struct i2c_au1550_data *adap)
+{
+ int i;
+
+ /* Wait for Tx Buffer Empty */
for (i = 0; i < adap->xfer_timeout; i++) {
- stat = sp->psc_smbstat;
- au_sync();
- if ((stat & PSC_SMBSTAT_TE) != 0)
+ if (RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_TE)
return 0;
udelay(1);
@@ -70,41 +82,27 @@
return -ETIMEDOUT;
}
-static int
-wait_ack(struct i2c_au1550_data *adap)
+static int wait_ack(struct i2c_au1550_data *adap)
{
- u32 stat;
- volatile psc_smb_t *sp;
+ unsigned long stat;
if (wait_xfer_done(adap))
return -ETIMEDOUT;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
- stat = sp->psc_smbevnt;
- au_sync();
-
+ stat = RD(adap, PSC_SMBEVNT);
if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
return -ETIMEDOUT;
return 0;
}
-static int
-wait_master_done(struct i2c_au1550_data *adap)
+static int wait_master_done(struct i2c_au1550_data *adap)
{
- u32 stat;
- int i;
- volatile psc_smb_t *sp;
+ int i;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
- /* Wait for Master Done.
- */
- for (i = 0; i < adap->xfer_timeout; i++) {
- stat = sp->psc_smbevnt;
- au_sync();
- if ((stat & PSC_SMBEVNT_MD) != 0)
+ /* Wait for Master Done. */
+ for (i = 0; i < 2 * adap->xfer_timeout; i++) {
+ if ((RD(adap, PSC_SMBEVNT) & PSC_SMBEVNT_MD) != 0)
return 0;
udelay(1);
}
@@ -115,29 +113,20 @@
static int
do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
{
- volatile psc_smb_t *sp;
- u32 stat;
+ unsigned long stat;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
- /* Reset the FIFOs, clear events.
- */
- stat = sp->psc_smbstat;
- sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
- au_sync();
+ /* Reset the FIFOs, clear events. */
+ stat = RD(adap, PSC_SMBSTAT);
+ WR(adap, PSC_SMBEVNT, PSC_SMBEVNT_ALLCLR);
if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
- sp->psc_smbpcr = PSC_SMBPCR_DC;
- au_sync();
- do {
- stat = sp->psc_smbpcr;
- au_sync();
- } while ((stat & PSC_SMBPCR_DC) != 0);
+ WR(adap, PSC_SMBPCR, PSC_SMBPCR_DC);
+ while ((RD(adap, PSC_SMBPCR) & PSC_SMBPCR_DC) != 0)
+ cpu_relax();
udelay(50);
}
- /* Write out the i2c chip address and specify operation
- */
+ /* Write out the i2c chip address and specify operation */
addr <<= 1;
if (rd)
addr |= 1;
@@ -146,56 +135,42 @@
if (q)
addr |= PSC_SMBTXRX_STP;
- /* Put byte into fifo, start up master.
- */
- sp->psc_smbtxrx = addr;
- au_sync();
- sp->psc_smbpcr = PSC_SMBPCR_MS;
- au_sync();
+ /* Put byte into fifo, start up master. */
+ WR(adap, PSC_SMBTXRX, addr);
+ WR(adap, PSC_SMBPCR, PSC_SMBPCR_MS);
if (wait_ack(adap))
return -EIO;
return (q) ? wait_master_done(adap) : 0;
}
-static u32
-wait_for_rx_byte(struct i2c_au1550_data *adap, u32 *ret_data)
+static int wait_for_rx_byte(struct i2c_au1550_data *adap, unsigned char *out)
{
- int j;
- u32 data, stat;
- volatile psc_smb_t *sp;
+ int j;
if (wait_xfer_done(adap))
return -EIO;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
j = adap->xfer_timeout * 100;
do {
j--;
if (j <= 0)
return -EIO;
- stat = sp->psc_smbstat;
- au_sync();
- if ((stat & PSC_SMBSTAT_RE) == 0)
+ if ((RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_RE) == 0)
j = 0;
else
udelay(1);
} while (j > 0);
- data = sp->psc_smbtxrx;
- au_sync();
- *ret_data = data;
+
+ *out = RD(adap, PSC_SMBTXRX);
return 0;
}
-static int
-i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
+static int i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
unsigned int len)
{
- int i;
- u32 data;
- volatile psc_smb_t *sp;
+ int i;
if (len == 0)
return 0;
@@ -204,62 +179,46 @@
* zero bytes for timing, waiting for bytes to appear in the
* receive fifo, then reading the bytes.
*/
-
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
i = 0;
- while (i < (len-1)) {
- sp->psc_smbtxrx = 0;
- au_sync();
- if (wait_for_rx_byte(adap, &data))
+ while (i < (len - 1)) {
+ WR(adap, PSC_SMBTXRX, 0);
+ if (wait_for_rx_byte(adap, &buf[i]))
return -EIO;
- buf[i] = data;
i++;
}
- /* The last byte has to indicate transfer done.
- */
- sp->psc_smbtxrx = PSC_SMBTXRX_STP;
- au_sync();
+ /* The last byte has to indicate transfer done. */
+ WR(adap, PSC_SMBTXRX, PSC_SMBTXRX_STP);
if (wait_master_done(adap))
return -EIO;
- data = sp->psc_smbtxrx;
- au_sync();
- buf[i] = data;
+ buf[i] = (unsigned char)(RD(adap, PSC_SMBTXRX) & 0xff);
return 0;
}
-static int
-i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
+static int i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
unsigned int len)
{
- int i;
- u32 data;
- volatile psc_smb_t *sp;
+ int i;
+ unsigned long data;
if (len == 0)
return 0;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
i = 0;
while (i < (len-1)) {
data = buf[i];
- sp->psc_smbtxrx = data;
- au_sync();
+ WR(adap, PSC_SMBTXRX, data);
if (wait_ack(adap))
return -EIO;
i++;
}
- /* The last byte has to indicate transfer done.
- */
+ /* The last byte has to indicate transfer done. */
data = buf[i];
data |= PSC_SMBTXRX_STP;
- sp->psc_smbtxrx = data;
- au_sync();
+ WR(adap, PSC_SMBTXRX, data);
if (wait_master_done(adap))
return -EIO;
return 0;
@@ -269,12 +228,10 @@
au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
{
struct i2c_au1550_data *adap = i2c_adap->algo_data;
- volatile psc_smb_t *sp = (volatile psc_smb_t *)adap->psc_base;
struct i2c_msg *p;
int i, err = 0;
- sp->psc_ctrl = PSC_CTRL_ENABLE;
- au_sync();
+ WR(adap, PSC_CTRL, PSC_CTRL_ENABLE);
for (i = 0; !err && i < num; i++) {
p = &msgs[i];
@@ -293,14 +250,12 @@
if (err == 0)
err = num;
- sp->psc_ctrl = PSC_CTRL_SUSPEND;
- au_sync();
+ WR(adap, PSC_CTRL, PSC_CTRL_SUSPEND);
return err;
}
-static u32
-au1550_func(struct i2c_adapter *adap)
+static u32 au1550_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
@@ -312,57 +267,45 @@
static void i2c_au1550_setup(struct i2c_au1550_data *priv)
{
- volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
- u32 stat;
+ unsigned long cfg;
- sp->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
- sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
- sp->psc_smbcfg = 0;
- au_sync();
- sp->psc_ctrl = PSC_CTRL_ENABLE;
- au_sync();
- do {
- stat = sp->psc_smbstat;
- au_sync();
- } while ((stat & PSC_SMBSTAT_SR) == 0);
+ WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
+ WR(priv, PSC_SEL, PSC_SEL_PS_SMBUSMODE);
+ WR(priv, PSC_SMBCFG, 0);
+ WR(priv, PSC_CTRL, PSC_CTRL_ENABLE);
+ while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+ cpu_relax();
- sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
- PSC_SMBCFG_DD_DISABLE);
+ cfg = PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | PSC_SMBCFG_DD_DISABLE;
+ WR(priv, PSC_SMBCFG, cfg);
/* Divide by 8 to get a 6.25 MHz clock. The later protocol
* timings are based on this clock.
*/
- sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
- sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
- au_sync();
+ cfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
+ WR(priv, PSC_SMBCFG, cfg);
+ WR(priv, PSC_SMBMSK, PSC_SMBMSK_ALLMASK);
/* Set the protocol timer values. See Table 71 in the
* Au1550 Data Book for standard timing values.
*/
- sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
+ WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
- PSC_SMBTMR_SET_CH(15);
- au_sync();
+ PSC_SMBTMR_SET_CH(15));
- sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
- do {
- stat = sp->psc_smbstat;
- au_sync();
- } while ((stat & PSC_SMBSTAT_SR) == 0);
+ cfg |= PSC_SMBCFG_DE_ENABLE;
+ WR(priv, PSC_SMBCFG, cfg);
+ while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+ cpu_relax();
- sp->psc_ctrl = PSC_CTRL_SUSPEND;
- au_sync();
+ WR(priv, PSC_CTRL, PSC_CTRL_SUSPEND);
}
static void i2c_au1550_disable(struct i2c_au1550_data *priv)
{
- volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
-
- sp->psc_smbcfg = 0;
- sp->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
+ WR(priv, PSC_SMBCFG, 0);
+ WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
}
/*
@@ -396,9 +339,12 @@
goto out_mem;
}
- priv->psc_base = CKSEG1ADDR(r->start);
+ priv->psc_base = ioremap(r->start, resource_size(r));
+ if (!priv->psc_base) {
+ ret = -EIO;
+ goto out_map;
+ }
priv->xfer_timeout = 200;
- priv->ack_timeout = 200;
priv->adap.nr = pdev->id;
priv->adap.algo = &au1550_algo;
@@ -406,8 +352,7 @@
priv->adap.dev.parent = &pdev->dev;
strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
- /* Now, set up the PSC for SMBus PIO mode.
- */
+ /* Now, set up the PSC for SMBus PIO mode. */
i2c_au1550_setup(priv);
ret = i2c_add_numbered_adapter(&priv->adap);
@@ -417,7 +362,8 @@
}
i2c_au1550_disable(priv);
-
+ iounmap(priv->psc_base);
+out_map:
release_resource(priv->ioarea);
kfree(priv->ioarea);
out_mem:
@@ -426,14 +372,14 @@
return ret;
}
-static int __devexit
-i2c_au1550_remove(struct platform_device *pdev)
+static int __devexit i2c_au1550_remove(struct platform_device *pdev)
{
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
i2c_del_adapter(&priv->adap);
i2c_au1550_disable(priv);
+ iounmap(priv->psc_base);
release_resource(priv->ioarea);
kfree(priv->ioarea);
kfree(priv);
@@ -441,49 +387,51 @@
}
#ifdef CONFIG_PM
-static int
-i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
+static int i2c_au1550_suspend(struct device *dev)
{
- struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ struct i2c_au1550_data *priv = dev_get_drvdata(dev);
i2c_au1550_disable(priv);
return 0;
}
-static int
-i2c_au1550_resume(struct platform_device *pdev)
+static int i2c_au1550_resume(struct device *dev)
{
- struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ struct i2c_au1550_data *priv = dev_get_drvdata(dev);
i2c_au1550_setup(priv);
return 0;
}
+
+static const struct dev_pm_ops i2c_au1550_pmops = {
+ .suspend = i2c_au1550_suspend,
+ .resume = i2c_au1550_resume,
+};
+
+#define AU1XPSC_SMBUS_PMOPS (&i2c_au1550_pmops)
+
#else
-#define i2c_au1550_suspend NULL
-#define i2c_au1550_resume NULL
+#define AU1XPSC_SMBUS_PMOPS NULL
#endif
static struct platform_driver au1xpsc_smbus_driver = {
.driver = {
.name = "au1xpsc_smbus",
.owner = THIS_MODULE,
+ .pm = AU1XPSC_SMBUS_PMOPS,
},
.probe = i2c_au1550_probe,
.remove = __devexit_p(i2c_au1550_remove),
- .suspend = i2c_au1550_suspend,
- .resume = i2c_au1550_resume,
};
-static int __init
-i2c_au1550_init(void)
+static int __init i2c_au1550_init(void)
{
return platform_driver_register(&au1xpsc_smbus_driver);
}
-static void __exit
-i2c_au1550_exit(void)
+static void __exit i2c_au1550_exit(void)
{
platform_driver_unregister(&au1xpsc_smbus_driver);
}
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index cbc98ae..cdb59e5 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -631,7 +631,7 @@
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
- IRQF_DISABLED, pdev->name, iface);
+ 0, pdev->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
return -ENODEV;
@@ -702,7 +702,7 @@
}
rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
- IRQF_DISABLED, pdev->name, iface);
+ 0, pdev->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
rc = -ENODEV;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
new file mode 100644
index 0000000..df87992
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -0,0 +1,705 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include "i2c-designware-core.h"
+
+/*
+ * Registers offset
+ */
+#define DW_IC_CON 0x0
+#define DW_IC_TAR 0x4
+#define DW_IC_DATA_CMD 0x10
+#define DW_IC_SS_SCL_HCNT 0x14
+#define DW_IC_SS_SCL_LCNT 0x18
+#define DW_IC_FS_SCL_HCNT 0x1c
+#define DW_IC_FS_SCL_LCNT 0x20
+#define DW_IC_INTR_STAT 0x2c
+#define DW_IC_INTR_MASK 0x30
+#define DW_IC_RAW_INTR_STAT 0x34
+#define DW_IC_RX_TL 0x38
+#define DW_IC_TX_TL 0x3c
+#define DW_IC_CLR_INTR 0x40
+#define DW_IC_CLR_RX_UNDER 0x44
+#define DW_IC_CLR_RX_OVER 0x48
+#define DW_IC_CLR_TX_OVER 0x4c
+#define DW_IC_CLR_RD_REQ 0x50
+#define DW_IC_CLR_TX_ABRT 0x54
+#define DW_IC_CLR_RX_DONE 0x58
+#define DW_IC_CLR_ACTIVITY 0x5c
+#define DW_IC_CLR_STOP_DET 0x60
+#define DW_IC_CLR_START_DET 0x64
+#define DW_IC_CLR_GEN_CALL 0x68
+#define DW_IC_ENABLE 0x6c
+#define DW_IC_STATUS 0x70
+#define DW_IC_TXFLR 0x74
+#define DW_IC_RXFLR 0x78
+#define DW_IC_TX_ABRT_SOURCE 0x80
+#define DW_IC_COMP_PARAM_1 0xf4
+#define DW_IC_COMP_TYPE 0xfc
+#define DW_IC_COMP_TYPE_VALUE 0x44570140
+
+#define DW_IC_INTR_RX_UNDER 0x001
+#define DW_IC_INTR_RX_OVER 0x002
+#define DW_IC_INTR_RX_FULL 0x004
+#define DW_IC_INTR_TX_OVER 0x008
+#define DW_IC_INTR_TX_EMPTY 0x010
+#define DW_IC_INTR_RD_REQ 0x020
+#define DW_IC_INTR_TX_ABRT 0x040
+#define DW_IC_INTR_RX_DONE 0x080
+#define DW_IC_INTR_ACTIVITY 0x100
+#define DW_IC_INTR_STOP_DET 0x200
+#define DW_IC_INTR_START_DET 0x400
+#define DW_IC_INTR_GEN_CALL 0x800
+
+#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
+ DW_IC_INTR_TX_EMPTY | \
+ DW_IC_INTR_TX_ABRT | \
+ DW_IC_INTR_STOP_DET)
+
+#define DW_IC_STATUS_ACTIVITY 0x1
+
+#define DW_IC_ERR_TX_ABRT 0x1
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE 0x0
+#define STATUS_WRITE_IN_PROGRESS 0x1
+#define STATUS_READ_IN_PROGRESS 0x2
+
+#define TIMEOUT 20 /* ms */
+
+/*
+ * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK 0
+#define ABRT_10ADDR1_NOACK 1
+#define ABRT_10ADDR2_NOACK 2
+#define ABRT_TXDATA_NOACK 3
+#define ABRT_GCALL_NOACK 4
+#define ABRT_GCALL_READ 5
+#define ABRT_SBYTE_ACKDET 7
+#define ABRT_SBYTE_NORSTRT 9
+#define ABRT_10B_RD_NORSTRT 10
+#define ABRT_MASTER_DIS 11
+#define ARB_LOST 12
+
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
+
+#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+ DW_IC_TX_ABRT_10ADDR1_NOACK | \
+ DW_IC_TX_ABRT_10ADDR2_NOACK | \
+ DW_IC_TX_ABRT_TXDATA_NOACK | \
+ DW_IC_TX_ABRT_GCALL_NOACK)
+
+static char *abort_sources[] = {
+ [ABRT_7B_ADDR_NOACK] =
+ "slave address not acknowledged (7bit mode)",
+ [ABRT_10ADDR1_NOACK] =
+ "first address byte not acknowledged (10bit mode)",
+ [ABRT_10ADDR2_NOACK] =
+ "second address byte not acknowledged (10bit mode)",
+ [ABRT_TXDATA_NOACK] =
+ "data not acknowledged",
+ [ABRT_GCALL_NOACK] =
+ "no acknowledgement for a general call",
+ [ABRT_GCALL_READ] =
+ "read after general call",
+ [ABRT_SBYTE_ACKDET] =
+ "start byte acknowledged",
+ [ABRT_SBYTE_NORSTRT] =
+ "trying to send start byte when restart is disabled",
+ [ABRT_10B_RD_NORSTRT] =
+ "trying to read when restart is disabled (10bit mode)",
+ [ABRT_MASTER_DIS] =
+ "trying to use disabled adapter",
+ [ARB_LOST] =
+ "lost arbitration",
+};
+
+u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+ u32 value = readl(dev->base + offset);
+
+ if (dev->swab)
+ return swab32(value);
+ else
+ return value;
+}
+
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+ if (dev->swab)
+ b = swab32(b);
+
+ writel(b, dev->base + offset);
+}
+
+static u32
+i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
+{
+ /*
+ * DesignWare I2C core doesn't seem to have solid strategy to meet
+ * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
+ * will result in violation of the tHD;STA spec.
+ */
+ if (cond)
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
+ *
+ * This is based on the DW manuals, and represents an ideal
+ * configuration. The resulting I2C bus speed will be
+ * faster than any of the others.
+ *
+ * If your hardware is free from tHD;STA issue, try this one.
+ */
+ return (ic_clk * tSYMBOL + 5000) / 10000 - 8 + offset;
+ else
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
+ *
+ * This is just experimental rule; the tHD;STA period turned
+ * out to be proportinal to (_HCNT + 3). With this setting,
+ * we could meet both tHIGH and tHD;STA timing specs.
+ *
+ * If unsure, you'd better to take this alternative.
+ *
+ * The reason why we need to take into account "tf" here,
+ * is the same as described in i2c_dw_scl_lcnt().
+ */
+ return (ic_clk * (tSYMBOL + tf) + 5000) / 10000 - 3 + offset;
+}
+
+static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
+{
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
+ *
+ * DW I2C core starts counting the SCL CNTs for the LOW period
+ * of the SCL clock (tLOW) as soon as it pulls the SCL line.
+ * In order to meet the tLOW timing spec, we need to take into
+ * account the fall time of SCL signal (tf). Default tf value
+ * should be 0.3 us, for safety.
+ */
+ return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
+}
+
+/**
+ * i2c_dw_init() - initialize the designware i2c master hardware
+ * @dev: device private data
+ *
+ * This functions configures and enables the I2C master.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+int i2c_dw_init(struct dw_i2c_dev *dev)
+{
+ u32 input_clock_khz;
+ u32 hcnt, lcnt;
+ u32 reg;
+
+ input_clock_khz = dev->get_clk_rate_khz(dev);
+
+ /* Configure register endianess access */
+ reg = dw_readl(dev, DW_IC_COMP_TYPE);
+ if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+ dev->swab = 1;
+ reg = DW_IC_COMP_TYPE_VALUE;
+ }
+
+ if (reg != DW_IC_COMP_TYPE_VALUE) {
+ dev_err(dev->dev, "Unknown Synopsys component type: "
+ "0x%08x\n", reg);
+ return -ENODEV;
+ }
+
+ /* Disable the adapter */
+ dw_writel(dev, 0, DW_IC_ENABLE);
+
+ /* set standard and fast speed deviders for high/low periods */
+
+ /* Standard-mode */
+ hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+ 40, /* tHD;STA = tHIGH = 4.0 us */
+ 3, /* tf = 0.3 us */
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+ 47, /* tLOW = 4.7 us */
+ 3, /* tf = 0.3 us */
+ 0); /* No offset */
+ dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
+ dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ /* Fast-mode */
+ hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+ 6, /* tHD;STA = tHIGH = 0.6 us */
+ 3, /* tf = 0.3 us */
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+ 13, /* tLOW = 1.3 us */
+ 3, /* tf = 0.3 us */
+ 0); /* No offset */
+ dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
+ dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ /* Configure Tx/Rx FIFO threshold levels */
+ dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+ dw_writel(dev, 0, DW_IC_RX_TL);
+
+ /* configure the i2c master */
+ dw_writel(dev, dev->master_cfg , DW_IC_CON);
+ return 0;
+}
+
+/*
+ * Waiting for bus not busy
+ */
+static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
+{
+ int timeout = TIMEOUT;
+
+ while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+ if (timeout <= 0) {
+ dev_warn(dev->dev, "timeout waiting for bus ready\n");
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ u32 ic_con;
+
+ /* Disable the adapter */
+ dw_writel(dev, 0, DW_IC_ENABLE);
+
+ /* set the slave (target) address */
+ dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
+
+ /* if the slave address is ten bit address, enable 10BITADDR */
+ ic_con = dw_readl(dev, DW_IC_CON);
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+ ic_con |= DW_IC_CON_10BITADDR_MASTER;
+ else
+ ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+ dw_writel(dev, ic_con, DW_IC_CON);
+
+ /* Enable the adapter */
+ dw_writel(dev, 1, DW_IC_ENABLE);
+
+ /* Enable interrupts */
+ dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
+}
+
+/*
+ * Initiate (and continue) low level master read/write transaction.
+ * This function is only called from i2c_dw_isr, and pumping i2c_msg
+ * messages into the tx buffer. Even if the size of i2c_msg data is
+ * longer than the size of the tx buffer, it handles everything.
+ */
+void
+i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ u32 intr_mask;
+ int tx_limit, rx_limit;
+ u32 addr = msgs[dev->msg_write_idx].addr;
+ u32 buf_len = dev->tx_buf_len;
+ u8 *buf = dev->tx_buf;
+
+ intr_mask = DW_IC_INTR_DEFAULT_MASK;
+
+ for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
+ /*
+ * if target address has changed, we need to
+ * reprogram the target address in the i2c
+ * adapter when we are done with this transfer
+ */
+ if (msgs[dev->msg_write_idx].addr != addr) {
+ dev_err(dev->dev,
+ "%s: invalid target address\n", __func__);
+ dev->msg_err = -EINVAL;
+ break;
+ }
+
+ if (msgs[dev->msg_write_idx].len == 0) {
+ dev_err(dev->dev,
+ "%s: invalid message length\n", __func__);
+ dev->msg_err = -EINVAL;
+ break;
+ }
+
+ if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+ /* new i2c_msg */
+ buf = msgs[dev->msg_write_idx].buf;
+ buf_len = msgs[dev->msg_write_idx].len;
+ }
+
+ tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
+ rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
+
+ while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
+ if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
+ dw_writel(dev, 0x100, DW_IC_DATA_CMD);
+ rx_limit--;
+ } else
+ dw_writel(dev, *buf++, DW_IC_DATA_CMD);
+ tx_limit--; buf_len--;
+ }
+
+ dev->tx_buf = buf;
+ dev->tx_buf_len = buf_len;
+
+ if (buf_len > 0) {
+ /* more bytes to be written */
+ dev->status |= STATUS_WRITE_IN_PROGRESS;
+ break;
+ } else
+ dev->status &= ~STATUS_WRITE_IN_PROGRESS;
+ }
+
+ /*
+ * If i2c_msg index search is completed, we don't need TX_EMPTY
+ * interrupt any more.
+ */
+ if (dev->msg_write_idx == dev->msgs_num)
+ intr_mask &= ~DW_IC_INTR_TX_EMPTY;
+
+ if (dev->msg_err)
+ intr_mask = 0;
+
+ dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
+}
+
+static void
+i2c_dw_read(struct dw_i2c_dev *dev)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ int rx_valid;
+
+ for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
+ u32 len;
+ u8 *buf;
+
+ if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
+ continue;
+
+ if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
+ len = msgs[dev->msg_read_idx].len;
+ buf = msgs[dev->msg_read_idx].buf;
+ } else {
+ len = dev->rx_buf_len;
+ buf = dev->rx_buf;
+ }
+
+ rx_valid = dw_readl(dev, DW_IC_RXFLR);
+
+ for (; len > 0 && rx_valid > 0; len--, rx_valid--)
+ *buf++ = dw_readl(dev, DW_IC_DATA_CMD);
+
+ if (len > 0) {
+ dev->status |= STATUS_READ_IN_PROGRESS;
+ dev->rx_buf_len = len;
+ dev->rx_buf = buf;
+ return;
+ } else
+ dev->status &= ~STATUS_READ_IN_PROGRESS;
+ }
+}
+
+static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
+{
+ unsigned long abort_source = dev->abort_source;
+ int i;
+
+ if (abort_source & DW_IC_TX_ABRT_NOACK) {
+ for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+ dev_dbg(dev->dev,
+ "%s: %s\n", __func__, abort_sources[i]);
+ return -EREMOTEIO;
+ }
+
+ for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+ dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+
+ if (abort_source & DW_IC_TX_ARB_LOST)
+ return -EAGAIN;
+ else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+ return -EINVAL; /* wrong msgs[] data */
+ else
+ return -EIO;
+}
+
+/*
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ */
+int
+i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ int ret;
+
+ dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
+
+ mutex_lock(&dev->lock);
+ pm_runtime_get_sync(dev->dev);
+
+ INIT_COMPLETION(dev->cmd_complete);
+ dev->msgs = msgs;
+ dev->msgs_num = num;
+ dev->cmd_err = 0;
+ dev->msg_write_idx = 0;
+ dev->msg_read_idx = 0;
+ dev->msg_err = 0;
+ dev->status = STATUS_IDLE;
+ dev->abort_source = 0;
+
+ ret = i2c_dw_wait_bus_not_busy(dev);
+ if (ret < 0)
+ goto done;
+
+ /* start the transfers */
+ i2c_dw_xfer_init(dev);
+
+ /* wait for tx to complete */
+ ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
+ if (ret == 0) {
+ dev_err(dev->dev, "controller timed out\n");
+ i2c_dw_init(dev);
+ ret = -ETIMEDOUT;
+ goto done;
+ } else if (ret < 0)
+ goto done;
+
+ if (dev->msg_err) {
+ ret = dev->msg_err;
+ goto done;
+ }
+
+ /* no error */
+ if (likely(!dev->cmd_err)) {
+ /* Disable the adapter */
+ dw_writel(dev, 0, DW_IC_ENABLE);
+ ret = num;
+ goto done;
+ }
+
+ /* We have an error */
+ if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
+ ret = i2c_dw_handle_tx_abort(dev);
+ goto done;
+ }
+ ret = -EIO;
+
+done:
+ pm_runtime_put(dev->dev);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+u32 i2c_dw_func(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ return dev->functionality;
+}
+
+static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
+{
+ u32 stat;
+
+ /*
+ * The IC_INTR_STAT register just indicates "enabled" interrupts.
+ * Ths unmasked raw version of interrupt status bits are available
+ * in the IC_RAW_INTR_STAT register.
+ *
+ * That is,
+ * stat = dw_readl(IC_INTR_STAT);
+ * equals to,
+ * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+ *
+ * The raw version might be useful for debugging purposes.
+ */
+ stat = dw_readl(dev, DW_IC_INTR_STAT);
+
+ /*
+ * Do not use the IC_CLR_INTR register to clear interrupts, or
+ * you'll miss some interrupts, triggered during the period from
+ * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+ *
+ * Instead, use the separately-prepared IC_CLR_* registers.
+ */
+ if (stat & DW_IC_INTR_RX_UNDER)
+ dw_readl(dev, DW_IC_CLR_RX_UNDER);
+ if (stat & DW_IC_INTR_RX_OVER)
+ dw_readl(dev, DW_IC_CLR_RX_OVER);
+ if (stat & DW_IC_INTR_TX_OVER)
+ dw_readl(dev, DW_IC_CLR_TX_OVER);
+ if (stat & DW_IC_INTR_RD_REQ)
+ dw_readl(dev, DW_IC_CLR_RD_REQ);
+ if (stat & DW_IC_INTR_TX_ABRT) {
+ /*
+ * The IC_TX_ABRT_SOURCE register is cleared whenever
+ * the IC_CLR_TX_ABRT is read. Preserve it beforehand.
+ */
+ dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
+ dw_readl(dev, DW_IC_CLR_TX_ABRT);
+ }
+ if (stat & DW_IC_INTR_RX_DONE)
+ dw_readl(dev, DW_IC_CLR_RX_DONE);
+ if (stat & DW_IC_INTR_ACTIVITY)
+ dw_readl(dev, DW_IC_CLR_ACTIVITY);
+ if (stat & DW_IC_INTR_STOP_DET)
+ dw_readl(dev, DW_IC_CLR_STOP_DET);
+ if (stat & DW_IC_INTR_START_DET)
+ dw_readl(dev, DW_IC_CLR_START_DET);
+ if (stat & DW_IC_INTR_GEN_CALL)
+ dw_readl(dev, DW_IC_CLR_GEN_CALL);
+
+ return stat;
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C interrupt
+ * occurs.
+ */
+irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+ struct dw_i2c_dev *dev = dev_id;
+ u32 stat, enabled;
+
+ enabled = dw_readl(dev, DW_IC_ENABLE);
+ stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+ dev_dbg(dev->dev, "%s: %s enabled= 0x%x stat=0x%x\n", __func__,
+ dev->adapter.name, enabled, stat);
+ if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+ return IRQ_NONE;
+
+ stat = i2c_dw_read_clear_intrbits(dev);
+
+ if (stat & DW_IC_INTR_TX_ABRT) {
+ dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+ dev->status = STATUS_IDLE;
+
+ /*
+ * Anytime TX_ABRT is set, the contents of the tx/rx
+ * buffers are flushed. Make sure to skip them.
+ */
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+ goto tx_aborted;
+ }
+
+ if (stat & DW_IC_INTR_RX_FULL)
+ i2c_dw_read(dev);
+
+ if (stat & DW_IC_INTR_TX_EMPTY)
+ i2c_dw_xfer_msg(dev);
+
+ /*
+ * No need to modify or disable the interrupt mask here.
+ * i2c_dw_xfer_msg() will take care of it according to
+ * the current transmit status.
+ */
+
+tx_aborted:
+ if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
+ complete(&dev->cmd_complete);
+
+ return IRQ_HANDLED;
+}
+
+void i2c_dw_enable(struct dw_i2c_dev *dev)
+{
+ /* Enable the adapter */
+ dw_writel(dev, 1, DW_IC_ENABLE);
+}
+
+u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
+{
+ return dw_readl(dev, DW_IC_ENABLE);
+}
+
+void i2c_dw_disable(struct dw_i2c_dev *dev)
+{
+ /* Disable controller */
+ dw_writel(dev, 0, DW_IC_ENABLE);
+
+ /* Disable all interupts */
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+ dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_clear_int(struct dw_i2c_dev *dev)
+{
+ dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+ return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
new file mode 100644
index 0000000..02d1a2d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -0,0 +1,105 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+
+#define DW_IC_CON_MASTER 0x1
+#define DW_IC_CON_SPEED_STD 0x2
+#define DW_IC_CON_SPEED_FAST 0x4
+#define DW_IC_CON_10BITADDR_MASTER 0x10
+#define DW_IC_CON_RESTART_EN 0x20
+#define DW_IC_CON_SLAVE_DISABLE 0x40
+
+
+/**
+ * struct dw_i2c_dev - private i2c-designware data
+ * @dev: driver model device node
+ * @base: IO registers pointer
+ * @cmd_complete: tx completion indicator
+ * @lock: protect this struct and IO registers
+ * @clk: input reference clock
+ * @cmd_err: run time hadware error code
+ * @msgs: points to an array of messages currently being transfered
+ * @msgs_num: the number of elements in msgs
+ * @msg_write_idx: the element index of the current tx message in the msgs
+ * array
+ * @tx_buf_len: the length of the current tx buffer
+ * @tx_buf: the current tx buffer
+ * @msg_read_idx: the element index of the current rx message in the msgs
+ * array
+ * @rx_buf_len: the length of the current rx buffer
+ * @rx_buf: the current rx buffer
+ * @msg_err: error status of the current transfer
+ * @status: i2c master status, one of STATUS_*
+ * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @irq: interrupt number for the i2c master
+ * @adapter: i2c subsystem adapter node
+ * @tx_fifo_depth: depth of the hardware tx fifo
+ * @rx_fifo_depth: depth of the hardware rx fifo
+ */
+struct dw_i2c_dev {
+ struct device *dev;
+ void __iomem *base;
+ struct completion cmd_complete;
+ struct mutex lock;
+ struct clk *clk;
+ u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
+ struct dw_pci_controller *controller;
+ int cmd_err;
+ struct i2c_msg *msgs;
+ int msgs_num;
+ int msg_write_idx;
+ u32 tx_buf_len;
+ u8 *tx_buf;
+ int msg_read_idx;
+ u32 rx_buf_len;
+ u8 *rx_buf;
+ int msg_err;
+ unsigned int status;
+ u32 abort_source;
+ int irq;
+ int swab;
+ struct i2c_adapter adapter;
+ u32 functionality;
+ u32 master_cfg;
+ unsigned int tx_fifo_depth;
+ unsigned int rx_fifo_depth;
+};
+
+extern u32 dw_readl(struct dw_i2c_dev *dev, int offset);
+extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
+extern int i2c_dw_init(struct dw_i2c_dev *dev);
+extern int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+ int num);
+extern u32 i2c_dw_func(struct i2c_adapter *adap);
+extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id);
+extern void i2c_dw_enable(struct dw_i2c_dev *dev);
+extern u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable(struct dw_i2c_dev *dev);
+extern void i2c_dw_clear_int(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
new file mode 100644
index 0000000..9e89e73
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -0,0 +1,392 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ * Copyright (C) 2011 Intel corporation.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include "i2c-designware-core.h"
+
+#define DRIVER_NAME "i2c-designware-pci"
+
+enum dw_pci_ctl_id_t {
+ moorestown_0,
+ moorestown_1,
+ moorestown_2,
+
+ medfield_0,
+ medfield_1,
+ medfield_2,
+ medfield_3,
+ medfield_4,
+ medfield_5,
+};
+
+struct dw_pci_controller {
+ u32 bus_num;
+ u32 bus_cfg;
+ u32 tx_fifo_depth;
+ u32 rx_fifo_depth;
+ u32 clk_khz;
+};
+
+#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
+ DW_IC_CON_SLAVE_DISABLE | \
+ DW_IC_CON_RESTART_EN)
+
+static struct dw_pci_controller dw_pci_controllers[] = {
+ [moorestown_0] = {
+ .bus_num = 0,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [moorestown_1] = {
+ .bus_num = 1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [moorestown_2] = {
+ .bus_num = 2,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_0] = {
+ .bus_num = 0,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_1] = {
+ .bus_num = 1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_2] = {
+ .bus_num = 2,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_3] = {
+ .bus_num = 3,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_4] = {
+ .bus_num = 4,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_5] = {
+ .bus_num = 5,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+};
+static struct i2c_algorithm i2c_dw_algo = {
+ .master_xfer = i2c_dw_xfer,
+ .functionality = i2c_dw_func,
+};
+
+static int i2c_dw_pci_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
+ int err;
+
+
+ i2c_dw_disable(i2c);
+
+ err = pci_save_state(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_save_state failed\n");
+ return err;
+ }
+
+ err = pci_set_power_state(pdev, PCI_D3hot);
+ if (err) {
+ dev_err(&pdev->dev, "pci_set_power_state failed\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int i2c_dw_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
+ int err;
+ u32 enabled;
+
+ enabled = i2c_dw_is_enabled(i2c);
+ if (enabled)
+ return 0;
+
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err) {
+ dev_err(&pdev->dev, "pci_set_power_state() failed\n");
+ return err;
+ }
+
+ pci_restore_state(pdev);
+
+ i2c_dw_init(i2c);
+ i2c_dw_enable(i2c);
+ return 0;
+}
+
+static int i2c_dw_pci_runtime_idle(struct device *dev)
+{
+ int err = pm_schedule_suspend(dev, 500);
+ dev_dbg(dev, "runtime_idle called\n");
+
+ if (err != 0)
+ return 0;
+ return -EBUSY;
+}
+
+static const struct dev_pm_ops i2c_dw_pm_ops = {
+ .resume = i2c_dw_pci_resume,
+ .suspend = i2c_dw_pci_suspend,
+ SET_RUNTIME_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume,
+ i2c_dw_pci_runtime_idle)
+};
+
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return dev->controller->clk_khz;
+}
+
+static int __devinit i2c_dw_pci_probe(struct pci_dev *pdev,
+const struct pci_device_id *id)
+{
+ struct dw_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ unsigned long start, len;
+ void __iomem *base;
+ int r;
+ struct dw_pci_controller *controller;
+
+ if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
+ printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n",
+ id->driver_data);
+ return -EINVAL;
+ }
+
+ controller = &dw_pci_controllers[id->driver_data];
+
+ r = pci_enable_device(pdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
+ r);
+ goto exit;
+ }
+
+ /* Determine the address of the I2C area */
+ start = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ if (!start || len == 0) {
+ dev_err(&pdev->dev, "base address not set\n");
+ r = -ENODEV;
+ goto exit;
+ }
+
+ r = pci_request_region(pdev, 0, DRIVER_NAME);
+ if (r) {
+ dev_err(&pdev->dev, "failed to request I2C region "
+ "0x%lx-0x%lx\n", start,
+ (unsigned long)pci_resource_end(pdev, 0));
+ goto exit;
+ }
+
+ base = ioremap_nocache(start, len);
+ if (!base) {
+ dev_err(&pdev->dev, "I/O memory remapping failed\n");
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+
+ dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+ init_completion(&dev->cmd_complete);
+ mutex_init(&dev->lock);
+ dev->clk = NULL;
+ dev->controller = controller;
+ dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+ dev->base = base;
+ dev->dev = get_device(&pdev->dev);
+ dev->functionality =
+ I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+ dev->master_cfg = controller->bus_cfg;
+
+ pci_set_drvdata(pdev, dev);
+
+ dev->tx_fifo_depth = controller->tx_fifo_depth;
+ dev->rx_fifo_depth = controller->rx_fifo_depth;
+ r = i2c_dw_init(dev);
+ if (r)
+ goto err_iounmap;
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = 0;
+ adap->algo = &i2c_dw_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->nr = controller->bus_num;
+ snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
+ adap->nr);
+
+ r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev);
+ if (r) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+ goto err_iounmap;
+ }
+
+ i2c_dw_disable_int(dev);
+ i2c_dw_clear_int(dev);
+ r = i2c_add_numbered_adapter(adap);
+ if (r) {
+ dev_err(&pdev->dev, "failure adding adapter\n");
+ goto err_free_irq;
+ }
+
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+
+ return 0;
+
+err_free_irq:
+ free_irq(pdev->irq, dev);
+err_iounmap:
+ iounmap(dev->base);
+ pci_set_drvdata(pdev, NULL);
+ put_device(&pdev->dev);
+ kfree(dev);
+err_release_region:
+ pci_release_region(pdev, 0);
+exit:
+ return r;
+}
+
+static void __devexit i2c_dw_pci_remove(struct pci_dev *pdev)
+{
+ struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
+
+ i2c_dw_disable(dev);
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
+ pci_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&dev->adapter);
+ put_device(&pdev->dev);
+
+ free_irq(dev->irq, dev);
+ kfree(dev);
+ pci_release_region(pdev, 0);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("i2c_designware-pci");
+
+DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
+ /* Moorestown */
+ { PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
+ { PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
+ { PCI_VDEVICE(INTEL, 0x0804), moorestown_2 },
+ /* Medfield */
+ { PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
+ { PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
+ { PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
+ { PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
+ { PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
+ { PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
+
+static struct pci_driver dw_i2c_driver = {
+ .name = DRIVER_NAME,
+ .id_table = i2_designware_pci_ids,
+ .probe = i2c_dw_pci_probe,
+ .remove = __devexit_p(i2c_dw_pci_remove),
+ .driver = {
+ .pm = &i2c_dw_pm_ops,
+ },
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+ return pci_register_driver(&dw_i2c_driver);
+}
+module_init(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+ pci_unregister_driver(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
new file mode 100644
index 0000000..2d3657a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -0,0 +1,215 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "i2c-designware-core.h"
+
+static struct i2c_algorithm i2c_dw_algo = {
+ .master_xfer = i2c_dw_xfer,
+ .functionality = i2c_dw_func,
+};
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return clk_get_rate(dev->clk)/1000;
+}
+
+static int __devinit dw_i2c_probe(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ struct resource *mem, *ioarea;
+ int irq, r;
+
+ /* NOTE: driver uses the static register mapping */
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return irq; /* -ENXIO */
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "I2C region already claimed\n");
+ return -EBUSY;
+ }
+
+ dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+ init_completion(&dev->cmd_complete);
+ mutex_init(&dev->lock);
+ dev->dev = get_device(&pdev->dev);
+ dev->irq = irq;
+ platform_set_drvdata(pdev, dev);
+
+ dev->clk = clk_get(&pdev->dev, NULL);
+ dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+
+ if (IS_ERR(dev->clk)) {
+ r = -ENODEV;
+ goto err_free_mem;
+ }
+ clk_enable(dev->clk);
+
+ dev->functionality =
+ I2C_FUNC_I2C |
+ I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+ dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+
+ dev->base = ioremap(mem->start, resource_size(mem));
+ if (dev->base == NULL) {
+ dev_err(&pdev->dev, "failure mapping io resources\n");
+ r = -EBUSY;
+ goto err_unuse_clocks;
+ }
+ {
+ u32 param1 = i2c_dw_read_comp_param(dev);
+
+ dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
+ dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
+ }
+ r = i2c_dw_init(dev);
+ if (r)
+ goto err_iounmap;
+
+ i2c_dw_disable_int(dev);
+ r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
+ if (r) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+ goto err_iounmap;
+ }
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_HWMON;
+ strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
+ sizeof(adap->name));
+ adap->algo = &i2c_dw_algo;
+ adap->dev.parent = &pdev->dev;
+
+ adap->nr = pdev->id;
+ r = i2c_add_numbered_adapter(adap);
+ if (r) {
+ dev_err(&pdev->dev, "failure adding adapter\n");
+ goto err_free_irq;
+ }
+
+ return 0;
+
+err_free_irq:
+ free_irq(dev->irq, dev);
+err_iounmap:
+ iounmap(dev->base);
+err_unuse_clocks:
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+err_free_mem:
+ platform_set_drvdata(pdev, NULL);
+ put_device(&pdev->dev);
+ kfree(dev);
+err_release_region:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return r;
+}
+
+static int __devexit dw_i2c_remove(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct resource *mem;
+
+ platform_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&dev->adapter);
+ put_device(&pdev->dev);
+
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+
+ i2c_dw_disable(dev);
+ free_irq(dev->irq, dev);
+ kfree(dev);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, resource_size(mem));
+ return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");
+
+static struct platform_driver dw_i2c_driver = {
+ .remove = __devexit_p(dw_i2c_remove),
+ .driver = {
+ .name = "i2c_designware",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+ return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
+}
+module_init(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+ platform_driver_unregister(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
deleted file mode 100644
index 1b42b50..0000000
--- a/drivers/i2c/busses/i2c-designware.c
+++ /dev/null
@@ -1,847 +0,0 @@
-/*
- * Synopsys DesignWare I2C adapter driver (master only).
- *
- * Based on the TI DAVINCI I2C adapter driver.
- *
- * Copyright (C) 2006 Texas Instruments.
- * Copyright (C) 2007 MontaVista Software Inc.
- * Copyright (C) 2009 Provigent Ltd.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * ----------------------------------------------------------------------------
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-/*
- * Registers offset
- */
-#define DW_IC_CON 0x0
-#define DW_IC_TAR 0x4
-#define DW_IC_DATA_CMD 0x10
-#define DW_IC_SS_SCL_HCNT 0x14
-#define DW_IC_SS_SCL_LCNT 0x18
-#define DW_IC_FS_SCL_HCNT 0x1c
-#define DW_IC_FS_SCL_LCNT 0x20
-#define DW_IC_INTR_STAT 0x2c
-#define DW_IC_INTR_MASK 0x30
-#define DW_IC_RAW_INTR_STAT 0x34
-#define DW_IC_RX_TL 0x38
-#define DW_IC_TX_TL 0x3c
-#define DW_IC_CLR_INTR 0x40
-#define DW_IC_CLR_RX_UNDER 0x44
-#define DW_IC_CLR_RX_OVER 0x48
-#define DW_IC_CLR_TX_OVER 0x4c
-#define DW_IC_CLR_RD_REQ 0x50
-#define DW_IC_CLR_TX_ABRT 0x54
-#define DW_IC_CLR_RX_DONE 0x58
-#define DW_IC_CLR_ACTIVITY 0x5c
-#define DW_IC_CLR_STOP_DET 0x60
-#define DW_IC_CLR_START_DET 0x64
-#define DW_IC_CLR_GEN_CALL 0x68
-#define DW_IC_ENABLE 0x6c
-#define DW_IC_STATUS 0x70
-#define DW_IC_TXFLR 0x74
-#define DW_IC_RXFLR 0x78
-#define DW_IC_COMP_PARAM_1 0xf4
-#define DW_IC_TX_ABRT_SOURCE 0x80
-
-#define DW_IC_CON_MASTER 0x1
-#define DW_IC_CON_SPEED_STD 0x2
-#define DW_IC_CON_SPEED_FAST 0x4
-#define DW_IC_CON_10BITADDR_MASTER 0x10
-#define DW_IC_CON_RESTART_EN 0x20
-#define DW_IC_CON_SLAVE_DISABLE 0x40
-
-#define DW_IC_INTR_RX_UNDER 0x001
-#define DW_IC_INTR_RX_OVER 0x002
-#define DW_IC_INTR_RX_FULL 0x004
-#define DW_IC_INTR_TX_OVER 0x008
-#define DW_IC_INTR_TX_EMPTY 0x010
-#define DW_IC_INTR_RD_REQ 0x020
-#define DW_IC_INTR_TX_ABRT 0x040
-#define DW_IC_INTR_RX_DONE 0x080
-#define DW_IC_INTR_ACTIVITY 0x100
-#define DW_IC_INTR_STOP_DET 0x200
-#define DW_IC_INTR_START_DET 0x400
-#define DW_IC_INTR_GEN_CALL 0x800
-
-#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
- DW_IC_INTR_TX_EMPTY | \
- DW_IC_INTR_TX_ABRT | \
- DW_IC_INTR_STOP_DET)
-
-#define DW_IC_STATUS_ACTIVITY 0x1
-
-#define DW_IC_ERR_TX_ABRT 0x1
-
-/*
- * status codes
- */
-#define STATUS_IDLE 0x0
-#define STATUS_WRITE_IN_PROGRESS 0x1
-#define STATUS_READ_IN_PROGRESS 0x2
-
-#define TIMEOUT 20 /* ms */
-
-/*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
- *
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
- */
-#define ABRT_7B_ADDR_NOACK 0
-#define ABRT_10ADDR1_NOACK 1
-#define ABRT_10ADDR2_NOACK 2
-#define ABRT_TXDATA_NOACK 3
-#define ABRT_GCALL_NOACK 4
-#define ABRT_GCALL_READ 5
-#define ABRT_SBYTE_ACKDET 7
-#define ABRT_SBYTE_NORSTRT 9
-#define ABRT_10B_RD_NORSTRT 10
-#define ABRT_MASTER_DIS 11
-#define ARB_LOST 12
-
-#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
-#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
-#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
-#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
-#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
-#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
-#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
-#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
-#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
-#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
-#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
-
-#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
- DW_IC_TX_ABRT_10ADDR1_NOACK | \
- DW_IC_TX_ABRT_10ADDR2_NOACK | \
- DW_IC_TX_ABRT_TXDATA_NOACK | \
- DW_IC_TX_ABRT_GCALL_NOACK)
-
-static char *abort_sources[] = {
- [ABRT_7B_ADDR_NOACK] =
- "slave address not acknowledged (7bit mode)",
- [ABRT_10ADDR1_NOACK] =
- "first address byte not acknowledged (10bit mode)",
- [ABRT_10ADDR2_NOACK] =
- "second address byte not acknowledged (10bit mode)",
- [ABRT_TXDATA_NOACK] =
- "data not acknowledged",
- [ABRT_GCALL_NOACK] =
- "no acknowledgement for a general call",
- [ABRT_GCALL_READ] =
- "read after general call",
- [ABRT_SBYTE_ACKDET] =
- "start byte acknowledged",
- [ABRT_SBYTE_NORSTRT] =
- "trying to send start byte when restart is disabled",
- [ABRT_10B_RD_NORSTRT] =
- "trying to read when restart is disabled (10bit mode)",
- [ABRT_MASTER_DIS] =
- "trying to use disabled adapter",
- [ARB_LOST] =
- "lost arbitration",
-};
-
-/**
- * struct dw_i2c_dev - private i2c-designware data
- * @dev: driver model device node
- * @base: IO registers pointer
- * @cmd_complete: tx completion indicator
- * @lock: protect this struct and IO registers
- * @clk: input reference clock
- * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transferred
- * @msgs_num: the number of elements in msgs
- * @msg_write_idx: the element index of the current tx message in the msgs
- * array
- * @tx_buf_len: the length of the current tx buffer
- * @tx_buf: the current tx buffer
- * @msg_read_idx: the element index of the current rx message in the msgs
- * array
- * @rx_buf_len: the length of the current rx buffer
- * @rx_buf: the current rx buffer
- * @msg_err: error status of the current transfer
- * @status: i2c master status, one of STATUS_*
- * @abort_source: copy of the TX_ABRT_SOURCE register
- * @irq: interrupt number for the i2c master
- * @adapter: i2c subsystem adapter node
- * @tx_fifo_depth: depth of the hardware tx fifo
- * @rx_fifo_depth: depth of the hardware rx fifo
- */
-struct dw_i2c_dev {
- struct device *dev;
- void __iomem *base;
- struct completion cmd_complete;
- struct mutex lock;
- struct clk *clk;
- int cmd_err;
- struct i2c_msg *msgs;
- int msgs_num;
- int msg_write_idx;
- u32 tx_buf_len;
- u8 *tx_buf;
- int msg_read_idx;
- u32 rx_buf_len;
- u8 *rx_buf;
- int msg_err;
- unsigned int status;
- u32 abort_source;
- int irq;
- struct i2c_adapter adapter;
- unsigned int tx_fifo_depth;
- unsigned int rx_fifo_depth;
-};
-
-static u32
-i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
-{
- /*
- * DesignWare I2C core doesn't seem to have solid strategy to meet
- * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
- * will result in violation of the tHD;STA spec.
- */
- if (cond)
- /*
- * Conditional expression:
- *
- * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
- *
- * This is based on the DW manuals, and represents an ideal
- * configuration. The resulting I2C bus speed will be
- * faster than any of the others.
- *
- * If your hardware is free from tHD;STA issue, try this one.
- */
- return (ic_clk * tSYMBOL + 5000) / 10000 - 8 + offset;
- else
- /*
- * Conditional expression:
- *
- * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
- *
- * This is just experimental rule; the tHD;STA period turned
- * out to be proportinal to (_HCNT + 3). With this setting,
- * we could meet both tHIGH and tHD;STA timing specs.
- *
- * If unsure, you'd better to take this alternative.
- *
- * The reason why we need to take into account "tf" here,
- * is the same as described in i2c_dw_scl_lcnt().
- */
- return (ic_clk * (tSYMBOL + tf) + 5000) / 10000 - 3 + offset;
-}
-
-static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
-{
- /*
- * Conditional expression:
- *
- * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
- *
- * DW I2C core starts counting the SCL CNTs for the LOW period
- * of the SCL clock (tLOW) as soon as it pulls the SCL line.
- * In order to meet the tLOW timing spec, we need to take into
- * account the fall time of SCL signal (tf). Default tf value
- * should be 0.3 us, for safety.
- */
- return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
-}
-
-/**
- * i2c_dw_init() - initialize the designware i2c master hardware
- * @dev: device private data
- *
- * This functions configures and enables the I2C master.
- * This function is called during I2C init function, and in case of timeout at
- * run time.
- */
-static void i2c_dw_init(struct dw_i2c_dev *dev)
-{
- u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
- u32 ic_con, hcnt, lcnt;
-
- /* Disable the adapter */
- writel(0, dev->base + DW_IC_ENABLE);
-
- /* set standard and fast speed deviders for high/low periods */
-
- /* Standard-mode */
- hcnt = i2c_dw_scl_hcnt(input_clock_khz,
- 40, /* tHD;STA = tHIGH = 4.0 us */
- 3, /* tf = 0.3 us */
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(input_clock_khz,
- 47, /* tLOW = 4.7 us */
- 3, /* tf = 0.3 us */
- 0); /* No offset */
- writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT);
- writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT);
- dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
-
- /* Fast-mode */
- hcnt = i2c_dw_scl_hcnt(input_clock_khz,
- 6, /* tHD;STA = tHIGH = 0.6 us */
- 3, /* tf = 0.3 us */
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(input_clock_khz,
- 13, /* tLOW = 1.3 us */
- 3, /* tf = 0.3 us */
- 0); /* No offset */
- writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT);
- writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT);
- dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
-
- /* Configure Tx/Rx FIFO threshold levels */
- writel(dev->tx_fifo_depth - 1, dev->base + DW_IC_TX_TL);
- writel(0, dev->base + DW_IC_RX_TL);
-
- /* configure the i2c master */
- ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
- DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
- writel(ic_con, dev->base + DW_IC_CON);
-}
-
-/*
- * Waiting for bus not busy
- */
-static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
-{
- int timeout = TIMEOUT;
-
- while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
- if (timeout <= 0) {
- dev_warn(dev->dev, "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
- }
- timeout--;
- mdelay(1);
- }
-
- return 0;
-}
-
-static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
-{
- struct i2c_msg *msgs = dev->msgs;
- u32 ic_con;
-
- /* Disable the adapter */
- writel(0, dev->base + DW_IC_ENABLE);
-
- /* set the slave (target) address */
- writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
-
- /* if the slave address is ten bit address, enable 10BITADDR */
- ic_con = readl(dev->base + DW_IC_CON);
- if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
- ic_con |= DW_IC_CON_10BITADDR_MASTER;
- else
- ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
- writel(ic_con, dev->base + DW_IC_CON);
-
- /* Enable the adapter */
- writel(1, dev->base + DW_IC_ENABLE);
-
- /* Enable interrupts */
- writel(DW_IC_INTR_DEFAULT_MASK, dev->base + DW_IC_INTR_MASK);
-}
-
-/*
- * Initiate (and continue) low level master read/write transaction.
- * This function is only called from i2c_dw_isr, and pumping i2c_msg
- * messages into the tx buffer. Even if the size of i2c_msg data is
- * longer than the size of the tx buffer, it handles everything.
- */
-static void
-i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
-{
- struct i2c_msg *msgs = dev->msgs;
- u32 intr_mask;
- int tx_limit, rx_limit;
- u32 addr = msgs[dev->msg_write_idx].addr;
- u32 buf_len = dev->tx_buf_len;
- u8 *buf = dev->tx_buf;
-
- intr_mask = DW_IC_INTR_DEFAULT_MASK;
-
- for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
- /*
- * if target address has changed, we need to
- * reprogram the target address in the i2c
- * adapter when we are done with this transfer
- */
- if (msgs[dev->msg_write_idx].addr != addr) {
- dev_err(dev->dev,
- "%s: invalid target address\n", __func__);
- dev->msg_err = -EINVAL;
- break;
- }
-
- if (msgs[dev->msg_write_idx].len == 0) {
- dev_err(dev->dev,
- "%s: invalid message length\n", __func__);
- dev->msg_err = -EINVAL;
- break;
- }
-
- if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
- /* new i2c_msg */
- buf = msgs[dev->msg_write_idx].buf;
- buf_len = msgs[dev->msg_write_idx].len;
- }
-
- tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
- rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
-
- while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
- if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
- writel(0x100, dev->base + DW_IC_DATA_CMD);
- rx_limit--;
- } else
- writel(*buf++, dev->base + DW_IC_DATA_CMD);
- tx_limit--; buf_len--;
- }
-
- dev->tx_buf = buf;
- dev->tx_buf_len = buf_len;
-
- if (buf_len > 0) {
- /* more bytes to be written */
- dev->status |= STATUS_WRITE_IN_PROGRESS;
- break;
- } else
- dev->status &= ~STATUS_WRITE_IN_PROGRESS;
- }
-
- /*
- * If i2c_msg index search is completed, we don't need TX_EMPTY
- * interrupt any more.
- */
- if (dev->msg_write_idx == dev->msgs_num)
- intr_mask &= ~DW_IC_INTR_TX_EMPTY;
-
- if (dev->msg_err)
- intr_mask = 0;
-
- writel(intr_mask, dev->base + DW_IC_INTR_MASK);
-}
-
-static void
-i2c_dw_read(struct dw_i2c_dev *dev)
-{
- struct i2c_msg *msgs = dev->msgs;
- int rx_valid;
-
- for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
- u32 len;
- u8 *buf;
-
- if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
- continue;
-
- if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
- len = msgs[dev->msg_read_idx].len;
- buf = msgs[dev->msg_read_idx].buf;
- } else {
- len = dev->rx_buf_len;
- buf = dev->rx_buf;
- }
-
- rx_valid = readl(dev->base + DW_IC_RXFLR);
-
- for (; len > 0 && rx_valid > 0; len--, rx_valid--)
- *buf++ = readl(dev->base + DW_IC_DATA_CMD);
-
- if (len > 0) {
- dev->status |= STATUS_READ_IN_PROGRESS;
- dev->rx_buf_len = len;
- dev->rx_buf = buf;
- return;
- } else
- dev->status &= ~STATUS_READ_IN_PROGRESS;
- }
-}
-
-static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
-{
- unsigned long abort_source = dev->abort_source;
- int i;
-
- if (abort_source & DW_IC_TX_ABRT_NOACK) {
- for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
- dev_dbg(dev->dev,
- "%s: %s\n", __func__, abort_sources[i]);
- return -EREMOTEIO;
- }
-
- for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
- dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
-
- if (abort_source & DW_IC_TX_ARB_LOST)
- return -EAGAIN;
- else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
- return -EINVAL; /* wrong msgs[] data */
- else
- return -EIO;
-}
-
-/*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
- */
-static int
-i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-{
- struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
- int ret;
-
- dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
-
- mutex_lock(&dev->lock);
-
- INIT_COMPLETION(dev->cmd_complete);
- dev->msgs = msgs;
- dev->msgs_num = num;
- dev->cmd_err = 0;
- dev->msg_write_idx = 0;
- dev->msg_read_idx = 0;
- dev->msg_err = 0;
- dev->status = STATUS_IDLE;
- dev->abort_source = 0;
-
- ret = i2c_dw_wait_bus_not_busy(dev);
- if (ret < 0)
- goto done;
-
- /* start the transfers */
- i2c_dw_xfer_init(dev);
-
- /* wait for tx to complete */
- ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
- if (ret == 0) {
- dev_err(dev->dev, "controller timed out\n");
- i2c_dw_init(dev);
- ret = -ETIMEDOUT;
- goto done;
- } else if (ret < 0)
- goto done;
-
- if (dev->msg_err) {
- ret = dev->msg_err;
- goto done;
- }
-
- /* no error */
- if (likely(!dev->cmd_err)) {
- /* Disable the adapter */
- writel(0, dev->base + DW_IC_ENABLE);
- ret = num;
- goto done;
- }
-
- /* We have an error */
- if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
- ret = i2c_dw_handle_tx_abort(dev);
- goto done;
- }
- ret = -EIO;
-
-done:
- mutex_unlock(&dev->lock);
-
- return ret;
-}
-
-static u32 i2c_dw_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C |
- I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_I2C_BLOCK;
-}
-
-static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
-{
- u32 stat;
-
- /*
- * The IC_INTR_STAT register just indicates "enabled" interrupts.
- * Ths unmasked raw version of interrupt status bits are available
- * in the IC_RAW_INTR_STAT register.
- *
- * That is,
- * stat = readl(IC_INTR_STAT);
- * equals to,
- * stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
- *
- * The raw version might be useful for debugging purposes.
- */
- stat = readl(dev->base + DW_IC_INTR_STAT);
-
- /*
- * Do not use the IC_CLR_INTR register to clear interrupts, or
- * you'll miss some interrupts, triggered during the period from
- * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
- *
- * Instead, use the separately-prepared IC_CLR_* registers.
- */
- if (stat & DW_IC_INTR_RX_UNDER)
- readl(dev->base + DW_IC_CLR_RX_UNDER);
- if (stat & DW_IC_INTR_RX_OVER)
- readl(dev->base + DW_IC_CLR_RX_OVER);
- if (stat & DW_IC_INTR_TX_OVER)
- readl(dev->base + DW_IC_CLR_TX_OVER);
- if (stat & DW_IC_INTR_RD_REQ)
- readl(dev->base + DW_IC_CLR_RD_REQ);
- if (stat & DW_IC_INTR_TX_ABRT) {
- /*
- * The IC_TX_ABRT_SOURCE register is cleared whenever
- * the IC_CLR_TX_ABRT is read. Preserve it beforehand.
- */
- dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
- readl(dev->base + DW_IC_CLR_TX_ABRT);
- }
- if (stat & DW_IC_INTR_RX_DONE)
- readl(dev->base + DW_IC_CLR_RX_DONE);
- if (stat & DW_IC_INTR_ACTIVITY)
- readl(dev->base + DW_IC_CLR_ACTIVITY);
- if (stat & DW_IC_INTR_STOP_DET)
- readl(dev->base + DW_IC_CLR_STOP_DET);
- if (stat & DW_IC_INTR_START_DET)
- readl(dev->base + DW_IC_CLR_START_DET);
- if (stat & DW_IC_INTR_GEN_CALL)
- readl(dev->base + DW_IC_CLR_GEN_CALL);
-
- return stat;
-}
-
-/*
- * Interrupt service routine. This gets called whenever an I2C interrupt
- * occurs.
- */
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
-{
- struct dw_i2c_dev *dev = dev_id;
- u32 stat;
-
- stat = i2c_dw_read_clear_intrbits(dev);
- dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
-
- if (stat & DW_IC_INTR_TX_ABRT) {
- dev->cmd_err |= DW_IC_ERR_TX_ABRT;
- dev->status = STATUS_IDLE;
-
- /*
- * Anytime TX_ABRT is set, the contents of the tx/rx
- * buffers are flushed. Make sure to skip them.
- */
- writel(0, dev->base + DW_IC_INTR_MASK);
- goto tx_aborted;
- }
-
- if (stat & DW_IC_INTR_RX_FULL)
- i2c_dw_read(dev);
-
- if (stat & DW_IC_INTR_TX_EMPTY)
- i2c_dw_xfer_msg(dev);
-
- /*
- * No need to modify or disable the interrupt mask here.
- * i2c_dw_xfer_msg() will take care of it according to
- * the current transmit status.
- */
-
-tx_aborted:
- if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
- complete(&dev->cmd_complete);
-
- return IRQ_HANDLED;
-}
-
-static struct i2c_algorithm i2c_dw_algo = {
- .master_xfer = i2c_dw_xfer,
- .functionality = i2c_dw_func,
-};
-
-static int __devinit dw_i2c_probe(struct platform_device *pdev)
-{
- struct dw_i2c_dev *dev;
- struct i2c_adapter *adap;
- struct resource *mem, *ioarea;
- int irq, r;
-
- /* NOTE: driver uses the static register mapping */
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no irq resource?\n");
- return irq; /* -ENXIO */
- }
-
- ioarea = request_mem_region(mem->start, resource_size(mem),
- pdev->name);
- if (!ioarea) {
- dev_err(&pdev->dev, "I2C region already claimed\n");
- return -EBUSY;
- }
-
- dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
- if (!dev) {
- r = -ENOMEM;
- goto err_release_region;
- }
-
- init_completion(&dev->cmd_complete);
- mutex_init(&dev->lock);
- dev->dev = get_device(&pdev->dev);
- dev->irq = irq;
- platform_set_drvdata(pdev, dev);
-
- dev->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(dev->clk)) {
- r = -ENODEV;
- goto err_free_mem;
- }
- clk_enable(dev->clk);
-
- dev->base = ioremap(mem->start, resource_size(mem));
- if (dev->base == NULL) {
- dev_err(&pdev->dev, "failure mapping io resources\n");
- r = -EBUSY;
- goto err_unuse_clocks;
- }
- {
- u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1);
-
- dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
- dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
- }
- i2c_dw_init(dev);
-
- writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
- r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
- if (r) {
- dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
- goto err_iounmap;
- }
-
- adap = &dev->adapter;
- i2c_set_adapdata(adap, dev);
- adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON;
- strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
- sizeof(adap->name));
- adap->algo = &i2c_dw_algo;
- adap->dev.parent = &pdev->dev;
-
- adap->nr = pdev->id;
- r = i2c_add_numbered_adapter(adap);
- if (r) {
- dev_err(&pdev->dev, "failure adding adapter\n");
- goto err_free_irq;
- }
-
- return 0;
-
-err_free_irq:
- free_irq(dev->irq, dev);
-err_iounmap:
- iounmap(dev->base);
-err_unuse_clocks:
- clk_disable(dev->clk);
- clk_put(dev->clk);
- dev->clk = NULL;
-err_free_mem:
- platform_set_drvdata(pdev, NULL);
- put_device(&pdev->dev);
- kfree(dev);
-err_release_region:
- release_mem_region(mem->start, resource_size(mem));
-
- return r;
-}
-
-static int __devexit dw_i2c_remove(struct platform_device *pdev)
-{
- struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
- struct resource *mem;
-
- platform_set_drvdata(pdev, NULL);
- i2c_del_adapter(&dev->adapter);
- put_device(&pdev->dev);
-
- clk_disable(dev->clk);
- clk_put(dev->clk);
- dev->clk = NULL;
-
- writel(0, dev->base + DW_IC_ENABLE);
- free_irq(dev->irq, dev);
- kfree(dev);
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, resource_size(mem));
- return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:i2c_designware");
-
-static struct platform_driver dw_i2c_driver = {
- .remove = __devexit_p(dw_i2c_remove),
- .driver = {
- .name = "i2c_designware",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init dw_i2c_init_driver(void)
-{
- return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
-}
-module_init(dw_i2c_init_driver);
-
-static void __exit dw_i2c_exit_driver(void)
-{
- platform_driver_unregister(&dw_i2c_driver);
-}
-module_exit(dw_i2c_exit_driver);
-
-MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
-MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index ce1a32b7..8cebef4 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -64,6 +64,7 @@
#define TEN_BIT_ADDR_DEFAULT 0xF000
#define TEN_BIT_ADDR_MASK 0xF0
#define PCH_START 0x0020
+#define PCH_RESTART 0x0004
#define PCH_ESR_START 0x0001
#define PCH_BUFF_START 0x1
#define PCH_REPSTART 0x0004
@@ -273,23 +274,24 @@
s32 timeout)
{
void __iomem *p = adap->pch_base_address;
+ ktime_t ns_val;
+
+ if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
+ return 0;
/* MAX timeout value is timeout*1000*1000nsec */
- ktime_t ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
+ ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
do {
- if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
- break;
msleep(20);
+ if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
+ return 0;
} while (ktime_lt(ktime_get(), ns_val));
pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
+ pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
+ pch_i2c_init(adap);
- if (timeout == 0) {
- pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
- return -ETIME;
- }
-
- return 0;
+ return -ETIME;
}
/**
@@ -311,21 +313,19 @@
*/
static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
{
- s32 ret;
+ long ret;
ret = wait_event_timeout(pch_event,
(adap->pch_event_flag != 0), msecs_to_jiffies(50));
- if (ret < 0) {
- pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
- return ret;
- }
if (ret == 0) {
pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
+ adap->pch_event_flag = 0;
return -ETIMEDOUT;
}
if (adap->pch_event_flag & I2C_ERROR_MASK) {
pch_err(adap, "error bits set: %x\n", adap->pch_event_flag);
+ adap->pch_event_flag = 0;
return -EIO;
}
@@ -394,6 +394,7 @@
u32 addr_2_msb;
u32 addr_8_lsb;
s32 wrcount;
+ s32 rtn;
void __iomem *p = adap->pch_base_address;
length = msgs->len;
@@ -412,15 +413,29 @@
}
if (msgs->flags & I2C_M_TEN) {
- addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
+ addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7) & 0x06;
iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
if (first)
pch_i2c_start(adap);
- if (pch_i2c_wait_for_xfer_complete(adap) == 0 &&
- pch_i2c_getack(adap) == 0) {
+
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
addr_8_lsb = (addr & I2C_ADDR_MSK);
iowrite32(addr_8_lsb, p + PCH_I2CDR);
- } else {
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
pch_i2c_stop(adap);
return -ETIME;
}
@@ -431,31 +446,52 @@
pch_i2c_start(adap);
}
- if ((pch_i2c_wait_for_xfer_complete(adap) == 0) &&
- (pch_i2c_getack(adap) == 0)) {
- for (wrcount = 0; wrcount < length; ++wrcount) {
- /* write buffer value to I2C data register */
- iowrite32(buf[wrcount], p + PCH_I2CDR);
- pch_dbg(adap, "writing %x to Data register\n",
- buf[wrcount]);
-
- if (pch_i2c_wait_for_xfer_complete(adap) != 0)
- return -ETIME;
-
- if (pch_i2c_getack(adap))
- return -EIO;
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
}
-
- /* check if this is the last message */
- if (last)
- pch_i2c_stop(adap);
- else
- pch_i2c_repstart(adap);
- } else {
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
pch_i2c_stop(adap);
- return -EIO;
+ return -ETIME;
}
+ for (wrcount = 0; wrcount < length; ++wrcount) {
+ /* write buffer value to I2C data register */
+ iowrite32(buf[wrcount], p + PCH_I2CDR);
+ pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
+
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMCF_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
+ }
+
+ /* check if this is the last message */
+ if (last)
+ pch_i2c_stop(adap);
+ else
+ pch_i2c_repstart(adap);
+
pch_dbg(adap, "return=%d\n", wrcount);
return wrcount;
@@ -484,6 +520,19 @@
}
/**
+ * pch_i2c_restart() - Generate I2C restart condition in normal mode.
+ * @adap: Pointer to struct i2c_algo_pch_data.
+ *
+ * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA.
+ */
+static void pch_i2c_restart(struct i2c_algo_pch_data *adap)
+{
+ void __iomem *p = adap->pch_base_address;
+ pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+ pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_RESTART);
+}
+
+/**
* pch_i2c_readbytes() - read data from I2C bus in normal mode.
* @i2c_adap: Pointer to the struct i2c_adapter.
* @msgs: Pointer to i2c_msg structure.
@@ -500,7 +549,9 @@
u32 length;
u32 addr;
u32 addr_2_msb;
+ u32 addr_8_lsb;
void __iomem *p = adap->pch_base_address;
+ s32 rtn;
length = msgs->len;
buf = msgs->buf;
@@ -515,9 +566,55 @@
}
if (msgs->flags & I2C_M_TEN) {
- addr_2_msb = (((addr & I2C_MSB_2B_MSK) >> 7) | (I2C_RD));
+ addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
+ if (first)
+ pch_i2c_start(adap);
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ addr_8_lsb = (addr & I2C_ADDR_MSK);
+ iowrite32(addr_8_lsb, p + PCH_I2CDR);
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
+ pch_i2c_restart(adap);
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ addr_2_msb |= I2C_RD;
+ iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK,
+ p + PCH_I2CDR);
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
} else {
/* 7 address bits + R/W bit */
addr = (((addr) << 1) | (I2C_RD));
@@ -528,56 +625,81 @@
if (first)
pch_i2c_start(adap);
- if ((pch_i2c_wait_for_xfer_complete(adap) == 0) &&
- (pch_i2c_getack(adap) == 0)) {
- pch_dbg(adap, "return %d\n", 0);
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
- if (length == 0) {
- pch_i2c_stop(adap);
- ioread32(p + PCH_I2CDR); /* Dummy read needs */
+ if (length == 0) {
+ pch_i2c_stop(adap);
+ ioread32(p + PCH_I2CDR); /* Dummy read needs */
- count = length;
- } else {
- int read_index;
- int loop;
- pch_i2c_sendack(adap);
+ count = length;
+ } else {
+ int read_index;
+ int loop;
+ pch_i2c_sendack(adap);
- /* Dummy read */
- for (loop = 1, read_index = 0; loop < length; loop++) {
- buf[read_index] = ioread32(p + PCH_I2CDR);
-
- if (loop != 1)
- read_index++;
-
- if (pch_i2c_wait_for_xfer_complete(adap) != 0) {
- pch_i2c_stop(adap);
- return -ETIME;
- }
- } /* end for */
-
- pch_i2c_sendnack(adap);
-
+ /* Dummy read */
+ for (loop = 1, read_index = 0; loop < length; loop++) {
buf[read_index] = ioread32(p + PCH_I2CDR);
- if (length != 1)
+ if (loop != 1)
read_index++;
- if (pch_i2c_wait_for_xfer_complete(adap) == 0) {
- if (last)
- pch_i2c_stop(adap);
- else
- pch_i2c_repstart(adap);
-
- buf[read_index++] = ioread32(p + PCH_I2CDR);
- count = read_index;
- } else {
- count = -ETIME;
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave"
+ "address setting\n");
+ return -EIO;
+ }
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
}
+ } /* end for */
+
+ pch_i2c_sendnack(adap);
+
+ buf[read_index] = ioread32(p + PCH_I2CDR); /* Read final - 1 */
+
+ if (length != 1)
+ read_index++;
+
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave"
+ "address setting\n");
+ return -EIO;
+ }
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
}
- } else {
- count = -ETIME;
- pch_i2c_stop(adap);
+
+ if (last)
+ pch_i2c_stop(adap);
+ else
+ pch_i2c_repstart(adap);
+
+ buf[read_index++] = ioread32(p + PCH_I2CDR); /* Read Final */
+ count = read_index;
}
return count;
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 3876a247..63bb1cc2a 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -387,7 +387,7 @@
dev->irq = 0;
if (dev->irq) {
- ret = request_irq(dev->irq, highlander_i2c_irq, IRQF_DISABLED,
+ ret = request_irq(dev->irq, highlander_i2c_irq, 0,
pdev->name, dev);
if (unlikely(ret))
goto err_unmap;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 4c2a62b..58832e5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -125,6 +128,11 @@
unsigned int ifdr; /* IMX_I2C_IFDR */
};
+static const struct of_device_id i2c_imx_dt_ids[] = {
+ { .compatible = "fsl,imx1-i2c", },
+ { /* sentinel */ }
+};
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -466,10 +474,10 @@
{
struct imx_i2c_struct *i2c_imx;
struct resource *res;
- struct imxi2c_platform_data *pdata;
+ struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
- int irq;
+ int irq, bitrate;
int ret;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -485,19 +493,11 @@
return -ENOENT;
}
- pdata = pdev->dev.platform_data;
-
- if (pdata && pdata->init) {
- ret = pdata->init(&pdev->dev);
- if (ret)
- return ret;
- }
-
res_size = resource_size(res);
if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- ret = -EBUSY;
- goto fail0;
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ return -EBUSY;
}
base = ioremap(res->start, res_size);
@@ -520,6 +520,7 @@
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->irq = irq;
i2c_imx->base = base;
i2c_imx->res = res;
@@ -546,10 +547,12 @@
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
/* Set up clock divider */
- if (pdata && pdata->bitrate)
- i2c_imx_set_clk(i2c_imx, pdata->bitrate);
- else
- i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+ bitrate = IMX_I2C_BIT_RATE;
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &bitrate);
+ if (ret < 0 && pdata && pdata->bitrate)
+ bitrate = pdata->bitrate;
+ i2c_imx_set_clk(i2c_imx, bitrate);
/* Set up chip registers to defaults */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -562,6 +565,8 @@
goto fail5;
}
+ of_i2c_register_devices(&i2c_imx->adapter);
+
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
@@ -586,16 +591,12 @@
iounmap(base);
fail1:
release_mem_region(res->start, resource_size(res));
-fail0:
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
return ret; /* Return error number */
}
static int __exit i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
/* remove adapter */
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -611,10 +612,6 @@
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- /* Shut down hardware */
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
-
clk_put(i2c_imx->clk);
iounmap(i2c_imx->base);
@@ -628,6 +625,7 @@
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = i2c_imx_dt_ids,
}
};
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5d8aed5..c01e951 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -35,7 +35,7 @@
#include <linux/slab.h>
#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static inline int ixp2000_scl_pin(void *data)
{
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index b228e09..5267ab9 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -63,11 +63,11 @@
/* Master controller (MCR) register */
#define I2C_MCR_OP (0x1 << 0) /* Operation */
#define I2C_MCR_A7 (0x7f << 1) /* 7-bit address */
-#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
+#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
#define I2C_MCR_SB (0x1 << 11) /* Extended address */
#define I2C_MCR_AM (0x3 << 12) /* Address type */
-#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
-#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
+#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
+#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
/* Status register (SR) */
#define I2C_SR_OP (0x3 << 0) /* Operation */
@@ -77,7 +77,7 @@
#define I2C_SR_LENGTH (0x7ff << 9) /* Transfer length */
/* Interrupt mask set/clear (IMSCR) bits */
-#define I2C_IT_TXFE (0x1 << 0)
+#define I2C_IT_TXFE (0x1 << 0)
#define I2C_IT_TXFNE (0x1 << 1)
#define I2C_IT_TXFF (0x1 << 2)
#define I2C_IT_TXFOVR (0x1 << 3)
@@ -135,31 +135,31 @@
};
/**
- * struct nmk_i2c_dev - private data structure of the controller
- * @pdev: parent platform device
- * @adap: corresponding I2C adapter
- * @irq: interrupt line for the controller
- * @virtbase: virtual io memory area
- * @clk: hardware i2c block clock
- * @cfg: machine provided controller configuration
- * @cli: holder of client specific data
- * @stop: stop condition
- * @xfer_complete: acknowledge completion for a I2C message
- * @result: controller propogated result
- * @regulator: pointer to i2c regulator
- * @busy: Busy doing transfer
+ * struct nmk_i2c_dev - private data structure of the controller.
+ * @pdev: parent platform device.
+ * @adap: corresponding I2C adapter.
+ * @irq: interrupt line for the controller.
+ * @virtbase: virtual io memory area.
+ * @clk: hardware i2c block clock.
+ * @cfg: machine provided controller configuration.
+ * @cli: holder of client specific data.
+ * @stop: stop condition.
+ * @xfer_complete: acknowledge completion for a I2C message.
+ * @result: controller propogated result.
+ * @regulator: pointer to i2c regulator.
+ * @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
struct platform_device *pdev;
- struct i2c_adapter adap;
- int irq;
+ struct i2c_adapter adap;
+ int irq;
void __iomem *virtbase;
struct clk *clk;
struct nmk_i2c_controller cfg;
struct i2c_nmk_client cli;
- int stop;
+ int stop;
struct completion xfer_complete;
- int result;
+ int result;
struct regulator *regulator;
bool busy;
};
@@ -217,8 +217,9 @@
}
}
- dev_err(&dev->pdev->dev, "flushing operation timed out "
- "giving up after %d attempts", LOOP_ATTEMPTS);
+ dev_err(&dev->pdev->dev,
+ "flushing operation timed out giving up after %d attempts",
+ LOOP_ATTEMPTS);
return -ETIMEDOUT;
}
@@ -270,7 +271,7 @@
}
/* enable peripheral, master mode operation */
-#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
+#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
/**
* load_i2c_mcr_reg() - load the MCR register
@@ -363,8 +364,8 @@
* and high speed (up to 3.4 Mb/s)
*/
if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
- dev_err(&dev->pdev->dev, "do not support this mode "
- "defaulting to std. mode\n");
+ dev_err(&dev->pdev->dev,
+ "do not support this mode defaulting to std. mode\n");
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
writel(I2C_FREQ_MODE_STANDARD << 4,
@@ -423,7 +424,7 @@
if (timeout < 0) {
dev_err(&dev->pdev->dev,
- "wait_for_completion_timeout"
+ "wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
}
@@ -556,8 +557,8 @@
if (((i2c_sr >> 2) & 0x3) == 0x3) {
/* get the abort cause */
cause = (i2c_sr >> 4) & 0x7;
- dev_err(&dev->pdev->dev, "%s\n", cause
- >= ARRAY_SIZE(abort_causes) ?
+ dev_err(&dev->pdev->dev, "%s\n",
+ cause >= ARRAY_SIZE(abort_causes) ?
"unknown reason" :
abort_causes[cause]);
}
@@ -582,13 +583,13 @@
*
* NOTE:
* READ TRANSFER : We impose a restriction of the first message to be the
- * index message for any read transaction.
- * - a no index is coded as '0',
- * - 2byte big endian index is coded as '3'
- * !!! msg[0].buf holds the actual index.
- * This is compatible with generic messages of smbus emulator
- * that send a one byte index.
- * eg. a I2C transation to read 2 bytes from index 0
+ * index message for any read transaction.
+ * - a no index is coded as '0',
+ * - 2byte big endian index is coded as '3'
+ * !!! msg[0].buf holds the actual index.
+ * This is compatible with generic messages of smbus emulator
+ * that send a one byte index.
+ * eg. a I2C transation to read 2 bytes from index 0
* idx = 0;
* msg[0].addr = client->addr;
* msg[0].flags = 0x0;
@@ -644,8 +645,8 @@
for (i = 0; i < num_msgs; i++) {
if (unlikely(msgs[i].flags & I2C_M_TEN)) {
- dev_err(&dev->pdev->dev, "10 bit addressing"
- "not supported\n");
+ dev_err(&dev->pdev->dev,
+ "10 bit addressing not supported\n");
status = -EINVAL;
goto out;
@@ -789,8 +790,9 @@
if (dev->cli.count) {
dev->result = -EIO;
- dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
- "xfered\n", dev->cli.count);
+ dev_err(&dev->pdev->dev,
+ "%lu bytes still remain to be xfered\n",
+ dev->cli.count);
(void) init_hw(dev);
}
complete(&dev->xfer_complete);
@@ -923,7 +925,7 @@
}
if (request_mem_region(res->start, resource_size(res),
- DRIVER_NAME "I/O region") == NULL) {
+ DRIVER_NAME "I/O region") == NULL) {
ret = -EBUSY;
goto err_no_region;
}
@@ -935,7 +937,7 @@
}
dev->irq = platform_get_irq(pdev, 0);
- ret = request_irq(dev->irq, i2c_irq_handler, IRQF_DISABLED,
+ ret = request_irq(dev->irq, i2c_irq_handler, 0,
DRIVER_NAME, dev);
if (ret) {
dev_err(&pdev->dev, "cannot claim the irq %d\n", dev->irq);
@@ -980,8 +982,9 @@
i2c_set_adapdata(adap, dev);
- dev_info(&pdev->dev, "initialize %s on virtual "
- "base %p\n", adap->name, dev->virtbase);
+ dev_info(&pdev->dev,
+ "initialize %s on virtual base %p\n",
+ adap->name, dev->virtbase);
ret = i2c_add_numbered_adapter(adap);
if (ret) {
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index 7243426..835e47b 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -610,7 +610,7 @@
goto err_iomap;
}
- ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_DISABLED | IRQF_SHARED,
+ ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_SHARED,
dev_name(&pdev->dev), i2c);
if (ret != 0) {
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2dfb631..a43d002 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -42,12 +42,12 @@
#include <linux/pm_runtime.h>
/* I2C controller revisions */
-#define OMAP_I2C_REV_2 0x20
+#define OMAP_I2C_OMAP1_REV_2 0x20
/* I2C controller revisions present on specific hardware */
#define OMAP_I2C_REV_ON_2430 0x36
#define OMAP_I2C_REV_ON_3430 0x3C
-#define OMAP_I2C_REV_ON_4430 0x40
+#define OMAP_I2C_REV_ON_3530_4430 0x40
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -72,11 +72,12 @@
OMAP_I2C_SCLH_REG,
OMAP_I2C_SYSTEST_REG,
OMAP_I2C_BUFSTAT_REG,
- OMAP_I2C_REVNB_LO,
- OMAP_I2C_REVNB_HI,
- OMAP_I2C_IRQSTATUS_RAW,
- OMAP_I2C_IRQENABLE_SET,
- OMAP_I2C_IRQENABLE_CLR,
+ /* only on OMAP4430 */
+ OMAP_I2C_IP_V2_REVNB_LO,
+ OMAP_I2C_IP_V2_REVNB_HI,
+ OMAP_I2C_IP_V2_IRQSTATUS_RAW,
+ OMAP_I2C_IP_V2_IRQENABLE_SET,
+ OMAP_I2C_IP_V2_IRQENABLE_CLR,
};
/* I2C Interrupt Enable Register (OMAP_I2C_IE): */
@@ -193,7 +194,6 @@
*/
u8 rev;
unsigned b_hw:1; /* bad h/w fixes */
- unsigned idle:1;
u16 iestate; /* Saved interrupt register */
u16 pscstate;
u16 scllstate;
@@ -204,7 +204,7 @@
u16 errata;
};
-static const u8 reg_map[] = {
+static const u8 reg_map_ip_v1[] = {
[OMAP_I2C_REV_REG] = 0x00,
[OMAP_I2C_IE_REG] = 0x01,
[OMAP_I2C_STAT_REG] = 0x02,
@@ -225,7 +225,7 @@
[OMAP_I2C_BUFSTAT_REG] = 0x10,
};
-static const u8 omap4_reg_map[] = {
+static const u8 reg_map_ip_v2[] = {
[OMAP_I2C_REV_REG] = 0x04,
[OMAP_I2C_IE_REG] = 0x2c,
[OMAP_I2C_STAT_REG] = 0x28,
@@ -244,11 +244,11 @@
[OMAP_I2C_SCLH_REG] = 0xb8,
[OMAP_I2C_SYSTEST_REG] = 0xbC,
[OMAP_I2C_BUFSTAT_REG] = 0xc0,
- [OMAP_I2C_REVNB_LO] = 0x00,
- [OMAP_I2C_REVNB_HI] = 0x04,
- [OMAP_I2C_IRQSTATUS_RAW] = 0x24,
- [OMAP_I2C_IRQENABLE_SET] = 0x2c,
- [OMAP_I2C_IRQENABLE_CLR] = 0x30,
+ [OMAP_I2C_IP_V2_REVNB_LO] = 0x00,
+ [OMAP_I2C_IP_V2_REVNB_HI] = 0x04,
+ [OMAP_I2C_IP_V2_IRQSTATUS_RAW] = 0x24,
+ [OMAP_I2C_IP_V2_IRQENABLE_SET] = 0x2c,
+ [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30,
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -266,17 +266,11 @@
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
- struct platform_device *pdev;
struct omap_i2c_bus_platform_data *pdata;
- WARN_ON(!dev->idle);
+ pdata = dev->dev->platform_data;
- pdev = to_platform_device(dev->dev);
- pdata = pdev->dev.platform_data;
-
- pm_runtime_get_sync(&pdev->dev);
-
- if (cpu_is_omap34xx()) {
+ if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
@@ -286,7 +280,6 @@
omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
}
- dev->idle = 0;
/*
* Don't write to this register if the IE state is 0 as it can
@@ -298,32 +291,25 @@
static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
- struct platform_device *pdev;
struct omap_i2c_bus_platform_data *pdata;
u16 iv;
- WARN_ON(dev->idle);
-
- pdev = to_platform_device(dev->dev);
- pdata = pdev->dev.platform_data;
+ pdata = dev->dev->platform_data;
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
- if (dev->rev >= OMAP_I2C_REV_ON_4430)
- omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1);
+ if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
else
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
- if (dev->rev < OMAP_I2C_REV_2) {
+ if (dev->rev < OMAP_I2C_OMAP1_REV_2) {
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
- /* Flush posted write before the dev->idle store occurs */
+ /* Flush posted write */
omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
}
- dev->idle = 1;
-
- pm_runtime_put_sync(&pdev->dev);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -334,8 +320,11 @@
unsigned long timeout;
unsigned long internal_clk = 0;
struct clk *fclk;
+ struct omap_i2c_bus_platform_data *pdata;
- if (dev->rev >= OMAP_I2C_REV_2) {
+ pdata = dev->dev->platform_data;
+
+ if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) &
@@ -378,12 +367,13 @@
* REVISIT: Some wkup sources might not be needed.
*/
dev->westate = OMAP_I2C_WE_ALL;
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+ dev->westate);
}
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- if (cpu_class_is_omap1()) {
+ if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/*
* The I2C functional clock is the armxor_ck, so there's
* no need to get "armxor_ck" separately. Now, if OMAP2420
@@ -407,7 +397,7 @@
psc = fclk_rate / 12000000;
}
- if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
+ if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
/*
* HSI2C controller internal clk rate should be 19.2 Mhz for
@@ -415,7 +405,8 @@
* to get longer filter period for better noise suppression.
* The filter is iclk (fclk for HS) period.
*/
- if (dev->speed > 400 || cpu_is_omap2430())
+ if (dev->speed > 400 ||
+ pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
internal_clk = 19200;
else if (dev->speed > 100)
internal_clk = 9600;
@@ -484,7 +475,7 @@
dev->errata = 0;
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207;
/* Enable interrupts */
@@ -493,7 +484,7 @@
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
- if (cpu_is_omap34xx()) {
+ if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
dev->pscstate = psc;
dev->scllstate = scll;
dev->sclhstate = sclh;
@@ -642,7 +633,7 @@
int i;
int r;
- omap_i2c_unidle(dev);
+ pm_runtime_get_sync(dev->dev);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
@@ -665,7 +656,7 @@
omap_i2c_wait_for_bb(dev);
out:
- omap_i2c_idle(dev);
+ pm_runtime_put(dev->dev);
return r;
}
@@ -720,12 +711,12 @@
#ifdef CONFIG_ARCH_OMAP15XX
static irqreturn_t
-omap_i2c_rev1_isr(int this_irq, void *dev_id)
+omap_i2c_omap1_isr(int this_irq, void *dev_id)
{
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
- if (dev->idle)
+ if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
@@ -774,7 +765,7 @@
return IRQ_HANDLED;
}
#else
-#define omap_i2c_rev1_isr NULL
+#define omap_i2c_omap1_isr NULL
#endif
/*
@@ -813,8 +804,11 @@
u16 bits;
u16 stat, w;
int err, count = 0;
+ struct omap_i2c_bus_platform_data *pdata;
- if (dev->idle)
+ pdata = dev->dev->platform_data;
+
+ if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
@@ -881,8 +875,8 @@
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (cpu_class_is_omap1() ||
- cpu_is_omap2420()) {
+ if (pdata->flags &
+ OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
*dev->buf++ = w >> 8;
dev->buf_len--;
@@ -924,8 +918,8 @@
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (cpu_class_is_omap1() ||
- cpu_is_omap2420()) {
+ if (pdata->flags &
+ OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
w |= *dev->buf++ << 8;
dev->buf_len--;
@@ -1016,7 +1010,6 @@
}
dev->speed = speed;
- dev->idle = 1;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, resource_size(mem));
@@ -1027,27 +1020,22 @@
platform_set_drvdata(pdev, dev);
- if (cpu_is_omap7xx())
- dev->reg_shift = 1;
- else if (cpu_is_omap44xx())
- dev->reg_shift = 0;
- else
- dev->reg_shift = 2;
+ dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
- if (cpu_is_omap44xx())
- dev->regs = (u8 *) omap4_reg_map;
+ if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ dev->regs = (u8 *)reg_map_ip_v2;
else
- dev->regs = (u8 *) reg_map;
+ dev->regs = (u8 *)reg_map_ip_v1;
- pm_runtime_enable(&pdev->dev);
- omap_i2c_unidle(dev);
+ pm_runtime_enable(dev->dev);
+ pm_runtime_get_sync(dev->dev);
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
if (dev->rev <= OMAP_I2C_REV_ON_3430)
dev->errata |= I2C_OMAP3_1P153;
- if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
+ if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
/* Set up the fifo size - Get total size */
@@ -1059,7 +1047,7 @@
* size. This is to ensure that we can handle the status on int
* call back latencies.
*/
- if (dev->rev >= OMAP_I2C_REV_ON_4430) {
+ if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) {
dev->fifo_size = 0;
dev->b_hw = 0; /* Disable hardware fixes */
} else {
@@ -1075,7 +1063,8 @@
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
- isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
+ isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr :
+ omap_i2c_isr;
r = request_irq(dev->irq, isr, 0, pdev->name, dev);
if (r) {
@@ -1083,10 +1072,10 @@
goto err_unuse_clocks;
}
- dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
- pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+ dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
+ pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
- omap_i2c_idle(dev);
+ pm_runtime_put(dev->dev);
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
@@ -1110,7 +1099,7 @@
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_idle(dev);
+ pm_runtime_put(dev->dev);
iounmap(dev->base);
err_free_mem:
platform_set_drvdata(pdev, NULL);
@@ -1139,12 +1128,43 @@
return 0;
}
+#ifdef CONFIG_PM_RUNTIME
+static int omap_i2c_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+ omap_i2c_idle(_dev);
+
+ return 0;
+}
+
+static int omap_i2c_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+ omap_i2c_unidle(_dev);
+
+ return 0;
+}
+
+static struct dev_pm_ops omap_i2c_pm_ops = {
+ .runtime_suspend = omap_i2c_runtime_suspend,
+ .runtime_resume = omap_i2c_runtime_resume,
+};
+#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
+#else
+#define OMAP_I2C_PM_OPS NULL
+#endif
+
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
+ .pm = OMAP_I2C_PM_OPS,
},
};
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index dfa7ae9..127051b 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -306,7 +306,7 @@
pmcmsptwi_data.irq = platform_get_irq(pldev, 0);
if (pmcmsptwi_data.irq) {
rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt,
- IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
pldev->name, &pmcmsptwi_data);
if (rc == 0) {
/*
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index f84a63c..2754cef8 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,6 +35,8 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/of_i2c.h>
+#include <linux/of_gpio.h>
#include <asm/irq.h>
@@ -78,6 +80,8 @@
struct resource *ioarea;
struct i2c_adapter adap;
+ struct s3c2410_platform_i2c *pdata;
+ int gpios[2];
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
@@ -95,6 +99,12 @@
struct platform_device *pdev = to_platform_device(i2c->dev);
enum s3c24xx_i2c_type type;
+#ifdef CONFIG_OF
+ if (i2c->dev->of_node)
+ return of_device_is_compatible(i2c->dev->of_node,
+ "samsung,s3c2440-i2c");
+#endif
+
type = platform_get_device_id(pdev)->driver_data;
return type == TYPE_S3C2440;
}
@@ -625,7 +635,7 @@
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
{
- struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
+ struct s3c2410_platform_i2c *pdata = i2c->pdata;
unsigned long clkin = clk_get_rate(i2c->clk);
unsigned int divs, div1;
unsigned long target_frequency;
@@ -741,6 +751,49 @@
}
#endif
+#ifdef CONFIG_OF
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+ int idx, gpio, ret;
+
+ for (idx = 0; idx < 2; idx++) {
+ gpio = of_get_gpio(i2c->dev->of_node, idx);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
+ goto free_gpio;
+ }
+
+ ret = gpio_request(gpio, "i2c-bus");
+ if (ret) {
+ dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
+ goto free_gpio;
+ }
+ }
+ return 0;
+
+free_gpio:
+ while (--idx >= 0)
+ gpio_free(i2c->gpios[idx]);
+ return -EINVAL;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+ unsigned int idx;
+ for (idx = 0; idx < 2; idx++)
+ gpio_free(i2c->gpios[idx]);
+}
+#else
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+ return -EINVAL;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
/* s3c24xx_i2c_init
*
* initialise the controller, set the IO lines and frequency
@@ -754,12 +807,15 @@
/* get the plafrom data */
- pdata = i2c->dev->platform_data;
+ pdata = i2c->pdata;
/* inititalise the gpio */
if (pdata->cfg_gpio)
pdata->cfg_gpio(to_platform_device(i2c->dev));
+ else
+ if (s3c24xx_i2c_parse_dt_gpio(i2c))
+ return -EINVAL;
/* write slave address */
@@ -785,6 +841,34 @@
return 0;
}
+#ifdef CONFIG_OF
+/* s3c24xx_i2c_parse_dt
+ *
+ * Parse the device tree node and retreive the platform data.
+*/
+
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
+{
+ struct s3c2410_platform_i2c *pdata = i2c->pdata;
+
+ if (!np)
+ return;
+
+ pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
+ of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
+ of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
+ of_property_read_u32(np, "samsung,i2c-max-bus-freq",
+ (u32 *)&pdata->frequency);
+}
+#else
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
+{
+ return;
+}
+#endif
+
/* s3c24xx_i2c_probe
*
* called by the bus driver when a suitable device is found
@@ -793,14 +877,16 @@
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c;
- struct s3c2410_platform_i2c *pdata;
+ struct s3c2410_platform_i2c *pdata = NULL;
struct resource *res;
int ret;
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
+ if (!pdev->dev.of_node) {
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -EINVAL;
+ }
}
i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
@@ -809,6 +895,17 @@
return -ENOMEM;
}
+ i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!i2c->pdata) {
+ ret = -ENOMEM;
+ goto err_noclk;
+ }
+
+ if (pdata)
+ memcpy(i2c->pdata, pdata, sizeof(*pdata));
+ else
+ s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
+
strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
i2c->adap.owner = THIS_MODULE;
i2c->adap.algo = &s3c24xx_i2c_algorithm;
@@ -883,7 +980,7 @@
goto err_iomap;
}
- ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED,
+ ret = request_irq(i2c->irq, s3c24xx_i2c_irq, 0,
dev_name(&pdev->dev), i2c);
if (ret != 0) {
@@ -903,7 +1000,8 @@
* being bus 0.
*/
- i2c->adap.nr = pdata->bus_num;
+ i2c->adap.nr = i2c->pdata->bus_num;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
@@ -911,6 +1009,7 @@
goto err_cpufreq;
}
+ of_i2c_register_devices(&i2c->adap);
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
@@ -959,6 +1058,7 @@
iounmap(i2c->regs);
release_resource(i2c->ioarea);
+ s3c24xx_i2c_dt_gpio_free(i2c);
kfree(i2c->ioarea);
kfree(i2c);
@@ -1012,6 +1112,17 @@
};
MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_i2c_match[] = {
+ { .compatible = "samsung,s3c2410-i2c" },
+ { .compatible = "samsung,s3c2440-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
+#else
+#define s3c24xx_i2c_match NULL
+#endif
+
static struct platform_driver s3c24xx_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
@@ -1020,6 +1131,7 @@
.owner = THIS_MODULE,
.name = "s3c-i2c",
.pm = S3C24XX_DEV_PM_OPS,
+ .of_match_table = s3c24xx_i2c_match,
},
};
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 3cad8fe..c418c41 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -502,7 +502,7 @@
}
OUT32(id, I2CCCR, ret);
- if (request_irq(id->irq, sh7760_i2c_irq, IRQF_DISABLED,
+ if (request_irq(id->irq, sh7760_i2c_irq, 0,
SH7760_I2C_DEVNAME, id)) {
dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
ret = -EBUSY;
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index f633a53..675c969 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -543,7 +543,7 @@
while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
for (n = res->start; hook && n <= res->end; n++) {
- if (request_irq(n, sh_mobile_i2c_isr, IRQF_DISABLED,
+ if (request_irq(n, sh_mobile_i2c_isr, 0,
dev_name(&dev->dev), dev)) {
for (n--; n >= res->start; n--)
free_irq(n, dev);
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 9987961..4d44af1 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -916,7 +916,7 @@
}
dev->irq = platform_get_irq(pdev, 0);
- if (request_irq(dev->irq, stu300_irh, IRQF_DISABLED,
+ if (request_irq(dev->irq, stu300_irh, 0,
NAME, dev)) {
ret = -EIO;
goto err_no_irq;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3c94c4a..b050530 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -566,7 +566,7 @@
struct clk *clk;
struct clk *i2c_clk;
const unsigned int *prop;
- void *base;
+ void __iomem *base;
int irq;
int ret = 0;
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 986e5f6..91e349c 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -550,7 +550,7 @@
return 0;
}
-static struct platform_driver scx200_pci_drv = {
+static struct platform_driver scx200_pci_driver = {
.driver = {
.name = "cs5535-smb",
.owner = THIS_MODULE,
@@ -593,14 +593,14 @@
return 0;
/* No ISA devices; register the platform driver for PCI-based devices */
- return platform_driver_register(&scx200_pci_drv);
+ return platform_driver_register(&scx200_pci_driver);
}
static void __exit scx200_acb_cleanup(void)
{
struct scx200_acb_iface *iface;
- platform_driver_unregister(&scx200_pci_drv);
+ platform_driver_unregister(&scx200_pci_driver);
mutex_lock(&scx200_acb_list_mutex);
while ((iface = scx200_acb_list) != NULL) {
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 000a78e..6dede8f 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -28,7 +28,7 @@
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/at91sam9_smc.h>
#define DRV_NAME "at91_ide"
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index fc0f2bd..4104ea24 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -889,6 +889,8 @@
break;
case IB_CM_ESTABLISHED:
spin_unlock_irq(&cm_id_priv->lock);
+ if (cm_id_priv->qp_type == IB_QPT_XRC_TGT)
+ break;
ib_send_cm_dreq(cm_id, NULL, 0);
goto retest;
case IB_CM_DREQ_SENT:
@@ -1008,7 +1010,6 @@
req_msg->service_id = param->service_id;
req_msg->local_ca_guid = cm_id_priv->id.device->node_guid;
cm_req_set_local_qpn(req_msg, cpu_to_be32(param->qp_num));
- cm_req_set_resp_res(req_msg, param->responder_resources);
cm_req_set_init_depth(req_msg, param->initiator_depth);
cm_req_set_remote_resp_timeout(req_msg,
param->remote_cm_response_timeout);
@@ -1017,12 +1018,16 @@
cm_req_set_starting_psn(req_msg, cpu_to_be32(param->starting_psn));
cm_req_set_local_resp_timeout(req_msg,
param->local_cm_response_timeout);
- cm_req_set_retry_count(req_msg, param->retry_count);
req_msg->pkey = param->primary_path->pkey;
cm_req_set_path_mtu(req_msg, param->primary_path->mtu);
- cm_req_set_rnr_retry_count(req_msg, param->rnr_retry_count);
cm_req_set_max_cm_retries(req_msg, param->max_cm_retries);
- cm_req_set_srq(req_msg, param->srq);
+
+ if (param->qp_type != IB_QPT_XRC_INI) {
+ cm_req_set_resp_res(req_msg, param->responder_resources);
+ cm_req_set_retry_count(req_msg, param->retry_count);
+ cm_req_set_rnr_retry_count(req_msg, param->rnr_retry_count);
+ cm_req_set_srq(req_msg, param->srq);
+ }
if (pri_path->hop_limit <= 1) {
req_msg->primary_local_lid = pri_path->slid;
@@ -1080,7 +1085,8 @@
if (!param->primary_path)
return -EINVAL;
- if (param->qp_type != IB_QPT_RC && param->qp_type != IB_QPT_UC)
+ if (param->qp_type != IB_QPT_RC && param->qp_type != IB_QPT_UC &&
+ param->qp_type != IB_QPT_XRC_INI)
return -EINVAL;
if (param->private_data &&
@@ -1601,18 +1607,24 @@
cm_format_mad_hdr(&rep_msg->hdr, CM_REP_ATTR_ID, cm_id_priv->tid);
rep_msg->local_comm_id = cm_id_priv->id.local_id;
rep_msg->remote_comm_id = cm_id_priv->id.remote_id;
- cm_rep_set_local_qpn(rep_msg, cpu_to_be32(param->qp_num));
cm_rep_set_starting_psn(rep_msg, cpu_to_be32(param->starting_psn));
rep_msg->resp_resources = param->responder_resources;
- rep_msg->initiator_depth = param->initiator_depth;
cm_rep_set_target_ack_delay(rep_msg,
cm_id_priv->av.port->cm_dev->ack_delay);
cm_rep_set_failover(rep_msg, param->failover_accepted);
- cm_rep_set_flow_ctrl(rep_msg, param->flow_control);
cm_rep_set_rnr_retry_count(rep_msg, param->rnr_retry_count);
- cm_rep_set_srq(rep_msg, param->srq);
rep_msg->local_ca_guid = cm_id_priv->id.device->node_guid;
+ if (cm_id_priv->qp_type != IB_QPT_XRC_TGT) {
+ rep_msg->initiator_depth = param->initiator_depth;
+ cm_rep_set_flow_ctrl(rep_msg, param->flow_control);
+ cm_rep_set_srq(rep_msg, param->srq);
+ cm_rep_set_local_qpn(rep_msg, cpu_to_be32(param->qp_num));
+ } else {
+ cm_rep_set_srq(rep_msg, 1);
+ cm_rep_set_local_eecn(rep_msg, cpu_to_be32(param->qp_num));
+ }
+
if (param->private_data && param->private_data_len)
memcpy(rep_msg->private_data, param->private_data,
param->private_data_len);
@@ -1660,7 +1672,7 @@
cm_id_priv->initiator_depth = param->initiator_depth;
cm_id_priv->responder_resources = param->responder_resources;
cm_id_priv->rq_psn = cm_rep_get_starting_psn(rep_msg);
- cm_id_priv->local_qpn = cm_rep_get_local_qpn(rep_msg);
+ cm_id_priv->local_qpn = cpu_to_be32(param->qp_num & 0xFFFFFF);
out: spin_unlock_irqrestore(&cm_id_priv->lock, flags);
return ret;
@@ -1731,7 +1743,7 @@
}
EXPORT_SYMBOL(ib_send_cm_rtu);
-static void cm_format_rep_event(struct cm_work *work)
+static void cm_format_rep_event(struct cm_work *work, enum ib_qp_type qp_type)
{
struct cm_rep_msg *rep_msg;
struct ib_cm_rep_event_param *param;
@@ -1740,7 +1752,7 @@
param = &work->cm_event.param.rep_rcvd;
param->remote_ca_guid = rep_msg->local_ca_guid;
param->remote_qkey = be32_to_cpu(rep_msg->local_qkey);
- param->remote_qpn = be32_to_cpu(cm_rep_get_local_qpn(rep_msg));
+ param->remote_qpn = be32_to_cpu(cm_rep_get_qpn(rep_msg, qp_type));
param->starting_psn = be32_to_cpu(cm_rep_get_starting_psn(rep_msg));
param->responder_resources = rep_msg->initiator_depth;
param->initiator_depth = rep_msg->resp_resources;
@@ -1808,7 +1820,7 @@
return -EINVAL;
}
- cm_format_rep_event(work);
+ cm_format_rep_event(work, cm_id_priv->qp_type);
spin_lock_irq(&cm_id_priv->lock);
switch (cm_id_priv->id.state) {
@@ -1823,7 +1835,7 @@
cm_id_priv->timewait_info->work.remote_id = rep_msg->local_comm_id;
cm_id_priv->timewait_info->remote_ca_guid = rep_msg->local_ca_guid;
- cm_id_priv->timewait_info->remote_qpn = cm_rep_get_local_qpn(rep_msg);
+ cm_id_priv->timewait_info->remote_qpn = cm_rep_get_qpn(rep_msg, cm_id_priv->qp_type);
spin_lock(&cm.lock);
/* Check for duplicate REP. */
@@ -1850,7 +1862,7 @@
cm_id_priv->id.state = IB_CM_REP_RCVD;
cm_id_priv->id.remote_id = rep_msg->local_comm_id;
- cm_id_priv->remote_qpn = cm_rep_get_local_qpn(rep_msg);
+ cm_id_priv->remote_qpn = cm_rep_get_qpn(rep_msg, cm_id_priv->qp_type);
cm_id_priv->initiator_depth = rep_msg->resp_resources;
cm_id_priv->responder_resources = rep_msg->initiator_depth;
cm_id_priv->sq_psn = cm_rep_get_starting_psn(rep_msg);
@@ -3492,7 +3504,8 @@
qp_attr->path_mtu = cm_id_priv->path_mtu;
qp_attr->dest_qp_num = be32_to_cpu(cm_id_priv->remote_qpn);
qp_attr->rq_psn = be32_to_cpu(cm_id_priv->rq_psn);
- if (cm_id_priv->qp_type == IB_QPT_RC) {
+ if (cm_id_priv->qp_type == IB_QPT_RC ||
+ cm_id_priv->qp_type == IB_QPT_XRC_TGT) {
*qp_attr_mask |= IB_QP_MAX_DEST_RD_ATOMIC |
IB_QP_MIN_RNR_TIMER;
qp_attr->max_dest_rd_atomic =
@@ -3537,15 +3550,21 @@
if (cm_id_priv->id.lap_state == IB_CM_LAP_UNINIT) {
*qp_attr_mask = IB_QP_STATE | IB_QP_SQ_PSN;
qp_attr->sq_psn = be32_to_cpu(cm_id_priv->sq_psn);
- if (cm_id_priv->qp_type == IB_QPT_RC) {
- *qp_attr_mask |= IB_QP_TIMEOUT | IB_QP_RETRY_CNT |
- IB_QP_RNR_RETRY |
+ switch (cm_id_priv->qp_type) {
+ case IB_QPT_RC:
+ case IB_QPT_XRC_INI:
+ *qp_attr_mask |= IB_QP_RETRY_CNT | IB_QP_RNR_RETRY |
IB_QP_MAX_QP_RD_ATOMIC;
- qp_attr->timeout = cm_id_priv->av.timeout;
qp_attr->retry_cnt = cm_id_priv->retry_count;
qp_attr->rnr_retry = cm_id_priv->rnr_retry_count;
- qp_attr->max_rd_atomic =
- cm_id_priv->initiator_depth;
+ qp_attr->max_rd_atomic = cm_id_priv->initiator_depth;
+ /* fall through */
+ case IB_QPT_XRC_TGT:
+ *qp_attr_mask |= IB_QP_TIMEOUT;
+ qp_attr->timeout = cm_id_priv->av.timeout;
+ break;
+ default:
+ break;
}
if (cm_id_priv->alt_av.ah_attr.dlid) {
*qp_attr_mask |= IB_QP_PATH_MIG_STATE;
diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h
index 7e63c08..505db2a 100644
--- a/drivers/infiniband/core/cm_msgs.h
+++ b/drivers/infiniband/core/cm_msgs.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2004 Intel Corporation. All rights reserved.
+ * Copyright (c) 2004, 2011 Intel Corporation. All rights reserved.
* Copyright (c) 2004 Topspin Corporation. All rights reserved.
* Copyright (c) 2004 Voltaire Corporation. All rights reserved.
*
@@ -86,7 +86,7 @@
__be16 pkey;
/* path MTU:4, RDC exists:1, RNR retry count:3. */
u8 offset50;
- /* max CM Retries:4, SRQ:1, rsvd:3 */
+ /* max CM Retries:4, SRQ:1, extended transport type:3 */
u8 offset51;
__be16 primary_local_lid;
@@ -175,6 +175,11 @@
switch(transport_type) {
case 0: return IB_QPT_RC;
case 1: return IB_QPT_UC;
+ case 3:
+ switch (req_msg->offset51 & 0x7) {
+ case 1: return IB_QPT_XRC_TGT;
+ default: return 0;
+ }
default: return 0;
}
}
@@ -188,6 +193,12 @@
req_msg->offset40) &
0xFFFFFFF9) | 0x2);
break;
+ case IB_QPT_XRC_INI:
+ req_msg->offset40 = cpu_to_be32((be32_to_cpu(
+ req_msg->offset40) &
+ 0xFFFFFFF9) | 0x6);
+ req_msg->offset51 = (req_msg->offset51 & 0xF8) | 1;
+ break;
default:
req_msg->offset40 = cpu_to_be32(be32_to_cpu(
req_msg->offset40) &
@@ -527,6 +538,23 @@
(be32_to_cpu(rep_msg->offset12) & 0x000000FF));
}
+static inline __be32 cm_rep_get_local_eecn(struct cm_rep_msg *rep_msg)
+{
+ return cpu_to_be32(be32_to_cpu(rep_msg->offset16) >> 8);
+}
+
+static inline void cm_rep_set_local_eecn(struct cm_rep_msg *rep_msg, __be32 eecn)
+{
+ rep_msg->offset16 = cpu_to_be32((be32_to_cpu(eecn) << 8) |
+ (be32_to_cpu(rep_msg->offset16) & 0x000000FF));
+}
+
+static inline __be32 cm_rep_get_qpn(struct cm_rep_msg *rep_msg, enum ib_qp_type qp_type)
+{
+ return (qp_type == IB_QPT_XRC_INI) ?
+ cm_rep_get_local_eecn(rep_msg) : cm_rep_get_local_qpn(rep_msg);
+}
+
static inline __be32 cm_rep_get_starting_psn(struct cm_rep_msg *rep_msg)
{
return cpu_to_be32(be32_to_cpu(rep_msg->offset20) >> 8);
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index ca4c5dc..872b184 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -81,6 +81,7 @@
static DEFINE_IDR(tcp_ps);
static DEFINE_IDR(udp_ps);
static DEFINE_IDR(ipoib_ps);
+static DEFINE_IDR(ib_ps);
struct cma_device {
struct list_head list;
@@ -1179,6 +1180,15 @@
event->param.conn.qp_num = req_data->remote_qpn;
}
+static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event)
+{
+ return (((ib_event->event == IB_CM_REQ_RECEIVED) ||
+ (ib_event->param.req_rcvd.qp_type == id->qp_type)) ||
+ ((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) &&
+ (id->qp_type == IB_QPT_UD)) ||
+ (!id->qp_type));
+}
+
static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
{
struct rdma_id_private *listen_id, *conn_id;
@@ -1186,13 +1196,16 @@
int offset, ret;
listen_id = cm_id->context;
+ if (!cma_check_req_qp_type(&listen_id->id, ib_event))
+ return -EINVAL;
+
if (cma_disable_callback(listen_id, RDMA_CM_LISTEN))
return -ECONNABORTED;
memset(&event, 0, sizeof event);
offset = cma_user_data_offset(listen_id->id.ps);
event.event = RDMA_CM_EVENT_CONNECT_REQUEST;
- if (listen_id->id.qp_type == IB_QPT_UD) {
+ if (ib_event->event == IB_CM_SIDR_REQ_RECEIVED) {
conn_id = cma_new_udp_id(&listen_id->id, ib_event);
event.param.ud.private_data = ib_event->private_data + offset;
event.param.ud.private_data_len =
@@ -1328,6 +1341,8 @@
switch (iw_event->status) {
case 0:
event.event = RDMA_CM_EVENT_ESTABLISHED;
+ event.param.conn.initiator_depth = iw_event->ird;
+ event.param.conn.responder_resources = iw_event->ord;
break;
case -ECONNRESET:
case -ECONNREFUSED:
@@ -1343,6 +1358,8 @@
break;
case IW_CM_EVENT_ESTABLISHED:
event.event = RDMA_CM_EVENT_ESTABLISHED;
+ event.param.conn.initiator_depth = iw_event->ird;
+ event.param.conn.responder_resources = iw_event->ord;
break;
default:
BUG_ON(1);
@@ -1433,8 +1450,8 @@
event.event = RDMA_CM_EVENT_CONNECT_REQUEST;
event.param.conn.private_data = iw_event->private_data;
event.param.conn.private_data_len = iw_event->private_data_len;
- event.param.conn.initiator_depth = attr.max_qp_init_rd_atom;
- event.param.conn.responder_resources = attr.max_qp_rd_atom;
+ event.param.conn.initiator_depth = iw_event->ird;
+ event.param.conn.responder_resources = iw_event->ord;
/*
* Protect against the user destroying conn_id from another thread
@@ -2234,6 +2251,9 @@
case RDMA_PS_IPOIB:
ps = &ipoib_ps;
break;
+ case RDMA_PS_IB:
+ ps = &ib_ps;
+ break;
default:
return -EPROTONOSUPPORT;
}
@@ -2569,7 +2589,7 @@
req.service_id = cma_get_service_id(id_priv->id.ps,
(struct sockaddr *) &route->addr.dst_addr);
req.qp_num = id_priv->qp_num;
- req.qp_type = IB_QPT_RC;
+ req.qp_type = id_priv->id.qp_type;
req.starting_psn = id_priv->seq_num;
req.responder_resources = conn_param->responder_resources;
req.initiator_depth = conn_param->initiator_depth;
@@ -2616,14 +2636,16 @@
if (ret)
goto out;
- iw_param.ord = conn_param->initiator_depth;
- iw_param.ird = conn_param->responder_resources;
- iw_param.private_data = conn_param->private_data;
- iw_param.private_data_len = conn_param->private_data_len;
- if (id_priv->id.qp)
+ if (conn_param) {
+ iw_param.ord = conn_param->initiator_depth;
+ iw_param.ird = conn_param->responder_resources;
+ iw_param.private_data = conn_param->private_data;
+ iw_param.private_data_len = conn_param->private_data_len;
+ iw_param.qpn = id_priv->id.qp ? id_priv->qp_num : conn_param->qp_num;
+ } else {
+ memset(&iw_param, 0, sizeof iw_param);
iw_param.qpn = id_priv->qp_num;
- else
- iw_param.qpn = conn_param->qp_num;
+ }
ret = iw_cm_connect(cm_id, &iw_param);
out:
if (ret) {
@@ -2765,14 +2787,20 @@
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- if (id->qp_type == IB_QPT_UD)
- ret = cma_send_sidr_rep(id_priv, IB_SIDR_SUCCESS,
- conn_param->private_data,
- conn_param->private_data_len);
- else if (conn_param)
- ret = cma_accept_ib(id_priv, conn_param);
- else
- ret = cma_rep_recv(id_priv);
+ if (id->qp_type == IB_QPT_UD) {
+ if (conn_param)
+ ret = cma_send_sidr_rep(id_priv, IB_SIDR_SUCCESS,
+ conn_param->private_data,
+ conn_param->private_data_len);
+ else
+ ret = cma_send_sidr_rep(id_priv, IB_SIDR_SUCCESS,
+ NULL, 0);
+ } else {
+ if (conn_param)
+ ret = cma_accept_ib(id_priv, conn_param);
+ else
+ ret = cma_rep_recv(id_priv);
+ }
break;
case RDMA_TRANSPORT_IWARP:
ret = cma_accept_iw(id_priv, conn_param);
@@ -3460,6 +3488,7 @@
idr_destroy(&tcp_ps);
idr_destroy(&udp_ps);
idr_destroy(&ipoib_ps);
+ idr_destroy(&ib_ps);
}
module_init(cma_init);
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index b4d8672..0563892 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -1596,6 +1596,9 @@
mad->mad_hdr.class_version].class;
if (!class)
goto out;
+ if (convert_mgmt_class(mad->mad_hdr.mgmt_class) >=
+ IB_MGMT_MAX_METHODS)
+ goto out;
method = class->method_table[convert_mgmt_class(
mad->mad_hdr.mgmt_class)];
if (method)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 9ab5df7..2b59b72b 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -185,17 +185,35 @@
if (ret)
return ret;
+ rate = (25 * attr.active_speed) / 10;
+
switch (attr.active_speed) {
- case 2: speed = " DDR"; break;
- case 4: speed = " QDR"; break;
+ case 2:
+ speed = " DDR";
+ break;
+ case 4:
+ speed = " QDR";
+ break;
+ case 8:
+ speed = " FDR10";
+ rate = 10;
+ break;
+ case 16:
+ speed = " FDR";
+ rate = 14;
+ break;
+ case 32:
+ speed = " EDR";
+ rate = 25;
+ break;
}
- rate = 25 * ib_width_enum_to_int(attr.active_width) * attr.active_speed;
+ rate *= ib_width_enum_to_int(attr.active_width);
if (rate < 0)
return -EINVAL;
return sprintf(buf, "%d%s Gb/sec (%dX%s)\n",
- rate / 10, rate % 10 ? ".5" : "",
+ rate, (attr.active_speed == 1) ? ".5" : "",
ib_width_enum_to_int(attr.active_width), speed);
}
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 08f948d..b8a0b4a 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1122,7 +1122,7 @@
if (copy_from_user(&hdr, buf, sizeof(hdr)))
return -EFAULT;
- if (hdr.cmd < 0 || hdr.cmd >= ARRAY_SIZE(ucm_cmd_table))
+ if (hdr.cmd >= ARRAY_SIZE(ucm_cmd_table))
return -EINVAL;
if (hdr.in + sizeof(hdr) > len)
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 71be5ee..b69307f 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -276,7 +276,7 @@
ucma_set_event_context(ctx, event, uevent);
uevent->resp.event = event->event;
uevent->resp.status = event->status;
- if (cm_id->ps == RDMA_PS_UDP || cm_id->ps == RDMA_PS_IPOIB)
+ if (cm_id->qp_type == IB_QPT_UD)
ucma_copy_ud_event(&uevent->resp.param.ud, &event->param.ud);
else
ucma_copy_conn_event(&uevent->resp.param.conn,
@@ -377,6 +377,9 @@
case RDMA_PS_IPOIB:
*qp_type = IB_QPT_UD;
return 0;
+ case RDMA_PS_IB:
+ *qp_type = cmd->qp_type;
+ return 0;
default:
return -EINVAL;
}
@@ -1270,7 +1273,7 @@
if (copy_from_user(&hdr, buf, sizeof(hdr)))
return -EFAULT;
- if (hdr.cmd < 0 || hdr.cmd >= ARRAY_SIZE(ucma_cmd_table))
+ if (hdr.cmd >= ARRAY_SIZE(ucma_cmd_table))
return -EINVAL;
if (hdr.in + sizeof(hdr) > len)
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index b645e55..9155f91 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -136,7 +136,7 @@
down_write(¤t->mm->mmap_sem);
- locked = npages + current->mm->locked_vm;
+ locked = npages + current->mm->pinned_vm;
lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
if ((locked > lock_limit) && !capable(CAP_IPC_LOCK)) {
@@ -206,7 +206,7 @@
__ib_umem_release(context->device, umem, 0);
kfree(umem);
} else
- current->mm->locked_vm = locked;
+ current->mm->pinned_vm = locked;
up_write(¤t->mm->mmap_sem);
if (vma_list)
@@ -222,7 +222,7 @@
struct ib_umem *umem = container_of(work, struct ib_umem, work);
down_write(&umem->mm->mmap_sem);
- umem->mm->locked_vm -= umem->diff;
+ umem->mm->pinned_vm -= umem->diff;
up_write(&umem->mm->mmap_sem);
mmput(umem->mm);
kfree(umem);
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 8d261b6..07db229 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -458,8 +458,7 @@
goto err;
}
- if (packet->mad.hdr.id < 0 ||
- packet->mad.hdr.id >= IB_UMAD_MAX_AGENTS) {
+ if (packet->mad.hdr.id >= IB_UMAD_MAX_AGENTS) {
ret = -EINVAL;
goto err;
}
@@ -703,7 +702,7 @@
mutex_lock(&file->port->file_mutex);
mutex_lock(&file->mutex);
- if (id < 0 || id >= IB_UMAD_MAX_AGENTS || !__get_agent(file, id)) {
+ if (id >= IB_UMAD_MAX_AGENTS || !__get_agent(file, id)) {
ret = -EINVAL;
goto out;
}
diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h
index a078e56..5bcb2af 100644
--- a/drivers/infiniband/core/uverbs.h
+++ b/drivers/infiniband/core/uverbs.h
@@ -76,6 +76,8 @@
struct ib_device *ib_dev;
int devnum;
struct cdev cdev;
+ struct rb_root xrcd_tree;
+ struct mutex xrcd_tree_mutex;
};
struct ib_uverbs_event_file {
@@ -120,6 +122,16 @@
u32 events_reported;
};
+struct ib_uxrcd_object {
+ struct ib_uobject uobject;
+ atomic_t refcnt;
+};
+
+struct ib_usrq_object {
+ struct ib_uevent_object uevent;
+ struct ib_uxrcd_object *uxrcd;
+};
+
struct ib_uqp_object {
struct ib_uevent_object uevent;
struct list_head mcast_list;
@@ -142,6 +154,7 @@
extern struct idr ib_uverbs_cq_idr;
extern struct idr ib_uverbs_qp_idr;
extern struct idr ib_uverbs_srq_idr;
+extern struct idr ib_uverbs_xrcd_idr;
void idr_remove_uobj(struct idr *idp, struct ib_uobject *uobj);
@@ -161,6 +174,7 @@
void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr);
void ib_uverbs_event_handler(struct ib_event_handler *handler,
struct ib_event *event);
+void ib_uverbs_dealloc_xrcd(struct ib_uverbs_device *dev, struct ib_xrcd *xrcd);
#define IB_UVERBS_DECLARE_CMD(name) \
ssize_t ib_uverbs_##name(struct ib_uverbs_file *file, \
@@ -181,6 +195,7 @@
IB_UVERBS_DECLARE_CMD(req_notify_cq);
IB_UVERBS_DECLARE_CMD(destroy_cq);
IB_UVERBS_DECLARE_CMD(create_qp);
+IB_UVERBS_DECLARE_CMD(open_qp);
IB_UVERBS_DECLARE_CMD(query_qp);
IB_UVERBS_DECLARE_CMD(modify_qp);
IB_UVERBS_DECLARE_CMD(destroy_qp);
@@ -195,5 +210,8 @@
IB_UVERBS_DECLARE_CMD(modify_srq);
IB_UVERBS_DECLARE_CMD(query_srq);
IB_UVERBS_DECLARE_CMD(destroy_srq);
+IB_UVERBS_DECLARE_CMD(create_xsrq);
+IB_UVERBS_DECLARE_CMD(open_xrcd);
+IB_UVERBS_DECLARE_CMD(close_xrcd);
#endif /* UVERBS_H */
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index c426992..254f164 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -47,6 +47,7 @@
static struct lock_class_key qp_lock_key;
static struct lock_class_key ah_lock_key;
static struct lock_class_key srq_lock_key;
+static struct lock_class_key xrcd_lock_key;
#define INIT_UDATA(udata, ibuf, obuf, ilen, olen) \
do { \
@@ -255,6 +256,18 @@
put_uobj_read(srq->uobject);
}
+static struct ib_xrcd *idr_read_xrcd(int xrcd_handle, struct ib_ucontext *context,
+ struct ib_uobject **uobj)
+{
+ *uobj = idr_read_uobj(&ib_uverbs_xrcd_idr, xrcd_handle, context, 0);
+ return *uobj ? (*uobj)->object : NULL;
+}
+
+static void put_xrcd_read(struct ib_uobject *uobj)
+{
+ put_uobj_read(uobj);
+}
+
ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
@@ -298,6 +311,7 @@
INIT_LIST_HEAD(&ucontext->qp_list);
INIT_LIST_HEAD(&ucontext->srq_list);
INIT_LIST_HEAD(&ucontext->ah_list);
+ INIT_LIST_HEAD(&ucontext->xrcd_list);
ucontext->closing = 0;
resp.num_comp_vectors = file->device->num_comp_vectors;
@@ -579,6 +593,310 @@
return in_len;
}
+struct xrcd_table_entry {
+ struct rb_node node;
+ struct ib_xrcd *xrcd;
+ struct inode *inode;
+};
+
+static int xrcd_table_insert(struct ib_uverbs_device *dev,
+ struct inode *inode,
+ struct ib_xrcd *xrcd)
+{
+ struct xrcd_table_entry *entry, *scan;
+ struct rb_node **p = &dev->xrcd_tree.rb_node;
+ struct rb_node *parent = NULL;
+
+ entry = kmalloc(sizeof *entry, GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->xrcd = xrcd;
+ entry->inode = inode;
+
+ while (*p) {
+ parent = *p;
+ scan = rb_entry(parent, struct xrcd_table_entry, node);
+
+ if (inode < scan->inode) {
+ p = &(*p)->rb_left;
+ } else if (inode > scan->inode) {
+ p = &(*p)->rb_right;
+ } else {
+ kfree(entry);
+ return -EEXIST;
+ }
+ }
+
+ rb_link_node(&entry->node, parent, p);
+ rb_insert_color(&entry->node, &dev->xrcd_tree);
+ igrab(inode);
+ return 0;
+}
+
+static struct xrcd_table_entry *xrcd_table_search(struct ib_uverbs_device *dev,
+ struct inode *inode)
+{
+ struct xrcd_table_entry *entry;
+ struct rb_node *p = dev->xrcd_tree.rb_node;
+
+ while (p) {
+ entry = rb_entry(p, struct xrcd_table_entry, node);
+
+ if (inode < entry->inode)
+ p = p->rb_left;
+ else if (inode > entry->inode)
+ p = p->rb_right;
+ else
+ return entry;
+ }
+
+ return NULL;
+}
+
+static struct ib_xrcd *find_xrcd(struct ib_uverbs_device *dev, struct inode *inode)
+{
+ struct xrcd_table_entry *entry;
+
+ entry = xrcd_table_search(dev, inode);
+ if (!entry)
+ return NULL;
+
+ return entry->xrcd;
+}
+
+static void xrcd_table_delete(struct ib_uverbs_device *dev,
+ struct inode *inode)
+{
+ struct xrcd_table_entry *entry;
+
+ entry = xrcd_table_search(dev, inode);
+ if (entry) {
+ iput(inode);
+ rb_erase(&entry->node, &dev->xrcd_tree);
+ kfree(entry);
+ }
+}
+
+ssize_t ib_uverbs_open_xrcd(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_open_xrcd cmd;
+ struct ib_uverbs_open_xrcd_resp resp;
+ struct ib_udata udata;
+ struct ib_uxrcd_object *obj;
+ struct ib_xrcd *xrcd = NULL;
+ struct file *f = NULL;
+ struct inode *inode = NULL;
+ int ret = 0;
+ int new_xrcd = 0;
+
+ if (out_len < sizeof resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ INIT_UDATA(&udata, buf + sizeof cmd,
+ (unsigned long) cmd.response + sizeof resp,
+ in_len - sizeof cmd, out_len - sizeof resp);
+
+ mutex_lock(&file->device->xrcd_tree_mutex);
+
+ if (cmd.fd != -1) {
+ /* search for file descriptor */
+ f = fget(cmd.fd);
+ if (!f) {
+ ret = -EBADF;
+ goto err_tree_mutex_unlock;
+ }
+
+ inode = f->f_dentry->d_inode;
+ if (!inode) {
+ ret = -EBADF;
+ goto err_tree_mutex_unlock;
+ }
+
+ xrcd = find_xrcd(file->device, inode);
+ if (!xrcd && !(cmd.oflags & O_CREAT)) {
+ /* no file descriptor. Need CREATE flag */
+ ret = -EAGAIN;
+ goto err_tree_mutex_unlock;
+ }
+
+ if (xrcd && cmd.oflags & O_EXCL) {
+ ret = -EINVAL;
+ goto err_tree_mutex_unlock;
+ }
+ }
+
+ obj = kmalloc(sizeof *obj, GFP_KERNEL);
+ if (!obj) {
+ ret = -ENOMEM;
+ goto err_tree_mutex_unlock;
+ }
+
+ init_uobj(&obj->uobject, 0, file->ucontext, &xrcd_lock_key);
+
+ down_write(&obj->uobject.mutex);
+
+ if (!xrcd) {
+ xrcd = file->device->ib_dev->alloc_xrcd(file->device->ib_dev,
+ file->ucontext, &udata);
+ if (IS_ERR(xrcd)) {
+ ret = PTR_ERR(xrcd);
+ goto err;
+ }
+
+ xrcd->inode = inode;
+ xrcd->device = file->device->ib_dev;
+ atomic_set(&xrcd->usecnt, 0);
+ mutex_init(&xrcd->tgt_qp_mutex);
+ INIT_LIST_HEAD(&xrcd->tgt_qp_list);
+ new_xrcd = 1;
+ }
+
+ atomic_set(&obj->refcnt, 0);
+ obj->uobject.object = xrcd;
+ ret = idr_add_uobj(&ib_uverbs_xrcd_idr, &obj->uobject);
+ if (ret)
+ goto err_idr;
+
+ memset(&resp, 0, sizeof resp);
+ resp.xrcd_handle = obj->uobject.id;
+
+ if (inode) {
+ if (new_xrcd) {
+ /* create new inode/xrcd table entry */
+ ret = xrcd_table_insert(file->device, inode, xrcd);
+ if (ret)
+ goto err_insert_xrcd;
+ }
+ atomic_inc(&xrcd->usecnt);
+ }
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp)) {
+ ret = -EFAULT;
+ goto err_copy;
+ }
+
+ if (f)
+ fput(f);
+
+ mutex_lock(&file->mutex);
+ list_add_tail(&obj->uobject.list, &file->ucontext->xrcd_list);
+ mutex_unlock(&file->mutex);
+
+ obj->uobject.live = 1;
+ up_write(&obj->uobject.mutex);
+
+ mutex_unlock(&file->device->xrcd_tree_mutex);
+ return in_len;
+
+err_copy:
+ if (inode) {
+ if (new_xrcd)
+ xrcd_table_delete(file->device, inode);
+ atomic_dec(&xrcd->usecnt);
+ }
+
+err_insert_xrcd:
+ idr_remove_uobj(&ib_uverbs_xrcd_idr, &obj->uobject);
+
+err_idr:
+ ib_dealloc_xrcd(xrcd);
+
+err:
+ put_uobj_write(&obj->uobject);
+
+err_tree_mutex_unlock:
+ if (f)
+ fput(f);
+
+ mutex_unlock(&file->device->xrcd_tree_mutex);
+
+ return ret;
+}
+
+ssize_t ib_uverbs_close_xrcd(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_close_xrcd cmd;
+ struct ib_uobject *uobj;
+ struct ib_xrcd *xrcd = NULL;
+ struct inode *inode = NULL;
+ struct ib_uxrcd_object *obj;
+ int live;
+ int ret = 0;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ mutex_lock(&file->device->xrcd_tree_mutex);
+ uobj = idr_write_uobj(&ib_uverbs_xrcd_idr, cmd.xrcd_handle, file->ucontext);
+ if (!uobj) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ xrcd = uobj->object;
+ inode = xrcd->inode;
+ obj = container_of(uobj, struct ib_uxrcd_object, uobject);
+ if (atomic_read(&obj->refcnt)) {
+ put_uobj_write(uobj);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (!inode || atomic_dec_and_test(&xrcd->usecnt)) {
+ ret = ib_dealloc_xrcd(uobj->object);
+ if (!ret)
+ uobj->live = 0;
+ }
+
+ live = uobj->live;
+ if (inode && ret)
+ atomic_inc(&xrcd->usecnt);
+
+ put_uobj_write(uobj);
+
+ if (ret)
+ goto out;
+
+ if (inode && !live)
+ xrcd_table_delete(file->device, inode);
+
+ idr_remove_uobj(&ib_uverbs_xrcd_idr, uobj);
+ mutex_lock(&file->mutex);
+ list_del(&uobj->list);
+ mutex_unlock(&file->mutex);
+
+ put_uobj(uobj);
+ ret = in_len;
+
+out:
+ mutex_unlock(&file->device->xrcd_tree_mutex);
+ return ret;
+}
+
+void ib_uverbs_dealloc_xrcd(struct ib_uverbs_device *dev,
+ struct ib_xrcd *xrcd)
+{
+ struct inode *inode;
+
+ inode = xrcd->inode;
+ if (inode && !atomic_dec_and_test(&xrcd->usecnt))
+ return;
+
+ ib_dealloc_xrcd(xrcd);
+
+ if (inode)
+ xrcd_table_delete(dev, inode);
+}
+
ssize_t ib_uverbs_reg_mr(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -1052,9 +1370,12 @@
struct ib_uverbs_create_qp_resp resp;
struct ib_udata udata;
struct ib_uqp_object *obj;
- struct ib_pd *pd;
- struct ib_cq *scq, *rcq;
- struct ib_srq *srq;
+ struct ib_device *device;
+ struct ib_pd *pd = NULL;
+ struct ib_xrcd *xrcd = NULL;
+ struct ib_uobject *uninitialized_var(xrcd_uobj);
+ struct ib_cq *scq = NULL, *rcq = NULL;
+ struct ib_srq *srq = NULL;
struct ib_qp *qp;
struct ib_qp_init_attr attr;
int ret;
@@ -1076,15 +1397,39 @@
init_uobj(&obj->uevent.uobject, cmd.user_handle, file->ucontext, &qp_lock_key);
down_write(&obj->uevent.uobject.mutex);
- srq = cmd.is_srq ? idr_read_srq(cmd.srq_handle, file->ucontext) : NULL;
- pd = idr_read_pd(cmd.pd_handle, file->ucontext);
- scq = idr_read_cq(cmd.send_cq_handle, file->ucontext, 0);
- rcq = cmd.recv_cq_handle == cmd.send_cq_handle ?
- scq : idr_read_cq(cmd.recv_cq_handle, file->ucontext, 1);
+ if (cmd.qp_type == IB_QPT_XRC_TGT) {
+ xrcd = idr_read_xrcd(cmd.pd_handle, file->ucontext, &xrcd_uobj);
+ if (!xrcd) {
+ ret = -EINVAL;
+ goto err_put;
+ }
+ device = xrcd->device;
+ } else {
+ pd = idr_read_pd(cmd.pd_handle, file->ucontext);
+ scq = idr_read_cq(cmd.send_cq_handle, file->ucontext, 0);
+ if (!pd || !scq) {
+ ret = -EINVAL;
+ goto err_put;
+ }
- if (!pd || !scq || !rcq || (cmd.is_srq && !srq)) {
- ret = -EINVAL;
- goto err_put;
+ if (cmd.qp_type == IB_QPT_XRC_INI) {
+ cmd.max_recv_wr = cmd.max_recv_sge = 0;
+ } else {
+ if (cmd.is_srq) {
+ srq = idr_read_srq(cmd.srq_handle, file->ucontext);
+ if (!srq || srq->srq_type != IB_SRQT_BASIC) {
+ ret = -EINVAL;
+ goto err_put;
+ }
+ }
+ rcq = (cmd.recv_cq_handle == cmd.send_cq_handle) ?
+ scq : idr_read_cq(cmd.recv_cq_handle, file->ucontext, 1);
+ if (!rcq) {
+ ret = -EINVAL;
+ goto err_put;
+ }
+ }
+ device = pd->device;
}
attr.event_handler = ib_uverbs_qp_event_handler;
@@ -1092,6 +1437,7 @@
attr.send_cq = scq;
attr.recv_cq = rcq;
attr.srq = srq;
+ attr.xrcd = xrcd;
attr.sq_sig_type = cmd.sq_sig_all ? IB_SIGNAL_ALL_WR : IB_SIGNAL_REQ_WR;
attr.qp_type = cmd.qp_type;
attr.create_flags = 0;
@@ -1106,26 +1452,34 @@
INIT_LIST_HEAD(&obj->uevent.event_list);
INIT_LIST_HEAD(&obj->mcast_list);
- qp = pd->device->create_qp(pd, &attr, &udata);
+ if (cmd.qp_type == IB_QPT_XRC_TGT)
+ qp = ib_create_qp(pd, &attr);
+ else
+ qp = device->create_qp(pd, &attr, &udata);
+
if (IS_ERR(qp)) {
ret = PTR_ERR(qp);
goto err_put;
}
- qp->device = pd->device;
- qp->pd = pd;
- qp->send_cq = attr.send_cq;
- qp->recv_cq = attr.recv_cq;
- qp->srq = attr.srq;
- qp->uobject = &obj->uevent.uobject;
- qp->event_handler = attr.event_handler;
- qp->qp_context = attr.qp_context;
- qp->qp_type = attr.qp_type;
- atomic_inc(&pd->usecnt);
- atomic_inc(&attr.send_cq->usecnt);
- atomic_inc(&attr.recv_cq->usecnt);
- if (attr.srq)
- atomic_inc(&attr.srq->usecnt);
+ if (cmd.qp_type != IB_QPT_XRC_TGT) {
+ qp->real_qp = qp;
+ qp->device = device;
+ qp->pd = pd;
+ qp->send_cq = attr.send_cq;
+ qp->recv_cq = attr.recv_cq;
+ qp->srq = attr.srq;
+ qp->event_handler = attr.event_handler;
+ qp->qp_context = attr.qp_context;
+ qp->qp_type = attr.qp_type;
+ atomic_inc(&pd->usecnt);
+ atomic_inc(&attr.send_cq->usecnt);
+ if (attr.recv_cq)
+ atomic_inc(&attr.recv_cq->usecnt);
+ if (attr.srq)
+ atomic_inc(&attr.srq->usecnt);
+ }
+ qp->uobject = &obj->uevent.uobject;
obj->uevent.uobject.object = qp;
ret = idr_add_uobj(&ib_uverbs_qp_idr, &obj->uevent.uobject);
@@ -1147,9 +1501,13 @@
goto err_copy;
}
- put_pd_read(pd);
- put_cq_read(scq);
- if (rcq != scq)
+ if (xrcd)
+ put_xrcd_read(xrcd_uobj);
+ if (pd)
+ put_pd_read(pd);
+ if (scq)
+ put_cq_read(scq);
+ if (rcq && rcq != scq)
put_cq_read(rcq);
if (srq)
put_srq_read(srq);
@@ -1171,6 +1529,8 @@
ib_destroy_qp(qp);
err_put:
+ if (xrcd)
+ put_xrcd_read(xrcd_uobj);
if (pd)
put_pd_read(pd);
if (scq)
@@ -1184,6 +1544,98 @@
return ret;
}
+ssize_t ib_uverbs_open_qp(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len, int out_len)
+{
+ struct ib_uverbs_open_qp cmd;
+ struct ib_uverbs_create_qp_resp resp;
+ struct ib_udata udata;
+ struct ib_uqp_object *obj;
+ struct ib_xrcd *xrcd;
+ struct ib_uobject *uninitialized_var(xrcd_uobj);
+ struct ib_qp *qp;
+ struct ib_qp_open_attr attr;
+ int ret;
+
+ if (out_len < sizeof resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ INIT_UDATA(&udata, buf + sizeof cmd,
+ (unsigned long) cmd.response + sizeof resp,
+ in_len - sizeof cmd, out_len - sizeof resp);
+
+ obj = kmalloc(sizeof *obj, GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ init_uobj(&obj->uevent.uobject, cmd.user_handle, file->ucontext, &qp_lock_key);
+ down_write(&obj->uevent.uobject.mutex);
+
+ xrcd = idr_read_xrcd(cmd.pd_handle, file->ucontext, &xrcd_uobj);
+ if (!xrcd) {
+ ret = -EINVAL;
+ goto err_put;
+ }
+
+ attr.event_handler = ib_uverbs_qp_event_handler;
+ attr.qp_context = file;
+ attr.qp_num = cmd.qpn;
+ attr.qp_type = cmd.qp_type;
+
+ obj->uevent.events_reported = 0;
+ INIT_LIST_HEAD(&obj->uevent.event_list);
+ INIT_LIST_HEAD(&obj->mcast_list);
+
+ qp = ib_open_qp(xrcd, &attr);
+ if (IS_ERR(qp)) {
+ ret = PTR_ERR(qp);
+ goto err_put;
+ }
+
+ qp->uobject = &obj->uevent.uobject;
+
+ obj->uevent.uobject.object = qp;
+ ret = idr_add_uobj(&ib_uverbs_qp_idr, &obj->uevent.uobject);
+ if (ret)
+ goto err_destroy;
+
+ memset(&resp, 0, sizeof resp);
+ resp.qpn = qp->qp_num;
+ resp.qp_handle = obj->uevent.uobject.id;
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp)) {
+ ret = -EFAULT;
+ goto err_remove;
+ }
+
+ put_xrcd_read(xrcd_uobj);
+
+ mutex_lock(&file->mutex);
+ list_add_tail(&obj->uevent.uobject.list, &file->ucontext->qp_list);
+ mutex_unlock(&file->mutex);
+
+ obj->uevent.uobject.live = 1;
+
+ up_write(&obj->uevent.uobject.mutex);
+
+ return in_len;
+
+err_remove:
+ idr_remove_uobj(&ib_uverbs_qp_idr, &obj->uevent.uobject);
+
+err_destroy:
+ ib_destroy_qp(qp);
+
+err_put:
+ put_xrcd_read(xrcd_uobj);
+ put_uobj_write(&obj->uevent.uobject);
+ return ret;
+}
+
ssize_t ib_uverbs_query_qp(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -1284,6 +1736,20 @@
return ret ? ret : in_len;
}
+/* Remove ignored fields set in the attribute mask */
+static int modify_qp_mask(enum ib_qp_type qp_type, int mask)
+{
+ switch (qp_type) {
+ case IB_QPT_XRC_INI:
+ return mask & ~(IB_QP_MAX_DEST_RD_ATOMIC | IB_QP_MIN_RNR_TIMER);
+ case IB_QPT_XRC_TGT:
+ return mask & ~(IB_QP_MAX_QP_RD_ATOMIC | IB_QP_RETRY_CNT |
+ IB_QP_RNR_RETRY);
+ default:
+ return mask;
+ }
+}
+
ssize_t ib_uverbs_modify_qp(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -1356,7 +1822,12 @@
attr->alt_ah_attr.ah_flags = cmd.alt_dest.is_global ? IB_AH_GRH : 0;
attr->alt_ah_attr.port_num = cmd.alt_dest.port_num;
- ret = qp->device->modify_qp(qp, attr, cmd.attr_mask, &udata);
+ if (qp->real_qp == qp) {
+ ret = qp->device->modify_qp(qp, attr,
+ modify_qp_mask(qp->qp_type, cmd.attr_mask), &udata);
+ } else {
+ ret = ib_modify_qp(qp, attr, modify_qp_mask(qp->qp_type, cmd.attr_mask));
+ }
put_qp_read(qp);
@@ -1553,7 +2024,7 @@
}
resp.bad_wr = 0;
- ret = qp->device->post_send(qp, wr, &bad_wr);
+ ret = qp->device->post_send(qp->real_qp, wr, &bad_wr);
if (ret)
for (next = wr; next; next = next->next) {
++resp.bad_wr;
@@ -1691,7 +2162,7 @@
goto out;
resp.bad_wr = 0;
- ret = qp->device->post_recv(qp, wr, &bad_wr);
+ ret = qp->device->post_recv(qp->real_qp, wr, &bad_wr);
put_qp_read(qp);
@@ -1975,17 +2446,180 @@
return ret ? ret : in_len;
}
+int __uverbs_create_xsrq(struct ib_uverbs_file *file,
+ struct ib_uverbs_create_xsrq *cmd,
+ struct ib_udata *udata)
+{
+ struct ib_uverbs_create_srq_resp resp;
+ struct ib_usrq_object *obj;
+ struct ib_pd *pd;
+ struct ib_srq *srq;
+ struct ib_uobject *uninitialized_var(xrcd_uobj);
+ struct ib_srq_init_attr attr;
+ int ret;
+
+ obj = kmalloc(sizeof *obj, GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ init_uobj(&obj->uevent.uobject, cmd->user_handle, file->ucontext, &srq_lock_key);
+ down_write(&obj->uevent.uobject.mutex);
+
+ pd = idr_read_pd(cmd->pd_handle, file->ucontext);
+ if (!pd) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (cmd->srq_type == IB_SRQT_XRC) {
+ attr.ext.xrc.cq = idr_read_cq(cmd->cq_handle, file->ucontext, 0);
+ if (!attr.ext.xrc.cq) {
+ ret = -EINVAL;
+ goto err_put_pd;
+ }
+
+ attr.ext.xrc.xrcd = idr_read_xrcd(cmd->xrcd_handle, file->ucontext, &xrcd_uobj);
+ if (!attr.ext.xrc.xrcd) {
+ ret = -EINVAL;
+ goto err_put_cq;
+ }
+
+ obj->uxrcd = container_of(xrcd_uobj, struct ib_uxrcd_object, uobject);
+ atomic_inc(&obj->uxrcd->refcnt);
+ }
+
+ attr.event_handler = ib_uverbs_srq_event_handler;
+ attr.srq_context = file;
+ attr.srq_type = cmd->srq_type;
+ attr.attr.max_wr = cmd->max_wr;
+ attr.attr.max_sge = cmd->max_sge;
+ attr.attr.srq_limit = cmd->srq_limit;
+
+ obj->uevent.events_reported = 0;
+ INIT_LIST_HEAD(&obj->uevent.event_list);
+
+ srq = pd->device->create_srq(pd, &attr, udata);
+ if (IS_ERR(srq)) {
+ ret = PTR_ERR(srq);
+ goto err_put;
+ }
+
+ srq->device = pd->device;
+ srq->pd = pd;
+ srq->srq_type = cmd->srq_type;
+ srq->uobject = &obj->uevent.uobject;
+ srq->event_handler = attr.event_handler;
+ srq->srq_context = attr.srq_context;
+
+ if (cmd->srq_type == IB_SRQT_XRC) {
+ srq->ext.xrc.cq = attr.ext.xrc.cq;
+ srq->ext.xrc.xrcd = attr.ext.xrc.xrcd;
+ atomic_inc(&attr.ext.xrc.cq->usecnt);
+ atomic_inc(&attr.ext.xrc.xrcd->usecnt);
+ }
+
+ atomic_inc(&pd->usecnt);
+ atomic_set(&srq->usecnt, 0);
+
+ obj->uevent.uobject.object = srq;
+ ret = idr_add_uobj(&ib_uverbs_srq_idr, &obj->uevent.uobject);
+ if (ret)
+ goto err_destroy;
+
+ memset(&resp, 0, sizeof resp);
+ resp.srq_handle = obj->uevent.uobject.id;
+ resp.max_wr = attr.attr.max_wr;
+ resp.max_sge = attr.attr.max_sge;
+ if (cmd->srq_type == IB_SRQT_XRC)
+ resp.srqn = srq->ext.xrc.srq_num;
+
+ if (copy_to_user((void __user *) (unsigned long) cmd->response,
+ &resp, sizeof resp)) {
+ ret = -EFAULT;
+ goto err_copy;
+ }
+
+ if (cmd->srq_type == IB_SRQT_XRC) {
+ put_uobj_read(xrcd_uobj);
+ put_cq_read(attr.ext.xrc.cq);
+ }
+ put_pd_read(pd);
+
+ mutex_lock(&file->mutex);
+ list_add_tail(&obj->uevent.uobject.list, &file->ucontext->srq_list);
+ mutex_unlock(&file->mutex);
+
+ obj->uevent.uobject.live = 1;
+
+ up_write(&obj->uevent.uobject.mutex);
+
+ return 0;
+
+err_copy:
+ idr_remove_uobj(&ib_uverbs_srq_idr, &obj->uevent.uobject);
+
+err_destroy:
+ ib_destroy_srq(srq);
+
+err_put:
+ if (cmd->srq_type == IB_SRQT_XRC) {
+ atomic_dec(&obj->uxrcd->refcnt);
+ put_uobj_read(xrcd_uobj);
+ }
+
+err_put_cq:
+ if (cmd->srq_type == IB_SRQT_XRC)
+ put_cq_read(attr.ext.xrc.cq);
+
+err_put_pd:
+ put_pd_read(pd);
+
+err:
+ put_uobj_write(&obj->uevent.uobject);
+ return ret;
+}
+
ssize_t ib_uverbs_create_srq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_create_srq cmd;
+ struct ib_uverbs_create_xsrq xcmd;
struct ib_uverbs_create_srq_resp resp;
struct ib_udata udata;
- struct ib_uevent_object *obj;
- struct ib_pd *pd;
- struct ib_srq *srq;
- struct ib_srq_init_attr attr;
+ int ret;
+
+ if (out_len < sizeof resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ xcmd.response = cmd.response;
+ xcmd.user_handle = cmd.user_handle;
+ xcmd.srq_type = IB_SRQT_BASIC;
+ xcmd.pd_handle = cmd.pd_handle;
+ xcmd.max_wr = cmd.max_wr;
+ xcmd.max_sge = cmd.max_sge;
+ xcmd.srq_limit = cmd.srq_limit;
+
+ INIT_UDATA(&udata, buf + sizeof cmd,
+ (unsigned long) cmd.response + sizeof resp,
+ in_len - sizeof cmd, out_len - sizeof resp);
+
+ ret = __uverbs_create_xsrq(file, &xcmd, &udata);
+ if (ret)
+ return ret;
+
+ return in_len;
+}
+
+ssize_t ib_uverbs_create_xsrq(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len, int out_len)
+{
+ struct ib_uverbs_create_xsrq cmd;
+ struct ib_uverbs_create_srq_resp resp;
+ struct ib_udata udata;
int ret;
if (out_len < sizeof resp)
@@ -1998,82 +2632,11 @@
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
- obj = kmalloc(sizeof *obj, GFP_KERNEL);
- if (!obj)
- return -ENOMEM;
-
- init_uobj(&obj->uobject, cmd.user_handle, file->ucontext, &srq_lock_key);
- down_write(&obj->uobject.mutex);
-
- pd = idr_read_pd(cmd.pd_handle, file->ucontext);
- if (!pd) {
- ret = -EINVAL;
- goto err;
- }
-
- attr.event_handler = ib_uverbs_srq_event_handler;
- attr.srq_context = file;
- attr.attr.max_wr = cmd.max_wr;
- attr.attr.max_sge = cmd.max_sge;
- attr.attr.srq_limit = cmd.srq_limit;
-
- obj->events_reported = 0;
- INIT_LIST_HEAD(&obj->event_list);
-
- srq = pd->device->create_srq(pd, &attr, &udata);
- if (IS_ERR(srq)) {
- ret = PTR_ERR(srq);
- goto err_put;
- }
-
- srq->device = pd->device;
- srq->pd = pd;
- srq->uobject = &obj->uobject;
- srq->event_handler = attr.event_handler;
- srq->srq_context = attr.srq_context;
- atomic_inc(&pd->usecnt);
- atomic_set(&srq->usecnt, 0);
-
- obj->uobject.object = srq;
- ret = idr_add_uobj(&ib_uverbs_srq_idr, &obj->uobject);
+ ret = __uverbs_create_xsrq(file, &cmd, &udata);
if (ret)
- goto err_destroy;
-
- memset(&resp, 0, sizeof resp);
- resp.srq_handle = obj->uobject.id;
- resp.max_wr = attr.attr.max_wr;
- resp.max_sge = attr.attr.max_sge;
-
- if (copy_to_user((void __user *) (unsigned long) cmd.response,
- &resp, sizeof resp)) {
- ret = -EFAULT;
- goto err_copy;
- }
-
- put_pd_read(pd);
-
- mutex_lock(&file->mutex);
- list_add_tail(&obj->uobject.list, &file->ucontext->srq_list);
- mutex_unlock(&file->mutex);
-
- obj->uobject.live = 1;
-
- up_write(&obj->uobject.mutex);
+ return ret;
return in_len;
-
-err_copy:
- idr_remove_uobj(&ib_uverbs_srq_idr, &obj->uobject);
-
-err_destroy:
- ib_destroy_srq(srq);
-
-err_put:
- put_pd_read(pd);
-
-err:
- put_uobj_write(&obj->uobject);
- return ret;
}
ssize_t ib_uverbs_modify_srq(struct ib_uverbs_file *file,
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 56898b6..8796367 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -72,6 +72,7 @@
DEFINE_IDR(ib_uverbs_cq_idr);
DEFINE_IDR(ib_uverbs_qp_idr);
DEFINE_IDR(ib_uverbs_srq_idr);
+DEFINE_IDR(ib_uverbs_xrcd_idr);
static DEFINE_SPINLOCK(map_lock);
static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES);
@@ -107,6 +108,10 @@
[IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq,
[IB_USER_VERBS_CMD_QUERY_SRQ] = ib_uverbs_query_srq,
[IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq,
+ [IB_USER_VERBS_CMD_OPEN_XRCD] = ib_uverbs_open_xrcd,
+ [IB_USER_VERBS_CMD_CLOSE_XRCD] = ib_uverbs_close_xrcd,
+ [IB_USER_VERBS_CMD_CREATE_XSRQ] = ib_uverbs_create_xsrq,
+ [IB_USER_VERBS_CMD_OPEN_QP] = ib_uverbs_open_qp
};
static void ib_uverbs_add_one(struct ib_device *device);
@@ -202,8 +207,12 @@
container_of(uobj, struct ib_uqp_object, uevent.uobject);
idr_remove_uobj(&ib_uverbs_qp_idr, uobj);
- ib_uverbs_detach_umcast(qp, uqp);
- ib_destroy_qp(qp);
+ if (qp != qp->real_qp) {
+ ib_close_qp(qp);
+ } else {
+ ib_uverbs_detach_umcast(qp, uqp);
+ ib_destroy_qp(qp);
+ }
ib_uverbs_release_uevent(file, &uqp->uevent);
kfree(uqp);
}
@@ -241,6 +250,18 @@
kfree(uobj);
}
+ mutex_lock(&file->device->xrcd_tree_mutex);
+ list_for_each_entry_safe(uobj, tmp, &context->xrcd_list, list) {
+ struct ib_xrcd *xrcd = uobj->object;
+ struct ib_uxrcd_object *uxrcd =
+ container_of(uobj, struct ib_uxrcd_object, uobject);
+
+ idr_remove_uobj(&ib_uverbs_xrcd_idr, uobj);
+ ib_uverbs_dealloc_xrcd(file->device, xrcd);
+ kfree(uxrcd);
+ }
+ mutex_unlock(&file->device->xrcd_tree_mutex);
+
list_for_each_entry_safe(uobj, tmp, &context->pd_list, list) {
struct ib_pd *pd = uobj->object;
@@ -557,8 +578,7 @@
if (hdr.in_words * 4 != count)
return -EINVAL;
- if (hdr.command < 0 ||
- hdr.command >= ARRAY_SIZE(uverbs_cmd_table) ||
+ if (hdr.command >= ARRAY_SIZE(uverbs_cmd_table) ||
!uverbs_cmd_table[hdr.command])
return -EINVAL;
@@ -741,6 +761,8 @@
kref_init(&uverbs_dev->ref);
init_completion(&uverbs_dev->comp);
+ uverbs_dev->xrcd_tree = RB_ROOT;
+ mutex_init(&uverbs_dev->xrcd_tree_mutex);
spin_lock(&map_lock);
devnum = find_first_zero_bit(dev_map, IB_UVERBS_MAX_DEVICES);
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index af7a8b0..4251750 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -39,6 +39,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_cache.h>
@@ -77,6 +78,31 @@
}
EXPORT_SYMBOL(mult_to_ib_rate);
+int ib_rate_to_mbps(enum ib_rate rate)
+{
+ switch (rate) {
+ case IB_RATE_2_5_GBPS: return 2500;
+ case IB_RATE_5_GBPS: return 5000;
+ case IB_RATE_10_GBPS: return 10000;
+ case IB_RATE_20_GBPS: return 20000;
+ case IB_RATE_30_GBPS: return 30000;
+ case IB_RATE_40_GBPS: return 40000;
+ case IB_RATE_60_GBPS: return 60000;
+ case IB_RATE_80_GBPS: return 80000;
+ case IB_RATE_120_GBPS: return 120000;
+ case IB_RATE_14_GBPS: return 14062;
+ case IB_RATE_56_GBPS: return 56250;
+ case IB_RATE_112_GBPS: return 112500;
+ case IB_RATE_168_GBPS: return 168750;
+ case IB_RATE_25_GBPS: return 25781;
+ case IB_RATE_100_GBPS: return 103125;
+ case IB_RATE_200_GBPS: return 206250;
+ case IB_RATE_300_GBPS: return 309375;
+ default: return -1;
+ }
+}
+EXPORT_SYMBOL(ib_rate_to_mbps);
+
enum rdma_transport_type
rdma_node_get_transport(enum rdma_node_type node_type)
{
@@ -250,6 +276,13 @@
srq->uobject = NULL;
srq->event_handler = srq_init_attr->event_handler;
srq->srq_context = srq_init_attr->srq_context;
+ srq->srq_type = srq_init_attr->srq_type;
+ if (srq->srq_type == IB_SRQT_XRC) {
+ srq->ext.xrc.xrcd = srq_init_attr->ext.xrc.xrcd;
+ srq->ext.xrc.cq = srq_init_attr->ext.xrc.cq;
+ atomic_inc(&srq->ext.xrc.xrcd->usecnt);
+ atomic_inc(&srq->ext.xrc.cq->usecnt);
+ }
atomic_inc(&pd->usecnt);
atomic_set(&srq->usecnt, 0);
}
@@ -279,16 +312,29 @@
int ib_destroy_srq(struct ib_srq *srq)
{
struct ib_pd *pd;
+ enum ib_srq_type srq_type;
+ struct ib_xrcd *uninitialized_var(xrcd);
+ struct ib_cq *uninitialized_var(cq);
int ret;
if (atomic_read(&srq->usecnt))
return -EBUSY;
pd = srq->pd;
+ srq_type = srq->srq_type;
+ if (srq_type == IB_SRQT_XRC) {
+ xrcd = srq->ext.xrc.xrcd;
+ cq = srq->ext.xrc.cq;
+ }
ret = srq->device->destroy_srq(srq);
- if (!ret)
+ if (!ret) {
atomic_dec(&pd->usecnt);
+ if (srq_type == IB_SRQT_XRC) {
+ atomic_dec(&xrcd->usecnt);
+ atomic_dec(&cq->usecnt);
+ }
+ }
return ret;
}
@@ -296,28 +342,123 @@
/* Queue pairs */
+static void __ib_shared_qp_event_handler(struct ib_event *event, void *context)
+{
+ struct ib_qp *qp = context;
+
+ list_for_each_entry(event->element.qp, &qp->open_list, open_list)
+ event->element.qp->event_handler(event, event->element.qp->qp_context);
+}
+
+static void __ib_insert_xrcd_qp(struct ib_xrcd *xrcd, struct ib_qp *qp)
+{
+ mutex_lock(&xrcd->tgt_qp_mutex);
+ list_add(&qp->xrcd_list, &xrcd->tgt_qp_list);
+ mutex_unlock(&xrcd->tgt_qp_mutex);
+}
+
+static struct ib_qp *__ib_open_qp(struct ib_qp *real_qp,
+ void (*event_handler)(struct ib_event *, void *),
+ void *qp_context)
+{
+ struct ib_qp *qp;
+ unsigned long flags;
+
+ qp = kzalloc(sizeof *qp, GFP_KERNEL);
+ if (!qp)
+ return ERR_PTR(-ENOMEM);
+
+ qp->real_qp = real_qp;
+ atomic_inc(&real_qp->usecnt);
+ qp->device = real_qp->device;
+ qp->event_handler = event_handler;
+ qp->qp_context = qp_context;
+ qp->qp_num = real_qp->qp_num;
+ qp->qp_type = real_qp->qp_type;
+
+ spin_lock_irqsave(&real_qp->device->event_handler_lock, flags);
+ list_add(&qp->open_list, &real_qp->open_list);
+ spin_unlock_irqrestore(&real_qp->device->event_handler_lock, flags);
+
+ return qp;
+}
+
+struct ib_qp *ib_open_qp(struct ib_xrcd *xrcd,
+ struct ib_qp_open_attr *qp_open_attr)
+{
+ struct ib_qp *qp, *real_qp;
+
+ if (qp_open_attr->qp_type != IB_QPT_XRC_TGT)
+ return ERR_PTR(-EINVAL);
+
+ qp = ERR_PTR(-EINVAL);
+ mutex_lock(&xrcd->tgt_qp_mutex);
+ list_for_each_entry(real_qp, &xrcd->tgt_qp_list, xrcd_list) {
+ if (real_qp->qp_num == qp_open_attr->qp_num) {
+ qp = __ib_open_qp(real_qp, qp_open_attr->event_handler,
+ qp_open_attr->qp_context);
+ break;
+ }
+ }
+ mutex_unlock(&xrcd->tgt_qp_mutex);
+ return qp;
+}
+EXPORT_SYMBOL(ib_open_qp);
+
struct ib_qp *ib_create_qp(struct ib_pd *pd,
struct ib_qp_init_attr *qp_init_attr)
{
- struct ib_qp *qp;
+ struct ib_qp *qp, *real_qp;
+ struct ib_device *device;
- qp = pd->device->create_qp(pd, qp_init_attr, NULL);
+ device = pd ? pd->device : qp_init_attr->xrcd->device;
+ qp = device->create_qp(pd, qp_init_attr, NULL);
if (!IS_ERR(qp)) {
- qp->device = pd->device;
- qp->pd = pd;
- qp->send_cq = qp_init_attr->send_cq;
- qp->recv_cq = qp_init_attr->recv_cq;
- qp->srq = qp_init_attr->srq;
- qp->uobject = NULL;
- qp->event_handler = qp_init_attr->event_handler;
- qp->qp_context = qp_init_attr->qp_context;
- qp->qp_type = qp_init_attr->qp_type;
- atomic_inc(&pd->usecnt);
- atomic_inc(&qp_init_attr->send_cq->usecnt);
- atomic_inc(&qp_init_attr->recv_cq->usecnt);
- if (qp_init_attr->srq)
- atomic_inc(&qp_init_attr->srq->usecnt);
+ qp->device = device;
+ qp->real_qp = qp;
+ qp->uobject = NULL;
+ qp->qp_type = qp_init_attr->qp_type;
+
+ if (qp_init_attr->qp_type == IB_QPT_XRC_TGT) {
+ qp->event_handler = __ib_shared_qp_event_handler;
+ qp->qp_context = qp;
+ qp->pd = NULL;
+ qp->send_cq = qp->recv_cq = NULL;
+ qp->srq = NULL;
+ qp->xrcd = qp_init_attr->xrcd;
+ atomic_inc(&qp_init_attr->xrcd->usecnt);
+ INIT_LIST_HEAD(&qp->open_list);
+ atomic_set(&qp->usecnt, 0);
+
+ real_qp = qp;
+ qp = __ib_open_qp(real_qp, qp_init_attr->event_handler,
+ qp_init_attr->qp_context);
+ if (!IS_ERR(qp))
+ __ib_insert_xrcd_qp(qp_init_attr->xrcd, real_qp);
+ else
+ real_qp->device->destroy_qp(real_qp);
+ } else {
+ qp->event_handler = qp_init_attr->event_handler;
+ qp->qp_context = qp_init_attr->qp_context;
+ if (qp_init_attr->qp_type == IB_QPT_XRC_INI) {
+ qp->recv_cq = NULL;
+ qp->srq = NULL;
+ } else {
+ qp->recv_cq = qp_init_attr->recv_cq;
+ atomic_inc(&qp_init_attr->recv_cq->usecnt);
+ qp->srq = qp_init_attr->srq;
+ if (qp->srq)
+ atomic_inc(&qp_init_attr->srq->usecnt);
+ }
+
+ qp->pd = pd;
+ qp->send_cq = qp_init_attr->send_cq;
+ qp->xrcd = NULL;
+
+ atomic_inc(&pd->usecnt);
+ atomic_inc(&qp_init_attr->send_cq->usecnt);
+ }
}
return qp;
@@ -326,8 +467,8 @@
static const struct {
int valid;
- enum ib_qp_attr_mask req_param[IB_QPT_RAW_ETHERTYPE + 1];
- enum ib_qp_attr_mask opt_param[IB_QPT_RAW_ETHERTYPE + 1];
+ enum ib_qp_attr_mask req_param[IB_QPT_MAX];
+ enum ib_qp_attr_mask opt_param[IB_QPT_MAX];
} qp_state_table[IB_QPS_ERR + 1][IB_QPS_ERR + 1] = {
[IB_QPS_RESET] = {
[IB_QPS_RESET] = { .valid = 1 },
@@ -343,6 +484,12 @@
[IB_QPT_RC] = (IB_QP_PKEY_INDEX |
IB_QP_PORT |
IB_QP_ACCESS_FLAGS),
+ [IB_QPT_XRC_INI] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
+ [IB_QPT_XRC_TGT] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
[IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
IB_QP_QKEY),
[IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
@@ -365,6 +512,12 @@
[IB_QPT_RC] = (IB_QP_PKEY_INDEX |
IB_QP_PORT |
IB_QP_ACCESS_FLAGS),
+ [IB_QPT_XRC_INI] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
+ [IB_QPT_XRC_TGT] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
[IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
IB_QP_QKEY),
[IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
@@ -384,6 +537,16 @@
IB_QP_RQ_PSN |
IB_QP_MAX_DEST_RD_ATOMIC |
IB_QP_MIN_RNR_TIMER),
+ [IB_QPT_XRC_INI] = (IB_QP_AV |
+ IB_QP_PATH_MTU |
+ IB_QP_DEST_QPN |
+ IB_QP_RQ_PSN),
+ [IB_QPT_XRC_TGT] = (IB_QP_AV |
+ IB_QP_PATH_MTU |
+ IB_QP_DEST_QPN |
+ IB_QP_RQ_PSN |
+ IB_QP_MAX_DEST_RD_ATOMIC |
+ IB_QP_MIN_RNR_TIMER),
},
.opt_param = {
[IB_QPT_UD] = (IB_QP_PKEY_INDEX |
@@ -394,6 +557,12 @@
[IB_QPT_RC] = (IB_QP_ALT_PATH |
IB_QP_ACCESS_FLAGS |
IB_QP_PKEY_INDEX),
+ [IB_QPT_XRC_INI] = (IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX),
+ [IB_QPT_XRC_TGT] = (IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX),
[IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
IB_QP_QKEY),
[IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
@@ -414,6 +583,13 @@
IB_QP_RNR_RETRY |
IB_QP_SQ_PSN |
IB_QP_MAX_QP_RD_ATOMIC),
+ [IB_QPT_XRC_INI] = (IB_QP_TIMEOUT |
+ IB_QP_RETRY_CNT |
+ IB_QP_RNR_RETRY |
+ IB_QP_SQ_PSN |
+ IB_QP_MAX_QP_RD_ATOMIC),
+ [IB_QPT_XRC_TGT] = (IB_QP_TIMEOUT |
+ IB_QP_SQ_PSN),
[IB_QPT_SMI] = IB_QP_SQ_PSN,
[IB_QPT_GSI] = IB_QP_SQ_PSN,
},
@@ -429,6 +605,15 @@
IB_QP_ACCESS_FLAGS |
IB_QP_MIN_RNR_TIMER |
IB_QP_PATH_MIG_STATE),
+ [IB_QPT_XRC_INI] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_XRC_TGT] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_MIN_RNR_TIMER |
+ IB_QP_PATH_MIG_STATE),
[IB_QPT_SMI] = (IB_QP_CUR_STATE |
IB_QP_QKEY),
[IB_QPT_GSI] = (IB_QP_CUR_STATE |
@@ -453,6 +638,15 @@
IB_QP_ALT_PATH |
IB_QP_PATH_MIG_STATE |
IB_QP_MIN_RNR_TIMER),
+ [IB_QPT_XRC_INI] = (IB_QP_CUR_STATE |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_ALT_PATH |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_XRC_TGT] = (IB_QP_CUR_STATE |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_ALT_PATH |
+ IB_QP_PATH_MIG_STATE |
+ IB_QP_MIN_RNR_TIMER),
[IB_QPT_SMI] = (IB_QP_CUR_STATE |
IB_QP_QKEY),
[IB_QPT_GSI] = (IB_QP_CUR_STATE |
@@ -465,6 +659,8 @@
[IB_QPT_UD] = IB_QP_EN_SQD_ASYNC_NOTIFY,
[IB_QPT_UC] = IB_QP_EN_SQD_ASYNC_NOTIFY,
[IB_QPT_RC] = IB_QP_EN_SQD_ASYNC_NOTIFY,
+ [IB_QPT_XRC_INI] = IB_QP_EN_SQD_ASYNC_NOTIFY,
+ [IB_QPT_XRC_TGT] = IB_QP_EN_SQD_ASYNC_NOTIFY, /* ??? */
[IB_QPT_SMI] = IB_QP_EN_SQD_ASYNC_NOTIFY,
[IB_QPT_GSI] = IB_QP_EN_SQD_ASYNC_NOTIFY
}
@@ -487,6 +683,15 @@
IB_QP_ACCESS_FLAGS |
IB_QP_MIN_RNR_TIMER |
IB_QP_PATH_MIG_STATE),
+ [IB_QPT_XRC_INI] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_XRC_TGT] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_MIN_RNR_TIMER |
+ IB_QP_PATH_MIG_STATE),
[IB_QPT_SMI] = (IB_QP_CUR_STATE |
IB_QP_QKEY),
[IB_QPT_GSI] = (IB_QP_CUR_STATE |
@@ -515,6 +720,25 @@
IB_QP_PKEY_INDEX |
IB_QP_MIN_RNR_TIMER |
IB_QP_PATH_MIG_STATE),
+ [IB_QPT_XRC_INI] = (IB_QP_PORT |
+ IB_QP_AV |
+ IB_QP_TIMEOUT |
+ IB_QP_RETRY_CNT |
+ IB_QP_RNR_RETRY |
+ IB_QP_MAX_QP_RD_ATOMIC |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_XRC_TGT] = (IB_QP_PORT |
+ IB_QP_AV |
+ IB_QP_TIMEOUT |
+ IB_QP_MAX_DEST_RD_ATOMIC |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX |
+ IB_QP_MIN_RNR_TIMER |
+ IB_QP_PATH_MIG_STATE),
[IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
IB_QP_QKEY),
[IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
@@ -579,7 +803,7 @@
struct ib_qp_attr *qp_attr,
int qp_attr_mask)
{
- return qp->device->modify_qp(qp, qp_attr, qp_attr_mask, NULL);
+ return qp->device->modify_qp(qp->real_qp, qp_attr, qp_attr_mask, NULL);
}
EXPORT_SYMBOL(ib_modify_qp);
@@ -589,11 +813,59 @@
struct ib_qp_init_attr *qp_init_attr)
{
return qp->device->query_qp ?
- qp->device->query_qp(qp, qp_attr, qp_attr_mask, qp_init_attr) :
+ qp->device->query_qp(qp->real_qp, qp_attr, qp_attr_mask, qp_init_attr) :
-ENOSYS;
}
EXPORT_SYMBOL(ib_query_qp);
+int ib_close_qp(struct ib_qp *qp)
+{
+ struct ib_qp *real_qp;
+ unsigned long flags;
+
+ real_qp = qp->real_qp;
+ if (real_qp == qp)
+ return -EINVAL;
+
+ spin_lock_irqsave(&real_qp->device->event_handler_lock, flags);
+ list_del(&qp->open_list);
+ spin_unlock_irqrestore(&real_qp->device->event_handler_lock, flags);
+
+ atomic_dec(&real_qp->usecnt);
+ kfree(qp);
+
+ return 0;
+}
+EXPORT_SYMBOL(ib_close_qp);
+
+static int __ib_destroy_shared_qp(struct ib_qp *qp)
+{
+ struct ib_xrcd *xrcd;
+ struct ib_qp *real_qp;
+ int ret;
+
+ real_qp = qp->real_qp;
+ xrcd = real_qp->xrcd;
+
+ mutex_lock(&xrcd->tgt_qp_mutex);
+ ib_close_qp(qp);
+ if (atomic_read(&real_qp->usecnt) == 0)
+ list_del(&real_qp->xrcd_list);
+ else
+ real_qp = NULL;
+ mutex_unlock(&xrcd->tgt_qp_mutex);
+
+ if (real_qp) {
+ ret = ib_destroy_qp(real_qp);
+ if (!ret)
+ atomic_dec(&xrcd->usecnt);
+ else
+ __ib_insert_xrcd_qp(xrcd, real_qp);
+ }
+
+ return 0;
+}
+
int ib_destroy_qp(struct ib_qp *qp)
{
struct ib_pd *pd;
@@ -601,16 +873,25 @@
struct ib_srq *srq;
int ret;
- pd = qp->pd;
- scq = qp->send_cq;
- rcq = qp->recv_cq;
- srq = qp->srq;
+ if (atomic_read(&qp->usecnt))
+ return -EBUSY;
+
+ if (qp->real_qp != qp)
+ return __ib_destroy_shared_qp(qp);
+
+ pd = qp->pd;
+ scq = qp->send_cq;
+ rcq = qp->recv_cq;
+ srq = qp->srq;
ret = qp->device->destroy_qp(qp);
if (!ret) {
- atomic_dec(&pd->usecnt);
- atomic_dec(&scq->usecnt);
- atomic_dec(&rcq->usecnt);
+ if (pd)
+ atomic_dec(&pd->usecnt);
+ if (scq)
+ atomic_dec(&scq->usecnt);
+ if (rcq)
+ atomic_dec(&rcq->usecnt);
if (srq)
atomic_dec(&srq->usecnt);
}
@@ -920,3 +1201,42 @@
return qp->device->detach_mcast(qp, gid, lid);
}
EXPORT_SYMBOL(ib_detach_mcast);
+
+struct ib_xrcd *ib_alloc_xrcd(struct ib_device *device)
+{
+ struct ib_xrcd *xrcd;
+
+ if (!device->alloc_xrcd)
+ return ERR_PTR(-ENOSYS);
+
+ xrcd = device->alloc_xrcd(device, NULL, NULL);
+ if (!IS_ERR(xrcd)) {
+ xrcd->device = device;
+ xrcd->inode = NULL;
+ atomic_set(&xrcd->usecnt, 0);
+ mutex_init(&xrcd->tgt_qp_mutex);
+ INIT_LIST_HEAD(&xrcd->tgt_qp_list);
+ }
+
+ return xrcd;
+}
+EXPORT_SYMBOL(ib_alloc_xrcd);
+
+int ib_dealloc_xrcd(struct ib_xrcd *xrcd)
+{
+ struct ib_qp *qp;
+ int ret;
+
+ if (atomic_read(&xrcd->usecnt))
+ return -EBUSY;
+
+ while (!list_empty(&xrcd->tgt_qp_list)) {
+ qp = list_entry(xrcd->tgt_qp_list.next, struct ib_qp, xrcd_list);
+ ret = ib_destroy_qp(qp);
+ if (ret)
+ return ret;
+ }
+
+ return xrcd->device->dealloc_xrcd(xrcd);
+}
+EXPORT_SYMBOL(ib_dealloc_xrcd);
diff --git a/drivers/infiniband/hw/amso1100/c2_ae.c b/drivers/infiniband/hw/amso1100/c2_ae.c
index 24f9e3a..32d34e8 100644
--- a/drivers/infiniband/hw/amso1100/c2_ae.c
+++ b/drivers/infiniband/hw/amso1100/c2_ae.c
@@ -288,6 +288,11 @@
cm_event.private_data_len =
be32_to_cpu(req->private_data_length);
cm_event.private_data = req->private_data;
+ /*
+ * Until ird/ord negotiation via MPAv2 support is added, send
+ * max supported values
+ */
+ cm_event.ird = cm_event.ord = 128;
if (cm_id->event_handler)
cm_id->event_handler(cm_id, &cm_event);
diff --git a/drivers/infiniband/hw/amso1100/c2_intr.c b/drivers/infiniband/hw/amso1100/c2_intr.c
index 0ebe4e8..8951db4 100644
--- a/drivers/infiniband/hw/amso1100/c2_intr.c
+++ b/drivers/infiniband/hw/amso1100/c2_intr.c
@@ -183,6 +183,11 @@
case IW_CM_EVENT_ESTABLISHED:
c2_set_qp_state(req->qp,
C2_QP_STATE_RTS);
+ /*
+ * Until ird/ord negotiation via MPAv2 support is added, send
+ * max supported values
+ */
+ cm_event.ird = cm_event.ord = 128;
case IW_CM_EVENT_CLOSE:
/*
diff --git a/drivers/infiniband/hw/amso1100/c2_provider.c b/drivers/infiniband/hw/amso1100/c2_provider.c
index f101bb7..12f923d 100644
--- a/drivers/infiniband/hw/amso1100/c2_provider.c
+++ b/drivers/infiniband/hw/amso1100/c2_provider.c
@@ -753,10 +753,7 @@
memcpy_fromio(netdev->dev_addr, c2dev->kva + C2_REGS_RDMA_ENADDR, 6);
/* Print out the MAC address */
- pr_debug("%s: MAC %02X:%02X:%02X:%02X:%02X:%02X\n",
- netdev->name,
- netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
- netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
+ pr_debug("%s: MAC %pM\n", netdev->name, netdev->dev_addr);
#if 0
/* Disable network packets */
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 6cd642a..de6d077 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -753,6 +753,11 @@
event.private_data_len = ep->plen;
event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
event.provider_data = ep;
+ /*
+ * Until ird/ord negotiation via MPAv2 support is added, send max
+ * supported values
+ */
+ event.ird = event.ord = 8;
if (state_read(&ep->parent_ep->com) != DEAD) {
get_ep(&ep->com);
ep->parent_ep->com.cm_id->event_handler(
@@ -770,6 +775,11 @@
PDBG("%s ep %p\n", __func__, ep);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_ESTABLISHED;
+ /*
+ * Until ird/ord negotiation via MPAv2 support is added, send max
+ * supported values
+ */
+ event.ird = event.ord = 8;
if (ep->com.cm_id) {
PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_ev.c b/drivers/infiniband/hw/cxgb3/iwch_ev.c
index 71e0d84..abcc9e7 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_ev.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_ev.c
@@ -46,6 +46,7 @@
struct ib_event event;
struct iwch_qp_attributes attrs;
struct iwch_qp *qhp;
+ unsigned long flag;
spin_lock(&rnicp->lock);
qhp = get_qhp(rnicp, CQE_QPID(rsp_msg->cqe));
@@ -94,7 +95,9 @@
if (qhp->ibqp.event_handler)
(*qhp->ibqp.event_handler)(&event, qhp->ibqp.qp_context);
+ spin_lock_irqsave(&chp->comp_handler_lock, flag);
(*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context);
+ spin_unlock_irqrestore(&chp->comp_handler_lock, flag);
if (atomic_dec_and_test(&qhp->refcnt))
wake_up(&qhp->wait);
@@ -107,6 +110,7 @@
struct iwch_cq *chp;
struct iwch_qp *qhp;
u32 cqid = RSPQ_CQID(rsp_msg);
+ unsigned long flag;
rnicp = (struct iwch_dev *) rdev_p->ulp;
spin_lock(&rnicp->lock);
@@ -170,7 +174,9 @@
*/
if (qhp->ep && SQ_TYPE(rsp_msg->cqe))
dst_confirm(qhp->ep->dst);
+ spin_lock_irqsave(&chp->comp_handler_lock, flag);
(*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context);
+ spin_unlock_irqrestore(&chp->comp_handler_lock, flag);
break;
case TPT_ERR_STAG:
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index c7d9411..37c224f 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -190,6 +190,7 @@
chp->rhp = rhp;
chp->ibcq.cqe = 1 << chp->cq.size_log2;
spin_lock_init(&chp->lock);
+ spin_lock_init(&chp->comp_handler_lock);
atomic_set(&chp->refcnt, 1);
init_waitqueue_head(&chp->wait);
if (insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid)) {
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h
index 9a342c9..87c14b0 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h
@@ -103,6 +103,7 @@
struct iwch_dev *rhp;
struct t3_cq cq;
spinlock_t lock;
+ spinlock_t comp_handler_lock;
atomic_t refcnt;
wait_queue_head_t wait;
u32 __user *user_rptr_addr;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index ecd313f..bea5839 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -822,8 +822,11 @@
flushed = cxio_flush_rq(&qhp->wq, &rchp->cq, count);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&rchp->lock, *flag);
- if (flushed)
+ if (flushed) {
+ spin_lock_irqsave(&rchp->comp_handler_lock, *flag);
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
+ spin_unlock_irqrestore(&rchp->comp_handler_lock, *flag);
+ }
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
@@ -833,8 +836,11 @@
flushed = cxio_flush_sq(&qhp->wq, &schp->cq, count);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&schp->lock, *flag);
- if (flushed)
+ if (flushed) {
+ spin_lock_irqsave(&schp->comp_handler_lock, *flag);
(*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context);
+ spin_unlock_irqrestore(&schp->comp_handler_lock, *flag);
+ }
/* deref */
if (atomic_dec_and_test(&qhp->refcnt))
@@ -853,11 +859,15 @@
if (qhp->ibqp.uobject) {
cxio_set_wq_in_error(&qhp->wq);
cxio_set_cq_in_error(&rchp->cq);
+ spin_lock_irqsave(&rchp->comp_handler_lock, *flag);
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
+ spin_unlock_irqrestore(&rchp->comp_handler_lock, *flag);
if (schp != rchp) {
cxio_set_cq_in_error(&schp->cq);
+ spin_lock_irqsave(&schp->comp_handler_lock, *flag);
(*schp->ibcq.comp_handler)(&schp->ibcq,
schp->ibcq.cq_context);
+ spin_unlock_irqrestore(&schp->comp_handler_lock, *flag);
}
return;
}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 77f769d..b36cdac 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -103,7 +103,8 @@
static int mpa_rev = 1;
module_param(mpa_rev, int, 0644);
MODULE_PARM_DESC(mpa_rev, "MPA Revision, 0 supports amso1100, "
- "1 is spec compliant. (default=1)");
+ "1 is RFC0544 spec compliant, 2 is IETF MPA Peer Connect Draft"
+ " compliant (default=1)");
static int markers_enabled;
module_param(markers_enabled, int, 0644);
@@ -497,17 +498,21 @@
return c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
}
-static void send_mpa_req(struct c4iw_ep *ep, struct sk_buff *skb)
+static void send_mpa_req(struct c4iw_ep *ep, struct sk_buff *skb,
+ u8 mpa_rev_to_use)
{
int mpalen, wrlen;
struct fw_ofld_tx_data_wr *req;
struct mpa_message *mpa;
+ struct mpa_v2_conn_params mpa_v2_params;
PDBG("%s ep %p tid %u pd_len %d\n", __func__, ep, ep->hwtid, ep->plen);
BUG_ON(skb_cloned(skb));
mpalen = sizeof(*mpa) + ep->plen;
+ if (mpa_rev_to_use == 2)
+ mpalen += sizeof(struct mpa_v2_conn_params);
wrlen = roundup(mpalen + sizeof *req, 16);
skb = get_skb(skb, wrlen, GFP_KERNEL);
if (!skb) {
@@ -533,12 +538,39 @@
mpa = (struct mpa_message *)(req + 1);
memcpy(mpa->key, MPA_KEY_REQ, sizeof(mpa->key));
mpa->flags = (crc_enabled ? MPA_CRC : 0) |
- (markers_enabled ? MPA_MARKERS : 0);
+ (markers_enabled ? MPA_MARKERS : 0) |
+ (mpa_rev_to_use == 2 ? MPA_ENHANCED_RDMA_CONN : 0);
mpa->private_data_size = htons(ep->plen);
- mpa->revision = mpa_rev;
+ mpa->revision = mpa_rev_to_use;
+ if (mpa_rev_to_use == 1)
+ ep->tried_with_mpa_v1 = 1;
- if (ep->plen)
- memcpy(mpa->private_data, ep->mpa_pkt + sizeof(*mpa), ep->plen);
+ if (mpa_rev_to_use == 2) {
+ mpa->private_data_size +=
+ htons(sizeof(struct mpa_v2_conn_params));
+ mpa_v2_params.ird = htons((u16)ep->ird);
+ mpa_v2_params.ord = htons((u16)ep->ord);
+
+ if (peer2peer) {
+ mpa_v2_params.ird |= htons(MPA_V2_PEER2PEER_MODEL);
+ if (p2p_type == FW_RI_INIT_P2PTYPE_RDMA_WRITE)
+ mpa_v2_params.ord |=
+ htons(MPA_V2_RDMA_WRITE_RTR);
+ else if (p2p_type == FW_RI_INIT_P2PTYPE_READ_REQ)
+ mpa_v2_params.ord |=
+ htons(MPA_V2_RDMA_READ_RTR);
+ }
+ memcpy(mpa->private_data, &mpa_v2_params,
+ sizeof(struct mpa_v2_conn_params));
+
+ if (ep->plen)
+ memcpy(mpa->private_data +
+ sizeof(struct mpa_v2_conn_params),
+ ep->mpa_pkt + sizeof(*mpa), ep->plen);
+ } else
+ if (ep->plen)
+ memcpy(mpa->private_data,
+ ep->mpa_pkt + sizeof(*mpa), ep->plen);
/*
* Reference the mpa skb. This ensures the data area
@@ -562,10 +594,13 @@
struct fw_ofld_tx_data_wr *req;
struct mpa_message *mpa;
struct sk_buff *skb;
+ struct mpa_v2_conn_params mpa_v2_params;
PDBG("%s ep %p tid %u pd_len %d\n", __func__, ep, ep->hwtid, ep->plen);
mpalen = sizeof(*mpa) + plen;
+ if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn)
+ mpalen += sizeof(struct mpa_v2_conn_params);
wrlen = roundup(mpalen + sizeof *req, 16);
skb = get_skb(NULL, wrlen, GFP_KERNEL);
@@ -595,8 +630,29 @@
mpa->flags = MPA_REJECT;
mpa->revision = mpa_rev;
mpa->private_data_size = htons(plen);
- if (plen)
- memcpy(mpa->private_data, pdata, plen);
+
+ if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn) {
+ mpa->flags |= MPA_ENHANCED_RDMA_CONN;
+ mpa->private_data_size +=
+ htons(sizeof(struct mpa_v2_conn_params));
+ mpa_v2_params.ird = htons(((u16)ep->ird) |
+ (peer2peer ? MPA_V2_PEER2PEER_MODEL :
+ 0));
+ mpa_v2_params.ord = htons(((u16)ep->ord) | (peer2peer ?
+ (p2p_type ==
+ FW_RI_INIT_P2PTYPE_RDMA_WRITE ?
+ MPA_V2_RDMA_WRITE_RTR : p2p_type ==
+ FW_RI_INIT_P2PTYPE_READ_REQ ?
+ MPA_V2_RDMA_READ_RTR : 0) : 0));
+ memcpy(mpa->private_data, &mpa_v2_params,
+ sizeof(struct mpa_v2_conn_params));
+
+ if (ep->plen)
+ memcpy(mpa->private_data +
+ sizeof(struct mpa_v2_conn_params), pdata, plen);
+ } else
+ if (plen)
+ memcpy(mpa->private_data, pdata, plen);
/*
* Reference the mpa skb again. This ensures the data area
@@ -617,10 +673,13 @@
struct fw_ofld_tx_data_wr *req;
struct mpa_message *mpa;
struct sk_buff *skb;
+ struct mpa_v2_conn_params mpa_v2_params;
PDBG("%s ep %p tid %u pd_len %d\n", __func__, ep, ep->hwtid, ep->plen);
mpalen = sizeof(*mpa) + plen;
+ if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn)
+ mpalen += sizeof(struct mpa_v2_conn_params);
wrlen = roundup(mpalen + sizeof *req, 16);
skb = get_skb(NULL, wrlen, GFP_KERNEL);
@@ -649,10 +708,36 @@
memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key));
mpa->flags = (ep->mpa_attr.crc_enabled ? MPA_CRC : 0) |
(markers_enabled ? MPA_MARKERS : 0);
- mpa->revision = mpa_rev;
+ mpa->revision = ep->mpa_attr.version;
mpa->private_data_size = htons(plen);
- if (plen)
- memcpy(mpa->private_data, pdata, plen);
+
+ if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn) {
+ mpa->flags |= MPA_ENHANCED_RDMA_CONN;
+ mpa->private_data_size +=
+ htons(sizeof(struct mpa_v2_conn_params));
+ mpa_v2_params.ird = htons((u16)ep->ird);
+ mpa_v2_params.ord = htons((u16)ep->ord);
+ if (peer2peer && (ep->mpa_attr.p2p_type !=
+ FW_RI_INIT_P2PTYPE_DISABLED)) {
+ mpa_v2_params.ird |= htons(MPA_V2_PEER2PEER_MODEL);
+
+ if (p2p_type == FW_RI_INIT_P2PTYPE_RDMA_WRITE)
+ mpa_v2_params.ord |=
+ htons(MPA_V2_RDMA_WRITE_RTR);
+ else if (p2p_type == FW_RI_INIT_P2PTYPE_READ_REQ)
+ mpa_v2_params.ord |=
+ htons(MPA_V2_RDMA_READ_RTR);
+ }
+
+ memcpy(mpa->private_data, &mpa_v2_params,
+ sizeof(struct mpa_v2_conn_params));
+
+ if (ep->plen)
+ memcpy(mpa->private_data +
+ sizeof(struct mpa_v2_conn_params), pdata, plen);
+ } else
+ if (plen)
+ memcpy(mpa->private_data, pdata, plen);
/*
* Reference the mpa skb. This ensures the data area
@@ -695,7 +780,10 @@
/* start MPA negotiation */
send_flowc(ep, NULL);
- send_mpa_req(ep, skb);
+ if (ep->retry_with_mpa_v1)
+ send_mpa_req(ep, skb, 1);
+ else
+ send_mpa_req(ep, skb, mpa_rev);
return 0;
}
@@ -769,8 +857,19 @@
event.remote_addr = ep->com.remote_addr;
if ((status == 0) || (status == -ECONNREFUSED)) {
- event.private_data_len = ep->plen;
- event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
+ if (!ep->tried_with_mpa_v1) {
+ /* this means MPA_v2 is used */
+ event.private_data_len = ep->plen -
+ sizeof(struct mpa_v2_conn_params);
+ event.private_data = ep->mpa_pkt +
+ sizeof(struct mpa_message) +
+ sizeof(struct mpa_v2_conn_params);
+ } else {
+ /* this means MPA_v1 is used */
+ event.private_data_len = ep->plen;
+ event.private_data = ep->mpa_pkt +
+ sizeof(struct mpa_message);
+ }
}
PDBG("%s ep %p tid %u status %d\n", __func__, ep,
@@ -793,9 +892,22 @@
event.event = IW_CM_EVENT_CONNECT_REQUEST;
event.local_addr = ep->com.local_addr;
event.remote_addr = ep->com.remote_addr;
- event.private_data_len = ep->plen;
- event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
event.provider_data = ep;
+ if (!ep->tried_with_mpa_v1) {
+ /* this means MPA_v2 is used */
+ event.ord = ep->ord;
+ event.ird = ep->ird;
+ event.private_data_len = ep->plen -
+ sizeof(struct mpa_v2_conn_params);
+ event.private_data = ep->mpa_pkt + sizeof(struct mpa_message) +
+ sizeof(struct mpa_v2_conn_params);
+ } else {
+ /* this means MPA_v1 is used. Send max supported */
+ event.ord = c4iw_max_read_depth;
+ event.ird = c4iw_max_read_depth;
+ event.private_data_len = ep->plen;
+ event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
+ }
if (state_read(&ep->parent_ep->com) != DEAD) {
c4iw_get_ep(&ep->com);
ep->parent_ep->com.cm_id->event_handler(
@@ -813,6 +925,8 @@
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_ESTABLISHED;
+ event.ird = ep->ird;
+ event.ord = ep->ord;
if (ep->com.cm_id) {
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
@@ -848,7 +962,10 @@
static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
{
struct mpa_message *mpa;
+ struct mpa_v2_conn_params *mpa_v2_params;
u16 plen;
+ u16 resp_ird, resp_ord;
+ u8 rtr_mismatch = 0, insuff_ird = 0;
struct c4iw_qp_attributes attrs;
enum c4iw_qp_attr_mask mask;
int err;
@@ -888,7 +1005,9 @@
mpa = (struct mpa_message *) ep->mpa_pkt;
/* Validate MPA header. */
- if (mpa->revision != mpa_rev) {
+ if (mpa->revision > mpa_rev) {
+ printk(KERN_ERR MOD "%s MPA version mismatch. Local = %d,"
+ " Received = %d\n", __func__, mpa_rev, mpa->revision);
err = -EPROTO;
goto err;
}
@@ -938,13 +1057,66 @@
ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0;
ep->mpa_attr.recv_marker_enabled = markers_enabled;
ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0;
- ep->mpa_attr.version = mpa_rev;
- ep->mpa_attr.p2p_type = peer2peer ? p2p_type :
- FW_RI_INIT_P2PTYPE_DISABLED;
+ ep->mpa_attr.version = mpa->revision;
+ ep->mpa_attr.p2p_type = FW_RI_INIT_P2PTYPE_DISABLED;
+
+ if (mpa->revision == 2) {
+ ep->mpa_attr.enhanced_rdma_conn =
+ mpa->flags & MPA_ENHANCED_RDMA_CONN ? 1 : 0;
+ if (ep->mpa_attr.enhanced_rdma_conn) {
+ mpa_v2_params = (struct mpa_v2_conn_params *)
+ (ep->mpa_pkt + sizeof(*mpa));
+ resp_ird = ntohs(mpa_v2_params->ird) &
+ MPA_V2_IRD_ORD_MASK;
+ resp_ord = ntohs(mpa_v2_params->ord) &
+ MPA_V2_IRD_ORD_MASK;
+
+ /*
+ * This is a double-check. Ideally, below checks are
+ * not required since ird/ord stuff has been taken
+ * care of in c4iw_accept_cr
+ */
+ if ((ep->ird < resp_ord) || (ep->ord > resp_ird)) {
+ err = -ENOMEM;
+ ep->ird = resp_ord;
+ ep->ord = resp_ird;
+ insuff_ird = 1;
+ }
+
+ if (ntohs(mpa_v2_params->ird) &
+ MPA_V2_PEER2PEER_MODEL) {
+ if (ntohs(mpa_v2_params->ord) &
+ MPA_V2_RDMA_WRITE_RTR)
+ ep->mpa_attr.p2p_type =
+ FW_RI_INIT_P2PTYPE_RDMA_WRITE;
+ else if (ntohs(mpa_v2_params->ord) &
+ MPA_V2_RDMA_READ_RTR)
+ ep->mpa_attr.p2p_type =
+ FW_RI_INIT_P2PTYPE_READ_REQ;
+ }
+ }
+ } else if (mpa->revision == 1)
+ if (peer2peer)
+ ep->mpa_attr.p2p_type = p2p_type;
+
PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, "
- "xmit_marker_enabled=%d, version=%d\n", __func__,
- ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled,
- ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version);
+ "xmit_marker_enabled=%d, version=%d p2p_type=%d local-p2p_type = "
+ "%d\n", __func__, ep->mpa_attr.crc_enabled,
+ ep->mpa_attr.recv_marker_enabled,
+ ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version,
+ ep->mpa_attr.p2p_type, p2p_type);
+
+ /*
+ * If responder's RTR does not match with that of initiator, assign
+ * FW_RI_INIT_P2PTYPE_DISABLED in mpa attributes so that RTR is not
+ * generated when moving QP to RTS state.
+ * A TERM message will be sent after QP has moved to RTS state
+ */
+ if ((ep->mpa_attr.version == 2) &&
+ (ep->mpa_attr.p2p_type != p2p_type)) {
+ ep->mpa_attr.p2p_type = FW_RI_INIT_P2PTYPE_DISABLED;
+ rtr_mismatch = 1;
+ }
attrs.mpa_attr = ep->mpa_attr;
attrs.max_ird = ep->ird;
@@ -961,6 +1133,39 @@
ep->com.qp, mask, &attrs, 1);
if (err)
goto err;
+
+ /*
+ * If responder's RTR requirement did not match with what initiator
+ * supports, generate TERM message
+ */
+ if (rtr_mismatch) {
+ printk(KERN_ERR "%s: RTR mismatch, sending TERM\n", __func__);
+ attrs.layer_etype = LAYER_MPA | DDP_LLP;
+ attrs.ecode = MPA_NOMATCH_RTR;
+ attrs.next_state = C4IW_QP_STATE_TERMINATE;
+ err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+ C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * Generate TERM if initiator IRD is not sufficient for responder
+ * provided ORD. Currently, we do the same behaviour even when
+ * responder provided IRD is also not sufficient as regards to
+ * initiator ORD.
+ */
+ if (insuff_ird) {
+ printk(KERN_ERR "%s: Insufficient IRD, sending TERM\n",
+ __func__);
+ attrs.layer_etype = LAYER_MPA | DDP_LLP;
+ attrs.ecode = MPA_INSUFF_IRD;
+ attrs.next_state = C4IW_QP_STATE_TERMINATE;
+ err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+ C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
+ err = -ENOMEM;
+ goto out;
+ }
goto out;
err:
state_set(&ep->com, ABORTING);
@@ -973,6 +1178,7 @@
static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
{
struct mpa_message *mpa;
+ struct mpa_v2_conn_params *mpa_v2_params;
u16 plen;
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
@@ -1013,7 +1219,9 @@
/*
* Validate MPA Header.
*/
- if (mpa->revision != mpa_rev) {
+ if (mpa->revision > mpa_rev) {
+ printk(KERN_ERR MOD "%s MPA version mismatch. Local = %d,"
+ " Received = %d\n", __func__, mpa_rev, mpa->revision);
abort_connection(ep, skb, GFP_KERNEL);
return;
}
@@ -1056,9 +1264,37 @@
ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0;
ep->mpa_attr.recv_marker_enabled = markers_enabled;
ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0;
- ep->mpa_attr.version = mpa_rev;
- ep->mpa_attr.p2p_type = peer2peer ? p2p_type :
- FW_RI_INIT_P2PTYPE_DISABLED;
+ ep->mpa_attr.version = mpa->revision;
+ if (mpa->revision == 1)
+ ep->tried_with_mpa_v1 = 1;
+ ep->mpa_attr.p2p_type = FW_RI_INIT_P2PTYPE_DISABLED;
+
+ if (mpa->revision == 2) {
+ ep->mpa_attr.enhanced_rdma_conn =
+ mpa->flags & MPA_ENHANCED_RDMA_CONN ? 1 : 0;
+ if (ep->mpa_attr.enhanced_rdma_conn) {
+ mpa_v2_params = (struct mpa_v2_conn_params *)
+ (ep->mpa_pkt + sizeof(*mpa));
+ ep->ird = ntohs(mpa_v2_params->ird) &
+ MPA_V2_IRD_ORD_MASK;
+ ep->ord = ntohs(mpa_v2_params->ord) &
+ MPA_V2_IRD_ORD_MASK;
+ if (ntohs(mpa_v2_params->ird) & MPA_V2_PEER2PEER_MODEL)
+ if (peer2peer) {
+ if (ntohs(mpa_v2_params->ord) &
+ MPA_V2_RDMA_WRITE_RTR)
+ ep->mpa_attr.p2p_type =
+ FW_RI_INIT_P2PTYPE_RDMA_WRITE;
+ else if (ntohs(mpa_v2_params->ord) &
+ MPA_V2_RDMA_READ_RTR)
+ ep->mpa_attr.p2p_type =
+ FW_RI_INIT_P2PTYPE_READ_REQ;
+ }
+ }
+ } else if (mpa->revision == 1)
+ if (peer2peer)
+ ep->mpa_attr.p2p_type = p2p_type;
+
PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, "
"xmit_marker_enabled=%d, version=%d p2p_type=%d\n", __func__,
ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled,
@@ -1550,6 +1786,112 @@
status == CPL_ERR_PERSIST_NEG_ADVICE;
}
+static int c4iw_reconnect(struct c4iw_ep *ep)
+{
+ int err = 0;
+ struct rtable *rt;
+ struct net_device *pdev;
+ struct neighbour *neigh;
+ int step;
+
+ PDBG("%s qp %p cm_id %p\n", __func__, ep->com.qp, ep->com.cm_id);
+ init_timer(&ep->timer);
+
+ /*
+ * Allocate an active TID to initiate a TCP connection.
+ */
+ ep->atid = cxgb4_alloc_atid(ep->com.dev->rdev.lldi.tids, ep);
+ if (ep->atid == -1) {
+ printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __func__);
+ err = -ENOMEM;
+ goto fail2;
+ }
+
+ /* find a route */
+ rt = find_route(ep->com.dev,
+ ep->com.cm_id->local_addr.sin_addr.s_addr,
+ ep->com.cm_id->remote_addr.sin_addr.s_addr,
+ ep->com.cm_id->local_addr.sin_port,
+ ep->com.cm_id->remote_addr.sin_port, 0);
+ if (!rt) {
+ printk(KERN_ERR MOD "%s - cannot find route.\n", __func__);
+ err = -EHOSTUNREACH;
+ goto fail3;
+ }
+ ep->dst = &rt->dst;
+
+ neigh = dst_get_neighbour(ep->dst);
+
+ /* get a l2t entry */
+ if (neigh->dev->flags & IFF_LOOPBACK) {
+ PDBG("%s LOOPBACK\n", __func__);
+ pdev = ip_dev_find(&init_net,
+ ep->com.cm_id->remote_addr.sin_addr.s_addr);
+ ep->l2t = cxgb4_l2t_get(ep->com.dev->rdev.lldi.l2t,
+ neigh, pdev, 0);
+ ep->mtu = pdev->mtu;
+ ep->tx_chan = cxgb4_port_chan(pdev);
+ ep->smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
+ step = ep->com.dev->rdev.lldi.ntxq /
+ ep->com.dev->rdev.lldi.nchan;
+ ep->txq_idx = cxgb4_port_idx(pdev) * step;
+ step = ep->com.dev->rdev.lldi.nrxq /
+ ep->com.dev->rdev.lldi.nchan;
+ ep->ctrlq_idx = cxgb4_port_idx(pdev);
+ ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[
+ cxgb4_port_idx(pdev) * step];
+ dev_put(pdev);
+ } else {
+ ep->l2t = cxgb4_l2t_get(ep->com.dev->rdev.lldi.l2t,
+ neigh, neigh->dev, 0);
+ ep->mtu = dst_mtu(ep->dst);
+ ep->tx_chan = cxgb4_port_chan(neigh->dev);
+ ep->smac_idx = (cxgb4_port_viid(neigh->dev) & 0x7F) << 1;
+ step = ep->com.dev->rdev.lldi.ntxq /
+ ep->com.dev->rdev.lldi.nchan;
+ ep->txq_idx = cxgb4_port_idx(neigh->dev) * step;
+ ep->ctrlq_idx = cxgb4_port_idx(neigh->dev);
+ step = ep->com.dev->rdev.lldi.nrxq /
+ ep->com.dev->rdev.lldi.nchan;
+ ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[
+ cxgb4_port_idx(neigh->dev) * step];
+ }
+ if (!ep->l2t) {
+ printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__);
+ err = -ENOMEM;
+ goto fail4;
+ }
+
+ PDBG("%s txq_idx %u tx_chan %u smac_idx %u rss_qid %u l2t_idx %u\n",
+ __func__, ep->txq_idx, ep->tx_chan, ep->smac_idx, ep->rss_qid,
+ ep->l2t->idx);
+
+ state_set(&ep->com, CONNECTING);
+ ep->tos = 0;
+
+ /* send connect request to rnic */
+ err = send_connect(ep);
+ if (!err)
+ goto out;
+
+ cxgb4_l2t_release(ep->l2t);
+fail4:
+ dst_release(ep->dst);
+fail3:
+ cxgb4_free_atid(ep->com.dev->rdev.lldi.tids, ep->atid);
+fail2:
+ /*
+ * remember to send notification to upper layer.
+ * We are in here so the upper layer is not aware that this is
+ * re-connect attempt and so, upper layer is still waiting for
+ * response of 1st connect request.
+ */
+ connect_reply_upcall(ep, -ECONNRESET);
+ c4iw_put_ep(&ep->com);
+out:
+ return err;
+}
+
static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_abort_req_rss *req = cplhdr(skb);
@@ -1573,8 +1915,11 @@
/*
* Wake up any threads in rdma_init() or rdma_fini().
+ * However, this is not needed if com state is just
+ * MPA_REQ_SENT
*/
- c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
+ if (ep->com.state != MPA_REQ_SENT)
+ c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
mutex_lock(&ep->com.mutex);
switch (ep->com.state) {
@@ -1585,7 +1930,21 @@
break;
case MPA_REQ_SENT:
stop_ep_timer(ep);
- connect_reply_upcall(ep, -ECONNRESET);
+ if (mpa_rev == 2 && ep->tried_with_mpa_v1)
+ connect_reply_upcall(ep, -ECONNRESET);
+ else {
+ /*
+ * we just don't send notification upwards because we
+ * want to retry with mpa_v1 without upper layers even
+ * knowing it.
+ *
+ * do some housekeeping so as to re-initiate the
+ * connection
+ */
+ PDBG("%s: mpa_rev=%d. Retrying with mpav1\n", __func__,
+ mpa_rev);
+ ep->retry_with_mpa_v1 = 1;
+ }
break;
case MPA_REP_SENT:
break;
@@ -1621,7 +1980,9 @@
dst_confirm(ep->dst);
if (ep->com.state != ABORTING) {
__state_set(&ep->com, DEAD);
- release = 1;
+ /* we don't release if we want to retry with mpa_v1 */
+ if (!ep->retry_with_mpa_v1)
+ release = 1;
}
mutex_unlock(&ep->com.mutex);
@@ -1641,6 +2002,15 @@
out:
if (release)
release_ep_resources(ep);
+
+ /* retry with mpa-v1 */
+ if (ep && ep->retry_with_mpa_v1) {
+ cxgb4_remove_tid(ep->com.dev->rdev.lldi.tids, 0, ep->hwtid);
+ dst_release(ep->dst);
+ cxgb4_l2t_release(ep->l2t);
+ c4iw_reconnect(ep);
+ }
+
return 0;
}
@@ -1792,18 +2162,40 @@
goto err;
}
- cm_id->add_ref(cm_id);
- ep->com.cm_id = cm_id;
- ep->com.qp = qp;
+ if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn) {
+ if (conn_param->ord > ep->ird) {
+ ep->ird = conn_param->ird;
+ ep->ord = conn_param->ord;
+ send_mpa_reject(ep, conn_param->private_data,
+ conn_param->private_data_len);
+ abort_connection(ep, NULL, GFP_KERNEL);
+ err = -ENOMEM;
+ goto err;
+ }
+ if (conn_param->ird > ep->ord) {
+ if (!ep->ord)
+ conn_param->ird = 1;
+ else {
+ abort_connection(ep, NULL, GFP_KERNEL);
+ err = -ENOMEM;
+ goto err;
+ }
+ }
+ }
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
- if (peer2peer && ep->ird == 0)
- ep->ird = 1;
+ if (ep->mpa_attr.version != 2)
+ if (peer2peer && ep->ird == 0)
+ ep->ird = 1;
PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
+ cm_id->add_ref(cm_id);
+ ep->com.cm_id = cm_id;
+ ep->com.qp = qp;
+
/* bind QP to EP and move to RTS */
attrs.mpa_attr = ep->mpa_attr;
attrs.max_ird = ep->ird;
@@ -1944,6 +2336,8 @@
ep->com.dev->rdev.lldi.nchan;
ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[
cxgb4_port_idx(neigh->dev) * step];
+ ep->retry_with_mpa_v1 = 0;
+ ep->tried_with_mpa_v1 = 0;
}
if (!ep->l2t) {
printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__);
@@ -2323,8 +2717,11 @@
/*
* Wake up any threads in rdma_init() or rdma_fini().
+ * However, this is not needed if com state is just
+ * MPA_REQ_SENT
*/
- c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
+ if (ep->com.state != MPA_REQ_SENT)
+ c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
sched(dev, skb);
return 0;
}
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index 1720dc7..f35a935 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -185,7 +185,7 @@
V_CQE_OPCODE(FW_RI_SEND) |
V_CQE_TYPE(0) |
V_CQE_SWCQE(1) |
- V_CQE_QPID(wq->rq.qid));
+ V_CQE_QPID(wq->sq.qid));
cqe.bits_type_ts = cpu_to_be64(V_CQE_GENBIT((u64)cq->gen));
cq->sw_queue[cq->sw_pidx] = cqe;
t4_swcq_produce(cq);
@@ -818,6 +818,7 @@
chp->cq.size--; /* status page */
chp->ibcq.cqe = entries - 2;
spin_lock_init(&chp->lock);
+ spin_lock_init(&chp->comp_handler_lock);
atomic_set(&chp->refcnt, 1);
init_waitqueue_head(&chp->wait);
ret = insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid);
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index 40a13cc..6d0df6e 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -376,10 +376,8 @@
struct c4iw_dev *dev;
};
-static void c4iw_remove(struct uld_ctx *ctx)
+static void c4iw_dealloc(struct uld_ctx *ctx)
{
- PDBG("%s c4iw_dev %p\n", __func__, ctx->dev);
- c4iw_unregister_device(ctx->dev);
c4iw_rdev_close(&ctx->dev->rdev);
idr_destroy(&ctx->dev->cqidr);
idr_destroy(&ctx->dev->qpidr);
@@ -389,11 +387,30 @@
ctx->dev = NULL;
}
+static void c4iw_remove(struct uld_ctx *ctx)
+{
+ PDBG("%s c4iw_dev %p\n", __func__, ctx->dev);
+ c4iw_unregister_device(ctx->dev);
+ c4iw_dealloc(ctx);
+}
+
+static int rdma_supported(const struct cxgb4_lld_info *infop)
+{
+ return infop->vr->stag.size > 0 && infop->vr->pbl.size > 0 &&
+ infop->vr->rq.size > 0 && infop->vr->qp.size > 0 &&
+ infop->vr->cq.size > 0 && infop->vr->ocq.size > 0;
+}
+
static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
{
struct c4iw_dev *devp;
int ret;
+ if (!rdma_supported(infop)) {
+ printk(KERN_INFO MOD "%s: RDMA not supported on this device.\n",
+ pci_name(infop->pdev));
+ return ERR_PTR(-ENOSYS);
+ }
devp = (struct c4iw_dev *)ib_alloc_device(sizeof(*devp));
if (!devp) {
printk(KERN_ERR MOD "Cannot allocate ib device\n");
@@ -414,7 +431,6 @@
ret = c4iw_rdev_open(&devp->rdev);
if (ret) {
- mutex_unlock(&dev_mutex);
printk(KERN_ERR MOD "Unable to open CXIO rdev err %d\n", ret);
ib_dealloc_device(&devp->ibdev);
return ERR_PTR(ret);
@@ -519,15 +535,24 @@
case CXGB4_STATE_UP:
printk(KERN_INFO MOD "%s: Up\n", pci_name(ctx->lldi.pdev));
if (!ctx->dev) {
- int ret = 0;
+ int ret;
ctx->dev = c4iw_alloc(&ctx->lldi);
- if (!IS_ERR(ctx->dev))
- ret = c4iw_register_device(ctx->dev);
- if (IS_ERR(ctx->dev) || ret)
+ if (IS_ERR(ctx->dev)) {
+ printk(KERN_ERR MOD
+ "%s: initialization failed: %ld\n",
+ pci_name(ctx->lldi.pdev),
+ PTR_ERR(ctx->dev));
+ ctx->dev = NULL;
+ break;
+ }
+ ret = c4iw_register_device(ctx->dev);
+ if (ret) {
printk(KERN_ERR MOD
"%s: RDMA registration failed: %d\n",
pci_name(ctx->lldi.pdev), ret);
+ c4iw_dealloc(ctx);
+ }
}
break;
case CXGB4_STATE_DOWN:
diff --git a/drivers/infiniband/hw/cxgb4/ev.c b/drivers/infiniband/hw/cxgb4/ev.c
index c13041a..397cb36 100644
--- a/drivers/infiniband/hw/cxgb4/ev.c
+++ b/drivers/infiniband/hw/cxgb4/ev.c
@@ -42,6 +42,7 @@
{
struct ib_event event;
struct c4iw_qp_attributes attrs;
+ unsigned long flag;
if ((qhp->attr.state == C4IW_QP_STATE_ERROR) ||
(qhp->attr.state == C4IW_QP_STATE_TERMINATE)) {
@@ -72,7 +73,9 @@
if (qhp->ibqp.event_handler)
(*qhp->ibqp.event_handler)(&event, qhp->ibqp.qp_context);
+ spin_lock_irqsave(&chp->comp_handler_lock, flag);
(*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context);
+ spin_unlock_irqrestore(&chp->comp_handler_lock, flag);
}
void c4iw_ev_dispatch(struct c4iw_dev *dev, struct t4_cqe *err_cqe)
@@ -183,11 +186,14 @@
int c4iw_ev_handler(struct c4iw_dev *dev, u32 qid)
{
struct c4iw_cq *chp;
+ unsigned long flag;
chp = get_chp(dev, qid);
- if (chp)
+ if (chp) {
+ spin_lock_irqsave(&chp->comp_handler_lock, flag);
(*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context);
- else
+ spin_unlock_irqrestore(&chp->comp_handler_lock, flag);
+ } else
PDBG("%s unknown cqid 0x%x\n", __func__, qid);
return 0;
}
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 4f045375..1357c5b 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -309,6 +309,7 @@
struct c4iw_dev *rhp;
struct t4_cq cq;
spinlock_t lock;
+ spinlock_t comp_handler_lock;
atomic_t refcnt;
wait_queue_head_t wait;
};
@@ -323,6 +324,7 @@
u8 recv_marker_enabled;
u8 xmit_marker_enabled;
u8 crc_enabled;
+ u8 enhanced_rdma_conn;
u8 version;
u8 p2p_type;
};
@@ -349,6 +351,8 @@
u8 is_terminate_local;
struct c4iw_mpa_attributes mpa_attr;
struct c4iw_ep *llp_stream_handle;
+ u8 layer_etype;
+ u8 ecode;
};
struct c4iw_qp {
@@ -501,11 +505,18 @@
#define MPA_KEY_REP "MPA ID Rep Frame"
#define MPA_MAX_PRIVATE_DATA 256
+#define MPA_ENHANCED_RDMA_CONN 0x10
#define MPA_REJECT 0x20
#define MPA_CRC 0x40
#define MPA_MARKERS 0x80
#define MPA_FLAGS_MASK 0xE0
+#define MPA_V2_PEER2PEER_MODEL 0x8000
+#define MPA_V2_ZERO_LEN_FPDU_RTR 0x4000
+#define MPA_V2_RDMA_WRITE_RTR 0x8000
+#define MPA_V2_RDMA_READ_RTR 0x4000
+#define MPA_V2_IRD_ORD_MASK 0x3FFF
+
#define c4iw_put_ep(ep) { \
PDBG("put_ep (via %s:%u) ep %p refcnt %d\n", __func__, __LINE__, \
ep, atomic_read(&((ep)->kref.refcount))); \
@@ -528,6 +539,11 @@
u8 private_data[0];
};
+struct mpa_v2_conn_params {
+ __be16 ird;
+ __be16 ord;
+};
+
struct terminate_message {
u8 layer_etype;
u8 ecode;
@@ -580,7 +596,10 @@
enum c4iw_mpa_ecodes {
MPA_CRC_ERR = 0x02,
- MPA_MARKER_ERR = 0x03
+ MPA_MARKER_ERR = 0x03,
+ MPA_LOCAL_CATA = 0x05,
+ MPA_INSUFF_IRD = 0x06,
+ MPA_NOMATCH_RTR = 0x07,
};
enum c4iw_ep_state {
@@ -651,6 +670,8 @@
u16 txq_idx;
u16 ctrlq_idx;
u8 tos;
+ u8 retry_with_mpa_v1;
+ u8 tried_with_mpa_v1;
};
static inline struct c4iw_ep *to_ep(struct iw_cm_id *cm_id)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index a41578e..d6ccc7e 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -917,7 +917,11 @@
wqe->u.terminate.type = FW_RI_TYPE_TERMINATE;
wqe->u.terminate.immdlen = cpu_to_be32(sizeof *term);
term = (struct terminate_message *)wqe->u.terminate.termmsg;
- build_term_codes(err_cqe, &term->layer_etype, &term->ecode);
+ if (qhp->attr.layer_etype == (LAYER_MPA|DDP_LLP)) {
+ term->layer_etype = qhp->attr.layer_etype;
+ term->ecode = qhp->attr.ecode;
+ } else
+ build_term_codes(err_cqe, &term->layer_etype, &term->ecode);
c4iw_ofld_send(&qhp->rhp->rdev, skb);
}
@@ -941,8 +945,11 @@
flushed = c4iw_flush_rq(&qhp->wq, &rchp->cq, count);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&rchp->lock, flag);
- if (flushed)
+ if (flushed) {
+ spin_lock_irqsave(&rchp->comp_handler_lock, flag);
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
+ spin_unlock_irqrestore(&rchp->comp_handler_lock, flag);
+ }
/* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, flag);
@@ -952,13 +959,17 @@
flushed = c4iw_flush_sq(&qhp->wq, &schp->cq, count);
spin_unlock(&qhp->lock);
spin_unlock_irqrestore(&schp->lock, flag);
- if (flushed)
+ if (flushed) {
+ spin_lock_irqsave(&schp->comp_handler_lock, flag);
(*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context);
+ spin_unlock_irqrestore(&schp->comp_handler_lock, flag);
+ }
}
static void flush_qp(struct c4iw_qp *qhp)
{
struct c4iw_cq *rchp, *schp;
+ unsigned long flag;
rchp = get_chp(qhp->rhp, qhp->attr.rcq);
schp = get_chp(qhp->rhp, qhp->attr.scq);
@@ -966,8 +977,16 @@
if (qhp->ibqp.uobject) {
t4_set_wq_in_error(&qhp->wq);
t4_set_cq_in_error(&rchp->cq);
- if (schp != rchp)
+ spin_lock_irqsave(&rchp->comp_handler_lock, flag);
+ (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
+ spin_unlock_irqrestore(&rchp->comp_handler_lock, flag);
+ if (schp != rchp) {
t4_set_cq_in_error(&schp->cq);
+ spin_lock_irqsave(&schp->comp_handler_lock, flag);
+ (*schp->ibcq.comp_handler)(&schp->ibcq,
+ schp->ibcq.cq_context);
+ spin_unlock_irqrestore(&schp->comp_handler_lock, flag);
+ }
return;
}
__flush_qp(qhp, rchp, schp);
@@ -1012,6 +1031,7 @@
static void build_rtr_msg(u8 p2p_type, struct fw_ri_init *init)
{
+ PDBG("%s p2p_type = %d\n", __func__, p2p_type);
memset(&init->u, 0, sizeof init->u);
switch (p2p_type) {
case FW_RI_INIT_P2PTYPE_RDMA_WRITE:
@@ -1206,12 +1226,16 @@
disconnect = 1;
c4iw_get_ep(&qhp->ep->com);
}
+ if (qhp->ibqp.uobject)
+ t4_set_wq_in_error(&qhp->wq);
ret = rdma_fini(rhp, qhp, ep);
if (ret)
goto err;
break;
case C4IW_QP_STATE_TERMINATE:
set_state(qhp, C4IW_QP_STATE_TERMINATE);
+ qhp->attr.layer_etype = attrs->layer_etype;
+ qhp->attr.ecode = attrs->ecode;
if (qhp->ibqp.uobject)
t4_set_wq_in_error(&qhp->wq);
ep = qhp->ep;
@@ -1222,6 +1246,8 @@
break;
case C4IW_QP_STATE_ERROR:
set_state(qhp, C4IW_QP_STATE_ERROR);
+ if (qhp->ibqp.uobject)
+ t4_set_wq_in_error(&qhp->wq);
if (!internal) {
abort = 1;
disconnect = 1;
@@ -1334,7 +1360,10 @@
rhp = qhp->rhp;
attrs.next_state = C4IW_QP_STATE_ERROR;
- c4iw_modify_qp(rhp, qhp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
+ if (qhp->attr.state == C4IW_QP_STATE_TERMINATE)
+ c4iw_modify_qp(rhp, qhp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
+ else
+ c4iw_modify_qp(rhp, qhp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
wait_event(qhp->wait, !qhp->ep);
remove_handle(rhp, &rhp->qpidr, qhp->wq.sq.qid);
diff --git a/drivers/infiniband/hw/ehca/ehca_eq.c b/drivers/infiniband/hw/ehca/ehca_eq.c
index d9b1bb4..818d721 100644
--- a/drivers/infiniband/hw/ehca/ehca_eq.c
+++ b/drivers/infiniband/hw/ehca/ehca_eq.c
@@ -125,7 +125,7 @@
tasklet_init(&eq->interrupt_task, ehca_tasklet_eq, (long)shca);
ret = ibmebus_request_irq(eq->ist, ehca_interrupt_eq,
- IRQF_DISABLED, "ehca_eq",
+ 0, "ehca_eq",
(void *)shca);
if (ret < 0)
ehca_err(ib_dev, "Can't map interrupt handler.");
@@ -133,7 +133,7 @@
tasklet_init(&eq->interrupt_task, ehca_tasklet_neq, (long)shca);
ret = ibmebus_request_irq(eq->ist, ehca_interrupt_neq,
- IRQF_DISABLED, "ehca_neq",
+ 0, "ehca_neq",
(void *)shca);
if (ret < 0)
ehca_err(ib_dev, "Can't map interrupt handler.");
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 32fb342..964f855 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -977,6 +977,9 @@
struct hcp_modify_qp_control_block *mqpcb;
u64 hret, update_mask;
+ if (srq_init_attr->srq_type != IB_SRQT_BASIC)
+ return ERR_PTR(-ENOSYS);
+
/* For common attributes, internal_create_qp() takes its info
* out of qp_init_attr, so copy all common attrs there.
*/
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 7c1eebe..824a4d5 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -34,6 +34,7 @@
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/vmalloc.h>
#include "ipath_kernel.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_srq.c b/drivers/infiniband/hw/ipath/ipath_srq.c
index 386e2c7..2627198 100644
--- a/drivers/infiniband/hw/ipath/ipath_srq.c
+++ b/drivers/infiniband/hw/ipath/ipath_srq.c
@@ -107,6 +107,11 @@
u32 sz;
struct ib_srq *ret;
+ if (srq_init_attr->srq_type != IB_SRQT_BASIC) {
+ ret = ERR_PTR(-ENOSYS);
+ goto done;
+ }
+
if (srq_init_attr->attr.max_wr == 0) {
ret = ERR_PTR(-EINVAL);
goto done;
diff --git a/drivers/infiniband/hw/ipath/ipath_user_pages.c b/drivers/infiniband/hw/ipath/ipath_user_pages.c
index cfed539..dc66c45 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_pages.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_pages.c
@@ -79,7 +79,7 @@
goto bail_release;
}
- current->mm->locked_vm += num_pages;
+ current->mm->pinned_vm += num_pages;
ret = 0;
goto bail;
@@ -178,7 +178,7 @@
__ipath_release_user_pages(p, num_pages, 1);
- current->mm->locked_vm -= num_pages;
+ current->mm->pinned_vm -= num_pages;
up_write(¤t->mm->mmap_sem);
}
@@ -195,7 +195,7 @@
container_of(_work, struct ipath_user_pages_work, work);
down_write(&work->mm->mmap_sem);
- work->mm->locked_vm -= work->num_pages;
+ work->mm->pinned_vm -= work->num_pages;
up_write(&work->mm->mmap_sem);
mmput(work->mm);
kfree(work);
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index fa643f4..77f3dbc 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -128,6 +128,8 @@
(dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_REMOTE_INV) &&
(dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_FAST_REG_WR))
props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
+ if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC)
+ props->device_cap_flags |= IB_DEVICE_XRC;
props->vendor_id = be32_to_cpup((__be32 *) (out_mad->data + 36)) &
0xffffff;
@@ -181,8 +183,12 @@
static int ib_link_query_port(struct ib_device *ibdev, u8 port,
struct ib_port_attr *props,
+ struct ib_smp *in_mad,
struct ib_smp *out_mad)
{
+ int ext_active_speed;
+ int err;
+
props->lid = be16_to_cpup((__be16 *) (out_mad->data + 16));
props->lmc = out_mad->data[34] & 0x7;
props->sm_lid = be16_to_cpup((__be16 *) (out_mad->data + 18));
@@ -203,6 +209,39 @@
props->max_vl_num = out_mad->data[37] >> 4;
props->init_type_reply = out_mad->data[41] >> 4;
+ /* Check if extended speeds (EDR/FDR/...) are supported */
+ if (props->port_cap_flags & IB_PORT_EXTENDED_SPEEDS_SUP) {
+ ext_active_speed = out_mad->data[62] >> 4;
+
+ switch (ext_active_speed) {
+ case 1:
+ props->active_speed = 16; /* FDR */
+ break;
+ case 2:
+ props->active_speed = 32; /* EDR */
+ break;
+ }
+ }
+
+ /* If reported active speed is QDR, check if is FDR-10 */
+ if (props->active_speed == 4) {
+ if (to_mdev(ibdev)->dev->caps.ext_port_cap[port] &
+ MLX_EXT_PORT_CAP_FLAG_EXTENDED_PORT_INFO) {
+ init_query_mad(in_mad);
+ in_mad->attr_id = MLX4_ATTR_EXTENDED_PORT_INFO;
+ in_mad->attr_mod = cpu_to_be32(port);
+
+ err = mlx4_MAD_IFC(to_mdev(ibdev), 1, 1, port,
+ NULL, NULL, in_mad, out_mad);
+ if (err)
+ return err;
+
+ /* Checking LinkSpeedActive for FDR-10 */
+ if (out_mad->data[15] & 0x1)
+ props->active_speed = 8;
+ }
+ }
+
return 0;
}
@@ -227,7 +266,7 @@
props->pkey_tbl_len = 1;
props->bad_pkey_cntr = be16_to_cpup((__be16 *) (out_mad->data + 46));
props->qkey_viol_cntr = be16_to_cpup((__be16 *) (out_mad->data + 48));
- props->max_mtu = IB_MTU_2048;
+ props->max_mtu = IB_MTU_4096;
props->subnet_timeout = 0;
props->max_vl_num = out_mad->data[37] >> 4;
props->init_type_reply = 0;
@@ -274,7 +313,7 @@
goto out;
err = mlx4_ib_port_link_layer(ibdev, port) == IB_LINK_LAYER_INFINIBAND ?
- ib_link_query_port(ibdev, port, props, out_mad) :
+ ib_link_query_port(ibdev, port, props, in_mad, out_mad) :
eth_link_query_port(ibdev, port, props, out_mad);
out:
@@ -566,6 +605,57 @@
return 0;
}
+static struct ib_xrcd *mlx4_ib_alloc_xrcd(struct ib_device *ibdev,
+ struct ib_ucontext *context,
+ struct ib_udata *udata)
+{
+ struct mlx4_ib_xrcd *xrcd;
+ int err;
+
+ if (!(to_mdev(ibdev)->dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC))
+ return ERR_PTR(-ENOSYS);
+
+ xrcd = kmalloc(sizeof *xrcd, GFP_KERNEL);
+ if (!xrcd)
+ return ERR_PTR(-ENOMEM);
+
+ err = mlx4_xrcd_alloc(to_mdev(ibdev)->dev, &xrcd->xrcdn);
+ if (err)
+ goto err1;
+
+ xrcd->pd = ib_alloc_pd(ibdev);
+ if (IS_ERR(xrcd->pd)) {
+ err = PTR_ERR(xrcd->pd);
+ goto err2;
+ }
+
+ xrcd->cq = ib_create_cq(ibdev, NULL, NULL, xrcd, 1, 0);
+ if (IS_ERR(xrcd->cq)) {
+ err = PTR_ERR(xrcd->cq);
+ goto err3;
+ }
+
+ return &xrcd->ibxrcd;
+
+err3:
+ ib_dealloc_pd(xrcd->pd);
+err2:
+ mlx4_xrcd_free(to_mdev(ibdev)->dev, xrcd->xrcdn);
+err1:
+ kfree(xrcd);
+ return ERR_PTR(err);
+}
+
+static int mlx4_ib_dealloc_xrcd(struct ib_xrcd *xrcd)
+{
+ ib_destroy_cq(to_mxrcd(xrcd)->cq);
+ ib_dealloc_pd(to_mxrcd(xrcd)->pd);
+ mlx4_xrcd_free(to_mdev(xrcd->device)->dev, to_mxrcd(xrcd)->xrcdn);
+ kfree(xrcd);
+
+ return 0;
+}
+
static int add_gid_entry(struct ib_qp *ibqp, union ib_gid *gid)
{
struct mlx4_ib_qp *mqp = to_mqp(ibqp);
@@ -1044,7 +1134,9 @@
(1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
(1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
(1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ);
+ (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_XSRQ) |
+ (1ull << IB_USER_VERBS_CMD_OPEN_QP);
ibdev->ib_dev.query_device = mlx4_ib_query_device;
ibdev->ib_dev.query_port = mlx4_ib_query_port;
@@ -1093,6 +1185,14 @@
ibdev->ib_dev.unmap_fmr = mlx4_ib_unmap_fmr;
ibdev->ib_dev.dealloc_fmr = mlx4_ib_fmr_dealloc;
+ if (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) {
+ ibdev->ib_dev.alloc_xrcd = mlx4_ib_alloc_xrcd;
+ ibdev->ib_dev.dealloc_xrcd = mlx4_ib_dealloc_xrcd;
+ ibdev->ib_dev.uverbs_cmd_mask |=
+ (1ull << IB_USER_VERBS_CMD_OPEN_XRCD) |
+ (1ull << IB_USER_VERBS_CMD_CLOSE_XRCD);
+ }
+
spin_lock_init(&iboe->lock);
if (init_node_data(ibdev))
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index e4bf2cf..ed80345 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -56,6 +56,13 @@
u32 pdn;
};
+struct mlx4_ib_xrcd {
+ struct ib_xrcd ibxrcd;
+ u32 xrcdn;
+ struct ib_pd *pd;
+ struct ib_cq *cq;
+};
+
struct mlx4_ib_cq_buf {
struct mlx4_buf buf;
struct mlx4_mtt mtt;
@@ -138,6 +145,7 @@
struct mlx4_mtt mtt;
int buf_size;
struct mutex mutex;
+ u16 xrcdn;
u32 flags;
u8 port;
u8 alt_port;
@@ -211,6 +219,11 @@
return container_of(ibpd, struct mlx4_ib_pd, ibpd);
}
+static inline struct mlx4_ib_xrcd *to_mxrcd(struct ib_xrcd *ibxrcd)
+{
+ return container_of(ibxrcd, struct mlx4_ib_xrcd, ibxrcd);
+}
+
static inline struct mlx4_ib_cq *to_mcq(struct ib_cq *ibcq)
{
return container_of(ibcq, struct mlx4_ib_cq, ibcq);
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 3a91d9d..a16f0c8 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -302,15 +302,14 @@
}
static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
- int is_user, int has_srq, struct mlx4_ib_qp *qp)
+ int is_user, int has_rq, struct mlx4_ib_qp *qp)
{
/* Sanity check RQ size before proceeding */
if (cap->max_recv_wr > dev->dev->caps.max_wqes ||
cap->max_recv_sge > dev->dev->caps.max_rq_sg)
return -EINVAL;
- if (has_srq) {
- /* QPs attached to an SRQ should have no RQ */
+ if (!has_rq) {
if (cap->max_recv_wr)
return -EINVAL;
@@ -463,6 +462,14 @@
return 0;
}
+static int qp_has_rq(struct ib_qp_init_attr *attr)
+{
+ if (attr->qp_type == IB_QPT_XRC_INI || attr->qp_type == IB_QPT_XRC_TGT)
+ return 0;
+
+ return !attr->srq;
+}
+
static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,
struct ib_qp_init_attr *init_attr,
struct ib_udata *udata, int sqpn, struct mlx4_ib_qp *qp)
@@ -479,7 +486,7 @@
if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR)
qp->sq_signal_bits = cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE);
- err = set_rq_size(dev, &init_attr->cap, !!pd->uobject, !!init_attr->srq, qp);
+ err = set_rq_size(dev, &init_attr->cap, !!pd->uobject, qp_has_rq(init_attr), qp);
if (err)
goto err;
@@ -513,7 +520,7 @@
if (err)
goto err_mtt;
- if (!init_attr->srq) {
+ if (qp_has_rq(init_attr)) {
err = mlx4_ib_db_map_user(to_mucontext(pd->uobject->context),
ucmd.db_addr, &qp->db);
if (err)
@@ -532,7 +539,7 @@
if (err)
goto err;
- if (!init_attr->srq) {
+ if (qp_has_rq(init_attr)) {
err = mlx4_db_alloc(dev->dev, &qp->db, 0);
if (err)
goto err;
@@ -575,6 +582,9 @@
if (err)
goto err_qpn;
+ if (init_attr->qp_type == IB_QPT_XRC_TGT)
+ qp->mqp.qpn |= (1 << 23);
+
/*
* Hardware wants QPN written in big-endian order (after
* shifting) for send doorbell. Precompute this value to save
@@ -592,9 +602,8 @@
err_wrid:
if (pd->uobject) {
- if (!init_attr->srq)
- mlx4_ib_db_unmap_user(to_mucontext(pd->uobject->context),
- &qp->db);
+ if (qp_has_rq(init_attr))
+ mlx4_ib_db_unmap_user(to_mucontext(pd->uobject->context), &qp->db);
} else {
kfree(qp->sq.wrid);
kfree(qp->rq.wrid);
@@ -610,7 +619,7 @@
mlx4_buf_free(dev->dev, qp->buf_size, &qp->buf);
err_db:
- if (!pd->uobject && !init_attr->srq)
+ if (!pd->uobject && qp_has_rq(init_attr))
mlx4_db_free(dev->dev, &qp->db);
err:
@@ -671,6 +680,33 @@
}
}
+static struct mlx4_ib_pd *get_pd(struct mlx4_ib_qp *qp)
+{
+ if (qp->ibqp.qp_type == IB_QPT_XRC_TGT)
+ return to_mpd(to_mxrcd(qp->ibqp.xrcd)->pd);
+ else
+ return to_mpd(qp->ibqp.pd);
+}
+
+static void get_cqs(struct mlx4_ib_qp *qp,
+ struct mlx4_ib_cq **send_cq, struct mlx4_ib_cq **recv_cq)
+{
+ switch (qp->ibqp.qp_type) {
+ case IB_QPT_XRC_TGT:
+ *send_cq = to_mcq(to_mxrcd(qp->ibqp.xrcd)->cq);
+ *recv_cq = *send_cq;
+ break;
+ case IB_QPT_XRC_INI:
+ *send_cq = to_mcq(qp->ibqp.send_cq);
+ *recv_cq = *send_cq;
+ break;
+ default:
+ *send_cq = to_mcq(qp->ibqp.send_cq);
+ *recv_cq = to_mcq(qp->ibqp.recv_cq);
+ break;
+ }
+}
+
static void destroy_qp_common(struct mlx4_ib_dev *dev, struct mlx4_ib_qp *qp,
int is_user)
{
@@ -682,8 +718,7 @@
printk(KERN_WARNING "mlx4_ib: modify QP %06x to RESET failed.\n",
qp->mqp.qpn);
- send_cq = to_mcq(qp->ibqp.send_cq);
- recv_cq = to_mcq(qp->ibqp.recv_cq);
+ get_cqs(qp, &send_cq, &recv_cq);
mlx4_ib_lock_cqs(send_cq, recv_cq);
@@ -706,7 +741,7 @@
mlx4_mtt_cleanup(dev->dev, &qp->mtt);
if (is_user) {
- if (!qp->ibqp.srq)
+ if (qp->rq.wqe_cnt)
mlx4_ib_db_unmap_user(to_mucontext(qp->ibqp.uobject->context),
&qp->db);
ib_umem_release(qp->umem);
@@ -714,7 +749,7 @@
kfree(qp->sq.wrid);
kfree(qp->rq.wrid);
mlx4_buf_free(dev->dev, qp->buf_size, &qp->buf);
- if (!qp->ibqp.srq)
+ if (qp->rq.wqe_cnt)
mlx4_db_free(dev->dev, &qp->db);
}
@@ -725,10 +760,10 @@
struct ib_qp_init_attr *init_attr,
struct ib_udata *udata)
{
- struct mlx4_ib_dev *dev = to_mdev(pd->device);
struct mlx4_ib_sqp *sqp;
struct mlx4_ib_qp *qp;
int err;
+ u16 xrcdn = 0;
/*
* We only support LSO and multicast loopback blocking, and
@@ -739,10 +774,20 @@
return ERR_PTR(-EINVAL);
if (init_attr->create_flags &&
- (pd->uobject || init_attr->qp_type != IB_QPT_UD))
+ (udata || init_attr->qp_type != IB_QPT_UD))
return ERR_PTR(-EINVAL);
switch (init_attr->qp_type) {
+ case IB_QPT_XRC_TGT:
+ pd = to_mxrcd(init_attr->xrcd)->pd;
+ xrcdn = to_mxrcd(init_attr->xrcd)->xrcdn;
+ init_attr->send_cq = to_mxrcd(init_attr->xrcd)->cq;
+ /* fall through */
+ case IB_QPT_XRC_INI:
+ if (!(to_mdev(pd->device)->dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC))
+ return ERR_PTR(-ENOSYS);
+ init_attr->recv_cq = init_attr->send_cq;
+ /* fall through */
case IB_QPT_RC:
case IB_QPT_UC:
case IB_QPT_UD:
@@ -751,13 +796,14 @@
if (!qp)
return ERR_PTR(-ENOMEM);
- err = create_qp_common(dev, pd, init_attr, udata, 0, qp);
+ err = create_qp_common(to_mdev(pd->device), pd, init_attr, udata, 0, qp);
if (err) {
kfree(qp);
return ERR_PTR(err);
}
qp->ibqp.qp_num = qp->mqp.qpn;
+ qp->xrcdn = xrcdn;
break;
}
@@ -765,7 +811,7 @@
case IB_QPT_GSI:
{
/* Userspace is not allowed to create special QPs: */
- if (pd->uobject)
+ if (udata)
return ERR_PTR(-EINVAL);
sqp = kzalloc(sizeof *sqp, GFP_KERNEL);
@@ -774,8 +820,8 @@
qp = &sqp->qp;
- err = create_qp_common(dev, pd, init_attr, udata,
- dev->dev->caps.sqp_start +
+ err = create_qp_common(to_mdev(pd->device), pd, init_attr, udata,
+ to_mdev(pd->device)->dev->caps.sqp_start +
(init_attr->qp_type == IB_QPT_SMI ? 0 : 2) +
init_attr->port_num - 1,
qp);
@@ -801,11 +847,13 @@
{
struct mlx4_ib_dev *dev = to_mdev(qp->device);
struct mlx4_ib_qp *mqp = to_mqp(qp);
+ struct mlx4_ib_pd *pd;
if (is_qp0(dev, mqp))
mlx4_CLOSE_PORT(dev->dev, mqp->port);
- destroy_qp_common(dev, mqp, !!qp->pd->uobject);
+ pd = get_pd(mqp);
+ destroy_qp_common(dev, mqp, !!pd->ibpd.uobject);
if (is_sqp(dev, mqp))
kfree(to_msqp(mqp));
@@ -821,6 +869,8 @@
case IB_QPT_RC: return MLX4_QP_ST_RC;
case IB_QPT_UC: return MLX4_QP_ST_UC;
case IB_QPT_UD: return MLX4_QP_ST_UD;
+ case IB_QPT_XRC_INI:
+ case IB_QPT_XRC_TGT: return MLX4_QP_ST_XRC;
case IB_QPT_SMI:
case IB_QPT_GSI: return MLX4_QP_ST_MLX;
default: return -1;
@@ -959,6 +1009,8 @@
{
struct mlx4_ib_dev *dev = to_mdev(ibqp->device);
struct mlx4_ib_qp *qp = to_mqp(ibqp);
+ struct mlx4_ib_pd *pd;
+ struct mlx4_ib_cq *send_cq, *recv_cq;
struct mlx4_qp_context *context;
enum mlx4_qp_optpar optpar = 0;
int sqd_event;
@@ -1014,8 +1066,10 @@
context->sq_size_stride = ilog2(qp->sq.wqe_cnt) << 3;
context->sq_size_stride |= qp->sq.wqe_shift - 4;
- if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT)
+ if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) {
context->sq_size_stride |= !!qp->sq_no_prefetch << 7;
+ context->xrcd = cpu_to_be32((u32) qp->xrcdn);
+ }
if (qp->ibqp.uobject)
context->usr_page = cpu_to_be32(to_mucontext(ibqp->uobject->context)->uar.index);
@@ -1079,8 +1133,12 @@
optpar |= MLX4_QP_OPTPAR_ALT_ADDR_PATH;
}
- context->pd = cpu_to_be32(to_mpd(ibqp->pd)->pdn);
- context->params1 = cpu_to_be32(MLX4_IB_ACK_REQ_FREQ << 28);
+ pd = get_pd(qp);
+ get_cqs(qp, &send_cq, &recv_cq);
+ context->pd = cpu_to_be32(pd->pdn);
+ context->cqn_send = cpu_to_be32(send_cq->mcq.cqn);
+ context->cqn_recv = cpu_to_be32(recv_cq->mcq.cqn);
+ context->params1 = cpu_to_be32(MLX4_IB_ACK_REQ_FREQ << 28);
/* Set "fast registration enabled" for all kernel QPs */
if (!qp->ibqp.uobject)
@@ -1106,8 +1164,6 @@
if (attr_mask & IB_QP_SQ_PSN)
context->next_send_psn = cpu_to_be32(attr->sq_psn);
- context->cqn_send = cpu_to_be32(to_mcq(ibqp->send_cq)->mcq.cqn);
-
if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) {
if (attr->max_dest_rd_atomic)
context->params2 |=
@@ -1130,8 +1186,6 @@
if (attr_mask & IB_QP_RQ_PSN)
context->rnr_nextrecvpsn |= cpu_to_be32(attr->rq_psn);
- context->cqn_recv = cpu_to_be32(to_mcq(ibqp->recv_cq)->mcq.cqn);
-
if (attr_mask & IB_QP_QKEY) {
context->qkey = cpu_to_be32(attr->qkey);
optpar |= MLX4_QP_OPTPAR_Q_KEY;
@@ -1140,7 +1194,7 @@
if (ibqp->srq)
context->srqn = cpu_to_be32(1 << 24 | to_msrq(ibqp->srq)->msrq.srqn);
- if (!ibqp->srq && cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT)
+ if (qp->rq.wqe_cnt && cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT)
context->db_rec_addr = cpu_to_be64(qp->db.dma);
if (cur_state == IB_QPS_INIT &&
@@ -1225,17 +1279,17 @@
* entries and reinitialize the QP.
*/
if (new_state == IB_QPS_RESET && !ibqp->uobject) {
- mlx4_ib_cq_clean(to_mcq(ibqp->recv_cq), qp->mqp.qpn,
+ mlx4_ib_cq_clean(recv_cq, qp->mqp.qpn,
ibqp->srq ? to_msrq(ibqp->srq): NULL);
- if (ibqp->send_cq != ibqp->recv_cq)
- mlx4_ib_cq_clean(to_mcq(ibqp->send_cq), qp->mqp.qpn, NULL);
+ if (send_cq != recv_cq)
+ mlx4_ib_cq_clean(send_cq, qp->mqp.qpn, NULL);
qp->rq.head = 0;
qp->rq.tail = 0;
qp->sq.head = 0;
qp->sq.tail = 0;
qp->sq_next_wqe = 0;
- if (!ibqp->srq)
+ if (qp->rq.wqe_cnt)
*qp->db.db = 0;
}
@@ -1547,14 +1601,13 @@
}
static void set_datagram_seg(struct mlx4_wqe_datagram_seg *dseg,
- struct ib_send_wr *wr, __be16 *vlan)
+ struct ib_send_wr *wr)
{
memcpy(dseg->av, &to_mah(wr->wr.ud.ah)->av, sizeof (struct mlx4_av));
dseg->dqpn = cpu_to_be32(wr->wr.ud.remote_qpn);
dseg->qkey = cpu_to_be32(wr->wr.ud.remote_qkey);
dseg->vlan = to_mah(wr->wr.ud.ah)->av.eth.vlan;
memcpy(dseg->mac, to_mah(wr->wr.ud.ah)->av.eth.mac, 6);
- *vlan = dseg->vlan;
}
static void set_mlx_icrc_seg(void *dseg)
@@ -1657,7 +1710,6 @@
__be32 uninitialized_var(lso_hdr_sz);
__be32 blh;
int i;
- __be16 vlan = cpu_to_be16(0xffff);
spin_lock_irqsave(&qp->sq.lock, flags);
@@ -1761,7 +1813,7 @@
break;
case IB_QPT_UD:
- set_datagram_seg(wqe, wr, &vlan);
+ set_datagram_seg(wqe, wr);
wqe += sizeof (struct mlx4_wqe_datagram_seg);
size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
@@ -1824,11 +1876,6 @@
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;
- if (be16_to_cpu(vlan) < 0x1000) {
- ctrl->ins_vlan = 1 << 6;
- ctrl->vlan_tag = vlan;
- }
-
/*
* Make sure descriptor is fully written before
* setting ownership bit (because HW can start
diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c
index 818b7ec..39542f3 100644
--- a/drivers/infiniband/hw/mlx4/srq.c
+++ b/drivers/infiniband/hw/mlx4/srq.c
@@ -76,6 +76,8 @@
struct mlx4_ib_srq *srq;
struct mlx4_wqe_srq_next_seg *next;
struct mlx4_wqe_data_seg *scatter;
+ u32 cqn;
+ u16 xrcdn;
int desc_size;
int buf_size;
int err;
@@ -174,12 +176,18 @@
}
}
- err = mlx4_srq_alloc(dev->dev, to_mpd(pd)->pdn, &srq->mtt,
+ cqn = (init_attr->srq_type == IB_SRQT_XRC) ?
+ to_mcq(init_attr->ext.xrc.cq)->mcq.cqn : 0;
+ xrcdn = (init_attr->srq_type == IB_SRQT_XRC) ?
+ to_mxrcd(init_attr->ext.xrc.xrcd)->xrcdn :
+ (u16) dev->dev->caps.reserved_xrcds;
+ err = mlx4_srq_alloc(dev->dev, to_mpd(pd)->pdn, cqn, xrcdn, &srq->mtt,
srq->db.dma, &srq->msrq);
if (err)
goto err_wrid;
srq->msrq.event = mlx4_ib_srq_event;
+ srq->ibsrq.ext.xrc.srq_num = srq->msrq.srqn;
if (pd->uobject)
if (ib_copy_to_udata(udata, &srq->msrq.srqn, sizeof (__u32))) {
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 365fe0e..cb9a0b9 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -438,6 +438,9 @@
struct mthca_srq *srq;
int err;
+ if (init_attr->srq_type != IB_SRQT_BASIC)
+ return ERR_PTR(-ENOSYS);
+
srq = kmalloc(sizeof *srq, GFP_KERNEL);
if (!srq)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/infiniband/hw/nes/Makefile b/drivers/infiniband/hw/nes/Makefile
index 3514851..97820c2 100644
--- a/drivers/infiniband/hw/nes/Makefile
+++ b/drivers/infiniband/hw/nes/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_INFINIBAND_NES) += iw_nes.o
-iw_nes-objs := nes.o nes_hw.o nes_nic.o nes_utils.o nes_verbs.o nes_cm.o
+iw_nes-objs := nes.o nes_hw.o nes_nic.o nes_utils.o nes_verbs.o nes_cm.o nes_mgt.o
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 2d668c6..5965b3d 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -84,7 +84,7 @@
MODULE_PARM_DESC(send_first, "Send RDMA Message First on Active Connection");
-unsigned int nes_drv_opt = 0;
+unsigned int nes_drv_opt = NES_DRV_OPT_DISABLE_INT_MOD | NES_DRV_OPT_ENABLE_PAU;
module_param(nes_drv_opt, int, 0644);
MODULE_PARM_DESC(nes_drv_opt, "Driver option parameters");
@@ -130,9 +130,6 @@
.notifier_call = nes_net_event
};
-
-
-
/**
* nes_inetaddr_event
*/
@@ -321,6 +318,9 @@
}
if (atomic_dec_and_test(&nesqp->refcount)) {
+ if (nesqp->pau_mode)
+ nes_destroy_pau_qp(nesdev, nesqp);
+
/* Destroy the QP */
cqp_request = nes_get_cqp_request(nesdev);
if (cqp_request == NULL) {
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 6fe7987..568b4f1 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -102,6 +102,7 @@
#define NES_DRV_OPT_NO_INLINE_DATA 0x00000080
#define NES_DRV_OPT_DISABLE_INT_MOD 0x00000100
#define NES_DRV_OPT_DISABLE_VIRT_WQ 0x00000200
+#define NES_DRV_OPT_ENABLE_PAU 0x00000400
#define NES_AEQ_EVENT_TIMEOUT 2500
#define NES_DISCONNECT_EVENT_TIMEOUT 2000
@@ -128,6 +129,7 @@
#define NES_DBG_IW_RX 0x00020000
#define NES_DBG_IW_TX 0x00040000
#define NES_DBG_SHUTDOWN 0x00080000
+#define NES_DBG_PAU 0x00100000
#define NES_DBG_RSVD1 0x10000000
#define NES_DBG_RSVD2 0x20000000
#define NES_DBG_RSVD3 0x40000000
@@ -162,6 +164,7 @@
#include "nes_context.h"
#include "nes_user.h"
#include "nes_cm.h"
+#include "nes_mgt.h"
extern int max_mtu;
#define max_frame_len (max_mtu+ETH_HLEN)
@@ -202,6 +205,8 @@
extern atomic_t cm_nodes_destroyed;
extern atomic_t cm_accel_dropped_pkts;
extern atomic_t cm_resets_recvd;
+extern atomic_t pau_qps_created;
+extern atomic_t pau_qps_destroyed;
extern u32 int_mod_timer_init;
extern u32 int_mod_cq_depth_256;
@@ -273,6 +278,14 @@
u8 link_recheck;
};
+/* Receive skb private area - must fit in skb->cb area */
+struct nes_rskb_cb {
+ u64 busaddr;
+ u32 maplen;
+ u32 seqnum;
+ u8 *data_start;
+ struct nes_qp *nesqp;
+};
static inline __le32 get_crc_value(struct nes_v4_quad *nes_quad)
{
@@ -305,8 +318,8 @@
static inline void
nes_fill_init_cqp_wqe(struct nes_hw_cqp_wqe *cqp_wqe, struct nes_device *nesdev)
{
- set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_COMP_CTX_LOW_IDX,
- (u64)((unsigned long) &nesdev->cqp));
+ cqp_wqe->wqe_words[NES_CQP_WQE_COMP_CTX_LOW_IDX] = 0;
+ cqp_wqe->wqe_words[NES_CQP_WQE_COMP_CTX_HIGH_IDX] = 0;
cqp_wqe->wqe_words[NES_CQP_WQE_COMP_SCRATCH_LOW_IDX] = 0;
cqp_wqe->wqe_words[NES_CQP_WQE_COMP_SCRATCH_HIGH_IDX] = 0;
cqp_wqe->wqe_words[NES_CQP_STAG_WQE_PBL_BLK_COUNT_IDX] = 0;
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index c118663..dfce9ea 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -77,26 +77,19 @@
atomic_t cm_accel_dropped_pkts;
atomic_t cm_resets_recvd;
-static inline int mini_cm_accelerated(struct nes_cm_core *,
- struct nes_cm_node *);
-static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *,
- struct nes_vnic *, struct nes_cm_info *);
+static inline int mini_cm_accelerated(struct nes_cm_core *, struct nes_cm_node *);
+static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *, struct nes_vnic *, struct nes_cm_info *);
static int mini_cm_del_listen(struct nes_cm_core *, struct nes_cm_listener *);
-static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *,
- struct nes_vnic *, u16, void *, struct nes_cm_info *);
+static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *, struct nes_vnic *, u16, void *, struct nes_cm_info *);
static int mini_cm_close(struct nes_cm_core *, struct nes_cm_node *);
-static int mini_cm_accept(struct nes_cm_core *, struct ietf_mpa_frame *,
- struct nes_cm_node *);
-static int mini_cm_reject(struct nes_cm_core *, struct ietf_mpa_frame *,
- struct nes_cm_node *);
-static int mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *,
- struct sk_buff *);
+static int mini_cm_accept(struct nes_cm_core *, struct nes_cm_node *);
+static int mini_cm_reject(struct nes_cm_core *, struct nes_cm_node *);
+static int mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *, struct sk_buff *);
static int mini_cm_dealloc_core(struct nes_cm_core *);
static int mini_cm_get(struct nes_cm_core *);
static int mini_cm_set(struct nes_cm_core *, u32, u32);
-static void form_cm_frame(struct sk_buff *, struct nes_cm_node *,
- void *, u32, void *, u32, u8);
+static void form_cm_frame(struct sk_buff *, struct nes_cm_node *, void *, u32, void *, u32, u8);
static int add_ref_cm_node(struct nes_cm_node *);
static int rem_ref_cm_node(struct nes_cm_core *, struct nes_cm_node *);
@@ -111,16 +104,14 @@
static int send_reset(struct nes_cm_node *, struct sk_buff *);
static int send_ack(struct nes_cm_node *cm_node, struct sk_buff *skb);
static int send_fin(struct nes_cm_node *cm_node, struct sk_buff *skb);
-static void process_packet(struct nes_cm_node *, struct sk_buff *,
- struct nes_cm_core *);
+static void process_packet(struct nes_cm_node *, struct sk_buff *, struct nes_cm_core *);
static void active_open_err(struct nes_cm_node *, struct sk_buff *, int);
static void passive_open_err(struct nes_cm_node *, struct sk_buff *, int);
static void cleanup_retrans_entry(struct nes_cm_node *);
static void handle_rcv_mpa(struct nes_cm_node *, struct sk_buff *);
static void free_retrans_entry(struct nes_cm_node *cm_node);
-static int handle_tcp_options(struct nes_cm_node *cm_node, struct tcphdr *tcph,
- struct sk_buff *skb, int optionsize, int passive);
+static int handle_tcp_options(struct nes_cm_node *cm_node, struct tcphdr *tcph, struct sk_buff *skb, int optionsize, int passive);
/* CM event handler functions */
static void cm_event_connected(struct nes_cm_event *);
@@ -130,6 +121,12 @@
static void cm_event_mpa_reject(struct nes_cm_event *);
static void handle_recv_entry(struct nes_cm_node *cm_node, u32 rem_node);
+/* MPA build functions */
+static int cm_build_mpa_frame(struct nes_cm_node *, u8 **, u16 *, u8 *, u8);
+static void build_mpa_v2(struct nes_cm_node *, void *, u8);
+static void build_mpa_v1(struct nes_cm_node *, void *, u8);
+static void build_rdma0_msg(struct nes_cm_node *, struct nes_qp **);
+
static void print_core(struct nes_cm_core *core);
/* External CM API Interface */
@@ -159,12 +156,21 @@
atomic_t cm_connect_reqs;
atomic_t cm_rejects;
+int nes_add_ref_cm_node(struct nes_cm_node *cm_node)
+{
+ return add_ref_cm_node(cm_node);
+}
+
+int nes_rem_ref_cm_node(struct nes_cm_node *cm_node)
+{
+ return rem_ref_cm_node(cm_node->cm_core, cm_node);
+}
/**
* create_event
*/
-static struct nes_cm_event *create_event(struct nes_cm_node *cm_node,
- enum nes_cm_event_type type)
+static struct nes_cm_event *create_event(struct nes_cm_node * cm_node,
+ enum nes_cm_event_type type)
{
struct nes_cm_event *event;
@@ -186,10 +192,10 @@
event->cm_info.cm_id = cm_node->cm_id;
nes_debug(NES_DBG_CM, "cm_node=%p Created event=%p, type=%u, "
- "dst_addr=%08x[%x], src_addr=%08x[%x]\n",
- cm_node, event, type, event->cm_info.loc_addr,
- event->cm_info.loc_port, event->cm_info.rem_addr,
- event->cm_info.rem_port);
+ "dst_addr=%08x[%x], src_addr=%08x[%x]\n",
+ cm_node, event, type, event->cm_info.loc_addr,
+ event->cm_info.loc_port, event->cm_info.rem_addr,
+ event->cm_info.rem_port);
nes_cm_post_event(event);
return event;
@@ -201,14 +207,19 @@
*/
static int send_mpa_request(struct nes_cm_node *cm_node, struct sk_buff *skb)
{
+ u8 start_addr = 0;
+ u8 *start_ptr = &start_addr;
+ u8 **start_buff = &start_ptr;
+ u16 buff_len = 0;
+
if (!skb) {
nes_debug(NES_DBG_CM, "skb set to NULL\n");
return -1;
}
/* send an MPA Request frame */
- form_cm_frame(skb, cm_node, NULL, 0, &cm_node->mpa_frame,
- cm_node->mpa_frame_size, SET_ACK);
+ cm_build_mpa_frame(cm_node, start_buff, &buff_len, NULL, MPA_KEY_REQUEST);
+ form_cm_frame(skb, cm_node, NULL, 0, *start_buff, buff_len, SET_ACK);
return schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 1, 0);
}
@@ -217,7 +228,11 @@
static int send_mpa_reject(struct nes_cm_node *cm_node)
{
- struct sk_buff *skb = NULL;
+ struct sk_buff *skb = NULL;
+ u8 start_addr = 0;
+ u8 *start_ptr = &start_addr;
+ u8 **start_buff = &start_ptr;
+ u16 buff_len = 0;
skb = dev_alloc_skb(MAX_CM_BUFFER);
if (!skb) {
@@ -226,8 +241,8 @@
}
/* send an MPA reject frame */
- form_cm_frame(skb, cm_node, NULL, 0, &cm_node->mpa_frame,
- cm_node->mpa_frame_size, SET_ACK | SET_FIN);
+ cm_build_mpa_frame(cm_node, start_buff, &buff_len, NULL, MPA_KEY_REPLY);
+ form_cm_frame(skb, cm_node, NULL, 0, *start_buff, buff_len, SET_ACK | SET_FIN);
cm_node->state = NES_CM_STATE_FIN_WAIT1;
return schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 1, 0);
@@ -239,24 +254,31 @@
* IETF MPA frame
*/
static int parse_mpa(struct nes_cm_node *cm_node, u8 *buffer, u32 *type,
- u32 len)
+ u32 len)
{
- struct ietf_mpa_frame *mpa_frame;
+ struct ietf_mpa_v1 *mpa_frame;
+ struct ietf_mpa_v2 *mpa_v2_frame;
+ struct ietf_rtr_msg *rtr_msg;
+ int mpa_hdr_len;
+ int priv_data_len;
*type = NES_MPA_REQUEST_ACCEPT;
/* assume req frame is in tcp data payload */
- if (len < sizeof(struct ietf_mpa_frame)) {
+ if (len < sizeof(struct ietf_mpa_v1)) {
nes_debug(NES_DBG_CM, "The received ietf buffer was too small (%x)\n", len);
return -EINVAL;
}
- mpa_frame = (struct ietf_mpa_frame *)buffer;
- cm_node->mpa_frame_size = ntohs(mpa_frame->priv_data_len);
+ /* points to the beginning of the frame, which could be MPA V1 or V2 */
+ mpa_frame = (struct ietf_mpa_v1 *)buffer;
+ mpa_hdr_len = sizeof(struct ietf_mpa_v1);
+ priv_data_len = ntohs(mpa_frame->priv_data_len);
+
/* make sure mpa private data len is less than 512 bytes */
- if (cm_node->mpa_frame_size > IETF_MAX_PRIV_DATA_LEN) {
+ if (priv_data_len > IETF_MAX_PRIV_DATA_LEN) {
nes_debug(NES_DBG_CM, "The received Length of Private"
- " Data field exceeds 512 octets\n");
+ " Data field exceeds 512 octets\n");
return -EINVAL;
}
/*
@@ -264,11 +286,22 @@
* received MPA version and MPA key information
*
*/
- if (mpa_frame->rev != mpa_version) {
+ if (mpa_frame->rev != IETF_MPA_V1 && mpa_frame->rev != IETF_MPA_V2) {
nes_debug(NES_DBG_CM, "The received mpa version"
- " can not be interoperated\n");
+ " is not supported\n");
return -EINVAL;
}
+ /*
+ * backwards compatibility only
+ */
+ if (mpa_frame->rev > cm_node->mpa_frame_rev) {
+ nes_debug(NES_DBG_CM, "The received mpa version"
+ " can not be interoperated\n");
+ return -EINVAL;
+ } else {
+ cm_node->mpa_frame_rev = mpa_frame->rev;
+ }
+
if (cm_node->state != NES_CM_STATE_MPAREQ_SENT) {
if (memcmp(mpa_frame->key, IEFT_MPA_KEY_REQ, IETF_MPA_KEY_SIZE)) {
nes_debug(NES_DBG_CM, "Unexpected MPA Key received \n");
@@ -281,25 +314,75 @@
}
}
- if (cm_node->mpa_frame_size + sizeof(struct ietf_mpa_frame) != len) {
+
+ if (priv_data_len + mpa_hdr_len != len) {
nes_debug(NES_DBG_CM, "The received ietf buffer was not right"
- " complete (%x + %x != %x)\n",
- cm_node->mpa_frame_size,
- (u32)sizeof(struct ietf_mpa_frame), len);
+ " complete (%x + %x != %x)\n",
+ priv_data_len, mpa_hdr_len, len);
return -EINVAL;
}
/* make sure it does not exceed the max size */
if (len > MAX_CM_BUFFER) {
nes_debug(NES_DBG_CM, "The received ietf buffer was too large"
- " (%x + %x != %x)\n",
- cm_node->mpa_frame_size,
- (u32)sizeof(struct ietf_mpa_frame), len);
+ " (%x + %x != %x)\n",
+ priv_data_len, mpa_hdr_len, len);
return -EINVAL;
}
+ cm_node->mpa_frame_size = priv_data_len;
+
+ switch (mpa_frame->rev) {
+ case IETF_MPA_V2: {
+ u16 ird_size;
+ u16 ord_size;
+ mpa_v2_frame = (struct ietf_mpa_v2 *)buffer;
+ mpa_hdr_len += IETF_RTR_MSG_SIZE;
+ cm_node->mpa_frame_size -= IETF_RTR_MSG_SIZE;
+ rtr_msg = &mpa_v2_frame->rtr_msg;
+
+ /* parse rtr message */
+ rtr_msg->ctrl_ird = ntohs(rtr_msg->ctrl_ird);
+ rtr_msg->ctrl_ord = ntohs(rtr_msg->ctrl_ord);
+ ird_size = rtr_msg->ctrl_ird & IETF_NO_IRD_ORD;
+ ord_size = rtr_msg->ctrl_ord & IETF_NO_IRD_ORD;
+
+ if (!(rtr_msg->ctrl_ird & IETF_PEER_TO_PEER)) {
+ /* send reset */
+ return -EINVAL;
+ }
+
+ if (cm_node->state != NES_CM_STATE_MPAREQ_SENT) {
+ /* responder */
+ if (cm_node->ord_size > ird_size)
+ cm_node->ord_size = ird_size;
+ } else {
+ /* initiator */
+ if (cm_node->ord_size > ird_size)
+ cm_node->ord_size = ird_size;
+
+ if (cm_node->ird_size < ord_size) {
+ /* no resources available */
+ /* send terminate message */
+ return -EINVAL;
+ }
+ }
+
+ if (rtr_msg->ctrl_ord & IETF_RDMA0_READ) {
+ cm_node->send_rdma0_op = SEND_RDMA_READ_ZERO;
+ } else if (rtr_msg->ctrl_ord & IETF_RDMA0_WRITE) {
+ cm_node->send_rdma0_op = SEND_RDMA_WRITE_ZERO;
+ } else { /* Not supported RDMA0 operation */
+ return -EINVAL;
+ }
+ break;
+ }
+ case IETF_MPA_V1:
+ default:
+ break;
+ }
+
/* copy entire MPA frame to our cm_node's frame */
- memcpy(cm_node->mpa_frame_buf, buffer + sizeof(struct ietf_mpa_frame),
- cm_node->mpa_frame_size);
+ memcpy(cm_node->mpa_frame_buf, buffer + mpa_hdr_len, cm_node->mpa_frame_size);
if (mpa_frame->flags & IETF_MPA_FLAGS_REJECT)
*type = NES_MPA_REQUEST_REJECT;
@@ -312,8 +395,8 @@
* node info to build.
*/
static void form_cm_frame(struct sk_buff *skb,
- struct nes_cm_node *cm_node, void *options, u32 optionsize,
- void *data, u32 datasize, u8 flags)
+ struct nes_cm_node *cm_node, void *options, u32 optionsize,
+ void *data, u32 datasize, u8 flags)
{
struct tcphdr *tcph;
struct iphdr *iph;
@@ -322,14 +405,14 @@
u16 packetsize = sizeof(*iph);
packetsize += sizeof(*tcph);
- packetsize += optionsize + datasize;
+ packetsize += optionsize + datasize;
+ skb_trim(skb, 0);
memset(skb->data, 0x00, ETH_HLEN + sizeof(*iph) + sizeof(*tcph));
- skb->len = 0;
buf = skb_put(skb, packetsize + ETH_HLEN);
- ethh = (struct ethhdr *) buf;
+ ethh = (struct ethhdr *)buf;
buf += ETH_HLEN;
iph = (struct iphdr *)buf;
@@ -337,7 +420,7 @@
tcph = (struct tcphdr *)buf;
skb_reset_mac_header(skb);
skb_set_network_header(skb, ETH_HLEN);
- skb_set_transport_header(skb, ETH_HLEN+sizeof(*iph));
+ skb_set_transport_header(skb, ETH_HLEN + sizeof(*iph));
buf += sizeof(*tcph);
skb->ip_summed = CHECKSUM_PARTIAL;
@@ -350,14 +433,14 @@
ethh->h_proto = htons(0x0800);
iph->version = IPVERSION;
- iph->ihl = 5; /* 5 * 4Byte words, IP headr len */
+ iph->ihl = 5; /* 5 * 4Byte words, IP headr len */
iph->tos = 0;
iph->tot_len = htons(packetsize);
iph->id = htons(++cm_node->tcp_cntxt.loc_id);
iph->frag_off = htons(0x4000);
iph->ttl = 0x40;
- iph->protocol = 0x06; /* IPPROTO_TCP */
+ iph->protocol = 0x06; /* IPPROTO_TCP */
iph->saddr = htonl(cm_node->loc_addr);
iph->daddr = htonl(cm_node->rem_addr);
@@ -370,14 +453,16 @@
cm_node->tcp_cntxt.loc_ack_num = cm_node->tcp_cntxt.rcv_nxt;
tcph->ack_seq = htonl(cm_node->tcp_cntxt.loc_ack_num);
tcph->ack = 1;
- } else
+ } else {
tcph->ack_seq = 0;
+ }
if (flags & SET_SYN) {
cm_node->tcp_cntxt.loc_seq_num++;
tcph->syn = 1;
- } else
+ } else {
cm_node->tcp_cntxt.loc_seq_num += datasize;
+ }
if (flags & SET_FIN) {
cm_node->tcp_cntxt.loc_seq_num++;
@@ -398,10 +483,8 @@
skb_shinfo(skb)->nr_frags = 0;
cm_packets_created++;
-
}
-
/**
* print_core - dump a cm core
*/
@@ -413,7 +496,7 @@
return;
nes_debug(NES_DBG_CM, "---------------------------------------------\n");
- nes_debug(NES_DBG_CM, "State : %u \n", core->state);
+ nes_debug(NES_DBG_CM, "State : %u \n", core->state);
nes_debug(NES_DBG_CM, "Listen Nodes : %u \n", atomic_read(&core->listen_node_cnt));
nes_debug(NES_DBG_CM, "Active Nodes : %u \n", atomic_read(&core->node_cnt));
@@ -423,6 +506,147 @@
nes_debug(NES_DBG_CM, "-------------- end core ---------------\n");
}
+/**
+ * cm_build_mpa_frame - build a MPA V1 frame or MPA V2 frame
+ */
+static int cm_build_mpa_frame(struct nes_cm_node *cm_node, u8 **start_buff,
+ u16 *buff_len, u8 *pci_mem, u8 mpa_key)
+{
+ int ret = 0;
+
+ *start_buff = (pci_mem) ? pci_mem : &cm_node->mpa_frame_buf[0];
+
+ switch (cm_node->mpa_frame_rev) {
+ case IETF_MPA_V1:
+ *start_buff = (u8 *)*start_buff + sizeof(struct ietf_rtr_msg);
+ *buff_len = sizeof(struct ietf_mpa_v1) + cm_node->mpa_frame_size;
+ build_mpa_v1(cm_node, *start_buff, mpa_key);
+ break;
+ case IETF_MPA_V2:
+ *buff_len = sizeof(struct ietf_mpa_v2) + cm_node->mpa_frame_size;
+ build_mpa_v2(cm_node, *start_buff, mpa_key);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/**
+ * build_mpa_v2 - build a MPA V2 frame
+ */
+static void build_mpa_v2(struct nes_cm_node *cm_node,
+ void *start_addr, u8 mpa_key)
+{
+ struct ietf_mpa_v2 *mpa_frame = (struct ietf_mpa_v2 *)start_addr;
+ struct ietf_rtr_msg *rtr_msg = &mpa_frame->rtr_msg;
+
+ /* initialize the upper 5 bytes of the frame */
+ build_mpa_v1(cm_node, start_addr, mpa_key);
+ mpa_frame->flags |= IETF_MPA_V2_FLAG; /* set a bit to indicate MPA V2 */
+ mpa_frame->priv_data_len += htons(IETF_RTR_MSG_SIZE);
+
+ /* initialize RTR msg */
+ rtr_msg->ctrl_ird = (cm_node->ird_size > IETF_NO_IRD_ORD) ?
+ IETF_NO_IRD_ORD : cm_node->ird_size;
+ rtr_msg->ctrl_ord = (cm_node->ord_size > IETF_NO_IRD_ORD) ?
+ IETF_NO_IRD_ORD : cm_node->ord_size;
+
+ rtr_msg->ctrl_ird |= IETF_PEER_TO_PEER;
+ rtr_msg->ctrl_ird |= IETF_FLPDU_ZERO_LEN;
+
+ switch (mpa_key) {
+ case MPA_KEY_REQUEST:
+ rtr_msg->ctrl_ord |= IETF_RDMA0_WRITE;
+ rtr_msg->ctrl_ord |= IETF_RDMA0_READ;
+ break;
+ case MPA_KEY_REPLY:
+ switch (cm_node->send_rdma0_op) {
+ case SEND_RDMA_WRITE_ZERO:
+ rtr_msg->ctrl_ord |= IETF_RDMA0_WRITE;
+ break;
+ case SEND_RDMA_READ_ZERO:
+ rtr_msg->ctrl_ord |= IETF_RDMA0_READ;
+ break;
+ }
+ }
+ rtr_msg->ctrl_ird = htons(rtr_msg->ctrl_ird);
+ rtr_msg->ctrl_ord = htons(rtr_msg->ctrl_ord);
+}
+
+/**
+ * build_mpa_v1 - build a MPA V1 frame
+ */
+static void build_mpa_v1(struct nes_cm_node *cm_node, void *start_addr, u8 mpa_key)
+{
+ struct ietf_mpa_v1 *mpa_frame = (struct ietf_mpa_v1 *)start_addr;
+
+ switch (mpa_key) {
+ case MPA_KEY_REQUEST:
+ memcpy(mpa_frame->key, IEFT_MPA_KEY_REQ, IETF_MPA_KEY_SIZE);
+ break;
+ case MPA_KEY_REPLY:
+ memcpy(mpa_frame->key, IEFT_MPA_KEY_REP, IETF_MPA_KEY_SIZE);
+ break;
+ }
+ mpa_frame->flags = IETF_MPA_FLAGS_CRC;
+ mpa_frame->rev = cm_node->mpa_frame_rev;
+ mpa_frame->priv_data_len = htons(cm_node->mpa_frame_size);
+}
+
+static void build_rdma0_msg(struct nes_cm_node *cm_node, struct nes_qp **nesqp_addr)
+{
+ u64 u64temp;
+ struct nes_qp *nesqp = *nesqp_addr;
+ struct nes_hw_qp_wqe *wqe = &nesqp->hwqp.sq_vbase[0];
+
+ u64temp = (unsigned long)nesqp;
+ u64temp |= NES_SW_CONTEXT_ALIGN >> 1;
+ set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX, u64temp);
+
+ wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = 0;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = 0;
+
+ switch (cm_node->send_rdma0_op) {
+ case SEND_RDMA_WRITE_ZERO:
+ nes_debug(NES_DBG_CM, "Sending first write.\n");
+ wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
+ cpu_to_le32(NES_IWARP_SQ_OP_RDMAW);
+ wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = 0;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = 0;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+ break;
+
+ case SEND_RDMA_READ_ZERO:
+ default:
+ if (cm_node->send_rdma0_op != SEND_RDMA_READ_ZERO) {
+ printk(KERN_ERR "%s[%u]: Unsupported RDMA0 len operation=%u\n",
+ __func__, __LINE__, cm_node->send_rdma0_op);
+ WARN_ON(1);
+ }
+ nes_debug(NES_DBG_CM, "Sending first rdma operation.\n");
+ wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
+ cpu_to_le32(NES_IWARP_SQ_OP_RDMAR);
+ wqe->wqe_words[NES_IWARP_SQ_WQE_RDMA_TO_LOW_IDX] = 1;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_RDMA_TO_HIGH_IDX] = 0;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_RDMA_LENGTH_IDX] = 0;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_RDMA_STAG_IDX] = 1;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 1;
+ break;
+ }
+
+ if (nesqp->sq_kmapped) {
+ nesqp->sq_kmapped = 0;
+ kunmap(nesqp->page);
+ }
+
+ /*use the reserved spot on the WQ for the extra first WQE*/
+ nesqp->nesqp_context->ird_ord_sizes &= cpu_to_le32(~(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+ NES_QPCONTEXT_ORDIRD_WRPDU |
+ NES_QPCONTEXT_ORDIRD_ALSMM));
+ nesqp->skip_lsmm = 1;
+ nesqp->hwqp.sq_tail = 0;
+}
/**
* schedule_nes_timer
@@ -430,10 +654,10 @@
* rem_ref_cm_node(cm_core, cm_node);add_ref_cm_node(cm_node);
*/
int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
- enum nes_timer_type type, int send_retrans,
- int close_when_complete)
+ enum nes_timer_type type, int send_retrans,
+ int close_when_complete)
{
- unsigned long flags;
+ unsigned long flags;
struct nes_cm_core *cm_core = cm_node->cm_core;
struct nes_timer_entry *new_send;
int ret = 0;
@@ -454,7 +678,7 @@
new_send->close_when_complete = close_when_complete;
if (type == NES_TIMER_TYPE_CLOSE) {
- new_send->timetosend += (HZ/10);
+ new_send->timetosend += (HZ / 10);
if (cm_node->recv_entry) {
kfree(new_send);
WARN_ON(1);
@@ -475,7 +699,7 @@
ret = nes_nic_cm_xmit(new_send->skb, cm_node->netdev);
if (ret != NETDEV_TX_OK) {
nes_debug(NES_DBG_CM, "Error sending packet %p "
- "(jiffies = %lu)\n", new_send, jiffies);
+ "(jiffies = %lu)\n", new_send, jiffies);
new_send->timetosend = jiffies;
ret = NETDEV_TX_OK;
} else {
@@ -504,6 +728,7 @@
struct iw_cm_id *cm_id = cm_node->cm_id;
enum nes_cm_node_state state = cm_node->state;
cm_node->state = NES_CM_STATE_CLOSED;
+
switch (state) {
case NES_CM_STATE_SYN_RCVD:
case NES_CM_STATE_CLOSING:
@@ -536,10 +761,10 @@
spin_lock_irqsave(&nesqp->lock, qplockflags);
if (nesqp->cm_id) {
nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, "
- "refcount = %d: HIT A "
- "NES_TIMER_TYPE_CLOSE with something "
- "to do!!!\n", nesqp->hwqp.qp_id, cm_id,
- atomic_read(&nesqp->refcount));
+ "refcount = %d: HIT A "
+ "NES_TIMER_TYPE_CLOSE with something "
+ "to do!!!\n", nesqp->hwqp.qp_id, cm_id,
+ atomic_read(&nesqp->refcount));
nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
nesqp->ibqp_state = IB_QPS_ERR;
@@ -548,10 +773,10 @@
} else {
spin_unlock_irqrestore(&nesqp->lock, qplockflags);
nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, "
- "refcount = %d: HIT A "
- "NES_TIMER_TYPE_CLOSE with nothing "
- "to do!!!\n", nesqp->hwqp.qp_id, cm_id,
- atomic_read(&nesqp->refcount));
+ "refcount = %d: HIT A "
+ "NES_TIMER_TYPE_CLOSE with nothing "
+ "to do!!!\n", nesqp->hwqp.qp_id, cm_id,
+ atomic_read(&nesqp->refcount));
}
} else if (rem_node) {
/* TIME_WAIT state */
@@ -580,11 +805,12 @@
int ret = NETDEV_TX_OK;
struct list_head timer_list;
+
INIT_LIST_HEAD(&timer_list);
spin_lock_irqsave(&cm_core->ht_lock, flags);
list_for_each_safe(list_node, list_core_temp,
- &cm_core->connected_nodes) {
+ &cm_core->connected_nodes) {
cm_node = container_of(list_node, struct nes_cm_node, list);
if ((cm_node->recv_entry) || (cm_node->send_entry)) {
add_ref_cm_node(cm_node);
@@ -595,18 +821,19 @@
list_for_each_safe(list_node, list_core_temp, &timer_list) {
cm_node = container_of(list_node, struct nes_cm_node,
- timer_entry);
+ timer_entry);
recv_entry = cm_node->recv_entry;
if (recv_entry) {
if (time_after(recv_entry->timetosend, jiffies)) {
if (nexttimeout > recv_entry->timetosend ||
- !settimer) {
+ !settimer) {
nexttimeout = recv_entry->timetosend;
settimer = 1;
}
- } else
+ } else {
handle_recv_entry(cm_node, 1);
+ }
}
spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
@@ -617,8 +844,8 @@
if (time_after(send_entry->timetosend, jiffies)) {
if (cm_node->state != NES_CM_STATE_TSA) {
if ((nexttimeout >
- send_entry->timetosend) ||
- !settimer) {
+ send_entry->timetosend) ||
+ !settimer) {
nexttimeout =
send_entry->timetosend;
settimer = 1;
@@ -630,13 +857,13 @@
}
if ((cm_node->state == NES_CM_STATE_TSA) ||
- (cm_node->state == NES_CM_STATE_CLOSED)) {
+ (cm_node->state == NES_CM_STATE_CLOSED)) {
free_retrans_entry(cm_node);
break;
}
if (!send_entry->retranscount ||
- !send_entry->retrycount) {
+ !send_entry->retrycount) {
cm_packets_dropped++;
free_retrans_entry(cm_node);
@@ -645,28 +872,28 @@
nes_retrans_expired(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
spin_lock_irqsave(&cm_node->retrans_list_lock,
- flags);
+ flags);
break;
}
atomic_inc(&send_entry->skb->users);
cm_packets_retrans++;
nes_debug(NES_DBG_CM, "Retransmitting send_entry %p "
- "for node %p, jiffies = %lu, time to send = "
- "%lu, retranscount = %u, send_entry->seq_num = "
- "0x%08X, cm_node->tcp_cntxt.rem_ack_num = "
- "0x%08X\n", send_entry, cm_node, jiffies,
- send_entry->timetosend,
- send_entry->retranscount,
- send_entry->seq_num,
- cm_node->tcp_cntxt.rem_ack_num);
+ "for node %p, jiffies = %lu, time to send = "
+ "%lu, retranscount = %u, send_entry->seq_num = "
+ "0x%08X, cm_node->tcp_cntxt.rem_ack_num = "
+ "0x%08X\n", send_entry, cm_node, jiffies,
+ send_entry->timetosend,
+ send_entry->retranscount,
+ send_entry->seq_num,
+ cm_node->tcp_cntxt.rem_ack_num);
spin_unlock_irqrestore(&cm_node->retrans_list_lock,
- flags);
+ flags);
ret = nes_nic_cm_xmit(send_entry->skb, cm_node->netdev);
spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
if (ret != NETDEV_TX_OK) {
nes_debug(NES_DBG_CM, "rexmit failed for "
- "node=%p\n", cm_node);
+ "node=%p\n", cm_node);
cm_packets_bounced++;
send_entry->retrycount--;
nexttimeout = jiffies + NES_SHORT_TIME;
@@ -676,18 +903,18 @@
cm_packets_sent++;
}
nes_debug(NES_DBG_CM, "Packet Sent: retrans count = "
- "%u, retry count = %u.\n",
- send_entry->retranscount,
- send_entry->retrycount);
+ "%u, retry count = %u.\n",
+ send_entry->retranscount,
+ send_entry->retrycount);
if (send_entry->send_retrans) {
send_entry->retranscount--;
timetosend = (NES_RETRY_TIMEOUT <<
- (NES_DEFAULT_RETRANS - send_entry->retranscount));
+ (NES_DEFAULT_RETRANS - send_entry->retranscount));
send_entry->timetosend = jiffies +
- min(timetosend, NES_MAX_TIMEOUT);
+ min(timetosend, NES_MAX_TIMEOUT);
if (nexttimeout > send_entry->timetosend ||
- !settimer) {
+ !settimer) {
nexttimeout = send_entry->timetosend;
settimer = 1;
}
@@ -696,11 +923,11 @@
close_when_complete =
send_entry->close_when_complete;
nes_debug(NES_DBG_CM, "cm_node=%p state=%d\n",
- cm_node, cm_node->state);
+ cm_node, cm_node->state);
free_retrans_entry(cm_node);
if (close_when_complete)
rem_ref_cm_node(cm_node->cm_core,
- cm_node);
+ cm_node);
}
} while (0);
@@ -710,7 +937,7 @@
if (settimer) {
if (!timer_pending(&cm_core->tcp_timer)) {
- cm_core->tcp_timer.expires = nexttimeout;
+ cm_core->tcp_timer.expires = nexttimeout;
add_timer(&cm_core->tcp_timer);
}
}
@@ -721,13 +948,13 @@
* send_syn
*/
static int send_syn(struct nes_cm_node *cm_node, u32 sendack,
- struct sk_buff *skb)
+ struct sk_buff *skb)
{
int ret;
int flags = SET_SYN;
char optionsbuffer[sizeof(struct option_mss) +
- sizeof(struct option_windowscale) + sizeof(struct option_base) +
- TCP_OPTIONS_PADDING];
+ sizeof(struct option_windowscale) + sizeof(struct option_base) +
+ TCP_OPTIONS_PADDING];
int optionssize = 0;
/* Sending MSS option */
@@ -854,7 +1081,7 @@
* find_node - find a cm node that matches the reference cm node
*/
static struct nes_cm_node *find_node(struct nes_cm_core *cm_core,
- u16 rem_port, nes_addr_t rem_addr, u16 loc_port, nes_addr_t loc_addr)
+ u16 rem_port, nes_addr_t rem_addr, u16 loc_port, nes_addr_t loc_addr)
{
unsigned long flags;
struct list_head *hte;
@@ -868,12 +1095,12 @@
list_for_each_entry(cm_node, hte, list) {
/* compare quad, return node handle if a match */
nes_debug(NES_DBG_CM, "finding node %x:%x =? %x:%x ^ %x:%x =? %x:%x\n",
- cm_node->loc_addr, cm_node->loc_port,
- loc_addr, loc_port,
- cm_node->rem_addr, cm_node->rem_port,
- rem_addr, rem_port);
+ cm_node->loc_addr, cm_node->loc_port,
+ loc_addr, loc_port,
+ cm_node->rem_addr, cm_node->rem_port,
+ rem_addr, rem_port);
if ((cm_node->loc_addr == loc_addr) && (cm_node->loc_port == loc_port) &&
- (cm_node->rem_addr == rem_addr) && (cm_node->rem_port == rem_port)) {
+ (cm_node->rem_addr == rem_addr) && (cm_node->rem_port == rem_port)) {
add_ref_cm_node(cm_node);
spin_unlock_irqrestore(&cm_core->ht_lock, flags);
return cm_node;
@@ -890,7 +1117,7 @@
* find_listener - find a cm node listening on this addr-port pair
*/
static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core,
- nes_addr_t dst_addr, u16 dst_port, enum nes_cm_listener_state listener_state)
+ nes_addr_t dst_addr, u16 dst_port, enum nes_cm_listener_state listener_state)
{
unsigned long flags;
struct nes_cm_listener *listen_node;
@@ -900,9 +1127,9 @@
list_for_each_entry(listen_node, &cm_core->listen_list.list, list) {
/* compare node pair, return node handle if a match */
if (((listen_node->loc_addr == dst_addr) ||
- listen_node->loc_addr == 0x00000000) &&
- (listen_node->loc_port == dst_port) &&
- (listener_state & listen_node->listener_state)) {
+ listen_node->loc_addr == 0x00000000) &&
+ (listen_node->loc_port == dst_port) &&
+ (listener_state & listen_node->listener_state)) {
atomic_inc(&listen_node->ref_count);
spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
return listen_node;
@@ -927,7 +1154,7 @@
return -EINVAL;
nes_debug(NES_DBG_CM, "Adding Node %p to Active Connection HT\n",
- cm_node);
+ cm_node);
spin_lock_irqsave(&cm_core->ht_lock, flags);
@@ -946,7 +1173,7 @@
* mini_cm_dec_refcnt_listen
*/
static int mini_cm_dec_refcnt_listen(struct nes_cm_core *cm_core,
- struct nes_cm_listener *listener, int free_hanging_nodes)
+ struct nes_cm_listener *listener, int free_hanging_nodes)
{
int ret = -EINVAL;
int err = 0;
@@ -957,8 +1184,8 @@
struct list_head reset_list;
nes_debug(NES_DBG_CM, "attempting listener= %p free_nodes= %d, "
- "refcnt=%d\n", listener, free_hanging_nodes,
- atomic_read(&listener->ref_count));
+ "refcnt=%d\n", listener, free_hanging_nodes,
+ atomic_read(&listener->ref_count));
/* free non-accelerated child nodes for this listener */
INIT_LIST_HEAD(&reset_list);
if (free_hanging_nodes) {
@@ -966,7 +1193,7 @@
list_for_each_safe(list_pos, list_temp,
&g_cm_core->connected_nodes) {
cm_node = container_of(list_pos, struct nes_cm_node,
- list);
+ list);
if ((cm_node->listener == listener) &&
(!cm_node->accelerated)) {
add_ref_cm_node(cm_node);
@@ -978,7 +1205,7 @@
list_for_each_safe(list_pos, list_temp, &reset_list) {
cm_node = container_of(list_pos, struct nes_cm_node,
- reset_entry);
+ reset_entry);
{
struct nes_cm_node *loopback = cm_node->loopbackpartner;
enum nes_cm_node_state old_state;
@@ -990,7 +1217,7 @@
err = send_reset(cm_node, NULL);
if (err) {
cm_node->state =
- NES_CM_STATE_CLOSED;
+ NES_CM_STATE_CLOSED;
WARN_ON(1);
} else {
old_state = cm_node->state;
@@ -1035,10 +1262,9 @@
spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
- if (listener->nesvnic) {
+ if (listener->nesvnic)
nes_manage_apbvt(listener->nesvnic, listener->loc_port,
- PCI_FUNC(listener->nesvnic->nesdev->pcidev->devfn), NES_MANAGE_APBVT_DEL);
- }
+ PCI_FUNC(listener->nesvnic->nesdev->pcidev->devfn), NES_MANAGE_APBVT_DEL);
nes_debug(NES_DBG_CM, "destroying listener (%p)\n", listener);
@@ -1052,8 +1278,8 @@
if (listener) {
if (atomic_read(&listener->pend_accepts_cnt) > 0)
nes_debug(NES_DBG_CM, "destroying listener (%p)"
- " with non-zero pending accepts=%u\n",
- listener, atomic_read(&listener->pend_accepts_cnt));
+ " with non-zero pending accepts=%u\n",
+ listener, atomic_read(&listener->pend_accepts_cnt));
}
return ret;
@@ -1064,7 +1290,7 @@
* mini_cm_del_listen
*/
static int mini_cm_del_listen(struct nes_cm_core *cm_core,
- struct nes_cm_listener *listener)
+ struct nes_cm_listener *listener)
{
listener->listener_state = NES_CM_LISTENER_PASSIVE_STATE;
listener->cm_id = NULL; /* going to be destroyed pretty soon */
@@ -1076,9 +1302,10 @@
* mini_cm_accelerated
*/
static inline int mini_cm_accelerated(struct nes_cm_core *cm_core,
- struct nes_cm_node *cm_node)
+ struct nes_cm_node *cm_node)
{
u32 was_timer_set;
+
cm_node->accelerated = 1;
if (cm_node->accept_pend) {
@@ -1112,7 +1339,7 @@
rt = ip_route_output(&init_net, htonl(dst_ip), 0, 0, 0);
if (IS_ERR(rt)) {
printk(KERN_ERR "%s: ip_route_output_key failed for 0x%08X\n",
- __func__, dst_ip);
+ __func__, dst_ip);
return rc;
}
@@ -1130,7 +1357,7 @@
if (arpindex >= 0) {
if (!memcmp(nesadapter->arp_table[arpindex].mac_addr,
- neigh->ha, ETH_ALEN)){
+ neigh->ha, ETH_ALEN)) {
/* Mac address same as in nes_arp_table */
neigh_release(neigh);
ip_rt_put(rt);
@@ -1138,8 +1365,8 @@
}
nes_manage_arp_cache(nesvnic->netdev,
- nesadapter->arp_table[arpindex].mac_addr,
- dst_ip, NES_ARP_DELETE);
+ nesadapter->arp_table[arpindex].mac_addr,
+ dst_ip, NES_ARP_DELETE);
}
nes_manage_arp_cache(nesvnic->netdev, neigh->ha,
@@ -1161,8 +1388,8 @@
* make_cm_node - create a new instance of a cm node
*/
static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core,
- struct nes_vnic *nesvnic, struct nes_cm_info *cm_info,
- struct nes_cm_listener *listener)
+ struct nes_vnic *nesvnic, struct nes_cm_info *cm_info,
+ struct nes_cm_listener *listener)
{
struct nes_cm_node *cm_node;
struct timespec ts;
@@ -1181,7 +1408,12 @@
cm_node->rem_addr = cm_info->rem_addr;
cm_node->loc_port = cm_info->loc_port;
cm_node->rem_port = cm_info->rem_port;
- cm_node->send_write0 = send_first;
+
+ cm_node->mpa_frame_rev = mpa_version;
+ cm_node->send_rdma0_op = SEND_RDMA_READ_ZERO;
+ cm_node->ird_size = IETF_NO_IRD_ORD;
+ cm_node->ord_size = IETF_NO_IRD_ORD;
+
nes_debug(NES_DBG_CM, "Make node addresses : loc = %pI4:%x, rem = %pI4:%x\n",
&cm_node->loc_addr, cm_node->loc_port,
&cm_node->rem_addr, cm_node->rem_port);
@@ -1191,7 +1423,7 @@
memcpy(cm_node->loc_mac, nesvnic->netdev->dev_addr, ETH_ALEN);
nes_debug(NES_DBG_CM, "listener=%p, cm_id=%p\n", cm_node->listener,
- cm_node->cm_id);
+ cm_node->cm_id);
spin_lock_init(&cm_node->retrans_list_lock);
@@ -1202,11 +1434,11 @@
cm_node->tcp_cntxt.loc_id = NES_CM_DEF_LOCAL_ID;
cm_node->tcp_cntxt.rcv_wscale = NES_CM_DEFAULT_RCV_WND_SCALE;
cm_node->tcp_cntxt.rcv_wnd = NES_CM_DEFAULT_RCV_WND_SCALED >>
- NES_CM_DEFAULT_RCV_WND_SCALE;
+ NES_CM_DEFAULT_RCV_WND_SCALE;
ts = current_kernel_time();
cm_node->tcp_cntxt.loc_seq_num = htonl(ts.tv_nsec);
cm_node->tcp_cntxt.mss = nesvnic->max_frame_size - sizeof(struct iphdr) -
- sizeof(struct tcphdr) - ETH_HLEN - VLAN_HLEN;
+ sizeof(struct tcphdr) - ETH_HLEN - VLAN_HLEN;
cm_node->tcp_cntxt.rcv_nxt = 0;
/* get a unique session ID , add thread_id to an upcounter to handle race */
atomic_inc(&cm_core->node_cnt);
@@ -1222,12 +1454,11 @@
cm_node->loopbackpartner = NULL;
/* get the mac addr for the remote node */
- if (ipv4_is_loopback(htonl(cm_node->rem_addr)))
+ if (ipv4_is_loopback(htonl(cm_node->rem_addr))) {
arpindex = nes_arp_table(nesdev, ntohl(nesvnic->local_ipaddr), NULL, NES_ARP_RESOLVE);
- else {
+ } else {
oldarpindex = nes_arp_table(nesdev, cm_node->rem_addr, NULL, NES_ARP_RESOLVE);
arpindex = nes_addr_resolve_neigh(nesvnic, cm_info->rem_addr, oldarpindex);
-
}
if (arpindex < 0) {
kfree(cm_node);
@@ -1260,7 +1491,7 @@
* rem_ref_cm_node - destroy an instance of a cm node
*/
static int rem_ref_cm_node(struct nes_cm_core *cm_core,
- struct nes_cm_node *cm_node)
+ struct nes_cm_node *cm_node)
{
unsigned long flags;
struct nes_qp *nesqp;
@@ -1291,9 +1522,9 @@
} else {
if (cm_node->apbvt_set && cm_node->nesvnic) {
nes_manage_apbvt(cm_node->nesvnic, cm_node->loc_port,
- PCI_FUNC(
- cm_node->nesvnic->nesdev->pcidev->devfn),
- NES_MANAGE_APBVT_DEL);
+ PCI_FUNC(
+ cm_node->nesvnic->nesdev->pcidev->devfn),
+ NES_MANAGE_APBVT_DEL);
}
}
@@ -1314,7 +1545,7 @@
* process_options
*/
static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc,
- u32 optionsize, u32 syn_packet)
+ u32 optionsize, u32 syn_packet)
{
u32 tmp;
u32 offset = 0;
@@ -1332,15 +1563,15 @@
continue;
case OPTION_NUMBER_MSS:
nes_debug(NES_DBG_CM, "%s: MSS Length: %d Offset: %d "
- "Size: %d\n", __func__,
- all_options->as_mss.length, offset, optionsize);
+ "Size: %d\n", __func__,
+ all_options->as_mss.length, offset, optionsize);
got_mss_option = 1;
if (all_options->as_mss.length != 4) {
return 1;
} else {
tmp = ntohs(all_options->as_mss.mss);
if (tmp > 0 && tmp <
- cm_node->tcp_cntxt.mss)
+ cm_node->tcp_cntxt.mss)
cm_node->tcp_cntxt.mss = tmp;
}
break;
@@ -1348,12 +1579,9 @@
cm_node->tcp_cntxt.snd_wscale =
all_options->as_windowscale.shiftcount;
break;
- case OPTION_NUMBER_WRITE0:
- cm_node->send_write0 = 1;
- break;
default:
nes_debug(NES_DBG_CM, "TCP Option not understood: %x\n",
- all_options->as_base.optionnum);
+ all_options->as_base.optionnum);
break;
}
offset += all_options->as_base.length;
@@ -1372,8 +1600,8 @@
static void handle_fin_pkt(struct nes_cm_node *cm_node)
{
nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. "
- "refcnt=%d\n", cm_node, cm_node->state,
- atomic_read(&cm_node->ref_count));
+ "refcnt=%d\n", cm_node, cm_node->state,
+ atomic_read(&cm_node->ref_count));
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
case NES_CM_STATE_SYN_SENT:
@@ -1439,7 +1667,20 @@
nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
"listener=%p state=%d\n", __func__, __LINE__, cm_node,
cm_node->listener, cm_node->state);
- active_open_err(cm_node, skb, reset);
+ switch (cm_node->mpa_frame_rev) {
+ case IETF_MPA_V2:
+ cm_node->mpa_frame_rev = IETF_MPA_V1;
+ /* send a syn and goto syn sent state */
+ cm_node->state = NES_CM_STATE_SYN_SENT;
+ if (send_syn(cm_node, 0, NULL)) {
+ active_open_err(cm_node, skb, reset);
+ }
+ break;
+ case IETF_MPA_V1:
+ default:
+ active_open_err(cm_node, skb, reset);
+ break;
+ }
break;
case NES_CM_STATE_MPAREQ_RCVD:
atomic_inc(&cm_node->passive_state);
@@ -1475,21 +1716,21 @@
static void handle_rcv_mpa(struct nes_cm_node *cm_node, struct sk_buff *skb)
{
-
- int ret = 0;
+ int ret = 0;
int datasize = skb->len;
u8 *dataloc = skb->data;
enum nes_cm_event_type type = NES_CM_EVENT_UNKNOWN;
- u32 res_type;
+ u32 res_type;
+
ret = parse_mpa(cm_node, dataloc, &res_type, datasize);
if (ret) {
nes_debug(NES_DBG_CM, "didn't like MPA Request\n");
if (cm_node->state == NES_CM_STATE_MPAREQ_SENT) {
nes_debug(NES_DBG_CM, "%s[%u] create abort for "
- "cm_node=%p listener=%p state=%d\n", __func__,
- __LINE__, cm_node, cm_node->listener,
- cm_node->state);
+ "cm_node=%p listener=%p state=%d\n", __func__,
+ __LINE__, cm_node, cm_node->listener,
+ cm_node->state);
active_open_err(cm_node, skb, 1);
} else {
passive_open_err(cm_node, skb, 1);
@@ -1499,16 +1740,15 @@
switch (cm_node->state) {
case NES_CM_STATE_ESTABLISHED:
- if (res_type == NES_MPA_REQUEST_REJECT) {
+ if (res_type == NES_MPA_REQUEST_REJECT)
/*BIG problem as we are receiving the MPA.. So should
- * not be REJECT.. This is Passive Open.. We can
- * only receive it Reject for Active Open...*/
+ * not be REJECT.. This is Passive Open.. We can
+ * only receive it Reject for Active Open...*/
WARN_ON(1);
- }
cm_node->state = NES_CM_STATE_MPAREQ_RCVD;
type = NES_CM_EVENT_MPA_REQ;
atomic_set(&cm_node->passive_state,
- NES_PASSIVE_STATE_INDICATED);
+ NES_PASSIVE_STATE_INDICATED);
break;
case NES_CM_STATE_MPAREQ_SENT:
cleanup_retrans_entry(cm_node);
@@ -1535,8 +1775,8 @@
case NES_CM_STATE_SYN_SENT:
case NES_CM_STATE_MPAREQ_SENT:
nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
- "listener=%p state=%d\n", __func__, __LINE__, cm_node,
- cm_node->listener, cm_node->state);
+ "listener=%p state=%d\n", __func__, __LINE__, cm_node,
+ cm_node->listener, cm_node->state);
active_open_err(cm_node, skb, 1);
break;
case NES_CM_STATE_ESTABLISHED:
@@ -1550,11 +1790,11 @@
}
static int check_syn(struct nes_cm_node *cm_node, struct tcphdr *tcph,
- struct sk_buff *skb)
+ struct sk_buff *skb)
{
int err;
- err = ((ntohl(tcph->ack_seq) == cm_node->tcp_cntxt.loc_seq_num))? 0 : 1;
+ err = ((ntohl(tcph->ack_seq) == cm_node->tcp_cntxt.loc_seq_num)) ? 0 : 1;
if (err)
active_open_err(cm_node, skb, 1);
@@ -1562,7 +1802,7 @@
}
static int check_seq(struct nes_cm_node *cm_node, struct tcphdr *tcph,
- struct sk_buff *skb)
+ struct sk_buff *skb)
{
int err = 0;
u32 seq;
@@ -1570,21 +1810,22 @@
u32 loc_seq_num = cm_node->tcp_cntxt.loc_seq_num;
u32 rcv_nxt = cm_node->tcp_cntxt.rcv_nxt;
u32 rcv_wnd;
+
seq = ntohl(tcph->seq);
ack_seq = ntohl(tcph->ack_seq);
rcv_wnd = cm_node->tcp_cntxt.rcv_wnd;
if (ack_seq != loc_seq_num)
err = 1;
- else if (!between(seq, rcv_nxt, (rcv_nxt+rcv_wnd)))
+ else if (!between(seq, rcv_nxt, (rcv_nxt + rcv_wnd)))
err = 1;
if (err) {
nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
- "listener=%p state=%d\n", __func__, __LINE__, cm_node,
- cm_node->listener, cm_node->state);
+ "listener=%p state=%d\n", __func__, __LINE__, cm_node,
+ cm_node->listener, cm_node->state);
indicate_pkt_err(cm_node, skb);
nes_debug(NES_DBG_CM, "seq ERROR cm_node =%p seq=0x%08X "
- "rcv_nxt=0x%08X rcv_wnd=0x%x\n", cm_node, seq, rcv_nxt,
- rcv_wnd);
+ "rcv_nxt=0x%08X rcv_wnd=0x%x\n", cm_node, seq, rcv_nxt,
+ rcv_wnd);
}
return err;
}
@@ -1594,9 +1835,8 @@
* is created with a listener or it may comein as rexmitted packet which in
* that case will be just dropped.
*/
-
static void handle_syn_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
- struct tcphdr *tcph)
+ struct tcphdr *tcph)
{
int ret;
u32 inc_sequence;
@@ -1615,15 +1855,15 @@
case NES_CM_STATE_LISTENING:
/* Passive OPEN */
if (atomic_read(&cm_node->listener->pend_accepts_cnt) >
- cm_node->listener->backlog) {
+ cm_node->listener->backlog) {
nes_debug(NES_DBG_CM, "drop syn due to backlog "
- "pressure \n");
+ "pressure \n");
cm_backlog_drops++;
passive_open_err(cm_node, skb, 0);
break;
}
ret = handle_tcp_options(cm_node, tcph, skb, optionsize,
- 1);
+ 1);
if (ret) {
passive_open_err(cm_node, skb, 0);
/* drop pkt */
@@ -1657,9 +1897,8 @@
}
static void handle_synack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
- struct tcphdr *tcph)
+ struct tcphdr *tcph)
{
-
int ret;
u32 inc_sequence;
int optionsize;
@@ -1678,7 +1917,7 @@
ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 0);
if (ret) {
nes_debug(NES_DBG_CM, "cm_node=%p tcp_options failed\n",
- cm_node);
+ cm_node);
break;
}
cleanup_retrans_entry(cm_node);
@@ -1717,12 +1956,13 @@
}
static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
- struct tcphdr *tcph)
+ struct tcphdr *tcph)
{
int datasize = 0;
u32 inc_sequence;
int ret = 0;
int optionsize;
+
optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
if (check_seq(cm_node, tcph, skb))
@@ -1743,8 +1983,9 @@
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else /* rcvd ACK only */
+ } else { /* rcvd ACK only */
dev_kfree_skb_any(skb);
+ }
break;
case NES_CM_STATE_ESTABLISHED:
/* Passive OPEN */
@@ -1752,16 +1993,18 @@
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else
+ } else {
drop_packet(skb);
+ }
break;
case NES_CM_STATE_MPAREQ_SENT:
cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else /* Could be just an ack pkt.. */
+ } else { /* Could be just an ack pkt.. */
dev_kfree_skb_any(skb);
+ }
break;
case NES_CM_STATE_LISTENING:
cleanup_retrans_entry(cm_node);
@@ -1802,14 +2045,15 @@
static int handle_tcp_options(struct nes_cm_node *cm_node, struct tcphdr *tcph,
- struct sk_buff *skb, int optionsize, int passive)
+ struct sk_buff *skb, int optionsize, int passive)
{
u8 *optionsloc = (u8 *)&tcph[1];
+
if (optionsize) {
if (process_options(cm_node, optionsloc, optionsize,
- (u32)tcph->syn)) {
+ (u32)tcph->syn)) {
nes_debug(NES_DBG_CM, "%s: Node %p, Sending RESET\n",
- __func__, cm_node);
+ __func__, cm_node);
if (passive)
passive_open_err(cm_node, skb, 1);
else
@@ -1819,7 +2063,7 @@
}
cm_node->tcp_cntxt.snd_wnd = ntohs(tcph->window) <<
- cm_node->tcp_cntxt.snd_wscale;
+ cm_node->tcp_cntxt.snd_wscale;
if (cm_node->tcp_cntxt.snd_wnd > cm_node->tcp_cntxt.max_snd_wnd)
cm_node->tcp_cntxt.max_snd_wnd = cm_node->tcp_cntxt.snd_wnd;
@@ -1830,18 +2074,18 @@
* active_open_err() will send reset() if flag set..
* It will also send ABORT event.
*/
-
static void active_open_err(struct nes_cm_node *cm_node, struct sk_buff *skb,
- int reset)
+ int reset)
{
cleanup_retrans_entry(cm_node);
if (reset) {
nes_debug(NES_DBG_CM, "ERROR active err called for cm_node=%p, "
- "state=%d\n", cm_node, cm_node->state);
+ "state=%d\n", cm_node, cm_node->state);
add_ref_cm_node(cm_node);
send_reset(cm_node, skb);
- } else
+ } else {
dev_kfree_skb_any(skb);
+ }
cm_node->state = NES_CM_STATE_CLOSED;
create_event(cm_node, NES_CM_EVENT_ABORTED);
@@ -1851,15 +2095,14 @@
* passive_open_err() will either do a reset() or will free up the skb and
* remove the cm_node.
*/
-
static void passive_open_err(struct nes_cm_node *cm_node, struct sk_buff *skb,
- int reset)
+ int reset)
{
cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
if (reset) {
nes_debug(NES_DBG_CM, "passive_open_err sending RST for "
- "cm_node=%p state =%d\n", cm_node, cm_node->state);
+ "cm_node=%p state =%d\n", cm_node, cm_node->state);
send_reset(cm_node, skb);
} else {
dev_kfree_skb_any(skb);
@@ -1874,6 +2117,7 @@
static void free_retrans_entry(struct nes_cm_node *cm_node)
{
struct nes_timer_entry *send_entry;
+
send_entry = cm_node->send_entry;
if (send_entry) {
cm_node->send_entry = NULL;
@@ -1897,26 +2141,28 @@
* Returns skb if to be freed, else it will return NULL if already used..
*/
static void process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
- struct nes_cm_core *cm_core)
+ struct nes_cm_core *cm_core)
{
- enum nes_tcpip_pkt_type pkt_type = NES_PKT_TYPE_UNKNOWN;
+ enum nes_tcpip_pkt_type pkt_type = NES_PKT_TYPE_UNKNOWN;
struct tcphdr *tcph = tcp_hdr(skb);
- u32 fin_set = 0;
+ u32 fin_set = 0;
int ret = 0;
+
skb_pull(skb, ip_hdr(skb)->ihl << 2);
nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d "
- "ack=%d rst=%d fin=%d\n", cm_node, cm_node->state, tcph->syn,
- tcph->ack, tcph->rst, tcph->fin);
+ "ack=%d rst=%d fin=%d\n", cm_node, cm_node->state, tcph->syn,
+ tcph->ack, tcph->rst, tcph->fin);
- if (tcph->rst)
+ if (tcph->rst) {
pkt_type = NES_PKT_TYPE_RST;
- else if (tcph->syn) {
+ } else if (tcph->syn) {
pkt_type = NES_PKT_TYPE_SYN;
if (tcph->ack)
pkt_type = NES_PKT_TYPE_SYNACK;
- } else if (tcph->ack)
+ } else if (tcph->ack) {
pkt_type = NES_PKT_TYPE_ACK;
+ }
if (tcph->fin)
fin_set = 1;
@@ -1947,17 +2193,17 @@
* mini_cm_listen - create a listen node with params
*/
static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *cm_core,
- struct nes_vnic *nesvnic, struct nes_cm_info *cm_info)
+ struct nes_vnic *nesvnic, struct nes_cm_info *cm_info)
{
struct nes_cm_listener *listener;
unsigned long flags;
nes_debug(NES_DBG_CM, "Search for 0x%08x : 0x%04x\n",
- cm_info->loc_addr, cm_info->loc_port);
+ cm_info->loc_addr, cm_info->loc_port);
/* cannot have multiple matching listeners */
listener = find_listener(cm_core, htonl(cm_info->loc_addr),
- htons(cm_info->loc_port), NES_CM_LISTENER_EITHER_STATE);
+ htons(cm_info->loc_port), NES_CM_LISTENER_EITHER_STATE);
if (listener && listener->listener_state == NES_CM_LISTENER_ACTIVE_STATE) {
/* find automatically incs ref count ??? */
atomic_dec(&listener->ref_count);
@@ -2003,9 +2249,9 @@
}
nes_debug(NES_DBG_CM, "Api - listen(): addr=0x%08X, port=0x%04x,"
- " listener = %p, backlog = %d, cm_id = %p.\n",
- cm_info->loc_addr, cm_info->loc_port,
- listener, listener->backlog, listener->cm_id);
+ " listener = %p, backlog = %d, cm_id = %p.\n",
+ cm_info->loc_addr, cm_info->loc_port,
+ listener, listener->backlog, listener->cm_id);
return listener;
}
@@ -2015,26 +2261,20 @@
* mini_cm_connect - make a connection node with params
*/
static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
- struct nes_vnic *nesvnic, u16 private_data_len,
- void *private_data, struct nes_cm_info *cm_info)
+ struct nes_vnic *nesvnic, u16 private_data_len,
+ void *private_data, struct nes_cm_info *cm_info)
{
int ret = 0;
struct nes_cm_node *cm_node;
struct nes_cm_listener *loopbackremotelistener;
struct nes_cm_node *loopbackremotenode;
struct nes_cm_info loopback_cm_info;
- u16 mpa_frame_size = sizeof(struct ietf_mpa_frame) + private_data_len;
- struct ietf_mpa_frame *mpa_frame = NULL;
+ u8 *start_buff;
/* create a CM connection node */
cm_node = make_cm_node(cm_core, nesvnic, cm_info, NULL);
if (!cm_node)
return NULL;
- mpa_frame = &cm_node->mpa_frame;
- memcpy(mpa_frame->key, IEFT_MPA_KEY_REQ, IETF_MPA_KEY_SIZE);
- mpa_frame->flags = IETF_MPA_FLAGS_CRC;
- mpa_frame->rev = IETF_MPA_VERSION;
- mpa_frame->priv_data_len = htons(private_data_len);
/* set our node side to client (active) side */
cm_node->tcp_cntxt.client = 1;
@@ -2042,8 +2282,8 @@
if (cm_info->loc_addr == cm_info->rem_addr) {
loopbackremotelistener = find_listener(cm_core,
- ntohl(nesvnic->local_ipaddr), cm_node->rem_port,
- NES_CM_LISTENER_ACTIVE_STATE);
+ ntohl(nesvnic->local_ipaddr), cm_node->rem_port,
+ NES_CM_LISTENER_ACTIVE_STATE);
if (loopbackremotelistener == NULL) {
create_event(cm_node, NES_CM_EVENT_ABORTED);
} else {
@@ -2052,7 +2292,7 @@
loopback_cm_info.rem_port = cm_info->loc_port;
loopback_cm_info.cm_id = loopbackremotelistener->cm_id;
loopbackremotenode = make_cm_node(cm_core, nesvnic,
- &loopback_cm_info, loopbackremotelistener);
+ &loopback_cm_info, loopbackremotelistener);
if (!loopbackremotenode) {
rem_ref_cm_node(cm_node->cm_core, cm_node);
return NULL;
@@ -2063,7 +2303,7 @@
NES_CM_DEFAULT_RCV_WND_SCALE;
cm_node->loopbackpartner = loopbackremotenode;
memcpy(loopbackremotenode->mpa_frame_buf, private_data,
- private_data_len);
+ private_data_len);
loopbackremotenode->mpa_frame_size = private_data_len;
/* we are done handling this state. */
@@ -2091,12 +2331,10 @@
return cm_node;
}
- /* set our node side to client (active) side */
- cm_node->tcp_cntxt.client = 1;
- /* init our MPA frame ptr */
- memcpy(mpa_frame->priv_data, private_data, private_data_len);
+ start_buff = &cm_node->mpa_frame_buf[0] + sizeof(struct ietf_mpa_v2);
+ cm_node->mpa_frame_size = private_data_len;
- cm_node->mpa_frame_size = mpa_frame_size;
+ memcpy(start_buff, private_data, private_data_len);
/* send a syn and goto syn sent state */
cm_node->state = NES_CM_STATE_SYN_SENT;
@@ -2105,18 +2343,19 @@
if (ret) {
/* error in sending the syn free up the cm_node struct */
nes_debug(NES_DBG_CM, "Api - connect() FAILED: dest "
- "addr=0x%08X, port=0x%04x, cm_node=%p, cm_id = %p.\n",
- cm_node->rem_addr, cm_node->rem_port, cm_node,
- cm_node->cm_id);
+ "addr=0x%08X, port=0x%04x, cm_node=%p, cm_id = %p.\n",
+ cm_node->rem_addr, cm_node->rem_port, cm_node,
+ cm_node->cm_id);
rem_ref_cm_node(cm_node->cm_core, cm_node);
cm_node = NULL;
}
- if (cm_node)
+ if (cm_node) {
nes_debug(NES_DBG_CM, "Api - connect(): dest addr=0x%08X,"
- "port=0x%04x, cm_node=%p, cm_id = %p.\n",
- cm_node->rem_addr, cm_node->rem_port, cm_node,
- cm_node->cm_id);
+ "port=0x%04x, cm_node=%p, cm_id = %p.\n",
+ cm_node->rem_addr, cm_node->rem_port, cm_node,
+ cm_node->cm_id);
+ }
return cm_node;
}
@@ -2126,8 +2365,7 @@
* mini_cm_accept - accept a connection
* This function is never called
*/
-static int mini_cm_accept(struct nes_cm_core *cm_core,
- struct ietf_mpa_frame *mpa_frame, struct nes_cm_node *cm_node)
+static int mini_cm_accept(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node)
{
return 0;
}
@@ -2136,8 +2374,7 @@
/**
* mini_cm_reject - reject and teardown a connection
*/
-static int mini_cm_reject(struct nes_cm_core *cm_core,
- struct ietf_mpa_frame *mpa_frame, struct nes_cm_node *cm_node)
+static int mini_cm_reject(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node)
{
int ret = 0;
int err = 0;
@@ -2147,7 +2384,7 @@
struct nes_cm_node *loopback = cm_node->loopbackpartner;
nes_debug(NES_DBG_CM, "%s cm_node=%p type=%d state=%d\n",
- __func__, cm_node, cm_node->tcp_cntxt.client, cm_node->state);
+ __func__, cm_node, cm_node->tcp_cntxt.client, cm_node->state);
if (cm_node->tcp_cntxt.client)
return ret;
@@ -2168,8 +2405,9 @@
err = send_reset(cm_node, NULL);
if (err)
WARN_ON(1);
- } else
+ } else {
cm_id->add_ref(cm_id);
+ }
}
}
} else {
@@ -2244,7 +2482,7 @@
case NES_CM_STATE_TSA:
if (cm_node->send_entry)
printk(KERN_ERR "ERROR Close got called from STATE_TSA "
- "send_entry=%p\n", cm_node->send_entry);
+ "send_entry=%p\n", cm_node->send_entry);
ret = rem_ref_cm_node(cm_core, cm_node);
break;
}
@@ -2257,7 +2495,7 @@
* node state machine
*/
static int mini_cm_recv_pkt(struct nes_cm_core *cm_core,
- struct nes_vnic *nesvnic, struct sk_buff *skb)
+ struct nes_vnic *nesvnic, struct sk_buff *skb)
{
struct nes_cm_node *cm_node = NULL;
struct nes_cm_listener *listener = NULL;
@@ -2269,9 +2507,8 @@
if (!skb)
return 0;
- if (skb->len < sizeof(struct iphdr) + sizeof(struct tcphdr)) {
+ if (skb->len < sizeof(struct iphdr) + sizeof(struct tcphdr))
return 0;
- }
iph = (struct iphdr *)skb->data;
tcph = (struct tcphdr *)(skb->data + sizeof(struct iphdr));
@@ -2289,8 +2526,8 @@
do {
cm_node = find_node(cm_core,
- nfo.rem_port, nfo.rem_addr,
- nfo.loc_port, nfo.loc_addr);
+ nfo.rem_port, nfo.rem_addr,
+ nfo.loc_port, nfo.loc_addr);
if (!cm_node) {
/* Only type of packet accepted are for */
@@ -2300,8 +2537,8 @@
break;
}
listener = find_listener(cm_core, nfo.loc_addr,
- nfo.loc_port,
- NES_CM_LISTENER_ACTIVE_STATE);
+ nfo.loc_port,
+ NES_CM_LISTENER_ACTIVE_STATE);
if (!listener) {
nfo.cm_id = NULL;
nfo.conn_type = 0;
@@ -2312,10 +2549,10 @@
nfo.cm_id = listener->cm_id;
nfo.conn_type = listener->conn_type;
cm_node = make_cm_node(cm_core, nesvnic, &nfo,
- listener);
+ listener);
if (!cm_node) {
nes_debug(NES_DBG_CM, "Unable to allocate "
- "node\n");
+ "node\n");
cm_packets_dropped++;
atomic_dec(&listener->ref_count);
dev_kfree_skb_any(skb);
@@ -2331,9 +2568,13 @@
}
add_ref_cm_node(cm_node);
} else if (cm_node->state == NES_CM_STATE_TSA) {
- rem_ref_cm_node(cm_core, cm_node);
- atomic_inc(&cm_accel_dropped_pkts);
- dev_kfree_skb_any(skb);
+ if (cm_node->nesqp->pau_mode)
+ nes_queue_mgt_skbs(skb, nesvnic, cm_node->nesqp);
+ else {
+ rem_ref_cm_node(cm_core, cm_node);
+ atomic_inc(&cm_accel_dropped_pkts);
+ dev_kfree_skb_any(skb);
+ }
break;
}
skb_reset_network_header(skb);
@@ -2363,7 +2604,7 @@
init_timer(&cm_core->tcp_timer);
cm_core->tcp_timer.function = nes_cm_timer_tick;
- cm_core->mtu = NES_CM_DEFAULT_MTU;
+ cm_core->mtu = NES_CM_DEFAULT_MTU;
cm_core->state = NES_CM_STATE_INITED;
cm_core->free_tx_pkt_max = NES_CM_DEFAULT_FREE_PKTS;
@@ -2401,9 +2642,8 @@
barrier();
- if (timer_pending(&cm_core->tcp_timer)) {
+ if (timer_pending(&cm_core->tcp_timer))
del_timer(&cm_core->tcp_timer);
- }
destroy_workqueue(cm_core->event_wq);
destroy_workqueue(cm_core->disconn_wq);
@@ -2458,8 +2698,8 @@
return -EINVAL;
nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_IPV4 |
- NES_QPCONTEXT_MISC_NO_NAGLE | NES_QPCONTEXT_MISC_DO_NOT_FRAG |
- NES_QPCONTEXT_MISC_DROS);
+ NES_QPCONTEXT_MISC_NO_NAGLE | NES_QPCONTEXT_MISC_DO_NOT_FRAG |
+ NES_QPCONTEXT_MISC_DROS);
if (cm_node->tcp_cntxt.snd_wscale || cm_node->tcp_cntxt.rcv_wscale)
nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_WSCALE);
@@ -2469,15 +2709,15 @@
nesqp->nesqp_context->mss |= cpu_to_le32(((u32)cm_node->tcp_cntxt.mss) << 16);
nesqp->nesqp_context->tcp_state_flow_label |= cpu_to_le32(
- (u32)NES_QPCONTEXT_TCPSTATE_EST << NES_QPCONTEXT_TCPFLOW_TCP_STATE_SHIFT);
+ (u32)NES_QPCONTEXT_TCPSTATE_EST << NES_QPCONTEXT_TCPFLOW_TCP_STATE_SHIFT);
nesqp->nesqp_context->pd_index_wscale |= cpu_to_le32(
- (cm_node->tcp_cntxt.snd_wscale << NES_QPCONTEXT_PDWSCALE_SND_WSCALE_SHIFT) &
- NES_QPCONTEXT_PDWSCALE_SND_WSCALE_MASK);
+ (cm_node->tcp_cntxt.snd_wscale << NES_QPCONTEXT_PDWSCALE_SND_WSCALE_SHIFT) &
+ NES_QPCONTEXT_PDWSCALE_SND_WSCALE_MASK);
nesqp->nesqp_context->pd_index_wscale |= cpu_to_le32(
- (cm_node->tcp_cntxt.rcv_wscale << NES_QPCONTEXT_PDWSCALE_RCV_WSCALE_SHIFT) &
- NES_QPCONTEXT_PDWSCALE_RCV_WSCALE_MASK);
+ (cm_node->tcp_cntxt.rcv_wscale << NES_QPCONTEXT_PDWSCALE_RCV_WSCALE_SHIFT) &
+ NES_QPCONTEXT_PDWSCALE_RCV_WSCALE_MASK);
nesqp->nesqp_context->keepalive = cpu_to_le32(0x80);
nesqp->nesqp_context->ts_recent = 0;
@@ -2486,24 +2726,24 @@
nesqp->nesqp_context->snd_wnd = cpu_to_le32(cm_node->tcp_cntxt.snd_wnd);
nesqp->nesqp_context->rcv_nxt = cpu_to_le32(cm_node->tcp_cntxt.rcv_nxt);
nesqp->nesqp_context->rcv_wnd = cpu_to_le32(cm_node->tcp_cntxt.rcv_wnd <<
- cm_node->tcp_cntxt.rcv_wscale);
+ cm_node->tcp_cntxt.rcv_wscale);
nesqp->nesqp_context->snd_max = cpu_to_le32(cm_node->tcp_cntxt.loc_seq_num);
nesqp->nesqp_context->snd_una = cpu_to_le32(cm_node->tcp_cntxt.loc_seq_num);
nesqp->nesqp_context->srtt = 0;
nesqp->nesqp_context->rttvar = cpu_to_le32(0x6);
nesqp->nesqp_context->ssthresh = cpu_to_le32(0x3FFFC000);
- nesqp->nesqp_context->cwnd = cpu_to_le32(2*cm_node->tcp_cntxt.mss);
+ nesqp->nesqp_context->cwnd = cpu_to_le32(2 * cm_node->tcp_cntxt.mss);
nesqp->nesqp_context->snd_wl1 = cpu_to_le32(cm_node->tcp_cntxt.rcv_nxt);
nesqp->nesqp_context->snd_wl2 = cpu_to_le32(cm_node->tcp_cntxt.loc_seq_num);
nesqp->nesqp_context->max_snd_wnd = cpu_to_le32(cm_node->tcp_cntxt.max_snd_wnd);
nes_debug(NES_DBG_CM, "QP%u: rcv_nxt = 0x%08X, snd_nxt = 0x%08X,"
- " Setting MSS to %u, PDWscale = 0x%08X, rcv_wnd = %u, context misc = 0x%08X.\n",
- nesqp->hwqp.qp_id, le32_to_cpu(nesqp->nesqp_context->rcv_nxt),
- le32_to_cpu(nesqp->nesqp_context->snd_nxt),
- cm_node->tcp_cntxt.mss, le32_to_cpu(nesqp->nesqp_context->pd_index_wscale),
- le32_to_cpu(nesqp->nesqp_context->rcv_wnd),
- le32_to_cpu(nesqp->nesqp_context->misc));
+ " Setting MSS to %u, PDWscale = 0x%08X, rcv_wnd = %u, context misc = 0x%08X.\n",
+ nesqp->hwqp.qp_id, le32_to_cpu(nesqp->nesqp_context->rcv_nxt),
+ le32_to_cpu(nesqp->nesqp_context->snd_nxt),
+ cm_node->tcp_cntxt.mss, le32_to_cpu(nesqp->nesqp_context->pd_index_wscale),
+ le32_to_cpu(nesqp->nesqp_context->rcv_wnd),
+ le32_to_cpu(nesqp->nesqp_context->misc));
nes_debug(NES_DBG_CM, " snd_wnd = 0x%08X.\n", le32_to_cpu(nesqp->nesqp_context->snd_wnd));
nes_debug(NES_DBG_CM, " snd_cwnd = 0x%08X.\n", le32_to_cpu(nesqp->nesqp_context->cwnd));
nes_debug(NES_DBG_CM, " max_swnd = 0x%08X.\n", le32_to_cpu(nesqp->nesqp_context->max_snd_wnd));
@@ -2524,7 +2764,7 @@
work = kzalloc(sizeof *work, GFP_ATOMIC);
if (!work)
- return -ENOMEM; /* Timer will clean up */
+ return -ENOMEM; /* Timer will clean up */
nes_add_ref(&nesqp->ibqp);
work->nesqp = nesqp;
@@ -2544,7 +2784,7 @@
kfree(dwork);
nes_debug(NES_DBG_CM, "processing AEQE id 0x%04X for QP%u.\n",
- nesqp->last_aeq, nesqp->hwqp.qp_id);
+ nesqp->last_aeq, nesqp->hwqp.qp_id);
nes_cm_disconn_true(nesqp);
nes_rem_ref(&nesqp->ibqp);
}
@@ -2580,7 +2820,7 @@
/* make sure we havent already closed this connection */
if (!cm_id) {
nes_debug(NES_DBG_CM, "QP%u disconnect_worker cmid is NULL\n",
- nesqp->hwqp.qp_id);
+ nesqp->hwqp.qp_id);
spin_unlock_irqrestore(&nesqp->lock, flags);
return -1;
}
@@ -2589,7 +2829,7 @@
nes_debug(NES_DBG_CM, "Disconnecting QP%u\n", nesqp->hwqp.qp_id);
original_hw_tcp_state = nesqp->hw_tcp_state;
- original_ibqp_state = nesqp->ibqp_state;
+ original_ibqp_state = nesqp->ibqp_state;
last_ae = nesqp->last_aeq;
if (nesqp->term_flags) {
@@ -2647,16 +2887,16 @@
cm_event.private_data_len = 0;
nes_debug(NES_DBG_CM, "Generating a CM Disconnect Event"
- " for QP%u, SQ Head = %u, SQ Tail = %u. "
- "cm_id = %p, refcount = %u.\n",
- nesqp->hwqp.qp_id, nesqp->hwqp.sq_head,
- nesqp->hwqp.sq_tail, cm_id,
- atomic_read(&nesqp->refcount));
+ " for QP%u, SQ Head = %u, SQ Tail = %u. "
+ "cm_id = %p, refcount = %u.\n",
+ nesqp->hwqp.qp_id, nesqp->hwqp.sq_head,
+ nesqp->hwqp.sq_tail, cm_id,
+ atomic_read(&nesqp->refcount));
ret = cm_id->event_handler(cm_id, &cm_event);
if (ret)
nes_debug(NES_DBG_CM, "OFA CM event_handler "
- "returned, ret=%d\n", ret);
+ "returned, ret=%d\n", ret);
}
if (issue_close) {
@@ -2674,9 +2914,8 @@
cm_event.private_data_len = 0;
ret = cm_id->event_handler(cm_id, &cm_event);
- if (ret) {
+ if (ret)
nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
- }
cm_id->rem_ref(cm_id);
}
@@ -2716,8 +2955,8 @@
if (nesqp->lsmm_mr)
nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr);
pci_free_consistent(nesdev->pcidev,
- nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
- nesqp->ietf_frame, nesqp->ietf_frame_pbase);
+ nesqp->private_data_len + nesqp->ietf_frame_size,
+ nesqp->ietf_frame, nesqp->ietf_frame_pbase);
}
}
@@ -2756,6 +2995,12 @@
struct ib_phys_buf ibphysbuf;
struct nes_pd *nespd;
u64 tagged_offset;
+ u8 mpa_frame_offset = 0;
+ struct ietf_mpa_v2 *mpa_v2_frame;
+ u8 start_addr = 0;
+ u8 *start_ptr = &start_addr;
+ u8 **start_buff = &start_ptr;
+ u16 buff_len = 0;
ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
if (!ibqp)
@@ -2796,53 +3041,49 @@
nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
netdev_refcnt_read(nesvnic->netdev));
+ nesqp->ietf_frame_size = sizeof(struct ietf_mpa_v2);
/* allocate the ietf frame and space for private data */
nesqp->ietf_frame = pci_alloc_consistent(nesdev->pcidev,
- sizeof(struct ietf_mpa_frame) + conn_param->private_data_len,
- &nesqp->ietf_frame_pbase);
+ nesqp->ietf_frame_size + conn_param->private_data_len,
+ &nesqp->ietf_frame_pbase);
if (!nesqp->ietf_frame) {
- nes_debug(NES_DBG_CM, "Unable to allocate memory for private "
- "data\n");
+ nes_debug(NES_DBG_CM, "Unable to allocate memory for private data\n");
return -ENOMEM;
}
+ mpa_v2_frame = (struct ietf_mpa_v2 *)nesqp->ietf_frame;
+ if (cm_node->mpa_frame_rev == IETF_MPA_V1)
+ mpa_frame_offset = 4;
- /* setup the MPA frame */
+ memcpy(mpa_v2_frame->priv_data, conn_param->private_data,
+ conn_param->private_data_len);
+
+ cm_build_mpa_frame(cm_node, start_buff, &buff_len, nesqp->ietf_frame, MPA_KEY_REPLY);
nesqp->private_data_len = conn_param->private_data_len;
- memcpy(nesqp->ietf_frame->key, IEFT_MPA_KEY_REP, IETF_MPA_KEY_SIZE);
-
- memcpy(nesqp->ietf_frame->priv_data, conn_param->private_data,
- conn_param->private_data_len);
-
- nesqp->ietf_frame->priv_data_len =
- cpu_to_be16(conn_param->private_data_len);
- nesqp->ietf_frame->rev = mpa_version;
- nesqp->ietf_frame->flags = IETF_MPA_FLAGS_CRC;
/* setup our first outgoing iWarp send WQE (the IETF frame response) */
wqe = &nesqp->hwqp.sq_vbase[0];
if (cm_id->remote_addr.sin_addr.s_addr !=
- cm_id->local_addr.sin_addr.s_addr) {
+ cm_id->local_addr.sin_addr.s_addr) {
u64temp = (unsigned long)nesqp;
nesibdev = nesvnic->nesibdev;
nespd = nesqp->nespd;
- ibphysbuf.addr = nesqp->ietf_frame_pbase;
- ibphysbuf.size = conn_param->private_data_len +
- sizeof(struct ietf_mpa_frame);
- tagged_offset = (u64)(unsigned long)nesqp->ietf_frame;
+ ibphysbuf.addr = nesqp->ietf_frame_pbase + mpa_frame_offset;
+ ibphysbuf.size = buff_len;
+ tagged_offset = (u64)(unsigned long)*start_buff;
ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd,
- &ibphysbuf, 1,
- IB_ACCESS_LOCAL_WRITE,
- &tagged_offset);
+ &ibphysbuf, 1,
+ IB_ACCESS_LOCAL_WRITE,
+ &tagged_offset);
if (!ibmr) {
nes_debug(NES_DBG_CM, "Unable to register memory region"
- "for lSMM for cm_node = %p \n",
- cm_node);
+ "for lSMM for cm_node = %p \n",
+ cm_node);
pci_free_consistent(nesdev->pcidev,
- nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
- nesqp->ietf_frame, nesqp->ietf_frame_pbase);
+ nesqp->private_data_len + nesqp->ietf_frame_size,
+ nesqp->ietf_frame, nesqp->ietf_frame_pbase);
return -ENOMEM;
}
@@ -2850,22 +3091,20 @@
ibmr->device = nespd->ibpd.device;
nesqp->lsmm_mr = ibmr;
- u64temp |= NES_SW_CONTEXT_ALIGN>>1;
+ u64temp |= NES_SW_CONTEXT_ALIGN >> 1;
set_wqe_64bit_value(wqe->wqe_words,
- NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
- u64temp);
+ NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
+ u64temp);
wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
cpu_to_le32(NES_IWARP_SQ_WQE_STREAMING |
- NES_IWARP_SQ_WQE_WRPDU);
+ NES_IWARP_SQ_WQE_WRPDU);
wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
- cpu_to_le32(conn_param->private_data_len +
- sizeof(struct ietf_mpa_frame));
+ cpu_to_le32(buff_len);
set_wqe_64bit_value(wqe->wqe_words,
- NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
- (u64)(unsigned long)nesqp->ietf_frame);
+ NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
+ (u64)(unsigned long)(*start_buff));
wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
- cpu_to_le32(conn_param->private_data_len +
- sizeof(struct ietf_mpa_frame));
+ cpu_to_le32(buff_len);
wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey;
if (nesqp->sq_kmapped) {
nesqp->sq_kmapped = 0;
@@ -2874,7 +3113,7 @@
nesqp->nesqp_context->ird_ord_sizes |=
cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
- NES_QPCONTEXT_ORDIRD_WRPDU);
+ NES_QPCONTEXT_ORDIRD_WRPDU);
} else {
nesqp->nesqp_context->ird_ord_sizes |=
cpu_to_le32(NES_QPCONTEXT_ORDIRD_WRPDU);
@@ -2888,11 +3127,11 @@
/* nesqp->cm_node = (void *)cm_id->provider_data; */
cm_id->provider_data = nesqp;
- nesqp->active_conn = 0;
+ nesqp->active_conn = 0;
if (cm_node->state == NES_CM_STATE_TSA)
nes_debug(NES_DBG_CM, "Already state = TSA for cm_node=%p\n",
- cm_node);
+ cm_node);
nes_cm_init_tsa_conn(nesqp, cm_node);
@@ -2909,13 +3148,13 @@
cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
nesqp->nesqp_context->misc2 |= cpu_to_le32(
- (u32)PCI_FUNC(nesdev->pcidev->devfn) <<
- NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
+ (u32)PCI_FUNC(nesdev->pcidev->devfn) <<
+ NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
nesqp->nesqp_context->arp_index_vlan |=
cpu_to_le32(nes_arp_table(nesdev,
- le32_to_cpu(nesqp->nesqp_context->ip0), NULL,
- NES_ARP_RESOLVE) << 16);
+ le32_to_cpu(nesqp->nesqp_context->ip0), NULL,
+ NES_ARP_RESOLVE) << 16);
nesqp->nesqp_context->ts_val_delta = cpu_to_le32(
jiffies - nes_read_indexed(nesdev, NES_IDX_TCP_NOW));
@@ -2941,7 +3180,7 @@
crc_value = get_crc_value(&nes_quad);
nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n",
- nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
+ nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
nesqp->hte_index &= adapter->hte_index_mask;
nesqp->nesqp_context->hte_index = cpu_to_le32(nesqp->hte_index);
@@ -2949,17 +3188,15 @@
cm_node->cm_core->api->accelerated(cm_node->cm_core, cm_node);
nes_debug(NES_DBG_CM, "QP%u, Destination IP = 0x%08X:0x%04X, local = "
- "0x%08X:0x%04X, rcv_nxt=0x%08X, snd_nxt=0x%08X, mpa + "
- "private data length=%zu.\n", nesqp->hwqp.qp_id,
- ntohl(cm_id->remote_addr.sin_addr.s_addr),
- ntohs(cm_id->remote_addr.sin_port),
- ntohl(cm_id->local_addr.sin_addr.s_addr),
- ntohs(cm_id->local_addr.sin_port),
- le32_to_cpu(nesqp->nesqp_context->rcv_nxt),
- le32_to_cpu(nesqp->nesqp_context->snd_nxt),
- conn_param->private_data_len +
- sizeof(struct ietf_mpa_frame));
-
+ "0x%08X:0x%04X, rcv_nxt=0x%08X, snd_nxt=0x%08X, mpa + "
+ "private data length=%u.\n", nesqp->hwqp.qp_id,
+ ntohl(cm_id->remote_addr.sin_addr.s_addr),
+ ntohs(cm_id->remote_addr.sin_port),
+ ntohl(cm_id->local_addr.sin_addr.s_addr),
+ ntohs(cm_id->local_addr.sin_port),
+ le32_to_cpu(nesqp->nesqp_context->rcv_nxt),
+ le32_to_cpu(nesqp->nesqp_context->snd_nxt),
+ buff_len);
/* notify OF layer that accept event was successful */
cm_id->add_ref(cm_id);
@@ -2980,12 +3217,12 @@
nesqp->private_data_len;
/* copy entire MPA frame to our cm_node's frame */
memcpy(cm_node->loopbackpartner->mpa_frame_buf,
- nesqp->ietf_frame->priv_data, nesqp->private_data_len);
+ conn_param->private_data, conn_param->private_data_len);
create_event(cm_node->loopbackpartner, NES_CM_EVENT_CONNECTED);
}
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
- "ret=%d\n", __func__, __LINE__, ret);
+ "ret=%d\n", __func__, __LINE__, ret);
return 0;
}
@@ -2998,34 +3235,28 @@
{
struct nes_cm_node *cm_node;
struct nes_cm_node *loopback;
-
struct nes_cm_core *cm_core;
+ u8 *start_buff;
atomic_inc(&cm_rejects);
- cm_node = (struct nes_cm_node *) cm_id->provider_data;
+ cm_node = (struct nes_cm_node *)cm_id->provider_data;
loopback = cm_node->loopbackpartner;
cm_core = cm_node->cm_core;
cm_node->cm_id = cm_id;
- cm_node->mpa_frame_size = sizeof(struct ietf_mpa_frame) + pdata_len;
- if (cm_node->mpa_frame_size > MAX_CM_BUFFER)
+ if (pdata_len + sizeof(struct ietf_mpa_v2) > MAX_CM_BUFFER)
return -EINVAL;
- memcpy(&cm_node->mpa_frame.key[0], IEFT_MPA_KEY_REP, IETF_MPA_KEY_SIZE);
if (loopback) {
memcpy(&loopback->mpa_frame.priv_data, pdata, pdata_len);
loopback->mpa_frame.priv_data_len = pdata_len;
- loopback->mpa_frame_size = sizeof(struct ietf_mpa_frame) +
- pdata_len;
+ loopback->mpa_frame_size = pdata_len;
} else {
- memcpy(&cm_node->mpa_frame.priv_data, pdata, pdata_len);
- cm_node->mpa_frame.priv_data_len = cpu_to_be16(pdata_len);
+ start_buff = &cm_node->mpa_frame_buf[0] + sizeof(struct ietf_mpa_v2);
+ cm_node->mpa_frame_size = pdata_len;
+ memcpy(start_buff, pdata, pdata_len);
}
-
- cm_node->mpa_frame.rev = mpa_version;
- cm_node->mpa_frame.flags = IETF_MPA_FLAGS_CRC | IETF_MPA_FLAGS_REJECT;
-
- return cm_core->api->reject(cm_core, &cm_node->mpa_frame, cm_node);
+ return cm_core->api->reject(cm_core, cm_node);
}
@@ -3052,7 +3283,7 @@
nesvnic = to_nesvnic(nesqp->ibqp.device);
if (!nesvnic)
return -EINVAL;
- nesdev = nesvnic->nesdev;
+ nesdev = nesvnic->nesdev;
if (!nesdev)
return -EINVAL;
@@ -3060,12 +3291,12 @@
return -EINVAL;
nes_debug(NES_DBG_CM, "QP%u, current IP = 0x%08X, Destination IP = "
- "0x%08X:0x%04X, local = 0x%08X:0x%04X.\n", nesqp->hwqp.qp_id,
- ntohl(nesvnic->local_ipaddr),
- ntohl(cm_id->remote_addr.sin_addr.s_addr),
- ntohs(cm_id->remote_addr.sin_port),
- ntohl(cm_id->local_addr.sin_addr.s_addr),
- ntohs(cm_id->local_addr.sin_port));
+ "0x%08X:0x%04X, local = 0x%08X:0x%04X.\n", nesqp->hwqp.qp_id,
+ ntohl(nesvnic->local_ipaddr),
+ ntohl(cm_id->remote_addr.sin_addr.s_addr),
+ ntohs(cm_id->remote_addr.sin_port),
+ ntohl(cm_id->local_addr.sin_addr.s_addr),
+ ntohs(cm_id->local_addr.sin_port));
atomic_inc(&cm_connects);
nesqp->active_conn = 1;
@@ -3079,12 +3310,12 @@
nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32((u32)conn_param->ord);
nes_debug(NES_DBG_CM, "requested ord = 0x%08X.\n", (u32)conn_param->ord);
nes_debug(NES_DBG_CM, "mpa private data len =%u\n",
- conn_param->private_data_len);
+ conn_param->private_data_len);
if (cm_id->local_addr.sin_addr.s_addr !=
- cm_id->remote_addr.sin_addr.s_addr) {
+ cm_id->remote_addr.sin_addr.s_addr) {
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
- PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+ PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
apbvt_set = 1;
}
@@ -3100,13 +3331,13 @@
/* create a connect CM node connection */
cm_node = g_cm_core->api->connect(g_cm_core, nesvnic,
- conn_param->private_data_len, (void *)conn_param->private_data,
- &cm_info);
+ conn_param->private_data_len, (void *)conn_param->private_data,
+ &cm_info);
if (!cm_node) {
if (apbvt_set)
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
- PCI_FUNC(nesdev->pcidev->devfn),
- NES_MANAGE_APBVT_DEL);
+ PCI_FUNC(nesdev->pcidev->devfn),
+ NES_MANAGE_APBVT_DEL);
cm_id->rem_ref(cm_id);
return -ENOMEM;
@@ -3156,7 +3387,7 @@
cm_node = g_cm_core->api->listen(g_cm_core, nesvnic, &cm_info);
if (!cm_node) {
printk(KERN_ERR "%s[%u] Error returned from listen API call\n",
- __func__, __LINE__);
+ __func__, __LINE__);
return -ENOMEM;
}
@@ -3164,12 +3395,12 @@
if (!cm_node->reused_node) {
err = nes_manage_apbvt(nesvnic,
- ntohs(cm_id->local_addr.sin_port),
- PCI_FUNC(nesvnic->nesdev->pcidev->devfn),
- NES_MANAGE_APBVT_ADD);
+ ntohs(cm_id->local_addr.sin_port),
+ PCI_FUNC(nesvnic->nesdev->pcidev->devfn),
+ NES_MANAGE_APBVT_ADD);
if (err) {
printk(KERN_ERR "nes_manage_apbvt call returned %d.\n",
- err);
+ err);
g_cm_core->api->stop_listener(g_cm_core, (void *)cm_node);
return err;
}
@@ -3206,13 +3437,13 @@
int nes_cm_recv(struct sk_buff *skb, struct net_device *netdevice)
{
int rc = 0;
+
cm_packets_received++;
- if ((g_cm_core) && (g_cm_core->api)) {
+ if ((g_cm_core) && (g_cm_core->api))
rc = g_cm_core->api->recv_pkt(g_cm_core, netdev_priv(netdevice), skb);
- } else {
+ else
nes_debug(NES_DBG_CM, "Unable to process packet for CM,"
- " cm is not setup properly.\n");
- }
+ " cm is not setup properly.\n");
return rc;
}
@@ -3227,11 +3458,10 @@
nes_debug(NES_DBG_CM, "\n");
/* create the primary CM core, pass this handle to subsequent core inits */
g_cm_core = nes_cm_alloc_core();
- if (g_cm_core) {
+ if (g_cm_core)
return 0;
- } else {
+ else
return -ENOMEM;
- }
}
@@ -3252,7 +3482,6 @@
*/
static void cm_event_connected(struct nes_cm_event *event)
{
- u64 u64temp;
struct nes_qp *nesqp;
struct nes_vnic *nesvnic;
struct nes_device *nesdev;
@@ -3261,7 +3490,6 @@
struct ib_qp_attr attr;
struct iw_cm_id *cm_id;
struct iw_cm_event cm_event;
- struct nes_hw_qp_wqe *wqe;
struct nes_v4_quad nes_quad;
u32 crc_value;
int ret;
@@ -3275,17 +3503,16 @@
nesdev = nesvnic->nesdev;
nesadapter = nesdev->nesadapter;
- if (nesqp->destroyed) {
+ if (nesqp->destroyed)
return;
- }
atomic_inc(&cm_connecteds);
nes_debug(NES_DBG_CM, "QP%u attempting to connect to 0x%08X:0x%04X on"
- " local port 0x%04X. jiffies = %lu.\n",
- nesqp->hwqp.qp_id,
- ntohl(cm_id->remote_addr.sin_addr.s_addr),
- ntohs(cm_id->remote_addr.sin_port),
- ntohs(cm_id->local_addr.sin_port),
- jiffies);
+ " local port 0x%04X. jiffies = %lu.\n",
+ nesqp->hwqp.qp_id,
+ ntohl(cm_id->remote_addr.sin_addr.s_addr),
+ ntohs(cm_id->remote_addr.sin_port),
+ ntohs(cm_id->local_addr.sin_port),
+ jiffies);
nes_cm_init_tsa_conn(nesqp, cm_node);
@@ -3316,40 +3543,12 @@
NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT);
/* Adjust tail for not having a LSMM */
- nesqp->hwqp.sq_tail = 1;
+ /*nesqp->hwqp.sq_tail = 1;*/
-#if defined(NES_SEND_FIRST_WRITE)
- if (cm_node->send_write0) {
- nes_debug(NES_DBG_CM, "Sending first write.\n");
- wqe = &nesqp->hwqp.sq_vbase[0];
- u64temp = (unsigned long)nesqp;
- u64temp |= NES_SW_CONTEXT_ALIGN>>1;
- set_wqe_64bit_value(wqe->wqe_words,
- NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX, u64temp);
- wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
- cpu_to_le32(NES_IWARP_SQ_OP_RDMAW);
- wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = 0;
- wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = 0;
- wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = 0;
- wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = 0;
- wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+ build_rdma0_msg(cm_node, &nesqp);
- if (nesqp->sq_kmapped) {
- nesqp->sq_kmapped = 0;
- kunmap(nesqp->page);
- }
-
- /* use the reserved spot on the WQ for the extra first WQE */
- nesqp->nesqp_context->ird_ord_sizes &=
- cpu_to_le32(~(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
- NES_QPCONTEXT_ORDIRD_WRPDU |
- NES_QPCONTEXT_ORDIRD_ALSMM));
- nesqp->skip_lsmm = 1;
- nesqp->hwqp.sq_tail = 0;
- nes_write32(nesdev->regs + NES_WQE_ALLOC,
- (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
- }
-#endif
+ nes_write32(nesdev->regs + NES_WQE_ALLOC,
+ (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
memset(&nes_quad, 0, sizeof(nes_quad));
@@ -3366,13 +3565,13 @@
crc_value = get_crc_value(&nes_quad);
nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, After CRC = 0x%08X\n",
- nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask);
+ nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask);
nesqp->hte_index &= nesadapter->hte_index_mask;
nesqp->nesqp_context->hte_index = cpu_to_le32(nesqp->hte_index);
nesqp->ietf_frame = &cm_node->mpa_frame;
- nesqp->private_data_len = (u8) cm_node->mpa_frame_size;
+ nesqp->private_data_len = (u8)cm_node->mpa_frame_size;
cm_node->cm_core->api->accelerated(cm_node->cm_core, cm_node);
/* notify OF layer we successfully created the requested connection */
@@ -3384,7 +3583,9 @@
cm_event.remote_addr = cm_id->remote_addr;
cm_event.private_data = (void *)event->cm_node->mpa_frame_buf;
- cm_event.private_data_len = (u8) event->cm_node->mpa_frame_size;
+ cm_event.private_data_len = (u8)event->cm_node->mpa_frame_size;
+ cm_event.ird = cm_node->ird_size;
+ cm_event.ord = cm_node->ord_size;
cm_event.local_addr.sin_addr.s_addr = event->cm_info.rem_addr;
ret = cm_id->event_handler(cm_id, &cm_event);
@@ -3392,12 +3593,12 @@
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
- "ret=%d\n", __func__, __LINE__, ret);
+ "ret=%d\n", __func__, __LINE__, ret);
attr.qp_state = IB_QPS_RTS;
nes_modify_qp(&nesqp->ibqp, &attr, IB_QP_STATE, NULL);
nes_debug(NES_DBG_CM, "Exiting connect thread for QP%u. jiffies = "
- "%lu\n", nesqp->hwqp.qp_id, jiffies);
+ "%lu\n", nesqp->hwqp.qp_id, jiffies);
return;
}
@@ -3418,16 +3619,14 @@
return;
cm_id = event->cm_node->cm_id;
- if (!cm_id) {
+ if (!cm_id)
return;
- }
nes_debug(NES_DBG_CM, "cm_node=%p, cm_id=%p\n", event->cm_node, cm_id);
nesqp = cm_id->provider_data;
- if (!nesqp) {
+ if (!nesqp)
return;
- }
/* notify OF layer about this connection error event */
/* cm_id->rem_ref(cm_id); */
@@ -3442,14 +3641,14 @@
cm_event.private_data_len = 0;
nes_debug(NES_DBG_CM, "call CM_EVENT REJECTED, local_addr=%08x, "
- "remove_addr=%08x\n", cm_event.local_addr.sin_addr.s_addr,
- cm_event.remote_addr.sin_addr.s_addr);
+ "remove_addr=%08x\n", cm_event.local_addr.sin_addr.s_addr,
+ cm_event.remote_addr.sin_addr.s_addr);
ret = cm_id->event_handler(cm_id, &cm_event);
nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
- "ret=%d\n", __func__, __LINE__, ret);
+ "ret=%d\n", __func__, __LINE__, ret);
cm_id->rem_ref(cm_id);
rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
@@ -3519,7 +3718,7 @@
*/
static void cm_event_mpa_req(struct nes_cm_event *event)
{
- struct iw_cm_id *cm_id;
+ struct iw_cm_id *cm_id;
struct iw_cm_event cm_event;
int ret;
struct nes_cm_node *cm_node;
@@ -3531,7 +3730,7 @@
atomic_inc(&cm_connect_reqs);
nes_debug(NES_DBG_CM, "cm_node = %p - cm_id = %p, jiffies = %lu\n",
- cm_node, cm_id, jiffies);
+ cm_node, cm_id, jiffies);
cm_event.event = IW_CM_EVENT_CONNECT_REQUEST;
cm_event.status = 0;
@@ -3545,19 +3744,21 @@
cm_event.remote_addr.sin_port = htons(event->cm_info.rem_port);
cm_event.remote_addr.sin_addr.s_addr = htonl(event->cm_info.rem_addr);
cm_event.private_data = cm_node->mpa_frame_buf;
- cm_event.private_data_len = (u8) cm_node->mpa_frame_size;
+ cm_event.private_data_len = (u8)cm_node->mpa_frame_size;
+ cm_event.ird = cm_node->ird_size;
+ cm_event.ord = cm_node->ord_size;
ret = cm_id->event_handler(cm_id, &cm_event);
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, ret=%d\n",
- __func__, __LINE__, ret);
+ __func__, __LINE__, ret);
return;
}
static void cm_event_mpa_reject(struct nes_cm_event *event)
{
- struct iw_cm_id *cm_id;
+ struct iw_cm_id *cm_id;
struct iw_cm_event cm_event;
struct nes_cm_node *cm_node;
int ret;
@@ -3569,7 +3770,7 @@
atomic_inc(&cm_connect_reqs);
nes_debug(NES_DBG_CM, "cm_node = %p - cm_id = %p, jiffies = %lu\n",
- cm_node, cm_id, jiffies);
+ cm_node, cm_id, jiffies);
cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
cm_event.status = -ECONNREFUSED;
@@ -3584,17 +3785,17 @@
cm_event.remote_addr.sin_addr.s_addr = htonl(event->cm_info.rem_addr);
cm_event.private_data = cm_node->mpa_frame_buf;
- cm_event.private_data_len = (u8) cm_node->mpa_frame_size;
+ cm_event.private_data_len = (u8)cm_node->mpa_frame_size;
nes_debug(NES_DBG_CM, "call CM_EVENT_MPA_REJECTED, local_addr=%08x, "
- "remove_addr=%08x\n",
- cm_event.local_addr.sin_addr.s_addr,
- cm_event.remote_addr.sin_addr.s_addr);
+ "remove_addr=%08x\n",
+ cm_event.local_addr.sin_addr.s_addr,
+ cm_event.remote_addr.sin_addr.s_addr);
ret = cm_id->event_handler(cm_id, &cm_event);
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, ret=%d\n",
- __func__, __LINE__, ret);
+ __func__, __LINE__, ret);
return;
}
@@ -3613,7 +3814,7 @@
event->cm_info.cm_id->add_ref(event->cm_info.cm_id);
INIT_WORK(&event->event_work, nes_cm_event_handler);
nes_debug(NES_DBG_CM, "cm_node=%p queue_work, event=%p\n",
- event->cm_node, event);
+ event->cm_node, event);
queue_work(event->cm_node->cm_core->event_wq, &event->event_work);
@@ -3630,7 +3831,7 @@
static void nes_cm_event_handler(struct work_struct *work)
{
struct nes_cm_event *event = container_of(work, struct nes_cm_event,
- event_work);
+ event_work);
struct nes_cm_core *cm_core;
if ((!event) || (!event->cm_node) || (!event->cm_node->cm_core))
@@ -3638,29 +3839,29 @@
cm_core = event->cm_node->cm_core;
nes_debug(NES_DBG_CM, "event=%p, event->type=%u, events posted=%u\n",
- event, event->type, atomic_read(&cm_core->events_posted));
+ event, event->type, atomic_read(&cm_core->events_posted));
switch (event->type) {
case NES_CM_EVENT_MPA_REQ:
cm_event_mpa_req(event);
nes_debug(NES_DBG_CM, "cm_node=%p CM Event: MPA REQUEST\n",
- event->cm_node);
+ event->cm_node);
break;
case NES_CM_EVENT_RESET:
nes_debug(NES_DBG_CM, "cm_node = %p CM Event: RESET\n",
- event->cm_node);
+ event->cm_node);
cm_event_reset(event);
break;
case NES_CM_EVENT_CONNECTED:
if ((!event->cm_node->cm_id) ||
- (event->cm_node->state != NES_CM_STATE_TSA))
+ (event->cm_node->state != NES_CM_STATE_TSA))
break;
cm_event_connected(event);
nes_debug(NES_DBG_CM, "CM Event: CONNECTED\n");
break;
case NES_CM_EVENT_MPA_REJECT:
if ((!event->cm_node->cm_id) ||
- (event->cm_node->state == NES_CM_STATE_TSA))
+ (event->cm_node->state == NES_CM_STATE_TSA))
break;
cm_event_mpa_reject(event);
nes_debug(NES_DBG_CM, "CM Event: REJECT\n");
@@ -3668,7 +3869,7 @@
case NES_CM_EVENT_ABORTED:
if ((!event->cm_node->cm_id) ||
- (event->cm_node->state == NES_CM_STATE_TSA))
+ (event->cm_node->state == NES_CM_STATE_TSA))
break;
cm_event_connect_error(event);
nes_debug(NES_DBG_CM, "CM Event: ABORTED\n");
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index d9825fd..bdfa1fb 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -48,7 +48,16 @@
#define IETF_MPA_KEY_SIZE 16
#define IETF_MPA_VERSION 1
#define IETF_MAX_PRIV_DATA_LEN 512
-#define IETF_MPA_FRAME_SIZE 20
+#define IETF_MPA_FRAME_SIZE 20
+#define IETF_RTR_MSG_SIZE 4
+#define IETF_MPA_V2_FLAG 0x10
+
+/* IETF RTR MSG Fields */
+#define IETF_PEER_TO_PEER 0x8000
+#define IETF_FLPDU_ZERO_LEN 0x4000
+#define IETF_RDMA0_WRITE 0x8000
+#define IETF_RDMA0_READ 0x4000
+#define IETF_NO_IRD_ORD 0x3FFF
enum ietf_mpa_flags {
IETF_MPA_FLAGS_MARKERS = 0x80, /* receive Markers */
@@ -56,7 +65,7 @@
IETF_MPA_FLAGS_REJECT = 0x20, /* Reject */
};
-struct ietf_mpa_frame {
+struct ietf_mpa_v1 {
u8 key[IETF_MPA_KEY_SIZE];
u8 flags;
u8 rev;
@@ -66,6 +75,20 @@
#define ietf_mpa_req_resp_frame ietf_mpa_frame
+struct ietf_rtr_msg {
+ __be16 ctrl_ird;
+ __be16 ctrl_ord;
+};
+
+struct ietf_mpa_v2 {
+ u8 key[IETF_MPA_KEY_SIZE];
+ u8 flags;
+ u8 rev;
+ __be16 priv_data_len;
+ struct ietf_rtr_msg rtr_msg;
+ u8 priv_data[0];
+};
+
struct nes_v4_quad {
u32 rsvd0;
__le32 DstIpAdrIndex; /* Only most significant 5 bits are valid */
@@ -171,8 +194,7 @@
#define NES_CM_DEF_SEQ2 0x18ed5740
#define NES_CM_DEF_LOCAL_ID2 0xb807
-#define MAX_CM_BUFFER (IETF_MPA_FRAME_SIZE + IETF_MAX_PRIV_DATA_LEN)
-
+#define MAX_CM_BUFFER (IETF_MPA_FRAME_SIZE + IETF_RTR_MSG_SIZE + IETF_MAX_PRIV_DATA_LEN)
typedef u32 nes_addr_t;
@@ -204,6 +226,21 @@
NES_CM_STATE_CLOSED
};
+enum mpa_frame_version {
+ IETF_MPA_V1 = 1,
+ IETF_MPA_V2 = 2
+};
+
+enum mpa_frame_key {
+ MPA_KEY_REQUEST,
+ MPA_KEY_REPLY
+};
+
+enum send_rdma0 {
+ SEND_RDMA_READ_ZERO = 1,
+ SEND_RDMA_WRITE_ZERO = 2
+};
+
enum nes_tcpip_pkt_type {
NES_PKT_TYPE_UNKNOWN,
NES_PKT_TYPE_SYN,
@@ -245,9 +282,9 @@
enum nes_cm_listener_state {
- NES_CM_LISTENER_PASSIVE_STATE=1,
- NES_CM_LISTENER_ACTIVE_STATE=2,
- NES_CM_LISTENER_EITHER_STATE=3
+ NES_CM_LISTENER_PASSIVE_STATE = 1,
+ NES_CM_LISTENER_ACTIVE_STATE = 2,
+ NES_CM_LISTENER_EITHER_STATE = 3
};
struct nes_cm_listener {
@@ -283,16 +320,20 @@
struct nes_cm_node *loopbackpartner;
- struct nes_timer_entry *send_entry;
-
+ struct nes_timer_entry *send_entry;
+ struct nes_timer_entry *recv_entry;
spinlock_t retrans_list_lock;
- struct nes_timer_entry *recv_entry;
+ enum send_rdma0 send_rdma0_op;
- int send_write0;
union {
- struct ietf_mpa_frame mpa_frame;
- u8 mpa_frame_buf[MAX_CM_BUFFER];
+ struct ietf_mpa_v1 mpa_frame;
+ struct ietf_mpa_v2 mpa_v2_frame;
+ u8 mpa_frame_buf[MAX_CM_BUFFER];
};
+ enum mpa_frame_version mpa_frame_rev;
+ u16 ird_size;
+ u16 ord_size;
+
u16 mpa_frame_size;
struct iw_cm_id *cm_id;
struct list_head list;
@@ -399,10 +440,8 @@
struct nes_vnic *, u16, void *,
struct nes_cm_info *);
int (*close)(struct nes_cm_core *, struct nes_cm_node *);
- int (*accept)(struct nes_cm_core *, struct ietf_mpa_frame *,
- struct nes_cm_node *);
- int (*reject)(struct nes_cm_core *, struct ietf_mpa_frame *,
- struct nes_cm_node *);
+ int (*accept)(struct nes_cm_core *, struct nes_cm_node *);
+ int (*reject)(struct nes_cm_core *, struct nes_cm_node *);
int (*recv_pkt)(struct nes_cm_core *, struct nes_vnic *,
struct sk_buff *);
int (*destroy_cm_core)(struct nes_cm_core *);
@@ -422,5 +461,7 @@
int nes_cm_recv(struct sk_buff *, struct net_device *);
int nes_cm_start(void);
int nes_cm_stop(void);
+int nes_add_ref_cm_node(struct nes_cm_node *cm_node);
+int nes_rem_ref_cm_node(struct nes_cm_node *cm_node);
#endif /* NES_CM_H */
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index be36cbe..7c0ff19 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -110,6 +110,14 @@
};
#endif
+static inline void print_ip(struct nes_cm_node *cm_node)
+{
+ unsigned char *rem_addr;
+ if (cm_node) {
+ rem_addr = (unsigned char *)&cm_node->rem_addr;
+ printk(KERN_ERR PFX "Remote IP addr: %pI4\n", rem_addr);
+ }
+}
/**
* nes_nic_init_timer_defaults
@@ -1555,6 +1563,7 @@
struct nes_hw_nic_rq_wqe *nic_rqe;
struct nes_hw_nic *nesnic;
struct nes_device *nesdev;
+ struct nes_rskb_cb *cb;
u32 rx_wqes_posted = 0;
nesnic = &nesvnic->nic;
@@ -1580,6 +1589,9 @@
bus_address = pci_map_single(nesdev->pcidev,
skb->data, nesvnic->max_frame_size, PCI_DMA_FROMDEVICE);
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ cb->busaddr = bus_address;
+ cb->maplen = nesvnic->max_frame_size;
nic_rqe = &nesnic->rq_vbase[nesvnic->nic.rq_head];
nic_rqe->wqe_words[NES_NIC_RQ_WQE_LENGTH_1_0_IDX] =
@@ -1669,6 +1681,7 @@
u32 cqp_head;
u32 counter;
u32 wqe_count;
+ struct nes_rskb_cb *cb;
u8 jumbomode=0;
/* Allocate fragment, SQ, RQ, and CQ; Reuse CEQ based on the PCI function */
@@ -1845,6 +1858,9 @@
pmem = pci_map_single(nesdev->pcidev, skb->data,
nesvnic->max_frame_size, PCI_DMA_FROMDEVICE);
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ cb->busaddr = pmem;
+ cb->maplen = nesvnic->max_frame_size;
nic_rqe = &nesvnic->nic.rq_vbase[counter];
nic_rqe->wqe_words[NES_NIC_RQ_WQE_LENGTH_1_0_IDX] = cpu_to_le32(nesvnic->max_frame_size);
@@ -1873,6 +1889,13 @@
jumbomode = 1;
nes_nic_init_timer_defaults(nesdev, jumbomode);
}
+ if ((nesdev->nesadapter->allow_unaligned_fpdus) &&
+ (nes_init_mgt_qp(nesdev, netdev, nesvnic))) {
+ nes_debug(NES_DBG_INIT, "%s: Out of memory for pau nic\n", netdev->name);
+ nes_destroy_nic_qp(nesvnic);
+ return -ENOMEM;
+ }
+
nesvnic->lro_mgr.max_aggr = nes_lro_max_aggr;
nesvnic->lro_mgr.max_desc = NES_MAX_LRO_DESCRIPTORS;
nesvnic->lro_mgr.lro_arr = nesvnic->lro_desc;
@@ -1895,28 +1918,29 @@
struct nes_device *nesdev = nesvnic->nesdev;
struct nes_hw_cqp_wqe *cqp_wqe;
struct nes_hw_nic_sq_wqe *nic_sqe;
- struct nes_hw_nic_rq_wqe *nic_rqe;
__le16 *wqe_fragment_length;
u16 wqe_fragment_index;
- u64 wqe_frag;
u32 cqp_head;
u32 wqm_cfg0;
unsigned long flags;
+ struct sk_buff *rx_skb;
+ struct nes_rskb_cb *cb;
int ret;
+ if (nesdev->nesadapter->allow_unaligned_fpdus)
+ nes_destroy_mgt(nesvnic);
+
/* clear wqe stall before destroying NIC QP */
wqm_cfg0 = nes_read_indexed(nesdev, NES_IDX_WQM_CONFIG0);
nes_write_indexed(nesdev, NES_IDX_WQM_CONFIG0, wqm_cfg0 & 0xFFFF7FFF);
/* Free remaining NIC receive buffers */
while (nesvnic->nic.rq_head != nesvnic->nic.rq_tail) {
- nic_rqe = &nesvnic->nic.rq_vbase[nesvnic->nic.rq_tail];
- wqe_frag = (u64)le32_to_cpu(
- nic_rqe->wqe_words[NES_NIC_RQ_WQE_FRAG0_LOW_IDX]);
- wqe_frag |= ((u64)le32_to_cpu(
- nic_rqe->wqe_words[NES_NIC_RQ_WQE_FRAG0_HIGH_IDX]))<<32;
- pci_unmap_single(nesdev->pcidev, (dma_addr_t)wqe_frag,
- nesvnic->max_frame_size, PCI_DMA_FROMDEVICE);
+ rx_skb = nesvnic->nic.rx_skb[nesvnic->nic.rq_tail];
+ cb = (struct nes_rskb_cb *)&rx_skb->cb[0];
+ pci_unmap_single(nesdev->pcidev, cb->busaddr, cb->maplen,
+ PCI_DMA_FROMDEVICE);
+
dev_kfree_skb(nesvnic->nic.rx_skb[nesvnic->nic.rq_tail++]);
nesvnic->nic.rq_tail &= (nesvnic->nic.rq_size - 1);
}
@@ -2775,6 +2799,7 @@
struct nes_hw_nic_sq_wqe *nic_sqe;
struct sk_buff *skb;
struct sk_buff *rx_skb;
+ struct nes_rskb_cb *cb;
__le16 *wqe_fragment_length;
u32 head;
u32 cq_size;
@@ -2859,6 +2884,8 @@
bus_address += ((u64)le32_to_cpu(nic_rqe->wqe_words[NES_NIC_RQ_WQE_FRAG0_HIGH_IDX])) << 32;
pci_unmap_single(nesdev->pcidev, bus_address,
nesvnic->max_frame_size, PCI_DMA_FROMDEVICE);
+ cb = (struct nes_rskb_cb *)&rx_skb->cb[0];
+ cb->busaddr = 0;
/* rx_skb->tail = rx_skb->data + rx_pkt_size; */
/* rx_skb->len = rx_pkt_size; */
rx_skb->len = 0; /* TODO: see if this is necessary */
@@ -2983,6 +3010,7 @@
}
+
/**
* nes_cqp_ce_handler
*/
@@ -2997,6 +3025,8 @@
u32 cq_size;
u32 cqe_count=0;
u32 error_code;
+ u32 opcode;
+ u32 ctx_index;
/* u32 counter; */
head = cq->cq_head;
@@ -3007,12 +3037,9 @@
/* nes_debug(NES_DBG_CQP, "head=%u cqe_words=%08X\n", head,
le32_to_cpu(cq->cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX])); */
- if (le32_to_cpu(cq->cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX]) & NES_CQE_VALID) {
- u64temp = (((u64)(le32_to_cpu(cq->cq_vbase[head].
- cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX]))) << 32) |
- ((u64)(le32_to_cpu(cq->cq_vbase[head].
- cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX])));
- cqp = *((struct nes_hw_cqp **)&u64temp);
+ opcode = le32_to_cpu(cq->cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX]);
+ if (opcode & NES_CQE_VALID) {
+ cqp = &nesdev->cqp;
error_code = le32_to_cpu(cq->cq_vbase[head].cqe_words[NES_CQE_ERROR_CODE_IDX]);
if (error_code) {
@@ -3021,15 +3048,14 @@
le32_to_cpu(cq->cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX])&0x3f,
(u16)(error_code >> 16),
(u16)error_code);
- nes_debug(NES_DBG_CQP, "cqp: qp_id=%u, sq_head=%u, sq_tail=%u\n",
- cqp->qp_id, cqp->sq_head, cqp->sq_tail);
}
- u64temp = (((u64)(le32_to_cpu(nesdev->cqp.sq_vbase[cqp->sq_tail].
- wqe_words[NES_CQP_WQE_COMP_SCRATCH_HIGH_IDX]))) << 32) |
- ((u64)(le32_to_cpu(nesdev->cqp.sq_vbase[cqp->sq_tail].
- wqe_words[NES_CQP_WQE_COMP_SCRATCH_LOW_IDX])));
- cqp_request = *((struct nes_cqp_request **)&u64temp);
+ u64temp = (((u64)(le32_to_cpu(cq->cq_vbase[head].
+ cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX]))) << 32) |
+ ((u64)(le32_to_cpu(cq->cq_vbase[head].
+ cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX])));
+
+ cqp_request = (struct nes_cqp_request *)(unsigned long)u64temp;
if (cqp_request) {
if (cqp_request->waiting) {
/* nes_debug(NES_DBG_CQP, "%s: Waking up requestor\n"); */
@@ -3075,9 +3101,15 @@
cqp_wqe = &nesdev->cqp.sq_vbase[head];
memcpy(cqp_wqe, &cqp_request->cqp_wqe, sizeof(*cqp_wqe));
barrier();
- cqp_wqe->wqe_words[NES_CQP_WQE_COMP_SCRATCH_LOW_IDX] =
+
+ opcode = cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX];
+ if ((opcode & NES_CQP_OPCODE_MASK) == NES_CQP_DOWNLOAD_SEGMENT)
+ ctx_index = NES_CQP_WQE_DL_COMP_CTX_LOW_IDX;
+ else
+ ctx_index = NES_CQP_WQE_COMP_CTX_LOW_IDX;
+ cqp_wqe->wqe_words[ctx_index] =
cpu_to_le32((u32)((unsigned long)cqp_request));
- cqp_wqe->wqe_words[NES_CQP_WQE_COMP_SCRATCH_HIGH_IDX] =
+ cqp_wqe->wqe_words[ctx_index + 1] =
cpu_to_le32((u32)(upper_32_bits((unsigned long)cqp_request)));
nes_debug(NES_DBG_CQP, "CQP request %p (opcode 0x%02X) put on CQPs SQ wqe%u.\n",
cqp_request, le32_to_cpu(cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX])&0x3f, head);
@@ -3093,7 +3125,6 @@
nes_read32(nesdev->regs+NES_CQE_ALLOC);
}
-
static u8 *locate_mpa(u8 *pkt, u32 aeq_info)
{
if (aeq_info & NES_AEQE_Q2_DATA_ETHERNET) {
@@ -3553,9 +3584,9 @@
aeqe_cq_id = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]);
if (aeq_info & NES_AEQE_QP) {
- if ((!nes_is_resource_allocated(nesadapter, nesadapter->allocated_qps,
- aeqe_cq_id)) ||
- (atomic_read(&nesqp->close_timer_started)))
+ if (!nes_is_resource_allocated(nesadapter,
+ nesadapter->allocated_qps,
+ aeqe_cq_id))
return;
}
@@ -3566,8 +3597,7 @@
if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
if ((tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) &&
- (nesqp->ibqp_state == IB_QPS_RTS) &&
- ((nesadapter->eeprom_version >> 16) != NES_A0)) {
+ (nesqp->ibqp_state == IB_QPS_RTS)) {
spin_lock_irqsave(&nesqp->lock, flags);
nesqp->hw_iwarp_state = iwarp_state;
nesqp->hw_tcp_state = tcp_state;
@@ -3594,9 +3624,10 @@
return;
}
spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_CLOSING;
+ nesqp->hw_iwarp_state = iwarp_state;
+ nesqp->hw_tcp_state = tcp_state;
+ nesqp->last_aeq = async_event_id;
spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_hw_modify_qp(nesdev, nesqp, NES_CQP_QP_IWARP_STATE_CLOSING, 0, 0);
nes_cm_disconn(nesqp);
break;
@@ -3694,7 +3725,9 @@
case NES_AEQE_AEID_ROE_INVALID_RDMA_WRITE_OR_READ_RESP:
printk(KERN_ERR PFX "QP[%u] async_event_id=0x%04X IB_EVENT_QP_FATAL\n",
nesqp->hwqp.qp_id, async_event_id);
- nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
+ print_ip(nesqp->cm_node);
+ if (!atomic_read(&nesqp->close_timer_started))
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
break;
case NES_AEQE_AEID_CQ_OPERATION_ERROR:
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index c324147..0b590e1 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -47,6 +47,11 @@
#define NES_MULTICAST_PF_MAX 8
#define NES_A0 3
+#define NES_ENABLE_PAU 0x07000001
+#define NES_DISABLE_PAU 0x07000000
+#define NES_PAU_COUNTER 10
+#define NES_CQP_OPCODE_MASK 0x3f
+
enum pci_regs {
NES_INT_STAT = 0x0000,
NES_INT_MASK = 0x0004,
@@ -73,8 +78,10 @@
NES_IDX_QP_CONTROL = 0x0040,
NES_IDX_FLM_CONTROL = 0x0080,
NES_IDX_INT_CPU_STATUS = 0x00a0,
+ NES_IDX_GPR_TRIGGER = 0x00bc,
NES_IDX_GPIO_CONTROL = 0x00f0,
NES_IDX_GPIO_DATA = 0x00f4,
+ NES_IDX_GPR2 = 0x010c,
NES_IDX_TCP_CONFIG0 = 0x01e4,
NES_IDX_TCP_TIMER_CONFIG = 0x01ec,
NES_IDX_TCP_NOW = 0x01f0,
@@ -202,6 +209,7 @@
NES_CQP_REGISTER_SHARED_STAG = 0x0c,
NES_CQP_DEALLOCATE_STAG = 0x0d,
NES_CQP_MANAGE_ARP_CACHE = 0x0f,
+ NES_CQP_DOWNLOAD_SEGMENT = 0x10,
NES_CQP_SUSPEND_QPS = 0x11,
NES_CQP_UPLOAD_CONTEXT = 0x13,
NES_CQP_CREATE_CEQ = 0x16,
@@ -210,7 +218,8 @@
NES_CQP_DESTROY_AEQ = 0x1b,
NES_CQP_LMI_ACCESS = 0x20,
NES_CQP_FLUSH_WQES = 0x22,
- NES_CQP_MANAGE_APBVT = 0x23
+ NES_CQP_MANAGE_APBVT = 0x23,
+ NES_CQP_MANAGE_QUAD_HASH = 0x25
};
enum nes_cqp_wqe_word_idx {
@@ -222,6 +231,14 @@
NES_CQP_WQE_COMP_SCRATCH_HIGH_IDX = 5,
};
+enum nes_cqp_wqe_word_download_idx { /* format differs from other cqp ops */
+ NES_CQP_WQE_DL_OPCODE_IDX = 0,
+ NES_CQP_WQE_DL_COMP_CTX_LOW_IDX = 1,
+ NES_CQP_WQE_DL_COMP_CTX_HIGH_IDX = 2,
+ NES_CQP_WQE_DL_LENGTH_0_TOTAL_IDX = 3
+ /* For index values 4-15 use NES_NIC_SQ_WQE_ values */
+};
+
enum nes_cqp_cq_wqeword_idx {
NES_CQP_CQ_WQE_PBL_LOW_IDX = 6,
NES_CQP_CQ_WQE_PBL_HIGH_IDX = 7,
@@ -242,6 +259,7 @@
NES_CQP_STAG_WQE_PBL_LEN_IDX = 14
};
+#define NES_CQP_OP_LOGICAL_PORT_SHIFT 26
#define NES_CQP_OP_IWARP_STATE_SHIFT 28
#define NES_CQP_OP_TERMLEN_SHIFT 28
@@ -599,6 +617,7 @@
enum nes_nic_cqe_word_idx {
NES_NIC_CQE_ACCQP_ID_IDX = 0,
+ NES_NIC_CQE_HASH_RCVNXT = 1,
NES_NIC_CQE_TAG_PKT_TYPE_IDX = 2,
NES_NIC_CQE_MISC_IDX = 3,
};
@@ -1005,6 +1024,11 @@
#define NES_NIC_CQ_DOWNWARD_TREND 16
#define NES_PFT_SIZE 48
+#define NES_MGT_WQ_COUNT 32
+#define NES_MGT_CTX_SIZE ((NES_NIC_CTX_RQ_SIZE_32) | (NES_NIC_CTX_SQ_SIZE_32))
+#define NES_MGT_QP_OFFSET 36
+#define NES_MGT_QP_COUNT 4
+
struct nes_hw_tune_timer {
/* u16 cq_count; */
u16 threshold_low;
@@ -1118,6 +1142,7 @@
u32 et_rate_sample_interval;
u32 timer_int_limit;
u32 wqm_quanta;
+ u8 allow_unaligned_fpdus;
/* Adapter base MAC address */
u32 mac_addr_low;
@@ -1251,6 +1276,14 @@
enum ib_event_type delayed_event;
enum ib_event_type last_dispatched_event;
spinlock_t port_ibevent_lock;
+ u32 mgt_mem_size;
+ void *mgt_vbase;
+ dma_addr_t mgt_pbase;
+ struct nes_vnic_mgt *mgtvnic[NES_MGT_QP_COUNT];
+ struct task_struct *mgt_thread;
+ wait_queue_head_t mgt_wait_queue;
+ struct sk_buff_head mgt_skb_list;
+
};
struct nes_ib_device {
diff --git a/drivers/infiniband/hw/nes/nes_mgt.c b/drivers/infiniband/hw/nes/nes_mgt.c
new file mode 100644
index 0000000..b3b2a24
--- /dev/null
+++ b/drivers/infiniband/hw/nes/nes_mgt.c
@@ -0,0 +1,1162 @@
+/*
+ * Copyright (c) 2006 - 2009 Intel-NE, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/kthread.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <net/tcp.h>
+#include "nes.h"
+#include "nes_mgt.h"
+
+atomic_t pau_qps_created;
+atomic_t pau_qps_destroyed;
+
+static void nes_replenish_mgt_rq(struct nes_vnic_mgt *mgtvnic)
+{
+ unsigned long flags;
+ dma_addr_t bus_address;
+ struct sk_buff *skb;
+ struct nes_hw_nic_rq_wqe *nic_rqe;
+ struct nes_hw_mgt *nesmgt;
+ struct nes_device *nesdev;
+ struct nes_rskb_cb *cb;
+ u32 rx_wqes_posted = 0;
+
+ nesmgt = &mgtvnic->mgt;
+ nesdev = mgtvnic->nesvnic->nesdev;
+ spin_lock_irqsave(&nesmgt->rq_lock, flags);
+ if (nesmgt->replenishing_rq != 0) {
+ if (((nesmgt->rq_size - 1) == atomic_read(&mgtvnic->rx_skbs_needed)) &&
+ (atomic_read(&mgtvnic->rx_skb_timer_running) == 0)) {
+ atomic_set(&mgtvnic->rx_skb_timer_running, 1);
+ spin_unlock_irqrestore(&nesmgt->rq_lock, flags);
+ mgtvnic->rq_wqes_timer.expires = jiffies + (HZ / 2); /* 1/2 second */
+ add_timer(&mgtvnic->rq_wqes_timer);
+ } else {
+ spin_unlock_irqrestore(&nesmgt->rq_lock, flags);
+ }
+ return;
+ }
+ nesmgt->replenishing_rq = 1;
+ spin_unlock_irqrestore(&nesmgt->rq_lock, flags);
+ do {
+ skb = dev_alloc_skb(mgtvnic->nesvnic->max_frame_size);
+ if (skb) {
+ skb->dev = mgtvnic->nesvnic->netdev;
+
+ bus_address = pci_map_single(nesdev->pcidev,
+ skb->data, mgtvnic->nesvnic->max_frame_size, PCI_DMA_FROMDEVICE);
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ cb->busaddr = bus_address;
+ cb->maplen = mgtvnic->nesvnic->max_frame_size;
+
+ nic_rqe = &nesmgt->rq_vbase[mgtvnic->mgt.rq_head];
+ nic_rqe->wqe_words[NES_NIC_RQ_WQE_LENGTH_1_0_IDX] =
+ cpu_to_le32(mgtvnic->nesvnic->max_frame_size);
+ nic_rqe->wqe_words[NES_NIC_RQ_WQE_LENGTH_3_2_IDX] = 0;
+ nic_rqe->wqe_words[NES_NIC_RQ_WQE_FRAG0_LOW_IDX] =
+ cpu_to_le32((u32)bus_address);
+ nic_rqe->wqe_words[NES_NIC_RQ_WQE_FRAG0_HIGH_IDX] =
+ cpu_to_le32((u32)((u64)bus_address >> 32));
+ nesmgt->rx_skb[nesmgt->rq_head] = skb;
+ nesmgt->rq_head++;
+ nesmgt->rq_head &= nesmgt->rq_size - 1;
+ atomic_dec(&mgtvnic->rx_skbs_needed);
+ barrier();
+ if (++rx_wqes_posted == 255) {
+ nes_write32(nesdev->regs + NES_WQE_ALLOC, (rx_wqes_posted << 24) | nesmgt->qp_id);
+ rx_wqes_posted = 0;
+ }
+ } else {
+ spin_lock_irqsave(&nesmgt->rq_lock, flags);
+ if (((nesmgt->rq_size - 1) == atomic_read(&mgtvnic->rx_skbs_needed)) &&
+ (atomic_read(&mgtvnic->rx_skb_timer_running) == 0)) {
+ atomic_set(&mgtvnic->rx_skb_timer_running, 1);
+ spin_unlock_irqrestore(&nesmgt->rq_lock, flags);
+ mgtvnic->rq_wqes_timer.expires = jiffies + (HZ / 2); /* 1/2 second */
+ add_timer(&mgtvnic->rq_wqes_timer);
+ } else {
+ spin_unlock_irqrestore(&nesmgt->rq_lock, flags);
+ }
+ break;
+ }
+ } while (atomic_read(&mgtvnic->rx_skbs_needed));
+ barrier();
+ if (rx_wqes_posted)
+ nes_write32(nesdev->regs + NES_WQE_ALLOC, (rx_wqes_posted << 24) | nesmgt->qp_id);
+ nesmgt->replenishing_rq = 0;
+}
+
+/**
+ * nes_mgt_rq_wqes_timeout
+ */
+static void nes_mgt_rq_wqes_timeout(unsigned long parm)
+{
+ struct nes_vnic_mgt *mgtvnic = (struct nes_vnic_mgt *)parm;
+
+ atomic_set(&mgtvnic->rx_skb_timer_running, 0);
+ if (atomic_read(&mgtvnic->rx_skbs_needed))
+ nes_replenish_mgt_rq(mgtvnic);
+}
+
+/**
+ * nes_mgt_free_skb - unmap and free skb
+ */
+static void nes_mgt_free_skb(struct nes_device *nesdev, struct sk_buff *skb, u32 dir)
+{
+ struct nes_rskb_cb *cb;
+
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ pci_unmap_single(nesdev->pcidev, cb->busaddr, cb->maplen, dir);
+ cb->busaddr = 0;
+ dev_kfree_skb_any(skb);
+}
+
+/**
+ * nes_download_callback - handle download completions
+ */
+static void nes_download_callback(struct nes_device *nesdev, struct nes_cqp_request *cqp_request)
+{
+ struct pau_fpdu_info *fpdu_info = cqp_request->cqp_callback_pointer;
+ struct nes_qp *nesqp = fpdu_info->nesqp;
+ struct sk_buff *skb;
+ int i;
+
+ for (i = 0; i < fpdu_info->frag_cnt; i++) {
+ skb = fpdu_info->frags[i].skb;
+ if (fpdu_info->frags[i].cmplt) {
+ nes_mgt_free_skb(nesdev, skb, PCI_DMA_TODEVICE);
+ nes_rem_ref_cm_node(nesqp->cm_node);
+ }
+ }
+
+ if (fpdu_info->hdr_vbase)
+ pci_free_consistent(nesdev->pcidev, fpdu_info->hdr_len,
+ fpdu_info->hdr_vbase, fpdu_info->hdr_pbase);
+ kfree(fpdu_info);
+}
+
+/**
+ * nes_get_seq - Get the seq, ack_seq and window from the packet
+ */
+static u32 nes_get_seq(struct sk_buff *skb, u32 *ack, u16 *wnd, u32 *fin_rcvd, u32 *rst_rcvd)
+{
+ struct nes_rskb_cb *cb = (struct nes_rskb_cb *)&skb->cb[0];
+ struct iphdr *iph = (struct iphdr *)(cb->data_start + ETH_HLEN);
+ struct tcphdr *tcph = (struct tcphdr *)(((char *)iph) + (4 * iph->ihl));
+
+ *ack = be32_to_cpu(tcph->ack_seq);
+ *wnd = be16_to_cpu(tcph->window);
+ *fin_rcvd = tcph->fin;
+ *rst_rcvd = tcph->rst;
+ return be32_to_cpu(tcph->seq);
+}
+
+/**
+ * nes_get_next_skb - Get the next skb based on where current skb is in the queue
+ */
+static struct sk_buff *nes_get_next_skb(struct nes_device *nesdev, struct nes_qp *nesqp,
+ struct sk_buff *skb, u32 nextseq, u32 *ack,
+ u16 *wnd, u32 *fin_rcvd, u32 *rst_rcvd)
+{
+ u32 seq;
+ bool processacks;
+ struct sk_buff *old_skb;
+
+ if (skb) {
+ /* Continue processing fpdu */
+ if (skb->next == (struct sk_buff *)&nesqp->pau_list)
+ goto out;
+ skb = skb->next;
+ processacks = false;
+ } else {
+ /* Starting a new one */
+ if (skb_queue_empty(&nesqp->pau_list))
+ goto out;
+ skb = skb_peek(&nesqp->pau_list);
+ processacks = true;
+ }
+
+ while (1) {
+ seq = nes_get_seq(skb, ack, wnd, fin_rcvd, rst_rcvd);
+ if (seq == nextseq) {
+ if (skb->len || processacks)
+ break;
+ } else if (after(seq, nextseq)) {
+ goto out;
+ }
+
+ if (skb->next == (struct sk_buff *)&nesqp->pau_list)
+ goto out;
+
+ old_skb = skb;
+ skb = skb->next;
+ skb_unlink(old_skb, &nesqp->pau_list);
+ nes_mgt_free_skb(nesdev, old_skb, PCI_DMA_TODEVICE);
+ nes_rem_ref_cm_node(nesqp->cm_node);
+ }
+ return skb;
+
+out:
+ return NULL;
+}
+
+/**
+ * get_fpdu_info - Find the next complete fpdu and return its fragments.
+ */
+static int get_fpdu_info(struct nes_device *nesdev, struct nes_qp *nesqp,
+ struct pau_fpdu_info **pau_fpdu_info)
+{
+ struct sk_buff *skb;
+ struct iphdr *iph;
+ struct tcphdr *tcph;
+ struct nes_rskb_cb *cb;
+ struct pau_fpdu_info *fpdu_info = NULL;
+ struct pau_fpdu_frag frags[MAX_FPDU_FRAGS];
+ unsigned long flags;
+ u32 fpdu_len = 0;
+ u32 tmp_len;
+ int frag_cnt = 0;
+ u32 tot_len;
+ u32 frag_tot;
+ u32 ack;
+ u32 fin_rcvd;
+ u32 rst_rcvd;
+ u16 wnd;
+ int i;
+ int rc = 0;
+
+ *pau_fpdu_info = NULL;
+
+ spin_lock_irqsave(&nesqp->pau_lock, flags);
+ skb = nes_get_next_skb(nesdev, nesqp, NULL, nesqp->pau_rcv_nxt, &ack, &wnd, &fin_rcvd, &rst_rcvd);
+ if (!skb) {
+ spin_unlock_irqrestore(&nesqp->pau_lock, flags);
+ goto out;
+ }
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ if (skb->len) {
+ fpdu_len = be16_to_cpu(*(__be16 *) skb->data) + MPA_FRAMING;
+ fpdu_len = (fpdu_len + 3) & 0xfffffffc;
+ tmp_len = fpdu_len;
+
+ /* See if we have all of the fpdu */
+ frag_tot = 0;
+ memset(&frags, 0, sizeof frags);
+ for (i = 0; i < MAX_FPDU_FRAGS; i++) {
+ frags[i].physaddr = cb->busaddr;
+ frags[i].physaddr += skb->data - cb->data_start;
+ frags[i].frag_len = min(tmp_len, skb->len);
+ frags[i].skb = skb;
+ frags[i].cmplt = (skb->len == frags[i].frag_len);
+ frag_tot += frags[i].frag_len;
+ frag_cnt++;
+
+ tmp_len -= frags[i].frag_len;
+ if (tmp_len == 0)
+ break;
+
+ skb = nes_get_next_skb(nesdev, nesqp, skb,
+ nesqp->pau_rcv_nxt + frag_tot, &ack, &wnd, &fin_rcvd, &rst_rcvd);
+ if (!skb) {
+ spin_unlock_irqrestore(&nesqp->pau_lock, flags);
+ goto out;
+ } else if (rst_rcvd) {
+ /* rst received in the middle of fpdu */
+ for (; i >= 0; i--) {
+ skb_unlink(frags[i].skb, &nesqp->pau_list);
+ nes_mgt_free_skb(nesdev, frags[i].skb, PCI_DMA_TODEVICE);
+ }
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ frags[0].physaddr = cb->busaddr;
+ frags[0].physaddr += skb->data - cb->data_start;
+ frags[0].frag_len = skb->len;
+ frags[0].skb = skb;
+ frags[0].cmplt = true;
+ frag_cnt = 1;
+ break;
+ }
+
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ }
+ } else {
+ /* no data */
+ frags[0].physaddr = cb->busaddr;
+ frags[0].frag_len = 0;
+ frags[0].skb = skb;
+ frags[0].cmplt = true;
+ frag_cnt = 1;
+ }
+
+ spin_unlock_irqrestore(&nesqp->pau_lock, flags);
+
+ /* Found one */
+ fpdu_info = kzalloc(sizeof(*fpdu_info), GFP_ATOMIC);
+ if (fpdu_info == NULL) {
+ nes_debug(NES_DBG_PAU, "Failed to alloc a fpdu_info.\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ fpdu_info->cqp_request = nes_get_cqp_request(nesdev);
+ if (fpdu_info->cqp_request == NULL) {
+ nes_debug(NES_DBG_PAU, "Failed to get a cqp_request.\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ cb = (struct nes_rskb_cb *)&frags[0].skb->cb[0];
+ iph = (struct iphdr *)(cb->data_start + ETH_HLEN);
+ tcph = (struct tcphdr *)(((char *)iph) + (4 * iph->ihl));
+ fpdu_info->hdr_len = (((unsigned char *)tcph) + 4 * (tcph->doff)) - cb->data_start;
+ fpdu_info->data_len = fpdu_len;
+ tot_len = fpdu_info->hdr_len + fpdu_len - ETH_HLEN;
+
+ if (frags[0].cmplt) {
+ fpdu_info->hdr_pbase = cb->busaddr;
+ fpdu_info->hdr_vbase = NULL;
+ } else {
+ fpdu_info->hdr_vbase = pci_alloc_consistent(nesdev->pcidev,
+ fpdu_info->hdr_len, &fpdu_info->hdr_pbase);
+ if (!fpdu_info->hdr_vbase) {
+ nes_debug(NES_DBG_PAU, "Unable to allocate memory for pau first frag\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Copy hdrs, adjusting len and seqnum */
+ memcpy(fpdu_info->hdr_vbase, cb->data_start, fpdu_info->hdr_len);
+ iph = (struct iphdr *)(fpdu_info->hdr_vbase + ETH_HLEN);
+ tcph = (struct tcphdr *)(((char *)iph) + (4 * iph->ihl));
+ }
+
+ iph->tot_len = cpu_to_be16(tot_len);
+ iph->saddr = cpu_to_be32(0x7f000001);
+
+ tcph->seq = cpu_to_be32(nesqp->pau_rcv_nxt);
+ tcph->ack_seq = cpu_to_be32(ack);
+ tcph->window = cpu_to_be16(wnd);
+
+ nesqp->pau_rcv_nxt += fpdu_len + fin_rcvd;
+
+ memcpy(fpdu_info->frags, frags, sizeof(fpdu_info->frags));
+ fpdu_info->frag_cnt = frag_cnt;
+ fpdu_info->nesqp = nesqp;
+ *pau_fpdu_info = fpdu_info;
+
+ /* Update skb's for next pass */
+ for (i = 0; i < frag_cnt; i++) {
+ cb = (struct nes_rskb_cb *)&frags[i].skb->cb[0];
+ skb_pull(frags[i].skb, frags[i].frag_len);
+
+ if (frags[i].skb->len == 0) {
+ /* Pull skb off the list - it will be freed in the callback */
+ spin_lock_irqsave(&nesqp->pau_lock, flags);
+ skb_unlink(frags[i].skb, &nesqp->pau_list);
+ spin_unlock_irqrestore(&nesqp->pau_lock, flags);
+ } else {
+ /* Last skb still has data so update the seq */
+ iph = (struct iphdr *)(cb->data_start + ETH_HLEN);
+ tcph = (struct tcphdr *)(((char *)iph) + (4 * iph->ihl));
+ tcph->seq = cpu_to_be32(nesqp->pau_rcv_nxt);
+ }
+ }
+
+out:
+ if (rc) {
+ if (fpdu_info) {
+ if (fpdu_info->cqp_request)
+ nes_put_cqp_request(nesdev, fpdu_info->cqp_request);
+ kfree(fpdu_info);
+ }
+ }
+ return rc;
+}
+
+/**
+ * forward_fpdu - send complete fpdus, one at a time
+ */
+static int forward_fpdus(struct nes_vnic *nesvnic, struct nes_qp *nesqp)
+{
+ struct nes_device *nesdev = nesvnic->nesdev;
+ struct pau_fpdu_info *fpdu_info;
+ struct nes_hw_cqp_wqe *cqp_wqe;
+ struct nes_cqp_request *cqp_request;
+ u64 u64tmp;
+ u32 u32tmp;
+ int rc;
+
+ while (1) {
+ rc = get_fpdu_info(nesdev, nesqp, &fpdu_info);
+ if (fpdu_info == NULL)
+ return rc;
+
+ cqp_request = fpdu_info->cqp_request;
+ cqp_wqe = &cqp_request->cqp_wqe;
+ nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_DL_OPCODE_IDX,
+ NES_CQP_DOWNLOAD_SEGMENT |
+ (((u32)nesvnic->logical_port) << NES_CQP_OP_LOGICAL_PORT_SHIFT));
+
+ u32tmp = fpdu_info->hdr_len << 16;
+ u32tmp |= fpdu_info->hdr_len + (u32)fpdu_info->data_len;
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_DL_LENGTH_0_TOTAL_IDX,
+ u32tmp);
+
+ u32tmp = (fpdu_info->frags[1].frag_len << 16) | fpdu_info->frags[0].frag_len;
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_LENGTH_2_1_IDX,
+ u32tmp);
+
+ u32tmp = (fpdu_info->frags[3].frag_len << 16) | fpdu_info->frags[2].frag_len;
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_LENGTH_4_3_IDX,
+ u32tmp);
+
+ u64tmp = (u64)fpdu_info->hdr_pbase;
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG0_LOW_IDX,
+ lower_32_bits(u64tmp));
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG0_HIGH_IDX,
+ upper_32_bits(u64tmp >> 32));
+
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG1_LOW_IDX,
+ lower_32_bits(fpdu_info->frags[0].physaddr));
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG1_HIGH_IDX,
+ upper_32_bits(fpdu_info->frags[0].physaddr));
+
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG2_LOW_IDX,
+ lower_32_bits(fpdu_info->frags[1].physaddr));
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG2_HIGH_IDX,
+ upper_32_bits(fpdu_info->frags[1].physaddr));
+
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG3_LOW_IDX,
+ lower_32_bits(fpdu_info->frags[2].physaddr));
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG3_HIGH_IDX,
+ upper_32_bits(fpdu_info->frags[2].physaddr));
+
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG4_LOW_IDX,
+ lower_32_bits(fpdu_info->frags[3].physaddr));
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_NIC_SQ_WQE_FRAG4_HIGH_IDX,
+ upper_32_bits(fpdu_info->frags[3].physaddr));
+
+ cqp_request->cqp_callback_pointer = fpdu_info;
+ cqp_request->callback = 1;
+ cqp_request->cqp_callback = nes_download_callback;
+
+ atomic_set(&cqp_request->refcount, 1);
+ nes_post_cqp_request(nesdev, cqp_request);
+ }
+
+ return 0;
+}
+
+static void process_fpdus(struct nes_vnic *nesvnic, struct nes_qp *nesqp)
+{
+ int again = 1;
+ unsigned long flags;
+
+ do {
+ /* Ignore rc - if it failed, tcp retries will cause it to try again */
+ forward_fpdus(nesvnic, nesqp);
+
+ spin_lock_irqsave(&nesqp->pau_lock, flags);
+ if (nesqp->pau_pending) {
+ nesqp->pau_pending = 0;
+ } else {
+ nesqp->pau_busy = 0;
+ again = 0;
+ }
+
+ spin_unlock_irqrestore(&nesqp->pau_lock, flags);
+ } while (again);
+}
+
+/**
+ * queue_fpdus - Handle fpdu's that hw passed up to sw
+ */
+static void queue_fpdus(struct sk_buff *skb, struct nes_vnic *nesvnic, struct nes_qp *nesqp)
+{
+ struct sk_buff *tmpskb;
+ struct nes_rskb_cb *cb;
+ struct iphdr *iph;
+ struct tcphdr *tcph;
+ unsigned char *tcph_end;
+ u32 rcv_nxt;
+ u32 rcv_wnd;
+ u32 seqnum;
+ u32 len;
+ bool process_it = false;
+ unsigned long flags;
+
+ /* Move data ptr to after tcp header */
+ iph = (struct iphdr *)skb->data;
+ tcph = (struct tcphdr *)(((char *)iph) + (4 * iph->ihl));
+ seqnum = be32_to_cpu(tcph->seq);
+ tcph_end = (((char *)tcph) + (4 * tcph->doff));
+
+ len = be16_to_cpu(iph->tot_len);
+ if (skb->len > len)
+ skb_trim(skb, len);
+ skb_pull(skb, tcph_end - skb->data);
+
+ /* Initialize tracking values */
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ cb->seqnum = seqnum;
+
+ /* Make sure data is in the receive window */
+ rcv_nxt = nesqp->pau_rcv_nxt;
+ rcv_wnd = le32_to_cpu(nesqp->nesqp_context->rcv_wnd);
+ if (!between(seqnum, rcv_nxt, (rcv_nxt + rcv_wnd))) {
+ nes_mgt_free_skb(nesvnic->nesdev, skb, PCI_DMA_TODEVICE);
+ nes_rem_ref_cm_node(nesqp->cm_node);
+ return;
+ }
+
+ spin_lock_irqsave(&nesqp->pau_lock, flags);
+
+ if (nesqp->pau_busy)
+ nesqp->pau_pending = 1;
+ else
+ nesqp->pau_busy = 1;
+
+ /* Queue skb by sequence number */
+ if (skb_queue_len(&nesqp->pau_list) == 0) {
+ skb_queue_head(&nesqp->pau_list, skb);
+ } else {
+ tmpskb = nesqp->pau_list.next;
+ while (tmpskb != (struct sk_buff *)&nesqp->pau_list) {
+ cb = (struct nes_rskb_cb *)&tmpskb->cb[0];
+ if (before(seqnum, cb->seqnum))
+ break;
+ tmpskb = tmpskb->next;
+ }
+ skb_insert(tmpskb, skb, &nesqp->pau_list);
+ }
+ if (nesqp->pau_state == PAU_READY)
+ process_it = true;
+ spin_unlock_irqrestore(&nesqp->pau_lock, flags);
+
+ if (process_it)
+ process_fpdus(nesvnic, nesqp);
+
+ return;
+}
+
+/**
+ * mgt_thread - Handle mgt skbs in a safe context
+ */
+static int mgt_thread(void *context)
+{
+ struct nes_vnic *nesvnic = context;
+ struct sk_buff *skb;
+ struct nes_rskb_cb *cb;
+
+ while (!kthread_should_stop()) {
+ wait_event_interruptible(nesvnic->mgt_wait_queue,
+ skb_queue_len(&nesvnic->mgt_skb_list) || kthread_should_stop());
+ while ((skb_queue_len(&nesvnic->mgt_skb_list)) && !kthread_should_stop()) {
+ skb = skb_dequeue(&nesvnic->mgt_skb_list);
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ cb->data_start = skb->data - ETH_HLEN;
+ cb->busaddr = pci_map_single(nesvnic->nesdev->pcidev, cb->data_start,
+ nesvnic->max_frame_size, PCI_DMA_TODEVICE);
+ queue_fpdus(skb, nesvnic, cb->nesqp);
+ }
+ }
+
+ /* Closing down so delete any entries on the queue */
+ while (skb_queue_len(&nesvnic->mgt_skb_list)) {
+ skb = skb_dequeue(&nesvnic->mgt_skb_list);
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ nes_rem_ref_cm_node(cb->nesqp->cm_node);
+ dev_kfree_skb_any(skb);
+ }
+ return 0;
+}
+
+/**
+ * nes_queue_skbs - Queue skb so it can be handled in a thread context
+ */
+void nes_queue_mgt_skbs(struct sk_buff *skb, struct nes_vnic *nesvnic, struct nes_qp *nesqp)
+{
+ struct nes_rskb_cb *cb;
+
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ cb->nesqp = nesqp;
+ skb_queue_tail(&nesvnic->mgt_skb_list, skb);
+ wake_up_interruptible(&nesvnic->mgt_wait_queue);
+}
+
+void nes_destroy_pau_qp(struct nes_device *nesdev, struct nes_qp *nesqp)
+{
+ struct sk_buff *skb;
+ unsigned long flags;
+ atomic_inc(&pau_qps_destroyed);
+
+ /* Free packets that have not yet been forwarded */
+ /* Lock is acquired by skb_dequeue when removing the skb */
+ spin_lock_irqsave(&nesqp->pau_lock, flags);
+ while (skb_queue_len(&nesqp->pau_list)) {
+ skb = skb_dequeue(&nesqp->pau_list);
+ nes_mgt_free_skb(nesdev, skb, PCI_DMA_TODEVICE);
+ nes_rem_ref_cm_node(nesqp->cm_node);
+ }
+ spin_unlock_irqrestore(&nesqp->pau_lock, flags);
+}
+
+static void nes_chg_qh_handler(struct nes_device *nesdev, struct nes_cqp_request *cqp_request)
+{
+ struct pau_qh_chg *qh_chg = cqp_request->cqp_callback_pointer;
+ struct nes_cqp_request *new_request;
+ struct nes_hw_cqp_wqe *cqp_wqe;
+ struct nes_adapter *nesadapter;
+ struct nes_qp *nesqp;
+ struct nes_v4_quad nes_quad;
+ u32 crc_value;
+ u64 u64temp;
+
+ nesadapter = nesdev->nesadapter;
+ nesqp = qh_chg->nesqp;
+
+ /* Should we handle the bad completion */
+ if (cqp_request->major_code) {
+ printk(KERN_ERR PFX "Invalid cqp_request major_code=0x%x\n",
+ cqp_request->major_code);
+ WARN_ON(1);
+ }
+
+ switch (nesqp->pau_state) {
+ case PAU_DEL_QH:
+ /* Old hash code deleted, now set the new one */
+ nesqp->pau_state = PAU_ADD_LB_QH;
+ new_request = nes_get_cqp_request(nesdev);
+ if (new_request == NULL) {
+ nes_debug(NES_DBG_PAU, "Failed to get a new_request.\n");
+ WARN_ON(1);
+ return;
+ }
+
+ memset(&nes_quad, 0, sizeof(nes_quad));
+ nes_quad.DstIpAdrIndex =
+ cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
+ nes_quad.SrcIpadr = cpu_to_be32(0x7f000001);
+ nes_quad.TcpPorts[0] = swab16(nesqp->nesqp_context->tcpPorts[1]);
+ nes_quad.TcpPorts[1] = swab16(nesqp->nesqp_context->tcpPorts[0]);
+
+ /* Produce hash key */
+ crc_value = get_crc_value(&nes_quad);
+ nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
+ nes_debug(NES_DBG_PAU, "new HTE Index = 0x%08X, CRC = 0x%08X\n",
+ nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask);
+
+ nesqp->hte_index &= nesadapter->hte_index_mask;
+ nesqp->nesqp_context->hte_index = cpu_to_le32(nesqp->hte_index);
+ nesqp->nesqp_context->ip0 = cpu_to_le32(0x7f000001);
+ nesqp->nesqp_context->rcv_nxt = cpu_to_le32(nesqp->pau_rcv_nxt);
+
+ cqp_wqe = &new_request->cqp_wqe;
+ nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+ set_wqe_32bit_value(cqp_wqe->wqe_words,
+ NES_CQP_WQE_OPCODE_IDX, NES_CQP_MANAGE_QUAD_HASH |
+ NES_CQP_QP_TYPE_IWARP | NES_CQP_QP_CONTEXT_VALID | NES_CQP_QP_IWARP_STATE_RTS);
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX, nesqp->hwqp.qp_id);
+ u64temp = (u64)nesqp->nesqp_context_pbase;
+ set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, u64temp);
+
+ nes_debug(NES_DBG_PAU, "Waiting for CQP completion for adding the quad hash.\n");
+
+ new_request->cqp_callback_pointer = qh_chg;
+ new_request->callback = 1;
+ new_request->cqp_callback = nes_chg_qh_handler;
+ atomic_set(&new_request->refcount, 1);
+ nes_post_cqp_request(nesdev, new_request);
+ break;
+
+ case PAU_ADD_LB_QH:
+ /* Start processing the queued fpdu's */
+ nesqp->pau_state = PAU_READY;
+ process_fpdus(qh_chg->nesvnic, qh_chg->nesqp);
+ kfree(qh_chg);
+ break;
+ }
+}
+
+/**
+ * nes_change_quad_hash
+ */
+static int nes_change_quad_hash(struct nes_device *nesdev,
+ struct nes_vnic *nesvnic, struct nes_qp *nesqp)
+{
+ struct nes_cqp_request *cqp_request = NULL;
+ struct pau_qh_chg *qh_chg = NULL;
+ u64 u64temp;
+ struct nes_hw_cqp_wqe *cqp_wqe;
+ int ret = 0;
+
+ cqp_request = nes_get_cqp_request(nesdev);
+ if (cqp_request == NULL) {
+ nes_debug(NES_DBG_PAU, "Failed to get a cqp_request.\n");
+ ret = -ENOMEM;
+ goto chg_qh_err;
+ }
+
+ qh_chg = kmalloc(sizeof *qh_chg, GFP_ATOMIC);
+ if (qh_chg == NULL) {
+ nes_debug(NES_DBG_PAU, "Failed to get a cqp_request.\n");
+ ret = -ENOMEM;
+ goto chg_qh_err;
+ }
+ qh_chg->nesdev = nesdev;
+ qh_chg->nesvnic = nesvnic;
+ qh_chg->nesqp = nesqp;
+ nesqp->pau_state = PAU_DEL_QH;
+
+ cqp_wqe = &cqp_request->cqp_wqe;
+ nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+ set_wqe_32bit_value(cqp_wqe->wqe_words,
+ NES_CQP_WQE_OPCODE_IDX, NES_CQP_MANAGE_QUAD_HASH | NES_CQP_QP_DEL_HTE |
+ NES_CQP_QP_TYPE_IWARP | NES_CQP_QP_CONTEXT_VALID | NES_CQP_QP_IWARP_STATE_RTS);
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX, nesqp->hwqp.qp_id);
+ u64temp = (u64)nesqp->nesqp_context_pbase;
+ set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, u64temp);
+
+ nes_debug(NES_DBG_PAU, "Waiting for CQP completion for deleting the quad hash.\n");
+
+ cqp_request->cqp_callback_pointer = qh_chg;
+ cqp_request->callback = 1;
+ cqp_request->cqp_callback = nes_chg_qh_handler;
+ atomic_set(&cqp_request->refcount, 1);
+ nes_post_cqp_request(nesdev, cqp_request);
+
+ return ret;
+
+chg_qh_err:
+ kfree(qh_chg);
+ if (cqp_request)
+ nes_put_cqp_request(nesdev, cqp_request);
+ return ret;
+}
+
+/**
+ * nes_mgt_ce_handler
+ * This management code deals with any packed and unaligned (pau) fpdu's
+ * that the hardware cannot handle.
+ */
+static void nes_mgt_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq)
+{
+ struct nes_vnic_mgt *mgtvnic = container_of(cq, struct nes_vnic_mgt, mgt_cq);
+ struct nes_adapter *nesadapter = nesdev->nesadapter;
+ u32 head;
+ u32 cq_size;
+ u32 cqe_count = 0;
+ u32 cqe_misc;
+ u32 qp_id = 0;
+ u32 skbs_needed;
+ unsigned long context;
+ struct nes_qp *nesqp;
+ struct sk_buff *rx_skb;
+ struct nes_rskb_cb *cb;
+
+ head = cq->cq_head;
+ cq_size = cq->cq_size;
+
+ while (1) {
+ cqe_misc = le32_to_cpu(cq->cq_vbase[head].cqe_words[NES_NIC_CQE_MISC_IDX]);
+ if (!(cqe_misc & NES_NIC_CQE_VALID))
+ break;
+
+ nesqp = NULL;
+ if (cqe_misc & NES_NIC_CQE_ACCQP_VALID) {
+ qp_id = le32_to_cpu(cq->cq_vbase[head].cqe_words[NES_NIC_CQE_ACCQP_ID_IDX]);
+ qp_id &= 0x001fffff;
+ if (qp_id < nesadapter->max_qp) {
+ context = (unsigned long)nesadapter->qp_table[qp_id - NES_FIRST_QPN];
+ nesqp = (struct nes_qp *)context;
+ }
+ }
+
+ if (nesqp) {
+ if (nesqp->pau_mode == false) {
+ nesqp->pau_mode = true; /* First time for this qp */
+ nesqp->pau_rcv_nxt = le32_to_cpu(
+ cq->cq_vbase[head].cqe_words[NES_NIC_CQE_HASH_RCVNXT]);
+ skb_queue_head_init(&nesqp->pau_list);
+ spin_lock_init(&nesqp->pau_lock);
+ atomic_inc(&pau_qps_created);
+ nes_change_quad_hash(nesdev, mgtvnic->nesvnic, nesqp);
+ }
+
+ rx_skb = mgtvnic->mgt.rx_skb[mgtvnic->mgt.rq_tail];
+ rx_skb->len = 0;
+ skb_put(rx_skb, cqe_misc & 0x0000ffff);
+ rx_skb->protocol = eth_type_trans(rx_skb, mgtvnic->nesvnic->netdev);
+ cb = (struct nes_rskb_cb *)&rx_skb->cb[0];
+ pci_unmap_single(nesdev->pcidev, cb->busaddr, cb->maplen, PCI_DMA_FROMDEVICE);
+ cb->busaddr = 0;
+ mgtvnic->mgt.rq_tail++;
+ mgtvnic->mgt.rq_tail &= mgtvnic->mgt.rq_size - 1;
+
+ nes_add_ref_cm_node(nesqp->cm_node);
+ nes_queue_mgt_skbs(rx_skb, mgtvnic->nesvnic, nesqp);
+ } else {
+ printk(KERN_ERR PFX "Invalid QP %d for packed/unaligned handling\n", qp_id);
+ }
+
+ cq->cq_vbase[head].cqe_words[NES_NIC_CQE_MISC_IDX] = 0;
+ cqe_count++;
+ if (++head >= cq_size)
+ head = 0;
+
+ if (cqe_count == 255) {
+ /* Replenish mgt CQ */
+ nes_write32(nesdev->regs + NES_CQE_ALLOC, cq->cq_number | (cqe_count << 16));
+ nesdev->currcq_count += cqe_count;
+ cqe_count = 0;
+ }
+
+ skbs_needed = atomic_inc_return(&mgtvnic->rx_skbs_needed);
+ if (skbs_needed > (mgtvnic->mgt.rq_size >> 1))
+ nes_replenish_mgt_rq(mgtvnic);
+ }
+
+ cq->cq_head = head;
+ nes_write32(nesdev->regs + NES_CQE_ALLOC, NES_CQE_ALLOC_NOTIFY_NEXT |
+ cq->cq_number | (cqe_count << 16));
+ nes_read32(nesdev->regs + NES_CQE_ALLOC);
+ nesdev->currcq_count += cqe_count;
+}
+
+/**
+ * nes_init_mgt_qp
+ */
+int nes_init_mgt_qp(struct nes_device *nesdev, struct net_device *netdev, struct nes_vnic *nesvnic)
+{
+ struct nes_vnic_mgt *mgtvnic;
+ u32 counter;
+ void *vmem;
+ dma_addr_t pmem;
+ struct nes_hw_cqp_wqe *cqp_wqe;
+ u32 cqp_head;
+ unsigned long flags;
+ struct nes_hw_nic_qp_context *mgt_context;
+ u64 u64temp;
+ struct nes_hw_nic_rq_wqe *mgt_rqe;
+ struct sk_buff *skb;
+ u32 wqe_count;
+ struct nes_rskb_cb *cb;
+ u32 mgt_mem_size;
+ void *mgt_vbase;
+ dma_addr_t mgt_pbase;
+ int i;
+ int ret;
+
+ /* Allocate space the all mgt QPs once */
+ mgtvnic = kzalloc(NES_MGT_QP_COUNT * sizeof(struct nes_vnic_mgt), GFP_KERNEL);
+ if (mgtvnic == NULL) {
+ nes_debug(NES_DBG_INIT, "Unable to allocate memory for mgt structure\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate fragment, RQ, and CQ; Reuse CEQ based on the PCI function */
+ /* We are not sending from this NIC so sq is not allocated */
+ mgt_mem_size = 256 +
+ (NES_MGT_WQ_COUNT * sizeof(struct nes_hw_nic_rq_wqe)) +
+ (NES_MGT_WQ_COUNT * sizeof(struct nes_hw_nic_cqe)) +
+ sizeof(struct nes_hw_nic_qp_context);
+ mgt_mem_size = (mgt_mem_size + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1);
+ mgt_vbase = pci_alloc_consistent(nesdev->pcidev, NES_MGT_QP_COUNT * mgt_mem_size, &mgt_pbase);
+ if (!mgt_vbase) {
+ kfree(mgtvnic);
+ nes_debug(NES_DBG_INIT, "Unable to allocate memory for mgt host descriptor rings\n");
+ return -ENOMEM;
+ }
+
+ nesvnic->mgt_mem_size = NES_MGT_QP_COUNT * mgt_mem_size;
+ nesvnic->mgt_vbase = mgt_vbase;
+ nesvnic->mgt_pbase = mgt_pbase;
+
+ skb_queue_head_init(&nesvnic->mgt_skb_list);
+ init_waitqueue_head(&nesvnic->mgt_wait_queue);
+ nesvnic->mgt_thread = kthread_run(mgt_thread, nesvnic, "nes_mgt_thread");
+
+ for (i = 0; i < NES_MGT_QP_COUNT; i++) {
+ mgtvnic->nesvnic = nesvnic;
+ mgtvnic->mgt.qp_id = nesdev->mac_index + NES_MGT_QP_OFFSET + i;
+ memset(mgt_vbase, 0, mgt_mem_size);
+ nes_debug(NES_DBG_INIT, "Allocated mgt QP structures at %p (phys = %016lX), size = %u.\n",
+ mgt_vbase, (unsigned long)mgt_pbase, mgt_mem_size);
+
+ vmem = (void *)(((unsigned long)mgt_vbase + (256 - 1)) &
+ ~(unsigned long)(256 - 1));
+ pmem = (dma_addr_t)(((unsigned long long)mgt_pbase + (256 - 1)) &
+ ~(unsigned long long)(256 - 1));
+
+ spin_lock_init(&mgtvnic->mgt.rq_lock);
+
+ /* setup the RQ */
+ mgtvnic->mgt.rq_vbase = vmem;
+ mgtvnic->mgt.rq_pbase = pmem;
+ mgtvnic->mgt.rq_head = 0;
+ mgtvnic->mgt.rq_tail = 0;
+ mgtvnic->mgt.rq_size = NES_MGT_WQ_COUNT;
+
+ /* setup the CQ */
+ vmem += (NES_MGT_WQ_COUNT * sizeof(struct nes_hw_nic_rq_wqe));
+ pmem += (NES_MGT_WQ_COUNT * sizeof(struct nes_hw_nic_rq_wqe));
+
+ mgtvnic->mgt_cq.cq_number = mgtvnic->mgt.qp_id;
+ mgtvnic->mgt_cq.cq_vbase = vmem;
+ mgtvnic->mgt_cq.cq_pbase = pmem;
+ mgtvnic->mgt_cq.cq_head = 0;
+ mgtvnic->mgt_cq.cq_size = NES_MGT_WQ_COUNT;
+
+ mgtvnic->mgt_cq.ce_handler = nes_mgt_ce_handler;
+
+ /* Send CreateCQ request to CQP */
+ spin_lock_irqsave(&nesdev->cqp.lock, flags);
+ cqp_head = nesdev->cqp.sq_head;
+
+ cqp_wqe = &nesdev->cqp.sq_vbase[cqp_head];
+ nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+
+ cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX] = cpu_to_le32(
+ NES_CQP_CREATE_CQ | NES_CQP_CQ_CEQ_VALID |
+ ((u32)mgtvnic->mgt_cq.cq_size << 16));
+ cqp_wqe->wqe_words[NES_CQP_WQE_ID_IDX] = cpu_to_le32(
+ mgtvnic->mgt_cq.cq_number | ((u32)nesdev->ceq_index << 16));
+ u64temp = (u64)mgtvnic->mgt_cq.cq_pbase;
+ set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_CQ_WQE_PBL_LOW_IDX, u64temp);
+ cqp_wqe->wqe_words[NES_CQP_CQ_WQE_CQ_CONTEXT_HIGH_IDX] = 0;
+ u64temp = (unsigned long)&mgtvnic->mgt_cq;
+ cqp_wqe->wqe_words[NES_CQP_CQ_WQE_CQ_CONTEXT_LOW_IDX] = cpu_to_le32((u32)(u64temp >> 1));
+ cqp_wqe->wqe_words[NES_CQP_CQ_WQE_CQ_CONTEXT_HIGH_IDX] =
+ cpu_to_le32(((u32)((u64temp) >> 33)) & 0x7FFFFFFF);
+ cqp_wqe->wqe_words[NES_CQP_CQ_WQE_DOORBELL_INDEX_HIGH_IDX] = 0;
+
+ if (++cqp_head >= nesdev->cqp.sq_size)
+ cqp_head = 0;
+ cqp_wqe = &nesdev->cqp.sq_vbase[cqp_head];
+ nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+
+ /* Send CreateQP request to CQP */
+ mgt_context = (void *)(&mgtvnic->mgt_cq.cq_vbase[mgtvnic->mgt_cq.cq_size]);
+ mgt_context->context_words[NES_NIC_CTX_MISC_IDX] =
+ cpu_to_le32((u32)NES_MGT_CTX_SIZE |
+ ((u32)PCI_FUNC(nesdev->pcidev->devfn) << 12));
+ nes_debug(NES_DBG_INIT, "RX_WINDOW_BUFFER_PAGE_TABLE_SIZE = 0x%08X, RX_WINDOW_BUFFER_SIZE = 0x%08X\n",
+ nes_read_indexed(nesdev, NES_IDX_RX_WINDOW_BUFFER_PAGE_TABLE_SIZE),
+ nes_read_indexed(nesdev, NES_IDX_RX_WINDOW_BUFFER_SIZE));
+ if (nes_read_indexed(nesdev, NES_IDX_RX_WINDOW_BUFFER_SIZE) != 0)
+ mgt_context->context_words[NES_NIC_CTX_MISC_IDX] |= cpu_to_le32(NES_NIC_BACK_STORE);
+
+ u64temp = (u64)mgtvnic->mgt.rq_pbase;
+ mgt_context->context_words[NES_NIC_CTX_SQ_LOW_IDX] = cpu_to_le32((u32)u64temp);
+ mgt_context->context_words[NES_NIC_CTX_SQ_HIGH_IDX] = cpu_to_le32((u32)(u64temp >> 32));
+ u64temp = (u64)mgtvnic->mgt.rq_pbase;
+ mgt_context->context_words[NES_NIC_CTX_RQ_LOW_IDX] = cpu_to_le32((u32)u64temp);
+ mgt_context->context_words[NES_NIC_CTX_RQ_HIGH_IDX] = cpu_to_le32((u32)(u64temp >> 32));
+
+ cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX] = cpu_to_le32(NES_CQP_CREATE_QP |
+ NES_CQP_QP_TYPE_NIC);
+ cqp_wqe->wqe_words[NES_CQP_WQE_ID_IDX] = cpu_to_le32(mgtvnic->mgt.qp_id);
+ u64temp = (u64)mgtvnic->mgt_cq.cq_pbase +
+ (mgtvnic->mgt_cq.cq_size * sizeof(struct nes_hw_nic_cqe));
+ set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, u64temp);
+
+ if (++cqp_head >= nesdev->cqp.sq_size)
+ cqp_head = 0;
+ nesdev->cqp.sq_head = cqp_head;
+
+ barrier();
+
+ /* Ring doorbell (2 WQEs) */
+ nes_write32(nesdev->regs + NES_WQE_ALLOC, 0x02800000 | nesdev->cqp.qp_id);
+
+ spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
+ nes_debug(NES_DBG_INIT, "Waiting for create MGT QP%u to complete.\n",
+ mgtvnic->mgt.qp_id);
+
+ ret = wait_event_timeout(nesdev->cqp.waitq, (nesdev->cqp.sq_tail == cqp_head),
+ NES_EVENT_TIMEOUT);
+ nes_debug(NES_DBG_INIT, "Create MGT QP%u completed, wait_event_timeout ret = %u.\n",
+ mgtvnic->mgt.qp_id, ret);
+ if (!ret) {
+ nes_debug(NES_DBG_INIT, "MGT QP%u create timeout expired\n", mgtvnic->mgt.qp_id);
+ if (i == 0) {
+ pci_free_consistent(nesdev->pcidev, nesvnic->mgt_mem_size, nesvnic->mgt_vbase,
+ nesvnic->mgt_pbase);
+ kfree(mgtvnic);
+ } else {
+ nes_destroy_mgt(nesvnic);
+ }
+ return -EIO;
+ }
+
+ /* Populate the RQ */
+ for (counter = 0; counter < (NES_MGT_WQ_COUNT - 1); counter++) {
+ skb = dev_alloc_skb(nesvnic->max_frame_size);
+ if (!skb) {
+ nes_debug(NES_DBG_INIT, "%s: out of memory for receive skb\n", netdev->name);
+ return -ENOMEM;
+ }
+
+ skb->dev = netdev;
+
+ pmem = pci_map_single(nesdev->pcidev, skb->data,
+ nesvnic->max_frame_size, PCI_DMA_FROMDEVICE);
+ cb = (struct nes_rskb_cb *)&skb->cb[0];
+ cb->busaddr = pmem;
+ cb->maplen = nesvnic->max_frame_size;
+
+ mgt_rqe = &mgtvnic->mgt.rq_vbase[counter];
+ mgt_rqe->wqe_words[NES_NIC_RQ_WQE_LENGTH_1_0_IDX] = cpu_to_le32((u32)nesvnic->max_frame_size);
+ mgt_rqe->wqe_words[NES_NIC_RQ_WQE_LENGTH_3_2_IDX] = 0;
+ mgt_rqe->wqe_words[NES_NIC_RQ_WQE_FRAG0_LOW_IDX] = cpu_to_le32((u32)pmem);
+ mgt_rqe->wqe_words[NES_NIC_RQ_WQE_FRAG0_HIGH_IDX] = cpu_to_le32((u32)((u64)pmem >> 32));
+ mgtvnic->mgt.rx_skb[counter] = skb;
+ }
+
+ init_timer(&mgtvnic->rq_wqes_timer);
+ mgtvnic->rq_wqes_timer.function = nes_mgt_rq_wqes_timeout;
+ mgtvnic->rq_wqes_timer.data = (unsigned long)mgtvnic;
+
+ wqe_count = NES_MGT_WQ_COUNT - 1;
+ mgtvnic->mgt.rq_head = wqe_count;
+ barrier();
+ do {
+ counter = min(wqe_count, ((u32)255));
+ wqe_count -= counter;
+ nes_write32(nesdev->regs + NES_WQE_ALLOC, (counter << 24) | mgtvnic->mgt.qp_id);
+ } while (wqe_count);
+
+ nes_write32(nesdev->regs + NES_CQE_ALLOC, NES_CQE_ALLOC_NOTIFY_NEXT |
+ mgtvnic->mgt_cq.cq_number);
+ nes_read32(nesdev->regs + NES_CQE_ALLOC);
+
+ mgt_vbase += mgt_mem_size;
+ mgt_pbase += mgt_mem_size;
+ nesvnic->mgtvnic[i] = mgtvnic++;
+ }
+ return 0;
+}
+
+
+void nes_destroy_mgt(struct nes_vnic *nesvnic)
+{
+ struct nes_device *nesdev = nesvnic->nesdev;
+ struct nes_vnic_mgt *mgtvnic;
+ struct nes_vnic_mgt *first_mgtvnic;
+ unsigned long flags;
+ struct nes_hw_cqp_wqe *cqp_wqe;
+ u32 cqp_head;
+ struct sk_buff *rx_skb;
+ int i;
+ int ret;
+
+ kthread_stop(nesvnic->mgt_thread);
+
+ /* Free remaining NIC receive buffers */
+ first_mgtvnic = nesvnic->mgtvnic[0];
+ for (i = 0; i < NES_MGT_QP_COUNT; i++) {
+ mgtvnic = nesvnic->mgtvnic[i];
+ if (mgtvnic == NULL)
+ continue;
+
+ while (mgtvnic->mgt.rq_head != mgtvnic->mgt.rq_tail) {
+ rx_skb = mgtvnic->mgt.rx_skb[mgtvnic->mgt.rq_tail];
+ nes_mgt_free_skb(nesdev, rx_skb, PCI_DMA_FROMDEVICE);
+ mgtvnic->mgt.rq_tail++;
+ mgtvnic->mgt.rq_tail &= (mgtvnic->mgt.rq_size - 1);
+ }
+
+ spin_lock_irqsave(&nesdev->cqp.lock, flags);
+
+ /* Destroy NIC QP */
+ cqp_head = nesdev->cqp.sq_head;
+ cqp_wqe = &nesdev->cqp.sq_vbase[cqp_head];
+ nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_OPCODE_IDX,
+ (NES_CQP_DESTROY_QP | NES_CQP_QP_TYPE_NIC));
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX,
+ mgtvnic->mgt.qp_id);
+
+ if (++cqp_head >= nesdev->cqp.sq_size)
+ cqp_head = 0;
+
+ cqp_wqe = &nesdev->cqp.sq_vbase[cqp_head];
+
+ /* Destroy NIC CQ */
+ nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_OPCODE_IDX,
+ (NES_CQP_DESTROY_CQ | ((u32)mgtvnic->mgt_cq.cq_size << 16)));
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX,
+ (mgtvnic->mgt_cq.cq_number | ((u32)nesdev->ceq_index << 16)));
+
+ if (++cqp_head >= nesdev->cqp.sq_size)
+ cqp_head = 0;
+
+ nesdev->cqp.sq_head = cqp_head;
+ barrier();
+
+ /* Ring doorbell (2 WQEs) */
+ nes_write32(nesdev->regs + NES_WQE_ALLOC, 0x02800000 | nesdev->cqp.qp_id);
+
+ spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
+ nes_debug(NES_DBG_SHUTDOWN, "Waiting for CQP, cqp_head=%u, cqp.sq_head=%u,"
+ " cqp.sq_tail=%u, cqp.sq_size=%u\n",
+ cqp_head, nesdev->cqp.sq_head,
+ nesdev->cqp.sq_tail, nesdev->cqp.sq_size);
+
+ ret = wait_event_timeout(nesdev->cqp.waitq, (nesdev->cqp.sq_tail == cqp_head),
+ NES_EVENT_TIMEOUT);
+
+ nes_debug(NES_DBG_SHUTDOWN, "Destroy MGT QP returned, wait_event_timeout ret = %u, cqp_head=%u,"
+ " cqp.sq_head=%u, cqp.sq_tail=%u\n",
+ ret, cqp_head, nesdev->cqp.sq_head, nesdev->cqp.sq_tail);
+ if (!ret)
+ nes_debug(NES_DBG_SHUTDOWN, "MGT QP%u destroy timeout expired\n",
+ mgtvnic->mgt.qp_id);
+
+ nesvnic->mgtvnic[i] = NULL;
+ }
+
+ if (nesvnic->mgt_vbase) {
+ pci_free_consistent(nesdev->pcidev, nesvnic->mgt_mem_size, nesvnic->mgt_vbase,
+ nesvnic->mgt_pbase);
+ nesvnic->mgt_vbase = NULL;
+ nesvnic->mgt_pbase = 0;
+ }
+
+ kfree(first_mgtvnic);
+}
diff --git a/drivers/infiniband/hw/nes/nes_mgt.h b/drivers/infiniband/hw/nes/nes_mgt.h
new file mode 100644
index 0000000..8c8af25
--- /dev/null
+++ b/drivers/infiniband/hw/nes/nes_mgt.h
@@ -0,0 +1,97 @@
+/*
+* Copyright (c) 2010 Intel-NE, Inc. All rights reserved.
+*
+* This software is available to you under a choice of one of two
+* licenses. You may choose to be licensed under the terms of the GNU
+* General Public License (GPL) Version 2, available from the file
+* COPYING in the main directory of this source tree, or the
+* OpenIB.org BSD license below:
+*
+* Redistribution and use in source and binary forms, with or
+* without modification, are permitted provided that the following
+* conditions are met:
+*
+* - Redistributions of source code must retain the above
+* copyright notice, this list of conditions and the following
+* disclaimer.
+*
+* - Redistributions in binary form must reproduce the above
+* copyright notice, this list of conditions and the following
+* disclaimer in the documentation and/or other materials
+* provided with the distribution.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+* SOFTWARE.
+*/
+
+#ifndef __NES_MGT_H
+#define __NES_MGT_H
+
+#define MPA_FRAMING 6 /* length is 2 bytes, crc is 4 bytes */
+
+int nes_init_mgt_qp(struct nes_device *nesdev, struct net_device *netdev, struct nes_vnic *nesvnic);
+void nes_queue_mgt_skbs(struct sk_buff *skb, struct nes_vnic *nesvnic, struct nes_qp *nesqp);
+void nes_destroy_mgt(struct nes_vnic *nesvnic);
+void nes_destroy_pau_qp(struct nes_device *nesdev, struct nes_qp *nesqp);
+
+struct nes_hw_mgt {
+ struct nes_hw_nic_rq_wqe *rq_vbase; /* virtual address of rq */
+ dma_addr_t rq_pbase; /* PCI memory for host rings */
+ struct sk_buff *rx_skb[NES_NIC_WQ_SIZE];
+ u16 qp_id;
+ u16 sq_head;
+ u16 rq_head;
+ u16 rq_tail;
+ u16 rq_size;
+ u8 replenishing_rq;
+ u8 reserved;
+ spinlock_t rq_lock;
+};
+
+struct nes_vnic_mgt {
+ struct nes_vnic *nesvnic;
+ struct nes_hw_mgt mgt;
+ struct nes_hw_nic_cq mgt_cq;
+ atomic_t rx_skbs_needed;
+ struct timer_list rq_wqes_timer;
+ atomic_t rx_skb_timer_running;
+};
+
+#define MAX_FPDU_FRAGS 4
+struct pau_fpdu_frag {
+ struct sk_buff *skb;
+ u64 physaddr;
+ u32 frag_len;
+ bool cmplt;
+};
+
+struct pau_fpdu_info {
+ struct nes_qp *nesqp;
+ struct nes_cqp_request *cqp_request;
+ void *hdr_vbase;
+ dma_addr_t hdr_pbase;
+ int hdr_len;
+ u16 data_len;
+ u16 frag_cnt;
+ struct pau_fpdu_frag frags[MAX_FPDU_FRAGS];
+};
+
+enum pau_qh_state {
+ PAU_DEL_QH,
+ PAU_ADD_LB_QH,
+ PAU_READY
+};
+
+struct pau_qh_chg {
+ struct nes_device *nesdev;
+ struct nes_vnic *nesvnic;
+ struct nes_qp *nesqp;
+};
+
+#endif /* __NES_MGT_H */
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 47b2ee4..c00d2f3 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1091,6 +1091,8 @@
"LRO aggregated",
"LRO flushed",
"LRO no_desc",
+ "PAU CreateQPs",
+ "PAU DestroyQPs",
};
#define NES_ETHTOOL_STAT_COUNT ARRAY_SIZE(nes_ethtool_stringset)
@@ -1306,6 +1308,8 @@
target_stat_values[++index] = nesvnic->lro_mgr.stats.aggregated;
target_stat_values[++index] = nesvnic->lro_mgr.stats.flushed;
target_stat_values[++index] = nesvnic->lro_mgr.stats.no_desc;
+ target_stat_values[++index] = atomic_read(&pau_qps_created);
+ target_stat_values[++index] = atomic_read(&pau_qps_destroyed);
}
/**
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index f9c417c..cd10968 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -51,13 +51,34 @@
#include "nes.h"
-
-
static u16 nes_read16_eeprom(void __iomem *addr, u16 offset);
u32 mh_detected;
u32 mh_pauses_sent;
+u32 nes_set_pau(struct nes_device *nesdev)
+{
+ u32 ret = 0;
+ u32 counter;
+
+ nes_write_indexed(nesdev, NES_IDX_GPR2, NES_ENABLE_PAU);
+ nes_write_indexed(nesdev, NES_IDX_GPR_TRIGGER, 1);
+
+ for (counter = 0; counter < NES_PAU_COUNTER; counter++) {
+ udelay(30);
+ if (!nes_read_indexed(nesdev, NES_IDX_GPR2)) {
+ printk(KERN_INFO PFX "PAU is supported.\n");
+ break;
+ }
+ nes_write_indexed(nesdev, NES_IDX_GPR_TRIGGER, 1);
+ }
+ if (counter == NES_PAU_COUNTER) {
+ printk(KERN_INFO PFX "PAU is not supported.\n");
+ return -EPERM;
+ }
+ return ret;
+}
+
/**
* nes_read_eeprom_values -
*/
@@ -187,6 +208,11 @@
if (((major_ver == 3) && (minor_ver >= 16)) || (major_ver > 3))
nesadapter->send_term_ok = 1;
+ if (nes_drv_opt & NES_DRV_OPT_ENABLE_PAU) {
+ if (!nes_set_pau(nesdev))
+ nesadapter->allow_unaligned_fpdus = 1;
+ }
+
nesadapter->firmware_version = (((u32)(u8)(eeprom_data>>8)) << 16) +
(u32)((u8)eeprom_data);
@@ -594,6 +620,7 @@
nes_free_cqp_request(nesdev, cqp_request);
}
+
/**
* nes_post_cqp_request
*/
@@ -604,6 +631,8 @@
unsigned long flags;
u32 cqp_head;
u64 u64temp;
+ u32 opcode;
+ int ctx_index = NES_CQP_WQE_COMP_CTX_LOW_IDX;
spin_lock_irqsave(&nesdev->cqp.lock, flags);
@@ -614,17 +643,20 @@
nesdev->cqp.sq_head &= nesdev->cqp.sq_size-1;
cqp_wqe = &nesdev->cqp.sq_vbase[cqp_head];
memcpy(cqp_wqe, &cqp_request->cqp_wqe, sizeof(*cqp_wqe));
+ opcode = le32_to_cpu(cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX]);
+ if ((opcode & NES_CQP_OPCODE_MASK) == NES_CQP_DOWNLOAD_SEGMENT)
+ ctx_index = NES_CQP_WQE_DL_COMP_CTX_LOW_IDX;
barrier();
u64temp = (unsigned long)cqp_request;
- set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_COMP_SCRATCH_LOW_IDX,
- u64temp);
+ set_wqe_64bit_value(cqp_wqe->wqe_words, ctx_index, u64temp);
nes_debug(NES_DBG_CQP, "CQP request (opcode 0x%02X), line 1 = 0x%08X put on CQPs SQ,"
- " request = %p, cqp_head = %u, cqp_tail = %u, cqp_size = %u,"
- " waiting = %d, refcount = %d.\n",
- le32_to_cpu(cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX])&0x3f,
- le32_to_cpu(cqp_wqe->wqe_words[NES_CQP_WQE_ID_IDX]), cqp_request,
- nesdev->cqp.sq_head, nesdev->cqp.sq_tail, nesdev->cqp.sq_size,
- cqp_request->waiting, atomic_read(&cqp_request->refcount));
+ " request = %p, cqp_head = %u, cqp_tail = %u, cqp_size = %u,"
+ " waiting = %d, refcount = %d.\n",
+ opcode & NES_CQP_OPCODE_MASK,
+ le32_to_cpu(cqp_wqe->wqe_words[NES_CQP_WQE_ID_IDX]), cqp_request,
+ nesdev->cqp.sq_head, nesdev->cqp.sq_tail, nesdev->cqp.sq_size,
+ cqp_request->waiting, atomic_read(&cqp_request->refcount));
+
barrier();
/* Ring doorbell (1 WQEs) */
@@ -645,7 +677,6 @@
return;
}
-
/**
* nes_arp_table
*/
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 9f2f7d4b..5095bc4 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1458,7 +1458,7 @@
struct ib_qp_attr attr;
struct iw_cm_id *cm_id;
struct iw_cm_event cm_event;
- int ret;
+ int ret = 0;
atomic_inc(&sw_qps_destroyed);
nesqp->destroyed = 1;
@@ -1511,7 +1511,6 @@
if ((nesqp->nesrcq) && (nesqp->nesrcq != nesqp->nesscq))
nes_clean_cq(nesqp, nesqp->nesrcq);
}
-
nes_rem_ref(&nesqp->ibqp);
return 0;
}
@@ -2338,8 +2337,10 @@
skip_pages = ((u32)region->offset) >> 12;
- if (ib_copy_from_udata(&req, udata, sizeof(req)))
+ if (ib_copy_from_udata(&req, udata, sizeof(req))) {
+ ib_umem_release(region);
return ERR_PTR(-EFAULT);
+ }
nes_debug(NES_DBG_MR, "Memory Registration type = %08X.\n", req.reg_type);
switch (req.reg_type) {
@@ -2631,6 +2632,7 @@
return &nesmr->ibmr;
}
+ ib_umem_release(region);
return ERR_PTR(-ENOSYS);
}
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index 2df9993e..fe6b6e9 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -139,7 +139,8 @@
struct nes_cq *nesrcq;
struct nes_pd *nespd;
void *cm_node; /* handle of the node this QP is associated with */
- struct ietf_mpa_frame *ietf_frame;
+ void *ietf_frame;
+ u8 ietf_frame_size;
dma_addr_t ietf_frame_pbase;
struct ib_mr *lsmm_mr;
struct nes_hw_qp hwqp;
@@ -154,6 +155,7 @@
u32 mmap_sq_db_index;
u32 mmap_rq_db_index;
spinlock_t lock;
+ spinlock_t pau_lock;
struct nes_qp_context *nesqp_context;
dma_addr_t nesqp_context_pbase;
void *pbl_vbase;
@@ -161,6 +163,8 @@
struct page *page;
struct timer_list terminate_timer;
enum ib_event_type terminate_eventtype;
+ struct sk_buff_head pau_list;
+ u32 pau_rcv_nxt;
u16 active_conn:1;
u16 skip_lsmm:1;
u16 user_mode:1;
@@ -168,7 +172,8 @@
u16 flush_issued:1;
u16 destroyed:1;
u16 sig_all:1;
- u16 rsvd:9;
+ u16 pau_mode:1;
+ u16 rsvd:8;
u16 private_data_len;
u16 term_sq_flush_code;
u16 term_rq_flush_code;
@@ -176,5 +181,8 @@
u8 hw_tcp_state;
u8 term_flags;
u8 sq_kmapped;
+ u8 pau_busy;
+ u8 pau_pending;
+ u8 pau_state;
};
#endif /* NES_VERBS_H */
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c9624ea..b881bdc 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -171,7 +171,9 @@
/* how many alloc_pages() chunks in rcvegrbuf_pages */
u32 rcvegrbuf_chunks;
/* how many egrbufs per chunk */
- u32 rcvegrbufs_perchunk;
+ u16 rcvegrbufs_perchunk;
+ /* ilog2 of above */
+ u16 rcvegrbufs_perchunk_shift;
/* order for rcvegrbuf_pages */
size_t rcvegrbuf_size;
/* rcvhdrq size (for freeing) */
@@ -221,6 +223,9 @@
/* ctxt rcvhdrq head offset */
u32 head;
u32 pkt_count;
+ /* lookaside fields */
+ struct qib_qp *lookaside_qp;
+ u32 lookaside_qpn;
/* QPs waiting for context processing */
struct list_head qp_wait_list;
};
@@ -807,6 +812,10 @@
* supports, less gives more pio bufs/ctxt, etc.
*/
u32 cfgctxts;
+ /*
+ * number of ctxts available for PSM open
+ */
+ u32 freectxts;
/*
* hint that we should update pioavailshadow before
@@ -936,7 +945,9 @@
/* chip address space used by 4k pio buffers */
u32 align4k;
/* size of each rcvegrbuffer */
- u32 rcvegrbufsize;
+ u16 rcvegrbufsize;
+ /* log2 of above */
+ u16 rcvegrbufsize_shift;
/* localbus width (1, 2,4,8,16,32) from config space */
u32 lbus_width;
/* localbus speed in MHz */
diff --git a/drivers/infiniband/hw/qib/qib_driver.c b/drivers/infiniband/hw/qib/qib_driver.c
index 23e584f..9a9047f 100644
--- a/drivers/infiniband/hw/qib/qib_driver.c
+++ b/drivers/infiniband/hw/qib/qib_driver.c
@@ -279,10 +279,10 @@
*/
static inline void *qib_get_egrbuf(const struct qib_ctxtdata *rcd, u32 etail)
{
- const u32 chunk = etail / rcd->rcvegrbufs_perchunk;
- const u32 idx = etail % rcd->rcvegrbufs_perchunk;
+ const u32 chunk = etail >> rcd->rcvegrbufs_perchunk_shift;
+ const u32 idx = etail & ((u32)rcd->rcvegrbufs_perchunk - 1);
- return rcd->rcvegrbuf[chunk] + idx * rcd->dd->rcvegrbufsize;
+ return rcd->rcvegrbuf[chunk] + (idx << rcd->dd->rcvegrbufsize_shift);
}
/*
@@ -310,7 +310,6 @@
u32 opcode;
u32 psn;
int diff;
- unsigned long flags;
/* Sanity check packet */
if (tlen < 24)
@@ -365,7 +364,6 @@
switch (qp->ibqp.qp_type) {
case IB_QPT_RC:
- spin_lock_irqsave(&qp->s_lock, flags);
ruc_res =
qib_ruc_check_hdr(
ibp, hdr,
@@ -373,11 +371,8 @@
qp,
be32_to_cpu(ohdr->bth[0]));
if (ruc_res) {
- spin_unlock_irqrestore(&qp->s_lock,
- flags);
goto unlock;
}
- spin_unlock_irqrestore(&qp->s_lock, flags);
/* Only deal with RDMA Writes for now */
if (opcode <
@@ -547,6 +542,15 @@
updegr = 0;
}
}
+ /*
+ * Notify qib_destroy_qp() if it is waiting
+ * for lookaside_qp to finish.
+ */
+ if (rcd->lookaside_qp) {
+ if (atomic_dec_and_test(&rcd->lookaside_qp->refcount))
+ wake_up(&rcd->lookaside_qp->wait);
+ rcd->lookaside_qp = NULL;
+ }
rcd->head = l;
rcd->pkt_count += i;
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 2625303..7763366 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1284,6 +1284,7 @@
strlcpy(rcd->comm, current->comm, sizeof(rcd->comm));
ctxt_fp(fp) = rcd;
qib_stats.sps_ctxts++;
+ dd->freectxts++;
ret = 0;
goto bail;
@@ -1792,6 +1793,7 @@
if (dd->pageshadow)
unlock_expected_tids(rcd);
qib_stats.sps_ctxts--;
+ dd->freectxts--;
}
mutex_unlock(&qib_mutex);
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index d8ca0a0..781a802 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -3273,6 +3273,8 @@
/* we always allocate at least 2048 bytes for eager buffers */
ret = ib_mtu_enum_to_int(qib_ibmtu);
dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU;
+ BUG_ON(!is_power_of_2(dd->rcvegrbufsize));
+ dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
qib_6120_tidtemplate(dd);
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index e1f9474..3f1d562 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -4085,6 +4085,8 @@
/* we always allocate at least 2048 bytes for eager buffers */
ret = ib_mtu_enum_to_int(qib_ibmtu);
dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU;
+ BUG_ON(!is_power_of_2(dd->rcvegrbufsize));
+ dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
qib_7220_tidtemplate(dd);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 5ea9ece..efd0a11 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -2310,12 +2310,15 @@
val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+ ppd->cpspec->ibcctrl_a = val;
/*
* Reset the PCS interface to the serdes (and also ibc, which is still
* in reset from above). Writes new value of ibcctrl_a as last step.
*/
qib_7322_mini_pcs_reset(ppd);
qib_write_kreg(dd, kr_scratch, 0ULL);
+ /* clear the linkinit cmds */
+ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkInitCmd);
if (!ppd->cpspec->ibcctrl_b) {
unsigned lse = ppd->link_speed_enabled;
@@ -2387,11 +2390,6 @@
qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
- /* Hold the link state machine for mezz boards */
- if (IS_QMH(dd) || IS_QME(dd))
- qib_set_ib_7322_lstate(ppd, 0,
- QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
-
/* Also enable IBSTATUSCHG interrupt. */
val = qib_read_kreg_port(ppd, krp_errmask);
qib_write_kreg_port(ppd, krp_errmask,
@@ -2853,9 +2851,8 @@
for (i = 0; i < dd->first_user_ctxt; i++) {
if (ctxtrbits & rmask) {
ctxtrbits &= ~rmask;
- if (dd->rcd[i]) {
+ if (dd->rcd[i])
qib_kreceive(dd->rcd[i], NULL, &npkts);
- }
}
rmask <<= 1;
}
@@ -5230,6 +5227,8 @@
QIBL_IB_AUTONEG_INPROG)))
set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ struct qib_qsfp_data *qd =
+ &ppd->cpspec->qsfp_data;
/* unlock the Tx settings, speed may change */
qib_write_kreg_port(ppd, krp_tx_deemph_override,
SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
@@ -5237,6 +5236,12 @@
qib_cancel_sends(ppd);
/* on link down, ensure sane pcs state */
qib_7322_mini_pcs_reset(ppd);
+ /* schedule the qsfp refresh which should turn the link
+ off */
+ if (ppd->dd->flags & QIB_HAS_QSFP) {
+ qd->t_insert = get_jiffies_64();
+ schedule_work(&qd->work);
+ }
spin_lock_irqsave(&ppd->sdma_lock, flags);
if (__qib_sdma_running(ppd))
__qib_sdma_process_event(ppd,
@@ -5587,43 +5592,79 @@
struct qib_qsfp_data *qd;
struct qib_pportdata *ppd;
u64 pwrup;
+ unsigned long flags;
int ret;
u32 le2;
qd = container_of(work, struct qib_qsfp_data, work);
ppd = qd->ppd;
- pwrup = qd->t_insert + msecs_to_jiffies(QSFP_PWR_LAG_MSEC);
+ pwrup = qd->t_insert +
+ msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC);
- /*
- * Some QSFP's not only do not respond until the full power-up
- * time, but may behave badly if we try. So hold off responding
- * to insertion.
- */
- while (1) {
- u64 now = get_jiffies_64();
- if (time_after64(now, pwrup))
- break;
- msleep(20);
- }
- ret = qib_refresh_qsfp_cache(ppd, &qd->cache);
- /*
- * Need to change LE2 back to defaults if we couldn't
- * read the cable type (to handle cable swaps), so do this
- * even on failure to read cable information. We don't
- * get here for QME, so IS_QME check not needed here.
- */
- if (!ret && !ppd->dd->cspec->r1) {
- if (QSFP_IS_ACTIVE_FAR(qd->cache.tech))
- le2 = LE2_QME;
- else if (qd->cache.atten[1] >= qib_long_atten &&
- QSFP_IS_CU(qd->cache.tech))
- le2 = LE2_5m;
- else
+ /* Delay for 20 msecs to allow ModPrs resistor to setup */
+ mdelay(QSFP_MODPRS_LAG_MSEC);
+
+ if (!qib_qsfp_mod_present(ppd)) {
+ ppd->cpspec->qsfp_data.modpresent = 0;
+ /* Set the physical link to disabled */
+ qib_set_ib_7322_lstate(ppd, 0,
+ QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_LINKV;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ } else {
+ /*
+ * Some QSFP's not only do not respond until the full power-up
+ * time, but may behave badly if we try. So hold off responding
+ * to insertion.
+ */
+ while (1) {
+ u64 now = get_jiffies_64();
+ if (time_after64(now, pwrup))
+ break;
+ msleep(20);
+ }
+
+ ret = qib_refresh_qsfp_cache(ppd, &qd->cache);
+
+ /*
+ * Need to change LE2 back to defaults if we couldn't
+ * read the cable type (to handle cable swaps), so do this
+ * even on failure to read cable information. We don't
+ * get here for QME, so IS_QME check not needed here.
+ */
+ if (!ret && !ppd->dd->cspec->r1) {
+ if (QSFP_IS_ACTIVE_FAR(qd->cache.tech))
+ le2 = LE2_QME;
+ else if (qd->cache.atten[1] >= qib_long_atten &&
+ QSFP_IS_CU(qd->cache.tech))
+ le2 = LE2_5m;
+ else
+ le2 = LE2_DEFAULT;
+ } else
le2 = LE2_DEFAULT;
- } else
- le2 = LE2_DEFAULT;
- ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7));
- init_txdds_table(ppd, 0);
+ ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7));
+ /*
+ * We always change parameteters, since we can choose
+ * values for cables without eeproms, and the cable may have
+ * changed from a cable with full or partial eeprom content
+ * to one with partial or no content.
+ */
+ init_txdds_table(ppd, 0);
+ /* The physical link is being re-enabled only when the
+ * previous state was DISABLED and the VALID bit is not
+ * set. This should only happen when the cable has been
+ * physically pulled. */
+ if (!ppd->cpspec->qsfp_data.modpresent &&
+ (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) {
+ ppd->cpspec->qsfp_data.modpresent = 1;
+ qib_set_ib_7322_lstate(ppd, 0,
+ QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_LINKV;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ }
+ }
}
/*
@@ -5727,7 +5768,8 @@
/* now change the IBC and serdes, overriding generic */
init_txdds_table(ppd, 1);
/* Re-enable the physical state machine on mezz boards
- * now that the correct settings have been set. */
+ * now that the correct settings have been set.
+ * QSFP boards are handles by the QSFP event handler */
if (IS_QMH(dd) || IS_QME(dd))
qib_set_ib_7322_lstate(ppd, 0,
QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
@@ -6205,6 +6247,8 @@
/* we always allocate at least 2048 bytes for eager buffers */
dd->rcvegrbufsize = max(mtu, 2048);
+ BUG_ON(!is_power_of_2(dd->rcvegrbufsize));
+ dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
qib_7322_tidtemplate(dd);
@@ -7147,7 +7191,8 @@
}
}
- /* Lookup serdes setting by cable type and attenuation */
+ /* Active cables don't have attenuation so we only set SERDES
+ * settings to account for the attenuation of the board traces. */
if (!override && QSFP_IS_ACTIVE(qd->tech)) {
*sdr_dds = txdds_sdr + ppd->dd->board_atten;
*ddr_dds = txdds_ddr + ppd->dd->board_atten;
@@ -7464,12 +7509,6 @@
u32 le_val, rxcaldone;
int chan, chan_done = (1 << SERDES_CHANS) - 1;
- /*
- * Initialize the Tx DDS tables. Also done every QSFP event,
- * for adapters with QSFP
- */
- init_txdds_table(ppd, 0);
-
/* Clear cmode-override, may be set from older driver */
ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14);
@@ -7655,6 +7694,12 @@
/* VGA output common mode */
ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2));
+ /*
+ * Initialize the Tx DDS tables. Also done every QSFP event,
+ * for adapters with QSFP
+ */
+ init_txdds_table(ppd, 0);
+
return 0;
}
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index a01f3fc..b093a0b 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -183,6 +183,9 @@
rcd->rcvegrbuf_chunks = (rcd->rcvegrcnt +
rcd->rcvegrbufs_perchunk - 1) /
rcd->rcvegrbufs_perchunk;
+ BUG_ON(!is_power_of_2(rcd->rcvegrbufs_perchunk));
+ rcd->rcvegrbufs_perchunk_shift =
+ ilog2(rcd->rcvegrbufs_perchunk);
}
return rcd;
}
@@ -398,6 +401,7 @@
if (rcd)
dd->f_rcvctrl(rcd->ppd, rcvmask, i);
}
+ dd->freectxts = dd->cfgctxts - dd->first_user_ctxt;
}
static void verify_interrupt(unsigned long opaque)
@@ -581,10 +585,6 @@
continue;
}
- /* let link come up, and enable IBC */
- spin_lock_irqsave(&ppd->lflags_lock, flags);
- ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
- spin_unlock_irqrestore(&ppd->lflags_lock, flags);
portok++;
}
diff --git a/drivers/infiniband/hw/qib/qib_qp.c b/drivers/infiniband/hw/qib/qib_qp.c
index e16751f..7e7e16f 100644
--- a/drivers/infiniband/hw/qib/qib_qp.c
+++ b/drivers/infiniband/hw/qib/qib_qp.c
@@ -34,6 +34,7 @@
#include <linux/err.h>
#include <linux/vmalloc.h>
+#include <linux/jhash.h>
#include "qib.h"
@@ -204,6 +205,13 @@
clear_bit(qpn & BITS_PER_PAGE_MASK, map->page);
}
+static inline unsigned qpn_hash(struct qib_ibdev *dev, u32 qpn)
+{
+ return jhash_1word(qpn, dev->qp_rnd) &
+ (dev->qp_table_size - 1);
+}
+
+
/*
* Put the QP into the hash table.
* The hash table holds a reference to the QP.
@@ -211,22 +219,23 @@
static void insert_qp(struct qib_ibdev *dev, struct qib_qp *qp)
{
struct qib_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num);
- unsigned n = qp->ibqp.qp_num % dev->qp_table_size;
unsigned long flags;
+ unsigned n = qpn_hash(dev, qp->ibqp.qp_num);
spin_lock_irqsave(&dev->qpt_lock, flags);
-
- if (qp->ibqp.qp_num == 0)
- ibp->qp0 = qp;
- else if (qp->ibqp.qp_num == 1)
- ibp->qp1 = qp;
- else {
- qp->next = dev->qp_table[n];
- dev->qp_table[n] = qp;
- }
atomic_inc(&qp->refcount);
+ if (qp->ibqp.qp_num == 0)
+ rcu_assign_pointer(ibp->qp0, qp);
+ else if (qp->ibqp.qp_num == 1)
+ rcu_assign_pointer(ibp->qp1, qp);
+ else {
+ qp->next = dev->qp_table[n];
+ rcu_assign_pointer(dev->qp_table[n], qp);
+ }
+
spin_unlock_irqrestore(&dev->qpt_lock, flags);
+ synchronize_rcu();
}
/*
@@ -236,29 +245,32 @@
static void remove_qp(struct qib_ibdev *dev, struct qib_qp *qp)
{
struct qib_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num);
- struct qib_qp *q, **qpp;
+ unsigned n = qpn_hash(dev, qp->ibqp.qp_num);
unsigned long flags;
- qpp = &dev->qp_table[qp->ibqp.qp_num % dev->qp_table_size];
-
spin_lock_irqsave(&dev->qpt_lock, flags);
if (ibp->qp0 == qp) {
- ibp->qp0 = NULL;
atomic_dec(&qp->refcount);
+ rcu_assign_pointer(ibp->qp0, NULL);
} else if (ibp->qp1 == qp) {
- ibp->qp1 = NULL;
atomic_dec(&qp->refcount);
- } else
+ rcu_assign_pointer(ibp->qp1, NULL);
+ } else {
+ struct qib_qp *q, **qpp;
+
+ qpp = &dev->qp_table[n];
for (; (q = *qpp) != NULL; qpp = &q->next)
if (q == qp) {
- *qpp = qp->next;
- qp->next = NULL;
atomic_dec(&qp->refcount);
+ rcu_assign_pointer(*qpp, qp->next);
+ qp->next = NULL;
break;
}
+ }
spin_unlock_irqrestore(&dev->qpt_lock, flags);
+ synchronize_rcu();
}
/**
@@ -280,21 +292,24 @@
if (!qib_mcast_tree_empty(ibp))
qp_inuse++;
- if (ibp->qp0)
+ rcu_read_lock();
+ if (rcu_dereference(ibp->qp0))
qp_inuse++;
- if (ibp->qp1)
+ if (rcu_dereference(ibp->qp1))
qp_inuse++;
+ rcu_read_unlock();
}
spin_lock_irqsave(&dev->qpt_lock, flags);
for (n = 0; n < dev->qp_table_size; n++) {
qp = dev->qp_table[n];
- dev->qp_table[n] = NULL;
+ rcu_assign_pointer(dev->qp_table[n], NULL);
for (; qp; qp = qp->next)
qp_inuse++;
}
spin_unlock_irqrestore(&dev->qpt_lock, flags);
+ synchronize_rcu();
return qp_inuse;
}
@@ -309,25 +324,28 @@
*/
struct qib_qp *qib_lookup_qpn(struct qib_ibport *ibp, u32 qpn)
{
- struct qib_ibdev *dev = &ppd_from_ibp(ibp)->dd->verbs_dev;
- unsigned long flags;
- struct qib_qp *qp;
+ struct qib_qp *qp = NULL;
- spin_lock_irqsave(&dev->qpt_lock, flags);
+ if (unlikely(qpn <= 1)) {
+ rcu_read_lock();
+ if (qpn == 0)
+ qp = rcu_dereference(ibp->qp0);
+ else
+ qp = rcu_dereference(ibp->qp1);
+ } else {
+ struct qib_ibdev *dev = &ppd_from_ibp(ibp)->dd->verbs_dev;
+ unsigned n = qpn_hash(dev, qpn);
- if (qpn == 0)
- qp = ibp->qp0;
- else if (qpn == 1)
- qp = ibp->qp1;
- else
- for (qp = dev->qp_table[qpn % dev->qp_table_size]; qp;
- qp = qp->next)
+ rcu_read_lock();
+ for (qp = dev->qp_table[n]; rcu_dereference(qp); qp = qp->next)
if (qp->ibqp.qp_num == qpn)
break;
+ }
if (qp)
- atomic_inc(&qp->refcount);
+ if (unlikely(!atomic_inc_not_zero(&qp->refcount)))
+ qp = NULL;
- spin_unlock_irqrestore(&dev->qpt_lock, flags);
+ rcu_read_unlock();
return qp;
}
@@ -765,8 +783,10 @@
}
}
- if (attr_mask & IB_QP_PATH_MTU)
+ if (attr_mask & IB_QP_PATH_MTU) {
qp->path_mtu = pmtu;
+ qp->pmtu = ib_mtu_enum_to_int(pmtu);
+ }
if (attr_mask & IB_QP_RETRY_CNT) {
qp->s_retry_cnt = attr->retry_cnt;
@@ -781,8 +801,12 @@
if (attr_mask & IB_QP_MIN_RNR_TIMER)
qp->r_min_rnr_timer = attr->min_rnr_timer;
- if (attr_mask & IB_QP_TIMEOUT)
+ if (attr_mask & IB_QP_TIMEOUT) {
qp->timeout = attr->timeout;
+ qp->timeout_jiffies =
+ usecs_to_jiffies((4096UL * (1UL << qp->timeout)) /
+ 1000UL);
+ }
if (attr_mask & IB_QP_QKEY)
qp->qkey = attr->qkey;
@@ -1013,6 +1037,10 @@
ret = ERR_PTR(-ENOMEM);
goto bail_swq;
}
+ RCU_INIT_POINTER(qp->next, NULL);
+ qp->timeout_jiffies =
+ usecs_to_jiffies((4096UL * (1UL << qp->timeout)) /
+ 1000UL);
if (init_attr->srq)
sz = 0;
else {
diff --git a/drivers/infiniband/hw/qib/qib_qsfp.c b/drivers/infiniband/hw/qib/qib_qsfp.c
index 3374a52..e06c4ed 100644
--- a/drivers/infiniband/hw/qib/qib_qsfp.c
+++ b/drivers/infiniband/hw/qib/qib_qsfp.c
@@ -273,18 +273,12 @@
int ret;
int idx;
u16 cks;
- u32 mask;
u8 peek[4];
/* ensure sane contents on invalid reads, for cable swaps */
memset(cp, 0, sizeof(*cp));
- mask = QSFP_GPIO_MOD_PRS_N;
- if (ppd->hw_pidx)
- mask <<= QSFP_GPIO_PORT2_SHIFT;
-
- ret = ppd->dd->f_gpio_mod(ppd->dd, 0, 0, 0);
- if (ret & mask) {
+ if (!qib_qsfp_mod_present(ppd)) {
ret = -ENODEV;
goto bail;
}
@@ -444,6 +438,19 @@
static const char *pwr_codes = "1.5W2.0W2.5W3.5W";
+int qib_qsfp_mod_present(struct qib_pportdata *ppd)
+{
+ u32 mask;
+ int ret;
+
+ mask = QSFP_GPIO_MOD_PRS_N <<
+ (ppd->hw_pidx * QSFP_GPIO_PORT2_SHIFT);
+ ret = ppd->dd->f_gpio_mod(ppd->dd, 0, 0, 0);
+
+ return !((ret & mask) >>
+ ((ppd->hw_pidx * QSFP_GPIO_PORT2_SHIFT) + 3));
+}
+
/*
* Initialize structures that control access to QSFP. Called once per port
* on cards that support QSFP.
@@ -452,7 +459,6 @@
void (*fevent)(struct work_struct *))
{
u32 mask, highs;
- int pins;
struct qib_devdata *dd = qd->ppd->dd;
@@ -480,8 +486,7 @@
mask <<= QSFP_GPIO_PORT2_SHIFT;
/* Do not try to wait here. Better to let event handle it */
- pins = dd->f_gpio_mod(dd, 0, 0, 0);
- if (pins & mask)
+ if (!qib_qsfp_mod_present(qd->ppd))
goto bail;
/* We see a module, but it may be unwise to look yet. Just schedule */
qd->t_insert = get_jiffies_64();
diff --git a/drivers/infiniband/hw/qib/qib_qsfp.h b/drivers/infiniband/hw/qib/qib_qsfp.h
index c109bbd..46002a9 100644
--- a/drivers/infiniband/hw/qib/qib_qsfp.h
+++ b/drivers/infiniband/hw/qib/qib_qsfp.h
@@ -34,6 +34,7 @@
#define QSFP_DEV 0xA0
#define QSFP_PWR_LAG_MSEC 2000
+#define QSFP_MODPRS_LAG_MSEC 20
/*
* Below are masks for various QSFP signals, for Port 1.
@@ -177,10 +178,12 @@
struct work_struct work;
struct qib_qsfp_cache cache;
u64 t_insert;
+ u8 modpresent;
};
extern int qib_refresh_qsfp_cache(struct qib_pportdata *ppd,
struct qib_qsfp_cache *cp);
+extern int qib_qsfp_mod_present(struct qib_pportdata *ppd);
extern void qib_qsfp_init(struct qib_qsfp_data *qd,
void (*fevent)(struct work_struct *));
extern void qib_qsfp_deinit(struct qib_qsfp_data *qd);
diff --git a/drivers/infiniband/hw/qib/qib_rc.c b/drivers/infiniband/hw/qib/qib_rc.c
index eca0c41..afaf4ac 100644
--- a/drivers/infiniband/hw/qib/qib_rc.c
+++ b/drivers/infiniband/hw/qib/qib_rc.c
@@ -59,8 +59,7 @@
qp->s_flags |= QIB_S_TIMER;
qp->s_timer.function = rc_timeout;
/* 4.096 usec. * (1 << qp->timeout) */
- qp->s_timer.expires = jiffies +
- usecs_to_jiffies((4096UL * (1UL << qp->timeout)) / 1000UL);
+ qp->s_timer.expires = jiffies + qp->timeout_jiffies;
add_timer(&qp->s_timer);
}
@@ -239,7 +238,7 @@
u32 len;
u32 bth0;
u32 bth2;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ u32 pmtu = qp->pmtu;
char newreq;
unsigned long flags;
int ret = 0;
@@ -1519,9 +1518,7 @@
* 4.096 usec. * (1 << qp->timeout)
*/
qp->s_flags |= QIB_S_TIMER;
- mod_timer(&qp->s_timer, jiffies +
- usecs_to_jiffies((4096UL * (1UL << qp->timeout)) /
- 1000UL));
+ mod_timer(&qp->s_timer, jiffies + qp->timeout_jiffies);
if (qp->s_flags & QIB_S_WAIT_ACK) {
qp->s_flags &= ~QIB_S_WAIT_ACK;
qib_schedule_send(qp);
@@ -1732,7 +1729,7 @@
* same request.
*/
offset = ((psn - e->psn) & QIB_PSN_MASK) *
- ib_mtu_enum_to_int(qp->path_mtu);
+ qp->pmtu;
len = be32_to_cpu(reth->length);
if (unlikely(offset + len != e->rdma_sge.sge_length))
goto unlock_done;
@@ -1876,7 +1873,7 @@
u32 psn;
u32 pad;
struct ib_wc wc;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ u32 pmtu = qp->pmtu;
int diff;
struct ib_reth *reth;
unsigned long flags;
@@ -1892,10 +1889,8 @@
}
opcode = be32_to_cpu(ohdr->bth[0]);
- spin_lock_irqsave(&qp->s_lock, flags);
if (qib_ruc_check_hdr(ibp, hdr, has_grh, qp, opcode))
- goto sunlock;
- spin_unlock_irqrestore(&qp->s_lock, flags);
+ return;
psn = be32_to_cpu(ohdr->bth[2]);
opcode >>= 24;
@@ -1955,8 +1950,6 @@
break;
}
- memset(&wc, 0, sizeof wc);
-
if (qp->state == IB_QPS_RTR && !(qp->r_flags & QIB_R_COMM_EST)) {
qp->r_flags |= QIB_R_COMM_EST;
if (qp->ibqp.event_handler) {
@@ -2009,16 +2002,19 @@
goto rnr_nak;
qp->r_rcv_len = 0;
if (opcode == OP(SEND_ONLY))
- goto send_last;
- /* FALLTHROUGH */
+ goto no_immediate_data;
+ /* FALLTHROUGH for SEND_ONLY_WITH_IMMEDIATE */
case OP(SEND_LAST_WITH_IMMEDIATE):
send_last_imm:
wc.ex.imm_data = ohdr->u.imm_data;
hdrsize += 4;
wc.wc_flags = IB_WC_WITH_IMM;
- /* FALLTHROUGH */
+ goto send_last;
case OP(SEND_LAST):
case OP(RDMA_WRITE_LAST):
+no_immediate_data:
+ wc.wc_flags = 0;
+ wc.ex.imm_data = 0;
send_last:
/* Get the number of bytes the message was padded by. */
pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
@@ -2051,6 +2047,12 @@
wc.src_qp = qp->remote_qpn;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
+ /* zero fields that are N/A */
+ wc.vendor_err = 0;
+ wc.pkey_index = 0;
+ wc.dlid_path_bits = 0;
+ wc.port_num = 0;
+ wc.csum_ok = 0;
/* Signal completion event if the solicited bit is set. */
qib_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
(ohdr->bth[0] &
@@ -2089,7 +2091,7 @@
if (opcode == OP(RDMA_WRITE_FIRST))
goto send_middle;
else if (opcode == OP(RDMA_WRITE_ONLY))
- goto send_last;
+ goto no_immediate_data;
ret = qib_get_rwqe(qp, 1);
if (ret < 0)
goto nack_op_err;
diff --git a/drivers/infiniband/hw/qib/qib_ruc.c b/drivers/infiniband/hw/qib/qib_ruc.c
index eb78d93..b4b37e4 100644
--- a/drivers/infiniband/hw/qib/qib_ruc.c
+++ b/drivers/infiniband/hw/qib/qib_ruc.c
@@ -260,12 +260,15 @@
/*
*
- * This should be called with the QP s_lock held.
+ * This should be called with the QP r_lock held.
+ *
+ * The s_lock will be acquired around the qib_migrate_qp() call.
*/
int qib_ruc_check_hdr(struct qib_ibport *ibp, struct qib_ib_header *hdr,
int has_grh, struct qib_qp *qp, u32 bth0)
{
__be64 guid;
+ unsigned long flags;
if (qp->s_mig_state == IB_MIG_ARMED && (bth0 & IB_BTH_MIG_REQ)) {
if (!has_grh) {
@@ -295,7 +298,9 @@
if (be16_to_cpu(hdr->lrh[3]) != qp->alt_ah_attr.dlid ||
ppd_from_ibp(ibp)->port != qp->alt_ah_attr.port_num)
goto err;
+ spin_lock_irqsave(&qp->s_lock, flags);
qib_migrate_qp(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
} else {
if (!has_grh) {
if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
diff --git a/drivers/infiniband/hw/qib/qib_srq.c b/drivers/infiniband/hw/qib/qib_srq.c
index c3ec8ef..d623593 100644
--- a/drivers/infiniband/hw/qib/qib_srq.c
+++ b/drivers/infiniband/hw/qib/qib_srq.c
@@ -107,6 +107,11 @@
u32 sz;
struct ib_srq *ret;
+ if (srq_init_attr->srq_type != IB_SRQT_BASIC) {
+ ret = ERR_PTR(-ENOSYS);
+ goto done;
+ }
+
if (srq_init_attr->attr.max_sge == 0 ||
srq_init_attr->attr.max_sge > ib_qib_max_srq_sges ||
srq_init_attr->attr.max_wr == 0 ||
diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c
index 14d129d..78fbd56 100644
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -515,8 +515,7 @@
struct qib_devdata *dd = dd_from_dev(dev);
/* Return the number of free user ports (contexts) available. */
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->cfgctxts -
- dd->first_user_ctxt - (u32)qib_stats.sps_ctxts);
+ return scnprintf(buf, PAGE_SIZE, "%u\n", dd->freectxts);
}
static ssize_t show_serial(struct device *device,
diff --git a/drivers/infiniband/hw/qib/qib_uc.c b/drivers/infiniband/hw/qib/qib_uc.c
index 32ccf3c..847e7af 100644
--- a/drivers/infiniband/hw/qib/qib_uc.c
+++ b/drivers/infiniband/hw/qib/qib_uc.c
@@ -51,7 +51,7 @@
u32 hwords;
u32 bth0;
u32 len;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ u32 pmtu = qp->pmtu;
int ret = 0;
spin_lock_irqsave(&qp->s_lock, flags);
@@ -243,13 +243,12 @@
int has_grh, void *data, u32 tlen, struct qib_qp *qp)
{
struct qib_other_headers *ohdr;
- unsigned long flags;
u32 opcode;
u32 hdrsize;
u32 psn;
u32 pad;
struct ib_wc wc;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ u32 pmtu = qp->pmtu;
struct ib_reth *reth;
int ret;
@@ -263,14 +262,11 @@
}
opcode = be32_to_cpu(ohdr->bth[0]);
- spin_lock_irqsave(&qp->s_lock, flags);
if (qib_ruc_check_hdr(ibp, hdr, has_grh, qp, opcode))
- goto sunlock;
- spin_unlock_irqrestore(&qp->s_lock, flags);
+ return;
psn = be32_to_cpu(ohdr->bth[2]);
opcode >>= 24;
- memset(&wc, 0, sizeof wc);
/* Compare the PSN verses the expected PSN. */
if (unlikely(qib_cmp24(psn, qp->r_psn) != 0)) {
@@ -370,7 +366,7 @@
}
qp->r_rcv_len = 0;
if (opcode == OP(SEND_ONLY))
- goto send_last;
+ goto no_immediate_data;
else if (opcode == OP(SEND_ONLY_WITH_IMMEDIATE))
goto send_last_imm;
/* FALLTHROUGH */
@@ -389,8 +385,11 @@
wc.ex.imm_data = ohdr->u.imm_data;
hdrsize += 4;
wc.wc_flags = IB_WC_WITH_IMM;
- /* FALLTHROUGH */
+ goto send_last;
case OP(SEND_LAST):
+no_immediate_data:
+ wc.ex.imm_data = 0;
+ wc.wc_flags = 0;
send_last:
/* Get the number of bytes the message was padded by. */
pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
@@ -418,6 +417,12 @@
wc.src_qp = qp->remote_qpn;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
+ /* zero fields that are N/A */
+ wc.vendor_err = 0;
+ wc.pkey_index = 0;
+ wc.dlid_path_bits = 0;
+ wc.port_num = 0;
+ wc.csum_ok = 0;
/* Signal completion event if the solicited bit is set. */
qib_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
(ohdr->bth[0] &
@@ -546,6 +551,4 @@
qib_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
return;
-sunlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
}
diff --git a/drivers/infiniband/hw/qib/qib_user_pages.c b/drivers/infiniband/hw/qib/qib_user_pages.c
index 7689e49..2bc1d2b 100644
--- a/drivers/infiniband/hw/qib/qib_user_pages.c
+++ b/drivers/infiniband/hw/qib/qib_user_pages.c
@@ -74,7 +74,7 @@
goto bail_release;
}
- current->mm->locked_vm += num_pages;
+ current->mm->pinned_vm += num_pages;
ret = 0;
goto bail;
@@ -151,7 +151,7 @@
__qib_release_user_pages(p, num_pages, 1);
if (current->mm) {
- current->mm->locked_vm -= num_pages;
+ current->mm->pinned_vm -= num_pages;
up_write(¤t->mm->mmap_sem);
}
}
diff --git a/drivers/infiniband/hw/qib/qib_verbs.c b/drivers/infiniband/hw/qib/qib_verbs.c
index 9fab404..9627cb73 100644
--- a/drivers/infiniband/hw/qib/qib_verbs.c
+++ b/drivers/infiniband/hw/qib/qib_verbs.c
@@ -38,11 +38,12 @@
#include <linux/utsname.h>
#include <linux/rculist.h>
#include <linux/mm.h>
+#include <linux/random.h>
#include "qib.h"
#include "qib_common.h"
-static unsigned int ib_qib_qp_table_size = 251;
+static unsigned int ib_qib_qp_table_size = 256;
module_param_named(qp_table_size, ib_qib_qp_table_size, uint, S_IRUGO);
MODULE_PARM_DESC(qp_table_size, "QP table size");
@@ -659,17 +660,25 @@
if (atomic_dec_return(&mcast->refcount) <= 1)
wake_up(&mcast->wait);
} else {
- qp = qib_lookup_qpn(ibp, qp_num);
- if (!qp)
- goto drop;
+ if (rcd->lookaside_qp) {
+ if (rcd->lookaside_qpn != qp_num) {
+ if (atomic_dec_and_test(
+ &rcd->lookaside_qp->refcount))
+ wake_up(
+ &rcd->lookaside_qp->wait);
+ rcd->lookaside_qp = NULL;
+ }
+ }
+ if (!rcd->lookaside_qp) {
+ qp = qib_lookup_qpn(ibp, qp_num);
+ if (!qp)
+ goto drop;
+ rcd->lookaside_qp = qp;
+ rcd->lookaside_qpn = qp_num;
+ } else
+ qp = rcd->lookaside_qp;
ibp->n_unicast_rcv++;
qib_qp_rcv(rcd, hdr, lnh == QIB_LRH_GRH, data, tlen, qp);
- /*
- * Notify qib_destroy_qp() if it is waiting
- * for us to finish.
- */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
}
return;
@@ -1974,6 +1983,8 @@
ibp->z_excessive_buffer_overrun_errors =
cntrs.excessive_buffer_overrun_errors;
ibp->z_vl15_dropped = cntrs.vl15_dropped;
+ RCU_INIT_POINTER(ibp->qp0, NULL);
+ RCU_INIT_POINTER(ibp->qp1, NULL);
}
/**
@@ -1990,12 +2001,15 @@
int ret;
dev->qp_table_size = ib_qib_qp_table_size;
- dev->qp_table = kzalloc(dev->qp_table_size * sizeof *dev->qp_table,
+ get_random_bytes(&dev->qp_rnd, sizeof(dev->qp_rnd));
+ dev->qp_table = kmalloc(dev->qp_table_size * sizeof *dev->qp_table,
GFP_KERNEL);
if (!dev->qp_table) {
ret = -ENOMEM;
goto err_qpt;
}
+ for (i = 0; i < dev->qp_table_size; i++)
+ RCU_INIT_POINTER(dev->qp_table[i], NULL);
for (i = 0; i < dd->num_pports; i++)
init_ibport(ppd + i);
diff --git a/drivers/infiniband/hw/qib/qib_verbs.h b/drivers/infiniband/hw/qib/qib_verbs.h
index 95e5b47..0c19ef0 100644
--- a/drivers/infiniband/hw/qib/qib_verbs.h
+++ b/drivers/infiniband/hw/qib/qib_verbs.h
@@ -485,6 +485,7 @@
u8 alt_timeout; /* Alternate path timeout for this QP */
u8 port_num;
enum ib_mtu path_mtu;
+ u32 pmtu; /* decoded from path_mtu */
u32 remote_qpn;
u32 qkey; /* QKEY for this QP (for UD or RD) */
u32 s_size; /* send work queue size */
@@ -495,6 +496,7 @@
u32 s_last; /* last completed entry */
u32 s_ssn; /* SSN of tail entry */
u32 s_lsn; /* limit sequence number (credit) */
+ unsigned long timeout_jiffies; /* computed from timeout */
struct qib_swqe *s_wq; /* send work queue */
struct qib_swqe *s_wqe;
struct qib_rq r_rq; /* receive work queue */
@@ -723,7 +725,8 @@
dma_addr_t pio_hdrs_phys;
/* list of QPs waiting for RNR timer */
spinlock_t pending_lock; /* protect wait lists, PMA counters, etc. */
- unsigned qp_table_size; /* size of the hash table */
+ u32 qp_table_size; /* size of the hash table */
+ u32 qp_rnd; /* random bytes for hash */
spinlock_t qpt_lock;
u32 n_piowait;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index c74548a..231c2f2 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -84,7 +84,7 @@
ib_dma_unmap_single(priv->ca, mapping[0], IPOIB_CM_HEAD_SIZE, DMA_FROM_DEVICE);
for (i = 0; i < frags; ++i)
- ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_page(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE);
}
static int ipoib_cm_post_receive_srq(struct net_device *dev, int id)
@@ -183,7 +183,7 @@
ib_dma_unmap_single(priv->ca, mapping[0], IPOIB_CM_HEAD_SIZE, DMA_FROM_DEVICE);
for (; i > 0; --i)
- ib_dma_unmap_single(priv->ca, mapping[i], PAGE_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_page(priv->ca, mapping[i], PAGE_SIZE, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
return NULL;
@@ -1497,6 +1497,7 @@
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ib_srq_init_attr srq_init_attr = {
+ .srq_type = IB_SRQT_BASIC,
.attr = {
.max_wr = ipoib_recvq_size,
.max_sge = max_sge
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_fs.c b/drivers/infiniband/ulp/ipoib/ipoib_fs.c
index 86eae22..0e2fe463 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_fs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_fs.c
@@ -212,16 +212,15 @@
gid_buf, path.pathrec.dlid ? "yes" : "no");
if (path.pathrec.dlid) {
- rate = ib_rate_to_mult(path.pathrec.rate) * 25;
+ rate = ib_rate_to_mbps(path.pathrec.rate);
seq_printf(file,
" DLID: 0x%04x\n"
" SL: %12d\n"
- " rate: %*d%s Gb/sec\n",
+ " rate: %8d.%d Gb/sec\n",
be16_to_cpu(path.pathrec.dlid),
path.pathrec.sl,
- 10 - ((rate % 10) ? 2 : 0),
- rate / 10, rate % 10 ? ".5" : "");
+ rate / 1000, rate % 1000);
}
seq_putc(file, '\n');
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 9c61b9c..84e8c29 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -632,6 +632,59 @@
iser_conn_terminate(ib_conn);
}
+static mode_t iser_attr_is_visible(int param_type, int param)
+{
+ switch (param_type) {
+ case ISCSI_HOST_PARAM:
+ switch (param) {
+ case ISCSI_HOST_PARAM_NETDEV_NAME:
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ case ISCSI_HOST_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ case ISCSI_PARAM:
+ switch (param) {
+ case ISCSI_PARAM_MAX_RECV_DLENGTH:
+ case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+ case ISCSI_PARAM_HDRDGST_EN:
+ case ISCSI_PARAM_DATADGST_EN:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_EXP_STATSN:
+ case ISCSI_PARAM_PERSISTENT_ADDRESS:
+ case ISCSI_PARAM_PERSISTENT_PORT:
+ case ISCSI_PARAM_PING_TMO:
+ case ISCSI_PARAM_RECV_TMO:
+ case ISCSI_PARAM_INITIAL_R2T_EN:
+ case ISCSI_PARAM_MAX_R2T:
+ case ISCSI_PARAM_IMM_DATA_EN:
+ case ISCSI_PARAM_FIRST_BURST:
+ case ISCSI_PARAM_MAX_BURST:
+ case ISCSI_PARAM_PDU_INORDER_EN:
+ case ISCSI_PARAM_DATASEQ_INORDER_EN:
+ case ISCSI_PARAM_TARGET_NAME:
+ case ISCSI_PARAM_TPGT:
+ case ISCSI_PARAM_USERNAME:
+ case ISCSI_PARAM_PASSWORD:
+ case ISCSI_PARAM_USERNAME_IN:
+ case ISCSI_PARAM_PASSWORD_IN:
+ case ISCSI_PARAM_FAST_ABORT:
+ case ISCSI_PARAM_ABORT_TMO:
+ case ISCSI_PARAM_LU_RESET_TMO:
+ case ISCSI_PARAM_TGT_RESET_TMO:
+ case ISCSI_PARAM_IFACE_NAME:
+ case ISCSI_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
static struct scsi_host_template iscsi_iser_sht = {
.module = THIS_MODULE,
.name = "iSCSI Initiator over iSER, v." DRV_VER,
@@ -653,32 +706,6 @@
.owner = THIS_MODULE,
.name = "iser",
.caps = CAP_RECOVERY_L0 | CAP_MULTI_R2T,
- .param_mask = ISCSI_MAX_RECV_DLENGTH |
- ISCSI_MAX_XMIT_DLENGTH |
- ISCSI_HDRDGST_EN |
- ISCSI_DATADGST_EN |
- ISCSI_INITIAL_R2T_EN |
- ISCSI_MAX_R2T |
- ISCSI_IMM_DATA_EN |
- ISCSI_FIRST_BURST |
- ISCSI_MAX_BURST |
- ISCSI_PDU_INORDER_EN |
- ISCSI_DATASEQ_INORDER_EN |
- ISCSI_CONN_PORT |
- ISCSI_CONN_ADDRESS |
- ISCSI_EXP_STATSN |
- ISCSI_PERSISTENT_PORT |
- ISCSI_PERSISTENT_ADDRESS |
- ISCSI_TARGET_NAME | ISCSI_TPGT |
- ISCSI_USERNAME | ISCSI_PASSWORD |
- ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
- ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
- ISCSI_PING_TMO | ISCSI_RECV_TMO |
- ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
- .host_param_mask = ISCSI_HOST_HWADDRESS |
- ISCSI_HOST_NETDEV_NAME |
- ISCSI_HOST_INITIATOR_NAME,
/* session management */
.create_session = iscsi_iser_session_create,
.destroy_session = iscsi_iser_session_destroy,
@@ -686,6 +713,7 @@
.create_conn = iscsi_iser_conn_create,
.bind_conn = iscsi_iser_conn_bind,
.destroy_conn = iscsi_iser_conn_destroy,
+ .attr_is_visible = iser_attr_is_visible,
.set_param = iscsi_iser_set_param,
.get_conn_param = iscsi_conn_get_param,
.get_ep_param = iscsi_iser_get_ep_param,
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 23e82e46..001b147 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -3,7 +3,7 @@
#
menu "Input device support"
- depends on !S390
+ depends on !S390 && !UML
config INPUT
tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index 3367f76..480eb9d 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -309,9 +309,10 @@
* Once ff device is created you need to setup its upload, erase,
* playback and other handlers before registering input device
*/
-int input_ff_create(struct input_dev *dev, int max_effects)
+int input_ff_create(struct input_dev *dev, unsigned int max_effects)
{
struct ff_device *ff;
+ size_t ff_dev_size;
int i;
if (!max_effects) {
@@ -319,8 +320,12 @@
return -EINVAL;
}
- ff = kzalloc(sizeof(struct ff_device) +
- max_effects * sizeof(struct file *), GFP_KERNEL);
+ ff_dev_size = sizeof(struct ff_device) +
+ max_effects * sizeof(struct file *);
+ if (ff_dev_size < max_effects) /* overflow */
+ return -EINVAL;
+
+ ff = kzalloc(ff_dev_size, GFP_KERNEL);
if (!ff)
return -ENOMEM;
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index c48c81f..9150ee7 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -117,6 +117,7 @@
input_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, count == 2);
input_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, count == 3);
input_event(dev, EV_KEY, BTN_TOOL_QUADTAP, count == 4);
+ input_event(dev, EV_KEY, BTN_TOOL_QUINTTAP, count == 5);
}
EXPORT_SYMBOL(input_mt_report_finger_count);
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index b1aabde..b253973 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -49,8 +49,10 @@
dev->open(dev);
/* Only start polling if polling is enabled */
- if (dev->poll_interval > 0)
- queue_delayed_work(system_freezable_wq, &dev->work, 0);
+ if (dev->poll_interval > 0) {
+ dev->poll(dev);
+ input_polldev_queue_work(dev);
+ }
return 0;
}
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b4dee9d..615c21f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -33,10 +33,10 @@
module will be called adp5588-keys.
config KEYBOARD_ADP5589
- tristate "ADP5589 I2C QWERTY Keypad and IO Expander"
+ tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
depends on I2C
help
- Say Y here if you want to use a ADP5589 attached to your
+ Say Y here if you want to use a ADP5585/ADP5589 attached to your
system I2C bus.
To compile this driver as a module, choose M here: the
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index e34eeb8ae..4a7f534 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -550,7 +550,7 @@
}
error = request_irq(client->irq, adp5588_irq,
- IRQF_TRIGGER_FALLING | IRQF_DISABLED,
+ IRQF_TRIGGER_FALLING,
client->dev.driver->name, kpad);
if (error) {
dev_err(&client->dev, "irq %d busy?\n", client->irq);
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
index c770826..02b5d53 100644
--- a/drivers/input/keyboard/adp5589-keys.c
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -1,5 +1,5 @@
/*
- * Description: keypad driver for ADP5589
+ * Description: keypad driver for ADP5589, ADP5585
* I2C QWERTY Keypad and IO Expander
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -22,35 +22,165 @@
#include <linux/input/adp5589.h>
+/* ADP5589/ADP5585 Common Registers */
+#define ADP5589_5_ID 0x00
+#define ADP5589_5_INT_STATUS 0x01
+#define ADP5589_5_STATUS 0x02
+#define ADP5589_5_FIFO_1 0x03
+#define ADP5589_5_FIFO_2 0x04
+#define ADP5589_5_FIFO_3 0x05
+#define ADP5589_5_FIFO_4 0x06
+#define ADP5589_5_FIFO_5 0x07
+#define ADP5589_5_FIFO_6 0x08
+#define ADP5589_5_FIFO_7 0x09
+#define ADP5589_5_FIFO_8 0x0A
+#define ADP5589_5_FIFO_9 0x0B
+#define ADP5589_5_FIFO_10 0x0C
+#define ADP5589_5_FIFO_11 0x0D
+#define ADP5589_5_FIFO_12 0x0E
+#define ADP5589_5_FIFO_13 0x0F
+#define ADP5589_5_FIFO_14 0x10
+#define ADP5589_5_FIFO_15 0x11
+#define ADP5589_5_FIFO_16 0x12
+#define ADP5589_5_GPI_INT_STAT_A 0x13
+#define ADP5589_5_GPI_INT_STAT_B 0x14
+
+/* ADP5589 Registers */
+#define ADP5589_GPI_INT_STAT_C 0x15
+#define ADP5589_GPI_STATUS_A 0x16
+#define ADP5589_GPI_STATUS_B 0x17
+#define ADP5589_GPI_STATUS_C 0x18
+#define ADP5589_RPULL_CONFIG_A 0x19
+#define ADP5589_RPULL_CONFIG_B 0x1A
+#define ADP5589_RPULL_CONFIG_C 0x1B
+#define ADP5589_RPULL_CONFIG_D 0x1C
+#define ADP5589_RPULL_CONFIG_E 0x1D
+#define ADP5589_GPI_INT_LEVEL_A 0x1E
+#define ADP5589_GPI_INT_LEVEL_B 0x1F
+#define ADP5589_GPI_INT_LEVEL_C 0x20
+#define ADP5589_GPI_EVENT_EN_A 0x21
+#define ADP5589_GPI_EVENT_EN_B 0x22
+#define ADP5589_GPI_EVENT_EN_C 0x23
+#define ADP5589_GPI_INTERRUPT_EN_A 0x24
+#define ADP5589_GPI_INTERRUPT_EN_B 0x25
+#define ADP5589_GPI_INTERRUPT_EN_C 0x26
+#define ADP5589_DEBOUNCE_DIS_A 0x27
+#define ADP5589_DEBOUNCE_DIS_B 0x28
+#define ADP5589_DEBOUNCE_DIS_C 0x29
+#define ADP5589_GPO_DATA_OUT_A 0x2A
+#define ADP5589_GPO_DATA_OUT_B 0x2B
+#define ADP5589_GPO_DATA_OUT_C 0x2C
+#define ADP5589_GPO_OUT_MODE_A 0x2D
+#define ADP5589_GPO_OUT_MODE_B 0x2E
+#define ADP5589_GPO_OUT_MODE_C 0x2F
+#define ADP5589_GPIO_DIRECTION_A 0x30
+#define ADP5589_GPIO_DIRECTION_B 0x31
+#define ADP5589_GPIO_DIRECTION_C 0x32
+#define ADP5589_UNLOCK1 0x33
+#define ADP5589_UNLOCK2 0x34
+#define ADP5589_EXT_LOCK_EVENT 0x35
+#define ADP5589_UNLOCK_TIMERS 0x36
+#define ADP5589_LOCK_CFG 0x37
+#define ADP5589_RESET1_EVENT_A 0x38
+#define ADP5589_RESET1_EVENT_B 0x39
+#define ADP5589_RESET1_EVENT_C 0x3A
+#define ADP5589_RESET2_EVENT_A 0x3B
+#define ADP5589_RESET2_EVENT_B 0x3C
+#define ADP5589_RESET_CFG 0x3D
+#define ADP5589_PWM_OFFT_LOW 0x3E
+#define ADP5589_PWM_OFFT_HIGH 0x3F
+#define ADP5589_PWM_ONT_LOW 0x40
+#define ADP5589_PWM_ONT_HIGH 0x41
+#define ADP5589_PWM_CFG 0x42
+#define ADP5589_CLOCK_DIV_CFG 0x43
+#define ADP5589_LOGIC_1_CFG 0x44
+#define ADP5589_LOGIC_2_CFG 0x45
+#define ADP5589_LOGIC_FF_CFG 0x46
+#define ADP5589_LOGIC_INT_EVENT_EN 0x47
+#define ADP5589_POLL_PTIME_CFG 0x48
+#define ADP5589_PIN_CONFIG_A 0x49
+#define ADP5589_PIN_CONFIG_B 0x4A
+#define ADP5589_PIN_CONFIG_C 0x4B
+#define ADP5589_PIN_CONFIG_D 0x4C
+#define ADP5589_GENERAL_CFG 0x4D
+#define ADP5589_INT_EN 0x4E
+
+/* ADP5585 Registers */
+#define ADP5585_GPI_STATUS_A 0x15
+#define ADP5585_GPI_STATUS_B 0x16
+#define ADP5585_RPULL_CONFIG_A 0x17
+#define ADP5585_RPULL_CONFIG_B 0x18
+#define ADP5585_RPULL_CONFIG_C 0x19
+#define ADP5585_RPULL_CONFIG_D 0x1A
+#define ADP5585_GPI_INT_LEVEL_A 0x1B
+#define ADP5585_GPI_INT_LEVEL_B 0x1C
+#define ADP5585_GPI_EVENT_EN_A 0x1D
+#define ADP5585_GPI_EVENT_EN_B 0x1E
+#define ADP5585_GPI_INTERRUPT_EN_A 0x1F
+#define ADP5585_GPI_INTERRUPT_EN_B 0x20
+#define ADP5585_DEBOUNCE_DIS_A 0x21
+#define ADP5585_DEBOUNCE_DIS_B 0x22
+#define ADP5585_GPO_DATA_OUT_A 0x23
+#define ADP5585_GPO_DATA_OUT_B 0x24
+#define ADP5585_GPO_OUT_MODE_A 0x25
+#define ADP5585_GPO_OUT_MODE_B 0x26
+#define ADP5585_GPIO_DIRECTION_A 0x27
+#define ADP5585_GPIO_DIRECTION_B 0x28
+#define ADP5585_RESET1_EVENT_A 0x29
+#define ADP5585_RESET1_EVENT_B 0x2A
+#define ADP5585_RESET1_EVENT_C 0x2B
+#define ADP5585_RESET2_EVENT_A 0x2C
+#define ADP5585_RESET2_EVENT_B 0x2D
+#define ADP5585_RESET_CFG 0x2E
+#define ADP5585_PWM_OFFT_LOW 0x2F
+#define ADP5585_PWM_OFFT_HIGH 0x30
+#define ADP5585_PWM_ONT_LOW 0x31
+#define ADP5585_PWM_ONT_HIGH 0x32
+#define ADP5585_PWM_CFG 0x33
+#define ADP5585_LOGIC_CFG 0x34
+#define ADP5585_LOGIC_FF_CFG 0x35
+#define ADP5585_LOGIC_INT_EVENT_EN 0x36
+#define ADP5585_POLL_PTIME_CFG 0x37
+#define ADP5585_PIN_CONFIG_A 0x38
+#define ADP5585_PIN_CONFIG_B 0x39
+#define ADP5585_PIN_CONFIG_D 0x3A
+#define ADP5585_GENERAL_CFG 0x3B
+#define ADP5585_INT_EN 0x3C
+
+/* ID Register */
+#define ADP5589_5_DEVICE_ID_MASK 0xF
+#define ADP5589_5_MAN_ID_MASK 0xF
+#define ADP5589_5_MAN_ID_SHIFT 4
+#define ADP5589_5_MAN_ID 0x02
+
/* GENERAL_CFG Register */
#define OSC_EN (1 << 7)
#define CORE_CLK(x) (((x) & 0x3) << 5)
-#define LCK_TRK_LOGIC (1 << 4)
-#define LCK_TRK_GPI (1 << 3)
+#define LCK_TRK_LOGIC (1 << 4) /* ADP5589 only */
+#define LCK_TRK_GPI (1 << 3) /* ADP5589 only */
#define INT_CFG (1 << 1)
#define RST_CFG (1 << 0)
/* INT_EN Register */
-#define LOGIC2_IEN (1 << 5)
+#define LOGIC2_IEN (1 << 5) /* ADP5589 only */
#define LOGIC1_IEN (1 << 4)
-#define LOCK_IEN (1 << 3)
+#define LOCK_IEN (1 << 3) /* ADP5589 only */
#define OVRFLOW_IEN (1 << 2)
#define GPI_IEN (1 << 1)
#define EVENT_IEN (1 << 0)
/* Interrupt Status Register */
-#define LOGIC2_INT (1 << 5)
+#define LOGIC2_INT (1 << 5) /* ADP5589 only */
#define LOGIC1_INT (1 << 4)
-#define LOCK_INT (1 << 3)
+#define LOCK_INT (1 << 3) /* ADP5589 only */
#define OVRFLOW_INT (1 << 2)
#define GPI_INT (1 << 1)
#define EVENT_INT (1 << 0)
/* STATUS Register */
-
-#define LOGIC2_STAT (1 << 7)
+#define LOGIC2_STAT (1 << 7) /* ADP5589 only */
#define LOGIC1_STAT (1 << 6)
-#define LOCK_STAT (1 << 5)
+#define LOCK_STAT (1 << 5) /* ADP5589 only */
#define KEC 0xF
/* PIN_CONFIG_D Register */
@@ -61,27 +191,54 @@
#define LOCK_EN (1 << 0)
#define PTIME_MASK 0x3
-#define LTIME_MASK 0x3
+#define LTIME_MASK 0x3 /* ADP5589 only */
/* Key Event Register xy */
#define KEY_EV_PRESSED (1 << 7)
#define KEY_EV_MASK (0x7F)
#define KEYP_MAX_EVENT 16
+#define ADP5589_MAXGPIO 19
+#define ADP5585_MAXGPIO 11 /* 10 on the ADP5585-01, 11 on ADP5585-02 */
-#define MAXGPIO 19
-#define ADP_BANK(offs) ((offs) >> 3)
-#define ADP_BIT(offs) (1u << ((offs) & 0x7))
+enum {
+ ADP5589,
+ ADP5585_01,
+ ADP5585_02
+};
+
+struct adp_constants {
+ u8 maxgpio;
+ u8 keymapsize;
+ u8 gpi_pin_row_base;
+ u8 gpi_pin_row_end;
+ u8 gpi_pin_col_base;
+ u8 gpi_pin_base;
+ u8 gpi_pin_end;
+ u8 gpimapsize_max;
+ u8 max_row_num;
+ u8 max_col_num;
+ u8 row_mask;
+ u8 col_mask;
+ u8 col_shift;
+ u8 c4_extend_cfg;
+ u8 (*bank) (u8 offset);
+ u8 (*bit) (u8 offset);
+ u8 (*reg) (u8 reg);
+};
struct adp5589_kpad {
struct i2c_client *client;
struct input_dev *input;
+ const struct adp_constants *var;
unsigned short keycode[ADP5589_KEYMAPSIZE];
const struct adp5589_gpi_map *gpimap;
unsigned short gpimapsize;
unsigned extend_cfg;
+ bool is_adp5585;
+ bool adp5585_support_row5;
#ifdef CONFIG_GPIOLIB
- unsigned char gpiomap[MAXGPIO];
+ unsigned char gpiomap[ADP5589_MAXGPIO];
bool export_gpio;
struct gpio_chip gc;
struct mutex gpio_lock; /* Protect cached dir, dat_out */
@@ -90,6 +247,129 @@
#endif
};
+/*
+ * ADP5589 / ADP5585 derivative / variant handling
+ */
+
+
+/* ADP5589 */
+
+static unsigned char adp5589_bank(unsigned char offset)
+{
+ return offset >> 3;
+}
+
+static unsigned char adp5589_bit(unsigned char offset)
+{
+ return 1u << (offset & 0x7);
+}
+
+static unsigned char adp5589_reg(unsigned char reg)
+{
+ return reg;
+}
+
+static const struct adp_constants const_adp5589 = {
+ .maxgpio = ADP5589_MAXGPIO,
+ .keymapsize = ADP5589_KEYMAPSIZE,
+ .gpi_pin_row_base = ADP5589_GPI_PIN_ROW_BASE,
+ .gpi_pin_row_end = ADP5589_GPI_PIN_ROW_END,
+ .gpi_pin_col_base = ADP5589_GPI_PIN_COL_BASE,
+ .gpi_pin_base = ADP5589_GPI_PIN_BASE,
+ .gpi_pin_end = ADP5589_GPI_PIN_END,
+ .gpimapsize_max = ADP5589_GPIMAPSIZE_MAX,
+ .c4_extend_cfg = 12,
+ .max_row_num = ADP5589_MAX_ROW_NUM,
+ .max_col_num = ADP5589_MAX_COL_NUM,
+ .row_mask = ADP5589_ROW_MASK,
+ .col_mask = ADP5589_COL_MASK,
+ .col_shift = ADP5589_COL_SHIFT,
+ .bank = adp5589_bank,
+ .bit = adp5589_bit,
+ .reg = adp5589_reg,
+};
+
+/* ADP5585 */
+
+static unsigned char adp5585_bank(unsigned char offset)
+{
+ return offset > ADP5585_MAX_ROW_NUM;
+}
+
+static unsigned char adp5585_bit(unsigned char offset)
+{
+ return (offset > ADP5585_MAX_ROW_NUM) ?
+ 1u << (offset - ADP5585_COL_SHIFT) : 1u << offset;
+}
+
+static const unsigned char adp5585_reg_lut[] = {
+ [ADP5589_GPI_STATUS_A] = ADP5585_GPI_STATUS_A,
+ [ADP5589_GPI_STATUS_B] = ADP5585_GPI_STATUS_B,
+ [ADP5589_RPULL_CONFIG_A] = ADP5585_RPULL_CONFIG_A,
+ [ADP5589_RPULL_CONFIG_B] = ADP5585_RPULL_CONFIG_B,
+ [ADP5589_RPULL_CONFIG_C] = ADP5585_RPULL_CONFIG_C,
+ [ADP5589_RPULL_CONFIG_D] = ADP5585_RPULL_CONFIG_D,
+ [ADP5589_GPI_INT_LEVEL_A] = ADP5585_GPI_INT_LEVEL_A,
+ [ADP5589_GPI_INT_LEVEL_B] = ADP5585_GPI_INT_LEVEL_B,
+ [ADP5589_GPI_EVENT_EN_A] = ADP5585_GPI_EVENT_EN_A,
+ [ADP5589_GPI_EVENT_EN_B] = ADP5585_GPI_EVENT_EN_B,
+ [ADP5589_GPI_INTERRUPT_EN_A] = ADP5585_GPI_INTERRUPT_EN_A,
+ [ADP5589_GPI_INTERRUPT_EN_B] = ADP5585_GPI_INTERRUPT_EN_B,
+ [ADP5589_DEBOUNCE_DIS_A] = ADP5585_DEBOUNCE_DIS_A,
+ [ADP5589_DEBOUNCE_DIS_B] = ADP5585_DEBOUNCE_DIS_B,
+ [ADP5589_GPO_DATA_OUT_A] = ADP5585_GPO_DATA_OUT_A,
+ [ADP5589_GPO_DATA_OUT_B] = ADP5585_GPO_DATA_OUT_B,
+ [ADP5589_GPO_OUT_MODE_A] = ADP5585_GPO_OUT_MODE_A,
+ [ADP5589_GPO_OUT_MODE_B] = ADP5585_GPO_OUT_MODE_B,
+ [ADP5589_GPIO_DIRECTION_A] = ADP5585_GPIO_DIRECTION_A,
+ [ADP5589_GPIO_DIRECTION_B] = ADP5585_GPIO_DIRECTION_B,
+ [ADP5589_RESET1_EVENT_A] = ADP5585_RESET1_EVENT_A,
+ [ADP5589_RESET1_EVENT_B] = ADP5585_RESET1_EVENT_B,
+ [ADP5589_RESET1_EVENT_C] = ADP5585_RESET1_EVENT_C,
+ [ADP5589_RESET2_EVENT_A] = ADP5585_RESET2_EVENT_A,
+ [ADP5589_RESET2_EVENT_B] = ADP5585_RESET2_EVENT_B,
+ [ADP5589_RESET_CFG] = ADP5585_RESET_CFG,
+ [ADP5589_PWM_OFFT_LOW] = ADP5585_PWM_OFFT_LOW,
+ [ADP5589_PWM_OFFT_HIGH] = ADP5585_PWM_OFFT_HIGH,
+ [ADP5589_PWM_ONT_LOW] = ADP5585_PWM_ONT_LOW,
+ [ADP5589_PWM_ONT_HIGH] = ADP5585_PWM_ONT_HIGH,
+ [ADP5589_PWM_CFG] = ADP5585_PWM_CFG,
+ [ADP5589_LOGIC_1_CFG] = ADP5585_LOGIC_CFG,
+ [ADP5589_LOGIC_FF_CFG] = ADP5585_LOGIC_FF_CFG,
+ [ADP5589_LOGIC_INT_EVENT_EN] = ADP5585_LOGIC_INT_EVENT_EN,
+ [ADP5589_POLL_PTIME_CFG] = ADP5585_POLL_PTIME_CFG,
+ [ADP5589_PIN_CONFIG_A] = ADP5585_PIN_CONFIG_A,
+ [ADP5589_PIN_CONFIG_B] = ADP5585_PIN_CONFIG_B,
+ [ADP5589_PIN_CONFIG_D] = ADP5585_PIN_CONFIG_D,
+ [ADP5589_GENERAL_CFG] = ADP5585_GENERAL_CFG,
+ [ADP5589_INT_EN] = ADP5585_INT_EN,
+};
+
+static unsigned char adp5585_reg(unsigned char reg)
+{
+ return adp5585_reg_lut[reg];
+}
+
+static const struct adp_constants const_adp5585 = {
+ .maxgpio = ADP5585_MAXGPIO,
+ .keymapsize = ADP5585_KEYMAPSIZE,
+ .gpi_pin_row_base = ADP5585_GPI_PIN_ROW_BASE,
+ .gpi_pin_row_end = ADP5585_GPI_PIN_ROW_END,
+ .gpi_pin_col_base = ADP5585_GPI_PIN_COL_BASE,
+ .gpi_pin_base = ADP5585_GPI_PIN_BASE,
+ .gpi_pin_end = ADP5585_GPI_PIN_END,
+ .gpimapsize_max = ADP5585_GPIMAPSIZE_MAX,
+ .c4_extend_cfg = 10,
+ .max_row_num = ADP5585_MAX_ROW_NUM,
+ .max_col_num = ADP5585_MAX_COL_NUM,
+ .row_mask = ADP5585_ROW_MASK,
+ .col_mask = ADP5585_COL_MASK,
+ .col_shift = ADP5585_COL_SHIFT,
+ .bank = adp5585_bank,
+ .bit = adp5585_bit,
+ .reg = adp5585_reg,
+};
+
static int adp5589_read(struct i2c_client *client, u8 reg)
{
int ret = i2c_smbus_read_byte_data(client, reg);
@@ -109,19 +389,20 @@
static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+ unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
- return !!(adp5589_read(kpad->client, ADP5589_GPI_STATUS_A + bank) &
- bit);
+ return !!(adp5589_read(kpad->client,
+ kpad->var->reg(ADP5589_GPI_STATUS_A) + bank) &
+ bit);
}
static void adp5589_gpio_set_value(struct gpio_chip *chip,
unsigned off, int val)
{
struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+ unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
mutex_lock(&kpad->gpio_lock);
@@ -130,8 +411,8 @@
else
kpad->dat_out[bank] &= ~bit;
- adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank,
- kpad->dat_out[bank]);
+ adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A) +
+ bank, kpad->dat_out[bank]);
mutex_unlock(&kpad->gpio_lock);
}
@@ -139,14 +420,15 @@
static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off)
{
struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+ unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
kpad->dir[bank] &= ~bit;
- ret = adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank,
+ ret = adp5589_write(kpad->client,
+ kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank,
kpad->dir[bank]);
mutex_unlock(&kpad->gpio_lock);
@@ -158,8 +440,8 @@
unsigned off, int val)
{
struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = kpad->var->bank(kpad->gpiomap[off]);
+ unsigned int bit = kpad->var->bit(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
@@ -171,9 +453,10 @@
else
kpad->dat_out[bank] &= ~bit;
- ret = adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank,
- kpad->dat_out[bank]);
- ret |= adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank,
+ ret = adp5589_write(kpad->client, kpad->var->reg(ADP5589_GPO_DATA_OUT_A)
+ + bank, kpad->dat_out[bank]);
+ ret |= adp5589_write(kpad->client,
+ kpad->var->reg(ADP5589_GPIO_DIRECTION_A) + bank,
kpad->dir[bank]);
mutex_unlock(&kpad->gpio_lock);
@@ -184,26 +467,29 @@
static int __devinit adp5589_build_gpiomap(struct adp5589_kpad *kpad,
const struct adp5589_kpad_platform_data *pdata)
{
- bool pin_used[MAXGPIO];
+ bool pin_used[ADP5589_MAXGPIO];
int n_unused = 0;
int i;
memset(pin_used, false, sizeof(pin_used));
- for (i = 0; i < MAXGPIO; i++)
+ for (i = 0; i < kpad->var->maxgpio; i++)
if (pdata->keypad_en_mask & (1 << i))
pin_used[i] = true;
for (i = 0; i < kpad->gpimapsize; i++)
- pin_used[kpad->gpimap[i].pin - ADP5589_GPI_PIN_BASE] = true;
+ pin_used[kpad->gpimap[i].pin - kpad->var->gpi_pin_base] = true;
if (kpad->extend_cfg & R4_EXTEND_CFG)
pin_used[4] = true;
if (kpad->extend_cfg & C4_EXTEND_CFG)
- pin_used[12] = true;
+ pin_used[kpad->var->c4_extend_cfg] = true;
- for (i = 0; i < MAXGPIO; i++)
+ if (!kpad->adp5585_support_row5)
+ pin_used[5] = true;
+
+ for (i = 0; i < kpad->var->maxgpio; i++)
if (!pin_used[i])
kpad->gpiomap[n_unused++] = i;
@@ -246,11 +532,11 @@
return error;
}
- for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
- kpad->dat_out[i] = adp5589_read(kpad->client,
- ADP5589_GPO_DATA_OUT_A + i);
- kpad->dir[i] = adp5589_read(kpad->client,
- ADP5589_GPIO_DIRECTION_A + i);
+ for (i = 0; i <= kpad->var->bank(kpad->var->maxgpio); i++) {
+ kpad->dat_out[i] = adp5589_read(kpad->client, kpad->var->reg(
+ ADP5589_GPO_DATA_OUT_A) + i);
+ kpad->dir[i] = adp5589_read(kpad->client, kpad->var->reg(
+ ADP5589_GPIO_DIRECTION_A) + i);
}
if (gpio_data->setup) {
@@ -317,11 +603,11 @@
int i;
for (i = 0; i < ev_cnt; i++) {
- int key = adp5589_read(kpad->client, ADP5589_FIFO_1 + i);
+ int key = adp5589_read(kpad->client, ADP5589_5_FIFO_1 + i);
int key_val = key & KEY_EV_MASK;
- if (key_val >= ADP5589_GPI_PIN_BASE &&
- key_val <= ADP5589_GPI_PIN_END) {
+ if (key_val >= kpad->var->gpi_pin_base &&
+ key_val <= kpad->var->gpi_pin_end) {
adp5589_report_switches(kpad, key, key_val);
} else {
input_report_key(kpad->input,
@@ -337,29 +623,30 @@
struct i2c_client *client = kpad->client;
int status, ev_cnt;
- status = adp5589_read(client, ADP5589_INT_STATUS);
+ status = adp5589_read(client, ADP5589_5_INT_STATUS);
if (status & OVRFLOW_INT) /* Unlikely and should never happen */
dev_err(&client->dev, "Event Overflow Error\n");
if (status & EVENT_INT) {
- ev_cnt = adp5589_read(client, ADP5589_STATUS) & KEC;
+ ev_cnt = adp5589_read(client, ADP5589_5_STATUS) & KEC;
if (ev_cnt) {
adp5589_report_events(kpad, ev_cnt);
input_sync(kpad->input);
}
}
- adp5589_write(client, ADP5589_INT_STATUS, status); /* Status is W1C */
+ adp5589_write(client, ADP5589_5_INT_STATUS, status); /* Status is W1C */
return IRQ_HANDLED;
}
-static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key)
+static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad,
+ unsigned short key)
{
int i;
- for (i = 0; i < ADP5589_KEYMAPSIZE; i++)
+ for (i = 0; i < kpad->var->keymapsize; i++)
if (key == kpad->keycode[i])
return (i + 1) | KEY_EV_PRESSED;
@@ -372,19 +659,23 @@
{
struct i2c_client *client = kpad->client;
const struct adp5589_kpad_platform_data *pdata =
- client->dev.platform_data;
- int i, ret;
+ client->dev.platform_data;
+ u8 (*reg) (u8) = kpad->var->reg;
unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
unsigned char pull_mask = 0;
+ int i, ret;
- ret = adp5589_write(client, ADP5589_PIN_CONFIG_A,
- pdata->keypad_en_mask & 0xFF);
- ret |= adp5589_write(client, ADP5589_PIN_CONFIG_B,
- (pdata->keypad_en_mask >> 8) & 0xFF);
- ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C,
- (pdata->keypad_en_mask >> 16) & 0xFF);
+ ret = adp5589_write(client, reg(ADP5589_PIN_CONFIG_A),
+ pdata->keypad_en_mask & kpad->var->row_mask);
+ ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_B),
+ (pdata->keypad_en_mask >> kpad->var->col_shift) &
+ kpad->var->col_mask);
- if (pdata->en_keylock) {
+ if (!kpad->is_adp5585)
+ ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C,
+ (pdata->keypad_en_mask >> 16) & 0xFF);
+
+ if (!kpad->is_adp5585 && pdata->en_keylock) {
ret |= adp5589_write(client, ADP5589_UNLOCK1,
pdata->unlock_key1);
ret |= adp5589_write(client, ADP5589_UNLOCK2,
@@ -395,96 +686,130 @@
}
for (i = 0; i < KEYP_MAX_EVENT; i++)
- ret |= adp5589_read(client, ADP5589_FIFO_1 + i);
+ ret |= adp5589_read(client, ADP5589_5_FIFO_1 + i);
for (i = 0; i < pdata->gpimapsize; i++) {
unsigned short pin = pdata->gpimap[i].pin;
- if (pin <= ADP5589_GPI_PIN_ROW_END) {
- evt_mode1 |= (1 << (pin - ADP5589_GPI_PIN_ROW_BASE));
+ if (pin <= kpad->var->gpi_pin_row_end) {
+ evt_mode1 |= (1 << (pin - kpad->var->gpi_pin_row_base));
} else {
evt_mode2 |=
- ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) & 0xFF);
- evt_mode3 |=
- ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) >> 8);
+ ((1 << (pin - kpad->var->gpi_pin_col_base)) & 0xFF);
+ if (!kpad->is_adp5585)
+ evt_mode3 |= ((1 << (pin -
+ kpad->var->gpi_pin_col_base)) >> 8);
}
}
if (pdata->gpimapsize) {
- ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_A, evt_mode1);
- ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_B, evt_mode2);
- ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_C, evt_mode3);
+ ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_A),
+ evt_mode1);
+ ret |= adp5589_write(client, reg(ADP5589_GPI_EVENT_EN_B),
+ evt_mode2);
+ if (!kpad->is_adp5585)
+ ret |= adp5589_write(client,
+ reg(ADP5589_GPI_EVENT_EN_C),
+ evt_mode3);
}
if (pdata->pull_dis_mask & pdata->pullup_en_100k &
- pdata->pullup_en_300k & pdata->pulldown_en_300k)
+ pdata->pullup_en_300k & pdata->pulldown_en_300k)
dev_warn(&client->dev, "Conflicting pull resistor config\n");
- for (i = 0; i < MAXGPIO; i++) {
- unsigned val = 0;
-
- if (pdata->pullup_en_300k & (1 << i))
+ for (i = 0; i <= kpad->var->max_row_num; i++) {
+ unsigned val = 0, bit = (1 << i);
+ if (pdata->pullup_en_300k & bit)
val = 0;
- else if (pdata->pulldown_en_300k & (1 << i))
+ else if (pdata->pulldown_en_300k & bit)
val = 1;
- else if (pdata->pullup_en_100k & (1 << i))
+ else if (pdata->pullup_en_100k & bit)
val = 2;
- else if (pdata->pull_dis_mask & (1 << i))
+ else if (pdata->pull_dis_mask & bit)
val = 3;
pull_mask |= val << (2 * (i & 0x3));
- if ((i & 0x3) == 0x3 || i == MAXGPIO - 1) {
+ if (i == 3 || i == kpad->var->max_row_num) {
+ ret |= adp5589_write(client, reg(ADP5585_RPULL_CONFIG_A)
+ + (i >> 2), pull_mask);
+ pull_mask = 0;
+ }
+ }
+
+ for (i = 0; i <= kpad->var->max_col_num; i++) {
+ unsigned val = 0, bit = 1 << (i + kpad->var->col_shift);
+ if (pdata->pullup_en_300k & bit)
+ val = 0;
+ else if (pdata->pulldown_en_300k & bit)
+ val = 1;
+ else if (pdata->pullup_en_100k & bit)
+ val = 2;
+ else if (pdata->pull_dis_mask & bit)
+ val = 3;
+
+ pull_mask |= val << (2 * (i & 0x3));
+
+ if (i == 3 || i == kpad->var->max_col_num) {
ret |= adp5589_write(client,
- ADP5589_RPULL_CONFIG_A + (i >> 2),
- pull_mask);
+ reg(ADP5585_RPULL_CONFIG_C) +
+ (i >> 2), pull_mask);
pull_mask = 0;
}
}
if (pdata->reset1_key_1 && pdata->reset1_key_2 && pdata->reset1_key_3) {
- ret |= adp5589_write(client, ADP5589_RESET1_EVENT_A,
+ ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_A),
adp5589_get_evcode(kpad,
pdata->reset1_key_1));
- ret |= adp5589_write(client, ADP5589_RESET1_EVENT_B,
+ ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_B),
adp5589_get_evcode(kpad,
pdata->reset1_key_2));
- ret |= adp5589_write(client, ADP5589_RESET1_EVENT_C,
+ ret |= adp5589_write(client, reg(ADP5589_RESET1_EVENT_C),
adp5589_get_evcode(kpad,
pdata->reset1_key_3));
kpad->extend_cfg |= R4_EXTEND_CFG;
}
if (pdata->reset2_key_1 && pdata->reset2_key_2) {
- ret |= adp5589_write(client, ADP5589_RESET2_EVENT_A,
+ ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_A),
adp5589_get_evcode(kpad,
pdata->reset2_key_1));
- ret |= adp5589_write(client, ADP5589_RESET2_EVENT_B,
+ ret |= adp5589_write(client, reg(ADP5589_RESET2_EVENT_B),
adp5589_get_evcode(kpad,
pdata->reset2_key_2));
kpad->extend_cfg |= C4_EXTEND_CFG;
}
if (kpad->extend_cfg) {
- ret |= adp5589_write(client, ADP5589_RESET_CFG,
+ ret |= adp5589_write(client, reg(ADP5589_RESET_CFG),
pdata->reset_cfg);
- ret |= adp5589_write(client, ADP5589_PIN_CONFIG_D,
+ ret |= adp5589_write(client, reg(ADP5589_PIN_CONFIG_D),
kpad->extend_cfg);
}
- for (i = 0; i <= ADP_BANK(MAXGPIO); i++)
- ret |= adp5589_write(client, ADP5589_DEBOUNCE_DIS_A + i,
- pdata->debounce_dis_mask >> (i * 8));
+ ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_A),
+ pdata->debounce_dis_mask & kpad->var->row_mask);
- ret |= adp5589_write(client, ADP5589_POLL_PTIME_CFG,
+ ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_B),
+ (pdata->debounce_dis_mask >> kpad->var->col_shift)
+ & kpad->var->col_mask);
+
+ if (!kpad->is_adp5585)
+ ret |= adp5589_write(client, reg(ADP5589_DEBOUNCE_DIS_C),
+ (pdata->debounce_dis_mask >> 16) & 0xFF);
+
+ ret |= adp5589_write(client, reg(ADP5589_POLL_PTIME_CFG),
pdata->scan_cycle_time & PTIME_MASK);
- ret |= adp5589_write(client, ADP5589_INT_STATUS, LOGIC2_INT |
- LOGIC1_INT | OVRFLOW_INT | LOCK_INT |
+ ret |= adp5589_write(client, ADP5589_5_INT_STATUS,
+ (kpad->is_adp5585 ? 0 : LOGIC2_INT) |
+ LOGIC1_INT | OVRFLOW_INT |
+ (kpad->is_adp5585 ? 0 : LOCK_INT) |
GPI_INT | EVENT_INT); /* Status is W1C */
- ret |= adp5589_write(client, ADP5589_GENERAL_CFG,
+ ret |= adp5589_write(client, reg(ADP5589_GENERAL_CFG),
INT_CFG | OSC_EN | CORE_CLK(3));
- ret |= adp5589_write(client, ADP5589_INT_EN,
+ ret |= adp5589_write(client, reg(ADP5589_INT_EN),
OVRFLOW_IEN | GPI_IEN | EVENT_IEN);
if (ret < 0) {
@@ -497,30 +822,33 @@
static void __devinit adp5589_report_switch_state(struct adp5589_kpad *kpad)
{
- int gpi_stat1 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_A);
- int gpi_stat2 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_B);
- int gpi_stat3 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_C);
int gpi_stat_tmp, pin_loc;
int i;
+ int gpi_stat1 = adp5589_read(kpad->client,
+ kpad->var->reg(ADP5589_GPI_STATUS_A));
+ int gpi_stat2 = adp5589_read(kpad->client,
+ kpad->var->reg(ADP5589_GPI_STATUS_B));
+ int gpi_stat3 = !kpad->is_adp5585 ?
+ adp5589_read(kpad->client, ADP5589_GPI_STATUS_C) : 0;
for (i = 0; i < kpad->gpimapsize; i++) {
unsigned short pin = kpad->gpimap[i].pin;
- if (pin <= ADP5589_GPI_PIN_ROW_END) {
+ if (pin <= kpad->var->gpi_pin_row_end) {
gpi_stat_tmp = gpi_stat1;
- pin_loc = pin - ADP5589_GPI_PIN_ROW_BASE;
- } else if ((pin - ADP5589_GPI_PIN_COL_BASE) < 8) {
+ pin_loc = pin - kpad->var->gpi_pin_row_base;
+ } else if ((pin - kpad->var->gpi_pin_col_base) < 8) {
gpi_stat_tmp = gpi_stat2;
- pin_loc = pin - ADP5589_GPI_PIN_COL_BASE;
+ pin_loc = pin - kpad->var->gpi_pin_col_base;
} else {
gpi_stat_tmp = gpi_stat3;
- pin_loc = pin - ADP5589_GPI_PIN_COL_BASE - 8;
+ pin_loc = pin - kpad->var->gpi_pin_col_base - 8;
}
if (gpi_stat_tmp < 0) {
dev_err(&kpad->client->dev,
- "Can't read GPIO_DAT_STAT switch"
- " %d default to OFF\n", pin);
+ "Can't read GPIO_DAT_STAT switch %d, default to OFF\n",
+ pin);
gpi_stat_tmp = 0;
}
@@ -536,7 +864,8 @@
const struct i2c_device_id *id)
{
struct adp5589_kpad *kpad;
- const struct adp5589_kpad_platform_data *pdata;
+ const struct adp5589_kpad_platform_data *pdata =
+ client->dev.platform_data;
struct input_dev *input;
unsigned int revid;
int ret, i;
@@ -548,56 +877,79 @@
return -EIO;
}
- pdata = client->dev.platform_data;
if (!pdata) {
dev_err(&client->dev, "no platform data?\n");
return -EINVAL;
}
- if (!((pdata->keypad_en_mask & 0xFF) &&
- (pdata->keypad_en_mask >> 8)) || !pdata->keymap) {
- dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
- return -EINVAL;
+ kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
+ if (!kpad)
+ return -ENOMEM;
+
+ switch (id->driver_data) {
+ case ADP5585_02:
+ kpad->adp5585_support_row5 = true;
+ case ADP5585_01:
+ kpad->is_adp5585 = true;
+ kpad->var = &const_adp5585;
+ break;
+ case ADP5589:
+ kpad->var = &const_adp5589;
+ break;
}
- if (pdata->keymapsize != ADP5589_KEYMAPSIZE) {
+ if (!((pdata->keypad_en_mask & kpad->var->row_mask) &&
+ (pdata->keypad_en_mask >> kpad->var->col_shift)) ||
+ !pdata->keymap) {
+ dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
+ error = -EINVAL;
+ goto err_free_mem;
+ }
+
+ if (pdata->keymapsize != kpad->var->keymapsize) {
dev_err(&client->dev, "invalid keymapsize\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_free_mem;
}
if (!pdata->gpimap && pdata->gpimapsize) {
dev_err(&client->dev, "invalid gpimap from pdata\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_free_mem;
}
- if (pdata->gpimapsize > ADP5589_GPIMAPSIZE_MAX) {
+ if (pdata->gpimapsize > kpad->var->gpimapsize_max) {
dev_err(&client->dev, "invalid gpimapsize\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_free_mem;
}
for (i = 0; i < pdata->gpimapsize; i++) {
unsigned short pin = pdata->gpimap[i].pin;
- if (pin < ADP5589_GPI_PIN_BASE || pin > ADP5589_GPI_PIN_END) {
+ if (pin < kpad->var->gpi_pin_base ||
+ pin > kpad->var->gpi_pin_end) {
dev_err(&client->dev, "invalid gpi pin data\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_free_mem;
}
- if ((1 << (pin - ADP5589_GPI_PIN_ROW_BASE)) &
+ if ((1 << (pin - kpad->var->gpi_pin_row_base)) &
pdata->keypad_en_mask) {
dev_err(&client->dev, "invalid gpi row/col data\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_free_mem;
}
}
if (!client->irq) {
dev_err(&client->dev, "no IRQ?\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_free_mem;
}
- kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
input = input_allocate_device();
- if (!kpad || !input) {
+ if (!input) {
error = -ENOMEM;
goto err_free_mem;
}
@@ -605,13 +957,13 @@
kpad->client = client;
kpad->input = input;
- ret = adp5589_read(client, ADP5589_ID);
+ ret = adp5589_read(client, ADP5589_5_ID);
if (ret < 0) {
error = ret;
- goto err_free_mem;
+ goto err_free_input;
}
- revid = (u8) ret & ADP5589_DEVICE_ID_MASK;
+ revid = (u8) ret & ADP5589_5_DEVICE_ID_MASK;
input->name = client->name;
input->phys = "adp5589-keys/input0";
@@ -652,7 +1004,7 @@
error = input_register_device(input);
if (error) {
dev_err(&client->dev, "unable to register input device\n");
- goto err_free_mem;
+ goto err_free_input;
}
error = request_threaded_irq(client->irq, NULL, adp5589_irq,
@@ -685,8 +1037,9 @@
err_unreg_dev:
input_unregister_device(input);
input = NULL;
-err_free_mem:
+err_free_input:
input_free_device(input);
+err_free_mem:
kfree(kpad);
return error;
@@ -696,7 +1049,7 @@
{
struct adp5589_kpad *kpad = i2c_get_clientdata(client);
- adp5589_write(client, ADP5589_GENERAL_CFG, 0);
+ adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0);
free_irq(client->irq, kpad);
input_unregister_device(kpad->input);
adp5589_gpio_remove(kpad);
@@ -736,7 +1089,9 @@
static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume);
static const struct i2c_device_id adp5589_id[] = {
- {"adp5589-keys", 0},
+ {"adp5589-keys", ADP5589},
+ {"adp5585-keys", ADP5585_01},
+ {"adp5585-02-keys", ADP5585_02}, /* Adds ROW5 to ADP5585 */
{}
};
@@ -767,4 +1122,4 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("ADP5589 Keypad driver");
+MODULE_DESCRIPTION("ADP5589/ADP5585 Keypad driver");
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index cd89d171..9d82b3a 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -271,7 +271,7 @@
}
error = request_irq(davinci_ks->irq, davinci_ks_interrupt,
- IRQF_DISABLED, pdev->name, davinci_ks);
+ 0, pdev->name, davinci_ks);
if (error < 0) {
dev_err(dev, "unable to register davinci key scan interrupt\n");
goto fail5;
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index aa17e02..4662c5d 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -323,7 +323,7 @@
platform_set_drvdata(pdev, keypad);
err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
- IRQF_DISABLED, pdev->name, keypad);
+ 0, pdev->name, keypad);
if (err)
goto failed_free_dev;
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 67df91a..ed1ed46 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -461,8 +461,7 @@
struct device_node *node, *pp;
int i;
struct gpio_keys_button *buttons;
- const u32 *reg;
- int len;
+ u32 reg;
node = dev->of_node;
if (node == NULL)
@@ -470,7 +469,7 @@
memset(pdata, 0, sizeof *pdata);
- pdata->rep = !!of_get_property(node, "autorepeat", &len);
+ pdata->rep = !!of_get_property(node, "autorepeat", NULL);
/* First count the subnodes */
pdata->nbuttons = 0;
@@ -498,22 +497,25 @@
buttons[i].gpio = of_get_gpio_flags(pp, 0, &flags);
buttons[i].active_low = flags & OF_GPIO_ACTIVE_LOW;
- reg = of_get_property(pp, "linux,code", &len);
- if (!reg) {
+ if (of_property_read_u32(pp, "linux,code", ®)) {
dev_err(dev, "Button without keycode: 0x%x\n", buttons[i].gpio);
goto out_fail;
}
- buttons[i].code = be32_to_cpup(reg);
+ buttons[i].code = reg;
- buttons[i].desc = of_get_property(pp, "label", &len);
+ buttons[i].desc = of_get_property(pp, "label", NULL);
- reg = of_get_property(pp, "linux,input-type", &len);
- buttons[i].type = reg ? be32_to_cpup(reg) : EV_KEY;
+ if (of_property_read_u32(pp, "linux,input-type", ®) == 0)
+ buttons[i].type = reg;
+ else
+ buttons[i].type = EV_KEY;
buttons[i].wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
- reg = of_get_property(pp, "debounce-interval", &len);
- buttons[i].debounce_interval = reg ? be32_to_cpup(reg) : 5;
+ if (of_property_read_u32(pp, "debounce-interval", ®) == 0)
+ buttons[i].debounce_interval = reg;
+ else
+ buttons[i].debounce_interval = 5;
i++;
}
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index d92c15c..ccebd2d 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -510,7 +510,7 @@
/* Ensure that the keypad will stay dormant until opened */
imx_keypad_inhibit(keypad);
- error = request_irq(irq, imx_keypad_irq_handler, IRQF_DISABLED,
+ error = request_irq(irq, imx_keypad_irq_handler, 0,
pdev->name, keypad);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
@@ -567,10 +567,54 @@
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int imx_kbd_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_keypad *kbd = platform_get_drvdata(pdev);
+ struct input_dev *input_dev = kbd->input_dev;
+
+ /* imx kbd can wake up system even clock is disabled */
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ clk_disable(kbd->clk);
+
+ mutex_unlock(&input_dev->mutex);
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(kbd->irq);
+
+ return 0;
+}
+
+static int imx_kbd_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_keypad *kbd = platform_get_drvdata(pdev);
+ struct input_dev *input_dev = kbd->input_dev;
+
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(kbd->irq);
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ clk_enable(kbd->clk);
+
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume);
+
static struct platform_driver imx_keypad_driver = {
.driver = {
.name = "imx-keypad",
.owner = THIS_MODULE,
+ .pm = &imx_kbd_pm_ops,
},
.probe = imx_keypad_probe,
.remove = __devexit_p(imx_keypad_remove),
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index 2cd3e1d..0aa6740 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -129,7 +129,7 @@
err = request_irq(IRQ_GPIO0,
jornada720_kbd_interrupt,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING,
"jornadakbd", pdev);
if (err) {
printk(KERN_INFO "jornadakbd720_kbd: Unable to grab IRQ\n");
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 756348a..82d1dc8 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -788,7 +788,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
/*
* We don't need to explicitly suspend the chip, as it already switches off
* when there's no activity.
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index b02e4268..e2ae657 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -343,7 +343,6 @@
for (i = 0; i < pdata->num_row_gpios; i++) {
err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
matrix_keypad_interrupt,
- IRQF_DISABLED |
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"matrix-keypad", keypad);
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 33d0bdc..323bcdf 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,7 +35,7 @@
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <asm/irq.h>
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 4b0ec35..eca6ae6 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -535,7 +535,7 @@
input_dev->evbit[0] |= BIT_MASK(EV_REL);
}
- error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED,
+ error = request_irq(irq, pxa27x_keypad_irq_handler, 0,
pdev->name, keypad);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c
index b7123a4..35451bf 100644
--- a/drivers/input/keyboard/pxa930_rotary.c
+++ b/drivers/input/keyboard/pxa930_rotary.c
@@ -148,7 +148,7 @@
r->input_dev = input_dev;
input_set_drvdata(input_dev, r);
- err = request_irq(irq, rotary_irq, IRQF_DISABLED,
+ err = request_irq(irq, rotary_irq, 0,
"enhanced rotary", r);
if (err) {
dev_err(&pdev->dev, "failed to request IRQ\n");
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 99122f5..f60c9e8 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -90,7 +90,7 @@
bool keypad_stopped;
};
-static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
+static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
{
int ret;
struct tc3589x *tc3589x = keypad->tc3589x;
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index a5a7791..cf3228b 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -55,6 +55,7 @@
#define KBC_ROW_CFG0_0 0x8
#define KBC_COL_CFG0_0 0x18
+#define KBC_TO_CNT_0 0x24
#define KBC_INIT_DLY_0 0x28
#define KBC_RPT_DLY_0 0x2c
#define KBC_KP_ENT0_0 0x30
@@ -70,6 +71,7 @@
spinlock_t lock;
unsigned int repoll_dly;
unsigned long cp_dly_jiffies;
+ unsigned int cp_to_wkup_dly;
bool use_fn_map;
bool use_ghost_filter;
const struct tegra_kbc_platform_data *pdata;
@@ -258,12 +260,10 @@
u32 val = 0;
unsigned int i;
unsigned int num_down = 0;
- unsigned long flags;
bool fn_keypress = false;
bool key_in_same_row = false;
bool key_in_same_col = false;
- spin_lock_irqsave(&kbc->lock, flags);
for (i = 0; i < KBC_MAX_KPENT; i++) {
if ((i % 4) == 0)
val = readl(kbc->mmio + KBC_KP_ENT0_0 + i);
@@ -292,7 +292,7 @@
* any 2 of the 3 keys share a row, and any 2 of them share a column.
* If so ignore the key presses for this iteration.
*/
- if ((kbc->use_ghost_filter) && (num_down >= 3)) {
+ if (kbc->use_ghost_filter && num_down >= 3) {
for (i = 0; i < num_down; i++) {
unsigned int j;
u8 curr_col = scancodes[i] & 0x07;
@@ -325,8 +325,6 @@
}
}
- spin_unlock_irqrestore(&kbc->lock, flags);
-
/* Ignore the key presses for this iteration? */
if (key_in_same_col && key_in_same_row)
return;
@@ -341,6 +339,18 @@
kbc->num_pressed_keys = num_down;
}
+static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable)
+{
+ u32 val;
+
+ val = readl(kbc->mmio + KBC_CONTROL_0);
+ if (enable)
+ val |= KBC_CONTROL_FIFO_CNT_INT_EN;
+ else
+ val &= ~KBC_CONTROL_FIFO_CNT_INT_EN;
+ writel(val, kbc->mmio + KBC_CONTROL_0);
+}
+
static void tegra_kbc_keypress_timer(unsigned long data)
{
struct tegra_kbc *kbc = (struct tegra_kbc *)data;
@@ -348,6 +358,8 @@
u32 val;
unsigned int i;
+ spin_lock_irqsave(&kbc->lock, flags);
+
val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf;
if (val) {
unsigned long dly;
@@ -369,26 +381,19 @@
kbc->num_pressed_keys = 0;
/* All keys are released so enable the keypress interrupt */
- spin_lock_irqsave(&kbc->lock, flags);
- val = readl(kbc->mmio + KBC_CONTROL_0);
- val |= KBC_CONTROL_FIFO_CNT_INT_EN;
- writel(val, kbc->mmio + KBC_CONTROL_0);
- spin_unlock_irqrestore(&kbc->lock, flags);
+ tegra_kbc_set_fifo_interrupt(kbc, true);
}
+
+ spin_unlock_irqrestore(&kbc->lock, flags);
}
static irqreturn_t tegra_kbc_isr(int irq, void *args)
{
struct tegra_kbc *kbc = args;
- u32 val, ctl;
+ unsigned long flags;
+ u32 val;
- /*
- * Until all keys are released, defer further processing to
- * the polling loop in tegra_kbc_keypress_timer
- */
- ctl = readl(kbc->mmio + KBC_CONTROL_0);
- ctl &= ~KBC_CONTROL_FIFO_CNT_INT_EN;
- writel(ctl, kbc->mmio + KBC_CONTROL_0);
+ spin_lock_irqsave(&kbc->lock, flags);
/*
* Quickly bail out & reenable interrupts if the fifo threshold
@@ -399,15 +404,15 @@
if (val & KBC_INT_FIFO_CNT_INT_STATUS) {
/*
- * Schedule timer to run when hardware is in continuous
- * polling mode.
+ * Until all keys are released, defer further processing to
+ * the polling loop in tegra_kbc_keypress_timer.
*/
+ tegra_kbc_set_fifo_interrupt(kbc, false);
mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies);
- } else {
- ctl |= KBC_CONTROL_FIFO_CNT_INT_EN;
- writel(ctl, kbc->mmio + KBC_CONTROL_0);
}
+ spin_unlock_irqrestore(&kbc->lock, flags);
+
return IRQ_HANDLED;
}
@@ -455,7 +460,6 @@
static int tegra_kbc_start(struct tegra_kbc *kbc)
{
const struct tegra_kbc_platform_data *pdata = kbc->pdata;
- unsigned long flags;
unsigned int debounce_cnt;
u32 val = 0;
@@ -493,7 +497,6 @@
* Atomically clear out any remaining entries in the key FIFO
* and enable keyboard interrupts.
*/
- spin_lock_irqsave(&kbc->lock, flags);
while (1) {
val = readl(kbc->mmio + KBC_INT_0);
val >>= 4;
@@ -504,7 +507,6 @@
val = readl(kbc->mmio + KBC_KP_ENT1_0);
}
writel(0x7, kbc->mmio + KBC_INT_0);
- spin_unlock_irqrestore(&kbc->lock, flags);
enable_irq(kbc->irq);
@@ -734,18 +736,30 @@
struct platform_device *pdev = to_platform_device(dev);
struct tegra_kbc *kbc = platform_get_drvdata(pdev);
+ mutex_lock(&kbc->idev->mutex);
if (device_may_wakeup(&pdev->dev)) {
- tegra_kbc_setup_wakekeys(kbc, true);
- enable_irq_wake(kbc->irq);
+ disable_irq(kbc->irq);
+ del_timer_sync(&kbc->timer);
+ tegra_kbc_set_fifo_interrupt(kbc, false);
+
/* Forcefully clear the interrupt status */
writel(0x7, kbc->mmio + KBC_INT_0);
+ /*
+ * Store the previous resident time of continuous polling mode.
+ * Force the keyboard into interrupt mode.
+ */
+ kbc->cp_to_wkup_dly = readl(kbc->mmio + KBC_TO_CNT_0);
+ writel(0, kbc->mmio + KBC_TO_CNT_0);
+
+ tegra_kbc_setup_wakekeys(kbc, true);
msleep(30);
+
+ enable_irq_wake(kbc->irq);
} else {
- mutex_lock(&kbc->idev->mutex);
if (kbc->idev->users)
tegra_kbc_stop(kbc);
- mutex_unlock(&kbc->idev->mutex);
}
+ mutex_unlock(&kbc->idev->mutex);
return 0;
}
@@ -756,15 +770,22 @@
struct tegra_kbc *kbc = platform_get_drvdata(pdev);
int err = 0;
+ mutex_lock(&kbc->idev->mutex);
if (device_may_wakeup(&pdev->dev)) {
disable_irq_wake(kbc->irq);
tegra_kbc_setup_wakekeys(kbc, false);
+
+ /* Restore the resident time of continuous polling mode. */
+ writel(kbc->cp_to_wkup_dly, kbc->mmio + KBC_TO_CNT_0);
+
+ tegra_kbc_set_fifo_interrupt(kbc, true);
+
+ enable_irq(kbc->irq);
} else {
- mutex_lock(&kbc->idev->mutex);
if (kbc->idev->users)
err = tegra_kbc_start(kbc);
- mutex_unlock(&kbc->idev->mutex);
}
+ mutex_unlock(&kbc->idev->mutex);
return err;
}
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index ee2bf6b..318586d 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -203,7 +203,7 @@
input_dev->keycode, input_dev->keybit);
error = request_irq(keypad->irq, w90p910_keypad_irq_handler,
- IRQF_DISABLED, pdev->name, keypad);
+ 0, pdev->name, keypad);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto failed_put_clk;
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index c9104bb..22d875fd 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -62,6 +62,17 @@
To compile this driver as a module, choose M here: the
module will be called ad714x-spi.
+config INPUT_BMA150
+ tristate "BMA150/SMB380 acceleration sensor support"
+ depends on I2C
+ select INPUT_POLLDEV
+ help
+ Say Y here if you have Bosch Sensortec's BMA150 or SMB380
+ acceleration sensor hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bma150.
+
config INPUT_PCSPKR
tristate "PC Speaker support"
depends on PCSPKR_PLATFORM
@@ -74,6 +85,29 @@
To compile this driver as a module, choose M here: the
module will be called pcspkr.
+config INPUT_PM8XXX_VIBRATOR
+ tristate "Qualcomm PM8XXX vibrator support"
+ depends on MFD_PM8XXX
+ select INPUT_FF_MEMLESS
+ help
+ This option enables device driver support for the vibrator
+ on Qualcomm PM8xxx chip. This driver supports ff-memless interface
+ from input framework.
+
+ To compile this driver as module, choose M here: the
+ module will be called pm8xxx-vibrator.
+
+config INPUT_PMIC8XXX_PWRKEY
+ tristate "PMIC8XXX power key support"
+ depends on MFD_PM8XXX
+ help
+ Say Y here if you want support for the PMIC8XXX power key.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pmic8xxx-pwrkey.
+
config INPUT_SPARCSPKR
tristate "SPARC Speaker support"
depends on PCI && SPARC64
@@ -100,6 +134,16 @@
To compile this driver as a module, choose M here: the module
will be called max8925_onkey.
+config INPUT_MC13783_PWRBUTTON
+ tristate "MC13783 ON buttons"
+ depends on MFD_MC13783
+ help
+ Support the ON buttons of MC13783 PMIC as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mc13783-pwrbutton.
+
config INPUT_MMA8450
tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
depends on I2C
@@ -183,22 +227,6 @@
To compile this driver as a module, choose M here: the module will
be called atlas_btns.
-config INPUT_ATI_REMOTE
- tristate "ATI / X10 USB RF remote control"
- depends on USB_ARCH_HAS_HCD
- select USB
- help
- Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
- These are RF remotes with USB receivers.
- The ATI remote comes with many of ATI's All-In-Wonder video cards.
- The X10 "Lola" remote is available at:
- <http://www.x10.com/products/lola_sg1.htm>
- This driver provides mouse pointer, left and right mouse buttons,
- and maps all the other remote buttons to keypress events.
-
- To compile this driver as a module, choose M here: the module will be
- called ati_remote.
-
config INPUT_ATI_REMOTE2
tristate "ATI / Philips USB RF remote control"
depends on USB_ARCH_HAS_HCD
@@ -379,17 +407,6 @@
To compile this driver as a module, choose M here: the module will be
called pwm-beeper.
-config INPUT_PMIC8XXX_PWRKEY
- tristate "PMIC8XXX power key support"
- depends on MFD_PM8XXX
- help
- Say Y here if you want support for the PMIC8XXX power key.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called pmic8xxx-pwrkey.
-
config INPUT_GPIO_ROTARY_ENCODER
tristate "Rotary encoders connected to GPIO pins"
depends on GPIOLIB && GENERIC_GPIO
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 299ad5e..a244fc6 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -13,10 +13,10 @@
obj-$(CONFIG_INPUT_ADXL34X_I2C) += adxl34x-i2c.o
obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
-obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o
+obj-$(CONFIG_INPUT_BMA150) += bma150.o
obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
@@ -28,15 +28,17 @@
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
+obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
+obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o
+obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
-obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c
index 025417d..56810fb 100644
--- a/drivers/input/misc/ad714x-i2c.c
+++ b/drivers/input/misc/ad714x-i2c.c
@@ -116,13 +116,13 @@
.id_table = ad714x_id,
};
-static __init int ad714x_i2c_init(void)
+static int __init ad714x_i2c_init(void)
{
return i2c_add_driver(&ad714x_i2c_driver);
}
module_init(ad714x_i2c_init);
-static __exit void ad714x_i2c_exit(void)
+static void __exit ad714x_i2c_exit(void)
{
i2c_del_driver(&ad714x_i2c_driver);
}
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
deleted file mode 100644
index bce5712..0000000
--- a/drivers/input/misc/ati_remote.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/*
- * USB ATI Remote support
- *
- * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
- * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
- *
- * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
- * porting to the 2.6 kernel interfaces, along with other modification
- * to better match the style of the existing usb/input drivers. However, the
- * protocol and hardware handling is essentially unchanged from 2.1.1.
- *
- * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
- * Vojtech Pavlik.
- *
- * Changes:
- *
- * Feb 2004: Torrey Hoffman <thoffman@arnor.net>
- * Version 2.2.0
- * Jun 2004: Torrey Hoffman <thoffman@arnor.net>
- * Version 2.2.1
- * Added key repeat support contributed by:
- * Vincent Vanackere <vanackere@lif.univ-mrs.fr>
- * Added support for the "Lola" remote contributed by:
- * Seth Cohn <sethcohn@yahoo.com>
- *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- *
- * Hardware & software notes
- *
- * These remote controls are distributed by ATI as part of their
- * "All-In-Wonder" video card packages. The receiver self-identifies as a
- * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
- *
- * The "Lola" remote is available from X10. See:
- * http://www.x10.com/products/lola_sg1.htm
- * The Lola is similar to the ATI remote but has no mouse support, and slightly
- * different keys.
- *
- * It is possible to use multiple receivers and remotes on multiple computers
- * simultaneously by configuring them to use specific channels.
- *
- * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
- * Actually, it may even support more, at least in some revisions of the
- * hardware.
- *
- * Each remote can be configured to transmit on one channel as follows:
- * - Press and hold the "hand icon" button.
- * - When the red LED starts to blink, let go of the "hand icon" button.
- * - When it stops blinking, input the channel code as two digits, from 01
- * to 16, and press the hand icon again.
- *
- * The timing can be a little tricky. Try loading the module with debug=1
- * to have the kernel print out messages about the remote control number
- * and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
- *
- * The driver has a "channel_mask" parameter. This bitmask specifies which
- * channels will be ignored by the module. To mask out channels, just add
- * all the 2^channel_number values together.
- *
- * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
- * ignore signals coming from remote controls transmitting on channel 4, but
- * accept all other channels.
- *
- * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
- * ignored.
- *
- * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
- * parameter are unused.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb/input.h>
-#include <linux/wait.h>
-#include <linux/jiffies.h>
-
-/*
- * Module and Version Information, Module Parameters
- */
-
-#define ATI_REMOTE_VENDOR_ID 0x0bc7
-#define LOLA_REMOTE_PRODUCT_ID 0x0002
-#define LOLA2_REMOTE_PRODUCT_ID 0x0003
-#define ATI_REMOTE_PRODUCT_ID 0x0004
-#define NVIDIA_REMOTE_PRODUCT_ID 0x0005
-#define MEDION_REMOTE_PRODUCT_ID 0x0006
-
-#define DRIVER_VERSION "2.2.1"
-#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
-#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
-
-#define NAME_BUFSIZE 80 /* size of product name, path buffers */
-#define DATA_BUFSIZE 63 /* size of URB data buffers */
-
-/*
- * Duplicate event filtering time.
- * Sequential, identical KIND_FILTERED inputs with less than
- * FILTER_TIME milliseconds between them are considered as repeat
- * events. The hardware generates 5 events for the first keypress
- * and we have to take this into account for an accurate repeat
- * behaviour.
- */
-#define FILTER_TIME 60 /* msec */
-#define REPEAT_DELAY 500 /* msec */
-
-static unsigned long channel_mask;
-module_param(channel_mask, ulong, 0644);
-MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
-
-static int repeat_filter = FILTER_TIME;
-module_param(repeat_filter, int, 0644);
-MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
-
-static int repeat_delay = REPEAT_DELAY;
-module_param(repeat_delay, int, 0644);
-MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
-
-#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
-#undef err
-#define err(format, arg...) printk(KERN_ERR format , ## arg)
-
-static struct usb_device_id ati_remote_table[] = {
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ati_remote_table);
-
-/* Get hi and low bytes of a 16-bits int */
-#define HI(a) ((unsigned char)((a) >> 8))
-#define LO(a) ((unsigned char)((a) & 0xff))
-
-#define SEND_FLAG_IN_PROGRESS 1
-#define SEND_FLAG_COMPLETE 2
-
-/* Device initialization strings */
-static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
-static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
-
-struct ati_remote {
- struct input_dev *idev;
- struct usb_device *udev;
- struct usb_interface *interface;
-
- struct urb *irq_urb;
- struct urb *out_urb;
- struct usb_endpoint_descriptor *endpoint_in;
- struct usb_endpoint_descriptor *endpoint_out;
- unsigned char *inbuf;
- unsigned char *outbuf;
- dma_addr_t inbuf_dma;
- dma_addr_t outbuf_dma;
-
- unsigned char old_data[2]; /* Detect duplicate events */
- unsigned long old_jiffies;
- unsigned long acc_jiffies; /* handle acceleration */
- unsigned long first_jiffies;
-
- unsigned int repeat_count;
-
- char name[NAME_BUFSIZE];
- char phys[NAME_BUFSIZE];
-
- wait_queue_head_t wait;
- int send_flags;
-};
-
-/* "Kinds" of messages sent from the hardware to the driver. */
-#define KIND_END 0
-#define KIND_LITERAL 1 /* Simply pass to input system */
-#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */
-#define KIND_LU 3 /* Directional keypad diagonals - left up, */
-#define KIND_RU 4 /* right up, */
-#define KIND_LD 5 /* left down, */
-#define KIND_RD 6 /* right down */
-#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
-
-/* Translation table from hardware messages to input events. */
-static const struct {
- short kind;
- unsigned char data1, data2;
- int type;
- unsigned int code;
- int value;
-} ati_remote_tbl[] = {
- /* Directional control pad axes */
- {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
- {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
- {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
- {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
- /* Directional control pad diagonals */
- {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
- {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
- {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
- {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
-
- /* "Mouse button" buttons */
- {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
- {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
- {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
- {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
-
- /* Artificial "doubleclick" events are generated by the hardware.
- * They are mapped to the "side" and "extra" mouse buttons here. */
- {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
- {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
-
- /* keyboard. */
- {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
- {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
- {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
- {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
- {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
- {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
- {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
- {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
- {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
- {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
- {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
- {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
- {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
- {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
- {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
- {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
-
- /* "special" keys */
- {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */
- {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */
- {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */
- {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */
- {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */
- {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */
- {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */
- {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */
- {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */
- {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */
- {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */
- {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */
- {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */
- {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */
- {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */
- {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
- {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */
- {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */
- {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */
- {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
- {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */
- {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
- {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
- {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
- {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
- {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
- {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
- {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
- {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
- {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
- {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
- {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
-
- {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
-};
-
-/* Local function prototypes */
-static int ati_remote_open (struct input_dev *inputdev);
-static void ati_remote_close (struct input_dev *inputdev);
-static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
-static void ati_remote_irq_out (struct urb *urb);
-static void ati_remote_irq_in (struct urb *urb);
-static void ati_remote_input_report (struct urb *urb);
-static int ati_remote_initialize (struct ati_remote *ati_remote);
-static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id);
-static void ati_remote_disconnect (struct usb_interface *interface);
-
-/* usb specific object to register with the usb subsystem */
-static struct usb_driver ati_remote_driver = {
- .name = "ati_remote",
- .probe = ati_remote_probe,
- .disconnect = ati_remote_disconnect,
- .id_table = ati_remote_table,
-};
-
-/*
- * ati_remote_dump_input
- */
-static void ati_remote_dump(struct device *dev, unsigned char *data,
- unsigned int len)
-{
- if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
- dev_warn(dev, "Weird byte 0x%02x\n", data[0]);
- else if (len == 4)
- dev_warn(dev, "Weird key %02x %02x %02x %02x\n",
- data[0], data[1], data[2], data[3]);
- else
- dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n",
- len, data[0], data[1], data[2], data[3], data[4], data[5]);
-}
-
-/*
- * ati_remote_open
- */
-static int ati_remote_open(struct input_dev *inputdev)
-{
- struct ati_remote *ati_remote = input_get_drvdata(inputdev);
-
- /* On first open, submit the read urb which was set up previously. */
- ati_remote->irq_urb->dev = ati_remote->udev;
- if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
- dev_err(&ati_remote->interface->dev,
- "%s: usb_submit_urb failed!\n", __func__);
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * ati_remote_close
- */
-static void ati_remote_close(struct input_dev *inputdev)
-{
- struct ati_remote *ati_remote = input_get_drvdata(inputdev);
-
- usb_kill_urb(ati_remote->irq_urb);
-}
-
-/*
- * ati_remote_irq_out
- */
-static void ati_remote_irq_out(struct urb *urb)
-{
- struct ati_remote *ati_remote = urb->context;
-
- if (urb->status) {
- dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
- __func__, urb->status);
- return;
- }
-
- ati_remote->send_flags |= SEND_FLAG_COMPLETE;
- wmb();
- wake_up(&ati_remote->wait);
-}
-
-/*
- * ati_remote_sendpacket
- *
- * Used to send device initialization strings
- */
-static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
-{
- int retval = 0;
-
- /* Set up out_urb */
- memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
- ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
-
- ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
- ati_remote->out_urb->dev = ati_remote->udev;
- ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
-
- retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
- if (retval) {
- dev_dbg(&ati_remote->interface->dev,
- "sendpacket: usb_submit_urb failed: %d\n", retval);
- return retval;
- }
-
- wait_event_timeout(ati_remote->wait,
- ((ati_remote->out_urb->status != -EINPROGRESS) ||
- (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
- HZ);
- usb_kill_urb(ati_remote->out_urb);
-
- return retval;
-}
-
-/*
- * ati_remote_event_lookup
- */
-static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
-{
- int i;
-
- for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
- /*
- * Decide if the table entry matches the remote input.
- */
- if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
- ((((ati_remote_tbl[i].data1 >> 4) -
- (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
- (ati_remote_tbl[i].data2 == d2))
- return i;
-
- }
- return -1;
-}
-
-/*
- * ati_remote_compute_accel
- *
- * Implements acceleration curve for directional control pad
- * If elapsed time since last event is > 1/4 second, user "stopped",
- * so reset acceleration. Otherwise, user is probably holding the control
- * pad down, so we increase acceleration, ramping up over two seconds to
- * a maximum speed.
- */
-static int ati_remote_compute_accel(struct ati_remote *ati_remote)
-{
- static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
- unsigned long now = jiffies;
- int acc;
-
- if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
- acc = 1;
- ati_remote->acc_jiffies = now;
- }
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
- acc = accel[0];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
- acc = accel[1];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
- acc = accel[2];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
- acc = accel[3];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
- acc = accel[4];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
- acc = accel[5];
- else
- acc = accel[6];
-
- return acc;
-}
-
-/*
- * ati_remote_report_input
- */
-static void ati_remote_input_report(struct urb *urb)
-{
- struct ati_remote *ati_remote = urb->context;
- unsigned char *data= ati_remote->inbuf;
- struct input_dev *dev = ati_remote->idev;
- int index, acc;
- int remote_num;
-
- /* Deal with strange looking inputs */
- if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
- ((data[3] & 0x0f) != 0x00) ) {
- ati_remote_dump(&urb->dev->dev, data, urb->actual_length);
- return;
- }
-
- /* Mask unwanted remote channels. */
- /* note: remote_num is 0-based, channel 1 on remote == 0 here */
- remote_num = (data[3] >> 4) & 0x0f;
- if (channel_mask & (1 << (remote_num + 1))) {
- dbginfo(&ati_remote->interface->dev,
- "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
- remote_num, data[1], data[2], channel_mask);
- return;
- }
-
- /* Look up event code index in translation table */
- index = ati_remote_event_lookup(remote_num, data[1], data[2]);
- if (index < 0) {
- dev_warn(&ati_remote->interface->dev,
- "Unknown input from channel 0x%02x: data %02x,%02x\n",
- remote_num, data[1], data[2]);
- return;
- }
- dbginfo(&ati_remote->interface->dev,
- "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
- remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
-
- if (ati_remote_tbl[index].kind == KIND_LITERAL) {
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code,
- ati_remote_tbl[index].value);
- input_sync(dev);
-
- ati_remote->old_jiffies = jiffies;
- return;
- }
-
- if (ati_remote_tbl[index].kind == KIND_FILTERED) {
- unsigned long now = jiffies;
-
- /* Filter duplicate events which happen "too close" together. */
- if (ati_remote->old_data[0] == data[1] &&
- ati_remote->old_data[1] == data[2] &&
- time_before(now, ati_remote->old_jiffies +
- msecs_to_jiffies(repeat_filter))) {
- ati_remote->repeat_count++;
- } else {
- ati_remote->repeat_count = 0;
- ati_remote->first_jiffies = now;
- }
-
- ati_remote->old_data[0] = data[1];
- ati_remote->old_data[1] = data[2];
- ati_remote->old_jiffies = now;
-
- /* Ensure we skip at least the 4 first duplicate events (generated
- * by a single keypress), and continue skipping until repeat_delay
- * msecs have passed
- */
- if (ati_remote->repeat_count > 0 &&
- (ati_remote->repeat_count < 5 ||
- time_before(now, ati_remote->first_jiffies +
- msecs_to_jiffies(repeat_delay))))
- return;
-
-
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code, 1);
- input_sync(dev);
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code, 0);
- input_sync(dev);
-
- } else {
-
- /*
- * Other event kinds are from the directional control pad, and have an
- * acceleration factor applied to them. Without this acceleration, the
- * control pad is mostly unusable.
- */
- acc = ati_remote_compute_accel(ati_remote);
-
- switch (ati_remote_tbl[index].kind) {
- case KIND_ACCEL:
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code,
- ati_remote_tbl[index].value * acc);
- break;
- case KIND_LU:
- input_report_rel(dev, REL_X, -acc);
- input_report_rel(dev, REL_Y, -acc);
- break;
- case KIND_RU:
- input_report_rel(dev, REL_X, acc);
- input_report_rel(dev, REL_Y, -acc);
- break;
- case KIND_LD:
- input_report_rel(dev, REL_X, -acc);
- input_report_rel(dev, REL_Y, acc);
- break;
- case KIND_RD:
- input_report_rel(dev, REL_X, acc);
- input_report_rel(dev, REL_Y, acc);
- break;
- default:
- dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
- ati_remote_tbl[index].kind);
- }
- input_sync(dev);
-
- ati_remote->old_jiffies = jiffies;
- ati_remote->old_data[0] = data[1];
- ati_remote->old_data[1] = data[2];
- }
-}
-
-/*
- * ati_remote_irq_in
- */
-static void ati_remote_irq_in(struct urb *urb)
-{
- struct ati_remote *ati_remote = urb->context;
- int retval;
-
- switch (urb->status) {
- case 0: /* success */
- ati_remote_input_report(urb);
- break;
- case -ECONNRESET: /* unlink */
- case -ENOENT:
- case -ESHUTDOWN:
- dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
- __func__);
- return;
- default: /* error */
- dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
- __func__, urb->status);
- }
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
- dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
- __func__, retval);
-}
-
-/*
- * ati_remote_alloc_buffers
- */
-static int ati_remote_alloc_buffers(struct usb_device *udev,
- struct ati_remote *ati_remote)
-{
- ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
- &ati_remote->inbuf_dma);
- if (!ati_remote->inbuf)
- return -1;
-
- ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
- &ati_remote->outbuf_dma);
- if (!ati_remote->outbuf)
- return -1;
-
- ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->irq_urb)
- return -1;
-
- ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->out_urb)
- return -1;
-
- return 0;
-}
-
-/*
- * ati_remote_free_buffers
- */
-static void ati_remote_free_buffers(struct ati_remote *ati_remote)
-{
- usb_free_urb(ati_remote->irq_urb);
- usb_free_urb(ati_remote->out_urb);
-
- usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->inbuf, ati_remote->inbuf_dma);
-
- usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->outbuf, ati_remote->outbuf_dma);
-}
-
-static void ati_remote_input_init(struct ati_remote *ati_remote)
-{
- struct input_dev *idev = ati_remote->idev;
- int i;
-
- idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
- BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
- idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
- for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
- if (ati_remote_tbl[i].type == EV_KEY)
- set_bit(ati_remote_tbl[i].code, idev->keybit);
-
- input_set_drvdata(idev, ati_remote);
-
- idev->open = ati_remote_open;
- idev->close = ati_remote_close;
-
- idev->name = ati_remote->name;
- idev->phys = ati_remote->phys;
-
- usb_to_input_id(ati_remote->udev, &idev->id);
- idev->dev.parent = &ati_remote->udev->dev;
-}
-
-static int ati_remote_initialize(struct ati_remote *ati_remote)
-{
- struct usb_device *udev = ati_remote->udev;
- int pipe, maxp;
-
- init_waitqueue_head(&ati_remote->wait);
-
- /* Set up irq_urb */
- pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
-
- usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
- maxp, ati_remote_irq_in, ati_remote,
- ati_remote->endpoint_in->bInterval);
- ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
- ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- /* Set up out_urb */
- pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
-
- usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
- maxp, ati_remote_irq_out, ati_remote,
- ati_remote->endpoint_out->bInterval);
- ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
- ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- /* send initialization strings */
- if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
- (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
- dev_err(&ati_remote->interface->dev,
- "Initializing ati_remote hardware failed.\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * ati_remote_probe
- */
-static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_host_interface *iface_host = interface->cur_altsetting;
- struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
- struct ati_remote *ati_remote;
- struct input_dev *input_dev;
- int err = -ENOMEM;
-
- if (iface_host->desc.bNumEndpoints != 2) {
- err("%s: Unexpected desc.bNumEndpoints\n", __func__);
- return -ENODEV;
- }
-
- endpoint_in = &iface_host->endpoint[0].desc;
- endpoint_out = &iface_host->endpoint[1].desc;
-
- if (!usb_endpoint_is_int_in(endpoint_in)) {
- err("%s: Unexpected endpoint_in\n", __func__);
- return -ENODEV;
- }
- if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
- err("%s: endpoint_in message size==0? \n", __func__);
- return -ENODEV;
- }
-
- ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ati_remote || !input_dev)
- goto fail1;
-
- /* Allocate URB buffers, URBs */
- if (ati_remote_alloc_buffers(udev, ati_remote))
- goto fail2;
-
- ati_remote->endpoint_in = endpoint_in;
- ati_remote->endpoint_out = endpoint_out;
- ati_remote->udev = udev;
- ati_remote->idev = input_dev;
- ati_remote->interface = interface;
-
- usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
- strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
-
- if (udev->manufacturer)
- strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
-
- if (udev->product)
- snprintf(ati_remote->name, sizeof(ati_remote->name),
- "%s %s", ati_remote->name, udev->product);
-
- if (!strlen(ati_remote->name))
- snprintf(ati_remote->name, sizeof(ati_remote->name),
- DRIVER_DESC "(%04x,%04x)",
- le16_to_cpu(ati_remote->udev->descriptor.idVendor),
- le16_to_cpu(ati_remote->udev->descriptor.idProduct));
-
- ati_remote_input_init(ati_remote);
-
- /* Device Hardware Initialization - fills in ati_remote->idev from udev. */
- err = ati_remote_initialize(ati_remote);
- if (err)
- goto fail3;
-
- /* Set up and register input device */
- err = input_register_device(ati_remote->idev);
- if (err)
- goto fail3;
-
- usb_set_intfdata(interface, ati_remote);
- return 0;
-
- fail3: usb_kill_urb(ati_remote->irq_urb);
- usb_kill_urb(ati_remote->out_urb);
- fail2: ati_remote_free_buffers(ati_remote);
- fail1: input_free_device(input_dev);
- kfree(ati_remote);
- return err;
-}
-
-/*
- * ati_remote_disconnect
- */
-static void ati_remote_disconnect(struct usb_interface *interface)
-{
- struct ati_remote *ati_remote;
-
- ati_remote = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
- if (!ati_remote) {
- dev_warn(&interface->dev, "%s - null device?\n", __func__);
- return;
- }
-
- usb_kill_urb(ati_remote->irq_urb);
- usb_kill_urb(ati_remote->out_urb);
- input_unregister_device(ati_remote->idev);
- ati_remote_free_buffers(ati_remote);
- kfree(ati_remote);
-}
-
-/*
- * ati_remote_init
- */
-static int __init ati_remote_init(void)
-{
- int result;
-
- result = usb_register(&ati_remote_driver);
- if (result)
- printk(KERN_ERR KBUILD_MODNAME
- ": usb_register error #%d\n", result);
- else
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
-
- return result;
-}
-
-/*
- * ati_remote_exit
- */
-static void __exit ati_remote_exit(void)
-{
- usb_deregister(&ati_remote_driver);
-}
-
-/*
- * module specification
- */
-
-module_init(ati_remote_init);
-module_exit(ati_remote_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
new file mode 100644
index 0000000..8f55b54
--- /dev/null
+++ b/drivers/input/misc/bma150.c
@@ -0,0 +1,691 @@
+/*
+ * Copyright (c) 2011 Bosch Sensortec GmbH
+ * Copyright (c) 2011 Unixphere
+ *
+ * This driver adds support for Bosch Sensortec's digital acceleration
+ * sensors BMA150 and SMB380.
+ * The SMB380 is fully compatible with BMA150 and only differs in packaging.
+ *
+ * The datasheet for the BMA150 chip can be found here:
+ * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMA150-DS000-07.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/bma150.h>
+
+#define ABSMAX_ACC_VAL 0x01FF
+#define ABSMIN_ACC_VAL -(ABSMAX_ACC_VAL)
+
+/* Each axis is represented by a 2-byte data word */
+#define BMA150_XYZ_DATA_SIZE 6
+
+/* Input poll interval in milliseconds */
+#define BMA150_POLL_INTERVAL 10
+#define BMA150_POLL_MAX 200
+#define BMA150_POLL_MIN 0
+
+#define BMA150_BW_25HZ 0
+#define BMA150_BW_50HZ 1
+#define BMA150_BW_100HZ 2
+#define BMA150_BW_190HZ 3
+#define BMA150_BW_375HZ 4
+#define BMA150_BW_750HZ 5
+#define BMA150_BW_1500HZ 6
+
+#define BMA150_RANGE_2G 0
+#define BMA150_RANGE_4G 1
+#define BMA150_RANGE_8G 2
+
+#define BMA150_MODE_NORMAL 0
+#define BMA150_MODE_SLEEP 2
+#define BMA150_MODE_WAKE_UP 3
+
+/* Data register addresses */
+#define BMA150_DATA_0_REG 0x00
+#define BMA150_DATA_1_REG 0x01
+#define BMA150_DATA_2_REG 0x02
+
+/* Control register addresses */
+#define BMA150_CTRL_0_REG 0x0A
+#define BMA150_CTRL_1_REG 0x0B
+#define BMA150_CTRL_2_REG 0x14
+#define BMA150_CTRL_3_REG 0x15
+
+/* Configuration/Setting register addresses */
+#define BMA150_CFG_0_REG 0x0C
+#define BMA150_CFG_1_REG 0x0D
+#define BMA150_CFG_2_REG 0x0E
+#define BMA150_CFG_3_REG 0x0F
+#define BMA150_CFG_4_REG 0x10
+#define BMA150_CFG_5_REG 0x11
+
+#define BMA150_CHIP_ID 2
+#define BMA150_CHIP_ID_REG BMA150_DATA_0_REG
+
+#define BMA150_ACC_X_LSB_REG BMA150_DATA_2_REG
+
+#define BMA150_SLEEP_POS 0
+#define BMA150_SLEEP_MSK 0x01
+#define BMA150_SLEEP_REG BMA150_CTRL_0_REG
+
+#define BMA150_BANDWIDTH_POS 0
+#define BMA150_BANDWIDTH_MSK 0x07
+#define BMA150_BANDWIDTH_REG BMA150_CTRL_2_REG
+
+#define BMA150_RANGE_POS 3
+#define BMA150_RANGE_MSK 0x18
+#define BMA150_RANGE_REG BMA150_CTRL_2_REG
+
+#define BMA150_WAKE_UP_POS 0
+#define BMA150_WAKE_UP_MSK 0x01
+#define BMA150_WAKE_UP_REG BMA150_CTRL_3_REG
+
+#define BMA150_SW_RES_POS 1
+#define BMA150_SW_RES_MSK 0x02
+#define BMA150_SW_RES_REG BMA150_CTRL_0_REG
+
+/* Any-motion interrupt register fields */
+#define BMA150_ANY_MOTION_EN_POS 6
+#define BMA150_ANY_MOTION_EN_MSK 0x40
+#define BMA150_ANY_MOTION_EN_REG BMA150_CTRL_1_REG
+
+#define BMA150_ANY_MOTION_DUR_POS 6
+#define BMA150_ANY_MOTION_DUR_MSK 0xC0
+#define BMA150_ANY_MOTION_DUR_REG BMA150_CFG_5_REG
+
+#define BMA150_ANY_MOTION_THRES_REG BMA150_CFG_4_REG
+
+/* Advanced interrupt register fields */
+#define BMA150_ADV_INT_EN_POS 6
+#define BMA150_ADV_INT_EN_MSK 0x40
+#define BMA150_ADV_INT_EN_REG BMA150_CTRL_3_REG
+
+/* High-G interrupt register fields */
+#define BMA150_HIGH_G_EN_POS 1
+#define BMA150_HIGH_G_EN_MSK 0x02
+#define BMA150_HIGH_G_EN_REG BMA150_CTRL_1_REG
+
+#define BMA150_HIGH_G_HYST_POS 3
+#define BMA150_HIGH_G_HYST_MSK 0x38
+#define BMA150_HIGH_G_HYST_REG BMA150_CFG_5_REG
+
+#define BMA150_HIGH_G_DUR_REG BMA150_CFG_3_REG
+#define BMA150_HIGH_G_THRES_REG BMA150_CFG_2_REG
+
+/* Low-G interrupt register fields */
+#define BMA150_LOW_G_EN_POS 0
+#define BMA150_LOW_G_EN_MSK 0x01
+#define BMA150_LOW_G_EN_REG BMA150_CTRL_1_REG
+
+#define BMA150_LOW_G_HYST_POS 0
+#define BMA150_LOW_G_HYST_MSK 0x07
+#define BMA150_LOW_G_HYST_REG BMA150_CFG_5_REG
+
+#define BMA150_LOW_G_DUR_REG BMA150_CFG_1_REG
+#define BMA150_LOW_G_THRES_REG BMA150_CFG_0_REG
+
+struct bma150_data {
+ struct i2c_client *client;
+ struct input_polled_dev *input_polled;
+ struct input_dev *input;
+ u8 mode;
+};
+
+/*
+ * The settings for the given range, bandwidth and interrupt features
+ * are stated and verified by Bosch Sensortec where they are configured
+ * to provide a generic sensitivity performance.
+ */
+static struct bma150_cfg default_cfg __devinitdata = {
+ .any_motion_int = 1,
+ .hg_int = 1,
+ .lg_int = 1,
+ .any_motion_dur = 0,
+ .any_motion_thres = 0,
+ .hg_hyst = 0,
+ .hg_dur = 150,
+ .hg_thres = 160,
+ .lg_hyst = 0,
+ .lg_dur = 150,
+ .lg_thres = 20,
+ .range = BMA150_RANGE_2G,
+ .bandwidth = BMA150_BW_50HZ
+};
+
+static int bma150_write_byte(struct i2c_client *client, u8 reg, u8 val)
+{
+ s32 ret;
+
+ /* As per specification, disable irq in between register writes */
+ if (client->irq)
+ disable_irq_nosync(client->irq);
+
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (client->irq)
+ enable_irq(client->irq);
+
+ return ret;
+}
+
+static int bma150_set_reg_bits(struct i2c_client *client,
+ int val, int shift, u8 mask, u8 reg)
+{
+ int data;
+
+ data = i2c_smbus_read_byte_data(client, reg);
+ if (data < 0)
+ return data;
+
+ data = (data & ~mask) | ((val << shift) & mask);
+ return bma150_write_byte(client, reg, data);
+}
+
+static int bma150_set_mode(struct bma150_data *bma150, u8 mode)
+{
+ int error;
+
+ error = bma150_set_reg_bits(bma150->client, mode, BMA150_WAKE_UP_POS,
+ BMA150_WAKE_UP_MSK, BMA150_WAKE_UP_REG);
+ if (error)
+ return error;
+
+ error = bma150_set_reg_bits(bma150->client, mode, BMA150_SLEEP_POS,
+ BMA150_SLEEP_MSK, BMA150_SLEEP_REG);
+ if (error)
+ return error;
+
+ if (mode == BMA150_MODE_NORMAL)
+ msleep(2);
+
+ bma150->mode = mode;
+ return 0;
+}
+
+static int __devinit bma150_soft_reset(struct bma150_data *bma150)
+{
+ int error;
+
+ error = bma150_set_reg_bits(bma150->client, 1, BMA150_SW_RES_POS,
+ BMA150_SW_RES_MSK, BMA150_SW_RES_REG);
+ if (error)
+ return error;
+
+ msleep(2);
+ return 0;
+}
+
+static int __devinit bma150_set_range(struct bma150_data *bma150, u8 range)
+{
+ return bma150_set_reg_bits(bma150->client, range, BMA150_RANGE_POS,
+ BMA150_RANGE_MSK, BMA150_RANGE_REG);
+}
+
+static int __devinit bma150_set_bandwidth(struct bma150_data *bma150, u8 bw)
+{
+ return bma150_set_reg_bits(bma150->client, bw, BMA150_BANDWIDTH_POS,
+ BMA150_BANDWIDTH_MSK, BMA150_BANDWIDTH_REG);
+}
+
+static int __devinit bma150_set_low_g_interrupt(struct bma150_data *bma150,
+ u8 enable, u8 hyst, u8 dur, u8 thres)
+{
+ int error;
+
+ error = bma150_set_reg_bits(bma150->client, hyst,
+ BMA150_LOW_G_HYST_POS, BMA150_LOW_G_HYST_MSK,
+ BMA150_LOW_G_HYST_REG);
+ if (error)
+ return error;
+
+ error = bma150_write_byte(bma150->client, BMA150_LOW_G_DUR_REG, dur);
+ if (error)
+ return error;
+
+ error = bma150_write_byte(bma150->client, BMA150_LOW_G_THRES_REG, thres);
+ if (error)
+ return error;
+
+ return bma150_set_reg_bits(bma150->client, !!enable,
+ BMA150_LOW_G_EN_POS, BMA150_LOW_G_EN_MSK,
+ BMA150_LOW_G_EN_REG);
+}
+
+static int __devinit bma150_set_high_g_interrupt(struct bma150_data *bma150,
+ u8 enable, u8 hyst, u8 dur, u8 thres)
+{
+ int error;
+
+ error = bma150_set_reg_bits(bma150->client, hyst,
+ BMA150_HIGH_G_HYST_POS, BMA150_HIGH_G_HYST_MSK,
+ BMA150_HIGH_G_HYST_REG);
+ if (error)
+ return error;
+
+ error = bma150_write_byte(bma150->client,
+ BMA150_HIGH_G_DUR_REG, dur);
+ if (error)
+ return error;
+
+ error = bma150_write_byte(bma150->client,
+ BMA150_HIGH_G_THRES_REG, thres);
+ if (error)
+ return error;
+
+ return bma150_set_reg_bits(bma150->client, !!enable,
+ BMA150_HIGH_G_EN_POS, BMA150_HIGH_G_EN_MSK,
+ BMA150_HIGH_G_EN_REG);
+}
+
+
+static int __devinit bma150_set_any_motion_interrupt(struct bma150_data *bma150,
+ u8 enable, u8 dur, u8 thres)
+{
+ int error;
+
+ error = bma150_set_reg_bits(bma150->client, dur,
+ BMA150_ANY_MOTION_DUR_POS,
+ BMA150_ANY_MOTION_DUR_MSK,
+ BMA150_ANY_MOTION_DUR_REG);
+ if (error)
+ return error;
+
+ error = bma150_write_byte(bma150->client,
+ BMA150_ANY_MOTION_THRES_REG, thres);
+ if (error)
+ return error;
+
+ error = bma150_set_reg_bits(bma150->client, !!enable,
+ BMA150_ADV_INT_EN_POS, BMA150_ADV_INT_EN_MSK,
+ BMA150_ADV_INT_EN_REG);
+ if (error)
+ return error;
+
+ return bma150_set_reg_bits(bma150->client, !!enable,
+ BMA150_ANY_MOTION_EN_POS,
+ BMA150_ANY_MOTION_EN_MSK,
+ BMA150_ANY_MOTION_EN_REG);
+}
+
+static void bma150_report_xyz(struct bma150_data *bma150)
+{
+ u8 data[BMA150_XYZ_DATA_SIZE];
+ s16 x, y, z;
+ s32 ret;
+
+ ret = i2c_smbus_read_i2c_block_data(bma150->client,
+ BMA150_ACC_X_LSB_REG, BMA150_XYZ_DATA_SIZE, data);
+ if (ret != BMA150_XYZ_DATA_SIZE)
+ return;
+
+ x = ((0xc0 & data[0]) >> 6) | (data[1] << 2);
+ y = ((0xc0 & data[2]) >> 6) | (data[3] << 2);
+ z = ((0xc0 & data[4]) >> 6) | (data[5] << 2);
+
+ /* sign extension */
+ x = (s16) (x << 6) >> 6;
+ y = (s16) (y << 6) >> 6;
+ z = (s16) (z << 6) >> 6;
+
+ input_report_abs(bma150->input, ABS_X, x);
+ input_report_abs(bma150->input, ABS_Y, y);
+ input_report_abs(bma150->input, ABS_Z, z);
+ input_sync(bma150->input);
+}
+
+static irqreturn_t bma150_irq_thread(int irq, void *dev)
+{
+ bma150_report_xyz(dev);
+
+ return IRQ_HANDLED;
+}
+
+static void bma150_poll(struct input_polled_dev *dev)
+{
+ bma150_report_xyz(dev->private);
+}
+
+static int bma150_open(struct bma150_data *bma150)
+{
+ int error;
+
+ error = pm_runtime_get_sync(&bma150->client->dev);
+ if (error && error != -ENOSYS)
+ return error;
+
+ /*
+ * See if runtime PM woke up the device. If runtime PM
+ * is disabled we need to do it ourselves.
+ */
+ if (bma150->mode != BMA150_MODE_NORMAL) {
+ error = bma150_set_mode(bma150, BMA150_MODE_NORMAL);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static void bma150_close(struct bma150_data *bma150)
+{
+ pm_runtime_put_sync(&bma150->client->dev);
+
+ if (bma150->mode != BMA150_MODE_SLEEP)
+ bma150_set_mode(bma150, BMA150_MODE_SLEEP);
+}
+
+static int bma150_irq_open(struct input_dev *input)
+{
+ struct bma150_data *bma150 = input_get_drvdata(input);
+
+ return bma150_open(bma150);
+}
+
+static void bma150_irq_close(struct input_dev *input)
+{
+ struct bma150_data *bma150 = input_get_drvdata(input);
+
+ bma150_close(bma150);
+}
+
+static void bma150_poll_open(struct input_polled_dev *ipoll_dev)
+{
+ struct bma150_data *bma150 = ipoll_dev->private;
+
+ bma150_open(bma150);
+}
+
+static void bma150_poll_close(struct input_polled_dev *ipoll_dev)
+{
+ struct bma150_data *bma150 = ipoll_dev->private;
+
+ bma150_close(bma150);
+}
+
+static int __devinit bma150_initialize(struct bma150_data *bma150,
+ const struct bma150_cfg *cfg)
+{
+ int error;
+
+ error = bma150_soft_reset(bma150);
+ if (error)
+ return error;
+
+ error = bma150_set_bandwidth(bma150, cfg->bandwidth);
+ if (error)
+ return error;
+
+ error = bma150_set_range(bma150, cfg->range);
+ if (error)
+ return error;
+
+ if (bma150->client->irq) {
+ error = bma150_set_any_motion_interrupt(bma150,
+ cfg->any_motion_int,
+ cfg->any_motion_dur,
+ cfg->any_motion_thres);
+ if (error)
+ return error;
+
+ error = bma150_set_high_g_interrupt(bma150,
+ cfg->hg_int, cfg->hg_hyst,
+ cfg->hg_dur, cfg->hg_thres);
+ if (error)
+ return error;
+
+ error = bma150_set_low_g_interrupt(bma150,
+ cfg->lg_int, cfg->lg_hyst,
+ cfg->lg_dur, cfg->lg_thres);
+ if (error)
+ return error;
+ }
+
+ return bma150_set_mode(bma150, BMA150_MODE_SLEEP);
+}
+
+static void __devinit bma150_init_input_device(struct bma150_data *bma150,
+ struct input_dev *idev)
+{
+ idev->name = BMA150_DRIVER;
+ idev->phys = BMA150_DRIVER "/input0";
+ idev->id.bustype = BUS_I2C;
+ idev->dev.parent = &bma150->client->dev;
+
+ idev->evbit[0] = BIT_MASK(EV_ABS);
+ input_set_abs_params(idev, ABS_X, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
+ input_set_abs_params(idev, ABS_Y, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
+ input_set_abs_params(idev, ABS_Z, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
+}
+
+static int __devinit bma150_register_input_device(struct bma150_data *bma150)
+{
+ struct input_dev *idev;
+ int error;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ bma150_init_input_device(bma150, idev);
+
+ idev->open = bma150_irq_open;
+ idev->close = bma150_irq_close;
+ input_set_drvdata(idev, bma150);
+
+ error = input_register_device(idev);
+ if (error) {
+ input_free_device(idev);
+ return error;
+ }
+
+ bma150->input = idev;
+ return 0;
+}
+
+static int __devinit bma150_register_polled_device(struct bma150_data *bma150)
+{
+ struct input_polled_dev *ipoll_dev;
+ int error;
+
+ ipoll_dev = input_allocate_polled_device();
+ if (!ipoll_dev)
+ return -ENOMEM;
+
+ ipoll_dev->private = bma150;
+ ipoll_dev->open = bma150_poll_open;
+ ipoll_dev->close = bma150_poll_close;
+ ipoll_dev->poll = bma150_poll;
+ ipoll_dev->poll_interval = BMA150_POLL_INTERVAL;
+ ipoll_dev->poll_interval_min = BMA150_POLL_MIN;
+ ipoll_dev->poll_interval_max = BMA150_POLL_MAX;
+
+ bma150_init_input_device(bma150, ipoll_dev->input);
+
+ error = input_register_polled_device(ipoll_dev);
+ if (error) {
+ input_free_polled_device(ipoll_dev);
+ return error;
+ }
+
+ bma150->input_polled = ipoll_dev;
+ bma150->input = ipoll_dev->input;
+
+ return 0;
+}
+
+static int __devinit bma150_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct bma150_platform_data *pdata = client->dev.platform_data;
+ const struct bma150_cfg *cfg;
+ struct bma150_data *bma150;
+ int chip_id;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c_check_functionality error\n");
+ return -EIO;
+ }
+
+ chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG);
+ if (chip_id != BMA150_CHIP_ID) {
+ dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id);
+ return -EINVAL;
+ }
+
+ bma150 = kzalloc(sizeof(struct bma150_data), GFP_KERNEL);
+ if (!bma150)
+ return -ENOMEM;
+
+ bma150->client = client;
+
+ if (pdata) {
+ if (pdata->irq_gpio_cfg) {
+ error = pdata->irq_gpio_cfg();
+ if (error) {
+ dev_err(&client->dev,
+ "IRQ GPIO conf. error %d, error %d\n",
+ client->irq, error);
+ goto err_free_mem;
+ }
+ }
+ cfg = &pdata->cfg;
+ } else {
+ cfg = &default_cfg;
+ }
+
+ error = bma150_initialize(bma150, cfg);
+ if (error)
+ goto err_free_mem;
+
+ if (client->irq > 0) {
+ error = bma150_register_input_device(bma150);
+ if (error)
+ goto err_free_mem;
+
+ error = request_threaded_irq(client->irq,
+ NULL, bma150_irq_thread,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ BMA150_DRIVER, bma150);
+ if (error) {
+ dev_err(&client->dev,
+ "irq request failed %d, error %d\n",
+ client->irq, error);
+ input_unregister_device(bma150->input);
+ goto err_free_mem;
+ }
+ } else {
+ error = bma150_register_polled_device(bma150);
+ if (error)
+ goto err_free_mem;
+ }
+
+ i2c_set_clientdata(client, bma150);
+
+ pm_runtime_enable(&client->dev);
+
+ return 0;
+
+err_free_mem:
+ kfree(bma150);
+ return error;
+}
+
+static int __devexit bma150_remove(struct i2c_client *client)
+{
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ pm_runtime_disable(&client->dev);
+
+ if (client->irq > 0) {
+ free_irq(client->irq, bma150);
+ input_unregister_device(bma150->input);
+ } else {
+ input_unregister_polled_device(bma150->input_polled);
+ input_free_polled_device(bma150->input_polled);
+ }
+
+ kfree(bma150);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bma150_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ return bma150_set_mode(bma150, BMA150_MODE_SLEEP);
+}
+
+static int bma150_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ return bma150_set_mode(bma150, BMA150_MODE_NORMAL);
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL);
+
+static const struct i2c_device_id bma150_id[] = {
+ { "bma150", 0 },
+ { "smb380", 0 },
+ { "bma023", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, bma150_id);
+
+static struct i2c_driver bma150_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = BMA150_DRIVER,
+ .pm = &bma150_pm,
+ },
+ .class = I2C_CLASS_HWMON,
+ .id_table = bma150_id,
+ .probe = bma150_probe,
+ .remove = __devexit_p(bma150_remove),
+};
+
+static int __init BMA150_init(void)
+{
+ return i2c_add_driver(&bma150_driver);
+}
+
+static void __exit BMA150_exit(void)
+{
+ i2c_del_driver(&bma150_driver);
+}
+
+MODULE_AUTHOR("Albert Zhang <xu.zhang@bosch-sensortec.com>");
+MODULE_DESCRIPTION("BMA150 driver");
+MODULE_LICENSE("GPL");
+
+module_init(BMA150_init);
+module_exit(BMA150_exit);
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 1f38302..302ab46 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -111,7 +111,7 @@
input_dev->event = ixp4xx_spkr_event;
err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
- IRQF_DISABLED | IRQF_NO_SUSPEND, "ixp4xx-beeper",
+ IRQF_NO_SUSPEND, "ixp4xx-beeper",
(void *) dev->id);
if (err)
goto err_free_device;
diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
new file mode 100644
index 0000000..09b0522
--- /dev/null
+++ b/drivers/input/misc/mc13783-pwrbutton.c
@@ -0,0 +1,282 @@
+/**
+ * Copyright (C) 2011 Philippe Rétornaz
+ *
+ * Based on twl4030-pwrbutton driver by:
+ * Peter De Schrijver <peter.de-schrijver@nokia.com>
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+struct mc13783_pwrb {
+ struct input_dev *pwr;
+ struct mc13xxx *mc13783;
+#define MC13783_PWRB_B1_POL_INVERT (1 << 0)
+#define MC13783_PWRB_B2_POL_INVERT (1 << 1)
+#define MC13783_PWRB_B3_POL_INVERT (1 << 2)
+ int flags;
+ unsigned short keymap[3];
+};
+
+#define MC13783_REG_INTERRUPT_SENSE_1 5
+#define MC13783_IRQSENSE1_ONOFD1S (1 << 3)
+#define MC13783_IRQSENSE1_ONOFD2S (1 << 4)
+#define MC13783_IRQSENSE1_ONOFD3S (1 << 5)
+
+#define MC13783_REG_POWER_CONTROL_2 15
+#define MC13783_POWER_CONTROL_2_ON1BDBNC 4
+#define MC13783_POWER_CONTROL_2_ON2BDBNC 6
+#define MC13783_POWER_CONTROL_2_ON3BDBNC 8
+#define MC13783_POWER_CONTROL_2_ON1BRSTEN (1 << 1)
+#define MC13783_POWER_CONTROL_2_ON2BRSTEN (1 << 2)
+#define MC13783_POWER_CONTROL_2_ON3BRSTEN (1 << 3)
+
+static irqreturn_t button_irq(int irq, void *_priv)
+{
+ struct mc13783_pwrb *priv = _priv;
+ int val;
+
+ mc13xxx_irq_ack(priv->mc13783, irq);
+ mc13xxx_reg_read(priv->mc13783, MC13783_REG_INTERRUPT_SENSE_1, &val);
+
+ switch (irq) {
+ case MC13783_IRQ_ONOFD1:
+ val = val & MC13783_IRQSENSE1_ONOFD1S ? 1 : 0;
+ if (priv->flags & MC13783_PWRB_B1_POL_INVERT)
+ val ^= 1;
+ input_report_key(priv->pwr, priv->keymap[0], val);
+ break;
+
+ case MC13783_IRQ_ONOFD2:
+ val = val & MC13783_IRQSENSE1_ONOFD2S ? 1 : 0;
+ if (priv->flags & MC13783_PWRB_B2_POL_INVERT)
+ val ^= 1;
+ input_report_key(priv->pwr, priv->keymap[1], val);
+ break;
+
+ case MC13783_IRQ_ONOFD3:
+ val = val & MC13783_IRQSENSE1_ONOFD3S ? 1 : 0;
+ if (priv->flags & MC13783_PWRB_B3_POL_INVERT)
+ val ^= 1;
+ input_report_key(priv->pwr, priv->keymap[2], val);
+ break;
+ }
+
+ input_sync(priv->pwr);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit mc13783_pwrbutton_probe(struct platform_device *pdev)
+{
+ const struct mc13xxx_buttons_platform_data *pdata;
+ struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
+ struct input_dev *pwr;
+ struct mc13783_pwrb *priv;
+ int err = 0;
+ int reg = 0;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ pwr = input_allocate_device();
+ if (!pwr) {
+ dev_dbg(&pdev->dev, "Can't allocate power button\n");
+ return -ENOMEM;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ err = -ENOMEM;
+ dev_dbg(&pdev->dev, "Can't allocate power button\n");
+ goto free_input_dev;
+ }
+
+ reg |= (pdata->b1on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON1BDBNC;
+ reg |= (pdata->b2on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON2BDBNC;
+ reg |= (pdata->b3on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON3BDBNC;
+
+ priv->pwr = pwr;
+ priv->mc13783 = mc13783;
+
+ mc13xxx_lock(mc13783);
+
+ if (pdata->b1on_flags & MC13783_BUTTON_ENABLE) {
+ priv->keymap[0] = pdata->b1on_key;
+ if (pdata->b1on_key != KEY_RESERVED)
+ __set_bit(pdata->b1on_key, pwr->keybit);
+
+ if (pdata->b1on_flags & MC13783_BUTTON_POL_INVERT)
+ priv->flags |= MC13783_PWRB_B1_POL_INVERT;
+
+ if (pdata->b1on_flags & MC13783_BUTTON_RESET_EN)
+ reg |= MC13783_POWER_CONTROL_2_ON1BRSTEN;
+
+ err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD1,
+ button_irq, "b1on", priv);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't request irq\n");
+ goto free_priv;
+ }
+ }
+
+ if (pdata->b2on_flags & MC13783_BUTTON_ENABLE) {
+ priv->keymap[1] = pdata->b2on_key;
+ if (pdata->b2on_key != KEY_RESERVED)
+ __set_bit(pdata->b2on_key, pwr->keybit);
+
+ if (pdata->b2on_flags & MC13783_BUTTON_POL_INVERT)
+ priv->flags |= MC13783_PWRB_B2_POL_INVERT;
+
+ if (pdata->b2on_flags & MC13783_BUTTON_RESET_EN)
+ reg |= MC13783_POWER_CONTROL_2_ON2BRSTEN;
+
+ err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD2,
+ button_irq, "b2on", priv);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't request irq\n");
+ goto free_irq_b1;
+ }
+ }
+
+ if (pdata->b3on_flags & MC13783_BUTTON_ENABLE) {
+ priv->keymap[2] = pdata->b3on_key;
+ if (pdata->b3on_key != KEY_RESERVED)
+ __set_bit(pdata->b3on_key, pwr->keybit);
+
+ if (pdata->b3on_flags & MC13783_BUTTON_POL_INVERT)
+ priv->flags |= MC13783_PWRB_B3_POL_INVERT;
+
+ if (pdata->b3on_flags & MC13783_BUTTON_RESET_EN)
+ reg |= MC13783_POWER_CONTROL_2_ON3BRSTEN;
+
+ err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD3,
+ button_irq, "b3on", priv);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't request irq: %d\n", err);
+ goto free_irq_b2;
+ }
+ }
+
+ mc13xxx_reg_rmw(mc13783, MC13783_REG_POWER_CONTROL_2, 0x3FE, reg);
+
+ mc13xxx_unlock(mc13783);
+
+ pwr->name = "mc13783_pwrbutton";
+ pwr->phys = "mc13783_pwrbutton/input0";
+ pwr->dev.parent = &pdev->dev;
+
+ pwr->keycode = priv->keymap;
+ pwr->keycodemax = ARRAY_SIZE(priv->keymap);
+ pwr->keycodesize = sizeof(priv->keymap[0]);
+ __set_bit(EV_KEY, pwr->evbit);
+
+ err = input_register_device(pwr);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't register power button: %d\n", err);
+ goto free_irq;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+
+free_irq:
+ mc13xxx_lock(mc13783);
+
+ if (pdata->b3on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD3, priv);
+
+free_irq_b2:
+ if (pdata->b2on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD2, priv);
+
+free_irq_b1:
+ if (pdata->b1on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD1, priv);
+
+free_priv:
+ mc13xxx_unlock(mc13783);
+ kfree(priv);
+
+free_input_dev:
+ input_free_device(pwr);
+
+ return err;
+}
+
+static int __devexit mc13783_pwrbutton_remove(struct platform_device *pdev)
+{
+ struct mc13783_pwrb *priv = platform_get_drvdata(pdev);
+ const struct mc13xxx_buttons_platform_data *pdata;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ mc13xxx_lock(priv->mc13783);
+
+ if (pdata->b3on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD3, priv);
+ if (pdata->b2on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD2, priv);
+ if (pdata->b1on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD1, priv);
+
+ mc13xxx_unlock(priv->mc13783);
+
+ input_unregister_device(priv->pwr);
+ kfree(priv);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+struct platform_driver mc13783_pwrbutton_driver = {
+ .probe = mc13783_pwrbutton_probe,
+ .remove = __devexit_p(mc13783_pwrbutton_remove),
+ .driver = {
+ .name = "mc13783-pwrbutton",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mc13783_pwrbutton_init(void)
+{
+ return platform_driver_register(&mc13783_pwrbutton_driver);
+}
+module_init(mc13783_pwrbutton_init);
+
+static void __exit mc13783_pwrbutton_exit(void)
+{
+ platform_driver_unregister(&mc13783_pwrbutton_driver);
+}
+module_exit(mc13783_pwrbutton_exit);
+
+MODULE_ALIAS("platform:mc13783-pwrbutton");
+MODULE_DESCRIPTION("MC13783 Power Button");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Philippe Retornaz");
diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c
index 0794778..4d60080 100644
--- a/drivers/input/misc/mma8450.c
+++ b/drivers/input/misc/mma8450.c
@@ -88,13 +88,13 @@
return 0;
}
-static int mma8450_read_xyz(struct mma8450 *m, int *x, int *y, int *z)
+static int mma8450_read_block(struct mma8450 *m, unsigned off,
+ u8 *buf, size_t size)
{
struct i2c_client *c = m->client;
- u8 buff[6];
int err;
- err = i2c_smbus_read_i2c_block_data(c, MMA8450_OUT_X_LSB, 6, buff);
+ err = i2c_smbus_read_i2c_block_data(c, off, size, buf);
if (err < 0) {
dev_err(&c->dev,
"failed to read block data at 0x%02x, error %d\n",
@@ -102,10 +102,6 @@
return err;
}
- *x = ((buff[1] << 4) & 0xff0) | (buff[0] & 0xf);
- *y = ((buff[3] << 4) & 0xff0) | (buff[2] & 0xf);
- *z = ((buff[5] << 4) & 0xff0) | (buff[4] & 0xf);
-
return 0;
}
@@ -114,7 +110,7 @@
struct mma8450 *m = dev->private;
int x, y, z;
int ret;
- int err;
+ u8 buf[6];
ret = mma8450_read(m, MMA8450_STATUS);
if (ret < 0)
@@ -123,10 +119,14 @@
if (!(ret & MMA8450_STATUS_ZXYDR))
return;
- err = mma8450_read_xyz(m, &x, &y, &z);
- if (err)
+ ret = mma8450_read_block(m, MMA8450_OUT_X_LSB, buf, sizeof(buf));
+ if (ret < 0)
return;
+ x = ((buf[1] << 4) & 0xff0) | (buf[0] & 0xf);
+ y = ((buf[3] << 4) & 0xff0) | (buf[2] & 0xf);
+ z = ((buf[5] << 4) & 0xff0) | (buf[4] & 0xf);
+
input_report_abs(dev->input, ABS_X, x);
input_report_abs(dev->input, ABS_Y, y);
input_report_abs(dev->input, ABS_Z, z);
diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
new file mode 100644
index 0000000..4319293
--- /dev/null
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -0,0 +1,296 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/mfd/pm8xxx/core.h>
+
+#define VIB_DRV 0x4A
+
+#define VIB_DRV_SEL_MASK 0xf8
+#define VIB_DRV_SEL_SHIFT 0x03
+#define VIB_DRV_EN_MANUAL_MASK 0xfc
+
+#define VIB_MAX_LEVEL_mV (3100)
+#define VIB_MIN_LEVEL_mV (1200)
+#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
+
+#define MAX_FF_SPEED 0xff
+
+/**
+ * struct pm8xxx_vib - structure to hold vibrator data
+ * @vib_input_dev: input device supporting force feedback
+ * @work: work structure to set the vibration parameters
+ * @dev: device supporting force feedback
+ * @speed: speed of vibration set from userland
+ * @active: state of vibrator
+ * @level: level of vibration to set in the chip
+ * @reg_vib_drv: VIB_DRV register value
+ */
+struct pm8xxx_vib {
+ struct input_dev *vib_input_dev;
+ struct work_struct work;
+ struct device *dev;
+ int speed;
+ int level;
+ bool active;
+ u8 reg_vib_drv;
+};
+
+/**
+ * pm8xxx_vib_read_u8 - helper to read a byte from pmic chip
+ * @vib: pointer to vibrator structure
+ * @data: placeholder for data to be read
+ * @reg: register address
+ */
+static int pm8xxx_vib_read_u8(struct pm8xxx_vib *vib,
+ u8 *data, u16 reg)
+{
+ int rc;
+
+ rc = pm8xxx_readb(vib->dev->parent, reg, data);
+ if (rc < 0)
+ dev_warn(vib->dev, "Error reading pm8xxx reg 0x%x(0x%x)\n",
+ reg, rc);
+ return rc;
+}
+
+/**
+ * pm8xxx_vib_write_u8 - helper to write a byte to pmic chip
+ * @vib: pointer to vibrator structure
+ * @data: data to write
+ * @reg: register address
+ */
+static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib,
+ u8 data, u16 reg)
+{
+ int rc;
+
+ rc = pm8xxx_writeb(vib->dev->parent, reg, data);
+ if (rc < 0)
+ dev_warn(vib->dev, "Error writing pm8xxx reg 0x%x(0x%x)\n",
+ reg, rc);
+ return rc;
+}
+
+/**
+ * pm8xxx_vib_set - handler to start/stop vibration
+ * @vib: pointer to vibrator structure
+ * @on: state to set
+ */
+static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
+{
+ int rc;
+ u8 val = vib->reg_vib_drv;
+
+ if (on)
+ val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
+ else
+ val &= ~VIB_DRV_SEL_MASK;
+
+ rc = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
+ if (rc < 0)
+ return rc;
+
+ vib->reg_vib_drv = val;
+ return 0;
+}
+
+/**
+ * pm8xxx_work_handler - worker to set vibration level
+ * @work: pointer to work_struct
+ */
+static void pm8xxx_work_handler(struct work_struct *work)
+{
+ struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
+ int rc;
+ u8 val;
+
+ rc = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
+ if (rc < 0)
+ return;
+
+ /*
+ * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
+ * scale the level to fit into these ranges.
+ */
+ if (vib->speed) {
+ vib->active = true;
+ vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
+ VIB_MIN_LEVEL_mV;
+ vib->level /= 100;
+ } else {
+ vib->active = false;
+ vib->level = VIB_MIN_LEVEL_mV / 100;
+ }
+
+ pm8xxx_vib_set(vib, vib->active);
+}
+
+/**
+ * pm8xxx_vib_close - callback of input close callback
+ * @dev: input device pointer
+ *
+ * Turns off the vibrator.
+ */
+static void pm8xxx_vib_close(struct input_dev *dev)
+{
+ struct pm8xxx_vib *vib = input_get_drvdata(dev);
+
+ cancel_work_sync(&vib->work);
+ if (vib->active)
+ pm8xxx_vib_set(vib, false);
+}
+
+/**
+ * pm8xxx_vib_play_effect - function to handle vib effects.
+ * @dev: input device pointer
+ * @data: data of effect
+ * @effect: effect to play
+ *
+ * Currently this driver supports only rumble effects.
+ */
+static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct pm8xxx_vib *vib = input_get_drvdata(dev);
+
+ vib->speed = effect->u.rumble.strong_magnitude >> 8;
+ if (!vib->speed)
+ vib->speed = effect->u.rumble.weak_magnitude >> 9;
+
+ schedule_work(&vib->work);
+
+ return 0;
+}
+
+static int __devinit pm8xxx_vib_probe(struct platform_device *pdev)
+
+{
+ struct pm8xxx_vib *vib;
+ struct input_dev *input_dev;
+ int error;
+ u8 val;
+
+ vib = kzalloc(sizeof(*vib), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!vib || !input_dev) {
+ dev_err(&pdev->dev, "couldn't allocate memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ INIT_WORK(&vib->work, pm8xxx_work_handler);
+ vib->dev = &pdev->dev;
+ vib->vib_input_dev = input_dev;
+
+ /* operate in manual mode */
+ error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
+ if (error < 0)
+ goto err_free_mem;
+ val &= ~VIB_DRV_EN_MANUAL_MASK;
+ error = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
+ if (error < 0)
+ goto err_free_mem;
+
+ vib->reg_vib_drv = val;
+
+ input_dev->name = "pm8xxx_vib_ffmemless";
+ input_dev->id.version = 1;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->close = pm8xxx_vib_close;
+ input_set_drvdata(input_dev, vib);
+ input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);
+
+ error = input_ff_create_memless(input_dev, NULL,
+ pm8xxx_vib_play_effect);
+ if (error) {
+ dev_err(&pdev->dev,
+ "couldn't register vibrator as FF device\n");
+ goto err_free_mem;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "couldn't register input device\n");
+ goto err_destroy_memless;
+ }
+
+ platform_set_drvdata(pdev, vib);
+ return 0;
+
+err_destroy_memless:
+ input_ff_destroy(input_dev);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(vib);
+
+ return error;
+}
+
+static int __devexit pm8xxx_vib_remove(struct platform_device *pdev)
+{
+ struct pm8xxx_vib *vib = platform_get_drvdata(pdev);
+
+ input_unregister_device(vib->vib_input_dev);
+ kfree(vib);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm8xxx_vib_suspend(struct device *dev)
+{
+ struct pm8xxx_vib *vib = dev_get_drvdata(dev);
+
+ /* Turn off the vibrator */
+ pm8xxx_vib_set(vib, false);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
+
+static struct platform_driver pm8xxx_vib_driver = {
+ .probe = pm8xxx_vib_probe,
+ .remove = __devexit_p(pm8xxx_vib_remove),
+ .driver = {
+ .name = "pm8xxx-vib",
+ .owner = THIS_MODULE,
+ .pm = &pm8xxx_vib_pm_ops,
+ },
+};
+
+static int __init pm8xxx_vib_init(void)
+{
+ return platform_driver_register(&pm8xxx_vib_driver);
+}
+module_init(pm8xxx_vib_init);
+
+static void __exit pm8xxx_vib_exit(void)
+{
+ platform_driver_unregister(&pm8xxx_vib_driver);
+}
+module_exit(pm8xxx_vib_exit);
+
+MODULE_ALIAS("platform:pm8xxx_vib");
+MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Amy Maloche <amaloche@codeaurora.org>");
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index c43002e..ad153a4 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -74,12 +74,12 @@
if (status & TWL6040_VIBLOCDET) {
dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
- TWL6040_VIBENAL);
+ TWL6040_VIBENA);
}
if (status & TWL6040_VIBROCDET) {
dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
- TWL6040_VIBENAR);
+ TWL6040_VIBENA);
}
return IRQ_HANDLED;
@@ -97,23 +97,23 @@
}
twl6040_power(info->twl6040, 1);
- if (twl6040->rev <= TWL6040_REV_ES1_1) {
+ if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
/*
* ERRATA: Disable overcurrent protection for at least
* 3ms when enabling vibrator drivers to avoid false
* overcurrent detection
*/
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
- TWL6040_VIBENAL | TWL6040_VIBCTRLL);
+ TWL6040_VIBENA | TWL6040_VIBCTRL);
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
- TWL6040_VIBENAR | TWL6040_VIBCTRLR);
+ TWL6040_VIBENA | TWL6040_VIBCTRL);
usleep_range(3000, 3500);
}
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
- TWL6040_VIBENAL);
+ TWL6040_VIBENA);
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
- TWL6040_VIBENAR);
+ TWL6040_VIBENA);
info->enabled = true;
}
@@ -201,6 +201,13 @@
struct vibra_info *info = input_get_drvdata(input);
int ret;
+ /* Do not allow effect, while the routing is set to use audio */
+ ret = twl6040_get_vibralr_status(info->twl6040);
+ if (ret & TWL6040_VIBSEL) {
+ dev_info(&input->dev, "Vibra is configured for audio\n");
+ return -EBUSY;
+ }
+
info->weak_speed = effect->u.rumble.weak_magnitude;
info->strong_speed = effect->u.rumble.strong_magnitude;
info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
@@ -228,7 +235,7 @@
mutex_unlock(&info->mutex);
}
-#if CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_SLEEP
static int twl6040_vibra_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 99d5876..003587c 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -23,13 +23,6 @@
#include "psmouse.h"
#include "alps.h"
-#undef DEBUG
-#ifdef DEBUG
-#define dbg(format, arg...) printk(KERN_INFO "alps.c: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while (0)
-#endif
-
#define ALPS_OLDPROTO 0x01 /* old style input */
#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
#define ALPS_PASS 0x04 /* device has a pass-through port */
@@ -297,10 +290,10 @@
psmouse->packet[4] |
psmouse->packet[5]) & 0x80) ||
(!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
- dbg("refusing packet %x %x %x %x "
- "(suspected interleaved ps/2)\n",
- psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5], psmouse->packet[6]);
+ psmouse_dbg(psmouse,
+ "refusing packet %x %x %x %x (suspected interleaved ps/2)\n",
+ psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5], psmouse->packet[6]);
return PSMOUSE_BAD_DATA;
}
@@ -319,13 +312,13 @@
* There is also possibility that we got 6-byte ALPS
* packet followed by 3-byte packet from trackpoint. We
* can not distinguish between these 2 scenarios but
- * becase the latter is unlikely to happen in course of
+ * because the latter is unlikely to happen in course of
* normal operation (user would need to press all
* buttons on the pad and start moving trackpoint
* without touching the pad surface) we assume former.
* Even if we are wrong the wost thing that would happen
* the cursor would jump but we should not get protocol
- * desynchronization.
+ * de-synchronization.
*/
alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
@@ -361,10 +354,10 @@
if ((psmouse->packet[3] |
psmouse->packet[4] |
psmouse->packet[5]) & 0x80) {
- dbg("refusing packet %x %x %x "
- "(suspected interleaved ps/2)\n",
- psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5]);
+ psmouse_dbg(psmouse,
+ "refusing packet %x %x %x (suspected interleaved ps/2)\n",
+ psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5]);
} else {
alps_process_packet(psmouse);
}
@@ -396,16 +389,18 @@
}
if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
- dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
- psmouse->packet[0], model->mask0, model->byte0);
+ psmouse_dbg(psmouse,
+ "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
+ psmouse->packet[0], model->mask0, model->byte0);
return PSMOUSE_BAD_DATA;
}
/* Bytes 2 - 6 should have 0 in the highest bit */
if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
- dbg("refusing packet[%i] = %x\n",
- psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]);
+ psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
+ psmouse->pktcnt - 1,
+ psmouse->packet[psmouse->pktcnt - 1]);
return PSMOUSE_BAD_DATA;
}
@@ -439,7 +434,8 @@
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
return NULL;
- dbg("E6 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
+ psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
+ param[0], param[1], param[2]);
if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100))
return NULL;
@@ -459,7 +455,8 @@
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
return NULL;
- dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
+ psmouse_dbg(psmouse, "E7 report: %2.2x %2.2x %2.2x",
+ param[0], param[1], param[2]);
if (version) {
for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
@@ -527,7 +524,8 @@
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
return -1;
- dbg("Status: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
+ psmouse_dbg(psmouse, "Status: %2.2x %2.2x %2.2x",
+ param[0], param[1], param[2]);
return 0;
}
@@ -605,12 +603,12 @@
}
if (alps_tap_mode(psmouse, true)) {
- printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
+ psmouse_warn(psmouse, "Failed to enable hardware tapping\n");
return -1;
}
if (alps_absolute_mode(psmouse)) {
- printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
+ psmouse_err(psmouse, "Failed to enable absolute mode\n");
return -1;
}
@@ -621,7 +619,7 @@
/* ALPS needs stream mode, otherwise it won't report any data */
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
- printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
+ psmouse_err(psmouse, "Failed to enable stream mode\n");
return -1;
}
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 3250356..09b93b1 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -10,8 +10,6 @@
* Trademarks are the property of their respective owners.
*/
-#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
-
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -25,13 +23,10 @@
#define elantech_debug(fmt, ...) \
do { \
if (etd->debug) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \
+ psmouse_printk(KERN_DEBUG, psmouse, \
+ fmt, ##__VA_ARGS__); \
} while (0)
-static bool force_elantech;
-module_param_named(force_elantech, force_elantech, bool, 0644);
-MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default).");
-
/*
* Send a Synaptics style sliced query command
*/
@@ -40,7 +35,7 @@
{
if (psmouse_sliced_command(psmouse, c) ||
ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
- pr_err("synaptics_send_cmd query 0x%02x failed.\n", c);
+ psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
return -1;
}
@@ -69,7 +64,7 @@
} while (tries > 0);
if (rc)
- pr_err("ps2 command 0x%02x failed.\n", command);
+ psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command);
return rc;
}
@@ -84,7 +79,7 @@
unsigned char param[3];
int rc = 0;
- if (reg < 0x10 || reg > 0x26)
+ if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
@@ -108,12 +103,24 @@
rc = -1;
}
break;
+
+ case 3 ... 4:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
- pr_err("failed to read register 0x%02x.\n", reg);
- else
+ psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg);
+ else if (etd->hw_version != 4)
*val = param[0];
+ else
+ *val = param[1];
return rc;
}
@@ -127,7 +134,7 @@
struct elantech_data *etd = psmouse->private;
int rc = 0;
- if (reg < 0x10 || reg > 0x26)
+ if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
@@ -154,11 +161,38 @@
rc = -1;
}
break;
+
+ case 3:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, val) ||
+ elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+ rc = -1;
+ }
+ break;
+
+ case 4:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, val) ||
+ elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
- pr_err("failed to write register 0x%02x with value 0x%02x.\n",
- reg, val);
+ psmouse_err(psmouse,
+ "failed to write register 0x%02x with value 0x%02x.\n",
+ reg, val);
return rc;
}
@@ -166,13 +200,13 @@
/*
* Dump a complete mouse movement packet to the syslog
*/
-static void elantech_packet_dump(unsigned char *packet, int size)
+static void elantech_packet_dump(struct psmouse *psmouse)
{
int i;
- printk(KERN_DEBUG pr_fmt("PS/2 packet ["));
- for (i = 0; i < size; i++)
- printk("%s0x%02x ", (i) ? ", " : " ", packet[i]);
+ psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet [");
+ for (i = 0; i < psmouse->pktsize; i++)
+ printk("%s0x%02x ", i ? ", " : " ", psmouse->packet[i]);
printk("]\n");
}
@@ -223,7 +257,7 @@
input_report_abs(dev, ABS_X,
((packet[1] & 0x0c) << 6) | packet[2]);
input_report_abs(dev, ABS_Y,
- ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
+ etd->y_max - (((packet[1] & 0x03) << 8) | packet[3]));
}
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
@@ -233,7 +267,7 @@
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
if (etd->fw_version < 0x020000 &&
- (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+ (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
/* rocker up */
input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
/* rocker down */
@@ -273,11 +307,11 @@
struct elantech_data *etd = psmouse->private;
struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
- unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0, width = 0, pres = 0;
+ unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ unsigned int width = 0, pres = 0;
/* byte 0: n1 n0 . . . . R L */
fingers = (packet[0] & 0xc0) >> 6;
- input_report_key(dev, BTN_TOUCH, fingers != 0);
switch (fingers) {
case 3:
@@ -290,18 +324,15 @@
/* pass through... */
case 1:
/*
- * byte 1: . . . . . x10 x9 x8
+ * byte 1: . . . . x11 x10 x9 x8
* byte 2: x7 x6 x5 x4 x4 x2 x1 x0
*/
- x1 = ((packet[1] & 0x07) << 8) | packet[2];
+ x1 = ((packet[1] & 0x0f) << 8) | packet[2];
/*
- * byte 4: . . . . . . y9 y8
+ * byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
- y1 = ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]);
-
- input_report_abs(dev, ABS_X, x1);
- input_report_abs(dev, ABS_Y, y1);
+ y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
@@ -314,22 +345,18 @@
* byte 0: . . ay8 ax8 . . . .
* byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
- x1 = ((packet[0] & 0x10) << 4) | packet[1];
+ x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
- y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
+ y1 = etd->y_max -
+ ((((packet[0] & 0x20) << 3) | packet[2]) << 2);
/*
* byte 3: . . by8 bx8 . . . .
* byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
*/
- x2 = ((packet[3] & 0x10) << 4) | packet[4];
+ x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
- y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
- /*
- * For compatibility with the X Synaptics driver scale up
- * one coordinate and report as ordinary mouse movent
- */
- input_report_abs(dev, ABS_X, x1 << 2);
- input_report_abs(dev, ABS_Y, y1 << 2);
+ y2 = etd->y_max -
+ ((((packet[3] & 0x20) << 3) | packet[5]) << 2);
/* Unknown so just report sensible values */
pres = 127;
@@ -337,6 +364,11 @@
break;
}
+ input_report_key(dev, BTN_TOUCH, fingers != 0);
+ if (fingers != 0) {
+ input_report_abs(dev, ABS_X, x1);
+ input_report_abs(dev, ABS_Y, y1);
+ }
elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
@@ -352,7 +384,208 @@
input_sync(dev);
}
-static int elantech_check_parity_v1(struct psmouse *psmouse)
+/*
+ * Interpret complete data packets and report absolute mode input events for
+ * hardware version 3. (12 byte packets for two fingers)
+ */
+static void elantech_report_absolute_v3(struct psmouse *psmouse,
+ int packet_type)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ unsigned int width = 0, pres = 0;
+
+ /* byte 0: n1 n0 . . . . R L */
+ fingers = (packet[0] & 0xc0) >> 6;
+
+ switch (fingers) {
+ case 3:
+ case 1:
+ /*
+ * byte 1: . . . . x11 x10 x9 x8
+ * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
+ */
+ x1 = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . y11 y10 y9 y8
+ * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
+ */
+ y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+
+ case 2:
+ if (packet_type == PACKET_V3_HEAD) {
+ /*
+ * byte 1: . . . . ax11 ax10 ax9 ax8
+ * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+ */
+ etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . ay11 ay10 ay9 ay8
+ * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
+ */
+ etd->mt[0].y = etd->y_max -
+ (((packet[4] & 0x0f) << 8) | packet[5]);
+ /*
+ * wait for next packet
+ */
+ return;
+ }
+
+ /* packet_type == PACKET_V3_TAIL */
+ x1 = etd->mt[0].x;
+ y1 = etd->mt[0].y;
+ x2 = ((packet[1] & 0x0f) << 8) | packet[2];
+ y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+ }
+
+ pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+ width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
+
+ input_report_key(dev, BTN_TOUCH, fingers != 0);
+ if (fingers != 0) {
+ input_report_abs(dev, ABS_X, x1);
+ input_report_abs(dev, ABS_Y, y1);
+ }
+ elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+ input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_report_abs(dev, ABS_PRESSURE, pres);
+ input_report_abs(dev, ABS_TOOL_WIDTH, width);
+
+ input_sync(dev);
+}
+
+static void elantech_input_sync_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ unsigned char *packet = psmouse->packet;
+
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_mt_report_pointer_emulation(dev, true);
+ input_sync(dev);
+}
+
+static void process_packet_status_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ unsigned char *packet = psmouse->packet;
+ unsigned fingers;
+ int i;
+
+ /* notify finger state change */
+ fingers = packet[1] & 0x1f;
+ for (i = 0; i < ETP_MAX_FINGERS; i++) {
+ if ((fingers & (1 << i)) == 0) {
+ input_mt_slot(dev, i);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
+ }
+ }
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void process_packet_head_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ int id = ((packet[3] & 0xe0) >> 5) - 1;
+ int pres, traces;
+
+ if (id < 0)
+ return;
+
+ etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2];
+ etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+ traces = (packet[0] & 0xf0) >> 4;
+
+ input_mt_slot(dev, id);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
+
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
+ input_report_abs(dev, ABS_MT_PRESSURE, pres);
+ input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width);
+ /* report this for backwards compatibility */
+ input_report_abs(dev, ABS_TOOL_WIDTH, traces);
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void process_packet_motion_v4(struct psmouse *psmouse)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0;
+ int id, sid;
+
+ id = ((packet[0] & 0xe0) >> 5) - 1;
+ if (id < 0)
+ return;
+
+ sid = ((packet[3] & 0xe0) >> 5) - 1;
+ weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1;
+ /*
+ * Motion packets give us the delta of x, y values of specific fingers,
+ * but in two's complement. Let the compiler do the conversion for us.
+ * Also _enlarge_ the numbers to int, in case of overflow.
+ */
+ delta_x1 = (signed char)packet[1];
+ delta_y1 = (signed char)packet[2];
+ delta_x2 = (signed char)packet[4];
+ delta_y2 = (signed char)packet[5];
+
+ etd->mt[id].x += delta_x1 * weight;
+ etd->mt[id].y -= delta_y1 * weight;
+ input_mt_slot(dev, id);
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
+
+ if (sid >= 0) {
+ etd->mt[sid].x += delta_x2 * weight;
+ etd->mt[sid].y -= delta_y2 * weight;
+ input_mt_slot(dev, sid);
+ input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y);
+ }
+
+ elantech_input_sync_v4(psmouse);
+}
+
+static void elantech_report_absolute_v4(struct psmouse *psmouse,
+ int packet_type)
+{
+ switch (packet_type) {
+ case PACKET_V4_STATUS:
+ process_packet_status_v4(psmouse);
+ break;
+
+ case PACKET_V4_HEAD:
+ process_packet_head_v4(psmouse);
+ break;
+
+ case PACKET_V4_MOTION:
+ process_packet_motion_v4(psmouse);
+ break;
+
+ case PACKET_UNKNOWN:
+ default:
+ /* impossible to get here */
+ break;
+ }
+}
+
+static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
@@ -376,31 +609,142 @@
etd->parity[packet[3]] == p3;
}
+static int elantech_debounce_check_v2(struct psmouse *psmouse)
+{
+ /*
+ * When we encounter packet that matches this exactly, it means the
+ * hardware is in debounce status. Just ignore the whole packet.
+ */
+ const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff };
+ unsigned char *packet = psmouse->packet;
+
+ return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
+}
+
+static int elantech_packet_check_v2(struct psmouse *psmouse)
+{
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+
+ /*
+ * V2 hardware has two flavors. Older ones that do not report pressure,
+ * and newer ones that reports pressure and width. With newer ones, all
+ * packets (1, 2, 3 finger touch) have the same constant bits. With
+ * older ones, 1/3 finger touch packets and 2 finger touch packets
+ * have different constant bits.
+ * With all three cases, if the constant bits are not exactly what I
+ * expected, I consider them invalid.
+ */
+ if (etd->reports_pressure)
+ return (packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x0f) == 0x02;
+
+ if ((packet[0] & 0xc0) == 0x80)
+ return (packet[0] & 0x0c) == 0x0c &&
+ (packet[3] & 0x0e) == 0x08;
+
+ return (packet[0] & 0x3c) == 0x3c &&
+ (packet[1] & 0xf0) == 0x00 &&
+ (packet[3] & 0x3e) == 0x38 &&
+ (packet[4] & 0xf0) == 0x00;
+}
+
+/*
+ * We check the constant bits to determine what packet type we get,
+ * so packet checking is mandatory for v3 and later hardware.
+ */
+static int elantech_packet_check_v3(struct psmouse *psmouse)
+{
+ const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff };
+ unsigned char *packet = psmouse->packet;
+
+ /*
+ * check debounce first, it has the same signature in byte 0
+ * and byte 3 as PACKET_V3_HEAD.
+ */
+ if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
+ return PACKET_DEBOUNCE;
+
+ if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
+ return PACKET_V3_HEAD;
+
+ if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
+ return PACKET_V3_TAIL;
+
+ return PACKET_UNKNOWN;
+}
+
+static int elantech_packet_check_v4(struct psmouse *psmouse)
+{
+ unsigned char *packet = psmouse->packet;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x11)
+ return PACKET_V4_HEAD;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x12)
+ return PACKET_V4_MOTION;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x1f) == 0x10)
+ return PACKET_V4_STATUS;
+
+ return PACKET_UNKNOWN;
+}
+
/*
* Process byte stream from mouse and handle complete packets
*/
static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
+ int packet_type;
if (psmouse->pktcnt < psmouse->pktsize)
return PSMOUSE_GOOD_DATA;
if (etd->debug > 1)
- elantech_packet_dump(psmouse->packet, psmouse->pktsize);
+ elantech_packet_dump(psmouse);
switch (etd->hw_version) {
case 1:
- if (etd->paritycheck && !elantech_check_parity_v1(psmouse))
+ if (etd->paritycheck && !elantech_packet_check_v1(psmouse))
return PSMOUSE_BAD_DATA;
elantech_report_absolute_v1(psmouse);
break;
case 2:
- /* We don't know how to check parity in protocol v2 */
+ /* ignore debounce */
+ if (elantech_debounce_check_v2(psmouse))
+ return PSMOUSE_FULL_PACKET;
+
+ if (etd->paritycheck && !elantech_packet_check_v2(psmouse))
+ return PSMOUSE_BAD_DATA;
+
elantech_report_absolute_v2(psmouse);
break;
+
+ case 3:
+ packet_type = elantech_packet_check_v3(psmouse);
+ /* ignore debounce */
+ if (packet_type == PACKET_DEBOUNCE)
+ return PSMOUSE_FULL_PACKET;
+
+ if (packet_type == PACKET_UNKNOWN)
+ return PSMOUSE_BAD_DATA;
+
+ elantech_report_absolute_v3(psmouse, packet_type);
+ break;
+
+ case 4:
+ packet_type = elantech_packet_check_v4(psmouse);
+ if (packet_type == PACKET_UNKNOWN)
+ return PSMOUSE_BAD_DATA;
+
+ elantech_report_absolute_v4(psmouse, packet_type);
+ break;
}
return PSMOUSE_FULL_PACKET;
@@ -435,15 +779,29 @@
elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
rc = -1;
- break;
}
+ break;
+
+ case 3:
+ etd->reg_10 = 0x0b;
+ if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
+ rc = -1;
+
+ break;
+
+ case 4:
+ etd->reg_07 = 0x01;
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ rc = -1;
+
+ goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */
}
if (rc == 0) {
/*
* Read back reg 0x10. For hardware version 1 we must make
* sure the absolute mode bit is set. For hardware version 2
- * the touchpad is probably initalising and not ready until
+ * the touchpad is probably initializing and not ready until
* we read back the value we just wrote.
*/
do {
@@ -456,27 +814,115 @@
} while (tries > 0);
if (rc) {
- pr_err("failed to read back register 0x10.\n");
+ psmouse_err(psmouse,
+ "failed to read back register 0x10.\n");
} else if (etd->hw_version == 1 &&
!(val & ETP_R10_ABSOLUTE_MODE)) {
- pr_err("touchpad refuses to switch to absolute mode.\n");
+ psmouse_err(psmouse,
+ "touchpad refuses to switch to absolute mode.\n");
rc = -1;
}
}
+ skip_readback_reg_10:
if (rc)
- pr_err("failed to initialise registers.\n");
+ psmouse_err(psmouse, "failed to initialise registers.\n");
return rc;
}
+static int elantech_set_range(struct psmouse *psmouse,
+ unsigned int *x_min, unsigned int *y_min,
+ unsigned int *x_max, unsigned int *y_max,
+ unsigned int *width)
+{
+ struct elantech_data *etd = psmouse->private;
+ unsigned char param[3];
+ unsigned char traces;
+
+ switch (etd->hw_version) {
+ case 1:
+ *x_min = ETP_XMIN_V1;
+ *y_min = ETP_YMIN_V1;
+ *x_max = ETP_XMAX_V1;
+ *y_max = ETP_YMAX_V1;
+ break;
+
+ case 2:
+ if (etd->fw_version == 0x020800 ||
+ etd->fw_version == 0x020b00 ||
+ etd->fw_version == 0x020030) {
+ *x_min = ETP_XMIN_V2;
+ *y_min = ETP_YMIN_V2;
+ *x_max = ETP_XMAX_V2;
+ *y_max = ETP_YMAX_V2;
+ } else {
+ int i;
+ int fixed_dpi;
+
+ i = (etd->fw_version > 0x020800 &&
+ etd->fw_version < 0x020900) ? 1 : 2;
+
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ fixed_dpi = param[1] & 0x10;
+
+ if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) {
+ if (synaptics_send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
+ return -1;
+
+ *x_max = (etd->capabilities[1] - i) * param[1] / 2;
+ *y_max = (etd->capabilities[2] - i) * param[2] / 2;
+ } else if (etd->fw_version == 0x040216) {
+ *x_max = 819;
+ *y_max = 405;
+ } else if (etd->fw_version == 0x040219 || etd->fw_version == 0x040215) {
+ *x_max = 900;
+ *y_max = 500;
+ } else {
+ *x_max = (etd->capabilities[1] - i) * 64;
+ *y_max = (etd->capabilities[2] - i) * 64;
+ }
+ }
+ break;
+
+ case 3:
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ *x_max = (0x0f & param[0]) << 8 | param[1];
+ *y_max = (0xf0 & param[0]) << 4 | param[2];
+ break;
+
+ case 4:
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ *x_max = (0x0f & param[0]) << 8 | param[1];
+ *y_max = (0xf0 & param[0]) << 4 | param[2];
+ traces = etd->capabilities[1];
+ if ((traces < 2) || (traces > *x_max))
+ return -1;
+
+ *width = *x_max / (traces - 1);
+ break;
+ }
+
+ return 0;
+}
+
/*
* Set the appropriate event bits for the input subsystem
*/
-static void elantech_set_input_params(struct psmouse *psmouse)
+static int elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
+ unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0;
+
+ if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
+ return -1;
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
@@ -494,30 +940,64 @@
case 1:
/* Rocker button */
if (etd->fw_version < 0x020000 &&
- (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+ (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
__set_bit(BTN_FORWARD, dev->keybit);
__set_bit(BTN_BACK, dev->keybit);
}
- input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0);
- input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0);
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
break;
case 2:
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
- input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
- input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+ __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+ /* fall through */
+ case 3:
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
if (etd->reports_pressure) {
input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
ETP_WMAX_V2, 0, 0);
}
- __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
- input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
+ break;
+
+ case 4:
+ __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
+ /* For X to recognize me as touchpad. */
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
+ /*
+ * range of pressure and width is the same as v2,
+ * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
+ */
+ input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
+ ETP_PMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
+ ETP_WMAX_V2, 0, 0);
+ /* Multitouch capable pad, up to 5 fingers. */
+ input_mt_init_slots(dev, ETP_MAX_FINGERS);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
+ ETP_PMAX_V2, 0, 0);
+ /*
+ * The firmware reports how many trace lines the finger spans,
+ * convert to surface unit as Protocol-B requires.
+ */
+ input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0,
+ ETP_WMAX_V2 * width, 0, 0);
break;
}
+
+ etd->y_max = y_max;
+ etd->width = width;
+
+ return 0;
}
struct elantech_attr_data {
@@ -587,6 +1067,7 @@
elantech_show_int_attr, \
elantech_set_int_attr)
+ELANTECH_INT_ATTR(reg_07, 0x07);
ELANTECH_INT_ATTR(reg_10, 0x10);
ELANTECH_INT_ATTR(reg_11, 0x11);
ELANTECH_INT_ATTR(reg_20, 0x20);
@@ -600,6 +1081,7 @@
ELANTECH_INT_ATTR(paritycheck, 0);
static struct attribute *elantech_attrs[] = {
+ &psmouse_attr_reg_07.dattr.attr,
&psmouse_attr_reg_10.dattr.attr,
&psmouse_attr_reg_11.dattr.attr,
&psmouse_attr_reg_20.dattr.attr,
@@ -651,7 +1133,7 @@
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
- pr_debug("sending Elantech magic knock failed.\n");
+ psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n");
return -1;
}
@@ -659,9 +1141,11 @@
* Report this in case there are Elantech models that use a different
* set of magic numbers
*/
- if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
- pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
+ if (param[0] != 0x3c || param[1] != 0x03 ||
+ (param[2] != 0xc8 && param[2] != 0x00)) {
+ psmouse_dbg(psmouse,
+ "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
return -1;
}
@@ -671,20 +1155,18 @@
* to Elantech magic knock and there might be more.
*/
if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
- pr_debug("failed to query firmware version.\n");
+ psmouse_dbg(psmouse, "failed to query firmware version.\n");
return -1;
}
- pr_debug("Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
+ psmouse_dbg(psmouse,
+ "Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
if (!elantech_is_signature_valid(param)) {
- if (!force_elantech) {
- pr_debug("Probably not a real Elantech touchpad. Aborting.\n");
- return -1;
- }
-
- pr_debug("Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
+ psmouse_dbg(psmouse,
+ "Probably not a real Elantech touchpad. Aborting.\n");
+ return -1;
}
if (set_properties) {
@@ -715,7 +1197,8 @@
return -1;
if (elantech_set_absolute_mode(psmouse)) {
- pr_err("failed to put touchpad back into absolute mode.\n");
+ psmouse_err(psmouse,
+ "failed to put touchpad back into absolute mode.\n");
return -1;
}
@@ -723,6 +1206,48 @@
}
/*
+ * determine hardware version and set some properties according to it.
+ */
+static int elantech_set_properties(struct elantech_data *etd)
+{
+ int ver = (etd->fw_version & 0x0f0000) >> 16;
+
+ if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
+ etd->hw_version = 1;
+ else if (etd->fw_version < 0x150600)
+ etd->hw_version = 2;
+ else if (ver == 5)
+ etd->hw_version = 3;
+ else if (ver == 6)
+ etd->hw_version = 4;
+ else
+ return -1;
+
+ /*
+ * Turn on packet checking by default.
+ */
+ etd->paritycheck = 1;
+
+ /*
+ * This firmware suffers from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ etd->jumpy_cursor =
+ (etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
+
+ if (etd->hw_version > 1) {
+ /* For now show extra debug information */
+ etd->debug = 1;
+
+ if (etd->fw_version >= 0x020800)
+ etd->reports_pressure = true;
+ }
+
+ return 0;
+}
+
+/*
* Initialize the touchpad and create sysfs entries
*/
int elantech_init(struct psmouse *psmouse)
@@ -743,70 +1268,53 @@
* Do the version query again so we can store the result
*/
if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
- pr_err("failed to query firmware version.\n");
+ psmouse_err(psmouse, "failed to query firmware version.\n");
goto init_fail;
}
-
etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
- /*
- * Assume every version greater than this is new EeePC style
- * hardware with 6 byte packets
- */
- if (etd->fw_version >= 0x020030) {
- etd->hw_version = 2;
- /* For now show extra debug information */
- etd->debug = 1;
- /* Don't know how to do parity checking for version 2 */
- etd->paritycheck = 0;
-
- if (etd->fw_version >= 0x020800)
- etd->reports_pressure = true;
-
- } else {
- etd->hw_version = 1;
- etd->paritycheck = 1;
- }
-
- pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
- etd->hw_version, param[0], param[1], param[2]);
-
- if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
- pr_err("failed to query capabilities.\n");
+ if (elantech_set_properties(etd)) {
+ psmouse_err(psmouse, "unknown hardware version, aborting...\n");
goto init_fail;
}
- pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
- etd->capabilities = param[0];
+ psmouse_info(psmouse,
+ "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n",
+ etd->hw_version, param[0], param[1], param[2]);
- /*
- * This firmware suffers from misreporting coordinates when
- * a touch action starts causing the mouse cursor or scrolled page
- * to jump. Enable a workaround.
- */
- if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) {
- pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n");
- etd->jumpy_cursor = true;
+ if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
+ etd->capabilities)) {
+ psmouse_err(psmouse, "failed to query capabilities.\n");
+ goto init_fail;
}
+ psmouse_info(psmouse,
+ "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
+ etd->capabilities[0], etd->capabilities[1],
+ etd->capabilities[2]);
if (elantech_set_absolute_mode(psmouse)) {
- pr_err("failed to put touchpad into absolute mode.\n");
+ psmouse_err(psmouse,
+ "failed to put touchpad into absolute mode.\n");
goto init_fail;
}
- elantech_set_input_params(psmouse);
+ if (elantech_set_input_params(psmouse)) {
+ psmouse_err(psmouse, "failed to query touchpad range.\n");
+ goto init_fail;
+ }
error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
&elantech_attr_group);
if (error) {
- pr_err("failed to create sysfs attributes, error: %d.\n", error);
+ psmouse_err(psmouse,
+ "failed to create sysfs attributes, error: %d.\n",
+ error);
goto init_fail;
}
psmouse->protocol_handler = elantech_process_byte;
psmouse->disconnect = elantech_disconnect;
psmouse->reconnect = elantech_reconnect;
- psmouse->pktsize = etd->hw_version == 2 ? 6 : 4;
+ psmouse->pktsize = etd->hw_version > 1 ? 6 : 4;
return 0;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index fabb2b9..9e5f1aa 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -16,14 +16,17 @@
/*
* Command values for Synaptics style queries
*/
+#define ETP_FW_ID_QUERY 0x00
#define ETP_FW_VERSION_QUERY 0x01
#define ETP_CAPABILITIES_QUERY 0x02
+#define ETP_SAMPLE_QUERY 0x03
/*
* Command values for register reading or writing
*/
#define ETP_REGISTER_READ 0x10
#define ETP_REGISTER_WRITE 0x11
+#define ETP_REGISTER_READWRITE 0x00
/*
* Hardware version 2 custom PS/2 command value
@@ -66,16 +69,13 @@
#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1)
/*
- * It seems the resolution for hardware version 2 doubled.
- * Hence the X and Y ranges are doubled too.
- * The bezel around the pad also appears to be smaller
+ * The resolution for older v2 hardware doubled.
+ * (newer v2's firmware provides command so we can query)
*/
-#define ETP_EDGE_FUZZ_V2 8
-
-#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2)
-#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2)
-#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2)
-#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2)
+#define ETP_XMIN_V2 0
+#define ETP_XMAX_V2 1152
+#define ETP_YMIN_V2 0
+#define ETP_YMAX_V2 768
#define ETP_PMIN_V2 0
#define ETP_PMAX_V2 255
@@ -83,17 +83,37 @@
#define ETP_WMAX_V2 15
/*
- * For two finger touches the coordinate of each finger gets reported
- * separately but with reduced resolution.
+ * v3 hardware has 2 kinds of packet types,
+ * v4 hardware has 3.
*/
-#define ETP_2FT_FUZZ 4
+#define PACKET_UNKNOWN 0x01
+#define PACKET_DEBOUNCE 0x02
+#define PACKET_V3_HEAD 0x03
+#define PACKET_V3_TAIL 0x04
+#define PACKET_V4_HEAD 0x05
+#define PACKET_V4_MOTION 0x06
+#define PACKET_V4_STATUS 0x07
-#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ)
-#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ)
-#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ)
-#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ)
+/*
+ * track up to 5 fingers for v4 hardware
+ */
+#define ETP_MAX_FINGERS 5
+
+/*
+ * weight value for v4 hardware
+ */
+#define ETP_WEIGHT_VALUE 5
+
+/*
+ * The base position for one finger, v4 hardware
+ */
+struct finger_pos {
+ unsigned int x;
+ unsigned int y;
+};
struct elantech_data {
+ unsigned char reg_07;
unsigned char reg_10;
unsigned char reg_11;
unsigned char reg_20;
@@ -104,13 +124,16 @@
unsigned char reg_25;
unsigned char reg_26;
unsigned char debug;
- unsigned char capabilities;
+ unsigned char capabilities[3];
bool paritycheck;
bool jumpy_cursor;
bool reports_pressure;
unsigned char hw_version;
unsigned int fw_version;
unsigned int single_finger_reports;
+ unsigned int y_max;
+ unsigned int width;
+ struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
};
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 4d17d9f..0470dd4 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -136,10 +136,10 @@
/* discard if too big, or half that but > 4 times the prev delta */
if (avx > recalib_delta ||
(avx > recalib_delta / 2 && ((avx / 4) > priv->xlast))) {
- hgpk_err(psmouse, "detected %dpx jump in x\n", x);
+ psmouse_warn(psmouse, "detected %dpx jump in x\n", x);
priv->xbigj = avx;
} else if (approx_half(avx, priv->xbigj)) {
- hgpk_err(psmouse, "detected secondary %dpx jump in x\n", x);
+ psmouse_warn(psmouse, "detected secondary %dpx jump in x\n", x);
priv->xbigj = avx;
priv->xsaw_secondary++;
} else {
@@ -151,10 +151,10 @@
if (avy > recalib_delta ||
(avy > recalib_delta / 2 && ((avy / 4) > priv->ylast))) {
- hgpk_err(psmouse, "detected %dpx jump in y\n", y);
+ psmouse_warn(psmouse, "detected %dpx jump in y\n", y);
priv->ybigj = avy;
} else if (approx_half(avy, priv->ybigj)) {
- hgpk_err(psmouse, "detected secondary %dpx jump in y\n", y);
+ psmouse_warn(psmouse, "detected secondary %dpx jump in y\n", y);
priv->ybigj = avy;
priv->ysaw_secondary++;
} else {
@@ -168,7 +168,7 @@
priv->ylast = avy;
if (do_recal && jumpy_delay) {
- hgpk_err(psmouse, "scheduling recalibration\n");
+ psmouse_warn(psmouse, "scheduling recalibration\n");
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(jumpy_delay));
}
@@ -260,8 +260,8 @@
* movement, it is probably a case of the user moving the
* cursor very slowly across the screen. */
if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) {
- hgpk_err(psmouse, "packet spew detected (%d,%d)\n",
- priv->x_tally, priv->y_tally);
+ psmouse_warn(psmouse, "packet spew detected (%d,%d)\n",
+ priv->x_tally, priv->y_tally);
priv->spew_flag = RECALIBRATING;
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(spew_delay));
@@ -333,12 +333,12 @@
}
if (!valid)
- hgpk_dbg(psmouse,
- "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n",
- priv->mode, pktcnt,
- psmouse->packet[0], psmouse->packet[1],
- psmouse->packet[2], psmouse->packet[3],
- psmouse->packet[4], psmouse->packet[5]);
+ psmouse_dbg(psmouse,
+ "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n",
+ priv->mode, pktcnt,
+ psmouse->packet[0], psmouse->packet[1],
+ psmouse->packet[2], psmouse->packet[3],
+ psmouse->packet[4], psmouse->packet[5]);
return valid;
}
@@ -361,19 +361,20 @@
input_report_abs(idev, ABS_PRESSURE, z);
if (tpdebug)
- hgpk_dbg(psmouse, "pd=%d fd=%d z=%d",
- pt_down, finger_down, z);
+ psmouse_dbg(psmouse, "pd=%d fd=%d z=%d",
+ pt_down, finger_down, z);
} else {
/*
* PenTablet mode does not report pressure, so we don't
* report it here
*/
if (tpdebug)
- hgpk_dbg(psmouse, "pd=%d ", down);
+ psmouse_dbg(psmouse, "pd=%d ", down);
}
if (tpdebug)
- hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y);
+ psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n",
+ left, right, x, y);
input_report_key(idev, BTN_TOUCH, down);
input_report_key(idev, BTN_LEFT, left);
@@ -395,7 +396,7 @@
if (x == priv->abs_x && y == priv->abs_y) {
if (++priv->dupe_count > SPEW_WATCH_COUNT) {
if (tpdebug)
- hgpk_dbg(psmouse, "hard spew detected\n");
+ psmouse_dbg(psmouse, "hard spew detected\n");
priv->spew_flag = RECALIBRATING;
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(spew_delay));
@@ -412,7 +413,7 @@
int y_diff = priv->abs_y - y;
if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) {
if (tpdebug)
- hgpk_dbg(psmouse, "discarding\n");
+ psmouse_dbg(psmouse, "discarding\n");
goto done;
}
hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff);
@@ -437,20 +438,21 @@
int y = ((packet[0] << 3) & 0x100) - packet[2];
if (packet[0] & 0xc0)
- hgpk_dbg(psmouse,
- "overflow -- 0x%02x 0x%02x 0x%02x\n",
- packet[0], packet[1], packet[2]);
+ psmouse_dbg(psmouse,
+ "overflow -- 0x%02x 0x%02x 0x%02x\n",
+ packet[0], packet[1], packet[2]);
if (hgpk_discard_decay_hack(psmouse, x, y)) {
if (tpdebug)
- hgpk_dbg(psmouse, "discarding\n");
+ psmouse_dbg(psmouse, "discarding\n");
return;
}
hgpk_spewing_hack(psmouse, left, right, x, y);
if (tpdebug)
- hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y);
+ psmouse_dbg(psmouse, "l=%d r=%d x=%d y=%d\n",
+ left, right, x, y);
input_report_key(dev, BTN_LEFT, left);
input_report_key(dev, BTN_RIGHT, right);
@@ -482,9 +484,8 @@
* ugh, got a packet inside our recalibration
* window, schedule another recalibration.
*/
- hgpk_dbg(psmouse,
- "packet inside calibration window, "
- "queueing another recalibration\n");
+ psmouse_dbg(psmouse,
+ "packet inside calibration window, queueing another recalibration\n");
psmouse_queue_work(psmouse, &priv->recalib_wq,
msecs_to_jiffies(post_interrupt_delay));
}
@@ -628,7 +629,7 @@
err = hgpk_select_mode(psmouse);
if (err) {
- hgpk_err(psmouse, "failed to select mode\n");
+ psmouse_err(psmouse, "failed to select mode\n");
return err;
}
@@ -648,11 +649,11 @@
return 0;
if (!autorecal) {
- hgpk_dbg(psmouse, "recalibrations disabled, ignoring\n");
+ psmouse_dbg(psmouse, "recalibration disabled, ignoring\n");
return 0;
}
- hgpk_dbg(psmouse, "recalibrating touchpad..\n");
+ psmouse_dbg(psmouse, "recalibrating touchpad..\n");
/* we don't want to race with the irq handler, nor with resyncs */
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
@@ -675,7 +676,7 @@
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
if (tpdebug)
- hgpk_dbg(psmouse, "touchpad reactivated\n");
+ psmouse_dbg(psmouse, "touchpad reactivated\n");
/*
* If we get packets right away after recalibrating, it's likely
@@ -727,16 +728,16 @@
err = hgpk_reset_device(psmouse, false);
if (err) {
- hgpk_err(psmouse, "Failed to reset device!\n");
+ psmouse_err(psmouse, "Failed to reset device!\n");
return err;
}
/* should be all set, enable the touchpad */
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
- hgpk_dbg(psmouse, "Touchpad powered up.\n");
+ psmouse_dbg(psmouse, "Touchpad powered up.\n");
} else {
- hgpk_dbg(psmouse, "Powering off touchpad.\n");
+ psmouse_dbg(psmouse, "Powering off touchpad.\n");
if (ps2_command(ps2dev, NULL, 0xec) ||
ps2_command(ps2dev, NULL, 0xec) ||
@@ -923,7 +924,7 @@
struct psmouse *psmouse = priv->psmouse;
if (hgpk_force_recalibrate(psmouse))
- hgpk_err(psmouse, "recalibration failed!\n");
+ psmouse_err(psmouse, "recalibration failed!\n");
}
static int hgpk_register(struct psmouse *psmouse)
@@ -947,14 +948,15 @@
err = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_powered.dattr);
if (err) {
- hgpk_err(psmouse, "Failed creating 'powered' sysfs node\n");
+ psmouse_err(psmouse, "Failed creating 'powered' sysfs node\n");
return err;
}
err = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_hgpk_mode.dattr);
if (err) {
- hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n");
+ psmouse_err(psmouse,
+ "Failed creating 'hgpk_mode' sysfs node\n");
goto err_remove_powered;
}
@@ -963,8 +965,8 @@
err = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_recalibrate.dattr);
if (err) {
- hgpk_err(psmouse,
- "Failed creating 'recalibrate' sysfs node\n");
+ psmouse_err(psmouse,
+ "Failed creating 'recalibrate' sysfs node\n");
goto err_remove_mode;
}
}
@@ -1027,13 +1029,13 @@
return -EIO;
}
- hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]);
+ psmouse_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]);
/* HGPK signature: 0x67, 0x00, 0x<model> */
if (param[0] != 0x67 || param[1] != 0x00)
return -ENODEV;
- hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]);
+ psmouse_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]);
return param[2];
}
diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h
index 311c0e8..dd68677 100644
--- a/drivers/input/mouse/hgpk.h
+++ b/drivers/input/mouse/hgpk.h
@@ -46,17 +46,6 @@
int xsaw_secondary, ysaw_secondary; /* jumpiness detection */
};
-#define hgpk_dbg(psmouse, format, arg...) \
- dev_dbg(&(psmouse)->ps2dev.serio->dev, format, ## arg)
-#define hgpk_err(psmouse, format, arg...) \
- dev_err(&(psmouse)->ps2dev.serio->dev, format, ## arg)
-#define hgpk_info(psmouse, format, arg...) \
- dev_info(&(psmouse)->ps2dev.serio->dev, format, ## arg)
-#define hgpk_warn(psmouse, format, arg...) \
- dev_warn(&(psmouse)->ps2dev.serio->dev, format, ## arg)
-#define hgpk_notice(psmouse, format, arg...) \
- dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg)
-
#ifdef CONFIG_MOUSE_PS2_OLPC
void hgpk_module_init(void);
int hgpk_detect(struct psmouse *psmouse, bool set_properties);
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 83bcaba..2c4db63 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -169,8 +169,8 @@
if (relative_packet) {
if (!dev2)
- printk(KERN_WARNING "lifebook.c: got relative packet "
- "but no relative device set up\n");
+ psmouse_warn(psmouse,
+ "got relative packet but no relative device set up\n");
} else {
if (lifebook_use_6byte_proto) {
input_report_abs(dev1, ABS_X,
@@ -212,7 +212,7 @@
/*
* Enable absolute output -- ps2_command fails always but if
- * you leave this call out the touchsreen will never send
+ * you leave this call out the touchscreen will never send
* absolute coordinates
*/
param = lifebook_use_6byte_proto ? 0x08 : 0x07;
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index c9983ae..faac2c3 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -82,11 +82,11 @@
packet[0] = packet[2] | 0x08;
break;
-#ifdef DEBUG
default:
- printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n",
- (packet[1] >> 4) | (packet[0] & 0x30));
-#endif
+ psmouse_dbg(psmouse,
+ "Received PS2++ packet #%x, but don't know how to handle.\n",
+ (packet[1] >> 4) | (packet[0] & 0x30));
+ break;
}
} else {
/* Standard PS/2 motion data */
@@ -382,7 +382,7 @@
}
} else {
- printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model);
+ psmouse_warn(psmouse, "Detected unknown Logitech mouse model %d\n", model);
}
if (set_properties) {
@@ -400,9 +400,9 @@
error = device_create_file(&psmouse->ps2dev.serio->dev,
&psmouse_attr_smartscroll.dattr);
if (error) {
- printk(KERN_ERR
- "logips2pp.c: failed to create smartscroll "
- "sysfs attribute, error: %d\n", error);
+ psmouse_err(psmouse,
+ "failed to create smartscroll sysfs attribute, error: %d\n",
+ error);
return -1;
}
}
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 3f74bae..9f352fb 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -11,6 +11,9 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define psmouse_fmt(fmt) fmt
+
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -251,11 +254,14 @@
switch (rc) {
case PSMOUSE_BAD_DATA:
if (psmouse->state == PSMOUSE_ACTIVATED) {
- printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
- psmouse->name, psmouse->phys, psmouse->pktcnt);
+ psmouse_warn(psmouse,
+ "%s at %s lost sync at byte %d\n",
+ psmouse->name, psmouse->phys,
+ psmouse->pktcnt);
if (++psmouse->out_of_sync_cnt == psmouse->resetafter) {
__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
+ psmouse_notice(psmouse,
+ "issuing reconnect request\n");
serio_reconnect(psmouse->ps2dev.serio);
return -1;
}
@@ -267,8 +273,9 @@
psmouse->pktcnt = 0;
if (psmouse->out_of_sync_cnt) {
psmouse->out_of_sync_cnt = 0;
- printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
- psmouse->name, psmouse->phys);
+ psmouse_notice(psmouse,
+ "%s at %s - driver resynced.\n",
+ psmouse->name, psmouse->phys);
}
break;
@@ -295,9 +302,10 @@
((flags & SERIO_PARITY) && !psmouse->ignore_parity))) {
if (psmouse->state == PSMOUSE_ACTIVATED)
- printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
- flags & SERIO_TIMEOUT ? " timeout" : "",
- flags & SERIO_PARITY ? " bad parity" : "");
+ psmouse_warn(psmouse,
+ "bad data from KBC -%s%s\n",
+ flags & SERIO_TIMEOUT ? " timeout" : "",
+ flags & SERIO_PARITY ? " bad parity" : "");
ps2_cmd_aborted(&psmouse->ps2dev);
goto out;
}
@@ -315,8 +323,8 @@
if (psmouse->state == PSMOUSE_ACTIVATED &&
psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) {
- printk(KERN_INFO "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n",
- psmouse->name, psmouse->phys, psmouse->pktcnt);
+ psmouse_info(psmouse, "%s at %s lost synchronization, throwing %d bytes away.\n",
+ psmouse->name, psmouse->phys, psmouse->pktcnt);
psmouse->badbyte = psmouse->packet[0];
__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
@@ -943,7 +951,8 @@
*/
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS))
- printk(KERN_WARNING "psmouse.c: Failed to reset mouse on %s\n", ps2dev->serio->phys);
+ psmouse_warn(psmouse, "Failed to reset mouse on %s\n",
+ ps2dev->serio->phys);
return 0;
}
@@ -1005,8 +1014,8 @@
static void psmouse_activate(struct psmouse *psmouse)
{
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE))
- printk(KERN_WARNING "psmouse.c: Failed to enable mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ psmouse_warn(psmouse, "Failed to enable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
}
@@ -1020,14 +1029,14 @@
static void psmouse_deactivate(struct psmouse *psmouse)
{
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE))
- printk(KERN_WARNING "psmouse.c: Failed to deactivate mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ psmouse_warn(psmouse, "Failed to deactivate mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
}
/*
- * psmouse_poll() - default poll hanlder. Everyone except for ALPS uses it.
+ * psmouse_poll() - default poll handler. Everyone except for ALPS uses it.
*/
static int psmouse_poll(struct psmouse *psmouse)
@@ -1115,14 +1124,15 @@
}
if (!enabled) {
- printk(KERN_WARNING "psmouse.c: failed to re-enable mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ psmouse_warn(psmouse, "failed to re-enable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
failed = true;
}
if (failed) {
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- printk(KERN_INFO "psmouse.c: resync failed, issuing reconnect request\n");
+ psmouse_info(psmouse,
+ "resync failed, issuing reconnect request\n");
serio_reconnect(serio);
} else
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
@@ -1155,8 +1165,8 @@
* Disable stream mode so cleanup routine can proceed undisturbed.
*/
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE))
- printk(KERN_WARNING "psmouse.c: Failed to disable mouse on %s\n",
- psmouse->ps2dev.serio->phys);
+ psmouse_warn(psmouse, "Failed to disable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
if (psmouse->cleanup)
psmouse->cleanup(psmouse);
@@ -1400,7 +1410,8 @@
int rc = -1;
if (!drv || !psmouse) {
- printk(KERN_DEBUG "psmouse: reconnect request, but serio is disconnected, ignoring...\n");
+ psmouse_dbg(psmouse,
+ "reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
@@ -1427,8 +1438,9 @@
goto out;
}
- /* ok, the device type (and capabilities) match the old one,
- * we can continue using it, complete intialization
+ /*
+ * OK, the device type (and capabilities) match the old one,
+ * we can continue using it, complete initialization
*/
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
@@ -1586,9 +1598,8 @@
while (!list_empty(&serio->children)) {
if (++retry > 3) {
- printk(KERN_WARNING
- "psmouse: failed to destroy children ports, "
- "protocol change aborted.\n");
+ psmouse_warn(psmouse,
+ "failed to destroy children ports, protocol change aborted.\n");
input_free_device(new_dev);
return -EIO;
}
@@ -1715,7 +1726,7 @@
kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
if (!kpsmoused_wq) {
- printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n");
+ pr_err("failed to create kpsmoused workqueue\n");
return -ENOMEM;
}
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 593e910..9b84b0c 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -150,4 +150,29 @@
static ssize_t _set(struct psmouse *, void *, const char *, size_t); \
__PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, NULL, _set, true)
+#ifndef psmouse_fmt
+#define psmouse_fmt(fmt) KBUILD_BASENAME ": " fmt
+#endif
+
+#define psmouse_dbg(psmouse, format, ...) \
+ dev_dbg(&(psmouse)->ps2dev.serio->dev, \
+ psmouse_fmt(format), ##__VA_ARGS__)
+#define psmouse_info(psmouse, format, ...) \
+ dev_info(&(psmouse)->ps2dev.serio->dev, \
+ psmouse_fmt(format), ##__VA_ARGS__)
+#define psmouse_warn(psmouse, format, ...) \
+ dev_warn(&(psmouse)->ps2dev.serio->dev, \
+ psmouse_fmt(format), ##__VA_ARGS__)
+#define psmouse_err(psmouse, format, ...) \
+ dev_err(&(psmouse)->ps2dev.serio->dev, \
+ psmouse_fmt(format), ##__VA_ARGS__)
+#define psmouse_notice(psmouse, format, ...) \
+ dev_notice(&(psmouse)->ps2dev.serio->dev, \
+ psmouse_fmt(format), ##__VA_ARGS__)
+#define psmouse_printk(level, psmouse, format, ...) \
+ dev_printk(level, \
+ &(psmouse)->ps2dev.serio->dev, \
+ psmouse_fmt(format), ##__VA_ARGS__)
+
+
#endif /* _PSMOUSE_H */
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
index 6c5d84f..ee3b0ca 100644
--- a/drivers/input/mouse/pxa930_trkball.c
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -183,7 +183,7 @@
/* held the module in reset, will be enabled in open() */
pxa930_trkball_disable(trkball);
- error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED,
+ error = request_irq(irq, pxa930_trkball_interrupt, 0,
pdev->name, trkball);
if (error) {
dev_err(&pdev->dev, "failed to request irq: %d\n", error);
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 2fc887a..c5b12d2 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -607,11 +607,12 @@
ps2_packet_cnt++;
jiffies_msec = jiffies_to_msecs(jiffies);
- printk(KERN_DEBUG "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n",
- jiffies_msec, packet[0], packet[1], packet[2], packet[3]);
+ psmouse_dbg(psmouse,
+ "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n",
+ jiffies_msec, packet[0], packet[1], packet[2], packet[3]);
if (jiffies_msec - ps2_last_second > 1000) {
- printk(KERN_DEBUG "PS/2 packets/sec = %d\n", ps2_packet_cnt);
+ psmouse_dbg(psmouse, "PS/2 packets/sec = %d\n", ps2_packet_cnt);
ps2_packet_cnt = 0;
ps2_last_second = jiffies_msec;
}
@@ -820,9 +821,9 @@
return -ENODEV;
}
- printk(KERN_INFO
- "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n",
- ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7);
+ psmouse_info(psmouse,
+ "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n",
+ ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7);
psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL);
if (!priv)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 5538fc6..c080b82 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -44,6 +44,16 @@
#define YMIN_NOMINAL 1408
#define YMAX_NOMINAL 4448
+/*
+ * Synaptics touchpads report the y coordinate from bottom to top, which is
+ * opposite from what userspace expects.
+ * This function is used to invert y before reporting.
+ */
+static int synaptics_invert_y(int y)
+{
+ return YMAX_NOMINAL + YMIN_NOMINAL - y;
+}
+
/*****************************************************************************
* Stuff we need even when we do not want native Synaptics support
@@ -157,8 +167,8 @@
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
- printk(KERN_ERR "Synaptics claims to have extended capabilities,"
- " but I'm not able to read them.\n");
+ psmouse_warn(psmouse,
+ "device claims to have extended capabilities, but I'm not able to read them.\n");
} else {
priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
@@ -173,8 +183,8 @@
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
- printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
- " but I'm not able to read it.\n");
+ psmouse_warn(psmouse,
+ "device claims to have extended capability 0x0c, but I'm not able to read it.\n");
} else {
priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
}
@@ -222,8 +232,8 @@
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) {
- printk(KERN_ERR "Synaptics claims to have max coordinates"
- " query, but I'm not able to read it.\n");
+ psmouse_warn(psmouse,
+ "device claims to have max coordinates query, but I'm not able to read it.\n");
} else {
priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
@@ -233,8 +243,8 @@
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 &&
SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) {
- printk(KERN_ERR "Synaptics claims to have min coordinates"
- " query, but I'm not able to read it.\n");
+ psmouse_warn(psmouse,
+ "device claims to have min coordinates query, but I'm not able to read it.\n");
} else {
priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
@@ -294,7 +304,8 @@
static unsigned char param = 0xc8;
struct synaptics_data *priv = psmouse->private;
- if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+ if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+ SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)))
return 0;
if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
@@ -377,7 +388,8 @@
priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT;
if (synaptics_mode_cmd(psmouse, priv->mode))
- printk(KERN_INFO "synaptics: failed to switch guest protocol\n");
+ psmouse_warn(psmouse,
+ "failed to switch guest protocol\n");
}
}
@@ -387,7 +399,8 @@
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!serio) {
- printk(KERN_ERR "synaptics: not enough memory to allocate pass-through port\n");
+ psmouse_err(psmouse,
+ "not enough memory for pass-through port\n");
return;
}
@@ -401,7 +414,8 @@
psmouse->pt_activate = synaptics_pt_activate;
- printk(KERN_INFO "serio: %s port at %s\n", serio->name, psmouse->phys);
+ psmouse_info(psmouse, "serio: %s port at %s\n",
+ serio->name, psmouse->phys);
serio_register_port(serio);
}
@@ -409,6 +423,44 @@
* Functions to interpret the absolute mode packets
****************************************************************************/
+static void synaptics_mt_state_set(struct synaptics_mt_state *state, int count,
+ int sgm, int agm)
+{
+ state->count = count;
+ state->sgm = sgm;
+ state->agm = agm;
+}
+
+static void synaptics_parse_agm(const unsigned char buf[],
+ struct synaptics_data *priv,
+ struct synaptics_hw_state *hw)
+{
+ struct synaptics_hw_state *agm = &priv->agm;
+ int agm_packet_type;
+
+ agm_packet_type = (buf[5] & 0x30) >> 4;
+ switch (agm_packet_type) {
+ case 1:
+ /* Gesture packet: (x, y, z) half resolution */
+ agm->w = hw->w;
+ agm->x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
+ agm->y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
+ agm->z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
+ break;
+
+ case 2:
+ /* AGM-CONTACT packet: (count, sgm, agm) */
+ synaptics_mt_state_set(&agm->mt_state, buf[1], buf[2], buf[4]);
+ break;
+
+ default:
+ break;
+ }
+
+ /* Record that at least one AGM has been received since last SGM */
+ priv->agm_pending = true;
+}
+
static int synaptics_parse_hw_state(const unsigned char buf[],
struct synaptics_data *priv,
struct synaptics_hw_state *hw)
@@ -442,11 +494,10 @@
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
}
- if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
- /* Gesture packet: (x, y, z) at half resolution */
- priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
- priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
- priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
+ if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+ SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+ hw->w == 2) {
+ synaptics_parse_agm(buf, priv, hw);
return 1;
}
@@ -502,8 +553,7 @@
input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
if (active) {
input_report_abs(dev, ABS_MT_POSITION_X, x);
- input_report_abs(dev, ABS_MT_POSITION_Y,
- YMAX_NOMINAL + YMIN_NOMINAL - y);
+ input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(y));
}
}
@@ -526,6 +576,388 @@
}
}
+static void synaptics_report_buttons(struct psmouse *psmouse,
+ const struct synaptics_hw_state *hw)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct synaptics_data *priv = psmouse->private;
+ int i;
+
+ input_report_key(dev, BTN_LEFT, hw->left);
+ input_report_key(dev, BTN_RIGHT, hw->right);
+
+ if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
+ input_report_key(dev, BTN_MIDDLE, hw->middle);
+
+ if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) {
+ input_report_key(dev, BTN_FORWARD, hw->up);
+ input_report_key(dev, BTN_BACK, hw->down);
+ }
+
+ for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
+ input_report_key(dev, BTN_0 + i, hw->ext_buttons & (1 << i));
+}
+
+static void synaptics_report_slot(struct input_dev *dev, int slot,
+ const struct synaptics_hw_state *hw)
+{
+ input_mt_slot(dev, slot);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, (hw != NULL));
+ if (!hw)
+ return;
+
+ input_report_abs(dev, ABS_MT_POSITION_X, hw->x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(hw->y));
+ input_report_abs(dev, ABS_MT_PRESSURE, hw->z);
+}
+
+static void synaptics_report_mt_data(struct psmouse *psmouse,
+ struct synaptics_mt_state *mt_state,
+ const struct synaptics_hw_state *sgm)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct synaptics_data *priv = psmouse->private;
+ struct synaptics_hw_state *agm = &priv->agm;
+ struct synaptics_mt_state *old = &priv->mt_state;
+
+ switch (mt_state->count) {
+ case 0:
+ synaptics_report_slot(dev, 0, NULL);
+ synaptics_report_slot(dev, 1, NULL);
+ break;
+ case 1:
+ if (mt_state->sgm == -1) {
+ synaptics_report_slot(dev, 0, NULL);
+ synaptics_report_slot(dev, 1, NULL);
+ } else if (mt_state->sgm == 0) {
+ synaptics_report_slot(dev, 0, sgm);
+ synaptics_report_slot(dev, 1, NULL);
+ } else {
+ synaptics_report_slot(dev, 0, NULL);
+ synaptics_report_slot(dev, 1, sgm);
+ }
+ break;
+ default:
+ /*
+ * If the finger slot contained in SGM is valid, and either
+ * hasn't changed, or is new, then report SGM in MTB slot 0.
+ * Otherwise, empty MTB slot 0.
+ */
+ if (mt_state->sgm != -1 &&
+ (mt_state->sgm == old->sgm || old->sgm == -1))
+ synaptics_report_slot(dev, 0, sgm);
+ else
+ synaptics_report_slot(dev, 0, NULL);
+
+ /*
+ * If the finger slot contained in AGM is valid, and either
+ * hasn't changed, or is new, then report AGM in MTB slot 1.
+ * Otherwise, empty MTB slot 1.
+ */
+ if (mt_state->agm != -1 &&
+ (mt_state->agm == old->agm || old->agm == -1))
+ synaptics_report_slot(dev, 1, agm);
+ else
+ synaptics_report_slot(dev, 1, NULL);
+ break;
+ }
+
+ /* Don't use active slot count to generate BTN_TOOL events. */
+ input_mt_report_pointer_emulation(dev, false);
+
+ /* Send the number of fingers reported by touchpad itself. */
+ input_mt_report_finger_count(dev, mt_state->count);
+
+ synaptics_report_buttons(psmouse, sgm);
+
+ input_sync(dev);
+}
+
+/* Handle case where mt_state->count = 0 */
+static void synaptics_image_sensor_0f(struct synaptics_data *priv,
+ struct synaptics_mt_state *mt_state)
+{
+ synaptics_mt_state_set(mt_state, 0, -1, -1);
+ priv->mt_state_lost = false;
+}
+
+/* Handle case where mt_state->count = 1 */
+static void synaptics_image_sensor_1f(struct synaptics_data *priv,
+ struct synaptics_mt_state *mt_state)
+{
+ struct synaptics_hw_state *agm = &priv->agm;
+ struct synaptics_mt_state *old = &priv->mt_state;
+
+ /*
+ * If the last AGM was (0,0,0), and there is only one finger left,
+ * then we absolutely know that SGM contains slot 0, and all other
+ * fingers have been removed.
+ */
+ if (priv->agm_pending && agm->z == 0) {
+ synaptics_mt_state_set(mt_state, 1, 0, -1);
+ priv->mt_state_lost = false;
+ return;
+ }
+
+ switch (old->count) {
+ case 0:
+ synaptics_mt_state_set(mt_state, 1, 0, -1);
+ break;
+ case 1:
+ /*
+ * If mt_state_lost, then the previous transition was 3->1,
+ * and SGM now contains either slot 0 or 1, but we don't know
+ * which. So, we just assume that the SGM now contains slot 1.
+ *
+ * If pending AGM and either:
+ * (a) the previous SGM slot contains slot 0, or
+ * (b) there was no SGM slot
+ * then, the SGM now contains slot 1
+ *
+ * Case (a) happens with very rapid "drum roll" gestures, where
+ * slot 0 finger is lifted and a new slot 1 finger touches
+ * within one reporting interval.
+ *
+ * Case (b) happens if initially two or more fingers tap
+ * briefly, and all but one lift before the end of the first
+ * reporting interval.
+ *
+ * (In both these cases, slot 0 will becomes empty, so SGM
+ * contains slot 1 with the new finger)
+ *
+ * Else, if there was no previous SGM, it now contains slot 0.
+ *
+ * Otherwise, SGM still contains the same slot.
+ */
+ if (priv->mt_state_lost ||
+ (priv->agm_pending && old->sgm <= 0))
+ synaptics_mt_state_set(mt_state, 1, 1, -1);
+ else if (old->sgm == -1)
+ synaptics_mt_state_set(mt_state, 1, 0, -1);
+ break;
+ case 2:
+ /*
+ * If mt_state_lost, we don't know which finger SGM contains.
+ *
+ * So, report 1 finger, but with both slots empty.
+ * We will use slot 1 on subsequent 1->1
+ */
+ if (priv->mt_state_lost) {
+ synaptics_mt_state_set(mt_state, 1, -1, -1);
+ break;
+ }
+ /*
+ * Since the last AGM was NOT (0,0,0), it was the finger in
+ * slot 0 that has been removed.
+ * So, SGM now contains previous AGM's slot, and AGM is now
+ * empty.
+ */
+ synaptics_mt_state_set(mt_state, 1, old->agm, -1);
+ break;
+ case 3:
+ /*
+ * Since last AGM was not (0,0,0), we don't know which finger
+ * is left.
+ *
+ * So, report 1 finger, but with both slots empty.
+ * We will use slot 1 on subsequent 1->1
+ */
+ synaptics_mt_state_set(mt_state, 1, -1, -1);
+ priv->mt_state_lost = true;
+ break;
+ case 4:
+ case 5:
+ /* mt_state was updated by AGM-CONTACT packet */
+ break;
+ }
+}
+
+/* Handle case where mt_state->count = 2 */
+static void synaptics_image_sensor_2f(struct synaptics_data *priv,
+ struct synaptics_mt_state *mt_state)
+{
+ struct synaptics_mt_state *old = &priv->mt_state;
+
+ switch (old->count) {
+ case 0:
+ synaptics_mt_state_set(mt_state, 2, 0, 1);
+ break;
+ case 1:
+ /*
+ * If previous SGM contained slot 1 or higher, SGM now contains
+ * slot 0 (the newly touching finger) and AGM contains SGM's
+ * previous slot.
+ *
+ * Otherwise, SGM still contains slot 0 and AGM now contains
+ * slot 1.
+ */
+ if (old->sgm >= 1)
+ synaptics_mt_state_set(mt_state, 2, 0, old->sgm);
+ else
+ synaptics_mt_state_set(mt_state, 2, 0, 1);
+ break;
+ case 2:
+ /*
+ * If mt_state_lost, SGM now contains either finger 1 or 2, but
+ * we don't know which.
+ * So, we just assume that the SGM contains slot 0 and AGM 1.
+ */
+ if (priv->mt_state_lost)
+ synaptics_mt_state_set(mt_state, 2, 0, 1);
+ /*
+ * Otherwise, use the same mt_state, since it either hasn't
+ * changed, or was updated by a recently received AGM-CONTACT
+ * packet.
+ */
+ break;
+ case 3:
+ /*
+ * 3->2 transitions have two unsolvable problems:
+ * 1) no indication is given which finger was removed
+ * 2) no way to tell if agm packet was for finger 3
+ * before 3->2, or finger 2 after 3->2.
+ *
+ * So, report 2 fingers, but empty all slots.
+ * We will guess slots [0,1] on subsequent 2->2.
+ */
+ synaptics_mt_state_set(mt_state, 2, -1, -1);
+ priv->mt_state_lost = true;
+ break;
+ case 4:
+ case 5:
+ /* mt_state was updated by AGM-CONTACT packet */
+ break;
+ }
+}
+
+/* Handle case where mt_state->count = 3 */
+static void synaptics_image_sensor_3f(struct synaptics_data *priv,
+ struct synaptics_mt_state *mt_state)
+{
+ struct synaptics_mt_state *old = &priv->mt_state;
+
+ switch (old->count) {
+ case 0:
+ synaptics_mt_state_set(mt_state, 3, 0, 2);
+ break;
+ case 1:
+ /*
+ * If previous SGM contained slot 2 or higher, SGM now contains
+ * slot 0 (one of the newly touching fingers) and AGM contains
+ * SGM's previous slot.
+ *
+ * Otherwise, SGM now contains slot 0 and AGM contains slot 2.
+ */
+ if (old->sgm >= 2)
+ synaptics_mt_state_set(mt_state, 3, 0, old->sgm);
+ else
+ synaptics_mt_state_set(mt_state, 3, 0, 2);
+ break;
+ case 2:
+ /*
+ * If the AGM previously contained slot 3 or higher, then the
+ * newly touching finger is in the lowest available slot.
+ *
+ * If SGM was previously 1 or higher, then the new SGM is
+ * now slot 0 (with a new finger), otherwise, the new finger
+ * is now in a hidden slot between 0 and AGM's slot.
+ *
+ * In all such cases, the SGM now contains slot 0, and the AGM
+ * continues to contain the same slot as before.
+ */
+ if (old->agm >= 3) {
+ synaptics_mt_state_set(mt_state, 3, 0, old->agm);
+ break;
+ }
+
+ /*
+ * After some 3->1 and all 3->2 transitions, we lose track
+ * of which slot is reported by SGM and AGM.
+ *
+ * For 2->3 in this state, report 3 fingers, but empty all
+ * slots, and we will guess (0,2) on a subsequent 0->3.
+ *
+ * To userspace, the resulting transition will look like:
+ * 2:[0,1] -> 3:[-1,-1] -> 3:[0,2]
+ */
+ if (priv->mt_state_lost) {
+ synaptics_mt_state_set(mt_state, 3, -1, -1);
+ break;
+ }
+
+ /*
+ * If the (SGM,AGM) really previously contained slots (0, 1),
+ * then we cannot know what slot was just reported by the AGM,
+ * because the 2->3 transition can occur either before or after
+ * the AGM packet. Thus, this most recent AGM could contain
+ * either the same old slot 1 or the new slot 2.
+ * Subsequent AGMs will be reporting slot 2.
+ *
+ * To userspace, the resulting transition will look like:
+ * 2:[0,1] -> 3:[0,-1] -> 3:[0,2]
+ */
+ synaptics_mt_state_set(mt_state, 3, 0, -1);
+ break;
+ case 3:
+ /*
+ * If, for whatever reason, the previous agm was invalid,
+ * Assume SGM now contains slot 0, AGM now contains slot 2.
+ */
+ if (old->agm <= 2)
+ synaptics_mt_state_set(mt_state, 3, 0, 2);
+ /*
+ * mt_state either hasn't changed, or was updated by a recently
+ * received AGM-CONTACT packet.
+ */
+ break;
+
+ case 4:
+ case 5:
+ /* mt_state was updated by AGM-CONTACT packet */
+ break;
+ }
+}
+
+/* Handle case where mt_state->count = 4, or = 5 */
+static void synaptics_image_sensor_45f(struct synaptics_data *priv,
+ struct synaptics_mt_state *mt_state)
+{
+ /* mt_state was updated correctly by AGM-CONTACT packet */
+ priv->mt_state_lost = false;
+}
+
+static void synaptics_image_sensor_process(struct psmouse *psmouse,
+ struct synaptics_hw_state *sgm)
+{
+ struct synaptics_data *priv = psmouse->private;
+ struct synaptics_hw_state *agm = &priv->agm;
+ struct synaptics_mt_state mt_state;
+
+ /* Initialize using current mt_state (as updated by last agm) */
+ mt_state = agm->mt_state;
+
+ /*
+ * Update mt_state using the new finger count and current mt_state.
+ */
+ if (sgm->z == 0)
+ synaptics_image_sensor_0f(priv, &mt_state);
+ else if (sgm->w >= 4)
+ synaptics_image_sensor_1f(priv, &mt_state);
+ else if (sgm->w == 0)
+ synaptics_image_sensor_2f(priv, &mt_state);
+ else if (sgm->w == 1 && mt_state.count <= 3)
+ synaptics_image_sensor_3f(priv, &mt_state);
+ else
+ synaptics_image_sensor_45f(priv, &mt_state);
+
+ /* Send resulting input events to user space */
+ synaptics_report_mt_data(psmouse, &mt_state, sgm);
+
+ /* Store updated mt_state */
+ priv->mt_state = agm->mt_state = mt_state;
+ priv->agm_pending = false;
+}
+
/*
* called for each full received packet from the touchpad
*/
@@ -536,11 +968,15 @@
struct synaptics_hw_state hw;
int num_fingers;
int finger_width;
- int i;
if (synaptics_parse_hw_state(psmouse->packet, priv, &hw))
return;
+ if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
+ synaptics_image_sensor_process(psmouse, &hw);
+ return;
+ }
+
if (hw.scroll) {
priv->scroll += hw.scroll;
@@ -586,7 +1022,8 @@
}
if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
- synaptics_report_semi_mt_data(dev, &hw, &priv->mt, num_fingers);
+ synaptics_report_semi_mt_data(dev, &hw, &priv->agm,
+ num_fingers);
/* Post events
* BTN_TOUCH has to be first as mousedev relies on it when doing
@@ -597,7 +1034,7 @@
if (num_fingers > 0) {
input_report_abs(dev, ABS_X, hw.x);
- input_report_abs(dev, ABS_Y, YMAX_NOMINAL + YMIN_NOMINAL - hw.y);
+ input_report_abs(dev, ABS_Y, synaptics_invert_y(hw.y));
}
input_report_abs(dev, ABS_PRESSURE, hw.z);
@@ -605,35 +1042,25 @@
input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1);
- input_report_key(dev, BTN_LEFT, hw.left);
- input_report_key(dev, BTN_RIGHT, hw.right);
-
if (SYN_CAP_MULTIFINGER(priv->capabilities)) {
input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
}
- if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
- input_report_key(dev, BTN_MIDDLE, hw.middle);
-
- if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) {
- input_report_key(dev, BTN_FORWARD, hw.up);
- input_report_key(dev, BTN_BACK, hw.down);
- }
-
- for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
- input_report_key(dev, BTN_0 + i, hw.ext_buttons & (1 << i));
+ synaptics_report_buttons(psmouse, &hw);
input_sync(dev);
}
-static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned char pkt_type)
+static int synaptics_validate_byte(struct psmouse *psmouse,
+ int idx, unsigned char pkt_type)
{
static const unsigned char newabs_mask[] = { 0xC8, 0x00, 0x00, 0xC8, 0x00 };
static const unsigned char newabs_rel_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 };
static const unsigned char newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 };
static const unsigned char oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 };
static const unsigned char oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 };
+ const char *packet = psmouse->packet;
if (idx < 0 || idx > 4)
return 0;
@@ -651,7 +1078,7 @@
return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx];
default:
- printk(KERN_ERR "synaptics: unknown packet type %d\n", pkt_type);
+ psmouse_err(psmouse, "unknown packet type %d\n", pkt_type);
return 0;
}
}
@@ -661,8 +1088,8 @@
int i;
for (i = 0; i < 5; i++)
- if (!synaptics_validate_byte(psmouse->packet, i, SYN_NEWABS_STRICT)) {
- printk(KERN_INFO "synaptics: using relaxed packet validation\n");
+ if (!synaptics_validate_byte(psmouse, i, SYN_NEWABS_STRICT)) {
+ psmouse_info(psmouse, "using relaxed packet validation\n");
return SYN_NEWABS_RELAXED;
}
@@ -687,46 +1114,56 @@
return PSMOUSE_FULL_PACKET;
}
- return synaptics_validate_byte(psmouse->packet, psmouse->pktcnt - 1, priv->pkt_type) ?
+ return synaptics_validate_byte(psmouse, psmouse->pktcnt - 1, priv->pkt_type) ?
PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
}
/*****************************************************************************
* Driver initialization/cleanup functions
****************************************************************************/
+static void set_abs_position_params(struct input_dev *dev,
+ struct synaptics_data *priv, int x_code,
+ int y_code)
+{
+ int x_min = priv->x_min ?: XMIN_NOMINAL;
+ int x_max = priv->x_max ?: XMAX_NOMINAL;
+ int y_min = priv->y_min ?: YMIN_NOMINAL;
+ int y_max = priv->y_max ?: YMAX_NOMINAL;
+ int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ?
+ SYN_REDUCED_FILTER_FUZZ : 0;
+
+ input_set_abs_params(dev, x_code, x_min, x_max, fuzz, 0);
+ input_set_abs_params(dev, y_code, y_min, y_max, fuzz, 0);
+ input_abs_set_res(dev, x_code, priv->x_res);
+ input_abs_set_res(dev, y_code, priv->y_res);
+}
+
static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
{
int i;
- int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ?
- SYN_REDUCED_FILTER_FUZZ : 0;
__set_bit(INPUT_PROP_POINTER, dev->propbit);
__set_bit(EV_ABS, dev->evbit);
- input_set_abs_params(dev, ABS_X,
- priv->x_min ?: XMIN_NOMINAL,
- priv->x_max ?: XMAX_NOMINAL,
- fuzz, 0);
- input_set_abs_params(dev, ABS_Y,
- priv->y_min ?: YMIN_NOMINAL,
- priv->y_max ?: YMAX_NOMINAL,
- fuzz, 0);
+ set_abs_position_params(dev, priv, ABS_X, ABS_Y);
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
- if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
+ if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
+ input_mt_init_slots(dev, 2);
+ set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
+ ABS_MT_POSITION_Y);
+ /* Image sensors can report per-contact pressure */
+ input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+ /* Image sensors can signal 4 and 5 finger clicks */
+ __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
+ __set_bit(BTN_TOOL_QUINTTAP, dev->keybit);
+ } else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
+ /* Non-image sensors with AGM use semi-mt */
__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
- input_set_abs_params(dev, ABS_MT_POSITION_X,
- priv->x_min ?: XMIN_NOMINAL,
- priv->x_max ?: XMAX_NOMINAL,
- fuzz, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_Y,
- priv->y_min ?: YMIN_NOMINAL,
- priv->y_max ?: YMAX_NOMINAL,
- fuzz, 0);
-
- input_abs_set_res(dev, ABS_MT_POSITION_X, priv->x_res);
- input_abs_set_res(dev, ABS_MT_POSITION_Y, priv->y_res);
+ set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
+ ABS_MT_POSITION_Y);
}
if (SYN_CAP_PALMDETECT(priv->capabilities))
@@ -759,9 +1196,6 @@
__clear_bit(REL_X, dev->relbit);
__clear_bit(REL_Y, dev->relbit);
- input_abs_set_res(dev, ABS_X, priv->x_res);
- input_abs_set_res(dev, ABS_Y, priv->y_res);
-
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
/* Clickpads report only left button */
@@ -793,21 +1227,21 @@
return -1;
if (retry > 1)
- printk(KERN_DEBUG "Synaptics reconnected after %d tries\n",
- retry);
+ psmouse_dbg(psmouse, "reconnected after %d tries\n", retry);
if (synaptics_query_hardware(psmouse)) {
- printk(KERN_ERR "Unable to query Synaptics hardware.\n");
+ psmouse_err(psmouse, "Unable to query device.\n");
return -1;
}
if (synaptics_set_absolute_mode(psmouse)) {
- printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
+ psmouse_err(psmouse, "Unable to initialize device.\n");
return -1;
}
if (synaptics_set_advanced_gesture_mode(psmouse)) {
- printk(KERN_ERR "Advanced gesture mode reconnect failed.\n");
+ psmouse_err(psmouse,
+ "Advanced gesture mode reconnect failed.\n");
return -1;
}
@@ -815,12 +1249,12 @@
old_priv.model_id != priv->model_id ||
old_priv.capabilities != priv->capabilities ||
old_priv.ext_cap != priv->ext_cap) {
- printk(KERN_ERR "Synaptics hardware appears to be different: "
- "id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n",
- old_priv.identity, priv->identity,
- old_priv.model_id, priv->model_id,
- old_priv.capabilities, priv->capabilities,
- old_priv.ext_cap, priv->ext_cap);
+ psmouse_err(psmouse,
+ "hardware appears to be different: id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n",
+ old_priv.identity, priv->identity,
+ old_priv.model_id, priv->model_id,
+ old_priv.capabilities, priv->capabilities,
+ old_priv.ext_cap, priv->ext_cap);
return -1;
}
@@ -901,7 +1335,8 @@
* just fine.
*/
if (broken_olpc_ec) {
- printk(KERN_INFO "synaptics: OLPC XO detected, not enabling Synaptics protocol.\n");
+ psmouse_info(psmouse,
+ "OLPC XO detected, not enabling Synaptics protocol.\n");
return -ENODEV;
}
@@ -912,26 +1347,28 @@
psmouse_reset(psmouse);
if (synaptics_query_hardware(psmouse)) {
- printk(KERN_ERR "Unable to query Synaptics hardware.\n");
+ psmouse_err(psmouse, "Unable to query device.\n");
goto init_fail;
}
if (synaptics_set_absolute_mode(psmouse)) {
- printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
+ psmouse_err(psmouse, "Unable to initialize device.\n");
goto init_fail;
}
if (synaptics_set_advanced_gesture_mode(psmouse)) {
- printk(KERN_ERR "Advanced gesture mode init failed.\n");
+ psmouse_err(psmouse, "Advanced gesture mode init failed.\n");
goto init_fail;
}
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
- printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
- SYN_ID_MODEL(priv->identity),
- SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
- priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
+ psmouse_info(psmouse,
+ "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
+ SYN_ID_MODEL(priv->identity),
+ SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
+ priv->model_id,
+ priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
set_input_params(psmouse->dev, priv);
@@ -963,8 +1400,9 @@
* the same rate as a standard PS/2 mouse).
*/
if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
- printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
+ psmouse_info(psmouse,
+ "Toshiba %s detected, limiting rate to 40pps.\n",
+ dmi_get_system_info(DMI_PRODUCT_NAME));
psmouse->rate = 40;
}
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index ca040aa..622aea8dd 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -74,6 +74,8 @@
* 2 0x04 reduced filtering firmware does less filtering on
* position data, driver should watch
* for noise.
+ * 2 0x08 image sensor image sensor tracks 5 fingers, but only
+ * reports 2.
* 2 0x20 report min query 0x0f gives min coord reported
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
@@ -82,6 +84,7 @@
#define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & 0x002000)
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
+#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
@@ -112,9 +115,18 @@
#define SYN_REDUCED_FILTER_FUZZ 8
/*
+ * A structure to describe which internal touchpad finger slots are being
+ * reported in raw packets.
+ */
+struct synaptics_mt_state {
+ int count; /* num fingers being tracked */
+ int sgm; /* which slot is reported by sgm pkt */
+ int agm; /* which slot is reported by agm pkt*/
+};
+
+/*
* A structure to describe the state of the touchpad hardware (buttons and pad)
*/
-
struct synaptics_hw_state {
int x;
int y;
@@ -127,6 +139,9 @@
unsigned int down:1;
unsigned char ext_buttons;
signed char scroll;
+
+ /* As reported in last AGM-CONTACT packets */
+ struct synaptics_mt_state mt_state;
};
struct synaptics_data {
@@ -146,7 +161,15 @@
struct serio *pt_port; /* Pass-through serio port */
- struct synaptics_hw_state mt; /* current gesture packet */
+ struct synaptics_mt_state mt_state; /* Current mt finger state */
+ bool mt_state_lost; /* mt_state may be incorrect */
+
+ /*
+ * Last received Advanced Gesture Mode (AGM) packet. An AGM packet
+ * contains position data for a second contact, at half resolution.
+ */
+ struct synaptics_hw_state agm;
+ bool agm_pending; /* new AGM packet received */
};
void synaptics_module_init(void);
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index cba3c84..4b755cb 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -570,7 +570,7 @@
"Requesting IRQ: %d\n", touch->client->irq);
ret = request_irq(touch->client->irq, synaptics_i2c_irq,
- IRQF_DISABLED|IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_EDGE_FALLING,
DRIVER_NAME, touch);
if (ret) {
dev_warn(&touch->client->dev,
@@ -619,7 +619,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int synaptics_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index b7ba459..4d4cd14 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -9,6 +9,7 @@
* the Free Software Foundation.
*/
+#include <linux/kref.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/poll.h>
@@ -33,15 +34,16 @@
unsigned int tail, head;
char name[16];
- unsigned int refcnt;
+ struct kref kref;
struct serio *serio;
struct miscdevice dev;
wait_queue_head_t wait;
- struct list_head list;
+ struct list_head client_list;
struct list_head node;
+ bool dead;
};
-struct serio_raw_list {
+struct serio_raw_client {
struct fasync_struct *fasync;
struct serio_raw *serio_raw;
struct list_head node;
@@ -49,7 +51,6 @@
static DEFINE_MUTEX(serio_raw_mutex);
static LIST_HEAD(serio_raw_list);
-static unsigned int serio_raw_no;
/*********************************************************************
* Interface with userspace (file operations) *
@@ -57,9 +58,9 @@
static int serio_raw_fasync(int fd, struct file *file, int on)
{
- struct serio_raw_list *list = file->private_data;
+ struct serio_raw_client *client = file->private_data;
- return fasync_helper(fd, file, on, &list->fasync);
+ return fasync_helper(fd, file, on, &client->fasync);
}
static struct serio_raw *serio_raw_locate(int minor)
@@ -77,8 +78,8 @@
static int serio_raw_open(struct inode *inode, struct file *file)
{
struct serio_raw *serio_raw;
- struct serio_raw_list *list;
- int retval = 0;
+ struct serio_raw_client *client;
+ int retval;
retval = mutex_lock_interruptible(&serio_raw_mutex);
if (retval)
@@ -90,60 +91,61 @@
goto out;
}
- if (!serio_raw->serio) {
+ if (serio_raw->dead) {
retval = -ENODEV;
goto out;
}
- list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL);
- if (!list) {
+ client = kzalloc(sizeof(struct serio_raw_client), GFP_KERNEL);
+ if (!client) {
retval = -ENOMEM;
goto out;
}
- list->serio_raw = serio_raw;
- file->private_data = list;
+ client->serio_raw = serio_raw;
+ file->private_data = client;
- serio_raw->refcnt++;
- list_add_tail(&list->node, &serio_raw->list);
+ kref_get(&serio_raw->kref);
+
+ serio_pause_rx(serio_raw->serio);
+ list_add_tail(&client->node, &serio_raw->client_list);
+ serio_continue_rx(serio_raw->serio);
out:
mutex_unlock(&serio_raw_mutex);
return retval;
}
-static int serio_raw_cleanup(struct serio_raw *serio_raw)
+static void serio_raw_free(struct kref *kref)
{
- if (--serio_raw->refcnt == 0) {
- misc_deregister(&serio_raw->dev);
- list_del_init(&serio_raw->node);
- kfree(serio_raw);
+ struct serio_raw *serio_raw =
+ container_of(kref, struct serio_raw, kref);
- return 1;
- }
-
- return 0;
+ put_device(&serio_raw->serio->dev);
+ kfree(serio_raw);
}
static int serio_raw_release(struct inode *inode, struct file *file)
{
- struct serio_raw_list *list = file->private_data;
- struct serio_raw *serio_raw = list->serio_raw;
+ struct serio_raw_client *client = file->private_data;
+ struct serio_raw *serio_raw = client->serio_raw;
- mutex_lock(&serio_raw_mutex);
+ serio_pause_rx(serio_raw->serio);
+ list_del(&client->node);
+ serio_continue_rx(serio_raw->serio);
- serio_raw_cleanup(serio_raw);
+ kfree(client);
- mutex_unlock(&serio_raw_mutex);
+ kref_put(&serio_raw->kref, serio_raw_free);
+
return 0;
}
-static int serio_raw_fetch_byte(struct serio_raw *serio_raw, char *c)
+static bool serio_raw_fetch_byte(struct serio_raw *serio_raw, char *c)
{
- unsigned long flags;
- int empty;
+ bool empty;
- spin_lock_irqsave(&serio_raw->serio->lock, flags);
+ serio_pause_rx(serio_raw->serio);
empty = serio_raw->head == serio_raw->tail;
if (!empty) {
@@ -151,30 +153,31 @@
serio_raw->tail = (serio_raw->tail + 1) % SERIO_RAW_QUEUE_LEN;
}
- spin_unlock_irqrestore(&serio_raw->serio->lock, flags);
+ serio_continue_rx(serio_raw->serio);
return !empty;
}
-static ssize_t serio_raw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+static ssize_t serio_raw_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
{
- struct serio_raw_list *list = file->private_data;
- struct serio_raw *serio_raw = list->serio_raw;
+ struct serio_raw_client *client = file->private_data;
+ struct serio_raw *serio_raw = client->serio_raw;
char uninitialized_var(c);
ssize_t retval = 0;
- if (!serio_raw->serio)
+ if (serio_raw->dead)
return -ENODEV;
if (serio_raw->head == serio_raw->tail && (file->f_flags & O_NONBLOCK))
return -EAGAIN;
- retval = wait_event_interruptible(list->serio_raw->wait,
- serio_raw->head != serio_raw->tail || !serio_raw->serio);
+ retval = wait_event_interruptible(serio_raw->wait,
+ serio_raw->head != serio_raw->tail || serio_raw->dead);
if (retval)
return retval;
- if (!serio_raw->serio)
+ if (serio_raw->dead)
return -ENODEV;
while (retval < count && serio_raw_fetch_byte(serio_raw, &c)) {
@@ -186,9 +189,11 @@
return retval;
}
-static ssize_t serio_raw_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
- struct serio_raw_list *list = file->private_data;
+ struct serio_raw_client *client = file->private_data;
+ struct serio_raw *serio_raw = client->serio_raw;
ssize_t written = 0;
int retval;
unsigned char c;
@@ -197,7 +202,7 @@
if (retval)
return retval;
- if (!list->serio_raw->serio) {
+ if (serio_raw->dead) {
retval = -ENODEV;
goto out;
}
@@ -210,7 +215,7 @@
retval = -EFAULT;
goto out;
}
- if (serio_write(list->serio_raw->serio, c)) {
+ if (serio_write(serio_raw->serio, c)) {
retval = -EIO;
goto out;
}
@@ -224,46 +229,49 @@
static unsigned int serio_raw_poll(struct file *file, poll_table *wait)
{
- struct serio_raw_list *list = file->private_data;
+ struct serio_raw_client *client = file->private_data;
+ struct serio_raw *serio_raw = client->serio_raw;
+ unsigned int mask;
- poll_wait(file, &list->serio_raw->wait, wait);
+ poll_wait(file, &serio_raw->wait, wait);
- if (list->serio_raw->head != list->serio_raw->tail)
+ mask = serio_raw->dead ? POLLHUP | POLLERR : POLLOUT | POLLWRNORM;
+ if (serio_raw->head != serio_raw->tail)
return POLLIN | POLLRDNORM;
return 0;
}
static const struct file_operations serio_raw_fops = {
- .owner = THIS_MODULE,
- .open = serio_raw_open,
- .release = serio_raw_release,
- .read = serio_raw_read,
- .write = serio_raw_write,
- .poll = serio_raw_poll,
- .fasync = serio_raw_fasync,
- .llseek = noop_llseek,
+ .owner = THIS_MODULE,
+ .open = serio_raw_open,
+ .release = serio_raw_release,
+ .read = serio_raw_read,
+ .write = serio_raw_write,
+ .poll = serio_raw_poll,
+ .fasync = serio_raw_fasync,
+ .llseek = noop_llseek,
};
/*********************************************************************
- * Interface with serio port *
+ * Interface with serio port *
*********************************************************************/
static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data,
unsigned int dfl)
{
struct serio_raw *serio_raw = serio_get_drvdata(serio);
- struct serio_raw_list *list;
+ struct serio_raw_client *client;
unsigned int head = serio_raw->head;
- /* we are holding serio->lock here so we are prootected */
+ /* we are holding serio->lock here so we are protected */
serio_raw->queue[head] = data;
head = (head + 1) % SERIO_RAW_QUEUE_LEN;
if (likely(head != serio_raw->tail)) {
serio_raw->head = head;
- list_for_each_entry(list, &serio_raw->list, node)
- kill_fasync(&list->fasync, SIGIO, POLL_IN);
+ list_for_each_entry(client, &serio_raw->client_list, node)
+ kill_fasync(&client->fasync, SIGIO, POLL_IN);
wake_up_interruptible(&serio_raw->wait);
}
@@ -272,29 +280,37 @@
static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
{
+ static atomic_t serio_raw_no = ATOMIC_INIT(0);
struct serio_raw *serio_raw;
int err;
- if (!(serio_raw = kzalloc(sizeof(struct serio_raw), GFP_KERNEL))) {
- printk(KERN_ERR "serio_raw.c: can't allocate memory for a device\n");
+ serio_raw = kzalloc(sizeof(struct serio_raw), GFP_KERNEL);
+ if (!serio_raw) {
+ dev_dbg(&serio->dev, "can't allocate memory for a device\n");
return -ENOMEM;
}
- mutex_lock(&serio_raw_mutex);
-
- snprintf(serio_raw->name, sizeof(serio_raw->name), "serio_raw%d", serio_raw_no++);
- serio_raw->refcnt = 1;
- serio_raw->serio = serio;
- INIT_LIST_HEAD(&serio_raw->list);
+ snprintf(serio_raw->name, sizeof(serio_raw->name),
+ "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no) - 1);
+ kref_init(&serio_raw->kref);
+ INIT_LIST_HEAD(&serio_raw->client_list);
init_waitqueue_head(&serio_raw->wait);
+ serio_raw->serio = serio;
+ get_device(&serio->dev);
+
serio_set_drvdata(serio, serio_raw);
err = serio_open(serio, drv);
if (err)
- goto out_free;
+ goto err_free;
+
+ err = mutex_lock_killable(&serio_raw_mutex);
+ if (err)
+ goto err_close;
list_add_tail(&serio_raw->node, &serio_raw_list);
+ mutex_unlock(&serio_raw_mutex);
serio_raw->dev.minor = PSMOUSE_MINOR;
serio_raw->dev.name = serio_raw->name;
@@ -308,23 +324,23 @@
}
if (err) {
- printk(KERN_INFO "serio_raw: failed to register raw access device for %s\n",
+ dev_err(&serio->dev,
+ "failed to register raw access device for %s\n",
serio->phys);
- goto out_close;
+ goto err_unlink;
}
- printk(KERN_INFO "serio_raw: raw access enabled on %s (%s, minor %d)\n",
- serio->phys, serio_raw->name, serio_raw->dev.minor);
- goto out;
+ dev_info(&serio->dev, "raw access enabled on %s (%s, minor %d)\n",
+ serio->phys, serio_raw->name, serio_raw->dev.minor);
+ return 0;
-out_close:
- serio_close(serio);
+err_unlink:
list_del_init(&serio_raw->node);
-out_free:
+err_close:
+ serio_close(serio);
+err_free:
serio_set_drvdata(serio, NULL);
- kfree(serio_raw);
-out:
- mutex_unlock(&serio_raw_mutex);
+ kref_put(&serio_raw->kref, serio_raw_free);
return err;
}
@@ -334,7 +350,8 @@
struct serio_driver *drv = serio->drv;
if (!drv || !serio_raw) {
- printk(KERN_DEBUG "serio_raw: reconnect request, but serio is disconnected, ignoring...\n");
+ dev_dbg(&serio->dev,
+ "reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
@@ -345,22 +362,40 @@
return 0;
}
+/*
+ * Wake up users waiting for IO so they can disconnect from
+ * dead device.
+ */
+static void serio_raw_hangup(struct serio_raw *serio_raw)
+{
+ struct serio_raw_client *client;
+
+ serio_pause_rx(serio_raw->serio);
+ list_for_each_entry(client, &serio_raw->client_list, node)
+ kill_fasync(&client->fasync, SIGIO, POLL_HUP);
+ serio_continue_rx(serio_raw->serio);
+
+ wake_up_interruptible(&serio_raw->wait);
+}
+
+
static void serio_raw_disconnect(struct serio *serio)
{
- struct serio_raw *serio_raw;
+ struct serio_raw *serio_raw = serio_get_drvdata(serio);
+
+ misc_deregister(&serio_raw->dev);
mutex_lock(&serio_raw_mutex);
+ serio_raw->dead = true;
+ list_del_init(&serio_raw->node);
+ mutex_unlock(&serio_raw_mutex);
- serio_raw = serio_get_drvdata(serio);
+ serio_raw_hangup(serio_raw);
serio_close(serio);
+ kref_put(&serio_raw->kref, serio_raw_free);
+
serio_set_drvdata(serio, NULL);
-
- serio_raw->serio = NULL;
- if (!serio_raw_cleanup(serio_raw))
- wake_up_interruptible(&serio_raw->wait);
-
- mutex_unlock(&serio_raw_mutex);
}
static struct serio_device_id serio_raw_serio_ids[] = {
@@ -391,7 +426,7 @@
.connect = serio_raw_connect,
.reconnect = serio_raw_reconnect,
.disconnect = serio_raw_disconnect,
- .manual_bind = 1,
+ .manual_bind = true,
};
static int __init serio_raw_init(void)
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 23317bd..0783864 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -11,7 +11,7 @@
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-2009 Ping Cheng <pingc@wacom.com>
+ * Copyright (c) 2002-2011 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
@@ -93,7 +93,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.52"
+#define DRIVER_VERSION "v1.53"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom tablet driver"
#define DRIVER_LICENSE "GPL"
@@ -114,6 +114,12 @@
struct mutex lock;
bool open;
char phys[32];
+ struct wacom_led {
+ u8 select[2]; /* status led selector (0..3) */
+ u8 llv; /* status led brightness no button (1..127) */
+ u8 hlv; /* status led brightness button pressed (1..127) */
+ u8 img_lum; /* OLED matrix display brightness */
+ } led;
};
extern const struct usb_device_id wacom_ids[];
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 958b4eb..1c1b7b4 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -48,27 +48,49 @@
/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+
#define WAC_HID_FEATURE_REPORT 0x03
#define WAC_MSG_RETRIES 5
-static int usb_get_report(struct usb_interface *intf, unsigned char type,
- unsigned char id, void *buf, int size)
+#define WAC_CMD_LED_CONTROL 0x20
+#define WAC_CMD_ICON_START 0x21
+#define WAC_CMD_ICON_XFER 0x23
+#define WAC_CMD_RETRIES 10
+
+static int wacom_get_report(struct usb_interface *intf, u8 type, u8 id,
+ void *buf, size_t size, unsigned int retries)
{
- return usb_control_msg(interface_to_usbdev(intf),
- usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
- USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
- buf, size, 100);
+ struct usb_device *dev = interface_to_usbdev(intf);
+ int retval;
+
+ do {
+ retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_REPORT,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ (type << 8) + id,
+ intf->altsetting[0].desc.bInterfaceNumber,
+ buf, size, 100);
+ } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries);
+
+ return retval;
}
-static int usb_set_report(struct usb_interface *intf, unsigned char type,
- unsigned char id, void *buf, int size)
+static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id,
+ void *buf, size_t size, unsigned int retries)
{
- return usb_control_msg(interface_to_usbdev(intf),
- usb_sndctrlpipe(interface_to_usbdev(intf), 0),
- USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
- buf, size, 1000);
+ struct usb_device *dev = interface_to_usbdev(intf);
+ int retval;
+
+ do {
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ USB_REQ_SET_REPORT,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ (type << 8) + id,
+ intf->altsetting[0].desc.bInterfaceNumber,
+ buf, size, 1000);
+ } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries);
+
+ return retval;
}
static void wacom_sys_irq(struct urb *urb)
@@ -319,23 +341,23 @@
rep_data[2] = 0;
rep_data[3] = 0;
report_id = 3;
- error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
- report_id, rep_data, 4);
+ error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
+ report_id, rep_data, 4, 1);
if (error >= 0)
- error = usb_get_report(intf,
- WAC_HID_FEATURE_REPORT, report_id,
- rep_data, 4);
+ error = wacom_get_report(intf,
+ WAC_HID_FEATURE_REPORT,
+ report_id, rep_data, 4, 1);
} while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES);
} else if (features->type != TABLETPC) {
do {
rep_data[0] = 2;
rep_data[1] = 2;
- error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
- report_id, rep_data, 2);
+ error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
+ report_id, rep_data, 2, 1);
if (error >= 0)
- error = usb_get_report(intf,
- WAC_HID_FEATURE_REPORT, report_id,
- rep_data, 2);
+ error = wacom_get_report(intf,
+ WAC_HID_FEATURE_REPORT,
+ report_id, rep_data, 2, 1);
} while ((error < 0 || rep_data[1] != 2) && limit++ < WAC_MSG_RETRIES);
}
@@ -454,6 +476,275 @@
}
}
+static int wacom_led_control(struct wacom *wacom)
+{
+ unsigned char *buf;
+ int retval, led = 0;
+
+ buf = kzalloc(9, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (wacom->wacom_wac.features.type == WACOM_21UX2)
+ led = (wacom->led.select[1] << 4) | 0x40;
+
+ led |= wacom->led.select[0] | 0x4;
+
+ buf[0] = WAC_CMD_LED_CONTROL;
+ buf[1] = led;
+ buf[2] = wacom->led.llv;
+ buf[3] = wacom->led.hlv;
+ buf[4] = wacom->led.img_lum;
+
+ retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL,
+ buf, 9, WAC_CMD_RETRIES);
+ kfree(buf);
+
+ return retval;
+}
+
+static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img)
+{
+ unsigned char *buf;
+ int i, retval;
+
+ buf = kzalloc(259, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* Send 'start' command */
+ buf[0] = WAC_CMD_ICON_START;
+ buf[1] = 1;
+ retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START,
+ buf, 2, WAC_CMD_RETRIES);
+ if (retval < 0)
+ goto out;
+
+ buf[0] = WAC_CMD_ICON_XFER;
+ buf[1] = button_id & 0x07;
+ for (i = 0; i < 4; i++) {
+ buf[2] = i;
+ memcpy(buf + 3, img + i * 256, 256);
+
+ retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_XFER,
+ buf, 259, WAC_CMD_RETRIES);
+ if (retval < 0)
+ break;
+ }
+
+ /* Send 'stop' */
+ buf[0] = WAC_CMD_ICON_START;
+ buf[1] = 0;
+ wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START,
+ buf, 2, WAC_CMD_RETRIES);
+
+out:
+ kfree(buf);
+ return retval;
+}
+
+static ssize_t wacom_led_select_store(struct device *dev, int set_id,
+ const char *buf, size_t count)
+{
+ struct wacom *wacom = dev_get_drvdata(dev);
+ unsigned int id;
+ int err;
+
+ err = kstrtouint(buf, 10, &id);
+ if (err)
+ return err;
+
+ mutex_lock(&wacom->lock);
+
+ wacom->led.select[set_id] = id & 0x3;
+ err = wacom_led_control(wacom);
+
+ mutex_unlock(&wacom->lock);
+
+ return err < 0 ? err : count;
+}
+
+#define DEVICE_LED_SELECT_ATTR(SET_ID) \
+static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ return wacom_led_select_store(dev, SET_ID, buf, count); \
+} \
+static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct wacom *wacom = dev_get_drvdata(dev); \
+ return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]); \
+} \
+static DEVICE_ATTR(status_led##SET_ID##_select, S_IWUSR | S_IRUSR, \
+ wacom_led##SET_ID##_select_show, \
+ wacom_led##SET_ID##_select_store)
+
+DEVICE_LED_SELECT_ATTR(0);
+DEVICE_LED_SELECT_ATTR(1);
+
+static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest,
+ const char *buf, size_t count)
+{
+ unsigned int value;
+ int err;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ mutex_lock(&wacom->lock);
+
+ *dest = value & 0x7f;
+ err = wacom_led_control(wacom);
+
+ mutex_unlock(&wacom->lock);
+
+ return err < 0 ? err : count;
+}
+
+#define DEVICE_LUMINANCE_ATTR(name, field) \
+static ssize_t wacom_##name##_luminance_store(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ struct wacom *wacom = dev_get_drvdata(dev); \
+ \
+ return wacom_luminance_store(wacom, &wacom->led.field, \
+ buf, count); \
+} \
+static DEVICE_ATTR(name##_luminance, S_IWUSR, \
+ NULL, wacom_##name##_luminance_store)
+
+DEVICE_LUMINANCE_ATTR(status0, llv);
+DEVICE_LUMINANCE_ATTR(status1, hlv);
+DEVICE_LUMINANCE_ATTR(buttons, img_lum);
+
+static ssize_t wacom_button_image_store(struct device *dev, int button_id,
+ const char *buf, size_t count)
+{
+ struct wacom *wacom = dev_get_drvdata(dev);
+ int err;
+
+ if (count != 1024)
+ return -EINVAL;
+
+ mutex_lock(&wacom->lock);
+
+ err = wacom_led_putimage(wacom, button_id, buf);
+
+ mutex_unlock(&wacom->lock);
+
+ return err < 0 ? err : count;
+}
+
+#define DEVICE_BTNIMG_ATTR(BUTTON_ID) \
+static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ return wacom_button_image_store(dev, BUTTON_ID, buf, count); \
+} \
+static DEVICE_ATTR(button##BUTTON_ID##_rawimg, S_IWUSR, \
+ NULL, wacom_btnimg##BUTTON_ID##_store)
+
+DEVICE_BTNIMG_ATTR(0);
+DEVICE_BTNIMG_ATTR(1);
+DEVICE_BTNIMG_ATTR(2);
+DEVICE_BTNIMG_ATTR(3);
+DEVICE_BTNIMG_ATTR(4);
+DEVICE_BTNIMG_ATTR(5);
+DEVICE_BTNIMG_ATTR(6);
+DEVICE_BTNIMG_ATTR(7);
+
+static struct attribute *cintiq_led_attrs[] = {
+ &dev_attr_status_led0_select.attr,
+ &dev_attr_status_led1_select.attr,
+ NULL
+};
+
+static struct attribute_group cintiq_led_attr_group = {
+ .name = "wacom_led",
+ .attrs = cintiq_led_attrs,
+};
+
+static struct attribute *intuos4_led_attrs[] = {
+ &dev_attr_status0_luminance.attr,
+ &dev_attr_status1_luminance.attr,
+ &dev_attr_status_led0_select.attr,
+ &dev_attr_buttons_luminance.attr,
+ &dev_attr_button0_rawimg.attr,
+ &dev_attr_button1_rawimg.attr,
+ &dev_attr_button2_rawimg.attr,
+ &dev_attr_button3_rawimg.attr,
+ &dev_attr_button4_rawimg.attr,
+ &dev_attr_button5_rawimg.attr,
+ &dev_attr_button6_rawimg.attr,
+ &dev_attr_button7_rawimg.attr,
+ NULL
+};
+
+static struct attribute_group intuos4_led_attr_group = {
+ .name = "wacom_led",
+ .attrs = intuos4_led_attrs,
+};
+
+static int wacom_initialize_leds(struct wacom *wacom)
+{
+ int error;
+
+ /* Initialize default values */
+ switch (wacom->wacom_wac.features.type) {
+ case INTUOS4:
+ case INTUOS4L:
+ wacom->led.select[0] = 0;
+ wacom->led.select[1] = 0;
+ wacom->led.llv = 10;
+ wacom->led.hlv = 20;
+ wacom->led.img_lum = 10;
+ error = sysfs_create_group(&wacom->intf->dev.kobj,
+ &intuos4_led_attr_group);
+ break;
+
+ case WACOM_21UX2:
+ wacom->led.select[0] = 0;
+ wacom->led.select[1] = 0;
+ wacom->led.llv = 0;
+ wacom->led.hlv = 0;
+ wacom->led.img_lum = 0;
+
+ error = sysfs_create_group(&wacom->intf->dev.kobj,
+ &cintiq_led_attr_group);
+ break;
+
+ default:
+ return 0;
+ }
+
+ if (error) {
+ dev_err(&wacom->intf->dev,
+ "cannot create sysfs group err: %d\n", error);
+ return error;
+ }
+ wacom_led_control(wacom);
+
+ return 0;
+}
+
+static void wacom_destroy_leds(struct wacom *wacom)
+{
+ switch (wacom->wacom_wac.features.type) {
+ case INTUOS4:
+ case INTUOS4L:
+ sysfs_remove_group(&wacom->intf->dev.kobj,
+ &intuos4_led_attr_group);
+ break;
+
+ case WACOM_21UX2:
+ sysfs_remove_group(&wacom->intf->dev.kobj,
+ &cintiq_led_attr_group);
+ break;
+ }
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
@@ -542,16 +833,21 @@
wacom->irq->transfer_dma = wacom->data_dma;
wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- error = input_register_device(input_dev);
+ error = wacom_initialize_leds(wacom);
if (error)
goto fail4;
+ error = input_register_device(input_dev);
+ if (error)
+ goto fail5;
+
/* Note that if query fails it is not a hard failure */
wacom_query_tablet_data(intf, features);
usb_set_intfdata(intf, wacom);
return 0;
+ fail5: wacom_destroy_leds(wacom);
fail4: wacom_remove_shared_data(wacom_wac);
fail3: usb_free_urb(wacom->irq);
fail2: usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
@@ -568,6 +864,7 @@
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->wacom_wac.input);
+ wacom_destroy_leds(wacom);
usb_free_urb(wacom->irq);
usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
wacom->wacom_wac.data, wacom->data_dma);
@@ -590,17 +887,16 @@
{
struct wacom *wacom = usb_get_intfdata(intf);
struct wacom_features *features = &wacom->wacom_wac.features;
- int rv;
+ int rv = 0;
mutex_lock(&wacom->lock);
/* switch to wacom mode first */
wacom_query_tablet_data(intf, features);
+ wacom_led_control(wacom);
- if (wacom->open)
- rv = usb_submit_urb(wacom->irq, GFP_NOIO);
- else
- rv = 0;
+ if (wacom->open && usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
+ rv = -EIO;
mutex_unlock(&wacom->lock);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 9dea718..da0d8761e 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -874,7 +874,15 @@
x = le16_to_cpup((__le16 *)&data[2]);
y = le16_to_cpup((__le16 *)&data[4]);
p = le16_to_cpup((__le16 *)&data[6]);
- d = data[8];
+ /*
+ * Convert distance from out prox to distance from tablet.
+ * distance will be greater than distance_max once
+ * touching and applying pressure; do not report negative
+ * distance.
+ */
+ if (data[8] <= wacom->features.distance_max)
+ d = wacom->features.distance_max - data[8];
+
pen = data[1] & 0x01;
btn1 = data[1] & 0x02;
btn2 = data[1] & 0x04;
@@ -1030,8 +1038,6 @@
features->y_max <<= 5;
features->x_fuzz <<= 5;
features->y_fuzz <<= 5;
- features->pressure_max = 256;
- features->pressure_fuzz = 16;
features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
}
}
@@ -1241,14 +1247,14 @@
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, features->y_max,
features->y_fuzz, 0);
- input_set_abs_params(input_dev, ABS_MT_PRESSURE,
- 0, features->pressure_max,
- features->pressure_fuzz, 0);
} else if (features->device_type == BTN_TOOL_PEN) {
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0,
+ features->distance_max,
+ 0, 0);
}
break;
}
@@ -1469,37 +1475,37 @@
31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD0 =
{ "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD1 =
{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD2 =
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD3 =
- { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD4 =
{ "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD5 =
- { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD6 =
{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD7 =
{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD8 =
- { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xDA =
{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static struct wacom_features wacom_features_0xDB =
- { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023,
- 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x6004 =
{ "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index cabd9e5..3488ffe 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -651,6 +651,18 @@
To compile this driver as a module, choose M here: the
module will be called touchit213.
+config TOUCHSCREEN_TSC_SERIO
+ tristate "TSC-10/25/40 serial touchscreen support"
+ select SERIO
+ help
+ Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
+ to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc40.
+
config TOUCHSCREEN_TSC2005
tristate "TSC2005 based touchscreens"
depends on SPI_MASTER && GENERIC_HARDIRQS
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 282d6f7..f957676 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -46,6 +46,7 @@
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o
obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c
index 4e4e58c..c789b974 100644
--- a/drivers/input/touchscreen/ad7879-i2c.c
+++ b/drivers/input/touchscreen/ad7879-i2c.c
@@ -16,7 +16,7 @@
#define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ad7879_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -36,9 +36,9 @@
return 0;
}
+#endif
static SIMPLE_DEV_PM_OPS(ad7879_i2c_pm, ad7879_i2c_suspend, ad7879_i2c_resume);
-#endif
/* All registers are word-sized.
* AD7879 uses a high-byte first convention.
@@ -119,9 +119,7 @@
.driver = {
.name = "ad7879",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &ad7879_i2c_pm,
-#endif
},
.probe = ad7879_i2c_probe,
.remove = __devexit_p(ad7879_i2c_remove),
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index f5d6685..a596c27 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -910,12 +910,17 @@
for (i = 0; i < data->info.object_num; i++) {
object = data->object_table + i;
- count += sprintf(buf + count,
- "Object Table Element %d(Type %d)\n",
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "Object[%d] (Type %d)\n",
i + 1, object->type);
+ if (count >= PAGE_SIZE)
+ return PAGE_SIZE - 1;
if (!mxt_object_readable(object->type)) {
- count += sprintf(buf + count, "\n");
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "\n");
+ if (count >= PAGE_SIZE)
+ return PAGE_SIZE - 1;
continue;
}
@@ -925,11 +930,15 @@
if (error)
return error;
- count += sprintf(buf + count,
- " Byte %d: 0x%x (%d)\n", j, val, val);
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "\t[%2d]: %02x (%d)\n", j, val, val);
+ if (count >= PAGE_SIZE)
+ return PAGE_SIZE - 1;
}
- count += sprintf(buf + count, "\n");
+ count += snprintf(buf + count, PAGE_SIZE - count, "\n");
+ if (count >= PAGE_SIZE)
+ return PAGE_SIZE - 1;
}
return count;
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 432c69b..122a878 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -229,7 +229,7 @@
goto err_release_mem;
}
- err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED,
+ err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0,
pdev->dev.driver->name, ts_dev);
if (err) {
dev_err(&pdev->dev, "failed to allocate irq.\n");
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 211811a..6107e56 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -396,14 +396,14 @@
set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
- IRQF_SHARED | IRQF_DISABLED, "h3600_action", ts->dev)) {
+ IRQF_SHARED, "h3600_action", ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
err = -EBUSY;
goto fail1;
}
if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
- IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", ts->dev)) {
+ IRQF_SHARED, "h3600_suspend", ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
err = -EBUSY;
goto fail2;
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index dd4e8f0..639a604 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -93,7 +93,7 @@
hp680_ts_dev->phys = "hp680_ts/input0";
if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
- IRQF_DISABLED, MODNAME, 0) < 0) {
+ 0, MODNAME, 0) < 0) {
printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
HP680_TS_IRQ);
err = -EBUSY;
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 4b0a061..50076c2 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -127,7 +127,7 @@
error = request_irq(IRQ_GPIO9,
jornada720_ts_interrupt,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
+ IRQF_TRIGGER_RISING,
"HP7XX Touchscreen driver", pdev);
if (error) {
printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n");
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index dcf803f..0a484ed 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -276,7 +276,7 @@
input_set_drvdata(input, tsc);
error = request_irq(tsc->irq, lpc32xx_ts_interrupt,
- IRQF_DISABLED, pdev->name, tsc);
+ 0, pdev->name, tsc);
if (error) {
dev_err(&pdev->dev, "failed requesting interrupt\n");
goto err_put_clock;
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index c5bc62d..ede0274 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -35,7 +35,7 @@
struct mc13783_ts_priv {
struct input_dev *idev;
- struct mc13783 *mc13783;
+ struct mc13xxx *mc13xxx;
struct delayed_work work;
struct workqueue_struct *workq;
unsigned int sample[4];
@@ -45,7 +45,7 @@
{
struct mc13783_ts_priv *priv = data;
- mc13783_irq_ack(priv->mc13783, irq);
+ mc13xxx_irq_ack(priv->mc13xxx, irq);
/*
* Kick off reading coordinates. Note that if work happens already
@@ -121,10 +121,10 @@
{
struct mc13783_ts_priv *priv =
container_of(work, struct mc13783_ts_priv, work.work);
- unsigned int mode = MC13783_ADC_MODE_TS;
+ unsigned int mode = MC13XXX_ADC_MODE_TS;
unsigned int channel = 12;
- if (mc13783_adc_do_conversion(priv->mc13783,
+ if (mc13xxx_adc_do_conversion(priv->mc13xxx,
mode, channel, priv->sample) == 0)
mc13783_ts_report_sample(priv);
}
@@ -134,21 +134,21 @@
struct mc13783_ts_priv *priv = input_get_drvdata(dev);
int ret;
- mc13783_lock(priv->mc13783);
+ mc13xxx_lock(priv->mc13xxx);
- mc13783_irq_ack(priv->mc13783, MC13783_IRQ_TS);
+ mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS);
- ret = mc13783_irq_request(priv->mc13783, MC13783_IRQ_TS,
+ ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS,
mc13783_ts_handler, MC13783_TS_NAME, priv);
if (ret)
goto out;
- ret = mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
- MC13783_ADC0_TSMOD_MASK, MC13783_ADC0_TSMOD0);
+ ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+ MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0);
if (ret)
- mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
+ mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
out:
- mc13783_unlock(priv->mc13783);
+ mc13xxx_unlock(priv->mc13xxx);
return ret;
}
@@ -156,11 +156,11 @@
{
struct mc13783_ts_priv *priv = input_get_drvdata(dev);
- mc13783_lock(priv->mc13783);
- mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
- MC13783_ADC0_TSMOD_MASK, 0);
- mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
- mc13783_unlock(priv->mc13783);
+ mc13xxx_lock(priv->mc13xxx);
+ mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+ MC13XXX_ADC0_TSMOD_MASK, 0);
+ mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
+ mc13xxx_unlock(priv->mc13xxx);
cancel_delayed_work_sync(&priv->work);
}
@@ -177,7 +177,7 @@
goto err_free_mem;
INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
- priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+ priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
priv->idev = idev;
/*
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
index c7f9ceb..4c012fb 100644
--- a/drivers/input/touchscreen/penmount.c
+++ b/drivers/input/touchscreen/penmount.c
@@ -2,6 +2,7 @@
* Penmount serial touchscreen driver
*
* Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ * Copyright (c) 2011 John Sung <penmount.touch@gmail.com>
*
* Based on ELO driver (drivers/input/touchscreen/elo.c)
* Copyright (c) 2004 Vojtech Pavlik
@@ -18,12 +19,14 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/serio.h>
#include <linux/init.h>
-#define DRIVER_DESC "Penmount serial touchscreen driver"
+#define DRIVER_DESC "PenMount serial touchscreen driver"
MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_AUTHOR("John Sung <penmount.touch@gmail.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
@@ -31,7 +34,19 @@
* Definitions & global arrays.
*/
-#define PM_MAX_LENGTH 5
+#define PM_MAX_LENGTH 6
+#define PM_MAX_MTSLOT 16
+#define PM_3000_MTSLOT 2
+#define PM_6250_MTSLOT 12
+
+/*
+ * Multi-touch slot
+ */
+
+struct mt_slot {
+ unsigned short x, y;
+ bool active; /* is the touch valid? */
+};
/*
* Per-touchscreen data.
@@ -43,25 +58,119 @@
int idx;
unsigned char data[PM_MAX_LENGTH];
char phys[32];
+ unsigned char packetsize;
+ unsigned char maxcontacts;
+ struct mt_slot slots[PM_MAX_MTSLOT];
+ void (*parse_packet)(struct pm *);
};
+/*
+ * pm_mtevent() sends mt events and also emulates pointer movement
+ */
+
+static void pm_mtevent(struct pm *pm, struct input_dev *input)
+{
+ int i;
+
+ for (i = 0; i < pm->maxcontacts; ++i) {
+ input_mt_slot(input, i);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER,
+ pm->slots[i].active);
+ if (pm->slots[i].active) {
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y);
+ }
+ }
+
+ input_mt_report_pointer_emulation(input, true);
+ input_sync(input);
+}
+
+/*
+ * pm_checkpacket() checks if data packet is valid
+ */
+
+static bool pm_checkpacket(unsigned char *packet)
+{
+ int total = 0;
+ int i;
+
+ for (i = 0; i < 5; i++)
+ total += packet[i];
+
+ return packet[5] == (unsigned char)~(total & 0xff);
+}
+
+static void pm_parse_9000(struct pm *pm)
+{
+ struct input_dev *dev = pm->dev;
+
+ if ((pm->data[0] & 0x80) && pm->packetsize == ++pm->idx) {
+ input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]);
+ input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]);
+ input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
+ input_sync(dev);
+ pm->idx = 0;
+ }
+}
+
+static void pm_parse_6000(struct pm *pm)
+{
+ struct input_dev *dev = pm->dev;
+
+ if ((pm->data[0] & 0xbf) == 0x30 && pm->packetsize == ++pm->idx) {
+ if (pm_checkpacket(pm->data)) {
+ input_report_abs(dev, ABS_X,
+ pm->data[2] * 256 + pm->data[1]);
+ input_report_abs(dev, ABS_Y,
+ pm->data[4] * 256 + pm->data[3]);
+ input_report_key(dev, BTN_TOUCH, pm->data[0] & 0x40);
+ input_sync(dev);
+ }
+ pm->idx = 0;
+ }
+}
+
+static void pm_parse_3000(struct pm *pm)
+{
+ struct input_dev *dev = pm->dev;
+
+ if ((pm->data[0] & 0xce) == 0x40 && pm->packetsize == ++pm->idx) {
+ if (pm_checkpacket(pm->data)) {
+ int slotnum = pm->data[0] & 0x0f;
+ pm->slots[slotnum].active = pm->data[0] & 0x30;
+ pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1];
+ pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3];
+ pm_mtevent(pm, dev);
+ }
+ pm->idx = 0;
+ }
+}
+
+static void pm_parse_6250(struct pm *pm)
+{
+ struct input_dev *dev = pm->dev;
+
+ if ((pm->data[0] & 0xb0) == 0x30 && pm->packetsize == ++pm->idx) {
+ if (pm_checkpacket(pm->data)) {
+ int slotnum = pm->data[0] & 0x0f;
+ pm->slots[slotnum].active = pm->data[0] & 0x40;
+ pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1];
+ pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3];
+ pm_mtevent(pm, dev);
+ }
+ pm->idx = 0;
+ }
+}
+
static irqreturn_t pm_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
struct pm *pm = serio_get_drvdata(serio);
- struct input_dev *dev = pm->dev;
pm->data[pm->idx] = data;
- if (pm->data[0] & 0x80) {
- if (PM_MAX_LENGTH == ++pm->idx) {
- input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]);
- input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]);
- input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
- input_sync(dev);
- pm->idx = 0;
- }
- }
+ pm->parse_packet(pm);
return IRQ_HANDLED;
}
@@ -74,17 +183,17 @@
{
struct pm *pm = serio_get_drvdata(serio);
- input_get_device(pm->dev);
- input_unregister_device(pm->dev);
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- input_put_device(pm->dev);
+
+ input_unregister_device(pm->dev);
kfree(pm);
+
+ serio_set_drvdata(serio, NULL);
}
/*
* pm_connect() is the routine that is called when someone adds a
- * new serio device that supports Gunze protocol and registers it as
+ * new serio device that supports PenMount protocol and registers it as
* an input device.
*/
@@ -92,6 +201,7 @@
{
struct pm *pm;
struct input_dev *input_dev;
+ int max_x, max_y;
int err;
pm = kzalloc(sizeof(struct pm), GFP_KERNEL);
@@ -104,8 +214,9 @@
pm->serio = serio;
pm->dev = input_dev;
snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
+ pm->maxcontacts = 1;
- input_dev->name = "Penmount Serial TouchScreen";
+ input_dev->name = "PenMount Serial TouchScreen";
input_dev->phys = pm->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_PENMOUNT;
@@ -113,10 +224,52 @@
input_dev->id.version = 0x0100;
input_dev->dev.parent = &serio->dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0);
- input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ switch (serio->id.id) {
+ default:
+ case 0:
+ pm->packetsize = 5;
+ pm->parse_packet = pm_parse_9000;
+ input_dev->id.product = 0x9000;
+ max_x = max_y = 0x3ff;
+ break;
+
+ case 1:
+ pm->packetsize = 6;
+ pm->parse_packet = pm_parse_6000;
+ input_dev->id.product = 0x6000;
+ max_x = max_y = 0x3ff;
+ break;
+
+ case 2:
+ pm->packetsize = 6;
+ pm->parse_packet = pm_parse_3000;
+ input_dev->id.product = 0x3000;
+ max_x = max_y = 0x7ff;
+ pm->maxcontacts = PM_3000_MTSLOT;
+ break;
+
+ case 3:
+ pm->packetsize = 6;
+ pm->parse_packet = pm_parse_6250;
+ input_dev->id.product = 0x6250;
+ max_x = max_y = 0x3ff;
+ pm->maxcontacts = PM_6250_MTSLOT;
+ break;
+ }
+
+ input_set_abs_params(pm->dev, ABS_X, 0, max_x, 0, 0);
+ input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0);
+
+ if (pm->maxcontacts > 1) {
+ input_mt_init_slots(pm->dev, pm->maxcontacts);
+ input_set_abs_params(pm->dev,
+ ABS_MT_POSITION_X, 0, max_x, 0, 0);
+ input_set_abs_params(pm->dev,
+ ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+ }
serio_set_drvdata(serio, pm);
@@ -155,7 +308,7 @@
static struct serio_driver pm_drv = {
.driver = {
- .name = "penmountlpc",
+ .name = "serio-penmount",
},
.description = DRIVER_DESC,
.id_table = pm_serio_ids,
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 8feb7f3..64ce697 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -328,7 +328,7 @@
ts.shift = info->oversampling_shift;
ts.features = platform_get_device_id(pdev)->driver_data;
- ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED,
+ ret = request_irq(ts.irq_tc, stylus_irq, 0,
"s3c2410_ts_pen", ts.input);
if (ret) {
dev_err(dev, "cannot get TC interrupt\n");
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index fadc115..1f674cb 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -66,7 +66,6 @@
struct tsc2007 {
struct input_dev *input;
char phys[32];
- struct delayed_work work;
struct i2c_client *client;
@@ -76,9 +75,11 @@
unsigned long poll_delay;
unsigned long poll_period;
- bool pendown;
int irq;
+ wait_queue_head_t wait;
+ bool stopped;
+
int (*get_pendown_state)(void);
void (*clear_penirq)(void);
};
@@ -141,25 +142,8 @@
return rt;
}
-static void tsc2007_send_up_event(struct tsc2007 *tsc)
+static bool tsc2007_is_pen_down(struct tsc2007 *ts)
{
- struct input_dev *input = tsc->input;
-
- dev_dbg(&tsc->client->dev, "UP\n");
-
- input_report_key(input, BTN_TOUCH, 0);
- input_report_abs(input, ABS_PRESSURE, 0);
- input_sync(input);
-}
-
-static void tsc2007_work(struct work_struct *work)
-{
- struct tsc2007 *ts =
- container_of(to_delayed_work(work), struct tsc2007, work);
- bool debounced = false;
- struct ts_event tc;
- u32 rt;
-
/*
* NOTE: We can't rely on the pressure to determine the pen down
* state, even though this controller has a pressure sensor.
@@ -170,97 +154,123 @@
* The only safe way to check for the pen up condition is in the
* work function by reading the pen signal state (it's a GPIO
* and IRQ). Unfortunately such callback is not always available,
- * in that case we have rely on the pressure anyway.
+ * in that case we assume that the pen is down and expect caller
+ * to fall back on the pressure reading.
*/
- if (ts->get_pendown_state) {
- if (unlikely(!ts->get_pendown_state())) {
- tsc2007_send_up_event(ts);
- ts->pendown = false;
- goto out;
- }
- dev_dbg(&ts->client->dev, "pen is still down\n");
- }
+ if (!ts->get_pendown_state)
+ return true;
- tsc2007_read_values(ts, &tc);
-
- rt = tsc2007_calculate_pressure(ts, &tc);
- if (rt > ts->max_rt) {
- /*
- * Sample found inconsistent by debouncing or pressure is
- * beyond the maximum. Don't report it to user space,
- * repeat at least once more the measurement.
- */
- dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
- debounced = true;
- goto out;
-
- }
-
- if (rt) {
- struct input_dev *input = ts->input;
-
- if (!ts->pendown) {
- dev_dbg(&ts->client->dev, "DOWN\n");
-
- input_report_key(input, BTN_TOUCH, 1);
- ts->pendown = true;
- }
-
- input_report_abs(input, ABS_X, tc.x);
- input_report_abs(input, ABS_Y, tc.y);
- input_report_abs(input, ABS_PRESSURE, rt);
-
- input_sync(input);
-
- dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n",
- tc.x, tc.y, rt);
-
- } else if (!ts->get_pendown_state && ts->pendown) {
- /*
- * We don't have callback to check pendown state, so we
- * have to assume that since pressure reported is 0 the
- * pen was lifted up.
- */
- tsc2007_send_up_event(ts);
- ts->pendown = false;
- }
-
- out:
- if (ts->pendown || debounced)
- schedule_delayed_work(&ts->work,
- msecs_to_jiffies(ts->poll_period));
- else
- enable_irq(ts->irq);
+ return ts->get_pendown_state();
}
-static irqreturn_t tsc2007_irq(int irq, void *handle)
+static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
{
struct tsc2007 *ts = handle;
+ struct input_dev *input = ts->input;
+ struct ts_event tc;
+ u32 rt;
- if (!ts->get_pendown_state || likely(ts->get_pendown_state())) {
- disable_irq_nosync(ts->irq);
- schedule_delayed_work(&ts->work,
- msecs_to_jiffies(ts->poll_delay));
+ while (!ts->stopped && tsc2007_is_pen_down(ts)) {
+
+ /* pen is down, continue with the measurement */
+ tsc2007_read_values(ts, &tc);
+
+ rt = tsc2007_calculate_pressure(ts, &tc);
+
+ if (rt == 0 && !ts->get_pendown_state) {
+ /*
+ * If pressure reported is 0 and we don't have
+ * callback to check pendown state, we have to
+ * assume that pen was lifted up.
+ */
+ break;
+ }
+
+ if (rt <= ts->max_rt) {
+ dev_dbg(&ts->client->dev,
+ "DOWN point(%4d,%4d), pressure (%4u)\n",
+ tc.x, tc.y, rt);
+
+ input_report_key(input, BTN_TOUCH, 1);
+ input_report_abs(input, ABS_X, tc.x);
+ input_report_abs(input, ABS_Y, tc.y);
+ input_report_abs(input, ABS_PRESSURE, rt);
+
+ input_sync(input);
+
+ } else {
+ /*
+ * Sample found inconsistent by debouncing or pressure is
+ * beyond the maximum. Don't report it to user space,
+ * repeat at least once more the measurement.
+ */
+ dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
+ }
+
+ wait_event_timeout(ts->wait, ts->stopped,
+ msecs_to_jiffies(ts->poll_period));
}
+ dev_dbg(&ts->client->dev, "UP\n");
+
+ input_report_key(input, BTN_TOUCH, 0);
+ input_report_abs(input, ABS_PRESSURE, 0);
+ input_sync(input);
+
if (ts->clear_penirq)
ts->clear_penirq();
return IRQ_HANDLED;
}
-static void tsc2007_free_irq(struct tsc2007 *ts)
+static irqreturn_t tsc2007_hard_irq(int irq, void *handle)
{
- free_irq(ts->irq, ts);
- if (cancel_delayed_work_sync(&ts->work)) {
- /*
- * Work was pending, therefore we need to enable
- * IRQ here to balance the disable_irq() done in the
- * interrupt handler.
- */
- enable_irq(ts->irq);
+ struct tsc2007 *ts = handle;
+
+ if (!ts->get_pendown_state || likely(ts->get_pendown_state()))
+ return IRQ_WAKE_THREAD;
+
+ if (ts->clear_penirq)
+ ts->clear_penirq();
+
+ return IRQ_HANDLED;
+}
+
+static void tsc2007_stop(struct tsc2007 *ts)
+{
+ ts->stopped = true;
+ mb();
+ wake_up(&ts->wait);
+
+ disable_irq(ts->irq);
+}
+
+static int tsc2007_open(struct input_dev *input_dev)
+{
+ struct tsc2007 *ts = input_get_drvdata(input_dev);
+ int err;
+
+ ts->stopped = false;
+ mb();
+
+ enable_irq(ts->irq);
+
+ /* Prepare for touch readings - power down ADC and enable PENIRQ */
+ err = tsc2007_xfer(ts, PWRDOWN);
+ if (err < 0) {
+ tsc2007_stop(ts);
+ return err;
}
+
+ return 0;
+}
+
+static void tsc2007_close(struct input_dev *input_dev)
+{
+ struct tsc2007 *ts = input_get_drvdata(input_dev);
+
+ tsc2007_stop(ts);
}
static int __devinit tsc2007_probe(struct i2c_client *client,
@@ -290,7 +300,7 @@
ts->client = client;
ts->irq = client->irq;
ts->input = input_dev;
- INIT_DELAYED_WORK(&ts->work, tsc2007_work);
+ init_waitqueue_head(&ts->wait);
ts->model = pdata->model;
ts->x_plate_ohms = pdata->x_plate_ohms;
@@ -300,6 +310,12 @@
ts->get_pendown_state = pdata->get_pendown_state;
ts->clear_penirq = pdata->clear_penirq;
+ if (pdata->x_plate_ohms == 0) {
+ dev_err(&client->dev, "x_plate_ohms is not set up in platform data");
+ err = -EINVAL;
+ goto err_free_mem;
+ }
+
snprintf(ts->phys, sizeof(ts->phys),
"%s/input0", dev_name(&client->dev));
@@ -307,6 +323,11 @@
input_dev->phys = ts->phys;
input_dev->id.bustype = BUS_I2C;
+ input_dev->open = tsc2007_open;
+ input_dev->close = tsc2007_close;
+
+ input_set_drvdata(input_dev, ts);
+
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
@@ -318,17 +339,14 @@
if (pdata->init_platform_hw)
pdata->init_platform_hw();
- err = request_irq(ts->irq, tsc2007_irq, 0,
- client->dev.driver->name, ts);
+ err = request_threaded_irq(ts->irq, tsc2007_hard_irq, tsc2007_soft_irq,
+ IRQF_ONESHOT, client->dev.driver->name, ts);
if (err < 0) {
dev_err(&client->dev, "irq %d busy?\n", ts->irq);
goto err_free_mem;
}
- /* Prepare for touch readings - power down ADC and enable PENIRQ */
- err = tsc2007_xfer(ts, PWRDOWN);
- if (err < 0)
- goto err_free_irq;
+ tsc2007_stop(ts);
err = input_register_device(input_dev);
if (err)
@@ -339,7 +357,7 @@
return 0;
err_free_irq:
- tsc2007_free_irq(ts);
+ free_irq(ts->irq, ts);
if (pdata->exit_platform_hw)
pdata->exit_platform_hw();
err_free_mem:
@@ -353,7 +371,7 @@
struct tsc2007 *ts = i2c_get_clientdata(client);
struct tsc2007_platform_data *pdata = client->dev.platform_data;
- tsc2007_free_irq(ts);
+ free_irq(ts->irq, ts);
if (pdata->exit_platform_hw)
pdata->exit_platform_hw();
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
new file mode 100644
index 0000000..29d5ed4
--- /dev/null
+++ b/drivers/input/touchscreen/tsc40.c
@@ -0,0 +1,184 @@
+/*
+ * TSC-40 serial touchscreen driver. It should be compatible with
+ * TSC-10 and 25.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ * License: GPLv2 as published by the FSF.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define PACKET_LENGTH 5
+struct tsc_ser {
+ struct input_dev *dev;
+ struct serio *serio;
+ u32 idx;
+ unsigned char data[PACKET_LENGTH];
+ char phys[32];
+};
+
+static void tsc_process_data(struct tsc_ser *ptsc)
+{
+ struct input_dev *dev = ptsc->dev;
+ u8 *data = ptsc->data;
+ u32 x;
+ u32 y;
+
+ x = ((data[1] & 0x03) << 8) | data[2];
+ y = ((data[3] & 0x03) << 8) | data[4];
+
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ input_report_key(dev, BTN_TOUCH, 1);
+
+ input_sync(dev);
+}
+
+static irqreturn_t tsc_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags)
+{
+ struct tsc_ser *ptsc = serio_get_drvdata(serio);
+ struct input_dev *dev = ptsc->dev;
+
+ ptsc->data[ptsc->idx] = data;
+ switch (ptsc->idx++) {
+ case 0:
+ if (unlikely((data & 0x3e) != 0x10)) {
+ dev_dbg(&serio->dev,
+ "unsynchronized packet start (0x%02x)\n", data);
+ ptsc->idx = 0;
+ } else if (!(data & 0x01)) {
+ input_report_key(dev, BTN_TOUCH, 0);
+ input_sync(dev);
+ ptsc->idx = 0;
+ }
+ break;
+
+ case 1:
+ case 3:
+ if (unlikely(data & 0xfc)) {
+ dev_dbg(&serio->dev,
+ "unsynchronized data 0x%02x at offset %d\n",
+ data, ptsc->idx - 1);
+ ptsc->idx = 0;
+ }
+ break;
+
+ case 4:
+ tsc_process_data(ptsc);
+ ptsc->idx = 0;
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int tsc_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct tsc_ser *ptsc;
+ struct input_dev *input_dev;
+ int error;
+
+ ptsc = kzalloc(sizeof(struct tsc_ser), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ptsc || !input_dev) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ ptsc->serio = serio;
+ ptsc->dev = input_dev;
+ snprintf(ptsc->phys, sizeof(ptsc->phys), "%s/input0", serio->phys);
+
+ input_dev->name = "TSC-10/25/40 Serial TouchScreen";
+ input_dev->phys = ptsc->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_TSC40;
+ input_dev->id.product = 40;
+ input_dev->id.version = 0x0001;
+ input_dev->dev.parent = &serio->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0);
+ input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0);
+ input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0);
+
+ serio_set_drvdata(serio, ptsc);
+
+ error = serio_open(serio, drv);
+ if (error)
+ goto fail2;
+
+ error = input_register_device(ptsc->dev);
+ if (error)
+ goto fail3;
+
+ return 0;
+
+fail3:
+ serio_close(serio);
+fail2:
+ serio_set_drvdata(serio, NULL);
+fail1:
+ input_free_device(input_dev);
+ kfree(ptsc);
+ return error;
+}
+
+static void tsc_disconnect(struct serio *serio)
+{
+ struct tsc_ser *ptsc = serio_get_drvdata(serio);
+
+ serio_close(serio);
+
+ input_unregister_device(ptsc->dev);
+ kfree(ptsc);
+
+ serio_set_drvdata(serio, NULL);
+}
+
+static struct serio_device_id tsc_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_TSC40,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(serio, tsc_serio_ids);
+
+#define DRIVER_DESC "TSC-10/25/40 serial touchscreen driver"
+
+static struct serio_driver tsc_drv = {
+ .driver = {
+ .name = "tsc40",
+ },
+ .description = DRIVER_DESC,
+ .id_table = tsc_serio_ids,
+ .interrupt = tsc_interrupt,
+ .connect = tsc_connect,
+ .disconnect = tsc_disconnect,
+};
+
+static int __init tsc_ser_init(void)
+{
+ return serio_register_driver(&tsc_drv);
+}
+module_init(tsc_ser_init);
+
+static void __exit tsc_exit(void)
+{
+ serio_unregister_driver(&tsc_drv);
+}
+module_exit(tsc_exit);
+
+MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index 7a45d68..217aa51 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -279,7 +279,7 @@
w90p910_ts->irq_num = platform_get_irq(pdev, 0);
if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt,
- IRQF_DISABLED, "w90p910ts", w90p910_ts)) {
+ 0, "w90p910ts", w90p910_ts)) {
err = -EBUSY;
goto fail4;
}
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 9941d39..1569a39 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -367,6 +367,20 @@
return rc;
}
+static int w8001_open(struct input_dev *dev)
+{
+ struct w8001 *w8001 = input_get_drvdata(dev);
+
+ return w8001_command(w8001, W8001_CMD_START, false);
+}
+
+static void w8001_close(struct input_dev *dev)
+{
+ struct w8001 *w8001 = input_get_drvdata(dev);
+
+ w8001_command(w8001, W8001_CMD_STOP, false);
+}
+
static int w8001_setup(struct w8001 *w8001)
{
struct input_dev *dev = w8001->dev;
@@ -476,7 +490,7 @@
strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
- return w8001_command(w8001, W8001_CMD_START, false);
+ return 0;
}
/*
@@ -487,12 +501,12 @@
{
struct w8001 *w8001 = serio_get_drvdata(serio);
- input_get_device(w8001->dev);
- input_unregister_device(w8001->dev);
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- input_put_device(w8001->dev);
+
+ input_unregister_device(w8001->dev);
kfree(w8001);
+
+ serio_set_drvdata(serio, NULL);
}
/*
@@ -536,6 +550,11 @@
input_dev->id.version = 0x0100;
input_dev->dev.parent = &serio->dev;
+ input_dev->open = w8001_open;
+ input_dev->close = w8001_close;
+
+ input_set_drvdata(input_dev, w8001);
+
err = input_register_device(w8001->dev);
if (err)
goto fail3;
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 7d7eaa1..5414253b 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -112,4 +112,23 @@
To use x2apic mode in the CPU's which support x2APIC enhancements or
to support platforms with CPU's having > 8 bit APIC ID, say Y.
+# OMAP IOMMU support
+config OMAP_IOMMU
+ bool "OMAP IOMMU Support"
+ depends on ARCH_OMAP
+ select IOMMU_API
+
+config OMAP_IOVMM
+ tristate "OMAP IO Virtual Memory Manager Support"
+ depends on OMAP_IOMMU
+
+config OMAP_IOMMU_DEBUG
+ tristate "Export OMAP IOMMU/IOVMM internals in DebugFS"
+ depends on OMAP_IOVMM && DEBUG_FS
+ help
+ Select this to see extensive information about
+ the internal state of OMAP IOMMU/IOVMM in debugfs.
+
+ Say N unless you know you need this.
+
endif # IOMMU_SUPPORT
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 6394994a..2f44487 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -4,3 +4,6 @@
obj-$(CONFIG_DMAR_TABLE) += dmar.o
obj-$(CONFIG_INTEL_IOMMU) += iova.o intel-iommu.o
obj-$(CONFIG_IRQ_REMAP) += intr_remapping.o
+obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
+obj-$(CONFIG_OMAP_IOVMM) += omap-iovmm.o
+obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 0e4227f..4ee277a 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1283,7 +1283,7 @@
if (!pte || !IOMMU_PTE_PRESENT(*pte))
continue;
- dma_ops_reserve_addresses(dma_dom, i << PAGE_SHIFT, 1);
+ dma_ops_reserve_addresses(dma_dom, i >> PAGE_SHIFT, 1);
}
update_domain(&dma_dom->domain);
@@ -2495,7 +2495,7 @@
void __init amd_iommu_init_api(void)
{
- register_iommu(&amd_iommu_ops);
+ bus_set_iommu(&pci_bus_type, &amd_iommu_ops);
}
int __init amd_iommu_init_dma_ops(void)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index be1953c..bb161d2f 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -3642,7 +3642,7 @@
init_iommu_pm_ops();
- register_iommu(&intel_iommu_ops);
+ bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
bus_register_notifier(&pci_bus_type, &device_nb);
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 6e6b6a1..2fb2963 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -16,6 +16,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/device.h>
+#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/types.h>
#include <linux/module.h>
@@ -23,32 +25,78 @@
#include <linux/errno.h>
#include <linux/iommu.h>
-static struct iommu_ops *iommu_ops;
-
-void register_iommu(struct iommu_ops *ops)
+static void iommu_bus_init(struct bus_type *bus, struct iommu_ops *ops)
{
- if (iommu_ops)
- BUG();
-
- iommu_ops = ops;
}
-bool iommu_found(void)
+/**
+ * bus_set_iommu - set iommu-callbacks for the bus
+ * @bus: bus.
+ * @ops: the callbacks provided by the iommu-driver
+ *
+ * This function is called by an iommu driver to set the iommu methods
+ * used for a particular bus. Drivers for devices on that bus can use
+ * the iommu-api after these ops are registered.
+ * This special function is needed because IOMMUs are usually devices on
+ * the bus itself, so the iommu drivers are not initialized when the bus
+ * is set up. With this function the iommu-driver can set the iommu-ops
+ * afterwards.
+ */
+int bus_set_iommu(struct bus_type *bus, struct iommu_ops *ops)
{
- return iommu_ops != NULL;
-}
-EXPORT_SYMBOL_GPL(iommu_found);
+ if (bus->iommu_ops != NULL)
+ return -EBUSY;
-struct iommu_domain *iommu_domain_alloc(void)
+ bus->iommu_ops = ops;
+
+ /* Do IOMMU specific setup for this bus-type */
+ iommu_bus_init(bus, ops);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bus_set_iommu);
+
+bool iommu_present(struct bus_type *bus)
+{
+ return bus->iommu_ops != NULL;
+}
+EXPORT_SYMBOL_GPL(iommu_present);
+
+/**
+ * iommu_set_fault_handler() - set a fault handler for an iommu domain
+ * @domain: iommu domain
+ * @handler: fault handler
+ *
+ * This function should be used by IOMMU users which want to be notified
+ * whenever an IOMMU fault happens.
+ *
+ * The fault handler itself should return 0 on success, and an appropriate
+ * error code otherwise.
+ */
+void iommu_set_fault_handler(struct iommu_domain *domain,
+ iommu_fault_handler_t handler)
+{
+ BUG_ON(!domain);
+
+ domain->handler = handler;
+}
+EXPORT_SYMBOL_GPL(iommu_set_fault_handler);
+
+struct iommu_domain *iommu_domain_alloc(struct bus_type *bus)
{
struct iommu_domain *domain;
int ret;
+ if (bus == NULL || bus->iommu_ops == NULL)
+ return NULL;
+
domain = kmalloc(sizeof(*domain), GFP_KERNEL);
if (!domain)
return NULL;
- ret = iommu_ops->domain_init(domain);
+ domain->ops = bus->iommu_ops;
+
+ ret = domain->ops->domain_init(domain);
if (ret)
goto out_free;
@@ -63,62 +111,78 @@
void iommu_domain_free(struct iommu_domain *domain)
{
- iommu_ops->domain_destroy(domain);
+ if (likely(domain->ops->domain_destroy != NULL))
+ domain->ops->domain_destroy(domain);
+
kfree(domain);
}
EXPORT_SYMBOL_GPL(iommu_domain_free);
int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
{
- return iommu_ops->attach_dev(domain, dev);
+ if (unlikely(domain->ops->attach_dev == NULL))
+ return -ENODEV;
+
+ return domain->ops->attach_dev(domain, dev);
}
EXPORT_SYMBOL_GPL(iommu_attach_device);
void iommu_detach_device(struct iommu_domain *domain, struct device *dev)
{
- iommu_ops->detach_dev(domain, dev);
+ if (unlikely(domain->ops->detach_dev == NULL))
+ return;
+
+ domain->ops->detach_dev(domain, dev);
}
EXPORT_SYMBOL_GPL(iommu_detach_device);
phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain,
unsigned long iova)
{
- return iommu_ops->iova_to_phys(domain, iova);
+ if (unlikely(domain->ops->iova_to_phys == NULL))
+ return 0;
+
+ return domain->ops->iova_to_phys(domain, iova);
}
EXPORT_SYMBOL_GPL(iommu_iova_to_phys);
int iommu_domain_has_cap(struct iommu_domain *domain,
unsigned long cap)
{
- return iommu_ops->domain_has_cap(domain, cap);
+ if (unlikely(domain->ops->domain_has_cap == NULL))
+ return 0;
+
+ return domain->ops->domain_has_cap(domain, cap);
}
EXPORT_SYMBOL_GPL(iommu_domain_has_cap);
int iommu_map(struct iommu_domain *domain, unsigned long iova,
phys_addr_t paddr, int gfp_order, int prot)
{
- unsigned long invalid_mask;
size_t size;
- size = 0x1000UL << gfp_order;
- invalid_mask = size - 1;
+ if (unlikely(domain->ops->map == NULL))
+ return -ENODEV;
- BUG_ON((iova | paddr) & invalid_mask);
+ size = PAGE_SIZE << gfp_order;
- return iommu_ops->map(domain, iova, paddr, gfp_order, prot);
+ BUG_ON(!IS_ALIGNED(iova | paddr, size));
+
+ return domain->ops->map(domain, iova, paddr, gfp_order, prot);
}
EXPORT_SYMBOL_GPL(iommu_map);
int iommu_unmap(struct iommu_domain *domain, unsigned long iova, int gfp_order)
{
- unsigned long invalid_mask;
size_t size;
- size = 0x1000UL << gfp_order;
- invalid_mask = size - 1;
+ if (unlikely(domain->ops->unmap == NULL))
+ return -ENODEV;
- BUG_ON(iova & invalid_mask);
+ size = PAGE_SIZE << gfp_order;
- return iommu_ops->unmap(domain, iova, gfp_order);
+ BUG_ON(!IS_ALIGNED(iova, size));
+
+ return domain->ops->unmap(domain, iova, gfp_order);
}
EXPORT_SYMBOL_GPL(iommu_unmap);
diff --git a/drivers/iommu/msm_iommu.c b/drivers/iommu/msm_iommu.c
index 1a584e0..5865dd2 100644
--- a/drivers/iommu/msm_iommu.c
+++ b/drivers/iommu/msm_iommu.c
@@ -543,6 +543,13 @@
}
ret = __flush_iotlb(domain);
+
+ /*
+ * the IOMMU API requires us to return the order of the unmapped
+ * page (on success).
+ */
+ if (!ret)
+ ret = order;
fail:
spin_unlock_irqrestore(&msm_iommu_lock, flags);
return ret;
@@ -721,7 +728,7 @@
static int __init msm_iommu_init(void)
{
setup_iommu_tex_classes();
- register_iommu(&msm_iommu_ops);
+ bus_set_iommu(&platform_bus_type, &msm_iommu_ops);
return 0;
}
diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c
new file mode 100644
index 0000000..9c192e7
--- /dev/null
+++ b/drivers/iommu/omap-iommu-debug.c
@@ -0,0 +1,418 @@
+/*
+ * omap iommu: debugfs interface
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
+
+#include <plat/iopgtable.h>
+
+#define MAXCOLUMN 100 /* for short messages */
+
+static DEFINE_MUTEX(iommu_debug_lock);
+
+static struct dentry *iommu_debug_root;
+
+static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ u32 ver = omap_iommu_arch_version();
+ char buf[MAXCOLUMN], *p = buf;
+
+ p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+}
+
+static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct omap_iommu *obj = file->private_data;
+ char *p, *buf;
+ ssize_t bytes;
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ p = buf;
+
+ mutex_lock(&iommu_debug_lock);
+
+ bytes = omap_iommu_dump_ctx(obj, p, count);
+ bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
+
+ mutex_unlock(&iommu_debug_lock);
+ kfree(buf);
+
+ return bytes;
+}
+
+static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct omap_iommu *obj = file->private_data;
+ char *p, *buf;
+ ssize_t bytes, rest;
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ p = buf;
+
+ mutex_lock(&iommu_debug_lock);
+
+ p += sprintf(p, "%8s %8s\n", "cam:", "ram:");
+ p += sprintf(p, "-----------------------------------------\n");
+ rest = count - (p - buf);
+ p += omap_dump_tlb_entries(obj, p, rest);
+
+ bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+ mutex_unlock(&iommu_debug_lock);
+ kfree(buf);
+
+ return bytes;
+}
+
+static ssize_t debug_write_pagetable(struct file *file,
+ const char __user *userbuf, size_t count, loff_t *ppos)
+{
+ struct iotlb_entry e;
+ struct cr_regs cr;
+ int err;
+ struct omap_iommu *obj = file->private_data;
+ char buf[MAXCOLUMN], *p = buf;
+
+ count = min(count, sizeof(buf));
+
+ mutex_lock(&iommu_debug_lock);
+ if (copy_from_user(p, userbuf, count)) {
+ mutex_unlock(&iommu_debug_lock);
+ return -EFAULT;
+ }
+
+ sscanf(p, "%x %x", &cr.cam, &cr.ram);
+ if (!cr.cam || !cr.ram) {
+ mutex_unlock(&iommu_debug_lock);
+ return -EINVAL;
+ }
+
+ omap_iotlb_cr_to_e(&cr, &e);
+ err = omap_iopgtable_store_entry(obj, &e);
+ if (err)
+ dev_err(obj->dev, "%s: fail to store cr\n", __func__);
+
+ mutex_unlock(&iommu_debug_lock);
+ return count;
+}
+
+#define dump_ioptable_entry_one(lv, da, val) \
+ ({ \
+ int __err = 0; \
+ ssize_t bytes; \
+ const int maxcol = 22; \
+ const char *str = "%d: %08x %08x\n"; \
+ bytes = snprintf(p, maxcol, str, lv, da, val); \
+ p += bytes; \
+ len -= bytes; \
+ if (len < maxcol) \
+ __err = -ENOMEM; \
+ __err; \
+ })
+
+static ssize_t dump_ioptable(struct omap_iommu *obj, char *buf, ssize_t len)
+{
+ int i;
+ u32 *iopgd;
+ char *p = buf;
+
+ spin_lock(&obj->page_table_lock);
+
+ iopgd = iopgd_offset(obj, 0);
+ for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) {
+ int j, err;
+ u32 *iopte;
+ u32 da;
+
+ if (!*iopgd)
+ continue;
+
+ if (!(*iopgd & IOPGD_TABLE)) {
+ da = i << IOPGD_SHIFT;
+
+ err = dump_ioptable_entry_one(1, da, *iopgd);
+ if (err)
+ goto out;
+ continue;
+ }
+
+ iopte = iopte_offset(iopgd, 0);
+
+ for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) {
+ if (!*iopte)
+ continue;
+
+ da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT);
+ err = dump_ioptable_entry_one(2, da, *iopgd);
+ if (err)
+ goto out;
+ }
+ }
+out:
+ spin_unlock(&obj->page_table_lock);
+
+ return p - buf;
+}
+
+static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct omap_iommu *obj = file->private_data;
+ char *p, *buf;
+ size_t bytes;
+
+ buf = (char *)__get_free_page(GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ p = buf;
+
+ p += sprintf(p, "L: %8s %8s\n", "da:", "pa:");
+ p += sprintf(p, "-----------------------------------------\n");
+
+ mutex_lock(&iommu_debug_lock);
+
+ bytes = PAGE_SIZE - (p - buf);
+ p += dump_ioptable(obj, p, bytes);
+
+ bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+ mutex_unlock(&iommu_debug_lock);
+ free_page((unsigned long)buf);
+
+ return bytes;
+}
+
+static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct omap_iommu *obj = file->private_data;
+ char *p, *buf;
+ struct iovm_struct *tmp;
+ int uninitialized_var(i);
+ ssize_t bytes;
+
+ buf = (char *)__get_free_page(GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ p = buf;
+
+ p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n",
+ "No", "start", "end", "size", "flags");
+ p += sprintf(p, "-------------------------------------------------\n");
+
+ mutex_lock(&iommu_debug_lock);
+
+ list_for_each_entry(tmp, &obj->mmap, list) {
+ size_t len;
+ const char *str = "%3d %08x-%08x %6x %8x\n";
+ const int maxcol = 39;
+
+ len = tmp->da_end - tmp->da_start;
+ p += snprintf(p, maxcol, str,
+ i, tmp->da_start, tmp->da_end, len, tmp->flags);
+
+ if (PAGE_SIZE - (p - buf) < maxcol)
+ break;
+ i++;
+ }
+
+ bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+ mutex_unlock(&iommu_debug_lock);
+ free_page((unsigned long)buf);
+
+ return bytes;
+}
+
+static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct omap_iommu *obj = file->private_data;
+ char *p, *buf;
+ struct iovm_struct *area;
+ ssize_t bytes;
+
+ count = min_t(ssize_t, count, PAGE_SIZE);
+
+ buf = (char *)__get_free_page(GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ p = buf;
+
+ mutex_lock(&iommu_debug_lock);
+
+ area = omap_find_iovm_area(obj, (u32)ppos);
+ if (IS_ERR(area)) {
+ bytes = -EINVAL;
+ goto err_out;
+ }
+ memcpy(p, area->va, count);
+ p += count;
+
+ bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+err_out:
+ mutex_unlock(&iommu_debug_lock);
+ free_page((unsigned long)buf);
+
+ return bytes;
+}
+
+static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct omap_iommu *obj = file->private_data;
+ struct iovm_struct *area;
+ char *p, *buf;
+
+ count = min_t(size_t, count, PAGE_SIZE);
+
+ buf = (char *)__get_free_page(GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ p = buf;
+
+ mutex_lock(&iommu_debug_lock);
+
+ if (copy_from_user(p, userbuf, count)) {
+ count = -EFAULT;
+ goto err_out;
+ }
+
+ area = omap_find_iovm_area(obj, (u32)ppos);
+ if (IS_ERR(area)) {
+ count = -EINVAL;
+ goto err_out;
+ }
+ memcpy(area->va, p, count);
+err_out:
+ mutex_unlock(&iommu_debug_lock);
+ free_page((unsigned long)buf);
+
+ return count;
+}
+
+static int debug_open_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+#define DEBUG_FOPS(name) \
+ static const struct file_operations debug_##name##_fops = { \
+ .open = debug_open_generic, \
+ .read = debug_read_##name, \
+ .write = debug_write_##name, \
+ .llseek = generic_file_llseek, \
+ };
+
+#define DEBUG_FOPS_RO(name) \
+ static const struct file_operations debug_##name##_fops = { \
+ .open = debug_open_generic, \
+ .read = debug_read_##name, \
+ .llseek = generic_file_llseek, \
+ };
+
+DEBUG_FOPS_RO(ver);
+DEBUG_FOPS_RO(regs);
+DEBUG_FOPS_RO(tlb);
+DEBUG_FOPS(pagetable);
+DEBUG_FOPS_RO(mmap);
+DEBUG_FOPS(mem);
+
+#define __DEBUG_ADD_FILE(attr, mode) \
+ { \
+ struct dentry *dent; \
+ dent = debugfs_create_file(#attr, mode, parent, \
+ obj, &debug_##attr##_fops); \
+ if (!dent) \
+ return -ENOMEM; \
+ }
+
+#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600)
+#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400)
+
+static int iommu_debug_register(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_iommu *obj = platform_get_drvdata(pdev);
+ struct dentry *d, *parent;
+
+ if (!obj || !obj->dev)
+ return -EINVAL;
+
+ d = debugfs_create_dir(obj->name, iommu_debug_root);
+ if (!d)
+ return -ENOMEM;
+ parent = d;
+
+ d = debugfs_create_u8("nr_tlb_entries", 400, parent,
+ (u8 *)&obj->nr_tlb_entries);
+ if (!d)
+ return -ENOMEM;
+
+ DEBUG_ADD_FILE_RO(ver);
+ DEBUG_ADD_FILE_RO(regs);
+ DEBUG_ADD_FILE_RO(tlb);
+ DEBUG_ADD_FILE(pagetable);
+ DEBUG_ADD_FILE_RO(mmap);
+ DEBUG_ADD_FILE(mem);
+
+ return 0;
+}
+
+static int __init iommu_debug_init(void)
+{
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("iommu", NULL);
+ if (!d)
+ return -ENOMEM;
+ iommu_debug_root = d;
+
+ err = omap_foreach_iommu_device(d, iommu_debug_register);
+ if (err)
+ goto err_out;
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(iommu_debug_root);
+ return err;
+}
+module_init(iommu_debug_init)
+
+static void __exit iommu_debugfs_exit(void)
+{
+ debugfs_remove_recursive(iommu_debug_root);
+}
+module_exit(iommu_debugfs_exit)
+
+MODULE_DESCRIPTION("omap iommu: debugfs interface");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
new file mode 100644
index 0000000..8f32b2b
--- /dev/null
+++ b/drivers/iommu/omap-iommu.c
@@ -0,0 +1,1245 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ * Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/iommu.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+
+#include <asm/cacheflush.h>
+
+#include <plat/iommu.h>
+
+#include <plat/iopgtable.h>
+
+#define for_each_iotlb_cr(obj, n, __i, cr) \
+ for (__i = 0; \
+ (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true); \
+ __i++)
+
+/**
+ * struct omap_iommu_domain - omap iommu domain
+ * @pgtable: the page table
+ * @iommu_dev: an omap iommu device attached to this domain. only a single
+ * iommu device can be attached for now.
+ * @lock: domain lock, should be taken when attaching/detaching
+ */
+struct omap_iommu_domain {
+ u32 *pgtable;
+ struct omap_iommu *iommu_dev;
+ spinlock_t lock;
+};
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * omap_install_iommu_arch - Install archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int omap_install_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu)
+ return -EBUSY;
+
+ arch_iommu = ops;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_install_iommu_arch);
+
+/**
+ * omap_uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void omap_uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu != ops)
+ pr_err("%s: not your arch\n", __func__);
+
+ arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(omap_uninstall_iommu_arch);
+
+/**
+ * omap_iommu_save_ctx - Save registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void omap_iommu_save_ctx(struct omap_iommu *obj)
+{
+ arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(omap_iommu_save_ctx);
+
+/**
+ * omap_iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void omap_iommu_restore_ctx(struct omap_iommu *obj)
+{
+ arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(omap_iommu_restore_ctx);
+
+/**
+ * omap_iommu_arch_version - Return running iommu arch version
+ **/
+u32 omap_iommu_arch_version(void)
+{
+ return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(omap_iommu_arch_version);
+
+static int iommu_enable(struct omap_iommu *obj)
+{
+ int err;
+
+ if (!obj)
+ return -EINVAL;
+
+ if (!arch_iommu)
+ return -ENODEV;
+
+ clk_enable(obj->clk);
+
+ err = arch_iommu->enable(obj);
+
+ clk_disable(obj->clk);
+ return err;
+}
+
+static void iommu_disable(struct omap_iommu *obj)
+{
+ if (!obj)
+ return;
+
+ clk_enable(obj->clk);
+
+ arch_iommu->disable(obj);
+
+ clk_disable(obj->clk);
+}
+
+/*
+ * TLB operations
+ */
+void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+ BUG_ON(!cr || !e);
+
+ arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(omap_iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+ if (!cr)
+ return -EINVAL;
+
+ return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct omap_iommu *obj,
+ struct iotlb_entry *e)
+{
+ if (!e)
+ return NULL;
+
+ return arch_iommu->alloc_cr(obj, e);
+}
+
+static u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+ return arch_iommu->cr_to_virt(cr);
+}
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+ return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct omap_iommu *obj, u32 *da)
+{
+ return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct omap_iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ val = iommu_read_reg(obj, MMU_LOCK);
+
+ l->base = MMU_LOCK_BASE(val);
+ l->vict = MMU_LOCK_VICT(val);
+
+}
+
+static void iotlb_lock_set(struct omap_iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ val = (l->base << MMU_LOCK_BASE_SHIFT);
+ val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+ iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_load_cr(obj, cr);
+
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj: target iommu
+ * @cr: contents of cam and ram register
+ * @buf: output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct omap_iommu *obj, struct cr_regs *cr,
+ char *buf)
+{
+ BUG_ON(!cr || !buf);
+
+ return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/* only used in iotlb iteration for-loop */
+static struct cr_regs __iotlb_read_cr(struct omap_iommu *obj, int n)
+{
+ struct cr_regs cr;
+ struct iotlb_lock l;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = n;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &cr);
+
+ return cr;
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+#ifdef PREFETCH_IOTLB
+static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
+{
+ int err = 0;
+ struct iotlb_lock l;
+ struct cr_regs *cr;
+
+ if (!obj || !obj->nr_tlb_entries || !e)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ iotlb_lock_get(obj, &l);
+ if (l.base == obj->nr_tlb_entries) {
+ dev_warn(obj->dev, "%s: preserve entries full\n", __func__);
+ err = -EBUSY;
+ goto out;
+ }
+ if (!e->prsvd) {
+ int i;
+ struct cr_regs tmp;
+
+ for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp)
+ if (!iotlb_cr_valid(&tmp))
+ break;
+
+ if (i == obj->nr_tlb_entries) {
+ dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+ err = -EBUSY;
+ goto out;
+ }
+
+ iotlb_lock_get(obj, &l);
+ } else {
+ l.vict = l.base;
+ iotlb_lock_set(obj, &l);
+ }
+
+ cr = iotlb_alloc_cr(obj, e);
+ if (IS_ERR(cr)) {
+ clk_disable(obj->clk);
+ return PTR_ERR(cr);
+ }
+
+ iotlb_load_cr(obj, cr);
+ kfree(cr);
+
+ if (e->prsvd)
+ l.base++;
+ /* increment victim for next tlb load */
+ if (++l.vict == obj->nr_tlb_entries)
+ l.vict = l.base;
+ iotlb_lock_set(obj, &l);
+out:
+ clk_disable(obj->clk);
+ return err;
+}
+
+#else /* !PREFETCH_IOTLB */
+
+static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
+{
+ return 0;
+}
+
+#endif /* !PREFETCH_IOTLB */
+
+static int prefetch_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
+{
+ return load_iotlb_entry(obj, e);
+}
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+static void flush_iotlb_page(struct omap_iommu *obj, u32 da)
+{
+ int i;
+ struct cr_regs cr;
+
+ clk_enable(obj->clk);
+
+ for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
+ u32 start;
+ size_t bytes;
+
+ if (!iotlb_cr_valid(&cr))
+ continue;
+
+ start = iotlb_cr_to_virt(&cr);
+ bytes = iopgsz_to_bytes(cr.cam & 3);
+
+ if ((start <= da) && (da < start + bytes)) {
+ dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+ __func__, start, da, bytes);
+ iotlb_load_cr(obj, &cr);
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ }
+ }
+ clk_disable(obj->clk);
+
+ if (i == obj->nr_tlb_entries)
+ dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj: target iommu
+ **/
+static void flush_iotlb_all(struct omap_iommu *obj)
+{
+ struct iotlb_lock l;
+
+ clk_enable(obj->clk);
+
+ l.base = 0;
+ l.vict = 0;
+ iotlb_lock_set(obj, &l);
+
+ iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+ clk_disable(obj->clk);
+}
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG) || defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t bytes)
+{
+ if (!obj || !buf)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ bytes = arch_iommu->dump_ctx(obj, buf, bytes);
+
+ clk_disable(obj->clk);
+
+ return bytes;
+}
+EXPORT_SYMBOL_GPL(omap_iommu_dump_ctx);
+
+static int
+__dump_tlb_entries(struct omap_iommu *obj, struct cr_regs *crs, int num)
+{
+ int i;
+ struct iotlb_lock saved;
+ struct cr_regs tmp;
+ struct cr_regs *p = crs;
+
+ clk_enable(obj->clk);
+ iotlb_lock_get(obj, &saved);
+
+ for_each_iotlb_cr(obj, num, i, tmp) {
+ if (!iotlb_cr_valid(&tmp))
+ continue;
+ *p++ = tmp;
+ }
+
+ iotlb_lock_set(obj, &saved);
+ clk_disable(obj->clk);
+
+ return p - crs;
+}
+
+/**
+ * omap_dump_tlb_entries - dump cr arrays to given buffer
+ * @obj: target iommu
+ * @buf: output buffer
+ **/
+size_t omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t bytes)
+{
+ int i, num;
+ struct cr_regs *cr;
+ char *p = buf;
+
+ num = bytes / sizeof(*cr);
+ num = min(obj->nr_tlb_entries, num);
+
+ cr = kcalloc(num, sizeof(*cr), GFP_KERNEL);
+ if (!cr)
+ return 0;
+
+ num = __dump_tlb_entries(obj, cr, num);
+ for (i = 0; i < num; i++)
+ p += iotlb_dump_cr(obj, cr + i, p);
+ kfree(cr);
+
+ return p - buf;
+}
+EXPORT_SYMBOL_GPL(omap_dump_tlb_entries);
+
+int omap_foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+ return driver_for_each_device(&omap_iommu_driver.driver,
+ NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(omap_foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ * H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+ /* Note: freed iopte's must be clean ready for re-use */
+ kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct omap_iommu *obj, u32 *iopgd, u32 da)
+{
+ u32 *iopte;
+
+ /* a table has already existed */
+ if (*iopgd)
+ goto pte_ready;
+
+ /*
+ * do the allocation outside the page table lock
+ */
+ spin_unlock(&obj->page_table_lock);
+ iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+ spin_lock(&obj->page_table_lock);
+
+ if (!*iopgd) {
+ if (!iopte)
+ return ERR_PTR(-ENOMEM);
+
+ *iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+ flush_iopgd_range(iopgd, iopgd);
+
+ dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+ } else {
+ /* We raced, free the reduniovant table */
+ iopte_free(iopte);
+ }
+
+pte_ready:
+ iopte = iopte_offset(iopgd, da);
+
+ dev_vdbg(obj->dev,
+ "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+ __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+ return iopte;
+}
+
+static int iopgd_alloc_section(struct omap_iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+
+ if ((da | pa) & ~IOSECTION_MASK) {
+ dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+ __func__, da, pa, IOSECTION_SIZE);
+ return -EINVAL;
+ }
+
+ *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+ flush_iopgd_range(iopgd, iopgd);
+ return 0;
+}
+
+static int iopgd_alloc_super(struct omap_iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ int i;
+
+ if ((da | pa) & ~IOSUPER_MASK) {
+ dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+ __func__, da, pa, IOSUPER_SIZE);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 16; i++)
+ *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+ flush_iopgd_range(iopgd, iopgd + 15);
+ return 0;
+}
+
+static int iopte_alloc_page(struct omap_iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+ flush_iopte_range(iopte, iopte);
+
+ dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+ __func__, da, pa, iopte, *iopte);
+
+ return 0;
+}
+
+static int iopte_alloc_large(struct omap_iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+ int i;
+
+ if ((da | pa) & ~IOLARGE_MASK) {
+ dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+ __func__, da, pa, IOLARGE_SIZE);
+ return -EINVAL;
+ }
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ for (i = 0; i < 16; i++)
+ *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+ flush_iopte_range(iopte, iopte + 15);
+ return 0;
+}
+
+static int
+iopgtable_store_entry_core(struct omap_iommu *obj, struct iotlb_entry *e)
+{
+ int (*fn)(struct omap_iommu *, u32, u32, u32);
+ u32 prot;
+ int err;
+
+ if (!obj || !e)
+ return -EINVAL;
+
+ switch (e->pgsz) {
+ case MMU_CAM_PGSZ_16M:
+ fn = iopgd_alloc_super;
+ break;
+ case MMU_CAM_PGSZ_1M:
+ fn = iopgd_alloc_section;
+ break;
+ case MMU_CAM_PGSZ_64K:
+ fn = iopte_alloc_large;
+ break;
+ case MMU_CAM_PGSZ_4K:
+ fn = iopte_alloc_page;
+ break;
+ default:
+ fn = NULL;
+ BUG();
+ break;
+ }
+
+ prot = get_iopte_attr(e);
+
+ spin_lock(&obj->page_table_lock);
+ err = fn(obj, e->da, e->pa, prot);
+ spin_unlock(&obj->page_table_lock);
+
+ return err;
+}
+
+/**
+ * omap_iopgtable_store_entry - Make an iommu pte entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+int omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e)
+{
+ int err;
+
+ flush_iotlb_page(obj, e->da);
+ err = iopgtable_store_entry_core(obj, e);
+ if (!err)
+ prefetch_iotlb_entry(obj, e);
+ return err;
+}
+EXPORT_SYMBOL_GPL(omap_iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ * @ppgd: iommu pgd entry pointer to be returned
+ * @ppte: iommu pte entry pointer to be returned
+ **/
+static void
+iopgtable_lookup_entry(struct omap_iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+ u32 *iopgd, *iopte = NULL;
+
+ iopgd = iopgd_offset(obj, da);
+ if (!*iopgd)
+ goto out;
+
+ if (iopgd_is_table(*iopgd))
+ iopte = iopte_offset(iopgd, da);
+out:
+ *ppgd = iopgd;
+ *ppte = iopte;
+}
+
+static size_t iopgtable_clear_entry_core(struct omap_iommu *obj, u32 da)
+{
+ size_t bytes;
+ u32 *iopgd = iopgd_offset(obj, da);
+ int nent = 1;
+
+ if (!*iopgd)
+ return 0;
+
+ if (iopgd_is_table(*iopgd)) {
+ int i;
+ u32 *iopte = iopte_offset(iopgd, da);
+
+ bytes = IOPTE_SIZE;
+ if (*iopte & IOPTE_LARGE) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopte = iopte_offset(iopgd, (da & IOLARGE_MASK));
+ }
+ bytes *= nent;
+ memset(iopte, 0, nent * sizeof(*iopte));
+ flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+ /*
+ * do table walk to check if this table is necessary or not
+ */
+ iopte = iopte_offset(iopgd, 0);
+ for (i = 0; i < PTRS_PER_IOPTE; i++)
+ if (iopte[i])
+ goto out;
+
+ iopte_free(iopte);
+ nent = 1; /* for the next L1 entry */
+ } else {
+ bytes = IOPGD_SIZE;
+ if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopgd = iopgd_offset(obj, (da & IOSUPER_MASK));
+ }
+ bytes *= nent;
+ }
+ memset(iopgd, 0, nent * sizeof(*iopgd));
+ flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+ return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ **/
+static size_t iopgtable_clear_entry(struct omap_iommu *obj, u32 da)
+{
+ size_t bytes;
+
+ spin_lock(&obj->page_table_lock);
+
+ bytes = iopgtable_clear_entry_core(obj, da);
+ flush_iotlb_page(obj, da);
+
+ spin_unlock(&obj->page_table_lock);
+
+ return bytes;
+}
+
+static void iopgtable_clear_entry_all(struct omap_iommu *obj)
+{
+ int i;
+
+ spin_lock(&obj->page_table_lock);
+
+ for (i = 0; i < PTRS_PER_IOPGD; i++) {
+ u32 da;
+ u32 *iopgd;
+
+ da = i << IOPGD_SHIFT;
+ iopgd = iopgd_offset(obj, da);
+
+ if (!*iopgd)
+ continue;
+
+ if (iopgd_is_table(*iopgd))
+ iopte_free(iopte_offset(iopgd, 0));
+
+ *iopgd = 0;
+ flush_iopgd_range(iopgd, iopgd);
+ }
+
+ flush_iotlb_all(obj);
+
+ spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ * Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+ u32 da, errs;
+ u32 *iopgd, *iopte;
+ struct omap_iommu *obj = data;
+ struct iommu_domain *domain = obj->domain;
+
+ if (!obj->refcount)
+ return IRQ_NONE;
+
+ clk_enable(obj->clk);
+ errs = iommu_report_fault(obj, &da);
+ clk_disable(obj->clk);
+ if (errs == 0)
+ return IRQ_HANDLED;
+
+ /* Fault callback or TLB/PTE Dynamic loading */
+ if (!report_iommu_fault(domain, obj->dev, da, 0))
+ return IRQ_HANDLED;
+
+ iommu_disable(obj);
+
+ iopgd = iopgd_offset(obj, da);
+
+ if (!iopgd_is_table(*iopgd)) {
+ dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p "
+ "*pgd:px%08x\n", obj->name, errs, da, iopgd, *iopgd);
+ return IRQ_NONE;
+ }
+
+ iopte = iopte_offset(iopgd, da);
+
+ dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p *pgd:0x%08x "
+ "pte:0x%p *pte:0x%08x\n", obj->name, errs, da, iopgd, *iopgd,
+ iopte, *iopte);
+
+ return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+ struct omap_iommu *obj = to_iommu(dev);
+ const char *name = data;
+
+ pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+ return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * omap_find_iommu_device() - find an omap iommu device by name
+ * @name: name of the iommu device
+ *
+ * The generic iommu API requires the caller to provide the device
+ * he wishes to attach to a certain iommu domain.
+ *
+ * Drivers generally should not bother with this as it should just
+ * be taken care of by the DMA-API using dev_archdata.
+ *
+ * This function is provided as an interim solution until the latter
+ * materializes, and omap3isp is fully migrated to the DMA-API.
+ */
+struct device *omap_find_iommu_device(const char *name)
+{
+ return driver_find_device(&omap_iommu_driver.driver, NULL,
+ (void *)name,
+ device_match_by_alias);
+}
+EXPORT_SYMBOL_GPL(omap_find_iommu_device);
+
+/**
+ * omap_iommu_attach() - attach iommu device to an iommu domain
+ * @dev: target omap iommu device
+ * @iopgd: page table
+ **/
+static struct omap_iommu *omap_iommu_attach(struct device *dev, u32 *iopgd)
+{
+ int err = -ENOMEM;
+ struct omap_iommu *obj = to_iommu(dev);
+
+ spin_lock(&obj->iommu_lock);
+
+ /* an iommu device can only be attached once */
+ if (++obj->refcount > 1) {
+ dev_err(dev, "%s: already attached!\n", obj->name);
+ err = -EBUSY;
+ goto err_enable;
+ }
+
+ obj->iopgd = iopgd;
+ err = iommu_enable(obj);
+ if (err)
+ goto err_enable;
+ flush_iotlb_all(obj);
+
+ if (!try_module_get(obj->owner))
+ goto err_module;
+
+ spin_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+ return obj;
+
+err_module:
+ if (obj->refcount == 1)
+ iommu_disable(obj);
+err_enable:
+ obj->refcount--;
+ spin_unlock(&obj->iommu_lock);
+ return ERR_PTR(err);
+}
+
+/**
+ * omap_iommu_detach - release iommu device
+ * @obj: target iommu
+ **/
+static void omap_iommu_detach(struct omap_iommu *obj)
+{
+ if (!obj || IS_ERR(obj))
+ return;
+
+ spin_lock(&obj->iommu_lock);
+
+ if (--obj->refcount == 0)
+ iommu_disable(obj);
+
+ module_put(obj->owner);
+
+ obj->iopgd = NULL;
+
+ spin_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+
+/*
+ * OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ int irq;
+ struct omap_iommu *obj;
+ struct resource *res;
+ struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+ if (pdev->num_resources != 2)
+ return -EINVAL;
+
+ obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+ if (IS_ERR(obj->clk))
+ goto err_clk;
+
+ obj->nr_tlb_entries = pdata->nr_tlb_entries;
+ obj->name = pdata->name;
+ obj->dev = &pdev->dev;
+ obj->ctx = (void *)obj + sizeof(*obj);
+ obj->da_start = pdata->da_start;
+ obj->da_end = pdata->da_end;
+
+ spin_lock_init(&obj->iommu_lock);
+ mutex_init(&obj->mmap_lock);
+ spin_lock_init(&obj->page_table_lock);
+ INIT_LIST_HEAD(&obj->mmap);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENODEV;
+ goto err_mem;
+ }
+
+ res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!res) {
+ err = -EIO;
+ goto err_mem;
+ }
+
+ obj->regbase = ioremap(res->start, resource_size(res));
+ if (!obj->regbase) {
+ err = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ err = -ENODEV;
+ goto err_irq;
+ }
+ err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+ dev_name(&pdev->dev), obj);
+ if (err < 0)
+ goto err_irq;
+ platform_set_drvdata(pdev, obj);
+
+ dev_info(&pdev->dev, "%s registered\n", obj->name);
+ return 0;
+
+err_irq:
+ iounmap(obj->regbase);
+err_ioremap:
+ release_mem_region(res->start, resource_size(res));
+err_mem:
+ clk_put(obj->clk);
+err_clk:
+ kfree(obj);
+ return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+ int irq;
+ struct resource *res;
+ struct omap_iommu *obj = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ iopgtable_clear_entry_all(obj);
+
+ irq = platform_get_irq(pdev, 0);
+ free_irq(irq, obj);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+ iounmap(obj->regbase);
+
+ clk_put(obj->clk);
+ dev_info(&pdev->dev, "%s removed\n", obj->name);
+ kfree(obj);
+ return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+ .probe = omap_iommu_probe,
+ .remove = __devexit_p(omap_iommu_remove),
+ .driver = {
+ .name = "omap-iommu",
+ },
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+ clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int omap_iommu_map(struct iommu_domain *domain, unsigned long da,
+ phys_addr_t pa, int order, int prot)
+{
+ struct omap_iommu_domain *omap_domain = domain->priv;
+ struct omap_iommu *oiommu = omap_domain->iommu_dev;
+ struct device *dev = oiommu->dev;
+ size_t bytes = PAGE_SIZE << order;
+ struct iotlb_entry e;
+ int omap_pgsz;
+ u32 ret, flags;
+
+ /* we only support mapping a single iommu page for now */
+ omap_pgsz = bytes_to_iopgsz(bytes);
+ if (omap_pgsz < 0) {
+ dev_err(dev, "invalid size to map: %d\n", bytes);
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "mapping da 0x%lx to pa 0x%x size 0x%x\n", da, pa, bytes);
+
+ flags = omap_pgsz | prot;
+
+ iotlb_init_entry(&e, da, pa, flags);
+
+ ret = omap_iopgtable_store_entry(oiommu, &e);
+ if (ret)
+ dev_err(dev, "omap_iopgtable_store_entry failed: %d\n", ret);
+
+ return ret;
+}
+
+static int omap_iommu_unmap(struct iommu_domain *domain, unsigned long da,
+ int order)
+{
+ struct omap_iommu_domain *omap_domain = domain->priv;
+ struct omap_iommu *oiommu = omap_domain->iommu_dev;
+ struct device *dev = oiommu->dev;
+ size_t unmap_size;
+
+ dev_dbg(dev, "unmapping da 0x%lx order %d\n", da, order);
+
+ unmap_size = iopgtable_clear_entry(oiommu, da);
+
+ return unmap_size ? get_order(unmap_size) : -EINVAL;
+}
+
+static int
+omap_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
+{
+ struct omap_iommu_domain *omap_domain = domain->priv;
+ struct omap_iommu *oiommu;
+ int ret = 0;
+
+ spin_lock(&omap_domain->lock);
+
+ /* only a single device is supported per domain for now */
+ if (omap_domain->iommu_dev) {
+ dev_err(dev, "iommu domain is already attached\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* get a handle to and enable the omap iommu */
+ oiommu = omap_iommu_attach(dev, omap_domain->pgtable);
+ if (IS_ERR(oiommu)) {
+ ret = PTR_ERR(oiommu);
+ dev_err(dev, "can't get omap iommu: %d\n", ret);
+ goto out;
+ }
+
+ omap_domain->iommu_dev = oiommu;
+ oiommu->domain = domain;
+
+out:
+ spin_unlock(&omap_domain->lock);
+ return ret;
+}
+
+static void omap_iommu_detach_dev(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct omap_iommu_domain *omap_domain = domain->priv;
+ struct omap_iommu *oiommu = to_iommu(dev);
+
+ spin_lock(&omap_domain->lock);
+
+ /* only a single device is supported per domain for now */
+ if (omap_domain->iommu_dev != oiommu) {
+ dev_err(dev, "invalid iommu device\n");
+ goto out;
+ }
+
+ iopgtable_clear_entry_all(oiommu);
+
+ omap_iommu_detach(oiommu);
+
+ omap_domain->iommu_dev = NULL;
+
+out:
+ spin_unlock(&omap_domain->lock);
+}
+
+static int omap_iommu_domain_init(struct iommu_domain *domain)
+{
+ struct omap_iommu_domain *omap_domain;
+
+ omap_domain = kzalloc(sizeof(*omap_domain), GFP_KERNEL);
+ if (!omap_domain) {
+ pr_err("kzalloc failed\n");
+ goto out;
+ }
+
+ omap_domain->pgtable = kzalloc(IOPGD_TABLE_SIZE, GFP_KERNEL);
+ if (!omap_domain->pgtable) {
+ pr_err("kzalloc failed\n");
+ goto fail_nomem;
+ }
+
+ /*
+ * should never fail, but please keep this around to ensure
+ * we keep the hardware happy
+ */
+ BUG_ON(!IS_ALIGNED((long)omap_domain->pgtable, IOPGD_TABLE_SIZE));
+
+ clean_dcache_area(omap_domain->pgtable, IOPGD_TABLE_SIZE);
+ spin_lock_init(&omap_domain->lock);
+
+ domain->priv = omap_domain;
+
+ return 0;
+
+fail_nomem:
+ kfree(omap_domain);
+out:
+ return -ENOMEM;
+}
+
+/* assume device was already detached */
+static void omap_iommu_domain_destroy(struct iommu_domain *domain)
+{
+ struct omap_iommu_domain *omap_domain = domain->priv;
+
+ domain->priv = NULL;
+
+ kfree(omap_domain->pgtable);
+ kfree(omap_domain);
+}
+
+static phys_addr_t omap_iommu_iova_to_phys(struct iommu_domain *domain,
+ unsigned long da)
+{
+ struct omap_iommu_domain *omap_domain = domain->priv;
+ struct omap_iommu *oiommu = omap_domain->iommu_dev;
+ struct device *dev = oiommu->dev;
+ u32 *pgd, *pte;
+ phys_addr_t ret = 0;
+
+ iopgtable_lookup_entry(oiommu, da, &pgd, &pte);
+
+ if (pte) {
+ if (iopte_is_small(*pte))
+ ret = omap_iommu_translate(*pte, da, IOPTE_MASK);
+ else if (iopte_is_large(*pte))
+ ret = omap_iommu_translate(*pte, da, IOLARGE_MASK);
+ else
+ dev_err(dev, "bogus pte 0x%x", *pte);
+ } else {
+ if (iopgd_is_section(*pgd))
+ ret = omap_iommu_translate(*pgd, da, IOSECTION_MASK);
+ else if (iopgd_is_super(*pgd))
+ ret = omap_iommu_translate(*pgd, da, IOSUPER_MASK);
+ else
+ dev_err(dev, "bogus pgd 0x%x", *pgd);
+ }
+
+ return ret;
+}
+
+static int omap_iommu_domain_has_cap(struct iommu_domain *domain,
+ unsigned long cap)
+{
+ return 0;
+}
+
+static struct iommu_ops omap_iommu_ops = {
+ .domain_init = omap_iommu_domain_init,
+ .domain_destroy = omap_iommu_domain_destroy,
+ .attach_dev = omap_iommu_attach_dev,
+ .detach_dev = omap_iommu_detach_dev,
+ .map = omap_iommu_map,
+ .unmap = omap_iommu_unmap,
+ .iova_to_phys = omap_iommu_iova_to_phys,
+ .domain_has_cap = omap_iommu_domain_has_cap,
+};
+
+static int __init omap_iommu_init(void)
+{
+ struct kmem_cache *p;
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ size_t align = 1 << 10; /* L2 pagetable alignement */
+
+ p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+ iopte_cachep_ctor);
+ if (!p)
+ return -ENOMEM;
+ iopte_cachep = p;
+
+ bus_set_iommu(&platform_bus_type, &omap_iommu_ops);
+
+ return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+ kmem_cache_destroy(iopte_cachep);
+
+ platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c
new file mode 100644
index 0000000..e8fdb88
--- /dev/null
+++ b/drivers/iommu/omap-iovmm.c
@@ -0,0 +1,742 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+#include <linux/iommu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
+
+#include <plat/iopgtable.h>
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return the offset of the first scatterlist entry in a sg table */
+static unsigned int sgtable_offset(const struct sg_table *sgt)
+{
+ if (!sgt || !sgt->nents)
+ return 0;
+
+ return sgt->sgl->offset;
+}
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+ unsigned int i, total = 0;
+ struct scatterlist *sg;
+
+ if (!sgt)
+ return 0;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+
+ bytes = sg->length + sg->offset;
+
+ if (!iopgsz_ok(bytes)) {
+ pr_err("%s: sg[%d] not iommu pagesize(%u %u)\n",
+ __func__, i, bytes, sg->offset);
+ return 0;
+ }
+
+ if (i && sg->offset) {
+ pr_err("%s: sg[%d] offset not allowed in internal "
+ "entries\n", __func__, i);
+ return 0;
+ }
+
+ total += bytes;
+ }
+
+ return total;
+}
+#define sgtable_ok(x) (!!sgtable_len(x))
+
+static unsigned max_alignment(u32 addr)
+{
+ int i;
+ unsigned pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+ for (i = 0; i < ARRAY_SIZE(pagesize) && addr & (pagesize[i] - 1); i++)
+ ;
+ return (i < ARRAY_SIZE(pagesize)) ? pagesize[i] : 0;
+}
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned sgtable_nents(size_t bytes, u32 da, u32 pa)
+{
+ unsigned nr_entries = 0, ent_sz;
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+ pr_err("%s: wrong size %08x\n", __func__, bytes);
+ return 0;
+ }
+
+ while (bytes) {
+ ent_sz = max_alignment(da | pa);
+ ent_sz = min_t(unsigned, ent_sz, iopgsz_max(bytes));
+ nr_entries++;
+ da += ent_sz;
+ pa += ent_sz;
+ bytes -= ent_sz;
+ }
+
+ return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags,
+ u32 da, u32 pa)
+{
+ unsigned int nr_entries;
+ int err;
+ struct sg_table *sgt;
+
+ if (!bytes)
+ return ERR_PTR(-EINVAL);
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE))
+ return ERR_PTR(-EINVAL);
+
+ if (flags & IOVMF_LINEAR) {
+ nr_entries = sgtable_nents(bytes, da, pa);
+ if (!nr_entries)
+ return ERR_PTR(-EINVAL);
+ } else
+ nr_entries = bytes / PAGE_SIZE;
+
+ sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+ if (!sgt)
+ return ERR_PTR(-ENOMEM);
+
+ err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+ if (err) {
+ kfree(sgt);
+ return ERR_PTR(err);
+ }
+
+ pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+ return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+ if (!sgt)
+ return;
+
+ sg_free_table(sgt);
+ kfree(sgt);
+
+ pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+ u32 va;
+ size_t total;
+ unsigned int i;
+ struct scatterlist *sg;
+ struct vm_struct *new;
+ const struct mem_type *mtype;
+
+ mtype = get_mem_type(MT_DEVICE);
+ if (!mtype)
+ return ERR_PTR(-EINVAL);
+
+ total = sgtable_len(sgt);
+ if (!total)
+ return ERR_PTR(-EINVAL);
+
+ new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+ va = (u32)new->addr;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+ u32 pa;
+ int err;
+
+ pa = sg_phys(sg) - sg->offset;
+ bytes = sg->length + sg->offset;
+
+ BUG_ON(bytes != PAGE_SIZE);
+
+ err = ioremap_page(va, pa, mtype);
+ if (err)
+ goto err_out;
+
+ va += bytes;
+ }
+
+ flush_cache_vmap((unsigned long)new->addr,
+ (unsigned long)(new->addr + total));
+ return new->addr;
+
+err_out:
+ WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+ vunmap(new->addr);
+ return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+ vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct omap_iommu *obj,
+ const u32 da)
+{
+ struct iovm_struct *tmp;
+
+ list_for_each_entry(tmp, &obj->mmap, list) {
+ if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+ size_t len;
+
+ len = tmp->da_end - tmp->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+ __func__, tmp->da_start, da, tmp->da_end, len,
+ tmp->flags);
+
+ return tmp;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * omap_find_iovm_area - find iovma which includes @da
+ * @da: iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *omap_find_iovm_area(struct omap_iommu *obj, u32 da)
+{
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+ area = __find_iovm_area(obj, da);
+ mutex_unlock(&obj->mmap_lock);
+
+ return area;
+}
+EXPORT_SYMBOL_GPL(omap_find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct omap_iommu *obj, u32 da,
+ size_t bytes, u32 flags)
+{
+ struct iovm_struct *new, *tmp;
+ u32 start, prev_end, alignment;
+
+ if (!obj || !bytes)
+ return ERR_PTR(-EINVAL);
+
+ start = da;
+ alignment = PAGE_SIZE;
+
+ if (~flags & IOVMF_DA_FIXED) {
+ /* Don't map address 0 */
+ start = obj->da_start ? obj->da_start : alignment;
+
+ if (flags & IOVMF_LINEAR)
+ alignment = iopgsz_max(bytes);
+ start = roundup(start, alignment);
+ } else if (start < obj->da_start || start > obj->da_end ||
+ obj->da_end - start < bytes) {
+ return ERR_PTR(-EINVAL);
+ }
+
+ tmp = NULL;
+ if (list_empty(&obj->mmap))
+ goto found;
+
+ prev_end = 0;
+ list_for_each_entry(tmp, &obj->mmap, list) {
+
+ if (prev_end > start)
+ break;
+
+ if (tmp->da_start > start && (tmp->da_start - start) >= bytes)
+ goto found;
+
+ if (tmp->da_end >= start && ~flags & IOVMF_DA_FIXED)
+ start = roundup(tmp->da_end + 1, alignment);
+
+ prev_end = tmp->da_end;
+ }
+
+ if ((start >= prev_end) && (obj->da_end - start >= bytes))
+ goto found;
+
+ dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+ __func__, da, bytes, flags);
+
+ return ERR_PTR(-EINVAL);
+
+found:
+ new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+
+ new->iommu = obj;
+ new->da_start = start;
+ new->da_end = start + bytes;
+ new->flags = flags;
+
+ /*
+ * keep ascending order of iovmas
+ */
+ if (tmp)
+ list_add_tail(&new->list, &tmp->list);
+ else
+ list_add(&new->list, &obj->mmap);
+
+ dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+ __func__, new->da_start, start, new->da_end, bytes, flags);
+
+ return new;
+}
+
+static void free_iovm_area(struct omap_iommu *obj, struct iovm_struct *area)
+{
+ size_t bytes;
+
+ BUG_ON(!obj || !area);
+
+ bytes = area->da_end - area->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+ __func__, area->da_start, area->da_end, bytes, area->flags);
+
+ list_del(&area->list);
+ kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * omap_da_to_va - convert (d) to (v)
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ * @va: mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *omap_da_to_va(struct omap_iommu *obj, u32 da)
+{
+ void *va = NULL;
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+ va = area->va;
+out:
+ mutex_unlock(&obj->mmap_lock);
+
+ return va;
+}
+EXPORT_SYMBOL_GPL(omap_da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+ unsigned int i;
+ struct scatterlist *sg;
+ void *va = _va;
+ void *va_end;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ struct page *pg;
+ const size_t bytes = PAGE_SIZE;
+
+ /*
+ * iommu 'superpage' isn't supported with 'omap_iommu_vmalloc()'
+ */
+ pg = vmalloc_to_page(va);
+ BUG_ON(!pg);
+ sg_set_page(sg, pg, bytes, 0);
+
+ va += bytes;
+ }
+
+ va_end = _va + PAGE_SIZE * i;
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+ /*
+ * Actually this is not necessary at all, just exists for
+ * consistency of the code readability.
+ */
+ BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu_domain *domain, struct iovm_struct *new,
+ const struct sg_table *sgt, u32 flags)
+{
+ int err;
+ unsigned int i, j;
+ struct scatterlist *sg;
+ u32 da = new->da_start;
+ int order;
+
+ if (!domain || !sgt)
+ return -EINVAL;
+
+ BUG_ON(!sgtable_ok(sgt));
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ u32 pa;
+ size_t bytes;
+
+ pa = sg_phys(sg) - sg->offset;
+ bytes = sg->length + sg->offset;
+
+ flags &= ~IOVMF_PGSZ_MASK;
+
+ if (bytes_to_iopgsz(bytes) < 0)
+ goto err_out;
+
+ order = get_order(bytes);
+
+ pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+ i, da, pa, bytes);
+
+ err = iommu_map(domain, da, pa, order, flags);
+ if (err)
+ goto err_out;
+
+ da += bytes;
+ }
+ return 0;
+
+err_out:
+ da = new->da_start;
+
+ for_each_sg(sgt->sgl, sg, i, j) {
+ size_t bytes;
+
+ bytes = sg->length + sg->offset;
+ order = get_order(bytes);
+
+ /* ignore failures.. we're already handling one */
+ iommu_unmap(domain, da, order);
+
+ da += bytes;
+ }
+ return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu_domain *domain, struct omap_iommu *obj,
+ struct iovm_struct *area)
+{
+ u32 start;
+ size_t total = area->da_end - area->da_start;
+ const struct sg_table *sgt = area->sgt;
+ struct scatterlist *sg;
+ int i, err;
+
+ BUG_ON(!sgtable_ok(sgt));
+ BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+ start = area->da_start;
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+ int order;
+
+ bytes = sg->length + sg->offset;
+ order = get_order(bytes);
+
+ err = iommu_unmap(domain, start, order);
+ if (err < 0)
+ break;
+
+ dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+ __func__, start, bytes, area->flags);
+
+ BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+ total -= bytes;
+ start += bytes;
+ }
+ BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu_domain *domain,
+ struct omap_iommu *obj, const u32 da,
+ void (*fn)(const void *), u32 flags)
+{
+ struct sg_table *sgt = NULL;
+ struct iovm_struct *area;
+
+ if (!IS_ALIGNED(da, PAGE_SIZE)) {
+ dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+ return NULL;
+ }
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+
+ if ((area->flags & flags) != flags) {
+ dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+ area->flags);
+ goto out;
+ }
+ sgt = (struct sg_table *)area->sgt;
+
+ unmap_iovm_area(domain, obj, area);
+
+ fn(area->va);
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+ area->da_start, da, area->da_end,
+ area->da_end - area->da_start, area->flags);
+
+ free_iovm_area(obj, area);
+out:
+ mutex_unlock(&obj->mmap_lock);
+
+ return sgt;
+}
+
+static u32 map_iommu_region(struct iommu_domain *domain, struct omap_iommu *obj,
+ u32 da, const struct sg_table *sgt, void *va,
+ size_t bytes, u32 flags)
+{
+ int err = -ENOMEM;
+ struct iovm_struct *new;
+
+ mutex_lock(&obj->mmap_lock);
+
+ new = alloc_iovm_area(obj, da, bytes, flags);
+ if (IS_ERR(new)) {
+ err = PTR_ERR(new);
+ goto err_alloc_iovma;
+ }
+ new->va = va;
+ new->sgt = sgt;
+
+ if (map_iovm_area(domain, new, sgt, new->flags))
+ goto err_map;
+
+ mutex_unlock(&obj->mmap_lock);
+
+ dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+ __func__, new->da_start, bytes, new->flags, va);
+
+ return new->da_start;
+
+err_map:
+ free_iovm_area(obj, new);
+err_alloc_iovma:
+ mutex_unlock(&obj->mmap_lock);
+ return err;
+}
+
+static inline u32
+__iommu_vmap(struct iommu_domain *domain, struct omap_iommu *obj,
+ u32 da, const struct sg_table *sgt,
+ void *va, size_t bytes, u32 flags)
+{
+ return map_iommu_region(domain, obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * omap_iommu_vmap - (d)-(p)-(v) address mapper
+ * @obj: objective iommu
+ * @sgt: address of scatter gather table
+ * @flags: iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 omap_iommu_vmap(struct iommu_domain *domain, struct omap_iommu *obj, u32 da,
+ const struct sg_table *sgt, u32 flags)
+{
+ size_t bytes;
+ void *va = NULL;
+
+ if (!obj || !obj->dev || !sgt)
+ return -EINVAL;
+
+ bytes = sgtable_len(sgt);
+ if (!bytes)
+ return -EINVAL;
+ bytes = PAGE_ALIGN(bytes);
+
+ if (flags & IOVMF_MMIO) {
+ va = vmap_sg(sgt);
+ if (IS_ERR(va))
+ return PTR_ERR(va);
+ }
+
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_MMIO;
+
+ da = __iommu_vmap(domain, obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ vunmap_sg(va);
+
+ return da + sgtable_offset(sgt);
+}
+EXPORT_SYMBOL_GPL(omap_iommu_vmap);
+
+/**
+ * omap_iommu_vunmap - release virtual mapping obtained by 'omap_iommu_vmap()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'omap_iommu_vmap()'.
+ */
+struct sg_table *
+omap_iommu_vunmap(struct iommu_domain *domain, struct omap_iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+ /*
+ * 'sgt' is allocated before 'omap_iommu_vmalloc()' is called.
+ * Just returns 'sgt' to the caller to free
+ */
+ da &= PAGE_MASK;
+ sgt = unmap_vm_area(domain, obj, da, vunmap_sg,
+ IOVMF_DISCONT | IOVMF_MMIO);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ return sgt;
+}
+EXPORT_SYMBOL_GPL(omap_iommu_vunmap);
+
+/**
+ * omap_iommu_vmalloc - (d)-(p)-(v) address allocator and mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @bytes: allocation size
+ * @flags: iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_FIXED' is not set.
+ */
+u32
+omap_iommu_vmalloc(struct iommu_domain *domain, struct omap_iommu *obj, u32 da,
+ size_t bytes, u32 flags)
+{
+ void *va;
+ struct sg_table *sgt;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = vmalloc(bytes);
+ if (!va)
+ return -ENOMEM;
+
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_ALLOC;
+
+ sgt = sgtable_alloc(bytes, flags, da, 0);
+ if (IS_ERR(sgt)) {
+ da = PTR_ERR(sgt);
+ goto err_sgt_alloc;
+ }
+ sgtable_fill_vmalloc(sgt, va);
+
+ da = __iommu_vmap(domain, obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ goto err_iommu_vmap;
+
+ return da;
+
+err_iommu_vmap:
+ sgtable_drain_vmalloc(sgt);
+ sgtable_free(sgt);
+err_sgt_alloc:
+ vfree(va);
+ return da;
+}
+EXPORT_SYMBOL_GPL(omap_iommu_vmalloc);
+
+/**
+ * omap_iommu_vfree - release memory allocated by 'omap_iommu_vmalloc()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'omap_iommu_vmalloc()'.
+ */
+void omap_iommu_vfree(struct iommu_domain *domain, struct omap_iommu *obj,
+ const u32 da)
+{
+ struct sg_table *sgt;
+
+ sgt = unmap_vm_area(domain, obj, da, vfree,
+ IOVMF_DISCONT | IOVMF_ALLOC);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(omap_iommu_vfree);
+
+static int __init iovmm_init(void)
+{
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ struct kmem_cache *p;
+
+ p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+ flags, NULL);
+ if (!p)
+ return -ENOMEM;
+ iovm_area_cachep = p;
+
+ return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+ kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 4fb6016..a233ed5 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -5,7 +5,7 @@
menuconfig ISDN
bool "ISDN support"
depends on NET
- depends on !S390
+ depends on !S390 && !UML
---help---
ISDN ("Integrated Services Digital Network", called RNIS in France)
is a fully digital telephone service that can be used for voice and
diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c
index 37e685e..c4897e1 100644
--- a/drivers/isdn/hisax/callc.c
+++ b/drivers/isdn/hisax/callc.c
@@ -65,7 +65,7 @@
return (struct IsdnCardState *) 0;
}
-static __attribute__((format(printf, 3, 4))) void
+static __printf(3, 4) void
link_debug(struct Channel *chanp, int direction, char *fmt, ...)
{
va_list args;
@@ -1068,7 +1068,7 @@
return 0;
}
-static __attribute__((format(printf, 2, 3))) void
+static __printf(2, 3) void
callc_debug(struct FsmInst *fi, char *fmt, ...)
{
va_list args;
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index 0a5c42a..aff45a1 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -1287,9 +1287,9 @@
int HiSax_command(isdn_ctrl * ic);
int HiSax_writebuf_skb(int id, int chan, int ack, struct sk_buff *skb);
-__attribute__((format(printf, 3, 4)))
+__printf(3, 4)
void HiSax_putstatus(struct IsdnCardState *cs, char *head, char *fmt, ...);
-__attribute__((format(printf, 3, 0)))
+__printf(3, 0)
void VHiSax_putstatus(struct IsdnCardState *cs, char *head, char *fmt, va_list args);
void HiSax_reportcard(int cardnr, int sel);
int QuickHex(char *txt, u_char * p, int cnt);
diff --git a/drivers/isdn/hisax/isdnl1.h b/drivers/isdn/hisax/isdnl1.h
index 425d861..66ddcab 100644
--- a/drivers/isdn/hisax/isdnl1.h
+++ b/drivers/isdn/hisax/isdnl1.h
@@ -21,7 +21,7 @@
#define B_XMTBUFREADY 1
#define B_ACKPENDING 2
-__attribute__((format(printf, 2, 3)))
+__printf(2, 3)
void debugl1(struct IsdnCardState *cs, char *fmt, ...);
void DChannel_proc_xmt(struct IsdnCardState *cs);
void DChannel_proc_rcv(struct IsdnCardState *cs);
diff --git a/drivers/isdn/hisax/isdnl3.c b/drivers/isdn/hisax/isdnl3.c
index ad291f2..1c24e44 100644
--- a/drivers/isdn/hisax/isdnl3.c
+++ b/drivers/isdn/hisax/isdnl3.c
@@ -66,7 +66,7 @@
"EV_TIMEOUT",
};
-static __attribute__((format(printf, 2, 3))) void
+static __printf(2, 3) void
l3m_debug(struct FsmInst *fi, char *fmt, ...)
{
va_list args;
diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c
index 4408263..db247b7 100644
--- a/drivers/isdn/hisax/st5481_d.c
+++ b/drivers/isdn/hisax/st5481_d.c
@@ -167,7 +167,7 @@
{ST_L1_F8, EV_IND_RSY, l1_ignore},
};
-static __attribute__((format(printf, 2, 3)))
+static __printf(2, 3)
void l1m_debug(struct FsmInst *fi, char *fmt, ...)
{
va_list args;
@@ -270,7 +270,7 @@
"EV_DOUT_UNDERRUN",
};
-static __attribute__((format(printf, 2, 3)))
+static __printf(2, 3)
void dout_debug(struct FsmInst *fi, char *fmt, ...)
{
va_list args;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 807c875..ff203a4 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -113,14 +113,6 @@
help
This option enables support for the PCEngines WRAP programmable LEDs.
-config LEDS_ALIX2
- tristate "LED Support for ALIX.2 and ALIX.3 series"
- depends on LEDS_CLASS
- depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
- help
- This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
- You have to set leds-alix2.force=1 for boards with Award BIOS.
-
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
depends on LEDS_CLASS
@@ -383,6 +375,18 @@
cannot be used. This driver supports hardware blinking with an on+off
period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
+config LEDS_RENESAS_TPU
+ bool "LED support for Renesas TPU"
+ depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
+ help
+ This option enables build of the LED TPU platform driver,
+ suitable to drive any TPU channel on newer Renesas SoCs.
+ The driver controls the GPIO pin connected to the LED via
+ the GPIO framework and expects the LED to be connected to
+ a pin that can be driven in both GPIO mode and using TPU
+ pin function. The latter to support brightness control.
+ Brightness control is supported but hardware blinking is not.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bbfd2e3..e4f6bf5 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -16,7 +16,6 @@
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_NET5501) += leds-net5501.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
-obj-$(CONFIG_LEDS_ALIX2) += leds-alix2.o
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
@@ -43,6 +42,7 @@
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
+obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index dc3d3d8..661b692 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -267,9 +267,14 @@
unsigned long *delay_on,
unsigned long *delay_off)
{
+ del_timer_sync(&led_cdev->blink_timer);
+
if (led_cdev->blink_set &&
- !led_cdev->blink_set(led_cdev, delay_on, delay_off))
+ !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
+ led_cdev->blink_delay_on = *delay_on;
+ led_cdev->blink_delay_off = *delay_off;
return;
+ }
/* blink with 1 Hz as default if nothing specified */
if (!*delay_on && !*delay_off)
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 4bebae7..6f1ff93 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -261,9 +261,12 @@
if (trigger) {
trigger->name = name;
err = led_trigger_register(trigger);
- if (err < 0)
+ if (err < 0) {
+ kfree(trigger);
+ trigger = NULL;
printk(KERN_WARNING "LED trigger %s failed to register"
" (%d)\n", name, err);
+ }
} else
printk(KERN_WARNING "LED trigger %s failed to register"
" (no memory)\n", name);
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
deleted file mode 100644
index f59ffad..0000000
--- a/drivers/leds/leds-alix2.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * LEDs driver for PCEngines ALIX.2 and ALIX.3
- *
- * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-
-static int force = 0;
-module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
-
-#define MSR_LBAR_GPIO 0x5140000C
-#define CS5535_GPIO_SIZE 256
-
-static u32 gpio_base;
-
-static struct pci_device_id divil_pci[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
- { } /* NULL entry */
-};
-MODULE_DEVICE_TABLE(pci, divil_pci);
-
-struct alix_led {
- struct led_classdev cdev;
- unsigned short port;
- unsigned int on_value;
- unsigned int off_value;
-};
-
-static void alix_led_set(struct led_classdev *led_cdev,
- enum led_brightness brightness)
-{
- struct alix_led *led_dev =
- container_of(led_cdev, struct alix_led, cdev);
-
- if (brightness)
- outl(led_dev->on_value, gpio_base + led_dev->port);
- else
- outl(led_dev->off_value, gpio_base + led_dev->port);
-}
-
-static struct alix_led alix_leds[] = {
- {
- .cdev = {
- .name = "alix:1",
- .brightness_set = alix_led_set,
- },
- .port = 0x00,
- .on_value = 1 << 22,
- .off_value = 1 << 6,
- },
- {
- .cdev = {
- .name = "alix:2",
- .brightness_set = alix_led_set,
- },
- .port = 0x80,
- .on_value = 1 << 25,
- .off_value = 1 << 9,
- },
- {
- .cdev = {
- .name = "alix:3",
- .brightness_set = alix_led_set,
- },
- .port = 0x80,
- .on_value = 1 << 27,
- .off_value = 1 << 11,
- },
-};
-
-static int __init alix_led_probe(struct platform_device *pdev)
-{
- int i;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(alix_leds); i++) {
- alix_leds[i].cdev.flags |= LED_CORE_SUSPENDRESUME;
- ret = led_classdev_register(&pdev->dev, &alix_leds[i].cdev);
- if (ret < 0)
- goto fail;
- }
- return 0;
-
-fail:
- while (--i >= 0)
- led_classdev_unregister(&alix_leds[i].cdev);
- return ret;
-}
-
-static int alix_led_remove(struct platform_device *pdev)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(alix_leds); i++)
- led_classdev_unregister(&alix_leds[i].cdev);
- return 0;
-}
-
-static struct platform_driver alix_led_driver = {
- .remove = alix_led_remove,
- .driver = {
- .name = KBUILD_MODNAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init alix_present(unsigned long bios_phys,
- const char *alix_sig,
- size_t alix_sig_len)
-{
- const size_t bios_len = 0x00010000;
- const char *bios_virt;
- const char *scan_end;
- const char *p;
- char name[64];
-
- if (force) {
- printk(KERN_NOTICE "%s: forced to skip BIOS test, "
- "assume system has ALIX.2 style LEDs\n",
- KBUILD_MODNAME);
- return 1;
- }
-
- bios_virt = phys_to_virt(bios_phys);
- scan_end = bios_virt + bios_len - (alix_sig_len + 2);
- for (p = bios_virt; p < scan_end; p++) {
- const char *tail;
- char *a;
-
- if (memcmp(p, alix_sig, alix_sig_len) != 0)
- continue;
-
- memcpy(name, p, sizeof(name));
-
- /* remove the first \0 character from string */
- a = strchr(name, '\0');
- if (a)
- *a = ' ';
-
- /* cut the string at a newline */
- a = strchr(name, '\r');
- if (a)
- *a = '\0';
-
- tail = p + alix_sig_len;
- if ((tail[0] == '2' || tail[0] == '3')) {
- printk(KERN_INFO
- "%s: system is recognized as \"%s\"\n",
- KBUILD_MODNAME, name);
- return 1;
- }
- }
-
- return 0;
-}
-
-static struct platform_device *pdev;
-
-static int __init alix_pci_led_init(void)
-{
- u32 low, hi;
-
- if (pci_dev_present(divil_pci) == 0) {
- printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n");
- return -ENODEV;
- }
-
- /* Grab the GPIO I/O range */
- rdmsr(MSR_LBAR_GPIO, low, hi);
-
- /* Check the mask and whether GPIO is enabled (sanity check) */
- if (hi != 0x0000f001) {
- printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n");
- return -ENODEV;
- }
-
- /* Mask off the IO base address */
- gpio_base = low & 0x0000ff00;
-
- if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) {
- printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n");
- return -ENODEV;
- }
-
- /* Set GPIO function to output */
- outl(1 << 6, gpio_base + 0x04);
- outl(1 << 9, gpio_base + 0x84);
- outl(1 << 11, gpio_base + 0x84);
-
- return 0;
-}
-
-static int __init alix_led_init(void)
-{
- int ret = -ENODEV;
- const char tinybios_sig[] = "PC Engines ALIX.";
- const char coreboot_sig[] = "PC Engines\0ALIX.";
-
- if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
- alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
- ret = alix_pci_led_init();
-
- if (ret < 0)
- return ret;
-
- pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
- if (!IS_ERR(pdev)) {
- ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
- if (ret)
- platform_device_unregister(pdev);
- } else
- ret = PTR_ERR(pdev);
-
- return ret;
-}
-
-static void __exit alix_led_exit(void)
-{
- platform_device_unregister(pdev);
- platform_driver_unregister(&alix_led_driver);
- release_region(gpio_base, CS5535_GPIO_SIZE);
-}
-
-module_init(alix_led_init);
-module_exit(alix_led_exit);
-
-MODULE_AUTHOR("Constantin Baranov <const@mimas.ru>");
-MODULE_DESCRIPTION("PCEngines ALIX.2 and ALIX.3 LED driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index 22f847c..fbd5d88 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -107,9 +107,10 @@
}
led->cdev->name = led->name;
- led->cdev->default_trigger = led->default_trigger;
+ led->cdev->flags = LED_CORE_SUSPENDRESUME;
led->cdev->brightness_set = brightness_set;
led->cdev->blink_set = blink_set;
+ led->cdev->default_trigger = led->default_trigger;
ret = led_classdev_register(&pdev->dev, led->cdev);
if (ret < 0)
@@ -136,12 +137,44 @@
return mfd_cell_disable(pdev);
}
+static int asic3_led_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->suspend)
+ ret = (*cell->suspend)(pdev);
+
+ return ret;
+}
+
+static int asic3_led_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->resume)
+ ret = (*cell->resume)(pdev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops asic3_led_pm_ops = {
+ .suspend = asic3_led_suspend,
+ .resume = asic3_led_resume,
+};
+
static struct platform_driver asic3_led_driver = {
.probe = asic3_led_probe,
.remove = __devexit_p(asic3_led_remove),
.driver = {
.name = "leds-asic3",
.owner = THIS_MODULE,
+ .pm = &asic3_led_pm_ops,
},
};
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 3d8bc32..504cc26 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -121,7 +121,7 @@
}
led_dat->cdev.brightness_set = gpio_led_set;
if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
- state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low;
+ state = !!gpio_get_value_cansleep(led_dat->gpio) ^ led_dat->active_low;
else
state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 3dd7090..4dc510f 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -421,7 +421,6 @@
err_reg_init:
regulator_put(drvdata->regulator);
err_regulator_get:
- i2c_set_clientdata(client, NULL);
kfree(drvdata);
err_out:
return err;
@@ -449,7 +448,7 @@
static struct i2c_driver lm3530_i2c_driver = {
.probe = lm3530_probe,
- .remove = lm3530_remove,
+ .remove = __devexit_p(lm3530_remove),
.id_table = lm3530_id,
.driver = {
.name = LM3530_NAME,
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 9fc122c..cb641f1 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -97,6 +97,9 @@
/* Status */
#define LP5521_EXT_CLK_USED 0x08
+/* default R channel current register value */
+#define LP5521_REG_R_CURR_DEFAULT 0xAF
+
struct lp5521_engine {
int id;
u8 mode;
@@ -175,14 +178,14 @@
mode = LP5521_CMD_DIRECT;
ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
+ if (ret < 0)
+ return ret;
/* set mode only for this engine */
engine_state &= ~(engine->engine_mask);
mode &= engine->engine_mask;
engine_state |= mode;
- ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
-
- return ret;
+ return lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
}
static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
@@ -643,6 +646,7 @@
struct lp5521_chip *chip;
struct lp5521_platform_data *pdata;
int ret, i, led;
+ u8 buf;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (!chip)
@@ -681,6 +685,20 @@
* Exact value is not available. 10 - 20ms
* appears to be enough for reset.
*/
+
+ /*
+ * Make sure that the chip is reset by reading back the r channel
+ * current reg. This is dummy read is required on some platforms -
+ * otherwise further access to the R G B channels in the
+ * LP5521_REG_ENABLE register will not have any effect - strange!
+ */
+ lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
+ if (buf != LP5521_REG_R_CURR_DEFAULT) {
+ dev_err(&client->dev, "error in reseting chip\n");
+ goto fail2;
+ }
+ usleep_range(10000, 20000);
+
ret = lp5521_detect(client);
if (ret) {
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index f369e56..b3393a9 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -21,13 +21,13 @@
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
-#include <linux/mfd/mc13783.h>
+#include <linux/mfd/mc13xxx.h>
#include <linux/slab.h>
struct mc13783_led {
struct led_classdev cdev;
struct work_struct work;
- struct mc13783 *master;
+ struct mc13xxx *master;
enum led_brightness new_brightness;
int id;
};
@@ -111,11 +111,11 @@
break;
}
- mc13783_lock(led->master);
+ mc13xxx_lock(led->master);
- mc13783_reg_rmw(led->master, reg, mask, value);
+ mc13xxx_reg_rmw(led->master, reg, mask, value);
- mc13783_unlock(led->master);
+ mc13xxx_unlock(led->master);
}
static void mc13783_led_set(struct led_classdev *led_cdev,
@@ -172,23 +172,23 @@
break;
}
- mc13783_lock(led->master);
+ mc13xxx_lock(led->master);
- ret = mc13783_reg_rmw(led->master, reg, mask << shift,
+ ret = mc13xxx_reg_rmw(led->master, reg, mask << shift,
value << shift);
- mc13783_unlock(led->master);
+ mc13xxx_unlock(led->master);
return ret;
}
static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
int ret = 0;
int reg = 0;
- mc13783_lock(dev);
+ mc13xxx_lock(dev);
if (pdata->flags & MC13783_LED_TC1HALF)
reg |= MC13783_LED_C1_TC1HALF_BIT;
@@ -196,7 +196,7 @@
if (pdata->flags & MC13783_LED_SLEWLIMTC)
reg |= MC13783_LED_Cx_SLEWLIM_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
if (ret)
goto out;
@@ -206,7 +206,7 @@
if (pdata->flags & MC13783_LED_SLEWLIMBL)
reg |= MC13783_LED_Cx_SLEWLIM_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
if (ret)
goto out;
@@ -216,7 +216,7 @@
if (pdata->flags & MC13783_LED_TRIODE_TC1)
reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
if (ret)
goto out;
@@ -226,7 +226,7 @@
if (pdata->flags & MC13783_LED_TRIODE_TC2)
reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
if (ret)
goto out;
@@ -236,7 +236,7 @@
if (pdata->flags & MC13783_LED_TRIODE_TC3)
reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
if (ret)
goto out;
@@ -255,17 +255,17 @@
reg |= (pdata->abref & MC13783_LED_C0_ABREF_MASK) <<
MC13783_LED_C0_ABREF;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
out:
- mc13783_unlock(dev);
+ mc13xxx_unlock(dev);
return ret;
}
static int __devinit mc13783_led_probe(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct mc13783_led_platform_data *led_cur;
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13xxx_led_platform_data *led_cur;
struct mc13783_led *led, *led_dat;
int ret, i;
int init_led = 0;
@@ -351,9 +351,9 @@
static int __devexit mc13783_led_remove(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13783_led *led = platform_get_drvdata(pdev);
- struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+ struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
int i;
for (i = 0; i < pdata->num_leds; i++) {
@@ -361,16 +361,16 @@
cancel_work_sync(&led[i].work);
}
- mc13783_lock(dev);
+ mc13xxx_lock(dev);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
- mc13783_unlock(dev);
+ mc13xxx_unlock(dev);
kfree(led);
return 0;
diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c
new file mode 100644
index 0000000..3ee540e
--- /dev/null
+++ b/drivers/leds/leds-renesas-tpu.c
@@ -0,0 +1,357 @@
+/*
+ * LED control using Renesas TPU
+ *
+ * Copyright (C) 2011 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/printk.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/workqueue.h>
+
+enum r_tpu_pin { R_TPU_PIN_UNUSED, R_TPU_PIN_GPIO, R_TPU_PIN_GPIO_FN };
+enum r_tpu_timer { R_TPU_TIMER_UNUSED, R_TPU_TIMER_ON };
+
+struct r_tpu_priv {
+ struct led_classdev ldev;
+ void __iomem *mapbase;
+ struct clk *clk;
+ struct platform_device *pdev;
+ enum r_tpu_pin pin_state;
+ enum r_tpu_timer timer_state;
+ unsigned long min_rate;
+ unsigned int refresh_rate;
+ struct work_struct work;
+ enum led_brightness new_brightness;
+};
+
+static DEFINE_SPINLOCK(r_tpu_lock);
+
+#define TSTR -1 /* Timer start register (shared register) */
+#define TCR 0 /* Timer control register (+0x00) */
+#define TMDR 1 /* Timer mode register (+0x04) */
+#define TIOR 2 /* Timer I/O control register (+0x08) */
+#define TIER 3 /* Timer interrupt enable register (+0x0c) */
+#define TSR 4 /* Timer status register (+0x10) */
+#define TCNT 5 /* Timer counter (+0x14) */
+#define TGRA 6 /* Timer general register A (+0x18) */
+#define TGRB 7 /* Timer general register B (+0x1c) */
+#define TGRC 8 /* Timer general register C (+0x20) */
+#define TGRD 9 /* Timer general register D (+0x24) */
+
+static inline unsigned short r_tpu_read(struct r_tpu_priv *p, int reg_nr)
+{
+ struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs = reg_nr << 2;
+
+ if (reg_nr == TSTR)
+ return ioread16(base - cfg->channel_offset);
+
+ return ioread16(base + offs);
+}
+
+static inline void r_tpu_write(struct r_tpu_priv *p, int reg_nr,
+ unsigned short value)
+{
+ struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs = reg_nr << 2;
+
+ if (reg_nr == TSTR) {
+ iowrite16(value, base - cfg->channel_offset);
+ return;
+ }
+
+ iowrite16(value, base + offs);
+}
+
+static void r_tpu_start_stop_ch(struct r_tpu_priv *p, int start)
+{
+ struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+ unsigned long flags, value;
+
+ /* start stop register shared by multiple timer channels */
+ spin_lock_irqsave(&r_tpu_lock, flags);
+ value = r_tpu_read(p, TSTR);
+
+ if (start)
+ value |= 1 << cfg->timer_bit;
+ else
+ value &= ~(1 << cfg->timer_bit);
+
+ r_tpu_write(p, TSTR, value);
+ spin_unlock_irqrestore(&r_tpu_lock, flags);
+}
+
+static int r_tpu_enable(struct r_tpu_priv *p, enum led_brightness brightness)
+{
+ struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+ int prescaler[] = { 1, 4, 16, 64 };
+ int k, ret;
+ unsigned long rate, tmp;
+
+ if (p->timer_state == R_TPU_TIMER_ON)
+ return 0;
+
+ /* wake up device and enable clock */
+ pm_runtime_get_sync(&p->pdev->dev);
+ ret = clk_enable(p->clk);
+ if (ret) {
+ dev_err(&p->pdev->dev, "cannot enable clock\n");
+ return ret;
+ }
+
+ /* make sure channel is disabled */
+ r_tpu_start_stop_ch(p, 0);
+
+ /* get clock rate after enabling it */
+ rate = clk_get_rate(p->clk);
+
+ /* pick the lowest acceptable rate */
+ for (k = 0; k < ARRAY_SIZE(prescaler); k++)
+ if ((rate / prescaler[k]) < p->min_rate)
+ break;
+
+ if (!k) {
+ dev_err(&p->pdev->dev, "clock rate mismatch\n");
+ goto err0;
+ }
+ dev_dbg(&p->pdev->dev, "rate = %lu, prescaler %u\n",
+ rate, prescaler[k - 1]);
+
+ /* clear TCNT on TGRB match, count on rising edge, set prescaler */
+ r_tpu_write(p, TCR, 0x0040 | (k - 1));
+
+ /* output 0 until TGRA, output 1 until TGRB */
+ r_tpu_write(p, TIOR, 0x0002);
+
+ rate /= prescaler[k - 1] * p->refresh_rate;
+ r_tpu_write(p, TGRB, rate);
+ dev_dbg(&p->pdev->dev, "TRGB = 0x%04lx\n", rate);
+
+ tmp = (cfg->max_brightness - brightness) * rate;
+ r_tpu_write(p, TGRA, tmp / cfg->max_brightness);
+ dev_dbg(&p->pdev->dev, "TRGA = 0x%04lx\n", tmp / cfg->max_brightness);
+
+ /* PWM mode */
+ r_tpu_write(p, TMDR, 0x0002);
+
+ /* enable channel */
+ r_tpu_start_stop_ch(p, 1);
+
+ p->timer_state = R_TPU_TIMER_ON;
+ return 0;
+ err0:
+ clk_disable(p->clk);
+ pm_runtime_put_sync(&p->pdev->dev);
+ return -ENOTSUPP;
+}
+
+static void r_tpu_disable(struct r_tpu_priv *p)
+{
+ if (p->timer_state == R_TPU_TIMER_UNUSED)
+ return;
+
+ /* disable channel */
+ r_tpu_start_stop_ch(p, 0);
+
+ /* stop clock and mark device as idle */
+ clk_disable(p->clk);
+ pm_runtime_put_sync(&p->pdev->dev);
+
+ p->timer_state = R_TPU_TIMER_UNUSED;
+}
+
+static void r_tpu_set_pin(struct r_tpu_priv *p, enum r_tpu_pin new_state,
+ enum led_brightness brightness)
+{
+ struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
+
+ if (p->pin_state == new_state) {
+ if (p->pin_state == R_TPU_PIN_GPIO)
+ gpio_set_value(cfg->pin_gpio, brightness);
+ return;
+ }
+
+ if (p->pin_state == R_TPU_PIN_GPIO)
+ gpio_free(cfg->pin_gpio);
+
+ if (p->pin_state == R_TPU_PIN_GPIO_FN)
+ gpio_free(cfg->pin_gpio_fn);
+
+ if (new_state == R_TPU_PIN_GPIO) {
+ gpio_request(cfg->pin_gpio, cfg->name);
+ gpio_direction_output(cfg->pin_gpio, !!brightness);
+ }
+ if (new_state == R_TPU_PIN_GPIO_FN)
+ gpio_request(cfg->pin_gpio_fn, cfg->name);
+
+ p->pin_state = new_state;
+}
+
+static void r_tpu_work(struct work_struct *work)
+{
+ struct r_tpu_priv *p = container_of(work, struct r_tpu_priv, work);
+ enum led_brightness brightness = p->new_brightness;
+
+ r_tpu_disable(p);
+
+ /* off and maximum are handled as GPIO pins, in between PWM */
+ if ((brightness == 0) || (brightness == p->ldev.max_brightness))
+ r_tpu_set_pin(p, R_TPU_PIN_GPIO, brightness);
+ else {
+ r_tpu_set_pin(p, R_TPU_PIN_GPIO_FN, 0);
+ r_tpu_enable(p, brightness);
+ }
+}
+
+static void r_tpu_set_brightness(struct led_classdev *ldev,
+ enum led_brightness brightness)
+{
+ struct r_tpu_priv *p = container_of(ldev, struct r_tpu_priv, ldev);
+ p->new_brightness = brightness;
+ schedule_work(&p->work);
+}
+
+static int __devinit r_tpu_probe(struct platform_device *pdev)
+{
+ struct led_renesas_tpu_config *cfg = pdev->dev.platform_data;
+ struct r_tpu_priv *p;
+ struct resource *res;
+ int ret = -ENXIO;
+
+ if (!cfg) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ goto err0;
+ }
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ goto err1;
+ }
+
+ /* map memory, let mapbase point to our channel */
+ p->mapbase = ioremap_nocache(res->start, resource_size(res));
+ if (p->mapbase == NULL) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ goto err1;
+ }
+
+ /* get hold of clock */
+ p->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(p->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ ret = PTR_ERR(p->clk);
+ goto err2;
+ }
+
+ p->pdev = pdev;
+ p->pin_state = R_TPU_PIN_UNUSED;
+ p->timer_state = R_TPU_TIMER_UNUSED;
+ p->refresh_rate = cfg->refresh_rate ? cfg->refresh_rate : 100;
+ r_tpu_set_pin(p, R_TPU_PIN_GPIO, LED_OFF);
+ platform_set_drvdata(pdev, p);
+
+ INIT_WORK(&p->work, r_tpu_work);
+
+ p->ldev.name = cfg->name;
+ p->ldev.brightness = LED_OFF;
+ p->ldev.max_brightness = cfg->max_brightness;
+ p->ldev.brightness_set = r_tpu_set_brightness;
+ p->ldev.flags |= LED_CORE_SUSPENDRESUME;
+ ret = led_classdev_register(&pdev->dev, &p->ldev);
+ if (ret < 0)
+ goto err3;
+
+ /* max_brightness may be updated by the LED core code */
+ p->min_rate = p->ldev.max_brightness * p->refresh_rate;
+
+ pm_runtime_enable(&pdev->dev);
+ return 0;
+
+ err3:
+ r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF);
+ clk_put(p->clk);
+ err2:
+ iounmap(p->mapbase);
+ err1:
+ kfree(p);
+ err0:
+ return ret;
+}
+
+static int __devexit r_tpu_remove(struct platform_device *pdev)
+{
+ struct r_tpu_priv *p = platform_get_drvdata(pdev);
+
+ r_tpu_set_brightness(&p->ldev, LED_OFF);
+ led_classdev_unregister(&p->ldev);
+ cancel_work_sync(&p->work);
+ r_tpu_disable(p);
+ r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF);
+
+ pm_runtime_disable(&pdev->dev);
+ clk_put(p->clk);
+
+ iounmap(p->mapbase);
+ kfree(p);
+ return 0;
+}
+
+static struct platform_driver r_tpu_device_driver = {
+ .probe = r_tpu_probe,
+ .remove = __devexit_p(r_tpu_remove),
+ .driver = {
+ .name = "leds-renesas-tpu",
+ }
+};
+
+static int __init r_tpu_init(void)
+{
+ return platform_driver_register(&r_tpu_device_driver);
+}
+
+static void __exit r_tpu_exit(void)
+{
+ platform_driver_unregister(&r_tpu_device_driver);
+}
+
+module_init(r_tpu_init);
+module_exit(r_tpu_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas TPU LED Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 2535933..b5fdcb7 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -232,6 +232,13 @@
}
}
+ /*
+ * All long-lived kernel loops need to check with this horrible
+ * thing called the freezer. If the Host is trying to suspend,
+ * it stops us.
+ */
+ try_to_freeze();
+
/* Check for signals */
if (signal_pending(current))
return -ERESTARTSYS;
@@ -246,13 +253,6 @@
try_deliver_interrupt(cpu, irq, more);
/*
- * All long-lived kernel loops need to check with this horrible
- * thing called the freezer. If the Host is trying to suspend,
- * it stops us.
- */
- try_to_freeze();
-
- /*
* Just make absolutely sure the Guest is still alive. One of
* those hypercalls could have been fatal, for example.
*/
@@ -313,7 +313,7 @@
int err;
/* Lguest can't run under Xen, VMI or itself. It does Tricky Stuff. */
- if (paravirt_enabled()) {
+ if (get_kernel_rpl() != 0) {
printk("lguest is afraid of being a guest\n");
return -EPERM;
}
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index f75a66e..faa4741 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -208,6 +208,16 @@
If unsure, say N.
+config DM_BUFIO
+ tristate
+ depends on BLK_DEV_DM && EXPERIMENTAL
+ ---help---
+ This interface allows you to do buffered I/O on a device and acts
+ as a cache, holding recently-read blocks in memory and performing
+ delayed writes.
+
+source "drivers/md/persistent-data/Kconfig"
+
config DM_CRYPT
tristate "Crypt target support"
depends on BLK_DEV_DM
@@ -233,6 +243,32 @@
---help---
Allow volume managers to take writable snapshots of a device.
+config DM_THIN_PROVISIONING
+ tristate "Thin provisioning target (EXPERIMENTAL)"
+ depends on BLK_DEV_DM && EXPERIMENTAL
+ select DM_PERSISTENT_DATA
+ ---help---
+ Provides thin provisioning and snapshots that share a data store.
+
+config DM_DEBUG_BLOCK_STACK_TRACING
+ boolean "Keep stack trace of thin provisioning block lock holders"
+ depends on STACKTRACE_SUPPORT && DM_THIN_PROVISIONING
+ select STACKTRACE
+ ---help---
+ Enable this for messages that may help debug problems with the
+ block manager locking used by thin provisioning.
+
+ If unsure, say N.
+
+config DM_DEBUG_SPACE_MAPS
+ boolean "Extra validation for thin provisioning space maps"
+ depends on DM_THIN_PROVISIONING
+ ---help---
+ Enable this for messages that may help debug problems with the
+ space maps used by thin provisioning.
+
+ If unsure, say N.
+
config DM_MIRROR
tristate "Mirror target"
depends on BLK_DEV_DM
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 448838b..046860c 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -10,6 +10,7 @@
dm-mirror-y += dm-raid1.o
dm-log-userspace-y \
+= dm-log-userspace-base.o dm-log-userspace-transfer.o
+dm-thin-pool-y += dm-thin.o dm-thin-metadata.o
md-mod-y += md.o bitmap.o
raid456-y += raid5.o
@@ -27,6 +28,7 @@
obj-$(CONFIG_MD_FAULTY) += faulty.o
obj-$(CONFIG_BLK_DEV_MD) += md-mod.o
obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
+obj-$(CONFIG_DM_BUFIO) += dm-bufio.o
obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
obj-$(CONFIG_DM_DELAY) += dm-delay.o
obj-$(CONFIG_DM_FLAKEY) += dm-flakey.o
@@ -34,10 +36,12 @@
obj-$(CONFIG_DM_MULTIPATH_QL) += dm-queue-length.o
obj-$(CONFIG_DM_MULTIPATH_ST) += dm-service-time.o
obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
+obj-$(CONFIG_DM_PERSISTENT_DATA) += persistent-data/
obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o
obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
obj-$(CONFIG_DM_ZERO) += dm-zero.o
obj-$(CONFIG_DM_RAID) += dm-raid.o
+obj-$(CONFIG_DM_THIN_PROVISIONING) += dm-thin-pool.o
ifeq ($(CONFIG_DM_UEVENT),y)
dm-mod-objs += dm-uevent.o
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
new file mode 100644
index 0000000..cb24666
--- /dev/null
+++ b/drivers/md/dm-bufio.c
@@ -0,0 +1,1699 @@
+/*
+ * Copyright (C) 2009-2011 Red Hat, Inc.
+ *
+ * Author: Mikulas Patocka <mpatocka@redhat.com>
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-bufio.h"
+
+#include <linux/device-mapper.h>
+#include <linux/dm-io.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/version.h>
+#include <linux/shrinker.h>
+
+#define DM_MSG_PREFIX "bufio"
+
+/*
+ * Memory management policy:
+ * Limit the number of buffers to DM_BUFIO_MEMORY_PERCENT of main memory
+ * or DM_BUFIO_VMALLOC_PERCENT of vmalloc memory (whichever is lower).
+ * Always allocate at least DM_BUFIO_MIN_BUFFERS buffers.
+ * Start background writeback when there are DM_BUFIO_WRITEBACK_PERCENT
+ * dirty buffers.
+ */
+#define DM_BUFIO_MIN_BUFFERS 8
+
+#define DM_BUFIO_MEMORY_PERCENT 2
+#define DM_BUFIO_VMALLOC_PERCENT 25
+#define DM_BUFIO_WRITEBACK_PERCENT 75
+
+/*
+ * Check buffer ages in this interval (seconds)
+ */
+#define DM_BUFIO_WORK_TIMER_SECS 10
+
+/*
+ * Free buffers when they are older than this (seconds)
+ */
+#define DM_BUFIO_DEFAULT_AGE_SECS 60
+
+/*
+ * The number of bvec entries that are embedded directly in the buffer.
+ * If the chunk size is larger, dm-io is used to do the io.
+ */
+#define DM_BUFIO_INLINE_VECS 16
+
+/*
+ * Buffer hash
+ */
+#define DM_BUFIO_HASH_BITS 20
+#define DM_BUFIO_HASH(block) \
+ ((((block) >> DM_BUFIO_HASH_BITS) ^ (block)) & \
+ ((1 << DM_BUFIO_HASH_BITS) - 1))
+
+/*
+ * Don't try to use kmem_cache_alloc for blocks larger than this.
+ * For explanation, see alloc_buffer_data below.
+ */
+#define DM_BUFIO_BLOCK_SIZE_SLAB_LIMIT (PAGE_SIZE >> 1)
+#define DM_BUFIO_BLOCK_SIZE_GFP_LIMIT (PAGE_SIZE << (MAX_ORDER - 1))
+
+/*
+ * dm_buffer->list_mode
+ */
+#define LIST_CLEAN 0
+#define LIST_DIRTY 1
+#define LIST_SIZE 2
+
+/*
+ * Linking of buffers:
+ * All buffers are linked to cache_hash with their hash_list field.
+ *
+ * Clean buffers that are not being written (B_WRITING not set)
+ * are linked to lru[LIST_CLEAN] with their lru_list field.
+ *
+ * Dirty and clean buffers that are being written are linked to
+ * lru[LIST_DIRTY] with their lru_list field. When the write
+ * finishes, the buffer cannot be relinked immediately (because we
+ * are in an interrupt context and relinking requires process
+ * context), so some clean-not-writing buffers can be held on
+ * dirty_lru too. They are later added to lru in the process
+ * context.
+ */
+struct dm_bufio_client {
+ struct mutex lock;
+
+ struct list_head lru[LIST_SIZE];
+ unsigned long n_buffers[LIST_SIZE];
+
+ struct block_device *bdev;
+ unsigned block_size;
+ unsigned char sectors_per_block_bits;
+ unsigned char pages_per_block_bits;
+ unsigned char blocks_per_page_bits;
+ unsigned aux_size;
+ void (*alloc_callback)(struct dm_buffer *);
+ void (*write_callback)(struct dm_buffer *);
+
+ struct dm_io_client *dm_io;
+
+ struct list_head reserved_buffers;
+ unsigned need_reserved_buffers;
+
+ struct hlist_head *cache_hash;
+ wait_queue_head_t free_buffer_wait;
+
+ int async_write_error;
+
+ struct list_head client_list;
+ struct shrinker shrinker;
+};
+
+/*
+ * Buffer state bits.
+ */
+#define B_READING 0
+#define B_WRITING 1
+#define B_DIRTY 2
+
+/*
+ * Describes how the block was allocated:
+ * kmem_cache_alloc(), __get_free_pages() or vmalloc().
+ * See the comment at alloc_buffer_data.
+ */
+enum data_mode {
+ DATA_MODE_SLAB = 0,
+ DATA_MODE_GET_FREE_PAGES = 1,
+ DATA_MODE_VMALLOC = 2,
+ DATA_MODE_LIMIT = 3
+};
+
+struct dm_buffer {
+ struct hlist_node hash_list;
+ struct list_head lru_list;
+ sector_t block;
+ void *data;
+ enum data_mode data_mode;
+ unsigned char list_mode; /* LIST_* */
+ unsigned hold_count;
+ int read_error;
+ int write_error;
+ unsigned long state;
+ unsigned long last_accessed;
+ struct dm_bufio_client *c;
+ struct bio bio;
+ struct bio_vec bio_vec[DM_BUFIO_INLINE_VECS];
+};
+
+/*----------------------------------------------------------------*/
+
+static struct kmem_cache *dm_bufio_caches[PAGE_SHIFT - SECTOR_SHIFT];
+static char *dm_bufio_cache_names[PAGE_SHIFT - SECTOR_SHIFT];
+
+static inline int dm_bufio_cache_index(struct dm_bufio_client *c)
+{
+ unsigned ret = c->blocks_per_page_bits - 1;
+
+ BUG_ON(ret >= ARRAY_SIZE(dm_bufio_caches));
+
+ return ret;
+}
+
+#define DM_BUFIO_CACHE(c) (dm_bufio_caches[dm_bufio_cache_index(c)])
+#define DM_BUFIO_CACHE_NAME(c) (dm_bufio_cache_names[dm_bufio_cache_index(c)])
+
+#define dm_bufio_in_request() (!!current->bio_list)
+
+static void dm_bufio_lock(struct dm_bufio_client *c)
+{
+ mutex_lock_nested(&c->lock, dm_bufio_in_request());
+}
+
+static int dm_bufio_trylock(struct dm_bufio_client *c)
+{
+ return mutex_trylock(&c->lock);
+}
+
+static void dm_bufio_unlock(struct dm_bufio_client *c)
+{
+ mutex_unlock(&c->lock);
+}
+
+/*
+ * FIXME Move to sched.h?
+ */
+#ifdef CONFIG_PREEMPT_VOLUNTARY
+# define dm_bufio_cond_resched() \
+do { \
+ if (unlikely(need_resched())) \
+ _cond_resched(); \
+} while (0)
+#else
+# define dm_bufio_cond_resched() do { } while (0)
+#endif
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Default cache size: available memory divided by the ratio.
+ */
+static unsigned long dm_bufio_default_cache_size;
+
+/*
+ * Total cache size set by the user.
+ */
+static unsigned long dm_bufio_cache_size;
+
+/*
+ * A copy of dm_bufio_cache_size because dm_bufio_cache_size can change
+ * at any time. If it disagrees, the user has changed cache size.
+ */
+static unsigned long dm_bufio_cache_size_latch;
+
+static DEFINE_SPINLOCK(param_spinlock);
+
+/*
+ * Buffers are freed after this timeout
+ */
+static unsigned dm_bufio_max_age = DM_BUFIO_DEFAULT_AGE_SECS;
+
+static unsigned long dm_bufio_peak_allocated;
+static unsigned long dm_bufio_allocated_kmem_cache;
+static unsigned long dm_bufio_allocated_get_free_pages;
+static unsigned long dm_bufio_allocated_vmalloc;
+static unsigned long dm_bufio_current_allocated;
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Per-client cache: dm_bufio_cache_size / dm_bufio_client_count
+ */
+static unsigned long dm_bufio_cache_size_per_client;
+
+/*
+ * The current number of clients.
+ */
+static int dm_bufio_client_count;
+
+/*
+ * The list of all clients.
+ */
+static LIST_HEAD(dm_bufio_all_clients);
+
+/*
+ * This mutex protects dm_bufio_cache_size_latch,
+ * dm_bufio_cache_size_per_client and dm_bufio_client_count
+ */
+static DEFINE_MUTEX(dm_bufio_clients_lock);
+
+/*----------------------------------------------------------------*/
+
+static void adjust_total_allocated(enum data_mode data_mode, long diff)
+{
+ static unsigned long * const class_ptr[DATA_MODE_LIMIT] = {
+ &dm_bufio_allocated_kmem_cache,
+ &dm_bufio_allocated_get_free_pages,
+ &dm_bufio_allocated_vmalloc,
+ };
+
+ spin_lock(¶m_spinlock);
+
+ *class_ptr[data_mode] += diff;
+
+ dm_bufio_current_allocated += diff;
+
+ if (dm_bufio_current_allocated > dm_bufio_peak_allocated)
+ dm_bufio_peak_allocated = dm_bufio_current_allocated;
+
+ spin_unlock(¶m_spinlock);
+}
+
+/*
+ * Change the number of clients and recalculate per-client limit.
+ */
+static void __cache_size_refresh(void)
+{
+ BUG_ON(!mutex_is_locked(&dm_bufio_clients_lock));
+ BUG_ON(dm_bufio_client_count < 0);
+
+ dm_bufio_cache_size_latch = dm_bufio_cache_size;
+
+ barrier();
+
+ /*
+ * Use default if set to 0 and report the actual cache size used.
+ */
+ if (!dm_bufio_cache_size_latch) {
+ (void)cmpxchg(&dm_bufio_cache_size, 0,
+ dm_bufio_default_cache_size);
+ dm_bufio_cache_size_latch = dm_bufio_default_cache_size;
+ }
+
+ dm_bufio_cache_size_per_client = dm_bufio_cache_size_latch /
+ (dm_bufio_client_count ? : 1);
+}
+
+/*
+ * Allocating buffer data.
+ *
+ * Small buffers are allocated with kmem_cache, to use space optimally.
+ *
+ * For large buffers, we choose between get_free_pages and vmalloc.
+ * Each has advantages and disadvantages.
+ *
+ * __get_free_pages can randomly fail if the memory is fragmented.
+ * __vmalloc won't randomly fail, but vmalloc space is limited (it may be
+ * as low as 128M) so using it for caching is not appropriate.
+ *
+ * If the allocation may fail we use __get_free_pages. Memory fragmentation
+ * won't have a fatal effect here, but it just causes flushes of some other
+ * buffers and more I/O will be performed. Don't use __get_free_pages if it
+ * always fails (i.e. order >= MAX_ORDER).
+ *
+ * If the allocation shouldn't fail we use __vmalloc. This is only for the
+ * initial reserve allocation, so there's no risk of wasting all vmalloc
+ * space.
+ */
+static void *alloc_buffer_data(struct dm_bufio_client *c, gfp_t gfp_mask,
+ enum data_mode *data_mode)
+{
+ if (c->block_size <= DM_BUFIO_BLOCK_SIZE_SLAB_LIMIT) {
+ *data_mode = DATA_MODE_SLAB;
+ return kmem_cache_alloc(DM_BUFIO_CACHE(c), gfp_mask);
+ }
+
+ if (c->block_size <= DM_BUFIO_BLOCK_SIZE_GFP_LIMIT &&
+ gfp_mask & __GFP_NORETRY) {
+ *data_mode = DATA_MODE_GET_FREE_PAGES;
+ return (void *)__get_free_pages(gfp_mask,
+ c->pages_per_block_bits);
+ }
+
+ *data_mode = DATA_MODE_VMALLOC;
+ return __vmalloc(c->block_size, gfp_mask, PAGE_KERNEL);
+}
+
+/*
+ * Free buffer's data.
+ */
+static void free_buffer_data(struct dm_bufio_client *c,
+ void *data, enum data_mode data_mode)
+{
+ switch (data_mode) {
+ case DATA_MODE_SLAB:
+ kmem_cache_free(DM_BUFIO_CACHE(c), data);
+ break;
+
+ case DATA_MODE_GET_FREE_PAGES:
+ free_pages((unsigned long)data, c->pages_per_block_bits);
+ break;
+
+ case DATA_MODE_VMALLOC:
+ vfree(data);
+ break;
+
+ default:
+ DMCRIT("dm_bufio_free_buffer_data: bad data mode: %d",
+ data_mode);
+ BUG();
+ }
+}
+
+/*
+ * Allocate buffer and its data.
+ */
+static struct dm_buffer *alloc_buffer(struct dm_bufio_client *c, gfp_t gfp_mask)
+{
+ struct dm_buffer *b = kmalloc(sizeof(struct dm_buffer) + c->aux_size,
+ gfp_mask);
+
+ if (!b)
+ return NULL;
+
+ b->c = c;
+
+ b->data = alloc_buffer_data(c, gfp_mask, &b->data_mode);
+ if (!b->data) {
+ kfree(b);
+ return NULL;
+ }
+
+ adjust_total_allocated(b->data_mode, (long)c->block_size);
+
+ return b;
+}
+
+/*
+ * Free buffer and its data.
+ */
+static void free_buffer(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ adjust_total_allocated(b->data_mode, -(long)c->block_size);
+
+ free_buffer_data(c, b->data, b->data_mode);
+ kfree(b);
+}
+
+/*
+ * Link buffer to the hash list and clean or dirty queue.
+ */
+static void __link_buffer(struct dm_buffer *b, sector_t block, int dirty)
+{
+ struct dm_bufio_client *c = b->c;
+
+ c->n_buffers[dirty]++;
+ b->block = block;
+ b->list_mode = dirty;
+ list_add(&b->lru_list, &c->lru[dirty]);
+ hlist_add_head(&b->hash_list, &c->cache_hash[DM_BUFIO_HASH(block)]);
+ b->last_accessed = jiffies;
+}
+
+/*
+ * Unlink buffer from the hash list and dirty or clean queue.
+ */
+static void __unlink_buffer(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ BUG_ON(!c->n_buffers[b->list_mode]);
+
+ c->n_buffers[b->list_mode]--;
+ hlist_del(&b->hash_list);
+ list_del(&b->lru_list);
+}
+
+/*
+ * Place the buffer to the head of dirty or clean LRU queue.
+ */
+static void __relink_lru(struct dm_buffer *b, int dirty)
+{
+ struct dm_bufio_client *c = b->c;
+
+ BUG_ON(!c->n_buffers[b->list_mode]);
+
+ c->n_buffers[b->list_mode]--;
+ c->n_buffers[dirty]++;
+ b->list_mode = dirty;
+ list_del(&b->lru_list);
+ list_add(&b->lru_list, &c->lru[dirty]);
+}
+
+/*----------------------------------------------------------------
+ * Submit I/O on the buffer.
+ *
+ * Bio interface is faster but it has some problems:
+ * the vector list is limited (increasing this limit increases
+ * memory-consumption per buffer, so it is not viable);
+ *
+ * the memory must be direct-mapped, not vmalloced;
+ *
+ * the I/O driver can reject requests spuriously if it thinks that
+ * the requests are too big for the device or if they cross a
+ * controller-defined memory boundary.
+ *
+ * If the buffer is small enough (up to DM_BUFIO_INLINE_VECS pages) and
+ * it is not vmalloced, try using the bio interface.
+ *
+ * If the buffer is big, if it is vmalloced or if the underlying device
+ * rejects the bio because it is too large, use dm-io layer to do the I/O.
+ * The dm-io layer splits the I/O into multiple requests, avoiding the above
+ * shortcomings.
+ *--------------------------------------------------------------*/
+
+/*
+ * dm-io completion routine. It just calls b->bio.bi_end_io, pretending
+ * that the request was handled directly with bio interface.
+ */
+static void dmio_complete(unsigned long error, void *context)
+{
+ struct dm_buffer *b = context;
+
+ b->bio.bi_end_io(&b->bio, error ? -EIO : 0);
+}
+
+static void use_dmio(struct dm_buffer *b, int rw, sector_t block,
+ bio_end_io_t *end_io)
+{
+ int r;
+ struct dm_io_request io_req = {
+ .bi_rw = rw,
+ .notify.fn = dmio_complete,
+ .notify.context = b,
+ .client = b->c->dm_io,
+ };
+ struct dm_io_region region = {
+ .bdev = b->c->bdev,
+ .sector = block << b->c->sectors_per_block_bits,
+ .count = b->c->block_size >> SECTOR_SHIFT,
+ };
+
+ if (b->data_mode != DATA_MODE_VMALLOC) {
+ io_req.mem.type = DM_IO_KMEM;
+ io_req.mem.ptr.addr = b->data;
+ } else {
+ io_req.mem.type = DM_IO_VMA;
+ io_req.mem.ptr.vma = b->data;
+ }
+
+ b->bio.bi_end_io = end_io;
+
+ r = dm_io(&io_req, 1, ®ion, NULL);
+ if (r)
+ end_io(&b->bio, r);
+}
+
+static void use_inline_bio(struct dm_buffer *b, int rw, sector_t block,
+ bio_end_io_t *end_io)
+{
+ char *ptr;
+ int len;
+
+ bio_init(&b->bio);
+ b->bio.bi_io_vec = b->bio_vec;
+ b->bio.bi_max_vecs = DM_BUFIO_INLINE_VECS;
+ b->bio.bi_sector = block << b->c->sectors_per_block_bits;
+ b->bio.bi_bdev = b->c->bdev;
+ b->bio.bi_end_io = end_io;
+
+ /*
+ * We assume that if len >= PAGE_SIZE ptr is page-aligned.
+ * If len < PAGE_SIZE the buffer doesn't cross page boundary.
+ */
+ ptr = b->data;
+ len = b->c->block_size;
+
+ if (len >= PAGE_SIZE)
+ BUG_ON((unsigned long)ptr & (PAGE_SIZE - 1));
+ else
+ BUG_ON((unsigned long)ptr & (len - 1));
+
+ do {
+ if (!bio_add_page(&b->bio, virt_to_page(ptr),
+ len < PAGE_SIZE ? len : PAGE_SIZE,
+ virt_to_phys(ptr) & (PAGE_SIZE - 1))) {
+ BUG_ON(b->c->block_size <= PAGE_SIZE);
+ use_dmio(b, rw, block, end_io);
+ return;
+ }
+
+ len -= PAGE_SIZE;
+ ptr += PAGE_SIZE;
+ } while (len > 0);
+
+ submit_bio(rw, &b->bio);
+}
+
+static void submit_io(struct dm_buffer *b, int rw, sector_t block,
+ bio_end_io_t *end_io)
+{
+ if (rw == WRITE && b->c->write_callback)
+ b->c->write_callback(b);
+
+ if (b->c->block_size <= DM_BUFIO_INLINE_VECS * PAGE_SIZE &&
+ b->data_mode != DATA_MODE_VMALLOC)
+ use_inline_bio(b, rw, block, end_io);
+ else
+ use_dmio(b, rw, block, end_io);
+}
+
+/*----------------------------------------------------------------
+ * Writing dirty buffers
+ *--------------------------------------------------------------*/
+
+/*
+ * The endio routine for write.
+ *
+ * Set the error, clear B_WRITING bit and wake anyone who was waiting on
+ * it.
+ */
+static void write_endio(struct bio *bio, int error)
+{
+ struct dm_buffer *b = container_of(bio, struct dm_buffer, bio);
+
+ b->write_error = error;
+ if (error) {
+ struct dm_bufio_client *c = b->c;
+ (void)cmpxchg(&c->async_write_error, 0, error);
+ }
+
+ BUG_ON(!test_bit(B_WRITING, &b->state));
+
+ smp_mb__before_clear_bit();
+ clear_bit(B_WRITING, &b->state);
+ smp_mb__after_clear_bit();
+
+ wake_up_bit(&b->state, B_WRITING);
+}
+
+/*
+ * This function is called when wait_on_bit is actually waiting.
+ */
+static int do_io_schedule(void *word)
+{
+ io_schedule();
+
+ return 0;
+}
+
+/*
+ * Initiate a write on a dirty buffer, but don't wait for it.
+ *
+ * - If the buffer is not dirty, exit.
+ * - If there some previous write going on, wait for it to finish (we can't
+ * have two writes on the same buffer simultaneously).
+ * - Submit our write and don't wait on it. We set B_WRITING indicating
+ * that there is a write in progress.
+ */
+static void __write_dirty_buffer(struct dm_buffer *b)
+{
+ if (!test_bit(B_DIRTY, &b->state))
+ return;
+
+ clear_bit(B_DIRTY, &b->state);
+ wait_on_bit_lock(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+
+ submit_io(b, WRITE, b->block, write_endio);
+}
+
+/*
+ * Wait until any activity on the buffer finishes. Possibly write the
+ * buffer if it is dirty. When this function finishes, there is no I/O
+ * running on the buffer and the buffer is not dirty.
+ */
+static void __make_buffer_clean(struct dm_buffer *b)
+{
+ BUG_ON(b->hold_count);
+
+ if (!b->state) /* fast case */
+ return;
+
+ wait_on_bit(&b->state, B_READING, do_io_schedule, TASK_UNINTERRUPTIBLE);
+ __write_dirty_buffer(b);
+ wait_on_bit(&b->state, B_WRITING, do_io_schedule, TASK_UNINTERRUPTIBLE);
+}
+
+/*
+ * Find some buffer that is not held by anybody, clean it, unlink it and
+ * return it.
+ */
+static struct dm_buffer *__get_unclaimed_buffer(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b;
+
+ list_for_each_entry_reverse(b, &c->lru[LIST_CLEAN], lru_list) {
+ BUG_ON(test_bit(B_WRITING, &b->state));
+ BUG_ON(test_bit(B_DIRTY, &b->state));
+
+ if (!b->hold_count) {
+ __make_buffer_clean(b);
+ __unlink_buffer(b);
+ return b;
+ }
+ dm_bufio_cond_resched();
+ }
+
+ list_for_each_entry_reverse(b, &c->lru[LIST_DIRTY], lru_list) {
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ if (!b->hold_count) {
+ __make_buffer_clean(b);
+ __unlink_buffer(b);
+ return b;
+ }
+ dm_bufio_cond_resched();
+ }
+
+ return NULL;
+}
+
+/*
+ * Wait until some other threads free some buffer or release hold count on
+ * some buffer.
+ *
+ * This function is entered with c->lock held, drops it and regains it
+ * before exiting.
+ */
+static void __wait_for_free_buffer(struct dm_bufio_client *c)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(&c->free_buffer_wait, &wait);
+ set_task_state(current, TASK_UNINTERRUPTIBLE);
+ dm_bufio_unlock(c);
+
+ io_schedule();
+
+ set_task_state(current, TASK_RUNNING);
+ remove_wait_queue(&c->free_buffer_wait, &wait);
+
+ dm_bufio_lock(c);
+}
+
+/*
+ * Allocate a new buffer. If the allocation is not possible, wait until
+ * some other thread frees a buffer.
+ *
+ * May drop the lock and regain it.
+ */
+static struct dm_buffer *__alloc_buffer_wait_no_callback(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b;
+
+ /*
+ * dm-bufio is resistant to allocation failures (it just keeps
+ * one buffer reserved in cases all the allocations fail).
+ * So set flags to not try too hard:
+ * GFP_NOIO: don't recurse into the I/O layer
+ * __GFP_NORETRY: don't retry and rather return failure
+ * __GFP_NOMEMALLOC: don't use emergency reserves
+ * __GFP_NOWARN: don't print a warning in case of failure
+ *
+ * For debugging, if we set the cache size to 1, no new buffers will
+ * be allocated.
+ */
+ while (1) {
+ if (dm_bufio_cache_size_latch != 1) {
+ b = alloc_buffer(c, GFP_NOIO | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN);
+ if (b)
+ return b;
+ }
+
+ if (!list_empty(&c->reserved_buffers)) {
+ b = list_entry(c->reserved_buffers.next,
+ struct dm_buffer, lru_list);
+ list_del(&b->lru_list);
+ c->need_reserved_buffers++;
+
+ return b;
+ }
+
+ b = __get_unclaimed_buffer(c);
+ if (b)
+ return b;
+
+ __wait_for_free_buffer(c);
+ }
+}
+
+static struct dm_buffer *__alloc_buffer_wait(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b = __alloc_buffer_wait_no_callback(c);
+
+ if (c->alloc_callback)
+ c->alloc_callback(b);
+
+ return b;
+}
+
+/*
+ * Free a buffer and wake other threads waiting for free buffers.
+ */
+static void __free_buffer_wake(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ if (!c->need_reserved_buffers)
+ free_buffer(b);
+ else {
+ list_add(&b->lru_list, &c->reserved_buffers);
+ c->need_reserved_buffers--;
+ }
+
+ wake_up(&c->free_buffer_wait);
+}
+
+static void __write_dirty_buffers_async(struct dm_bufio_client *c, int no_wait)
+{
+ struct dm_buffer *b, *tmp;
+
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[LIST_DIRTY], lru_list) {
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ if (!test_bit(B_DIRTY, &b->state) &&
+ !test_bit(B_WRITING, &b->state)) {
+ __relink_lru(b, LIST_CLEAN);
+ continue;
+ }
+
+ if (no_wait && test_bit(B_WRITING, &b->state))
+ return;
+
+ __write_dirty_buffer(b);
+ dm_bufio_cond_resched();
+ }
+}
+
+/*
+ * Get writeback threshold and buffer limit for a given client.
+ */
+static void __get_memory_limit(struct dm_bufio_client *c,
+ unsigned long *threshold_buffers,
+ unsigned long *limit_buffers)
+{
+ unsigned long buffers;
+
+ if (dm_bufio_cache_size != dm_bufio_cache_size_latch) {
+ mutex_lock(&dm_bufio_clients_lock);
+ __cache_size_refresh();
+ mutex_unlock(&dm_bufio_clients_lock);
+ }
+
+ buffers = dm_bufio_cache_size_per_client >>
+ (c->sectors_per_block_bits + SECTOR_SHIFT);
+
+ if (buffers < DM_BUFIO_MIN_BUFFERS)
+ buffers = DM_BUFIO_MIN_BUFFERS;
+
+ *limit_buffers = buffers;
+ *threshold_buffers = buffers * DM_BUFIO_WRITEBACK_PERCENT / 100;
+}
+
+/*
+ * Check if we're over watermark.
+ * If we are over threshold_buffers, start freeing buffers.
+ * If we're over "limit_buffers", block until we get under the limit.
+ */
+static void __check_watermark(struct dm_bufio_client *c)
+{
+ unsigned long threshold_buffers, limit_buffers;
+
+ __get_memory_limit(c, &threshold_buffers, &limit_buffers);
+
+ while (c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY] >
+ limit_buffers) {
+
+ struct dm_buffer *b = __get_unclaimed_buffer(c);
+
+ if (!b)
+ return;
+
+ __free_buffer_wake(b);
+ dm_bufio_cond_resched();
+ }
+
+ if (c->n_buffers[LIST_DIRTY] > threshold_buffers)
+ __write_dirty_buffers_async(c, 1);
+}
+
+/*
+ * Find a buffer in the hash.
+ */
+static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block)
+{
+ struct dm_buffer *b;
+ struct hlist_node *hn;
+
+ hlist_for_each_entry(b, hn, &c->cache_hash[DM_BUFIO_HASH(block)],
+ hash_list) {
+ dm_bufio_cond_resched();
+ if (b->block == block)
+ return b;
+ }
+
+ return NULL;
+}
+
+/*----------------------------------------------------------------
+ * Getting a buffer
+ *--------------------------------------------------------------*/
+
+enum new_flag {
+ NF_FRESH = 0,
+ NF_READ = 1,
+ NF_GET = 2
+};
+
+static struct dm_buffer *__bufio_new(struct dm_bufio_client *c, sector_t block,
+ enum new_flag nf, struct dm_buffer **bp,
+ int *need_submit)
+{
+ struct dm_buffer *b, *new_b = NULL;
+
+ *need_submit = 0;
+
+ b = __find(c, block);
+ if (b) {
+ b->hold_count++;
+ __relink_lru(b, test_bit(B_DIRTY, &b->state) ||
+ test_bit(B_WRITING, &b->state));
+ return b;
+ }
+
+ if (nf == NF_GET)
+ return NULL;
+
+ new_b = __alloc_buffer_wait(c);
+
+ /*
+ * We've had a period where the mutex was unlocked, so need to
+ * recheck the hash table.
+ */
+ b = __find(c, block);
+ if (b) {
+ __free_buffer_wake(new_b);
+ b->hold_count++;
+ __relink_lru(b, test_bit(B_DIRTY, &b->state) ||
+ test_bit(B_WRITING, &b->state));
+ return b;
+ }
+
+ __check_watermark(c);
+
+ b = new_b;
+ b->hold_count = 1;
+ b->read_error = 0;
+ b->write_error = 0;
+ __link_buffer(b, block, LIST_CLEAN);
+
+ if (nf == NF_FRESH) {
+ b->state = 0;
+ return b;
+ }
+
+ b->state = 1 << B_READING;
+ *need_submit = 1;
+
+ return b;
+}
+
+/*
+ * The endio routine for reading: set the error, clear the bit and wake up
+ * anyone waiting on the buffer.
+ */
+static void read_endio(struct bio *bio, int error)
+{
+ struct dm_buffer *b = container_of(bio, struct dm_buffer, bio);
+
+ b->read_error = error;
+
+ BUG_ON(!test_bit(B_READING, &b->state));
+
+ smp_mb__before_clear_bit();
+ clear_bit(B_READING, &b->state);
+ smp_mb__after_clear_bit();
+
+ wake_up_bit(&b->state, B_READING);
+}
+
+/*
+ * A common routine for dm_bufio_new and dm_bufio_read. Operation of these
+ * functions is similar except that dm_bufio_new doesn't read the
+ * buffer from the disk (assuming that the caller overwrites all the data
+ * and uses dm_bufio_mark_buffer_dirty to write new data back).
+ */
+static void *new_read(struct dm_bufio_client *c, sector_t block,
+ enum new_flag nf, struct dm_buffer **bp)
+{
+ int need_submit;
+ struct dm_buffer *b;
+
+ dm_bufio_lock(c);
+ b = __bufio_new(c, block, nf, bp, &need_submit);
+ dm_bufio_unlock(c);
+
+ if (!b || IS_ERR(b))
+ return b;
+
+ if (need_submit)
+ submit_io(b, READ, b->block, read_endio);
+
+ wait_on_bit(&b->state, B_READING, do_io_schedule, TASK_UNINTERRUPTIBLE);
+
+ if (b->read_error) {
+ int error = b->read_error;
+
+ dm_bufio_release(b);
+
+ return ERR_PTR(error);
+ }
+
+ *bp = b;
+
+ return b->data;
+}
+
+void *dm_bufio_get(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp)
+{
+ return new_read(c, block, NF_GET, bp);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get);
+
+void *dm_bufio_read(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp)
+{
+ BUG_ON(dm_bufio_in_request());
+
+ return new_read(c, block, NF_READ, bp);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_read);
+
+void *dm_bufio_new(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp)
+{
+ BUG_ON(dm_bufio_in_request());
+
+ return new_read(c, block, NF_FRESH, bp);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_new);
+
+void dm_bufio_release(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ dm_bufio_lock(c);
+
+ BUG_ON(test_bit(B_READING, &b->state));
+ BUG_ON(!b->hold_count);
+
+ b->hold_count--;
+ if (!b->hold_count) {
+ wake_up(&c->free_buffer_wait);
+
+ /*
+ * If there were errors on the buffer, and the buffer is not
+ * to be written, free the buffer. There is no point in caching
+ * invalid buffer.
+ */
+ if ((b->read_error || b->write_error) &&
+ !test_bit(B_WRITING, &b->state) &&
+ !test_bit(B_DIRTY, &b->state)) {
+ __unlink_buffer(b);
+ __free_buffer_wake(b);
+ }
+ }
+
+ dm_bufio_unlock(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_release);
+
+void dm_bufio_mark_buffer_dirty(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ dm_bufio_lock(c);
+
+ if (!test_and_set_bit(B_DIRTY, &b->state))
+ __relink_lru(b, LIST_DIRTY);
+
+ dm_bufio_unlock(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_mark_buffer_dirty);
+
+void dm_bufio_write_dirty_buffers_async(struct dm_bufio_client *c)
+{
+ BUG_ON(dm_bufio_in_request());
+
+ dm_bufio_lock(c);
+ __write_dirty_buffers_async(c, 0);
+ dm_bufio_unlock(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_write_dirty_buffers_async);
+
+/*
+ * For performance, it is essential that the buffers are written asynchronously
+ * and simultaneously (so that the block layer can merge the writes) and then
+ * waited upon.
+ *
+ * Finally, we flush hardware disk cache.
+ */
+int dm_bufio_write_dirty_buffers(struct dm_bufio_client *c)
+{
+ int a, f;
+ unsigned long buffers_processed = 0;
+ struct dm_buffer *b, *tmp;
+
+ dm_bufio_lock(c);
+ __write_dirty_buffers_async(c, 0);
+
+again:
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[LIST_DIRTY], lru_list) {
+ int dropped_lock = 0;
+
+ if (buffers_processed < c->n_buffers[LIST_DIRTY])
+ buffers_processed++;
+
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ if (test_bit(B_WRITING, &b->state)) {
+ if (buffers_processed < c->n_buffers[LIST_DIRTY]) {
+ dropped_lock = 1;
+ b->hold_count++;
+ dm_bufio_unlock(c);
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule,
+ TASK_UNINTERRUPTIBLE);
+ dm_bufio_lock(c);
+ b->hold_count--;
+ } else
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule,
+ TASK_UNINTERRUPTIBLE);
+ }
+
+ if (!test_bit(B_DIRTY, &b->state) &&
+ !test_bit(B_WRITING, &b->state))
+ __relink_lru(b, LIST_CLEAN);
+
+ dm_bufio_cond_resched();
+
+ /*
+ * If we dropped the lock, the list is no longer consistent,
+ * so we must restart the search.
+ *
+ * In the most common case, the buffer just processed is
+ * relinked to the clean list, so we won't loop scanning the
+ * same buffer again and again.
+ *
+ * This may livelock if there is another thread simultaneously
+ * dirtying buffers, so we count the number of buffers walked
+ * and if it exceeds the total number of buffers, it means that
+ * someone is doing some writes simultaneously with us. In
+ * this case, stop, dropping the lock.
+ */
+ if (dropped_lock)
+ goto again;
+ }
+ wake_up(&c->free_buffer_wait);
+ dm_bufio_unlock(c);
+
+ a = xchg(&c->async_write_error, 0);
+ f = dm_bufio_issue_flush(c);
+ if (a)
+ return a;
+
+ return f;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_write_dirty_buffers);
+
+/*
+ * Use dm-io to send and empty barrier flush the device.
+ */
+int dm_bufio_issue_flush(struct dm_bufio_client *c)
+{
+ struct dm_io_request io_req = {
+ .bi_rw = REQ_FLUSH,
+ .mem.type = DM_IO_KMEM,
+ .mem.ptr.addr = NULL,
+ .client = c->dm_io,
+ };
+ struct dm_io_region io_reg = {
+ .bdev = c->bdev,
+ .sector = 0,
+ .count = 0,
+ };
+
+ BUG_ON(dm_bufio_in_request());
+
+ return dm_io(&io_req, 1, &io_reg, NULL);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_issue_flush);
+
+/*
+ * We first delete any other buffer that may be at that new location.
+ *
+ * Then, we write the buffer to the original location if it was dirty.
+ *
+ * Then, if we are the only one who is holding the buffer, relink the buffer
+ * in the hash queue for the new location.
+ *
+ * If there was someone else holding the buffer, we write it to the new
+ * location but not relink it, because that other user needs to have the buffer
+ * at the same place.
+ */
+void dm_bufio_release_move(struct dm_buffer *b, sector_t new_block)
+{
+ struct dm_bufio_client *c = b->c;
+ struct dm_buffer *new;
+
+ BUG_ON(dm_bufio_in_request());
+
+ dm_bufio_lock(c);
+
+retry:
+ new = __find(c, new_block);
+ if (new) {
+ if (new->hold_count) {
+ __wait_for_free_buffer(c);
+ goto retry;
+ }
+
+ /*
+ * FIXME: Is there any point waiting for a write that's going
+ * to be overwritten in a bit?
+ */
+ __make_buffer_clean(new);
+ __unlink_buffer(new);
+ __free_buffer_wake(new);
+ }
+
+ BUG_ON(!b->hold_count);
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ __write_dirty_buffer(b);
+ if (b->hold_count == 1) {
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+ set_bit(B_DIRTY, &b->state);
+ __unlink_buffer(b);
+ __link_buffer(b, new_block, LIST_DIRTY);
+ } else {
+ sector_t old_block;
+ wait_on_bit_lock(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+ /*
+ * Relink buffer to "new_block" so that write_callback
+ * sees "new_block" as a block number.
+ * After the write, link the buffer back to old_block.
+ * All this must be done in bufio lock, so that block number
+ * change isn't visible to other threads.
+ */
+ old_block = b->block;
+ __unlink_buffer(b);
+ __link_buffer(b, new_block, b->list_mode);
+ submit_io(b, WRITE, new_block, write_endio);
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+ __unlink_buffer(b);
+ __link_buffer(b, old_block, b->list_mode);
+ }
+
+ dm_bufio_unlock(c);
+ dm_bufio_release(b);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_release_move);
+
+unsigned dm_bufio_get_block_size(struct dm_bufio_client *c)
+{
+ return c->block_size;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_block_size);
+
+sector_t dm_bufio_get_device_size(struct dm_bufio_client *c)
+{
+ return i_size_read(c->bdev->bd_inode) >>
+ (SECTOR_SHIFT + c->sectors_per_block_bits);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_device_size);
+
+sector_t dm_bufio_get_block_number(struct dm_buffer *b)
+{
+ return b->block;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_block_number);
+
+void *dm_bufio_get_block_data(struct dm_buffer *b)
+{
+ return b->data;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_block_data);
+
+void *dm_bufio_get_aux_data(struct dm_buffer *b)
+{
+ return b + 1;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_aux_data);
+
+struct dm_bufio_client *dm_bufio_get_client(struct dm_buffer *b)
+{
+ return b->c;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_client);
+
+static void drop_buffers(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b;
+ int i;
+
+ BUG_ON(dm_bufio_in_request());
+
+ /*
+ * An optimization so that the buffers are not written one-by-one.
+ */
+ dm_bufio_write_dirty_buffers_async(c);
+
+ dm_bufio_lock(c);
+
+ while ((b = __get_unclaimed_buffer(c)))
+ __free_buffer_wake(b);
+
+ for (i = 0; i < LIST_SIZE; i++)
+ list_for_each_entry(b, &c->lru[i], lru_list)
+ DMERR("leaked buffer %llx, hold count %u, list %d",
+ (unsigned long long)b->block, b->hold_count, i);
+
+ for (i = 0; i < LIST_SIZE; i++)
+ BUG_ON(!list_empty(&c->lru[i]));
+
+ dm_bufio_unlock(c);
+}
+
+/*
+ * Test if the buffer is unused and too old, and commit it.
+ * At if noio is set, we must not do any I/O because we hold
+ * dm_bufio_clients_lock and we would risk deadlock if the I/O gets rerouted to
+ * different bufio client.
+ */
+static int __cleanup_old_buffer(struct dm_buffer *b, gfp_t gfp,
+ unsigned long max_jiffies)
+{
+ if (jiffies - b->last_accessed < max_jiffies)
+ return 1;
+
+ if (!(gfp & __GFP_IO)) {
+ if (test_bit(B_READING, &b->state) ||
+ test_bit(B_WRITING, &b->state) ||
+ test_bit(B_DIRTY, &b->state))
+ return 1;
+ }
+
+ if (b->hold_count)
+ return 1;
+
+ __make_buffer_clean(b);
+ __unlink_buffer(b);
+ __free_buffer_wake(b);
+
+ return 0;
+}
+
+static void __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
+ struct shrink_control *sc)
+{
+ int l;
+ struct dm_buffer *b, *tmp;
+
+ for (l = 0; l < LIST_SIZE; l++) {
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[l], lru_list)
+ if (!__cleanup_old_buffer(b, sc->gfp_mask, 0) &&
+ !--nr_to_scan)
+ return;
+ dm_bufio_cond_resched();
+ }
+}
+
+static int shrink(struct shrinker *shrinker, struct shrink_control *sc)
+{
+ struct dm_bufio_client *c =
+ container_of(shrinker, struct dm_bufio_client, shrinker);
+ unsigned long r;
+ unsigned long nr_to_scan = sc->nr_to_scan;
+
+ if (sc->gfp_mask & __GFP_IO)
+ dm_bufio_lock(c);
+ else if (!dm_bufio_trylock(c))
+ return !nr_to_scan ? 0 : -1;
+
+ if (nr_to_scan)
+ __scan(c, nr_to_scan, sc);
+
+ r = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];
+ if (r > INT_MAX)
+ r = INT_MAX;
+
+ dm_bufio_unlock(c);
+
+ return r;
+}
+
+/*
+ * Create the buffering interface
+ */
+struct dm_bufio_client *dm_bufio_client_create(struct block_device *bdev, unsigned block_size,
+ unsigned reserved_buffers, unsigned aux_size,
+ void (*alloc_callback)(struct dm_buffer *),
+ void (*write_callback)(struct dm_buffer *))
+{
+ int r;
+ struct dm_bufio_client *c;
+ unsigned i;
+
+ BUG_ON(block_size < 1 << SECTOR_SHIFT ||
+ (block_size & (block_size - 1)));
+
+ c = kmalloc(sizeof(*c), GFP_KERNEL);
+ if (!c) {
+ r = -ENOMEM;
+ goto bad_client;
+ }
+ c->cache_hash = vmalloc(sizeof(struct hlist_head) << DM_BUFIO_HASH_BITS);
+ if (!c->cache_hash) {
+ r = -ENOMEM;
+ goto bad_hash;
+ }
+
+ c->bdev = bdev;
+ c->block_size = block_size;
+ c->sectors_per_block_bits = ffs(block_size) - 1 - SECTOR_SHIFT;
+ c->pages_per_block_bits = (ffs(block_size) - 1 >= PAGE_SHIFT) ?
+ ffs(block_size) - 1 - PAGE_SHIFT : 0;
+ c->blocks_per_page_bits = (ffs(block_size) - 1 < PAGE_SHIFT ?
+ PAGE_SHIFT - (ffs(block_size) - 1) : 0);
+
+ c->aux_size = aux_size;
+ c->alloc_callback = alloc_callback;
+ c->write_callback = write_callback;
+
+ for (i = 0; i < LIST_SIZE; i++) {
+ INIT_LIST_HEAD(&c->lru[i]);
+ c->n_buffers[i] = 0;
+ }
+
+ for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
+ INIT_HLIST_HEAD(&c->cache_hash[i]);
+
+ mutex_init(&c->lock);
+ INIT_LIST_HEAD(&c->reserved_buffers);
+ c->need_reserved_buffers = reserved_buffers;
+
+ init_waitqueue_head(&c->free_buffer_wait);
+ c->async_write_error = 0;
+
+ c->dm_io = dm_io_client_create();
+ if (IS_ERR(c->dm_io)) {
+ r = PTR_ERR(c->dm_io);
+ goto bad_dm_io;
+ }
+
+ mutex_lock(&dm_bufio_clients_lock);
+ if (c->blocks_per_page_bits) {
+ if (!DM_BUFIO_CACHE_NAME(c)) {
+ DM_BUFIO_CACHE_NAME(c) = kasprintf(GFP_KERNEL, "dm_bufio_cache-%u", c->block_size);
+ if (!DM_BUFIO_CACHE_NAME(c)) {
+ r = -ENOMEM;
+ mutex_unlock(&dm_bufio_clients_lock);
+ goto bad_cache;
+ }
+ }
+
+ if (!DM_BUFIO_CACHE(c)) {
+ DM_BUFIO_CACHE(c) = kmem_cache_create(DM_BUFIO_CACHE_NAME(c),
+ c->block_size,
+ c->block_size, 0, NULL);
+ if (!DM_BUFIO_CACHE(c)) {
+ r = -ENOMEM;
+ mutex_unlock(&dm_bufio_clients_lock);
+ goto bad_cache;
+ }
+ }
+ }
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ while (c->need_reserved_buffers) {
+ struct dm_buffer *b = alloc_buffer(c, GFP_KERNEL);
+
+ if (!b) {
+ r = -ENOMEM;
+ goto bad_buffer;
+ }
+ __free_buffer_wake(b);
+ }
+
+ mutex_lock(&dm_bufio_clients_lock);
+ dm_bufio_client_count++;
+ list_add(&c->client_list, &dm_bufio_all_clients);
+ __cache_size_refresh();
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ c->shrinker.shrink = shrink;
+ c->shrinker.seeks = 1;
+ c->shrinker.batch = 0;
+ register_shrinker(&c->shrinker);
+
+ return c;
+
+bad_buffer:
+bad_cache:
+ while (!list_empty(&c->reserved_buffers)) {
+ struct dm_buffer *b = list_entry(c->reserved_buffers.next,
+ struct dm_buffer, lru_list);
+ list_del(&b->lru_list);
+ free_buffer(b);
+ }
+ dm_io_client_destroy(c->dm_io);
+bad_dm_io:
+ vfree(c->cache_hash);
+bad_hash:
+ kfree(c);
+bad_client:
+ return ERR_PTR(r);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_client_create);
+
+/*
+ * Free the buffering interface.
+ * It is required that there are no references on any buffers.
+ */
+void dm_bufio_client_destroy(struct dm_bufio_client *c)
+{
+ unsigned i;
+
+ drop_buffers(c);
+
+ unregister_shrinker(&c->shrinker);
+
+ mutex_lock(&dm_bufio_clients_lock);
+
+ list_del(&c->client_list);
+ dm_bufio_client_count--;
+ __cache_size_refresh();
+
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
+ BUG_ON(!hlist_empty(&c->cache_hash[i]));
+
+ BUG_ON(c->need_reserved_buffers);
+
+ while (!list_empty(&c->reserved_buffers)) {
+ struct dm_buffer *b = list_entry(c->reserved_buffers.next,
+ struct dm_buffer, lru_list);
+ list_del(&b->lru_list);
+ free_buffer(b);
+ }
+
+ for (i = 0; i < LIST_SIZE; i++)
+ if (c->n_buffers[i])
+ DMERR("leaked buffer count %d: %ld", i, c->n_buffers[i]);
+
+ for (i = 0; i < LIST_SIZE; i++)
+ BUG_ON(c->n_buffers[i]);
+
+ dm_io_client_destroy(c->dm_io);
+ vfree(c->cache_hash);
+ kfree(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_client_destroy);
+
+static void cleanup_old_buffers(void)
+{
+ unsigned long max_age = dm_bufio_max_age;
+ struct dm_bufio_client *c;
+
+ barrier();
+
+ if (max_age > ULONG_MAX / HZ)
+ max_age = ULONG_MAX / HZ;
+
+ mutex_lock(&dm_bufio_clients_lock);
+ list_for_each_entry(c, &dm_bufio_all_clients, client_list) {
+ if (!dm_bufio_trylock(c))
+ continue;
+
+ while (!list_empty(&c->lru[LIST_CLEAN])) {
+ struct dm_buffer *b;
+ b = list_entry(c->lru[LIST_CLEAN].prev,
+ struct dm_buffer, lru_list);
+ if (__cleanup_old_buffer(b, 0, max_age * HZ))
+ break;
+ dm_bufio_cond_resched();
+ }
+
+ dm_bufio_unlock(c);
+ dm_bufio_cond_resched();
+ }
+ mutex_unlock(&dm_bufio_clients_lock);
+}
+
+static struct workqueue_struct *dm_bufio_wq;
+static struct delayed_work dm_bufio_work;
+
+static void work_fn(struct work_struct *w)
+{
+ cleanup_old_buffers();
+
+ queue_delayed_work(dm_bufio_wq, &dm_bufio_work,
+ DM_BUFIO_WORK_TIMER_SECS * HZ);
+}
+
+/*----------------------------------------------------------------
+ * Module setup
+ *--------------------------------------------------------------*/
+
+/*
+ * This is called only once for the whole dm_bufio module.
+ * It initializes memory limit.
+ */
+static int __init dm_bufio_init(void)
+{
+ __u64 mem;
+
+ memset(&dm_bufio_caches, 0, sizeof dm_bufio_caches);
+ memset(&dm_bufio_cache_names, 0, sizeof dm_bufio_cache_names);
+
+ mem = (__u64)((totalram_pages - totalhigh_pages) *
+ DM_BUFIO_MEMORY_PERCENT / 100) << PAGE_SHIFT;
+
+ if (mem > ULONG_MAX)
+ mem = ULONG_MAX;
+
+#ifdef CONFIG_MMU
+ /*
+ * Get the size of vmalloc space the same way as VMALLOC_TOTAL
+ * in fs/proc/internal.h
+ */
+ if (mem > (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100)
+ mem = (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100;
+#endif
+
+ dm_bufio_default_cache_size = mem;
+
+ mutex_lock(&dm_bufio_clients_lock);
+ __cache_size_refresh();
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ dm_bufio_wq = create_singlethread_workqueue("dm_bufio_cache");
+ if (!dm_bufio_wq)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&dm_bufio_work, work_fn);
+ queue_delayed_work(dm_bufio_wq, &dm_bufio_work,
+ DM_BUFIO_WORK_TIMER_SECS * HZ);
+
+ return 0;
+}
+
+/*
+ * This is called once when unloading the dm_bufio module.
+ */
+static void __exit dm_bufio_exit(void)
+{
+ int bug = 0;
+ int i;
+
+ cancel_delayed_work_sync(&dm_bufio_work);
+ destroy_workqueue(dm_bufio_wq);
+
+ for (i = 0; i < ARRAY_SIZE(dm_bufio_caches); i++) {
+ struct kmem_cache *kc = dm_bufio_caches[i];
+
+ if (kc)
+ kmem_cache_destroy(kc);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(dm_bufio_cache_names); i++)
+ kfree(dm_bufio_cache_names[i]);
+
+ if (dm_bufio_client_count) {
+ DMCRIT("%s: dm_bufio_client_count leaked: %d",
+ __func__, dm_bufio_client_count);
+ bug = 1;
+ }
+
+ if (dm_bufio_current_allocated) {
+ DMCRIT("%s: dm_bufio_current_allocated leaked: %lu",
+ __func__, dm_bufio_current_allocated);
+ bug = 1;
+ }
+
+ if (dm_bufio_allocated_get_free_pages) {
+ DMCRIT("%s: dm_bufio_allocated_get_free_pages leaked: %lu",
+ __func__, dm_bufio_allocated_get_free_pages);
+ bug = 1;
+ }
+
+ if (dm_bufio_allocated_vmalloc) {
+ DMCRIT("%s: dm_bufio_vmalloc leaked: %lu",
+ __func__, dm_bufio_allocated_vmalloc);
+ bug = 1;
+ }
+
+ if (bug)
+ BUG();
+}
+
+module_init(dm_bufio_init)
+module_exit(dm_bufio_exit)
+
+module_param_named(max_cache_size_bytes, dm_bufio_cache_size, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(max_cache_size_bytes, "Size of metadata cache");
+
+module_param_named(max_age_seconds, dm_bufio_max_age, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(max_age_seconds, "Max age of a buffer in seconds");
+
+module_param_named(peak_allocated_bytes, dm_bufio_peak_allocated, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(peak_allocated_bytes, "Tracks the maximum allocated memory");
+
+module_param_named(allocated_kmem_cache_bytes, dm_bufio_allocated_kmem_cache, ulong, S_IRUGO);
+MODULE_PARM_DESC(allocated_kmem_cache_bytes, "Memory allocated with kmem_cache_alloc");
+
+module_param_named(allocated_get_free_pages_bytes, dm_bufio_allocated_get_free_pages, ulong, S_IRUGO);
+MODULE_PARM_DESC(allocated_get_free_pages_bytes, "Memory allocated with get_free_pages");
+
+module_param_named(allocated_vmalloc_bytes, dm_bufio_allocated_vmalloc, ulong, S_IRUGO);
+MODULE_PARM_DESC(allocated_vmalloc_bytes, "Memory allocated with vmalloc");
+
+module_param_named(current_allocated_bytes, dm_bufio_current_allocated, ulong, S_IRUGO);
+MODULE_PARM_DESC(current_allocated_bytes, "Memory currently used by the cache");
+
+MODULE_AUTHOR("Mikulas Patocka <dm-devel@redhat.com>");
+MODULE_DESCRIPTION(DM_NAME " buffered I/O library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-bufio.h b/drivers/md/dm-bufio.h
new file mode 100644
index 0000000..5c4c3a0
--- /dev/null
+++ b/drivers/md/dm-bufio.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2009-2011 Red Hat, Inc.
+ *
+ * Author: Mikulas Patocka <mpatocka@redhat.com>
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_BUFIO_H
+#define DM_BUFIO_H
+
+#include <linux/blkdev.h>
+#include <linux/types.h>
+
+/*----------------------------------------------------------------*/
+
+struct dm_bufio_client;
+struct dm_buffer;
+
+/*
+ * Create a buffered IO cache on a given device
+ */
+struct dm_bufio_client *
+dm_bufio_client_create(struct block_device *bdev, unsigned block_size,
+ unsigned reserved_buffers, unsigned aux_size,
+ void (*alloc_callback)(struct dm_buffer *),
+ void (*write_callback)(struct dm_buffer *));
+
+/*
+ * Release a buffered IO cache.
+ */
+void dm_bufio_client_destroy(struct dm_bufio_client *c);
+
+/*
+ * WARNING: to avoid deadlocks, these conditions are observed:
+ *
+ * - At most one thread can hold at most "reserved_buffers" simultaneously.
+ * - Each other threads can hold at most one buffer.
+ * - Threads which call only dm_bufio_get can hold unlimited number of
+ * buffers.
+ */
+
+/*
+ * Read a given block from disk. Returns pointer to data. Returns a
+ * pointer to dm_buffer that can be used to release the buffer or to make
+ * it dirty.
+ */
+void *dm_bufio_read(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp);
+
+/*
+ * Like dm_bufio_read, but return buffer from cache, don't read
+ * it. If the buffer is not in the cache, return NULL.
+ */
+void *dm_bufio_get(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp);
+
+/*
+ * Like dm_bufio_read, but don't read anything from the disk. It is
+ * expected that the caller initializes the buffer and marks it dirty.
+ */
+void *dm_bufio_new(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp);
+
+/*
+ * Release a reference obtained with dm_bufio_{read,get,new}. The data
+ * pointer and dm_buffer pointer is no longer valid after this call.
+ */
+void dm_bufio_release(struct dm_buffer *b);
+
+/*
+ * Mark a buffer dirty. It should be called after the buffer is modified.
+ *
+ * In case of memory pressure, the buffer may be written after
+ * dm_bufio_mark_buffer_dirty, but before dm_bufio_write_dirty_buffers. So
+ * dm_bufio_write_dirty_buffers guarantees that the buffer is on-disk but
+ * the actual writing may occur earlier.
+ */
+void dm_bufio_mark_buffer_dirty(struct dm_buffer *b);
+
+/*
+ * Initiate writing of dirty buffers, without waiting for completion.
+ */
+void dm_bufio_write_dirty_buffers_async(struct dm_bufio_client *c);
+
+/*
+ * Write all dirty buffers. Guarantees that all dirty buffers created prior
+ * to this call are on disk when this call exits.
+ */
+int dm_bufio_write_dirty_buffers(struct dm_bufio_client *c);
+
+/*
+ * Send an empty write barrier to the device to flush hardware disk cache.
+ */
+int dm_bufio_issue_flush(struct dm_bufio_client *c);
+
+/*
+ * Like dm_bufio_release but also move the buffer to the new
+ * block. dm_bufio_write_dirty_buffers is needed to commit the new block.
+ */
+void dm_bufio_release_move(struct dm_buffer *b, sector_t new_block);
+
+unsigned dm_bufio_get_block_size(struct dm_bufio_client *c);
+sector_t dm_bufio_get_device_size(struct dm_bufio_client *c);
+sector_t dm_bufio_get_block_number(struct dm_buffer *b);
+void *dm_bufio_get_block_data(struct dm_buffer *b);
+void *dm_bufio_get_aux_data(struct dm_buffer *b);
+struct dm_bufio_client *dm_bufio_get_client(struct dm_buffer *b);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 2e9a3ca..31c2dc2 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1215,6 +1215,7 @@
struct hash_cell *hc;
struct dm_table *t;
struct mapped_device *md;
+ struct target_type *immutable_target_type;
md = find_device(param);
if (!md)
@@ -1230,6 +1231,16 @@
goto out;
}
+ immutable_target_type = dm_get_immutable_target_type(md);
+ if (immutable_target_type &&
+ (immutable_target_type != dm_table_get_immutable_target_type(t))) {
+ DMWARN("can't replace immutable target type %s",
+ immutable_target_type->name);
+ dm_table_destroy(t);
+ r = -EINVAL;
+ goto out;
+ }
+
/* Protect md->type and md->queue against concurrent table loads. */
dm_lock_md_type(md);
if (dm_get_md_type(md) == DM_TYPE_NONE)
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 32ac708..bed444c 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -66,6 +66,8 @@
struct list_head pages_jobs;
};
+static struct page_list zero_page_list;
+
static void wake(struct dm_kcopyd_client *kc)
{
queue_work(kc->kcopyd_wq, &kc->kcopyd_work);
@@ -254,6 +256,9 @@
if (!_job_cache)
return -ENOMEM;
+ zero_page_list.next = &zero_page_list;
+ zero_page_list.page = ZERO_PAGE(0);
+
return 0;
}
@@ -322,7 +327,7 @@
dm_kcopyd_notify_fn fn = job->fn;
struct dm_kcopyd_client *kc = job->kc;
- if (job->pages)
+ if (job->pages && job->pages != &zero_page_list)
kcopyd_put_pages(kc, job->pages);
/*
* If this is the master job, the sub jobs have already
@@ -484,6 +489,8 @@
atomic_inc(&kc->nr_jobs);
if (unlikely(!job->source.count))
push(&kc->complete_jobs, job);
+ else if (job->pages == &zero_page_list)
+ push(&kc->io_jobs, job);
else
push(&kc->pages_jobs, job);
wake(kc);
@@ -592,14 +599,20 @@
job->flags = flags;
job->read_err = 0;
job->write_err = 0;
- job->rw = READ;
-
- job->source = *from;
job->num_dests = num_dests;
memcpy(&job->dests, dests, sizeof(*dests) * num_dests);
- job->pages = NULL;
+ if (from) {
+ job->source = *from;
+ job->pages = NULL;
+ job->rw = READ;
+ } else {
+ memset(&job->source, 0, sizeof job->source);
+ job->source.count = job->dests[0].count;
+ job->pages = &zero_page_list;
+ job->rw = WRITE;
+ }
job->fn = fn;
job->context = context;
@@ -617,6 +630,14 @@
}
EXPORT_SYMBOL(dm_kcopyd_copy);
+int dm_kcopyd_zero(struct dm_kcopyd_client *kc,
+ unsigned num_dests, struct dm_io_region *dests,
+ unsigned flags, dm_kcopyd_notify_fn fn, void *context)
+{
+ return dm_kcopyd_copy(kc, NULL, num_dests, dests, flags, fn, context);
+}
+EXPORT_SYMBOL(dm_kcopyd_zero);
+
void *dm_kcopyd_prepare_callback(struct dm_kcopyd_client *kc,
dm_kcopyd_notify_fn fn, void *context)
{
diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c
index 1021c89..8db3862 100644
--- a/drivers/md/dm-log-userspace-base.c
+++ b/drivers/md/dm-log-userspace-base.c
@@ -30,6 +30,7 @@
struct log_c {
struct dm_target *ti;
+ struct dm_dev *log_dev;
uint32_t region_size;
region_t region_count;
uint64_t luid;
@@ -146,7 +147,7 @@
* <UUID> <other args>
* Where 'other args' is the userspace implementation specific log
* arguments. An example might be:
- * <UUID> clustered_disk <arg count> <log dev> <region_size> [[no]sync]
+ * <UUID> clustered-disk <arg count> <log dev> <region_size> [[no]sync]
*
* So, this module will strip off the <UUID> for identification purposes
* when communicating with userspace about a log; but will pass on everything
@@ -161,13 +162,15 @@
struct log_c *lc = NULL;
uint64_t rdata;
size_t rdata_size = sizeof(rdata);
+ char *devices_rdata = NULL;
+ size_t devices_rdata_size = DM_NAME_LEN;
if (argc < 3) {
DMWARN("Too few arguments to userspace dirty log");
return -EINVAL;
}
- lc = kmalloc(sizeof(*lc), GFP_KERNEL);
+ lc = kzalloc(sizeof(*lc), GFP_KERNEL);
if (!lc) {
DMWARN("Unable to allocate userspace log context.");
return -ENOMEM;
@@ -195,9 +198,19 @@
return str_size;
}
- /* Send table string */
+ devices_rdata = kzalloc(devices_rdata_size, GFP_KERNEL);
+ if (!devices_rdata) {
+ DMERR("Failed to allocate memory for device information");
+ r = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * Send table string and get back any opened device.
+ */
r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR,
- ctr_str, str_size, NULL, NULL);
+ ctr_str, str_size,
+ devices_rdata, &devices_rdata_size);
if (r < 0) {
if (r == -ESRCH)
@@ -220,7 +233,20 @@
lc->region_size = (uint32_t)rdata;
lc->region_count = dm_sector_div_up(ti->len, lc->region_size);
+ if (devices_rdata_size) {
+ if (devices_rdata[devices_rdata_size - 1] != '\0') {
+ DMERR("DM_ULOG_CTR device return string not properly terminated");
+ r = -EINVAL;
+ goto out;
+ }
+ r = dm_get_device(ti, devices_rdata,
+ dm_table_get_mode(ti->table), &lc->log_dev);
+ if (r)
+ DMERR("Failed to register %s with device-mapper",
+ devices_rdata);
+ }
out:
+ kfree(devices_rdata);
if (r) {
kfree(lc);
kfree(ctr_str);
@@ -241,6 +267,9 @@
NULL, 0,
NULL, NULL);
+ if (lc->log_dev)
+ dm_put_device(lc->ti, lc->log_dev);
+
kfree(lc->usr_argv_str);
kfree(lc);
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 37a3726..11fa96d 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -1017,30 +1017,56 @@
struct raid_set *rs = ti->private;
unsigned raid_param_cnt = 1; /* at least 1 for chunksize */
unsigned sz = 0;
- int i;
+ int i, array_in_sync = 0;
sector_t sync;
switch (type) {
case STATUSTYPE_INFO:
DMEMIT("%s %d ", rs->raid_type->name, rs->md.raid_disks);
- for (i = 0; i < rs->md.raid_disks; i++) {
- if (test_bit(Faulty, &rs->dev[i].rdev.flags))
- DMEMIT("D");
- else if (test_bit(In_sync, &rs->dev[i].rdev.flags))
- DMEMIT("A");
- else
- DMEMIT("a");
- }
-
if (test_bit(MD_RECOVERY_RUNNING, &rs->md.recovery))
sync = rs->md.curr_resync_completed;
else
sync = rs->md.recovery_cp;
- if (sync > rs->md.resync_max_sectors)
+ if (sync >= rs->md.resync_max_sectors) {
+ array_in_sync = 1;
sync = rs->md.resync_max_sectors;
+ } else {
+ /*
+ * The array may be doing an initial sync, or it may
+ * be rebuilding individual components. If all the
+ * devices are In_sync, then it is the array that is
+ * being initialized.
+ */
+ for (i = 0; i < rs->md.raid_disks; i++)
+ if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
+ array_in_sync = 1;
+ }
+ /*
+ * Status characters:
+ * 'D' = Dead/Failed device
+ * 'a' = Alive but not in-sync
+ * 'A' = Alive and in-sync
+ */
+ for (i = 0; i < rs->md.raid_disks; i++) {
+ if (test_bit(Faulty, &rs->dev[i].rdev.flags))
+ DMEMIT("D");
+ else if (!array_in_sync ||
+ !test_bit(In_sync, &rs->dev[i].rdev.flags))
+ DMEMIT("a");
+ else
+ DMEMIT("A");
+ }
+ /*
+ * In-sync ratio:
+ * The in-sync ratio shows the progress of:
+ * - Initializing the array
+ * - Rebuilding a subset of devices of the array
+ * The user can distinguish between the two by referring
+ * to the status characters.
+ */
DMEMIT(" %llu/%llu",
(unsigned long long) sync,
(unsigned long long) rs->md.resync_max_sectors);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index bc04518..8e91321 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -54,7 +54,9 @@
sector_t *highs;
struct dm_target *targets;
+ struct target_type *immutable_target_type;
unsigned integrity_supported:1;
+ unsigned singleton:1;
/*
* Indicates the rw permissions for the new logical
@@ -740,6 +742,12 @@
char **argv;
struct dm_target *tgt;
+ if (t->singleton) {
+ DMERR("%s: target type %s must appear alone in table",
+ dm_device_name(t->md), t->targets->type->name);
+ return -EINVAL;
+ }
+
if ((r = check_space(t)))
return r;
@@ -758,6 +766,36 @@
return -EINVAL;
}
+ if (dm_target_needs_singleton(tgt->type)) {
+ if (t->num_targets) {
+ DMERR("%s: target type %s must appear alone in table",
+ dm_device_name(t->md), type);
+ return -EINVAL;
+ }
+ t->singleton = 1;
+ }
+
+ if (dm_target_always_writeable(tgt->type) && !(t->mode & FMODE_WRITE)) {
+ DMERR("%s: target type %s may not be included in read-only tables",
+ dm_device_name(t->md), type);
+ return -EINVAL;
+ }
+
+ if (t->immutable_target_type) {
+ if (t->immutable_target_type != tgt->type) {
+ DMERR("%s: immutable target type %s cannot be mixed with other target types",
+ dm_device_name(t->md), t->immutable_target_type->name);
+ return -EINVAL;
+ }
+ } else if (dm_target_is_immutable(tgt->type)) {
+ if (t->num_targets) {
+ DMERR("%s: immutable target type %s cannot be mixed with other target types",
+ dm_device_name(t->md), tgt->type->name);
+ return -EINVAL;
+ }
+ t->immutable_target_type = tgt->type;
+ }
+
tgt->table = t;
tgt->begin = start;
tgt->len = len;
@@ -915,6 +953,11 @@
return t->type;
}
+struct target_type *dm_table_get_immutable_target_type(struct dm_table *t)
+{
+ return t->immutable_target_type;
+}
+
bool dm_table_request_based(struct dm_table *t)
{
return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
@@ -1299,6 +1342,31 @@
return 1;
}
+static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return q && blk_queue_nonrot(q);
+}
+
+static bool dm_table_is_nonrot(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned i = 0;
+
+ /* Ensure that all underlying device are non-rotational. */
+ while (i < dm_table_get_num_targets(t)) {
+ ti = dm_table_get_target(t, i++);
+
+ if (!ti->type->iterate_devices ||
+ !ti->type->iterate_devices(ti, device_is_nonrot, NULL))
+ return 0;
+ }
+
+ return 1;
+}
+
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
struct queue_limits *limits)
{
@@ -1324,6 +1392,11 @@
if (!dm_table_discard_zeroes_data(t))
q->limits.discard_zeroes_data = 0;
+ if (dm_table_is_nonrot(t))
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
+
dm_table_set_integrity(t);
/*
diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c
new file mode 100644
index 0000000..59c4f04
--- /dev/null
+++ b/drivers/md/dm-thin-metadata.c
@@ -0,0 +1,1391 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-thin-metadata.h"
+#include "persistent-data/dm-btree.h"
+#include "persistent-data/dm-space-map.h"
+#include "persistent-data/dm-space-map-disk.h"
+#include "persistent-data/dm-transaction-manager.h"
+
+#include <linux/list.h>
+#include <linux/device-mapper.h>
+#include <linux/workqueue.h>
+
+/*--------------------------------------------------------------------------
+ * As far as the metadata goes, there is:
+ *
+ * - A superblock in block zero, taking up fewer than 512 bytes for
+ * atomic writes.
+ *
+ * - A space map managing the metadata blocks.
+ *
+ * - A space map managing the data blocks.
+ *
+ * - A btree mapping our internal thin dev ids onto struct disk_device_details.
+ *
+ * - A hierarchical btree, with 2 levels which effectively maps (thin
+ * dev id, virtual block) -> block_time. Block time is a 64-bit
+ * field holding the time in the low 24 bits, and block in the top 48
+ * bits.
+ *
+ * BTrees consist solely of btree_nodes, that fill a block. Some are
+ * internal nodes, as such their values are a __le64 pointing to other
+ * nodes. Leaf nodes can store data of any reasonable size (ie. much
+ * smaller than the block size). The nodes consist of the header,
+ * followed by an array of keys, followed by an array of values. We have
+ * to binary search on the keys so they're all held together to help the
+ * cpu cache.
+ *
+ * Space maps have 2 btrees:
+ *
+ * - One maps a uint64_t onto a struct index_entry. Which points to a
+ * bitmap block, and has some details about how many free entries there
+ * are etc.
+ *
+ * - The bitmap blocks have a header (for the checksum). Then the rest
+ * of the block is pairs of bits. With the meaning being:
+ *
+ * 0 - ref count is 0
+ * 1 - ref count is 1
+ * 2 - ref count is 2
+ * 3 - ref count is higher than 2
+ *
+ * - If the count is higher than 2 then the ref count is entered in a
+ * second btree that directly maps the block_address to a uint32_t ref
+ * count.
+ *
+ * The space map metadata variant doesn't have a bitmaps btree. Instead
+ * it has one single blocks worth of index_entries. This avoids
+ * recursive issues with the bitmap btree needing to allocate space in
+ * order to insert. With a small data block size such as 64k the
+ * metadata support data devices that are hundreds of terrabytes.
+ *
+ * The space maps allocate space linearly from front to back. Space that
+ * is freed in a transaction is never recycled within that transaction.
+ * To try and avoid fragmenting _free_ space the allocator always goes
+ * back and fills in gaps.
+ *
+ * All metadata io is in THIN_METADATA_BLOCK_SIZE sized/aligned chunks
+ * from the block manager.
+ *--------------------------------------------------------------------------*/
+
+#define DM_MSG_PREFIX "thin metadata"
+
+#define THIN_SUPERBLOCK_MAGIC 27022010
+#define THIN_SUPERBLOCK_LOCATION 0
+#define THIN_VERSION 1
+#define THIN_METADATA_CACHE_SIZE 64
+#define SECTOR_TO_BLOCK_SHIFT 3
+
+/* This should be plenty */
+#define SPACE_MAP_ROOT_SIZE 128
+
+/*
+ * Little endian on-disk superblock and device details.
+ */
+struct thin_disk_superblock {
+ __le32 csum; /* Checksum of superblock except for this field. */
+ __le32 flags;
+ __le64 blocknr; /* This block number, dm_block_t. */
+
+ __u8 uuid[16];
+ __le64 magic;
+ __le32 version;
+ __le32 time;
+
+ __le64 trans_id;
+
+ /*
+ * Root held by userspace transactions.
+ */
+ __le64 held_root;
+
+ __u8 data_space_map_root[SPACE_MAP_ROOT_SIZE];
+ __u8 metadata_space_map_root[SPACE_MAP_ROOT_SIZE];
+
+ /*
+ * 2-level btree mapping (dev_id, (dev block, time)) -> data block
+ */
+ __le64 data_mapping_root;
+
+ /*
+ * Device detail root mapping dev_id -> device_details
+ */
+ __le64 device_details_root;
+
+ __le32 data_block_size; /* In 512-byte sectors. */
+
+ __le32 metadata_block_size; /* In 512-byte sectors. */
+ __le64 metadata_nr_blocks;
+
+ __le32 compat_flags;
+ __le32 compat_ro_flags;
+ __le32 incompat_flags;
+} __packed;
+
+struct disk_device_details {
+ __le64 mapped_blocks;
+ __le64 transaction_id; /* When created. */
+ __le32 creation_time;
+ __le32 snapshotted_time;
+} __packed;
+
+struct dm_pool_metadata {
+ struct hlist_node hash;
+
+ struct block_device *bdev;
+ struct dm_block_manager *bm;
+ struct dm_space_map *metadata_sm;
+ struct dm_space_map *data_sm;
+ struct dm_transaction_manager *tm;
+ struct dm_transaction_manager *nb_tm;
+
+ /*
+ * Two-level btree.
+ * First level holds thin_dev_t.
+ * Second level holds mappings.
+ */
+ struct dm_btree_info info;
+
+ /*
+ * Non-blocking version of the above.
+ */
+ struct dm_btree_info nb_info;
+
+ /*
+ * Just the top level for deleting whole devices.
+ */
+ struct dm_btree_info tl_info;
+
+ /*
+ * Just the bottom level for creating new devices.
+ */
+ struct dm_btree_info bl_info;
+
+ /*
+ * Describes the device details btree.
+ */
+ struct dm_btree_info details_info;
+
+ struct rw_semaphore root_lock;
+ uint32_t time;
+ int need_commit;
+ dm_block_t root;
+ dm_block_t details_root;
+ struct list_head thin_devices;
+ uint64_t trans_id;
+ unsigned long flags;
+ sector_t data_block_size;
+};
+
+struct dm_thin_device {
+ struct list_head list;
+ struct dm_pool_metadata *pmd;
+ dm_thin_id id;
+
+ int open_count;
+ int changed;
+ uint64_t mapped_blocks;
+ uint64_t transaction_id;
+ uint32_t creation_time;
+ uint32_t snapshotted_time;
+};
+
+/*----------------------------------------------------------------
+ * superblock validator
+ *--------------------------------------------------------------*/
+
+#define SUPERBLOCK_CSUM_XOR 160774
+
+static void sb_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct thin_disk_superblock *disk_super = dm_block_data(b);
+
+ disk_super->blocknr = cpu_to_le64(dm_block_location(b));
+ disk_super->csum = cpu_to_le32(dm_bm_checksum(&disk_super->flags,
+ block_size - sizeof(__le32),
+ SUPERBLOCK_CSUM_XOR));
+}
+
+static int sb_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct thin_disk_superblock *disk_super = dm_block_data(b);
+ __le32 csum_le;
+
+ if (dm_block_location(b) != le64_to_cpu(disk_super->blocknr)) {
+ DMERR("sb_check failed: blocknr %llu: "
+ "wanted %llu", le64_to_cpu(disk_super->blocknr),
+ (unsigned long long)dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ if (le64_to_cpu(disk_super->magic) != THIN_SUPERBLOCK_MAGIC) {
+ DMERR("sb_check failed: magic %llu: "
+ "wanted %llu", le64_to_cpu(disk_super->magic),
+ (unsigned long long)THIN_SUPERBLOCK_MAGIC);
+ return -EILSEQ;
+ }
+
+ csum_le = cpu_to_le32(dm_bm_checksum(&disk_super->flags,
+ block_size - sizeof(__le32),
+ SUPERBLOCK_CSUM_XOR));
+ if (csum_le != disk_super->csum) {
+ DMERR("sb_check failed: csum %u: wanted %u",
+ le32_to_cpu(csum_le), le32_to_cpu(disk_super->csum));
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+static struct dm_block_validator sb_validator = {
+ .name = "superblock",
+ .prepare_for_write = sb_prepare_for_write,
+ .check = sb_check
+};
+
+/*----------------------------------------------------------------
+ * Methods for the btree value types
+ *--------------------------------------------------------------*/
+
+static uint64_t pack_block_time(dm_block_t b, uint32_t t)
+{
+ return (b << 24) | t;
+}
+
+static void unpack_block_time(uint64_t v, dm_block_t *b, uint32_t *t)
+{
+ *b = v >> 24;
+ *t = v & ((1 << 24) - 1);
+}
+
+static void data_block_inc(void *context, void *value_le)
+{
+ struct dm_space_map *sm = context;
+ __le64 v_le;
+ uint64_t b;
+ uint32_t t;
+
+ memcpy(&v_le, value_le, sizeof(v_le));
+ unpack_block_time(le64_to_cpu(v_le), &b, &t);
+ dm_sm_inc_block(sm, b);
+}
+
+static void data_block_dec(void *context, void *value_le)
+{
+ struct dm_space_map *sm = context;
+ __le64 v_le;
+ uint64_t b;
+ uint32_t t;
+
+ memcpy(&v_le, value_le, sizeof(v_le));
+ unpack_block_time(le64_to_cpu(v_le), &b, &t);
+ dm_sm_dec_block(sm, b);
+}
+
+static int data_block_equal(void *context, void *value1_le, void *value2_le)
+{
+ __le64 v1_le, v2_le;
+ uint64_t b1, b2;
+ uint32_t t;
+
+ memcpy(&v1_le, value1_le, sizeof(v1_le));
+ memcpy(&v2_le, value2_le, sizeof(v2_le));
+ unpack_block_time(le64_to_cpu(v1_le), &b1, &t);
+ unpack_block_time(le64_to_cpu(v2_le), &b2, &t);
+
+ return b1 == b2;
+}
+
+static void subtree_inc(void *context, void *value)
+{
+ struct dm_btree_info *info = context;
+ __le64 root_le;
+ uint64_t root;
+
+ memcpy(&root_le, value, sizeof(root_le));
+ root = le64_to_cpu(root_le);
+ dm_tm_inc(info->tm, root);
+}
+
+static void subtree_dec(void *context, void *value)
+{
+ struct dm_btree_info *info = context;
+ __le64 root_le;
+ uint64_t root;
+
+ memcpy(&root_le, value, sizeof(root_le));
+ root = le64_to_cpu(root_le);
+ if (dm_btree_del(info, root))
+ DMERR("btree delete failed\n");
+}
+
+static int subtree_equal(void *context, void *value1_le, void *value2_le)
+{
+ __le64 v1_le, v2_le;
+ memcpy(&v1_le, value1_le, sizeof(v1_le));
+ memcpy(&v2_le, value2_le, sizeof(v2_le));
+
+ return v1_le == v2_le;
+}
+
+/*----------------------------------------------------------------*/
+
+static int superblock_all_zeroes(struct dm_block_manager *bm, int *result)
+{
+ int r;
+ unsigned i;
+ struct dm_block *b;
+ __le64 *data_le, zero = cpu_to_le64(0);
+ unsigned block_size = dm_bm_block_size(bm) / sizeof(__le64);
+
+ /*
+ * We can't use a validator here - it may be all zeroes.
+ */
+ r = dm_bm_read_lock(bm, THIN_SUPERBLOCK_LOCATION, NULL, &b);
+ if (r)
+ return r;
+
+ data_le = dm_block_data(b);
+ *result = 1;
+ for (i = 0; i < block_size; i++) {
+ if (data_le[i] != zero) {
+ *result = 0;
+ break;
+ }
+ }
+
+ return dm_bm_unlock(b);
+}
+
+static int init_pmd(struct dm_pool_metadata *pmd,
+ struct dm_block_manager *bm,
+ dm_block_t nr_blocks, int create)
+{
+ int r;
+ struct dm_space_map *sm, *data_sm;
+ struct dm_transaction_manager *tm;
+ struct dm_block *sblock;
+
+ if (create) {
+ r = dm_tm_create_with_sm(bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &tm, &sm, &sblock);
+ if (r < 0) {
+ DMERR("tm_create_with_sm failed");
+ return r;
+ }
+
+ data_sm = dm_sm_disk_create(tm, nr_blocks);
+ if (IS_ERR(data_sm)) {
+ DMERR("sm_disk_create failed");
+ r = PTR_ERR(data_sm);
+ goto bad;
+ }
+ } else {
+ struct thin_disk_superblock *disk_super = NULL;
+ size_t space_map_root_offset =
+ offsetof(struct thin_disk_superblock, metadata_space_map_root);
+
+ r = dm_tm_open_with_sm(bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, space_map_root_offset,
+ SPACE_MAP_ROOT_SIZE, &tm, &sm, &sblock);
+ if (r < 0) {
+ DMERR("tm_open_with_sm failed");
+ return r;
+ }
+
+ disk_super = dm_block_data(sblock);
+ data_sm = dm_sm_disk_open(tm, disk_super->data_space_map_root,
+ sizeof(disk_super->data_space_map_root));
+ if (IS_ERR(data_sm)) {
+ DMERR("sm_disk_open failed");
+ r = PTR_ERR(data_sm);
+ goto bad;
+ }
+ }
+
+
+ r = dm_tm_unlock(tm, sblock);
+ if (r < 0) {
+ DMERR("couldn't unlock superblock");
+ goto bad_data_sm;
+ }
+
+ pmd->bm = bm;
+ pmd->metadata_sm = sm;
+ pmd->data_sm = data_sm;
+ pmd->tm = tm;
+ pmd->nb_tm = dm_tm_create_non_blocking_clone(tm);
+ if (!pmd->nb_tm) {
+ DMERR("could not create clone tm");
+ r = -ENOMEM;
+ goto bad_data_sm;
+ }
+
+ pmd->info.tm = tm;
+ pmd->info.levels = 2;
+ pmd->info.value_type.context = pmd->data_sm;
+ pmd->info.value_type.size = sizeof(__le64);
+ pmd->info.value_type.inc = data_block_inc;
+ pmd->info.value_type.dec = data_block_dec;
+ pmd->info.value_type.equal = data_block_equal;
+
+ memcpy(&pmd->nb_info, &pmd->info, sizeof(pmd->nb_info));
+ pmd->nb_info.tm = pmd->nb_tm;
+
+ pmd->tl_info.tm = tm;
+ pmd->tl_info.levels = 1;
+ pmd->tl_info.value_type.context = &pmd->info;
+ pmd->tl_info.value_type.size = sizeof(__le64);
+ pmd->tl_info.value_type.inc = subtree_inc;
+ pmd->tl_info.value_type.dec = subtree_dec;
+ pmd->tl_info.value_type.equal = subtree_equal;
+
+ pmd->bl_info.tm = tm;
+ pmd->bl_info.levels = 1;
+ pmd->bl_info.value_type.context = pmd->data_sm;
+ pmd->bl_info.value_type.size = sizeof(__le64);
+ pmd->bl_info.value_type.inc = data_block_inc;
+ pmd->bl_info.value_type.dec = data_block_dec;
+ pmd->bl_info.value_type.equal = data_block_equal;
+
+ pmd->details_info.tm = tm;
+ pmd->details_info.levels = 1;
+ pmd->details_info.value_type.context = NULL;
+ pmd->details_info.value_type.size = sizeof(struct disk_device_details);
+ pmd->details_info.value_type.inc = NULL;
+ pmd->details_info.value_type.dec = NULL;
+ pmd->details_info.value_type.equal = NULL;
+
+ pmd->root = 0;
+
+ init_rwsem(&pmd->root_lock);
+ pmd->time = 0;
+ pmd->need_commit = 0;
+ pmd->details_root = 0;
+ pmd->trans_id = 0;
+ pmd->flags = 0;
+ INIT_LIST_HEAD(&pmd->thin_devices);
+
+ return 0;
+
+bad_data_sm:
+ dm_sm_destroy(data_sm);
+bad:
+ dm_tm_destroy(tm);
+ dm_sm_destroy(sm);
+
+ return r;
+}
+
+static int __begin_transaction(struct dm_pool_metadata *pmd)
+{
+ int r;
+ u32 features;
+ struct thin_disk_superblock *disk_super;
+ struct dm_block *sblock;
+
+ /*
+ * __maybe_commit_transaction() resets these
+ */
+ WARN_ON(pmd->need_commit);
+
+ /*
+ * We re-read the superblock every time. Shouldn't need to do this
+ * really.
+ */
+ r = dm_bm_read_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ return r;
+
+ disk_super = dm_block_data(sblock);
+ pmd->time = le32_to_cpu(disk_super->time);
+ pmd->root = le64_to_cpu(disk_super->data_mapping_root);
+ pmd->details_root = le64_to_cpu(disk_super->device_details_root);
+ pmd->trans_id = le64_to_cpu(disk_super->trans_id);
+ pmd->flags = le32_to_cpu(disk_super->flags);
+ pmd->data_block_size = le32_to_cpu(disk_super->data_block_size);
+
+ features = le32_to_cpu(disk_super->incompat_flags) & ~THIN_FEATURE_INCOMPAT_SUPP;
+ if (features) {
+ DMERR("could not access metadata due to "
+ "unsupported optional features (%lx).",
+ (unsigned long)features);
+ r = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * Check for read-only metadata to skip the following RDWR checks.
+ */
+ if (get_disk_ro(pmd->bdev->bd_disk))
+ goto out;
+
+ features = le32_to_cpu(disk_super->compat_ro_flags) & ~THIN_FEATURE_COMPAT_RO_SUPP;
+ if (features) {
+ DMERR("could not access metadata RDWR due to "
+ "unsupported optional features (%lx).",
+ (unsigned long)features);
+ r = -EINVAL;
+ }
+
+out:
+ dm_bm_unlock(sblock);
+ return r;
+}
+
+static int __write_changed_details(struct dm_pool_metadata *pmd)
+{
+ int r;
+ struct dm_thin_device *td, *tmp;
+ struct disk_device_details details;
+ uint64_t key;
+
+ list_for_each_entry_safe(td, tmp, &pmd->thin_devices, list) {
+ if (!td->changed)
+ continue;
+
+ key = td->id;
+
+ details.mapped_blocks = cpu_to_le64(td->mapped_blocks);
+ details.transaction_id = cpu_to_le64(td->transaction_id);
+ details.creation_time = cpu_to_le32(td->creation_time);
+ details.snapshotted_time = cpu_to_le32(td->snapshotted_time);
+ __dm_bless_for_disk(&details);
+
+ r = dm_btree_insert(&pmd->details_info, pmd->details_root,
+ &key, &details, &pmd->details_root);
+ if (r)
+ return r;
+
+ if (td->open_count)
+ td->changed = 0;
+ else {
+ list_del(&td->list);
+ kfree(td);
+ }
+
+ pmd->need_commit = 1;
+ }
+
+ return 0;
+}
+
+static int __commit_transaction(struct dm_pool_metadata *pmd)
+{
+ /*
+ * FIXME: Associated pool should be made read-only on failure.
+ */
+ int r;
+ size_t metadata_len, data_len;
+ struct thin_disk_superblock *disk_super;
+ struct dm_block *sblock;
+
+ /*
+ * We need to know if the thin_disk_superblock exceeds a 512-byte sector.
+ */
+ BUILD_BUG_ON(sizeof(struct thin_disk_superblock) > 512);
+
+ r = __write_changed_details(pmd);
+ if (r < 0)
+ goto out;
+
+ if (!pmd->need_commit)
+ goto out;
+
+ r = dm_sm_commit(pmd->data_sm);
+ if (r < 0)
+ goto out;
+
+ r = dm_tm_pre_commit(pmd->tm);
+ if (r < 0)
+ goto out;
+
+ r = dm_sm_root_size(pmd->metadata_sm, &metadata_len);
+ if (r < 0)
+ goto out;
+
+ r = dm_sm_root_size(pmd->metadata_sm, &data_len);
+ if (r < 0)
+ goto out;
+
+ r = dm_bm_write_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ goto out;
+
+ disk_super = dm_block_data(sblock);
+ disk_super->time = cpu_to_le32(pmd->time);
+ disk_super->data_mapping_root = cpu_to_le64(pmd->root);
+ disk_super->device_details_root = cpu_to_le64(pmd->details_root);
+ disk_super->trans_id = cpu_to_le64(pmd->trans_id);
+ disk_super->flags = cpu_to_le32(pmd->flags);
+
+ r = dm_sm_copy_root(pmd->metadata_sm, &disk_super->metadata_space_map_root,
+ metadata_len);
+ if (r < 0)
+ goto out_locked;
+
+ r = dm_sm_copy_root(pmd->data_sm, &disk_super->data_space_map_root,
+ data_len);
+ if (r < 0)
+ goto out_locked;
+
+ r = dm_tm_commit(pmd->tm, sblock);
+ if (!r)
+ pmd->need_commit = 0;
+
+out:
+ return r;
+
+out_locked:
+ dm_bm_unlock(sblock);
+ return r;
+}
+
+struct dm_pool_metadata *dm_pool_metadata_open(struct block_device *bdev,
+ sector_t data_block_size)
+{
+ int r;
+ struct thin_disk_superblock *disk_super;
+ struct dm_pool_metadata *pmd;
+ sector_t bdev_size = i_size_read(bdev->bd_inode) >> SECTOR_SHIFT;
+ struct dm_block_manager *bm;
+ int create;
+ struct dm_block *sblock;
+
+ pmd = kmalloc(sizeof(*pmd), GFP_KERNEL);
+ if (!pmd) {
+ DMERR("could not allocate metadata struct");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /*
+ * Max hex locks:
+ * 3 for btree insert +
+ * 2 for btree lookup used within space map
+ */
+ bm = dm_block_manager_create(bdev, THIN_METADATA_BLOCK_SIZE,
+ THIN_METADATA_CACHE_SIZE, 5);
+ if (!bm) {
+ DMERR("could not create block manager");
+ kfree(pmd);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ r = superblock_all_zeroes(bm, &create);
+ if (r) {
+ dm_block_manager_destroy(bm);
+ kfree(pmd);
+ return ERR_PTR(r);
+ }
+
+
+ r = init_pmd(pmd, bm, 0, create);
+ if (r) {
+ dm_block_manager_destroy(bm);
+ kfree(pmd);
+ return ERR_PTR(r);
+ }
+ pmd->bdev = bdev;
+
+ if (!create) {
+ r = __begin_transaction(pmd);
+ if (r < 0)
+ goto bad;
+ return pmd;
+ }
+
+ /*
+ * Create.
+ */
+ r = dm_bm_write_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ goto bad;
+
+ disk_super = dm_block_data(sblock);
+ disk_super->magic = cpu_to_le64(THIN_SUPERBLOCK_MAGIC);
+ disk_super->version = cpu_to_le32(THIN_VERSION);
+ disk_super->time = 0;
+ disk_super->metadata_block_size = cpu_to_le32(THIN_METADATA_BLOCK_SIZE >> SECTOR_SHIFT);
+ disk_super->metadata_nr_blocks = cpu_to_le64(bdev_size >> SECTOR_TO_BLOCK_SHIFT);
+ disk_super->data_block_size = cpu_to_le32(data_block_size);
+
+ r = dm_bm_unlock(sblock);
+ if (r < 0)
+ goto bad;
+
+ r = dm_btree_empty(&pmd->info, &pmd->root);
+ if (r < 0)
+ goto bad;
+
+ r = dm_btree_empty(&pmd->details_info, &pmd->details_root);
+ if (r < 0) {
+ DMERR("couldn't create devices root");
+ goto bad;
+ }
+
+ pmd->flags = 0;
+ pmd->need_commit = 1;
+ r = dm_pool_commit_metadata(pmd);
+ if (r < 0) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ goto bad;
+ }
+
+ return pmd;
+
+bad:
+ if (dm_pool_metadata_close(pmd) < 0)
+ DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
+ return ERR_PTR(r);
+}
+
+int dm_pool_metadata_close(struct dm_pool_metadata *pmd)
+{
+ int r;
+ unsigned open_devices = 0;
+ struct dm_thin_device *td, *tmp;
+
+ down_read(&pmd->root_lock);
+ list_for_each_entry_safe(td, tmp, &pmd->thin_devices, list) {
+ if (td->open_count)
+ open_devices++;
+ else {
+ list_del(&td->list);
+ kfree(td);
+ }
+ }
+ up_read(&pmd->root_lock);
+
+ if (open_devices) {
+ DMERR("attempt to close pmd when %u device(s) are still open",
+ open_devices);
+ return -EBUSY;
+ }
+
+ r = __commit_transaction(pmd);
+ if (r < 0)
+ DMWARN("%s: __commit_transaction() failed, error = %d",
+ __func__, r);
+
+ dm_tm_destroy(pmd->tm);
+ dm_tm_destroy(pmd->nb_tm);
+ dm_block_manager_destroy(pmd->bm);
+ dm_sm_destroy(pmd->metadata_sm);
+ dm_sm_destroy(pmd->data_sm);
+ kfree(pmd);
+
+ return 0;
+}
+
+static int __open_device(struct dm_pool_metadata *pmd,
+ dm_thin_id dev, int create,
+ struct dm_thin_device **td)
+{
+ int r, changed = 0;
+ struct dm_thin_device *td2;
+ uint64_t key = dev;
+ struct disk_device_details details_le;
+
+ /*
+ * Check the device isn't already open.
+ */
+ list_for_each_entry(td2, &pmd->thin_devices, list)
+ if (td2->id == dev) {
+ td2->open_count++;
+ *td = td2;
+ return 0;
+ }
+
+ /*
+ * Check the device exists.
+ */
+ r = dm_btree_lookup(&pmd->details_info, pmd->details_root,
+ &key, &details_le);
+ if (r) {
+ if (r != -ENODATA || !create)
+ return r;
+
+ changed = 1;
+ details_le.mapped_blocks = 0;
+ details_le.transaction_id = cpu_to_le64(pmd->trans_id);
+ details_le.creation_time = cpu_to_le32(pmd->time);
+ details_le.snapshotted_time = cpu_to_le32(pmd->time);
+ }
+
+ *td = kmalloc(sizeof(**td), GFP_NOIO);
+ if (!*td)
+ return -ENOMEM;
+
+ (*td)->pmd = pmd;
+ (*td)->id = dev;
+ (*td)->open_count = 1;
+ (*td)->changed = changed;
+ (*td)->mapped_blocks = le64_to_cpu(details_le.mapped_blocks);
+ (*td)->transaction_id = le64_to_cpu(details_le.transaction_id);
+ (*td)->creation_time = le32_to_cpu(details_le.creation_time);
+ (*td)->snapshotted_time = le32_to_cpu(details_le.snapshotted_time);
+
+ list_add(&(*td)->list, &pmd->thin_devices);
+
+ return 0;
+}
+
+static void __close_device(struct dm_thin_device *td)
+{
+ --td->open_count;
+}
+
+static int __create_thin(struct dm_pool_metadata *pmd,
+ dm_thin_id dev)
+{
+ int r;
+ dm_block_t dev_root;
+ uint64_t key = dev;
+ struct disk_device_details details_le;
+ struct dm_thin_device *td;
+ __le64 value;
+
+ r = dm_btree_lookup(&pmd->details_info, pmd->details_root,
+ &key, &details_le);
+ if (!r)
+ return -EEXIST;
+
+ /*
+ * Create an empty btree for the mappings.
+ */
+ r = dm_btree_empty(&pmd->bl_info, &dev_root);
+ if (r)
+ return r;
+
+ /*
+ * Insert it into the main mapping tree.
+ */
+ value = cpu_to_le64(dev_root);
+ __dm_bless_for_disk(&value);
+ r = dm_btree_insert(&pmd->tl_info, pmd->root, &key, &value, &pmd->root);
+ if (r) {
+ dm_btree_del(&pmd->bl_info, dev_root);
+ return r;
+ }
+
+ r = __open_device(pmd, dev, 1, &td);
+ if (r) {
+ __close_device(td);
+ dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
+ dm_btree_del(&pmd->bl_info, dev_root);
+ return r;
+ }
+ td->changed = 1;
+ __close_device(td);
+
+ return r;
+}
+
+int dm_pool_create_thin(struct dm_pool_metadata *pmd, dm_thin_id dev)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __create_thin(pmd, dev);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+static int __set_snapshot_details(struct dm_pool_metadata *pmd,
+ struct dm_thin_device *snap,
+ dm_thin_id origin, uint32_t time)
+{
+ int r;
+ struct dm_thin_device *td;
+
+ r = __open_device(pmd, origin, 0, &td);
+ if (r)
+ return r;
+
+ td->changed = 1;
+ td->snapshotted_time = time;
+
+ snap->mapped_blocks = td->mapped_blocks;
+ snap->snapshotted_time = time;
+ __close_device(td);
+
+ return 0;
+}
+
+static int __create_snap(struct dm_pool_metadata *pmd,
+ dm_thin_id dev, dm_thin_id origin)
+{
+ int r;
+ dm_block_t origin_root;
+ uint64_t key = origin, dev_key = dev;
+ struct dm_thin_device *td;
+ struct disk_device_details details_le;
+ __le64 value;
+
+ /* check this device is unused */
+ r = dm_btree_lookup(&pmd->details_info, pmd->details_root,
+ &dev_key, &details_le);
+ if (!r)
+ return -EEXIST;
+
+ /* find the mapping tree for the origin */
+ r = dm_btree_lookup(&pmd->tl_info, pmd->root, &key, &value);
+ if (r)
+ return r;
+ origin_root = le64_to_cpu(value);
+
+ /* clone the origin, an inc will do */
+ dm_tm_inc(pmd->tm, origin_root);
+
+ /* insert into the main mapping tree */
+ value = cpu_to_le64(origin_root);
+ __dm_bless_for_disk(&value);
+ key = dev;
+ r = dm_btree_insert(&pmd->tl_info, pmd->root, &key, &value, &pmd->root);
+ if (r) {
+ dm_tm_dec(pmd->tm, origin_root);
+ return r;
+ }
+
+ pmd->time++;
+
+ r = __open_device(pmd, dev, 1, &td);
+ if (r)
+ goto bad;
+
+ r = __set_snapshot_details(pmd, td, origin, pmd->time);
+ if (r)
+ goto bad;
+
+ __close_device(td);
+ return 0;
+
+bad:
+ __close_device(td);
+ dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
+ dm_btree_remove(&pmd->details_info, pmd->details_root,
+ &key, &pmd->details_root);
+ return r;
+}
+
+int dm_pool_create_snap(struct dm_pool_metadata *pmd,
+ dm_thin_id dev,
+ dm_thin_id origin)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __create_snap(pmd, dev, origin);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+static int __delete_device(struct dm_pool_metadata *pmd, dm_thin_id dev)
+{
+ int r;
+ uint64_t key = dev;
+ struct dm_thin_device *td;
+
+ /* TODO: failure should mark the transaction invalid */
+ r = __open_device(pmd, dev, 0, &td);
+ if (r)
+ return r;
+
+ if (td->open_count > 1) {
+ __close_device(td);
+ return -EBUSY;
+ }
+
+ list_del(&td->list);
+ kfree(td);
+ r = dm_btree_remove(&pmd->details_info, pmd->details_root,
+ &key, &pmd->details_root);
+ if (r)
+ return r;
+
+ r = dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
+ if (r)
+ return r;
+
+ pmd->need_commit = 1;
+
+ return 0;
+}
+
+int dm_pool_delete_thin_device(struct dm_pool_metadata *pmd,
+ dm_thin_id dev)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __delete_device(pmd, dev);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_set_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t current_id,
+ uint64_t new_id)
+{
+ down_write(&pmd->root_lock);
+ if (pmd->trans_id != current_id) {
+ up_write(&pmd->root_lock);
+ DMERR("mismatched transaction id");
+ return -EINVAL;
+ }
+
+ pmd->trans_id = new_id;
+ pmd->need_commit = 1;
+ up_write(&pmd->root_lock);
+
+ return 0;
+}
+
+int dm_pool_get_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t *result)
+{
+ down_read(&pmd->root_lock);
+ *result = pmd->trans_id;
+ up_read(&pmd->root_lock);
+
+ return 0;
+}
+
+static int __get_held_metadata_root(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+ struct thin_disk_superblock *disk_super;
+ struct dm_block *sblock;
+
+ r = dm_bm_write_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ return r;
+
+ disk_super = dm_block_data(sblock);
+ *result = le64_to_cpu(disk_super->held_root);
+
+ return dm_bm_unlock(sblock);
+}
+
+int dm_pool_get_held_metadata_root(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = __get_held_metadata_root(pmd, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_open_thin_device(struct dm_pool_metadata *pmd, dm_thin_id dev,
+ struct dm_thin_device **td)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __open_device(pmd, dev, 0, td);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_close_thin_device(struct dm_thin_device *td)
+{
+ down_write(&td->pmd->root_lock);
+ __close_device(td);
+ up_write(&td->pmd->root_lock);
+
+ return 0;
+}
+
+dm_thin_id dm_thin_dev_id(struct dm_thin_device *td)
+{
+ return td->id;
+}
+
+static int __snapshotted_since(struct dm_thin_device *td, uint32_t time)
+{
+ return td->snapshotted_time > time;
+}
+
+int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
+ int can_block, struct dm_thin_lookup_result *result)
+{
+ int r;
+ uint64_t block_time = 0;
+ __le64 value;
+ struct dm_pool_metadata *pmd = td->pmd;
+ dm_block_t keys[2] = { td->id, block };
+
+ if (can_block) {
+ down_read(&pmd->root_lock);
+ r = dm_btree_lookup(&pmd->info, pmd->root, keys, &value);
+ if (!r)
+ block_time = le64_to_cpu(value);
+ up_read(&pmd->root_lock);
+
+ } else if (down_read_trylock(&pmd->root_lock)) {
+ r = dm_btree_lookup(&pmd->nb_info, pmd->root, keys, &value);
+ if (!r)
+ block_time = le64_to_cpu(value);
+ up_read(&pmd->root_lock);
+
+ } else
+ return -EWOULDBLOCK;
+
+ if (!r) {
+ dm_block_t exception_block;
+ uint32_t exception_time;
+ unpack_block_time(block_time, &exception_block,
+ &exception_time);
+ result->block = exception_block;
+ result->shared = __snapshotted_since(td, exception_time);
+ }
+
+ return r;
+}
+
+static int __insert(struct dm_thin_device *td, dm_block_t block,
+ dm_block_t data_block)
+{
+ int r, inserted;
+ __le64 value;
+ struct dm_pool_metadata *pmd = td->pmd;
+ dm_block_t keys[2] = { td->id, block };
+
+ pmd->need_commit = 1;
+ value = cpu_to_le64(pack_block_time(data_block, pmd->time));
+ __dm_bless_for_disk(&value);
+
+ r = dm_btree_insert_notify(&pmd->info, pmd->root, keys, &value,
+ &pmd->root, &inserted);
+ if (r)
+ return r;
+
+ if (inserted) {
+ td->mapped_blocks++;
+ td->changed = 1;
+ }
+
+ return 0;
+}
+
+int dm_thin_insert_block(struct dm_thin_device *td, dm_block_t block,
+ dm_block_t data_block)
+{
+ int r;
+
+ down_write(&td->pmd->root_lock);
+ r = __insert(td, block, data_block);
+ up_write(&td->pmd->root_lock);
+
+ return r;
+}
+
+static int __remove(struct dm_thin_device *td, dm_block_t block)
+{
+ int r;
+ struct dm_pool_metadata *pmd = td->pmd;
+ dm_block_t keys[2] = { td->id, block };
+
+ r = dm_btree_remove(&pmd->info, pmd->root, keys, &pmd->root);
+ if (r)
+ return r;
+
+ pmd->need_commit = 1;
+
+ return 0;
+}
+
+int dm_thin_remove_block(struct dm_thin_device *td, dm_block_t block)
+{
+ int r;
+
+ down_write(&td->pmd->root_lock);
+ r = __remove(td, block);
+ up_write(&td->pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_alloc_data_block(struct dm_pool_metadata *pmd, dm_block_t *result)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+
+ r = dm_sm_new_block(pmd->data_sm, result);
+ pmd->need_commit = 1;
+
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_commit_metadata(struct dm_pool_metadata *pmd)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+
+ r = __commit_transaction(pmd);
+ if (r <= 0)
+ goto out;
+
+ /*
+ * Open the next transaction.
+ */
+ r = __begin_transaction(pmd);
+out:
+ up_write(&pmd->root_lock);
+ return r;
+}
+
+int dm_pool_get_free_block_count(struct dm_pool_metadata *pmd, dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_free(pmd->data_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_get_free_metadata_block_count(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_free(pmd->metadata_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_get_metadata_dev_size(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_blocks(pmd->metadata_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_get_data_block_size(struct dm_pool_metadata *pmd, sector_t *result)
+{
+ down_read(&pmd->root_lock);
+ *result = pmd->data_block_size;
+ up_read(&pmd->root_lock);
+
+ return 0;
+}
+
+int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_blocks(pmd->data_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_thin_get_mapped_count(struct dm_thin_device *td, dm_block_t *result)
+{
+ struct dm_pool_metadata *pmd = td->pmd;
+
+ down_read(&pmd->root_lock);
+ *result = td->mapped_blocks;
+ up_read(&pmd->root_lock);
+
+ return 0;
+}
+
+static int __highest_block(struct dm_thin_device *td, dm_block_t *result)
+{
+ int r;
+ __le64 value_le;
+ dm_block_t thin_root;
+ struct dm_pool_metadata *pmd = td->pmd;
+
+ r = dm_btree_lookup(&pmd->tl_info, pmd->root, &td->id, &value_le);
+ if (r)
+ return r;
+
+ thin_root = le64_to_cpu(value_le);
+
+ return dm_btree_find_highest_key(&pmd->bl_info, thin_root, result);
+}
+
+int dm_thin_get_highest_mapped_block(struct dm_thin_device *td,
+ dm_block_t *result)
+{
+ int r;
+ struct dm_pool_metadata *pmd = td->pmd;
+
+ down_read(&pmd->root_lock);
+ r = __highest_block(td, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+static int __resize_data_dev(struct dm_pool_metadata *pmd, dm_block_t new_count)
+{
+ int r;
+ dm_block_t old_count;
+
+ r = dm_sm_get_nr_blocks(pmd->data_sm, &old_count);
+ if (r)
+ return r;
+
+ if (new_count == old_count)
+ return 0;
+
+ if (new_count < old_count) {
+ DMERR("cannot reduce size of data device");
+ return -EINVAL;
+ }
+
+ r = dm_sm_extend(pmd->data_sm, new_count - old_count);
+ if (!r)
+ pmd->need_commit = 1;
+
+ return r;
+}
+
+int dm_pool_resize_data_dev(struct dm_pool_metadata *pmd, dm_block_t new_count)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __resize_data_dev(pmd, new_count);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h
new file mode 100644
index 0000000..859c168
--- /dev/null
+++ b/drivers/md/dm-thin-metadata.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2010-2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_THIN_METADATA_H
+#define DM_THIN_METADATA_H
+
+#include "persistent-data/dm-block-manager.h"
+
+#define THIN_METADATA_BLOCK_SIZE 4096
+
+/*----------------------------------------------------------------*/
+
+struct dm_pool_metadata;
+struct dm_thin_device;
+
+/*
+ * Device identifier
+ */
+typedef uint64_t dm_thin_id;
+
+/*
+ * Reopens or creates a new, empty metadata volume.
+ */
+struct dm_pool_metadata *dm_pool_metadata_open(struct block_device *bdev,
+ sector_t data_block_size);
+
+int dm_pool_metadata_close(struct dm_pool_metadata *pmd);
+
+/*
+ * Compat feature flags. Any incompat flags beyond the ones
+ * specified below will prevent use of the thin metadata.
+ */
+#define THIN_FEATURE_COMPAT_SUPP 0UL
+#define THIN_FEATURE_COMPAT_RO_SUPP 0UL
+#define THIN_FEATURE_INCOMPAT_SUPP 0UL
+
+/*
+ * Device creation/deletion.
+ */
+int dm_pool_create_thin(struct dm_pool_metadata *pmd, dm_thin_id dev);
+
+/*
+ * An internal snapshot.
+ *
+ * You can only snapshot a quiesced origin i.e. one that is either
+ * suspended or not instanced at all.
+ */
+int dm_pool_create_snap(struct dm_pool_metadata *pmd, dm_thin_id dev,
+ dm_thin_id origin);
+
+/*
+ * Deletes a virtual device from the metadata. It _is_ safe to call this
+ * when that device is open. Operations on that device will just start
+ * failing. You still need to call close() on the device.
+ */
+int dm_pool_delete_thin_device(struct dm_pool_metadata *pmd,
+ dm_thin_id dev);
+
+/*
+ * Commits _all_ metadata changes: device creation, deletion, mapping
+ * updates.
+ */
+int dm_pool_commit_metadata(struct dm_pool_metadata *pmd);
+
+/*
+ * Set/get userspace transaction id.
+ */
+int dm_pool_set_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t current_id,
+ uint64_t new_id);
+
+int dm_pool_get_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t *result);
+
+/*
+ * Hold/get root for userspace transaction.
+ */
+int dm_pool_hold_metadata_root(struct dm_pool_metadata *pmd);
+
+int dm_pool_get_held_metadata_root(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+/*
+ * Actions on a single virtual device.
+ */
+
+/*
+ * Opening the same device more than once will fail with -EBUSY.
+ */
+int dm_pool_open_thin_device(struct dm_pool_metadata *pmd, dm_thin_id dev,
+ struct dm_thin_device **td);
+
+int dm_pool_close_thin_device(struct dm_thin_device *td);
+
+dm_thin_id dm_thin_dev_id(struct dm_thin_device *td);
+
+struct dm_thin_lookup_result {
+ dm_block_t block;
+ int shared;
+};
+
+/*
+ * Returns:
+ * -EWOULDBLOCK iff @can_block is set and would block.
+ * -ENODATA iff that mapping is not present.
+ * 0 success
+ */
+int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
+ int can_block, struct dm_thin_lookup_result *result);
+
+/*
+ * Obtain an unused block.
+ */
+int dm_pool_alloc_data_block(struct dm_pool_metadata *pmd, dm_block_t *result);
+
+/*
+ * Insert or remove block.
+ */
+int dm_thin_insert_block(struct dm_thin_device *td, dm_block_t block,
+ dm_block_t data_block);
+
+int dm_thin_remove_block(struct dm_thin_device *td, dm_block_t block);
+
+/*
+ * Queries.
+ */
+int dm_thin_get_highest_mapped_block(struct dm_thin_device *td,
+ dm_block_t *highest_mapped);
+
+int dm_thin_get_mapped_count(struct dm_thin_device *td, dm_block_t *result);
+
+int dm_pool_get_free_block_count(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+int dm_pool_get_free_metadata_block_count(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+int dm_pool_get_metadata_dev_size(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+int dm_pool_get_data_block_size(struct dm_pool_metadata *pmd, sector_t *result);
+
+int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result);
+
+/*
+ * Returns -ENOSPC if the new size is too small and already allocated
+ * blocks would be lost.
+ */
+int dm_pool_resize_data_dev(struct dm_pool_metadata *pmd, dm_block_t new_size);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
new file mode 100644
index 0000000..c308757
--- /dev/null
+++ b/drivers/md/dm-thin.c
@@ -0,0 +1,2428 @@
+/*
+ * Copyright (C) 2011 Red Hat UK.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-thin-metadata.h"
+
+#include <linux/device-mapper.h>
+#include <linux/dm-io.h>
+#include <linux/dm-kcopyd.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define DM_MSG_PREFIX "thin"
+
+/*
+ * Tunable constants
+ */
+#define ENDIO_HOOK_POOL_SIZE 10240
+#define DEFERRED_SET_SIZE 64
+#define MAPPING_POOL_SIZE 1024
+#define PRISON_CELLS 1024
+
+/*
+ * The block size of the device holding pool data must be
+ * between 64KB and 1GB.
+ */
+#define DATA_DEV_BLOCK_SIZE_MIN_SECTORS (64 * 1024 >> SECTOR_SHIFT)
+#define DATA_DEV_BLOCK_SIZE_MAX_SECTORS (1024 * 1024 * 1024 >> SECTOR_SHIFT)
+
+/*
+ * The metadata device is currently limited in size. The limitation is
+ * checked lower down in dm-space-map-metadata, but we also check it here
+ * so we can fail early.
+ *
+ * We have one block of index, which can hold 255 index entries. Each
+ * index entry contains allocation info about 16k metadata blocks.
+ */
+#define METADATA_DEV_MAX_SECTORS (255 * (1 << 14) * (THIN_METADATA_BLOCK_SIZE / (1 << SECTOR_SHIFT)))
+
+/*
+ * Device id is restricted to 24 bits.
+ */
+#define MAX_DEV_ID ((1 << 24) - 1)
+
+/*
+ * How do we handle breaking sharing of data blocks?
+ * =================================================
+ *
+ * We use a standard copy-on-write btree to store the mappings for the
+ * devices (note I'm talking about copy-on-write of the metadata here, not
+ * the data). When you take an internal snapshot you clone the root node
+ * of the origin btree. After this there is no concept of an origin or a
+ * snapshot. They are just two device trees that happen to point to the
+ * same data blocks.
+ *
+ * When we get a write in we decide if it's to a shared data block using
+ * some timestamp magic. If it is, we have to break sharing.
+ *
+ * Let's say we write to a shared block in what was the origin. The
+ * steps are:
+ *
+ * i) plug io further to this physical block. (see bio_prison code).
+ *
+ * ii) quiesce any read io to that shared data block. Obviously
+ * including all devices that share this block. (see deferred_set code)
+ *
+ * iii) copy the data block to a newly allocate block. This step can be
+ * missed out if the io covers the block. (schedule_copy).
+ *
+ * iv) insert the new mapping into the origin's btree
+ * (process_prepared_mappings). This act of inserting breaks some
+ * sharing of btree nodes between the two devices. Breaking sharing only
+ * effects the btree of that specific device. Btrees for the other
+ * devices that share the block never change. The btree for the origin
+ * device as it was after the last commit is untouched, ie. we're using
+ * persistent data structures in the functional programming sense.
+ *
+ * v) unplug io to this physical block, including the io that triggered
+ * the breaking of sharing.
+ *
+ * Steps (ii) and (iii) occur in parallel.
+ *
+ * The metadata _doesn't_ need to be committed before the io continues. We
+ * get away with this because the io is always written to a _new_ block.
+ * If there's a crash, then:
+ *
+ * - The origin mapping will point to the old origin block (the shared
+ * one). This will contain the data as it was before the io that triggered
+ * the breaking of sharing came in.
+ *
+ * - The snap mapping still points to the old block. As it would after
+ * the commit.
+ *
+ * The downside of this scheme is the timestamp magic isn't perfect, and
+ * will continue to think that data block in the snapshot device is shared
+ * even after the write to the origin has broken sharing. I suspect data
+ * blocks will typically be shared by many different devices, so we're
+ * breaking sharing n + 1 times, rather than n, where n is the number of
+ * devices that reference this data block. At the moment I think the
+ * benefits far, far outweigh the disadvantages.
+ */
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Sometimes we can't deal with a bio straight away. We put them in prison
+ * where they can't cause any mischief. Bios are put in a cell identified
+ * by a key, multiple bios can be in the same cell. When the cell is
+ * subsequently unlocked the bios become available.
+ */
+struct bio_prison;
+
+struct cell_key {
+ int virtual;
+ dm_thin_id dev;
+ dm_block_t block;
+};
+
+struct cell {
+ struct hlist_node list;
+ struct bio_prison *prison;
+ struct cell_key key;
+ unsigned count;
+ struct bio_list bios;
+};
+
+struct bio_prison {
+ spinlock_t lock;
+ mempool_t *cell_pool;
+
+ unsigned nr_buckets;
+ unsigned hash_mask;
+ struct hlist_head *cells;
+};
+
+static uint32_t calc_nr_buckets(unsigned nr_cells)
+{
+ uint32_t n = 128;
+
+ nr_cells /= 4;
+ nr_cells = min(nr_cells, 8192u);
+
+ while (n < nr_cells)
+ n <<= 1;
+
+ return n;
+}
+
+/*
+ * @nr_cells should be the number of cells you want in use _concurrently_.
+ * Don't confuse it with the number of distinct keys.
+ */
+static struct bio_prison *prison_create(unsigned nr_cells)
+{
+ unsigned i;
+ uint32_t nr_buckets = calc_nr_buckets(nr_cells);
+ size_t len = sizeof(struct bio_prison) +
+ (sizeof(struct hlist_head) * nr_buckets);
+ struct bio_prison *prison = kmalloc(len, GFP_KERNEL);
+
+ if (!prison)
+ return NULL;
+
+ spin_lock_init(&prison->lock);
+ prison->cell_pool = mempool_create_kmalloc_pool(nr_cells,
+ sizeof(struct cell));
+ if (!prison->cell_pool) {
+ kfree(prison);
+ return NULL;
+ }
+
+ prison->nr_buckets = nr_buckets;
+ prison->hash_mask = nr_buckets - 1;
+ prison->cells = (struct hlist_head *) (prison + 1);
+ for (i = 0; i < nr_buckets; i++)
+ INIT_HLIST_HEAD(prison->cells + i);
+
+ return prison;
+}
+
+static void prison_destroy(struct bio_prison *prison)
+{
+ mempool_destroy(prison->cell_pool);
+ kfree(prison);
+}
+
+static uint32_t hash_key(struct bio_prison *prison, struct cell_key *key)
+{
+ const unsigned long BIG_PRIME = 4294967291UL;
+ uint64_t hash = key->block * BIG_PRIME;
+
+ return (uint32_t) (hash & prison->hash_mask);
+}
+
+static int keys_equal(struct cell_key *lhs, struct cell_key *rhs)
+{
+ return (lhs->virtual == rhs->virtual) &&
+ (lhs->dev == rhs->dev) &&
+ (lhs->block == rhs->block);
+}
+
+static struct cell *__search_bucket(struct hlist_head *bucket,
+ struct cell_key *key)
+{
+ struct cell *cell;
+ struct hlist_node *tmp;
+
+ hlist_for_each_entry(cell, tmp, bucket, list)
+ if (keys_equal(&cell->key, key))
+ return cell;
+
+ return NULL;
+}
+
+/*
+ * This may block if a new cell needs allocating. You must ensure that
+ * cells will be unlocked even if the calling thread is blocked.
+ *
+ * Returns the number of entries in the cell prior to the new addition
+ * or < 0 on failure.
+ */
+static int bio_detain(struct bio_prison *prison, struct cell_key *key,
+ struct bio *inmate, struct cell **ref)
+{
+ int r;
+ unsigned long flags;
+ uint32_t hash = hash_key(prison, key);
+ struct cell *uninitialized_var(cell), *cell2 = NULL;
+
+ BUG_ON(hash > prison->nr_buckets);
+
+ spin_lock_irqsave(&prison->lock, flags);
+ cell = __search_bucket(prison->cells + hash, key);
+
+ if (!cell) {
+ /*
+ * Allocate a new cell
+ */
+ spin_unlock_irqrestore(&prison->lock, flags);
+ cell2 = mempool_alloc(prison->cell_pool, GFP_NOIO);
+ spin_lock_irqsave(&prison->lock, flags);
+
+ /*
+ * We've been unlocked, so we have to double check that
+ * nobody else has inserted this cell in the meantime.
+ */
+ cell = __search_bucket(prison->cells + hash, key);
+
+ if (!cell) {
+ cell = cell2;
+ cell2 = NULL;
+
+ cell->prison = prison;
+ memcpy(&cell->key, key, sizeof(cell->key));
+ cell->count = 0;
+ bio_list_init(&cell->bios);
+ hlist_add_head(&cell->list, prison->cells + hash);
+ }
+ }
+
+ r = cell->count++;
+ bio_list_add(&cell->bios, inmate);
+ spin_unlock_irqrestore(&prison->lock, flags);
+
+ if (cell2)
+ mempool_free(cell2, prison->cell_pool);
+
+ *ref = cell;
+
+ return r;
+}
+
+/*
+ * @inmates must have been initialised prior to this call
+ */
+static void __cell_release(struct cell *cell, struct bio_list *inmates)
+{
+ struct bio_prison *prison = cell->prison;
+
+ hlist_del(&cell->list);
+
+ if (inmates)
+ bio_list_merge(inmates, &cell->bios);
+
+ mempool_free(cell, prison->cell_pool);
+}
+
+static void cell_release(struct cell *cell, struct bio_list *bios)
+{
+ unsigned long flags;
+ struct bio_prison *prison = cell->prison;
+
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(cell, bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
+}
+
+/*
+ * There are a couple of places where we put a bio into a cell briefly
+ * before taking it out again. In these situations we know that no other
+ * bio may be in the cell. This function releases the cell, and also does
+ * a sanity check.
+ */
+static void cell_release_singleton(struct cell *cell, struct bio *bio)
+{
+ struct bio_prison *prison = cell->prison;
+ struct bio_list bios;
+ struct bio *b;
+ unsigned long flags;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(cell, &bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
+
+ b = bio_list_pop(&bios);
+ BUG_ON(b != bio);
+ BUG_ON(!bio_list_empty(&bios));
+}
+
+static void cell_error(struct cell *cell)
+{
+ struct bio_prison *prison = cell->prison;
+ struct bio_list bios;
+ struct bio *bio;
+ unsigned long flags;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(cell, &bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
+
+ while ((bio = bio_list_pop(&bios)))
+ bio_io_error(bio);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * We use the deferred set to keep track of pending reads to shared blocks.
+ * We do this to ensure the new mapping caused by a write isn't performed
+ * until these prior reads have completed. Otherwise the insertion of the
+ * new mapping could free the old block that the read bios are mapped to.
+ */
+
+struct deferred_set;
+struct deferred_entry {
+ struct deferred_set *ds;
+ unsigned count;
+ struct list_head work_items;
+};
+
+struct deferred_set {
+ spinlock_t lock;
+ unsigned current_entry;
+ unsigned sweeper;
+ struct deferred_entry entries[DEFERRED_SET_SIZE];
+};
+
+static void ds_init(struct deferred_set *ds)
+{
+ int i;
+
+ spin_lock_init(&ds->lock);
+ ds->current_entry = 0;
+ ds->sweeper = 0;
+ for (i = 0; i < DEFERRED_SET_SIZE; i++) {
+ ds->entries[i].ds = ds;
+ ds->entries[i].count = 0;
+ INIT_LIST_HEAD(&ds->entries[i].work_items);
+ }
+}
+
+static struct deferred_entry *ds_inc(struct deferred_set *ds)
+{
+ unsigned long flags;
+ struct deferred_entry *entry;
+
+ spin_lock_irqsave(&ds->lock, flags);
+ entry = ds->entries + ds->current_entry;
+ entry->count++;
+ spin_unlock_irqrestore(&ds->lock, flags);
+
+ return entry;
+}
+
+static unsigned ds_next(unsigned index)
+{
+ return (index + 1) % DEFERRED_SET_SIZE;
+}
+
+static void __sweep(struct deferred_set *ds, struct list_head *head)
+{
+ while ((ds->sweeper != ds->current_entry) &&
+ !ds->entries[ds->sweeper].count) {
+ list_splice_init(&ds->entries[ds->sweeper].work_items, head);
+ ds->sweeper = ds_next(ds->sweeper);
+ }
+
+ if ((ds->sweeper == ds->current_entry) && !ds->entries[ds->sweeper].count)
+ list_splice_init(&ds->entries[ds->sweeper].work_items, head);
+}
+
+static void ds_dec(struct deferred_entry *entry, struct list_head *head)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&entry->ds->lock, flags);
+ BUG_ON(!entry->count);
+ --entry->count;
+ __sweep(entry->ds, head);
+ spin_unlock_irqrestore(&entry->ds->lock, flags);
+}
+
+/*
+ * Returns 1 if deferred or 0 if no pending items to delay job.
+ */
+static int ds_add_work(struct deferred_set *ds, struct list_head *work)
+{
+ int r = 1;
+ unsigned long flags;
+ unsigned next_entry;
+
+ spin_lock_irqsave(&ds->lock, flags);
+ if ((ds->sweeper == ds->current_entry) &&
+ !ds->entries[ds->current_entry].count)
+ r = 0;
+ else {
+ list_add(work, &ds->entries[ds->current_entry].work_items);
+ next_entry = ds_next(ds->current_entry);
+ if (!ds->entries[next_entry].count)
+ ds->current_entry = next_entry;
+ }
+ spin_unlock_irqrestore(&ds->lock, flags);
+
+ return r;
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Key building.
+ */
+static void build_data_key(struct dm_thin_device *td,
+ dm_block_t b, struct cell_key *key)
+{
+ key->virtual = 0;
+ key->dev = dm_thin_dev_id(td);
+ key->block = b;
+}
+
+static void build_virtual_key(struct dm_thin_device *td, dm_block_t b,
+ struct cell_key *key)
+{
+ key->virtual = 1;
+ key->dev = dm_thin_dev_id(td);
+ key->block = b;
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * A pool device ties together a metadata device and a data device. It
+ * also provides the interface for creating and destroying internal
+ * devices.
+ */
+struct new_mapping;
+struct pool {
+ struct list_head list;
+ struct dm_target *ti; /* Only set if a pool target is bound */
+
+ struct mapped_device *pool_md;
+ struct block_device *md_dev;
+ struct dm_pool_metadata *pmd;
+
+ uint32_t sectors_per_block;
+ unsigned block_shift;
+ dm_block_t offset_mask;
+ dm_block_t low_water_blocks;
+
+ unsigned zero_new_blocks:1;
+ unsigned low_water_triggered:1; /* A dm event has been sent */
+ unsigned no_free_space:1; /* A -ENOSPC warning has been issued */
+
+ struct bio_prison *prison;
+ struct dm_kcopyd_client *copier;
+
+ struct workqueue_struct *wq;
+ struct work_struct worker;
+
+ unsigned ref_count;
+
+ spinlock_t lock;
+ struct bio_list deferred_bios;
+ struct bio_list deferred_flush_bios;
+ struct list_head prepared_mappings;
+
+ struct bio_list retry_on_resume_list;
+
+ struct deferred_set ds; /* FIXME: move to thin_c */
+
+ struct new_mapping *next_mapping;
+ mempool_t *mapping_pool;
+ mempool_t *endio_hook_pool;
+};
+
+/*
+ * Target context for a pool.
+ */
+struct pool_c {
+ struct dm_target *ti;
+ struct pool *pool;
+ struct dm_dev *data_dev;
+ struct dm_dev *metadata_dev;
+ struct dm_target_callbacks callbacks;
+
+ dm_block_t low_water_blocks;
+ unsigned zero_new_blocks:1;
+};
+
+/*
+ * Target context for a thin.
+ */
+struct thin_c {
+ struct dm_dev *pool_dev;
+ dm_thin_id dev_id;
+
+ struct pool *pool;
+ struct dm_thin_device *td;
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * A global list of pools that uses a struct mapped_device as a key.
+ */
+static struct dm_thin_pool_table {
+ struct mutex mutex;
+ struct list_head pools;
+} dm_thin_pool_table;
+
+static void pool_table_init(void)
+{
+ mutex_init(&dm_thin_pool_table.mutex);
+ INIT_LIST_HEAD(&dm_thin_pool_table.pools);
+}
+
+static void __pool_table_insert(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ list_add(&pool->list, &dm_thin_pool_table.pools);
+}
+
+static void __pool_table_remove(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ list_del(&pool->list);
+}
+
+static struct pool *__pool_table_lookup(struct mapped_device *md)
+{
+ struct pool *pool = NULL, *tmp;
+
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+
+ list_for_each_entry(tmp, &dm_thin_pool_table.pools, list) {
+ if (tmp->pool_md == md) {
+ pool = tmp;
+ break;
+ }
+ }
+
+ return pool;
+}
+
+static struct pool *__pool_table_lookup_metadata_dev(struct block_device *md_dev)
+{
+ struct pool *pool = NULL, *tmp;
+
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+
+ list_for_each_entry(tmp, &dm_thin_pool_table.pools, list) {
+ if (tmp->md_dev == md_dev) {
+ pool = tmp;
+ break;
+ }
+ }
+
+ return pool;
+}
+
+/*----------------------------------------------------------------*/
+
+static void __requeue_bio_list(struct thin_c *tc, struct bio_list *master)
+{
+ struct bio *bio;
+ struct bio_list bios;
+
+ bio_list_init(&bios);
+ bio_list_merge(&bios, master);
+ bio_list_init(master);
+
+ while ((bio = bio_list_pop(&bios))) {
+ if (dm_get_mapinfo(bio)->ptr == tc)
+ bio_endio(bio, DM_ENDIO_REQUEUE);
+ else
+ bio_list_add(master, bio);
+ }
+}
+
+static void requeue_io(struct thin_c *tc)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ __requeue_bio_list(tc, &pool->deferred_bios);
+ __requeue_bio_list(tc, &pool->retry_on_resume_list);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+/*
+ * This section of code contains the logic for processing a thin device's IO.
+ * Much of the code depends on pool object resources (lists, workqueues, etc)
+ * but most is exclusively called from the thin target rather than the thin-pool
+ * target.
+ */
+
+static dm_block_t get_bio_block(struct thin_c *tc, struct bio *bio)
+{
+ return bio->bi_sector >> tc->pool->block_shift;
+}
+
+static void remap(struct thin_c *tc, struct bio *bio, dm_block_t block)
+{
+ struct pool *pool = tc->pool;
+
+ bio->bi_bdev = tc->pool_dev->bdev;
+ bio->bi_sector = (block << pool->block_shift) +
+ (bio->bi_sector & pool->offset_mask);
+}
+
+static void remap_and_issue(struct thin_c *tc, struct bio *bio,
+ dm_block_t block)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ remap(tc, bio, block);
+
+ /*
+ * Batch together any FUA/FLUSH bios we find and then issue
+ * a single commit for them in process_deferred_bios().
+ */
+ if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_add(&pool->deferred_flush_bios, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+ } else
+ generic_make_request(bio);
+}
+
+/*
+ * wake_worker() is used when new work is queued and when pool_resume is
+ * ready to continue deferred IO processing.
+ */
+static void wake_worker(struct pool *pool)
+{
+ queue_work(pool->wq, &pool->worker);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Bio endio functions.
+ */
+struct endio_hook {
+ struct thin_c *tc;
+ bio_end_io_t *saved_bi_end_io;
+ struct deferred_entry *entry;
+};
+
+struct new_mapping {
+ struct list_head list;
+
+ int prepared;
+
+ struct thin_c *tc;
+ dm_block_t virt_block;
+ dm_block_t data_block;
+ struct cell *cell;
+ int err;
+
+ /*
+ * If the bio covers the whole area of a block then we can avoid
+ * zeroing or copying. Instead this bio is hooked. The bio will
+ * still be in the cell, so care has to be taken to avoid issuing
+ * the bio twice.
+ */
+ struct bio *bio;
+ bio_end_io_t *saved_bi_end_io;
+};
+
+static void __maybe_add_mapping(struct new_mapping *m)
+{
+ struct pool *pool = m->tc->pool;
+
+ if (list_empty(&m->list) && m->prepared) {
+ list_add(&m->list, &pool->prepared_mappings);
+ wake_worker(pool);
+ }
+}
+
+static void copy_complete(int read_err, unsigned long write_err, void *context)
+{
+ unsigned long flags;
+ struct new_mapping *m = context;
+ struct pool *pool = m->tc->pool;
+
+ m->err = read_err || write_err ? -EIO : 0;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ m->prepared = 1;
+ __maybe_add_mapping(m);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+static void overwrite_endio(struct bio *bio, int err)
+{
+ unsigned long flags;
+ struct new_mapping *m = dm_get_mapinfo(bio)->ptr;
+ struct pool *pool = m->tc->pool;
+
+ m->err = err;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ m->prepared = 1;
+ __maybe_add_mapping(m);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+static void shared_read_endio(struct bio *bio, int err)
+{
+ struct list_head mappings;
+ struct new_mapping *m, *tmp;
+ struct endio_hook *h = dm_get_mapinfo(bio)->ptr;
+ unsigned long flags;
+ struct pool *pool = h->tc->pool;
+
+ bio->bi_end_io = h->saved_bi_end_io;
+ bio_endio(bio, err);
+
+ INIT_LIST_HEAD(&mappings);
+ ds_dec(h->entry, &mappings);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ list_for_each_entry_safe(m, tmp, &mappings, list) {
+ list_del(&m->list);
+ INIT_LIST_HEAD(&m->list);
+ __maybe_add_mapping(m);
+ }
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ mempool_free(h, pool->endio_hook_pool);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Workqueue.
+ */
+
+/*
+ * Prepared mapping jobs.
+ */
+
+/*
+ * This sends the bios in the cell back to the deferred_bios list.
+ */
+static void cell_defer(struct thin_c *tc, struct cell *cell,
+ dm_block_t data_block)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ cell_release(cell, &pool->deferred_bios);
+ spin_unlock_irqrestore(&tc->pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+/*
+ * Same as cell_defer above, except it omits one particular detainee,
+ * a write bio that covers the block and has already been processed.
+ */
+static void cell_defer_except(struct thin_c *tc, struct cell *cell,
+ struct bio *exception)
+{
+ struct bio_list bios;
+ struct bio *bio;
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ bio_list_init(&bios);
+ cell_release(cell, &bios);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ while ((bio = bio_list_pop(&bios)))
+ if (bio != exception)
+ bio_list_add(&pool->deferred_bios, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+static void process_prepared_mapping(struct new_mapping *m)
+{
+ struct thin_c *tc = m->tc;
+ struct bio *bio;
+ int r;
+
+ bio = m->bio;
+ if (bio)
+ bio->bi_end_io = m->saved_bi_end_io;
+
+ if (m->err) {
+ cell_error(m->cell);
+ return;
+ }
+
+ /*
+ * Commit the prepared block into the mapping btree.
+ * Any I/O for this block arriving after this point will get
+ * remapped to it directly.
+ */
+ r = dm_thin_insert_block(tc->td, m->virt_block, m->data_block);
+ if (r) {
+ DMERR("dm_thin_insert_block() failed");
+ cell_error(m->cell);
+ return;
+ }
+
+ /*
+ * Release any bios held while the block was being provisioned.
+ * If we are processing a write bio that completely covers the block,
+ * we already processed it so can ignore it now when processing
+ * the bios in the cell.
+ */
+ if (bio) {
+ cell_defer_except(tc, m->cell, bio);
+ bio_endio(bio, 0);
+ } else
+ cell_defer(tc, m->cell, m->data_block);
+
+ list_del(&m->list);
+ mempool_free(m, tc->pool->mapping_pool);
+}
+
+static void process_prepared_mappings(struct pool *pool)
+{
+ unsigned long flags;
+ struct list_head maps;
+ struct new_mapping *m, *tmp;
+
+ INIT_LIST_HEAD(&maps);
+ spin_lock_irqsave(&pool->lock, flags);
+ list_splice_init(&pool->prepared_mappings, &maps);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ list_for_each_entry_safe(m, tmp, &maps, list)
+ process_prepared_mapping(m);
+}
+
+/*
+ * Deferred bio jobs.
+ */
+static int io_overwrites_block(struct pool *pool, struct bio *bio)
+{
+ return ((bio_data_dir(bio) == WRITE) &&
+ !(bio->bi_sector & pool->offset_mask)) &&
+ (bio->bi_size == (pool->sectors_per_block << SECTOR_SHIFT));
+}
+
+static void save_and_set_endio(struct bio *bio, bio_end_io_t **save,
+ bio_end_io_t *fn)
+{
+ *save = bio->bi_end_io;
+ bio->bi_end_io = fn;
+}
+
+static int ensure_next_mapping(struct pool *pool)
+{
+ if (pool->next_mapping)
+ return 0;
+
+ pool->next_mapping = mempool_alloc(pool->mapping_pool, GFP_ATOMIC);
+
+ return pool->next_mapping ? 0 : -ENOMEM;
+}
+
+static struct new_mapping *get_next_mapping(struct pool *pool)
+{
+ struct new_mapping *r = pool->next_mapping;
+
+ BUG_ON(!pool->next_mapping);
+
+ pool->next_mapping = NULL;
+
+ return r;
+}
+
+static void schedule_copy(struct thin_c *tc, dm_block_t virt_block,
+ dm_block_t data_origin, dm_block_t data_dest,
+ struct cell *cell, struct bio *bio)
+{
+ int r;
+ struct pool *pool = tc->pool;
+ struct new_mapping *m = get_next_mapping(pool);
+
+ INIT_LIST_HEAD(&m->list);
+ m->prepared = 0;
+ m->tc = tc;
+ m->virt_block = virt_block;
+ m->data_block = data_dest;
+ m->cell = cell;
+ m->err = 0;
+ m->bio = NULL;
+
+ ds_add_work(&pool->ds, &m->list);
+
+ /*
+ * IO to pool_dev remaps to the pool target's data_dev.
+ *
+ * If the whole block of data is being overwritten, we can issue the
+ * bio immediately. Otherwise we use kcopyd to clone the data first.
+ */
+ if (io_overwrites_block(pool, bio)) {
+ m->bio = bio;
+ save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+ dm_get_mapinfo(bio)->ptr = m;
+ remap_and_issue(tc, bio, data_dest);
+ } else {
+ struct dm_io_region from, to;
+
+ from.bdev = tc->pool_dev->bdev;
+ from.sector = data_origin * pool->sectors_per_block;
+ from.count = pool->sectors_per_block;
+
+ to.bdev = tc->pool_dev->bdev;
+ to.sector = data_dest * pool->sectors_per_block;
+ to.count = pool->sectors_per_block;
+
+ r = dm_kcopyd_copy(pool->copier, &from, 1, &to,
+ 0, copy_complete, m);
+ if (r < 0) {
+ mempool_free(m, pool->mapping_pool);
+ DMERR("dm_kcopyd_copy() failed");
+ cell_error(cell);
+ }
+ }
+}
+
+static void schedule_zero(struct thin_c *tc, dm_block_t virt_block,
+ dm_block_t data_block, struct cell *cell,
+ struct bio *bio)
+{
+ struct pool *pool = tc->pool;
+ struct new_mapping *m = get_next_mapping(pool);
+
+ INIT_LIST_HEAD(&m->list);
+ m->prepared = 0;
+ m->tc = tc;
+ m->virt_block = virt_block;
+ m->data_block = data_block;
+ m->cell = cell;
+ m->err = 0;
+ m->bio = NULL;
+
+ /*
+ * If the whole block of data is being overwritten or we are not
+ * zeroing pre-existing data, we can issue the bio immediately.
+ * Otherwise we use kcopyd to zero the data first.
+ */
+ if (!pool->zero_new_blocks)
+ process_prepared_mapping(m);
+
+ else if (io_overwrites_block(pool, bio)) {
+ m->bio = bio;
+ save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+ dm_get_mapinfo(bio)->ptr = m;
+ remap_and_issue(tc, bio, data_block);
+
+ } else {
+ int r;
+ struct dm_io_region to;
+
+ to.bdev = tc->pool_dev->bdev;
+ to.sector = data_block * pool->sectors_per_block;
+ to.count = pool->sectors_per_block;
+
+ r = dm_kcopyd_zero(pool->copier, 1, &to, 0, copy_complete, m);
+ if (r < 0) {
+ mempool_free(m, pool->mapping_pool);
+ DMERR("dm_kcopyd_zero() failed");
+ cell_error(cell);
+ }
+ }
+}
+
+static int alloc_data_block(struct thin_c *tc, dm_block_t *result)
+{
+ int r;
+ dm_block_t free_blocks;
+ unsigned long flags;
+ struct pool *pool = tc->pool;
+
+ r = dm_pool_get_free_block_count(pool->pmd, &free_blocks);
+ if (r)
+ return r;
+
+ if (free_blocks <= pool->low_water_blocks && !pool->low_water_triggered) {
+ DMWARN("%s: reached low water mark, sending event.",
+ dm_device_name(pool->pool_md));
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->low_water_triggered = 1;
+ spin_unlock_irqrestore(&pool->lock, flags);
+ dm_table_event(pool->ti->table);
+ }
+
+ if (!free_blocks) {
+ if (pool->no_free_space)
+ return -ENOSPC;
+ else {
+ /*
+ * Try to commit to see if that will free up some
+ * more space.
+ */
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+
+ r = dm_pool_get_free_block_count(pool->pmd, &free_blocks);
+ if (r)
+ return r;
+
+ /*
+ * If we still have no space we set a flag to avoid
+ * doing all this checking and return -ENOSPC.
+ */
+ if (!free_blocks) {
+ DMWARN("%s: no free space available.",
+ dm_device_name(pool->pool_md));
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->no_free_space = 1;
+ spin_unlock_irqrestore(&pool->lock, flags);
+ return -ENOSPC;
+ }
+ }
+ }
+
+ r = dm_pool_alloc_data_block(pool->pmd, result);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+/*
+ * If we have run out of space, queue bios until the device is
+ * resumed, presumably after having been reloaded with more space.
+ */
+static void retry_on_resume(struct bio *bio)
+{
+ struct thin_c *tc = dm_get_mapinfo(bio)->ptr;
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_add(&pool->retry_on_resume_list, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+static void no_space(struct cell *cell)
+{
+ struct bio *bio;
+ struct bio_list bios;
+
+ bio_list_init(&bios);
+ cell_release(cell, &bios);
+
+ while ((bio = bio_list_pop(&bios)))
+ retry_on_resume(bio);
+}
+
+static void break_sharing(struct thin_c *tc, struct bio *bio, dm_block_t block,
+ struct cell_key *key,
+ struct dm_thin_lookup_result *lookup_result,
+ struct cell *cell)
+{
+ int r;
+ dm_block_t data_block;
+
+ r = alloc_data_block(tc, &data_block);
+ switch (r) {
+ case 0:
+ schedule_copy(tc, block, lookup_result->block,
+ data_block, cell, bio);
+ break;
+
+ case -ENOSPC:
+ no_space(cell);
+ break;
+
+ default:
+ DMERR("%s: alloc_data_block() failed, error = %d", __func__, r);
+ cell_error(cell);
+ break;
+ }
+}
+
+static void process_shared_bio(struct thin_c *tc, struct bio *bio,
+ dm_block_t block,
+ struct dm_thin_lookup_result *lookup_result)
+{
+ struct cell *cell;
+ struct pool *pool = tc->pool;
+ struct cell_key key;
+
+ /*
+ * If cell is already occupied, then sharing is already in the process
+ * of being broken so we have nothing further to do here.
+ */
+ build_data_key(tc->td, lookup_result->block, &key);
+ if (bio_detain(pool->prison, &key, bio, &cell))
+ return;
+
+ if (bio_data_dir(bio) == WRITE)
+ break_sharing(tc, bio, block, &key, lookup_result, cell);
+ else {
+ struct endio_hook *h;
+ h = mempool_alloc(pool->endio_hook_pool, GFP_NOIO);
+
+ h->tc = tc;
+ h->entry = ds_inc(&pool->ds);
+ save_and_set_endio(bio, &h->saved_bi_end_io, shared_read_endio);
+ dm_get_mapinfo(bio)->ptr = h;
+
+ cell_release_singleton(cell, bio);
+ remap_and_issue(tc, bio, lookup_result->block);
+ }
+}
+
+static void provision_block(struct thin_c *tc, struct bio *bio, dm_block_t block,
+ struct cell *cell)
+{
+ int r;
+ dm_block_t data_block;
+
+ /*
+ * Remap empty bios (flushes) immediately, without provisioning.
+ */
+ if (!bio->bi_size) {
+ cell_release_singleton(cell, bio);
+ remap_and_issue(tc, bio, 0);
+ return;
+ }
+
+ /*
+ * Fill read bios with zeroes and complete them immediately.
+ */
+ if (bio_data_dir(bio) == READ) {
+ zero_fill_bio(bio);
+ cell_release_singleton(cell, bio);
+ bio_endio(bio, 0);
+ return;
+ }
+
+ r = alloc_data_block(tc, &data_block);
+ switch (r) {
+ case 0:
+ schedule_zero(tc, block, data_block, cell, bio);
+ break;
+
+ case -ENOSPC:
+ no_space(cell);
+ break;
+
+ default:
+ DMERR("%s: alloc_data_block() failed, error = %d", __func__, r);
+ cell_error(cell);
+ break;
+ }
+}
+
+static void process_bio(struct thin_c *tc, struct bio *bio)
+{
+ int r;
+ dm_block_t block = get_bio_block(tc, bio);
+ struct cell *cell;
+ struct cell_key key;
+ struct dm_thin_lookup_result lookup_result;
+
+ /*
+ * If cell is already occupied, then the block is already
+ * being provisioned so we have nothing further to do here.
+ */
+ build_virtual_key(tc->td, block, &key);
+ if (bio_detain(tc->pool->prison, &key, bio, &cell))
+ return;
+
+ r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
+ switch (r) {
+ case 0:
+ /*
+ * We can release this cell now. This thread is the only
+ * one that puts bios into a cell, and we know there were
+ * no preceding bios.
+ */
+ /*
+ * TODO: this will probably have to change when discard goes
+ * back in.
+ */
+ cell_release_singleton(cell, bio);
+
+ if (lookup_result.shared)
+ process_shared_bio(tc, bio, block, &lookup_result);
+ else
+ remap_and_issue(tc, bio, lookup_result.block);
+ break;
+
+ case -ENODATA:
+ provision_block(tc, bio, block, cell);
+ break;
+
+ default:
+ DMERR("dm_thin_find_block() failed, error = %d", r);
+ bio_io_error(bio);
+ break;
+ }
+}
+
+static void process_deferred_bios(struct pool *pool)
+{
+ unsigned long flags;
+ struct bio *bio;
+ struct bio_list bios;
+ int r;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_merge(&bios, &pool->deferred_bios);
+ bio_list_init(&pool->deferred_bios);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ while ((bio = bio_list_pop(&bios))) {
+ struct thin_c *tc = dm_get_mapinfo(bio)->ptr;
+ /*
+ * If we've got no free new_mapping structs, and processing
+ * this bio might require one, we pause until there are some
+ * prepared mappings to process.
+ */
+ if (ensure_next_mapping(pool)) {
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_merge(&pool->deferred_bios, &bios);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ break;
+ }
+ process_bio(tc, bio);
+ }
+
+ /*
+ * If there are any deferred flush bios, we must commit
+ * the metadata before issuing them.
+ */
+ bio_list_init(&bios);
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_merge(&bios, &pool->deferred_flush_bios);
+ bio_list_init(&pool->deferred_flush_bios);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ if (bio_list_empty(&bios))
+ return;
+
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ while ((bio = bio_list_pop(&bios)))
+ bio_io_error(bio);
+ return;
+ }
+
+ while ((bio = bio_list_pop(&bios)))
+ generic_make_request(bio);
+}
+
+static void do_worker(struct work_struct *ws)
+{
+ struct pool *pool = container_of(ws, struct pool, worker);
+
+ process_prepared_mappings(pool);
+ process_deferred_bios(pool);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Mapping functions.
+ */
+
+/*
+ * Called only while mapping a thin bio to hand it over to the workqueue.
+ */
+static void thin_defer_bio(struct thin_c *tc, struct bio *bio)
+{
+ unsigned long flags;
+ struct pool *pool = tc->pool;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_add(&pool->deferred_bios, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+/*
+ * Non-blocking function called from the thin target's map function.
+ */
+static int thin_bio_map(struct dm_target *ti, struct bio *bio,
+ union map_info *map_context)
+{
+ int r;
+ struct thin_c *tc = ti->private;
+ dm_block_t block = get_bio_block(tc, bio);
+ struct dm_thin_device *td = tc->td;
+ struct dm_thin_lookup_result result;
+
+ /*
+ * Save the thin context for easy access from the deferred bio later.
+ */
+ map_context->ptr = tc;
+
+ if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
+ thin_defer_bio(tc, bio);
+ return DM_MAPIO_SUBMITTED;
+ }
+
+ r = dm_thin_find_block(td, block, 0, &result);
+
+ /*
+ * Note that we defer readahead too.
+ */
+ switch (r) {
+ case 0:
+ if (unlikely(result.shared)) {
+ /*
+ * We have a race condition here between the
+ * result.shared value returned by the lookup and
+ * snapshot creation, which may cause new
+ * sharing.
+ *
+ * To avoid this always quiesce the origin before
+ * taking the snap. You want to do this anyway to
+ * ensure a consistent application view
+ * (i.e. lockfs).
+ *
+ * More distant ancestors are irrelevant. The
+ * shared flag will be set in their case.
+ */
+ thin_defer_bio(tc, bio);
+ r = DM_MAPIO_SUBMITTED;
+ } else {
+ remap(tc, bio, result.block);
+ r = DM_MAPIO_REMAPPED;
+ }
+ break;
+
+ case -ENODATA:
+ /*
+ * In future, the failed dm_thin_find_block above could
+ * provide the hint to load the metadata into cache.
+ */
+ case -EWOULDBLOCK:
+ thin_defer_bio(tc, bio);
+ r = DM_MAPIO_SUBMITTED;
+ break;
+ }
+
+ return r;
+}
+
+static int pool_is_congested(struct dm_target_callbacks *cb, int bdi_bits)
+{
+ int r;
+ unsigned long flags;
+ struct pool_c *pt = container_of(cb, struct pool_c, callbacks);
+
+ spin_lock_irqsave(&pt->pool->lock, flags);
+ r = !bio_list_empty(&pt->pool->retry_on_resume_list);
+ spin_unlock_irqrestore(&pt->pool->lock, flags);
+
+ if (!r) {
+ struct request_queue *q = bdev_get_queue(pt->data_dev->bdev);
+ r = bdi_congested(&q->backing_dev_info, bdi_bits);
+ }
+
+ return r;
+}
+
+static void __requeue_bios(struct pool *pool)
+{
+ bio_list_merge(&pool->deferred_bios, &pool->retry_on_resume_list);
+ bio_list_init(&pool->retry_on_resume_list);
+}
+
+/*----------------------------------------------------------------
+ * Binding of control targets to a pool object
+ *--------------------------------------------------------------*/
+static int bind_control_target(struct pool *pool, struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+
+ pool->ti = ti;
+ pool->low_water_blocks = pt->low_water_blocks;
+ pool->zero_new_blocks = pt->zero_new_blocks;
+
+ return 0;
+}
+
+static void unbind_control_target(struct pool *pool, struct dm_target *ti)
+{
+ if (pool->ti == ti)
+ pool->ti = NULL;
+}
+
+/*----------------------------------------------------------------
+ * Pool creation
+ *--------------------------------------------------------------*/
+static void __pool_destroy(struct pool *pool)
+{
+ __pool_table_remove(pool);
+
+ if (dm_pool_metadata_close(pool->pmd) < 0)
+ DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
+
+ prison_destroy(pool->prison);
+ dm_kcopyd_client_destroy(pool->copier);
+
+ if (pool->wq)
+ destroy_workqueue(pool->wq);
+
+ if (pool->next_mapping)
+ mempool_free(pool->next_mapping, pool->mapping_pool);
+ mempool_destroy(pool->mapping_pool);
+ mempool_destroy(pool->endio_hook_pool);
+ kfree(pool);
+}
+
+static struct pool *pool_create(struct mapped_device *pool_md,
+ struct block_device *metadata_dev,
+ unsigned long block_size, char **error)
+{
+ int r;
+ void *err_p;
+ struct pool *pool;
+ struct dm_pool_metadata *pmd;
+
+ pmd = dm_pool_metadata_open(metadata_dev, block_size);
+ if (IS_ERR(pmd)) {
+ *error = "Error creating metadata object";
+ return (struct pool *)pmd;
+ }
+
+ pool = kmalloc(sizeof(*pool), GFP_KERNEL);
+ if (!pool) {
+ *error = "Error allocating memory for pool";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_pool;
+ }
+
+ pool->pmd = pmd;
+ pool->sectors_per_block = block_size;
+ pool->block_shift = ffs(block_size) - 1;
+ pool->offset_mask = block_size - 1;
+ pool->low_water_blocks = 0;
+ pool->zero_new_blocks = 1;
+ pool->prison = prison_create(PRISON_CELLS);
+ if (!pool->prison) {
+ *error = "Error creating pool's bio prison";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_prison;
+ }
+
+ pool->copier = dm_kcopyd_client_create();
+ if (IS_ERR(pool->copier)) {
+ r = PTR_ERR(pool->copier);
+ *error = "Error creating pool's kcopyd client";
+ err_p = ERR_PTR(r);
+ goto bad_kcopyd_client;
+ }
+
+ /*
+ * Create singlethreaded workqueue that will service all devices
+ * that use this metadata.
+ */
+ pool->wq = alloc_ordered_workqueue("dm-" DM_MSG_PREFIX, WQ_MEM_RECLAIM);
+ if (!pool->wq) {
+ *error = "Error creating pool's workqueue";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_wq;
+ }
+
+ INIT_WORK(&pool->worker, do_worker);
+ spin_lock_init(&pool->lock);
+ bio_list_init(&pool->deferred_bios);
+ bio_list_init(&pool->deferred_flush_bios);
+ INIT_LIST_HEAD(&pool->prepared_mappings);
+ pool->low_water_triggered = 0;
+ pool->no_free_space = 0;
+ bio_list_init(&pool->retry_on_resume_list);
+ ds_init(&pool->ds);
+
+ pool->next_mapping = NULL;
+ pool->mapping_pool =
+ mempool_create_kmalloc_pool(MAPPING_POOL_SIZE, sizeof(struct new_mapping));
+ if (!pool->mapping_pool) {
+ *error = "Error creating pool's mapping mempool";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_mapping_pool;
+ }
+
+ pool->endio_hook_pool =
+ mempool_create_kmalloc_pool(ENDIO_HOOK_POOL_SIZE, sizeof(struct endio_hook));
+ if (!pool->endio_hook_pool) {
+ *error = "Error creating pool's endio_hook mempool";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_endio_hook_pool;
+ }
+ pool->ref_count = 1;
+ pool->pool_md = pool_md;
+ pool->md_dev = metadata_dev;
+ __pool_table_insert(pool);
+
+ return pool;
+
+bad_endio_hook_pool:
+ mempool_destroy(pool->mapping_pool);
+bad_mapping_pool:
+ destroy_workqueue(pool->wq);
+bad_wq:
+ dm_kcopyd_client_destroy(pool->copier);
+bad_kcopyd_client:
+ prison_destroy(pool->prison);
+bad_prison:
+ kfree(pool);
+bad_pool:
+ if (dm_pool_metadata_close(pmd))
+ DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
+
+ return err_p;
+}
+
+static void __pool_inc(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ pool->ref_count++;
+}
+
+static void __pool_dec(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ BUG_ON(!pool->ref_count);
+ if (!--pool->ref_count)
+ __pool_destroy(pool);
+}
+
+static struct pool *__pool_find(struct mapped_device *pool_md,
+ struct block_device *metadata_dev,
+ unsigned long block_size, char **error)
+{
+ struct pool *pool = __pool_table_lookup_metadata_dev(metadata_dev);
+
+ if (pool) {
+ if (pool->pool_md != pool_md)
+ return ERR_PTR(-EBUSY);
+ __pool_inc(pool);
+
+ } else {
+ pool = __pool_table_lookup(pool_md);
+ if (pool) {
+ if (pool->md_dev != metadata_dev)
+ return ERR_PTR(-EINVAL);
+ __pool_inc(pool);
+
+ } else
+ pool = pool_create(pool_md, metadata_dev, block_size, error);
+ }
+
+ return pool;
+}
+
+/*----------------------------------------------------------------
+ * Pool target methods
+ *--------------------------------------------------------------*/
+static void pool_dtr(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ unbind_control_target(pt->pool, ti);
+ __pool_dec(pt->pool);
+ dm_put_device(ti, pt->metadata_dev);
+ dm_put_device(ti, pt->data_dev);
+ kfree(pt);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+}
+
+struct pool_features {
+ unsigned zero_new_blocks:1;
+};
+
+static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf,
+ struct dm_target *ti)
+{
+ int r;
+ unsigned argc;
+ const char *arg_name;
+
+ static struct dm_arg _args[] = {
+ {0, 1, "Invalid number of pool feature arguments"},
+ };
+
+ /*
+ * No feature arguments supplied.
+ */
+ if (!as->argc)
+ return 0;
+
+ r = dm_read_arg_group(_args, as, &argc, &ti->error);
+ if (r)
+ return -EINVAL;
+
+ while (argc && !r) {
+ arg_name = dm_shift_arg(as);
+ argc--;
+
+ if (!strcasecmp(arg_name, "skip_block_zeroing")) {
+ pf->zero_new_blocks = 0;
+ continue;
+ }
+
+ ti->error = "Unrecognised pool feature requested";
+ r = -EINVAL;
+ }
+
+ return r;
+}
+
+/*
+ * thin-pool <metadata dev> <data dev>
+ * <data block size (sectors)>
+ * <low water mark (blocks)>
+ * [<#feature args> [<arg>]*]
+ *
+ * Optional feature arguments are:
+ * skip_block_zeroing: skips the zeroing of newly-provisioned blocks.
+ */
+static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
+{
+ int r;
+ struct pool_c *pt;
+ struct pool *pool;
+ struct pool_features pf;
+ struct dm_arg_set as;
+ struct dm_dev *data_dev;
+ unsigned long block_size;
+ dm_block_t low_water_blocks;
+ struct dm_dev *metadata_dev;
+ sector_t metadata_dev_size;
+
+ /*
+ * FIXME Remove validation from scope of lock.
+ */
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ if (argc < 4) {
+ ti->error = "Invalid argument count";
+ r = -EINVAL;
+ goto out_unlock;
+ }
+ as.argc = argc;
+ as.argv = argv;
+
+ r = dm_get_device(ti, argv[0], FMODE_READ | FMODE_WRITE, &metadata_dev);
+ if (r) {
+ ti->error = "Error opening metadata block device";
+ goto out_unlock;
+ }
+
+ metadata_dev_size = i_size_read(metadata_dev->bdev->bd_inode) >> SECTOR_SHIFT;
+ if (metadata_dev_size > METADATA_DEV_MAX_SECTORS) {
+ ti->error = "Metadata device is too large";
+ r = -EINVAL;
+ goto out_metadata;
+ }
+
+ r = dm_get_device(ti, argv[1], FMODE_READ | FMODE_WRITE, &data_dev);
+ if (r) {
+ ti->error = "Error getting data device";
+ goto out_metadata;
+ }
+
+ if (kstrtoul(argv[2], 10, &block_size) || !block_size ||
+ block_size < DATA_DEV_BLOCK_SIZE_MIN_SECTORS ||
+ block_size > DATA_DEV_BLOCK_SIZE_MAX_SECTORS ||
+ !is_power_of_2(block_size)) {
+ ti->error = "Invalid block size";
+ r = -EINVAL;
+ goto out;
+ }
+
+ if (kstrtoull(argv[3], 10, (unsigned long long *)&low_water_blocks)) {
+ ti->error = "Invalid low water mark";
+ r = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * Set default pool features.
+ */
+ memset(&pf, 0, sizeof(pf));
+ pf.zero_new_blocks = 1;
+
+ dm_consume_args(&as, 4);
+ r = parse_pool_features(&as, &pf, ti);
+ if (r)
+ goto out;
+
+ pt = kzalloc(sizeof(*pt), GFP_KERNEL);
+ if (!pt) {
+ r = -ENOMEM;
+ goto out;
+ }
+
+ pool = __pool_find(dm_table_get_md(ti->table), metadata_dev->bdev,
+ block_size, &ti->error);
+ if (IS_ERR(pool)) {
+ r = PTR_ERR(pool);
+ goto out_free_pt;
+ }
+
+ pt->pool = pool;
+ pt->ti = ti;
+ pt->metadata_dev = metadata_dev;
+ pt->data_dev = data_dev;
+ pt->low_water_blocks = low_water_blocks;
+ pt->zero_new_blocks = pf.zero_new_blocks;
+ ti->num_flush_requests = 1;
+ ti->num_discard_requests = 0;
+ ti->private = pt;
+
+ pt->callbacks.congested_fn = pool_is_congested;
+ dm_table_add_target_callbacks(ti->table, &pt->callbacks);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return 0;
+
+out_free_pt:
+ kfree(pt);
+out:
+ dm_put_device(ti, data_dev);
+out_metadata:
+ dm_put_device(ti, metadata_dev);
+out_unlock:
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return r;
+}
+
+static int pool_map(struct dm_target *ti, struct bio *bio,
+ union map_info *map_context)
+{
+ int r;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ /*
+ * As this is a singleton target, ti->begin is always zero.
+ */
+ spin_lock_irqsave(&pool->lock, flags);
+ bio->bi_bdev = pt->data_dev->bdev;
+ r = DM_MAPIO_REMAPPED;
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ return r;
+}
+
+/*
+ * Retrieves the number of blocks of the data device from
+ * the superblock and compares it to the actual device size,
+ * thus resizing the data device in case it has grown.
+ *
+ * This both copes with opening preallocated data devices in the ctr
+ * being followed by a resume
+ * -and-
+ * calling the resume method individually after userspace has
+ * grown the data device in reaction to a table event.
+ */
+static int pool_preresume(struct dm_target *ti)
+{
+ int r;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ dm_block_t data_size, sb_data_size;
+
+ /*
+ * Take control of the pool object.
+ */
+ r = bind_control_target(pool, ti);
+ if (r)
+ return r;
+
+ data_size = ti->len >> pool->block_shift;
+ r = dm_pool_get_data_dev_size(pool->pmd, &sb_data_size);
+ if (r) {
+ DMERR("failed to retrieve data device size");
+ return r;
+ }
+
+ if (data_size < sb_data_size) {
+ DMERR("pool target too small, is %llu blocks (expected %llu)",
+ data_size, sb_data_size);
+ return -EINVAL;
+
+ } else if (data_size > sb_data_size) {
+ r = dm_pool_resize_data_dev(pool->pmd, data_size);
+ if (r) {
+ DMERR("failed to resize data device");
+ return r;
+ }
+
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+ }
+
+ return 0;
+}
+
+static void pool_resume(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->low_water_triggered = 0;
+ pool->no_free_space = 0;
+ __requeue_bios(pool);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+static void pool_postsuspend(struct dm_target *ti)
+{
+ int r;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ flush_workqueue(pool->wq);
+
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r < 0) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ /* FIXME: invalidate device? error the next FUA or FLUSH bio ?*/
+ }
+}
+
+static int check_arg_count(unsigned argc, unsigned args_required)
+{
+ if (argc != args_required) {
+ DMWARN("Message received with %u arguments instead of %u.",
+ argc, args_required);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int read_dev_id(char *arg, dm_thin_id *dev_id, int warning)
+{
+ if (!kstrtoull(arg, 10, (unsigned long long *)dev_id) &&
+ *dev_id <= MAX_DEV_ID)
+ return 0;
+
+ if (warning)
+ DMWARN("Message received with invalid device id: %s", arg);
+
+ return -EINVAL;
+}
+
+static int process_create_thin_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id dev_id;
+ int r;
+
+ r = check_arg_count(argc, 2);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[1], &dev_id, 1);
+ if (r)
+ return r;
+
+ r = dm_pool_create_thin(pool->pmd, dev_id);
+ if (r) {
+ DMWARN("Creation of new thinly-provisioned device with id %s failed.",
+ argv[1]);
+ return r;
+ }
+
+ return 0;
+}
+
+static int process_create_snap_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id dev_id;
+ dm_thin_id origin_dev_id;
+ int r;
+
+ r = check_arg_count(argc, 3);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[1], &dev_id, 1);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[2], &origin_dev_id, 1);
+ if (r)
+ return r;
+
+ r = dm_pool_create_snap(pool->pmd, dev_id, origin_dev_id);
+ if (r) {
+ DMWARN("Creation of new snapshot %s of device %s failed.",
+ argv[1], argv[2]);
+ return r;
+ }
+
+ return 0;
+}
+
+static int process_delete_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id dev_id;
+ int r;
+
+ r = check_arg_count(argc, 2);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[1], &dev_id, 1);
+ if (r)
+ return r;
+
+ r = dm_pool_delete_thin_device(pool->pmd, dev_id);
+ if (r)
+ DMWARN("Deletion of thin device %s failed.", argv[1]);
+
+ return r;
+}
+
+static int process_set_transaction_id_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id old_id, new_id;
+ int r;
+
+ r = check_arg_count(argc, 3);
+ if (r)
+ return r;
+
+ if (kstrtoull(argv[1], 10, (unsigned long long *)&old_id)) {
+ DMWARN("set_transaction_id message: Unrecognised id %s.", argv[1]);
+ return -EINVAL;
+ }
+
+ if (kstrtoull(argv[2], 10, (unsigned long long *)&new_id)) {
+ DMWARN("set_transaction_id message: Unrecognised new id %s.", argv[2]);
+ return -EINVAL;
+ }
+
+ r = dm_pool_set_metadata_transaction_id(pool->pmd, old_id, new_id);
+ if (r) {
+ DMWARN("Failed to change transaction id from %s to %s.",
+ argv[1], argv[2]);
+ return r;
+ }
+
+ return 0;
+}
+
+/*
+ * Messages supported:
+ * create_thin <dev_id>
+ * create_snap <dev_id> <origin_id>
+ * delete <dev_id>
+ * trim <dev_id> <new_size_in_sectors>
+ * set_transaction_id <current_trans_id> <new_trans_id>
+ */
+static int pool_message(struct dm_target *ti, unsigned argc, char **argv)
+{
+ int r = -EINVAL;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ if (!strcasecmp(argv[0], "create_thin"))
+ r = process_create_thin_mesg(argc, argv, pool);
+
+ else if (!strcasecmp(argv[0], "create_snap"))
+ r = process_create_snap_mesg(argc, argv, pool);
+
+ else if (!strcasecmp(argv[0], "delete"))
+ r = process_delete_mesg(argc, argv, pool);
+
+ else if (!strcasecmp(argv[0], "set_transaction_id"))
+ r = process_set_transaction_id_mesg(argc, argv, pool);
+
+ else
+ DMWARN("Unrecognised thin pool target message received: %s", argv[0]);
+
+ if (!r) {
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r)
+ DMERR("%s message: dm_pool_commit_metadata() failed, error = %d",
+ argv[0], r);
+ }
+
+ return r;
+}
+
+/*
+ * Status line is:
+ * <transaction id> <used metadata sectors>/<total metadata sectors>
+ * <used data sectors>/<total data sectors> <held metadata root>
+ */
+static int pool_status(struct dm_target *ti, status_type_t type,
+ char *result, unsigned maxlen)
+{
+ int r;
+ unsigned sz = 0;
+ uint64_t transaction_id;
+ dm_block_t nr_free_blocks_data;
+ dm_block_t nr_free_blocks_metadata;
+ dm_block_t nr_blocks_data;
+ dm_block_t nr_blocks_metadata;
+ dm_block_t held_root;
+ char buf[BDEVNAME_SIZE];
+ char buf2[BDEVNAME_SIZE];
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ switch (type) {
+ case STATUSTYPE_INFO:
+ r = dm_pool_get_metadata_transaction_id(pool->pmd,
+ &transaction_id);
+ if (r)
+ return r;
+
+ r = dm_pool_get_free_metadata_block_count(pool->pmd,
+ &nr_free_blocks_metadata);
+ if (r)
+ return r;
+
+ r = dm_pool_get_metadata_dev_size(pool->pmd, &nr_blocks_metadata);
+ if (r)
+ return r;
+
+ r = dm_pool_get_free_block_count(pool->pmd,
+ &nr_free_blocks_data);
+ if (r)
+ return r;
+
+ r = dm_pool_get_data_dev_size(pool->pmd, &nr_blocks_data);
+ if (r)
+ return r;
+
+ r = dm_pool_get_held_metadata_root(pool->pmd, &held_root);
+ if (r)
+ return r;
+
+ DMEMIT("%llu %llu/%llu %llu/%llu ",
+ (unsigned long long)transaction_id,
+ (unsigned long long)(nr_blocks_metadata - nr_free_blocks_metadata),
+ (unsigned long long)nr_blocks_metadata,
+ (unsigned long long)(nr_blocks_data - nr_free_blocks_data),
+ (unsigned long long)nr_blocks_data);
+
+ if (held_root)
+ DMEMIT("%llu", held_root);
+ else
+ DMEMIT("-");
+
+ break;
+
+ case STATUSTYPE_TABLE:
+ DMEMIT("%s %s %lu %llu ",
+ format_dev_t(buf, pt->metadata_dev->bdev->bd_dev),
+ format_dev_t(buf2, pt->data_dev->bdev->bd_dev),
+ (unsigned long)pool->sectors_per_block,
+ (unsigned long long)pt->low_water_blocks);
+
+ DMEMIT("%u ", !pool->zero_new_blocks);
+
+ if (!pool->zero_new_blocks)
+ DMEMIT("skip_block_zeroing ");
+ break;
+ }
+
+ return 0;
+}
+
+static int pool_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct pool_c *pt = ti->private;
+
+ return fn(ti, pt->data_dev, 0, ti->len, data);
+}
+
+static int pool_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
+ struct bio_vec *biovec, int max_size)
+{
+ struct pool_c *pt = ti->private;
+ struct request_queue *q = bdev_get_queue(pt->data_dev->bdev);
+
+ if (!q->merge_bvec_fn)
+ return max_size;
+
+ bvm->bi_bdev = pt->data_dev->bdev;
+
+ return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
+}
+
+static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ blk_limits_io_min(limits, 0);
+ blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT);
+}
+
+static struct target_type pool_target = {
+ .name = "thin-pool",
+ .features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE |
+ DM_TARGET_IMMUTABLE,
+ .version = {1, 0, 0},
+ .module = THIS_MODULE,
+ .ctr = pool_ctr,
+ .dtr = pool_dtr,
+ .map = pool_map,
+ .postsuspend = pool_postsuspend,
+ .preresume = pool_preresume,
+ .resume = pool_resume,
+ .message = pool_message,
+ .status = pool_status,
+ .merge = pool_merge,
+ .iterate_devices = pool_iterate_devices,
+ .io_hints = pool_io_hints,
+};
+
+/*----------------------------------------------------------------
+ * Thin target methods
+ *--------------------------------------------------------------*/
+static void thin_dtr(struct dm_target *ti)
+{
+ struct thin_c *tc = ti->private;
+
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ __pool_dec(tc->pool);
+ dm_pool_close_thin_device(tc->td);
+ dm_put_device(ti, tc->pool_dev);
+ kfree(tc);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+}
+
+/*
+ * Thin target parameters:
+ *
+ * <pool_dev> <dev_id>
+ *
+ * pool_dev: the path to the pool (eg, /dev/mapper/my_pool)
+ * dev_id: the internal device identifier
+ */
+static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
+{
+ int r;
+ struct thin_c *tc;
+ struct dm_dev *pool_dev;
+ struct mapped_device *pool_md;
+
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ if (argc != 2) {
+ ti->error = "Invalid argument count";
+ r = -EINVAL;
+ goto out_unlock;
+ }
+
+ tc = ti->private = kzalloc(sizeof(*tc), GFP_KERNEL);
+ if (!tc) {
+ ti->error = "Out of memory";
+ r = -ENOMEM;
+ goto out_unlock;
+ }
+
+ r = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), &pool_dev);
+ if (r) {
+ ti->error = "Error opening pool device";
+ goto bad_pool_dev;
+ }
+ tc->pool_dev = pool_dev;
+
+ if (read_dev_id(argv[1], (unsigned long long *)&tc->dev_id, 0)) {
+ ti->error = "Invalid device id";
+ r = -EINVAL;
+ goto bad_common;
+ }
+
+ pool_md = dm_get_md(tc->pool_dev->bdev->bd_dev);
+ if (!pool_md) {
+ ti->error = "Couldn't get pool mapped device";
+ r = -EINVAL;
+ goto bad_common;
+ }
+
+ tc->pool = __pool_table_lookup(pool_md);
+ if (!tc->pool) {
+ ti->error = "Couldn't find pool object";
+ r = -EINVAL;
+ goto bad_pool_lookup;
+ }
+ __pool_inc(tc->pool);
+
+ r = dm_pool_open_thin_device(tc->pool->pmd, tc->dev_id, &tc->td);
+ if (r) {
+ ti->error = "Couldn't open thin internal device";
+ goto bad_thin_open;
+ }
+
+ ti->split_io = tc->pool->sectors_per_block;
+ ti->num_flush_requests = 1;
+ ti->num_discard_requests = 0;
+ ti->discards_supported = 0;
+
+ dm_put(pool_md);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return 0;
+
+bad_thin_open:
+ __pool_dec(tc->pool);
+bad_pool_lookup:
+ dm_put(pool_md);
+bad_common:
+ dm_put_device(ti, tc->pool_dev);
+bad_pool_dev:
+ kfree(tc);
+out_unlock:
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return r;
+}
+
+static int thin_map(struct dm_target *ti, struct bio *bio,
+ union map_info *map_context)
+{
+ bio->bi_sector -= ti->begin;
+
+ return thin_bio_map(ti, bio, map_context);
+}
+
+static void thin_postsuspend(struct dm_target *ti)
+{
+ if (dm_noflush_suspending(ti))
+ requeue_io((struct thin_c *)ti->private);
+}
+
+/*
+ * <nr mapped sectors> <highest mapped sector>
+ */
+static int thin_status(struct dm_target *ti, status_type_t type,
+ char *result, unsigned maxlen)
+{
+ int r;
+ ssize_t sz = 0;
+ dm_block_t mapped, highest;
+ char buf[BDEVNAME_SIZE];
+ struct thin_c *tc = ti->private;
+
+ if (!tc->td)
+ DMEMIT("-");
+ else {
+ switch (type) {
+ case STATUSTYPE_INFO:
+ r = dm_thin_get_mapped_count(tc->td, &mapped);
+ if (r)
+ return r;
+
+ r = dm_thin_get_highest_mapped_block(tc->td, &highest);
+ if (r < 0)
+ return r;
+
+ DMEMIT("%llu ", mapped * tc->pool->sectors_per_block);
+ if (r)
+ DMEMIT("%llu", ((highest + 1) *
+ tc->pool->sectors_per_block) - 1);
+ else
+ DMEMIT("-");
+ break;
+
+ case STATUSTYPE_TABLE:
+ DMEMIT("%s %lu",
+ format_dev_t(buf, tc->pool_dev->bdev->bd_dev),
+ (unsigned long) tc->dev_id);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int thin_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ dm_block_t blocks;
+ struct thin_c *tc = ti->private;
+
+ /*
+ * We can't call dm_pool_get_data_dev_size() since that blocks. So
+ * we follow a more convoluted path through to the pool's target.
+ */
+ if (!tc->pool->ti)
+ return 0; /* nothing is bound */
+
+ blocks = tc->pool->ti->len >> tc->pool->block_shift;
+ if (blocks)
+ return fn(ti, tc->pool_dev, 0, tc->pool->sectors_per_block * blocks, data);
+
+ return 0;
+}
+
+static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits)
+{
+ struct thin_c *tc = ti->private;
+
+ blk_limits_io_min(limits, 0);
+ blk_limits_io_opt(limits, tc->pool->sectors_per_block << SECTOR_SHIFT);
+}
+
+static struct target_type thin_target = {
+ .name = "thin",
+ .version = {1, 0, 0},
+ .module = THIS_MODULE,
+ .ctr = thin_ctr,
+ .dtr = thin_dtr,
+ .map = thin_map,
+ .postsuspend = thin_postsuspend,
+ .status = thin_status,
+ .iterate_devices = thin_iterate_devices,
+ .io_hints = thin_io_hints,
+};
+
+/*----------------------------------------------------------------*/
+
+static int __init dm_thin_init(void)
+{
+ int r;
+
+ pool_table_init();
+
+ r = dm_register_target(&thin_target);
+ if (r)
+ return r;
+
+ r = dm_register_target(&pool_target);
+ if (r)
+ dm_unregister_target(&thin_target);
+
+ return r;
+}
+
+static void dm_thin_exit(void)
+{
+ dm_unregister_target(&thin_target);
+ dm_unregister_target(&pool_target);
+}
+
+module_init(dm_thin_init);
+module_exit(dm_thin_exit);
+
+MODULE_DESCRIPTION(DM_NAME "device-mapper thin provisioning target");
+MODULE_AUTHOR("Joe Thornber <dm-devel@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 52b39f3..6b6616a 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -25,6 +25,16 @@
#define DM_MSG_PREFIX "core"
+#ifdef CONFIG_PRINTK
+/*
+ * ratelimit state to be used in DMXXX_LIMIT().
+ */
+DEFINE_RATELIMIT_STATE(dm_ratelimit_state,
+ DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+EXPORT_SYMBOL(dm_ratelimit_state);
+#endif
+
/*
* Cookies are numeric values sent with CHANGE and REMOVE
* uevents while resuming, removing or renaming the device.
@@ -130,6 +140,8 @@
/* Protect queue and type against concurrent access. */
struct mutex type_lock;
+ struct target_type *immutable_target_type;
+
struct gendisk *disk;
char name[16];
@@ -2086,6 +2098,8 @@
write_lock_irqsave(&md->map_lock, flags);
old_map = md->map;
md->map = t;
+ md->immutable_target_type = dm_table_get_immutable_target_type(t);
+
dm_table_set_restrictions(t, q, limits);
if (merge_is_optional)
set_bit(DMF_MERGE_IS_OPTIONAL, &md->flags);
@@ -2156,6 +2170,11 @@
return md->type;
}
+struct target_type *dm_get_immutable_target_type(struct mapped_device *md)
+{
+ return md->immutable_target_type;
+}
+
/*
* Fully initialize a request-based queue (->elevator, ->request_fn, etc).
*/
@@ -2231,6 +2250,7 @@
return md;
}
+EXPORT_SYMBOL_GPL(dm_get_md);
void *dm_get_mdptr(struct mapped_device *md)
{
@@ -2316,7 +2336,6 @@
while (1) {
set_current_state(interruptible);
- smp_mb();
if (!md_in_flight(md))
break;
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 6745dbd..b7dacd5 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -60,6 +60,7 @@
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
int dm_table_any_busy_target(struct dm_table *t);
unsigned dm_table_get_type(struct dm_table *t);
+struct target_type *dm_table_get_immutable_target_type(struct dm_table *t);
bool dm_table_request_based(struct dm_table *t);
bool dm_table_supports_discards(struct dm_table *t);
int dm_table_alloc_md_mempools(struct dm_table *t);
@@ -72,6 +73,7 @@
void dm_unlock_md_type(struct mapped_device *md);
void dm_set_md_type(struct mapped_device *md, unsigned type);
unsigned dm_get_md_type(struct mapped_device *md);
+struct target_type *dm_get_immutable_target_type(struct mapped_device *md);
int dm_setup_md_queue(struct mapped_device *md);
diff --git a/drivers/md/persistent-data/Kconfig b/drivers/md/persistent-data/Kconfig
new file mode 100644
index 0000000..ceb3590
--- /dev/null
+++ b/drivers/md/persistent-data/Kconfig
@@ -0,0 +1,8 @@
+config DM_PERSISTENT_DATA
+ tristate
+ depends on BLK_DEV_DM && EXPERIMENTAL
+ select LIBCRC32C
+ select DM_BUFIO
+ ---help---
+ Library providing immutable on-disk data structure support for
+ device-mapper targets such as the thin provisioning target.
diff --git a/drivers/md/persistent-data/Makefile b/drivers/md/persistent-data/Makefile
new file mode 100644
index 0000000..cfa95f6
--- /dev/null
+++ b/drivers/md/persistent-data/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_DM_PERSISTENT_DATA) += dm-persistent-data.o
+dm-persistent-data-objs := \
+ dm-block-manager.o \
+ dm-space-map-checker.o \
+ dm-space-map-common.o \
+ dm-space-map-disk.o \
+ dm-space-map-metadata.o \
+ dm-transaction-manager.o \
+ dm-btree.o \
+ dm-btree-remove.o \
+ dm-btree-spine.o
diff --git a/drivers/md/persistent-data/dm-block-manager.c b/drivers/md/persistent-data/dm-block-manager.c
new file mode 100644
index 0000000..0317ecd
--- /dev/null
+++ b/drivers/md/persistent-data/dm-block-manager.c
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+#include "dm-block-manager.h"
+#include "dm-persistent-data-internal.h"
+#include "../dm-bufio.h"
+
+#include <linux/crc32c.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/rwsem.h>
+#include <linux/device-mapper.h>
+#include <linux/stacktrace.h>
+
+#define DM_MSG_PREFIX "block manager"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * This is a read/write semaphore with a couple of differences.
+ *
+ * i) There is a restriction on the number of concurrent read locks that
+ * may be held at once. This is just an implementation detail.
+ *
+ * ii) Recursive locking attempts are detected and return EINVAL. A stack
+ * trace is also emitted for the previous lock aquisition.
+ *
+ * iii) Priority is given to write locks.
+ */
+#define MAX_HOLDERS 4
+#define MAX_STACK 10
+
+typedef unsigned long stack_entries[MAX_STACK];
+
+struct block_lock {
+ spinlock_t lock;
+ __s32 count;
+ struct list_head waiters;
+ struct task_struct *holders[MAX_HOLDERS];
+
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ struct stack_trace traces[MAX_HOLDERS];
+ stack_entries entries[MAX_HOLDERS];
+#endif
+};
+
+struct waiter {
+ struct list_head list;
+ struct task_struct *task;
+ int wants_write;
+};
+
+static unsigned __find_holder(struct block_lock *lock,
+ struct task_struct *task)
+{
+ unsigned i;
+
+ for (i = 0; i < MAX_HOLDERS; i++)
+ if (lock->holders[i] == task)
+ break;
+
+ BUG_ON(i == MAX_HOLDERS);
+ return i;
+}
+
+/* call this *after* you increment lock->count */
+static void __add_holder(struct block_lock *lock, struct task_struct *task)
+{
+ unsigned h = __find_holder(lock, NULL);
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ struct stack_trace *t;
+#endif
+
+ get_task_struct(task);
+ lock->holders[h] = task;
+
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ t = lock->traces + h;
+ t->nr_entries = 0;
+ t->max_entries = MAX_STACK;
+ t->entries = lock->entries[h];
+ t->skip = 2;
+ save_stack_trace(t);
+#endif
+}
+
+/* call this *before* you decrement lock->count */
+static void __del_holder(struct block_lock *lock, struct task_struct *task)
+{
+ unsigned h = __find_holder(lock, task);
+ lock->holders[h] = NULL;
+ put_task_struct(task);
+}
+
+static int __check_holder(struct block_lock *lock)
+{
+ unsigned i;
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ static struct stack_trace t;
+ static stack_entries entries;
+#endif
+
+ for (i = 0; i < MAX_HOLDERS; i++) {
+ if (lock->holders[i] == current) {
+ DMERR("recursive lock detected in pool metadata");
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ DMERR("previously held here:");
+ print_stack_trace(lock->traces + i, 4);
+
+ DMERR("subsequent aquisition attempted here:");
+ t.nr_entries = 0;
+ t.max_entries = MAX_STACK;
+ t.entries = entries;
+ t.skip = 3;
+ save_stack_trace(&t);
+ print_stack_trace(&t, 4);
+#endif
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void __wait(struct waiter *w)
+{
+ for (;;) {
+ set_task_state(current, TASK_UNINTERRUPTIBLE);
+
+ if (!w->task)
+ break;
+
+ schedule();
+ }
+
+ set_task_state(current, TASK_RUNNING);
+}
+
+static void __wake_waiter(struct waiter *w)
+{
+ struct task_struct *task;
+
+ list_del(&w->list);
+ task = w->task;
+ smp_mb();
+ w->task = NULL;
+ wake_up_process(task);
+}
+
+/*
+ * We either wake a few readers or a single writer.
+ */
+static void __wake_many(struct block_lock *lock)
+{
+ struct waiter *w, *tmp;
+
+ BUG_ON(lock->count < 0);
+ list_for_each_entry_safe(w, tmp, &lock->waiters, list) {
+ if (lock->count >= MAX_HOLDERS)
+ return;
+
+ if (w->wants_write) {
+ if (lock->count > 0)
+ return; /* still read locked */
+
+ lock->count = -1;
+ __add_holder(lock, w->task);
+ __wake_waiter(w);
+ return;
+ }
+
+ lock->count++;
+ __add_holder(lock, w->task);
+ __wake_waiter(w);
+ }
+}
+
+static void bl_init(struct block_lock *lock)
+{
+ int i;
+
+ spin_lock_init(&lock->lock);
+ lock->count = 0;
+ INIT_LIST_HEAD(&lock->waiters);
+ for (i = 0; i < MAX_HOLDERS; i++)
+ lock->holders[i] = NULL;
+}
+
+static int __available_for_read(struct block_lock *lock)
+{
+ return lock->count >= 0 &&
+ lock->count < MAX_HOLDERS &&
+ list_empty(&lock->waiters);
+}
+
+static int bl_down_read(struct block_lock *lock)
+{
+ int r;
+ struct waiter w;
+
+ spin_lock(&lock->lock);
+ r = __check_holder(lock);
+ if (r) {
+ spin_unlock(&lock->lock);
+ return r;
+ }
+
+ if (__available_for_read(lock)) {
+ lock->count++;
+ __add_holder(lock, current);
+ spin_unlock(&lock->lock);
+ return 0;
+ }
+
+ get_task_struct(current);
+
+ w.task = current;
+ w.wants_write = 0;
+ list_add_tail(&w.list, &lock->waiters);
+ spin_unlock(&lock->lock);
+
+ __wait(&w);
+ put_task_struct(current);
+ return 0;
+}
+
+static int bl_down_read_nonblock(struct block_lock *lock)
+{
+ int r;
+
+ spin_lock(&lock->lock);
+ r = __check_holder(lock);
+ if (r)
+ goto out;
+
+ if (__available_for_read(lock)) {
+ lock->count++;
+ __add_holder(lock, current);
+ r = 0;
+ } else
+ r = -EWOULDBLOCK;
+
+out:
+ spin_unlock(&lock->lock);
+ return r;
+}
+
+static void bl_up_read(struct block_lock *lock)
+{
+ spin_lock(&lock->lock);
+ BUG_ON(lock->count <= 0);
+ __del_holder(lock, current);
+ --lock->count;
+ if (!list_empty(&lock->waiters))
+ __wake_many(lock);
+ spin_unlock(&lock->lock);
+}
+
+static int bl_down_write(struct block_lock *lock)
+{
+ int r;
+ struct waiter w;
+
+ spin_lock(&lock->lock);
+ r = __check_holder(lock);
+ if (r) {
+ spin_unlock(&lock->lock);
+ return r;
+ }
+
+ if (lock->count == 0 && list_empty(&lock->waiters)) {
+ lock->count = -1;
+ __add_holder(lock, current);
+ spin_unlock(&lock->lock);
+ return 0;
+ }
+
+ get_task_struct(current);
+ w.task = current;
+ w.wants_write = 1;
+
+ /*
+ * Writers given priority. We know there's only one mutator in the
+ * system, so ignoring the ordering reversal.
+ */
+ list_add(&w.list, &lock->waiters);
+ spin_unlock(&lock->lock);
+
+ __wait(&w);
+ put_task_struct(current);
+
+ return 0;
+}
+
+static void bl_up_write(struct block_lock *lock)
+{
+ spin_lock(&lock->lock);
+ __del_holder(lock, current);
+ lock->count = 0;
+ if (!list_empty(&lock->waiters))
+ __wake_many(lock);
+ spin_unlock(&lock->lock);
+}
+
+static void report_recursive_bug(dm_block_t b, int r)
+{
+ if (r == -EINVAL)
+ DMERR("recursive acquisition of block %llu requested.",
+ (unsigned long long) b);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Block manager is currently implemented using dm-bufio. struct
+ * dm_block_manager and struct dm_block map directly onto a couple of
+ * structs in the bufio interface. I want to retain the freedom to move
+ * away from bufio in the future. So these structs are just cast within
+ * this .c file, rather than making it through to the public interface.
+ */
+static struct dm_buffer *to_buffer(struct dm_block *b)
+{
+ return (struct dm_buffer *) b;
+}
+
+static struct dm_bufio_client *to_bufio(struct dm_block_manager *bm)
+{
+ return (struct dm_bufio_client *) bm;
+}
+
+dm_block_t dm_block_location(struct dm_block *b)
+{
+ return dm_bufio_get_block_number(to_buffer(b));
+}
+EXPORT_SYMBOL_GPL(dm_block_location);
+
+void *dm_block_data(struct dm_block *b)
+{
+ return dm_bufio_get_block_data(to_buffer(b));
+}
+EXPORT_SYMBOL_GPL(dm_block_data);
+
+struct buffer_aux {
+ struct dm_block_validator *validator;
+ struct block_lock lock;
+ int write_locked;
+};
+
+static void dm_block_manager_alloc_callback(struct dm_buffer *buf)
+{
+ struct buffer_aux *aux = dm_bufio_get_aux_data(buf);
+ aux->validator = NULL;
+ bl_init(&aux->lock);
+}
+
+static void dm_block_manager_write_callback(struct dm_buffer *buf)
+{
+ struct buffer_aux *aux = dm_bufio_get_aux_data(buf);
+ if (aux->validator) {
+ aux->validator->prepare_for_write(aux->validator, (struct dm_block *) buf,
+ dm_bufio_get_block_size(dm_bufio_get_client(buf)));
+ }
+}
+
+/*----------------------------------------------------------------
+ * Public interface
+ *--------------------------------------------------------------*/
+struct dm_block_manager *dm_block_manager_create(struct block_device *bdev,
+ unsigned block_size,
+ unsigned cache_size,
+ unsigned max_held_per_thread)
+{
+ return (struct dm_block_manager *)
+ dm_bufio_client_create(bdev, block_size, max_held_per_thread,
+ sizeof(struct buffer_aux),
+ dm_block_manager_alloc_callback,
+ dm_block_manager_write_callback);
+}
+EXPORT_SYMBOL_GPL(dm_block_manager_create);
+
+void dm_block_manager_destroy(struct dm_block_manager *bm)
+{
+ return dm_bufio_client_destroy(to_bufio(bm));
+}
+EXPORT_SYMBOL_GPL(dm_block_manager_destroy);
+
+unsigned dm_bm_block_size(struct dm_block_manager *bm)
+{
+ return dm_bufio_get_block_size(to_bufio(bm));
+}
+EXPORT_SYMBOL_GPL(dm_bm_block_size);
+
+dm_block_t dm_bm_nr_blocks(struct dm_block_manager *bm)
+{
+ return dm_bufio_get_device_size(to_bufio(bm));
+}
+
+static int dm_bm_validate_buffer(struct dm_block_manager *bm,
+ struct dm_buffer *buf,
+ struct buffer_aux *aux,
+ struct dm_block_validator *v)
+{
+ if (unlikely(!aux->validator)) {
+ int r;
+ if (!v)
+ return 0;
+ r = v->check(v, (struct dm_block *) buf, dm_bufio_get_block_size(to_bufio(bm)));
+ if (unlikely(r))
+ return r;
+ aux->validator = v;
+ } else {
+ if (unlikely(aux->validator != v)) {
+ DMERR("validator mismatch (old=%s vs new=%s) for block %llu",
+ aux->validator->name, v ? v->name : "NULL",
+ (unsigned long long)
+ dm_bufio_get_block_number(buf));
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+int dm_bm_read_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ struct buffer_aux *aux;
+ void *p;
+ int r;
+
+ p = dm_bufio_read(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_read(&aux->lock);
+ if (unlikely(r)) {
+ dm_bufio_release(to_buffer(*result));
+ report_recursive_bug(b, r);
+ return r;
+ }
+
+ aux->write_locked = 0;
+
+ r = dm_bm_validate_buffer(bm, to_buffer(*result), aux, v);
+ if (unlikely(r)) {
+ bl_up_read(&aux->lock);
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_bm_read_lock);
+
+int dm_bm_write_lock(struct dm_block_manager *bm,
+ dm_block_t b, struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ struct buffer_aux *aux;
+ void *p;
+ int r;
+
+ p = dm_bufio_read(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_write(&aux->lock);
+ if (r) {
+ dm_bufio_release(to_buffer(*result));
+ report_recursive_bug(b, r);
+ return r;
+ }
+
+ aux->write_locked = 1;
+
+ r = dm_bm_validate_buffer(bm, to_buffer(*result), aux, v);
+ if (unlikely(r)) {
+ bl_up_write(&aux->lock);
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_bm_write_lock);
+
+int dm_bm_read_try_lock(struct dm_block_manager *bm,
+ dm_block_t b, struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ struct buffer_aux *aux;
+ void *p;
+ int r;
+
+ p = dm_bufio_get(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+ if (unlikely(!p))
+ return -EWOULDBLOCK;
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_read_nonblock(&aux->lock);
+ if (r < 0) {
+ dm_bufio_release(to_buffer(*result));
+ report_recursive_bug(b, r);
+ return r;
+ }
+ aux->write_locked = 0;
+
+ r = dm_bm_validate_buffer(bm, to_buffer(*result), aux, v);
+ if (unlikely(r)) {
+ bl_up_read(&aux->lock);
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ return 0;
+}
+
+int dm_bm_write_lock_zero(struct dm_block_manager *bm,
+ dm_block_t b, struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ int r;
+ struct buffer_aux *aux;
+ void *p;
+
+ p = dm_bufio_new(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+
+ memset(p, 0, dm_bm_block_size(bm));
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_write(&aux->lock);
+ if (r) {
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ aux->write_locked = 1;
+ aux->validator = v;
+
+ return 0;
+}
+
+int dm_bm_unlock(struct dm_block *b)
+{
+ struct buffer_aux *aux;
+ aux = dm_bufio_get_aux_data(to_buffer(b));
+
+ if (aux->write_locked) {
+ dm_bufio_mark_buffer_dirty(to_buffer(b));
+ bl_up_write(&aux->lock);
+ } else
+ bl_up_read(&aux->lock);
+
+ dm_bufio_release(to_buffer(b));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_bm_unlock);
+
+int dm_bm_unlock_move(struct dm_block *b, dm_block_t n)
+{
+ struct buffer_aux *aux;
+
+ aux = dm_bufio_get_aux_data(to_buffer(b));
+
+ if (aux->write_locked) {
+ dm_bufio_mark_buffer_dirty(to_buffer(b));
+ bl_up_write(&aux->lock);
+ } else
+ bl_up_read(&aux->lock);
+
+ dm_bufio_release_move(to_buffer(b), n);
+ return 0;
+}
+
+int dm_bm_flush_and_unlock(struct dm_block_manager *bm,
+ struct dm_block *superblock)
+{
+ int r;
+
+ r = dm_bufio_write_dirty_buffers(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+ r = dm_bufio_issue_flush(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+
+ dm_bm_unlock(superblock);
+
+ r = dm_bufio_write_dirty_buffers(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+ r = dm_bufio_issue_flush(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+
+ return 0;
+}
+
+u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor)
+{
+ return crc32c(~(u32) 0, data, len) ^ init_xor;
+}
+EXPORT_SYMBOL_GPL(dm_bm_checksum);
+
+/*----------------------------------------------------------------*/
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joe Thornber <dm-devel@redhat.com>");
+MODULE_DESCRIPTION("Immutable metadata library for dm");
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-block-manager.h b/drivers/md/persistent-data/dm-block-manager.h
new file mode 100644
index 0000000..924833d
--- /dev/null
+++ b/drivers/md/persistent-data/dm-block-manager.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_BLOCK_MANAGER_H
+#define _LINUX_DM_BLOCK_MANAGER_H
+
+#include <linux/types.h>
+#include <linux/blkdev.h>
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Block number.
+ */
+typedef uint64_t dm_block_t;
+struct dm_block;
+
+dm_block_t dm_block_location(struct dm_block *b);
+void *dm_block_data(struct dm_block *b);
+
+/*----------------------------------------------------------------*/
+
+/*
+ * @name should be a unique identifier for the block manager, no longer
+ * than 32 chars.
+ *
+ * @max_held_per_thread should be the maximum number of locks, read or
+ * write, that an individual thread holds at any one time.
+ */
+struct dm_block_manager;
+struct dm_block_manager *dm_block_manager_create(
+ struct block_device *bdev, unsigned block_size,
+ unsigned cache_size, unsigned max_held_per_thread);
+void dm_block_manager_destroy(struct dm_block_manager *bm);
+
+unsigned dm_bm_block_size(struct dm_block_manager *bm);
+dm_block_t dm_bm_nr_blocks(struct dm_block_manager *bm);
+
+/*----------------------------------------------------------------*/
+
+/*
+ * The validator allows the caller to verify newly-read data and modify
+ * the data just before writing, e.g. to calculate checksums. It's
+ * important to be consistent with your use of validators. The only time
+ * you can change validators is if you call dm_bm_write_lock_zero.
+ */
+struct dm_block_validator {
+ const char *name;
+ void (*prepare_for_write)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
+
+ /*
+ * Return 0 if the checksum is valid or < 0 on error.
+ */
+ int (*check)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * You can have multiple concurrent readers or a single writer holding a
+ * block lock.
+ */
+
+/*
+ * dm_bm_lock() locks a block and returns through @result a pointer to
+ * memory that holds a copy of that block. If you have write-locked the
+ * block then any changes you make to memory pointed to by @result will be
+ * written back to the disk sometime after dm_bm_unlock is called.
+ */
+int dm_bm_read_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+int dm_bm_write_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+/*
+ * The *_try_lock variants return -EWOULDBLOCK if the block isn't
+ * available immediately.
+ */
+int dm_bm_read_try_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+/*
+ * Use dm_bm_write_lock_zero() when you know you're going to
+ * overwrite the block completely. It saves a disk read.
+ */
+int dm_bm_write_lock_zero(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+int dm_bm_unlock(struct dm_block *b);
+
+/*
+ * An optimisation; we often want to copy a block's contents to a new
+ * block. eg, as part of the shadowing operation. It's far better for
+ * bufio to do this move behind the scenes than hold 2 locks and memcpy the
+ * data.
+ */
+int dm_bm_unlock_move(struct dm_block *b, dm_block_t n);
+
+/*
+ * It's a common idiom to have a superblock that should be committed last.
+ *
+ * @superblock should be write-locked on entry. It will be unlocked during
+ * this function. All dirty blocks are guaranteed to be written and flushed
+ * before the superblock.
+ *
+ * This method always blocks.
+ */
+int dm_bm_flush_and_unlock(struct dm_block_manager *bm,
+ struct dm_block *superblock);
+
+u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor);
+
+/*----------------------------------------------------------------*/
+
+#endif /* _LINUX_DM_BLOCK_MANAGER_H */
diff --git a/drivers/md/persistent-data/dm-btree-internal.h b/drivers/md/persistent-data/dm-btree-internal.h
new file mode 100644
index 0000000..d279c76
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree-internal.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_BTREE_INTERNAL_H
+#define DM_BTREE_INTERNAL_H
+
+#include "dm-btree.h"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * We'll need 2 accessor functions for n->csum and n->blocknr
+ * to support dm-btree-spine.c in that case.
+ */
+
+enum node_flags {
+ INTERNAL_NODE = 1,
+ LEAF_NODE = 1 << 1
+};
+
+/*
+ * Every btree node begins with this structure. Make sure it's a multiple
+ * of 8-bytes in size, otherwise the 64bit keys will be mis-aligned.
+ */
+struct node_header {
+ __le32 csum;
+ __le32 flags;
+ __le64 blocknr; /* Block this node is supposed to live in. */
+
+ __le32 nr_entries;
+ __le32 max_entries;
+ __le32 value_size;
+ __le32 padding;
+} __packed;
+
+struct node {
+ struct node_header header;
+ __le64 keys[0];
+} __packed;
+
+
+void inc_children(struct dm_transaction_manager *tm, struct node *n,
+ struct dm_btree_value_type *vt);
+
+int new_block(struct dm_btree_info *info, struct dm_block **result);
+int unlock_block(struct dm_btree_info *info, struct dm_block *b);
+
+/*
+ * Spines keep track of the rolling locks. There are 2 variants, read-only
+ * and one that uses shadowing. These are separate structs to allow the
+ * type checker to spot misuse, for example accidentally calling read_lock
+ * on a shadow spine.
+ */
+struct ro_spine {
+ struct dm_btree_info *info;
+
+ int count;
+ struct dm_block *nodes[2];
+};
+
+void init_ro_spine(struct ro_spine *s, struct dm_btree_info *info);
+int exit_ro_spine(struct ro_spine *s);
+int ro_step(struct ro_spine *s, dm_block_t new_child);
+struct node *ro_node(struct ro_spine *s);
+
+struct shadow_spine {
+ struct dm_btree_info *info;
+
+ int count;
+ struct dm_block *nodes[2];
+
+ dm_block_t root;
+};
+
+void init_shadow_spine(struct shadow_spine *s, struct dm_btree_info *info);
+int exit_shadow_spine(struct shadow_spine *s);
+
+int shadow_step(struct shadow_spine *s, dm_block_t b,
+ struct dm_btree_value_type *vt);
+
+/*
+ * The spine must have at least one entry before calling this.
+ */
+struct dm_block *shadow_current(struct shadow_spine *s);
+
+/*
+ * The spine must have at least two entries before calling this.
+ */
+struct dm_block *shadow_parent(struct shadow_spine *s);
+
+int shadow_has_parent(struct shadow_spine *s);
+
+int shadow_root(struct shadow_spine *s);
+
+/*
+ * Some inlines.
+ */
+static inline __le64 *key_ptr(struct node *n, uint32_t index)
+{
+ return n->keys + index;
+}
+
+static inline void *value_base(struct node *n)
+{
+ return &n->keys[le32_to_cpu(n->header.max_entries)];
+}
+
+/*
+ * FIXME: Now that value size is stored in node we don't need the third parm.
+ */
+static inline void *value_ptr(struct node *n, uint32_t index, size_t value_size)
+{
+ BUG_ON(value_size != le32_to_cpu(n->header.value_size));
+ return value_base(n) + (value_size * index);
+}
+
+/*
+ * Assumes the values are suitably-aligned and converts to core format.
+ */
+static inline uint64_t value64(struct node *n, uint32_t index)
+{
+ __le64 *values_le = value_base(n);
+
+ return le64_to_cpu(values_le[index]);
+}
+
+/*
+ * Searching for a key within a single node.
+ */
+int lower_bound(struct node *n, uint64_t key);
+
+extern struct dm_block_validator btree_node_validator;
+
+#endif /* DM_BTREE_INTERNAL_H */
diff --git a/drivers/md/persistent-data/dm-btree-remove.c b/drivers/md/persistent-data/dm-btree-remove.c
new file mode 100644
index 0000000..65fd85e
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree-remove.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-btree.h"
+#include "dm-btree-internal.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/module.h>
+
+/*
+ * Removing an entry from a btree
+ * ==============================
+ *
+ * A very important constraint for our btree is that no node, except the
+ * root, may have fewer than a certain number of entries.
+ * (MIN_ENTRIES <= nr_entries <= MAX_ENTRIES).
+ *
+ * Ensuring this is complicated by the way we want to only ever hold the
+ * locks on 2 nodes concurrently, and only change nodes in a top to bottom
+ * fashion.
+ *
+ * Each node may have a left or right sibling. When decending the spine,
+ * if a node contains only MIN_ENTRIES then we try and increase this to at
+ * least MIN_ENTRIES + 1. We do this in the following ways:
+ *
+ * [A] No siblings => this can only happen if the node is the root, in which
+ * case we copy the childs contents over the root.
+ *
+ * [B] No left sibling
+ * ==> rebalance(node, right sibling)
+ *
+ * [C] No right sibling
+ * ==> rebalance(left sibling, node)
+ *
+ * [D] Both siblings, total_entries(left, node, right) <= DEL_THRESHOLD
+ * ==> delete node adding it's contents to left and right
+ *
+ * [E] Both siblings, total_entries(left, node, right) > DEL_THRESHOLD
+ * ==> rebalance(left, node, right)
+ *
+ * After these operations it's possible that the our original node no
+ * longer contains the desired sub tree. For this reason this rebalancing
+ * is performed on the children of the current node. This also avoids
+ * having a special case for the root.
+ *
+ * Once this rebalancing has occurred we can then step into the child node
+ * for internal nodes. Or delete the entry for leaf nodes.
+ */
+
+/*
+ * Some little utilities for moving node data around.
+ */
+static void node_shift(struct node *n, int shift)
+{
+ uint32_t nr_entries = le32_to_cpu(n->header.nr_entries);
+ uint32_t value_size = le32_to_cpu(n->header.value_size);
+
+ if (shift < 0) {
+ shift = -shift;
+ BUG_ON(shift > nr_entries);
+ BUG_ON((void *) key_ptr(n, shift) >= value_ptr(n, shift, value_size));
+ memmove(key_ptr(n, 0),
+ key_ptr(n, shift),
+ (nr_entries - shift) * sizeof(__le64));
+ memmove(value_ptr(n, 0, value_size),
+ value_ptr(n, shift, value_size),
+ (nr_entries - shift) * value_size);
+ } else {
+ BUG_ON(nr_entries + shift > le32_to_cpu(n->header.max_entries));
+ memmove(key_ptr(n, shift),
+ key_ptr(n, 0),
+ nr_entries * sizeof(__le64));
+ memmove(value_ptr(n, shift, value_size),
+ value_ptr(n, 0, value_size),
+ nr_entries * value_size);
+ }
+}
+
+static void node_copy(struct node *left, struct node *right, int shift)
+{
+ uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
+ uint32_t value_size = le32_to_cpu(left->header.value_size);
+ BUG_ON(value_size != le32_to_cpu(right->header.value_size));
+
+ if (shift < 0) {
+ shift = -shift;
+ BUG_ON(nr_left + shift > le32_to_cpu(left->header.max_entries));
+ memcpy(key_ptr(left, nr_left),
+ key_ptr(right, 0),
+ shift * sizeof(__le64));
+ memcpy(value_ptr(left, nr_left, value_size),
+ value_ptr(right, 0, value_size),
+ shift * value_size);
+ } else {
+ BUG_ON(shift > le32_to_cpu(right->header.max_entries));
+ memcpy(key_ptr(right, 0),
+ key_ptr(left, nr_left - shift),
+ shift * sizeof(__le64));
+ memcpy(value_ptr(right, 0, value_size),
+ value_ptr(left, nr_left - shift, value_size),
+ shift * value_size);
+ }
+}
+
+/*
+ * Delete a specific entry from a leaf node.
+ */
+static void delete_at(struct node *n, unsigned index)
+{
+ unsigned nr_entries = le32_to_cpu(n->header.nr_entries);
+ unsigned nr_to_copy = nr_entries - (index + 1);
+ uint32_t value_size = le32_to_cpu(n->header.value_size);
+ BUG_ON(index >= nr_entries);
+
+ if (nr_to_copy) {
+ memmove(key_ptr(n, index),
+ key_ptr(n, index + 1),
+ nr_to_copy * sizeof(__le64));
+
+ memmove(value_ptr(n, index, value_size),
+ value_ptr(n, index + 1, value_size),
+ nr_to_copy * value_size);
+ }
+
+ n->header.nr_entries = cpu_to_le32(nr_entries - 1);
+}
+
+static unsigned del_threshold(struct node *n)
+{
+ return le32_to_cpu(n->header.max_entries) / 3;
+}
+
+static unsigned merge_threshold(struct node *n)
+{
+ /*
+ * The extra one is because we know we're potentially going to
+ * delete an entry.
+ */
+ return 2 * (le32_to_cpu(n->header.max_entries) / 3) + 1;
+}
+
+struct child {
+ unsigned index;
+ struct dm_block *block;
+ struct node *n;
+};
+
+static struct dm_btree_value_type le64_type = {
+ .context = NULL,
+ .size = sizeof(__le64),
+ .inc = NULL,
+ .dec = NULL,
+ .equal = NULL
+};
+
+static int init_child(struct dm_btree_info *info, struct node *parent,
+ unsigned index, struct child *result)
+{
+ int r, inc;
+ dm_block_t root;
+
+ result->index = index;
+ root = value64(parent, index);
+
+ r = dm_tm_shadow_block(info->tm, root, &btree_node_validator,
+ &result->block, &inc);
+ if (r)
+ return r;
+
+ result->n = dm_block_data(result->block);
+
+ if (inc)
+ inc_children(info->tm, result->n, &le64_type);
+
+ *((__le64 *) value_ptr(parent, index, sizeof(__le64))) =
+ cpu_to_le64(dm_block_location(result->block));
+
+ return 0;
+}
+
+static int exit_child(struct dm_btree_info *info, struct child *c)
+{
+ return dm_tm_unlock(info->tm, c->block);
+}
+
+static void shift(struct node *left, struct node *right, int count)
+{
+ if (!count)
+ return;
+
+ if (count > 0) {
+ node_shift(right, count);
+ node_copy(left, right, count);
+ } else {
+ node_copy(left, right, count);
+ node_shift(right, count);
+ }
+
+ left->header.nr_entries =
+ cpu_to_le32(le32_to_cpu(left->header.nr_entries) - count);
+ BUG_ON(le32_to_cpu(left->header.nr_entries) > le32_to_cpu(left->header.max_entries));
+
+ right->header.nr_entries =
+ cpu_to_le32(le32_to_cpu(right->header.nr_entries) + count);
+ BUG_ON(le32_to_cpu(right->header.nr_entries) > le32_to_cpu(right->header.max_entries));
+}
+
+static void __rebalance2(struct dm_btree_info *info, struct node *parent,
+ struct child *l, struct child *r)
+{
+ struct node *left = l->n;
+ struct node *right = r->n;
+ uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
+ uint32_t nr_right = le32_to_cpu(right->header.nr_entries);
+
+ if (nr_left + nr_right <= merge_threshold(left)) {
+ /*
+ * Merge
+ */
+ node_copy(left, right, -nr_right);
+ left->header.nr_entries = cpu_to_le32(nr_left + nr_right);
+ delete_at(parent, r->index);
+
+ /*
+ * We need to decrement the right block, but not it's
+ * children, since they're still referenced by left.
+ */
+ dm_tm_dec(info->tm, dm_block_location(r->block));
+ } else {
+ /*
+ * Rebalance.
+ */
+ unsigned target_left = (nr_left + nr_right) / 2;
+ unsigned shift_ = nr_left - target_left;
+ BUG_ON(le32_to_cpu(left->header.max_entries) <= nr_left - shift_);
+ BUG_ON(le32_to_cpu(right->header.max_entries) <= nr_right + shift_);
+ shift(left, right, nr_left - target_left);
+ *key_ptr(parent, r->index) = right->keys[0];
+ }
+}
+
+static int rebalance2(struct shadow_spine *s, struct dm_btree_info *info,
+ unsigned left_index)
+{
+ int r;
+ struct node *parent;
+ struct child left, right;
+
+ parent = dm_block_data(shadow_current(s));
+
+ r = init_child(info, parent, left_index, &left);
+ if (r)
+ return r;
+
+ r = init_child(info, parent, left_index + 1, &right);
+ if (r) {
+ exit_child(info, &left);
+ return r;
+ }
+
+ __rebalance2(info, parent, &left, &right);
+
+ r = exit_child(info, &left);
+ if (r) {
+ exit_child(info, &right);
+ return r;
+ }
+
+ return exit_child(info, &right);
+}
+
+static void __rebalance3(struct dm_btree_info *info, struct node *parent,
+ struct child *l, struct child *c, struct child *r)
+{
+ struct node *left = l->n;
+ struct node *center = c->n;
+ struct node *right = r->n;
+
+ uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
+ uint32_t nr_center = le32_to_cpu(center->header.nr_entries);
+ uint32_t nr_right = le32_to_cpu(right->header.nr_entries);
+ uint32_t max_entries = le32_to_cpu(left->header.max_entries);
+
+ unsigned target;
+
+ BUG_ON(left->header.max_entries != center->header.max_entries);
+ BUG_ON(center->header.max_entries != right->header.max_entries);
+
+ if (((nr_left + nr_center + nr_right) / 2) < merge_threshold(center)) {
+ /*
+ * Delete center node:
+ *
+ * We dump as many entries from center as possible into
+ * left, then the rest in right, then rebalance2. This
+ * wastes some cpu, but I want something simple atm.
+ */
+ unsigned shift = min(max_entries - nr_left, nr_center);
+
+ BUG_ON(nr_left + shift > max_entries);
+ node_copy(left, center, -shift);
+ left->header.nr_entries = cpu_to_le32(nr_left + shift);
+
+ if (shift != nr_center) {
+ shift = nr_center - shift;
+ BUG_ON((nr_right + shift) >= max_entries);
+ node_shift(right, shift);
+ node_copy(center, right, shift);
+ right->header.nr_entries = cpu_to_le32(nr_right + shift);
+ }
+ *key_ptr(parent, r->index) = right->keys[0];
+
+ delete_at(parent, c->index);
+ r->index--;
+
+ dm_tm_dec(info->tm, dm_block_location(c->block));
+ __rebalance2(info, parent, l, r);
+
+ return;
+ }
+
+ /*
+ * Rebalance
+ */
+ target = (nr_left + nr_center + nr_right) / 3;
+ BUG_ON(target > max_entries);
+
+ /*
+ * Adjust the left node
+ */
+ shift(left, center, nr_left - target);
+
+ /*
+ * Adjust the right node
+ */
+ shift(center, right, target - nr_right);
+ *key_ptr(parent, c->index) = center->keys[0];
+ *key_ptr(parent, r->index) = right->keys[0];
+}
+
+static int rebalance3(struct shadow_spine *s, struct dm_btree_info *info,
+ unsigned left_index)
+{
+ int r;
+ struct node *parent = dm_block_data(shadow_current(s));
+ struct child left, center, right;
+
+ /*
+ * FIXME: fill out an array?
+ */
+ r = init_child(info, parent, left_index, &left);
+ if (r)
+ return r;
+
+ r = init_child(info, parent, left_index + 1, ¢er);
+ if (r) {
+ exit_child(info, &left);
+ return r;
+ }
+
+ r = init_child(info, parent, left_index + 2, &right);
+ if (r) {
+ exit_child(info, &left);
+ exit_child(info, ¢er);
+ return r;
+ }
+
+ __rebalance3(info, parent, &left, ¢er, &right);
+
+ r = exit_child(info, &left);
+ if (r) {
+ exit_child(info, ¢er);
+ exit_child(info, &right);
+ return r;
+ }
+
+ r = exit_child(info, ¢er);
+ if (r) {
+ exit_child(info, &right);
+ return r;
+ }
+
+ r = exit_child(info, &right);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int get_nr_entries(struct dm_transaction_manager *tm,
+ dm_block_t b, uint32_t *result)
+{
+ int r;
+ struct dm_block *block;
+ struct node *n;
+
+ r = dm_tm_read_lock(tm, b, &btree_node_validator, &block);
+ if (r)
+ return r;
+
+ n = dm_block_data(block);
+ *result = le32_to_cpu(n->header.nr_entries);
+
+ return dm_tm_unlock(tm, block);
+}
+
+static int rebalance_children(struct shadow_spine *s,
+ struct dm_btree_info *info, uint64_t key)
+{
+ int i, r, has_left_sibling, has_right_sibling;
+ uint32_t child_entries;
+ struct node *n;
+
+ n = dm_block_data(shadow_current(s));
+
+ if (le32_to_cpu(n->header.nr_entries) == 1) {
+ struct dm_block *child;
+ dm_block_t b = value64(n, 0);
+
+ r = dm_tm_read_lock(info->tm, b, &btree_node_validator, &child);
+ if (r)
+ return r;
+
+ memcpy(n, dm_block_data(child),
+ dm_bm_block_size(dm_tm_get_bm(info->tm)));
+ r = dm_tm_unlock(info->tm, child);
+ if (r)
+ return r;
+
+ dm_tm_dec(info->tm, dm_block_location(child));
+ return 0;
+ }
+
+ i = lower_bound(n, key);
+ if (i < 0)
+ return -ENODATA;
+
+ r = get_nr_entries(info->tm, value64(n, i), &child_entries);
+ if (r)
+ return r;
+
+ if (child_entries > del_threshold(n))
+ return 0;
+
+ has_left_sibling = i > 0;
+ has_right_sibling = i < (le32_to_cpu(n->header.nr_entries) - 1);
+
+ if (!has_left_sibling)
+ r = rebalance2(s, info, i);
+
+ else if (!has_right_sibling)
+ r = rebalance2(s, info, i - 1);
+
+ else
+ r = rebalance3(s, info, i - 1);
+
+ return r;
+}
+
+static int do_leaf(struct node *n, uint64_t key, unsigned *index)
+{
+ int i = lower_bound(n, key);
+
+ if ((i < 0) ||
+ (i >= le32_to_cpu(n->header.nr_entries)) ||
+ (le64_to_cpu(n->keys[i]) != key))
+ return -ENODATA;
+
+ *index = i;
+
+ return 0;
+}
+
+/*
+ * Prepares for removal from one level of the hierarchy. The caller must
+ * call delete_at() to remove the entry at index.
+ */
+static int remove_raw(struct shadow_spine *s, struct dm_btree_info *info,
+ struct dm_btree_value_type *vt, dm_block_t root,
+ uint64_t key, unsigned *index)
+{
+ int i = *index, r;
+ struct node *n;
+
+ for (;;) {
+ r = shadow_step(s, root, vt);
+ if (r < 0)
+ break;
+
+ /*
+ * We have to patch up the parent node, ugly, but I don't
+ * see a way to do this automatically as part of the spine
+ * op.
+ */
+ if (shadow_has_parent(s)) {
+ __le64 location = cpu_to_le64(dm_block_location(shadow_current(s)));
+ memcpy(value_ptr(dm_block_data(shadow_parent(s)), i, sizeof(__le64)),
+ &location, sizeof(__le64));
+ }
+
+ n = dm_block_data(shadow_current(s));
+
+ if (le32_to_cpu(n->header.flags) & LEAF_NODE)
+ return do_leaf(n, key, index);
+
+ r = rebalance_children(s, info, key);
+ if (r)
+ break;
+
+ n = dm_block_data(shadow_current(s));
+ if (le32_to_cpu(n->header.flags) & LEAF_NODE)
+ return do_leaf(n, key, index);
+
+ i = lower_bound(n, key);
+
+ /*
+ * We know the key is present, or else
+ * rebalance_children would have returned
+ * -ENODATA
+ */
+ root = value64(n, i);
+ }
+
+ return r;
+}
+
+int dm_btree_remove(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, dm_block_t *new_root)
+{
+ unsigned level, last_level = info->levels - 1;
+ int index = 0, r = 0;
+ struct shadow_spine spine;
+ struct node *n;
+
+ init_shadow_spine(&spine, info);
+ for (level = 0; level < info->levels; level++) {
+ r = remove_raw(&spine, info,
+ (level == last_level ?
+ &info->value_type : &le64_type),
+ root, keys[level], (unsigned *)&index);
+ if (r < 0)
+ break;
+
+ n = dm_block_data(shadow_current(&spine));
+ if (level != last_level) {
+ root = value64(n, index);
+ continue;
+ }
+
+ BUG_ON(index < 0 || index >= le32_to_cpu(n->header.nr_entries));
+
+ if (info->value_type.dec)
+ info->value_type.dec(info->value_type.context,
+ value_ptr(n, index, info->value_type.size));
+
+ delete_at(n, index);
+ }
+
+ *new_root = shadow_root(&spine);
+ exit_shadow_spine(&spine);
+
+ return r;
+}
+EXPORT_SYMBOL_GPL(dm_btree_remove);
diff --git a/drivers/md/persistent-data/dm-btree-spine.c b/drivers/md/persistent-data/dm-btree-spine.c
new file mode 100644
index 0000000..d9a7912
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree-spine.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-btree-internal.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "btree spine"
+
+/*----------------------------------------------------------------*/
+
+#define BTREE_CSUM_XOR 121107
+
+static int node_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size);
+
+static void node_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct node *n = dm_block_data(b);
+ struct node_header *h = &n->header;
+
+ h->blocknr = cpu_to_le64(dm_block_location(b));
+ h->csum = cpu_to_le32(dm_bm_checksum(&h->flags,
+ block_size - sizeof(__le32),
+ BTREE_CSUM_XOR));
+
+ BUG_ON(node_check(v, b, 4096));
+}
+
+static int node_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct node *n = dm_block_data(b);
+ struct node_header *h = &n->header;
+ size_t value_size;
+ __le32 csum_disk;
+ uint32_t flags;
+
+ if (dm_block_location(b) != le64_to_cpu(h->blocknr)) {
+ DMERR("node_check failed blocknr %llu wanted %llu",
+ le64_to_cpu(h->blocknr), dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ csum_disk = cpu_to_le32(dm_bm_checksum(&h->flags,
+ block_size - sizeof(__le32),
+ BTREE_CSUM_XOR));
+ if (csum_disk != h->csum) {
+ DMERR("node_check failed csum %u wanted %u",
+ le32_to_cpu(csum_disk), le32_to_cpu(h->csum));
+ return -EILSEQ;
+ }
+
+ value_size = le32_to_cpu(h->value_size);
+
+ if (sizeof(struct node_header) +
+ (sizeof(__le64) + value_size) * le32_to_cpu(h->max_entries) > block_size) {
+ DMERR("node_check failed: max_entries too large");
+ return -EILSEQ;
+ }
+
+ if (le32_to_cpu(h->nr_entries) > le32_to_cpu(h->max_entries)) {
+ DMERR("node_check failed, too many entries");
+ return -EILSEQ;
+ }
+
+ /*
+ * The node must be either INTERNAL or LEAF.
+ */
+ flags = le32_to_cpu(h->flags);
+ if (!(flags & INTERNAL_NODE) && !(flags & LEAF_NODE)) {
+ DMERR("node_check failed, node is neither INTERNAL or LEAF");
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+struct dm_block_validator btree_node_validator = {
+ .name = "btree_node",
+ .prepare_for_write = node_prepare_for_write,
+ .check = node_check
+};
+
+/*----------------------------------------------------------------*/
+
+static int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
+ struct dm_block **result)
+{
+ return dm_tm_read_lock(info->tm, b, &btree_node_validator, result);
+}
+
+static int bn_shadow(struct dm_btree_info *info, dm_block_t orig,
+ struct dm_btree_value_type *vt,
+ struct dm_block **result)
+{
+ int r, inc;
+
+ r = dm_tm_shadow_block(info->tm, orig, &btree_node_validator,
+ result, &inc);
+ if (!r && inc)
+ inc_children(info->tm, dm_block_data(*result), vt);
+
+ return r;
+}
+
+int new_block(struct dm_btree_info *info, struct dm_block **result)
+{
+ return dm_tm_new_block(info->tm, &btree_node_validator, result);
+}
+
+int unlock_block(struct dm_btree_info *info, struct dm_block *b)
+{
+ return dm_tm_unlock(info->tm, b);
+}
+
+/*----------------------------------------------------------------*/
+
+void init_ro_spine(struct ro_spine *s, struct dm_btree_info *info)
+{
+ s->info = info;
+ s->count = 0;
+ s->nodes[0] = NULL;
+ s->nodes[1] = NULL;
+}
+
+int exit_ro_spine(struct ro_spine *s)
+{
+ int r = 0, i;
+
+ for (i = 0; i < s->count; i++) {
+ int r2 = unlock_block(s->info, s->nodes[i]);
+ if (r2 < 0)
+ r = r2;
+ }
+
+ return r;
+}
+
+int ro_step(struct ro_spine *s, dm_block_t new_child)
+{
+ int r;
+
+ if (s->count == 2) {
+ r = unlock_block(s->info, s->nodes[0]);
+ if (r < 0)
+ return r;
+ s->nodes[0] = s->nodes[1];
+ s->count--;
+ }
+
+ r = bn_read_lock(s->info, new_child, s->nodes + s->count);
+ if (!r)
+ s->count++;
+
+ return r;
+}
+
+struct node *ro_node(struct ro_spine *s)
+{
+ struct dm_block *block;
+
+ BUG_ON(!s->count);
+ block = s->nodes[s->count - 1];
+
+ return dm_block_data(block);
+}
+
+/*----------------------------------------------------------------*/
+
+void init_shadow_spine(struct shadow_spine *s, struct dm_btree_info *info)
+{
+ s->info = info;
+ s->count = 0;
+}
+
+int exit_shadow_spine(struct shadow_spine *s)
+{
+ int r = 0, i;
+
+ for (i = 0; i < s->count; i++) {
+ int r2 = unlock_block(s->info, s->nodes[i]);
+ if (r2 < 0)
+ r = r2;
+ }
+
+ return r;
+}
+
+int shadow_step(struct shadow_spine *s, dm_block_t b,
+ struct dm_btree_value_type *vt)
+{
+ int r;
+
+ if (s->count == 2) {
+ r = unlock_block(s->info, s->nodes[0]);
+ if (r < 0)
+ return r;
+ s->nodes[0] = s->nodes[1];
+ s->count--;
+ }
+
+ r = bn_shadow(s->info, b, vt, s->nodes + s->count);
+ if (!r) {
+ if (!s->count)
+ s->root = dm_block_location(s->nodes[0]);
+
+ s->count++;
+ }
+
+ return r;
+}
+
+struct dm_block *shadow_current(struct shadow_spine *s)
+{
+ BUG_ON(!s->count);
+
+ return s->nodes[s->count - 1];
+}
+
+struct dm_block *shadow_parent(struct shadow_spine *s)
+{
+ BUG_ON(s->count != 2);
+
+ return s->count == 2 ? s->nodes[0] : NULL;
+}
+
+int shadow_has_parent(struct shadow_spine *s)
+{
+ return s->count >= 2;
+}
+
+int shadow_root(struct shadow_spine *s)
+{
+ return s->root;
+}
diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c
new file mode 100644
index 0000000..e0638be
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -0,0 +1,805 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-btree-internal.h"
+#include "dm-space-map.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/module.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "btree"
+
+/*----------------------------------------------------------------
+ * Array manipulation
+ *--------------------------------------------------------------*/
+static void memcpy_disk(void *dest, const void *src, size_t len)
+ __dm_written_to_disk(src)
+{
+ memcpy(dest, src, len);
+ __dm_unbless_for_disk(src);
+}
+
+static void array_insert(void *base, size_t elt_size, unsigned nr_elts,
+ unsigned index, void *elt)
+ __dm_written_to_disk(elt)
+{
+ if (index < nr_elts)
+ memmove(base + (elt_size * (index + 1)),
+ base + (elt_size * index),
+ (nr_elts - index) * elt_size);
+
+ memcpy_disk(base + (elt_size * index), elt, elt_size);
+}
+
+/*----------------------------------------------------------------*/
+
+/* makes the assumption that no two keys are the same. */
+static int bsearch(struct node *n, uint64_t key, int want_hi)
+{
+ int lo = -1, hi = le32_to_cpu(n->header.nr_entries);
+
+ while (hi - lo > 1) {
+ int mid = lo + ((hi - lo) / 2);
+ uint64_t mid_key = le64_to_cpu(n->keys[mid]);
+
+ if (mid_key == key)
+ return mid;
+
+ if (mid_key < key)
+ lo = mid;
+ else
+ hi = mid;
+ }
+
+ return want_hi ? hi : lo;
+}
+
+int lower_bound(struct node *n, uint64_t key)
+{
+ return bsearch(n, key, 0);
+}
+
+void inc_children(struct dm_transaction_manager *tm, struct node *n,
+ struct dm_btree_value_type *vt)
+{
+ unsigned i;
+ uint32_t nr_entries = le32_to_cpu(n->header.nr_entries);
+
+ if (le32_to_cpu(n->header.flags) & INTERNAL_NODE)
+ for (i = 0; i < nr_entries; i++)
+ dm_tm_inc(tm, value64(n, i));
+ else if (vt->inc)
+ for (i = 0; i < nr_entries; i++)
+ vt->inc(vt->context,
+ value_ptr(n, i, vt->size));
+}
+
+static int insert_at(size_t value_size, struct node *node, unsigned index,
+ uint64_t key, void *value)
+ __dm_written_to_disk(value)
+{
+ uint32_t nr_entries = le32_to_cpu(node->header.nr_entries);
+ __le64 key_le = cpu_to_le64(key);
+
+ if (index > nr_entries ||
+ index >= le32_to_cpu(node->header.max_entries)) {
+ DMERR("too many entries in btree node for insert");
+ __dm_unbless_for_disk(value);
+ return -ENOMEM;
+ }
+
+ __dm_bless_for_disk(&key_le);
+
+ array_insert(node->keys, sizeof(*node->keys), nr_entries, index, &key_le);
+ array_insert(value_base(node), value_size, nr_entries, index, value);
+ node->header.nr_entries = cpu_to_le32(nr_entries + 1);
+
+ return 0;
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * We want 3n entries (for some n). This works more nicely for repeated
+ * insert remove loops than (2n + 1).
+ */
+static uint32_t calc_max_entries(size_t value_size, size_t block_size)
+{
+ uint32_t total, n;
+ size_t elt_size = sizeof(uint64_t) + value_size; /* key + value */
+
+ block_size -= sizeof(struct node_header);
+ total = block_size / elt_size;
+ n = total / 3; /* rounds down */
+
+ return 3 * n;
+}
+
+int dm_btree_empty(struct dm_btree_info *info, dm_block_t *root)
+{
+ int r;
+ struct dm_block *b;
+ struct node *n;
+ size_t block_size;
+ uint32_t max_entries;
+
+ r = new_block(info, &b);
+ if (r < 0)
+ return r;
+
+ block_size = dm_bm_block_size(dm_tm_get_bm(info->tm));
+ max_entries = calc_max_entries(info->value_type.size, block_size);
+
+ n = dm_block_data(b);
+ memset(n, 0, block_size);
+ n->header.flags = cpu_to_le32(LEAF_NODE);
+ n->header.nr_entries = cpu_to_le32(0);
+ n->header.max_entries = cpu_to_le32(max_entries);
+ n->header.value_size = cpu_to_le32(info->value_type.size);
+
+ *root = dm_block_location(b);
+ return unlock_block(info, b);
+}
+EXPORT_SYMBOL_GPL(dm_btree_empty);
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Deletion uses a recursive algorithm, since we have limited stack space
+ * we explicitly manage our own stack on the heap.
+ */
+#define MAX_SPINE_DEPTH 64
+struct frame {
+ struct dm_block *b;
+ struct node *n;
+ unsigned level;
+ unsigned nr_children;
+ unsigned current_child;
+};
+
+struct del_stack {
+ struct dm_transaction_manager *tm;
+ int top;
+ struct frame spine[MAX_SPINE_DEPTH];
+};
+
+static int top_frame(struct del_stack *s, struct frame **f)
+{
+ if (s->top < 0) {
+ DMERR("btree deletion stack empty");
+ return -EINVAL;
+ }
+
+ *f = s->spine + s->top;
+
+ return 0;
+}
+
+static int unprocessed_frames(struct del_stack *s)
+{
+ return s->top >= 0;
+}
+
+static int push_frame(struct del_stack *s, dm_block_t b, unsigned level)
+{
+ int r;
+ uint32_t ref_count;
+
+ if (s->top >= MAX_SPINE_DEPTH - 1) {
+ DMERR("btree deletion stack out of memory");
+ return -ENOMEM;
+ }
+
+ r = dm_tm_ref(s->tm, b, &ref_count);
+ if (r)
+ return r;
+
+ if (ref_count > 1)
+ /*
+ * This is a shared node, so we can just decrement it's
+ * reference counter and leave the children.
+ */
+ dm_tm_dec(s->tm, b);
+
+ else {
+ struct frame *f = s->spine + ++s->top;
+
+ r = dm_tm_read_lock(s->tm, b, &btree_node_validator, &f->b);
+ if (r) {
+ s->top--;
+ return r;
+ }
+
+ f->n = dm_block_data(f->b);
+ f->level = level;
+ f->nr_children = le32_to_cpu(f->n->header.nr_entries);
+ f->current_child = 0;
+ }
+
+ return 0;
+}
+
+static void pop_frame(struct del_stack *s)
+{
+ struct frame *f = s->spine + s->top--;
+
+ dm_tm_dec(s->tm, dm_block_location(f->b));
+ dm_tm_unlock(s->tm, f->b);
+}
+
+int dm_btree_del(struct dm_btree_info *info, dm_block_t root)
+{
+ int r;
+ struct del_stack *s;
+
+ s = kmalloc(sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ s->tm = info->tm;
+ s->top = -1;
+
+ r = push_frame(s, root, 1);
+ if (r)
+ goto out;
+
+ while (unprocessed_frames(s)) {
+ uint32_t flags;
+ struct frame *f;
+ dm_block_t b;
+
+ r = top_frame(s, &f);
+ if (r)
+ goto out;
+
+ if (f->current_child >= f->nr_children) {
+ pop_frame(s);
+ continue;
+ }
+
+ flags = le32_to_cpu(f->n->header.flags);
+ if (flags & INTERNAL_NODE) {
+ b = value64(f->n, f->current_child);
+ f->current_child++;
+ r = push_frame(s, b, f->level);
+ if (r)
+ goto out;
+
+ } else if (f->level != (info->levels - 1)) {
+ b = value64(f->n, f->current_child);
+ f->current_child++;
+ r = push_frame(s, b, f->level + 1);
+ if (r)
+ goto out;
+
+ } else {
+ if (info->value_type.dec) {
+ unsigned i;
+
+ for (i = 0; i < f->nr_children; i++)
+ info->value_type.dec(info->value_type.context,
+ value_ptr(f->n, i, info->value_type.size));
+ }
+ f->current_child = f->nr_children;
+ }
+ }
+
+out:
+ kfree(s);
+ return r;
+}
+EXPORT_SYMBOL_GPL(dm_btree_del);
+
+/*----------------------------------------------------------------*/
+
+static int btree_lookup_raw(struct ro_spine *s, dm_block_t block, uint64_t key,
+ int (*search_fn)(struct node *, uint64_t),
+ uint64_t *result_key, void *v, size_t value_size)
+{
+ int i, r;
+ uint32_t flags, nr_entries;
+
+ do {
+ r = ro_step(s, block);
+ if (r < 0)
+ return r;
+
+ i = search_fn(ro_node(s), key);
+
+ flags = le32_to_cpu(ro_node(s)->header.flags);
+ nr_entries = le32_to_cpu(ro_node(s)->header.nr_entries);
+ if (i < 0 || i >= nr_entries)
+ return -ENODATA;
+
+ if (flags & INTERNAL_NODE)
+ block = value64(ro_node(s), i);
+
+ } while (!(flags & LEAF_NODE));
+
+ *result_key = le64_to_cpu(ro_node(s)->keys[i]);
+ memcpy(v, value_ptr(ro_node(s), i, value_size), value_size);
+
+ return 0;
+}
+
+int dm_btree_lookup(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value_le)
+{
+ unsigned level, last_level = info->levels - 1;
+ int r = -ENODATA;
+ uint64_t rkey;
+ __le64 internal_value_le;
+ struct ro_spine spine;
+
+ init_ro_spine(&spine, info);
+ for (level = 0; level < info->levels; level++) {
+ size_t size;
+ void *value_p;
+
+ if (level == last_level) {
+ value_p = value_le;
+ size = info->value_type.size;
+
+ } else {
+ value_p = &internal_value_le;
+ size = sizeof(uint64_t);
+ }
+
+ r = btree_lookup_raw(&spine, root, keys[level],
+ lower_bound, &rkey,
+ value_p, size);
+
+ if (!r) {
+ if (rkey != keys[level]) {
+ exit_ro_spine(&spine);
+ return -ENODATA;
+ }
+ } else {
+ exit_ro_spine(&spine);
+ return r;
+ }
+
+ root = le64_to_cpu(internal_value_le);
+ }
+ exit_ro_spine(&spine);
+
+ return r;
+}
+EXPORT_SYMBOL_GPL(dm_btree_lookup);
+
+/*
+ * Splits a node by creating a sibling node and shifting half the nodes
+ * contents across. Assumes there is a parent node, and it has room for
+ * another child.
+ *
+ * Before:
+ * +--------+
+ * | Parent |
+ * +--------+
+ * |
+ * v
+ * +----------+
+ * | A ++++++ |
+ * +----------+
+ *
+ *
+ * After:
+ * +--------+
+ * | Parent |
+ * +--------+
+ * | |
+ * v +------+
+ * +---------+ |
+ * | A* +++ | v
+ * +---------+ +-------+
+ * | B +++ |
+ * +-------+
+ *
+ * Where A* is a shadow of A.
+ */
+static int btree_split_sibling(struct shadow_spine *s, dm_block_t root,
+ unsigned parent_index, uint64_t key)
+{
+ int r;
+ size_t size;
+ unsigned nr_left, nr_right;
+ struct dm_block *left, *right, *parent;
+ struct node *ln, *rn, *pn;
+ __le64 location;
+
+ left = shadow_current(s);
+
+ r = new_block(s->info, &right);
+ if (r < 0)
+ return r;
+
+ ln = dm_block_data(left);
+ rn = dm_block_data(right);
+
+ nr_left = le32_to_cpu(ln->header.nr_entries) / 2;
+ nr_right = le32_to_cpu(ln->header.nr_entries) - nr_left;
+
+ ln->header.nr_entries = cpu_to_le32(nr_left);
+
+ rn->header.flags = ln->header.flags;
+ rn->header.nr_entries = cpu_to_le32(nr_right);
+ rn->header.max_entries = ln->header.max_entries;
+ rn->header.value_size = ln->header.value_size;
+ memcpy(rn->keys, ln->keys + nr_left, nr_right * sizeof(rn->keys[0]));
+
+ size = le32_to_cpu(ln->header.flags) & INTERNAL_NODE ?
+ sizeof(uint64_t) : s->info->value_type.size;
+ memcpy(value_ptr(rn, 0, size), value_ptr(ln, nr_left, size),
+ size * nr_right);
+
+ /*
+ * Patch up the parent
+ */
+ parent = shadow_parent(s);
+
+ pn = dm_block_data(parent);
+ location = cpu_to_le64(dm_block_location(left));
+ __dm_bless_for_disk(&location);
+ memcpy_disk(value_ptr(pn, parent_index, sizeof(__le64)),
+ &location, sizeof(__le64));
+
+ location = cpu_to_le64(dm_block_location(right));
+ __dm_bless_for_disk(&location);
+
+ r = insert_at(sizeof(__le64), pn, parent_index + 1,
+ le64_to_cpu(rn->keys[0]), &location);
+ if (r)
+ return r;
+
+ if (key < le64_to_cpu(rn->keys[0])) {
+ unlock_block(s->info, right);
+ s->nodes[1] = left;
+ } else {
+ unlock_block(s->info, left);
+ s->nodes[1] = right;
+ }
+
+ return 0;
+}
+
+/*
+ * Splits a node by creating two new children beneath the given node.
+ *
+ * Before:
+ * +----------+
+ * | A ++++++ |
+ * +----------+
+ *
+ *
+ * After:
+ * +------------+
+ * | A (shadow) |
+ * +------------+
+ * | |
+ * +------+ +----+
+ * | |
+ * v v
+ * +-------+ +-------+
+ * | B +++ | | C +++ |
+ * +-------+ +-------+
+ */
+static int btree_split_beneath(struct shadow_spine *s, uint64_t key)
+{
+ int r;
+ size_t size;
+ unsigned nr_left, nr_right;
+ struct dm_block *left, *right, *new_parent;
+ struct node *pn, *ln, *rn;
+ __le64 val;
+
+ new_parent = shadow_current(s);
+
+ r = new_block(s->info, &left);
+ if (r < 0)
+ return r;
+
+ r = new_block(s->info, &right);
+ if (r < 0) {
+ /* FIXME: put left */
+ return r;
+ }
+
+ pn = dm_block_data(new_parent);
+ ln = dm_block_data(left);
+ rn = dm_block_data(right);
+
+ nr_left = le32_to_cpu(pn->header.nr_entries) / 2;
+ nr_right = le32_to_cpu(pn->header.nr_entries) - nr_left;
+
+ ln->header.flags = pn->header.flags;
+ ln->header.nr_entries = cpu_to_le32(nr_left);
+ ln->header.max_entries = pn->header.max_entries;
+ ln->header.value_size = pn->header.value_size;
+
+ rn->header.flags = pn->header.flags;
+ rn->header.nr_entries = cpu_to_le32(nr_right);
+ rn->header.max_entries = pn->header.max_entries;
+ rn->header.value_size = pn->header.value_size;
+
+ memcpy(ln->keys, pn->keys, nr_left * sizeof(pn->keys[0]));
+ memcpy(rn->keys, pn->keys + nr_left, nr_right * sizeof(pn->keys[0]));
+
+ size = le32_to_cpu(pn->header.flags) & INTERNAL_NODE ?
+ sizeof(__le64) : s->info->value_type.size;
+ memcpy(value_ptr(ln, 0, size), value_ptr(pn, 0, size), nr_left * size);
+ memcpy(value_ptr(rn, 0, size), value_ptr(pn, nr_left, size),
+ nr_right * size);
+
+ /* new_parent should just point to l and r now */
+ pn->header.flags = cpu_to_le32(INTERNAL_NODE);
+ pn->header.nr_entries = cpu_to_le32(2);
+ pn->header.max_entries = cpu_to_le32(
+ calc_max_entries(sizeof(__le64),
+ dm_bm_block_size(
+ dm_tm_get_bm(s->info->tm))));
+ pn->header.value_size = cpu_to_le32(sizeof(__le64));
+
+ val = cpu_to_le64(dm_block_location(left));
+ __dm_bless_for_disk(&val);
+ pn->keys[0] = ln->keys[0];
+ memcpy_disk(value_ptr(pn, 0, sizeof(__le64)), &val, sizeof(__le64));
+
+ val = cpu_to_le64(dm_block_location(right));
+ __dm_bless_for_disk(&val);
+ pn->keys[1] = rn->keys[0];
+ memcpy_disk(value_ptr(pn, 1, sizeof(__le64)), &val, sizeof(__le64));
+
+ /*
+ * rejig the spine. This is ugly, since it knows too
+ * much about the spine
+ */
+ if (s->nodes[0] != new_parent) {
+ unlock_block(s->info, s->nodes[0]);
+ s->nodes[0] = new_parent;
+ }
+ if (key < le64_to_cpu(rn->keys[0])) {
+ unlock_block(s->info, right);
+ s->nodes[1] = left;
+ } else {
+ unlock_block(s->info, left);
+ s->nodes[1] = right;
+ }
+ s->count = 2;
+
+ return 0;
+}
+
+static int btree_insert_raw(struct shadow_spine *s, dm_block_t root,
+ struct dm_btree_value_type *vt,
+ uint64_t key, unsigned *index)
+{
+ int r, i = *index, top = 1;
+ struct node *node;
+
+ for (;;) {
+ r = shadow_step(s, root, vt);
+ if (r < 0)
+ return r;
+
+ node = dm_block_data(shadow_current(s));
+
+ /*
+ * We have to patch up the parent node, ugly, but I don't
+ * see a way to do this automatically as part of the spine
+ * op.
+ */
+ if (shadow_has_parent(s) && i >= 0) { /* FIXME: second clause unness. */
+ __le64 location = cpu_to_le64(dm_block_location(shadow_current(s)));
+
+ __dm_bless_for_disk(&location);
+ memcpy_disk(value_ptr(dm_block_data(shadow_parent(s)), i, sizeof(uint64_t)),
+ &location, sizeof(__le64));
+ }
+
+ node = dm_block_data(shadow_current(s));
+
+ if (node->header.nr_entries == node->header.max_entries) {
+ if (top)
+ r = btree_split_beneath(s, key);
+ else
+ r = btree_split_sibling(s, root, i, key);
+
+ if (r < 0)
+ return r;
+ }
+
+ node = dm_block_data(shadow_current(s));
+
+ i = lower_bound(node, key);
+
+ if (le32_to_cpu(node->header.flags) & LEAF_NODE)
+ break;
+
+ if (i < 0) {
+ /* change the bounds on the lowest key */
+ node->keys[0] = cpu_to_le64(key);
+ i = 0;
+ }
+
+ root = value64(node, i);
+ top = 0;
+ }
+
+ if (i < 0 || le64_to_cpu(node->keys[i]) != key)
+ i++;
+
+ *index = i;
+ return 0;
+}
+
+static int insert(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root,
+ int *inserted)
+ __dm_written_to_disk(value)
+{
+ int r, need_insert;
+ unsigned level, index = -1, last_level = info->levels - 1;
+ dm_block_t block = root;
+ struct shadow_spine spine;
+ struct node *n;
+ struct dm_btree_value_type le64_type;
+
+ le64_type.context = NULL;
+ le64_type.size = sizeof(__le64);
+ le64_type.inc = NULL;
+ le64_type.dec = NULL;
+ le64_type.equal = NULL;
+
+ init_shadow_spine(&spine, info);
+
+ for (level = 0; level < (info->levels - 1); level++) {
+ r = btree_insert_raw(&spine, block, &le64_type, keys[level], &index);
+ if (r < 0)
+ goto bad;
+
+ n = dm_block_data(shadow_current(&spine));
+ need_insert = ((index >= le32_to_cpu(n->header.nr_entries)) ||
+ (le64_to_cpu(n->keys[index]) != keys[level]));
+
+ if (need_insert) {
+ dm_block_t new_tree;
+ __le64 new_le;
+
+ r = dm_btree_empty(info, &new_tree);
+ if (r < 0)
+ goto bad;
+
+ new_le = cpu_to_le64(new_tree);
+ __dm_bless_for_disk(&new_le);
+
+ r = insert_at(sizeof(uint64_t), n, index,
+ keys[level], &new_le);
+ if (r)
+ goto bad;
+ }
+
+ if (level < last_level)
+ block = value64(n, index);
+ }
+
+ r = btree_insert_raw(&spine, block, &info->value_type,
+ keys[level], &index);
+ if (r < 0)
+ goto bad;
+
+ n = dm_block_data(shadow_current(&spine));
+ need_insert = ((index >= le32_to_cpu(n->header.nr_entries)) ||
+ (le64_to_cpu(n->keys[index]) != keys[level]));
+
+ if (need_insert) {
+ if (inserted)
+ *inserted = 1;
+
+ r = insert_at(info->value_type.size, n, index,
+ keys[level], value);
+ if (r)
+ goto bad_unblessed;
+ } else {
+ if (inserted)
+ *inserted = 0;
+
+ if (info->value_type.dec &&
+ (!info->value_type.equal ||
+ !info->value_type.equal(
+ info->value_type.context,
+ value_ptr(n, index, info->value_type.size),
+ value))) {
+ info->value_type.dec(info->value_type.context,
+ value_ptr(n, index, info->value_type.size));
+ }
+ memcpy_disk(value_ptr(n, index, info->value_type.size),
+ value, info->value_type.size);
+ }
+
+ *new_root = shadow_root(&spine);
+ exit_shadow_spine(&spine);
+
+ return 0;
+
+bad:
+ __dm_unbless_for_disk(value);
+bad_unblessed:
+ exit_shadow_spine(&spine);
+ return r;
+}
+
+int dm_btree_insert(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root)
+ __dm_written_to_disk(value)
+{
+ return insert(info, root, keys, value, new_root, NULL);
+}
+EXPORT_SYMBOL_GPL(dm_btree_insert);
+
+int dm_btree_insert_notify(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root,
+ int *inserted)
+ __dm_written_to_disk(value)
+{
+ return insert(info, root, keys, value, new_root, inserted);
+}
+EXPORT_SYMBOL_GPL(dm_btree_insert_notify);
+
+/*----------------------------------------------------------------*/
+
+static int find_highest_key(struct ro_spine *s, dm_block_t block,
+ uint64_t *result_key, dm_block_t *next_block)
+{
+ int i, r;
+ uint32_t flags;
+
+ do {
+ r = ro_step(s, block);
+ if (r < 0)
+ return r;
+
+ flags = le32_to_cpu(ro_node(s)->header.flags);
+ i = le32_to_cpu(ro_node(s)->header.nr_entries);
+ if (!i)
+ return -ENODATA;
+ else
+ i--;
+
+ *result_key = le64_to_cpu(ro_node(s)->keys[i]);
+ if (next_block || flags & INTERNAL_NODE)
+ block = value64(ro_node(s), i);
+
+ } while (flags & INTERNAL_NODE);
+
+ if (next_block)
+ *next_block = block;
+ return 0;
+}
+
+int dm_btree_find_highest_key(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *result_keys)
+{
+ int r = 0, count = 0, level;
+ struct ro_spine spine;
+
+ init_ro_spine(&spine, info);
+ for (level = 0; level < info->levels; level++) {
+ r = find_highest_key(&spine, root, result_keys + level,
+ level == info->levels - 1 ? NULL : &root);
+ if (r == -ENODATA) {
+ r = 0;
+ break;
+
+ } else if (r)
+ break;
+
+ count++;
+ }
+ exit_ro_spine(&spine);
+
+ return r ? r : count;
+}
+EXPORT_SYMBOL_GPL(dm_btree_find_highest_key);
diff --git a/drivers/md/persistent-data/dm-btree.h b/drivers/md/persistent-data/dm-btree.h
new file mode 100644
index 0000000..ae02c84
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+#ifndef _LINUX_DM_BTREE_H
+#define _LINUX_DM_BTREE_H
+
+#include "dm-block-manager.h"
+
+struct dm_transaction_manager;
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Annotations used to check on-disk metadata is handled as little-endian.
+ */
+#ifdef __CHECKER__
+# define __dm_written_to_disk(x) __releases(x)
+# define __dm_reads_from_disk(x) __acquires(x)
+# define __dm_bless_for_disk(x) __acquire(x)
+# define __dm_unbless_for_disk(x) __release(x)
+#else
+# define __dm_written_to_disk(x)
+# define __dm_reads_from_disk(x)
+# define __dm_bless_for_disk(x)
+# define __dm_unbless_for_disk(x)
+#endif
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Manipulates hierarchical B+ trees with 64-bit keys and arbitrary-sized
+ * values.
+ */
+
+/*
+ * Infomation about the values stored within the btree.
+ */
+struct dm_btree_value_type {
+ void *context;
+
+ /*
+ * The size in bytes of each value.
+ */
+ uint32_t size;
+
+ /*
+ * Any of these methods can be safely set to NULL if you do not
+ * need the corresponding feature.
+ */
+
+ /*
+ * The btree is making a duplicate of the value, for instance
+ * because previously-shared btree nodes have now diverged.
+ * @value argument is the new copy that the copy function may modify.
+ * (Probably it just wants to increment a reference count
+ * somewhere.) This method is _not_ called for insertion of a new
+ * value: It is assumed the ref count is already 1.
+ */
+ void (*inc)(void *context, void *value);
+
+ /*
+ * This value is being deleted. The btree takes care of freeing
+ * the memory pointed to by @value. Often the del function just
+ * needs to decrement a reference count somewhere.
+ */
+ void (*dec)(void *context, void *value);
+
+ /*
+ * A test for equality between two values. When a value is
+ * overwritten with a new one, the old one has the dec method
+ * called _unless_ the new and old value are deemed equal.
+ */
+ int (*equal)(void *context, void *value1, void *value2);
+};
+
+/*
+ * The shape and contents of a btree.
+ */
+struct dm_btree_info {
+ struct dm_transaction_manager *tm;
+
+ /*
+ * Number of nested btrees. (Not the depth of a single tree.)
+ */
+ unsigned levels;
+ struct dm_btree_value_type value_type;
+};
+
+/*
+ * Set up an empty tree. O(1).
+ */
+int dm_btree_empty(struct dm_btree_info *info, dm_block_t *root);
+
+/*
+ * Delete a tree. O(n) - this is the slow one! It can also block, so
+ * please don't call it on an IO path.
+ */
+int dm_btree_del(struct dm_btree_info *info, dm_block_t root);
+
+/*
+ * All the lookup functions return -ENODATA if the key cannot be found.
+ */
+
+/*
+ * Tries to find a key that matches exactly. O(ln(n))
+ */
+int dm_btree_lookup(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value_le);
+
+/*
+ * Insertion (or overwrite an existing value). O(ln(n))
+ */
+int dm_btree_insert(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root)
+ __dm_written_to_disk(value);
+
+/*
+ * A variant of insert that indicates whether it actually inserted or just
+ * overwrote. Useful if you're keeping track of the number of entries in a
+ * tree.
+ */
+int dm_btree_insert_notify(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root,
+ int *inserted)
+ __dm_written_to_disk(value);
+
+/*
+ * Remove a key if present. This doesn't remove empty sub trees. Normally
+ * subtrees represent a separate entity, like a snapshot map, so this is
+ * correct behaviour. O(ln(n)).
+ */
+int dm_btree_remove(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, dm_block_t *new_root);
+
+/*
+ * Returns < 0 on failure. Otherwise the number of key entries that have
+ * been filled out. Remember trees can have zero entries, and as such have
+ * no highest key.
+ */
+int dm_btree_find_highest_key(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *result_keys);
+
+#endif /* _LINUX_DM_BTREE_H */
diff --git a/drivers/md/persistent-data/dm-persistent-data-internal.h b/drivers/md/persistent-data/dm-persistent-data-internal.h
new file mode 100644
index 0000000..c49e26f
--- /dev/null
+++ b/drivers/md/persistent-data/dm-persistent-data-internal.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _DM_PERSISTENT_DATA_INTERNAL_H
+#define _DM_PERSISTENT_DATA_INTERNAL_H
+
+#include "dm-block-manager.h"
+
+static inline unsigned dm_hash_block(dm_block_t b, unsigned hash_mask)
+{
+ const unsigned BIG_PRIME = 4294967291UL;
+
+ return (((unsigned) b) * BIG_PRIME) & hash_mask;
+}
+
+#endif /* _PERSISTENT_DATA_INTERNAL_H */
diff --git a/drivers/md/persistent-data/dm-space-map-checker.c b/drivers/md/persistent-data/dm-space-map-checker.c
new file mode 100644
index 0000000..bb44a93
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-checker.c
@@ -0,0 +1,437 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map-checker.h"
+
+#include <linux/device-mapper.h>
+
+#ifdef CONFIG_DM_DEBUG_SPACE_MAPS
+
+#define DM_MSG_PREFIX "space map checker"
+
+/*----------------------------------------------------------------*/
+
+struct count_array {
+ dm_block_t nr;
+ dm_block_t nr_free;
+
+ uint32_t *counts;
+};
+
+static int ca_get_count(struct count_array *ca, dm_block_t b, uint32_t *count)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ *count = ca->counts[b];
+ return 0;
+}
+
+static int ca_count_more_than_one(struct count_array *ca, dm_block_t b, int *r)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ *r = ca->counts[b] > 1;
+ return 0;
+}
+
+static int ca_set_count(struct count_array *ca, dm_block_t b, uint32_t count)
+{
+ uint32_t old_count;
+
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ old_count = ca->counts[b];
+
+ if (!count && old_count)
+ ca->nr_free++;
+
+ else if (count && !old_count)
+ ca->nr_free--;
+
+ ca->counts[b] = count;
+ return 0;
+}
+
+static int ca_inc_block(struct count_array *ca, dm_block_t b)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ ca_set_count(ca, b, ca->counts[b] + 1);
+ return 0;
+}
+
+static int ca_dec_block(struct count_array *ca, dm_block_t b)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ BUG_ON(ca->counts[b] == 0);
+ ca_set_count(ca, b, ca->counts[b] - 1);
+ return 0;
+}
+
+static int ca_create(struct count_array *ca, struct dm_space_map *sm)
+{
+ int r;
+ dm_block_t nr_blocks;
+
+ r = dm_sm_get_nr_blocks(sm, &nr_blocks);
+ if (r)
+ return r;
+
+ ca->nr = nr_blocks;
+ ca->nr_free = nr_blocks;
+ ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL);
+ if (!ca->counts)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int ca_load(struct count_array *ca, struct dm_space_map *sm)
+{
+ int r;
+ uint32_t count;
+ dm_block_t nr_blocks, i;
+
+ r = dm_sm_get_nr_blocks(sm, &nr_blocks);
+ if (r)
+ return r;
+
+ BUG_ON(ca->nr != nr_blocks);
+
+ DMWARN("Loading debug space map from disk. This may take some time");
+ for (i = 0; i < nr_blocks; i++) {
+ r = dm_sm_get_count(sm, i, &count);
+ if (r) {
+ DMERR("load failed");
+ return r;
+ }
+
+ ca_set_count(ca, i, count);
+ }
+ DMWARN("Load complete");
+
+ return 0;
+}
+
+static int ca_extend(struct count_array *ca, dm_block_t extra_blocks)
+{
+ dm_block_t nr_blocks = ca->nr + extra_blocks;
+ uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL);
+ if (!counts)
+ return -ENOMEM;
+
+ memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
+ kfree(ca->counts);
+ ca->nr = nr_blocks;
+ ca->nr_free += extra_blocks;
+ ca->counts = counts;
+ return 0;
+}
+
+static int ca_commit(struct count_array *old, struct count_array *new)
+{
+ if (old->nr != new->nr) {
+ BUG_ON(old->nr > new->nr);
+ ca_extend(old, new->nr - old->nr);
+ }
+
+ BUG_ON(old->nr != new->nr);
+ old->nr_free = new->nr_free;
+ memcpy(old->counts, new->counts, sizeof(*old->counts) * old->nr);
+ return 0;
+}
+
+static void ca_destroy(struct count_array *ca)
+{
+ kfree(ca->counts);
+}
+
+/*----------------------------------------------------------------*/
+
+struct sm_checker {
+ struct dm_space_map sm;
+
+ struct count_array old_counts;
+ struct count_array counts;
+
+ struct dm_space_map *real_sm;
+};
+
+static void sm_checker_destroy(struct dm_space_map *sm)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+
+ dm_sm_destroy(smc->real_sm);
+ ca_destroy(&smc->old_counts);
+ ca_destroy(&smc->counts);
+ kfree(smc);
+}
+
+static int sm_checker_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_get_nr_blocks(smc->real_sm, count);
+ if (!r)
+ BUG_ON(smc->old_counts.nr != *count);
+ return r;
+}
+
+static int sm_checker_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_get_nr_free(smc->real_sm, count);
+ if (!r) {
+ /*
+ * Slow, but we know it's correct.
+ */
+ dm_block_t b, n = 0;
+ for (b = 0; b < smc->old_counts.nr; b++)
+ if (smc->old_counts.counts[b] == 0 &&
+ smc->counts.counts[b] == 0)
+ n++;
+
+ if (n != *count)
+ DMERR("free block counts differ, checker %u, sm-disk:%u",
+ (unsigned) n, (unsigned) *count);
+ }
+ return r;
+}
+
+static int sm_checker_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_new_block(smc->real_sm, b);
+
+ if (!r) {
+ BUG_ON(*b >= smc->old_counts.nr);
+ BUG_ON(smc->old_counts.counts[*b] != 0);
+ BUG_ON(*b >= smc->counts.nr);
+ BUG_ON(smc->counts.counts[*b] != 0);
+ ca_set_count(&smc->counts, *b, 1);
+ }
+
+ return r;
+}
+
+static int sm_checker_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_inc_block(smc->real_sm, b);
+ int r2 = ca_inc_block(&smc->counts, b);
+ BUG_ON(r != r2);
+ return r;
+}
+
+static int sm_checker_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_dec_block(smc->real_sm, b);
+ int r2 = ca_dec_block(&smc->counts, b);
+ BUG_ON(r != r2);
+ return r;
+}
+
+static int sm_checker_get_count(struct dm_space_map *sm, dm_block_t b, uint32_t *result)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ uint32_t result2 = 0;
+ int r = dm_sm_get_count(smc->real_sm, b, result);
+ int r2 = ca_get_count(&smc->counts, b, &result2);
+
+ BUG_ON(r != r2);
+ if (!r)
+ BUG_ON(*result != result2);
+ return r;
+}
+
+static int sm_checker_count_more_than_one(struct dm_space_map *sm, dm_block_t b, int *result)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int result2 = 0;
+ int r = dm_sm_count_is_more_than_one(smc->real_sm, b, result);
+ int r2 = ca_count_more_than_one(&smc->counts, b, &result2);
+
+ BUG_ON(r != r2);
+ if (!r)
+ BUG_ON(!(*result) && result2);
+ return r;
+}
+
+static int sm_checker_set_count(struct dm_space_map *sm, dm_block_t b, uint32_t count)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ uint32_t old_rc;
+ int r = dm_sm_set_count(smc->real_sm, b, count);
+ int r2;
+
+ BUG_ON(b >= smc->counts.nr);
+ old_rc = smc->counts.counts[b];
+ r2 = ca_set_count(&smc->counts, b, count);
+ BUG_ON(r != r2);
+
+ return r;
+}
+
+static int sm_checker_commit(struct dm_space_map *sm)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r;
+
+ r = dm_sm_commit(smc->real_sm);
+ if (r)
+ return r;
+
+ r = ca_commit(&smc->old_counts, &smc->counts);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int sm_checker_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_extend(smc->real_sm, extra_blocks);
+ if (r)
+ return r;
+
+ return ca_extend(&smc->counts, extra_blocks);
+}
+
+static int sm_checker_root_size(struct dm_space_map *sm, size_t *result)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ return dm_sm_root_size(smc->real_sm, result);
+}
+
+static int sm_checker_copy_root(struct dm_space_map *sm, void *copy_to_here_le, size_t len)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ return dm_sm_copy_root(smc->real_sm, copy_to_here_le, len);
+}
+
+/*----------------------------------------------------------------*/
+
+static struct dm_space_map ops_ = {
+ .destroy = sm_checker_destroy,
+ .get_nr_blocks = sm_checker_get_nr_blocks,
+ .get_nr_free = sm_checker_get_nr_free,
+ .inc_block = sm_checker_inc_block,
+ .dec_block = sm_checker_dec_block,
+ .new_block = sm_checker_new_block,
+ .get_count = sm_checker_get_count,
+ .count_is_more_than_one = sm_checker_count_more_than_one,
+ .set_count = sm_checker_set_count,
+ .commit = sm_checker_commit,
+ .extend = sm_checker_extend,
+ .root_size = sm_checker_root_size,
+ .copy_root = sm_checker_copy_root
+};
+
+struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm)
+{
+ int r;
+ struct sm_checker *smc;
+
+ if (!sm)
+ return NULL;
+
+ smc = kmalloc(sizeof(*smc), GFP_KERNEL);
+ if (!smc)
+ return NULL;
+
+ memcpy(&smc->sm, &ops_, sizeof(smc->sm));
+ r = ca_create(&smc->old_counts, sm);
+ if (r) {
+ kfree(smc);
+ return NULL;
+ }
+
+ r = ca_create(&smc->counts, sm);
+ if (r) {
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ smc->real_sm = sm;
+
+ r = ca_load(&smc->counts, sm);
+ if (r) {
+ ca_destroy(&smc->counts);
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ r = ca_commit(&smc->old_counts, &smc->counts);
+ if (r) {
+ ca_destroy(&smc->counts);
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ return &smc->sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create);
+
+struct dm_space_map *dm_sm_checker_create_fresh(struct dm_space_map *sm)
+{
+ int r;
+ struct sm_checker *smc;
+
+ if (!sm)
+ return NULL;
+
+ smc = kmalloc(sizeof(*smc), GFP_KERNEL);
+ if (!smc)
+ return NULL;
+
+ memcpy(&smc->sm, &ops_, sizeof(smc->sm));
+ r = ca_create(&smc->old_counts, sm);
+ if (r) {
+ kfree(smc);
+ return NULL;
+ }
+
+ r = ca_create(&smc->counts, sm);
+ if (r) {
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ smc->real_sm = sm;
+ return &smc->sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create_fresh);
+
+/*----------------------------------------------------------------*/
+
+#else
+
+struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm)
+{
+ return sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create);
+
+struct dm_space_map *dm_sm_checker_create_fresh(struct dm_space_map *sm)
+{
+ return sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create_fresh);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/persistent-data/dm-space-map-checker.h b/drivers/md/persistent-data/dm-space-map-checker.h
new file mode 100644
index 0000000..444dccf
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-checker.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef SNAPSHOTS_SPACE_MAP_CHECKER_H
+#define SNAPSHOTS_SPACE_MAP_CHECKER_H
+
+#include "dm-space-map.h"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * This space map wraps a real on-disk space map, and verifies all of its
+ * operations. It uses a lot of memory, so only use if you have a specific
+ * problem that you're debugging.
+ *
+ * Ownership of @sm passes.
+ */
+struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm);
+struct dm_space_map *dm_sm_checker_create_fresh(struct dm_space_map *sm);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
new file mode 100644
index 0000000..df2494c
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -0,0 +1,705 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map-common.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/bitops.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "space map common"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Index validator.
+ */
+#define INDEX_CSUM_XOR 160478
+
+static void index_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_metadata_index *mi_le = dm_block_data(b);
+
+ mi_le->blocknr = cpu_to_le64(dm_block_location(b));
+ mi_le->csum = cpu_to_le32(dm_bm_checksum(&mi_le->padding,
+ block_size - sizeof(__le32),
+ INDEX_CSUM_XOR));
+}
+
+static int index_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_metadata_index *mi_le = dm_block_data(b);
+ __le32 csum_disk;
+
+ if (dm_block_location(b) != le64_to_cpu(mi_le->blocknr)) {
+ DMERR("index_check failed blocknr %llu wanted %llu",
+ le64_to_cpu(mi_le->blocknr), dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ csum_disk = cpu_to_le32(dm_bm_checksum(&mi_le->padding,
+ block_size - sizeof(__le32),
+ INDEX_CSUM_XOR));
+ if (csum_disk != mi_le->csum) {
+ DMERR("index_check failed csum %u wanted %u",
+ le32_to_cpu(csum_disk), le32_to_cpu(mi_le->csum));
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+static struct dm_block_validator index_validator = {
+ .name = "index",
+ .prepare_for_write = index_prepare_for_write,
+ .check = index_check
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Bitmap validator
+ */
+#define BITMAP_CSUM_XOR 240779
+
+static void bitmap_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_bitmap_header *disk_header = dm_block_data(b);
+
+ disk_header->blocknr = cpu_to_le64(dm_block_location(b));
+ disk_header->csum = cpu_to_le32(dm_bm_checksum(&disk_header->not_used,
+ block_size - sizeof(__le32),
+ BITMAP_CSUM_XOR));
+}
+
+static int bitmap_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_bitmap_header *disk_header = dm_block_data(b);
+ __le32 csum_disk;
+
+ if (dm_block_location(b) != le64_to_cpu(disk_header->blocknr)) {
+ DMERR("bitmap check failed blocknr %llu wanted %llu",
+ le64_to_cpu(disk_header->blocknr), dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ csum_disk = cpu_to_le32(dm_bm_checksum(&disk_header->not_used,
+ block_size - sizeof(__le32),
+ BITMAP_CSUM_XOR));
+ if (csum_disk != disk_header->csum) {
+ DMERR("bitmap check failed csum %u wanted %u",
+ le32_to_cpu(csum_disk), le32_to_cpu(disk_header->csum));
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+static struct dm_block_validator dm_sm_bitmap_validator = {
+ .name = "sm_bitmap",
+ .prepare_for_write = bitmap_prepare_for_write,
+ .check = bitmap_check
+};
+
+/*----------------------------------------------------------------*/
+
+#define ENTRIES_PER_WORD 32
+#define ENTRIES_SHIFT 5
+
+static void *dm_bitmap_data(struct dm_block *b)
+{
+ return dm_block_data(b) + sizeof(struct disk_bitmap_header);
+}
+
+#define WORD_MASK_HIGH 0xAAAAAAAAAAAAAAAAULL
+
+static unsigned bitmap_word_used(void *addr, unsigned b)
+{
+ __le64 *words_le = addr;
+ __le64 *w_le = words_le + (b >> ENTRIES_SHIFT);
+
+ uint64_t bits = le64_to_cpu(*w_le);
+ uint64_t mask = (bits + WORD_MASK_HIGH + 1) & WORD_MASK_HIGH;
+
+ return !(~bits & mask);
+}
+
+static unsigned sm_lookup_bitmap(void *addr, unsigned b)
+{
+ __le64 *words_le = addr;
+ __le64 *w_le = words_le + (b >> ENTRIES_SHIFT);
+ unsigned hi, lo;
+
+ b = (b & (ENTRIES_PER_WORD - 1)) << 1;
+ hi = !!test_bit_le(b, (void *) w_le);
+ lo = !!test_bit_le(b + 1, (void *) w_le);
+ return (hi << 1) | lo;
+}
+
+static void sm_set_bitmap(void *addr, unsigned b, unsigned val)
+{
+ __le64 *words_le = addr;
+ __le64 *w_le = words_le + (b >> ENTRIES_SHIFT);
+
+ b = (b & (ENTRIES_PER_WORD - 1)) << 1;
+
+ if (val & 2)
+ __set_bit_le(b, (void *) w_le);
+ else
+ __clear_bit_le(b, (void *) w_le);
+
+ if (val & 1)
+ __set_bit_le(b + 1, (void *) w_le);
+ else
+ __clear_bit_le(b + 1, (void *) w_le);
+}
+
+static int sm_find_free(void *addr, unsigned begin, unsigned end,
+ unsigned *result)
+{
+ while (begin < end) {
+ if (!(begin & (ENTRIES_PER_WORD - 1)) &&
+ bitmap_word_used(addr, begin)) {
+ begin += ENTRIES_PER_WORD;
+ continue;
+ }
+
+ if (!sm_lookup_bitmap(addr, begin)) {
+ *result = begin;
+ return 0;
+ }
+
+ begin++;
+ }
+
+ return -ENOSPC;
+}
+
+/*----------------------------------------------------------------*/
+
+static int sm_ll_init(struct ll_disk *ll, struct dm_transaction_manager *tm)
+{
+ ll->tm = tm;
+
+ ll->bitmap_info.tm = tm;
+ ll->bitmap_info.levels = 1;
+
+ /*
+ * Because the new bitmap blocks are created via a shadow
+ * operation, the old entry has already had its reference count
+ * decremented and we don't need the btree to do any bookkeeping.
+ */
+ ll->bitmap_info.value_type.size = sizeof(struct disk_index_entry);
+ ll->bitmap_info.value_type.inc = NULL;
+ ll->bitmap_info.value_type.dec = NULL;
+ ll->bitmap_info.value_type.equal = NULL;
+
+ ll->ref_count_info.tm = tm;
+ ll->ref_count_info.levels = 1;
+ ll->ref_count_info.value_type.size = sizeof(uint32_t);
+ ll->ref_count_info.value_type.inc = NULL;
+ ll->ref_count_info.value_type.dec = NULL;
+ ll->ref_count_info.value_type.equal = NULL;
+
+ ll->block_size = dm_bm_block_size(dm_tm_get_bm(tm));
+
+ if (ll->block_size > (1 << 30)) {
+ DMERR("block size too big to hold bitmaps");
+ return -EINVAL;
+ }
+
+ ll->entries_per_block = (ll->block_size - sizeof(struct disk_bitmap_header)) *
+ ENTRIES_PER_BYTE;
+ ll->nr_blocks = 0;
+ ll->bitmap_root = 0;
+ ll->ref_count_root = 0;
+
+ return 0;
+}
+
+int sm_ll_extend(struct ll_disk *ll, dm_block_t extra_blocks)
+{
+ int r;
+ dm_block_t i, nr_blocks, nr_indexes;
+ unsigned old_blocks, blocks;
+
+ nr_blocks = ll->nr_blocks + extra_blocks;
+ old_blocks = dm_sector_div_up(ll->nr_blocks, ll->entries_per_block);
+ blocks = dm_sector_div_up(nr_blocks, ll->entries_per_block);
+
+ nr_indexes = dm_sector_div_up(nr_blocks, ll->entries_per_block);
+ if (nr_indexes > ll->max_entries(ll)) {
+ DMERR("space map too large");
+ return -EINVAL;
+ }
+
+ for (i = old_blocks; i < blocks; i++) {
+ struct dm_block *b;
+ struct disk_index_entry idx;
+
+ r = dm_tm_new_block(ll->tm, &dm_sm_bitmap_validator, &b);
+ if (r < 0)
+ return r;
+ idx.blocknr = cpu_to_le64(dm_block_location(b));
+
+ r = dm_tm_unlock(ll->tm, b);
+ if (r < 0)
+ return r;
+
+ idx.nr_free = cpu_to_le32(ll->entries_per_block);
+ idx.none_free_before = 0;
+
+ r = ll->save_ie(ll, i, &idx);
+ if (r < 0)
+ return r;
+ }
+
+ ll->nr_blocks = nr_blocks;
+ return 0;
+}
+
+int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result)
+{
+ int r;
+ dm_block_t index = b;
+ struct disk_index_entry ie_disk;
+ struct dm_block *blk;
+
+ b = do_div(index, ll->entries_per_block);
+ r = ll->load_ie(ll, index, &ie_disk);
+ if (r < 0)
+ return r;
+
+ r = dm_tm_read_lock(ll->tm, le64_to_cpu(ie_disk.blocknr),
+ &dm_sm_bitmap_validator, &blk);
+ if (r < 0)
+ return r;
+
+ *result = sm_lookup_bitmap(dm_bitmap_data(blk), b);
+
+ return dm_tm_unlock(ll->tm, blk);
+}
+
+int sm_ll_lookup(struct ll_disk *ll, dm_block_t b, uint32_t *result)
+{
+ __le32 le_rc;
+ int r = sm_ll_lookup_bitmap(ll, b, result);
+
+ if (r)
+ return r;
+
+ if (*result != 3)
+ return r;
+
+ r = dm_btree_lookup(&ll->ref_count_info, ll->ref_count_root, &b, &le_rc);
+ if (r < 0)
+ return r;
+
+ *result = le32_to_cpu(le_rc);
+
+ return r;
+}
+
+int sm_ll_find_free_block(struct ll_disk *ll, dm_block_t begin,
+ dm_block_t end, dm_block_t *result)
+{
+ int r;
+ struct disk_index_entry ie_disk;
+ dm_block_t i, index_begin = begin;
+ dm_block_t index_end = dm_sector_div_up(end, ll->entries_per_block);
+
+ /*
+ * FIXME: Use shifts
+ */
+ begin = do_div(index_begin, ll->entries_per_block);
+ end = do_div(end, ll->entries_per_block);
+
+ for (i = index_begin; i < index_end; i++, begin = 0) {
+ struct dm_block *blk;
+ unsigned position;
+ uint32_t bit_end;
+
+ r = ll->load_ie(ll, i, &ie_disk);
+ if (r < 0)
+ return r;
+
+ if (le32_to_cpu(ie_disk.nr_free) == 0)
+ continue;
+
+ r = dm_tm_read_lock(ll->tm, le64_to_cpu(ie_disk.blocknr),
+ &dm_sm_bitmap_validator, &blk);
+ if (r < 0)
+ return r;
+
+ bit_end = (i == index_end - 1) ? end : ll->entries_per_block;
+
+ r = sm_find_free(dm_bitmap_data(blk),
+ max_t(unsigned, begin, le32_to_cpu(ie_disk.none_free_before)),
+ bit_end, &position);
+ if (r == -ENOSPC) {
+ /*
+ * This might happen because we started searching
+ * part way through the bitmap.
+ */
+ dm_tm_unlock(ll->tm, blk);
+ continue;
+
+ } else if (r < 0) {
+ dm_tm_unlock(ll->tm, blk);
+ return r;
+ }
+
+ r = dm_tm_unlock(ll->tm, blk);
+ if (r < 0)
+ return r;
+
+ *result = i * ll->entries_per_block + (dm_block_t) position;
+ return 0;
+ }
+
+ return -ENOSPC;
+}
+
+int sm_ll_insert(struct ll_disk *ll, dm_block_t b,
+ uint32_t ref_count, enum allocation_event *ev)
+{
+ int r;
+ uint32_t bit, old;
+ struct dm_block *nb;
+ dm_block_t index = b;
+ struct disk_index_entry ie_disk;
+ void *bm_le;
+ int inc;
+
+ bit = do_div(index, ll->entries_per_block);
+ r = ll->load_ie(ll, index, &ie_disk);
+ if (r < 0)
+ return r;
+
+ r = dm_tm_shadow_block(ll->tm, le64_to_cpu(ie_disk.blocknr),
+ &dm_sm_bitmap_validator, &nb, &inc);
+ if (r < 0) {
+ DMERR("dm_tm_shadow_block() failed");
+ return r;
+ }
+ ie_disk.blocknr = cpu_to_le64(dm_block_location(nb));
+
+ bm_le = dm_bitmap_data(nb);
+ old = sm_lookup_bitmap(bm_le, bit);
+
+ if (ref_count <= 2) {
+ sm_set_bitmap(bm_le, bit, ref_count);
+
+ r = dm_tm_unlock(ll->tm, nb);
+ if (r < 0)
+ return r;
+
+#if 0
+ /* FIXME: dm_btree_remove doesn't handle this yet */
+ if (old > 2) {
+ r = dm_btree_remove(&ll->ref_count_info,
+ ll->ref_count_root,
+ &b, &ll->ref_count_root);
+ if (r)
+ return r;
+ }
+#endif
+
+ } else {
+ __le32 le_rc = cpu_to_le32(ref_count);
+
+ sm_set_bitmap(bm_le, bit, 3);
+ r = dm_tm_unlock(ll->tm, nb);
+ if (r < 0)
+ return r;
+
+ __dm_bless_for_disk(&le_rc);
+ r = dm_btree_insert(&ll->ref_count_info, ll->ref_count_root,
+ &b, &le_rc, &ll->ref_count_root);
+ if (r < 0) {
+ DMERR("ref count insert failed");
+ return r;
+ }
+ }
+
+ if (ref_count && !old) {
+ *ev = SM_ALLOC;
+ ll->nr_allocated++;
+ ie_disk.nr_free = cpu_to_le32(le32_to_cpu(ie_disk.nr_free) - 1);
+ if (le32_to_cpu(ie_disk.none_free_before) == bit)
+ ie_disk.none_free_before = cpu_to_le32(bit + 1);
+
+ } else if (old && !ref_count) {
+ *ev = SM_FREE;
+ ll->nr_allocated--;
+ ie_disk.nr_free = cpu_to_le32(le32_to_cpu(ie_disk.nr_free) + 1);
+ ie_disk.none_free_before = cpu_to_le32(min(le32_to_cpu(ie_disk.none_free_before), bit));
+ }
+
+ return ll->save_ie(ll, index, &ie_disk);
+}
+
+int sm_ll_inc(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev)
+{
+ int r;
+ uint32_t rc;
+
+ r = sm_ll_lookup(ll, b, &rc);
+ if (r)
+ return r;
+
+ return sm_ll_insert(ll, b, rc + 1, ev);
+}
+
+int sm_ll_dec(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev)
+{
+ int r;
+ uint32_t rc;
+
+ r = sm_ll_lookup(ll, b, &rc);
+ if (r)
+ return r;
+
+ if (!rc)
+ return -EINVAL;
+
+ return sm_ll_insert(ll, b, rc - 1, ev);
+}
+
+int sm_ll_commit(struct ll_disk *ll)
+{
+ return ll->commit(ll);
+}
+
+/*----------------------------------------------------------------*/
+
+static int metadata_ll_load_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ memcpy(ie, ll->mi_le.index + index, sizeof(*ie));
+ return 0;
+}
+
+static int metadata_ll_save_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ memcpy(ll->mi_le.index + index, ie, sizeof(*ie));
+ return 0;
+}
+
+static int metadata_ll_init_index(struct ll_disk *ll)
+{
+ int r;
+ struct dm_block *b;
+
+ r = dm_tm_new_block(ll->tm, &index_validator, &b);
+ if (r < 0)
+ return r;
+
+ memcpy(dm_block_data(b), &ll->mi_le, sizeof(ll->mi_le));
+ ll->bitmap_root = dm_block_location(b);
+
+ return dm_tm_unlock(ll->tm, b);
+}
+
+static int metadata_ll_open(struct ll_disk *ll)
+{
+ int r;
+ struct dm_block *block;
+
+ r = dm_tm_read_lock(ll->tm, ll->bitmap_root,
+ &index_validator, &block);
+ if (r)
+ return r;
+
+ memcpy(&ll->mi_le, dm_block_data(block), sizeof(ll->mi_le));
+ return dm_tm_unlock(ll->tm, block);
+}
+
+static dm_block_t metadata_ll_max_entries(struct ll_disk *ll)
+{
+ return MAX_METADATA_BITMAPS;
+}
+
+static int metadata_ll_commit(struct ll_disk *ll)
+{
+ int r, inc;
+ struct dm_block *b;
+
+ r = dm_tm_shadow_block(ll->tm, ll->bitmap_root, &index_validator, &b, &inc);
+ if (r)
+ return r;
+
+ memcpy(dm_block_data(b), &ll->mi_le, sizeof(ll->mi_le));
+ ll->bitmap_root = dm_block_location(b);
+
+ return dm_tm_unlock(ll->tm, b);
+}
+
+int sm_ll_new_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm)
+{
+ int r;
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = metadata_ll_load_ie;
+ ll->save_ie = metadata_ll_save_ie;
+ ll->init_index = metadata_ll_init_index;
+ ll->open_index = metadata_ll_open;
+ ll->max_entries = metadata_ll_max_entries;
+ ll->commit = metadata_ll_commit;
+
+ ll->nr_blocks = 0;
+ ll->nr_allocated = 0;
+
+ r = ll->init_index(ll);
+ if (r < 0)
+ return r;
+
+ r = dm_btree_empty(&ll->ref_count_info, &ll->ref_count_root);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+
+int sm_ll_open_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct disk_sm_root *smr = root_le;
+
+ if (len < sizeof(struct disk_sm_root)) {
+ DMERR("sm_metadata root too small");
+ return -ENOMEM;
+ }
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = metadata_ll_load_ie;
+ ll->save_ie = metadata_ll_save_ie;
+ ll->init_index = metadata_ll_init_index;
+ ll->open_index = metadata_ll_open;
+ ll->max_entries = metadata_ll_max_entries;
+ ll->commit = metadata_ll_commit;
+
+ ll->nr_blocks = le64_to_cpu(smr->nr_blocks);
+ ll->nr_allocated = le64_to_cpu(smr->nr_allocated);
+ ll->bitmap_root = le64_to_cpu(smr->bitmap_root);
+ ll->ref_count_root = le64_to_cpu(smr->ref_count_root);
+
+ return ll->open_index(ll);
+}
+
+/*----------------------------------------------------------------*/
+
+static int disk_ll_load_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ return dm_btree_lookup(&ll->bitmap_info, ll->bitmap_root, &index, ie);
+}
+
+static int disk_ll_save_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ __dm_bless_for_disk(ie);
+ return dm_btree_insert(&ll->bitmap_info, ll->bitmap_root,
+ &index, ie, &ll->bitmap_root);
+}
+
+static int disk_ll_init_index(struct ll_disk *ll)
+{
+ return dm_btree_empty(&ll->bitmap_info, &ll->bitmap_root);
+}
+
+static int disk_ll_open(struct ll_disk *ll)
+{
+ /* nothing to do */
+ return 0;
+}
+
+static dm_block_t disk_ll_max_entries(struct ll_disk *ll)
+{
+ return -1ULL;
+}
+
+static int disk_ll_commit(struct ll_disk *ll)
+{
+ return 0;
+}
+
+int sm_ll_new_disk(struct ll_disk *ll, struct dm_transaction_manager *tm)
+{
+ int r;
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = disk_ll_load_ie;
+ ll->save_ie = disk_ll_save_ie;
+ ll->init_index = disk_ll_init_index;
+ ll->open_index = disk_ll_open;
+ ll->max_entries = disk_ll_max_entries;
+ ll->commit = disk_ll_commit;
+
+ ll->nr_blocks = 0;
+ ll->nr_allocated = 0;
+
+ r = ll->init_index(ll);
+ if (r < 0)
+ return r;
+
+ r = dm_btree_empty(&ll->ref_count_info, &ll->ref_count_root);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+
+int sm_ll_open_disk(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct disk_sm_root *smr = root_le;
+
+ if (len < sizeof(struct disk_sm_root)) {
+ DMERR("sm_metadata root too small");
+ return -ENOMEM;
+ }
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = disk_ll_load_ie;
+ ll->save_ie = disk_ll_save_ie;
+ ll->init_index = disk_ll_init_index;
+ ll->open_index = disk_ll_open;
+ ll->max_entries = disk_ll_max_entries;
+ ll->commit = disk_ll_commit;
+
+ ll->nr_blocks = le64_to_cpu(smr->nr_blocks);
+ ll->nr_allocated = le64_to_cpu(smr->nr_allocated);
+ ll->bitmap_root = le64_to_cpu(smr->bitmap_root);
+ ll->ref_count_root = le64_to_cpu(smr->ref_count_root);
+
+ return ll->open_index(ll);
+}
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-space-map-common.h b/drivers/md/persistent-data/dm-space-map-common.h
new file mode 100644
index 0000000..8f22082
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-common.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_SPACE_MAP_COMMON_H
+#define DM_SPACE_MAP_COMMON_H
+
+#include "dm-btree.h"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Low level disk format
+ *
+ * Bitmap btree
+ * ------------
+ *
+ * Each value stored in the btree is an index_entry. This points to a
+ * block that is used as a bitmap. Within the bitmap hold 2 bits per
+ * entry, which represent UNUSED = 0, REF_COUNT = 1, REF_COUNT = 2 and
+ * REF_COUNT = many.
+ *
+ * Refcount btree
+ * --------------
+ *
+ * Any entry that has a ref count higher than 2 gets entered in the ref
+ * count tree. The leaf values for this tree is the 32-bit ref count.
+ */
+
+struct disk_index_entry {
+ __le64 blocknr;
+ __le32 nr_free;
+ __le32 none_free_before;
+} __packed;
+
+
+#define MAX_METADATA_BITMAPS 255
+struct disk_metadata_index {
+ __le32 csum;
+ __le32 padding;
+ __le64 blocknr;
+
+ struct disk_index_entry index[MAX_METADATA_BITMAPS];
+} __packed;
+
+struct ll_disk;
+
+typedef int (*load_ie_fn)(struct ll_disk *ll, dm_block_t index, struct disk_index_entry *result);
+typedef int (*save_ie_fn)(struct ll_disk *ll, dm_block_t index, struct disk_index_entry *ie);
+typedef int (*init_index_fn)(struct ll_disk *ll);
+typedef int (*open_index_fn)(struct ll_disk *ll);
+typedef dm_block_t (*max_index_entries_fn)(struct ll_disk *ll);
+typedef int (*commit_fn)(struct ll_disk *ll);
+
+struct ll_disk {
+ struct dm_transaction_manager *tm;
+ struct dm_btree_info bitmap_info;
+ struct dm_btree_info ref_count_info;
+
+ uint32_t block_size;
+ uint32_t entries_per_block;
+ dm_block_t nr_blocks;
+ dm_block_t nr_allocated;
+
+ /*
+ * bitmap_root may be a btree root or a simple index.
+ */
+ dm_block_t bitmap_root;
+
+ dm_block_t ref_count_root;
+
+ struct disk_metadata_index mi_le;
+ load_ie_fn load_ie;
+ save_ie_fn save_ie;
+ init_index_fn init_index;
+ open_index_fn open_index;
+ max_index_entries_fn max_entries;
+ commit_fn commit;
+};
+
+struct disk_sm_root {
+ __le64 nr_blocks;
+ __le64 nr_allocated;
+ __le64 bitmap_root;
+ __le64 ref_count_root;
+} __packed;
+
+#define ENTRIES_PER_BYTE 4
+
+struct disk_bitmap_header {
+ __le32 csum;
+ __le32 not_used;
+ __le64 blocknr;
+} __packed;
+
+enum allocation_event {
+ SM_NONE,
+ SM_ALLOC,
+ SM_FREE,
+};
+
+/*----------------------------------------------------------------*/
+
+int sm_ll_extend(struct ll_disk *ll, dm_block_t extra_blocks);
+int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result);
+int sm_ll_lookup(struct ll_disk *ll, dm_block_t b, uint32_t *result);
+int sm_ll_find_free_block(struct ll_disk *ll, dm_block_t begin,
+ dm_block_t end, dm_block_t *result);
+int sm_ll_insert(struct ll_disk *ll, dm_block_t b, uint32_t ref_count, enum allocation_event *ev);
+int sm_ll_inc(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev);
+int sm_ll_dec(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev);
+int sm_ll_commit(struct ll_disk *ll);
+
+int sm_ll_new_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm);
+int sm_ll_open_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len);
+
+int sm_ll_new_disk(struct ll_disk *ll, struct dm_transaction_manager *tm);
+int sm_ll_open_disk(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len);
+
+/*----------------------------------------------------------------*/
+
+#endif /* DM_SPACE_MAP_COMMON_H */
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c
new file mode 100644
index 0000000..aeff785
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map-checker.h"
+#include "dm-space-map-common.h"
+#include "dm-space-map-disk.h"
+#include "dm-space-map.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "space map disk"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Space map interface.
+ */
+struct sm_disk {
+ struct dm_space_map sm;
+
+ struct ll_disk ll;
+ struct ll_disk old_ll;
+
+ dm_block_t begin;
+ dm_block_t nr_allocated_this_transaction;
+};
+
+static void sm_disk_destroy(struct dm_space_map *sm)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ kfree(smd);
+}
+
+static int sm_disk_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ return sm_ll_extend(&smd->ll, extra_blocks);
+}
+
+static int sm_disk_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ *count = smd->old_ll.nr_blocks;
+
+ return 0;
+}
+
+static int sm_disk_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ *count = (smd->old_ll.nr_blocks - smd->old_ll.nr_allocated) - smd->nr_allocated_this_transaction;
+
+ return 0;
+}
+
+static int sm_disk_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ return sm_ll_lookup(&smd->ll, b, result);
+}
+
+static int sm_disk_count_is_more_than_one(struct dm_space_map *sm, dm_block_t b,
+ int *result)
+{
+ int r;
+ uint32_t count;
+
+ r = sm_disk_get_count(sm, b, &count);
+ if (r)
+ return r;
+
+ return count > 1;
+}
+
+static int sm_disk_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ int r;
+ uint32_t old_count;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_ll_insert(&smd->ll, b, count, &ev);
+ if (!r) {
+ switch (ev) {
+ case SM_NONE:
+ break;
+
+ case SM_ALLOC:
+ /*
+ * This _must_ be free in the prior transaction
+ * otherwise we've lost atomicity.
+ */
+ smd->nr_allocated_this_transaction++;
+ break;
+
+ case SM_FREE:
+ /*
+ * It's only free if it's also free in the last
+ * transaction.
+ */
+ r = sm_ll_lookup(&smd->old_ll, b, &old_count);
+ if (r)
+ return r;
+
+ if (!old_count)
+ smd->nr_allocated_this_transaction--;
+ break;
+ }
+ }
+
+ return r;
+}
+
+static int sm_disk_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_ll_inc(&smd->ll, b, &ev);
+ if (!r && (ev == SM_ALLOC))
+ /*
+ * This _must_ be free in the prior transaction
+ * otherwise we've lost atomicity.
+ */
+ smd->nr_allocated_this_transaction++;
+
+ return r;
+}
+
+static int sm_disk_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r;
+ uint32_t old_count;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_ll_dec(&smd->ll, b, &ev);
+ if (!r && (ev == SM_FREE)) {
+ /*
+ * It's only free if it's also free in the last
+ * transaction.
+ */
+ r = sm_ll_lookup(&smd->old_ll, b, &old_count);
+ if (r)
+ return r;
+
+ if (!old_count)
+ smd->nr_allocated_this_transaction--;
+ }
+
+ return r;
+}
+
+static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ int r;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ /* FIXME: we should loop round a couple of times */
+ r = sm_ll_find_free_block(&smd->old_ll, smd->begin, smd->old_ll.nr_blocks, b);
+ if (r)
+ return r;
+
+ smd->begin = *b + 1;
+ r = sm_ll_inc(&smd->ll, *b, &ev);
+ if (!r) {
+ BUG_ON(ev != SM_ALLOC);
+ smd->nr_allocated_this_transaction++;
+ }
+
+ return r;
+}
+
+static int sm_disk_commit(struct dm_space_map *sm)
+{
+ int r;
+ dm_block_t nr_free;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_disk_get_nr_free(sm, &nr_free);
+ if (r)
+ return r;
+
+ r = sm_ll_commit(&smd->ll);
+ if (r)
+ return r;
+
+ memcpy(&smd->old_ll, &smd->ll, sizeof(smd->old_ll));
+ smd->begin = 0;
+ smd->nr_allocated_this_transaction = 0;
+
+ r = sm_disk_get_nr_free(sm, &nr_free);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int sm_disk_root_size(struct dm_space_map *sm, size_t *result)
+{
+ *result = sizeof(struct disk_sm_root);
+
+ return 0;
+}
+
+static int sm_disk_copy_root(struct dm_space_map *sm, void *where_le, size_t max)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ struct disk_sm_root root_le;
+
+ root_le.nr_blocks = cpu_to_le64(smd->ll.nr_blocks);
+ root_le.nr_allocated = cpu_to_le64(smd->ll.nr_allocated);
+ root_le.bitmap_root = cpu_to_le64(smd->ll.bitmap_root);
+ root_le.ref_count_root = cpu_to_le64(smd->ll.ref_count_root);
+
+ if (max < sizeof(root_le))
+ return -ENOSPC;
+
+ memcpy(where_le, &root_le, sizeof(root_le));
+
+ return 0;
+}
+
+/*----------------------------------------------------------------*/
+
+static struct dm_space_map ops = {
+ .destroy = sm_disk_destroy,
+ .extend = sm_disk_extend,
+ .get_nr_blocks = sm_disk_get_nr_blocks,
+ .get_nr_free = sm_disk_get_nr_free,
+ .get_count = sm_disk_get_count,
+ .count_is_more_than_one = sm_disk_count_is_more_than_one,
+ .set_count = sm_disk_set_count,
+ .inc_block = sm_disk_inc_block,
+ .dec_block = sm_disk_dec_block,
+ .new_block = sm_disk_new_block,
+ .commit = sm_disk_commit,
+ .root_size = sm_disk_root_size,
+ .copy_root = sm_disk_copy_root
+};
+
+static struct dm_space_map *dm_sm_disk_create_real(
+ struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks)
+{
+ int r;
+ struct sm_disk *smd;
+
+ smd = kmalloc(sizeof(*smd), GFP_KERNEL);
+ if (!smd)
+ return ERR_PTR(-ENOMEM);
+
+ smd->begin = 0;
+ smd->nr_allocated_this_transaction = 0;
+ memcpy(&smd->sm, &ops, sizeof(smd->sm));
+
+ r = sm_ll_new_disk(&smd->ll, tm);
+ if (r)
+ goto bad;
+
+ r = sm_ll_extend(&smd->ll, nr_blocks);
+ if (r)
+ goto bad;
+
+ r = sm_disk_commit(&smd->sm);
+ if (r)
+ goto bad;
+
+ return &smd->sm;
+
+bad:
+ kfree(smd);
+ return ERR_PTR(r);
+}
+
+struct dm_space_map *dm_sm_disk_create(struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks)
+{
+ struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks);
+ return dm_sm_checker_create_fresh(sm);
+}
+EXPORT_SYMBOL_GPL(dm_sm_disk_create);
+
+static struct dm_space_map *dm_sm_disk_open_real(
+ struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct sm_disk *smd;
+
+ smd = kmalloc(sizeof(*smd), GFP_KERNEL);
+ if (!smd)
+ return ERR_PTR(-ENOMEM);
+
+ smd->begin = 0;
+ smd->nr_allocated_this_transaction = 0;
+ memcpy(&smd->sm, &ops, sizeof(smd->sm));
+
+ r = sm_ll_open_disk(&smd->ll, tm, root_le, len);
+ if (r)
+ goto bad;
+
+ r = sm_disk_commit(&smd->sm);
+ if (r)
+ goto bad;
+
+ return &smd->sm;
+
+bad:
+ kfree(smd);
+ return ERR_PTR(r);
+}
+
+struct dm_space_map *dm_sm_disk_open(struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ return dm_sm_checker_create(
+ dm_sm_disk_open_real(tm, root_le, len));
+}
+EXPORT_SYMBOL_GPL(dm_sm_disk_open);
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-space-map-disk.h b/drivers/md/persistent-data/dm-space-map-disk.h
new file mode 100644
index 0000000..447a0a9
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-disk.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_SPACE_MAP_DISK_H
+#define _LINUX_DM_SPACE_MAP_DISK_H
+
+#include "dm-block-manager.h"
+
+struct dm_space_map;
+struct dm_transaction_manager;
+
+/*
+ * Unfortunately we have to use two-phase construction due to the cycle
+ * between the tm and sm.
+ */
+struct dm_space_map *dm_sm_disk_create(struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks);
+
+struct dm_space_map *dm_sm_disk_open(struct dm_transaction_manager *tm,
+ void *root, size_t len);
+
+#endif /* _LINUX_DM_SPACE_MAP_DISK_H */
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c
new file mode 100644
index 0000000..e89ae5e
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map.h"
+#include "dm-space-map-common.h"
+#include "dm-space-map-metadata.h"
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "space map metadata"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Space map interface.
+ *
+ * The low level disk format is written using the standard btree and
+ * transaction manager. This means that performing disk operations may
+ * cause us to recurse into the space map in order to allocate new blocks.
+ * For this reason we have a pool of pre-allocated blocks large enough to
+ * service any metadata_ll_disk operation.
+ */
+
+/*
+ * FIXME: we should calculate this based on the size of the device.
+ * Only the metadata space map needs this functionality.
+ */
+#define MAX_RECURSIVE_ALLOCATIONS 1024
+
+enum block_op_type {
+ BOP_INC,
+ BOP_DEC
+};
+
+struct block_op {
+ enum block_op_type type;
+ dm_block_t block;
+};
+
+struct sm_metadata {
+ struct dm_space_map sm;
+
+ struct ll_disk ll;
+ struct ll_disk old_ll;
+
+ dm_block_t begin;
+
+ unsigned recursion_count;
+ unsigned allocated_this_transaction;
+ unsigned nr_uncommitted;
+ struct block_op uncommitted[MAX_RECURSIVE_ALLOCATIONS];
+};
+
+static int add_bop(struct sm_metadata *smm, enum block_op_type type, dm_block_t b)
+{
+ struct block_op *op;
+
+ if (smm->nr_uncommitted == MAX_RECURSIVE_ALLOCATIONS) {
+ DMERR("too many recursive allocations");
+ return -ENOMEM;
+ }
+
+ op = smm->uncommitted + smm->nr_uncommitted++;
+ op->type = type;
+ op->block = b;
+
+ return 0;
+}
+
+static int commit_bop(struct sm_metadata *smm, struct block_op *op)
+{
+ int r = 0;
+ enum allocation_event ev;
+
+ switch (op->type) {
+ case BOP_INC:
+ r = sm_ll_inc(&smm->ll, op->block, &ev);
+ break;
+
+ case BOP_DEC:
+ r = sm_ll_dec(&smm->ll, op->block, &ev);
+ break;
+ }
+
+ return r;
+}
+
+static void in(struct sm_metadata *smm)
+{
+ smm->recursion_count++;
+}
+
+static int out(struct sm_metadata *smm)
+{
+ int r = 0;
+
+ /*
+ * If we're not recursing then very bad things are happening.
+ */
+ if (!smm->recursion_count) {
+ DMERR("lost track of recursion depth");
+ return -ENOMEM;
+ }
+
+ if (smm->recursion_count == 1 && smm->nr_uncommitted) {
+ while (smm->nr_uncommitted && !r) {
+ smm->nr_uncommitted--;
+ r = commit_bop(smm, smm->uncommitted +
+ smm->nr_uncommitted);
+ if (r)
+ break;
+ }
+ }
+
+ smm->recursion_count--;
+
+ return r;
+}
+
+/*
+ * When using the out() function above, we often want to combine an error
+ * code for the operation run in the recursive context with that from
+ * out().
+ */
+static int combine_errors(int r1, int r2)
+{
+ return r1 ? r1 : r2;
+}
+
+static int recursing(struct sm_metadata *smm)
+{
+ return smm->recursion_count;
+}
+
+static void sm_metadata_destroy(struct dm_space_map *sm)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ kfree(smm);
+}
+
+static int sm_metadata_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ DMERR("doesn't support extend");
+ return -EINVAL;
+}
+
+static int sm_metadata_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ *count = smm->ll.nr_blocks;
+
+ return 0;
+}
+
+static int sm_metadata_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ *count = smm->old_ll.nr_blocks - smm->old_ll.nr_allocated -
+ smm->allocated_this_transaction;
+
+ return 0;
+}
+
+static int sm_metadata_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ int r, i;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+ unsigned adjustment = 0;
+
+ /*
+ * We may have some uncommitted adjustments to add. This list
+ * should always be really short.
+ */
+ for (i = 0; i < smm->nr_uncommitted; i++) {
+ struct block_op *op = smm->uncommitted + i;
+
+ if (op->block != b)
+ continue;
+
+ switch (op->type) {
+ case BOP_INC:
+ adjustment++;
+ break;
+
+ case BOP_DEC:
+ adjustment--;
+ break;
+ }
+ }
+
+ r = sm_ll_lookup(&smm->ll, b, result);
+ if (r)
+ return r;
+
+ *result += adjustment;
+
+ return 0;
+}
+
+static int sm_metadata_count_is_more_than_one(struct dm_space_map *sm,
+ dm_block_t b, int *result)
+{
+ int r, i, adjustment = 0;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+ uint32_t rc;
+
+ /*
+ * We may have some uncommitted adjustments to add. This list
+ * should always be really short.
+ */
+ for (i = 0; i < smm->nr_uncommitted; i++) {
+ struct block_op *op = smm->uncommitted + i;
+
+ if (op->block != b)
+ continue;
+
+ switch (op->type) {
+ case BOP_INC:
+ adjustment++;
+ break;
+
+ case BOP_DEC:
+ adjustment--;
+ break;
+ }
+ }
+
+ if (adjustment > 1) {
+ *result = 1;
+ return 0;
+ }
+
+ r = sm_ll_lookup_bitmap(&smm->ll, b, &rc);
+ if (r)
+ return r;
+
+ if (rc == 3)
+ /*
+ * We err on the side of caution, and always return true.
+ */
+ *result = 1;
+ else
+ *result = rc + adjustment > 1;
+
+ return 0;
+}
+
+static int sm_metadata_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ int r, r2;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ if (smm->recursion_count) {
+ DMERR("cannot recurse set_count()");
+ return -EINVAL;
+ }
+
+ in(smm);
+ r = sm_ll_insert(&smm->ll, b, count, &ev);
+ r2 = out(smm);
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r, r2 = 0;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ if (recursing(smm))
+ r = add_bop(smm, BOP_INC, b);
+ else {
+ in(smm);
+ r = sm_ll_inc(&smm->ll, b, &ev);
+ r2 = out(smm);
+ }
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r, r2 = 0;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ if (recursing(smm))
+ r = add_bop(smm, BOP_DEC, b);
+ else {
+ in(smm);
+ r = sm_ll_dec(&smm->ll, b, &ev);
+ r2 = out(smm);
+ }
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_new_block_(struct dm_space_map *sm, dm_block_t *b)
+{
+ int r, r2 = 0;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ r = sm_ll_find_free_block(&smm->old_ll, smm->begin, smm->old_ll.nr_blocks, b);
+ if (r)
+ return r;
+
+ smm->begin = *b + 1;
+
+ if (recursing(smm))
+ r = add_bop(smm, BOP_INC, *b);
+ else {
+ in(smm);
+ r = sm_ll_inc(&smm->ll, *b, &ev);
+ r2 = out(smm);
+ }
+
+ if (!r)
+ smm->allocated_this_transaction++;
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ int r = sm_metadata_new_block_(sm, b);
+ if (r)
+ DMERR("out of metadata space");
+ return r;
+}
+
+static int sm_metadata_commit(struct dm_space_map *sm)
+{
+ int r;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ r = sm_ll_commit(&smm->ll);
+ if (r)
+ return r;
+
+ memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll));
+ smm->begin = 0;
+ smm->allocated_this_transaction = 0;
+
+ return 0;
+}
+
+static int sm_metadata_root_size(struct dm_space_map *sm, size_t *result)
+{
+ *result = sizeof(struct disk_sm_root);
+
+ return 0;
+}
+
+static int sm_metadata_copy_root(struct dm_space_map *sm, void *where_le, size_t max)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+ struct disk_sm_root root_le;
+
+ root_le.nr_blocks = cpu_to_le64(smm->ll.nr_blocks);
+ root_le.nr_allocated = cpu_to_le64(smm->ll.nr_allocated);
+ root_le.bitmap_root = cpu_to_le64(smm->ll.bitmap_root);
+ root_le.ref_count_root = cpu_to_le64(smm->ll.ref_count_root);
+
+ if (max < sizeof(root_le))
+ return -ENOSPC;
+
+ memcpy(where_le, &root_le, sizeof(root_le));
+
+ return 0;
+}
+
+static struct dm_space_map ops = {
+ .destroy = sm_metadata_destroy,
+ .extend = sm_metadata_extend,
+ .get_nr_blocks = sm_metadata_get_nr_blocks,
+ .get_nr_free = sm_metadata_get_nr_free,
+ .get_count = sm_metadata_get_count,
+ .count_is_more_than_one = sm_metadata_count_is_more_than_one,
+ .set_count = sm_metadata_set_count,
+ .inc_block = sm_metadata_inc_block,
+ .dec_block = sm_metadata_dec_block,
+ .new_block = sm_metadata_new_block,
+ .commit = sm_metadata_commit,
+ .root_size = sm_metadata_root_size,
+ .copy_root = sm_metadata_copy_root
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * When a new space map is created that manages its own space. We use
+ * this tiny bootstrap allocator.
+ */
+static void sm_bootstrap_destroy(struct dm_space_map *sm)
+{
+}
+
+static int sm_bootstrap_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ DMERR("boostrap doesn't support extend");
+
+ return -EINVAL;
+}
+
+static int sm_bootstrap_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return smm->ll.nr_blocks;
+}
+
+static int sm_bootstrap_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ *count = smm->ll.nr_blocks - smm->begin;
+
+ return 0;
+}
+
+static int sm_bootstrap_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return b < smm->begin ? 1 : 0;
+}
+
+static int sm_bootstrap_count_is_more_than_one(struct dm_space_map *sm,
+ dm_block_t b, int *result)
+{
+ *result = 0;
+
+ return 0;
+}
+
+static int sm_bootstrap_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ DMERR("boostrap doesn't support set_count");
+
+ return -EINVAL;
+}
+
+static int sm_bootstrap_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ /*
+ * We know the entire device is unused.
+ */
+ if (smm->begin == smm->ll.nr_blocks)
+ return -ENOSPC;
+
+ *b = smm->begin++;
+
+ return 0;
+}
+
+static int sm_bootstrap_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return add_bop(smm, BOP_INC, b);
+}
+
+static int sm_bootstrap_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return add_bop(smm, BOP_DEC, b);
+}
+
+static int sm_bootstrap_commit(struct dm_space_map *sm)
+{
+ return 0;
+}
+
+static int sm_bootstrap_root_size(struct dm_space_map *sm, size_t *result)
+{
+ DMERR("boostrap doesn't support root_size");
+
+ return -EINVAL;
+}
+
+static int sm_bootstrap_copy_root(struct dm_space_map *sm, void *where,
+ size_t max)
+{
+ DMERR("boostrap doesn't support copy_root");
+
+ return -EINVAL;
+}
+
+static struct dm_space_map bootstrap_ops = {
+ .destroy = sm_bootstrap_destroy,
+ .extend = sm_bootstrap_extend,
+ .get_nr_blocks = sm_bootstrap_get_nr_blocks,
+ .get_nr_free = sm_bootstrap_get_nr_free,
+ .get_count = sm_bootstrap_get_count,
+ .count_is_more_than_one = sm_bootstrap_count_is_more_than_one,
+ .set_count = sm_bootstrap_set_count,
+ .inc_block = sm_bootstrap_inc_block,
+ .dec_block = sm_bootstrap_dec_block,
+ .new_block = sm_bootstrap_new_block,
+ .commit = sm_bootstrap_commit,
+ .root_size = sm_bootstrap_root_size,
+ .copy_root = sm_bootstrap_copy_root
+};
+
+/*----------------------------------------------------------------*/
+
+struct dm_space_map *dm_sm_metadata_init(void)
+{
+ struct sm_metadata *smm;
+
+ smm = kmalloc(sizeof(*smm), GFP_KERNEL);
+ if (!smm)
+ return ERR_PTR(-ENOMEM);
+
+ memcpy(&smm->sm, &ops, sizeof(smm->sm));
+
+ return &smm->sm;
+}
+
+int dm_sm_metadata_create(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks,
+ dm_block_t superblock)
+{
+ int r;
+ dm_block_t i;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ smm->begin = superblock + 1;
+ smm->recursion_count = 0;
+ smm->allocated_this_transaction = 0;
+ smm->nr_uncommitted = 0;
+
+ memcpy(&smm->sm, &bootstrap_ops, sizeof(smm->sm));
+
+ r = sm_ll_new_metadata(&smm->ll, tm);
+ if (r)
+ return r;
+
+ r = sm_ll_extend(&smm->ll, nr_blocks);
+ if (r)
+ return r;
+
+ memcpy(&smm->sm, &ops, sizeof(smm->sm));
+
+ /*
+ * Now we need to update the newly created data structures with the
+ * allocated blocks that they were built from.
+ */
+ for (i = superblock; !r && i < smm->begin; i++)
+ r = sm_ll_inc(&smm->ll, i, &ev);
+
+ if (r)
+ return r;
+
+ return sm_metadata_commit(sm);
+}
+
+int dm_sm_metadata_open(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ r = sm_ll_open_metadata(&smm->ll, tm, root_le, len);
+ if (r)
+ return r;
+
+ smm->begin = 0;
+ smm->recursion_count = 0;
+ smm->allocated_this_transaction = 0;
+ smm->nr_uncommitted = 0;
+
+ memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll));
+ return 0;
+}
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.h b/drivers/md/persistent-data/dm-space-map-metadata.h
new file mode 100644
index 0000000..39bba08
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-metadata.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_SPACE_MAP_METADATA_H
+#define DM_SPACE_MAP_METADATA_H
+
+#include "dm-transaction-manager.h"
+
+/*
+ * Unfortunately we have to use two-phase construction due to the cycle
+ * between the tm and sm.
+ */
+struct dm_space_map *dm_sm_metadata_init(void);
+
+/*
+ * Create a fresh space map.
+ */
+int dm_sm_metadata_create(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks,
+ dm_block_t superblock);
+
+/*
+ * Open from a previously-recorded root.
+ */
+int dm_sm_metadata_open(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ void *root_le, size_t len);
+
+#endif /* DM_SPACE_MAP_METADATA_H */
diff --git a/drivers/md/persistent-data/dm-space-map.h b/drivers/md/persistent-data/dm-space-map.h
new file mode 100644
index 0000000..1cbfc6b
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_SPACE_MAP_H
+#define _LINUX_DM_SPACE_MAP_H
+
+#include "dm-block-manager.h"
+
+/*
+ * struct dm_space_map keeps a record of how many times each block in a device
+ * is referenced. It needs to be fixed on disk as part of the transaction.
+ */
+struct dm_space_map {
+ void (*destroy)(struct dm_space_map *sm);
+
+ /*
+ * You must commit before allocating the newly added space.
+ */
+ int (*extend)(struct dm_space_map *sm, dm_block_t extra_blocks);
+
+ /*
+ * Extensions do not appear in this count until after commit has
+ * been called.
+ */
+ int (*get_nr_blocks)(struct dm_space_map *sm, dm_block_t *count);
+
+ /*
+ * Space maps must never allocate a block from the previous
+ * transaction, in case we need to rollback. This complicates the
+ * semantics of get_nr_free(), it should return the number of blocks
+ * that are available for allocation _now_. For instance you may
+ * have blocks with a zero reference count that will not be
+ * available for allocation until after the next commit.
+ */
+ int (*get_nr_free)(struct dm_space_map *sm, dm_block_t *count);
+
+ int (*get_count)(struct dm_space_map *sm, dm_block_t b, uint32_t *result);
+ int (*count_is_more_than_one)(struct dm_space_map *sm, dm_block_t b,
+ int *result);
+ int (*set_count)(struct dm_space_map *sm, dm_block_t b, uint32_t count);
+
+ int (*commit)(struct dm_space_map *sm);
+
+ int (*inc_block)(struct dm_space_map *sm, dm_block_t b);
+ int (*dec_block)(struct dm_space_map *sm, dm_block_t b);
+
+ /*
+ * new_block will increment the returned block.
+ */
+ int (*new_block)(struct dm_space_map *sm, dm_block_t *b);
+
+ /*
+ * The root contains all the information needed to fix the space map.
+ * Generally this info is small, so squirrel it away in a disk block
+ * along with other info.
+ */
+ int (*root_size)(struct dm_space_map *sm, size_t *result);
+ int (*copy_root)(struct dm_space_map *sm, void *copy_to_here_le, size_t len);
+};
+
+/*----------------------------------------------------------------*/
+
+static inline void dm_sm_destroy(struct dm_space_map *sm)
+{
+ sm->destroy(sm);
+}
+
+static inline int dm_sm_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ return sm->extend(sm, extra_blocks);
+}
+
+static inline int dm_sm_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ return sm->get_nr_blocks(sm, count);
+}
+
+static inline int dm_sm_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ return sm->get_nr_free(sm, count);
+}
+
+static inline int dm_sm_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ return sm->get_count(sm, b, result);
+}
+
+static inline int dm_sm_count_is_more_than_one(struct dm_space_map *sm,
+ dm_block_t b, int *result)
+{
+ return sm->count_is_more_than_one(sm, b, result);
+}
+
+static inline int dm_sm_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ return sm->set_count(sm, b, count);
+}
+
+static inline int dm_sm_commit(struct dm_space_map *sm)
+{
+ return sm->commit(sm);
+}
+
+static inline int dm_sm_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ return sm->inc_block(sm, b);
+}
+
+static inline int dm_sm_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ return sm->dec_block(sm, b);
+}
+
+static inline int dm_sm_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ return sm->new_block(sm, b);
+}
+
+static inline int dm_sm_root_size(struct dm_space_map *sm, size_t *result)
+{
+ return sm->root_size(sm, result);
+}
+
+static inline int dm_sm_copy_root(struct dm_space_map *sm, void *copy_to_here_le, size_t len)
+{
+ return sm->copy_root(sm, copy_to_here_le, len);
+}
+
+#endif /* _LINUX_DM_SPACE_MAP_H */
diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c
new file mode 100644
index 0000000..728e89a
--- /dev/null
+++ b/drivers/md/persistent-data/dm-transaction-manager.c
@@ -0,0 +1,400 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+#include "dm-transaction-manager.h"
+#include "dm-space-map.h"
+#include "dm-space-map-checker.h"
+#include "dm-space-map-disk.h"
+#include "dm-space-map-metadata.h"
+#include "dm-persistent-data-internal.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "transaction manager"
+
+/*----------------------------------------------------------------*/
+
+struct shadow_info {
+ struct hlist_node hlist;
+ dm_block_t where;
+};
+
+/*
+ * It would be nice if we scaled with the size of transaction.
+ */
+#define HASH_SIZE 256
+#define HASH_MASK (HASH_SIZE - 1)
+
+struct dm_transaction_manager {
+ int is_clone;
+ struct dm_transaction_manager *real;
+
+ struct dm_block_manager *bm;
+ struct dm_space_map *sm;
+
+ spinlock_t lock;
+ struct hlist_head buckets[HASH_SIZE];
+};
+
+/*----------------------------------------------------------------*/
+
+static int is_shadow(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ int r = 0;
+ unsigned bucket = dm_hash_block(b, HASH_MASK);
+ struct shadow_info *si;
+ struct hlist_node *n;
+
+ spin_lock(&tm->lock);
+ hlist_for_each_entry(si, n, tm->buckets + bucket, hlist)
+ if (si->where == b) {
+ r = 1;
+ break;
+ }
+ spin_unlock(&tm->lock);
+
+ return r;
+}
+
+/*
+ * This can silently fail if there's no memory. We're ok with this since
+ * creating redundant shadows causes no harm.
+ */
+static void insert_shadow(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ unsigned bucket;
+ struct shadow_info *si;
+
+ si = kmalloc(sizeof(*si), GFP_NOIO);
+ if (si) {
+ si->where = b;
+ bucket = dm_hash_block(b, HASH_MASK);
+ spin_lock(&tm->lock);
+ hlist_add_head(&si->hlist, tm->buckets + bucket);
+ spin_unlock(&tm->lock);
+ }
+}
+
+static void wipe_shadow_table(struct dm_transaction_manager *tm)
+{
+ struct shadow_info *si;
+ struct hlist_node *n, *tmp;
+ struct hlist_head *bucket;
+ int i;
+
+ spin_lock(&tm->lock);
+ for (i = 0; i < HASH_SIZE; i++) {
+ bucket = tm->buckets + i;
+ hlist_for_each_entry_safe(si, n, tmp, bucket, hlist)
+ kfree(si);
+
+ INIT_HLIST_HEAD(bucket);
+ }
+
+ spin_unlock(&tm->lock);
+}
+
+/*----------------------------------------------------------------*/
+
+static struct dm_transaction_manager *dm_tm_create(struct dm_block_manager *bm,
+ struct dm_space_map *sm)
+{
+ int i;
+ struct dm_transaction_manager *tm;
+
+ tm = kmalloc(sizeof(*tm), GFP_KERNEL);
+ if (!tm)
+ return ERR_PTR(-ENOMEM);
+
+ tm->is_clone = 0;
+ tm->real = NULL;
+ tm->bm = bm;
+ tm->sm = sm;
+
+ spin_lock_init(&tm->lock);
+ for (i = 0; i < HASH_SIZE; i++)
+ INIT_HLIST_HEAD(tm->buckets + i);
+
+ return tm;
+}
+
+struct dm_transaction_manager *dm_tm_create_non_blocking_clone(struct dm_transaction_manager *real)
+{
+ struct dm_transaction_manager *tm;
+
+ tm = kmalloc(sizeof(*tm), GFP_KERNEL);
+ if (tm) {
+ tm->is_clone = 1;
+ tm->real = real;
+ }
+
+ return tm;
+}
+EXPORT_SYMBOL_GPL(dm_tm_create_non_blocking_clone);
+
+void dm_tm_destroy(struct dm_transaction_manager *tm)
+{
+ kfree(tm);
+}
+EXPORT_SYMBOL_GPL(dm_tm_destroy);
+
+int dm_tm_pre_commit(struct dm_transaction_manager *tm)
+{
+ int r;
+
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ r = dm_sm_commit(tm->sm);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_tm_pre_commit);
+
+int dm_tm_commit(struct dm_transaction_manager *tm, struct dm_block *root)
+{
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ wipe_shadow_table(tm);
+
+ return dm_bm_flush_and_unlock(tm->bm, root);
+}
+EXPORT_SYMBOL_GPL(dm_tm_commit);
+
+int dm_tm_new_block(struct dm_transaction_manager *tm,
+ struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ int r;
+ dm_block_t new_block;
+
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ r = dm_sm_new_block(tm->sm, &new_block);
+ if (r < 0)
+ return r;
+
+ r = dm_bm_write_lock_zero(tm->bm, new_block, v, result);
+ if (r < 0) {
+ dm_sm_dec_block(tm->sm, new_block);
+ return r;
+ }
+
+ /*
+ * New blocks count as shadows in that they don't need to be
+ * shadowed again.
+ */
+ insert_shadow(tm, new_block);
+
+ return 0;
+}
+
+static int __shadow_block(struct dm_transaction_manager *tm, dm_block_t orig,
+ struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ int r;
+ dm_block_t new;
+ struct dm_block *orig_block;
+
+ r = dm_sm_new_block(tm->sm, &new);
+ if (r < 0)
+ return r;
+
+ r = dm_sm_dec_block(tm->sm, orig);
+ if (r < 0)
+ return r;
+
+ r = dm_bm_read_lock(tm->bm, orig, v, &orig_block);
+ if (r < 0)
+ return r;
+
+ r = dm_bm_unlock_move(orig_block, new);
+ if (r < 0) {
+ dm_bm_unlock(orig_block);
+ return r;
+ }
+
+ return dm_bm_write_lock(tm->bm, new, v, result);
+}
+
+int dm_tm_shadow_block(struct dm_transaction_manager *tm, dm_block_t orig,
+ struct dm_block_validator *v, struct dm_block **result,
+ int *inc_children)
+{
+ int r;
+
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ r = dm_sm_count_is_more_than_one(tm->sm, orig, inc_children);
+ if (r < 0)
+ return r;
+
+ if (is_shadow(tm, orig) && !*inc_children)
+ return dm_bm_write_lock(tm->bm, orig, v, result);
+
+ r = __shadow_block(tm, orig, v, result);
+ if (r < 0)
+ return r;
+ insert_shadow(tm, dm_block_location(*result));
+
+ return r;
+}
+
+int dm_tm_read_lock(struct dm_transaction_manager *tm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **blk)
+{
+ if (tm->is_clone)
+ return dm_bm_read_try_lock(tm->real->bm, b, v, blk);
+
+ return dm_bm_read_lock(tm->bm, b, v, blk);
+}
+
+int dm_tm_unlock(struct dm_transaction_manager *tm, struct dm_block *b)
+{
+ return dm_bm_unlock(b);
+}
+EXPORT_SYMBOL_GPL(dm_tm_unlock);
+
+void dm_tm_inc(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ /*
+ * The non-blocking clone doesn't support this.
+ */
+ BUG_ON(tm->is_clone);
+
+ dm_sm_inc_block(tm->sm, b);
+}
+EXPORT_SYMBOL_GPL(dm_tm_inc);
+
+void dm_tm_dec(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ /*
+ * The non-blocking clone doesn't support this.
+ */
+ BUG_ON(tm->is_clone);
+
+ dm_sm_dec_block(tm->sm, b);
+}
+EXPORT_SYMBOL_GPL(dm_tm_dec);
+
+int dm_tm_ref(struct dm_transaction_manager *tm, dm_block_t b,
+ uint32_t *result)
+{
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ return dm_sm_get_count(tm->sm, b, result);
+}
+
+struct dm_block_manager *dm_tm_get_bm(struct dm_transaction_manager *tm)
+{
+ return tm->bm;
+}
+
+/*----------------------------------------------------------------*/
+
+static int dm_tm_create_internal(struct dm_block_manager *bm,
+ dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ size_t root_offset, size_t root_max_len,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm,
+ struct dm_block **sblock,
+ int create)
+{
+ int r;
+ struct dm_space_map *inner;
+
+ inner = dm_sm_metadata_init();
+ if (IS_ERR(inner))
+ return PTR_ERR(inner);
+
+ *tm = dm_tm_create(bm, inner);
+ if (IS_ERR(*tm)) {
+ dm_sm_destroy(inner);
+ return PTR_ERR(*tm);
+ }
+
+ if (create) {
+ r = dm_bm_write_lock_zero(dm_tm_get_bm(*tm), sb_location,
+ sb_validator, sblock);
+ if (r < 0) {
+ DMERR("couldn't lock superblock");
+ goto bad1;
+ }
+
+ r = dm_sm_metadata_create(inner, *tm, dm_bm_nr_blocks(bm),
+ sb_location);
+ if (r) {
+ DMERR("couldn't create metadata space map");
+ goto bad2;
+ }
+
+ *sm = dm_sm_checker_create(inner);
+ if (!*sm)
+ goto bad2;
+
+ } else {
+ r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location,
+ sb_validator, sblock);
+ if (r < 0) {
+ DMERR("couldn't lock superblock");
+ goto bad1;
+ }
+
+ r = dm_sm_metadata_open(inner, *tm,
+ dm_block_data(*sblock) + root_offset,
+ root_max_len);
+ if (r) {
+ DMERR("couldn't open metadata space map");
+ goto bad2;
+ }
+
+ *sm = dm_sm_checker_create(inner);
+ if (!*sm)
+ goto bad2;
+ }
+
+ return 0;
+
+bad2:
+ dm_tm_unlock(*tm, *sblock);
+bad1:
+ dm_tm_destroy(*tm);
+ dm_sm_destroy(inner);
+ return r;
+}
+
+int dm_tm_create_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock)
+{
+ return dm_tm_create_internal(bm, sb_location, sb_validator,
+ 0, 0, tm, sm, sblock, 1);
+}
+EXPORT_SYMBOL_GPL(dm_tm_create_with_sm);
+
+int dm_tm_open_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ size_t root_offset, size_t root_max_len,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock)
+{
+ return dm_tm_create_internal(bm, sb_location, sb_validator, root_offset,
+ root_max_len, tm, sm, sblock, 0);
+}
+EXPORT_SYMBOL_GPL(dm_tm_open_with_sm);
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-transaction-manager.h b/drivers/md/persistent-data/dm-transaction-manager.h
new file mode 100644
index 0000000..6da7848
--- /dev/null
+++ b/drivers/md/persistent-data/dm-transaction-manager.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_TRANSACTION_MANAGER_H
+#define _LINUX_DM_TRANSACTION_MANAGER_H
+
+#include "dm-block-manager.h"
+
+struct dm_transaction_manager;
+struct dm_space_map;
+
+/*----------------------------------------------------------------*/
+
+/*
+ * This manages the scope of a transaction. It also enforces immutability
+ * of the on-disk data structures by limiting access to writeable blocks.
+ *
+ * Clients should not fiddle with the block manager directly.
+ */
+
+void dm_tm_destroy(struct dm_transaction_manager *tm);
+
+/*
+ * The non-blocking version of a transaction manager is intended for use in
+ * fast path code that needs to do lookups e.g. a dm mapping function.
+ * You create the non-blocking variant from a normal tm. The interface is
+ * the same, except that most functions will just return -EWOULDBLOCK.
+ * Methods that return void yet may block should not be called on a clone
+ * viz. dm_tm_inc, dm_tm_dec. Call dm_tm_destroy() as you would with a normal
+ * tm when you've finished with it. You may not destroy the original prior
+ * to clones.
+ */
+struct dm_transaction_manager *dm_tm_create_non_blocking_clone(struct dm_transaction_manager *real);
+
+/*
+ * We use a 2-phase commit here.
+ *
+ * i) In the first phase the block manager is told to start flushing, and
+ * the changes to the space map are written to disk. You should interrogate
+ * your particular space map to get detail of its root node etc. to be
+ * included in your superblock.
+ *
+ * ii) @root will be committed last. You shouldn't use more than the
+ * first 512 bytes of @root if you wish the transaction to survive a power
+ * failure. You *must* have a write lock held on @root for both stage (i)
+ * and (ii). The commit will drop the write lock.
+ */
+int dm_tm_pre_commit(struct dm_transaction_manager *tm);
+int dm_tm_commit(struct dm_transaction_manager *tm, struct dm_block *root);
+
+/*
+ * These methods are the only way to get hold of a writeable block.
+ */
+
+/*
+ * dm_tm_new_block() is pretty self-explanatory. Make sure you do actually
+ * write to the whole of @data before you unlock, otherwise you could get
+ * a data leak. (The other option is for tm_new_block() to zero new blocks
+ * before handing them out, which will be redundant in most, if not all,
+ * cases).
+ * Zeroes the new block and returns with write lock held.
+ */
+int dm_tm_new_block(struct dm_transaction_manager *tm,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+/*
+ * dm_tm_shadow_block() allocates a new block and copies the data from @orig
+ * to it. It then decrements the reference count on original block. Use
+ * this to update the contents of a block in a data structure, don't
+ * confuse this with a clone - you shouldn't access the orig block after
+ * this operation. Because the tm knows the scope of the transaction it
+ * can optimise requests for a shadow of a shadow to a no-op. Don't forget
+ * to unlock when you've finished with the shadow.
+ *
+ * The @inc_children flag is used to tell the caller whether it needs to
+ * adjust reference counts for children. (Data in the block may refer to
+ * other blocks.)
+ *
+ * Shadowing implicitly drops a reference on @orig so you must not have
+ * it locked when you call this.
+ */
+int dm_tm_shadow_block(struct dm_transaction_manager *tm, dm_block_t orig,
+ struct dm_block_validator *v,
+ struct dm_block **result, int *inc_children);
+
+/*
+ * Read access. You can lock any block you want. If there's a write lock
+ * on it outstanding then it'll block.
+ */
+int dm_tm_read_lock(struct dm_transaction_manager *tm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+int dm_tm_unlock(struct dm_transaction_manager *tm, struct dm_block *b);
+
+/*
+ * Functions for altering the reference count of a block directly.
+ */
+void dm_tm_inc(struct dm_transaction_manager *tm, dm_block_t b);
+
+void dm_tm_dec(struct dm_transaction_manager *tm, dm_block_t b);
+
+int dm_tm_ref(struct dm_transaction_manager *tm, dm_block_t b,
+ uint32_t *result);
+
+struct dm_block_manager *dm_tm_get_bm(struct dm_transaction_manager *tm);
+
+/*
+ * A little utility that ties the knot by producing a transaction manager
+ * that has a space map managed by the transaction manager...
+ *
+ * Returns a tm that has an open transaction to write the new disk sm.
+ * Caller should store the new sm root and commit.
+ */
+int dm_tm_create_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock);
+
+int dm_tm_open_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ size_t root_offset, size_t root_max_len,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock);
+
+#endif /* _LINUX_DM_TRANSACTION_MANAGER_H */
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 132c18e..c025a82 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1355,7 +1355,7 @@
struct mirror_info *p = &conf->mirrors[mirror];
if (p->recovery_disabled == mddev->recovery_disabled)
continue;
- if (!p->rdev)
+ if (p->rdev)
continue;
disk_stack_limits(mddev->gendisk, rdev->bdev,
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 9af2140..f5d53a2 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -18,6 +18,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <media/saa7146.h>
LIST_HEAD(saa7146_devices);
@@ -35,10 +37,9 @@
{
int i = 0;
- INFO((" @ %li jiffies:\n",jiffies));
- for(i = 0; i <= 0x148; i+=4) {
- printk("0x%03x: 0x%08x\n",i,saa7146_read(dev,i));
- }
+ pr_info(" @ %li jiffies:\n", jiffies);
+ for (i = 0; i <= 0x148; i += 4)
+ pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i));
}
#endif
@@ -72,9 +73,8 @@
if (saa7146_read(dev, MC2) & 2)
break;
if (err) {
- printk(KERN_ERR "%s: %s timed out while waiting for "
- "registers getting programmed\n",
- dev->name, __func__);
+ pr_err("%s: %s timed out while waiting for registers getting programmed\n",
+ dev->name, __func__);
return -ETIMEDOUT;
}
msleep(1);
@@ -88,8 +88,8 @@
break;
saa7146_read(dev, MC2);
if (err) {
- DEB_S(("%s: %s timed out while waiting for transfer "
- "completion\n", dev->name, __func__));
+ DEB_S("%s: %s timed out while waiting for transfer completion\n",
+ dev->name, __func__);
return -ETIMEDOUT;
}
msleep(1);
@@ -109,9 +109,8 @@
if (saa7146_read(dev, MC2) & 2)
break;
if (!loops--) {
- printk(KERN_ERR "%s: %s timed out while waiting for "
- "registers getting programmed\n",
- dev->name, __func__);
+ pr_err("%s: %s timed out while waiting for registers getting programmed\n",
+ dev->name, __func__);
return -ETIMEDOUT;
}
udelay(1);
@@ -124,8 +123,8 @@
break;
saa7146_read(dev, MC2);
if (!loops--) {
- DEB_S(("%s: %s timed out while waiting for transfer "
- "completion\n", dev->name, __func__));
+ DEB_S("%s: %s timed out while waiting for transfer completion\n",
+ dev->name, __func__);
return -ETIMEDOUT;
}
udelay(5);
@@ -264,7 +263,9 @@
ptr = pt->cpu;
for (i = 0; i < sglen; i++, list++) {
/*
- printk("i:%d, adr:0x%08x, len:%d, offset:%d\n", i,sg_dma_address(list), sg_dma_len(list), list->offset);
+ pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n",
+ i, sg_dma_address(list), sg_dma_len(list),
+ list->offset);
*/
for (p = 0; p * 4096 < list->length; p++, ptr++) {
*ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
@@ -281,9 +282,9 @@
/*
ptr = pt->cpu;
- printk("offset: %d\n",pt->offset);
+ pr_debug("offset: %d\n", pt->offset);
for(i=0;i<5;i++) {
- printk("ptr1 %d: 0x%08x\n",i,ptr[i]);
+ pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]);
}
*/
return 0;
@@ -314,7 +315,7 @@
}
}
if (0 != (isr & (MASK_27))) {
- DEB_INT(("irq: RPS0 (0x%08x).\n",isr));
+ DEB_INT("irq: RPS0 (0x%08x)\n", isr);
if (dev->vv_data && dev->vv_callback)
dev->vv_callback(dev,isr);
isr &= ~MASK_27;
@@ -333,14 +334,15 @@
} else {
u32 psr = saa7146_read(dev, PSR);
u32 ssr = saa7146_read(dev, SSR);
- printk(KERN_WARNING "%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
- dev->name, isr, psr, ssr);
+ pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
+ dev->name, isr, psr, ssr);
}
isr &= ~(MASK_16|MASK_17);
}
if( 0 != isr ) {
- ERR(("warning: interrupt enabled, but not handled properly.(0x%08x)\n",isr));
- ERR(("disabling interrupt source(s)!\n"));
+ ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n",
+ isr);
+ ERR("disabling interrupt source(s)!\n");
SAA7146_IER_DISABLE(dev,isr);
}
saa7146_write(dev, ISR, ack_isr);
@@ -360,15 +362,15 @@
/* clear out mem for sure */
dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
if (!dev) {
- ERR(("out of memory.\n"));
+ ERR("out of memory\n");
goto out;
}
- DEB_EE(("pci:%p\n",pci));
+ DEB_EE("pci:%p\n", pci);
err = pci_enable_device(pci);
if (err < 0) {
- ERR(("pci_enable_device() failed.\n"));
+ ERR("pci_enable_device() failed\n");
goto err_free;
}
@@ -389,7 +391,7 @@
dev->mem = ioremap(pci_resource_start(pci, 0),
pci_resource_len(pci, 0));
if (!dev->mem) {
- ERR(("ioremap() failed.\n"));
+ ERR("ioremap() failed\n");
err = -ENODEV;
goto err_release;
}
@@ -414,7 +416,7 @@
err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED | IRQF_DISABLED,
dev->name, dev);
if (err < 0) {
- ERR(("request_irq() failed.\n"));
+ ERR("request_irq() failed\n");
goto err_unmap;
}
@@ -444,7 +446,9 @@
/* create a nice device name */
sprintf(dev->name, "saa7146 (%d)", saa7146_num);
- INFO(("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x).\n", dev->mem, dev->revision, pci->irq, pci->subsystem_vendor, pci->subsystem_device));
+ pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
+ dev->mem, dev->revision, pci->irq,
+ pci->subsystem_vendor, pci->subsystem_device);
dev->ext = ext;
mutex_init(&dev->v4l2_lock);
@@ -464,12 +468,12 @@
err = -ENODEV;
if (ext->probe && ext->probe(dev)) {
- DEB_D(("ext->probe() failed for %p. skipping device.\n",dev));
+ DEB_D("ext->probe() failed for %p. skipping device.\n", dev);
goto err_free_i2c;
}
if (ext->attach(dev, pci_ext)) {
- DEB_D(("ext->attach() failed for %p. skipping device.\n",dev));
+ DEB_D("ext->attach() failed for %p. skipping device.\n", dev);
goto err_free_i2c;
}
/* V4L extensions will set the pci drvdata to the v4l2_device in the
@@ -521,7 +525,7 @@
{ NULL, 0 }
}, *p;
- DEB_EE(("dev:%p\n",dev));
+ DEB_EE("dev:%p\n", dev);
dev->ext->detach(dev);
/* Zero the PCI drvdata after use. */
@@ -552,21 +556,21 @@
int saa7146_register_extension(struct saa7146_extension* ext)
{
- DEB_EE(("ext:%p\n",ext));
+ DEB_EE("ext:%p\n", ext);
ext->driver.name = ext->name;
ext->driver.id_table = ext->pci_tbl;
ext->driver.probe = saa7146_init_one;
ext->driver.remove = saa7146_remove_one;
- printk("saa7146: register extension '%s'.\n",ext->name);
+ pr_info("register extension '%s'\n", ext->name);
return pci_register_driver(&ext->driver);
}
int saa7146_unregister_extension(struct saa7146_extension* ext)
{
- DEB_EE(("ext:%p\n",ext));
- printk("saa7146: unregister extension '%s'.\n",ext->name);
+ DEB_EE("ext:%p\n", ext);
+ pr_info("unregister extension '%s'\n", ext->name);
pci_unregister_driver(&ext->driver);
return 0;
}
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 1bd3dd7..a9254614 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <media/saa7146_vv.h>
/****************************************************************************/
@@ -9,21 +11,23 @@
struct saa7146_vv *vv = dev->vv_data;
if (fh->resources & bit) {
- DEB_D(("already allocated! want: 0x%02x, cur:0x%02x\n",bit,vv->resources));
+ DEB_D("already allocated! want: 0x%02x, cur:0x%02x\n",
+ bit, vv->resources);
/* have it already allocated */
return 1;
}
/* is it free? */
if (vv->resources & bit) {
- DEB_D(("locked! vv->resources:0x%02x, we want:0x%02x\n",vv->resources,bit));
+ DEB_D("locked! vv->resources:0x%02x, we want:0x%02x\n",
+ vv->resources, bit);
/* no, someone else uses it */
return 0;
}
/* it's free, grab it */
- fh->resources |= bit;
+ fh->resources |= bit;
vv->resources |= bit;
- DEB_D(("res: get 0x%02x, cur:0x%02x\n",bit,vv->resources));
+ DEB_D("res: get 0x%02x, cur:0x%02x\n", bit, vv->resources);
return 1;
}
@@ -34,9 +38,9 @@
BUG_ON((fh->resources & bits) != bits);
- fh->resources &= ~bits;
+ fh->resources &= ~bits;
vv->resources &= ~bits;
- DEB_D(("res: put 0x%02x, cur:0x%02x\n",bits,vv->resources));
+ DEB_D("res: put 0x%02x, cur:0x%02x\n", bits, vv->resources);
}
@@ -47,7 +51,7 @@
struct saa7146_buf *buf)
{
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
- DEB_EE(("dev:%p, buf:%p\n",dev,buf));
+ DEB_EE("dev:%p, buf:%p\n", dev, buf);
BUG_ON(in_interrupt());
@@ -66,18 +70,19 @@
struct saa7146_buf *buf)
{
assert_spin_locked(&dev->slock);
- DEB_EE(("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf));
+ DEB_EE("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf);
BUG_ON(!q);
if (NULL == q->curr) {
q->curr = buf;
- DEB_D(("immediately activating buffer %p\n", buf));
+ DEB_D("immediately activating buffer %p\n", buf);
buf->activate(dev,buf,NULL);
} else {
list_add_tail(&buf->vb.queue,&q->queue);
buf->vb.state = VIDEOBUF_QUEUED;
- DEB_D(("adding buffer %p to queue. (active buffer present)\n", buf));
+ DEB_D("adding buffer %p to queue. (active buffer present)\n",
+ buf);
}
return 0;
}
@@ -87,14 +92,14 @@
int state)
{
assert_spin_locked(&dev->slock);
- DEB_EE(("dev:%p, dmaq:%p, state:%d\n", dev, q, state));
- DEB_EE(("q->curr:%p\n",q->curr));
+ DEB_EE("dev:%p, dmaq:%p, state:%d\n", dev, q, state);
+ DEB_EE("q->curr:%p\n", q->curr);
BUG_ON(!q->curr);
/* finish current buffer */
if (NULL == q->curr) {
- DEB_D(("aiii. no current buffer\n"));
+ DEB_D("aiii. no current buffer\n");
return;
}
@@ -112,7 +117,7 @@
BUG_ON(!q);
- DEB_INT(("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi));
+ DEB_INT("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi);
assert_spin_locked(&dev->slock);
if (!list_empty(&q->queue)) {
@@ -122,10 +127,11 @@
if (!list_empty(&q->queue))
next = list_entry(q->queue.next,struct saa7146_buf, vb.queue);
q->curr = buf;
- DEB_INT(("next buffer: buf:%p, prev:%p, next:%p\n", buf, q->queue.prev,q->queue.next));
+ DEB_INT("next buffer: buf:%p, prev:%p, next:%p\n",
+ buf, q->queue.prev, q->queue.next);
buf->activate(dev,buf,next);
} else {
- DEB_INT(("no next buffer. stopping.\n"));
+ DEB_INT("no next buffer. stopping.\n");
if( 0 != vbi ) {
/* turn off video-dma3 */
saa7146_write(dev,MC1, MASK_20);
@@ -162,11 +168,11 @@
struct saa7146_dev *dev = q->dev;
unsigned long flags;
- DEB_EE(("dev:%p, dmaq:%p\n", dev, q));
+ DEB_EE("dev:%p, dmaq:%p\n", dev, q);
spin_lock_irqsave(&dev->slock,flags);
if (q->curr) {
- DEB_D(("timeout on %p\n", q->curr));
+ DEB_D("timeout on %p\n", q->curr);
saa7146_buffer_finish(dev,q,VIDEOBUF_ERROR);
}
@@ -194,12 +200,12 @@
enum v4l2_buf_type type;
- DEB_EE(("file:%p, dev:%s\n", file, video_device_node_name(vdev)));
+ DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
if (mutex_lock_interruptible(&saa7146_devices_lock))
return -ERESTARTSYS;
- DEB_D(("using: %p\n",dev));
+ DEB_D("using: %p\n", dev);
type = vdev->vfl_type == VFL_TYPE_GRABBER
? V4L2_BUF_TYPE_VIDEO_CAPTURE
@@ -207,7 +213,7 @@
/* check if an extension is registered */
if( NULL == dev->ext ) {
- DEB_S(("no extension registered for this device.\n"));
+ DEB_S("no extension registered for this device\n");
result = -ENODEV;
goto out;
}
@@ -215,7 +221,7 @@
/* allocate per open data */
fh = kzalloc(sizeof(*fh),GFP_KERNEL);
if (NULL == fh) {
- DEB_S(("cannot allocate memory for per open data.\n"));
+ DEB_S("cannot allocate memory for per open data\n");
result = -ENOMEM;
goto out;
}
@@ -225,13 +231,13 @@
fh->type = type;
if( fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
- DEB_S(("initializing vbi...\n"));
+ DEB_S("initializing vbi...\n");
if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
result = saa7146_vbi_uops.open(dev,file);
if (dev->ext_vv_data->vbi_fops.open)
dev->ext_vv_data->vbi_fops.open(file);
} else {
- DEB_S(("initializing video...\n"));
+ DEB_S("initializing video...\n");
result = saa7146_video_uops.open(dev,file);
}
@@ -259,7 +265,7 @@
struct saa7146_fh *fh = file->private_data;
struct saa7146_dev *dev = fh->dev;
- DEB_EE(("file:%p\n", file));
+ DEB_EE("file:%p\n", file);
if (mutex_lock_interruptible(&saa7146_devices_lock))
return -ERESTARTSYS;
@@ -289,12 +295,14 @@
switch (fh->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE: {
- DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n",file, vma));
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n",
+ file, vma);
q = &fh->video_q;
break;
}
case V4L2_BUF_TYPE_VBI_CAPTURE: {
- DEB_EE(("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n",file, vma));
+ DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n",
+ file, vma);
q = &fh->vbi_q;
break;
}
@@ -312,14 +320,14 @@
struct videobuf_buffer *buf = NULL;
struct videobuf_queue *q;
- DEB_EE(("file:%p, poll:%p\n",file, wait));
+ DEB_EE("file:%p, poll:%p\n", file, wait);
if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
if( 0 == fh->vbi_q.streaming )
return videobuf_poll_stream(file, &fh->vbi_q, wait);
q = &fh->vbi_q;
} else {
- DEB_D(("using video queue.\n"));
+ DEB_D("using video queue\n");
q = &fh->video_q;
}
@@ -327,17 +335,17 @@
buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
if (!buf) {
- DEB_D(("buf == NULL!\n"));
+ DEB_D("buf == NULL!\n");
return POLLERR;
}
poll_wait(file, &buf->done, wait);
if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) {
- DEB_D(("poll succeeded!\n"));
+ DEB_D("poll succeeded!\n");
return POLLIN|POLLRDNORM;
}
- DEB_D(("nothing to poll for, buf->state:%d\n",buf->state));
+ DEB_D("nothing to poll for, buf->state:%d\n", buf->state);
return 0;
}
@@ -346,18 +354,20 @@
struct saa7146_fh *fh = file->private_data;
switch (fh->type) {
- case V4L2_BUF_TYPE_VIDEO_CAPTURE: {
-// DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun", file, data, (unsigned long)count));
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+/*
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun",
+ file, data, (unsigned long)count);
+*/
return saa7146_video_uops.read(file,data,count,ppos);
- }
- case V4L2_BUF_TYPE_VBI_CAPTURE: {
-// DEB_EE(("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n", file, data, (unsigned long)count));
+ case V4L2_BUF_TYPE_VBI_CAPTURE:
+/*
+ DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n",
+ file, data, (unsigned long)count);
+*/
if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
return saa7146_vbi_uops.read(file,data,count,ppos);
- else
- return -EINVAL;
- }
- break;
+ return -EINVAL;
default:
BUG();
return 0;
@@ -398,22 +408,22 @@
{
u32 isr = status;
- DEB_INT(("dev:%p, isr:0x%08x\n",dev,(u32)status));
+ DEB_INT("dev:%p, isr:0x%08x\n", dev, (u32)status);
if (0 != (isr & (MASK_27))) {
- DEB_INT(("irq: RPS0 (0x%08x).\n",isr));
+ DEB_INT("irq: RPS0 (0x%08x)\n", isr);
saa7146_video_uops.irq_done(dev,isr);
}
if (0 != (isr & (MASK_28))) {
u32 mc2 = saa7146_read(dev, MC2);
if( 0 != (mc2 & MASK_15)) {
- DEB_INT(("irq: RPS1 vbi workaround (0x%08x).\n",isr));
+ DEB_INT("irq: RPS1 vbi workaround (0x%08x)\n", isr);
wake_up(&dev->vv_data->vbi_wq);
saa7146_write(dev,MC2, MASK_31);
return;
}
- DEB_INT(("irq: RPS1 (0x%08x).\n",isr));
+ DEB_INT("irq: RPS1 (0x%08x)\n", isr);
saa7146_vbi_uops.irq_done(dev,isr);
}
}
@@ -429,13 +439,13 @@
vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL);
if (vv == NULL) {
- ERR(("out of memory. aborting.\n"));
+ ERR("out of memory. aborting.\n");
return -ENOMEM;
}
ext_vv->ops = saa7146_video_ioctl_ops;
ext_vv->core_ops = &saa7146_video_ioctl_ops;
- DEB_EE(("dev:%p\n",dev));
+ DEB_EE("dev:%p\n", dev);
/* set default values for video parts of the saa7146 */
saa7146_write(dev, BCS_CTRL, 0x80400040);
@@ -450,7 +460,7 @@
vv->d_clipping.cpu_addr = pci_alloc_consistent(dev->pci, SAA7146_CLIPPING_MEM, &vv->d_clipping.dma_handle);
if( NULL == vv->d_clipping.cpu_addr ) {
- ERR(("out of memory. aborting.\n"));
+ ERR("out of memory. aborting.\n");
kfree(vv);
return -1;
}
@@ -471,7 +481,7 @@
{
struct saa7146_vv *vv = dev->vv_data;
- DEB_EE(("dev:%p\n",dev));
+ DEB_EE("dev:%p\n", dev);
v4l2_device_unregister(&dev->v4l2_dev);
pci_free_consistent(dev->pci, SAA7146_CLIPPING_MEM, vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle);
@@ -490,7 +500,7 @@
int err;
int i;
- DEB_EE(("dev:%p, name:'%s', type:%d\n",dev,name,type));
+ DEB_EE("dev:%p, name:'%s', type:%d\n", dev, name, type);
// released by vfd->release
vfd = video_device_alloc();
@@ -509,13 +519,13 @@
err = video_register_device(vfd, type, -1);
if (err < 0) {
- ERR(("cannot register v4l2 device. skipping.\n"));
+ ERR("cannot register v4l2 device. skipping.\n");
video_device_release(vfd);
return err;
}
- INFO(("%s: registered device %s [v4l2]\n",
- dev->name, video_device_node_name(vfd)));
+ pr_info("%s: registered device %s [v4l2]\n",
+ dev->name, video_device_node_name(vfd));
*vid = vfd;
return 0;
@@ -524,7 +534,7 @@
int saa7146_unregister_device(struct video_device **vid, struct saa7146_dev* dev)
{
- DEB_EE(("dev:%p\n",dev));
+ DEB_EE("dev:%p\n", dev);
video_unregister_device(*vid);
*vid = NULL;
diff --git a/drivers/media/common/saa7146_hlp.c b/drivers/media/common/saa7146_hlp.c
index 1d1d8d2..79ad73a 100644
--- a/drivers/media/common/saa7146_hlp.c
+++ b/drivers/media/common/saa7146_hlp.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <media/saa7146_vv.h>
@@ -711,8 +713,8 @@
int depth = sfmt->depth;
- DEB_CAP(("[size=%dx%d,fields=%s]\n",
- width,height,v4l2_field_names[field]));
+ DEB_CAP("[size=%dx%d,fields=%s]\n",
+ width, height, v4l2_field_names[field]);
if( bytesperline != 0) {
vdma1.pitch = bytesperline*2;
@@ -837,8 +839,8 @@
BUG_ON(0 == buf->pt[1].dma);
BUG_ON(0 == buf->pt[2].dma);
- DEB_CAP(("[size=%dx%d,fields=%s]\n",
- width,height,v4l2_field_names[field]));
+ DEB_CAP("[size=%dx%d,fields=%s]\n",
+ width, height, v4l2_field_names[field]);
/* fixme: look at bytesperline! */
@@ -998,12 +1000,12 @@
struct saa7146_vv *vv = dev->vv_data;
u32 vdma1_prot_addr;
- DEB_CAP(("buf:%p, next:%p\n",buf,next));
+ DEB_CAP("buf:%p, next:%p\n", buf, next);
vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
if( 0 == vdma1_prot_addr ) {
/* clear out beginning of streaming bit (rps register 0)*/
- DEB_CAP(("forcing sync to new frame\n"));
+ DEB_CAP("forcing sync to new frame\n");
saa7146_write(dev, MC2, MASK_27 );
}
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index b2ba9dc..2202719 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -1,8 +1,10 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <media/saa7146_vv.h>
static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
{
-//fm DEB_I2C(("'%s'.\n", adapter->name));
+ /* DEB_I2C("'%s'\n", adapter->name); */
return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_QUICK
@@ -14,9 +16,7 @@
static inline u32 saa7146_i2c_status(struct saa7146_dev *dev)
{
u32 iicsta = saa7146_read(dev, I2C_STATUS);
-/*
- DEB_I2C(("status: 0x%08x\n",iicsta));
-*/
+ /* DEB_I2C("status: 0x%08x\n", iicsta); */
return iicsta;
}
@@ -39,10 +39,11 @@
plus one extra byte to address the device */
mem = 1 + ((mem-1) / 3);
- /* we assume that op points to a memory of at least SAA7146_I2C_MEM bytes
- size. if we exceed this limit... */
- if ( (4*mem) > SAA7146_I2C_MEM ) {
-//fm DEB_I2C(("cannot prepare i2c-message.\n"));
+ /* we assume that op points to a memory of at least
+ * SAA7146_I2C_MEM bytes size. if we exceed this limit...
+ */
+ if ((4 * mem) > SAA7146_I2C_MEM) {
+ /* DEB_I2C("cannot prepare i2c-message\n"); */
return -ENOMEM;
}
@@ -123,7 +124,7 @@
if ( 0 != ( status & SAA7146_I2C_BUSY) ) {
/* yes, kill ongoing operation */
- DEB_I2C(("busy_state detected.\n"));
+ DEB_I2C("busy_state detected\n");
/* set "ABORT-OPERATION"-bit (bit 7)*/
saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
@@ -141,7 +142,7 @@
if ( dev->i2c_bitrate != status ) {
- DEB_I2C(("error_state detected. status:0x%08x\n",status));
+ DEB_I2C("error_state detected. status:0x%08x\n", status);
/* Repeat the abort operation. This seems to be necessary
after serious protocol errors caused by e.g. the SAA7740 */
@@ -164,7 +165,7 @@
/* if any error is still present, a fatal error has occurred ... */
status = saa7146_i2c_status(dev);
if ( dev->i2c_bitrate != status ) {
- DEB_I2C(("fatal error. status:0x%08x\n",status));
+ DEB_I2C("fatal error. status:0x%08x\n", status);
return -1;
}
@@ -181,7 +182,8 @@
unsigned long timeout;
/* write out i2c-command */
- DEB_I2C(("before: 0x%08x (status: 0x%08x), %d\n",*dword,saa7146_read(dev, I2C_STATUS), dev->i2c_op));
+ DEB_I2C("before: 0x%08x (status: 0x%08x), %d\n",
+ *dword, saa7146_read(dev, I2C_STATUS), dev->i2c_op);
if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
@@ -202,7 +204,7 @@
/* a signal arrived */
return -ERESTARTSYS;
- printk(KERN_WARNING "%s %s [irq]: timed out waiting for end of xfer\n",
+ pr_warn("%s %s [irq]: timed out waiting for end of xfer\n",
dev->name, __func__);
return -EIO;
}
@@ -220,7 +222,7 @@
break;
}
if (time_after(jiffies,timeout)) {
- printk(KERN_WARNING "%s %s: timed out waiting for MC2\n",
+ pr_warn("%s %s: timed out waiting for MC2\n",
dev->name, __func__);
return -EIO;
}
@@ -237,7 +239,7 @@
/* this is normal when probing the bus
* (no answer from nonexisistant device...)
*/
- printk(KERN_WARNING "%s %s [poll]: timed out waiting for end of xfer\n",
+ pr_warn("%s %s [poll]: timed out waiting for end of xfer\n",
dev->name, __func__);
return -EIO;
}
@@ -257,24 +259,24 @@
if ( 0 == (status & SAA7146_I2C_ERR) ||
0 == (status & SAA7146_I2C_BUSY) ) {
/* it may take some time until ERR goes high - ignore */
- DEB_I2C(("unexpected i2c status %04x\n", status));
+ DEB_I2C("unexpected i2c status %04x\n", status);
}
if( 0 != (status & SAA7146_I2C_SPERR) ) {
- DEB_I2C(("error due to invalid start/stop condition.\n"));
+ DEB_I2C("error due to invalid start/stop condition\n");
}
if( 0 != (status & SAA7146_I2C_DTERR) ) {
- DEB_I2C(("error in data transmission.\n"));
+ DEB_I2C("error in data transmission\n");
}
if( 0 != (status & SAA7146_I2C_DRERR) ) {
- DEB_I2C(("error when receiving data.\n"));
+ DEB_I2C("error when receiving data\n");
}
if( 0 != (status & SAA7146_I2C_AL) ) {
- DEB_I2C(("error because arbitration lost.\n"));
+ DEB_I2C("error because arbitration lost\n");
}
/* we handle address-errors here */
if( 0 != (status & SAA7146_I2C_APERR) ) {
- DEB_I2C(("error in address phase.\n"));
+ DEB_I2C("error in address phase\n");
return -EREMOTEIO;
}
@@ -284,7 +286,7 @@
/* read back data, just in case we were reading ... */
*dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER));
- DEB_I2C(("after: 0x%08x\n",*dword));
+ DEB_I2C("after: 0x%08x\n", *dword);
return 0;
}
@@ -299,7 +301,7 @@
return -ERESTARTSYS;
for(i=0;i<num;i++) {
- DEB_I2C(("msg:%d/%d\n",i+1,num));
+ DEB_I2C("msg:%d/%d\n", i+1, num);
}
/* prepare the message(s), get number of u32s to transfer */
@@ -316,7 +318,7 @@
/* reset the i2c-device if necessary */
err = saa7146_i2c_reset(dev);
if ( 0 > err ) {
- DEB_I2C(("could not reset i2c-device.\n"));
+ DEB_I2C("could not reset i2c-device\n");
goto out;
}
@@ -336,7 +338,7 @@
address error and trust the saa7146 address error detection. */
if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags))
goto out;
- DEB_I2C(("error while sending message(s). starting again.\n"));
+ DEB_I2C("error while sending message(s). starting again\n");
break;
}
}
@@ -356,13 +358,13 @@
/* if any things had to be read, get the results */
if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) {
- DEB_I2C(("could not cleanup i2c-message.\n"));
+ DEB_I2C("could not cleanup i2c-message\n");
err = -1;
goto out;
}
/* return the number of delivered messages */
- DEB_I2C(("transmission successful. (msg:%d).\n",err));
+ DEB_I2C("transmission successful. (msg:%d)\n", err);
out:
/* another bug in revision 0: the i2c-registers get uploaded randomly by other
uploads, so we better clear them out before continuing */
@@ -370,7 +372,7 @@
__le32 zero = 0;
saa7146_i2c_reset(dev);
if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) {
- INFO(("revision 0 error. this should never happen.\n"));
+ pr_info("revision 0 error. this should never happen\n");
}
}
@@ -400,7 +402,7 @@
int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate)
{
- DEB_EE(("bitrate: 0x%08x\n",bitrate));
+ DEB_EE("bitrate: 0x%08x\n", bitrate);
/* enable i2c-port pins */
saa7146_write(dev, MC1, (MASK_08 | MASK_24));
diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c
index afe8580..b2e7183 100644
--- a/drivers/media/common/saa7146_vbi.c
+++ b/drivers/media/common/saa7146_vbi.c
@@ -14,7 +14,7 @@
DECLARE_WAITQUEUE(wait, current);
- DEB_VBI(("dev:%p\n",dev));
+ DEB_VBI("dev:%p\n", dev);
/* once again, a bug in the saa7146: the brs acquisition
is buggy and especially the BXO-counter does not work
@@ -40,14 +40,14 @@
WRITE_RPS1(0xc000008c);
/* wait for vbi_a or vbi_b*/
if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
- DEB_D(("...using port b\n"));
+ DEB_D("...using port b\n");
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B);
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B);
/*
WRITE_RPS1(CMD_PAUSE | MASK_09);
*/
} else {
- DEB_D(("...using port a\n"));
+ DEB_D("...using port a\n");
WRITE_RPS1(CMD_PAUSE | MASK_10);
}
/* upload brs */
@@ -103,7 +103,7 @@
schedule();
- DEB_VBI(("brs bug workaround %d/1.\n",i));
+ DEB_VBI("brs bug workaround %d/1\n", i);
remove_wait_queue(&vv->vbi_wq, &wait);
current->state = TASK_RUNNING;
@@ -116,7 +116,8 @@
if(signal_pending(current)) {
- DEB_VBI(("aborted (rps:0x%08x).\n",saa7146_read(dev,RPS_ADDR1)));
+ DEB_VBI("aborted (rps:0x%08x)\n",
+ saa7146_read(dev, RPS_ADDR1));
/* stop rps1 for sure */
saa7146_write(dev, MC1, MASK_29);
@@ -207,7 +208,7 @@
struct saa7146_vv *vv = dev->vv_data;
buf->vb.state = VIDEOBUF_ACTIVE;
- DEB_VBI(("dev:%p, buf:%p, next:%p\n",dev,buf,next));
+ DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next);
saa7146_set_vbi_capture(dev,buf,next);
mod_timer(&vv->vbi_q.timeout, jiffies+BUFFER_TIMEOUT);
@@ -228,10 +229,10 @@
llength = vbi_pixel_to_capture;
size = lines * llength;
- DEB_VBI(("vb:%p\n",vb));
+ DEB_VBI("vb:%p\n", vb);
if (0 != buf->vb.baddr && buf->vb.bsize < size) {
- DEB_VBI(("size mismatch.\n"));
+ DEB_VBI("size mismatch\n");
return -EINVAL;
}
@@ -263,7 +264,7 @@
return 0;
oops:
- DEB_VBI(("error out.\n"));
+ DEB_VBI("error out\n");
saa7146_dma_free(dev,q,buf);
return err;
@@ -279,7 +280,7 @@
*size = lines * llength;
*count = 2;
- DEB_VBI(("count:%d, size:%d\n",*count,*size));
+ DEB_VBI("count:%d, size:%d\n", *count, *size);
return 0;
}
@@ -292,7 +293,7 @@
struct saa7146_vv *vv = dev->vv_data;
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
- DEB_VBI(("vb:%p\n",vb));
+ DEB_VBI("vb:%p\n", vb);
saa7146_buffer_queue(dev,&vv->vbi_q,buf);
}
@@ -303,7 +304,7 @@
struct saa7146_dev *dev = fh->dev;
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
- DEB_VBI(("vb:%p\n",vb));
+ DEB_VBI("vb:%p\n", vb);
saa7146_dma_free(dev,q,buf);
}
@@ -321,7 +322,7 @@
struct saa7146_dev *dev = fh->dev;
struct saa7146_vv *vv = dev->vv_data;
unsigned long flags;
- DEB_VBI(("dev:%p, fh:%p\n",dev, fh));
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
spin_lock_irqsave(&dev->slock,flags);
@@ -354,14 +355,14 @@
struct saa7146_fh *fh = file->private_data;
struct saa7146_dev *dev = fh->dev;
- DEB_VBI(("dev:%p, fh:%p\n",dev, fh));
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
vbi_stop(fh, file);
}
static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
{
- DEB_VBI(("dev:%p\n",dev));
+ DEB_VBI("dev:%p\n", dev);
INIT_LIST_HEAD(&vv->vbi_q.queue);
@@ -380,11 +381,11 @@
u32 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
int ret = 0;
- DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS);
if (0 == ret) {
- DEB_S(("cannot get vbi RESOURCE_DMA3_BRS resource\n"));
+ DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n");
return -EBUSY;
}
@@ -425,7 +426,7 @@
saa7146_write(dev, BRS_CTRL, 0x00000001);
if (0 != (ret = vbi_workaround(dev))) {
- DEB_VBI(("vbi workaround failed!\n"));
+ DEB_VBI("vbi workaround failed!\n");
/* return ret;*/
}
}
@@ -439,7 +440,7 @@
{
struct saa7146_fh *fh = file->private_data;
struct saa7146_vv *vv = dev->vv_data;
- DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
if( fh == vv->vbi_streaming ) {
vbi_stop(fh, file);
@@ -453,13 +454,13 @@
spin_lock(&dev->slock);
if (vv->vbi_q.curr) {
- DEB_VBI(("dev:%p, curr:%p\n",dev,vv->vbi_q.curr));
+ DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_q.curr);
/* this must be += 2, one count for each field */
vv->vbi_fieldcount+=2;
vv->vbi_q.curr->vb.field_count = vv->vbi_fieldcount;
saa7146_buffer_finish(dev,&vv->vbi_q,VIDEOBUF_DONE);
} else {
- DEB_VBI(("dev:%p\n",dev));
+ DEB_VBI("dev:%p\n", dev);
}
saa7146_buffer_next(dev,&vv->vbi_q,1);
@@ -473,7 +474,7 @@
struct saa7146_vv *vv = dev->vv_data;
ssize_t ret = 0;
- DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
+ DEB_VBI("dev:%p, fh:%p\n", dev, fh);
if( NULL == vv->vbi_streaming ) {
// fixme: check if dma3 is available
@@ -482,7 +483,8 @@
}
if( fh != vv->vbi_streaming ) {
- DEB_VBI(("open %p is already using vbi capture.",vv->vbi_streaming));
+ DEB_VBI("open %p is already using vbi capture\n",
+ vv->vbi_streaming);
return -EBUSY;
}
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 9aafa4e..384b358 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <media/saa7146_vv.h>
#include <media/v4l2-chip-ident.h>
@@ -94,7 +96,7 @@
}
}
- DEB_D(("unknown pixelformat:'%4.4s'\n",(char *)&fourcc));
+ DEB_D("unknown pixelformat:'%4.4s'\n", (char *)&fourcc);
return NULL;
}
@@ -107,32 +109,32 @@
struct v4l2_format fmt;
int ret = 0, err = 0;
- DEB_EE(("dev:%p, fh:%p\n",dev,fh));
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
/* check if we have overlay informations */
if( NULL == fh->ov.fh ) {
- DEB_D(("no overlay data available. try S_FMT first.\n"));
+ DEB_D("no overlay data available. try S_FMT first.\n");
return -EAGAIN;
}
/* check if streaming capture is running */
if (IS_CAPTURE_ACTIVE(fh) != 0) {
- DEB_D(("streaming capture is active.\n"));
+ DEB_D("streaming capture is active\n");
return -EBUSY;
}
/* check if overlay is running */
if (IS_OVERLAY_ACTIVE(fh) != 0) {
if (vv->video_fh == fh) {
- DEB_D(("overlay is already active.\n"));
+ DEB_D("overlay is already active\n");
return 0;
}
- DEB_D(("overlay is already active in another open.\n"));
+ DEB_D("overlay is already active in another open\n");
return -EBUSY;
}
if (0 == saa7146_res_get(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP)) {
- DEB_D(("cannot get necessary overlay resources\n"));
+ DEB_D("cannot get necessary overlay resources\n");
return -EBUSY;
}
@@ -145,13 +147,13 @@
fh->ov.win = fmt.fmt.win;
vv->ov_data = &fh->ov;
- DEB_D(("%dx%d+%d+%d %s field=%s\n",
- fh->ov.win.w.width,fh->ov.win.w.height,
- fh->ov.win.w.left,fh->ov.win.w.top,
- vv->ov_fmt->name,v4l2_field_names[fh->ov.win.field]));
+ DEB_D("%dx%d+%d+%d %s field=%s\n",
+ fh->ov.win.w.width, fh->ov.win.w.height,
+ fh->ov.win.w.left, fh->ov.win.w.top,
+ vv->ov_fmt->name, v4l2_field_names[fh->ov.win.field]);
if (0 != (ret = saa7146_enable_overlay(fh))) {
- DEB_D(("enabling overlay failed: %d\n",ret));
+ DEB_D("enabling overlay failed: %d\n", ret);
saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
return ret;
}
@@ -168,22 +170,22 @@
struct saa7146_dev *dev = fh->dev;
struct saa7146_vv *vv = dev->vv_data;
- DEB_EE(("dev:%p, fh:%p\n",dev,fh));
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
/* check if streaming capture is running */
if (IS_CAPTURE_ACTIVE(fh) != 0) {
- DEB_D(("streaming capture is active.\n"));
+ DEB_D("streaming capture is active\n");
return -EBUSY;
}
/* check if overlay is running at all */
if ((vv->video_status & STATUS_OVERLAY) == 0) {
- DEB_D(("no active overlay.\n"));
+ DEB_D("no active overlay\n");
return 0;
}
if (vv->video_fh != fh) {
- DEB_D(("overlay is active, but in another open.\n"));
+ DEB_D("overlay is active, but in another open\n");
return -EBUSY;
}
@@ -268,7 +270,7 @@
int length = dma->sglen;
struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
- DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
+ DEB_EE("dev:%p, buf:%p, sg_len:%d\n", dev, buf, length);
if( 0 != IS_PLANAR(sfmt->trans)) {
struct saa7146_pgtable *pt1 = &buf->pt[0];
@@ -288,7 +290,8 @@
m3 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
o1 = size%PAGE_SIZE;
o2 = (size+(size/4))%PAGE_SIZE;
- DEB_CAP(("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",size,m1,m2,m3,o1,o2));
+ DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+ size, m1, m2, m3, o1, o2);
break;
}
case 16: {
@@ -298,7 +301,8 @@
m3 = ((2*size+PAGE_SIZE)/PAGE_SIZE)-1;
o1 = size%PAGE_SIZE;
o2 = (size+(size/2))%PAGE_SIZE;
- DEB_CAP(("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",size,m1,m2,m3,o1,o2));
+ DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+ size, m1, m2, m3, o1, o2);
break;
}
default: {
@@ -387,23 +391,23 @@
unsigned int resource;
int ret = 0, err = 0;
- DEB_EE(("dev:%p, fh:%p\n",dev,fh));
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
if ((vv->video_status & STATUS_CAPTURE) != 0) {
if (vv->video_fh == fh) {
- DEB_S(("already capturing.\n"));
+ DEB_S("already capturing\n");
return 0;
}
- DEB_S(("already capturing in another open.\n"));
+ DEB_S("already capturing in another open\n");
return -EBUSY;
}
if ((vv->video_status & STATUS_OVERLAY) != 0) {
- DEB_S(("warning: suspending overlay video for streaming capture.\n"));
+ DEB_S("warning: suspending overlay video for streaming capture\n");
vv->ov_suspend = vv->video_fh;
err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
if (0 != err) {
- DEB_D(("suspending video failed. aborting\n"));
+ DEB_D("suspending video failed. aborting\n");
return err;
}
}
@@ -420,7 +424,7 @@
ret = saa7146_res_get(fh, resource);
if (0 == ret) {
- DEB_S(("cannot get capture resource %d\n",resource));
+ DEB_S("cannot get capture resource %d\n", resource);
if (vv->ov_suspend != NULL) {
saa7146_start_preview(vv->ov_suspend);
vv->ov_suspend = NULL;
@@ -448,15 +452,15 @@
unsigned long flags;
unsigned int resource;
u32 dmas = 0;
- DEB_EE(("dev:%p, fh:%p\n",dev,fh));
+ DEB_EE("dev:%p, fh:%p\n", dev, fh);
if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
- DEB_S(("not capturing.\n"));
+ DEB_S("not capturing\n");
return 0;
}
if (vv->video_fh != fh) {
- DEB_S(("capturing, but in another open.\n"));
+ DEB_S("capturing, but in another open\n");
return -EBUSY;
}
@@ -530,7 +534,7 @@
struct saa7146_vv *vv = dev->vv_data;
struct saa7146_format *fmt;
- DEB_EE(("VIDIOC_S_FBUF\n"));
+ DEB_EE("VIDIOC_S_FBUF\n");
if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
return -EPERM;
@@ -542,13 +546,13 @@
/* planar formats are not allowed for overlay video, clipping and video dma would clash */
if (fmt->flags & FORMAT_IS_PLANAR)
- DEB_S(("planar pixelformat '%4.4s' not allowed for overlay\n",
- (char *)&fmt->pixelformat));
+ DEB_S("planar pixelformat '%4.4s' not allowed for overlay\n",
+ (char *)&fmt->pixelformat);
/* check if overlay is running */
if (IS_OVERLAY_ACTIVE(fh) != 0) {
if (vv->video_fh != fh) {
- DEB_D(("refusing to change framebuffer informations while overlay is active in another open.\n"));
+ DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
return -EBUSY;
}
}
@@ -559,7 +563,7 @@
if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) {
vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8;
- DEB_D(("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline));
+ DEB_D("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline);
}
return 0;
}
@@ -588,7 +592,7 @@
if (ctrl == NULL)
return -EINVAL;
- DEB_EE(("VIDIOC_QUERYCTRL: id:%d\n", c->id));
+ DEB_EE("VIDIOC_QUERYCTRL: id:%d\n", c->id);
*c = *ctrl;
return 0;
}
@@ -607,25 +611,25 @@
case V4L2_CID_BRIGHTNESS:
value = saa7146_read(dev, BCS_CTRL);
c->value = 0xff & (value >> 24);
- DEB_D(("V4L2_CID_BRIGHTNESS: %d\n", c->value));
+ DEB_D("V4L2_CID_BRIGHTNESS: %d\n", c->value);
break;
case V4L2_CID_CONTRAST:
value = saa7146_read(dev, BCS_CTRL);
c->value = 0x7f & (value >> 16);
- DEB_D(("V4L2_CID_CONTRAST: %d\n", c->value));
+ DEB_D("V4L2_CID_CONTRAST: %d\n", c->value);
break;
case V4L2_CID_SATURATION:
value = saa7146_read(dev, BCS_CTRL);
c->value = 0x7f & (value >> 0);
- DEB_D(("V4L2_CID_SATURATION: %d\n", c->value));
+ DEB_D("V4L2_CID_SATURATION: %d\n", c->value);
break;
case V4L2_CID_VFLIP:
c->value = vv->vflip;
- DEB_D(("V4L2_CID_VFLIP: %d\n", c->value));
+ DEB_D("V4L2_CID_VFLIP: %d\n", c->value);
break;
case V4L2_CID_HFLIP:
c->value = vv->hflip;
- DEB_D(("V4L2_CID_HFLIP: %d\n", c->value));
+ DEB_D("V4L2_CID_HFLIP: %d\n", c->value);
break;
default:
return -EINVAL;
@@ -641,7 +645,7 @@
ctrl = ctrl_by_id(c->id);
if (NULL == ctrl) {
- DEB_D(("unknown control %d\n", c->id));
+ DEB_D("unknown control %d\n", c->id);
return -EINVAL;
}
@@ -686,14 +690,14 @@
case V4L2_CID_HFLIP:
/* fixme: we can support changing VFLIP and HFLIP here... */
if (IS_CAPTURE_ACTIVE(fh) != 0) {
- DEB_D(("V4L2_CID_HFLIP while active capture.\n"));
+ DEB_D("V4L2_CID_HFLIP while active capture\n");
return -EBUSY;
}
vv->hflip = c->value;
break;
case V4L2_CID_VFLIP:
if (IS_CAPTURE_ACTIVE(fh) != 0) {
- DEB_D(("V4L2_CID_VFLIP while active capture.\n"));
+ DEB_D("V4L2_CID_VFLIP while active capture\n");
return -EBUSY;
}
vv->vflip = c->value;
@@ -748,7 +752,7 @@
int maxw, maxh;
int calc_bpl;
- DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh));
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
if (NULL == fmt)
@@ -777,7 +781,7 @@
vv->last_field = V4L2_FIELD_INTERLACED;
break;
default:
- DEB_D(("no known field mode '%d'.\n", field));
+ DEB_D("no known field mode '%d'\n", field);
return -EINVAL;
}
@@ -796,8 +800,9 @@
f->fmt.pix.bytesperline = calc_bpl;
f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
- DEB_D(("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n", f->fmt.pix.width,
- f->fmt.pix.height, f->fmt.pix.bytesperline, f->fmt.pix.sizeimage));
+ DEB_D("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n",
+ f->fmt.pix.width, f->fmt.pix.height,
+ f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
return 0;
}
@@ -811,22 +816,23 @@
enum v4l2_field field;
int maxw, maxh;
- DEB_EE(("dev:%p\n", dev));
+ DEB_EE("dev:%p\n", dev);
if (NULL == vv->ov_fb.base) {
- DEB_D(("no fb base set.\n"));
+ DEB_D("no fb base set\n");
return -EINVAL;
}
if (NULL == vv->ov_fmt) {
- DEB_D(("no fb fmt set.\n"));
+ DEB_D("no fb fmt set\n");
return -EINVAL;
}
if (win->w.width < 48 || win->w.height < 32) {
- DEB_D(("min width/height. (%d,%d)\n", win->w.width, win->w.height));
+ DEB_D("min width/height. (%d,%d)\n",
+ win->w.width, win->w.height);
return -EINVAL;
}
if (win->clipcount > 16) {
- DEB_D(("clipcount too big.\n"));
+ DEB_D("clipcount too big\n");
return -EINVAL;
}
@@ -848,7 +854,7 @@
case V4L2_FIELD_INTERLACED:
break;
default:
- DEB_D(("no known field mode '%d'.\n", field));
+ DEB_D("no known field mode '%d'\n", field);
return -EINVAL;
}
@@ -868,16 +874,17 @@
struct saa7146_vv *vv = dev->vv_data;
int err;
- DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh));
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
if (IS_CAPTURE_ACTIVE(fh) != 0) {
- DEB_EE(("streaming capture is active\n"));
+ DEB_EE("streaming capture is active\n");
return -EBUSY;
}
err = vidioc_try_fmt_vid_cap(file, fh, f);
if (0 != err)
return err;
fh->video_fmt = f->fmt.pix;
- DEB_EE(("set to pixelformat '%4.4s'\n", (char *)&fh->video_fmt.pixelformat));
+ DEB_EE("set to pixelformat '%4.4s'\n",
+ (char *)&fh->video_fmt.pixelformat);
return 0;
}
@@ -888,7 +895,7 @@
struct saa7146_vv *vv = dev->vv_data;
int err;
- DEB_EE(("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh));
+ DEB_EE("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh);
err = vidioc_try_fmt_vid_overlay(file, fh, f);
if (0 != err)
return err;
@@ -931,7 +938,7 @@
if (e->index < 0 )
return -EINVAL;
if( e->index < dev->ext_vv_data->num_stds ) {
- DEB_EE(("VIDIOC_ENUMSTD: index:%d\n",e->index));
+ DEB_EE("VIDIOC_ENUMSTD: index:%d\n", e->index);
v4l2_video_std_construct(e, dev->ext_vv_data->stds[e->index].id, dev->ext_vv_data->stds[e->index].name);
return 0;
}
@@ -946,10 +953,10 @@
int found = 0;
int err, i;
- DEB_EE(("VIDIOC_S_STD\n"));
+ DEB_EE("VIDIOC_S_STD\n");
if ((vv->video_status & STATUS_CAPTURE) == STATUS_CAPTURE) {
- DEB_D(("cannot change video standard while streaming capture is active\n"));
+ DEB_D("cannot change video standard while streaming capture is active\n");
return -EBUSY;
}
@@ -957,7 +964,7 @@
vv->ov_suspend = vv->video_fh;
err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
if (0 != err) {
- DEB_D(("suspending video failed. aborting\n"));
+ DEB_D("suspending video failed. aborting\n");
return err;
}
}
@@ -978,11 +985,11 @@
}
if (!found) {
- DEB_EE(("VIDIOC_S_STD: standard not found.\n"));
+ DEB_EE("VIDIOC_S_STD: standard not found\n");
return -EINVAL;
}
- DEB_EE(("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name));
+ DEB_EE("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name);
return 0;
}
@@ -990,7 +997,7 @@
{
int err;
- DEB_D(("VIDIOC_OVERLAY on:%d\n", on));
+ DEB_D("VIDIOC_OVERLAY on:%d\n", on);
if (on)
err = saa7146_start_preview(fh);
else
@@ -1047,7 +1054,7 @@
struct saa7146_fh *fh = __fh;
int err;
- DEB_D(("VIDIOC_STREAMON, type:%d\n", type));
+ DEB_D("VIDIOC_STREAMON, type:%d\n", type);
err = video_begin(fh);
if (err)
@@ -1066,18 +1073,18 @@
struct saa7146_vv *vv = dev->vv_data;
int err;
- DEB_D(("VIDIOC_STREAMOFF, type:%d\n", type));
+ DEB_D("VIDIOC_STREAMOFF, type:%d\n", type);
/* ugly: we need to copy some checks from video_end(),
because videobuf_streamoff() relies on the capture running.
check and fix this */
if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
- DEB_S(("not capturing.\n"));
+ DEB_S("not capturing\n");
return 0;
}
if (vv->video_fh != fh) {
- DEB_S(("capturing, but in another open.\n"));
+ DEB_S("capturing, but in another open\n");
return -EBUSY;
}
@@ -1087,7 +1094,7 @@
else if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
err = videobuf_streamoff(&fh->vbi_q);
if (0 != err) {
- DEB_D(("warning: videobuf_streamoff() failed.\n"));
+ DEB_D("warning: videobuf_streamoff() failed\n");
video_end(fh, file);
} else {
err = video_end(fh, file);
@@ -1174,25 +1181,27 @@
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
int size,err = 0;
- DEB_CAP(("vbuf:%p\n",vb));
+ DEB_CAP("vbuf:%p\n", vb);
/* sanity checks */
if (fh->video_fmt.width < 48 ||
fh->video_fmt.height < 32 ||
fh->video_fmt.width > vv->standard->h_max_out ||
fh->video_fmt.height > vv->standard->v_max_out) {
- DEB_D(("w (%d) / h (%d) out of bounds.\n",fh->video_fmt.width,fh->video_fmt.height));
+ DEB_D("w (%d) / h (%d) out of bounds\n",
+ fh->video_fmt.width, fh->video_fmt.height);
return -EINVAL;
}
size = fh->video_fmt.sizeimage;
if (0 != buf->vb.baddr && buf->vb.bsize < size) {
- DEB_D(("size mismatch.\n"));
+ DEB_D("size mismatch\n");
return -EINVAL;
}
- DEB_CAP(("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n",
- fh->video_fmt.width,fh->video_fmt.height,size,v4l2_field_names[fh->video_fmt.field]));
+ DEB_CAP("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n",
+ fh->video_fmt.width, fh->video_fmt.height,
+ size, v4l2_field_names[fh->video_fmt.field]);
if (buf->vb.width != fh->video_fmt.width ||
buf->vb.bytesperline != fh->video_fmt.bytesperline ||
buf->vb.height != fh->video_fmt.height ||
@@ -1238,7 +1247,7 @@
return 0;
oops:
- DEB_D(("error out.\n"));
+ DEB_D("error out\n");
saa7146_dma_free(dev,q,buf);
return err;
@@ -1259,7 +1268,7 @@
*count = (max_memory*1048576) / *size;
}
- DEB_CAP(("%d buffers, %d bytes each.\n",*count,*size));
+ DEB_CAP("%d buffers, %d bytes each\n", *count, *size);
return 0;
}
@@ -1272,7 +1281,7 @@
struct saa7146_vv *vv = dev->vv_data;
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
- DEB_CAP(("vbuf:%p\n",vb));
+ DEB_CAP("vbuf:%p\n", vb);
saa7146_buffer_queue(fh->dev,&vv->video_q,buf);
}
@@ -1283,7 +1292,7 @@
struct saa7146_dev *dev = fh->dev;
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
- DEB_CAP(("vbuf:%p\n",vb));
+ DEB_CAP("vbuf:%p\n", vb);
saa7146_dma_free(dev,q,buf);
@@ -1347,18 +1356,14 @@
struct saa7146_fh *fh = file->private_data;
struct saa7146_vv *vv = dev->vv_data;
struct videobuf_queue *q = &fh->video_q;
- int err;
- if (IS_CAPTURE_ACTIVE(fh) != 0) {
- err = video_end(fh, file);
- } else if (IS_OVERLAY_ACTIVE(fh) != 0) {
- err = saa7146_stop_preview(fh);
- }
+ if (IS_CAPTURE_ACTIVE(fh) != 0)
+ video_end(fh, file);
+ else if (IS_OVERLAY_ACTIVE(fh) != 0)
+ saa7146_stop_preview(fh);
videobuf_stop(q);
-
/* hmm, why is this function declared void? */
- /* return err */
}
@@ -1368,7 +1373,7 @@
struct saa7146_dmaqueue *q = &vv->video_q;
spin_lock(&dev->slock);
- DEB_CAP(("called.\n"));
+ DEB_CAP("called\n");
/* only finish the buffer if we have one... */
if( NULL != q->curr ) {
@@ -1386,15 +1391,15 @@
struct saa7146_vv *vv = dev->vv_data;
ssize_t ret = 0;
- DEB_EE(("called.\n"));
+ DEB_EE("called\n");
if ((vv->video_status & STATUS_CAPTURE) != 0) {
/* fixme: should we allow read() captures while streaming capture? */
if (vv->video_fh == fh) {
- DEB_S(("already capturing.\n"));
+ DEB_S("already capturing\n");
return -EBUSY;
}
- DEB_S(("already capturing in another open.\n"));
+ DEB_S("already capturing in another open\n");
return -EBUSY;
}
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
index 20d24fc..196c12a 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -28,5 +28,5 @@
obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o
obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/common/tuners/mt20xx.c b/drivers/media/common/tuners/mt20xx.c
index d0e70e1..0e74e97 100644
--- a/drivers/media/common/tuners/mt20xx.c
+++ b/drivers/media/common/tuners/mt20xx.c
@@ -430,11 +430,10 @@
{
struct microtune_priv *priv = fe->tuner_priv;
unsigned char buf[2];
- int ret;
buf[0] = 6;
buf[1] = antenna ? 0x11 : 0x10;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2);
+ tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
tuner_dbg("mt2050: enabled antenna connector %d\n", antenna);
}
@@ -574,21 +573,20 @@
{
struct microtune_priv *priv = fe->tuner_priv;
unsigned char buf[2];
- int ret;
- buf[0]=6;
- buf[1]=0x10;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2); // power
+ buf[0] = 6;
+ buf[1] = 0x10;
+ tuner_i2c_xfer_send(&priv->i2c_props, buf, 2); /* power */
- buf[0]=0x0f;
- buf[1]=0x0f;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,2); // m1lo
+ buf[0] = 0x0f;
+ buf[1] = 0x0f;
+ tuner_i2c_xfer_send(&priv->i2c_props, buf, 2); /* m1lo */
- buf[0]=0x0d;
- ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,1);
- tuner_i2c_xfer_recv(&priv->i2c_props,buf,1);
+ buf[0] = 0x0d;
+ tuner_i2c_xfer_send(&priv->i2c_props, buf, 1);
+ tuner_i2c_xfer_recv(&priv->i2c_props, buf, 1);
- tuner_dbg("mt2050: sro is %x\n",buf[0]);
+ tuner_dbg("mt2050: sro is %x\n", buf[0]);
memcpy(&fe->ops.tuner_ops, &mt2050_tuner_ops, sizeof(struct dvb_tuner_ops));
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 56fe75c9..54be9e6 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -309,7 +309,6 @@
static u16 MXL_SetGPIO(struct dvb_frontend *fe, u8 GPIO_Num, u8 GPIO_Val);
static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum,
u8 *RegVal, int *count);
-static u32 MXL_GetXtalInt(u32 Xtal_Freq);
static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq);
static void MXL_SynthIFLO_Calc(struct dvb_frontend *fe);
static void MXL_SynthRFTGLO_Calc(struct dvb_frontend *fe);
@@ -2307,14 +2306,6 @@
return status ;
}
-static u32 MXL_GetXtalInt(u32 Xtal_Freq)
-{
- if ((Xtal_Freq % 1000000) == 0)
- return (Xtal_Freq / 10000);
- else
- return (((Xtal_Freq / 1000000) + 1)*100);
-}
-
static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq)
{
struct mxl5005s_state *state = fe->tuner_priv;
@@ -2324,13 +2315,10 @@
u32 Kdbl_RF = 2;
u32 tg_divval;
u32 tg_lo;
- u32 Xtal_Int;
u32 Fref_TG;
u32 Fvco;
- Xtal_Int = MXL_GetXtalInt(state->Fxtal);
-
state->RF_IN = RF_Freq;
MXL_SynthRFTGLO_Calc(fe);
@@ -2779,6 +2767,16 @@
tg_lo = (((Fmax/10 - Fvco)/100)*32) / ((Fmax-Fmin)/1000)+8;
/* below equation is same as above but much harder to debug.
+ *
+ * static u32 MXL_GetXtalInt(u32 Xtal_Freq)
+ * {
+ * if ((Xtal_Freq % 1000000) == 0)
+ * return (Xtal_Freq / 10000);
+ * else
+ * return (((Xtal_Freq / 1000000) + 1)*100);
+ * }
+ *
+ * u32 Xtal_Int = MXL_GetXtalInt(state->Fxtal);
* tg_lo = ( ((Fmax/10000 * Xtal_Int)/100) -
* ((state->TG_LO/10000)*divider_val *
* (state->Fxtal/10000)/100) )*32/((Fmax-Fmin)/10000 *
diff --git a/drivers/media/common/tuners/tda18212.c b/drivers/media/common/tuners/tda18212.c
index 1f1db20..e29cc2bc1 100644
--- a/drivers/media/common/tuners/tda18212.c
+++ b/drivers/media/common/tuners/tda18212.c
@@ -18,7 +18,20 @@
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include "tda18212_priv.h"
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "tda18212.h"
+
+struct tda18212_priv {
+ struct tda18212_config *cfg;
+ struct i2c_adapter *i2c;
+};
+
+#define dbg(fmt, arg...) \
+do { \
+ if (debug) \
+ pr_info("%s: " fmt, __func__, ##arg); \
+} while (0)
static int debug;
module_param(debug, int, 0644);
@@ -46,7 +59,8 @@
if (ret == 1) {
ret = 0;
} else {
- warn("i2c wr failed ret:%d reg:%02x len:%d", ret, reg, len);
+ pr_warn("i2c wr failed ret:%d reg:%02x len:%d\n",
+ ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
@@ -77,7 +91,8 @@
memcpy(val, buf, len);
ret = 0;
} else {
- warn("i2c rd failed ret:%d reg:%02x len:%d", ret, reg, len);
+ pr_warn("i2c rd failed ret:%d reg:%02x len:%d\n",
+ ret, reg, len);
ret = -EREMOTEIO;
}
@@ -129,8 +144,8 @@
{ 0x92, 0x53, 0x03 }, /* DVB-C */
};
- dbg("%s: delsys=%d RF=%d BW=%d", __func__,
- c->delivery_system, c->frequency, c->bandwidth_hz);
+ dbg("delsys=%d RF=%d BW=%d\n",
+ c->delivery_system, c->frequency, c->bandwidth_hz);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
@@ -196,7 +211,7 @@
return ret;
error:
- dbg("%s: failed:%d", __func__, ret);
+ dbg("failed:%d\n", ret);
goto exit;
}
@@ -245,13 +260,13 @@
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
- dbg("%s: ret:%d chip ID:%02x", __func__, ret, val);
+ dbg("ret:%d chip ID:%02x\n", ret, val);
if (ret || val != 0xc7) {
kfree(priv);
return NULL;
}
- info("NXP TDA18212HN successfully identified.");
+ pr_info("NXP TDA18212HN successfully identified\n");
memcpy(&fe->ops.tuner_ops, &tda18212_tuner_ops,
sizeof(struct dvb_tuner_ops));
diff --git a/drivers/media/common/tuners/tda18212_priv.h b/drivers/media/common/tuners/tda18212_priv.h
deleted file mode 100644
index 9adff93..0000000
--- a/drivers/media/common/tuners/tda18212_priv.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * NXP TDA18212HN silicon tuner driver
- *
- * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef TDA18212_PRIV_H
-#define TDA18212_PRIV_H
-
-#include "tda18212.h"
-
-#define LOG_PREFIX "tda18212"
-
-#undef dbg
-#define dbg(f, arg...) \
- if (debug) \
- printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
-#undef err
-#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
-#undef info
-#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
-#undef warn
-#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
-
-struct tda18212_priv {
- struct tda18212_config *cfg;
- struct i2c_adapter *i2c;
-};
-
-#endif
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index aae40e5..39c64578 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -676,10 +676,28 @@
return ret;
}
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
+int _tda_printk(struct tda18271_priv *state, const char *level,
+ const char *func, const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+ int rtn;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ if (state)
+ rtn = printk("%s%s: [%d-%04x|%c] %pV",
+ level, func, i2c_adapter_id(state->i2c_props.adap),
+ state->i2c_props.addr,
+ (state->role == TDA18271_MASTER) ? 'M' : 'S',
+ &vaf);
+ else
+ rtn = printk("%s%s: %pV", level, func, &vaf);
+
+ va_end(args);
+
+ return rtn;
+}
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 57022e8..63cc400 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -1230,7 +1230,7 @@
return 0;
}
-static struct dvb_tuner_ops tda18271_tuner_ops = {
+static const struct dvb_tuner_ops tda18271_tuner_ops = {
.info = {
.name = "NXP TDA18271HD",
.frequency_min = 45000000,
diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h
index 9589ab0..94340f4 100644
--- a/drivers/media/common/tuners/tda18271-priv.h
+++ b/drivers/media/common/tuners/tda18271-priv.h
@@ -136,29 +136,26 @@
#define DBG_ADV 8
#define DBG_CAL 16
-#define tda_printk(st, kern, fmt, arg...) do {\
- if (st) { \
- struct tda18271_priv *state = st; \
- printk(kern "%s: [%d-%04x|%s] " fmt, __func__, \
- i2c_adapter_id(state->i2c_props.adap), \
- state->i2c_props.addr, \
- (state->role == TDA18271_MASTER) \
- ? "M" : "S", ##arg); \
- } else \
- printk(kern "%s: " fmt, __func__, ##arg); \
+__attribute__((format(printf, 4, 5)))
+int _tda_printk(struct tda18271_priv *state, const char *level,
+ const char *func, const char *fmt, ...);
+
+#define tda_printk(st, lvl, fmt, arg...) \
+ _tda_printk(st, lvl, __func__, fmt, ##arg)
+
+#define tda_dprintk(st, lvl, fmt, arg...) \
+do { \
+ if (tda18271_debug & lvl) \
+ tda_printk(st, KERN_DEBUG, fmt, ##arg); \
} while (0)
-#define tda_dprintk(st, lvl, fmt, arg...) do {\
- if (tda18271_debug & lvl) \
- tda_printk(st, KERN_DEBUG, fmt, ##arg); } while (0)
-
-#define tda_info(fmt, arg...) printk(KERN_INFO fmt, ##arg)
-#define tda_warn(fmt, arg...) tda_printk(priv, KERN_WARNING, fmt, ##arg)
-#define tda_err(fmt, arg...) tda_printk(priv, KERN_ERR, fmt, ##arg)
-#define tda_dbg(fmt, arg...) tda_dprintk(priv, DBG_INFO, fmt, ##arg)
-#define tda_map(fmt, arg...) tda_dprintk(priv, DBG_MAP, fmt, ##arg)
-#define tda_reg(fmt, arg...) tda_dprintk(priv, DBG_REG, fmt, ##arg)
-#define tda_cal(fmt, arg...) tda_dprintk(priv, DBG_CAL, fmt, ##arg)
+#define tda_info(fmt, arg...) pr_info(fmt, ##arg)
+#define tda_warn(fmt, arg...) tda_printk(priv, KERN_WARNING, fmt, ##arg)
+#define tda_err(fmt, arg...) tda_printk(priv, KERN_ERR, fmt, ##arg)
+#define tda_dbg(fmt, arg...) tda_dprintk(priv, DBG_INFO, fmt, ##arg)
+#define tda_map(fmt, arg...) tda_dprintk(priv, DBG_MAP, fmt, ##arg)
+#define tda_reg(fmt, arg...) tda_dprintk(priv, DBG_REG, fmt, ##arg)
+#define tda_cal(fmt, arg...) tda_dprintk(priv, DBG_CAL, fmt, ##arg)
#define tda_fail(ret) \
({ \
diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c
index b21b6ea..e0d5b43 100644
--- a/drivers/media/common/tuners/tda827x.c
+++ b/drivers/media/common/tuners/tda827x.c
@@ -176,7 +176,7 @@
if_freq = 5000000;
break;
}
- tuner_freq = params->frequency + if_freq;
+ tuner_freq = params->frequency;
i = 0;
while (tda827x_table[i].lomax < tuner_freq) {
@@ -185,6 +185,8 @@
i++;
}
+ tuner_freq += if_freq;
+
N = ((tuner_freq + 125000) / 250000) << (tda827x_table[i].spd + 2);
buf[0] = 0;
buf[1] = (N>>8) | 0x40;
@@ -540,7 +542,7 @@
if_freq = 5000000;
break;
}
- tuner_freq = params->frequency + if_freq;
+ tuner_freq = params->frequency;
if (fe->ops.info.type == FE_QAM) {
dprintk("%s select tda827xa_dvbc\n", __func__);
@@ -554,6 +556,8 @@
i++;
}
+ tuner_freq += if_freq;
+
N = ((tuner_freq + 31250) / 62500) << frequency_map[i].spd;
buf[0] = 0; // subaddress
buf[1] = N >> 8;
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index 16fba6b..3acbaa0 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -614,6 +614,13 @@
p += len;
size -= len;
}
+
+ /* silently fail if the frontend doesn't support I2C flush */
+ rc = do_tuner_callback(fe, XC2028_I2C_FLUSH, 0);
+ if ((rc < 0) && (rc != -EINVAL)) {
+ tuner_err("error executing flush: %d\n", rc);
+ return rc;
+ }
}
return 0;
}
@@ -933,11 +940,16 @@
* that xc2028 will be in a safe state.
* Maybe this might also be needed for DTV.
*/
- if (new_type == V4L2_TUNER_ANALOG_TV) {
+ switch (new_type) {
+ case V4L2_TUNER_ANALOG_TV:
rc = send_seq(priv, {0x00, 0x00});
- /* Analog modes require offset = 0 */
- } else {
+ /* Analog mode requires offset = 0 */
+ break;
+ case V4L2_TUNER_RADIO:
+ /* Radio mode requires offset = 0 */
+ break;
+ case V4L2_TUNER_DIGITAL_TV:
/*
* Digital modes require an offset to adjust to the
* proper frequency. The offset depends on what
diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h
index 9778c96..9ebfb2d 100644
--- a/drivers/media/common/tuners/tuner-xc2028.h
+++ b/drivers/media/common/tuners/tuner-xc2028.h
@@ -54,6 +54,7 @@
/* xc2028 commands for callback */
#define XC2028_TUNER_RESET 0
#define XC2028_RESET_CLK 1
+#define XC2028_I2C_FLUSH 2
#if defined(CONFIG_MEDIA_TUNER_XC2028) || (defined(CONFIG_MEDIA_TUNER_XC2028_MODULE) && defined(MODULE))
extern struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile
index b97cf72..3d04a8d 100644
--- a/drivers/media/dvb/b2c2/Makefile
+++ b/drivers/media/dvb/b2c2/Makefile
@@ -12,5 +12,5 @@
b2c2-flexcop-usb-objs = flexcop-usb.o
obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
-EXTRA_CFLAGS += -Idrivers/media/common/tuners/
+ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
+ccflags-y += -Idrivers/media/common/tuners/
diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile
index d98f1d4..0713b3a 100644
--- a/drivers/media/dvb/bt8xx/Makefile
+++ b/drivers/media/dvb/bt8xx/Makefile
@@ -1,6 +1,6 @@
obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
-EXTRA_CFLAGS += -Idrivers/media/video/bt8xx
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video/bt8xx
+ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/dvb/ddbridge/Makefile
index de4fe19..cf7214e 100644
--- a/drivers/media/dvb/ddbridge/Makefile
+++ b/drivers/media/dvb/ddbridge/Makefile
@@ -6,9 +6,9 @@
obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends/
-EXTRA_CFLAGS += -Idrivers/media/common/tuners/
+ccflags-y += -Idrivers/media/dvb/dvb-core/
+ccflags-y += -Idrivers/media/dvb/frontends/
+ccflags-y += -Idrivers/media/common/tuners/
# For the staging CI driver cxd2099
-EXTRA_CFLAGS += -Idrivers/staging/cxd2099/
+ccflags-y += -Idrivers/staging/cxd2099/
diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c
index 573d540..ba9a643 100644
--- a/drivers/media/dvb/ddbridge/ddbridge-core.c
+++ b/drivers/media/dvb/ddbridge/ddbridge-core.c
@@ -507,15 +507,14 @@
return 0;
}
-static size_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count)
+static ssize_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count)
{
struct ddb *dev = input->port->dev;
u32 left = count;
- u32 idx, off, free, stat = input->stat;
+ u32 idx, free, stat = input->stat;
int ret;
idx = (stat >> 11) & 0x1f;
- off = (stat & 0x7ff) << 7;
while (left) {
if (input->cbuf == idx)
@@ -525,6 +524,8 @@
free = left;
ret = copy_to_user(buf, input->vbuf[input->cbuf] +
input->coff, free);
+ if (ret)
+ return -EFAULT;
input->coff += free;
if (input->coff == input->dma_buf_size) {
input->coff = 0;
@@ -939,6 +940,8 @@
break;
}
read = ddb_input_read(input, buf, left);
+ if (read < 0)
+ return read;
left -= read;
buf += read;
}
@@ -1438,7 +1441,7 @@
{
struct ddb *dev = file->private_data;
void *parg = (void *)arg;
- int res = -EFAULT;
+ int res;
switch (cmd) {
case IOCTL_DDB_FLASHIO:
@@ -1447,29 +1450,29 @@
u8 *rbuf, *wbuf;
if (copy_from_user(&fio, parg, sizeof(fio)))
- break;
- if (fio.write_len + fio.read_len > 1028) {
- printk(KERN_ERR "IOBUF too small\n");
- return -ENOMEM;
- }
+ return -EFAULT;
+
+ if (fio.write_len > 1028 || fio.read_len > 1028)
+ return -EINVAL;
+ if (fio.write_len + fio.read_len > 1028)
+ return -EINVAL;
+
wbuf = &dev->iobuf[0];
- if (!wbuf)
- return -ENOMEM;
rbuf = wbuf + fio.write_len;
- if (copy_from_user(wbuf, fio.write_buf, fio.write_len)) {
- vfree(wbuf);
- break;
- }
- res = flashio(dev, wbuf, fio.write_len,
- rbuf, fio.read_len);
+
+ if (copy_from_user(wbuf, fio.write_buf, fio.write_len))
+ return -EFAULT;
+ res = flashio(dev, wbuf, fio.write_len, rbuf, fio.read_len);
+ if (res)
+ return res;
if (copy_to_user(fio.read_buf, rbuf, fio.read_len))
- res = -EFAULT;
+ return -EFAULT;
break;
}
default:
- break;
+ return -ENOTTY;
}
- return res;
+ return 0;
}
static const struct file_operations ddb_fops = {
diff --git a/drivers/media/dvb/dm1105/Makefile b/drivers/media/dvb/dm1105/Makefile
index 8ac28b0..95a008b 100644
--- a/drivers/media/dvb/dm1105/Makefile
+++ b/drivers/media/dvb/dm1105/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_DVB_DM1105) += dm1105.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index efe9c30..2c0acdb 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -149,30 +149,25 @@
dprintk ("%s\n", __func__);
- if (mutex_lock_interruptible (&events->mtx))
- return;
+ if ((status & FE_HAS_LOCK) && fe->ops.get_frontend)
+ fe->ops.get_frontend(fe, &fepriv->parameters_out);
+
+ mutex_lock(&events->mtx);
wp = (events->eventw + 1) % MAX_EVENT;
-
if (wp == events->eventr) {
events->overflow = 1;
events->eventr = (events->eventr + 1) % MAX_EVENT;
}
e = &events->events[events->eventw];
-
- if (status & FE_HAS_LOCK)
- if (fe->ops.get_frontend)
- fe->ops.get_frontend(fe, &fepriv->parameters_out);
-
+ e->status = status;
e->parameters = fepriv->parameters_out;
events->eventw = wp;
mutex_unlock(&events->mtx);
- e->status = status;
-
wake_up_interruptible (&events->wait_queue);
}
@@ -207,19 +202,24 @@
return ret;
}
- if (mutex_lock_interruptible (&events->mtx))
- return -ERESTARTSYS;
-
- memcpy (event, &events->events[events->eventr],
- sizeof(struct dvb_frontend_event));
-
+ mutex_lock(&events->mtx);
+ *event = events->events[events->eventr];
events->eventr = (events->eventr + 1) % MAX_EVENT;
-
mutex_unlock(&events->mtx);
return 0;
}
+static void dvb_frontend_clear_events(struct dvb_frontend *fe)
+{
+ struct dvb_frontend_private *fepriv = fe->frontend_priv;
+ struct dvb_fe_events *events = &fepriv->events;
+
+ mutex_lock(&events->mtx);
+ events->eventr = events->eventw;
+ mutex_unlock(&events->mtx);
+}
+
static void dvb_frontend_init(struct dvb_frontend *fe)
{
dprintk ("DVB: initialising adapter %i frontend %i (%s)...\n",
@@ -537,7 +537,6 @@
{
struct dvb_frontend *fe = data;
struct dvb_frontend_private *fepriv = fe->frontend_priv;
- unsigned long timeout;
fe_status_t s;
enum dvbfe_algo algo;
@@ -558,7 +557,7 @@
while (1) {
up(&fepriv->sem); /* is locked when we enter the thread... */
restart:
- timeout = wait_event_interruptible_timeout(fepriv->wait_queue,
+ wait_event_interruptible_timeout(fepriv->wait_queue,
dvb_frontend_should_wakeup(fe) || kthread_should_stop()
|| freezing(current),
fepriv->delay);
@@ -577,12 +576,10 @@
if (fepriv->reinitialise) {
dvb_frontend_init(fe);
- if (fepriv->tone != -1) {
+ if (fe->ops.set_tone && fepriv->tone != -1)
fe->ops.set_tone(fe, fepriv->tone);
- }
- if (fepriv->voltage != -1) {
+ if (fe->ops.set_voltage && fepriv->voltage != -1)
fe->ops.set_voltage(fe, fepriv->voltage);
- }
fepriv->reinitialise = 0;
}
@@ -1019,6 +1016,29 @@
return 0;
}
+/* Initialize the cache with some default values derived from the
+ * legacy frontend_info structure.
+ */
+static void dtv_property_cache_init(struct dvb_frontend *fe,
+ struct dtv_frontend_properties *c)
+{
+ switch (fe->ops.info.type) {
+ case FE_QPSK:
+ c->modulation = QPSK; /* implied for DVB-S in legacy API */
+ c->rolloff = ROLLOFF_35;/* implied for DVB-S */
+ c->delivery_system = SYS_DVBS;
+ break;
+ case FE_QAM:
+ c->delivery_system = SYS_DVBC_ANNEX_AC;
+ break;
+ case FE_OFDM:
+ c->delivery_system = SYS_DVBT;
+ break;
+ case FE_ATSC:
+ break;
+ }
+}
+
/* Synchronise the legacy tuning parameters into the cache, so that demodulator
* drivers can use a single set_frontend tuning function, regardless of whether
* it's being used for the legacy or new API, reducing code and complexity.
@@ -1032,17 +1052,13 @@
switch (fe->ops.info.type) {
case FE_QPSK:
- c->modulation = QPSK; /* implied for DVB-S in legacy API */
- c->rolloff = ROLLOFF_35;/* implied for DVB-S */
c->symbol_rate = p->u.qpsk.symbol_rate;
c->fec_inner = p->u.qpsk.fec_inner;
- c->delivery_system = SYS_DVBS;
break;
case FE_QAM:
c->symbol_rate = p->u.qam.symbol_rate;
c->fec_inner = p->u.qam.fec_inner;
c->modulation = p->u.qam.modulation;
- c->delivery_system = SYS_DVBC_ANNEX_AC;
break;
case FE_OFDM:
if (p->u.ofdm.bandwidth == BANDWIDTH_6_MHZ)
@@ -1060,7 +1076,6 @@
c->transmission_mode = p->u.ofdm.transmission_mode;
c->guard_interval = p->u.ofdm.guard_interval;
c->hierarchy = p->u.ofdm.hierarchy_information;
- c->delivery_system = SYS_DVBT;
break;
case FE_ATSC:
c->modulation = p->u.vsb.modulation;
@@ -1132,16 +1147,13 @@
p->frequency = c->frequency;
p->inversion = c->inversion;
- switch(c->modulation) {
- case PSK_8:
- case APSK_16:
- case APSK_32:
- case QPSK:
+ if (c->delivery_system == SYS_DSS ||
+ c->delivery_system == SYS_DVBS ||
+ c->delivery_system == SYS_DVBS2 ||
+ c->delivery_system == SYS_ISDBS ||
+ c->delivery_system == SYS_TURBO) {
p->u.qpsk.symbol_rate = c->symbol_rate;
p->u.qpsk.fec_inner = c->fec_inner;
- break;
- default:
- break;
}
/* Fake out a generic DVB-T request so we pass validation in the ioctl */
@@ -1824,9 +1836,17 @@
memcpy (&fepriv->parameters_in, parg,
sizeof (struct dvb_frontend_parameters));
+ dtv_property_cache_init(fe, c);
dtv_property_cache_sync(fe, c, &fepriv->parameters_in);
}
+ /*
+ * Initialize output parameters to match the values given by
+ * the user. FE_SET_FRONTEND triggers an initial frontend event
+ * with status = 0, which copies output parameters to userspace.
+ */
+ fepriv->parameters_out = fepriv->parameters_in;
+
memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings));
memcpy(&fetunesettings.parameters, parg,
sizeof (struct dvb_frontend_parameters));
@@ -1884,8 +1904,9 @@
/* Request the search algorithm to search */
fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
- dvb_frontend_wakeup(fe);
+ dvb_frontend_clear_events(fe);
dvb_frontend_add_event(fe, 0);
+ dvb_frontend_wakeup(fe);
fepriv->status = 0;
err = 0;
break;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 5590eb6..67bbfa7 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -209,6 +209,7 @@
int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency);
int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
+ int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency);
#define TUNER_STATUS_LOCKED 1
#define TUNER_STATUS_STEREO 2
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 5d73dec..5825716 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -258,6 +258,19 @@
Say Y here to support the default remote control decoding for the
Afatech AF9005 based receiver.
+config DVB_USB_PCTV452E
+ tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600"
+ depends on DVB_USB
+ select TTPCI_EEPROM
+ select DVB_LNBP22 if !DVB_FE_CUSTOMISE
+ select DVB_STB0899 if !DVB_FE_CUSTOMISE
+ select DVB_STB6100 if !DVB_FE_CUSTOMISE
+ help
+ Support for external USB adapter designed by Pinnacle,
+ shipped under the brand name 'PCTV HDTV Pro USB'.
+ Also supports TT Connect S2-3600/3650 cards.
+ Say Y if you own such a device and want to use it.
+
config DVB_USB_DW2102
tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support"
depends on DVB_USB
@@ -374,3 +387,18 @@
select DVB_STV6110x if !DVB_FE_CUSTOMISE
help
Say Y here to support the Technisat USB2 DVB-S/S2 device
+
+config DVB_USB_IT913X
+ tristate "it913x driver"
+ depends on DVB_USB
+ select DVB_IT913X_FE
+ help
+ Say Y here to support the it913x device
+
+config DVB_USB_MXL111SF
+ tristate "MxL111SF DTV USB2.0 support"
+ depends on DVB_USB
+ select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
+ select VIDEO_TVEEPROM
+ help
+ Say Y here to support the MxL111SF USB2.0 DTV receiver.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 4bac13d..7d0710b 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -64,6 +64,9 @@
dvb-usb-anysee-objs = anysee.o
obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
+dvb-usb-pctv452e-objs = pctv452e.o
+obj-$(CONFIG_DVB_USB_PCTV452E) += dvb-usb-pctv452e.o
+
dvb-usb-dw2102-objs = dw2102.o
obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o
@@ -94,7 +97,15 @@
dvb-usb-technisat-usb2-objs = technisat-usb2.o
obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
+dvb-usb-it913x-objs := it913x.o
+obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
+
+dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
+
+ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
# due to tuner-xc3028
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/common/tuners
+EXTRA_CFLAGS += -Idrivers/media/dvb/ttpci
diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
index b95a95e..2aef3c8 100644
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ b/drivers/media/dvb/dvb-usb/a800.c
@@ -127,6 +127,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.streaming_ctrl = dibusb2_0_streaming_ctrl,
@@ -147,7 +149,7 @@
}
}
},
-
+ }},
.size_of_priv = sizeof(struct dibusb_state),
},
},
diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c
index 6ad94745..3263e97 100644
--- a/drivers/media/dvb/dvb-usb/af9005-fe.c
+++ b/drivers/media/dvb/dvb-usb/af9005-fe.c
@@ -63,11 +63,9 @@
u16 reglo, u8 pos, u8 len, u16 value)
{
int ret;
- u8 temp;
if ((ret = af9005_write_ofdm_register(d, reglo, (u8) (value & 0xff))))
return ret;
- temp = (u8) ((value & 0x0300) >> 8);
return af9005_write_register_bits(d, reghi, pos, len,
(u8) ((value & 0x300) >> 8));
}
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
index 0351c0e..bd51a76 100644
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ b/drivers/media/dvb/dvb-usb/af9005.c
@@ -815,7 +815,7 @@
debug_dump(buf, 8, printk);
}
}
- adap->fe = af9005_fe_attach(adap->dev);
+ adap->fe_adap[0].fe = af9005_fe_attach(adap->dev);
return 0;
}
@@ -999,6 +999,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps =
DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -1018,6 +1020,7 @@
}
}
},
+ }},
}
},
.power_ctrl = af9005_power_ctrl,
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index d7ad05f..c6c275b 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -744,29 +744,31 @@
};
static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
- { (USB_VID_TERRATEC << 16) + USB_PID_TERRATEC_CINERGY_T_STICK_RC,
+ { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_RC,
RC_MAP_TERRATEC_SLIM_2 },
- { (USB_VID_TERRATEC << 16) + USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
+ { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
RC_MAP_TERRATEC_SLIM },
- { (USB_VID_VISIONPLUS << 16) + USB_PID_AZUREWAVE_AD_TU700,
+ { (USB_VID_VISIONPLUS << 16) | USB_PID_AZUREWAVE_AD_TU700,
RC_MAP_AZUREWAVE_AD_TU700 },
- { (USB_VID_VISIONPLUS << 16) + USB_PID_TINYTWIN,
+ { (USB_VID_VISIONPLUS << 16) | USB_PID_TINYTWIN,
RC_MAP_AZUREWAVE_AD_TU700 },
- { (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGI_VOX_MINI_III,
+ { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGI_VOX_MINI_III,
RC_MAP_MSI_DIGIVOX_III },
- { (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGIVOX_DUO,
+ { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGIVOX_DUO,
RC_MAP_MSI_DIGIVOX_III },
- { (USB_VID_LEADTEK << 16) + USB_PID_WINFAST_DTV_DONGLE_GOLD,
+ { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV_DONGLE_GOLD,
RC_MAP_LEADTEK_Y04G0051 },
- { (USB_VID_AVERMEDIA << 16) + USB_PID_AVERMEDIA_VOLAR_X,
+ { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV2000DS,
+ RC_MAP_LEADTEK_Y04G0051 },
+ { (USB_VID_AVERMEDIA << 16) | USB_PID_AVERMEDIA_VOLAR_X,
RC_MAP_AVERMEDIA_M135A },
- { (USB_VID_AFATECH << 16) + USB_PID_TREKSTOR_DVBT,
+ { (USB_VID_AFATECH << 16) | USB_PID_TREKSTOR_DVBT,
RC_MAP_TREKSTOR },
- { (USB_VID_KWORLD_2 << 16) + USB_PID_TINYTWIN_2,
+ { (USB_VID_KWORLD_2 << 16) | USB_PID_TINYTWIN_2,
RC_MAP_DIGITALNOW_TINYTWIN },
- { (USB_VID_GTEK << 16) + USB_PID_TINYTWIN_3,
+ { (USB_VID_GTEK << 16) | USB_PID_TINYTWIN_3,
RC_MAP_DIGITALNOW_TINYTWIN },
- { (USB_VID_KWORLD_2 << 16) + USB_PID_SVEON_STV22,
+ { (USB_VID_KWORLD_2 << 16) | USB_PID_SVEON_STV22,
RC_MAP_MSI_DIGIVOX_III },
{ }
};
@@ -859,13 +861,13 @@
for (i = 0; i < af9015_properties_count; i++) {
/* USB1.1 set smaller buffersize and disable 2nd adapter */
if (udev->speed == USB_SPEED_FULL) {
- af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+ af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
= TS_USB11_FRAME_SIZE;
/* disable 2nd adapter because we don't have
PID-filters */
af9015_config.dual_mode = 0;
} else {
- af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+ af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
= TS_USB20_FRAME_SIZE;
}
}
@@ -1111,10 +1113,10 @@
}
/* attach demodulator */
- adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id],
+ adap->fe_adap[0].fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id],
&adap->dev->i2c_adap);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static struct mt2060_config af9015_mt2060_config = {
@@ -1188,49 +1190,49 @@
switch (af9015_af9013_config[adap->id].tuner) {
case AF9013_TUNER_MT2060:
case AF9013_TUNER_MT2060_2:
- ret = dvb_attach(mt2060_attach, adap->fe, &adap->dev->i2c_adap,
+ ret = dvb_attach(mt2060_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&af9015_mt2060_config,
af9015_config.mt2060_if1[adap->id])
== NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_QT1010:
case AF9013_TUNER_QT1010A:
- ret = dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
+ ret = dvb_attach(qt1010_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&af9015_qt1010_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_TDA18271:
- ret = dvb_attach(tda18271_attach, adap->fe, 0xc0,
+ ret = dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0xc0,
&adap->dev->i2c_adap,
&af9015_tda18271_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_TDA18218:
- ret = dvb_attach(tda18218_attach, adap->fe,
+ ret = dvb_attach(tda18218_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap,
&af9015_tda18218_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5003D:
- ret = dvb_attach(mxl5005s_attach, adap->fe,
+ ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap,
&af9015_mxl5003_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5005D:
case AF9013_TUNER_MXL5005R:
- ret = dvb_attach(mxl5005s_attach, adap->fe,
+ ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap,
&af9015_mxl5005_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_ENV77H11D5:
- ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+ ret = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0xc0,
&adap->dev->i2c_adap,
DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MC44S803:
- ret = dvb_attach(mc44s803_attach, adap->fe,
+ ret = dvb_attach(mc44s803_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap,
&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5007T:
- ret = dvb_attach(mxl5007t_attach, adap->fe,
+ ret = dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap,
0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
break;
@@ -1304,6 +1306,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -1319,8 +1323,11 @@
.count = 6,
.endpoint = 0x84,
},
+ }},
},
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach =
af9015_af9013_frontend_attach,
.tuner_attach = af9015_tuner_attach,
@@ -1335,6 +1342,7 @@
}
}
},
+ }},
}
},
@@ -1432,6 +1440,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -1447,8 +1457,11 @@
.count = 6,
.endpoint = 0x84,
},
+ }},
},
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach =
af9015_af9013_frontend_attach,
.tuner_attach = af9015_tuner_attach,
@@ -1463,6 +1476,7 @@
}
}
},
+ }},
}
},
@@ -1549,6 +1563,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -1564,8 +1580,11 @@
.count = 6,
.endpoint = 0x84,
},
+ }},
},
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach =
af9015_af9013_frontend_attach,
.tuner_attach = af9015_tuner_attach,
@@ -1580,6 +1599,7 @@
}
}
},
+ }},
}
},
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 2cbf19a..5f2278b 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -446,6 +446,114 @@
* IOE[5] STV0903 1=enabled
*/
+static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct anysee_state *state = adap->dev->priv;
+ int ret;
+
+ deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+ /* no frontend sleep control */
+ if (onoff == 0)
+ return 0;
+
+ switch (state->hw) {
+ case ANYSEE_HW_507FA: /* 15 */
+ /* E30 Combo Plus */
+ /* E30 C Plus */
+
+ if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
+ /* disable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ }
+
+ break;
+ case ANYSEE_HW_508TC: /* 18 */
+ case ANYSEE_HW_508PTC: /* 21 */
+ /* E7 TC */
+ /* E7 PTC */
+
+ if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
+ /* disable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
+ 0x40);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable IF route on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
+ 0x40);
+ if (ret)
+ goto error;
+
+ /* enable IF route on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ }
+
+ break;
+ default:
+ ret = 0;
+ }
+
+error:
+ return ret;
+}
+
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
@@ -466,41 +574,54 @@
}
};
- /* Check which hardware we have.
- * We must do this call two times to get reliable values (hw bug).
- */
- ret = anysee_get_hw_info(adap->dev, hw_info);
- if (ret)
- goto error;
+ /* detect hardware only once */
+ if (adap->fe_adap[0].fe == NULL) {
+ /* Check which hardware we have.
+ * We must do this call two times to get reliable values (hw bug).
+ */
+ ret = anysee_get_hw_info(adap->dev, hw_info);
+ if (ret)
+ goto error;
- ret = anysee_get_hw_info(adap->dev, hw_info);
- if (ret)
- goto error;
+ ret = anysee_get_hw_info(adap->dev, hw_info);
+ if (ret)
+ goto error;
- /* Meaning of these info bytes are guessed. */
- info("firmware version:%d.%d hardware id:%d",
- hw_info[1], hw_info[2], hw_info[0]);
+ /* Meaning of these info bytes are guessed. */
+ info("firmware version:%d.%d hardware id:%d",
+ hw_info[1], hw_info[2], hw_info[0]);
- state->hw = hw_info[0];
+ state->hw = hw_info[0];
+ }
+
+ /* set current frondend ID for devices having two frondends */
+ if (adap->fe_adap[0].fe)
+ state->fe_id++;
switch (state->hw) {
case ANYSEE_HW_507T: /* 2 */
/* E30 */
- /* attach demod */
- adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
- &adap->dev->i2c_adap);
- if (adap->fe)
+ if (state->fe_id)
break;
/* attach demod */
- adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+ adap->fe_adap[0].fe = dvb_attach(mt352_attach, &anysee_mt352_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe_adap[0].fe)
+ break;
+
+ /* attach demod */
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
&adap->dev->i2c_adap);
break;
case ANYSEE_HW_507CD: /* 6 */
/* E30 Plus */
+ if (state->fe_id)
+ break;
+
/* enable DVB-T demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
@@ -512,33 +633,39 @@
goto error;
/* attach demod */
- adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
- &adap->dev->i2c_adap);
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
+ &anysee_zl10353_config, &adap->dev->i2c_adap);
break;
case ANYSEE_HW_507DC: /* 10 */
/* E30 C Plus */
+ if (state->fe_id)
+ break;
+
/* enable DVB-C demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
goto error;
/* attach demod */
- adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
- &adap->dev->i2c_adap, 0x48);
+ adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
+ &anysee_tda10023_config, &adap->dev->i2c_adap, 0x48);
break;
case ANYSEE_HW_507SI: /* 11 */
/* E30 S2 Plus */
+ if (state->fe_id)
+ break;
+
/* enable DVB-S/S2 demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
goto error;
/* attach demod */
- adap->fe = dvb_attach(cx24116_attach, &anysee_cx24116_config,
+ adap->fe_adap[0].fe = dvb_attach(cx24116_attach, &anysee_cx24116_config,
&adap->dev->i2c_adap);
break;
@@ -564,32 +691,7 @@
if (ret)
goto error;
- if (dvb_usb_anysee_delsys) {
- /* disable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
- 0x20);
- if (ret)
- goto error;
-
- /* enable DVB-T demod on IOD[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
- 0x01);
- if (ret)
- goto error;
-
- /* attach demod */
- if (tmp == 0xc7) {
- /* TDA18212 config */
- adap->fe = dvb_attach(zl10353_attach,
- &anysee_zl10353_tda18212_config2,
- &adap->dev->i2c_adap);
- } else {
- /* PLL config */
- adap->fe = dvb_attach(zl10353_attach,
- &anysee_zl10353_config,
- &adap->dev->i2c_adap);
- }
- } else {
+ if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
/* disable DVB-T demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
0x01);
@@ -605,15 +707,44 @@
/* attach demod */
if (tmp == 0xc7) {
/* TDA18212 config */
- adap->fe = dvb_attach(tda10023_attach,
+ adap->fe_adap[state->fe_id].fe = dvb_attach(
+ tda10023_attach,
&anysee_tda10023_tda18212_config,
&adap->dev->i2c_adap, 0x48);
} else {
/* PLL config */
- adap->fe = dvb_attach(tda10023_attach,
+ adap->fe_adap[state->fe_id].fe = dvb_attach(
+ tda10023_attach,
&anysee_tda10023_config,
&adap->dev->i2c_adap, 0x48);
}
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ if (tmp == 0xc7) {
+ /* TDA18212 config */
+ adap->fe_adap[state->fe_id].fe = dvb_attach(
+ zl10353_attach,
+ &anysee_zl10353_tda18212_config2,
+ &adap->dev->i2c_adap);
+ } else {
+ /* PLL config */
+ adap->fe_adap[state->fe_id].fe = dvb_attach(
+ zl10353_attach,
+ &anysee_zl10353_config,
+ &adap->dev->i2c_adap);
+ }
}
break;
@@ -627,30 +758,7 @@
if (ret)
goto error;
- if (dvb_usb_anysee_delsys) {
- /* disable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
- 0x20);
- if (ret)
- goto error;
-
- /* enable DVB-T demod on IOD[6] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
- 0x40);
- if (ret)
- goto error;
-
- /* enable IF route on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
- 0x01);
- if (ret)
- goto error;
-
- /* attach demod */
- adap->fe = dvb_attach(zl10353_attach,
- &anysee_zl10353_tda18212_config,
- &adap->dev->i2c_adap);
- } else {
+ if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
/* disable DVB-T demod on IOD[6] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
0x40);
@@ -663,16 +771,27 @@
if (ret)
goto error;
- /* enable IF route on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
- 0x01);
+ /* attach demod */
+ adap->fe_adap[state->fe_id].fe = dvb_attach(tda10023_attach,
+ &anysee_tda10023_tda18212_config,
+ &adap->dev->i2c_adap, 0x48);
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
+ 0x40);
if (ret)
goto error;
/* attach demod */
- adap->fe = dvb_attach(tda10023_attach,
- &anysee_tda10023_tda18212_config,
- &adap->dev->i2c_adap, 0x48);
+ adap->fe_adap[state->fe_id].fe = dvb_attach(zl10353_attach,
+ &anysee_zl10353_tda18212_config,
+ &adap->dev->i2c_adap);
}
break;
@@ -681,6 +800,9 @@
/* E7 S2 */
/* E7 PS2 */
+ if (state->fe_id)
+ break;
+
/* enable transport stream on IOA[7] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
if (ret)
@@ -692,13 +814,13 @@
goto error;
/* attach demod */
- adap->fe = dvb_attach(stv0900_attach, &anysee_stv0900_config,
+ adap->fe_adap[0].fe = dvb_attach(stv0900_attach, &anysee_stv0900_config,
&adap->dev->i2c_adap, 0);
break;
}
- if (!adap->fe) {
+ if (!adap->fe_adap[0].fe) {
/* we have no frontend :-( */
ret = -ENODEV;
err("Unsupported Anysee version. " \
@@ -713,14 +835,14 @@
struct anysee_state *state = adap->dev->priv;
struct dvb_frontend *fe;
int ret;
- deb_info("%s:\n", __func__);
+ deb_info("%s: fe=%d\n", __func__, state->fe_id);
switch (state->hw) {
case ANYSEE_HW_507T: /* 2 */
/* E30 */
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
+ fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, (0xc2 >> 1),
NULL, DVB_PLL_THOMSON_DTT7579);
break;
@@ -728,7 +850,7 @@
/* E30 Plus */
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
+ fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, (0xc2 >> 1),
&adap->dev->i2c_adap, DVB_PLL_THOMSON_DTT7579);
break;
@@ -736,7 +858,7 @@
/* E30 C Plus */
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
+ fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, (0xc0 >> 1),
&adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
break;
@@ -744,28 +866,14 @@
/* E30 S2 Plus */
/* attach LNB controller */
- fe = dvb_attach(isl6423_attach, adap->fe, &adap->dev->i2c_adap,
- &anysee_isl6423_config);
+ fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
+ &adap->dev->i2c_adap, &anysee_isl6423_config);
break;
case ANYSEE_HW_507FA: /* 15 */
/* E30 Combo Plus */
/* E30 C Plus */
- if (dvb_usb_anysee_delsys) {
- /* enable DVB-T tuner on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
- 0x01);
- if (ret)
- goto error;
- } else {
- /* enable DVB-C tuner on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
- 0x01);
- if (ret)
- goto error;
- }
-
/* Try first attach TDA18212 silicon tuner on IOE[4], if that
* fails attach old simple PLL. */
@@ -775,8 +883,8 @@
goto error;
/* attach tuner */
- fe = dvb_attach(tda18212_attach, adap->fe, &adap->dev->i2c_adap,
- &anysee_tda18212_config);
+ fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
+ &adap->dev->i2c_adap, &anysee_tda18212_config);
if (fe)
break;
@@ -786,8 +894,9 @@
goto error;
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
- &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+ fe = dvb_attach(dvb_pll_attach, adap->fe_adap[state->fe_id].fe,
+ (0xc0 >> 1), &adap->dev->i2c_adap,
+ DVB_PLL_SAMSUNG_DTOS403IH102A);
break;
case ANYSEE_HW_508TC: /* 18 */
@@ -801,8 +910,8 @@
goto error;
/* attach tuner */
- fe = dvb_attach(tda18212_attach, adap->fe, &adap->dev->i2c_adap,
- &anysee_tda18212_config);
+ fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
+ &adap->dev->i2c_adap, &anysee_tda18212_config);
break;
case ANYSEE_HW_508S2: /* 19 */
@@ -811,12 +920,12 @@
/* E7 PS2 */
/* attach tuner */
- fe = dvb_attach(stv6110_attach, adap->fe,
+ fe = dvb_attach(stv6110_attach, adap->fe_adap[0].fe,
&anysee_stv6110_config, &adap->dev->i2c_adap);
if (fe) {
/* attach LNB controller */
- fe = dvb_attach(isl6423_attach, adap->fe,
+ fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, &anysee_isl6423_config);
}
@@ -918,6 +1027,9 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 2,
+ .frontend_ctrl = anysee_frontend_ctrl,
+ .fe = {{
.streaming_ctrl = anysee_streaming_ctrl,
.frontend_attach = anysee_frontend_attach,
.tuner_attach = anysee_tuner_attach,
@@ -931,6 +1043,21 @@
}
}
},
+ }, {
+ .streaming_ctrl = anysee_streaming_ctrl,
+ .frontend_attach = anysee_frontend_attach,
+ .tuner_attach = anysee_tuner_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = (16*512),
+ }
+ }
+ },
+ }},
}
},
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index ad6ccd1..57ee500 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -59,6 +59,7 @@
struct anysee_state {
u8 hw; /* PCB ID */
u8 seq;
+ u8 fe_id:1; /* frondend ID */
};
#define ANYSEE_HW_507T 2 /* E30 */
diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c
index 2351077..b779949 100644
--- a/drivers/media/dvb/dvb-usb/au6610.c
+++ b/drivers/media/dvb/dvb-usb/au6610.c
@@ -140,9 +140,9 @@
static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
{
- adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
&adap->dev->i2c_adap);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -ENODEV;
return 0;
@@ -155,7 +155,7 @@
static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
{
return dvb_attach(qt1010_attach,
- adap->fe, &adap->dev->i2c_adap,
+ adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&au6610_qt1010_config) == NULL ? -ENODEV : 0;
}
@@ -204,6 +204,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = au6610_zl10353_frontend_attach,
.tuner_attach = au6610_qt1010_tuner_attach,
@@ -219,6 +221,7 @@
}
}
},
+ }},
}
},
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index 57e2444..bf67b4d 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -40,7 +40,6 @@
{ STB0899_DISRX_ST0 , 0x04 },
{ STB0899_DISRX_ST1 , 0x00 },
{ STB0899_DISPARITY , 0x00 },
- { STB0899_DISFIFO , 0x00 },
{ STB0899_DISSTATUS , 0x20 },
{ STB0899_DISF22 , 0x99 },
{ STB0899_DISF22RX , 0xa8 },
@@ -782,7 +781,6 @@
{
u8 buf;
- int ret;
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct i2c_msg i2c_msg = {
@@ -800,17 +798,17 @@
switch (voltage) {
case SEC_VOLTAGE_13:
buf = 1;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_18:
buf = 2;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
case SEC_VOLTAGE_OFF:
buf = 0;
- ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
break;
default:
@@ -910,16 +908,16 @@
az6027_frontend_reset(adap);
deb_info("adap = %p, dev = %p\n", adap, adap->dev);
- adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
+ adap->fe_adap[0].fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
- if (adap->fe) {
+ if (adap->fe_adap[0].fe) {
deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address);
- if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
+ if (stb6100_attach(adap->fe_adap[0].fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address);
- adap->fe->ops.set_voltage = az6027_set_voltage;
+ adap->fe_adap[0].fe->ops.set_voltage = az6027_set_voltage;
az6027_ci_init(adap);
} else {
- adap->fe = NULL;
+ adap->fe_adap[0].fe = NULL;
}
} else
warn("no front-end attached\n");
@@ -954,7 +952,6 @@
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i = 0, j = 0, len = 0;
- int ret;
u16 index;
u16 value;
int length;
@@ -990,7 +987,7 @@
index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
value = msg[i].addr + (msg[i].len << 8);
length = msg[i + 1].len + 6;
- ret = az6027_usb_in_op(d, req, value, index, data, length);
+ az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i + 1].len;
for (j = 0; j < len; j++)
msg[i + 1].buf[j] = data[j + 5];
@@ -1017,7 +1014,7 @@
index = 0x0;
value = msg[i].addr;
length = msg[i].len + 6;
- ret = az6027_usb_in_op(d, req, value, index, data, length);
+ az6027_usb_in_op(d, req, value, index, data, length);
len = msg[i].len;
for (j = 0; j < len; j++)
msg[i].buf[j] = data[j + 5];
@@ -1106,6 +1103,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = az6027_streaming_ctrl,
.frontend_attach = az6027_frontend_attach,
@@ -1120,6 +1119,7 @@
}
}
},
+ }},
}
},
/*
diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c
index 6d1a304..57afb5a 100644
--- a/drivers/media/dvb/dvb-usb/ce6230.c
+++ b/drivers/media/dvb/dvb-usb/ce6230.c
@@ -186,9 +186,9 @@
static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
{
deb_info("%s:\n", __func__);
- adap->fe = dvb_attach(zl10353_attach, &ce6230_zl10353_config,
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &ce6230_zl10353_config,
&adap->dev->i2c_adap);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -ENODEV;
return 0;
}
@@ -214,7 +214,7 @@
{
int ret;
deb_info("%s:\n", __func__);
- ret = dvb_attach(mxl5005s_attach, adap->fe, &adap->dev->i2c_adap,
+ ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&ce6230_mxl5003s_config) == NULL ? -ENODEV : 0;
return ret;
}
@@ -273,6 +273,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = ce6230_zl10353_frontend_attach,
.tuner_attach = ce6230_mxl5003s_tuner_attach,
.stream = {
@@ -285,6 +287,7 @@
}
}
},
+ }},
}
},
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
index 16f2ce2..f9d9050 100644
--- a/drivers/media/dvb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
@@ -69,7 +69,7 @@
char state[3];
int ret;
- adap->fe = cinergyt2_fe_attach(adap->dev);
+ adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
sizeof(state), 0);
@@ -198,6 +198,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cinergyt2_streaming_ctrl,
.frontend_attach = cinergyt2_frontend_attach,
@@ -212,6 +214,7 @@
}
}
},
+ }},
}
},
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index acb5fb2d..9f2a02c 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -347,7 +347,7 @@
static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d)
{
- struct usb_data_stream_properties *p = &d->props.adapter[0].stream;
+ struct usb_data_stream_properties *p = &d->props.adapter[0].fe[0].stream;
const int timeout = 100;
const int junk_len = p->u.bulk.buffersize;
u8 *junk;
@@ -725,7 +725,7 @@
/* Callbacks for DVB USB */
static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(simple_tuner_attach, adap->fe,
+ dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3);
return 0;
@@ -733,27 +733,27 @@
static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(dvb_pll_attach, adap->fe, 0x61,
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61,
NULL, DVB_PLL_THOMSON_DTT7579);
return 0;
}
static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(dvb_pll_attach, adap->fe, 0x61, NULL, DVB_PLL_LG_Z201);
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_LG_Z201);
return 0;
}
static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60,
NULL, DVB_PLL_THOMSON_DTT7579);
return 0;
}
static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(simple_tuner_attach, adap->fe,
+ dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF);
return 0;
}
@@ -795,9 +795,9 @@
};
/* FIXME: generalize & move to common area */
- adap->fe->callback = dvico_bluebird_xc2028_callback;
+ adap->fe_adap[0].fe->callback = dvico_bluebird_xc2028_callback;
- fe = dvb_attach(xc2028_attach, adap->fe, &cfg);
+ fe = dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &cfg);
if (fe == NULL || fe->ops.tuner_ops.set_config == NULL)
return -EIO;
@@ -808,7 +808,7 @@
static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(mxl5005s_attach, adap->fe,
+ dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, &aver_a868r_tuner);
return 0;
}
@@ -816,7 +816,7 @@
static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dvb_frontend *fe;
- fe = dvb_attach(mxl5005s_attach, adap->fe,
+ fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, &d680_dmb_tuner);
return (fe == NULL) ? -EIO : 0;
}
@@ -824,7 +824,7 @@
static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dvb_frontend *fe;
- fe = dvb_attach(max2165_attach, adap->fe,
+ fe = dvb_attach(max2165_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, &mygica_d689_max2165_cfg);
return (fe == NULL) ? -EIO : 0;
}
@@ -837,8 +837,9 @@
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1);
- if ((adap->fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config,
- &adap->dev->i2c_adap)) != NULL)
+ adap->fe_adap[0].fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL)
return 0;
return -EIO;
@@ -851,8 +852,10 @@
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
- if ((adap->fe = dvb_attach(lgdt330x_attach, &cxusb_lgdt3303_config,
- &adap->dev->i2c_adap)) != NULL)
+ adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach,
+ &cxusb_lgdt3303_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL)
return 0;
return -EIO;
@@ -860,9 +863,9 @@
static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
{
- adap->fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config,
+ adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config,
&adap->dev->i2c_adap);
- if (adap->fe != NULL)
+ if (adap->fe_adap[0].fe != NULL)
return 0;
return -EIO;
@@ -876,8 +879,9 @@
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
- if ((adap->fe = dvb_attach(mt352_attach, &cxusb_mt352_config,
- &adap->dev->i2c_adap)) != NULL)
+ adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_mt352_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL)
return 0;
return -EIO;
@@ -890,11 +894,15 @@
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
- if (((adap->fe = dvb_attach(mt352_attach, &cxusb_dee1601_config,
- &adap->dev->i2c_adap)) != NULL) ||
- ((adap->fe = dvb_attach(zl10353_attach,
- &cxusb_zl10353_dee1601_config,
- &adap->dev->i2c_adap)) != NULL))
+ adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_dee1601_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL)
+ return 0;
+
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
+ &cxusb_zl10353_dee1601_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL)
return 0;
return -EIO;
@@ -917,9 +925,11 @@
cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1);
cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
- if ((adap->fe = dvb_attach(zl10353_attach,
- &cxusb_zl10353_xc3028_config_no_i2c_gate,
- &adap->dev->i2c_adap)) == NULL)
+ adap->fe_adap[0].fe =
+ dvb_attach(zl10353_attach,
+ &cxusb_zl10353_xc3028_config_no_i2c_gate,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) == NULL)
return -EIO;
/* try to determine if there is no IR decoder on the I2C bus */
@@ -1031,9 +1041,9 @@
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&cxusb_dualdig4_rev2_config);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
return 0;
@@ -1084,15 +1094,15 @@
{
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c =
- dib7000p_get_i2c_master(adap->fe,
+ dib7000p_get_i2c_master(adap->fe_adap[0].fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
- if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
&dib7070p_dib0070_config) == NULL)
return -ENODEV;
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
return 0;
}
@@ -1108,14 +1118,16 @@
cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1);
cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
- if ((adap->fe = dvb_attach(zl10353_attach,
- &cxusb_zl10353_xc3028_config,
- &adap->dev->i2c_adap)) != NULL)
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
+ &cxusb_zl10353_xc3028_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL)
return 0;
- if ((adap->fe = dvb_attach(mt352_attach,
- &cxusb_mt352_xc3028_config,
- &adap->dev->i2c_adap)) != NULL)
+ adap->fe_adap[0].fe = dvb_attach(mt352_attach,
+ &cxusb_mt352_xc3028_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL)
return 0;
return -EIO;
@@ -1150,7 +1162,7 @@
usb_clear_halt(d->udev,
usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
usb_clear_halt(d->udev,
- usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
+ usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint));
/* Drain USB pipes to avoid hang after reboot */
for (n = 0; n < 5; n++) {
@@ -1172,8 +1184,8 @@
msleep(100);
/* Attach frontend */
- adap->fe = dvb_attach(lgs8gxx_attach, &d680_lgs8gl5_cfg, &d->i2c_adap);
- if (adap->fe == NULL)
+ adap->fe_adap[0].fe = dvb_attach(lgs8gxx_attach, &d680_lgs8gl5_cfg, &d->i2c_adap);
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
return 0;
@@ -1207,7 +1219,7 @@
usb_clear_halt(d->udev,
usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
usb_clear_halt(d->udev,
- usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
+ usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint));
/* Reset the tuner */
@@ -1223,9 +1235,9 @@
msleep(100);
/* Attach frontend */
- adap->fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg,
+ adap->fe_adap[0].fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg,
&d->i2c_adap);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
return 0;
@@ -1383,6 +1395,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_cx22702_frontend_attach,
.tuner_attach = cxusb_fmd1216me_tuner_attach,
@@ -1397,7 +1411,7 @@
}
}
},
-
+ }},
},
},
.power_ctrl = cxusb_power_ctrl,
@@ -1429,6 +1443,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_lgdt3303_frontend_attach,
.tuner_attach = cxusb_lgh064f_tuner_attach,
@@ -1444,6 +1460,7 @@
}
}
},
+ }},
},
},
@@ -1483,6 +1500,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_dee1601_frontend_attach,
.tuner_attach = cxusb_dee1601_tuner_attach,
@@ -1497,6 +1516,7 @@
}
}
},
+ }},
},
},
@@ -1544,6 +1564,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_mt352_frontend_attach,
.tuner_attach = cxusb_lgz201_tuner_attach,
@@ -1559,6 +1581,7 @@
}
}
},
+ }},
},
},
.power_ctrl = cxusb_bluebird_power_ctrl,
@@ -1596,6 +1619,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_mt352_frontend_attach,
.tuner_attach = cxusb_dtt7579_tuner_attach,
@@ -1611,6 +1636,7 @@
}
}
},
+ }},
},
},
.power_ctrl = cxusb_bluebird_power_ctrl,
@@ -1645,6 +1671,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_dualdig4_frontend_attach,
.tuner_attach = cxusb_dvico_xc3028_tuner_attach,
@@ -1659,6 +1687,7 @@
}
}
},
+ }},
},
},
@@ -1695,6 +1724,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_nano2_frontend_attach,
.tuner_attach = cxusb_dvico_xc3028_tuner_attach,
@@ -1709,6 +1740,7 @@
}
}
},
+ }},
},
},
@@ -1747,6 +1779,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_nano2_frontend_attach,
.tuner_attach = cxusb_dvico_xc3028_tuner_attach,
@@ -1761,6 +1795,7 @@
}
}
},
+ }},
},
},
@@ -1796,6 +1831,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_aver_streaming_ctrl,
.frontend_attach = cxusb_aver_lgdt3303_frontend_attach,
.tuner_attach = cxusb_mxl5003s_tuner_attach,
@@ -1810,7 +1847,7 @@
}
}
},
-
+ }},
},
},
.power_ctrl = cxusb_aver_power_ctrl,
@@ -1839,10 +1876,12 @@
.num_adapters = 1,
.adapter = {
{
+ .size_of_priv = sizeof(struct dib0700_adapter_state),
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_streaming_ctrl,
.frontend_attach = cxusb_dualdig4_rev2_frontend_attach,
.tuner_attach = cxusb_dualdig4_rev2_tuner_attach,
- .size_of_priv = sizeof(struct dib0700_adapter_state),
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
@@ -1854,6 +1893,7 @@
}
}
},
+ }},
},
},
@@ -1889,6 +1929,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_d680_dmb_streaming_ctrl,
.frontend_attach = cxusb_d680_dmb_frontend_attach,
.tuner_attach = cxusb_d680_dmb_tuner_attach,
@@ -1904,6 +1946,7 @@
}
}
},
+ }},
},
},
@@ -1940,6 +1983,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = cxusb_d680_dmb_streaming_ctrl,
.frontend_attach = cxusb_mygica_d689_frontend_attach,
.tuner_attach = cxusb_mygica_d689_tuner_attach,
@@ -1955,6 +2000,7 @@
}
}
},
+ }},
},
},
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 5eb91b4..156cbfc 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -30,6 +30,11 @@
struct dib0700_state *st = d->priv;
int ret;
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
+
ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
REQUEST_GET_VERSION,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
@@ -46,6 +51,7 @@
if (fwtype != NULL)
*fwtype = (st->buf[12] << 24) | (st->buf[13] << 16) |
(st->buf[14] << 8) | st->buf[15];
+ mutex_unlock(&d->usb_mutex);
return ret;
}
@@ -108,7 +114,12 @@
int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
{
struct dib0700_state *st = d->priv;
- s16 ret;
+ int ret;
+
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
st->buf[0] = REQUEST_SET_GPIO;
st->buf[1] = gpio;
@@ -116,6 +127,7 @@
ret = dib0700_ctrl_wr(d, st->buf, 3);
+ mutex_unlock(&d->usb_mutex);
return ret;
}
@@ -125,6 +137,11 @@
int ret;
if (st->fw_version >= 0x10201) {
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
+
st->buf[0] = REQUEST_SET_USB_XFER_LEN;
st->buf[1] = (nb_ts_packets >> 8) & 0xff;
st->buf[2] = nb_ts_packets & 0xff;
@@ -132,6 +149,7 @@
deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
ret = dib0700_ctrl_wr(d, st->buf, 3);
+ mutex_unlock(&d->usb_mutex);
} else {
deb_info("this firmware does not allow to change the USB xfer len\n");
ret = -EIO;
@@ -208,6 +226,10 @@
} else {
/* Write request */
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
st->buf[0] = REQUEST_NEW_I2C_WRITE;
st->buf[1] = msg[i].addr << 1;
st->buf[2] = (en_start << 7) | (en_stop << 6) |
@@ -227,6 +249,7 @@
USB_TYPE_VENDOR | USB_DIR_OUT,
0, 0, st->buf, msg[i].len + 4,
USB_CTRL_GET_TIMEOUT);
+ mutex_unlock(&d->usb_mutex);
if (result < 0) {
deb_info("i2c write error (status = %d)\n", result);
break;
@@ -249,6 +272,10 @@
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
for (i = 0; i < num; i++) {
/* fill in the address */
@@ -279,6 +306,7 @@
break;
}
}
+ mutex_unlock(&d->usb_mutex);
mutex_unlock(&d->i2c_mutex);
return i;
@@ -337,7 +365,12 @@
u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
{
struct dib0700_state *st = d->priv;
- s16 ret;
+ int ret;
+
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
st->buf[0] = REQUEST_SET_CLOCK;
st->buf[1] = (en_pll << 7) | (pll_src << 6) |
@@ -352,6 +385,7 @@
st->buf[9] = dsuScaler & 0xff; /* LSB */
ret = dib0700_ctrl_wr(d, st->buf, 10);
+ mutex_unlock(&d->usb_mutex);
return ret;
}
@@ -360,10 +394,16 @@
{
struct dib0700_state *st = d->priv;
u16 divider;
+ int ret;
if (scl_kHz == 0)
return -EINVAL;
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
+
st->buf[0] = REQUEST_SET_I2C_PARAM;
divider = (u16) (30000 / scl_kHz);
st->buf[1] = 0;
@@ -379,7 +419,11 @@
deb_info("setting I2C speed: %04x %04x %04x (%d kHz).",
(st->buf[2] << 8) | (st->buf[3]), (st->buf[4] << 8) |
st->buf[5], (st->buf[6] << 8) | st->buf[7], scl_kHz);
- return dib0700_ctrl_wr(d, st->buf, 8);
+
+ ret = dib0700_ctrl_wr(d, st->buf, 8);
+ mutex_unlock(&d->usb_mutex);
+
+ return ret;
}
@@ -484,13 +528,13 @@
for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
adap_num++) {
if (fw_version >= 0x10201) {
- dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
+ dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
} else {
/* for fw version older than 1.20.1,
* the buffersize has to be n times 512 */
- dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
- if (dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize < 512)
- dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 512;
+ dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
+ if (dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize < 512)
+ dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 512;
}
}
}
@@ -515,6 +559,11 @@
}
}
+ if (mutex_lock_interruptible(&adap->dev->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
+
st->buf[0] = REQUEST_ENABLE_VIDEO;
/* this bit gives a kind of command,
* rather than enabling something or not */
@@ -530,25 +579,28 @@
deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id);
st->channel_state &= ~0x3;
- if ((adap->stream.props.endpoint != 2)
- && (adap->stream.props.endpoint != 3)) {
- deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->stream.props.endpoint);
+ if ((adap->fe_adap[0].stream.props.endpoint != 2)
+ && (adap->fe_adap[0].stream.props.endpoint != 3)) {
+ deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint);
if (onoff)
st->channel_state |= 1 << (adap->id);
else
st->channel_state |= 1 << ~(adap->id);
} else {
if (onoff)
- st->channel_state |= 1 << (adap->stream.props.endpoint-2);
+ st->channel_state |= 1 << (adap->fe_adap[0].stream.props.endpoint-2);
else
- st->channel_state |= 1 << (3-adap->stream.props.endpoint);
+ st->channel_state |= 1 << (3-adap->fe_adap[0].stream.props.endpoint);
}
st->buf[2] |= st->channel_state;
deb_info("data for streaming: %x %x\n", st->buf[1], st->buf[2]);
- return dib0700_ctrl_wr(adap->dev, st->buf, 4);
+ ret = dib0700_ctrl_wr(adap->dev, st->buf, 4);
+ mutex_unlock(&adap->dev->usb_mutex);
+
+ return ret;
}
int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
@@ -557,6 +609,11 @@
struct dib0700_state *st = d->priv;
int new_proto, ret;
+ if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
+ err("could not acquire lock");
+ return 0;
+ }
+
st->buf[0] = REQUEST_SET_RC;
st->buf[1] = 0;
st->buf[2] = 0;
@@ -567,23 +624,29 @@
else if (rc_type == RC_TYPE_NEC)
new_proto = 0;
else if (rc_type == RC_TYPE_RC6) {
- if (st->fw_version < 0x10200)
- return -EINVAL;
+ if (st->fw_version < 0x10200) {
+ ret = -EINVAL;
+ goto out;
+ }
new_proto = 2;
- } else
- return -EINVAL;
+ } else {
+ ret = -EINVAL;
+ goto out;
+ }
st->buf[1] = new_proto;
ret = dib0700_ctrl_wr(d, st->buf, 3);
if (ret < 0) {
err("ir protocol setup failed");
- return ret;
+ goto out;
}
d->props.rc.core.protocol = rc_type;
+out:
+ mutex_unlock(&d->usb_mutex);
return ret;
}
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index d0ea5b6..f313182 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -101,7 +101,7 @@
}
}
st->mt2060_if1[adap->id] = 1220;
- return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
+ return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
}
@@ -118,15 +118,16 @@
static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
{
struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
- struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
+ struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
s8 a;
int if1=1220;
if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
}
- return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
- if1) == NULL ? -ENODEV : 0;
+ return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
+ &bristol_mt2060_config[adap->id], if1) == NULL ?
+ -ENODEV : 0;
}
/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
@@ -279,10 +280,12 @@
}
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
- &stk7700d_dib7000p_mt2266_config[adap->id]);
+ adap->fe_adap[0].fe =
+ dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+ 0x80 + (adap->id << 1),
+ &stk7700d_dib7000p_mt2266_config[adap->id]);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
@@ -306,17 +309,19 @@
}
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
- &stk7700d_dib7000p_mt2266_config[adap->id]);
+ adap->fe_adap[0].fe =
+ dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+ 0x80 + (adap->id << 1),
+ &stk7700d_dib7000p_mt2266_config[adap->id]);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
{
struct i2c_adapter *tun_i2c;
- tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
- return dvb_attach(mt2266_attach, adap->fe, tun_i2c,
+ tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
&stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
}
@@ -396,8 +401,8 @@
switch (command) {
case XC2028_TUNER_RESET:
/* Send the tuner in then out of reset */
- dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10);
- dib7000p_set_gpio(adap->fe, 8, 0, 1);
+ dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10);
+ dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
break;
case XC2028_RESET_CLK:
break;
@@ -447,25 +452,25 @@
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&stk7700ph_dib7700_xc3028_config);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
{
struct i2c_adapter *tun_i2c;
- tun_i2c = dib7000p_get_i2c_master(adap->fe,
+ tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
stk7700ph_xc3028_config.i2c_adap = tun_i2c;
/* FIXME: generalize & move to common area */
- adap->fe->callback = stk7700ph_xc3028_callback;
+ adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
- return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config)
+ return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
== NULL ? -ENODEV : 0;
}
@@ -685,12 +690,12 @@
st->mt2060_if1[0] = 1220;
if (dib7000pc_detection(&adap->dev->i2c_adap)) {
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
st->is_dib7000pc = 1;
} else
- adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
+ adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static struct mt2060_config stk7700p_mt2060_config = {
@@ -709,11 +714,11 @@
if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
}
if (st->is_dib7000pc)
- tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
else
- tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
- return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
+ return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
if1) == NULL ? -ENODEV : 0;
}
@@ -843,33 +848,33 @@
static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
- struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
+ struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
- if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
- &dib7770p_dib0070_config) == NULL)
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
+ &dib7770p_dib0070_config) == NULL)
return -ENODEV;
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
return 0;
}
static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
- struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
if (adap->id == 0) {
- if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
return -ENODEV;
} else {
- if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
return -ENODEV;
}
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
return 0;
}
@@ -878,26 +883,26 @@
{
struct dib0700_state *st = adapter->dev->priv;
if (st->is_dib7000pc)
- return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
- return dib7000m_pid_filter(adapter->fe, index, pid, onoff);
+ return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
+ return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
}
static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
{
struct dib0700_state *st = adapter->dev->priv;
if (st->is_dib7000pc)
- return dib7000p_pid_filter_ctrl(adapter->fe, onoff);
- return dib7000m_pid_filter_ctrl(adapter->fe, onoff);
+ return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
+ return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
}
static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
{
- return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
+ return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
}
static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
{
- return dib7000p_pid_filter_ctrl(adapter->fe, onoff);
+ return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
}
static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
@@ -955,9 +960,9 @@
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&dib7070p_dib7000p_config);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
/* STK7770P */
@@ -1007,9 +1012,9 @@
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&dib7770p_dib7000p_config);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
/* DIB807x generic */
@@ -1225,34 +1230,34 @@
static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
- struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
+ struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
if (adap->id == 0) {
- if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
&dib807x_dib0070_config[0]) == NULL)
return -ENODEV;
} else {
- if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+ if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
&dib807x_dib0070_config[1]) == NULL)
return -ENODEV;
}
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
return 0;
}
static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
u16 pid, int onoff)
{
- return dib8000_pid_filter(adapter->fe, index, pid, onoff);
+ return dib8000_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
}
static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
int onoff)
{
- return dib8000_pid_filter_ctrl(adapter->fe, onoff);
+ return dib8000_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
}
/* STK807x */
@@ -1276,10 +1281,10 @@
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
0x80);
- adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+ adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
&dib807x_dib8000_config[0]);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
/* STK807xPVR */
@@ -1305,10 +1310,10 @@
/* initialize IC 0 */
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80);
- adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+ adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
&dib807x_dib8000_config[0]);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
@@ -1316,10 +1321,10 @@
/* initialize IC 1 */
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82);
- adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
+ adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
&dib807x_dib8000_config[1]);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
/* STK8096GP */
@@ -1546,13 +1551,13 @@
static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
- struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
- if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
return -ENODEV;
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
return 0;
}
@@ -1575,30 +1580,30 @@
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80);
- adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+ adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c;
- struct dvb_frontend *fe_slave = dib8000_get_slave_frontend(adap->fe, 1);
+ struct dvb_frontend *fe_slave = dib8000_get_slave_frontend(adap->fe_adap[0].fe, 1);
if (fe_slave) {
tun_i2c = dib8000_get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
return -ENODEV;
- fe_slave->dvb = adap->fe->dvb;
+ fe_slave->dvb = adap->fe_adap[0].fe->dvb;
fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
}
- tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
- if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+ tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
return -ENODEV;
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
return 0;
}
@@ -1626,12 +1631,12 @@
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80);
- adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
- if (adap->fe == NULL)
+ adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
+ if (adap->fe_adap[0].fe == NULL)
return -ENODEV;
fe_slave = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
- dib8000_set_slave_frontend(adap->fe, fe_slave);
+ dib8000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
return fe_slave == NULL ? -ENODEV : 0;
}
@@ -1639,12 +1644,12 @@
/* STK9090M */
static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
{
- return dib9000_fw_pid_filter(adapter->fe, index, pid, onoff);
+ return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
}
static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
{
- return dib9000_fw_pid_filter_ctrl(adapter->fe, onoff);
+ return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
}
static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
@@ -1856,15 +1861,15 @@
stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
- adap->fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
+ adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *state = adap->priv;
- struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe);
+ struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
u16 data_dib190[10] = {
1, 0x1374,
2, 0x01a2,
@@ -1873,13 +1878,13 @@
8, 0x0486,
};
- if (dvb_attach(dib0090_fw_register, adap->fe, i2c, &dib9090_dib0090_config) == NULL)
+ if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
return -ENODEV;
- i2c = dib9000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+ i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
return -ENODEV;
dib0700_set_i2c_speed(adap->dev, 2000);
- if (dib9000_firmware_post_pll_init(adap->fe) < 0)
+ if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
return -ENODEV;
release_firmware(state->frontend_firmware);
return 0;
@@ -1925,16 +1930,16 @@
nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
- adap->fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
+ adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -ENODEV;
- i2c = dib9000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
+ i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
- dib9000_set_slave_frontend(adap->fe, fe_slave);
+ dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
return fe_slave == NULL ? -ENODEV : 0;
}
@@ -1951,26 +1956,26 @@
0, 0x00ef,
8, 0x0406,
};
- i2c = dib9000_get_tuner_interface(adap->fe);
- if (dvb_attach(dib0090_fw_register, adap->fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
+ i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
+ if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
return -ENODEV;
- i2c = dib9000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+ i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
return -ENODEV;
dib0700_set_i2c_speed(adap->dev, 2000);
- if (dib9000_firmware_post_pll_init(adap->fe) < 0)
+ if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
return -ENODEV;
- fe_slave = dib9000_get_slave_frontend(adap->fe, 1);
+ fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
if (fe_slave != NULL) {
- i2c = dib9000_get_component_bus_interface(adap->fe);
+ i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
dib9000_set_i2c_adapter(fe_slave, i2c);
i2c = dib9000_get_tuner_interface(fe_slave);
if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
return -ENODEV;
- fe_slave->dvb = adap->fe->dvb;
- dib9000_fw_set_component_bus_speed(adap->fe, 2000);
+ fe_slave->dvb = adap->fe_adap[0].fe->dvb;
+ dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 2000);
if (dib9000_firmware_post_pll_init(fe_slave) < 0)
return -ENODEV;
}
@@ -2393,23 +2398,23 @@
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
- struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe);
+ struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
- if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &nim7090_dib0090_config) == NULL)
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
return -ENODEV;
- dib7000p_set_gpio(adap->fe, 8, 0, 1);
+ dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
return 0;
}
@@ -2439,11 +2444,11 @@
}
dib0700_set_i2c_speed(adap->dev, 340);
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
- if (adap->fe == NULL)
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
+ if (adap->fe_adap[0].fe == NULL)
return -ENODEV;
- dib7090_slave_reset(adap->fe);
+ dib7090_slave_reset(adap->fe_adap[0].fe);
return 0;
}
@@ -2452,50 +2457,50 @@
{
struct i2c_adapter *i2c;
- if (adap->dev->adapter[0].fe == NULL) {
+ if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
err("the master dib7090 has to be initialized first");
return -ENODEV; /* the master device has not been initialized */
}
- i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
+ i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
if (dib7000p_i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
dib0700_set_i2c_speed(adap->dev, 200);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
- struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe);
+ struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
- if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
return -ENODEV;
- dib7000p_set_gpio(adap->fe, 8, 0, 1);
+ dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
return 0;
}
static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
- struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe);
+ struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
- if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
return -ENODEV;
- dib7000p_set_gpio(adap->fe, 8, 0, 1);
+ dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
- st->set_param_save = adap->fe->ops.tuner_ops.set_params;
- adap->fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
return 0;
}
@@ -2555,14 +2560,14 @@
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
- return adap->fe == NULL ? -ENODEV : 0;
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
{
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
- return adap->fe == NULL ? -ENODEV : 0;
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
/* S5H1411 */
@@ -2617,9 +2622,9 @@
dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
/* GPIOs are initialized, do the attach */
- adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
+ adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
&adap->dev->i2c_adap);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int dib0700_xc5000_tuner_callback(void *priv, int component,
@@ -2649,9 +2654,9 @@
static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
{
/* FIXME: generalize & move to common area */
- adap->fe->callback = dib0700_xc5000_tuner_callback;
+ adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
- return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap,
+ return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&s5h1411_xc5000_tunerconfig)
== NULL ? -ENODEV : 0;
}
@@ -2663,9 +2668,9 @@
if (command == XC4000_TUNER_RESET) {
/* Reset the tuner */
- dib7000p_set_gpio(adap->fe, 8, 0, 0);
+ dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
msleep(10);
- dib7000p_set_gpio(adap->fe, 8, 0, 1);
+ dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
} else {
err("xc4000: unknown tuner callback command: %d\n", command);
return -EINVAL;
@@ -2771,11 +2776,11 @@
return -ENODEV;
}
- adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
+ adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
&pctv_340e_config);
st->is_dib7000pc = 1;
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static struct xc4000_config dib7000p_xc4000_tunerconfig = {
@@ -2791,7 +2796,7 @@
struct i2c_adapter *tun_i2c;
/* The xc4000 is not on the main i2c bus */
- tun_i2c = dib7000p_get_i2c_master(adap->fe,
+ tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
if (tun_i2c == NULL) {
printk(KERN_ERR "Could not reach tuner i2c bus\n");
@@ -2799,9 +2804,9 @@
}
/* Setup the reset callback */
- adap->fe->callback = dib0700_xc4000_tuner_callback;
+ adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
- return dvb_attach(xc4000_attach, adap->fe, tun_i2c,
+ return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
&dib7000p_xc4000_tunerconfig)
== NULL ? -ENODEV : 0;
}
@@ -2857,16 +2862,16 @@
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
msleep(30);
- adap->fe = dvb_attach(lgdt3305_attach,
+ adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
&hcw_lgdt3305_config,
&adap->dev->i2c_adap);
- return adap->fe == NULL ? -ENODEV : 0;
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
{
- return dvb_attach(mxl5007t_attach, adap->fe,
+ return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, 0x60,
&hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
}
@@ -2989,6 +2994,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk7700p_pid_filter,
@@ -2997,6 +3004,7 @@
.tuner_attach = stk7700p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
},
},
@@ -3050,15 +3058,21 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = bristol_frontend_attach,
.tuner_attach = bristol_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
}, {
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = bristol_frontend_attach,
.tuner_attach = bristol_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
}
},
@@ -3084,6 +3098,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3092,7 +3108,10 @@
.tuner_attach = stk7700d_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
}, {
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3101,6 +3120,7 @@
.tuner_attach = stk7700d_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ }},
}
},
@@ -3143,6 +3163,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3151,6 +3173,7 @@
.tuner_attach = stk7700d_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ }},
},
},
@@ -3185,6 +3208,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3193,7 +3218,7 @@
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct dib0700_adapter_state),
},
},
@@ -3261,6 +3286,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3269,7 +3296,7 @@
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct dib0700_adapter_state),
},
},
@@ -3305,6 +3332,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3313,9 +3342,11 @@
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct dib0700_adapter_state),
}, {
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3324,7 +3355,7 @@
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-
+ }},
.size_of_priv = sizeof(struct dib0700_adapter_state),
}
},
@@ -3373,6 +3404,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3381,9 +3414,11 @@
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct dib0700_adapter_state),
}, {
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3392,7 +3427,7 @@
.tuner_attach = dib7070p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-
+ }},
.size_of_priv = sizeof(struct dib0700_adapter_state),
}
},
@@ -3420,6 +3455,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3428,7 +3465,7 @@
.tuner_attach = stk7700ph_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct
dib0700_adapter_state),
},
@@ -3488,11 +3525,13 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = s5h1411_frontend_attach,
.tuner_attach = xc5000_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct
dib0700_adapter_state),
},
@@ -3524,11 +3563,13 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = lgdt3305_frontend_attach,
.tuner_attach = mxl5007t_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct
dib0700_adapter_state),
},
@@ -3550,6 +3591,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
@@ -3558,7 +3601,7 @@
.tuner_attach = dib7770p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3600,6 +3643,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
@@ -3608,7 +3653,7 @@
.tuner_attach = dib807x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3644,6 +3689,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
@@ -3652,11 +3699,13 @@
.tuner_attach = dib807x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
@@ -3665,7 +3714,7 @@
.tuner_attach = dib807x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3693,6 +3742,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -3702,7 +3753,7 @@
.tuner_attach = dib809x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3730,6 +3781,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -3739,7 +3792,7 @@
.tuner_attach = dib9090_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3767,6 +3820,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -3776,7 +3831,7 @@
.tuner_attach = nim8096md_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3804,6 +3859,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -3813,7 +3870,7 @@
.tuner_attach = nim9090md_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3841,6 +3898,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -3850,7 +3909,7 @@
.tuner_attach = nim7090_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3878,6 +3937,8 @@
.num_adapters = 2,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -3887,11 +3948,13 @@
.tuner_attach = tfe7090pvr_tuner0_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -3901,7 +3964,7 @@
.tuner_attach = tfe7090pvr_tuner1_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
@@ -3929,11 +3992,13 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = pctv340e_frontend_attach,
.tuner_attach = xc4000_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
-
+ }},
.size_of_priv = sizeof(struct
dib0700_adapter_state),
},
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index 4c2a689..a76bbb2 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -23,7 +23,7 @@
if (adap->priv != NULL) {
struct dibusb_state *st = adap->priv;
if (st->ops.fifo_ctrl != NULL)
- if (st->ops.fifo_ctrl(adap->fe,onoff)) {
+ if (st->ops.fifo_ctrl(adap->fe_adap[0].fe, onoff)) {
err("error while controlling the fifo of the demod.");
return -ENODEV;
}
@@ -37,7 +37,8 @@
if (adap->priv != NULL) {
struct dibusb_state *st = adap->priv;
if (st->ops.pid_ctrl != NULL)
- st->ops.pid_ctrl(adap->fe,index,pid,onoff);
+ st->ops.pid_ctrl(adap->fe_adap[0].fe,
+ index, pid, onoff);
}
return 0;
}
@@ -48,7 +49,7 @@
if (adap->priv != NULL) {
struct dibusb_state *st = adap->priv;
if (st->ops.pid_parse != NULL)
- if (st->ops.pid_parse(adap->fe,onoff) < 0)
+ if (st->ops.pid_parse(adap->fe_adap[0].fe, onoff) < 0)
err("could not handle pid_parser");
}
return 0;
@@ -254,8 +255,16 @@
msleep(1000);
}
- if ((adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000P_I2C_ADDRESS, &mod3000p_dib3000p_config)) != NULL ||
- (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000MC_I2C_ADDRESS, &mod3000p_dib3000p_config)) != NULL) {
+ adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
+ &adap->dev->i2c_adap,
+ DEFAULT_DIB3000P_I2C_ADDRESS,
+ &mod3000p_dib3000p_config);
+ if ((adap->fe_adap[0].fe) == NULL)
+ adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
+ &adap->dev->i2c_adap,
+ DEFAULT_DIB3000MC_I2C_ADDRESS,
+ &mod3000p_dib3000p_config);
+ if ((adap->fe_adap[0].fe) != NULL) {
if (adap->priv != NULL) {
struct dibusb_state *st = adap->priv;
st->ops.pid_parse = dib3000mc_pid_parse;
@@ -309,15 +318,15 @@
}
}
- tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
- if (dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) {
+ tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
+ if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) {
/* not found - use panasonic pll parameters */
- if (dvb_attach(dvb_pll_attach, adap->fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL)
+ if (dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL)
return -ENOMEM;
} else {
st->mt2060_present = 1;
/* set the correct parameters for the dib3000p */
- dib3000mc_set_config(adap->fe, &stk3000p_dib3000p_config);
+ dib3000mc_set_config(adap->fe_adap[0].fe, &stk3000p_dib3000p_config);
}
return 0;
}
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index 04d91bd..7270791 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -31,11 +31,12 @@
demod_cfg.demod_address = 0x8;
- if ((adap->fe = dvb_attach(dib3000mb_attach, &demod_cfg,
- &adap->dev->i2c_adap, &st->ops)) == NULL)
+ adap->fe_adap[0].fe = dvb_attach(dib3000mb_attach, &demod_cfg,
+ &adap->dev->i2c_adap, &st->ops);
+ if ((adap->fe_adap[0].fe) == NULL)
return -ENODEV;
- adap->fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl;
+ adap->fe_adap[0].fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl;
return 0;
}
@@ -46,7 +47,7 @@
st->tuner_addr = 0x61;
- dvb_attach(dvb_pll_attach, adap->fe, 0x61, &adap->dev->i2c_adap,
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap,
DVB_PLL_TUA6010XS);
return 0;
}
@@ -57,7 +58,7 @@
st->tuner_addr = 0x60;
- dvb_attach(dvb_pll_attach, adap->fe, 0x60, &adap->dev->i2c_adap,
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap,
DVB_PLL_TDA665X);
return 0;
}
@@ -78,16 +79,16 @@
/* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */
msg[0].addr = msg[1].addr = st->tuner_addr = 0x60;
- if (adap->fe->ops.i2c_gate_ctrl)
- adap->fe->ops.i2c_gate_ctrl(adap->fe,1);
+ if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
+ adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1);
if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
err("tuner i2c write failed.");
ret = -EREMOTEIO;
}
- if (adap->fe->ops.i2c_gate_ctrl)
- adap->fe->ops.i2c_gate_ctrl(adap->fe,0);
+ if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
+ adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0);
if (b2[0] == 0xfe) {
info("This device has the Thomson Cable onboard. Which is default.");
@@ -185,6 +186,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
@@ -205,6 +208,7 @@
}
}
},
+ }},
.size_of_priv = sizeof(struct dibusb_state),
}
},
@@ -272,6 +276,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER,
.pid_filter_count = 16,
@@ -292,6 +298,7 @@
}
}
},
+ }},
.size_of_priv = sizeof(struct dibusb_state),
},
},
@@ -338,6 +345,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
@@ -358,6 +367,7 @@
}
}
},
+ }},
.size_of_priv = sizeof(struct dibusb_state),
}
},
@@ -398,6 +408,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
@@ -417,6 +429,7 @@
}
}
},
+ }},
.size_of_priv = sizeof(struct dibusb_state),
}
},
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
index c1d9094..9c165e2 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c
@@ -57,6 +57,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.streaming_ctrl = dibusb2_0_streaming_ctrl,
@@ -76,6 +78,7 @@
}
}
},
+ }},
.size_of_priv = sizeof(struct dibusb_state),
}
},
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index f6344cd..f7184111 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -137,11 +137,16 @@
{
struct digitv_state *st = adap->dev->priv;
- if ((adap->fe = dvb_attach(mt352_attach, &digitv_mt352_config, &adap->dev->i2c_adap)) != NULL) {
+ adap->fe_adap[0].fe = dvb_attach(mt352_attach, &digitv_mt352_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL) {
st->is_nxt6000 = 0;
return 0;
}
- if ((adap->fe = dvb_attach(nxt6000_attach, &digitv_nxt6000_config, &adap->dev->i2c_adap)) != NULL) {
+ adap->fe_adap[0].fe = dvb_attach(nxt6000_attach,
+ &digitv_nxt6000_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) != NULL) {
st->is_nxt6000 = 1;
return 0;
}
@@ -152,11 +157,11 @@
{
struct digitv_state *st = adap->dev->priv;
- if (!dvb_attach(dvb_pll_attach, adap->fe, 0x60, NULL, DVB_PLL_TDED4))
+ if (!dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, NULL, DVB_PLL_TDED4))
return -ENODEV;
if (st->is_nxt6000)
- adap->fe->ops.tuner_ops.set_params = digitv_nxt6000_tuner_set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = digitv_nxt6000_tuner_set_params;
return 0;
}
@@ -292,6 +297,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = digitv_frontend_attach,
.tuner_attach = digitv_tuner_attach,
@@ -306,6 +313,7 @@
}
}
},
+ }},
}
},
.identify_state = digitv_identify_state,
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index ecd86ec..106dfd5 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -90,7 +90,7 @@
static int dtt200u_frontend_attach(struct dvb_usb_adapter *adap)
{
- adap->fe = dtt200u_fe_attach(adap->dev);
+ adap->fe_adap[0].fe = dtt200u_fe_attach(adap->dev);
return 0;
}
@@ -140,6 +140,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
.pid_filter_count = 15,
@@ -157,6 +159,7 @@
}
}
},
+ }},
}
},
.power_ctrl = dtt200u_power_ctrl,
@@ -187,6 +190,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
.pid_filter_count = 15,
@@ -204,6 +209,7 @@
}
}
},
+ }},
}
},
.power_ctrl = dtt200u_power_ctrl,
@@ -234,6 +240,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
.pid_filter_count = 15,
@@ -251,6 +259,7 @@
}
}
},
+ }},
}
},
.power_ctrl = dtt200u_power_ctrl,
@@ -281,6 +290,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
.pid_filter_count = 15,
@@ -298,6 +309,7 @@
}
}
},
+ }},
}
},
.power_ctrl = dtt200u_power_ctrl,
diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c
index 078ce92..7373132 100644
--- a/drivers/media/dvb/dvb-usb/dtv5100.c
+++ b/drivers/media/dvb/dvb-usb/dtv5100.c
@@ -115,13 +115,13 @@
static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap)
{
- adap->fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config,
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config,
&adap->dev->i2c_adap);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
/* disable i2c gate, or it won't work... is this safe? */
- adap->fe->ops.i2c_gate_ctrl = NULL;
+ adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL;
return 0;
}
@@ -133,7 +133,7 @@
static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap)
{
return dvb_attach(qt1010_attach,
- adap->fe, &adap->dev->i2c_adap,
+ adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&dtv5100_qt1010_config) == NULL ? -ENODEV : 0;
}
@@ -180,6 +180,8 @@
.num_adapters = 1,
.adapter = {{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = dtv5100_frontend_attach,
.tuner_attach = dtv5100_tuner_attach,
@@ -193,6 +195,7 @@
}
}
},
+ }},
} },
.i2c_algo = &dtv5100_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
index b3cb626..ba4a751 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
@@ -17,15 +17,20 @@
if (adap == NULL)
return -ENODEV;
+ if ((adap->active_fe < 0) ||
+ (adap->active_fe >= adap->num_frontends_initialized)) {
+ return -EINVAL;
+ }
+
newfeedcount = adap->feedcount + (onoff ? 1 : -1);
/* stop feed before setting a new pid if there will be no pid anymore */
if (newfeedcount == 0) {
deb_ts("stop feeding\n");
- usb_urb_kill(&adap->stream);
+ usb_urb_kill(&adap->fe_adap[adap->active_fe].stream);
- if (adap->props.streaming_ctrl != NULL) {
- ret = adap->props.streaming_ctrl(adap, 0);
+ if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) {
+ ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 0);
if (ret < 0) {
err("error while stopping stream.");
return ret;
@@ -36,36 +41,37 @@
adap->feedcount = newfeedcount;
/* activate the pid on the device specific pid_filter */
- deb_ts("setting pid (%s): %5d %04x at index %d '%s'\n",adap->pid_filtering ?
- "yes" : "no", dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ?
- "on" : "off");
- if (adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER &&
- adap->pid_filtering &&
- adap->props.pid_filter != NULL)
- adap->props.pid_filter(adap, dvbdmxfeed->index, dvbdmxfeed->pid,onoff);
+ deb_ts("setting pid (%s): %5d %04x at index %d '%s'\n",
+ adap->fe_adap[adap->active_fe].pid_filtering ?
+ "yes" : "no", dvbdmxfeed->pid, dvbdmxfeed->pid,
+ dvbdmxfeed->index, onoff ? "on" : "off");
+ if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER &&
+ adap->fe_adap[adap->active_fe].pid_filtering &&
+ adap->props.fe[adap->active_fe].pid_filter != NULL)
+ adap->props.fe[adap->active_fe].pid_filter(adap, dvbdmxfeed->index, dvbdmxfeed->pid, onoff);
/* start the feed if this was the first feed and there is still a feed
* for reception.
*/
if (adap->feedcount == onoff && adap->feedcount > 0) {
deb_ts("submitting all URBs\n");
- usb_urb_submit(&adap->stream);
+ usb_urb_submit(&adap->fe_adap[adap->active_fe].stream);
deb_ts("controlling pid parser\n");
- if (adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER &&
- adap->props.caps &
+ if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER &&
+ adap->props.fe[adap->active_fe].caps &
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF &&
- adap->props.pid_filter_ctrl != NULL) {
- ret = adap->props.pid_filter_ctrl(adap,
- adap->pid_filtering);
+ adap->props.fe[adap->active_fe].pid_filter_ctrl != NULL) {
+ ret = adap->props.fe[adap->active_fe].pid_filter_ctrl(adap,
+ adap->fe_adap[adap->active_fe].pid_filtering);
if (ret < 0) {
err("could not handle pid_parser");
return ret;
}
}
deb_ts("start feeding\n");
- if (adap->props.streaming_ctrl != NULL) {
- ret = adap->props.streaming_ctrl(adap, 1);
+ if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) {
+ ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 1);
if (ret < 0) {
err("error while enabling fifo.");
return ret;
@@ -90,6 +96,7 @@
int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums)
{
+ int i;
int ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name,
adap->dev->owner, &adap->dev->udev->dev,
adapter_nums);
@@ -112,7 +119,12 @@
adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
adap->demux.priv = adap;
- adap->demux.feednum = adap->demux.filternum = adap->max_feed_count;
+ adap->demux.filternum = 0;
+ for (i = 0; i < adap->props.num_frontends; i++) {
+ if (adap->demux.filternum < adap->fe_adap[i].max_feed_count)
+ adap->demux.filternum = adap->fe_adap[i].max_feed_count;
+ }
+ adap->demux.feednum = adap->demux.filternum;
adap->demux.start_feed = dvb_usb_start_feed;
adap->demux.stop_feed = dvb_usb_stop_feed;
adap->demux.write_to_decoder = NULL;
@@ -156,14 +168,33 @@
return 0;
}
+static int dvb_usb_set_active_fe(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+ int ret = (adap->props.frontend_ctrl) ?
+ adap->props.frontend_ctrl(fe, onoff) : 0;
+
+ if (ret < 0) {
+ err("frontend_ctrl request failed");
+ return ret;
+ }
+ if (onoff)
+ adap->active_fe = fe->id;
+
+ return 0;
+}
+
static int dvb_usb_fe_wakeup(struct dvb_frontend *fe)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
dvb_usb_device_power_ctrl(adap->dev, 1);
- if (adap->fe_init)
- adap->fe_init(fe);
+ dvb_usb_set_active_fe(fe, 1);
+
+ if (adap->fe_adap[fe->id].fe_init)
+ adap->fe_adap[fe->id].fe_init(fe);
return 0;
}
@@ -172,45 +203,81 @@
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
- if (adap->fe_sleep)
- adap->fe_sleep(fe);
+ if (adap->fe_adap[fe->id].fe_sleep)
+ adap->fe_adap[fe->id].fe_sleep(fe);
+
+ dvb_usb_set_active_fe(fe, 0);
return dvb_usb_device_power_ctrl(adap->dev, 0);
}
int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap)
{
- if (adap->props.frontend_attach == NULL) {
- err("strange: '%s' #%d doesn't want to attach a frontend.",adap->dev->desc->name, adap->id);
- return 0;
- }
+ int ret, i;
- /* re-assign sleep and wakeup functions */
- if (adap->props.frontend_attach(adap) == 0 && adap->fe != NULL) {
- adap->fe_init = adap->fe->ops.init; adap->fe->ops.init = dvb_usb_fe_wakeup;
- adap->fe_sleep = adap->fe->ops.sleep; adap->fe->ops.sleep = dvb_usb_fe_sleep;
+ /* register all given adapter frontends */
+ for (i = 0; i < adap->props.num_frontends; i++) {
- if (dvb_register_frontend(&adap->dvb_adap, adap->fe)) {
- err("Frontend registration failed.");
- dvb_frontend_detach(adap->fe);
- adap->fe = NULL;
- return -ENODEV;
+ if (adap->props.fe[i].frontend_attach == NULL) {
+ err("strange: '%s' #%d,%d "
+ "doesn't want to attach a frontend.",
+ adap->dev->desc->name, adap->id, i);
+
+ return 0;
+ }
+
+ ret = adap->props.fe[i].frontend_attach(adap);
+ if (ret || adap->fe_adap[i].fe == NULL) {
+ /* only print error when there is no FE at all */
+ if (i == 0)
+ err("no frontend was attached by '%s'",
+ adap->dev->desc->name);
+
+ return 0;
+ }
+
+ adap->fe_adap[i].fe->id = i;
+
+ /* re-assign sleep and wakeup functions */
+ adap->fe_adap[i].fe_init = adap->fe_adap[i].fe->ops.init;
+ adap->fe_adap[i].fe->ops.init = dvb_usb_fe_wakeup;
+ adap->fe_adap[i].fe_sleep = adap->fe_adap[i].fe->ops.sleep;
+ adap->fe_adap[i].fe->ops.sleep = dvb_usb_fe_sleep;
+
+ if (dvb_register_frontend(&adap->dvb_adap, adap->fe_adap[i].fe)) {
+ err("Frontend %d registration failed.", i);
+ dvb_frontend_detach(adap->fe_adap[i].fe);
+ adap->fe_adap[i].fe = NULL;
+ /* In error case, do not try register more FEs,
+ * still leaving already registered FEs alive. */
+ if (i == 0)
+ return -ENODEV;
+ else
+ return 0;
}
/* only attach the tuner if the demod is there */
- if (adap->props.tuner_attach != NULL)
- adap->props.tuner_attach(adap);
- } else
- err("no frontend was attached by '%s'",adap->dev->desc->name);
+ if (adap->props.fe[i].tuner_attach != NULL)
+ adap->props.fe[i].tuner_attach(adap);
+
+ adap->num_frontends_initialized++;
+ }
return 0;
}
int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap)
{
- if (adap->fe != NULL) {
- dvb_unregister_frontend(adap->fe);
- dvb_frontend_detach(adap->fe);
+ int i = adap->num_frontends_initialized - 1;
+
+ /* unregister all given adapter frontends */
+ for (; i >= 0; i--) {
+ if (adap->fe_adap[i].fe != NULL) {
+ dvb_unregister_frontend(adap->fe_adap[i].fe);
+ dvb_frontend_detach(adap->fe_adap[i].fe);
+ }
}
+ adap->num_frontends_initialized = 0;
+
return 0;
}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 2a79b8f..2ad33ba 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -136,6 +136,7 @@
#define USB_PID_KWORLD_PC160_2T 0xc160
#define USB_PID_KWORLD_PC160_T 0xc161
#define USB_PID_KWORLD_UB383_T 0xe383
+#define USB_PID_KWORLD_UB499_2T_T09 0xe409
#define USB_PID_KWORLD_VSTREAM_COLD 0x17de
#define USB_PID_KWORLD_VSTREAM_WARM 0x17df
#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055
@@ -240,6 +241,9 @@
#define USB_PID_PCTV_200E 0x020e
#define USB_PID_PCTV_400E 0x020f
#define USB_PID_PCTV_450E 0x0222
+#define USB_PID_PCTV_452E 0x021f
+#define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007
+#define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI 0x300a
#define USB_PID_NEBULA_DIGITV 0x0201
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index 2e3ea0f..169196e 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -29,7 +29,7 @@
static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
{
struct dvb_usb_adapter *adap;
- int ret, n;
+ int ret, n, o;
for (n = 0; n < d->props.num_adapters; n++) {
adap = &d->adapter[n];
@@ -38,31 +38,42 @@
memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties));
+ for (o = 0; o < adap->props.num_frontends; o++) {
+ struct dvb_usb_adapter_fe_properties *props = &adap->props.fe[o];
/* speed - when running at FULL speed we need a HW PID filter */
- if (d->udev->speed == USB_SPEED_FULL && !(adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER)) {
+ if (d->udev->speed == USB_SPEED_FULL && !(props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) {
err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)");
return -ENODEV;
}
- if ((d->udev->speed == USB_SPEED_FULL && adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) ||
- (adap->props.caps & DVB_USB_ADAP_NEED_PID_FILTERING)) {
- info("will use the device's hardware PID filter (table count: %d).", adap->props.pid_filter_count);
- adap->pid_filtering = 1;
- adap->max_feed_count = adap->props.pid_filter_count;
+ if ((d->udev->speed == USB_SPEED_FULL && props->caps & DVB_USB_ADAP_HAS_PID_FILTER) ||
+ (props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) {
+ info("will use the device's hardware PID filter (table count: %d).", props->pid_filter_count);
+ adap->fe_adap[o].pid_filtering = 1;
+ adap->fe_adap[o].max_feed_count = props->pid_filter_count;
} else {
info("will pass the complete MPEG2 transport stream to the software demuxer.");
- adap->pid_filtering = 0;
- adap->max_feed_count = 255;
+ adap->fe_adap[o].pid_filtering = 0;
+ adap->fe_adap[o].max_feed_count = 255;
}
- if (!adap->pid_filtering &&
+ if (!adap->fe_adap[o].pid_filtering &&
dvb_usb_force_pid_filter_usage &&
- adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) {
+ props->caps & DVB_USB_ADAP_HAS_PID_FILTER) {
info("pid filter enabled by module option.");
- adap->pid_filtering = 1;
- adap->max_feed_count = adap->props.pid_filter_count;
+ adap->fe_adap[o].pid_filtering = 1;
+ adap->fe_adap[o].max_feed_count = props->pid_filter_count;
}
+ if (props->size_of_priv > 0) {
+ adap->fe_adap[o].priv = kzalloc(props->size_of_priv, GFP_KERNEL);
+ if (adap->fe_adap[o].priv == NULL) {
+ err("no memory for priv for adapter %d fe %d.", n, o);
+ return -ENOMEM;
+ }
+ }
+ }
+
if (adap->props.size_of_priv > 0) {
adap->priv = kzalloc(adap->props.size_of_priv, GFP_KERNEL);
if (adap->priv == NULL) {
@@ -77,6 +88,10 @@
return ret;
}
+ /* use exclusive FE lock if there is multiple shared FEs */
+ if (adap->fe_adap[1].fe)
+ adap->dvb_adap.mfe_shared = 1;
+
d->num_adapters_initialized++;
d->state |= DVB_USB_STATE_DVB;
}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
index bb46ba6..53a5c30 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
@@ -82,16 +82,28 @@
int dvb_usb_adapter_stream_init(struct dvb_usb_adapter *adap)
{
- adap->stream.udev = adap->dev->udev;
- if (adap->props.caps & DVB_USB_ADAP_RECEIVES_204_BYTE_TS)
- adap->stream.complete = dvb_usb_data_complete_204;
- else
- adap->stream.complete = dvb_usb_data_complete;
- adap->stream.user_priv = adap;
- return usb_urb_init(&adap->stream, &adap->props.stream);
+ int i, ret = 0;
+ for (i = 0; i < adap->props.num_frontends; i++) {
+
+ adap->fe_adap[i].stream.udev = adap->dev->udev;
+ if (adap->props.fe[i].caps & DVB_USB_ADAP_RECEIVES_204_BYTE_TS)
+ adap->fe_adap[i].stream.complete =
+ dvb_usb_data_complete_204;
+ else
+ adap->fe_adap[i].stream.complete = dvb_usb_data_complete;
+ adap->fe_adap[i].stream.user_priv = adap;
+ ret = usb_urb_init(&adap->fe_adap[i].stream,
+ &adap->props.fe[i].stream);
+ if (ret < 0)
+ break;
+ }
+ return ret;
}
int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap)
{
- return usb_urb_exit(&adap->stream);
+ int i;
+ for (i = 0; i < adap->props.num_frontends; i++)
+ usb_urb_exit(&adap->fe_adap[i].stream);
+ return 0;
}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 7d35d07..6d7d13f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -124,6 +124,8 @@
* @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
+ * @num_frontends: number of frontends of the DVB USB adapter.
+ * @frontend_ctrl: called to power on/off active frontend.
* @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the
* device (not URB submitting/killing).
* @pid_filter_ctrl: called to en/disable the PID filter, if any.
@@ -134,7 +136,7 @@
* pll_desc and pll_init_buf of struct dvb_usb_device).
* @stream: configuration of the USB streaming
*/
-struct dvb_usb_adapter_properties {
+struct dvb_usb_adapter_fe_properties {
#define DVB_USB_ADAP_HAS_PID_FILTER 0x01
#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
#define DVB_USB_ADAP_NEED_PID_FILTERING 0x04
@@ -152,9 +154,18 @@
struct usb_data_stream_properties stream;
int size_of_priv;
+};
+#define MAX_NO_OF_FE_PER_ADAP 2
+struct dvb_usb_adapter_properties {
+ int size_of_priv;
+
+ int (*frontend_ctrl) (struct dvb_frontend *, int);
int (*fe_ioctl_override) (struct dvb_frontend *,
unsigned int, void *, unsigned int);
+
+ int num_frontends;
+ struct dvb_usb_adapter_fe_properties fe[MAX_NO_OF_FE_PER_ADAP];
};
/**
@@ -345,6 +356,20 @@
*
* @stream: the usb data stream.
*/
+struct dvb_usb_fe_adapter {
+ struct dvb_frontend *fe;
+
+ int (*fe_init) (struct dvb_frontend *);
+ int (*fe_sleep) (struct dvb_frontend *);
+
+ struct usb_data_stream stream;
+
+ int pid_filtering;
+ int max_feed_count;
+
+ void *priv;
+};
+
struct dvb_usb_adapter {
struct dvb_usb_device *dev;
struct dvb_usb_adapter_properties props;
@@ -356,20 +381,16 @@
u8 id;
int feedcount;
- int pid_filtering;
/* dvb */
struct dvb_adapter dvb_adap;
struct dmxdev dmxdev;
struct dvb_demux demux;
struct dvb_net dvb_net;
- struct dvb_frontend *fe;
- int max_feed_count;
- int (*fe_init) (struct dvb_frontend *);
- int (*fe_sleep) (struct dvb_frontend *);
-
- struct usb_data_stream stream;
+ struct dvb_usb_fe_adapter fe_adap[MAX_NO_OF_FE_PER_ADAP];
+ int active_fe;
+ int num_frontends_initialized;
void *priv;
};
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 058b231..f103ec1 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -992,18 +992,18 @@
struct dvb_tuner_ops *tuner_ops = NULL;
if (demod_probe & 4) {
- d->fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config,
+ d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config,
&d->dev->i2c_adap, 0);
- if (d->fe != NULL) {
- if (dvb_attach(stb6100_attach, d->fe,
+ if (d->fe_adap[0].fe != NULL) {
+ if (dvb_attach(stb6100_attach, d->fe_adap[0].fe,
&dw2104a_stb6100_config,
&d->dev->i2c_adap)) {
- tuner_ops = &d->fe->ops.tuner_ops;
+ tuner_ops = &d->fe_adap[0].fe->ops.tuner_ops;
tuner_ops->set_frequency = stb6100_set_freq;
tuner_ops->get_frequency = stb6100_get_freq;
tuner_ops->set_bandwidth = stb6100_set_bandw;
tuner_ops->get_bandwidth = stb6100_get_bandw;
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached STV0900+STB6100!\n");
return 0;
}
@@ -1011,13 +1011,13 @@
}
if (demod_probe & 2) {
- d->fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config,
+ d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config,
&d->dev->i2c_adap, 0);
- if (d->fe != NULL) {
- if (dvb_attach(stv6110_attach, d->fe,
+ if (d->fe_adap[0].fe != NULL) {
+ if (dvb_attach(stv6110_attach, d->fe_adap[0].fe,
&dw2104_stv6110_config,
&d->dev->i2c_adap)) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached STV0900+STV6110A!\n");
return 0;
}
@@ -1025,19 +1025,19 @@
}
if (demod_probe & 1) {
- d->fe = dvb_attach(cx24116_attach, &dw2104_config,
+ d->fe_adap[0].fe = dvb_attach(cx24116_attach, &dw2104_config,
&d->dev->i2c_adap);
- if (d->fe != NULL) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ if (d->fe_adap[0].fe != NULL) {
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached cx24116!\n");
return 0;
}
}
- d->fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
+ d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
&d->dev->i2c_adap);
- if (d->fe != NULL) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ if (d->fe_adap[0].fe != NULL) {
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached DS3000!\n");
return 0;
}
@@ -1053,22 +1053,22 @@
{
if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) {
/*dw2102_properties.adapter->tuner_attach = NULL;*/
- d->fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config,
+ d->fe_adap[0].fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config,
&d->dev->i2c_adap);
- if (d->fe != NULL) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ if (d->fe_adap[0].fe != NULL) {
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached si21xx!\n");
return 0;
}
}
if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) {
- d->fe = dvb_attach(stv0288_attach, &earda_config,
+ d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config,
&d->dev->i2c_adap);
- if (d->fe != NULL) {
- if (dvb_attach(stb6000_attach, d->fe, 0x61,
+ if (d->fe_adap[0].fe != NULL) {
+ if (dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61,
&d->dev->i2c_adap)) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached stv0288!\n");
return 0;
}
@@ -1077,10 +1077,10 @@
if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) {
/*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
- d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
+ d->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
&d->dev->i2c_adap);
- if (d->fe != NULL) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ if (d->fe_adap[0].fe != NULL) {
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached stv0299!\n");
return 0;
}
@@ -1090,9 +1090,9 @@
static int dw3101_frontend_attach(struct dvb_usb_adapter *d)
{
- d->fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config,
+ d->fe_adap[0].fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config,
&d->dev->i2c_adap, 0x48);
- if (d->fe != NULL) {
+ if (d->fe_adap[0].fe != NULL) {
info("Attached tda10023!\n");
return 0;
}
@@ -1101,12 +1101,12 @@
static int zl100313_frontend_attach(struct dvb_usb_adapter *d)
{
- d->fe = dvb_attach(mt312_attach, &zl313_config,
+ d->fe_adap[0].fe = dvb_attach(mt312_attach, &zl313_config,
&d->dev->i2c_adap);
- if (d->fe != NULL) {
- if (dvb_attach(zl10039_attach, d->fe, 0x60,
+ if (d->fe_adap[0].fe != NULL) {
+ if (dvb_attach(zl10039_attach, d->fe_adap[0].fe, 0x60,
&d->dev->i2c_adap)) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
info("Attached zl100313+zl10039!\n");
return 0;
}
@@ -1119,16 +1119,16 @@
{
u8 obuf[] = {7, 1};
- d->fe = dvb_attach(stv0288_attach, &earda_config,
+ d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config,
&d->dev->i2c_adap);
- if (d->fe == NULL)
+ if (d->fe_adap[0].fe == NULL)
return -EIO;
- if (NULL == dvb_attach(stb6000_attach, d->fe, 0x61, &d->dev->i2c_adap))
+ if (NULL == dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, &d->dev->i2c_adap))
return -EIO;
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG);
@@ -1143,14 +1143,14 @@
struct s6x0_state *st = (struct s6x0_state *)d->dev->priv;
u8 obuf[] = {7, 1};
- d->fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
+ d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
&d->dev->i2c_adap);
- if (d->fe == NULL)
+ if (d->fe_adap[0].fe == NULL)
return -EIO;
- st->old_set_voltage = d->fe->ops.set_voltage;
- d->fe->ops.set_voltage = s660_set_voltage;
+ st->old_set_voltage = d->fe_adap[0].fe->ops.set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage = s660_set_voltage;
dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG);
@@ -1163,12 +1163,12 @@
{
u8 obuf[] = {7, 1};
- d->fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config,
+ d->fe_adap[0].fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config,
&d->dev->i2c_adap, 0);
- if (d->fe == NULL)
+ if (d->fe_adap[0].fe == NULL)
return -EIO;
- d->fe->ops.set_voltage = dw210x_set_voltage;
+ d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage;
dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG);
@@ -1204,9 +1204,9 @@
if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
err("command 0x51 transfer failed.");
- d->fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
+ d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
&d->dev->i2c_adap);
- if (d->fe == NULL)
+ if (d->fe_adap[0].fe == NULL)
return -EIO;
info("Attached DS3000!\n");
@@ -1216,14 +1216,14 @@
static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60,
&adap->dev->i2c_adap, DVB_PLL_OPERA1);
return 0;
}
static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60,
&adap->dev->i2c_adap, DVB_PLL_TUA6034);
return 0;
@@ -1535,7 +1535,7 @@
DW210X_READ_MSG);
if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) {
dw2102_properties.i2c_algo = &dw2102_i2c_algo;
- dw2102_properties.adapter->tuner_attach = &dw2102_tuner_attach;
+ dw2102_properties.adapter->fe[0].tuner_attach = &dw2102_tuner_attach;
break;
} else {
/* check STV0288 frontend */
@@ -1591,6 +1591,8 @@
.read_mac_address = dw210x_read_mac_address,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = dw2102_frontend_attach,
.stream = {
.type = USB_BULK,
@@ -1602,6 +1604,7 @@
}
}
},
+ }},
}
},
.num_device_descs = 3,
@@ -1642,6 +1645,8 @@
.read_mac_address = dw210x_read_mac_address,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = dw2104_frontend_attach,
.stream = {
.type = USB_BULK,
@@ -1653,6 +1658,7 @@
}
}
},
+ }},
}
},
.num_device_descs = 2,
@@ -1689,6 +1695,8 @@
.read_mac_address = dw210x_read_mac_address,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = dw3101_frontend_attach,
.tuner_attach = dw3101_tuner_attach,
.stream = {
@@ -1701,6 +1709,7 @@
}
}
},
+ }},
}
},
.num_device_descs = 1,
@@ -1733,6 +1742,8 @@
.read_mac_address = s6x0_read_mac_address,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = zl100313_frontend_attach,
.stream = {
.type = USB_BULK,
@@ -1744,6 +1755,7 @@
}
}
},
+ }},
}
},
.num_device_descs = 1,
@@ -1810,6 +1822,8 @@
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = su3000_streaming_ctrl,
.frontend_attach = su3000_frontend_attach,
.stream = {
@@ -1822,6 +1836,7 @@
}
}
}
+ }},
}
},
.num_device_descs = 3,
@@ -1855,7 +1870,7 @@
p1100->devices[0] = d1100;
p1100->rc.legacy.rc_map_table = rc_map_tbs_table;
p1100->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table);
- p1100->adapter->frontend_attach = stv0288_frontend_attach;
+ p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach;
s660 = kzalloc(sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
if (!s660) {
@@ -1869,7 +1884,7 @@
s660->devices[0] = d660;
s660->devices[1] = d480_1;
s660->devices[2] = d480_2;
- s660->adapter->frontend_attach = ds3000_frontend_attach;
+ s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach;
p7500 = kzalloc(sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
if (!p7500) {
@@ -1883,7 +1898,7 @@
p7500->devices[0] = d7500;
p7500->rc.legacy.rc_map_table = rc_map_tbs_table;
p7500->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table);
- p7500->adapter->frontend_attach = prof_7500_frontend_attach;
+ p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach;
if (0 == dvb_usb_device_init(intf, &dw2102_properties,
THIS_MODULE, NULL, adapter_nr) ||
diff --git a/drivers/media/dvb/dvb-usb/ec168.c b/drivers/media/dvb/dvb-usb/ec168.c
index 1ba3e5d..78442fe 100644
--- a/drivers/media/dvb/dvb-usb/ec168.c
+++ b/drivers/media/dvb/dvb-usb/ec168.c
@@ -200,9 +200,9 @@
static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
{
deb_info("%s:\n", __func__);
- adap->fe = dvb_attach(ec100_attach, &ec168_ec100_config,
+ adap->fe_adap[0].fe = dvb_attach(ec100_attach, &ec168_ec100_config,
&adap->dev->i2c_adap);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -ENODEV;
return 0;
@@ -228,7 +228,7 @@
static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
{
deb_info("%s:\n", __func__);
- return dvb_attach(mxl5005s_attach, adap->fe, &adap->dev->i2c_adap,
+ return dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
}
@@ -382,6 +382,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = ec168_streaming_ctrl,
.frontend_attach = ec168_ec100_frontend_attach,
.tuner_attach = ec168_mxl5003s_tuner_attach,
@@ -395,6 +397,7 @@
}
}
},
+ }},
}
},
diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c
index 76159ae..b092dc2 100644
--- a/drivers/media/dvb/dvb-usb/friio.c
+++ b/drivers/media/dvb/dvb-usb/friio.c
@@ -403,8 +403,8 @@
if (friio_initialize(adap->dev) < 0)
return -EIO;
- adap->fe = jdvbt90502_attach(adap->dev);
- if (adap->fe == NULL)
+ adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev);
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
return 0;
@@ -473,6 +473,8 @@
/* caps:0 => no pid filter, 188B TS packet */
/* GL861 has a HW pid filter, but no info available. */
{
+ .num_frontends = 1,
+ .fe = {{
.caps = 0,
.frontend_attach = friio_frontend_attach,
@@ -490,6 +492,7 @@
}
}
},
+ }},
}
},
.i2c_algo = &gl861_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c
index 6f596ed..63681df 100644
--- a/drivers/media/dvb/dvb-usb/gl861.c
+++ b/drivers/media/dvb/dvb-usb/gl861.c
@@ -103,9 +103,9 @@
static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
{
- adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
+ adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
&adap->dev->i2c_adap);
- if (adap->fe == NULL)
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
return 0;
@@ -118,7 +118,7 @@
static int gl861_tuner_attach(struct dvb_usb_adapter *adap)
{
return dvb_attach(qt1010_attach,
- adap->fe, &adap->dev->i2c_adap,
+ adap->fe_adap[0].fe, &adap->dev->i2c_adap,
&gl861_qt1010_config) == NULL ? -ENODEV : 0;
}
@@ -167,6 +167,8 @@
.num_adapters = 1,
.adapter = {{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = gl861_frontend_attach,
.tuner_attach = gl861_tuner_attach,
@@ -181,6 +183,7 @@
}
}
},
+ }},
} },
.i2c_algo = &gl861_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
index 60d11e5..54262679 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
@@ -144,19 +144,25 @@
cmd[6] = (freq >> 16) & 0xff;
cmd[7] = (freq >> 24) & 0xff;
+ /* backwards compatibility: DVB-S + 8-PSK were used for Turbo-FEC */
+ if (c->delivery_system == SYS_DVBS && c->modulation == PSK_8)
+ c->delivery_system = SYS_TURBO;
+
switch (c->delivery_system) {
case SYS_DVBS:
- /* Allow QPSK and 8PSK (even for DVB-S) */
- if (c->modulation != QPSK && c->modulation != PSK_8) {
+ if (c->modulation != QPSK) {
deb_fe("%s: unsupported modulation selected (%d)\n",
__func__, c->modulation);
return -EOPNOTSUPP;
}
c->fec_inner = FEC_AUTO;
break;
- case SYS_DVBS2:
+ case SYS_DVBS2: /* kept for backwards compatibility */
deb_fe("%s: DVB-S2 delivery system selected\n", __func__);
break;
+ case SYS_TURBO:
+ deb_fe("%s: Turbo-FEC delivery system selected\n", __func__);
+ break;
default:
deb_fe("%s: unsupported delivery system selected (%d)\n",
@@ -189,7 +195,10 @@
default:
cmd[9] = 5; break;
}
- cmd[8] = ADV_MOD_DVB_QPSK;
+ if (c->delivery_system == SYS_TURBO)
+ cmd[8] = ADV_MOD_TURBO_QPSK;
+ else
+ cmd[8] = ADV_MOD_DVB_QPSK;
break;
case PSK_8: /* PSK_8 is for compatibility with DN */
cmd[8] = ADV_MOD_TURBO_8PSK;
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index 1cb3d9a..5f71284 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -230,7 +230,7 @@
static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap)
{
- adap->fe = gp8psk_fe_attach(adap->dev);
+ adap->fe_adap[0].fe = gp8psk_fe_attach(adap->dev);
return 0;
}
@@ -268,6 +268,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = gp8psk_streaming_ctrl,
.frontend_attach = gp8psk_frontend_attach,
/* parameter for the MPEG2-data transfer */
@@ -281,6 +283,7 @@
}
}
},
+ }},
}
},
.power_ctrl = gp8psk_power_ctrl,
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
new file mode 100644
index 0000000..f027a2c
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -0,0 +1,651 @@
+/* DVB USB compliant linux driver for IT9137
+ *
+ * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com)
+ * IT9137 (C) ITE Tech Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/dvb/it9137.txt for firmware information
+ *
+ */
+#define DVB_USB_LOG_PREFIX "it913x"
+
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/rc-core.h>
+
+#include "dvb-usb.h"
+#include "it913x-fe.h"
+
+/* debug */
+static int dvb_usb_it913x_debug;
+#define l_dprintk(var, level, args...) do { \
+ if ((var >= level)) \
+ printk(KERN_DEBUG DVB_USB_LOG_PREFIX ": " args); \
+} while (0)
+
+#define deb_info(level, args...) l_dprintk(dvb_usb_it913x_debug, level, args)
+#define debug_data_snipet(level, name, p) \
+ deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
+ *p, *(p+1), *(p+2), *(p+3), *(p+4), \
+ *(p+5), *(p+6), *(p+7));
+
+
+module_param_named(debug, dvb_usb_it913x_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."
+ DVB_USB_DEBUG_STATUS);
+
+static int pid_filter;
+module_param_named(pid, pid_filter, int, 0644);
+MODULE_PARM_DESC(pid, "set default 0=on 1=off");
+
+int cmd_counter;
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct it913x_state {
+ u8 id;
+};
+
+static int it913x_bulk_write(struct usb_device *dev,
+ u8 *snd, int len, u8 pipe)
+{
+ int ret, actual_l;
+
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
+ snd, len , &actual_l, 100);
+ return ret;
+}
+
+static int it913x_bulk_read(struct usb_device *dev,
+ u8 *rev, int len, u8 pipe)
+{
+ int ret, actual_l;
+
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
+ rev, len , &actual_l, 200);
+ return ret;
+}
+
+static u16 check_sum(u8 *p, u8 len)
+{
+ u16 sum = 0;
+ u8 i = 1;
+ while (i < len)
+ sum += (i++ & 1) ? (*p++) << 8 : *p++;
+ return ~sum;
+}
+
+static int it913x_io(struct usb_device *udev, u8 mode, u8 pro,
+ u8 cmd, u32 reg, u8 addr, u8 *data, u8 len)
+{
+ int ret = 0, i, buf_size = 1;
+ u8 *buff;
+ u8 rlen;
+ u16 chk_sum;
+
+ buff = kzalloc(256, GFP_KERNEL);
+ if (!buff) {
+ info("USB Buffer Failed");
+ return -ENOMEM;
+ }
+
+ buff[buf_size++] = pro;
+ buff[buf_size++] = cmd;
+ buff[buf_size++] = cmd_counter;
+
+ switch (mode) {
+ case READ_LONG:
+ case WRITE_LONG:
+ buff[buf_size++] = len;
+ buff[buf_size++] = 2;
+ buff[buf_size++] = (reg >> 24);
+ buff[buf_size++] = (reg >> 16) & 0xff;
+ buff[buf_size++] = (reg >> 8) & 0xff;
+ buff[buf_size++] = reg & 0xff;
+ break;
+ case READ_SHORT:
+ buff[buf_size++] = addr;
+ break;
+ case WRITE_SHORT:
+ buff[buf_size++] = len;
+ buff[buf_size++] = addr;
+ buff[buf_size++] = (reg >> 8) & 0xff;
+ buff[buf_size++] = reg & 0xff;
+ break;
+ case READ_DATA:
+ case WRITE_DATA:
+ break;
+ case WRITE_CMD:
+ mode = 7;
+ break;
+ default:
+ kfree(buff);
+ return -EINVAL;
+ }
+
+ if (mode & 1) {
+ for (i = 0; i < len ; i++)
+ buff[buf_size++] = data[i];
+ }
+ chk_sum = check_sum(&buff[1], buf_size);
+
+ buff[buf_size++] = chk_sum >> 8;
+ buff[0] = buf_size;
+ buff[buf_size++] = (chk_sum & 0xff);
+
+ ret = it913x_bulk_write(udev, buff, buf_size , 0x02);
+
+ ret |= it913x_bulk_read(udev, buff, (mode & 1) ?
+ 5 : len + 5 , 0x01);
+
+ rlen = (mode & 0x1) ? 0x1 : len;
+
+ if (mode & 1)
+ ret |= buff[2];
+ else
+ memcpy(data, &buff[3], rlen);
+
+ cmd_counter++;
+
+ kfree(buff);
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int it913x_wr_reg(struct usb_device *udev, u8 pro, u32 reg , u8 data)
+{
+ int ret;
+ u8 b[1];
+ b[0] = data;
+ ret = it913x_io(udev, WRITE_LONG, pro,
+ CMD_DEMOD_WRITE, reg, 0, b, sizeof(b));
+
+ return ret;
+}
+
+static int it913x_read_reg(struct usb_device *udev, u32 reg)
+{
+ int ret;
+ u8 data[1];
+
+ ret = it913x_io(udev, READ_LONG, DEV_0,
+ CMD_DEMOD_READ, reg, 0, &data[0], 1);
+
+ return (ret < 0) ? ret : data[0];
+}
+
+static u32 it913x_query(struct usb_device *udev, u8 pro)
+{
+ int ret;
+ u32 res = 0;
+ u8 data[4];
+ ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
+ 0x1222, 0, &data[0], 1);
+ if (data[0] == 0x1) {
+ ret = it913x_io(udev, READ_SHORT, pro,
+ CMD_QUERYINFO, 0, 0x1, &data[0], 4);
+ res = (data[0] << 24) + (data[1] << 16) +
+ (data[2] << 8) + data[3];
+ }
+
+ return (ret < 0) ? 0 : res;
+}
+
+static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret = 0;
+ u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
+
+ if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
+ return -EAGAIN;
+ deb_info(1, "PID_C (%02x)", onoff);
+
+ if (!onoff)
+ ret = it913x_wr_reg(adap->dev->udev, pro, PID_RST, 0x1);
+
+ mutex_unlock(&adap->dev->i2c_mutex);
+ return ret;
+}
+
+static int it913x_pid_filter(struct dvb_usb_adapter *adap,
+ int index, u16 pid, int onoff)
+{
+ struct usb_device *udev = adap->dev->udev;
+ int ret = 0;
+ u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
+
+ if (pid_filter > 0)
+ return 0;
+
+ if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
+ return -EAGAIN;
+ deb_info(1, "PID_F (%02x)", onoff);
+ if (onoff) {
+ ret = it913x_wr_reg(udev, pro, PID_EN, 0x1);
+
+ ret |= it913x_wr_reg(udev, pro, PID_LSB, (u8)(pid & 0xff));
+
+ ret |= it913x_wr_reg(udev, pro, PID_MSB, (u8)(pid >> 8));
+
+ ret |= it913x_wr_reg(udev, pro, PID_INX_EN, (u8)onoff);
+
+ ret |= it913x_wr_reg(udev, pro, PID_INX, (u8)(index & 0x1f));
+
+ }
+
+ mutex_unlock(&adap->dev->i2c_mutex);
+ return 0;
+}
+
+
+static int it913x_return_status(struct usb_device *udev)
+{
+ u32 firm = 0;
+
+ firm = it913x_query(udev, DEV_0);
+ if (firm > 0)
+ info("Firmware Version %d", firm);
+
+ return (firm > 0) ? firm : 0;
+}
+
+static int it913x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ static u8 data[256];
+ int ret;
+ u32 reg;
+ u8 pro;
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ debug_data_snipet(1, "Message out", msg[0].buf);
+ deb_info(2, "num of messages %d address %02x", num, msg[0].addr);
+
+ pro = (msg[0].addr & 0x2) ? DEV_0_DMOD : 0x0;
+ pro |= (msg[0].addr & 0x20) ? DEV_1 : DEV_0;
+ memcpy(data, msg[0].buf, msg[0].len);
+ reg = (data[0] << 24) + (data[1] << 16) +
+ (data[2] << 8) + data[3];
+ if (num == 2) {
+ ret = it913x_io(d->udev, READ_LONG, pro,
+ CMD_DEMOD_READ, reg, 0, data, msg[1].len);
+ memcpy(msg[1].buf, data, msg[1].len);
+ } else
+ ret = it913x_io(d->udev, WRITE_LONG, pro, CMD_DEMOD_WRITE,
+ reg, 0, &data[4], msg[0].len - 4);
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return ret;
+}
+
+static u32 it913x_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm it913x_i2c_algo = {
+ .master_xfer = it913x_i2c_xfer,
+ .functionality = it913x_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+#define IT913X_POLL 250
+static int it913x_rc_query(struct dvb_usb_device *d)
+{
+ u8 ibuf[4];
+ int ret;
+ u32 key;
+ /* Avoid conflict with frontends*/
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ ret = it913x_io(d->udev, READ_LONG, PRO_LINK, CMD_IR_GET,
+ 0, 0, &ibuf[0], sizeof(ibuf));
+
+ if ((ibuf[2] + ibuf[3]) == 0xff) {
+ key = ibuf[2];
+ key += ibuf[0] << 8;
+ deb_info(1, "INT Key =%08x", key);
+ if (d->rc_dev != NULL)
+ rc_keydown(d->rc_dev, key, 0);
+ }
+ mutex_unlock(&d->i2c_mutex);
+
+ return ret;
+}
+static int it913x_identify_state(struct usb_device *udev,
+ struct dvb_usb_device_properties *props,
+ struct dvb_usb_device_description **desc,
+ int *cold)
+{
+ int ret = 0, firm_no;
+ u8 reg, adap, ep, tun0, tun1;
+
+ firm_no = it913x_return_status(udev);
+
+ ep = it913x_read_reg(udev, 0x49ac);
+ adap = it913x_read_reg(udev, 0x49c5);
+ tun0 = it913x_read_reg(udev, 0x49d0);
+ info("No. Adapters=%x Endpoints=%x Tuner Type=%x", adap, ep, tun0);
+
+ if (firm_no > 0) {
+ *cold = 0;
+ return 0;
+ }
+
+ if (adap > 2) {
+ tun1 = it913x_read_reg(udev, 0x49e0);
+ ret = it913x_wr_reg(udev, DEV_0, GPIOH1_EN, 0x1);
+ ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_ON, 0x1);
+ ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x1);
+ msleep(50); /* Delay noticed reset cycle ? */
+ ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x0);
+ msleep(50);
+ reg = it913x_read_reg(udev, GPIOH1_O);
+ if (reg == 0) {
+ ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x1);
+ ret |= it913x_return_status(udev);
+ if (ret != 0)
+ ret = it913x_wr_reg(udev, DEV_0,
+ GPIOH1_O, 0x0);
+ }
+ } else
+ props->num_adapters = 1;
+
+ reg = it913x_read_reg(udev, IO_MUX_POWER_CLK);
+
+ ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
+
+ ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x1);
+
+ *cold = 1;
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int it913x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret = 0;
+ u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD;
+
+ if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
+ return -EAGAIN;
+ deb_info(1, "STM (%02x)", onoff);
+
+ if (!onoff)
+ ret = it913x_wr_reg(adap->dev->udev, pro, PID_RST, 0x1);
+
+
+ mutex_unlock(&adap->dev->i2c_mutex);
+
+ return ret;
+}
+
+
+static int it913x_download_firmware(struct usb_device *udev,
+ const struct firmware *fw)
+{
+ int ret = 0, i;
+ u8 packet_size, dlen, tun1;
+ u8 *fw_data;
+
+ packet_size = 0x29;
+
+ tun1 = it913x_read_reg(udev, 0x49e0);
+
+ ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_100);
+
+ info("FRM Starting Firmware Download");
+ /* This uses scatter write firmware headers follow */
+ /* 03 XX 00 XX = chip number? */
+
+ for (i = 0; i < fw->size; i += packet_size) {
+ if (i > 0)
+ packet_size = 0x39;
+ fw_data = (u8 *)(fw->data + i);
+ dlen = ((i + packet_size) > fw->size)
+ ? (fw->size - i) : packet_size;
+ ret |= it913x_io(udev, WRITE_DATA, DEV_0,
+ CMD_SCATTER_WRITE, 0, 0, fw_data, dlen);
+ udelay(1000);
+ }
+
+ ret |= it913x_io(udev, WRITE_CMD, DEV_0,
+ CMD_BOOT, 0, 0, NULL, 0);
+
+ msleep(100);
+
+ if (ret < 0)
+ info("FRM Firmware Download Failed (%04x)" , ret);
+ else
+ info("FRM Firmware Download Completed - Resetting Device");
+
+ ret |= it913x_return_status(udev);
+
+ msleep(30);
+
+ ret |= it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400);
+
+ /* Tuner function */
+ ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
+
+ ret |= it913x_wr_reg(udev, DEV_0, PADODPU, 0x0);
+ ret |= it913x_wr_reg(udev, DEV_0, AGC_O_D, 0x0);
+ if (tun1 > 0) {
+ ret |= it913x_wr_reg(udev, DEV_1, PADODPU, 0x0);
+ ret |= it913x_wr_reg(udev, DEV_1, AGC_O_D, 0x0);
+ }
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int it913x_name(struct dvb_usb_adapter *adap)
+{
+ const char *desc = adap->dev->desc->name;
+ char *fe_name[] = {"_1", "_2", "_3", "_4"};
+ char *name = adap->fe_adap[0].fe->ops.info.name;
+
+ strlcpy(name, desc, 128);
+ strlcat(name, fe_name[adap->id], 128);
+
+ return 0;
+}
+
+static int it913x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct usb_device *udev = adap->dev->udev;
+ int ret = 0;
+ u8 adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
+ u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5);
+ u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize;
+
+ adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach,
+ &adap->dev->i2c_adap, adap_addr, adf, IT9137);
+
+ if (adap->id == 0 && adap->fe_adap[0].fe) {
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1);
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_SW_RST, 0x1);
+ ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x0f);
+ ret = it913x_wr_reg(udev, DEV_0, EP0_TX_NAK, 0x1b);
+ ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x2f);
+ ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_LSB,
+ ep_size & 0xff);
+ ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_MSB, ep_size >> 8);
+ ret = it913x_wr_reg(udev, DEV_0, EP4_MAX_PKT, 0x80);
+ } else if (adap->id == 1 && adap->fe_adap[0].fe) {
+ ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x6f);
+ ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_LSB,
+ ep_size & 0xff);
+ ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_MSB, ep_size >> 8);
+ ret = it913x_wr_reg(udev, DEV_0, EP5_MAX_PKT, 0x80);
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_EN, 0x1);
+ ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_SERIAL, 0x1);
+ ret = it913x_wr_reg(udev, DEV_1, TOP_HOSTB_SER_MODE, 0x1);
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, TSIS_ENABLE, 0x1);
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x0);
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_SW_RST, 0x0);
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_HALF_PSB, 0x0);
+ ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF_STOP_EN, 0x1);
+ ret = it913x_wr_reg(udev, DEV_1_DMOD, MPEG_FULL_SPEED, 0x0);
+ ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_STOP_EN, 0x0);
+ } else
+ return -ENODEV;
+
+ ret = it913x_name(adap);
+
+ return ret;
+}
+
+/* DVB USB Driver */
+static struct dvb_usb_device_properties it913x_properties;
+
+static int it913x_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ cmd_counter = 0;
+ if (0 == dvb_usb_device_init(intf, &it913x_properties,
+ THIS_MODULE, NULL, adapter_nr)) {
+ info("DEV registering device driver");
+ return 0;
+ }
+
+ info("DEV it913x Error");
+ return -ENODEV;
+
+}
+
+static struct usb_device_id it913x_table[] = {
+ { USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09) },
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, it913x_table);
+
+static struct dvb_usb_device_properties it913x_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .download_firmware = it913x_download_firmware,
+ .firmware = "dvb-usb-it9137-01.fw",
+ .no_reconnect = 1,
+ .size_of_priv = sizeof(struct it913x_state),
+ .num_adapters = 2,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER|
+ DVB_USB_ADAP_NEED_PID_FILTERING|
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .streaming_ctrl = it913x_streaming_ctrl,
+ .pid_filter_count = 31,
+ .pid_filter = it913x_pid_filter,
+ .pid_filter_ctrl = it913x_pid_filter_ctrl,
+ .frontend_attach = it913x_frontend_attach,
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 10,
+ .endpoint = 0x04,
+ .u = {/* Keep Low if PID filter on */
+ .bulk = {
+ .buffersize = 3584,
+
+ }
+ }
+ }
+ }},
+ },
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER|
+ DVB_USB_ADAP_NEED_PID_FILTERING|
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .streaming_ctrl = it913x_streaming_ctrl,
+ .pid_filter_count = 31,
+ .pid_filter = it913x_pid_filter,
+ .pid_filter_ctrl = it913x_pid_filter_ctrl,
+ .frontend_attach = it913x_frontend_attach,
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 5,
+ .endpoint = 0x05,
+ .u = {
+ .bulk = {
+ .buffersize = 3584,
+
+ }
+ }
+ }
+ }},
+ }
+ },
+ .identify_state = it913x_identify_state,
+ .rc.core = {
+ .protocol = RC_TYPE_NEC,
+ .module_name = "it913x",
+ .rc_query = it913x_rc_query,
+ .rc_interval = IT913X_POLL,
+ .allowed_protos = RC_TYPE_NEC,
+ .rc_codes = RC_MAP_KWORLD_315U,
+ },
+ .i2c_algo = &it913x_i2c_algo,
+ .num_device_descs = 1,
+ .devices = {
+ { "Kworld UB499-2T T09(IT9137)",
+ { &it913x_table[0], NULL },
+ },
+
+ }
+};
+
+static struct usb_driver it913x_driver = {
+ .name = "it913x",
+ .probe = it913x_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = it913x_table,
+};
+
+/* module stuff */
+static int __init it913x_module_init(void)
+{
+ int result = usb_register(&it913x_driver);
+ if (result) {
+ err("usb_register failed. Error number %d", result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit it913x_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&it913x_driver);
+}
+
+module_init(it913x_module_init);
+module_exit(it913x_module_exit);
+
+MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
+MODULE_DESCRIPTION("it913x USB 2 Driver");
+MODULE_VERSION("1.06");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index 37b1469..b922824 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -162,7 +162,7 @@
int ret = 0;
if (st->usb_buffer == NULL) {
- st->usb_buffer = kmalloc(512, GFP_KERNEL);
+ st->usb_buffer = kmalloc(64, GFP_KERNEL);
if (st->usb_buffer == NULL) {
info("MEM Error no memory");
return -ENOMEM;
@@ -175,8 +175,8 @@
if (ret < 0)
return -EAGAIN;
- /* the read/write capped at 512 */
- memcpy(buff, wbuf, (wlen > 512) ? 512 : wlen);
+ /* the read/write capped at 64 */
+ memcpy(buff, wbuf, (wlen < 64) ? wlen : 64);
ret |= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01));
@@ -186,8 +186,8 @@
ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01));
- ret |= lme2510_bulk_read(d->udev, buff, (rlen > 512) ?
- 512 : rlen , 0x01);
+ ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ?
+ rlen : 64 , 0x01);
if (rlen > 0)
memcpy(rbuf, buff, rlen);
@@ -333,7 +333,7 @@
if (lme_int->lme_urb == NULL)
return -ENOMEM;
- lme_int->buffer = usb_alloc_coherent(adap->dev->udev, 5000, GFP_ATOMIC,
+ lme_int->buffer = usb_alloc_coherent(adap->dev->udev, 128, GFP_ATOMIC,
&lme_int->lme_urb->transfer_dma);
if (lme_int->buffer == NULL)
@@ -343,10 +343,10 @@
adap->dev->udev,
usb_rcvintpipe(adap->dev->udev, 0xa),
lme_int->buffer,
- 4096,
+ 128,
lme2510_int_response,
adap,
- 11);
+ 8);
lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -580,7 +580,7 @@
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
struct lme2510_state *st = d->priv;
- static u8 obuf[64], ibuf[512];
+ static u8 obuf[64], ibuf[64];
int i, read, read_o;
u16 len;
u8 gate = st->i2c_gate;
@@ -621,7 +621,7 @@
len = msg[i].len+3;
}
- if (lme2510_msg(d, obuf, len, ibuf, 512) < 0) {
+ if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) {
deb_info(1, "i2c transfer failed.");
return -EAGAIN;
}
@@ -941,7 +941,7 @@
const char *desc = adap->dev->desc->name;
char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395",
" SHARP:BS2F7HZ0194"};
- char *name = adap->fe->ops.info.name;
+ char *name = adap->fe_adap[0].fe->ops.info.name;
strlcpy(name, desc, 128);
strlcat(name, fe_name[st->tuner_config], 128);
@@ -958,10 +958,10 @@
st->i2c_talk_onoff = 1;
st->i2c_gate = 4;
- adap->fe = dvb_attach(tda10086_attach, &tda10086_config,
+ adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config,
&adap->dev->i2c_adap);
- if (adap->fe) {
+ if (adap->fe_adap[0].fe) {
info("TUN Found Frontend TDA10086");
st->i2c_tuner_gate_w = 4;
st->i2c_tuner_gate_r = 4;
@@ -975,9 +975,9 @@
}
st->i2c_gate = 4;
- adap->fe = dvb_attach(stv0299_attach, &sharp_z0194_config,
+ adap->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194_config,
&adap->dev->i2c_adap);
- if (adap->fe) {
+ if (adap->fe_adap[0].fe) {
info("FE Found Stv0299");
st->i2c_tuner_gate_w = 4;
st->i2c_tuner_gate_r = 5;
@@ -991,9 +991,9 @@
}
st->i2c_gate = 5;
- adap->fe = dvb_attach(stv0288_attach, &lme_config,
+ adap->fe_adap[0].fe = dvb_attach(stv0288_attach, &lme_config,
&adap->dev->i2c_adap);
- if (adap->fe) {
+ if (adap->fe_adap[0].fe) {
info("FE Found Stv0288");
st->i2c_tuner_gate_w = 4;
st->i2c_tuner_gate_r = 5;
@@ -1010,15 +1010,15 @@
end: if (ret) {
- if (adap->fe) {
- dvb_frontend_detach(adap->fe);
- adap->fe = NULL;
+ if (adap->fe_adap[0].fe) {
+ dvb_frontend_detach(adap->fe_adap[0].fe);
+ adap->fe_adap[0].fe = NULL;
}
adap->dev->props.rc.core.rc_codes = NULL;
return -ENODEV;
}
- adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
+ adap->fe_adap[0].fe->ops.set_voltage = dm04_lme2510_set_voltage;
ret = lme_name(adap);
return ret;
}
@@ -1031,17 +1031,17 @@
switch (st->tuner_config) {
case TUNER_LG:
- if (dvb_attach(tda826x_attach, adap->fe, 0xc0,
+ if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0xc0,
&adap->dev->i2c_adap, 1))
ret = st->tuner_config;
break;
case TUNER_S7395:
- if (dvb_attach(ix2505v_attach , adap->fe, &lme_tuner,
+ if (dvb_attach(ix2505v_attach , adap->fe_adap[0].fe, &lme_tuner,
&adap->dev->i2c_adap))
ret = st->tuner_config;
break;
case TUNER_S0194:
- if (dvb_attach(dvb_pll_attach , adap->fe, 0xc0,
+ if (dvb_attach(dvb_pll_attach , adap->fe_adap[0].fe, 0xc0,
&adap->dev->i2c_adap, DVB_PLL_OPERA1))
ret = st->tuner_config;
break;
@@ -1145,6 +1145,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER|
DVB_USB_ADAP_NEED_PID_FILTERING|
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -1166,6 +1168,7 @@
}
}
}
+ }},
}
},
.rc.core = {
@@ -1193,6 +1196,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER|
DVB_USB_ADAP_NEED_PID_FILTERING|
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -1214,6 +1219,7 @@
}
}
}
+ }},
}
},
.rc.core = {
@@ -1241,7 +1247,7 @@
void *buffer = NULL;
if (adap != NULL) {
- lme2510_kill_urb(&adap->stream);
+ lme2510_kill_urb(&adap->fe_adap[0].stream);
adap->feedcount = 0;
}
@@ -1255,7 +1261,7 @@
if (st->lme_urb != NULL) {
usb_kill_urb(st->lme_urb);
- usb_free_coherent(d->udev, 5000, st->buffer,
+ usb_free_coherent(d->udev, 128, st->buffer,
st->lme_urb->transfer_dma);
info("Interrupt Service Stopped");
}
@@ -1306,5 +1312,5 @@
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.88");
+MODULE_VERSION("1.90");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index 9456792..a1e1287 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -86,12 +86,12 @@
}
for (i = 0; i < d->props.num_adapters; i++)
- flags |= d->adapter[i].props.caps;
+ flags |= d->adapter[i].props.fe[0].caps;
/* Some devices(Dposh) might crash if we attempt touch at all. */
if (flags & DVB_USB_ADAP_HAS_PID_FILTER) {
for (i = 0; i < d->props.num_adapters; i++) {
- epi = d->adapter[i].props.stream.endpoint - 0x81;
+ epi = d->adapter[i].props.fe[0].stream.endpoint - 0x81;
if (epi < 0 || epi >= M9206_MAX_ADAPTERS) {
printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n");
@@ -292,7 +292,7 @@
struct m920x_state *m = adap->dev->priv;
int enabled = m->filtering_enabled[adap->id];
int i, ret = 0, filter = 0;
- int ep = adap->props.stream.endpoint;
+ int ep = adap->props.fe[0].stream.endpoint;
for (i = 0; i < M9206_MAX_FILTERS; i++)
if (m->filters[adap->id][i] == 8192)
@@ -501,9 +501,10 @@
{
deb("%s\n",__func__);
- if ((adap->fe = dvb_attach(mt352_attach,
- &m920x_mt352_config,
- &adap->dev->i2c_adap)) == NULL)
+ adap->fe_adap[0].fe = dvb_attach(mt352_attach,
+ &m920x_mt352_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) == NULL)
return -EIO;
return 0;
@@ -513,9 +514,10 @@
{
deb("%s\n",__func__);
- if ((adap->fe = dvb_attach(tda10046_attach,
- &m920x_tda10046_08_config,
- &adap->dev->i2c_adap)) == NULL)
+ adap->fe_adap[0].fe = dvb_attach(tda10046_attach,
+ &m920x_tda10046_08_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) == NULL)
return -EIO;
return 0;
@@ -525,9 +527,10 @@
{
deb("%s\n",__func__);
- if ((adap->fe = dvb_attach(tda10046_attach,
- &m920x_tda10046_0b_config,
- &adap->dev->i2c_adap)) == NULL)
+ adap->fe_adap[0].fe = dvb_attach(tda10046_attach,
+ &m920x_tda10046_0b_config,
+ &adap->dev->i2c_adap);
+ if ((adap->fe_adap[0].fe) == NULL)
return -EIO;
return 0;
@@ -537,7 +540,7 @@
{
deb("%s\n",__func__);
- if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
+ if (dvb_attach(qt1010_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
return -ENODEV;
return 0;
@@ -547,7 +550,7 @@
{
deb("%s\n",__func__);
- if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
+ if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
return -ENODEV;
return 0;
@@ -557,7 +560,7 @@
{
deb("%s\n",__func__);
- if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
+ if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
return -ENODEV;
return 0;
@@ -565,7 +568,7 @@
static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(simple_tuner_attach, adap->fe,
+ dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, 0x61,
TUNER_PHILIPS_FMD1216ME_MK3);
return 0;
@@ -807,6 +810,9 @@
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
+ .num_frontends = 1,
+ .fe = {{
+
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -827,6 +833,7 @@
}
}
},
+ }},
}},
.i2c_algo = &m920x_i2c_algo,
@@ -851,6 +858,9 @@
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
+ .num_frontends = 1,
+ .fe = {{
+
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -871,6 +881,7 @@
}
}
},
+ }},
}},
.i2c_algo = &m920x_i2c_algo,
@@ -910,6 +921,9 @@
.identify_state = m920x_identify_state,
.num_adapters = 2,
.adapter = {{
+ .num_frontends = 1,
+ .fe = {{
+
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -929,7 +943,11 @@
.buffersize = 512,
}
}
+ }},
}},{
+ .num_frontends = 1,
+ .fe = {{
+
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -949,6 +967,7 @@
.buffersize = 512,
}
}
+ }},
},
}},
.i2c_algo = &m920x_i2c_algo,
@@ -974,6 +993,8 @@
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
+ .num_frontends = 1,
+ .fe = {{
/* Hardware pid filters don't work with this device/firmware */
.frontend_attach = m920x_mt352_frontend_attach,
@@ -989,6 +1010,7 @@
}
}
},
+ }},
}},
.i2c_algo = &m920x_i2c_algo,
@@ -1019,6 +1041,9 @@
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
+ .num_frontends = 1,
+ .fe = {{
+
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -1041,6 +1066,7 @@
}
}
},
+ }},
} },
.i2c_algo = &m920x_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c
new file mode 100644
index 0000000..e4121cb
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c
@@ -0,0 +1,763 @@
+/*
+ * mxl111sf-gpio.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-gpio.h"
+#include "mxl111sf-i2c.h"
+#include "mxl111sf.h"
+
+/* ------------------------------------------------------------------------- */
+
+#define MXL_GPIO_MUX_REG_0 0x84
+#define MXL_GPIO_MUX_REG_1 0x89
+#define MXL_GPIO_MUX_REG_2 0x82
+
+#define MXL_GPIO_DIR_INPUT 0
+#define MXL_GPIO_DIR_OUTPUT 1
+
+
+static int mxl111sf_set_gpo_state(struct mxl111sf_state *state, u8 pin, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug_adv("(%d, %d)", pin, val);
+
+ if ((pin > 0) && (pin < 8)) {
+ ret = mxl111sf_read_reg(state, 0x19, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (pin - 1));
+ tmp |= (val << (pin - 1));
+ ret = mxl111sf_write_reg(state, 0x19, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ } else if (pin <= 10) {
+ if (pin == 0)
+ pin += 7;
+ ret = mxl111sf_read_reg(state, 0x30, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (pin - 3));
+ tmp |= (val << (pin - 3));
+ ret = mxl111sf_write_reg(state, 0x30, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ } else
+ ret = -EINVAL;
+fail:
+ return ret;
+}
+
+static int mxl111sf_get_gpi_state(struct mxl111sf_state *state, u8 pin, u8 *val)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug("(0x%02x)", pin);
+
+ *val = 0;
+
+ switch (pin) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ ret = mxl111sf_read_reg(state, 0x23, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> (pin + 4)) & 0x01;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ ret = mxl111sf_read_reg(state, 0x2f, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> pin) & 0x01;
+ break;
+ case 8:
+ case 9:
+ case 10:
+ ret = mxl111sf_read_reg(state, 0x22, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> (pin - 3)) & 0x01;
+ break;
+ default:
+ return -EINVAL; /* invalid pin */
+ }
+fail:
+ return ret;
+}
+
+struct mxl_gpio_cfg {
+ u8 pin;
+ u8 dir;
+ u8 val;
+};
+
+static int mxl111sf_config_gpio_pins(struct mxl111sf_state *state,
+ struct mxl_gpio_cfg *gpio_cfg)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug_adv("(%d, %d)", gpio_cfg->pin, gpio_cfg->dir);
+
+ switch (gpio_cfg->pin) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_0, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (gpio_cfg->pin + 4));
+ tmp |= (gpio_cfg->dir << (gpio_cfg->pin + 4));
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_0, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_1, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << gpio_cfg->pin);
+ tmp |= (gpio_cfg->dir << gpio_cfg->pin);
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_1, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ case 8:
+ case 9:
+ case 10:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_2, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (gpio_cfg->pin - 3));
+ tmp |= (gpio_cfg->dir << (gpio_cfg->pin - 3));
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_2, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ default:
+ return -EINVAL; /* invalid pin */
+ }
+
+ ret = (MXL_GPIO_DIR_OUTPUT == gpio_cfg->dir) ?
+ mxl111sf_set_gpo_state(state,
+ gpio_cfg->pin, gpio_cfg->val) :
+ mxl111sf_get_gpi_state(state,
+ gpio_cfg->pin, &gpio_cfg->val);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_hw_do_set_gpio(struct mxl111sf_state *state,
+ int gpio, int direction, int val)
+{
+ struct mxl_gpio_cfg gpio_config = {
+ .pin = gpio,
+ .dir = direction,
+ .val = val,
+ };
+
+ mxl_debug("(%d, %d, %d)", gpio, direction, val);
+
+ return mxl111sf_config_gpio_pins(state, &gpio_config);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define PIN_MUX_MPEG_MODE_MASK 0x40 /* 0x17 <6> */
+#define PIN_MUX_MPEG_PAR_EN_MASK 0x01 /* 0x18 <0> */
+#define PIN_MUX_MPEG_SER_EN_MASK 0x02 /* 0x18 <1> */
+#define PIN_MUX_MPG_IN_MUX_MASK 0x80 /* 0x3D <7> */
+#define PIN_MUX_BT656_ENABLE_MASK 0x04 /* 0x12 <2> */
+#define PIN_MUX_I2S_ENABLE_MASK 0x40 /* 0x15 <6> */
+#define PIN_MUX_SPI_MODE_MASK 0x10 /* 0x3D <4> */
+#define PIN_MUX_MCLK_EN_CTRL_MASK 0x10 /* 0x82 <4> */
+#define PIN_MUX_MPSYN_EN_CTRL_MASK 0x20 /* 0x82 <5> */
+#define PIN_MUX_MDVAL_EN_CTRL_MASK 0x40 /* 0x82 <6> */
+#define PIN_MUX_MPERR_EN_CTRL_MASK 0x80 /* 0x82 <7> */
+#define PIN_MUX_MDAT_EN_0_MASK 0x10 /* 0x84 <4> */
+#define PIN_MUX_MDAT_EN_1_MASK 0x20 /* 0x84 <5> */
+#define PIN_MUX_MDAT_EN_2_MASK 0x40 /* 0x84 <6> */
+#define PIN_MUX_MDAT_EN_3_MASK 0x80 /* 0x84 <7> */
+#define PIN_MUX_MDAT_EN_4_MASK 0x10 /* 0x89 <4> */
+#define PIN_MUX_MDAT_EN_5_MASK 0x20 /* 0x89 <5> */
+#define PIN_MUX_MDAT_EN_6_MASK 0x40 /* 0x89 <6> */
+#define PIN_MUX_MDAT_EN_7_MASK 0x80 /* 0x89 <7> */
+
+int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
+ enum mxl111sf_mux_config pin_mux_config)
+{
+ u8 r12, r15, r17, r18, r3D, r82, r84, r89;
+ int ret;
+
+ mxl_debug("(%d)", pin_mux_config);
+
+ ret = mxl111sf_read_reg(state, 0x17, &r17);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x18, &r18);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x12, &r12);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x15, &r15);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x82, &r82);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x84, &r84);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x89, &r89);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x3D, &r3D);
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch (pin_mux_config) {
+ case PIN_MUX_TS_OUT_PARALLEL:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 1 */
+ r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 1 */
+ r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 1 */
+ r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0xF */
+ r84 |= 0xF0;
+ /* mdat_en_ctrl[7:4] = 0xF */
+ r89 |= 0xF0;
+ break;
+ case PIN_MUX_TS_OUT_SERIAL:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 1 */
+ r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 1 */
+ r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0xF */
+ r84 |= 0xF0;
+ /* mdat_en_ctrl[7:4] = 0xF */
+ r89 |= 0xF0;
+ break;
+ case PIN_MUX_GPIO_MODE:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SERIAL_IN_MODE_0:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SERIAL_IN_MODE_1:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 1 */
+ r3D |= PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SPI_IN_MODE_1:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 1 */
+ r3D |= PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 1 */
+ r3D |= PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SPI_IN_MODE_0:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 1 */
+ r3D |= PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_PARALLEL_IN:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 1 */
+ r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_BT656_I2S_MODE:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 1 */
+ r12 |= PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_DEFAULT:
+ default:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ }
+
+ ret = mxl111sf_write_reg(state, 0x17, r17);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x18, r18);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x12, r12);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x15, r15);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x82, r82);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x84, r84);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x89, r89);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x3D, r3D);
+ if (mxl_fail(ret))
+ goto fail;
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl111sf_hw_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ return mxl111sf_hw_do_set_gpio(state, gpio, MXL_GPIO_DIR_OUTPUT, val);
+}
+
+static int mxl111sf_hw_gpio_initialize(struct mxl111sf_state *state)
+{
+ u8 gpioval = 0x07; /* write protect enabled, signal LEDs off */
+ int i, ret;
+
+ mxl_debug("()");
+
+ for (i = 3; i < 8; i++) {
+ ret = mxl111sf_hw_set_gpio(state, i, (gpioval >> i) & 0x01);
+ if (mxl_fail(ret))
+ break;
+ }
+
+ return ret;
+}
+
+#define PCA9534_I2C_ADDR (0x40 >> 1)
+static int pca9534_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ u8 w[2] = { 1, 0 };
+ u8 r = 0;
+ struct i2c_msg msg[] = {
+ { .addr = PCA9534_I2C_ADDR,
+ .flags = 0, .buf = w, .len = 1 },
+ { .addr = PCA9534_I2C_ADDR,
+ .flags = I2C_M_RD, .buf = &r, .len = 1 },
+ };
+
+ mxl_debug("(%d, %d)", gpio, val);
+
+ /* read current GPIO levels from flip-flop */
+ i2c_transfer(&state->d->i2c_adap, msg, 2);
+
+ /* prepare write buffer with current GPIO levels */
+ msg[0].len = 2;
+#if 0
+ w[0] = 1;
+#endif
+ w[1] = r;
+
+ /* clear the desired GPIO */
+ w[1] &= ~(1 << gpio);
+
+ /* set the desired GPIO value */
+ w[1] |= ((val ? 1 : 0) << gpio);
+
+ /* write new GPIO levels to flip-flop */
+ i2c_transfer(&state->d->i2c_adap, &msg[0], 1);
+
+ return 0;
+}
+
+static int pca9534_init_port_expander(struct mxl111sf_state *state)
+{
+ u8 w[2] = { 1, 0x07 }; /* write protect enabled, signal LEDs off */
+
+ struct i2c_msg msg = {
+ .addr = PCA9534_I2C_ADDR,
+ .flags = 0, .buf = w, .len = 2
+ };
+
+ mxl_debug("()");
+
+ i2c_transfer(&state->d->i2c_adap, &msg, 1);
+
+ /* configure all pins as outputs */
+ w[0] = 3;
+ w[1] = 0;
+
+ i2c_transfer(&state->d->i2c_adap, &msg, 1);
+
+ return 0;
+}
+
+int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ mxl_debug("(%d, %d)", gpio, val);
+
+ switch (state->gpio_port_expander) {
+ default:
+ mxl_printk(KERN_ERR,
+ "gpio_port_expander undefined, assuming PCA9534");
+ /* fall-thru */
+ case mxl111sf_PCA9534:
+ return pca9534_set_gpio(state, gpio, val);
+ case mxl111sf_gpio_hw:
+ return mxl111sf_hw_set_gpio(state, gpio, val);
+ }
+}
+
+static int mxl111sf_probe_port_expander(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 w = 1;
+ u8 r = 0;
+ struct i2c_msg msg[] = {
+ { .flags = 0, .buf = &w, .len = 1 },
+ { .flags = I2C_M_RD, .buf = &r, .len = 1 },
+ };
+
+ mxl_debug("()");
+
+ msg[0].addr = 0x70 >> 1;
+ msg[1].addr = 0x70 >> 1;
+
+ /* read current GPIO levels from flip-flop */
+ ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
+ if (ret == 2) {
+ state->port_expander_addr = msg[0].addr;
+ state->gpio_port_expander = mxl111sf_PCA9534;
+ mxl_debug("found port expander at 0x%02x",
+ state->port_expander_addr);
+ return 0;
+ }
+
+ msg[0].addr = 0x40 >> 1;
+ msg[1].addr = 0x40 >> 1;
+
+ ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
+ if (ret == 2) {
+ state->port_expander_addr = msg[0].addr;
+ state->gpio_port_expander = mxl111sf_PCA9534;
+ mxl_debug("found port expander at 0x%02x",
+ state->port_expander_addr);
+ return 0;
+ }
+ state->port_expander_addr = 0xff;
+ state->gpio_port_expander = mxl111sf_gpio_hw;
+ mxl_debug("using hardware gpio");
+ return 0;
+}
+
+int mxl111sf_init_port_expander(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ if (0x00 == state->port_expander_addr)
+ mxl111sf_probe_port_expander(state);
+
+ switch (state->gpio_port_expander) {
+ default:
+ mxl_printk(KERN_ERR,
+ "gpio_port_expander undefined, assuming PCA9534");
+ /* fall-thru */
+ case mxl111sf_PCA9534:
+ return pca9534_init_port_expander(state);
+ case mxl111sf_gpio_hw:
+ return mxl111sf_hw_gpio_initialize(state);
+ }
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode)
+{
+/* GPO:
+ * 3 - ATSC/MH# | 1 = ATSC transport, 0 = MH transport | default 0
+ * 4 - ATSC_RST## | 1 = ATSC enable, 0 = ATSC Reset | default 0
+ * 5 - ATSC_EN | 1 = ATSC power enable, 0 = ATSC power off | default 0
+ * 6 - MH_RESET# | 1 = MH enable, 0 = MH Reset | default 0
+ * 7 - MH_EN | 1 = MH power enable, 0 = MH power off | default 0
+ */
+ mxl_debug("(%d)", mode);
+
+ switch (mode) {
+ case MXL111SF_GPIO_MOD_MH:
+ mxl111sf_set_gpio(state, 4, 0);
+ mxl111sf_set_gpio(state, 5, 0);
+ msleep(50);
+ mxl111sf_set_gpio(state, 7, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 6, 1);
+ msleep(50);
+
+ mxl111sf_set_gpio(state, 3, 0);
+ break;
+ case MXL111SF_GPIO_MOD_ATSC:
+ mxl111sf_set_gpio(state, 6, 0);
+ mxl111sf_set_gpio(state, 7, 0);
+ msleep(50);
+ mxl111sf_set_gpio(state, 5, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 4, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 3, 1);
+ break;
+ default: /* DVBT / STANDBY */
+ mxl111sf_init_port_expander(state);
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h
new file mode 100644
index 0000000..0220f54
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h
@@ -0,0 +1,56 @@
+/*
+ * mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_GPIO_H_
+#define _DVB_USB_MXL111SF_GPIO_H_
+
+#include "mxl111sf.h"
+
+int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val);
+int mxl111sf_init_port_expander(struct mxl111sf_state *state);
+
+#define MXL111SF_GPIO_MOD_DVBT 0
+#define MXL111SF_GPIO_MOD_MH 1
+#define MXL111SF_GPIO_MOD_ATSC 2
+int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode);
+
+enum mxl111sf_mux_config {
+ PIN_MUX_DEFAULT = 0,
+ PIN_MUX_TS_OUT_PARALLEL,
+ PIN_MUX_TS_OUT_SERIAL,
+ PIN_MUX_GPIO_MODE,
+ PIN_MUX_TS_SERIAL_IN_MODE_0,
+ PIN_MUX_TS_SERIAL_IN_MODE_1,
+ PIN_MUX_TS_SPI_IN_MODE_0,
+ PIN_MUX_TS_SPI_IN_MODE_1,
+ PIN_MUX_TS_PARALLEL_IN,
+ PIN_MUX_BT656_I2S_MODE,
+};
+
+int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
+ enum mxl111sf_mux_config pin_mux_config);
+
+#endif /* _DVB_USB_MXL111SF_GPIO_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
new file mode 100644
index 0000000..2e8c288
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
@@ -0,0 +1,851 @@
+/*
+ * mxl111sf-i2c.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-i2c.h"
+#include "mxl111sf.h"
+
+/* SW-I2C ----------------------------------------------------------------- */
+
+#define SW_I2C_ADDR 0x1a
+#define SW_I2C_EN 0x02
+#define SW_SCL_OUT 0x04
+#define SW_SDA_OUT 0x08
+#define SW_SDA_IN 0x04
+
+#define SW_I2C_BUSY_ADDR 0x2f
+#define SW_I2C_BUSY 0x02
+
+static int mxl111sf_i2c_bitbang_sendbyte(struct mxl111sf_state *state,
+ u8 byte)
+{
+ int i, ret;
+ u8 data = 0;
+
+ mxl_i2c("(0x%02x)", byte);
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ for (i = 0; i < 8; i++) {
+
+ data = (byte & (0x80 >> i)) ? SW_SDA_OUT : 0;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+
+ /* last bit was 0 so we need to release SDA */
+ if (!(byte & 1)) {
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+
+ /* CLK high for ACK readback */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* drop the CLK after getting ACK, SDA will go high right away */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (data & SW_SDA_IN)
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_bitbang_recvbyte(struct mxl111sf_state *state,
+ u8 *pbyte)
+{
+ int i, ret;
+ u8 byte = 0;
+ u8 data = 0;
+
+ mxl_i2c("()");
+
+ *pbyte = 0;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ for (i = 0; i < 8; i++) {
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN |
+ SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (data & SW_SDA_IN)
+ byte |= (0x80 >> i);
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+ *pbyte = byte;
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_start(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN); /* start */
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_stop(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN); /* stop */
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_SCL_OUT | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_ack(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 b = 0;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &b);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* pull SDA low */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_nack(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ /* SDA high to signal last byte read from slave */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_i2c_sw_xfer_msg(struct mxl111sf_state *state,
+ struct i2c_msg *msg)
+{
+ int i, ret;
+
+ mxl_i2c("()");
+
+ if (msg->flags & I2C_M_RD) {
+
+ ret = mxl111sf_i2c_start(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ (msg->addr << 1) | 0x01);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ for (i = 0; i < msg->len; i++) {
+ ret = mxl111sf_i2c_bitbang_recvbyte(state,
+ &msg->buf[i]);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ if (i < msg->len - 1)
+ mxl111sf_i2c_ack(state);
+ }
+
+ mxl111sf_i2c_nack(state);
+
+ ret = mxl111sf_i2c_stop(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ } else {
+
+ ret = mxl111sf_i2c_start(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ (msg->addr << 1) & 0xfe);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ for (i = 0; i < msg->len; i++) {
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ msg->buf[i]);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+ }
+
+ /* FIXME: we only want to do this on the last transaction */
+ mxl111sf_i2c_stop(state);
+ }
+fail:
+ return ret;
+}
+
+/* HW-I2C ----------------------------------------------------------------- */
+
+#define USB_WRITE_I2C_CMD 0x99
+#define USB_READ_I2C_CMD 0xdd
+#define USB_END_I2C_CMD 0xfe
+
+#define USB_WRITE_I2C_CMD_LEN 26
+#define USB_READ_I2C_CMD_LEN 24
+
+#define I2C_MUX_REG 0x30
+#define I2C_CONTROL_REG 0x00
+#define I2C_SLAVE_ADDR_REG 0x08
+#define I2C_DATA_REG 0x0c
+#define I2C_INT_STATUS_REG 0x10
+
+static int mxl111sf_i2c_send_data(struct mxl111sf_state *state,
+ u8 index, u8 *wdata)
+{
+ int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+ &wdata[1], 25, NULL, 0);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+static int mxl111sf_i2c_get_data(struct mxl111sf_state *state,
+ u8 index, u8 *wdata, u8 *rdata)
+{
+ int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+ &wdata[1], 25, rdata, 24);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+static u8 mxl111sf_i2c_check_status(struct mxl111sf_state *state)
+{
+ u8 status = 0;
+ u8 buf[26];
+
+ mxl_i2c_adv("()");
+
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ buf[2] = I2C_INT_STATUS_REG;
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+
+ buf[5] = USB_END_I2C_CMD;
+
+ mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+ if (buf[1] & 0x04)
+ status = 1;
+
+ return status;
+}
+
+static u8 mxl111sf_i2c_check_fifo(struct mxl111sf_state *state)
+{
+ u8 status = 0;
+ u8 buf[26];
+
+ mxl_i2c("()");
+
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+
+ buf[5] = I2C_INT_STATUS_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+ buf[8] = USB_END_I2C_CMD;
+
+ mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+ if (0x08 == (buf[1] & 0x08))
+ status = 1;
+
+ if ((buf[5] & 0x02) == 0x02)
+ mxl_i2c("(buf[5] & 0x02) == 0x02"); /* FIXME */
+
+ return status;
+}
+
+static int mxl111sf_i2c_readagain(struct mxl111sf_state *state,
+ u8 count, u8 *rbuf)
+{
+ u8 i2c_w_data[26];
+ u8 i2c_r_data[24];
+ u8 i = 0;
+ u8 fifo_status = 0;
+ int ret;
+ int status = 0;
+
+ mxl_i2c("read %d bytes", count);
+
+ while ((fifo_status == 0) && (i++ < 5))
+ fifo_status = mxl111sf_i2c_check_fifo(state);
+
+ i2c_w_data[0] = 0xDD;
+ i2c_w_data[1] = 0x00;
+
+ for (i = 2; i < 26; i++)
+ i2c_w_data[i] = 0xFE;
+
+ for (i = 0; i < count; i++) {
+ i2c_w_data[2+(i*3)] = 0x0C;
+ i2c_w_data[3+(i*3)] = 0x00;
+ i2c_w_data[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+
+ /* Check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("error!");
+ } else {
+ for (i = 0; i < count; i++) {
+ rbuf[i] = i2c_r_data[(i*3)+1];
+ mxl_i2c("%02x\t %02x",
+ i2c_r_data[(i*3)+1],
+ i2c_r_data[(i*3)+2]);
+ }
+
+ status = 1;
+ }
+
+ return status;
+}
+
+#define HWI2C400 1
+static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
+ struct i2c_msg *msg)
+{
+ int i, k, ret = 0;
+ u16 index = 0;
+ u8 buf[26];
+ u8 i2c_r_data[24];
+ u16 block_len;
+ u16 left_over_len;
+ u8 rd_status[8];
+ u8 ret_status;
+ u8 readbuff[26];
+
+ mxl_i2c("addr: 0x%02x, read buff len: %d, write buff len: %d",
+ msg->addr, (msg->flags & I2C_M_RD) ? msg->len : 0,
+ (!(msg->flags & I2C_M_RD)) ? msg->len : 0);
+
+ for (index = 0; index < 26; index++)
+ buf[index] = USB_END_I2C_CMD;
+
+ /* command to indicate data payload is destined for I2C interface */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* enable I2C interface */
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x80;
+ buf[4] = 0x00;
+
+ /* enable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x81;
+ buf[7] = 0x00;
+
+ /* set Timeout register on I2C interface */
+ buf[8] = 0x14;
+ buf[9] = 0xff;
+ buf[10] = 0x00;
+#if 0
+ /* enable Interrupts on I2C interface */
+ buf[8] = 0x24;
+ buf[9] = 0xF7;
+ buf[10] = 0x00;
+#endif
+ buf[11] = 0x24;
+ buf[12] = 0xF7;
+ buf[13] = 0x00;
+
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* write data on I2C bus */
+ if (!(msg->flags & I2C_M_RD) && (msg->len > 0)) {
+ mxl_i2c("%d\t%02x", msg->len, msg->buf[0]);
+
+ /* control register on I2C interface to initialize I2C bus */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x5E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ /* I2C Slave device Address */
+ buf[5] = I2C_SLAVE_ADDR_REG;
+ buf[6] = (msg->addr);
+ buf[7] = 0x00;
+ buf[8] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for slave device status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* I2C interface can do I2C operations in block of 8 bytes of
+ I2C data. calculation to figure out number of blocks of i2c
+ data required to program */
+ block_len = (msg->len / 8);
+ left_over_len = (msg->len % 8);
+ index = 0;
+
+ mxl_i2c("block_len %d, left_over_len %d",
+ block_len, left_over_len);
+
+ for (index = 0; index < block_len; index++) {
+ for (i = 0; i < 8; i++) {
+ /* write data on I2C interface */
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = msg->buf[(index*8)+i];
+ buf[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ }
+
+ if (left_over_len) {
+ for (k = 0; k < 26; k++)
+ buf[k] = USB_END_I2C_CMD;
+
+ buf[0] = 0x99;
+ buf[1] = 0x00;
+
+ for (i = 0; i < left_over_len; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = msg->buf[(index*8)+i];
+ mxl_i2c("index = %d %d data %d",
+ index, i, msg->buf[(index*8)+i]);
+ buf[4+(i*3)] = 0x00;
+ }
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ }
+
+ /* issue I2C STOP after write */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ }
+
+ /* read data from I2C bus */
+ if ((msg->flags & I2C_M_RD) && (msg->len > 0)) {
+ mxl_i2c("read buf len %d", msg->len);
+
+ /* command to indicate data payload is
+ destined for I2C interface */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xDF;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ /* I2C xfer length */
+ buf[5] = 0x14;
+ buf[6] = (msg->len & 0xFF);
+ buf[7] = 0;
+
+ /* I2C slave device Address */
+ buf[8] = I2C_SLAVE_ADDR_REG;
+ buf[9] = msg->addr;
+ buf[10] = 0x00;
+ buf[11] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* I2C interface can do I2C operations in block of 8 bytes of
+ I2C data. calculation to figure out number of blocks of
+ i2c data required to program */
+ block_len = ((msg->len) / 8);
+ left_over_len = ((msg->len) % 8);
+ index = 0;
+
+ mxl_i2c("block_len %d, left_over_len %d",
+ block_len, left_over_len);
+
+ /* command to read data from I2C interface */
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ for (index = 0; index < block_len; index++) {
+ /* setup I2C read request packet on I2C interface */
+ for (i = 0; i < 8; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = 0x00;
+ buf[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_get_data(state, 0, buf, i2c_r_data);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* copy data from i2c data payload to read buffer */
+ for (i = 0; i < 8; i++) {
+ rd_status[i] = i2c_r_data[(i*3)+2];
+
+ if (rd_status[i] == 0x04) {
+ if (i < 7) {
+ mxl_i2c("i2c fifo empty!"
+ " @ %d", i);
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ /* read again */
+ ret_status =
+ mxl111sf_i2c_readagain(
+ state, 8-(i+1),
+ readbuff);
+ if (ret_status == 1) {
+ for (k = 0;
+ k < 8-(i+1);
+ k++) {
+
+ msg->buf[(index*8)+(k+i+1)] =
+ readbuff[k];
+ mxl_i2c("read data: %02x\t %02x",
+ msg->buf[(index*8)+(k+i)],
+ (index*8)+(k+i));
+ mxl_i2c("read data: %02x\t %02x",
+ msg->buf[(index*8)+(k+i+1)],
+ readbuff[k]);
+
+ }
+ goto stop_copy;
+ } else {
+ mxl_i2c("readagain "
+ "ERROR!");
+ }
+ } else {
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ }
+ } else {
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ }
+ }
+stop_copy:
+ ;
+
+ }
+
+ if (left_over_len) {
+ for (k = 0; k < 26; k++)
+ buf[k] = USB_END_I2C_CMD;
+
+ buf[0] = 0xDD;
+ buf[1] = 0x00;
+
+ for (i = 0; i < left_over_len; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = 0x00;
+ buf[4+(i*3)] = 0x00;
+ }
+ ret = mxl111sf_i2c_get_data(state, 0, buf,
+ i2c_r_data);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ for (i = 0; i < left_over_len; i++) {
+ msg->buf[(block_len*8)+i] =
+ i2c_r_data[(i*3)+1];
+ mxl_i2c("read data: %02x\t %02x",
+ i2c_r_data[(i*3)+1],
+ i2c_r_data[(i*3)+2]);
+ }
+ }
+
+ /* indicate I2C interface to issue NACK
+ after next I2C read op */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* control register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x17;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ buf[5] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* control register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ }
+exit:
+ /* STOP and disable I2C MUX */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* de-initilize I2C BUS */
+ buf[5] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* Control Register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xDF;
+ buf[4] = 0x03;
+
+ /* disable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+
+ /* de-initilize I2C BUS */
+ buf[8] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* disable I2C interface */
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x81;
+ buf[4] = 0x00;
+
+ /* disable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+
+ /* disable I2C interface */
+ buf[8] = I2C_MUX_REG;
+ buf[9] = 0x00;
+ buf[10] = 0x00;
+
+ buf[11] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct mxl111sf_state *state = d->priv;
+ int hwi2c = (state->chip_rev > MXL111SF_V6);
+ int i, ret;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ ret = (hwi2c) ?
+ mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) :
+ mxl111sf_i2c_sw_xfer_msg(state, &msg[i]);
+ if (mxl_fail(ret)) {
+ mxl_debug_adv("failed with error %d on i2c "
+ "transaction %d of %d, %sing %d bytes "
+ "to/from 0x%02x", ret, i+1, num,
+ (msg[i].flags & I2C_M_RD) ?
+ "read" : "writ",
+ msg[i].len, msg[i].addr);
+
+ break;
+ }
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return i == num ? num : -EREMOTEIO;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h
new file mode 100644
index 0000000..a57a45f
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h
@@ -0,0 +1,35 @@
+/*
+ * mxl111sf-i2c.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_I2C_H_
+#define _DVB_USB_MXL111SF_I2C_H_
+
+#include <linux/i2c.h>
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num);
+
+#endif /* _DVB_USB_MXL111SF_I2C_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
new file mode 100644
index 0000000..91dc1fc
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
@@ -0,0 +1,342 @@
+/*
+ * mxl111sf-phy.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
+{
+ struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
+ {0x07, 0xff, 0x0c},
+ {0x58, 0xff, 0x9d},
+ {0x09, 0xff, 0x00},
+ {0x06, 0xff, 0x06},
+ {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
+ {0x8d, 0x01, 0x01}, /* NEGATE_Q */
+ {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
+ {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
+ {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
+ {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
+ {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
+ {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
+ {0x88, 0xff, 0xf0}, /* INF_THD = 240 */
+ {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
+ {0x00, 0xff, 0x01}, /* Change to page 1 */
+ {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
+ {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
+ {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
+ {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
+ {0x00, 0xff, 0x00}, /* Change to page 0 */
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
+}
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
+{
+ int ret;
+ mxl_debug("()");
+
+ ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
+{
+ int ret;
+
+ mxl_debug("(%s)", MXL_SOC_MODE == mode ?
+ "MXL_SOC_MODE" : "MXL_TUNER_MODE");
+
+ /* set device mode */
+ ret = mxl111sf_write_reg(state, 0x03,
+ MXL_SOC_MODE == mode ? 0x01 : 0x00);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg_mask(state,
+ 0x7d, 0x40, MXL_SOC_MODE == mode ?
+ 0x00 : /* enable impulse noise filter,
+ INF_BYP = 0 */
+ 0x40); /* disable impulse noise filter,
+ INF_BYP = 1 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->device_mode = mode;
+fail:
+ return ret;
+}
+
+/* power up tuner */
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
+{
+ mxl_debug("(%d)", onoff);
+
+ return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
+}
+
+int mxl111sf_disable_656_port(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
+}
+
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
+}
+
+/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+ unsigned int parallel_serial,
+ unsigned int msb_lsb_1st,
+ unsigned int clock_phase,
+ unsigned int mpeg_valid_pol,
+ unsigned int mpeg_sync_pol)
+{
+ int ret;
+ u8 mode, tmp;
+
+ mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
+ clock_phase, mpeg_valid_pol, mpeg_sync_pol);
+
+ /* Enable PIN MUX */
+ ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
+ mxl_fail(ret);
+
+ /* Configure MPEG Clock phase */
+ mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
+
+ if (clock_phase == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_CLK_PHASE;
+ else
+ mode |= V6_INVERTED_CLK_PHASE;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
+ mxl_fail(ret);
+
+ /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
+ * Get current configuration */
+ ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
+ mxl_fail(ret);
+
+ /* Data Input mode */
+ if (parallel_serial == TSIF_INPUT_PARALLEL) {
+ /* Disable serial mode */
+ mode &= ~V6_MPEG_IN_DATA_SERIAL;
+
+ /* Enable Parallel mode */
+ mode |= V6_MPEG_IN_DATA_PARALLEL;
+ } else {
+ /* Disable Parallel mode */
+ mode &= ~V6_MPEG_IN_DATA_PARALLEL;
+
+ /* Enable Serial Mode */
+ mode |= V6_MPEG_IN_DATA_SERIAL;
+
+ /* If serial interface is chosen, configure
+ MSB or LSB order in transmission */
+ ret = mxl111sf_read_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ &tmp);
+ mxl_fail(ret);
+
+ if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
+ tmp |= V6_MPEG_SER_MSB_FIRST;
+ else
+ tmp &= ~V6_MPEG_SER_MSB_FIRST;
+
+ ret = mxl111sf_write_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ tmp);
+ mxl_fail(ret);
+ }
+
+ /* MPEG Sync polarity */
+ if (mpeg_sync_pol == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_MPEG_SYNC;
+ else
+ mode |= V6_INVERTED_MPEG_SYNC;
+
+ /* MPEG Valid polarity */
+ if (mpeg_valid_pol == 0)
+ mode &= ~V6_INVERTED_MPEG_VALID;
+ else
+ mode |= V6_INVERTED_MPEG_VALID;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
+{
+ static struct mxl111sf_reg_ctrl_info init_i2s[] = {
+ {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
+ {0x15, 0x60, 0x60}, /* Enable I2S */
+ {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
+ Inverted 656 Clock, I2S_SOFT_RESET,
+ 0 : Normal operation, 1 : Reset State */
+#if 0
+ {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
+#endif
+ {0x00, 0xff, 0x02}, /* Change to Control Page */
+ {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
+ {0x00, 0xff, 0x00},
+ {0, 0, 0}
+ };
+ int ret;
+
+ mxl_debug("(0x%02x)", sample_size);
+
+ ret = mxl111sf_ctrl_program_regs(state, init_i2s);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
+{
+ static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
+ {0x15, 0x40, 0x00},
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, disable_i2s);
+}
+
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+ u8 msb_start_pos, u8 data_width)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= msb_start_pos;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= data_width;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
+{
+ u8 val;
+ int ret;
+
+ mxl_debug("(%d)", onoff);
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x02);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (onoff)
+ val |= 0x04;
+ else
+ val &= ~0x04;
+
+ ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x00);
+ if (mxl_fail(ret))
+ goto fail;
+fail:
+ return ret;
+}
+
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+ u8 control_mode, u8 current_setting,
+ u8 current_value, u8 hysteresis_value)
+{
+ int ret;
+ u8 val;
+ /* current value will be set for both automatic & manual IDAC control */
+ val = current_value;
+
+ if (control_mode == IDAC_MANUAL_CONTROL) {
+ /* enable manual control of IDAC */
+ val |= IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
+ /* enable current sinking in manual mode */
+ val |= IDAC_CURRENT_SINKING_BIT_MASK;
+ else
+ /* disable current sinking in manual mode */
+ val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
+ } else {
+ /* disable manual control of IDAC */
+ val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ /* set hysteresis value reg: 0x0B<5:0> */
+ ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
+ (hysteresis_value & 0x3F));
+ }
+
+ ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+
+ return val;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.h b/drivers/media/dvb/dvb-usb/mxl111sf-phy.h
new file mode 100644
index 0000000..f075607
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.h
@@ -0,0 +1,53 @@
+/*
+ * mxl111sf-phy.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_PHY_H_
+#define _DVB_USB_MXL111SF_PHY_H_
+
+#include "mxl111sf.h"
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state);
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode);
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff);
+int mxl111sf_disable_656_port(struct mxl111sf_state *state);
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state);
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state);
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+ unsigned int parallel_serial,
+ unsigned int msb_lsb_1st,
+ unsigned int clock_phase,
+ unsigned int mpeg_valid_pol,
+ unsigned int mpeg_sync_pol);
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+ u8 msb_start_pos, u8 data_width);
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size);
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state);
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff);
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+ u8 control_mode, u8 current_setting,
+ u8 current_value, u8 hysteresis_value);
+
+#endif /* _DVB_USB_MXL111SF_PHY_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-reg.h b/drivers/media/dvb/dvb-usb/mxl111sf-reg.h
new file mode 100644
index 0000000..17831b0
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-reg.h
@@ -0,0 +1,179 @@
+/*
+ * mxl111sf-reg.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_REG_H_
+#define _DVB_USB_MXL111SF_REG_H_
+
+#define CHIP_ID_REG 0xFC
+#define TOP_CHIP_REV_ID_REG 0xFA
+
+#define V6_SNR_RB_LSB_REG 0x27
+#define V6_SNR_RB_MSB_REG 0x28
+
+#define V6_N_ACCUMULATE_REG 0x11
+#define V6_RS_AVG_ERRORS_LSB_REG 0x2C
+#define V6_RS_AVG_ERRORS_MSB_REG 0x2D
+
+#define V6_IRQ_STATUS_REG 0x24
+#define IRQ_MASK_FEC_LOCK 0x10
+
+#define V6_SYNC_LOCK_REG 0x28
+#define SYNC_LOCK_MASK 0x10
+
+#define V6_RS_LOCK_DET_REG 0x28
+#define RS_LOCK_DET_MASK 0x08
+
+#define V6_INITACQ_NODETECT_REG 0x20
+#define V6_FORCE_NFFT_CPSIZE_REG 0x20
+
+#define V6_CODE_RATE_TPS_REG 0x29
+#define V6_CODE_RATE_TPS_MASK 0x07
+
+
+#define V6_CP_LOCK_DET_REG 0x28
+#define V6_CP_LOCK_DET_MASK 0x04
+
+#define V6_TPS_HIERACHY_REG 0x29
+#define V6_TPS_HIERARCHY_INFO_MASK 0x40
+
+#define V6_MODORDER_TPS_REG 0x2A
+#define V6_PARAM_CONSTELLATION_MASK 0x30
+
+#define V6_MODE_TPS_REG 0x2A
+#define V6_PARAM_FFT_MODE_MASK 0x0C
+
+
+#define V6_CP_TPS_REG 0x29
+#define V6_PARAM_GI_MASK 0x30
+
+#define V6_TPS_LOCK_REG 0x2A
+#define V6_PARAM_TPS_LOCK_MASK 0x40
+
+#define V6_FEC_PER_COUNT_REG 0x2E
+#define V6_FEC_PER_SCALE_REG 0x2B
+#define V6_FEC_PER_SCALE_MASK 0x03
+#define V6_FEC_PER_CLR_REG 0x20
+#define V6_FEC_PER_CLR_MASK 0x01
+
+#define V6_PIN_MUX_MODE_REG 0x1B
+#define V6_ENABLE_PIN_MUX 0x1E
+
+#define V6_I2S_NUM_SAMPLES_REG 0x16
+
+#define V6_MPEG_IN_CLK_INV_REG 0x17
+#define V6_MPEG_IN_CTRL_REG 0x18
+
+#define V6_INVERTED_CLK_PHASE 0x20
+#define V6_MPEG_IN_DATA_PARALLEL 0x01
+#define V6_MPEG_IN_DATA_SERIAL 0x02
+
+#define V6_INVERTED_MPEG_SYNC 0x04
+#define V6_INVERTED_MPEG_VALID 0x08
+
+#define TSIF_INPUT_PARALLEL 0
+#define TSIF_INPUT_SERIAL 1
+#define TSIF_NORMAL 0
+
+#define V6_MPEG_INOUT_BIT_ORDER_CTRL_REG 0x19
+#define V6_MPEG_SER_MSB_FIRST 0x80
+#define MPEG_SER_MSB_FIRST_ENABLED 0x01
+
+#define V6_656_I2S_BUFF_STATUS_REG 0x2F
+#define V6_656_OVERFLOW_MASK_BIT 0x08
+#define V6_I2S_OVERFLOW_MASK_BIT 0x01
+
+#define V6_I2S_STREAM_START_BIT_REG 0x14
+#define V6_I2S_STREAM_END_BIT_REG 0x15
+#define I2S_RIGHT_JUSTIFIED 0
+#define I2S_LEFT_JUSTIFIED 1
+#define I2S_DATA_FORMAT 2
+
+#define V6_TUNER_LOOP_THRU_CONTROL_REG 0x09
+#define V6_ENABLE_LOOP_THRU 0x01
+
+#define TOTAL_NUM_IF_OUTPUT_FREQ 16
+
+#define TUNER_NORMAL_IF_SPECTRUM 0x0
+#define TUNER_INVERT_IF_SPECTRUM 0x10
+
+#define V6_TUNER_IF_SEL_REG 0x06
+#define V6_TUNER_IF_FCW_REG 0x3C
+#define V6_TUNER_IF_FCW_BYP_REG 0x3D
+#define V6_RF_LOCK_STATUS_REG 0x23
+
+#define NUM_DIG_TV_CHANNEL 1000
+
+#define V6_DIG_CLK_FREQ_SEL_REG 0x07
+#define V6_REF_SYNTH_INT_REG 0x5C
+#define V6_REF_SYNTH_REMAIN_REG 0x58
+#define V6_DIG_RFREFSELECT_REG 0x32
+#define V6_XTAL_CLK_OUT_GAIN_REG 0x31
+#define V6_TUNER_LOOP_THRU_CTRL_REG 0x09
+#define V6_DIG_XTAL_ENABLE_REG 0x06
+#define V6_DIG_XTAL_BIAS_REG 0x66
+#define V6_XTAL_CAP_REG 0x08
+
+#define V6_GPO_CTRL_REG 0x18
+#define MXL_GPO_0 0x00
+#define MXL_GPO_1 0x01
+#define V6_GPO_0_MASK 0x10
+#define V6_GPO_1_MASK 0x20
+
+#define V6_111SF_GPO_CTRL_REG 0x19
+#define MXL_111SF_GPO_1 0x00
+#define MXL_111SF_GPO_2 0x01
+#define MXL_111SF_GPO_3 0x02
+#define MXL_111SF_GPO_4 0x03
+#define MXL_111SF_GPO_5 0x04
+#define MXL_111SF_GPO_6 0x05
+#define MXL_111SF_GPO_7 0x06
+
+#define MXL_111SF_GPO_0_MASK 0x01
+#define MXL_111SF_GPO_1_MASK 0x02
+#define MXL_111SF_GPO_2_MASK 0x04
+#define MXL_111SF_GPO_3_MASK 0x08
+#define MXL_111SF_GPO_4_MASK 0x10
+#define MXL_111SF_GPO_5_MASK 0x20
+#define MXL_111SF_GPO_6_MASK 0x40
+
+#define V6_ATSC_CONFIG_REG 0x0A
+
+#define MXL_MODE_REG 0x03
+#define START_TUNE_REG 0x1C
+
+#define V6_IDAC_HYSTERESIS_REG 0x0B
+#define V6_IDAC_SETTINGS_REG 0x0C
+#define IDAC_MANUAL_CONTROL 1
+#define IDAC_CURRENT_SINKING_ENABLE 1
+#define IDAC_MANUAL_CONTROL_BIT_MASK 0x80
+#define IDAC_CURRENT_SINKING_BIT_MASK 0x40
+
+#define V8_SPI_MODE_REG 0xE9
+
+#define V6_DIG_RF_PWR_LSB_REG 0x46
+#define V6_DIG_RF_PWR_MSB_REG 0x47
+
+#endif /* _DVB_USB_MXL111SF_REG_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c
new file mode 100644
index 0000000..a634105
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c
@@ -0,0 +1,476 @@
+/*
+ * mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-tuner.h"
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+/* debug */
+static int mxl111sf_tuner_debug;
+module_param_named(debug, mxl111sf_tuner_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+#define mxl_dbg(fmt, arg...) \
+ if (mxl111sf_tuner_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* ------------------------------------------------------------------------ */
+
+struct mxl111sf_tuner_state {
+ struct mxl111sf_state *mxl_state;
+
+ struct mxl111sf_tuner_config *cfg;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+static int mxl111sf_tuner_read_reg(struct mxl111sf_tuner_state *state,
+ u8 addr, u8 *data)
+{
+ return (state->cfg->read_reg) ?
+ state->cfg->read_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_tuner_write_reg(struct mxl111sf_tuner_state *state,
+ u8 addr, u8 data)
+{
+ return (state->cfg->write_reg) ?
+ state->cfg->write_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_tuner_program_regs(struct mxl111sf_tuner_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ return (state->cfg->program_regs) ?
+ state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
+ -EINVAL;
+}
+
+static int mxl1x1sf_tuner_top_master_ctrl(struct mxl111sf_tuner_state *state,
+ int onoff)
+{
+ return (state->cfg->top_master_ctrl) ?
+ state->cfg->top_master_ctrl(state->mxl_state, onoff) :
+ -EINVAL;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct mxl111sf_reg_ctrl_info mxl_phy_tune_rf[] = {
+ {0x1d, 0x7f, 0x00}, /* channel bandwidth section 1/2/3,
+ DIG_MODEINDEX, _A, _CSF, */
+ {0x1e, 0xff, 0x00}, /* channel frequency (lo and fractional) */
+ {0x1f, 0xff, 0x00}, /* channel frequency (hi for integer portion) */
+ {0, 0, 0}
+};
+
+/* ------------------------------------------------------------------------ */
+
+static struct mxl111sf_reg_ctrl_info *mxl111sf_calc_phy_tune_regs(u32 freq,
+ u8 bw)
+{
+ u8 filt_bw;
+
+ /* set channel bandwidth */
+ switch (bw) {
+ case 0: /* ATSC */
+ filt_bw = 25;
+ break;
+ case 1: /* QAM */
+ filt_bw = 69;
+ break;
+ case 6:
+ filt_bw = 21;
+ break;
+ case 7:
+ filt_bw = 42;
+ break;
+ case 8:
+ filt_bw = 63;
+ break;
+ default:
+ err("%s: invalid bandwidth setting!", __func__);
+ return NULL;
+ }
+
+ /* calculate RF channel */
+ freq /= 1000000;
+
+ freq *= 64;
+#if 0
+ /* do round */
+ freq += 0.5;
+#endif
+ /* set bandwidth */
+ mxl_phy_tune_rf[0].data = filt_bw;
+
+ /* set RF */
+ mxl_phy_tune_rf[1].data = (freq & 0xff);
+ mxl_phy_tune_rf[2].data = (freq >> 8) & 0xff;
+
+ /* start tune */
+ return mxl_phy_tune_rf;
+}
+
+static int mxl1x1sf_tuner_set_if_output_freq(struct mxl111sf_tuner_state *state)
+{
+ int ret;
+ u8 ctrl;
+#if 0
+ u16 iffcw;
+ u32 if_freq;
+#endif
+ mxl_dbg("(IF polarity = %d, IF freq = 0x%02x)",
+ state->cfg->invert_spectrum, state->cfg->if_freq);
+
+ /* set IF polarity */
+ ctrl = state->cfg->invert_spectrum;
+
+ ctrl |= state->cfg->if_freq;
+
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_SEL_REG, ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+#if 0
+ if_freq /= 1000000;
+
+ /* do round */
+ if_freq += 0.5;
+
+ if (MXL_IF_LO == state->cfg->if_freq) {
+ ctrl = 0x08;
+ iffcw = (u16)(if_freq / (108 * 4096));
+ } else if (MXL_IF_HI == state->cfg->if_freq) {
+ ctrl = 0x08;
+ iffcw = (u16)(if_freq / (216 * 4096));
+ } else {
+ ctrl = 0;
+ iffcw = 0;
+ }
+
+ ctrl |= (iffcw >> 8);
+#endif
+ ret = mxl111sf_tuner_read_reg(state, V6_TUNER_IF_FCW_BYP_REG, &ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ctrl &= 0xf0;
+ ctrl |= 0x90;
+
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_BYP_REG, ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+#if 0
+ ctrl = iffcw & 0x00ff;
+#endif
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_REG, ctrl);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl1x1sf_tune_rf(struct dvb_frontend *fe, u32 freq, u8 bw)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ static struct mxl111sf_reg_ctrl_info *reg_ctrl_array;
+ int ret;
+ u8 mxl_mode;
+
+ mxl_dbg("(freq = %d, bw = 0x%x)", freq, bw);
+
+ /* stop tune */
+ ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 0);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* check device mode */
+ ret = mxl111sf_tuner_read_reg(state, MXL_MODE_REG, &mxl_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* Fill out registers for channel tune */
+ reg_ctrl_array = mxl111sf_calc_phy_tune_regs(freq, bw);
+ if (!reg_ctrl_array)
+ return -EINVAL;
+
+ ret = mxl111sf_tuner_program_regs(state, reg_ctrl_array);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if ((mxl_mode & MXL_DEV_MODE_MASK) == MXL_TUNER_MODE) {
+ /* IF tuner mode only */
+ mxl1x1sf_tuner_top_master_ctrl(state, 0);
+ mxl1x1sf_tuner_top_master_ctrl(state, 1);
+ mxl1x1sf_tuner_set_if_output_freq(state);
+ }
+
+ ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (state->cfg->ant_hunt)
+ state->cfg->ant_hunt(fe);
+fail:
+ return ret;
+}
+
+static int mxl1x1sf_tuner_get_lock_status(struct mxl111sf_tuner_state *state,
+ int *rf_synth_lock,
+ int *ref_synth_lock)
+{
+ int ret;
+ u8 data;
+
+ *rf_synth_lock = 0;
+ *ref_synth_lock = 0;
+
+ ret = mxl111sf_tuner_read_reg(state, V6_RF_LOCK_STATUS_REG, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *ref_synth_lock = ((data & 0x03) == 0x03) ? 1 : 0;
+ *rf_synth_lock = ((data & 0x0c) == 0x0c) ? 1 : 0;
+fail:
+ return ret;
+}
+
+#if 0
+static int mxl1x1sf_tuner_loop_thru_ctrl(struct mxl111sf_tuner_state *state,
+ int onoff)
+{
+ return mxl111sf_tuner_write_reg(state, V6_TUNER_LOOP_THRU_CTRL_REG,
+ onoff ? 1 : 0);
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+ u8 bw;
+
+ mxl_dbg("()");
+
+ if (fe->ops.info.type == FE_ATSC) {
+ switch (params->u.vsb.modulation) {
+ case VSB_8:
+ case VSB_16:
+ bw = 0; /* ATSC */
+ break;
+ case QAM_64:
+ case QAM_256:
+ bw = 1; /* US CABLE */
+ break;
+ default:
+ err("%s: modulation not set!", __func__);
+ return -EINVAL;
+ }
+ } else if (fe->ops.info.type == FE_OFDM) {
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ bw = 6;
+ break;
+ case BANDWIDTH_7_MHZ:
+ bw = 7;
+ break;
+ case BANDWIDTH_8_MHZ:
+ bw = 8;
+ break;
+ default:
+ err("%s: bandwidth not set!", __func__);
+ return -EINVAL;
+ }
+ } else {
+ err("%s: modulation type not supported!", __func__);
+ return -EINVAL;
+ }
+ ret = mxl1x1sf_tune_rf(fe, params->frequency, bw);
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->frequency = params->frequency;
+ state->bandwidth = (fe->ops.info.type == FE_OFDM) ?
+ params->u.ofdm.bandwidth : 0;
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#if 0
+static int mxl111sf_tuner_init(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+
+ /* wake from standby handled by usb driver */
+
+ return ret;
+}
+
+static int mxl111sf_tuner_sleep(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+
+ /* enter standby mode handled by usb driver */
+
+ return ret;
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int rf_locked, ref_locked, ret;
+
+ *status = 0;
+
+ ret = mxl1x1sf_tuner_get_lock_status(state, &rf_locked, &ref_locked);
+ if (mxl_fail(ret))
+ goto fail;
+ mxl_info("%s%s", rf_locked ? "rf locked " : "",
+ ref_locked ? "ref locked" : "");
+
+ if ((rf_locked) || (ref_locked))
+ *status |= TUNER_STATUS_LOCKED;
+fail:
+ return ret;
+}
+
+static int mxl111sf_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ u8 val1, val2;
+ int ret;
+
+ *strength = 0;
+
+ ret = mxl111sf_tuner_write_reg(state, 0x00, 0x02);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_LSB_REG, &val1);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_MSB_REG, &val2);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *strength = val1 | ((val2 & 0x07) << 8);
+fail:
+ ret = mxl111sf_tuner_write_reg(state, 0x00, 0x00);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ *frequency = state->frequency;
+ return 0;
+}
+
+static int mxl111sf_tuner_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ *bandwidth = state->bandwidth;
+ return 0;
+}
+
+static int mxl111sf_tuner_release(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ mxl_dbg("()");
+ kfree(state);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static struct dvb_tuner_ops mxl111sf_tuner_tuner_ops = {
+ .info = {
+ .name = "MaxLinear MxL111SF",
+#if 0
+ .frequency_min = ,
+ .frequency_max = ,
+ .frequency_step = ,
+#endif
+ },
+#if 0
+ .init = mxl111sf_tuner_init,
+ .sleep = mxl111sf_tuner_sleep,
+#endif
+ .set_params = mxl111sf_tuner_set_params,
+ .get_status = mxl111sf_tuner_get_status,
+ .get_rf_strength = mxl111sf_get_rf_strength,
+ .get_frequency = mxl111sf_tuner_get_frequency,
+ .get_bandwidth = mxl111sf_tuner_get_bandwidth,
+ .release = mxl111sf_tuner_release,
+};
+
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state,
+ struct mxl111sf_tuner_config *cfg)
+{
+ struct mxl111sf_tuner_state *state = NULL;
+
+ mxl_dbg("()");
+
+ state = kzalloc(sizeof(struct mxl111sf_tuner_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->mxl_state = mxl_state;
+ state->cfg = cfg;
+
+ memcpy(&fe->ops.tuner_ops, &mxl111sf_tuner_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = state;
+ return fe;
+}
+EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach);
+
+MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
new file mode 100644
index 0000000..ff33396
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
@@ -0,0 +1,89 @@
+/*
+ * mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL111SF_TUNER_H__
+#define __MXL111SF_TUNER_H__
+
+#include "dvb_frontend.h"
+
+#include "mxl111sf.h"
+
+enum mxl_if_freq {
+#if 0
+ MXL_IF_LO = 0x00, /* other IF < 9MHz */
+#endif
+ MXL_IF_4_0 = 0x01, /* 4.0 MHz */
+ MXL_IF_4_5 = 0x02, /* 4.5 MHz */
+ MXL_IF_4_57 = 0x03, /* 4.57 MHz */
+ MXL_IF_5_0 = 0x04, /* 5.0 MHz */
+ MXL_IF_5_38 = 0x05, /* 5.38 MHz */
+ MXL_IF_6_0 = 0x06, /* 6.0 MHz */
+ MXL_IF_6_28 = 0x07, /* 6.28 MHz */
+ MXL_IF_7_2 = 0x08, /* 7.2 MHz */
+ MXL_IF_35_25 = 0x09, /* 35.25 MHz */
+ MXL_IF_36 = 0x0a, /* 36 MHz */
+ MXL_IF_36_15 = 0x0b, /* 36.15 MHz */
+ MXL_IF_44 = 0x0c, /* 44 MHz */
+#if 0
+ MXL_IF_HI = 0x0f, /* other IF > 35 MHz and < 45 MHz */
+#endif
+};
+
+struct mxl111sf_tuner_config {
+ enum mxl_if_freq if_freq;
+ unsigned int invert_spectrum:1;
+
+ int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
+ int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
+ int (*program_regs)(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+ int (*top_master_ctrl)(struct mxl111sf_state *state, int onoff);
+ int (*ant_hunt)(struct dvb_frontend *fe);
+};
+
+/* ------------------------------------------------------------------------ */
+
+#if defined(CONFIG_DVB_USB_MXL111SF) || \
+ (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE))
+extern
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state,
+ struct mxl111sf_tuner_config *cfg);
+#else
+static inline
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state
+ struct mxl111sf_tuner_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif /* __MXL111SF_TUNER_H__ */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
+
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c
new file mode 100644
index 0000000..546ba59
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.c
@@ -0,0 +1,864 @@
+/*
+ * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/i2c.h>
+
+#include "mxl111sf.h"
+#include "mxl111sf-reg.h"
+#include "mxl111sf-phy.h"
+#include "mxl111sf-i2c.h"
+#include "mxl111sf-gpio.h"
+
+#include "mxl111sf-tuner.h"
+
+#include "lgdt3305.h"
+
+int dvb_usb_mxl111sf_debug;
+module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level "
+ "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
+
+int dvb_usb_mxl111sf_isoc;
+module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644);
+MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc).");
+
+#define ANT_PATH_AUTO 0
+#define ANT_PATH_EXTERNAL 1
+#define ANT_PATH_INTERNAL 2
+
+int dvb_usb_mxl111sf_rfswitch =
+#if 0
+ ANT_PATH_AUTO;
+#else
+ ANT_PATH_EXTERNAL;
+#endif
+
+module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644);
+MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define deb_info(args...) dprintk(dvb_usb_mxl111sf_debug, 0x13, args)
+#define deb_reg(args...) dprintk(dvb_usb_mxl111sf_debug, 0x08, args)
+#define deb_adv(args...) dprintk(dvb_usb_mxl111sf_debug, MXL_ADV_DBG, args)
+
+int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
+ u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ int wo = (rbuf == NULL || rlen == 0); /* write-only */
+ int ret;
+ u8 sndbuf[1+wlen];
+
+ deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen);
+
+ memset(sndbuf, 0, 1+wlen);
+
+ sndbuf[0] = cmd;
+ memcpy(&sndbuf[1], wbuf, wlen);
+
+ ret = (wo) ? dvb_usb_generic_write(d, sndbuf, 1+wlen) :
+ dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#define MXL_CMD_REG_READ 0xaa
+#define MXL_CMD_REG_WRITE 0x55
+
+int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data)
+{
+ u8 buf[2];
+ int ret;
+
+ ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2);
+ if (mxl_fail(ret)) {
+ mxl_debug("error reading reg: 0x%02x", addr);
+ goto fail;
+ }
+
+ if (buf[0] == addr)
+ *data = buf[1];
+ else {
+ err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x",
+ addr, buf[0], buf[1]);
+ ret = -EINVAL;
+ }
+
+ deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data);
+fail:
+ return ret;
+}
+
+int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data)
+{
+ u8 buf[] = { addr, data };
+ int ret;
+
+ deb_reg("W: (0x%02x, 0x%02x)\n", addr, data);
+
+ ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0);
+ if (mxl_fail(ret))
+ err("error writing reg: 0x%02x, val: 0x%02x", addr, data);
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
+ u8 addr, u8 mask, u8 data)
+{
+ int ret;
+ u8 val;
+
+ if (mask != 0xff) {
+ ret = mxl111sf_read_reg(state, addr, &val);
+#if 1
+ /* dont know why this usually errors out on the first try */
+ if (mxl_fail(ret))
+ err("error writing addr: 0x%02x, mask: 0x%02x, "
+ "data: 0x%02x, retrying...", addr, mask, data);
+
+ ret = mxl111sf_read_reg(state, addr, &val);
+#endif
+ if (mxl_fail(ret))
+ goto fail;
+ }
+ val &= ~mask;
+ val |= data;
+
+ ret = mxl111sf_write_reg(state, addr, val);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ int i, ret = 0;
+
+ for (i = 0; ctrl_reg_info[i].addr |
+ ctrl_reg_info[i].mask |
+ ctrl_reg_info[i].data; i++) {
+
+ ret = mxl111sf_write_reg_mask(state,
+ ctrl_reg_info[i].addr,
+ ctrl_reg_info[i].mask,
+ ctrl_reg_info[i].data);
+ if (mxl_fail(ret)) {
+ err("failed on reg #%d (0x%02x)", i,
+ ctrl_reg_info[i].addr);
+ break;
+ }
+ }
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 id, ver;
+ char *mxl_chip, *mxl_rev;
+
+ if ((state->chip_id) && (state->chip_ver))
+ return 0;
+
+ ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id);
+ if (mxl_fail(ret))
+ goto fail;
+ state->chip_id = id;
+
+ ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver);
+ if (mxl_fail(ret))
+ goto fail;
+ state->chip_ver = ver;
+
+ switch (id) {
+ case 0x61:
+ mxl_chip = "MxL101SF";
+ break;
+ case 0x63:
+ mxl_chip = "MxL111SF";
+ break;
+ default:
+ mxl_chip = "UNKNOWN MxL1X1";
+ break;
+ }
+ switch (ver) {
+ case 0x36:
+ state->chip_rev = MXL111SF_V6;
+ mxl_rev = "v6";
+ break;
+ case 0x08:
+ state->chip_rev = MXL111SF_V8_100;
+ mxl_rev = "v8_100";
+ break;
+ case 0x18:
+ state->chip_rev = MXL111SF_V8_200;
+ mxl_rev = "v8_200";
+ break;
+ default:
+ state->chip_rev = 0;
+ mxl_rev = "UNKNOWN REVISION";
+ break;
+ }
+ info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver);
+fail:
+ return ret;
+}
+
+#define get_chip_info(state) \
+({ \
+ int ___ret; \
+ ___ret = mxl1x1sf_get_chip_info(state); \
+ if (mxl_fail(___ret)) { \
+ mxl_debug("failed to get chip info" \
+ " on first probe attempt"); \
+ ___ret = mxl1x1sf_get_chip_info(state); \
+ if (mxl_fail(___ret)) \
+ err("failed to get chip info during probe"); \
+ else \
+ mxl_debug("probe needed a retry " \
+ "in order to succeed."); \
+ } \
+ ___ret; \
+})
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ /* power control depends on which adapter is being woken:
+ * save this for init, instead, via mxl111sf_adap_fe_init */
+ return 0;
+}
+
+static int mxl111sf_adap_fe_init(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe->id].priv;
+
+ int err;
+
+ /* exit if we didnt initialize the driver yet */
+ if (!state->chip_id) {
+ mxl_debug("driver not yet initialized, exit.");
+ goto fail;
+ }
+
+ deb_info("%s()\n", __func__);
+
+ mutex_lock(&state->fe_lock);
+
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
+ err("set interface failed");
+
+ err = mxl1x1sf_soft_reset(state);
+ mxl_fail(err);
+ err = mxl111sf_init_tuner_demod(state);
+ mxl_fail(err);
+ err = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+
+ mxl_fail(err);
+ mxl111sf_enable_usb_output(state);
+ mxl_fail(err);
+ mxl1x1sf_top_master_ctrl(state, 1);
+ mxl_fail(err);
+
+ if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) &&
+ (state->chip_rev > MXL111SF_V6)) {
+ mxl111sf_config_pin_mux_modes(state,
+ PIN_MUX_TS_SPI_IN_MODE_1);
+ mxl_fail(err);
+ }
+ err = mxl111sf_init_port_expander(state);
+ if (!mxl_fail(err)) {
+ state->gpio_mode = adap_state->gpio_mode;
+ err = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ mxl_fail(err);
+#if 0
+ err = fe->ops.init(fe);
+#endif
+ msleep(100); /* add short delay after enabling
+ * the demod before touching it */
+ }
+
+ return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0;
+fail:
+ return -ENODEV;
+}
+
+static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe->id].priv;
+ int err;
+
+ /* exit if we didnt initialize the driver yet */
+ if (!state->chip_id) {
+ mxl_debug("driver not yet initialized, exit.");
+ goto fail;
+ }
+
+ deb_info("%s()\n", __func__);
+
+ err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0;
+
+ mutex_unlock(&state->fe_lock);
+
+ return err;
+fail:
+ return -ENODEV;
+}
+
+
+static int mxl111sf_ep6_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ struct mxl111sf_adap_state *adap_state = adap->fe_adap[adap->active_fe].priv;
+ int ret = 0;
+ u8 tmp;
+
+ deb_info("%s(%d)\n", __func__, onoff);
+
+ if (onoff) {
+ ret = mxl111sf_enable_usb_output(state);
+ mxl_fail(ret);
+ ret = mxl111sf_config_mpeg_in(state, 1, 1,
+ adap_state->ep6_clockphase,
+ 0, 0);
+ mxl_fail(ret);
+ } else {
+ ret = mxl111sf_disable_656_port(state);
+ mxl_fail(ret);
+ }
+
+ mxl111sf_read_reg(state, 0x12, &tmp);
+ tmp &= ~0x04;
+ mxl111sf_write_reg(state, 0x12, tmp);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+ .i2c_addr = 0xb2 >> 1,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .qam_if_khz = 6000,
+ .vsb_if_khz = 6000,
+};
+
+static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ int fe_id = adap->num_frontends_initialized;
+ struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
+ int ret;
+
+ deb_adv("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
+ err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_ATSC;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_TUNER_MODE;
+ adap_state->ep6_clockphase = 1;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_init_port_expander(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ adap->fe_adap[fe_id].fe = dvb_attach(lgdt3305_attach,
+ &hauppauge_lgdt3305_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe_adap[fe_id].fe) {
+ adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
+ adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
+ adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state,
+ int antpath)
+{
+ return mxl111sf_idac_config(state, 1, 1,
+ (antpath == ANT_PATH_INTERNAL) ?
+ 0x3f : 0x00, 0);
+}
+
+#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \
+ err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \
+ __func__, __LINE__, \
+ (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \
+ pwr0, pwr1, pwr2, pwr3)
+
+#define ANT_HUNT_SLEEP 90
+#define ANT_EXT_TWEAK 0
+
+static int mxl111sf_ant_hunt(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+
+ int antctrl = dvb_usb_mxl111sf_rfswitch;
+
+ u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2;
+
+ /* FIXME: must force EXTERNAL for QAM - done elsewhere */
+ mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ?
+ ANT_PATH_EXTERNAL : antctrl);
+
+ if (antctrl == ANT_PATH_AUTO) {
+#if 0
+ msleep(ANT_HUNT_SLEEP);
+#endif
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2);
+
+ if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) {
+ /* return with EXTERNAL enabled */
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA,
+ rxPwr0, rxPwr1, rxPwr2);
+ } else {
+ /* return with INTERNAL enabled */
+ DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA,
+ rxPwr0, rxPwr1, rxPwr2);
+ }
+ }
+ return 0;
+}
+
+static struct mxl111sf_tuner_config mxl_tuner_config = {
+ .if_freq = MXL_IF_6_0, /* applies to external IF output, only */
+ .invert_spectrum = 0,
+ .read_reg = mxl111sf_read_reg,
+ .write_reg = mxl111sf_write_reg,
+ .program_regs = mxl111sf_ctrl_program_regs,
+ .top_master_ctrl = mxl1x1sf_top_master_ctrl,
+ .ant_hunt = mxl111sf_ant_hunt,
+};
+
+static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ int fe_id = adap->num_frontends_initialized;
+
+ deb_adv("%s()\n", __func__);
+
+ if (NULL != dvb_attach(mxl111sf_tuner_attach,
+ adap->fe_adap[fe_id].fe, state,
+ &mxl_tuner_config))
+ return 0;
+
+ return -EIO;
+}
+
+static int mxl111sf_fe_ioctl_override(struct dvb_frontend *fe,
+ unsigned int cmd, void *parg,
+ unsigned int stage)
+{
+ int err = 0;
+
+ switch (stage) {
+ case DVB_FE_IOCTL_PRE:
+
+ switch (cmd) {
+ case FE_READ_SIGNAL_STRENGTH:
+ err = fe->ops.tuner_ops.get_rf_strength(fe, parg);
+ /* If no error occurs, prevent dvb-core from handling
+ * this IOCTL, otherwise return the error */
+ if (0 == err)
+ err = 1;
+ break;
+ }
+ break;
+
+ case DVB_FE_IOCTL_POST:
+ /* no post-ioctl handling required */
+ break;
+ }
+ return err;
+};
+
+static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+struct i2c_algorithm mxl111sf_i2c_algo = {
+ .master_xfer = mxl111sf_i2c_xfer,
+ .functionality = mxl111sf_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+ .algo_control = dummy_algo_control,
+#endif
+};
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties;
+static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties;
+
+static int mxl111sf_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct dvb_usb_device *d = NULL;
+
+ deb_adv("%s()\n", __func__);
+
+ if (((dvb_usb_mxl111sf_isoc) &&
+ (0 == dvb_usb_device_init(intf,
+ &mxl111sf_atsc_isoc_properties,
+ THIS_MODULE, &d, adapter_nr))) ||
+ 0 == dvb_usb_device_init(intf,
+ &mxl111sf_atsc_bulk_properties,
+ THIS_MODULE, &d, adapter_nr) || 0) {
+
+ struct mxl111sf_state *state = d->priv;
+ static u8 eeprom[256];
+ struct i2c_client c;
+ int ret;
+
+ ret = get_chip_info(state);
+ if (mxl_fail(ret))
+ err("failed to get chip info during probe");
+
+ mutex_init(&state->fe_lock);
+
+ if (state->chip_rev > MXL111SF_V6)
+ mxl111sf_config_pin_mux_modes(state,
+ PIN_MUX_TS_SPI_IN_MODE_1);
+
+ c.adapter = &d->i2c_adap;
+ c.addr = 0xa0 >> 1;
+
+ ret = tveeprom_read(&c, eeprom, sizeof(eeprom));
+ if (mxl_fail(ret))
+ return 0;
+ tveeprom_hauppauge_analog(&c, &state->tv,
+ (0x84 == eeprom[0xa0]) ?
+ eeprom + 0xa0 : eeprom + 0x80);
+#if 0
+ switch (state->tv.model) {
+ case 117001:
+ case 126001:
+ case 138001:
+ break;
+ default:
+ printk(KERN_WARNING "%s: warning: "
+ "unknown hauppauge model #%d\n",
+ __func__, state->tv.model);
+ }
+#endif
+ return 0;
+ }
+ err("Your device is not yet supported by this driver. "
+ "See kernellabs.com for more info");
+ return -EINVAL;
+}
+
+static struct usb_device_id mxl111sf_table[] = {
+/* 0 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601) }, /* ATSC */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602) }, /* + */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603) }, /* ATSC+ */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604) }, /* DVBT */
+/* 5 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609) }, /* ATSC IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a) }, /* + IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c) }, /* DVBT IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653) }, /* ATSC+ */
+/*10 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700) }, /* ATSC+ sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701) }, /* ATSC sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702) }, /* + sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703) }, /* ATSC+ sw */
+/*15 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704) }, /* DVBT sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753) }, /* ATSC+ sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763) }, /* ATSC+ no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764) }, /* DVBT no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853) }, /* ATSC+ sw */
+/*20 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854) }, /* DVBT sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863) }, /* ATSC+ no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864) }, /* DVBT no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3) }, /* ATSC+ sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4) }, /* DVBT sw */
+/*25 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3) }, /* ATSC+ no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4) }, /* DVBT no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff) }, /* ATSC+ */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612) }, /* + */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613) }, /* ATSC+ */
+/*30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a) }, /* + IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757) }, /* ATSC+DVBT sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767) }, /* ATSC+DVBT no */
+ {} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, mxl111sf_table);
+
+
+#define MXL111SF_EP6_BULK_STREAMING_CONFIG \
+ .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \
+ .stream = { \
+ .type = USB_BULK, \
+ .count = 5, \
+ .endpoint = 0x06, \
+ .u = { \
+ .bulk = { \
+ .buffersize = 8192, \
+ } \
+ } \
+ }
+
+/* FIXME */
+#define MXL111SF_EP6_ISOC_STREAMING_CONFIG \
+ .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \
+ .stream = { \
+ .type = USB_ISOC, \
+ .count = 5, \
+ .endpoint = 0x06, \
+ .u = { \
+ .isoc = { \
+ .framesperurb = 24, \
+ .framesize = 3072, \
+ .interval = 1, \
+ } \
+ } \
+ }
+
+#define MXL111SF_DEFAULT_DEVICE_PROPERTIES \
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
+ .usb_ctrl = DEVICE_SPECIFIC, \
+ /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t), \
+ EP6 BULK transfer (atsc/qam), \
+ use usb alt setting 2 for EP4 BULK transfer (dvb-t), \
+ EP6 ISOC transfer (atsc/qam), \
+ */ \
+ .power_ctrl = mxl111sf_power_ctrl, \
+ .i2c_algo = &mxl111sf_i2c_algo, \
+ .generic_bulk_ctrl_endpoint = MXL_EP2_REG_WRITE, \
+ .generic_bulk_ctrl_endpoint_response = MXL_EP1_REG_READ, \
+ .size_of_priv = sizeof(struct mxl111sf_state)
+
+static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = {
+ MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .fe_ioctl_override = mxl111sf_fe_ioctl_override,
+ .num_frontends = 1,
+ .fe = {{
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+
+ .frontend_attach = mxl111sf_lgdt3305_frontend_attach,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP6_BULK_STREAMING_CONFIG,
+ }},
+ },
+ },
+ .num_device_descs = 6,
+ .devices = {
+ { "Hauppauge 126xxx ATSC (bulk)",
+ { NULL },
+ { &mxl111sf_table[1], &mxl111sf_table[5],
+ NULL },
+ },
+ { "Hauppauge 117xxx ATSC (bulk)",
+ { NULL },
+ { &mxl111sf_table[12],
+ NULL },
+ },
+ { "Hauppauge 126xxx ATSC+ (bulk)",
+ { NULL },
+ { &mxl111sf_table[0], &mxl111sf_table[3],
+ &mxl111sf_table[7], &mxl111sf_table[9],
+ &mxl111sf_table[10], NULL },
+ },
+ { "Hauppauge 117xxx ATSC+ (bulk)",
+ { NULL },
+ { &mxl111sf_table[11], &mxl111sf_table[14],
+ &mxl111sf_table[16], &mxl111sf_table[17],
+ &mxl111sf_table[32], &mxl111sf_table[33],
+ NULL },
+ },
+ { "Hauppauge Mercury (tp-bulk)",
+ { NULL },
+ { &mxl111sf_table[19], &mxl111sf_table[21],
+ &mxl111sf_table[23], &mxl111sf_table[25],
+ &mxl111sf_table[27], NULL },
+ },
+ { "Hauppauge WinTV-Aero-M",
+ { NULL },
+ { &mxl111sf_table[29], &mxl111sf_table[31],
+ NULL },
+ },
+ }
+};
+
+static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties = {
+ MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .fe_ioctl_override = mxl111sf_fe_ioctl_override,
+ .num_frontends = 1,
+ .fe = {{
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+
+ .frontend_attach = mxl111sf_lgdt3305_frontend_attach,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP6_ISOC_STREAMING_CONFIG,
+ }},
+ },
+ },
+ .num_device_descs = 6,
+ .devices = {
+ { "Hauppauge 126xxx ATSC (isoc)",
+ { NULL },
+ { &mxl111sf_table[1], &mxl111sf_table[5],
+ NULL },
+ },
+ { "Hauppauge 117xxx ATSC (isoc)",
+ { NULL },
+ { &mxl111sf_table[12],
+ NULL },
+ },
+ { "Hauppauge 126xxx ATSC+ (isoc)",
+ { NULL },
+ { &mxl111sf_table[0], &mxl111sf_table[3],
+ &mxl111sf_table[7], &mxl111sf_table[9],
+ &mxl111sf_table[10], NULL },
+ },
+ { "Hauppauge 117xxx ATSC+ (isoc)",
+ { NULL },
+ { &mxl111sf_table[11], &mxl111sf_table[14],
+ &mxl111sf_table[16], &mxl111sf_table[17],
+ &mxl111sf_table[32], &mxl111sf_table[33],
+ NULL },
+ },
+ { "Hauppauge Mercury (tp-isoc)",
+ { NULL },
+ { &mxl111sf_table[19], &mxl111sf_table[21],
+ &mxl111sf_table[23], &mxl111sf_table[25],
+ &mxl111sf_table[27], NULL },
+ },
+ { "Hauppauge WinTV-Aero-M (tp-isoc)",
+ { NULL },
+ { &mxl111sf_table[29], &mxl111sf_table[31],
+ NULL },
+ },
+ }
+};
+
+static struct usb_driver mxl111sf_driver = {
+ .name = "dvb_usb_mxl111sf",
+ .probe = mxl111sf_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = mxl111sf_table,
+};
+
+static int __init mxl111sf_module_init(void)
+{
+ int result = usb_register(&mxl111sf_driver);
+ if (result) {
+ err("usb_register failed. Error number %d", result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit mxl111sf_module_exit(void)
+{
+ usb_deregister(&mxl111sf_driver);
+}
+
+module_init(mxl111sf_module_init);
+module_exit(mxl111sf_module_exit);
+
+MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.h b/drivers/media/dvb/dvb-usb/mxl111sf.h
new file mode 100644
index 0000000..5a2c7bb
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#ifndef _DVB_USB_MXL111SF_H_
+#define _DVB_USB_MXL111SF_H_
+
+#ifdef DVB_USB_LOG_PREFIX
+#undef DVB_USB_LOG_PREFIX
+#endif
+#define DVB_USB_LOG_PREFIX "mxl111sf"
+#include "dvb-usb.h"
+#include <media/tveeprom.h>
+
+#define MXL_EP1_REG_READ 1
+#define MXL_EP2_REG_WRITE 2
+#define MXL_EP3_INTERRUPT 3
+#define MXL_EP4_MPEG2 4
+#define MXL_EP5_I2S 5
+#define MXL_EP6_656 6
+#define MXL_EP6_MPEG2 6
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+enum mxl111sf_current_mode {
+ mxl_mode_dvbt = MXL_EP4_MPEG2,
+ mxl_mode_mh = MXL_EP5_I2S,
+ mxl_mode_atsc = MXL_EP6_MPEG2,
+};
+#endif
+
+enum mxl111sf_gpio_port_expander {
+ mxl111sf_gpio_hw,
+ mxl111sf_PCA9534,
+};
+
+struct mxl111sf_state {
+ struct dvb_usb_device *d;
+
+ enum mxl111sf_gpio_port_expander gpio_port_expander;
+ u8 port_expander_addr;
+
+ u8 chip_id;
+ u8 chip_ver;
+#define MXL111SF_V6 1
+#define MXL111SF_V8_100 2
+#define MXL111SF_V8_200 3
+ u8 chip_rev;
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+ enum mxl111sf_current_mode current_mode;
+#endif
+
+#define MXL_TUNER_MODE 0
+#define MXL_SOC_MODE 1
+#define MXL_DEV_MODE_MASK 0x01
+#if 1
+ int device_mode;
+#endif
+ /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t),
+ EP5 BULK transfer (atsc-mh),
+ EP6 BULK transfer (atsc/qam),
+ use usb alt setting 2 for EP4 BULK transfer (dvb-t),
+ EP5 ISOC transfer (atsc-mh),
+ EP6 ISOC transfer (atsc/qam),
+ */
+ int alt_mode;
+ int gpio_mode;
+ struct tveeprom tv;
+
+ struct mutex fe_lock;
+};
+
+struct mxl111sf_adap_state {
+ int alt_mode;
+ int gpio_mode;
+ int device_mode;
+ int ep6_clockphase;
+ int (*fe_init)(struct dvb_frontend *);
+ int (*fe_sleep)(struct dvb_frontend *);
+};
+
+int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data);
+int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data);
+
+struct mxl111sf_reg_ctrl_info {
+ u8 addr;
+ u8 mask;
+ u8 data;
+};
+
+int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
+ u8 addr, u8 mask, u8 data);
+int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+
+/* needed for hardware i2c functions in mxl111sf-i2c.c:
+ * mxl111sf_i2c_send_data / mxl111sf_i2c_get_data */
+int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
+ u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen);
+
+#define mxl_printk(kern, fmt, arg...) \
+ printk(kern "%s: " fmt "\n", __func__, ##arg)
+
+#define mxl_info(fmt, arg...) \
+ mxl_printk(KERN_INFO, fmt, ##arg)
+
+extern int dvb_usb_mxl111sf_debug;
+#define mxl_debug(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define MXL_I2C_DBG 0x04
+#define MXL_ADV_DBG 0x10
+#define mxl_debug_adv(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug & MXL_ADV_DBG) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug & MXL_I2C_DBG) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c_adv(fmt, arg...) \
+ if ((dvb_usb_mxl111sf_debug & (MXL_I2C_DBG | MXL_ADV_DBG)) == \
+ (MXL_I2C_DBG | MXL_ADV_DBG)) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* The following allows the mxl_fail() macro defined below to work
+ * in externel modules, such as mxl111sf-tuner.ko, even though
+ * dvb_usb_mxl111sf_debug is not defined within those modules */
+#ifdef __MXL111SF_TUNER_H__
+#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG
+#else
+#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug
+#endif
+
+#define mxl_fail(ret) \
+({ \
+ int __ret; \
+ __ret = (ret < 0); \
+ if ((__ret) && (MXL_ADV_DEBUG_ENABLED & MXL_ADV_DBG)) \
+ mxl_printk(KERN_ERR, "error %d on line %d", \
+ ret, __LINE__); \
+ __ret; \
+})
+
+#endif /* _DVB_USB_MXL111SF_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
index bc350e9..21384da 100644
--- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
@@ -166,6 +166,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
@@ -186,7 +188,7 @@
}
}
},
-
+ }},
.size_of_priv = sizeof(struct dibusb_state),
}
},
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index 2e4fab7..98fd9a6 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -263,10 +263,10 @@
static int opera1_frontend_attach(struct dvb_usb_adapter *d)
{
- if ((d->fe =
- dvb_attach(stv0299_attach, &opera1_stv0299_config,
- &d->dev->i2c_adap)) != NULL) {
- d->fe->ops.set_voltage = opera1_set_voltage;
+ d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config,
+ &d->dev->i2c_adap);
+ if ((d->fe_adap[0].fe) != NULL) {
+ d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage;
return 0;
}
info("not attached stv0299");
@@ -276,7 +276,7 @@
static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
{
dvb_attach(
- dvb_pll_attach, adap->fe, 0xc0>>1,
+ dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1,
&adap->dev->i2c_adap, DVB_PLL_OPERA1
);
return 0;
@@ -516,6 +516,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = opera1_frontend_attach,
.streaming_ctrl = opera1_streaming_ctrl,
.tuner_attach = opera1_tuner_attach,
@@ -535,6 +537,7 @@
}
}
},
+ }},
}
},
.num_device_descs = 1,
diff --git a/drivers/media/dvb/dvb-usb/pctv452e.c b/drivers/media/dvb/dvb-usb/pctv452e.c
new file mode 100644
index 0000000..f9aec5c
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/pctv452e.c
@@ -0,0 +1,1079 @@
+/*
+ * PCTV 452e DVB driver
+ *
+ * Copyright (c) 2006-2008 Dominik Kuhlen <dkuhlen@gmx.net>
+ *
+ * TT connect S2-3650-CI Common Interface support, MAC readout
+ * Copyright (C) 2008 Michael H. Schimek <mschimek@gmx.at>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/* dvb usb framework */
+#define DVB_USB_LOG_PREFIX "pctv452e"
+#include "dvb-usb.h"
+
+/* Demodulator */
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+/* Tuner */
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+/* FE Power */
+#include "lnbp22.h"
+
+#include "dvb_ca_en50221.h"
+#include "ttpci-eeprom.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define ISOC_INTERFACE_ALTERNATIVE 3
+
+#define SYNC_BYTE_OUT 0xaa
+#define SYNC_BYTE_IN 0x55
+
+/* guessed: (copied from ttusb-budget) */
+#define PCTV_CMD_RESET 0x15
+/* command to poll IR receiver */
+#define PCTV_CMD_IR 0x1b
+/* command to send I2C */
+#define PCTV_CMD_I2C 0x31
+
+#define I2C_ADDR_STB0899 (0xd0 >> 1)
+#define I2C_ADDR_STB6100 (0xc0 >> 1)
+#define I2C_ADDR_LNBP22 (0x10 >> 1)
+#define I2C_ADDR_24C16 (0xa0 >> 1)
+#define I2C_ADDR_24C64 (0xa2 >> 1)
+
+
+/* pctv452e sends us this amount of data for each issued usb-command */
+#define PCTV_ANSWER_LEN 64
+/* Wait up to 1000ms for device */
+#define PCTV_TIMEOUT 1000
+
+
+#define PCTV_LED_GPIO STB0899_GPIO01
+#define PCTV_LED_GREEN 0x82
+#define PCTV_LED_ORANGE 0x02
+
+#define ci_dbg(format, arg...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG DVB_USB_LOG_PREFIX \
+ ": " format "\n" , ## arg); \
+} while (0)
+
+enum {
+ TT3650_CMD_CI_TEST = 0x40,
+ TT3650_CMD_CI_RD_CTRL,
+ TT3650_CMD_CI_WR_CTRL,
+ TT3650_CMD_CI_RD_ATTR,
+ TT3650_CMD_CI_WR_ATTR,
+ TT3650_CMD_CI_RESET,
+ TT3650_CMD_CI_SET_VIDEO_PORT
+};
+
+
+static struct stb0899_postproc pctv45e_postproc[] = {
+ { PCTV_LED_GPIO, STB0899_GPIOPULLUP },
+ { 0, 0 }
+};
+
+/*
+ * stores all private variables for communication with the PCTV452e DVB-S2
+ */
+struct pctv452e_state {
+ struct dvb_ca_en50221 ca;
+ struct mutex ca_mutex;
+
+ u8 c; /* transaction counter, wraps around... */
+ u8 initialized; /* set to 1 if 0x15 has been sent */
+ u16 last_rc_key;
+};
+
+static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data,
+ unsigned int write_len, unsigned int read_len)
+{
+ struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
+ u8 buf[64];
+ u8 id;
+ unsigned int rlen;
+ int ret;
+
+ BUG_ON(NULL == data && 0 != (write_len | read_len));
+ BUG_ON(write_len > 64 - 4);
+ BUG_ON(read_len > 64 - 4);
+
+ id = state->c++;
+
+ buf[0] = SYNC_BYTE_OUT;
+ buf[1] = id;
+ buf[2] = cmd;
+ buf[3] = write_len;
+
+ memcpy(buf + 4, data, write_len);
+
+ rlen = (read_len > 0) ? 64 : 0;
+ ret = dvb_usb_generic_rw(d, buf, 4 + write_len,
+ buf, rlen, /* delay_ms */ 0);
+ if (0 != ret)
+ goto failed;
+
+ ret = -EIO;
+ if (SYNC_BYTE_IN != buf[0] || id != buf[1])
+ goto failed;
+
+ memcpy(data, buf + 4, read_len);
+
+ return 0;
+
+failed:
+ err("CI error %d; %02X %02X %02X -> %02X %02X %02X.",
+ ret, SYNC_BYTE_OUT, id, cmd, buf[0], buf[1], buf[2]);
+
+ return ret;
+}
+
+static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca,
+ u8 cmd, u8 *data, unsigned int write_len,
+ unsigned int read_len)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
+ int ret;
+
+ mutex_lock(&state->ca_mutex);
+ ret = tt3650_ci_msg(d, cmd, data, write_len, read_len);
+ mutex_unlock(&state->ca_mutex);
+
+ return ret;
+}
+
+static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot, int address)
+{
+ u8 buf[3];
+ int ret;
+
+ if (0 != slot)
+ return -EINVAL;
+
+ buf[0] = (address >> 8) & 0x0F;
+ buf[1] = address;
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3);
+
+ ci_dbg("%s %04x -> %d 0x%02x",
+ __func__, address, ret, buf[2]);
+
+ if (ret < 0)
+ return ret;
+
+ return buf[2];
+}
+
+static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot, int address, u8 value)
+{
+ u8 buf[3];
+
+ ci_dbg("%s %d 0x%04x 0x%02x",
+ __func__, slot, address, value);
+
+ if (0 != slot)
+ return -EINVAL;
+
+ buf[0] = (address >> 8) & 0x0F;
+ buf[1] = address;
+ buf[2] = value;
+
+ return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3);
+}
+
+static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address)
+{
+ u8 buf[2];
+ int ret;
+
+ if (0 != slot)
+ return -EINVAL;
+
+ buf[0] = address & 3;
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2);
+
+ ci_dbg("%s 0x%02x -> %d 0x%02x",
+ __func__, address, ret, buf[1]);
+
+ if (ret < 0)
+ return ret;
+
+ return buf[1];
+}
+
+static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address,
+ u8 value)
+{
+ u8 buf[2];
+
+ ci_dbg("%s %d 0x%02x 0x%02x",
+ __func__, slot, address, value);
+
+ if (0 != slot)
+ return -EINVAL;
+
+ buf[0] = address;
+ buf[1] = value;
+
+ return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2);
+}
+
+static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca,
+ int slot,
+ int enable)
+{
+ u8 buf[1];
+ int ret;
+
+ ci_dbg("%s %d %d", __func__, slot, enable);
+
+ if (0 != slot)
+ return -EINVAL;
+
+ enable = !!enable;
+ buf[0] = enable;
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
+ if (ret < 0)
+ return ret;
+
+ if (enable != buf[0]) {
+ err("CI not %sabled.", enable ? "en" : "dis");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ return tt3650_ci_set_video_port(ca, slot, /* enable */ 0);
+}
+
+static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ return tt3650_ci_set_video_port(ca, slot, /* enable */ 1);
+}
+
+static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
+ u8 buf[1];
+ int ret;
+
+ ci_dbg("%s %d", __func__, slot);
+
+ if (0 != slot)
+ return -EINVAL;
+
+ buf[0] = 0;
+
+ mutex_lock(&state->ca_mutex);
+
+ ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
+ if (0 != ret)
+ goto failed;
+
+ msleep(500);
+
+ buf[0] = 1;
+
+ ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
+ if (0 != ret)
+ goto failed;
+
+ msleep(500);
+
+ buf[0] = 0; /* FTA */
+
+ ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
+
+ failed:
+ mutex_unlock(&state->ca_mutex);
+
+ return ret;
+}
+
+static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca,
+ int slot,
+ int open)
+{
+ u8 buf[1];
+ int ret;
+
+ if (0 != slot)
+ return -EINVAL;
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1);
+ if (0 != ret)
+ return ret;
+
+ if (1 == buf[0])
+ return DVB_CA_EN50221_POLL_CAM_PRESENT |
+ DVB_CA_EN50221_POLL_CAM_READY;
+
+ return 0;
+
+}
+
+static void tt3650_ci_uninit(struct dvb_usb_device *d)
+{
+ struct pctv452e_state *state;
+
+ ci_dbg("%s", __func__);
+
+ if (NULL == d)
+ return;
+
+ state = (struct pctv452e_state *)d->priv;
+ if (NULL == state)
+ return;
+
+ if (NULL == state->ca.data)
+ return;
+
+ /* Error ignored. */
+ tt3650_ci_set_video_port(&state->ca, /* slot */ 0, /* enable */ 0);
+
+ dvb_ca_en50221_release(&state->ca);
+
+ memset(&state->ca, 0, sizeof(state->ca));
+}
+
+static int tt3650_ci_init(struct dvb_usb_adapter *a)
+{
+ struct dvb_usb_device *d = a->dev;
+ struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
+ int ret;
+
+ ci_dbg("%s", __func__);
+
+ mutex_init(&state->ca_mutex);
+
+ state->ca.owner = THIS_MODULE;
+ state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem;
+ state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem;
+ state->ca.read_cam_control = tt3650_ci_read_cam_control;
+ state->ca.write_cam_control = tt3650_ci_write_cam_control;
+ state->ca.slot_reset = tt3650_ci_slot_reset;
+ state->ca.slot_shutdown = tt3650_ci_slot_shutdown;
+ state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable;
+ state->ca.poll_slot_status = tt3650_ci_poll_slot_status;
+ state->ca.data = d;
+
+ ret = dvb_ca_en50221_init(&a->dvb_adap,
+ &state->ca,
+ /* flags */ 0,
+ /* n_slots */ 1);
+ if (0 != ret) {
+ err("Cannot initialize CI: Error %d.", ret);
+ memset(&state->ca, 0, sizeof(state->ca));
+ return ret;
+ }
+
+ info("CI initialized.");
+
+ return 0;
+}
+
+#define CMD_BUFFER_SIZE 0x28
+static int pctv452e_i2c_msg(struct dvb_usb_device *d, u8 addr,
+ const u8 *snd_buf, u8 snd_len,
+ u8 *rcv_buf, u8 rcv_len)
+{
+ struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
+ u8 buf[64];
+ u8 id;
+ int ret;
+
+ id = state->c++;
+
+ ret = -EINVAL;
+ if (snd_len > 64 - 7 || rcv_len > 64 - 7)
+ goto failed;
+
+ buf[0] = SYNC_BYTE_OUT;
+ buf[1] = id;
+ buf[2] = PCTV_CMD_I2C;
+ buf[3] = snd_len + 3;
+ buf[4] = addr << 1;
+ buf[5] = snd_len;
+ buf[6] = rcv_len;
+
+ memcpy(buf + 7, snd_buf, snd_len);
+
+ ret = dvb_usb_generic_rw(d, buf, 7 + snd_len,
+ buf, /* rcv_len */ 64,
+ /* delay_ms */ 0);
+ if (ret < 0)
+ goto failed;
+
+ /* TT USB protocol error. */
+ ret = -EIO;
+ if (SYNC_BYTE_IN != buf[0] || id != buf[1])
+ goto failed;
+
+ /* I2C device didn't respond as expected. */
+ ret = -EREMOTEIO;
+ if (buf[5] < snd_len || buf[6] < rcv_len)
+ goto failed;
+
+ memcpy(rcv_buf, buf + 7, rcv_len);
+
+ return rcv_len;
+
+failed:
+ err("I2C error %d; %02X %02X %02X %02X %02X -> "
+ "%02X %02X %02X %02X %02X.",
+ ret, SYNC_BYTE_OUT, id, addr << 1, snd_len, rcv_len,
+ buf[0], buf[1], buf[4], buf[5], buf[6]);
+
+ return ret;
+}
+
+static int pctv452e_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msg,
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adapter);
+ int i;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ u8 addr, snd_len, rcv_len, *snd_buf, *rcv_buf;
+ int ret;
+
+ if (msg[i].flags & I2C_M_RD) {
+ addr = msg[i].addr;
+ snd_buf = NULL;
+ snd_len = 0;
+ rcv_buf = msg[i].buf;
+ rcv_len = msg[i].len;
+ } else {
+ addr = msg[i].addr;
+ snd_buf = msg[i].buf;
+ snd_len = msg[i].len;
+ rcv_buf = NULL;
+ rcv_len = 0;
+ }
+
+ ret = pctv452e_i2c_msg(d, addr, snd_buf, snd_len, rcv_buf,
+ rcv_len);
+ if (ret < rcv_len)
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+static u32 pctv452e_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i)
+{
+ struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
+ u8 b0[] = { 0xaa, 0, PCTV_CMD_RESET, 1, 0 };
+ u8 rx[PCTV_ANSWER_LEN];
+ int ret;
+
+ info("%s: %d\n", __func__, i);
+
+ if (!i)
+ return 0;
+
+ if (state->initialized)
+ return 0;
+
+ /* hmm where shoud this should go? */
+ ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE);
+ if (ret != 0)
+ info("%s: Warning set interface returned: %d\n",
+ __func__, ret);
+
+ /* this is a one-time initialization, dont know where to put */
+ b0[1] = state->c++;
+ /* reset board */
+ ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0);
+ if (ret)
+ return ret;
+
+ b0[1] = state->c++;
+ b0[4] = 1;
+ /* reset board (again?) */
+ ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0);
+ if (ret)
+ return ret;
+
+ state->initialized = 1;
+
+ return 0;
+}
+
+static int pctv452e_rc_query(struct dvb_usb_device *d)
+{
+ struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
+ u8 b[CMD_BUFFER_SIZE];
+ u8 rx[PCTV_ANSWER_LEN];
+ int ret, i;
+ u8 id = state->c++;
+
+ /* prepare command header */
+ b[0] = SYNC_BYTE_OUT;
+ b[1] = id;
+ b[2] = PCTV_CMD_IR;
+ b[3] = 0;
+
+ /* send ir request */
+ ret = dvb_usb_generic_rw(d, b, 4, rx, PCTV_ANSWER_LEN, 0);
+ if (ret != 0)
+ return ret;
+
+ if (debug > 3) {
+ info("%s: read: %2d: %02x %02x %02x: ", __func__,
+ ret, rx[0], rx[1], rx[2]);
+ for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++)
+ info(" %02x", rx[i+3]);
+
+ info("\n");
+ }
+
+ if ((rx[3] == 9) && (rx[12] & 0x01)) {
+ /* got a "press" event */
+ state->last_rc_key = (rx[7] << 8) | rx[6];
+ if (debug > 2)
+ info("%s: cmd=0x%02x sys=0x%02x\n",
+ __func__, rx[6], rx[7]);
+
+ rc_keydown(d->rc_dev, state->last_rc_key, 0);
+ } else if (state->last_rc_key) {
+ rc_keyup(d->rc_dev);
+ state->last_rc_key = 0;
+ }
+
+ return 0;
+}
+
+static int pctv452e_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+{
+ const u8 mem_addr[] = { 0x1f, 0xcc };
+ u8 encoded_mac[20];
+ int ret;
+
+ ret = -EAGAIN;
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ goto failed;
+
+ ret = pctv452e_i2c_msg(d, I2C_ADDR_24C16,
+ mem_addr + 1, /* snd_len */ 1,
+ encoded_mac, /* rcv_len */ 20);
+ if (-EREMOTEIO == ret)
+ /* Caution! A 24C16 interprets 0xA2 0x1F 0xCC as a
+ byte write if /WC is low. */
+ ret = pctv452e_i2c_msg(d, I2C_ADDR_24C64,
+ mem_addr, 2,
+ encoded_mac, 20);
+
+ mutex_unlock(&d->i2c_mutex);
+
+ if (20 != ret)
+ goto failed;
+
+ ret = ttpci_eeprom_decode_mac(mac, encoded_mac);
+ if (0 != ret)
+ goto failed;
+
+ return 0;
+
+failed:
+ memset(mac, 0, 6);
+
+ return ret;
+}
+
+static const struct stb0899_s1_reg pctv452e_init_dev[] = {
+ { STB0899_DISCNTRL1, 0x26 },
+ { STB0899_DISCNTRL2, 0x80 },
+ { STB0899_DISRX_ST0, 0x04 },
+ { STB0899_DISRX_ST1, 0x20 },
+ { STB0899_DISPARITY, 0x00 },
+ { STB0899_DISFIFO, 0x00 },
+ { STB0899_DISF22, 0x99 },
+ { STB0899_DISF22RX, 0x85 }, /* 0xa8 */
+ { STB0899_ACRPRESC, 0x11 },
+ { STB0899_ACRDIV1, 0x0a },
+ { STB0899_ACRDIV2, 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG, 0x00 },
+ { STB0899_MODECFG, 0x00 }, /* Inversion */
+ { STB0899_IRQMSK_3, 0xf3 },
+ { STB0899_IRQMSK_2, 0xfc },
+ { STB0899_IRQMSK_1, 0xff },
+ { STB0899_IRQMSK_0, 0xff },
+ { STB0899_I2CCFG, 0x88 },
+ { STB0899_I2CRPT, 0x58 },
+ { STB0899_GPIO00CFG, 0x82 },
+ { STB0899_GPIO01CFG, 0x82 }, /* LED: 0x02 green, 0x82 orange */
+ { STB0899_GPIO02CFG, 0x82 },
+ { STB0899_GPIO03CFG, 0x82 },
+ { STB0899_GPIO04CFG, 0x82 },
+ { STB0899_GPIO05CFG, 0x82 },
+ { STB0899_GPIO06CFG, 0x82 },
+ { STB0899_GPIO07CFG, 0x82 },
+ { STB0899_GPIO08CFG, 0x82 },
+ { STB0899_GPIO09CFG, 0x82 },
+ { STB0899_GPIO10CFG, 0x82 },
+ { STB0899_GPIO11CFG, 0x82 },
+ { STB0899_GPIO12CFG, 0x82 },
+ { STB0899_GPIO13CFG, 0x82 },
+ { STB0899_GPIO14CFG, 0x82 },
+ { STB0899_GPIO15CFG, 0x82 },
+ { STB0899_GPIO16CFG, 0x82 },
+ { STB0899_GPIO17CFG, 0x82 },
+ { STB0899_GPIO18CFG, 0x82 },
+ { STB0899_GPIO19CFG, 0x82 },
+ { STB0899_GPIO20CFG, 0x82 },
+ { STB0899_SDATCFG, 0xb8 },
+ { STB0899_SCLTCFG, 0xba },
+ { STB0899_AGCRFCFG, 0x1c }, /* 0x11 DVB-S; 0x1c DVB-S2 (1c, rjkm) */
+ { STB0899_GPIO22, 0x82 },
+ { STB0899_GPIO21, 0x91 },
+ { STB0899_DIRCLKCFG, 0x82 },
+ { STB0899_CLKOUT27CFG, 0x7e },
+ { STB0899_STDBYCFG, 0x82 },
+ { STB0899_CS0CFG, 0x82 },
+ { STB0899_CS1CFG, 0x82 },
+ { STB0899_DISEQCOCFG, 0x20 },
+ { STB0899_NCOARSE, 0x15 }, /* 0x15 27Mhz, F/3 198MHz, F/6 108MHz */
+ { STB0899_SYNTCTRL, 0x00 }, /* 0x00 CLKI, 0x02 XTALI */
+ { STB0899_FILTCTRL, 0x00 },
+ { STB0899_SYSCTRL, 0x00 },
+ { STB0899_STOPCLK1, 0x20 }, /* orig: 0x00 budget-ci: 0x20 */
+ { STB0899_STOPCLK2, 0x00 },
+ { STB0899_INTBUFCTRL, 0x0a },
+ { STB0899_AGC2I1, 0x00 },
+ { STB0899_AGC2I2, 0x00 },
+ { STB0899_AGCIQIN, 0x00 },
+ { STB0899_TSTRES, 0x40 }, /* rjkm */
+ { 0xffff, 0xff },
+};
+
+static const struct stb0899_s1_reg pctv452e_init_s1_demod[] = {
+ { STB0899_DEMOD, 0x00 },
+ { STB0899_RCOMPC, 0xc9 },
+ { STB0899_AGC1CN, 0x01 },
+ { STB0899_AGC1REF, 0x10 },
+ { STB0899_RTC, 0x23 },
+ { STB0899_TMGCFG, 0x4e },
+ { STB0899_AGC2REF, 0x34 },
+ { STB0899_TLSR, 0x84 },
+ { STB0899_CFD, 0xf7 },
+ { STB0899_ACLC, 0x87 },
+ { STB0899_BCLC, 0x94 },
+ { STB0899_EQON, 0x41 },
+ { STB0899_LDT, 0xf1 },
+ { STB0899_LDT2, 0xe3 },
+ { STB0899_EQUALREF, 0xb4 },
+ { STB0899_TMGRAMP, 0x10 },
+ { STB0899_TMGTHD, 0x30 },
+ { STB0899_IDCCOMP, 0xfd },
+ { STB0899_QDCCOMP, 0xff },
+ { STB0899_POWERI, 0x0c },
+ { STB0899_POWERQ, 0x0f },
+ { STB0899_RCOMP, 0x6c },
+ { STB0899_AGCIQIN, 0x80 },
+ { STB0899_AGC2I1, 0x06 },
+ { STB0899_AGC2I2, 0x00 },
+ { STB0899_TLIR, 0x30 },
+ { STB0899_RTF, 0x7f },
+ { STB0899_DSTATUS, 0x00 },
+ { STB0899_LDI, 0xbc },
+ { STB0899_CFRM, 0xea },
+ { STB0899_CFRL, 0x31 },
+ { STB0899_NIRM, 0x2b },
+ { STB0899_NIRL, 0x80 },
+ { STB0899_ISYMB, 0x1d },
+ { STB0899_QSYMB, 0xa6 },
+ { STB0899_SFRH, 0x2f },
+ { STB0899_SFRM, 0x68 },
+ { STB0899_SFRL, 0x40 },
+ { STB0899_SFRUPH, 0x2f },
+ { STB0899_SFRUPM, 0x68 },
+ { STB0899_SFRUPL, 0x40 },
+ { STB0899_EQUAI1, 0x02 },
+ { STB0899_EQUAQ1, 0xff },
+ { STB0899_EQUAI2, 0x04 },
+ { STB0899_EQUAQ2, 0x05 },
+ { STB0899_EQUAI3, 0x02 },
+ { STB0899_EQUAQ3, 0xfd },
+ { STB0899_EQUAI4, 0x03 },
+ { STB0899_EQUAQ4, 0x07 },
+ { STB0899_EQUAI5, 0x08 },
+ { STB0899_EQUAQ5, 0xf5 },
+ { STB0899_DSTATUS2, 0x00 },
+ { STB0899_VSTATUS, 0x00 },
+ { STB0899_VERROR, 0x86 },
+ { STB0899_IQSWAP, 0x2a },
+ { STB0899_ECNT1M, 0x00 },
+ { STB0899_ECNT1L, 0x00 },
+ { STB0899_ECNT2M, 0x00 },
+ { STB0899_ECNT2L, 0x00 },
+ { STB0899_ECNT3M, 0x0a },
+ { STB0899_ECNT3L, 0xad },
+ { STB0899_FECAUTO1, 0x06 },
+ { STB0899_FECM, 0x01 },
+ { STB0899_VTH12, 0xb0 },
+ { STB0899_VTH23, 0x7a },
+ { STB0899_VTH34, 0x58 },
+ { STB0899_VTH56, 0x38 },
+ { STB0899_VTH67, 0x34 },
+ { STB0899_VTH78, 0x24 },
+ { STB0899_PRVIT, 0xff },
+ { STB0899_VITSYNC, 0x19 },
+ { STB0899_RSULC, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC, 0x42 },
+ { STB0899_RSLLC, 0x41 },
+ { STB0899_TSLPL, 0x12 },
+ { STB0899_TSCFGH, 0x0c },
+ { STB0899_TSCFGM, 0x00 },
+ { STB0899_TSCFGL, 0x00 },
+ { STB0899_TSOUT, 0x69 }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL, 0x00 },
+ { STB0899_TSINHDELH, 0x02 },
+ { STB0899_TSINHDELM, 0x00 },
+ { STB0899_TSINHDELL, 0x00 },
+ { STB0899_TSLLSTKM, 0x1b },
+ { STB0899_TSLLSTKL, 0xb3 },
+ { STB0899_TSULSTKM, 0x00 },
+ { STB0899_TSULSTKL, 0x00 },
+ { STB0899_PCKLENUL, 0xbc },
+ { STB0899_PCKLENLL, 0xcc },
+ { STB0899_RSPCKLEN, 0xbd },
+ { STB0899_TSSTATUS, 0x90 },
+ { STB0899_ERRCTRL1, 0xb6 },
+ { STB0899_ERRCTRL2, 0x95 },
+ { STB0899_ERRCTRL3, 0x8d },
+ { STB0899_DMONMSK1, 0x27 },
+ { STB0899_DMONMSK0, 0x03 },
+ { STB0899_DEMAPVIT, 0x5c },
+ { STB0899_PLPARM, 0x19 },
+ { STB0899_PDELCTRL, 0x48 },
+ { STB0899_PDELCTRL2, 0x00 },
+ { STB0899_BBHCTRL1, 0x00 },
+ { STB0899_BBHCTRL2, 0x00 },
+ { STB0899_HYSTTHRESH, 0x77 },
+ { STB0899_MATCSTM, 0x00 },
+ { STB0899_MATCSTL, 0x00 },
+ { STB0899_UPLCSTM, 0x00 },
+ { STB0899_UPLCSTL, 0x00 },
+ { STB0899_DFLCSTM, 0x00 },
+ { STB0899_DFLCSTL, 0x00 },
+ { STB0899_SYNCCST, 0x00 },
+ { STB0899_SYNCDCSTM, 0x00 },
+ { STB0899_SYNCDCSTL, 0x00 },
+ { STB0899_ISI_ENTRY, 0x00 },
+ { STB0899_ISI_BIT_EN, 0x00 },
+ { STB0899_MATSTRM, 0xf0 },
+ { STB0899_MATSTRL, 0x02 },
+ { STB0899_UPLSTRM, 0x45 },
+ { STB0899_UPLSTRL, 0x60 },
+ { STB0899_DFLSTRM, 0xe3 },
+ { STB0899_DFLSTRL, 0x00 },
+ { STB0899_SYNCSTR, 0x47 },
+ { STB0899_SYNCDSTRM, 0x05 },
+ { STB0899_SYNCDSTRL, 0x18 },
+ { STB0899_CFGPDELSTATUS1, 0x19 },
+ { STB0899_CFGPDELSTATUS2, 0x2b },
+ { STB0899_BBFERRORM, 0x00 },
+ { STB0899_BBFERRORL, 0x01 },
+ { STB0899_UPKTERRORM, 0x00 },
+ { STB0899_UPKTERRORL, 0x00 },
+ { 0xffff, 0xff },
+};
+
+static struct stb0899_config stb0899_config = {
+ .init_dev = pctv452e_init_dev,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = pctv452e_init_s1_demod,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .demod_address = I2C_ADDR_STB0899, /* I2C Address */
+ .block_sync_mode = STB0899_SYNC_FORCED, /* ? */
+
+ .xtal_freq = 27000000, /* Assume Hz ? */
+ .inversion = IQ_SWAP_ON, /* ? */
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .ts_output_mode = 0, /* Use parallel mode */
+ .clock_polarity = 0,
+ .data_clk_parity = 0,
+ .fec_mode = 0,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL,
+
+ /* helper for switching LED green/orange */
+ .postproc = pctv45e_postproc
+};
+
+static struct stb6100_config stb6100_config = {
+ .tuner_address = I2C_ADDR_STB6100,
+ .refclock = 27000000
+};
+
+
+static struct i2c_algorithm pctv452e_i2c_algo = {
+ .master_xfer = pctv452e_i2c_xfer,
+ .functionality = pctv452e_i2c_func
+};
+
+static int pctv452e_frontend_attach(struct dvb_usb_adapter *a)
+{
+ struct usb_device_id *id;
+
+ a->fe_adap[0].fe = dvb_attach(stb0899_attach, &stb0899_config,
+ &a->dev->i2c_adap);
+ if (!a->fe_adap[0].fe)
+ return -ENODEV;
+ if ((dvb_attach(lnbp22_attach, a->fe_adap[0].fe,
+ &a->dev->i2c_adap)) == 0)
+ err("Cannot attach lnbp22\n");
+
+ id = a->dev->desc->warm_ids[0];
+ if (USB_VID_TECHNOTREND == id->idVendor
+ && USB_PID_TECHNOTREND_CONNECT_S2_3650_CI == id->idProduct)
+ /* Error ignored. */
+ tt3650_ci_init(a);
+
+ return 0;
+}
+
+static int pctv452e_tuner_attach(struct dvb_usb_adapter *a)
+{
+ if (!a->fe_adap[0].fe)
+ return -ENODEV;
+ if (dvb_attach(stb6100_attach, a->fe_adap[0].fe, &stb6100_config,
+ &a->dev->i2c_adap) == 0) {
+ err("%s failed\n", __func__);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct usb_device_id pctv452e_usb_table[] = {
+ {USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_452E)},
+ {USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_CONNECT_S2_3600)},
+ {USB_DEVICE(USB_VID_TECHNOTREND,
+ USB_PID_TECHNOTREND_CONNECT_S2_3650_CI)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, pctv452e_usb_table);
+
+static struct dvb_usb_device_properties pctv452e_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */
+ .usb_ctrl = DEVICE_SPECIFIC,
+
+ .size_of_priv = sizeof(struct pctv452e_state),
+
+ .power_ctrl = pctv452e_power_ctrl,
+
+ .rc.core = {
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .allowed_protos = RC_TYPE_UNKNOWN,
+ .rc_query = pctv452e_rc_query,
+ .rc_interval = 100,
+ },
+
+ .num_adapters = 1,
+ .adapter = {{
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = pctv452e_frontend_attach,
+ .tuner_attach = pctv452e_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_ISOC,
+ .count = 4,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1
+ }
+ }
+ },
+ } },
+ } },
+
+ .i2c_algo = &pctv452e_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 1, /* allow generice rw function */
+
+ .num_device_descs = 1,
+ .devices = {
+ { .name = "PCTV HDTV USB",
+ .cold_ids = { NULL, NULL }, /* this is a warm only device */
+ .warm_ids = { &pctv452e_usb_table[0], NULL }
+ },
+ { 0 },
+ }
+};
+
+static struct dvb_usb_device_properties tt_connect_s2_3600_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */
+ .usb_ctrl = DEVICE_SPECIFIC,
+
+ .size_of_priv = sizeof(struct pctv452e_state),
+
+ .power_ctrl = pctv452e_power_ctrl,
+ .read_mac_address = pctv452e_read_mac_address,
+
+ .rc.core = {
+ .rc_codes = RC_MAP_TT_1500,
+ .allowed_protos = RC_TYPE_UNKNOWN,
+ .rc_query = pctv452e_rc_query,
+ .rc_interval = 100,
+ },
+
+ .num_adapters = 1,
+ .adapter = {{
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = pctv452e_frontend_attach,
+ .tuner_attach = pctv452e_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_ISOC,
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1
+ }
+ }
+ },
+
+ } },
+ } },
+
+ .i2c_algo = &pctv452e_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 1, /* allow generic rw function*/
+
+ .num_device_descs = 2,
+ .devices = {
+ { .name = "Technotrend TT Connect S2-3600",
+ .cold_ids = { NULL, NULL }, /* this is a warm only device */
+ .warm_ids = { &pctv452e_usb_table[1], NULL }
+ },
+ { .name = "Technotrend TT Connect S2-3650-CI",
+ .cold_ids = { NULL, NULL },
+ .warm_ids = { &pctv452e_usb_table[2], NULL }
+ },
+ { 0 },
+ }
+};
+
+static void pctv452e_usb_disconnect(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+
+ tt3650_ci_uninit(d);
+ dvb_usb_device_exit(intf);
+}
+
+static int pctv452e_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ if (0 == dvb_usb_device_init(intf, &pctv452e_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &tt_connect_s2_3600_properties,
+ THIS_MODULE, NULL, adapter_nr))
+ return 0;
+
+ return -ENODEV;
+}
+
+static struct usb_driver pctv452e_usb_driver = {
+ .name = "pctv452e",
+ .probe = pctv452e_usb_probe,
+ .disconnect = pctv452e_usb_disconnect,
+ .id_table = pctv452e_usb_table,
+};
+
+static int __init pctv452e_usb_init(void)
+{
+ int ret = usb_register(&pctv452e_usb_driver);
+ if (ret)
+ err("%s: usb_register failed! Error %d", __FILE__, ret);
+
+ return ret;
+}
+
+static void __exit pctv452e_usb_exit(void)
+{
+ usb_deregister(&pctv452e_usb_driver);
+}
+
+module_init(pctv452e_usb_init);
+module_exit(pctv452e_usb_exit);
+
+MODULE_AUTHOR("Dominik Kuhlen <dkuhlen@gmx.net>");
+MODULE_AUTHOR("Andre Weidemann <Andre.Weidemann@web.de>");
+MODULE_AUTHOR("Michael H. Schimek <mschimek@gmx.at>");
+MODULE_DESCRIPTION("Pinnacle PCTV HDTV USB DVB / TT connect S2-3600 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c
index 473b95e..0998fe9 100644
--- a/drivers/media/dvb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/dvb/dvb-usb/technisat-usb2.c
@@ -292,7 +292,7 @@
{
struct technisat_usb2_state *state =
container_of(work, struct technisat_usb2_state, green_led_work.work);
- struct dvb_frontend *fe = state->dev->adapter[0].fe;
+ struct dvb_frontend *fe = state->dev->adapter[0].fe_adap[0].fe;
if (state->power_state == 0)
goto schedule;
@@ -505,14 +505,14 @@
struct usb_device *udev = a->dev->udev;
int ret;
- a->fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config,
+ a->fe_adap[0].fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config,
&a->dev->i2c_adap, STV090x_DEMODULATOR_0);
- if (a->fe) {
+ if (a->fe_adap[0].fe) {
struct stv6110x_devctl *ctl;
ctl = dvb_attach(stv6110x_attach,
- a->fe,
+ a->fe_adap[0].fe,
&technisat_usb2_stv6110x_config,
&a->dev->i2c_adap);
@@ -532,8 +532,8 @@
/* call the init function once to initialize
tuner's clock output divider and demod's
master clock */
- if (a->fe->ops.init)
- a->fe->ops.init(a->fe);
+ if (a->fe_adap[0].fe->ops.init)
+ a->fe_adap[0].fe->ops.init(a->fe_adap[0].fe);
if (mutex_lock_interruptible(&a->dev->i2c_mutex) < 0)
return -EAGAIN;
@@ -548,20 +548,20 @@
if (ret != 0)
err("could not set IF_CLK to external");
- a->fe->ops.set_voltage = technisat_usb2_set_voltage;
+ a->fe_adap[0].fe->ops.set_voltage = technisat_usb2_set_voltage;
/* if everything was successful assign a nice name to the frontend */
- strlcpy(a->fe->ops.info.name, a->dev->desc->name,
- sizeof(a->fe->ops.info.name));
+ strlcpy(a->fe_adap[0].fe->ops.info.name, a->dev->desc->name,
+ sizeof(a->fe_adap[0].fe->ops.info.name));
} else {
- dvb_frontend_detach(a->fe);
- a->fe = NULL;
+ dvb_frontend_detach(a->fe_adap[0].fe);
+ a->fe_adap[0].fe = NULL;
}
}
technisat_usb2_set_led_timer(a->dev, 1, 1);
- return a->fe == NULL ? -ENODEV : 0;
+ return a->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
/* Remote control */
@@ -697,6 +697,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = technisat_usb2_frontend_attach,
.stream = {
@@ -711,7 +713,7 @@
}
}
},
-
+ }},
.size_of_priv = 0,
},
},
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
index 0d4709f..ea4eab8 100644
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -30,18 +30,43 @@
#include "tda826x.h"
#include "tda10086.h"
#include "tda1002x.h"
+#include "tda10048.h"
#include "tda827x.h"
#include "lnbp21.h"
+/* CA */
+#include "dvb_ca_en50221.h"
/* debug */
static int dvb_usb_ttusb2_debug;
#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args)
module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
+static int dvb_usb_ttusb2_debug_ci;
+module_param_named(debug_ci,dvb_usb_ttusb2_debug_ci, int, 0644);
+MODULE_PARM_DESC(debug_ci, "set debugging ci." DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+#define ci_dbg(format, arg...) \
+do { \
+ if (dvb_usb_ttusb2_debug_ci) \
+ printk(KERN_DEBUG DVB_USB_LOG_PREFIX \
+ ": %s " format "\n" , __func__, ## arg); \
+} while (0)
+
+enum {
+ TT3650_CMD_CI_TEST = 0x40,
+ TT3650_CMD_CI_RD_CTRL,
+ TT3650_CMD_CI_WR_CTRL,
+ TT3650_CMD_CI_RD_ATTR,
+ TT3650_CMD_CI_WR_ATTR,
+ TT3650_CMD_CI_RESET,
+ TT3650_CMD_CI_SET_VIDEO_PORT
+};
+
struct ttusb2_state {
+ struct dvb_ca_en50221 ca;
+ struct mutex ca_mutex;
u8 id;
u16 last_rc_key;
};
@@ -78,11 +103,260 @@
return 0;
}
+/* ci */
+static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len)
+{
+ int ret;
+ u8 rx[60];/* (64 -4) */
+ ret = ttusb2_msg(d, cmd, data, write_len, rx, read_len);
+ if (!ret)
+ memcpy(data, rx, read_len);
+ return ret;
+}
+
+static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len)
+{
+ struct dvb_usb_device *d = ca->data;
+ struct ttusb2_state *state = d->priv;
+ int ret;
+
+ mutex_lock(&state->ca_mutex);
+ ret = tt3650_ci_msg(d, cmd, data, write_len, read_len);
+ mutex_unlock(&state->ca_mutex);
+
+ return ret;
+}
+
+static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+ u8 buf[3];
+ int ret = 0;
+
+ if (slot)
+ return -EINVAL;
+
+ buf[0] = (address >> 8) & 0x0F;
+ buf[1] = address;
+
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3);
+
+ ci_dbg("%04x -> %d 0x%02x", address, ret, buf[2]);
+
+ if (ret < 0)
+ return ret;
+
+ return buf[2];
+}
+
+static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+ u8 buf[3];
+
+ ci_dbg("%d 0x%04x 0x%02x", slot, address, value);
+
+ if (slot)
+ return -EINVAL;
+
+ buf[0] = (address >> 8) & 0x0F;
+ buf[1] = address;
+ buf[2] = value;
+
+ return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3);
+}
+
+static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+ u8 buf[2];
+ int ret;
+
+ if (slot)
+ return -EINVAL;
+
+ buf[0] = address & 3;
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2);
+
+ ci_dbg("0x%02x -> %d 0x%02x", address, ret, buf[1]);
+
+ if (ret < 0)
+ return ret;
+
+ return buf[1];
+}
+
+static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+ u8 buf[2];
+
+ ci_dbg("%d 0x%02x 0x%02x", slot, address, value);
+
+ if (slot)
+ return -EINVAL;
+
+ buf[0] = address;
+ buf[1] = value;
+
+ return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2);
+}
+
+static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, int slot, int enable)
+{
+ u8 buf[1];
+ int ret;
+
+ ci_dbg("%d %d", slot, enable);
+
+ if (slot)
+ return -EINVAL;
+
+ buf[0] = enable;
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
+ if (ret < 0)
+ return ret;
+
+ if (enable != buf[0]) {
+ err("CI not %sabled.", enable ? "en" : "dis");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ return tt3650_ci_set_video_port(ca, slot, 0);
+}
+
+static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ return tt3650_ci_set_video_port(ca, slot, 1);
+}
+
+static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = ca->data;
+ struct ttusb2_state *state = d->priv;
+ u8 buf[1];
+ int ret;
+
+ ci_dbg("%d", slot);
+
+ if (slot)
+ return -EINVAL;
+
+ buf[0] = 0;
+
+ mutex_lock(&state->ca_mutex);
+
+ ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
+ if (ret)
+ goto failed;
+
+ msleep(500);
+
+ buf[0] = 1;
+
+ ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
+ if (ret)
+ goto failed;
+
+ msleep(500);
+
+ buf[0] = 0; /* FTA */
+
+ ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
+
+ msleep(1100);
+
+ failed:
+ mutex_unlock(&state->ca_mutex);
+
+ return ret;
+}
+
+static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ u8 buf[1];
+ int ret;
+
+ if (slot)
+ return -EINVAL;
+
+ ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1);
+ if (ret)
+ return ret;
+
+ if (1 == buf[0]) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT |
+ DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return 0;
+}
+
+static void tt3650_ci_uninit(struct dvb_usb_device *d)
+{
+ struct ttusb2_state *state;
+
+ ci_dbg("");
+
+ if (NULL == d)
+ return;
+
+ state = d->priv;
+ if (NULL == state)
+ return;
+
+ if (NULL == state->ca.data)
+ return;
+
+ dvb_ca_en50221_release(&state->ca);
+
+ memset(&state->ca, 0, sizeof(state->ca));
+}
+
+static int tt3650_ci_init(struct dvb_usb_adapter *a)
+{
+ struct dvb_usb_device *d = a->dev;
+ struct ttusb2_state *state = d->priv;
+ int ret;
+
+ ci_dbg("");
+
+ mutex_init(&state->ca_mutex);
+
+ state->ca.owner = THIS_MODULE;
+ state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem;
+ state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem;
+ state->ca.read_cam_control = tt3650_ci_read_cam_control;
+ state->ca.write_cam_control = tt3650_ci_write_cam_control;
+ state->ca.slot_reset = tt3650_ci_slot_reset;
+ state->ca.slot_shutdown = tt3650_ci_slot_shutdown;
+ state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable;
+ state->ca.poll_slot_status = tt3650_ci_poll_slot_status;
+ state->ca.data = d;
+
+ ret = dvb_ca_en50221_init(&a->dvb_adap,
+ &state->ca,
+ /* flags */ 0,
+ /* n_slots */ 1);
+ if (ret) {
+ err("Cannot initialize CI: Error %d.", ret);
+ memset(&state->ca, 0, sizeof(state->ca));
+ return ret;
+ }
+
+ info("CI initialized.");
+
+ return 0;
+}
+
static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
static u8 obuf[60], ibuf[60];
- int i,read;
+ int i, write_read, read;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
@@ -91,28 +365,35 @@
warn("more than 2 i2c messages at a time is not handled yet. TODO.");
for (i = 0; i < num; i++) {
- read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+ write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+ read = msg[i].flags & I2C_M_RD;
- obuf[0] = (msg[i].addr << 1) | read;
- obuf[1] = msg[i].len;
+ obuf[0] = (msg[i].addr << 1) | (write_read | read);
+ if (read)
+ obuf[1] = 0;
+ else
+ obuf[1] = msg[i].len;
/* read request */
- if (read)
+ if (write_read)
obuf[2] = msg[i+1].len;
+ else if (read)
+ obuf[2] = msg[i].len;
else
obuf[2] = 0;
- memcpy(&obuf[3],msg[i].buf,msg[i].len);
+ memcpy(&obuf[3], msg[i].buf, msg[i].len);
if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
err("i2c transfer failed.");
break;
}
- if (read) {
- memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
+ if (write_read) {
+ memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len);
i++;
- }
+ } else if (read)
+ memcpy(msg[i].buf, &ibuf[3], msg[i].len);
}
mutex_unlock(&d->i2c_mutex);
@@ -190,12 +471,31 @@
.deltaf = 0xa511,
};
+static struct tda10048_config tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_4000,
+ .dtv7_if_freq_khz = TDA10048_IF_4500,
+ .dtv8_if_freq_khz = TDA10048_IF_5000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .no_firmware = 1,
+ .set_pll = true ,
+ .pll_m = 5,
+ .pll_n = 3,
+ .pll_p = 0,
+};
+
+static struct tda827x_config tda827x_config = {
+ .config = 0,
+};
+
static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev,0,3) < 0)
err("set interface to alts=3 failed");
- if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
+ if ((adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
deb_info("TDA10086 attach failed\n");
return -ENODEV;
}
@@ -203,20 +503,57 @@
return 0;
}
+static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+ return adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, enable);
+}
+
static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
err("set interface to alts=3 failed");
- if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
- deb_info("TDA10023 attach failed\n");
- return -ENODEV;
+
+ if (adap->fe_adap[0].fe == NULL) {
+ /* FE 0 DVB-C */
+ adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
+ &tda10023_config, &adap->dev->i2c_adap, 0x48);
+
+ if (adap->fe_adap[0].fe == NULL) {
+ deb_info("TDA10023 attach failed\n");
+ return -ENODEV;
+ }
+ tt3650_ci_init(adap);
+ } else {
+ adap->fe_adap[1].fe = dvb_attach(tda10048_attach,
+ &tda10048_config, &adap->dev->i2c_adap);
+
+ if (adap->fe_adap[1].fe == NULL) {
+ deb_info("TDA10048 attach failed\n");
+ return -ENODEV;
+ }
+
+ /* tuner is behind TDA10023 I2C-gate */
+ adap->fe_adap[1].fe->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl;
+
}
+
return 0;
}
static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
{
- if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) {
+ struct dvb_frontend *fe;
+
+ /* MFE: select correct FE to attach tuner since that's called twice */
+ if (adap->fe_adap[1].fe == NULL)
+ fe = adap->fe_adap[0].fe;
+ else
+ fe = adap->fe_adap[1].fe;
+
+ /* attach tuner */
+ if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) {
printk(KERN_ERR "%s: No tda827x found!\n", __func__);
return -ENODEV;
}
@@ -225,12 +562,12 @@
static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
{
- if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
+ if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
deb_info("TDA8263 attach failed\n");
return -ENODEV;
}
- if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
+ if (dvb_attach(lnbp21_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
deb_info("LNBP21 attach failed\n");
return -ENODEV;
}
@@ -242,6 +579,14 @@
static struct dvb_usb_device_properties ttusb2_properties_s2400;
static struct dvb_usb_device_properties ttusb2_properties_ct3650;
+static void ttusb2_usb_disconnect(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+
+ tt3650_ci_uninit(d);
+ dvb_usb_device_exit(intf);
+}
+
static int ttusb2_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -277,6 +622,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = NULL, // ttusb2_streaming_ctrl,
.frontend_attach = ttusb2_frontend_tda10086_attach,
@@ -295,6 +642,7 @@
}
}
}
+ }},
}
},
@@ -329,6 +677,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = NULL,
.frontend_attach = ttusb2_frontend_tda10086_attach,
@@ -347,6 +697,7 @@
}
}
}
+ }},
}
},
@@ -383,6 +734,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 2,
+ .fe = {{
.streaming_ctrl = NULL,
.frontend_attach = ttusb2_frontend_tda10023_attach,
@@ -401,6 +754,26 @@
}
}
}
+ }, {
+ .streaming_ctrl = NULL,
+
+ .frontend_attach = ttusb2_frontend_tda10023_attach,
+ .tuner_attach = ttusb2_tuner_tda827x_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1,
+ }
+ }
+ }
+ }},
},
},
@@ -422,7 +795,7 @@
static struct usb_driver ttusb2_driver = {
.name = "dvb_usb_ttusb2",
.probe = ttusb2_probe,
- .disconnect = dvb_usb_device_exit,
+ .disconnect = ttusb2_usb_disconnect,
.id_table = ttusb2_table,
};
diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c
index 118aab1..463673a 100644
--- a/drivers/media/dvb/dvb-usb/umt-010.c
+++ b/drivers/media/dvb/dvb-usb/umt-010.c
@@ -60,14 +60,14 @@
umt_config.demod_init = umt_mt352_demod_init;
umt_config.demod_address = 0xf;
- adap->fe = dvb_attach(mt352_attach, &umt_config, &adap->dev->i2c_adap);
+ adap->fe_adap[0].fe = dvb_attach(mt352_attach, &umt_config, &adap->dev->i2c_adap);
return 0;
}
static int umt_tuner_attach (struct dvb_usb_adapter *adap)
{
- dvb_attach(dvb_pll_attach, adap->fe, 0x61, NULL, DVB_PLL_TUA6034);
+ dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_TUA6034);
return 0;
}
@@ -100,6 +100,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.streaming_ctrl = dibusb2_0_streaming_ctrl,
.frontend_attach = umt_mt352_frontend_attach,
.tuner_attach = umt_tuner_attach,
@@ -115,7 +117,7 @@
}
}
},
-
+ }},
.size_of_priv = sizeof(struct dibusb_state),
}
},
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
index 86d6893..d62ee0f 100644
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/usb-urb.c
@@ -148,7 +148,7 @@
if (!stream->urb_list[i]) {
deb_mem("not enough memory for urb_alloc_urb!.\n");
for (j = 0; j < i; j++)
- usb_free_urb(stream->urb_list[i]);
+ usb_free_urb(stream->urb_list[j]);
return -ENOMEM;
}
usb_fill_bulk_urb( stream->urb_list[i], stream->udev,
@@ -181,7 +181,7 @@
if (!stream->urb_list[i]) {
deb_mem("not enough memory for urb_alloc_urb!\n");
for (j = 0; j < i; j++)
- usb_free_urb(stream->urb_list[i]);
+ usb_free_urb(stream->urb_list[j]);
return -ENOMEM;
}
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index 54355f8..45e31f2 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -320,7 +320,7 @@
vp702x_init_pid_filter(adap);
- adap->fe = vp702x_fe_attach(adap->dev);
+ adap->fe_adap[0].fe = vp702x_fe_attach(adap->dev);
vp702x_usb_out_op(adap->dev, SET_TUNER_POWER_REQ, 1, 7, NULL, 0);
return 0;
@@ -383,6 +383,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.caps = DVB_USB_ADAP_RECEIVES_204_BYTE_TS,
.streaming_ctrl = vp702x_streaming_ctrl,
@@ -399,6 +401,7 @@
}
}
},
+ }},
.size_of_priv = sizeof(struct vp702x_adapter_state),
}
},
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 536c16c..90873af 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -214,7 +214,7 @@
/* Dump the EEPROM */
/* vp7045_read_eeprom(d,buf, 255, FX2_ID_ADDR); */
- adap->fe = vp7045_fe_attach(adap->dev);
+ adap->fe_adap[0].fe = vp7045_fe_attach(adap->dev);
return 0;
}
@@ -245,6 +245,8 @@
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 1,
+ .fe = {{
.frontend_attach = vp7045_frontend_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
@@ -257,6 +259,7 @@
}
}
},
+ }},
}
},
.power_ctrl = vp7045_power_ctrl,
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 32e08e3..4a2d2e6 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -236,6 +236,13 @@
A DVB-S/DSS Direct Conversion reveiver.
Say Y when you want to support this frontend.
+config DVB_TDA10071
+ tristate "NXP TDA10071"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ Say Y when you want to support this frontend.
+
comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
@@ -600,6 +607,16 @@
help
An SEC control chips.
+config DVB_LNBP22
+ tristate "LNBP22 SEC controllers"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ LNB power supply and control voltage
+ regulator chip with step-up converter
+ and I2C interface.
+ Say Y when you want to support this chip.
+
config DVB_ISL6405
tristate "ISL6405 SEC controller"
depends on DVB_CORE && I2C
@@ -621,6 +638,11 @@
help
A SEC controller chip from Intersil
+config DVB_A8293
+ tristate "Allegro A8293"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+
config DVB_LGS8GL5
tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)"
depends on DVB_CORE && I2C
@@ -661,6 +683,14 @@
help
A DVB-S tuner module. Say Y when you want to support this frontend.
+config DVB_IT913X_FE
+ tristate "it913x frontend and it9137 tuner"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-T tuner module.
+ Say Y when you want to support this frontend.
+
comment "Tools to develop new frontends"
config DVB_DUMMY_FE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 6a6ba05..f639f67 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -2,8 +2,8 @@
# Makefile for the kernel DVB frontend device drivers.
#
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
-EXTRA_CFLAGS += -Idrivers/media/common/tuners/
+ccflags-y += -Idrivers/media/dvb/dvb-core/
+ccflags-y += -Idrivers/media/common/tuners/
stb0899-objs = stb0899_drv.o stb0899_algo.o
stv0900-objs = stv0900_core.o stv0900_sw.o
@@ -52,6 +52,7 @@
obj-$(CONFIG_DVB_LGDT3305) += lgdt3305.o
obj-$(CONFIG_DVB_CX24123) += cx24123.o
obj-$(CONFIG_DVB_LNBP21) += lnbp21.o
+obj-$(CONFIG_DVB_LNBP22) += lnbp22.o
obj-$(CONFIG_DVB_ISL6405) += isl6405.o
obj-$(CONFIG_DVB_ISL6421) += isl6421.o
obj-$(CONFIG_DVB_TDA10086) += tda10086.o
@@ -91,4 +92,7 @@
obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o
obj-$(CONFIG_DVB_DRXK) += drxk.o
obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o
+obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o
+obj-$(CONFIG_DVB_A8293) += a8293.o
+obj-$(CONFIG_DVB_TDA10071) += tda10071.o
diff --git a/drivers/media/dvb/frontends/a8293.c b/drivers/media/dvb/frontends/a8293.c
new file mode 100644
index 0000000..bb56497
--- /dev/null
+++ b/drivers/media/dvb/frontends/a8293.c
@@ -0,0 +1,184 @@
+/*
+ * Allegro A8293 SEC driver
+ *
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "dvb_frontend.h"
+#include "a8293.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define LOG_PREFIX "a8293"
+
+#undef dbg
+#define dbg(f, arg...) \
+ if (debug) \
+ printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef err
+#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
+#undef info
+#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef warn
+#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
+
+
+struct a8293_priv {
+ struct i2c_adapter *i2c;
+ const struct a8293_config *cfg;
+ u8 reg[2];
+};
+
+static int a8293_i2c(struct a8293_priv *priv, u8 *val, int len, bool rd)
+{
+ int ret;
+ struct i2c_msg msg[1] = {
+ {
+ .addr = priv->cfg->i2c_addr,
+ .len = len,
+ .buf = val,
+ }
+ };
+
+ if (rd)
+ msg[0].flags = I2C_M_RD;
+ else
+ msg[0].flags = 0;
+
+ ret = i2c_transfer(priv->i2c, msg, 1);
+ if (ret == 1) {
+ ret = 0;
+ } else {
+ warn("i2c failed=%d rd=%d", ret, rd);
+ ret = -EREMOTEIO;
+ }
+
+ return ret;
+}
+
+static int a8293_wr(struct a8293_priv *priv, u8 *val, int len)
+{
+ return a8293_i2c(priv, val, len, 0);
+}
+
+static int a8293_rd(struct a8293_priv *priv, u8 *val, int len)
+{
+ return a8293_i2c(priv, val, len, 1);
+}
+
+static int a8293_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t fe_sec_voltage)
+{
+ struct a8293_priv *priv = fe->sec_priv;
+ int ret;
+
+ dbg("%s: fe_sec_voltage=%d", __func__, fe_sec_voltage);
+
+ switch (fe_sec_voltage) {
+ case SEC_VOLTAGE_OFF:
+ /* ENB=0 */
+ priv->reg[0] = 0x10;
+ break;
+ case SEC_VOLTAGE_13:
+ /* VSEL0=1, VSEL1=0, VSEL2=0, VSEL3=0, ENB=1*/
+ priv->reg[0] = 0x31;
+ break;
+ case SEC_VOLTAGE_18:
+ /* VSEL0=0, VSEL1=0, VSEL2=0, VSEL3=1, ENB=1*/
+ priv->reg[0] = 0x38;
+ break;
+ default:
+ ret = -EINVAL;
+ goto err;
+ };
+
+ ret = a8293_wr(priv, &priv->reg[0], 1);
+ if (ret)
+ goto err;
+
+ return ret;
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static void a8293_release_sec(struct dvb_frontend *fe)
+{
+ dbg("%s:", __func__);
+
+ a8293_set_voltage(fe, SEC_VOLTAGE_OFF);
+
+ kfree(fe->sec_priv);
+ fe->sec_priv = NULL;
+}
+
+struct dvb_frontend *a8293_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, const struct a8293_config *cfg)
+{
+ int ret;
+ struct a8293_priv *priv = NULL;
+ u8 buf[2];
+
+ /* allocate memory for the internal priv */
+ priv = kzalloc(sizeof(struct a8293_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /* setup the priv */
+ priv->i2c = i2c;
+ priv->cfg = cfg;
+ fe->sec_priv = priv;
+
+ /* check if the SEC is there */
+ ret = a8293_rd(priv, buf, 2);
+ if (ret)
+ goto err;
+
+ /* ENB=0 */
+ priv->reg[0] = 0x10;
+ ret = a8293_wr(priv, &priv->reg[1], 1);
+ if (ret)
+ goto err;
+
+ /* TMODE=0, TGATE=1 */
+ priv->reg[1] = 0x82;
+ ret = a8293_wr(priv, &priv->reg[1], 1);
+ if (ret)
+ goto err;
+
+ info("Allegro A8293 SEC attached.");
+
+ fe->ops.release_sec = a8293_release_sec;
+
+ /* override frontend ops */
+ fe->ops.set_voltage = a8293_set_voltage;
+
+ return fe;
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ kfree(priv);
+ return NULL;
+}
+EXPORT_SYMBOL(a8293_attach);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Allegro A8293 SEC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/a8293.h b/drivers/media/dvb/frontends/a8293.h
new file mode 100644
index 0000000..ed29e55
--- /dev/null
+++ b/drivers/media/dvb/frontends/a8293.h
@@ -0,0 +1,41 @@
+/*
+ * Allegro A8293 SEC driver
+ *
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef A8293_H
+#define A8293_H
+
+struct a8293_config {
+ u8 i2c_addr;
+};
+
+#if defined(CONFIG_DVB_A8293) || \
+ (defined(CONFIG_DVB_A8293_MODULE) && defined(MODULE))
+extern struct dvb_frontend *a8293_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, const struct a8293_config *cfg);
+#else
+static inline struct dvb_frontend *a8293_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, const struct a8293_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif /* A8293_H */
diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h
index 2906582..03cab7b 100644
--- a/drivers/media/dvb/frontends/cxd2820r.h
+++ b/drivers/media/dvb/frontends/cxd2820r.h
@@ -93,9 +93,6 @@
struct i2c_adapter *i2c,
struct dvb_frontend *fe
);
-extern struct i2c_adapter *cxd2820r_get_tuner_i2c_adapter(
- struct dvb_frontend *fe
-);
#else
static inline struct dvb_frontend *cxd2820r_attach(
const struct cxd2820r_config *config,
@@ -106,12 +103,6 @@
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
-static inline struct i2c_adapter *cxd2820r_get_tuner_i2c_adapter(
- struct dvb_frontend *fe
-)
-{
- return NULL;
-}
#endif
diff --git a/drivers/media/dvb/frontends/cxd2820r_c.c b/drivers/media/dvb/frontends/cxd2820r_c.c
index 3c07d40..b85f501 100644
--- a/drivers/media/dvb/frontends/cxd2820r_c.c
+++ b/drivers/media/dvb/frontends/cxd2820r_c.c
@@ -335,4 +335,3 @@
return 0;
}
-
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c
index d416e85..036480f 100644
--- a/drivers/media/dvb/frontends/cxd2820r_core.c
+++ b/drivers/media/dvb/frontends/cxd2820r_core.c
@@ -727,72 +727,22 @@
struct cxd2820r_priv *priv = fe->demodulator_priv;
dbg("%s", __func__);
- if (fe->ops.info.type == FE_OFDM) {
- i2c_del_adapter(&priv->tuner_i2c_adapter);
+ if (fe->ops.info.type == FE_OFDM)
kfree(priv);
- }
return;
}
-static u32 cxd2820r_tuner_i2c_func(struct i2c_adapter *adapter)
-{
- return I2C_FUNC_I2C;
-}
-
-static int cxd2820r_tuner_i2c_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg msg[], int num)
-{
- struct cxd2820r_priv *priv = i2c_get_adapdata(i2c_adap);
- int ret;
- u8 *obuf = kmalloc(msg[0].len + 2, GFP_KERNEL);
- struct i2c_msg msg2[2] = {
- {
- .addr = priv->cfg.i2c_address,
- .flags = 0,
- .len = msg[0].len + 2,
- .buf = obuf,
- }, {
- .addr = priv->cfg.i2c_address,
- .flags = I2C_M_RD,
- .len = msg[1].len,
- .buf = msg[1].buf,
- }
- };
-
- if (!obuf)
- return -ENOMEM;
-
- obuf[0] = 0x09;
- obuf[1] = (msg[0].addr << 1);
- if (num == 2) { /* I2C read */
- obuf[1] = (msg[0].addr << 1) | I2C_M_RD; /* I2C RD flag */
- msg2[0].len = msg[0].len + 2 - 1; /* '-1' maybe HW bug ? */
- }
- memcpy(&obuf[2], msg[0].buf, msg[0].len);
-
- ret = i2c_transfer(priv->i2c, msg2, num);
- if (ret < 0)
- warn("tuner i2c failed ret:%d", ret);
-
- kfree(obuf);
-
- return ret;
-}
-
-static struct i2c_algorithm cxd2820r_tuner_i2c_algo = {
- .master_xfer = cxd2820r_tuner_i2c_xfer,
- .functionality = cxd2820r_tuner_i2c_func,
-};
-
-struct i2c_adapter *cxd2820r_get_tuner_i2c_adapter(struct dvb_frontend *fe)
+static int cxd2820r_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
- return &priv->tuner_i2c_adapter;
-}
-EXPORT_SYMBOL(cxd2820r_get_tuner_i2c_adapter);
+ dbg("%s: %d", __func__, enable);
-static struct dvb_frontend_ops cxd2820r_ops[2];
+ /* Bit 0 of reg 0xdb in bank 0x00 controls I2C repeater */
+ return cxd2820r_wr_reg_mask(priv, 0xdb, enable ? 1 : 0, 0x1);
+}
+
+static const struct dvb_frontend_ops cxd2820r_ops[2];
struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg,
struct i2c_adapter *i2c, struct dvb_frontend *fe)
@@ -831,18 +781,6 @@
priv->fe[0].demodulator_priv = priv;
priv->fe[1].demodulator_priv = priv;
- /* create tuner i2c adapter */
- strlcpy(priv->tuner_i2c_adapter.name,
- "CXD2820R tuner I2C adapter",
- sizeof(priv->tuner_i2c_adapter.name));
- priv->tuner_i2c_adapter.algo = &cxd2820r_tuner_i2c_algo;
- priv->tuner_i2c_adapter.algo_data = NULL;
- i2c_set_adapdata(&priv->tuner_i2c_adapter, priv);
- if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) {
- err("tuner I2C bus could not be initialized");
- goto error;
- }
-
return &priv->fe[0];
} else {
@@ -858,7 +796,7 @@
}
EXPORT_SYMBOL(cxd2820r_attach);
-static struct dvb_frontend_ops cxd2820r_ops[2] = {
+static const struct dvb_frontend_ops cxd2820r_ops[2] = {
{
/* DVB-T/T2 */
.info = {
@@ -883,6 +821,7 @@
.sleep = cxd2820r_sleep,
.get_tune_settings = cxd2820r_get_tune_settings,
+ .i2c_gate_ctrl = cxd2820r_i2c_gate_ctrl,
.get_frontend = cxd2820r_get_frontend,
@@ -911,6 +850,7 @@
.sleep = cxd2820r_sleep,
.get_tune_settings = cxd2820r_get_tune_settings,
+ .i2c_gate_ctrl = cxd2820r_i2c_gate_ctrl,
.set_frontend = cxd2820r_set_frontend,
.get_frontend = cxd2820r_get_frontend,
diff --git a/drivers/media/dvb/frontends/cxd2820r_priv.h b/drivers/media/dvb/frontends/cxd2820r_priv.h
index 0c0ebc9..9553913 100644
--- a/drivers/media/dvb/frontends/cxd2820r_priv.h
+++ b/drivers/media/dvb/frontends/cxd2820r_priv.h
@@ -50,7 +50,6 @@
struct i2c_adapter *i2c;
struct dvb_frontend fe[2];
struct cxd2820r_config cfg;
- struct i2c_adapter tuner_i2c_adapter;
struct mutex fe_lock; /* FE lock */
int active_fe:2; /* FE lock, -1=NONE, 0=DVB-T/T2, 1=DVB-C */
diff --git a/drivers/media/dvb/frontends/cxd2820r_t.c b/drivers/media/dvb/frontends/cxd2820r_t.c
index 6582564..a04f9c8 100644
--- a/drivers/media/dvb/frontends/cxd2820r_t.c
+++ b/drivers/media/dvb/frontends/cxd2820r_t.c
@@ -446,4 +446,3 @@
return 0;
}
-
diff --git a/drivers/media/dvb/frontends/cxd2820r_t2.c b/drivers/media/dvb/frontends/cxd2820r_t2.c
index c47b35c..6548588 100644
--- a/drivers/media/dvb/frontends/cxd2820r_t2.c
+++ b/drivers/media/dvb/frontends/cxd2820r_t2.c
@@ -420,4 +420,3 @@
return 0;
}
-
diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c
index 1d47d4d..dc1cb17 100644
--- a/drivers/media/dvb/frontends/dib0070.c
+++ b/drivers/media/dvb/frontends/dib0070.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
#include "dvb_frontend.h"
@@ -78,10 +79,18 @@
struct i2c_msg msg[2];
u8 i2c_write_buffer[3];
u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
};
-static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
+static u16 dib0070_read_reg(struct dib0070_state *state, u8 reg)
{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
state->i2c_write_buffer[0] = reg;
memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
@@ -96,13 +105,23 @@
if (i2c_transfer(state->i2c, state->msg, 2) != 2) {
printk(KERN_WARNING "DiB0070 I2C read failed\n");
- return 0;
- }
- return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ ret = 0;
+ } else
+ ret = (state->i2c_read_buffer[0] << 8)
+ | state->i2c_read_buffer[1];
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
state->i2c_write_buffer[0] = reg;
state->i2c_write_buffer[1] = val >> 8;
state->i2c_write_buffer[2] = val & 0xff;
@@ -115,9 +134,12 @@
if (i2c_transfer(state->i2c, state->msg, 1) != 1) {
printk(KERN_WARNING "DiB0070 I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
+ ret = -EREMOTEIO;
+ } else
+ ret = 0;
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
#define HARD_RESET(state) do { \
@@ -734,6 +756,7 @@
state->cfg = cfg;
state->i2c = i2c;
state->fe = fe;
+ mutex_init(&state->i2c_buffer_lock);
fe->tuner_priv = state;
if (dib0070_reset(fe) != 0)
diff --git a/drivers/media/dvb/frontends/dib0090.c b/drivers/media/dvb/frontends/dib0090.c
index c9c935a..b174d1c 100644
--- a/drivers/media/dvb/frontends/dib0090.c
+++ b/drivers/media/dvb/frontends/dib0090.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
#include "dvb_frontend.h"
@@ -196,6 +197,7 @@
struct i2c_msg msg[2];
u8 i2c_write_buffer[3];
u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
};
struct dib0090_fw_state {
@@ -208,10 +210,18 @@
struct i2c_msg msg;
u8 i2c_write_buffer[2];
u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
};
static u16 dib0090_read_reg(struct dib0090_state *state, u8 reg)
{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
state->i2c_write_buffer[0] = reg;
memset(state->msg, 0, 2 * sizeof(struct i2c_msg));
@@ -226,14 +236,24 @@
if (i2c_transfer(state->i2c, state->msg, 2) != 2) {
printk(KERN_WARNING "DiB0090 I2C read failed\n");
- return 0;
- }
+ ret = 0;
+ } else
+ ret = (state->i2c_read_buffer[0] << 8)
+ | state->i2c_read_buffer[1];
- return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
static int dib0090_write_reg(struct dib0090_state *state, u32 reg, u16 val)
{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
state->i2c_write_buffer[0] = reg & 0xff;
state->i2c_write_buffer[1] = val >> 8;
state->i2c_write_buffer[2] = val & 0xff;
@@ -246,13 +266,23 @@
if (i2c_transfer(state->i2c, state->msg, 1) != 1) {
printk(KERN_WARNING "DiB0090 I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
+ ret = -EREMOTEIO;
+ } else
+ ret = 0;
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
static u16 dib0090_fw_read_reg(struct dib0090_fw_state *state, u8 reg)
{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
state->i2c_write_buffer[0] = reg;
memset(&state->msg, 0, sizeof(struct i2c_msg));
@@ -262,13 +292,24 @@
state->msg.len = 2;
if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
printk(KERN_WARNING "DiB0090 I2C read failed\n");
- return 0;
- }
- return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ ret = 0;
+ } else
+ ret = (state->i2c_read_buffer[0] << 8)
+ | state->i2c_read_buffer[1];
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
static int dib0090_fw_write_reg(struct dib0090_fw_state *state, u8 reg, u16 val)
{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
state->i2c_write_buffer[0] = val >> 8;
state->i2c_write_buffer[1] = val & 0xff;
@@ -279,9 +320,12 @@
state->msg.len = 2;
if (i2c_transfer(state->i2c, &state->msg, 1) != 1) {
printk(KERN_WARNING "DiB0090 I2C write failed\n");
- return -EREMOTEIO;
- }
- return 0;
+ ret = -EREMOTEIO;
+ } else
+ ret = 0;
+
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
#define HARD_RESET(state) do { if (cfg->reset) { if (cfg->sleep) cfg->sleep(fe, 0); msleep(10); cfg->reset(fe, 1); msleep(10); cfg->reset(fe, 0); msleep(10); } } while (0)
@@ -2440,6 +2484,7 @@
st->config = config;
st->i2c = i2c;
st->fe = fe;
+ mutex_init(&st->i2c_buffer_lock);
fe->tuner_priv = st;
if (config->wbd == NULL)
@@ -2471,6 +2516,7 @@
st->config = config;
st->i2c = i2c;
st->fe = fe;
+ mutex_init(&st->i2c_buffer_lock);
fe->tuner_priv = st;
if (dib0090_fw_reset_digital(fe, st->config) != 0)
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index 79cb1c2..dbb76d7 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
#include "dvb_frontend.h"
@@ -55,6 +56,7 @@
struct i2c_msg msg[2];
u8 i2c_write_buffer[4];
u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
};
enum dib7000m_power_mode {
@@ -69,6 +71,13 @@
static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
state->i2c_write_buffer[0] = (reg >> 8) | 0x80;
state->i2c_write_buffer[1] = reg & 0xff;
@@ -85,11 +94,21 @@
if (i2c_transfer(state->i2c_adap, state->msg, 2) != 2)
dprintk("i2c read error on %d",reg);
- return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ mutex_unlock(&state->i2c_buffer_lock);
+
+ return ret;
}
static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
state->i2c_write_buffer[0] = (reg >> 8) & 0xff;
state->i2c_write_buffer[1] = reg & 0xff;
state->i2c_write_buffer[2] = (val >> 8) & 0xff;
@@ -101,7 +120,10 @@
state->msg[0].buf = state->i2c_write_buffer;
state->msg[0].len = 4;
- return i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ? -EREMOTEIO : 0;
+ ret = (i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ?
+ -EREMOTEIO : 0);
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
static void dib7000m_write_tab(struct dib7000m_state *state, u16 *buf)
{
@@ -1385,6 +1407,7 @@
demod = &st->demod;
demod->demodulator_priv = st;
memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
+ mutex_init(&st->i2c_buffer_lock);
st->timf_default = cfg->bw->timf;
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index a64a538..ce8534f 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
#include "dvb_math.h"
#include "dvb_frontend.h"
@@ -68,6 +69,7 @@
struct i2c_msg msg[2];
u8 i2c_write_buffer[4];
u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
};
enum dib7000p_power_mode {
@@ -81,6 +83,13 @@
static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg)
{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
state->i2c_write_buffer[0] = reg >> 8;
state->i2c_write_buffer[1] = reg & 0xff;
@@ -97,11 +106,20 @@
if (i2c_transfer(state->i2c_adap, state->msg, 2) != 2)
dprintk("i2c read error on %d", reg);
- return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val)
{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
state->i2c_write_buffer[0] = (reg >> 8) & 0xff;
state->i2c_write_buffer[1] = reg & 0xff;
state->i2c_write_buffer[2] = (val >> 8) & 0xff;
@@ -113,7 +131,10 @@
state->msg[0].buf = state->i2c_write_buffer;
state->msg[0].len = 4;
- return i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ? -EREMOTEIO : 0;
+ ret = (i2c_transfer(state->i2c_adap, state->msg, 1) != 1 ?
+ -EREMOTEIO : 0);
+ mutex_unlock(&state->i2c_buffer_lock);
+ return ret;
}
static void dib7000p_write_tab(struct dib7000p_state *state, u16 * buf)
@@ -1577,8 +1598,8 @@
return -ENOMEM;
rx = kzalloc(2*sizeof(u8), GFP_KERNEL);
if (!rx) {
- goto rx_memory_error;
ret = -ENOMEM;
+ goto rx_memory_error;
}
msg[0].buf = tx;
@@ -1646,6 +1667,7 @@
return -ENOMEM;
dpst->i2c_adap = i2c;
+ mutex_init(&dpst->i2c_buffer_lock);
for (k = no_of_demods - 1; k >= 0; k--) {
dpst->cfg = cfg[k];
@@ -2324,6 +2346,7 @@
demod = &st->demod;
demod->demodulator_priv = st;
memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops));
+ mutex_init(&st->i2c_buffer_lock);
dib7000p_write_word(st, 1287, 0x0003); /* sram lead in, rdy */
@@ -2333,8 +2356,9 @@
st->version = dib7000p_read_word(st, 897);
/* FIXME: make sure the dev.parent field is initialized, or else
- request_firmware() will hit an OOPS (this should be moved somewhere
- more common) */
+ request_firmware() will hit an OOPS (this should be moved somewhere
+ more common) */
+ st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent;
/* FIXME: make sure the dev.parent field is initialized, or else
request_firmware() will hit an OOPS (this should be moved somewhere
diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c
index 7d2ea11..fe284d5 100644
--- a/drivers/media/dvb/frontends/dib8000.c
+++ b/drivers/media/dvb/frontends/dib8000.c
@@ -10,6 +10,8 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
+
#include "dvb_math.h"
#include "dvb_frontend.h"
@@ -37,6 +39,7 @@
u8 addr;
u8 *i2c_write_buffer;
u8 *i2c_read_buffer;
+ struct mutex *i2c_buffer_lock;
};
struct dib8000_state {
@@ -77,6 +80,7 @@
struct i2c_msg msg[2];
u8 i2c_write_buffer[4];
u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
};
enum dib8000_power_mode {
@@ -86,24 +90,39 @@
static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
{
+ u16 ret;
struct i2c_msg msg[2] = {
- {.addr = i2c->addr >> 1, .flags = 0,
- .buf = i2c->i2c_write_buffer, .len = 2},
- {.addr = i2c->addr >> 1, .flags = I2C_M_RD,
- .buf = i2c->i2c_read_buffer, .len = 2},
+ {.addr = i2c->addr >> 1, .flags = 0, .len = 2},
+ {.addr = i2c->addr >> 1, .flags = I2C_M_RD, .len = 2},
};
+ if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
+ msg[0].buf = i2c->i2c_write_buffer;
msg[0].buf[0] = reg >> 8;
msg[0].buf[1] = reg & 0xff;
+ msg[1].buf = i2c->i2c_read_buffer;
if (i2c_transfer(i2c->adap, msg, 2) != 2)
dprintk("i2c read error on %d", reg);
- return (msg[1].buf[0] << 8) | msg[1].buf[1];
+ ret = (msg[1].buf[0] << 8) | msg[1].buf[1];
+ mutex_unlock(i2c->i2c_buffer_lock);
+ return ret;
}
static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
state->i2c_write_buffer[0] = reg >> 8;
state->i2c_write_buffer[1] = reg & 0xff;
@@ -120,7 +139,10 @@
if (i2c_transfer(state->i2c.adap, state->msg, 2) != 2)
dprintk("i2c read error on %d", reg);
- return (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+ mutex_unlock(&state->i2c_buffer_lock);
+
+ return ret;
}
static u32 dib8000_read32(struct dib8000_state *state, u16 reg)
@@ -135,22 +157,35 @@
static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val)
{
- struct i2c_msg msg = {.addr = i2c->addr >> 1, .flags = 0,
- .buf = i2c->i2c_write_buffer, .len = 4};
+ struct i2c_msg msg = {.addr = i2c->addr >> 1, .flags = 0, .len = 4};
int ret = 0;
+ if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
+ msg.buf = i2c->i2c_write_buffer;
msg.buf[0] = (reg >> 8) & 0xff;
msg.buf[1] = reg & 0xff;
msg.buf[2] = (val >> 8) & 0xff;
msg.buf[3] = val & 0xff;
ret = i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+ mutex_unlock(i2c->i2c_buffer_lock);
return ret;
}
static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val)
{
+ int ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
state->i2c_write_buffer[0] = (reg >> 8) & 0xff;
state->i2c_write_buffer[1] = reg & 0xff;
state->i2c_write_buffer[2] = (val >> 8) & 0xff;
@@ -162,7 +197,11 @@
state->msg[0].buf = state->i2c_write_buffer;
state->msg[0].len = 4;
- return i2c_transfer(state->i2c.adap, state->msg, 1) != 1 ? -EREMOTEIO : 0;
+ ret = (i2c_transfer(state->i2c.adap, state->msg, 1) != 1 ?
+ -EREMOTEIO : 0);
+ mutex_unlock(&state->i2c_buffer_lock);
+
+ return ret;
}
static const s16 coeff_2k_sb_1seg_dqpsk[8] = {
@@ -2434,8 +2473,15 @@
if (!client.i2c_read_buffer) {
dprintk("%s: not enough memory", __func__);
ret = -ENOMEM;
- goto error_memory;
+ goto error_memory_read;
}
+ client.i2c_buffer_lock = kzalloc(sizeof(struct mutex), GFP_KERNEL);
+ if (!client.i2c_buffer_lock) {
+ dprintk("%s: not enough memory", __func__);
+ ret = -ENOMEM;
+ goto error_memory_lock;
+ }
+ mutex_init(client.i2c_buffer_lock);
for (k = no_of_demods - 1; k >= 0; k--) {
/* designated i2c address */
@@ -2476,8 +2522,10 @@
}
error:
+ kfree(client.i2c_buffer_lock);
+error_memory_lock:
kfree(client.i2c_read_buffer);
-error_memory:
+error_memory_read:
kfree(client.i2c_write_buffer);
return ret;
@@ -2581,6 +2629,8 @@
state->i2c.addr = i2c_addr;
state->i2c.i2c_write_buffer = state->i2c_write_buffer;
state->i2c.i2c_read_buffer = state->i2c_read_buffer;
+ mutex_init(&state->i2c_buffer_lock);
+ state->i2c.i2c_buffer_lock = &state->i2c_buffer_lock;
state->gpio_val = cfg->gpio_val;
state->gpio_dir = cfg->gpio_dir;
diff --git a/drivers/media/dvb/frontends/dib9000.c b/drivers/media/dvb/frontends/dib9000.c
index a085588..660f806 100644
--- a/drivers/media/dvb/frontends/dib9000.c
+++ b/drivers/media/dvb/frontends/dib9000.c
@@ -38,6 +38,15 @@
#define DibInitLock(lock) mutex_init(lock)
#define DibFreeLock(lock)
+struct dib9000_pid_ctrl {
+#define DIB9000_PID_FILTER_CTRL 0
+#define DIB9000_PID_FILTER 1
+ u8 cmd;
+ u8 id;
+ u16 pid;
+ u8 onoff;
+};
+
struct dib9000_state {
struct i2c_device i2c;
@@ -99,6 +108,10 @@
struct i2c_msg msg[2];
u8 i2c_write_buffer[255];
u8 i2c_read_buffer[255];
+ DIB_LOCK demod_lock;
+ u8 get_frontend_internal;
+ struct dib9000_pid_ctrl pid_ctrl[10];
+ s8 pid_ctrl_index; /* -1: empty list; -2: do not use the list */
};
static const u32 fe_info[44] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
@@ -1167,8 +1180,8 @@
DibAcquireLock(&state->platform.risc.mem_mbx_lock);
if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
- goto error;
ret = -EIO;
+ goto error;
}
dib9000_risc_mem_read(state, FE_MM_R_CHANNEL_UNION,
@@ -1743,19 +1756,56 @@
int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
{
struct dib9000_state *state = fe->demodulator_priv;
- u16 val = dib9000_read_word(state, 294 + 1) & 0xffef;
+ u16 val;
+ int ret;
+
+ if ((state->pid_ctrl_index != -2) && (state->pid_ctrl_index < 9)) {
+ /* postpone the pid filtering cmd */
+ dprintk("pid filter cmd postpone");
+ state->pid_ctrl_index++;
+ state->pid_ctrl[state->pid_ctrl_index].cmd = DIB9000_PID_FILTER_CTRL;
+ state->pid_ctrl[state->pid_ctrl_index].onoff = onoff;
+ return 0;
+ }
+
+ DibAcquireLock(&state->demod_lock);
+
+ val = dib9000_read_word(state, 294 + 1) & 0xffef;
val |= (onoff & 0x1) << 4;
dprintk("PID filter enabled %d", onoff);
- return dib9000_write_word(state, 294 + 1, val);
+ ret = dib9000_write_word(state, 294 + 1, val);
+ DibReleaseLock(&state->demod_lock);
+ return ret;
+
}
EXPORT_SYMBOL(dib9000_fw_pid_filter_ctrl);
int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
{
struct dib9000_state *state = fe->demodulator_priv;
+ int ret;
+
+ if (state->pid_ctrl_index != -2) {
+ /* postpone the pid filtering cmd */
+ dprintk("pid filter postpone");
+ if (state->pid_ctrl_index < 9) {
+ state->pid_ctrl_index++;
+ state->pid_ctrl[state->pid_ctrl_index].cmd = DIB9000_PID_FILTER;
+ state->pid_ctrl[state->pid_ctrl_index].id = id;
+ state->pid_ctrl[state->pid_ctrl_index].pid = pid;
+ state->pid_ctrl[state->pid_ctrl_index].onoff = onoff;
+ } else
+ dprintk("can not add any more pid ctrl cmd");
+ return 0;
+ }
+
+ DibAcquireLock(&state->demod_lock);
dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff);
- return dib9000_write_word(state, 300 + 1 + id, onoff ? (1 << 13) | pid : 0);
+ ret = dib9000_write_word(state, 300 + 1 + id,
+ onoff ? (1 << 13) | pid : 0);
+ DibReleaseLock(&state->demod_lock);
+ return ret;
}
EXPORT_SYMBOL(dib9000_fw_pid_filter);
@@ -1778,6 +1828,7 @@
DibFreeLock(&state->platform.risc.mbx_lock);
DibFreeLock(&state->platform.risc.mem_lock);
DibFreeLock(&state->platform.risc.mem_mbx_lock);
+ DibFreeLock(&state->demod_lock);
dibx000_exit_i2c_master(&st->i2c_master);
i2c_del_adapter(&st->tuner_adap);
@@ -1795,14 +1846,19 @@
{
struct dib9000_state *state = fe->demodulator_priv;
u8 index_frontend;
- int ret;
+ int ret = 0;
+ DibAcquireLock(&state->demod_lock);
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]);
if (ret < 0)
- return ret;
+ goto error;
}
- return dib9000_mbx_send(state, OUT_MSG_FE_SLEEP, NULL, 0);
+ ret = dib9000_mbx_send(state, OUT_MSG_FE_SLEEP, NULL, 0);
+
+error:
+ DibReleaseLock(&state->demod_lock);
+ return ret;
}
static int dib9000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
@@ -1816,7 +1872,10 @@
struct dib9000_state *state = fe->demodulator_priv;
u8 index_frontend, sub_index_frontend;
fe_status_t stat;
- int ret;
+ int ret = 0;
+
+ if (state->get_frontend_internal == 0)
+ DibAcquireLock(&state->demod_lock);
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat);
@@ -1846,14 +1905,15 @@
state->fe[index_frontend]->dtv_property_cache.rolloff;
}
}
- return 0;
+ ret = 0;
+ goto return_value;
}
}
/* get the channel from master chip */
ret = dib9000_fw_get_channel(fe, fep);
if (ret != 0)
- return ret;
+ goto return_value;
/* synchronize the cache with the other frontends */
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
@@ -1866,8 +1926,12 @@
state->fe[index_frontend]->dtv_property_cache.code_rate_LP = fe->dtv_property_cache.code_rate_LP;
state->fe[index_frontend]->dtv_property_cache.rolloff = fe->dtv_property_cache.rolloff;
}
+ ret = 0;
- return 0;
+return_value:
+ if (state->get_frontend_internal == 0)
+ DibReleaseLock(&state->demod_lock);
+ return ret;
}
static int dib9000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state)
@@ -1912,6 +1976,10 @@
dprintk("dib9000: must specify bandwidth ");
return 0;
}
+
+ state->pid_ctrl_index = -1; /* postpone the pid filtering cmd */
+ DibAcquireLock(&state->demod_lock);
+
fe->dtv_property_cache.delivery_system = SYS_DVBT;
/* set the master status */
@@ -1974,13 +2042,18 @@
/* check the tune result */
if (exit_condition == 1) { /* tune failed */
dprintk("tune failed");
+ DibReleaseLock(&state->demod_lock);
+ /* tune failed; put all the pid filtering cmd to junk */
+ state->pid_ctrl_index = -1;
return 0;
}
dprintk("tune success on frontend%i", index_frontend_success);
/* synchronize all the channel cache */
+ state->get_frontend_internal = 1;
dib9000_get_frontend(state->fe[0], fep);
+ state->get_frontend_internal = 0;
/* retune the other frontends with the found channel */
channel_status.status = CHANNEL_STATUS_PARAMETERS_SET;
@@ -2025,6 +2098,28 @@
/* turn off the diversity for the last frontend */
dib9000_fw_set_diversity_in(state->fe[index_frontend - 1], 0);
+ DibReleaseLock(&state->demod_lock);
+ if (state->pid_ctrl_index >= 0) {
+ u8 index_pid_filter_cmd;
+ u8 pid_ctrl_index = state->pid_ctrl_index;
+
+ state->pid_ctrl_index = -2;
+ for (index_pid_filter_cmd = 0;
+ index_pid_filter_cmd <= pid_ctrl_index;
+ index_pid_filter_cmd++) {
+ if (state->pid_ctrl[index_pid_filter_cmd].cmd == DIB9000_PID_FILTER_CTRL)
+ dib9000_fw_pid_filter_ctrl(state->fe[0],
+ state->pid_ctrl[index_pid_filter_cmd].onoff);
+ else if (state->pid_ctrl[index_pid_filter_cmd].cmd == DIB9000_PID_FILTER)
+ dib9000_fw_pid_filter(state->fe[0],
+ state->pid_ctrl[index_pid_filter_cmd].id,
+ state->pid_ctrl[index_pid_filter_cmd].pid,
+ state->pid_ctrl[index_pid_filter_cmd].onoff);
+ }
+ }
+ /* do not postpone any more the pid filtering */
+ state->pid_ctrl_index = -2;
+
return 0;
}
@@ -2041,6 +2136,7 @@
u8 index_frontend;
u16 lock = 0, lock_slave = 0;
+ DibAcquireLock(&state->demod_lock);
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
lock_slave |= dib9000_read_lock(state->fe[index_frontend]);
@@ -2059,6 +2155,8 @@
if ((lock & 0x0008) || (lock_slave & 0x0008))
*stat |= FE_HAS_LOCK;
+ DibReleaseLock(&state->demod_lock);
+
return 0;
}
@@ -2066,10 +2164,15 @@
{
struct dib9000_state *state = fe->demodulator_priv;
u16 *c;
+ int ret = 0;
+ DibAcquireLock(&state->demod_lock);
DibAcquireLock(&state->platform.risc.mem_mbx_lock);
- if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0)
- return -EIO;
+ if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
+ DibReleaseLock(&state->platform.risc.mem_mbx_lock);
+ ret = -EIO;
+ goto error;
+ }
dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR,
state->i2c_read_buffer, 16 * 2);
DibReleaseLock(&state->platform.risc.mem_mbx_lock);
@@ -2077,7 +2180,10 @@
c = (u16 *)state->i2c_read_buffer;
*ber = c[10] << 16 | c[11];
- return 0;
+
+error:
+ DibReleaseLock(&state->demod_lock);
+ return ret;
}
static int dib9000_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
@@ -2086,7 +2192,9 @@
u8 index_frontend;
u16 *c = (u16 *)state->i2c_read_buffer;
u16 val;
+ int ret = 0;
+ DibAcquireLock(&state->demod_lock);
*strength = 0;
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val);
@@ -2097,8 +2205,10 @@
}
DibAcquireLock(&state->platform.risc.mem_mbx_lock);
- if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0)
- return -EIO;
+ if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
+ ret = -EIO;
+ goto error;
+ }
dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2);
DibReleaseLock(&state->platform.risc.mem_mbx_lock);
@@ -2107,7 +2217,10 @@
*strength = 65535;
else
*strength += val;
- return 0;
+
+error:
+ DibReleaseLock(&state->demod_lock);
+ return ret;
}
static u32 dib9000_get_snr(struct dvb_frontend *fe)
@@ -2151,6 +2264,7 @@
u8 index_frontend;
u32 snr_master;
+ DibAcquireLock(&state->demod_lock);
snr_master = dib9000_get_snr(fe);
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
snr_master += dib9000_get_snr(state->fe[index_frontend]);
@@ -2161,6 +2275,8 @@
} else
*snr = 0;
+ DibReleaseLock(&state->demod_lock);
+
return 0;
}
@@ -2168,15 +2284,22 @@
{
struct dib9000_state *state = fe->demodulator_priv;
u16 *c = (u16 *)state->i2c_read_buffer;
+ int ret = 0;
+ DibAcquireLock(&state->demod_lock);
DibAcquireLock(&state->platform.risc.mem_mbx_lock);
- if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0)
- return -EIO;
+ if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) {
+ ret = -EIO;
+ goto error;
+ }
dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2);
DibReleaseLock(&state->platform.risc.mem_mbx_lock);
*unc = c[12];
- return 0;
+
+error:
+ DibReleaseLock(&state->demod_lock);
+ return ret;
}
int dib9000_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, u8 first_addr)
@@ -2322,6 +2445,10 @@
DibInitLock(&st->platform.risc.mbx_lock);
DibInitLock(&st->platform.risc.mem_lock);
DibInitLock(&st->platform.risc.mem_mbx_lock);
+ DibInitLock(&st->demod_lock);
+ st->get_frontend_internal = 0;
+
+ st->pid_ctrl_index = -2;
st->fe[0] = fe;
fe->demodulator_priv = st;
diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
index dc5d17a6..774d507 100644
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ b/drivers/media/dvb/frontends/dibx000_common.c
@@ -1,4 +1,5 @@
#include <linux/i2c.h>
+#include <linux/mutex.h>
#include "dibx000_common.h"
@@ -10,6 +11,13 @@
static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val)
{
+ int ret;
+
+ if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
mst->i2c_write_buffer[0] = (reg >> 8) & 0xff;
mst->i2c_write_buffer[1] = reg & 0xff;
mst->i2c_write_buffer[2] = (val >> 8) & 0xff;
@@ -21,11 +29,21 @@
mst->msg[0].buf = mst->i2c_write_buffer;
mst->msg[0].len = 4;
- return i2c_transfer(mst->i2c_adap, mst->msg, 1) != 1 ? -EREMOTEIO : 0;
+ ret = i2c_transfer(mst->i2c_adap, mst->msg, 1) != 1 ? -EREMOTEIO : 0;
+ mutex_unlock(&mst->i2c_buffer_lock);
+
+ return ret;
}
static u16 dibx000_read_word(struct dibx000_i2c_master *mst, u16 reg)
{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
mst->i2c_write_buffer[0] = reg >> 8;
mst->i2c_write_buffer[1] = reg & 0xff;
@@ -42,7 +60,10 @@
if (i2c_transfer(mst->i2c_adap, mst->msg, 2) != 2)
dprintk("i2c read error on %d", reg);
- return (mst->i2c_read_buffer[0] << 8) | mst->i2c_read_buffer[1];
+ ret = (mst->i2c_read_buffer[0] << 8) | mst->i2c_read_buffer[1];
+ mutex_unlock(&mst->i2c_buffer_lock);
+
+ return ret;
}
static int dibx000_is_i2c_done(struct dibx000_i2c_master *mst)
@@ -257,6 +278,7 @@
struct i2c_msg msg[], int num)
{
struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
+ int ret;
if (num > 32) {
dprintk("%s: too much I2C message to be transmitted (%i).\
@@ -264,10 +286,15 @@
return -ENOMEM;
}
- memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
-
dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_6_7);
+ if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+
+ memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
+
/* open the gate */
dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1);
mst->msg[0].addr = mst->i2c_addr;
@@ -282,7 +309,11 @@
mst->msg[num + 1].buf = &mst->i2c_write_buffer[4];
mst->msg[num + 1].len = 4;
- return i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? num : -EIO;
+ ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ?
+ num : -EIO);
+
+ mutex_unlock(&mst->i2c_buffer_lock);
+ return ret;
}
static struct i2c_algorithm dibx000_i2c_gated_gpio67_algo = {
@@ -294,6 +325,7 @@
struct i2c_msg msg[], int num)
{
struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
+ int ret;
if (num > 32) {
dprintk("%s: too much I2C message to be transmitted (%i).\
@@ -301,10 +333,14 @@
return -ENOMEM;
}
- memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
-
dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
+ if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+ memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
+
/* open the gate */
dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1);
mst->msg[0].addr = mst->i2c_addr;
@@ -319,7 +355,10 @@
mst->msg[num + 1].buf = &mst->i2c_write_buffer[4];
mst->msg[num + 1].len = 4;
- return i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? num : -EIO;
+ ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ?
+ num : -EIO);
+ mutex_unlock(&mst->i2c_buffer_lock);
+ return ret;
}
static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = {
@@ -390,8 +429,18 @@
int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev,
struct i2c_adapter *i2c_adap, u8 i2c_addr)
{
- u8 tx[4];
- struct i2c_msg m = {.addr = i2c_addr >> 1,.buf = tx,.len = 4 };
+ int ret;
+
+ mutex_init(&mst->i2c_buffer_lock);
+ if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return -EINVAL;
+ }
+ memset(mst->msg, 0, sizeof(struct i2c_msg));
+ mst->msg[0].addr = i2c_addr >> 1;
+ mst->msg[0].flags = 0;
+ mst->msg[0].buf = mst->i2c_write_buffer;
+ mst->msg[0].len = 4;
mst->device_rev = device_rev;
mst->i2c_adap = i2c_adap;
@@ -431,9 +480,12 @@
"DiBX000: could not initialize the master i2c_adapter\n");
/* initialize the i2c-master by closing the gate */
- dibx000_i2c_gate_ctrl(mst, tx, 0, 0);
+ dibx000_i2c_gate_ctrl(mst, mst->i2c_write_buffer, 0, 0);
- return i2c_transfer(i2c_adap, &m, 1) == 1;
+ ret = (i2c_transfer(i2c_adap, mst->msg, 1) == 1);
+ mutex_unlock(&mst->i2c_buffer_lock);
+
+ return ret;
}
EXPORT_SYMBOL(dibx000_init_i2c_master);
diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h
index f031165..5e01147 100644
--- a/drivers/media/dvb/frontends/dibx000_common.h
+++ b/drivers/media/dvb/frontends/dibx000_common.h
@@ -33,6 +33,7 @@
struct i2c_msg msg[34];
u8 i2c_write_buffer[8];
u8 i2c_read_buffer[2];
+ struct mutex i2c_buffer_lock;
};
extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb/frontends/drxd_hard.c
index 2238bf0..88e46f4 100644
--- a/drivers/media/dvb/frontends/drxd_hard.c
+++ b/drivers/media/dvb/frontends/drxd_hard.c
@@ -889,10 +889,15 @@
u32 R2 = state->if_agc_cfg.R2;
u32 R3 = state->if_agc_cfg.R3;
- u32 Vmax = (3300 * R2) / (R1 + R2);
- u32 Rpar = (R2 * R3) / (R3 + R2);
- u32 Vmin = (3300 * Rpar) / (R1 + Rpar);
- u32 Vout = Vmin + ((Vmax - Vmin) * Value) / 1024;
+ u32 Vmax, Rpar, Vmin, Vout;
+
+ if (R2 == 0 && (R1 == 0 || R3 == 0))
+ return 0;
+
+ Vmax = (3300 * R2) / (R1 + R2);
+ Rpar = (R2 * R3) / (R3 + R2);
+ Vmin = (3300 * Rpar) / (R1 + Rpar);
+ Vout = Vmin + ((Vmax - Vmin) * Value) / 1024;
*pValue = Vout;
}
@@ -926,16 +931,15 @@
const u8 *pMCImage, u32 Length)
{
u8 *pSrc;
- u16 Flags;
u32 Address;
u16 nBlocks;
u16 BlockSize;
- u16 BlockCRC;
u32 offset = 0;
int i, status = 0;
pSrc = (u8 *) pMCImage;
- Flags = (pSrc[0] << 8) | pSrc[1];
+ /* We're not using Flags */
+ /* Flags = (pSrc[0] << 8) | pSrc[1]; */
pSrc += sizeof(u16);
offset += sizeof(u16);
nBlocks = (pSrc[0] << 8) | pSrc[1];
@@ -952,11 +956,13 @@
pSrc += sizeof(u16);
offset += sizeof(u16);
- Flags = (pSrc[0] << 8) | pSrc[1];
+ /* We're not using Flags */
+ /* u16 Flags = (pSrc[0] << 8) | pSrc[1]; */
pSrc += sizeof(u16);
offset += sizeof(u16);
- BlockCRC = (pSrc[0] << 8) | pSrc[1];
+ /* We're not using BlockCRC */
+ /* u16 BlockCRC = (pSrc[0] << 8) | pSrc[1]; */
pSrc += sizeof(u16);
offset += sizeof(u16);
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
index 41b0838..f6431ef 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -6211,6 +6211,14 @@
u32 IF;
dprintk(1, "\n");
+
+ if (!fe->ops.tuner_ops.get_if_frequency) {
+ printk(KERN_ERR
+ "drxk: Error: get_if_frequency() not defined at tuner. Can't work without it!\n");
+ return -EINVAL;
+ }
+
+
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (fe->ops.tuner_ops.set_params)
@@ -6218,7 +6226,7 @@
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
state->param = *p;
- fe->ops.tuner_ops.get_frequency(fe, &IF);
+ fe->ops.tuner_ops.get_if_frequency(fe, &IF);
Start(state, 0, IF);
/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb/frontends/it913x-fe-priv.h
new file mode 100644
index 0000000..1c6fb4b
--- /dev/null
+++ b/drivers/media/dvb/frontends/it913x-fe-priv.h
@@ -0,0 +1,336 @@
+
+struct it913xset { u32 pro;
+ u32 address;
+ u8 reg[15];
+ u8 count;
+};
+
+struct adctable { u32 adcFrequency;
+ u32 bandwidth;
+ u32 coeff_1_2048;
+ u32 coeff_1_4096;
+ u32 coeff_1_8191;
+ u32 coeff_1_8192;
+ u32 coeff_1_8193;
+ u32 coeff_2_2k;
+ u32 coeff_2_4k;
+ u32 coeff_2_8k;
+ u16 bfsfcw_fftinx_ratio;
+ u16 fftinx_bfsfcw_ratio;
+};
+
+/* clock and coeff tables only table 3 is used with IT9137*/
+/* TODO other tables relate AF9035 may be removed */
+static struct adctable tab1[] = {
+ { 20156250, BANDWIDTH_6_MHZ,
+ 0x02b8ba6e, 0x015c5d37, 0x00ae340d, 0x00ae2e9b, 0x00ae292a,
+ 0x015c5d37, 0x00ae2e9b, 0x0057174e, 0x02f1, 0x015c },
+ { 20156250, BANDWIDTH_7_MHZ,
+ 0x032cd980, 0x01966cc0, 0x00cb3cba, 0x00cb3660, 0x00cb3007,
+ 0x01966cc0, 0x00cb3660, 0x00659b30, 0x0285, 0x0196 },
+ { 20156250, BANDWIDTH_8_MHZ,
+ 0x03a0f893, 0x01d07c49, 0x00e84567, 0x00e83e25, 0x00e836e3,
+ 0x01d07c49, 0x00e83e25, 0x00741f12, 0x0234, 0x01d0 },
+ { 20156250, BANDWIDTH_5_MHZ,
+ 0x02449b5c, 0x01224dae, 0x00912b60, 0x009126d7, 0x0091224e,
+ 0x01224dae, 0x009126d7, 0x0048936b, 0x0387, 0x0122 }
+};
+
+static struct adctable tab2[] = {
+ { 20187500, BANDWIDTH_6_MHZ,
+ 0x02b7a654, 0x015bd32a, 0x00adef04, 0x00ade995, 0x00ade426,
+ 0x015bd32a, 0x00ade995, 0x0056f4ca, 0x02f2, 0x015c },
+ { 20187500, BANDWIDTH_7_MHZ,
+ 0x032b9761, 0x0195cbb1, 0x00caec30, 0x00cae5d8, 0x00cadf81,
+ 0x0195cbb1, 0x00cae5d8, 0x006572ec, 0x0286, 0x0196 },
+ { 20187500, BANDWIDTH_8_MHZ,
+ 0x039f886f, 0x01cfc438, 0x00e7e95b, 0x00e7e21c, 0x00e7dadd,
+ 0x01cfc438, 0x00e7e21c, 0x0073f10e, 0x0235, 0x01d0 },
+ { 20187500, BANDWIDTH_5_MHZ,
+ 0x0243b546, 0x0121daa3, 0x0090f1d9, 0x0090ed51, 0x0090e8ca,
+ 0x0121daa3, 0x0090ed51, 0x004876a9, 0x0388, 0x0122 }
+
+};
+
+static struct adctable tab3[] = {
+ { 20250000, BANDWIDTH_6_MHZ,
+ 0x02b580ad, 0x015ac057, 0x00ad6597, 0x00ad602b, 0x00ad5ac1,
+ 0x015ac057, 0x00ad602b, 0x0056b016, 0x02f4, 0x015b },
+ { 20250000, BANDWIDTH_7_MHZ,
+ 0x03291620, 0x01948b10, 0x00ca4bda, 0x00ca4588, 0x00ca3f36,
+ 0x01948b10, 0x00ca4588, 0x006522c4, 0x0288, 0x0195 },
+ { 20250000, BANDWIDTH_8_MHZ,
+ 0x039cab92, 0x01ce55c9, 0x00e7321e, 0x00e72ae4, 0x00e723ab,
+ 0x01ce55c9, 0x00e72ae4, 0x00739572, 0x0237, 0x01ce },
+ { 20250000, BANDWIDTH_5_MHZ,
+ 0x0241eb3b, 0x0120f59e, 0x00907f53, 0x00907acf, 0x0090764b,
+ 0x0120f59e, 0x00907acf, 0x00483d67, 0x038b, 0x0121 }
+
+};
+
+static struct adctable tab4[] = {
+ { 20583333, BANDWIDTH_6_MHZ,
+ 0x02aa4598, 0x015522cc, 0x00aa96bb, 0x00aa9166, 0x00aa8c12,
+ 0x015522cc, 0x00aa9166, 0x005548b3, 0x0300, 0x0155 },
+ { 20583333, BANDWIDTH_7_MHZ,
+ 0x031bfbdc, 0x018dfdee, 0x00c7052f, 0x00c6fef7, 0x00c6f8bf,
+ 0x018dfdee, 0x00c6fef7, 0x00637f7b, 0x0293, 0x018e },
+ { 20583333, BANDWIDTH_8_MHZ,
+ 0x038db21f, 0x01c6d910, 0x00e373a3, 0x00e36c88, 0x00e3656d,
+ 0x01c6d910, 0x00e36c88, 0x0071b644, 0x0240, 0x01c7 },
+ { 20583333, BANDWIDTH_5_MHZ,
+ 0x02388f54, 0x011c47aa, 0x008e2846, 0x008e23d5, 0x008e1f64,
+ 0x011c47aa, 0x008e23d5, 0x004711ea, 0x039a, 0x011c }
+
+};
+
+static struct adctable tab5[] = {
+ { 20416667, BANDWIDTH_6_MHZ,
+ 0x02afd765, 0x0157ebb3, 0x00abfb39, 0x00abf5d9, 0x00abf07a,
+ 0x0157ebb3, 0x00abf5d9, 0x0055faed, 0x02fa, 0x0158 },
+ { 20416667, BANDWIDTH_7_MHZ,
+ 0x03227b4b, 0x01913da6, 0x00c8a518, 0x00c89ed3, 0x00c8988e,
+ 0x01913da6, 0x00c89ed3, 0x00644f69, 0x028d, 0x0191 },
+ { 20416667, BANDWIDTH_8_MHZ,
+ 0x03951f32, 0x01ca8f99, 0x00e54ef7, 0x00e547cc, 0x00e540a2,
+ 0x01ca8f99, 0x00e547cc, 0x0072a3e6, 0x023c, 0x01cb },
+ { 20416667, BANDWIDTH_5_MHZ,
+ 0x023d337f, 0x011e99c0, 0x008f515a, 0x008f4ce0, 0x008f4865,
+ 0x011e99c0, 0x008f4ce0, 0x0047a670, 0x0393, 0x011f }
+
+};
+
+static struct adctable tab6[] = {
+ { 20480000, BANDWIDTH_6_MHZ,
+ 0x02adb6db, 0x0156db6e, 0x00ab7312, 0x00ab6db7, 0x00ab685c,
+ 0x0156db6e, 0x00ab6db7, 0x0055b6db, 0x02fd, 0x0157 },
+ { 20480000, BANDWIDTH_7_MHZ,
+ 0x03200000, 0x01900000, 0x00c80640, 0x00c80000, 0x00c7f9c0,
+ 0x01900000, 0x00c80000, 0x00640000, 0x028f, 0x0190 },
+ { 20480000, BANDWIDTH_8_MHZ,
+ 0x03924925, 0x01c92492, 0x00e4996e, 0x00e49249, 0x00e48b25,
+ 0x01c92492, 0x00e49249, 0x00724925, 0x023d, 0x01c9 },
+ { 20480000, BANDWIDTH_5_MHZ,
+ 0x023b6db7, 0x011db6db, 0x008edfe5, 0x008edb6e, 0x008ed6f7,
+ 0x011db6db, 0x008edb6e, 0x00476db7, 0x0396, 0x011e }
+};
+
+static struct adctable tab7[] = {
+ { 20500000, BANDWIDTH_6_MHZ,
+ 0x02ad0b99, 0x015685cc, 0x00ab4840, 0x00ab42e6, 0x00ab3d8c,
+ 0x015685cc, 0x00ab42e6, 0x0055a173, 0x02fd, 0x0157 },
+ { 20500000, BANDWIDTH_7_MHZ,
+ 0x031f3832, 0x018f9c19, 0x00c7d44b, 0x00c7ce0c, 0x00c7c7ce,
+ 0x018f9c19, 0x00c7ce0c, 0x0063e706, 0x0290, 0x0190 },
+ { 20500000, BANDWIDTH_8_MHZ,
+ 0x039164cb, 0x01c8b266, 0x00e46056, 0x00e45933, 0x00e45210,
+ 0x01c8b266, 0x00e45933, 0x00722c99, 0x023e, 0x01c9 },
+ { 20500000, BANDWIDTH_5_MHZ,
+ 0x023adeff, 0x011d6f80, 0x008ebc36, 0x008eb7c0, 0x008eb34a,
+ 0x011d6f80, 0x008eb7c0, 0x00475be0, 0x0396, 0x011d }
+
+};
+
+static struct adctable tab8[] = {
+ { 20625000, BANDWIDTH_6_MHZ,
+ 0x02a8e4bd, 0x0154725e, 0x00aa3e81, 0x00aa392f, 0x00aa33de,
+ 0x0154725e, 0x00aa392f, 0x00551c98, 0x0302, 0x0154 },
+ { 20625000, BANDWIDTH_7_MHZ,
+ 0x031a6032, 0x018d3019, 0x00c69e41, 0x00c6980c, 0x00c691d8,
+ 0x018d3019, 0x00c6980c, 0x00634c06, 0x0294, 0x018d },
+ { 20625000, BANDWIDTH_8_MHZ,
+ 0x038bdba6, 0x01c5edd3, 0x00e2fe02, 0x00e2f6ea, 0x00e2efd2,
+ 0x01c5edd3, 0x00e2f6ea, 0x00717b75, 0x0242, 0x01c6 },
+ { 20625000, BANDWIDTH_5_MHZ,
+ 0x02376948, 0x011bb4a4, 0x008ddec1, 0x008dda52, 0x008dd5e3,
+ 0x011bb4a4, 0x008dda52, 0x0046ed29, 0x039c, 0x011c }
+
+};
+
+struct table {
+ u32 xtal;
+ struct adctable *table;
+};
+
+static struct table fe_clockTable[] = {
+ {12000000, tab3}, /* FPGA */
+ {16384000, tab6}, /* 16.38MHz */
+ {20480000, tab6}, /* 20.48MHz */
+ {36000000, tab3}, /* 36.00MHz */
+ {30000000, tab1}, /* 30.00MHz */
+ {26000000, tab4}, /* 26.00MHz */
+ {28000000, tab5}, /* 28.00MHz */
+ {32000000, tab7}, /* 32.00MHz */
+ {34000000, tab2}, /* 34.00MHz */
+ {24000000, tab1}, /* 24.00MHz */
+ {22000000, tab8}, /* 22.00MHz */
+ {12000000, tab3} /* 12.00MHz */
+};
+
+/* fe get */
+fe_code_rate_t fe_code[] = {
+ FEC_1_2,
+ FEC_2_3,
+ FEC_3_4,
+ FEC_5_6,
+ FEC_7_8,
+ FEC_NONE,
+};
+
+fe_guard_interval_t fe_gi[] = {
+ GUARD_INTERVAL_1_32,
+ GUARD_INTERVAL_1_16,
+ GUARD_INTERVAL_1_8,
+ GUARD_INTERVAL_1_4,
+};
+
+fe_hierarchy_t fe_hi[] = {
+ HIERARCHY_NONE,
+ HIERARCHY_1,
+ HIERARCHY_2,
+ HIERARCHY_4,
+};
+
+fe_transmit_mode_t fe_mode[] = {
+ TRANSMISSION_MODE_2K,
+ TRANSMISSION_MODE_8K,
+ TRANSMISSION_MODE_4K,
+};
+
+fe_modulation_t fe_con[] = {
+ QPSK,
+ QAM_16,
+ QAM_64,
+};
+
+/* Standard demodulator functions */
+static struct it913xset set_solo_fe[] = {
+ {PRO_LINK, DVBT_INTEN, {0x04}, 0x01},
+ {PRO_LINK, DVBT_ENABLE, {0x05}, 0x01},
+ {PRO_DMOD, MP2IF_MPEG_PAR_MODE, {0x00}, 0x01},
+ {PRO_LINK, HOSTB_MPEG_SER_MODE, {0x00}, 0x01},
+ {PRO_LINK, HOSTB_MPEG_PAR_MODE, {0x00}, 0x01},
+ {PRO_DMOD, DCA_UPPER_CHIP, {0x00}, 0x01},
+ {PRO_LINK, HOSTB_DCA_UPPER, {0x00}, 0x01},
+ {PRO_DMOD, DCA_LOWER_CHIP, {0x00}, 0x01},
+ {PRO_LINK, HOSTB_DCA_LOWER, {0x00}, 0x01},
+ {PRO_DMOD, DCA_PLATCH, {0x00}, 0x01},
+ {PRO_DMOD, DCA_FPGA_LATCH, {0x00}, 0x01},
+ {PRO_DMOD, DCA_STAND_ALONE, {0x01}, 0x01},
+ {PRO_DMOD, DCA_ENABLE, {0x00}, 0x01},
+ {PRO_DMOD, MP2IF_MPEG_PAR_MODE, {0x00}, 0x01},
+ {PRO_DMOD, BFS_FCW, {0x00, 0x00, 0x00}, 0x03},
+ {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
+};
+
+
+static struct it913xset init_1[] = {
+ {PRO_LINK, LOCK3_OUT, {0x01}, 0x01},
+ {PRO_LINK, PADMISCDRSR, {0x01}, 0x01},
+ {PRO_LINK, PADMISCDR2, {0x00}, 0x01},
+ {PRO_LINK, PADMISCDR4, {0x00}, 0x01}, /* Power up */
+ {PRO_LINK, PADMISCDR8, {0x00}, 0x01},
+ {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */
+};
+
+/* ---------IT9137 0x38 tuner init---------- */
+static struct it913xset it9137_set[] = {
+ {PRO_DMOD, 0x0043, {0x00}, 0x01},
+ {PRO_DMOD, 0x0046, {0x38}, 0x01},
+ {PRO_DMOD, 0x0051, {0x01}, 0x01},
+ {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02},
+ {PRO_DMOD, 0x0068, {0x0a}, 0x01},
+ {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03},
+ {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xc8, 0x01}, 0x05},
+ {PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02},
+ {PRO_DMOD, 0x0081, { 0x0a, 0x12, 0x02, 0x0a, 0x03, 0xc8, 0xb8,
+ 0xd0, 0xc3, 0x01 }, 0x0a},
+ {PRO_DMOD, 0x008e, {0x01}, 0x01},
+ {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05},
+ {PRO_DMOD, 0x0099, {0x01}, 0x01},
+ {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02},
+ {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02},
+ {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04},
+ {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02},
+ {PRO_DMOD, 0x00b0, {0x01}, 0x01},
+ {PRO_DMOD, 0x00b3, {0x02, 0x32}, 0x02},
+ {PRO_DMOD, 0x00b6, {0x14}, 0x01},
+ {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03},
+ {PRO_DMOD, 0x00c4, {0x00}, 0x01},
+ {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02},
+ {PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03},
+ {PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03},
+ {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03},
+ {PRO_DMOD, 0x00fc, { 0x02, 0x02, 0x02, 0x09, 0x50, 0x7b, 0x77,
+ 0x00, 0x02, 0xc8, 0x05, 0x7b }, 0x0c},
+ {PRO_DMOD, 0x0109, {0x02}, 0x01},
+ {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02},
+ {PRO_DMOD, 0x011a, {0xc8, 0x7b, 0xbc, 0xa0}, 0x04},
+ {PRO_DMOD, 0x0122, {0x02, 0x18, 0xc3}, 0x03},
+ {PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02},
+ {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04},
+ {PRO_DMOD, 0x0137, {0x01, 0x00, 0x07, 0x00, 0x06}, 0x05},
+ {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc8}, 0x04},
+ {PRO_DMOD, 0xf130, {0x04}, 0x01},
+ {PRO_DMOD, 0xf132, {0x04}, 0x01},
+ {PRO_DMOD, 0xf144, {0x1a}, 0x01},
+ {PRO_DMOD, 0xf146, {0x00}, 0x01},
+ {PRO_DMOD, 0xf14a, {0x01}, 0x01},
+ {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02},
+ {PRO_DMOD, 0xf14f, {0x04}, 0x01},
+ {PRO_DMOD, 0xf158, {0x7f}, 0x01},
+ {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02},
+ {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02},
+ {PRO_DMOD, 0xf163, {0x05}, 0x01},
+ {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03},
+ {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02},
+ {PRO_DMOD, 0xf183, {0x01}, 0x01},
+ {PRO_DMOD, 0xf19d, {0x40}, 0x01},
+ {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02},
+ {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02},
+ {PRO_DMOD, 0xf204, {0x10}, 0x01},
+ {PRO_DMOD, 0xf214, {0x00}, 0x01},
+ {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04},
+ {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05},
+ {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04},
+ {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03},
+ {PRO_DMOD, 0xf55f, {0x0a}, 0x01},
+ {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02},
+ {PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02},
+ {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03},
+ {PRO_DMOD, 0xf5f8, {0x01}, 0x01},
+ {PRO_DMOD, 0xf5fd, {0x01}, 0x01},
+ {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17,
+ 0x1f }, 0x08},
+ {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04},
+ {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04},
+ {PRO_DMOD, 0xf78b, {0x01}, 0x01},
+ {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03},
+ {PRO_DMOD, 0xf905, {0x01}, 0x01},
+ {PRO_DMOD, 0xfb06, {0x03}, 0x01},
+ {PRO_DMOD, 0xfd8b, {0x00}, 0x01},
+ {PRO_LINK, GPIOH5_EN, {0x01}, 0x01},
+ {PRO_LINK, GPIOH5_ON, {0x01}, 0x01},
+ {PRO_LINK, GPIOH5_O, {0x00}, 0x01},
+ {PRO_LINK, GPIOH5_O, {0x01}, 0x01},
+ {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
+};
+
+static struct it913xset it9137_tuner_off[] = {
+ {PRO_DMOD, 0xfba8, {0x01}, 0x01}, /* Tuner Clock Off */
+ {PRO_DMOD, 0xec40, {0x00}, 0x01}, /* Power Down Tuner */
+ {PRO_DMOD, 0xec02, {0x3f, 0x1f, 0x3f, 0x3f}, 0x04},
+ {PRO_DMOD, 0xec3f, {0x01}, 0x01},
+ {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
+};
+
+static struct it913xset set_it9137_template[] = {
+ {PRO_DMOD, 0xee06, {0x00}, 0x01},
+ {PRO_DMOD, 0xec56, {0x00}, 0x01},
+ {PRO_DMOD, 0xec4c, {0x00}, 0x01},
+ {PRO_DMOD, 0xec4d, {0x00}, 0x01},
+ {PRO_DMOD, 0xec4e, {0x00}, 0x01},
+ {PRO_DMOD, 0xec4f, {0x00}, 0x01},
+ {PRO_DMOD, 0xec50, {0x00}, 0x01},
+ {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */
+};
diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb/frontends/it913x-fe.c
new file mode 100644
index 0000000..d4bd24e
--- /dev/null
+++ b/drivers/media/dvb/frontends/it913x-fe.c
@@ -0,0 +1,839 @@
+/*
+ * Driver for it913x-fe Frontend
+ *
+ * with support for on chip it9137 integral tuner
+ *
+ * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com)
+ * IT9137 Copyright (C) ITE Tech Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "dvb_frontend.h"
+#include "it913x-fe.h"
+#include "it913x-fe-priv.h"
+
+static int it913x_debug;
+
+module_param_named(debug, it913x_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+#define dprintk(level, args...) do { \
+ if (level & it913x_debug) \
+ printk(KERN_DEBUG "it913x-fe: " args); \
+} while (0)
+
+#define deb_info(args...) dprintk(0x01, args)
+#define debug_data_snipet(level, name, p) \
+ dprintk(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
+ *p, *(p+1), *(p+2), *(p+3), *(p+4), \
+ *(p+5), *(p+6), *(p+7));
+
+struct it913x_fe_state {
+ struct dvb_frontend frontend;
+ struct i2c_adapter *i2c_adap;
+ u8 i2c_addr;
+ u32 frequency;
+ u8 adf;
+ u32 crystalFrequency;
+ u32 adcFrequency;
+ u8 tuner_type;
+ struct adctable *table;
+ fe_status_t it913x_status;
+ u16 tun_xtal;
+ u8 tun_fdiv;
+ u8 tun_clk_mode;
+ u32 tun_fn_min;
+};
+
+static int it913x_read_reg(struct it913x_fe_state *state,
+ u32 reg, u8 *data, u8 count)
+{
+ int ret;
+ u8 pro = PRO_DMOD; /* All reads from demodulator */
+ u8 b[4];
+ struct i2c_msg msg[2] = {
+ { .addr = state->i2c_addr + (pro << 1), .flags = 0,
+ .buf = b, .len = sizeof(b) },
+ { .addr = state->i2c_addr + (pro << 1), .flags = I2C_M_RD,
+ .buf = data, .len = count }
+ };
+ b[0] = (u8) reg >> 24;
+ b[1] = (u8)(reg >> 16) & 0xff;
+ b[2] = (u8)(reg >> 8) & 0xff;
+ b[3] = (u8) reg & 0xff;
+
+ ret = i2c_transfer(state->i2c_adap, msg, 2);
+
+ return ret;
+}
+
+static int it913x_read_reg_u8(struct it913x_fe_state *state, u32 reg)
+{
+ int ret;
+ u8 b[1];
+ ret = it913x_read_reg(state, reg, &b[0], sizeof(b));
+ return (ret < 0) ? -ENODEV : b[0];
+}
+
+static int it913x_write(struct it913x_fe_state *state,
+ u8 pro, u32 reg, u8 buf[], u8 count)
+{
+ u8 b[256];
+ struct i2c_msg msg[1] = {
+ { .addr = state->i2c_addr + (pro << 1), .flags = 0,
+ .buf = b, .len = count + 4 }
+ };
+ int ret;
+
+ b[0] = (u8) reg >> 24;
+ b[1] = (u8)(reg >> 16) & 0xff;
+ b[2] = (u8)(reg >> 8) & 0xff;
+ b[3] = (u8) reg & 0xff;
+ memcpy(&b[4], buf, count);
+
+ ret = i2c_transfer(state->i2c_adap, msg, 1);
+
+ if (ret < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int it913x_write_reg(struct it913x_fe_state *state,
+ u8 pro, u32 reg, u32 data)
+{
+ int ret;
+ u8 b[4];
+ u8 s;
+
+ b[0] = data >> 24;
+ b[1] = (data >> 16) & 0xff;
+ b[2] = (data >> 8) & 0xff;
+ b[3] = data & 0xff;
+ /* expand write as needed */
+ if (data < 0x100)
+ s = 3;
+ else if (data < 0x1000)
+ s = 2;
+ else if (data < 0x100000)
+ s = 1;
+ else
+ s = 0;
+
+ ret = it913x_write(state, pro, reg, &b[s], sizeof(b) - s);
+
+ return ret;
+}
+
+static int it913x_fe_script_loader(struct it913x_fe_state *state,
+ struct it913xset *loadscript)
+{
+ int ret, i;
+ if (loadscript == NULL)
+ return -EINVAL;
+
+ for (i = 0; i < 1000; ++i) {
+ if (loadscript[i].pro == 0xff)
+ break;
+ ret = it913x_write(state, loadscript[i].pro,
+ loadscript[i].address,
+ loadscript[i].reg, loadscript[i].count);
+ if (ret < 0)
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int it913x_init_tuner(struct it913x_fe_state *state)
+{
+ int ret, i, reg;
+ u8 val, nv_val;
+ u8 nv[] = {48, 32, 24, 16, 12, 8, 6, 4, 2};
+ u8 b[2];
+
+ reg = it913x_read_reg_u8(state, 0xec86);
+ switch (reg) {
+ case 0:
+ state->tun_clk_mode = reg;
+ state->tun_xtal = 2000;
+ state->tun_fdiv = 3;
+ val = 16;
+ break;
+ case -ENODEV:
+ return -ENODEV;
+ case 1:
+ default:
+ state->tun_clk_mode = reg;
+ state->tun_xtal = 640;
+ state->tun_fdiv = 1;
+ val = 6;
+ break;
+ }
+
+ reg = it913x_read_reg_u8(state, 0xed03);
+
+ if (reg < 0)
+ return -ENODEV;
+ else if (reg < sizeof(nv))
+ nv_val = nv[reg];
+ else
+ nv_val = 2;
+
+ for (i = 0; i < 50; i++) {
+ ret = it913x_read_reg(state, 0xed23, &b[0], sizeof(b));
+ reg = (b[1] << 8) + b[0];
+ if (reg > 0)
+ break;
+ if (ret < 0)
+ return -ENODEV;
+ udelay(2000);
+ }
+ state->tun_fn_min = state->tun_xtal * reg;
+ state->tun_fn_min /= (state->tun_fdiv * nv_val);
+ deb_info("Tuner fn_min %d", state->tun_fn_min);
+
+ for (i = 0; i < 50; i++) {
+ reg = it913x_read_reg_u8(state, 0xec82);
+ if (reg > 0)
+ break;
+ if (reg < 0)
+ return -ENODEV;
+ udelay(2000);
+ }
+
+ return it913x_write_reg(state, PRO_DMOD, 0xed81, val);
+}
+
+static int it9137_set_tuner(struct it913x_fe_state *state,
+ enum fe_bandwidth bandwidth, u32 frequency_m)
+{
+ struct it913xset *set_tuner = set_it9137_template;
+ int ret, reg;
+ u32 frequency = frequency_m / 1000;
+ u32 freq, temp_f, tmp;
+ u16 iqik_m_cal;
+ u16 n_div;
+ u8 n;
+ u8 l_band;
+ u8 lna_band;
+ u8 bw;
+
+ deb_info("Tuner Frequency %d Bandwidth %d", frequency, bandwidth);
+
+ if (frequency >= 51000 && frequency <= 440000) {
+ l_band = 0;
+ lna_band = 0;
+ } else if (frequency > 440000 && frequency <= 484000) {
+ l_band = 1;
+ lna_band = 1;
+ } else if (frequency > 484000 && frequency <= 533000) {
+ l_band = 1;
+ lna_band = 2;
+ } else if (frequency > 533000 && frequency <= 587000) {
+ l_band = 1;
+ lna_band = 3;
+ } else if (frequency > 587000 && frequency <= 645000) {
+ l_band = 1;
+ lna_band = 4;
+ } else if (frequency > 645000 && frequency <= 710000) {
+ l_band = 1;
+ lna_band = 5;
+ } else if (frequency > 710000 && frequency <= 782000) {
+ l_band = 1;
+ lna_band = 6;
+ } else if (frequency > 782000 && frequency <= 860000) {
+ l_band = 1;
+ lna_band = 7;
+ } else if (frequency > 1450000 && frequency <= 1492000) {
+ l_band = 1;
+ lna_band = 0;
+ } else if (frequency > 1660000 && frequency <= 1685000) {
+ l_band = 1;
+ lna_band = 1;
+ } else
+ return -EINVAL;
+ set_tuner[0].reg[0] = lna_band;
+
+ if (bandwidth == BANDWIDTH_5_MHZ)
+ bw = 0;
+ else if (bandwidth == BANDWIDTH_6_MHZ)
+ bw = 2;
+ else if (bandwidth == BANDWIDTH_7_MHZ)
+ bw = 4;
+ else if (bandwidth == BANDWIDTH_8_MHZ)
+ bw = 6;
+ else
+ bw = 6;
+
+ set_tuner[1].reg[0] = bw;
+ set_tuner[2].reg[0] = 0xa0 | (l_band << 3);
+
+ if (frequency > 53000 && frequency <= 74000) {
+ n_div = 48;
+ n = 0;
+ } else if (frequency > 74000 && frequency <= 111000) {
+ n_div = 32;
+ n = 1;
+ } else if (frequency > 111000 && frequency <= 148000) {
+ n_div = 24;
+ n = 2;
+ } else if (frequency > 148000 && frequency <= 222000) {
+ n_div = 16;
+ n = 3;
+ } else if (frequency > 222000 && frequency <= 296000) {
+ n_div = 12;
+ n = 4;
+ } else if (frequency > 296000 && frequency <= 445000) {
+ n_div = 8;
+ n = 5;
+ } else if (frequency > 445000 && frequency <= state->tun_fn_min) {
+ n_div = 6;
+ n = 6;
+ } else if (frequency > state->tun_fn_min && frequency <= 950000) {
+ n_div = 4;
+ n = 7;
+ } else if (frequency > 1450000 && frequency <= 1680000) {
+ n_div = 2;
+ n = 0;
+ } else
+ return -EINVAL;
+
+ reg = it913x_read_reg_u8(state, 0xed81);
+ iqik_m_cal = (u16)reg * n_div;
+
+ if (reg < 0x20) {
+ if (state->tun_clk_mode == 0)
+ iqik_m_cal = (iqik_m_cal * 9) >> 5;
+ else
+ iqik_m_cal >>= 1;
+ } else {
+ iqik_m_cal = 0x40 - iqik_m_cal;
+ if (state->tun_clk_mode == 0)
+ iqik_m_cal = ~((iqik_m_cal * 9) >> 5);
+ else
+ iqik_m_cal = ~(iqik_m_cal >> 1);
+ }
+
+ temp_f = frequency * (u32)n_div * (u32)state->tun_fdiv;
+ freq = temp_f / state->tun_xtal;
+ tmp = freq * state->tun_xtal;
+
+ if ((temp_f - tmp) >= (state->tun_xtal >> 1))
+ freq++;
+
+ freq += (u32) n << 13;
+ /* Frequency OMEGA_IQIK_M_CAL_MID*/
+ temp_f = freq + (u32)iqik_m_cal;
+
+ set_tuner[3].reg[0] = temp_f & 0xff;
+ set_tuner[4].reg[0] = (temp_f >> 8) & 0xff;
+
+ deb_info("High Frequency = %04x", temp_f);
+
+ /* Lower frequency */
+ set_tuner[5].reg[0] = freq & 0xff;
+ set_tuner[6].reg[0] = (freq >> 8) & 0xff;
+
+ deb_info("low Frequency = %04x", freq);
+
+ ret = it913x_fe_script_loader(state, set_tuner);
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int it913x_fe_select_bw(struct it913x_fe_state *state,
+ enum fe_bandwidth bandwidth, u32 adcFrequency)
+{
+ int ret, i;
+ u8 buffer[256];
+ u32 coeff[8];
+ u16 bfsfcw_fftinx_ratio;
+ u16 fftinx_bfsfcw_ratio;
+ u8 count;
+ u8 bw;
+ u8 adcmultiplier;
+
+ deb_info("Bandwidth %d Adc %d", bandwidth, adcFrequency);
+
+ if (bandwidth == BANDWIDTH_5_MHZ)
+ bw = 3;
+ else if (bandwidth == BANDWIDTH_6_MHZ)
+ bw = 0;
+ else if (bandwidth == BANDWIDTH_7_MHZ)
+ bw = 1;
+ else if (bandwidth == BANDWIDTH_8_MHZ)
+ bw = 2;
+ else
+ bw = 2;
+
+ ret = it913x_write_reg(state, PRO_DMOD, REG_BW, bw);
+
+ if (state->table == NULL)
+ return -EINVAL;
+
+ /* In write order */
+ coeff[0] = state->table[bw].coeff_1_2048;
+ coeff[1] = state->table[bw].coeff_2_2k;
+ coeff[2] = state->table[bw].coeff_1_8191;
+ coeff[3] = state->table[bw].coeff_1_8192;
+ coeff[4] = state->table[bw].coeff_1_8193;
+ coeff[5] = state->table[bw].coeff_2_8k;
+ coeff[6] = state->table[bw].coeff_1_4096;
+ coeff[7] = state->table[bw].coeff_2_4k;
+ bfsfcw_fftinx_ratio = state->table[bw].bfsfcw_fftinx_ratio;
+ fftinx_bfsfcw_ratio = state->table[bw].fftinx_bfsfcw_ratio;
+
+ /* ADC multiplier */
+ ret = it913x_read_reg_u8(state, ADC_X_2);
+ if (ret < 0)
+ return -EINVAL;
+
+ adcmultiplier = ret;
+
+ count = 0;
+
+ /* Build Buffer for COEFF Registers */
+ for (i = 0; i < 8; i++) {
+ if (adcmultiplier == 1)
+ coeff[i] /= 2;
+ buffer[count++] = (coeff[i] >> 24) & 0x3;
+ buffer[count++] = (coeff[i] >> 16) & 0xff;
+ buffer[count++] = (coeff[i] >> 8) & 0xff;
+ buffer[count++] = coeff[i] & 0xff;
+ }
+
+ /* bfsfcw_fftinx_ratio register 0x21-0x22 */
+ buffer[count++] = bfsfcw_fftinx_ratio & 0xff;
+ buffer[count++] = (bfsfcw_fftinx_ratio >> 8) & 0xff;
+ /* fftinx_bfsfcw_ratio register 0x23-0x24 */
+ buffer[count++] = fftinx_bfsfcw_ratio & 0xff;
+ buffer[count++] = (fftinx_bfsfcw_ratio >> 8) & 0xff;
+ /* start at COEFF_1_2048 and write through to fftinx_bfsfcw_ratio*/
+ ret = it913x_write(state, PRO_DMOD, COEFF_1_2048, buffer, count);
+
+ for (i = 0; i < 42; i += 8)
+ debug_data_snipet(0x1, "Buffer", &buffer[i]);
+
+ return ret;
+}
+
+
+
+static int it913x_fe_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ int ret, i;
+ fe_status_t old_status = state->it913x_status;
+ *status = 0;
+
+ if (state->it913x_status == 0) {
+ ret = it913x_read_reg_u8(state, EMPTY_CHANNEL_STATUS);
+ if (ret == 0x1) {
+ *status |= FE_HAS_SIGNAL;
+ for (i = 0; i < 40; i++) {
+ ret = it913x_read_reg_u8(state, MP2IF_SYNC_LK);
+ if (ret == 0x1)
+ break;
+ msleep(25);
+ }
+ if (ret == 0x1)
+ *status |= FE_HAS_CARRIER
+ | FE_HAS_VITERBI
+ | FE_HAS_SYNC;
+ state->it913x_status = *status;
+ }
+ }
+
+ if (state->it913x_status & FE_HAS_SYNC) {
+ ret = it913x_read_reg_u8(state, TPSD_LOCK);
+ if (ret == 0x1)
+ *status |= FE_HAS_LOCK
+ | state->it913x_status;
+ else
+ state->it913x_status = 0;
+ if (old_status != state->it913x_status)
+ ret = it913x_write_reg(state, PRO_LINK, GPIOH3_O, ret);
+ }
+
+ return 0;
+}
+
+static int it913x_fe_read_signal_strength(struct dvb_frontend *fe,
+ u16 *strength)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ int ret = it913x_read_reg_u8(state, SIGNAL_LEVEL);
+ /*SIGNAL_LEVEL always returns 100%! so using FE_HAS_SIGNAL as switch*/
+ if (state->it913x_status & FE_HAS_SIGNAL)
+ ret = (ret * 0xff) / 0x64;
+ else
+ ret = 0x0;
+ ret |= ret << 0x8;
+ *strength = ret;
+ return 0;
+}
+
+static int it913x_fe_read_snr(struct dvb_frontend *fe, u16* snr)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ int ret = it913x_read_reg_u8(state, SIGNAL_QUALITY);
+ ret = (ret * 0xff) / 0x64;
+ ret |= (ret << 0x8);
+ *snr = ~ret;
+ return 0;
+}
+
+static int it913x_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ *ber = 0;
+ return 0;
+}
+
+static int it913x_fe_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ *ucblocks = 0;
+ return 0;
+}
+
+static int it913x_fe_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ int ret;
+ u8 reg[8];
+
+ ret = it913x_read_reg(state, REG_TPSD_TX_MODE, reg, sizeof(reg));
+
+ if (reg[3] < 3)
+ p->u.ofdm.constellation = fe_con[reg[3]];
+
+ if (reg[0] < 3)
+ p->u.ofdm.transmission_mode = fe_mode[reg[0]];
+
+ if (reg[1] < 4)
+ p->u.ofdm.guard_interval = fe_gi[reg[1]];
+
+ if (reg[2] < 4)
+ p->u.ofdm.hierarchy_information = fe_hi[reg[2]];
+
+ p->u.ofdm.code_rate_HP = (reg[6] < 6) ? fe_code[reg[6]] : FEC_NONE;
+ p->u.ofdm.code_rate_LP = (reg[7] < 6) ? fe_code[reg[7]] : FEC_NONE;
+
+ return 0;
+}
+
+static int it913x_fe_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ int ret, i;
+ u8 empty_ch, last_ch;
+
+ state->it913x_status = 0;
+
+ /* Set bw*/
+ ret = it913x_fe_select_bw(state, p->u.ofdm.bandwidth,
+ state->adcFrequency);
+
+ /* Training Mode Off */
+ ret = it913x_write_reg(state, PRO_LINK, TRAINING_MODE, 0x0);
+
+ /* Clear Empty Channel */
+ ret = it913x_write_reg(state, PRO_DMOD, EMPTY_CHANNEL_STATUS, 0x0);
+
+ /* Clear bits */
+ ret = it913x_write_reg(state, PRO_DMOD, MP2IF_SYNC_LK, 0x0);
+ /* LED on */
+ ret = it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x1);
+ /* Select Band*/
+ if ((p->frequency >= 51000000) && (p->frequency <= 230000000))
+ i = 0;
+ else if ((p->frequency >= 350000000) && (p->frequency <= 900000000))
+ i = 1;
+ else if ((p->frequency >= 1450000000) && (p->frequency <= 1680000000))
+ i = 2;
+ else
+ return -EOPNOTSUPP;
+
+ ret = it913x_write_reg(state, PRO_DMOD, FREE_BAND, i);
+
+ deb_info("Frontend Set Tuner Type %02x", state->tuner_type);
+ switch (state->tuner_type) {
+ case IT9137: /* Tuner type 0x38 */
+ ret = it9137_set_tuner(state,
+ p->u.ofdm.bandwidth, p->frequency);
+ break;
+ default:
+ if (fe->ops.tuner_ops.set_params) {
+ fe->ops.tuner_ops.set_params(fe, p);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ break;
+ }
+ /* LED off */
+ ret = it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x0);
+ /* Trigger ofsm */
+ ret = it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x0);
+ last_ch = 2;
+ for (i = 0; i < 40; ++i) {
+ empty_ch = it913x_read_reg_u8(state, EMPTY_CHANNEL_STATUS);
+ if (last_ch == 1 && empty_ch == 1)
+ break;
+ if (last_ch == 2 && empty_ch == 2)
+ return 0;
+ last_ch = empty_ch;
+ msleep(25);
+ }
+ for (i = 0; i < 40; ++i) {
+ if (it913x_read_reg_u8(state, D_TPSD_LOCK) == 1)
+ break;
+ msleep(25);
+ }
+
+ state->frequency = p->frequency;
+ return 0;
+}
+
+static int it913x_fe_suspend(struct it913x_fe_state *state)
+{
+ int ret, i;
+ u8 b;
+
+ ret = it913x_write_reg(state, PRO_DMOD, SUSPEND_FLAG, 0x1);
+
+ ret |= it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x0);
+
+ for (i = 0; i < 128; i++) {
+ ret = it913x_read_reg(state, SUSPEND_FLAG, &b, 1);
+ if (ret < 0)
+ return -ENODEV;
+ if (b == 0)
+ break;
+
+ }
+
+ ret |= it913x_write_reg(state, PRO_DMOD, AFE_MEM0, 0x8);
+ /* Turn LED off */
+ ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x0);
+
+ ret |= it913x_fe_script_loader(state, it9137_tuner_off);
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+/* Power sequence */
+/* Power Up Tuner on -> Frontend suspend off -> Tuner clk on */
+/* Power Down Frontend suspend on -> Tuner clk off -> Tuner off */
+
+static int it913x_fe_sleep(struct dvb_frontend *fe)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ return it913x_fe_suspend(state);
+}
+
+static u32 compute_div(u32 a, u32 b, u32 x)
+{
+ u32 res = 0;
+ u32 c = 0;
+ u32 i = 0;
+
+ if (a > b) {
+ c = a / b;
+ a = a - c * b;
+ }
+
+ for (i = 0; i < x; i++) {
+ if (a >= b) {
+ res += 1;
+ a -= b;
+ }
+ a <<= 1;
+ res <<= 1;
+ }
+
+ res = (c << x) + res;
+
+ return res;
+}
+
+static int it913x_fe_start(struct it913x_fe_state *state)
+{
+ struct it913xset *set_fe;
+ struct it913xset *set_mode;
+ int ret;
+ u8 adf = (state->adf & 0xf);
+ u32 adc, xtal;
+ u8 b[4];
+
+ ret = it913x_init_tuner(state);
+
+ if (adf < 12) {
+ state->crystalFrequency = fe_clockTable[adf].xtal ;
+ state->table = fe_clockTable[adf].table;
+ state->adcFrequency = state->table->adcFrequency;
+
+ adc = compute_div(state->adcFrequency, 1000000ul, 19ul);
+ xtal = compute_div(state->crystalFrequency, 1000000ul, 19ul);
+
+ } else
+ return -EINVAL;
+
+ deb_info("Xtal Freq :%d Adc Freq :%d Adc %08x Xtal %08x",
+ state->crystalFrequency, state->adcFrequency, adc, xtal);
+
+ /* Set LED indicator on GPIOH3 */
+ ret = it913x_write_reg(state, PRO_LINK, GPIOH3_EN, 0x1);
+ ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_ON, 0x1);
+ ret |= it913x_write_reg(state, PRO_LINK, GPIOH3_O, 0x1);
+
+ ret |= it913x_write_reg(state, PRO_LINK, 0xf641, state->tuner_type);
+ ret |= it913x_write_reg(state, PRO_DMOD, 0xf5ca, 0x01);
+ ret |= it913x_write_reg(state, PRO_DMOD, 0xf715, 0x01);
+
+ b[0] = xtal & 0xff;
+ b[1] = (xtal >> 8) & 0xff;
+ b[2] = (xtal >> 16) & 0xff;
+ b[3] = (xtal >> 24);
+ ret |= it913x_write(state, PRO_DMOD, XTAL_CLK, b , 4);
+
+ b[0] = adc & 0xff;
+ b[1] = (adc >> 8) & 0xff;
+ b[2] = (adc >> 16) & 0xff;
+ ret |= it913x_write(state, PRO_DMOD, ADC_FREQ, b, 3);
+
+ switch (state->tuner_type) {
+ case IT9137: /* Tuner type 0x38 */
+ set_fe = it9137_set;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set the demod */
+ ret = it913x_fe_script_loader(state, set_fe);
+ /* Always solo frontend */
+ set_mode = set_solo_fe;
+ ret |= it913x_fe_script_loader(state, set_mode);
+
+ ret |= it913x_fe_suspend(state);
+ return 0;
+}
+
+static int it913x_fe_init(struct dvb_frontend *fe)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ int ret = 0;
+ /* Power Up Tuner - common all versions */
+ ret = it913x_write_reg(state, PRO_DMOD, 0xec40, 0x1);
+
+ ret |= it913x_write_reg(state, PRO_DMOD, AFE_MEM0, 0x0);
+
+ ret |= it913x_fe_script_loader(state, init_1);
+
+ switch (state->tuner_type) {
+ case IT9137:
+ ret |= it913x_write_reg(state, PRO_DMOD, 0xfba8, 0x0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static void it913x_fe_release(struct dvb_frontend *fe)
+{
+ struct it913x_fe_state *state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops it913x_fe_ofdm_ops;
+
+struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr, u8 adf, u8 type)
+{
+ struct it913x_fe_state *state = NULL;
+ int ret;
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct it913x_fe_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ state->i2c_adap = i2c_adap;
+ state->i2c_addr = i2c_addr;
+ state->adf = adf;
+ state->tuner_type = type;
+
+ ret = it913x_fe_start(state);
+ if (ret < 0)
+ goto error;
+
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &it913x_fe_ofdm_ops,
+ sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+
+ return &state->frontend;
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(it913x_fe_attach);
+
+static struct dvb_frontend_ops it913x_fe_ofdm_ops = {
+
+ .info = {
+ .name = "it913x-fe DVB-T",
+ .type = FE_OFDM,
+ .frequency_min = 51000000,
+ .frequency_max = 1680000000,
+ .frequency_stepsize = 62500,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO,
+ },
+
+ .release = it913x_fe_release,
+
+ .init = it913x_fe_init,
+ .sleep = it913x_fe_sleep,
+
+ .set_frontend = it913x_fe_set_frontend,
+ .get_frontend = it913x_fe_get_frontend,
+
+ .read_status = it913x_fe_read_status,
+ .read_signal_strength = it913x_fe_read_signal_strength,
+ .read_snr = it913x_fe_read_snr,
+ .read_ber = it913x_fe_read_ber,
+ .read_ucblocks = it913x_fe_read_ucblocks,
+};
+
+MODULE_DESCRIPTION("it913x Frontend and it9137 tuner");
+MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
+MODULE_VERSION("1.07");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb/frontends/it913x-fe.h
new file mode 100644
index 0000000..9d97f32
--- /dev/null
+++ b/drivers/media/dvb/frontends/it913x-fe.h
@@ -0,0 +1,196 @@
+/*
+ * Driver for it913x Frontend
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef IT913X_FE_H
+#define IT913X_FE_H
+
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+#if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \
+defined(MODULE))
+extern struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr, u8 adf, u8 type);
+#else
+static inline struct dvb_frontend *it913x_fe_attach(
+ struct i2c_adapter *i2c_adap, u8 i2c_addr, u8 adf, u8 type)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_IT913X_FE */
+#define I2C_BASE_ADDR 0x10
+#define DEV_0 0x0
+#define DEV_1 0x10
+#define PRO_LINK 0x0
+#define PRO_DMOD 0x1
+#define DEV_0_DMOD (PRO_DMOD << 0x7)
+#define DEV_1_DMOD (DEV_0_DMOD | DEV_1)
+#define CHIP2_I2C_ADDR 0x3a
+
+#define AFE_MEM0 0xfb24
+
+#define MP2_SW_RST 0xf99d
+#define MP2IF2_SW_RST 0xf9a4
+
+#define PADODPU 0xd827
+#define THIRDODPU 0xd828
+#define AGC_O_D 0xd829
+
+#define EP0_TX_EN 0xdd11
+#define EP0_TX_NAK 0xdd13
+#define EP4_TX_LEN_LSB 0xdd88
+#define EP4_TX_LEN_MSB 0xdd89
+#define EP4_MAX_PKT 0xdd0c
+#define EP5_TX_LEN_LSB 0xdd8a
+#define EP5_TX_LEN_MSB 0xdd8b
+#define EP5_MAX_PKT 0xdd0d
+
+#define IO_MUX_POWER_CLK 0xd800
+#define CLK_O_EN 0xd81a
+#define I2C_CLK 0xf103
+#define I2C_CLK_100 0x7
+#define I2C_CLK_400 0x1a
+
+#define D_TPSD_LOCK 0xf5a9
+#define MP2IF2_EN 0xf9a3
+#define MP2IF_SERIAL 0xf985
+#define TSIS_ENABLE 0xf9cd
+#define MP2IF2_HALF_PSB 0xf9a5
+#define MP2IF_STOP_EN 0xf9b5
+#define MPEG_FULL_SPEED 0xf990
+#define TOP_HOSTB_SER_MODE 0xd91c
+
+#define PID_RST 0xf992
+#define PID_EN 0xf993
+#define PID_INX_EN 0xf994
+#define PID_INX 0xf995
+#define PID_LSB 0xf996
+#define PID_MSB 0xf997
+
+#define MP2IF_MPEG_PAR_MODE 0xf986
+#define DCA_UPPER_CHIP 0xf731
+#define DCA_LOWER_CHIP 0xf732
+#define DCA_PLATCH 0xf730
+#define DCA_FPGA_LATCH 0xf778
+#define DCA_STAND_ALONE 0xf73c
+#define DCA_ENABLE 0xf776
+
+#define DVBT_INTEN 0xf41f
+#define DVBT_ENABLE 0xf41a
+#define HOSTB_DCA_LOWER 0xd91f
+#define HOSTB_MPEG_PAR_MODE 0xd91b
+#define HOSTB_MPEG_SER_MODE 0xd91c
+#define HOSTB_MPEG_SER_DO7 0xd91d
+#define HOSTB_DCA_UPPER 0xd91e
+#define PADMISCDR2 0xd830
+#define PADMISCDR4 0xd831
+#define PADMISCDR8 0xd832
+#define PADMISCDRSR 0xd833
+#define LOCK3_OUT 0xd8fd
+
+#define GPIOH1_O 0xd8af
+#define GPIOH1_EN 0xd8b0
+#define GPIOH1_ON 0xd8b1
+#define GPIOH3_O 0xd8b3
+#define GPIOH3_EN 0xd8b4
+#define GPIOH3_ON 0xd8b5
+#define GPIOH5_O 0xd8bb
+#define GPIOH5_EN 0xd8bc
+#define GPIOH5_ON 0xd8bd
+
+#define AFE_MEM0 0xfb24
+
+#define REG_TPSD_TX_MODE 0xf900
+#define REG_TPSD_GI 0xf901
+#define REG_TPSD_HIER 0xf902
+#define REG_TPSD_CONST 0xf903
+#define REG_BW 0xf904
+#define REG_PRIV 0xf905
+#define REG_TPSD_HP_CODE 0xf906
+#define REG_TPSD_LP_CODE 0xf907
+
+#define MP2IF_SYNC_LK 0xf999
+#define ADC_FREQ 0xf1cd
+
+#define TRIGGER_OFSM 0x0000
+/* COEFF Registers start at 0x0001 to 0x0020 */
+#define COEFF_1_2048 0x0001
+#define XTAL_CLK 0x0025
+#define BFS_FCW 0x0029
+#define TPSD_LOCK 0x003c
+#define TRAINING_MODE 0x0040
+#define ADC_X_2 0x0045
+#define TUNER_ID 0x0046
+#define EMPTY_CHANNEL_STATUS 0x0047
+#define SIGNAL_LEVEL 0x0048
+#define SIGNAL_QUALITY 0x0049
+#define EST_SIGNAL_LEVEL 0x004a
+#define FREE_BAND 0x004b
+#define SUSPEND_FLAG 0x004c
+/* Build in tuners */
+#define IT9137 0x38
+
+enum {
+ CMD_DEMOD_READ = 0,
+ CMD_DEMOD_WRITE,
+ CMD_TUNER_READ,
+ CMD_TUNER_WRITE,
+ CMD_REG_EEPROM_READ,
+ CMD_REG_EEPROM_WRITE,
+ CMD_DATA_READ,
+ CMD_VAR_READ = 8,
+ CMD_VAR_WRITE,
+ CMD_PLATFORM_GET,
+ CMD_PLATFORM_SET,
+ CMD_IP_CACHE,
+ CMD_IP_ADD,
+ CMD_IP_REMOVE,
+ CMD_PID_ADD,
+ CMD_PID_REMOVE,
+ CMD_SIPSI_GET,
+ CMD_SIPSI_MPE_RESET,
+ CMD_H_PID_ADD = 0x15,
+ CMD_H_PID_REMOVE,
+ CMD_ABORT,
+ CMD_IR_GET,
+ CMD_IR_SET,
+ CMD_FW_DOWNLOAD = 0x21,
+ CMD_QUERYINFO,
+ CMD_BOOT,
+ CMD_FW_DOWNLOAD_BEGIN,
+ CMD_FW_DOWNLOAD_END,
+ CMD_RUN_CODE,
+ CMD_SCATTER_READ = 0x28,
+ CMD_SCATTER_WRITE,
+ CMD_GENERIC_READ,
+ CMD_GENERIC_WRITE
+};
+
+enum {
+ READ_LONG,
+ WRITE_LONG,
+ READ_SHORT,
+ WRITE_SHORT,
+ READ_DATA,
+ WRITE_DATA,
+ WRITE_CMD,
+};
+
+#endif /* IT913X_FE_H */
diff --git a/drivers/media/dvb/frontends/lnbp22.c b/drivers/media/dvb/frontends/lnbp22.c
new file mode 100644
index 0000000..84ad039
--- /dev/null
+++ b/drivers/media/dvb/frontends/lnbp22.c
@@ -0,0 +1,148 @@
+/*
+ * lnbp22.h - driver for lnb supply and control ic lnbp22
+ *
+ * Copyright (C) 2006 Dominik Kuhlen
+ * Based on lnbp21 driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+#include "lnbp22.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+
+#define dprintk(lvl, arg...) if (debug >= (lvl)) printk(arg)
+
+struct lnbp22 {
+ u8 config[4];
+ struct i2c_adapter *i2c;
+};
+
+static int lnbp22_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct lnbp22 *lnbp22 = (struct lnbp22 *)fe->sec_priv;
+ struct i2c_msg msg = {
+ .addr = 0x08,
+ .flags = 0,
+ .buf = (char *)&lnbp22->config,
+ .len = sizeof(lnbp22->config),
+ };
+
+ dprintk(1, "%s: %d (18V=%d 13V=%d)\n", __func__, voltage,
+ SEC_VOLTAGE_18, SEC_VOLTAGE_13);
+
+ lnbp22->config[3] = 0x60; /* Power down */
+ switch (voltage) {
+ case SEC_VOLTAGE_OFF:
+ break;
+ case SEC_VOLTAGE_13:
+ lnbp22->config[3] |= LNBP22_EN;
+ break;
+ case SEC_VOLTAGE_18:
+ lnbp22->config[3] |= (LNBP22_EN | LNBP22_VSEL);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ dprintk(1, "%s: 0x%02x)\n", __func__, lnbp22->config[3]);
+ return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int lnbp22_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
+{
+ struct lnbp22 *lnbp22 = (struct lnbp22 *) fe->sec_priv;
+ struct i2c_msg msg = {
+ .addr = 0x08,
+ .flags = 0,
+ .buf = (char *)&lnbp22->config,
+ .len = sizeof(lnbp22->config),
+ };
+
+ dprintk(1, "%s: %d\n", __func__, (int)arg);
+ if (arg)
+ lnbp22->config[3] |= LNBP22_LLC;
+ else
+ lnbp22->config[3] &= ~LNBP22_LLC;
+
+ return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static void lnbp22_release(struct dvb_frontend *fe)
+{
+ dprintk(1, "%s\n", __func__);
+ /* LNBP power off */
+ lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF);
+
+ /* free data */
+ kfree(fe->sec_priv);
+ fe->sec_priv = NULL;
+}
+
+struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c)
+{
+ struct lnbp22 *lnbp22 = kmalloc(sizeof(struct lnbp22), GFP_KERNEL);
+ if (!lnbp22)
+ return NULL;
+
+ /* default configuration */
+ lnbp22->config[0] = 0x00; /* ? */
+ lnbp22->config[1] = 0x28; /* ? */
+ lnbp22->config[2] = 0x48; /* ? */
+ lnbp22->config[3] = 0x60; /* Power down */
+ lnbp22->i2c = i2c;
+ fe->sec_priv = lnbp22;
+
+ /* detect if it is present or not */
+ if (lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF)) {
+ dprintk(0, "%s LNBP22 not found\n", __func__);
+ kfree(lnbp22);
+ fe->sec_priv = NULL;
+ return NULL;
+ }
+
+ /* install release callback */
+ fe->ops.release_sec = lnbp22_release;
+
+ /* override frontend ops */
+ fe->ops.set_voltage = lnbp22_set_voltage;
+ fe->ops.enable_high_lnb_voltage = lnbp22_enable_high_lnb_voltage;
+
+ return fe;
+}
+EXPORT_SYMBOL(lnbp22_attach);
+
+MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp22");
+MODULE_AUTHOR("Dominik Kuhlen");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/lnbp22.h b/drivers/media/dvb/frontends/lnbp22.h
new file mode 100644
index 0000000..63e2dec
--- /dev/null
+++ b/drivers/media/dvb/frontends/lnbp22.h
@@ -0,0 +1,57 @@
+/*
+ * lnbp22.h - driver for lnb supply and control ic lnbp22
+ *
+ * Copyright (C) 2006 Dominik Kuhlen
+ * Based on lnbp21.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef _LNBP22_H
+#define _LNBP22_H
+
+/* Enable */
+#define LNBP22_EN 0x10
+/* Voltage selection */
+#define LNBP22_VSEL 0x02
+/* Plus 1 Volt Bit */
+#define LNBP22_LLC 0x01
+
+#include <linux/dvb/frontend.h>
+
+#if defined(CONFIG_DVB_LNBP22) || \
+ (defined(CONFIG_DVB_LNBP22_MODULE) && defined(MODULE))
+/*
+ * override_set and override_clear control which system register bits (above)
+ * to always set & clear
+ */
+extern struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_LNBP22 */
+
+#endif /* _LNBP22_H */
diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
index d70eee0..117a569 100644
--- a/drivers/media/dvb/frontends/stb0899_algo.c
+++ b/drivers/media/dvb/frontends/stb0899_algo.c
@@ -358,6 +358,9 @@
else
dataTime = 500;
+ /* clear previous failed END_LOOPVIT */
+ stb0899_read_reg(state, STB0899_VSTATUS);
+
stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force search loop */
while (1) {
/* WARNING! VIT LOCKED has to be tested before VIT_END_LOOOP */
diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
index 37a222d..8408ef8 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ b/drivers/media/dvb/frontends/stb0899_drv.c
@@ -706,7 +706,7 @@
stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
for (i = 0; i < cmd->msg_len; i++) {
/* wait for FIFO empty */
- if (stb0899_wait_diseqc_fifo_empty(state, 10) < 0)
+ if (stb0899_wait_diseqc_fifo_empty(state, 100) < 0)
return -ETIMEDOUT;
stb0899_write_reg(state, STB0899_DISFIFO, cmd->msg[i]);
@@ -1426,9 +1426,9 @@
if (iter_scale > config->ldpc_max_iter)
iter_scale = config->ldpc_max_iter;
- reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER);
+ reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER);
STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale);
- stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg);
+ stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg);
}
static enum dvbfe_search stb0899_search(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c
index 8e0cfad..0aa3962 100644
--- a/drivers/media/dvb/frontends/stv0288.c
+++ b/drivers/media/dvb/frontends/stv0288.c
@@ -127,6 +127,11 @@
if ((srate < 1000000) || (srate > 45000000))
return -EINVAL;
+ stv0288_writeregI(state, 0x22, 0);
+ stv0288_writeregI(state, 0x23, 0);
+ stv0288_writeregI(state, 0x2b, 0xff);
+ stv0288_writeregI(state, 0x2c, 0xf7);
+
temp = (unsigned int)srate / 1000;
temp = temp * 32768;
@@ -461,6 +466,7 @@
char tm;
unsigned char tda[3];
+ u8 reg, time_out = 0;
dprintk("%s : FE_SET_FRONTEND\n", __func__);
@@ -488,22 +494,29 @@
/* Carrier lock control register */
stv0288_writeregI(state, 0x15, 0xc5);
- tda[0] = 0x2b; /* CFRM */
tda[2] = 0x0; /* CFRL */
- for (tm = -6; tm < 7;) {
+ for (tm = -9; tm < 7;) {
/* Viterbi status */
- if (stv0288_readreg(state, 0x24) & 0x8)
- break;
-
- tda[2] += 40;
- if (tda[2] < 40)
+ reg = stv0288_readreg(state, 0x24);
+ if (reg & 0x8)
+ break;
+ if (reg & 0x80) {
+ time_out++;
+ if (time_out > 10)
+ break;
+ tda[2] += 40;
+ if (tda[2] < 40)
+ tm++;
+ } else {
tm++;
+ tda[2] = 0;
+ time_out = 0;
+ }
tda[1] = (unsigned char)tm;
stv0288_writeregI(state, 0x2b, tda[1]);
stv0288_writeregI(state, 0x2c, tda[2]);
udelay(30);
}
-
state->tuner_frequency = c->frequency;
state->fec_inner = FEC_AUTO;
state->symbol_rate = c->symbol_rate;
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 52d8712..ebda419 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -3463,9 +3463,15 @@
static int stv090x_read_status(struct dvb_frontend *fe, enum fe_status *status)
{
struct stv090x_state *state = fe->demodulator_priv;
- u32 reg;
+ u32 reg, dstatus;
u8 search_state;
+ *status = 0;
+
+ dstatus = STV090x_READ_DEMOD(state, DSTATUS);
+ if (STV090x_GETFIELD_Px(dstatus, CAR_LOCK_FIELD))
+ *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
+
reg = STV090x_READ_DEMOD(state, DMDSTATE);
search_state = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD);
@@ -3474,41 +3480,30 @@
case 1: /* first PLH detected */
default:
dprintk(FE_DEBUG, 1, "Status: Unlocked (Searching ..)");
- *status = 0;
break;
case 2: /* DVB-S2 mode */
dprintk(FE_DEBUG, 1, "Delivery system: DVB-S2");
- reg = STV090x_READ_DEMOD(state, DSTATUS);
- if (STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD)) {
+ if (STV090x_GETFIELD_Px(dstatus, LOCK_DEFINITIF_FIELD)) {
reg = STV090x_READ_DEMOD(state, PDELSTATUS1);
if (STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD)) {
+ *status |= FE_HAS_VITERBI;
reg = STV090x_READ_DEMOD(state, TSSTATUS);
- if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
- *status = FE_HAS_SIGNAL |
- FE_HAS_CARRIER |
- FE_HAS_VITERBI |
- FE_HAS_SYNC |
- FE_HAS_LOCK;
- }
+ if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD))
+ *status |= FE_HAS_SYNC | FE_HAS_LOCK;
}
}
break;
case 3: /* DVB-S1/legacy mode */
dprintk(FE_DEBUG, 1, "Delivery system: DVB-S");
- reg = STV090x_READ_DEMOD(state, DSTATUS);
- if (STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD)) {
+ if (STV090x_GETFIELD_Px(dstatus, LOCK_DEFINITIF_FIELD)) {
reg = STV090x_READ_DEMOD(state, VSTATUSVIT);
if (STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD)) {
+ *status |= FE_HAS_VITERBI;
reg = STV090x_READ_DEMOD(state, TSSTATUS);
- if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
- *status = FE_HAS_SIGNAL |
- FE_HAS_CARRIER |
- FE_HAS_VITERBI |
- FE_HAS_SYNC |
- FE_HAS_LOCK;
- }
+ if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD))
+ *status |= FE_HAS_SYNC | FE_HAS_LOCK;
}
}
break;
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 93f6a75..7f10594 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -206,15 +206,16 @@
static struct pll_tab {
u32 clk_freq_khz;
u32 if_freq_khz;
- u8 m, n, p;
} pll_tab[] = {
- { TDA10048_CLK_4000, TDA10048_IF_36130, 10, 0, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_3300, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_3500, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_3800, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_4300, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 },
+ { TDA10048_CLK_4000, TDA10048_IF_36130 },
+ { TDA10048_CLK_16000, TDA10048_IF_3300 },
+ { TDA10048_CLK_16000, TDA10048_IF_3500 },
+ { TDA10048_CLK_16000, TDA10048_IF_3800 },
+ { TDA10048_CLK_16000, TDA10048_IF_4000 },
+ { TDA10048_CLK_16000, TDA10048_IF_4300 },
+ { TDA10048_CLK_16000, TDA10048_IF_4500 },
+ { TDA10048_CLK_16000, TDA10048_IF_5000 },
+ { TDA10048_CLK_16000, TDA10048_IF_36130 },
};
static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
@@ -460,9 +461,6 @@
state->freq_if_hz = pll_tab[i].if_freq_khz * 1000;
state->xtal_hz = pll_tab[i].clk_freq_khz * 1000;
- state->pll_mfactor = pll_tab[i].m;
- state->pll_nfactor = pll_tab[i].n;
- state->pll_pfactor = pll_tab[i].p;
break;
}
}
@@ -781,6 +779,10 @@
dprintk(1, "%s()\n", __func__);
+ /* PLL */
+ init_tab[4].data = (u8)(state->pll_mfactor);
+ init_tab[5].data = (u8)(state->pll_nfactor) | 0x40;
+
/* Apply register defaults */
for (i = 0; i < ARRAY_SIZE(init_tab); i++)
tda10048_writereg(state, init_tab[i].reg, init_tab[i].data);
@@ -1123,7 +1125,7 @@
/* setup the state and clone the config */
memcpy(&state->config, config, sizeof(*config));
state->i2c = i2c;
- state->fwloaded = 0;
+ state->fwloaded = config->no_firmware;
state->bandwidth = BANDWIDTH_8_MHZ;
/* check if the demod is present */
@@ -1135,6 +1137,17 @@
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
+ /* set pll */
+ if (config->set_pll) {
+ state->pll_mfactor = config->pll_m;
+ state->pll_nfactor = config->pll_n;
+ state->pll_pfactor = config->pll_p;
+ } else {
+ state->pll_mfactor = 10;
+ state->pll_nfactor = 3;
+ state->pll_pfactor = 0;
+ }
+
/* Establish any defaults the the user didn't pass */
tda10048_establish_defaults(&state->frontend);
diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb/frontends/tda10048.h
index 8828cea..fb2ef5a 100644
--- a/drivers/media/dvb/frontends/tda10048.h
+++ b/drivers/media/dvb/frontends/tda10048.h
@@ -51,6 +51,7 @@
#define TDA10048_IF_4300 4300
#define TDA10048_IF_4500 4500
#define TDA10048_IF_4750 4750
+#define TDA10048_IF_5000 5000
#define TDA10048_IF_36130 36130
u16 dtv6_if_freq_khz;
u16 dtv7_if_freq_khz;
@@ -62,6 +63,13 @@
/* Disable I2C gate access */
u8 disable_gate_access;
+
+ bool no_firmware;
+
+ bool set_pll;
+ u8 pll_m;
+ u8 pll_p;
+ u8 pll_n;
};
#if defined(CONFIG_DVB_TDA10048) || \
diff --git a/drivers/media/dvb/frontends/tda10071.c b/drivers/media/dvb/frontends/tda10071.c
new file mode 100644
index 0000000..0c37434
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda10071.c
@@ -0,0 +1,1269 @@
+/*
+ * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
+ *
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "tda10071_priv.h"
+
+int tda10071_debug;
+module_param_named(debug, tda10071_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+static struct dvb_frontend_ops tda10071_ops;
+
+/* write multiple registers */
+static int tda10071_wr_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
+ int len)
+{
+ int ret;
+ u8 buf[len+1];
+ struct i2c_msg msg[1] = {
+ {
+ .addr = priv->cfg.i2c_address,
+ .flags = 0,
+ .len = sizeof(buf),
+ .buf = buf,
+ }
+ };
+
+ buf[0] = reg;
+ memcpy(&buf[1], val, len);
+
+ ret = i2c_transfer(priv->i2c, msg, 1);
+ if (ret == 1) {
+ ret = 0;
+ } else {
+ warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len);
+ ret = -EREMOTEIO;
+ }
+ return ret;
+}
+
+/* read multiple registers */
+static int tda10071_rd_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
+ int len)
+{
+ int ret;
+ u8 buf[len];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = priv->cfg.i2c_address,
+ .flags = 0,
+ .len = 1,
+ .buf = ®,
+ }, {
+ .addr = priv->cfg.i2c_address,
+ .flags = I2C_M_RD,
+ .len = sizeof(buf),
+ .buf = buf,
+ }
+ };
+
+ ret = i2c_transfer(priv->i2c, msg, 2);
+ if (ret == 2) {
+ memcpy(val, buf, len);
+ ret = 0;
+ } else {
+ warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len);
+ ret = -EREMOTEIO;
+ }
+ return ret;
+}
+
+/* write single register */
+static int tda10071_wr_reg(struct tda10071_priv *priv, u8 reg, u8 val)
+{
+ return tda10071_wr_regs(priv, reg, &val, 1);
+}
+
+/* read single register */
+static int tda10071_rd_reg(struct tda10071_priv *priv, u8 reg, u8 *val)
+{
+ return tda10071_rd_regs(priv, reg, val, 1);
+}
+
+/* write single register with mask */
+int tda10071_wr_reg_mask(struct tda10071_priv *priv, u8 reg, u8 val, u8 mask)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = tda10071_rd_regs(priv, reg, &tmp, 1);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return tda10071_wr_regs(priv, reg, &val, 1);
+}
+
+/* read single register with mask */
+int tda10071_rd_reg_mask(struct tda10071_priv *priv, u8 reg, u8 *val, u8 mask)
+{
+ int ret, i;
+ u8 tmp;
+
+ ret = tda10071_rd_regs(priv, reg, &tmp, 1);
+ if (ret)
+ return ret;
+
+ tmp &= mask;
+
+ /* find position of the first bit */
+ for (i = 0; i < 8; i++) {
+ if ((mask >> i) & 0x01)
+ break;
+ }
+ *val = tmp >> i;
+
+ return 0;
+}
+
+/* execute firmware command */
+static int tda10071_cmd_execute(struct tda10071_priv *priv,
+ struct tda10071_cmd *cmd)
+{
+ int ret, i;
+ u8 tmp;
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ /* write cmd and args for firmware */
+ ret = tda10071_wr_regs(priv, 0x00, cmd->args, cmd->len);
+ if (ret)
+ goto error;
+
+ /* start cmd execution */
+ ret = tda10071_wr_reg(priv, 0x1f, 1);
+ if (ret)
+ goto error;
+
+ /* wait cmd execution terminate */
+ for (i = 1000, tmp = 1; i && tmp; i--) {
+ ret = tda10071_rd_reg(priv, 0x1f, &tmp);
+ if (ret)
+ goto error;
+
+ usleep_range(200, 5000);
+ }
+
+ dbg("%s: loop=%d", __func__, i);
+
+ if (i == 0) {
+ ret = -ETIMEDOUT;
+ goto error;
+ }
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_set_tone(struct dvb_frontend *fe,
+ fe_sec_tone_mode_t fe_sec_tone_mode)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret;
+ u8 tone;
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ dbg("%s: tone_mode=%d", __func__, fe_sec_tone_mode);
+
+ switch (fe_sec_tone_mode) {
+ case SEC_TONE_ON:
+ tone = 1;
+ break;
+ case SEC_TONE_OFF:
+ tone = 0;
+ break;
+ default:
+ dbg("%s: invalid fe_sec_tone_mode", __func__);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ cmd.args[0x00] = CMD_LNB_PCB_CONFIG;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = 0x00;
+ cmd.args[0x03] = 0x00;
+ cmd.args[0x04] = tone;
+ cmd.len = 0x05;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t fe_sec_voltage)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret;
+ u8 voltage;
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ dbg("%s: voltage=%d", __func__, fe_sec_voltage);
+
+ switch (fe_sec_voltage) {
+ case SEC_VOLTAGE_13:
+ voltage = 0;
+ break;
+ case SEC_VOLTAGE_18:
+ voltage = 1;
+ break;
+ case SEC_VOLTAGE_OFF:
+ voltage = 0;
+ break;
+ default:
+ dbg("%s: invalid fe_sec_voltage", __func__);
+ ret = -EINVAL;
+ goto error;
+ };
+
+ cmd.args[0x00] = CMD_LNB_SET_DC_LEVEL;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = voltage;
+ cmd.len = 0x03;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_diseqc_send_master_cmd(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *diseqc_cmd)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret, i;
+ u8 tmp;
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ dbg("%s: msg_len=%d", __func__, diseqc_cmd->msg_len);
+
+ if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 16) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /* wait LNB TX */
+ for (i = 500, tmp = 0; i && !tmp; i--) {
+ ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01);
+ if (ret)
+ goto error;
+
+ usleep_range(10000, 20000);
+ }
+
+ dbg("%s: loop=%d", __func__, i);
+
+ if (i == 0) {
+ ret = -ETIMEDOUT;
+ goto error;
+ }
+
+ ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_LNB_SEND_DISEQC;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = 0;
+ cmd.args[0x03] = 0;
+ cmd.args[0x04] = 2;
+ cmd.args[0x05] = 0;
+ cmd.args[0x06] = diseqc_cmd->msg_len;
+ memcpy(&cmd.args[0x07], diseqc_cmd->msg, diseqc_cmd->msg_len);
+ cmd.len = 0x07 + diseqc_cmd->msg_len;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_diseqc_recv_slave_reply(struct dvb_frontend *fe,
+ struct dvb_diseqc_slave_reply *reply)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret, i;
+ u8 tmp;
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ dbg("%s:", __func__);
+
+ /* wait LNB RX */
+ for (i = 500, tmp = 0; i && !tmp; i--) {
+ ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x02);
+ if (ret)
+ goto error;
+
+ usleep_range(10000, 20000);
+ }
+
+ dbg("%s: loop=%d", __func__, i);
+
+ if (i == 0) {
+ ret = -ETIMEDOUT;
+ goto error;
+ }
+
+ /* reply len */
+ ret = tda10071_rd_reg(priv, 0x46, &tmp);
+ if (ret)
+ goto error;
+
+ reply->msg_len = tmp & 0x1f; /* [4:0] */;
+ if (reply->msg_len > sizeof(reply->msg))
+ reply->msg_len = sizeof(reply->msg); /* truncate API max */
+
+ /* read reply */
+ cmd.args[0x00] = CMD_LNB_UPDATE_REPLY;
+ cmd.args[0x01] = 0;
+ cmd.len = 0x02;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ ret = tda10071_rd_regs(priv, cmd.len, reply->msg, reply->msg_len);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_diseqc_send_burst(struct dvb_frontend *fe,
+ fe_sec_mini_cmd_t fe_sec_mini_cmd)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret, i;
+ u8 tmp, burst;
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ dbg("%s: fe_sec_mini_cmd=%d", __func__, fe_sec_mini_cmd);
+
+ switch (fe_sec_mini_cmd) {
+ case SEC_MINI_A:
+ burst = 0;
+ break;
+ case SEC_MINI_B:
+ burst = 1;
+ break;
+ default:
+ dbg("%s: invalid fe_sec_mini_cmd", __func__);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /* wait LNB TX */
+ for (i = 500, tmp = 0; i && !tmp; i--) {
+ ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01);
+ if (ret)
+ goto error;
+
+ usleep_range(10000, 20000);
+ }
+
+ dbg("%s: loop=%d", __func__, i);
+
+ if (i == 0) {
+ ret = -ETIMEDOUT;
+ goto error;
+ }
+
+ ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_LNB_SEND_TONEBURST;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = burst;
+ cmd.len = 0x03;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ int ret;
+ u8 tmp;
+
+ *status = 0;
+
+ if (!priv->warm) {
+ ret = 0;
+ goto error;
+ }
+
+ ret = tda10071_rd_reg(priv, 0x39, &tmp);
+ if (ret)
+ goto error;
+
+ if (tmp & 0x01) /* tuner PLL */
+ *status |= FE_HAS_SIGNAL;
+ if (tmp & 0x02) /* demod PLL */
+ *status |= FE_HAS_CARRIER;
+ if (tmp & 0x04) /* viterbi or LDPC*/
+ *status |= FE_HAS_VITERBI;
+ if (tmp & 0x08) /* RS or BCH */
+ *status |= FE_HAS_SYNC | FE_HAS_LOCK;
+
+ priv->fe_status = *status;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ int ret;
+ u8 buf[2];
+
+ if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
+ *snr = 0;
+ ret = 0;
+ goto error;
+ }
+
+ ret = tda10071_rd_regs(priv, 0x3a, buf, 2);
+ if (ret)
+ goto error;
+
+ /* Es/No dBx10 */
+ *snr = buf[0] << 8 | buf[1];
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret;
+ u8 tmp;
+
+ if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
+ *strength = 0;
+ ret = 0;
+ goto error;
+ }
+
+ cmd.args[0x00] = CMD_GET_AGCACC;
+ cmd.args[0x01] = 0;
+ cmd.len = 0x02;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ /* input power estimate dBm */
+ ret = tda10071_rd_reg(priv, 0x50, &tmp);
+ if (ret)
+ goto error;
+
+ if (tmp < 181)
+ tmp = 181; /* -75 dBm */
+ else if (tmp > 236)
+ tmp = 236; /* -20 dBm */
+
+ /* scale value to 0x0000-0xffff */
+ *strength = (tmp-181) * 0xffff / (236-181);
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret, i, len;
+ u8 tmp, reg, buf[8];
+
+ if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
+ *ber = priv->ber = 0;
+ ret = 0;
+ goto error;
+ }
+
+ switch (priv->delivery_system) {
+ case SYS_DVBS:
+ reg = 0x4c;
+ len = 8;
+ i = 1;
+ break;
+ case SYS_DVBS2:
+ reg = 0x4d;
+ len = 4;
+ i = 0;
+ break;
+ default:
+ *ber = priv->ber = 0;
+ return 0;
+ }
+
+ ret = tda10071_rd_reg(priv, reg, &tmp);
+ if (ret)
+ goto error;
+
+ if (priv->meas_count[i] == tmp) {
+ dbg("%s: meas not ready=%02x", __func__, tmp);
+ *ber = priv->ber;
+ return 0;
+ } else {
+ priv->meas_count[i] = tmp;
+ }
+
+ cmd.args[0x00] = CMD_BER_UPDATE_COUNTERS;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = i;
+ cmd.len = 0x03;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ ret = tda10071_rd_regs(priv, cmd.len, buf, len);
+ if (ret)
+ goto error;
+
+ if (priv->delivery_system == SYS_DVBS) {
+ *ber = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
+ priv->ucb += (buf[4] << 8) | buf[5];
+ } else {
+ *ber = (buf[0] << 8) | buf[1];
+ }
+ priv->ber = *ber;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ int ret = 0;
+
+ if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
+ *ucblocks = 0;
+ goto error;
+ }
+
+ /* UCB is updated when BER is read. Assume BER is read anyway. */
+
+ *ucblocks = priv->ucb;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int ret, i;
+ u8 mode, rolloff, pilot, inversion, div;
+
+ dbg("%s: delivery_system=%d modulation=%d frequency=%d " \
+ "symbol_rate=%d inversion=%d pilot=%d rolloff=%d", __func__,
+ c->delivery_system, c->modulation, c->frequency,
+ c->symbol_rate, c->inversion, c->pilot, c->rolloff);
+
+ priv->delivery_system = SYS_UNDEFINED;
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ switch (c->inversion) {
+ case INVERSION_OFF:
+ inversion = 1;
+ break;
+ case INVERSION_ON:
+ inversion = 0;
+ break;
+ case INVERSION_AUTO:
+ /* 2 = auto; try first on then off
+ * 3 = auto; try first off then on */
+ inversion = 3;
+ break;
+ default:
+ dbg("%s: invalid inversion", __func__);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ switch (c->delivery_system) {
+ case SYS_DVBS:
+ rolloff = 0;
+ pilot = 2;
+ break;
+ case SYS_DVBS2:
+ switch (c->rolloff) {
+ case ROLLOFF_20:
+ rolloff = 2;
+ break;
+ case ROLLOFF_25:
+ rolloff = 1;
+ break;
+ case ROLLOFF_35:
+ rolloff = 0;
+ break;
+ case ROLLOFF_AUTO:
+ default:
+ dbg("%s: invalid rolloff", __func__);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ switch (c->pilot) {
+ case PILOT_OFF:
+ pilot = 0;
+ break;
+ case PILOT_ON:
+ pilot = 1;
+ break;
+ case PILOT_AUTO:
+ pilot = 2;
+ break;
+ default:
+ dbg("%s: invalid pilot", __func__);
+ ret = -EINVAL;
+ goto error;
+ }
+ break;
+ default:
+ dbg("%s: invalid delivery_system", __func__);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ for (i = 0, mode = 0xff; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
+ if (c->delivery_system == TDA10071_MODCOD[i].delivery_system &&
+ c->modulation == TDA10071_MODCOD[i].modulation &&
+ c->fec_inner == TDA10071_MODCOD[i].fec) {
+ mode = TDA10071_MODCOD[i].val;
+ dbg("%s: mode found=%02x", __func__, mode);
+ break;
+ }
+ }
+
+ if (mode == 0xff) {
+ dbg("%s: invalid parameter combination", __func__);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ if (c->symbol_rate <= 5000000)
+ div = 14;
+ else
+ div = 4;
+
+ ret = tda10071_wr_reg(priv, 0x81, div);
+ if (ret)
+ goto error;
+
+ ret = tda10071_wr_reg(priv, 0xe3, div);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_CHANGE_CHANNEL;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = mode;
+ cmd.args[0x03] = (c->frequency >> 16) & 0xff;
+ cmd.args[0x04] = (c->frequency >> 8) & 0xff;
+ cmd.args[0x05] = (c->frequency >> 0) & 0xff;
+ cmd.args[0x06] = ((c->symbol_rate / 1000) >> 8) & 0xff;
+ cmd.args[0x07] = ((c->symbol_rate / 1000) >> 0) & 0xff;
+ cmd.args[0x08] = (tda10071_ops.info.frequency_tolerance >> 8) & 0xff;
+ cmd.args[0x09] = (tda10071_ops.info.frequency_tolerance >> 0) & 0xff;
+ cmd.args[0x0a] = rolloff;
+ cmd.args[0x0b] = inversion;
+ cmd.args[0x0c] = pilot;
+ cmd.args[0x0d] = 0x00;
+ cmd.args[0x0e] = 0x00;
+ cmd.len = 0x0f;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ priv->delivery_system = c->delivery_system;
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int ret, i;
+ u8 buf[5], tmp;
+
+ if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ ret = tda10071_rd_regs(priv, 0x30, buf, 5);
+ if (ret)
+ goto error;
+
+ tmp = buf[0] & 0x3f;
+ for (i = 0; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
+ if (tmp == TDA10071_MODCOD[i].val) {
+ c->modulation = TDA10071_MODCOD[i].modulation;
+ c->fec_inner = TDA10071_MODCOD[i].fec;
+ c->delivery_system = TDA10071_MODCOD[i].delivery_system;
+ }
+ }
+
+ switch ((buf[1] >> 0) & 0x01) {
+ case 0:
+ c->inversion = INVERSION_OFF;
+ break;
+ case 1:
+ c->inversion = INVERSION_ON;
+ break;
+ }
+
+ switch ((buf[1] >> 7) & 0x01) {
+ case 0:
+ c->pilot = PILOT_OFF;
+ break;
+ case 1:
+ c->pilot = PILOT_ON;
+ break;
+ }
+
+ c->frequency = (buf[2] << 16) | (buf[3] << 8) | (buf[4] << 0);
+
+ ret = tda10071_rd_regs(priv, 0x52, buf, 3);
+ if (ret)
+ goto error;
+
+ c->symbol_rate = (buf[0] << 16) | (buf[1] << 8) | (buf[2] << 0);
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_init(struct dvb_frontend *fe)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret, i, len, remaining, fw_size;
+ const struct firmware *fw;
+ u8 *fw_file = TDA10071_DEFAULT_FIRMWARE;
+ u8 tmp, buf[4];
+ struct tda10071_reg_val_mask tab[] = {
+ { 0xcd, 0x00, 0x07 },
+ { 0x80, 0x00, 0x02 },
+ { 0xcd, 0x00, 0xc0 },
+ { 0xce, 0x00, 0x1b },
+ { 0x9d, 0x00, 0x01 },
+ { 0x9d, 0x00, 0x02 },
+ { 0x9e, 0x00, 0x01 },
+ { 0x87, 0x00, 0x80 },
+ { 0xce, 0x00, 0x08 },
+ { 0xce, 0x00, 0x10 },
+ };
+ struct tda10071_reg_val_mask tab2[] = {
+ { 0xf1, 0x70, 0xff },
+ { 0x88, priv->cfg.pll_multiplier, 0x3f },
+ { 0x89, 0x00, 0x10 },
+ { 0x89, 0x10, 0x10 },
+ { 0xc0, 0x01, 0x01 },
+ { 0xc0, 0x00, 0x01 },
+ { 0xe0, 0xff, 0xff },
+ { 0xe0, 0x00, 0xff },
+ { 0x96, 0x1e, 0x7e },
+ { 0x8b, 0x08, 0x08 },
+ { 0x8b, 0x00, 0x08 },
+ { 0x8f, 0x1a, 0x7e },
+ { 0x8c, 0x68, 0xff },
+ { 0x8d, 0x08, 0xff },
+ { 0x8e, 0x4c, 0xff },
+ { 0x8f, 0x01, 0x01 },
+ { 0x8b, 0x04, 0x04 },
+ { 0x8b, 0x00, 0x04 },
+ { 0x87, 0x05, 0x07 },
+ { 0x80, 0x00, 0x20 },
+ { 0xc8, 0x01, 0xff },
+ { 0xb4, 0x47, 0xff },
+ { 0xb5, 0x9c, 0xff },
+ { 0xb6, 0x7d, 0xff },
+ { 0xba, 0x00, 0x03 },
+ { 0xb7, 0x47, 0xff },
+ { 0xb8, 0x9c, 0xff },
+ { 0xb9, 0x7d, 0xff },
+ { 0xba, 0x00, 0x0c },
+ { 0xc8, 0x00, 0xff },
+ { 0xcd, 0x00, 0x04 },
+ { 0xcd, 0x00, 0x20 },
+ { 0xe8, 0x02, 0xff },
+ { 0xcf, 0x20, 0xff },
+ { 0x9b, 0xd7, 0xff },
+ { 0x9a, 0x01, 0x03 },
+ { 0xa8, 0x05, 0x0f },
+ { 0xa8, 0x65, 0xf0 },
+ { 0xa6, 0xa0, 0xf0 },
+ { 0x9d, 0x50, 0xfc },
+ { 0x9e, 0x20, 0xe0 },
+ { 0xa3, 0x1c, 0x7c },
+ { 0xd5, 0x03, 0x03 },
+ };
+
+ /* firmware status */
+ ret = tda10071_rd_reg(priv, 0x51, &tmp);
+ if (ret)
+ goto error;
+
+ if (!tmp) {
+ /* warm state - wake up device from sleep */
+ priv->warm = 1;
+
+ for (i = 0; i < ARRAY_SIZE(tab); i++) {
+ ret = tda10071_wr_reg_mask(priv, tab[i].reg,
+ tab[i].val, tab[i].mask);
+ if (ret)
+ goto error;
+ }
+
+ cmd.args[0x00] = CMD_SET_SLEEP_MODE;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = 0;
+ cmd.len = 0x03;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+ } else {
+ /* cold state - try to download firmware */
+ priv->warm = 0;
+
+ /* request the firmware, this will block and timeout */
+ ret = request_firmware(&fw, fw_file, priv->i2c->dev.parent);
+ if (ret) {
+ err("did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more" \
+ " details on firmware-problems. (%d)",
+ fw_file, ret);
+ goto error;
+ }
+
+ /* init */
+ for (i = 0; i < ARRAY_SIZE(tab2); i++) {
+ ret = tda10071_wr_reg_mask(priv, tab2[i].reg,
+ tab2[i].val, tab2[i].mask);
+ if (ret)
+ goto error_release_firmware;
+ }
+
+ /* download firmware */
+ ret = tda10071_wr_reg(priv, 0xe0, 0x7f);
+ if (ret)
+ goto error_release_firmware;
+
+ ret = tda10071_wr_reg(priv, 0xf7, 0x81);
+ if (ret)
+ goto error_release_firmware;
+
+ ret = tda10071_wr_reg(priv, 0xf8, 0x00);
+ if (ret)
+ goto error_release_firmware;
+
+ ret = tda10071_wr_reg(priv, 0xf9, 0x00);
+ if (ret)
+ goto error_release_firmware;
+
+ info("found a '%s' in cold state, will try to load a firmware",
+ tda10071_ops.info.name);
+
+ info("downloading firmware from file '%s'", fw_file);
+
+ /* do not download last byte */
+ fw_size = fw->size - 1;
+
+ for (remaining = fw_size; remaining > 0;
+ remaining -= (priv->cfg.i2c_wr_max - 1)) {
+ len = remaining;
+ if (len > (priv->cfg.i2c_wr_max - 1))
+ len = (priv->cfg.i2c_wr_max - 1);
+
+ ret = tda10071_wr_regs(priv, 0xfa,
+ (u8 *) &fw->data[fw_size - remaining], len);
+ if (ret) {
+ err("firmware download failed=%d", ret);
+ if (ret)
+ goto error_release_firmware;
+ }
+ }
+ release_firmware(fw);
+
+ ret = tda10071_wr_reg(priv, 0xf7, 0x0c);
+ if (ret)
+ goto error;
+
+ ret = tda10071_wr_reg(priv, 0xe0, 0x00);
+ if (ret)
+ goto error;
+
+ /* wait firmware start */
+ msleep(250);
+
+ /* firmware status */
+ ret = tda10071_rd_reg(priv, 0x51, &tmp);
+ if (ret)
+ goto error;
+
+ if (tmp) {
+ info("firmware did not run");
+ ret = -EFAULT;
+ goto error;
+ } else {
+ priv->warm = 1;
+ }
+
+ cmd.args[0x00] = CMD_GET_FW_VERSION;
+ cmd.len = 0x01;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ ret = tda10071_rd_regs(priv, cmd.len, buf, 4);
+ if (ret)
+ goto error;
+
+ info("firmware version %d.%d.%d.%d",
+ buf[0], buf[1], buf[2], buf[3]);
+ info("found a '%s' in warm state.", tda10071_ops.info.name);
+
+ ret = tda10071_rd_regs(priv, 0x81, buf, 2);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_DEMOD_INIT;
+ cmd.args[0x01] = ((priv->cfg.xtal / 1000) >> 8) & 0xff;
+ cmd.args[0x02] = ((priv->cfg.xtal / 1000) >> 0) & 0xff;
+ cmd.args[0x03] = buf[0];
+ cmd.args[0x04] = buf[1];
+ cmd.args[0x05] = priv->cfg.pll_multiplier;
+ cmd.args[0x06] = priv->cfg.spec_inv;
+ cmd.args[0x07] = 0x00;
+ cmd.len = 0x08;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_TUNER_INIT;
+ cmd.args[0x01] = 0x00;
+ cmd.args[0x02] = 0x00;
+ cmd.args[0x03] = 0x00;
+ cmd.args[0x04] = 0x00;
+ cmd.args[0x05] = 0x14;
+ cmd.args[0x06] = 0x00;
+ cmd.args[0x07] = 0x03;
+ cmd.args[0x08] = 0x02;
+ cmd.args[0x09] = 0x02;
+ cmd.args[0x0a] = 0x00;
+ cmd.args[0x0b] = 0x00;
+ cmd.args[0x0c] = 0x00;
+ cmd.args[0x0d] = 0x00;
+ cmd.args[0x0e] = 0x00;
+ cmd.len = 0x0f;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_MPEG_CONFIG;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = priv->cfg.ts_mode;
+ cmd.args[0x03] = 0x00;
+ cmd.args[0x04] = 0x04;
+ cmd.args[0x05] = 0x00;
+ cmd.len = 0x06;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ ret = tda10071_wr_reg_mask(priv, 0xf0, 0x01, 0x01);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_LNB_CONFIG;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = 150;
+ cmd.args[0x03] = 3;
+ cmd.args[0x04] = 22;
+ cmd.args[0x05] = 1;
+ cmd.args[0x06] = 1;
+ cmd.args[0x07] = 30;
+ cmd.args[0x08] = 30;
+ cmd.args[0x09] = 30;
+ cmd.args[0x0a] = 30;
+ cmd.len = 0x0b;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ cmd.args[0x00] = CMD_BER_CONTROL;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = 14;
+ cmd.args[0x03] = 14;
+ cmd.len = 0x04;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+ }
+
+ return ret;
+error_release_firmware:
+ release_firmware(fw);
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_sleep(struct dvb_frontend *fe)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ struct tda10071_cmd cmd;
+ int ret, i;
+ struct tda10071_reg_val_mask tab[] = {
+ { 0xcd, 0x07, 0x07 },
+ { 0x80, 0x02, 0x02 },
+ { 0xcd, 0xc0, 0xc0 },
+ { 0xce, 0x1b, 0x1b },
+ { 0x9d, 0x01, 0x01 },
+ { 0x9d, 0x02, 0x02 },
+ { 0x9e, 0x01, 0x01 },
+ { 0x87, 0x80, 0x80 },
+ { 0xce, 0x08, 0x08 },
+ { 0xce, 0x10, 0x10 },
+ };
+
+ if (!priv->warm) {
+ ret = -EFAULT;
+ goto error;
+ }
+
+ cmd.args[0x00] = CMD_SET_SLEEP_MODE;
+ cmd.args[0x01] = 0;
+ cmd.args[0x02] = 1;
+ cmd.len = 0x03;
+ ret = tda10071_cmd_execute(priv, &cmd);
+ if (ret)
+ goto error;
+
+ for (i = 0; i < ARRAY_SIZE(tab); i++) {
+ ret = tda10071_wr_reg_mask(priv, tab[i].reg, tab[i].val,
+ tab[i].mask);
+ if (ret)
+ goto error;
+ }
+
+ return ret;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int tda10071_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *s)
+{
+ s->min_delay_ms = 8000;
+ s->step_size = 0;
+ s->max_drift = 0;
+
+ return 0;
+}
+
+static void tda10071_release(struct dvb_frontend *fe)
+{
+ struct tda10071_priv *priv = fe->demodulator_priv;
+ kfree(priv);
+}
+
+struct dvb_frontend *tda10071_attach(const struct tda10071_config *config,
+ struct i2c_adapter *i2c)
+{
+ int ret;
+ struct tda10071_priv *priv = NULL;
+ u8 tmp;
+
+ /* allocate memory for the internal priv */
+ priv = kzalloc(sizeof(struct tda10071_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* setup the priv */
+ priv->i2c = i2c;
+ memcpy(&priv->cfg, config, sizeof(struct tda10071_config));
+
+ /* chip ID */
+ ret = tda10071_rd_reg(priv, 0xff, &tmp);
+ if (ret || tmp != 0x0f)
+ goto error;
+
+ /* chip type */
+ ret = tda10071_rd_reg(priv, 0xdd, &tmp);
+ if (ret || tmp != 0x00)
+ goto error;
+
+ /* chip version */
+ ret = tda10071_rd_reg(priv, 0xfe, &tmp);
+ if (ret || tmp != 0x01)
+ goto error;
+
+ /* create dvb_frontend */
+ memcpy(&priv->fe.ops, &tda10071_ops, sizeof(struct dvb_frontend_ops));
+ priv->fe.demodulator_priv = priv;
+
+ return &priv->fe;
+error:
+ dbg("%s: failed=%d", __func__, ret);
+ kfree(priv);
+ return NULL;
+}
+EXPORT_SYMBOL(tda10071_attach);
+
+static struct dvb_frontend_ops tda10071_ops = {
+ .info = {
+ .name = "NXP TDA10071",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_tolerance = 5000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_8_9 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK |
+ FE_CAN_RECOVER |
+ FE_CAN_2G_MODULATION
+ },
+
+ .release = tda10071_release,
+
+ .get_tune_settings = tda10071_get_tune_settings,
+
+ .init = tda10071_init,
+ .sleep = tda10071_sleep,
+
+ .set_frontend = tda10071_set_frontend,
+ .get_frontend = tda10071_get_frontend,
+
+ .read_status = tda10071_read_status,
+ .read_snr = tda10071_read_snr,
+ .read_signal_strength = tda10071_read_signal_strength,
+ .read_ber = tda10071_read_ber,
+ .read_ucblocks = tda10071_read_ucblocks,
+
+ .diseqc_send_master_cmd = tda10071_diseqc_send_master_cmd,
+ .diseqc_recv_slave_reply = tda10071_diseqc_recv_slave_reply,
+ .diseqc_send_burst = tda10071_diseqc_send_burst,
+
+ .set_tone = tda10071_set_tone,
+ .set_voltage = tda10071_set_voltage,
+};
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("NXP TDA10071 DVB-S/S2 demodulator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda10071.h b/drivers/media/dvb/frontends/tda10071.h
new file mode 100644
index 0000000..21163c4
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda10071.h
@@ -0,0 +1,81 @@
+/*
+ * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
+ *
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef TDA10071_H
+#define TDA10071_H
+
+#include <linux/dvb/frontend.h>
+
+struct tda10071_config {
+ /* Demodulator I2C address.
+ * Default: none, must set
+ * Values: 0x55,
+ */
+ u8 i2c_address;
+
+ /* Max bytes I2C provider can write at once.
+ * Note: Buffer is taken from the stack currently!
+ * Default: none, must set
+ * Values:
+ */
+ u16 i2c_wr_max;
+
+ /* TS output mode.
+ * Default: TDA10071_TS_SERIAL
+ * Values:
+ */
+#define TDA10071_TS_SERIAL 0
+#define TDA10071_TS_PARALLEL 1
+ u8 ts_mode;
+
+ /* Input spectrum inversion.
+ * Default: 0
+ * Values: 0, 1
+ */
+ bool spec_inv;
+
+ /* Xtal frequency Hz
+ * Default: none, must set
+ * Values:
+ */
+ u32 xtal;
+
+ /* PLL multiplier.
+ * Default: none, must set
+ * Values:
+ */
+ u8 pll_multiplier;
+};
+
+
+#if defined(CONFIG_DVB_TDA10071) || \
+ (defined(CONFIG_DVB_TDA10071_MODULE) && defined(MODULE))
+extern struct dvb_frontend *tda10071_attach(
+ const struct tda10071_config *config, struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *tda10071_attach(
+ const struct tda10071_config *config, struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif /* TDA10071_H */
diff --git a/drivers/media/dvb/frontends/tda10071_priv.h b/drivers/media/dvb/frontends/tda10071_priv.h
new file mode 100644
index 0000000..93c5e63
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda10071_priv.h
@@ -0,0 +1,122 @@
+/*
+ * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
+ *
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef TDA10071_PRIV
+#define TDA10071_PRIV
+
+#include "dvb_frontend.h"
+#include "tda10071.h"
+#include <linux/firmware.h>
+
+#define LOG_PREFIX "tda10071"
+
+#undef dbg
+#define dbg(f, arg...) \
+ if (tda10071_debug) \
+ printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef err
+#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
+#undef info
+#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef warn
+#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
+
+struct tda10071_priv {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend fe;
+ struct tda10071_config cfg;
+
+ u8 meas_count[2];
+ u32 ber;
+ u32 ucb;
+ fe_status_t fe_status;
+ fe_delivery_system_t delivery_system;
+ bool warm; /* FW running */
+};
+
+static struct tda10071_modcod {
+ fe_delivery_system_t delivery_system;
+ fe_modulation_t modulation;
+ fe_code_rate_t fec;
+ u8 val;
+} TDA10071_MODCOD[] = {
+ /* NBC-QPSK */
+ { SYS_DVBS2, QPSK, FEC_AUTO, 0x00 },
+ { SYS_DVBS2, QPSK, FEC_1_2, 0x04 },
+ { SYS_DVBS2, QPSK, FEC_3_5, 0x05 },
+ { SYS_DVBS2, QPSK, FEC_2_3, 0x06 },
+ { SYS_DVBS2, QPSK, FEC_3_4, 0x07 },
+ { SYS_DVBS2, QPSK, FEC_4_5, 0x08 },
+ { SYS_DVBS2, QPSK, FEC_5_6, 0x09 },
+ { SYS_DVBS2, QPSK, FEC_8_9, 0x0a },
+ { SYS_DVBS2, QPSK, FEC_9_10, 0x0b },
+ /* 8PSK */
+ { SYS_DVBS2, PSK_8, FEC_3_5, 0x0c },
+ { SYS_DVBS2, PSK_8, FEC_2_3, 0x0d },
+ { SYS_DVBS2, PSK_8, FEC_3_4, 0x0e },
+ { SYS_DVBS2, PSK_8, FEC_5_6, 0x0f },
+ { SYS_DVBS2, PSK_8, FEC_8_9, 0x10 },
+ { SYS_DVBS2, PSK_8, FEC_9_10, 0x11 },
+ /* QPSK */
+ { SYS_DVBS, QPSK, FEC_AUTO, 0x2d },
+ { SYS_DVBS, QPSK, FEC_1_2, 0x2e },
+ { SYS_DVBS, QPSK, FEC_2_3, 0x2f },
+ { SYS_DVBS, QPSK, FEC_3_4, 0x30 },
+ { SYS_DVBS, QPSK, FEC_5_6, 0x31 },
+ { SYS_DVBS, QPSK, FEC_7_8, 0x32 },
+};
+
+struct tda10071_reg_val_mask {
+ u8 reg;
+ u8 val;
+ u8 mask;
+};
+
+/* firmware filename */
+#define TDA10071_DEFAULT_FIRMWARE "dvb-fe-tda10071.fw"
+
+/* firmware commands */
+#define CMD_DEMOD_INIT 0x10
+#define CMD_CHANGE_CHANNEL 0x11
+#define CMD_MPEG_CONFIG 0x13
+#define CMD_TUNER_INIT 0x15
+#define CMD_GET_AGCACC 0x1a
+
+#define CMD_LNB_CONFIG 0x20
+#define CMD_LNB_SEND_DISEQC 0x21
+#define CMD_LNB_SET_DC_LEVEL 0x22
+#define CMD_LNB_PCB_CONFIG 0x23
+#define CMD_LNB_SEND_TONEBURST 0x24
+#define CMD_LNB_UPDATE_REPLY 0x25
+
+#define CMD_GET_FW_VERSION 0x35
+#define CMD_SET_SLEEP_MODE 0x36
+#define CMD_BER_CONTROL 0x3e
+#define CMD_BER_UPDATE_COUNTERS 0x3f
+
+/* firmare command struct */
+#define TDA10071_ARGLEN 0x1e
+struct tda10071_cmd {
+ u8 args[TDA10071_ARGLEN];
+ u8 len;
+};
+
+
+#endif /* TDA10071_PRIV */
diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb/frontends/tda18271c2dd.c
index 0384e8d..1b1bf20 100644
--- a/drivers/media/dvb/frontends/tda18271c2dd.c
+++ b/drivers/media/dvb/frontends/tda18271c2dd.c
@@ -1195,7 +1195,7 @@
}
#endif
-static int get_frequency(struct dvb_frontend *fe, u32 *frequency)
+static int get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct tda_state *state = fe->tuner_priv;
@@ -1222,7 +1222,7 @@
.sleep = sleep,
.set_params = set_params,
.release = release,
- .get_frequency = get_frequency,
+ .get_if_frequency = get_if_frequency,
.get_bandwidth = get_bandwidth,
};
diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile
index 98dc5cd..ec8116d 100644
--- a/drivers/media/dvb/mantis/Makefile
+++ b/drivers/media/dvb/mantis/Makefile
@@ -25,4 +25,4 @@
obj-$(CONFIG_DVB_MANTIS) += mantis.o
obj-$(CONFIG_DVB_HOPPER) += hopper.o
-EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
+ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
index 1402062..71622f6 100644
--- a/drivers/media/dvb/mantis/hopper_cards.c
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -65,7 +65,7 @@
static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
{
- u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 stat = 0, mask = 0, lstat = 0;
u32 rst_stat = 0, rst_mask = 0;
struct mantis_pci *mantis;
@@ -80,7 +80,7 @@
stat = mmread(MANTIS_INT_STAT);
mask = mmread(MANTIS_INT_MASK);
- mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ lstat = stat & ~MANTIS_INT_RISCSTAT;
if (!(stat & mask))
return IRQ_NONE;
@@ -126,7 +126,7 @@
}
if (stat & MANTIS_INT_RISCI) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
- mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
tasklet_schedule(&mantis->tasklet);
}
if (stat & MANTIS_INT_I2CDONE) {
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
index 05cbb9d..c2bb90b 100644
--- a/drivers/media/dvb/mantis/mantis_cards.c
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -73,7 +73,7 @@
static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
{
- u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 stat = 0, mask = 0, lstat = 0;
u32 rst_stat = 0, rst_mask = 0;
struct mantis_pci *mantis;
@@ -88,7 +88,7 @@
stat = mmread(MANTIS_INT_STAT);
mask = mmread(MANTIS_INT_MASK);
- mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ lstat = stat & ~MANTIS_INT_RISCSTAT;
if (!(stat & mask))
return IRQ_NONE;
@@ -134,7 +134,7 @@
}
if (stat & MANTIS_INT_RISCI) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
- mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
tasklet_schedule(&mantis->tasklet);
}
if (stat & MANTIS_INT_I2CDONE) {
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
index 49dbca1..f2410cf 100644
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -123,11 +123,8 @@
unsigned int num;
/* RISC Core */
- u32 finished_block;
+ u32 busy_block;
u32 last_block;
- u32 line_bytes;
- u32 line_count;
- u32 risc_pos;
u8 *buf_cpu;
dma_addr_t buf_dma;
u32 *risc_cpu;
diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c
index 46202a4..c61ca7d 100644
--- a/drivers/media/dvb/mantis/mantis_dma.c
+++ b/drivers/media/dvb/mantis/mantis_dma.c
@@ -43,13 +43,17 @@
#define RISC_IRQ (0x01 << 24)
#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
-#define RISC_FLUSH() (mantis->risc_pos = 0)
-#define RISC_INSTR(opcode) (mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode))
+#define RISC_FLUSH(risc_pos) (risc_pos = 0)
+#define RISC_INSTR(risc_pos, opcode) (mantis->risc_cpu[risc_pos++] = cpu_to_le32(opcode))
#define MANTIS_BUF_SIZE (64 * 1024)
-#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4)
-#define MANTIS_BLOCK_COUNT (1 << 4)
-#define MANTIS_RISC_SIZE PAGE_SIZE
+#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE / 4)
+#define MANTIS_DMA_TR_BYTES (2 * 1024) /* upper limit: 4095 bytes. */
+#define MANTIS_BLOCK_COUNT (MANTIS_BUF_SIZE / MANTIS_BLOCK_BYTES)
+
+#define MANTIS_DMA_TR_UNITS (MANTIS_BLOCK_BYTES / MANTIS_DMA_TR_BYTES)
+/* MANTIS_BUF_SIZE / MANTIS_DMA_TR_UNITS must not exceed MANTIS_RISC_SIZE (4k RISC cmd buffer) */
+#define MANTIS_RISC_SIZE PAGE_SIZE /* RISC program must fit here. */
int mantis_dma_exit(struct mantis_pci *mantis)
{
@@ -124,27 +128,6 @@
return -ENOMEM;
}
-static inline int mantis_calc_lines(struct mantis_pci *mantis)
-{
- mantis->line_bytes = MANTIS_BLOCK_BYTES;
- mantis->line_count = MANTIS_BLOCK_COUNT;
-
- while (mantis->line_bytes > 4095) {
- mantis->line_bytes >>= 1;
- mantis->line_count <<= 1;
- }
-
- dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
- MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count);
-
- if (mantis->line_count > 255) {
- dprintk(MANTIS_ERROR, 1, "Buffer size error");
- return -EINVAL;
- }
-
- return 0;
-}
-
int mantis_dma_init(struct mantis_pci *mantis)
{
int err = 0;
@@ -158,12 +141,6 @@
goto err;
}
- err = mantis_calc_lines(mantis);
- if (err < 0) {
- dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed");
-
- goto err;
- }
return 0;
err:
@@ -174,31 +151,32 @@
static inline void mantis_risc_program(struct mantis_pci *mantis)
{
u32 buf_pos = 0;
- u32 line;
+ u32 line, step;
+ u32 risc_pos;
dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
- RISC_FLUSH();
+ RISC_FLUSH(risc_pos);
- dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
- mantis->line_count, mantis->line_bytes);
+ dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u, bytes per DMA tr %u",
+ MANTIS_BLOCK_COUNT, MANTIS_BLOCK_BYTES, MANTIS_DMA_TR_BYTES);
- for (line = 0; line < mantis->line_count; line++) {
- dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
- if (!(buf_pos % MANTIS_BLOCK_BYTES)) {
- RISC_INSTR(RISC_WRITE |
- RISC_IRQ |
- RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) +
- (MANTIS_BLOCK_COUNT - 1)) %
- MANTIS_BLOCK_COUNT) |
- mantis->line_bytes);
- } else {
- RISC_INSTR(RISC_WRITE | mantis->line_bytes);
- }
- RISC_INSTR(mantis->buf_dma + buf_pos);
- buf_pos += mantis->line_bytes;
+ for (line = 0; line < MANTIS_BLOCK_COUNT; line++) {
+ for (step = 0; step < MANTIS_DMA_TR_UNITS; step++) {
+ dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d], step=[%d]", line, step);
+ if (step == 0) {
+ RISC_INSTR(risc_pos, RISC_WRITE |
+ RISC_IRQ |
+ RISC_STATUS(line) |
+ MANTIS_DMA_TR_BYTES);
+ } else {
+ RISC_INSTR(risc_pos, RISC_WRITE | MANTIS_DMA_TR_BYTES);
+ }
+ RISC_INSTR(risc_pos, mantis->buf_dma + buf_pos);
+ buf_pos += MANTIS_DMA_TR_BYTES;
+ }
}
- RISC_INSTR(RISC_JUMP);
- RISC_INSTR(mantis->risc_dma);
+ RISC_INSTR(risc_pos, RISC_JUMP);
+ RISC_INSTR(risc_pos, mantis->risc_dma);
}
void mantis_dma_start(struct mantis_pci *mantis)
@@ -210,7 +188,7 @@
mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
mmwrite(0, MANTIS_DMA_CTL);
- mantis->last_block = mantis->finished_block = 0;
+ mantis->last_block = mantis->busy_block = 0;
mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
@@ -245,9 +223,9 @@
struct mantis_pci *mantis = (struct mantis_pci *) data;
struct mantis_hwconfig *config = mantis->hwconfig;
- while (mantis->last_block != mantis->finished_block) {
+ while (mantis->last_block != mantis->busy_block) {
dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
- mantis->last_block, mantis->finished_block);
+ mantis->last_block, mantis->busy_block);
(config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
(&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES);
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
index 38a436c..07aa887a 100644
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -51,7 +51,6 @@
{ STB0899_DISRX_ST0 , 0x04 },
{ STB0899_DISRX_ST1 , 0x00 },
{ STB0899_DISPARITY , 0x00 },
- { STB0899_DISFIFO , 0x00 },
{ STB0899_DISSTATUS , 0x20 },
{ STB0899_DISF22 , 0x99 },
{ STB0899_DISF22RX , 0xa8 },
diff --git a/drivers/media/dvb/ngene/Makefile b/drivers/media/dvb/ngene/Makefile
index 2bc96874..8987361 100644
--- a/drivers/media/dvb/ngene/Makefile
+++ b/drivers/media/dvb/ngene/Makefile
@@ -6,9 +6,9 @@
obj-$(CONFIG_DVB_NGENE) += ngene.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends/
-EXTRA_CFLAGS += -Idrivers/media/common/tuners/
+ccflags-y += -Idrivers/media/dvb/dvb-core/
+ccflags-y += -Idrivers/media/dvb/frontends/
+ccflags-y += -Idrivers/media/common/tuners/
# For the staging CI driver cxd2099
-EXTRA_CFLAGS += -Idrivers/staging/cxd2099/
+ccflags-y += -Idrivers/staging/cxd2099/
diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile
index 7ac1287..7008223 100644
--- a/drivers/media/dvb/pluto2/Makefile
+++ b/drivers/media/dvb/pluto2/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
+ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/pt1/Makefile b/drivers/media/dvb/pt1/Makefile
index a66da17..d80d8e8 100644
--- a/drivers/media/dvb/pt1/Makefile
+++ b/drivers/media/dvb/pt1/Makefile
@@ -2,4 +2,4 @@
obj-$(CONFIG_DVB_PT1) += earth-pt1.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/dvb/siano/Makefile
index c54140b..f233b57 100644
--- a/drivers/media/dvb/siano/Makefile
+++ b/drivers/media/dvb/siano/Makefile
@@ -5,7 +5,7 @@
obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/dvb/ttpci/Makefile b/drivers/media/dvb/ttpci/Makefile
index 8a4d5bb..f6e8693 100644
--- a/drivers/media/dvb/ttpci/Makefile
+++ b/drivers/media/dvb/ttpci/Makefile
@@ -17,5 +17,5 @@
obj-$(CONFIG_DVB_BUDGET_PATCH) += budget-patch.o
obj-$(CONFIG_DVB_AV7110) += dvb-ttpci.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
+ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index cdd31ca..ee8ee1d 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -25,6 +25,8 @@
* the project's page is at http://www.linuxtv.org/
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
@@ -253,7 +255,7 @@
switch (av7110->current_input) {
case 1:
- dprintk(1, "switching SAA7113 to Analog Tuner Input.\n");
+ dprintk(1, "switching SAA7113 to Analog Tuner Input\n");
msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0000); // loudspeaker source
msp_writereg(av7110, MSP_WR_DSP, 0x0009, 0x0000); // headphone source
msp_writereg(av7110, MSP_WR_DSP, 0x000a, 0x0000); // SCART 1 source
@@ -263,7 +265,7 @@
if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) {
if (ves1820_writereg(dev, 0x09, 0x0f, 0x60))
- dprintk(1, "setting band in demodulator failed.\n");
+ dprintk(1, "setting band in demodulator failed\n");
} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // TDA9819 pin9(STD)
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); // TDA9819 pin30(VIF)
@@ -272,17 +274,17 @@
dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num);
break;
case 2:
- dprintk(1, "switching SAA7113 to Video AV CVBS Input.\n");
+ dprintk(1, "switching SAA7113 to Video AV CVBS Input\n");
if (i2c_writereg(av7110, 0x48, 0x02, 0xd2) != 1)
dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num);
break;
case 3:
- dprintk(1, "switching SAA7113 to Video AV Y/C Input.\n");
+ dprintk(1, "switching SAA7113 to Video AV Y/C Input\n");
if (i2c_writereg(av7110, 0x48, 0x02, 0xd9) != 1)
dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num);
break;
default:
- dprintk(1, "switching SAA7113 to Input: AV7110: SAA7113: invalid input.\n");
+ dprintk(1, "switching SAA7113 to Input: AV7110: SAA7113: invalid input\n");
}
} else {
adswitch = 0;
@@ -299,7 +301,7 @@
if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) {
if (ves1820_writereg(dev, 0x09, 0x0f, 0x20))
- dprintk(1, "setting band in demodulator failed.\n");
+ dprintk(1, "setting band in demodulator failed\n");
} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
@@ -413,7 +415,7 @@
struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
- dprintk(2, "VIDIOC_G_FREQ: freq:0x%08x.\n", f->frequency);
+ dprintk(2, "VIDIOC_G_FREQ: freq:0x%08x\n", f->frequency);
if (!av7110->analog_tuner_flags || av7110->current_input != 1)
return -EINVAL;
@@ -429,7 +431,7 @@
struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
struct av7110 *av7110 = (struct av7110 *)dev->ext_priv;
- dprintk(2, "VIDIOC_S_FREQUENCY: freq:0x%08x.\n", f->frequency);
+ dprintk(2, "VIDIOC_S_FREQUENCY: freq:0x%08x\n", f->frequency);
if (!av7110->analog_tuner_flags || av7110->current_input != 1)
return -EINVAL;
@@ -689,12 +691,12 @@
if (i2c_writereg(av7110, 0x80, 0x0, 0x80) == 1 &&
i2c_writereg(av7110, 0x80, 0x0, 0) == 1) {
- printk("dvb-ttpci: DVB-C analog module @ card %d detected, initializing MSP3400\n",
+ pr_info("DVB-C analog module @ card %d detected, initializing MSP3400\n",
av7110->dvb_adapter.num);
av7110->adac_type = DVB_ADAC_MSP34x0;
} else if (i2c_writereg(av7110, 0x84, 0x0, 0x80) == 1 &&
i2c_writereg(av7110, 0x84, 0x0, 0) == 1) {
- printk("dvb-ttpci: DVB-C analog module @ card %d detected, initializing MSP3415\n",
+ pr_info("DVB-C analog module @ card %d detected, initializing MSP3415\n",
av7110->dvb_adapter.num);
av7110->adac_type = DVB_ADAC_MSP34x5;
} else
@@ -715,7 +717,7 @@
msp_writereg(av7110, MSP_WR_DSP, 0x000d, 0x1900); // prescale SCART
if (i2c_writereg(av7110, 0x48, 0x01, 0x00)!=1) {
- INFO(("saa7113 not accessible.\n"));
+ pr_info("saa7113 not accessible\n");
} else {
u8 *i = saa7113_init_regs;
@@ -733,7 +735,7 @@
/* setup for DVB by default */
if (av7110->analog_tuner_flags & ANALOG_TUNER_VES1820) {
if (ves1820_writereg(av7110->dev, 0x09, 0x0f, 0x20))
- dprintk(1, "setting band in demodulator failed.\n");
+ dprintk(1, "setting band in demodulator failed\n");
} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
@@ -797,7 +799,7 @@
ret = saa7146_vv_init(dev, vv_data);
if (ret) {
- ERR(("cannot init capture device. skipping.\n"));
+ ERR("cannot init capture device. skipping\n");
return -ENODEV;
}
vv_data->ops.vidioc_enum_input = vidioc_enum_input;
@@ -814,12 +816,12 @@
vv_data->ops.vidioc_s_fmt_sliced_vbi_out = vidioc_s_fmt_sliced_vbi_out;
if (saa7146_register_device(&av7110->v4l_dev, dev, "av7110", VFL_TYPE_GRABBER)) {
- ERR(("cannot register capture device. skipping.\n"));
+ ERR("cannot register capture device. skipping\n");
saa7146_vv_release(dev);
return -ENODEV;
}
if (saa7146_register_device(&av7110->vbi_dev, dev, "av7110", VFL_TYPE_VBI))
- ERR(("cannot register vbi v4l2 device. skipping.\n"));
+ ERR("cannot register vbi v4l2 device. skipping\n");
return 0;
}
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index e957d76..78d32f7 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -33,6 +33,8 @@
* the project's page is at http://www.linuxtv.org/
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "budget.h"
#include "stv0299.h"
#include "stb0899_drv.h"
@@ -149,7 +151,7 @@
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
if (result == -ETIMEDOUT) {
ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 1\n");
+ pr_info("cam ejected 1\n");
}
return result;
}
@@ -168,7 +170,7 @@
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
if (result == -ETIMEDOUT) {
ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 2\n");
+ pr_info("cam ejected 2\n");
}
return result;
}
@@ -187,7 +189,7 @@
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
if (result == -ETIMEDOUT) {
ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 3\n");
+ pr_info("cam ejected 3\n");
return -ETIMEDOUT;
}
return result;
@@ -207,7 +209,7 @@
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
if (result == -ETIMEDOUT) {
ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 5\n");
+ pr_info("cam ejected 5\n");
}
return result;
}
@@ -289,7 +291,7 @@
if (saa7146_read(saa, PSR) & MASK_06) {
if (budget_av->slot_status == SLOTSTATUS_NONE) {
budget_av->slot_status = SLOTSTATUS_PRESENT;
- printk(KERN_INFO "budget-av: cam inserted A\n");
+ pr_info("cam inserted A\n");
}
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
@@ -306,11 +308,11 @@
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
budget_av->slot_status = SLOTSTATUS_PRESENT;
- printk(KERN_INFO "budget-av: cam inserted B\n");
+ pr_info("cam inserted B\n");
} else if (result < 0) {
if (budget_av->slot_status != SLOTSTATUS_NONE) {
ciintf_slot_shutdown(ca, slot);
- printk(KERN_INFO "budget-av: cam ejected 5\n");
+ pr_info("cam ejected 5\n");
return 0;
}
}
@@ -365,11 +367,11 @@
if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
&budget_av->ca, 0, 1)) != 0) {
- printk(KERN_ERR "budget-av: ci initialisation failed.\n");
+ pr_err("ci initialisation failed\n");
goto error;
}
- printk(KERN_INFO "budget-av: ci interface initialised.\n");
+ pr_info("ci interface initialised\n");
return 0;
error:
@@ -896,7 +898,6 @@
{ STB0899_DISRX_ST0 , 0x04 },
{ STB0899_DISRX_ST1 , 0x00 },
{ STB0899_DISPARITY , 0x00 },
- { STB0899_DISFIFO , 0x00 },
{ STB0899_DISSTATUS , 0x20 },
{ STB0899_DISF22 , 0x8c },
{ STB0899_DISF22RX , 0x9a },
@@ -1197,6 +1198,7 @@
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_KNC1_MK3 0x0022
+#define SUBID_DVBC_KNC1_TDA10024 0x0028
#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023
#define SUBID_DVBC_CINERGY1200 0x1156
#define SUBID_DVBC_CINERGY1200_MK3 0x1176
@@ -1316,6 +1318,7 @@
case SUBID_DVBC_EASYWATCH_MK3:
case SUBID_DVBC_CINERGY1200_MK3:
case SUBID_DVBC_KNC1_MK3:
+ case SUBID_DVBC_KNC1_TDA10024:
case SUBID_DVBC_KNC1_PLUS_MK3:
budget_av->reinitialise_demod = 1;
budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
@@ -1343,8 +1346,7 @@
}
if (fe == NULL) {
- printk(KERN_ERR "budget-av: A frontend driver was not found "
- "for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
saa->pci->vendor,
saa->pci->device,
saa->pci->subsystem_vendor,
@@ -1356,7 +1358,7 @@
if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
budget_av->budget.dvb_frontend)) {
- printk(KERN_ERR "budget-av: Frontend registration failed!\n");
+ pr_err("Frontend registration failed!\n");
dvb_frontend_detach(budget_av->budget.dvb_frontend);
budget_av->budget.dvb_frontend = NULL;
}
@@ -1414,7 +1416,7 @@
static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
{
- dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
+ dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index);
if (i->index >= KNC1_INPUTS)
return -EINVAL;
memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
@@ -1428,7 +1430,7 @@
*i = budget_av->cur_input;
- dprintk(1, "VIDIOC_G_INPUT %d.\n", *i);
+ dprintk(1, "VIDIOC_G_INPUT %d\n", *i);
return 0;
}
@@ -1437,7 +1439,7 @@
struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
- dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
+ dprintk(1, "VIDIOC_S_INPUT %d\n", input);
return saa7113_setinput(budget_av, input);
}
@@ -1476,7 +1478,7 @@
if (0 != saa7146_vv_init(dev, &vv_data)) {
/* fixme: proper cleanup here */
- ERR(("cannot init vv subsystem.\n"));
+ ERR("cannot init vv subsystem\n");
return err;
}
vv_data.ops.vidioc_enum_input = vidioc_enum_input;
@@ -1485,7 +1487,7 @@
if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
/* fixme: proper cleanup here */
- ERR(("cannot register capture v4l2 device.\n"));
+ ERR("cannot register capture v4l2 device\n");
saa7146_vv_release(dev);
return err;
}
@@ -1502,13 +1504,12 @@
mac = budget_av->budget.dvb_adapter.proposed_mac;
if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
- printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
+ pr_err("KNC1-%d: Could not read MAC from KNC1 card\n",
budget_av->budget.dvb_adapter.num);
memset(mac, 0, 6);
} else {
- printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
- budget_av->budget.dvb_adapter.num,
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ pr_info("KNC1-%d: MAC addr = %pM\n",
+ budget_av->budget.dvb_adapter.num, mac);
}
budget_av->budget.dvb_adapter.priv = budget_av;
@@ -1558,6 +1559,7 @@
MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024);
MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
@@ -1587,6 +1589,7 @@
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
+ MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028),
MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 926f299..ca02e97 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -1053,7 +1053,6 @@
{ STB0899_DISRX_ST0 , 0x04 },
{ STB0899_DISRX_ST1 , 0x00 },
{ STB0899_DISPARITY , 0x00 },
- { STB0899_DISFIFO , 0x00 },
{ STB0899_DISSTATUS , 0x20 },
{ STB0899_DISF22 , 0x8c },
{ STB0899_DISF22RX , 0x9a },
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 37666d4..37d02fe 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -110,6 +110,7 @@
break;
case BUDGET_CIN1200C_MK3:
case BUDGET_KNC1C_MK3:
+ case BUDGET_KNC1C_TDA10024:
case BUDGET_KNC1CP_MK3:
if (budget->video_port == BUDGET_VIDEO_PORTA) {
saa7146_write(dev, DD1_INIT, 0x06000200);
@@ -434,6 +435,7 @@
case BUDGET_KNC1CP:
case BUDGET_CIN1200C:
case BUDGET_KNC1C_MK3:
+ case BUDGET_KNC1C_TDA10024:
case BUDGET_KNC1CP_MK3:
case BUDGET_CIN1200C_MK3:
budget->buffer_width = TS_WIDTH_DVBC;
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index 3ad0c67..3d8a806 100644
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -104,6 +104,7 @@
#define BUDGET_KNC1C_MK3 16
#define BUDGET_KNC1CP_MK3 17
#define BUDGET_KNC1S2 18
+#define BUDGET_KNC1C_TDA10024 19
#define BUDGET_VIDEO_PORTA 0
#define BUDGET_VIDEO_PORTB 1
diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/dvb/ttpci/ttpci-eeprom.c
index 7dd54b3..32d4315 100644
--- a/drivers/media/dvb/ttpci/ttpci-eeprom.c
+++ b/drivers/media/dvb/ttpci/ttpci-eeprom.c
@@ -85,6 +85,35 @@
return 0;
}
+int ttpci_eeprom_decode_mac(u8 *decodedMAC, u8 *encodedMAC)
+{
+ u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
+ 0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
+ 0x1d, 0x36, 0x64, 0x78};
+ u8 data[20];
+ int i;
+
+ memcpy(data, encodedMAC, 20);
+
+ for (i = 0; i < 20; i++)
+ data[i] ^= xor[i];
+ for (i = 0; i < 10; i++)
+ data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
+ >> ((data[2 * i + 1] >> 6) & 3);
+
+ if (check_mac_tt(data))
+ return -ENODEV;
+
+ decodedMAC[0] = data[2];
+ decodedMAC[1] = data[1];
+ decodedMAC[2] = data[0];
+ decodedMAC[3] = data[6];
+ decodedMAC[4] = data[5];
+ decodedMAC[5] = data[4];
+ return 0;
+}
+EXPORT_SYMBOL(ttpci_eeprom_decode_mac);
+
static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC)
{
int ret;
diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.h b/drivers/media/dvb/ttpci/ttpci-eeprom.h
index e2dc6cf..dcc33d5 100644
--- a/drivers/media/dvb/ttpci/ttpci-eeprom.h
+++ b/drivers/media/dvb/ttpci/ttpci-eeprom.h
@@ -28,6 +28,7 @@
#include <linux/types.h>
#include <linux/i2c.h>
+extern int ttpci_eeprom_decode_mac(u8 *decodedMAC, u8 *encodedMAC);
extern int ttpci_eeprom_parse_mac(struct i2c_adapter *adapter, u8 *propsed_mac);
#endif
diff --git a/drivers/media/dvb/ttusb-budget/Makefile b/drivers/media/dvb/ttusb-budget/Makefile
index fbe2b95..8d6c4ac 100644
--- a/drivers/media/dvb/ttusb-budget/Makefile
+++ b/drivers/media/dvb/ttusb-budget/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_DVB_TTUSB_BUDGET) += dvb-ttusb-budget.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/ttusb-dec/Makefile b/drivers/media/dvb/ttusb-dec/Makefile
index 2d70a82..ed28b53 100644
--- a/drivers/media/dvb/ttusb-dec/Makefile
+++ b/drivers/media/dvb/ttusb-dec/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_DVB_TTUSB_DEC) += ttusb_dec.o ttusbdecfe.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
+ccflags-y += -Idrivers/media/dvb/dvb-core/
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 52798a1..ccd5f0d 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -426,7 +426,6 @@
config RADIO_WL1273
tristate "Texas Instruments WL1273 I2C FM Radio"
depends on I2C && VIDEO_V4L2
- select MFD_CORE
select MFD_WL1273_CORE
select FW_LOADER
---help---
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index f484a6e..390daf9 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -27,4 +27,4 @@
obj-$(CONFIG_RADIO_WL1273) += radio-wl1273.o
obj-$(CONFIG_RADIO_WL128X) += wl128x/
-EXTRA_CFLAGS += -Isound
+ccflags-y += -Isound
diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c
index 444b4cf..d1fab58 100644
--- a/drivers/media/radio/radio-si4713.c
+++ b/drivers/media/radio/radio-si4713.c
@@ -92,10 +92,6 @@
static int radio_si4713_querycap(struct file *file, void *priv,
struct v4l2_capability *capability)
{
- struct radio_si4713_device *rsdev;
-
- rsdev = video_get_drvdata(video_devdata(file));
-
strlcpy(capability->driver, "radio-si4713", sizeof(capability->driver));
strlcpy(capability->card, "Silicon Labs Si4713 Modulator",
sizeof(capability->card));
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 46cacf8..6d1e4e7 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -2109,7 +2109,7 @@
V4L2_CID_TUNE_ANTENNA_CAPACITOR,
0, 255, 1, 255);
if (ctrl)
- ctrl->is_volatile = 1;
+ ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
if (radio->ctrl_handler.error) {
r = radio->ctrl_handler.error;
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 4cf5370..a6ad707 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -395,7 +395,6 @@
static void si470x_int_in_callback(struct urb *urb)
{
struct si470x_device *radio = urb->context;
- unsigned char buf[RDS_REPORT_SIZE];
int retval;
unsigned char regnr;
unsigned char blocknum;
@@ -423,7 +422,6 @@
if (urb->actual_length > 0) {
/* Update RDS registers with URB data */
- buf[0] = RDS_REPORT;
for (regnr = 0; regnr < RDS_REGISTER_NUM; regnr++)
radio->registers[STATUSRSSI + regnr] =
get_unaligned_be16(&radio->int_in_buffer[
diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index ec1d52f..b93d8cf 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -84,12 +84,14 @@
ret = copy_from_user(&rds, buf, sizeof(rds));
fmdbg("(%d)type: %d, text %s, af %d\n",
ret, rds.text_type, rds.text, rds.af_freq);
+ if (ret)
+ return -EFAULT;
fmdev = video_drvdata(file);
fm_tx_set_radio_text(fmdev, rds.text, rds.text_type);
fm_tx_set_af(fmdev, rds.af_freq);
- return 0;
+ return sizeof(rds);
}
static u32 fm_v4l2_fops_poll(struct file *file, struct poll_table_struct *pts)
@@ -557,7 +559,7 @@
255, 1, 255);
if (ctrl)
- ctrl->is_volatile = 1;
+ ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
return 0;
}
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 899f783..aeb7f43 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -4,8 +4,8 @@
default INPUT
---help---
Enable support for Remote Controllers on Linux. This is
- needed in order to support several video capture adapters.
- Currently, all supported devices use InfraRed.
+ needed in order to support several video capture adapters,
+ standalone IR receivers/transmitters, and RF receivers.
Enable this option if you have a video capture board even
if you don't need IR, as otherwise, you may not be able to
@@ -108,6 +108,25 @@
Enable this option to pass raw IR to and from userspace via
the LIRC interface.
+config RC_ATI_REMOTE
+ tristate "ATI / X10 based USB RF remote controls"
+ depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
+ select USB
+ help
+ Say Y here if you want to use an X10 based USB remote control.
+ These are RF remotes with USB receivers.
+
+ Such devices include the ATI remote that comes with many of ATI's
+ All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
+ Medion RF remote, and SnapStream FireFly remote.
+
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote.
+
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index f224db0..2156e786 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
# stand-alone IR receivers/transmitters
+obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_IR_IMON) += imon.o
obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
obj-$(CONFIG_IR_MCEUSB) += mceusb.o
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
new file mode 100644
index 0000000..303f22e
--- /dev/null
+++ b/drivers/media/rc/ati_remote.c
@@ -0,0 +1,946 @@
+/*
+ * USB ATI Remote support
+ *
+ * Copyright (c) 2011 Anssi Hannula <anssi.hannula@iki.fi>
+ * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
+ *
+ * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
+ * porting to the 2.6 kernel interfaces, along with other modification
+ * to better match the style of the existing usb/input drivers. However, the
+ * protocol and hardware handling is essentially unchanged from 2.1.1.
+ *
+ * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
+ * Vojtech Pavlik.
+ *
+ * Changes:
+ *
+ * Feb 2004: Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.2.0
+ * Jun 2004: Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.2.1
+ * Added key repeat support contributed by:
+ * Vincent Vanackere <vanackere@lif.univ-mrs.fr>
+ * Added support for the "Lola" remote contributed by:
+ * Seth Cohn <sethcohn@yahoo.com>
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * Hardware & software notes
+ *
+ * These remote controls are distributed by ATI as part of their
+ * "All-In-Wonder" video card packages. The receiver self-identifies as a
+ * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
+ *
+ * The "Lola" remote is available from X10. See:
+ * http://www.x10.com/products/lola_sg1.htm
+ * The Lola is similar to the ATI remote but has no mouse support, and slightly
+ * different keys.
+ *
+ * It is possible to use multiple receivers and remotes on multiple computers
+ * simultaneously by configuring them to use specific channels.
+ *
+ * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
+ * Actually, it may even support more, at least in some revisions of the
+ * hardware.
+ *
+ * Each remote can be configured to transmit on one channel as follows:
+ * - Press and hold the "hand icon" button.
+ * - When the red LED starts to blink, let go of the "hand icon" button.
+ * - When it stops blinking, input the channel code as two digits, from 01
+ * to 16, and press the hand icon again.
+ *
+ * The timing can be a little tricky. Try loading the module with debug=1
+ * to have the kernel print out messages about the remote control number
+ * and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
+ *
+ * The driver has a "channel_mask" parameter. This bitmask specifies which
+ * channels will be ignored by the module. To mask out channels, just add
+ * all the 2^channel_number values together.
+ *
+ * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
+ * ignore signals coming from remote controls transmitting on channel 4, but
+ * accept all other channels.
+ *
+ * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
+ * ignored.
+ *
+ * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
+ * parameter are unused.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/usb/input.h>
+#include <linux/wait.h>
+#include <linux/jiffies.h>
+#include <media/rc-core.h>
+
+/*
+ * Module and Version Information, Module Parameters
+ */
+
+#define ATI_REMOTE_VENDOR_ID 0x0bc7
+#define LOLA_REMOTE_PRODUCT_ID 0x0002
+#define LOLA2_REMOTE_PRODUCT_ID 0x0003
+#define ATI_REMOTE_PRODUCT_ID 0x0004
+#define NVIDIA_REMOTE_PRODUCT_ID 0x0005
+#define MEDION_REMOTE_PRODUCT_ID 0x0006
+#define FIREFLY_REMOTE_PRODUCT_ID 0x0008
+
+#define DRIVER_VERSION "2.2.1"
+#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
+#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
+
+#define NAME_BUFSIZE 80 /* size of product name, path buffers */
+#define DATA_BUFSIZE 63 /* size of URB data buffers */
+
+/*
+ * Duplicate event filtering time.
+ * Sequential, identical KIND_FILTERED inputs with less than
+ * FILTER_TIME milliseconds between them are considered as repeat
+ * events. The hardware generates 5 events for the first keypress
+ * and we have to take this into account for an accurate repeat
+ * behaviour.
+ */
+#define FILTER_TIME 60 /* msec */
+#define REPEAT_DELAY 500 /* msec */
+
+static unsigned long channel_mask;
+module_param(channel_mask, ulong, 0644);
+MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+static int repeat_filter = FILTER_TIME;
+module_param(repeat_filter, int, 0644);
+MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
+
+static int repeat_delay = REPEAT_DELAY;
+module_param(repeat_delay, int, 0644);
+MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
+
+static bool mouse = true;
+module_param(mouse, bool, 0444);
+MODULE_PARM_DESC(mouse, "Enable mouse device, default = yes");
+
+#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
+#undef err
+#define err(format, arg...) printk(KERN_ERR format , ## arg)
+
+static struct usb_device_id ati_remote_table[] = {
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID), .driver_info = (unsigned long)RC_MAP_ATI_X10 },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID), .driver_info = (unsigned long)RC_MAP_ATI_X10 },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID), .driver_info = (unsigned long)RC_MAP_ATI_X10 },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID), .driver_info = (unsigned long)RC_MAP_ATI_X10 },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID), .driver_info = (unsigned long)RC_MAP_MEDION_X10 },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, FIREFLY_REMOTE_PRODUCT_ID), .driver_info = (unsigned long)RC_MAP_SNAPSTREAM_FIREFLY },
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ati_remote_table);
+
+/* Get hi and low bytes of a 16-bits int */
+#define HI(a) ((unsigned char)((a) >> 8))
+#define LO(a) ((unsigned char)((a) & 0xff))
+
+#define SEND_FLAG_IN_PROGRESS 1
+#define SEND_FLAG_COMPLETE 2
+
+/* Device initialization strings */
+static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
+static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
+
+struct ati_remote {
+ struct input_dev *idev;
+ struct rc_dev *rdev;
+ struct usb_device *udev;
+ struct usb_interface *interface;
+
+ struct urb *irq_urb;
+ struct urb *out_urb;
+ struct usb_endpoint_descriptor *endpoint_in;
+ struct usb_endpoint_descriptor *endpoint_out;
+ unsigned char *inbuf;
+ unsigned char *outbuf;
+ dma_addr_t inbuf_dma;
+ dma_addr_t outbuf_dma;
+
+ unsigned char old_data[2]; /* Detect duplicate events */
+ unsigned long old_jiffies;
+ unsigned long acc_jiffies; /* handle acceleration */
+ unsigned long first_jiffies;
+
+ unsigned int repeat_count;
+
+ char rc_name[NAME_BUFSIZE];
+ char rc_phys[NAME_BUFSIZE];
+ char mouse_name[NAME_BUFSIZE];
+ char mouse_phys[NAME_BUFSIZE];
+
+ wait_queue_head_t wait;
+ int send_flags;
+
+ int users; /* 0-2, users are rc and input */
+ struct mutex open_mutex;
+};
+
+/* "Kinds" of messages sent from the hardware to the driver. */
+#define KIND_END 0
+#define KIND_LITERAL 1 /* Simply pass to input system */
+#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */
+#define KIND_LU 3 /* Directional keypad diagonals - left up, */
+#define KIND_RU 4 /* right up, */
+#define KIND_LD 5 /* left down, */
+#define KIND_RD 6 /* right down */
+#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
+
+/* Translation table from hardware messages to input events. */
+static const struct {
+ short kind;
+ unsigned char data1, data2;
+ int type;
+ unsigned int code;
+ int value;
+} ati_remote_tbl[] = {
+ /* Directional control pad axes */
+ {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
+ {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
+ {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
+ {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
+ /* Directional control pad diagonals */
+ {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
+ {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
+ {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
+ {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
+
+ /* "Mouse button" buttons */
+ {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
+ {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
+ {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
+ {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
+
+ /* Artificial "doubleclick" events are generated by the hardware.
+ * They are mapped to the "side" and "extra" mouse buttons here. */
+ {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
+ {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
+
+ /* Non-mouse events are handled by rc-core */
+ {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
+};
+
+/* Local function prototypes */
+static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
+static void ati_remote_irq_out (struct urb *urb);
+static void ati_remote_irq_in (struct urb *urb);
+static void ati_remote_input_report (struct urb *urb);
+static int ati_remote_initialize (struct ati_remote *ati_remote);
+static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id);
+static void ati_remote_disconnect (struct usb_interface *interface);
+
+/* usb specific object to register with the usb subsystem */
+static struct usb_driver ati_remote_driver = {
+ .name = "ati_remote",
+ .probe = ati_remote_probe,
+ .disconnect = ati_remote_disconnect,
+ .id_table = ati_remote_table,
+};
+
+/*
+ * ati_remote_dump_input
+ */
+static void ati_remote_dump(struct device *dev, unsigned char *data,
+ unsigned int len)
+{
+ if (len == 1) {
+ if (data[0] != (unsigned char)0xff && data[0] != 0x00)
+ dev_warn(dev, "Weird byte 0x%02x\n", data[0]);
+ } else if (len == 4)
+ dev_warn(dev, "Weird key %02x %02x %02x %02x\n",
+ data[0], data[1], data[2], data[3]);
+ else
+ dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n",
+ len, data[0], data[1], data[2], data[3], data[4], data[5]);
+}
+
+/*
+ * ati_remote_open
+ */
+static int ati_remote_open(struct ati_remote *ati_remote)
+{
+ int err = 0;
+
+ mutex_lock(&ati_remote->open_mutex);
+
+ if (ati_remote->users++ != 0)
+ goto out; /* one was already active */
+
+ /* On first open, submit the read urb which was set up previously. */
+ ati_remote->irq_urb->dev = ati_remote->udev;
+ if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
+ dev_err(&ati_remote->interface->dev,
+ "%s: usb_submit_urb failed!\n", __func__);
+ err = -EIO;
+ }
+
+out: mutex_unlock(&ati_remote->open_mutex);
+ return err;
+}
+
+/*
+ * ati_remote_close
+ */
+static void ati_remote_close(struct ati_remote *ati_remote)
+{
+ mutex_lock(&ati_remote->open_mutex);
+ if (--ati_remote->users == 0)
+ usb_kill_urb(ati_remote->irq_urb);
+ mutex_unlock(&ati_remote->open_mutex);
+}
+
+static int ati_remote_input_open(struct input_dev *inputdev)
+{
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+ return ati_remote_open(ati_remote);
+}
+
+static void ati_remote_input_close(struct input_dev *inputdev)
+{
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+ ati_remote_close(ati_remote);
+}
+
+static int ati_remote_rc_open(struct rc_dev *rdev)
+{
+ struct ati_remote *ati_remote = rdev->priv;
+ return ati_remote_open(ati_remote);
+}
+
+static void ati_remote_rc_close(struct rc_dev *rdev)
+{
+ struct ati_remote *ati_remote = rdev->priv;
+ ati_remote_close(ati_remote);
+}
+
+/*
+ * ati_remote_irq_out
+ */
+static void ati_remote_irq_out(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+
+ if (urb->status) {
+ dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
+ __func__, urb->status);
+ return;
+ }
+
+ ati_remote->send_flags |= SEND_FLAG_COMPLETE;
+ wmb();
+ wake_up(&ati_remote->wait);
+}
+
+/*
+ * ati_remote_sendpacket
+ *
+ * Used to send device initialization strings
+ */
+static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
+{
+ int retval = 0;
+
+ /* Set up out_urb */
+ memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
+ ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
+
+ ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
+ ati_remote->out_urb->dev = ati_remote->udev;
+ ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
+
+ retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
+ if (retval) {
+ dev_dbg(&ati_remote->interface->dev,
+ "sendpacket: usb_submit_urb failed: %d\n", retval);
+ return retval;
+ }
+
+ wait_event_timeout(ati_remote->wait,
+ ((ati_remote->out_urb->status != -EINPROGRESS) ||
+ (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
+ HZ);
+ usb_kill_urb(ati_remote->out_urb);
+
+ return retval;
+}
+
+/*
+ * ati_remote_event_lookup
+ */
+static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
+{
+ int i;
+
+ for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
+ /*
+ * Decide if the table entry matches the remote input.
+ */
+ if (ati_remote_tbl[i].data1 == d1 &&
+ ati_remote_tbl[i].data2 == d2)
+ return i;
+
+ }
+ return -1;
+}
+
+/*
+ * ati_remote_compute_accel
+ *
+ * Implements acceleration curve for directional control pad
+ * If elapsed time since last event is > 1/4 second, user "stopped",
+ * so reset acceleration. Otherwise, user is probably holding the control
+ * pad down, so we increase acceleration, ramping up over two seconds to
+ * a maximum speed.
+ */
+static int ati_remote_compute_accel(struct ati_remote *ati_remote)
+{
+ static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
+ unsigned long now = jiffies;
+ int acc;
+
+ if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
+ acc = 1;
+ ati_remote->acc_jiffies = now;
+ }
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
+ acc = accel[0];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
+ acc = accel[1];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
+ acc = accel[2];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
+ acc = accel[3];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
+ acc = accel[4];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
+ acc = accel[5];
+ else
+ acc = accel[6];
+
+ return acc;
+}
+
+/*
+ * ati_remote_report_input
+ */
+static void ati_remote_input_report(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+ unsigned char *data= ati_remote->inbuf;
+ struct input_dev *dev = ati_remote->idev;
+ int index = -1;
+ int acc;
+ int remote_num;
+ unsigned char scancode[2];
+
+ /* Deal with strange looking inputs */
+ if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
+ ((data[3] & 0x0f) != 0x00) ) {
+ ati_remote_dump(&urb->dev->dev, data, urb->actual_length);
+ return;
+ }
+
+ /* Mask unwanted remote channels. */
+ /* note: remote_num is 0-based, channel 1 on remote == 0 here */
+ remote_num = (data[3] >> 4) & 0x0f;
+ if (channel_mask & (1 << (remote_num + 1))) {
+ dbginfo(&ati_remote->interface->dev,
+ "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
+ remote_num, data[1], data[2], channel_mask);
+ return;
+ }
+
+ scancode[0] = (((data[1] - ((remote_num + 1) << 4)) & 0xf0) | (data[1] & 0x0f));
+
+ /*
+ * Some devices (e.g. SnapStream Firefly) use 8080 as toggle code,
+ * so we have to clear them. The first bit is a bit tricky as the
+ * "non-toggled" state depends on remote_num, so we xor it with the
+ * second bit which is only used for toggle.
+ */
+ scancode[0] ^= (data[2] & 0x80);
+
+ scancode[1] = data[2] & ~0x80;
+
+ /* Look up event code index in mouse translation table. */
+ index = ati_remote_event_lookup(remote_num, scancode[0], scancode[1]);
+
+ if (index >= 0) {
+ dbginfo(&ati_remote->interface->dev,
+ "channel 0x%02x; mouse data %02x,%02x; index %d; keycode %d\n",
+ remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+ if (!dev)
+ return; /* no mouse device */
+ } else
+ dbginfo(&ati_remote->interface->dev,
+ "channel 0x%02x; key data %02x,%02x, scancode %02x,%02x\n",
+ remote_num, data[1], data[2], scancode[0], scancode[1]);
+
+
+ if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) {
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code,
+ ati_remote_tbl[index].value);
+ input_sync(dev);
+
+ ati_remote->old_jiffies = jiffies;
+ return;
+ }
+
+ if (index < 0 || ati_remote_tbl[index].kind == KIND_FILTERED) {
+ unsigned long now = jiffies;
+
+ /* Filter duplicate events which happen "too close" together. */
+ if (ati_remote->old_data[0] == data[1] &&
+ ati_remote->old_data[1] == data[2] &&
+ time_before(now, ati_remote->old_jiffies +
+ msecs_to_jiffies(repeat_filter))) {
+ ati_remote->repeat_count++;
+ } else {
+ ati_remote->repeat_count = 0;
+ ati_remote->first_jiffies = now;
+ }
+
+ ati_remote->old_data[0] = data[1];
+ ati_remote->old_data[1] = data[2];
+ ati_remote->old_jiffies = now;
+
+ /* Ensure we skip at least the 4 first duplicate events (generated
+ * by a single keypress), and continue skipping until repeat_delay
+ * msecs have passed
+ */
+ if (ati_remote->repeat_count > 0 &&
+ (ati_remote->repeat_count < 5 ||
+ time_before(now, ati_remote->first_jiffies +
+ msecs_to_jiffies(repeat_delay))))
+ return;
+
+ if (index < 0) {
+ /* Not a mouse event, hand it to rc-core. */
+ u32 rc_code = (scancode[0] << 8) | scancode[1];
+
+ /*
+ * We don't use the rc-core repeat handling yet as
+ * it would cause ghost repeats which would be a
+ * regression for this driver.
+ */
+ rc_keydown_notimeout(ati_remote->rdev, rc_code,
+ data[2]);
+ rc_keyup(ati_remote->rdev);
+ return;
+ }
+
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code, 1);
+ input_sync(dev);
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code, 0);
+ input_sync(dev);
+
+ } else {
+
+ /*
+ * Other event kinds are from the directional control pad, and have an
+ * acceleration factor applied to them. Without this acceleration, the
+ * control pad is mostly unusable.
+ */
+ acc = ati_remote_compute_accel(ati_remote);
+
+ switch (ati_remote_tbl[index].kind) {
+ case KIND_ACCEL:
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code,
+ ati_remote_tbl[index].value * acc);
+ break;
+ case KIND_LU:
+ input_report_rel(dev, REL_X, -acc);
+ input_report_rel(dev, REL_Y, -acc);
+ break;
+ case KIND_RU:
+ input_report_rel(dev, REL_X, acc);
+ input_report_rel(dev, REL_Y, -acc);
+ break;
+ case KIND_LD:
+ input_report_rel(dev, REL_X, -acc);
+ input_report_rel(dev, REL_Y, acc);
+ break;
+ case KIND_RD:
+ input_report_rel(dev, REL_X, acc);
+ input_report_rel(dev, REL_Y, acc);
+ break;
+ default:
+ dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
+ ati_remote_tbl[index].kind);
+ }
+ input_sync(dev);
+
+ ati_remote->old_jiffies = jiffies;
+ ati_remote->old_data[0] = data[1];
+ ati_remote->old_data[1] = data[2];
+ }
+}
+
+/*
+ * ati_remote_irq_in
+ */
+static void ati_remote_irq_in(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0: /* success */
+ ati_remote_input_report(urb);
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
+ __func__);
+ return;
+ default: /* error */
+ dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
+ __func__, urb->status);
+ }
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
+ __func__, retval);
+}
+
+/*
+ * ati_remote_alloc_buffers
+ */
+static int ati_remote_alloc_buffers(struct usb_device *udev,
+ struct ati_remote *ati_remote)
+{
+ ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+ &ati_remote->inbuf_dma);
+ if (!ati_remote->inbuf)
+ return -1;
+
+ ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+ &ati_remote->outbuf_dma);
+ if (!ati_remote->outbuf)
+ return -1;
+
+ ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->irq_urb)
+ return -1;
+
+ ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->out_urb)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * ati_remote_free_buffers
+ */
+static void ati_remote_free_buffers(struct ati_remote *ati_remote)
+{
+ usb_free_urb(ati_remote->irq_urb);
+ usb_free_urb(ati_remote->out_urb);
+
+ usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->inbuf, ati_remote->inbuf_dma);
+
+ usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->outbuf, ati_remote->outbuf_dma);
+}
+
+static void ati_remote_input_init(struct ati_remote *ati_remote)
+{
+ struct input_dev *idev = ati_remote->idev;
+ int i;
+
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
+ idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+ for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
+ if (ati_remote_tbl[i].type == EV_KEY)
+ set_bit(ati_remote_tbl[i].code, idev->keybit);
+
+ input_set_drvdata(idev, ati_remote);
+
+ idev->open = ati_remote_input_open;
+ idev->close = ati_remote_input_close;
+
+ idev->name = ati_remote->mouse_name;
+ idev->phys = ati_remote->mouse_phys;
+
+ usb_to_input_id(ati_remote->udev, &idev->id);
+ idev->dev.parent = &ati_remote->interface->dev;
+}
+
+static void ati_remote_rc_init(struct ati_remote *ati_remote)
+{
+ struct rc_dev *rdev = ati_remote->rdev;
+
+ rdev->priv = ati_remote;
+ rdev->driver_type = RC_DRIVER_SCANCODE;
+ rdev->allowed_protos = RC_TYPE_OTHER;
+ rdev->driver_name = "ati_remote";
+
+ rdev->open = ati_remote_rc_open;
+ rdev->close = ati_remote_rc_close;
+
+ rdev->input_name = ati_remote->rc_name;
+ rdev->input_phys = ati_remote->rc_phys;
+
+ usb_to_input_id(ati_remote->udev, &rdev->input_id);
+ rdev->dev.parent = &ati_remote->interface->dev;
+}
+
+static int ati_remote_initialize(struct ati_remote *ati_remote)
+{
+ struct usb_device *udev = ati_remote->udev;
+ int pipe, maxp;
+
+ init_waitqueue_head(&ati_remote->wait);
+
+ /* Set up irq_urb */
+ pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+ usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
+ maxp, ati_remote_irq_in, ati_remote,
+ ati_remote->endpoint_in->bInterval);
+ ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
+ ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* Set up out_urb */
+ pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+ usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
+ maxp, ati_remote_irq_out, ati_remote,
+ ati_remote->endpoint_out->bInterval);
+ ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
+ ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* send initialization strings */
+ if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
+ (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
+ dev_err(&ati_remote->interface->dev,
+ "Initializing ati_remote hardware failed.\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * ati_remote_probe
+ */
+static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *iface_host = interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
+ struct ati_remote *ati_remote;
+ struct input_dev *input_dev;
+ struct rc_dev *rc_dev;
+ int err = -ENOMEM;
+
+ if (iface_host->desc.bNumEndpoints != 2) {
+ err("%s: Unexpected desc.bNumEndpoints\n", __func__);
+ return -ENODEV;
+ }
+
+ endpoint_in = &iface_host->endpoint[0].desc;
+ endpoint_out = &iface_host->endpoint[1].desc;
+
+ if (!usb_endpoint_is_int_in(endpoint_in)) {
+ err("%s: Unexpected endpoint_in\n", __func__);
+ return -ENODEV;
+ }
+ if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
+ err("%s: endpoint_in message size==0? \n", __func__);
+ return -ENODEV;
+ }
+
+ ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
+ rc_dev = rc_allocate_device();
+ if (!ati_remote || !rc_dev)
+ goto fail1;
+
+ /* Allocate URB buffers, URBs */
+ if (ati_remote_alloc_buffers(udev, ati_remote))
+ goto fail2;
+
+ ati_remote->endpoint_in = endpoint_in;
+ ati_remote->endpoint_out = endpoint_out;
+ ati_remote->udev = udev;
+ ati_remote->rdev = rc_dev;
+ ati_remote->interface = interface;
+
+ usb_make_path(udev, ati_remote->rc_phys, sizeof(ati_remote->rc_phys));
+ strlcpy(ati_remote->mouse_phys, ati_remote->rc_phys,
+ sizeof(ati_remote->mouse_phys));
+
+ strlcat(ati_remote->rc_phys, "/input0", sizeof(ati_remote->rc_phys));
+ strlcat(ati_remote->mouse_phys, "/input1", sizeof(ati_remote->mouse_phys));
+
+ if (udev->manufacturer)
+ strlcpy(ati_remote->rc_name, udev->manufacturer,
+ sizeof(ati_remote->rc_name));
+
+ if (udev->product)
+ snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name),
+ "%s %s", ati_remote->rc_name, udev->product);
+
+ if (!strlen(ati_remote->rc_name))
+ snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name),
+ DRIVER_DESC "(%04x,%04x)",
+ le16_to_cpu(ati_remote->udev->descriptor.idVendor),
+ le16_to_cpu(ati_remote->udev->descriptor.idProduct));
+
+ snprintf(ati_remote->mouse_name, sizeof(ati_remote->mouse_name),
+ "%s mouse", ati_remote->rc_name);
+
+ if (id->driver_info)
+ rc_dev->map_name = (const char *)id->driver_info;
+ else
+ rc_dev->map_name = RC_MAP_ATI_X10;
+
+ ati_remote_rc_init(ati_remote);
+ mutex_init(&ati_remote->open_mutex);
+
+ /* Device Hardware Initialization - fills in ati_remote->idev from udev. */
+ err = ati_remote_initialize(ati_remote);
+ if (err)
+ goto fail3;
+
+ /* Set up and register rc device */
+ err = rc_register_device(ati_remote->rdev);
+ if (err)
+ goto fail3;
+
+ /* use our delay for rc_dev */
+ ati_remote->rdev->input_dev->rep[REP_DELAY] = repeat_delay;
+
+ /* Set up and register mouse input device */
+ if (mouse) {
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ goto fail4;
+
+ ati_remote->idev = input_dev;
+ ati_remote_input_init(ati_remote);
+ err = input_register_device(input_dev);
+
+ if (err)
+ goto fail5;
+ }
+
+ usb_set_intfdata(interface, ati_remote);
+ return 0;
+
+ fail5: input_free_device(input_dev);
+ fail4: rc_unregister_device(rc_dev);
+ rc_dev = NULL;
+ fail3: usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ fail2: ati_remote_free_buffers(ati_remote);
+ fail1: rc_free_device(rc_dev);
+ kfree(ati_remote);
+ return err;
+}
+
+/*
+ * ati_remote_disconnect
+ */
+static void ati_remote_disconnect(struct usb_interface *interface)
+{
+ struct ati_remote *ati_remote;
+
+ ati_remote = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+ if (!ati_remote) {
+ dev_warn(&interface->dev, "%s - null device?\n", __func__);
+ return;
+ }
+
+ usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ if (ati_remote->idev)
+ input_unregister_device(ati_remote->idev);
+ rc_unregister_device(ati_remote->rdev);
+ ati_remote_free_buffers(ati_remote);
+ kfree(ati_remote);
+}
+
+/*
+ * ati_remote_init
+ */
+static int __init ati_remote_init(void)
+{
+ int result;
+
+ result = usb_register(&ati_remote_driver);
+ if (result)
+ printk(KERN_ERR KBUILD_MODNAME
+ ": usb_register error #%d\n", result);
+ else
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
+
+ return result;
+}
+
+/*
+ * ati_remote_exit
+ */
+static void __exit ati_remote_exit(void)
+{
+ usb_deregister(&ati_remote_driver);
+}
+
+/*
+ * module specification
+ */
+
+module_init(ati_remote_init);
+module_exit(ati_remote_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 2b9c2569..cf10ecf 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -30,6 +30,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pnp.h>
@@ -118,31 +120,31 @@
dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;
if (hw_revision == 0xFF) {
- ene_warn("device seems to be disabled");
- ene_warn("send a mail to lirc-list@lists.sourceforge.net");
- ene_warn("please attach output of acpidump and dmidecode");
+ pr_warn("device seems to be disabled\n");
+ pr_warn("send a mail to lirc-list@lists.sourceforge.net\n");
+ pr_warn("please attach output of acpidump and dmidecode\n");
return -ENODEV;
}
- ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x",
- chip_major, chip_minor, old_ver, hw_revision);
+ pr_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+ chip_major, chip_minor, old_ver, hw_revision);
- ene_notice("PLL freq = %d", dev->pll_freq);
+ pr_notice("PLL freq = %d\n", dev->pll_freq);
if (chip_major == 0x33) {
- ene_warn("chips 0x33xx aren't supported");
+ pr_warn("chips 0x33xx aren't supported\n");
return -ENODEV;
}
if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
dev->hw_revision = ENE_HW_C;
- ene_notice("KB3926C detected");
+ pr_notice("KB3926C detected\n");
} else if (old_ver == 0x24 && hw_revision == 0xC0) {
dev->hw_revision = ENE_HW_B;
- ene_notice("KB3926B detected");
+ pr_notice("KB3926B detected\n");
} else {
dev->hw_revision = ENE_HW_D;
- ene_notice("KB3926D or higher detected");
+ pr_notice("KB3926D or higher detected\n");
}
/* detect features hardware supports */
@@ -152,7 +154,7 @@
fw_reg1 = ene_read_reg(dev, ENE_FW1);
fw_reg2 = ene_read_reg(dev, ENE_FW2);
- ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2);
+ pr_notice("Firmware regs: %02x %02x\n", fw_reg1, fw_reg2);
dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);
dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);
@@ -161,30 +163,29 @@
if (dev->hw_learning_and_tx_capable)
dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);
- ene_notice("Hardware features:");
+ pr_notice("Hardware features:\n");
if (dev->hw_learning_and_tx_capable) {
- ene_notice("* Supports transmitting & learning mode");
- ene_notice(" This feature is rare and therefore,");
- ene_notice(" you are welcome to test it,");
- ene_notice(" and/or contact the author via:");
- ene_notice(" lirc-list@lists.sourceforge.net");
- ene_notice(" or maximlevitsky@gmail.com");
+ pr_notice("* Supports transmitting & learning mode\n");
+ pr_notice(" This feature is rare and therefore,\n");
+ pr_notice(" you are welcome to test it,\n");
+ pr_notice(" and/or contact the author via:\n");
+ pr_notice(" lirc-list@lists.sourceforge.net\n");
+ pr_notice(" or maximlevitsky@gmail.com\n");
- ene_notice("* Uses GPIO %s for IR raw input",
- dev->hw_use_gpio_0a ? "40" : "0A");
+ pr_notice("* Uses GPIO %s for IR raw input\n",
+ dev->hw_use_gpio_0a ? "40" : "0A");
if (dev->hw_fan_input)
- ene_notice("* Uses unused fan feedback input as source"
- " of demodulated IR data");
+ pr_notice("* Uses unused fan feedback input as source of demodulated IR data\n");
}
if (!dev->hw_fan_input)
- ene_notice("* Uses GPIO %s for IR demodulated input",
- dev->hw_use_gpio_0a ? "0A" : "40");
+ pr_notice("* Uses GPIO %s for IR demodulated input\n",
+ dev->hw_use_gpio_0a ? "0A" : "40");
if (dev->hw_extra_buffer)
- ene_notice("* Uses new style input buffer");
+ pr_notice("* Uses new style input buffer\n");
return 0;
}
@@ -215,13 +216,13 @@
dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;
- ene_notice("Hardware uses 2 extended buffers:");
- ene_notice(" 0x%04x - len : %d", dev->extra_buf1_address,
- dev->extra_buf1_len);
- ene_notice(" 0x%04x - len : %d", dev->extra_buf2_address,
- dev->extra_buf2_len);
+ pr_notice("Hardware uses 2 extended buffers:\n");
+ pr_notice(" 0x%04x - len : %d\n",
+ dev->extra_buf1_address, dev->extra_buf1_len);
+ pr_notice(" 0x%04x - len : %d\n",
+ dev->extra_buf2_address, dev->extra_buf2_len);
- ene_notice("Total buffer len = %d", dev->buffer_len);
+ pr_notice("Total buffer len = %d\n", dev->buffer_len);
if (dev->buffer_len > 64 || dev->buffer_len < 16)
goto error;
@@ -240,7 +241,7 @@
ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
return;
error:
- ene_warn("Error validating extra buffers, device probably won't work");
+ pr_warn("Error validating extra buffers, device probably won't work\n");
dev->hw_extra_buffer = false;
ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
}
@@ -588,7 +589,7 @@
dbg("TX: Transmitter #2 is connected");
if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))
- ene_warn("TX: transmitter cable isn't connected!");
+ pr_warn("TX: transmitter cable isn't connected!\n");
/* disable receive on revc */
if (dev->hw_revision == ENE_HW_C)
@@ -615,7 +616,7 @@
bool pulse = dev->tx_sample_pulse;
if (!dev->tx_buffer) {
- ene_warn("TX: BUG: attempt to transmit NULL buffer");
+ pr_warn("TX: BUG: attempt to transmit NULL buffer\n");
return;
}
@@ -1049,7 +1050,7 @@
dev->hw_learning_and_tx_capable = true;
setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
(long unsigned int)dev);
- ene_warn("Simulation of TX activated");
+ pr_warn("Simulation of TX activated\n");
}
if (!dev->hw_learning_and_tx_capable)
@@ -1089,7 +1090,7 @@
if (error < 0)
goto error;
- ene_notice("driver has been successfully loaded");
+ pr_notice("driver has been successfully loaded\n");
return 0;
error:
if (dev && dev->irq >= 0)
diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
index 017c209..fd108d9 100644
--- a/drivers/media/rc/ene_ir.h
+++ b/drivers/media/rc/ene_ir.h
@@ -182,20 +182,11 @@
#define ENE_HW_C 2 /* 3926C */
#define ENE_HW_D 3 /* 3926D or later */
-#define ene_printk(level, text, ...) \
- printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
-
-#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
-#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
-
-
-#define __dbg(level, format, ...) \
- do { \
- if (debug >= level) \
- printk(KERN_DEBUG ENE_DRIVER_NAME \
- ": " format "\n", ## __VA_ARGS__); \
- } while (0)
-
+#define __dbg(level, format, ...) \
+do { \
+ if (debug >= level) \
+ pr_debug(format "\n", ## __VA_ARGS__); \
+} while (0)
#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__)
#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 6bc35ee..6ed9646 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -34,6 +34,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/ratelimit.h>
#include <linux/input.h>
#include <linux/usb.h>
@@ -516,19 +517,19 @@
if (retval) {
ictx->tx.busy = false;
smp_rmb(); /* ensure later readers know we're not busy */
- pr_err("error submitting urb(%d)\n", retval);
+ pr_err_ratelimited("error submitting urb(%d)\n", retval);
} else {
/* Wait for transmission to complete (or abort) */
mutex_unlock(&ictx->lock);
retval = wait_for_completion_interruptible(
&ictx->tx.finished);
if (retval)
- pr_err("task interrupted\n");
+ pr_err_ratelimited("task interrupted\n");
mutex_lock(&ictx->lock);
retval = ictx->tx.status;
if (retval)
- pr_err("packet tx failed (%d)\n", retval);
+ pr_err_ratelimited("packet tx failed (%d)\n", retval);
}
kfree(control_req);
@@ -830,20 +831,20 @@
ictx = file->private_data;
if (!ictx) {
- pr_err("no context for device\n");
+ pr_err_ratelimited("no context for device\n");
return -ENODEV;
}
mutex_lock(&ictx->lock);
if (!ictx->dev_present_intf0) {
- pr_err("no iMON device present\n");
+ pr_err_ratelimited("no iMON device present\n");
retval = -ENODEV;
goto exit;
}
if (n_bytes <= 0 || n_bytes > 32) {
- pr_err("invalid payload size\n");
+ pr_err_ratelimited("invalid payload size\n");
retval = -EINVAL;
goto exit;
}
@@ -869,7 +870,7 @@
retval = send_packet(ictx);
if (retval) {
- pr_err("send packet failed for packet #%d\n", seq / 2);
+ pr_err_ratelimited("send packet #%d failed\n", seq / 2);
goto exit;
} else {
seq += 2;
@@ -883,7 +884,7 @@
ictx->usb_tx_buf[7] = (unsigned char) seq;
retval = send_packet(ictx);
if (retval)
- pr_err("send packet failed for packet #%d\n", seq / 2);
+ pr_err_ratelimited("send packet #%d failed\n", seq / 2);
exit:
mutex_unlock(&ictx->lock);
@@ -912,20 +913,21 @@
ictx = file->private_data;
if (!ictx) {
- pr_err("no context for device\n");
+ pr_err_ratelimited("no context for device\n");
return -ENODEV;
}
mutex_lock(&ictx->lock);
if (!ictx->display_supported) {
- pr_err("no iMON display present\n");
+ pr_err_ratelimited("no iMON display present\n");
retval = -ENODEV;
goto exit;
}
if (n_bytes != 8) {
- pr_err("invalid payload size: %d (expected 8)\n", (int)n_bytes);
+ pr_err_ratelimited("invalid payload size: %d (expected 8)\n",
+ (int)n_bytes);
retval = -EINVAL;
goto exit;
}
@@ -937,7 +939,7 @@
retval = send_packet(ictx);
if (retval) {
- pr_err("send packet failed!\n");
+ pr_err_ratelimited("send packet failed!\n");
goto exit;
} else {
dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n",
@@ -1656,7 +1658,7 @@
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx)
+ if (!ictx || !ictx->dev_present_intf0)
return;
switch (urb->status) {
@@ -1688,7 +1690,7 @@
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx)
+ if (!ictx || !ictx->dev_present_intf1)
return;
switch (urb->status) {
@@ -2116,7 +2118,6 @@
ictx->dev = dev;
ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf0 = true;
ictx->rx_urb_intf0 = rx_urb;
ictx->tx_urb = tx_urb;
ictx->rf_device = false;
@@ -2155,6 +2156,8 @@
goto rdev_setup_failed;
}
+ ictx->dev_present_intf0 = true;
+
mutex_unlock(&ictx->lock);
return ictx;
@@ -2198,7 +2201,6 @@
}
ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf1 = true;
ictx->rx_urb_intf1 = rx_urb;
ret = -ENODEV;
@@ -2227,6 +2229,8 @@
goto urb_submit_failed;
}
+ ictx->dev_present_intf1 = true;
+
mutex_unlock(&ictx->lock);
return ictx;
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index e5eeec4..ec2e67f 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -98,7 +98,7 @@
return 0;
}
-static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
+static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
size_t n, loff_t *ppos)
{
struct lirc_codec *lirc;
@@ -140,10 +140,11 @@
}
static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
- unsigned long __user arg)
+ unsigned long arg)
{
struct lirc_codec *lirc;
struct rc_dev *dev;
+ u32 __user *argp = (u32 __user *)(arg);
int ret = 0;
__u32 val = 0, tmp;
@@ -156,7 +157,7 @@
return -EFAULT;
if (_IOC_DIR(cmd) & _IOC_WRITE) {
- ret = get_user(val, (__u32 *)arg);
+ ret = get_user(val, argp);
if (ret)
return ret;
}
@@ -265,7 +266,7 @@
}
if (_IOC_DIR(cmd) & _IOC_READ)
- ret = put_user(val, (__u32 *)arg);
+ ret = put_user(val, argp);
return ret;
}
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index b57fc83..36e4d5e 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -4,6 +4,7 @@
rc-apac-viewcomp.o \
rc-asus-pc39.o \
rc-ati-tv-wonder-hd-600.o \
+ rc-ati-x10.o \
rc-avermedia-a16d.o \
rc-avermedia.o \
rc-avermedia-cardbus.o \
@@ -47,6 +48,7 @@
rc-lirc.o \
rc-lme2510.o \
rc-manli.o \
+ rc-medion-x10.o \
rc-msi-digivox-ii.o \
rc-msi-digivox-iii.o \
rc-msi-tvanywhere.o \
@@ -70,6 +72,7 @@
rc-hauppauge.o \
rc-rc6-mce.o \
rc-real-audio-220-32-keys.o \
+ rc-snapstream-firefly.o \
rc-streamzap.o \
rc-tbs-nec.o \
rc-technisat-usb2.o \
diff --git a/drivers/media/rc/keymaps/rc-ati-x10.c b/drivers/media/rc/keymaps/rc-ati-x10.c
new file mode 100644
index 0000000..e1b8b26
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-ati-x10.c
@@ -0,0 +1,104 @@
+/*
+ * ATI X10 RF remote keytable
+ *
+ * Copyright (C) 2011 Anssi Hannula <anssi.hannula@?ki.fi>
+ *
+ * This file is based on the static generic keytable previously found in
+ * ati_remote.c, which is
+ * Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
+ * Copyright (c) 2002 Vladimir Dergachev
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <media/rc-map.h>
+
+static struct rc_map_table ati_x10[] = {
+ { 0xd20d, KEY_1 },
+ { 0xd30e, KEY_2 },
+ { 0xd40f, KEY_3 },
+ { 0xd510, KEY_4 },
+ { 0xd611, KEY_5 },
+ { 0xd712, KEY_6 },
+ { 0xd813, KEY_7 },
+ { 0xd914, KEY_8 },
+ { 0xda15, KEY_9 },
+ { 0xdc17, KEY_0 },
+ { 0xc500, KEY_A },
+ { 0xc601, KEY_B },
+ { 0xde19, KEY_C },
+ { 0xe01b, KEY_D },
+ { 0xe621, KEY_E },
+ { 0xe823, KEY_F },
+
+ { 0xdd18, KEY_KPENTER }, /* "check" */
+ { 0xdb16, KEY_MENU }, /* "menu" */
+ { 0xc702, KEY_POWER }, /* Power */
+ { 0xc803, KEY_TV }, /* TV */
+ { 0xc904, KEY_DVD }, /* DVD */
+ { 0xca05, KEY_WWW }, /* WEB */
+ { 0xcb06, KEY_BOOKMARKS }, /* "book" */
+ { 0xcc07, KEY_EDIT }, /* "hand" */
+ { 0xe11c, KEY_COFFEE }, /* "timer" */
+ { 0xe520, KEY_FRONT }, /* "max" */
+ { 0xe21d, KEY_LEFT }, /* left */
+ { 0xe41f, KEY_RIGHT }, /* right */
+ { 0xe722, KEY_DOWN }, /* down */
+ { 0xdf1a, KEY_UP }, /* up */
+ { 0xe31e, KEY_OK }, /* "OK" */
+ { 0xce09, KEY_VOLUMEDOWN }, /* VOL + */
+ { 0xcd08, KEY_VOLUMEUP }, /* VOL - */
+ { 0xcf0a, KEY_MUTE }, /* MUTE */
+ { 0xd00b, KEY_CHANNELUP }, /* CH + */
+ { 0xd10c, KEY_CHANNELDOWN },/* CH - */
+ { 0xec27, KEY_RECORD }, /* ( o) red */
+ { 0xea25, KEY_PLAY }, /* ( >) */
+ { 0xe924, KEY_REWIND }, /* (<<) */
+ { 0xeb26, KEY_FORWARD }, /* (>>) */
+ { 0xed28, KEY_STOP }, /* ([]) */
+ { 0xee29, KEY_PAUSE }, /* ('') */
+ { 0xf02b, KEY_PREVIOUS }, /* (<-) */
+ { 0xef2a, KEY_NEXT }, /* (>+) */
+ { 0xf22d, KEY_INFO }, /* PLAYING */
+ { 0xf32e, KEY_HOME }, /* TOP */
+ { 0xf42f, KEY_END }, /* END */
+ { 0xf530, KEY_SELECT }, /* SELECT */
+};
+
+static struct rc_map_list ati_x10_map = {
+ .map = {
+ .scan = ati_x10,
+ .size = ARRAY_SIZE(ati_x10),
+ .rc_type = RC_TYPE_OTHER,
+ .name = RC_MAP_ATI_X10,
+ }
+};
+
+static int __init init_rc_map_ati_x10(void)
+{
+ return rc_map_register(&ati_x10_map);
+}
+
+static void __exit exit_rc_map_ati_x10(void)
+{
+ rc_map_unregister(&ati_x10_map);
+}
+
+module_init(init_rc_map_ati_x10)
+module_exit(exit_rc_map_ati_x10)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-medion-x10.c b/drivers/media/rc/keymaps/rc-medion-x10.c
new file mode 100644
index 0000000..09e2cc0
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-medion-x10.c
@@ -0,0 +1,117 @@
+/*
+ * Medion X10 RF remote keytable
+ *
+ * Copyright (C) 2011 Anssi Hannula <anssi.hannula@?ki.fi>
+ *
+ * This file is based on a keytable provided by
+ * Jan Losinski <losinski@wh2.tu-dresden.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <media/rc-map.h>
+
+static struct rc_map_table medion_x10[] = {
+ { 0xf12c, KEY_TV }, /* TV */
+ { 0xf22d, KEY_VCR }, /* VCR */
+ { 0xc904, KEY_DVD }, /* DVD */
+ { 0xcb06, KEY_AUDIO }, /* MUSIC */
+
+ { 0xf32e, KEY_RADIO }, /* RADIO */
+ { 0xca05, KEY_DIRECTORY }, /* PHOTO */
+ { 0xf42f, KEY_INFO }, /* TV-PREVIEW */
+ { 0xf530, KEY_LIST }, /* CHANNEL-LST */
+
+ { 0xe01b, KEY_SETUP }, /* SETUP */
+ { 0xf631, KEY_VIDEO }, /* VIDEO DESKTOP */
+
+ { 0xcd08, KEY_VOLUMEDOWN }, /* VOL - */
+ { 0xce09, KEY_VOLUMEUP }, /* VOL + */
+ { 0xd00b, KEY_CHANNELUP }, /* CHAN + */
+ { 0xd10c, KEY_CHANNELDOWN }, /* CHAN - */
+ { 0xc500, KEY_MUTE }, /* MUTE */
+
+ { 0xf732, KEY_RED }, /* red */
+ { 0xf833, KEY_GREEN }, /* green */
+ { 0xf934, KEY_YELLOW }, /* yellow */
+ { 0xfa35, KEY_BLUE }, /* blue */
+ { 0xdb16, KEY_TEXT }, /* TXT */
+
+ { 0xd20d, KEY_1 },
+ { 0xd30e, KEY_2 },
+ { 0xd40f, KEY_3 },
+ { 0xd510, KEY_4 },
+ { 0xd611, KEY_5 },
+ { 0xd712, KEY_6 },
+ { 0xd813, KEY_7 },
+ { 0xd914, KEY_8 },
+ { 0xda15, KEY_9 },
+ { 0xdc17, KEY_0 },
+ { 0xe11c, KEY_SEARCH }, /* TV/RAD, CH SRC */
+ { 0xe520, KEY_DELETE }, /* DELETE */
+
+ { 0xfb36, KEY_KEYBOARD }, /* RENAME */
+ { 0xdd18, KEY_SCREEN }, /* SNAPSHOT */
+
+ { 0xdf1a, KEY_UP }, /* up */
+ { 0xe722, KEY_DOWN }, /* down */
+ { 0xe21d, KEY_LEFT }, /* left */
+ { 0xe41f, KEY_RIGHT }, /* right */
+ { 0xe31e, KEY_OK }, /* OK */
+
+ { 0xfc37, KEY_SELECT }, /* ACQUIRE IMAGE */
+ { 0xfd38, KEY_EDIT }, /* EDIT IMAGE */
+
+ { 0xe924, KEY_REWIND }, /* rewind (<<) */
+ { 0xea25, KEY_PLAY }, /* play ( >) */
+ { 0xeb26, KEY_FORWARD }, /* forward (>>) */
+ { 0xec27, KEY_RECORD }, /* record ( o) */
+ { 0xed28, KEY_STOP }, /* stop ([]) */
+ { 0xee29, KEY_PAUSE }, /* pause ('') */
+
+ { 0xe621, KEY_PREVIOUS }, /* prev */
+ { 0xfe39, KEY_SWITCHVIDEOMODE }, /* F SCR */
+ { 0xe823, KEY_NEXT }, /* next */
+ { 0xde19, KEY_MENU }, /* MENU */
+ { 0xff3a, KEY_LANGUAGE }, /* AUDIO */
+
+ { 0xc702, KEY_POWER }, /* POWER */
+};
+
+static struct rc_map_list medion_x10_map = {
+ .map = {
+ .scan = medion_x10,
+ .size = ARRAY_SIZE(medion_x10),
+ .rc_type = RC_TYPE_OTHER,
+ .name = RC_MAP_MEDION_X10,
+ }
+};
+
+static int __init init_rc_map_medion_x10(void)
+{
+ return rc_map_register(&medion_x10_map);
+}
+
+static void __exit exit_rc_map_medion_x10(void)
+{
+ rc_map_unregister(&medion_x10_map);
+}
+
+module_init(init_rc_map_medion_x10)
+module_exit(exit_rc_map_medion_x10)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index 8d558ae..31fc64cd 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -20,6 +20,7 @@
{ 0x0701, KEY_MENU }, /* Pinnacle logo */
{ 0x0739, KEY_POWER },
{ 0x0703, KEY_VOLUMEUP },
+ { 0x0705, KEY_OK },
{ 0x0709, KEY_VOLUMEDOWN },
{ 0x0706, KEY_CHANNELUP },
{ 0x070c, KEY_CHANNELDOWN },
diff --git a/drivers/media/rc/keymaps/rc-snapstream-firefly.c b/drivers/media/rc/keymaps/rc-snapstream-firefly.c
new file mode 100644
index 0000000..ef14652
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-snapstream-firefly.c
@@ -0,0 +1,107 @@
+/*
+ * SnapStream Firefly X10 RF remote keytable
+ *
+ * Copyright (C) 2011 Anssi Hannula <anssi.hannula@?ki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <media/rc-map.h>
+
+static struct rc_map_table snapstream_firefly[] = {
+ { 0xf12c, KEY_ZOOM }, /* Maximize */
+ { 0xc702, KEY_CLOSE },
+
+ { 0xd20d, KEY_1 },
+ { 0xd30e, KEY_2 },
+ { 0xd40f, KEY_3 },
+ { 0xd510, KEY_4 },
+ { 0xd611, KEY_5 },
+ { 0xd712, KEY_6 },
+ { 0xd813, KEY_7 },
+ { 0xd914, KEY_8 },
+ { 0xda15, KEY_9 },
+ { 0xdc17, KEY_0 },
+ { 0xdb16, KEY_BACK },
+ { 0xdd18, KEY_KPENTER }, /* ent */
+
+ { 0xce09, KEY_VOLUMEUP },
+ { 0xcd08, KEY_VOLUMEDOWN },
+ { 0xcf0a, KEY_MUTE },
+ { 0xd00b, KEY_CHANNELUP },
+ { 0xd10c, KEY_CHANNELDOWN },
+ { 0xc500, KEY_VENDOR }, /* firefly */
+
+ { 0xf32e, KEY_INFO },
+ { 0xf42f, KEY_OPTION },
+
+ { 0xe21d, KEY_LEFT },
+ { 0xe41f, KEY_RIGHT },
+ { 0xe722, KEY_DOWN },
+ { 0xdf1a, KEY_UP },
+ { 0xe31e, KEY_OK },
+
+ { 0xe11c, KEY_MENU },
+ { 0xe520, KEY_EXIT },
+
+ { 0xec27, KEY_RECORD },
+ { 0xea25, KEY_PLAY },
+ { 0xed28, KEY_STOP },
+ { 0xe924, KEY_REWIND },
+ { 0xeb26, KEY_FORWARD },
+ { 0xee29, KEY_PAUSE },
+ { 0xf02b, KEY_PREVIOUS },
+ { 0xef2a, KEY_NEXT },
+
+ { 0xcb06, KEY_AUDIO }, /* Music */
+ { 0xca05, KEY_IMAGES }, /* Photos */
+ { 0xc904, KEY_DVD },
+ { 0xc803, KEY_TV },
+ { 0xcc07, KEY_VIDEO },
+
+ { 0xc601, KEY_HELP },
+ { 0xf22d, KEY_MODE }, /* Mouse */
+
+ { 0xde19, KEY_A },
+ { 0xe01b, KEY_B },
+ { 0xe621, KEY_C },
+ { 0xe823, KEY_D },
+};
+
+static struct rc_map_list snapstream_firefly_map = {
+ .map = {
+ .scan = snapstream_firefly,
+ .size = ARRAY_SIZE(snapstream_firefly),
+ .rc_type = RC_TYPE_OTHER,
+ .name = RC_MAP_SNAPSTREAM_FIREFLY,
+ }
+};
+
+static int __init init_rc_map_snapstream_firefly(void)
+{
+ return rc_map_register(&snapstream_firefly_map);
+}
+
+static void __exit exit_rc_map_snapstream_firefly(void)
+{
+ rc_map_unregister(&snapstream_firefly_map);
+}
+
+module_init(init_rc_map_snapstream_firefly)
+module_exit(exit_rc_map_snapstream_firefly)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 85ff9a1..60d3c1e 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1,7 +1,7 @@
/*
* Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
*
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ * Copyright (c) 2010-2011, Jarod Wilson <jarod@redhat.com>
*
* Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
* Conti, Martin Blatter and Daniel Melander, the latter of which was
@@ -15,6 +15,11 @@
* Jon Smirl, which included enhancements and simplifications to the
* incoming IR buffer parsing routines.
*
+ * Updated in July of 2011 with the aid of Microsoft's official
+ * remote/transceiver requirements and specification document, found at
+ * download.microsoft.com, title
+ * Windows-Media-Center-RC-IR-Collection-Green-Button-Specification-03-08-2011-V2.pdf
+ *
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -37,10 +42,11 @@
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
+#include <linux/pm_wakeup.h>
#include <media/rc-core.h>
-#define DRIVER_VERSION "1.91"
-#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
+#define DRIVER_VERSION "1.92"
+#define DRIVER_AUTHOR "Jarod Wilson <jarod@redhat.com>"
#define DRIVER_DESC "Windows Media Center Ed. eHome Infrared Transceiver " \
"device driver"
#define DRIVER_NAME "mceusb"
@@ -63,43 +69,90 @@
#define MCE_PULSE_MASK 0x7f /* Pulse mask */
#define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */
-#define MCE_HW_CMD_HEADER 0xff /* MCE hardware command header */
-#define MCE_COMMAND_HEADER 0x9f /* MCE command header */
-#define MCE_COMMAND_MASK 0xe0 /* Mask out command bits */
-#define MCE_COMMAND_NULL 0x00 /* These show up various places... */
-/* if buf[i] & MCE_COMMAND_MASK == 0x80 and buf[i] != MCE_COMMAND_HEADER,
- * then we're looking at a raw IR data sample */
-#define MCE_COMMAND_IRDATA 0x80
-#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
+/*
+ * The interface between the host and the IR hardware is command-response
+ * based. All commands and responses have a consistent format, where a lead
+ * byte always identifies the type of data following it. The lead byte has
+ * a port value in the 3 highest bits and a length value in the 5 lowest
+ * bits.
+ *
+ * The length field is overloaded, with a value of 11111 indicating that the
+ * following byte is a command or response code, and the length of the entire
+ * message is determined by the code. If the length field is not 11111, then
+ * it specifies the number of bytes of port data that follow.
+ */
+#define MCE_CMD 0x1f
+#define MCE_PORT_IR 0x4 /* (0x4 << 5) | MCE_CMD = 0x9f */
+#define MCE_PORT_SYS 0x7 /* (0x7 << 5) | MCE_CMD = 0xff */
+#define MCE_PORT_SER 0x6 /* 0xc0 thru 0xdf flush & 0x1f bytes */
+#define MCE_PORT_MASK 0xe0 /* Mask out command bits */
-/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
+/* Command port headers */
+#define MCE_CMD_PORT_IR 0x9f /* IR-related cmd/rsp */
+#define MCE_CMD_PORT_SYS 0xff /* System (non-IR) device cmd/rsp */
+
+/* Commands that set device state (2-4 bytes in length) */
+#define MCE_CMD_RESET 0xfe /* Reset device, 2 bytes */
+#define MCE_CMD_RESUME 0xaa /* Resume device after error, 2 bytes */
+#define MCE_CMD_SETIRCFS 0x06 /* Set tx carrier, 4 bytes */
+#define MCE_CMD_SETIRTIMEOUT 0x0c /* Set timeout, 4 bytes */
+#define MCE_CMD_SETIRTXPORTS 0x08 /* Set tx ports, 3 bytes */
+#define MCE_CMD_SETIRRXPORTEN 0x14 /* Set rx ports, 3 bytes */
+#define MCE_CMD_FLASHLED 0x23 /* Flash receiver LED, 2 bytes */
+
+/* Commands that query device state (all 2 bytes, unless noted) */
+#define MCE_CMD_GETIRCFS 0x07 /* Get carrier */
+#define MCE_CMD_GETIRTIMEOUT 0x0d /* Get timeout */
+#define MCE_CMD_GETIRTXPORTS 0x13 /* Get tx ports */
+#define MCE_CMD_GETIRRXPORTEN 0x15 /* Get rx ports */
+#define MCE_CMD_GETPORTSTATUS 0x11 /* Get tx port status, 3 bytes */
+#define MCE_CMD_GETIRNUMPORTS 0x16 /* Get number of ports */
+#define MCE_CMD_GETWAKESOURCE 0x17 /* Get wake source */
+#define MCE_CMD_GETEMVER 0x22 /* Get emulator interface version */
+#define MCE_CMD_GETDEVDETAILS 0x21 /* Get device details (em ver2 only) */
+#define MCE_CMD_GETWAKESUPPORT 0x20 /* Get wake details (em ver2 only) */
+#define MCE_CMD_GETWAKEVERSION 0x18 /* Get wake pattern (em ver2 only) */
+
+/* Misc commands */
+#define MCE_CMD_NOP 0xff /* No operation */
+
+/* Responses to commands (non-error cases) */
+#define MCE_RSP_EQIRCFS 0x06 /* tx carrier, 4 bytes */
+#define MCE_RSP_EQIRTIMEOUT 0x0c /* rx timeout, 4 bytes */
+#define MCE_RSP_GETWAKESOURCE 0x17 /* wake source, 3 bytes */
+#define MCE_RSP_EQIRTXPORTS 0x08 /* tx port mask, 3 bytes */
+#define MCE_RSP_EQIRRXPORTEN 0x14 /* rx port mask, 3 bytes */
+#define MCE_RSP_GETPORTSTATUS 0x11 /* tx port status, 7 bytes */
+#define MCE_RSP_EQIRRXCFCNT 0x15 /* rx carrier count, 4 bytes */
+#define MCE_RSP_EQIRNUMPORTS 0x16 /* number of ports, 4 bytes */
+#define MCE_RSP_EQWAKESUPPORT 0x20 /* wake capabilities, 3 bytes */
+#define MCE_RSP_EQWAKEVERSION 0x18 /* wake pattern details, 6 bytes */
+#define MCE_RSP_EQDEVDETAILS 0x21 /* device capabilities, 3 bytes */
+#define MCE_RSP_EQEMVER 0x22 /* emulator interface ver, 3 bytes */
+#define MCE_RSP_FLASHLED 0x23 /* success flashing LED, 2 bytes */
+
+/* Responses to error cases, must send MCE_CMD_RESUME to clear them */
+#define MCE_RSP_CMD_ILLEGAL 0xfe /* illegal command for port, 2 bytes */
+#define MCE_RSP_TX_TIMEOUT 0x81 /* tx timed out, 2 bytes */
+
+/* Misc commands/responses not defined in the MCE remote/transceiver spec */
#define MCE_CMD_SIG_END 0x01 /* End of signal */
#define MCE_CMD_PING 0x03 /* Ping device */
#define MCE_CMD_UNKNOWN 0x04 /* Unknown */
#define MCE_CMD_UNKNOWN2 0x05 /* Unknown */
-#define MCE_CMD_S_CARRIER 0x06 /* Set TX carrier frequency */
-#define MCE_CMD_G_CARRIER 0x07 /* Get TX carrier frequency */
-#define MCE_CMD_S_TXMASK 0x08 /* Set TX port bitmask */
#define MCE_CMD_UNKNOWN3 0x09 /* Unknown */
#define MCE_CMD_UNKNOWN4 0x0a /* Unknown */
#define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */
-#define MCE_CMD_S_TIMEOUT 0x0c /* Set RX timeout value */
-#define MCE_CMD_G_TIMEOUT 0x0d /* Get RX timeout value */
#define MCE_CMD_UNKNOWN5 0x0e /* Unknown */
#define MCE_CMD_UNKNOWN6 0x0f /* Unknown */
-#define MCE_CMD_G_RXPORTSTS 0x11 /* Get RX port status */
-#define MCE_CMD_G_TXMASK 0x13 /* Set TX port bitmask */
-#define MCE_CMD_S_RXSENSOR 0x14 /* Set RX sensor (std/learning) */
-#define MCE_CMD_G_RXSENSOR 0x15 /* Get RX sensor (std/learning) */
-#define MCE_RSP_PULSE_COUNT 0x15 /* RX pulse count (only if learning) */
-#define MCE_CMD_TX_PORTS 0x16 /* Get number of TX ports */
-#define MCE_CMD_G_WAKESRC 0x17 /* Get wake source */
-#define MCE_CMD_UNKNOWN7 0x18 /* Unknown */
#define MCE_CMD_UNKNOWN8 0x19 /* Unknown */
#define MCE_CMD_UNKNOWN9 0x1b /* Unknown */
-#define MCE_CMD_DEVICE_RESET 0xaa /* Reset the hardware */
-#define MCE_RSP_CMD_INVALID 0xfe /* Invalid command issued */
+#define MCE_CMD_NULL 0x00 /* These show up various places... */
+/* if buf[i] & MCE_PORT_MASK == 0x80 and buf[i] != MCE_CMD_PORT_IR,
+ * then we're looking at a raw IR data sample */
+#define MCE_COMMAND_IRDATA 0x80
+#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
/* module parameters */
#ifdef CONFIG_USB_DEBUG
@@ -388,48 +441,37 @@
char name[128];
char phys[64];
enum mceusb_model_type model;
+
+ bool need_reset; /* flag to issue a device resume cmd */
+ u8 emver; /* emulator interface version */
+ u8 num_txports; /* number of transmit ports */
+ u8 num_rxports; /* number of receive sensors */
+ u8 txports_cabled; /* bitmask of transmitters with cable */
+ u8 rxports_active; /* bitmask of active receive sensors */
};
-/*
- * MCE Device Command Strings
- * Device command responses vary from device to device...
- * - DEVICE_RESET resets the hardware to its default state
- * - GET_REVISION fetches the hardware/software revision, common
- * replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
- * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
- * device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
- * meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
- * ((clk / frequency) - 1)
- * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
- * response in the form of 9f 0c msb lsb
- * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
- * the form of 9f 08 bm, where bm is the bitmask
- * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
- * general use one or short-range learning one, in the form of
- * 9f 14 ss, where ss is either 01 for long-range or 02 for short
- * - SET_CARRIER_FREQ sets a new carrier mode and frequency
- * - SET_TX_BITMASK sets the transmitter bitmask
- * - SET_RX_TIMEOUT sets the receiver timeout
- * - SET_RX_SENSOR sets which receiver sensor to use
- */
-static char DEVICE_RESET[] = {MCE_COMMAND_NULL, MCE_HW_CMD_HEADER,
- MCE_CMD_DEVICE_RESET};
-static char GET_REVISION[] = {MCE_HW_CMD_HEADER, MCE_CMD_G_REVISION};
-static char GET_UNKNOWN[] = {MCE_HW_CMD_HEADER, MCE_CMD_UNKNOWN7};
-static char GET_UNKNOWN2[] = {MCE_COMMAND_HEADER, MCE_CMD_UNKNOWN2};
-static char GET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER, MCE_CMD_G_CARRIER};
-static char GET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TIMEOUT};
-static char GET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TXMASK};
-static char GET_RX_SENSOR[] = {MCE_COMMAND_HEADER, MCE_CMD_G_RXSENSOR};
+/* MCE Device Command Strings, generally a port and command pair */
+static char DEVICE_RESUME[] = {MCE_CMD_NULL, MCE_CMD_PORT_SYS,
+ MCE_CMD_RESUME};
+static char GET_REVISION[] = {MCE_CMD_PORT_SYS, MCE_CMD_G_REVISION};
+static char GET_EMVER[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETEMVER};
+static char GET_WAKEVERSION[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETWAKEVERSION};
+static char FLASH_LED[] = {MCE_CMD_PORT_SYS, MCE_CMD_FLASHLED};
+static char GET_UNKNOWN2[] = {MCE_CMD_PORT_IR, MCE_CMD_UNKNOWN2};
+static char GET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRCFS};
+static char GET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTIMEOUT};
+static char GET_NUM_PORTS[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRNUMPORTS};
+static char GET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTXPORTS};
+static char GET_RX_SENSOR[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRRXPORTEN};
/* sub in desired values in lower byte or bytes for full command */
/* FIXME: make use of these for transmit.
-static char SET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER,
- MCE_CMD_S_CARRIER, 0x00, 0x00};
-static char SET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_S_TXMASK, 0x00};
-static char SET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER,
- MCE_CMD_S_TIMEOUT, 0x00, 0x00};
-static char SET_RX_SENSOR[] = {MCE_COMMAND_HEADER,
- MCE_CMD_S_RXSENSOR, 0x00};
+static char SET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR,
+ MCE_CMD_SETIRCFS, 0x00, 0x00};
+static char SET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_SETIRTXPORTS, 0x00};
+static char SET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR,
+ MCE_CMD_SETIRTIMEOUT, 0x00, 0x00};
+static char SET_RX_SENSOR[] = {MCE_CMD_PORT_IR,
+ MCE_RSP_EQIRRXPORTEN, 0x00};
*/
static int mceusb_cmdsize(u8 cmd, u8 subcmd)
@@ -437,27 +479,33 @@
int datasize = 0;
switch (cmd) {
- case MCE_COMMAND_NULL:
- if (subcmd == MCE_HW_CMD_HEADER)
+ case MCE_CMD_NULL:
+ if (subcmd == MCE_CMD_PORT_SYS)
datasize = 1;
break;
- case MCE_HW_CMD_HEADER:
+ case MCE_CMD_PORT_SYS:
switch (subcmd) {
+ case MCE_RSP_EQWAKEVERSION:
+ datasize = 4;
+ break;
case MCE_CMD_G_REVISION:
datasize = 2;
break;
+ case MCE_RSP_EQWAKESUPPORT:
+ datasize = 1;
+ break;
}
- case MCE_COMMAND_HEADER:
+ case MCE_CMD_PORT_IR:
switch (subcmd) {
case MCE_CMD_UNKNOWN:
- case MCE_CMD_S_CARRIER:
- case MCE_CMD_S_TIMEOUT:
- case MCE_RSP_PULSE_COUNT:
+ case MCE_RSP_EQIRCFS:
+ case MCE_RSP_EQIRTIMEOUT:
+ case MCE_RSP_EQIRRXCFCNT:
datasize = 2;
break;
case MCE_CMD_SIG_END:
- case MCE_CMD_S_TXMASK:
- case MCE_CMD_S_RXSENSOR:
+ case MCE_RSP_EQIRTXPORTS:
+ case MCE_RSP_EQIRRXPORTEN:
datasize = 1;
break;
}
@@ -470,9 +518,10 @@
{
char codes[USB_BUFLEN * 3 + 1];
char inout[9];
- u8 cmd, subcmd, data1, data2;
+ u8 cmd, subcmd, data1, data2, data3, data4, data5;
struct device *dev = ir->dev;
int i, start, skip = 0;
+ u32 carrier, period;
if (!debug)
return;
@@ -500,18 +549,28 @@
subcmd = buf[start + 1] & 0xff;
data1 = buf[start + 2] & 0xff;
data2 = buf[start + 3] & 0xff;
+ data3 = buf[start + 4] & 0xff;
+ data4 = buf[start + 5] & 0xff;
+ data5 = buf[start + 6] & 0xff;
switch (cmd) {
- case MCE_COMMAND_NULL:
- if ((subcmd == MCE_HW_CMD_HEADER) &&
- (data1 == MCE_CMD_DEVICE_RESET))
- dev_info(dev, "Device reset requested\n");
+ case MCE_CMD_NULL:
+ if (subcmd == MCE_CMD_NULL)
+ break;
+ if ((subcmd == MCE_CMD_PORT_SYS) &&
+ (data1 == MCE_CMD_RESUME))
+ dev_info(dev, "Device resume requested\n");
else
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
break;
- case MCE_HW_CMD_HEADER:
+ case MCE_CMD_PORT_SYS:
switch (subcmd) {
+ case MCE_RSP_EQEMVER:
+ if (!out)
+ dev_info(dev, "Emulator interface version %x\n",
+ data1);
+ break;
case MCE_CMD_G_REVISION:
if (len == 2)
dev_info(dev, "Get hw/sw rev?\n");
@@ -520,21 +579,35 @@
"0x%02x 0x%02x\n", data1, data2,
buf[start + 4], buf[start + 5]);
break;
- case MCE_CMD_DEVICE_RESET:
- dev_info(dev, "Device reset requested\n");
+ case MCE_CMD_RESUME:
+ dev_info(dev, "Device resume requested\n");
break;
- case MCE_RSP_CMD_INVALID:
- dev_info(dev, "Previous command not supported\n");
+ case MCE_RSP_CMD_ILLEGAL:
+ dev_info(dev, "Illegal PORT_SYS command\n");
break;
- case MCE_CMD_UNKNOWN7:
- case MCE_CMD_UNKNOWN9:
+ case MCE_RSP_EQWAKEVERSION:
+ if (!out)
+ dev_info(dev, "Wake version, proto: 0x%02x, "
+ "payload: 0x%02x, address: 0x%02x, "
+ "version: 0x%02x\n",
+ data1, data2, data3, data4);
+ break;
+ case MCE_RSP_GETPORTSTATUS:
+ if (!out)
+ /* We use data1 + 1 here, to match hw labels */
+ dev_info(dev, "TX port %d: blaster is%s connected\n",
+ data1 + 1, data4 ? " not" : "");
+ break;
+ case MCE_CMD_FLASHLED:
+ dev_info(dev, "Attempting to flash LED\n");
+ break;
default:
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
break;
}
break;
- case MCE_COMMAND_HEADER:
+ case MCE_CMD_PORT_IR:
switch (subcmd) {
case MCE_CMD_SIG_END:
dev_info(dev, "End of signal\n");
@@ -546,47 +619,55 @@
dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
data1, data2);
break;
- case MCE_CMD_S_CARRIER:
- dev_info(dev, "%s carrier mode and freq of "
- "0x%02x 0x%02x\n", inout, data1, data2);
+ case MCE_RSP_EQIRCFS:
+ period = DIV_ROUND_CLOSEST(
+ (1 << data1 * 2) * (data2 + 1), 10);
+ if (!period)
+ break;
+ carrier = (1000 * 1000) / period;
+ dev_info(dev, "%s carrier of %u Hz (period %uus)\n",
+ inout, carrier, period);
break;
- case MCE_CMD_G_CARRIER:
+ case MCE_CMD_GETIRCFS:
dev_info(dev, "Get carrier mode and freq\n");
break;
- case MCE_CMD_S_TXMASK:
+ case MCE_RSP_EQIRTXPORTS:
dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
inout, data1);
break;
- case MCE_CMD_S_TIMEOUT:
+ case MCE_RSP_EQIRTIMEOUT:
/* value is in units of 50us, so x*50/1000 ms */
+ period = ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000;
dev_info(dev, "%s receive timeout of %d ms\n",
- inout,
- ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000);
+ inout, period);
break;
- case MCE_CMD_G_TIMEOUT:
+ case MCE_CMD_GETIRTIMEOUT:
dev_info(dev, "Get receive timeout\n");
break;
- case MCE_CMD_G_TXMASK:
+ case MCE_CMD_GETIRTXPORTS:
dev_info(dev, "Get transmit blaster mask\n");
break;
- case MCE_CMD_S_RXSENSOR:
+ case MCE_RSP_EQIRRXPORTEN:
dev_info(dev, "%s %s-range receive sensor in use\n",
inout, data1 == 0x02 ? "short" : "long");
break;
- case MCE_CMD_G_RXSENSOR:
- /* aka MCE_RSP_PULSE_COUNT */
+ case MCE_CMD_GETIRRXPORTEN:
+ /* aka MCE_RSP_EQIRRXCFCNT */
if (out)
dev_info(dev, "Get receive sensor\n");
else if (ir->learning_enabled)
dev_info(dev, "RX pulse count: %d\n",
((data1 << 8) | data2));
break;
- case MCE_RSP_CMD_INVALID:
- dev_info(dev, "Error! Hardware is likely wedged...\n");
+ case MCE_RSP_EQIRNUMPORTS:
+ if (out)
+ break;
+ dev_info(dev, "Num TX ports: %x, num RX ports: %x\n",
+ data1, data2);
break;
- case MCE_CMD_UNKNOWN2:
- case MCE_CMD_UNKNOWN3:
- case MCE_CMD_UNKNOWN5:
+ case MCE_RSP_CMD_ILLEGAL:
+ dev_info(dev, "Illegal PORT_IR command\n");
+ break;
default:
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
@@ -599,8 +680,8 @@
if (cmd == MCE_IRDATA_TRAILER)
dev_info(dev, "End of raw IR data\n");
- else if ((cmd != MCE_COMMAND_HEADER) &&
- ((cmd & MCE_COMMAND_MASK) == MCE_COMMAND_IRDATA))
+ else if ((cmd != MCE_CMD_PORT_IR) &&
+ ((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA))
dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem);
}
@@ -616,9 +697,6 @@
if (ir) {
len = urb->actual_length;
- mce_dbg(ir->dev, "callback called (status=%d len=%d)\n",
- urb->status, len);
-
mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
}
@@ -683,7 +761,16 @@
static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
{
+ int rsize = sizeof(DEVICE_RESUME);
+
+ if (ir->need_reset) {
+ ir->need_reset = false;
+ mce_request_packet(ir, DEVICE_RESUME, rsize, MCEUSB_TX);
+ msleep(10);
+ }
+
mce_request_packet(ir, data, size, MCEUSB_TX);
+ msleep(10);
}
static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
@@ -708,8 +795,8 @@
return -ENOMEM;
/* MCE tx init header */
- cmdbuf[cmdcount++] = MCE_COMMAND_HEADER;
- cmdbuf[cmdcount++] = MCE_CMD_S_TXMASK;
+ cmdbuf[cmdcount++] = MCE_CMD_PORT_IR;
+ cmdbuf[cmdcount++] = MCE_CMD_SETIRTXPORTS;
cmdbuf[cmdcount++] = ir->tx_mask;
/* Generate mce packet data */
@@ -795,8 +882,8 @@
struct mceusb_dev *ir = dev->priv;
int clk = 10000000;
int prescaler = 0, divisor = 0;
- unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
- MCE_CMD_S_CARRIER, 0x00, 0x00 };
+ unsigned char cmdbuf[4] = { MCE_CMD_PORT_IR,
+ MCE_CMD_SETIRCFS, 0x00, 0x00 };
/* Carrier has changed */
if (ir->carrier != carrier) {
@@ -844,17 +931,34 @@
u8 lo = ir->buf_in[index + 2] & 0xff;
switch (ir->buf_in[index]) {
+ /* the one and only 5-byte return value command */
+ case MCE_RSP_GETPORTSTATUS:
+ if ((ir->buf_in[index + 4] & 0xff) == 0x00)
+ ir->txports_cabled |= 1 << hi;
+ break;
+
/* 2-byte return value commands */
- case MCE_CMD_S_TIMEOUT:
+ case MCE_RSP_EQIRTIMEOUT:
ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
break;
+ case MCE_RSP_EQIRNUMPORTS:
+ ir->num_txports = hi;
+ ir->num_rxports = lo;
+ break;
/* 1-byte return value commands */
- case MCE_CMD_S_TXMASK:
+ case MCE_RSP_EQEMVER:
+ ir->emver = hi;
+ break;
+ case MCE_RSP_EQIRTXPORTS:
ir->tx_mask = hi;
break;
- case MCE_CMD_S_RXSENSOR:
- ir->learning_enabled = (hi == 0x02);
+ case MCE_RSP_EQIRRXPORTEN:
+ ir->learning_enabled = ((hi & 0x02) == 0x02);
+ ir->rxports_active = hi;
+ break;
+ case MCE_RSP_CMD_ILLEGAL:
+ ir->need_reset = true;
break;
default:
break;
@@ -903,8 +1007,8 @@
/* decode mce packets of the form (84),AA,BB,CC,DD */
/* IR data packets can span USB messages - rem */
ir->cmd = ir->buf_in[i];
- if ((ir->cmd == MCE_COMMAND_HEADER) ||
- ((ir->cmd & MCE_COMMAND_MASK) !=
+ if ((ir->cmd == MCE_CMD_PORT_IR) ||
+ ((ir->cmd & MCE_PORT_MASK) !=
MCE_COMMAND_IRDATA)) {
ir->parser_state = SUBCMD;
continue;
@@ -969,6 +1073,13 @@
usb_submit_urb(urb, GFP_ATOMIC);
}
+static void mceusb_get_emulator_version(struct mceusb_dev *ir)
+{
+ /* If we get no reply or an illegal command reply, its ver 1, says MS */
+ ir->emver = 1;
+ mce_async_out(ir, GET_EMVER, sizeof(GET_EMVER));
+}
+
static void mceusb_gen1_init(struct mceusb_dev *ir)
{
int ret;
@@ -1011,8 +1122,8 @@
0x0000, 0x0100, NULL, 0, HZ * 3);
mce_dbg(dev, "%s - retC = %d\n", __func__, ret);
- /* device reset */
- mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+ /* device resume */
+ mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
/* get hw/sw revision? */
mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
@@ -1022,23 +1133,36 @@
static void mceusb_gen2_init(struct mceusb_dev *ir)
{
- /* device reset */
- mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+ /* device resume */
+ mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
/* get hw/sw revision? */
mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
- /* unknown what the next two actually return... */
- mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
+ /* get wake version (protocol, key, address) */
+ mce_async_out(ir, GET_WAKEVERSION, sizeof(GET_WAKEVERSION));
+
+ /* unknown what this one actually returns... */
mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
}
static void mceusb_get_parameters(struct mceusb_dev *ir)
{
+ int i;
+ unsigned char cmdbuf[3] = { MCE_CMD_PORT_SYS,
+ MCE_CMD_GETPORTSTATUS, 0x00 };
+
+ /* defaults, if the hardware doesn't support querying */
+ ir->num_txports = 2;
+ ir->num_rxports = 2;
+
+ /* get number of tx and rx ports */
+ mce_async_out(ir, GET_NUM_PORTS, sizeof(GET_NUM_PORTS));
+
/* get the carrier and frequency */
mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
- if (!ir->flags.no_tx)
+ if (ir->num_txports && !ir->flags.no_tx)
/* get the transmitter bitmask */
mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
@@ -1047,6 +1171,19 @@
/* get receiver sensor setting */
mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
+
+ for (i = 0; i < ir->num_txports; i++) {
+ cmdbuf[2] = i;
+ mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+ }
+}
+
+static void mceusb_flash_led(struct mceusb_dev *ir)
+{
+ if (ir->emver < 2)
+ return;
+
+ mce_async_out(ir, FLASH_LED, sizeof(FLASH_LED));
}
static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
@@ -1220,6 +1357,9 @@
mce_dbg(&intf->dev, "Flushing receive buffers\n");
mce_flush_rx_buffer(ir, maxp);
+ /* figure out which firmware/emulator version this hardware has */
+ mceusb_get_emulator_version(ir);
+
/* initialize device */
if (ir->flags.microsoft_gen1)
mceusb_gen1_init(ir);
@@ -1228,13 +1368,23 @@
mceusb_get_parameters(ir);
+ mceusb_flash_led(ir);
+
if (!ir->flags.no_tx)
mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK);
usb_set_intfdata(intf, ir);
- dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name,
- dev->bus->busnum, dev->devnum);
+ /* enable wake via this device */
+ device_set_wakeup_capable(ir->dev, true);
+ device_set_wakeup_enable(ir->dev, true);
+
+ dev_info(&intf->dev, "Registered %s with mce emulator interface "
+ "version %x\n", name, ir->emver);
+ dev_info(&intf->dev, "%x tx ports (0x%x cabled) and "
+ "%x rx sensors (0x%x active)\n",
+ ir->num_txports, ir->txports_cabled,
+ ir->num_rxports, ir->rxports_active);
return 0;
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 04c2c72..c6ca870 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -162,49 +162,49 @@
#ifdef CONFIG_IR_NEC_DECODER_MODULE
#define load_nec_decode() request_module("ir-nec-decoder")
#else
-#define load_nec_decode() 0
+static inline void load_nec_decode(void) { }
#endif
/* from ir-rc5-decoder.c */
#ifdef CONFIG_IR_RC5_DECODER_MODULE
#define load_rc5_decode() request_module("ir-rc5-decoder")
#else
-#define load_rc5_decode() 0
+static inline void load_rc5_decode(void) { }
#endif
/* from ir-rc6-decoder.c */
#ifdef CONFIG_IR_RC6_DECODER_MODULE
#define load_rc6_decode() request_module("ir-rc6-decoder")
#else
-#define load_rc6_decode() 0
+static inline void load_rc6_decode(void) { }
#endif
/* from ir-jvc-decoder.c */
#ifdef CONFIG_IR_JVC_DECODER_MODULE
#define load_jvc_decode() request_module("ir-jvc-decoder")
#else
-#define load_jvc_decode() 0
+static inline void load_jvc_decode(void) { }
#endif
/* from ir-sony-decoder.c */
#ifdef CONFIG_IR_SONY_DECODER_MODULE
#define load_sony_decode() request_module("ir-sony-decoder")
#else
-#define load_sony_decode() 0
+static inline void load_sony_decode(void) { }
#endif
/* from ir-mce_kbd-decoder.c */
#ifdef CONFIG_IR_MCE_KBD_DECODER_MODULE
#define load_mce_kbd_decode() request_module("ir-mce_kbd-decoder")
#else
-#define load_mce_kbd_decode() 0
+static inline void load_mce_kbd_decode(void) { }
#endif
/* from ir-lirc-codec.c */
#ifdef CONFIG_IR_LIRC_CODEC_MODULE
#define load_lirc_codec() request_module("ir-lirc-codec")
#else
-#define load_lirc_codec() 0
+static inline void load_lirc_codec(void) { }
#endif
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 51a23f4..666d4bb 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -928,10 +928,6 @@
static void rc_dev_release(struct device *device)
{
- struct rc_dev *dev = to_rc_dev(device);
-
- kfree(dev);
- module_put(THIS_MODULE);
}
#define ADD_HOTPLUG_VAR(fmt, val...) \
@@ -945,6 +941,9 @@
{
struct rc_dev *dev = to_rc_dev(device);
+ if (!dev || !dev->input_dev)
+ return -ENODEV;
+
if (dev->rc_map.name)
ADD_HOTPLUG_VAR("NAME=%s", dev->rc_map.name);
if (dev->driver_name)
@@ -1013,10 +1012,16 @@
void rc_free_device(struct rc_dev *dev)
{
- if (dev) {
+ if (!dev)
+ return;
+
+ if (dev->input_dev)
input_free_device(dev->input_dev);
- put_device(&dev->dev);
- }
+
+ put_device(&dev->dev);
+
+ kfree(dev);
+ module_put(THIS_MODULE);
}
EXPORT_SYMBOL_GPL(rc_free_device);
@@ -1143,14 +1148,18 @@
if (dev->driver_type == RC_DRIVER_IR_RAW)
ir_raw_event_unregister(dev);
- input_unregister_device(dev->input_dev);
- dev->input_dev = NULL;
-
+ /* Freeing the table should also call the stop callback */
ir_free_table(&dev->rc_map);
IR_dprintk(1, "Freed keycode table\n");
- device_unregister(&dev->dev);
+ input_unregister_device(dev->input_dev);
+ dev->input_dev = NULL;
+
+ device_del(&dev->dev);
+
+ rc_free_device(dev);
}
+
EXPORT_SYMBOL_GPL(rc_unregister_device);
/*
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index a166044..61287fc 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -195,11 +195,6 @@
dma_addr_t dma_in;
dma_addr_t dma_out;
- /* true if write urb is busy */
- bool write_busy;
- /* wait for the write to finish */
- struct completion write_finished;
-
/* locks this structure */
struct mutex lock;
@@ -207,8 +202,6 @@
struct timer_list rx_timeout;
u32 hw_timeout;
- /* Is the device currently receiving? */
- bool recv_in_progress;
/* is the detector enabled*/
bool det_enabled;
/* Is the device currently transmitting?*/
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index bec8abc..13f54b5 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -41,6 +41,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/pnp.h>
#include <linux/interrupt.h>
@@ -1155,12 +1157,12 @@
case IR_PROTOCOL_RC6:
break;
default:
- printk(KERN_ERR DRVNAME ": Invalid power-on protocol\n");
+ pr_err("Invalid power-on protocol\n");
}
ret = pnp_register_driver(&wbcir_driver);
if (ret)
- printk(KERN_ERR DRVNAME ": Unable to register driver\n");
+ pr_err("Unable to register driver\n");
return ret;
}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f574dc0..d285c8c 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -467,6 +467,20 @@
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_MT9P031
+ tristate "Aptina MT9P031 support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Aptina
+ (Micron) mt9p031 5 Mpixel camera.
+
+config VIDEO_MT9T001
+ tristate "Aptina MT9T001 support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Aptina
+ (Micron) mt0t001 3 Mpixel camera.
+
config VIDEO_MT9V011
tristate "Micron mt9v011 sensor support"
depends on I2C && VIDEO_V4L2
@@ -489,6 +503,20 @@
This is a driver for the Toshiba TCM825x VGA camera sensor.
It is used for example in Nokia N800.
+config VIDEO_SR030PC30
+ tristate "Siliconfile SR030PC30 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This driver supports SR030PC30 VGA camera from Siliconfile
+
+config VIDEO_NOON010PC30
+ tristate "Siliconfile NOON010PC30 sensor support"
+ depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This driver supports NOON010PC30 CIF camera from Siliconfile
+
+source "drivers/media/video/m5mols/Kconfig"
+
comment "Flash devices"
config VIDEO_ADP1653
@@ -737,12 +765,6 @@
To compile this driver as a module, choose M here: the
module will be called arv.
-config VIDEO_SR030PC30
- tristate "SR030PC30 VGA camera sensor support"
- depends on I2C && VIDEO_V4L2
- ---help---
- This driver supports SR030PC30 VGA camera from Siliconfile
-
config VIDEO_VIA_CAMERA
tristate "VIAFB camera controller support"
depends on FB_VIA
@@ -753,18 +775,9 @@
Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
with ov7670 sensors.
-config VIDEO_NOON010PC30
- tristate "NOON010PC30 CIF camera sensor support"
- depends on I2C && VIDEO_V4L2
- ---help---
- This driver supports NOON010PC30 CIF camera from Siliconfile
-
-source "drivers/media/video/m5mols/Kconfig"
-
config VIDEO_OMAP3
tristate "OMAP 3 Camera support (EXPERIMENTAL)"
- select OMAP_IOMMU
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
+ depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
---help---
Driver for an OMAP 3 camera controller.
@@ -949,8 +962,9 @@
Interface
config VIDEO_SAMSUNG_S5P_FIMC
- tristate "Samsung S5P and EXYNOS4 camera host interface driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+ tristate "Samsung S5P and EXYNOS4 camera interface driver (EXPERIMENTAL)"
+ depends on VIDEO_V4L2 && I2C && PLAT_S5P && PM_RUNTIME && \
+ VIDEO_V4L2_SUBDEV_API && EXPERIMENTAL
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
---help---
@@ -1004,6 +1018,8 @@
source "drivers/media/video/cx231xx/Kconfig"
+source "drivers/media/video/tm6000/Kconfig"
+
source "drivers/media/video/usbvision/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2723900..11fff97 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -65,6 +65,8 @@
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o
+obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o
obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
@@ -105,6 +107,7 @@
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
+obj-$(CONFIG_VIDEO_TM6000) += tm6000/
obj-$(CONFIG_VIDEO_MXB) += mxb.o
obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
@@ -190,6 +193,6 @@
obj-$(CONFIG_ARCH_OMAP) += omap/
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c
index be7befd..5914390 100644
--- a/drivers/media/video/adp1653.c
+++ b/drivers/media/video/adp1653.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/version.h>
#include <media/adp1653.h>
@@ -258,7 +259,7 @@
if (flash->ctrls.error)
return flash->ctrls.error;
- fault->is_volatile = 1;
+ fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
flash->subdev.ctrl_handler = &flash->ctrls;
return 0;
@@ -413,6 +414,10 @@
struct adp1653_flash *flash;
int ret;
+ /* we couldn't work without platform data */
+ if (client->dev.platform_data == NULL)
+ return -ENODEV;
+
flash = kzalloc(sizeof(*flash), GFP_KERNEL);
if (flash == NULL)
return -ENOMEM;
@@ -425,12 +430,21 @@
flash->subdev.internal_ops = &adp1653_internal_ops;
flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- adp1653_init_controls(flash);
+ ret = adp1653_init_controls(flash);
+ if (ret)
+ goto free_and_quit;
ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0);
if (ret < 0)
- kfree(flash);
+ goto free_and_quit;
+ flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
+
+ return 0;
+
+free_and_quit:
+ v4l2_ctrl_handler_free(&flash->ctrls);
+ kfree(flash);
return ret;
}
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index d2327db..206078e 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -61,6 +61,11 @@
static char *inputs[] = { "pass_through", "play_back", "color_bar" };
+static enum v4l2_mbus_pixelcode adv7175_codes[] = {
+ V4L2_MBUS_FMT_UYVY8_2X8,
+ V4L2_MBUS_FMT_UYVY8_1X16,
+};
+
/* ----------------------------------------------------------------------- */
static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value)
@@ -296,6 +301,60 @@
return 0;
}
+static int adv7175_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+ enum v4l2_mbus_pixelcode *code)
+{
+ if (index >= ARRAY_SIZE(adv7175_codes))
+ return -EINVAL;
+
+ *code = adv7175_codes[index];
+ return 0;
+}
+
+static int adv7175_g_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf)
+{
+ u8 val = adv7175_read(sd, 0x7);
+
+ if ((val & 0x40) == (1 << 6))
+ mf->code = V4L2_MBUS_FMT_UYVY8_1X16;
+ else
+ mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ mf->width = 0;
+ mf->height = 0;
+ mf->field = V4L2_FIELD_ANY;
+
+ return 0;
+}
+
+static int adv7175_s_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf)
+{
+ u8 val = adv7175_read(sd, 0x7);
+ int ret;
+
+ switch (mf->code) {
+ case V4L2_MBUS_FMT_UYVY8_2X8:
+ val &= ~0x40;
+ break;
+
+ case V4L2_MBUS_FMT_UYVY8_1X16:
+ val |= 0x40;
+ break;
+
+ default:
+ v4l2_dbg(1, debug, sd,
+ "illegal v4l2_mbus_framefmt code: %d\n", mf->code);
+ return -EINVAL;
+ }
+
+ ret = adv7175_write(sd, 0x7, val);
+
+ return ret;
+}
+
static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -324,6 +383,9 @@
static const struct v4l2_subdev_video_ops adv7175_video_ops = {
.s_std_output = adv7175_s_std_output,
.s_routing = adv7175_s_routing,
+ .s_mbus_fmt = adv7175_s_fmt,
+ .g_mbus_fmt = adv7175_g_fmt,
+ .enum_mbus_fmt = adv7175_enum_fmt,
};
static const struct v4l2_subdev_ops adv7175_ops = {
diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
index 7b89f00..774715d 100644
--- a/drivers/media/video/atmel-isi.c
+++ b/drivers/media/video/atmel-isi.c
@@ -249,7 +249,7 @@
Videobuf operations
------------------------------------------------------------------*/
static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned long sizes[],
+ unsigned int *nplanes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
@@ -341,7 +341,7 @@
/* Initialize the dma descriptor */
desc->p_fbd->fb_address =
- vb2_dma_contig_plane_paddr(vb, 0);
+ vb2_dma_contig_plane_dma_addr(vb, 0);
desc->p_fbd->next_fbd_address = 0;
set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB);
@@ -404,12 +404,13 @@
if (isi->active == NULL) {
isi->active = buf;
- start_dma(isi, buf);
+ if (vb2_is_streaming(vb->vb2_queue))
+ start_dma(isi, buf);
}
spin_unlock_irqrestore(&isi->lock, flags);
}
-static int start_streaming(struct vb2_queue *vq)
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
@@ -431,17 +432,26 @@
ret = wait_event_interruptible(isi->vsync_wq,
isi->state != ISI_STATE_IDLE);
if (ret)
- return ret;
+ goto err;
- if (isi->state != ISI_STATE_READY)
- return -EIO;
+ if (isi->state != ISI_STATE_READY) {
+ ret = -EIO;
+ goto err;
+ }
spin_lock_irq(&isi->lock);
isi->state = ISI_STATE_WAIT_SOF;
isi_writel(isi, ISI_INTDIS, ISI_SR_VSYNC);
+ if (count)
+ start_dma(isi, isi->active);
spin_unlock_irq(&isi->lock);
return 0;
+err:
+ isi->active = NULL;
+ isi->sequence = 0;
+ INIT_LIST_HEAD(&isi->video_buffer_list);
+ return ret;
}
/* abort streaming and wait for last buffer */
diff --git a/drivers/media/video/au0828/Makefile b/drivers/media/video/au0828/Makefile
index 5c7f2f7..bd22223 100644
--- a/drivers/media/video/au0828/Makefile
+++ b/drivers/media/video/au0828/Makefile
@@ -2,8 +2,8 @@
obj-$(CONFIG_VIDEO_AU0828) += au0828.o
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
-EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index f872044..859eabf 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -229,7 +229,7 @@
if (pstd)
*pstd = std;
if (pstatus)
- *pstatus = status;
+ *pstatus = res;
v4l2_dbg(1, debug, sd, "get status %x\n", status);
return 0;
diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile
index e415f6f..3f9a2b2 100644
--- a/drivers/media/video/bt8xx/Makefile
+++ b/drivers/media/video/bt8xx/Makefile
@@ -8,6 +8,6 @@
obj-$(CONFIG_VIDEO_BT848) += bttv.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 5b15f63..5939021 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -25,6 +25,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kmod.h>
@@ -2905,19 +2907,17 @@
if (type != -1) {
/* found it */
- printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
- "PCI subsystem ID is %04x:%04x\n",
- btv->c.nr,cards[type].name,cards[type].cardnr,
- btv->cardid & 0xffff,
- (btv->cardid >> 16) & 0xffff);
+ pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
+ btv->c.nr, cards[type].name, cards[type].cardnr,
+ btv->cardid & 0xffff,
+ (btv->cardid >> 16) & 0xffff);
btv->c.type = cards[type].cardnr;
} else {
/* 404 */
- printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
- btv->c.nr, btv->cardid & 0xffff,
- (btv->cardid >> 16) & 0xffff);
- printk(KERN_DEBUG "please mail id, board name and "
- "the correct card= insmod option to linux-media@vger.kernel.org\n");
+ pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
+ btv->c.nr, btv->cardid & 0xffff,
+ (btv->cardid >> 16) & 0xffff);
+ pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
}
}
@@ -2926,10 +2926,10 @@
btv->c.type=card[btv->c.nr];
/* print which card config we are using */
- printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
- bttv_tvcards[btv->c.type].name, btv->c.type,
- card[btv->c.nr] < bttv_num_tvcards
- ? "insmod option" : "autodetected");
+ pr_info("%d: using: %s [card=%d,%s]\n",
+ btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
+ card[btv->c.nr] < bttv_num_tvcards
+ ? "insmod option" : "autodetected");
/* overwrite gpio stuff ?? */
if (UNSET == audioall && UNSET == audiomux[0])
@@ -2948,12 +2948,13 @@
}
}
bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
- printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
- btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
+ pr_info("%d: gpio config override: mask=0x%x, mux=",
+ btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
- printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
+ pr_cont("%s0x%x",
+ i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
}
- printk("\n");
+ pr_cont("\n");
}
/*
@@ -2974,8 +2975,8 @@
if (-1 != type) {
btv->c.type = type;
- printk("bttv%d: detected by eeprom: %s [card=%d]\n",
- btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
+ pr_info("%d: detected by eeprom: %s [card=%d]\n",
+ btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
}
}
@@ -3019,7 +3020,7 @@
tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
- printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+ pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
break;
}
@@ -3036,13 +3037,13 @@
if (is_capture_only)
tuner_type = TUNER_ABSENT; /* No tuner present */
- printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
- btv->c.nr, has_radio ? "yes" : "no ",
- has_remote ? "yes" : "no ", tuner_type, gpio);
- printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
- btv->c.nr, is_lr90 ? "yes" : "no ",
- has_tda9820_tda9821 ? "yes" : "no ",
- is_capture_only ? "yes" : "no ");
+ pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
+ btv->c.nr, has_radio ? "yes" : "no",
+ has_remote ? "yes" : "no", tuner_type, gpio);
+ pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
+ btv->c.nr, is_lr90 ? "yes" : "no",
+ has_tda9820_tda9821 ? "yes" : "no",
+ is_capture_only ? "yes" : "no");
if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
btv->tuner_type = tuner_type;
@@ -3091,12 +3092,11 @@
if (btv->c.type == BTTV_BOARD_PINNACLE)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
}
- printk(KERN_INFO
- "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
- btv->c.nr, id+1, btv->tuner_type,
- !btv->has_radio ? "no" :
- (btv->has_matchbox ? "matchbox" : "fmtuner"),
- (-1 == msp) ? "no" : "yes");
+ pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
+ btv->c.nr, id+1, btv->tuner_type,
+ !btv->has_radio ? "no" :
+ (btv->has_matchbox ? "matchbox" : "fmtuner"),
+ (-1 == msp) ? "no" : "yes");
} else {
/* new cards with microtune tuner */
id = 63 - id;
@@ -3138,9 +3138,8 @@
}
if (-1 != msp)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
- printk(KERN_INFO
- "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
- btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
+ pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
+ btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
btv->tuner_type = TUNER_MT2032;
}
}
@@ -3202,7 +3201,7 @@
static void init_lmlbt4x(struct bttv *btv)
{
- printk(KERN_DEBUG "LMLBT4x init\n");
+ pr_debug("LMLBT4x init\n");
btwrite(0x000000, BT848_GPIO_REG_INP);
gpio_inout(0xffffff, 0x0006C0);
gpio_write(0x000000);
@@ -3246,7 +3245,7 @@
return;
if (bttv_debug)
- printk("bttv%d: BT878A ARESET\n",btv->c.nr);
+ pr_debug("%d: BT878A ARESET\n", btv->c.nr);
btwrite((1<<7), 0x058);
udelay(10);
btwrite( 0, 0x058);
@@ -3349,7 +3348,8 @@
case BTTV_BOARD_MAGICTVIEW061:
if (btv->cardid == 0x3002144f) {
btv->has_radio=1;
- printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
+ pr_info("%d: radio detected by subsystem id (CPH05x)\n",
+ btv->c.nr);
}
break;
case BTTV_BOARD_STB2:
@@ -3438,17 +3438,16 @@
btv->tuner_type = tuner[btv->c.nr];
if (btv->tuner_type == TUNER_ABSENT)
- printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
- else if(btv->tuner_type == UNSET)
- printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
+ pr_info("%d: tuner absent\n", btv->c.nr);
+ else if (btv->tuner_type == UNSET)
+ pr_warn("%d: tuner type unset\n", btv->c.nr);
else
- printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
- btv->tuner_type);
+ pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
if (autoload != UNSET) {
- printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
- printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
- printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
+ pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
+ pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
+ btv->c.nr);
}
if (UNSET == btv->tuner_type)
@@ -3541,8 +3540,7 @@
}
default:
- printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
- btv->c.nr);
+ pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
return;
}
@@ -3585,8 +3583,7 @@
return;
no_audio:
- printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
- btv->c.nr);
+ pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
}
@@ -3639,19 +3636,19 @@
{
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
- printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
- printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
btv->tuner_type=TUNER_PHILIPS_NTSC;
- printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
} else {
- printk("bttv%d: Modtec: Unknown TunerString: %s\n",
- btv->c.nr,&eeprom_data[0x1e]);
+ pr_info("%d: Modtec: Unknown TunerString: %s\n",
+ btv->c.nr, &eeprom_data[0x1e]);
}
}
@@ -3663,7 +3660,7 @@
btv->tuner_type = tv.tuner_type;
btv->has_radio = tv.has_radio;
- printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
+ pr_info("%d: Hauppauge eeprom indicates model#%d\n",
btv->c.nr, tv.model);
/*
@@ -3671,7 +3668,7 @@
* type based on model #.
*/
if(tv.model == 64900) {
- printk("bttv%d: Switching board type from %s to %s\n",
+ pr_info("%d: Switching board type from %s to %s\n",
btv->c.nr,
bttv_tvcards[btv->c.type].name,
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
@@ -3698,8 +3695,7 @@
freq=88000/62.5;
tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
if (0x1ed8 == tea5757_read(btv)) {
- printk("bttv%d: Terratec Active Radio Upgrade found.\n",
- btv->c.nr);
+ pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
btv->has_radio = 1;
btv->has_saa6588 = 1;
btv->has_matchbox = 1;
@@ -3771,13 +3767,12 @@
rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
if (rc != 0) {
- printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
- btv->c.nr);
+ pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
return rc;
}
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
- printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
- btv->c.nr, (rc < 0) ? "failed" : "ok");
+ pr_info("%d: altera firmware upload %s\n",
+ btv->c.nr, (rc < 0) ? "failed" : "ok");
release_firmware(fw_entry);
return rc;
}
@@ -3873,29 +3868,27 @@
break;
default:
/* unknown...leave generic, but get serial # */
- printk(KERN_INFO "bttv%d: "
- "osprey eeprom: unknown card type 0x%04x\n",
- btv->c.nr, type);
+ pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
+ btv->c.nr, type);
break;
}
serial = get_unaligned_be32((__be32 *)(ee+6));
}
- printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
- btv->c.nr, cardid,
- cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
+ pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
+ btv->c.nr, cardid,
+ cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
if (cardid<0 || btv->c.type == cardid)
return;
/* card type isn't set correctly */
if (card[btv->c.nr] < bttv_num_tvcards) {
- printk(KERN_WARNING "bttv%d: osprey eeprom: "
- "Not overriding user specified card type\n", btv->c.nr);
+ pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
+ btv->c.nr);
} else {
- printk(KERN_INFO "bttv%d: osprey eeprom: "
- "Changing card type from %d to %d\n", btv->c.nr,
- btv->c.type, cardid);
+ pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
+ btv->c.nr, btv->c.type, cardid);
btv->c.type = cardid;
}
}
@@ -3938,14 +3931,14 @@
if (tuner_format == 0x09)
tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
- printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
+ pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
if (tuner_type) {
btv->tuner_type = tuner_type;
- printk(KERN_CONT "%d", tuner_type);
+ pr_cont("%d", tuner_type);
} else
- printk(KERN_CONT "Unknown type");
- printk(KERN_CONT " radio:%s remote control:%s\n",
+ pr_cont("Unknown type");
+ pr_cont(" radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
@@ -3993,8 +3986,8 @@
if (bttv_gpio)
bttv_gpio_tracking(btv,"msp34xx");
if (bttv_verbose)
- printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
- "init [%d]\n", btv->c.nr, pin);
+ pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
+ btv->c.nr, pin);
}
/* ----------------------------------------------------------------------- */
@@ -4034,7 +4027,7 @@
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
/* Initialise MAX517 DAC */
- printk(KERN_INFO "Setting DAC reference voltage level ...\n");
+ pr_info("Setting DAC reference voltage level ...\n");
bttv_I2CWrite(btv,0x5E,0,0x80,1);
/* Initialise 12C508 PIC */
@@ -4043,7 +4036,7 @@
* argument so the numbers are different */
- printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
+ pr_info("Initialising 12C508 PIC chip ...\n");
/* First of all, enable the clock line. This is used in the PXC200-F */
val = btread(BT848_GPIO_DMA_CTL);
@@ -4062,13 +4055,12 @@
for (i = 0; i < ARRAY_SIZE(vals); i++) {
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
if (tmp != -1) {
- printk(KERN_INFO
- "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
+ pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
}
}
- printk(KERN_INFO "PXC200 Initialised.\n");
+ pr_info("PXC200 Initialised\n");
}
@@ -4107,8 +4099,7 @@
uint32_t dataRead = 0;
long watchdog_value = 0x0E;
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
+ pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
btv->c.nr);
btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
@@ -4122,8 +4113,7 @@
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
+ pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
}
@@ -4136,15 +4126,13 @@
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
+ pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
return;
}
- printk (KERN_INFO
- "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
+ pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
}
@@ -4261,22 +4249,25 @@
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
schedule();
if (bus_in(btv,btv->mbox_data)) {
- printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
+ pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
return -1;
}
- dprintk("bttv%d: tea5757:",btv->c.nr);
+ dprintk("%d: tea5757:", btv->c.nr);
for (i = 0; i < 24; i++) {
udelay(5);
bus_high(btv,btv->mbox_clk);
udelay(5);
- dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
+ dprintk_cont("%c",
+ bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
bus_low(btv,btv->mbox_clk);
value <<= 1;
value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
- dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
+ dprintk_cont("%c",
+ bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
}
- dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
+ dprintk_cont("\n");
+ dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
return value;
}
@@ -4295,7 +4286,7 @@
if (bttv_gpio)
bttv_gpio_tracking(btv,"tea5757 write");
- dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
+ dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
bus_low(btv,btv->mbox_clk);
bus_high(btv,btv->mbox_we);
for (i = 0; i < 25; i++) {
@@ -4547,7 +4538,7 @@
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
{
- dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
+ dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
/*GPIO[20]&GPIO[21] used to choose the right input*/
btwrite (input<<20,BT848_GPIO_DATA);
@@ -4592,7 +4583,7 @@
int key = input % 4;
int matrix = input / 4;
- dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
+ dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
btv->c.nr, input, matrix, key);
/* Handles the input selection on the TDA8540's */
@@ -4649,15 +4640,17 @@
buf[1]=0;
rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
if (rc) {
- printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
+ pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
+ btv->c.nr, rc);
/* not PXC ? do nothing */
- return;
+ return;
}
rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
if (!(rc & PX_CFG_PXC200F)) {
- printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
- return;
+ pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
+ btv->c.nr, rc);
+ return;
}
@@ -4696,7 +4689,7 @@
else /* older device */
btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
- printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
+ pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
}
static void phytec_muxsel(struct bttv *btv, unsigned int input)
@@ -4847,29 +4840,27 @@
/* print warnings about any quirks found */
if (triton1)
- printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
+ pr_info("Host bridge needs ETBF enabled\n");
if (vsfx)
- printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
+ pr_info("Host bridge needs VSFX enabled\n");
if (pcipci_fail) {
- printk(KERN_INFO "bttv: bttv and your chipset may not work "
- "together.\n");
+ pr_info("bttv and your chipset may not work together\n");
if (!no_overlay) {
- printk(KERN_INFO "bttv: overlay will be disabled.\n");
+ pr_info("overlay will be disabled\n");
no_overlay = 1;
} else {
- printk(KERN_INFO "bttv: overlay forced. Use this "
- "option at your own risk.\n");
+ pr_info("overlay forced. Use this option at your own risk.\n");
}
}
if (UNSET != latency)
- printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
+ pr_info("pci latency fixup [%d]\n", latency);
while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82441, dev))) {
unsigned char b;
pci_read_config_byte(dev, 0x53, &b);
if (bttv_debug)
- printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
- "bufcon=0x%02x\n",b);
+ pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
+ b);
}
}
@@ -4882,12 +4873,13 @@
if (bttv_verbose) {
if (triton1)
- printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
+ pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
+ btv->c.nr);
if (vsfx && btv->id >= 878)
- printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
+ pr_info("%d: enabling VSFX\n", btv->c.nr);
if (UNSET != latency)
- printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
- btv->c.nr,latency);
+ pr_info("%d: setting pci timer to %d\n",
+ btv->c.nr, latency);
}
if (btv->id < 878) {
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 14444de..3dd0660 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -34,6 +34,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
@@ -942,8 +944,8 @@
void free_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bits)
{
if ((fh->resources & bits) != bits) {
- /* trying to free ressources not allocated by us ... */
- printk("bttv: BUG! (btres)\n");
+ /* trying to free resources not allocated by us ... */
+ pr_err("BUG! (btres)\n");
}
fh->resources &= ~bits;
btv->resources &= ~bits;
@@ -1000,7 +1002,7 @@
return;
if (btv->pll.pll_ofreq == btv->pll.pll_current) {
- dprintk("bttv%d: PLL: no change required\n",btv->c.nr);
+ dprintk("%d: PLL: no change required\n", btv->c.nr);
return;
}
@@ -1008,21 +1010,23 @@
/* no PLL needed */
if (btv->pll.pll_current == 0)
return;
- bttv_printk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
- btv->c.nr,btv->pll.pll_ifreq);
+ if (bttv_verbose)
+ pr_info("%d: PLL can sleep, using XTAL (%d)\n",
+ btv->c.nr, btv->pll.pll_ifreq);
btwrite(0x00,BT848_TGCTRL);
btwrite(0x00,BT848_PLL_XCI);
btv->pll.pll_current = 0;
return;
}
- bttv_printk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->c.nr,
- btv->pll.pll_ifreq, btv->pll.pll_ofreq);
+ if (bttv_verbose)
+ pr_info("%d: Setting PLL: %d => %d (needs up to 100ms)\n",
+ btv->c.nr,
+ btv->pll.pll_ifreq, btv->pll.pll_ofreq);
set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq);
for (i=0; i<10; i++) {
/* Let other people run while the PLL stabilizes */
- bttv_printk(".");
msleep(10);
if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) {
@@ -1030,12 +1034,14 @@
} else {
btwrite(0x08,BT848_TGCTRL);
btv->pll.pll_current = btv->pll.pll_ofreq;
- bttv_printk(" ok\n");
+ if (bttv_verbose)
+ pr_info("PLL set ok\n");
return;
}
}
btv->pll.pll_current = -1;
- bttv_printk("failed\n");
+ if (bttv_verbose)
+ pr_info("Setting PLL failed\n");
return;
}
@@ -1047,7 +1053,7 @@
int fsc = bttv_tvnorms[btv->tvnorm].Fsc;
if (btv->input == btv->dig) {
- dprintk("bttv%d: load digital timing table (table_idx=%d)\n",
+ dprintk("%d: load digital timing table (table_idx=%d)\n",
btv->c.nr,table_idx);
/* timing change...reset timing generator address */
@@ -1076,7 +1082,7 @@
{
int value;
- // printk("bttv: set bright: %d\n",bright); // DEBUG
+ // printk("set bright: %d\n", bright); // DEBUG
btv->bright = bright;
/* We want -128 to 127 we get 0-65535 */
@@ -1150,8 +1156,7 @@
}
mux = bttv_muxsel(btv, input);
btaor(mux<<5, ~(3<<5), BT848_IFORM);
- dprintk(KERN_DEBUG "bttv%d: video mux: input=%d mux=%d\n",
- btv->c.nr,input,mux);
+ dprintk("%d: video mux: input=%d mux=%d\n", btv->c.nr, input, mux);
/* card specific hook */
if(bttv_tvcards[btv->c.type].muxsel_hook)
@@ -1440,7 +1445,7 @@
unsigned long flags;
if (bttv_verbose)
- printk(KERN_INFO "bttv%d: reset, reinitialize\n",btv->c.nr);
+ pr_info("%d: reset, reinitialize\n", btv->c.nr);
spin_lock_irqsave(&btv->s_lock,flags);
btv->errors=0;
bttv_set_dma(btv,0);
@@ -1622,8 +1627,8 @@
unsigned int outbits, data;
outbits = btread(BT848_GPIO_OUT_EN);
data = btread(BT848_GPIO_DATA);
- printk(KERN_DEBUG "bttv%d: gpio: en=%08x, out=%08x in=%08x [%s]\n",
- btv->c.nr,outbits,data & outbits, data & ~outbits, comment);
+ pr_debug("%d: gpio: en=%08x, out=%08x in=%08x [%s]\n",
+ btv->c.nr, outbits, data & outbits, data & ~outbits, comment);
}
static void bttv_field_count(struct bttv *btv)
@@ -1668,7 +1673,7 @@
unsigned long flags;
int retval = 0;
- dprintk("switch_overlay: enter [new=%p]\n",new);
+ dprintk("switch_overlay: enter [new=%p]\n", new);
if (new)
new->vb.state = VIDEOBUF_DONE;
spin_lock_irqsave(&btv->s_lock,flags);
@@ -1678,7 +1683,8 @@
bttv_set_dma(btv, 0x03);
spin_unlock_irqrestore(&btv->s_lock,flags);
if (NULL != old) {
- dprintk("switch_overlay: old=%p state is %d\n",old,old->vb.state);
+ dprintk("switch_overlay: old=%p state is %d\n",
+ old, old->vb.state);
bttv_dma_free(&fh->cap,btv, old);
kfree(old);
}
@@ -2029,11 +2035,11 @@
struct bttv_fh *fh = f;
struct bttv *btv = fh->btv;
- printk(KERN_INFO "bttv%d: ======== START STATUS CARD #%d ========\n",
- btv->c.nr, btv->c.nr);
+ pr_info("%d: ======== START STATUS CARD #%d ========\n",
+ btv->c.nr, btv->c.nr);
bttv_call_all(btv, core, log_status);
- printk(KERN_INFO "bttv%d: ======== END STATUS CARD #%d ========\n",
- btv->c.nr, btv->c.nr);
+ pr_info("%d: ======== END STATUS CARD #%d ========\n",
+ btv->c.nr, btv->c.nr);
return 0;
}
@@ -2598,7 +2604,7 @@
struct bttv *btv = fh->btv;
if (no_overlay > 0) {
- printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+ pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
return -EINVAL;
}
@@ -2673,7 +2679,7 @@
int rc;
if (no_overlay > 0) {
- printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+ pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
return -EINVAL;
}
@@ -2714,7 +2720,7 @@
return -EINVAL;
}
if (unlikely(!fh->ov.setup_ok)) {
- dprintk("bttv%d: overlay: !setup_ok\n", btv->c.nr);
+ dprintk("%d: overlay: !setup_ok\n", btv->c.nr);
retval = -EINVAL;
}
if (retval)
@@ -3091,8 +3097,8 @@
if (fh->btv->errors)
bttv_reinit_bt848(fh->btv);
- dprintk("bttv%d: read count=%d type=%s\n",
- fh->btv->c.nr,(int)count,v4l2_type_names[fh->type]);
+ dprintk("%d: read count=%d type=%s\n",
+ fh->btv->c.nr, (int)count, v4l2_type_names[fh->type]);
switch (fh->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
@@ -3174,7 +3180,7 @@
struct bttv_fh *fh;
enum v4l2_buf_type type = 0;
- dprintk(KERN_DEBUG "bttv: open dev=%s\n", video_device_node_name(vdev));
+ dprintk("open dev=%s\n", video_device_node_name(vdev));
if (vdev->vfl_type == VFL_TYPE_GRABBER) {
type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -3185,8 +3191,8 @@
return -ENODEV;
}
- dprintk(KERN_DEBUG "bttv%d: open called (type=%s)\n",
- btv->c.nr,v4l2_type_names[type]);
+ dprintk("%d: open called (type=%s)\n",
+ btv->c.nr, v4l2_type_names[type]);
/* allocate per filehandle data */
fh = kmalloc(sizeof(*fh), GFP_KERNEL);
@@ -3288,7 +3294,7 @@
{
struct bttv_fh *fh = file->private_data;
- dprintk("bttv%d: mmap type=%s 0x%lx+%ld\n",
+ dprintk("%d: mmap type=%s 0x%lx+%ld\n",
fh->btv->c.nr, v4l2_type_names[fh->type],
vma->vm_start, vma->vm_end - vma->vm_start);
return videobuf_mmap_mapper(bttv_queue(fh),vma);
@@ -3370,9 +3376,9 @@
struct bttv *btv = video_drvdata(file);
struct bttv_fh *fh;
- dprintk("bttv: open dev=%s\n", video_device_node_name(vdev));
+ dprintk("open dev=%s\n", video_device_node_name(vdev));
- dprintk("bttv%d: open called (radio)\n",btv->c.nr);
+ dprintk("%d: open called (radio)\n", btv->c.nr);
/* allocate per filehandle data */
fh = kmalloc(sizeof(*fh), GFP_KERNEL);
@@ -3616,12 +3622,12 @@
};
int i;
- printk("0x%08x [ %s", risc,
+ pr_cont("0x%08x [ %s", risc,
instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
for (i = ARRAY_SIZE(bits)-1; i >= 0; i--)
if (risc & (1 << (i + 12)))
- printk(" %s",bits[i]);
- printk(" count=%d ]\n", risc & 0xfff);
+ pr_cont(" %s", bits[i]);
+ pr_cont(" count=%d ]\n", risc & 0xfff);
return incr[risc >> 28] ? incr[risc >> 28] : 1;
}
@@ -3630,16 +3636,18 @@
{
unsigned int i,j,n;
- printk("%s: risc disasm: %p [dma=0x%08lx]\n",
- btv->c.v4l2_dev.name, risc->cpu, (unsigned long)risc->dma);
+ pr_info("%s: risc disasm: %p [dma=0x%08lx]\n",
+ btv->c.v4l2_dev.name, risc->cpu, (unsigned long)risc->dma);
for (i = 0; i < (risc->size >> 2); i += n) {
- printk("%s: 0x%lx: ", btv->c.v4l2_dev.name,
- (unsigned long)(risc->dma + (i<<2)));
+ pr_info("%s: 0x%lx: ",
+ btv->c.v4l2_dev.name,
+ (unsigned long)(risc->dma + (i<<2)));
n = bttv_risc_decode(le32_to_cpu(risc->cpu[i]));
for (j = 1; j < n; j++)
- printk("%s: 0x%lx: 0x%08x [ arg #%d ]\n",
- btv->c.v4l2_dev.name, (unsigned long)(risc->dma + ((i+j)<<2)),
- risc->cpu[i+j], j);
+ pr_info("%s: 0x%lx: 0x%08x [ arg #%d ]\n",
+ btv->c.v4l2_dev.name,
+ (unsigned long)(risc->dma + ((i+j)<<2)),
+ risc->cpu[i+j], j);
if (0 == risc->cpu[i])
break;
}
@@ -3647,17 +3655,18 @@
static void bttv_print_riscaddr(struct bttv *btv)
{
- printk(" main: %08Lx\n",
- (unsigned long long)btv->main.dma);
- printk(" vbi : o=%08Lx e=%08Lx\n",
- btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0,
- btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0);
- printk(" cap : o=%08Lx e=%08Lx\n",
- btv->curr.top ? (unsigned long long)btv->curr.top->top.dma : 0,
- btv->curr.bottom ? (unsigned long long)btv->curr.bottom->bottom.dma : 0);
- printk(" scr : o=%08Lx e=%08Lx\n",
- btv->screen ? (unsigned long long)btv->screen->top.dma : 0,
- btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0);
+ pr_info(" main: %08llx\n", (unsigned long long)btv->main.dma);
+ pr_info(" vbi : o=%08llx e=%08llx\n",
+ btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0,
+ btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0);
+ pr_info(" cap : o=%08llx e=%08llx\n",
+ btv->curr.top
+ ? (unsigned long long)btv->curr.top->top.dma : 0,
+ btv->curr.bottom
+ ? (unsigned long long)btv->curr.bottom->bottom.dma : 0);
+ pr_info(" scr : o=%08llx e=%08llx\n",
+ btv->screen ? (unsigned long long)btv->screen->top.dma : 0,
+ btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0);
bttv_risc_disasm(btv, &btv->main);
}
@@ -3690,34 +3699,34 @@
{
unsigned int i;
- printk("bits:");
+ pr_cont("bits:");
for (i = 0; i < ARRAY_SIZE(irq_name); i++) {
if (print & (1 << i))
- printk(" %s",irq_name[i]);
+ pr_cont(" %s", irq_name[i]);
if (mark & (1 << i))
- printk("*");
+ pr_cont("*");
}
}
static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc)
{
- printk("bttv%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n",
- btv->c.nr,
- (unsigned long)btv->main.dma,
- (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_VBI+1]),
- (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_FIELD+1]),
- (unsigned long)rc);
+ pr_warn("%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n",
+ btv->c.nr,
+ (unsigned long)btv->main.dma,
+ (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_VBI+1]),
+ (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_FIELD+1]),
+ (unsigned long)rc);
if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) {
- printk("bttv%d: Oh, there (temporarely?) is no input signal. "
- "Ok, then this is harmless, don't worry ;)\n",
- btv->c.nr);
+ pr_notice("%d: Oh, there (temporarily?) is no input signal. "
+ "Ok, then this is harmless, don't worry ;)\n",
+ btv->c.nr);
return;
}
- printk("bttv%d: Uhm. Looks like we have unusual high IRQ latencies.\n",
- btv->c.nr);
- printk("bttv%d: Lets try to catch the culpit red-handed ...\n",
- btv->c.nr);
+ pr_notice("%d: Uhm. Looks like we have unusual high IRQ latencies\n",
+ btv->c.nr);
+ pr_notice("%d: Lets try to catch the culpit red-handed ...\n",
+ btv->c.nr);
dump_stack();
}
@@ -3798,9 +3807,9 @@
}
}
- dprintk("bttv%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n",
- btv->c.nr,set->top, set->bottom,
- btv->screen,set->frame_irq,set->top_irq);
+ dprintk("%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n",
+ btv->c.nr, set->top, set->bottom,
+ btv->screen, set->frame_irq, set->top_irq);
return 0;
}
@@ -3815,7 +3824,8 @@
if (wakeup->top == wakeup->bottom) {
if (NULL != wakeup->top && curr->top != wakeup->top) {
if (irq_debug > 1)
- printk("bttv%d: wakeup: both=%p\n",btv->c.nr,wakeup->top);
+ pr_debug("%d: wakeup: both=%p\n",
+ btv->c.nr, wakeup->top);
wakeup->top->vb.ts = ts;
wakeup->top->vb.field_count = btv->field_count;
wakeup->top->vb.state = state;
@@ -3824,7 +3834,8 @@
} else {
if (NULL != wakeup->top && curr->top != wakeup->top) {
if (irq_debug > 1)
- printk("bttv%d: wakeup: top=%p\n",btv->c.nr,wakeup->top);
+ pr_debug("%d: wakeup: top=%p\n",
+ btv->c.nr, wakeup->top);
wakeup->top->vb.ts = ts;
wakeup->top->vb.field_count = btv->field_count;
wakeup->top->vb.state = state;
@@ -3832,7 +3843,8 @@
}
if (NULL != wakeup->bottom && curr->bottom != wakeup->bottom) {
if (irq_debug > 1)
- printk("bttv%d: wakeup: bottom=%p\n",btv->c.nr,wakeup->bottom);
+ pr_debug("%d: wakeup: bottom=%p\n",
+ btv->c.nr, wakeup->bottom);
wakeup->bottom->vb.ts = ts;
wakeup->bottom->vb.field_count = btv->field_count;
wakeup->bottom->vb.state = state;
@@ -3866,11 +3878,11 @@
unsigned long flags;
if (bttv_verbose) {
- printk(KERN_INFO "bttv%d: timeout: drop=%d irq=%d/%d, risc=%08x, ",
- btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total,
- btread(BT848_RISC_COUNT));
+ pr_info("%d: timeout: drop=%d irq=%d/%d, risc=%08x, ",
+ btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total,
+ btread(BT848_RISC_COUNT));
bttv_print_irqbits(btread(BT848_INT_STAT),0);
- printk("\n");
+ pr_cont("\n");
}
spin_lock_irqsave(&btv->s_lock,flags);
@@ -4033,21 +4045,23 @@
dstat=btread(BT848_DSTATUS);
if (irq_debug) {
- printk(KERN_DEBUG "bttv%d: irq loop=%d fc=%d "
- "riscs=%x, riscc=%08x, ",
- btv->c.nr, count, btv->field_count,
- stat>>28, btread(BT848_RISC_COUNT));
+ pr_debug("%d: irq loop=%d fc=%d riscs=%x, riscc=%08x, ",
+ btv->c.nr, count, btv->field_count,
+ stat>>28, btread(BT848_RISC_COUNT));
bttv_print_irqbits(stat,astat);
if (stat & BT848_INT_HLOCK)
- printk(" HLOC => %s", (dstat & BT848_DSTATUS_HLOC)
- ? "yes" : "no");
+ pr_cont(" HLOC => %s",
+ dstat & BT848_DSTATUS_HLOC
+ ? "yes" : "no");
if (stat & BT848_INT_VPRES)
- printk(" PRES => %s", (dstat & BT848_DSTATUS_PRES)
- ? "yes" : "no");
+ pr_cont(" PRES => %s",
+ dstat & BT848_DSTATUS_PRES
+ ? "yes" : "no");
if (stat & BT848_INT_FMTCHG)
- printk(" NUML => %s", (dstat & BT848_DSTATUS_NUML)
- ? "625" : "525");
- printk("\n");
+ pr_cont(" NUML => %s",
+ dstat & BT848_DSTATUS_NUML
+ ? "625" : "525");
+ pr_cont("\n");
}
if (astat&BT848_INT_VSYNC)
@@ -4075,18 +4089,19 @@
audio_mute(btv, btv->mute); /* trigger automute */
if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) {
- printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr,
- (astat & BT848_INT_SCERR) ? "SCERR" : "",
- (astat & BT848_INT_OCERR) ? "OCERR" : "",
- btread(BT848_RISC_COUNT));
+ pr_info("%d: %s%s @ %08x,",
+ btv->c.nr,
+ (astat & BT848_INT_SCERR) ? "SCERR" : "",
+ (astat & BT848_INT_OCERR) ? "OCERR" : "",
+ btread(BT848_RISC_COUNT));
bttv_print_irqbits(stat,astat);
- printk("\n");
+ pr_cont("\n");
if (bttv_debug)
bttv_print_riscaddr(btv);
}
if (fdsr && astat & BT848_INT_FDSR) {
- printk(KERN_INFO "bttv%d: FDSR @ %08x\n",
- btv->c.nr,btread(BT848_RISC_COUNT));
+ pr_info("%d: FDSR @ %08x\n",
+ btv->c.nr, btread(BT848_RISC_COUNT));
if (bttv_debug)
bttv_print_riscaddr(btv);
}
@@ -4097,11 +4112,11 @@
if (count > 8 || !(astat & BT848_INT_GPINT)) {
btwrite(0, BT848_INT_MASK);
- printk(KERN_ERR
- "bttv%d: IRQ lockup, cleared int mask [", btv->c.nr);
+ pr_err("%d: IRQ lockup, cleared int mask [",
+ btv->c.nr);
} else {
- printk(KERN_ERR
- "bttv%d: IRQ lockup, clearing GPINT from int mask [", btv->c.nr);
+ pr_err("%d: IRQ lockup, clearing GPINT from int mask [",
+ btv->c.nr);
btwrite(btread(BT848_INT_MASK) & (-1 ^ BT848_INT_GPINT),
BT848_INT_MASK);
@@ -4109,7 +4124,7 @@
bttv_print_irqbits(stat,astat);
- printk("]\n");
+ pr_cont("]\n");
}
}
btv->irq_total++;
@@ -4171,7 +4186,7 @@
static int __devinit bttv_register_video(struct bttv *btv)
{
if (no_overlay > 0)
- printk("bttv: Overlay support disabled.\n");
+ pr_notice("Overlay support disabled\n");
/* video */
btv->video_dev = vdev_init(btv, &bttv_video_template, "video");
@@ -4181,12 +4196,11 @@
if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER,
video_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device %s\n",
- btv->c.nr, video_device_node_name(btv->video_dev));
+ pr_info("%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->video_dev));
if (device_create_file(&btv->video_dev->dev,
&dev_attr_card)<0) {
- printk(KERN_ERR "bttv%d: device_create_file 'card' "
- "failed\n", btv->c.nr);
+ pr_err("%d: device_create_file 'card' failed\n", btv->c.nr);
goto err;
}
@@ -4198,8 +4212,8 @@
if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI,
vbi_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device %s\n",
- btv->c.nr, video_device_node_name(btv->vbi_dev));
+ pr_info("%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->vbi_dev));
if (!btv->has_radio)
return 0;
@@ -4210,8 +4224,8 @@
if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,
radio_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device %s\n",
- btv->c.nr, video_device_node_name(btv->radio_dev));
+ pr_info("%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->radio_dev));
/* all done */
return 0;
@@ -4244,10 +4258,10 @@
if (bttv_num == BTTV_MAX)
return -ENOMEM;
- printk(KERN_INFO "bttv: Bt8xx card found (%d).\n", bttv_num);
+ pr_info("Bt8xx card found (%d)\n", bttv_num);
bttvs[bttv_num] = btv = kzalloc(sizeof(*btv), GFP_KERNEL);
if (btv == NULL) {
- printk(KERN_ERR "bttv: out of memory.\n");
+ pr_err("out of memory\n");
return -ENOMEM;
}
btv->c.nr = bttv_num;
@@ -4277,21 +4291,19 @@
btv->c.pci = dev;
btv->id = dev->device;
if (pci_enable_device(dev)) {
- printk(KERN_WARNING "bttv%d: Can't enable device.\n",
- btv->c.nr);
+ pr_warn("%d: Can't enable device\n", btv->c.nr);
return -EIO;
}
if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING "bttv%d: No suitable DMA available.\n",
- btv->c.nr);
+ pr_warn("%d: No suitable DMA available\n", btv->c.nr);
return -EIO;
}
if (!request_mem_region(pci_resource_start(dev,0),
pci_resource_len(dev,0),
btv->c.v4l2_dev.name)) {
- printk(KERN_WARNING "bttv%d: can't request iomem (0x%llx).\n",
- btv->c.nr,
- (unsigned long long)pci_resource_start(dev,0));
+ pr_warn("%d: can't request iomem (0x%llx)\n",
+ btv->c.nr,
+ (unsigned long long)pci_resource_start(dev, 0));
return -EBUSY;
}
pci_set_master(dev);
@@ -4299,22 +4311,21 @@
result = v4l2_device_register(&dev->dev, &btv->c.v4l2_dev);
if (result < 0) {
- printk(KERN_WARNING "bttv%d: v4l2_device_register() failed\n", btv->c.nr);
+ pr_warn("%d: v4l2_device_register() failed\n", btv->c.nr);
goto fail0;
}
btv->revision = dev->revision;
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
- printk(KERN_INFO "bttv%d: Bt%d (rev %d) at %s, ",
- bttv_num,btv->id, btv->revision, pci_name(dev));
- printk("irq: %d, latency: %d, mmio: 0x%llx\n",
- btv->c.pci->irq, lat,
- (unsigned long long)pci_resource_start(dev,0));
+ pr_info("%d: Bt%d (rev %d) at %s, irq: %d, latency: %d, mmio: 0x%llx\n",
+ bttv_num, btv->id, btv->revision, pci_name(dev),
+ btv->c.pci->irq, lat,
+ (unsigned long long)pci_resource_start(dev, 0));
schedule();
btv->bt848_mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
if (NULL == btv->bt848_mmio) {
- printk("bttv%d: ioremap() failed\n", btv->c.nr);
+ pr_err("%d: ioremap() failed\n", btv->c.nr);
result = -EIO;
goto fail1;
}
@@ -4327,8 +4338,8 @@
result = request_irq(btv->c.pci->irq, bttv_irq,
IRQF_SHARED | IRQF_DISABLED, btv->c.v4l2_dev.name, (void *)btv);
if (result < 0) {
- printk(KERN_ERR "bttv%d: can't get IRQ %d\n",
- bttv_num,btv->c.pci->irq);
+ pr_err("%d: can't get IRQ %d\n",
+ bttv_num, btv->c.pci->irq);
goto fail1;
}
@@ -4433,7 +4444,7 @@
struct bttv *btv = to_bttv(v4l2_dev);
if (bttv_verbose)
- printk("bttv%d: unloading\n",btv->c.nr);
+ pr_info("%d: unloading\n", btv->c.nr);
if (bttv_tvcards[btv->c.type].has_dvb)
flush_request_modules(btv);
@@ -4481,7 +4492,7 @@
struct bttv_buffer_set idle;
unsigned long flags;
- dprintk("bttv%d: suspend %d\n", btv->c.nr, state.event);
+ dprintk("%d: suspend %d\n", btv->c.nr, state.event);
/* stop dma + irqs */
spin_lock_irqsave(&btv->s_lock,flags);
@@ -4517,14 +4528,13 @@
unsigned long flags;
int err;
- dprintk("bttv%d: resume\n", btv->c.nr);
+ dprintk("%d: resume\n", btv->c.nr);
/* restore pci state */
if (btv->state.disabled) {
err=pci_enable_device(pci_dev);
if (err) {
- printk(KERN_WARNING "bttv%d: Can't enable device.\n",
- btv->c.nr);
+ pr_warn("%d: Can't enable device\n", btv->c.nr);
return err;
}
btv->state.disabled = 0;
@@ -4532,8 +4542,7 @@
err=pci_set_power_state(pci_dev, PCI_D0);
if (err) {
pci_disable_device(pci_dev);
- printk(KERN_WARNING "bttv%d: Can't enable device.\n",
- btv->c.nr);
+ pr_warn("%d: Can't enable device\n", btv->c.nr);
btv->state.disabled = 1;
return err;
}
@@ -4585,22 +4594,21 @@
bttv_num = 0;
- printk(KERN_INFO "bttv: driver version %s loaded\n",
- BTTV_VERSION);
+ pr_info("driver version %s loaded\n", BTTV_VERSION);
if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
gbuffers = 2;
if (gbufsize > BTTV_MAX_FBUF)
gbufsize = BTTV_MAX_FBUF;
gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK;
if (bttv_verbose)
- printk(KERN_INFO "bttv: using %d buffers with %dk (%d pages) each for capture\n",
- gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT);
+ pr_info("using %d buffers with %dk (%d pages) each for capture\n",
+ gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT);
bttv_check_chipset();
ret = bus_register(&bttv_sub_bus_type);
if (ret < 0) {
- printk(KERN_WARNING "bttv: bus_register error: %d\n", ret);
+ pr_warn("bus_register error: %d\n", ret);
return ret;
}
ret = pci_register_driver(&bttv_pci_driver);
diff --git a/drivers/media/video/bt8xx/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c
index 13ce72c..922e823 100644
--- a/drivers/media/video/bt8xx/bttv-gpio.c
+++ b/drivers/media/video/bt8xx/bttv-gpio.c
@@ -26,6 +26,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -99,7 +101,7 @@
kfree(sub);
return err;
}
- printk("bttv%d: add subdevice \"%s\"\n", core->nr, dev_name(&sub->dev));
+ pr_info("%d: add subdevice \"%s\"\n", core->nr, dev_name(&sub->dev));
list_add_tail(&sub->list,&core->subs);
return 0;
}
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index d49b675..e3952af 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -27,6 +27,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -154,9 +156,7 @@
if (retval == 0)
goto eio;
if (i2c_debug) {
- printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
- if (!(xmit & BT878_I2C_NOSTOP))
- printk(" >\n");
+ pr_cont(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
}
for (cnt = 1; cnt < msg->len; cnt++ ) {
@@ -170,19 +170,18 @@
goto err;
if (retval == 0)
goto eio;
- if (i2c_debug) {
- printk(" %02x", msg->buf[cnt]);
- if (!(xmit & BT878_I2C_NOSTOP))
- printk(" >\n");
- }
+ if (i2c_debug)
+ pr_cont(" %02x", msg->buf[cnt]);
}
+ if (!(xmit & BT878_I2C_NOSTOP))
+ pr_cont(">\n");
return msg->len;
eio:
retval = -EIO;
err:
if (i2c_debug)
- printk(" ERR: %d\n",retval);
+ pr_cont(" ERR: %d\n",retval);
return retval;
}
@@ -193,7 +192,7 @@
u32 cnt;
int retval;
- for(cnt = 0; cnt < msg->len; cnt++) {
+ for (cnt = 0; cnt < msg->len; cnt++) {
xmit = (msg->addr << 25) | (1 << 24) | I2C_HW;
if (cnt < msg->len-1)
xmit |= BT848_I2C_W3B;
@@ -201,6 +200,12 @@
xmit |= BT878_I2C_NOSTOP;
if (cnt)
xmit |= BT878_I2C_NOSTART;
+
+ if (i2c_debug) {
+ if (!(xmit & BT878_I2C_NOSTART))
+ pr_cont(" <R %02x", (msg->addr << 1) +1);
+ }
+
btwrite(xmit, BT848_I2C);
retval = bttv_i2c_wait_done(btv);
if (retval < 0)
@@ -209,20 +214,20 @@
goto eio;
msg->buf[cnt] = ((u32)btread(BT848_I2C) >> 8) & 0xff;
if (i2c_debug) {
- if (!(xmit & BT878_I2C_NOSTART))
- printk(" <R %02x", (msg->addr << 1) +1);
- printk(" =%02x", msg->buf[cnt]);
- if (!(xmit & BT878_I2C_NOSTOP))
- printk(" >\n");
+ pr_cont(" =%02x", msg->buf[cnt]);
}
+ if (i2c_debug && !(xmit & BT878_I2C_NOSTOP))
+ pr_cont(" >\n");
}
+
+
return msg->len;
eio:
retval = -EIO;
err:
if (i2c_debug)
- printk(" ERR: %d\n",retval);
+ pr_cont(" ERR: %d\n",retval);
return retval;
}
@@ -234,7 +239,8 @@
int i;
if (i2c_debug)
- printk("bt-i2c:");
+ pr_debug("bt-i2c:");
+
btwrite(BT848_INT_I2CDONE|BT848_INT_RACK, BT848_INT_STAT);
for (i = 0 ; i < num; i++) {
if (msgs[i].flags & I2C_M_RD) {
@@ -271,20 +277,20 @@
if (0 != btv->i2c_rc)
return -1;
if (bttv_verbose && NULL != probe_for)
- printk(KERN_INFO "bttv%d: i2c: checking for %s @ 0x%02x... ",
- btv->c.nr,probe_for,addr);
+ pr_info("%d: i2c: checking for %s @ 0x%02x... ",
+ btv->c.nr, probe_for, addr);
btv->i2c_client.addr = addr >> 1;
if (1 != i2c_master_recv(&btv->i2c_client, &buffer, 1)) {
if (NULL != probe_for) {
if (bttv_verbose)
- printk("not found\n");
+ pr_cont("not found\n");
} else
- printk(KERN_WARNING "bttv%d: i2c read 0x%x: error\n",
- btv->c.nr,addr);
+ pr_warn("%d: i2c read 0x%x: error\n",
+ btv->c.nr, addr);
return -1;
}
if (bttv_verbose && NULL != probe_for)
- printk("found\n");
+ pr_cont("found\n");
return buffer;
}
@@ -335,8 +341,8 @@
rc = i2c_master_recv(c,&buf,0);
if (rc < 0)
continue;
- printk("%s: i2c scan: found device @ 0x%x [%s]\n",
- name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+ pr_info("%s: i2c scan: found device @ 0x%x [%s]\n",
+ name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
}
}
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 677d70c..ef4c7cd 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -36,9 +38,10 @@
module_param(ir_rc5_remote_gap, int, 0644);
#undef dprintk
-#define dprintk(arg...) do { \
- if (ir_debug >= 1) \
- printk(arg); \
+#define dprintk(fmt, ...) \
+do { \
+ if (ir_debug >= 1) \
+ pr_info(fmt, ##__VA_ARGS__); \
} while (0)
#define DEVNAME "bttv-input"
@@ -62,7 +65,7 @@
/* extract data */
data = ir_extract_bits(gpio, ir->mask_keycode);
- dprintk(KERN_INFO DEVNAME ": irq gpio=0x%x code=%d | %s%s%s\n",
+ dprintk("irq gpio=0x%x code=%d | %s%s%s\n",
gpio, data,
ir->polling ? "poll" : "irq",
(gpio & ir->mask_keydown) ? " down" : "",
@@ -96,7 +99,7 @@
keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0;
if ((ir->last_gpio & 0x7f) != data) {
- dprintk(KERN_INFO DEVNAME ": gpio=0x%x code=%d | %s\n",
+ dprintk("gpio=0x%x code=%d | %s\n",
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "up/down");
@@ -107,7 +110,7 @@
if ((ir->last_gpio & 1 << 31) == keyup)
return;
- dprintk(KERN_INFO DEVNAME ":(cnt) gpio=0x%x code=%d | %s\n",
+ dprintk("(cnt) gpio=0x%x code=%d | %s\n",
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "down");
@@ -177,13 +180,12 @@
rc5 |= 1;
break;
case 3:
- dprintk(KERN_INFO DEVNAME ":rc5_decode(%x) bad code\n",
+ dprintk("rc5_decode(%x) bad code\n",
org_code);
return 0;
}
}
- dprintk(KERN_INFO DEVNAME ":"
- "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+ dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
"instr=%x\n", rc5, org_code, RC5_START(rc5),
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
return rc5;
@@ -212,20 +214,20 @@
/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
if (gap < 28000) {
- dprintk(KERN_INFO DEVNAME ": spurious timer_end\n");
+ dprintk("spurious timer_end\n");
return;
}
if (ir->last_bit < 20) {
/* ignore spurious codes (caused by light/other remotes) */
- dprintk(KERN_INFO DEVNAME ": short code: %x\n", ir->code);
+ dprintk("short code: %x\n", ir->code);
} else {
ir->code = (ir->code << ir->shift_by) | 1;
rc5 = bttv_rc5_decode(ir->code);
/* two start bits? */
if (RC5_START(rc5) != ir->start) {
- printk(KERN_INFO DEVNAME ":"
+ pr_info(DEVNAME ":"
" rc5 start bits invalid: %u\n", RC5_START(rc5));
/* right address? */
@@ -235,8 +237,7 @@
/* Good code */
rc_keydown(ir->dev, instr, toggle);
- dprintk(KERN_INFO DEVNAME ":"
- " instruction %x, toggle %x\n",
+ dprintk("instruction %x, toggle %x\n",
instr, toggle);
}
}
@@ -265,7 +266,7 @@
tv.tv_usec - ir->base_time.tv_usec;
}
- dprintk(KERN_INFO DEVNAME ": RC5 IRQ: gap %d us for %s\n",
+ dprintk("RC5 IRQ: gap %d us for %s\n",
gap, (gpio & 0x20) ? "mark" : "space");
/* remote IRQ? */
@@ -340,14 +341,14 @@
/* poll IR chip */
if (1 != i2c_master_recv(ir->c, &b, 1)) {
- dprintk(KERN_INFO DEVNAME ": read error\n");
+ dprintk("read error\n");
return -EIO;
}
/* ignore 0xaa */
if (b==0xaa)
return 0;
- dprintk(KERN_INFO DEVNAME ": key %02x\n", b);
+ dprintk("key %02x\n", b);
/*
* NOTE:
@@ -517,7 +518,7 @@
break;
}
if (NULL == ir_codes) {
- dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type);
+ dprintk("Ooops: IR config error [card=%d]\n", btv->c.type);
err = -ENODEV;
goto err_out_free;
}
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 9b57d09..82cc47d 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -24,6 +24,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -473,8 +475,7 @@
capctl |= (btv->cap_ctl & 0x0c) ? 0x0c : 0x00; /* vbi data */
capctl |= override;
- d2printk(KERN_DEBUG
- "bttv%d: capctl=%x lirq=%d top=%08Lx/%08Lx even=%08Lx/%08Lx\n",
+ d2printk("%d: capctl=%x lirq=%d top=%08llx/%08llx even=%08llx/%08llx\n",
btv->c.nr,capctl,btv->loop_irq,
btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0,
btv->curr.top ? (unsigned long long)btv->curr.top->top.dma : 0,
@@ -517,8 +518,8 @@
if ((rc = btcx_riscmem_alloc(btv->c.pci,&btv->main,PAGE_SIZE)) < 0)
return rc;
- dprintk(KERN_DEBUG "bttv%d: risc main @ %08Lx\n",
- btv->c.nr,(unsigned long long)btv->main.dma);
+ dprintk("%d: risc main @ %08llx\n",
+ btv->c.nr, (unsigned long long)btv->main.dma);
btv->main.cpu[0] = cpu_to_le32(BT848_RISC_SYNC | BT848_RISC_RESYNC |
BT848_FIFO_STATUS_VRE);
@@ -557,12 +558,12 @@
unsigned long next = btv->main.dma + ((slot+2) << 2);
if (NULL == risc) {
- d2printk(KERN_DEBUG "bttv%d: risc=%p slot[%d]=NULL\n",
- btv->c.nr,risc,slot);
+ d2printk("%d: risc=%p slot[%d]=NULL\n", btv->c.nr, risc, slot);
btv->main.cpu[slot+1] = cpu_to_le32(next);
} else {
- d2printk(KERN_DEBUG "bttv%d: risc=%p slot[%d]=%08Lx irq=%d\n",
- btv->c.nr,risc,slot,(unsigned long long)risc->dma,irqflags);
+ d2printk("%d: risc=%p slot[%d]=%08llx irq=%d\n",
+ btv->c.nr, risc, slot,
+ (unsigned long long)risc->dma, irqflags);
cmd = BT848_RISC_JUMP;
if (irqflags) {
cmd |= BT848_RISC_IRQ;
@@ -708,8 +709,7 @@
const struct bttv_tvnorm *tvnorm = bttv_tvnorms + buf->tvnorm;
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
- dprintk(KERN_DEBUG
- "bttv%d: buffer field: %s format: %s size: %dx%d\n",
+ dprintk("%d: buffer field: %s format: %s size: %dx%d\n",
btv->c.nr, v4l2_field_names[buf->vb.field],
buf->fmt->name, buf->vb.width, buf->vb.height);
@@ -870,10 +870,9 @@
struct bttv_buffer *buf)
{
/* check interleave, bottom+top fields */
- dprintk(KERN_DEBUG
- "bttv%d: overlay fields: %s format: %s size: %dx%d\n",
+ dprintk("%d: overlay fields: %s format: %s size: %dx%d\n",
btv->c.nr, v4l2_field_names[buf->vb.field],
- fmt->name,ov->w.width,ov->w.height);
+ fmt->name, ov->w.width, ov->w.height);
/* calculate geometry */
bttv_calc_geo(btv,&buf->geo,ov->w.width,ov->w.height,
diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
index e79a402..b433267 100644
--- a/drivers/media/video/bt8xx/bttv-vbi.c
+++ b/drivers/media/video/bt8xx/bttv-vbi.c
@@ -23,6 +23,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/fs.h>
@@ -65,8 +67,11 @@
#ifdef dprintk
# undef dprintk
#endif
-#define dprintk(fmt, arg...) if (vbi_debug) \
- printk(KERN_DEBUG "bttv%d/vbi: " fmt, btv->c.nr , ## arg)
+#define dprintk(fmt, ...) \
+do { \
+ if (vbi_debug) \
+ pr_debug("%d: " fmt, btv->c.nr, ##__VA_ARGS__); \
+} while (0)
#define IMAGE_SIZE(fmt) \
(((fmt)->count[0] + (fmt)->count[1]) * (fmt)->samples_per_line)
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 318edf2..db943a8d 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -310,9 +310,21 @@
extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
extern int init_bttv_i2c(struct bttv *btv);
-#define bttv_printk if (bttv_verbose) printk
-#define dprintk if (bttv_debug >= 1) printk
-#define d2printk if (bttv_debug >= 2) printk
+#define dprintk(fmt, ...) \
+do { \
+ if (bttv_debug >= 1) \
+ pr_debug(fmt, ##__VA_ARGS__); \
+} while (0)
+#define dprintk_cont(fmt, ...) \
+do { \
+ if (bttv_debug >= 1) \
+ pr_cont(fmt, ##__VA_ARGS__); \
+} while (0)
+#define d2printk(fmt, ...) \
+do { \
+ if (bttv_debug >= 2) \
+ printk(fmt, ##__VA_ARGS__); \
+} while (0)
#define BTTV_MAX_FBUF 0x208000
#define BTTV_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */
diff --git a/drivers/media/video/cx18/Makefile b/drivers/media/video/cx18/Makefile
index 2fadd9de..a86bab58 100644
--- a/drivers/media/video/cx18/Makefile
+++ b/drivers/media/video/cx18/Makefile
@@ -8,6 +8,6 @@
obj-$(CONFIG_VIDEO_CX18) += cx18.o
obj-$(CONFIG_VIDEO_CX18_ALSA) += cx18-alsa.o
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 1834207..b9a94fc 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -409,6 +409,7 @@
/* Videobuf for YUV video */
u32 pixelformat;
+ u32 vb_bytes_per_frame;
struct list_head vb_capture; /* video capture queue */
spinlock_t vb_lock;
struct timer_list vb_timeout;
@@ -430,10 +431,6 @@
u32 open_id;
int type;
struct cx18 *cx;
-
- struct videobuf_queue vbuf_q;
- spinlock_t s_lock; /* Protect vbuf_q */
- enum v4l2_buf_type vb_type;
};
static inline struct cx18_open_id *fh2id(struct v4l2_fh *fh)
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index 07411f3..14cb961 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -784,8 +784,6 @@
cx18_release_stream(s);
} else {
cx18_stop_capture(id, 0);
- if (id->type == CX18_ENC_STREAM_TYPE_YUV)
- videobuf_mmap_free(&id->vbuf_q);
}
kfree(id);
mutex_unlock(&cx->serialize_lock);
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index afe0a29..66b1c15 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -160,12 +160,7 @@
pixfmt->priv = 0;
if (id->type == CX18_ENC_STREAM_TYPE_YUV) {
pixfmt->pixelformat = s->pixelformat;
- /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
- UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
- if (s->pixelformat == V4L2_PIX_FMT_HM12)
- pixfmt->sizeimage = pixfmt->height * 720 * 3 / 2;
- else
- pixfmt->sizeimage = pixfmt->height * 720 * 2;
+ pixfmt->sizeimage = s->vb_bytes_per_frame;
pixfmt->bytesperline = 720;
} else {
pixfmt->pixelformat = V4L2_PIX_FMT_MPEG;
@@ -296,6 +291,12 @@
return -EBUSY;
s->pixelformat = fmt->fmt.pix.pixelformat;
+ /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
+ UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
+ if (s->pixelformat == V4L2_PIX_FMT_HM12)
+ s->vb_bytes_per_frame = h * 720 * 3 / 2;
+ else
+ s->vb_bytes_per_frame = h * 720 * 2;
mbus_fmt.width = cx->cxhdl.width = w;
mbus_fmt.height = cx->cxhdl.height = h;
@@ -463,13 +464,16 @@
static int cx18_querycap(struct file *file, void *fh,
struct v4l2_capability *vcap)
{
- struct cx18 *cx = fh2id(fh)->cx;
+ struct cx18_open_id *id = fh2id(fh);
+ struct cx18 *cx = id->cx;
strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver));
strlcpy(vcap->card, cx->card_name, sizeof(vcap->card));
snprintf(vcap->bus_info, sizeof(vcap->bus_info),
"PCI:%s", pci_name(cx->pci_dev));
vcap->capabilities = cx->v4l2_cap; /* capabilities */
+ if (id->type == CX18_ENC_STREAM_TYPE_YUV)
+ vcap->capabilities |= V4L2_CAP_STREAMING;
return 0;
}
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index c07191e..0c7796e 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -196,7 +196,7 @@
}
/* If we've filled the buffer as per the callers res then dispatch it */
- if (vb_buf->bytes_used >= (vb_buf->vb.width * vb_buf->vb.height * 2)) {
+ if (vb_buf->bytes_used >= s->vb_bytes_per_frame) {
dispatch = 1;
vb_buf->bytes_used = 0;
}
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 852f420..638cca1 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -138,6 +138,12 @@
buf->tvnorm = cx->std;
s->pixelformat = pixelformat;
+ /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
+ UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
+ if (s->pixelformat == V4L2_PIX_FMT_HM12)
+ s->vb_bytes_per_frame = height * 720 * 3 / 2;
+ else
+ s->vb_bytes_per_frame = height * 720 * 2;
cx18_dma_free(q, s, buf);
}
@@ -154,6 +160,12 @@
buf->tvnorm = cx->std;
s->pixelformat = pixelformat;
+ /* HM12 YUV size is (Y=(h*720) + UV=(h*(720/2)))
+ UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */
+ if (s->pixelformat == V4L2_PIX_FMT_HM12)
+ s->vb_bytes_per_frame = height * 720 * 3 / 2;
+ else
+ s->vb_bytes_per_frame = height * 720 * 2;
rc = videobuf_iolock(q, &buf->vb, NULL);
if (rc != 0)
goto fail;
@@ -287,6 +299,7 @@
/* Assume the previous pixel default */
s->pixelformat = V4L2_PIX_FMT_HM12;
+ s->vb_bytes_per_frame = cx->cxhdl.height * 720 * 3 / 2;
}
}
diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/video/cx231xx/Makefile
index 2c24843..b334897 100644
--- a/drivers/media/video/cx231xx/Makefile
+++ b/drivers/media/video/cx231xx/Makefile
@@ -8,9 +8,9 @@
obj-$(CONFIG_VIDEO_CX231XX_ALSA) += cx231xx-alsa.o
obj-$(CONFIG_VIDEO_CX231XX_DVB) += cx231xx-dvb.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/dvb/dvb-usb
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index caab1bf..b391e9b 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -38,7 +38,7 @@
config MEDIA_ALTERA_CI
tristate "Altera FPGA based CI module"
depends on VIDEO_CX23885 && DVB_CORE
- select STAPL_ALTERA
+ select ALTERA_STAPL
---help---
An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card.
diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile
index 23293c7..f81f279 100644
--- a/drivers/media/video/cx23885/Makefile
+++ b/drivers/media/video/cx23885/Makefile
@@ -2,14 +2,14 @@
cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \
cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \
- cx23885-f300.o
+ cx23885-f300.o cx23885-alsa.o
obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
obj-$(CONFIG_MEDIA_ALTERA_CI) += altera-ci.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
-EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/cx23885/cx23885-alsa.c b/drivers/media/video/cx23885/cx23885-alsa.c
new file mode 100644
index 0000000..7951692
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-alsa.c
@@ -0,0 +1,535 @@
+/*
+ *
+ * Support for CX23885 analog audio capture
+ *
+ * (c) 2008 Mijhail Moreyra <mijhail.moreyra@gmail.com>
+ * Adapted from cx88-alsa.c
+ * (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+
+#include <asm/delay.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+
+#include <sound/tlv.h>
+
+
+#include "cx23885.h"
+#include "cx23885-reg.h"
+
+#define AUDIO_SRAM_CHANNEL SRAM_CH07
+
+#define dprintk(level, fmt, arg...) if (audio_debug >= level) \
+ printk(KERN_INFO "%s: " fmt, chip->dev->name , ## arg)
+
+#define dprintk_core(level, fmt, arg...) if (audio_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt, chip->dev->name , ## arg)
+
+/****************************************************************************
+ Module global static vars
+ ****************************************************************************/
+
+static unsigned int disable_analog_audio;
+module_param(disable_analog_audio, int, 0644);
+MODULE_PARM_DESC(disable_analog_audio, "disable analog audio ALSA driver");
+
+static unsigned int audio_debug;
+module_param(audio_debug, int, 0644);
+MODULE_PARM_DESC(audio_debug, "enable debug messages [analog audio]");
+
+/****************************************************************************
+ Board specific funtions
+ ****************************************************************************/
+
+/* Constants taken from cx88-reg.h */
+#define AUD_INT_DN_RISCI1 (1 << 0)
+#define AUD_INT_UP_RISCI1 (1 << 1)
+#define AUD_INT_RDS_DN_RISCI1 (1 << 2)
+#define AUD_INT_DN_RISCI2 (1 << 4) /* yes, 3 is skipped */
+#define AUD_INT_UP_RISCI2 (1 << 5)
+#define AUD_INT_RDS_DN_RISCI2 (1 << 6)
+#define AUD_INT_DN_SYNC (1 << 12)
+#define AUD_INT_UP_SYNC (1 << 13)
+#define AUD_INT_RDS_DN_SYNC (1 << 14)
+#define AUD_INT_OPC_ERR (1 << 16)
+#define AUD_INT_BER_IRQ (1 << 20)
+#define AUD_INT_MCHG_IRQ (1 << 21)
+#define GP_COUNT_CONTROL_RESET 0x3
+
+/*
+ * BOARD Specific: Sets audio DMA
+ */
+
+static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip)
+{
+ struct cx23885_audio_buffer *buf = chip->buf;
+ struct cx23885_dev *dev = chip->dev;
+ struct sram_channel *audio_ch =
+ &dev->sram_channels[AUDIO_SRAM_CHANNEL];
+
+ dprintk(1, "%s()\n", __func__);
+
+ /* Make sure RISC/FIFO are off before changing FIFO/RISC settings */
+ cx_clear(AUD_INT_DMA_CTL, 0x11);
+
+ /* setup fifo + format - out channel */
+ cx23885_sram_channel_setup(chip->dev, audio_ch, buf->bpl,
+ buf->risc.dma);
+
+ /* sets bpl size */
+ cx_write(AUD_INT_A_LNGTH, buf->bpl);
+
+ /* This is required to get good audio (1 seems to be ok) */
+ cx_write(AUD_INT_A_MODE, 1);
+
+ /* reset counter */
+ cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
+ atomic_set(&chip->count, 0);
+
+ dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
+ "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
+ chip->num_periods, buf->bpl * chip->num_periods);
+
+ /* Enables corresponding bits at AUD_INT_STAT */
+ cx_write(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+ AUD_INT_DN_RISCI1);
+
+ /* Clean any pending interrupt bits already set */
+ cx_write(AUDIO_INT_INT_STAT, ~0);
+
+ /* enable audio irqs */
+ cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT);
+
+ /* start dma */
+ cx_set(DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */
+ cx_set(AUD_INT_DMA_CTL, 0x11); /* audio downstream FIFO and
+ RISC enable */
+ if (audio_debug)
+ cx23885_sram_channel_dump(chip->dev, audio_ch);
+
+ return 0;
+}
+
+/*
+ * BOARD Specific: Resets audio DMA
+ */
+static int cx23885_stop_audio_dma(struct cx23885_audio_dev *chip)
+{
+ struct cx23885_dev *dev = chip->dev;
+ dprintk(1, "Stopping audio DMA\n");
+
+ /* stop dma */
+ cx_clear(AUD_INT_DMA_CTL, 0x11);
+
+ /* disable irqs */
+ cx_clear(PCI_INT_MSK, PCI_MSK_AUD_INT);
+ cx_clear(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+ AUD_INT_DN_RISCI1);
+
+ if (audio_debug)
+ cx23885_sram_channel_dump(chip->dev,
+ &dev->sram_channels[AUDIO_SRAM_CHANNEL]);
+
+ return 0;
+}
+
+/*
+ * BOARD Specific: Handles audio IRQ
+ */
+int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask)
+{
+ struct cx23885_audio_dev *chip = dev->audio_dev;
+
+ if (0 == (status & mask))
+ return 0;
+
+ cx_write(AUDIO_INT_INT_STAT, status);
+
+ /* risc op code error */
+ if (status & AUD_INT_OPC_ERR) {
+ printk(KERN_WARNING "%s/1: Audio risc op code error\n",
+ dev->name);
+ cx_clear(AUD_INT_DMA_CTL, 0x11);
+ cx23885_sram_channel_dump(dev,
+ &dev->sram_channels[AUDIO_SRAM_CHANNEL]);
+ }
+ if (status & AUD_INT_DN_SYNC) {
+ dprintk(1, "Downstream sync error\n");
+ cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
+ return 1;
+ }
+ /* risc1 downstream */
+ if (status & AUD_INT_DN_RISCI1) {
+ atomic_set(&chip->count, cx_read(AUD_INT_A_GPCNT));
+ snd_pcm_period_elapsed(chip->substream);
+ }
+ /* FIXME: Any other status should deserve a special handling? */
+
+ return 1;
+}
+
+static int dsp_buffer_free(struct cx23885_audio_dev *chip)
+{
+ BUG_ON(!chip->dma_size);
+
+ dprintk(2, "Freeing buffer\n");
+ videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc);
+ videobuf_dma_free(chip->dma_risc);
+ btcx_riscmem_free(chip->pci, &chip->buf->risc);
+ kfree(chip->buf);
+
+ chip->dma_risc = NULL;
+ chip->dma_size = 0;
+
+ return 0;
+}
+
+/****************************************************************************
+ ALSA PCM Interface
+ ****************************************************************************/
+
+/*
+ * Digital hardware definition
+ */
+#define DEFAULT_FIFO_SIZE 4096
+
+static struct snd_pcm_hardware snd_cx23885_digital_hw = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ /* Analog audio output will be full of clicks and pops if there
+ are not exactly four lines in the SRAM FIFO buffer. */
+ .period_bytes_min = DEFAULT_FIFO_SIZE/4,
+ .period_bytes_max = DEFAULT_FIFO_SIZE/4,
+ .periods_min = 1,
+ .periods_max = 1024,
+ .buffer_bytes_max = (1024*1024),
+};
+
+/*
+ * audio pcm capture open callback
+ */
+static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int err;
+
+ if (!chip) {
+ printk(KERN_ERR "BUG: cx23885 can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+
+ err = snd_pcm_hw_constraint_pow2(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (err < 0)
+ goto _error;
+
+ chip->substream = substream;
+
+ runtime->hw = snd_cx23885_digital_hw;
+
+ if (chip->dev->sram_channels[AUDIO_SRAM_CHANNEL].fifo_size !=
+ DEFAULT_FIFO_SIZE) {
+ unsigned int bpl = chip->dev->
+ sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 4;
+ bpl &= ~7; /* must be multiple of 8 */
+ runtime->hw.period_bytes_min = bpl;
+ runtime->hw.period_bytes_max = bpl;
+ }
+
+ return 0;
+_error:
+ dprintk(1, "Error opening PCM!\n");
+ return err;
+}
+
+/*
+ * audio close callback
+ */
+static int snd_cx23885_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+/*
+ * hw_params callback
+ */
+static int snd_cx23885_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+ struct videobuf_dmabuf *dma;
+
+ struct cx23885_audio_buffer *buf;
+ int ret;
+
+ if (substream->runtime->dma_area) {
+ dsp_buffer_free(chip);
+ substream->runtime->dma_area = NULL;
+ }
+
+ chip->period_size = params_period_bytes(hw_params);
+ chip->num_periods = params_periods(hw_params);
+ chip->dma_size = chip->period_size * params_periods(hw_params);
+
+ BUG_ON(!chip->dma_size);
+ BUG_ON(chip->num_periods & (chip->num_periods-1));
+
+ buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+ if (NULL == buf)
+ return -ENOMEM;
+
+ buf->bpl = chip->period_size;
+
+ dma = &buf->dma;
+ videobuf_dma_init(dma);
+ ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE,
+ (PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT));
+ if (ret < 0)
+ goto error;
+
+ ret = videobuf_dma_map(&chip->pci->dev, dma);
+ if (ret < 0)
+ goto error;
+
+ ret = cx23885_risc_databuffer(chip->pci, &buf->risc, dma->sglist,
+ chip->period_size, chip->num_periods, 1);
+ if (ret < 0)
+ goto error;
+
+ /* Loop back to start of program */
+ buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC);
+ buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+ buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+ chip->buf = buf;
+ chip->dma_risc = dma;
+
+ substream->runtime->dma_area = chip->dma_risc->vaddr;
+ substream->runtime->dma_bytes = chip->dma_size;
+ substream->runtime->dma_addr = 0;
+
+ return 0;
+
+error:
+ kfree(buf);
+ return ret;
+}
+
+/*
+ * hw free callback
+ */
+static int snd_cx23885_hw_free(struct snd_pcm_substream *substream)
+{
+
+ struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+
+ if (substream->runtime->dma_area) {
+ dsp_buffer_free(chip);
+ substream->runtime->dma_area = NULL;
+ }
+
+ return 0;
+}
+
+/*
+ * prepare callback
+ */
+static int snd_cx23885_prepare(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+/*
+ * trigger callback
+ */
+static int snd_cx23885_card_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+ int err;
+
+ /* Local interrupts are already disabled by ALSA */
+ spin_lock(&chip->lock);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ err = cx23885_start_audio_dma(chip);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ err = cx23885_stop_audio_dma(chip);
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+
+ spin_unlock(&chip->lock);
+
+ return err;
+}
+
+/*
+ * pointer callback
+ */
+static snd_pcm_uframes_t snd_cx23885_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ u16 count;
+
+ count = atomic_read(&chip->count);
+
+ return runtime->period_size * (count & (runtime->periods-1));
+}
+
+/*
+ * page callback (needed for mmap)
+ */
+static struct page *snd_cx23885_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ void *pageptr = substream->runtime->dma_area + offset;
+ return vmalloc_to_page(pageptr);
+}
+
+/*
+ * operators
+ */
+static struct snd_pcm_ops snd_cx23885_pcm_ops = {
+ .open = snd_cx23885_pcm_open,
+ .close = snd_cx23885_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_cx23885_hw_params,
+ .hw_free = snd_cx23885_hw_free,
+ .prepare = snd_cx23885_prepare,
+ .trigger = snd_cx23885_card_trigger,
+ .pointer = snd_cx23885_pointer,
+ .page = snd_cx23885_page,
+};
+
+/*
+ * create a PCM device
+ */
+static int snd_cx23885_pcm(struct cx23885_audio_dev *chip, int device,
+ char *name)
+{
+ int err;
+ struct snd_pcm *pcm;
+
+ err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm);
+ if (err < 0)
+ return err;
+ pcm->private_data = chip;
+ strcpy(pcm->name, name);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx23885_pcm_ops);
+
+ return 0;
+}
+
+/****************************************************************************
+ Basic Flow for Sound Devices
+ ****************************************************************************/
+
+/*
+ * Alsa Constructor - Component probe
+ */
+
+struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
+{
+ struct snd_card *card;
+ struct cx23885_audio_dev *chip;
+ int err;
+
+ if (disable_analog_audio)
+ return NULL;
+
+ if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) {
+ printk(KERN_WARNING "%s(): Missing SRAM channel configuration "
+ "for analog TV Audio\n", __func__);
+ return NULL;
+ }
+
+ err = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+ THIS_MODULE, sizeof(struct cx23885_audio_dev), &card);
+ if (err < 0)
+ goto error;
+
+ chip = (struct cx23885_audio_dev *) card->private_data;
+ chip->dev = dev;
+ chip->pci = dev->pci;
+ chip->card = card;
+ spin_lock_init(&chip->lock);
+
+ snd_card_set_dev(card, &dev->pci->dev);
+
+ err = snd_cx23885_pcm(chip, 0, "CX23885 Digital");
+ if (err < 0)
+ goto error;
+
+ strcpy(card->driver, "CX23885");
+ sprintf(card->shortname, "Conexant CX23885");
+ sprintf(card->longname, "%s at %s", card->shortname, dev->name);
+
+ err = snd_card_register(card);
+ if (err < 0)
+ goto error;
+
+ dprintk(0, "registered ALSA audio device\n");
+
+ return chip;
+
+error:
+ snd_card_free(card);
+ printk(KERN_ERR "%s(): Failed to register analog "
+ "audio adapter\n", __func__);
+
+ return NULL;
+}
+
+/*
+ * ALSA destructor
+ */
+void cx23885_audio_unregister(struct cx23885_dev *dev)
+{
+ struct cx23885_audio_dev *chip = dev->audio_dev;
+
+ snd_card_free(chip->card);
+}
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 76b7563..c3cf089 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -25,8 +25,8 @@
#include <linux/delay.h>
#include <media/cx25840.h>
#include <linux/firmware.h>
+#include <misc/altera.h>
-#include "../../../staging/altera-stapl/altera.h"
#include "cx23885.h"
#include "tuner-xc2028.h"
#include "netup-eeprom.h"
@@ -106,12 +106,14 @@
.vmux = CX25840_VIN7_CH3 |
CX25840_VIN5_CH2 |
CX25840_VIN2_CH1,
+ .amux = CX25840_AUDIO8,
.gpio0 = 0,
}, {
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_VIN7_CH3 |
CX25840_VIN4_CH2 |
CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0,
}, {
.type = CX23885_VMUX_SVIDEO,
@@ -119,6 +121,7 @@
CX25840_VIN4_CH2 |
CX25840_VIN8_CH1 |
CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0,
} },
},
@@ -153,7 +156,30 @@
},
[CX23885_BOARD_HAUPPAUGE_HVR1500] = {
.name = "Hauppauge WinTV-HVR1500",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61, /* 0xc2 >> 1 */
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .gpio0 = 0,
+ } },
},
[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
.name = "Hauppauge WinTV-HVR1200",
@@ -387,6 +413,31 @@
.vmux = CX25840_COMPOSITE1,
} },
},
+ [CX23885_BOARD_MPX885] = {
+ .name = "MPX-885",
+ .porta = CX23885_ANALOG_VIDEO,
+ .input = {{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_COMPOSITE1,
+ .amux = CX25840_AUDIO6,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE2,
+ .vmux = CX25840_COMPOSITE2,
+ .amux = CX25840_AUDIO6,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE3,
+ .vmux = CX25840_COMPOSITE3,
+ .amux = CX25840_AUDIO7,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE4,
+ .vmux = CX25840_COMPOSITE4,
+ .amux = CX25840_AUDIO7,
+ .gpio0 = 0,
+ } },
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -1415,6 +1466,8 @@
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ case CX23885_BOARD_MPX885:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index ee41a88..40e68b2 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -54,7 +54,7 @@
#define dprintk(level, fmt, arg...)\
do { if (debug >= level)\
- printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
+ printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
} while (0)
static unsigned int cx23885_devcount;
@@ -155,12 +155,12 @@
.cnt2_reg = DMA5_CNT2,
},
[SRAM_CH07] = {
- .name = "ch7",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
+ .name = "TV Audio",
+ .cmds_start = 0x10190,
+ .ctrl_start = 0x10480,
+ .cdt = 0x10a00,
+ .fifo_start = 0x7000,
+ .fifo_size = 0x1000,
.ptr1_reg = DMA6_PTR1,
.ptr2_reg = DMA6_PTR2,
.cnt1_reg = DMA6_CNT1,
@@ -1082,10 +1082,10 @@
static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
- unsigned int lines)
+ unsigned int lines, unsigned int lpi)
{
struct scatterlist *sg;
- unsigned int line, todo;
+ unsigned int line, todo, sol;
/* sync instruction */
if (sync_line != NO_SYNC_LINE)
@@ -1098,16 +1098,22 @@
offset -= sg_dma_len(sg);
sg++;
}
+
+ if (lpi && line > 0 && !(line % lpi))
+ sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC;
+ else
+ sol = RISC_SOL;
+
if (bpl <= sg_dma_len(sg)-offset) {
/* fits into current chunk */
- *(rp++) = cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl);
+ *(rp++) = cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl);
*(rp++) = cpu_to_le32(sg_dma_address(sg)+offset);
*(rp++) = cpu_to_le32(0); /* bits 63-32 */
offset += bpl;
} else {
/* scanline needs to be split */
todo = bpl;
- *(rp++) = cpu_to_le32(RISC_WRITE|RISC_SOL|
+ *(rp++) = cpu_to_le32(RISC_WRITE|sol|
(sg_dma_len(sg)-offset));
*(rp++) = cpu_to_le32(sg_dma_address(sg)+offset);
*(rp++) = cpu_to_le32(0); /* bits 63-32 */
@@ -1164,10 +1170,10 @@
rp = risc->cpu;
if (UNSET != top_offset)
rp = cx23885_risc_field(rp, sglist, top_offset, 0,
- bpl, padding, lines);
+ bpl, padding, lines, 0);
if (UNSET != bottom_offset)
rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200,
- bpl, padding, lines);
+ bpl, padding, lines, 0);
/* save pointer to jmp instruction address */
risc->jmp = rp;
@@ -1175,11 +1181,11 @@
return 0;
}
-static int cx23885_risc_databuffer(struct pci_dev *pci,
+int cx23885_risc_databuffer(struct pci_dev *pci,
struct btcx_riscmem *risc,
struct scatterlist *sglist,
unsigned int bpl,
- unsigned int lines)
+ unsigned int lines, unsigned int lpi)
{
u32 instructions;
__le32 *rp;
@@ -1199,7 +1205,8 @@
/* write risc instructions */
rp = risc->cpu;
- rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0, lines);
+ rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE,
+ bpl, 0, lines, lpi);
/* save pointer to jmp instruction address */
risc->jmp = rp;
@@ -1207,6 +1214,54 @@
return 0;
}
+int cx23885_risc_vbibuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+ struct scatterlist *sglist, unsigned int top_offset,
+ unsigned int bottom_offset, unsigned int bpl,
+ unsigned int padding, unsigned int lines)
+{
+ u32 instructions, fields;
+ __le32 *rp;
+ int rc;
+
+ fields = 0;
+ if (UNSET != top_offset)
+ fields++;
+ if (UNSET != bottom_offset)
+ fields++;
+
+ /* estimate risc mem: worst case is one write per page border +
+ one write per scan line + syncs + jump (all 2 dwords). Padding
+ can cause next bpl to start close to a page border. First DMA
+ region may be smaller than PAGE_SIZE */
+ /* write and jump need and extra dword */
+ instructions = fields * (1 + ((bpl + padding) * lines)
+ / PAGE_SIZE + lines);
+ instructions += 2;
+ rc = btcx_riscmem_alloc(pci, risc, instructions*12);
+ if (rc < 0)
+ return rc;
+ /* write risc instructions */
+ rp = risc->cpu;
+
+ /* Sync to line 6, so US CC line 21 will appear in line '12'
+ * in the userland vbi payload */
+ if (UNSET != top_offset)
+ rp = cx23885_risc_field(rp, sglist, top_offset, 6,
+ bpl, padding, lines, 0);
+
+ if (UNSET != bottom_offset)
+ rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x207,
+ bpl, padding, lines, 0);
+
+
+
+ /* save pointer to jmp instruction address */
+ risc->jmp = rp;
+ BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+ return 0;
+}
+
+
int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value)
{
@@ -1517,7 +1572,7 @@
goto fail;
cx23885_risc_databuffer(dev->pci, &buf->risc,
videobuf_to_dma(&buf->vb)->sglist,
- buf->vb.width, buf->vb.height);
+ buf->vb.width, buf->vb.height, 0);
}
buf->vb.state = VIDEOBUF_PREPARED;
return 0;
@@ -1741,15 +1796,19 @@
struct cx23885_tsport *ts2 = &dev->ts2;
u32 pci_status, pci_mask;
u32 vida_status, vida_mask;
+ u32 audint_status, audint_mask;
u32 ts1_status, ts1_mask;
u32 ts2_status, ts2_mask;
int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
+ int audint_count = 0;
bool subdev_handled;
pci_status = cx_read(PCI_INT_STAT);
pci_mask = cx23885_irq_get_mask(dev);
vida_status = cx_read(VID_A_INT_STAT);
vida_mask = cx_read(VID_A_INT_MSK);
+ audint_status = cx_read(AUDIO_INT_INT_STAT);
+ audint_mask = cx_read(AUDIO_INT_INT_MSK);
ts1_status = cx_read(VID_B_INT_STAT);
ts1_mask = cx_read(VID_B_INT_MSK);
ts2_status = cx_read(VID_C_INT_STAT);
@@ -1759,12 +1818,15 @@
goto out;
vida_count = cx_read(VID_A_GPCNT);
+ audint_count = cx_read(AUD_INT_A_GPCNT);
ts1_count = cx_read(ts1->reg_gpcnt);
ts2_count = cx_read(ts2->reg_gpcnt);
dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n",
pci_status, pci_mask);
dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n",
vida_status, vida_mask, vida_count);
+ dprintk(7, "audint_status: 0x%08x audint_mask: 0x%08x count: 0x%x\n",
+ audint_status, audint_mask, audint_count);
dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n",
ts1_status, ts1_mask, ts1_count);
dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n",
@@ -1861,6 +1923,9 @@
if (vida_status)
handled += cx23885_video_irq(dev, vida_status);
+ if (audint_status)
+ handled += cx23885_audio_irq(dev, audint_status, audint_mask);
+
if (pci_status & PCI_MSK_IR) {
subdev_handled = false;
v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index aa83f07..bcb45be 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -844,7 +844,7 @@
static struct xc2028_ctrl ctl = {
.fname = XC3028L_DEFAULT_FIRMWARE,
.max_len = 64,
- .demod = 5000,
+ .demod = XC3028_FE_DIBCOM52,
/* This is true for all demods with
v36 firmware? */
.type = XC2028_D2633,
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 307ff54..0ff7a9e 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -287,6 +287,7 @@
[0x32 >> 1] = "cx24227",
[0x88 >> 1] = "cx25837",
[0x84 >> 1] = "tda8295",
+ [0x98 >> 1] = "flatiron",
[0xa0 >> 1] = "eeprom",
[0xc0 >> 1] = "tuner/mt2131/tda8275",
[0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028",
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
index c87ac68..a99936e 100644
--- a/drivers/media/video/cx23885/cx23885-reg.h
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -203,6 +203,7 @@
#define SD2_BIAS_CTRL 0x0000000A
#define AMP_BIAS_CTRL 0x0000000C
#define CH_PWR_CTRL1 0x0000000E
+#define FLD_CH_SEL (1 << 3)
#define CH_PWR_CTRL2 0x0000000F
#define DSM_STATUS1 0x00000010
#define DSM_STATUS2 0x00000011
@@ -271,7 +272,9 @@
#define VID_BC_MSK_OPC_ERR (1 << 16)
#define VID_BC_MSK_SYNC (1 << 12)
#define VID_BC_MSK_OF (1 << 8)
+#define VID_BC_MSK_VBI_RISCI2 (1 << 5)
#define VID_BC_MSK_RISCI2 (1 << 4)
+#define VID_BC_MSK_VBI_RISCI1 (1 << 1)
#define VID_BC_MSK_RISCI1 1
#define VID_C_INT_MSK 0x00040040
diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c
index c0b6038..a1154f0 100644
--- a/drivers/media/video/cx23885/cx23885-vbi.c
+++ b/drivers/media/video/cx23885/cx23885-vbi.c
@@ -41,6 +41,12 @@
/* ------------------------------------------------------------------ */
+#define VBI_LINE_LENGTH 1440
+#define NTSC_VBI_START_LINE 10 /* line 10 - 21 */
+#define NTSC_VBI_END_LINE 21
+#define NTSC_VBI_LINES (NTSC_VBI_END_LINE - NTSC_VBI_START_LINE + 1)
+
+
int cx23885_vbi_fmt(struct file *file, void *priv,
struct v4l2_format *f)
{
@@ -49,43 +55,86 @@
if (dev->tvnorm & V4L2_STD_525_60) {
/* ntsc */
- f->fmt.vbi.sampling_rate = 28636363;
+ f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH;
+ f->fmt.vbi.sampling_rate = 27000000;
+ f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+ f->fmt.vbi.offset = 0;
+ f->fmt.vbi.flags = 0;
f->fmt.vbi.start[0] = 10;
- f->fmt.vbi.start[1] = 273;
-
+ f->fmt.vbi.count[0] = 17;
+ f->fmt.vbi.start[1] = 263 + 10 + 1;
+ f->fmt.vbi.count[1] = 17;
} else if (dev->tvnorm & V4L2_STD_625_50) {
/* pal */
f->fmt.vbi.sampling_rate = 35468950;
f->fmt.vbi.start[0] = 7 - 1;
f->fmt.vbi.start[1] = 319 - 1;
}
+
return 0;
}
+/* We're given the Video Interrupt status register.
+ * The cx23885_video_irq() func has already validated
+ * the potential error bits, we just need to
+ * deal with vbi payload and return indication if
+ * we actually processed any payload.
+ */
+int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status)
+{
+ u32 count;
+ int handled = 0;
+
+ if (status & VID_BC_MSK_VBI_RISCI1) {
+ dprintk(1, "%s() VID_BC_MSK_VBI_RISCI1\n", __func__);
+ spin_lock(&dev->slock);
+ count = cx_read(VID_A_GPCNT);
+ cx23885_video_wakeup(dev, &dev->vbiq, count);
+ spin_unlock(&dev->slock);
+ handled++;
+ }
+
+ if (status & VID_BC_MSK_VBI_RISCI2) {
+ dprintk(1, "%s() VID_BC_MSK_VBI_RISCI2\n", __func__);
+ dprintk(2, "stopper vbi\n");
+ spin_lock(&dev->slock);
+ cx23885_restart_vbi_queue(dev, &dev->vbiq);
+ spin_unlock(&dev->slock);
+ handled++;
+ }
+
+ return handled;
+}
+
static int cx23885_start_vbi_dma(struct cx23885_dev *dev,
struct cx23885_dmaqueue *q,
struct cx23885_buffer *buf)
{
+ dprintk(1, "%s()\n", __func__);
+
/* setup fifo + format */
cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02],
buf->vb.width, buf->risc.dma);
/* reset counter */
+ cx_write(VID_A_GPCNT_CTL, 3);
+ cx_write(VID_A_VBI_CTRL, 3);
+ cx_write(VBI_A_GPCNT_CTL, 3);
q->count = 1;
- /* enable irqs */
+ /* enable irq */
cx23885_irq_add_enable(dev, 0x01);
cx_set(VID_A_INT_MSK, 0x000022);
/* start dma */
cx_set(DEV_CNTRL2, (1<<5));
- cx_set(VID_A_DMA_CTL, 0x00000022);
+ cx_set(VID_A_DMA_CTL, 0x22); /* FIFO and RISC enable */
return 0;
}
-static int cx23885_restart_vbi_queue(struct cx23885_dev *dev,
+int cx23885_restart_vbi_queue(struct cx23885_dev *dev,
struct cx23885_dmaqueue *q)
{
struct cx23885_buffer *buf;
@@ -102,7 +151,7 @@
buf = list_entry(item, struct cx23885_buffer, vb.queue);
buf->count = q->count++;
}
- mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+ mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30));
return 0;
}
@@ -113,8 +162,7 @@
struct cx23885_buffer *buf;
unsigned long flags;
- cx23885_sram_channel_dump(dev, &dev->sram_channels[SRAM_CH02]);
-
+ /* Stop the VBI engine */
cx_clear(VID_A_DMA_CTL, 0x22);
spin_lock_irqsave(&dev->slock, flags);
@@ -132,7 +180,7 @@
}
/* ------------------------------------------------------------------ */
-#define VBI_LINE_LENGTH 2048
+#define VBI_LINE_LENGTH 1440
#define VBI_LINE_COUNT 17
static int
@@ -173,7 +221,7 @@
rc = videobuf_iolock(q, &buf->vb, NULL);
if (0 != rc)
goto fail;
- cx23885_risc_buffer(dev->pci, &buf->risc,
+ cx23885_risc_vbibuffer(dev->pci, &buf->risc,
dma->sglist,
0, buf->vb.width * buf->vb.height,
buf->vb.width, 0,
@@ -207,7 +255,7 @@
cx23885_start_vbi_dma(dev, q, buf);
buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++;
- mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+ mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30));
dprintk(2, "[%p/%d] vbi_queue - first active\n",
buf, buf->vb.i);
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 896bb32..e730b92 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -37,6 +37,8 @@
#include "cx23885-ioctl.h"
#include "tuner-xc2028.h"
+#include <media/cx25840.h>
+
MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
@@ -69,14 +71,14 @@
#define dprintk(level, fmt, arg...)\
do { if (video_debug >= level)\
- printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
+ printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
} while (0)
/* ------------------------------------------------------------------- */
/* static data */
#define FORMAT_FLAGS_PACKED 0x01
-
+#if 0
static struct cx23885_fmt formats[] = {
{
.name = "8 bpp, gray",
@@ -130,6 +132,23 @@
.flags = FORMAT_FLAGS_PACKED,
},
};
+#else
+static struct cx23885_fmt formats[] = {
+ {
+#if 0
+ .name = "4:2:2, packed, UYVY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ .flags = FORMAT_FLAGS_PACKED,
+ }, {
+#endif
+ .name = "4:2:2, packed, YUYV",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .depth = 16,
+ .flags = FORMAT_FLAGS_PACKED,
+ }
+};
+#endif
static struct cx23885_fmt *format_by_fourcc(unsigned int fourcc)
{
@@ -139,7 +158,12 @@
if (formats[i].fourcc == fourcc)
return formats+i;
- printk(KERN_ERR "%s(0x%08x) NOT FOUND\n", __func__, fourcc);
+ printk(KERN_ERR "%s(%c%c%c%c) NOT FOUND\n", __func__,
+ (fourcc & 0xff),
+ ((fourcc >> 8) & 0xff),
+ ((fourcc >> 16) & 0xff),
+ ((fourcc >> 24) & 0xff)
+ );
return NULL;
}
@@ -171,7 +195,7 @@
.id = V4L2_CID_CONTRAST,
.name = "Contrast",
.minimum = 0,
- .maximum = 0xff,
+ .maximum = 0x7f,
.step = 1,
.default_value = 0x3f,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -184,10 +208,10 @@
.v = {
.id = V4L2_CID_HUE,
.name = "Hue",
- .minimum = 0,
- .maximum = 0xff,
+ .minimum = -127,
+ .maximum = 128,
.step = 1,
- .default_value = 0x7f,
+ .default_value = 0x0,
.type = V4L2_CTRL_TYPE_INTEGER,
},
.off = 128,
@@ -202,9 +226,9 @@
.id = V4L2_CID_SATURATION,
.name = "Saturation",
.minimum = 0,
- .maximum = 0xff,
+ .maximum = 0x7f,
.step = 1,
- .default_value = 0x7f,
+ .default_value = 0x3f,
.type = V4L2_CTRL_TYPE_INTEGER,
},
.off = 0,
@@ -258,8 +282,8 @@
NULL
};
-static void cx23885_video_wakeup(struct cx23885_dev *dev,
- struct cx23885_dmaqueue *q, u32 count)
+void cx23885_video_wakeup(struct cx23885_dev *dev,
+ struct cx23885_dmaqueue *q, u32 count)
{
struct cx23885_buffer *buf;
int bc;
@@ -393,6 +417,71 @@
mutex_unlock(&dev->lock);
}
+static int cx23885_flatiron_write(struct cx23885_dev *dev, u8 reg, u8 data)
+{
+ /* 8 bit registers, 8 bit values */
+ u8 buf[] = { reg, data };
+
+ struct i2c_msg msg = { .addr = 0x98 >> 1,
+ .flags = 0, .buf = buf, .len = 2 };
+
+ return i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg, 1);
+}
+
+static u8 cx23885_flatiron_read(struct cx23885_dev *dev, u8 reg)
+{
+ /* 8 bit registers, 8 bit values */
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+
+ struct i2c_msg msg[] = {
+ { .addr = 0x98 >> 1, .flags = 0, .buf = b0, .len = 1 },
+ { .addr = 0x98 >> 1, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+ };
+
+ ret = i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg[0], 2);
+ if (ret != 2)
+ printk(KERN_ERR "%s() error\n", __func__);
+
+ return b1[0];
+}
+
+static void cx23885_flatiron_dump(struct cx23885_dev *dev)
+{
+ int i;
+ dprintk(1, "Flatiron dump\n");
+ for (i = 0; i < 0x24; i++) {
+ dprintk(1, "FI[%02x] = %02x\n", i,
+ cx23885_flatiron_read(dev, i));
+ }
+}
+
+static int cx23885_flatiron_mux(struct cx23885_dev *dev, int input)
+{
+ u8 val;
+ dprintk(1, "%s(input = %d)\n", __func__, input);
+
+ if (input == 1)
+ val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) & ~FLD_CH_SEL;
+ else if (input == 2)
+ val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) | FLD_CH_SEL;
+ else
+ return -EINVAL;
+
+ val |= 0x20; /* Enable clock to delta-sigma and dec filter */
+
+ cx23885_flatiron_write(dev, CH_PWR_CTRL1, val);
+
+ /* Wake up */
+ cx23885_flatiron_write(dev, CH_PWR_CTRL2, 0);
+
+ if (video_debug)
+ cx23885_flatiron_dump(dev);
+
+ return 0;
+}
+
static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
{
dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n",
@@ -413,27 +502,59 @@
v4l2_subdev_call(dev->sd_cx25840, video, s_routing,
INPUT(input)->vmux, 0, 0);
+ if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
+ (dev->board == CX23885_BOARD_MPX885)) {
+ /* Configure audio routing */
+ v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
+ INPUT(input)->amux, 0, 0);
+
+ if (INPUT(input)->amux == CX25840_AUDIO7)
+ cx23885_flatiron_mux(dev, 1);
+ else if (INPUT(input)->amux == CX25840_AUDIO6)
+ cx23885_flatiron_mux(dev, 2);
+ }
+
+ return 0;
+}
+
+static int cx23885_audio_mux(struct cx23885_dev *dev, unsigned int input)
+{
+ dprintk(1, "%s(input=%d)\n", __func__, input);
+
+ /* The baseband video core of the cx23885 has two audio inputs.
+ * LR1 and LR2. In almost every single case so far only HVR1xxx
+ * cards we've only ever supported LR1. Time to support LR2,
+ * which is available via the optional white breakout header on
+ * the board.
+ * We'll use a could of existing enums in the card struct to allow
+ * devs to specify which baseband input they need, or just default
+ * to what we've always used.
+ */
+ if (INPUT(input)->amux == CX25840_AUDIO7)
+ cx23885_flatiron_mux(dev, 1);
+ else if (INPUT(input)->amux == CX25840_AUDIO6)
+ cx23885_flatiron_mux(dev, 2);
+ else {
+ /* Not specifically defined, assume the default. */
+ cx23885_flatiron_mux(dev, 1);
+ }
+
return 0;
}
/* ------------------------------------------------------------------ */
-static int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width,
- unsigned int height, enum v4l2_field field)
-{
- dprintk(1, "%s()\n", __func__);
- return 0;
-}
-
static int cx23885_start_video_dma(struct cx23885_dev *dev,
struct cx23885_dmaqueue *q,
struct cx23885_buffer *buf)
{
dprintk(1, "%s()\n", __func__);
+ /* Stop the dma/fifo before we tamper with it's risc programs */
+ cx_clear(VID_A_DMA_CTL, 0x11);
+
/* setup fifo + format */
cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01],
buf->bpl, buf->risc.dma);
- cx23885_set_scale(dev, buf->vb.width, buf->vb.height, buf->vb.field);
/* reset counter */
cx_write(VID_A_GPCNT_CTL, 3);
@@ -748,7 +869,7 @@
fh->type = type;
fh->width = 320;
fh->height = 240;
- fh->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24);
+ fh->fmt = format_by_fourcc(V4L2_PIX_FMT_YUYV);
videobuf_queue_sg_init(&fh->vidq, &cx23885_video_qops,
&dev->pci->dev, &dev->slock,
@@ -757,6 +878,14 @@
sizeof(struct cx23885_buffer),
fh, NULL);
+ videobuf_queue_sg_init(&fh->vbiq, &cx23885_vbi_qops,
+ &dev->pci->dev, &dev->slock,
+ V4L2_BUF_TYPE_VBI_CAPTURE,
+ V4L2_FIELD_SEQ_TB,
+ sizeof(struct cx23885_buffer),
+ fh, NULL);
+
+
dprintk(1, "post videobuf_queue_init()\n");
return 0;
@@ -884,8 +1013,9 @@
static int cx23885_set_control(struct cx23885_dev *dev,
struct v4l2_control *ctl)
{
- dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)"
- " (disabled - no action)\n", __func__);
+ dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)\n", __func__);
+ call_all(dev, core, s_ctrl, ctl);
+
return 0;
}
@@ -1059,13 +1189,22 @@
struct cx23885_dev *dev = fh->dev;
dprintk(1, "%s()\n", __func__);
- if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE))
+ if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+ (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))
return -EINVAL;
if (unlikely(i != fh->type))
return -EINVAL;
if (unlikely(!res_get(dev, fh, get_resource(fh))))
return -EBUSY;
+
+ /* Don't start VBI streaming unless vida streaming
+ * has already started.
+ */
+ if ((fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) &&
+ ((cx_read(VID_A_DMA_CTL) & 0x11) == 0))
+ return -EINVAL;
+
return videobuf_streamon(get_queue(fh));
}
@@ -1076,7 +1215,8 @@
int err, res;
dprintk(1, "%s()\n", __func__);
- if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+ (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))
return -EINVAL;
if (i != fh->type)
return -EINVAL;
@@ -1119,7 +1259,7 @@
dprintk(1, "%s()\n", __func__);
n = i->index;
- if (n >= 4)
+ if (n >= MAX_CX23885_INPUT)
return -EINVAL;
if (0 == INPUT(n)->type)
@@ -1133,6 +1273,11 @@
i->type = V4L2_INPUT_TYPE_TUNER;
i->std = CX23885_NORMS;
}
+
+ /* Two selectable audio inputs for non-tv inputs */
+ if (INPUT(n)->type != CX23885_VMUX_TELEVISION)
+ i->audioset = 0x3;
+
return 0;
}
@@ -1159,13 +1304,20 @@
dprintk(1, "%s(%d)\n", __func__, i);
- if (i >= 4) {
+ if (i >= MAX_CX23885_INPUT) {
dprintk(1, "%s() -EINVAL\n", __func__);
return -EINVAL;
}
+ if (INPUT(i)->type == 0)
+ return -EINVAL;
+
mutex_lock(&dev->lock);
cx23885_video_mux(dev, i);
+
+ /* By default establish the default audio input for the card also */
+ /* Caller is free to use VIDIOC_S_AUDIO to override afterwards */
+ cx23885_audio_mux(dev, i);
mutex_unlock(&dev->lock);
return 0;
}
@@ -1185,6 +1337,64 @@
return 0;
}
+static int cx23885_query_audinput(struct file *file, void *priv,
+ struct v4l2_audio *i)
+{
+ struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+ static const char *iname[] = {
+ [0] = "Baseband L/R 1",
+ [1] = "Baseband L/R 2",
+ };
+ unsigned int n;
+ dprintk(1, "%s()\n", __func__);
+
+ n = i->index;
+ if (n >= 2)
+ return -EINVAL;
+
+ memset(i, 0, sizeof(*i));
+ i->index = n;
+ strcpy(i->name, iname[n]);
+ i->capability = V4L2_AUDCAP_STEREO;
+ i->mode = V4L2_AUDMODE_AVL;
+ return 0;
+
+}
+
+static int vidioc_enum_audinput(struct file *file, void *priv,
+ struct v4l2_audio *i)
+{
+ return cx23885_query_audinput(file, priv, i);
+}
+
+static int vidioc_g_audinput(struct file *file, void *priv,
+ struct v4l2_audio *i)
+{
+ struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+ i->index = dev->audinput;
+ dprintk(1, "%s(input=%d)\n", __func__, i->index);
+
+ return cx23885_query_audinput(file, priv, i);
+}
+
+static int vidioc_s_audinput(struct file *file, void *priv,
+ struct v4l2_audio *i)
+{
+ struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+ if (i->index >= 2)
+ return -EINVAL;
+
+ dprintk(1, "%s(%d)\n", __func__, i->index);
+
+ dev->audinput = i->index;
+
+ /* Skip the audio defaults from the cards struct, caller wants
+ * directly touch the audio mux hardware. */
+ cx23885_flatiron_mux(dev, dev->audinput + 1);
+ return 0;
+}
+
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qctrl)
{
@@ -1221,10 +1431,8 @@
return -EINVAL;
strcpy(t->name, "Television");
- t->type = V4L2_TUNER_ANALOG_TV;
- t->capability = V4L2_TUNER_CAP_NORM;
- t->rangehigh = 0xffffffffUL;
- t->signal = 0xffff ; /* LOCKED */
+
+ call_all(dev, tuner, g_tuner, t);
return 0;
}
@@ -1237,6 +1445,9 @@
return -EINVAL;
if (0 != t->index)
return -EINVAL;
+ /* Update the A/V core */
+ call_all(dev, tuner, s_tuner, t);
+
return 0;
}
@@ -1302,10 +1513,6 @@
struct cx23885_buffer *buf;
unsigned long flags;
- cx23885_sram_channel_dump(dev, &dev->sram_channels[SRAM_CH01]);
-
- cx_clear(VID_A_DMA_CTL, 0x11);
-
spin_lock_irqsave(&dev->slock, flags);
while (!list_empty(&q->active)) {
buf = list_entry(q->active.next,
@@ -1313,7 +1520,7 @@
list_del(&buf->vb.queue);
buf->vb.state = VIDEOBUF_ERROR;
wake_up(&buf->vb.done);
- printk(KERN_ERR "%s/0: [%p/%d] timeout - dma=0x%08lx\n",
+ printk(KERN_ERR "%s: [%p/%d] timeout - dma=0x%08lx\n",
dev->name, buf, buf->vb.i,
(unsigned long)buf->risc.dma);
}
@@ -1329,27 +1536,43 @@
mask = cx_read(VID_A_INT_MSK);
if (0 == (status & mask))
return handled;
+
cx_write(VID_A_INT_STAT, status);
- dprintk(2, "%s() status = 0x%08x\n", __func__, status);
- /* risc op code error */
- if (status & (1 << 16)) {
- printk(KERN_WARNING "%s/0: video risc op code error\n",
- dev->name);
- cx_clear(VID_A_DMA_CTL, 0x11);
- cx23885_sram_channel_dump(dev, &dev->sram_channels[SRAM_CH01]);
+ /* risc op code error, fifo overflow or line sync detection error */
+ if ((status & VID_BC_MSK_OPC_ERR) ||
+ (status & VID_BC_MSK_SYNC) ||
+ (status & VID_BC_MSK_OF)) {
+
+ if (status & VID_BC_MSK_OPC_ERR) {
+ dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n",
+ VID_BC_MSK_OPC_ERR);
+ printk(KERN_WARNING "%s: video risc op code error\n",
+ dev->name);
+ cx23885_sram_channel_dump(dev,
+ &dev->sram_channels[SRAM_CH01]);
+ }
+
+ if (status & VID_BC_MSK_SYNC)
+ dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) "
+ "video lines miss-match\n",
+ VID_BC_MSK_SYNC);
+
+ if (status & VID_BC_MSK_OF)
+ dprintk(7, " (VID_BC_MSK_OF 0x%08x) fifo overflow\n",
+ VID_BC_MSK_OF);
+
}
- /* risc1 y */
- if (status & 0x01) {
+ /* Video */
+ if (status & VID_BC_MSK_RISCI1) {
spin_lock(&dev->slock);
count = cx_read(VID_A_GPCNT);
cx23885_video_wakeup(dev, &dev->vidq, count);
spin_unlock(&dev->slock);
handled++;
}
- /* risc2 y */
- if (status & 0x10) {
+ if (status & VID_BC_MSK_RISCI2) {
dprintk(2, "stopper video\n");
spin_lock(&dev->slock);
cx23885_restart_video_queue(dev, &dev->vidq);
@@ -1357,6 +1580,9 @@
handled++;
}
+ /* Allow the VBI framework to process it's payload */
+ handled += cx23885_vbi_irq(dev, status);
+
return handled;
}
@@ -1405,6 +1631,9 @@
.vidioc_g_register = cx23885_g_register,
.vidioc_s_register = cx23885_s_register,
#endif
+ .vidioc_enumaudio = vidioc_enum_audinput,
+ .vidioc_g_audio = vidioc_g_audinput,
+ .vidioc_s_audio = vidioc_s_audinput,
};
static struct video_device cx23885_vbi_template;
@@ -1429,6 +1658,14 @@
dprintk(1, "%s()\n", __func__);
cx23885_irq_remove(dev, 0x01);
+ if (dev->vbi_dev) {
+ if (video_is_registered(dev->vbi_dev))
+ video_unregister_device(dev->vbi_dev);
+ else
+ video_device_release(dev->vbi_dev);
+ dev->vbi_dev = NULL;
+ btcx_riscmem_free(dev->pci, &dev->vbiq.stopper);
+ }
if (dev->video_dev) {
if (video_is_registered(dev->video_dev))
video_unregister_device(dev->video_dev);
@@ -1438,6 +1675,9 @@
btcx_riscmem_free(dev->pci, &dev->vidq.stopper);
}
+
+ if (dev->audio_dev)
+ cx23885_audio_unregister(dev);
}
int cx23885_video_register(struct cx23885_dev *dev)
@@ -1463,7 +1703,14 @@
cx23885_risc_stopper(dev->pci, &dev->vidq.stopper,
VID_A_DMA_CTL, 0x11, 0x00);
- /* Don't enable VBI yet */
+ /* init vbi dma queues */
+ INIT_LIST_HEAD(&dev->vbiq.active);
+ INIT_LIST_HEAD(&dev->vbiq.queued);
+ dev->vbiq.timeout.function = cx23885_vbi_timeout;
+ dev->vbiq.timeout.data = (unsigned long)dev;
+ init_timer(&dev->vbiq.timeout);
+ cx23885_risc_stopper(dev->pci, &dev->vbiq.stopper,
+ VID_A_DMA_CTL, 0x22, 0x00);
cx23885_irq_add_enable(dev, 0x01);
@@ -1504,8 +1751,7 @@
}
}
-
- /* register v4l devices */
+ /* register Video device */
dev->video_dev = cx23885_vdev_init(dev, dev->pci,
&cx23885_video_template, "video");
err = video_register_device(dev->video_dev, VFL_TYPE_GRABBER,
@@ -1515,13 +1761,31 @@
dev->name);
goto fail_unreg;
}
- printk(KERN_INFO "%s/0: registered device %s [v4l2]\n",
+ printk(KERN_INFO "%s: registered device %s [v4l2]\n",
dev->name, video_device_node_name(dev->video_dev));
+
+ /* register VBI device */
+ dev->vbi_dev = cx23885_vdev_init(dev, dev->pci,
+ &cx23885_vbi_template, "vbi");
+ err = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+ vbi_nr[dev->nr]);
+ if (err < 0) {
+ printk(KERN_INFO "%s: can't register vbi device\n",
+ dev->name);
+ goto fail_unreg;
+ }
+ printk(KERN_INFO "%s: registered device %s\n",
+ dev->name, video_device_node_name(dev->vbi_dev));
+
+ /* Register ALSA audio device */
+ dev->audio_dev = cx23885_audio_register(dev);
+
/* initial device configuration */
mutex_lock(&dev->lock);
cx23885_set_tvnorm(dev, dev->tvnorm);
init_controls(dev);
cx23885_video_mux(dev, 0);
+ cx23885_audio_mux(dev, 0);
mutex_unlock(&dev->lock);
return 0;
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index d86bc0b..b49036f 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -86,6 +86,7 @@
#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29
#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30
#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31
+#define CX23885_BOARD_MPX885 32
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
@@ -192,6 +193,7 @@
struct cx23885_input {
enum cx23885_itype type;
unsigned int vmux;
+ unsigned int amux;
u32 gpio0, gpio1, gpio2, gpio3;
};
@@ -318,6 +320,34 @@
struct rc_dev *rc;
};
+struct cx23885_audio_buffer {
+ unsigned int bpl;
+ struct btcx_riscmem risc;
+ struct videobuf_dmabuf dma;
+};
+
+struct cx23885_audio_dev {
+ struct cx23885_dev *dev;
+
+ struct pci_dev *pci;
+
+ struct snd_card *card;
+
+ spinlock_t lock;
+
+ atomic_t count;
+
+ unsigned int dma_size;
+ unsigned int period_size;
+ unsigned int num_periods;
+
+ struct videobuf_dmabuf *dma_risc;
+
+ struct cx23885_audio_buffer *buf;
+
+ struct snd_pcm_substream *substream;
+};
+
struct cx23885_dev {
atomic_t refcount;
struct v4l2_device v4l2_dev;
@@ -362,6 +392,7 @@
/* Analog video */
u32 resources;
unsigned int input;
+ unsigned int audinput; /* Selectable audio input */
u32 tvaudio;
v4l2_std_id tvnorm;
unsigned int tuner_type;
@@ -400,6 +431,9 @@
atomic_t v4l_reader_count;
struct cx23885_tvnorm encodernorm;
+ /* Analog raw audio */
+ struct cx23885_audio_dev *audio_dev;
+
};
static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev)
@@ -478,6 +512,11 @@
unsigned int top_offset, unsigned int bottom_offset,
unsigned int bpl, unsigned int padding, unsigned int lines);
+extern int cx23885_risc_vbibuffer(struct pci_dev *pci,
+ struct btcx_riscmem *risc, struct scatterlist *sglist,
+ unsigned int top_offset, unsigned int bottom_offset,
+ unsigned int bpl, unsigned int padding, unsigned int lines);
+
void cx23885_cancel_buffers(struct cx23885_tsport *port);
extern int cx23885_restart_queue(struct cx23885_tsport *port,
@@ -533,6 +572,8 @@
extern int cx23885_video_register(struct cx23885_dev *dev);
extern void cx23885_video_unregister(struct cx23885_dev *dev);
extern int cx23885_video_irq(struct cx23885_dev *dev, u32 status);
+extern void cx23885_video_wakeup(struct cx23885_dev *dev,
+ struct cx23885_dmaqueue *q, u32 count);
/* ----------------------------------------------------------- */
/* cx23885-vbi.c */
@@ -540,6 +581,9 @@
struct v4l2_format *f);
extern void cx23885_vbi_timeout(unsigned long data);
extern struct videobuf_queue_ops cx23885_vbi_qops;
+extern int cx23885_restart_vbi_queue(struct cx23885_dev *dev,
+ struct cx23885_dmaqueue *q);
+extern int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status);
/* cx23885-i2c.c */
extern int cx23885_i2c_register(struct cx23885_i2c *bus);
@@ -563,6 +607,18 @@
extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask);
extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput);
+/* ----------------------------------------------------------- */
+/* cx23885-alsa.c */
+extern struct cx23885_audio_dev *cx23885_audio_register(
+ struct cx23885_dev *dev);
+extern void cx23885_audio_unregister(struct cx23885_dev *dev);
+extern int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask);
+extern int cx23885_risc_databuffer(struct pci_dev *pci,
+ struct btcx_riscmem *risc,
+ struct scatterlist *sglist,
+ unsigned int bpl,
+ unsigned int lines,
+ unsigned int lpi);
/* ----------------------------------------------------------- */
/* tv norms */
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index e37be6f..bb1ce34 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -673,7 +673,7 @@
unsigned int i, n;
union cx23888_ir_fifo_rec *p;
- unsigned u, v;
+ unsigned u, v, w;
n = count / sizeof(union cx23888_ir_fifo_rec)
* sizeof(union cx23888_ir_fifo_rec);
@@ -692,11 +692,12 @@
if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
/* Assume RTO was because of no IR light input */
u = 0;
- v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
+ w = 1;
} else {
u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
if (invert)
u = u ? 0 : 1;
+ w = 0;
}
v = (unsigned) pulse_width_count_to_ns(
@@ -707,9 +708,12 @@
init_ir_raw_event(&p->ir_core_data);
p->ir_core_data.pulse = u;
p->ir_core_data.duration = v;
+ p->ir_core_data.timeout = w;
- v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s\n",
- v, u ? "mark" : "space");
+ v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s %s\n",
+ v, u ? "mark" : "space", w ? "(timed out)" : "");
+ if (w)
+ v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
}
return 0;
}
diff --git a/drivers/media/video/cx25840/Makefile b/drivers/media/video/cx25840/Makefile
index 2ee96d3..dc40dde 100644
--- a/drivers/media/video/cx25840/Makefile
+++ b/drivers/media/video/cx25840/Makefile
@@ -3,4 +3,4 @@
obj-$(CONFIG_VIDEO_CX25840) += cx25840.o
-EXTRA_CFLAGS += -Idrivers/media/video
+ccflags-y += -Idrivers/media/video
diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c
index 34b96c7..005f110 100644
--- a/drivers/media/video/cx25840/cx25840-audio.c
+++ b/drivers/media/video/cx25840/cx25840-audio.c
@@ -480,6 +480,7 @@
static void set_volume(struct i2c_client *client, int volume)
{
+ struct cx25840_state *state = to_state(i2c_get_clientdata(client));
int vol;
/* Convert the volume to msp3400 values (0-127) */
@@ -495,7 +496,14 @@
}
/* PATH1_VOLUME */
- cx25840_write(client, 0x8d4, 228 - (vol * 2));
+ if (is_cx2388x(state)) {
+ /* for cx23885 volume doesn't work,
+ * the calculation always results in
+ * e4 regardless.
+ */
+ cx25840_write(client, 0x8d4, volume);
+ } else
+ cx25840_write(client, 0x8d4, 228 - (vol * 2));
}
static void set_balance(struct i2c_client *client, int balance)
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index b7ee2ae..cd99764 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -702,6 +702,13 @@
/* start microcontroller */
cx25840_and_or(client, 0x803, ~0x10, 0x10);
+
+ /* CC raw enable */
+ cx25840_write(client, 0x404, 0x0b);
+
+ /* CC on */
+ cx25840_write(client, 0x42f, 0x66);
+ cx25840_write4(client, 0x474, 0x1e1e601a);
}
/* ----------------------------------------------------------------------- */
@@ -1067,6 +1074,18 @@
cx25840_write(client, 0x919, 0x01);
}
+ if (is_cx2388x(state) && ((aud_input == CX25840_AUDIO7) ||
+ (aud_input == CX25840_AUDIO6))) {
+ /* Configure audio from LR1 or LR2 input */
+ cx25840_write4(client, 0x910, 0);
+ cx25840_write4(client, 0x8d0, 0x63073);
+ } else
+ if (is_cx2388x(state) && (aud_input == CX25840_AUDIO8)) {
+ /* Configure audio from tuner/sif input */
+ cx25840_write4(client, 0x910, 0x12b000c9);
+ cx25840_write4(client, 0x8d0, 0x1f063870);
+ }
+
return 0;
}
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 7eb79af..b718a3a 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -668,7 +668,7 @@
u16 divider;
unsigned int i, n;
union cx25840_ir_fifo_rec *p;
- unsigned u, v;
+ unsigned u, v, w;
if (ir_state == NULL)
return -ENODEV;
@@ -694,11 +694,12 @@
if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
/* Assume RTO was because of no IR light input */
u = 0;
- v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
+ w = 1;
} else {
u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
if (invert)
u = u ? 0 : 1;
+ w = 0;
}
v = (unsigned) pulse_width_count_to_ns(
@@ -709,9 +710,12 @@
init_ir_raw_event(&p->ir_core_data);
p->ir_core_data.pulse = u;
p->ir_core_data.duration = v;
+ p->ir_core_data.timeout = w;
- v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s\n",
- v, u ? "mark" : "space");
+ v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s %s\n",
+ v, u ? "mark" : "space", w ? "(timed out)" : "");
+ if (w)
+ v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
}
return 0;
}
diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile
index 5b7e267..c1a2785 100644
--- a/drivers/media/video/cx88/Makefile
+++ b/drivers/media/video/cx88/Makefile
@@ -10,7 +10,7 @@
obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o
obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index fbcaa1c..fbfdd80 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -636,9 +636,6 @@
cx_write(MO_PCI_INTSTAT, 0xFFFFFFFF); // Clear PCI int
cx_write(MO_INT1_STAT, 0xFFFFFFFF); // Clear RISC int
- /* set default notch filter */
- cx_andor(MO_HTOTAL, 0x1800, (HLNotchFilter4xFsc << 11));
-
/* Reset on-board parts */
cx_write(MO_SRST_IO, 0);
msleep(10);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 60d28fd..921c56d 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -266,7 +266,7 @@
.id = V4L2_CID_BAND_STOP_FILTER,
.name = "Notch filter",
.minimum = 0,
- .maximum = 3,
+ .maximum = 1,
.step = 1,
.default_value = 0x0,
.type = V4L2_CTRL_TYPE_INTEGER,
diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/video/davinci/vpbe_display.c
index 7f1d83a..8588a86 100644
--- a/drivers/media/video/davinci/vpbe_display.c
+++ b/drivers/media/video/davinci/vpbe_display.c
@@ -43,7 +43,6 @@
static int debug;
-#define VPBE_DISPLAY_SD_BUF_SIZE (720*576*2)
#define VPBE_DEFAULT_NUM_BUFS 3
module_param(debug, int, 0644);
diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/video/davinci/vpbe_osd.c
index 5352884..ceccf43 100644
--- a/drivers/media/video/davinci/vpbe_osd.c
+++ b/drivers/media/video/davinci/vpbe_osd.c
@@ -1162,7 +1162,7 @@
goto free_mem;
}
osd->osd_base_phys = res->start;
- osd->osd_size = res->end - res->start + 1;
+ osd->osd_size = resource_size(res);
if (!request_mem_region(osd->osd_base_phys, osd->osd_size,
MODULE_NAME)) {
dev_err(osd->dev, "Unable to reserve OSD MMIO region\n");
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 281ee42..f6f622e 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -41,6 +41,8 @@
select DVB_CXD2820R if !DVB_FE_CUSTOMISE
select DVB_DRXK if !DVB_FE_CUSTOMISE
select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
+ select DVB_TDA10071 if !DVB_FE_CUSTOMISE
+ select DVB_A8293 if !DVB_FE_CUSTOMISE
select VIDEOBUF_DVB
---help---
This adds support for DVB cards based on the
diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile
index 38aaa00..2abdf76 100644
--- a/drivers/media/video/em28xx/Makefile
+++ b/drivers/media/video/em28xx/Makefile
@@ -9,8 +9,8 @@
obj-$(CONFIG_VIDEO_EM28XX_ALSA) += em28xx-alsa.o
obj-$(CONFIG_VIDEO_EM28XX_DVB) += em28xx-dvb.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 3e3959f..4240f0b 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -60,7 +60,7 @@
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
-/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
+/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
static unsigned long em28xx_devused;
struct em28xx_hash_table {
@@ -317,6 +317,25 @@
};
#endif
+/* 2013:024f PCTV DVB-S2 Stick 460e
+ * GPIO_0 - POWER_ON
+ * GPIO_1 - BOOST
+ * GPIO_2 - VUV_LNB (red LED)
+ * GPIO_3 - EXT_12V
+ * GPIO_4 - INT_DEM (DEMOD GPIO_0)
+ * GPIO_5 - INT_LNB
+ * GPIO_6 - RESET_DEM
+ * GPIO_7 - LED (green LED)
+ */
+static struct em28xx_reg_seq pctv_460e[] = {
+ {EM2874_R80_GPIO, 0x01, 0xff, 50},
+ {0x0d, 0xff, 0xff, 50},
+ {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
+ {0x0d, 0x42, 0xff, 50},
+ {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
*/
@@ -1810,6 +1829,17 @@
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
+ /* 2013:024f PCTV DVB-S2 Stick 460e
+ * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
+ [EM28174_BOARD_PCTV_460E] = {
+ .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .name = "PCTV DVB-S2 Stick (460e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_460e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1941,6 +1971,8 @@
.driver_info = EM2870_BOARD_KWORLD_A340 },
{ USB_DEVICE(0x2013, 0x024f),
.driver_info = EM28174_BOARD_PCTV_290E },
+ { USB_DEVICE(0x2013, 0x024c),
+ .driver_info = EM28174_BOARD_PCTV_460E },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@@ -2768,9 +2800,9 @@
#endif /* CONFIG_MODULES */
/*
- * em28xx_realease_resources()
+ * em28xx_release_resources()
* unregisters the v4l2,i2c and usb devices
- * called when the device gets disconected or at module unload
+ * called when the device gets disconnected or at module unload
*/
void em28xx_release_resources(struct em28xx *dev)
{
@@ -2784,8 +2816,6 @@
em28xx_release_analog_resources(dev);
- em28xx_remove_from_devlist(dev);
-
em28xx_i2c_unregister(dev);
v4l2_device_unregister(&dev->v4l2_dev);
@@ -2793,7 +2823,7 @@
usb_put_dev(dev->udev);
/* Mark device as unused */
- em28xx_devused &= ~(1 << dev->devno);
+ clear_bit(dev->devno, &em28xx_devused);
};
/*
@@ -2806,7 +2836,6 @@
{
struct em28xx *dev = *devhandle;
int retval;
- int errCode;
dev->udev = udev;
mutex_init(&dev->ctrl_urb_lock);
@@ -2883,10 +2912,9 @@
}
if (dev->is_audio_only) {
- errCode = em28xx_audio_setup(dev);
- if (errCode)
+ retval = em28xx_audio_setup(dev);
+ if (retval)
return -ENODEV;
- em28xx_add_into_devlist(dev);
em28xx_init_extension(dev);
return 0;
@@ -2903,7 +2931,7 @@
/* Resets I2C speed */
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
if (retval < 0) {
- em28xx_errdev("%s: em28xx_write_regs_req failed!"
+ em28xx_errdev("%s: em28xx_write_reg failed!"
" retval [%d]\n",
__func__, retval);
return retval;
@@ -2917,12 +2945,11 @@
}
/* register i2c bus */
- errCode = em28xx_i2c_register(dev);
- if (errCode < 0) {
- v4l2_device_unregister(&dev->v4l2_dev);
- em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
- __func__, errCode);
- return errCode;
+ retval = em28xx_i2c_register(dev);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
+ __func__, retval);
+ goto unregister_dev;
}
/*
@@ -2936,11 +2963,11 @@
em28xx_card_setup(dev);
/* Configure audio */
- errCode = em28xx_audio_setup(dev);
- if (errCode < 0) {
- v4l2_device_unregister(&dev->v4l2_dev);
- em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
- __func__, errCode);
+ retval = em28xx_audio_setup(dev);
+ if (retval < 0) {
+ em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
+ __func__, retval);
+ goto fail;
}
/* wake i2c devices */
@@ -2954,41 +2981,41 @@
if (dev->board.has_msp34xx) {
/* Send a reset to other chips via gpio */
- errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
- if (errCode < 0) {
- em28xx_errdev("%s: em28xx_write_regs_req - "
- "msp34xx(1) failed! errCode [%d]\n",
- __func__, errCode);
- return errCode;
+ retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - "
+ "msp34xx(1) failed! error [%d]\n",
+ __func__, retval);
+ goto fail;
}
msleep(3);
- errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
- if (errCode < 0) {
- em28xx_errdev("%s: em28xx_write_regs_req - "
- "msp34xx(2) failed! errCode [%d]\n",
- __func__, errCode);
- return errCode;
+ retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - "
+ "msp34xx(2) failed! error [%d]\n",
+ __func__, retval);
+ goto fail;
}
msleep(3);
}
- em28xx_add_into_devlist(dev);
-
retval = em28xx_register_analog_devices(dev);
if (retval < 0) {
- em28xx_release_resources(dev);
- goto fail_reg_devices;
+ goto fail;
}
- em28xx_init_extension(dev);
-
/* Save some power by putting tuner to sleep */
v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
return 0;
-fail_reg_devices:
+fail:
+ em28xx_i2c_unregister(dev);
+
+unregister_dev:
+ v4l2_device_unregister(&dev->v4l2_dev);
+
return retval;
}
@@ -3015,8 +3042,16 @@
udev = usb_get_dev(interface_to_usbdev(interface));
/* Check to see next free device and mark as used */
- nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
- em28xx_devused |= 1<<nr;
+ do {
+ nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
+ if (nr >= EM28XX_MAXBOARDS) {
+ /* No free device slots */
+ printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
+ EM28XX_MAXBOARDS);
+ retval = -ENOMEM;
+ goto err_no_slot;
+ }
+ } while (test_and_set_bit(nr, &em28xx_devused));
/* Don't register audio interfaces */
if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
@@ -3027,7 +3062,6 @@
ifnum,
interface->altsetting[0].desc.bInterfaceClass);
- em28xx_devused &= ~(1<<nr);
retval = -ENODEV;
goto err;
}
@@ -3076,7 +3110,6 @@
em28xx_err(DRIVER_NAME " This is an anciliary "
"interface not used by the driver\n");
- em28xx_devused &= ~(1<<nr);
retval = -ENODEV;
goto err;
}
@@ -3132,29 +3165,19 @@
printk(DRIVER_NAME ": Device initialization failed.\n");
printk(DRIVER_NAME ": Device must be connected to a high-speed"
" USB 2.0 port.\n");
- em28xx_devused &= ~(1<<nr);
retval = -ENODEV;
goto err;
}
- if (nr >= EM28XX_MAXBOARDS) {
- printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
- EM28XX_MAXBOARDS);
- em28xx_devused &= ~(1<<nr);
- retval = -ENOMEM;
- goto err;
- }
-
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
em28xx_err(DRIVER_NAME ": out of memory!\n");
- em28xx_devused &= ~(1<<nr);
retval = -ENOMEM;
goto err;
}
- snprintf(dev->name, 29, "em28xx #%d", nr);
+ snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
dev->devno = nr;
dev->model = id->driver_info;
dev->alt = -1;
@@ -3177,7 +3200,6 @@
if (dev->alt_max_pkt_size == NULL) {
em28xx_errdev("out of memory!\n");
- em28xx_devused &= ~(1<<nr);
kfree(dev);
retval = -ENOMEM;
goto err;
@@ -3204,8 +3226,8 @@
mutex_lock(&dev->lock);
retval = em28xx_init_dev(&dev, udev, interface, nr);
if (retval) {
- em28xx_devused &= ~(1<<dev->devno);
mutex_unlock(&dev->lock);
+ kfree(dev->alt_max_pkt_size);
kfree(dev);
goto err;
}
@@ -3217,15 +3239,26 @@
*/
mutex_unlock(&dev->lock);
+ /*
+ * These extensions can be modules. If the modules are already
+ * loaded then we can initialise the device now, otherwise we
+ * will initialise it when the modules load instead.
+ */
+ em28xx_init_extension(dev);
+
return 0;
err:
+ clear_bit(nr, &em28xx_devused);
+
+err_no_slot:
+ usb_put_dev(udev);
return retval;
}
/*
* em28xx_usb_disconnect()
- * called when the device gets diconencted
+ * called when the device gets disconnected
* video device will be unregistered on v4l2_close in case it is still open
*/
static void em28xx_usb_disconnect(struct usb_interface *interface)
@@ -3273,10 +3306,10 @@
em28xx_release_resources(dev);
}
- em28xx_close_extension(dev);
-
mutex_unlock(&dev->lock);
+ em28xx_close_extension(dev);
+
if (!dev->users) {
kfree(dev->alt_max_pkt_size);
kfree(dev);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 57b1b5c..804a4ab 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -1184,25 +1184,6 @@
static DEFINE_MUTEX(em28xx_devlist_mutex);
/*
- * em28xx_realease_resources()
- * unregisters the v4l2,i2c and usb devices
- * called when the device gets disconected or at module unload
-*/
-void em28xx_remove_from_devlist(struct em28xx *dev)
-{
- mutex_lock(&em28xx_devlist_mutex);
- list_del(&dev->devlist);
- mutex_unlock(&em28xx_devlist_mutex);
-};
-
-void em28xx_add_into_devlist(struct em28xx *dev)
-{
- mutex_lock(&em28xx_devlist_mutex);
- list_add_tail(&dev->devlist, &em28xx_devlist);
- mutex_unlock(&em28xx_devlist_mutex);
-};
-
-/*
* Extension interface
*/
@@ -1217,8 +1198,8 @@
list_for_each_entry(dev, &em28xx_devlist, devlist) {
ops->init(dev);
}
- printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_devlist_mutex);
+ printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
@@ -1231,36 +1212,34 @@
list_for_each_entry(dev, &em28xx_devlist, devlist) {
ops->fini(dev);
}
- printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&em28xx_devlist_mutex);
+ printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
}
EXPORT_SYMBOL(em28xx_unregister_extension);
void em28xx_init_extension(struct em28xx *dev)
{
- struct em28xx_ops *ops = NULL;
+ const struct em28xx_ops *ops = NULL;
mutex_lock(&em28xx_devlist_mutex);
- if (!list_empty(&em28xx_extension_devlist)) {
- list_for_each_entry(ops, &em28xx_extension_devlist, next) {
- if (ops->init)
- ops->init(dev);
- }
+ list_add_tail(&dev->devlist, &em28xx_devlist);
+ list_for_each_entry(ops, &em28xx_extension_devlist, next) {
+ if (ops->init)
+ ops->init(dev);
}
mutex_unlock(&em28xx_devlist_mutex);
}
void em28xx_close_extension(struct em28xx *dev)
{
- struct em28xx_ops *ops = NULL;
+ const struct em28xx_ops *ops = NULL;
mutex_lock(&em28xx_devlist_mutex);
- if (!list_empty(&em28xx_extension_devlist)) {
- list_for_each_entry(ops, &em28xx_extension_devlist, next) {
- if (ops->fini)
- ops->fini(dev);
- }
+ list_for_each_entry(ops, &em28xx_extension_devlist, next) {
+ if (ops->fini)
+ ops->fini(dev);
}
+ list_del(&dev->devlist);
mutex_unlock(&em28xx_devlist_mutex);
}
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index e5916de..cef7a2d 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -42,6 +42,8 @@
#include "cxd2820r.h"
#include "tda18271c2dd.h"
#include "drxk.h"
+#include "tda10071.h"
+#include "a8293.h"
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -122,7 +124,7 @@
}
}
-static inline int dvb_isoc_copy(struct em28xx *dev, struct urb *urb)
+static inline int em28xx_dvb_isoc_copy(struct em28xx *dev, struct urb *urb)
{
int i;
@@ -155,7 +157,7 @@
return 0;
}
-static int start_streaming(struct em28xx_dvb *dvb)
+static int em28xx_start_streaming(struct em28xx_dvb *dvb)
{
int rc;
struct em28xx *dev = dvb->adapter.priv;
@@ -175,10 +177,10 @@
return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
EM28XX_DVB_NUM_BUFS, max_dvb_packet_size,
- dvb_isoc_copy);
+ em28xx_dvb_isoc_copy);
}
-static int stop_streaming(struct em28xx_dvb *dvb)
+static int em28xx_stop_streaming(struct em28xx_dvb *dvb)
{
struct em28xx *dev = dvb->adapter.priv;
@@ -189,7 +191,7 @@
return 0;
}
-static int start_feed(struct dvb_demux_feed *feed)
+static int em28xx_start_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct em28xx_dvb *dvb = demux->priv;
@@ -203,7 +205,7 @@
rc = dvb->nfeeds;
if (dvb->nfeeds == 1) {
- ret = start_streaming(dvb);
+ ret = em28xx_start_streaming(dvb);
if (ret < 0)
rc = ret;
}
@@ -212,7 +214,7 @@
return rc;
}
-static int stop_feed(struct dvb_demux_feed *feed)
+static int em28xx_stop_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct em28xx_dvb *dvb = demux->priv;
@@ -222,7 +224,7 @@
dvb->nfeeds--;
if (0 == dvb->nfeeds)
- err = stop_streaming(dvb);
+ err = em28xx_stop_streaming(dvb);
mutex_unlock(&dvb->lock);
return err;
@@ -380,7 +382,7 @@
em28xx_gpio_set(dev, terratec_h5_end);
};
-static int mt352_terratec_xs_init(struct dvb_frontend *fe)
+static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe)
{
/* Values extracted from a USB trace of the Terratec Windows driver */
static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c };
@@ -412,7 +414,7 @@
.demod_address = (0x1e >> 1),
.no_tuner = 1,
.if2 = 45600,
- .demod_init = mt352_terratec_xs_init,
+ .demod_init = em28xx_mt352_terratec_xs_init,
};
static struct tda10023_config em28xx_tda10023_config = {
@@ -438,11 +440,25 @@
static struct tda18271_config em28xx_cxd2820r_tda18271_config = {
.output_opt = TDA18271_OUTPUT_LT_OFF,
+ .gate = TDA18271_GATE_DIGITAL,
+};
+
+static const struct tda10071_config em28xx_tda10071_config = {
+ .i2c_address = 0x55, /* (0xaa >> 1) */
+ .i2c_wr_max = 64,
+ .ts_mode = TDA10071_TS_SERIAL,
+ .spec_inv = 0,
+ .xtal = 40444000, /* 40.444 MHz */
+ .pll_multiplier = 20,
+};
+
+static const struct a8293_config em28xx_a8293_config = {
+ .i2c_addr = 0x08, /* (0x10 >> 1) */
};
/* ------------------------------------------------------------------ */
-static int attach_xc3028(u8 addr, struct em28xx *dev)
+static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
{
struct dvb_frontend *fe;
struct xc2028_config cfg;
@@ -472,10 +488,8 @@
/* ------------------------------------------------------------------ */
-static int register_dvb(struct em28xx_dvb *dvb,
- struct module *module,
- struct em28xx *dev,
- struct device *device)
+static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module,
+ struct em28xx *dev, struct device *device)
{
int result;
@@ -522,8 +536,8 @@
dvb->demux.priv = dvb;
dvb->demux.filternum = 256;
dvb->demux.feednum = 256;
- dvb->demux.start_feed = start_feed;
- dvb->demux.stop_feed = stop_feed;
+ dvb->demux.start_feed = em28xx_start_feed;
+ dvb->demux.stop_feed = em28xx_stop_feed;
result = dvb_dmx_init(&dvb->demux);
if (result < 0) {
@@ -591,7 +605,7 @@
return result;
}
-static void unregister_dvb(struct em28xx_dvb *dvb)
+static void em28xx_unregister_dvb(struct em28xx_dvb *dvb)
{
dvb_net_release(&dvb->net);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
@@ -607,9 +621,9 @@
dvb_unregister_adapter(&dvb->adapter);
}
-static int dvb_init(struct em28xx *dev)
+static int em28xx_dvb_init(struct em28xx *dev)
{
- int result = 0;
+ int result = 0, mfe_shared = 0;
struct em28xx_dvb *dvb;
if (!dev->board.has_dvb) {
@@ -648,7 +662,7 @@
dvb->fe[0] = dvb_attach(lgdt330x_attach,
&em2880_lgdt3303_dev,
&dev->i2c_adap);
- if (attach_xc3028(0x61, dev) < 0) {
+ if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
@@ -657,7 +671,7 @@
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_with_xc3028,
&dev->i2c_adap);
- if (attach_xc3028(0x61, dev) < 0) {
+ if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
@@ -668,7 +682,7 @@
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
- if (attach_xc3028(0x61, dev) < 0) {
+ if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
@@ -689,7 +703,7 @@
&dev->i2c_adap);
}
- if (attach_xc3028(0x61, dev) < 0) {
+ if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
@@ -699,7 +713,7 @@
dvb->fe[0] = dvb_attach(s5h1409_attach,
&em28xx_s5h1409_with_xc3028,
&dev->i2c_adap);
- if (attach_xc3028(0x61, dev) < 0) {
+ if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
@@ -720,7 +734,7 @@
case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL,
&dev->i2c_adap, &dev->udev->dev);
- if (attach_xc3028(0x61, dev) < 0) {
+ if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
@@ -753,11 +767,9 @@
dvb->fe[0] = dvb_attach(cxd2820r_attach,
&em28xx_cxd2820r_config, &dev->i2c_adap, NULL);
if (dvb->fe[0]) {
- struct i2c_adapter *i2c_tuner;
- i2c_tuner = cxd2820r_get_tuner_i2c_adapter(dvb->fe[0]);
/* FE 0 attach tuner */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- i2c_tuner, &em28xx_cxd2820r_tda18271_config)) {
+ &dev->i2c_adap, &em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
goto out_free;
@@ -768,10 +780,12 @@
dvb->fe[1]->id = 1;
/* FE 1 attach tuner */
if (!dvb_attach(tda18271_attach, dvb->fe[1], 0x60,
- i2c_tuner, &em28xx_cxd2820r_tda18271_config)) {
+ &dev->i2c_adap, &em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[1]);
/* leave FE 0 still active */
}
+
+ mfe_shared = 1;
}
break;
case EM2884_BOARD_TERRATEC_H5:
@@ -809,6 +823,16 @@
sizeof(dvb->fe[0]->ops.tuner_ops));
break;
+ case EM28174_BOARD_PCTV_460E:
+ /* attach demod */
+ dvb->fe[0] = dvb_attach(tda10071_attach,
+ &em28xx_tda10071_config, &dev->i2c_adap);
+
+ /* attach SEC */
+ if (dvb->fe[0])
+ dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap,
+ &em28xx_a8293_config);
+ break;
default:
em28xx_errdev("/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n");
@@ -823,11 +847,14 @@
dvb->fe[0]->callback = em28xx_tuner_callback;
/* register everything */
- result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
+ result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
if (result < 0)
goto out_free;
+ /* MFE lock */
+ dvb->adapter.mfe_shared = mfe_shared;
+
em28xx_info("Successfully loaded em28xx-dvb\n");
ret:
em28xx_set_mode(dev, EM28XX_SUSPEND);
@@ -840,7 +867,14 @@
goto ret;
}
-static int dvb_fini(struct em28xx *dev)
+static inline void prevent_sleep(struct dvb_frontend_ops *ops)
+{
+ ops->set_voltage = NULL;
+ ops->sleep = NULL;
+ ops->tuner_ops.sleep = NULL;
+}
+
+static int em28xx_dvb_fini(struct em28xx *dev)
{
if (!dev->board.has_dvb) {
/* This device does not support the extension */
@@ -848,8 +882,19 @@
}
if (dev->dvb) {
- unregister_dvb(dev->dvb);
- kfree(dev->dvb);
+ struct em28xx_dvb *dvb = dev->dvb;
+
+ if (dev->state & DEV_DISCONNECTED) {
+ /* We cannot tell the device to sleep
+ * once it has been unplugged. */
+ if (dvb->fe[0])
+ prevent_sleep(&dvb->fe[0]->ops);
+ if (dvb->fe[1])
+ prevent_sleep(&dvb->fe[1]->ops);
+ }
+
+ em28xx_unregister_dvb(dvb);
+ kfree(dvb);
dev->dvb = NULL;
}
@@ -859,8 +904,8 @@
static struct em28xx_ops dvb_ops = {
.id = EM28XX_DVB,
.name = "Em28xx dvb Extension",
- .init = dvb_init,
- .fini = dvb_fini,
+ .init = em28xx_dvb_init,
+ .fini = em28xx_dvb_fini,
};
static int __init em28xx_dvb_register(void)
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 5d12b14..679da48 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -463,11 +463,11 @@
if (!ir)
return 0;
- em28xx_ir_stop(ir->rc);
- rc_unregister_device(ir->rc);
- kfree(ir);
+ if (ir->rc)
+ rc_unregister_device(ir->rc);
/* done */
+ kfree(ir);
dev->ir = NULL;
return 0;
}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index d176dc0..9b4557a 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1156,6 +1156,21 @@
return 0;
}
+static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *norm)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+ int rc;
+
+ rc = check_dev(dev);
+ if (rc < 0)
+ return rc;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, querystd, norm);
+
+ return 0;
+}
+
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
{
struct em28xx_fh *fh = priv;
@@ -1787,6 +1802,45 @@
return 0;
}
+static int vidioc_enum_framesizes(struct file *file, void *priv,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+ struct em28xx_fmt *fmt;
+ unsigned int maxw = norm_maxw(dev);
+ unsigned int maxh = norm_maxh(dev);
+
+ fmt = format_by_fourcc(fsize->pixel_format);
+ if (!fmt) {
+ em28xx_videodbg("Fourcc format (%08x) invalid.\n",
+ fsize->pixel_format);
+ return -EINVAL;
+ }
+
+ if (dev->board.is_em2800) {
+ if (fsize->index > 1)
+ return -EINVAL;
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = maxw / (1 + fsize->index);
+ fsize->discrete.height = maxh / (1 + fsize->index);
+ return 0;
+ }
+
+ if (fsize->index != 0)
+ return -EINVAL;
+
+ /* Report a continuous range */
+ fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
+ fsize->stepwise.min_width = 48;
+ fsize->stepwise.min_height = 32;
+ fsize->stepwise.max_width = maxw;
+ fsize->stepwise.max_height = maxh;
+ fsize->stepwise.step_width = 1;
+ fsize->stepwise.step_height = 1;
+ return 0;
+}
+
/* Sliced VBI ioctls */
static int vidioc_g_fmt_sliced_vbi_cap(struct file *file, void *priv,
struct v4l2_format *f)
@@ -2200,6 +2254,7 @@
free the remaining resources */
if (dev->state & DEV_DISCONNECTED) {
em28xx_release_resources(dev);
+ kfree(dev->alt_max_pkt_size);
kfree(dev);
return 0;
}
@@ -2340,10 +2395,10 @@
.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
.vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
.vidioc_s_fmt_vbi_cap = vidioc_s_fmt_vbi_cap,
+ .vidioc_enum_framesizes = vidioc_enum_framesizes,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_cropcap = vidioc_cropcap,
-
.vidioc_g_fmt_sliced_vbi_cap = vidioc_g_fmt_sliced_vbi_cap,
.vidioc_try_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap,
.vidioc_s_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap,
@@ -2353,6 +2408,7 @@
.vidioc_qbuf = vidioc_qbuf,
.vidioc_dqbuf = vidioc_dqbuf,
.vidioc_g_std = vidioc_g_std,
+ .vidioc_querystd = vidioc_querystd,
.vidioc_s_std = vidioc_s_std,
.vidioc_g_parm = vidioc_g_parm,
.vidioc_s_parm = vidioc_s_parm,
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index d80658b..2a2cb7e 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -120,6 +120,7 @@
#define EM2874_BOARD_LEADERSHIP_ISDBT 77
#define EM28174_BOARD_PCTV_290E 78
#define EM2884_BOARD_TERRATEC_H5 79
+#define EM28174_BOARD_PCTV_460E 80
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -677,8 +678,6 @@
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
void em28xx_wake_i2c(struct em28xx *dev);
-void em28xx_remove_from_devlist(struct em28xx *dev);
-void em28xx_add_into_devlist(struct em28xx *dev);
int em28xx_register_extension(struct em28xx_ops *dev);
void em28xx_unregister_extension(struct em28xx_ops *dev);
void em28xx_init_extension(struct em28xx *dev);
diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h
index 14bb907..337ded4 100644
--- a/drivers/media/video/et61x251/et61x251.h
+++ b/drivers/media/video/et61x251/et61x251.h
@@ -165,45 +165,49 @@
#undef DBG
#undef KDBG
#ifdef ET61X251_DEBUG
-# define DBG(level, fmt, args...) \
-do { \
- if (debug >= (level)) { \
- if ((level) == 1) \
- dev_err(&cam->usbdev->dev, fmt "\n", ## args); \
- else if ((level) == 2) \
- dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
- else if ((level) >= 3) \
- dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \
- __FILE__, __func__, __LINE__ , ## args); \
- } \
+#define DBG(level, fmt, ...) \
+do { \
+ if (debug >= (level)) { \
+ if ((level) == 1) \
+ dev_err(&cam->usbdev->dev, fmt "\n", \
+ ##__VA_ARGS__); \
+ else if ((level) == 2) \
+ dev_info(&cam->usbdev->dev, fmt "\n", \
+ ##__VA_ARGS__); \
+ else if ((level) >= 3) \
+ dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \
+ __FILE__, __func__, __LINE__, \
+ ##__VA_ARGS__); \
+ } \
} while (0)
-# define KDBG(level, fmt, args...) \
-do { \
- if (debug >= (level)) { \
- if ((level) == 1 || (level) == 2) \
- pr_info("et61x251: " fmt "\n", ## args); \
- else if ((level) == 3) \
- pr_debug("sn9c102: [%s:%s:%d] " fmt "\n", __FILE__, \
- __func__, __LINE__ , ## args); \
- } \
+#define KDBG(level, fmt, ...) \
+do { \
+ if (debug >= (level)) { \
+ if ((level) == 1 || (level) == 2) \
+ pr_info(fmt "\n", ##__VA_ARGS__); \
+ else if ((level) == 3) \
+ pr_debug("[%s:%s:%d] " fmt "\n", \
+ __FILE__, __func__, __LINE__, \
+ ##__VA_ARGS__); \
+ } \
} while (0)
-# define V4LDBG(level, name, cmd) \
-do { \
- if (debug >= (level)) \
- v4l_print_ioctl(name, cmd); \
+#define V4LDBG(level, name, cmd) \
+do { \
+ if (debug >= (level)) \
+ v4l_print_ioctl(name, cmd); \
} while (0)
#else
-# define DBG(level, fmt, args...) do {;} while(0)
-# define KDBG(level, fmt, args...) do {;} while(0)
-# define V4LDBG(level, name, cmd) do {;} while(0)
+#define DBG(level, fmt, ...) do {;} while(0)
+#define KDBG(level, fmt, ...) do {;} while(0)
+#define V4LDBG(level, name, cmd) do {;} while(0)
#endif
#undef PDBG
-#define PDBG(fmt, args...) \
-dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__, \
- __LINE__ , ## args)
+#define PDBG(fmt, ...) \
+ dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \
+ __FILE__, __func__, __LINE__, ##__VA_ARGS__)
#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
+#define PDBGG(fmt, args...) do {;} while (0) /* placeholder */
#endif /* _ET61X251_H_ */
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 9a1e80a..d3777c8 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
***************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/version.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/media/video/et61x251/et61x251_tas5130d1b.c b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
index 04b7fbb..ced2e16 100644
--- a/drivers/media/video/et61x251/et61x251_tas5130d1b.c
+++ b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
***************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "et61x251_sensor.h"
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 43d9a20..103af3f 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -356,6 +356,16 @@
To compile this driver as a module, choose M here: the
module will be called gspca_t613.
+config USB_GSPCA_TOPRO
+ tristate "TOPRO USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the
+ TP6800 and TP6810 Topro chips.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_topro.
+
config USB_GSPCA_TV8532
tristate "TV8532 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index d6364a863..f345f49 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -35,6 +35,7 @@
obj-$(CONFIG_USB_GSPCA_STK014) += gspca_stk014.o
obj-$(CONFIG_USB_GSPCA_STV0680) += gspca_stv0680.o
obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o
+obj-$(CONFIG_USB_GSPCA_TOPRO) += gspca_topro.o
obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o
obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o
obj-$(CONFIG_USB_GSPCA_VICAM) += gspca_vicam.o
@@ -78,6 +79,7 @@
gspca_stv0680-objs := stv0680.o
gspca_sunplus-objs := sunplus.o
gspca_t613-objs := t613.o
+gspca_topro-objs := topro.o
gspca_tv8532-objs := tv8532.o
gspca_vc032x-objs := vc032x.o
gspca_vicam-objs := vicam.o
diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/video/gspca/benq.c
index a09c470..6ae2616 100644
--- a/drivers/media/video/gspca/benq.c
+++ b/drivers/media/video/gspca/benq.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "benq"
#include "gspca.h"
@@ -62,7 +64,7 @@
0,
500);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -84,20 +86,6 @@
return 0;
}
-static int sd_isoc_init(struct gspca_dev *gspca_dev)
-{
- int ret;
-
- ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface,
- gspca_dev->nbalt - 1);
- if (ret < 0) {
- err("usb_set_interface failed");
- return ret;
- }
-/* reg_w(gspca_dev, 0x0003, 0x0002); */
- return 0;
-}
-
/* -- start the camera -- */
static int sd_start(struct gspca_dev *gspca_dev)
{
@@ -113,7 +101,7 @@
for (n = 0; n < 4; n++) {
urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
if (!urb) {
- err("usb_alloc_urb failed");
+ pr_err("usb_alloc_urb failed\n");
return -ENOMEM;
}
gspca_dev->urb[n] = urb;
@@ -123,7 +111,7 @@
&urb->transfer_dma);
if (urb->transfer_buffer == NULL) {
- err("usb_alloc_coherent failed");
+ pr_err("usb_alloc_coherent failed\n");
return -ENOMEM;
}
urb->dev = gspca_dev->dev;
@@ -181,7 +169,7 @@
if (gspca_dev->frozen)
return;
#endif
- err("urb status: %d", urb->status);
+ pr_err("urb status: %d\n", urb->status);
return;
}
@@ -209,7 +197,7 @@
if (st == 0)
st = urb->iso_frame_desc[i].status;
if (st) {
- err("ISOC data error: [%d] status=%d",
+ pr_err("ISOC data error: [%d] status=%d\n",
i, st);
gspca_dev->last_packet_type = DISCARD_PACKET;
continue;
@@ -256,10 +244,10 @@
/* resubmit the URBs */
st = usb_submit_urb(urb0, GFP_ATOMIC);
if (st < 0)
- err("usb_submit_urb(0) ret %d", st);
+ pr_err("usb_submit_urb(0) ret %d\n", st);
st = usb_submit_urb(urb, GFP_ATOMIC);
if (st < 0)
- err("usb_submit_urb() ret %d", st);
+ pr_err("usb_submit_urb() ret %d\n", st);
}
/* sub-driver description */
@@ -269,7 +257,6 @@
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
.init = sd_init,
- .isoc_init = sd_isoc_init,
.start = sd_start,
.stopN = sd_stopN,
.pkt_scan = sd_pkt_scan,
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 8b39849..4c56dbe 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "conex"
#include "gspca.h"
@@ -129,7 +131,7 @@
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
- err("reg_r: buffer overflow");
+ pr_err("reg_r: buffer overflow\n");
return;
}
#endif
@@ -169,7 +171,7 @@
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
- err("reg_w: buffer overflow");
+ pr_err("reg_w: buffer overflow\n");
return;
}
PDEBUG(D_USBO, "reg write [%02x] = %02x..", index, *buffer);
diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c
index f2a9451..f9b86b2 100644
--- a/drivers/media/video/gspca/cpia1.c
+++ b/drivers/media/video/gspca/cpia1.c
@@ -26,6 +26,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "cpia1"
#include <linux/input.h>
@@ -550,8 +552,7 @@
gspca_dev->usb_buf, databytes, 1000);
if (ret < 0)
- err("usb_control_msg %02x, error %d", command[1],
- ret);
+ pr_err("usb_control_msg %02x, error %d\n", command[1], ret);
if (ret == -EPIPE && retries > 0) {
retries--;
@@ -1279,7 +1280,7 @@
cmd[7] = 0;
ret = cpia_usb_transferCmd(gspca_dev, cmd);
if (ret) {
- err("ReadVPRegs(30,4,9,8) - failed: %d", ret);
+ pr_err("ReadVPRegs(30,4,9,8) - failed: %d\n", ret);
return;
}
exp_acc = gspca_dev->usb_buf[0];
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index 4b2c483..0357d6d 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "etoms"
#include "gspca.h"
@@ -236,7 +238,7 @@
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
- err("reg_r: buffer overflow");
+ pr_err("reg_r: buffer overflow\n");
return;
}
#endif
@@ -274,7 +276,7 @@
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
- err("reg_w: buffer overflow");
+ pr_err("reg_w: buffer overflow\n");
return;
}
PDEBUG(D_USBO, "reg write [%02x] = %02x..", index, *buffer);
diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c
index 987b4b69d..ea48200 100644
--- a/drivers/media/video/gspca/finepix.c
+++ b/drivers/media/video/gspca/finepix.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "finepix"
#include "gspca.h"
@@ -182,7 +184,7 @@
/* Init the device */
ret = command(gspca_dev, 0);
if (ret < 0) {
- err("init failed %d", ret);
+ pr_err("init failed %d\n", ret);
return ret;
}
@@ -194,14 +196,14 @@
FPIX_MAX_TRANSFER, &len,
FPIX_TIMEOUT);
if (ret < 0) {
- err("usb_bulk_msg failed %d", ret);
+ pr_err("usb_bulk_msg failed %d\n", ret);
return ret;
}
/* Request a frame, but don't read it */
ret = command(gspca_dev, 1);
if (ret < 0) {
- err("frame request failed %d", ret);
+ pr_err("frame request failed %d\n", ret);
return ret;
}
diff --git a/drivers/media/video/gspca/gl860/Makefile b/drivers/media/video/gspca/gl860/Makefile
index 13c9403..f511ecc 100644
--- a/drivers/media/video/gspca/gl860/Makefile
+++ b/drivers/media/video/gspca/gl860/Makefile
@@ -6,5 +6,5 @@
gl860-ov9655.o \
gl860-mi2020.o
-EXTRA_CFLAGS += -Idrivers/media/video/gspca
+ccflags-y += -Idrivers/media/video/gspca
diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c
index e8e071a..2ced3b7 100644
--- a/drivers/media/video/gspca/gl860/gl860.c
+++ b/drivers/media/video/gspca/gl860/gl860.c
@@ -18,6 +18,9 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "gspca.h"
#include "gl860.h"
@@ -572,9 +575,8 @@
}
if (r < 0)
- err("ctrl transfer failed %4d "
- "[p%02x r%d v%04x i%04x len%d]",
- r, pref, req, val, index, len);
+ pr_err("ctrl transfer failed %4d [p%02x r%d v%04x i%04x len%d]\n",
+ r, pref, req, val, index, len);
else if (len > 1 && r < len)
PDEBUG(D_ERR, "short ctrl transfer %d/%d", r, len);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 5da4879..881e04c 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -21,7 +21,9 @@
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define MODULE_NAME "gspca"
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define GSPCA_VERSION "2.14.0"
#include <linux/init.h>
#include <linux/fs.h>
@@ -50,12 +52,10 @@
#error "DEF_NURBS too big"
#endif
-#define DRIVER_VERSION_NUMBER "2.13.0"
-
MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
MODULE_DESCRIPTION("GSPCA USB Camera Driver");
MODULE_LICENSE("GPL");
-MODULE_VERSION(DRIVER_VERSION_NUMBER);
+MODULE_VERSION(GSPCA_VERSION);
#ifdef GSPCA_DEBUG
int gspca_debug = D_ERR | D_PROBE;
@@ -148,7 +148,7 @@
if (ret == 0) {
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0)
- err("Resubmit URB failed with error %i", ret);
+ pr_err("Resubmit URB failed with error %i\n", ret);
}
}
@@ -177,8 +177,8 @@
err = input_register_device(input_dev);
if (err) {
- err("Input device registration failed with error %i",
- err);
+ pr_err("Input device registration failed with error %i\n",
+ err);
input_dev->dev.parent = NULL;
input_free_device(input_dev);
} else {
@@ -323,8 +323,8 @@
/* check the packet status and length */
st = urb->iso_frame_desc[i].status;
if (st) {
- err("ISOC data error: [%d] len=%d, status=%d",
- i, len, st);
+ pr_err("ISOC data error: [%d] len=%d, status=%d\n",
+ i, len, st);
gspca_dev->last_packet_type = DISCARD_PACKET;
continue;
}
@@ -346,7 +346,7 @@
/* resubmit the URB */
st = usb_submit_urb(urb, GFP_ATOMIC);
if (st < 0)
- err("usb_submit_urb() ret %d", st);
+ pr_err("usb_submit_urb() ret %d\n", st);
}
/*
@@ -400,7 +400,7 @@
if (gspca_dev->cam.bulk_nurbs != 0) {
st = usb_submit_urb(urb, GFP_ATOMIC);
if (st < 0)
- err("usb_submit_urb() ret %d", st);
+ pr_err("usb_submit_urb() ret %d\n", st);
}
}
@@ -464,7 +464,7 @@
} else {
/* !! image is NULL only when last pkt is LAST or DISCARD
if (gspca_dev->image == NULL) {
- err("gspca_frame_add() image == NULL");
+ pr_err("gspca_frame_add() image == NULL\n");
return;
}
*/
@@ -497,19 +497,6 @@
}
EXPORT_SYMBOL(gspca_frame_add);
-static int gspca_is_compressed(__u32 format)
-{
- switch (format) {
- case V4L2_PIX_FMT_MJPEG:
- case V4L2_PIX_FMT_JPEG:
- case V4L2_PIX_FMT_SPCA561:
- case V4L2_PIX_FMT_PAC207:
- case V4L2_PIX_FMT_MR97310A:
- return 1;
- }
- return 0;
-}
-
static int frame_alloc(struct gspca_dev *gspca_dev, struct file *file,
enum v4l2_memory memory, unsigned int count)
{
@@ -525,7 +512,7 @@
count = GSPCA_MAX_FRAMES - 1;
gspca_dev->frbuf = vmalloc_32(frsz * count);
if (!gspca_dev->frbuf) {
- err("frame alloc failed");
+ pr_err("frame alloc failed\n");
return -ENOMEM;
}
gspca_dev->capt_file = file;
@@ -597,7 +584,7 @@
return 0;
ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 0);
if (ret < 0)
- err("set alt 0 err %d", ret);
+ pr_err("set alt 0 err %d\n", ret);
return ret;
}
@@ -640,53 +627,104 @@
return NULL;
}
-/*
- * look for an input (isoc or bulk) endpoint
- *
- * The endpoint is defined by the subdriver.
- * Use only the first isoc (some Zoran - 0x0572:0x0001 - have two such ep).
- * This routine may be called many times when the bandwidth is too small
- * (the bandwidth is checked on urb submit).
- */
-static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
+/* compute the minimum bandwidth for the current transfer */
+static u32 which_bandwidth(struct gspca_dev *gspca_dev)
{
- struct usb_interface *intf;
- struct usb_host_endpoint *ep;
- int xfer, i, ret;
+ u32 bandwidth;
+ int i;
- intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
- ep = NULL;
- xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK
- : USB_ENDPOINT_XFER_ISOC;
- i = gspca_dev->alt; /* previous alt setting */
- if (gspca_dev->cam.reverse_alts) {
- while (++i < gspca_dev->nbalt) {
- ep = alt_xfer(&intf->altsetting[i], xfer);
- if (ep)
- break;
- }
+ i = gspca_dev->curr_mode;
+ bandwidth = gspca_dev->cam.cam_mode[i].sizeimage;
+
+ /* if the image is compressed, estimate the mean image size */
+ if (bandwidth < gspca_dev->cam.cam_mode[i].width *
+ gspca_dev->cam.cam_mode[i].height)
+ bandwidth /= 3;
+
+ /* estimate the frame rate */
+ if (gspca_dev->sd_desc->get_streamparm) {
+ struct v4l2_streamparm parm;
+
+ parm.parm.capture.timeperframe.denominator = 15;
+ gspca_dev->sd_desc->get_streamparm(gspca_dev, &parm);
+ bandwidth *= parm.parm.capture.timeperframe.denominator;
} else {
- while (--i >= 0) {
- ep = alt_xfer(&intf->altsetting[i], xfer);
- if (ep)
- break;
+ bandwidth *= 15; /* 15 fps */
+ }
+
+ PDEBUG(D_STREAM, "min bandwidth: %d", bandwidth);
+ return bandwidth;
+}
+
+/* endpoint table */
+#define MAX_ALT 16
+struct ep_tb_s {
+ u32 alt;
+ u32 bandwidth;
+};
+
+/*
+ * build the table of the endpoints
+ * and compute the minimum bandwidth for the image transfer
+ */
+static int build_ep_tb(struct gspca_dev *gspca_dev,
+ struct usb_interface *intf,
+ int xfer,
+ struct ep_tb_s *ep_tb)
+{
+ struct usb_host_endpoint *ep;
+ int i, j, nbalt, psize, found;
+ u32 bandwidth, last_bw;
+
+ nbalt = intf->num_altsetting;
+ if (nbalt > MAX_ALT)
+ nbalt = MAX_ALT; /* fixme: should warn */
+
+ /* build the endpoint table */
+ i = 0;
+ last_bw = 0;
+ for (;;) {
+ ep_tb->bandwidth = 2000 * 2000 * 120;
+ found = 0;
+ for (j = 0; j < nbalt; j++) {
+ ep = alt_xfer(&intf->altsetting[j], xfer);
+ if (ep == NULL)
+ continue;
+ psize = le16_to_cpu(ep->desc.wMaxPacketSize);
+ if (!gspca_dev->cam.bulk) /* isoc */
+ psize = (psize & 0x07ff) *
+ (1 + ((psize >> 11) & 3));
+ bandwidth = psize * ep->desc.bInterval * 1000;
+ if (gspca_dev->dev->speed == USB_SPEED_HIGH
+ || gspca_dev->dev->speed == USB_SPEED_SUPER)
+ bandwidth *= 8;
+ if (bandwidth <= last_bw)
+ continue;
+ if (bandwidth < ep_tb->bandwidth) {
+ ep_tb->bandwidth = bandwidth;
+ ep_tb->alt = j;
+ found = 1;
+ }
}
+ if (!found)
+ break;
+ PDEBUG(D_STREAM, "alt %d bandwidth %d",
+ ep_tb->alt, ep_tb->bandwidth);
+ last_bw = ep_tb->bandwidth;
+ i++;
+ ep_tb++;
}
- if (ep == NULL) {
- err("no transfer endpoint found");
- return NULL;
+
+ /* get the requested bandwidth and start at the highest atlsetting */
+ bandwidth = which_bandwidth(gspca_dev);
+ ep_tb--;
+ while (i > 1) {
+ ep_tb--;
+ if (ep_tb->bandwidth < bandwidth)
+ break;
+ i--;
}
- PDEBUG(D_STREAM, "use alt %d ep 0x%02x",
- i, ep->desc.bEndpointAddress);
- gspca_dev->alt = i; /* memorize the current alt setting */
- if (gspca_dev->nbalt > 1) {
- ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i);
- if (ret < 0) {
- err("set alt %d err %d", i, ret);
- ep = NULL;
- }
- }
- return ep;
+ return i;
}
/*
@@ -731,7 +769,7 @@
for (n = 0; n < nurbs; n++) {
urb = usb_alloc_urb(npkt, GFP_KERNEL);
if (!urb) {
- err("usb_alloc_urb failed");
+ pr_err("usb_alloc_urb failed\n");
return -ENOMEM;
}
gspca_dev->urb[n] = urb;
@@ -741,7 +779,7 @@
&urb->transfer_dma);
if (urb->transfer_buffer == NULL) {
- err("usb_alloc_coherent failed");
+ pr_err("usb_alloc_coherent failed\n");
return -ENOMEM;
}
urb->dev = gspca_dev->dev;
@@ -752,7 +790,10 @@
ep->desc.bEndpointAddress);
urb->transfer_flags = URB_ISO_ASAP
| URB_NO_TRANSFER_DMA_MAP;
- urb->interval = ep->desc.bInterval;
+ if (gspca_dev->dev->speed == USB_SPEED_LOW)
+ urb->interval = ep->desc.bInterval;
+ else
+ urb->interval = 1 << (ep->desc.bInterval - 1);
urb->complete = isoc_irq;
urb->number_of_packets = npkt;
for (i = 0; i < npkt; i++) {
@@ -774,9 +815,11 @@
*/
static int gspca_init_transfer(struct gspca_dev *gspca_dev)
{
+ struct usb_interface *intf;
struct usb_host_endpoint *ep;
struct urb *urb;
- int n, ret;
+ struct ep_tb_s ep_tb[MAX_ALT];
+ int n, ret, xfer, alt, alt_idx;
if (mutex_lock_interruptible(&gspca_dev->usb_lock))
return -ERESTARTSYS;
@@ -794,30 +837,65 @@
gspca_dev->usb_err = 0;
- /* set the higher alternate setting and
- * loop until urb submit succeeds */
- if (gspca_dev->cam.reverse_alts)
- gspca_dev->alt = 0;
- else
- gspca_dev->alt = gspca_dev->nbalt;
-
+ /* do the specific subdriver stuff before endpoint selection */
+ gspca_dev->alt = 0;
if (gspca_dev->sd_desc->isoc_init) {
ret = gspca_dev->sd_desc->isoc_init(gspca_dev);
if (ret < 0)
goto unlock;
}
+ intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
+ xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK
+ : USB_ENDPOINT_XFER_ISOC;
- gspca_input_destroy_urb(gspca_dev);
- ep = get_ep(gspca_dev);
- if (ep == NULL) {
- ret = -EIO;
- goto out;
+ /* if the subdriver forced an altsetting, get the endpoint */
+ if (gspca_dev->alt != 0) {
+ gspca_dev->alt--; /* (previous version compatibility) */
+ ep = alt_xfer(&intf->altsetting[gspca_dev->alt], xfer);
+ if (ep == NULL) {
+ pr_err("bad altsetting %d\n", gspca_dev->alt);
+ ret = -EIO;
+ goto out;
+ }
+ ep_tb[0].alt = gspca_dev->alt;
+ alt_idx = 1;
+ } else {
+
+ /* else, compute the minimum bandwidth
+ * and build the endpoint table */
+ alt_idx = build_ep_tb(gspca_dev, intf, xfer, ep_tb);
+ if (alt_idx <= 0) {
+ pr_err("no transfer endpoint found\n");
+ ret = -EIO;
+ goto unlock;
+ }
}
+
+ /* set the highest alternate setting and
+ * loop until urb submit succeeds */
+ gspca_input_destroy_urb(gspca_dev);
+
+ gspca_dev->alt = ep_tb[--alt_idx].alt;
+ alt = -1;
for (;;) {
+ if (alt != gspca_dev->alt) {
+ alt = gspca_dev->alt;
+ if (gspca_dev->nbalt > 1) {
+ ret = usb_set_interface(gspca_dev->dev,
+ gspca_dev->iface,
+ alt);
+ if (ret < 0) {
+ if (ret == -ENOSPC)
+ goto retry; /*fixme: ugly*/
+ pr_err("set alt %d err %d\n", alt, ret);
+ goto out;
+ }
+ }
+ }
if (!gspca_dev->cam.no_urb_create) {
- PDEBUG(D_STREAM, "init transfer alt %d",
- gspca_dev->alt);
- ret = create_urbs(gspca_dev, ep);
+ PDEBUG(D_STREAM, "init transfer alt %d", alt);
+ ret = create_urbs(gspca_dev,
+ alt_xfer(&intf->altsetting[alt], xfer));
if (ret < 0) {
destroy_urbs(gspca_dev);
goto out;
@@ -851,29 +929,35 @@
break;
}
if (ret >= 0)
- break;
+ break; /* transfer is started */
+
+ /* something when wrong
+ * stop the webcam and free the transfer resources */
gspca_stream_off(gspca_dev);
if (ret != -ENOSPC) {
- err("usb_submit_urb alt %d err %d",
- gspca_dev->alt, ret);
+ pr_err("usb_submit_urb alt %d err %d\n",
+ gspca_dev->alt, ret);
goto out;
}
/* the bandwidth is not wide enough
* negotiate or try a lower alternate setting */
+retry:
PDEBUG(D_ERR|D_STREAM,
- "bandwidth not wide enough - trying again");
+ "alt %d - bandwidth not wide enough - trying again",
+ alt);
msleep(20); /* wait for kill complete */
if (gspca_dev->sd_desc->isoc_nego) {
ret = gspca_dev->sd_desc->isoc_nego(gspca_dev);
if (ret < 0)
goto out;
} else {
- ep = get_ep(gspca_dev);
- if (ep == NULL) {
+ if (alt_idx <= 0) {
+ pr_err("no transfer endpoint found\n");
ret = -EIO;
goto out;
}
+ alt = ep_tb[--alt_idx].alt;
}
}
out:
@@ -1044,7 +1128,9 @@
return -EINVAL; /* no more format */
fmtdesc->pixelformat = fmt_tb[index];
- if (gspca_is_compressed(fmt_tb[index]))
+ if (gspca_dev->cam.cam_mode[i].sizeimage <
+ gspca_dev->cam.cam_mode[i].width *
+ gspca_dev->cam.cam_mode[i].height)
fmtdesc->flags = V4L2_FMT_FLAG_COMPRESSED;
fmtdesc->description[0] = fmtdesc->pixelformat & 0xff;
fmtdesc->description[1] = (fmtdesc->pixelformat >> 8) & 0xff;
@@ -2195,19 +2281,20 @@
struct usb_device *dev = interface_to_usbdev(intf);
int ret;
- PDEBUG(D_PROBE, "probing %04x:%04x", id->idVendor, id->idProduct);
+ pr_info("%s-" GSPCA_VERSION " probing %04x:%04x\n",
+ sd_desc->name, id->idVendor, id->idProduct);
/* create the device */
if (dev_size < sizeof *gspca_dev)
dev_size = sizeof *gspca_dev;
gspca_dev = kzalloc(dev_size, GFP_KERNEL);
if (!gspca_dev) {
- err("couldn't kzalloc gspca struct");
+ pr_err("couldn't kzalloc gspca struct\n");
return -ENOMEM;
}
gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
if (!gspca_dev->usb_buf) {
- err("out of memory");
+ pr_err("out of memory\n");
ret = -ENOMEM;
goto out;
}
@@ -2264,7 +2351,7 @@
VFL_TYPE_GRABBER,
-1);
if (ret < 0) {
- err("video_register_device err %d", ret);
+ pr_err("video_register_device err %d\n", ret);
goto out;
}
@@ -2296,8 +2383,8 @@
/* we don't handle multi-config cameras */
if (dev->descriptor.bNumConfigurations != 1) {
- err("%04x:%04x too many config",
- id->idVendor, id->idProduct);
+ pr_err("%04x:%04x too many config\n",
+ id->idVendor, id->idProduct);
return -ENODEV;
}
@@ -2480,7 +2567,7 @@
/* -- module insert / remove -- */
static int __init gspca_init(void)
{
- info("v" DRIVER_VERSION_NUMBER " registered");
+ pr_info("v" GSPCA_VERSION " registered\n");
return 0;
}
static void __exit gspca_exit(void)
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 49e2fcb..e444f16 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -14,11 +14,12 @@
#ifdef GSPCA_DEBUG
/* GSPCA our debug messages */
extern int gspca_debug;
-#define PDEBUG(level, fmt, args...) \
- do {\
- if (gspca_debug & (level)) \
- printk(KERN_INFO MODULE_NAME ": " fmt "\n", ## args); \
- } while (0)
+#define PDEBUG(level, fmt, ...) \
+do { \
+ if (gspca_debug & (level)) \
+ pr_info(fmt, ##__VA_ARGS__); \
+} while (0)
+
#define D_ERR 0x01
#define D_PROBE 0x02
#define D_CONF 0x04
@@ -29,17 +30,8 @@
#define D_USBO 0x00
#define D_V4L2 0x0100
#else
-#define PDEBUG(level, fmt, args...)
+#define PDEBUG(level, fmt, ...)
#endif
-#undef err
-#define err(fmt, args...) \
- printk(KERN_ERR MODULE_NAME ": " fmt "\n", ## args)
-#undef info
-#define info(fmt, args...) \
- printk(KERN_INFO MODULE_NAME ": " fmt "\n", ## args)
-#undef warn
-#define warn(fmt, args...) \
- printk(KERN_WARNING MODULE_NAME ": " fmt "\n", ## args)
#define GSPCA_MAX_FRAMES 16 /* maximum number of video frame buffers */
/* image transfers */
diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c
index 1bd9c4b..8e3dabe 100644
--- a/drivers/media/video/gspca/jeilinj.c
+++ b/drivers/media/video/gspca/jeilinj.c
@@ -24,6 +24,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "jeilinj"
#include <linux/slab.h>
@@ -113,8 +115,8 @@
usb_sndbulkpipe(gspca_dev->dev, 3),
gspca_dev->usb_buf, 2, NULL, 500);
if (retval < 0) {
- err("command write [%02x] error %d",
- gspca_dev->usb_buf[0], retval);
+ pr_err("command write [%02x] error %d\n",
+ gspca_dev->usb_buf[0], retval);
gspca_dev->usb_err = retval;
}
}
@@ -131,8 +133,8 @@
gspca_dev->usb_buf, 1, NULL, 500);
response = gspca_dev->usb_buf[0];
if (retval < 0) {
- err("read command [%02x] error %d",
- gspca_dev->usb_buf[0], retval);
+ pr_err("read command [%02x] error %d\n",
+ gspca_dev->usb_buf[0], retval);
gspca_dev->usb_err = retval;
}
}
@@ -403,13 +405,7 @@
dev->type = id->driver_info;
gspca_dev->cam.ctrls = dev->ctrls;
dev->quality = QUALITY_DEF;
- dev->ctrls[LIGHTFREQ].def = V4L2_CID_POWER_LINE_FREQUENCY_60HZ;
- dev->ctrls[RED].def = RED_BALANCE_DEF;
- dev->ctrls[GREEN].def = GREEN_BALANCE_DEF;
- dev->ctrls[BLUE].def = BLUE_BALANCE_DEF;
- PDEBUG(D_PROBE,
- "JEILINJ camera detected"
- " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+
cam->cam_mode = jlj_mode;
cam->nmodes = ARRAY_SIZE(jlj_mode);
cam->bulk = 1;
@@ -422,7 +418,7 @@
{
int i;
u8 *buf;
- u8 stop_commands[][2] = {
+ static u8 stop_commands[][2] = {
{0x71, 0x00},
{0x70, 0x09},
{0x71, 0x80},
diff --git a/drivers/media/video/gspca/kinect.c b/drivers/media/video/gspca/kinect.c
index 26fc206..4fe51fd 100644
--- a/drivers/media/video/gspca/kinect.c
+++ b/drivers/media/video/gspca/kinect.c
@@ -24,6 +24,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "kinect"
#include "gspca.h"
@@ -34,11 +36,6 @@
MODULE_DESCRIPTION("GSPCA/Kinect Sensor Device USB Camera Driver");
MODULE_LICENSE("GPL");
-#ifdef GSPCA_DEBUG
-int gspca_debug = D_ERR | D_PROBE | D_CONF | D_STREAM | D_FRAM | D_PACK |
- D_USBI | D_USBO | D_V4L2;
-#endif
-
struct pkt_hdr {
uint8_t magic[2];
uint8_t pad;
@@ -141,7 +138,7 @@
struct cam_hdr *rhdr = (void *)ibuf;
if (cmd_len & 1 || cmd_len > (0x400 - sizeof(*chdr))) {
- err("send_cmd: Invalid command length (0x%x)", cmd_len);
+ pr_err("send_cmd: Invalid command length (0x%x)\n", cmd_len);
return -1;
}
@@ -157,7 +154,7 @@
PDEBUG(D_USBO, "Control cmd=%04x tag=%04x len=%04x: %d", cmd,
sd->cam_tag, cmd_len, res);
if (res < 0) {
- err("send_cmd: Output control transfer failed (%d)", res);
+ pr_err("send_cmd: Output control transfer failed (%d)\n", res);
return res;
}
@@ -166,33 +163,35 @@
} while (actual_len == 0);
PDEBUG(D_USBO, "Control reply: %d", res);
if (actual_len < sizeof(*rhdr)) {
- err("send_cmd: Input control transfer failed (%d)", res);
+ pr_err("send_cmd: Input control transfer failed (%d)\n", res);
return res;
}
actual_len -= sizeof(*rhdr);
if (rhdr->magic[0] != 0x52 || rhdr->magic[1] != 0x42) {
- err("send_cmd: Bad magic %02x %02x", rhdr->magic[0],
- rhdr->magic[1]);
+ pr_err("send_cmd: Bad magic %02x %02x\n",
+ rhdr->magic[0], rhdr->magic[1]);
return -1;
}
if (rhdr->cmd != chdr->cmd) {
- err("send_cmd: Bad cmd %02x != %02x", rhdr->cmd, chdr->cmd);
+ pr_err("send_cmd: Bad cmd %02x != %02x\n",
+ rhdr->cmd, chdr->cmd);
return -1;
}
if (rhdr->tag != chdr->tag) {
- err("send_cmd: Bad tag %04x != %04x", rhdr->tag, chdr->tag);
+ pr_err("send_cmd: Bad tag %04x != %04x\n",
+ rhdr->tag, chdr->tag);
return -1;
}
if (cpu_to_le16(rhdr->len) != (actual_len/2)) {
- err("send_cmd: Bad len %04x != %04x",
- cpu_to_le16(rhdr->len), (int)(actual_len/2));
+ pr_err("send_cmd: Bad len %04x != %04x\n",
+ cpu_to_le16(rhdr->len), (int)(actual_len/2));
return -1;
}
if (actual_len > reply_len) {
- warn("send_cmd: Data buffer is %d bytes long, but got %d bytes",
- reply_len, actual_len);
+ pr_warn("send_cmd: Data buffer is %d bytes long, but got %d bytes\n",
+ reply_len, actual_len);
memcpy(replybuf, ibuf+sizeof(*rhdr), reply_len);
} else {
memcpy(replybuf, ibuf+sizeof(*rhdr), actual_len);
@@ -218,8 +217,8 @@
if (res < 0)
return res;
if (res != 2) {
- warn("send_cmd returned %d [%04x %04x], 0000 expected",
- res, reply[0], reply[1]);
+ pr_warn("send_cmd returned %d [%04x %04x], 0000 expected\n",
+ res, reply[0], reply[1]);
}
return 0;
}
@@ -353,8 +352,8 @@
return;
if (hdr->magic[0] != 'R' || hdr->magic[1] != 'B') {
- warn("[Stream %02x] Invalid magic %02x%02x", sd->stream_flag,
- hdr->magic[0], hdr->magic[1]);
+ pr_warn("[Stream %02x] Invalid magic %02x%02x\n",
+ sd->stream_flag, hdr->magic[0], hdr->magic[1]);
return;
}
@@ -368,7 +367,7 @@
gspca_frame_add(gspca_dev, LAST_PACKET, data, datalen);
else
- warn("Packet type not recognized...");
+ pr_warn("Packet type not recognized...\n");
}
/* sub-driver description */
diff --git a/drivers/media/video/gspca/konica.c b/drivers/media/video/gspca/konica.c
index 5964691..f3f7fe0 100644
--- a/drivers/media/video/gspca/konica.c
+++ b/drivers/media/video/gspca/konica.c
@@ -28,6 +28,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "konica"
#include <linux/input.h>
@@ -200,7 +202,7 @@
0,
1000);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -221,7 +223,7 @@
2,
1000);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -284,7 +286,7 @@
intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt) {
- err("Couldn't get altsetting");
+ pr_err("Couldn't get altsetting\n");
return -EIO;
}
@@ -315,7 +317,7 @@
le16_to_cpu(alt->endpoint[i].desc.wMaxPacketSize);
urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
if (!urb) {
- err("usb_alloc_urb failed");
+ pr_err("usb_alloc_urb failed\n");
return -ENOMEM;
}
gspca_dev->urb[n] = urb;
@@ -324,7 +326,7 @@
GFP_KERNEL,
&urb->transfer_dma);
if (urb->transfer_buffer == NULL) {
- err("usb_buffer_alloc failed");
+ pr_err("usb_buffer_alloc failed\n");
return -ENOMEM;
}
@@ -386,7 +388,7 @@
PDEBUG(D_ERR, "urb status: %d", urb->status);
st = usb_submit_urb(urb, GFP_ATOMIC);
if (st < 0)
- err("resubmit urb error %d", st);
+ pr_err("resubmit urb error %d\n", st);
return;
}
@@ -477,7 +479,7 @@
}
st = usb_submit_urb(status_urb, GFP_ATOMIC);
if (st < 0)
- err("usb_submit_urb(status_urb) ret %d", st);
+ pr_err("usb_submit_urb(status_urb) ret %d\n", st);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/video/gspca/m5602/Makefile
index bf7a19a..7f52961 100644
--- a/drivers/media/video/gspca/m5602/Makefile
+++ b/drivers/media/video/gspca/m5602/Makefile
@@ -8,4 +8,4 @@
m5602_s5k83a.o \
m5602_s5k4aa.o
-EXTRA_CFLAGS += -Idrivers/media/video/gspca
+ccflags-y += -Idrivers/media/video/gspca
diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c
index a7722b1..67533e5 100644
--- a/drivers/media/video/gspca/m5602/m5602_core.c
+++ b/drivers/media/video/gspca/m5602/m5602_core.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "m5602_ov9650.h"
#include "m5602_ov7660.h"
#include "m5602_mt9m111.h"
@@ -192,10 +194,9 @@
for (i = 0; i < 0x80; i++) {
unsigned char val = 0;
m5602_read_bridge(sd, i, &val);
- info("ALi m5602 address 0x%x contains 0x%x", i, val);
+ pr_info("ALi m5602 address 0x%x contains 0x%x\n", i, val);
}
- info("Warning: The ALi m5602 webcam probably won't work "
- "until it's power cycled");
+ pr_info("Warning: The ALi m5602 webcam probably won't work until it's power cycled\n");
}
static int m5602_probe_sensor(struct sd *sd)
@@ -231,7 +232,7 @@
return 0;
/* More sensor probe function goes here */
- info("Failed to find a sensor");
+ pr_info("Failed to find a sensor\n");
sd->sensor = NULL;
return -ENODEV;
}
diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c
index 0d605a5..6268aa2 100644
--- a/drivers/media/video/gspca/m5602/m5602_mt9m111.c
+++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "m5602_mt9m111.h"
static int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
@@ -163,7 +165,7 @@
if (force_sensor) {
if (force_sensor == MT9M111_SENSOR) {
- info("Forcing a %s sensor", mt9m111.name);
+ pr_info("Forcing a %s sensor\n", mt9m111.name);
goto sensor_found;
}
/* If we want to force another sensor, don't try to probe this
@@ -191,7 +193,7 @@
return -ENODEV;
if ((data[0] == 0x14) && (data[1] == 0x3a)) {
- info("Detected a mt9m111 sensor");
+ pr_info("Detected a mt9m111 sensor\n");
goto sensor_found;
}
@@ -612,34 +614,34 @@
{
u8 address, value[2] = {0x00, 0x00};
- info("Dumping the mt9m111 register state");
+ pr_info("Dumping the mt9m111 register state\n");
- info("Dumping the mt9m111 sensor core registers");
+ pr_info("Dumping the mt9m111 sensor core registers\n");
value[1] = MT9M111_SENSOR_CORE;
m5602_write_sensor(sd, MT9M111_PAGE_MAP, value, 2);
for (address = 0; address < 0xff; address++) {
m5602_read_sensor(sd, address, value, 2);
- info("register 0x%x contains 0x%x%x",
- address, value[0], value[1]);
+ pr_info("register 0x%x contains 0x%x%x\n",
+ address, value[0], value[1]);
}
- info("Dumping the mt9m111 color pipeline registers");
+ pr_info("Dumping the mt9m111 color pipeline registers\n");
value[1] = MT9M111_COLORPIPE;
m5602_write_sensor(sd, MT9M111_PAGE_MAP, value, 2);
for (address = 0; address < 0xff; address++) {
m5602_read_sensor(sd, address, value, 2);
- info("register 0x%x contains 0x%x%x",
- address, value[0], value[1]);
+ pr_info("register 0x%x contains 0x%x%x\n",
+ address, value[0], value[1]);
}
- info("Dumping the mt9m111 camera control registers");
+ pr_info("Dumping the mt9m111 camera control registers\n");
value[1] = MT9M111_CAMERA_CONTROL;
m5602_write_sensor(sd, MT9M111_PAGE_MAP, value, 2);
for (address = 0; address < 0xff; address++) {
m5602_read_sensor(sd, address, value, 2);
- info("register 0x%x contains 0x%x%x",
- address, value[0], value[1]);
+ pr_info("register 0x%x contains 0x%x%x\n",
+ address, value[0], value[1]);
}
- info("mt9m111 register state dump complete");
+ pr_info("mt9m111 register state dump complete\n");
}
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index b12f604..9a14835 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "m5602_ov7660.h"
static int ov7660_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
@@ -149,7 +151,7 @@
if (force_sensor) {
if (force_sensor == OV7660_SENSOR) {
- info("Forcing an %s sensor", ov7660.name);
+ pr_info("Forcing an %s sensor\n", ov7660.name);
goto sensor_found;
}
/* If we want to force another sensor,
@@ -180,10 +182,10 @@
if (m5602_read_sensor(sd, OV7660_VER, &ver_id, 1))
return -ENODEV;
- info("Sensor reported 0x%x%x", prod_id, ver_id);
+ pr_info("Sensor reported 0x%x%x\n", prod_id, ver_id);
if ((prod_id == 0x76) && (ver_id == 0x60)) {
- info("Detected a ov7660 sensor");
+ pr_info("Detected a ov7660 sensor\n");
goto sensor_found;
}
return -ENODEV;
@@ -457,17 +459,16 @@
static void ov7660_dump_registers(struct sd *sd)
{
int address;
- info("Dumping the ov7660 register state");
+ pr_info("Dumping the ov7660 register state\n");
for (address = 0; address < 0xa9; address++) {
u8 value;
m5602_read_sensor(sd, address, &value, 1);
- info("register 0x%x contains 0x%x",
- address, value);
+ pr_info("register 0x%x contains 0x%x\n", address, value);
}
- info("ov7660 register state dump complete");
+ pr_info("ov7660 register state dump complete\n");
- info("Probing for which registers that are read/write");
+ pr_info("Probing for which registers that are read/write\n");
for (address = 0; address < 0xff; address++) {
u8 old_value, ctrl_value;
u8 test_value[2] = {0xff, 0xff};
@@ -477,9 +478,9 @@
m5602_read_sensor(sd, address, &ctrl_value, 1);
if (ctrl_value == test_value[0])
- info("register 0x%x is writeable", address);
+ pr_info("register 0x%x is writeable\n", address);
else
- info("register 0x%x is read only", address);
+ pr_info("register 0x%x is read only\n", address);
/* Restore original value */
m5602_write_sensor(sd, address, &old_value, 1);
diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c
index 703d486..2114a8b 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov9650.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "m5602_ov9650.h"
static int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
@@ -299,7 +301,7 @@
if (force_sensor) {
if (force_sensor == OV9650_SENSOR) {
- info("Forcing an %s sensor", ov9650.name);
+ pr_info("Forcing an %s sensor\n", ov9650.name);
goto sensor_found;
}
/* If we want to force another sensor,
@@ -330,7 +332,7 @@
return -ENODEV;
if ((prod_id == 0x96) && (ver_id == 0x52)) {
- info("Detected an ov9650 sensor");
+ pr_info("Detected an ov9650 sensor\n");
goto sensor_found;
}
return -ENODEV;
@@ -850,17 +852,16 @@
static void ov9650_dump_registers(struct sd *sd)
{
int address;
- info("Dumping the ov9650 register state");
+ pr_info("Dumping the ov9650 register state\n");
for (address = 0; address < 0xa9; address++) {
u8 value;
m5602_read_sensor(sd, address, &value, 1);
- info("register 0x%x contains 0x%x",
- address, value);
+ pr_info("register 0x%x contains 0x%x\n", address, value);
}
- info("ov9650 register state dump complete");
+ pr_info("ov9650 register state dump complete\n");
- info("Probing for which registers that are read/write");
+ pr_info("Probing for which registers that are read/write\n");
for (address = 0; address < 0xff; address++) {
u8 old_value, ctrl_value;
u8 test_value[2] = {0xff, 0xff};
@@ -870,9 +871,9 @@
m5602_read_sensor(sd, address, &ctrl_value, 1);
if (ctrl_value == test_value[0])
- info("register 0x%x is writeable", address);
+ pr_info("register 0x%x is writeable\n", address);
else
- info("register 0x%x is read only", address);
+ pr_info("register 0x%x is read only\n", address);
/* Restore original value */
m5602_write_sensor(sd, address, &old_value, 1);
diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c
index 1febd34..b877169 100644
--- a/drivers/media/video/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/video/gspca/m5602/m5602_po1030.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "m5602_po1030.h"
static int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
@@ -197,7 +199,7 @@
if (force_sensor) {
if (force_sensor == PO1030_SENSOR) {
- info("Forcing a %s sensor", po1030.name);
+ pr_info("Forcing a %s sensor\n", po1030.name);
goto sensor_found;
}
/* If we want to force another sensor, don't try to probe this
@@ -221,7 +223,7 @@
return -ENODEV;
if (dev_id_h == 0x30) {
- info("Detected a po1030 sensor");
+ pr_info("Detected a po1030 sensor\n");
goto sensor_found;
}
return -ENODEV;
@@ -267,7 +269,7 @@
break;
default:
- info("Invalid stream command, exiting init");
+ pr_info("Invalid stream command, exiting init\n");
return -EINVAL;
}
}
@@ -733,16 +735,15 @@
int address;
u8 value = 0;
- info("Dumping the po1030 sensor core registers");
+ pr_info("Dumping the po1030 sensor core registers\n");
for (address = 0; address < 0x7f; address++) {
m5602_read_sensor(sd, address, &value, 1);
- info("register 0x%x contains 0x%x",
- address, value);
+ pr_info("register 0x%x contains 0x%x\n", address, value);
}
- info("po1030 register state dump complete");
+ pr_info("po1030 register state dump complete\n");
- info("Probing for which registers that are read/write");
+ pr_info("Probing for which registers that are read/write\n");
for (address = 0; address < 0xff; address++) {
u8 old_value, ctrl_value;
u8 test_value[2] = {0xff, 0xff};
@@ -752,9 +753,9 @@
m5602_read_sensor(sd, address, &ctrl_value, 1);
if (ctrl_value == test_value[0])
- info("register 0x%x is writeable", address);
+ pr_info("register 0x%x is writeable\n", address);
else
- info("register 0x%x is read only", address);
+ pr_info("register 0x%x is read only\n", address);
/* Restore original value */
m5602_write_sensor(sd, address, &old_value, 1);
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index d27280b..cc8ec3f 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "m5602_s5k4aa.h"
static int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
@@ -240,7 +242,7 @@
if (force_sensor) {
if (force_sensor == S5K4AA_SENSOR) {
- info("Forcing a %s sensor", s5k4aa.name);
+ pr_info("Forcing a %s sensor\n", s5k4aa.name);
goto sensor_found;
}
/* If we want to force another sensor, don't try to probe this
@@ -276,7 +278,7 @@
data, 2);
break;
default:
- info("Invalid stream command, exiting init");
+ pr_info("Invalid stream command, exiting init\n");
return -EINVAL;
}
}
@@ -292,7 +294,7 @@
if (memcmp(prod_id, expected_prod_id, sizeof(prod_id)))
return -ENODEV;
else
- info("Detected a s5k4aa sensor");
+ pr_info("Detected a s5k4aa sensor\n");
sensor_found:
sensor_settings = kmalloc(
@@ -347,7 +349,7 @@
break;
default:
- err("Invalid stream command, exiting init");
+ pr_err("Invalid stream command, exiting init\n");
return -EINVAL;
}
}
@@ -383,7 +385,7 @@
break;
default:
- err("Invalid stream command, exiting init");
+ pr_err("Invalid stream command, exiting init\n");
return -EINVAL;
}
}
@@ -447,7 +449,7 @@
init_s5k4aa[i][1], data, 2);
break;
default:
- info("Invalid stream command, exiting init");
+ pr_info("Invalid stream command, exiting init\n");
return -EINVAL;
}
}
@@ -686,20 +688,21 @@
m5602_read_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1);
for (page = 0; page < 16; page++) {
m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1);
- info("Dumping the s5k4aa register state for page 0x%x", page);
+ pr_info("Dumping the s5k4aa register state for page 0x%x\n",
+ page);
for (address = 0; address <= 0xff; address++) {
u8 value = 0;
m5602_read_sensor(sd, address, &value, 1);
- info("register 0x%x contains 0x%x",
- address, value);
+ pr_info("register 0x%x contains 0x%x\n",
+ address, value);
}
}
- info("s5k4aa register state dump complete");
+ pr_info("s5k4aa register state dump complete\n");
for (page = 0; page < 16; page++) {
m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1);
- info("Probing for which registers that are "
- "read/write for page 0x%x", page);
+ pr_info("Probing for which registers that are read/write for page 0x%x\n",
+ page);
for (address = 0; address <= 0xff; address++) {
u8 old_value, ctrl_value, test_value = 0xff;
@@ -708,14 +711,16 @@
m5602_read_sensor(sd, address, &ctrl_value, 1);
if (ctrl_value == test_value)
- info("register 0x%x is writeable", address);
+ pr_info("register 0x%x is writeable\n",
+ address);
else
- info("register 0x%x is read only", address);
+ pr_info("register 0x%x is read only\n",
+ address);
/* Restore original value */
m5602_write_sensor(sd, address, &old_value, 1);
}
}
- info("Read/write register probing complete");
+ pr_info("Read/write register probing complete\n");
m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1);
}
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
index fbd9154..1de743a 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kthread.h>
#include "m5602_s5k83a.h"
@@ -135,7 +137,7 @@
if (force_sensor) {
if (force_sensor == S5K83A_SENSOR) {
- info("Forcing a %s sensor", s5k83a.name);
+ pr_info("Forcing a %s sensor\n", s5k83a.name);
goto sensor_found;
}
/* If we want to force another sensor, don't try to probe this
@@ -168,7 +170,7 @@
if ((prod_id == 0xff) || (ver_id == 0xff))
return -ENODEV;
else
- info("Detected a s5k83a sensor");
+ pr_info("Detected a s5k83a sensor\n");
sensor_found:
sens_priv = kmalloc(
@@ -227,7 +229,7 @@
init_s5k83a[i][1], data, 2);
break;
default:
- info("Invalid stream command, exiting init");
+ pr_info("Invalid stream command, exiting init\n");
return -EINVAL;
}
}
@@ -273,7 +275,7 @@
s5k83a_get_rotation(sd, ®);
if (previous_rotation != reg) {
previous_rotation = reg;
- info("Camera was flipped");
+ pr_info("Camera was flipped\n");
s5k83a_get_vflip((struct gspca_dev *) sd, &vflip);
s5k83a_get_hflip((struct gspca_dev *) sd, &hflip);
@@ -566,20 +568,20 @@
for (page = 0; page < 16; page++) {
m5602_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1);
- info("Dumping the s5k83a register state for page 0x%x", page);
+ pr_info("Dumping the s5k83a register state for page 0x%x\n",
+ page);
for (address = 0; address <= 0xff; address++) {
u8 val = 0;
m5602_read_sensor(sd, address, &val, 1);
- info("register 0x%x contains 0x%x",
- address, val);
+ pr_info("register 0x%x contains 0x%x\n", address, val);
}
}
- info("s5k83a register state dump complete");
+ pr_info("s5k83a register state dump complete\n");
for (page = 0; page < 16; page++) {
m5602_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1);
- info("Probing for which registers that are read/write "
- "for page 0x%x", page);
+ pr_info("Probing for which registers that are read/write for page 0x%x\n",
+ page);
for (address = 0; address <= 0xff; address++) {
u8 old_val, ctrl_val, test_val = 0xff;
@@ -588,14 +590,16 @@
m5602_read_sensor(sd, address, &ctrl_val, 1);
if (ctrl_val == test_val)
- info("register 0x%x is writeable", address);
+ pr_info("register 0x%x is writeable\n",
+ address);
else
- info("register 0x%x is read only", address);
+ pr_info("register 0x%x is read only\n",
+ address);
/* Restore original val */
m5602_write_sensor(sd, address, &old_val, 1);
}
}
- info("Read/write register probing complete");
+ pr_info("Read/write register probing complete\n");
m5602_write_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1);
}
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 0196209..ef45fa5 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "mars"
#include "gspca.h"
@@ -178,8 +180,8 @@
&alen,
500); /* timeout in milliseconds */
if (ret < 0) {
- err("reg write [%02x] error %d",
- gspca_dev->usb_buf[0], ret);
+ pr_err("reg write [%02x] error %d\n",
+ gspca_dev->usb_buf[0], ret);
gspca_dev->usb_err = ret;
}
}
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index 97e5079..473e813 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -40,6 +40,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "mr97310a"
#include "gspca.h"
@@ -267,7 +269,7 @@
usb_sndbulkpipe(gspca_dev->dev, 4),
gspca_dev->usb_buf, len, NULL, 500);
if (rc < 0)
- err("reg write [%02x] error %d",
+ pr_err("reg write [%02x] error %d\n",
gspca_dev->usb_buf[0], rc);
return rc;
}
@@ -281,7 +283,7 @@
usb_rcvbulkpipe(gspca_dev->dev, 3),
gspca_dev->usb_buf, len, NULL, 500);
if (rc < 0)
- err("reg read [%02x] error %d",
+ pr_err("reg read [%02x] error %d\n",
gspca_dev->usb_buf[0], rc);
return rc;
}
@@ -540,7 +542,7 @@
sd->sensor_type = 1;
break;
default:
- err("Unknown CIF Sensor id : %02x",
+ pr_err("Unknown CIF Sensor id : %02x\n",
gspca_dev->usb_buf[1]);
return -ENODEV;
}
@@ -575,10 +577,10 @@
sd->sensor_type = 2;
} else if ((gspca_dev->usb_buf[0] != 0x03) &&
(gspca_dev->usb_buf[0] != 0x04)) {
- err("Unknown VGA Sensor id Byte 0: %02x",
- gspca_dev->usb_buf[0]);
- err("Defaults assumed, may not work");
- err("Please report this");
+ pr_err("Unknown VGA Sensor id Byte 0: %02x\n",
+ gspca_dev->usb_buf[0]);
+ pr_err("Defaults assumed, may not work\n");
+ pr_err("Please report this\n");
}
/* Sakar Digital color needs to be adjusted. */
if ((gspca_dev->usb_buf[0] == 0x03) &&
@@ -595,10 +597,10 @@
/* Nothing to do here. */
break;
default:
- err("Unknown VGA Sensor id Byte 1: %02x",
- gspca_dev->usb_buf[1]);
- err("Defaults assumed, may not work");
- err("Please report this");
+ pr_err("Unknown VGA Sensor id Byte 1: %02x\n",
+ gspca_dev->usb_buf[1]);
+ pr_err("Defaults assumed, may not work\n");
+ pr_err("Please report this\n");
}
}
PDEBUG(D_PROBE, "MR97310A VGA camera detected, sensor: %d",
diff --git a/drivers/media/video/gspca/nw80x.c b/drivers/media/video/gspca/nw80x.c
index 8e754fd..7681814e 100644
--- a/drivers/media/video/gspca/nw80x.c
+++ b/drivers/media/video/gspca/nw80x.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "nw80x"
#include "gspca.h"
@@ -1571,7 +1573,7 @@
len,
500);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -1592,7 +1594,7 @@
0x00, index,
gspca_dev->usb_buf, len, 500);
if (ret < 0) {
- err("reg_r err %d", ret);
+ pr_err("reg_r err %d\n", ret);
gspca_dev->usb_err = ret;
return;
}
@@ -1802,7 +1804,8 @@
}
}
if (webcam_chip[sd->webcam] != sd->bridge) {
- err("Bad webcam type %d for NW80%d", sd->webcam, sd->bridge);
+ pr_err("Bad webcam type %d for NW80%d\n",
+ sd->webcam, sd->bridge);
gspca_dev->usb_err = -ENODEV;
return gspca_dev->usb_err;
}
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 18305c8..6a01b35 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -36,6 +36,9 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "ov519"
#include <linux/input.h>
@@ -2171,7 +2174,7 @@
sd->gspca_dev.usb_buf, 1, 500);
leave:
if (ret < 0) {
- err("reg_w %02x failed %d", index, ret);
+ pr_err("reg_w %02x failed %d\n", index, ret);
sd->gspca_dev.usb_err = ret;
return;
}
@@ -2210,7 +2213,7 @@
PDEBUG(D_USBI, "GET %02x 0000 %04x %02x",
req, index, ret);
} else {
- err("reg_r %02x failed %d", index, ret);
+ pr_err("reg_r %02x failed %d\n", index, ret);
sd->gspca_dev.usb_err = ret;
}
@@ -2235,7 +2238,7 @@
if (ret >= 0) {
ret = sd->gspca_dev.usb_buf[0];
} else {
- err("reg_r8 %02x failed %d", index, ret);
+ pr_err("reg_r8 %02x failed %d\n", index, ret);
sd->gspca_dev.usb_err = ret;
}
@@ -2288,7 +2291,7 @@
0, index,
sd->gspca_dev.usb_buf, n, 500);
if (ret < 0) {
- err("reg_w32 %02x failed %d", index, ret);
+ pr_err("reg_w32 %02x failed %d\n", index, ret);
sd->gspca_dev.usb_err = ret;
}
}
@@ -2457,7 +2460,7 @@
(u16) value, (u16) reg, NULL, 0, 500);
if (ret < 0) {
- err("ovfx2_i2c_w %02x failed %d", reg, ret);
+ pr_err("ovfx2_i2c_w %02x failed %d\n", reg, ret);
sd->gspca_dev.usb_err = ret;
}
@@ -2481,7 +2484,7 @@
ret = sd->gspca_dev.usb_buf[0];
PDEBUG(D_USBI, "ovfx2_i2c_r %02x %02x", reg, ret);
} else {
- err("ovfx2_i2c_r %02x failed %d", reg, ret);
+ pr_err("ovfx2_i2c_r %02x failed %d\n", reg, ret);
sd->gspca_dev.usb_err = ret;
}
@@ -2727,7 +2730,7 @@
int high, low;
if (sd->bridge != BRIDGE_OVFX2) {
- err("error hires sensors only supported with ovfx2");
+ pr_err("error hires sensors only supported with ovfx2\n");
return;
}
@@ -2762,7 +2765,7 @@
}
break;
}
- err("Error unknown sensor type: %02x%02x", high, low);
+ pr_err("Error unknown sensor type: %02x%02x\n", high, low);
}
/* This initializes the OV8110, OV8610 sensor. The OV8110 uses
@@ -2783,7 +2786,7 @@
if ((rc & 3) == 1)
sd->sensor = SEN_OV8610;
else
- err("Unknown image sensor version: %d", rc & 3);
+ pr_err("Unknown image sensor version: %d\n", rc & 3);
}
/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses
@@ -2840,8 +2843,8 @@
if (high == 0x76) {
switch (low) {
case 0x30:
- err("Sensor is an OV7630/OV7635");
- err("7630 is not supported by this driver");
+ pr_err("Sensor is an OV7630/OV7635\n");
+ pr_err("7630 is not supported by this driver\n");
return;
case 0x40:
PDEBUG(D_PROBE, "Sensor is an OV7645");
@@ -2868,7 +2871,7 @@
sd->sensor = SEN_OV7620;
}
} else {
- err("Unknown image sensor version: %d", rc & 3);
+ pr_err("Unknown image sensor version: %d\n", rc & 3);
}
}
@@ -2891,8 +2894,7 @@
switch (rc) {
case 0x00:
sd->sensor = SEN_OV6630;
- warn("WARNING: Sensor is an OV66308. Your camera may have");
- warn("been misdetected in previous driver versions.");
+ pr_warn("WARNING: Sensor is an OV66308. Your camera may have been misdetected in previous driver versions.\n");
break;
case 0x01:
sd->sensor = SEN_OV6620;
@@ -2908,11 +2910,10 @@
break;
case 0x90:
sd->sensor = SEN_OV6630;
- warn("WARNING: Sensor is an OV66307. Your camera may have");
- warn("been misdetected in previous driver versions.");
+ pr_warn("WARNING: Sensor is an OV66307. Your camera may have been misdetected in previous driver versions.\n");
break;
default:
- err("FATAL: Unknown sensor version: 0x%02x", rc);
+ pr_err("FATAL: Unknown sensor version: 0x%02x\n", rc);
return;
}
@@ -3405,7 +3406,7 @@
} else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) {
ov_hires_configure(sd);
} else {
- err("Can't determine sensor slave IDs");
+ pr_err("Can't determine sensor slave IDs\n");
goto error;
}
@@ -3590,7 +3591,7 @@
intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt) {
- err("Couldn't get altsetting");
+ pr_err("Couldn't get altsetting\n");
sd->gspca_dev.usb_err = -EIO;
return;
}
@@ -3713,7 +3714,7 @@
intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt) {
- err("Couldn't get altsetting");
+ pr_err("Couldn't get altsetting\n");
sd->gspca_dev.usb_err = -EIO;
return;
}
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 0c6369b..76907ec 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -28,6 +28,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "ov534"
#include "gspca.h"
@@ -775,7 +777,7 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
if (ret < 0) {
- err("write failed %d", ret);
+ pr_err("write failed %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -794,7 +796,7 @@
0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
PDEBUG(D_USBI, "GET 01 0000 %04x %02x", reg, gspca_dev->usb_buf[0]);
if (ret < 0) {
- err("read failed %d", ret);
+ pr_err("read failed %d\n", ret);
gspca_dev->usb_err = ret;
}
return gspca_dev->usb_buf[0];
@@ -858,7 +860,7 @@
ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3);
if (!sccb_check_status(gspca_dev)) {
- err("sccb_reg_write failed");
+ pr_err("sccb_reg_write failed\n");
gspca_dev->usb_err = -EIO;
}
}
@@ -868,11 +870,11 @@
ov534_reg_write(gspca_dev, OV534_REG_SUBADDR, reg);
ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_2);
if (!sccb_check_status(gspca_dev))
- err("sccb_reg_read failed 1");
+ pr_err("sccb_reg_read failed 1\n");
ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_READ_2);
if (!sccb_check_status(gspca_dev))
- err("sccb_reg_read failed 2");
+ pr_err("sccb_reg_read failed 2\n");
return ov534_reg_read(gspca_dev, OV534_REG_READ);
}
diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c
index aaf5428..b3b1ea6 100644
--- a/drivers/media/video/gspca/ov534_9.c
+++ b/drivers/media/video/gspca/ov534_9.c
@@ -1,7 +1,7 @@
/*
- * ov534-ov965x gspca driver
+ * ov534-ov9xxx gspca driver
*
- * Copyright (C) 2009-2010 Jean-Francois Moine http://moinejf.free.fr
+ * Copyright (C) 2009-2011 Jean-Francois Moine http://moinejf.free.fr
* Copyright (C) 2008 Antonio Ospite <ospite@studenti.unina.it>
* Copyright (C) 2008 Jim Paris <jim@jtan.com>
*
@@ -24,6 +24,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "ov534_9"
#include "gspca.h"
@@ -45,39 +47,44 @@
MODULE_DESCRIPTION("GSPCA/OV534_9 USB Camera Driver");
MODULE_LICENSE("GPL");
+/* controls */
+enum e_ctrl {
+ BRIGHTNESS,
+ CONTRAST,
+ AUTOGAIN,
+ EXPOSURE,
+ SHARPNESS,
+ SATUR,
+ LIGHTFREQ,
+ NCTRLS /* number of controls */
+};
+
/* specific webcam descriptor */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
+ struct gspca_ctrl ctrls[NCTRLS];
__u32 last_pts;
u8 last_fid;
- u8 brightness;
- u8 contrast;
- u8 autogain;
- u8 exposure;
- s8 sharpness;
- u8 satur;
- u8 freq;
+ u8 sensor;
+};
+enum sensors {
+ SENSOR_OV965x, /* ov9657 */
+ SENSOR_OV971x, /* ov9712 */
+ NSENSORS
};
/* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
+static void setbrightness(struct gspca_dev *gspca_dev);
+static void setcontrast(struct gspca_dev *gspca_dev);
+static void setautogain(struct gspca_dev *gspca_dev);
+static void setexposure(struct gspca_dev *gspca_dev);
+static void setsharpness(struct gspca_dev *gspca_dev);
+static void setsatur(struct gspca_dev *gspca_dev);
+static void setlightfreq(struct gspca_dev *gspca_dev);
-static const struct ctrl sd_ctrls[] = {
- { /* 0 */
+static const struct ctrl sd_ctrls[NCTRLS] = {
+[BRIGHTNESS] = {
{
.id = V4L2_CID_BRIGHTNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -85,13 +92,11 @@
.minimum = 0,
.maximum = 15,
.step = 1,
-#define BRIGHTNESS_DEF 7
- .default_value = BRIGHTNESS_DEF,
+ .default_value = 7
},
- .set = sd_setbrightness,
- .get = sd_getbrightness,
+ .set_control = setbrightness
},
- { /* 1 */
+[CONTRAST] = {
{
.id = V4L2_CID_CONTRAST,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -99,13 +104,11 @@
.minimum = 0,
.maximum = 15,
.step = 1,
-#define CONTRAST_DEF 3
- .default_value = CONTRAST_DEF,
+ .default_value = 3
},
- .set = sd_setcontrast,
- .get = sd_getcontrast,
+ .set_control = setcontrast
},
- { /* 2 */
+[AUTOGAIN] = {
{
.id = V4L2_CID_AUTOGAIN,
.type = V4L2_CTRL_TYPE_BOOLEAN,
@@ -116,11 +119,9 @@
#define AUTOGAIN_DEF 1
.default_value = AUTOGAIN_DEF,
},
- .set = sd_setautogain,
- .get = sd_getautogain,
+ .set_control = setautogain
},
-#define EXPO_IDX 3
- { /* 3 */
+[EXPOSURE] = {
{
.id = V4L2_CID_EXPOSURE,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -128,13 +129,11 @@
.minimum = 0,
.maximum = 3,
.step = 1,
-#define EXPO_DEF 0
- .default_value = EXPO_DEF,
+ .default_value = 0
},
- .set = sd_setexposure,
- .get = sd_getexposure,
+ .set_control = setexposure
},
- { /* 4 */
+[SHARPNESS] = {
{
.id = V4L2_CID_SHARPNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -142,13 +141,11 @@
.minimum = -1, /* -1 = auto */
.maximum = 4,
.step = 1,
-#define SHARPNESS_DEF -1
- .default_value = SHARPNESS_DEF,
+ .default_value = -1
},
- .set = sd_setsharpness,
- .get = sd_getsharpness,
+ .set_control = setsharpness
},
- { /* 5 */
+[SATUR] = {
{
.id = V4L2_CID_SATURATION,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -156,13 +153,11 @@
.minimum = 0,
.maximum = 4,
.step = 1,
-#define SATUR_DEF 2
- .default_value = SATUR_DEF,
+ .default_value = 2
},
- .set = sd_setsatur,
- .get = sd_getsatur,
+ .set_control = setsatur
},
- {
+[LIGHTFREQ] = {
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
.type = V4L2_CTRL_TYPE_MENU,
@@ -170,11 +165,9 @@
.minimum = 0,
.maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
.step = 1,
-#define FREQ_DEF 0
- .default_value = FREQ_DEF,
+ .default_value = 0
},
- .set = sd_setfreq,
- .get = sd_getfreq,
+ .set_control = setlightfreq
},
};
@@ -206,6 +199,14 @@
.colorspace = V4L2_COLORSPACE_JPEG},
};
+static const struct v4l2_pix_format ov971x_mode[] = {
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB
+ }
+};
+
static const u8 bridge_init[][2] = {
{0x88, 0xf8},
{0x89, 0xff},
@@ -240,7 +241,7 @@
{0x94, 0x11},
};
-static const u8 sensor_init[][2] = {
+static const u8 ov965x_init[][2] = {
{0x12, 0x80}, /* com7 - SSCB reset */
{0x00, 0x00}, /* gain */
{0x01, 0x80}, /* blue */
@@ -450,7 +451,7 @@
{0x94, 0x11},
};
-static const u8 sensor_init_2[][2] = {
+static const u8 ov965x_init_2[][2] = {
{0x3b, 0xc4},
{0x1e, 0x04}, /* mvfp */
{0x13, 0xe0}, /* com8 */
@@ -492,7 +493,65 @@
{0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
};
-static const u8 sensor_start_1_vga[][2] = { /* same for qvga */
+static const u8 ov971x_init[][2] = {
+ {0x12, 0x80},
+ {0x09, 0x10},
+ {0x1e, 0x07},
+ {0x5f, 0x18},
+ {0x69, 0x04},
+ {0x65, 0x2a},
+ {0x68, 0x0a},
+ {0x39, 0x28},
+ {0x4d, 0x90},
+ {0xc1, 0x80},
+ {0x0c, 0x30},
+ {0x6d, 0x02},
+ {0x96, 0xf1},
+ {0xbc, 0x68},
+ {0x12, 0x00},
+ {0x3b, 0x00},
+ {0x97, 0x80},
+ {0x17, 0x25},
+ {0x18, 0xa2},
+ {0x19, 0x01},
+ {0x1a, 0xca},
+ {0x03, 0x0a},
+ {0x32, 0x07},
+ {0x98, 0x40}, /*{0x98, 0x00},*/
+ {0x99, 0xA0}, /*{0x99, 0x00},*/
+ {0x9a, 0x01}, /*{0x9a, 0x00},*/
+ {0x57, 0x00},
+ {0x58, 0x78}, /*{0x58, 0xc8},*/
+ {0x59, 0x50}, /*{0x59, 0xa0},*/
+ {0x4c, 0x13},
+ {0x4b, 0x36},
+ {0x3d, 0x3c},
+ {0x3e, 0x03},
+ {0xbd, 0x50}, /*{0xbd, 0xa0},*/
+ {0xbe, 0x78}, /*{0xbe, 0xc8},*/
+ {0x4e, 0x55},
+ {0x4f, 0x55},
+ {0x50, 0x55},
+ {0x51, 0x55},
+ {0x24, 0x55},
+ {0x25, 0x40},
+ {0x26, 0xa1},
+ {0x5c, 0x59},
+ {0x5d, 0x00},
+ {0x11, 0x00},
+ {0x2a, 0x98},
+ {0x2b, 0x06},
+ {0x2d, 0x00},
+ {0x2e, 0x00},
+ {0x13, 0xa5},
+ {0x14, 0x40},
+ {0x4a, 0x00},
+ {0x49, 0xce},
+ {0x22, 0x03},
+ {0x09, 0x00}
+};
+
+static const u8 ov965x_start_1_vga[][2] = { /* same for qvga */
{0x12, 0x62}, /* com7 - 30fps VGA YUV */
{0x36, 0xfa}, /* aref3 */
{0x69, 0x0a}, /* hv */
@@ -515,7 +574,7 @@
{0xc0, 0xaa},
};
-static const u8 sensor_start_1_svga[][2] = {
+static const u8 ov965x_start_1_svga[][2] = {
{0x12, 0x02}, /* com7 - YUYV - VGA 15 full resolution */
{0x36, 0xf8}, /* aref3 */
{0x69, 0x02}, /* hv */
@@ -537,7 +596,7 @@
{0xc0, 0xe2},
};
-static const u8 sensor_start_1_xga[][2] = {
+static const u8 ov965x_start_1_xga[][2] = {
{0x12, 0x02}, /* com7 */
{0x36, 0xf8}, /* aref3 */
{0x69, 0x02}, /* hv */
@@ -560,7 +619,7 @@
{0xc0, 0xe2},
};
-static const u8 sensor_start_1_sxga[][2] = {
+static const u8 ov965x_start_1_sxga[][2] = {
{0x12, 0x02}, /* com7 */
{0x36, 0xf8}, /* aref3 */
{0x69, 0x02}, /* hv */
@@ -709,7 +768,7 @@
{0x94, 0x11},
};
-static const u8 sensor_start_2_qvga[][2] = {
+static const u8 ov965x_start_2_qvga[][2] = {
{0x3b, 0xe4}, /* com11 - night mode 1/4 frame rate */
{0x1e, 0x04}, /* mvfp */
{0x13, 0xe0}, /* com8 */
@@ -727,7 +786,7 @@
{0x3a, 0x80}, /* tslb - yuyv */
};
-static const u8 sensor_start_2_vga[][2] = {
+static const u8 ov965x_start_2_vga[][2] = {
{0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
{0x1e, 0x04}, /* mvfp */
{0x13, 0xe0}, /* com8 */
@@ -743,7 +802,7 @@
{0x2d, 0x00}, /* advfl */
};
-static const u8 sensor_start_2_svga[][2] = { /* same for xga */
+static const u8 ov965x_start_2_svga[][2] = { /* same for xga */
{0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
{0x1e, 0x04}, /* mvfp */
{0x13, 0xe0}, /* com8 */
@@ -757,7 +816,7 @@
{0xa3, 0x41}, /* bd60 */
};
-static const u8 sensor_start_2_sxga[][2] = {
+static const u8 ov965x_start_2_sxga[][2] = {
{0x13, 0xe0}, /* com8 */
{0x00, 0x00},
{0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
@@ -785,7 +844,7 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
if (ret < 0) {
- err("reg_w failed %d", ret);
+ pr_err("reg_w failed %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -810,7 +869,7 @@
0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
PDEBUG(D_USBI, "reg_r [%04x] -> %02x", reg, gspca_dev->usb_buf[0]);
if (ret < 0) {
- err("reg_r err %d", ret);
+ pr_err("reg_r err %d\n", ret);
gspca_dev->usb_err = ret;
}
return gspca_dev->usb_buf[0];
@@ -848,7 +907,7 @@
reg_w_i(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3);
if (!sccb_check_status(gspca_dev))
- err("sccb_write failed");
+ pr_err("sccb_write failed\n");
}
static u8 sccb_read(struct gspca_dev *gspca_dev, u16 reg)
@@ -856,11 +915,11 @@
reg_w(gspca_dev, OV534_REG_SUBADDR, reg);
reg_w(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_2);
if (!sccb_check_status(gspca_dev))
- err("sccb_read failed 1");
+ pr_err("sccb_read failed 1\n");
reg_w(gspca_dev, OV534_REG_OPERATION, OV534_OP_READ_2);
if (!sccb_check_status(gspca_dev))
- err("sccb_read failed 2");
+ pr_err("sccb_read failed 2\n");
return reg_r(gspca_dev, OV534_REG_READ);
}
@@ -922,7 +981,9 @@
struct sd *sd = (struct sd *) gspca_dev;
u8 val;
- val = sd->brightness;
+ if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS))
+ return;
+ val = sd->ctrls[BRIGHTNESS].val;
if (val < 8)
val = 15 - val; /* f .. 8 */
else
@@ -935,8 +996,10 @@
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (gspca_dev->ctrl_dis & (1 << CONTRAST))
+ return;
sccb_write(gspca_dev, 0x56, /* cnst1 - contrast 1 ctrl coeff */
- sd->contrast << 4);
+ sd->ctrls[CONTRAST].val << 4);
}
static void setautogain(struct gspca_dev *gspca_dev)
@@ -944,10 +1007,12 @@
struct sd *sd = (struct sd *) gspca_dev;
u8 val;
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN))
+ return;
/*fixme: should adjust agc/awb/aec by different controls */
val = sccb_read(gspca_dev, 0x13); /* com8 */
sccb_write(gspca_dev, 0xff, 0x00);
- if (sd->autogain)
+ if (sd->ctrls[AUTOGAIN].val)
val |= 0x05; /* agc & aec */
else
val &= 0xfa;
@@ -960,8 +1025,10 @@
u8 val;
static const u8 expo[4] = {0x00, 0x25, 0x38, 0x5e};
+ if (gspca_dev->ctrl_dis & (1 << EXPOSURE))
+ return;
sccb_write(gspca_dev, 0x10, /* aec[9:2] */
- expo[sd->exposure]);
+ expo[sd->ctrls[EXPOSURE].val]);
val = sccb_read(gspca_dev, 0x13); /* com8 */
sccb_write(gspca_dev, 0xff, 0x00);
@@ -977,7 +1044,9 @@
struct sd *sd = (struct sd *) gspca_dev;
s8 val;
- val = sd->sharpness;
+ if (gspca_dev->ctrl_dis & (1 << SHARPNESS))
+ return;
+ val = sd->ctrls[SHARPNESS].val;
if (val < 0) { /* auto */
val = sccb_read(gspca_dev, 0x42); /* com17 */
sccb_write(gspca_dev, 0xff, 0x00);
@@ -1006,8 +1075,10 @@
{0x48, 0x90}
};
- val1 = matrix[sd->satur][0];
- val2 = matrix[sd->satur][1];
+ if (gspca_dev->ctrl_dis & (1 << SATUR))
+ return;
+ val1 = matrix[sd->ctrls[SATUR].val][0];
+ val2 = matrix[sd->ctrls[SATUR].val][1];
val3 = val1 + val2;
sccb_write(gspca_dev, 0x4f, val3); /* matrix coeff */
sccb_write(gspca_dev, 0x50, val3);
@@ -1022,14 +1093,16 @@
sccb_write(gspca_dev, 0x41, val1);
}
-static void setfreq(struct gspca_dev *gspca_dev)
+static void setlightfreq(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
u8 val;
+ if (gspca_dev->ctrl_dis & (1 << LIGHTFREQ))
+ return;
val = sccb_read(gspca_dev, 0x13); /* com8 */
sccb_write(gspca_dev, 0xff, 0x00);
- if (sd->freq == 0) {
+ if (sd->ctrls[LIGHTFREQ].val == 0) {
sccb_write(gspca_dev, 0x13, val & 0xdf);
return;
}
@@ -1037,7 +1110,7 @@
val = sccb_read(gspca_dev, 0x42); /* com17 */
sccb_write(gspca_dev, 0xff, 0x00);
- if (sd->freq == 1)
+ if (sd->ctrls[LIGHTFREQ].val == 1)
val |= 0x01;
else
val &= 0xfe;
@@ -1049,34 +1122,19 @@
const struct usb_device_id *id)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct cam *cam;
- cam = &gspca_dev->cam;
+ gspca_dev->cam.ctrls = sd->ctrls;
- cam->cam_mode = ov965x_mode;
- cam->nmodes = ARRAY_SIZE(ov965x_mode);
-
- sd->brightness = BRIGHTNESS_DEF;
- sd->contrast = CONTRAST_DEF;
#if AUTOGAIN_DEF != 0
- sd->autogain = AUTOGAIN_DEF;
- gspca_dev->ctrl_inac |= (1 << EXPO_IDX);
+ gspca_dev->ctrl_inac |= (1 << EXPOSURE);
#endif
-#if EXPO_DEF != 0
- sd->exposure = EXPO_DEF;
-#endif
-#if SHARPNESS_DEF != 0
- sd->sharpness = SHARPNESS_DEF;
-#endif
- sd->satur = SATUR_DEF;
- sd->freq = FREQ_DEF;
-
return 0;
}
/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
+ struct sd *sd = (struct sd *) gspca_dev;
u16 sensor_id;
/* reset bridge */
@@ -1099,68 +1157,117 @@
PDEBUG(D_PROBE, "Sensor ID: %04x", sensor_id);
/* initialize */
- reg_w_array(gspca_dev, bridge_init,
- ARRAY_SIZE(bridge_init));
- sccb_w_array(gspca_dev, sensor_init,
- ARRAY_SIZE(sensor_init));
- reg_w_array(gspca_dev, bridge_init_2,
- ARRAY_SIZE(bridge_init_2));
- sccb_w_array(gspca_dev, sensor_init_2,
- ARRAY_SIZE(sensor_init_2));
- reg_w(gspca_dev, 0xe0, 0x00);
- reg_w(gspca_dev, 0xe0, 0x01);
- set_led(gspca_dev, 0);
- reg_w(gspca_dev, 0xe0, 0x00);
+ if ((sensor_id & 0xfff0) == 0x9650) {
+ sd->sensor = SENSOR_OV965x;
+
+ gspca_dev->cam.cam_mode = ov965x_mode;
+ gspca_dev->cam.nmodes = ARRAY_SIZE(ov965x_mode);
+
+ reg_w_array(gspca_dev, bridge_init,
+ ARRAY_SIZE(bridge_init));
+ sccb_w_array(gspca_dev, ov965x_init,
+ ARRAY_SIZE(ov965x_init));
+ reg_w_array(gspca_dev, bridge_init_2,
+ ARRAY_SIZE(bridge_init_2));
+ sccb_w_array(gspca_dev, ov965x_init_2,
+ ARRAY_SIZE(ov965x_init_2));
+ reg_w(gspca_dev, 0xe0, 0x00);
+ reg_w(gspca_dev, 0xe0, 0x01);
+ set_led(gspca_dev, 0);
+ reg_w(gspca_dev, 0xe0, 0x00);
+ } else if ((sensor_id & 0xfff0) == 0x9710) {
+ const char *p;
+ int l;
+
+ sd->sensor = SENSOR_OV971x;
+
+ gspca_dev->cam.cam_mode = ov971x_mode;
+ gspca_dev->cam.nmodes = ARRAY_SIZE(ov971x_mode);
+
+ /* no control yet */
+ gspca_dev->ctrl_dis = (1 << NCTRLS) - 1;
+
+ gspca_dev->cam.bulk = 1;
+ gspca_dev->cam.bulk_size = 16384;
+ gspca_dev->cam.bulk_nurbs = 2;
+
+ sccb_w_array(gspca_dev, ov971x_init,
+ ARRAY_SIZE(ov971x_init));
+
+ /* set video format on bridge processor */
+ /* access bridge processor's video format registers at: 0x00 */
+ reg_w(gspca_dev, 0x1c, 0x00);
+ /*set register: 0x00 is 'RAW8', 0x40 is 'YUV422' (YUYV?)*/
+ reg_w(gspca_dev, 0x1d, 0x00);
+
+ /* Will W. specific stuff
+ * set VSYNC to
+ * output (0x1f) if first webcam
+ * input (0x17) if 2nd or 3rd webcam */
+ p = video_device_node_name(&gspca_dev->vdev);
+ l = strlen(p) - 1;
+ if (p[l] == '0')
+ reg_w(gspca_dev, 0x56, 0x1f);
+ else
+ reg_w(gspca_dev, 0x56, 0x17);
+ } else {
+ err("Unknown sensor %04x", sensor_id);
+ return -EINVAL;
+ }
return gspca_dev->usb_err;
}
static int sd_start(struct gspca_dev *gspca_dev)
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_OV971x)
+ return gspca_dev->usb_err;
switch (gspca_dev->curr_mode) {
case QVGA_MODE: /* 320x240 */
- sccb_w_array(gspca_dev, sensor_start_1_vga,
- ARRAY_SIZE(sensor_start_1_vga));
+ sccb_w_array(gspca_dev, ov965x_start_1_vga,
+ ARRAY_SIZE(ov965x_start_1_vga));
reg_w_array(gspca_dev, bridge_start_qvga,
ARRAY_SIZE(bridge_start_qvga));
- sccb_w_array(gspca_dev, sensor_start_2_qvga,
- ARRAY_SIZE(sensor_start_2_qvga));
+ sccb_w_array(gspca_dev, ov965x_start_2_qvga,
+ ARRAY_SIZE(ov965x_start_2_qvga));
break;
case VGA_MODE: /* 640x480 */
- sccb_w_array(gspca_dev, sensor_start_1_vga,
- ARRAY_SIZE(sensor_start_1_vga));
+ sccb_w_array(gspca_dev, ov965x_start_1_vga,
+ ARRAY_SIZE(ov965x_start_1_vga));
reg_w_array(gspca_dev, bridge_start_vga,
ARRAY_SIZE(bridge_start_vga));
- sccb_w_array(gspca_dev, sensor_start_2_vga,
- ARRAY_SIZE(sensor_start_2_vga));
+ sccb_w_array(gspca_dev, ov965x_start_2_vga,
+ ARRAY_SIZE(ov965x_start_2_vga));
break;
case SVGA_MODE: /* 800x600 */
- sccb_w_array(gspca_dev, sensor_start_1_svga,
- ARRAY_SIZE(sensor_start_1_svga));
+ sccb_w_array(gspca_dev, ov965x_start_1_svga,
+ ARRAY_SIZE(ov965x_start_1_svga));
reg_w_array(gspca_dev, bridge_start_svga,
ARRAY_SIZE(bridge_start_svga));
- sccb_w_array(gspca_dev, sensor_start_2_svga,
- ARRAY_SIZE(sensor_start_2_svga));
+ sccb_w_array(gspca_dev, ov965x_start_2_svga,
+ ARRAY_SIZE(ov965x_start_2_svga));
break;
case XGA_MODE: /* 1024x768 */
- sccb_w_array(gspca_dev, sensor_start_1_xga,
- ARRAY_SIZE(sensor_start_1_xga));
+ sccb_w_array(gspca_dev, ov965x_start_1_xga,
+ ARRAY_SIZE(ov965x_start_1_xga));
reg_w_array(gspca_dev, bridge_start_xga,
ARRAY_SIZE(bridge_start_xga));
- sccb_w_array(gspca_dev, sensor_start_2_svga,
- ARRAY_SIZE(sensor_start_2_svga));
+ sccb_w_array(gspca_dev, ov965x_start_2_svga,
+ ARRAY_SIZE(ov965x_start_2_svga));
break;
default:
/* case SXGA_MODE: * 1280x1024 */
- sccb_w_array(gspca_dev, sensor_start_1_sxga,
- ARRAY_SIZE(sensor_start_1_sxga));
+ sccb_w_array(gspca_dev, ov965x_start_1_sxga,
+ ARRAY_SIZE(ov965x_start_1_sxga));
reg_w_array(gspca_dev, bridge_start_sxga,
ARRAY_SIZE(bridge_start_sxga));
- sccb_w_array(gspca_dev, sensor_start_2_sxga,
- ARRAY_SIZE(sensor_start_2_sxga));
+ sccb_w_array(gspca_dev, ov965x_start_2_sxga,
+ ARRAY_SIZE(ov965x_start_2_sxga));
break;
}
- setfreq(gspca_dev);
+ setlightfreq(gspca_dev);
setautogain(gspca_dev);
setbrightness(gspca_dev);
setcontrast(gspca_dev);
@@ -1198,9 +1305,11 @@
__u32 this_pts;
u8 this_fid;
int remaining_len = len;
+ int payload_len;
+ payload_len = gspca_dev->cam.bulk ? 2048 : 2040;
do {
- len = min(remaining_len, 2040);
+ len = min(remaining_len, payload_len);
/* Payloads are prefixed with a UVC-style header. We
consider a frame to start when the FID toggles, or the PTS
@@ -1262,138 +1371,6 @@
} while (remaining_len > 0);
}
-/* controls */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->brightness = val;
- if (gspca_dev->streaming)
- setbrightness(gspca_dev);
- return gspca_dev->usb_err;
-}
-
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->brightness;
- return 0;
-}
-
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->contrast = val;
- if (gspca_dev->streaming)
- setcontrast(gspca_dev);
- return gspca_dev->usb_err;
-}
-
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->contrast;
- return 0;
-}
-
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->autogain = val;
-
- if (gspca_dev->streaming) {
- if (val)
- gspca_dev->ctrl_inac |= (1 << EXPO_IDX);
- else
- gspca_dev->ctrl_inac &= ~(1 << EXPO_IDX);
- setautogain(gspca_dev);
- }
- return gspca_dev->usb_err;
-}
-
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->autogain;
- return 0;
-}
-
-static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->exposure = val;
- if (gspca_dev->streaming)
- setexposure(gspca_dev);
- return gspca_dev->usb_err;
-}
-
-static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->exposure;
- return 0;
-}
-
-static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->sharpness = val;
- if (gspca_dev->streaming)
- setsharpness(gspca_dev);
- return gspca_dev->usb_err;
-}
-
-static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->sharpness;
- return 0;
-}
-
-static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->satur = val;
- if (gspca_dev->streaming)
- setsatur(gspca_dev);
- return gspca_dev->usb_err;
-}
-
-static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->satur;
- return 0;
-}
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->freq = val;
- if (gspca_dev->streaming)
- setfreq(gspca_dev);
- return gspca_dev->usb_err;
-}
-
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->freq;
- return 0;
-}
-
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu)
{
@@ -1419,7 +1396,7 @@
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
- .nctrls = ARRAY_SIZE(sd_ctrls),
+ .nctrls = NCTRLS,
.config = sd_config,
.init = sd_init,
.start = sd_start,
@@ -1430,6 +1407,7 @@
/* -- module initialisation -- */
static const struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x05a9, 0x8065)},
{USB_DEVICE(0x06f8, 0x3003)},
{}
};
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 81739a2..1600df1 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -23,6 +23,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "pac207"
#include <linux/input.h>
@@ -178,8 +180,8 @@
0x00, index,
gspca_dev->usb_buf, length, PAC207_CTRL_TIMEOUT);
if (err < 0)
- err("Failed to write registers to index 0x%04X, error %d)",
- index, err);
+ pr_err("Failed to write registers to index 0x%04X, error %d\n",
+ index, err);
return err;
}
@@ -194,8 +196,8 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
value, index, NULL, 0, PAC207_CTRL_TIMEOUT);
if (err)
- err("Failed to write a register (index 0x%04X,"
- " value 0x%02X, error %d)", index, value, err);
+ pr_err("Failed to write a register (index 0x%04X, value 0x%02X, error %d)\n",
+ index, value, err);
return err;
}
@@ -210,8 +212,8 @@
0x00, index,
gspca_dev->usb_buf, 1, PAC207_CTRL_TIMEOUT);
if (res < 0) {
- err("Failed to read a register (index 0x%04X, error %d)",
- index, res);
+ pr_err("Failed to read a register (index 0x%04X, error %d)\n",
+ index, res);
return res;
}
diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c
index 5615d7b..1c44f78 100644
--- a/drivers/media/video/gspca/pac7302.c
+++ b/drivers/media/video/gspca/pac7302.c
@@ -61,6 +61,8 @@
3 | 0x21 | sethvflip()
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "pac7302"
#include <linux/input.h>
@@ -408,8 +410,8 @@
index, gspca_dev->usb_buf, len,
500);
if (ret < 0) {
- err("reg_w_buf failed index 0x%02x, error %d",
- index, ret);
+ pr_err("reg_w_buf failed index 0x%02x, error %d\n",
+ index, ret);
gspca_dev->usb_err = ret;
}
}
@@ -431,8 +433,8 @@
0, index, gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_w() failed index 0x%02x, value 0x%02x, error %d",
- index, value, ret);
+ pr_err("reg_w() failed index 0x%02x, value 0x%02x, error %d\n",
+ index, value, ret);
gspca_dev->usb_err = ret;
}
}
@@ -466,9 +468,8 @@
0, index, gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_w_page() failed index 0x%02x, "
- "value 0x%02x, error %d",
- index, page[index], ret);
+ pr_err("reg_w_page() failed index 0x%02x, value 0x%02x, error %d\n",
+ index, page[index], ret);
gspca_dev->usb_err = ret;
break;
}
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index f8801b5..7509d05 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -49,6 +49,8 @@
for max gain, 0x14 for minimal gain.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "pac7311"
#include <linux/input.h>
@@ -276,8 +278,8 @@
index, gspca_dev->usb_buf, len,
500);
if (ret < 0) {
- err("reg_w_buf() failed index 0x%02x, error %d",
- index, ret);
+ pr_err("reg_w_buf() failed index 0x%02x, error %d\n",
+ index, ret);
gspca_dev->usb_err = ret;
}
}
@@ -299,8 +301,8 @@
0, index, gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_w() failed index 0x%02x, value 0x%02x, error %d",
- index, value, ret);
+ pr_err("reg_w() failed index 0x%02x, value 0x%02x, error %d\n",
+ index, value, ret);
gspca_dev->usb_err = ret;
}
}
@@ -334,9 +336,8 @@
0, index, gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_w_page() failed index 0x%02x, "
- "value 0x%02x, error %d",
- index, page[index], ret);
+ pr_err("reg_w_page() failed index 0x%02x, value 0x%02x, error %d\n",
+ index, page[index], ret);
gspca_dev->usb_err = ret;
break;
}
diff --git a/drivers/media/video/gspca/se401.c b/drivers/media/video/gspca/se401.c
index 4c283c2..3b71bbc 100644
--- a/drivers/media/video/gspca/se401.c
+++ b/drivers/media/video/gspca/se401.c
@@ -23,6 +23,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "se401"
#define BULK_SIZE 4096
@@ -144,8 +146,8 @@
value, 0, NULL, 0, 1000);
if (err < 0) {
if (!silent)
- err("write req failed req %#04x val %#04x error %d",
- req, value, err);
+ pr_err("write req failed req %#04x val %#04x error %d\n",
+ req, value, err);
gspca_dev->usb_err = err;
}
}
@@ -158,7 +160,7 @@
return;
if (USB_BUF_SZ < READ_REQ_SIZE) {
- err("USB_BUF_SZ too small!!");
+ pr_err("USB_BUF_SZ too small!!\n");
gspca_dev->usb_err = -ENOBUFS;
return;
}
@@ -169,7 +171,8 @@
0, 0, gspca_dev->usb_buf, READ_REQ_SIZE, 1000);
if (err < 0) {
if (!silent)
- err("read req failed req %#04x error %d", req, err);
+ pr_err("read req failed req %#04x error %d\n",
+ req, err);
gspca_dev->usb_err = err;
}
}
@@ -188,8 +191,8 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
param, selector, NULL, 0, 1000);
if (err < 0) {
- err("set feature failed sel %#04x param %#04x error %d",
- selector, param, err);
+ pr_err("set feature failed sel %#04x param %#04x error %d\n",
+ selector, param, err);
gspca_dev->usb_err = err;
}
}
@@ -202,7 +205,7 @@
return gspca_dev->usb_err;
if (USB_BUF_SZ < 2) {
- err("USB_BUF_SZ too small!!");
+ pr_err("USB_BUF_SZ too small!!\n");
gspca_dev->usb_err = -ENOBUFS;
return gspca_dev->usb_err;
}
@@ -213,7 +216,8 @@
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, selector, gspca_dev->usb_buf, 2, 1000);
if (err < 0) {
- err("get feature failed sel %#04x error %d", selector, err);
+ pr_err("get feature failed sel %#04x error %d\n",
+ selector, err);
gspca_dev->usb_err = err;
return err;
}
@@ -300,21 +304,21 @@
return gspca_dev->usb_err;
if (cd[1] != 0x41) {
- err("Wrong descriptor type");
+ pr_err("Wrong descriptor type\n");
return -ENODEV;
}
if (!(cd[2] & SE401_FORMAT_BAYER)) {
- err("Bayer format not supported!");
+ pr_err("Bayer format not supported!\n");
return -ENODEV;
}
if (cd[3])
- info("ExtraFeatures: %d", cd[3]);
+ pr_info("ExtraFeatures: %d\n", cd[3]);
n = cd[4] | (cd[5] << 8);
if (n > MAX_MODES) {
- err("Too many frame sizes");
+ pr_err("Too many frame sizes\n");
return -ENODEV;
}
@@ -353,15 +357,16 @@
sd->fmts[i].pixelformat = V4L2_PIX_FMT_SBGGR8;
sd->fmts[i].bytesperline = widths[i];
sd->fmts[i].sizeimage = widths[i] * heights[i];
- info("Frame size: %dx%d bayer", widths[i], heights[i]);
+ pr_info("Frame size: %dx%d bayer\n",
+ widths[i], heights[i]);
} else {
/* Found a match use janggu compression */
sd->fmts[i].pixelformat = V4L2_PIX_FMT_SE401;
sd->fmts[i].bytesperline = 0;
sd->fmts[i].sizeimage = widths[i] * heights[i] * 3;
- info("Frame size: %dx%d 1/%dth janggu",
- widths[i], heights[i],
- sd->fmts[i].priv * sd->fmts[i].priv);
+ pr_info("Frame size: %dx%d 1/%dth janggu\n",
+ widths[i], heights[i],
+ sd->fmts[i].priv * sd->fmts[i].priv);
}
}
@@ -571,11 +576,12 @@
plen = ((bits + 47) >> 4) << 1;
/* Sanity checks */
if (plen > 1024) {
- err("invalid packet len %d restarting stream", plen);
+ pr_err("invalid packet len %d restarting stream\n",
+ plen);
goto error;
}
if (info == 3) {
- err("unknown frame info value restarting stream");
+ pr_err("unknown frame info value restarting stream\n");
goto error;
}
@@ -599,8 +605,8 @@
break;
case 1: /* EOF */
if (sd->pixels_read != imagesize) {
- err("frame size %d expected %d",
- sd->pixels_read, imagesize);
+ pr_err("frame size %d expected %d\n",
+ sd->pixels_read, imagesize);
goto error;
}
sd_complete_frame(gspca_dev, sd->packet, plen);
diff --git a/drivers/media/video/gspca/sn9c2028.c b/drivers/media/video/gspca/sn9c2028.c
index 4271f86..48aae39 100644
--- a/drivers/media/video/gspca/sn9c2028.c
+++ b/drivers/media/video/gspca/sn9c2028.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "sn9c2028"
#include "gspca.h"
@@ -75,8 +77,8 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
2, 0, gspca_dev->usb_buf, 6, 500);
if (rc < 0) {
- err("command write [%02x] error %d",
- gspca_dev->usb_buf[0], rc);
+ pr_err("command write [%02x] error %d\n",
+ gspca_dev->usb_buf[0], rc);
return rc;
}
@@ -93,7 +95,7 @@
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
1, 0, gspca_dev->usb_buf, 1, 500);
if (rc != 1) {
- err("read1 error %d", rc);
+ pr_err("read1 error %d\n", rc);
return (rc < 0) ? rc : -EIO;
}
PDEBUG(D_USBI, "read1 response %02x", gspca_dev->usb_buf[0]);
@@ -109,7 +111,7 @@
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
4, 0, gspca_dev->usb_buf, 4, 500);
if (rc != 4) {
- err("read4 error %d", rc);
+ pr_err("read4 error %d\n", rc);
return (rc < 0) ? rc : -EIO;
}
memcpy(reading, gspca_dev->usb_buf, 4);
@@ -131,7 +133,7 @@
for (i = 0; i < 256 && status < 2; i++)
status = sn9c2028_read1(gspca_dev);
if (status != 2) {
- err("long command status read error %d", status);
+ pr_err("long command status read error %d\n", status);
return (status < 0) ? status : -EIO;
}
@@ -638,7 +640,7 @@
err_code = start_vivitar_cam(gspca_dev);
break;
default:
- err("Starting unknown camera, please report this");
+ pr_err("Starting unknown camera, please report this\n");
return -ENXIO;
}
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index c431900..86e07a1 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/input.h>
#include "gspca.h"
@@ -1123,7 +1125,7 @@
length,
500);
if (unlikely(result < 0 || result != length)) {
- err("Read register failed 0x%02X", reg);
+ pr_err("Read register failed 0x%02X\n", reg);
return -EIO;
}
return 0;
@@ -1144,7 +1146,7 @@
length,
500);
if (unlikely(result < 0 || result != length)) {
- err("Write register failed index 0x%02X", reg);
+ pr_err("Write register failed index 0x%02X\n", reg);
return -EIO;
}
return 0;
@@ -1275,14 +1277,14 @@
return -EINVAL;
if (id != 0x7fa2) {
- err("sensor id for ov9650 doesn't match (0x%04x)", id);
+ pr_err("sensor id for ov9650 doesn't match (0x%04x)\n", id);
return -ENODEV;
}
for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
if (i2c_w1(gspca_dev, ov9650_init[i].reg,
ov9650_init[i].val) < 0) {
- err("OV9650 sensor initialization failed");
+ pr_err("OV9650 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1299,7 +1301,7 @@
for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) {
if (i2c_w1(gspca_dev, ov9655_init[i].reg,
ov9655_init[i].val) < 0) {
- err("OV9655 sensor initialization failed");
+ pr_err("OV9655 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1318,7 +1320,7 @@
for (i = 0; i < ARRAY_SIZE(soi968_init); i++) {
if (i2c_w1(gspca_dev, soi968_init[i].reg,
soi968_init[i].val) < 0) {
- err("SOI968 sensor initialization failed");
+ pr_err("SOI968 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1338,7 +1340,7 @@
for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) {
if (i2c_w1(gspca_dev, ov7660_init[i].reg,
ov7660_init[i].val) < 0) {
- err("OV7660 sensor initialization failed");
+ pr_err("OV7660 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1355,7 +1357,7 @@
for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) {
if (i2c_w1(gspca_dev, ov7670_init[i].reg,
ov7670_init[i].val) < 0) {
- err("OV7670 sensor initialization failed");
+ pr_err("OV7670 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1379,14 +1381,14 @@
for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) {
if (i2c_w2(gspca_dev, mt9v011_init[i].reg,
mt9v011_init[i].val) < 0) {
- err("MT9V011 sensor initialization failed");
+ pr_err("MT9V011 sensor initialization failed\n");
return -ENODEV;
}
}
sd->hstart = 2;
sd->vstart = 2;
sd->sensor = SENSOR_MT9V011;
- info("MT9V011 sensor detected");
+ pr_info("MT9V011 sensor detected\n");
return 0;
}
@@ -1397,7 +1399,7 @@
for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) {
if (i2c_w2(gspca_dev, mt9v111_init[i].reg,
mt9v111_init[i].val) < 0) {
- err("MT9V111 sensor initialization failed");
+ pr_err("MT9V111 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1407,7 +1409,7 @@
sd->hstart = 2;
sd->vstart = 2;
sd->sensor = SENSOR_MT9V111;
- info("MT9V111 sensor detected");
+ pr_info("MT9V111 sensor detected\n");
return 0;
}
@@ -1422,14 +1424,14 @@
for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) {
if (i2c_w2(gspca_dev, mt9v112_init[i].reg,
mt9v112_init[i].val) < 0) {
- err("MT9V112 sensor initialization failed");
+ pr_err("MT9V112 sensor initialization failed\n");
return -ENODEV;
}
}
sd->hstart = 6;
sd->vstart = 2;
sd->sensor = SENSOR_MT9V112;
- info("MT9V112 sensor detected");
+ pr_info("MT9V112 sensor detected\n");
return 0;
}
@@ -1443,7 +1445,7 @@
for (i = 0; i < ARRAY_SIZE(mt9m112_init); i++) {
if (i2c_w2(gspca_dev, mt9m112_init[i].reg,
mt9m112_init[i].val) < 0) {
- err("MT9M112 sensor initialization failed");
+ pr_err("MT9M112 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1461,7 +1463,7 @@
for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) {
if (i2c_w2(gspca_dev, mt9m111_init[i].reg,
mt9m111_init[i].val) < 0) {
- err("MT9M111 sensor initialization failed");
+ pr_err("MT9M111 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1485,20 +1487,20 @@
switch (id) {
case 0x8411:
case 0x8421:
- info("MT9M001 color sensor detected");
+ pr_info("MT9M001 color sensor detected\n");
break;
case 0x8431:
- info("MT9M001 mono sensor detected");
+ pr_info("MT9M001 mono sensor detected\n");
break;
default:
- err("No MT9M001 chip detected, ID = %x\n", id);
+ pr_err("No MT9M001 chip detected, ID = %x\n\n", id);
return -ENODEV;
}
for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
if (i2c_w2(gspca_dev, mt9m001_init[i].reg,
mt9m001_init[i].val) < 0) {
- err("MT9M001 sensor initialization failed");
+ pr_err("MT9M001 sensor initialization failed\n");
return -ENODEV;
}
}
@@ -1517,7 +1519,7 @@
for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) {
if (i2c_w1(gspca_dev, hv7131r_init[i].reg,
hv7131r_init[i].val) < 0) {
- err("HV7131R Sensor initialization failed");
+ pr_err("HV7131R Sensor initialization failed\n");
return -ENODEV;
}
}
@@ -2103,7 +2105,7 @@
for (i = 0; i < ARRAY_SIZE(bridge_init); i++) {
value = bridge_init[i][1];
if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) {
- err("Device initialization failed");
+ pr_err("Device initialization failed\n");
return -ENODEV;
}
}
@@ -2114,7 +2116,7 @@
reg_w1(gspca_dev, 0x1006, 0x20);
if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) {
- err("Device initialization failed");
+ pr_err("Device initialization failed\n");
return -ENODEV;
}
@@ -2122,27 +2124,27 @@
case SENSOR_OV9650:
if (ov9650_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("OV9650 sensor detected");
+ pr_info("OV9650 sensor detected\n");
break;
case SENSOR_OV9655:
if (ov9655_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("OV9655 sensor detected");
+ pr_info("OV9655 sensor detected\n");
break;
case SENSOR_SOI968:
if (soi968_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("SOI968 sensor detected");
+ pr_info("SOI968 sensor detected\n");
break;
case SENSOR_OV7660:
if (ov7660_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("OV7660 sensor detected");
+ pr_info("OV7660 sensor detected\n");
break;
case SENSOR_OV7670:
if (ov7670_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("OV7670 sensor detected");
+ pr_info("OV7670 sensor detected\n");
break;
case SENSOR_MT9VPRB:
if (mt9v_init_sensor(gspca_dev) < 0)
@@ -2151,12 +2153,12 @@
case SENSOR_MT9M111:
if (mt9m111_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("MT9M111 sensor detected");
+ pr_info("MT9M111 sensor detected\n");
break;
case SENSOR_MT9M112:
if (mt9m112_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("MT9M112 sensor detected");
+ pr_info("MT9M112 sensor detected\n");
break;
case SENSOR_MT9M001:
if (mt9m001_init_sensor(gspca_dev) < 0)
@@ -2165,10 +2167,10 @@
case SENSOR_HV7131R:
if (hv7131r_init_sensor(gspca_dev) < 0)
return -ENODEV;
- info("HV7131R sensor detected");
+ pr_info("HV7131R sensor detected\n");
break;
default:
- info("Unsupported Sensor");
+ pr_info("Unsupported Sensor\n");
return -ENODEV;
}
@@ -2263,19 +2265,19 @@
switch (mode & SCALE_MASK) {
case SCALE_1280x1024:
scale = 0xc0;
- info("Set 1280x1024");
+ pr_info("Set 1280x1024\n");
break;
case SCALE_640x480:
scale = 0x80;
- info("Set 640x480");
+ pr_info("Set 640x480\n");
break;
case SCALE_320x240:
scale = 0x90;
- info("Set 320x240");
+ pr_info("Set 320x240\n");
break;
case SCALE_160x120:
scale = 0xa0;
- info("Set 160x120");
+ pr_info("Set 160x120\n");
break;
}
@@ -2513,7 +2515,7 @@
{USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)},
{USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)},
{USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)},
- {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, LED_REVERSE)},
{USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, LED_REVERSE)},
{USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)},
{USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)},
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index c477ad1..c746bf1 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1,7 +1,7 @@
/*
* Sonix sn9c102p sn9c105 sn9c120 (jpeg) subdriver
*
- * Copyright (C) 2009-2010 Jean-François Moine <http://moinejf.free.fr>
+ * Copyright (C) 2009-2011 Jean-François Moine <http://moinejf.free.fr>
* Copyright (C) 2005 Michel Xhaard mxhaard@magic.fr
*
* This program is free software; you can redistribute it and/or modify
@@ -19,6 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "sonixj"
#include <linux/input.h>
@@ -136,7 +138,7 @@
static void setfreq(struct gspca_dev *gspca_dev);
static const struct ctrl sd_ctrls[NCTRLS] = {
-[BRIGHTNESS] = {
+[BRIGHTNESS] = {
{
.id = V4L2_CID_BRIGHTNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -157,7 +159,7 @@
#define CONTRAST_MAX 127
.maximum = CONTRAST_MAX,
.step = 1,
- .default_value = 63,
+ .default_value = 20,
},
.set_control = setcontrast
},
@@ -737,7 +739,7 @@
{0xd1, 0x5d, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xd1, 0x5d, 0x24, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xd1, 0x5d, 0x26, 0x00, 0x00, 0x00, 0x24, 0x10},
- {0xd1, 0x5d, 0x2f, 0xf7, 0xB0, 0x00, 0x04, 0x10},
+ {0xd1, 0x5d, 0x2f, 0xf7, 0xb0, 0x00, 0x04, 0x10},
{0xd1, 0x5d, 0x31, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xd1, 0x5d, 0x33, 0x00, 0x00, 0x01, 0x00, 0x10},
{0xb1, 0x5d, 0x3d, 0x06, 0x8f, 0x00, 0x00, 0x10},
@@ -1277,7 +1279,7 @@
/* global gain ? : 07 - change with 0x15 at the end */
{0xa1, 0x21, 0x10, 0x3f, 0x00, 0x00, 0x00, 0x10}, /* ???? : 063f */
{0xa1, 0x21, 0x04, 0x06, 0x00, 0x00, 0x00, 0x10},
- {0xb1, 0x21, 0x2d, 0x00, 0x02, 0x00, 0x00, 0x10},
+ {0xb1, 0x21, 0x2d, 0x63, 0x03, 0x00, 0x00, 0x10},
/* exposure ? : 0200 - change with 0x1e at the end */
{}
};
@@ -1395,7 +1397,7 @@
return;
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
- err("reg_r: buffer overflow");
+ pr_err("reg_r: buffer overflow\n");
return;
}
#endif
@@ -1408,7 +1410,7 @@
500);
PDEBUG(D_USBI, "reg_r [%02x] -> %02x", value, gspca_dev->usb_buf[0]);
if (ret < 0) {
- err("reg_r err %d", ret);
+ pr_err("reg_r err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -1432,7 +1434,7 @@
gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_w1 err %d", ret);
+ pr_err("reg_w1 err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -1449,7 +1451,7 @@
value, buffer[0], buffer[1]);
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
- err("reg_w: buffer overflow");
+ pr_err("reg_w: buffer overflow\n");
return;
}
#endif
@@ -1462,7 +1464,7 @@
gspca_dev->usb_buf, len,
500);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -1502,7 +1504,7 @@
gspca_dev->usb_buf, 8,
500);
if (ret < 0) {
- err("i2c_w1 err %d", ret);
+ pr_err("i2c_w1 err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -1527,7 +1529,7 @@
500);
msleep(2);
if (ret < 0) {
- err("i2c_w8 err %d", ret);
+ pr_err("i2c_w8 err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -1591,7 +1593,7 @@
PDEBUG(D_PROBE, "Sensor HV7131R found");
return;
}
- warn("Erroneous HV7131R ID 0x%02x 0x%02x 0x%02x",
+ pr_warn("Erroneous HV7131R ID 0x%02x 0x%02x 0x%02x\n",
gspca_dev->usb_buf[0], gspca_dev->usb_buf[1],
gspca_dev->usb_buf[2]);
}
@@ -1710,7 +1712,7 @@
sd->sensor = SENSOR_PO1030;
return;
}
- err("Unknown sensor %04x", val);
+ pr_err("Unknown sensor %04x\n", val);
}
/* 0c45:6142 sensor may be po2030n, gc0305 or gc0307 */
@@ -1748,7 +1750,7 @@
PDEBUG(D_PROBE, "Sensor po2030n");
/* sd->sensor = SENSOR_PO2030N; */
} else {
- err("Unknown sensor ID %04x", val);
+ pr_err("Unknown sensor ID %04x\n", val);
}
}
@@ -2006,8 +2008,7 @@
case SENSOR_OM6802:
expo = brightness << 2;
sd->exposure = setexposure(gspca_dev, expo);
- k2 = brightness >> 3;
- break;
+ return; /* Y offset already set */
}
reg_w1(gspca_dev, 0x96, k2); /* color matrix Y offset */
@@ -2019,13 +2020,13 @@
u8 k2;
u8 contrast[6];
- k2 = sd->ctrls[CONTRAST].val * 0x30 / (CONTRAST_MAX + 1)
- + 0x10; /* 10..40 */
+ k2 = sd->ctrls[CONTRAST].val * 37 / (CONTRAST_MAX + 1)
+ + 37; /* 37..73 */
contrast[0] = (k2 + 1) / 2; /* red */
contrast[1] = 0;
contrast[2] = k2; /* green */
contrast[3] = 0;
- contrast[4] = (k2 + 1) / 5; /* blue */
+ contrast[4] = k2 / 5; /* blue */
contrast[5] = 0;
reg_w(gspca_dev, 0x84, contrast, sizeof contrast);
}
@@ -2507,9 +2508,7 @@
break;
case SENSOR_HV7131R:
case SENSOR_MI0360:
- if (mode)
- reg01 |= SYS_SEL_48M; /* 320x240: clk 48Mhz */
- else
+ if (!mode)
reg01 &= ~SYS_SEL_48M; /* 640x480: clk 24Mhz */
reg17 &= ~MCK_SIZE_MASK;
reg17 |= 0x01; /* clock / 1 */
diff --git a/drivers/media/video/gspca/spca1528.c b/drivers/media/video/gspca/spca1528.c
index 76c006b..6956731 100644
--- a/drivers/media/video/gspca/spca1528.c
+++ b/drivers/media/video/gspca/spca1528.c
@@ -1,7 +1,7 @@
/*
* spca1528 subdriver
*
- * Copyright (C) 2010 Jean-Francois Moine (http://moinejf.free.fr)
+ * Copyright (C) 2010-2011 Jean-Francois Moine (http://moinejf.free.fr)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "spca1528"
#include "gspca.h"
@@ -171,7 +173,7 @@
PDEBUG(D_USBI, "GET %02x 0000 %04x %02x", req, index,
gspca_dev->usb_buf[0]);
if (ret < 0) {
- err("reg_r err %d", ret);
+ pr_err("reg_r err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -193,7 +195,7 @@
value, index,
NULL, 0, 500);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -217,21 +219,23 @@
value, index,
gspca_dev->usb_buf, 1, 500);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
static void wait_status_0(struct gspca_dev *gspca_dev)
{
- int i;
+ int i, w;
- i = 20;
+ i = 16;
+ w = 0;
do {
reg_r(gspca_dev, 0x21, 0x0000, 1);
if (gspca_dev->usb_buf[0] == 0)
return;
- msleep(30);
+ w += 15;
+ msleep(w);
} while (--i > 0);
PDEBUG(D_ERR, "wait_status_0 timeout");
gspca_dev->usb_err = -ETIME;
@@ -307,8 +311,6 @@
sd->color = COLOR_DEF;
sd->sharpness = SHARPNESS_DEF;
- gspca_dev->nbalt = 4; /* use alternate setting 3 */
-
return 0;
}
@@ -347,8 +349,12 @@
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
reg_wb(gspca_dev, 0x25, 0x0000, 0x0004, mode);
reg_r(gspca_dev, 0x25, 0x0004, 1);
- reg_wb(gspca_dev, 0x27, 0x0000, 0x0000, 0x06);
+ reg_wb(gspca_dev, 0x27, 0x0000, 0x0000, 0x06); /* 420 */
reg_r(gspca_dev, 0x27, 0x0000, 1);
+
+/* not useful..
+ gspca_dev->alt = 4; * use alternate setting 3 */
+
return gspca_dev->usb_err;
}
@@ -361,8 +367,8 @@
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
- /* the JPEG quality seems to be 82% */
- jpeg_set_qual(sd->jpeg_hdr, 82);
+ /* the JPEG quality shall be 85% */
+ jpeg_set_qual(sd->jpeg_hdr, 85);
/* set the controls */
setbrightness(gspca_dev);
@@ -377,7 +383,7 @@
/* start the capture */
wait_status_0(gspca_dev);
- reg_w(gspca_dev, 0x31, 0x0000, 0x0004);
+ reg_w(gspca_dev, 0x31, 0x0000, 0x0004); /* start request */
wait_status_1(gspca_dev);
wait_status_0(gspca_dev);
msleep(200);
@@ -390,7 +396,7 @@
{
/* stop the capture */
wait_status_0(gspca_dev);
- reg_w(gspca_dev, 0x31, 0x0000, 0x0000);
+ reg_w(gspca_dev, 0x31, 0x0000, 0x0000); /* stop request */
wait_status_1(gspca_dev);
wait_status_0(gspca_dev);
}
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 3e76951..bb82c94 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -19,6 +19,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "spca500"
#include "gspca.h"
@@ -396,7 +398,7 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, NULL, 0, 500);
if (ret < 0)
- err("reg write: error %d", ret);
+ pr_err("reg write: error %d\n", ret);
return ret;
}
@@ -418,7 +420,7 @@
gspca_dev->usb_buf, length,
500); /* timeout */
if (ret < 0) {
- err("reg_r_12 err %d", ret);
+ pr_err("reg_r_12 err %d\n", ret);
return ret;
}
return (gspca_dev->usb_buf[1] << 8) + gspca_dev->usb_buf[0];
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index f7ef282..7aaac72 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -19,6 +19,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "spca501"
#include "gspca.h"
@@ -1852,7 +1854,7 @@
PDEBUG(D_USBO, "reg write: 0x%02x 0x%02x 0x%02x",
req, index, value);
if (ret < 0)
- err("reg write: error %d", ret);
+ pr_err("reg write: error %d\n", ret);
return ret;
}
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index e5bf865..16722dc 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -19,6 +19,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "spca505"
#include "gspca.h"
@@ -578,7 +580,7 @@
PDEBUG(D_USBO, "reg write: 0x%02x,0x%02x:0x%02x, %d",
req, index, value, ret);
if (ret < 0)
- err("reg write: error %d", ret);
+ pr_err("reg write: error %d\n", ret);
return ret;
}
@@ -685,8 +687,8 @@
return ret;
}
if (ret != 0x0101) {
- err("After vector read returns 0x%04x should be 0x0101",
- ret);
+ pr_err("After vector read returns 0x%04x should be 0x0101\n",
+ ret);
}
ret = reg_write(gspca_dev->dev, 0x06, 0x16, 0x0a);
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 9d0b460..a44fe3d 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "spca508"
#include "gspca.h"
@@ -1275,7 +1277,7 @@
PDEBUG(D_USBO, "reg write i:0x%04x = 0x%02x",
index, value);
if (ret < 0)
- err("reg write: error %d", ret);
+ pr_err("reg write: error %d\n", ret);
return ret;
}
@@ -1297,7 +1299,7 @@
PDEBUG(D_USBI, "reg read i:%04x --> %02x",
index, gspca_dev->usb_buf[0]);
if (ret < 0) {
- err("reg_read err %d", ret);
+ pr_err("reg_read err %d\n", ret);
return ret;
}
return gspca_dev->usb_buf[0];
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index e836e77..c82fd53 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "spca561"
#include <linux/input.h>
@@ -315,7 +317,7 @@
value, index, NULL, 0, 500);
PDEBUG(D_USBO, "reg write: 0x%02x:0x%02x", index, value);
if (ret < 0)
- err("reg write: error %d", ret);
+ pr_err("reg write: error %d\n", ret);
}
static void write_vector(struct gspca_dev *gspca_dev,
diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c
index 5ba96af..df805f7 100644
--- a/drivers/media/video/gspca/sq905.c
+++ b/drivers/media/video/gspca/sq905.c
@@ -33,6 +33,8 @@
* drivers.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "sq905"
#include <linux/workqueue.h>
@@ -123,8 +125,7 @@
SQ905_COMMAND, index, gspca_dev->usb_buf, 1,
SQ905_CMD_TIMEOUT);
if (ret < 0) {
- err("%s: usb_control_msg failed (%d)",
- __func__, ret);
+ pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
return ret;
}
@@ -135,8 +136,7 @@
SQ905_PING, 0, gspca_dev->usb_buf, 1,
SQ905_CMD_TIMEOUT);
if (ret < 0) {
- err("%s: usb_control_msg failed 2 (%d)",
- __func__, ret);
+ pr_err("%s: usb_control_msg failed 2 (%d)\n", __func__, ret);
return ret;
}
@@ -158,7 +158,7 @@
SQ905_READ_DONE, 0, gspca_dev->usb_buf, 1,
SQ905_CMD_TIMEOUT);
if (ret < 0) {
- err("%s: usb_control_msg failed (%d)", __func__, ret);
+ pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
return ret;
}
@@ -186,7 +186,7 @@
if (need_lock)
mutex_unlock(&gspca_dev->usb_lock);
if (ret < 0) {
- err("%s: usb_control_msg failed (%d)", __func__, ret);
+ pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
return ret;
}
ret = usb_bulk_msg(gspca_dev->dev,
@@ -195,8 +195,7 @@
/* successful, it returns 0, otherwise negative */
if (ret < 0 || act_len != size) {
- err("bulk read fail (%d) len %d/%d",
- ret, act_len, size);
+ pr_err("bulk read fail (%d) len %d/%d\n", ret, act_len, size);
return -EIO;
}
return 0;
@@ -226,7 +225,7 @@
buffer = kmalloc(SQ905_MAX_TRANSFER, GFP_KERNEL | GFP_DMA);
if (!buffer) {
- err("Couldn't allocate USB buffer");
+ pr_err("Couldn't allocate USB buffer\n");
goto quit_stream;
}
diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c
index 457563b..c2c0560 100644
--- a/drivers/media/video/gspca/sq905c.c
+++ b/drivers/media/video/gspca/sq905c.c
@@ -27,6 +27,8 @@
* and may contain code fragments from it.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "sq905c"
#include <linux/workqueue.h>
@@ -95,8 +97,7 @@
command, index, NULL, 0,
SQ905C_CMD_TIMEOUT);
if (ret < 0) {
- err("%s: usb_control_msg failed (%d)",
- __func__, ret);
+ pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
return ret;
}
@@ -115,8 +116,7 @@
command, index, gspca_dev->usb_buf, size,
SQ905C_CMD_TIMEOUT);
if (ret < 0) {
- err("%s: usb_control_msg failed (%d)",
- __func__, ret);
+ pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
return ret;
}
@@ -146,7 +146,7 @@
buffer = kmalloc(SQ905C_MAX_TRANSFER, GFP_KERNEL | GFP_DMA);
if (!buffer) {
- err("Couldn't allocate USB buffer");
+ pr_err("Couldn't allocate USB buffer\n");
goto quit_stream;
}
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 8215d5d..e4255b4 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "sq930x"
#include "gspca.h"
@@ -468,7 +470,7 @@
value, 0, gspca_dev->usb_buf, len,
500);
if (ret < 0) {
- err("reg_r %04x failed %d", value, ret);
+ pr_err("reg_r %04x failed %d\n", value, ret);
gspca_dev->usb_err = ret;
}
}
@@ -488,7 +490,7 @@
500);
msleep(30);
if (ret < 0) {
- err("reg_w %04x %04x failed %d", value, index, ret);
+ pr_err("reg_w %04x %04x failed %d\n", value, index, ret);
gspca_dev->usb_err = ret;
}
}
@@ -511,7 +513,7 @@
1000);
msleep(30);
if (ret < 0) {
- err("reg_wb %04x %04x failed %d", value, index, ret);
+ pr_err("reg_wb %04x %04x failed %d\n", value, index, ret);
gspca_dev->usb_err = ret;
}
}
@@ -556,7 +558,7 @@
gspca_dev->usb_buf, buf - gspca_dev->usb_buf,
500);
if (ret < 0) {
- err("i2c_write failed %d", ret);
+ pr_err("i2c_write failed %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -575,7 +577,7 @@
#ifdef GSPCA_DEBUG
if ((batchsize - 1) * 3 > USB_BUF_SZ) {
- err("Bug: usb_buf overflow");
+ pr_err("Bug: usb_buf overflow\n");
gspca_dev->usb_err = -ENOMEM;
return;
}
@@ -612,7 +614,7 @@
gspca_dev->usb_buf, buf - gspca_dev->usb_buf,
500);
if (ret < 0) {
- err("ucbus_write failed %d", ret);
+ pr_err("ucbus_write failed %d\n", ret);
gspca_dev->usb_err = ret;
return;
}
@@ -688,7 +690,7 @@
break;
}
if (i >= ARRAY_SIZE(probe_order)) {
- err("Unknown sensor");
+ pr_err("Unknown sensor\n");
gspca_dev->usb_err = -EINVAL;
return;
}
@@ -696,7 +698,8 @@
switch (sd->sensor) {
case SENSOR_OV7660:
case SENSOR_OV9630:
- err("Sensor %s not yet treated", sensor_tb[sd->sensor].name);
+ pr_err("Sensor %s not yet treated\n",
+ sensor_tb[sd->sensor].name);
gspca_dev->usb_err = -EINVAL;
break;
}
@@ -1091,7 +1094,7 @@
gspca_dev->cam.bulk_nurbs = 1;
ret = usb_submit_urb(gspca_dev->urb[0], GFP_ATOMIC);
if (ret < 0)
- err("sd_dq_callback() err %d", ret);
+ pr_err("sd_dq_callback() err %d\n", ret);
/* wait a little time, otherwise the webcam crashes */
msleep(100);
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index 7637477..42a7a28 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "stk014"
#include "gspca.h"
@@ -137,7 +139,7 @@
gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_r err %d", ret);
+ pr_err("reg_r err %d\n", ret);
gspca_dev->usb_err = ret;
return 0;
}
@@ -162,7 +164,7 @@
0,
500);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -192,7 +194,7 @@
&alen,
500); /* timeout in milliseconds */
if (ret < 0) {
- err("rcv_val err %d", ret);
+ pr_err("rcv_val err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -235,7 +237,7 @@
&alen,
500); /* timeout in milliseconds */
if (ret < 0) {
- err("snd_val err %d", ret);
+ pr_err("snd_val err %d\n", ret);
gspca_dev->usb_err = ret;
} else {
if (ads == 0x003f08) {
@@ -315,7 +317,7 @@
ret = reg_r(gspca_dev, 0x0740);
if (gspca_dev->usb_err >= 0) {
if (ret != 0xff) {
- err("init reg: 0x%02x", ret);
+ pr_err("init reg: 0x%02x\n", ret);
gspca_dev->usb_err = -EIO;
}
}
@@ -349,8 +351,8 @@
gspca_dev->iface,
gspca_dev->alt);
if (ret < 0) {
- err("set intf %d %d failed",
- gspca_dev->iface, gspca_dev->alt);
+ pr_err("set intf %d %d failed\n",
+ gspca_dev->iface, gspca_dev->alt);
gspca_dev->usb_err = ret;
goto out;
}
diff --git a/drivers/media/video/gspca/stv0680.c b/drivers/media/video/gspca/stv0680.c
index e2ef41c..4dcc7e3 100644
--- a/drivers/media/video/gspca/stv0680.c
+++ b/drivers/media/video/gspca/stv0680.c
@@ -27,6 +27,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "stv0680"
#include "gspca.h"
@@ -79,7 +81,7 @@
val, 0, gspca_dev->usb_buf, size, 500);
if ((ret < 0) && (req != 0x0a))
- err("usb_control_msg error %i, request = 0x%x, error = %i",
+ pr_err("usb_control_msg error %i, request = 0x%x, error = %i\n",
set, req, ret);
return ret;
@@ -236,7 +238,7 @@
if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0100, 0x12) != 0x12 ||
gspca_dev->usb_buf[8] != 0x53 || gspca_dev->usb_buf[9] != 0x05) {
- err("Could not get descriptor 0100.");
+ pr_err("Could not get descriptor 0100\n");
return stv0680_handle_error(gspca_dev, -EIO);
}
diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile
index 2f3c3a6..5b318fa 100644
--- a/drivers/media/video/gspca/stv06xx/Makefile
+++ b/drivers/media/video/gspca/stv06xx/Makefile
@@ -6,5 +6,5 @@
stv06xx_pb0100.o \
stv06xx_st6422.o
-EXTRA_CFLAGS += -Idrivers/media/video/gspca
+ccflags-y += -Idrivers/media/video/gspca
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index abf1658..b1fca7d 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -27,6 +27,8 @@
* P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/input.h>
#include "stv06xx_sensor.h"
@@ -189,7 +191,7 @@
0x04, 0x40, 0x1400, 0, buf, I2C_BUFFER_LENGTH,
STV06XX_URB_MSG_TIMEOUT);
if (err < 0) {
- err("I2C: Read error writing address: %d", err);
+ pr_err("I2C: Read error writing address: %d\n", err);
return err;
}
@@ -213,14 +215,14 @@
int i;
u8 data, buf;
- info("Dumping all stv06xx bridge registers");
+ pr_info("Dumping all stv06xx bridge registers\n");
for (i = 0x1400; i < 0x160f; i++) {
stv06xx_read_bridge(sd, i, &data);
- info("Read 0x%x from address 0x%x", data, i);
+ pr_info("Read 0x%x from address 0x%x\n", data, i);
}
- info("Testing stv06xx bridge registers for writability");
+ pr_info("Testing stv06xx bridge registers for writability\n");
for (i = 0x1400; i < 0x160f; i++) {
stv06xx_read_bridge(sd, i, &data);
buf = data;
@@ -228,12 +230,12 @@
stv06xx_write_bridge(sd, i, 0xff);
stv06xx_read_bridge(sd, i, &data);
if (data == 0xff)
- info("Register 0x%x is read/write", i);
+ pr_info("Register 0x%x is read/write\n", i);
else if (data != buf)
- info("Register 0x%x is read/write,"
- " but only partially", i);
+ pr_info("Register 0x%x is read/write, but only partially\n",
+ i);
else
- info("Register 0x%x is read-only", i);
+ pr_info("Register 0x%x is read-only\n", i);
stv06xx_write_bridge(sd, i, buf);
}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index e0f63c5..d270a59 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -37,6 +37,8 @@
#define STV_ISOC_ENDPOINT_ADDR 0x81
+#define STV_R 0x0509
+
#define STV_REG23 0x0423
/* Control registers of the STV0600 ASIC */
@@ -61,7 +63,9 @@
/* Refers to the CIF 352x288 and QCIF 176x144 */
/* 1: 288 lines, 2: 144 lines */
-#define STV_Y_CTRL 0x15c3
+#define STV_Y_CTRL 0x15c3
+
+#define STV_RESET 0x1620
/* 0xa: 352 columns, 0x6: 176 columns */
#define STV_X_CTRL 0x1680
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index b815685..a8698b7 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -28,6 +28,8 @@
* P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "stv06xx_hdcs.h"
static const struct ctrl hdcs1x00_ctrl[] = {
@@ -428,7 +430,7 @@
if (ret < 0 || sensor != 0x08)
return -ENODEV;
- info("HDCS-1000/1100 sensor detected");
+ pr_info("HDCS-1000/1100 sensor detected\n");
sd->gspca_dev.cam.cam_mode = hdcs1x00_mode;
sd->gspca_dev.cam.nmodes = ARRAY_SIZE(hdcs1x00_mode);
@@ -487,7 +489,7 @@
if (ret < 0 || sensor != 0x10)
return -ENODEV;
- info("HDCS-1020 sensor detected");
+ pr_info("HDCS-1020 sensor detected\n");
sd->gspca_dev.cam.cam_mode = hdcs1020_mode;
sd->gspca_dev.cam.nmodes = ARRAY_SIZE(hdcs1020_mode);
@@ -601,11 +603,11 @@
{
u16 reg, val;
- info("Dumping sensor registers:");
+ pr_info("Dumping sensor registers:\n");
for (reg = HDCS_IDENT; reg <= HDCS_ROWEXPH; reg++) {
stv06xx_read_sensor(sd, reg, &val);
- info("reg 0x%02x = 0x%02x", reg, val);
+ pr_info("reg 0x%02x = 0x%02x\n", reg, val);
}
return 0;
}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
index 75a5b9c..26f14fc 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
@@ -44,6 +44,8 @@
* PB_CFILLIN = R5 = 0x0E (14 dec) : Sets the frame rate
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "stv06xx_pb0100.h"
static const struct ctrl pb0100_ctrl[] = {
@@ -190,7 +192,7 @@
if (!sensor_settings)
return -ENOMEM;
- info("Photobit pb0100 sensor detected");
+ pr_info("Photobit pb0100 sensor detected\n");
sd->gspca_dev.cam.cam_mode = pb0100_mode;
sd->gspca_dev.cam.nmodes = ARRAY_SIZE(pb0100_mode);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
index 8a456de..9940e03 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -26,6 +26,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "stv06xx_st6422.h"
/* controls */
@@ -136,7 +138,7 @@
if (sd->bridge != BRIDGE_ST6422)
return -ENODEV;
- info("st6422 sensor detected");
+ pr_info("st6422 sensor detected\n");
sensor_settings = kmalloc(sizeof *sensor_settings, GFP_KERNEL);
if (!sensor_settings)
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c
index f839843..a5c69d9 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c
@@ -27,6 +27,8 @@
* P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "stv06xx_vv6410.h"
static struct v4l2_pix_format vv6410_mode[] = {
@@ -112,7 +114,7 @@
return -ENODEV;
if (data == 0x19) {
- info("vv6410 sensor detected");
+ pr_info("vv6410 sensor detected\n");
sensor_settings = kmalloc(ARRAY_SIZE(vv6410_ctrl) * sizeof(s32),
GFP_KERNEL);
@@ -138,18 +140,7 @@
s32 *sensor_settings = sd->sensor_priv;
for (i = 0; i < ARRAY_SIZE(stv_bridge_init); i++) {
- /* if NULL then len contains single value */
- if (stv_bridge_init[i].data == NULL) {
- err = stv06xx_write_bridge(sd,
- stv_bridge_init[i].start,
- stv_bridge_init[i].len);
- } else {
- int j;
- for (j = 0; j < stv_bridge_init[i].len; j++)
- err = stv06xx_write_bridge(sd,
- stv_bridge_init[i].start + j,
- stv_bridge_init[i].data[j]);
- }
+ stv06xx_write_bridge(sd, stv_bridge_init[i].addr, stv_bridge_init[i].data);
}
if (err < 0)
@@ -183,15 +174,6 @@
struct cam *cam = &sd->gspca_dev.cam;
u32 priv = cam->cam_mode[sd->gspca_dev.curr_mode].priv;
- if (priv & VV6410_CROP_TO_QVGA) {
- PDEBUG(D_CONF, "Cropping to QVGA");
- stv06xx_write_sensor(sd, VV6410_XENDH, 320 - 1);
- stv06xx_write_sensor(sd, VV6410_YENDH, 240 - 1);
- } else {
- stv06xx_write_sensor(sd, VV6410_XENDH, 360 - 1);
- stv06xx_write_sensor(sd, VV6410_YENDH, 294 - 1);
- }
-
if (priv & VV6410_SUBSAMPLE) {
PDEBUG(D_CONF, "Enabling subsampling");
stv06xx_write_bridge(sd, STV_Y_CTRL, 0x02);
@@ -201,8 +183,8 @@
} else {
stv06xx_write_bridge(sd, STV_Y_CTRL, 0x01);
stv06xx_write_bridge(sd, STV_X_CTRL, 0x0a);
+ stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x00);
- stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x20);
}
/* Turn on LED */
@@ -242,11 +224,11 @@
u8 i;
int err = 0;
- info("Dumping all vv6410 sensor registers");
+ pr_info("Dumping all vv6410 sensor registers\n");
for (i = 0; i < 0xff && !err; i++) {
u16 data;
err = stv06xx_read_sensor(sd, i, &data);
- info("Register 0x%x contained 0x%x", i, data);
+ pr_info("Register 0x%x contained 0x%x\n", i, data);
}
return (err < 0) ? err : 0;
}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
index 7fe3587..a25b887 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
@@ -211,49 +211,49 @@
/* If NULL, only single value to write, stored in len */
struct stv_init {
- const u8 *data;
- u16 start;
- u8 len;
-};
-
-static const u8 x1500[] = { /* 0x1500 - 0x150f */
- 0x0b, 0xa7, 0xb7, 0x00, 0x00
-};
-
-static const u8 x1536[] = { /* 0x1536 - 0x153b */
- 0x02, 0x00, 0x60, 0x01, 0x20, 0x01
+ u16 addr;
+ u8 data;
};
static const struct stv_init stv_bridge_init[] = {
/* This reg is written twice. Some kind of reset? */
- {NULL, 0x1620, 0x80},
- {NULL, 0x1620, 0x00},
- {NULL, 0x1443, 0x00},
- {NULL, 0x1423, 0x04},
- {x1500, 0x1500, ARRAY_SIZE(x1500)},
- {x1536, 0x1536, ARRAY_SIZE(x1536)},
+ {STV_RESET, 0x80},
+ {STV_RESET, 0x00},
+ {STV_SCAN_RATE, 0x00},
+ {STV_I2C_FLUSH, 0x04},
+ {STV_REG00, 0x0b},
+ {STV_REG01, 0xa7},
+ {STV_REG02, 0xb7},
+ {STV_REG03, 0x00},
+ {STV_REG04, 0x00},
+ {0x1536, 0x02},
+ {0x1537, 0x00},
+ {0x1538, 0x60},
+ {0x1539, 0x01},
+ {0x153a, 0x20},
+ {0x153b, 0x01},
};
static const u8 vv6410_sensor_init[][2] = {
/* Setup registers */
- {VV6410_SETUP0, VV6410_SOFT_RESET},
- {VV6410_SETUP0, VV6410_LOW_POWER_MODE},
+ {VV6410_SETUP0, VV6410_SOFT_RESET},
+ {VV6410_SETUP0, VV6410_LOW_POWER_MODE},
/* Use shuffled read-out mode */
- {VV6410_SETUP1, BIT(6)},
- /* All modes to 1 */
- {VV6410_FGMODES, BIT(6) | BIT(4) | BIT(2) | BIT(0)},
- {VV6410_PINMAPPING, 0x00},
+ {VV6410_SETUP1, BIT(6)},
+ /* All modes to 1, FST, Fast QCK, Free running QCK, Free running LST, FST will qualify visible pixels */
+ {VV6410_FGMODES, BIT(6) | BIT(4) | BIT(2) | BIT(0)},
+ {VV6410_PINMAPPING, 0x00},
/* Pre-clock generator divide off */
- {VV6410_DATAFORMAT, BIT(7) | BIT(0)},
+ {VV6410_DATAFORMAT, BIT(7) | BIT(0)},
- {VV6410_CLKDIV, VV6410_CLK_DIV_2},
+ {VV6410_CLKDIV, VV6410_CLK_DIV_2},
/* System registers */
/* Enable voltage doubler */
- {VV6410_AS0, BIT(6) | BIT(4) | BIT(3) | BIT(2) | BIT(1)},
- {VV6410_AT0, 0x00},
+ {VV6410_AS0, BIT(6) | BIT(4) | BIT(3) | BIT(2) | BIT(1)},
+ {VV6410_AT0, 0x00},
/* Power up audio, differential */
- {VV6410_AT1, BIT(4)|BIT(0)},
+ {VV6410_AT1, BIT(4) | BIT(0)},
};
#endif
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 6ec2329..c890977 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "sunplus"
#include "gspca.h"
@@ -325,7 +327,7 @@
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
- err("reg_r: buffer overflow");
+ pr_err("reg_r: buffer overflow\n");
return;
}
#endif
@@ -340,7 +342,7 @@
len ? gspca_dev->usb_buf : NULL, len,
500);
if (ret < 0) {
- err("reg_r err %d", ret);
+ pr_err("reg_r err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -365,7 +367,7 @@
gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_w_1 err %d", ret);
+ pr_err("reg_w_1 err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -385,7 +387,7 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, NULL, 0, 500);
if (ret < 0) {
- err("reg_w_riv err %d", ret);
+ pr_err("reg_w_riv err %d\n", ret);
gspca_dev->usb_err = ret;
return;
}
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index d1d733b..90f0877 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -26,6 +26,8 @@
* Costantino Leandro
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "t613"
#include <linux/slab.h>
@@ -572,7 +574,7 @@
tmpbuf = kmemdup(buffer, len, GFP_KERNEL);
if (!tmpbuf) {
- err("Out of memory");
+ pr_err("Out of memory\n");
return;
}
usb_control_msg(gspca_dev->dev,
@@ -598,7 +600,7 @@
} else {
p = tmpbuf = kmalloc(len * 2, GFP_KERNEL);
if (!tmpbuf) {
- err("Out of memory");
+ pr_err("Out of memory\n");
return;
}
}
@@ -652,7 +654,7 @@
}
byte = reg_r(gspca_dev, 0x0063);
if (byte != 0x17) {
- err("Bad sensor reset %02x", byte);
+ pr_err("Bad sensor reset %02x\n", byte);
/* continue? */
}
@@ -890,7 +892,7 @@
sd->sensor = SENSOR_OM6802;
break;
default:
- err("unknown sensor %04x", sensor_id);
+ pr_err("unknown sensor %04x\n", sensor_id);
return -EINVAL;
}
@@ -905,7 +907,7 @@
break; /* OK */
}
if (i < 0) {
- err("Bad sensor reset %02x", test_byte);
+ pr_err("Bad sensor reset %02x\n", test_byte);
return -EIO;
}
reg_w_buf(gspca_dev, n2, sizeof n2);
diff --git a/drivers/media/video/gspca/topro.c b/drivers/media/video/gspca/topro.c
new file mode 100644
index 0000000..29596c5
--- /dev/null
+++ b/drivers/media/video/gspca/topro.c
@@ -0,0 +1,4989 @@
+/*
+ * Topro TP6800/6810 webcam driver.
+ *
+ * Copyright (C) 2011 Jean-François Moine (http://moinejf.free.fr)
+ * Copyright (C) 2009 Anders Blomdell (anders.blomdell@control.lth.se)
+ * Copyright (C) 2008 Thomas Champagne (lafeuil@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "gspca.h"
+
+MODULE_DESCRIPTION("Topro TP6800/6810 gspca webcam driver");
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
+ "Anders Blomdell <anders.blomdell@control.lth.se>");
+MODULE_LICENSE("GPL");
+
+static int force_sensor = -1;
+
+/* JPEG header */
+static const u8 jpeg_head[] = {
+ 0xff, 0xd8, /* jpeg */
+
+/* quantization table quality 50% */
+ 0xff, 0xdb, 0x00, 0x84, /* DQT */
+0,
+#define JPEG_QT0_OFFSET 7
+ 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e,
+ 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28,
+ 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25,
+ 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33,
+ 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44,
+ 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57,
+ 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71,
+ 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63,
+1,
+#define JPEG_QT1_OFFSET 72
+ 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
+ 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+
+ /* Define Huffman table (thanks to Thomas Kaiser) */
+ 0xff, 0xc4, 0x01, 0x5e,
+ 0x00, 0x00, 0x02, 0x03,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02,
+ 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x10,
+ 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
+ 0x07, 0x05, 0x04, 0x06, 0x01, 0x00, 0x00, 0x57,
+ 0x01, 0x02, 0x03, 0x00, 0x11, 0x04, 0x12, 0x21,
+ 0x31, 0x13, 0x41, 0x51, 0x61, 0x05, 0x22, 0x32,
+ 0x14, 0x71, 0x81, 0x91, 0x15, 0x23, 0x42, 0x52,
+ 0x62, 0xa1, 0xb1, 0x06, 0x33, 0x72, 0xc1, 0xd1,
+ 0x24, 0x43, 0x53, 0x82, 0x16, 0x34, 0x92, 0xa2,
+ 0xe1, 0xf1, 0xf0, 0x07, 0x08, 0x17, 0x18, 0x25,
+ 0x26, 0x27, 0x28, 0x35, 0x36, 0x37, 0x38, 0x44,
+ 0x45, 0x46, 0x47, 0x48, 0x54, 0x55, 0x56, 0x57,
+ 0x58, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x73,
+ 0x74, 0x75, 0x76, 0x77, 0x78, 0x83, 0x84, 0x85,
+ 0x86, 0x87, 0x88, 0x93, 0x94, 0x95, 0x96, 0x97,
+ 0x98, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xb2,
+ 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, 0xb8, 0xc2, 0xc3,
+ 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xd2, 0xd3, 0xd4,
+ 0xd5, 0xd6, 0xd7, 0xd8, 0xe2, 0xe3, 0xe4, 0xe5,
+ 0xe6, 0xe7, 0xe8, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6,
+ 0xf7, 0xf8, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03, 0x04,
+ 0x05, 0x06, 0x07, 0x08, 0x09, 0x11, 0x00, 0x02,
+ 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, 0x07, 0x05,
+ 0x04, 0x06, 0x01, 0x00, 0x00, 0x57, 0x00, 0x01,
+ 0x11, 0x02, 0x21, 0x03, 0x12, 0x31, 0x41, 0x13,
+ 0x22, 0x51, 0x61, 0x04, 0x32, 0x71, 0x05, 0x14,
+ 0x23, 0x42, 0x33, 0x52, 0x81, 0x91, 0xa1, 0xb1,
+ 0xf0, 0x06, 0x15, 0xc1, 0xd1, 0xe1, 0x24, 0x43,
+ 0x62, 0xf1, 0x16, 0x25, 0x34, 0x53, 0x72, 0x82,
+ 0x92, 0x07, 0x08, 0x17, 0x18, 0x26, 0x27, 0x28,
+ 0x35, 0x36, 0x37, 0x38, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x63, 0x64,
+ 0x65, 0x66, 0x67, 0x68, 0x73, 0x74, 0x75, 0x76,
+ 0x77, 0x78, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
+ 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0xa2, 0xa3,
+ 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xb2, 0xb3, 0xb4,
+ 0xb5, 0xb6, 0xb7, 0xb8, 0xc2, 0xc3, 0xc4, 0xc5,
+ 0xc6, 0xc7, 0xc8, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6,
+ 0xd7, 0xd8, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7,
+ 0xe8, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+ 0xff, 0xc0, 0x00, 0x11, /* SOF0 (start of frame 0 */
+ 0x08, /* data precision */
+#define JPEG_HEIGHT_OFFSET 493
+ 0x01, 0xe0, /* height */
+ 0x02, 0x80, /* width */
+ 0x03, /* component number */
+ 0x01,
+ 0x21, /* samples Y = jpeg 422 */
+ 0x00, /* quant Y */
+ 0x02, 0x11, 0x01, /* samples CbCr - quant CbCr */
+ 0x03, 0x11, 0x01,
+
+ 0xff, 0xda, 0x00, 0x0c, /* SOS (start of scan) */
+ 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+#define JPEG_HDR_SZ 521
+};
+
+enum e_ctrl {
+ EXPOSURE,
+ QUALITY,
+ SHARPNESS,
+ RGAIN,
+ GAIN,
+ BGAIN,
+ GAMMA,
+ AUTOGAIN,
+ NCTRLS /* number of controls */
+};
+
+#define AUTOGAIN_DEF 1
+
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+
+ struct gspca_ctrl ctrls[NCTRLS];
+
+ u8 framerate;
+ u8 quality; /* webcam current JPEG quality (0..16) */
+ s8 ag_cnt; /* autogain / start counter for tp6810 */
+#define AG_CNT_START 13 /* check gain every N frames */
+
+ u8 bridge;
+ u8 sensor;
+
+ u8 jpeg_hdr[JPEG_HDR_SZ];
+};
+
+enum bridges {
+ BRIDGE_TP6800,
+ BRIDGE_TP6810,
+};
+
+enum sensors {
+ SENSOR_CX0342,
+ SENSOR_SOI763A, /* ~= ov7630 / ov7648 */
+ NSENSORS
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 4 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+ {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG}
+};
+
+/*
+ * JPEG quality
+ * index: webcam compression
+ * value: JPEG quality in %
+ */
+static const u8 jpeg_q[17] = {
+ 88, 77, 67, 57, 55, 55, 45, 45, 36, 36, 30, 30, 26, 26, 22, 22, 94
+};
+
+#define BULK_OUT_SIZE 0x20
+#if BULK_OUT_SIZE > USB_BUF_SZ
+#error "USB buffer too small"
+#endif
+
+static const u8 rates[] = {30, 20, 15, 10, 7, 5};
+static const struct framerates framerates[] = {
+ {
+ .rates = rates,
+ .nrates = ARRAY_SIZE(rates)
+ },
+ {
+ .rates = rates,
+ .nrates = ARRAY_SIZE(rates)
+ }
+};
+static const u8 rates_6810[] = {30, 15, 10, 7, 5};
+static const struct framerates framerates_6810[] = {
+ {
+ .rates = rates_6810,
+ .nrates = ARRAY_SIZE(rates_6810)
+ },
+ {
+ .rates = rates_6810,
+ .nrates = ARRAY_SIZE(rates_6810)
+ }
+};
+
+/*
+ * webcam quality in %
+ * the last value is the ultra fine quality
+ */
+
+/* TP6800 register offsets */
+#define TP6800_R10_SIF_TYPE 0x10
+#define TP6800_R11_SIF_CONTROL 0x11
+#define TP6800_R12_SIF_ADDR_S 0x12
+#define TP6800_R13_SIF_TX_DATA 0x13
+#define TP6800_R14_SIF_RX_DATA 0x14
+#define TP6800_R15_GPIO_PU 0x15
+#define TP6800_R16_GPIO_PD 0x16
+#define TP6800_R17_GPIO_IO 0x17
+#define TP6800_R18_GPIO_DATA 0x18
+#define TP6800_R19_SIF_ADDR_S2 0x19
+#define TP6800_R1A_SIF_TX_DATA2 0x1a
+#define TP6800_R1B_SIF_RX_DATA2 0x1b
+#define TP6800_R21_ENDP_1_CTL 0x21
+#define TP6800_R2F_TIMING_CFG 0x2f
+#define TP6800_R30_SENSOR_CFG 0x30
+#define TP6800_R31_PIXEL_START 0x31
+#define TP6800_R32_PIXEL_END_L 0x32
+#define TP6800_R33_PIXEL_END_H 0x33
+#define TP6800_R34_LINE_START 0x34
+#define TP6800_R35_LINE_END_L 0x35
+#define TP6800_R36_LINE_END_H 0x36
+#define TP6800_R37_FRONT_DARK_ST 0x37
+#define TP6800_R38_FRONT_DARK_END 0x38
+#define TP6800_R39_REAR_DARK_ST_L 0x39
+#define TP6800_R3A_REAR_DARK_ST_H 0x3a
+#define TP6800_R3B_REAR_DARK_END_L 0x3b
+#define TP6800_R3C_REAR_DARK_END_H 0x3c
+#define TP6800_R3D_HORIZ_DARK_LINE_L 0x3d
+#define TP6800_R3E_HORIZ_DARK_LINE_H 0x3e
+#define TP6800_R3F_FRAME_RATE 0x3f
+#define TP6800_R50 0x50
+#define TP6800_R51 0x51
+#define TP6800_R52 0x52
+#define TP6800_R53 0x53
+#define TP6800_R54_DARK_CFG 0x54
+#define TP6800_R55_GAMMA_R 0x55
+#define TP6800_R56_GAMMA_G 0x56
+#define TP6800_R57_GAMMA_B 0x57
+#define TP6800_R5C_EDGE_THRLD 0x5c
+#define TP6800_R5D_DEMOSAIC_CFG 0x5d
+#define TP6800_R78_FORMAT 0x78
+#define TP6800_R79_QUALITY 0x79
+#define TP6800_R7A_BLK_THRLD 0x7a
+
+/* CX0342 register offsets */
+
+#define CX0342_SENSOR_ID 0x00
+#define CX0342_VERSION_NO 0x01
+#define CX0342_ORG_X_L 0x02
+#define CX0342_ORG_X_H 0x03
+#define CX0342_ORG_Y_L 0x04
+#define CX0342_ORG_Y_H 0x05
+#define CX0342_STOP_X_L 0x06
+#define CX0342_STOP_X_H 0x07
+#define CX0342_STOP_Y_L 0x08
+#define CX0342_STOP_Y_H 0x09
+#define CX0342_FRAME_WIDTH_L 0x0a
+#define CX0342_FRAME_WIDTH_H 0x0b
+#define CX0342_FRAME_HEIGH_L 0x0c
+#define CX0342_FRAME_HEIGH_H 0x0d
+#define CX0342_EXPO_LINE_L 0x10
+#define CX0342_EXPO_LINE_H 0x11
+#define CX0342_EXPO_CLK_L 0x12
+#define CX0342_EXPO_CLK_H 0x13
+#define CX0342_RAW_GRGAIN_L 0x14
+#define CX0342_RAW_GRGAIN_H 0x15
+#define CX0342_RAW_GBGAIN_L 0x16
+#define CX0342_RAW_GBGAIN_H 0x17
+#define CX0342_RAW_RGAIN_L 0x18
+#define CX0342_RAW_RGAIN_H 0x19
+#define CX0342_RAW_BGAIN_L 0x1a
+#define CX0342_RAW_BGAIN_H 0x1b
+#define CX0342_GLOBAL_GAIN 0x1c
+#define CX0342_SYS_CTRL_0 0x20
+#define CX0342_SYS_CTRL_1 0x21
+#define CX0342_SYS_CTRL_2 0x22
+#define CX0342_BYPASS_MODE 0x23
+#define CX0342_SYS_CTRL_3 0x24
+#define CX0342_TIMING_EN 0x25
+#define CX0342_OUTPUT_CTRL 0x26
+#define CX0342_AUTO_ADC_CALIB 0x27
+#define CX0342_SYS_CTRL_4 0x28
+#define CX0342_ADCGN 0x30
+#define CX0342_SLPCR 0x31
+#define CX0342_SLPFN_LO 0x32
+#define CX0342_ADC_CTL 0x33
+#define CX0342_LVRST_BLBIAS 0x34
+#define CX0342_VTHSEL 0x35
+#define CX0342_RAMP_RIV 0x36
+#define CX0342_LDOSEL 0x37
+#define CX0342_CLOCK_GEN 0x40
+#define CX0342_SOFT_RESET 0x41
+#define CX0342_PLL 0x42
+#define CX0342_DR_ENH_PULSE_OFFSET_L 0x43
+#define CX0342_DR_ENH_PULSE_OFFSET_H 0x44
+#define CX0342_DR_ENH_PULSE_POS_L 0x45
+#define CX0342_DR_ENH_PULSE_POS_H 0x46
+#define CX0342_DR_ENH_PULSE_WIDTH 0x47
+#define CX0342_AS_CURRENT_CNT_L 0x48
+#define CX0342_AS_CURRENT_CNT_H 0x49
+#define CX0342_AS_PREVIOUS_CNT_L 0x4a
+#define CX0342_AS_PREVIOUS_CNT_H 0x4b
+#define CX0342_SPV_VALUE_L 0x4c
+#define CX0342_SPV_VALUE_H 0x4d
+#define CX0342_GPXLTHD_L 0x50
+#define CX0342_GPXLTHD_H 0x51
+#define CX0342_RBPXLTHD_L 0x52
+#define CX0342_RBPXLTHD_H 0x53
+#define CX0342_PLANETHD_L 0x54
+#define CX0342_PLANETHD_H 0x55
+#define CX0342_ROWDARK_TH 0x56
+#define CX0342_ROWDARK_TOL 0x57
+#define CX0342_RB_GAP_L 0x58
+#define CX0342_RB_GAP_H 0x59
+#define CX0342_G_GAP_L 0x5a
+#define CX0342_G_GAP_H 0x5b
+#define CX0342_AUTO_ROW_DARK 0x60
+#define CX0342_MANUAL_DARK_VALUE 0x61
+#define CX0342_GB_DARK_OFFSET 0x62
+#define CX0342_GR_DARK_OFFSET 0x63
+#define CX0342_RED_DARK_OFFSET 0x64
+#define CX0342_BLUE_DARK_OFFSET 0x65
+#define CX0342_DATA_SCALING_MULTI 0x66
+#define CX0342_AUTOD_Q_FRAME 0x67
+#define CX0342_AUTOD_ALLOW_VARI 0x68
+#define CX0342_AUTO_DARK_VALUE_L 0x69
+#define CX0342_AUTO_DARK_VALUE_H 0x6a
+#define CX0342_IO_CTRL_0 0x70
+#define CX0342_IO_CTRL_1 0x71
+#define CX0342_IO_CTRL_2 0x72
+#define CX0342_IDLE_CTRL 0x73
+#define CX0342_TEST_MODE 0x74
+#define CX0342_FRAME_FIX_DATA_TEST 0x75
+#define CX0342_FRAME_CNT_TEST 0x76
+#define CX0342_RST_OVERFLOW_L 0x80
+#define CX0342_RST_OVERFLOW_H 0x81
+#define CX0342_RST_UNDERFLOW_L 0x82
+#define CX0342_RST_UNDERFLOW_H 0x83
+#define CX0342_DATA_OVERFLOW_L 0x84
+#define CX0342_DATA_OVERFLOW_H 0x85
+#define CX0342_DATA_UNDERFLOW_L 0x86
+#define CX0342_DATA_UNDERFLOW_H 0x87
+#define CX0342_CHANNEL_0_0_L_irst 0x90
+#define CX0342_CHANNEL_0_0_H_irst 0x91
+#define CX0342_CHANNEL_0_1_L_irst 0x92
+#define CX0342_CHANNEL_0_1_H_irst 0x93
+#define CX0342_CHANNEL_0_2_L_irst 0x94
+#define CX0342_CHANNEL_0_2_H_irst 0x95
+#define CX0342_CHANNEL_0_3_L_irst 0x96
+#define CX0342_CHANNEL_0_3_H_irst 0x97
+#define CX0342_CHANNEL_0_4_L_irst 0x98
+#define CX0342_CHANNEL_0_4_H_irst 0x99
+#define CX0342_CHANNEL_0_5_L_irst 0x9a
+#define CX0342_CHANNEL_0_5_H_irst 0x9b
+#define CX0342_CHANNEL_0_6_L_irst 0x9c
+#define CX0342_CHANNEL_0_6_H_irst 0x9d
+#define CX0342_CHANNEL_0_7_L_irst 0x9e
+#define CX0342_CHANNEL_0_7_H_irst 0x9f
+#define CX0342_CHANNEL_1_0_L_itx 0xa0
+#define CX0342_CHANNEL_1_0_H_itx 0xa1
+#define CX0342_CHANNEL_1_1_L_itx 0xa2
+#define CX0342_CHANNEL_1_1_H_itx 0xa3
+#define CX0342_CHANNEL_1_2_L_itx 0xa4
+#define CX0342_CHANNEL_1_2_H_itx 0xa5
+#define CX0342_CHANNEL_1_3_L_itx 0xa6
+#define CX0342_CHANNEL_1_3_H_itx 0xa7
+#define CX0342_CHANNEL_1_4_L_itx 0xa8
+#define CX0342_CHANNEL_1_4_H_itx 0xa9
+#define CX0342_CHANNEL_1_5_L_itx 0xaa
+#define CX0342_CHANNEL_1_5_H_itx 0xab
+#define CX0342_CHANNEL_1_6_L_itx 0xac
+#define CX0342_CHANNEL_1_6_H_itx 0xad
+#define CX0342_CHANNEL_1_7_L_itx 0xae
+#define CX0342_CHANNEL_1_7_H_itx 0xaf
+#define CX0342_CHANNEL_2_0_L_iwl 0xb0
+#define CX0342_CHANNEL_2_0_H_iwl 0xb1
+#define CX0342_CHANNEL_2_1_L_iwl 0xb2
+#define CX0342_CHANNEL_2_1_H_iwl 0xb3
+#define CX0342_CHANNEL_2_2_L_iwl 0xb4
+#define CX0342_CHANNEL_2_2_H_iwl 0xb5
+#define CX0342_CHANNEL_2_3_L_iwl 0xb6
+#define CX0342_CHANNEL_2_3_H_iwl 0xb7
+#define CX0342_CHANNEL_2_4_L_iwl 0xb8
+#define CX0342_CHANNEL_2_4_H_iwl 0xb9
+#define CX0342_CHANNEL_2_5_L_iwl 0xba
+#define CX0342_CHANNEL_2_5_H_iwl 0xbb
+#define CX0342_CHANNEL_2_6_L_iwl 0xbc
+#define CX0342_CHANNEL_2_6_H_iwl 0xbd
+#define CX0342_CHANNEL_2_7_L_iwl 0xbe
+#define CX0342_CHANNEL_2_7_H_iwl 0xbf
+#define CX0342_CHANNEL_3_0_L_ensp 0xc0
+#define CX0342_CHANNEL_3_0_H_ensp 0xc1
+#define CX0342_CHANNEL_3_1_L_ensp 0xc2
+#define CX0342_CHANNEL_3_1_H_ensp 0xc3
+#define CX0342_CHANNEL_3_2_L_ensp 0xc4
+#define CX0342_CHANNEL_3_2_H_ensp 0xc5
+#define CX0342_CHANNEL_3_3_L_ensp 0xc6
+#define CX0342_CHANNEL_3_3_H_ensp 0xc7
+#define CX0342_CHANNEL_3_4_L_ensp 0xc8
+#define CX0342_CHANNEL_3_4_H_ensp 0xc9
+#define CX0342_CHANNEL_3_5_L_ensp 0xca
+#define CX0342_CHANNEL_3_5_H_ensp 0xcb
+#define CX0342_CHANNEL_3_6_L_ensp 0xcc
+#define CX0342_CHANNEL_3_6_H_ensp 0xcd
+#define CX0342_CHANNEL_3_7_L_ensp 0xce
+#define CX0342_CHANNEL_3_7_H_ensp 0xcf
+#define CX0342_CHANNEL_4_0_L_sela 0xd0
+#define CX0342_CHANNEL_4_0_H_sela 0xd1
+#define CX0342_CHANNEL_4_1_L_sela 0xd2
+#define CX0342_CHANNEL_4_1_H_sela 0xd3
+#define CX0342_CHANNEL_5_0_L_intla 0xe0
+#define CX0342_CHANNEL_5_0_H_intla 0xe1
+#define CX0342_CHANNEL_5_1_L_intla 0xe2
+#define CX0342_CHANNEL_5_1_H_intla 0xe3
+#define CX0342_CHANNEL_5_2_L_intla 0xe4
+#define CX0342_CHANNEL_5_2_H_intla 0xe5
+#define CX0342_CHANNEL_5_3_L_intla 0xe6
+#define CX0342_CHANNEL_5_3_H_intla 0xe7
+#define CX0342_CHANNEL_6_0_L_xa_sel_pos 0xf0
+#define CX0342_CHANNEL_6_0_H_xa_sel_pos 0xf1
+#define CX0342_CHANNEL_7_1_L_cds_pos 0xf2
+#define CX0342_CHANNEL_7_1_H_cds_pos 0xf3
+#define CX0342_SENSOR_HEIGHT_L 0xfb
+#define CX0342_SENSOR_HEIGHT_H 0xfc
+#define CX0342_SENSOR_WIDTH_L 0xfd
+#define CX0342_SENSOR_WIDTH_H 0xfe
+#define CX0342_VSYNC_HSYNC_READ 0xff
+
+struct cmd {
+ u8 reg;
+ u8 val;
+};
+
+static const u8 DQT[17][130] = {
+ /* Define quantization table (thanks to Thomas Kaiser) */
+ { /* Quality 0 */
+ 0x00,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x01,
+ 0x04, 0x04, 0x04, 0x06, 0x05, 0x06, 0x0b, 0x06,
+ 0x06, 0x0b, 0x18, 0x10, 0x0e, 0x10, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ },
+ { /* Quality 1 */
+ 0x00,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x09, 0x09, 0x09, 0x09, 0x09,
+ 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,
+ 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,
+ 0x01,
+ 0x08, 0x09, 0x09, 0x0c, 0x0a, 0x0c, 0x17, 0x0d,
+ 0x0d, 0x17, 0x31, 0x21, 0x1c, 0x21, 0x31, 0x31,
+ 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
+ 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
+ 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
+ 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
+ 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
+ 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
+ },
+ { /* Quality 2 */
+ 0x00,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x06, 0x06, 0x06, 0x04, 0x04, 0x04,
+ 0x04, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
+ 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
+ 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
+ 0x06, 0x06, 0x06, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+ 0x01,
+ 0x0c, 0x0d, 0x0d, 0x12, 0x0f, 0x12, 0x23, 0x13,
+ 0x13, 0x23, 0x4a, 0x31, 0x2a, 0x31, 0x4a, 0x4a,
+ 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a,
+ 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a,
+ 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a,
+ 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a,
+ 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a,
+ 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a, 0x4a,
+ },
+ { /* Quality 3 */
+ 0x00,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x08, 0x08, 0x08, 0x04, 0x04, 0x04,
+ 0x04, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x08, 0x08, 0x08, 0x13, 0x13, 0x13, 0x13, 0x13,
+ 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
+ 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
+ 0x01,
+ 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
+ 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ },
+ { /* Quality 4 */
+ 0x00,
+ 0x04, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
+ 0x05, 0x05, 0x0a, 0x0a, 0x0a, 0x05, 0x05, 0x05,
+ 0x05, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a, 0x0a, 0x0a, 0x17, 0x17, 0x17, 0x17, 0x17,
+ 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17,
+ 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17,
+ 0x01,
+ 0x11, 0x16, 0x16, 0x1e, 0x1a, 0x1e, 0x3a, 0x20,
+ 0x20, 0x3a, 0x7b, 0x52, 0x46, 0x52, 0x7b, 0x7b,
+ 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b,
+ 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b,
+ 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b,
+ 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b,
+ 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b,
+ 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b, 0x7b,
+ },
+ { /* Quality 5 */
+ 0x00,
+ 0x04, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
+ 0x06, 0x06, 0x0c, 0x0c, 0x0c, 0x06, 0x06, 0x06,
+ 0x06, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c,
+ 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c,
+ 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c,
+ 0x0c, 0x0c, 0x0c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c,
+ 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c,
+ 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c,
+ 0x01,
+ 0x11, 0x1b, 0x1b, 0x24, 0x1f, 0x24, 0x46, 0x27,
+ 0x27, 0x46, 0x94, 0x63, 0x54, 0x63, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+ },
+ { /* Quality 6 */
+ 0x00,
+ 0x05, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ 0x07, 0x07, 0x0e, 0x0e, 0x0e, 0x07, 0x07, 0x07,
+ 0x07, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x0e, 0x0e, 0x21, 0x21, 0x21, 0x21, 0x21,
+ 0x21, 0x21, 0x21, 0x21, 0x21, 0x21, 0x21, 0x21,
+ 0x21, 0x21, 0x21, 0x21, 0x21, 0x21, 0x21, 0x21,
+ 0x01,
+ 0x15, 0x1f, 0x1f, 0x2a, 0x24, 0x2a, 0x52, 0x2d,
+ 0x2d, 0x52, 0xad, 0x73, 0x62, 0x73, 0xad, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xad,
+ },
+ { /* Quality 7 */
+ 0x00,
+ 0x05, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x08, 0x08, 0x10, 0x10, 0x10, 0x08, 0x08, 0x08,
+ 0x08, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+ 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+ 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+ 0x10, 0x10, 0x10, 0x26, 0x26, 0x26, 0x26, 0x26,
+ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26,
+ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26,
+ 0x01,
+ 0x15, 0x24, 0x24, 0x30, 0x2a, 0x30, 0x5e, 0x34,
+ 0x34, 0x5e, 0xc6, 0x84, 0x70, 0x84, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ },
+ { /* Quality 8 */
+ 0x00,
+ 0x06, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a, 0x0a, 0x14, 0x14, 0x14, 0x0a, 0x0a, 0x0a,
+ 0x0a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0x14, 0x2f, 0x2f, 0x2f, 0x2f, 0x2f,
+ 0x2f, 0x2f, 0x2f, 0x2f, 0x2f, 0x2f, 0x2f, 0x2f,
+ 0x2f, 0x2f, 0x2f, 0x2f, 0x2f, 0x2f, 0x2f, 0x2f,
+ 0x01,
+ 0x19, 0x2d, 0x2d, 0x3c, 0x34, 0x3c, 0x75, 0x41,
+ 0x41, 0x75, 0xf7, 0xa5, 0x8c, 0xa5, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ },
+ { /* Quality 9 */
+ 0x00,
+ 0x06, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c,
+ 0x0c, 0x0c, 0x18, 0x18, 0x18, 0x0c, 0x0c, 0x0c,
+ 0x0c, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x39, 0x39, 0x39, 0x39, 0x39,
+ 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
+ 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
+ 0x01,
+ 0x19, 0x36, 0x36, 0x48, 0x3f, 0x48, 0x8d, 0x4e,
+ 0x4e, 0x8d, 0xff, 0xc6, 0xa8, 0xc6, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ },
+ { /* Quality 10 */
+ 0x00,
+ 0x07, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x0e, 0x1c, 0x1c, 0x1c, 0x0e, 0x0e, 0x0e,
+ 0x0e, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c,
+ 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c,
+ 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c,
+ 0x1c, 0x1c, 0x1c, 0x42, 0x42, 0x42, 0x42, 0x42,
+ 0x42, 0x42, 0x42, 0x42, 0x42, 0x42, 0x42, 0x42,
+ 0x42, 0x42, 0x42, 0x42, 0x42, 0x42, 0x42, 0x42,
+ 0x01,
+ 0x1d, 0x3f, 0x3f, 0x54, 0x49, 0x54, 0xa4, 0x5b,
+ 0x5b, 0xa4, 0xff, 0xe7, 0xc4, 0xe7, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ },
+ { /* Quality 11 */
+ 0x00,
+ 0x07, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+ 0x10, 0x10, 0x20, 0x20, 0x20, 0x10, 0x10, 0x10,
+ 0x10, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c,
+ 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c,
+ 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c,
+ 0x01,
+ 0x1d, 0x48, 0x48, 0x60, 0x54, 0x60, 0xbc, 0x68,
+ 0x68, 0xbc, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ },
+ { /* Quality 12 */
+ 0x00,
+ 0x08, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0x28, 0x28, 0x28, 0x14, 0x14, 0x14,
+ 0x14, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+ 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+ 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+ 0x28, 0x28, 0x28, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f,
+ 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f,
+ 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f,
+ 0x01,
+ 0x22, 0x5a, 0x5a, 0x78, 0x69, 0x78, 0xeb, 0x82,
+ 0x82, 0xeb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ },
+ { /* Quality 13 */
+ 0x00,
+ 0x08, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x30, 0x30, 0x30, 0x18, 0x18, 0x18,
+ 0x18, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
+ 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
+ 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
+ 0x30, 0x30, 0x30, 0x72, 0x72, 0x72, 0x72, 0x72,
+ 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+ 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+ 0x01,
+ 0x22, 0x6c, 0x6c, 0x90, 0x7e, 0x90, 0xff, 0x9c,
+ 0x9c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ },
+ { /* Quality 14 */
+ 0x00,
+ 0x0a, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c, 0x1c,
+ 0x1c, 0x1c, 0x38, 0x38, 0x38, 0x1c, 0x1c, 0x1c,
+ 0x1c, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38,
+ 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38,
+ 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38,
+ 0x38, 0x38, 0x38, 0x85, 0x85, 0x85, 0x85, 0x85,
+ 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+ 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+ 0x01,
+ 0x2a, 0x7e, 0x7e, 0xa8, 0x93, 0xa8, 0xff, 0xb6,
+ 0xb6, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ },
+ { /* Quality 15 */
+ 0x00,
+ 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x40, 0x40, 0x40, 0x20, 0x20, 0x20,
+ 0x20, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
+ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
+ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
+ 0x40, 0x40, 0x40, 0x98, 0x98, 0x98, 0x98, 0x98,
+ 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+ 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+ 0x01,
+ 0x2a, 0x90, 0x90, 0xc0, 0xa8, 0xc0, 0xff, 0xd0,
+ 0xd0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ },
+ { /* Quality 16-31 */
+ 0x00,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x01,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ }
+};
+
+static const struct cmd tp6810_cx_init_common[] = {
+ {0x1c, 0x00},
+ {TP6800_R10_SIF_TYPE, 0x00},
+ {0x4e, 0x00},
+ {0x4f, 0x00},
+ {TP6800_R50, 0xff},
+ {TP6800_R51, 0x03},
+ {0x00, 0x07},
+ {TP6800_R79_QUALITY, 0x03},
+ {TP6800_R2F_TIMING_CFG, 0x37},
+ {TP6800_R30_SENSOR_CFG, 0x10},
+ {TP6800_R21_ENDP_1_CTL, 0x00},
+ {TP6800_R52, 0x40},
+ {TP6800_R53, 0x40},
+ {TP6800_R54_DARK_CFG, 0x40},
+ {TP6800_R30_SENSOR_CFG, 0x18},
+ {0x4b, 0x00},
+ {TP6800_R3F_FRAME_RATE, 0x83},
+ {TP6800_R79_QUALITY, 0x05},
+ {TP6800_R21_ENDP_1_CTL, 0x00},
+ {0x7c, 0x04},
+ {0x25, 0x14},
+ {0x26, 0x0f},
+ {0x7b, 0x10},
+};
+
+static const struct cmd tp6810_ov_init_common[] = {
+ {0x1c, 0x00},
+ {TP6800_R10_SIF_TYPE, 0x00},
+ {0x4e, 0x00},
+ {0x4f, 0x00},
+ {TP6800_R50, 0xff},
+ {TP6800_R51, 0x03},
+ {0x00, 0x07},
+ {TP6800_R52, 0x40},
+ {TP6800_R53, 0x40},
+ {TP6800_R54_DARK_CFG, 0x40},
+ {TP6800_R79_QUALITY, 0x03},
+ {TP6800_R2F_TIMING_CFG, 0x17},
+ {TP6800_R30_SENSOR_CFG, 0x18},
+ {TP6800_R21_ENDP_1_CTL, 0x00},
+ {TP6800_R3F_FRAME_RATE, 0x86},
+ {0x25, 0x18},
+ {0x26, 0x0f},
+ {0x7b, 0x90},
+};
+
+static const struct cmd tp6810_bridge_start[] = {
+ {0x59, 0x88},
+ {0x5a, 0x0f},
+ {0x5b, 0x4e},
+ {TP6800_R5C_EDGE_THRLD, 0x63},
+ {TP6800_R5D_DEMOSAIC_CFG, 0x00},
+ {0x03, 0x7f},
+ {0x04, 0x80},
+ {0x06, 0x00},
+ {0x00, 0x00},
+};
+
+static const struct cmd tp6810_late_start[] = {
+ {0x7d, 0x01},
+ {0xb0, 0x04},
+ {0xb1, 0x04},
+ {0xb2, 0x04},
+ {0xb3, 0x04},
+ {0xb4, 0x04},
+ {0xb5, 0x04},
+ {0xb6, 0x08},
+ {0xb7, 0x08},
+ {0xb8, 0x04},
+ {0xb9, 0x04},
+ {0xba, 0x04},
+ {0xbb, 0x04},
+ {0xbc, 0x04},
+ {0xbd, 0x08},
+ {0xbe, 0x08},
+ {0xbf, 0x08},
+ {0xc0, 0x04},
+ {0xc1, 0x04},
+ {0xc2, 0x08},
+ {0xc3, 0x08},
+ {0xc4, 0x08},
+ {0xc5, 0x08},
+ {0xc6, 0x08},
+ {0xc7, 0x13},
+ {0xc8, 0x04},
+ {0xc9, 0x08},
+ {0xca, 0x08},
+ {0xcb, 0x08},
+ {0xcc, 0x08},
+ {0xcd, 0x08},
+ {0xce, 0x13},
+ {0xcf, 0x13},
+ {0xd0, 0x08},
+ {0xd1, 0x08},
+ {0xd2, 0x08},
+ {0xd3, 0x08},
+ {0xd4, 0x08},
+ {0xd5, 0x13},
+ {0xd6, 0x13},
+ {0xd7, 0x13},
+ {0xd8, 0x08},
+ {0xd9, 0x08},
+ {0xda, 0x08},
+ {0xdb, 0x08},
+ {0xdc, 0x13},
+ {0xdd, 0x13},
+ {0xde, 0x13},
+ {0xdf, 0x13},
+ {0xe0, 0x08},
+ {0xe1, 0x08},
+ {0xe2, 0x08},
+ {0xe3, 0x13},
+ {0xe4, 0x13},
+ {0xe5, 0x13},
+ {0xe6, 0x13},
+ {0xe7, 0x13},
+ {0xe8, 0x08},
+ {0xe9, 0x08},
+ {0xea, 0x13},
+ {0xeb, 0x13},
+ {0xec, 0x13},
+ {0xed, 0x13},
+ {0xee, 0x13},
+ {0xef, 0x13},
+ {0x7d, 0x02},
+
+ /* later after isoc start */
+ {0x7d, 0x08},
+ {0x7d, 0x00},
+};
+
+static const struct cmd cx0342_timing_seq[] = {
+ {CX0342_CHANNEL_0_1_L_irst, 0x20},
+ {CX0342_CHANNEL_0_2_L_irst, 0x24},
+ {CX0342_CHANNEL_0_2_H_irst, 0x00},
+ {CX0342_CHANNEL_0_3_L_irst, 0x2f},
+ {CX0342_CHANNEL_0_3_H_irst, 0x00},
+ {CX0342_CHANNEL_1_0_L_itx, 0x02},
+ {CX0342_CHANNEL_1_0_H_itx, 0x00},
+ {CX0342_CHANNEL_1_1_L_itx, 0x20},
+ {CX0342_CHANNEL_1_1_H_itx, 0x00},
+ {CX0342_CHANNEL_1_2_L_itx, 0xe4},
+ {CX0342_CHANNEL_1_2_H_itx, 0x00},
+ {CX0342_CHANNEL_1_3_L_itx, 0xee},
+ {CX0342_CHANNEL_1_3_H_itx, 0x00},
+ {CX0342_CHANNEL_2_0_L_iwl, 0x30},
+ {CX0342_CHANNEL_2_0_H_iwl, 0x00},
+ {CX0342_CHANNEL_3_0_L_ensp, 0x34},
+ {CX0342_CHANNEL_3_1_L_ensp, 0xe2},
+ {CX0342_CHANNEL_3_1_H_ensp, 0x00},
+ {CX0342_CHANNEL_3_2_L_ensp, 0xf6},
+ {CX0342_CHANNEL_3_2_H_ensp, 0x00},
+ {CX0342_CHANNEL_3_3_L_ensp, 0xf4},
+ {CX0342_CHANNEL_3_3_H_ensp, 0x02},
+ {CX0342_CHANNEL_4_0_L_sela, 0x26},
+ {CX0342_CHANNEL_4_0_H_sela, 0x00},
+ {CX0342_CHANNEL_4_1_L_sela, 0xe2},
+ {CX0342_CHANNEL_4_1_H_sela, 0x00},
+ {CX0342_CHANNEL_5_0_L_intla, 0x26},
+ {CX0342_CHANNEL_5_1_L_intla, 0x29},
+ {CX0342_CHANNEL_5_2_L_intla, 0xf0},
+ {CX0342_CHANNEL_5_2_H_intla, 0x00},
+ {CX0342_CHANNEL_5_3_L_intla, 0xf3},
+ {CX0342_CHANNEL_5_3_H_intla, 0x00},
+ {CX0342_CHANNEL_6_0_L_xa_sel_pos, 0x24},
+ {CX0342_CHANNEL_7_1_L_cds_pos, 0x02},
+ {CX0342_TIMING_EN, 0x01},
+};
+
+/* define the JPEG header */
+static void jpeg_define(u8 *jpeg_hdr,
+ int height,
+ int width)
+{
+ memcpy(jpeg_hdr, jpeg_head, sizeof jpeg_head);
+ jpeg_hdr[JPEG_HEIGHT_OFFSET + 0] = height >> 8;
+ jpeg_hdr[JPEG_HEIGHT_OFFSET + 1] = height;
+ jpeg_hdr[JPEG_HEIGHT_OFFSET + 2] = width >> 8;
+ jpeg_hdr[JPEG_HEIGHT_OFFSET + 3] = width;
+}
+
+/* set the JPEG quality for sensor soi763a */
+static void jpeg_set_qual(u8 *jpeg_hdr,
+ int quality)
+{
+ int i, sc;
+
+ if (quality < 50)
+ sc = 5000 / quality;
+ else
+ sc = 200 - quality * 2;
+ for (i = 0; i < 64; i++) {
+ jpeg_hdr[JPEG_QT0_OFFSET + i] =
+ (jpeg_head[JPEG_QT0_OFFSET + i] * sc + 50) / 100;
+ jpeg_hdr[JPEG_QT1_OFFSET + i] =
+ (jpeg_head[JPEG_QT1_OFFSET + i] * sc + 50) / 100;
+ }
+}
+
+static void reg_w(struct gspca_dev *gspca_dev, u8 index, u8 value)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x0e,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, index, NULL, 0, 500);
+ if (ret < 0) {
+ pr_err("reg_w err %d\n", ret);
+ gspca_dev->usb_err = ret;
+ }
+}
+
+/* the returned value is in gspca_dev->usb_buf */
+static void reg_r(struct gspca_dev *gspca_dev, u8 index)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int ret;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ 0x0d,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, gspca_dev->usb_buf, 1, 500);
+ if (ret < 0) {
+ pr_err("reg_r err %d\n", ret);
+ gspca_dev->usb_err = ret;
+ }
+}
+
+static void reg_w_buf(struct gspca_dev *gspca_dev,
+ const struct cmd *p, int l)
+{
+ do {
+ reg_w(gspca_dev, p->reg, p->val);
+ p++;
+ } while (--l > 0);
+}
+
+static int i2c_w(struct gspca_dev *gspca_dev, u8 index, u8 value)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ reg_w(gspca_dev, TP6800_R11_SIF_CONTROL, 0x00);
+ reg_w(gspca_dev, TP6800_R19_SIF_ADDR_S2, index);
+ reg_w(gspca_dev, TP6800_R13_SIF_TX_DATA, value);
+ reg_w(gspca_dev, TP6800_R11_SIF_CONTROL, 0x01);
+ if (sd->bridge == BRIDGE_TP6800)
+ return 0;
+ msleep(5);
+ reg_r(gspca_dev, TP6800_R11_SIF_CONTROL);
+ if (gspca_dev->usb_buf[0] == 0)
+ return 0;
+ reg_w(gspca_dev, TP6800_R11_SIF_CONTROL, 0x00);
+ return -1; /* error */
+}
+
+static void i2c_w_buf(struct gspca_dev *gspca_dev,
+ const struct cmd *p, int l)
+{
+ do {
+ i2c_w(gspca_dev, p->reg, p->val);
+ p++;
+ } while (--l > 0);
+}
+
+static int i2c_r(struct gspca_dev *gspca_dev, u8 index, int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int v;
+
+ reg_w(gspca_dev, TP6800_R19_SIF_ADDR_S2, index);
+ reg_w(gspca_dev, TP6800_R11_SIF_CONTROL, 0x02);
+ msleep(5);
+ reg_r(gspca_dev, TP6800_R14_SIF_RX_DATA);
+ v = gspca_dev->usb_buf[0];
+ if (sd->bridge == BRIDGE_TP6800)
+ return v;
+ if (len > 1) {
+ reg_r(gspca_dev, TP6800_R1B_SIF_RX_DATA2);
+ v |= (gspca_dev->usb_buf[0] << 8);
+ }
+ reg_r(gspca_dev, TP6800_R11_SIF_CONTROL);
+ if (gspca_dev->usb_buf[0] == 0)
+ return v;
+ reg_w(gspca_dev, TP6800_R11_SIF_CONTROL, 0x00);
+ return -1;
+}
+
+static void bulk_w(struct gspca_dev *gspca_dev,
+ u8 tag,
+ const u8 *data,
+ int length)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int count, actual_count, ret;
+
+ if (gspca_dev->usb_err < 0)
+ return;
+ for (;;) {
+ count = length > BULK_OUT_SIZE - 1
+ ? BULK_OUT_SIZE - 1 : length;
+ gspca_dev->usb_buf[0] = tag;
+ memcpy(&gspca_dev->usb_buf[1], data, count);
+ ret = usb_bulk_msg(dev,
+ usb_sndbulkpipe(dev, 3),
+ gspca_dev->usb_buf, count + 1,
+ &actual_count, 500);
+ if (ret < 0) {
+ pr_err("bulk write error %d tag=%02x\n",
+ ret, tag);
+ gspca_dev->usb_err = ret;
+ return;
+ }
+ length -= count;
+ if (length <= 0)
+ break;
+ data += count;
+ }
+}
+
+static int probe_6810(struct gspca_dev *gspca_dev)
+{
+ u8 gpio;
+ int ret;
+
+ reg_r(gspca_dev, TP6800_R18_GPIO_DATA);
+ gpio = gspca_dev->usb_buf[0];
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R10_SIF_TYPE, 0x04); /* i2c 16 bits */
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x21); /* ov??? */
+ reg_w(gspca_dev, TP6800_R1A_SIF_TX_DATA2, 0x00);
+ if (i2c_w(gspca_dev, 0x00, 0x00) >= 0)
+ return SENSOR_SOI763A;
+
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R10_SIF_TYPE, 0x00); /* i2c 8 bits */
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x7f); /* (unknown i2c) */
+ if (i2c_w(gspca_dev, 0x00, 0x00) >= 0)
+ return -2;
+
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R10_SIF_TYPE, 0x00); /* i2c 8 bits */
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x11); /* tas??? / hv??? */
+ ret = i2c_r(gspca_dev, 0x00, 1);
+ if (ret > 0)
+ return -3;
+
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x6e); /* po??? */
+ ret = i2c_r(gspca_dev, 0x00, 1);
+ if (ret > 0)
+ return -4;
+
+ ret = i2c_r(gspca_dev, 0x01, 1);
+ if (ret > 0)
+ return -5;
+
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R10_SIF_TYPE, 0x04); /* i2c 16 bits */
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x5d); /* mi/mt??? */
+ ret = i2c_r(gspca_dev, 0x00, 2);
+ if (ret > 0)
+ return -6;
+
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x5c); /* mi/mt??? */
+ ret = i2c_r(gspca_dev, 0x36, 2);
+ if (ret > 0)
+ return -7;
+
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x61); /* (unknown i2c) */
+ reg_w(gspca_dev, TP6800_R1A_SIF_TX_DATA2, 0x10);
+ if (i2c_w(gspca_dev, 0xff, 0x00) >= 0)
+ return -8;
+
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio);
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, gpio | 0x20);
+ reg_w(gspca_dev, TP6800_R10_SIF_TYPE, 0x00); /* i2c 8 bits */
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x20); /* cx0342 */
+ ret = i2c_r(gspca_dev, 0x00, 1);
+ if (ret > 0)
+ return SENSOR_CX0342;
+ return -9;
+}
+
+static void cx0342_6810_init(struct gspca_dev *gspca_dev)
+{
+ static const struct cmd reg_init_1[] = {
+ {TP6800_R2F_TIMING_CFG, 0x2f},
+ {0x25, 0x02},
+ {TP6800_R21_ENDP_1_CTL, 0x00},
+ {TP6800_R3F_FRAME_RATE, 0x80},
+ {TP6800_R2F_TIMING_CFG, 0x2f},
+ {TP6800_R18_GPIO_DATA, 0xe1},
+ {TP6800_R18_GPIO_DATA, 0xc1},
+ {TP6800_R18_GPIO_DATA, 0xe1},
+ {TP6800_R11_SIF_CONTROL, 0x00},
+ };
+ static const struct cmd reg_init_2[] = {
+ {TP6800_R78_FORMAT, 0x48},
+ {TP6800_R11_SIF_CONTROL, 0x00},
+ };
+ static const struct cmd sensor_init[] = {
+ {CX0342_OUTPUT_CTRL, 0x07},
+ {CX0342_BYPASS_MODE, 0x58},
+ {CX0342_GPXLTHD_L, 0x28},
+ {CX0342_RBPXLTHD_L, 0x28},
+ {CX0342_PLANETHD_L, 0x50},
+ {CX0342_PLANETHD_H, 0x03},
+ {CX0342_RB_GAP_L, 0xff},
+ {CX0342_RB_GAP_H, 0x07},
+ {CX0342_G_GAP_L, 0xff},
+ {CX0342_G_GAP_H, 0x07},
+ {CX0342_RST_OVERFLOW_L, 0x5c},
+ {CX0342_RST_OVERFLOW_H, 0x01},
+ {CX0342_DATA_OVERFLOW_L, 0xfc},
+ {CX0342_DATA_OVERFLOW_H, 0x03},
+ {CX0342_DATA_UNDERFLOW_L, 0x00},
+ {CX0342_DATA_UNDERFLOW_H, 0x00},
+ {CX0342_SYS_CTRL_0, 0x40},
+ {CX0342_GLOBAL_GAIN, 0x01},
+ {CX0342_CLOCK_GEN, 0x00},
+ {CX0342_SYS_CTRL_0, 0x02},
+ {CX0342_IDLE_CTRL, 0x05},
+ {CX0342_ADCGN, 0x00},
+ {CX0342_ADC_CTL, 0x00},
+ {CX0342_LVRST_BLBIAS, 0x01},
+ {CX0342_VTHSEL, 0x0b},
+ {CX0342_RAMP_RIV, 0x0b},
+ {CX0342_LDOSEL, 0x07},
+ {CX0342_SPV_VALUE_L, 0x40},
+ {CX0342_SPV_VALUE_H, 0x02},
+
+ {CX0342_AUTO_ADC_CALIB, 0x81},
+ {CX0342_TIMING_EN, 0x01},
+ };
+
+ reg_w_buf(gspca_dev, reg_init_1, ARRAY_SIZE(reg_init_1));
+ reg_w_buf(gspca_dev, tp6810_cx_init_common,
+ ARRAY_SIZE(tp6810_cx_init_common));
+ reg_w_buf(gspca_dev, reg_init_2, ARRAY_SIZE(reg_init_2));
+
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x20); /* cx0342 I2C addr */
+ i2c_w_buf(gspca_dev, sensor_init, ARRAY_SIZE(sensor_init));
+ i2c_w_buf(gspca_dev, cx0342_timing_seq, ARRAY_SIZE(cx0342_timing_seq));
+}
+
+static void soi763a_6810_init(struct gspca_dev *gspca_dev)
+{
+ static const struct cmd reg_init_1[] = {
+ {TP6800_R2F_TIMING_CFG, 0x2f},
+ {TP6800_R18_GPIO_DATA, 0xe1},
+ {0x25, 0x02},
+ {TP6800_R21_ENDP_1_CTL, 0x00},
+ {TP6800_R3F_FRAME_RATE, 0x80},
+ {TP6800_R2F_TIMING_CFG, 0x2f},
+ {TP6800_R18_GPIO_DATA, 0xc1},
+ };
+ static const struct cmd reg_init_2[] = {
+ {TP6800_R78_FORMAT, 0x54},
+ };
+ static const struct cmd sensor_init[] = {
+ {0x00, 0x00},
+ {0x01, 0x80},
+ {0x02, 0x80},
+ {0x03, 0x90},
+ {0x04, 0x20},
+ {0x05, 0x20},
+ {0x06, 0x80},
+ {0x07, 0x00},
+ {0x08, 0xff},
+ {0x09, 0xff},
+ {0x0a, 0x76}, /* 7630 = soi673a */
+ {0x0b, 0x30},
+ {0x0c, 0x20},
+ {0x0d, 0x20},
+ {0x0e, 0xff},
+ {0x0f, 0xff},
+ {0x10, 0x41},
+ {0x15, 0x14},
+ {0x11, 0x40},
+ {0x12, 0x48},
+ {0x13, 0x80},
+ {0x14, 0x80},
+ {0x16, 0x03},
+ {0x28, 0xb0},
+ {0x71, 0x20},
+ {0x75, 0x8e},
+ {0x17, 0x1b},
+ {0x18, 0xbd},
+ {0x19, 0x05},
+ {0x1a, 0xf6},
+ {0x1b, 0x04},
+ {0x1c, 0x7f}, /* omnivision */
+ {0x1d, 0xa2},
+ {0x1e, 0x00},
+ {0x1f, 0x00},
+ {0x20, 0x45},
+ {0x21, 0x80},
+ {0x22, 0x80},
+ {0x23, 0xee},
+ {0x24, 0x50},
+ {0x25, 0x7a},
+ {0x26, 0xa0},
+ {0x27, 0x9a},
+ {0x29, 0x30},
+ {0x2a, 0x80},
+ {0x2b, 0x00},
+ {0x2c, 0xac},
+ {0x2d, 0x05},
+ {0x2e, 0x80},
+ {0x2f, 0x3c},
+ {0x30, 0x22},
+ {0x31, 0x00},
+ {0x32, 0x86},
+ {0x33, 0x08},
+ {0x34, 0xff},
+ {0x35, 0xff},
+ {0x36, 0xff},
+ {0x37, 0xff},
+ {0x38, 0xff},
+ {0x39, 0xff},
+ {0x3a, 0xfe},
+ {0x3b, 0xfe},
+ {0x3c, 0xfe},
+ {0x3d, 0xfe},
+ {0x3e, 0xfe},
+ {0x3f, 0x71},
+ {0x40, 0xff},
+ {0x41, 0xff},
+ {0x42, 0xff},
+ {0x43, 0xff},
+ {0x44, 0xff},
+ {0x45, 0xff},
+ {0x46, 0xff},
+ {0x47, 0xff},
+ {0x48, 0xff},
+ {0x49, 0xff},
+ {0x4a, 0xfe},
+ {0x4b, 0xff},
+ {0x4c, 0x00},
+ {0x4d, 0x00},
+ {0x4e, 0xff},
+ {0x4f, 0xff},
+ {0x50, 0xff},
+ {0x51, 0xff},
+ {0x52, 0xff},
+ {0x53, 0xff},
+ {0x54, 0xff},
+ {0x55, 0xff},
+ {0x56, 0xff},
+ {0x57, 0xff},
+ {0x58, 0xff},
+ {0x59, 0xff},
+ {0x5a, 0xff},
+ {0x5b, 0xfe},
+ {0x5c, 0xff},
+ {0x5d, 0x8f},
+ {0x5e, 0xff},
+ {0x5f, 0x8f},
+ {0x60, 0xa2},
+ {0x61, 0x4a},
+ {0x62, 0xf3},
+ {0x63, 0x75},
+ {0x64, 0xf0},
+ {0x65, 0x00},
+ {0x66, 0x55},
+ {0x67, 0x92},
+ {0x68, 0xa0},
+ {0x69, 0x4a},
+ {0x6a, 0x22},
+ {0x6b, 0x00},
+ {0x6c, 0x33},
+ {0x6d, 0x44},
+ {0x6e, 0x22},
+ {0x6f, 0x84},
+ {0x70, 0x0b},
+ {0x72, 0x10},
+ {0x73, 0x50},
+ {0x74, 0x21},
+ {0x76, 0x00},
+ {0x77, 0xa5},
+ {0x78, 0x80},
+ {0x79, 0x80},
+ {0x7a, 0x80},
+ {0x7b, 0xe2},
+ {0x7c, 0x00},
+ {0x7d, 0xf7},
+ {0x7e, 0x00},
+ {0x7f, 0x00},
+ };
+
+ reg_w_buf(gspca_dev, reg_init_1, ARRAY_SIZE(reg_init_1));
+ reg_w_buf(gspca_dev, tp6810_ov_init_common,
+ ARRAY_SIZE(tp6810_ov_init_common));
+ reg_w_buf(gspca_dev, reg_init_2, ARRAY_SIZE(reg_init_2));
+
+ i2c_w(gspca_dev, 0x12, 0x80); /* sensor reset */
+ msleep(10);
+ i2c_w_buf(gspca_dev, sensor_init, ARRAY_SIZE(sensor_init));
+}
+
+/* set the gain and exposure */
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_CX0342) {
+ int expo;
+
+ expo = (sd->ctrls[EXPOSURE].val << 2) - 1;
+ i2c_w(gspca_dev, CX0342_EXPO_LINE_L, expo);
+ i2c_w(gspca_dev, CX0342_EXPO_LINE_H, expo >> 8);
+ if (sd->bridge == BRIDGE_TP6800)
+ i2c_w(gspca_dev, CX0342_RAW_GBGAIN_H,
+ sd->ctrls[GAIN].val >> 8);
+ i2c_w(gspca_dev, CX0342_RAW_GBGAIN_L, sd->ctrls[GAIN].val);
+ if (sd->bridge == BRIDGE_TP6800)
+ i2c_w(gspca_dev, CX0342_RAW_GRGAIN_H,
+ sd->ctrls[GAIN].val >> 8);
+ i2c_w(gspca_dev, CX0342_RAW_GRGAIN_L, sd->ctrls[GAIN].val);
+ if (sd->bridge == BRIDGE_TP6800)
+ i2c_w(gspca_dev, CX0342_RAW_BGAIN_H,
+ sd->ctrls[BGAIN].val >> 8);
+ i2c_w(gspca_dev, CX0342_RAW_BGAIN_L, sd->ctrls[BGAIN].val);
+ if (sd->bridge == BRIDGE_TP6800)
+ i2c_w(gspca_dev, CX0342_RAW_RGAIN_H,
+ sd->ctrls[RGAIN].val >> 8);
+ i2c_w(gspca_dev, CX0342_RAW_RGAIN_L, sd->ctrls[RGAIN].val);
+ i2c_w(gspca_dev, CX0342_SYS_CTRL_0,
+ sd->bridge == BRIDGE_TP6800 ? 0x80 : 0x81);
+ return;
+ }
+
+ /* soi763a */
+ i2c_w(gspca_dev, 0x10, /* AEC_H (exposure time) */
+ sd->ctrls[EXPOSURE].val);
+/* i2c_w(gspca_dev, 0x76, 0x02); * AEC_L ([1:0] */
+ i2c_w(gspca_dev, 0x00, /* gain */
+ sd->ctrls[GAIN].val);
+}
+
+/* set the JPEG quantization tables */
+static void set_dqt(struct gspca_dev *gspca_dev, u8 q)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* update the jpeg quantization tables */
+ PDEBUG(D_STREAM, "q %d -> %d", sd->quality, q);
+ sd->quality = q;
+ if (q > 16)
+ q = 16;
+ if (sd->sensor == SENSOR_SOI763A)
+ jpeg_set_qual(sd->jpeg_hdr, jpeg_q[q]);
+ else
+ memcpy(&sd->jpeg_hdr[JPEG_QT0_OFFSET - 1],
+ DQT[q], sizeof DQT[0]);
+}
+
+/* set the JPEG compression quality factor */
+static void setquality(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u16 q;
+
+ q = sd->ctrls[QUALITY].val;
+ if (q != 16)
+ q = 15 - q;
+
+ reg_w(gspca_dev, TP6800_R7A_BLK_THRLD, 0x00);
+ reg_w(gspca_dev, TP6800_R79_QUALITY, 0x04);
+ reg_w(gspca_dev, TP6800_R79_QUALITY, q);
+
+ /* auto quality */
+ if (q == 15 && sd->bridge == BRIDGE_TP6810) {
+ msleep(4);
+ reg_w(gspca_dev, TP6800_R7A_BLK_THRLD, 0x19);
+ }
+}
+
+static const u8 color_null[18] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+static const u8 color_gain[NSENSORS][18] = {
+[SENSOR_CX0342] =
+ {0x4c, 0x00, 0xa9, 0x00, 0x31, 0x00, /* Y R/G/B (LE values) */
+ 0xb6, 0x03, 0x6c, 0x03, 0xe0, 0x00, /* U R/G/B */
+ 0xdf, 0x00, 0x46, 0x03, 0xdc, 0x03}, /* V R/G/B */
+[SENSOR_SOI763A] =
+ {0x4c, 0x00, 0x95, 0x00, 0x1d, 0x00, /* Y R/G/B (LE values) */
+ 0xb6, 0x03, 0x6c, 0x03, 0xd7, 0x00, /* U R/G/B */
+ 0xd5, 0x00, 0x46, 0x03, 0xdc, 0x03}, /* V R/G/B */
+};
+
+static void setgamma(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int gamma;
+#define NGAMMA 6
+ static const u8 gamma_tb[NGAMMA][3][1024] = {
+ { /* gamma 0 - from tp6800 + soi763a */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x02,
+ 0x02, 0x03, 0x05, 0x07, 0x07, 0x08, 0x09, 0x09,
+ 0x0a, 0x0c, 0x0c, 0x0d, 0x0e, 0x0e, 0x10, 0x11,
+ 0x11, 0x12, 0x14, 0x14, 0x15, 0x16, 0x16, 0x17,
+ 0x17, 0x18, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1e,
+ 0x1e, 0x1f, 0x1f, 0x20, 0x20, 0x22, 0x23, 0x23,
+ 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x28, 0x28,
+ 0x29, 0x29, 0x2b, 0x2c, 0x2c, 0x2d, 0x2d, 0x2f,
+ 0x2f, 0x30, 0x30, 0x31, 0x31, 0x33, 0x33, 0x34,
+ 0x34, 0x34, 0x35, 0x35, 0x37, 0x37, 0x38, 0x38,
+ 0x39, 0x39, 0x3a, 0x3a, 0x3b, 0x3b, 0x3b, 0x3c,
+ 0x3c, 0x3d, 0x3d, 0x3f, 0x3f, 0x40, 0x40, 0x40,
+ 0x42, 0x42, 0x43, 0x43, 0x44, 0x44, 0x44, 0x45,
+ 0x45, 0x47, 0x47, 0x47, 0x48, 0x48, 0x49, 0x49,
+ 0x4a, 0x4a, 0x4a, 0x4b, 0x4b, 0x4b, 0x4c, 0x4c,
+ 0x4d, 0x4d, 0x4d, 0x4f, 0x4f, 0x50, 0x50, 0x50,
+ 0x52, 0x52, 0x52, 0x53, 0x53, 0x54, 0x54, 0x54,
+ 0x55, 0x55, 0x55, 0x56, 0x56, 0x58, 0x58, 0x58,
+ 0x59, 0x59, 0x59, 0x5a, 0x5a, 0x5a, 0x5b, 0x5b,
+ 0x5b, 0x5c, 0x5c, 0x5c, 0x5e, 0x5e, 0x5e, 0x5f,
+ 0x5f, 0x5f, 0x60, 0x60, 0x60, 0x61, 0x61, 0x61,
+ 0x62, 0x62, 0x62, 0x63, 0x63, 0x63, 0x65, 0x65,
+ 0x65, 0x66, 0x66, 0x66, 0x67, 0x67, 0x67, 0x68,
+ 0x68, 0x68, 0x69, 0x69, 0x69, 0x69, 0x6a, 0x6a,
+ 0x6a, 0x6c, 0x6c, 0x6c, 0x6d, 0x6d, 0x6d, 0x6e,
+ 0x6e, 0x6e, 0x6e, 0x6f, 0x6f, 0x6f, 0x70, 0x70,
+ 0x70, 0x71, 0x71, 0x71, 0x71, 0x73, 0x73, 0x73,
+ 0x74, 0x74, 0x74, 0x74, 0x75, 0x75, 0x75, 0x77,
+ 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79, 0x79,
+ 0x79, 0x79, 0x7a, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b,
+ 0x7b, 0x7c, 0x7c, 0x7c, 0x7c, 0x7d, 0x7d, 0x7d,
+ 0x7d, 0x7f, 0x7f, 0x7f, 0x80, 0x80, 0x80, 0x80,
+ 0x81, 0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x82,
+ 0x84, 0x84, 0x84, 0x85, 0x85, 0x85, 0x85, 0x86,
+ 0x86, 0x86, 0x86, 0x88, 0x88, 0x88, 0x88, 0x89,
+ 0x89, 0x89, 0x89, 0x8a, 0x8a, 0x8a, 0x8a, 0x8b,
+ 0x8b, 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8d, 0x8e,
+ 0x8e, 0x8e, 0x8e, 0x8f, 0x8f, 0x8f, 0x8f, 0x90,
+ 0x90, 0x90, 0x90, 0x90, 0x91, 0x91, 0x91, 0x91,
+ 0x92, 0x92, 0x92, 0x92, 0x93, 0x93, 0x93, 0x93,
+ 0x94, 0x94, 0x94, 0x94, 0x96, 0x96, 0x96, 0x96,
+ 0x96, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98,
+ 0x98, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c,
+ 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d, 0x9d, 0x9e,
+ 0x9e, 0x9e, 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa0,
+ 0xa1, 0xa1, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2,
+ 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4,
+ 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa6,
+ 0xa6, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8, 0xa8,
+ 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xab, 0xab, 0xab,
+ 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xac, 0xad,
+ 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0,
+ 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2,
+ 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6,
+ 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7, 0xb7, 0xb8,
+ 0xb8, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xb9,
+ 0xb9, 0xba, 0xba, 0xba, 0xba, 0xba, 0xbc, 0xbc,
+ 0xbc, 0xbc, 0xbc, 0xbd, 0xbd, 0xbd, 0xbd, 0xbd,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf,
+ 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc7, 0xc7, 0xc7, 0xc7, 0xc7, 0xc9, 0xc9, 0xc9,
+ 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xca, 0xca,
+ 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc, 0xcc,
+ 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xce,
+ 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1,
+ 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3,
+ 0xd3, 0xd4, 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6,
+ 0xd6, 0xd6, 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd, 0xdd, 0xdd,
+ 0xdd, 0xde, 0xde, 0xde, 0xde, 0xde, 0xde, 0xdf,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0,
+ 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3,
+ 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5,
+ 0xe5, 0xe5, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7,
+ 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8,
+ 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb, 0xeb,
+ 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed,
+ 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x02,
+ 0x02, 0x03, 0x05, 0x07, 0x07, 0x08, 0x09, 0x09,
+ 0x0a, 0x0c, 0x0c, 0x0d, 0x0e, 0x0e, 0x10, 0x11,
+ 0x11, 0x12, 0x14, 0x14, 0x15, 0x16, 0x16, 0x17,
+ 0x17, 0x18, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1e,
+ 0x1e, 0x1f, 0x1f, 0x20, 0x20, 0x22, 0x23, 0x23,
+ 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x28, 0x28,
+ 0x29, 0x29, 0x2b, 0x2c, 0x2c, 0x2d, 0x2d, 0x2f,
+ 0x2f, 0x30, 0x30, 0x31, 0x31, 0x33, 0x33, 0x34,
+ 0x34, 0x34, 0x35, 0x35, 0x37, 0x37, 0x38, 0x38,
+ 0x39, 0x39, 0x3a, 0x3a, 0x3b, 0x3b, 0x3b, 0x3c,
+ 0x3c, 0x3d, 0x3d, 0x3f, 0x3f, 0x40, 0x40, 0x40,
+ 0x42, 0x42, 0x43, 0x43, 0x44, 0x44, 0x44, 0x45,
+ 0x45, 0x47, 0x47, 0x47, 0x48, 0x48, 0x49, 0x49,
+ 0x4a, 0x4a, 0x4a, 0x4b, 0x4b, 0x4b, 0x4c, 0x4c,
+ 0x4d, 0x4d, 0x4d, 0x4f, 0x4f, 0x50, 0x50, 0x50,
+ 0x52, 0x52, 0x52, 0x53, 0x53, 0x54, 0x54, 0x54,
+ 0x55, 0x55, 0x55, 0x56, 0x56, 0x58, 0x58, 0x58,
+ 0x59, 0x59, 0x59, 0x5a, 0x5a, 0x5a, 0x5b, 0x5b,
+ 0x5b, 0x5c, 0x5c, 0x5c, 0x5e, 0x5e, 0x5e, 0x5f,
+ 0x5f, 0x5f, 0x60, 0x60, 0x60, 0x61, 0x61, 0x61,
+ 0x62, 0x62, 0x62, 0x63, 0x63, 0x63, 0x65, 0x65,
+ 0x65, 0x66, 0x66, 0x66, 0x67, 0x67, 0x67, 0x68,
+ 0x68, 0x68, 0x69, 0x69, 0x69, 0x69, 0x6a, 0x6a,
+ 0x6a, 0x6c, 0x6c, 0x6c, 0x6d, 0x6d, 0x6d, 0x6e,
+ 0x6e, 0x6e, 0x6e, 0x6f, 0x6f, 0x6f, 0x70, 0x70,
+ 0x70, 0x71, 0x71, 0x71, 0x71, 0x73, 0x73, 0x73,
+ 0x74, 0x74, 0x74, 0x74, 0x75, 0x75, 0x75, 0x77,
+ 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79, 0x79,
+ 0x79, 0x79, 0x7a, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b,
+ 0x7b, 0x7c, 0x7c, 0x7c, 0x7c, 0x7d, 0x7d, 0x7d,
+ 0x7d, 0x7f, 0x7f, 0x7f, 0x80, 0x80, 0x80, 0x80,
+ 0x81, 0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x82,
+ 0x84, 0x84, 0x84, 0x85, 0x85, 0x85, 0x85, 0x86,
+ 0x86, 0x86, 0x86, 0x88, 0x88, 0x88, 0x88, 0x89,
+ 0x89, 0x89, 0x89, 0x8a, 0x8a, 0x8a, 0x8a, 0x8b,
+ 0x8b, 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8d, 0x8e,
+ 0x8e, 0x8e, 0x8e, 0x8f, 0x8f, 0x8f, 0x8f, 0x90,
+ 0x90, 0x90, 0x90, 0x90, 0x91, 0x91, 0x91, 0x91,
+ 0x92, 0x92, 0x92, 0x92, 0x93, 0x93, 0x93, 0x93,
+ 0x94, 0x94, 0x94, 0x94, 0x96, 0x96, 0x96, 0x96,
+ 0x96, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98,
+ 0x98, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c,
+ 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d, 0x9d, 0x9e,
+ 0x9e, 0x9e, 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa0,
+ 0xa1, 0xa1, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2,
+ 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4,
+ 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa6,
+ 0xa6, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8, 0xa8,
+ 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xab, 0xab, 0xab,
+ 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xac, 0xad,
+ 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0,
+ 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2,
+ 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6,
+ 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7, 0xb7, 0xb8,
+ 0xb8, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xb9,
+ 0xb9, 0xba, 0xba, 0xba, 0xba, 0xba, 0xbc, 0xbc,
+ 0xbc, 0xbc, 0xbc, 0xbd, 0xbd, 0xbd, 0xbd, 0xbd,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf,
+ 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc7, 0xc7, 0xc7, 0xc7, 0xc7, 0xc9, 0xc9, 0xc9,
+ 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xca, 0xca,
+ 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc, 0xcc,
+ 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xce,
+ 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1,
+ 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3,
+ 0xd3, 0xd4, 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6,
+ 0xd6, 0xd6, 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd, 0xdd, 0xdd,
+ 0xdd, 0xde, 0xde, 0xde, 0xde, 0xde, 0xde, 0xdf,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0,
+ 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3,
+ 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5,
+ 0xe5, 0xe5, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7,
+ 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8,
+ 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb, 0xeb,
+ 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed,
+ 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x02,
+ 0x02, 0x03, 0x05, 0x07, 0x07, 0x08, 0x09, 0x09,
+ 0x0a, 0x0c, 0x0c, 0x0d, 0x0e, 0x0e, 0x10, 0x11,
+ 0x11, 0x12, 0x14, 0x14, 0x15, 0x16, 0x16, 0x17,
+ 0x17, 0x18, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1e,
+ 0x1e, 0x1f, 0x1f, 0x20, 0x20, 0x22, 0x23, 0x23,
+ 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x28, 0x28,
+ 0x29, 0x29, 0x2b, 0x2c, 0x2c, 0x2d, 0x2d, 0x2f,
+ 0x2f, 0x30, 0x30, 0x31, 0x31, 0x33, 0x33, 0x34,
+ 0x34, 0x34, 0x35, 0x35, 0x37, 0x37, 0x38, 0x38,
+ 0x39, 0x39, 0x3a, 0x3a, 0x3b, 0x3b, 0x3b, 0x3c,
+ 0x3c, 0x3d, 0x3d, 0x3f, 0x3f, 0x40, 0x40, 0x40,
+ 0x42, 0x42, 0x43, 0x43, 0x44, 0x44, 0x44, 0x45,
+ 0x45, 0x47, 0x47, 0x47, 0x48, 0x48, 0x49, 0x49,
+ 0x4a, 0x4a, 0x4a, 0x4b, 0x4b, 0x4b, 0x4c, 0x4c,
+ 0x4d, 0x4d, 0x4d, 0x4f, 0x4f, 0x50, 0x50, 0x50,
+ 0x52, 0x52, 0x52, 0x53, 0x53, 0x54, 0x54, 0x54,
+ 0x55, 0x55, 0x55, 0x56, 0x56, 0x58, 0x58, 0x58,
+ 0x59, 0x59, 0x59, 0x5a, 0x5a, 0x5a, 0x5b, 0x5b,
+ 0x5b, 0x5c, 0x5c, 0x5c, 0x5e, 0x5e, 0x5e, 0x5f,
+ 0x5f, 0x5f, 0x60, 0x60, 0x60, 0x61, 0x61, 0x61,
+ 0x62, 0x62, 0x62, 0x63, 0x63, 0x63, 0x65, 0x65,
+ 0x65, 0x66, 0x66, 0x66, 0x67, 0x67, 0x67, 0x68,
+ 0x68, 0x68, 0x69, 0x69, 0x69, 0x69, 0x6a, 0x6a,
+ 0x6a, 0x6c, 0x6c, 0x6c, 0x6d, 0x6d, 0x6d, 0x6e,
+ 0x6e, 0x6e, 0x6e, 0x6f, 0x6f, 0x6f, 0x70, 0x70,
+ 0x70, 0x71, 0x71, 0x71, 0x71, 0x73, 0x73, 0x73,
+ 0x74, 0x74, 0x74, 0x74, 0x75, 0x75, 0x75, 0x76,
+ 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79, 0x79,
+ 0x79, 0x79, 0x7a, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b,
+ 0x7b, 0x7c, 0x7c, 0x7c, 0x7c, 0x7d, 0x7d, 0x7d,
+ 0x7d, 0x7f, 0x7f, 0x7f, 0x80, 0x80, 0x80, 0x80,
+ 0x81, 0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x82,
+ 0x84, 0x84, 0x84, 0x85, 0x85, 0x85, 0x85, 0x86,
+ 0x86, 0x86, 0x86, 0x88, 0x88, 0x88, 0x88, 0x89,
+ 0x89, 0x89, 0x89, 0x8a, 0x8a, 0x8a, 0x8a, 0x8b,
+ 0x8b, 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8d, 0x8e,
+ 0x8e, 0x8e, 0x8e, 0x8f, 0x8f, 0x8f, 0x8f, 0x90,
+ 0x90, 0x90, 0x90, 0x90, 0x91, 0x91, 0x91, 0x91,
+ 0x92, 0x92, 0x92, 0x92, 0x93, 0x93, 0x93, 0x93,
+ 0x94, 0x94, 0x94, 0x94, 0x96, 0x96, 0x96, 0x96,
+ 0x96, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98,
+ 0x98, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c,
+ 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d, 0x9d, 0x9e,
+ 0x9e, 0x9e, 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa0,
+ 0xa1, 0xa1, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2,
+ 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4,
+ 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa6,
+ 0xa6, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8, 0xa8,
+ 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xab, 0xab, 0xab,
+ 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xac, 0xad,
+ 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0,
+ 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2,
+ 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6,
+ 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7, 0xb7, 0xb8,
+ 0xb8, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xb9,
+ 0xb9, 0xba, 0xba, 0xba, 0xba, 0xba, 0xbc, 0xbc,
+ 0xbc, 0xbc, 0xbc, 0xbd, 0xbd, 0xbd, 0xbd, 0xbd,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf,
+ 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+ 0xc7, 0xc7, 0xc7, 0xc7, 0xc7, 0xc9, 0xc9, 0xc9,
+ 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xca, 0xca,
+ 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc, 0xcc,
+ 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xce,
+ 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1,
+ 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3,
+ 0xd3, 0xd4, 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6,
+ 0xd6, 0xd6, 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd, 0xdd, 0xdd,
+ 0xdd, 0xde, 0xde, 0xde, 0xde, 0xde, 0xde, 0xdf,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0,
+ 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3,
+ 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5,
+ 0xe5, 0xe5, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7,
+ 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8,
+ 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb, 0xeb,
+ 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed,
+ 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb}
+ },
+ { /* gamma 1 - from tp6810 + soi763a */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x02, 0x03, 0x05, 0x07, 0x08, 0x09, 0x0a,
+ 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x15,
+ 0x16, 0x17, 0x18, 0x1a, 0x1a, 0x1b, 0x1c, 0x1e,
+ 0x1f, 0x20, 0x22, 0x22, 0x23, 0x25, 0x26, 0x27,
+ 0x27, 0x28, 0x29, 0x2b, 0x2b, 0x2c, 0x2d, 0x2f,
+ 0x2f, 0x30, 0x31, 0x33, 0x33, 0x34, 0x35, 0x35,
+ 0x37, 0x38, 0x38, 0x39, 0x3a, 0x3a, 0x3b, 0x3c,
+ 0x3c, 0x3d, 0x3f, 0x3f, 0x40, 0x42, 0x42, 0x43,
+ 0x43, 0x44, 0x45, 0x45, 0x47, 0x47, 0x48, 0x49,
+ 0x49, 0x4a, 0x4a, 0x4b, 0x4b, 0x4c, 0x4d, 0x4d,
+ 0x4f, 0x4f, 0x50, 0x50, 0x52, 0x52, 0x53, 0x53,
+ 0x54, 0x54, 0x55, 0x56, 0x56, 0x58, 0x58, 0x59,
+ 0x59, 0x5a, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c, 0x5e,
+ 0x5e, 0x5e, 0x5f, 0x5f, 0x60, 0x60, 0x61, 0x61,
+ 0x62, 0x62, 0x63, 0x63, 0x65, 0x65, 0x65, 0x66,
+ 0x66, 0x67, 0x67, 0x68, 0x68, 0x69, 0x69, 0x69,
+ 0x6a, 0x6a, 0x6c, 0x6c, 0x6d, 0x6d, 0x6d, 0x6e,
+ 0x6e, 0x6f, 0x6f, 0x6f, 0x70, 0x70, 0x71, 0x71,
+ 0x73, 0x73, 0x73, 0x74, 0x74, 0x74, 0x75, 0x75,
+ 0x77, 0x77, 0x77, 0x78, 0x78, 0x79, 0x79, 0x79,
+ 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c,
+ 0x7d, 0x7d, 0x7d, 0x7f, 0x7f, 0x80, 0x80, 0x80,
+ 0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x84, 0x84,
+ 0x84, 0x85, 0x85, 0x85, 0x86, 0x86, 0x86, 0x88,
+ 0x88, 0x88, 0x89, 0x89, 0x89, 0x8a, 0x8a, 0x8a,
+ 0x8b, 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8e, 0x8e,
+ 0x8e, 0x8f, 0x8f, 0x8f, 0x90, 0x90, 0x90, 0x91,
+ 0x91, 0x91, 0x92, 0x92, 0x92, 0x92, 0x93, 0x93,
+ 0x93, 0x94, 0x94, 0x94, 0x96, 0x96, 0x96, 0x97,
+ 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x99, 0x99,
+ 0x99, 0x9a, 0x9a, 0x9a, 0x9a, 0x9b, 0x9b, 0x9b,
+ 0x9c, 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d, 0x9e,
+ 0x9e, 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1,
+ 0xa1, 0xa1, 0xa2, 0xa2, 0xa2, 0xa2, 0xa3, 0xa3,
+ 0xa3, 0xa4, 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5,
+ 0xa5, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8, 0xa8,
+ 0xa9, 0xa9, 0xa9, 0xa9, 0xab, 0xab, 0xab, 0xab,
+ 0xac, 0xac, 0xac, 0xad, 0xad, 0xad, 0xad, 0xae,
+ 0xae, 0xae, 0xae, 0xaf, 0xaf, 0xaf, 0xaf, 0xb0,
+ 0xb0, 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2,
+ 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3, 0xb4,
+ 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6, 0xb6, 0xb7,
+ 0xb7, 0xb7, 0xb7, 0xb7, 0xb8, 0xb8, 0xb8, 0xb8,
+ 0xb9, 0xb9, 0xb9, 0xb9, 0xba, 0xba, 0xba, 0xba,
+ 0xbc, 0xbc, 0xbc, 0xbc, 0xbd, 0xbd, 0xbd, 0xbd,
+ 0xbd, 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf,
+ 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2, 0xc2,
+ 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc3, 0xc4, 0xc4,
+ 0xc4, 0xc4, 0xc4, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7,
+ 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca,
+ 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc,
+ 0xcc, 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xcd, 0xce,
+ 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1, 0xd1,
+ 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3, 0xd3, 0xd4,
+ 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6,
+ 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8,
+ 0xd8, 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xd9, 0xda,
+ 0xda, 0xda, 0xda, 0xda, 0xdb, 0xdb, 0xdb, 0xdb,
+ 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde,
+ 0xde, 0xde, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xe0,
+ 0xe0, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1, 0xe1, 0xe1,
+ 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3,
+ 0xe3, 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4,
+ 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6,
+ 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7, 0xe8,
+ 0xe8, 0xe8, 0xe8, 0xe8, 0xe9, 0xe9, 0xe9, 0xe9,
+ 0xe9, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec,
+ 0xec, 0xec, 0xec, 0xed, 0xed, 0xed, 0xed, 0xed,
+ 0xee, 0xee, 0xee, 0xee, 0xee, 0xef, 0xef, 0xef,
+ 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3, 0xf3, 0xf3,
+ 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5,
+ 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6,
+ 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9,
+ 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
+ 0xfc, 0xfc, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfe,
+ 0xfe, 0xfe, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03,
+ 0x05, 0x07, 0x07, 0x08, 0x09, 0x0a, 0x0c, 0x0d,
+ 0x0e, 0x10, 0x10, 0x11, 0x12, 0x14, 0x15, 0x15,
+ 0x16, 0x17, 0x18, 0x1a, 0x1a, 0x1b, 0x1c, 0x1e,
+ 0x1e, 0x1f, 0x20, 0x20, 0x22, 0x23, 0x25, 0x25,
+ 0x26, 0x27, 0x27, 0x28, 0x29, 0x29, 0x2b, 0x2c,
+ 0x2c, 0x2d, 0x2d, 0x2f, 0x30, 0x30, 0x31, 0x31,
+ 0x33, 0x34, 0x34, 0x35, 0x35, 0x37, 0x38, 0x38,
+ 0x39, 0x39, 0x3a, 0x3a, 0x3b, 0x3b, 0x3c, 0x3d,
+ 0x3d, 0x3f, 0x3f, 0x40, 0x40, 0x42, 0x42, 0x43,
+ 0x43, 0x44, 0x44, 0x45, 0x45, 0x47, 0x47, 0x48,
+ 0x48, 0x49, 0x49, 0x4a, 0x4a, 0x4b, 0x4b, 0x4c,
+ 0x4c, 0x4d, 0x4d, 0x4d, 0x4f, 0x4f, 0x50, 0x50,
+ 0x52, 0x52, 0x53, 0x53, 0x53, 0x54, 0x54, 0x55,
+ 0x55, 0x56, 0x56, 0x56, 0x58, 0x58, 0x59, 0x59,
+ 0x5a, 0x5a, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c, 0x5c,
+ 0x5e, 0x5e, 0x5f, 0x5f, 0x5f, 0x60, 0x60, 0x60,
+ 0x61, 0x61, 0x62, 0x62, 0x62, 0x63, 0x63, 0x65,
+ 0x65, 0x65, 0x66, 0x66, 0x66, 0x67, 0x67, 0x67,
+ 0x68, 0x68, 0x69, 0x69, 0x69, 0x6a, 0x6a, 0x6a,
+ 0x6c, 0x6c, 0x6c, 0x6d, 0x6d, 0x6d, 0x6e, 0x6e,
+ 0x6e, 0x6f, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71,
+ 0x71, 0x71, 0x73, 0x73, 0x73, 0x74, 0x74, 0x74,
+ 0x75, 0x75, 0x75, 0x77, 0x77, 0x77, 0x78, 0x78,
+ 0x78, 0x79, 0x79, 0x79, 0x79, 0x7a, 0x7a, 0x7a,
+ 0x7b, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c, 0x7c, 0x7d,
+ 0x7d, 0x7d, 0x7f, 0x7f, 0x7f, 0x80, 0x80, 0x80,
+ 0x80, 0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x82,
+ 0x84, 0x84, 0x84, 0x85, 0x85, 0x85, 0x85, 0x86,
+ 0x86, 0x86, 0x88, 0x88, 0x88, 0x88, 0x89, 0x89,
+ 0x89, 0x89, 0x8a, 0x8a, 0x8a, 0x8b, 0x8b, 0x8b,
+ 0x8b, 0x8d, 0x8d, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e,
+ 0x8e, 0x8f, 0x8f, 0x8f, 0x90, 0x90, 0x90, 0x90,
+ 0x91, 0x91, 0x91, 0x91, 0x92, 0x92, 0x92, 0x92,
+ 0x93, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x94,
+ 0x96, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x97,
+ 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x99, 0x99,
+ 0x9a, 0x9a, 0x9a, 0x9a, 0x9a, 0x9b, 0x9b, 0x9b,
+ 0x9b, 0x9c, 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d,
+ 0x9d, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0xa0, 0xa0,
+ 0xa0, 0xa0, 0xa1, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2,
+ 0xa2, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4,
+ 0xa4, 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5,
+ 0xa6, 0xa6, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8,
+ 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xa9, 0xab, 0xab,
+ 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xac, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0,
+ 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2,
+ 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6,
+ 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7, 0xb7, 0xb8,
+ 0xb8, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xb9,
+ 0xb9, 0xba, 0xba, 0xba, 0xba, 0xba, 0xbc, 0xbc,
+ 0xbc, 0xbc, 0xbc, 0xbd, 0xbd, 0xbd, 0xbd, 0xbd,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf,
+ 0xbf, 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7, 0xc7, 0xc9,
+ 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca,
+ 0xca, 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc,
+ 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd, 0xcd,
+ 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce, 0xce, 0xcf,
+ 0xcf, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0, 0xd0,
+ 0xd0, 0xd0, 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd1,
+ 0xd3, 0xd3, 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4,
+ 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6,
+ 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8,
+ 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd, 0xdd, 0xdd,
+ 0xdd, 0xde, 0xde, 0xde, 0xde, 0xde, 0xde, 0xdf,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0,
+ 0xe0, 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2,
+ 0xe2, 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3,
+ 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4,
+ 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6,
+ 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7,
+ 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9, 0xe9,
+ 0xe9, 0xe9, 0xe9, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb,
+ 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed, 0xed,
+ 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1,
+ 0xf1, 0xf1, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf4,
+ 0xf4, 0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5,
+ 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfc, 0xfc,
+ 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
+ 0xfc, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfe, 0xfe,
+ 0xfe, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x01, 0x02, 0x03, 0x05, 0x05, 0x07,
+ 0x08, 0x09, 0x0a, 0x0a, 0x0c, 0x0d, 0x0e, 0x0e,
+ 0x10, 0x11, 0x12, 0x12, 0x14, 0x15, 0x16, 0x16,
+ 0x17, 0x18, 0x18, 0x1a, 0x1b, 0x1b, 0x1c, 0x1e,
+ 0x1e, 0x1f, 0x1f, 0x20, 0x22, 0x22, 0x23, 0x23,
+ 0x25, 0x26, 0x26, 0x27, 0x27, 0x28, 0x29, 0x29,
+ 0x2b, 0x2b, 0x2c, 0x2c, 0x2d, 0x2d, 0x2f, 0x30,
+ 0x30, 0x31, 0x31, 0x33, 0x33, 0x34, 0x34, 0x35,
+ 0x35, 0x37, 0x37, 0x38, 0x38, 0x39, 0x39, 0x3a,
+ 0x3a, 0x3b, 0x3b, 0x3b, 0x3c, 0x3c, 0x3d, 0x3d,
+ 0x3f, 0x3f, 0x40, 0x40, 0x42, 0x42, 0x42, 0x43,
+ 0x43, 0x44, 0x44, 0x45, 0x45, 0x47, 0x47, 0x47,
+ 0x48, 0x48, 0x49, 0x49, 0x49, 0x4a, 0x4a, 0x4b,
+ 0x4b, 0x4b, 0x4c, 0x4c, 0x4d, 0x4d, 0x4d, 0x4f,
+ 0x4f, 0x50, 0x50, 0x50, 0x52, 0x52, 0x52, 0x53,
+ 0x53, 0x54, 0x54, 0x54, 0x55, 0x55, 0x55, 0x56,
+ 0x56, 0x58, 0x58, 0x58, 0x59, 0x59, 0x59, 0x5a,
+ 0x5a, 0x5a, 0x5b, 0x5b, 0x5b, 0x5c, 0x5c, 0x5c,
+ 0x5e, 0x5e, 0x5e, 0x5f, 0x5f, 0x5f, 0x60, 0x60,
+ 0x60, 0x61, 0x61, 0x61, 0x62, 0x62, 0x62, 0x63,
+ 0x63, 0x63, 0x65, 0x65, 0x65, 0x66, 0x66, 0x66,
+ 0x66, 0x67, 0x67, 0x67, 0x68, 0x68, 0x68, 0x69,
+ 0x69, 0x69, 0x6a, 0x6a, 0x6a, 0x6a, 0x6c, 0x6c,
+ 0x6c, 0x6d, 0x6d, 0x6d, 0x6d, 0x6e, 0x6e, 0x6e,
+ 0x6f, 0x6f, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71,
+ 0x71, 0x71, 0x71, 0x73, 0x73, 0x73, 0x74, 0x74,
+ 0x74, 0x74, 0x75, 0x75, 0x75, 0x75, 0x77, 0x77,
+ 0x77, 0x78, 0x78, 0x78, 0x78, 0x79, 0x79, 0x79,
+ 0x79, 0x7a, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b,
+ 0x7b, 0x7c, 0x7c, 0x7c, 0x7c, 0x7d, 0x7d, 0x7d,
+ 0x7d, 0x7f, 0x7f, 0x7f, 0x7f, 0x80, 0x80, 0x80,
+ 0x80, 0x81, 0x81, 0x81, 0x81, 0x82, 0x82, 0x82,
+ 0x82, 0x84, 0x84, 0x84, 0x84, 0x85, 0x85, 0x85,
+ 0x85, 0x86, 0x86, 0x86, 0x86, 0x88, 0x88, 0x88,
+ 0x88, 0x88, 0x89, 0x89, 0x89, 0x89, 0x8a, 0x8a,
+ 0x8a, 0x8a, 0x8b, 0x8b, 0x8b, 0x8b, 0x8b, 0x8d,
+ 0x8d, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e, 0x8e, 0x8e,
+ 0x8f, 0x8f, 0x8f, 0x8f, 0x90, 0x90, 0x90, 0x90,
+ 0x90, 0x91, 0x91, 0x91, 0x91, 0x92, 0x92, 0x92,
+ 0x92, 0x92, 0x93, 0x93, 0x93, 0x93, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x96, 0x96, 0x96, 0x96, 0x96,
+ 0x97, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98,
+ 0x98, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9b, 0x9b,
+ 0x9c, 0x9c, 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d,
+ 0x9d, 0x9d, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0xa0,
+ 0xa0, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1, 0xa1, 0xa1,
+ 0xa1, 0xa2, 0xa2, 0xa2, 0xa2, 0xa2, 0xa3, 0xa3,
+ 0xa3, 0xa3, 0xa3, 0xa4, 0xa4, 0xa4, 0xa4, 0xa4,
+ 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa6, 0xa6,
+ 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8, 0xa8, 0xa8,
+ 0xa9, 0xa9, 0xa9, 0xa9, 0xa9, 0xa9, 0xab, 0xab,
+ 0xab, 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xac,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xad, 0xae, 0xae,
+ 0xae, 0xae, 0xae, 0xaf, 0xaf, 0xaf, 0xaf, 0xaf,
+ 0xaf, 0xb0, 0xb0, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1,
+ 0xb1, 0xb1, 0xb1, 0xb1, 0xb2, 0xb2, 0xb2, 0xb2,
+ 0xb2, 0xb3, 0xb3, 0xb3, 0xb3, 0xb3, 0xb3, 0xb4,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6, 0xb6,
+ 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7, 0xb7, 0xb7,
+ 0xb8, 0xb8, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9,
+ 0xb9, 0xb9, 0xb9, 0xba, 0xba, 0xba, 0xba, 0xba,
+ 0xba, 0xbc, 0xbc, 0xbc, 0xbc, 0xbc, 0xbd, 0xbd,
+ 0xbd, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbe, 0xbe, 0xbf, 0xbf, 0xbf, 0xbf, 0xbf, 0xbf,
+ 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2, 0xc2,
+ 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7, 0xc7,
+ 0xc7, 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca,
+ 0xca, 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb, 0xcb,
+ 0xcb, 0xcb, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc,
+ 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xce, 0xce,
+ 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0,
+ 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3,
+ 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4, 0xd4, 0xd4,
+ 0xd4, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd7,
+ 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8,
+ 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd, 0xdd, 0xdd,
+ 0xdd, 0xdd, 0xde, 0xde, 0xde, 0xde, 0xde, 0xde,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0,
+ 0xe0, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1, 0xe1, 0xe1,
+ 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2, 0xe3,
+ 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe4, 0xe4, 0xe4,
+ 0xe4, 0xe4, 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe5,
+ 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7, 0xe7,
+ 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8,
+ 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb,
+ 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec,
+ 0xec, 0xed, 0xed, 0xed, 0xed, 0xed, 0xed, 0xee,
+ 0xee, 0xee, 0xee, 0xee, 0xef, 0xef, 0xef, 0xef,
+ 0xef, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf1,
+ 0xf1, 0xf1, 0xf1, 0xf1, 0xf3, 0xf3, 0xf3, 0xf3,
+ 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5, 0xf5,
+ 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfc, 0xfc, 0xfc,
+ 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfd,
+ 0xfd, 0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}
+ },
+ { /* gamma 2 */
+ {0x00, 0x01, 0x02, 0x05, 0x07, 0x08, 0x0a, 0x0c,
+ 0x0d, 0x0e, 0x10, 0x12, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x1a, 0x1b, 0x1c, 0x1e, 0x1f, 0x20, 0x22,
+ 0x23, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2b, 0x2c,
+ 0x2d, 0x2d, 0x2f, 0x30, 0x31, 0x33, 0x34, 0x34,
+ 0x35, 0x37, 0x38, 0x38, 0x39, 0x3a, 0x3b, 0x3b,
+ 0x3c, 0x3d, 0x3f, 0x3f, 0x40, 0x42, 0x42, 0x43,
+ 0x44, 0x44, 0x45, 0x47, 0x47, 0x48, 0x49, 0x49,
+ 0x4a, 0x4b, 0x4b, 0x4c, 0x4c, 0x4d, 0x4f, 0x4f,
+ 0x50, 0x50, 0x52, 0x53, 0x53, 0x54, 0x54, 0x55,
+ 0x55, 0x56, 0x56, 0x58, 0x58, 0x59, 0x5a, 0x5a,
+ 0x5b, 0x5b, 0x5c, 0x5c, 0x5e, 0x5e, 0x5f, 0x5f,
+ 0x60, 0x60, 0x61, 0x61, 0x62, 0x62, 0x63, 0x63,
+ 0x65, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x68,
+ 0x68, 0x69, 0x69, 0x6a, 0x6a, 0x6a, 0x6c, 0x6c,
+ 0x6d, 0x6d, 0x6e, 0x6e, 0x6e, 0x6f, 0x6f, 0x70,
+ 0x70, 0x70, 0x71, 0x71, 0x73, 0x73, 0x73, 0x74,
+ 0x74, 0x75, 0x75, 0x75, 0x77, 0x77, 0x78, 0x78,
+ 0x78, 0x79, 0x79, 0x79, 0x7a, 0x7a, 0x7b, 0x7b,
+ 0x7b, 0x7c, 0x7c, 0x7c, 0x7d, 0x7d, 0x7f, 0x7f,
+ 0x7f, 0x80, 0x80, 0x80, 0x81, 0x81, 0x81, 0x82,
+ 0x82, 0x82, 0x84, 0x84, 0x84, 0x85, 0x85, 0x85,
+ 0x86, 0x86, 0x86, 0x88, 0x88, 0x88, 0x89, 0x89,
+ 0x89, 0x8a, 0x8a, 0x8a, 0x8b, 0x8b, 0x8b, 0x8d,
+ 0x8d, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e, 0x8f, 0x8f,
+ 0x8f, 0x90, 0x90, 0x90, 0x91, 0x91, 0x91, 0x91,
+ 0x92, 0x92, 0x92, 0x93, 0x93, 0x93, 0x93, 0x94,
+ 0x94, 0x94, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97,
+ 0x97, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x99,
+ 0x9a, 0x9a, 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9b,
+ 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d, 0x9d, 0x9e,
+ 0x9e, 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa0, 0xa1,
+ 0xa1, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2, 0xa2, 0xa3,
+ 0xa3, 0xa3, 0xa4, 0xa4, 0xa4, 0xa4, 0xa5, 0xa5,
+ 0xa5, 0xa5, 0xa5, 0xa6, 0xa6, 0xa6, 0xa6, 0xa8,
+ 0xa8, 0xa8, 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xab,
+ 0xab, 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb0,
+ 0xb0, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2, 0xb2, 0xb2,
+ 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3, 0xb4, 0xb4,
+ 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6, 0xb6, 0xb7,
+ 0xb7, 0xb7, 0xb7, 0xb7, 0xb8, 0xb8, 0xb8, 0xb8,
+ 0xb8, 0xb9, 0xb9, 0xb9, 0xb9, 0xba, 0xba, 0xba,
+ 0xba, 0xba, 0xbc, 0xbc, 0xbc, 0xbc, 0xbc, 0xbd,
+ 0xbd, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbe, 0xbf, 0xbf, 0xbf, 0xbf, 0xbf, 0xc0, 0xc0,
+ 0xc0, 0xc0, 0xc0, 0xc2, 0xc2, 0xc2, 0xc2, 0xc3,
+ 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4,
+ 0xc4, 0xc4, 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7,
+ 0xc7, 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca,
+ 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb,
+ 0xcb, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd,
+ 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce, 0xce,
+ 0xce, 0xcf, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0,
+ 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1, 0xd1, 0xd1,
+ 0xd1, 0xd3, 0xd3, 0xd3, 0xd3, 0xd3, 0xd4, 0xd4,
+ 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd6,
+ 0xd6, 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xda,
+ 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd,
+ 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde, 0xde, 0xde,
+ 0xde, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xe0,
+ 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1, 0xe1,
+ 0xe1, 0xe1, 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2,
+ 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe4, 0xe4,
+ 0xe4, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5, 0xe5,
+ 0xe5, 0xe5, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+ 0xe7, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8,
+ 0xe8, 0xe8, 0xe8, 0xe8, 0xe9, 0xe9, 0xe9, 0xe9,
+ 0xe9, 0xe9, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb,
+ 0xec, 0xec, 0xec, 0xec, 0xec, 0xed, 0xed, 0xed,
+ 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf1, 0xf1, 0xf1,
+ 0xf1, 0xf1, 0xf1, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3,
+ 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5,
+ 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9,
+ 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb},
+ {0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03, 0x05,
+ 0x07, 0x08, 0x09, 0x0a, 0x0d, 0x0e, 0x10, 0x11,
+ 0x12, 0x14, 0x15, 0x16, 0x16, 0x17, 0x18, 0x1a,
+ 0x1b, 0x1c, 0x1e, 0x1f, 0x20, 0x20, 0x22, 0x23,
+ 0x25, 0x26, 0x26, 0x27, 0x28, 0x29, 0x29, 0x2b,
+ 0x2c, 0x2d, 0x2d, 0x2f, 0x30, 0x30, 0x31, 0x33,
+ 0x33, 0x34, 0x35, 0x35, 0x37, 0x38, 0x38, 0x39,
+ 0x3a, 0x3a, 0x3b, 0x3b, 0x3c, 0x3d, 0x3d, 0x3f,
+ 0x3f, 0x40, 0x42, 0x42, 0x43, 0x43, 0x44, 0x44,
+ 0x45, 0x45, 0x47, 0x47, 0x48, 0x48, 0x49, 0x4a,
+ 0x4a, 0x4b, 0x4b, 0x4c, 0x4c, 0x4d, 0x4d, 0x4d,
+ 0x4f, 0x4f, 0x50, 0x50, 0x52, 0x52, 0x53, 0x53,
+ 0x54, 0x54, 0x55, 0x55, 0x56, 0x56, 0x56, 0x58,
+ 0x58, 0x59, 0x59, 0x5a, 0x5a, 0x5a, 0x5b, 0x5b,
+ 0x5c, 0x5c, 0x5c, 0x5e, 0x5e, 0x5f, 0x5f, 0x5f,
+ 0x60, 0x60, 0x61, 0x61, 0x61, 0x62, 0x62, 0x63,
+ 0x63, 0x63, 0x65, 0x65, 0x65, 0x66, 0x66, 0x67,
+ 0x67, 0x67, 0x68, 0x68, 0x68, 0x69, 0x69, 0x69,
+ 0x6a, 0x6a, 0x6c, 0x6c, 0x6c, 0x6d, 0x6d, 0x6d,
+ 0x6e, 0x6e, 0x6e, 0x6f, 0x6f, 0x6f, 0x70, 0x70,
+ 0x70, 0x71, 0x71, 0x71, 0x73, 0x73, 0x73, 0x73,
+ 0x74, 0x74, 0x74, 0x75, 0x75, 0x75, 0x77, 0x77,
+ 0x77, 0x78, 0x78, 0x78, 0x79, 0x79, 0x79, 0x79,
+ 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7b, 0x7c,
+ 0x7c, 0x7c, 0x7d, 0x7d, 0x7d, 0x7d, 0x7f, 0x7f,
+ 0x7f, 0x80, 0x80, 0x80, 0x80, 0x81, 0x81, 0x81,
+ 0x82, 0x82, 0x82, 0x82, 0x84, 0x84, 0x84, 0x84,
+ 0x85, 0x85, 0x85, 0x85, 0x86, 0x86, 0x86, 0x88,
+ 0x88, 0x88, 0x88, 0x89, 0x89, 0x89, 0x89, 0x8a,
+ 0x8a, 0x8a, 0x8a, 0x8b, 0x8b, 0x8b, 0x8b, 0x8d,
+ 0x8d, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e, 0x8e, 0x8f,
+ 0x8f, 0x8f, 0x8f, 0x90, 0x90, 0x90, 0x90, 0x91,
+ 0x91, 0x91, 0x91, 0x91, 0x92, 0x92, 0x92, 0x92,
+ 0x93, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x96, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97,
+ 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99,
+ 0x99, 0x99, 0x99, 0x9a, 0x9a, 0x9a, 0x9a, 0x9b,
+ 0x9b, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c, 0x9c, 0x9c,
+ 0x9d, 0x9d, 0x9d, 0x9d, 0x9d, 0x9e, 0x9e, 0x9e,
+ 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa1,
+ 0xa1, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2, 0xa2,
+ 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4,
+ 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5,
+ 0xa6, 0xa6, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8,
+ 0xa8, 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xa9, 0xab,
+ 0xab, 0xab, 0xab, 0xab, 0xac, 0xac, 0xac, 0xac,
+ 0xac, 0xac, 0xad, 0xad, 0xad, 0xad, 0xad, 0xae,
+ 0xae, 0xae, 0xae, 0xae, 0xaf, 0xaf, 0xaf, 0xaf,
+ 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb0, 0xb0, 0xb1,
+ 0xb1, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2, 0xb2, 0xb2,
+ 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb4, 0xb4, 0xb6, 0xb6,
+ 0xb6, 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7, 0xb7,
+ 0xb7, 0xb8, 0xb8, 0xb8, 0xb8, 0xb8, 0xb8, 0xb9,
+ 0xb9, 0xb9, 0xb9, 0xb9, 0xba, 0xba, 0xba, 0xba,
+ 0xba, 0xba, 0xbc, 0xbc, 0xbc, 0xbc, 0xbc, 0xbc,
+ 0xbd, 0xbd, 0xbd, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf, 0xbf,
+ 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3,
+ 0xc3, 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc4,
+ 0xc4, 0xc4, 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc5,
+ 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc7, 0xc7,
+ 0xc7, 0xc7, 0xc7, 0xc7, 0xc7, 0xc9, 0xc9, 0xc9,
+ 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xca, 0xca,
+ 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc,
+ 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd,
+ 0xcd, 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce,
+ 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1,
+ 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3,
+ 0xd3, 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4, 0xd4,
+ 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6,
+ 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda,
+ 0xda, 0xda, 0xda, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb,
+ 0xdb, 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xdd,
+ 0xde, 0xde, 0xde, 0xde, 0xde, 0xde, 0xdf, 0xdf,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0,
+ 0xe0, 0xe0, 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1,
+ 0xe1, 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2,
+ 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe4,
+ 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5,
+ 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6, 0xe6,
+ 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7,
+ 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9,
+ 0xe9, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb, 0xeb,
+ 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec,
+ 0xec, 0xec, 0xed, 0xed, 0xed, 0xed, 0xed, 0xed,
+ 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xef,
+ 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1,
+ 0xf1, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf4,
+ 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5, 0xf5,
+ 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9,
+ 0xf9, 0xf9, 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb},
+ {0x00, 0x00, 0x00, 0x01, 0x02, 0x05, 0x07, 0x08,
+ 0x09, 0x0a, 0x0c, 0x0e, 0x10, 0x11, 0x12, 0x14,
+ 0x15, 0x16, 0x17, 0x18, 0x1a, 0x1b, 0x1c, 0x1e,
+ 0x1f, 0x20, 0x20, 0x22, 0x23, 0x25, 0x26, 0x27,
+ 0x28, 0x28, 0x29, 0x2b, 0x2c, 0x2d, 0x2d, 0x2f,
+ 0x30, 0x31, 0x31, 0x33, 0x34, 0x35, 0x35, 0x37,
+ 0x38, 0x38, 0x39, 0x3a, 0x3a, 0x3b, 0x3c, 0x3c,
+ 0x3d, 0x3f, 0x3f, 0x40, 0x40, 0x42, 0x43, 0x43,
+ 0x44, 0x44, 0x45, 0x47, 0x47, 0x48, 0x48, 0x49,
+ 0x4a, 0x4a, 0x4b, 0x4b, 0x4c, 0x4c, 0x4d, 0x4d,
+ 0x4f, 0x4f, 0x50, 0x50, 0x52, 0x52, 0x53, 0x53,
+ 0x54, 0x54, 0x55, 0x55, 0x56, 0x56, 0x58, 0x58,
+ 0x59, 0x59, 0x5a, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c,
+ 0x5c, 0x5e, 0x5e, 0x5f, 0x5f, 0x60, 0x60, 0x61,
+ 0x61, 0x61, 0x62, 0x62, 0x63, 0x63, 0x65, 0x65,
+ 0x65, 0x66, 0x66, 0x67, 0x67, 0x67, 0x68, 0x68,
+ 0x69, 0x69, 0x69, 0x6a, 0x6a, 0x6a, 0x6c, 0x6c,
+ 0x6d, 0x6d, 0x6d, 0x6e, 0x6e, 0x6e, 0x6f, 0x6f,
+ 0x70, 0x70, 0x70, 0x71, 0x71, 0x71, 0x73, 0x73,
+ 0x73, 0x74, 0x74, 0x74, 0x75, 0x75, 0x75, 0x77,
+ 0x77, 0x78, 0x78, 0x78, 0x79, 0x79, 0x79, 0x7a,
+ 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7c, 0x7c,
+ 0x7c, 0x7d, 0x7d, 0x7d, 0x7f, 0x7f, 0x7f, 0x80,
+ 0x80, 0x80, 0x81, 0x81, 0x81, 0x81, 0x82, 0x82,
+ 0x82, 0x84, 0x84, 0x84, 0x85, 0x85, 0x85, 0x85,
+ 0x86, 0x86, 0x86, 0x88, 0x88, 0x88, 0x88, 0x89,
+ 0x89, 0x89, 0x8a, 0x8a, 0x8a, 0x8a, 0x8b, 0x8b,
+ 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e,
+ 0x8e, 0x8f, 0x8f, 0x8f, 0x8f, 0x90, 0x90, 0x90,
+ 0x91, 0x91, 0x91, 0x91, 0x92, 0x92, 0x92, 0x92,
+ 0x93, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x94,
+ 0x96, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x97,
+ 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x99, 0x99,
+ 0x9a, 0x9a, 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9b,
+ 0x9b, 0x9c, 0x9c, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d,
+ 0x9d, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0xa0, 0xa0,
+ 0xa0, 0xa0, 0xa1, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2,
+ 0xa2, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4,
+ 0xa4, 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5,
+ 0xa5, 0xa6, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8,
+ 0xa8, 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xa9, 0xab,
+ 0xab, 0xab, 0xab, 0xab, 0xac, 0xac, 0xac, 0xac,
+ 0xad, 0xad, 0xad, 0xad, 0xad, 0xae, 0xae, 0xae,
+ 0xae, 0xae, 0xaf, 0xaf, 0xaf, 0xaf, 0xaf, 0xb0,
+ 0xb0, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1,
+ 0xb1, 0xb2, 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3,
+ 0xb3, 0xb3, 0xb3, 0xb4, 0xb3, 0xb4, 0xb4, 0xb4,
+ 0xb6, 0xb6, 0xb6, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7,
+ 0xb7, 0xb7, 0xb7, 0xb8, 0xb8, 0xb8, 0xb8, 0xb8,
+ 0xb9, 0xb9, 0xb9, 0xb9, 0xb9, 0xb9, 0xba, 0xba,
+ 0xba, 0xba, 0xba, 0xbc, 0xbc, 0xbc, 0xbc, 0xbc,
+ 0xbd, 0xbd, 0xbd, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe,
+ 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf, 0xbf, 0xbf,
+ 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2, 0xc2,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7, 0xc7,
+ 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca,
+ 0xca, 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb, 0xcb,
+ 0xcb, 0xcb, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc,
+ 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xce, 0xce,
+ 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd0,
+ 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3,
+ 0xd3, 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4, 0xd4,
+ 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6,
+ 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xda,
+ 0xda, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0xdd,
+ 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde,
+ 0xde, 0xde, 0xde, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf,
+ 0xdf, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0,
+ 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3,
+ 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4,
+ 0xe4, 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6,
+ 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7,
+ 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8,
+ 0xe8, 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xe9, 0xe9,
+ 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec,
+ 0xec, 0xec, 0xec, 0xec, 0xec, 0xed, 0xed, 0xed,
+ 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf1, 0xf1,
+ 0xf1, 0xf1, 0xf1, 0xf1, 0xf3, 0xf3, 0xf3, 0xf3,
+ 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4,
+ 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8,
+ 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb}
+ },
+ { /* gamma 3 - from tp6810 + cx0342 */
+ {0x08, 0x09, 0x0c, 0x0d, 0x10, 0x11, 0x14, 0x15,
+ 0x17, 0x18, 0x1a, 0x1c, 0x1e, 0x1f, 0x20, 0x23,
+ 0x25, 0x26, 0x27, 0x28, 0x2b, 0x2c, 0x2d, 0x2f,
+ 0x30, 0x31, 0x33, 0x34, 0x35, 0x37, 0x38, 0x39,
+ 0x3a, 0x3b, 0x3c, 0x3d, 0x3f, 0x40, 0x42, 0x43,
+ 0x44, 0x45, 0x47, 0x48, 0x48, 0x49, 0x4a, 0x4b,
+ 0x4c, 0x4d, 0x4d, 0x4f, 0x50, 0x52, 0x53, 0x53,
+ 0x54, 0x55, 0x56, 0x56, 0x58, 0x59, 0x5a, 0x5a,
+ 0x5b, 0x5c, 0x5c, 0x5e, 0x5f, 0x5f, 0x60, 0x61,
+ 0x61, 0x62, 0x63, 0x63, 0x65, 0x66, 0x66, 0x67,
+ 0x68, 0x68, 0x69, 0x69, 0x6a, 0x6c, 0x6c, 0x6d,
+ 0x6d, 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x71, 0x73,
+ 0x73, 0x74, 0x74, 0x75, 0x75, 0x77, 0x77, 0x78,
+ 0x78, 0x79, 0x7a, 0x7a, 0x7b, 0x7b, 0x7c, 0x7c,
+ 0x7d, 0x7d, 0x7f, 0x7f, 0x80, 0x80, 0x81, 0x81,
+ 0x82, 0x82, 0x84, 0x84, 0x85, 0x85, 0x86, 0x86,
+ 0x86, 0x88, 0x88, 0x89, 0x89, 0x8a, 0x8a, 0x8b,
+ 0x8b, 0x8d, 0x8d, 0x8d, 0x8e, 0x8e, 0x8f, 0x8f,
+ 0x90, 0x90, 0x91, 0x91, 0x91, 0x92, 0x92, 0x93,
+ 0x93, 0x93, 0x94, 0x94, 0x96, 0x96, 0x97, 0x97,
+ 0x97, 0x98, 0x98, 0x99, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9b, 0x9b, 0x9c, 0x9c, 0x9c, 0x9d, 0x9d,
+ 0x9e, 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1,
+ 0xa2, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4,
+ 0xa4, 0xa5, 0xa5, 0xa5, 0xa6, 0xa6, 0xa8, 0xa8,
+ 0xa8, 0xa9, 0xa9, 0xa9, 0xab, 0xab, 0xab, 0xac,
+ 0xac, 0xac, 0xad, 0xad, 0xad, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1,
+ 0xb1, 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7,
+ 0xb7, 0xb8, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9,
+ 0xba, 0xba, 0xba, 0xbc, 0xbc, 0xbc, 0xbc, 0xbd,
+ 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf,
+ 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2, 0xc2, 0xc2,
+ 0xc3, 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc6, 0xc7,
+ 0xc7, 0xc7, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca,
+ 0xca, 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc,
+ 0xcc, 0xcd, 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce,
+ 0xce, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0, 0xd0,
+ 0xd0, 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3, 0xd3,
+ 0xd3, 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6,
+ 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8,
+ 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xda, 0xda, 0xda,
+ 0xda, 0xda, 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd,
+ 0xdd, 0xdd, 0xde, 0xde, 0xde, 0xde, 0xdf, 0xdf,
+ 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0, 0xe1,
+ 0xe1, 0xe1, 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2,
+ 0xe3, 0xe3, 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe4,
+ 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6,
+ 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8,
+ 0xe8, 0xe8, 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb,
+ 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec,
+ 0xed, 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee,
+ 0xee, 0xee, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9,
+ 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
+ 0xfc, 0xfc, 0xfc, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd,
+ 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+ {0x03, 0x05, 0x07, 0x09, 0x0a, 0x0c, 0x0d, 0x10,
+ 0x11, 0x12, 0x14, 0x15, 0x17, 0x18, 0x1a, 0x1b,
+ 0x1c, 0x1e, 0x1f, 0x20, 0x22, 0x23, 0x25, 0x26,
+ 0x27, 0x28, 0x29, 0x2b, 0x2c, 0x2c, 0x2d, 0x2f,
+ 0x30, 0x31, 0x33, 0x33, 0x34, 0x35, 0x37, 0x38,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3b, 0x3c, 0x3d, 0x3f,
+ 0x3f, 0x40, 0x42, 0x42, 0x43, 0x44, 0x45, 0x45,
+ 0x47, 0x47, 0x48, 0x49, 0x49, 0x4a, 0x4b, 0x4b,
+ 0x4c, 0x4d, 0x4d, 0x4f, 0x4f, 0x50, 0x52, 0x52,
+ 0x53, 0x53, 0x54, 0x54, 0x55, 0x55, 0x56, 0x58,
+ 0x58, 0x59, 0x59, 0x5a, 0x5a, 0x5b, 0x5b, 0x5c,
+ 0x5c, 0x5e, 0x5e, 0x5f, 0x5f, 0x60, 0x60, 0x61,
+ 0x61, 0x62, 0x62, 0x63, 0x63, 0x65, 0x65, 0x66,
+ 0x66, 0x67, 0x67, 0x67, 0x68, 0x68, 0x69, 0x69,
+ 0x6a, 0x6a, 0x6c, 0x6c, 0x6c, 0x6d, 0x6d, 0x6e,
+ 0x6e, 0x6f, 0x6f, 0x6f, 0x70, 0x70, 0x71, 0x71,
+ 0x71, 0x73, 0x73, 0x74, 0x74, 0x74, 0x75, 0x75,
+ 0x77, 0x77, 0x77, 0x78, 0x78, 0x79, 0x79, 0x79,
+ 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7c, 0x7c,
+ 0x7d, 0x7d, 0x7d, 0x7f, 0x7f, 0x7f, 0x80, 0x80,
+ 0x80, 0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x84,
+ 0x84, 0x84, 0x85, 0x85, 0x85, 0x86, 0x86, 0x86,
+ 0x88, 0x88, 0x88, 0x89, 0x89, 0x89, 0x8a, 0x8a,
+ 0x8a, 0x8b, 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8e,
+ 0x8e, 0x8e, 0x8e, 0x8f, 0x8f, 0x8f, 0x90, 0x90,
+ 0x90, 0x91, 0x91, 0x91, 0x91, 0x92, 0x92, 0x92,
+ 0x93, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x96,
+ 0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x98, 0x98,
+ 0x98, 0x98, 0x99, 0x99, 0x99, 0x9a, 0x9a, 0x9a,
+ 0x9a, 0x9b, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c, 0x9c,
+ 0x9c, 0x9d, 0x9d, 0x9d, 0x9e, 0x9e, 0x9e, 0x9e,
+ 0xa0, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1, 0xa1, 0xa1,
+ 0xa2, 0xa2, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa3,
+ 0xa4, 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5,
+ 0xa6, 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8, 0xa8,
+ 0xa9, 0xa9, 0xa9, 0xa9, 0xa9, 0xab, 0xab, 0xab,
+ 0xab, 0xac, 0xac, 0xac, 0xac, 0xad, 0xad, 0xad,
+ 0xad, 0xad, 0xae, 0xae, 0xae, 0xae, 0xaf, 0xaf,
+ 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb0, 0xb0, 0xb1,
+ 0xb1, 0xb1, 0xb1, 0xb2, 0xb2, 0xb2, 0xb2, 0xb2,
+ 0xb3, 0xb3, 0xb3, 0xb3, 0xb3, 0xb4, 0xb4, 0xb4,
+ 0xb4, 0xb6, 0xb6, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7,
+ 0xb7, 0xb7, 0xb7, 0xb8, 0xb8, 0xb8, 0xb8, 0xb9,
+ 0xb9, 0xb9, 0xb9, 0xb9, 0xba, 0xba, 0xba, 0xba,
+ 0xba, 0xbc, 0xbc, 0xbc, 0xbc, 0xbc, 0xbd, 0xbd,
+ 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbf, 0xbf, 0xbf, 0xbf, 0xbf, 0xc0, 0xc0, 0xc0,
+ 0xc0, 0xc0, 0xc2, 0xc2, 0xc2, 0xc2, 0xc2, 0xc3,
+ 0xc3, 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc4,
+ 0xc4, 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7, 0xc7,
+ 0xc7, 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca,
+ 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb,
+ 0xcb, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd,
+ 0xcd, 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce,
+ 0xce, 0xcf, 0xcf, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0,
+ 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1, 0xd1, 0xd1,
+ 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3, 0xd3, 0xd4,
+ 0xd4, 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6,
+ 0xd6, 0xd6, 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda,
+ 0xda, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0xdd,
+ 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde,
+ 0xde, 0xde, 0xde, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf,
+ 0xdf, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe1,
+ 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3,
+ 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5,
+ 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6,
+ 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7,
+ 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9,
+ 0xe9, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb, 0xeb,
+ 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec,
+ 0xec, 0xed, 0xed, 0xed, 0xed, 0xed, 0xed, 0xee,
+ 0xee, 0xee, 0xee, 0xee, 0xee, 0xef, 0xef, 0xef,
+ 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5,
+ 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9,
+ 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfc, 0xfc, 0xfc, 0xfc,
+ 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
+ 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfe, 0xfe,
+ 0xfe, 0xfe, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+ {0x07, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14,
+ 0x16, 0x17, 0x18, 0x1b, 0x1c, 0x1e, 0x1f, 0x20,
+ 0x23, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2b, 0x2d,
+ 0x2f, 0x30, 0x31, 0x33, 0x34, 0x35, 0x37, 0x38,
+ 0x39, 0x3a, 0x3b, 0x3b, 0x3c, 0x3d, 0x3f, 0x40,
+ 0x42, 0x43, 0x44, 0x44, 0x45, 0x47, 0x48, 0x49,
+ 0x4a, 0x4a, 0x4b, 0x4c, 0x4d, 0x4d, 0x4f, 0x50,
+ 0x52, 0x52, 0x53, 0x54, 0x55, 0x55, 0x56, 0x58,
+ 0x58, 0x59, 0x5a, 0x5b, 0x5b, 0x5c, 0x5e, 0x5e,
+ 0x5f, 0x5f, 0x60, 0x61, 0x61, 0x62, 0x63, 0x63,
+ 0x65, 0x65, 0x66, 0x67, 0x67, 0x68, 0x68, 0x69,
+ 0x6a, 0x6a, 0x6c, 0x6c, 0x6d, 0x6d, 0x6e, 0x6e,
+ 0x6f, 0x70, 0x70, 0x71, 0x71, 0x73, 0x73, 0x74,
+ 0x74, 0x75, 0x75, 0x77, 0x77, 0x78, 0x78, 0x79,
+ 0x79, 0x7a, 0x7a, 0x7b, 0x7b, 0x7c, 0x7c, 0x7d,
+ 0x7d, 0x7f, 0x7f, 0x80, 0x80, 0x81, 0x81, 0x81,
+ 0x82, 0x82, 0x84, 0x84, 0x85, 0x85, 0x86, 0x86,
+ 0x88, 0x88, 0x88, 0x89, 0x89, 0x8a, 0x8a, 0x8b,
+ 0x8b, 0x8b, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e, 0x8f,
+ 0x8f, 0x90, 0x90, 0x90, 0x91, 0x91, 0x92, 0x92,
+ 0x92, 0x93, 0x93, 0x94, 0x94, 0x94, 0x96, 0x96,
+ 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, 0x99, 0x99,
+ 0x99, 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c,
+ 0x9c, 0x9d, 0x9d, 0x9d, 0x9e, 0x9e, 0x9e, 0xa0,
+ 0xa0, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2, 0xa3,
+ 0xa3, 0xa3, 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5,
+ 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa8, 0xa8, 0xa9,
+ 0xa9, 0xa9, 0xab, 0xab, 0xab, 0xac, 0xac, 0xac,
+ 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xaf, 0xaf,
+ 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1, 0xb1,
+ 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb4,
+ 0xb4, 0xb4, 0xb4, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7,
+ 0xb7, 0xb7, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9,
+ 0xb9, 0xba, 0xba, 0xba, 0xbc, 0xbc, 0xbc, 0xbc,
+ 0xbd, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbf,
+ 0xbf, 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2,
+ 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc3, 0xc4,
+ 0xc4, 0xc4, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7, 0xc9, 0xc9,
+ 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xca, 0xcb, 0xcb,
+ 0xcb, 0xcb, 0xcc, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd,
+ 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce, 0xcf,
+ 0xcf, 0xcf, 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1,
+ 0xd1, 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3, 0xd3,
+ 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd6,
+ 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8,
+ 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xd9, 0xda, 0xda,
+ 0xda, 0xda, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0xdd,
+ 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde, 0xde, 0xde,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0,
+ 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe4,
+ 0xe4, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5, 0xe5,
+ 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7,
+ 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9,
+ 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb, 0xeb, 0xeb,
+ 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed, 0xed,
+ 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee, 0xee,
+ 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7,
+ 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9,
+ 0xf9, 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
+ 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfd, 0xfd, 0xfd,
+ 0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}
+ },
+ { /* gamma 4 - from tp6800 + soi763a */
+ {0x11, 0x14, 0x15, 0x17, 0x1a, 0x1b, 0x1e, 0x1f,
+ 0x22, 0x23, 0x25, 0x27, 0x28, 0x2b, 0x2c, 0x2d,
+ 0x2f, 0x31, 0x33, 0x34, 0x35, 0x38, 0x39, 0x3a,
+ 0x3b, 0x3c, 0x3d, 0x40, 0x42, 0x43, 0x44, 0x45,
+ 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4f,
+ 0x50, 0x52, 0x53, 0x53, 0x54, 0x55, 0x56, 0x58,
+ 0x59, 0x5a, 0x5b, 0x5b, 0x5c, 0x5e, 0x5f, 0x60,
+ 0x61, 0x61, 0x62, 0x63, 0x65, 0x65, 0x66, 0x67,
+ 0x68, 0x68, 0x69, 0x6a, 0x6c, 0x6c, 0x6d, 0x6e,
+ 0x6f, 0x6f, 0x70, 0x71, 0x71, 0x73, 0x74, 0x74,
+ 0x75, 0x77, 0x77, 0x78, 0x79, 0x79, 0x7a, 0x7a,
+ 0x7b, 0x7c, 0x7c, 0x7d, 0x7f, 0x7f, 0x80, 0x80,
+ 0x81, 0x81, 0x82, 0x84, 0x84, 0x85, 0x85, 0x86,
+ 0x86, 0x88, 0x89, 0x89, 0x8a, 0x8a, 0x8b, 0x8b,
+ 0x8d, 0x8d, 0x8e, 0x8e, 0x8f, 0x90, 0x90, 0x91,
+ 0x91, 0x92, 0x92, 0x93, 0x93, 0x94, 0x94, 0x96,
+ 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, 0x99, 0x99,
+ 0x9a, 0x9a, 0x9b, 0x9b, 0x9c, 0x9c, 0x9d, 0x9d,
+ 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1, 0xa2,
+ 0xa2, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4, 0xa5, 0xa5,
+ 0xa6, 0xa6, 0xa6, 0xa8, 0xa8, 0xa9, 0xa9, 0xab,
+ 0xab, 0xab, 0xac, 0xac, 0xad, 0xad, 0xad, 0xae,
+ 0xae, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb1, 0xb1,
+ 0xb1, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb4, 0xb4,
+ 0xb4, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7, 0xb8, 0xb8,
+ 0xb8, 0xb9, 0xb9, 0xb9, 0xba, 0xba, 0xba, 0xbc,
+ 0xbc, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbf,
+ 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc2, 0xc2, 0xc2,
+ 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc9,
+ 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb,
+ 0xcb, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xce,
+ 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0,
+ 0xd0, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3,
+ 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd7, 0xd7,
+ 0xd7, 0xd7, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xda, 0xda, 0xda, 0xdb, 0xdb, 0xdb, 0xdb,
+ 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde, 0xde, 0xdf,
+ 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1,
+ 0xe1, 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3,
+ 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5,
+ 0xe5, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7,
+ 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9, 0xe9, 0xe9,
+ 0xe9, 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec,
+ 0xec, 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3, 0xf3, 0xf3,
+ 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5,
+ 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9,
+ 0xf9, 0xf9, 0xfa, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb},
+ {0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x11, 0x14, 0x15,
+ 0x16, 0x17, 0x1a, 0x1b, 0x1c, 0x1e, 0x1f, 0x20,
+ 0x23, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2b, 0x2c,
+ 0x2d, 0x2f, 0x30, 0x31, 0x33, 0x34, 0x34, 0x35,
+ 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3c, 0x3d,
+ 0x3f, 0x40, 0x42, 0x42, 0x43, 0x44, 0x45, 0x45,
+ 0x47, 0x48, 0x49, 0x49, 0x4a, 0x4b, 0x4b, 0x4c,
+ 0x4d, 0x4f, 0x4f, 0x50, 0x52, 0x52, 0x53, 0x54,
+ 0x54, 0x55, 0x55, 0x56, 0x58, 0x58, 0x59, 0x5a,
+ 0x5a, 0x5b, 0x5b, 0x5c, 0x5e, 0x5e, 0x5f, 0x5f,
+ 0x60, 0x60, 0x61, 0x61, 0x62, 0x63, 0x63, 0x65,
+ 0x65, 0x66, 0x66, 0x67, 0x67, 0x68, 0x68, 0x69,
+ 0x69, 0x6a, 0x6a, 0x6c, 0x6c, 0x6d, 0x6d, 0x6e,
+ 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x71, 0x71, 0x73,
+ 0x73, 0x74, 0x74, 0x74, 0x75, 0x75, 0x77, 0x77,
+ 0x78, 0x78, 0x79, 0x79, 0x79, 0x7a, 0x7a, 0x7b,
+ 0x7b, 0x7c, 0x7c, 0x7c, 0x7d, 0x7d, 0x7f, 0x7f,
+ 0x7f, 0x80, 0x80, 0x81, 0x81, 0x81, 0x82, 0x82,
+ 0x84, 0x84, 0x84, 0x85, 0x85, 0x86, 0x86, 0x86,
+ 0x88, 0x88, 0x88, 0x89, 0x89, 0x8a, 0x8a, 0x8a,
+ 0x8b, 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8e, 0x8e,
+ 0x8e, 0x8f, 0x8f, 0x90, 0x90, 0x90, 0x91, 0x91,
+ 0x91, 0x92, 0x92, 0x92, 0x93, 0x93, 0x93, 0x94,
+ 0x94, 0x94, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97,
+ 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x99, 0x9a,
+ 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c, 0x9c,
+ 0x9c, 0x9d, 0x9d, 0x9d, 0x9e, 0x9e, 0x9e, 0xa0,
+ 0xa0, 0xa0, 0xa0, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2,
+ 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4, 0xa4,
+ 0xa5, 0xa5, 0xa5, 0xa5, 0xa6, 0xa6, 0xa6, 0xa6,
+ 0xa8, 0xa8, 0xa8, 0xa9, 0xa9, 0xa9, 0xa9, 0xab,
+ 0xaa, 0xab, 0xab, 0xac, 0xac, 0xac, 0xad, 0xad,
+ 0xad, 0xad, 0xae, 0xae, 0xae, 0xae, 0xaf, 0xaf,
+ 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1,
+ 0xb1, 0xb1, 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3,
+ 0xb3, 0xb3, 0xb4, 0xb4, 0xb4, 0xb4, 0xb6, 0xb6,
+ 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7, 0xb8, 0xb8,
+ 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xb9, 0xba, 0xba,
+ 0xba, 0xba, 0xba, 0xbc, 0xbc, 0xbc, 0xbc, 0xbd,
+ 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbf, 0xbf, 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc7,
+ 0xc7, 0xc7, 0xc7, 0xc7, 0xc9, 0xc9, 0xc9, 0xc9,
+ 0xca, 0xca, 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb,
+ 0xcb, 0xcb, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcd,
+ 0xcd, 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce,
+ 0xcf, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0, 0xd0,
+ 0xd0, 0xd0, 0xd1, 0xd1, 0xd1, 0xd1, 0xd1, 0xd3,
+ 0xd3, 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4, 0xd4,
+ 0xd4, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd7, 0xd7,
+ 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8, 0xd8, 0xd8,
+ 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xd9, 0xda, 0xda,
+ 0xda, 0xda, 0xda, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb,
+ 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde,
+ 0xde, 0xde, 0xde, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf,
+ 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1, 0xe1,
+ 0xe1, 0xe1, 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2,
+ 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe4, 0xe4,
+ 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5, 0xe5, 0xe5,
+ 0xe5, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7, 0xe7,
+ 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8,
+ 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb,
+ 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec,
+ 0xec, 0xec, 0xed, 0xed, 0xed, 0xed, 0xed, 0xed,
+ 0xee, 0xee, 0xee, 0xee, 0xee, 0xef, 0xef, 0xef,
+ 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5,
+ 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8,
+ 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb},
+ {0x0d, 0x10, 0x11, 0x14, 0x15, 0x17, 0x18, 0x1b,
+ 0x1c, 0x1e, 0x20, 0x22, 0x23, 0x26, 0x27, 0x28,
+ 0x29, 0x2b, 0x2d, 0x2f, 0x30, 0x31, 0x33, 0x34,
+ 0x35, 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d,
+ 0x3f, 0x40, 0x42, 0x43, 0x44, 0x45, 0x47, 0x48,
+ 0x49, 0x4a, 0x4b, 0x4b, 0x4c, 0x4d, 0x4f, 0x50,
+ 0x52, 0x52, 0x53, 0x54, 0x55, 0x56, 0x56, 0x58,
+ 0x59, 0x5a, 0x5a, 0x5b, 0x5c, 0x5e, 0x5e, 0x5f,
+ 0x60, 0x60, 0x61, 0x62, 0x62, 0x63, 0x65, 0x65,
+ 0x66, 0x67, 0x67, 0x68, 0x69, 0x69, 0x6a, 0x6c,
+ 0x6c, 0x6d, 0x6d, 0x6e, 0x6f, 0x6f, 0x70, 0x70,
+ 0x71, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75, 0x77,
+ 0x78, 0x78, 0x79, 0x79, 0x7a, 0x7a, 0x7b, 0x7b,
+ 0x7c, 0x7c, 0x7d, 0x7d, 0x7f, 0x7f, 0x80, 0x80,
+ 0x81, 0x81, 0x82, 0x82, 0x84, 0x84, 0x85, 0x85,
+ 0x86, 0x86, 0x88, 0x88, 0x89, 0x89, 0x8a, 0x8a,
+ 0x8b, 0x8b, 0x8d, 0x8d, 0x8d, 0x8e, 0x8e, 0x8f,
+ 0x8f, 0x90, 0x90, 0x91, 0x91, 0x91, 0x92, 0x92,
+ 0x93, 0x93, 0x94, 0x94, 0x94, 0x96, 0x96, 0x97,
+ 0x97, 0x98, 0x98, 0x98, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9b, 0x9b, 0x9c, 0x9c, 0x9c, 0x9d, 0x9d,
+ 0x9d, 0x9e, 0x9e, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1,
+ 0xa1, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4,
+ 0xa4, 0xa5, 0xa5, 0xa5, 0xa6, 0xa6, 0xa8, 0xa8,
+ 0xa8, 0xa9, 0xa9, 0xa9, 0xab, 0xab, 0xab, 0xac,
+ 0xac, 0xac, 0xad, 0xad, 0xad, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1,
+ 0xb1, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb4,
+ 0xb4, 0xb4, 0xb6, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7,
+ 0xb7, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xba,
+ 0xba, 0xba, 0xba, 0xbc, 0xbc, 0xbc, 0xbd, 0xbd,
+ 0xbd, 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf,
+ 0xc0, 0xc0, 0xc0, 0xc0, 0xc2, 0xc2, 0xc2, 0xc3,
+ 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc6, 0xc7, 0xc7,
+ 0xc7, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca,
+ 0xca, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc, 0xcc, 0xcc,
+ 0xcd, 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce,
+ 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0, 0xd0, 0xd0,
+ 0xd1, 0xd1, 0xd1, 0xd1, 0xd3, 0xd3, 0xd3, 0xd3,
+ 0xd4, 0xd4, 0xd4, 0xd4, 0xd6, 0xd6, 0xd6, 0xd6,
+ 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8, 0xd8,
+ 0xd9, 0xd9, 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda,
+ 0xdb, 0xdb, 0xdb, 0xdb, 0xdd, 0xdd, 0xdd, 0xdd,
+ 0xdd, 0xde, 0xde, 0xde, 0xde, 0xdf, 0xdf, 0xdf,
+ 0xdf, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1,
+ 0xe1, 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3,
+ 0xe3, 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5,
+ 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6, 0xe6,
+ 0xe7, 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8,
+ 0xe8, 0xe9, 0xe9, 0xe9, 0xe9, 0xe9, 0xeb, 0xeb,
+ 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed,
+ 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee,
+ 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf3,
+ 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4,
+ 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6,
+ 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8,
+ 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9,
+ 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb}
+ },
+ { /* gamma 5 */
+ {0x16, 0x18, 0x19, 0x1b, 0x1d, 0x1e, 0x20, 0x21,
+ 0x23, 0x24, 0x25, 0x27, 0x28, 0x2a, 0x2b, 0x2c,
+ 0x2d, 0x2f, 0x30, 0x31, 0x32, 0x34, 0x35, 0x36,
+ 0x37, 0x38, 0x39, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x49, 0x4a, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e,
+ 0x4f, 0x50, 0x51, 0x51, 0x52, 0x53, 0x54, 0x55,
+ 0x56, 0x56, 0x57, 0x58, 0x59, 0x59, 0x5a, 0x5b,
+ 0x5c, 0x5c, 0x5d, 0x5e, 0x5f, 0x5f, 0x60, 0x61,
+ 0x62, 0x62, 0x63, 0x64, 0x64, 0x65, 0x66, 0x66,
+ 0x67, 0x68, 0x68, 0x69, 0x6a, 0x6a, 0x6b, 0x6b,
+ 0x6c, 0x6d, 0x6d, 0x6e, 0x6f, 0x6f, 0x70, 0x70,
+ 0x71, 0x71, 0x72, 0x73, 0x73, 0x74, 0x74, 0x75,
+ 0x75, 0x76, 0x77, 0x77, 0x78, 0x78, 0x79, 0x79,
+ 0x7a, 0x7a, 0x7b, 0x7b, 0x7c, 0x7d, 0x7d, 0x7e,
+ 0x7e, 0x7f, 0x7f, 0x80, 0x80, 0x81, 0x81, 0x82,
+ 0x82, 0x83, 0x83, 0x84, 0x84, 0x84, 0x85, 0x85,
+ 0x86, 0x86, 0x87, 0x87, 0x88, 0x88, 0x89, 0x89,
+ 0x8a, 0x8a, 0x8b, 0x8b, 0x8b, 0x8c, 0x8c, 0x8d,
+ 0x8d, 0x8e, 0x8e, 0x8e, 0x8f, 0x8f, 0x90, 0x90,
+ 0x91, 0x91, 0x91, 0x92, 0x92, 0x93, 0x93, 0x94,
+ 0x94, 0x94, 0x95, 0x95, 0x96, 0x96, 0x96, 0x97,
+ 0x97, 0x98, 0x98, 0x98, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c, 0x9d, 0x9d,
+ 0x9d, 0x9e, 0x9e, 0x9e, 0x9f, 0x9f, 0xa0, 0xa0,
+ 0xa0, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2, 0xa3,
+ 0xa3, 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa6,
+ 0xa6, 0xa6, 0xa7, 0xa7, 0xa7, 0xa8, 0xa8, 0xa8,
+ 0xa9, 0xa9, 0xa9, 0xaa, 0xaa, 0xaa, 0xab, 0xab,
+ 0xab, 0xac, 0xac, 0xac, 0xad, 0xad, 0xad, 0xae,
+ 0xae, 0xae, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0,
+ 0xb0, 0xb1, 0xb1, 0xb1, 0xb2, 0xb2, 0xb2, 0xb3,
+ 0xb3, 0xb3, 0xb4, 0xb4, 0xb4, 0xb4, 0xb5, 0xb5,
+ 0xb5, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7,
+ 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xba, 0xba,
+ 0xba, 0xba, 0xbb, 0xbb, 0xbb, 0xbc, 0xbc, 0xbc,
+ 0xbc, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbf, 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc1,
+ 0xc1, 0xc1, 0xc1, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3,
+ 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7,
+ 0xc7, 0xc8, 0xc8, 0xc8, 0xc8, 0xc9, 0xc9, 0xc9,
+ 0xc9, 0xca, 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb,
+ 0xcb, 0xcc, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd, 0xcd,
+ 0xcd, 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf,
+ 0xcf, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1, 0xd1,
+ 0xd1, 0xd2, 0xd2, 0xd2, 0xd2, 0xd3, 0xd3, 0xd3,
+ 0xd3, 0xd4, 0xd4, 0xd4, 0xd4, 0xd5, 0xd5, 0xd5,
+ 0xd5, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd7, 0xd7,
+ 0xd7, 0xd7, 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9,
+ 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdc, 0xdc, 0xdc, 0xdc, 0xdd,
+ 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde, 0xde,
+ 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0,
+ 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe4,
+ 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5, 0xe5, 0xe5,
+ 0xe6, 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7,
+ 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9, 0xe9,
+ 0xe9, 0xe9, 0xea, 0xea, 0xea, 0xea, 0xea, 0xeb,
+ 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec,
+ 0xed, 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee,
+ 0xee, 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1,
+ 0xf2, 0xf2, 0xf2, 0xf2, 0xf2, 0xf3, 0xf3, 0xf3,
+ 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5,
+ 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfd, 0xfd,
+ 0xfd, 0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+ {0x0f, 0x11, 0x12, 0x14, 0x15, 0x16, 0x18, 0x19,
+ 0x1a, 0x1b, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22,
+ 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
+ 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31, 0x31, 0x32,
+ 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x38, 0x39,
+ 0x3a, 0x3b, 0x3c, 0x3c, 0x3d, 0x3e, 0x3f, 0x3f,
+ 0x40, 0x41, 0x42, 0x42, 0x43, 0x44, 0x44, 0x45,
+ 0x46, 0x47, 0x47, 0x48, 0x49, 0x49, 0x4a, 0x4b,
+ 0x4b, 0x4c, 0x4c, 0x4d, 0x4e, 0x4e, 0x4f, 0x50,
+ 0x50, 0x51, 0x51, 0x52, 0x53, 0x53, 0x54, 0x54,
+ 0x55, 0x55, 0x56, 0x56, 0x57, 0x58, 0x58, 0x59,
+ 0x59, 0x5a, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c, 0x5d,
+ 0x5d, 0x5e, 0x5e, 0x5f, 0x5f, 0x60, 0x60, 0x61,
+ 0x61, 0x62, 0x62, 0x63, 0x63, 0x64, 0x64, 0x65,
+ 0x65, 0x66, 0x66, 0x66, 0x67, 0x67, 0x68, 0x68,
+ 0x69, 0x69, 0x6a, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c,
+ 0x6c, 0x6d, 0x6d, 0x6d, 0x6e, 0x6e, 0x6f, 0x6f,
+ 0x6f, 0x70, 0x70, 0x71, 0x71, 0x71, 0x72, 0x72,
+ 0x73, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75, 0x75,
+ 0x76, 0x76, 0x76, 0x77, 0x77, 0x78, 0x78, 0x78,
+ 0x79, 0x79, 0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b,
+ 0x7b, 0x7c, 0x7c, 0x7d, 0x7d, 0x7d, 0x7e, 0x7e,
+ 0x7e, 0x7f, 0x7f, 0x7f, 0x80, 0x80, 0x80, 0x81,
+ 0x81, 0x81, 0x82, 0x82, 0x82, 0x83, 0x83, 0x83,
+ 0x84, 0x84, 0x84, 0x84, 0x85, 0x85, 0x85, 0x86,
+ 0x86, 0x86, 0x87, 0x87, 0x87, 0x88, 0x88, 0x88,
+ 0x88, 0x89, 0x89, 0x89, 0x8a, 0x8a, 0x8a, 0x8b,
+ 0x8b, 0x8b, 0x8b, 0x8c, 0x8c, 0x8c, 0x8d, 0x8d,
+ 0x8d, 0x8e, 0x8e, 0x8e, 0x8e, 0x8f, 0x8f, 0x8f,
+ 0x90, 0x90, 0x90, 0x90, 0x91, 0x91, 0x91, 0x91,
+ 0x92, 0x92, 0x92, 0x93, 0x93, 0x93, 0x93, 0x94,
+ 0x94, 0x94, 0x94, 0x95, 0x95, 0x95, 0x96, 0x96,
+ 0x96, 0x96, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98,
+ 0x98, 0x98, 0x99, 0x99, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c,
+ 0x9c, 0x9c, 0x9d, 0x9d, 0x9d, 0x9d, 0x9e, 0x9e,
+ 0x9e, 0x9e, 0x9f, 0x9f, 0x9f, 0x9f, 0xa0, 0xa0,
+ 0xa0, 0xa0, 0xa1, 0xa1, 0xa1, 0xa1, 0xa2, 0xa2,
+ 0xa2, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa3, 0xa4,
+ 0xa4, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5,
+ 0xa6, 0xa6, 0xa6, 0xa6, 0xa7, 0xa7, 0xa7, 0xa7,
+ 0xa8, 0xa8, 0xa8, 0xa8, 0xa8, 0xa9, 0xa9, 0xa9,
+ 0xa9, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xab, 0xab,
+ 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xac, 0xad,
+ 0xad, 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xae,
+ 0xaf, 0xaf, 0xaf, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0,
+ 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1, 0xb1, 0xb2,
+ 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb4, 0xb5, 0xb5, 0xb5,
+ 0xb5, 0xb5, 0xb6, 0xb6, 0xb6, 0xb6, 0xb6, 0xb7,
+ 0xb7, 0xb7, 0xb7, 0xb7, 0xb8, 0xb8, 0xb8, 0xb8,
+ 0xb8, 0xb9, 0xb9, 0xb9, 0xb9, 0xb9, 0xba, 0xba,
+ 0xba, 0xba, 0xba, 0xbb, 0xbb, 0xbb, 0xbb, 0xbb,
+ 0xbb, 0xbc, 0xbc, 0xbc, 0xbc, 0xbc, 0xbd, 0xbd,
+ 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbf, 0xbf, 0xbf, 0xbf, 0xbf, 0xc0, 0xc0, 0xc0,
+ 0xc0, 0xc0, 0xc0, 0xc1, 0xc1, 0xc1, 0xc1, 0xc1,
+ 0xc2, 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3,
+ 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc4,
+ 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc5, 0xc6, 0xc6,
+ 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc7, 0xc7,
+ 0xc7, 0xc8, 0xc8, 0xc8, 0xc8, 0xc8, 0xc9, 0xc9,
+ 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xca,
+ 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc,
+ 0xcc, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xcd,
+ 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce,
+ 0xcf, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0, 0xd0,
+ 0xd0, 0xd0, 0xd0, 0xd1, 0xd1, 0xd1, 0xd1, 0xd1,
+ 0xd1, 0xd2, 0xd2, 0xd2, 0xd2, 0xd2, 0xd2, 0xd3,
+ 0xd3, 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4, 0xd4,
+ 0xd4, 0xd4, 0xd5, 0xd5, 0xd5, 0xd5, 0xd5, 0xd5,
+ 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd6, 0xd7, 0xd7,
+ 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8, 0xd8, 0xd8,
+ 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xd9, 0xd9, 0xda,
+ 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb, 0xdb, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdc, 0xdc, 0xdc, 0xdc, 0xdc,
+ 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde,
+ 0xde, 0xde, 0xde, 0xde, 0xdf, 0xdf, 0xdf, 0xdf,
+ 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0,
+ 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2,
+ 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3,
+ 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5,
+ 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6,
+ 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7,
+ 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9, 0xe9,
+ 0xe9, 0xe9, 0xe9, 0xe9, 0xea, 0xea, 0xea, 0xea,
+ 0xea, 0xea, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb,
+ 0xec, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed, 0xed,
+ 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee, 0xee,
+ 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1,
+ 0xf1, 0xf1, 0xf2, 0xf2, 0xf2, 0xf2, 0xf2, 0xf2,
+ 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4,
+ 0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5,
+ 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7, 0xf7,
+ 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8,
+ 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa, 0xfa,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfd, 0xfd,
+ 0xfd, 0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe,
+ 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+ {0x13, 0x15, 0x16, 0x18, 0x19, 0x1b, 0x1c, 0x1e,
+ 0x1f, 0x20, 0x22, 0x23, 0x24, 0x26, 0x27, 0x28,
+ 0x29, 0x2a, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31,
+ 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39,
+ 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41,
+ 0x42, 0x43, 0x44, 0x44, 0x45, 0x46, 0x47, 0x48,
+ 0x49, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4d, 0x4e,
+ 0x4f, 0x50, 0x50, 0x51, 0x52, 0x53, 0x53, 0x54,
+ 0x55, 0x55, 0x56, 0x57, 0x57, 0x58, 0x59, 0x59,
+ 0x5a, 0x5b, 0x5b, 0x5c, 0x5d, 0x5d, 0x5e, 0x5f,
+ 0x5f, 0x60, 0x60, 0x61, 0x62, 0x62, 0x63, 0x63,
+ 0x64, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x68,
+ 0x69, 0x69, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c, 0x6c,
+ 0x6d, 0x6d, 0x6e, 0x6e, 0x6f, 0x6f, 0x70, 0x70,
+ 0x71, 0x71, 0x72, 0x72, 0x73, 0x73, 0x74, 0x74,
+ 0x75, 0x75, 0x76, 0x76, 0x77, 0x77, 0x78, 0x78,
+ 0x79, 0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7c,
+ 0x7c, 0x7d, 0x7d, 0x7e, 0x7e, 0x7e, 0x7f, 0x7f,
+ 0x80, 0x80, 0x81, 0x81, 0x81, 0x82, 0x82, 0x83,
+ 0x83, 0x84, 0x84, 0x84, 0x85, 0x85, 0x86, 0x86,
+ 0x86, 0x87, 0x87, 0x88, 0x88, 0x88, 0x89, 0x89,
+ 0x89, 0x8a, 0x8a, 0x8b, 0x8b, 0x8b, 0x8c, 0x8c,
+ 0x8c, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e, 0x8f, 0x8f,
+ 0x8f, 0x90, 0x90, 0x90, 0x91, 0x91, 0x92, 0x92,
+ 0x92, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x95,
+ 0x95, 0x95, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97,
+ 0x98, 0x98, 0x98, 0x99, 0x99, 0x99, 0x9a, 0x9a,
+ 0x9a, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c, 0x9c, 0x9d,
+ 0x9d, 0x9d, 0x9e, 0x9e, 0x9e, 0x9e, 0x9f, 0x9f,
+ 0x9f, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1, 0xa1, 0xa2,
+ 0xa2, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4,
+ 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa6, 0xa6, 0xa6,
+ 0xa7, 0xa7, 0xa7, 0xa7, 0xa8, 0xa8, 0xa8, 0xa9,
+ 0xa9, 0xa9, 0xa9, 0xaa, 0xaa, 0xaa, 0xab, 0xab,
+ 0xab, 0xab, 0xac, 0xac, 0xac, 0xac, 0xad, 0xad,
+ 0xad, 0xae, 0xae, 0xae, 0xae, 0xaf, 0xaf, 0xaf,
+ 0xaf, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb1,
+ 0xb2, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb3, 0xb3,
+ 0xb4, 0xb4, 0xb4, 0xb4, 0xb5, 0xb5, 0xb5, 0xb5,
+ 0xb6, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb7,
+ 0xb8, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xb9, 0xb9,
+ 0xba, 0xba, 0xba, 0xba, 0xbb, 0xbb, 0xbb, 0xbb,
+ 0xbc, 0xbc, 0xbc, 0xbc, 0xbd, 0xbd, 0xbd, 0xbd,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf, 0xbf,
+ 0xbf, 0xc0, 0xc0, 0xc0, 0xc0, 0xc1, 0xc1, 0xc1,
+ 0xc1, 0xc2, 0xc2, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3,
+ 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5,
+ 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc6, 0xc7,
+ 0xc7, 0xc7, 0xc7, 0xc7, 0xc8, 0xc8, 0xc8, 0xc8,
+ 0xc9, 0xc9, 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca,
+ 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc,
+ 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xcd, 0xcd, 0xce,
+ 0xce, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf,
+ 0xd0, 0xd0, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1, 0xd1,
+ 0xd1, 0xd1, 0xd2, 0xd2, 0xd2, 0xd2, 0xd2, 0xd3,
+ 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4, 0xd4, 0xd4,
+ 0xd5, 0xd5, 0xd5, 0xd5, 0xd5, 0xd6, 0xd6, 0xd6,
+ 0xd6, 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8,
+ 0xd8, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9, 0xd9,
+ 0xd9, 0xda, 0xda, 0xda, 0xda, 0xda, 0xdb, 0xdb,
+ 0xdb, 0xdb, 0xdb, 0xdc, 0xdc, 0xdc, 0xdc, 0xdc,
+ 0xdd, 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde,
+ 0xde, 0xde, 0xdf, 0xdf, 0xdf, 0xdf, 0xdf, 0xe0,
+ 0xe0, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1, 0xe1, 0xe1,
+ 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3,
+ 0xe3, 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4,
+ 0xe4, 0xe5, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6,
+ 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe7,
+ 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe9, 0xe9, 0xe9,
+ 0xe9, 0xe9, 0xe9, 0xea, 0xea, 0xea, 0xea, 0xea,
+ 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec,
+ 0xec, 0xec, 0xed, 0xed, 0xed, 0xed, 0xed, 0xed,
+ 0xee, 0xee, 0xee, 0xee, 0xee, 0xef, 0xef, 0xef,
+ 0xef, 0xef, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf2, 0xf2, 0xf2,
+ 0xf2, 0xf2, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3,
+ 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5,
+ 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6,
+ 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8,
+ 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9,
+ 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb,
+ 0xfb, 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
+ 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfe, 0xfe, 0xfe,
+ 0xfe, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+ },
+ };
+
+ reg_w(gspca_dev, TP6800_R21_ENDP_1_CTL, 0x00);
+ if (sd->bridge == BRIDGE_TP6810)
+ reg_w(gspca_dev, 0x02, 0x28);
+/* msleep(50); */
+ gamma = sd->ctrls[GAMMA].val;
+ bulk_w(gspca_dev, 0x00, gamma_tb[gamma][0], 1024);
+ bulk_w(gspca_dev, 0x01, gamma_tb[gamma][1], 1024);
+ bulk_w(gspca_dev, 0x02, gamma_tb[gamma][2], 1024);
+ if (sd->bridge == BRIDGE_TP6810) {
+ int i;
+
+ reg_w(gspca_dev, 0x02, 0x2b);
+ reg_w(gspca_dev, 0x02, 0x28);
+ for (i = 0; i < 6; i++)
+ reg_w(gspca_dev, TP6800_R55_GAMMA_R,
+ gamma_tb[gamma][0][i]);
+ reg_w(gspca_dev, 0x02, 0x2b);
+ reg_w(gspca_dev, 0x02, 0x28);
+ for (i = 0; i < 6; i++)
+ reg_w(gspca_dev, TP6800_R56_GAMMA_G,
+ gamma_tb[gamma][1][i]);
+ reg_w(gspca_dev, 0x02, 0x2b);
+ reg_w(gspca_dev, 0x02, 0x28);
+ for (i = 0; i < 6; i++)
+ reg_w(gspca_dev, TP6800_R57_GAMMA_B,
+ gamma_tb[gamma][2][i]);
+ reg_w(gspca_dev, 0x02, 0x28);
+ }
+ reg_w(gspca_dev, TP6800_R21_ENDP_1_CTL, 0x03);
+/* msleep(50); */
+}
+
+static void setsharpness(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ if (sd->bridge == BRIDGE_TP6800) {
+ val = sd->ctrls[SHARPNESS].val
+ | 0x08; /* grid compensation enable */
+ if (gspca_dev->width == 640)
+ reg_w(gspca_dev, TP6800_R78_FORMAT, 0x00); /* vga */
+ else
+ val |= 0x04; /* scaling down enable */
+ reg_w(gspca_dev, TP6800_R5D_DEMOSAIC_CFG, val);
+ } else {
+ val = (sd->ctrls[SHARPNESS].val << 5) | 0x08;
+ reg_w(gspca_dev, 0x59, val);
+ }
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN))
+ return;
+ if (sd->ctrls[AUTOGAIN].val) {
+ sd->ag_cnt = AG_CNT_START;
+ gspca_dev->ctrl_inac |= (1 << EXPOSURE) | (1 << GAIN);
+ } else {
+ sd->ag_cnt = -1;
+ gspca_dev->ctrl_inac &= ~((1 << EXPOSURE) | (1 << GAIN));
+ }
+}
+
+/* set the resolution for sensor cx0342 */
+static void set_resolution(struct gspca_dev *gspca_dev)
+{
+ reg_w(gspca_dev, TP6800_R21_ENDP_1_CTL, 0x00);
+ if (gspca_dev->width == 320) {
+ reg_w(gspca_dev, TP6800_R3F_FRAME_RATE, 0x06);
+ msleep(100);
+ i2c_w(gspca_dev, CX0342_AUTO_ADC_CALIB, 0x01);
+ msleep(100);
+ reg_w(gspca_dev, TP6800_R21_ENDP_1_CTL, 0x03);
+ reg_w(gspca_dev, TP6800_R78_FORMAT, 0x01); /* qvga */
+ reg_w(gspca_dev, TP6800_R5D_DEMOSAIC_CFG, 0x0d);
+ i2c_w(gspca_dev, CX0342_EXPO_LINE_L, 0x37);
+ i2c_w(gspca_dev, CX0342_EXPO_LINE_H, 0x01);
+ } else {
+ reg_w(gspca_dev, TP6800_R3F_FRAME_RATE, 0x05);
+ msleep(100);
+ i2c_w(gspca_dev, CX0342_AUTO_ADC_CALIB, 0x01);
+ msleep(100);
+ reg_w(gspca_dev, TP6800_R21_ENDP_1_CTL, 0x03);
+ reg_w(gspca_dev, TP6800_R78_FORMAT, 0x00); /* vga */
+ reg_w(gspca_dev, TP6800_R5D_DEMOSAIC_CFG, 0x09);
+ i2c_w(gspca_dev, CX0342_EXPO_LINE_L, 0xcf);
+ i2c_w(gspca_dev, CX0342_EXPO_LINE_H, 0x00);
+ }
+ i2c_w(gspca_dev, CX0342_SYS_CTRL_0, 0x01);
+ bulk_w(gspca_dev, 0x03, color_gain[SENSOR_CX0342],
+ ARRAY_SIZE(color_gain[0]));
+ setgamma(gspca_dev);
+ setquality(gspca_dev);
+}
+
+/* convert the frame rate to a tp68x0 value */
+static int get_fr_idx(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+
+ if (sd->bridge == BRIDGE_TP6800) {
+ for (i = 0; i < ARRAY_SIZE(rates) - 1; i++) {
+ if (sd->framerate >= rates[i])
+ break;
+ }
+ i = 6 - i; /* 1 = 5fps .. 6 = 30fps */
+
+ /* 640x480 * 30 fps does not work */
+ if (i == 6 /* if 30 fps */
+ && gspca_dev->width == 640)
+ i = 0x86; /* 15 fps */
+ } else {
+ for (i = 0; i < ARRAY_SIZE(rates_6810) - 1; i++) {
+ if (sd->framerate >= rates_6810[i])
+ break;
+ }
+ i = 7 - i; /* 3 = 5fps .. 7 = 30fps */
+
+ /* 640x480 * 30 fps does not work */
+ if (i == 7 /* if 30 fps */
+ && gspca_dev->width == 640)
+ i = 6; /* 15 fps */
+ i |= 0x80; /* clock * 1 */
+ }
+ return i;
+}
+
+static void setframerate(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 fr_idx;
+
+ fr_idx = get_fr_idx(gspca_dev);
+
+ if (sd->bridge == BRIDGE_TP6810) {
+ reg_r(gspca_dev, 0x7b);
+ reg_w(gspca_dev, 0x7b,
+ sd->sensor == SENSOR_CX0342 ? 0x10 : 0x90);
+ if (sd->ctrls[EXPOSURE].val >= 128)
+ fr_idx = 0xf0; /* lower frame rate */
+ }
+
+ reg_w(gspca_dev, TP6800_R3F_FRAME_RATE, fr_idx);
+
+ if (sd->sensor == SENSOR_CX0342)
+ i2c_w(gspca_dev, CX0342_AUTO_ADC_CALIB, 0x01);
+}
+
+static void setrgain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int rgain;
+
+ rgain = sd->ctrls[RGAIN].val;
+ i2c_w(gspca_dev, CX0342_RAW_RGAIN_H, rgain >> 8);
+ i2c_w(gspca_dev, CX0342_RAW_RGAIN_L, rgain);
+ i2c_w(gspca_dev, CX0342_SYS_CTRL_0, 0x80);
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_CX0342) {
+ sd->ctrls[BGAIN].val = sd->ctrls[BGAIN].val
+ * val / sd->ctrls[GAIN].val;
+ if (sd->ctrls[BGAIN].val > 4095)
+ sd->ctrls[BGAIN].val = 4095;
+ sd->ctrls[RGAIN].val = sd->ctrls[RGAIN].val
+ * val / sd->ctrls[GAIN].val;
+ if (sd->ctrls[RGAIN].val > 4095)
+ sd->ctrls[RGAIN].val = 4095;
+ }
+ sd->ctrls[GAIN].val = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return gspca_dev->usb_err;
+}
+
+static void setbgain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int bgain;
+
+ bgain = sd->ctrls[BGAIN].val;
+ i2c_w(gspca_dev, CX0342_RAW_BGAIN_H, bgain >> 8);
+ i2c_w(gspca_dev, CX0342_RAW_BGAIN_L, bgain);
+ i2c_w(gspca_dev, CX0342_SYS_CTRL_0, 0x80);
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->bridge = id->driver_info;
+
+ gspca_dev->cam.cam_mode = vga_mode;
+ gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode);
+ gspca_dev->cam.mode_framerates = sd->bridge == BRIDGE_TP6800 ?
+ framerates : framerates_6810;
+
+ sd->framerate = 30; /* default: 30 fps */
+ gspca_dev->cam.ctrls = sd->ctrls;
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ static const struct cmd tp6800_preinit[] = {
+ {TP6800_R10_SIF_TYPE, 0x01}, /* sif */
+ {TP6800_R11_SIF_CONTROL, 0x01},
+ {TP6800_R15_GPIO_PU, 0x9f},
+ {TP6800_R16_GPIO_PD, 0x9f},
+ {TP6800_R17_GPIO_IO, 0x80},
+ {TP6800_R18_GPIO_DATA, 0x40}, /* LED off */
+ };
+ static const struct cmd tp6810_preinit[] = {
+ {TP6800_R2F_TIMING_CFG, 0x2f},
+ {TP6800_R15_GPIO_PU, 0x6f},
+ {TP6800_R16_GPIO_PD, 0x40},
+ {TP6800_R17_GPIO_IO, 0x9f},
+ {TP6800_R18_GPIO_DATA, 0xc1}, /* LED off */
+ };
+
+ if (sd->bridge == BRIDGE_TP6800)
+ reg_w_buf(gspca_dev, tp6800_preinit,
+ ARRAY_SIZE(tp6800_preinit));
+ else
+ reg_w_buf(gspca_dev, tp6810_preinit,
+ ARRAY_SIZE(tp6810_preinit));
+ msleep(15);
+ reg_r(gspca_dev, TP6800_R18_GPIO_DATA);
+ PDEBUG(D_PROBE, "gpio: %02x", gspca_dev->usb_buf[0]);
+/* values:
+ * 0x80: snapshot button
+ * 0x40: LED
+ * 0x20: (bridge / sensor) reset for tp6810 ?
+ * 0x07: sensor type ?
+ */
+
+ /* guess the sensor type */
+ if (force_sensor >= 0) {
+ sd->sensor = force_sensor;
+ } else {
+ if (sd->bridge == BRIDGE_TP6800) {
+/*fixme: not sure this is working*/
+ switch (gspca_dev->usb_buf[0] & 0x07) {
+ case 0:
+ sd->sensor = SENSOR_SOI763A;
+ break;
+ case 1:
+ sd->sensor = SENSOR_CX0342;
+ break;
+ }
+ } else {
+ int sensor;
+
+ sensor = probe_6810(gspca_dev);
+ if (sensor < 0) {
+ pr_warn("Unknown sensor %d - forced to soi763a\n",
+ -sensor);
+ sensor = SENSOR_SOI763A;
+ }
+ sd->sensor = sensor;
+ }
+ }
+ if (sd->sensor == SENSOR_SOI763A) {
+ pr_info("Sensor soi763a\n");
+ sd->ctrls[GAMMA].def = sd->bridge == BRIDGE_TP6800 ? 0 : 1;
+ sd->ctrls[GAIN].max = 15;
+ sd->ctrls[GAIN].def = 3;
+ gspca_dev->ctrl_dis = (1 << RGAIN) | (1 << BGAIN);
+ if (sd->bridge == BRIDGE_TP6810) {
+ soi763a_6810_init(gspca_dev);
+#if AUTOGAIN_DEF
+ gspca_dev->ctrl_inac |= (1 << EXPOSURE) | (1 << GAIN);
+#endif
+ } else {
+ gspca_dev->ctrl_dis |= (1 << AUTOGAIN);
+ }
+ } else {
+ pr_info("Sensor cx0342\n");
+ if (sd->bridge == BRIDGE_TP6810) {
+ cx0342_6810_init(gspca_dev);
+#if AUTOGAIN_DEF
+ gspca_dev->ctrl_inac |= (1 << EXPOSURE) | (1 << GAIN);
+#endif
+ } else {
+ gspca_dev->ctrl_dis |= (1 << AUTOGAIN);
+ }
+ }
+
+ if (sd->bridge == BRIDGE_TP6810)
+ sd->ctrls[QUALITY].def = 0; /* auto quality */
+ set_dqt(gspca_dev, 0);
+ return 0;
+}
+
+/* This function is called before choosing the alt setting */
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ static const struct cmd cx_sensor_init[] = {
+ {CX0342_AUTO_ADC_CALIB, 0x81},
+ {CX0342_EXPO_LINE_L, 0x37},
+ {CX0342_EXPO_LINE_H, 0x01},
+ {CX0342_RAW_GRGAIN_L, 0x00},
+ {CX0342_RAW_GBGAIN_L, 0x00},
+ {CX0342_RAW_RGAIN_L, 0x00},
+ {CX0342_RAW_BGAIN_L, 0x00},
+ {CX0342_SYS_CTRL_0, 0x81},
+ };
+ static const struct cmd cx_bridge_init[] = {
+ {0x4d, 0x00},
+ {0x4c, 0xff},
+ {0x4e, 0xff},
+ {0x4f, 0x00},
+ };
+ static const struct cmd ov_sensor_init[] = {
+ {0x10, 0x75}, /* exposure */
+ {0x76, 0x03},
+ {0x00, 0x00}, /* gain */
+ };
+ static const struct cmd ov_bridge_init[] = {
+ {0x7b, 0x90},
+ {TP6800_R3F_FRAME_RATE, 0x87},
+ };
+
+ if (sd->bridge == BRIDGE_TP6800)
+ return 0;
+ if (sd->sensor == SENSOR_CX0342) {
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x20);
+ reg_w(gspca_dev, TP6800_R3F_FRAME_RATE, 0x87);
+ i2c_w_buf(gspca_dev, cx_sensor_init,
+ ARRAY_SIZE(cx_sensor_init));
+ reg_w_buf(gspca_dev, cx_bridge_init,
+ ARRAY_SIZE(cx_bridge_init));
+ bulk_w(gspca_dev, 0x03, color_null, sizeof color_null);
+ reg_w(gspca_dev, 0x59, 0x40);
+ } else {
+ reg_w(gspca_dev, TP6800_R12_SIF_ADDR_S, 0x21);
+ i2c_w_buf(gspca_dev, ov_sensor_init,
+ ARRAY_SIZE(ov_sensor_init));
+ reg_r(gspca_dev, 0x7b);
+ reg_w_buf(gspca_dev, ov_bridge_init,
+ ARRAY_SIZE(ov_bridge_init));
+ }
+ reg_w(gspca_dev, TP6800_R78_FORMAT,
+ gspca_dev->curr_mode ? 0x00 : 0x01);
+ return gspca_dev->usb_err;
+}
+
+static void set_led(struct gspca_dev *gspca_dev, int on)
+{
+ u8 data;
+
+ reg_r(gspca_dev, TP6800_R18_GPIO_DATA);
+ data = gspca_dev->usb_buf[0];
+ if (on)
+ data &= ~0x40;
+ else
+ data |= 0x40;
+ reg_w(gspca_dev, TP6800_R18_GPIO_DATA, data);
+}
+
+static void cx0342_6800_start(struct gspca_dev *gspca_dev)
+{
+ static const struct cmd reg_init[] = {
+/*fixme: is this usefull?*/
+ {TP6800_R17_GPIO_IO, 0x9f},
+ {TP6800_R16_GPIO_PD, 0x40},
+ {TP6800_R10_SIF_TYPE, 0x00}, /* i2c 8 bits */
+ {TP6800_R50, 0x00},
+ {TP6800_R51, 0x00},
+ {TP6800_R52, 0xff},
+ {TP6800_R53, 0x03},
+ {TP6800_R54_DARK_CFG, 0x07},
+ {TP6800_R5C_EDGE_THRLD, 0x40},
+ {TP6800_R7A_BLK_THRLD, 0x40},
+ {TP6800_R2F_TIMING_CFG, 0x17},
+ {TP6800_R30_SENSOR_CFG, 0x18}, /* G1B..RG0 */
+ {TP6800_R37_FRONT_DARK_ST, 0x00},
+ {TP6800_R38_FRONT_DARK_END, 0x00},
+ {TP6800_R39_REAR_DARK_ST_L, 0x00},
+ {TP6800_R3A_REAR_DARK_ST_H, 0x00},
+ {TP6800_R3B_REAR_DARK_END_L, 0x00},
+ {TP6800_R3C_REAR_DARK_END_H, 0x00},
+ {TP6800_R3D_HORIZ_DARK_LINE_L, 0x00},
+ {TP6800_R3E_HORIZ_DARK_LINE_H, 0x00},
+ {TP6800_R21_ENDP_1_CTL, 0x03},
+
+ {TP6800_R31_PIXEL_START, 0x0b},
+ {TP6800_R32_PIXEL_END_L, 0x8a},
+ {TP6800_R33_PIXEL_END_H, 0x02},
+ {TP6800_R34_LINE_START, 0x0e},
+ {TP6800_R35_LINE_END_L, 0xf4},
+ {TP6800_R36_LINE_END_H, 0x01},
+ {TP6800_R78_FORMAT, 0x00},
+ {TP6800_R12_SIF_ADDR_S, 0x20}, /* cx0342 i2c addr */
+ };
+ static const struct cmd sensor_init[] = {
+ {CX0342_OUTPUT_CTRL, 0x07},
+ {CX0342_BYPASS_MODE, 0x58},
+ {CX0342_GPXLTHD_L, 0x16},
+ {CX0342_RBPXLTHD_L, 0x16},
+ {CX0342_PLANETHD_L, 0xc0},
+ {CX0342_PLANETHD_H, 0x03},
+ {CX0342_RB_GAP_L, 0xff},
+ {CX0342_RB_GAP_H, 0x07},
+ {CX0342_G_GAP_L, 0xff},
+ {CX0342_G_GAP_H, 0x07},
+ {CX0342_RST_OVERFLOW_L, 0x5c},
+ {CX0342_RST_OVERFLOW_H, 0x01},
+ {CX0342_DATA_OVERFLOW_L, 0xfc},
+ {CX0342_DATA_OVERFLOW_H, 0x03},
+ {CX0342_DATA_UNDERFLOW_L, 0x00},
+ {CX0342_DATA_UNDERFLOW_H, 0x00},
+ {CX0342_SYS_CTRL_0, 0x40},
+ {CX0342_GLOBAL_GAIN, 0x01},
+ {CX0342_CLOCK_GEN, 0x00},
+ {CX0342_SYS_CTRL_0, 0x02},
+ {CX0342_IDLE_CTRL, 0x05},
+ {CX0342_ADCGN, 0x00},
+ {CX0342_ADC_CTL, 0x00},
+ {CX0342_LVRST_BLBIAS, 0x01},
+ {CX0342_VTHSEL, 0x0b},
+ {CX0342_RAMP_RIV, 0x0b},
+ {CX0342_LDOSEL, 0x07},
+ {CX0342_SPV_VALUE_L, 0x40},
+ {CX0342_SPV_VALUE_H, 0x02},
+ };
+
+ reg_w_buf(gspca_dev, reg_init, ARRAY_SIZE(reg_init));
+ i2c_w_buf(gspca_dev, sensor_init, ARRAY_SIZE(sensor_init));
+ i2c_w_buf(gspca_dev, cx0342_timing_seq, ARRAY_SIZE(cx0342_timing_seq));
+ reg_w(gspca_dev, TP6800_R5C_EDGE_THRLD, 0x10);
+ reg_w(gspca_dev, TP6800_R54_DARK_CFG, 0x00);
+ i2c_w(gspca_dev, CX0342_EXPO_LINE_H, 0x00);
+ i2c_w(gspca_dev, CX0342_SYS_CTRL_0, 0x01);
+ setexposure(gspca_dev);
+ set_led(gspca_dev, 1);
+ set_resolution(gspca_dev);
+}
+
+static void cx0342_6810_start(struct gspca_dev *gspca_dev)
+{
+ static const struct cmd sensor_init_2[] = {
+ {CX0342_EXPO_LINE_L, 0x6f},
+ {CX0342_EXPO_LINE_H, 0x02},
+ {CX0342_RAW_GRGAIN_L, 0x00},
+ {CX0342_RAW_GBGAIN_L, 0x00},
+ {CX0342_RAW_RGAIN_L, 0x00},
+ {CX0342_RAW_BGAIN_L, 0x00},
+ {CX0342_SYS_CTRL_0, 0x81},
+ };
+ static const struct cmd bridge_init_2[] = {
+ {0x4d, 0x00},
+ {0x4c, 0xff},
+ {0x4e, 0xff},
+ {0x4f, 0x00},
+ {TP6800_R7A_BLK_THRLD, 0x00},
+ {TP6800_R79_QUALITY, 0x04},
+ {TP6800_R79_QUALITY, 0x01},
+ };
+ static const struct cmd bridge_init_3[] = {
+ {TP6800_R31_PIXEL_START, 0x08},
+ {TP6800_R32_PIXEL_END_L, 0x87},
+ {TP6800_R33_PIXEL_END_H, 0x02},
+ {TP6800_R34_LINE_START, 0x0e},
+ {TP6800_R35_LINE_END_L, 0xf4},
+ {TP6800_R36_LINE_END_H, 0x01},
+ };
+ static const struct cmd sensor_init_3[] = {
+ {CX0342_AUTO_ADC_CALIB, 0x81},
+ {CX0342_EXPO_LINE_L, 0x6f},
+ {CX0342_EXPO_LINE_H, 0x02},
+ {CX0342_RAW_GRGAIN_L, 0x00},
+ {CX0342_RAW_GBGAIN_L, 0x00},
+ {CX0342_RAW_RGAIN_L, 0x00},
+ {CX0342_RAW_BGAIN_L, 0x00},
+ {CX0342_SYS_CTRL_0, 0x81},
+ };
+ static const struct cmd bridge_init_5[] = {
+ {0x4d, 0x00},
+ {0x4c, 0xff},
+ {0x4e, 0xff},
+ {0x4f, 0x00},
+ };
+ static const struct cmd sensor_init_4[] = {
+ {CX0342_EXPO_LINE_L, 0xd3},
+ {CX0342_EXPO_LINE_H, 0x01},
+/*fixme: gains, but 00..80 only*/
+ {CX0342_RAW_GRGAIN_L, 0x40},
+ {CX0342_RAW_GBGAIN_L, 0x40},
+ {CX0342_RAW_RGAIN_L, 0x40},
+ {CX0342_RAW_BGAIN_L, 0x40},
+ {CX0342_SYS_CTRL_0, 0x81},
+ };
+ static const struct cmd sensor_init_5[] = {
+ {CX0342_IDLE_CTRL, 0x05},
+ {CX0342_ADCGN, 0x00},
+ {CX0342_ADC_CTL, 0x00},
+ {CX0342_LVRST_BLBIAS, 0x01},
+ {CX0342_VTHSEL, 0x0b},
+ {CX0342_RAMP_RIV, 0x0b},
+ {CX0342_LDOSEL, 0x07},
+ {CX0342_SPV_VALUE_L, 0x40},
+ {CX0342_SPV_VALUE_H, 0x02},
+ {CX0342_AUTO_ADC_CALIB, 0x81},
+ };
+
+ reg_w(gspca_dev, 0x22, gspca_dev->alt);
+ i2c_w_buf(gspca_dev, sensor_init_2, ARRAY_SIZE(sensor_init_2));
+ reg_w_buf(gspca_dev, bridge_init_2, ARRAY_SIZE(bridge_init_2));
+ reg_w_buf(gspca_dev, tp6810_cx_init_common,
+ ARRAY_SIZE(tp6810_cx_init_common));
+ reg_w_buf(gspca_dev, bridge_init_3, ARRAY_SIZE(bridge_init_3));
+ if (gspca_dev->curr_mode) {
+ reg_w(gspca_dev, 0x4a, 0x7f);
+ reg_w(gspca_dev, 0x07, 0x05);
+ reg_w(gspca_dev, TP6800_R78_FORMAT, 0x00); /* vga */
+ } else {
+ reg_w(gspca_dev, 0x4a, 0xff);
+ reg_w(gspca_dev, 0x07, 0x85);
+ reg_w(gspca_dev, TP6800_R78_FORMAT, 0x01); /* qvga */
+ }
+ setgamma(gspca_dev);
+ reg_w_buf(gspca_dev, tp6810_bridge_start,
+ ARRAY_SIZE(tp6810_bridge_start));
+ setsharpness(gspca_dev);
+ bulk_w(gspca_dev, 0x03, color_gain[SENSOR_CX0342],
+ ARRAY_SIZE(color_gain[0]));
+ reg_w(gspca_dev, TP6800_R3F_FRAME_RATE, 0x87);
+ i2c_w_buf(gspca_dev, sensor_init_3, ARRAY_SIZE(sensor_init_3));
+ reg_w_buf(gspca_dev, bridge_init_5, ARRAY_SIZE(bridge_init_5));
+ i2c_w_buf(gspca_dev, sensor_init_4, ARRAY_SIZE(sensor_init_4));
+ reg_w_buf(gspca_dev, bridge_init_5, ARRAY_SIZE(bridge_init_5));
+ i2c_w_buf(gspca_dev, sensor_init_5, ARRAY_SIZE(sensor_init_5));
+
+ set_led(gspca_dev, 1);
+/* setquality(gspca_dev); */
+}
+
+static void soi763a_6800_start(struct gspca_dev *gspca_dev)
+{
+ static const struct cmd reg_init[] = {
+ {TP6800_R79_QUALITY, 0x04},
+ {TP6800_R79_QUALITY, 0x01},
+ {TP6800_R10_SIF_TYPE, 0x00}, /* i2c 8 bits */
+
+ {TP6800_R50, 0x00},
+ {TP6800_R51, 0x00},
+ {TP6800_R52, 0xff},
+ {TP6800_R53, 0x03},
+ {TP6800_R54_DARK_CFG, 0x07},
+ {TP6800_R5C_EDGE_THRLD, 0x40},
+
+ {TP6800_R79_QUALITY, 0x03},
+ {TP6800_R7A_BLK_THRLD, 0x40},
+
+ {TP6800_R2F_TIMING_CFG, 0x46},
+ {TP6800_R30_SENSOR_CFG, 0x10}, /* BG1..G0R */
+ {TP6800_R37_FRONT_DARK_ST, 0x00},
+ {TP6800_R38_FRONT_DARK_END, 0x00},
+ {TP6800_R39_REAR_DARK_ST_L, 0x00},
+ {TP6800_R3A_REAR_DARK_ST_H, 0x00},
+ {TP6800_R3B_REAR_DARK_END_L, 0x00},
+ {TP6800_R3C_REAR_DARK_END_H, 0x00},
+ {TP6800_R3D_HORIZ_DARK_LINE_L, 0x00},
+ {TP6800_R3E_HORIZ_DARK_LINE_H, 0x00},
+ {TP6800_R21_ENDP_1_CTL, 0x03},
+
+ {TP6800_R3F_FRAME_RATE, 0x04}, /* 15 fps */
+ {TP6800_R5D_DEMOSAIC_CFG, 0x0e}, /* scale down - medium edge */
+
+ {TP6800_R31_PIXEL_START, 0x1b},
+ {TP6800_R32_PIXEL_END_L, 0x9a},
+ {TP6800_R33_PIXEL_END_H, 0x02},
+ {TP6800_R34_LINE_START, 0x0f},
+ {TP6800_R35_LINE_END_L, 0xf4},
+ {TP6800_R36_LINE_END_H, 0x01},
+ {TP6800_R78_FORMAT, 0x01}, /* qvga */
+ {TP6800_R12_SIF_ADDR_S, 0x21}, /* soi763a i2c addr */
+ {TP6800_R1A_SIF_TX_DATA2, 0x00},
+ };
+ static const struct cmd sensor_init[] = {
+ {0x12, 0x48}, /* mirror - RGB */
+ {0x13, 0xa0}, /* clock - no AGC nor AEC */
+ {0x03, 0xa4}, /* saturation */
+ {0x04, 0x30}, /* hue */
+ {0x05, 0x88}, /* contrast */
+ {0x06, 0x60}, /* brightness */
+ {0x10, 0x41}, /* AEC */
+ {0x11, 0x40}, /* clock rate */
+ {0x13, 0xa0},
+ {0x14, 0x00}, /* 640x480 */
+ {0x15, 0x14},
+ {0x1f, 0x41},
+ {0x20, 0x80},
+ {0x23, 0xee},
+ {0x24, 0x50},
+ {0x25, 0x7a},
+ {0x26, 0x00},
+ {0x27, 0xe2},
+ {0x28, 0xb0},
+ {0x2a, 0x00},
+ {0x2b, 0x00},
+ {0x2d, 0x81},
+ {0x2f, 0x9d},
+ {0x60, 0x80},
+ {0x61, 0x00},
+ {0x62, 0x88},
+ {0x63, 0x11},
+ {0x64, 0x89},
+ {0x65, 0x00},
+ {0x67, 0x94},
+ {0x68, 0x7a},
+ {0x69, 0x0f},
+ {0x6c, 0x80},
+ {0x6d, 0x80},
+ {0x6e, 0x80},
+ {0x6f, 0xff},
+ {0x71, 0x20},
+ {0x74, 0x20},
+ {0x75, 0x86},
+ {0x77, 0xb5},
+ {0x17, 0x18}, /* H href start */
+ {0x18, 0xbf}, /* H href end */
+ {0x19, 0x03}, /* V start */
+ {0x1a, 0xf8}, /* V end */
+ {0x01, 0x80}, /* blue gain */
+ {0x02, 0x80}, /* red gain */
+ };
+
+ reg_w_buf(gspca_dev, reg_init, ARRAY_SIZE(reg_init));
+
+ i2c_w(gspca_dev, 0x12, 0x80); /* sensor reset */
+ msleep(10);
+
+ i2c_w_buf(gspca_dev, sensor_init, ARRAY_SIZE(sensor_init));
+
+ reg_w(gspca_dev, TP6800_R5C_EDGE_THRLD, 0x10);
+ reg_w(gspca_dev, TP6800_R54_DARK_CFG, 0x00);
+
+ setsharpness(gspca_dev);
+
+ bulk_w(gspca_dev, 0x03, color_gain[SENSOR_SOI763A],
+ ARRAY_SIZE(color_gain[0]));
+
+ set_led(gspca_dev, 1);
+ setexposure(gspca_dev);
+ setquality(gspca_dev);
+ setgamma(gspca_dev);
+}
+
+static void soi763a_6810_start(struct gspca_dev *gspca_dev)
+{
+ static const struct cmd bridge_init_2[] = {
+ {TP6800_R7A_BLK_THRLD, 0x00},
+ {TP6800_R79_QUALITY, 0x04},
+ {TP6800_R79_QUALITY, 0x01},
+ };
+ static const struct cmd bridge_init_3[] = {
+ {TP6800_R31_PIXEL_START, 0x20},
+ {TP6800_R32_PIXEL_END_L, 0x9f},
+ {TP6800_R33_PIXEL_END_H, 0x02},
+ {TP6800_R34_LINE_START, 0x13},
+ {TP6800_R35_LINE_END_L, 0xf8},
+ {TP6800_R36_LINE_END_H, 0x01},
+ };
+ static const struct cmd bridge_init_6[] = {
+ {0x08, 0xff},
+ {0x09, 0xff},
+ {0x0a, 0x5f},
+ {0x0b, 0x80},
+ };
+
+ reg_w(gspca_dev, 0x22, gspca_dev->alt);
+ bulk_w(gspca_dev, 0x03, color_null, sizeof color_null);
+ reg_w(gspca_dev, 0x59, 0x40);
+ setexposure(gspca_dev);
+ reg_w_buf(gspca_dev, bridge_init_2, ARRAY_SIZE(bridge_init_2));
+ reg_w_buf(gspca_dev, tp6810_ov_init_common,
+ ARRAY_SIZE(tp6810_ov_init_common));
+ reg_w_buf(gspca_dev, bridge_init_3, ARRAY_SIZE(bridge_init_3));
+ if (gspca_dev->curr_mode) {
+ reg_w(gspca_dev, 0x4a, 0x7f);
+ reg_w(gspca_dev, 0x07, 0x05);
+ reg_w(gspca_dev, TP6800_R78_FORMAT, 0x00); /* vga */
+ } else {
+ reg_w(gspca_dev, 0x4a, 0xff);
+ reg_w(gspca_dev, 0x07, 0x85);
+ reg_w(gspca_dev, TP6800_R78_FORMAT, 0x01); /* qvga */
+ }
+ setgamma(gspca_dev);
+ reg_w_buf(gspca_dev, tp6810_bridge_start,
+ ARRAY_SIZE(tp6810_bridge_start));
+
+ if (gspca_dev->curr_mode) {
+ reg_w(gspca_dev, 0x4f, 0x00);
+ reg_w(gspca_dev, 0x4e, 0x7c);
+ }
+
+ reg_w(gspca_dev, 0x00, 0x00);
+
+ setsharpness(gspca_dev);
+ bulk_w(gspca_dev, 0x03, color_gain[SENSOR_SOI763A],
+ ARRAY_SIZE(color_gain[0]));
+ set_led(gspca_dev, 1);
+ reg_w(gspca_dev, TP6800_R3F_FRAME_RATE, 0xf0);
+ setexposure(gspca_dev);
+ reg_w_buf(gspca_dev, bridge_init_6, ARRAY_SIZE(bridge_init_6));
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width);
+ set_dqt(gspca_dev, sd->quality);
+ if (sd->bridge == BRIDGE_TP6800) {
+ if (sd->sensor == SENSOR_CX0342)
+ cx0342_6800_start(gspca_dev);
+ else
+ soi763a_6800_start(gspca_dev);
+ } else {
+ if (sd->sensor == SENSOR_CX0342)
+ cx0342_6810_start(gspca_dev);
+ else
+ soi763a_6810_start(gspca_dev);
+ reg_w_buf(gspca_dev, tp6810_late_start,
+ ARRAY_SIZE(tp6810_late_start));
+ reg_w(gspca_dev, 0x80, 0x03);
+ reg_w(gspca_dev, 0x82, gspca_dev->curr_mode ? 0x0a : 0x0e);
+
+ setexposure(gspca_dev);
+ setquality(gspca_dev);
+ setautogain(gspca_dev);
+ }
+
+ setframerate(gspca_dev);
+
+ return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->bridge == BRIDGE_TP6800)
+ reg_w(gspca_dev, TP6800_R2F_TIMING_CFG, 0x03);
+ set_led(gspca_dev, 0);
+ reg_w(gspca_dev, TP6800_R21_ENDP_1_CTL, 0x00);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data,
+ int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* the start of frame contains:
+ * ff d8
+ * ff fe
+ * width / 16
+ * height / 8
+ * quality
+ */
+ if (sd->bridge == BRIDGE_TP6810) {
+ if (*data != 0x5a) {
+/*fixme: don't discard the whole frame..*/
+ if (*data == 0xaa || *data == 0x00)
+ return;
+ if (*data > 0xc0) {
+ PDEBUG(D_FRAM, "bad frame");
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+ }
+ data++;
+ len--;
+ if (*data == 0xff && data[1] == 0xd8) {
+/*fixme: there may be information in the 4 high bits*/
+ if ((data[6] & 0x0f) != sd->quality)
+ set_dqt(gspca_dev, data[6] & 0x0f);
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ sd->jpeg_hdr, JPEG_HDR_SZ);
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data + 7, len - 7);
+ } else if (data[len - 2] == 0xff && data[len - 1] == 0xd9) {
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ data, len);
+ } else {
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data, len);
+ }
+ return;
+ }
+
+ switch (*data) {
+ case 0x55:
+ gspca_frame_add(gspca_dev, LAST_PACKET, data, 0);
+
+ if (len < 8
+ || data[1] != 0xff || data[2] != 0xd8
+ || data[3] != 0xff || data[4] != 0xfe) {
+
+ /* Have only seen this with corrupt frames */
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+ if (data[7] != sd->quality)
+ set_dqt(gspca_dev, data[7]);
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ sd->jpeg_hdr, JPEG_HDR_SZ);
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data + 8, len - 8);
+ break;
+ case 0xaa:
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ break;
+ case 0xcc:
+ if (data[1] != 0xff || data[2] != 0xd8)
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data + 1, len - 1);
+ else
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ break;
+ }
+}
+
+/* -- do autogain -- */
+/* gain setting is done in setexposure() for tp6810 */
+static void setgain(struct gspca_dev *gspca_dev) {}
+/* !! coarse_grained_expo_autogain is not used !! */
+#define exp_too_low_cnt bridge
+#define exp_too_high_cnt sensor
+
+#include "autogain_functions.h"
+static void sd_dq_callback(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret, alen;
+ int luma, expo;
+
+ if (sd->ag_cnt < 0)
+ return;
+ if (--sd->ag_cnt > 5)
+ return;
+ switch (sd->ag_cnt) {
+/* case 5: */
+ default:
+ reg_w(gspca_dev, 0x7d, 0x00);
+ break;
+ case 4:
+ reg_w(gspca_dev, 0x27, 0xb0);
+ break;
+ case 3:
+ reg_w(gspca_dev, 0x0c, 0x01);
+ break;
+ case 2:
+ ret = usb_bulk_msg(gspca_dev->dev,
+ usb_rcvbulkpipe(gspca_dev->dev, 0x02),
+ gspca_dev->usb_buf,
+ 32,
+ &alen,
+ 500);
+ if (ret < 0) {
+ pr_err("bulk err %d\n", ret);
+ break;
+ }
+ /* values not used (unknown) */
+ break;
+ case 1:
+ reg_w(gspca_dev, 0x27, 0xd0);
+ break;
+ case 0:
+ ret = usb_bulk_msg(gspca_dev->dev,
+ usb_rcvbulkpipe(gspca_dev->dev, 0x02),
+ gspca_dev->usb_buf,
+ 32,
+ &alen,
+ 500);
+ if (ret < 0) {
+ pr_err("bulk err %d\n", ret);
+ break;
+ }
+ luma = ((gspca_dev->usb_buf[8] << 8) + gspca_dev->usb_buf[7] +
+ (gspca_dev->usb_buf[11] << 8) + gspca_dev->usb_buf[10] +
+ (gspca_dev->usb_buf[14] << 8) + gspca_dev->usb_buf[13] +
+ (gspca_dev->usb_buf[17] << 8) + gspca_dev->usb_buf[16] +
+ (gspca_dev->usb_buf[20] << 8) + gspca_dev->usb_buf[19] +
+ (gspca_dev->usb_buf[23] << 8) + gspca_dev->usb_buf[22] +
+ (gspca_dev->usb_buf[26] << 8) + gspca_dev->usb_buf[25] +
+ (gspca_dev->usb_buf[29] << 8) + gspca_dev->usb_buf[28])
+ / 8;
+ if (gspca_dev->width == 640)
+ luma /= 4;
+ reg_w(gspca_dev, 0x7d, 0x00);
+
+ expo = sd->ctrls[EXPOSURE].val;
+ ret = auto_gain_n_exposure(gspca_dev, luma,
+ 60, /* desired luma */
+ 6, /* dead zone */
+ 2, /* gain knee */
+ 70); /* expo knee */
+ sd->ag_cnt = AG_CNT_START;
+ if (sd->bridge == BRIDGE_TP6810) {
+ if ((expo >= 128 && sd->ctrls[EXPOSURE].val < 128)
+ || (expo < 128 && sd->ctrls[EXPOSURE].val >= 128))
+ setframerate(gspca_dev);
+ }
+ break;
+ }
+}
+
+/* get stream parameters (framerate) */
+static void sd_get_streamparm(struct gspca_dev *gspca_dev,
+ struct v4l2_streamparm *parm)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct v4l2_captureparm *cp = &parm->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+ int fr, i;
+
+ cp->capability |= V4L2_CAP_TIMEPERFRAME;
+ tpf->numerator = 1;
+ i = get_fr_idx(gspca_dev);
+ if (i & 0x80) {
+ if (sd->bridge == BRIDGE_TP6800)
+ fr = rates[6 - (i & 0x07)];
+ else
+ fr = rates_6810[7 - (i & 0x07)];
+ } else {
+ fr = rates[6 - i];
+ }
+ tpf->denominator = fr;
+}
+
+/* set stream parameters (framerate) */
+static void sd_set_streamparm(struct gspca_dev *gspca_dev,
+ struct v4l2_streamparm *parm)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct v4l2_captureparm *cp = &parm->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+ int fr, i;
+
+ sd->framerate = tpf->denominator / tpf->numerator;
+ if (gspca_dev->streaming)
+ setframerate(gspca_dev);
+
+ /* Return the actual framerate */
+ i = get_fr_idx(gspca_dev);
+ if (i & 0x80)
+ fr = rates_6810[7 - (i & 0x07)];
+ else
+ fr = rates[6 - i];
+ tpf->numerator = 1;
+ tpf->denominator = fr;
+}
+
+static int sd_set_jcomp(struct gspca_dev *gspca_dev,
+ struct v4l2_jpegcompression *jcomp)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_SOI763A)
+ jpeg_set_qual(sd->jpeg_hdr, jcomp->quality);
+/* else
+ fixme: TODO
+*/
+ return gspca_dev->usb_err;
+}
+
+static int sd_get_jcomp(struct gspca_dev *gspca_dev,
+ struct v4l2_jpegcompression *jcomp)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ memset(jcomp, 0, sizeof *jcomp);
+ jcomp->quality = jpeg_q[sd->quality];
+ jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT
+ | V4L2_JPEG_MARKER_DQT;
+ return 0;
+}
+
+static struct ctrl sd_ctrls[NCTRLS] = {
+[EXPOSURE] = {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0x01,
+ .maximum = 0xdc,
+ .step = 1,
+ .default_value = 0x4e,
+ },
+ .set_control = setexposure
+ },
+[QUALITY] = {
+ {
+ .id = V4L2_CID_PRIVATE_BASE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Compression quality",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+ .default_value = 13,
+ },
+ .set_control = setquality
+ },
+[RGAIN] = {
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red balance",
+ .minimum = 0,
+ .maximum = 4095,
+ .step = 1,
+ .default_value = 256,
+ },
+ .set_control = setrgain
+ },
+[GAIN] = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 4095,
+ .step = 1,
+ .default_value = 256,
+ },
+ .set = sd_setgain
+ },
+[BGAIN] = {
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue balance",
+ .minimum = 0,
+ .maximum = 4095,
+ .step = 1,
+ .default_value = 256,
+ },
+ .set_control = setbgain
+ },
+[SHARPNESS] = {
+ {
+ .id = V4L2_CID_SHARPNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Sharpness",
+ .minimum = 0,
+ .maximum = 3,
+ .step = 1,
+ .default_value = 2,
+ },
+ .set_control = setsharpness
+ },
+[GAMMA] = {
+ {
+ .id = V4L2_CID_GAMMA,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gamma",
+ .minimum = 0,
+ .maximum = NGAMMA - 1,
+ .step = 1,
+ .default_value = 1,
+ },
+ .set_control = setgamma
+ },
+[AUTOGAIN] = {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Gain",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = AUTOGAIN_DEF
+ },
+ .set_control = setautogain
+ },
+};
+
+static const struct sd_desc sd_desc = {
+ .name = KBUILD_MODNAME,
+ .ctrls = sd_ctrls,
+ .nctrls = NCTRLS,
+ .config = sd_config,
+ .init = sd_init,
+ .isoc_init = sd_isoc_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .pkt_scan = sd_pkt_scan,
+ .dq_callback = sd_dq_callback,
+ .get_streamparm = sd_get_streamparm,
+ .set_streamparm = sd_set_streamparm,
+ .get_jcomp = sd_get_jcomp,
+ .set_jcomp = sd_set_jcomp,
+};
+
+static const struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x06a2, 0x0003), .driver_info = BRIDGE_TP6800},
+ {USB_DEVICE(0x06a2, 0x6810), .driver_info = BRIDGE_TP6810},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+static int sd_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(interface, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+ .reset_resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ return usb_register(&sd_driver);
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
+
+module_param(force_sensor, int, 0644);
+MODULE_PARM_DESC(force_sensor,
+ "Force sensor. 0: cx0342, 1: soi763a");
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 6caed73..7ee2c82 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "vc032x"
#include "gspca.h"
@@ -3169,7 +3171,7 @@
index, gspca_dev->usb_buf, len,
500);
if (ret < 0) {
- err("reg_r err %d", ret);
+ pr_err("reg_r err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -3210,7 +3212,7 @@
value, index, NULL, 0,
500);
if (ret < 0) {
- err("reg_w err %d", ret);
+ pr_err("reg_w err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -3235,8 +3237,7 @@
reg_r(gspca_dev, 0xa1, 0xb33f, 1);
if (!(gspca_dev->usb_buf[0] & 0x02)) {
- err("I2c Bus Busy Wait %02x",
- gspca_dev->usb_buf[0]);
+ pr_err("I2c Bus Busy Wait %02x\n", gspca_dev->usb_buf[0]);
return 0;
}
reg_w(gspca_dev, 0xa0, address, 0xb33a);
@@ -3349,7 +3350,7 @@
msleep(20);
} while (--retry > 0);
if (retry <= 0)
- err("i2c_write timeout");
+ pr_err("i2c_write timeout\n");
}
static void put_tab_to_reg(struct gspca_dev *gspca_dev,
@@ -3446,7 +3447,7 @@
switch (sensor) {
case -1:
- err("Unknown sensor...");
+ pr_err("Unknown sensor...\n");
return -EINVAL;
case SENSOR_HV7131R:
PDEBUG(D_PROBE, "Find Sensor HV7131R");
diff --git a/drivers/media/video/gspca/vicam.c b/drivers/media/video/gspca/vicam.c
index 84dfbab..81dd4c9 100644
--- a/drivers/media/video/gspca/vicam.c
+++ b/drivers/media/video/gspca/vicam.c
@@ -26,6 +26,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "vicam"
#define HEADER_SIZE 64
@@ -117,7 +119,7 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, data, len, 1000);
if (ret < 0)
- err("control msg req %02X error %d", request, ret);
+ pr_err("control msg req %02X error %d\n", request, ret);
return ret;
}
@@ -189,8 +191,8 @@
data, size, &act_len, 10000);
/* successful, it returns 0, otherwise negative */
if (ret < 0 || act_len != size) {
- err("bulk read fail (%d) len %d/%d",
- ret, act_len, size);
+ pr_err("bulk read fail (%d) len %d/%d\n",
+ ret, act_len, size);
return -EIO;
}
return 0;
@@ -216,7 +218,7 @@
HEADER_SIZE;
buffer = kmalloc(frame_sz, GFP_KERNEL | GFP_DMA);
if (!buffer) {
- err("Couldn't allocate USB buffer");
+ pr_err("Couldn't allocate USB buffer\n");
goto exit;
}
@@ -269,7 +271,7 @@
ret = request_ihex_firmware(&fw, "vicam/firmware.fw",
&gspca_dev->dev->dev);
if (ret) {
- err("Failed to load \"vicam/firmware.fw\": %d\n", ret);
+ pr_err("Failed to load \"vicam/firmware.fw\": %d\n", ret);
return ret;
}
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
index 4a9e622..27d2cef 100644
--- a/drivers/media/video/gspca/w996Xcf.c
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -31,6 +31,8 @@
the sensor drivers to v4l2 sub drivers, and properly split of this
driver from ov519.c */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */
#define Y_QUANTABLE (&sd->jpeg_hdr[JPEG_QT0_OFFSET])
@@ -81,7 +83,7 @@
USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
value, 0x06, sd->gspca_dev.usb_buf, 6, 500);
if (ret < 0) {
- err("Write FSB registers failed (%d)", ret);
+ pr_err("Write FSB registers failed (%d)\n", ret);
sd->gspca_dev.usb_err = ret;
}
}
@@ -108,7 +110,7 @@
udelay(W9968CF_I2C_BUS_DELAY);
if (ret < 0) {
- err("Write SB reg [01] %04x failed", value);
+ pr_err("Write SB reg [01] %04x failed\n", value);
sd->gspca_dev.usb_err = ret;
}
}
@@ -135,7 +137,7 @@
ret = sd->gspca_dev.usb_buf[0] |
(sd->gspca_dev.usb_buf[1] << 8);
} else {
- err("Read SB reg [01] failed");
+ pr_err("Read SB reg [01] failed\n");
sd->gspca_dev.usb_err = ret;
}
diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/video/gspca/xirlink_cit.c
index c089a0f..3aed42a 100644
--- a/drivers/media/video/gspca/xirlink_cit.c
+++ b/drivers/media/video/gspca/xirlink_cit.c
@@ -27,6 +27,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "xirlink-cit"
#include <linux/input.h>
@@ -800,8 +802,8 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
value, index, NULL, 0, 1000);
if (err < 0)
- err("Failed to write a register (index 0x%04X,"
- " value 0x%02X, error %d)", index, value, err);
+ pr_err("Failed to write a register (index 0x%04X, value 0x%02X, error %d)\n",
+ index, value, err);
return 0;
}
@@ -816,8 +818,8 @@
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
0x00, index, buf, 8, 1000);
if (res < 0) {
- err("Failed to read a register (index 0x%04X, error %d)",
- index, res);
+ pr_err("Failed to read a register (index 0x%04X, error %d)\n",
+ index, res);
return res;
}
@@ -1587,7 +1589,7 @@
intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
alt = usb_altnum_to_altsetting(intf, gspca_dev->alt);
if (!alt) {
- err("Couldn't get altsetting");
+ pr_err("Couldn't get altsetting\n");
return -EIO;
}
@@ -2824,7 +2826,7 @@
ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1);
if (ret < 0)
- err("set alt 1 err %d", ret);
+ pr_err("set alt 1 err %d\n", ret);
return ret;
}
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 61cdd56..30ea1e4 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define MODULE_NAME "zc3xx"
#include <linux/input.h>
@@ -5666,7 +5668,7 @@
index, gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
- err("reg_r_i err %d", ret);
+ pr_err("reg_r_i err %d\n", ret);
gspca_dev->usb_err = ret;
return 0;
}
@@ -5698,7 +5700,7 @@
value, index, NULL, 0,
500);
if (ret < 0) {
- err("reg_w_i err %d", ret);
+ pr_err("reg_w_i err %d\n", ret);
gspca_dev->usb_err = ret;
}
}
@@ -5724,7 +5726,7 @@
msleep(20);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
if (retbyte != 0x00)
- err("i2c_r status error %02x", retbyte);
+ pr_err("i2c_r status error %02x\n", retbyte);
retval = reg_r_i(gspca_dev, 0x0095); /* read Lowbyte */
retval |= reg_r_i(gspca_dev, 0x0096) << 8; /* read Hightbyte */
PDEBUG(D_USBI, "i2c r [%02x] -> %04x (%02x)",
@@ -5748,7 +5750,7 @@
msleep(1);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
if (retbyte != 0x00)
- err("i2c_w status error %02x", retbyte);
+ pr_err("i2c_w status error %02x\n", retbyte);
PDEBUG(D_USBO, "i2c w [%02x] = %02x%02x (%02x)",
reg, valH, valL, retbyte);
return retbyte;
@@ -6497,7 +6499,7 @@
PDEBUG(D_PROBE, "Sensor GC0303");
break;
default:
- warn("Unknown sensor - set to TAS5130C");
+ pr_warn("Unknown sensor - set to TAS5130C\n");
sd->sensor = SENSOR_TAS5130C;
}
break;
@@ -6603,7 +6605,7 @@
sd->sensor = SENSOR_OV7620; /* same sensor (?) */
break;
default:
- err("Unknown sensor %04x", sensor);
+ pr_err("Unknown sensor %04x\n", sensor);
return -EINVAL;
}
}
@@ -6970,6 +6972,7 @@
};
static const struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x03f0, 0x1b07)},
{USB_DEVICE(0x041e, 0x041e)},
{USB_DEVICE(0x041e, 0x4017)},
{USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
diff --git a/drivers/media/video/hdpvr/Makefile b/drivers/media/video/hdpvr/Makefile
index 3baa9f6..52f057f 100644
--- a/drivers/media/video/hdpvr/Makefile
+++ b/drivers/media/video/hdpvr/Makefile
@@ -2,6 +2,6 @@
obj-$(CONFIG_VIDEO_HDPVR) += hdpvr.o
-EXTRA_CFLAGS += -Idrivers/media/video
+ccflags-y += -Idrivers/media/video
-EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index cbc505a..9cb039e 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -21,6 +21,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DEBUG_VARIABLE debug
#include <media/saa7146_vv.h>
@@ -175,13 +177,14 @@
union i2c_smbus_data data;
int i = 0;
- DEB_D(("hexium_init_done called.\n"));
+ DEB_D("hexium_init_done called\n");
/* initialize the helper ics to useful values */
for (i = 0; i < sizeof(hexium_ks0127b); i++) {
data.byte = hexium_ks0127b[i];
if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) {
- printk("hexium_gemini: hexium_init_done() failed for address 0x%02x\n", i);
+ pr_err("hexium_init_done() failed for address 0x%02x\n",
+ i);
}
}
@@ -192,7 +195,7 @@
{
union i2c_smbus_data data;
- DEB_D((".\n"));
+ DEB_D("\n");
data.byte = hexium_input_select[input].byte;
if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, hexium_input_select[input].adr, I2C_SMBUS_BYTE_DATA, &data)) {
@@ -207,12 +210,13 @@
union i2c_smbus_data data;
int i = 0;
- DEB_D((".\n"));
+ DEB_D("\n");
while (vdec[i].adr != -1) {
data.byte = vdec[i].byte;
if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, vdec[i].adr, I2C_SMBUS_BYTE_DATA, &data)) {
- printk("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n", i);
+ pr_err("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n",
+ i);
return -1;
}
i++;
@@ -222,14 +226,14 @@
static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
{
- DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index));
+ DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
if (i->index >= HEXIUM_INPUTS)
return -EINVAL;
memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
- DEB_D(("v4l2_ioctl: VIDIOC_ENUMINPUT %d.\n", i->index));
+ DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index);
return 0;
}
@@ -240,7 +244,7 @@
*input = hexium->cur_input;
- DEB_D(("VIDIOC_G_INPUT: %d\n", *input));
+ DEB_D("VIDIOC_G_INPUT: %d\n", *input);
return 0;
}
@@ -249,7 +253,7 @@
struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
struct hexium *hexium = (struct hexium *) dev->ext_priv;
- DEB_EE(("VIDIOC_S_INPUT %d.\n", input));
+ DEB_EE("VIDIOC_S_INPUT %d\n", input);
if (input >= HEXIUM_INPUTS)
return -EINVAL;
@@ -270,7 +274,7 @@
for (i = HEXIUM_CONTROLS - 1; i >= 0; i--) {
if (hexium_controls[i].id == qc->id) {
*qc = hexium_controls[i];
- DEB_D(("VIDIOC_QUERYCTRL %d.\n", qc->id));
+ DEB_D("VIDIOC_QUERYCTRL %d\n", qc->id);
return 0;
}
}
@@ -293,7 +297,7 @@
if (vc->id == V4L2_CID_PRIVATE_BASE) {
vc->value = hexium->cur_bw;
- DEB_D(("VIDIOC_G_CTRL BW:%d.\n", vc->value));
+ DEB_D("VIDIOC_G_CTRL BW:%d\n", vc->value);
return 0;
}
return -EINVAL;
@@ -316,7 +320,7 @@
if (vc->id == V4L2_CID_PRIVATE_BASE)
hexium->cur_bw = vc->value;
- DEB_D(("VIDIOC_S_CTRL BW:%d.\n", hexium->cur_bw));
+ DEB_D("VIDIOC_S_CTRL BW:%d\n", hexium->cur_bw);
if (0 == hexium->cur_bw && V4L2_STD_PAL == hexium->cur_std) {
hexium_set_standard(hexium, hexium_pal);
@@ -351,14 +355,14 @@
/* this function only gets called when the probing was successful */
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
- struct hexium *hexium = (struct hexium *) dev->ext_priv;
+ struct hexium *hexium;
int ret;
- DEB_EE((".\n"));
+ DEB_EE("\n");
hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL);
if (NULL == hexium) {
- printk("hexium_gemini: not enough kernel memory in hexium_attach().\n");
+ pr_err("not enough kernel memory in hexium_attach()\n");
return -ENOMEM;
}
dev->ext_priv = hexium;
@@ -371,7 +375,7 @@
};
saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
if (i2c_add_adapter(&hexium->i2c_adapter) < 0) {
- DEB_S(("cannot register i2c-device. skipping.\n"));
+ DEB_S("cannot register i2c-device. skipping.\n");
kfree(hexium);
return -EFAULT;
}
@@ -402,11 +406,11 @@
vv_data.ops.vidioc_s_input = vidioc_s_input;
ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_GRABBER);
if (ret < 0) {
- printk("hexium_gemini: cannot register capture v4l2 device. skipping.\n");
+ pr_err("cannot register capture v4l2 device. skipping.\n");
return ret;
}
- printk("hexium_gemini: found 'hexium gemini' frame grabber-%d.\n", hexium_num);
+ pr_info("found 'hexium gemini' frame grabber-%d\n", hexium_num);
hexium_num++;
return 0;
@@ -416,7 +420,7 @@
{
struct hexium *hexium = (struct hexium *) dev->ext_priv;
- DEB_EE(("dev:%p\n", dev));
+ DEB_EE("dev:%p\n", dev);
saa7146_unregister_device(&hexium->video_dev, dev);
saa7146_vv_release(dev);
@@ -508,7 +512,7 @@
static int __init hexium_init_module(void)
{
if (0 != saa7146_register_extension(&hexium_extension)) {
- DEB_S(("failed to register extension.\n"));
+ DEB_S("failed to register extension\n");
return -ENODEV;
}
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index 6ad7e1c..74861a4 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -21,6 +21,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DEBUG_VARIABLE debug
#include <media/saa7146_vv.h>
@@ -209,7 +211,7 @@
union i2c_smbus_data data;
int err = 0;
- DEB_EE((".\n"));
+ DEB_EE("\n");
/* there are no hexium orion cards with revision 0 saa7146s */
if (0 == dev->revision) {
@@ -218,7 +220,7 @@
hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL);
if (NULL == hexium) {
- printk("hexium_orion: hexium_probe: not enough kernel memory.\n");
+ pr_err("hexium_probe: not enough kernel memory\n");
return -ENOMEM;
}
@@ -234,7 +236,7 @@
};
saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
if (i2c_add_adapter(&hexium->i2c_adapter) < 0) {
- DEB_S(("cannot register i2c-device. skipping.\n"));
+ DEB_S("cannot register i2c-device. skipping.\n");
kfree(hexium);
return -EFAULT;
}
@@ -248,7 +250,7 @@
/* detect newer Hexium Orion cards by subsystem ids */
if (0x17c8 == dev->pci->subsystem_vendor && 0x0101 == dev->pci->subsystem_device) {
- printk("hexium_orion: device is a Hexium Orion w/ 1 SVHS + 3 BNC inputs.\n");
+ pr_info("device is a Hexium Orion w/ 1 SVHS + 3 BNC inputs\n");
/* we store the pointer in our private data field */
dev->ext_priv = hexium;
hexium->type = HEXIUM_ORION_1SVHS_3BNC;
@@ -256,7 +258,7 @@
}
if (0x17c8 == dev->pci->subsystem_vendor && 0x2101 == dev->pci->subsystem_device) {
- printk("hexium_orion: device is a Hexium Orion w/ 4 BNC inputs.\n");
+ pr_info("device is a Hexium Orion w/ 4 BNC inputs\n");
/* we store the pointer in our private data field */
dev->ext_priv = hexium;
hexium->type = HEXIUM_ORION_4BNC;
@@ -266,7 +268,7 @@
/* check if this is an old hexium Orion card by looking at
a saa7110 at address 0x4e */
if (0 == (err = i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_READ, 0x00, I2C_SMBUS_BYTE_DATA, &data))) {
- printk("hexium_orion: device is a Hexium HV-PCI6/Orion (old).\n");
+ pr_info("device is a Hexium HV-PCI6/Orion (old)\n");
/* we store the pointer in our private data field */
dev->ext_priv = hexium;
hexium->type = HEXIUM_HV_PCI6_ORION;
@@ -288,13 +290,13 @@
union i2c_smbus_data data;
int i = 0;
- DEB_D(("hexium_init_done called.\n"));
+ DEB_D("hexium_init_done called\n");
/* initialize the helper ics to useful values */
for (i = 0; i < sizeof(hexium_saa7110); i++) {
data.byte = hexium_saa7110[i];
if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) {
- printk("hexium_orion: failed for address 0x%02x\n", i);
+ pr_err("failed for address 0x%02x\n", i);
}
}
@@ -306,7 +308,7 @@
union i2c_smbus_data data;
int i = 0;
- DEB_D((".\n"));
+ DEB_D("\n");
for (i = 0; i < 8; i++) {
int adr = hexium_input_select[input].data[i].adr;
@@ -314,7 +316,7 @@
if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, adr, I2C_SMBUS_BYTE_DATA, &data)) {
return -1;
}
- printk("%d: 0x%02x => 0x%02x\n",input, adr,data.byte);
+ pr_debug("%d: 0x%02x => 0x%02x\n", input, adr, data.byte);
}
return 0;
@@ -322,14 +324,14 @@
static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
{
- DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index));
+ DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
if (i->index >= HEXIUM_INPUTS)
return -EINVAL;
memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
- DEB_D(("v4l2_ioctl: VIDIOC_ENUMINPUT %d.\n", i->index));
+ DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index);
return 0;
}
@@ -340,7 +342,7 @@
*input = hexium->cur_input;
- DEB_D(("VIDIOC_G_INPUT: %d\n", *input));
+ DEB_D("VIDIOC_G_INPUT: %d\n", *input);
return 0;
}
@@ -365,18 +367,18 @@
{
struct hexium *hexium = (struct hexium *) dev->ext_priv;
- DEB_EE((".\n"));
+ DEB_EE("\n");
saa7146_vv_init(dev, &vv_data);
vv_data.ops.vidioc_enum_input = vidioc_enum_input;
vv_data.ops.vidioc_g_input = vidioc_g_input;
vv_data.ops.vidioc_s_input = vidioc_s_input;
if (0 != saa7146_register_device(&hexium->video_dev, dev, "hexium orion", VFL_TYPE_GRABBER)) {
- printk("hexium_orion: cannot register capture v4l2 device. skipping.\n");
+ pr_err("cannot register capture v4l2 device. skipping.\n");
return -1;
}
- printk("hexium_orion: found 'hexium orion' frame grabber-%d.\n", hexium_num);
+ pr_err("found 'hexium orion' frame grabber-%d\n", hexium_num);
hexium_num++;
/* the rest */
@@ -390,7 +392,7 @@
{
struct hexium *hexium = (struct hexium *) dev->ext_priv;
- DEB_EE(("dev:%p\n", dev));
+ DEB_EE("dev:%p\n", dev);
saa7146_unregister_device(&hexium->video_dev, dev);
saa7146_vv_release(dev);
@@ -479,7 +481,7 @@
static int __init hexium_init_module(void)
{
if (0 != saa7146_register_extension(&extension)) {
- DEB_S(("failed to register extension.\n"));
+ DEB_S("failed to register extension\n");
return -ENODEV;
}
diff --git a/drivers/media/video/ivtv/Makefile b/drivers/media/video/ivtv/Makefile
index 26ce0d6..71ab76a 100644
--- a/drivers/media/video/ivtv/Makefile
+++ b/drivers/media/video/ivtv/Makefile
@@ -7,8 +7,8 @@
obj-$(CONFIG_VIDEO_IVTV) += ivtv.o
obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 3e5c090..ecafa69 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -1203,9 +1203,7 @@
cap->service_lines[f][l] = set;
}
}
- return 0;
- }
- if (cap->type == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) {
+ } else if (cap->type == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) {
if (!(itv->v4l2_cap & V4L2_CAP_SLICED_VBI_OUTPUT))
return -EINVAL;
if (itv->is_60hz) {
@@ -1215,9 +1213,16 @@
cap->service_lines[0][23] = V4L2_SLICED_WSS_625;
cap->service_lines[0][16] = V4L2_SLICED_VPS;
}
- return 0;
+ } else {
+ return -EINVAL;
}
- return -EINVAL;
+
+ set = 0;
+ for (f = 0; f < 2; f++)
+ for (l = 0; l < 24; l++)
+ set |= cap->service_lines[f][l];
+ cap->service_set = set;
+ return 0;
}
static int ivtv_g_enc_index(struct file *file, void *fh, struct v4l2_enc_idx *idx)
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index fb8e4a7..5d21d05 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -936,7 +936,7 @@
return -EINVAL;
}
- if (!pdata->irq) {
+ if (!client->irq) {
dev_err(&client->dev, "Interrupt not assigned\n");
return -EINVAL;
}
@@ -973,7 +973,7 @@
init_waitqueue_head(&info->irq_waitq);
INIT_WORK(&info->work_irq, m5mols_irq_work);
- ret = request_irq(pdata->irq, m5mols_irq_handler,
+ ret = request_irq(client->irq, m5mols_irq_handler,
IRQF_TRIGGER_RISING, MODULE_NAME, sd);
if (ret) {
dev_err(&client->dev, "Interrupt request failed: %d\n", ret);
@@ -998,7 +998,7 @@
struct m5mols_info *info = to_m5mols(sd);
v4l2_device_unregister_subdev(sd);
- free_irq(info->pdata->irq, sd);
+ free_irq(client->irq, sd);
regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
gpio_free(info->pdata->gpio_reset);
diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c
index 83c1451..1141b97 100644
--- a/drivers/media/video/marvell-ccic/mcam-core.c
+++ b/drivers/media/video/marvell-ccic/mcam-core.c
@@ -450,7 +450,7 @@
buf = cam->vb_bufs[frame ^ 0x1];
cam->vb_bufs[frame] = buf;
mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR,
- vb2_dma_contig_plane_paddr(&buf->vb_buf, 0));
+ vb2_dma_contig_plane_dma_addr(&buf->vb_buf, 0));
set_bit(CF_SINGLE_BUFFER, &cam->flags);
singles++;
return;
@@ -461,7 +461,7 @@
buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue);
list_del_init(&buf->queue);
mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR,
- vb2_dma_contig_plane_paddr(&buf->vb_buf, 0));
+ vb2_dma_contig_plane_dma_addr(&buf->vb_buf, 0));
cam->vb_bufs[frame] = buf;
clear_bit(CF_SINGLE_BUFFER, &cam->flags);
}
@@ -884,7 +884,7 @@
*/
static int mcam_vb_queue_setup(struct vb2_queue *vq, unsigned int *nbufs,
- unsigned int *num_planes, unsigned long sizes[],
+ unsigned int *num_planes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct mcam_camera *cam = vb2_get_drv_priv(vq);
@@ -940,12 +940,14 @@
/*
* These need to be called with the mutex held from vb2
*/
-static int mcam_vb_start_streaming(struct vb2_queue *vq)
+static int mcam_vb_start_streaming(struct vb2_queue *vq, unsigned int count)
{
struct mcam_camera *cam = vb2_get_drv_priv(vq);
- if (cam->state != S_IDLE)
+ if (cam->state != S_IDLE) {
+ INIT_LIST_HEAD(&cam->buffers);
return -EINVAL;
+ }
cam->sequence = 0;
/*
* Videobuf2 sneakily hoards all the buffers and won't
diff --git a/drivers/media/video/marvell-ccic/mmp-driver.c b/drivers/media/video/marvell-ccic/mmp-driver.c
index d6b7645..fb0b124 100644
--- a/drivers/media/video/marvell-ccic/mmp-driver.c
+++ b/drivers/media/video/marvell-ccic/mmp-driver.c
@@ -29,6 +29,7 @@
#include "mcam-core.h"
+MODULE_ALIAS("platform:mmp-camera");
MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 166bf93..9594b52 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -739,7 +739,7 @@
*/
static int m2mtest_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned long sizes[],
+ unsigned int *nplanes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct m2mtest_ctx *ctx = vb2_get_drv_priv(vq);
@@ -793,10 +793,24 @@
v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
}
+static void m2mtest_wait_prepare(struct vb2_queue *q)
+{
+ struct m2mtest_ctx *ctx = vb2_get_drv_priv(q);
+ m2mtest_unlock(ctx);
+}
+
+static void m2mtest_wait_finish(struct vb2_queue *q)
+{
+ struct m2mtest_ctx *ctx = vb2_get_drv_priv(q);
+ m2mtest_lock(ctx);
+}
+
static struct vb2_ops m2mtest_qops = {
.queue_setup = m2mtest_queue_setup,
.buf_prepare = m2mtest_buf_prepare,
.buf_queue = m2mtest_buf_queue,
+ .wait_prepare = m2mtest_wait_prepare,
+ .wait_finish = m2mtest_wait_finish,
};
static int queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index c43c81f..d0f5388 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -426,6 +426,20 @@
return 0;
}
+static int msp_querystd(struct v4l2_subdev *sd, v4l2_std_id *id)
+{
+ struct msp_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ *id &= state->detected_std;
+
+ v4l_dbg(2, msp_debug, client,
+ "detected standard: %s(0x%08Lx)\n",
+ msp_standard_std_name(state->std), state->detected_std);
+
+ return 0;
+}
+
static int msp_s_std(struct v4l2_subdev *sd, v4l2_std_id id)
{
struct msp_state *state = to_state(sd);
@@ -616,6 +630,10 @@
.s_std = msp_s_std,
};
+static const struct v4l2_subdev_video_ops msp_video_ops = {
+ .querystd = msp_querystd,
+};
+
static const struct v4l2_subdev_tuner_ops msp_tuner_ops = {
.s_frequency = msp_s_frequency,
.g_tuner = msp_g_tuner,
@@ -630,6 +648,7 @@
static const struct v4l2_subdev_ops msp_ops = {
.core = &msp_core_ops,
+ .video = &msp_video_ops,
.tuner = &msp_tuner_ops,
.audio = &msp_audio_ops,
};
@@ -664,6 +683,7 @@
v4l2_i2c_subdev_init(sd, client, &msp_ops);
state->v4l2_std = V4L2_STD_NTSC;
+ state->detected_std = V4L2_STD_ALL;
state->audmode = V4L2_TUNER_MODE_STEREO;
state->input = -1;
state->i2s_mode = 0;
diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/video/msp3400-driver.h
index 32a478e..831e8db 100644
--- a/drivers/media/video/msp3400-driver.h
+++ b/drivers/media/video/msp3400-driver.h
@@ -75,7 +75,7 @@
int opmode;
int std;
int mode;
- v4l2_std_id v4l2_std;
+ v4l2_std_id v4l2_std, detected_std;
int nicam_on;
int acb;
int in_scart;
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index 80387e2..f8b5171 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -37,29 +37,49 @@
int retval;
int main, second;
char *name;
+ v4l2_std_id std;
} msp_stdlist[] = {
- { 0x0000, 0, 0, "could not detect sound standard" },
- { 0x0001, 0, 0, "autodetect start" },
- { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72), "4.5/4.72 M Dual FM-Stereo" },
- { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875), "5.5/5.74 B/G Dual FM-Stereo" },
- { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25 D/K1 Dual FM-Stereo" },
- { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74 D/K2 Dual FM-Stereo" },
- { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 D/K FM-Mono (HDEV3)" },
- { 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875), "6.5/5.74 D/K3 Dual FM-Stereo" },
- { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85 B/G NICAM FM" },
- { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 L NICAM AM" },
- { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55 I NICAM FM" },
- { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM" },
- { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV2)" },
- { 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV3)" },
- { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Stereo" },
- { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Mono + SAP" },
- { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M EIA-J Japan Stereo" },
- { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7), "10.7 FM-Stereo Radio" },
- { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 SAT-Mono" },
- { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20), "7.02/7.20 SAT-Stereo" },
- { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2), "7.2 SAT ADR" },
- { -1, 0, 0, NULL }, /* EOF */
+ { 0x0000, 0, 0, "could not detect sound standard", V4L2_STD_ALL },
+ { 0x0001, 0, 0, "autodetect start", V4L2_STD_ALL },
+ { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72),
+ "4.5/4.72 M Dual FM-Stereo", V4L2_STD_MN },
+ { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875),
+ "5.5/5.74 B/G Dual FM-Stereo", V4L2_STD_BG },
+ { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125),
+ "6.5/6.25 D/K1 Dual FM-Stereo", V4L2_STD_DK },
+ { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875),
+ "6.5/6.74 D/K2 Dual FM-Stereo", V4L2_STD_DK },
+ { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5),
+ "6.5 D/K FM-Mono (HDEV3)", V4L2_STD_DK },
+ { 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875),
+ "6.5/5.74 D/K3 Dual FM-Stereo", V4L2_STD_DK },
+ { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85),
+ "5.5/5.85 B/G NICAM FM", V4L2_STD_BG },
+ { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
+ "6.5/5.85 L NICAM AM", V4L2_STD_L },
+ { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55),
+ "6.0/6.55 I NICAM FM", V4L2_STD_PAL_I },
+ { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
+ "6.5/5.85 D/K NICAM FM", V4L2_STD_DK },
+ { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
+ "6.5/5.85 D/K NICAM FM (HDEV2)", V4L2_STD_DK },
+ { 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
+ "6.5/5.85 D/K NICAM FM (HDEV3)", V4L2_STD_DK },
+ { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
+ "4.5 M BTSC-Stereo", V4L2_STD_MTS },
+ { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
+ "4.5 M BTSC-Mono + SAP", V4L2_STD_MTS },
+ { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
+ "4.5 M EIA-J Japan Stereo", V4L2_STD_NTSC_M_JP },
+ { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7),
+ "10.7 FM-Stereo Radio", V4L2_STD_ALL },
+ { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5),
+ "6.5 SAT-Mono", V4L2_STD_ALL },
+ { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20),
+ "7.02/7.20 SAT-Stereo", V4L2_STD_ALL },
+ { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2),
+ "7.2 SAT ADR", V4L2_STD_ALL },
+ { -1, 0, 0, NULL, 0 }, /* EOF */
};
static struct msp3400c_init_data_dem {
@@ -156,6 +176,16 @@
return "unknown";
}
+static v4l2_std_id msp_standard_std(int std)
+{
+ int i;
+
+ for (i = 0; msp_stdlist[i].name != NULL; i++)
+ if (msp_stdlist[i].retval == std)
+ return msp_stdlist[i].std;
+ return V4L2_STD_ALL;
+}
+
static void msp_set_source(struct i2c_client *client, u16 src)
{
struct msp_state *state = to_state(i2c_get_clientdata(client));
@@ -479,6 +509,7 @@
int count, max1, max2, val1, val2, val, i;
v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n");
+ state->detected_std = V4L2_STD_ALL;
set_freezable();
for (;;) {
v4l_dbg(2, msp_debug, client, "msp3400 thread: sleep\n");
@@ -579,6 +610,7 @@
state->main = msp3400c_carrier_detect_main[max1].cdo;
switch (max1) {
case 1: /* 5.5 */
+ state->detected_std = V4L2_STD_BG | V4L2_STD_PAL_H;
if (max2 == 0) {
/* B/G FM-stereo */
state->second = msp3400c_carrier_detect_55[max2].cdo;
@@ -596,6 +628,7 @@
break;
case 2: /* 6.0 */
/* PAL I NICAM */
+ state->detected_std = V4L2_STD_PAL_I;
state->second = MSP_CARRIER(6.552);
msp3400c_set_mode(client, MSP_MODE_FM_NICAM2);
state->nicam_on = 1;
@@ -607,22 +640,26 @@
state->second = msp3400c_carrier_detect_65[max2].cdo;
msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
state->watch_stereo = 1;
+ state->detected_std = V4L2_STD_DK;
} else if (max2 == 0 && (state->v4l2_std & V4L2_STD_SECAM)) {
/* L NICAM or AM-mono */
state->second = msp3400c_carrier_detect_65[max2].cdo;
msp3400c_set_mode(client, MSP_MODE_AM_NICAM);
state->watch_stereo = 1;
+ state->detected_std = V4L2_STD_L;
} else if (max2 == 0 && state->has_nicam) {
/* D/K NICAM */
state->second = msp3400c_carrier_detect_65[max2].cdo;
msp3400c_set_mode(client, MSP_MODE_FM_NICAM1);
state->nicam_on = 1;
state->watch_stereo = 1;
+ state->detected_std = V4L2_STD_DK;
} else {
goto no_second;
}
break;
case 0: /* 4.5 */
+ state->detected_std = V4L2_STD_MN;
default:
no_second:
state->second = msp3400c_carrier_detect_main[max1].cdo;
@@ -662,6 +699,7 @@
int val, i, std, count;
v4l_dbg(1, msp_debug, client, "msp3410 daemon started\n");
+ state->detected_std = V4L2_STD_ALL;
set_freezable();
for (;;) {
v4l_dbg(2, msp_debug, client, "msp3410 thread: sleep\n");
@@ -743,6 +781,8 @@
msp_stdlist[8].name : "unknown", val);
state->std = val = 0x0009;
msp_write_dem(client, 0x20, val);
+ } else {
+ state->detected_std = msp_standard_std(state->std);
}
/* set stereo */
@@ -957,6 +997,7 @@
int val, i;
v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n");
+ state->detected_std = V4L2_STD_ALL;
set_freezable();
for (;;) {
v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n");
@@ -1013,6 +1054,7 @@
v4l_dbg(1, msp_debug, client,
"detected standard: %s (0x%04x)\n",
msp_standard_std_name(state->std), state->std);
+ state->detected_std = msp_standard_std(state->std);
if (state->std == 9) {
/* AM NICAM mode */
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index a357aa8..07af26e 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -184,6 +184,7 @@
struct mutex power_lock; /* lock to protect power_count */
int power_count;
const struct mt9m111_datafmt *fmt;
+ int lastpage; /* PageMap cache value */
unsigned int gain;
unsigned char autoexposure;
unsigned char datawidth;
@@ -202,17 +203,17 @@
{
int ret;
u16 page;
- static int lastpage = -1; /* PageMap cache value */
+ struct mt9m111 *mt9m111 = to_mt9m111(client);
page = (reg >> 8);
- if (page == lastpage)
+ if (page == mt9m111->lastpage)
return 0;
if (page > 2)
return -EINVAL;
ret = i2c_smbus_write_word_data(client, MT9M111_PAGE_MAP, swab16(page));
if (!ret)
- lastpage = page;
+ mt9m111->lastpage = page;
return ret;
}
@@ -932,6 +933,8 @@
BUG_ON(!icd->parent ||
to_soc_camera_host(icd->parent)->nr != icd->iface);
+ mt9m111->lastpage = -1;
+
mt9m111->autoexposure = 1;
mt9m111->autowhitebalance = 1;
diff --git a/drivers/media/video/mt9p031.c b/drivers/media/video/mt9p031.c
new file mode 100644
index 0000000..73c0689
--- /dev/null
+++ b/drivers/media/video/mt9p031.c
@@ -0,0 +1,964 @@
+/*
+ * Driver for MT9P031 CMOS Image Sensor from Aptina
+ *
+ * Copyright (C) 2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Copyright (C) 2011, Javier Martin <javier.martin@vista-silicon.com>
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * Based on the MT9V032 driver and Bastian Hecht's code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/log2.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <media/v4l2-subdev.h>
+#include <linux/videodev2.h>
+
+#include <media/mt9p031.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#define MT9P031_PIXEL_ARRAY_WIDTH 2752
+#define MT9P031_PIXEL_ARRAY_HEIGHT 2004
+
+#define MT9P031_CHIP_VERSION 0x00
+#define MT9P031_CHIP_VERSION_VALUE 0x1801
+#define MT9P031_ROW_START 0x01
+#define MT9P031_ROW_START_MIN 0
+#define MT9P031_ROW_START_MAX 2004
+#define MT9P031_ROW_START_DEF 54
+#define MT9P031_COLUMN_START 0x02
+#define MT9P031_COLUMN_START_MIN 0
+#define MT9P031_COLUMN_START_MAX 2750
+#define MT9P031_COLUMN_START_DEF 16
+#define MT9P031_WINDOW_HEIGHT 0x03
+#define MT9P031_WINDOW_HEIGHT_MIN 2
+#define MT9P031_WINDOW_HEIGHT_MAX 2006
+#define MT9P031_WINDOW_HEIGHT_DEF 1944
+#define MT9P031_WINDOW_WIDTH 0x04
+#define MT9P031_WINDOW_WIDTH_MIN 2
+#define MT9P031_WINDOW_WIDTH_MAX 2752
+#define MT9P031_WINDOW_WIDTH_DEF 2592
+#define MT9P031_HORIZONTAL_BLANK 0x05
+#define MT9P031_HORIZONTAL_BLANK_MIN 0
+#define MT9P031_HORIZONTAL_BLANK_MAX 4095
+#define MT9P031_VERTICAL_BLANK 0x06
+#define MT9P031_VERTICAL_BLANK_MIN 0
+#define MT9P031_VERTICAL_BLANK_MAX 4095
+#define MT9P031_VERTICAL_BLANK_DEF 25
+#define MT9P031_OUTPUT_CONTROL 0x07
+#define MT9P031_OUTPUT_CONTROL_CEN 2
+#define MT9P031_OUTPUT_CONTROL_SYN 1
+#define MT9P031_OUTPUT_CONTROL_DEF 0x1f82
+#define MT9P031_SHUTTER_WIDTH_UPPER 0x08
+#define MT9P031_SHUTTER_WIDTH_LOWER 0x09
+#define MT9P031_SHUTTER_WIDTH_MIN 1
+#define MT9P031_SHUTTER_WIDTH_MAX 1048575
+#define MT9P031_SHUTTER_WIDTH_DEF 1943
+#define MT9P031_PLL_CONTROL 0x10
+#define MT9P031_PLL_CONTROL_PWROFF 0x0050
+#define MT9P031_PLL_CONTROL_PWRON 0x0051
+#define MT9P031_PLL_CONTROL_USEPLL 0x0052
+#define MT9P031_PLL_CONFIG_1 0x11
+#define MT9P031_PLL_CONFIG_2 0x12
+#define MT9P031_PIXEL_CLOCK_CONTROL 0x0a
+#define MT9P031_FRAME_RESTART 0x0b
+#define MT9P031_SHUTTER_DELAY 0x0c
+#define MT9P031_RST 0x0d
+#define MT9P031_RST_ENABLE 1
+#define MT9P031_RST_DISABLE 0
+#define MT9P031_READ_MODE_1 0x1e
+#define MT9P031_READ_MODE_2 0x20
+#define MT9P031_READ_MODE_2_ROW_MIR (1 << 15)
+#define MT9P031_READ_MODE_2_COL_MIR (1 << 14)
+#define MT9P031_READ_MODE_2_ROW_BLC (1 << 6)
+#define MT9P031_ROW_ADDRESS_MODE 0x22
+#define MT9P031_COLUMN_ADDRESS_MODE 0x23
+#define MT9P031_GLOBAL_GAIN 0x35
+#define MT9P031_GLOBAL_GAIN_MIN 8
+#define MT9P031_GLOBAL_GAIN_MAX 1024
+#define MT9P031_GLOBAL_GAIN_DEF 8
+#define MT9P031_GLOBAL_GAIN_MULT (1 << 6)
+#define MT9P031_ROW_BLACK_DEF_OFFSET 0x4b
+#define MT9P031_TEST_PATTERN 0xa0
+#define MT9P031_TEST_PATTERN_SHIFT 3
+#define MT9P031_TEST_PATTERN_ENABLE (1 << 0)
+#define MT9P031_TEST_PATTERN_DISABLE (0 << 0)
+#define MT9P031_TEST_PATTERN_GREEN 0xa1
+#define MT9P031_TEST_PATTERN_RED 0xa2
+#define MT9P031_TEST_PATTERN_BLUE 0xa3
+
+struct mt9p031_pll_divs {
+ u32 ext_freq;
+ u32 target_freq;
+ u8 m;
+ u8 n;
+ u8 p1;
+};
+
+struct mt9p031 {
+ struct v4l2_subdev subdev;
+ struct media_pad pad;
+ struct v4l2_rect crop; /* Sensor window */
+ struct v4l2_mbus_framefmt format;
+ struct v4l2_ctrl_handler ctrls;
+ struct mt9p031_platform_data *pdata;
+ struct mutex power_lock; /* lock to protect power_count */
+ int power_count;
+ u16 xskip;
+ u16 yskip;
+
+ const struct mt9p031_pll_divs *pll;
+
+ /* Registers cache */
+ u16 output_control;
+ u16 mode2;
+};
+
+static struct mt9p031 *to_mt9p031(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct mt9p031, subdev);
+}
+
+static int mt9p031_read(struct i2c_client *client, u8 reg)
+{
+ s32 data = i2c_smbus_read_word_data(client, reg);
+ return data < 0 ? data : be16_to_cpu(data);
+}
+
+static int mt9p031_write(struct i2c_client *client, u8 reg, u16 data)
+{
+ return i2c_smbus_write_word_data(client, reg, cpu_to_be16(data));
+}
+
+static int mt9p031_set_output_control(struct mt9p031 *mt9p031, u16 clear,
+ u16 set)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ u16 value = (mt9p031->output_control & ~clear) | set;
+ int ret;
+
+ ret = mt9p031_write(client, MT9P031_OUTPUT_CONTROL, value);
+ if (ret < 0)
+ return ret;
+
+ mt9p031->output_control = value;
+ return 0;
+}
+
+static int mt9p031_set_mode2(struct mt9p031 *mt9p031, u16 clear, u16 set)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ u16 value = (mt9p031->mode2 & ~clear) | set;
+ int ret;
+
+ ret = mt9p031_write(client, MT9P031_READ_MODE_2, value);
+ if (ret < 0)
+ return ret;
+
+ mt9p031->mode2 = value;
+ return 0;
+}
+
+static int mt9p031_reset(struct mt9p031 *mt9p031)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ int ret;
+
+ /* Disable chip output, synchronous option update */
+ ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_ENABLE);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_DISABLE);
+ if (ret < 0)
+ return ret;
+
+ return mt9p031_set_output_control(mt9p031, MT9P031_OUTPUT_CONTROL_CEN,
+ 0);
+}
+
+/*
+ * This static table uses ext_freq and vdd_io values to select suitable
+ * PLL dividers m, n and p1 which have been calculated as specifiec in p36
+ * of Aptina's mt9p031 datasheet. New values should be added here.
+ */
+static const struct mt9p031_pll_divs mt9p031_divs[] = {
+ /* ext_freq target_freq m n p1 */
+ {21000000, 48000000, 26, 2, 6}
+};
+
+static int mt9p031_pll_get_divs(struct mt9p031 *mt9p031)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mt9p031_divs); i++) {
+ if (mt9p031_divs[i].ext_freq == mt9p031->pdata->ext_freq &&
+ mt9p031_divs[i].target_freq == mt9p031->pdata->target_freq) {
+ mt9p031->pll = &mt9p031_divs[i];
+ return 0;
+ }
+ }
+
+ dev_err(&client->dev, "Couldn't find PLL dividers for ext_freq = %d, "
+ "target_freq = %d\n", mt9p031->pdata->ext_freq,
+ mt9p031->pdata->target_freq);
+ return -EINVAL;
+}
+
+static int mt9p031_pll_enable(struct mt9p031 *mt9p031)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ int ret;
+
+ ret = mt9p031_write(client, MT9P031_PLL_CONTROL,
+ MT9P031_PLL_CONTROL_PWRON);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9p031_write(client, MT9P031_PLL_CONFIG_1,
+ (mt9p031->pll->m << 8) | (mt9p031->pll->n - 1));
+ if (ret < 0)
+ return ret;
+
+ ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll->p1 - 1);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(1000, 2000);
+ ret = mt9p031_write(client, MT9P031_PLL_CONTROL,
+ MT9P031_PLL_CONTROL_PWRON |
+ MT9P031_PLL_CONTROL_USEPLL);
+ return ret;
+}
+
+static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+
+ return mt9p031_write(client, MT9P031_PLL_CONTROL,
+ MT9P031_PLL_CONTROL_PWROFF);
+}
+
+static int mt9p031_power_on(struct mt9p031 *mt9p031)
+{
+ /* Ensure RESET_BAR is low */
+ if (mt9p031->pdata->reset) {
+ mt9p031->pdata->reset(&mt9p031->subdev, 1);
+ usleep_range(1000, 2000);
+ }
+
+ /* Emable clock */
+ if (mt9p031->pdata->set_xclk)
+ mt9p031->pdata->set_xclk(&mt9p031->subdev,
+ mt9p031->pdata->ext_freq);
+
+ /* Now RESET_BAR must be high */
+ if (mt9p031->pdata->reset) {
+ mt9p031->pdata->reset(&mt9p031->subdev, 0);
+ usleep_range(1000, 2000);
+ }
+
+ return 0;
+}
+
+static void mt9p031_power_off(struct mt9p031 *mt9p031)
+{
+ if (mt9p031->pdata->reset) {
+ mt9p031->pdata->reset(&mt9p031->subdev, 1);
+ usleep_range(1000, 2000);
+ }
+
+ if (mt9p031->pdata->set_xclk)
+ mt9p031->pdata->set_xclk(&mt9p031->subdev, 0);
+}
+
+static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ int ret;
+
+ if (!on) {
+ mt9p031_power_off(mt9p031);
+ return 0;
+ }
+
+ ret = mt9p031_power_on(mt9p031);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9p031_reset(mt9p031);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to reset the camera\n");
+ return ret;
+ }
+
+ return v4l2_ctrl_handler_setup(&mt9p031->ctrls);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev video operations
+ */
+
+static int mt9p031_set_params(struct mt9p031 *mt9p031)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ struct v4l2_mbus_framefmt *format = &mt9p031->format;
+ const struct v4l2_rect *crop = &mt9p031->crop;
+ unsigned int hblank;
+ unsigned int vblank;
+ unsigned int xskip;
+ unsigned int yskip;
+ unsigned int xbin;
+ unsigned int ybin;
+ int ret;
+
+ /* Windows position and size.
+ *
+ * TODO: Make sure the start coordinates and window size match the
+ * skipping, binning and mirroring (see description of registers 2 and 4
+ * in table 13, and Binning section on page 41).
+ */
+ ret = mt9p031_write(client, MT9P031_COLUMN_START, crop->left);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_ROW_START, crop->top);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_WINDOW_WIDTH, crop->width - 1);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_WINDOW_HEIGHT, crop->height - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Row and column binning and skipping. Use the maximum binning value
+ * compatible with the skipping settings.
+ */
+ xskip = DIV_ROUND_CLOSEST(crop->width, format->width);
+ yskip = DIV_ROUND_CLOSEST(crop->height, format->height);
+ xbin = 1 << (ffs(xskip) - 1);
+ ybin = 1 << (ffs(yskip) - 1);
+
+ ret = mt9p031_write(client, MT9P031_COLUMN_ADDRESS_MODE,
+ ((xbin - 1) << 4) | (xskip - 1));
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_ROW_ADDRESS_MODE,
+ ((ybin - 1) << 4) | (yskip - 1));
+ if (ret < 0)
+ return ret;
+
+ /* Blanking - use minimum value for horizontal blanking and default
+ * value for vertical blanking.
+ */
+ hblank = 346 * ybin + 64 + (80 >> max_t(unsigned int, xbin, 3));
+ vblank = MT9P031_VERTICAL_BLANK_DEF;
+
+ ret = mt9p031_write(client, MT9P031_HORIZONTAL_BLANK, hblank);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_VERTICAL_BLANK, vblank);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ int ret;
+
+ if (!enable) {
+ /* Stop sensor readout */
+ ret = mt9p031_set_output_control(mt9p031,
+ MT9P031_OUTPUT_CONTROL_CEN, 0);
+ if (ret < 0)
+ return ret;
+
+ return mt9p031_pll_disable(mt9p031);
+ }
+
+ ret = mt9p031_set_params(mt9p031);
+ if (ret < 0)
+ return ret;
+
+ /* Switch to master "normal" mode */
+ ret = mt9p031_set_output_control(mt9p031, 0,
+ MT9P031_OUTPUT_CONTROL_CEN);
+ if (ret < 0)
+ return ret;
+
+ return mt9p031_pll_enable(mt9p031);
+}
+
+static int mt9p031_enum_mbus_code(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+
+ if (code->pad || code->index)
+ return -EINVAL;
+
+ code->code = mt9p031->format.code;
+ return 0;
+}
+
+static int mt9p031_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+
+ if (fse->index >= 8 || fse->code != mt9p031->format.code)
+ return -EINVAL;
+
+ fse->min_width = MT9P031_WINDOW_WIDTH_DEF
+ / min_t(unsigned int, 7, fse->index + 1);
+ fse->max_width = fse->min_width;
+ fse->min_height = MT9P031_WINDOW_HEIGHT_DEF / (fse->index + 1);
+ fse->max_height = fse->min_height;
+
+ return 0;
+}
+
+static struct v4l2_mbus_framefmt *
+__mt9p031_get_pad_format(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh,
+ unsigned int pad, u32 which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(fh, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &mt9p031->format;
+ default:
+ return NULL;
+ }
+}
+
+static struct v4l2_rect *
+__mt9p031_get_pad_crop(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh,
+ unsigned int pad, u32 which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(fh, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &mt9p031->crop;
+ default:
+ return NULL;
+ }
+}
+
+static int mt9p031_get_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+
+ fmt->format = *__mt9p031_get_pad_format(mt9p031, fh, fmt->pad,
+ fmt->which);
+ return 0;
+}
+
+static int mt9p031_set_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *format)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ struct v4l2_mbus_framefmt *__format;
+ struct v4l2_rect *__crop;
+ unsigned int width;
+ unsigned int height;
+ unsigned int hratio;
+ unsigned int vratio;
+
+ __crop = __mt9p031_get_pad_crop(mt9p031, fh, format->pad,
+ format->which);
+
+ /* Clamp the width and height to avoid dividing by zero. */
+ width = clamp_t(unsigned int, ALIGN(format->format.width, 2),
+ max(__crop->width / 7, MT9P031_WINDOW_WIDTH_MIN),
+ __crop->width);
+ height = clamp_t(unsigned int, ALIGN(format->format.height, 2),
+ max(__crop->height / 8, MT9P031_WINDOW_HEIGHT_MIN),
+ __crop->height);
+
+ hratio = DIV_ROUND_CLOSEST(__crop->width, width);
+ vratio = DIV_ROUND_CLOSEST(__crop->height, height);
+
+ __format = __mt9p031_get_pad_format(mt9p031, fh, format->pad,
+ format->which);
+ __format->width = __crop->width / hratio;
+ __format->height = __crop->height / vratio;
+
+ format->format = *__format;
+
+ return 0;
+}
+
+static int mt9p031_get_crop(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+
+ crop->rect = *__mt9p031_get_pad_crop(mt9p031, fh, crop->pad,
+ crop->which);
+ return 0;
+}
+
+static int mt9p031_set_crop(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ struct v4l2_mbus_framefmt *__format;
+ struct v4l2_rect *__crop;
+ struct v4l2_rect rect;
+
+ /* Clamp the crop rectangle boundaries and align them to a multiple of 2
+ * pixels to ensure a GRBG Bayer pattern.
+ */
+ rect.left = clamp(ALIGN(crop->rect.left, 2), MT9P031_COLUMN_START_MIN,
+ MT9P031_COLUMN_START_MAX);
+ rect.top = clamp(ALIGN(crop->rect.top, 2), MT9P031_ROW_START_MIN,
+ MT9P031_ROW_START_MAX);
+ rect.width = clamp(ALIGN(crop->rect.width, 2),
+ MT9P031_WINDOW_WIDTH_MIN,
+ MT9P031_WINDOW_WIDTH_MAX);
+ rect.height = clamp(ALIGN(crop->rect.height, 2),
+ MT9P031_WINDOW_HEIGHT_MIN,
+ MT9P031_WINDOW_HEIGHT_MAX);
+
+ rect.width = min(rect.width, MT9P031_PIXEL_ARRAY_WIDTH - rect.left);
+ rect.height = min(rect.height, MT9P031_PIXEL_ARRAY_HEIGHT - rect.top);
+
+ __crop = __mt9p031_get_pad_crop(mt9p031, fh, crop->pad, crop->which);
+
+ if (rect.width != __crop->width || rect.height != __crop->height) {
+ /* Reset the output image size if the crop rectangle size has
+ * been modified.
+ */
+ __format = __mt9p031_get_pad_format(mt9p031, fh, crop->pad,
+ crop->which);
+ __format->width = rect.width;
+ __format->height = rect.height;
+ }
+
+ *__crop = rect;
+ crop->rect = rect;
+
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev control operations
+ */
+
+#define V4L2_CID_TEST_PATTERN (V4L2_CID_USER_BASE | 0x1001)
+
+static int mt9p031_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct mt9p031 *mt9p031 =
+ container_of(ctrl->handler, struct mt9p031, ctrls);
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ u16 data;
+ int ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_EXPOSURE:
+ ret = mt9p031_write(client, MT9P031_SHUTTER_WIDTH_UPPER,
+ (ctrl->val >> 16) & 0xffff);
+ if (ret < 0)
+ return ret;
+
+ return mt9p031_write(client, MT9P031_SHUTTER_WIDTH_LOWER,
+ ctrl->val & 0xffff);
+
+ case V4L2_CID_GAIN:
+ /* Gain is controlled by 2 analog stages and a digital stage.
+ * Valid values for the 3 stages are
+ *
+ * Stage Min Max Step
+ * ------------------------------------------
+ * First analog stage x1 x2 1
+ * Second analog stage x1 x4 0.125
+ * Digital stage x1 x16 0.125
+ *
+ * To minimize noise, the gain stages should be used in the
+ * second analog stage, first analog stage, digital stage order.
+ * Gain from a previous stage should be pushed to its maximum
+ * value before the next stage is used.
+ */
+ if (ctrl->val <= 32) {
+ data = ctrl->val;
+ } else if (ctrl->val <= 64) {
+ ctrl->val &= ~1;
+ data = (1 << 6) | (ctrl->val >> 1);
+ } else {
+ ctrl->val &= ~7;
+ data = ((ctrl->val - 64) << 5) | (1 << 6) | 32;
+ }
+
+ return mt9p031_write(client, MT9P031_GLOBAL_GAIN, data);
+
+ case V4L2_CID_HFLIP:
+ if (ctrl->val)
+ return mt9p031_set_mode2(mt9p031,
+ 0, MT9P031_READ_MODE_2_COL_MIR);
+ else
+ return mt9p031_set_mode2(mt9p031,
+ MT9P031_READ_MODE_2_COL_MIR, 0);
+
+ case V4L2_CID_VFLIP:
+ if (ctrl->val)
+ return mt9p031_set_mode2(mt9p031,
+ 0, MT9P031_READ_MODE_2_ROW_MIR);
+ else
+ return mt9p031_set_mode2(mt9p031,
+ MT9P031_READ_MODE_2_ROW_MIR, 0);
+
+ case V4L2_CID_TEST_PATTERN:
+ if (!ctrl->val) {
+ ret = mt9p031_set_mode2(mt9p031,
+ 0, MT9P031_READ_MODE_2_ROW_BLC);
+ if (ret < 0)
+ return ret;
+
+ return mt9p031_write(client, MT9P031_TEST_PATTERN,
+ MT9P031_TEST_PATTERN_DISABLE);
+ }
+
+ ret = mt9p031_write(client, MT9P031_TEST_PATTERN_GREEN, 0x05a0);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_TEST_PATTERN_RED, 0x0a50);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_TEST_PATTERN_BLUE, 0x0aa0);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9p031_set_mode2(mt9p031, MT9P031_READ_MODE_2_ROW_BLC,
+ 0);
+ if (ret < 0)
+ return ret;
+ ret = mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, 0);
+ if (ret < 0)
+ return ret;
+
+ return mt9p031_write(client, MT9P031_TEST_PATTERN,
+ ((ctrl->val - 1) << MT9P031_TEST_PATTERN_SHIFT)
+ | MT9P031_TEST_PATTERN_ENABLE);
+ }
+ return 0;
+}
+
+static struct v4l2_ctrl_ops mt9p031_ctrl_ops = {
+ .s_ctrl = mt9p031_s_ctrl,
+};
+
+static const char * const mt9p031_test_pattern_menu[] = {
+ "Disabled",
+ "Color Field",
+ "Horizontal Gradient",
+ "Vertical Gradient",
+ "Diagonal Gradient",
+ "Classic Test Pattern",
+ "Walking 1s",
+ "Monochrome Horizontal Bars",
+ "Monochrome Vertical Bars",
+ "Vertical Color Bars",
+};
+
+static const struct v4l2_ctrl_config mt9p031_ctrls[] = {
+ {
+ .ops = &mt9p031_ctrl_ops,
+ .id = V4L2_CID_TEST_PATTERN,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Test Pattern",
+ .min = 0,
+ .max = ARRAY_SIZE(mt9p031_test_pattern_menu) - 1,
+ .step = 0,
+ .def = 0,
+ .flags = 0,
+ .menu_skip_mask = 0,
+ .qmenu = mt9p031_test_pattern_menu,
+ }
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev core operations
+ */
+
+static int mt9p031_set_power(struct v4l2_subdev *subdev, int on)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ int ret = 0;
+
+ mutex_lock(&mt9p031->power_lock);
+
+ /* If the power count is modified from 0 to != 0 or from != 0 to 0,
+ * update the power state.
+ */
+ if (mt9p031->power_count == !on) {
+ ret = __mt9p031_set_power(mt9p031, !!on);
+ if (ret < 0)
+ goto out;
+ }
+
+ /* Update the power count. */
+ mt9p031->power_count += on ? 1 : -1;
+ WARN_ON(mt9p031->power_count < 0);
+
+out:
+ mutex_unlock(&mt9p031->power_lock);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev internal operations
+ */
+
+static int mt9p031_registered(struct v4l2_subdev *subdev)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ s32 data;
+ int ret;
+
+ ret = mt9p031_power_on(mt9p031);
+ if (ret < 0) {
+ dev_err(&client->dev, "MT9P031 power up failed\n");
+ return ret;
+ }
+
+ /* Read out the chip version register */
+ data = mt9p031_read(client, MT9P031_CHIP_VERSION);
+ if (data != MT9P031_CHIP_VERSION_VALUE) {
+ dev_err(&client->dev, "MT9P031 not detected, wrong version "
+ "0x%04x\n", data);
+ return -ENODEV;
+ }
+
+ mt9p031_power_off(mt9p031);
+
+ dev_info(&client->dev, "MT9P031 detected at address 0x%02x\n",
+ client->addr);
+
+ return ret;
+}
+
+static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
+{
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *crop;
+
+ crop = v4l2_subdev_get_try_crop(fh, 0);
+ crop->left = MT9P031_COLUMN_START_DEF;
+ crop->top = MT9P031_ROW_START_DEF;
+ crop->width = MT9P031_WINDOW_WIDTH_DEF;
+ crop->height = MT9P031_WINDOW_HEIGHT_DEF;
+
+ format = v4l2_subdev_get_try_format(fh, 0);
+
+ if (mt9p031->pdata->version == MT9P031_MONOCHROME_VERSION)
+ format->code = V4L2_MBUS_FMT_Y12_1X12;
+ else
+ format->code = V4L2_MBUS_FMT_SGRBG12_1X12;
+
+ format->width = MT9P031_WINDOW_WIDTH_DEF;
+ format->height = MT9P031_WINDOW_HEIGHT_DEF;
+ format->field = V4L2_FIELD_NONE;
+ format->colorspace = V4L2_COLORSPACE_SRGB;
+
+ mt9p031->xskip = 1;
+ mt9p031->yskip = 1;
+ return mt9p031_set_power(subdev, 1);
+}
+
+static int mt9p031_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
+{
+ return mt9p031_set_power(subdev, 0);
+}
+
+static struct v4l2_subdev_core_ops mt9p031_subdev_core_ops = {
+ .s_power = mt9p031_set_power,
+};
+
+static struct v4l2_subdev_video_ops mt9p031_subdev_video_ops = {
+ .s_stream = mt9p031_s_stream,
+};
+
+static struct v4l2_subdev_pad_ops mt9p031_subdev_pad_ops = {
+ .enum_mbus_code = mt9p031_enum_mbus_code,
+ .enum_frame_size = mt9p031_enum_frame_size,
+ .get_fmt = mt9p031_get_format,
+ .set_fmt = mt9p031_set_format,
+ .get_crop = mt9p031_get_crop,
+ .set_crop = mt9p031_set_crop,
+};
+
+static struct v4l2_subdev_ops mt9p031_subdev_ops = {
+ .core = &mt9p031_subdev_core_ops,
+ .video = &mt9p031_subdev_video_ops,
+ .pad = &mt9p031_subdev_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = {
+ .registered = mt9p031_registered,
+ .open = mt9p031_open,
+ .close = mt9p031_close,
+};
+
+/* -----------------------------------------------------------------------------
+ * Driver initialization and probing
+ */
+
+static int mt9p031_probe(struct i2c_client *client,
+ const struct i2c_device_id *did)
+{
+ struct mt9p031_platform_data *pdata = client->dev.platform_data;
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct mt9p031 *mt9p031;
+ unsigned int i;
+ int ret;
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_warn(&client->dev,
+ "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
+ return -EIO;
+ }
+
+ mt9p031 = kzalloc(sizeof(*mt9p031), GFP_KERNEL);
+ if (mt9p031 == NULL)
+ return -ENOMEM;
+
+ mt9p031->pdata = pdata;
+ mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF;
+ mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC;
+
+ v4l2_ctrl_handler_init(&mt9p031->ctrls, ARRAY_SIZE(mt9p031_ctrls) + 4);
+
+ v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
+ V4L2_CID_EXPOSURE, MT9P031_SHUTTER_WIDTH_MIN,
+ MT9P031_SHUTTER_WIDTH_MAX, 1,
+ MT9P031_SHUTTER_WIDTH_DEF);
+ v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
+ V4L2_CID_GAIN, MT9P031_GLOBAL_GAIN_MIN,
+ MT9P031_GLOBAL_GAIN_MAX, 1, MT9P031_GLOBAL_GAIN_DEF);
+ v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+ for (i = 0; i < ARRAY_SIZE(mt9p031_ctrls); ++i)
+ v4l2_ctrl_new_custom(&mt9p031->ctrls, &mt9p031_ctrls[i], NULL);
+
+ mt9p031->subdev.ctrl_handler = &mt9p031->ctrls;
+
+ if (mt9p031->ctrls.error)
+ printk(KERN_INFO "%s: control initialization error %d\n",
+ __func__, mt9p031->ctrls.error);
+
+ mutex_init(&mt9p031->power_lock);
+ v4l2_i2c_subdev_init(&mt9p031->subdev, client, &mt9p031_subdev_ops);
+ mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops;
+
+ mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad, 0);
+ if (ret < 0)
+ goto done;
+
+ mt9p031->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ mt9p031->crop.width = MT9P031_WINDOW_WIDTH_DEF;
+ mt9p031->crop.height = MT9P031_WINDOW_HEIGHT_DEF;
+ mt9p031->crop.left = MT9P031_COLUMN_START_DEF;
+ mt9p031->crop.top = MT9P031_ROW_START_DEF;
+
+ if (mt9p031->pdata->version == MT9P031_MONOCHROME_VERSION)
+ mt9p031->format.code = V4L2_MBUS_FMT_Y12_1X12;
+ else
+ mt9p031->format.code = V4L2_MBUS_FMT_SGRBG12_1X12;
+
+ mt9p031->format.width = MT9P031_WINDOW_WIDTH_DEF;
+ mt9p031->format.height = MT9P031_WINDOW_HEIGHT_DEF;
+ mt9p031->format.field = V4L2_FIELD_NONE;
+ mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB;
+
+ ret = mt9p031_pll_get_divs(mt9p031);
+
+done:
+ if (ret < 0) {
+ v4l2_ctrl_handler_free(&mt9p031->ctrls);
+ media_entity_cleanup(&mt9p031->subdev.entity);
+ kfree(mt9p031);
+ }
+
+ return ret;
+}
+
+static int mt9p031_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+
+ v4l2_ctrl_handler_free(&mt9p031->ctrls);
+ v4l2_device_unregister_subdev(subdev);
+ media_entity_cleanup(&subdev->entity);
+ kfree(mt9p031);
+
+ return 0;
+}
+
+static const struct i2c_device_id mt9p031_id[] = {
+ { "mt9p031", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mt9p031_id);
+
+static struct i2c_driver mt9p031_i2c_driver = {
+ .driver = {
+ .name = "mt9p031",
+ },
+ .probe = mt9p031_probe,
+ .remove = mt9p031_remove,
+ .id_table = mt9p031_id,
+};
+
+static int __init mt9p031_mod_init(void)
+{
+ return i2c_add_driver(&mt9p031_i2c_driver);
+}
+
+static void __exit mt9p031_mod_exit(void)
+{
+ i2c_del_driver(&mt9p031_i2c_driver);
+}
+
+module_init(mt9p031_mod_init);
+module_exit(mt9p031_mod_exit);
+
+MODULE_DESCRIPTION("Aptina MT9P031 Camera driver");
+MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/mt9t001.c b/drivers/media/video/mt9t001.c
new file mode 100644
index 0000000..08074b8
--- /dev/null
+++ b/drivers/media/video/mt9t001.c
@@ -0,0 +1,836 @@
+/*
+ * Driver for MT9T001 CMOS Image Sensor from Aptina (Micron)
+ *
+ * Copyright (C) 2010-2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on the MT9M001 driver,
+ *
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/v4l2-mediabus.h>
+
+#include <media/mt9t001.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#define MT9T001_PIXEL_ARRAY_HEIGHT 1568
+#define MT9T001_PIXEL_ARRAY_WIDTH 2112
+
+#define MT9T001_CHIP_VERSION 0x00
+#define MT9T001_CHIP_ID 0x1621
+#define MT9T001_ROW_START 0x01
+#define MT9T001_ROW_START_MIN 0
+#define MT9T001_ROW_START_DEF 20
+#define MT9T001_ROW_START_MAX 1534
+#define MT9T001_COLUMN_START 0x02
+#define MT9T001_COLUMN_START_MIN 0
+#define MT9T001_COLUMN_START_DEF 32
+#define MT9T001_COLUMN_START_MAX 2046
+#define MT9T001_WINDOW_HEIGHT 0x03
+#define MT9T001_WINDOW_HEIGHT_MIN 1
+#define MT9T001_WINDOW_HEIGHT_DEF 1535
+#define MT9T001_WINDOW_HEIGHT_MAX 1567
+#define MT9T001_WINDOW_WIDTH 0x04
+#define MT9T001_WINDOW_WIDTH_MIN 1
+#define MT9T001_WINDOW_WIDTH_DEF 2047
+#define MT9T001_WINDOW_WIDTH_MAX 2111
+#define MT9T001_HORIZONTAL_BLANKING 0x05
+#define MT9T001_HORIZONTAL_BLANKING_MIN 21
+#define MT9T001_HORIZONTAL_BLANKING_MAX 1023
+#define MT9T001_VERTICAL_BLANKING 0x06
+#define MT9T001_VERTICAL_BLANKING_MIN 3
+#define MT9T001_VERTICAL_BLANKING_MAX 1023
+#define MT9T001_OUTPUT_CONTROL 0x07
+#define MT9T001_OUTPUT_CONTROL_SYNC (1 << 0)
+#define MT9T001_OUTPUT_CONTROL_CHIP_ENABLE (1 << 1)
+#define MT9T001_OUTPUT_CONTROL_TEST_DATA (1 << 6)
+#define MT9T001_SHUTTER_WIDTH_HIGH 0x08
+#define MT9T001_SHUTTER_WIDTH_LOW 0x09
+#define MT9T001_SHUTTER_WIDTH_MIN 1
+#define MT9T001_SHUTTER_WIDTH_DEF 1561
+#define MT9T001_SHUTTER_WIDTH_MAX (1024 * 1024)
+#define MT9T001_PIXEL_CLOCK 0x0a
+#define MT9T001_PIXEL_CLOCK_INVERT (1 << 15)
+#define MT9T001_PIXEL_CLOCK_SHIFT_MASK (7 << 8)
+#define MT9T001_PIXEL_CLOCK_SHIFT_SHIFT 8
+#define MT9T001_PIXEL_CLOCK_DIVIDE_MASK (0x7f << 0)
+#define MT9T001_FRAME_RESTART 0x0b
+#define MT9T001_SHUTTER_DELAY 0x0c
+#define MT9T001_SHUTTER_DELAY_MAX 2047
+#define MT9T001_RESET 0x0d
+#define MT9T001_READ_MODE1 0x1e
+#define MT9T001_READ_MODE_SNAPSHOT (1 << 8)
+#define MT9T001_READ_MODE_STROBE_ENABLE (1 << 9)
+#define MT9T001_READ_MODE_STROBE_WIDTH (1 << 10)
+#define MT9T001_READ_MODE_STROBE_OVERRIDE (1 << 11)
+#define MT9T001_READ_MODE2 0x20
+#define MT9T001_READ_MODE_BAD_FRAMES (1 << 0)
+#define MT9T001_READ_MODE_LINE_VALID_CONTINUOUS (1 << 9)
+#define MT9T001_READ_MODE_LINE_VALID_FRAME (1 << 10)
+#define MT9T001_READ_MODE3 0x21
+#define MT9T001_READ_MODE_GLOBAL_RESET (1 << 0)
+#define MT9T001_READ_MODE_GHST_CTL (1 << 1)
+#define MT9T001_ROW_ADDRESS_MODE 0x22
+#define MT9T001_ROW_SKIP_MASK (7 << 0)
+#define MT9T001_ROW_BIN_MASK (3 << 3)
+#define MT9T001_ROW_BIN_SHIFT 3
+#define MT9T001_COLUMN_ADDRESS_MODE 0x23
+#define MT9T001_COLUMN_SKIP_MASK (7 << 0)
+#define MT9T001_COLUMN_BIN_MASK (3 << 3)
+#define MT9T001_COLUMN_BIN_SHIFT 3
+#define MT9T001_GREEN1_GAIN 0x2b
+#define MT9T001_BLUE_GAIN 0x2c
+#define MT9T001_RED_GAIN 0x2d
+#define MT9T001_GREEN2_GAIN 0x2e
+#define MT9T001_TEST_DATA 0x32
+#define MT9T001_GLOBAL_GAIN 0x35
+#define MT9T001_GLOBAL_GAIN_MIN 8
+#define MT9T001_GLOBAL_GAIN_MAX 1024
+#define MT9T001_BLACK_LEVEL 0x49
+#define MT9T001_ROW_BLACK_DEFAULT_OFFSET 0x4b
+#define MT9T001_BLC_DELTA_THRESHOLDS 0x5d
+#define MT9T001_CAL_THRESHOLDS 0x5f
+#define MT9T001_GREEN1_OFFSET 0x60
+#define MT9T001_GREEN2_OFFSET 0x61
+#define MT9T001_BLACK_LEVEL_CALIBRATION 0x62
+#define MT9T001_BLACK_LEVEL_OVERRIDE (1 << 0)
+#define MT9T001_BLACK_LEVEL_DISABLE_OFFSET (1 << 1)
+#define MT9T001_BLACK_LEVEL_RECALCULATE (1 << 12)
+#define MT9T001_BLACK_LEVEL_LOCK_RED_BLUE (1 << 13)
+#define MT9T001_BLACK_LEVEL_LOCK_GREEN (1 << 14)
+#define MT9T001_RED_OFFSET 0x63
+#define MT9T001_BLUE_OFFSET 0x64
+
+struct mt9t001 {
+ struct v4l2_subdev subdev;
+ struct media_pad pad;
+
+ struct v4l2_mbus_framefmt format;
+ struct v4l2_rect crop;
+
+ struct v4l2_ctrl_handler ctrls;
+ struct v4l2_ctrl *gains[4];
+
+ u16 output_control;
+ u16 black_level;
+};
+
+static inline struct mt9t001 *to_mt9t001(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct mt9t001, subdev);
+}
+
+static int mt9t001_read(struct i2c_client *client, u8 reg)
+{
+ s32 data = i2c_smbus_read_word_data(client, reg);
+ return data < 0 ? data : be16_to_cpu(data);
+}
+
+static int mt9t001_write(struct i2c_client *client, u8 reg, u16 data)
+{
+ return i2c_smbus_write_word_data(client, reg, cpu_to_be16(data));
+}
+
+static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear,
+ u16 set)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
+ u16 value = (mt9t001->output_control & ~clear) | set;
+ int ret;
+
+ if (value == mt9t001->output_control)
+ return 0;
+
+ ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, value);
+ if (ret < 0)
+ return ret;
+
+ mt9t001->output_control = value;
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev video operations
+ */
+
+static struct v4l2_mbus_framefmt *
+__mt9t001_get_pad_format(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(fh, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &mt9t001->format;
+ default:
+ return NULL;
+ }
+}
+
+static struct v4l2_rect *
+__mt9t001_get_pad_crop(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(fh, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &mt9t001->crop;
+ default:
+ return NULL;
+ }
+}
+
+static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+ const u16 mode = MT9T001_OUTPUT_CONTROL_CHIP_ENABLE;
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+ struct v4l2_mbus_framefmt *format = &mt9t001->format;
+ struct v4l2_rect *crop = &mt9t001->crop;
+ unsigned int hratio;
+ unsigned int vratio;
+ int ret;
+
+ if (!enable)
+ return mt9t001_set_output_control(mt9t001, mode, 0);
+
+ /* Configure the window size and row/column bin */
+ hratio = DIV_ROUND_CLOSEST(crop->width, format->width);
+ vratio = DIV_ROUND_CLOSEST(crop->height, format->height);
+
+ ret = mt9t001_write(client, MT9T001_ROW_ADDRESS_MODE, hratio - 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_COLUMN_ADDRESS_MODE, vratio - 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_COLUMN_START, crop->left);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_ROW_START, crop->top);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_WINDOW_WIDTH, crop->width - 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_WINDOW_HEIGHT, crop->height - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Switch to master "normal" mode */
+ return mt9t001_set_output_control(mt9t001, 0, mode);
+}
+
+static int mt9t001_enum_mbus_code(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+ return 0;
+}
+
+static int mt9t001_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->index >= 8 || fse->code != V4L2_MBUS_FMT_SGRBG10_1X10)
+ return -EINVAL;
+
+ fse->min_width = (MT9T001_WINDOW_WIDTH_DEF + 1) / fse->index;
+ fse->max_width = fse->min_width;
+ fse->min_height = (MT9T001_WINDOW_HEIGHT_DEF + 1) / fse->index;
+ fse->max_height = fse->min_height;
+
+ return 0;
+}
+
+static int mt9t001_get_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *format)
+{
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+
+ format->format = *__mt9t001_get_pad_format(mt9t001, fh, format->pad,
+ format->which);
+ return 0;
+}
+
+static int mt9t001_set_format(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *format)
+{
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+ struct v4l2_mbus_framefmt *__format;
+ struct v4l2_rect *__crop;
+ unsigned int width;
+ unsigned int height;
+ unsigned int hratio;
+ unsigned int vratio;
+
+ __crop = __mt9t001_get_pad_crop(mt9t001, fh, format->pad,
+ format->which);
+
+ /* Clamp the width and height to avoid dividing by zero. */
+ width = clamp_t(unsigned int, ALIGN(format->format.width, 2),
+ max(__crop->width / 8, MT9T001_WINDOW_HEIGHT_MIN + 1),
+ __crop->width);
+ height = clamp_t(unsigned int, ALIGN(format->format.height, 2),
+ max(__crop->height / 8, MT9T001_WINDOW_HEIGHT_MIN + 1),
+ __crop->height);
+
+ hratio = DIV_ROUND_CLOSEST(__crop->width, width);
+ vratio = DIV_ROUND_CLOSEST(__crop->height, height);
+
+ __format = __mt9t001_get_pad_format(mt9t001, fh, format->pad,
+ format->which);
+ __format->width = __crop->width / hratio;
+ __format->height = __crop->height / vratio;
+
+ format->format = *__format;
+
+ return 0;
+}
+
+static int mt9t001_get_crop(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+
+ crop->rect = *__mt9t001_get_pad_crop(mt9t001, fh, crop->pad,
+ crop->which);
+ return 0;
+}
+
+static int mt9t001_set_crop(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+ struct v4l2_mbus_framefmt *__format;
+ struct v4l2_rect *__crop;
+ struct v4l2_rect rect;
+
+ /* Clamp the crop rectangle boundaries and align them to a multiple of 2
+ * pixels.
+ */
+ rect.left = clamp(ALIGN(crop->rect.left, 2),
+ MT9T001_COLUMN_START_MIN,
+ MT9T001_COLUMN_START_MAX);
+ rect.top = clamp(ALIGN(crop->rect.top, 2),
+ MT9T001_ROW_START_MIN,
+ MT9T001_ROW_START_MAX);
+ rect.width = clamp(ALIGN(crop->rect.width, 2),
+ MT9T001_WINDOW_WIDTH_MIN + 1,
+ MT9T001_WINDOW_WIDTH_MAX + 1);
+ rect.height = clamp(ALIGN(crop->rect.height, 2),
+ MT9T001_WINDOW_HEIGHT_MIN + 1,
+ MT9T001_WINDOW_HEIGHT_MAX + 1);
+
+ rect.width = min(rect.width, MT9T001_PIXEL_ARRAY_WIDTH - rect.left);
+ rect.height = min(rect.height, MT9T001_PIXEL_ARRAY_HEIGHT - rect.top);
+
+ __crop = __mt9t001_get_pad_crop(mt9t001, fh, crop->pad, crop->which);
+
+ if (rect.width != __crop->width || rect.height != __crop->height) {
+ /* Reset the output image size if the crop rectangle size has
+ * been modified.
+ */
+ __format = __mt9t001_get_pad_format(mt9t001, fh, crop->pad,
+ crop->which);
+ __format->width = rect.width;
+ __format->height = rect.height;
+ }
+
+ *__crop = rect;
+ crop->rect = rect;
+
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev control operations
+ */
+
+#define V4L2_CID_TEST_PATTERN (V4L2_CID_USER_BASE | 0x1001)
+#define V4L2_CID_BLACK_LEVEL_AUTO (V4L2_CID_USER_BASE | 0x1002)
+#define V4L2_CID_BLACK_LEVEL_OFFSET (V4L2_CID_USER_BASE | 0x1003)
+#define V4L2_CID_BLACK_LEVEL_CALIBRATE (V4L2_CID_USER_BASE | 0x1004)
+
+#define V4L2_CID_GAIN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1001)
+#define V4L2_CID_GAIN_GREEN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1002)
+#define V4L2_CID_GAIN_GREEN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1003)
+#define V4L2_CID_GAIN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1004)
+
+static u16 mt9t001_gain_value(s32 *gain)
+{
+ /* Gain is controlled by 2 analog stages and a digital stage. Valid
+ * values for the 3 stages are
+ *
+ * Stage Min Max Step
+ * ------------------------------------------
+ * First analog stage x1 x2 1
+ * Second analog stage x1 x4 0.125
+ * Digital stage x1 x16 0.125
+ *
+ * To minimize noise, the gain stages should be used in the second
+ * analog stage, first analog stage, digital stage order. Gain from a
+ * previous stage should be pushed to its maximum value before the next
+ * stage is used.
+ */
+ if (*gain <= 32)
+ return *gain;
+
+ if (*gain <= 64) {
+ *gain &= ~1;
+ return (1 << 6) | (*gain >> 1);
+ }
+
+ *gain &= ~7;
+ return ((*gain - 64) << 5) | (1 << 6) | 32;
+}
+
+static int mt9t001_ctrl_freeze(struct mt9t001 *mt9t001, bool freeze)
+{
+ return mt9t001_set_output_control(mt9t001,
+ freeze ? 0 : MT9T001_OUTPUT_CONTROL_SYNC,
+ freeze ? MT9T001_OUTPUT_CONTROL_SYNC : 0);
+}
+
+static int mt9t001_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ static const u8 gains[4] = {
+ MT9T001_RED_GAIN, MT9T001_GREEN1_GAIN,
+ MT9T001_GREEN2_GAIN, MT9T001_BLUE_GAIN
+ };
+
+ struct mt9t001 *mt9t001 =
+ container_of(ctrl->handler, struct mt9t001, ctrls);
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
+ unsigned int count;
+ unsigned int i;
+ u16 value;
+ int ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN_RED:
+ case V4L2_CID_GAIN_GREEN_RED:
+ case V4L2_CID_GAIN_GREEN_BLUE:
+ case V4L2_CID_GAIN_BLUE:
+
+ /* Disable control updates if more than one control has changed
+ * in the cluster.
+ */
+ for (i = 0, count = 0; i < 4; ++i) {
+ struct v4l2_ctrl *gain = mt9t001->gains[i];
+
+ if (gain->val != gain->cur.val)
+ count++;
+ }
+
+ if (count > 1) {
+ ret = mt9t001_ctrl_freeze(mt9t001, true);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Update the gain controls. */
+ for (i = 0; i < 4; ++i) {
+ struct v4l2_ctrl *gain = mt9t001->gains[i];
+
+ if (gain->val == gain->cur.val)
+ continue;
+
+ value = mt9t001_gain_value(&gain->val);
+ ret = mt9t001_write(client, gains[i], value);
+ if (ret < 0) {
+ mt9t001_ctrl_freeze(mt9t001, false);
+ return ret;
+ }
+ }
+
+ /* Enable control updates. */
+ if (count > 1) {
+ ret = mt9t001_ctrl_freeze(mt9t001, false);
+ if (ret < 0)
+ return ret;
+ }
+
+ break;
+
+ case V4L2_CID_EXPOSURE:
+ ret = mt9t001_write(client, MT9T001_SHUTTER_WIDTH_LOW,
+ ctrl->val & 0xffff);
+ if (ret < 0)
+ return ret;
+
+ return mt9t001_write(client, MT9T001_SHUTTER_WIDTH_HIGH,
+ ctrl->val >> 16);
+
+ case V4L2_CID_TEST_PATTERN:
+ ret = mt9t001_set_output_control(mt9t001,
+ ctrl->val ? 0 : MT9T001_OUTPUT_CONTROL_TEST_DATA,
+ ctrl->val ? MT9T001_OUTPUT_CONTROL_TEST_DATA : 0);
+ if (ret < 0)
+ return ret;
+
+ return mt9t001_write(client, MT9T001_TEST_DATA, ctrl->val << 2);
+
+ case V4L2_CID_BLACK_LEVEL_AUTO:
+ value = ctrl->val ? 0 : MT9T001_BLACK_LEVEL_OVERRIDE;
+ ret = mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION,
+ value);
+ if (ret < 0)
+ return ret;
+
+ mt9t001->black_level = value;
+ break;
+
+ case V4L2_CID_BLACK_LEVEL_OFFSET:
+ ret = mt9t001_write(client, MT9T001_GREEN1_OFFSET, ctrl->val);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_GREEN2_OFFSET, ctrl->val);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_RED_OFFSET, ctrl->val);
+ if (ret < 0)
+ return ret;
+
+ return mt9t001_write(client, MT9T001_BLUE_OFFSET, ctrl->val);
+
+ case V4L2_CID_BLACK_LEVEL_CALIBRATE:
+ return mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION,
+ MT9T001_BLACK_LEVEL_RECALCULATE |
+ mt9t001->black_level);
+ }
+
+ return 0;
+}
+
+static struct v4l2_ctrl_ops mt9t001_ctrl_ops = {
+ .s_ctrl = mt9t001_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config mt9t001_ctrls[] = {
+ {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_TEST_PATTERN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Test pattern",
+ .min = 0,
+ .max = 1023,
+ .step = 1,
+ .def = 0,
+ .flags = 0,
+ }, {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_BLACK_LEVEL_AUTO,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Black Level, Auto",
+ .min = 0,
+ .max = 1,
+ .step = 1,
+ .def = 1,
+ .flags = 0,
+ }, {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_BLACK_LEVEL_OFFSET,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Black Level, Offset",
+ .min = -256,
+ .max = 255,
+ .step = 1,
+ .def = 32,
+ .flags = 0,
+ }, {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_BLACK_LEVEL_CALIBRATE,
+ .type = V4L2_CTRL_TYPE_BUTTON,
+ .name = "Black Level, Calibrate",
+ .min = 0,
+ .max = 0,
+ .step = 0,
+ .def = 0,
+ .flags = V4L2_CTRL_FLAG_WRITE_ONLY,
+ },
+};
+
+static const struct v4l2_ctrl_config mt9t001_gains[] = {
+ {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_GAIN_RED,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain, Red",
+ .min = MT9T001_GLOBAL_GAIN_MIN,
+ .max = MT9T001_GLOBAL_GAIN_MAX,
+ .step = 1,
+ .def = MT9T001_GLOBAL_GAIN_MIN,
+ .flags = 0,
+ }, {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_GAIN_GREEN_RED,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain, Green (R)",
+ .min = MT9T001_GLOBAL_GAIN_MIN,
+ .max = MT9T001_GLOBAL_GAIN_MAX,
+ .step = 1,
+ .def = MT9T001_GLOBAL_GAIN_MIN,
+ .flags = 0,
+ }, {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_GAIN_GREEN_BLUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain, Green (B)",
+ .min = MT9T001_GLOBAL_GAIN_MIN,
+ .max = MT9T001_GLOBAL_GAIN_MAX,
+ .step = 1,
+ .def = MT9T001_GLOBAL_GAIN_MIN,
+ .flags = 0,
+ }, {
+ .ops = &mt9t001_ctrl_ops,
+ .id = V4L2_CID_GAIN_BLUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain, Blue",
+ .min = MT9T001_GLOBAL_GAIN_MIN,
+ .max = MT9T001_GLOBAL_GAIN_MAX,
+ .step = 1,
+ .def = MT9T001_GLOBAL_GAIN_MIN,
+ .flags = 0,
+ },
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev internal operations
+ */
+
+static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *crop;
+
+ crop = v4l2_subdev_get_try_crop(fh, 0);
+ crop->left = MT9T001_COLUMN_START_DEF;
+ crop->top = MT9T001_ROW_START_DEF;
+ crop->width = MT9T001_WINDOW_WIDTH_DEF + 1;
+ crop->height = MT9T001_WINDOW_HEIGHT_DEF + 1;
+
+ format = v4l2_subdev_get_try_format(fh, 0);
+ format->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+ format->width = MT9T001_WINDOW_WIDTH_DEF + 1;
+ format->height = MT9T001_WINDOW_HEIGHT_DEF + 1;
+ format->field = V4L2_FIELD_NONE;
+ format->colorspace = V4L2_COLORSPACE_SRGB;
+
+ return 0;
+}
+
+static struct v4l2_subdev_video_ops mt9t001_subdev_video_ops = {
+ .s_stream = mt9t001_s_stream,
+};
+
+static struct v4l2_subdev_pad_ops mt9t001_subdev_pad_ops = {
+ .enum_mbus_code = mt9t001_enum_mbus_code,
+ .enum_frame_size = mt9t001_enum_frame_size,
+ .get_fmt = mt9t001_get_format,
+ .set_fmt = mt9t001_set_format,
+ .get_crop = mt9t001_get_crop,
+ .set_crop = mt9t001_set_crop,
+};
+
+static struct v4l2_subdev_ops mt9t001_subdev_ops = {
+ .video = &mt9t001_subdev_video_ops,
+ .pad = &mt9t001_subdev_pad_ops,
+};
+
+static struct v4l2_subdev_internal_ops mt9t001_subdev_internal_ops = {
+ .open = mt9t001_open,
+};
+
+static int mt9t001_video_probe(struct i2c_client *client)
+{
+ struct mt9t001_platform_data *pdata = client->dev.platform_data;
+ s32 data;
+ int ret;
+
+ dev_info(&client->dev, "Probing MT9T001 at address 0x%02x\n",
+ client->addr);
+
+ /* Reset the chip and stop data read out */
+ ret = mt9t001_write(client, MT9T001_RESET, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_RESET, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the pixel clock polarity */
+ if (pdata && pdata->clk_pol) {
+ ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK,
+ MT9T001_PIXEL_CLOCK_INVERT);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Read and check the sensor version */
+ data = mt9t001_read(client, MT9T001_CHIP_VERSION);
+ if (data != MT9T001_CHIP_ID) {
+ dev_err(&client->dev, "MT9T001 not detected, wrong version "
+ "0x%04x\n", data);
+ return -ENODEV;
+ }
+
+ dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n",
+ client->addr);
+
+ return ret;
+}
+
+static int mt9t001_probe(struct i2c_client *client,
+ const struct i2c_device_id *did)
+{
+ struct mt9t001 *mt9t001;
+ unsigned int i;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_warn(&client->adapter->dev,
+ "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
+ return -EIO;
+ }
+
+ ret = mt9t001_video_probe(client);
+ if (ret < 0)
+ return ret;
+
+ mt9t001 = kzalloc(sizeof(*mt9t001), GFP_KERNEL);
+ if (!mt9t001)
+ return -ENOMEM;
+
+ v4l2_ctrl_handler_init(&mt9t001->ctrls, ARRAY_SIZE(mt9t001_ctrls) +
+ ARRAY_SIZE(mt9t001_gains) + 2);
+
+ v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
+ V4L2_CID_EXPOSURE, MT9T001_SHUTTER_WIDTH_MIN,
+ MT9T001_SHUTTER_WIDTH_MAX, 1,
+ MT9T001_SHUTTER_WIDTH_DEF);
+ v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
+ V4L2_CID_BLACK_LEVEL, 1, 1, 1, 1);
+
+ for (i = 0; i < ARRAY_SIZE(mt9t001_ctrls); ++i)
+ v4l2_ctrl_new_custom(&mt9t001->ctrls, &mt9t001_ctrls[i], NULL);
+
+ for (i = 0; i < ARRAY_SIZE(mt9t001_gains); ++i)
+ mt9t001->gains[i] = v4l2_ctrl_new_custom(&mt9t001->ctrls,
+ &mt9t001_gains[i], NULL);
+
+ v4l2_ctrl_cluster(ARRAY_SIZE(mt9t001_gains), mt9t001->gains);
+
+ mt9t001->subdev.ctrl_handler = &mt9t001->ctrls;
+
+ if (mt9t001->ctrls.error) {
+ printk(KERN_INFO "%s: control initialization error %d\n",
+ __func__, mt9t001->ctrls.error);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ mt9t001->crop.left = MT9T001_COLUMN_START_DEF;
+ mt9t001->crop.top = MT9T001_ROW_START_DEF;
+ mt9t001->crop.width = MT9T001_WINDOW_WIDTH_DEF + 1;
+ mt9t001->crop.height = MT9T001_WINDOW_HEIGHT_DEF + 1;
+
+ mt9t001->format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+ mt9t001->format.width = MT9T001_WINDOW_WIDTH_DEF + 1;
+ mt9t001->format.height = MT9T001_WINDOW_HEIGHT_DEF + 1;
+ mt9t001->format.field = V4L2_FIELD_NONE;
+ mt9t001->format.colorspace = V4L2_COLORSPACE_SRGB;
+
+ v4l2_i2c_subdev_init(&mt9t001->subdev, client, &mt9t001_subdev_ops);
+ mt9t001->subdev.internal_ops = &mt9t001_subdev_internal_ops;
+ mt9t001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ mt9t001->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&mt9t001->subdev.entity, 1, &mt9t001->pad, 0);
+
+done:
+ if (ret < 0) {
+ v4l2_ctrl_handler_free(&mt9t001->ctrls);
+ media_entity_cleanup(&mt9t001->subdev.entity);
+ kfree(mt9t001);
+ }
+
+ return ret;
+}
+
+static int mt9t001_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+
+ v4l2_ctrl_handler_free(&mt9t001->ctrls);
+ v4l2_device_unregister_subdev(subdev);
+ media_entity_cleanup(&subdev->entity);
+ kfree(mt9t001);
+ return 0;
+}
+
+static const struct i2c_device_id mt9t001_id[] = {
+ { "mt9t001", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mt9t001_id);
+
+static struct i2c_driver mt9t001_driver = {
+ .driver = {
+ .name = "mt9t001",
+ },
+ .probe = mt9t001_probe,
+ .remove = mt9t001_remove,
+ .id_table = mt9t001_id,
+};
+
+static int __init mt9t001_init(void)
+{
+ return i2c_add_driver(&mt9t001_driver);
+}
+
+static void __exit mt9t001_exit(void)
+{
+ i2c_del_driver(&mt9t001_driver);
+}
+
+module_init(mt9t001_init);
+module_exit(mt9t001_exit);
+
+MODULE_DESCRIPTION("Aptina (Micron) MT9T001 Camera driver");
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index c045b47..c8e958a 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -191,7 +191,7 @@
*/
static int mx3_videobuf_setup(struct vb2_queue *vq,
unsigned int *count, unsigned int *num_planes,
- unsigned long sizes[], void *alloc_ctxs[])
+ unsigned int sizes[], void *alloc_ctxs[])
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
@@ -247,7 +247,7 @@
}
if (buf->state == CSI_BUF_NEEDS_INIT) {
- sg_dma_address(sg) = vb2_dma_contig_plane_paddr(vb, 0);
+ sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0);
sg_dma_len(sg) = new_size;
buf->txd = ichan->dma_chan.device->device_prep_slave_sg(
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 0b38500..f0c3968 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -21,6 +21,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DEBUG_VARIABLE debug
#include <media/saa7146_vv.h>
@@ -171,7 +173,7 @@
mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
if (mxb == NULL) {
- DEB_D(("not enough kernel memory.\n"));
+ DEB_D("not enough kernel memory\n");
return -ENOMEM;
}
@@ -179,7 +181,7 @@
saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
if (i2c_add_adapter(&mxb->i2c_adapter) < 0) {
- DEB_S(("cannot register i2c-device. skipping.\n"));
+ DEB_S("cannot register i2c-device. skipping.\n");
kfree(mxb);
return -EFAULT;
}
@@ -200,7 +202,7 @@
/* check if all devices are present */
if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
!mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
- printk("mxb: did not find all i2c devices. aborting\n");
+ pr_err("did not find all i2c devices. aborting\n");
i2c_del_adapter(&mxb->i2c_adapter);
kfree(mxb);
return -ENODEV;
@@ -346,11 +348,11 @@
msg.buf = &mxb_saa7740_init[i].data[0];
err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
if (err != 1) {
- DEB_D(("failed to initialize 'sound arena module'.\n"));
+ DEB_D("failed to initialize 'sound arena module'\n");
goto err;
}
}
- INFO(("'sound arena module' detected.\n"));
+ pr_info("'sound arena module' detected\n");
}
err:
/* the rest for saa7146: you should definitely set some basic values
@@ -390,7 +392,7 @@
for (i = MAXCONTROLS - 1; i >= 0; i--) {
if (mxb_controls[i].id == qc->id) {
*qc = mxb_controls[i];
- DEB_D(("VIDIOC_QUERYCTRL %d.\n", qc->id));
+ DEB_D("VIDIOC_QUERYCTRL %d\n", qc->id);
return 0;
}
}
@@ -413,11 +415,11 @@
if (vc->id == V4L2_CID_AUDIO_MUTE) {
vc->value = mxb->cur_mute;
- DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value));
+ DEB_D("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d\n", vc->value);
return 0;
}
- DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value));
+ DEB_EE("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d\n", vc->value);
return 0;
}
@@ -440,14 +442,14 @@
/* switch the audio-source */
tea6420_route_line(mxb, vc->value ? 6 :
video_audio_connect[mxb->cur_input]);
- DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n", vc->value));
+ DEB_EE("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d\n", vc->value);
}
return 0;
}
static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
{
- DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index));
+ DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
if (i->index >= MXB_INPUTS)
return -EINVAL;
memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
@@ -460,7 +462,7 @@
struct mxb *mxb = (struct mxb *)dev->ext_priv;
*i = mxb->cur_input;
- DEB_EE(("VIDIOC_G_INPUT %d.\n", *i));
+ DEB_EE("VIDIOC_G_INPUT %d\n", *i);
return 0;
}
@@ -471,7 +473,7 @@
int err = 0;
int i = 0;
- DEB_EE(("VIDIOC_S_INPUT %d.\n", input));
+ DEB_EE("VIDIOC_S_INPUT %d\n", input);
if (input >= MXB_INPUTS)
return -EINVAL;
@@ -514,7 +516,7 @@
/* switch video in saa7111a */
if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0))
- printk(KERN_ERR "VIDIOC_S_INPUT: could not address saa7111a.\n");
+ pr_err("VIDIOC_S_INPUT: could not address saa7111a\n");
/* switch the audio-source only if necessary */
if (0 == mxb->cur_mute)
@@ -529,11 +531,12 @@
struct mxb *mxb = (struct mxb *)dev->ext_priv;
if (t->index) {
- DEB_D(("VIDIOC_G_TUNER: channel %d does not have a tuner attached.\n", t->index));
+ DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n",
+ t->index);
return -EINVAL;
}
- DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index));
+ DEB_EE("VIDIOC_G_TUNER: %d\n", t->index);
memset(t, 0, sizeof(*t));
strlcpy(t->name, "TV Tuner", sizeof(t->name));
@@ -550,7 +553,8 @@
struct mxb *mxb = (struct mxb *)dev->ext_priv;
if (t->index) {
- DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n", t->index));
+ DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n",
+ t->index);
return -EINVAL;
}
@@ -564,14 +568,14 @@
struct mxb *mxb = (struct mxb *)dev->ext_priv;
if (mxb->cur_input) {
- DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",
- mxb->cur_input));
+ DEB_D("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",
+ mxb->cur_input);
return -EINVAL;
}
*f = mxb->cur_freq;
- DEB_EE(("VIDIOC_G_FREQ: freq:0x%08x.\n", mxb->cur_freq.frequency));
+ DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency);
return 0;
}
@@ -588,12 +592,13 @@
return -EINVAL;
if (mxb->cur_input) {
- DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n", mxb->cur_input));
+ DEB_D("VIDIOC_S_FREQ: channel %d does not have a tuner!\n",
+ mxb->cur_input);
return -EINVAL;
}
mxb->cur_freq = *f;
- DEB_EE(("VIDIOC_S_FREQUENCY: freq:0x%08x.\n", mxb->cur_freq.frequency));
+ DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency);
/* tune in desired frequency */
tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq);
@@ -612,18 +617,18 @@
struct mxb *mxb = (struct mxb *)dev->ext_priv;
if (a->index > MXB_INPUTS) {
- DEB_D(("VIDIOC_G_AUDIO %d out of range.\n", a->index));
+ DEB_D("VIDIOC_G_AUDIO %d out of range\n", a->index);
return -EINVAL;
}
- DEB_EE(("VIDIOC_G_AUDIO %d.\n", a->index));
+ DEB_EE("VIDIOC_G_AUDIO %d\n", a->index);
memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio));
return 0;
}
static int vidioc_s_audio(struct file *file, void *fh, struct v4l2_audio *a)
{
- DEB_D(("VIDIOC_S_AUDIO %d.\n", a->index));
+ DEB_D("VIDIOC_S_AUDIO %d\n", a->index);
return 0;
}
@@ -655,11 +660,11 @@
int i = *(int *)arg;
if (i < 0 || i >= MXB_AUDIOS) {
- DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n", i));
+ DEB_D("invalid argument to MXB_S_AUDIO_CD: i:%d\n", i);
return -EINVAL;
}
- DEB_EE(("MXB_S_AUDIO_CD: i:%d.\n", i));
+ DEB_EE("MXB_S_AUDIO_CD: i:%d\n", i);
tea6420_route_cd(mxb, i);
return 0;
@@ -669,17 +674,18 @@
int i = *(int *)arg;
if (i < 0 || i >= MXB_AUDIOS) {
- DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n", i));
+ DEB_D("invalid argument to MXB_S_AUDIO_LINE: i:%d\n",
+ i);
return -EINVAL;
}
- DEB_EE(("MXB_S_AUDIO_LINE: i:%d.\n", i));
+ DEB_EE("MXB_S_AUDIO_LINE: i:%d\n", i);
tea6420_route_line(mxb, i);
return 0;
}
default:
/*
- DEB2(printk("does not handle this ioctl.\n"));
+ DEB2(pr_err("does not handle this ioctl\n"));
*/
return -ENOIOCTLCMD;
}
@@ -693,7 +699,7 @@
{
struct mxb *mxb;
- DEB_EE(("dev:%p\n", dev));
+ DEB_EE("dev:%p\n", dev);
saa7146_vv_init(dev, &vv_data);
if (mxb_probe(dev)) {
@@ -720,7 +726,7 @@
#endif
vv_data.ops.vidioc_default = vidioc_default;
if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) {
- ERR(("cannot register capture v4l2 device. skipping.\n"));
+ ERR("cannot register capture v4l2 device. skipping.\n");
saa7146_vv_release(dev);
return -1;
}
@@ -728,11 +734,11 @@
/* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
if (MXB_BOARD_CAN_DO_VBI(dev)) {
if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
- ERR(("cannot register vbi v4l2 device. skipping.\n"));
+ ERR("cannot register vbi v4l2 device. skipping.\n");
}
}
- printk("mxb: found Multimedia eXtension Board #%d.\n", mxb_num);
+ pr_info("found Multimedia eXtension Board #%d\n", mxb_num);
mxb_num++;
mxb_init_done(dev);
@@ -743,7 +749,7 @@
{
struct mxb *mxb = (struct mxb *)dev->ext_priv;
- DEB_EE(("dev:%p\n", dev));
+ DEB_EE("dev:%p\n", dev);
saa7146_unregister_device(&mxb->video_dev,dev);
if (MXB_BOARD_CAN_DO_VBI(dev))
@@ -765,7 +771,7 @@
if (V4L2_STD_PAL_I == standard->id) {
v4l2_std_id std = V4L2_STD_PAL_I;
- DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
+ DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n");
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* unset the 7111 gpio register -- I don't know what this does exactly */
@@ -774,7 +780,7 @@
} else {
v4l2_std_id std = V4L2_STD_PAL_BG;
- DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
+ DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n");
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* set the 7111 gpio register -- I don't know what this does exactly */
@@ -852,7 +858,7 @@
static int __init mxb_init_module(void)
{
if (saa7146_register_extension(&extension)) {
- DEB_S(("failed to register extension.\n"));
+ DEB_S("failed to register extension\n");
return -ENODEV;
}
diff --git a/drivers/media/video/noon010pc30.c b/drivers/media/video/noon010pc30.c
index 35f722a..6cd21cf 100644
--- a/drivers/media/video/noon010pc30.c
+++ b/drivers/media/video/noon010pc30.c
@@ -1,7 +1,7 @@
/*
* Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP
*
- * Copyright (C) 2010 Samsung Electronics
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
* Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
*
* Initial register configuration based on a driver authored by
@@ -10,7 +10,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later vergsion.
+ * (at your option) any later version.
*/
#include <linux/delay.h>
@@ -131,17 +131,23 @@
struct noon010_info {
struct v4l2_subdev sd;
+ struct media_pad pad;
struct v4l2_ctrl_handler hdl;
- const struct noon010pc30_platform_data *pdata;
+ struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES];
+ u32 gpio_nreset;
+ u32 gpio_nstby;
+
+ /* Protects the struct members below */
+ struct mutex lock;
+
const struct noon010_format *curr_fmt;
const struct noon010_frmsize *curr_win;
+ unsigned int apply_new_cfg:1;
+ unsigned int streaming:1;
unsigned int hflip:1;
unsigned int vflip:1;
unsigned int power:1;
u8 i2c_reg_page;
- struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES];
- u32 gpio_nreset;
- u32 gpio_nstby;
};
struct i2c_regval {
@@ -292,8 +298,10 @@
u8 reg = sleep ? 0xF1 : 0xF0;
int ret = 0;
- if (reset)
+ if (reset) {
ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02);
+ udelay(20);
+ }
if (!ret) {
ret = cam_i2c_write(sd, POWER_CTRL_REG, reg);
if (reset && !ret)
@@ -313,6 +321,7 @@
return ret;
}
+/* Called with struct noon010_info.lock mutex held */
static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip)
{
struct noon010_info *info = to_noon010(sd);
@@ -340,21 +349,18 @@
static int noon010_set_params(struct v4l2_subdev *sd)
{
struct noon010_info *info = to_noon010(sd);
- int ret;
- if (!info->curr_win)
- return -EINVAL;
-
- ret = cam_i2c_write(sd, VDO_CTL_REG(0), info->curr_win->vid_ctl1);
-
- if (!ret && info->curr_fmt)
- ret = cam_i2c_write(sd, ISP_CTL_REG(0),
- info->curr_fmt->ispctl1_reg);
- return ret;
+ int ret = cam_i2c_write(sd, VDO_CTL_REG(0),
+ info->curr_win->vid_ctl1);
+ if (ret)
+ return ret;
+ return cam_i2c_write(sd, ISP_CTL_REG(0),
+ info->curr_fmt->ispctl1_reg);
}
/* Find nearest matching image pixel size. */
-static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf)
+static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf,
+ const struct noon010_frmsize **size)
{
unsigned int min_err = ~0;
int i = ARRAY_SIZE(noon010_sizes);
@@ -374,11 +380,14 @@
if (match) {
mf->width = match->width;
mf->height = match->height;
+ if (size)
+ *size = match;
return 0;
}
return -EINVAL;
}
+/* Called with info.lock mutex held */
static int power_enable(struct noon010_info *info)
{
int ret;
@@ -419,6 +428,7 @@
return 0;
}
+/* Called with info.lock mutex held */
static int power_disable(struct noon010_info *info)
{
int ret;
@@ -448,147 +458,175 @@
static int noon010_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct noon010_info *info = to_noon010(sd);
+ int ret = 0;
v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n",
__func__, ctrl->id, ctrl->val);
+ mutex_lock(&info->lock);
+ /*
+ * If the device is not powered up by the host driver do
+ * not apply any controls to H/W at this time. Instead
+ * the controls will be restored right after power-up.
+ */
+ if (!info->power)
+ goto unlock;
+
switch (ctrl->id) {
case V4L2_CID_AUTO_WHITE_BALANCE:
- return noon010_enable_autowhitebalance(sd, ctrl->val);
+ ret = noon010_enable_autowhitebalance(sd, ctrl->val);
+ break;
case V4L2_CID_BLUE_BALANCE:
- return cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val);
+ ret = cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val);
+ break;
case V4L2_CID_RED_BALANCE:
- return cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val);
+ ret = cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val);
+ break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
+unlock:
+ mutex_unlock(&info->lock);
+ return ret;
}
-static int noon010_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
- enum v4l2_mbus_pixelcode *code)
+static int noon010_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
{
- if (!code || index >= ARRAY_SIZE(noon010_formats))
+ if (code->index >= ARRAY_SIZE(noon010_formats))
return -EINVAL;
- *code = noon010_formats[index].code;
+ code->code = noon010_formats[code->index].code;
return 0;
}
-static int noon010_g_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
+static int noon010_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
{
struct noon010_info *info = to_noon010(sd);
- int ret;
+ struct v4l2_mbus_framefmt *mf;
- if (!mf)
- return -EINVAL;
-
- if (!info->curr_win || !info->curr_fmt) {
- ret = noon010_set_params(sd);
- if (ret)
- return ret;
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ if (fh) {
+ mf = v4l2_subdev_get_try_format(fh, 0);
+ fmt->format = *mf;
+ }
+ return 0;
}
+ mf = &fmt->format;
- mf->width = info->curr_win->width;
- mf->height = info->curr_win->height;
- mf->code = info->curr_fmt->code;
- mf->colorspace = info->curr_fmt->colorspace;
- mf->field = V4L2_FIELD_NONE;
+ mutex_lock(&info->lock);
+ mf->width = info->curr_win->width;
+ mf->height = info->curr_win->height;
+ mf->code = info->curr_fmt->code;
+ mf->colorspace = info->curr_fmt->colorspace;
+ mf->field = V4L2_FIELD_NONE;
+ mutex_unlock(&info->lock);
return 0;
}
/* Return nearest media bus frame format. */
-static const struct noon010_format *try_fmt(struct v4l2_subdev *sd,
+static const struct noon010_format *noon010_try_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf)
{
int i = ARRAY_SIZE(noon010_formats);
- noon010_try_frame_size(mf);
-
- while (i--)
+ while (--i)
if (mf->code == noon010_formats[i].code)
break;
-
mf->code = noon010_formats[i].code;
return &noon010_formats[i];
}
-static int noon010_try_fmt(struct v4l2_subdev *sd,
- struct v4l2_mbus_framefmt *mf)
-{
- if (!sd || !mf)
- return -EINVAL;
-
- try_fmt(sd, mf);
- return 0;
-}
-
-static int noon010_s_fmt(struct v4l2_subdev *sd,
- struct v4l2_mbus_framefmt *mf)
+static int noon010_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
{
struct noon010_info *info = to_noon010(sd);
+ const struct noon010_frmsize *size = NULL;
+ const struct noon010_format *nf;
+ struct v4l2_mbus_framefmt *mf;
+ int ret = 0;
- if (!sd || !mf)
- return -EINVAL;
+ nf = noon010_try_fmt(sd, &fmt->format);
+ noon010_try_frame_size(&fmt->format, &size);
+ fmt->format.colorspace = V4L2_COLORSPACE_JPEG;
- info->curr_fmt = try_fmt(sd, mf);
-
- return noon010_set_params(sd);
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ if (fh) {
+ mf = v4l2_subdev_get_try_format(fh, 0);
+ *mf = fmt->format;
+ }
+ return 0;
+ }
+ mutex_lock(&info->lock);
+ if (!info->streaming) {
+ info->apply_new_cfg = 1;
+ info->curr_fmt = nf;
+ info->curr_win = size;
+ } else {
+ ret = -EBUSY;
+ }
+ mutex_unlock(&info->lock);
+ return ret;
}
+/* Called with struct noon010_info.lock mutex held */
static int noon010_base_config(struct v4l2_subdev *sd)
{
- struct noon010_info *info = to_noon010(sd);
- int ret;
-
- ret = noon010_bulk_write_reg(sd, noon010_base_regs);
- if (!ret) {
- info->curr_fmt = &noon010_formats[0];
- info->curr_win = &noon010_sizes[0];
+ int ret = noon010_bulk_write_reg(sd, noon010_base_regs);
+ if (!ret)
ret = noon010_set_params(sd);
- }
if (!ret)
ret = noon010_set_flip(sd, 1, 0);
- if (!ret)
- ret = noon010_power_ctrl(sd, false, false);
- /* sync the handler and the registers state */
- v4l2_ctrl_handler_setup(&to_noon010(sd)->hdl);
return ret;
}
static int noon010_s_power(struct v4l2_subdev *sd, int on)
{
struct noon010_info *info = to_noon010(sd);
- const struct noon010pc30_platform_data *pdata = info->pdata;
- int ret = 0;
+ int ret;
- if (WARN(pdata == NULL, "No platform data!\n"))
- return -ENOMEM;
-
+ mutex_lock(&info->lock);
if (on) {
ret = power_enable(info);
- if (ret)
- return ret;
- ret = noon010_base_config(sd);
+ if (!ret)
+ ret = noon010_base_config(sd);
} else {
noon010_power_ctrl(sd, false, true);
ret = power_disable(info);
- info->curr_win = NULL;
- info->curr_fmt = NULL;
}
+ mutex_unlock(&info->lock);
+
+ /* Restore the controls state */
+ if (!ret && on)
+ ret = v4l2_ctrl_handler_setup(&info->hdl);
return ret;
}
-static int noon010_g_chip_ident(struct v4l2_subdev *sd,
- struct v4l2_dbg_chip_ident *chip)
+static int noon010_s_stream(struct v4l2_subdev *sd, int on)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct noon010_info *info = to_noon010(sd);
+ int ret = 0;
- return v4l2_chip_ident_i2c_client(client, chip,
- V4L2_IDENT_NOON010PC30, 0);
+ mutex_lock(&info->lock);
+ if (!info->streaming != !on) {
+ ret = noon010_power_ctrl(sd, false, !on);
+ if (!ret)
+ info->streaming = on;
+ }
+ if (!ret && on && info->apply_new_cfg) {
+ ret = noon010_set_params(sd);
+ if (!ret)
+ info->apply_new_cfg = 0;
+ }
+ mutex_unlock(&info->lock);
+ return ret;
}
static int noon010_log_status(struct v4l2_subdev *sd)
@@ -599,12 +637,27 @@
return 0;
}
+static int noon010_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(fh, 0);
+
+ mf->width = noon010_sizes[0].width;
+ mf->height = noon010_sizes[0].height;
+ mf->code = noon010_formats[0].code;
+ mf->colorspace = V4L2_COLORSPACE_JPEG;
+ mf->field = V4L2_FIELD_NONE;
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops noon010_subdev_internal_ops = {
+ .open = noon010_open,
+};
+
static const struct v4l2_ctrl_ops noon010_ctrl_ops = {
.s_ctrl = noon010_s_ctrl,
};
static const struct v4l2_subdev_core_ops noon010_core_ops = {
- .g_chip_ident = noon010_g_chip_ident,
.s_power = noon010_s_power,
.g_ctrl = v4l2_subdev_g_ctrl,
.s_ctrl = v4l2_subdev_s_ctrl,
@@ -616,15 +669,19 @@
.log_status = noon010_log_status,
};
-static const struct v4l2_subdev_video_ops noon010_video_ops = {
- .g_mbus_fmt = noon010_g_fmt,
- .s_mbus_fmt = noon010_s_fmt,
- .try_mbus_fmt = noon010_try_fmt,
- .enum_mbus_fmt = noon010_enum_fmt,
+static struct v4l2_subdev_pad_ops noon010_pad_ops = {
+ .enum_mbus_code = noon010_enum_mbus_code,
+ .get_fmt = noon010_get_fmt,
+ .set_fmt = noon010_set_fmt,
+};
+
+static struct v4l2_subdev_video_ops noon010_video_ops = {
+ .s_stream = noon010_s_stream,
};
static const struct v4l2_subdev_ops noon010_ops = {
.core = &noon010_core_ops,
+ .pad = &noon010_pad_ops,
.video = &noon010_video_ops,
};
@@ -665,10 +722,14 @@
if (!info)
return -ENOMEM;
+ mutex_init(&info->lock);
sd = &info->sd;
strlcpy(sd->name, MODULE_NAME, sizeof(sd->name));
v4l2_i2c_subdev_init(sd, client, &noon010_ops);
+ sd->internal_ops = &noon010_subdev_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
v4l2_ctrl_handler_init(&info->hdl, 3);
v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops,
@@ -684,10 +745,11 @@
if (ret)
goto np_err;
- info->pdata = client->dev.platform_data;
info->i2c_reg_page = -1;
info->gpio_nreset = -EINVAL;
info->gpio_nstby = -EINVAL;
+ info->curr_fmt = &noon010_formats[0];
+ info->curr_win = &noon010_sizes[0];
if (gpio_is_valid(pdata->gpio_nreset)) {
ret = gpio_request(pdata->gpio_nreset, "NOON010PC30 NRST");
@@ -719,11 +781,17 @@
if (ret)
goto np_reg_err;
+ info->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+ ret = media_entity_init(&sd->entity, 1, &info->pad, 0);
+ if (ret < 0)
+ goto np_me_err;
+
ret = noon010_detect(client, info);
if (!ret)
return 0;
- /* the sensor detection failed */
+np_me_err:
regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply);
np_reg_err:
if (gpio_is_valid(info->gpio_nstby))
@@ -754,6 +822,7 @@
if (gpio_is_valid(info->gpio_nstby))
gpio_free(info->gpio_nstby);
+ media_entity_cleanup(&sd->entity);
kfree(info);
return 0;
}
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index b3a5ecd..30d8896b 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -400,7 +400,6 @@
ovl->get_overlay_info(ovl, &info);
info.paddr = addr;
- info.vaddr = NULL;
info.width = cropwidth;
info.height = cropheight;
info.color_mode = vout->dss_mode;
@@ -1165,12 +1164,17 @@
{
int ret = 0;
struct omap_vout_device *vout = fh;
+ struct omap_overlay *ovl;
+ struct omapvideo_info *ovid;
struct v4l2_window *win = &f->fmt.win;
+ ovid = &vout->vid_info;
+ ovl = ovid->overlays[0];
+
ret = omap_vout_try_window(&vout->fbuf, win);
if (!ret) {
- if (vout->vid == OMAP_VIDEO1)
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
win->global_alpha = 255;
else
win->global_alpha = f->fmt.win.global_alpha;
@@ -1194,8 +1198,8 @@
ret = omap_vout_new_window(&vout->crop, &vout->win, &vout->fbuf, win);
if (!ret) {
- /* Video1 plane does not support global alpha */
- if (ovl->id == OMAP_DSS_VIDEO1)
+ /* Video1 plane does not support global alpha on OMAP3 */
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
vout->win.global_alpha = 255;
else
vout->win.global_alpha = f->fmt.win.global_alpha;
@@ -1788,7 +1792,9 @@
if (ovl->manager && ovl->manager->get_manager_info &&
ovl->manager->set_manager_info) {
ovl->manager->get_manager_info(ovl->manager, &info);
- info.alpha_enabled = enable;
+ /* enable this only if there is no zorder cap */
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
+ info.partial_alpha_enabled = enable;
if (ovl->manager->set_manager_info(ovl->manager, &info))
return -EINVAL;
}
@@ -1820,7 +1826,7 @@
}
if (ovl->manager && ovl->manager->get_manager_info) {
ovl->manager->get_manager_info(ovl->manager, &info);
- if (info.alpha_enabled)
+ if (info.partial_alpha_enabled)
a->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA;
}
diff --git a/drivers/media/video/omap3isp/Makefile b/drivers/media/video/omap3isp/Makefile
index b1b34477..e8847e7 100644
--- a/drivers/media/video/omap3isp/Makefile
+++ b/drivers/media/video/omap3isp/Makefile
@@ -1,8 +1,6 @@
# Makefile for OMAP3 ISP driver
-ifdef CONFIG_VIDEO_OMAP3_DEBUG
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_VIDEO_OMAP3_DEBUG) += -DDEBUG
omap3-isp-objs += \
isp.o ispqueue.o ispvideo.o \
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 5cea2bb..678e125 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -80,6 +80,13 @@
#include "isph3a.h"
#include "isphist.h"
+/*
+ * this is provided as an interim solution until omap3isp doesn't need
+ * any omap-specific iommu API
+ */
+#define to_iommu(dev) \
+ (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
+
static unsigned int autoidle;
module_param(autoidle, int, 0444);
MODULE_PARM_DESC(autoidle, "Enable OMAP3ISP AUTOIDLE support");
@@ -732,7 +739,7 @@
struct media_pad *pad;
struct v4l2_subdev *subdev;
unsigned long flags;
- int ret = 0;
+ int ret;
spin_lock_irqsave(&pipe->lock, flags);
pipe->state &= ~(ISP_PIPELINE_IDLE_INPUT | ISP_PIPELINE_IDLE_OUTPUT);
@@ -756,7 +763,7 @@
ret = v4l2_subdev_call(subdev, video, s_stream, mode);
if (ret < 0 && ret != -ENOIOCTLCMD)
- break;
+ return ret;
if (subdev == &isp->isp_ccdc.subdev) {
v4l2_subdev_call(&isp->isp_aewb.subdev, video,
@@ -777,7 +784,7 @@
if (pipe->do_propagation && mode == ISP_PIPELINE_STREAM_SINGLESHOT)
atomic_inc(&pipe->frame_number);
- return ret;
+ return 0;
}
static int isp_pipeline_wait_resizer(struct isp_device *isp)
@@ -1108,7 +1115,7 @@
{
isp_save_context(isp, isp_reg_list);
if (isp->iommu)
- iommu_save_ctx(isp->iommu);
+ omap_iommu_save_ctx(isp->iommu);
}
/*
@@ -1122,7 +1129,7 @@
{
isp_restore_context(isp, isp_reg_list);
if (isp->iommu)
- iommu_restore_ctx(isp->iommu);
+ omap_iommu_restore_ctx(isp->iommu);
omap3isp_ccdc_restore_context(isp);
omap3isp_preview_restore_context(isp);
}
@@ -1975,7 +1982,8 @@
isp_cleanup_modules(isp);
omap3isp_get(isp);
- iommu_put(isp->iommu);
+ iommu_detach_device(isp->domain, isp->iommu_dev);
+ iommu_domain_free(isp->domain);
omap3isp_put(isp);
free_irq(isp->irq_num, isp);
@@ -2123,25 +2131,41 @@
}
/* IOMMU */
- isp->iommu = iommu_get("isp");
- if (IS_ERR_OR_NULL(isp->iommu)) {
- isp->iommu = NULL;
+ isp->iommu_dev = omap_find_iommu_device("isp");
+ if (!isp->iommu_dev) {
+ dev_err(isp->dev, "omap_find_iommu_device failed\n");
ret = -ENODEV;
goto error_isp;
}
+ /* to be removed once iommu migration is complete */
+ isp->iommu = to_iommu(isp->iommu_dev);
+
+ isp->domain = iommu_domain_alloc(pdev->dev.bus);
+ if (!isp->domain) {
+ dev_err(isp->dev, "can't alloc iommu domain\n");
+ ret = -ENOMEM;
+ goto error_isp;
+ }
+
+ ret = iommu_attach_device(isp->domain, isp->iommu_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "can't attach iommu device: %d\n", ret);
+ goto free_domain;
+ }
+
/* Interrupt */
isp->irq_num = platform_get_irq(pdev, 0);
if (isp->irq_num <= 0) {
dev_err(isp->dev, "No IRQ resource\n");
ret = -ENODEV;
- goto error_isp;
+ goto detach_dev;
}
if (request_irq(isp->irq_num, isp_isr, IRQF_SHARED, "OMAP3 ISP", isp)) {
dev_err(isp->dev, "Unable to request IRQ\n");
ret = -EINVAL;
- goto error_isp;
+ goto detach_dev;
}
/* Entities */
@@ -2162,8 +2186,11 @@
isp_cleanup_modules(isp);
error_irq:
free_irq(isp->irq_num, isp);
+detach_dev:
+ iommu_detach_device(isp->domain, isp->iommu_dev);
+free_domain:
+ iommu_domain_free(isp->domain);
error_isp:
- iommu_put(isp->iommu);
omap3isp_put(isp);
error:
isp_put_clocks(isp);
diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h
index 529e582..705946e 100644
--- a/drivers/media/video/omap3isp/isp.h
+++ b/drivers/media/video/omap3isp/isp.h
@@ -27,11 +27,13 @@
#ifndef OMAP3_ISP_CORE_H
#define OMAP3_ISP_CORE_H
+#include <media/omap3isp.h>
#include <media/v4l2-device.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/wait.h>
+#include <linux/iommu.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
@@ -94,14 +96,6 @@
OMAP3_ISP_SUBCLK_RESIZER = (1 << 4),
};
-enum isp_interface_type {
- ISP_INTERFACE_PARALLEL,
- ISP_INTERFACE_CSI2A_PHY2,
- ISP_INTERFACE_CCP2B_PHY1,
- ISP_INTERFACE_CCP2B_PHY2,
- ISP_INTERFACE_CSI2C_PHY1,
-};
-
/* ISP: OMAP 34xx ES 1.0 */
#define ISP_REVISION_1_0 0x10
/* ISP2: OMAP 34xx ES 2.0, 2.1 and 3.0 */
@@ -130,82 +124,6 @@
u32 val;
};
-/**
- * struct isp_parallel_platform_data - Parallel interface platform data
- * @data_lane_shift: Data lane shifter
- * 0 - CAMEXT[13:0] -> CAM[13:0]
- * 1 - CAMEXT[13:2] -> CAM[11:0]
- * 2 - CAMEXT[13:4] -> CAM[9:0]
- * 3 - CAMEXT[13:6] -> CAM[7:0]
- * @clk_pol: Pixel clock polarity
- * 0 - Non Inverted, 1 - Inverted
- * @hs_pol: Horizontal synchronization polarity
- * 0 - Active high, 1 - Active low
- * @vs_pol: Vertical synchronization polarity
- * 0 - Active high, 1 - Active low
- * @bridge: CCDC Bridge input control
- * ISPCTRL_PAR_BRIDGE_DISABLE - Disable
- * ISPCTRL_PAR_BRIDGE_LENDIAN - Little endian
- * ISPCTRL_PAR_BRIDGE_BENDIAN - Big endian
- */
-struct isp_parallel_platform_data {
- unsigned int data_lane_shift:2;
- unsigned int clk_pol:1;
- unsigned int hs_pol:1;
- unsigned int vs_pol:1;
- unsigned int bridge:4;
-};
-
-/**
- * struct isp_ccp2_platform_data - CCP2 interface platform data
- * @strobe_clk_pol: Strobe/clock polarity
- * 0 - Non Inverted, 1 - Inverted
- * @crc: Enable the cyclic redundancy check
- * @ccp2_mode: Enable CCP2 compatibility mode
- * 0 - MIPI-CSI1 mode, 1 - CCP2 mode
- * @phy_layer: Physical layer selection
- * ISPCCP2_CTRL_PHY_SEL_CLOCK - Data/clock physical layer
- * ISPCCP2_CTRL_PHY_SEL_STROBE - Data/strobe physical layer
- * @vpclk_div: Video port output clock control
- */
-struct isp_ccp2_platform_data {
- unsigned int strobe_clk_pol:1;
- unsigned int crc:1;
- unsigned int ccp2_mode:1;
- unsigned int phy_layer:1;
- unsigned int vpclk_div:2;
-};
-
-/**
- * struct isp_csi2_platform_data - CSI2 interface platform data
- * @crc: Enable the cyclic redundancy check
- * @vpclk_div: Video port output clock control
- */
-struct isp_csi2_platform_data {
- unsigned crc:1;
- unsigned vpclk_div:2;
-};
-
-struct isp_subdev_i2c_board_info {
- struct i2c_board_info *board_info;
- int i2c_adapter_id;
-};
-
-struct isp_v4l2_subdevs_group {
- struct isp_subdev_i2c_board_info *subdevs;
- enum isp_interface_type interface;
- union {
- struct isp_parallel_platform_data parallel;
- struct isp_ccp2_platform_data ccp2;
- struct isp_csi2_platform_data csi2;
- } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
-};
-
-struct isp_platform_data {
- struct isp_v4l2_subdevs_group *subdevs;
- void (*set_constraints)(struct isp_device *isp, bool enable);
-};
-
struct isp_platform_callback {
u32 (*set_xclk)(struct isp_device *isp, u32 xclk, u8 xclksel);
int (*csiphy_config)(struct isp_csiphy *phy,
@@ -294,7 +212,9 @@
unsigned int sbl_resources;
unsigned int subclk_resources;
- struct iommu *iommu;
+ struct omap_iommu *iommu;
+ struct iommu_domain *domain;
+ struct device *iommu_dev;
struct isp_platform_callback platform_cb;
};
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 80796eb..253fdcc 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -366,7 +366,7 @@
dma_unmap_sg(isp->dev, req->iovm->sgt->sgl,
req->iovm->sgt->nents, DMA_TO_DEVICE);
if (req->table)
- iommu_vfree(isp->iommu, req->table);
+ omap_iommu_vfree(isp->domain, isp->iommu, req->table);
kfree(req);
}
@@ -438,15 +438,15 @@
req->enable = 1;
- req->table = iommu_vmalloc(isp->iommu, 0, req->config.size,
- IOMMU_FLAG);
+ req->table = omap_iommu_vmalloc(isp->domain, isp->iommu, 0,
+ req->config.size, IOMMU_FLAG);
if (IS_ERR_VALUE(req->table)) {
req->table = 0;
ret = -ENOMEM;
goto done;
}
- req->iovm = find_iovm_area(isp->iommu, req->table);
+ req->iovm = omap_find_iovm_area(isp->iommu, req->table);
if (req->iovm == NULL) {
ret = -ENOMEM;
goto done;
@@ -462,7 +462,7 @@
dma_sync_sg_for_cpu(isp->dev, req->iovm->sgt->sgl,
req->iovm->sgt->nents, DMA_TO_DEVICE);
- table = da_to_va(isp->iommu, req->table);
+ table = omap_da_to_va(isp->iommu, req->table);
if (copy_from_user(table, config->lsc, req->config.size)) {
ret = -EFAULT;
goto done;
@@ -731,18 +731,19 @@
/*
* table_new must be 64-bytes aligned, but it's
- * already done by iommu_vmalloc().
+ * already done by omap_iommu_vmalloc().
*/
size = ccdc->fpc.fpnum * 4;
- table_new = iommu_vmalloc(isp->iommu, 0, size,
- IOMMU_FLAG);
+ table_new = omap_iommu_vmalloc(isp->domain, isp->iommu,
+ 0, size, IOMMU_FLAG);
if (IS_ERR_VALUE(table_new))
return -ENOMEM;
- if (copy_from_user(da_to_va(isp->iommu, table_new),
+ if (copy_from_user(omap_da_to_va(isp->iommu, table_new),
(__force void __user *)
ccdc->fpc.fpcaddr, size)) {
- iommu_vfree(isp->iommu, table_new);
+ omap_iommu_vfree(isp->domain, isp->iommu,
+ table_new);
return -EFAULT;
}
@@ -752,7 +753,7 @@
ccdc_configure_fpc(ccdc);
if (table_old != 0)
- iommu_vfree(isp->iommu, table_old);
+ omap_iommu_vfree(isp->domain, isp->iommu, table_old);
}
return ccdc_lsc_config(ccdc, ccdc_struct);
@@ -1405,11 +1406,14 @@
static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
{
+ struct isp_pipeline *pipe =
+ to_isp_pipeline(&ccdc->video_out.video.entity);
struct video_device *vdev = &ccdc->subdev.devnode;
struct v4l2_event event;
memset(&event, 0, sizeof(event));
- event.type = V4L2_EVENT_OMAP3ISP_HS_VS;
+ event.type = V4L2_EVENT_FRAME_SYNC;
+ event.u.frame_sync.frame_sequence = atomic_read(&pipe->frame_number);
v4l2_event_queue(vdev, &event);
}
@@ -1691,7 +1695,11 @@
static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
struct v4l2_event_subscription *sub)
{
- if (sub->type != V4L2_EVENT_OMAP3ISP_HS_VS)
+ if (sub->type != V4L2_EVENT_FRAME_SYNC)
+ return -EINVAL;
+
+ /* line number is zero at frame start */
+ if (sub->id != 0)
return -EINVAL;
return v4l2_event_subscribe(fh, sub, OMAP3ISP_CCDC_NEVENTS);
@@ -2287,5 +2295,5 @@
ccdc_lsc_free_queue(ccdc, &ccdc->lsc.free_queue);
if (ccdc->fpc.fpcaddr != 0)
- iommu_vfree(isp->iommu, ccdc->fpc.fpcaddr);
+ omap_iommu_vfree(isp->domain, isp->iommu, ccdc->fpc.fpcaddr);
}
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index ec9e395..fa1d09b 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -243,9 +243,9 @@
val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
if (!(val & ISPCCP2_CTRL_MODE)) {
- if (pdata->ccp2_mode)
+ if (pdata->ccp2_mode == ISP_CCP2_MODE_CCP2)
dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n");
- if (pdata->phy_layer == ISPCCP2_CTRL_PHY_SEL_STROBE)
+ if (pdata->phy_layer == ISP_CCP2_PHY_DATA_STROBE)
/* Strobe mode requires CCP2 */
return -EIO;
}
diff --git a/drivers/media/video/omap3isp/ispqueue.c b/drivers/media/video/omap3isp/ispqueue.c
index 9c31714..9bebb1e 100644
--- a/drivers/media/video/omap3isp/ispqueue.c
+++ b/drivers/media/video/omap3isp/ispqueue.c
@@ -868,6 +868,10 @@
goto done;
if (vbuf->memory == V4L2_MEMORY_USERPTR &&
+ vbuf->length < buf->vbuf.length)
+ goto done;
+
+ if (vbuf->memory == V4L2_MEMORY_USERPTR &&
vbuf->m.userptr != buf->vbuf.m.userptr) {
isp_video_buffer_cleanup(buf);
buf->vbuf.m.userptr = vbuf->m.userptr;
diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c
index 8080659..7329055 100644
--- a/drivers/media/video/omap3isp/ispstat.c
+++ b/drivers/media/video/omap3isp/ispstat.c
@@ -366,7 +366,8 @@
dma_unmap_sg(isp->dev, buf->iovm->sgt->sgl,
buf->iovm->sgt->nents,
DMA_FROM_DEVICE);
- iommu_vfree(isp->iommu, buf->iommu_addr);
+ omap_iommu_vfree(isp->domain, isp->iommu,
+ buf->iommu_addr);
} else {
if (!buf->virt_addr)
continue;
@@ -399,8 +400,8 @@
struct iovm_struct *iovm;
WARN_ON(buf->dma_addr);
- buf->iommu_addr = iommu_vmalloc(isp->iommu, 0, size,
- IOMMU_FLAG);
+ buf->iommu_addr = omap_iommu_vmalloc(isp->domain, isp->iommu, 0,
+ size, IOMMU_FLAG);
if (IS_ERR((void *)buf->iommu_addr)) {
dev_err(stat->isp->dev,
"%s: Can't acquire memory for "
@@ -409,7 +410,7 @@
return -ENOMEM;
}
- iovm = find_iovm_area(isp->iommu, buf->iommu_addr);
+ iovm = omap_find_iovm_area(isp->iommu, buf->iommu_addr);
if (!iovm ||
!dma_map_sg(isp->dev, iovm->sgt->sgl, iovm->sgt->nents,
DMA_FROM_DEVICE)) {
@@ -418,7 +419,7 @@
}
buf->iovm = iovm;
- buf->virt_addr = da_to_va(stat->isp->iommu,
+ buf->virt_addr = omap_da_to_va(stat->isp->iommu,
(u32)buf->iommu_addr);
buf->empty = 1;
dev_dbg(stat->isp->dev, "%s: buffer[%d] allocated."
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index fd965ad..0cb8a9f 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -278,7 +278,8 @@
* limits reported by every block in the pipeline.
*
* Return 0 if all formats match, or -EPIPE if at least one link is found with
- * different formats on its two ends.
+ * different formats on its two ends or if the pipeline doesn't start with a
+ * video source (either a subdev with no input pad, or a non-subdev entity).
*/
static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
{
@@ -329,10 +330,15 @@
* in the middle of it. */
shifter_link = subdev == &isp->isp_ccdc.subdev;
- /* Retrieve the source format */
+ /* Retrieve the source format. Return an error if no source
+ * entity can be found, and stop checking the pipeline if the
+ * source entity isn't a subdev.
+ */
pad = media_entity_remote_source(pad);
- if (pad == NULL ||
- media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+ if (pad == NULL)
+ return -EPIPE;
+
+ if (media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
break;
subdev = media_entity_to_v4l2_subdev(pad->entity);
@@ -446,7 +452,7 @@
sgt->nents = sglen;
sgt->orig_nents = sglen;
- da = iommu_vmap(isp->iommu, 0, sgt, IOMMU_FLAG);
+ da = omap_iommu_vmap(isp->domain, isp->iommu, 0, sgt, IOMMU_FLAG);
if (IS_ERR_VALUE(da))
kfree(sgt);
@@ -462,7 +468,7 @@
{
struct sg_table *sgt;
- sgt = iommu_vunmap(isp->iommu, (u32)da);
+ sgt = omap_iommu_vunmap(isp->domain, isp->iommu, (u32)da);
kfree(sgt);
}
@@ -1050,6 +1056,14 @@
if (video->isp->pdata->set_constraints)
video->isp->pdata->set_constraints(video->isp, false);
media_entity_pipeline_stop(&video->video.entity);
+ /* The DMA queue must be emptied here, otherwise CCDC interrupts
+ * that will get triggered the next time the CCDC is powered up
+ * will try to access buffers that might have been freed but
+ * still present in the DMA queue. This can easily get triggered
+ * if the above omap3isp_pipeline_set_stream() call fails on a
+ * system with a free-running sensor.
+ */
+ INIT_LIST_HEAD(&video->dmaqueue);
video->queue = NULL;
}
diff --git a/drivers/media/video/pvrusb2/Makefile b/drivers/media/video/pvrusb2/Makefile
index de2fc14f..c17f37d 100644
--- a/drivers/media/video/pvrusb2/Makefile
+++ b/drivers/media/video/pvrusb2/Makefile
@@ -16,7 +16,7 @@
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index e98d382..5a6f24d 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2993,6 +2993,13 @@
pvr2_subdev_set_control(hdw, id, #lab, (hdw)->lab##_val); \
}
+int pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw, v4l2_std_id *std)
+{
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ video, querystd, std);
+ return 0;
+}
+
/* Execute whatever commands are required to update the state of all the
sub-devices so that they match our current control values. */
static void pvr2_subdev_update(struct pvr2_hdw *hdw)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
index d7753ae..6654658 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
@@ -214,6 +214,9 @@
int pvr2_hdw_get_stdenum_value(struct pvr2_hdw *hdw,struct v4l2_standard *std,
unsigned int idx);
+/* Get the detected video standard */
+int pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw, v4l2_std_id *std);
+
/* Enable / disable retrieval of CPU firmware or prom contents. This must
be enabled before pvr2_hdw_cpufw_get() will function. Note that doing
this may prevent the device from running (and leaving this mode may
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index e27f8ab..ce7ac45 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -227,6 +227,14 @@
break;
}
+ case VIDIOC_QUERYSTD:
+ {
+ v4l2_std_id *std = arg;
+ *std = V4L2_STD_ALL;
+ ret = pvr2_hdw_get_detected_std(hdw, std);
+ break;
+ }
+
case VIDIOC_G_STD:
{
int val = 0;
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 51ca358..360be22 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -745,7 +745,7 @@
/* Videobuf2 operations */
static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned long sizes[],
+ unsigned int *nplanes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct pwc_device *pdev = vb2_get_drv_priv(vq);
@@ -816,7 +816,7 @@
spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags);
}
-static int start_streaming(struct vb2_queue *vq)
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
{
struct pwc_device *pdev = vb2_get_drv_priv(vq);
diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c
index 8c70e64..a10ff6b 100644
--- a/drivers/media/video/pwc/pwc-v4l.c
+++ b/drivers/media/video/pwc/pwc-v4l.c
@@ -83,6 +83,7 @@
.id = PWC_CID_CUSTOM(contour),
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contour",
+ .flags = V4L2_CTRL_FLAG_SLIDER,
.min = 0,
.max = 63,
.step = 1,
@@ -206,8 +207,7 @@
pdev->blue_balance = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
V4L2_CID_BLUE_BALANCE, 0, 255, 1, def);
- v4l2_ctrl_auto_cluster(3, &pdev->auto_white_balance, awb_manual,
- pdev->auto_white_balance->cur.val == awb_auto);
+ v4l2_ctrl_auto_cluster(3, &pdev->auto_white_balance, awb_manual, true);
/* autogain, gain */
r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, AGC_MODE_FORMATTER, &def);
@@ -331,12 +331,12 @@
pdev->restore_user = v4l2_ctrl_new_custom(hdl, &pwc_restore_user_cfg,
NULL);
if (pdev->restore_user)
- pdev->restore_user->flags = V4L2_CTRL_FLAG_UPDATE;
+ pdev->restore_user->flags |= V4L2_CTRL_FLAG_UPDATE;
pdev->restore_factory = v4l2_ctrl_new_custom(hdl,
&pwc_restore_factory_cfg,
NULL);
if (pdev->restore_factory)
- pdev->restore_factory->flags = V4L2_CTRL_FLAG_UPDATE;
+ pdev->restore_factory->flags |= V4L2_CTRL_FLAG_UPDATE;
if (!(pdev->features & FEATURE_MOTOR_PANTILT))
return hdl->error;
@@ -563,8 +563,10 @@
switch (ctrl->id) {
case V4L2_CID_AUTO_WHITE_BALANCE:
- if (pdev->color_bal_valid && time_before(jiffies,
- pdev->last_color_bal_update + HZ / 4)) {
+ if (pdev->color_bal_valid &&
+ (pdev->auto_white_balance->val != awb_auto ||
+ time_before(jiffies,
+ pdev->last_color_bal_update + HZ / 4))) {
pdev->red_balance->val = pdev->last_red_balance;
pdev->blue_balance->val = pdev->last_blue_balance;
break;
@@ -630,7 +632,7 @@
static int pwc_set_awb(struct pwc_device *pdev)
{
- int ret = 0;
+ int ret;
if (pdev->auto_white_balance->is_new) {
ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
@@ -639,52 +641,34 @@
if (ret)
return ret;
- /* Update val when coming from auto or going to a preset */
- if (pdev->red_balance->is_volatile ||
- pdev->auto_white_balance->val == awb_indoor ||
- pdev->auto_white_balance->val == awb_outdoor ||
- pdev->auto_white_balance->val == awb_fl) {
- if (!pdev->red_balance->is_new)
- pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
- READ_RED_GAIN_FORMATTER,
- &pdev->red_balance->val);
- if (!pdev->blue_balance->is_new)
- pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
- READ_BLUE_GAIN_FORMATTER,
- &pdev->blue_balance->val);
- }
- if (pdev->auto_white_balance->val == awb_auto) {
- pdev->red_balance->is_volatile = true;
- pdev->blue_balance->is_volatile = true;
- pdev->color_bal_valid = false; /* Force cache update */
- } else {
- pdev->red_balance->is_volatile = false;
- pdev->blue_balance->is_volatile = false;
- }
- }
-
- if (ret == 0 && pdev->red_balance->is_new) {
if (pdev->auto_white_balance->val != awb_manual)
- return -EBUSY;
+ pdev->color_bal_valid = false; /* Force cache update */
+ }
+ if (pdev->auto_white_balance->val != awb_manual)
+ return 0;
+
+ if (pdev->red_balance->is_new) {
ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
PRESET_MANUAL_RED_GAIN_FORMATTER,
pdev->red_balance->val);
+ if (ret)
+ return ret;
}
- if (ret == 0 && pdev->blue_balance->is_new) {
- if (pdev->auto_white_balance->val != awb_manual)
- return -EBUSY;
+ if (pdev->blue_balance->is_new) {
ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
PRESET_MANUAL_BLUE_GAIN_FORMATTER,
pdev->blue_balance->val);
+ if (ret)
+ return ret;
}
- return ret;
+ return 0;
}
/* For CODEC2 models which have separate autogain and auto exposure */
static int pwc_set_autogain(struct pwc_device *pdev)
{
- int ret = 0;
+ int ret;
if (pdev->autogain->is_new) {
ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
@@ -692,27 +676,28 @@
pdev->autogain->val ? 0 : 0xff);
if (ret)
return ret;
+
if (pdev->autogain->val)
pdev->gain_valid = false; /* Force cache update */
- else if (!pdev->gain->is_new)
- pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
- READ_AGC_FORMATTER,
- &pdev->gain->val);
}
- if (ret == 0 && pdev->gain->is_new) {
- if (pdev->autogain->val)
- return -EBUSY;
+
+ if (pdev->autogain->val)
+ return 0;
+
+ if (pdev->gain->is_new) {
ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
PRESET_AGC_FORMATTER,
pdev->gain->val);
+ if (ret)
+ return ret;
}
- return ret;
+ return 0;
}
/* For CODEC2 models which have separate autogain and auto exposure */
static int pwc_set_exposure_auto(struct pwc_device *pdev)
{
- int ret = 0;
+ int ret;
int is_auto = pdev->exposure_auto->val == V4L2_EXPOSURE_AUTO;
if (pdev->exposure_auto->is_new) {
@@ -721,27 +706,28 @@
is_auto ? 0 : 0xff);
if (ret)
return ret;
+
if (is_auto)
pdev->exposure_valid = false; /* Force cache update */
- else if (!pdev->exposure->is_new)
- pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
- READ_SHUTTER_FORMATTER,
- &pdev->exposure->val);
}
- if (ret == 0 && pdev->exposure->is_new) {
- if (is_auto)
- return -EBUSY;
+
+ if (is_auto)
+ return 0;
+
+ if (pdev->exposure->is_new) {
ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL,
PRESET_SHUTTER_FORMATTER,
pdev->exposure->val);
+ if (ret)
+ return ret;
}
- return ret;
+ return 0;
}
/* For CODEC3 models which have autogain controlling both gain and exposure */
static int pwc_set_autogain_expo(struct pwc_device *pdev)
{
- int ret = 0;
+ int ret;
if (pdev->autogain->is_new) {
ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
@@ -749,35 +735,32 @@
pdev->autogain->val ? 0 : 0xff);
if (ret)
return ret;
+
if (pdev->autogain->val) {
pdev->gain_valid = false; /* Force cache update */
pdev->exposure_valid = false; /* Force cache update */
- } else {
- if (!pdev->gain->is_new)
- pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
- READ_AGC_FORMATTER,
- &pdev->gain->val);
- if (!pdev->exposure->is_new)
- pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
- READ_SHUTTER_FORMATTER,
- &pdev->exposure->val);
}
}
- if (ret == 0 && pdev->gain->is_new) {
- if (pdev->autogain->val)
- return -EBUSY;
+
+ if (pdev->autogain->val)
+ return 0;
+
+ if (pdev->gain->is_new) {
ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
PRESET_AGC_FORMATTER,
pdev->gain->val);
+ if (ret)
+ return ret;
}
- if (ret == 0 && pdev->exposure->is_new) {
- if (pdev->autogain->val)
- return -EBUSY;
+
+ if (pdev->exposure->is_new) {
ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL,
PRESET_SHUTTER_FORMATTER,
pdev->exposure->val);
+ if (ret)
+ return ret;
}
- return ret;
+ return 0;
}
static int pwc_set_motor(struct pwc_device *pdev)
@@ -878,10 +861,6 @@
pdev->autocontour->val ? 0 : 0xff);
}
if (ret == 0 && pdev->contour->is_new) {
- if (pdev->autocontour->val) {
- ret = -EBUSY;
- break;
- }
ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
PRESET_CONTOUR_FORMATTER,
pdev->contour->val);
@@ -1099,6 +1078,14 @@
return 0;
}
+static int pwc_log_status(struct file *file, void *priv)
+{
+ struct pwc_device *pdev = video_drvdata(file);
+
+ v4l2_ctrl_handler_log_status(&pdev->ctrl_handler, PWC_NAME);
+ return 0;
+}
+
static long pwc_default(struct file *file, void *fh, bool valid_prio,
int cmd, void *arg)
{
@@ -1122,6 +1109,7 @@
.vidioc_dqbuf = pwc_dqbuf,
.vidioc_streamon = pwc_streamon,
.vidioc_streamoff = pwc_streamoff,
+ .vidioc_log_status = pwc_log_status,
.vidioc_enum_framesizes = pwc_enum_framesizes,
.vidioc_enum_frameintervals = pwc_enum_frameintervals,
.vidioc_default = pwc_default,
diff --git a/drivers/media/video/s5p-fimc/Makefile b/drivers/media/video/s5p-fimc/Makefile
index df6954a..33dec7f 100644
--- a/drivers/media/video/s5p-fimc/Makefile
+++ b/drivers/media/video/s5p-fimc/Makefile
@@ -1,4 +1,4 @@
-s5p-fimc-objs := fimc-core.o fimc-reg.o fimc-capture.o
+s5p-fimc-objs := fimc-core.o fimc-reg.o fimc-capture.o fimc-mdevice.o
s5p-csis-objs := mipi-csis.o
obj-$(CONFIG_VIDEO_S5P_MIPI_CSIS) += s5p-csis.o
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 0d730e5..931f469 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -16,11 +16,9 @@
#include <linux/bug.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/list.h>
#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
@@ -29,135 +27,88 @@
#include <media/videobuf2-core.h>
#include <media/videobuf2-dma-contig.h>
+#include "fimc-mdevice.h"
#include "fimc-core.h"
-static struct v4l2_subdev *fimc_subdev_register(struct fimc_dev *fimc,
- struct s5p_fimc_isp_info *isp_info)
+static int fimc_init_capture(struct fimc_dev *fimc)
{
- struct i2c_adapter *i2c_adap;
- struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
- struct v4l2_subdev *sd = NULL;
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct fimc_sensor_info *sensor;
+ unsigned long flags;
+ int ret = 0;
- i2c_adap = i2c_get_adapter(isp_info->i2c_bus_num);
- if (!i2c_adap)
- return ERR_PTR(-ENOMEM);
-
- sd = v4l2_i2c_new_subdev_board(&vid_cap->v4l2_dev, i2c_adap,
- isp_info->board_info, NULL);
- if (!sd) {
- v4l2_err(&vid_cap->v4l2_dev, "failed to acquire subdev\n");
- return NULL;
- }
-
- v4l2_info(&vid_cap->v4l2_dev, "subdevice %s registered successfuly\n",
- isp_info->board_info->type);
-
- return sd;
-}
-
-static void fimc_subdev_unregister(struct fimc_dev *fimc)
-{
- struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
- struct i2c_client *client;
-
- if (vid_cap->input_index < 0)
- return; /* Subdevice already released or not registered. */
-
- if (vid_cap->sd) {
- v4l2_device_unregister_subdev(vid_cap->sd);
- client = v4l2_get_subdevdata(vid_cap->sd);
- i2c_unregister_device(client);
- i2c_put_adapter(client->adapter);
- vid_cap->sd = NULL;
- }
-
- vid_cap->input_index = -1;
-}
-
-/**
- * fimc_subdev_attach - attach v4l2_subdev to camera host interface
- *
- * @fimc: FIMC device information
- * @index: index to the array of available subdevices,
- * -1 for full array search or non negative value
- * to select specific subdevice
- */
-static int fimc_subdev_attach(struct fimc_dev *fimc, int index)
-{
- struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
- struct s5p_platform_fimc *pdata = fimc->pdata;
- struct s5p_fimc_isp_info *isp_info;
- struct v4l2_subdev *sd;
- int i;
-
- for (i = 0; i < pdata->num_clients; ++i) {
- isp_info = &pdata->isp_info[i];
-
- if (index >= 0 && i != index)
- continue;
-
- sd = fimc_subdev_register(fimc, isp_info);
- if (!IS_ERR_OR_NULL(sd)) {
- vid_cap->sd = sd;
- vid_cap->input_index = i;
-
- return 0;
- }
- }
-
- vid_cap->input_index = -1;
- vid_cap->sd = NULL;
- v4l2_err(&vid_cap->v4l2_dev, "fimc%d: sensor attach failed\n",
- fimc->id);
- return -ENODEV;
-}
-
-static int fimc_isp_subdev_init(struct fimc_dev *fimc, unsigned int index)
-{
- struct s5p_fimc_isp_info *isp_info;
- struct s5p_platform_fimc *pdata = fimc->pdata;
- int ret;
-
- if (index >= pdata->num_clients)
+ if (fimc->pipeline.sensor == NULL || ctx == NULL)
+ return -ENXIO;
+ if (ctx->s_frame.fmt == NULL)
return -EINVAL;
- isp_info = &pdata->isp_info[index];
+ sensor = v4l2_get_subdev_hostdata(fimc->pipeline.sensor);
- if (isp_info->clk_frequency)
- clk_set_rate(fimc->clock[CLK_CAM], isp_info->clk_frequency);
+ spin_lock_irqsave(&fimc->slock, flags);
+ fimc_prepare_dma_offset(ctx, &ctx->d_frame);
+ fimc_set_yuv_order(ctx);
- ret = clk_enable(fimc->clock[CLK_CAM]);
- if (ret)
- return ret;
+ fimc_hw_set_camera_polarity(fimc, sensor->pdata);
+ fimc_hw_set_camera_type(fimc, sensor->pdata);
+ fimc_hw_set_camera_source(fimc, sensor->pdata);
+ fimc_hw_set_camera_offset(fimc, &ctx->s_frame);
- ret = fimc_subdev_attach(fimc, index);
- if (ret)
- return ret;
-
- ret = fimc_hw_set_camera_polarity(fimc, isp_info);
- if (ret)
- return ret;
-
- ret = v4l2_subdev_call(fimc->vid_cap.sd, core, s_power, 1);
- if (!ret)
- return ret;
-
- /* enabling power failed so unregister subdev */
- fimc_subdev_unregister(fimc);
-
- v4l2_err(&fimc->vid_cap.v4l2_dev, "ISP initialization failed: %d\n",
- ret);
-
+ ret = fimc_set_scaler_info(ctx);
+ if (!ret) {
+ fimc_hw_set_input_path(ctx);
+ fimc_hw_set_prescaler(ctx);
+ fimc_hw_set_mainscaler(ctx);
+ fimc_hw_set_target_format(ctx);
+ fimc_hw_set_rotation(ctx);
+ fimc_hw_set_effect(ctx, false);
+ fimc_hw_set_output_path(ctx);
+ fimc_hw_set_out_dma(ctx);
+ clear_bit(ST_CAPT_APPLY_CFG, &fimc->state);
+ }
+ spin_unlock_irqrestore(&fimc->slock, flags);
return ret;
}
-static int fimc_stop_capture(struct fimc_dev *fimc)
+static int fimc_capture_state_cleanup(struct fimc_dev *fimc, bool suspend)
+{
+ struct fimc_vid_cap *cap = &fimc->vid_cap;
+ struct fimc_vid_buffer *buf;
+ unsigned long flags;
+ bool streaming;
+
+ spin_lock_irqsave(&fimc->slock, flags);
+ streaming = fimc->state & (1 << ST_CAPT_ISP_STREAM);
+
+ fimc->state &= ~(1 << ST_CAPT_RUN | 1 << ST_CAPT_SHUT |
+ 1 << ST_CAPT_STREAM | 1 << ST_CAPT_ISP_STREAM);
+ if (!suspend)
+ fimc->state &= ~(1 << ST_CAPT_PEND | 1 << ST_CAPT_SUSPENDED);
+
+ /* Release unused buffers */
+ while (!suspend && !list_empty(&cap->pending_buf_q)) {
+ buf = fimc_pending_queue_pop(cap);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+ }
+ /* If suspending put unused buffers onto pending queue */
+ while (!list_empty(&cap->active_buf_q)) {
+ buf = fimc_active_queue_pop(cap);
+ if (suspend)
+ fimc_pending_queue_add(cap, buf);
+ else
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+ }
+ set_bit(ST_CAPT_SUSPENDED, &fimc->state);
+ spin_unlock_irqrestore(&fimc->slock, flags);
+
+ if (streaming)
+ return fimc_pipeline_s_stream(fimc, 0);
+ else
+ return 0;
+}
+
+static int fimc_stop_capture(struct fimc_dev *fimc, bool suspend)
{
unsigned long flags;
- struct fimc_vid_cap *cap;
- struct fimc_vid_buffer *buf;
-
- cap = &fimc->vid_cap;
if (!fimc_capture_active(fimc))
return 0;
@@ -169,81 +120,73 @@
wait_event_timeout(fimc->irq_queue,
!test_bit(ST_CAPT_SHUT, &fimc->state),
- FIMC_SHUTDOWN_TIMEOUT);
+ (2*HZ/10)); /* 200 ms */
- v4l2_subdev_call(cap->sd, video, s_stream, 0);
-
- spin_lock_irqsave(&fimc->slock, flags);
- fimc->state &= ~(1 << ST_CAPT_RUN | 1 << ST_CAPT_PEND |
- 1 << ST_CAPT_SHUT | 1 << ST_CAPT_STREAM);
-
- fimc->vid_cap.active_buf_cnt = 0;
-
- /* Release buffers that were enqueued in the driver by videobuf2. */
- while (!list_empty(&cap->pending_buf_q)) {
- buf = pending_queue_pop(cap);
- vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
- }
-
- while (!list_empty(&cap->active_buf_q)) {
- buf = active_queue_pop(cap);
- vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
- }
-
- spin_unlock_irqrestore(&fimc->slock, flags);
-
- dbg("state: 0x%lx", fimc->state);
- return 0;
+ return fimc_capture_state_cleanup(fimc, suspend);
}
-static int start_streaming(struct vb2_queue *q)
+/**
+ * fimc_capture_config_update - apply the camera interface configuration
+ *
+ * To be called from within the interrupt handler with fimc.slock
+ * spinlock held. It updates the camera pixel crop, rotation and
+ * image flip in H/W.
+ */
+int fimc_capture_config_update(struct fimc_ctx *ctx)
{
- struct fimc_ctx *ctx = q->drv_priv;
struct fimc_dev *fimc = ctx->fimc_dev;
- struct s5p_fimc_isp_info *isp_info;
int ret;
- fimc_hw_reset(fimc);
+ if (test_bit(ST_CAPT_APPLY_CFG, &fimc->state))
+ return 0;
- ret = v4l2_subdev_call(fimc->vid_cap.sd, video, s_stream, 1);
- if (ret && ret != -ENOIOCTLCMD)
- return ret;
-
- ret = fimc_prepare_config(ctx, ctx->state);
- if (ret)
- return ret;
-
- isp_info = &fimc->pdata->isp_info[fimc->vid_cap.input_index];
- fimc_hw_set_camera_type(fimc, isp_info);
- fimc_hw_set_camera_source(fimc, isp_info);
+ spin_lock(&ctx->slock);
fimc_hw_set_camera_offset(fimc, &ctx->s_frame);
-
- if (ctx->state & FIMC_PARAMS) {
- ret = fimc_set_scaler_info(ctx);
- if (ret) {
- err("Scaler setup error");
- return ret;
- }
- fimc_hw_set_input_path(ctx);
+ ret = fimc_set_scaler_info(ctx);
+ if (ret == 0) {
fimc_hw_set_prescaler(ctx);
fimc_hw_set_mainscaler(ctx);
fimc_hw_set_target_format(ctx);
fimc_hw_set_rotation(ctx);
- fimc_hw_set_effect(ctx);
+ fimc_prepare_dma_offset(ctx, &ctx->d_frame);
+ fimc_hw_set_out_dma(ctx);
+ set_bit(ST_CAPT_APPLY_CFG, &fimc->state);
}
+ spin_unlock(&ctx->slock);
+ return ret;
+}
- fimc_hw_set_output_path(ctx);
- fimc_hw_set_out_dma(ctx);
+static int start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct fimc_ctx *ctx = q->drv_priv;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
+ int min_bufs;
+ int ret;
- INIT_LIST_HEAD(&fimc->vid_cap.pending_buf_q);
- INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q);
- fimc->vid_cap.active_buf_cnt = 0;
- fimc->vid_cap.frame_count = 0;
- fimc->vid_cap.buf_index = 0;
+ fimc_hw_reset(fimc);
+ vid_cap->frame_count = 0;
+
+ ret = fimc_init_capture(fimc);
+ if (ret)
+ goto error;
set_bit(ST_CAPT_PEND, &fimc->state);
+ min_bufs = fimc->vid_cap.reqbufs_count > 1 ? 2 : 1;
+
+ if (vid_cap->active_buf_cnt >= min_bufs &&
+ !test_and_set_bit(ST_CAPT_STREAM, &fimc->state)) {
+ fimc_activate_capture(ctx);
+
+ if (!test_and_set_bit(ST_CAPT_ISP_STREAM, &fimc->state))
+ fimc_pipeline_s_stream(fimc, 1);
+ }
+
return 0;
+error:
+ fimc_capture_state_cleanup(fimc, false);
+ return ret;
}
static int stop_streaming(struct vb2_queue *q)
@@ -254,7 +197,46 @@
if (!fimc_capture_active(fimc))
return -EINVAL;
- return fimc_stop_capture(fimc);
+ return fimc_stop_capture(fimc, false);
+}
+
+int fimc_capture_suspend(struct fimc_dev *fimc)
+{
+ bool suspend = fimc_capture_busy(fimc);
+
+ int ret = fimc_stop_capture(fimc, suspend);
+ if (ret)
+ return ret;
+ return fimc_pipeline_shutdown(fimc);
+}
+
+static void buffer_queue(struct vb2_buffer *vb);
+
+int fimc_capture_resume(struct fimc_dev *fimc)
+{
+ struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
+ struct fimc_vid_buffer *buf;
+ int i;
+
+ if (!test_and_clear_bit(ST_CAPT_SUSPENDED, &fimc->state))
+ return 0;
+
+ INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q);
+ vid_cap->buf_index = 0;
+ fimc_pipeline_initialize(fimc, &fimc->vid_cap.vfd->entity,
+ false);
+ fimc_init_capture(fimc);
+
+ clear_bit(ST_CAPT_SUSPENDED, &fimc->state);
+
+ for (i = 0; i < vid_cap->reqbufs_count; i++) {
+ if (list_empty(&vid_cap->pending_buf_q))
+ break;
+ buf = fimc_pending_queue_pop(vid_cap);
+ buffer_queue(&buf->vb);
+ }
+ return 0;
+
}
static unsigned int get_plane_size(struct fimc_frame *fr, unsigned int plane)
@@ -265,7 +247,7 @@
}
static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
- unsigned int *num_planes, unsigned long sizes[],
+ unsigned int *num_planes, unsigned int sizes[],
void *allocators[])
{
struct fimc_ctx *ctx = vq->drv_priv;
@@ -289,21 +271,20 @@
{
struct vb2_queue *vq = vb->vb2_queue;
struct fimc_ctx *ctx = vq->drv_priv;
- struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev;
int i;
- if (!ctx->d_frame.fmt || vq->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+ if (ctx->d_frame.fmt == NULL)
return -EINVAL;
for (i = 0; i < ctx->d_frame.fmt->memplanes; i++) {
- unsigned long size = get_plane_size(&ctx->d_frame, i);
+ unsigned long size = ctx->d_frame.payload[i];
if (vb2_plane_size(vb, i) < size) {
- v4l2_err(v4l2_dev, "User buffer too small (%ld < %ld)\n",
+ v4l2_err(ctx->fimc_dev->vid_cap.vfd,
+ "User buffer too small (%ld < %ld)\n",
vb2_plane_size(vb, i), size);
return -EINVAL;
}
-
vb2_set_plane_payload(vb, i, size);
}
@@ -312,10 +293,10 @@
static void buffer_queue(struct vb2_buffer *vb)
{
- struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
- struct fimc_dev *fimc = ctx->fimc_dev;
struct fimc_vid_buffer *buf
= container_of(vb, struct fimc_vid_buffer, vb);
+ struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct fimc_dev *fimc = ctx->fimc_dev;
struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
unsigned long flags;
int min_bufs;
@@ -323,15 +304,16 @@
spin_lock_irqsave(&fimc->slock, flags);
fimc_prepare_addr(ctx, &buf->vb, &ctx->d_frame, &buf->paddr);
- if (!test_bit(ST_CAPT_STREAM, &fimc->state)
- && vid_cap->active_buf_cnt < FIMC_MAX_OUT_BUFS) {
+ if (!test_bit(ST_CAPT_SUSPENDED, &fimc->state) &&
+ !test_bit(ST_CAPT_STREAM, &fimc->state) &&
+ vid_cap->active_buf_cnt < FIMC_MAX_OUT_BUFS) {
/* Setup the buffer directly for processing. */
int buf_id = (vid_cap->reqbufs_count == 1) ? -1 :
vid_cap->buf_index;
fimc_hw_set_output_addr(fimc, &buf->paddr, buf_id);
buf->index = vid_cap->buf_index;
- active_queue_add(vid_cap, buf);
+ fimc_active_queue_add(vid_cap, buf);
if (++vid_cap->buf_index >= FIMC_MAX_OUT_BUFS)
vid_cap->buf_index = 0;
@@ -341,10 +323,17 @@
min_bufs = vid_cap->reqbufs_count > 1 ? 2 : 1;
- if (vid_cap->active_buf_cnt >= min_bufs &&
- !test_and_set_bit(ST_CAPT_STREAM, &fimc->state))
- fimc_activate_capture(ctx);
+ if (vb2_is_streaming(&vid_cap->vbq) &&
+ vid_cap->active_buf_cnt >= min_bufs &&
+ !test_and_set_bit(ST_CAPT_STREAM, &fimc->state)) {
+ fimc_activate_capture(ctx);
+ spin_unlock_irqrestore(&fimc->slock, flags);
+
+ if (!test_and_set_bit(ST_CAPT_ISP_STREAM, &fimc->state))
+ fimc_pipeline_s_stream(fimc, 1);
+ return;
+ }
spin_unlock_irqrestore(&fimc->slock, flags);
}
@@ -370,10 +359,40 @@
.stop_streaming = stop_streaming,
};
+/**
+ * fimc_capture_ctrls_create - initialize the control handler
+ * Initialize the capture video node control handler and fill it
+ * with the FIMC controls. Inherit any sensor's controls if the
+ * 'user_subdev_api' flag is false (default behaviour).
+ * This function need to be called with the graph mutex held.
+ */
+int fimc_capture_ctrls_create(struct fimc_dev *fimc)
+{
+ struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
+ int ret;
+
+ if (WARN_ON(vid_cap->ctx == NULL))
+ return -ENXIO;
+ if (vid_cap->ctx->ctrls_rdy)
+ return 0;
+
+ ret = fimc_ctrls_create(vid_cap->ctx);
+ if (ret || vid_cap->user_subdev_api)
+ return ret;
+
+ return v4l2_ctrl_add_handler(&vid_cap->ctx->ctrl_handler,
+ fimc->pipeline.sensor->ctrl_handler);
+}
+
+static int fimc_capture_set_default_format(struct fimc_dev *fimc);
+
static int fimc_capture_open(struct file *file)
{
struct fimc_dev *fimc = video_drvdata(file);
- int ret = 0;
+ int ret = v4l2_fh_open(file);
+
+ if (ret)
+ return ret;
dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
@@ -381,17 +400,27 @@
if (fimc_m2m_active(fimc))
return -EBUSY;
+ set_bit(ST_CAPT_BUSY, &fimc->state);
+ pm_runtime_get_sync(&fimc->pdev->dev);
+
if (++fimc->vid_cap.refcnt == 1) {
- ret = fimc_isp_subdev_init(fimc, 0);
- if (ret) {
+ ret = fimc_pipeline_initialize(fimc,
+ &fimc->vid_cap.vfd->entity, true);
+ if (ret < 0) {
+ dev_err(&fimc->pdev->dev,
+ "Video pipeline initialization failed\n");
+ pm_runtime_put_sync(&fimc->pdev->dev);
fimc->vid_cap.refcnt--;
- return -EIO;
+ v4l2_fh_release(file);
+ clear_bit(ST_CAPT_BUSY, &fimc->state);
+ return ret;
}
+ ret = fimc_capture_ctrls_create(fimc);
+
+ if (!ret && !fimc->vid_cap.user_subdev_api)
+ ret = fimc_capture_set_default_format(fimc);
}
-
- file->private_data = fimc->vid_cap.ctx;
-
- return 0;
+ return ret;
}
static int fimc_capture_close(struct file *file)
@@ -401,37 +430,36 @@
dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
if (--fimc->vid_cap.refcnt == 0) {
- fimc_stop_capture(fimc);
- vb2_queue_release(&fimc->vid_cap.vbq);
-
- v4l2_err(&fimc->vid_cap.v4l2_dev, "releasing ISP\n");
-
- v4l2_subdev_call(fimc->vid_cap.sd, core, s_power, 0);
- clk_disable(fimc->clock[CLK_CAM]);
- fimc_subdev_unregister(fimc);
+ clear_bit(ST_CAPT_BUSY, &fimc->state);
+ fimc_stop_capture(fimc, false);
+ fimc_pipeline_shutdown(fimc);
+ clear_bit(ST_CAPT_SUSPENDED, &fimc->state);
}
- return 0;
+ pm_runtime_put(&fimc->pdev->dev);
+
+ if (fimc->vid_cap.refcnt == 0) {
+ vb2_queue_release(&fimc->vid_cap.vbq);
+ fimc_ctrls_delete(fimc->vid_cap.ctx);
+ }
+ return v4l2_fh_release(file);
}
static unsigned int fimc_capture_poll(struct file *file,
struct poll_table_struct *wait)
{
- struct fimc_ctx *ctx = file->private_data;
- struct fimc_dev *fimc = ctx->fimc_dev;
+ struct fimc_dev *fimc = video_drvdata(file);
return vb2_poll(&fimc->vid_cap.vbq, file, wait);
}
static int fimc_capture_mmap(struct file *file, struct vm_area_struct *vma)
{
- struct fimc_ctx *ctx = file->private_data;
- struct fimc_dev *fimc = ctx->fimc_dev;
+ struct fimc_dev *fimc = video_drvdata(file);
return vb2_mmap(&fimc->vid_cap.vbq, vma);
}
-/* video device file operations */
static const struct v4l2_file_operations fimc_capture_fops = {
.owner = THIS_MODULE,
.open = fimc_capture_open,
@@ -441,263 +469,553 @@
.mmap = fimc_capture_mmap,
};
+/*
+ * Format and crop negotiation helpers
+ */
+
+static struct fimc_fmt *fimc_capture_try_format(struct fimc_ctx *ctx,
+ u32 *width, u32 *height,
+ u32 *code, u32 *fourcc, int pad)
+{
+ bool rotation = ctx->rotation == 90 || ctx->rotation == 270;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct samsung_fimc_variant *var = fimc->variant;
+ struct fimc_pix_limit *pl = var->pix_limit;
+ struct fimc_frame *dst = &ctx->d_frame;
+ u32 depth, min_w, max_w, min_h, align_h = 3;
+ u32 mask = FMT_FLAGS_CAM;
+ struct fimc_fmt *ffmt;
+
+ /* Color conversion from/to JPEG is not supported */
+ if (code && ctx->s_frame.fmt && pad == FIMC_SD_PAD_SOURCE &&
+ fimc_fmt_is_jpeg(ctx->s_frame.fmt->color))
+ *code = V4L2_MBUS_FMT_JPEG_1X8;
+
+ if (fourcc && *fourcc != V4L2_PIX_FMT_JPEG && pad != FIMC_SD_PAD_SINK)
+ mask |= FMT_FLAGS_M2M;
+
+ ffmt = fimc_find_format(fourcc, code, mask, 0);
+ if (WARN_ON(!ffmt))
+ return NULL;
+ if (code)
+ *code = ffmt->mbus_code;
+ if (fourcc)
+ *fourcc = ffmt->fourcc;
+
+ if (pad == FIMC_SD_PAD_SINK) {
+ max_w = fimc_fmt_is_jpeg(ffmt->color) ?
+ pl->scaler_dis_w : pl->scaler_en_w;
+ /* Apply the camera input interface pixel constraints */
+ v4l_bound_align_image(width, max_t(u32, *width, 32), max_w, 4,
+ height, max_t(u32, *height, 32),
+ FIMC_CAMIF_MAX_HEIGHT,
+ fimc_fmt_is_jpeg(ffmt->color) ? 3 : 1,
+ 0);
+ return ffmt;
+ }
+ /* Can't scale or crop in transparent (JPEG) transfer mode */
+ if (fimc_fmt_is_jpeg(ffmt->color)) {
+ *width = ctx->s_frame.f_width;
+ *height = ctx->s_frame.f_height;
+ return ffmt;
+ }
+ /* Apply the scaler and the output DMA constraints */
+ max_w = rotation ? pl->out_rot_en_w : pl->out_rot_dis_w;
+ min_w = ctx->state & FIMC_DST_CROP ? dst->width : var->min_out_pixsize;
+ min_h = ctx->state & FIMC_DST_CROP ? dst->height : var->min_out_pixsize;
+ if (fimc->id == 1 && var->pix_hoff)
+ align_h = fimc_fmt_is_rgb(ffmt->color) ? 0 : 1;
+
+ depth = fimc_get_format_depth(ffmt);
+ v4l_bound_align_image(width, min_w, max_w,
+ ffs(var->min_out_pixsize) - 1,
+ height, min_h, FIMC_CAMIF_MAX_HEIGHT,
+ align_h,
+ 64/(ALIGN(depth, 8)));
+
+ dbg("pad%d: code: 0x%x, %dx%d. dst fmt: %dx%d",
+ pad, code ? *code : 0, *width, *height,
+ dst->f_width, dst->f_height);
+
+ return ffmt;
+}
+
+static void fimc_capture_try_crop(struct fimc_ctx *ctx, struct v4l2_rect *r,
+ int pad)
+{
+ bool rotate = ctx->rotation == 90 || ctx->rotation == 270;
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct samsung_fimc_variant *var = fimc->variant;
+ struct fimc_pix_limit *pl = var->pix_limit;
+ struct fimc_frame *sink = &ctx->s_frame;
+ u32 max_w, max_h, min_w = 0, min_h = 0, min_sz;
+ u32 align_sz = 0, align_h = 4;
+ u32 max_sc_h, max_sc_v;
+
+ /* In JPEG transparent transfer mode cropping is not supported */
+ if (fimc_fmt_is_jpeg(ctx->d_frame.fmt->color)) {
+ r->width = sink->f_width;
+ r->height = sink->f_height;
+ r->left = r->top = 0;
+ return;
+ }
+ if (pad == FIMC_SD_PAD_SOURCE) {
+ if (ctx->rotation != 90 && ctx->rotation != 270)
+ align_h = 1;
+ max_sc_h = min(SCALER_MAX_HRATIO, 1 << (ffs(sink->width) - 3));
+ max_sc_v = min(SCALER_MAX_VRATIO, 1 << (ffs(sink->height) - 1));
+ min_sz = var->min_out_pixsize;
+ } else {
+ u32 depth = fimc_get_format_depth(sink->fmt);
+ align_sz = 64/ALIGN(depth, 8);
+ min_sz = var->min_inp_pixsize;
+ min_w = min_h = min_sz;
+ max_sc_h = max_sc_v = 1;
+ }
+ /*
+ * For the crop rectangle at source pad the following constraints
+ * must be met:
+ * - it must fit in the sink pad format rectangle (f_width/f_height);
+ * - maximum downscaling ratio is 64;
+ * - maximum crop size depends if the rotator is used or not;
+ * - the sink pad format width/height must be 4 multiple of the
+ * prescaler ratios determined by sink pad size and source pad crop,
+ * the prescaler ratio is returned by fimc_get_scaler_factor().
+ */
+ max_w = min_t(u32,
+ rotate ? pl->out_rot_en_w : pl->out_rot_dis_w,
+ rotate ? sink->f_height : sink->f_width);
+ max_h = min_t(u32, FIMC_CAMIF_MAX_HEIGHT, sink->f_height);
+ if (pad == FIMC_SD_PAD_SOURCE) {
+ min_w = min_t(u32, max_w, sink->f_width / max_sc_h);
+ min_h = min_t(u32, max_h, sink->f_height / max_sc_v);
+ if (rotate) {
+ swap(max_sc_h, max_sc_v);
+ swap(min_w, min_h);
+ }
+ }
+ v4l_bound_align_image(&r->width, min_w, max_w, ffs(min_sz) - 1,
+ &r->height, min_h, max_h, align_h,
+ align_sz);
+ /* Adjust left/top if cropping rectangle is out of bounds */
+ r->left = clamp_t(u32, r->left, 0, sink->f_width - r->width);
+ r->top = clamp_t(u32, r->top, 0, sink->f_height - r->height);
+ r->left = round_down(r->left, var->hor_offs_align);
+
+ dbg("pad%d: (%d,%d)/%dx%d, sink fmt: %dx%d",
+ pad, r->left, r->top, r->width, r->height,
+ sink->f_width, sink->f_height);
+}
+
+/*
+ * The video node ioctl operations
+ */
static int fimc_vidioc_querycap_capture(struct file *file, void *priv,
struct v4l2_capability *cap)
{
- struct fimc_ctx *ctx = file->private_data;
- struct fimc_dev *fimc = ctx->fimc_dev;
+ struct fimc_dev *fimc = video_drvdata(file);
strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
cap->bus_info[0] = 0;
- cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
- V4L2_CAP_VIDEO_CAPTURE_MPLANE;
+ cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE_MPLANE;
return 0;
}
-/* Synchronize formats of the camera interface input and attached sensor. */
-static int sync_capture_fmt(struct fimc_ctx *ctx)
+static int fimc_cap_enum_fmt_mplane(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
{
- struct fimc_frame *frame = &ctx->s_frame;
- struct fimc_dev *fimc = ctx->fimc_dev;
- struct v4l2_mbus_framefmt *fmt = &fimc->vid_cap.fmt;
- int ret;
+ struct fimc_fmt *fmt;
- fmt->width = ctx->d_frame.o_width;
- fmt->height = ctx->d_frame.o_height;
-
- ret = v4l2_subdev_call(fimc->vid_cap.sd, video, s_mbus_fmt, fmt);
- if (ret == -ENOIOCTLCMD) {
- err("s_mbus_fmt failed");
- return ret;
- }
- dbg("w: %d, h: %d, code= %d", fmt->width, fmt->height, fmt->code);
-
- frame->fmt = find_mbus_format(fmt, FMT_FLAGS_CAM);
- if (!frame->fmt) {
- err("fimc source format not found\n");
+ fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_CAM | FMT_FLAGS_M2M,
+ f->index);
+ if (!fmt)
return -EINVAL;
+ strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+ f->pixelformat = fmt->fourcc;
+ if (fmt->fourcc == V4L2_MBUS_FMT_JPEG_1X8)
+ f->flags |= V4L2_FMT_FLAG_COMPRESSED;
+ return 0;
+}
+
+/**
+ * fimc_pipeline_try_format - negotiate and/or set formats at pipeline
+ * elements
+ * @ctx: FIMC capture context
+ * @tfmt: media bus format to try/set on subdevs
+ * @fmt_id: fimc pixel format id corresponding to returned @tfmt (output)
+ * @set: true to set format on subdevs, false to try only
+ */
+static int fimc_pipeline_try_format(struct fimc_ctx *ctx,
+ struct v4l2_mbus_framefmt *tfmt,
+ struct fimc_fmt **fmt_id,
+ bool set)
+{
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct v4l2_subdev *sd = fimc->pipeline.sensor;
+ struct v4l2_subdev *csis = fimc->pipeline.csis;
+ struct v4l2_subdev_format sfmt;
+ struct v4l2_mbus_framefmt *mf = &sfmt.format;
+ struct fimc_fmt *ffmt = NULL;
+ int ret, i = 0;
+
+ if (WARN_ON(!sd || !tfmt))
+ return -EINVAL;
+
+ memset(&sfmt, 0, sizeof(sfmt));
+ sfmt.format = *tfmt;
+
+ sfmt.which = set ? V4L2_SUBDEV_FORMAT_ACTIVE : V4L2_SUBDEV_FORMAT_TRY;
+ while (1) {
+ ffmt = fimc_find_format(NULL, mf->code != 0 ? &mf->code : NULL,
+ FMT_FLAGS_CAM, i++);
+ if (ffmt == NULL) {
+ /*
+ * Notify user-space if common pixel code for
+ * host and sensor does not exist.
+ */
+ return -EINVAL;
+ }
+ mf->code = tfmt->code = ffmt->mbus_code;
+
+ ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &sfmt);
+ if (ret)
+ return ret;
+ if (mf->code != tfmt->code) {
+ mf->code = 0;
+ continue;
+ }
+ if (mf->width != tfmt->width || mf->width != tfmt->width) {
+ u32 fcc = ffmt->fourcc;
+ tfmt->width = mf->width;
+ tfmt->height = mf->height;
+ ffmt = fimc_capture_try_format(ctx,
+ &tfmt->width, &tfmt->height,
+ NULL, &fcc, FIMC_SD_PAD_SOURCE);
+ if (ffmt && ffmt->mbus_code)
+ mf->code = ffmt->mbus_code;
+ if (mf->width != tfmt->width || mf->width != tfmt->width)
+ continue;
+ tfmt->code = mf->code;
+ }
+ if (csis)
+ ret = v4l2_subdev_call(csis, pad, set_fmt, NULL, &sfmt);
+
+ if (mf->code == tfmt->code &&
+ mf->width == tfmt->width && mf->width == tfmt->width)
+ break;
}
- frame->f_width = fmt->width;
- frame->f_height = fmt->height;
- frame->width = fmt->width;
- frame->height = fmt->height;
- frame->o_width = fmt->width;
- frame->o_height = fmt->height;
- frame->offs_h = 0;
- frame->offs_v = 0;
+ if (fmt_id && ffmt)
+ *fmt_id = ffmt;
+ *tfmt = *mf;
+ dbg("code: 0x%x, %dx%d, %p", mf->code, mf->width, mf->height, ffmt);
return 0;
}
+static int fimc_cap_g_fmt_mplane(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+
+ if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+ return -EINVAL;
+
+ return fimc_fill_format(&ctx->d_frame, f);
+}
+
+static int fimc_cap_try_fmt_mplane(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct v4l2_mbus_framefmt mf;
+ struct fimc_fmt *ffmt = NULL;
+
+ if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+ return -EINVAL;
+
+ if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
+ fimc_capture_try_format(ctx, &pix->width, &pix->height,
+ NULL, &pix->pixelformat,
+ FIMC_SD_PAD_SINK);
+ ctx->s_frame.f_width = pix->width;
+ ctx->s_frame.f_height = pix->height;
+ }
+ ffmt = fimc_capture_try_format(ctx, &pix->width, &pix->height,
+ NULL, &pix->pixelformat,
+ FIMC_SD_PAD_SOURCE);
+ if (!ffmt)
+ return -EINVAL;
+
+ if (!fimc->vid_cap.user_subdev_api) {
+ mf.width = pix->width;
+ mf.height = pix->height;
+ mf.code = ffmt->mbus_code;
+ fimc_md_graph_lock(fimc);
+ fimc_pipeline_try_format(ctx, &mf, &ffmt, false);
+ fimc_md_graph_unlock(fimc);
+
+ pix->width = mf.width;
+ pix->height = mf.height;
+ if (ffmt)
+ pix->pixelformat = ffmt->fourcc;
+ }
+
+ fimc_adjust_mplane_format(ffmt, pix->width, pix->height, pix);
+ return 0;
+}
+
+static void fimc_capture_mark_jpeg_xfer(struct fimc_ctx *ctx, bool jpeg)
+{
+ ctx->scaler.enabled = !jpeg;
+ fimc_ctrls_activate(ctx, !jpeg);
+
+ if (jpeg)
+ set_bit(ST_CAPT_JPEG, &ctx->fimc_dev->state);
+ else
+ clear_bit(ST_CAPT_JPEG, &ctx->fimc_dev->state);
+}
+
+static int fimc_capture_set_format(struct fimc_dev *fimc, struct v4l2_format *f)
+{
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+ struct v4l2_mbus_framefmt *mf = &fimc->vid_cap.mf;
+ struct fimc_frame *ff = &ctx->d_frame;
+ struct fimc_fmt *s_fmt = NULL;
+ int ret, i;
+
+ if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+ return -EINVAL;
+ if (vb2_is_busy(&fimc->vid_cap.vbq))
+ return -EBUSY;
+
+ /* Pre-configure format at camera interface input, for JPEG only */
+ if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
+ fimc_capture_try_format(ctx, &pix->width, &pix->height,
+ NULL, &pix->pixelformat,
+ FIMC_SD_PAD_SINK);
+ ctx->s_frame.f_width = pix->width;
+ ctx->s_frame.f_height = pix->height;
+ }
+ /* Try the format at the scaler and the DMA output */
+ ff->fmt = fimc_capture_try_format(ctx, &pix->width, &pix->height,
+ NULL, &pix->pixelformat,
+ FIMC_SD_PAD_SOURCE);
+ if (!ff->fmt)
+ return -EINVAL;
+ /* Try to match format at the host and the sensor */
+ if (!fimc->vid_cap.user_subdev_api) {
+ mf->code = ff->fmt->mbus_code;
+ mf->width = pix->width;
+ mf->height = pix->height;
+
+ fimc_md_graph_lock(fimc);
+ ret = fimc_pipeline_try_format(ctx, mf, &s_fmt, true);
+ fimc_md_graph_unlock(fimc);
+ if (ret)
+ return ret;
+ pix->width = mf->width;
+ pix->height = mf->height;
+ }
+ fimc_adjust_mplane_format(ff->fmt, pix->width, pix->height, pix);
+ for (i = 0; i < ff->fmt->colplanes; i++)
+ ff->payload[i] =
+ (pix->width * pix->height * ff->fmt->depth[i]) / 8;
+
+ set_frame_bounds(ff, pix->width, pix->height);
+ /* Reset the composition rectangle if not yet configured */
+ if (!(ctx->state & FIMC_DST_CROP))
+ set_frame_crop(ff, 0, 0, pix->width, pix->height);
+
+ fimc_capture_mark_jpeg_xfer(ctx, fimc_fmt_is_jpeg(ff->fmt->color));
+
+ /* Reset cropping and set format at the camera interface input */
+ if (!fimc->vid_cap.user_subdev_api) {
+ ctx->s_frame.fmt = s_fmt;
+ set_frame_bounds(&ctx->s_frame, pix->width, pix->height);
+ set_frame_crop(&ctx->s_frame, 0, 0, pix->width, pix->height);
+ }
+
+ return ret;
+}
+
static int fimc_cap_s_fmt_mplane(struct file *file, void *priv,
struct v4l2_format *f)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_dev *fimc = ctx->fimc_dev;
- struct fimc_frame *frame;
- struct v4l2_pix_format_mplane *pix;
- int ret;
- int i;
+ struct fimc_dev *fimc = video_drvdata(file);
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
- ret = fimc_vidioc_try_fmt_mplane(file, priv, f);
- if (ret)
- return ret;
-
- if (vb2_is_busy(&fimc->vid_cap.vbq) || fimc_capture_active(fimc))
- return -EBUSY;
-
- frame = &ctx->d_frame;
-
- pix = &f->fmt.pix_mp;
- frame->fmt = find_format(f, FMT_FLAGS_M2M | FMT_FLAGS_CAM);
- if (!frame->fmt) {
- err("fimc target format not found\n");
- return -EINVAL;
- }
-
- for (i = 0; i < frame->fmt->colplanes; i++) {
- frame->payload[i] =
- (pix->width * pix->height * frame->fmt->depth[i]) >> 3;
- }
-
- /* Output DMA frame pixel size and offsets. */
- frame->f_width = pix->plane_fmt[0].bytesperline * 8
- / frame->fmt->depth[0];
- frame->f_height = pix->height;
- frame->width = pix->width;
- frame->height = pix->height;
- frame->o_width = pix->width;
- frame->o_height = pix->height;
- frame->offs_h = 0;
- frame->offs_v = 0;
-
- ctx->state |= (FIMC_PARAMS | FIMC_DST_FMT);
-
- ret = sync_capture_fmt(ctx);
- return ret;
+ return fimc_capture_set_format(fimc, f);
}
static int fimc_cap_enum_input(struct file *file, void *priv,
- struct v4l2_input *i)
+ struct v4l2_input *i)
{
- struct fimc_ctx *ctx = priv;
- struct s5p_platform_fimc *pldata = ctx->fimc_dev->pdata;
- struct s5p_fimc_isp_info *isp_info;
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct v4l2_subdev *sd = fimc->pipeline.sensor;
- if (i->index >= pldata->num_clients)
+ if (i->index != 0)
return -EINVAL;
- isp_info = &pldata->isp_info[i->index];
-
i->type = V4L2_INPUT_TYPE_CAMERA;
- strncpy(i->name, isp_info->board_info->type, 32);
+ if (sd)
+ strlcpy(i->name, sd->name, sizeof(i->name));
return 0;
}
-static int fimc_cap_s_input(struct file *file, void *priv,
- unsigned int i)
+static int fimc_cap_s_input(struct file *file, void *priv, unsigned int i)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_dev *fimc = ctx->fimc_dev;
- struct s5p_platform_fimc *pdata = fimc->pdata;
-
- if (fimc_capture_active(ctx->fimc_dev))
- return -EBUSY;
-
- if (i >= pdata->num_clients)
- return -EINVAL;
-
-
- if (fimc->vid_cap.sd) {
- int ret = v4l2_subdev_call(fimc->vid_cap.sd, core, s_power, 0);
- if (ret)
- err("s_power failed: %d", ret);
-
- clk_disable(fimc->clock[CLK_CAM]);
- }
-
- /* Release the attached sensor subdevice. */
- fimc_subdev_unregister(fimc);
-
- return fimc_isp_subdev_init(fimc, i);
+ return i == 0 ? i : -EINVAL;
}
-static int fimc_cap_g_input(struct file *file, void *priv,
- unsigned int *i)
+static int fimc_cap_g_input(struct file *file, void *priv, unsigned int *i)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_vid_cap *cap = &ctx->fimc_dev->vid_cap;
+ *i = 0;
+ return 0;
+}
- *i = cap->input_index;
+/**
+ * fimc_pipeline_validate - check for formats inconsistencies
+ * between source and sink pad of each link
+ *
+ * Return 0 if all formats match or -EPIPE otherwise.
+ */
+static int fimc_pipeline_validate(struct fimc_dev *fimc)
+{
+ struct v4l2_subdev_format sink_fmt, src_fmt;
+ struct fimc_vid_cap *vid_cap = &fimc->vid_cap;
+ struct v4l2_subdev *sd;
+ struct media_pad *pad;
+ int ret;
+
+ /* Start with the video capture node pad */
+ pad = media_entity_remote_source(&vid_cap->vd_pad);
+ if (pad == NULL)
+ return -EPIPE;
+ /* FIMC.{N} subdevice */
+ sd = media_entity_to_v4l2_subdev(pad->entity);
+
+ while (1) {
+ /* Retrieve format at the sink pad */
+ pad = &sd->entity.pads[0];
+ if (!(pad->flags & MEDIA_PAD_FL_SINK))
+ break;
+ /* Don't call FIMC subdev operation to avoid nested locking */
+ if (sd == fimc->vid_cap.subdev) {
+ struct fimc_frame *ff = &vid_cap->ctx->s_frame;
+ sink_fmt.format.width = ff->f_width;
+ sink_fmt.format.height = ff->f_height;
+ sink_fmt.format.code = ff->fmt ? ff->fmt->mbus_code : 0;
+ } else {
+ sink_fmt.pad = pad->index;
+ sink_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sink_fmt);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
+ return -EPIPE;
+ }
+ /* Retrieve format at the source pad */
+ pad = media_entity_remote_source(pad);
+ if (pad == NULL ||
+ media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+ break;
+
+ sd = media_entity_to_v4l2_subdev(pad->entity);
+ src_fmt.pad = pad->index;
+ src_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &src_fmt);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
+ return -EPIPE;
+
+ if (src_fmt.format.width != sink_fmt.format.width ||
+ src_fmt.format.height != sink_fmt.format.height ||
+ src_fmt.format.code != sink_fmt.format.code)
+ return -EPIPE;
+ }
return 0;
}
static int fimc_cap_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_dev *fimc = ctx->fimc_dev;
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_pipeline *p = &fimc->pipeline;
+ int ret;
- if (fimc_capture_active(fimc) || !fimc->vid_cap.sd)
+ if (fimc_capture_active(fimc))
return -EBUSY;
- if (!(ctx->state & FIMC_DST_FMT)) {
- v4l2_err(&fimc->vid_cap.v4l2_dev, "Format is not set\n");
- return -EINVAL;
- }
+ media_entity_pipeline_start(&p->sensor->entity, p->pipe);
+ if (fimc->vid_cap.user_subdev_api) {
+ ret = fimc_pipeline_validate(fimc);
+ if (ret)
+ return ret;
+ }
return vb2_streamon(&fimc->vid_cap.vbq, type);
}
static int fimc_cap_streamoff(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_dev *fimc = ctx->fimc_dev;
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct v4l2_subdev *sd = fimc->pipeline.sensor;
+ int ret;
- return vb2_streamoff(&fimc->vid_cap.vbq, type);
+ ret = vb2_streamoff(&fimc->vid_cap.vbq, type);
+ if (ret == 0)
+ media_entity_pipeline_stop(&sd->entity);
+ return ret;
}
static int fimc_cap_reqbufs(struct file *file, void *priv,
struct v4l2_requestbuffers *reqbufs)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_vid_cap *cap = &ctx->fimc_dev->vid_cap;
- int ret;
+ struct fimc_dev *fimc = video_drvdata(file);
+ int ret = vb2_reqbufs(&fimc->vid_cap.vbq, reqbufs);
-
- ret = vb2_reqbufs(&cap->vbq, reqbufs);
if (!ret)
- cap->reqbufs_count = reqbufs->count;
-
+ fimc->vid_cap.reqbufs_count = reqbufs->count;
return ret;
}
static int fimc_cap_querybuf(struct file *file, void *priv,
struct v4l2_buffer *buf)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_vid_cap *cap = &ctx->fimc_dev->vid_cap;
+ struct fimc_dev *fimc = video_drvdata(file);
- return vb2_querybuf(&cap->vbq, buf);
+ return vb2_querybuf(&fimc->vid_cap.vbq, buf);
}
static int fimc_cap_qbuf(struct file *file, void *priv,
struct v4l2_buffer *buf)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_vid_cap *cap = &ctx->fimc_dev->vid_cap;
- return vb2_qbuf(&cap->vbq, buf);
+ struct fimc_dev *fimc = video_drvdata(file);
+
+ return vb2_qbuf(&fimc->vid_cap.vbq, buf);
}
static int fimc_cap_dqbuf(struct file *file, void *priv,
struct v4l2_buffer *buf)
{
- struct fimc_ctx *ctx = priv;
- return vb2_dqbuf(&ctx->fimc_dev->vid_cap.vbq, buf,
- file->f_flags & O_NONBLOCK);
-}
+ struct fimc_dev *fimc = video_drvdata(file);
-static int fimc_cap_s_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
-{
- struct fimc_ctx *ctx = priv;
- int ret = -EINVAL;
-
- /* Allow any controls but 90/270 rotation while streaming */
- if (!fimc_capture_active(ctx->fimc_dev) ||
- ctrl->id != V4L2_CID_ROTATE ||
- (ctrl->value != 90 && ctrl->value != 270)) {
- ret = check_ctrl_val(ctx, ctrl);
- if (!ret) {
- ret = fimc_s_ctrl(ctx, ctrl);
- if (!ret)
- ctx->state |= FIMC_PARAMS;
- }
- }
- if (ret == -EINVAL)
- ret = v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd,
- core, s_ctrl, ctrl);
- return ret;
+ return vb2_dqbuf(&fimc->vid_cap.vbq, buf, file->f_flags & O_NONBLOCK);
}
static int fimc_cap_cropcap(struct file *file, void *fh,
struct v4l2_cropcap *cr)
{
- struct fimc_frame *f;
- struct fimc_ctx *ctx = fh;
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame;
if (cr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
return -EINVAL;
- f = &ctx->s_frame;
-
cr->bounds.left = 0;
cr->bounds.top = 0;
cr->bounds.width = f->o_width;
@@ -709,10 +1027,8 @@
static int fimc_cap_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
{
- struct fimc_frame *f;
- struct fimc_ctx *ctx = file->private_data;
-
- f = &ctx->s_frame;
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame;
cr->c.left = f->offs_h;
cr->c.top = f->offs_v;
@@ -722,53 +1038,31 @@
return 0;
}
-static int fimc_cap_s_crop(struct file *file, void *fh,
- struct v4l2_crop *cr)
+static int fimc_cap_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
{
- struct fimc_frame *f;
- struct fimc_ctx *ctx = file->private_data;
- struct fimc_dev *fimc = ctx->fimc_dev;
- int ret = -EINVAL;
+ struct fimc_dev *fimc = video_drvdata(file);
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct fimc_frame *ff;
+ unsigned long flags;
- if (fimc_capture_active(fimc))
- return -EBUSY;
+ fimc_capture_try_crop(ctx, &cr->c, FIMC_SD_PAD_SINK);
+ ff = &ctx->s_frame;
- ret = fimc_try_crop(ctx, cr);
- if (ret)
- return ret;
-
- if (!(ctx->state & FIMC_DST_FMT)) {
- v4l2_err(&fimc->vid_cap.v4l2_dev,
- "Capture color format not set\n");
- return -EINVAL; /* TODO: make sure this is the right value */
- }
-
- f = &ctx->s_frame;
- /* Check for the pixel scaling ratio when cropping input image. */
- ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height,
- ctx->d_frame.width, ctx->d_frame.height,
- ctx->rotation);
- if (ret) {
- v4l2_err(&fimc->vid_cap.v4l2_dev, "Out of the scaler range\n");
- return ret;
- }
-
- f->offs_h = cr->c.left;
- f->offs_v = cr->c.top;
- f->width = cr->c.width;
- f->height = cr->c.height;
+ spin_lock_irqsave(&fimc->slock, flags);
+ set_frame_crop(ff, cr->c.left, cr->c.top, cr->c.width, cr->c.height);
+ set_bit(ST_CAPT_APPLY_CFG, &fimc->state);
+ spin_unlock_irqrestore(&fimc->slock, flags);
return 0;
}
-
static const struct v4l2_ioctl_ops fimc_capture_ioctl_ops = {
.vidioc_querycap = fimc_vidioc_querycap_capture,
- .vidioc_enum_fmt_vid_cap_mplane = fimc_vidioc_enum_fmt_mplane,
- .vidioc_try_fmt_vid_cap_mplane = fimc_vidioc_try_fmt_mplane,
+ .vidioc_enum_fmt_vid_cap_mplane = fimc_cap_enum_fmt_mplane,
+ .vidioc_try_fmt_vid_cap_mplane = fimc_cap_try_fmt_mplane,
.vidioc_s_fmt_vid_cap_mplane = fimc_cap_s_fmt_mplane,
- .vidioc_g_fmt_vid_cap_mplane = fimc_vidioc_g_fmt_mplane,
+ .vidioc_g_fmt_vid_cap_mplane = fimc_cap_g_fmt_mplane,
.vidioc_reqbufs = fimc_cap_reqbufs,
.vidioc_querybuf = fimc_cap_querybuf,
@@ -779,10 +1073,6 @@
.vidioc_streamon = fimc_cap_streamon,
.vidioc_streamoff = fimc_cap_streamoff,
- .vidioc_queryctrl = fimc_vidioc_queryctrl,
- .vidioc_g_ctrl = fimc_vidioc_g_ctrl,
- .vidioc_s_ctrl = fimc_cap_s_ctrl,
-
.vidioc_g_crop = fimc_cap_g_crop,
.vidioc_s_crop = fimc_cap_s_crop,
.vidioc_cropcap = fimc_cap_cropcap,
@@ -792,17 +1082,328 @@
.vidioc_g_input = fimc_cap_g_input,
};
-/* fimc->lock must be already initialized */
-int fimc_register_capture_device(struct fimc_dev *fimc)
+/* Capture subdev media entity operations */
+static int fimc_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
{
- struct v4l2_device *v4l2_dev = &fimc->vid_cap.v4l2_dev;
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+ struct fimc_dev *fimc = v4l2_get_subdevdata(sd);
+
+ if (media_entity_type(remote->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+ return -EINVAL;
+
+ if (WARN_ON(fimc == NULL))
+ return 0;
+
+ dbg("%s --> %s, flags: 0x%x. input: 0x%x",
+ local->entity->name, remote->entity->name, flags,
+ fimc->vid_cap.input);
+
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (fimc->vid_cap.input != 0)
+ return -EBUSY;
+ fimc->vid_cap.input = sd->grp_id;
+ return 0;
+ }
+
+ fimc->vid_cap.input = 0;
+ return 0;
+}
+
+static const struct media_entity_operations fimc_sd_media_ops = {
+ .link_setup = fimc_link_setup,
+};
+
+/**
+ * fimc_sensor_notify - v4l2_device notification from a sensor subdev
+ * @sd: pointer to a subdev generating the notification
+ * @notification: the notification type, must be S5P_FIMC_TX_END_NOTIFY
+ * @arg: pointer to an u32 type integer that stores the frame payload value
+ *
+ * The End Of Frame notification sent by sensor subdev in its still capture
+ * mode. If there is only a single VSYNC generated by the sensor at the
+ * beginning of a frame transmission, FIMC does not issue the LastIrq
+ * (end of frame) interrupt. And this notification is used to complete the
+ * frame capture and returning a buffer to user-space. Subdev drivers should
+ * call this notification from their last 'End of frame capture' interrupt.
+ */
+void fimc_sensor_notify(struct v4l2_subdev *sd, unsigned int notification,
+ void *arg)
+{
+ struct fimc_sensor_info *sensor;
+ struct fimc_vid_buffer *buf;
+ struct fimc_md *fmd;
+ struct fimc_dev *fimc;
+ unsigned long flags;
+
+ if (sd == NULL)
+ return;
+
+ sensor = v4l2_get_subdev_hostdata(sd);
+ fmd = entity_to_fimc_mdev(&sd->entity);
+
+ spin_lock_irqsave(&fmd->slock, flags);
+ fimc = sensor ? sensor->host : NULL;
+
+ if (fimc && arg && notification == S5P_FIMC_TX_END_NOTIFY &&
+ test_bit(ST_CAPT_PEND, &fimc->state)) {
+ unsigned long irq_flags;
+ spin_lock_irqsave(&fimc->slock, irq_flags);
+ if (!list_empty(&fimc->vid_cap.active_buf_q)) {
+ buf = list_entry(fimc->vid_cap.active_buf_q.next,
+ struct fimc_vid_buffer, list);
+ vb2_set_plane_payload(&buf->vb, 0, *((u32 *)arg));
+ }
+ fimc_capture_irq_handler(fimc, true);
+ fimc_deactivate_capture(fimc);
+ spin_unlock_irqrestore(&fimc->slock, irq_flags);
+ }
+ spin_unlock_irqrestore(&fmd->slock, flags);
+}
+
+static int fimc_subdev_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct fimc_fmt *fmt;
+
+ fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_CAM, code->index);
+ if (!fmt)
+ return -EINVAL;
+ code->code = fmt->mbus_code;
+ return 0;
+}
+
+static int fimc_subdev_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct fimc_dev *fimc = v4l2_get_subdevdata(sd);
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct v4l2_mbus_framefmt *mf;
+ struct fimc_frame *ff;
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ mf = v4l2_subdev_get_try_format(fh, fmt->pad);
+ fmt->format = *mf;
+ return 0;
+ }
+ mf = &fmt->format;
+ mf->colorspace = V4L2_COLORSPACE_JPEG;
+ ff = fmt->pad == FIMC_SD_PAD_SINK ? &ctx->s_frame : &ctx->d_frame;
+
+ mutex_lock(&fimc->lock);
+ /* The pixel code is same on both input and output pad */
+ if (!WARN_ON(ctx->s_frame.fmt == NULL))
+ mf->code = ctx->s_frame.fmt->mbus_code;
+ mf->width = ff->f_width;
+ mf->height = ff->f_height;
+ mutex_unlock(&fimc->lock);
+
+ return 0;
+}
+
+static int fimc_subdev_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct fimc_dev *fimc = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *mf = &fmt->format;
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct fimc_frame *ff;
+ struct fimc_fmt *ffmt;
+
+ dbg("pad%d: code: 0x%x, %dx%d",
+ fmt->pad, mf->code, mf->width, mf->height);
+
+ if (fmt->pad == FIMC_SD_PAD_SOURCE &&
+ vb2_is_busy(&fimc->vid_cap.vbq))
+ return -EBUSY;
+
+ mutex_lock(&fimc->lock);
+ ffmt = fimc_capture_try_format(ctx, &mf->width, &mf->height,
+ &mf->code, NULL, fmt->pad);
+ mutex_unlock(&fimc->lock);
+ mf->colorspace = V4L2_COLORSPACE_JPEG;
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ mf = v4l2_subdev_get_try_format(fh, fmt->pad);
+ *mf = fmt->format;
+ return 0;
+ }
+ fimc_capture_mark_jpeg_xfer(ctx, fimc_fmt_is_jpeg(ffmt->color));
+
+ ff = fmt->pad == FIMC_SD_PAD_SINK ?
+ &ctx->s_frame : &ctx->d_frame;
+
+ mutex_lock(&fimc->lock);
+ set_frame_bounds(ff, mf->width, mf->height);
+ ff->fmt = ffmt;
+
+ /* Reset the crop rectangle if required. */
+ if (!(fmt->pad == FIMC_SD_PAD_SOURCE && (ctx->state & FIMC_DST_CROP)))
+ set_frame_crop(ff, 0, 0, mf->width, mf->height);
+
+ if (fmt->pad == FIMC_SD_PAD_SINK)
+ ctx->state &= ~FIMC_DST_CROP;
+ mutex_unlock(&fimc->lock);
+ return 0;
+}
+
+static int fimc_subdev_get_crop(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct fimc_dev *fimc = v4l2_get_subdevdata(sd);
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct v4l2_rect *r = &crop->rect;
+ struct fimc_frame *ff;
+
+ if (crop->which == V4L2_SUBDEV_FORMAT_TRY) {
+ crop->rect = *v4l2_subdev_get_try_crop(fh, crop->pad);
+ return 0;
+ }
+ ff = crop->pad == FIMC_SD_PAD_SINK ?
+ &ctx->s_frame : &ctx->d_frame;
+
+ mutex_lock(&fimc->lock);
+ r->left = ff->offs_h;
+ r->top = ff->offs_v;
+ r->width = ff->width;
+ r->height = ff->height;
+ mutex_unlock(&fimc->lock);
+
+ dbg("ff:%p, pad%d: l:%d, t:%d, %dx%d, f_w: %d, f_h: %d",
+ ff, crop->pad, r->left, r->top, r->width, r->height,
+ ff->f_width, ff->f_height);
+
+ return 0;
+}
+
+static int fimc_subdev_set_crop(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct fimc_dev *fimc = v4l2_get_subdevdata(sd);
+ struct fimc_ctx *ctx = fimc->vid_cap.ctx;
+ struct v4l2_rect *r = &crop->rect;
+ struct fimc_frame *ff;
+ unsigned long flags;
+
+ dbg("(%d,%d)/%dx%d", r->left, r->top, r->width, r->height);
+
+ ff = crop->pad == FIMC_SD_PAD_SOURCE ?
+ &ctx->d_frame : &ctx->s_frame;
+
+ mutex_lock(&fimc->lock);
+ fimc_capture_try_crop(ctx, r, crop->pad);
+
+ if (crop->which == V4L2_SUBDEV_FORMAT_TRY) {
+ mutex_lock(&fimc->lock);
+ *v4l2_subdev_get_try_crop(fh, crop->pad) = *r;
+ return 0;
+ }
+ spin_lock_irqsave(&fimc->slock, flags);
+ set_frame_crop(ff, r->left, r->top, r->width, r->height);
+ if (crop->pad == FIMC_SD_PAD_SOURCE)
+ ctx->state |= FIMC_DST_CROP;
+
+ set_bit(ST_CAPT_APPLY_CFG, &fimc->state);
+ spin_unlock_irqrestore(&fimc->slock, flags);
+
+ dbg("pad%d: (%d,%d)/%dx%d", crop->pad, r->left, r->top,
+ r->width, r->height);
+
+ mutex_unlock(&fimc->lock);
+ return 0;
+}
+
+static struct v4l2_subdev_pad_ops fimc_subdev_pad_ops = {
+ .enum_mbus_code = fimc_subdev_enum_mbus_code,
+ .get_fmt = fimc_subdev_get_fmt,
+ .set_fmt = fimc_subdev_set_fmt,
+ .get_crop = fimc_subdev_get_crop,
+ .set_crop = fimc_subdev_set_crop,
+};
+
+static struct v4l2_subdev_ops fimc_subdev_ops = {
+ .pad = &fimc_subdev_pad_ops,
+};
+
+static int fimc_create_capture_subdev(struct fimc_dev *fimc,
+ struct v4l2_device *v4l2_dev)
+{
+ struct v4l2_subdev *sd;
+ int ret;
+
+ sd = kzalloc(sizeof(*sd), GFP_KERNEL);
+ if (!sd)
+ return -ENOMEM;
+
+ v4l2_subdev_init(sd, &fimc_subdev_ops);
+ sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+ snprintf(sd->name, sizeof(sd->name), "FIMC.%d", fimc->pdev->id);
+
+ fimc->vid_cap.sd_pads[FIMC_SD_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ fimc->vid_cap.sd_pads[FIMC_SD_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&sd->entity, FIMC_SD_PADS_NUM,
+ fimc->vid_cap.sd_pads, 0);
+ if (ret)
+ goto me_err;
+ ret = v4l2_device_register_subdev(v4l2_dev, sd);
+ if (ret)
+ goto sd_err;
+
+ fimc->vid_cap.subdev = sd;
+ v4l2_set_subdevdata(sd, fimc);
+ sd->entity.ops = &fimc_sd_media_ops;
+ return 0;
+sd_err:
+ media_entity_cleanup(&sd->entity);
+me_err:
+ kfree(sd);
+ return ret;
+}
+
+static void fimc_destroy_capture_subdev(struct fimc_dev *fimc)
+{
+ struct v4l2_subdev *sd = fimc->vid_cap.subdev;
+
+ if (!sd)
+ return;
+ media_entity_cleanup(&sd->entity);
+ v4l2_device_unregister_subdev(sd);
+ kfree(sd);
+ sd = NULL;
+}
+
+/* Set default format at the sensor and host interface */
+static int fimc_capture_set_default_format(struct fimc_dev *fimc)
+{
+ struct v4l2_format fmt = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
+ .fmt.pix_mp = {
+ .width = 640,
+ .height = 480,
+ .pixelformat = V4L2_PIX_FMT_YUYV,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ },
+ };
+
+ return fimc_capture_set_format(fimc, &fmt);
+}
+
+/* fimc->lock must be already initialized */
+int fimc_register_capture_device(struct fimc_dev *fimc,
+ struct v4l2_device *v4l2_dev)
+{
struct video_device *vfd;
struct fimc_vid_cap *vid_cap;
struct fimc_ctx *ctx;
- struct v4l2_format f;
- struct fimc_frame *fr;
struct vb2_queue *q;
- int ret;
+ int ret = -ENOMEM;
ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
if (!ctx)
@@ -812,33 +1413,21 @@
ctx->in_path = FIMC_CAMERA;
ctx->out_path = FIMC_DMA;
ctx->state = FIMC_CTX_CAP;
-
- /* Default format of the output frames */
- f.fmt.pix.pixelformat = V4L2_PIX_FMT_RGB32;
- fr = &ctx->d_frame;
- fr->fmt = find_format(&f, FMT_FLAGS_M2M);
- fr->width = fr->f_width = fr->o_width = 640;
- fr->height = fr->f_height = fr->o_height = 480;
-
- if (!v4l2_dev->name[0])
- snprintf(v4l2_dev->name, sizeof(v4l2_dev->name),
- "%s.capture", dev_name(&fimc->pdev->dev));
-
- ret = v4l2_device_register(NULL, v4l2_dev);
- if (ret)
- goto err_info;
+ ctx->s_frame.fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_CAM, 0);
+ ctx->d_frame.fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_CAM, 0);
vfd = video_device_alloc();
if (!vfd) {
v4l2_err(v4l2_dev, "Failed to allocate video device\n");
- goto err_v4l2_reg;
+ goto err_vd_alloc;
}
- snprintf(vfd->name, sizeof(vfd->name), "%s:cap",
+ snprintf(vfd->name, sizeof(vfd->name), "%s.capture",
dev_name(&fimc->pdev->dev));
vfd->fops = &fimc_capture_fops;
vfd->ioctl_ops = &fimc_capture_ioctl_ops;
+ vfd->v4l2_dev = v4l2_dev;
vfd->minor = -1;
vfd->release = video_device_release;
vfd->lock = &fimc->lock;
@@ -849,8 +1438,6 @@
vid_cap->active_buf_cnt = 0;
vid_cap->reqbufs_count = 0;
vid_cap->refcnt = 0;
- /* Default color format for image sensor */
- vid_cap->fmt.code = V4L2_MBUS_FMT_YUYV8_2X8;
INIT_LIST_HEAD(&vid_cap->pending_buf_q);
INIT_LIST_HEAD(&vid_cap->active_buf_q);
@@ -868,34 +1455,37 @@
vb2_queue_init(q);
- ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
- if (ret) {
- v4l2_err(v4l2_dev, "Failed to register video device\n");
- goto err_vd_reg;
- }
+ fimc->vid_cap.vd_pad.flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_init(&vfd->entity, 1, &fimc->vid_cap.vd_pad, 0);
+ if (ret)
+ goto err_ent;
+ ret = fimc_create_capture_subdev(fimc, v4l2_dev);
+ if (ret)
+ goto err_sd_reg;
- v4l2_info(v4l2_dev,
- "FIMC capture driver registered as /dev/video%d\n",
- vfd->num);
-
+ vfd->ctrl_handler = &ctx->ctrl_handler;
return 0;
-err_vd_reg:
+err_sd_reg:
+ media_entity_cleanup(&vfd->entity);
+err_ent:
video_device_release(vfd);
-err_v4l2_reg:
- v4l2_device_unregister(v4l2_dev);
-err_info:
+err_vd_alloc:
kfree(ctx);
- dev_err(&fimc->pdev->dev, "failed to install\n");
return ret;
}
void fimc_unregister_capture_device(struct fimc_dev *fimc)
{
- struct fimc_vid_cap *capture = &fimc->vid_cap;
+ struct video_device *vfd = fimc->vid_cap.vfd;
- if (capture->vfd)
- video_unregister_device(capture->vfd);
-
- kfree(capture->ctx);
+ if (vfd) {
+ media_entity_cleanup(&vfd->entity);
+ /* Can also be called if video device was
+ not registered */
+ video_unregister_device(vfd);
+ }
+ fimc_destroy_capture_subdev(fimc);
+ kfree(fimc->vid_cap.ctx);
+ fimc->vid_cap.ctx = NULL;
}
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index aa55066..6c1c9cb 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -27,9 +28,10 @@
#include <media/videobuf2-dma-contig.h>
#include "fimc-core.h"
+#include "fimc-mdevice.h"
static char *fimc_clocks[MAX_FIMC_CLOCKS] = {
- "sclk_fimc", "fimc", "sclk_cam"
+ "sclk_fimc", "fimc"
};
static struct fimc_fmt fimc_formats[] = {
@@ -157,59 +159,28 @@
.memplanes = 2,
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
+ }, {
+ .name = "JPEG encoded data",
+ .fourcc = V4L2_PIX_FMT_JPEG,
+ .color = S5P_FIMC_JPEG,
+ .depth = { 8 },
+ .memplanes = 1,
+ .colplanes = 1,
+ .mbus_code = V4L2_MBUS_FMT_JPEG_1X8,
+ .flags = FMT_FLAGS_CAM,
},
};
-static struct v4l2_queryctrl fimc_ctrls[] = {
- {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Horizontal flip",
- .minimum = 0,
- .maximum = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Vertical flip",
- .minimum = 0,
- .maximum = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_ROTATE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Rotation (CCW)",
- .minimum = 0,
- .maximum = 270,
- .step = 90,
- .default_value = 0,
- },
-};
-
-
-static struct v4l2_queryctrl *get_ctrl(int id)
+int fimc_check_scaler_ratio(struct fimc_ctx *ctx, int sw, int sh,
+ int dw, int dh, int rotation)
{
- int i;
+ if (rotation == 90 || rotation == 270)
+ swap(dw, dh);
- for (i = 0; i < ARRAY_SIZE(fimc_ctrls); ++i)
- if (id == fimc_ctrls[i].id)
- return &fimc_ctrls[i];
- return NULL;
-}
+ if (!ctx->scaler.enabled)
+ return (sw == dw && sh == dh) ? 0 : -EINVAL;
-int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot)
-{
- int tx, ty;
-
- if (rot == 90 || rot == 270) {
- ty = dw;
- tx = dh;
- } else {
- tx = dw;
- ty = dh;
- }
-
- if ((sw >= SCALER_MAX_HRATIO * tx) || (sh >= SCALER_MAX_VRATIO * ty))
+ if ((sw >= SCALER_MAX_HRATIO * dw) || (sh >= SCALER_MAX_VRATIO * dh))
return -EINVAL;
return 0;
@@ -235,10 +206,11 @@
int fimc_set_scaler_info(struct fimc_ctx *ctx)
{
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+ struct device *dev = &ctx->fimc_dev->pdev->dev;
struct fimc_scaler *sc = &ctx->scaler;
struct fimc_frame *s_frame = &ctx->s_frame;
struct fimc_frame *d_frame = &ctx->d_frame;
- struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
int tx, ty, sx, sy;
int ret;
@@ -250,15 +222,14 @@
ty = d_frame->height;
}
if (tx <= 0 || ty <= 0) {
- v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
- "invalid target size: %d x %d", tx, ty);
+ dev_err(dev, "Invalid target size: %dx%d", tx, ty);
return -EINVAL;
}
sx = s_frame->width;
sy = s_frame->height;
if (sx <= 0 || sy <= 0) {
- err("invalid source size: %d x %d", sx, sy);
+ dev_err(dev, "Invalid source size: %dx%d", sx, sy);
return -EINVAL;
}
sc->real_width = sx;
@@ -301,7 +272,6 @@
static void fimc_m2m_job_finish(struct fimc_ctx *ctx, int vb_state)
{
struct vb2_buffer *src_vb, *dst_vb;
- struct fimc_dev *fimc = ctx->fimc_dev;
if (!ctx || !ctx->m2m_ctx)
return;
@@ -312,54 +282,68 @@
if (src_vb && dst_vb) {
v4l2_m2m_buf_done(src_vb, vb_state);
v4l2_m2m_buf_done(dst_vb, vb_state);
- v4l2_m2m_job_finish(fimc->m2m.m2m_dev, ctx->m2m_ctx);
+ v4l2_m2m_job_finish(ctx->fimc_dev->m2m.m2m_dev,
+ ctx->m2m_ctx);
}
}
/* Complete the transaction which has been scheduled for execution. */
-static void fimc_m2m_shutdown(struct fimc_ctx *ctx)
+static int fimc_m2m_shutdown(struct fimc_ctx *ctx)
{
struct fimc_dev *fimc = ctx->fimc_dev;
int ret;
if (!fimc_m2m_pending(fimc))
- return;
+ return 0;
fimc_ctx_state_lock_set(FIMC_CTX_SHUT, ctx);
ret = wait_event_timeout(fimc->irq_queue,
!fimc_ctx_state_is_set(FIMC_CTX_SHUT, ctx),
FIMC_SHUTDOWN_TIMEOUT);
- /*
- * In case of a timeout the buffers are not released in the interrupt
- * handler so return them here with the error flag set, if there are
- * any on the queue.
- */
- if (ret == 0)
- fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+
+ return ret == 0 ? -ETIMEDOUT : ret;
+}
+
+static int start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct fimc_ctx *ctx = q->drv_priv;
+ int ret;
+
+ ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
+ return ret > 0 ? 0 : ret;
}
static int stop_streaming(struct vb2_queue *q)
{
struct fimc_ctx *ctx = q->drv_priv;
+ int ret;
- fimc_m2m_shutdown(ctx);
+ ret = fimc_m2m_shutdown(ctx);
+ if (ret == -ETIMEDOUT)
+ fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+ pm_runtime_put(&ctx->fimc_dev->pdev->dev);
return 0;
}
-static void fimc_capture_irq_handler(struct fimc_dev *fimc)
+void fimc_capture_irq_handler(struct fimc_dev *fimc, bool final)
{
struct fimc_vid_cap *cap = &fimc->vid_cap;
struct fimc_vid_buffer *v_buf;
struct timeval *tv;
struct timespec ts;
+ if (test_and_clear_bit(ST_CAPT_SHUT, &fimc->state)) {
+ wake_up(&fimc->irq_queue);
+ return;
+ }
+
if (!list_empty(&cap->active_buf_q) &&
- test_bit(ST_CAPT_RUN, &fimc->state)) {
+ test_bit(ST_CAPT_RUN, &fimc->state) && final) {
ktime_get_real_ts(&ts);
- v_buf = active_queue_pop(cap);
+ v_buf = fimc_active_queue_pop(cap);
tv = &v_buf->vb.v4l2_buf.timestamp;
tv->tv_sec = ts.tv_sec;
@@ -369,19 +353,14 @@
vb2_buffer_done(&v_buf->vb, VB2_BUF_STATE_DONE);
}
- if (test_and_clear_bit(ST_CAPT_SHUT, &fimc->state)) {
- wake_up(&fimc->irq_queue);
- return;
- }
-
if (!list_empty(&cap->pending_buf_q)) {
- v_buf = pending_queue_pop(cap);
+ v_buf = fimc_pending_queue_pop(cap);
fimc_hw_set_output_addr(fimc, &v_buf->paddr, cap->buf_index);
v_buf->index = cap->buf_index;
/* Move the buffer to the capture active queue */
- active_queue_add(cap, v_buf);
+ fimc_active_queue_add(cap, v_buf);
dbg("next frame: %d, done frame: %d",
fimc_hw_get_frame_index(fimc), v_buf->index);
@@ -391,7 +370,8 @@
}
if (cap->active_buf_cnt == 0) {
- clear_bit(ST_CAPT_RUN, &fimc->state);
+ if (final)
+ clear_bit(ST_CAPT_RUN, &fimc->state);
if (++cap->buf_index >= FIMC_MAX_OUT_BUFS)
cap->buf_index = 0;
@@ -399,11 +379,13 @@
set_bit(ST_CAPT_RUN, &fimc->state);
}
+ fimc_capture_config_update(cap->ctx);
+
dbg("frame: %d, active_buf_cnt: %d",
fimc_hw_get_frame_index(fimc), cap->active_buf_cnt);
}
-static irqreturn_t fimc_isr(int irq, void *priv)
+static irqreturn_t fimc_irq_handler(int irq, void *priv)
{
struct fimc_dev *fimc = priv;
struct fimc_vid_cap *cap = &fimc->vid_cap;
@@ -411,9 +393,17 @@
fimc_hw_clear_irq(fimc);
+ spin_lock(&fimc->slock);
+
if (test_and_clear_bit(ST_M2M_PEND, &fimc->state)) {
+ if (test_and_clear_bit(ST_M2M_SUSPENDING, &fimc->state)) {
+ set_bit(ST_M2M_SUSPENDED, &fimc->state);
+ wake_up(&fimc->irq_queue);
+ goto out;
+ }
ctx = v4l2_m2m_get_curr_priv(fimc->m2m.m2m_dev);
if (ctx != NULL) {
+ spin_unlock(&fimc->slock);
fimc_m2m_job_finish(ctx, VB2_BUF_STATE_DONE);
spin_lock(&ctx->slock);
@@ -423,21 +413,16 @@
}
spin_unlock(&ctx->slock);
}
-
return IRQ_HANDLED;
- }
-
- spin_lock(&fimc->slock);
-
- if (test_bit(ST_CAPT_PEND, &fimc->state)) {
- fimc_capture_irq_handler(fimc);
-
+ } else if (test_bit(ST_CAPT_PEND, &fimc->state)) {
+ fimc_capture_irq_handler(fimc,
+ !test_bit(ST_CAPT_JPEG, &fimc->state));
if (cap->active_buf_cnt == 1) {
fimc_deactivate_capture(fimc);
clear_bit(ST_CAPT_STREAM, &fimc->state);
}
}
-
+out:
spin_unlock(&fimc->slock);
return IRQ_HANDLED;
}
@@ -457,7 +442,7 @@
dbg("memplanes= %d, colplanes= %d, pix_size= %d",
frame->fmt->memplanes, frame->fmt->colplanes, pix_size);
- paddr->y = vb2_dma_contig_plane_paddr(vb, 0);
+ paddr->y = vb2_dma_contig_plane_dma_addr(vb, 0);
if (frame->fmt->memplanes == 1) {
switch (frame->fmt->colplanes) {
@@ -485,10 +470,10 @@
}
} else {
if (frame->fmt->memplanes >= 2)
- paddr->cb = vb2_dma_contig_plane_paddr(vb, 1);
+ paddr->cb = vb2_dma_contig_plane_dma_addr(vb, 1);
if (frame->fmt->memplanes == 3)
- paddr->cr = vb2_dma_contig_plane_paddr(vb, 2);
+ paddr->cr = vb2_dma_contig_plane_dma_addr(vb, 2);
}
dbg("PHYS_ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d",
@@ -498,7 +483,7 @@
}
/* Set order for 1 and 2 plane YCBCR 4:2:2 formats. */
-static void fimc_set_yuv_order(struct fimc_ctx *ctx)
+void fimc_set_yuv_order(struct fimc_ctx *ctx)
{
/* The one only mode supported in SoC. */
ctx->in_order_2p = S5P_FIMC_LSB_CRCB;
@@ -540,7 +525,7 @@
dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
}
-static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f)
+void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f)
{
struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
u32 i, depth = 0;
@@ -606,9 +591,6 @@
fimc_set_yuv_order(ctx);
}
- /* Input DMA mode is not allowed when the scaler is disabled. */
- ctx->scaler.enabled = 1;
-
if (flags & FIMC_SRC_ADDR) {
vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
ret = fimc_prepare_addr(ctx, vb, s_frame, &s_frame->paddr);
@@ -635,10 +617,10 @@
return;
fimc = ctx->fimc_dev;
-
- spin_lock_irqsave(&ctx->slock, flags);
+ spin_lock_irqsave(&fimc->slock, flags);
set_bit(ST_M2M_PEND, &fimc->state);
+ spin_lock(&ctx->slock);
ctx->state |= (FIMC_SRC_ADDR | FIMC_DST_ADDR);
ret = fimc_prepare_config(ctx, ctx->state);
if (ret)
@@ -649,8 +631,6 @@
ctx->state |= FIMC_PARAMS;
fimc->m2m.ctx = ctx;
}
-
- spin_lock(&fimc->slock);
fimc_hw_set_input_addr(fimc, &ctx->s_frame.paddr);
if (ctx->state & FIMC_PARAMS) {
@@ -665,7 +645,7 @@
fimc_hw_set_mainscaler(ctx);
fimc_hw_set_target_format(ctx);
fimc_hw_set_rotation(ctx);
- fimc_hw_set_effect(ctx);
+ fimc_hw_set_effect(ctx, false);
}
fimc_hw_set_output_path(ctx);
@@ -680,10 +660,9 @@
ctx->state &= (FIMC_CTX_M2M | FIMC_CTX_CAP |
FIMC_SRC_FMT | FIMC_DST_FMT);
fimc_hw_activate_input_dma(fimc, true);
- spin_unlock(&fimc->slock);
-
dma_unlock:
- spin_unlock_irqrestore(&ctx->slock, flags);
+ spin_unlock(&ctx->slock);
+ spin_unlock_irqrestore(&fimc->slock, flags);
}
static void fimc_job_abort(void *priv)
@@ -692,7 +671,7 @@
}
static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
- unsigned int *num_planes, unsigned long sizes[],
+ unsigned int *num_planes, unsigned int sizes[],
void *allocators[])
{
struct fimc_ctx *ctx = vb2_get_drv_priv(vq);
@@ -762,167 +741,205 @@
.wait_prepare = fimc_unlock,
.wait_finish = fimc_lock,
.stop_streaming = stop_streaming,
+ .start_streaming = start_streaming,
};
-static int fimc_m2m_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
+/*
+ * V4L2 controls handling
+ */
+#define ctrl_to_ctx(__ctrl) \
+ container_of((__ctrl)->handler, struct fimc_ctx, ctrl_handler)
+
+static int fimc_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct fimc_ctx *ctx = file->private_data;
+ struct fimc_ctx *ctx = ctrl_to_ctx(ctrl);
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct samsung_fimc_variant *variant = fimc->variant;
+ unsigned long flags;
+ int ret = 0;
+
+ if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE)
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_HFLIP:
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->hflip = ctrl->val;
+ break;
+
+ case V4L2_CID_VFLIP:
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->vflip = ctrl->val;
+ break;
+
+ case V4L2_CID_ROTATE:
+ if (fimc_capture_pending(fimc) ||
+ fimc_ctx_state_is_set(FIMC_DST_FMT | FIMC_SRC_FMT, ctx)) {
+ ret = fimc_check_scaler_ratio(ctx, ctx->s_frame.width,
+ ctx->s_frame.height, ctx->d_frame.width,
+ ctx->d_frame.height, ctrl->val);
+ }
+ if (ret) {
+ v4l2_err(fimc->m2m.vfd, "Out of scaler range\n");
+ return -EINVAL;
+ }
+ if ((ctrl->val == 90 || ctrl->val == 270) &&
+ !variant->has_out_rot)
+ return -EINVAL;
+ spin_lock_irqsave(&ctx->slock, flags);
+ ctx->rotation = ctrl->val;
+ break;
+
+ default:
+ v4l2_err(fimc->v4l2_dev, "Invalid control: 0x%X\n", ctrl->id);
+ return -EINVAL;
+ }
+ ctx->state |= FIMC_PARAMS;
+ set_bit(ST_CAPT_APPLY_CFG, &fimc->state);
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops fimc_ctrl_ops = {
+ .s_ctrl = fimc_s_ctrl,
+};
+
+int fimc_ctrls_create(struct fimc_ctx *ctx)
+{
+ if (ctx->ctrls_rdy)
+ return 0;
+ v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3);
+
+ ctx->ctrl_rotate = v4l2_ctrl_new_std(&ctx->ctrl_handler, &fimc_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ ctx->ctrl_hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, &fimc_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ ctx->ctrl_vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, &fimc_ctrl_ops,
+ V4L2_CID_ROTATE, 0, 270, 90, 0);
+ ctx->ctrls_rdy = ctx->ctrl_handler.error == 0;
+
+ return ctx->ctrl_handler.error;
+}
+
+void fimc_ctrls_delete(struct fimc_ctx *ctx)
+{
+ if (ctx->ctrls_rdy) {
+ v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+ ctx->ctrls_rdy = false;
+ }
+}
+
+void fimc_ctrls_activate(struct fimc_ctx *ctx, bool active)
+{
+ if (!ctx->ctrls_rdy)
+ return;
+
+ mutex_lock(&ctx->ctrl_handler.lock);
+ v4l2_ctrl_activate(ctx->ctrl_rotate, active);
+ v4l2_ctrl_activate(ctx->ctrl_hflip, active);
+ v4l2_ctrl_activate(ctx->ctrl_vflip, active);
+
+ if (active) {
+ ctx->rotation = ctx->ctrl_rotate->val;
+ ctx->hflip = ctx->ctrl_hflip->val;
+ ctx->vflip = ctx->ctrl_vflip->val;
+ } else {
+ ctx->rotation = 0;
+ ctx->hflip = 0;
+ ctx->vflip = 0;
+ }
+ mutex_unlock(&ctx->ctrl_handler.lock);
+}
+
+/*
+ * V4L2 ioctl handlers
+ */
+static int fimc_m2m_querycap(struct file *file, void *fh,
+ struct v4l2_capability *cap)
+{
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
struct fimc_dev *fimc = ctx->fimc_dev;
strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
cap->bus_info[0] = 0;
cap->capabilities = V4L2_CAP_STREAMING |
- V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT |
V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE;
return 0;
}
-int fimc_vidioc_enum_fmt_mplane(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
+static int fimc_m2m_enum_fmt_mplane(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
{
struct fimc_fmt *fmt;
- if (f->index >= ARRAY_SIZE(fimc_formats))
+ fmt = fimc_find_format(NULL, NULL, FMT_FLAGS_M2M, f->index);
+ if (!fmt)
return -EINVAL;
- fmt = &fimc_formats[f->index];
strncpy(f->description, fmt->name, sizeof(f->description) - 1);
f->pixelformat = fmt->fourcc;
-
return 0;
}
-int fimc_vidioc_g_fmt_mplane(struct file *file, void *priv,
- struct v4l2_format *f)
+int fimc_fill_format(struct fimc_frame *frame, struct v4l2_format *f)
{
- struct fimc_ctx *ctx = priv;
- struct fimc_frame *frame;
- struct v4l2_pix_format_mplane *pixm;
+ struct v4l2_pix_format_mplane *pixm = &f->fmt.pix_mp;
int i;
- frame = ctx_get_frame(ctx, f->type);
- if (IS_ERR(frame))
- return PTR_ERR(frame);
-
- pixm = &f->fmt.pix_mp;
-
- pixm->width = frame->width;
- pixm->height = frame->height;
- pixm->field = V4L2_FIELD_NONE;
- pixm->pixelformat = frame->fmt->fourcc;
- pixm->colorspace = V4L2_COLORSPACE_JPEG;
- pixm->num_planes = frame->fmt->memplanes;
+ pixm->width = frame->o_width;
+ pixm->height = frame->o_height;
+ pixm->field = V4L2_FIELD_NONE;
+ pixm->pixelformat = frame->fmt->fourcc;
+ pixm->colorspace = V4L2_COLORSPACE_JPEG;
+ pixm->num_planes = frame->fmt->memplanes;
for (i = 0; i < pixm->num_planes; ++i) {
- int bpl = frame->o_width;
-
+ int bpl = frame->f_width;
if (frame->fmt->colplanes == 1) /* packed formats */
bpl = (bpl * frame->fmt->depth[0]) / 8;
-
pixm->plane_fmt[i].bytesperline = bpl;
-
pixm->plane_fmt[i].sizeimage = (frame->o_width *
frame->o_height * frame->fmt->depth[i]) / 8;
}
-
return 0;
}
-struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask)
+void fimc_fill_frame(struct fimc_frame *frame, struct v4l2_format *f)
{
- struct fimc_fmt *fmt;
- unsigned int i;
+ struct v4l2_pix_format_mplane *pixm = &f->fmt.pix_mp;
- for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
- fmt = &fimc_formats[i];
- if (fmt->fourcc == f->fmt.pix_mp.pixelformat &&
- (fmt->flags & mask))
- break;
- }
-
- return (i == ARRAY_SIZE(fimc_formats)) ? NULL : fmt;
+ frame->f_width = pixm->plane_fmt[0].bytesperline;
+ if (frame->fmt->colplanes == 1)
+ frame->f_width = (frame->f_width * 8) / frame->fmt->depth[0];
+ frame->f_height = pixm->height;
+ frame->width = pixm->width;
+ frame->height = pixm->height;
+ frame->o_width = pixm->width;
+ frame->o_height = pixm->height;
+ frame->offs_h = 0;
+ frame->offs_v = 0;
}
-struct fimc_fmt *find_mbus_format(struct v4l2_mbus_framefmt *f,
- unsigned int mask)
+/**
+ * fimc_adjust_mplane_format - adjust bytesperline/sizeimage for each plane
+ * @fmt: fimc pixel format description (input)
+ * @width: requested pixel width
+ * @height: requested pixel height
+ * @pix: multi-plane format to adjust
+ */
+void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height,
+ struct v4l2_pix_format_mplane *pix)
{
- struct fimc_fmt *fmt;
- unsigned int i;
+ u32 bytesperline = 0;
+ int i;
- for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
- fmt = &fimc_formats[i];
- if (fmt->mbus_code == f->code && (fmt->flags & mask))
- break;
- }
-
- return (i == ARRAY_SIZE(fimc_formats)) ? NULL : fmt;
-}
-
-
-int fimc_vidioc_try_fmt_mplane(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct fimc_ctx *ctx = priv;
- struct fimc_dev *fimc = ctx->fimc_dev;
- struct samsung_fimc_variant *variant = fimc->variant;
- struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
- struct fimc_fmt *fmt;
- u32 max_width, mod_x, mod_y, mask;
- int i, is_output = 0;
-
-
- if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
- if (fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx))
- return -EINVAL;
- is_output = 1;
- } else if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
- return -EINVAL;
- }
-
- dbg("w: %d, h: %d", pix->width, pix->height);
-
- mask = is_output ? FMT_FLAGS_M2M : FMT_FLAGS_M2M | FMT_FLAGS_CAM;
- fmt = find_format(f, mask);
- if (!fmt) {
- v4l2_err(&fimc->m2m.v4l2_dev, "Fourcc format (0x%X) invalid.\n",
- pix->pixelformat);
- return -EINVAL;
- }
-
- if (pix->field == V4L2_FIELD_ANY)
- pix->field = V4L2_FIELD_NONE;
- else if (V4L2_FIELD_NONE != pix->field)
- return -EINVAL;
-
- if (is_output) {
- max_width = variant->pix_limit->scaler_dis_w;
- mod_x = ffs(variant->min_inp_pixsize) - 1;
- } else {
- max_width = variant->pix_limit->out_rot_dis_w;
- mod_x = ffs(variant->min_out_pixsize) - 1;
- }
-
- if (tiled_fmt(fmt)) {
- mod_x = 6; /* 64 x 32 pixels tile */
- mod_y = 5;
- } else {
- if (fimc->id == 1 && variant->pix_hoff)
- mod_y = fimc_fmt_is_rgb(fmt->color) ? 0 : 1;
- else
- mod_y = mod_x;
- }
-
- dbg("mod_x: %d, mod_y: %d, max_w: %d", mod_x, mod_y, max_width);
-
- v4l_bound_align_image(&pix->width, 16, max_width, mod_x,
- &pix->height, 8, variant->pix_limit->scaler_dis_w, mod_y, 0);
-
- pix->num_planes = fmt->memplanes;
pix->colorspace = V4L2_COLORSPACE_JPEG;
-
+ pix->field = V4L2_FIELD_NONE;
+ pix->num_planes = fmt->memplanes;
+ pix->height = height;
+ pix->width = width;
for (i = 0; i < pix->num_planes; ++i) {
u32 bpl = pix->plane_fmt[i].bytesperline;
@@ -936,48 +953,142 @@
bpl = (pix->width * fmt->depth[0]) / 8;
if (i == 0) /* Same bytesperline for each plane. */
- mod_x = bpl;
+ bytesperline = bpl;
- pix->plane_fmt[i].bytesperline = mod_x;
+ pix->plane_fmt[i].bytesperline = bytesperline;
*sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8;
}
+}
+static int fimc_m2m_g_fmt_mplane(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
+ struct fimc_frame *frame = ctx_get_frame(ctx, f->type);
+
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
+
+ return fimc_fill_format(frame, f);
+}
+
+/**
+ * fimc_find_format - lookup fimc color format by fourcc or media bus format
+ * @pixelformat: fourcc to match, ignored if null
+ * @mbus_code: media bus code to match, ignored if null
+ * @mask: the color flags to match
+ * @index: offset in the fimc_formats array, ignored if negative
+ */
+struct fimc_fmt *fimc_find_format(u32 *pixelformat, u32 *mbus_code,
+ unsigned int mask, int index)
+{
+ struct fimc_fmt *fmt, *def_fmt = NULL;
+ unsigned int i;
+ int id = 0;
+
+ if (index >= ARRAY_SIZE(fimc_formats))
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
+ fmt = &fimc_formats[i];
+ if (!(fmt->flags & mask))
+ continue;
+ if (pixelformat && fmt->fourcc == *pixelformat)
+ return fmt;
+ if (mbus_code && fmt->mbus_code == *mbus_code)
+ return fmt;
+ if (index == id)
+ def_fmt = fmt;
+ id++;
+ }
+ return def_fmt;
+}
+
+static int fimc_try_fmt_mplane(struct fimc_ctx *ctx, struct v4l2_format *f)
+{
+ struct fimc_dev *fimc = ctx->fimc_dev;
+ struct samsung_fimc_variant *variant = fimc->variant;
+ struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+ struct fimc_fmt *fmt;
+ u32 max_w, mod_x, mod_y;
+
+ if (!IS_M2M(f->type))
+ return -EINVAL;
+
+ dbg("w: %d, h: %d", pix->width, pix->height);
+
+ fmt = fimc_find_format(&pix->pixelformat, NULL, FMT_FLAGS_M2M, 0);
+ if (WARN(fmt == NULL, "Pixel format lookup failed"))
+ return -EINVAL;
+
+ if (pix->field == V4L2_FIELD_ANY)
+ pix->field = V4L2_FIELD_NONE;
+ else if (pix->field != V4L2_FIELD_NONE)
+ return -EINVAL;
+
+ if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ max_w = variant->pix_limit->scaler_dis_w;
+ mod_x = ffs(variant->min_inp_pixsize) - 1;
+ } else {
+ max_w = variant->pix_limit->out_rot_dis_w;
+ mod_x = ffs(variant->min_out_pixsize) - 1;
+ }
+
+ if (tiled_fmt(fmt)) {
+ mod_x = 6; /* 64 x 32 pixels tile */
+ mod_y = 5;
+ } else {
+ if (fimc->id == 1 && variant->pix_hoff)
+ mod_y = fimc_fmt_is_rgb(fmt->color) ? 0 : 1;
+ else
+ mod_y = mod_x;
+ }
+ dbg("mod_x: %d, mod_y: %d, max_w: %d", mod_x, mod_y, max_w);
+
+ v4l_bound_align_image(&pix->width, 16, max_w, mod_x,
+ &pix->height, 8, variant->pix_limit->scaler_dis_w, mod_y, 0);
+
+ fimc_adjust_mplane_format(fmt, pix->width, pix->height, &f->fmt.pix_mp);
return 0;
}
-static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv,
+static int fimc_m2m_try_fmt_mplane(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
+
+ return fimc_try_fmt_mplane(ctx, f);
+}
+
+static int fimc_m2m_s_fmt_mplane(struct file *file, void *fh,
struct v4l2_format *f)
{
- struct fimc_ctx *ctx = priv;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
struct fimc_dev *fimc = ctx->fimc_dev;
struct vb2_queue *vq;
struct fimc_frame *frame;
struct v4l2_pix_format_mplane *pix;
int i, ret = 0;
- ret = fimc_vidioc_try_fmt_mplane(file, priv, f);
+ ret = fimc_try_fmt_mplane(ctx, f);
if (ret)
return ret;
vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
if (vb2_is_busy(vq)) {
- v4l2_err(&fimc->m2m.v4l2_dev, "queue (%d) busy\n", f->type);
+ v4l2_err(fimc->m2m.vfd, "queue (%d) busy\n", f->type);
return -EBUSY;
}
- if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
frame = &ctx->s_frame;
- } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+ else
frame = &ctx->d_frame;
- } else {
- v4l2_err(&fimc->m2m.v4l2_dev,
- "Wrong buffer/video queue type (%d)\n", f->type);
- return -EINVAL;
- }
pix = &f->fmt.pix_mp;
- frame->fmt = find_format(f, FMT_FLAGS_M2M);
+ frame->fmt = fimc_find_format(&pix->pixelformat, NULL,
+ FMT_FLAGS_M2M, 0);
if (!frame->fmt)
return -EINVAL;
@@ -986,15 +1097,9 @@
(pix->width * pix->height * frame->fmt->depth[i]) / 8;
}
- frame->f_width = pix->plane_fmt[0].bytesperline * 8 /
- frame->fmt->depth[0];
- frame->f_height = pix->height;
- frame->width = pix->width;
- frame->height = pix->height;
- frame->o_width = pix->width;
- frame->o_height = pix->height;
- frame->offs_h = 0;
- frame->offs_v = 0;
+ fimc_fill_frame(frame, f);
+
+ ctx->scaler.enabled = 1;
if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
fimc_ctx_state_lock_set(FIMC_PARAMS | FIMC_DST_FMT, ctx);
@@ -1006,39 +1111,42 @@
return 0;
}
-static int fimc_m2m_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *reqbufs)
+static int fimc_m2m_reqbufs(struct file *file, void *fh,
+ struct v4l2_requestbuffers *reqbufs)
{
- struct fimc_ctx *ctx = priv;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
+
return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
}
-static int fimc_m2m_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *buf)
+static int fimc_m2m_querybuf(struct file *file, void *fh,
+ struct v4l2_buffer *buf)
{
- struct fimc_ctx *ctx = priv;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
+
return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
}
-static int fimc_m2m_qbuf(struct file *file, void *priv,
- struct v4l2_buffer *buf)
+static int fimc_m2m_qbuf(struct file *file, void *fh,
+ struct v4l2_buffer *buf)
{
- struct fimc_ctx *ctx = priv;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
}
-static int fimc_m2m_dqbuf(struct file *file, void *priv,
- struct v4l2_buffer *buf)
+static int fimc_m2m_dqbuf(struct file *file, void *fh,
+ struct v4l2_buffer *buf)
{
- struct fimc_ctx *ctx = priv;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
+
return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
}
-static int fimc_m2m_streamon(struct file *file, void *priv,
- enum v4l2_buf_type type)
+static int fimc_m2m_streamon(struct file *file, void *fh,
+ enum v4l2_buf_type type)
{
- struct fimc_ctx *ctx = priv;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
/* The source and target color format need to be set */
if (V4L2_TYPE_IS_OUTPUT(type)) {
@@ -1051,149 +1159,19 @@
return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
}
-static int fimc_m2m_streamoff(struct file *file, void *priv,
+static int fimc_m2m_streamoff(struct file *file, void *fh,
enum v4l2_buf_type type)
{
- struct fimc_ctx *ctx = priv;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
+
return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
}
-int fimc_vidioc_queryctrl(struct file *file, void *priv,
- struct v4l2_queryctrl *qc)
-{
- struct fimc_ctx *ctx = priv;
- struct v4l2_queryctrl *c;
- int ret = -EINVAL;
-
- c = get_ctrl(qc->id);
- if (c) {
- *qc = *c;
- return 0;
- }
-
- if (fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx)) {
- return v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd,
- core, queryctrl, qc);
- }
- return ret;
-}
-
-int fimc_vidioc_g_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
-{
- struct fimc_ctx *ctx = priv;
- struct fimc_dev *fimc = ctx->fimc_dev;
-
- switch (ctrl->id) {
- case V4L2_CID_HFLIP:
- ctrl->value = (FLIP_X_AXIS & ctx->flip) ? 1 : 0;
- break;
- case V4L2_CID_VFLIP:
- ctrl->value = (FLIP_Y_AXIS & ctx->flip) ? 1 : 0;
- break;
- case V4L2_CID_ROTATE:
- ctrl->value = ctx->rotation;
- break;
- default:
- if (fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx)) {
- return v4l2_subdev_call(fimc->vid_cap.sd, core,
- g_ctrl, ctrl);
- } else {
- v4l2_err(&fimc->m2m.v4l2_dev, "Invalid control\n");
- return -EINVAL;
- }
- }
- dbg("ctrl->value= %d", ctrl->value);
-
- return 0;
-}
-
-int check_ctrl_val(struct fimc_ctx *ctx, struct v4l2_control *ctrl)
-{
- struct v4l2_queryctrl *c;
- c = get_ctrl(ctrl->id);
- if (!c)
- return -EINVAL;
-
- if (ctrl->value < c->minimum || ctrl->value > c->maximum
- || (c->step != 0 && ctrl->value % c->step != 0)) {
- v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
- "Invalid control value\n");
- return -ERANGE;
- }
-
- return 0;
-}
-
-int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl)
-{
- struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
- struct fimc_dev *fimc = ctx->fimc_dev;
- int ret = 0;
-
- switch (ctrl->id) {
- case V4L2_CID_HFLIP:
- if (ctrl->value)
- ctx->flip |= FLIP_X_AXIS;
- else
- ctx->flip &= ~FLIP_X_AXIS;
- break;
-
- case V4L2_CID_VFLIP:
- if (ctrl->value)
- ctx->flip |= FLIP_Y_AXIS;
- else
- ctx->flip &= ~FLIP_Y_AXIS;
- break;
-
- case V4L2_CID_ROTATE:
- if (fimc_ctx_state_is_set(FIMC_DST_FMT | FIMC_SRC_FMT, ctx)) {
- ret = fimc_check_scaler_ratio(ctx->s_frame.width,
- ctx->s_frame.height, ctx->d_frame.width,
- ctx->d_frame.height, ctrl->value);
- }
-
- if (ret) {
- v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range\n");
- return -EINVAL;
- }
-
- /* Check for the output rotator availability */
- if ((ctrl->value == 90 || ctrl->value == 270) &&
- (ctx->in_path == FIMC_DMA && !variant->has_out_rot))
- return -EINVAL;
- ctx->rotation = ctrl->value;
- break;
-
- default:
- v4l2_err(&fimc->m2m.v4l2_dev, "Invalid control\n");
- return -EINVAL;
- }
-
- fimc_ctx_state_lock_set(FIMC_PARAMS, ctx);
-
- return 0;
-}
-
-static int fimc_m2m_s_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
-{
- struct fimc_ctx *ctx = priv;
- int ret = 0;
-
- ret = check_ctrl_val(ctx, ctrl);
- if (ret)
- return ret;
-
- ret = fimc_s_ctrl(ctx, ctrl);
- return 0;
-}
-
static int fimc_m2m_cropcap(struct file *file, void *fh,
- struct v4l2_cropcap *cr)
+ struct v4l2_cropcap *cr)
{
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
struct fimc_frame *frame;
- struct fimc_ctx *ctx = fh;
frame = ctx_get_frame(ctx, cr->type);
if (IS_ERR(frame))
@@ -1201,8 +1179,8 @@
cr->bounds.left = 0;
cr->bounds.top = 0;
- cr->bounds.width = frame->f_width;
- cr->bounds.height = frame->f_height;
+ cr->bounds.width = frame->o_width;
+ cr->bounds.height = frame->o_height;
cr->defrect = cr->bounds;
return 0;
@@ -1210,8 +1188,8 @@
static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
{
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
struct fimc_frame *frame;
- struct fimc_ctx *ctx = file->private_data;
frame = ctx_get_frame(ctx, cr->type);
if (IS_ERR(frame))
@@ -1225,26 +1203,21 @@
return 0;
}
-int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr)
+static int fimc_m2m_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr)
{
struct fimc_dev *fimc = ctx->fimc_dev;
struct fimc_frame *f;
u32 min_size, halign, depth = 0;
- bool is_capture_ctx;
int i;
if (cr->c.top < 0 || cr->c.left < 0) {
- v4l2_err(&fimc->m2m.v4l2_dev,
+ v4l2_err(fimc->m2m.vfd,
"doesn't support negative values for top & left\n");
return -EINVAL;
}
-
- is_capture_ctx = fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx);
-
if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- f = is_capture_ctx ? &ctx->s_frame : &ctx->d_frame;
- else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE &&
- !is_capture_ctx)
+ f = &ctx->d_frame;
+ else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
f = &ctx->s_frame;
else
return -EINVAL;
@@ -1253,15 +1226,10 @@
fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize;
/* Get pixel alignment constraints. */
- if (is_capture_ctx) {
- min_size = 16;
- halign = 4;
- } else {
- if (fimc->id == 1 && fimc->variant->pix_hoff)
- halign = fimc_fmt_is_rgb(f->fmt->color) ? 0 : 1;
- else
- halign = ffs(min_size) - 1;
- }
+ if (fimc->id == 1 && fimc->variant->pix_hoff)
+ halign = fimc_fmt_is_rgb(f->fmt->color) ? 0 : 1;
+ else
+ halign = ffs(min_size) - 1;
for (i = 0; i < f->fmt->colplanes; i++)
depth += f->fmt->depth[i];
@@ -1278,7 +1246,7 @@
cr->c.top = f->o_height - cr->c.height;
cr->c.left = round_down(cr->c.left, min_size);
- cr->c.top = round_down(cr->c.top, is_capture_ctx ? 16 : 8);
+ cr->c.top = round_down(cr->c.top, fimc->variant->hor_offs_align);
dbg("l:%d, t:%d, w:%d, h:%d, f_w: %d, f_h: %d",
cr->c.left, cr->c.top, cr->c.width, cr->c.height,
@@ -1289,12 +1257,12 @@
static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
{
- struct fimc_ctx *ctx = file->private_data;
+ struct fimc_ctx *ctx = fh_to_ctx(fh);
struct fimc_dev *fimc = ctx->fimc_dev;
struct fimc_frame *f;
int ret;
- ret = fimc_try_crop(ctx, cr);
+ ret = fimc_m2m_try_crop(ctx, cr);
if (ret)
return ret;
@@ -1304,18 +1272,16 @@
/* Check to see if scaling ratio is within supported range */
if (fimc_ctx_state_is_set(FIMC_DST_FMT | FIMC_SRC_FMT, ctx)) {
if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
- ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height,
- ctx->d_frame.width,
- ctx->d_frame.height,
- ctx->rotation);
+ ret = fimc_check_scaler_ratio(ctx, cr->c.width,
+ cr->c.height, ctx->d_frame.width,
+ ctx->d_frame.height, ctx->rotation);
} else {
- ret = fimc_check_scaler_ratio(ctx->s_frame.width,
- ctx->s_frame.height,
- cr->c.width, cr->c.height,
- ctx->rotation);
+ ret = fimc_check_scaler_ratio(ctx, ctx->s_frame.width,
+ ctx->s_frame.height, cr->c.width,
+ cr->c.height, ctx->rotation);
}
if (ret) {
- v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range\n");
+ v4l2_err(fimc->m2m.vfd, "Out of scaler range\n");
return -EINVAL;
}
}
@@ -1333,14 +1299,14 @@
static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = {
.vidioc_querycap = fimc_m2m_querycap,
- .vidioc_enum_fmt_vid_cap_mplane = fimc_vidioc_enum_fmt_mplane,
- .vidioc_enum_fmt_vid_out_mplane = fimc_vidioc_enum_fmt_mplane,
+ .vidioc_enum_fmt_vid_cap_mplane = fimc_m2m_enum_fmt_mplane,
+ .vidioc_enum_fmt_vid_out_mplane = fimc_m2m_enum_fmt_mplane,
- .vidioc_g_fmt_vid_cap_mplane = fimc_vidioc_g_fmt_mplane,
- .vidioc_g_fmt_vid_out_mplane = fimc_vidioc_g_fmt_mplane,
+ .vidioc_g_fmt_vid_cap_mplane = fimc_m2m_g_fmt_mplane,
+ .vidioc_g_fmt_vid_out_mplane = fimc_m2m_g_fmt_mplane,
- .vidioc_try_fmt_vid_cap_mplane = fimc_vidioc_try_fmt_mplane,
- .vidioc_try_fmt_vid_out_mplane = fimc_vidioc_try_fmt_mplane,
+ .vidioc_try_fmt_vid_cap_mplane = fimc_m2m_try_fmt_mplane,
+ .vidioc_try_fmt_vid_out_mplane = fimc_m2m_try_fmt_mplane,
.vidioc_s_fmt_vid_cap_mplane = fimc_m2m_s_fmt_mplane,
.vidioc_s_fmt_vid_out_mplane = fimc_m2m_s_fmt_mplane,
@@ -1354,10 +1320,6 @@
.vidioc_streamon = fimc_m2m_streamon,
.vidioc_streamoff = fimc_m2m_streamoff,
- .vidioc_queryctrl = fimc_vidioc_queryctrl,
- .vidioc_g_ctrl = fimc_vidioc_g_ctrl,
- .vidioc_s_ctrl = fimc_m2m_s_ctrl,
-
.vidioc_g_crop = fimc_m2m_g_crop,
.vidioc_s_crop = fimc_m2m_s_crop,
.vidioc_cropcap = fimc_m2m_cropcap
@@ -1396,7 +1358,8 @@
static int fimc_m2m_open(struct file *file)
{
struct fimc_dev *fimc = video_drvdata(file);
- struct fimc_ctx *ctx = NULL;
+ struct fimc_ctx *ctx;
+ int ret;
dbg("pid: %d, state: 0x%lx, refcnt: %d",
task_pid_nr(current), fimc->state, fimc->vid_cap.refcnt);
@@ -1408,19 +1371,24 @@
if (fimc->vid_cap.refcnt > 0)
return -EBUSY;
- fimc->m2m.refcnt++;
- set_bit(ST_OUTDMA_RUN, &fimc->state);
-
ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
if (!ctx)
return -ENOMEM;
+ v4l2_fh_init(&ctx->fh, fimc->m2m.vfd);
+ ret = fimc_ctrls_create(ctx);
+ if (ret)
+ goto error_fh;
- file->private_data = ctx;
+ /* Use separate control handler per file handle */
+ ctx->fh.ctrl_handler = &ctx->ctrl_handler;
+ file->private_data = &ctx->fh;
+ v4l2_fh_add(&ctx->fh);
+
ctx->fimc_dev = fimc;
/* Default color format */
ctx->s_frame.fmt = &fimc_formats[0];
ctx->d_frame.fmt = &fimc_formats[0];
- /* Setup the device context for mem2mem mode. */
+ /* Setup the device context for memory-to-memory mode */
ctx->state = FIMC_CTX_M2M;
ctx->flags = 0;
ctx->in_path = FIMC_DMA;
@@ -1429,34 +1397,46 @@
ctx->m2m_ctx = v4l2_m2m_ctx_init(fimc->m2m.m2m_dev, ctx, queue_init);
if (IS_ERR(ctx->m2m_ctx)) {
- int err = PTR_ERR(ctx->m2m_ctx);
- kfree(ctx);
- return err;
+ ret = PTR_ERR(ctx->m2m_ctx);
+ goto error_c;
}
+ if (fimc->m2m.refcnt++ == 0)
+ set_bit(ST_M2M_RUN, &fimc->state);
return 0;
+
+error_c:
+ fimc_ctrls_delete(ctx);
+error_fh:
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ kfree(ctx);
+ return ret;
}
static int fimc_m2m_release(struct file *file)
{
- struct fimc_ctx *ctx = file->private_data;
+ struct fimc_ctx *ctx = fh_to_ctx(file->private_data);
struct fimc_dev *fimc = ctx->fimc_dev;
dbg("pid: %d, state: 0x%lx, refcnt= %d",
task_pid_nr(current), fimc->state, fimc->m2m.refcnt);
v4l2_m2m_ctx_release(ctx->m2m_ctx);
- kfree(ctx);
- if (--fimc->m2m.refcnt <= 0)
- clear_bit(ST_OUTDMA_RUN, &fimc->state);
+ fimc_ctrls_delete(ctx);
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ if (--fimc->m2m.refcnt <= 0)
+ clear_bit(ST_M2M_RUN, &fimc->state);
+ kfree(ctx);
return 0;
}
static unsigned int fimc_m2m_poll(struct file *file,
- struct poll_table_struct *wait)
+ struct poll_table_struct *wait)
{
- struct fimc_ctx *ctx = file->private_data;
+ struct fimc_ctx *ctx = fh_to_ctx(file->private_data);
return v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
}
@@ -1464,7 +1444,7 @@
static int fimc_m2m_mmap(struct file *file, struct vm_area_struct *vma)
{
- struct fimc_ctx *ctx = file->private_data;
+ struct fimc_ctx *ctx = fh_to_ctx(file->private_data);
return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
}
@@ -1483,92 +1463,73 @@
.job_abort = fimc_job_abort,
};
-static int fimc_register_m2m_device(struct fimc_dev *fimc)
+int fimc_register_m2m_device(struct fimc_dev *fimc,
+ struct v4l2_device *v4l2_dev)
{
struct video_device *vfd;
struct platform_device *pdev;
- struct v4l2_device *v4l2_dev;
int ret = 0;
if (!fimc)
return -ENODEV;
pdev = fimc->pdev;
- v4l2_dev = &fimc->m2m.v4l2_dev;
-
- /* set name if it is empty */
- if (!v4l2_dev->name[0])
- snprintf(v4l2_dev->name, sizeof(v4l2_dev->name),
- "%s.m2m", dev_name(&pdev->dev));
-
- ret = v4l2_device_register(&pdev->dev, v4l2_dev);
- if (ret)
- goto err_m2m_r1;
+ fimc->v4l2_dev = v4l2_dev;
vfd = video_device_alloc();
if (!vfd) {
v4l2_err(v4l2_dev, "Failed to allocate video device\n");
- goto err_m2m_r1;
+ return -ENOMEM;
}
vfd->fops = &fimc_m2m_fops;
vfd->ioctl_ops = &fimc_m2m_ioctl_ops;
+ vfd->v4l2_dev = v4l2_dev;
vfd->minor = -1;
vfd->release = video_device_release;
vfd->lock = &fimc->lock;
- snprintf(vfd->name, sizeof(vfd->name), "%s:m2m", dev_name(&pdev->dev));
-
+ snprintf(vfd->name, sizeof(vfd->name), "%s.m2m", dev_name(&pdev->dev));
video_set_drvdata(vfd, fimc);
- platform_set_drvdata(pdev, fimc);
fimc->m2m.vfd = vfd;
fimc->m2m.m2m_dev = v4l2_m2m_init(&m2m_ops);
if (IS_ERR(fimc->m2m.m2m_dev)) {
v4l2_err(v4l2_dev, "failed to initialize v4l2-m2m device\n");
ret = PTR_ERR(fimc->m2m.m2m_dev);
- goto err_m2m_r2;
+ goto err_init;
}
- ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
- if (ret) {
- v4l2_err(v4l2_dev,
- "%s(): failed to register video device\n", __func__);
- goto err_m2m_r3;
- }
- v4l2_info(v4l2_dev,
- "FIMC m2m driver registered as /dev/video%d\n", vfd->num);
+ ret = media_entity_init(&vfd->entity, 0, NULL, 0);
+ if (!ret)
+ return 0;
- return 0;
-
-err_m2m_r3:
v4l2_m2m_release(fimc->m2m.m2m_dev);
-err_m2m_r2:
+err_init:
video_device_release(fimc->m2m.vfd);
-err_m2m_r1:
- v4l2_device_unregister(v4l2_dev);
-
return ret;
}
-static void fimc_unregister_m2m_device(struct fimc_dev *fimc)
+void fimc_unregister_m2m_device(struct fimc_dev *fimc)
{
- if (fimc) {
- v4l2_m2m_release(fimc->m2m.m2m_dev);
- video_unregister_device(fimc->m2m.vfd);
+ if (!fimc)
+ return;
- v4l2_device_unregister(&fimc->m2m.v4l2_dev);
+ if (fimc->m2m.m2m_dev)
+ v4l2_m2m_release(fimc->m2m.m2m_dev);
+ if (fimc->m2m.vfd) {
+ media_entity_cleanup(&fimc->m2m.vfd->entity);
+ /* Can also be called if video device wasn't registered */
+ video_unregister_device(fimc->m2m.vfd);
}
}
-static void fimc_clk_release(struct fimc_dev *fimc)
+static void fimc_clk_put(struct fimc_dev *fimc)
{
int i;
for (i = 0; i < fimc->num_clocks; i++) {
- if (fimc->clock[i]) {
- clk_disable(fimc->clock[i]);
+ if (fimc->clock[i])
clk_put(fimc->clock[i]);
- }
}
}
@@ -1577,15 +1538,50 @@
int i;
for (i = 0; i < fimc->num_clocks; i++) {
fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clocks[i]);
-
- if (!IS_ERR_OR_NULL(fimc->clock[i])) {
- clk_enable(fimc->clock[i]);
+ if (!IS_ERR_OR_NULL(fimc->clock[i]))
continue;
- }
dev_err(&fimc->pdev->dev, "failed to get fimc clock: %s\n",
fimc_clocks[i]);
return -ENXIO;
}
+
+ return 0;
+}
+
+static int fimc_m2m_suspend(struct fimc_dev *fimc)
+{
+ unsigned long flags;
+ int timeout;
+
+ spin_lock_irqsave(&fimc->slock, flags);
+ if (!fimc_m2m_pending(fimc)) {
+ spin_unlock_irqrestore(&fimc->slock, flags);
+ return 0;
+ }
+ clear_bit(ST_M2M_SUSPENDED, &fimc->state);
+ set_bit(ST_M2M_SUSPENDING, &fimc->state);
+ spin_unlock_irqrestore(&fimc->slock, flags);
+
+ timeout = wait_event_timeout(fimc->irq_queue,
+ test_bit(ST_M2M_SUSPENDED, &fimc->state),
+ FIMC_SHUTDOWN_TIMEOUT);
+
+ clear_bit(ST_M2M_SUSPENDING, &fimc->state);
+ return timeout == 0 ? -EAGAIN : 0;
+}
+
+static int fimc_m2m_resume(struct fimc_dev *fimc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&fimc->slock, flags);
+ /* Clear for full H/W setup in first run after resume */
+ fimc->m2m.ctx = NULL;
+ spin_unlock_irqrestore(&fimc->slock, flags);
+
+ if (test_and_clear_bit(ST_M2M_SUSPENDED, &fimc->state))
+ fimc_m2m_job_finish(fimc->m2m.ctx,
+ VB2_BUF_STATE_ERROR);
return 0;
}
@@ -1596,7 +1592,6 @@
struct samsung_fimc_driverdata *drv_data;
struct s5p_platform_fimc *pdata;
int ret = 0;
- int cap_input_index = -1;
dev_dbg(&pdev->dev, "%s():\n", __func__);
@@ -1614,15 +1609,16 @@
return -ENOMEM;
fimc->id = pdev->id;
+
fimc->variant = drv_data->variant[fimc->id];
fimc->pdev = pdev;
pdata = pdev->dev.platform_data;
fimc->pdata = pdata;
- fimc->state = ST_IDLE;
+
+ set_bit(ST_LPM, &fimc->state);
init_waitqueue_head(&fimc->irq_queue);
spin_lock_init(&fimc->slock);
-
mutex_init(&fimc->lock);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1647,71 +1643,51 @@
goto err_req_region;
}
- fimc->num_clocks = MAX_FIMC_CLOCKS - 1;
-
- /* Check if a video capture node needs to be registered. */
- if (pdata && pdata->num_clients > 0) {
- cap_input_index = 0;
- fimc->num_clocks++;
- }
-
- ret = fimc_clk_get(fimc);
- if (ret)
- goto err_regs_unmap;
- clk_set_rate(fimc->clock[CLK_BUS], drv_data->lclk_frequency);
-
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get IRQ resource\n");
ret = -ENXIO;
- goto err_clk;
+ goto err_regs_unmap;
}
fimc->irq = res->start;
- fimc_hw_reset(fimc);
+ fimc->num_clocks = MAX_FIMC_CLOCKS;
+ ret = fimc_clk_get(fimc);
+ if (ret)
+ goto err_regs_unmap;
+ clk_set_rate(fimc->clock[CLK_BUS], drv_data->lclk_frequency);
+ clk_enable(fimc->clock[CLK_BUS]);
- ret = request_irq(fimc->irq, fimc_isr, 0, pdev->name, fimc);
+ platform_set_drvdata(pdev, fimc);
+
+ ret = request_irq(fimc->irq, fimc_irq_handler, 0, pdev->name, fimc);
if (ret) {
dev_err(&pdev->dev, "failed to install irq (%d)\n", ret);
goto err_clk;
}
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ goto err_irq;
/* Initialize contiguous memory allocator */
- fimc->alloc_ctx = vb2_dma_contig_init_ctx(&fimc->pdev->dev);
+ fimc->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
if (IS_ERR(fimc->alloc_ctx)) {
ret = PTR_ERR(fimc->alloc_ctx);
- goto err_irq;
+ goto err_pm;
}
- ret = fimc_register_m2m_device(fimc);
- if (ret)
- goto err_irq;
+ dev_dbg(&pdev->dev, "FIMC.%d registered successfully\n", fimc->id);
- /* At least one camera sensor is required to register capture node */
- if (cap_input_index >= 0) {
- ret = fimc_register_capture_device(fimc);
- if (ret)
- goto err_m2m;
- clk_disable(fimc->clock[CLK_CAM]);
- }
- /*
- * Exclude the additional output DMA address registers by masking
- * them out on HW revisions that provide extended capabilites.
- */
- if (fimc->variant->out_buf_count > 4)
- fimc_hw_set_dma_seq(fimc, 0xF);
-
- dev_dbg(&pdev->dev, "%s(): fimc-%d registered successfully\n",
- __func__, fimc->id);
-
+ pm_runtime_put(&pdev->dev);
return 0;
-err_m2m:
- fimc_unregister_m2m_device(fimc);
+err_pm:
+ pm_runtime_put(&pdev->dev);
err_irq:
free_irq(fimc->irq, fimc);
err_clk:
- fimc_clk_release(fimc);
+ fimc_clk_put(fimc);
err_regs_unmap:
iounmap(fimc->regs);
err_req_region:
@@ -1719,31 +1695,105 @@
kfree(fimc->regs_res);
err_info:
kfree(fimc);
-
return ret;
}
+static int fimc_runtime_resume(struct device *dev)
+{
+ struct fimc_dev *fimc = dev_get_drvdata(dev);
+
+ dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state);
+
+ /* Enable clocks and perform basic initalization */
+ clk_enable(fimc->clock[CLK_GATE]);
+ fimc_hw_reset(fimc);
+ if (fimc->variant->out_buf_count > 4)
+ fimc_hw_set_dma_seq(fimc, 0xF);
+
+ /* Resume the capture or mem-to-mem device */
+ if (fimc_capture_busy(fimc))
+ return fimc_capture_resume(fimc);
+ else if (fimc_m2m_pending(fimc))
+ return fimc_m2m_resume(fimc);
+ return 0;
+}
+
+static int fimc_runtime_suspend(struct device *dev)
+{
+ struct fimc_dev *fimc = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (fimc_capture_busy(fimc))
+ ret = fimc_capture_suspend(fimc);
+ else
+ ret = fimc_m2m_suspend(fimc);
+ if (!ret)
+ clk_disable(fimc->clock[CLK_GATE]);
+
+ dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state);
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int fimc_resume(struct device *dev)
+{
+ struct fimc_dev *fimc = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state);
+
+ /* Do not resume if the device was idle before system suspend */
+ spin_lock_irqsave(&fimc->slock, flags);
+ if (!test_and_clear_bit(ST_LPM, &fimc->state) ||
+ (!fimc_m2m_active(fimc) && !fimc_capture_busy(fimc))) {
+ spin_unlock_irqrestore(&fimc->slock, flags);
+ return 0;
+ }
+ fimc_hw_reset(fimc);
+ if (fimc->variant->out_buf_count > 4)
+ fimc_hw_set_dma_seq(fimc, 0xF);
+ spin_unlock_irqrestore(&fimc->slock, flags);
+
+ if (fimc_capture_busy(fimc))
+ return fimc_capture_resume(fimc);
+
+ return fimc_m2m_resume(fimc);
+}
+
+static int fimc_suspend(struct device *dev)
+{
+ struct fimc_dev *fimc = dev_get_drvdata(dev);
+
+ dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state);
+
+ if (test_and_set_bit(ST_LPM, &fimc->state))
+ return 0;
+ if (fimc_capture_busy(fimc))
+ return fimc_capture_suspend(fimc);
+
+ return fimc_m2m_suspend(fimc);
+}
+#endif /* CONFIG_PM_SLEEP */
+
static int __devexit fimc_remove(struct platform_device *pdev)
{
- struct fimc_dev *fimc =
- (struct fimc_dev *)platform_get_drvdata(pdev);
+ struct fimc_dev *fimc = platform_get_drvdata(pdev);
- free_irq(fimc->irq, fimc);
- fimc_hw_reset(fimc);
-
- fimc_unregister_m2m_device(fimc);
- fimc_unregister_capture_device(fimc);
-
- fimc_clk_release(fimc);
+ pm_runtime_disable(&pdev->dev);
+ fimc_runtime_suspend(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx);
+ clk_disable(fimc->clock[CLK_BUS]);
+ fimc_clk_put(fimc);
+ free_irq(fimc->irq, fimc);
iounmap(fimc->regs);
release_resource(fimc->regs_res);
kfree(fimc->regs_res);
kfree(fimc);
- dev_info(&pdev->dev, "%s driver unloaded\n", pdev->name);
+ dev_info(&pdev->dev, "driver unloaded\n");
return 0;
}
@@ -1786,6 +1836,7 @@
static struct samsung_fimc_variant fimc0_variant_s5p = {
.has_inp_rot = 1,
.has_out_rot = 1,
+ .has_cam_if = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 8,
@@ -1794,6 +1845,7 @@
};
static struct samsung_fimc_variant fimc2_variant_s5p = {
+ .has_cam_if = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 8,
@@ -1805,6 +1857,7 @@
.pix_hoff = 1,
.has_inp_rot = 1,
.has_out_rot = 1,
+ .has_cam_if = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 8,
@@ -1816,6 +1869,7 @@
.pix_hoff = 1,
.has_inp_rot = 1,
.has_out_rot = 1,
+ .has_cam_if = 1,
.has_mainscaler_ext = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
@@ -1825,6 +1879,7 @@
};
static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+ .has_cam_if = 1,
.pix_hoff = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
@@ -1837,22 +1892,24 @@
.pix_hoff = 1,
.has_inp_rot = 1,
.has_out_rot = 1,
+ .has_cam_if = 1,
.has_cistatus2 = 1,
.has_mainscaler_ext = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
- .hor_offs_align = 1,
+ .hor_offs_align = 2,
.out_buf_count = 32,
.pix_limit = &s5p_pix_limit[1],
};
-static struct samsung_fimc_variant fimc2_variant_exynos4 = {
+static struct samsung_fimc_variant fimc3_variant_exynos4 = {
.pix_hoff = 1,
+ .has_cam_if = 1,
.has_cistatus2 = 1,
.has_mainscaler_ext = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
- .hor_offs_align = 1,
+ .hor_offs_align = 2,
.out_buf_count = 32,
.pix_limit = &s5p_pix_limit[3],
};
@@ -1885,7 +1942,7 @@
[0] = &fimc0_variant_exynos4,
[1] = &fimc0_variant_exynos4,
[2] = &fimc0_variant_exynos4,
- [3] = &fimc2_variant_exynos4,
+ [3] = &fimc3_variant_exynos4,
},
.num_entities = 4,
.lclk_frequency = 166000000UL,
@@ -1906,33 +1963,28 @@
};
MODULE_DEVICE_TABLE(platform, fimc_driver_ids);
+static const struct dev_pm_ops fimc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(fimc_suspend, fimc_resume)
+ SET_RUNTIME_PM_OPS(fimc_runtime_suspend, fimc_runtime_resume, NULL)
+};
+
static struct platform_driver fimc_driver = {
.probe = fimc_probe,
- .remove = __devexit_p(fimc_remove),
+ .remove = __devexit_p(fimc_remove),
.id_table = fimc_driver_ids,
.driver = {
- .name = MODULE_NAME,
+ .name = FIMC_MODULE_NAME,
.owner = THIS_MODULE,
+ .pm = &fimc_pm_ops,
}
};
-static int __init fimc_init(void)
+int __init fimc_register_driver(void)
{
- int ret = platform_driver_register(&fimc_driver);
- if (ret)
- err("platform_driver_register failed: %d\n", ret);
- return ret;
+ return platform_driver_probe(&fimc_driver, fimc_probe);
}
-static void __exit fimc_exit(void)
+void __exit fimc_unregister_driver(void)
{
platform_driver_unregister(&fimc_driver);
}
-
-module_init(fimc_init);
-module_exit(fimc_exit);
-
-MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-MODULE_DESCRIPTION("S5P FIMC camera host interface/video postprocessor driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0.1");
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 1f70772..a6936da 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -11,12 +11,16 @@
/*#define DEBUG*/
+#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/videodev2.h>
#include <linux/io.h>
+
+#include <media/media-entity.h>
#include <media/videobuf2-core.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-mem2mem.h>
#include <media/v4l2-mediabus.h>
@@ -32,38 +36,46 @@
/* Time to wait for next frame VSYNC interrupt while stopping operation. */
#define FIMC_SHUTDOWN_TIMEOUT ((100*HZ)/1000)
-#define MAX_FIMC_CLOCKS 3
-#define MODULE_NAME "s5p-fimc"
+#define MAX_FIMC_CLOCKS 2
+#define FIMC_MODULE_NAME "s5p-fimc"
#define FIMC_MAX_DEVS 4
#define FIMC_MAX_OUT_BUFS 4
#define SCALER_MAX_HRATIO 64
#define SCALER_MAX_VRATIO 64
#define DMA_MIN_SIZE 8
+#define FIMC_CAMIF_MAX_HEIGHT 0x2000
/* indices to the clocks array */
enum {
CLK_BUS,
CLK_GATE,
- CLK_CAM,
};
enum fimc_dev_flags {
- /* for m2m node */
- ST_IDLE,
- ST_OUTDMA_RUN,
+ ST_LPM,
+ /* m2m node */
+ ST_M2M_RUN,
ST_M2M_PEND,
- /* for capture node */
+ ST_M2M_SUSPENDING,
+ ST_M2M_SUSPENDED,
+ /* capture node */
ST_CAPT_PEND,
ST_CAPT_RUN,
ST_CAPT_STREAM,
+ ST_CAPT_ISP_STREAM,
+ ST_CAPT_SUSPENDED,
ST_CAPT_SHUT,
+ ST_CAPT_BUSY,
+ ST_CAPT_APPLY_CFG,
+ ST_CAPT_JPEG,
};
-#define fimc_m2m_active(dev) test_bit(ST_OUTDMA_RUN, &(dev)->state)
+#define fimc_m2m_active(dev) test_bit(ST_M2M_RUN, &(dev)->state)
#define fimc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state)
#define fimc_capture_running(dev) test_bit(ST_CAPT_RUN, &(dev)->state)
#define fimc_capture_pending(dev) test_bit(ST_CAPT_PEND, &(dev)->state)
+#define fimc_capture_busy(dev) test_bit(ST_CAPT_BUSY, &(dev)->state)
enum fimc_datapath {
FIMC_CAMERA,
@@ -83,9 +95,14 @@
S5P_FIMC_CBYCRY422,
S5P_FIMC_CRYCBY422,
S5P_FIMC_YCBCR444_LOCAL,
+ S5P_FIMC_JPEG = 0x40,
};
-#define fimc_fmt_is_rgb(x) ((x) & 0x10)
+#define fimc_fmt_is_rgb(x) (!!((x) & 0x10))
+#define fimc_fmt_is_jpeg(x) (!!((x) & 0x40))
+
+#define IS_M2M(__strt) ((__strt) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE || \
+ __strt == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
/* Cb/Cr chrominance components order for 2 plane Y/CbCr 4:2:2 formats. */
#define S5P_FIMC_LSB_CRCB S5P_CIOCTRL_ORDER422_2P_LSB_CRCB
@@ -104,9 +121,10 @@
#define FIMC_DST_ADDR (1 << 2)
#define FIMC_SRC_FMT (1 << 3)
#define FIMC_DST_FMT (1 << 4)
-#define FIMC_CTX_M2M (1 << 5)
-#define FIMC_CTX_CAP (1 << 6)
-#define FIMC_CTX_SHUT (1 << 7)
+#define FIMC_DST_CROP (1 << 5)
+#define FIMC_CTX_M2M (1 << 16)
+#define FIMC_CTX_CAP (1 << 17)
+#define FIMC_CTX_SHUT (1 << 18)
/* Image conversion flags */
#define FIMC_IN_DMA_ACCESS_TILED (1 << 0)
@@ -122,11 +140,6 @@
/* Y (16 ~ 235), Cb/Cr (16 ~ 240) */
#define FIMC_COLOR_RANGE_NARROW (1 << 3)
-#define FLIP_NONE 0
-#define FLIP_X_AXIS 1
-#define FLIP_Y_AXIS 2
-#define FLIP_XY_AXIS (FLIP_X_AXIS | FLIP_Y_AXIS)
-
/**
* struct fimc_fmt - the driver's internal color format data
* @mbus_code: Media Bus pixel code, -1 if not applicable
@@ -275,26 +288,29 @@
/**
* struct fimc_m2m_device - v4l2 memory-to-memory device data
* @vfd: the video device node for v4l2 m2m mode
- * @v4l2_dev: v4l2 device for m2m mode
* @m2m_dev: v4l2 memory-to-memory device data
* @ctx: hardware context data
* @refcnt: the reference counter
*/
struct fimc_m2m_device {
struct video_device *vfd;
- struct v4l2_device v4l2_dev;
struct v4l2_m2m_dev *m2m_dev;
struct fimc_ctx *ctx;
int refcnt;
};
+#define FIMC_SD_PAD_SINK 0
+#define FIMC_SD_PAD_SOURCE 1
+#define FIMC_SD_PADS_NUM 2
+
/**
* struct fimc_vid_cap - camera capture device information
* @ctx: hardware context data
* @vfd: video device node for camera capture mode
- * @v4l2_dev: v4l2_device struct to manage subdevs
- * @sd: pointer to camera sensor subdevice currently in use
- * @fmt: Media Bus format configured at selected image sensor
+ * @subdev: subdev exposing the FIMC processing block
+ * @vd_pad: fimc video capture node pad
+ * @sd_pads: fimc video processing block pads
+ * @mf: media bus format at the FIMC camera input (and the scaler output) pad
* @pending_buf_q: the pending buffer queue head
* @active_buf_q: the queue head of buffers scheduled in hardware
* @vbq: the capture am video buffer queue
@@ -304,14 +320,17 @@
* @reqbufs_count: the number of buffers requested in REQBUFS ioctl
* @input_index: input (camera sensor) index
* @refcnt: driver's private reference counter
+ * @input: capture input type, grp_id of the attached subdev
+ * @user_subdev_api: true if subdevs are not configured by the host driver
*/
struct fimc_vid_cap {
struct fimc_ctx *ctx;
struct vb2_alloc_ctx *alloc_ctx;
struct video_device *vfd;
- struct v4l2_device v4l2_dev;
- struct v4l2_subdev *sd;;
- struct v4l2_mbus_framefmt fmt;
+ struct v4l2_subdev *subdev;
+ struct media_pad vd_pad;
+ struct v4l2_mbus_framefmt mf;
+ struct media_pad sd_pads[FIMC_SD_PADS_NUM];
struct list_head pending_buf_q;
struct list_head active_buf_q;
struct vb2_queue vbq;
@@ -321,6 +340,8 @@
unsigned int reqbufs_count;
int input_index;
int refcnt;
+ u32 input;
+ bool user_subdev_api;
};
/**
@@ -351,6 +372,7 @@
* @has_cistatus2: 1 if CISTATUS2 register is present in this IP revision
* @has_mainscaler_ext: 1 if extended mainscaler ratios in CIEXTEN register
* are present in this IP revision
+ * @has_cam_if: set if this instance has a camera input interface
* @pix_limit: pixel size constraints for the scaler
* @min_inp_pixsize: minimum input pixel size
* @min_out_pixsize: minimum output pixel size
@@ -363,6 +385,7 @@
unsigned int has_out_rot:1;
unsigned int has_cistatus2:1;
unsigned int has_mainscaler_ext:1;
+ unsigned int has_cam_if:1;
struct fimc_pix_limit *pix_limit;
u16 min_inp_pixsize;
u16 min_out_pixsize;
@@ -383,6 +406,12 @@
int num_entities;
};
+struct fimc_pipeline {
+ struct media_pipeline *pipe;
+ struct v4l2_subdev *sensor;
+ struct v4l2_subdev *csis;
+};
+
struct fimc_ctx;
/**
@@ -399,10 +428,12 @@
* @regs_res: the resource claimed for IO registers
* @irq: FIMC interrupt number
* @irq_queue: interrupt handler waitqueue
+ * @v4l2_dev: root v4l2_device
* @m2m: memory-to-memory V4L2 device information
* @vid_cap: camera capture device information
* @state: flags used to synchronize m2m and capture mode operation
* @alloc_ctx: videobuf2 memory allocator context
+ * @pipeline: fimc video capture pipeline data structure
*/
struct fimc_dev {
spinlock_t slock;
@@ -417,10 +448,12 @@
struct resource *regs_res;
int irq;
wait_queue_head_t irq_queue;
+ struct v4l2_device *v4l2_dev;
struct fimc_m2m_device m2m;
struct fimc_vid_cap vid_cap;
unsigned long state;
struct vb2_alloc_ctx *alloc_ctx;
+ struct fimc_pipeline pipeline;
};
/**
@@ -437,11 +470,18 @@
* @scaler: image scaler properties
* @effect: image effect
* @rotation: image clockwise rotation in degrees
- * @flip: image flip mode
+ * @hflip: indicates image horizontal flip if set
+ * @vflip: indicates image vertical flip if set
* @flags: additional flags for image conversion
* @state: flags to keep track of user configuration
* @fimc_dev: the FIMC device this context applies to
* @m2m_ctx: memory-to-memory device context
+ * @fh: v4l2 file handle
+ * @ctrl_handler: v4l2 controls handler
+ * @ctrl_rotate image rotation control
+ * @ctrl_hflip horizontal flip control
+ * @ctrl_vflip vartical flip control
+ * @ctrls_rdy: true if the control handler is initialized
*/
struct fimc_ctx {
spinlock_t slock;
@@ -456,13 +496,49 @@
struct fimc_scaler scaler;
struct fimc_effect effect;
int rotation;
- u32 flip;
+ unsigned int hflip:1;
+ unsigned int vflip:1;
u32 flags;
u32 state;
struct fimc_dev *fimc_dev;
struct v4l2_m2m_ctx *m2m_ctx;
+ struct v4l2_fh fh;
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct v4l2_ctrl *ctrl_rotate;
+ struct v4l2_ctrl *ctrl_hflip;
+ struct v4l2_ctrl *ctrl_vflip;
+ bool ctrls_rdy;
};
+#define fh_to_ctx(__fh) container_of(__fh, struct fimc_ctx, fh)
+
+static inline void set_frame_bounds(struct fimc_frame *f, u32 width, u32 height)
+{
+ f->o_width = width;
+ f->o_height = height;
+ f->f_width = width;
+ f->f_height = height;
+}
+
+static inline void set_frame_crop(struct fimc_frame *f,
+ u32 left, u32 top, u32 width, u32 height)
+{
+ f->offs_h = left;
+ f->offs_v = top;
+ f->width = width;
+ f->height = height;
+}
+
+static inline u32 fimc_get_format_depth(struct fimc_fmt *ff)
+{
+ u32 i, depth = 0;
+
+ if (ff != NULL)
+ for (i = 0; i < ff->colplanes; i++)
+ depth += ff->depth[i];
+ return depth;
+}
+
static inline bool fimc_capture_active(struct fimc_dev *fimc)
{
unsigned long flags;
@@ -561,7 +637,7 @@
} else if (V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE == type) {
frame = &ctx->d_frame;
} else {
- v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
+ v4l2_err(ctx->fimc_dev->v4l2_dev,
"Wrong buffer/video queue type (%d)\n", type);
return ERR_PTR(-EINVAL);
}
@@ -595,7 +671,7 @@
void fimc_hw_set_prescaler(struct fimc_ctx *ctx);
void fimc_hw_set_mainscaler(struct fimc_ctx *ctx);
void fimc_hw_en_capture(struct fimc_ctx *ctx);
-void fimc_hw_set_effect(struct fimc_ctx *ctx);
+void fimc_hw_set_effect(struct fimc_ctx *ctx, bool active);
void fimc_hw_set_in_dma(struct fimc_ctx *ctx);
void fimc_hw_set_input_path(struct fimc_ctx *ctx);
void fimc_hw_set_output_path(struct fimc_ctx *ctx);
@@ -614,36 +690,45 @@
/* fimc-core.c */
int fimc_vidioc_enum_fmt_mplane(struct file *file, void *priv,
struct v4l2_fmtdesc *f);
-int fimc_vidioc_g_fmt_mplane(struct file *file, void *priv,
- struct v4l2_format *f);
-int fimc_vidioc_try_fmt_mplane(struct file *file, void *priv,
- struct v4l2_format *f);
-int fimc_vidioc_queryctrl(struct file *file, void *priv,
- struct v4l2_queryctrl *qc);
-int fimc_vidioc_g_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl);
+int fimc_ctrls_create(struct fimc_ctx *ctx);
+void fimc_ctrls_delete(struct fimc_ctx *ctx);
+void fimc_ctrls_activate(struct fimc_ctx *ctx, bool active);
+int fimc_fill_format(struct fimc_frame *frame, struct v4l2_format *f);
+void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height,
+ struct v4l2_pix_format_mplane *pix);
+struct fimc_fmt *fimc_find_format(u32 *pixelformat, u32 *mbus_code,
+ unsigned int mask, int index);
-int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr);
-int check_ctrl_val(struct fimc_ctx *ctx, struct v4l2_control *ctrl);
-int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl);
-
-struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask);
-struct fimc_fmt *find_mbus_format(struct v4l2_mbus_framefmt *f,
- unsigned int mask);
-
-int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot);
+int fimc_check_scaler_ratio(struct fimc_ctx *ctx, int sw, int sh,
+ int dw, int dh, int rotation);
int fimc_set_scaler_info(struct fimc_ctx *ctx);
int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags);
int fimc_prepare_addr(struct fimc_ctx *ctx, struct vb2_buffer *vb,
struct fimc_frame *frame, struct fimc_addr *paddr);
+void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f);
+void fimc_set_yuv_order(struct fimc_ctx *ctx);
+void fimc_fill_frame(struct fimc_frame *frame, struct v4l2_format *f);
+void fimc_capture_irq_handler(struct fimc_dev *fimc, bool done);
+
+int fimc_register_m2m_device(struct fimc_dev *fimc,
+ struct v4l2_device *v4l2_dev);
+void fimc_unregister_m2m_device(struct fimc_dev *fimc);
+int fimc_register_driver(void);
+void fimc_unregister_driver(void);
/* -----------------------------------------------------*/
/* fimc-capture.c */
-int fimc_register_capture_device(struct fimc_dev *fimc);
+int fimc_register_capture_device(struct fimc_dev *fimc,
+ struct v4l2_device *v4l2_dev);
void fimc_unregister_capture_device(struct fimc_dev *fimc);
-int fimc_sensor_sd_init(struct fimc_dev *fimc, int index);
+int fimc_capture_ctrls_create(struct fimc_dev *fimc);
int fimc_vid_cap_buf_queue(struct fimc_dev *fimc,
struct fimc_vid_buffer *fimc_vb);
+void fimc_sensor_notify(struct v4l2_subdev *sd, unsigned int notification,
+ void *arg);
+int fimc_capture_suspend(struct fimc_dev *fimc);
+int fimc_capture_resume(struct fimc_dev *fimc);
+int fimc_capture_config_update(struct fimc_ctx *ctx);
/* Locking: the caller holds fimc->slock */
static inline void fimc_activate_capture(struct fimc_ctx *ctx)
@@ -661,22 +746,27 @@
}
/*
- * Add buf to the capture active buffers queue.
- * Locking: Need to be called with fimc_dev::slock held.
+ * Buffer list manipulation functions. Must be called with fimc.slock held.
*/
-static inline void active_queue_add(struct fimc_vid_cap *vid_cap,
- struct fimc_vid_buffer *buf)
+
+/**
+ * fimc_active_queue_add - add buffer to the capture active buffers queue
+ * @buf: buffer to add to the active buffers list
+ */
+static inline void fimc_active_queue_add(struct fimc_vid_cap *vid_cap,
+ struct fimc_vid_buffer *buf)
{
list_add_tail(&buf->list, &vid_cap->active_buf_q);
vid_cap->active_buf_cnt++;
}
-/*
- * Pop a video buffer from the capture active buffers queue
- * Locking: Need to be called with fimc_dev::slock held.
+/**
+ * fimc_active_queue_pop - pop buffer from the capture active buffers queue
+ *
+ * The caller must assure the active_buf_q list is not empty.
*/
-static inline struct fimc_vid_buffer *
-active_queue_pop(struct fimc_vid_cap *vid_cap)
+static inline struct fimc_vid_buffer *fimc_active_queue_pop(
+ struct fimc_vid_cap *vid_cap)
{
struct fimc_vid_buffer *buf;
buf = list_entry(vid_cap->active_buf_q.next,
@@ -686,16 +776,23 @@
return buf;
}
-/* Add video buffer to the capture pending buffers queue */
+/**
+ * fimc_pending_queue_add - add buffer to the capture pending buffers queue
+ * @buf: buffer to add to the pending buffers list
+ */
static inline void fimc_pending_queue_add(struct fimc_vid_cap *vid_cap,
struct fimc_vid_buffer *buf)
{
list_add_tail(&buf->list, &vid_cap->pending_buf_q);
}
-/* Add video buffer to the capture pending buffers queue */
-static inline struct fimc_vid_buffer *
-pending_queue_pop(struct fimc_vid_cap *vid_cap)
+/**
+ * fimc_pending_queue_pop - pop buffer from the capture pending buffers queue
+ *
+ * The caller must assure the pending_buf_q list is not empty.
+ */
+static inline struct fimc_vid_buffer *fimc_pending_queue_pop(
+ struct fimc_vid_cap *vid_cap)
{
struct fimc_vid_buffer *buf;
buf = list_entry(vid_cap->pending_buf_q.next,
diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c
new file mode 100644
index 0000000..cc337b1d
--- /dev/null
+++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c
@@ -0,0 +1,858 @@
+/*
+ * S5P/EXYNOS4 SoC series camera host interface media device driver
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation, either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <media/v4l2-ctrls.h>
+#include <media/media-device.h>
+
+#include "fimc-core.h"
+#include "fimc-mdevice.h"
+#include "mipi-csis.h"
+
+static int __fimc_md_set_camclk(struct fimc_md *fmd,
+ struct fimc_sensor_info *s_info,
+ bool on);
+/**
+ * fimc_pipeline_prepare - update pipeline information with subdevice pointers
+ * @fimc: fimc device terminating the pipeline
+ *
+ * Caller holds the graph mutex.
+ */
+void fimc_pipeline_prepare(struct fimc_dev *fimc, struct media_entity *me)
+{
+ struct media_entity_graph graph;
+ struct v4l2_subdev *sd;
+
+ media_entity_graph_walk_start(&graph, me);
+
+ while ((me = media_entity_graph_walk_next(&graph))) {
+ if (media_entity_type(me) != MEDIA_ENT_T_V4L2_SUBDEV)
+ continue;
+ sd = media_entity_to_v4l2_subdev(me);
+
+ if (sd->grp_id == SENSOR_GROUP_ID)
+ fimc->pipeline.sensor = sd;
+ else if (sd->grp_id == CSIS_GROUP_ID)
+ fimc->pipeline.csis = sd;
+ }
+}
+
+/**
+ * __subdev_set_power - change power state of a single subdev
+ * @sd: subdevice to change power state for
+ * @on: 1 to enable power or 0 to disable
+ *
+ * Return result of s_power subdev operation or -ENXIO if sd argument
+ * is NULL. Return 0 if the subdevice does not implement s_power.
+ */
+static int __subdev_set_power(struct v4l2_subdev *sd, int on)
+{
+ int *use_count;
+ int ret;
+
+ if (sd == NULL)
+ return -ENXIO;
+
+ use_count = &sd->entity.use_count;
+ if (on && (*use_count)++ > 0)
+ return 0;
+ else if (!on && (*use_count == 0 || --(*use_count) > 0))
+ return 0;
+ ret = v4l2_subdev_call(sd, core, s_power, on);
+
+ return ret != -ENOIOCTLCMD ? ret : 0;
+}
+
+/**
+ * fimc_pipeline_s_power - change power state of all pipeline subdevs
+ * @fimc: fimc device terminating the pipeline
+ * @state: 1 to enable power or 0 for power down
+ *
+ * Need to be called with the graph mutex held.
+ */
+int fimc_pipeline_s_power(struct fimc_dev *fimc, int state)
+{
+ int ret = 0;
+
+ if (fimc->pipeline.sensor == NULL)
+ return -ENXIO;
+
+ if (state) {
+ ret = __subdev_set_power(fimc->pipeline.csis, 1);
+ if (ret && ret != -ENXIO)
+ return ret;
+ return __subdev_set_power(fimc->pipeline.sensor, 1);
+ }
+
+ ret = __subdev_set_power(fimc->pipeline.sensor, 0);
+ if (ret)
+ return ret;
+ ret = __subdev_set_power(fimc->pipeline.csis, 0);
+
+ return ret == -ENXIO ? 0 : ret;
+}
+
+/**
+ * __fimc_pipeline_initialize - update the pipeline information, enable power
+ * of all pipeline subdevs and the sensor clock
+ * @me: media entity to start graph walk with
+ * @prep: true to acquire sensor (and csis) subdevs
+ *
+ * This function must be called with the graph mutex held.
+ */
+static int __fimc_pipeline_initialize(struct fimc_dev *fimc,
+ struct media_entity *me, bool prep)
+{
+ int ret;
+
+ if (prep)
+ fimc_pipeline_prepare(fimc, me);
+ if (fimc->pipeline.sensor == NULL)
+ return -EINVAL;
+ ret = fimc_md_set_camclk(fimc->pipeline.sensor, true);
+ if (ret)
+ return ret;
+ return fimc_pipeline_s_power(fimc, 1);
+}
+
+int fimc_pipeline_initialize(struct fimc_dev *fimc, struct media_entity *me,
+ bool prep)
+{
+ int ret;
+
+ mutex_lock(&me->parent->graph_mutex);
+ ret = __fimc_pipeline_initialize(fimc, me, prep);
+ mutex_unlock(&me->parent->graph_mutex);
+
+ return ret;
+}
+
+/**
+ * __fimc_pipeline_shutdown - disable the sensor clock and pipeline power
+ * @fimc: fimc device terminating the pipeline
+ *
+ * Disable power of all subdevs in the pipeline and turn off the external
+ * sensor clock.
+ * Called with the graph mutex held.
+ */
+int __fimc_pipeline_shutdown(struct fimc_dev *fimc)
+{
+ int ret = 0;
+
+ if (fimc->pipeline.sensor) {
+ ret = fimc_pipeline_s_power(fimc, 0);
+ fimc_md_set_camclk(fimc->pipeline.sensor, false);
+ }
+ return ret == -ENXIO ? 0 : ret;
+}
+
+int fimc_pipeline_shutdown(struct fimc_dev *fimc)
+{
+ struct media_entity *me = &fimc->vid_cap.vfd->entity;
+ int ret;
+
+ mutex_lock(&me->parent->graph_mutex);
+ ret = __fimc_pipeline_shutdown(fimc);
+ mutex_unlock(&me->parent->graph_mutex);
+
+ return ret;
+}
+
+/**
+ * fimc_pipeline_s_stream - invoke s_stream on pipeline subdevs
+ * @fimc: fimc device terminating the pipeline
+ * @on: passed as the s_stream call argument
+ */
+int fimc_pipeline_s_stream(struct fimc_dev *fimc, int on)
+{
+ struct fimc_pipeline *p = &fimc->pipeline;
+ int ret = 0;
+
+ if (p->sensor == NULL)
+ return -ENODEV;
+
+ if ((on && p->csis) || !on)
+ ret = v4l2_subdev_call(on ? p->csis : p->sensor,
+ video, s_stream, on);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
+ return ret;
+ if ((!on && p->csis) || on)
+ ret = v4l2_subdev_call(on ? p->sensor : p->csis,
+ video, s_stream, on);
+ return ret == -ENOIOCTLCMD ? 0 : ret;
+}
+
+/*
+ * Sensor subdevice helper functions
+ */
+static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd,
+ struct fimc_sensor_info *s_info)
+{
+ struct i2c_adapter *adapter;
+ struct v4l2_subdev *sd = NULL;
+
+ if (!s_info || !fmd)
+ return NULL;
+
+ adapter = i2c_get_adapter(s_info->pdata->i2c_bus_num);
+ if (!adapter)
+ return NULL;
+ sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter,
+ s_info->pdata->board_info, NULL);
+ if (IS_ERR_OR_NULL(sd)) {
+ v4l2_err(&fmd->v4l2_dev, "Failed to acquire subdev\n");
+ return NULL;
+ }
+ v4l2_set_subdev_hostdata(sd, s_info);
+ sd->grp_id = SENSOR_GROUP_ID;
+
+ v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice %s\n",
+ s_info->pdata->board_info->type);
+ return sd;
+}
+
+static void fimc_md_unregister_sensor(struct v4l2_subdev *sd)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!client)
+ return;
+ v4l2_device_unregister_subdev(sd);
+ i2c_unregister_device(client);
+ i2c_put_adapter(client->adapter);
+}
+
+static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
+{
+ struct s5p_platform_fimc *pdata = fmd->pdev->dev.platform_data;
+ struct fimc_dev *fd = NULL;
+ int num_clients, ret, i;
+
+ /*
+ * Runtime resume one of the FIMC entities to make sure
+ * the sclk_cam clocks are not globally disabled.
+ */
+ for (i = 0; !fd && i < ARRAY_SIZE(fmd->fimc); i++)
+ if (fmd->fimc[i])
+ fd = fmd->fimc[i];
+ if (!fd)
+ return -ENXIO;
+ ret = pm_runtime_get_sync(&fd->pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ WARN_ON(pdata->num_clients > ARRAY_SIZE(fmd->sensor));
+ num_clients = min_t(u32, pdata->num_clients, ARRAY_SIZE(fmd->sensor));
+
+ fmd->num_sensors = num_clients;
+ for (i = 0; i < num_clients; i++) {
+ fmd->sensor[i].pdata = &pdata->isp_info[i];
+ ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], true);
+ if (ret)
+ break;
+ fmd->sensor[i].subdev =
+ fimc_md_register_sensor(fmd, &fmd->sensor[i]);
+ ret = __fimc_md_set_camclk(fmd, &fmd->sensor[i], false);
+ if (ret)
+ break;
+ }
+ pm_runtime_put(&fd->pdev->dev);
+ return ret;
+}
+
+/*
+ * MIPI CSIS and FIMC platform devices registration.
+ */
+static int fimc_register_callback(struct device *dev, void *p)
+{
+ struct fimc_dev *fimc = dev_get_drvdata(dev);
+ struct fimc_md *fmd = p;
+ int ret;
+
+ if (!fimc || !fimc->pdev)
+ return 0;
+ if (fimc->pdev->id < 0 || fimc->pdev->id >= FIMC_MAX_DEVS)
+ return 0;
+
+ fmd->fimc[fimc->pdev->id] = fimc;
+ ret = fimc_register_m2m_device(fimc, &fmd->v4l2_dev);
+ if (ret)
+ return ret;
+ ret = fimc_register_capture_device(fimc, &fmd->v4l2_dev);
+ if (!ret)
+ fimc->vid_cap.user_subdev_api = fmd->user_subdev_api;
+ return ret;
+}
+
+static int csis_register_callback(struct device *dev, void *p)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct platform_device *pdev;
+ struct fimc_md *fmd = p;
+ int id, ret;
+
+ if (!sd)
+ return 0;
+ pdev = v4l2_get_subdevdata(sd);
+ if (!pdev || pdev->id < 0 || pdev->id >= CSIS_MAX_ENTITIES)
+ return 0;
+ v4l2_info(sd, "csis%d sd: %s\n", pdev->id, sd->name);
+
+ id = pdev->id < 0 ? 0 : pdev->id;
+ fmd->csis[id].sd = sd;
+ sd->grp_id = CSIS_GROUP_ID;
+ ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+ if (ret)
+ v4l2_err(&fmd->v4l2_dev,
+ "Failed to register CSIS subdevice: %d\n", ret);
+ return ret;
+}
+
+/**
+ * fimc_md_register_platform_entities - register FIMC and CSIS media entities
+ */
+static int fimc_md_register_platform_entities(struct fimc_md *fmd)
+{
+ struct device_driver *driver;
+ int ret;
+
+ driver = driver_find(FIMC_MODULE_NAME, &platform_bus_type);
+ if (!driver)
+ return -ENODEV;
+ ret = driver_for_each_device(driver, NULL, fmd,
+ fimc_register_callback);
+ put_driver(driver);
+ if (ret)
+ return ret;
+
+ driver = driver_find(CSIS_DRIVER_NAME, &platform_bus_type);
+ if (driver) {
+ ret = driver_for_each_device(driver, NULL, fmd,
+ csis_register_callback);
+ put_driver(driver);
+ }
+ return ret;
+}
+
+static void fimc_md_unregister_entities(struct fimc_md *fmd)
+{
+ int i;
+
+ for (i = 0; i < FIMC_MAX_DEVS; i++) {
+ if (fmd->fimc[i] == NULL)
+ continue;
+ fimc_unregister_m2m_device(fmd->fimc[i]);
+ fimc_unregister_capture_device(fmd->fimc[i]);
+ fmd->fimc[i] = NULL;
+ }
+ for (i = 0; i < CSIS_MAX_ENTITIES; i++) {
+ if (fmd->csis[i].sd == NULL)
+ continue;
+ v4l2_device_unregister_subdev(fmd->csis[i].sd);
+ fmd->csis[i].sd = NULL;
+ }
+ for (i = 0; i < fmd->num_sensors; i++) {
+ if (fmd->sensor[i].subdev == NULL)
+ continue;
+ fimc_md_unregister_sensor(fmd->sensor[i].subdev);
+ fmd->sensor[i].subdev = NULL;
+ }
+}
+
+static int fimc_md_register_video_nodes(struct fimc_md *fmd)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < FIMC_MAX_DEVS && !ret; i++) {
+ if (!fmd->fimc[i])
+ continue;
+
+ if (fmd->fimc[i]->m2m.vfd)
+ ret = video_register_device(fmd->fimc[i]->m2m.vfd,
+ VFL_TYPE_GRABBER, -1);
+ if (ret)
+ break;
+ if (fmd->fimc[i]->vid_cap.vfd)
+ ret = video_register_device(fmd->fimc[i]->vid_cap.vfd,
+ VFL_TYPE_GRABBER, -1);
+ }
+
+ return ret;
+}
+
+/**
+ * __fimc_md_create_fimc_links - create links to all FIMC entities
+ * @fmd: fimc media device
+ * @source: the source entity to create links to all fimc entities from
+ * @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null
+ * @pad: the source entity pad index
+ * @fimc_id: index of the fimc device for which link should be enabled
+ */
+static int __fimc_md_create_fimc_links(struct fimc_md *fmd,
+ struct media_entity *source,
+ struct v4l2_subdev *sensor,
+ int pad, int fimc_id)
+{
+ struct fimc_sensor_info *s_info;
+ struct media_entity *sink;
+ unsigned int flags;
+ int ret, i;
+
+ for (i = 0; i < FIMC_MAX_DEVS; i++) {
+ if (!fmd->fimc[i])
+ break;
+ /*
+ * Some FIMC variants are not fitted with camera capture
+ * interface. Skip creating a link from sensor for those.
+ */
+ if (sensor->grp_id == SENSOR_GROUP_ID &&
+ !fmd->fimc[i]->variant->has_cam_if)
+ continue;
+
+ flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ sink = &fmd->fimc[i]->vid_cap.subdev->entity;
+ ret = media_entity_create_link(source, pad, sink,
+ FIMC_SD_PAD_SINK, flags);
+ if (ret)
+ return ret;
+
+ /* Notify FIMC capture subdev entity */
+ ret = media_entity_call(sink, link_setup, &sink->pads[0],
+ &source->pads[pad], flags);
+ if (ret)
+ break;
+
+ v4l2_info(&fmd->v4l2_dev, "created link [%s] %c> [%s]",
+ source->name, flags ? '=' : '-', sink->name);
+
+ if (flags == 0)
+ continue;
+ s_info = v4l2_get_subdev_hostdata(sensor);
+ if (!WARN_ON(s_info == NULL)) {
+ unsigned long irq_flags;
+ spin_lock_irqsave(&fmd->slock, irq_flags);
+ s_info->host = fmd->fimc[i];
+ spin_unlock_irqrestore(&fmd->slock, irq_flags);
+ }
+ }
+ return 0;
+}
+
+/**
+ * fimc_md_create_links - create default links between registered entities
+ *
+ * Parallel interface sensor entities are connected directly to FIMC capture
+ * entities. The sensors using MIPI CSIS bus are connected through immutable
+ * link with CSI receiver entity specified by mux_id. Any registered CSIS
+ * entity has a link to each registered FIMC capture entity. Enabled links
+ * are created by default between each subsequent registered sensor and
+ * subsequent FIMC capture entity. The number of default active links is
+ * determined by the number of available sensors or FIMC entities,
+ * whichever is less.
+ */
+static int fimc_md_create_links(struct fimc_md *fmd)
+{
+ struct v4l2_subdev *sensor, *csis;
+ struct s5p_fimc_isp_info *pdata;
+ struct fimc_sensor_info *s_info;
+ struct media_entity *source, *sink;
+ int i, pad, fimc_id = 0;
+ int ret = 0;
+ u32 flags;
+
+ for (i = 0; i < fmd->num_sensors; i++) {
+ if (fmd->sensor[i].subdev == NULL)
+ continue;
+
+ sensor = fmd->sensor[i].subdev;
+ s_info = v4l2_get_subdev_hostdata(sensor);
+ if (!s_info || !s_info->pdata)
+ continue;
+
+ source = NULL;
+ pdata = s_info->pdata;
+
+ switch (pdata->bus_type) {
+ case FIMC_MIPI_CSI2:
+ if (WARN(pdata->mux_id >= CSIS_MAX_ENTITIES,
+ "Wrong CSI channel id: %d\n", pdata->mux_id))
+ return -EINVAL;
+
+ csis = fmd->csis[pdata->mux_id].sd;
+ if (WARN(csis == NULL,
+ "MIPI-CSI interface specified "
+ "but s5p-csis module is not loaded!\n"))
+ continue;
+
+ ret = media_entity_create_link(&sensor->entity, 0,
+ &csis->entity, CSIS_PAD_SINK,
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+
+ v4l2_info(&fmd->v4l2_dev, "created link [%s] => [%s]",
+ sensor->entity.name, csis->entity.name);
+
+ source = &csis->entity;
+ pad = CSIS_PAD_SOURCE;
+ break;
+
+ case FIMC_ITU_601...FIMC_ITU_656:
+ source = &sensor->entity;
+ pad = 0;
+ break;
+
+ default:
+ v4l2_err(&fmd->v4l2_dev, "Wrong bus_type: %x\n",
+ pdata->bus_type);
+ return -EINVAL;
+ }
+ if (source == NULL)
+ continue;
+
+ ret = __fimc_md_create_fimc_links(fmd, source, sensor, pad,
+ fimc_id++);
+ }
+ /* Create immutable links between each FIMC's subdev and video node */
+ flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED;
+ for (i = 0; i < FIMC_MAX_DEVS; i++) {
+ if (!fmd->fimc[i])
+ continue;
+ source = &fmd->fimc[i]->vid_cap.subdev->entity;
+ sink = &fmd->fimc[i]->vid_cap.vfd->entity;
+ ret = media_entity_create_link(source, FIMC_SD_PAD_SOURCE,
+ sink, 0, flags);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * The peripheral sensor clock management.
+ */
+static int fimc_md_get_clocks(struct fimc_md *fmd)
+{
+ char clk_name[32];
+ struct clk *clock;
+ int i;
+
+ for (i = 0; i < FIMC_MAX_CAMCLKS; i++) {
+ snprintf(clk_name, sizeof(clk_name), "sclk_cam%u", i);
+ clock = clk_get(NULL, clk_name);
+ if (IS_ERR_OR_NULL(clock)) {
+ v4l2_err(&fmd->v4l2_dev, "Failed to get clock: %s",
+ clk_name);
+ return -ENXIO;
+ }
+ fmd->camclk[i].clock = clock;
+ }
+ return 0;
+}
+
+static void fimc_md_put_clocks(struct fimc_md *fmd)
+{
+ int i = FIMC_MAX_CAMCLKS;
+
+ while (--i >= 0) {
+ if (IS_ERR_OR_NULL(fmd->camclk[i].clock))
+ continue;
+ clk_put(fmd->camclk[i].clock);
+ fmd->camclk[i].clock = NULL;
+ }
+}
+
+static int __fimc_md_set_camclk(struct fimc_md *fmd,
+ struct fimc_sensor_info *s_info,
+ bool on)
+{
+ struct s5p_fimc_isp_info *pdata = s_info->pdata;
+ struct fimc_camclk_info *camclk;
+ int ret = 0;
+
+ if (WARN_ON(pdata->clk_id >= FIMC_MAX_CAMCLKS) || fmd == NULL)
+ return -EINVAL;
+
+ if (s_info->clk_on == on)
+ return 0;
+ camclk = &fmd->camclk[pdata->clk_id];
+
+ dbg("camclk %d, f: %lu, clk: %p, on: %d",
+ pdata->clk_id, pdata->clk_frequency, camclk, on);
+
+ if (on) {
+ if (camclk->use_count > 0 &&
+ camclk->frequency != pdata->clk_frequency)
+ return -EINVAL;
+
+ if (camclk->use_count++ == 0) {
+ clk_set_rate(camclk->clock, pdata->clk_frequency);
+ camclk->frequency = pdata->clk_frequency;
+ ret = clk_enable(camclk->clock);
+ }
+ s_info->clk_on = 1;
+ dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
+ clk_get_rate(camclk->clock));
+
+ return ret;
+ }
+
+ if (WARN_ON(camclk->use_count == 0))
+ return 0;
+
+ if (--camclk->use_count == 0) {
+ clk_disable(camclk->clock);
+ s_info->clk_on = 0;
+ dbg("Disabled camclk %d", pdata->clk_id);
+ }
+ return ret;
+}
+
+/**
+ * fimc_md_set_camclk - peripheral sensor clock setup
+ * @sd: sensor subdev to configure sclk_cam clock for
+ * @on: 1 to enable or 0 to disable the clock
+ *
+ * There are 2 separate clock outputs available in the SoC for external
+ * image processors. These clocks are shared between all registered FIMC
+ * devices to which sensors can be attached, either directly or through
+ * the MIPI CSI receiver. The clock is allowed here to be used by
+ * multiple sensors concurrently if they use same frequency.
+ * The per sensor subdev clk_on attribute helps to synchronize accesses
+ * to the sclk_cam clocks from the video and media device nodes.
+ * This function should only be called when the graph mutex is held.
+ */
+int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on)
+{
+ struct fimc_sensor_info *s_info = v4l2_get_subdev_hostdata(sd);
+ struct fimc_md *fmd = entity_to_fimc_mdev(&sd->entity);
+
+ return __fimc_md_set_camclk(fmd, s_info, on);
+}
+
+static int fimc_md_link_notify(struct media_pad *source,
+ struct media_pad *sink, u32 flags)
+{
+ struct v4l2_subdev *sd;
+ struct fimc_dev *fimc;
+ int ret = 0;
+
+ if (media_entity_type(sink->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+ return 0;
+
+ sd = media_entity_to_v4l2_subdev(sink->entity);
+ fimc = v4l2_get_subdevdata(sd);
+
+ if (!(flags & MEDIA_LNK_FL_ENABLED)) {
+ ret = __fimc_pipeline_shutdown(fimc);
+ fimc->pipeline.sensor = NULL;
+ fimc->pipeline.csis = NULL;
+
+ mutex_lock(&fimc->lock);
+ fimc_ctrls_delete(fimc->vid_cap.ctx);
+ mutex_unlock(&fimc->lock);
+ return ret;
+ }
+ /*
+ * Link activation. Enable power of pipeline elements only if the
+ * pipeline is already in use, i.e. its video node is opened.
+ * Recreate the controls destroyed during the link deactivation.
+ */
+ mutex_lock(&fimc->lock);
+ if (fimc->vid_cap.refcnt > 0) {
+ ret = __fimc_pipeline_initialize(fimc, source->entity, true);
+ if (!ret)
+ ret = fimc_capture_ctrls_create(fimc);
+ }
+ mutex_unlock(&fimc->lock);
+
+ return ret ? -EPIPE : ret;
+}
+
+static ssize_t fimc_md_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fimc_md *fmd = platform_get_drvdata(pdev);
+
+ if (fmd->user_subdev_api)
+ return strlcpy(buf, "Sub-device API (sub-dev)\n", PAGE_SIZE);
+
+ return strlcpy(buf, "V4L2 video node only API (vid-dev)\n", PAGE_SIZE);
+}
+
+static ssize_t fimc_md_sysfs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fimc_md *fmd = platform_get_drvdata(pdev);
+ bool subdev_api;
+ int i;
+
+ if (!strcmp(buf, "vid-dev\n"))
+ subdev_api = false;
+ else if (!strcmp(buf, "sub-dev\n"))
+ subdev_api = true;
+ else
+ return count;
+
+ fmd->user_subdev_api = subdev_api;
+ for (i = 0; i < FIMC_MAX_DEVS; i++)
+ if (fmd->fimc[i])
+ fmd->fimc[i]->vid_cap.user_subdev_api = subdev_api;
+ return count;
+}
+/*
+ * This device attribute is to select video pipeline configuration method.
+ * There are following valid values:
+ * vid-dev - for V4L2 video node API only, subdevice will be configured
+ * by the host driver.
+ * sub-dev - for media controller API, subdevs must be configured in user
+ * space before starting streaming.
+ */
+static DEVICE_ATTR(subdev_conf_mode, S_IWUSR | S_IRUGO,
+ fimc_md_sysfs_show, fimc_md_sysfs_store);
+
+static int __devinit fimc_md_probe(struct platform_device *pdev)
+{
+ struct v4l2_device *v4l2_dev;
+ struct fimc_md *fmd;
+ int ret;
+
+ if (WARN(!pdev->dev.platform_data, "Platform data not specified!\n"))
+ return -EINVAL;
+
+ fmd = kzalloc(sizeof(struct fimc_md), GFP_KERNEL);
+ if (!fmd)
+ return -ENOMEM;
+
+ spin_lock_init(&fmd->slock);
+ fmd->pdev = pdev;
+
+ strlcpy(fmd->media_dev.model, "SAMSUNG S5P FIMC",
+ sizeof(fmd->media_dev.model));
+ fmd->media_dev.link_notify = fimc_md_link_notify;
+ fmd->media_dev.dev = &pdev->dev;
+
+ v4l2_dev = &fmd->v4l2_dev;
+ v4l2_dev->mdev = &fmd->media_dev;
+ v4l2_dev->notify = fimc_sensor_notify;
+ snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "%s",
+ dev_name(&pdev->dev));
+
+ ret = v4l2_device_register(&pdev->dev, &fmd->v4l2_dev);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
+ goto err1;
+ }
+ ret = media_device_register(&fmd->media_dev);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret);
+ goto err2;
+ }
+ ret = fimc_md_get_clocks(fmd);
+ if (ret)
+ goto err3;
+
+ fmd->user_subdev_api = false;
+ ret = fimc_md_register_platform_entities(fmd);
+ if (ret)
+ goto err3;
+
+ ret = fimc_md_register_sensor_entities(fmd);
+ if (ret)
+ goto err3;
+ ret = fimc_md_create_links(fmd);
+ if (ret)
+ goto err3;
+ ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
+ if (ret)
+ goto err3;
+ ret = fimc_md_register_video_nodes(fmd);
+ if (ret)
+ goto err3;
+
+ ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode);
+ if (!ret) {
+ platform_set_drvdata(pdev, fmd);
+ return 0;
+ }
+err3:
+ media_device_unregister(&fmd->media_dev);
+ fimc_md_put_clocks(fmd);
+ fimc_md_unregister_entities(fmd);
+err2:
+ v4l2_device_unregister(&fmd->v4l2_dev);
+err1:
+ kfree(fmd);
+ return ret;
+}
+
+static int __devexit fimc_md_remove(struct platform_device *pdev)
+{
+ struct fimc_md *fmd = platform_get_drvdata(pdev);
+
+ if (!fmd)
+ return 0;
+ device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode);
+ fimc_md_unregister_entities(fmd);
+ media_device_unregister(&fmd->media_dev);
+ fimc_md_put_clocks(fmd);
+ kfree(fmd);
+ return 0;
+}
+
+static struct platform_driver fimc_md_driver = {
+ .probe = fimc_md_probe,
+ .remove = __devexit_p(fimc_md_remove),
+ .driver = {
+ .name = "s5p-fimc-md",
+ .owner = THIS_MODULE,
+ }
+};
+
+int __init fimc_md_init(void)
+{
+ int ret;
+ request_module("s5p-csis");
+ ret = fimc_register_driver();
+ if (ret)
+ return ret;
+ return platform_driver_register(&fimc_md_driver);
+}
+void __exit fimc_md_exit(void)
+{
+ platform_driver_unregister(&fimc_md_driver);
+ fimc_unregister_driver();
+}
+
+module_init(fimc_md_init);
+module_exit(fimc_md_exit);
+
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_DESCRIPTION("S5P FIMC camera host interface/video postprocessor driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("2.0.1");
diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.h b/drivers/media/video/s5p-fimc/fimc-mdevice.h
new file mode 100644
index 0000000..da37808
--- /dev/null
+++ b/drivers/media/video/s5p-fimc/fimc-mdevice.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef FIMC_MDEVICE_H_
+#define FIMC_MDEVICE_H_
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "fimc-core.h"
+#include "mipi-csis.h"
+
+/* Group IDs of sensor, MIPI CSIS and the writeback subdevs. */
+#define SENSOR_GROUP_ID (1 << 8)
+#define CSIS_GROUP_ID (1 << 9)
+#define WRITEBACK_GROUP_ID (1 << 10)
+
+#define FIMC_MAX_SENSORS 8
+#define FIMC_MAX_CAMCLKS 2
+
+struct fimc_csis_info {
+ struct v4l2_subdev *sd;
+ int id;
+};
+
+struct fimc_camclk_info {
+ struct clk *clock;
+ int use_count;
+ unsigned long frequency;
+};
+
+/**
+ * struct fimc_sensor_info - image data source subdev information
+ * @pdata: sensor's atrributes passed as media device's platform data
+ * @subdev: image sensor v4l2 subdev
+ * @host: fimc device the sensor is currently linked to
+ * @clk_on: sclk_cam clock's state associated with this subdev
+ *
+ * This data structure applies to image sensor and the writeback subdevs.
+ */
+struct fimc_sensor_info {
+ struct s5p_fimc_isp_info *pdata;
+ struct v4l2_subdev *subdev;
+ struct fimc_dev *host;
+ bool clk_on;
+};
+
+/**
+ * struct fimc_md - fimc media device information
+ * @csis: MIPI CSIS subdevs data
+ * @sensor: array of registered sensor subdevs
+ * @num_sensors: actual number of registered sensors
+ * @camclk: external sensor clock information
+ * @fimc: array of registered fimc devices
+ * @media_dev: top level media device
+ * @v4l2_dev: top level v4l2_device holding up the subdevs
+ * @pdev: platform device this media device is hooked up into
+ * @user_subdev_api: true if subdevs are not configured by the host driver
+ * @slock: spinlock protecting @sensor array
+ */
+struct fimc_md {
+ struct fimc_csis_info csis[CSIS_MAX_ENTITIES];
+ struct fimc_sensor_info sensor[FIMC_MAX_SENSORS];
+ int num_sensors;
+ struct fimc_camclk_info camclk[FIMC_MAX_CAMCLKS];
+ struct fimc_dev *fimc[FIMC_MAX_DEVS];
+ struct media_device media_dev;
+ struct v4l2_device v4l2_dev;
+ struct platform_device *pdev;
+ bool user_subdev_api;
+ spinlock_t slock;
+};
+
+#define is_subdev_pad(pad) (pad == NULL || \
+ media_entity_type(pad->entity) == MEDIA_ENT_T_V4L2_SUBDEV)
+
+#define me_subtype(me) \
+ ((me->type) & (MEDIA_ENT_TYPE_MASK | MEDIA_ENT_SUBTYPE_MASK))
+
+#define subdev_has_devnode(__sd) (__sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE)
+
+static inline struct fimc_md *entity_to_fimc_mdev(struct media_entity *me)
+{
+ return me->parent == NULL ? NULL :
+ container_of(me->parent, struct fimc_md, media_dev);
+}
+
+static inline void fimc_md_graph_lock(struct fimc_dev *fimc)
+{
+ BUG_ON(fimc->vid_cap.vfd == NULL);
+ mutex_lock(&fimc->vid_cap.vfd->entity.parent->graph_mutex);
+}
+
+static inline void fimc_md_graph_unlock(struct fimc_dev *fimc)
+{
+ BUG_ON(fimc->vid_cap.vfd == NULL);
+ mutex_unlock(&fimc->vid_cap.vfd->entity.parent->graph_mutex);
+}
+
+int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on);
+void fimc_pipeline_prepare(struct fimc_dev *fimc, struct media_entity *me);
+int fimc_pipeline_initialize(struct fimc_dev *fimc, struct media_entity *me,
+ bool resume);
+int fimc_pipeline_shutdown(struct fimc_dev *fimc);
+int fimc_pipeline_s_power(struct fimc_dev *fimc, int state);
+int fimc_pipeline_s_stream(struct fimc_dev *fimc, int state);
+
+#endif
diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c
index 4893b2d..20e664e 100644
--- a/drivers/media/video/s5p-fimc/fimc-reg.c
+++ b/drivers/media/video/s5p-fimc/fimc-reg.c
@@ -30,7 +30,7 @@
cfg = readl(dev->regs + S5P_CIGCTRL);
cfg |= (S5P_CIGCTRL_SWRST | S5P_CIGCTRL_IRQ_LEVEL);
writel(cfg, dev->regs + S5P_CIGCTRL);
- udelay(1000);
+ udelay(10);
cfg = readl(dev->regs + S5P_CIGCTRL);
cfg &= ~S5P_CIGCTRL_SWRST;
@@ -41,19 +41,11 @@
{
u32 flip = S5P_MSCTRL_FLIP_NORMAL;
- switch (ctx->flip) {
- case FLIP_X_AXIS:
+ if (ctx->hflip)
flip = S5P_MSCTRL_FLIP_X_MIRROR;
- break;
- case FLIP_Y_AXIS:
+ if (ctx->vflip)
flip = S5P_MSCTRL_FLIP_Y_MIRROR;
- break;
- case FLIP_XY_AXIS:
- flip = S5P_MSCTRL_FLIP_180;
- break;
- default:
- break;
- }
+
if (ctx->rotation <= 90)
return flip;
@@ -64,19 +56,11 @@
{
u32 flip = S5P_CITRGFMT_FLIP_NORMAL;
- switch (ctx->flip) {
- case FLIP_X_AXIS:
- flip = S5P_CITRGFMT_FLIP_X_MIRROR;
- break;
- case FLIP_Y_AXIS:
- flip = S5P_CITRGFMT_FLIP_Y_MIRROR;
- break;
- case FLIP_XY_AXIS:
- flip = S5P_CITRGFMT_FLIP_180;
- break;
- default:
- break;
- }
+ if (ctx->hflip)
+ flip |= S5P_CITRGFMT_FLIP_X_MIRROR;
+ if (ctx->vflip)
+ flip |= S5P_CITRGFMT_FLIP_Y_MIRROR;
+
if (ctx->rotation <= 90)
return flip;
@@ -368,17 +352,19 @@
writel(cfg | S5P_CIIMGCPT_IMGCPTEN, dev->regs + S5P_CIIMGCPT);
}
-void fimc_hw_set_effect(struct fimc_ctx *ctx)
+void fimc_hw_set_effect(struct fimc_ctx *ctx, bool active)
{
struct fimc_dev *dev = ctx->fimc_dev;
struct fimc_effect *effect = &ctx->effect;
- u32 cfg = (S5P_CIIMGEFF_IE_ENABLE | S5P_CIIMGEFF_IE_SC_AFTER);
+ u32 cfg = 0;
- cfg |= effect->type;
-
- if (effect->type == S5P_FIMC_EFFECT_ARBITRARY) {
- cfg |= S5P_CIIMGEFF_PAT_CB(effect->pat_cb);
- cfg |= S5P_CIIMGEFF_PAT_CR(effect->pat_cr);
+ if (active) {
+ cfg |= S5P_CIIMGEFF_IE_SC_AFTER | S5P_CIIMGEFF_IE_ENABLE;
+ cfg |= effect->type;
+ if (effect->type == S5P_FIMC_EFFECT_ARBITRARY) {
+ cfg |= S5P_CIIMGEFF_PAT_CB(effect->pat_cb);
+ cfg |= S5P_CIIMGEFF_PAT_CR(effect->pat_cr);
+ }
}
writel(cfg, dev->regs + S5P_CIIMGEFF);
@@ -547,20 +533,24 @@
u32 cfg = readl(fimc->regs + S5P_CIGCTRL);
cfg &= ~(S5P_CIGCTRL_INVPOLPCLK | S5P_CIGCTRL_INVPOLVSYNC |
- S5P_CIGCTRL_INVPOLHREF | S5P_CIGCTRL_INVPOLHSYNC);
+ S5P_CIGCTRL_INVPOLHREF | S5P_CIGCTRL_INVPOLHSYNC |
+ S5P_CIGCTRL_INVPOLFIELD);
- if (cam->flags & FIMC_CLK_INV_PCLK)
+ if (cam->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
cfg |= S5P_CIGCTRL_INVPOLPCLK;
- if (cam->flags & FIMC_CLK_INV_VSYNC)
+ if (cam->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
cfg |= S5P_CIGCTRL_INVPOLVSYNC;
- if (cam->flags & FIMC_CLK_INV_HREF)
+ if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg |= S5P_CIGCTRL_INVPOLHREF;
- if (cam->flags & FIMC_CLK_INV_HSYNC)
+ if (cam->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg |= S5P_CIGCTRL_INVPOLHSYNC;
+ if (cam->flags & V4L2_MBUS_FIELD_EVEN_LOW)
+ cfg |= S5P_CIGCTRL_INVPOLFIELD;
+
writel(cfg, fimc->regs + S5P_CIGCTRL);
return 0;
@@ -588,7 +578,7 @@
if (cam->bus_type == FIMC_ITU_601 || cam->bus_type == FIMC_ITU_656) {
for (i = 0; i < ARRAY_SIZE(pix_desc); i++) {
- if (fimc->vid_cap.fmt.code == pix_desc[i].pixelcode) {
+ if (fimc->vid_cap.mf.code == pix_desc[i].pixelcode) {
cfg = pix_desc[i].cisrcfmt;
bus_width = pix_desc[i].bus_width;
break;
@@ -596,9 +586,9 @@
}
if (i == ARRAY_SIZE(pix_desc)) {
- v4l2_err(&fimc->vid_cap.v4l2_dev,
+ v4l2_err(fimc->vid_cap.vfd,
"Camera color format not supported: %d\n",
- fimc->vid_cap.fmt.code);
+ fimc->vid_cap.mf.code);
return -EINVAL;
}
@@ -608,6 +598,9 @@
else if (bus_width == 16)
cfg |= S5P_CISRCFMT_ITU601_16BIT;
} /* else defaults to ITU-R BT.656 8-bit */
+ } else if (cam->bus_type == FIMC_MIPI_CSI2) {
+ if (fimc_fmt_is_jpeg(f->fmt->color))
+ cfg |= S5P_CISRCFMT_ITU601_8BIT;
}
cfg |= S5P_CISRCFMT_HSIZE(f->o_width) | S5P_CISRCFMT_VSIZE(f->o_height);
@@ -649,7 +642,7 @@
/* Select ITU B interface, disable Writeback path and test pattern. */
cfg &= ~(S5P_CIGCTRL_TESTPAT_MASK | S5P_CIGCTRL_SELCAM_ITU_A |
S5P_CIGCTRL_SELCAM_MIPI | S5P_CIGCTRL_CAMIF_SELWB |
- S5P_CIGCTRL_SELCAM_MIPI_A);
+ S5P_CIGCTRL_SELCAM_MIPI_A | S5P_CIGCTRL_CAM_JPEG);
if (cam->bus_type == FIMC_MIPI_CSI2) {
cfg |= S5P_CIGCTRL_SELCAM_MIPI;
@@ -658,11 +651,18 @@
cfg |= S5P_CIGCTRL_SELCAM_MIPI_A;
/* TODO: add remaining supported formats. */
- if (vid_cap->fmt.code == V4L2_MBUS_FMT_VYUY8_2X8) {
+ switch (vid_cap->mf.code) {
+ case V4L2_MBUS_FMT_VYUY8_2X8:
tmp = S5P_CSIIMGFMT_YCBCR422_8BIT;
- } else {
- err("camera image format not supported: %d",
- vid_cap->fmt.code);
+ break;
+ case V4L2_MBUS_FMT_JPEG_1X8:
+ tmp = S5P_CSIIMGFMT_USER(1);
+ cfg |= S5P_CIGCTRL_CAM_JPEG;
+ break;
+ default:
+ v4l2_err(fimc->vid_cap.vfd,
+ "Not supported camera pixel format: %d",
+ vid_cap->mf.code);
return -EINVAL;
}
tmp |= (cam->csi_data_align == 32) << 8;
diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c b/drivers/media/video/s5p-fimc/mipi-csis.c
index ef056d6..59d79bc 100644
--- a/drivers/media/video/s5p-fimc/mipi-csis.c
+++ b/drivers/media/video/s5p-fimc/mipi-csis.c
@@ -81,6 +81,12 @@
};
#define NUM_CSIS_CLOCKS ARRAY_SIZE(csi_clock_name)
+static const char * const csis_supply_name[] = {
+ "vdd11", /* 1.1V or 1.2V (s5pc100) MIPI CSI suppply */
+ "vdd18", /* VDD 1.8V and MIPI CSI PLL supply */
+};
+#define CSIS_NUM_SUPPLIES ARRAY_SIZE(csis_supply_name)
+
enum {
ST_POWERED = 1,
ST_STREAMING = 2,
@@ -109,9 +115,9 @@
struct platform_device *pdev;
struct resource *regs_res;
void __iomem *regs;
+ struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES];
struct clk *clock[NUM_CSIS_CLOCKS];
int irq;
- struct regulator *supply;
u32 flags;
const struct csis_pix_format *csis_fmt;
struct v4l2_mbus_framefmt format;
@@ -460,6 +466,7 @@
struct resource *regs_res;
struct csis_state *state;
int ret = -ENOMEM;
+ int i;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
@@ -519,14 +526,13 @@
goto e_clkput;
}
- if (!pdata->fixed_phy_vdd) {
- state->supply = regulator_get(&pdev->dev, "vdd");
- if (IS_ERR(state->supply)) {
- ret = PTR_ERR(state->supply);
- state->supply = NULL;
- goto e_clkput;
- }
- }
+ for (i = 0; i < CSIS_NUM_SUPPLIES; i++)
+ state->supplies[i].supply = csis_supply_name[i];
+
+ ret = regulator_bulk_get(&pdev->dev, CSIS_NUM_SUPPLIES,
+ state->supplies);
+ if (ret)
+ goto e_clkput;
ret = request_irq(state->irq, s5pcsis_irq_handler, 0,
dev_name(&pdev->dev), state);
@@ -553,7 +559,6 @@
/* .. and a pointer to the subdev. */
platform_set_drvdata(pdev, &state->sd);
- state->flags = ST_SUSPENDED;
pm_runtime_enable(&pdev->dev);
return 0;
@@ -561,8 +566,7 @@
e_irqfree:
free_irq(state->irq, state);
e_regput:
- if (state->supply)
- regulator_put(state->supply);
+ regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supplies);
e_clkput:
clk_disable(state->clock[CSIS_CLK_MUX]);
s5pcsis_clk_put(state);
@@ -575,7 +579,7 @@
return ret;
}
-static int s5pcsis_suspend(struct device *dev)
+static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
{
struct s5p_platform_mipi_csis *pdata = dev->platform_data;
struct platform_device *pdev = to_platform_device(dev);
@@ -592,21 +596,21 @@
ret = pdata->phy_enable(state->pdev, false);
if (ret)
goto unlock;
- if (state->supply) {
- ret = regulator_disable(state->supply);
- if (ret)
- goto unlock;
- }
+ ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
+ state->supplies);
+ if (ret)
+ goto unlock;
clk_disable(state->clock[CSIS_CLK_GATE]);
state->flags &= ~ST_POWERED;
+ if (!runtime)
+ state->flags |= ST_SUSPENDED;
}
- state->flags |= ST_SUSPENDED;
unlock:
mutex_unlock(&state->lock);
return ret ? -EAGAIN : 0;
}
-static int s5pcsis_resume(struct device *dev)
+static int s5pcsis_pm_resume(struct device *dev, bool runtime)
{
struct s5p_platform_mipi_csis *pdata = dev->platform_data;
struct platform_device *pdev = to_platform_device(dev);
@@ -618,20 +622,20 @@
__func__, state->flags);
mutex_lock(&state->lock);
- if (!(state->flags & ST_SUSPENDED))
+ if (!runtime && !(state->flags & ST_SUSPENDED))
goto unlock;
if (!(state->flags & ST_POWERED)) {
- if (state->supply)
- ret = regulator_enable(state->supply);
+ ret = regulator_bulk_enable(CSIS_NUM_SUPPLIES,
+ state->supplies);
if (ret)
goto unlock;
-
ret = pdata->phy_enable(state->pdev, true);
if (!ret) {
state->flags |= ST_POWERED;
- } else if (state->supply) {
- regulator_disable(state->supply);
+ } else {
+ regulator_bulk_disable(CSIS_NUM_SUPPLIES,
+ state->supplies);
goto unlock;
}
clk_enable(state->clock[CSIS_CLK_GATE]);
@@ -646,24 +650,26 @@
}
#ifdef CONFIG_PM_SLEEP
-static int s5pcsis_pm_suspend(struct device *dev)
+static int s5pcsis_suspend(struct device *dev)
{
- return s5pcsis_suspend(dev);
+ return s5pcsis_pm_suspend(dev, false);
}
-static int s5pcsis_pm_resume(struct device *dev)
+static int s5pcsis_resume(struct device *dev)
{
- int ret;
+ return s5pcsis_pm_resume(dev, false);
+}
+#endif
- ret = s5pcsis_resume(dev);
+#ifdef CONFIG_PM_RUNTIME
+static int s5pcsis_runtime_suspend(struct device *dev)
+{
+ return s5pcsis_pm_suspend(dev, true);
+}
- if (!ret) {
- pm_runtime_disable(dev);
- ret = pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- }
-
- return ret;
+static int s5pcsis_runtime_resume(struct device *dev)
+{
+ return s5pcsis_pm_resume(dev, true);
}
#endif
@@ -679,8 +685,7 @@
pm_runtime_set_suspended(&pdev->dev);
s5pcsis_clk_put(state);
- if (state->supply)
- regulator_put(state->supply);
+ regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supplies);
media_entity_cleanup(&state->sd.entity);
free_irq(state->irq, state);
@@ -692,8 +697,9 @@
}
static const struct dev_pm_ops s5pcsis_pm_ops = {
- SET_RUNTIME_PM_OPS(s5pcsis_suspend, s5pcsis_resume, NULL)
- SET_SYSTEM_SLEEP_PM_OPS(s5pcsis_pm_suspend, s5pcsis_pm_resume)
+ SET_RUNTIME_PM_OPS(s5pcsis_runtime_suspend, s5pcsis_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(s5pcsis_suspend, s5pcsis_resume)
};
static struct platform_driver s5pcsis_driver = {
diff --git a/drivers/media/video/s5p-fimc/regs-fimc.h b/drivers/media/video/s5p-fimc/regs-fimc.h
index 0fea3e6..c8e3b94 100644
--- a/drivers/media/video/s5p-fimc/regs-fimc.h
+++ b/drivers/media/video/s5p-fimc/regs-fimc.h
@@ -54,12 +54,14 @@
#define S5P_CIGCTRL_IRQ_CLR (1 << 19)
#define S5P_CIGCTRL_IRQ_ENABLE (1 << 16)
#define S5P_CIGCTRL_SHDW_DISABLE (1 << 12)
+#define S5P_CIGCTRL_CAM_JPEG (1 << 8)
#define S5P_CIGCTRL_SELCAM_MIPI_A (1 << 7)
#define S5P_CIGCTRL_CAMIF_SELWB (1 << 6)
/* 0 - ITU601; 1 - ITU709 */
#define S5P_CIGCTRL_CSC_ITU601_709 (1 << 5)
#define S5P_CIGCTRL_INVPOLHSYNC (1 << 4)
#define S5P_CIGCTRL_SELCAM_MIPI (1 << 3)
+#define S5P_CIGCTRL_INVPOLFIELD (1 << 1)
#define S5P_CIGCTRL_INTERLACE (1 << 0)
/* Window offset 2 */
@@ -184,7 +186,6 @@
/* Image effect */
#define S5P_CIIMGEFF 0xd0
-#define S5P_CIIMGEFF_IE_DISABLE (0 << 30)
#define S5P_CIIMGEFF_IE_ENABLE (1 << 30)
#define S5P_CIIMGEFF_IE_SC_BEFORE (0 << 29)
#define S5P_CIIMGEFF_IE_SC_AFTER (1 << 29)
@@ -286,10 +287,8 @@
#define S5P_CSIIMGFMT_RAW8 0x2a
#define S5P_CSIIMGFMT_RAW10 0x2b
#define S5P_CSIIMGFMT_RAW12 0x2c
-#define S5P_CSIIMGFMT_USER1 0x30
-#define S5P_CSIIMGFMT_USER2 0x31
-#define S5P_CSIIMGFMT_USER3 0x32
-#define S5P_CSIIMGFMT_USER4 0x33
+/* User defined formats. x = 0...16. */
+#define S5P_CSIIMGFMT_USER(x) (0x30 + x - 1)
/* Output frame buffer sequence mask */
#define S5P_CIFCNTSEQ 0x1FC
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc.c b/drivers/media/video/s5p-mfc/s5p_mfc.c
index 7dc7eab..8be8b54 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc.c
@@ -202,7 +202,7 @@
appropraite flags */
src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
- if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dec_y_addr) {
+ if (vb2_dma_contig_plane_dma_addr(dst_buf->b, 0) == dec_y_addr) {
memcpy(&dst_buf->b->v4l2_buf.timecode,
&src_buf->b->v4l2_buf.timecode,
sizeof(struct v4l2_timecode));
@@ -248,7 +248,7 @@
* check which videobuf does it correspond to */
list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
/* Check if this is the buffer we're looking for */
- if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dspl_y_addr) {
+ if (vb2_dma_contig_plane_dma_addr(dst_buf->b, 0) == dspl_y_addr) {
list_del(&dst_buf->list);
ctx->dst_queue_cnt--;
dst_buf->b->v4l2_buf.sequence = ctx->sequence;
@@ -940,9 +940,8 @@
return !strcmp(dev_name(dev), (char *)data);
}
-
/* MFC probe function */
-static int __devinit s5p_mfc_probe(struct platform_device *pdev)
+static int s5p_mfc_probe(struct platform_device *pdev)
{
struct s5p_mfc_dev *dev;
struct video_device *vfd;
@@ -1236,7 +1235,7 @@
NULL)
};
-static struct platform_driver s5p_mfc_pdrv = {
+static struct platform_driver s5p_mfc_driver = {
.probe = s5p_mfc_probe,
.remove = __devexit_p(s5p_mfc_remove),
.driver = {
@@ -1254,15 +1253,15 @@
int ret;
pr_info("%s", banner);
- ret = platform_driver_register(&s5p_mfc_pdrv);
+ ret = platform_driver_register(&s5p_mfc_driver);
if (ret)
pr_err("Platform device registration failed.\n");
return ret;
}
-static void __devexit s5p_mfc_exit(void)
+static void __exit s5p_mfc_exit(void)
{
- platform_driver_unregister(&s5p_mfc_pdrv);
+ platform_driver_unregister(&s5p_mfc_driver);
}
module_init(s5p_mfc_init);
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
index b2c5052..bfbe084 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -165,7 +165,7 @@
.maximum = 32,
.step = 1,
.default_value = 1,
- .is_volatile = 1,
+ .flags = V4L2_CTRL_FLAG_VOLATILE,
},
};
@@ -745,7 +745,7 @@
};
static int s5p_mfc_queue_setup(struct vb2_queue *vq, unsigned int *buf_count,
- unsigned int *plane_count, unsigned long psize[],
+ unsigned int *plane_count, unsigned int psize[],
void *allocators[])
{
struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
@@ -824,7 +824,7 @@
return 0;
for (i = 0; i <= ctx->src_fmt->num_planes ; i++) {
if (IS_ERR_OR_NULL(ERR_PTR(
- vb2_dma_contig_plane_paddr(vb, i)))) {
+ vb2_dma_contig_plane_dma_addr(vb, i)))) {
mfc_err("Plane mem not allocated\n");
return -EINVAL;
}
@@ -837,13 +837,13 @@
i = vb->v4l2_buf.index;
ctx->dst_bufs[i].b = vb;
ctx->dst_bufs[i].cookie.raw.luma =
- vb2_dma_contig_plane_paddr(vb, 0);
+ vb2_dma_contig_plane_dma_addr(vb, 0);
ctx->dst_bufs[i].cookie.raw.chroma =
- vb2_dma_contig_plane_paddr(vb, 1);
+ vb2_dma_contig_plane_dma_addr(vb, 1);
ctx->dst_bufs_cnt++;
} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
if (IS_ERR_OR_NULL(ERR_PTR(
- vb2_dma_contig_plane_paddr(vb, 0)))) {
+ vb2_dma_contig_plane_dma_addr(vb, 0)))) {
mfc_err("Plane memory not allocated\n");
return -EINVAL;
}
@@ -855,7 +855,7 @@
i = vb->v4l2_buf.index;
ctx->src_bufs[i].b = vb;
ctx->src_bufs[i].cookie.stream =
- vb2_dma_contig_plane_paddr(vb, 0);
+ vb2_dma_contig_plane_dma_addr(vb, 0);
ctx->src_bufs_cnt++;
} else {
mfc_err("s5p_mfc_buf_init: unknown queue type\n");
@@ -864,7 +864,7 @@
return 0;
}
-static int s5p_mfc_start_streaming(struct vb2_queue *q)
+static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count)
{
struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
struct s5p_mfc_dev *dev = ctx->dev;
@@ -1020,7 +1020,7 @@
return ctx->ctrl_handler.error;
}
if (controls[i].is_volatile && ctx->ctrls[i])
- ctx->ctrls[i]->is_volatile = 1;
+ ctx->ctrls[i]->flags |= V4L2_CTRL_FLAG_VOLATILE;
}
return 0;
}
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
index fee094a..4c90e53 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -599,8 +599,8 @@
while (!list_empty(&ctx->ref_queue)) {
mb_entry = list_entry((&ctx->ref_queue)->next,
struct s5p_mfc_buf, list);
- mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
- mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+ mb_y_addr = vb2_dma_contig_plane_dma_addr(mb_entry->b, 0);
+ mb_c_addr = vb2_dma_contig_plane_dma_addr(mb_entry->b, 1);
list_del(&mb_entry->list);
ctx->ref_queue_cnt--;
list_add_tail(&mb_entry->list, &ctx->src_queue);
@@ -622,7 +622,7 @@
spin_lock_irqsave(&dev->irqlock, flags);
dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
- dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+ dst_addr = vb2_dma_contig_plane_dma_addr(dst_mb->b, 0);
dst_size = vb2_plane_size(dst_mb->b, 0);
s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
spin_unlock_irqrestore(&dev->irqlock, flags);
@@ -668,14 +668,14 @@
spin_lock_irqsave(&dev->irqlock, flags);
src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
- src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0);
- src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1);
+ src_y_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 0);
+ src_c_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 1);
s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr);
spin_unlock_irqrestore(&dev->irqlock, flags);
spin_lock_irqsave(&dev->irqlock, flags);
dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
- dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+ dst_addr = vb2_dma_contig_plane_dma_addr(dst_mb->b, 0);
dst_size = vb2_plane_size(dst_mb->b, 0);
s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
spin_unlock_irqrestore(&dev->irqlock, flags);
@@ -703,8 +703,8 @@
if (slice_type >= 0) {
s5p_mfc_get_enc_frame_buffer(ctx, &enc_y_addr, &enc_c_addr);
list_for_each_entry(mb_entry, &ctx->src_queue, list) {
- mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
- mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+ mb_y_addr = vb2_dma_contig_plane_dma_addr(mb_entry->b, 0);
+ mb_c_addr = vb2_dma_contig_plane_dma_addr(mb_entry->b, 1);
if ((enc_y_addr == mb_y_addr) &&
(enc_c_addr == mb_c_addr)) {
list_del(&mb_entry->list);
@@ -715,8 +715,8 @@
}
}
list_for_each_entry(mb_entry, &ctx->ref_queue, list) {
- mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
- mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+ mb_y_addr = vb2_dma_contig_plane_dma_addr(mb_entry->b, 0);
+ mb_c_addr = vb2_dma_contig_plane_dma_addr(mb_entry->b, 1);
if ((enc_y_addr == mb_y_addr) &&
(enc_c_addr == mb_c_addr)) {
list_del(&mb_entry->list);
@@ -1501,20 +1501,20 @@
return -EINVAL;
}
for (i = 0; i < fmt->num_planes; i++) {
- if (!vb2_dma_contig_plane_paddr(vb, i)) {
+ if (!vb2_dma_contig_plane_dma_addr(vb, i)) {
mfc_err("failed to get plane cookie\n");
return -EINVAL;
}
mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx",
vb->v4l2_buf.index, i,
- vb2_dma_contig_plane_paddr(vb, i));
+ vb2_dma_contig_plane_dma_addr(vb, i));
}
return 0;
}
static int s5p_mfc_queue_setup(struct vb2_queue *vq,
unsigned int *buf_count, unsigned int *plane_count,
- unsigned long psize[], void *allocators[])
+ unsigned int psize[], void *allocators[])
{
struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
@@ -1584,7 +1584,7 @@
i = vb->v4l2_buf.index;
ctx->dst_bufs[i].b = vb;
ctx->dst_bufs[i].cookie.stream =
- vb2_dma_contig_plane_paddr(vb, 0);
+ vb2_dma_contig_plane_dma_addr(vb, 0);
ctx->dst_bufs_cnt++;
} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
ret = check_vb_with_fmt(ctx->src_fmt, vb);
@@ -1593,9 +1593,9 @@
i = vb->v4l2_buf.index;
ctx->src_bufs[i].b = vb;
ctx->src_bufs[i].cookie.raw.luma =
- vb2_dma_contig_plane_paddr(vb, 0);
+ vb2_dma_contig_plane_dma_addr(vb, 0);
ctx->src_bufs[i].cookie.raw.chroma =
- vb2_dma_contig_plane_paddr(vb, 1);
+ vb2_dma_contig_plane_dma_addr(vb, 1);
ctx->src_bufs_cnt++;
} else {
mfc_err("inavlid queue type: %d\n", vq->type);
@@ -1640,7 +1640,7 @@
return 0;
}
-static int s5p_mfc_start_streaming(struct vb2_queue *q)
+static int s5p_mfc_start_streaming(struct vb2_queue *q, unsigned int count)
{
struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
struct s5p_mfc_dev *dev = ctx->dev;
@@ -1814,7 +1814,7 @@
return ctx->ctrl_handler.error;
}
if (controls[i].is_volatile && ctx->ctrls[i])
- ctx->ctrls[i]->is_volatile = 1;
+ ctx->ctrls[i]->flags |= V4L2_CTRL_FLAG_VOLATILE;
}
return 0;
}
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.c b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c
index 7b23916..e08b21c 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_opr.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c
@@ -1135,7 +1135,7 @@
temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
temp_vb->used = 1;
s5p_mfc_set_dec_stream_buffer(ctx,
- vb2_dma_contig_plane_paddr(temp_vb->b, 0), ctx->consumed_stream,
+ vb2_dma_contig_plane_dma_addr(temp_vb->b, 0), ctx->consumed_stream,
temp_vb->b->v4l2_planes[0].bytesused);
spin_unlock_irqrestore(&dev->irqlock, flags);
index = temp_vb->b->v4l2_buf.index;
@@ -1172,12 +1172,12 @@
}
src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
src_mb->used = 1;
- src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0);
- src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1);
+ src_y_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 0);
+ src_c_addr = vb2_dma_contig_plane_dma_addr(src_mb->b, 1);
s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr);
dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
dst_mb->used = 1;
- dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+ dst_addr = vb2_dma_contig_plane_dma_addr(dst_mb->b, 0);
dst_size = vb2_plane_size(dst_mb->b, 0);
s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
spin_unlock_irqrestore(&dev->irqlock, flags);
@@ -1200,7 +1200,7 @@
s5p_mfc_set_dec_desc_buffer(ctx);
mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused);
s5p_mfc_set_dec_stream_buffer(ctx,
- vb2_dma_contig_plane_paddr(temp_vb->b, 0),
+ vb2_dma_contig_plane_dma_addr(temp_vb->b, 0),
0, temp_vb->b->v4l2_planes[0].bytesused);
spin_unlock_irqrestore(&dev->irqlock, flags);
dev->curr_ctx = ctx->num;
@@ -1219,7 +1219,7 @@
s5p_mfc_set_enc_ref_buffer(ctx);
spin_lock_irqsave(&dev->irqlock, flags);
dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
- dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+ dst_addr = vb2_dma_contig_plane_dma_addr(dst_mb->b, 0);
dst_size = vb2_plane_size(dst_mb->b, 0);
s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
spin_unlock_irqrestore(&dev->irqlock, flags);
@@ -1255,7 +1255,7 @@
temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused);
s5p_mfc_set_dec_stream_buffer(ctx,
- vb2_dma_contig_plane_paddr(temp_vb->b, 0),
+ vb2_dma_contig_plane_dma_addr(temp_vb->b, 0),
0, temp_vb->b->v4l2_planes[0].bytesused);
spin_unlock_irqrestore(&dev->irqlock, flags);
dev->curr_ctx = ctx->num;
diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/video/s5p-tv/Kconfig
index 9c37dee..f2a0977 100644
--- a/drivers/media/video/s5p-tv/Kconfig
+++ b/drivers/media/video/s5p-tv/Kconfig
@@ -8,7 +8,7 @@
config VIDEO_SAMSUNG_S5P_TV
bool "Samsung TV driver for S5P platform (experimental)"
- depends on PLAT_S5P
+ depends on PLAT_S5P && PM_RUNTIME
depends on EXPERIMENTAL
default n
---help---
diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/video/s5p-tv/hdmi_drv.c
index 06d6663..0279e6e 100644
--- a/drivers/media/video/s5p-tv/hdmi_drv.c
+++ b/drivers/media/video/s5p-tv/hdmi_drv.c
@@ -210,20 +210,17 @@
/* enable HPD interrupts */
hdmi_write_mask(hdev, HDMI_INTC_CON, ~0, HDMI_INTC_EN_GLOBAL |
HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
- /* choose HDMI mode */
+ /* choose DVI mode */
hdmi_write_mask(hdev, HDMI_MODE_SEL,
- HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
+ HDMI_MODE_DVI_EN, HDMI_MODE_MASK);
+ hdmi_write_mask(hdev, HDMI_CON_2, ~0,
+ HDMI_DVI_PERAMBLE_EN | HDMI_DVI_BAND_EN);
/* disable bluescreen */
hdmi_write_mask(hdev, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
/* choose bluescreen (fecal) color */
hdmi_writeb(hdev, HDMI_BLUE_SCREEN_0, 0x12);
hdmi_writeb(hdev, HDMI_BLUE_SCREEN_1, 0x34);
hdmi_writeb(hdev, HDMI_BLUE_SCREEN_2, 0x56);
- /* enable AVI packet every vsync, fixes purple line problem */
- hdmi_writeb(hdev, HDMI_AVI_CON, 0x02);
- /* force YUV444, look to CEA-861-D, table 7 for more detail */
- hdmi_writeb(hdev, HDMI_AVI_BYTE(0), 2 << 5);
- hdmi_write_mask(hdev, HDMI_CON_1, 2, 3 << 5);
}
static void hdmi_timing_apply(struct hdmi_device *hdev,
@@ -443,6 +440,7 @@
.height = 480,
.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
.field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
},
};
@@ -475,6 +473,7 @@
.height = 720,
.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
.field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
},
};
@@ -507,6 +506,7 @@
.height = 1080,
.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
.field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
},
};
@@ -539,6 +539,7 @@
.height = 1080,
.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
.field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
},
};
diff --git a/drivers/media/video/s5p-tv/mixer.h b/drivers/media/video/s5p-tv/mixer.h
index e224224..51ad59b3 100644
--- a/drivers/media/video/s5p-tv/mixer.h
+++ b/drivers/media/video/s5p-tv/mixer.h
@@ -111,8 +111,6 @@
enum mxr_layer_state {
/** layers is not shown */
MXR_LAYER_IDLE = 0,
- /** state between STREAMON and hardware start */
- MXR_LAYER_STREAMING_START,
/** layer is shown */
MXR_LAYER_STREAMING,
/** state before STREAMOFF is finished */
diff --git a/drivers/media/video/s5p-tv/mixer_grp_layer.c b/drivers/media/video/s5p-tv/mixer_grp_layer.c
index 58f0ba4..de8270c 100644
--- a/drivers/media/video/s5p-tv/mixer_grp_layer.c
+++ b/drivers/media/video/s5p-tv/mixer_grp_layer.c
@@ -86,7 +86,7 @@
dma_addr_t addr = 0;
if (buf)
- addr = vb2_dma_contig_plane_paddr(&buf->vb, 0);
+ addr = vb2_dma_contig_plane_dma_addr(&buf->vb, 0);
mxr_reg_graph_buffer(layer->mdev, layer->idx, addr);
}
diff --git a/drivers/media/video/s5p-tv/mixer_reg.c b/drivers/media/video/s5p-tv/mixer_reg.c
index 38dac67..4800a3c 100644
--- a/drivers/media/video/s5p-tv/mixer_reg.c
+++ b/drivers/media/video/s5p-tv/mixer_reg.c
@@ -90,7 +90,7 @@
mxr_vsync_set_update(mdev, MXR_DISABLE);
/* set output in RGB888 mode */
- mxr_write(mdev, MXR_CFG, MXR_CFG_OUT_YUV444);
+ mxr_write(mdev, MXR_CFG, MXR_CFG_OUT_RGB888);
/* 16 beat burst in DMA */
mxr_write_mask(mdev, MXR_STATUS, MXR_STATUS_16_BURST,
@@ -376,6 +376,12 @@
spin_lock_irqsave(&mdev->reg_slock, flags);
mxr_vsync_set_update(mdev, MXR_DISABLE);
+ /* selecting colorspace accepted by output */
+ if (fmt->colorspace == V4L2_COLORSPACE_JPEG)
+ val |= MXR_CFG_OUT_YUV444;
+ else
+ val |= MXR_CFG_OUT_RGB888;
+
/* choosing between interlace and progressive mode */
if (fmt->field == V4L2_FIELD_INTERLACED)
val |= MXR_CFG_SCAN_INTERLACE;
@@ -394,7 +400,8 @@
else
WARN(1, "unrecognized mbus height %u!\n", fmt->height);
- mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_SCAN_MASK);
+ mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_SCAN_MASK |
+ MXR_CFG_OUT_MASK);
val = (fmt->field == V4L2_FIELD_INTERLACED) ? ~0 : 0;
vp_write_mask(mdev, VP_MODE, val,
diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c
index 43ac22f..4917e2c 100644
--- a/drivers/media/video/s5p-tv/mixer_video.c
+++ b/drivers/media/video/s5p-tv/mixer_video.c
@@ -728,7 +728,7 @@
};
static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned long sizes[],
+ unsigned int *nplanes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct mxr_layer *layer = vb2_get_drv_priv(vq);
@@ -764,19 +764,10 @@
struct mxr_layer *layer = vb2_get_drv_priv(vb->vb2_queue);
struct mxr_device *mdev = layer->mdev;
unsigned long flags;
- int must_start = 0;
spin_lock_irqsave(&layer->enq_slock, flags);
- if (layer->state == MXR_LAYER_STREAMING_START) {
- layer->state = MXR_LAYER_STREAMING;
- must_start = 1;
- }
list_add_tail(&buffer->list, &layer->enq_list);
spin_unlock_irqrestore(&layer->enq_slock, flags);
- if (must_start) {
- layer->ops.stream_set(layer, MXR_ENABLE);
- mxr_streamer_get(mdev);
- }
mxr_dbg(mdev, "queuing buffer\n");
}
@@ -797,13 +788,19 @@
mutex_unlock(&layer->mutex);
}
-static int start_streaming(struct vb2_queue *vq)
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
{
struct mxr_layer *layer = vb2_get_drv_priv(vq);
struct mxr_device *mdev = layer->mdev;
unsigned long flags;
mxr_dbg(mdev, "%s\n", __func__);
+
+ if (count == 0) {
+ mxr_dbg(mdev, "no output buffers queued\n");
+ return -EINVAL;
+ }
+
/* block any changes in output configuration */
mxr_output_get(mdev);
@@ -814,9 +811,12 @@
layer->ops.format_set(layer);
/* enabling layer in hardware */
spin_lock_irqsave(&layer->enq_slock, flags);
- layer->state = MXR_LAYER_STREAMING_START;
+ layer->state = MXR_LAYER_STREAMING;
spin_unlock_irqrestore(&layer->enq_slock, flags);
+ layer->ops.stream_set(layer, MXR_ENABLE);
+ mxr_streamer_get(mdev);
+
return 0;
}
diff --git a/drivers/media/video/s5p-tv/mixer_vp_layer.c b/drivers/media/video/s5p-tv/mixer_vp_layer.c
index 6950ed8..f3bb2e3 100644
--- a/drivers/media/video/s5p-tv/mixer_vp_layer.c
+++ b/drivers/media/video/s5p-tv/mixer_vp_layer.c
@@ -97,9 +97,9 @@
mxr_reg_vp_buffer(layer->mdev, luma_addr, chroma_addr);
return;
}
- luma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 0);
+ luma_addr[0] = vb2_dma_contig_plane_dma_addr(&buf->vb, 0);
if (layer->fmt->num_subframes == 2) {
- chroma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 1);
+ chroma_addr[0] = vb2_dma_contig_plane_dma_addr(&buf->vb, 1);
} else {
/* FIXME: mxr_get_plane_size compute integer division,
* which is slow and should not be performed in interrupt */
diff --git a/drivers/media/video/s5p-tv/regs-hdmi.h b/drivers/media/video/s5p-tv/regs-hdmi.h
index ac93ad6..33247d1 100644
--- a/drivers/media/video/s5p-tv/regs-hdmi.h
+++ b/drivers/media/video/s5p-tv/regs-hdmi.h
@@ -127,6 +127,10 @@
#define HDMI_BLUE_SCR_EN (1 << 5)
#define HDMI_EN (1 << 0)
+/* HDMI_CON_2 */
+#define HDMI_DVI_PERAMBLE_EN (1 << 5)
+#define HDMI_DVI_BAND_EN (1 << 1)
+
/* HDMI_PHY_STATUS */
#define HDMI_PHY_STATUS_READY (1 << 0)
diff --git a/drivers/media/video/s5p-tv/regs-mixer.h b/drivers/media/video/s5p-tv/regs-mixer.h
index 3c84426..158abb4 100644
--- a/drivers/media/video/s5p-tv/regs-mixer.h
+++ b/drivers/media/video/s5p-tv/regs-mixer.h
@@ -67,6 +67,7 @@
/* bits for MXR_CFG */
#define MXR_CFG_OUT_YUV444 (0 << 8)
#define MXR_CFG_OUT_RGB888 (1 << 8)
+#define MXR_CFG_OUT_MASK (1 << 8)
#define MXR_CFG_DST_SDO (0 << 7)
#define MXR_CFG_DST_HDMI (1 << 7)
#define MXR_CFG_DST_MASK (1 << 7)
diff --git a/drivers/media/video/s5p-tv/sdo_drv.c b/drivers/media/video/s5p-tv/sdo_drv.c
index 4dddd6b..8cec67e 100644
--- a/drivers/media/video/s5p-tv/sdo_drv.c
+++ b/drivers/media/video/s5p-tv/sdo_drv.c
@@ -170,6 +170,7 @@
fmt->height = sdev->fmt->height;
fmt->code = V4L2_MBUS_FMT_FIXED;
fmt->field = V4L2_FIELD_INTERLACED;
+ fmt->colorspace = V4L2_COLORSPACE_JPEG;
return 0;
}
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index f2ae405..5cfdbc7 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -793,7 +793,6 @@
saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val);
else
saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80);
- v4l2_ctrl_activate(state->gain, !state->agc->val);
break;
default:
@@ -1345,35 +1344,57 @@
static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
{
struct saa711x_state *state = to_state(sd);
- int reg1e;
+ int reg1f, reg1e;
- *std = V4L2_STD_ALL;
- if (state->ident != V4L2_IDENT_SAA7115) {
- int reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+ /*
+ * The V4L2 core already initializes std with all supported
+ * Standards. All driver needs to do is to mask it, to remove
+ * standards that don't apply from the mask
+ */
- if (reg1f & 0x20)
- *std = V4L2_STD_525_60;
- else
- *std = V4L2_STD_625_50;
+ reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+ v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f);
- return 0;
- }
+ /* horizontal/vertical not locked */
+ if (reg1f & 0x40)
+ goto ret;
+
+ if (reg1f & 0x20)
+ *std &= V4L2_STD_525_60;
+ else
+ *std &= V4L2_STD_625_50;
+
+ if (state->ident != V4L2_IDENT_SAA7115)
+ goto ret;
reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
switch (reg1e & 0x03) {
case 1:
- *std = V4L2_STD_NTSC;
+ *std &= V4L2_STD_NTSC;
break;
case 2:
- *std = V4L2_STD_PAL;
+ /*
+ * V4L2_STD_PAL just cover the european PAL standards.
+ * This is wrong, as the device could also be using an
+ * other PAL standard.
+ */
+ *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc |
+ V4L2_STD_PAL_M | V4L2_STD_PAL_60;
break;
case 3:
- *std = V4L2_STD_SECAM;
+ *std &= V4L2_STD_SECAM;
break;
default:
+ /* Can't detect anything */
break;
}
+
+ v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e);
+
+ret:
+ v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std);
+
return 0;
}
@@ -1601,7 +1622,6 @@
V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40);
- state->gain->is_volatile = 1;
sd->ctrl_handler = hdl;
if (hdl->error) {
int err = hdl->error;
@@ -1610,8 +1630,7 @@
kfree(state);
return err;
}
- state->agc->flags |= V4L2_CTRL_FLAG_UPDATE;
- v4l2_ctrl_cluster(2, &state->agc);
+ v4l2_ctrl_auto_cluster(2, &state->agc, 0, true);
state->input = -1;
state->output = SAA7115_IPORT_ON;
diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile
index 8a5ff4d..a646ccf 100644
--- a/drivers/media/video/saa7134/Makefile
+++ b/drivers/media/video/saa7134/Makefile
@@ -10,7 +10,7 @@
obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/video/saa7164/Makefile b/drivers/media/video/saa7164/Makefile
index 6303a8e..ecd5811 100644
--- a/drivers/media/video/saa7164/Makefile
+++ b/drivers/media/video/saa7164/Makefile
@@ -4,9 +4,9 @@
obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
-EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 69822a4..971591d 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -203,6 +203,66 @@
.i2c_reg_len = REGLEN_8bit,
} },
},
+ [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+ .name = "Hauppauge WinTV-HVR2200",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .portc = SAA7164_MPEG_ENCODER,
+ .portd = SAA7164_MPEG_ENCODER,
+ .porte = SAA7164_MPEG_VBI,
+ .portf = SAA7164_MPEG_VBI,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x1d,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x05,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1b,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1c,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1e,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x10 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1f,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x12 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ } },
+ },
[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
.name = "Hauppauge WinTV-HVR2250",
.porta = SAA7164_MPEG_DVB,
@@ -387,6 +447,62 @@
.i2c_reg_len = REGLEN_8bit,
} },
},
+ [SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = {
+ .name = "Hauppauge WinTV-HVR2200",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x23,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x05,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x21,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x22,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x24,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x10 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x25,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x12 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ } },
+ },
};
const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
@@ -426,6 +542,14 @@
.subvendor = 0x0070,
.subdevice = 0x8851,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x8940,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x8953,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
},
};
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -469,6 +593,8 @@
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -549,6 +675,8 @@
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index f65eab6..5c5cc3e 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -475,6 +475,8 @@
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
i2c_bus = &dev->i2c_bus[port->nr + 1];
switch (port->nr) {
case 0:
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 6678bf1..742b341 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -82,6 +82,8 @@
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_5 10
#define SAA7164_MAX_UNITS 8
#define SAA7164_TS_NUMBER_OF_LINES 312
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index e540898..8615fb8 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -218,7 +218,7 @@
*/
static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
unsigned int *count, unsigned int *num_planes,
- unsigned long sizes[], void *alloc_ctxs[])
+ unsigned int sizes[], void *alloc_ctxs[])
{
struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
@@ -243,7 +243,7 @@
*count = pcdev->video_limit / PAGE_ALIGN(sizes[0]);
}
- dev_dbg(icd->parent, "count=%d, size=%lu\n", *count, sizes[0]);
+ dev_dbg(icd->parent, "count=%d, size=%u\n", *count, sizes[0]);
return 0;
}
@@ -312,7 +312,7 @@
bottom2 = CDBCR;
}
- phys_addr_top = vb2_dma_contig_plane_paddr(pcdev->active, 0);
+ phys_addr_top = vb2_dma_contig_plane_dma_addr(pcdev->active, 0);
ceu_write(pcdev, top1, phys_addr_top);
if (V4L2_FIELD_NONE != pcdev->field) {
diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c
index 8afb0e8..10aff3f 100644
--- a/drivers/media/video/sr030pc30.c
+++ b/drivers/media/video/sr030pc30.c
@@ -714,11 +714,6 @@
return ret;
}
-static int sr030pc30_s_stream(struct v4l2_subdev *sd, int enable)
-{
- return 0;
-}
-
static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -764,7 +759,6 @@
};
static const struct v4l2_subdev_video_ops sr030pc30_video_ops = {
- .s_stream = sr030pc30_s_stream,
.g_mbus_fmt = sr030pc30_g_fmt,
.s_mbus_fmt = sr030pc30_s_fmt,
.try_mbus_fmt = sr030pc30_try_fmt,
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index d1a2cef..cbc105f 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -55,6 +55,8 @@
MODULE_DESCRIPTION("Syntek DC1125 webcam driver");
+/* bool for webcam LED management */
+int first_init = 1;
/* Some cameras have audio interfaces, we aren't interested in those */
static struct usb_device_id stkwebcam_table[] = {
@@ -518,7 +520,7 @@
return -ENOMEM;
for (i = 0; i < n_sbufs; i++) {
if (stk_setup_siobuf(dev, i))
- return (dev->n_sbufs > 1)? 0 : -ENOMEM;
+ return (dev->n_sbufs > 1 ? 0 : -ENOMEM);
dev->n_sbufs = i+1;
}
}
@@ -558,9 +560,14 @@
vdev = video_devdata(fp);
dev = vdev_to_camera(vdev);
- if (dev == NULL || !is_present(dev)) {
+ if (dev == NULL || !is_present(dev))
return -ENXIO;
- }
+
+ if (!first_init)
+ stk_camera_write_reg(dev, 0x0, 0x24);
+ else
+ first_init = 0;
+
fp->private_data = dev;
usb_autopm_get_interface(dev->interface);
@@ -574,10 +581,12 @@
if (dev->owner == fp) {
stk_stop_stream(dev);
stk_free_buffers(dev);
+ stk_camera_write_reg(dev, 0x0, 0x49); /* turn off the LED */
+ unset_initialised(dev);
dev->owner = NULL;
}
- if(is_present(dev))
+ if (is_present(dev))
usb_autopm_put_interface(dev->interface);
return 0;
@@ -654,7 +663,7 @@
return POLLERR;
if (!list_empty(&dev->sio_full))
- return (POLLIN | POLLRDNORM);
+ return POLLIN | POLLRDNORM;
return 0;
}
@@ -891,9 +900,9 @@
struct stk_camera *dev = priv;
int i;
- for (i = 0; i < ARRAY_SIZE(stk_sizes)
- && stk_sizes[i].m != dev->vsettings.mode;
- i++);
+ for (i = 0; i < ARRAY_SIZE(stk_sizes) &&
+ stk_sizes[i].m != dev->vsettings.mode; i++)
+ ;
if (i == ARRAY_SIZE(stk_sizes)) {
STK_ERROR("ERROR: mode invalid\n");
return -EINVAL;
@@ -1305,9 +1314,8 @@
usb_set_intfdata(interface, dev);
err = stk_register_video_device(dev);
- if (err) {
+ if (err)
goto error;
- }
return 0;
@@ -1350,6 +1358,7 @@
return 0;
unset_initialised(dev);
stk_initialise(dev);
+ stk_camera_write_reg(dev, 0x0, 0x49);
stk_setup_format(dev);
if (is_streaming(dev))
stk_start_stream(dev);
diff --git a/drivers/media/video/tlg2300/Makefile b/drivers/media/video/tlg2300/Makefile
index 81bb7fd..ea09b9a 100644
--- a/drivers/media/video/tlg2300/Makefile
+++ b/drivers/media/video/tlg2300/Makefile
@@ -2,8 +2,8 @@
obj-$(CONFIG_VIDEO_TLG2300) += poseidon.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-y += -Idrivers/media/dvb/frontends
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/media/video/tm6000/Kconfig
similarity index 100%
rename from drivers/staging/tm6000/Kconfig
rename to drivers/media/video/tm6000/Kconfig
diff --git a/drivers/staging/tm6000/Makefile b/drivers/media/video/tm6000/Makefile
similarity index 100%
rename from drivers/staging/tm6000/Makefile
rename to drivers/media/video/tm6000/Makefile
diff --git a/drivers/media/video/tm6000/tm6000-alsa.c b/drivers/media/video/tm6000/tm6000-alsa.c
new file mode 100644
index 0000000..7d675c72
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-alsa.c
@@ -0,0 +1,513 @@
+/*
+ *
+ * Support for audio capture for tm5600/6000/6010
+ * (c) 2007-2008 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Based on cx88-alsa.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+#undef dprintk
+
+#define dprintk(level, fmt, arg...) do { \
+ if (debug >= level) \
+ printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \
+ } while (0)
+
+/****************************************************************************
+ Module global static vars
+ ****************************************************************************/
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
+
+static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
+
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled.");
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s).");
+
+
+/****************************************************************************
+ Module macros
+ ****************************************************************************/
+
+MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},"
+ "{{Trident,tm6000},"
+ "{{Trident,tm6010}");
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+/****************************************************************************
+ Module specific funtions
+ ****************************************************************************/
+
+/*
+ * BOARD Specific: Sets audio DMA
+ */
+
+static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
+{
+ struct tm6000_core *core = chip->core;
+
+ dprintk(1, "Starting audio DMA\n");
+
+ /* Enables audio */
+ tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x40, 0x40);
+
+ tm6000_set_audio_bitrate(core, 48000);
+
+ return 0;
+}
+
+/*
+ * BOARD Specific: Resets audio DMA
+ */
+static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip)
+{
+ struct tm6000_core *core = chip->core;
+
+ dprintk(1, "Stopping audio DMA\n");
+
+ /* Disables audio */
+ tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x00, 0x40);
+
+ return 0;
+}
+
+static void dsp_buffer_free(struct snd_pcm_substream *substream)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+ dprintk(2, "Freeing buffer\n");
+
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ substream->runtime->dma_bytes = 0;
+}
+
+static int dsp_buffer_alloc(struct snd_pcm_substream *substream, int size)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+ dprintk(2, "Allocating buffer\n");
+
+ if (substream->runtime->dma_area) {
+ if (substream->runtime->dma_bytes > size)
+ return 0;
+
+ dsp_buffer_free(substream);
+ }
+
+ substream->runtime->dma_area = vmalloc(size);
+ if (!substream->runtime->dma_area)
+ return -ENOMEM;
+
+ substream->runtime->dma_bytes = size;
+
+ return 0;
+}
+
+
+/****************************************************************************
+ ALSA PCM Interface
+ ****************************************************************************/
+
+/*
+ * Digital hardware definition
+ */
+#define DEFAULT_FIFO_SIZE 4096
+
+static struct snd_pcm_hardware snd_tm6000_digital_hw = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .period_bytes_min = 64,
+ .period_bytes_max = 12544,
+ .periods_min = 1,
+ .periods_max = 98,
+ .buffer_bytes_max = 62720 * 8,
+};
+
+/*
+ * audio pcm capture open callback
+ */
+static int snd_tm6000_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int err;
+
+ err = snd_pcm_hw_constraint_pow2(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (err < 0)
+ goto _error;
+
+ chip->substream = substream;
+
+ runtime->hw = snd_tm6000_digital_hw;
+
+ return 0;
+_error:
+ dprintk(1, "Error opening PCM!\n");
+ return err;
+}
+
+/*
+ * audio close callback
+ */
+static int snd_tm6000_close(struct snd_pcm_substream *substream)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+ struct tm6000_core *core = chip->core;
+
+ if (atomic_read(&core->stream_started) > 0) {
+ atomic_set(&core->stream_started, 0);
+ schedule_work(&core->wq_trigger);
+ }
+
+ return 0;
+}
+
+static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
+{
+ struct snd_tm6000_card *chip = core->adev;
+ struct snd_pcm_substream *substream = chip->substream;
+ struct snd_pcm_runtime *runtime;
+ int period_elapsed = 0;
+ unsigned int stride, buf_pos;
+ int length;
+
+ if (atomic_read(&core->stream_started) == 0)
+ return 0;
+
+ if (!size || !substream) {
+ dprintk(1, "substream was NULL\n");
+ return -EINVAL;
+ }
+
+ runtime = substream->runtime;
+ if (!runtime || !runtime->dma_area) {
+ dprintk(1, "runtime was NULL\n");
+ return -EINVAL;
+ }
+
+ buf_pos = chip->buf_pos;
+ stride = runtime->frame_bits >> 3;
+
+ if (stride == 0) {
+ dprintk(1, "stride is zero\n");
+ return -EINVAL;
+ }
+
+ length = size / stride;
+ if (length == 0) {
+ dprintk(1, "%s: length was zero\n", __func__);
+ return -EINVAL;
+ }
+
+ dprintk(1, "Copying %d bytes at %p[%d] - buf size=%d x %d\n", size,
+ runtime->dma_area, buf_pos,
+ (unsigned int)runtime->buffer_size, stride);
+
+ if (buf_pos + length >= runtime->buffer_size) {
+ unsigned int cnt = runtime->buffer_size - buf_pos;
+ memcpy(runtime->dma_area + buf_pos * stride, buf, cnt * stride);
+ memcpy(runtime->dma_area, buf + cnt * stride,
+ length * stride - cnt * stride);
+ } else
+ memcpy(runtime->dma_area + buf_pos * stride, buf,
+ length * stride);
+
+ snd_pcm_stream_lock(substream);
+
+ chip->buf_pos += length;
+ if (chip->buf_pos >= runtime->buffer_size)
+ chip->buf_pos -= runtime->buffer_size;
+
+ chip->period_pos += length;
+ if (chip->period_pos >= runtime->period_size) {
+ chip->period_pos -= runtime->period_size;
+ period_elapsed = 1;
+ }
+
+ snd_pcm_stream_unlock(substream);
+
+ if (period_elapsed)
+ snd_pcm_period_elapsed(substream);
+
+ return 0;
+}
+
+/*
+ * hw_params callback
+ */
+static int snd_tm6000_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ int size, rc;
+
+ size = params_period_bytes(hw_params) * params_periods(hw_params);
+
+ rc = dsp_buffer_alloc(substream, size);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+/*
+ * hw free callback
+ */
+static int snd_tm6000_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+ struct tm6000_core *core = chip->core;
+
+ if (atomic_read(&core->stream_started) > 0) {
+ atomic_set(&core->stream_started, 0);
+ schedule_work(&core->wq_trigger);
+ }
+
+ dsp_buffer_free(substream);
+ return 0;
+}
+
+/*
+ * prepare callback
+ */
+static int snd_tm6000_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+ chip->buf_pos = 0;
+ chip->period_pos = 0;
+
+ return 0;
+}
+
+
+/*
+ * trigger callback
+ */
+static void audio_trigger(struct work_struct *work)
+{
+ struct tm6000_core *core = container_of(work, struct tm6000_core,
+ wq_trigger);
+ struct snd_tm6000_card *chip = core->adev;
+
+ if (atomic_read(&core->stream_started)) {
+ dprintk(1, "starting capture");
+ _tm6000_start_audio_dma(chip);
+ } else {
+ dprintk(1, "stopping capture");
+ _tm6000_stop_audio_dma(chip);
+ }
+}
+
+static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+ struct tm6000_core *core = chip->core;
+ int err = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ atomic_set(&core->stream_started, 1);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ atomic_set(&core->stream_started, 0);
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+ schedule_work(&core->wq_trigger);
+
+ return err;
+}
+/*
+ * pointer callback
+ */
+static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+ return chip->buf_pos;
+}
+
+/*
+ * operators
+ */
+static struct snd_pcm_ops snd_tm6000_pcm_ops = {
+ .open = snd_tm6000_pcm_open,
+ .close = snd_tm6000_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_tm6000_hw_params,
+ .hw_free = snd_tm6000_hw_free,
+ .prepare = snd_tm6000_prepare,
+ .trigger = snd_tm6000_card_trigger,
+ .pointer = snd_tm6000_pointer,
+};
+
+/*
+ * create a PCM device
+ */
+
+/* FIXME: Control interface - How to control volume/mute? */
+
+/****************************************************************************
+ Basic Flow for Sound Devices
+ ****************************************************************************/
+
+/*
+ * Alsa Constructor - Component probe
+ */
+static int tm6000_audio_init(struct tm6000_core *dev)
+{
+ struct snd_card *card;
+ struct snd_tm6000_card *chip;
+ int rc;
+ static int devnr;
+ char component[14];
+ struct snd_pcm *pcm;
+
+ if (!dev)
+ return 0;
+
+ if (devnr >= SNDRV_CARDS)
+ return -ENODEV;
+
+ if (!enable[devnr])
+ return -ENOENT;
+
+ rc = snd_card_create(index[devnr], "tm6000", THIS_MODULE, 0, &card);
+ if (rc < 0) {
+ snd_printk(KERN_ERR "cannot create card instance %d\n", devnr);
+ return rc;
+ }
+ strcpy(card->driver, "tm6000-alsa");
+ strcpy(card->shortname, "TM5600/60x0");
+ sprintf(card->longname, "TM5600/60x0 Audio at bus %d device %d",
+ dev->udev->bus->busnum, dev->udev->devnum);
+
+ sprintf(component, "USB%04x:%04x",
+ le16_to_cpu(dev->udev->descriptor.idVendor),
+ le16_to_cpu(dev->udev->descriptor.idProduct));
+ snd_component_add(card, component);
+ snd_card_set_dev(card, &dev->udev->dev);
+
+ chip = kzalloc(sizeof(struct snd_tm6000_card), GFP_KERNEL);
+ if (!chip) {
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ chip->core = dev;
+ chip->card = card;
+ dev->adev = chip;
+ spin_lock_init(&chip->reg_lock);
+
+ rc = snd_pcm_new(card, "TM6000 Audio", 0, 0, 1, &pcm);
+ if (rc < 0)
+ goto error_chip;
+
+ pcm->info_flags = 0;
+ pcm->private_data = chip;
+ strcpy(pcm->name, "Trident TM5600/60x0");
+
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops);
+
+ INIT_WORK(&dev->wq_trigger, audio_trigger);
+ rc = snd_card_register(card);
+ if (rc < 0)
+ goto error_chip;
+
+ dprintk(1, "Registered audio driver for %s\n", card->longname);
+
+ return 0;
+
+error_chip:
+ kfree(chip);
+ dev->adev = NULL;
+error:
+ snd_card_free(card);
+ return rc;
+}
+
+static int tm6000_audio_fini(struct tm6000_core *dev)
+{
+ struct snd_tm6000_card *chip = dev->adev;
+
+ if (!dev)
+ return 0;
+
+ if (!chip)
+ return 0;
+
+ if (!chip->card)
+ return 0;
+
+ snd_card_free(chip->card);
+ chip->card = NULL;
+ kfree(chip);
+ dev->adev = NULL;
+
+ return 0;
+}
+
+static struct tm6000_ops audio_ops = {
+ .type = TM6000_AUDIO,
+ .name = "TM6000 Audio Extension",
+ .init = tm6000_audio_init,
+ .fini = tm6000_audio_fini,
+ .fillbuf = tm6000_fillbuf,
+};
+
+static int __init tm6000_alsa_register(void)
+{
+ return tm6000_register_extension(&audio_ops);
+}
+
+static void __exit tm6000_alsa_unregister(void)
+{
+ tm6000_unregister_extension(&audio_ops);
+}
+
+module_init(tm6000_alsa_register);
+module_exit(tm6000_alsa_unregister);
diff --git a/drivers/media/video/tm6000/tm6000-cards.c b/drivers/media/video/tm6000/tm6000-cards.c
new file mode 100644
index 0000000..ec2578a
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-cards.c
@@ -0,0 +1,1402 @@
+/*
+ * tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
+#include <media/rc-map.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+
+#define TM6000_BOARD_UNKNOWN 0
+#define TM5600_BOARD_GENERIC 1
+#define TM6000_BOARD_GENERIC 2
+#define TM6010_BOARD_GENERIC 3
+#define TM5600_BOARD_10MOONS_UT821 4
+#define TM5600_BOARD_10MOONS_UT330 5
+#define TM6000_BOARD_ADSTECH_DUAL_TV 6
+#define TM6000_BOARD_FREECOM_AND_SIMILAR 7
+#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8
+#define TM6010_BOARD_HAUPPAUGE_900H 9
+#define TM6010_BOARD_BEHOLD_WANDER 10
+#define TM6010_BOARD_BEHOLD_VOYAGER 11
+#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
+#define TM6010_BOARD_TWINHAN_TU501 13
+#define TM6010_BOARD_BEHOLD_WANDER_LITE 14
+#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15
+#define TM5600_BOARD_TERRATEC_GRABSTER 16
+
+#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
+ (model == TM5600_BOARD_GENERIC) || \
+ (model == TM6000_BOARD_GENERIC) || \
+ (model == TM6010_BOARD_GENERIC))
+
+#define TM6000_MAXBOARDS 16
+static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(card, int, NULL, 0444);
+
+static unsigned long tm6000_devused;
+
+
+struct tm6000_board {
+ char *name;
+ char eename[16]; /* EEPROM name */
+ unsigned eename_size; /* size of EEPROM name */
+ unsigned eename_pos; /* Position where it appears at ROM */
+
+ struct tm6000_capabilities caps;
+
+ enum tm6000_devtype type; /* variant of the chipset */
+ int tuner_type; /* type of the tuner */
+ int tuner_addr; /* tuner address */
+ int demod_addr; /* demodulator address */
+
+ struct tm6000_gpio gpio;
+
+ struct tm6000_input vinput[3];
+ struct tm6000_input rinput;
+
+ char *ir_codes;
+};
+
+static struct tm6000_board tm6000_boards[] = {
+ [TM6000_BOARD_UNKNOWN] = {
+ .name = "Unknown tm6000 video grabber",
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM5600_BOARD_GENERIC] = {
+ .name = "Generic tm5600 board",
+ .type = TM5600,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_GENERIC] = {
+ .name = "Generic tm6000 board",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_GENERIC] = {
+ .name = "Generic tm6010 board",
+ .type = TM6010,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM5600_BOARD_10MOONS_UT821] = {
+ .name = "10Moons UT 821",
+ .tuner_type = TUNER_XC2028,
+ .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
+ .eename_size = 14,
+ .eename_pos = 0x14,
+ .type = TM5600,
+ .tuner_addr = 0xc2 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_eeprom = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM5600_BOARD_10MOONS_UT330] = {
+ .name = "10Moons UT 330",
+ .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4,
+ .tuner_addr = 0xc8 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_ADSTECH_DUAL_TV] = {
+ .name = "ADSTECH Dual TV USB",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0xc8 >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_tda9874 = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
+ .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 0,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_4,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
+ .name = "ADSTECH Mini Dual TV USB",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc8 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 0,
+ },
+ .gpio = {
+ .tuner_reset = TM6000_GPIO_4,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_HAUPPAUGE_900H] = {
+ .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
+ .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
+ .eename_size = 14,
+ .eename_pos = 0x42,
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_BEHOLD_WANDER] = {
+ .name = "Beholder Wander DVB-T/TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .demod_reset = TM6010_GPIO_1,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+ [TM6010_BOARD_BEHOLD_VOYAGER] = {
+ .name = "Beholder Voyager TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+ [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
+ .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_SIF1,
+ },
+ },
+ [TM5600_BOARD_TERRATEC_GRABSTER] = {
+ .name = "Terratec Grabster AV 150/250 MX",
+ .type = TM5600,
+ .tuner_type = TUNER_ABSENT,
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_ADC1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_TWINHAN_TU501] = {
+ .name = "Twinhan TU501(704D1)",
+ .tuner_type = TUNER_XC2028, /* has a XC3028 */
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_2,
+ .tuner_on = TM6010_GPIO_3,
+ .demod_reset = TM6010_GPIO_1,
+ .demod_on = TM6010_GPIO_4,
+ .power_led = TM6010_GPIO_7,
+ .dvb_led = TM6010_GPIO_5,
+ .ir = TM6010_GPIO_0,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ }, {
+ .type = TM6000_INPUT_COMPOSITE1,
+ .vmux = TM6000_VMUX_VIDEO_A,
+ .amux = TM6000_AMUX_ADC2,
+ }, {
+ .type = TM6000_INPUT_SVIDEO,
+ .vmux = TM6000_VMUX_VIDEO_AB,
+ .amux = TM6000_AMUX_ADC2,
+ },
+ },
+ },
+ [TM6010_BOARD_BEHOLD_WANDER_LITE] = {
+ .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .demod_addr = 0x1e >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 1,
+ .has_zl10353 = 1,
+ .has_eeprom = 1,
+ .has_remote = 0,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .demod_reset = TM6010_GPIO_1,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+ [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
+ .name = "Beholder Voyager Lite TV/FM USB2.0",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0xc2 >> 1,
+ .type = TM6010,
+ .caps = {
+ .has_tuner = 1,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 1,
+ .has_remote = 0,
+ .has_radio = 1,
+ },
+ .gpio = {
+ .tuner_reset = TM6010_GPIO_0,
+ .power_led = TM6010_GPIO_6,
+ },
+ .vinput = { {
+ .type = TM6000_INPUT_TV,
+ .vmux = TM6000_VMUX_VIDEO_B,
+ .amux = TM6000_AMUX_SIF1,
+ },
+ },
+ .rinput = {
+ .type = TM6000_INPUT_RADIO,
+ .amux = TM6000_AMUX_ADC1,
+ },
+ },
+};
+
+/* table of devices that work with this driver */
+static struct usb_device_id tm6000_id_table[] = {
+ { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
+ { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
+ { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
+ { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
+ { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
+ { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+ { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
+ { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
+ { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+ { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
+ { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+ { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
+ { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
+ { }
+};
+
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+ /* Power LED unconfigured */
+ if (!dev->gpio.power_led)
+ return;
+
+ /* ON Power LED */
+ if (state) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ }
+ }
+ /* OFF Power LED */
+ else {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ }
+ }
+}
+
+/* Tuner callback to provide the proper gpio changes needed for xc5000 */
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
+{
+ int rc = 0;
+ struct tm6000_core *dev = ptr;
+
+ if (dev->tuner_type != TUNER_XC5000)
+ return 0;
+
+ switch (command) {
+ case XC5000_TUNER_RESET:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ break;
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
+
+/* Tuner callback to provide the proper gpio changes needed for xc2028 */
+
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
+{
+ int rc = 0;
+ struct tm6000_core *dev = ptr;
+
+ if (dev->tuner_type != TUNER_XC2028)
+ return 0;
+
+ switch (command) {
+ case XC2028_RESET_CLK:
+ tm6000_ir_wait(dev, 0);
+
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, arg);
+ msleep(10);
+ rc = tm6000_i2c_reset(dev, 10);
+ break;
+ case XC2028_TUNER_RESET:
+ /* Reset codes during load firmware */
+ switch (arg) {
+ case 0:
+ /* newer tuner can faster reset */
+ switch (dev->model) {
+ case TM5600_BOARD_10MOONS_UT821:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x01);
+ msleep(10);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x00);
+ msleep(10);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ 0x300, 0x01);
+ break;
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(60);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(75);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(60);
+ break;
+ default:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ msleep(130);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ msleep(130);
+ break;
+ }
+
+ tm6000_ir_wait(dev, 1);
+ break;
+ case 1:
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+ 0x02, 0x01);
+ msleep(10);
+ break;
+ case 2:
+ rc = tm6000_i2c_reset(dev, 100);
+ break;
+ }
+ break;
+ case XC2028_I2C_FLUSH:
+ tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+ tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+ break;
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
+
+int tm6000_cards_setup(struct tm6000_core *dev)
+{
+ /*
+ * Board-specific initialization sequence. Handles all GPIO
+ * initialization sequences that are board-specific.
+ * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
+ * Probably, they're all based on some reference device. Due to that,
+ * there's a common routine at the end to handle those GPIO's. Devices
+ * that use different pinups or init sequences can just return at
+ * the board-specific session.
+ */
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ case TM6010_BOARD_GENERIC:
+ /* Turn xceive 3028 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+ msleep(15);
+ /* Reset zarlink zl10353 */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
+ msleep(15);
+ /* ir ? */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
+ msleep(15);
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
+ msleep(15);
+ /* DVB led off (orange) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
+ msleep(15);
+ /* Turn zarlink zl10353 on */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+ msleep(15);
+ /* Reset zarlink zl10353 */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ /* Power led on (blue) */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+ msleep(15);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Default initialization. Most of the devices seem to use GPIO1
+ * and GPIO4.on the same way, so, this handles the common sequence
+ * used by most devices.
+ * If a device uses a different sequence or different GPIO pins for
+ * reset, just add the code at the board-specific part
+ */
+
+ if (dev->gpio.tuner_reset) {
+ int rc;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x00);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+ return rc;
+ }
+
+ msleep(10); /* Just to be conservative */
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset, 0x01);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+ return rc;
+ }
+ }
+ } else {
+ printk(KERN_ERR "Tuner reset is not configured\n");
+ return -1;
+ }
+
+ msleep(50);
+
+ return 0;
+};
+
+static void tm6000_config_tuner(struct tm6000_core *dev)
+{
+ struct tuner_setup tun_setup;
+
+ /* Load tuner module */
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tuner", dev->tuner_addr, NULL);
+
+ memset(&tun_setup, 0, sizeof(tun_setup));
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr;
+
+ tun_setup.mode_mask = 0;
+ if (dev->caps.has_tuner)
+ tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
+
+ switch (dev->tuner_type) {
+ case TUNER_XC2028:
+ tun_setup.tuner_callback = tm6000_tuner_callback;
+ break;
+ case TUNER_XC5000:
+ tun_setup.tuner_callback = tm6000_xc5000_callback;
+ break;
+ }
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+
+ switch (dev->tuner_type) {
+ case TUNER_XC2028: {
+ struct v4l2_priv_tun_config xc2028_cfg;
+ struct xc2028_ctrl ctl;
+
+ memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+ memset(&ctl, 0, sizeof(ctl));
+
+ ctl.demod = XC3028_FE_ZARLINK456;
+
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
+
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ ctl.fname = "xc3028L-v36.fw";
+ break;
+ default:
+ if (dev->dev_type == TM6010)
+ ctl.fname = "xc3028-v27.fw";
+ else
+ ctl.fname = "xc3028-v24.fw";
+ }
+
+ printk(KERN_INFO "Setting firmware parameters for xc2028\n");
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+ &xc2028_cfg);
+
+ }
+ break;
+ case TUNER_XC5000:
+ {
+ struct v4l2_priv_tun_config xc5000_cfg;
+ struct xc5000_config ctl = {
+ .i2c_address = dev->tuner_addr,
+ .if_khz = 4570,
+ .radio_input = XC5000_RADIO_FM1_MONO,
+ };
+
+ xc5000_cfg.tuner = TUNER_XC5000;
+ xc5000_cfg.priv = &ctl;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+ &xc5000_cfg);
+ }
+ break;
+ default:
+ printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
+ break;
+ }
+}
+
+static int fill_board_specific_data(struct tm6000_core *dev)
+{
+ int rc;
+
+ dev->dev_type = tm6000_boards[dev->model].type;
+ dev->tuner_type = tm6000_boards[dev->model].tuner_type;
+ dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
+
+ dev->gpio = tm6000_boards[dev->model].gpio;
+
+ dev->ir_codes = tm6000_boards[dev->model].ir_codes;
+
+ dev->demod_addr = tm6000_boards[dev->model].demod_addr;
+
+ dev->caps = tm6000_boards[dev->model].caps;
+
+ dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
+ dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
+ dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
+ dev->rinput = tm6000_boards[dev->model].rinput;
+
+ /* setup per-model quirks */
+ switch (dev->model) {
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ dev->quirks |= TM6000_QUIRK_NO_USB_DELAY;
+ break;
+
+ default:
+ break;
+ }
+
+ /* initialize hardware */
+ rc = tm6000_init(dev);
+ if (rc < 0)
+ return rc;
+
+ return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
+}
+
+
+static void use_alternative_detection_method(struct tm6000_core *dev)
+{
+ int i, model = -1;
+
+ if (!dev->eedata_size)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
+ if (!tm6000_boards[i].eename_size)
+ continue;
+ if (dev->eedata_size < tm6000_boards[i].eename_pos +
+ tm6000_boards[i].eename_size)
+ continue;
+
+ if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
+ tm6000_boards[i].eename,
+ tm6000_boards[i].eename_size)) {
+ model = i;
+ break;
+ }
+ }
+ if (model < 0) {
+ printk(KERN_INFO "Device has eeprom but is currently unknown\n");
+ return;
+ }
+
+ dev->model = model;
+
+ printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
+ tm6000_boards[model].name, model);
+}
+
+static int tm6000_init_dev(struct tm6000_core *dev)
+{
+ struct v4l2_frequency f;
+ int rc = 0;
+
+ mutex_init(&dev->lock);
+ mutex_lock(&dev->lock);
+
+ if (!is_generic(dev->model)) {
+ rc = fill_board_specific_data(dev);
+ if (rc < 0)
+ goto err;
+
+ /* register i2c bus */
+ rc = tm6000_i2c_register(dev);
+ if (rc < 0)
+ goto err;
+ } else {
+ /* register i2c bus */
+ rc = tm6000_i2c_register(dev);
+ if (rc < 0)
+ goto err;
+
+ use_alternative_detection_method(dev);
+
+ rc = fill_board_specific_data(dev);
+ if (rc < 0)
+ goto err;
+ }
+
+ /* Default values for STD and resolutions */
+ dev->width = 720;
+ dev->height = 480;
+ dev->norm = V4L2_STD_PAL_M;
+
+ /* Configure tuner */
+ tm6000_config_tuner(dev);
+
+ /* Set video standard */
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
+
+ /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
+ f.tuner = 0;
+ f.type = V4L2_TUNER_ANALOG_TV;
+ f.frequency = 3092; /* 193.25 MHz */
+ dev->freq = f.frequency;
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
+
+ if (dev->caps.has_tda9874)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tvaudio", I2C_ADDR_TDA9874, NULL);
+
+ /* register and initialize V4L2 */
+ rc = tm6000_v4l2_register(dev);
+ if (rc < 0)
+ goto err;
+
+ tm6000_add_into_devlist(dev);
+ tm6000_init_extension(dev);
+
+ tm6000_ir_init(dev);
+
+ mutex_unlock(&dev->lock);
+ return 0;
+
+err:
+ mutex_unlock(&dev->lock);
+ return rc;
+}
+
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
+static void get_max_endpoint(struct usb_device *udev,
+ struct usb_host_interface *alt,
+ char *msgtype,
+ struct usb_host_endpoint *curr_e,
+ struct tm6000_endpoint *tm_ep)
+{
+ u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
+ unsigned int size = tmp & 0x7ff;
+
+ if (udev->speed == USB_SPEED_HIGH)
+ size = size * hb_mult(tmp);
+
+ if (size > tm_ep->maxsize) {
+ tm_ep->endp = curr_e;
+ tm_ep->maxsize = size;
+ tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
+ tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
+
+ printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
+ msgtype, curr_e->desc.bEndpointAddress,
+ size);
+ }
+}
+
+/*
+ * tm6000_usb_probe()
+ * checks for supported devices
+ */
+static int tm6000_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev;
+ struct tm6000_core *dev = NULL;
+ int i, rc = 0;
+ int nr = 0;
+ char *speed;
+
+ usbdev = usb_get_dev(interface_to_usbdev(interface));
+
+ /* Selects the proper interface */
+ rc = usb_set_interface(usbdev, 0, 1);
+ if (rc < 0)
+ goto err;
+
+ /* Check to see next free device and mark as used */
+ nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
+ if (nr >= TM6000_MAXBOARDS) {
+ printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
+ usb_put_dev(usbdev);
+ return -ENOMEM;
+ }
+
+ /* Create and initialize dev struct */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ printk(KERN_ERR "tm6000" ": out of memory!\n");
+ usb_put_dev(usbdev);
+ return -ENOMEM;
+ }
+ spin_lock_init(&dev->slock);
+ mutex_init(&dev->usb_lock);
+
+ /* Increment usage count */
+ set_bit(nr, &tm6000_devused);
+ snprintf(dev->name, 29, "tm6000 #%d", nr);
+
+ dev->model = id->driver_info;
+ if (card[nr] < ARRAY_SIZE(tm6000_boards))
+ dev->model = card[nr];
+
+ dev->udev = usbdev;
+ dev->devno = nr;
+
+ switch (usbdev->speed) {
+ case USB_SPEED_LOW:
+ speed = "1.5";
+ break;
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_FULL:
+ speed = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "480";
+ break;
+ default:
+ speed = "unknown";
+ }
+
+ /* Get endpoints */
+ for (i = 0; i < interface->num_altsetting; i++) {
+ int ep;
+
+ for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+ struct usb_host_endpoint *e;
+ int dir_out;
+
+ e = &interface->altsetting[i].endpoint[ep];
+
+ dir_out = ((e->desc.bEndpointAddress &
+ USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+
+ printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
+ i,
+ interface->altsetting[i].desc.bInterfaceNumber,
+ interface->altsetting[i].desc.bInterfaceClass);
+
+ switch (e->desc.bmAttributes) {
+ case USB_ENDPOINT_XFER_BULK:
+ if (!dir_out) {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "Bulk IN", e,
+ &dev->bulk_in);
+ } else {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "Bulk OUT", e,
+ &dev->bulk_out);
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!dir_out) {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "ISOC IN", e,
+ &dev->isoc_in);
+ } else {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "ISOC OUT", e,
+ &dev->isoc_out);
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (!dir_out) {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "INT IN", e,
+ &dev->int_in);
+ } else {
+ get_max_endpoint(usbdev,
+ &interface->altsetting[i],
+ "INT OUT", e,
+ &dev->int_out);
+ }
+ break;
+ }
+ }
+ }
+
+
+ printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
+ speed,
+ le16_to_cpu(dev->udev->descriptor.idVendor),
+ le16_to_cpu(dev->udev->descriptor.idProduct),
+ interface->altsetting->desc.bInterfaceNumber);
+
+/* check if the the device has the iso in endpoint at the correct place */
+ if (!dev->isoc_in.endp) {
+ printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
+ rc = -ENODEV;
+
+ goto err;
+ }
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
+
+ rc = tm6000_init_dev(dev);
+ if (rc < 0)
+ goto err;
+
+ return 0;
+
+err:
+ printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
+
+ clear_bit(nr, &tm6000_devused);
+ usb_put_dev(usbdev);
+
+ kfree(dev);
+ return rc;
+}
+
+/*
+ * tm6000_usb_disconnect()
+ * called when the device gets diconencted
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void tm6000_usb_disconnect(struct usb_interface *interface)
+{
+ struct tm6000_core *dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ if (!dev)
+ return;
+
+ printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
+
+ tm6000_ir_fini(dev);
+
+ if (dev->gpio.power_led) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ /* Power led off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ case TM6010_BOARD_BEHOLD_WANDER_LITE:
+ case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+ /* Power led off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ msleep(15);
+ break;
+ }
+ }
+ tm6000_v4l2_unregister(dev);
+
+ tm6000_i2c_unregister(dev);
+
+ v4l2_device_unregister(&dev->v4l2_dev);
+
+ dev->state |= DEV_DISCONNECTED;
+
+ usb_put_dev(dev->udev);
+
+ tm6000_close_extension(dev);
+ tm6000_remove_from_devlist(dev);
+
+ clear_bit(dev->devno, &tm6000_devused);
+ kfree(dev);
+}
+
+static struct usb_driver tm6000_usb_driver = {
+ .name = "tm6000",
+ .probe = tm6000_usb_probe,
+ .disconnect = tm6000_usb_disconnect,
+ .id_table = tm6000_id_table,
+};
+
+static int __init tm6000_module_init(void)
+{
+ int result;
+
+ printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
+ (TM6000_VERSION >> 16) & 0xff,
+ (TM6000_VERSION >> 8) & 0xff, TM6000_VERSION & 0xff);
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&tm6000_usb_driver);
+ if (result)
+ printk(KERN_ERR "tm6000"
+ " usb_register failed. Error number %d.\n", result);
+
+ return result;
+}
+
+static void __exit tm6000_module_exit(void)
+{
+ /* deregister at USB subsystem */
+ usb_deregister(&tm6000_usb_driver);
+}
+
+module_init(tm6000_module_init);
+module_exit(tm6000_module_exit);
+
+MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/tm6000/tm6000-core.c b/drivers/media/video/tm6000/tm6000-core.c
new file mode 100644
index 0000000..9783616
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-core.c
@@ -0,0 +1,965 @@
+/*
+ * tm6000-core.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ * - DVB-T support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+
+#define USB_TIMEOUT (5 * HZ) /* ms */
+
+int tm6000_read_write_usb(struct tm6000_core *dev, u8 req_type, u8 req,
+ u16 value, u16 index, u8 *buf, u16 len)
+{
+ int ret, i;
+ unsigned int pipe;
+ u8 *data = NULL;
+
+ mutex_lock(&dev->usb_lock);
+
+ if (len)
+ data = kzalloc(len, GFP_KERNEL);
+
+ if (req_type & USB_DIR_IN)
+ pipe = usb_rcvctrlpipe(dev->udev, 0);
+ else {
+ pipe = usb_sndctrlpipe(dev->udev, 0);
+ memcpy(data, buf, len);
+ }
+
+ if (tm6000_debug & V4L2_DEBUG_I2C) {
+ printk(KERN_DEBUG "(dev %p, pipe %08x): ", dev->udev, pipe);
+
+ printk(KERN_CONT "%s: %02x %02x %02x %02x %02x %02x %02x %02x ",
+ (req_type & USB_DIR_IN) ? " IN" : "OUT",
+ req_type, req, value&0xff, value>>8, index&0xff,
+ index>>8, len&0xff, len>>8);
+
+ if (!(req_type & USB_DIR_IN)) {
+ printk(KERN_CONT ">>> ");
+ for (i = 0; i < len; i++)
+ printk(KERN_CONT " %02x", buf[i]);
+ printk(KERN_CONT "\n");
+ }
+ }
+
+ ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index,
+ data, len, USB_TIMEOUT);
+
+ if (req_type & USB_DIR_IN)
+ memcpy(buf, data, len);
+
+ if (tm6000_debug & V4L2_DEBUG_I2C) {
+ if (ret < 0) {
+ if (req_type & USB_DIR_IN)
+ printk(KERN_DEBUG "<<< (len=%d)\n", len);
+
+ printk(KERN_CONT "%s: Error #%d\n", __func__, ret);
+ } else if (req_type & USB_DIR_IN) {
+ printk(KERN_CONT "<<< ");
+ for (i = 0; i < len; i++)
+ printk(KERN_CONT " %02x", buf[i]);
+ printk(KERN_CONT "\n");
+ }
+ }
+
+ kfree(data);
+ msleep(5);
+
+ mutex_unlock(&dev->usb_lock);
+ return ret;
+}
+
+int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+ return
+ tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+ req, value, index, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(tm6000_set_reg);
+
+int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+ int rc;
+ u8 buf[1];
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+ value, index, buf, 1);
+
+ if (rc < 0)
+ return rc;
+
+ return *buf;
+}
+EXPORT_SYMBOL_GPL(tm6000_get_reg);
+
+int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
+ u16 index, u16 mask)
+{
+ int rc;
+ u8 buf[1];
+ u8 new_index;
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+ value, index, buf, 1);
+
+ if (rc < 0)
+ return rc;
+
+ new_index = (buf[0] & ~mask) | (index & mask);
+
+ if (new_index == index)
+ return 0;
+
+ return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+ req, value, new_index, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(tm6000_set_reg_mask);
+
+int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+ int rc;
+ u8 buf[2];
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+ value, index, buf, 2);
+
+ if (rc < 0)
+ return rc;
+
+ return buf[1]|buf[0]<<8;
+}
+
+int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+ int rc;
+ u8 buf[4];
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+ value, index, buf, 4);
+
+ if (rc < 0)
+ return rc;
+
+ return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24;
+}
+
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep)
+{
+ int rc;
+
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
+ if (rc < 0)
+ return rc;
+
+ msleep(tsleep);
+
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
+ msleep(tsleep);
+
+ return rc;
+}
+
+void tm6000_set_fourcc_format(struct tm6000_core *dev)
+{
+ if (dev->dev_type == TM6010) {
+ int val;
+
+ val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, 0) & 0xfc;
+ if (dev->fourcc == V4L2_PIX_FMT_UYVY)
+ tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val);
+ else
+ tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val | 1);
+ } else {
+ if (dev->fourcc == V4L2_PIX_FMT_UYVY)
+ tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
+ else
+ tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0x90);
+ }
+}
+
+static void tm6000_set_vbi(struct tm6000_core *dev)
+{
+ /*
+ * FIXME:
+ * VBI lines and start/end are different between 60Hz and 50Hz
+ * So, it is very likely that we need to change the config to
+ * something that takes it into account, doing something different
+ * if (dev->norm & V4L2_STD_525_60)
+ */
+
+ if (dev->dev_type == TM6010) {
+ tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
+ tm6000_set_reg(dev, TM6010_REQ07_R41_TELETEXT_VBI_CODE1, 0x27);
+ tm6000_set_reg(dev, TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55);
+ tm6000_set_reg(dev, TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7, 0x66);
+ tm6000_set_reg(dev, TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8, 0x66);
+ tm6000_set_reg(dev, TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22, 0x66);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23, 0x00);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES, 0x00);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN, 0x00);
+ tm6000_set_reg(dev,
+ TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02);
+ tm6000_set_reg(dev, TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35);
+ tm6000_set_reg(dev, TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0);
+ tm6000_set_reg(dev, TM6010_REQ07_R5A_VBI_TELETEXT_DTO1, 0x11);
+ tm6000_set_reg(dev, TM6010_REQ07_R5B_VBI_TELETEXT_DTO0, 0x4c);
+ tm6000_set_reg(dev, TM6010_REQ07_R40_TELETEXT_VBI_CODE0, 0x01);
+ tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
+ }
+}
+
+int tm6000_init_analog_mode(struct tm6000_core *dev)
+{
+ struct v4l2_frequency f;
+
+ if (dev->dev_type == TM6010) {
+ u8 active = TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE;
+
+ if (!dev->radio)
+ active |= TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE;
+
+ /* Enable video and audio */
+ tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
+ active, 0x60);
+ /* Disable TS input */
+ tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
+ 0x00, 0x40);
+ } else {
+ /* Enables soft reset */
+ tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
+
+ if (dev->scaler)
+ /* Disable Hfilter and Enable TS Drop err */
+ tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x20);
+ else /* Enable Hfilter and disable TS Drop err */
+ tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x80);
+
+ tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x88);
+ tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x23);
+ tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xc0);
+ tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xd8);
+ tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x06);
+ tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f);
+
+ /* AP Software reset */
+ tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
+ tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
+
+ tm6000_set_fourcc_format(dev);
+
+ /* Disables soft reset */
+ tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
+ }
+ msleep(20);
+
+ /* Tuner firmware can now be loaded */
+
+ /*
+ * FIXME: This is a hack! xc3028 "sleeps" when no channel is detected
+ * for more than a few seconds. Not sure why, as this behavior does
+ * not happen on other devices with xc3028. So, I suspect that it
+ * is yet another bug at tm6000. After start sleeping, decoding
+ * doesn't start automatically. Instead, it requires some
+ * I2C commands to wake it up. As we want to have image at the
+ * beginning, we needed to add this hack. The better would be to
+ * discover some way to make tm6000 to wake up without this hack.
+ */
+ f.frequency = dev->freq;
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
+
+ msleep(100);
+ tm6000_set_standard(dev);
+ tm6000_set_vbi(dev);
+ tm6000_set_audio_bitrate(dev, 48000);
+
+ /* switch dvb led off */
+ if (dev->gpio.dvb_led) {
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.dvb_led, 0x01);
+ }
+
+ return 0;
+}
+
+int tm6000_init_digital_mode(struct tm6000_core *dev)
+{
+ if (dev->dev_type == TM6010) {
+ /* Disable video and audio */
+ tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
+ 0x00, 0x60);
+ /* Enable TS input */
+ tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
+ 0x40, 0x40);
+ /* all power down, but not the digital data port */
+ tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0x28);
+ tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc);
+ tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff);
+ } else {
+ tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
+ tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
+ tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x08);
+ tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
+ tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
+ tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0xd8);
+ tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x40);
+ tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
+ tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x09);
+ tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x37);
+ tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xd8);
+ tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xc0);
+ tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x60);
+
+ tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
+ tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
+ tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0x08);
+ msleep(50);
+
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01);
+ msleep(50);
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
+ msleep(100);
+ }
+
+ /* switch dvb led on */
+ if (dev->gpio.dvb_led) {
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.dvb_led, 0x00);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(tm6000_init_digital_mode);
+
+struct reg_init {
+ u8 req;
+ u8 reg;
+ u8 val;
+};
+
+/* The meaning of those initializations are unknown */
+static struct reg_init tm6000_init_tab[] = {
+ /* REG VALUE */
+ { TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f },
+ { TM6010_REQ07_RFF_SOFT_RESET, 0x08 },
+ { TM6010_REQ07_RFF_SOFT_RESET, 0x00 },
+ { TM6010_REQ07_RD5_POWERSAVE, 0x4f },
+ { TM6000_REQ07_RDA_CLK_SEL, 0x23 },
+ { TM6000_REQ07_RDB_OUT_SEL, 0x08 },
+ { TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x00 },
+ { TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10 },
+ { TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00 },
+ { TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00 },
+ { TM6000_REQ07_REB_VADC_AADC_MODE, 0x64 }, /* 48000 bits/sample, external input */
+ { TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL, 0xc2 },
+
+ { TM6010_REQ07_R3F_RESET, 0x01 }, /* Start of soft reset */
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+ { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
+ { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
+ { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
+ { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
+ { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
+ { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
+ { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
+ { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
+ { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
+ { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
+ { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
+ { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
+ { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+ { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+ { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
+ { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
+ { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
+ { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
+ { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
+ { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
+ { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
+ { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
+ { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
+ { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
+ { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+ { TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
+ { TM6010_REQ07_RC3_HSTART1, 0x88 },
+ { TM6010_REQ07_R3F_RESET, 0x00 }, /* End of the soft reset */
+ { TM6010_REQ05_R18_IMASK7, 0x00 },
+};
+
+static struct reg_init tm6010_init_tab[] = {
+ { TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x00 },
+ { TM6010_REQ07_RC4_HSTART0, 0xa0 },
+ { TM6010_REQ07_RC6_HEND0, 0x40 },
+ { TM6010_REQ07_RCA_VEND0, 0x31 },
+ { TM6010_REQ07_RCC_ACTIVE_IF, 0xe1 },
+ { TM6010_REQ07_RE0_DVIDEO_SOURCE, 0x03 },
+ { TM6010_REQ07_RFE_POWER_DOWN, 0x7f },
+
+ { TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xf0 },
+ { TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4 },
+ { TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8 },
+ { TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0x00 },
+ { TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2 },
+ { TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0 },
+ { TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2 },
+ { TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, 0x60 },
+ { TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc },
+
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+ { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
+ { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
+ { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
+ { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
+ { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
+ { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
+ { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
+ { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
+ { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
+ { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
+ { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
+ { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
+ { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+ { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+ { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
+ { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
+ { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
+ { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
+ { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
+ { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
+ { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
+ { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
+ { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
+ { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
+ { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+ { TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
+ { TM6010_REQ07_RC3_HSTART1, 0x88 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+
+ { TM6010_REQ05_R18_IMASK7, 0x00 },
+
+ { TM6010_REQ07_RD8_IR_LEADER1, 0xaa },
+ { TM6010_REQ07_RD8_IR_LEADER0, 0x30 },
+ { TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20 },
+ { TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0 },
+ { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
+ { TM6010_REQ07_RD8_IR, 0x2f },
+
+ /* set remote wakeup key:any key wakeup */
+ { TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe },
+ { TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff },
+};
+
+int tm6000_init(struct tm6000_core *dev)
+{
+ int board, rc = 0, i, size;
+ struct reg_init *tab;
+
+ /* Check board revision */
+ board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
+ if (board >= 0) {
+ switch (board & 0xff) {
+ case 0xf3:
+ printk(KERN_INFO "Found tm6000\n");
+ if (dev->dev_type != TM6000)
+ dev->dev_type = TM6000;
+ break;
+ case 0xf4:
+ printk(KERN_INFO "Found tm6010\n");
+ if (dev->dev_type != TM6010)
+ dev->dev_type = TM6010;
+ break;
+ default:
+ printk(KERN_INFO "Unknown board version = 0x%08x\n", board);
+ }
+ } else
+ printk(KERN_ERR "Error %i while retrieving board version\n", board);
+
+ if (dev->dev_type == TM6010) {
+ tab = tm6010_init_tab;
+ size = ARRAY_SIZE(tm6010_init_tab);
+ } else {
+ tab = tm6000_init_tab;
+ size = ARRAY_SIZE(tm6000_init_tab);
+ }
+
+ /* Load board's initialization table */
+ for (i = 0; i < size; i++) {
+ rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i while setting req %d, "
+ "reg %d to value %d\n", rc,
+ tab[i].req, tab[i].reg, tab[i].val);
+ return rc;
+ }
+ }
+
+ msleep(5); /* Just to be conservative */
+
+ rc = tm6000_cards_setup(dev);
+
+ return rc;
+}
+
+int tm6000_reset(struct tm6000_core *dev)
+{
+ int pipe;
+ int err;
+
+ msleep(500);
+
+ err = usb_set_interface(dev->udev, dev->isoc_in.bInterfaceNumber, 0);
+ if (err < 0) {
+ tm6000_err("failed to select interface %d, alt. setting 0\n",
+ dev->isoc_in.bInterfaceNumber);
+ return err;
+ }
+
+ err = usb_reset_configuration(dev->udev);
+ if (err < 0) {
+ tm6000_err("failed to reset configuration\n");
+ return err;
+ }
+
+ if ((dev->quirks & TM6000_QUIRK_NO_USB_DELAY) == 0)
+ msleep(5);
+
+ /*
+ * Not all devices have int_in defined
+ */
+ if (!dev->int_in.endp)
+ return 0;
+
+ err = usb_set_interface(dev->udev, dev->isoc_in.bInterfaceNumber, 2);
+ if (err < 0) {
+ tm6000_err("failed to select interface %d, alt. setting 2\n",
+ dev->isoc_in.bInterfaceNumber);
+ return err;
+ }
+
+ msleep(5);
+
+ pipe = usb_rcvintpipe(dev->udev,
+ dev->int_in.endp->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+
+ err = usb_clear_halt(dev->udev, pipe);
+ if (err < 0) {
+ tm6000_err("usb_clear_halt failed: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
+{
+ int val = 0;
+ u8 areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
+ u8 areg_0a = 0x91; /* SIF 48KHz */
+
+ switch (bitrate) {
+ case 48000:
+ areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
+ areg_0a = 0x91; /* SIF 48KHz */
+ dev->audio_bitrate = bitrate;
+ break;
+ case 32000:
+ areg_f0 = 0x00; /* ADC MCLK = 375 Fs */
+ areg_0a = 0x90; /* SIF 32KHz */
+ dev->audio_bitrate = bitrate;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ /* enable I2S, if we use sif or external I2S device */
+ if (dev->dev_type == TM6010) {
+ val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, areg_0a);
+ if (val < 0)
+ return val;
+
+ val = tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+ areg_f0, 0xf0);
+ if (val < 0)
+ return val;
+ } else {
+ val = tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
+ areg_f0, 0xf0);
+ if (val < 0)
+ return val;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
+
+int tm6000_set_audio_rinput(struct tm6000_core *dev)
+{
+ if (dev->dev_type == TM6010) {
+ /* Audio crossbar setting, default SIF1 */
+ u8 areg_f0;
+
+ switch (dev->rinput.amux) {
+ case TM6000_AMUX_SIF1:
+ case TM6000_AMUX_SIF2:
+ areg_f0 = 0x03;
+ break;
+ case TM6000_AMUX_ADC1:
+ areg_f0 = 0x00;
+ break;
+ case TM6000_AMUX_ADC2:
+ areg_f0 = 0x08;
+ break;
+ case TM6000_AMUX_I2S:
+ areg_f0 = 0x04;
+ break;
+ default:
+ printk(KERN_INFO "%s: audio input dosn't support\n",
+ dev->name);
+ return 0;
+ break;
+ }
+ /* Set audio input crossbar */
+ tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+ areg_f0, 0x0f);
+ } else {
+ u8 areg_eb;
+ /* Audio setting, default LINE1 */
+ switch (dev->rinput.amux) {
+ case TM6000_AMUX_ADC1:
+ areg_eb = 0x00;
+ break;
+ case TM6000_AMUX_ADC2:
+ areg_eb = 0x04;
+ break;
+ default:
+ printk(KERN_INFO "%s: audio input dosn't support\n",
+ dev->name);
+ return 0;
+ break;
+ }
+ /* Set audio input */
+ tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
+ areg_eb, 0x0f);
+ }
+ return 0;
+}
+
+static void tm6010_set_mute_sif(struct tm6000_core *dev, u8 mute)
+{
+ u8 mute_reg = 0;
+
+ if (mute)
+ mute_reg = 0x08;
+
+ tm6000_set_reg_mask(dev, TM6010_REQ08_R0A_A_I2S_MOD, mute_reg, 0x08);
+}
+
+static void tm6010_set_mute_adc(struct tm6000_core *dev, u8 mute)
+{
+ u8 mute_reg = 0;
+
+ if (mute)
+ mute_reg = 0x20;
+
+ if (dev->dev_type == TM6010) {
+ tm6000_set_reg_mask(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL,
+ mute_reg, 0x20);
+ tm6000_set_reg_mask(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL,
+ mute_reg, 0x20);
+ } else {
+ tm6000_set_reg_mask(dev, TM6000_REQ07_REC_VADC_AADC_LVOL,
+ mute_reg, 0x20);
+ tm6000_set_reg_mask(dev, TM6000_REQ07_RED_VADC_AADC_RVOL,
+ mute_reg, 0x20);
+ }
+}
+
+int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute)
+{
+ enum tm6000_mux mux;
+
+ if (dev->radio)
+ mux = dev->rinput.amux;
+ else
+ mux = dev->vinput[dev->input].amux;
+
+ switch (mux) {
+ case TM6000_AMUX_SIF1:
+ case TM6000_AMUX_SIF2:
+ if (dev->dev_type == TM6010)
+ tm6010_set_mute_sif(dev, mute);
+ else {
+ printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
+ " SIF audio inputs. Please check the %s"
+ " configuration.\n", dev->name);
+ return -EINVAL;
+ }
+ break;
+ case TM6000_AMUX_ADC1:
+ case TM6000_AMUX_ADC2:
+ tm6010_set_mute_adc(dev, mute);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ return 0;
+}
+
+static void tm6010_set_volume_sif(struct tm6000_core *dev, int vol)
+{
+ u8 vol_reg;
+
+ vol_reg = vol & 0x0F;
+
+ if (vol < 0)
+ vol_reg |= 0x40;
+
+ tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, vol_reg);
+ tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, vol_reg);
+}
+
+static void tm6010_set_volume_adc(struct tm6000_core *dev, int vol)
+{
+ u8 vol_reg;
+
+ vol_reg = (vol + 0x10) & 0x1f;
+
+ if (dev->dev_type == TM6010) {
+ tm6000_set_reg(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, vol_reg);
+ tm6000_set_reg(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, vol_reg);
+ } else {
+ tm6000_set_reg(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, vol_reg);
+ tm6000_set_reg(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, vol_reg);
+ }
+}
+
+void tm6000_set_volume(struct tm6000_core *dev, int vol)
+{
+ enum tm6000_mux mux;
+
+ if (dev->radio) {
+ mux = dev->rinput.amux;
+ vol += 8; /* Offset to 0 dB */
+ } else
+ mux = dev->vinput[dev->input].amux;
+
+ switch (mux) {
+ case TM6000_AMUX_SIF1:
+ case TM6000_AMUX_SIF2:
+ if (dev->dev_type == TM6010)
+ tm6010_set_volume_sif(dev, vol);
+ else
+ printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
+ " SIF audio inputs. Please check the %s"
+ " configuration.\n", dev->name);
+ break;
+ case TM6000_AMUX_ADC1:
+ case TM6000_AMUX_ADC2:
+ tm6010_set_volume_adc(dev, vol);
+ break;
+ default:
+ break;
+ }
+}
+
+static LIST_HEAD(tm6000_devlist);
+static DEFINE_MUTEX(tm6000_devlist_mutex);
+
+/*
+ * tm6000_realease_resource()
+ */
+
+void tm6000_remove_from_devlist(struct tm6000_core *dev)
+{
+ mutex_lock(&tm6000_devlist_mutex);
+ list_del(&dev->devlist);
+ mutex_unlock(&tm6000_devlist_mutex);
+};
+
+void tm6000_add_into_devlist(struct tm6000_core *dev)
+{
+ mutex_lock(&tm6000_devlist_mutex);
+ list_add_tail(&dev->devlist, &tm6000_devlist);
+ mutex_unlock(&tm6000_devlist_mutex);
+};
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(tm6000_extension_devlist);
+
+int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
+ char *buf, int size)
+{
+ struct tm6000_ops *ops = NULL;
+
+ /* FIXME: tm6000_extension_devlist_lock should be a spinlock */
+
+ if (!list_empty(&tm6000_extension_devlist)) {
+ list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+ if (ops->fillbuf && ops->type == type)
+ ops->fillbuf(dev, buf, size);
+ }
+ }
+
+ return 0;
+}
+
+int tm6000_register_extension(struct tm6000_ops *ops)
+{
+ struct tm6000_core *dev = NULL;
+
+ mutex_lock(&tm6000_devlist_mutex);
+ list_add_tail(&ops->next, &tm6000_extension_devlist);
+ list_for_each_entry(dev, &tm6000_devlist, devlist) {
+ ops->init(dev);
+ printk(KERN_INFO "%s: Initialized (%s) extension\n",
+ dev->name, ops->name);
+ }
+ mutex_unlock(&tm6000_devlist_mutex);
+ return 0;
+}
+EXPORT_SYMBOL(tm6000_register_extension);
+
+void tm6000_unregister_extension(struct tm6000_ops *ops)
+{
+ struct tm6000_core *dev = NULL;
+
+ mutex_lock(&tm6000_devlist_mutex);
+ list_for_each_entry(dev, &tm6000_devlist, devlist)
+ ops->fini(dev);
+
+ printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name);
+ list_del(&ops->next);
+ mutex_unlock(&tm6000_devlist_mutex);
+}
+EXPORT_SYMBOL(tm6000_unregister_extension);
+
+void tm6000_init_extension(struct tm6000_core *dev)
+{
+ struct tm6000_ops *ops = NULL;
+
+ mutex_lock(&tm6000_devlist_mutex);
+ if (!list_empty(&tm6000_extension_devlist)) {
+ list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+ if (ops->init)
+ ops->init(dev);
+ }
+ }
+ mutex_unlock(&tm6000_devlist_mutex);
+}
+
+void tm6000_close_extension(struct tm6000_core *dev)
+{
+ struct tm6000_ops *ops = NULL;
+
+ mutex_lock(&tm6000_devlist_mutex);
+ if (!list_empty(&tm6000_extension_devlist)) {
+ list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+ if (ops->fini)
+ ops->fini(dev);
+ }
+ }
+ mutex_unlock(&tm6000_devlist_mutex);
+}
diff --git a/drivers/media/video/tm6000/tm6000-dvb.c b/drivers/media/video/tm6000/tm6000-dvb.c
new file mode 100644
index 0000000..5e6c129
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-dvb.c
@@ -0,0 +1,452 @@
+/*
+ * tm6000-dvb.c - dvb-t support for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+#include "zl10353.h"
+
+#include <media/tuner.h>
+
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+
+MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},"
+ "{{Trident, tm6000},"
+ "{{Trident, tm6010}");
+
+static int debug;
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug message");
+
+static inline void print_err_status(struct tm6000_core *dev,
+ int packet, int status)
+{
+ char *errmsg = "Unknown";
+
+ switch (status) {
+ case -ENOENT:
+ errmsg = "unlinked synchronuously";
+ break;
+ case -ECONNRESET:
+ errmsg = "unlinked asynchronuously";
+ break;
+ case -ENOSR:
+ errmsg = "Buffer error (overrun)";
+ break;
+ case -EPIPE:
+ errmsg = "Stalled (device not responding)";
+ break;
+ case -EOVERFLOW:
+ errmsg = "Babble (bad cable?)";
+ break;
+ case -EPROTO:
+ errmsg = "Bit-stuff error (bad cable?)";
+ break;
+ case -EILSEQ:
+ errmsg = "CRC/Timeout (could be anything)";
+ break;
+ case -ETIME:
+ errmsg = "Device does not respond";
+ break;
+ }
+ if (packet < 0) {
+ dprintk(dev, 1, "URB status %d [%s].\n",
+ status, errmsg);
+ } else {
+ dprintk(dev, 1, "URB packet %d, status %d [%s].\n",
+ packet, status, errmsg);
+ }
+}
+
+static void tm6000_urb_received(struct urb *urb)
+{
+ int ret;
+ struct tm6000_core *dev = urb->context;
+
+ if (urb->status != 0)
+ print_err_status(dev, 0, urb->status);
+ else if (urb->actual_length > 0)
+ dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer,
+ urb->actual_length);
+
+ if (dev->dvb->streams > 0) {
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret < 0) {
+ printk(KERN_ERR "tm6000: error %s\n", __func__);
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+ }
+ }
+}
+
+static int tm6000_start_stream(struct tm6000_core *dev)
+{
+ int ret;
+ unsigned int pipe, size;
+ struct tm6000_dvb *dvb = dev->dvb;
+
+ printk(KERN_INFO "tm6000: got start stream request %s\n", __func__);
+
+ if (dev->mode != TM6000_MODE_DIGITAL) {
+ tm6000_init_digital_mode(dev);
+ dev->mode = TM6000_MODE_DIGITAL;
+ }
+
+ dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (dvb->bulk_urb == NULL) {
+ printk(KERN_ERR "tm6000: couldn't allocate urb\n");
+ return -ENOMEM;
+ }
+
+ pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+ size = size * 15; /* 512 x 8 or 12 or 15 */
+
+ dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+ if (dvb->bulk_urb->transfer_buffer == NULL) {
+ usb_free_urb(dvb->bulk_urb);
+ printk(KERN_ERR "tm6000: couldn't allocate transfer buffer!\n");
+ return -ENOMEM;
+ }
+
+ usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe,
+ dvb->bulk_urb->transfer_buffer,
+ size,
+ tm6000_urb_received, dev);
+
+ ret = usb_clear_halt(dev->udev, pipe);
+ if (ret < 0) {
+ printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n",
+ ret, __func__);
+ return ret;
+ } else
+ printk(KERN_ERR "tm6000: pipe resetted\n");
+
+/* mutex_lock(&tm6000_driver.open_close_mutex); */
+ ret = usb_submit_urb(dvb->bulk_urb, GFP_KERNEL);
+
+/* mutex_unlock(&tm6000_driver.open_close_mutex); */
+ if (ret) {
+ printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n",
+ ret);
+
+ kfree(dvb->bulk_urb->transfer_buffer);
+ usb_free_urb(dvb->bulk_urb);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void tm6000_stop_stream(struct tm6000_core *dev)
+{
+ struct tm6000_dvb *dvb = dev->dvb;
+
+ if (dvb->bulk_urb) {
+ printk(KERN_INFO "urb killing\n");
+ usb_kill_urb(dvb->bulk_urb);
+ printk(KERN_INFO "urb buffer free\n");
+ kfree(dvb->bulk_urb->transfer_buffer);
+ usb_free_urb(dvb->bulk_urb);
+ dvb->bulk_urb = NULL;
+ }
+}
+
+static int tm6000_start_feed(struct dvb_demux_feed *feed)
+{
+ struct dvb_demux *demux = feed->demux;
+ struct tm6000_core *dev = demux->priv;
+ struct tm6000_dvb *dvb = dev->dvb;
+ printk(KERN_INFO "tm6000: got start feed request %s\n", __func__);
+
+ mutex_lock(&dvb->mutex);
+ if (dvb->streams == 0) {
+ dvb->streams = 1;
+/* mutex_init(&tm6000_dev->streming_mutex); */
+ tm6000_start_stream(dev);
+ } else
+ ++(dvb->streams);
+ mutex_unlock(&dvb->mutex);
+
+ return 0;
+}
+
+static int tm6000_stop_feed(struct dvb_demux_feed *feed)
+{
+ struct dvb_demux *demux = feed->demux;
+ struct tm6000_core *dev = demux->priv;
+ struct tm6000_dvb *dvb = dev->dvb;
+
+ printk(KERN_INFO "tm6000: got stop feed request %s\n", __func__);
+
+ mutex_lock(&dvb->mutex);
+
+ printk(KERN_INFO "stream %#x\n", dvb->streams);
+ --(dvb->streams);
+ if (dvb->streams == 0) {
+ printk(KERN_INFO "stop stream\n");
+ tm6000_stop_stream(dev);
+/* mutex_destroy(&tm6000_dev->streaming_mutex); */
+ }
+ mutex_unlock(&dvb->mutex);
+/* mutex_destroy(&tm6000_dev->streaming_mutex); */
+
+ return 0;
+}
+
+static int tm6000_dvb_attach_frontend(struct tm6000_core *dev)
+{
+ struct tm6000_dvb *dvb = dev->dvb;
+
+ if (dev->caps.has_zl10353) {
+ struct zl10353_config config = {
+ .demod_address = dev->demod_addr,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .if2 = 45700,
+ .disable_i2c_gate_ctrl = 1,
+ };
+
+ dvb->frontend = dvb_attach(zl10353_attach, &config,
+ &dev->i2c_adap);
+ } else {
+ printk(KERN_ERR "tm6000: no frontend defined for the device!\n");
+ return -1;
+ }
+
+ return (!dvb->frontend) ? -1 : 0;
+}
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int register_dvb(struct tm6000_core *dev)
+{
+ int ret = -1;
+ struct tm6000_dvb *dvb = dev->dvb;
+
+ mutex_init(&dvb->mutex);
+
+ dvb->streams = 0;
+
+ /* attach the frontend */
+ ret = tm6000_dvb_attach_frontend(dev);
+ if (ret < 0) {
+ printk(KERN_ERR "tm6000: couldn't attach the frontend!\n");
+ goto err;
+ }
+
+ ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T",
+ THIS_MODULE, &dev->udev->dev, adapter_nr);
+ dvb->adapter.priv = dev;
+
+ if (dvb->frontend) {
+ switch (dev->tuner_type) {
+ case TUNER_XC2028: {
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_adap,
+ .i2c_addr = dev->tuner_addr,
+ };
+
+ dvb->frontend->callback = tm6000_tuner_callback;
+ ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "tm6000: couldn't register frontend\n");
+ goto adapter_err;
+ }
+
+ if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
+ printk(KERN_ERR "tm6000: couldn't register "
+ "frontend (xc3028)\n");
+ ret = -EINVAL;
+ goto frontend_err;
+ }
+ printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
+ "attached to frontend!\n");
+ break;
+ }
+ case TUNER_XC5000: {
+ struct xc5000_config cfg = {
+ .i2c_address = dev->tuner_addr,
+ };
+
+ dvb->frontend->callback = tm6000_xc5000_callback;
+ ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "tm6000: couldn't register frontend\n");
+ goto adapter_err;
+ }
+
+ if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
+ printk(KERN_ERR "tm6000: couldn't register "
+ "frontend (xc5000)\n");
+ ret = -EINVAL;
+ goto frontend_err;
+ }
+ printk(KERN_INFO "tm6000: XC5000 asked to be "
+ "attached to frontend!\n");
+ break;
+ }
+ }
+ } else
+ printk(KERN_ERR "tm6000: no frontend found\n");
+
+ dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING
+ | DMX_MEMORY_BASED_FILTERING;
+ dvb->demux.priv = dev;
+ dvb->demux.filternum = 8;
+ dvb->demux.feednum = 8;
+ dvb->demux.start_feed = tm6000_start_feed;
+ dvb->demux.stop_feed = tm6000_stop_feed;
+ dvb->demux.write_to_decoder = NULL;
+ ret = dvb_dmx_init(&dvb->demux);
+ if (ret < 0) {
+ printk(KERN_ERR "tm6000: dvb_dmx_init failed (errno = %d)\n", ret);
+ goto frontend_err;
+ }
+
+ dvb->dmxdev.filternum = dev->dvb->demux.filternum;
+ dvb->dmxdev.demux = &dev->dvb->demux.dmx;
+ dvb->dmxdev.capabilities = 0;
+
+ ret = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
+ if (ret < 0) {
+ printk(KERN_ERR "tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret);
+ goto dvb_dmx_err;
+ }
+
+ return 0;
+
+dvb_dmx_err:
+ dvb_dmx_release(&dvb->demux);
+frontend_err:
+ if (dvb->frontend) {
+ dvb_frontend_detach(dvb->frontend);
+ dvb_unregister_frontend(dvb->frontend);
+ }
+adapter_err:
+ dvb_unregister_adapter(&dvb->adapter);
+err:
+ return ret;
+}
+
+static void unregister_dvb(struct tm6000_core *dev)
+{
+ struct tm6000_dvb *dvb = dev->dvb;
+
+ if (dvb->bulk_urb != NULL) {
+ struct urb *bulk_urb = dvb->bulk_urb;
+
+ kfree(bulk_urb->transfer_buffer);
+ bulk_urb->transfer_buffer = NULL;
+ usb_unlink_urb(bulk_urb);
+ usb_free_urb(bulk_urb);
+ }
+
+/* mutex_lock(&tm6000_driver.open_close_mutex); */
+ if (dvb->frontend) {
+ dvb_frontend_detach(dvb->frontend);
+ dvb_unregister_frontend(dvb->frontend);
+ }
+
+ dvb_dmxdev_release(&dvb->dmxdev);
+ dvb_dmx_release(&dvb->demux);
+ dvb_unregister_adapter(&dvb->adapter);
+ mutex_destroy(&dvb->mutex);
+/* mutex_unlock(&tm6000_driver.open_close_mutex); */
+}
+
+static int dvb_init(struct tm6000_core *dev)
+{
+ struct tm6000_dvb *dvb;
+ int rc;
+
+ if (!dev)
+ return 0;
+
+ if (!dev->caps.has_dvb)
+ return 0;
+
+ dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL);
+ if (!dvb) {
+ printk(KERN_INFO "Cannot allocate memory\n");
+ return -ENOMEM;
+ }
+
+ dev->dvb = dvb;
+
+ rc = register_dvb(dev);
+ if (rc < 0) {
+ kfree(dvb);
+ dev->dvb = NULL;
+ return 0;
+ }
+
+ return 0;
+}
+
+static int dvb_fini(struct tm6000_core *dev)
+{
+ if (!dev)
+ return 0;
+
+ if (!dev->caps.has_dvb)
+ return 0;
+
+ if (dev->dvb) {
+ unregister_dvb(dev);
+ kfree(dev->dvb);
+ dev->dvb = NULL;
+ }
+
+ return 0;
+}
+
+static struct tm6000_ops dvb_ops = {
+ .type = TM6000_DVB,
+ .name = "TM6000 dvb Extension",
+ .init = dvb_init,
+ .fini = dvb_fini,
+};
+
+static int __init tm6000_dvb_register(void)
+{
+ return tm6000_register_extension(&dvb_ops);
+}
+
+static void __exit tm6000_dvb_unregister(void)
+{
+ tm6000_unregister_extension(&dvb_ops);
+}
+
+module_init(tm6000_dvb_register);
+module_exit(tm6000_dvb_unregister);
diff --git a/drivers/media/video/tm6000/tm6000-i2c.c b/drivers/media/video/tm6000/tm6000-i2c.c
new file mode 100644
index 0000000..0290bbf
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-i2c.c
@@ -0,0 +1,340 @@
+/*
+ * tm6000-i2c.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ * - Fix SMBus Read Byte command
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include "tuner-xc2028.h"
+
+
+/* ----------------------------------------------------------- */
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define i2c_dprintk(lvl, fmt, args...) if (i2c_debug >= lvl) do { \
+ printk(KERN_DEBUG "%s at %s: " fmt, \
+ dev->name, __func__, ##args); } while (0)
+
+static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr,
+ __u8 reg, char *buf, int len)
+{
+ int rc;
+ unsigned int tsleep;
+ unsigned int i2c_packet_limit = 16;
+
+ if (dev->dev_type == TM6010)
+ i2c_packet_limit = 64;
+
+ if (!buf)
+ return -1;
+
+ if (len < 1 || len > i2c_packet_limit) {
+ printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
+ len, i2c_packet_limit);
+ return -1;
+ }
+
+ /* capture mutex */
+ rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
+ addr | reg << 8, 0, buf, len);
+
+ if (rc < 0) {
+ /* release mutex */
+ return rc;
+ }
+
+ /* Calculate delay time, 14000us for 64 bytes */
+ tsleep = ((len * 200) + 200 + 1000) / 1000;
+ msleep(tsleep);
+
+ /* release mutex */
+ return rc;
+}
+
+/* Generic read - doesn't work fine with 16bit registers */
+static int tm6000_i2c_recv_regs(struct tm6000_core *dev, unsigned char addr,
+ __u8 reg, char *buf, int len)
+{
+ int rc;
+ u8 b[2];
+ unsigned int i2c_packet_limit = 16;
+
+ if (dev->dev_type == TM6010)
+ i2c_packet_limit = 64;
+
+ if (!buf)
+ return -1;
+
+ if (len < 1 || len > i2c_packet_limit) {
+ printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
+ len, i2c_packet_limit);
+ return -1;
+ }
+
+ /* capture mutex */
+ if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg % 2 == 0)) {
+ /*
+ * Workaround an I2C bug when reading from zl10353
+ */
+ reg -= 1;
+ len += 1;
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len);
+
+ *buf = b[1];
+ } else {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
+ }
+
+ /* release mutex */
+ return rc;
+}
+
+/*
+ * read from a 16bit register
+ * for example xc2028, xc3028 or xc3028L
+ */
+static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char addr,
+ __u16 reg, char *buf, int len)
+{
+ int rc;
+ unsigned char ureg;
+
+ if (!buf || len != 2)
+ return -1;
+
+ /* capture mutex */
+ if (dev->dev_type == TM6010) {
+ ureg = reg & 0xFF;
+ rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
+ addr | (reg & 0xFF00), 0, &ureg, 1);
+
+ if (rc < 0) {
+ /* release mutex */
+ return rc;
+ }
+
+ msleep(1400 / 1000);
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ,
+ reg, 0, buf, len);
+ } else {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN,
+ addr, reg, buf, len);
+ }
+
+ /* release mutex */
+ return rc;
+}
+
+static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct tm6000_core *dev = i2c_adap->algo_data;
+ int addr, rc, i, byte;
+
+ if (num <= 0)
+ return 0;
+ for (i = 0; i < num; i++) {
+ addr = (msgs[i].addr << 1) & 0xff;
+ i2c_dprintk(2, "%s %s addr=0x%x len=%d:",
+ (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+ i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
+ if (msgs[i].flags & I2C_M_RD) {
+ /* read request without preceding register selection */
+ /*
+ * The TM6000 only supports a read transaction
+ * immediately after a 1 or 2 byte write to select
+ * a register. We cannot fulfil this request.
+ */
+ i2c_dprintk(2, " read without preceding write not"
+ " supported");
+ rc = -EOPNOTSUPP;
+ goto err;
+ } else if (i + 1 < num && msgs[i].len <= 2 &&
+ (msgs[i + 1].flags & I2C_M_RD) &&
+ msgs[i].addr == msgs[i + 1].addr) {
+ /* 1 or 2 byte write followed by a read */
+ if (i2c_debug >= 2)
+ for (byte = 0; byte < msgs[i].len; byte++)
+ printk(KERN_CONT " %02x", msgs[i].buf[byte]);
+ i2c_dprintk(2, "; joined to read %s len=%d:",
+ i == num - 2 ? "stop" : "nonstop",
+ msgs[i + 1].len);
+
+ if (msgs[i].len == 2) {
+ rc = tm6000_i2c_recv_regs16(dev, addr,
+ msgs[i].buf[0] << 8 | msgs[i].buf[1],
+ msgs[i + 1].buf, msgs[i + 1].len);
+ } else {
+ rc = tm6000_i2c_recv_regs(dev, addr, msgs[i].buf[0],
+ msgs[i + 1].buf, msgs[i + 1].len);
+ }
+
+ i++;
+
+ if (addr == dev->tuner_addr << 1) {
+ tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+ tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+ }
+ if (i2c_debug >= 2)
+ for (byte = 0; byte < msgs[i].len; byte++)
+ printk(KERN_CONT " %02x", msgs[i].buf[byte]);
+ } else {
+ /* write bytes */
+ if (i2c_debug >= 2)
+ for (byte = 0; byte < msgs[i].len; byte++)
+ printk(KERN_CONT " %02x", msgs[i].buf[byte]);
+ rc = tm6000_i2c_send_regs(dev, addr, msgs[i].buf[0],
+ msgs[i].buf + 1, msgs[i].len - 1);
+ }
+ if (i2c_debug >= 2)
+ printk(KERN_CONT "\n");
+ if (rc < 0)
+ goto err;
+ }
+
+ return num;
+err:
+ i2c_dprintk(2, " ERROR: %i\n", rc);
+ return rc;
+}
+
+static int tm6000_i2c_eeprom(struct tm6000_core *dev)
+{
+ int i, rc;
+ unsigned char *p = dev->eedata;
+ unsigned char bytes[17];
+
+ dev->i2c_client.addr = 0xa0 >> 1;
+ dev->eedata_size = 0;
+
+ bytes[16] = '\0';
+ for (i = 0; i < sizeof(dev->eedata); ) {
+ *p = i;
+ rc = tm6000_i2c_recv_regs(dev, 0xa0, i, p, 1);
+ if (rc < 1) {
+ if (p == dev->eedata)
+ goto noeeprom;
+ else {
+ printk(KERN_WARNING
+ "%s: i2c eeprom read error (err=%d)\n",
+ dev->name, rc);
+ }
+ return -EINVAL;
+ }
+ dev->eedata_size++;
+ p++;
+ if (0 == (i % 16))
+ printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
+ printk(KERN_CONT " %02x", dev->eedata[i]);
+ if ((dev->eedata[i] >= ' ') && (dev->eedata[i] <= 'z'))
+ bytes[i%16] = dev->eedata[i];
+ else
+ bytes[i%16] = '.';
+
+ i++;
+
+ if (0 == (i % 16)) {
+ bytes[16] = '\0';
+ printk(KERN_CONT " %s\n", bytes);
+ }
+ }
+ if (0 != (i%16)) {
+ bytes[i%16] = '\0';
+ for (i %= 16; i < 16; i++)
+ printk(KERN_CONT " ");
+ printk(KERN_CONT " %s\n", bytes);
+ }
+
+ return 0;
+
+noeeprom:
+ printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
+ dev->name, rc);
+ return -EINVAL;
+}
+
+/* ----------------------------------------------------------- */
+
+/*
+ * functionality()
+ */
+static u32 functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm tm6000_algo = {
+ .master_xfer = tm6000_i2c_xfer,
+ .functionality = functionality,
+};
+
+/* ----------------------------------------------------------- */
+
+/*
+ * tm6000_i2c_register()
+ * register i2c bus
+ */
+int tm6000_i2c_register(struct tm6000_core *dev)
+{
+ int rc;
+
+ dev->i2c_adap.owner = THIS_MODULE;
+ dev->i2c_adap.algo = &tm6000_algo;
+ dev->i2c_adap.dev.parent = &dev->udev->dev;
+ strlcpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name));
+ dev->i2c_adap.algo_data = dev;
+ i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+ rc = i2c_add_adapter(&dev->i2c_adap);
+ if (rc)
+ return rc;
+
+ dev->i2c_client.adapter = &dev->i2c_adap;
+ strlcpy(dev->i2c_client.name, "tm6000 internal", I2C_NAME_SIZE);
+ tm6000_i2c_eeprom(dev);
+
+ return 0;
+}
+
+/*
+ * tm6000_i2c_unregister()
+ * unregister i2c_bus
+ */
+int tm6000_i2c_unregister(struct tm6000_core *dev)
+{
+ i2c_del_adapter(&dev->i2c_adap);
+ return 0;
+}
diff --git a/drivers/media/video/tm6000/tm6000-input.c b/drivers/media/video/tm6000/tm6000-input.c
new file mode 100644
index 0000000..405d127
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-input.c
@@ -0,0 +1,459 @@
+/*
+ * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <linux/input.h>
+#include <linux/usb.h>
+
+#include <media/rc-core.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+static unsigned int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debug message [IR]");
+
+static unsigned int enable_ir = 1;
+module_param(enable_ir, int, 0644);
+MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
+
+/* number of 50ms for ON-OFF-ON power led */
+/* show IR activity */
+#define PWLED_OFF 2
+
+#undef dprintk
+
+#define dprintk(fmt, arg...) \
+ if (ir_debug) { \
+ printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
+ }
+
+struct tm6000_ir_poll_result {
+ u16 rc_data;
+};
+
+struct tm6000_IR {
+ struct tm6000_core *dev;
+ struct rc_dev *rc;
+ char name[32];
+ char phys[32];
+
+ /* poll expernal decoder */
+ int polling;
+ struct delayed_work work;
+ u8 wait:1;
+ u8 key:1;
+ u8 pwled:1;
+ u8 pwledcnt;
+ u16 key_addr;
+ struct urb *int_urb;
+ u8 *urb_data;
+
+ int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
+
+ /* IR device properties */
+ u64 rc_type;
+};
+
+
+void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
+{
+ struct tm6000_IR *ir = dev->ir;
+
+ if (!dev->ir)
+ return;
+
+ if (state)
+ ir->wait = 1;
+ else
+ ir->wait = 0;
+}
+
+
+static int tm6000_ir_config(struct tm6000_IR *ir)
+{
+ struct tm6000_core *dev = ir->dev;
+ u8 buf[10];
+ int rc;
+
+ switch (ir->rc_type) {
+ case RC_TYPE_NEC:
+ /* Setup IR decoder for NEC standard 12MHz system clock */
+ /* IR_LEADER_CNT = 0.9ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
+ /* IR_PULSE_CNT = 0.7ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
+ /* Remote WAKEUP = enable */
+ tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+ /* IR_WKUP_SEL = Low byte in decoded IR data */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
+ /* IR_WKU_ADD code */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
+ tm6000_flash_led(dev, 0);
+ msleep(100);
+ tm6000_flash_led(dev, 1);
+ break;
+ default:
+ /* hack */
+ buf[0] = 0xff;
+ buf[1] = 0xff;
+ buf[2] = 0xf2;
+ buf[3] = 0x2b;
+ buf[4] = 0x20;
+ buf[5] = 0x35;
+ buf[6] = 0x60;
+ buf[7] = 0x04;
+ buf[8] = 0xc0;
+ buf[9] = 0x08;
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
+ msleep(100);
+
+ if (rc < 0) {
+ printk(KERN_INFO "IR configuration failed");
+ return rc;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static void tm6000_ir_urb_received(struct urb *urb)
+{
+ struct tm6000_core *dev = urb->context;
+ struct tm6000_IR *ir = dev->ir;
+ int rc;
+
+ if (urb->status != 0)
+ printk(KERN_INFO "not ready\n");
+ else if (urb->actual_length > 0) {
+ memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
+
+ dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
+ ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+
+ ir->key = 1;
+ }
+
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static int default_polling_getkey(struct tm6000_IR *ir,
+ struct tm6000_ir_poll_result *poll_result)
+{
+ struct tm6000_core *dev = ir->dev;
+ int rc;
+ u8 buf[2];
+
+ if (ir->wait && !&dev->int_in)
+ return 0;
+
+ if (&dev->int_in) {
+ switch (ir->rc_type) {
+ case RC_TYPE_RC5:
+ poll_result->rc_data = ir->urb_data[0];
+ break;
+ case RC_TYPE_NEC:
+ if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) {
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ }
+ break;
+ default:
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ break;
+ }
+ } else {
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+ msleep(10);
+ tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
+ msleep(10);
+
+ if (ir->rc_type == RC_TYPE_RC5) {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 1);
+
+ msleep(10);
+
+ dprintk("read data=%02x\n", buf[0]);
+ if (rc < 0)
+ return rc;
+
+ poll_result->rc_data = buf[0];
+ } else {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+
+ msleep(10);
+
+ dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
+ if (rc < 0)
+ return rc;
+
+ poll_result->rc_data = buf[0] | buf[1] << 8;
+ }
+ if ((poll_result->rc_data & 0x00ff) != 0xff)
+ ir->key = 1;
+ }
+ return 0;
+}
+
+static void tm6000_ir_handle_key(struct tm6000_IR *ir)
+{
+ struct tm6000_core *dev = ir->dev;
+ int result;
+ struct tm6000_ir_poll_result poll_result;
+
+ /* read the registers containing the IR status */
+ result = ir->get_key(ir, &poll_result);
+ if (result < 0) {
+ printk(KERN_INFO "ir->get_key() failed %d\n", result);
+ return;
+ }
+
+ dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
+
+ if (ir->pwled) {
+ if (ir->pwledcnt >= PWLED_OFF) {
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 1);
+ } else
+ ir->pwledcnt += 1;
+ }
+
+ if (ir->key) {
+ rc_keydown(ir->rc, poll_result.rc_data, 0);
+ ir->key = 0;
+ ir->pwled = 1;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 0);
+ }
+ return;
+}
+
+static void tm6000_ir_work(struct work_struct *work)
+{
+ struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
+
+ tm6000_ir_handle_key(ir);
+ schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
+}
+
+static int tm6000_ir_start(struct rc_dev *rc)
+{
+ struct tm6000_IR *ir = rc->priv;
+
+ INIT_DELAYED_WORK(&ir->work, tm6000_ir_work);
+ schedule_delayed_work(&ir->work, 0);
+
+ return 0;
+}
+
+static void tm6000_ir_stop(struct rc_dev *rc)
+{
+ struct tm6000_IR *ir = rc->priv;
+
+ cancel_delayed_work_sync(&ir->work);
+}
+
+static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
+{
+ struct tm6000_IR *ir = rc->priv;
+
+ if (!ir)
+ return 0;
+
+ if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+ ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
+
+ ir->get_key = default_polling_getkey;
+ ir->rc_type = rc_type;
+
+ tm6000_ir_config(ir);
+ /* TODO */
+ return 0;
+}
+
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+ int pipe, size;
+ int err = -ENOMEM;
+
+
+ if (!ir)
+ return -ENODEV;
+
+ ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ir->int_urb)
+ return -ENOMEM;
+
+ pipe = usb_rcvintpipe(dev->udev,
+ dev->int_in.endp->desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+ dprintk("IR max size: %d\n", size);
+
+ ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+ if (ir->int_urb->transfer_buffer == NULL) {
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
+ usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+ ir->int_urb->transfer_buffer, size,
+ tm6000_ir_urb_received, dev,
+ dev->int_in.endp->desc.bInterval);
+ err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
+ if (err) {
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ ir->urb_data = kzalloc(size, GFP_KERNEL);
+
+ return 0;
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+
+ if (!ir)
+ return;
+
+ usb_kill_urb(ir->int_urb);
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ ir->int_urb = NULL;
+ kfree(ir->urb_data);
+ ir->urb_data = NULL;
+}
+
+int tm6000_ir_init(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir;
+ struct rc_dev *rc;
+ int err = -ENOMEM;
+
+ if (!enable_ir)
+ return -ENODEV;
+
+ if (!dev->caps.has_remote)
+ return 0;
+
+ if (!dev->ir_codes)
+ return 0;
+
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ rc = rc_allocate_device();
+ if (!ir || !rc)
+ goto out;
+
+ /* record handles to ourself */
+ ir->dev = dev;
+ dev->ir = ir;
+ ir->rc = rc;
+
+ /* input einrichten */
+ rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+ rc->priv = ir;
+ rc->change_protocol = tm6000_ir_change_protocol;
+ rc->open = tm6000_ir_start;
+ rc->close = tm6000_ir_stop;
+ rc->driver_type = RC_DRIVER_SCANCODE;
+
+ ir->polling = 50;
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+
+
+ snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
+ dev->name);
+
+ usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
+ strlcat(ir->phys, "/input0", sizeof(ir->phys));
+
+ tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
+
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->input_id.bustype = BUS_USB;
+ rc->input_id.version = 1;
+ rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+ rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+ rc->map_name = dev->ir_codes;
+ rc->driver_name = "tm6000";
+ rc->dev.parent = &dev->udev->dev;
+
+ if (&dev->int_in) {
+ dprintk("IR over int\n");
+
+ err = tm6000_ir_int_start(dev);
+
+ if (err)
+ goto out;
+ }
+
+ /* ir register */
+ err = rc_register_device(rc);
+ if (err)
+ goto out;
+
+ return 0;
+
+out:
+ dev->ir = NULL;
+ rc_free_device(rc);
+ kfree(ir);
+ return err;
+}
+
+int tm6000_ir_fini(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+
+ /* skip detach on non attached board */
+
+ if (!ir)
+ return 0;
+
+ rc_unregister_device(ir->rc);
+
+ if (ir->int_urb)
+ tm6000_ir_int_stop(dev);
+
+ kfree(ir);
+ dev->ir = NULL;
+
+ return 0;
+}
diff --git a/drivers/media/video/tm6000/tm6000-regs.h b/drivers/media/video/tm6000/tm6000-regs.h
new file mode 100644
index 0000000..7f491b6
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-regs.h
@@ -0,0 +1,600 @@
+/*
+ * tm6000-regs.h - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Define TV Master TM5600/TM6000/TM6010 Request codes
+ */
+#define REQ_00_SET_IR_VALUE 0
+#define REQ_01_SET_WAKEUP_IRCODE 1
+#define REQ_02_GET_IR_CODE 2
+#define REQ_03_SET_GET_MCU_PIN 3
+#define REQ_04_EN_DISABLE_MCU_INT 4
+#define REQ_05_SET_GET_USBREG 5
+ /* Write: RegNum, Value, 0 */
+ /* Read : RegNum, Value, 1, RegStatus */
+#define REQ_06_SET_GET_USBREG_BIT 6
+#define REQ_07_SET_GET_AVREG 7
+ /* Write: RegNum, Value, 0 */
+ /* Read : RegNum, Value, 1, RegStatus */
+#define REQ_08_SET_GET_AVREG_BIT 8
+#define REQ_09_SET_GET_TUNER_FQ 9
+#define REQ_10_SET_TUNER_SYSTEM 10
+#define REQ_11_SET_EEPROM_ADDR 11
+#define REQ_12_SET_GET_EEPROMBYTE 12
+#define REQ_13_GET_EEPROM_SEQREAD 13
+#define REQ_14_SET_GET_I2C_WR2_RDN 14
+#define REQ_15_SET_GET_I2CBYTE 15
+ /* Write: Subaddr, Slave Addr, value, 0 */
+ /* Read : Subaddr, Slave Addr, value, 1 */
+#define REQ_16_SET_GET_I2C_WR1_RDN 16
+ /* Subaddr, Slave Addr, 0, length */
+#define REQ_17_SET_GET_I2CFP 17
+ /* Write: Slave Addr, register, value */
+ /* Read : Slave Addr, register, 2, data */
+#define REQ_20_DATA_TRANSFER 20
+#define REQ_30_I2C_WRITE 30
+#define REQ_31_I2C_READ 31
+#define REQ_35_AFTEK_TUNER_READ 35
+#define REQ_40_GET_VERSION 40
+#define REQ_50_SET_START 50
+#define REQ_51_SET_STOP 51
+#define REQ_52_TRANSMIT_DATA 52
+#define REQ_53_SPI_INITIAL 53
+#define REQ_54_SPI_SETSTART 54
+#define REQ_55_SPI_INOUTDATA 55
+#define REQ_56_SPI_SETSTOP 56
+
+/*
+ * Define TV Master TM5600/TM6000/TM6010 GPIO lines
+ */
+
+#define TM6000_GPIO_CLK 0x101
+#define TM6000_GPIO_DATA 0x100
+
+#define TM6000_GPIO_1 0x102
+#define TM6000_GPIO_2 0x103
+#define TM6000_GPIO_3 0x104
+#define TM6000_GPIO_4 0x300
+#define TM6000_GPIO_5 0x301
+#define TM6000_GPIO_6 0x304
+#define TM6000_GPIO_7 0x305
+
+/* tm6010 defines GPIO with different values */
+#define TM6010_GPIO_0 0x0102
+#define TM6010_GPIO_1 0x0103
+#define TM6010_GPIO_2 0x0104
+#define TM6010_GPIO_3 0x0105
+#define TM6010_GPIO_4 0x0106
+#define TM6010_GPIO_5 0x0107
+#define TM6010_GPIO_6 0x0300
+#define TM6010_GPIO_7 0x0301
+#define TM6010_GPIO_9 0x0305
+/*
+ * Define TV Master TM5600/TM6000/TM6010 URB message codes and length
+ */
+
+enum {
+ TM6000_URB_MSG_VIDEO = 1,
+ TM6000_URB_MSG_AUDIO,
+ TM6000_URB_MSG_VBI,
+ TM6000_URB_MSG_PTS,
+ TM6000_URB_MSG_ERR,
+};
+
+/* Define specific TM6000 Video decoder registers */
+#define TM6000_REQ07_RD8_TEST_SEL 0x07, 0xd8
+#define TM6000_REQ07_RD9_A_SIM_SEL 0x07, 0xd9
+#define TM6000_REQ07_RDA_CLK_SEL 0x07, 0xda
+#define TM6000_REQ07_RDB_OUT_SEL 0x07, 0xdb
+#define TM6000_REQ07_RDC_NSEL_I2S 0x07, 0xdc
+#define TM6000_REQ07_RDD_GPIO2_MDRV 0x07, 0xdd
+#define TM6000_REQ07_RDE_GPIO1_MDRV 0x07, 0xde
+#define TM6000_REQ07_RDF_PWDOWN_ACLK 0x07, 0xdf
+#define TM6000_REQ07_RE0_VADC_REF_CTL 0x07, 0xe0
+#define TM6000_REQ07_RE1_VADC_DACLIMP 0x07, 0xe1
+#define TM6000_REQ07_RE2_VADC_STATUS_CTL 0x07, 0xe2
+#define TM6000_REQ07_RE3_VADC_INP_LPF_SEL1 0x07, 0xe3
+#define TM6000_REQ07_RE4_VADC_TARGET1 0x07, 0xe4
+#define TM6000_REQ07_RE5_VADC_INP_LPF_SEL2 0x07, 0xe5
+#define TM6000_REQ07_RE6_VADC_TARGET2 0x07, 0xe6
+#define TM6000_REQ07_RE7_VADC_AGAIN_CTL 0x07, 0xe7
+#define TM6000_REQ07_RE8_VADC_PWDOWN_CTL 0x07, 0xe8
+#define TM6000_REQ07_RE9_VADC_INPUT_CTL1 0x07, 0xe9
+#define TM6000_REQ07_REA_VADC_INPUT_CTL2 0x07, 0xea
+#define TM6000_REQ07_REB_VADC_AADC_MODE 0x07, 0xeb
+#define TM6000_REQ07_REC_VADC_AADC_LVOL 0x07, 0xec
+#define TM6000_REQ07_RED_VADC_AADC_RVOL 0x07, 0xed
+#define TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL 0x07, 0xee
+#define TM6000_REQ07_REF_VADC_GAIN_MAP_CTL 0x07, 0xef
+#define TM6000_REQ07_RFD_BIST_ERR_VST_LOW 0x07, 0xfd
+#define TM6000_REQ07_RFE_BIST_ERR_VST_HIGH 0x07, 0xfe
+
+/* Define TM6000/TM6010 Video decoder registers */
+#define TM6010_REQ07_R00_VIDEO_CONTROL0 0x07, 0x00
+#define TM6010_REQ07_R01_VIDEO_CONTROL1 0x07, 0x01
+#define TM6010_REQ07_R02_VIDEO_CONTROL2 0x07, 0x02
+#define TM6010_REQ07_R03_YC_SEP_CONTROL 0x07, 0x03
+#define TM6010_REQ07_R04_LUMA_HAGC_CONTROL 0x07, 0x04
+#define TM6010_REQ07_R05_NOISE_THRESHOLD 0x07, 0x05
+#define TM6010_REQ07_R06_AGC_GATE_THRESHOLD 0x07, 0x06
+#define TM6010_REQ07_R07_OUTPUT_CONTROL 0x07, 0x07
+#define TM6010_REQ07_R08_LUMA_CONTRAST_ADJ 0x07, 0x08
+#define TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ 0x07, 0x09
+#define TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ 0x07, 0x0a
+#define TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ 0x07, 0x0b
+#define TM6010_REQ07_R0C_CHROMA_AGC_CONTROL 0x07, 0x0c
+#define TM6010_REQ07_R0D_CHROMA_KILL_LEVEL 0x07, 0x0d
+#define TM6010_REQ07_R0F_CHROMA_AUTO_POSITION 0x07, 0x0f
+#define TM6010_REQ07_R10_AGC_PEAK_NOMINAL 0x07, 0x10
+#define TM6010_REQ07_R11_AGC_PEAK_CONTROL 0x07, 0x11
+#define TM6010_REQ07_R12_AGC_GATE_STARTH 0x07, 0x12
+#define TM6010_REQ07_R13_AGC_GATE_STARTL 0x07, 0x13
+#define TM6010_REQ07_R14_AGC_GATE_WIDTH 0x07, 0x14
+#define TM6010_REQ07_R15_AGC_BP_DELAY 0x07, 0x15
+#define TM6010_REQ07_R16_LOCK_COUNT 0x07, 0x16
+#define TM6010_REQ07_R17_HLOOP_MAXSTATE 0x07, 0x17
+#define TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3 0x07, 0x18
+#define TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2 0x07, 0x19
+#define TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1 0x07, 0x1a
+#define TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0 0x07, 0x1b
+#define TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3 0x07, 0x1c
+#define TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2 0x07, 0x1d
+#define TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1 0x07, 0x1e
+#define TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0 0x07, 0x1f
+#define TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME 0x07, 0x20
+#define TM6010_REQ07_R21_HSYNC_PHASE_OFFSET 0x07, 0x21
+#define TM6010_REQ07_R22_HSYNC_PLL_START_TIME 0x07, 0x22
+#define TM6010_REQ07_R23_HSYNC_PLL_END_TIME 0x07, 0x23
+#define TM6010_REQ07_R24_HSYNC_TIP_START_TIME 0x07, 0x24
+#define TM6010_REQ07_R25_HSYNC_TIP_END_TIME 0x07, 0x25
+#define TM6010_REQ07_R26_HSYNC_RISING_EDGE_START 0x07, 0x26
+#define TM6010_REQ07_R27_HSYNC_RISING_EDGE_END 0x07, 0x27
+#define TM6010_REQ07_R28_BACKPORCH_START 0x07, 0x28
+#define TM6010_REQ07_R29_BACKPORCH_END 0x07, 0x29
+#define TM6010_REQ07_R2A_HSYNC_FILTER_START 0x07, 0x2a
+#define TM6010_REQ07_R2B_HSYNC_FILTER_END 0x07, 0x2b
+#define TM6010_REQ07_R2C_CHROMA_BURST_START 0x07, 0x2c
+#define TM6010_REQ07_R2D_CHROMA_BURST_END 0x07, 0x2d
+#define TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART 0x07, 0x2e
+#define TM6010_REQ07_R2F_ACTIVE_VIDEO_HWIDTH 0x07, 0x2f
+#define TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART 0x07, 0x30
+#define TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT 0x07, 0x31
+#define TM6010_REQ07_R32_VSYNC_HLOCK_MIN 0x07, 0x32
+#define TM6010_REQ07_R33_VSYNC_HLOCK_MAX 0x07, 0x33
+#define TM6010_REQ07_R34_VSYNC_AGC_MIN 0x07, 0x34
+#define TM6010_REQ07_R35_VSYNC_AGC_MAX 0x07, 0x35
+#define TM6010_REQ07_R36_VSYNC_VBI_MIN 0x07, 0x36
+#define TM6010_REQ07_R37_VSYNC_VBI_MAX 0x07, 0x37
+#define TM6010_REQ07_R38_VSYNC_THRESHOLD 0x07, 0x38
+#define TM6010_REQ07_R39_VSYNC_TIME_CONSTANT 0x07, 0x39
+#define TM6010_REQ07_R3A_STATUS1 0x07, 0x3a
+#define TM6010_REQ07_R3B_STATUS2 0x07, 0x3b
+#define TM6010_REQ07_R3C_STATUS3 0x07, 0x3c
+#define TM6010_REQ07_R3F_RESET 0x07, 0x3f
+#define TM6010_REQ07_R40_TELETEXT_VBI_CODE0 0x07, 0x40
+#define TM6010_REQ07_R41_TELETEXT_VBI_CODE1 0x07, 0x41
+#define TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL 0x07, 0x42
+#define TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7 0x07, 0x43
+#define TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8 0x07, 0x44
+#define TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9 0x07, 0x45
+#define TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10 0x07, 0x46
+#define TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11 0x07, 0x47
+#define TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12 0x07, 0x48
+#define TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13 0x07, 0x49
+#define TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14 0x07, 0x4a
+#define TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15 0x07, 0x4b
+#define TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16 0x07, 0x4c
+#define TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17 0x07, 0x4d
+#define TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18 0x07, 0x4e
+#define TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19 0x07, 0x4f
+#define TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20 0x07, 0x50
+#define TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21 0x07, 0x51
+#define TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22 0x07, 0x52
+#define TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23 0x07, 0x53
+#define TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES 0x07, 0x54
+#define TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN 0x07, 0x55
+#define TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN 0x07, 0x56
+#define TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN 0x07, 0x57
+#define TM6010_REQ07_R58_VBI_CAPTION_DTO1 0x07, 0x58
+#define TM6010_REQ07_R59_VBI_CAPTION_DTO0 0x07, 0x59
+#define TM6010_REQ07_R5A_VBI_TELETEXT_DTO1 0x07, 0x5a
+#define TM6010_REQ07_R5B_VBI_TELETEXT_DTO0 0x07, 0x5b
+#define TM6010_REQ07_R5C_VBI_WSS625_DTO1 0x07, 0x5c
+#define TM6010_REQ07_R5D_VBI_WSS625_DTO0 0x07, 0x5d
+#define TM6010_REQ07_R5E_VBI_CAPTION_FRAME_START 0x07, 0x5e
+#define TM6010_REQ07_R5F_VBI_WSS625_FRAME_START 0x07, 0x5f
+#define TM6010_REQ07_R60_TELETEXT_FRAME_START 0x07, 0x60
+#define TM6010_REQ07_R61_VBI_CCDATA1 0x07, 0x61
+#define TM6010_REQ07_R62_VBI_CCDATA2 0x07, 0x62
+#define TM6010_REQ07_R63_VBI_WSS625_DATA1 0x07, 0x63
+#define TM6010_REQ07_R64_VBI_WSS625_DATA2 0x07, 0x64
+#define TM6010_REQ07_R65_VBI_DATA_STATUS 0x07, 0x65
+#define TM6010_REQ07_R66_VBI_CAPTION_START 0x07, 0x66
+#define TM6010_REQ07_R67_VBI_WSS625_START 0x07, 0x67
+#define TM6010_REQ07_R68_VBI_TELETEXT_START 0x07, 0x68
+#define TM6010_REQ07_R70_HSYNC_DTO_INC_STATUS3 0x07, 0x70
+#define TM6010_REQ07_R71_HSYNC_DTO_INC_STATUS2 0x07, 0x71
+#define TM6010_REQ07_R72_HSYNC_DTO_INC_STATUS1 0x07, 0x72
+#define TM6010_REQ07_R73_HSYNC_DTO_INC_STATUS0 0x07, 0x73
+#define TM6010_REQ07_R74_CHROMA_DTO_INC_STATUS3 0x07, 0x74
+#define TM6010_REQ07_R75_CHROMA_DTO_INC_STATUS2 0x07, 0x75
+#define TM6010_REQ07_R76_CHROMA_DTO_INC_STATUS1 0x07, 0x76
+#define TM6010_REQ07_R77_CHROMA_DTO_INC_STATUS0 0x07, 0x77
+#define TM6010_REQ07_R78_AGC_AGAIN_STATUS 0x07, 0x78
+#define TM6010_REQ07_R79_AGC_DGAIN_STATUS 0x07, 0x79
+#define TM6010_REQ07_R7A_CHROMA_MAG_STATUS 0x07, 0x7a
+#define TM6010_REQ07_R7B_CHROMA_GAIN_STATUS1 0x07, 0x7b
+#define TM6010_REQ07_R7C_CHROMA_GAIN_STATUS0 0x07, 0x7c
+#define TM6010_REQ07_R7D_CORDIC_FREQ_STATUS 0x07, 0x7d
+#define TM6010_REQ07_R7F_STATUS_NOISE 0x07, 0x7f
+#define TM6010_REQ07_R80_COMB_FILTER_TRESHOLD 0x07, 0x80
+#define TM6010_REQ07_R82_COMB_FILTER_CONFIG 0x07, 0x82
+#define TM6010_REQ07_R83_CHROMA_LOCK_CONFIG 0x07, 0x83
+#define TM6010_REQ07_R84_NOISE_NTSC_C 0x07, 0x84
+#define TM6010_REQ07_R85_NOISE_PAL_C 0x07, 0x85
+#define TM6010_REQ07_R86_NOISE_PHASE_C 0x07, 0x86
+#define TM6010_REQ07_R87_NOISE_PHASE_Y 0x07, 0x87
+#define TM6010_REQ07_R8A_CHROMA_LOOPFILTER_STATE 0x07, 0x8a
+#define TM6010_REQ07_R8B_CHROMA_HRESAMPLER 0x07, 0x8b
+#define TM6010_REQ07_R8D_CPUMP_DELAY_ADJ 0x07, 0x8d
+#define TM6010_REQ07_R8E_CPUMP_ADJ 0x07, 0x8e
+#define TM6010_REQ07_R8F_CPUMP_DELAY 0x07, 0x8f
+
+/* Define TM6000/TM6010 Miscellaneous registers */
+#define TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE 0x07, 0xc0
+#define TM6010_REQ07_RC1_TRESHOLD 0x07, 0xc1
+#define TM6010_REQ07_RC2_HSYNC_WIDTH 0x07, 0xc2
+#define TM6010_REQ07_RC3_HSTART1 0x07, 0xc3
+#define TM6010_REQ07_RC4_HSTART0 0x07, 0xc4
+#define TM6010_REQ07_RC5_HEND1 0x07, 0xc5
+#define TM6010_REQ07_RC6_HEND0 0x07, 0xc6
+#define TM6010_REQ07_RC7_VSTART1 0x07, 0xc7
+#define TM6010_REQ07_RC8_VSTART0 0x07, 0xc8
+#define TM6010_REQ07_RC9_VEND1 0x07, 0xc9
+#define TM6010_REQ07_RCA_VEND0 0x07, 0xca
+#define TM6010_REQ07_RCB_DELAY 0x07, 0xcb
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RCC_ACTIVE_IF 0x07, 0xcc
+#define TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE (1 << 5)
+#define TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE (1 << 6)
+#define TM6010_REQ07_RD0_USB_PERIPHERY_CONTROL 0x07, 0xd0
+#define TM6010_REQ07_RD1_ADDR_FOR_REQ1 0x07, 0xd1
+#define TM6010_REQ07_RD2_ADDR_FOR_REQ2 0x07, 0xd2
+#define TM6010_REQ07_RD3_ADDR_FOR_REQ3 0x07, 0xd3
+#define TM6010_REQ07_RD4_ADDR_FOR_REQ4 0x07, 0xd4
+#define TM6010_REQ07_RD5_POWERSAVE 0x07, 0xd5
+#define TM6010_REQ07_RD6_ENDP_REQ1_REQ2 0x07, 0xd6
+#define TM6010_REQ07_RD7_ENDP_REQ3_REQ4 0x07, 0xd7
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR 0x07, 0xd8
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR_BSIZE 0x07, 0xd9
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR_WAKEUP_SEL 0x07, 0xda
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR_WAKEUP_ADD 0x07, 0xdb
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR_LEADER1 0x07, 0xdc
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR_LEADER0 0x07, 0xdd
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR_PULSE_CNT1 0x07, 0xde
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR_PULSE_CNT0 0x07, 0xdf
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE0_DVIDEO_SOURCE 0x07, 0xe0
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE0_DVIDEO_SOURCE_IF 0x07, 0xe1
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE2_OUT_SEL2 0x07, 0xe2
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE3_OUT_SEL1 0x07, 0xe3
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE4_OUT_SEL0 0x07, 0xe4
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE5_REMOTE_WAKEUP 0x07, 0xe5
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE7_PUB_GPIO 0x07, 0xe7
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE8_TYPESEL_MOS_I2S 0x07, 0xe8
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE9_TYPESEL_MOS_TS 0x07, 0xe9
+/* ONLY for TM6010 */
+#define TM6010_REQ07_REA_TYPESEL_MOS_CCIR 0x07, 0xea
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF0_BIST_CRC_RESULT0 0x07, 0xf0
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF1_BIST_CRC_RESULT1 0x07, 0xf1
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF2_BIST_CRC_RESULT2 0x07, 0xf2
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF3_BIST_CRC_RESULT3 0x07, 0xf3
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF4_BIST_ERR_VST2 0x07, 0xf4
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF5_BIST_ERR_VST1 0x07, 0xf5
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF6_BIST_ERR_VST0 0x07, 0xf6
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF7_BIST 0x07, 0xf7
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RFE_POWER_DOWN 0x07, 0xfe
+#define TM6010_REQ07_RFF_SOFT_RESET 0x07, 0xff
+
+/* Define TM6000/TM6010 USB registers */
+#define TM6010_REQ05_R00_MAIN_CTRL 0x05, 0x00
+#define TM6010_REQ05_R01_DEVADDR 0x05, 0x01
+#define TM6010_REQ05_R02_TEST 0x05, 0x02
+#define TM6010_REQ05_R04_SOFN0 0x05, 0x04
+#define TM6010_REQ05_R05_SOFN1 0x05, 0x05
+#define TM6010_REQ05_R06_SOFTM0 0x05, 0x06
+#define TM6010_REQ05_R07_SOFTM1 0x05, 0x07
+#define TM6010_REQ05_R08_PHY_TEST 0x05, 0x08
+#define TM6010_REQ05_R09_VCTL 0x05, 0x09
+#define TM6010_REQ05_R0A_VSTA 0x05, 0x0a
+#define TM6010_REQ05_R0B_CX_CFG 0x05, 0x0b
+#define TM6010_REQ05_R0C_ENDP0_REG0 0x05, 0x0c
+#define TM6010_REQ05_R10_GMASK 0x05, 0x10
+#define TM6010_REQ05_R11_IMASK0 0x05, 0x11
+#define TM6010_REQ05_R12_IMASK1 0x05, 0x12
+#define TM6010_REQ05_R13_IMASK2 0x05, 0x13
+#define TM6010_REQ05_R14_IMASK3 0x05, 0x14
+#define TM6010_REQ05_R15_IMASK4 0x05, 0x15
+#define TM6010_REQ05_R16_IMASK5 0x05, 0x16
+#define TM6010_REQ05_R17_IMASK6 0x05, 0x17
+#define TM6010_REQ05_R18_IMASK7 0x05, 0x18
+#define TM6010_REQ05_R19_ZEROP0 0x05, 0x19
+#define TM6010_REQ05_R1A_ZEROP1 0x05, 0x1a
+#define TM6010_REQ05_R1C_FIFO_EMP0 0x05, 0x1c
+#define TM6010_REQ05_R1D_FIFO_EMP1 0x05, 0x1d
+#define TM6010_REQ05_R20_IRQ_GROUP 0x05, 0x20
+#define TM6010_REQ05_R21_IRQ_SOURCE0 0x05, 0x21
+#define TM6010_REQ05_R22_IRQ_SOURCE1 0x05, 0x22
+#define TM6010_REQ05_R23_IRQ_SOURCE2 0x05, 0x23
+#define TM6010_REQ05_R24_IRQ_SOURCE3 0x05, 0x24
+#define TM6010_REQ05_R25_IRQ_SOURCE4 0x05, 0x25
+#define TM6010_REQ05_R26_IRQ_SOURCE5 0x05, 0x26
+#define TM6010_REQ05_R27_IRQ_SOURCE6 0x05, 0x27
+#define TM6010_REQ05_R28_IRQ_SOURCE7 0x05, 0x28
+#define TM6010_REQ05_R29_SEQ_ERR0 0x05, 0x29
+#define TM6010_REQ05_R2A_SEQ_ERR1 0x05, 0x2a
+#define TM6010_REQ05_R2B_SEQ_ABORT0 0x05, 0x2b
+#define TM6010_REQ05_R2C_SEQ_ABORT1 0x05, 0x2c
+#define TM6010_REQ05_R2D_TX_ZERO0 0x05, 0x2d
+#define TM6010_REQ05_R2E_TX_ZERO1 0x05, 0x2e
+#define TM6010_REQ05_R2F_IDLE_CNT 0x05, 0x2f
+#define TM6010_REQ05_R30_FNO_P1 0x05, 0x30
+#define TM6010_REQ05_R31_FNO_P2 0x05, 0x31
+#define TM6010_REQ05_R32_FNO_P3 0x05, 0x32
+#define TM6010_REQ05_R33_FNO_P4 0x05, 0x33
+#define TM6010_REQ05_R34_FNO_P5 0x05, 0x34
+#define TM6010_REQ05_R35_FNO_P6 0x05, 0x35
+#define TM6010_REQ05_R36_FNO_P7 0x05, 0x36
+#define TM6010_REQ05_R37_FNO_P8 0x05, 0x37
+#define TM6010_REQ05_R38_FNO_P9 0x05, 0x38
+#define TM6010_REQ05_R30_FNO_P10 0x05, 0x39
+#define TM6010_REQ05_R30_FNO_P11 0x05, 0x3a
+#define TM6010_REQ05_R30_FNO_P12 0x05, 0x3b
+#define TM6010_REQ05_R30_FNO_P13 0x05, 0x3c
+#define TM6010_REQ05_R30_FNO_P14 0x05, 0x3d
+#define TM6010_REQ05_R30_FNO_P15 0x05, 0x3e
+#define TM6010_REQ05_R40_IN_MAXPS_LOW1 0x05, 0x40
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH1 0x05, 0x41
+#define TM6010_REQ05_R42_IN_MAXPS_LOW2 0x05, 0x42
+#define TM6010_REQ05_R43_IN_MAXPS_HIGH2 0x05, 0x43
+#define TM6010_REQ05_R44_IN_MAXPS_LOW3 0x05, 0x44
+#define TM6010_REQ05_R45_IN_MAXPS_HIGH3 0x05, 0x45
+#define TM6010_REQ05_R46_IN_MAXPS_LOW4 0x05, 0x46
+#define TM6010_REQ05_R47_IN_MAXPS_HIGH4 0x05, 0x47
+#define TM6010_REQ05_R48_IN_MAXPS_LOW5 0x05, 0x48
+#define TM6010_REQ05_R49_IN_MAXPS_HIGH5 0x05, 0x49
+#define TM6010_REQ05_R4A_IN_MAXPS_LOW6 0x05, 0x4a
+#define TM6010_REQ05_R4B_IN_MAXPS_HIGH6 0x05, 0x4b
+#define TM6010_REQ05_R4C_IN_MAXPS_LOW7 0x05, 0x4c
+#define TM6010_REQ05_R4D_IN_MAXPS_HIGH7 0x05, 0x4d
+#define TM6010_REQ05_R4E_IN_MAXPS_LOW8 0x05, 0x4e
+#define TM6010_REQ05_R4F_IN_MAXPS_HIGH8 0x05, 0x4f
+#define TM6010_REQ05_R50_IN_MAXPS_LOW9 0x05, 0x50
+#define TM6010_REQ05_R51_IN_MAXPS_HIGH9 0x05, 0x51
+#define TM6010_REQ05_R40_IN_MAXPS_LOW10 0x05, 0x52
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH10 0x05, 0x53
+#define TM6010_REQ05_R40_IN_MAXPS_LOW11 0x05, 0x54
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH11 0x05, 0x55
+#define TM6010_REQ05_R40_IN_MAXPS_LOW12 0x05, 0x56
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH12 0x05, 0x57
+#define TM6010_REQ05_R40_IN_MAXPS_LOW13 0x05, 0x58
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH13 0x05, 0x59
+#define TM6010_REQ05_R40_IN_MAXPS_LOW14 0x05, 0x5a
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH14 0x05, 0x5b
+#define TM6010_REQ05_R40_IN_MAXPS_LOW15 0x05, 0x5c
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH15 0x05, 0x5d
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW1 0x05, 0x60
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH1 0x05, 0x61
+#define TM6010_REQ05_R62_OUT_MAXPS_LOW2 0x05, 0x62
+#define TM6010_REQ05_R63_OUT_MAXPS_HIGH2 0x05, 0x63
+#define TM6010_REQ05_R64_OUT_MAXPS_LOW3 0x05, 0x64
+#define TM6010_REQ05_R65_OUT_MAXPS_HIGH3 0x05, 0x65
+#define TM6010_REQ05_R66_OUT_MAXPS_LOW4 0x05, 0x66
+#define TM6010_REQ05_R67_OUT_MAXPS_HIGH4 0x05, 0x67
+#define TM6010_REQ05_R68_OUT_MAXPS_LOW5 0x05, 0x68
+#define TM6010_REQ05_R69_OUT_MAXPS_HIGH5 0x05, 0x69
+#define TM6010_REQ05_R6A_OUT_MAXPS_LOW6 0x05, 0x6a
+#define TM6010_REQ05_R6B_OUT_MAXPS_HIGH6 0x05, 0x6b
+#define TM6010_REQ05_R6C_OUT_MAXPS_LOW7 0x05, 0x6c
+#define TM6010_REQ05_R6D_OUT_MAXPS_HIGH7 0x05, 0x6d
+#define TM6010_REQ05_R6E_OUT_MAXPS_LOW8 0x05, 0x6e
+#define TM6010_REQ05_R6F_OUT_MAXPS_HIGH8 0x05, 0x6f
+#define TM6010_REQ05_R70_OUT_MAXPS_LOW9 0x05, 0x70
+#define TM6010_REQ05_R71_OUT_MAXPS_HIGH9 0x05, 0x71
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW10 0x05, 0x72
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH10 0x05, 0x73
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW11 0x05, 0x74
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH11 0x05, 0x75
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW12 0x05, 0x76
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH12 0x05, 0x77
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW13 0x05, 0x78
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH13 0x05, 0x79
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW14 0x05, 0x7a
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH14 0x05, 0x7b
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW15 0x05, 0x7c
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH15 0x05, 0x7d
+#define TM6010_REQ05_R80_FIFO0 0x05, 0x80
+#define TM6010_REQ05_R81_FIFO1 0x05, 0x81
+#define TM6010_REQ05_R82_FIFO2 0x05, 0x82
+#define TM6010_REQ05_R83_FIFO3 0x05, 0x83
+#define TM6010_REQ05_R84_FIFO4 0x05, 0x84
+#define TM6010_REQ05_R85_FIFO5 0x05, 0x85
+#define TM6010_REQ05_R86_FIFO6 0x05, 0x86
+#define TM6010_REQ05_R87_FIFO7 0x05, 0x87
+#define TM6010_REQ05_R88_FIFO8 0x05, 0x88
+#define TM6010_REQ05_R89_FIFO9 0x05, 0x89
+#define TM6010_REQ05_R81_FIFO10 0x05, 0x8a
+#define TM6010_REQ05_R81_FIFO11 0x05, 0x8b
+#define TM6010_REQ05_R81_FIFO12 0x05, 0x8c
+#define TM6010_REQ05_R81_FIFO13 0x05, 0x8d
+#define TM6010_REQ05_R81_FIFO14 0x05, 0x8e
+#define TM6010_REQ05_R81_FIFO15 0x05, 0x8f
+#define TM6010_REQ05_R90_CFG_FIFO0 0x05, 0x90
+#define TM6010_REQ05_R91_CFG_FIFO1 0x05, 0x91
+#define TM6010_REQ05_R92_CFG_FIFO2 0x05, 0x92
+#define TM6010_REQ05_R93_CFG_FIFO3 0x05, 0x93
+#define TM6010_REQ05_R94_CFG_FIFO4 0x05, 0x94
+#define TM6010_REQ05_R95_CFG_FIFO5 0x05, 0x95
+#define TM6010_REQ05_R96_CFG_FIFO6 0x05, 0x96
+#define TM6010_REQ05_R97_CFG_FIFO7 0x05, 0x97
+#define TM6010_REQ05_R98_CFG_FIFO8 0x05, 0x98
+#define TM6010_REQ05_R99_CFG_FIFO9 0x05, 0x99
+#define TM6010_REQ05_R91_CFG_FIFO10 0x05, 0x9a
+#define TM6010_REQ05_R91_CFG_FIFO11 0x05, 0x9b
+#define TM6010_REQ05_R91_CFG_FIFO12 0x05, 0x9c
+#define TM6010_REQ05_R91_CFG_FIFO13 0x05, 0x9d
+#define TM6010_REQ05_R91_CFG_FIFO14 0x05, 0x9e
+#define TM6010_REQ05_R91_CFG_FIFO15 0x05, 0x9f
+#define TM6010_REQ05_RA0_CTL_FIFO0 0x05, 0xa0
+#define TM6010_REQ05_RA1_CTL_FIFO1 0x05, 0xa1
+#define TM6010_REQ05_RA2_CTL_FIFO2 0x05, 0xa2
+#define TM6010_REQ05_RA3_CTL_FIFO3 0x05, 0xa3
+#define TM6010_REQ05_RA4_CTL_FIFO4 0x05, 0xa4
+#define TM6010_REQ05_RA5_CTL_FIFO5 0x05, 0xa5
+#define TM6010_REQ05_RA6_CTL_FIFO6 0x05, 0xa6
+#define TM6010_REQ05_RA7_CTL_FIFO7 0x05, 0xa7
+#define TM6010_REQ05_RA8_CTL_FIFO8 0x05, 0xa8
+#define TM6010_REQ05_RA9_CTL_FIFO9 0x05, 0xa9
+#define TM6010_REQ05_RA1_CTL_FIFO10 0x05, 0xaa
+#define TM6010_REQ05_RA1_CTL_FIFO11 0x05, 0xab
+#define TM6010_REQ05_RA1_CTL_FIFO12 0x05, 0xac
+#define TM6010_REQ05_RA1_CTL_FIFO13 0x05, 0xad
+#define TM6010_REQ05_RA1_CTL_FIFO14 0x05, 0xae
+#define TM6010_REQ05_RA1_CTL_FIFO15 0x05, 0xaf
+#define TM6010_REQ05_RB0_BC_LOW_FIFO0 0x05, 0xb0
+#define TM6010_REQ05_RB1_BC_LOW_FIFO1 0x05, 0xb1
+#define TM6010_REQ05_RB2_BC_LOW_FIFO2 0x05, 0xb2
+#define TM6010_REQ05_RB3_BC_LOW_FIFO3 0x05, 0xb3
+#define TM6010_REQ05_RB4_BC_LOW_FIFO4 0x05, 0xb4
+#define TM6010_REQ05_RB5_BC_LOW_FIFO5 0x05, 0xb5
+#define TM6010_REQ05_RB6_BC_LOW_FIFO6 0x05, 0xb6
+#define TM6010_REQ05_RB7_BC_LOW_FIFO7 0x05, 0xb7
+#define TM6010_REQ05_RB8_BC_LOW_FIFO8 0x05, 0xb8
+#define TM6010_REQ05_RB9_BC_LOW_FIFO9 0x05, 0xb9
+#define TM6010_REQ05_RB1_BC_LOW_FIFO10 0x05, 0xba
+#define TM6010_REQ05_RB1_BC_LOW_FIFO11 0x05, 0xbb
+#define TM6010_REQ05_RB1_BC_LOW_FIFO12 0x05, 0xbc
+#define TM6010_REQ05_RB1_BC_LOW_FIFO13 0x05, 0xbd
+#define TM6010_REQ05_RB1_BC_LOW_FIFO14 0x05, 0xbe
+#define TM6010_REQ05_RB1_BC_LOW_FIFO15 0x05, 0xbf
+#define TM6010_REQ05_RC0_DATA_FIFO0 0x05, 0xc0
+#define TM6010_REQ05_RC4_DATA_FIFO1 0x05, 0xc4
+#define TM6010_REQ05_RC8_DATA_FIFO2 0x05, 0xc8
+#define TM6010_REQ05_RCC_DATA_FIFO3 0x05, 0xcc
+#define TM6010_REQ05_RD0_DATA_FIFO4 0x05, 0xd0
+#define TM6010_REQ05_RD4_DATA_FIFO5 0x05, 0xd4
+#define TM6010_REQ05_RD8_DATA_FIFO6 0x05, 0xd8
+#define TM6010_REQ05_RDC_DATA_FIFO7 0x05, 0xdc
+#define TM6010_REQ05_RE0_DATA_FIFO8 0x05, 0xe0
+#define TM6010_REQ05_RE4_DATA_FIFO9 0x05, 0xe4
+#define TM6010_REQ05_RC4_DATA_FIFO10 0x05, 0xe8
+#define TM6010_REQ05_RC4_DATA_FIFO11 0x05, 0xec
+#define TM6010_REQ05_RC4_DATA_FIFO12 0x05, 0xf0
+#define TM6010_REQ05_RC4_DATA_FIFO13 0x05, 0xf4
+#define TM6010_REQ05_RC4_DATA_FIFO14 0x05, 0xf8
+#define TM6010_REQ05_RC4_DATA_FIFO15 0x05, 0xfc
+
+/* Define TM6010 Audio decoder registers */
+/* This core available only in TM6010 */
+#define TM6010_REQ08_R00_A_VERSION 0x08, 0x00
+#define TM6010_REQ08_R01_A_INIT 0x08, 0x01
+#define TM6010_REQ08_R02_A_FIX_GAIN_CTRL 0x08, 0x02
+#define TM6010_REQ08_R03_A_AUTO_GAIN_CTRL 0x08, 0x03
+#define TM6010_REQ08_R04_A_SIF_AMP_CTRL 0x08, 0x04
+#define TM6010_REQ08_R05_A_STANDARD_MOD 0x08, 0x05
+#define TM6010_REQ08_R06_A_SOUND_MOD 0x08, 0x06
+#define TM6010_REQ08_R07_A_LEFT_VOL 0x08, 0x07
+#define TM6010_REQ08_R08_A_RIGHT_VOL 0x08, 0x08
+#define TM6010_REQ08_R09_A_MAIN_VOL 0x08, 0x09
+#define TM6010_REQ08_R0A_A_I2S_MOD 0x08, 0x0a
+#define TM6010_REQ08_R0B_A_ASD_THRES1 0x08, 0x0b
+#define TM6010_REQ08_R0C_A_ASD_THRES2 0x08, 0x0c
+#define TM6010_REQ08_R0D_A_AMD_THRES 0x08, 0x0d
+#define TM6010_REQ08_R0E_A_MONO_THRES1 0x08, 0x0e
+#define TM6010_REQ08_R0F_A_MONO_THRES2 0x08, 0x0f
+#define TM6010_REQ08_R10_A_MUTE_THRES1 0x08, 0x10
+#define TM6010_REQ08_R11_A_MUTE_THRES2 0x08, 0x11
+#define TM6010_REQ08_R12_A_AGC_U 0x08, 0x12
+#define TM6010_REQ08_R13_A_AGC_ERR_T 0x08, 0x13
+#define TM6010_REQ08_R14_A_AGC_GAIN_INIT 0x08, 0x14
+#define TM6010_REQ08_R15_A_AGC_STEP_THR 0x08, 0x15
+#define TM6010_REQ08_R16_A_AGC_GAIN_MAX 0x08, 0x16
+#define TM6010_REQ08_R17_A_AGC_GAIN_MIN 0x08, 0x17
+#define TM6010_REQ08_R18_A_TR_CTRL 0x08, 0x18
+#define TM6010_REQ08_R19_A_FH_2FH_GAIN 0x08, 0x19
+#define TM6010_REQ08_R1A_A_NICAM_SER_MAX 0x08, 0x1a
+#define TM6010_REQ08_R1B_A_NICAM_SER_MIN 0x08, 0x1b
+#define TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT 0x08, 0x1e
+#define TM6010_REQ08_R1F_A_TEST_INTF_SEL 0x08, 0x1f
+#define TM6010_REQ08_R20_A_TEST_PIN_SEL 0x08, 0x20
+#define TM6010_REQ08_R21_A_AGC_ERR 0x08, 0x21
+#define TM6010_REQ08_R22_A_AGC_GAIN 0x08, 0x22
+#define TM6010_REQ08_R23_A_NICAM_INFO 0x08, 0x23
+#define TM6010_REQ08_R24_A_SER 0x08, 0x24
+#define TM6010_REQ08_R25_A_C1_AMP 0x08, 0x25
+#define TM6010_REQ08_R26_A_C2_AMP 0x08, 0x26
+#define TM6010_REQ08_R27_A_NOISE_AMP 0x08, 0x27
+#define TM6010_REQ08_R28_A_AUDIO_MODE_RES 0x08, 0x28
+
+/* Define TM6010 Video ADC registers */
+#define TM6010_REQ08_RE0_ADC_REF 0x08, 0xe0
+#define TM6010_REQ08_RE1_DAC_CLMP 0x08, 0xe1
+#define TM6010_REQ08_RE2_POWER_DOWN_CTRL1 0x08, 0xe2
+#define TM6010_REQ08_RE3_ADC_IN1_SEL 0x08, 0xe3
+#define TM6010_REQ08_RE4_ADC_IN2_SEL 0x08, 0xe4
+#define TM6010_REQ08_RE5_GAIN_PARAM 0x08, 0xe5
+#define TM6010_REQ08_RE6_POWER_DOWN_CTRL2 0x08, 0xe6
+#define TM6010_REQ08_RE7_REG_GAIN_Y 0x08, 0xe7
+#define TM6010_REQ08_RE8_REG_GAIN_C 0x08, 0xe8
+#define TM6010_REQ08_RE9_BIAS_CTRL 0x08, 0xe9
+#define TM6010_REQ08_REA_BUFF_DRV_CTRL 0x08, 0xea
+#define TM6010_REQ08_REB_SIF_GAIN_CTRL 0x08, 0xeb
+#define TM6010_REQ08_REC_REVERSE_YC_CTRL 0x08, 0xec
+#define TM6010_REQ08_RED_GAIN_SEL 0x08, 0xed
+
+/* Define TM6010 Audio ADC registers */
+#define TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG 0x08, 0xf0
+#define TM6010_REQ08_RF1_AADC_POWER_DOWN 0x08, 0xf1
+#define TM6010_REQ08_RF2_LEFT_CHANNEL_VOL 0x08, 0xf2
+#define TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL 0x08, 0xf3
diff --git a/drivers/media/video/tm6000/tm6000-stds.c b/drivers/media/video/tm6000/tm6000-stds.c
new file mode 100644
index 0000000..9a4145dc
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-stds.c
@@ -0,0 +1,659 @@
+/*
+ * tm6000-stds.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2007 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+static unsigned int tm6010_a_mode;
+module_param(tm6010_a_mode, int, 0644);
+MODULE_PARM_DESC(tm6010_a_mode, "set tm6010 sif audio mode");
+
+struct tm6000_reg_settings {
+ unsigned char req;
+ unsigned char reg;
+ unsigned char value;
+};
+
+
+struct tm6000_std_settings {
+ v4l2_std_id id;
+ struct tm6000_reg_settings *common;
+};
+
+static struct tm6000_reg_settings composite_pal_m[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x04 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x20 },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_pal_nc[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x36 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_pal[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x32 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_secam[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x38 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_ntsc[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_std_settings composite_stds[] = {
+ { .id = V4L2_STD_PAL_M, .common = composite_pal_m, },
+ { .id = V4L2_STD_PAL_Nc, .common = composite_pal_nc, },
+ { .id = V4L2_STD_PAL, .common = composite_pal, },
+ { .id = V4L2_STD_SECAM, .common = composite_secam, },
+ { .id = V4L2_STD_NTSC, .common = composite_ntsc, },
+};
+
+static struct tm6000_reg_settings svideo_pal_m[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x05 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_pal_nc[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x37 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_pal[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x33 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_secam[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x39 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_ntsc[] = {
+ { TM6010_REQ07_R3F_RESET, 0x01 },
+ { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x01 },
+ { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f },
+ { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+ { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 },
+ { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 },
+ { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0x8b },
+ { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+ { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+ { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+ { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+ { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+ { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+ { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+ { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+ { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+ { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+ { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+ { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+ { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+ { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+ { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+ { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd },
+ { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+ { TM6010_REQ07_R3F_RESET, 0x00 },
+ { 0, 0, 0 }
+};
+
+static struct tm6000_std_settings svideo_stds[] = {
+ { .id = V4L2_STD_PAL_M, .common = svideo_pal_m, },
+ { .id = V4L2_STD_PAL_Nc, .common = svideo_pal_nc, },
+ { .id = V4L2_STD_PAL, .common = svideo_pal, },
+ { .id = V4L2_STD_SECAM, .common = svideo_secam, },
+ { .id = V4L2_STD_NTSC, .common = svideo_ntsc, },
+};
+
+static int tm6000_set_audio_std(struct tm6000_core *dev)
+{
+ uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */
+ uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */
+ uint8_t areg_06 = 0x02; /* Auto de-emphasis, mannual channel mode */
+ uint8_t nicam_flag = 0; /* No NICAM */
+
+ if (dev->radio) {
+ tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04);
+ tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80);
+ tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c);
+ /* set mono or stereo */
+ if (dev->amode == V4L2_TUNER_MODE_MONO)
+ tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00);
+ else if (dev->amode == V4L2_TUNER_MODE_STEREO)
+ tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x02);
+ tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18);
+ tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a);
+ tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x40);
+ tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe);
+ tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
+ tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
+ tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0xff);
+ return 0;
+ }
+
+ switch (tm6010_a_mode) {
+ /* auto */
+ case 0:
+ switch (dev->norm) {
+ case V4L2_STD_NTSC_M_KR:
+ areg_05 |= 0x00;
+ break;
+ case V4L2_STD_NTSC_M_JP:
+ areg_05 |= 0x40;
+ break;
+ case V4L2_STD_NTSC_M:
+ case V4L2_STD_PAL_M:
+ case V4L2_STD_PAL_N:
+ areg_05 |= 0x20;
+ break;
+ case V4L2_STD_PAL_Nc:
+ areg_05 |= 0x60;
+ break;
+ case V4L2_STD_SECAM_L:
+ areg_05 |= 0x00;
+ break;
+ case V4L2_STD_DK:
+ areg_05 |= 0x10;
+ break;
+ }
+ break;
+ /* A2 */
+ case 1:
+ switch (dev->norm) {
+ case V4L2_STD_B:
+ case V4L2_STD_GH:
+ areg_05 = 0x05;
+ break;
+ case V4L2_STD_DK:
+ areg_05 = 0x09;
+ break;
+ }
+ break;
+ /* NICAM */
+ case 2:
+ switch (dev->norm) {
+ case V4L2_STD_B:
+ case V4L2_STD_GH:
+ areg_05 = 0x07;
+ break;
+ case V4L2_STD_DK:
+ areg_05 = 0x06;
+ break;
+ case V4L2_STD_PAL_I:
+ areg_05 = 0x08;
+ break;
+ case V4L2_STD_SECAM_L:
+ areg_05 = 0x0a;
+ areg_02 = 0x02;
+ break;
+ }
+ nicam_flag = 1;
+ break;
+ /* other */
+ case 3:
+ switch (dev->norm) {
+ /* DK3_A2 */
+ case V4L2_STD_DK:
+ areg_05 = 0x0b;
+ break;
+ /* Korea */
+ case V4L2_STD_NTSC_M_KR:
+ areg_05 = 0x04;
+ break;
+ /* EIAJ */
+ case V4L2_STD_NTSC_M_JP:
+ areg_05 = 0x03;
+ break;
+ default:
+ areg_05 = 0x02;
+ break;
+ }
+ break;
+ }
+
+ tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, areg_02);
+ tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0xa0);
+ tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, areg_05);
+ tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, areg_06);
+ tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x08);
+ tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91);
+ tm6000_set_reg(dev, TM6010_REQ08_R0B_A_ASD_THRES1, 0x20);
+ tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x12);
+ tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x20);
+ tm6000_set_reg(dev, TM6010_REQ08_R0E_A_MONO_THRES1, 0xf0);
+ tm6000_set_reg(dev, TM6010_REQ08_R0F_A_MONO_THRES2, 0x80);
+ tm6000_set_reg(dev, TM6010_REQ08_R10_A_MUTE_THRES1, 0xc0);
+ tm6000_set_reg(dev, TM6010_REQ08_R11_A_MUTE_THRES2, 0x80);
+ tm6000_set_reg(dev, TM6010_REQ08_R12_A_AGC_U, 0x12);
+ tm6000_set_reg(dev, TM6010_REQ08_R13_A_AGC_ERR_T, 0xfe);
+ tm6000_set_reg(dev, TM6010_REQ08_R14_A_AGC_GAIN_INIT, 0x20);
+ tm6000_set_reg(dev, TM6010_REQ08_R15_A_AGC_STEP_THR, 0x14);
+ tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe);
+ tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01);
+ tm6000_set_reg(dev, TM6010_REQ08_R18_A_TR_CTRL, 0xa0);
+ tm6000_set_reg(dev, TM6010_REQ08_R19_A_FH_2FH_GAIN, 0x32);
+ tm6000_set_reg(dev, TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64);
+ tm6000_set_reg(dev, TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20);
+ tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1c, 0x00);
+ tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1d, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
+ tm6000_set_reg(dev, TM6010_REQ08_R1F_A_TEST_INTF_SEL, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R20_A_TEST_PIN_SEL, 0x00);
+ tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
+
+ return 0;
+}
+
+void tm6000_get_std_res(struct tm6000_core *dev)
+{
+ /* Currently, those are the only supported resoltions */
+ if (dev->norm & V4L2_STD_525_60)
+ dev->height = 480;
+ else
+ dev->height = 576;
+
+ dev->width = 720;
+}
+
+static int tm6000_load_std(struct tm6000_core *dev, struct tm6000_reg_settings *set)
+{
+ int i, rc;
+
+ /* Load board's initialization table */
+ for (i = 0; set[i].req; i++) {
+ rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i while setting "
+ "req %d, reg %d to value %d\n",
+ rc, set[i].req, set[i].reg, set[i].value);
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+int tm6000_set_standard(struct tm6000_core *dev)
+{
+ struct tm6000_input *input;
+ int i, rc = 0;
+ u8 reg_07_fe = 0x8a;
+ u8 reg_08_f1 = 0xfc;
+ u8 reg_08_e2 = 0xf0;
+ u8 reg_08_e6 = 0x0f;
+
+ tm6000_get_std_res(dev);
+
+ if (!dev->radio)
+ input = &dev->vinput[dev->input];
+ else
+ input = &dev->rinput;
+
+ if (dev->dev_type == TM6010) {
+ switch (input->vmux) {
+ case TM6000_VMUX_VIDEO_A:
+ tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4);
+ tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
+ tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
+ tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
+ tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
+ reg_07_fe |= 0x01;
+ break;
+ case TM6000_VMUX_VIDEO_B:
+ tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf8);
+ tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
+ tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
+ tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
+ tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
+ reg_07_fe |= 0x01;
+ break;
+ case TM6000_VMUX_VIDEO_AB:
+ tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xfc);
+ tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8);
+ reg_08_e6 = 0x00;
+ tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2);
+ tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0);
+ tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
+ tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe0);
+ break;
+ default:
+ break;
+ }
+ switch (input->amux) {
+ case TM6000_AMUX_ADC1:
+ tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+ 0x00, 0x0f);
+ break;
+ case TM6000_AMUX_ADC2:
+ tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+ 0x08, 0x0f);
+ break;
+ case TM6000_AMUX_SIF1:
+ reg_08_e2 |= 0x02;
+ reg_08_e6 = 0x08;
+ reg_07_fe |= 0x40;
+ reg_08_f1 |= 0x02;
+ tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf3);
+ tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+ 0x02, 0x0f);
+ break;
+ case TM6000_AMUX_SIF2:
+ reg_08_e2 |= 0x02;
+ reg_08_e6 = 0x08;
+ reg_07_fe |= 0x40;
+ reg_08_f1 |= 0x02;
+ tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf7);
+ tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+ 0x02, 0x0f);
+ break;
+ default:
+ break;
+ }
+ tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, reg_08_e2);
+ tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, reg_08_e6);
+ tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, reg_08_f1);
+ tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, reg_07_fe);
+ } else {
+ switch (input->vmux) {
+ case TM6000_VMUX_VIDEO_A:
+ tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
+ tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
+ tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
+ tm6000_set_reg(dev,
+ REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0);
+ break;
+ case TM6000_VMUX_VIDEO_B:
+ tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x00);
+ tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
+ tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
+ tm6000_set_reg(dev,
+ REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0);
+ break;
+ case TM6000_VMUX_VIDEO_AB:
+ tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
+ tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x10);
+ tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00);
+ tm6000_set_reg(dev,
+ REQ_03_SET_GET_MCU_PIN, input->v_gpio, 1);
+ break;
+ default:
+ break;
+ }
+ switch (input->amux) {
+ case TM6000_AMUX_ADC1:
+ tm6000_set_reg_mask(dev,
+ TM6000_REQ07_REB_VADC_AADC_MODE, 0x00, 0x0f);
+ break;
+ case TM6000_AMUX_ADC2:
+ tm6000_set_reg_mask(dev,
+ TM6000_REQ07_REB_VADC_AADC_MODE, 0x04, 0x0f);
+ break;
+ default:
+ break;
+ }
+ }
+ if (input->type == TM6000_INPUT_SVIDEO) {
+ for (i = 0; i < ARRAY_SIZE(svideo_stds); i++) {
+ if (dev->norm & svideo_stds[i].id) {
+ rc = tm6000_load_std(dev, svideo_stds[i].common);
+ goto ret;
+ }
+ }
+ return -EINVAL;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(composite_stds); i++) {
+ if (dev->norm & composite_stds[i].id) {
+ rc = tm6000_load_std(dev, composite_stds[i].common);
+ goto ret;
+ }
+ }
+ return -EINVAL;
+ }
+
+ret:
+ if (rc < 0)
+ return rc;
+
+ if ((dev->dev_type == TM6010) &&
+ ((input->amux == TM6000_AMUX_SIF1) ||
+ (input->amux == TM6000_AMUX_SIF2)))
+ tm6000_set_audio_std(dev);
+
+ msleep(40);
+
+ return 0;
+}
diff --git a/drivers/media/video/tm6000/tm6000-usb-isoc.h b/drivers/media/video/tm6000/tm6000-usb-isoc.h
new file mode 100644
index 0000000..99d15a5
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-usb-isoc.h
@@ -0,0 +1,50 @@
+/*
+ * tm6000-buf.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/videodev2.h>
+
+#define TM6000_URB_MSG_LEN 180
+
+struct usb_isoc_ctl {
+ /* max packet size of isoc transaction */
+ int max_pkt_size;
+
+ /* number of allocated urbs */
+ int num_bufs;
+
+ /* urb for isoc transfers */
+ struct urb **urb;
+
+ /* transfer buffers for isoc transfer */
+ char **transfer_buffer;
+
+ /* Last buffer command and region */
+ u8 cmd;
+ int pos, size, pktsize;
+
+ /* Last field: ODD or EVEN? */
+ int vfield, field;
+
+ /* Stores incomplete commands */
+ u32 tmp_buf;
+ int tmp_buf_len;
+
+ /* Stores already requested buffers */
+ struct tm6000_buffer *buf;
+};
diff --git a/drivers/media/video/tm6000/tm6000-video.c b/drivers/media/video/tm6000/tm6000-video.c
new file mode 100644
index 0000000..1e5ace0
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000-video.c
@@ -0,0 +1,1813 @@
+/*
+ * tm6000-video.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ * - Fixed module load/unload
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/random.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ioctl.h>
+#include <media/tuner.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/highmem.h>
+#include <linux/freezer.h>
+
+#include "tm6000-regs.h"
+#include "tm6000.h"
+
+#define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
+
+/* Limits minimum and default number of buffers */
+#define TM6000_MIN_BUF 4
+#define TM6000_DEF_BUF 8
+
+#define TM6000_MAX_ISO_PACKETS 46 /* Max number of ISO packets */
+
+/* Declare static vars that will be used as parameters */
+static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
+static int video_nr = -1; /* /dev/videoN, -1 for autodetect */
+static int radio_nr = -1; /* /dev/radioN, -1 for autodetect */
+
+/* Debug level */
+int tm6000_debug;
+EXPORT_SYMBOL_GPL(tm6000_debug);
+
+static const struct v4l2_queryctrl no_ctrl = {
+ .name = "42",
+ .flags = V4L2_CTRL_FLAG_DISABLED,
+};
+
+/* supported controls */
+static struct v4l2_queryctrl tm6000_qctrl[] = {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = 54,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 0x1,
+ .default_value = 119,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 0x1,
+ .default_value = 112,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_HUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Hue",
+ .minimum = -128,
+ .maximum = 127,
+ .step = 0x1,
+ .default_value = 0,
+ .flags = 0,
+ },
+ /* --- audio --- */
+ {
+ .id = V4L2_CID_AUDIO_MUTE,
+ .name = "Mute",
+ .minimum = 0,
+ .maximum = 1,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ }, {
+ .id = V4L2_CID_AUDIO_VOLUME,
+ .name = "Volume",
+ .minimum = -15,
+ .maximum = 15,
+ .step = 1,
+ .default_value = 0,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ }
+};
+
+static const unsigned int CTRLS = ARRAY_SIZE(tm6000_qctrl);
+static int qctl_regs[ARRAY_SIZE(tm6000_qctrl)];
+
+static struct tm6000_fmt format[] = {
+ {
+ .name = "4:2:2, packed, YVY2",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .depth = 16,
+ }, {
+ .name = "4:2:2, packed, UYVY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ }, {
+ .name = "A/V + VBI mux packet",
+ .fourcc = V4L2_PIX_FMT_TM6000,
+ .depth = 16,
+ }
+};
+
+static const struct v4l2_queryctrl *ctrl_by_id(unsigned int id)
+{
+ unsigned int i;
+
+ for (i = 0; i < CTRLS; i++)
+ if (tm6000_qctrl[i].id == id)
+ return tm6000_qctrl+i;
+ return NULL;
+}
+
+/* ------------------------------------------------------------------
+ * DMA and thread functions
+ * ------------------------------------------------------------------
+ */
+
+#define norm_maxw(a) 720
+#define norm_maxh(a) 576
+
+#define norm_minw(a) norm_maxw(a)
+#define norm_minh(a) norm_maxh(a)
+
+/*
+ * video-buf generic routine to get the next available buffer
+ */
+static inline void get_next_buf(struct tm6000_dmaqueue *dma_q,
+ struct tm6000_buffer **buf)
+{
+ struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+ char *outp;
+
+ if (list_empty(&dma_q->active)) {
+ dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n");
+ *buf = NULL;
+ return;
+ }
+
+ *buf = list_entry(dma_q->active.next,
+ struct tm6000_buffer, vb.queue);
+
+ /* Cleans up buffer - Useful for testing for frame/URB loss */
+ outp = videobuf_to_vmalloc(&(*buf)->vb);
+
+ return;
+}
+
+/*
+ * Announces that a buffer were filled and request the next
+ */
+static inline void buffer_filled(struct tm6000_core *dev,
+ struct tm6000_dmaqueue *dma_q,
+ struct tm6000_buffer *buf)
+{
+ /* Advice that buffer was filled */
+ dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i);
+ buf->vb.state = VIDEOBUF_DONE;
+ buf->vb.field_count++;
+ do_gettimeofday(&buf->vb.ts);
+
+ list_del(&buf->vb.queue);
+ wake_up(&buf->vb.done);
+}
+
+/*
+ * Identify the tm5600/6000 buffer header type and properly handles
+ */
+static int copy_streams(u8 *data, unsigned long len,
+ struct urb *urb)
+{
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+ u8 *ptr = data, *endp = data+len, c;
+ unsigned long header = 0;
+ int rc = 0;
+ unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0;
+ struct tm6000_buffer *vbuf = NULL;
+ char *voutp = NULL;
+ unsigned int linewidth;
+
+ if (!dev->radio) {
+ /* get video buffer */
+ get_next_buf(dma_q, &vbuf);
+
+ if (!vbuf)
+ return rc;
+ voutp = videobuf_to_vmalloc(&vbuf->vb);
+
+ if (!voutp)
+ return 0;
+ }
+
+ for (ptr = data; ptr < endp;) {
+ if (!dev->isoc_ctl.cmd) {
+ /* Header */
+ if (dev->isoc_ctl.tmp_buf_len > 0) {
+ /* from last urb or packet */
+ header = dev->isoc_ctl.tmp_buf;
+ if (4 - dev->isoc_ctl.tmp_buf_len > 0) {
+ memcpy((u8 *)&header +
+ dev->isoc_ctl.tmp_buf_len,
+ ptr,
+ 4 - dev->isoc_ctl.tmp_buf_len);
+ ptr += 4 - dev->isoc_ctl.tmp_buf_len;
+ }
+ dev->isoc_ctl.tmp_buf_len = 0;
+ } else {
+ if (ptr + 3 >= endp) {
+ /* have incomplete header */
+ dev->isoc_ctl.tmp_buf_len = endp - ptr;
+ memcpy(&dev->isoc_ctl.tmp_buf, ptr,
+ dev->isoc_ctl.tmp_buf_len);
+ return rc;
+ }
+ /* Seek for sync */
+ for (; ptr < endp - 3; ptr++) {
+ if (*(ptr + 3) == 0x47)
+ break;
+ }
+ /* Get message header */
+ header = *(unsigned long *)ptr;
+ ptr += 4;
+ }
+
+ /* split the header fields */
+ c = (header >> 24) & 0xff;
+ size = ((header & 0x7e) << 1);
+ if (size > 0)
+ size -= 4;
+ block = (header >> 7) & 0xf;
+ field = (header >> 11) & 0x1;
+ line = (header >> 12) & 0x1ff;
+ cmd = (header >> 21) & 0x7;
+ /* Validates haeder fields */
+ if (size > TM6000_URB_MSG_LEN)
+ size = TM6000_URB_MSG_LEN;
+ pktsize = TM6000_URB_MSG_LEN;
+ /*
+ * calculate position in buffer and change the buffer
+ */
+ switch (cmd) {
+ case TM6000_URB_MSG_VIDEO:
+ if (!dev->radio) {
+ if ((dev->isoc_ctl.vfield != field) &&
+ (field == 1)) {
+ /*
+ * Announces that a new buffer
+ * were filled
+ */
+ buffer_filled(dev, dma_q, vbuf);
+ dprintk(dev, V4L2_DEBUG_ISOC,
+ "new buffer filled\n");
+ get_next_buf(dma_q, &vbuf);
+ if (!vbuf)
+ return rc;
+ voutp = videobuf_to_vmalloc(&vbuf->vb);
+ if (!voutp)
+ return rc;
+ memset(voutp, 0, vbuf->vb.size);
+ }
+ linewidth = vbuf->vb.width << 1;
+ pos = ((line << 1) - field - 1) *
+ linewidth + block * TM6000_URB_MSG_LEN;
+ /* Don't allow to write out of the buffer */
+ if (pos + size > vbuf->vb.size)
+ cmd = TM6000_URB_MSG_ERR;
+ dev->isoc_ctl.vfield = field;
+ }
+ break;
+ case TM6000_URB_MSG_VBI:
+ break;
+ case TM6000_URB_MSG_AUDIO:
+ case TM6000_URB_MSG_PTS:
+ size = pktsize; /* Size is always 180 bytes */
+ break;
+ }
+ } else {
+ /* Continue the last copy */
+ cmd = dev->isoc_ctl.cmd;
+ size = dev->isoc_ctl.size;
+ pos = dev->isoc_ctl.pos;
+ pktsize = dev->isoc_ctl.pktsize;
+ field = dev->isoc_ctl.field;
+ }
+ cpysize = (endp - ptr > size) ? size : endp - ptr;
+ if (cpysize) {
+ /* copy data in different buffers */
+ switch (cmd) {
+ case TM6000_URB_MSG_VIDEO:
+ /* Fills video buffer */
+ if (vbuf)
+ memcpy(&voutp[pos], ptr, cpysize);
+ break;
+ case TM6000_URB_MSG_AUDIO: {
+ int i;
+ for (i = 0; i < cpysize; i += 2)
+ swab16s((u16 *)(ptr + i));
+
+ tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize);
+ break;
+ }
+ case TM6000_URB_MSG_VBI:
+ /* Need some code to copy vbi buffer */
+ break;
+ case TM6000_URB_MSG_PTS: {
+ /* Need some code to copy pts */
+ u32 pts;
+ pts = *(u32 *)ptr;
+ dprintk(dev, V4L2_DEBUG_ISOC, "field %d, PTS %x",
+ field, pts);
+ break;
+ }
+ }
+ }
+ if (ptr + pktsize > endp) {
+ /*
+ * End of URB packet, but cmd processing is not
+ * complete. Preserve the state for a next packet
+ */
+ dev->isoc_ctl.pos = pos + cpysize;
+ dev->isoc_ctl.size = size - cpysize;
+ dev->isoc_ctl.cmd = cmd;
+ dev->isoc_ctl.field = field;
+ dev->isoc_ctl.pktsize = pktsize - (endp - ptr);
+ ptr += endp - ptr;
+ } else {
+ dev->isoc_ctl.cmd = 0;
+ ptr += pktsize;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Identify the tm5600/6000 buffer header type and properly handles
+ */
+static int copy_multiplexed(u8 *ptr, unsigned long len,
+ struct urb *urb)
+{
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+ unsigned int pos = dev->isoc_ctl.pos, cpysize;
+ int rc = 1;
+ struct tm6000_buffer *buf;
+ char *outp = NULL;
+
+ get_next_buf(dma_q, &buf);
+ if (buf)
+ outp = videobuf_to_vmalloc(&buf->vb);
+
+ if (!outp)
+ return 0;
+
+ while (len > 0) {
+ cpysize = min(len, buf->vb.size-pos);
+ memcpy(&outp[pos], ptr, cpysize);
+ pos += cpysize;
+ ptr += cpysize;
+ len -= cpysize;
+ if (pos >= buf->vb.size) {
+ pos = 0;
+ /* Announces that a new buffer were filled */
+ buffer_filled(dev, dma_q, buf);
+ dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n");
+ get_next_buf(dma_q, &buf);
+ if (!buf)
+ break;
+ outp = videobuf_to_vmalloc(&(buf->vb));
+ if (!outp)
+ return rc;
+ pos = 0;
+ }
+ }
+
+ dev->isoc_ctl.pos = pos;
+ return rc;
+}
+
+static inline void print_err_status(struct tm6000_core *dev,
+ int packet, int status)
+{
+ char *errmsg = "Unknown";
+
+ switch (status) {
+ case -ENOENT:
+ errmsg = "unlinked synchronuously";
+ break;
+ case -ECONNRESET:
+ errmsg = "unlinked asynchronuously";
+ break;
+ case -ENOSR:
+ errmsg = "Buffer error (overrun)";
+ break;
+ case -EPIPE:
+ errmsg = "Stalled (device not responding)";
+ break;
+ case -EOVERFLOW:
+ errmsg = "Babble (bad cable?)";
+ break;
+ case -EPROTO:
+ errmsg = "Bit-stuff error (bad cable?)";
+ break;
+ case -EILSEQ:
+ errmsg = "CRC/Timeout (could be anything)";
+ break;
+ case -ETIME:
+ errmsg = "Device does not respond";
+ break;
+ }
+ if (packet < 0) {
+ dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n",
+ status, errmsg);
+ } else {
+ dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n",
+ packet, status, errmsg);
+ }
+}
+
+
+/*
+ * Controls the isoc copy of each urb packet
+ */
+static inline int tm6000_isoc_copy(struct urb *urb)
+{
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+ int i, len = 0, rc = 1, status;
+ char *p;
+
+ if (urb->status < 0) {
+ print_err_status(dev, -1, urb->status);
+ return 0;
+ }
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ status = urb->iso_frame_desc[i].status;
+
+ if (status < 0) {
+ print_err_status(dev, i, status);
+ continue;
+ }
+
+ len = urb->iso_frame_desc[i].actual_length;
+
+ if (len > 0) {
+ p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ if (!urb->iso_frame_desc[i].status) {
+ if ((dev->fourcc) == V4L2_PIX_FMT_TM6000) {
+ rc = copy_multiplexed(p, len, urb);
+ if (rc <= 0)
+ return rc;
+ } else {
+ copy_streams(p, len, urb);
+ }
+ }
+ }
+ }
+ return rc;
+}
+
+/* ------------------------------------------------------------------
+ * URB control
+ * ------------------------------------------------------------------
+ */
+
+/*
+ * IRQ callback, called by URB callback
+ */
+static void tm6000_irq_callback(struct urb *urb)
+{
+ struct tm6000_dmaqueue *dma_q = urb->context;
+ struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+ int i;
+
+ switch (urb->status) {
+ case 0:
+ case -ETIMEDOUT:
+ break;
+
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ tm6000_err("urb completion error %d.\n", urb->status);
+ break;
+ }
+
+ spin_lock(&dev->slock);
+ tm6000_isoc_copy(urb);
+ spin_unlock(&dev->slock);
+
+ /* Reset urb buffers */
+ for (i = 0; i < urb->number_of_packets; i++) {
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+
+ urb->status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (urb->status)
+ tm6000_err("urb resubmit failed (error=%i)\n",
+ urb->status);
+}
+
+/*
+ * Stop and Deallocate URBs
+ */
+static void tm6000_uninit_isoc(struct tm6000_core *dev)
+{
+ struct urb *urb;
+ int i;
+
+ dev->isoc_ctl.buf = NULL;
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ urb = dev->isoc_ctl.urb[i];
+ if (urb) {
+ usb_kill_urb(urb);
+ usb_unlink_urb(urb);
+ if (dev->isoc_ctl.transfer_buffer[i]) {
+ usb_free_coherent(dev->udev,
+ urb->transfer_buffer_length,
+ dev->isoc_ctl.transfer_buffer[i],
+ urb->transfer_dma);
+ }
+ usb_free_urb(urb);
+ dev->isoc_ctl.urb[i] = NULL;
+ }
+ dev->isoc_ctl.transfer_buffer[i] = NULL;
+ }
+
+ kfree(dev->isoc_ctl.urb);
+ kfree(dev->isoc_ctl.transfer_buffer);
+
+ dev->isoc_ctl.urb = NULL;
+ dev->isoc_ctl.transfer_buffer = NULL;
+ dev->isoc_ctl.num_bufs = 0;
+}
+
+/*
+ * Allocate URBs and start IRQ
+ */
+static int tm6000_prepare_isoc(struct tm6000_core *dev)
+{
+ struct tm6000_dmaqueue *dma_q = &dev->vidq;
+ int i, j, sb_size, pipe, size, max_packets, num_bufs = 8;
+ struct urb *urb;
+
+ /* De-allocates all pending stuff */
+ tm6000_uninit_isoc(dev);
+ /* Stop interrupt USB pipe */
+ tm6000_ir_int_stop(dev);
+
+ usb_set_interface(dev->udev,
+ dev->isoc_in.bInterfaceNumber,
+ dev->isoc_in.bAlternateSetting);
+
+ /* Start interrupt USB pipe */
+ tm6000_ir_int_start(dev);
+
+ pipe = usb_rcvisocpipe(dev->udev,
+ dev->isoc_in.endp->desc.bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK);
+
+ size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+
+ if (size > dev->isoc_in.maxsize)
+ size = dev->isoc_in.maxsize;
+
+ dev->isoc_ctl.max_pkt_size = size;
+
+ max_packets = TM6000_MAX_ISO_PACKETS;
+ sb_size = max_packets * size;
+
+ dev->isoc_ctl.num_bufs = num_bufs;
+
+ dev->isoc_ctl.urb = kmalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
+ if (!dev->isoc_ctl.urb) {
+ tm6000_err("cannot alloc memory for usb buffers\n");
+ return -ENOMEM;
+ }
+
+ dev->isoc_ctl.transfer_buffer = kmalloc(sizeof(void *)*num_bufs,
+ GFP_KERNEL);
+ if (!dev->isoc_ctl.transfer_buffer) {
+ tm6000_err("cannot allocate memory for usbtransfer\n");
+ kfree(dev->isoc_ctl.urb);
+ return -ENOMEM;
+ }
+
+ dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets"
+ " (%d bytes) of %d bytes each to handle %u size\n",
+ max_packets, num_bufs, sb_size,
+ dev->isoc_in.maxsize, size);
+
+ /* allocate urbs and transfer buffers */
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ urb = usb_alloc_urb(max_packets, GFP_KERNEL);
+ if (!urb) {
+ tm6000_err("cannot alloc isoc_ctl.urb %i\n", i);
+ tm6000_uninit_isoc(dev);
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+ dev->isoc_ctl.urb[i] = urb;
+
+ dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev,
+ sb_size, GFP_KERNEL, &urb->transfer_dma);
+ if (!dev->isoc_ctl.transfer_buffer[i]) {
+ tm6000_err("unable to allocate %i bytes for transfer"
+ " buffer %i%s\n",
+ sb_size, i,
+ in_interrupt() ? " while in int" : "");
+ tm6000_uninit_isoc(dev);
+ return -ENOMEM;
+ }
+ memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
+
+ usb_fill_bulk_urb(urb, dev->udev, pipe,
+ dev->isoc_ctl.transfer_buffer[i], sb_size,
+ tm6000_irq_callback, dma_q);
+ urb->interval = dev->isoc_in.endp->desc.bInterval;
+ urb->number_of_packets = max_packets;
+ urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+
+ for (j = 0; j < max_packets; j++) {
+ urb->iso_frame_desc[j].offset = size * j;
+ urb->iso_frame_desc[j].length = size;
+ }
+ }
+
+ return 0;
+}
+
+static int tm6000_start_thread(struct tm6000_core *dev)
+{
+ struct tm6000_dmaqueue *dma_q = &dev->vidq;
+ int i;
+
+ dma_q->frame = 0;
+ dma_q->ini_jiffies = jiffies;
+
+ init_waitqueue_head(&dma_q->wq);
+
+ /* submit urbs and enables IRQ */
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
+ if (rc) {
+ tm6000_err("submit of urb %i failed (error=%i)\n", i,
+ rc);
+ tm6000_uninit_isoc(dev);
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------
+ * Videobuf operations
+ * ------------------------------------------------------------------
+ */
+
+static int
+buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
+{
+ struct tm6000_fh *fh = vq->priv_data;
+
+ *size = fh->fmt->depth * fh->width * fh->height >> 3;
+ if (0 == *count)
+ *count = TM6000_DEF_BUF;
+
+ if (*count < TM6000_MIN_BUF)
+ *count = TM6000_MIN_BUF;
+
+ while (*size * *count > vid_limit * 1024 * 1024)
+ (*count)--;
+
+ return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf)
+{
+ struct tm6000_fh *fh = vq->priv_data;
+ struct tm6000_core *dev = fh->dev;
+ unsigned long flags;
+
+ if (in_interrupt())
+ BUG();
+
+ /* We used to wait for the buffer to finish here, but this didn't work
+ because, as we were keeping the state as VIDEOBUF_QUEUED,
+ videobuf_queue_cancel marked it as finished for us.
+ (Also, it could wedge forever if the hardware was misconfigured.)
+
+ This should be safe; by the time we get here, the buffer isn't
+ queued anymore. If we ever start marking the buffers as
+ VIDEOBUF_ACTIVE, it won't be, though.
+ */
+ spin_lock_irqsave(&dev->slock, flags);
+ if (dev->isoc_ctl.buf == buf)
+ dev->isoc_ctl.buf = NULL;
+ spin_unlock_irqrestore(&dev->slock, flags);
+
+ videobuf_vmalloc_free(&buf->vb);
+ buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int
+buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+ enum v4l2_field field)
+{
+ struct tm6000_fh *fh = vq->priv_data;
+ struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
+ struct tm6000_core *dev = fh->dev;
+ int rc = 0;
+
+ BUG_ON(NULL == fh->fmt);
+
+
+ /* FIXME: It assumes depth=2 */
+ /* The only currently supported format is 16 bits/pixel */
+ buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3;
+ if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
+ return -EINVAL;
+
+ if (buf->fmt != fh->fmt ||
+ buf->vb.width != fh->width ||
+ buf->vb.height != fh->height ||
+ buf->vb.field != field) {
+ buf->fmt = fh->fmt;
+ buf->vb.width = fh->width;
+ buf->vb.height = fh->height;
+ buf->vb.field = field;
+ buf->vb.state = VIDEOBUF_NEEDS_INIT;
+ }
+
+ if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+ rc = videobuf_iolock(vq, &buf->vb, NULL);
+ if (rc != 0)
+ goto fail;
+ }
+
+ if (!dev->isoc_ctl.num_bufs) {
+ rc = tm6000_prepare_isoc(dev);
+ if (rc < 0)
+ goto fail;
+
+ rc = tm6000_start_thread(dev);
+ if (rc < 0)
+ goto fail;
+
+ }
+
+ buf->vb.state = VIDEOBUF_PREPARED;
+ return 0;
+
+fail:
+ free_buffer(vq, buf);
+ return rc;
+}
+
+static void
+buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+ struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
+ struct tm6000_fh *fh = vq->priv_data;
+ struct tm6000_core *dev = fh->dev;
+ struct tm6000_dmaqueue *vidq = &dev->vidq;
+
+ buf->vb.state = VIDEOBUF_QUEUED;
+ list_add_tail(&buf->vb.queue, &vidq->active);
+}
+
+static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+ struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
+
+ free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops tm6000_video_qops = {
+ .buf_setup = buffer_setup,
+ .buf_prepare = buffer_prepare,
+ .buf_queue = buffer_queue,
+ .buf_release = buffer_release,
+};
+
+/* ------------------------------------------------------------------
+ * IOCTL handling
+ * ------------------------------------------------------------------
+ */
+
+static bool is_res_read(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+ /* Is the current fh handling it? if so, that's OK */
+ if (dev->resources == fh && dev->is_res_read)
+ return true;
+
+ return false;
+}
+
+static bool is_res_streaming(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+ /* Is the current fh handling it? if so, that's OK */
+ if (dev->resources == fh)
+ return true;
+
+ return false;
+}
+
+static bool res_get(struct tm6000_core *dev, struct tm6000_fh *fh,
+ bool is_res_read)
+{
+ /* Is the current fh handling it? if so, that's OK */
+ if (dev->resources == fh && dev->is_res_read == is_res_read)
+ return true;
+
+ /* is it free? */
+ if (dev->resources)
+ return false;
+
+ /* grab it */
+ dev->resources = fh;
+ dev->is_res_read = is_res_read;
+ dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n");
+ return true;
+}
+
+static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+ /* Is the current fh handling it? if so, that's OK */
+ if (dev->resources != fh)
+ return;
+
+ dev->resources = NULL;
+ dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n");
+}
+
+/* ------------------------------------------------------------------
+ * IOCTL vidioc handling
+ * ------------------------------------------------------------------
+ */
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
+
+ strlcpy(cap->driver, "tm6000", sizeof(cap->driver));
+ strlcpy(cap->card, "Trident TVMaster TM5600/6000/6010", sizeof(cap->card));
+ cap->version = TM6000_VERSION;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_STREAMING |
+ V4L2_CAP_AUDIO |
+ V4L2_CAP_READWRITE;
+
+ if (dev->tuner_type != TUNER_ABSENT)
+ cap->capabilities |= V4L2_CAP_TUNER;
+
+ return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (unlikely(f->index >= ARRAY_SIZE(format)))
+ return -EINVAL;
+
+ strlcpy(f->description, format[f->index].name, sizeof(f->description));
+ f->pixelformat = format[f->index].fourcc;
+ return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tm6000_fh *fh = priv;
+
+ f->fmt.pix.width = fh->width;
+ f->fmt.pix.height = fh->height;
+ f->fmt.pix.field = fh->vb_vidq.field;
+ f->fmt.pix.pixelformat = fh->fmt->fourcc;
+ f->fmt.pix.bytesperline =
+ (f->fmt.pix.width * fh->fmt->depth) >> 3;
+ f->fmt.pix.sizeimage =
+ f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+ return 0;
+}
+
+static struct tm6000_fmt *format_by_fourcc(unsigned int fourcc)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(format); i++)
+ if (format[i].fourcc == fourcc)
+ return format+i;
+ return NULL;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
+ struct tm6000_fmt *fmt;
+ enum v4l2_field field;
+
+ fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ if (NULL == fmt) {
+ dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Fourcc format (0x%08x)"
+ " invalid.\n", f->fmt.pix.pixelformat);
+ return -EINVAL;
+ }
+
+ field = f->fmt.pix.field;
+
+ if (field == V4L2_FIELD_ANY)
+ field = V4L2_FIELD_SEQ_TB;
+ else if (V4L2_FIELD_INTERLACED != field) {
+ dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Field type invalid.\n");
+ return -EINVAL;
+ }
+
+ tm6000_get_std_res(dev);
+
+ f->fmt.pix.width = dev->width;
+ f->fmt.pix.height = dev->height;
+
+ f->fmt.pix.width &= ~0x01;
+
+ f->fmt.pix.field = field;
+
+ f->fmt.pix.bytesperline =
+ (f->fmt.pix.width * fmt->depth) >> 3;
+ f->fmt.pix.sizeimage =
+ f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+ return 0;
+}
+
+/*FIXME: This seems to be generic enough to be at videodev2 */
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+ int ret = vidioc_try_fmt_vid_cap(file, fh, f);
+ if (ret < 0)
+ return ret;
+
+ fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ fh->width = f->fmt.pix.width;
+ fh->height = f->fmt.pix.height;
+ fh->vb_vidq.field = f->fmt.pix.field;
+ fh->type = f->type;
+
+ dev->fourcc = f->fmt.pix.pixelformat;
+
+ tm6000_set_fourcc_format(dev);
+
+ return 0;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *p)
+{
+ struct tm6000_fh *fh = priv;
+
+ return videobuf_reqbufs(&fh->vb_vidq, p);
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+ struct v4l2_buffer *p)
+{
+ struct tm6000_fh *fh = priv;
+
+ return videobuf_querybuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+ struct tm6000_fh *fh = priv;
+
+ return videobuf_qbuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+ struct tm6000_fh *fh = priv;
+
+ return videobuf_dqbuf(&fh->vb_vidq, p,
+ file->f_flags & O_NONBLOCK);
+}
+
+static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (i != fh->type)
+ return -EINVAL;
+
+ if (!res_get(dev, fh, false))
+ return -EBUSY;
+ return videobuf_streamon(&fh->vb_vidq);
+}
+
+static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (i != fh->type)
+ return -EINVAL;
+
+ videobuf_streamoff(&fh->vb_vidq);
+ res_free(dev, fh);
+
+ return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+ int rc = 0;
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ dev->norm = *norm;
+ rc = tm6000_init_analog_mode(dev);
+
+ fh->width = dev->width;
+ fh->height = dev->height;
+
+ if (rc < 0)
+ return rc;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
+
+ return 0;
+}
+
+static const char *iname[] = {
+ [TM6000_INPUT_TV] = "Television",
+ [TM6000_INPUT_COMPOSITE1] = "Composite 1",
+ [TM6000_INPUT_COMPOSITE2] = "Composite 2",
+ [TM6000_INPUT_SVIDEO] = "S-Video",
+};
+
+static int vidioc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+ unsigned int n;
+
+ n = i->index;
+ if (n >= 3)
+ return -EINVAL;
+
+ if (!dev->vinput[n].type)
+ return -EINVAL;
+
+ i->index = n;
+
+ if (dev->vinput[n].type == TM6000_INPUT_TV)
+ i->type = V4L2_INPUT_TYPE_TUNER;
+ else
+ i->type = V4L2_INPUT_TYPE_CAMERA;
+
+ strcpy(i->name, iname[dev->vinput[n].type]);
+
+ i->std = TM6000_STD;
+
+ return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ *i = dev->input;
+
+ return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+ int rc = 0;
+
+ if (i >= 3)
+ return -EINVAL;
+ if (!dev->vinput[i].type)
+ return -EINVAL;
+
+ dev->input = i;
+
+ rc = vidioc_s_std(file, priv, &dev->vfd->current_norm);
+
+ return rc;
+}
+
+/* --- controls ---------------------------------------------- */
+static int vidioc_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++)
+ if (qc->id && qc->id == tm6000_qctrl[i].id) {
+ memcpy(qc, &(tm6000_qctrl[i]),
+ sizeof(*qc));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+ int val;
+
+ /* FIXME: Probably, those won't work! Maybe we need shadow regs */
+ switch (ctrl->id) {
+ case V4L2_CID_CONTRAST:
+ val = tm6000_get_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0);
+ break;
+ case V4L2_CID_BRIGHTNESS:
+ val = tm6000_get_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0);
+ return 0;
+ case V4L2_CID_SATURATION:
+ val = tm6000_get_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0);
+ return 0;
+ case V4L2_CID_HUE:
+ val = tm6000_get_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, 0);
+ return 0;
+ case V4L2_CID_AUDIO_MUTE:
+ val = dev->ctl_mute;
+ return 0;
+ case V4L2_CID_AUDIO_VOLUME:
+ val = dev->ctl_volume;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+
+ if (val < 0)
+ return val;
+
+ ctrl->value = val;
+
+ return 0;
+}
+static int vidioc_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+ u8 val = ctrl->value;
+
+ switch (ctrl->id) {
+ case V4L2_CID_CONTRAST:
+ tm6000_set_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, val);
+ return 0;
+ case V4L2_CID_BRIGHTNESS:
+ tm6000_set_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, val);
+ return 0;
+ case V4L2_CID_SATURATION:
+ tm6000_set_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, val);
+ return 0;
+ case V4L2_CID_HUE:
+ tm6000_set_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, val);
+ return 0;
+ case V4L2_CID_AUDIO_MUTE:
+ dev->ctl_mute = val;
+ tm6000_tvaudio_set_mute(dev, val);
+ return 0;
+ case V4L2_CID_AUDIO_VOLUME:
+ dev->ctl_volume = val;
+ tm6000_set_volume(dev, val);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *t)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (unlikely(UNSET == dev->tuner_type))
+ return -EINVAL;
+ if (0 != t->index)
+ return -EINVAL;
+
+ strcpy(t->name, "Television");
+ t->type = V4L2_TUNER_ANALOG_TV;
+ t->capability = V4L2_TUNER_CAP_NORM;
+ t->rangehigh = 0xffffffffUL;
+ t->rxsubchans = V4L2_TUNER_SUB_STEREO;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
+
+ t->audmode = dev->amode;
+
+ return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *t)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (UNSET == dev->tuner_type)
+ return -EINVAL;
+ if (0 != t->index)
+ return -EINVAL;
+
+ dev->amode = t->audmode;
+ dprintk(dev, 3, "audio mode: %x\n", t->audmode);
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
+
+ return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (unlikely(UNSET == dev->tuner_type))
+ return -EINVAL;
+
+ f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
+ f->frequency = dev->freq;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f);
+
+ return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (unlikely(UNSET == dev->tuner_type))
+ return -EINVAL;
+ if (unlikely(f->tuner != 0))
+ return -EINVAL;
+ if (0 == fh->radio && V4L2_TUNER_ANALOG_TV != f->type)
+ return -EINVAL;
+ if (1 == fh->radio && V4L2_TUNER_RADIO != f->type)
+ return -EINVAL;
+
+ dev->freq = f->frequency;
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f);
+
+ return 0;
+}
+
+static int radio_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct tm6000_fh *fh = file->private_data;
+ struct tm6000_core *dev = fh->dev;
+
+ strcpy(cap->driver, "tm6000");
+ strlcpy(cap->card, dev->name, sizeof(dev->name));
+ sprintf(cap->bus_info, "USB%04x:%04x",
+ le16_to_cpu(dev->udev->descriptor.idVendor),
+ le16_to_cpu(dev->udev->descriptor.idProduct));
+ cap->version = dev->dev_type;
+ cap->capabilities = V4L2_CAP_TUNER |
+ V4L2_CAP_AUDIO |
+ V4L2_CAP_RADIO |
+ V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING;
+
+ return 0;
+}
+
+static int radio_g_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *t)
+{
+ struct tm6000_fh *fh = file->private_data;
+ struct tm6000_core *dev = fh->dev;
+
+ if (0 != t->index)
+ return -EINVAL;
+
+ memset(t, 0, sizeof(*t));
+ strcpy(t->name, "Radio");
+ t->type = V4L2_TUNER_RADIO;
+ t->rxsubchans = V4L2_TUNER_SUB_STEREO;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
+
+ return 0;
+}
+
+static int radio_s_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *t)
+{
+ struct tm6000_fh *fh = file->private_data;
+ struct tm6000_core *dev = fh->dev;
+
+ if (0 != t->index)
+ return -EINVAL;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
+
+ return 0;
+}
+
+static int radio_enum_input(struct file *file, void *priv,
+ struct v4l2_input *i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (i->index != 0)
+ return -EINVAL;
+
+ if (!dev->rinput.type)
+ return -EINVAL;
+
+ strcpy(i->name, "Radio");
+ i->type = V4L2_INPUT_TYPE_TUNER;
+
+ return 0;
+}
+
+static int radio_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (dev->input != 5)
+ return -EINVAL;
+
+ *i = dev->input - 5;
+
+ return 0;
+}
+
+static int radio_g_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ memset(a, 0, sizeof(*a));
+ strcpy(a->name, "Radio");
+ return 0;
+}
+
+static int radio_s_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ return 0;
+}
+
+static int radio_s_input(struct file *filp, void *priv, unsigned int i)
+{
+ struct tm6000_fh *fh = priv;
+ struct tm6000_core *dev = fh->dev;
+
+ if (i)
+ return -EINVAL;
+
+ if (!dev->rinput.type)
+ return -EINVAL;
+
+ dev->input = i + 5;
+
+ return 0;
+}
+
+static int radio_s_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+ return 0;
+}
+
+static int radio_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *c)
+{
+ const struct v4l2_queryctrl *ctrl;
+
+ if (c->id < V4L2_CID_BASE ||
+ c->id >= V4L2_CID_LASTP1)
+ return -EINVAL;
+ if (c->id == V4L2_CID_AUDIO_MUTE) {
+ ctrl = ctrl_by_id(c->id);
+ *c = *ctrl;
+ } else
+ *c = no_ctrl;
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------
+ File operations for the device
+ ------------------------------------------------------------------*/
+
+static int tm6000_open(struct file *file)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct tm6000_core *dev = video_drvdata(file);
+ struct tm6000_fh *fh;
+ enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ int i, rc;
+ int radio = 0;
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called (dev=%s)\n",
+ video_device_node_name(vdev));
+
+ switch (vdev->vfl_type) {
+ case VFL_TYPE_GRABBER:
+ type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ break;
+ case VFL_TYPE_VBI:
+ type = V4L2_BUF_TYPE_VBI_CAPTURE;
+ break;
+ case VFL_TYPE_RADIO:
+ radio = 1;
+ break;
+ }
+
+ /* If more than one user, mutex should be added */
+ dev->users++;
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "open dev=%s type=%s users=%d\n",
+ video_device_node_name(vdev), v4l2_type_names[type],
+ dev->users);
+
+ /* allocate + initialize per filehandle data */
+ fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+ if (NULL == fh) {
+ dev->users--;
+ return -ENOMEM;
+ }
+
+ file->private_data = fh;
+ fh->dev = dev;
+ fh->radio = radio;
+ dev->radio = radio;
+ fh->type = type;
+ dev->fourcc = format[0].fourcc;
+
+ fh->fmt = format_by_fourcc(dev->fourcc);
+
+ tm6000_get_std_res(dev);
+
+ fh->width = dev->width;
+ fh->height = dev->height;
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, "
+ "dev->vidq=0x%08lx\n",
+ (unsigned long)fh, (unsigned long)dev,
+ (unsigned long)&dev->vidq);
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
+ "queued=%d\n", list_empty(&dev->vidq.queued));
+ dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
+ "active=%d\n", list_empty(&dev->vidq.active));
+
+ /* initialize hardware on analog mode */
+ rc = tm6000_init_analog_mode(dev);
+ if (rc < 0)
+ return rc;
+
+ if (dev->mode != TM6000_MODE_ANALOG) {
+ /* Put all controls at a sane state */
+ for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++)
+ qctl_regs[i] = tm6000_qctrl[i].default_value;
+
+ dev->mode = TM6000_MODE_ANALOG;
+ }
+
+ if (!fh->radio) {
+ videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops,
+ NULL, &dev->slock,
+ fh->type,
+ V4L2_FIELD_INTERLACED,
+ sizeof(struct tm6000_buffer), fh, &dev->lock);
+ } else {
+ dprintk(dev, V4L2_DEBUG_OPEN, "video_open: setting radio device\n");
+ dev->input = 5;
+ tm6000_set_audio_rinput(dev);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_radio);
+ tm6000_prepare_isoc(dev);
+ tm6000_start_thread(dev);
+ }
+
+ return 0;
+}
+
+static ssize_t
+tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos)
+{
+ struct tm6000_fh *fh = file->private_data;
+
+ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ if (!res_get(fh->dev, fh, true))
+ return -EBUSY;
+
+ return videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0,
+ file->f_flags & O_NONBLOCK);
+ }
+ return 0;
+}
+
+static unsigned int
+tm6000_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct tm6000_fh *fh = file->private_data;
+ struct tm6000_buffer *buf;
+
+ if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+ return POLLERR;
+
+ if (!!is_res_streaming(fh->dev, fh))
+ return POLLERR;
+
+ if (!is_res_read(fh->dev, fh)) {
+ /* streaming capture */
+ if (list_empty(&fh->vb_vidq.stream))
+ return POLLERR;
+ buf = list_entry(fh->vb_vidq.stream.next, struct tm6000_buffer, vb.stream);
+ } else {
+ /* read() capture */
+ return videobuf_poll_stream(file, &fh->vb_vidq, wait);
+ }
+ poll_wait(file, &buf->vb.done, wait);
+ if (buf->vb.state == VIDEOBUF_DONE ||
+ buf->vb.state == VIDEOBUF_ERROR)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int tm6000_release(struct file *file)
+{
+ struct tm6000_fh *fh = file->private_data;
+ struct tm6000_core *dev = fh->dev;
+ struct video_device *vdev = video_devdata(file);
+
+ dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n",
+ video_device_node_name(vdev), dev->users);
+
+ dev->users--;
+
+ res_free(dev, fh);
+
+ if (!dev->users) {
+ int err;
+
+ tm6000_uninit_isoc(dev);
+
+ if (!fh->radio)
+ videobuf_mmap_free(&fh->vb_vidq);
+
+ err = tm6000_reset(dev);
+ if (err < 0)
+ dev_err(&vdev->dev, "reset failed: %d\n", err);
+ }
+
+ kfree(fh);
+
+ return 0;
+}
+
+static int tm6000_mmap(struct file *file, struct vm_area_struct * vma)
+{
+ struct tm6000_fh *fh = file->private_data;
+
+ return videobuf_mmap_mapper(&fh->vb_vidq, vma);
+}
+
+static struct v4l2_file_operations tm6000_fops = {
+ .owner = THIS_MODULE,
+ .open = tm6000_open,
+ .release = tm6000_release,
+ .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
+ .read = tm6000_read,
+ .poll = tm6000_poll,
+ .mmap = tm6000_mmap,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_enum_input = vidioc_enum_input,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_streamon = vidioc_streamon,
+ .vidioc_streamoff = vidioc_streamoff,
+ .vidioc_reqbufs = vidioc_reqbufs,
+ .vidioc_querybuf = vidioc_querybuf,
+ .vidioc_qbuf = vidioc_qbuf,
+ .vidioc_dqbuf = vidioc_dqbuf,
+};
+
+static struct video_device tm6000_template = {
+ .name = "tm6000",
+ .fops = &tm6000_fops,
+ .ioctl_ops = &video_ioctl_ops,
+ .release = video_device_release,
+ .tvnorms = TM6000_STD,
+ .current_norm = V4L2_STD_NTSC_M,
+};
+
+static const struct v4l2_file_operations radio_fops = {
+ .owner = THIS_MODULE,
+ .open = tm6000_open,
+ .release = tm6000_release,
+ .unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
+ .vidioc_querycap = radio_querycap,
+ .vidioc_g_tuner = radio_g_tuner,
+ .vidioc_enum_input = radio_enum_input,
+ .vidioc_g_audio = radio_g_audio,
+ .vidioc_s_tuner = radio_s_tuner,
+ .vidioc_s_audio = radio_s_audio,
+ .vidioc_s_input = radio_s_input,
+ .vidioc_s_std = radio_s_std,
+ .vidioc_queryctrl = radio_queryctrl,
+ .vidioc_g_input = radio_g_input,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+};
+
+static struct video_device tm6000_radio_template = {
+ .name = "tm6000",
+ .fops = &radio_fops,
+ .ioctl_ops = &radio_ioctl_ops,
+};
+
+/* -----------------------------------------------------------------
+ * Initialization and module stuff
+ * ------------------------------------------------------------------
+ */
+
+static struct video_device *vdev_init(struct tm6000_core *dev,
+ const struct video_device
+ *template, const char *type_name)
+{
+ struct video_device *vfd;
+
+ vfd = video_device_alloc();
+ if (NULL == vfd)
+ return NULL;
+
+ *vfd = *template;
+ vfd->v4l2_dev = &dev->v4l2_dev;
+ vfd->release = video_device_release;
+ vfd->debug = tm6000_debug;
+ vfd->lock = &dev->lock;
+
+ snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name);
+
+ video_set_drvdata(vfd, dev);
+ return vfd;
+}
+
+int tm6000_v4l2_register(struct tm6000_core *dev)
+{
+ int ret = -1;
+
+ dev->vfd = vdev_init(dev, &tm6000_template, "video");
+
+ if (!dev->vfd) {
+ printk(KERN_INFO "%s: can't register video device\n",
+ dev->name);
+ return -ENOMEM;
+ }
+
+ /* init video dma queues */
+ INIT_LIST_HEAD(&dev->vidq.active);
+ INIT_LIST_HEAD(&dev->vidq.queued);
+
+ ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr);
+
+ if (ret < 0) {
+ printk(KERN_INFO "%s: can't register video device\n",
+ dev->name);
+ return ret;
+ }
+
+ printk(KERN_INFO "%s: registered device %s\n",
+ dev->name, video_device_node_name(dev->vfd));
+
+ if (dev->caps.has_radio) {
+ dev->radio_dev = vdev_init(dev, &tm6000_radio_template,
+ "radio");
+ if (!dev->radio_dev) {
+ printk(KERN_INFO "%s: can't register radio device\n",
+ dev->name);
+ return ret; /* FIXME release resource */
+ }
+
+ ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
+ radio_nr);
+ if (ret < 0) {
+ printk(KERN_INFO "%s: can't register radio device\n",
+ dev->name);
+ return ret; /* FIXME release resource */
+ }
+
+ printk(KERN_INFO "%s: registered device %s\n",
+ dev->name, video_device_node_name(dev->radio_dev));
+ }
+
+ printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret);
+ return ret;
+}
+
+int tm6000_v4l2_unregister(struct tm6000_core *dev)
+{
+ video_unregister_device(dev->vfd);
+
+ if (dev->radio_dev) {
+ if (video_is_registered(dev->radio_dev))
+ video_unregister_device(dev->radio_dev);
+ else
+ video_device_release(dev->radio_dev);
+ dev->radio_dev = NULL;
+ }
+
+ return 0;
+}
+
+int tm6000_v4l2_exit(void)
+{
+ return 0;
+}
+
+module_param(video_nr, int, 0);
+MODULE_PARM_DESC(video_nr, "Allow changing video device number");
+
+module_param_named(debug, tm6000_debug, int, 0444);
+MODULE_PARM_DESC(debug, "activates debug info");
+
+module_param(vid_limit, int, 0644);
+MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes");
+
diff --git a/drivers/media/video/tm6000/tm6000.h b/drivers/media/video/tm6000/tm6000.h
new file mode 100644
index 0000000..2777e51
--- /dev/null
+++ b/drivers/media/video/tm6000/tm6000.h
@@ -0,0 +1,398 @@
+/*
+ * tm6000.h - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ * - DVB-T support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-vmalloc.h>
+#include "tm6000-usb-isoc.h"
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <media/v4l2-device.h>
+
+#include <linux/dvb/frontend.h>
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dmxdev.h"
+
+#define TM6000_VERSION KERNEL_VERSION(0, 0, 2)
+
+/* Inputs */
+enum tm6000_itype {
+ TM6000_INPUT_TV = 1,
+ TM6000_INPUT_COMPOSITE1,
+ TM6000_INPUT_COMPOSITE2,
+ TM6000_INPUT_SVIDEO,
+ TM6000_INPUT_DVB,
+ TM6000_INPUT_RADIO,
+};
+
+enum tm6000_mux {
+ TM6000_VMUX_VIDEO_A = 1,
+ TM6000_VMUX_VIDEO_B,
+ TM6000_VMUX_VIDEO_AB,
+ TM6000_AMUX_ADC1,
+ TM6000_AMUX_ADC2,
+ TM6000_AMUX_SIF1,
+ TM6000_AMUX_SIF2,
+ TM6000_AMUX_I2S,
+};
+
+enum tm6000_devtype {
+ TM6000 = 0,
+ TM5600,
+ TM6010,
+};
+
+struct tm6000_input {
+ enum tm6000_itype type;
+ enum tm6000_mux vmux;
+ enum tm6000_mux amux;
+ unsigned int v_gpio;
+ unsigned int a_gpio;
+};
+
+/* ------------------------------------------------------------------
+ * Basic structures
+ * ------------------------------------------------------------------
+ */
+
+struct tm6000_fmt {
+ char *name;
+ u32 fourcc; /* v4l2 format id */
+ int depth;
+};
+
+/* buffer for one video frame */
+struct tm6000_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ struct tm6000_fmt *fmt;
+};
+
+struct tm6000_dmaqueue {
+ struct list_head active;
+ struct list_head queued;
+
+ /* thread for generating video stream*/
+ struct task_struct *kthread;
+ wait_queue_head_t wq;
+ /* Counters to control fps rate */
+ int frame;
+ int ini_jiffies;
+};
+
+/* device states */
+enum tm6000_core_state {
+ DEV_INITIALIZED = 0x01,
+ DEV_DISCONNECTED = 0x02,
+ DEV_MISCONFIGURED = 0x04,
+};
+
+/* io methods */
+enum tm6000_io_method {
+ IO_NONE,
+ IO_READ,
+ IO_MMAP,
+};
+
+enum tm6000_mode {
+ TM6000_MODE_UNKNOWN = 0,
+ TM6000_MODE_ANALOG,
+ TM6000_MODE_DIGITAL,
+};
+
+struct tm6000_gpio {
+ int tuner_reset;
+ int tuner_on;
+ int demod_reset;
+ int demod_on;
+ int power_led;
+ int dvb_led;
+ int ir;
+};
+
+struct tm6000_capabilities {
+ unsigned int has_tuner:1;
+ unsigned int has_tda9874:1;
+ unsigned int has_dvb:1;
+ unsigned int has_zl10353:1;
+ unsigned int has_eeprom:1;
+ unsigned int has_remote:1;
+ unsigned int has_radio:1;
+};
+
+struct tm6000_dvb {
+ struct dvb_adapter adapter;
+ struct dvb_demux demux;
+ struct dvb_frontend *frontend;
+ struct dmxdev dmxdev;
+ unsigned int streams;
+ struct urb *bulk_urb;
+ struct mutex mutex;
+};
+
+struct snd_tm6000_card {
+ struct snd_card *card;
+ spinlock_t reg_lock;
+ struct tm6000_core *core;
+ struct snd_pcm_substream *substream;
+
+ /* temporary data for buffer fill processing */
+ unsigned buf_pos;
+ unsigned period_pos;
+};
+
+struct tm6000_endpoint {
+ struct usb_host_endpoint *endp;
+ __u8 bInterfaceNumber;
+ __u8 bAlternateSetting;
+ unsigned maxsize;
+};
+
+#define TM6000_QUIRK_NO_USB_DELAY (1 << 0)
+
+struct tm6000_core {
+ /* generic device properties */
+ char name[30]; /* name (including minor) of the device */
+ int model; /* index in the device_data struct */
+ int devno; /* marks the number of this device */
+ enum tm6000_devtype dev_type; /* type of device */
+ unsigned char eedata[256]; /* Eeprom data */
+ unsigned eedata_size; /* Size of the eeprom info */
+
+ v4l2_std_id norm; /* Current norm */
+ int width, height; /* Selected resolution */
+
+ enum tm6000_core_state state;
+
+ /* Device Capabilities*/
+ struct tm6000_capabilities caps;
+
+ /* Tuner configuration */
+ int tuner_type; /* type of the tuner */
+ int tuner_addr; /* tuner address */
+
+ struct tm6000_gpio gpio;
+
+ char *ir_codes;
+
+ __u8 radio;
+
+ /* Demodulator configuration */
+ int demod_addr; /* demodulator address */
+
+ int audio_bitrate;
+ /* i2c i/o */
+ struct i2c_adapter i2c_adap;
+ struct i2c_client i2c_client;
+
+
+ /* extension */
+ struct list_head devlist;
+
+ /* video for linux */
+ int users;
+
+ /* various device info */
+ struct tm6000_fh *resources; /* Points to fh that is streaming */
+ bool is_res_read;
+
+ struct video_device *vfd;
+ struct video_device *radio_dev;
+ struct tm6000_dmaqueue vidq;
+ struct v4l2_device v4l2_dev;
+
+ int input;
+ struct tm6000_input vinput[3]; /* video input */
+ struct tm6000_input rinput; /* radio input */
+
+ int freq;
+ unsigned int fourcc;
+
+ enum tm6000_mode mode;
+
+ int ctl_mute; /* audio */
+ int ctl_volume;
+ int amode;
+
+ /* DVB-T support */
+ struct tm6000_dvb *dvb;
+
+ /* audio support */
+ struct snd_tm6000_card *adev;
+ struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */
+ atomic_t stream_started; /* stream should be running if true */
+
+ struct tm6000_IR *ir;
+
+ /* locks */
+ struct mutex lock;
+ struct mutex usb_lock;
+
+ /* usb transfer */
+ struct usb_device *udev; /* the usb device */
+
+ struct tm6000_endpoint bulk_in, bulk_out, isoc_in, isoc_out;
+ struct tm6000_endpoint int_in, int_out;
+
+ /* scaler!=0 if scaler is active*/
+ int scaler;
+
+ /* Isoc control struct */
+ struct usb_isoc_ctl isoc_ctl;
+
+ spinlock_t slock;
+
+ unsigned long quirks;
+};
+
+enum tm6000_ops_type {
+ TM6000_AUDIO = 0x10,
+ TM6000_DVB = 0x20,
+};
+
+struct tm6000_ops {
+ struct list_head next;
+ char *name;
+ enum tm6000_ops_type type;
+ int (*init)(struct tm6000_core *);
+ int (*fini)(struct tm6000_core *);
+ int (*fillbuf)(struct tm6000_core *, char *buf, int size);
+};
+
+struct tm6000_fh {
+ struct tm6000_core *dev;
+ unsigned int radio;
+
+ /* video capture */
+ struct tm6000_fmt *fmt;
+ unsigned int width, height;
+ struct videobuf_queue vb_vidq;
+
+ enum v4l2_buf_type type;
+};
+
+#define TM6000_STD (V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc| \
+ V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \
+ V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM)
+
+/* In tm6000-cards.c */
+
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
+int tm6000_cards_setup(struct tm6000_core *dev);
+void tm6000_flash_led(struct tm6000_core *dev, u8 state);
+
+/* In tm6000-core.c */
+
+int tm6000_read_write_usb(struct tm6000_core *dev, u8 reqtype, u8 req,
+ u16 value, u16 index, u8 *buf, u16 len);
+int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
+ u16 index, u16 mask);
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
+int tm6000_init(struct tm6000_core *dev);
+int tm6000_reset(struct tm6000_core *dev);
+
+int tm6000_init_analog_mode(struct tm6000_core *dev);
+int tm6000_init_digital_mode(struct tm6000_core *dev);
+int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate);
+int tm6000_set_audio_rinput(struct tm6000_core *dev);
+int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute);
+void tm6000_set_volume(struct tm6000_core *dev, int vol);
+
+int tm6000_v4l2_register(struct tm6000_core *dev);
+int tm6000_v4l2_unregister(struct tm6000_core *dev);
+int tm6000_v4l2_exit(void);
+void tm6000_set_fourcc_format(struct tm6000_core *dev);
+
+void tm6000_remove_from_devlist(struct tm6000_core *dev);
+void tm6000_add_into_devlist(struct tm6000_core *dev);
+int tm6000_register_extension(struct tm6000_ops *ops);
+void tm6000_unregister_extension(struct tm6000_ops *ops);
+void tm6000_init_extension(struct tm6000_core *dev);
+void tm6000_close_extension(struct tm6000_core *dev);
+int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
+ char *buf, int size);
+
+
+/* In tm6000-stds.c */
+void tm6000_get_std_res(struct tm6000_core *dev);
+int tm6000_set_standard(struct tm6000_core *dev);
+
+/* In tm6000-i2c.c */
+int tm6000_i2c_register(struct tm6000_core *dev);
+int tm6000_i2c_unregister(struct tm6000_core *dev);
+
+/* In tm6000-queue.c */
+
+int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma);
+
+int tm6000_vidioc_streamon(struct file *file, void *priv,
+ enum v4l2_buf_type i);
+int tm6000_vidioc_streamoff(struct file *file, void *priv,
+ enum v4l2_buf_type i);
+int tm6000_vidioc_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *rb);
+int tm6000_vidioc_querybuf(struct file *file, void *priv,
+ struct v4l2_buffer *b);
+int tm6000_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b);
+int tm6000_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b);
+ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count,
+ loff_t *f_pos);
+unsigned int tm6000_v4l2_poll(struct file *file,
+ struct poll_table_struct *wait);
+int tm6000_queue_init(struct tm6000_core *dev);
+
+/* In tm6000-alsa.c */
+/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/
+
+/* In tm6000-input.c */
+int tm6000_ir_init(struct tm6000_core *dev);
+int tm6000_ir_fini(struct tm6000_core *dev);
+void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
+int tm6000_ir_int_start(struct tm6000_core *dev);
+void tm6000_ir_int_stop(struct tm6000_core *dev);
+
+/* Debug stuff */
+
+extern int tm6000_debug;
+
+#define dprintk(dev, level, fmt, arg...) do {\
+ if (tm6000_debug & level) \
+ printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \
+ dev->name, __func__ , ##arg); } while (0)
+
+#define V4L2_DEBUG_REG 0x0004
+#define V4L2_DEBUG_I2C 0x0008
+#define V4L2_DEBUG_QUEUE 0x0010
+#define V4L2_DEBUG_ISOC 0x0020
+#define V4L2_DEBUG_RES_LOCK 0x0040 /* Resource locking */
+#define V4L2_DEBUG_OPEN 0x0080 /* video open/close debug */
+
+#define tm6000_err(fmt, arg...) do {\
+ printk(KERN_ERR "tm6000 %s :"fmt, \
+ __func__ , ##arg); } while (0)
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index c46a3bb..f22dbef 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -1695,14 +1695,17 @@
case V4L2_CID_AUDIO_BALANCE:
{
int volume, balance;
+
if (!(desc->flags & CHIP_HAS_VOLUME))
break;
- volume = max(chip->left,chip->right);
+ volume = max(chip->left, chip->right);
balance = ctrl->value;
+ chip->left = (min(65536 - balance, 32768) * volume) / 32768;
+ chip->right = (min(balance, volume * (__u16)32768)) / 32768;
- chip_write(chip,desc->leftreg,desc->volfunc(chip->left));
- chip_write(chip,desc->rightreg,desc->volfunc(chip->right));
+ chip_write(chip, desc->leftreg, desc->volfunc(chip->left));
+ chip_write(chip, desc->rightreg, desc->volfunc(chip->right));
return 0;
}
diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/video/tvp5150_reg.h
index 4240043..25a9949 100644
--- a/drivers/media/video/tvp5150_reg.h
+++ b/drivers/media/video/tvp5150_reg.h
@@ -45,7 +45,22 @@
/* Reserved 1Fh-27h */
-#define TVP5150_VIDEO_STD 0x28 /* Video standard */
+#define VIDEO_STD_MASK (0x07 >> 1)
+#define TVP5150_VIDEO_STD 0x28 /* Video standard */
+#define VIDEO_STD_AUTO_SWITCH_BIT 0x00
+#define VIDEO_STD_NTSC_MJ_BIT 0x02
+#define VIDEO_STD_PAL_BDGHIN_BIT 0x04
+#define VIDEO_STD_PAL_M_BIT 0x06
+#define VIDEO_STD_PAL_COMBINATION_N_BIT 0x08
+#define VIDEO_STD_NTSC_4_43_BIT 0x0a
+#define VIDEO_STD_SECAM_BIT 0x0c
+
+#define VIDEO_STD_NTSC_MJ_BIT_AS 0x01
+#define VIDEO_STD_PAL_BDGHIN_BIT_AS 0x03
+#define VIDEO_STD_PAL_M_BIT_AS 0x05
+#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS 0x07
+#define VIDEO_STD_NTSC_4_43_BIT_AS 0x09
+#define VIDEO_STD_SECAM_BIT_AS 0x0b
/* Reserved 29h-2bh */
diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
index b799851..2e6059a 100644
--- a/drivers/media/video/tvp7002.c
+++ b/drivers/media/video/tvp7002.c
@@ -128,7 +128,7 @@
{ TVP7002_ADC_SETUP, 0x50, TVP7002_WRITE },
{ TVP7002_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
{ TVP7002_SOG_CLAMP, 0x80, TVP7002_WRITE },
- { TVP7002_RGB_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
+ { TVP7002_RGB_COARSE_CLAMP_CTL, 0x8c, TVP7002_WRITE },
{ TVP7002_SOG_COARSE_CLAMP_CTL, 0x04, TVP7002_WRITE },
{ TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
{ 0x32, 0x18, TVP7002_RESERVED },
@@ -182,7 +182,6 @@
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
{ TVP7002_HPLL_FDBK_DIV_LSBS, 0xa0, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
- { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x0B, TVP7002_WRITE },
@@ -204,7 +203,6 @@
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x36, TVP7002_WRITE },
{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x18, TVP7002_WRITE },
- { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x9B, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x0F, TVP7002_WRITE },
@@ -226,7 +224,6 @@
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
- { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
@@ -248,7 +245,6 @@
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
- { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
@@ -270,7 +266,6 @@
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0xa5, TVP7002_WRITE },
{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
- { TVP7002_HPLL_PHASE_SEL, 0x14, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
@@ -292,7 +287,6 @@
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
- { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
@@ -314,7 +308,6 @@
{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
{ TVP7002_HPLL_FDBK_DIV_LSBS, 0xc0, TVP7002_WRITE },
{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
- { TVP7002_HPLL_PHASE_SEL, 0x16, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
@@ -687,6 +680,9 @@
u8 cpl_msb;
int index;
+ /* Return invalid preset if no active input is detected */
+ qpreset->preset = V4L2_DV_INVALID;
+
device = to_tvp7002(sd);
/* Read standards from device registers */
@@ -720,8 +716,6 @@
if (index == NUM_PRESETS) {
v4l2_dbg(1, debug, sd, "detection failed: lpf = %x, cpl = %x\n",
lpfr, cpln);
- /* Could not detect a signal, so return the 'invalid' preset */
- qpreset->preset = V4L2_DV_INVALID;
return 0;
}
diff --git a/drivers/media/video/usbvision/Makefile b/drivers/media/video/usbvision/Makefile
index 3387187..aea1e3b 100644
--- a/drivers/media/video/usbvision/Makefile
+++ b/drivers/media/video/usbvision/Makefile
@@ -2,5 +2,5 @@
obj-$(CONFIG_VIDEO_USBVISION) += usbvision.o
-EXTRA_CFLAGS += -Idrivers/media/video
-EXTRA_CFLAGS += -Idrivers/media/common/tuners
+ccflags-y += -Idrivers/media/video
+ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index e4100b1..656d4c9 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -114,6 +114,11 @@
.guid = UVC_GUID_FORMAT_RGBP,
.fcc = V4L2_PIX_FMT_RGB565,
},
+ {
+ .name = "H.264",
+ .guid = UVC_GUID_FORMAT_H264,
+ .fcc = V4L2_PIX_FMT_H264,
+ },
};
/* ------------------------------------------------------------------------
@@ -2331,6 +2336,14 @@
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_PROBE_DEF },
+ /* The Imaging Source USB CCD cameras */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x199e,
+ .idProduct = 0x8102,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0 },
/* Bodelin ProScopeHR */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_DEV_HI
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index ea71d5f..dadf11f 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -32,7 +32,7 @@
* UVC ioctls
*/
static int uvc_ioctl_ctrl_map(struct uvc_video_chain *chain,
- struct uvc_xu_control_mapping *xmap, int old)
+ struct uvc_xu_control_mapping *xmap)
{
struct uvc_control_mapping *map;
unsigned int size;
@@ -58,13 +58,6 @@
break;
case V4L2_CTRL_TYPE_MENU:
- if (old) {
- uvc_trace(UVC_TRACE_CONTROL, "V4L2_CTRL_TYPE_MENU not "
- "supported for UVCIOC_CTRL_MAP_OLD.\n");
- ret = -EINVAL;
- goto done;
- }
-
size = xmap->menu_count * sizeof(*map->menu_info);
map->menu_info = kmalloc(size, GFP_KERNEL);
if (map->menu_info == NULL) {
@@ -538,20 +531,6 @@
return 0;
}
-static void uvc_v4l2_ioctl_warn(void)
-{
- static int warned;
-
- if (warned)
- return;
-
- uvc_printk(KERN_INFO, "Deprecated UVCIOC_CTRL_{ADD,MAP_OLD,GET,SET} "
- "ioctls will be removed in 2.6.42.\n");
- uvc_printk(KERN_INFO, "See http://www.ideasonboard.org/uvc/upgrade/ "
- "for upgrade instructions.\n");
- warned = 1;
-}
-
static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
{
struct video_device *vdev = video_devdata(file);
@@ -1032,37 +1011,8 @@
uvc_trace(UVC_TRACE_IOCTL, "Unsupported ioctl 0x%08x\n", cmd);
return -EINVAL;
- /* Dynamic controls. UVCIOC_CTRL_ADD, UVCIOC_CTRL_MAP_OLD,
- * UVCIOC_CTRL_GET and UVCIOC_CTRL_SET are deprecated and scheduled for
- * removal in 2.6.42.
- */
- case __UVCIOC_CTRL_ADD:
- uvc_v4l2_ioctl_warn();
- return -EEXIST;
-
- case __UVCIOC_CTRL_MAP_OLD:
- uvc_v4l2_ioctl_warn();
- case __UVCIOC_CTRL_MAP:
case UVCIOC_CTRL_MAP:
- return uvc_ioctl_ctrl_map(chain, arg,
- cmd == __UVCIOC_CTRL_MAP_OLD);
-
- case __UVCIOC_CTRL_GET:
- case __UVCIOC_CTRL_SET:
- {
- struct uvc_xu_control *xctrl = arg;
- struct uvc_xu_control_query xqry = {
- .unit = xctrl->unit,
- .selector = xctrl->selector,
- .query = cmd == __UVCIOC_CTRL_GET
- ? UVC_GET_CUR : UVC_SET_CUR,
- .size = xctrl->size,
- .data = xctrl->data,
- };
-
- uvc_v4l2_ioctl_warn();
- return uvc_xu_ctrl_query(chain, &xqry);
- }
+ return uvc_ioctl_ctrl_map(chain, arg);
case UVCIOC_CTRL_QUERY:
return uvc_xu_ctrl_query(chain, arg);
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index ffd1158..b015e8e 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -790,8 +790,12 @@
for (i = 0; i < UVC_URBS; ++i) {
if (stream->urb_buffer[i]) {
+#ifndef CONFIG_DMA_NONCOHERENT
usb_free_coherent(stream->dev->udev, stream->urb_size,
stream->urb_buffer[i], stream->urb_dma[i]);
+#else
+ kfree(stream->urb_buffer[i]);
+#endif
stream->urb_buffer[i] = NULL;
}
}
@@ -831,9 +835,14 @@
for (; npackets > 1; npackets /= 2) {
for (i = 0; i < UVC_URBS; ++i) {
stream->urb_size = psize * npackets;
+#ifndef CONFIG_DMA_NONCOHERENT
stream->urb_buffer[i] = usb_alloc_coherent(
stream->dev->udev, stream->urb_size,
gfp_flags | __GFP_NOWARN, &stream->urb_dma[i]);
+#else
+ stream->urb_buffer[i] =
+ kmalloc(stream->urb_size, gfp_flags | __GFP_NOWARN);
+#endif
if (!stream->urb_buffer[i]) {
uvc_free_urb_buffers(stream);
break;
@@ -908,10 +917,14 @@
urb->context = stream;
urb->pipe = usb_rcvisocpipe(stream->dev->udev,
ep->desc.bEndpointAddress);
+#ifndef CONFIG_DMA_NONCOHERENT
urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_dma = stream->urb_dma[i];
+#else
+ urb->transfer_flags = URB_ISO_ASAP;
+#endif
urb->interval = ep->desc.bInterval;
urb->transfer_buffer = stream->urb_buffer[i];
- urb->transfer_dma = stream->urb_dma[i];
urb->complete = uvc_video_complete;
urb->number_of_packets = npackets;
urb->transfer_buffer_length = size;
@@ -969,8 +982,10 @@
usb_fill_bulk_urb(urb, stream->dev->udev, pipe,
stream->urb_buffer[i], size, uvc_video_complete,
stream);
+#ifndef CONFIG_DMA_NONCOHERENT
urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
urb->transfer_dma = stream->urb_dma[i];
+#endif
stream->urb[i] = urb;
}
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index cbdd49b..4c1392e 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -1,106 +1,16 @@
#ifndef _USB_VIDEO_H_
#define _USB_VIDEO_H_
+#ifndef __KERNEL__
+#error "The uvcvideo.h header is deprecated, use linux/uvcvideo.h instead."
+#endif /* __KERNEL__ */
+
#include <linux/kernel.h>
-#include <linux/videodev2.h>
-
-#ifndef __KERNEL__
-/*
- * This header provides binary compatibility with applications using the private
- * uvcvideo API. This API is deprecated and will be removed in 2.6.42.
- * Applications should be recompiled against the public linux/uvcvideo.h header.
- */
-#warn "The uvcvideo.h header is deprecated, use linux/uvcvideo.h instead."
-
-/*
- * Dynamic controls
- */
-
-/* Data types for UVC control data */
-#define UVC_CTRL_DATA_TYPE_RAW 0
-#define UVC_CTRL_DATA_TYPE_SIGNED 1
-#define UVC_CTRL_DATA_TYPE_UNSIGNED 2
-#define UVC_CTRL_DATA_TYPE_BOOLEAN 3
-#define UVC_CTRL_DATA_TYPE_ENUM 4
-#define UVC_CTRL_DATA_TYPE_BITMASK 5
-
-/* Control flags */
-#define UVC_CONTROL_SET_CUR (1 << 0)
-#define UVC_CONTROL_GET_CUR (1 << 1)
-#define UVC_CONTROL_GET_MIN (1 << 2)
-#define UVC_CONTROL_GET_MAX (1 << 3)
-#define UVC_CONTROL_GET_RES (1 << 4)
-#define UVC_CONTROL_GET_DEF (1 << 5)
-#define UVC_CONTROL_RESTORE (1 << 6)
-#define UVC_CONTROL_AUTO_UPDATE (1 << 7)
-
-#define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \
- UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \
- UVC_CONTROL_GET_DEF)
-
-struct uvc_menu_info {
- __u32 value;
- __u8 name[32];
-};
-
-struct uvc_xu_control_mapping {
- __u32 id;
- __u8 name[32];
- __u8 entity[16];
- __u8 selector;
-
- __u8 size;
- __u8 offset;
- __u32 v4l2_type;
- __u32 data_type;
-
- struct uvc_menu_info __user *menu_info;
- __u32 menu_count;
-
- __u32 reserved[4];
-};
-
-#endif
-
-struct uvc_xu_control_info {
- __u8 entity[16];
- __u8 index;
- __u8 selector;
- __u16 size;
- __u32 flags;
-};
-
-struct uvc_xu_control_mapping_old {
- __u8 reserved[64];
-};
-
-struct uvc_xu_control {
- __u8 unit;
- __u8 selector;
- __u16 size;
- __u8 __user *data;
-};
-
-#ifndef __KERNEL__
-#define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info)
-#define UVCIOC_CTRL_MAP_OLD _IOWR('U', 2, struct uvc_xu_control_mapping_old)
-#define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping)
-#define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control)
-#define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control)
-#else
-#define __UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info)
-#define __UVCIOC_CTRL_MAP_OLD _IOWR('U', 2, struct uvc_xu_control_mapping_old)
-#define __UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping)
-#define __UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control)
-#define __UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control)
-#endif
-
-#ifdef __KERNEL__
-
#include <linux/poll.h>
#include <linux/usb.h>
#include <linux/usb/video.h>
#include <linux/uvcvideo.h>
+#include <linux/videodev2.h>
#include <media/media-device.h>
#include <media/v4l2-device.h>
@@ -179,6 +89,10 @@
{ 'M', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \
0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_H264 \
+ { 'H', '2', '6', '4', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+
/* ------------------------------------------------------------------------
* Driver specific constants.
*/
@@ -698,6 +612,4 @@
void uvc_video_decode_isight(struct urb *urb, struct uvc_streaming *stream,
struct uvc_buffer *buf);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 06b6014..fc8666a 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -43,7 +43,7 @@
};
/* Small helper function to determine if the autocluster is set to manual
- mode. In that case the is_volatile flag should be ignored. */
+ mode. */
static bool is_cur_manual(const struct v4l2_ctrl *master)
{
return master->is_auto && master->cur.val == master->manual_mode_value;
@@ -937,9 +937,14 @@
break;
}
if (update_inactive) {
- ctrl->flags &= ~V4L2_CTRL_FLAG_INACTIVE;
- if (!is_cur_manual(ctrl->cluster[0]))
+ /* Note: update_inactive can only be true for auto clusters. */
+ ctrl->flags &=
+ ~(V4L2_CTRL_FLAG_INACTIVE | V4L2_CTRL_FLAG_VOLATILE);
+ if (!is_cur_manual(ctrl->cluster[0])) {
ctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
+ if (ctrl->cluster[0]->has_volatiles)
+ ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
+ }
}
if (changed || update_inactive) {
/* If a control was changed that was not one of the controls
@@ -1394,10 +1399,8 @@
type, min, max,
is_menu ? cfg->menu_skip_mask : step,
def, flags, qmenu, priv);
- if (ctrl) {
+ if (ctrl)
ctrl->is_private = cfg->is_private;
- ctrl->is_volatile = cfg->is_volatile;
- }
return ctrl;
}
EXPORT_SYMBOL(v4l2_ctrl_new_custom);
@@ -1491,6 +1494,7 @@
/* Cluster controls */
void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
{
+ bool has_volatiles = false;
int i;
/* The first control is the master control and it must not be NULL */
@@ -1500,8 +1504,11 @@
if (controls[i]) {
controls[i]->cluster = controls;
controls[i]->ncontrols = ncontrols;
+ if (controls[i]->flags & V4L2_CTRL_FLAG_VOLATILE)
+ has_volatiles = true;
}
}
+ controls[0]->has_volatiles = has_volatiles;
}
EXPORT_SYMBOL(v4l2_ctrl_cluster);
@@ -1509,22 +1516,25 @@
u8 manual_val, bool set_volatile)
{
struct v4l2_ctrl *master = controls[0];
- u32 flag;
+ u32 flag = 0;
int i;
v4l2_ctrl_cluster(ncontrols, controls);
WARN_ON(ncontrols <= 1);
WARN_ON(manual_val < master->minimum || manual_val > master->maximum);
+ WARN_ON(set_volatile && !has_op(master, g_volatile_ctrl));
master->is_auto = true;
+ master->has_volatiles = set_volatile;
master->manual_mode_value = manual_val;
master->flags |= V4L2_CTRL_FLAG_UPDATE;
- flag = is_cur_manual(master) ? 0 : V4L2_CTRL_FLAG_INACTIVE;
+
+ if (!is_cur_manual(master))
+ flag = V4L2_CTRL_FLAG_INACTIVE |
+ (set_volatile ? V4L2_CTRL_FLAG_VOLATILE : 0);
for (i = 1; i < ncontrols; i++)
- if (controls[i]) {
- controls[i]->is_volatile = set_volatile;
+ if (controls[i])
controls[i]->flags |= flag;
- }
}
EXPORT_SYMBOL(v4l2_ctrl_auto_cluster);
@@ -1579,9 +1589,6 @@
static void log_ctrl(const struct v4l2_ctrl *ctrl,
const char *prefix, const char *colon)
{
- int fl_inact = ctrl->flags & V4L2_CTRL_FLAG_INACTIVE;
- int fl_grabbed = ctrl->flags & V4L2_CTRL_FLAG_GRABBED;
-
if (ctrl->flags & (V4L2_CTRL_FLAG_DISABLED | V4L2_CTRL_FLAG_WRITE_ONLY))
return;
if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS)
@@ -1612,14 +1619,17 @@
printk(KERN_CONT "unknown type %d", ctrl->type);
break;
}
- if (fl_inact && fl_grabbed)
- printk(KERN_CONT " (inactive, grabbed)\n");
- else if (fl_inact)
- printk(KERN_CONT " (inactive)\n");
- else if (fl_grabbed)
- printk(KERN_CONT " (grabbed)\n");
- else
- printk(KERN_CONT "\n");
+ if (ctrl->flags & (V4L2_CTRL_FLAG_INACTIVE |
+ V4L2_CTRL_FLAG_GRABBED |
+ V4L2_CTRL_FLAG_VOLATILE)) {
+ if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE)
+ printk(KERN_CONT " inactive");
+ if (ctrl->flags & V4L2_CTRL_FLAG_GRABBED)
+ printk(KERN_CONT " grabbed");
+ if (ctrl->flags & V4L2_CTRL_FLAG_VOLATILE)
+ printk(KERN_CONT " volatile");
+ }
+ printk(KERN_CONT "\n");
}
/* Log all controls owned by the handler */
@@ -1959,7 +1969,8 @@
v4l2_ctrl_lock(master);
/* g_volatile_ctrl will update the new control values */
- if (has_op(master, g_volatile_ctrl) && !is_cur_manual(master)) {
+ if ((master->flags & V4L2_CTRL_FLAG_VOLATILE) ||
+ (master->has_volatiles && !is_cur_manual(master))) {
for (j = 0; j < master->ncontrols; j++)
cur_to_new(master->cluster[j]);
ret = call_op(master, g_volatile_ctrl);
@@ -2004,7 +2015,7 @@
v4l2_ctrl_lock(master);
/* g_volatile_ctrl will update the current control values */
- if (ctrl->is_volatile && !is_cur_manual(master)) {
+ if (ctrl->flags & V4L2_CTRL_FLAG_VOLATILE) {
for (i = 0; i < master->ncontrols; i++)
cur_to_new(master->cluster[i]);
ret = call_op(master, g_volatile_ctrl);
@@ -2120,6 +2131,20 @@
return 0;
}
+/* Obtain the current volatile values of an autocluster and mark them
+ as new. */
+static void update_from_auto_cluster(struct v4l2_ctrl *master)
+{
+ int i;
+
+ for (i = 0; i < master->ncontrols; i++)
+ cur_to_new(master->cluster[i]);
+ if (!call_op(master, g_volatile_ctrl))
+ for (i = 1; i < master->ncontrols; i++)
+ if (master->cluster[i])
+ master->cluster[i]->is_new = 1;
+}
+
/* Try or try-and-set controls */
static int try_set_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
struct v4l2_ext_controls *cs,
@@ -2165,6 +2190,31 @@
if (master->cluster[j])
master->cluster[j]->is_new = 0;
+ /* For volatile autoclusters that are currently in auto mode
+ we need to discover if it will be set to manual mode.
+ If so, then we have to copy the current volatile values
+ first since those will become the new manual values (which
+ may be overwritten by explicit new values from this set
+ of controls). */
+ if (master->is_auto && master->has_volatiles &&
+ !is_cur_manual(master)) {
+ /* Pick an initial non-manual value */
+ s32 new_auto_val = master->manual_mode_value + 1;
+ u32 tmp_idx = idx;
+
+ do {
+ /* Check if the auto control is part of the
+ list, and remember the new value. */
+ if (helpers[tmp_idx].ctrl == master)
+ new_auto_val = cs->controls[tmp_idx].value;
+ tmp_idx = helpers[tmp_idx].next;
+ } while (tmp_idx);
+ /* If the new value == the manual value, then copy
+ the current volatile values. */
+ if (new_auto_val == master->manual_mode_value)
+ update_from_auto_cluster(master);
+ }
+
/* Copy the new caller-supplied control values.
user_to_new() sets 'is_new' to 1. */
do {
@@ -2235,6 +2285,12 @@
if (master->cluster[i])
master->cluster[i]->is_new = 0;
+ /* For autoclusters with volatiles that are switched from auto to
+ manual mode we have to update the current volatile values since
+ those will become the initial manual values after such a switch. */
+ if (master->is_auto && master->has_volatiles && ctrl == master &&
+ !is_cur_manual(master) && *val == master->manual_mode_value)
+ update_from_auto_cluster(master);
ctrl->val = *val;
ctrl->is_new = 1;
ret = try_or_set_cluster(fh, master, true);
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 002ce13..24fd433 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -55,6 +55,19 @@
memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field))
+#define have_fmt_ops(foo) ( \
+ ops->vidioc_##foo##_fmt_vid_cap || \
+ ops->vidioc_##foo##_fmt_vid_out || \
+ ops->vidioc_##foo##_fmt_vid_cap_mplane || \
+ ops->vidioc_##foo##_fmt_vid_out_mplane || \
+ ops->vidioc_##foo##_fmt_vid_overlay || \
+ ops->vidioc_##foo##_fmt_vbi_cap || \
+ ops->vidioc_##foo##_fmt_vid_out_overlay || \
+ ops->vidioc_##foo##_fmt_vbi_out || \
+ ops->vidioc_##foo##_fmt_sliced_vbi_cap || \
+ ops->vidioc_##foo##_fmt_sliced_vbi_out || \
+ ops->vidioc_##foo##_fmt_type_private)
+
struct std_descr {
v4l2_std_id std;
const char *descr;
@@ -477,63 +490,6 @@
return -EINVAL;
}
-/**
- * fmt_sp_to_mp() - Convert a single-plane format to its multi-planar 1-plane
- * equivalent
- */
-static int fmt_sp_to_mp(const struct v4l2_format *f_sp,
- struct v4l2_format *f_mp)
-{
- struct v4l2_pix_format_mplane *pix_mp = &f_mp->fmt.pix_mp;
- const struct v4l2_pix_format *pix = &f_sp->fmt.pix;
-
- if (f_sp->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
- f_mp->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
- else if (f_sp->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
- f_mp->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
- else
- return -EINVAL;
-
- pix_mp->width = pix->width;
- pix_mp->height = pix->height;
- pix_mp->pixelformat = pix->pixelformat;
- pix_mp->field = pix->field;
- pix_mp->colorspace = pix->colorspace;
- pix_mp->num_planes = 1;
- pix_mp->plane_fmt[0].sizeimage = pix->sizeimage;
- pix_mp->plane_fmt[0].bytesperline = pix->bytesperline;
-
- return 0;
-}
-
-/**
- * fmt_mp_to_sp() - Convert a multi-planar 1-plane format to its single-planar
- * equivalent
- */
-static int fmt_mp_to_sp(const struct v4l2_format *f_mp,
- struct v4l2_format *f_sp)
-{
- const struct v4l2_pix_format_mplane *pix_mp = &f_mp->fmt.pix_mp;
- struct v4l2_pix_format *pix = &f_sp->fmt.pix;
-
- if (f_mp->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- f_sp->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- else if (f_mp->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
- f_sp->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- else
- return -EINVAL;
-
- pix->width = pix_mp->width;
- pix->height = pix_mp->height;
- pix->pixelformat = pix_mp->pixelformat;
- pix->field = pix_mp->field;
- pix->colorspace = pix_mp->colorspace;
- pix->sizeimage = pix_mp->plane_fmt[0].sizeimage;
- pix->bytesperline = pix_mp->plane_fmt[0].bytesperline;
-
- return 0;
-}
-
static long __video_do_ioctl(struct file *file,
unsigned int cmd, void *arg)
{
@@ -541,8 +497,8 @@
const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops;
void *fh = file->private_data;
struct v4l2_fh *vfh = NULL;
- struct v4l2_format f_copy;
int use_fh_prio = 0;
+ long ret_prio = 0;
long ret = -ENOTTY;
if (ops == NULL) {
@@ -562,39 +518,8 @@
use_fh_prio = test_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags);
}
- if (use_fh_prio) {
- switch (cmd) {
- case VIDIOC_S_CTRL:
- case VIDIOC_S_STD:
- case VIDIOC_S_INPUT:
- case VIDIOC_S_OUTPUT:
- case VIDIOC_S_TUNER:
- case VIDIOC_S_FREQUENCY:
- case VIDIOC_S_FMT:
- case VIDIOC_S_CROP:
- case VIDIOC_S_AUDIO:
- case VIDIOC_S_AUDOUT:
- case VIDIOC_S_EXT_CTRLS:
- case VIDIOC_S_FBUF:
- case VIDIOC_S_PRIORITY:
- case VIDIOC_S_DV_PRESET:
- case VIDIOC_S_DV_TIMINGS:
- case VIDIOC_S_JPEGCOMP:
- case VIDIOC_S_MODULATOR:
- case VIDIOC_S_PARM:
- case VIDIOC_S_HW_FREQ_SEEK:
- case VIDIOC_ENCODER_CMD:
- case VIDIOC_OVERLAY:
- case VIDIOC_REQBUFS:
- case VIDIOC_STREAMON:
- case VIDIOC_STREAMOFF:
- ret = v4l2_prio_check(vfd->prio, vfh->prio);
- if (ret)
- goto exit_prio;
- ret = -EINVAL;
- break;
- }
- }
+ if (use_fh_prio)
+ ret_prio = v4l2_prio_check(vfd->prio, vfh->prio);
switch (cmd) {
@@ -638,12 +563,14 @@
enum v4l2_priority *p = arg;
if (!ops->vidioc_s_priority && !use_fh_prio)
- break;
+ break;
dbgarg(cmd, "setting priority to %d\n", *p);
if (ops->vidioc_s_priority)
ret = ops->vidioc_s_priority(file, fh, *p);
else
- ret = v4l2_prio_change(&vfd->v4l2_dev->prio, &vfh->prio, *p);
+ ret = ret_prio ? ret_prio :
+ v4l2_prio_change(&vfd->v4l2_dev->prio,
+ &vfh->prio, *p);
break;
}
@@ -654,37 +581,37 @@
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- if (ops->vidioc_enum_fmt_vid_cap)
+ if (likely(ops->vidioc_enum_fmt_vid_cap))
ret = ops->vidioc_enum_fmt_vid_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
- if (ops->vidioc_enum_fmt_vid_cap_mplane)
+ if (likely(ops->vidioc_enum_fmt_vid_cap_mplane))
ret = ops->vidioc_enum_fmt_vid_cap_mplane(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
- if (ops->vidioc_enum_fmt_vid_overlay)
+ if (likely(ops->vidioc_enum_fmt_vid_overlay))
ret = ops->vidioc_enum_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- if (ops->vidioc_enum_fmt_vid_out)
+ if (likely(ops->vidioc_enum_fmt_vid_out))
ret = ops->vidioc_enum_fmt_vid_out(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
- if (ops->vidioc_enum_fmt_vid_out_mplane)
+ if (likely(ops->vidioc_enum_fmt_vid_out_mplane))
ret = ops->vidioc_enum_fmt_vid_out_mplane(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
- if (ops->vidioc_enum_fmt_type_private)
+ if (likely(ops->vidioc_enum_fmt_type_private))
ret = ops->vidioc_enum_fmt_type_private(file,
fh, f);
break;
default:
break;
}
- if (!ret)
+ if (likely (!ret))
dbgarg(cmd, "index=%d, type=%d, flags=%d, "
"pixelformat=%c%c%c%c, description='%s'\n",
f->index, f->type, f->flags,
@@ -693,6 +620,14 @@
(f->pixelformat >> 16) & 0xff,
(f->pixelformat >> 24) & 0xff,
f->description);
+ else if (ret == -ENOTTY &&
+ (ops->vidioc_enum_fmt_vid_cap ||
+ ops->vidioc_enum_fmt_vid_out ||
+ ops->vidioc_enum_fmt_vid_cap_mplane ||
+ ops->vidioc_enum_fmt_vid_out_mplane ||
+ ops->vidioc_enum_fmt_vid_overlay ||
+ ops->vidioc_enum_fmt_type_private))
+ ret = -EINVAL;
break;
}
case VIDIOC_G_FMT:
@@ -704,119 +639,67 @@
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- if (ops->vidioc_g_fmt_vid_cap) {
+ if (ops->vidioc_g_fmt_vid_cap)
ret = ops->vidioc_g_fmt_vid_cap(file, fh, f);
- } else if (ops->vidioc_g_fmt_vid_cap_mplane) {
- if (fmt_sp_to_mp(f, &f_copy))
- break;
- ret = ops->vidioc_g_fmt_vid_cap_mplane(file, fh,
- &f_copy);
- if (ret)
- break;
-
- /* Driver is currently in multi-planar format,
- * we can't return it in single-planar API*/
- if (f_copy.fmt.pix_mp.num_planes > 1) {
- ret = -EBUSY;
- break;
- }
-
- ret = fmt_mp_to_sp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
- if (ops->vidioc_g_fmt_vid_cap_mplane) {
+ if (ops->vidioc_g_fmt_vid_cap_mplane)
ret = ops->vidioc_g_fmt_vid_cap_mplane(file,
fh, f);
- } else if (ops->vidioc_g_fmt_vid_cap) {
- if (fmt_mp_to_sp(f, &f_copy))
- break;
- ret = ops->vidioc_g_fmt_vid_cap(file,
- fh, &f_copy);
- if (ret)
- break;
-
- ret = fmt_sp_to_mp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
- if (ops->vidioc_g_fmt_vid_overlay)
+ if (likely(ops->vidioc_g_fmt_vid_overlay))
ret = ops->vidioc_g_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- if (ops->vidioc_g_fmt_vid_out) {
+ if (ops->vidioc_g_fmt_vid_out)
ret = ops->vidioc_g_fmt_vid_out(file, fh, f);
- } else if (ops->vidioc_g_fmt_vid_out_mplane) {
- if (fmt_sp_to_mp(f, &f_copy))
- break;
- ret = ops->vidioc_g_fmt_vid_out_mplane(file, fh,
- &f_copy);
- if (ret)
- break;
-
- /* Driver is currently in multi-planar format,
- * we can't return it in single-planar API*/
- if (f_copy.fmt.pix_mp.num_planes > 1) {
- ret = -EBUSY;
- break;
- }
-
- ret = fmt_mp_to_sp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
- if (ops->vidioc_g_fmt_vid_out_mplane) {
+ if (ops->vidioc_g_fmt_vid_out_mplane)
ret = ops->vidioc_g_fmt_vid_out_mplane(file,
fh, f);
- } else if (ops->vidioc_g_fmt_vid_out) {
- if (fmt_mp_to_sp(f, &f_copy))
- break;
- ret = ops->vidioc_g_fmt_vid_out(file,
- fh, &f_copy);
- if (ret)
- break;
-
- ret = fmt_sp_to_mp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
- if (ops->vidioc_g_fmt_vid_out_overlay)
+ if (likely(ops->vidioc_g_fmt_vid_out_overlay))
ret = ops->vidioc_g_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
- if (ops->vidioc_g_fmt_vbi_cap)
+ if (likely(ops->vidioc_g_fmt_vbi_cap))
ret = ops->vidioc_g_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
- if (ops->vidioc_g_fmt_vbi_out)
+ if (likely(ops->vidioc_g_fmt_vbi_out))
ret = ops->vidioc_g_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- if (ops->vidioc_g_fmt_sliced_vbi_cap)
+ if (likely(ops->vidioc_g_fmt_sliced_vbi_cap))
ret = ops->vidioc_g_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
- if (ops->vidioc_g_fmt_sliced_vbi_out)
+ if (likely(ops->vidioc_g_fmt_sliced_vbi_out))
ret = ops->vidioc_g_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
- if (ops->vidioc_g_fmt_type_private)
+ if (likely(ops->vidioc_g_fmt_type_private))
ret = ops->vidioc_g_fmt_type_private(file,
fh, f);
break;
}
+ if (unlikely(ret == -ENOTTY && have_fmt_ops(g)))
+ ret = -EINVAL;
break;
}
@@ -824,6 +707,14 @@
{
struct v4l2_format *f = (struct v4l2_format *)arg;
+ if (!have_fmt_ops(s))
+ break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
+ ret = -EINVAL;
+
/* FIXME: Should be one dump per type */
dbgarg(cmd, "type=%s\n", prt_names(f->type, v4l2_type_names));
@@ -831,44 +722,15 @@
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
- if (ops->vidioc_s_fmt_vid_cap) {
+ if (ops->vidioc_s_fmt_vid_cap)
ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
- } else if (ops->vidioc_s_fmt_vid_cap_mplane) {
- if (fmt_sp_to_mp(f, &f_copy))
- break;
- ret = ops->vidioc_s_fmt_vid_cap_mplane(file, fh,
- &f_copy);
- if (ret)
- break;
-
- if (f_copy.fmt.pix_mp.num_planes > 1) {
- /* Drivers shouldn't adjust from 1-plane
- * to more than 1-plane formats */
- ret = -EBUSY;
- WARN_ON(1);
- break;
- }
-
- ret = fmt_mp_to_sp(&f_copy, f);
- }
break;
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
CLEAR_AFTER_FIELD(f, fmt.pix_mp);
v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp);
- if (ops->vidioc_s_fmt_vid_cap_mplane) {
+ if (ops->vidioc_s_fmt_vid_cap_mplane)
ret = ops->vidioc_s_fmt_vid_cap_mplane(file,
fh, f);
- } else if (ops->vidioc_s_fmt_vid_cap &&
- f->fmt.pix_mp.num_planes == 1) {
- if (fmt_mp_to_sp(f, &f_copy))
- break;
- ret = ops->vidioc_s_fmt_vid_cap(file,
- fh, &f_copy);
- if (ret)
- break;
-
- ret = fmt_sp_to_mp(&f_copy, f);
- }
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
CLEAR_AFTER_FIELD(f, fmt.win);
@@ -879,44 +741,15 @@
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
- if (ops->vidioc_s_fmt_vid_out) {
+ if (ops->vidioc_s_fmt_vid_out)
ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
- } else if (ops->vidioc_s_fmt_vid_out_mplane) {
- if (fmt_sp_to_mp(f, &f_copy))
- break;
- ret = ops->vidioc_s_fmt_vid_out_mplane(file, fh,
- &f_copy);
- if (ret)
- break;
-
- if (f_copy.fmt.pix_mp.num_planes > 1) {
- /* Drivers shouldn't adjust from 1-plane
- * to more than 1-plane formats */
- ret = -EBUSY;
- WARN_ON(1);
- break;
- }
-
- ret = fmt_mp_to_sp(&f_copy, f);
- }
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
CLEAR_AFTER_FIELD(f, fmt.pix_mp);
v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp);
- if (ops->vidioc_s_fmt_vid_out_mplane) {
+ if (ops->vidioc_s_fmt_vid_out_mplane)
ret = ops->vidioc_s_fmt_vid_out_mplane(file,
fh, f);
- } else if (ops->vidioc_s_fmt_vid_out &&
- f->fmt.pix_mp.num_planes == 1) {
- if (fmt_mp_to_sp(f, &f_copy))
- break;
- ret = ops->vidioc_s_fmt_vid_out(file,
- fh, &f_copy);
- if (ret)
- break;
-
- ret = fmt_mp_to_sp(&f_copy, f);
- }
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
CLEAR_AFTER_FIELD(f, fmt.win);
@@ -926,29 +759,30 @@
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
CLEAR_AFTER_FIELD(f, fmt.vbi);
- if (ops->vidioc_s_fmt_vbi_cap)
+ if (likely(ops->vidioc_s_fmt_vbi_cap))
ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
CLEAR_AFTER_FIELD(f, fmt.vbi);
- if (ops->vidioc_s_fmt_vbi_out)
+ if (likely(ops->vidioc_s_fmt_vbi_out))
ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
CLEAR_AFTER_FIELD(f, fmt.sliced);
- if (ops->vidioc_s_fmt_sliced_vbi_cap)
+ if (likely(ops->vidioc_s_fmt_sliced_vbi_cap))
ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
CLEAR_AFTER_FIELD(f, fmt.sliced);
- if (ops->vidioc_s_fmt_sliced_vbi_out)
+ if (likely(ops->vidioc_s_fmt_sliced_vbi_out))
ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
fh, f);
+
break;
case V4L2_BUF_TYPE_PRIVATE:
/* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
- if (ops->vidioc_s_fmt_type_private)
+ if (likely(ops->vidioc_s_fmt_type_private))
ret = ops->vidioc_s_fmt_type_private(file,
fh, f);
break;
@@ -965,132 +799,77 @@
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
CLEAR_AFTER_FIELD(f, fmt.pix);
- if (ops->vidioc_try_fmt_vid_cap) {
+ if (ops->vidioc_try_fmt_vid_cap)
ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
- } else if (ops->vidioc_try_fmt_vid_cap_mplane) {
- if (fmt_sp_to_mp(f, &f_copy))
- break;
- ret = ops->vidioc_try_fmt_vid_cap_mplane(file,
- fh, &f_copy);
- if (ret)
- break;
-
- if (f_copy.fmt.pix_mp.num_planes > 1) {
- /* Drivers shouldn't adjust from 1-plane
- * to more than 1-plane formats */
- ret = -EBUSY;
- WARN_ON(1);
- break;
- }
- ret = fmt_mp_to_sp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
CLEAR_AFTER_FIELD(f, fmt.pix_mp);
- if (ops->vidioc_try_fmt_vid_cap_mplane) {
+ if (ops->vidioc_try_fmt_vid_cap_mplane)
ret = ops->vidioc_try_fmt_vid_cap_mplane(file,
fh, f);
- } else if (ops->vidioc_try_fmt_vid_cap &&
- f->fmt.pix_mp.num_planes == 1) {
- if (fmt_mp_to_sp(f, &f_copy))
- break;
- ret = ops->vidioc_try_fmt_vid_cap(file,
- fh, &f_copy);
- if (ret)
- break;
-
- ret = fmt_sp_to_mp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
CLEAR_AFTER_FIELD(f, fmt.win);
- if (ops->vidioc_try_fmt_vid_overlay)
+ if (likely(ops->vidioc_try_fmt_vid_overlay))
ret = ops->vidioc_try_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
CLEAR_AFTER_FIELD(f, fmt.pix);
- if (ops->vidioc_try_fmt_vid_out) {
+ if (ops->vidioc_try_fmt_vid_out)
ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
- } else if (ops->vidioc_try_fmt_vid_out_mplane) {
- if (fmt_sp_to_mp(f, &f_copy))
- break;
- ret = ops->vidioc_try_fmt_vid_out_mplane(file,
- fh, &f_copy);
- if (ret)
- break;
-
- if (f_copy.fmt.pix_mp.num_planes > 1) {
- /* Drivers shouldn't adjust from 1-plane
- * to more than 1-plane formats */
- ret = -EBUSY;
- WARN_ON(1);
- break;
- }
- ret = fmt_mp_to_sp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
CLEAR_AFTER_FIELD(f, fmt.pix_mp);
- if (ops->vidioc_try_fmt_vid_out_mplane) {
+ if (ops->vidioc_try_fmt_vid_out_mplane)
ret = ops->vidioc_try_fmt_vid_out_mplane(file,
fh, f);
- } else if (ops->vidioc_try_fmt_vid_out &&
- f->fmt.pix_mp.num_planes == 1) {
- if (fmt_mp_to_sp(f, &f_copy))
- break;
- ret = ops->vidioc_try_fmt_vid_out(file,
- fh, &f_copy);
- if (ret)
- break;
-
- ret = fmt_sp_to_mp(&f_copy, f);
- }
if (!ret)
v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
CLEAR_AFTER_FIELD(f, fmt.win);
- if (ops->vidioc_try_fmt_vid_out_overlay)
+ if (likely(ops->vidioc_try_fmt_vid_out_overlay))
ret = ops->vidioc_try_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
CLEAR_AFTER_FIELD(f, fmt.vbi);
- if (ops->vidioc_try_fmt_vbi_cap)
+ if (likely(ops->vidioc_try_fmt_vbi_cap))
ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
CLEAR_AFTER_FIELD(f, fmt.vbi);
- if (ops->vidioc_try_fmt_vbi_out)
+ if (likely(ops->vidioc_try_fmt_vbi_out))
ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
CLEAR_AFTER_FIELD(f, fmt.sliced);
- if (ops->vidioc_try_fmt_sliced_vbi_cap)
+ if (likely(ops->vidioc_try_fmt_sliced_vbi_cap))
ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
CLEAR_AFTER_FIELD(f, fmt.sliced);
- if (ops->vidioc_try_fmt_sliced_vbi_out)
+ if (likely(ops->vidioc_try_fmt_sliced_vbi_out))
ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
/* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
- if (ops->vidioc_try_fmt_type_private)
+ if (likely(ops->vidioc_try_fmt_type_private))
ret = ops->vidioc_try_fmt_type_private(file,
fh, f);
break;
}
-
+ if (unlikely(ret == -ENOTTY && have_fmt_ops(try)))
+ ret = -EINVAL;
break;
}
/* FIXME: Those buf reqs could be handled here,
@@ -1103,6 +882,10 @@
if (!ops->vidioc_reqbufs)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
ret = check_fmt(ops, p->type);
if (ret)
break;
@@ -1168,6 +951,10 @@
if (!ops->vidioc_overlay)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "value=%d\n", *i);
ret = ops->vidioc_overlay(file, fh, *i);
break;
@@ -1193,6 +980,10 @@
if (!ops->vidioc_s_fbuf)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "capability=0x%x, flags=%d, base=0x%08lx\n",
p->capability, p->flags, (unsigned long)p->base);
v4l_print_pix_fmt(vfd, &p->fmt);
@@ -1205,6 +996,10 @@
if (!ops->vidioc_streamon)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
ret = ops->vidioc_streamon(file, fh, i);
break;
@@ -1215,6 +1010,10 @@
if (!ops->vidioc_streamoff)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "type=%s\n", prt_names(i, v4l2_type_names));
ret = ops->vidioc_streamoff(file, fh, i);
break;
@@ -1227,6 +1026,10 @@
unsigned int index = p->index, i, j = 0;
const char *descr = "";
+ if (id == 0)
+ break;
+ ret = -EINVAL;
+
/* Return norm array in a canonical way */
for (i = 0; i <= index && id; i++) {
/* last std value in the standards array is 0, so this
@@ -1262,16 +1065,15 @@
{
v4l2_std_id *id = arg;
- ret = 0;
/* Calls the specific handler */
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, id);
- else if (vfd->current_norm)
+ else if (vfd->current_norm) {
+ ret = 0;
*id = vfd->current_norm;
- else
- ret = -EINVAL;
+ }
- if (!ret)
+ if (likely(!ret))
dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
break;
}
@@ -1281,15 +1083,20 @@
dbgarg(cmd, "std=%08Lx\n", (long long unsigned)*id);
+ if (!ops->vidioc_s_std)
+ break;
+
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
+ ret = -EINVAL;
norm = (*id) & vfd->tvnorms;
if (vfd->tvnorms && !norm) /* Check if std is supported */
break;
/* Calls the specific handler */
- if (ops->vidioc_s_std)
- ret = ops->vidioc_s_std(file, fh, &norm);
- else
- ret = -EINVAL;
+ ret = ops->vidioc_s_std(file, fh, &norm);
/* Updates standard information */
if (ret >= 0)
@@ -1302,6 +1109,14 @@
if (!ops->vidioc_querystd)
break;
+ /*
+ * If nothing detected, it should return all supported
+ * Drivers just need to mask the std argument, in order
+ * to remove the standards that don't apply from the mask.
+ * This means that tuners, audio and video decoders can join
+ * their efforts to improve the standards detection
+ */
+ *p = vfd->tvnorms;
ret = ops->vidioc_querystd(file, fh, arg);
if (!ret)
dbgarg(cmd, "detected std=%08Lx\n",
@@ -1358,6 +1173,10 @@
if (!ops->vidioc_s_input)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "value=%d\n", *i);
ret = ops->vidioc_s_input(file, fh, *i);
break;
@@ -1410,6 +1229,10 @@
if (!ops->vidioc_s_output)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "value=%d\n", *i);
ret = ops->vidioc_s_output(file, fh, *i);
break;
@@ -1479,6 +1302,10 @@
if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
@@ -1504,6 +1331,8 @@
ctrl.value = p->value;
if (check_ext_ctrls(&ctrls, 1))
ret = ops->vidioc_s_ext_ctrls(file, fh, &ctrls);
+ else
+ ret = -EINVAL;
break;
}
case VIDIOC_G_EXT_CTRLS:
@@ -1515,8 +1344,10 @@
ret = v4l2_g_ext_ctrls(vfh->ctrl_handler, p);
else if (vfd->ctrl_handler)
ret = v4l2_g_ext_ctrls(vfd->ctrl_handler, p);
- else if (ops->vidioc_g_ext_ctrls && check_ext_ctrls(p, 0))
- ret = ops->vidioc_g_ext_ctrls(file, fh, p);
+ else if (ops->vidioc_g_ext_ctrls)
+ ret = check_ext_ctrls(p, 0) ?
+ ops->vidioc_g_ext_ctrls(file, fh, p) :
+ -EINVAL;
else
break;
v4l_print_ext_ctrls(cmd, vfd, p, !ret);
@@ -1530,6 +1361,10 @@
if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
!ops->vidioc_s_ext_ctrls)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
v4l_print_ext_ctrls(cmd, vfd, p, 1);
if (vfh && vfh->ctrl_handler)
ret = v4l2_s_ext_ctrls(vfh, vfh->ctrl_handler, p);
@@ -1537,6 +1372,8 @@
ret = v4l2_s_ext_ctrls(NULL, vfd->ctrl_handler, p);
else if (check_ext_ctrls(p, 0))
ret = ops->vidioc_s_ext_ctrls(file, fh, p);
+ else
+ ret = -EINVAL;
break;
}
case VIDIOC_TRY_EXT_CTRLS:
@@ -1554,6 +1391,8 @@
ret = v4l2_try_ext_ctrls(vfd->ctrl_handler, p);
else if (check_ext_ctrls(p, 0))
ret = ops->vidioc_try_ext_ctrls(file, fh, p);
+ else
+ ret = -EINVAL;
break;
}
case VIDIOC_QUERYMENU:
@@ -1614,6 +1453,10 @@
if (!ops->vidioc_s_audio)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "index=%d, name=%s, capability=0x%x, "
"mode=0x%x\n", p->index, p->name,
p->capability, p->mode);
@@ -1654,6 +1497,10 @@
if (!ops->vidioc_s_audout)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "index=%d, name=%s, capability=%d, "
"mode=%d\n", p->index, p->name,
p->capability, p->mode);
@@ -1683,6 +1530,10 @@
if (!ops->vidioc_s_modulator)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "index=%d, name=%s, capability=%d, "
"rangelow=%d, rangehigh=%d, txsubchans=%d\n",
p->index, p->name, p->capability, p->rangelow,
@@ -1709,6 +1560,10 @@
if (!ops->vidioc_s_crop)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "type=%s\n", prt_names(p->type, v4l2_type_names));
dbgrect(vfd, "", &p->c);
ret = ops->vidioc_s_crop(file, fh, p);
@@ -1752,11 +1607,15 @@
if (!ops->vidioc_g_jpegcomp)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "quality=%d, APPn=%d, APP_len=%d, "
"COM_len=%d, jpeg_markers=%d\n",
p->quality, p->APPn, p->APP_len,
p->COM_len, p->jpeg_markers);
- ret = ops->vidioc_s_jpegcomp(file, fh, p);
+ ret = ops->vidioc_s_jpegcomp(file, fh, p);
break;
}
case VIDIOC_G_ENC_INDEX:
@@ -1777,6 +1636,10 @@
if (!ops->vidioc_encoder_cmd)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
ret = ops->vidioc_encoder_cmd(file, fh, p);
if (!ret)
dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags);
@@ -1797,6 +1660,8 @@
{
struct v4l2_streamparm *p = arg;
+ if (!ops->vidioc_g_parm && !vfd->current_norm)
+ break;
if (ops->vidioc_g_parm) {
ret = check_fmt(ops, p->type);
if (ret)
@@ -1805,14 +1670,13 @@
} else {
v4l2_std_id std = vfd->current_norm;
+ ret = -EINVAL;
if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
break;
ret = 0;
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, &std);
- else if (std == 0)
- ret = -EINVAL;
if (ret == 0)
v4l2_video_std_frame_period(std,
&p->parm.capture.timeperframe);
@@ -1827,6 +1691,10 @@
if (!ops->vidioc_s_parm)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
ret = check_fmt(ops, p->type);
if (ret)
break;
@@ -1862,6 +1730,10 @@
if (!ops->vidioc_s_tuner)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
dbgarg(cmd, "index=%d, name=%s, type=%d, "
@@ -1896,6 +1768,10 @@
if (!ops->vidioc_s_frequency)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
p->tuner, p->type, p->frequency);
ret = ops->vidioc_s_frequency(file, fh, p);
@@ -1970,6 +1846,10 @@
if (!ops->vidioc_s_hw_freq_seek)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
dbgarg(cmd,
@@ -2074,6 +1954,10 @@
if (!ops->vidioc_s_dv_preset)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
dbgarg(cmd, "preset=%d\n", p->preset);
ret = ops->vidioc_s_dv_preset(file, fh, p);
@@ -2109,6 +1993,10 @@
if (!ops->vidioc_s_dv_timings)
break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
switch (p->type) {
case V4L2_DV_BT_656_1120:
@@ -2217,19 +2105,12 @@
break;
}
default:
- {
- bool valid_prio = true;
-
if (!ops->vidioc_default)
break;
- if (use_fh_prio)
- valid_prio = v4l2_prio_check(vfd->prio, vfh->prio) >= 0;
- ret = ops->vidioc_default(file, fh, valid_prio, cmd, arg);
+ ret = ops->vidioc_default(file, fh, ret_prio >= 0, cmd, arg);
break;
- }
} /* switch */
-exit_prio:
if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {
if (ret < 0) {
v4l_print_ioctl(vfd->name, cmd);
diff --git a/drivers/media/video/v4l2-mem2mem.c b/drivers/media/video/v4l2-mem2mem.c
index 3b15bf5..975d0fa 100644
--- a/drivers/media/video/v4l2-mem2mem.c
+++ b/drivers/media/video/v4l2-mem2mem.c
@@ -97,11 +97,12 @@
spin_lock_irqsave(&q_ctx->rdy_spinlock, flags);
- if (list_empty(&q_ctx->rdy_queue))
- goto end;
+ if (list_empty(&q_ctx->rdy_queue)) {
+ spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags);
+ return NULL;
+ }
b = list_entry(q_ctx->rdy_queue.next, struct v4l2_m2m_buffer, list);
-end:
spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags);
return &b->vb;
}
@@ -117,12 +118,13 @@
unsigned long flags;
spin_lock_irqsave(&q_ctx->rdy_spinlock, flags);
- if (!list_empty(&q_ctx->rdy_queue)) {
- b = list_entry(q_ctx->rdy_queue.next, struct v4l2_m2m_buffer,
- list);
- list_del(&b->list);
- q_ctx->num_rdy--;
+ if (list_empty(&q_ctx->rdy_queue)) {
+ spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags);
+ return NULL;
}
+ b = list_entry(q_ctx->rdy_queue.next, struct v4l2_m2m_buffer, list);
+ list_del(&b->list);
+ q_ctx->num_rdy--;
spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags);
return &b->vb;
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index b7967c9..179e20e 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -173,6 +173,25 @@
case VIDIOC_UNSUBSCRIBE_EVENT:
return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg);
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ case VIDIOC_DBG_G_REGISTER:
+ {
+ struct v4l2_dbg_register *p = arg;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ return v4l2_subdev_call(sd, core, g_register, p);
+ }
+ case VIDIOC_DBG_S_REGISTER:
+ {
+ struct v4l2_dbg_register *p = arg;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ return v4l2_subdev_call(sd, core, s_register, p);
+ }
+#endif
#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
case VIDIOC_SUBDEV_G_FMT: {
struct v4l2_subdev_format *format = arg;
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 3015e60..3f5c7a3 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -43,8 +43,7 @@
/**
* __vb2_buf_mem_alloc() - allocate video memory for the given buffer
*/
-static int __vb2_buf_mem_alloc(struct vb2_buffer *vb,
- unsigned long *plane_sizes)
+static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
{
struct vb2_queue *q = vb->vb2_queue;
void *mem_priv;
@@ -53,13 +52,13 @@
/* Allocate memory for all planes in this buffer */
for (plane = 0; plane < vb->num_planes; ++plane) {
mem_priv = call_memop(q, plane, alloc, q->alloc_ctx[plane],
- plane_sizes[plane]);
+ q->plane_sizes[plane]);
if (IS_ERR_OR_NULL(mem_priv))
goto free;
/* Associate allocator private data with this plane */
vb->planes[plane].mem_priv = mem_priv;
- vb->v4l2_planes[plane].length = plane_sizes[plane];
+ vb->v4l2_planes[plane].length = q->plane_sizes[plane];
}
return 0;
@@ -141,8 +140,7 @@
* Returns the number of buffers successfully allocated.
*/
static int __vb2_queue_alloc(struct vb2_queue *q, enum v4l2_memory memory,
- unsigned int num_buffers, unsigned int num_planes,
- unsigned long plane_sizes[])
+ unsigned int num_buffers, unsigned int num_planes)
{
unsigned int buffer;
struct vb2_buffer *vb;
@@ -169,7 +167,7 @@
/* Allocate video buffer memory for the MMAP type */
if (memory == V4L2_MEMORY_MMAP) {
- ret = __vb2_buf_mem_alloc(vb, plane_sizes);
+ ret = __vb2_buf_mem_alloc(vb);
if (ret) {
dprintk(1, "Failed allocating memory for "
"buffer %d\n", buffer);
@@ -279,6 +277,41 @@
}
/**
+ * __buffer_in_use() - return true if the buffer is in use and
+ * the queue cannot be freed (by the means of REQBUFS(0)) call
+ */
+static bool __buffer_in_use(struct vb2_queue *q, struct vb2_buffer *vb)
+{
+ unsigned int plane;
+ for (plane = 0; plane < vb->num_planes; ++plane) {
+ /*
+ * If num_users() has not been provided, call_memop
+ * will return 0, apparently nobody cares about this
+ * case anyway. If num_users() returns more than 1,
+ * we are not the only user of the plane's memory.
+ */
+ if (call_memop(q, plane, num_users,
+ vb->planes[plane].mem_priv) > 1)
+ return true;
+ }
+ return false;
+}
+
+/**
+ * __buffers_in_use() - return true if any buffers on the queue are in use and
+ * the queue cannot be freed (by the means of REQBUFS(0)) call
+ */
+static bool __buffers_in_use(struct vb2_queue *q)
+{
+ unsigned int buffer;
+ for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+ if (__buffer_in_use(q, q->bufs[buffer]))
+ return true;
+ }
+ return false;
+}
+
+/**
* __fill_v4l2_buffer() - fill in a struct v4l2_buffer with information to be
* returned to userspace
*/
@@ -337,7 +370,7 @@
break;
}
- if (vb->num_planes_mapped == vb->num_planes)
+ if (__buffer_in_use(q, vb))
b->flags |= V4L2_BUF_FLAG_MAPPED;
return ret;
@@ -402,33 +435,6 @@
}
/**
- * __buffers_in_use() - return true if any buffers on the queue are in use and
- * the queue cannot be freed (by the means of REQBUFS(0)) call
- */
-static bool __buffers_in_use(struct vb2_queue *q)
-{
- unsigned int buffer, plane;
- struct vb2_buffer *vb;
-
- for (buffer = 0; buffer < q->num_buffers; ++buffer) {
- vb = q->bufs[buffer];
- for (plane = 0; plane < vb->num_planes; ++plane) {
- /*
- * If num_users() has not been provided, call_memop
- * will return 0, apparently nobody cares about this
- * case anyway. If num_users() returns more than 1,
- * we are not the only user of the plane's memory.
- */
- if (call_memop(q, plane, num_users,
- vb->planes[plane].mem_priv) > 1)
- return true;
- }
- }
-
- return false;
-}
-
-/**
* vb2_reqbufs() - Initiate streaming
* @q: videobuf2 queue
* @req: struct passed from userspace to vidioc_reqbufs handler in driver
@@ -454,7 +460,6 @@
int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
{
unsigned int num_buffers, num_planes;
- unsigned long plane_sizes[VIDEO_MAX_PLANES];
int ret = 0;
if (q->fileio) {
@@ -516,7 +521,7 @@
* Make sure the requested values and current defaults are sane.
*/
num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME);
- memset(plane_sizes, 0, sizeof(plane_sizes));
+ memset(q->plane_sizes, 0, sizeof(q->plane_sizes));
memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
q->memory = req->memory;
@@ -525,13 +530,12 @@
* Driver also sets the size and allocator context for each plane.
*/
ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes,
- plane_sizes, q->alloc_ctx);
+ q->plane_sizes, q->alloc_ctx);
if (ret)
return ret;
/* Finally, allocate buffers and video memory */
- ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes,
- plane_sizes);
+ ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes);
if (ret == 0) {
dprintk(1, "Memory allocation failed\n");
return -ENOMEM;
@@ -545,7 +549,7 @@
orig_num_buffers = num_buffers = ret;
ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes,
- plane_sizes, q->alloc_ctx);
+ q->plane_sizes, q->alloc_ctx);
if (ret)
goto free_mem;
@@ -745,12 +749,20 @@
dprintk(3, "qbuf: userspace address for plane %d changed, "
"reacquiring memory\n", plane);
+ /* Check if the provided plane buffer is large enough */
+ if (planes[plane].length < q->plane_sizes[plane]) {
+ ret = -EINVAL;
+ goto err;
+ }
+
/* Release previously acquired memory if present */
if (vb->planes[plane].mem_priv)
call_memop(q, plane, put_userptr,
vb->planes[plane].mem_priv);
vb->planes[plane].mem_priv = NULL;
+ vb->v4l2_planes[plane].m.userptr = 0;
+ vb->v4l2_planes[plane].length = 0;
/* Acquire each plane's memory */
if (q->mem_ops->get_userptr) {
@@ -788,10 +800,13 @@
return 0;
err:
/* In case of errors, release planes that were already acquired */
- for (; plane > 0; --plane) {
- call_memop(q, plane, put_userptr,
- vb->planes[plane - 1].mem_priv);
- vb->planes[plane - 1].mem_priv = NULL;
+ for (plane = 0; plane < vb->num_planes; ++plane) {
+ if (vb->planes[plane].mem_priv)
+ call_memop(q, plane, put_userptr,
+ vb->planes[plane].mem_priv);
+ vb->planes[plane].mem_priv = NULL;
+ vb->v4l2_planes[plane].m.userptr = 0;
+ vb->v4l2_planes[plane].length = 0;
}
return ret;
@@ -1096,73 +1111,6 @@
EXPORT_SYMBOL_GPL(vb2_dqbuf);
/**
- * vb2_streamon - start streaming
- * @q: videobuf2 queue
- * @type: type argument passed from userspace to vidioc_streamon handler
- *
- * Should be called from vidioc_streamon handler of a driver.
- * This function:
- * 1) verifies current state
- * 2) starts streaming and passes any previously queued buffers to the driver
- *
- * The return values from this function are intended to be directly returned
- * from vidioc_streamon handler in the driver.
- */
-int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type)
-{
- struct vb2_buffer *vb;
- int ret;
-
- if (q->fileio) {
- dprintk(1, "streamon: file io in progress\n");
- return -EBUSY;
- }
-
- if (type != q->type) {
- dprintk(1, "streamon: invalid stream type\n");
- return -EINVAL;
- }
-
- if (q->streaming) {
- dprintk(1, "streamon: already streaming\n");
- return -EBUSY;
- }
-
- /*
- * Cannot start streaming on an OUTPUT device if no buffers have
- * been queued yet.
- */
- if (V4L2_TYPE_IS_OUTPUT(q->type)) {
- if (list_empty(&q->queued_list)) {
- dprintk(1, "streamon: no output buffers queued\n");
- return -EINVAL;
- }
- }
-
- /*
- * Let driver notice that streaming state has been enabled.
- */
- ret = call_qop(q, start_streaming, q);
- if (ret) {
- dprintk(1, "streamon: driver refused to start streaming\n");
- return ret;
- }
-
- q->streaming = 1;
-
- /*
- * If any buffers were queued before streamon,
- * we can now pass them to driver for processing.
- */
- list_for_each_entry(vb, &q->queued_list, queued_entry)
- __enqueue_in_driver(vb);
-
- dprintk(3, "Streamon successful\n");
- return 0;
-}
-EXPORT_SYMBOL_GPL(vb2_streamon);
-
-/**
* __vb2_queue_cancel() - cancel and stop (pause) streaming
*
* Removes all queued buffers from driver's queue and all buffers queued by
@@ -1200,6 +1148,64 @@
}
/**
+ * vb2_streamon - start streaming
+ * @q: videobuf2 queue
+ * @type: type argument passed from userspace to vidioc_streamon handler
+ *
+ * Should be called from vidioc_streamon handler of a driver.
+ * This function:
+ * 1) verifies current state
+ * 2) passes any previously queued buffers to the driver and starts streaming
+ *
+ * The return values from this function are intended to be directly returned
+ * from vidioc_streamon handler in the driver.
+ */
+int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type)
+{
+ struct vb2_buffer *vb;
+ int ret;
+
+ if (q->fileio) {
+ dprintk(1, "streamon: file io in progress\n");
+ return -EBUSY;
+ }
+
+ if (type != q->type) {
+ dprintk(1, "streamon: invalid stream type\n");
+ return -EINVAL;
+ }
+
+ if (q->streaming) {
+ dprintk(1, "streamon: already streaming\n");
+ return -EBUSY;
+ }
+
+ /*
+ * If any buffers were queued before streamon,
+ * we can now pass them to driver for processing.
+ */
+ list_for_each_entry(vb, &q->queued_list, queued_entry)
+ __enqueue_in_driver(vb);
+
+ /*
+ * Let driver notice that streaming state has been enabled.
+ */
+ ret = call_qop(q, start_streaming, q, atomic_read(&q->queued_count));
+ if (ret) {
+ dprintk(1, "streamon: driver refused to start streaming\n");
+ __vb2_queue_cancel(q);
+ return ret;
+ }
+
+ q->streaming = 1;
+
+ dprintk(3, "Streamon successful\n");
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vb2_streamon);
+
+
+/**
* vb2_streamoff - stop streaming
* @q: videobuf2 queue
* @type: type argument passed from userspace to vidioc_streamoff handler
@@ -1336,9 +1342,6 @@
if (ret)
return ret;
- vb_plane->mapped = 1;
- vb->num_planes_mapped++;
-
dprintk(3, "Buffer %d, plane %d successfully mapped\n", buffer, plane);
return 0;
}
diff --git a/drivers/media/video/videobuf2-dma-contig.c b/drivers/media/video/videobuf2-dma-contig.c
index a790a5f..f17ad98 100644
--- a/drivers/media/video/videobuf2-dma-contig.c
+++ b/drivers/media/video/videobuf2-dma-contig.c
@@ -24,7 +24,7 @@
struct vb2_dc_buf {
struct vb2_dc_conf *conf;
void *vaddr;
- dma_addr_t paddr;
+ dma_addr_t dma_addr;
unsigned long size;
struct vm_area_struct *vma;
atomic_t refcount;
@@ -42,7 +42,7 @@
if (!buf)
return ERR_PTR(-ENOMEM);
- buf->vaddr = dma_alloc_coherent(conf->dev, size, &buf->paddr,
+ buf->vaddr = dma_alloc_coherent(conf->dev, size, &buf->dma_addr,
GFP_KERNEL);
if (!buf->vaddr) {
dev_err(conf->dev, "dma_alloc_coherent of size %ld failed\n",
@@ -69,7 +69,7 @@
if (atomic_dec_and_test(&buf->refcount)) {
dma_free_coherent(buf->conf->dev, buf->size, buf->vaddr,
- buf->paddr);
+ buf->dma_addr);
kfree(buf);
}
}
@@ -78,7 +78,7 @@
{
struct vb2_dc_buf *buf = buf_priv;
- return &buf->paddr;
+ return &buf->dma_addr;
}
static void *vb2_dma_contig_vaddr(void *buf_priv)
@@ -106,7 +106,7 @@
return -EINVAL;
}
- return vb2_mmap_pfn_range(vma, buf->paddr, buf->size,
+ return vb2_mmap_pfn_range(vma, buf->dma_addr, buf->size,
&vb2_common_vm_ops, &buf->handler);
}
@@ -115,14 +115,14 @@
{
struct vb2_dc_buf *buf;
struct vm_area_struct *vma;
- dma_addr_t paddr = 0;
+ dma_addr_t dma_addr = 0;
int ret;
buf = kzalloc(sizeof *buf, GFP_KERNEL);
if (!buf)
return ERR_PTR(-ENOMEM);
- ret = vb2_get_contig_userptr(vaddr, size, &vma, &paddr);
+ ret = vb2_get_contig_userptr(vaddr, size, &vma, &dma_addr);
if (ret) {
printk(KERN_ERR "Failed acquiring VMA for vaddr 0x%08lx\n",
vaddr);
@@ -131,7 +131,7 @@
}
buf->size = size;
- buf->paddr = paddr;
+ buf->dma_addr = dma_addr;
buf->vma = vma;
return buf;
diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c
index 065f468..3bad8b1 100644
--- a/drivers/media/video/videobuf2-dma-sg.c
+++ b/drivers/media/video/videobuf2-dma-sg.c
@@ -75,12 +75,6 @@
printk(KERN_DEBUG "%s: Allocated buffer of %d pages\n",
__func__, buf->sg_desc.num_pages);
-
- if (!buf->vaddr)
- buf->vaddr = vm_map_ram(buf->pages,
- buf->sg_desc.num_pages,
- -1,
- PAGE_KERNEL);
return buf;
fail_pages_alloc:
diff --git a/drivers/media/video/videobuf2-memops.c b/drivers/media/video/videobuf2-memops.c
index 569eeb3..71a7a78 100644
--- a/drivers/media/video/videobuf2-memops.c
+++ b/drivers/media/video/videobuf2-memops.c
@@ -68,12 +68,12 @@
if (!vma)
return;
- if (vma->vm_file)
- fput(vma->vm_file);
-
if (vma->vm_ops && vma->vm_ops->close)
vma->vm_ops->close(vma);
+ if (vma->vm_file)
+ fput(vma->vm_file);
+
kfree(vma);
}
EXPORT_SYMBOL_GPL(vb2_put_vma);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index a848bd2..7cf94c0 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -651,7 +651,7 @@
Videobuf operations
------------------------------------------------------------------*/
static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned long sizes[],
+ unsigned int *nplanes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct vivi_dev *dev = vb2_get_drv_priv(vq);
@@ -766,7 +766,7 @@
spin_unlock_irqrestore(&dev->slock, flags);
}
-static int start_streaming(struct vb2_queue *vq)
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
{
struct vivi_dev *dev = vb2_get_drv_priv(vq);
dprintk(dev, 1, "%s\n", __func__);
@@ -852,6 +852,11 @@
(f->fmt.pix.width * dev->fmt->depth) >> 3;
f->fmt.pix.sizeimage =
f->fmt.pix.height * f->fmt.pix.bytesperline;
+ if (dev->fmt->fourcc == V4L2_PIX_FMT_YUYV ||
+ dev->fmt->fourcc == V4L2_PIX_FMT_UYVY)
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ else
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
return 0;
}
@@ -885,6 +890,11 @@
(f->fmt.pix.width * fmt->depth) >> 3;
f->fmt.pix.sizeimage =
f->fmt.pix.height * f->fmt.pix.bytesperline;
+ if (fmt->fourcc == V4L2_PIX_FMT_YUYV ||
+ fmt->fourcc == V4L2_PIX_FMT_UYVY)
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ else
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
return 0;
}
@@ -948,6 +958,14 @@
return vb2_streamoff(&dev->vb_vidq, i);
}
+static int vidioc_log_status(struct file *file, void *priv)
+{
+ struct vivi_dev *dev = video_drvdata(file);
+
+ v4l2_ctrl_handler_log_status(&dev->ctrl_handler, dev->v4l2_dev.name);
+ return 0;
+}
+
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
{
return 0;
@@ -1191,6 +1209,7 @@
.vidioc_s_input = vidioc_s_input,
.vidioc_streamon = vidioc_streamon,
.vidioc_streamoff = vidioc_streamoff,
+ .vidioc_log_status = vidioc_log_status,
.vidioc_subscribe_event = vidioc_subscribe_event,
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
};
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index ca372eb..e5cad6f 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -331,7 +331,7 @@
if (pstd)
*pstd = std;
if (pstatus)
- *pstatus = status;
+ *pstatus = res;
return 0;
}
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index c492846..e78cf94 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -1638,6 +1638,9 @@
if (!cam->read_endpoint) {
dev_err(&intf->dev, "Could not find bulk-in endpoint\n");
+ video_device_release(cam->vdev);
+ kfree(cam);
+ cam = NULL;
return -ENOMEM;
}
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 7956a10..e9c6a60 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -63,6 +63,8 @@
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
+#include <linux/kthread.h>
+#include <scsi/scsi_host.h>
#include "mptbase.h"
#include "lsi/mpi_log_fc.h"
@@ -323,6 +325,32 @@
return rc;
}
+
+/**
+ * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return 0 if controller is removed from pci subsystem.
+ * Return -1 for other case.
+ */
+static int mpt_remove_dead_ioc_func(void *arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+ struct pci_dev *pdev;
+
+ if ((ioc == NULL))
+ return -1;
+
+ pdev = ioc->pcidev;
+ if ((pdev == NULL))
+ return -1;
+
+ pci_remove_bus_device(pdev);
+ return 0;
+}
+
+
+
/**
* mpt_fault_reset_work - work performed on workq after ioc fault
* @work: input argument, used to derive ioc
@@ -336,12 +364,45 @@
u32 ioc_raw_state;
int rc;
unsigned long flags;
+ MPT_SCSI_HOST *hd;
+ struct task_struct *p;
if (ioc->ioc_reset_in_progress || !ioc->active)
goto out;
+
ioc_raw_state = mpt_GetIocState(ioc, 0);
- if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
+ printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
+ ioc->name, __func__);
+
+ /*
+ * Call mptscsih_flush_pending_cmds callback so that we
+ * flush all pending commands back to OS.
+ * This call is required to aovid deadlock at block layer.
+ * Dead IOC will fail to do diag reset,and this call is safe
+ * since dead ioc will never return any command back from HW.
+ */
+ hd = shost_priv(ioc->sh);
+ ioc->schedule_dead_ioc_flush_running_cmds(hd);
+
+ /*Remove the Dead Host */
+ p = kthread_run(mpt_remove_dead_ioc_func, ioc,
+ "mpt_dead_ioc_%d", ioc->id);
+ if (IS_ERR(p)) {
+ printk(MYIOC_s_ERR_FMT
+ "%s: Running mpt_dead_ioc thread failed !\n",
+ ioc->name, __func__);
+ } else {
+ printk(MYIOC_s_WARN_FMT
+ "%s: Running mpt_dead_ioc thread success !\n",
+ ioc->name, __func__);
+ }
+ return; /* don't rearm timer */
+ }
+
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK)
+ == MPI_IOC_STATE_FAULT) {
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
@@ -6413,8 +6474,19 @@
pReq->Action, ioc->mptbase_cmds.status, timeleft));
if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
goto out;
- if (!timeleft)
+ if (!timeleft) {
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+ flags);
+ printk(MYIOC_s_INFO_FMT "%s: host reset in"
+ " progress mpt_config timed out.!!\n",
+ __func__, ioc->name);
+ return -EFAULT;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
issue_hard_reset = 1;
+ }
goto out;
}
@@ -7128,7 +7200,18 @@
spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
if (ioc->ioc_reset_in_progress) {
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
- return 0;
+ ioc->wait_on_reset_completion = 1;
+ do {
+ ssleep(1);
+ } while (ioc->ioc_reset_in_progress == 1);
+ ioc->wait_on_reset_completion = 0;
+ return ioc->reset_status;
+ }
+ if (ioc->wait_on_reset_completion) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ rc = 0;
+ time_count = jiffies;
+ goto exit;
}
ioc->ioc_reset_in_progress = 1;
if (ioc->alt_ioc)
@@ -7165,6 +7248,7 @@
ioc->ioc_reset_in_progress = 0;
ioc->taskmgmt_quiesce_io = 0;
ioc->taskmgmt_in_progress = 0;
+ ioc->reset_status = rc;
if (ioc->alt_ioc) {
ioc->alt_ioc->ioc_reset_in_progress = 0;
ioc->alt_ioc->taskmgmt_quiesce_io = 0;
@@ -7180,7 +7264,7 @@
ioc->alt_ioc, MPT_IOC_POST_RESET);
}
}
-
+exit:
dtmprintk(ioc,
printk(MYIOC_s_DEBUG_FMT
"HardResetHandler: completed (%d seconds): %s\n", ioc->name,
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index fe90233..b4d24dc 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.19"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.19"
+#define MPT_LINUX_VERSION_COMMON "3.04.20"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.20"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -554,10 +554,47 @@
u8 flags;
};
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+/*
+ * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers
+ * Private to the driver.
+ */
+
+#define MPT_HOST_BUS_UNKNOWN (0xFF)
+#define MPT_HOST_TOO_MANY_TM (0x05)
+#define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
+#define MPT_HOST_NO_CHAIN (0xFFFFFFFF)
+#define MPT_NVRAM_MASK_TIMEOUT (0x000000FF)
+#define MPT_NVRAM_SYNC_MASK (0x0000FF00)
+#define MPT_NVRAM_SYNC_SHIFT (8)
+#define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000)
+#define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000)
+#define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000)
+#define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000)
+#define MPT_NVRAM_WIDE_DISABLE (0x00100000)
+#define MPT_NVRAM_BOOT_CHOICE (0x00200000)
+
+typedef enum {
+ FC,
+ SPI,
+ SAS
+} BUS_TYPE;
+
+typedef struct _MPT_SCSI_HOST {
+ struct _MPT_ADAPTER *ioc;
+ ushort sel_timeout[MPT_MAX_FC_DEVICES];
+ char *info_kbuf;
+ long last_queue_full;
+ u16 spi_pending;
+ struct list_head target_reset_list;
+} MPT_SCSI_HOST;
+
typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
dma_addr_t dma_addr);
typedef void (*MPT_SCHEDULE_TARGET_RESET)(void *ioc);
+typedef void (*MPT_FLUSH_RUNNING_CMDS)(MPT_SCSI_HOST *hd);
/*
* Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
@@ -716,7 +753,10 @@
int taskmgmt_in_progress;
u8 taskmgmt_quiesce_io;
u8 ioc_reset_in_progress;
+ u8 reset_status;
+ u8 wait_on_reset_completion;
MPT_SCHEDULE_TARGET_RESET schedule_target_reset;
+ MPT_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
struct work_struct sas_persist_task;
struct work_struct fc_setup_reset_work;
@@ -830,19 +870,6 @@
u32 pad;
} MPT_LOCAL_REPLY;
-#define MPT_HOST_BUS_UNKNOWN (0xFF)
-#define MPT_HOST_TOO_MANY_TM (0x05)
-#define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
-#define MPT_HOST_NO_CHAIN (0xFFFFFFFF)
-#define MPT_NVRAM_MASK_TIMEOUT (0x000000FF)
-#define MPT_NVRAM_SYNC_MASK (0x0000FF00)
-#define MPT_NVRAM_SYNC_SHIFT (8)
-#define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000)
-#define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000)
-#define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000)
-#define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000)
-#define MPT_NVRAM_WIDE_DISABLE (0x00100000)
-#define MPT_NVRAM_BOOT_CHOICE (0x00200000)
/* The TM_STATE variable is used to provide strict single threading of TM
* requests as well as communicate TM error conditions.
@@ -851,21 +878,6 @@
#define TM_STATE_IN_PROGRESS (1)
#define TM_STATE_ERROR (2)
-typedef enum {
- FC,
- SPI,
- SAS
-} BUS_TYPE;
-
-typedef struct _MPT_SCSI_HOST {
- MPT_ADAPTER *ioc;
- ushort sel_timeout[MPT_MAX_FC_DEVICES];
- char *info_kbuf;
- long last_queue_full;
- u16 spi_pending;
- struct list_head target_reset_list;
-} MPT_SCSI_HOST;
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* More Dynamic Multi-Pathing stuff...
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 7596aec..9d950429 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -92,6 +92,11 @@
module_param(max_lun, int, 0);
MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+static int mpt_loadtime_max_sectors = 8192;
+module_param(mpt_loadtime_max_sectors, int, 0);
+MODULE_PARM_DESC(mpt_loadtime_max_sectors,
+ " Maximum sector define for Host Bus Adaptor.Range 64 to 8192 default=8192");
+
static u8 mptsasDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
static u8 mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
static u8 mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
@@ -285,10 +290,11 @@
spin_lock_irqsave(&ioc->fw_event_lock, flags);
list_add_tail(&fw_event->list, &ioc->fw_event_list);
INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
- devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)\n",
- ioc->name, __func__, fw_event));
- queue_delayed_work(ioc->fw_event_q, &fw_event->work,
- delay);
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)"
+ "on cpuid %d\n", ioc->name, __func__,
+ fw_event, smp_processor_id()));
+ queue_delayed_work_on(smp_processor_id(), ioc->fw_event_q,
+ &fw_event->work, delay);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
@@ -300,10 +306,11 @@
unsigned long flags;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task "
- "(fw_event=0x%p)\n", ioc->name, __func__, fw_event));
+ "(fw_event=0x%p)on cpuid %d\n", ioc->name, __func__,
+ fw_event, smp_processor_id()));
fw_event->retries++;
- queue_delayed_work(ioc->fw_event_q, &fw_event->work,
- msecs_to_jiffies(delay));
+ queue_delayed_work_on(smp_processor_id(), ioc->fw_event_q,
+ &fw_event->work, msecs_to_jiffies(delay));
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
@@ -1943,6 +1950,15 @@
goto done;
}
+ /* In case if IOC is in reset from internal context.
+ * Do not execute EEH for the same IOC. SML should to reset timer.
+ */
+ if (ioc->ioc_reset_in_progress) {
+ dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: ioc is in reset,"
+ "SML need to reset the timer (sc=%p)\n",
+ ioc->name, __func__, sc));
+ rc = BLK_EH_RESET_TIMER;
+ }
vdevice = sc->device->hostdata;
if (vdevice && vdevice->vtarget && (vdevice->vtarget->inDMD
|| vdevice->vtarget->deleted)) {
@@ -5142,6 +5158,8 @@
ioc->TaskCtx = mptsasTaskCtx;
ioc->InternalCtx = mptsasInternalCtx;
ioc->schedule_target_reset = &mptsas_schedule_target_reset;
+ ioc->schedule_dead_ioc_flush_running_cmds =
+ &mptscsih_flush_running_cmds;
/* Added sanity check on readiness of the MPT adapter.
*/
if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
@@ -5239,6 +5257,21 @@
sh->sg_tablesize = numSGE;
}
+ if (mpt_loadtime_max_sectors) {
+ if (mpt_loadtime_max_sectors < 64 ||
+ mpt_loadtime_max_sectors > 8192) {
+ printk(MYIOC_s_INFO_FMT "Invalid value passed for"
+ "mpt_loadtime_max_sectors %d."
+ "Range from 64 to 8192\n", ioc->name,
+ mpt_loadtime_max_sectors);
+ }
+ mpt_loadtime_max_sectors &= 0xFFFFFFFE;
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Resetting max sector to %d from %d\n",
+ ioc->name, mpt_loadtime_max_sectors, sh->max_sectors));
+ sh->max_sectors = mpt_loadtime_max_sectors;
+ }
+
hd = shost_priv(sh);
hd->ioc = ioc;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index ce61a57..0c3ced7 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -830,7 +830,8 @@
if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) ||
pScsiReq->CDB[0] == READ_10 ||
pScsiReq->CDB[0] == READ_12 ||
- pScsiReq->CDB[0] == READ_16 ||
+ (pScsiReq->CDB[0] == READ_16 &&
+ ((pScsiReq->CDB[1] & 0x02) == 0)) ||
pScsiReq->CDB[0] == VERIFY ||
pScsiReq->CDB[0] == VERIFY_16) {
if (scsi_bufflen(sc) !=
@@ -1024,7 +1025,7 @@
*
* Must be called while new I/Os are being queued.
*/
-static void
+void
mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
{
MPT_ADAPTER *ioc = hd->ioc;
@@ -1055,6 +1056,7 @@
sc->scsi_done(sc);
}
}
+EXPORT_SYMBOL(mptscsih_flush_running_cmds);
/*
* mptscsih_search_running_cmds - Delete any commands associated
@@ -1629,7 +1631,13 @@
return 0;
}
- if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
+ /* DOORBELL ACTIVE check is not required if
+ * MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported.
+ */
+
+ if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q)
+ && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) &&
+ (ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
printk(MYIOC_s_WARN_FMT
"TaskMgmt type=%x: ioc_state: "
"DOORBELL_ACTIVE (0x%x)!\n",
@@ -1728,7 +1736,9 @@
printk(MYIOC_s_WARN_FMT
"Issuing Reset from %s!! doorbell=0x%08x\n",
ioc->name, __func__, mpt_GetIocState(ioc, 0));
- retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
+ retval = (ioc->bus_type == SAS) ?
+ mpt_HardResetHandler(ioc, CAN_SLEEP) :
+ mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
mpt_free_msg_frame(ioc, mf);
}
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 45a5ff3..43e75ff 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -135,3 +135,4 @@
extern struct device_attribute *mptscsih_host_attrs[];
extern struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
extern void mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+extern void mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a67adcb..f1391c2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,23 +2,8 @@
# Multifunction miscellaneous devices
#
-menuconfig MFD_SUPPORT
- bool "Multifunction device drivers"
- depends on HAS_IOMEM
- default y
- help
- Multifunction devices embed several functions (e.g. GPIOs,
- touchscreens, keyboards, current regulators, power management chips,
- etc...) in one single integrated circuit. They usually talk to the
- main CPU through one or more IRQ lines and low speed data busses (SPI,
- I2C, etc..). They appear as one single device to the main system
- through the data bus and the MFD framework allows for sub devices
- (a.k.a. functions) to appear as discrete platform devices.
- MFDs are typically found on embedded platforms.
-
- This option alone does not add any kernel code.
-
-if MFD_SUPPORT
+if HAS_IOMEM
+menu "Multifunction device drivers"
config MFD_CORE
tristate
@@ -390,6 +375,7 @@
tristate "Support Wolfson Microelectronics WM8400"
select MFD_CORE
depends on I2C
+ select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
CODEC. This driver provides common support for accessing
@@ -503,6 +489,7 @@
config MFD_PCF50633
tristate "Support for NXP PCF50633"
depends on I2C
+ select REGMAP_I2C
help
Say yes here if you have NXP PCF50633 chip on your board.
This core driver provides register access and IRQ handling
@@ -579,6 +566,23 @@
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
+config AB5500_CORE
+ bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
+ depends on ABX500_CORE && MFD_DB5500_PRCMU
+ select MFD_CORE
+ help
+ Select this option to enable access to AB5500 power management
+ chip. This connects to the db5500 chip via the I2C bus via PRCMU.
+ This chip embeds various other multimedia funtionalities as well.
+
+config AB5500_DEBUG
+ bool "Enable debug info via debugfs"
+ depends on AB5500_CORE && DEBUG_FS
+ default y if DEBUG_FS
+ help
+ Select this option if you want debug information from the AB5500
+ using the debug filesystem, debugfs.
+
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE
@@ -615,20 +619,6 @@
help
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-config AB3550_CORE
- bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
- select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
- help
- Select this to enable the AB3550 Mixed Signal IC core
- functionality. This connects to a AB3550 on the I2C bus
- and expose a number of symbols needed for dependent devices
- to read and write registers and subscribe to events from
- this multi-functional IC. This is needed to use other features
- of the AB3550 such as battery-backed RTC, charging control,
- LEDs, vibrator, system power and temperature, power management
- and ALSA sound.
-
config MFD_DB8500_PRCMU
bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
depends on UX500_SOC_DB8500
@@ -773,7 +763,17 @@
additional drivers must be enabled in order to use the
functionality of the device.
-endif # MFD_SUPPORT
+config MFD_INTEL_MSIC
+ bool "Support for Intel MSIC"
+ depends on INTEL_SCU_IPC
+ select MFD_CORE
+ help
+ Select this option to enable access to Intel MSIC (Avatele
+ Passage) chip. This chip embeds audio, battery, GPIO, etc.
+ devices used in Intel Medfield platforms.
+
+endmenu
+endif
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c580203..b2292eb 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -79,7 +79,8 @@
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
-obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
+obj-$(CONFIG_AB5500_CORE) += ab5500-core.o
+obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
@@ -102,3 +103,4 @@
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 345dc65..02c4201 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -295,7 +295,7 @@
{
struct aat2870_data *aat2870 = file->private_data;
char buf[32];
- int buf_size;
+ ssize_t buf_size;
char *start = buf;
unsigned long addr, val;
int ret;
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index a20e1c4..4f57255 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -809,7 +809,7 @@
char *name;
};
-static const struct ab_family_id ids[] __devinitdata = {
+static const struct ab_family_id ids[] __devinitconst = {
/* AB3100 */
{
.id = 0xc0,
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
deleted file mode 100644
index 56ba194..0000000
--- a/drivers/mfd/ab3550-core.c
+++ /dev/null
@@ -1,1380 +0,0 @@
-/*
- * Copyright (C) 2007-2010 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB3550 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/workqueue.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <linux/mfd/abx500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-
-#define AB3550_NAME_STRING "ab3550"
-#define AB3550_ID_FORMAT_STRING "AB3550 %s"
-#define AB3550_NUM_BANKS 2
-#define AB3550_NUM_EVENT_REG 5
-
-/* These are the only registers inside AB3550 used in this main file */
-
-/* Chip ID register */
-#define AB3550_CID_REG 0x20
-
-/* Interrupt event registers */
-#define AB3550_EVENT_BANK 0
-#define AB3550_EVENT_REG 0x22
-
-/* Read/write operation values. */
-#define AB3550_PERM_RD (0x01)
-#define AB3550_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB3550_PERM_RO (AB3550_PERM_RD)
-#define AB3550_PERM_RW (AB3550_PERM_RD | AB3550_PERM_WR)
-
-/**
- * struct ab3550
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @i2c_client: I2C client for this chip
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @mask_work: a worker for writing to mask registers
- * @event_lock: a lock to protect the event_mask
- * @event_mask: a local copy of the mask event registers
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab3550 {
- struct mutex access_mutex;
- struct i2c_client *i2c_client[AB3550_NUM_BANKS];
- char chip_name[32];
- u8 chip_id;
- struct work_struct mask_work;
- spinlock_t event_lock;
- u8 event_mask[AB3550_NUM_EVENT_REG];
- u8 startup_events[AB3550_NUM_EVENT_REG];
- bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
- unsigned int debug_bank;
- unsigned int debug_address;
-#endif
-};
-
-/**
- * struct ab3550_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab3550_reg_range {
- u8 first;
- u8 last;
- u8 perm;
-};
-
-/**
- * struct ab3550_reg_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab3550_reg_ranges {
- u8 count;
- const struct ab3550_reg_range *range;
-};
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used). Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-
-static struct
-ab3550_reg_ranges ab3550_reg_ranges[AB3550_NUM_DEVICES][AB3550_NUM_BANKS] = {
- [AB3550_DEVID_DAC] = {
- NO_RANGE,
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0xb0,
- .last = 0xba,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0xbc,
- .last = 0xc3,
- .perm = AB3550_PERM_RW,
- },
- },
- },
- },
- [AB3550_DEVID_LEDS] = {
- NO_RANGE,
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x5a,
- .last = 0x88,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0x8a,
- .last = 0xad,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- },
- [AB3550_DEVID_POWER] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- NO_RANGE,
- },
- [AB3550_DEVID_REGULATORS] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x69,
- .last = 0xa3,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x14,
- .last = 0x16,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- },
- [AB3550_DEVID_SIM] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x14,
- .last = 0x17,
- .perm = AB3550_PERM_RW,
- },
- }
-
- },
- },
- [AB3550_DEVID_UART] = {
- NO_RANGE,
- NO_RANGE,
- },
- [AB3550_DEVID_RTC] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0c,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- NO_RANGE,
- },
- [AB3550_DEVID_CHARGER] = {
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x10,
- .last = 0x1a,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- NO_RANGE,
- },
- [AB3550_DEVID_ADC] = {
- NO_RANGE,
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x20,
- .last = 0x56,
- .perm = AB3550_PERM_RW,
- },
-
- }
- },
- },
- [AB3550_DEVID_FUELGAUGE] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0e,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- },
- [AB3550_DEVID_VIBRATOR] = {
- NO_RANGE,
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x10,
- .last = 0x13,
- .perm = AB3550_PERM_RW,
- },
-
- }
- },
- },
- [AB3550_DEVID_CODEC] = {
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x31,
- .last = 0x63,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0x65,
- .last = 0x68,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- NO_RANGE,
- },
-};
-
-static struct mfd_cell ab3550_devs[AB3550_NUM_DEVICES] = {
- [AB3550_DEVID_DAC] = {
- .name = "ab3550-dac",
- .id = AB3550_DEVID_DAC,
- .num_resources = 0,
- },
- [AB3550_DEVID_LEDS] = {
- .name = "ab3550-leds",
- .id = AB3550_DEVID_LEDS,
- },
- [AB3550_DEVID_POWER] = {
- .name = "ab3550-power",
- .id = AB3550_DEVID_POWER,
- },
- [AB3550_DEVID_REGULATORS] = {
- .name = "ab3550-regulators",
- .id = AB3550_DEVID_REGULATORS,
- },
- [AB3550_DEVID_SIM] = {
- .name = "ab3550-sim",
- .id = AB3550_DEVID_SIM,
- },
- [AB3550_DEVID_UART] = {
- .name = "ab3550-uart",
- .id = AB3550_DEVID_UART,
- },
- [AB3550_DEVID_RTC] = {
- .name = "ab3550-rtc",
- .id = AB3550_DEVID_RTC,
- },
- [AB3550_DEVID_CHARGER] = {
- .name = "ab3550-charger",
- .id = AB3550_DEVID_CHARGER,
- },
- [AB3550_DEVID_ADC] = {
- .name = "ab3550-adc",
- .id = AB3550_DEVID_ADC,
- .num_resources = 10,
- .resources = (struct resource[]) {
- {
- .name = "TRIGGER-0",
- .flags = IORESOURCE_IRQ,
- .start = 16,
- .end = 16,
- },
- {
- .name = "TRIGGER-1",
- .flags = IORESOURCE_IRQ,
- .start = 17,
- .end = 17,
- },
- {
- .name = "TRIGGER-2",
- .flags = IORESOURCE_IRQ,
- .start = 18,
- .end = 18,
- },
- {
- .name = "TRIGGER-3",
- .flags = IORESOURCE_IRQ,
- .start = 19,
- .end = 19,
- },
- {
- .name = "TRIGGER-4",
- .flags = IORESOURCE_IRQ,
- .start = 20,
- .end = 20,
- },
- {
- .name = "TRIGGER-5",
- .flags = IORESOURCE_IRQ,
- .start = 21,
- .end = 21,
- },
- {
- .name = "TRIGGER-6",
- .flags = IORESOURCE_IRQ,
- .start = 22,
- .end = 22,
- },
- {
- .name = "TRIGGER-7",
- .flags = IORESOURCE_IRQ,
- .start = 23,
- .end = 23,
- },
- {
- .name = "TRIGGER-VBAT-TXON",
- .flags = IORESOURCE_IRQ,
- .start = 13,
- .end = 13,
- },
- {
- .name = "TRIGGER-VBAT",
- .flags = IORESOURCE_IRQ,
- .start = 12,
- .end = 12,
- },
- },
- },
- [AB3550_DEVID_FUELGAUGE] = {
- .name = "ab3550-fuelgauge",
- .id = AB3550_DEVID_FUELGAUGE,
- },
- [AB3550_DEVID_VIBRATOR] = {
- .name = "ab3550-vibrator",
- .id = AB3550_DEVID_VIBRATOR,
- },
- [AB3550_DEVID_CODEC] = {
- .name = "ab3550-codec",
- .id = AB3550_DEVID_CODEC,
- },
-};
-
-/*
- * I2C transactions with error messages.
- */
-static int ab3550_i2c_master_send(struct ab3550 *ab, u8 bank, u8 *data,
- u8 count)
-{
- int err;
-
- err = i2c_master_send(ab->i2c_client[bank], data, count);
- if (err < 0) {
- dev_err(&ab->i2c_client[0]->dev, "send error: %d\n", err);
- return err;
- }
- return 0;
-}
-
-static int ab3550_i2c_master_recv(struct ab3550 *ab, u8 bank, u8 *data,
- u8 count)
-{
- int err;
-
- err = i2c_master_recv(ab->i2c_client[bank], data, count);
- if (err < 0) {
- dev_err(&ab->i2c_client[0]->dev, "receive error: %d\n", err);
- return err;
- }
- return 0;
-}
-
-/*
- * Functionality for getting/setting register values.
- */
-static int get_register_interruptible(struct ab3550 *ab, u8 bank, u8 reg,
- u8 *value)
-{
- int err;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- err = ab3550_i2c_master_send(ab, bank, ®, 1);
- if (!err)
- err = ab3550_i2c_master_recv(ab, bank, value, 1);
-
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-static int get_register_page_interruptible(struct ab3550 *ab, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- int err;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- err = ab3550_i2c_master_send(ab, bank, &first_reg, 1);
- if (!err)
- err = ab3550_i2c_master_recv(ab, bank, regvals, numregs);
-
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-static int mask_and_set_register_interruptible(struct ab3550 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues)
-{
- int err = 0;
-
- if (likely(bitmask)) {
- u8 reg_bits[2] = {reg, 0};
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- if (bitmask == 0xFF) /* No need to read in this case. */
- reg_bits[1] = bitvalues;
- else { /* Read and modify the register value. */
- u8 bits;
-
- err = ab3550_i2c_master_send(ab, bank, ®, 1);
- if (err)
- goto unlock_and_return;
- err = ab3550_i2c_master_recv(ab, bank, &bits, 1);
- if (err)
- goto unlock_and_return;
- reg_bits[1] = ((~bitmask & bits) |
- (bitmask & bitvalues));
- }
- /* Write the new value. */
- err = ab3550_i2c_master_send(ab, bank, reg_bits, 2);
-unlock_and_return:
- mutex_unlock(&ab->access_mutex);
- }
- return err;
-}
-
-/*
- * Read/write permission checking functions.
- */
-static bool page_write_allowed(const struct ab3550_reg_ranges *ranges,
- u8 first_reg, u8 last_reg)
-{
- u8 i;
-
- if (last_reg < first_reg)
- return false;
-
- for (i = 0; i < ranges->count; i++) {
- if (first_reg < ranges->range[i].first)
- break;
- if ((last_reg <= ranges->range[i].last) &&
- (ranges->range[i].perm & AB3550_PERM_WR))
- return true;
- }
- return false;
-}
-
-static bool reg_write_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
- return page_write_allowed(ranges, reg, reg);
-}
-
-static bool page_read_allowed(const struct ab3550_reg_ranges *ranges,
- u8 first_reg, u8 last_reg)
-{
- u8 i;
-
- if (last_reg < first_reg)
- return false;
- /* Find the range (if it exists in the list) that includes first_reg. */
- for (i = 0; i < ranges->count; i++) {
- if (first_reg < ranges->range[i].first)
- return false;
- if (first_reg <= ranges->range[i].last)
- break;
- }
- /* Make sure that the entire range up to and including last_reg is
- * readable. This may span several of the ranges in the list.
- */
- while ((i < ranges->count) &&
- (ranges->range[i].perm & AB3550_PERM_RD)) {
- if (last_reg <= ranges->range[i].last)
- return true;
- if ((++i >= ranges->count) ||
- (ranges->range[i].first !=
- (ranges->range[i - 1].last + 1))) {
- break;
- }
- }
- return false;
-}
-
-static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
- return page_read_allowed(ranges, reg, reg);
-}
-
-/*
- * The register access functionality.
- */
-static int ab3550_get_chip_id(struct device *dev)
-{
- struct ab3550 *ab = dev_get_drvdata(dev->parent);
- return (int)ab->chip_id;
-}
-
-static int ab3550_mask_and_set_register_interruptible(struct device *dev,
- u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
-{
- struct ab3550 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB3550_NUM_BANKS <= bank) ||
- !reg_write_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return mask_and_set_register_interruptible(ab, bank, reg,
- bitmask, bitvalues);
-}
-
-static int ab3550_set_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 value)
-{
- return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
- value);
-}
-
-static int ab3550_get_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 *value)
-{
- struct ab3550 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB3550_NUM_BANKS <= bank) ||
- !reg_read_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return get_register_interruptible(ab, bank, reg, value);
-}
-
-static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- struct ab3550 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB3550_NUM_BANKS <= bank) ||
- !page_read_allowed(&ab3550_reg_ranges[pdev->id][bank],
- first_reg, (first_reg + numregs - 1)))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return get_register_page_interruptible(ab, bank, first_reg, regvals,
- numregs);
-}
-
-static int ab3550_event_registers_startup_state_get(struct device *dev,
- u8 *event)
-{
- struct ab3550 *ab;
-
- ab = dev_get_drvdata(dev->parent);
- if (!ab->startup_events_read)
- return -EAGAIN; /* Try again later */
-
- memcpy(event, ab->startup_events, AB3550_NUM_EVENT_REG);
- return 0;
-}
-
-static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
-{
- struct ab3550 *ab;
- struct ab3550_platform_data *plf_data;
- bool val;
-
- ab = irq_get_chip_data(irq);
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq -= plf_data->irq.base;
- val = ((ab->startup_events[irq / 8] & BIT(irq % 8)) != 0);
-
- return val;
-}
-
-static struct abx500_ops ab3550_ops = {
- .get_chip_id = ab3550_get_chip_id,
- .get_register = ab3550_get_register_interruptible,
- .set_register = ab3550_set_register_interruptible,
- .get_register_page = ab3550_get_register_page_interruptible,
- .set_register_page = NULL,
- .mask_and_set_register = ab3550_mask_and_set_register_interruptible,
- .event_registers_startup_state_get =
- ab3550_event_registers_startup_state_get,
- .startup_irq_enabled = ab3550_startup_irq_enabled,
-};
-
-static irqreturn_t ab3550_irq_handler(int irq, void *data)
-{
- struct ab3550 *ab = data;
- int err;
- unsigned int i;
- u8 e[AB3550_NUM_EVENT_REG];
- u8 *events;
- unsigned long flags;
-
- events = (ab->startup_events_read ? e : ab->startup_events);
-
- err = get_register_page_interruptible(ab, AB3550_EVENT_BANK,
- AB3550_EVENT_REG, events, AB3550_NUM_EVENT_REG);
- if (err)
- goto err_event_rd;
-
- if (!ab->startup_events_read) {
- dev_info(&ab->i2c_client[0]->dev,
- "startup events 0x%x,0x%x,0x%x,0x%x,0x%x\n",
- ab->startup_events[0], ab->startup_events[1],
- ab->startup_events[2], ab->startup_events[3],
- ab->startup_events[4]);
- ab->startup_events_read = true;
- goto out;
- }
-
- /* The two highest bits in event[4] are not used. */
- events[4] &= 0x3f;
-
- spin_lock_irqsave(&ab->event_lock, flags);
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
- events[i] &= ~ab->event_mask[i];
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
- u8 bit;
- u8 event_reg;
-
- dev_dbg(&ab->i2c_client[0]->dev, "IRQ Event[%d]: 0x%2x\n",
- i, events[i]);
-
- event_reg = events[i];
- for (bit = 0; event_reg; bit++, event_reg /= 2) {
- if (event_reg % 2) {
- unsigned int irq;
- struct ab3550_platform_data *plf_data;
-
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq = plf_data->irq.base + (i * 8) + bit;
- handle_nested_irq(irq);
- }
- }
- }
-out:
- return IRQ_HANDLED;
-
-err_event_rd:
- dev_dbg(&ab->i2c_client[0]->dev, "error reading event registers\n");
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static struct ab3550_reg_ranges debug_ranges[AB3550_NUM_BANKS] = {
- {
- .count = 6,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0e,
- },
- {
- .first = 0x10,
- .last = 0x1a,
- },
- {
- .first = 0x1e,
- .last = 0x4f,
- },
- {
- .first = 0x51,
- .last = 0x63,
- },
- {
- .first = 0x65,
- .last = 0xa3,
- },
- {
- .first = 0xa5,
- .last = 0xa8,
- },
- }
- },
- {
- .count = 8,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0e,
- },
- {
- .first = 0x10,
- .last = 0x17,
- },
- {
- .first = 0x1a,
- .last = 0x1c,
- },
- {
- .first = 0x20,
- .last = 0x56,
- },
- {
- .first = 0x5a,
- .last = 0x88,
- },
- {
- .first = 0x8a,
- .last = 0xad,
- },
- {
- .first = 0xb0,
- .last = 0xba,
- },
- {
- .first = 0xbc,
- .last = 0xc3,
- },
- }
- },
-};
-
-static int ab3550_registers_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
- int bank;
-
- seq_printf(s, AB3550_NAME_STRING " register values:\n");
-
- for (bank = 0; bank < AB3550_NUM_BANKS; bank++) {
- unsigned int i;
-
- seq_printf(s, " bank %d:\n", bank);
- for (i = 0; i < debug_ranges[bank].count; i++) {
- u8 reg;
-
- for (reg = debug_ranges[bank].range[i].first;
- reg <= debug_ranges[bank].range[i].last;
- reg++) {
- u8 value;
-
- get_register_interruptible(ab, bank, reg,
- &value);
- seq_printf(s, " [%d/0x%02X]: 0x%02X\n", bank,
- reg, value);
- }
- }
- }
- return 0;
-}
-
-static int ab3550_registers_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_registers_print, inode->i_private);
-}
-
-static const struct file_operations ab3550_registers_fops = {
- .open = ab3550_registers_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int ab3550_bank_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
-
- seq_printf(s, "%d\n", ab->debug_bank);
- return 0;
-}
-
-static int ab3550_bank_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_bank_print, inode->i_private);
-}
-
-static ssize_t ab3550_bank_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- unsigned long user_bank;
- int err;
-
- /* Get userspace string and assure termination */
- err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
- if (err)
- return err;
-
- if (user_bank >= AB3550_NUM_BANKS) {
- dev_err(&ab->i2c_client[0]->dev,
- "debugfs error input > number of banks\n");
- return -EINVAL;
- }
-
- ab->debug_bank = user_bank;
-
- return count;
-}
-
-static int ab3550_address_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
-
- seq_printf(s, "0x%02X\n", ab->debug_address);
- return 0;
-}
-
-static int ab3550_address_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_address_print, inode->i_private);
-}
-
-static ssize_t ab3550_address_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- unsigned long user_address;
- int err;
-
- /* Get userspace string and assure termination */
- err = kstrtoul_from_user(user_buf, count, 0, &user_address);
- if (err)
- return err;
-
- if (user_address > 0xff) {
- dev_err(&ab->i2c_client[0]->dev,
- "debugfs error input > 0xff\n");
- return -EINVAL;
- }
- ab->debug_address = user_address;
- return count;
-}
-
-static int ab3550_val_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
- int err;
- u8 regvalue;
-
- err = get_register_interruptible(ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, ®value);
- if (err)
- return -EINVAL;
- seq_printf(s, "0x%02X\n", regvalue);
-
- return 0;
-}
-
-static int ab3550_val_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_val_print, inode->i_private);
-}
-
-static ssize_t ab3550_val_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- unsigned long user_val;
- int err;
- u8 regvalue;
-
- /* Get userspace string and assure termination */
- err = kstrtoul_from_user(user_buf, count, 0, &user_val);
- if (err)
- return err;
-
- if (user_val > 0xff) {
- dev_err(&ab->i2c_client[0]->dev,
- "debugfs error input > 0xff\n");
- return -EINVAL;
- }
- err = mask_and_set_register_interruptible(
- ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, 0xFF, (u8)user_val);
- if (err)
- return -EINVAL;
-
- get_register_interruptible(ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, ®value);
- if (err)
- return -EINVAL;
-
- return count;
-}
-
-static const struct file_operations ab3550_bank_fops = {
- .open = ab3550_bank_open,
- .write = ab3550_bank_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_address_fops = {
- .open = ab3550_address_open,
- .write = ab3550_address_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_val_fops = {
- .open = ab3550_val_open,
- .write = ab3550_val_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static struct dentry *ab3550_dir;
-static struct dentry *ab3550_reg_file;
-static struct dentry *ab3550_bank_file;
-static struct dentry *ab3550_address_file;
-static struct dentry *ab3550_val_file;
-
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
- ab->debug_bank = 0;
- ab->debug_address = 0x00;
-
- ab3550_dir = debugfs_create_dir(AB3550_NAME_STRING, NULL);
- if (!ab3550_dir)
- goto exit_no_debugfs;
-
- ab3550_reg_file = debugfs_create_file("all-registers",
- S_IRUGO, ab3550_dir, ab, &ab3550_registers_fops);
- if (!ab3550_reg_file)
- goto exit_destroy_dir;
-
- ab3550_bank_file = debugfs_create_file("register-bank",
- (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_bank_fops);
- if (!ab3550_bank_file)
- goto exit_destroy_reg;
-
- ab3550_address_file = debugfs_create_file("register-address",
- (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_address_fops);
- if (!ab3550_address_file)
- goto exit_destroy_bank;
-
- ab3550_val_file = debugfs_create_file("register-value",
- (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_val_fops);
- if (!ab3550_val_file)
- goto exit_destroy_address;
-
- return;
-
-exit_destroy_address:
- debugfs_remove(ab3550_address_file);
-exit_destroy_bank:
- debugfs_remove(ab3550_bank_file);
-exit_destroy_reg:
- debugfs_remove(ab3550_reg_file);
-exit_destroy_dir:
- debugfs_remove(ab3550_dir);
-exit_no_debugfs:
- dev_err(&ab->i2c_client[0]->dev, "failed to create debugfs entries.\n");
- return;
-}
-
-static inline void ab3550_remove_debugfs(void)
-{
- debugfs_remove(ab3550_val_file);
- debugfs_remove(ab3550_address_file);
- debugfs_remove(ab3550_bank_file);
- debugfs_remove(ab3550_reg_file);
- debugfs_remove(ab3550_dir);
-}
-
-#else /* !CONFIG_DEBUG_FS */
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
-}
-static inline void ab3550_remove_debugfs(void)
-{
-}
-#endif
-
-/*
- * Basic set-up, datastructure creation/destruction and I2C interface.
- * This sets up a default config in the AB3550 chip so that it
- * will work as expected.
- */
-static int __init ab3550_setup(struct ab3550 *ab)
-{
- int err = 0;
- int i;
- struct ab3550_platform_data *plf_data;
- struct abx500_init_settings *settings;
-
- plf_data = ab->i2c_client[0]->dev.platform_data;
- settings = plf_data->init_settings;
-
- for (i = 0; i < plf_data->init_settings_sz; i++) {
- err = mask_and_set_register_interruptible(ab,
- settings[i].bank,
- settings[i].reg,
- 0xFF, settings[i].setting);
- if (err)
- goto exit_no_setup;
-
- /* If event mask register update the event mask in ab3550 */
- if ((settings[i].bank == 0) &&
- (AB3550_IMR1 <= settings[i].reg) &&
- (settings[i].reg <= AB3550_IMR5)) {
- ab->event_mask[settings[i].reg - AB3550_IMR1] =
- settings[i].setting;
- }
- }
-exit_no_setup:
- return err;
-}
-
-static void ab3550_mask_work(struct work_struct *work)
-{
- struct ab3550 *ab = container_of(work, struct ab3550, mask_work);
- int i;
- unsigned long flags;
- u8 mask[AB3550_NUM_EVENT_REG];
-
- spin_lock_irqsave(&ab->event_lock, flags);
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
- mask[i] = ab->event_mask[i];
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
- int err;
-
- err = mask_and_set_register_interruptible(ab, 0,
- (AB3550_IMR1 + i), ~0, mask[i]);
- if (err)
- dev_err(&ab->i2c_client[0]->dev,
- "ab3550_mask_work failed 0x%x,0x%x\n",
- (AB3550_IMR1 + i), mask[i]);
- }
-}
-
-static void ab3550_mask(struct irq_data *data)
-{
- unsigned long flags;
- struct ab3550 *ab;
- struct ab3550_platform_data *plf_data;
- int irq;
-
- ab = irq_data_get_irq_chip_data(data);
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq = data->irq - plf_data->irq.base;
-
- spin_lock_irqsave(&ab->event_lock, flags);
- ab->event_mask[irq / 8] |= BIT(irq % 8);
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- schedule_work(&ab->mask_work);
-}
-
-static void ab3550_unmask(struct irq_data *data)
-{
- unsigned long flags;
- struct ab3550 *ab;
- struct ab3550_platform_data *plf_data;
- int irq;
-
- ab = irq_data_get_irq_chip_data(data);
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq = data->irq - plf_data->irq.base;
-
- spin_lock_irqsave(&ab->event_lock, flags);
- ab->event_mask[irq / 8] &= ~BIT(irq % 8);
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- schedule_work(&ab->mask_work);
-}
-
-static void noop(struct irq_data *data)
-{
-}
-
-static struct irq_chip ab3550_irq_chip = {
- .name = "ab3550-core", /* Keep the same name as the request */
- .irq_disable = ab3550_mask, /* No default to mask in chip.c */
- .irq_ack = noop,
- .irq_mask = ab3550_mask,
- .irq_unmask = ab3550_unmask,
-};
-
-struct ab_family_id {
- u8 id;
- char *name;
-};
-
-static const struct ab_family_id ids[] __initdata = {
- /* AB3550 */
- {
- .id = AB3550_P1A,
- .name = "P1A"
- },
- /* Terminator */
- {
- .id = 0x00,
- }
-};
-
-static int __init ab3550_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct ab3550 *ab;
- struct ab3550_platform_data *ab3550_plf_data =
- client->dev.platform_data;
- int err;
- int i;
- int num_i2c_clients = 0;
-
- ab = kzalloc(sizeof(struct ab3550), GFP_KERNEL);
- if (!ab) {
- dev_err(&client->dev,
- "could not allocate " AB3550_NAME_STRING " device\n");
- return -ENOMEM;
- }
-
- /* Initialize data structure */
- mutex_init(&ab->access_mutex);
- spin_lock_init(&ab->event_lock);
- ab->i2c_client[0] = client;
-
- i2c_set_clientdata(client, ab);
-
- /* Read chip ID register */
- err = get_register_interruptible(ab, 0, AB3550_CID_REG, &ab->chip_id);
- if (err) {
- dev_err(&client->dev, "could not communicate with the analog "
- "baseband chip\n");
- goto exit_no_detect;
- }
-
- for (i = 0; ids[i].id != 0x0; i++) {
- if (ids[i].id == ab->chip_id) {
- snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
- AB3550_ID_FORMAT_STRING, ids[i].name);
- break;
- }
- }
-
- if (ids[i].id == 0x0) {
- dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
- ab->chip_id);
- dev_err(&client->dev, "driver not started!\n");
- goto exit_no_detect;
- }
-
- dev_info(&client->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
-
- /* Attach other dummy I2C clients. */
- while (++num_i2c_clients < AB3550_NUM_BANKS) {
- ab->i2c_client[num_i2c_clients] =
- i2c_new_dummy(client->adapter,
- (client->addr + num_i2c_clients));
- if (!ab->i2c_client[num_i2c_clients]) {
- err = -ENOMEM;
- goto exit_no_dummy_client;
- }
- strlcpy(ab->i2c_client[num_i2c_clients]->name, id->name,
- sizeof(ab->i2c_client[num_i2c_clients]->name));
- }
-
- err = ab3550_setup(ab);
- if (err)
- goto exit_no_setup;
-
- INIT_WORK(&ab->mask_work, ab3550_mask_work);
-
- for (i = 0; i < ab3550_plf_data->irq.count; i++) {
- unsigned int irq;
-
- irq = ab3550_plf_data->irq.base + i;
- irq_set_chip_data(irq, ab);
- irq_set_chip_and_handler(irq, &ab3550_irq_chip,
- handle_simple_irq);
- irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- irq_set_noprobe(irq);
-#endif
- }
-
- err = request_threaded_irq(client->irq, NULL, ab3550_irq_handler,
- IRQF_ONESHOT, "ab3550-core", ab);
- /* This real unpredictable IRQ is of course sampled for entropy */
- rand_initialize_irq(client->irq);
-
- if (err)
- goto exit_no_irq;
-
- err = abx500_register_ops(&client->dev, &ab3550_ops);
- if (err)
- goto exit_no_ops;
-
- /* Set up and register the platform devices. */
- for (i = 0; i < AB3550_NUM_DEVICES; i++) {
- ab3550_devs[i].platform_data = ab3550_plf_data->dev_data[i];
- ab3550_devs[i].pdata_size = ab3550_plf_data->dev_data_sz[i];
- }
-
- err = mfd_add_devices(&client->dev, 0, ab3550_devs,
- ARRAY_SIZE(ab3550_devs), NULL,
- ab3550_plf_data->irq.base);
-
- ab3550_setup_debugfs(ab);
-
- return 0;
-
-exit_no_ops:
-exit_no_irq:
-exit_no_setup:
-exit_no_dummy_client:
- /* Unregister the dummy i2c clients. */
- while (--num_i2c_clients)
- i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-exit_no_detect:
- kfree(ab);
- return err;
-}
-
-static int __exit ab3550_remove(struct i2c_client *client)
-{
- struct ab3550 *ab = i2c_get_clientdata(client);
- int num_i2c_clients = AB3550_NUM_BANKS;
-
- mfd_remove_devices(&client->dev);
- ab3550_remove_debugfs();
-
- while (--num_i2c_clients)
- i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-
- /*
- * At this point, all subscribers should have unregistered
- * their notifiers so deactivate IRQ
- */
- free_irq(client->irq, ab);
- kfree(ab);
- return 0;
-}
-
-static const struct i2c_device_id ab3550_id[] = {
- {AB3550_NAME_STRING, 0},
- {}
-};
-MODULE_DEVICE_TABLE(i2c, ab3550_id);
-
-static struct i2c_driver ab3550_driver = {
- .driver = {
- .name = AB3550_NAME_STRING,
- .owner = THIS_MODULE,
- },
- .id_table = ab3550_id,
- .probe = ab3550_probe,
- .remove = __exit_p(ab3550_remove),
-};
-
-static int __init ab3550_i2c_init(void)
-{
- return i2c_add_driver(&ab3550_driver);
-}
-
-static void __exit ab3550_i2c_exit(void)
-{
- i2c_del_driver(&ab3550_driver);
-}
-
-subsys_initcall(ab3550_i2c_init);
-module_exit(ab3550_i2c_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB3550 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
new file mode 100644
index 0000000..4175544
--- /dev/null
+++ b/drivers/mfd/ab5500-core.c
@@ -0,0 +1,1439 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB5500 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Karl Komierowski <karl.komierowski@stericsson.com>
+ * Author: Bibek Basu <bibek.basu@stericsson.com>
+ *
+ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
+ */
+
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/version.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+#define AB5500_NUM_EVENT_REG 23
+#define AB5500_IT_LATCH0_REG 0x40
+#define AB5500_IT_MASK0_REG 0x60
+
+/*
+ * Permissible register ranges for reading and writing per device and bank.
+ *
+ * The ranges must be listed in increasing address order, and no overlaps are
+ * allowed. It is assumed that write permission implies read permission
+ * (i.e. only RO and RW permissions should be used). Ranges with write
+ * permission must not be split up.
+ */
+
+#define NO_RANGE {.count = 0, .range = NULL,}
+static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
+ [AB5500_DEVID_USB] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_USB,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8B,
+ .last = 0x8B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x91,
+ .last = 0x92,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x93,
+ .last = 0x93,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x94,
+ .last = 0x94,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xA8,
+ .last = 0xB0,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB2,
+ .last = 0xB2,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB4,
+ .last = 0xBC,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xBF,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xC5,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_ADC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_ADC,
+ .nranges = 6,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x1F,
+ .last = 0x22,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x23,
+ .last = 0x24,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x26,
+ .last = 0x2D,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x37,
+ .last = 0x57,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x58,
+ .last = 0x58,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_LEDS] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_LED,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_VIDEO] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_VDENC,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x08,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x09,
+ .last = 0x09,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0A,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x15,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x27,
+ .last = 0x2C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x41,
+ .last = 0x41,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x45,
+ .last = 0x5B,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x5D,
+ .last = 0x5D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x69,
+ .last = 0x69,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x6C,
+ .last = 0x6D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x81,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_REGULATORS] = {
+ .nbanks = 2,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x1F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x2E,
+ .last = 0x2E,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x51,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x61,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x66,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8C,
+ .last = 0x96,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xAA,
+ .last = 0xB4,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xB7,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xCA,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xD3,
+ .last = 0xE0,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_SIM] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_RTC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_RTC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x06,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_CHARGER] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_CHG,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x11,
+ .last = 0x11,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x12,
+ .last = 0x1B,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_FUELGAUGE] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_FG_BATTCOM_ACC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0C,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_VIBRATOR] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_VIBRA,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xFE,
+ .last = 0xFE,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_CODEC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x48,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xEB,
+ .last = 0xFB,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_POWER] = {
+ .nbanks = 2,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x30,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ {
+ .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+};
+
+#define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit))
+
+/* I appologize for the resource names beeing a mix of upper case
+ * and lower case but I want them to be exact as the documentation */
+static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
+ [AB5500_DEVID_LEDS] = {
+ .name = "ab5500-leds",
+ .id = AB5500_DEVID_LEDS,
+ },
+ [AB5500_DEVID_POWER] = {
+ .name = "ab5500-power",
+ .id = AB5500_DEVID_POWER,
+ },
+ [AB5500_DEVID_REGULATORS] = {
+ .name = "ab5500-regulator",
+ .id = AB5500_DEVID_REGULATORS,
+ },
+ [AB5500_DEVID_SIM] = {
+ .name = "ab5500-sim",
+ .id = AB5500_DEVID_SIM,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "SIMOFF",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(2, 0), /*rising*/
+ .end = AB5500_IRQ(2, 1), /*falling*/
+ },
+ },
+ },
+ [AB5500_DEVID_RTC] = {
+ .name = "ab5500-rtc",
+ .id = AB5500_DEVID_RTC,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "RTC_Alarm",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 7),
+ .end = AB5500_IRQ(1, 7),
+ }
+ },
+ },
+ [AB5500_DEVID_CHARGER] = {
+ .name = "ab5500-charger",
+ .id = AB5500_DEVID_CHARGER,
+ },
+ [AB5500_DEVID_ADC] = {
+ .name = "ab5500-adc",
+ .id = AB5500_DEVID_ADC,
+ .num_resources = 10,
+ .resources = (struct resource[]) {
+ {
+ .name = "TRIGGER-0",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 0),
+ .end = AB5500_IRQ(0, 0),
+ },
+ {
+ .name = "TRIGGER-1",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 1),
+ .end = AB5500_IRQ(0, 1),
+ },
+ {
+ .name = "TRIGGER-2",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 2),
+ .end = AB5500_IRQ(0, 2),
+ },
+ {
+ .name = "TRIGGER-3",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 3),
+ .end = AB5500_IRQ(0, 3),
+ },
+ {
+ .name = "TRIGGER-4",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 4),
+ .end = AB5500_IRQ(0, 4),
+ },
+ {
+ .name = "TRIGGER-5",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 5),
+ .end = AB5500_IRQ(0, 5),
+ },
+ {
+ .name = "TRIGGER-6",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 6),
+ .end = AB5500_IRQ(0, 6),
+ },
+ {
+ .name = "TRIGGER-7",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 7),
+ .end = AB5500_IRQ(0, 7),
+ },
+ {
+ .name = "TRIGGER-VBAT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 8),
+ .end = AB5500_IRQ(0, 8),
+ },
+ {
+ .name = "TRIGGER-VBAT-TXON",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 9),
+ .end = AB5500_IRQ(0, 9),
+ },
+ },
+ },
+ [AB5500_DEVID_FUELGAUGE] = {
+ .name = "ab5500-fuelgauge",
+ .id = AB5500_DEVID_FUELGAUGE,
+ .num_resources = 6,
+ .resources = (struct resource[]) {
+ {
+ .name = "Batt_attach",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 5),
+ .end = AB5500_IRQ(7, 5),
+ },
+ {
+ .name = "Batt_removal",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 6),
+ .end = AB5500_IRQ(7, 6),
+ },
+ {
+ .name = "UART_framing",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 7),
+ .end = AB5500_IRQ(7, 7),
+ },
+ {
+ .name = "UART_overrun",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 0),
+ .end = AB5500_IRQ(8, 0),
+ },
+ {
+ .name = "UART_Rdy_RX",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 1),
+ .end = AB5500_IRQ(8, 1),
+ },
+ {
+ .name = "UART_Rdy_TX",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 2),
+ .end = AB5500_IRQ(8, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_VIBRATOR] = {
+ .name = "ab5500-vibrator",
+ .id = AB5500_DEVID_VIBRATOR,
+ },
+ [AB5500_DEVID_CODEC] = {
+ .name = "ab5500-codec",
+ .id = AB5500_DEVID_CODEC,
+ .num_resources = 3,
+ .resources = (struct resource[]) {
+ {
+ .name = "audio_spkr1_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 5),
+ .end = AB5500_IRQ(9, 5),
+ },
+ {
+ .name = "audio_plllocked",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 6),
+ .end = AB5500_IRQ(9, 6),
+ },
+ {
+ .name = "audio_spkr2_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 4),
+ .end = AB5500_IRQ(17, 4),
+ },
+ },
+ },
+ [AB5500_DEVID_USB] = {
+ .name = "ab5500-usb",
+ .id = AB5500_DEVID_USB,
+ .num_resources = 36,
+ .resources = (struct resource[]) {
+ {
+ .name = "Link_Update",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(22, 1),
+ .end = AB5500_IRQ(22, 1),
+ },
+ {
+ .name = "DCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 3),
+ .end = AB5500_IRQ(8, 4),
+ },
+ {
+ .name = "VBUS_R",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 5),
+ .end = AB5500_IRQ(8, 5),
+ },
+ {
+ .name = "VBUS_F",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 6),
+ .end = AB5500_IRQ(8, 6),
+ },
+ {
+ .name = "CHGstate_10_PCVBUSchg",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 7),
+ .end = AB5500_IRQ(8, 7),
+ },
+ {
+ .name = "DCIOreverse_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 0),
+ .end = AB5500_IRQ(9, 0),
+ },
+ {
+ .name = "USBCharDetDone",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 1),
+ .end = AB5500_IRQ(9, 1),
+ },
+ {
+ .name = "DCIO_no_limit",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 2),
+ .end = AB5500_IRQ(9, 2),
+ },
+ {
+ .name = "USB_suspend",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 3),
+ .end = AB5500_IRQ(9, 3),
+ },
+ {
+ .name = "DCIOreverse_fwdcurrent",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 4),
+ .end = AB5500_IRQ(9, 4),
+ },
+ {
+ .name = "Vbus_Imeasmax_change",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 5),
+ .end = AB5500_IRQ(9, 6),
+ },
+ {
+ .name = "OVV",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 5),
+ .end = AB5500_IRQ(14, 5),
+ },
+ {
+ .name = "USBcharging_NOTok",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 3),
+ .end = AB5500_IRQ(15, 3),
+ },
+ {
+ .name = "usb_adp_sensoroff",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 6),
+ .end = AB5500_IRQ(15, 6),
+ },
+ {
+ .name = "usb_adp_probeplug",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 7),
+ .end = AB5500_IRQ(15, 7),
+ },
+ {
+ .name = "usb_adp_sinkerror",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 0),
+ .end = AB5500_IRQ(16, 6),
+ },
+ {
+ .name = "usb_adp_sourceerror",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 1),
+ .end = AB5500_IRQ(16, 1),
+ },
+ {
+ .name = "usb_idgnd_r",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 2),
+ .end = AB5500_IRQ(16, 2),
+ },
+ {
+ .name = "usb_idgnd_f",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 3),
+ .end = AB5500_IRQ(16, 3),
+ },
+ {
+ .name = "usb_iddetR1",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 4),
+ .end = AB5500_IRQ(16, 5),
+ },
+ {
+ .name = "usb_iddetR2",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 6),
+ .end = AB5500_IRQ(16, 7),
+ },
+ {
+ .name = "usb_iddetR3",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 0),
+ .end = AB5500_IRQ(17, 1),
+ },
+ {
+ .name = "usb_iddetR4",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 2),
+ .end = AB5500_IRQ(17, 3),
+ },
+ {
+ .name = "CharTempWindowOk",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 7),
+ .end = AB5500_IRQ(18, 0),
+ },
+ {
+ .name = "USB_SprDetect",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 1),
+ .end = AB5500_IRQ(18, 1),
+ },
+ {
+ .name = "usb_adp_probe_unplug",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 2),
+ .end = AB5500_IRQ(18, 2),
+ },
+ {
+ .name = "VBUSChDrop",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 3),
+ .end = AB5500_IRQ(18, 4),
+ },
+ {
+ .name = "dcio_char_rec_done",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 5),
+ .end = AB5500_IRQ(18, 5),
+ },
+ {
+ .name = "Charging_stopped_by_temp",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 6),
+ .end = AB5500_IRQ(18, 6),
+ },
+ {
+ .name = "CHGstate_11_SafeModeVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 1),
+ .end = AB5500_IRQ(21, 2),
+ },
+ {
+ .name = "CHGstate_12_comletedVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 2),
+ .end = AB5500_IRQ(21, 2),
+ },
+ {
+ .name = "CHGstate_13_completedVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 3),
+ .end = AB5500_IRQ(21, 3),
+ },
+ {
+ .name = "CHGstate_14_FullChgDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 4),
+ .end = AB5500_IRQ(21, 4),
+ },
+ {
+ .name = "CHGstate_15_SafeModeDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 5),
+ .end = AB5500_IRQ(21, 5),
+ },
+ {
+ .name = "CHGstate_16_OFFsuspendDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 6),
+ .end = AB5500_IRQ(21, 6),
+ },
+ {
+ .name = "CHGstate_17_completedDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 7),
+ .end = AB5500_IRQ(21, 7),
+ },
+ },
+ },
+ [AB5500_DEVID_OTP] = {
+ .name = "ab5500-otp",
+ .id = AB5500_DEVID_OTP,
+ },
+ [AB5500_DEVID_VIDEO] = {
+ .name = "ab5500-video",
+ .id = AB5500_DEVID_VIDEO,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "plugTVdet",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(22, 2),
+ .end = AB5500_IRQ(22, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_DBIECI] = {
+ .name = "ab5500-dbieci",
+ .id = AB5500_DEVID_DBIECI,
+ .num_resources = 10,
+ .resources = (struct resource[]) {
+ {
+ .name = "COLL",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 0),
+ .end = AB5500_IRQ(14, 0),
+ },
+ {
+ .name = "RESERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 1),
+ .end = AB5500_IRQ(14, 1),
+ },
+ {
+ .name = "FRAERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 2),
+ .end = AB5500_IRQ(14, 2),
+ },
+ {
+ .name = "COMERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 3),
+ .end = AB5500_IRQ(14, 3),
+ },
+ {
+ .name = "BSI_indicator",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 4),
+ .end = AB5500_IRQ(14, 4),
+ },
+ {
+ .name = "SPDSET",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 6),
+ .end = AB5500_IRQ(14, 6),
+ },
+ {
+ .name = "DSENT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 7),
+ .end = AB5500_IRQ(14, 7),
+ },
+ {
+ .name = "DREC",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 0),
+ .end = AB5500_IRQ(15, 0),
+ },
+ {
+ .name = "ACCINT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 1),
+ .end = AB5500_IRQ(15, 1),
+ },
+ {
+ .name = "NOPINT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 2),
+ .end = AB5500_IRQ(15, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_ONSWA] = {
+ .name = "ab5500-onswa",
+ .id = AB5500_DEVID_ONSWA,
+ .num_resources = 2,
+ .resources = (struct resource[]) {
+ {
+ .name = "ONSWAn_rising",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 3),
+ .end = AB5500_IRQ(1, 3),
+ },
+ {
+ .name = "ONSWAn_falling",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 4),
+ .end = AB5500_IRQ(1, 4),
+ },
+ },
+ },
+};
+
+/*
+ * Functionality for getting/setting register values.
+ */
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
+ u8 bank, u8 reg,
+ u8 *value)
+{
+ int err;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
+
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ int err;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ while (numregs) {
+ /* The hardware limit for get page is 4 */
+ u8 curnum = min_t(u8, numregs, 4u);
+
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+ first_reg, regvals, curnum);
+ if (err)
+ goto out;
+
+ numregs -= curnum;
+ first_reg += curnum;
+ regvals += curnum;
+ }
+
+out:
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ int err = 0;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ if (bitmask) {
+ u8 buf;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ if (bitmask == 0xFF) /* No need to read in this case. */
+ buf = bitvalues;
+ else { /* Read and modify the register value. */
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+ reg, &buf, 1);
+ if (err)
+ return err;
+
+ buf = ((~bitmask & buf) | (bitmask & bitvalues));
+ }
+ /* Write the new value. */
+ err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
+ &buf, 1);
+
+ mutex_unlock(&ab->access_mutex);
+ }
+ return err;
+}
+
+static int
+set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
+{
+ return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+ 0xff, value);
+}
+
+/*
+ * Read/write permission checking functions.
+ */
+static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
+{
+ u8 i;
+
+ if (devid < AB5500_NUM_DEVICES) {
+ for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
+ if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
+ return &ab5500_bank_ranges[devid].bank[i];
+ }
+ }
+ return NULL;
+}
+
+static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+ u8 i; /* range loop index */
+ const struct ab5500_i2c_ranges *bankref;
+
+ bankref = get_bankref(devid, bank);
+ if (bankref == NULL || last_reg < first_reg)
+ return false;
+
+ for (i = 0; i < bankref->nranges; i++) {
+ if (first_reg < bankref->range[i].first)
+ break;
+ if ((last_reg <= bankref->range[i].last) &&
+ (bankref->range[i].perm & AB5500_PERM_WR))
+ return true;
+ }
+ return false;
+}
+
+static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
+{
+ return page_write_allowed(devid, bank, reg, reg);
+}
+
+static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+ u8 i;
+ const struct ab5500_i2c_ranges *bankref;
+
+ bankref = get_bankref(devid, bank);
+ if (bankref == NULL || last_reg < first_reg)
+ return false;
+
+
+ /* Find the range (if it exists in the list) that includes first_reg. */
+ for (i = 0; i < bankref->nranges; i++) {
+ if (first_reg < bankref->range[i].first)
+ return false;
+ if (first_reg <= bankref->range[i].last)
+ break;
+ }
+ /* Make sure that the entire range up to and including last_reg is
+ * readable. This may span several of the ranges in the list.
+ */
+ while ((i < bankref->nranges) &&
+ (bankref->range[i].perm & AB5500_PERM_RD)) {
+ if (last_reg <= bankref->range[i].last)
+ return true;
+ if ((++i >= bankref->nranges) ||
+ (bankref->range[i].first !=
+ (bankref->range[i - 1].last + 1))) {
+ break;
+ }
+ }
+ return false;
+}
+
+static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
+{
+ return page_read_allowed(devid, bank, reg, reg);
+}
+
+
+/*
+ * The exported register access functionality.
+ */
+static int ab5500_get_chip_id(struct device *dev)
+{
+ struct ab5500 *ab = dev_get_drvdata(dev->parent);
+
+ return (int)ab->chip_id;
+}
+
+static int ab5500_mask_and_set_register_interruptible(struct device *dev,
+ u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !reg_write_allowed(pdev->id, bank, reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+ bitmask, bitvalues);
+}
+
+static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 value)
+{
+ return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
+ value);
+}
+
+static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 *value)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !reg_read_allowed(pdev->id, bank, reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return ab5500_get_register_interruptible_raw(ab, bank, reg, value);
+}
+
+static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !page_read_allowed(pdev->id, bank,
+ first_reg, (first_reg + numregs - 1)))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return get_register_page_interruptible(ab, bank, first_reg, regvals,
+ numregs);
+}
+
+static int
+ab5500_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+ struct ab5500 *ab;
+
+ ab = dev_get_drvdata(dev->parent);
+ if (!ab->startup_events_read)
+ return -EAGAIN; /* Try again later */
+
+ memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG);
+ return 0;
+}
+
+static struct abx500_ops ab5500_ops = {
+ .get_chip_id = ab5500_get_chip_id,
+ .get_register = ab5500_get_register_interruptible,
+ .set_register = ab5500_set_register_interruptible,
+ .get_register_page = ab5500_get_register_page_interruptible,
+ .set_register_page = NULL,
+ .mask_and_set_register = ab5500_mask_and_set_register_interruptible,
+ .event_registers_startup_state_get =
+ ab5500_event_registers_startup_state_get,
+ .startup_irq_enabled = NULL,
+};
+
+/*
+ * ab5500_setup : Basic set-up, datastructure creation/destruction
+ * and I2C interface.This sets up a default config
+ * in the AB5500 chip so that it will work as expected.
+ * @ab : Pointer to ab5500 structure
+ * @settings : Pointer to struct abx500_init_settings
+ * @size : Size of init data
+ */
+static int __init ab5500_setup(struct ab5500 *ab,
+ struct abx500_init_settings *settings, unsigned int size)
+{
+ int err = 0;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ err = ab5500_mask_and_set_register_interruptible_raw(ab,
+ settings[i].bank,
+ settings[i].reg,
+ 0xFF, settings[i].setting);
+ if (err)
+ goto exit_no_setup;
+
+ /* If event mask register update the event mask in ab5500 */
+ if ((settings[i].bank == AB5500_BANK_IT) &&
+ (AB5500_MASK_BASE <= settings[i].reg) &&
+ (settings[i].reg <= AB5500_MASK_END)) {
+ ab->mask[settings[i].reg - AB5500_MASK_BASE] =
+ settings[i].setting;
+ }
+ }
+exit_no_setup:
+ return err;
+}
+
+struct ab_family_id {
+ u8 id;
+ char *name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+ /* AB5500 */
+ {
+ .id = AB5500_1_0,
+ .name = "1.0"
+ },
+ {
+ .id = AB5500_1_1,
+ .name = "1.1"
+ },
+ /* Terminator */
+ {
+ .id = 0x00,
+ }
+};
+
+static int __init ab5500_probe(struct platform_device *pdev)
+{
+ struct ab5500 *ab;
+ struct ab5500_platform_data *ab5500_plf_data =
+ pdev->dev.platform_data;
+ int err;
+ int i;
+
+ ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL);
+ if (!ab) {
+ dev_err(&pdev->dev,
+ "could not allocate ab5500 device\n");
+ return -ENOMEM;
+ }
+
+ /* Initialize data structure */
+ mutex_init(&ab->access_mutex);
+ mutex_init(&ab->irq_lock);
+ ab->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, ab);
+
+ /* Read chip ID register */
+ err = ab5500_get_register_interruptible_raw(ab,
+ AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ AB5500_CHIP_ID, &ab->chip_id);
+ if (err) {
+ dev_err(&pdev->dev, "could not communicate with the analog "
+ "baseband chip\n");
+ goto exit_no_detect;
+ }
+
+ for (i = 0; ids[i].id != 0x0; i++) {
+ if (ids[i].id == ab->chip_id) {
+ snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
+ "AB5500 %s", ids[i].name);
+ break;
+ }
+ }
+ if (ids[i].id == 0x0) {
+ dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n",
+ ab->chip_id);
+ dev_err(&pdev->dev, "driver not started!\n");
+ goto exit_no_detect;
+ }
+
+ /* Clear and mask all interrupts */
+ for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) {
+ u8 latchreg = AB5500_IT_LATCH0_REG + i;
+ u8 maskreg = AB5500_IT_MASK0_REG + i;
+ u8 val;
+
+ ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT,
+ latchreg, &val);
+ set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff);
+ ab->mask[i] = ab->oldmask[i] = 0xff;
+ }
+
+ err = abx500_register_ops(&pdev->dev, &ab5500_ops);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_register ops error\n");
+ goto exit_no_detect;
+ }
+
+ /* Set up and register the platform devices. */
+ for (i = 0; i < AB5500_NUM_DEVICES; i++) {
+ ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i];
+ ab5500_devs[i].pdata_size =
+ sizeof(ab5500_plf_data->dev_data[i]);
+ }
+
+ err = mfd_add_devices(&pdev->dev, 0, ab5500_devs,
+ ARRAY_SIZE(ab5500_devs), NULL,
+ ab5500_plf_data->irq.base);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_mfd_add_device error\n");
+ goto exit_no_detect;
+ }
+
+ err = ab5500_setup(ab, ab5500_plf_data->init_settings,
+ ab5500_plf_data->init_settings_sz);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_setup error\n");
+ goto exit_no_detect;
+ }
+
+ ab5500_setup_debugfs(ab);
+
+ dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
+ return 0;
+
+exit_no_detect:
+ kfree(ab);
+ return err;
+}
+
+static int __exit ab5500_remove(struct platform_device *pdev)
+{
+ struct ab5500 *ab = platform_get_drvdata(pdev);
+
+ ab5500_remove_debugfs();
+ mfd_remove_devices(&pdev->dev);
+ kfree(ab);
+ return 0;
+}
+
+static struct platform_driver ab5500_driver = {
+ .driver = {
+ .name = "ab5500-core",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(ab5500_remove),
+};
+
+static int __init ab5500_core_init(void)
+{
+ return platform_driver_probe(&ab5500_driver, ab5500_probe);
+}
+
+static void __exit ab5500_core_exit(void)
+{
+ platform_driver_unregister(&ab5500_driver);
+}
+
+subsys_initcall(ab5500_core_init);
+module_exit(ab5500_core_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB5500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h
new file mode 100644
index 0000000..63b30b1
--- /dev/null
+++ b/drivers/mfd/ab5500-core.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Shared definitions and data structures for the AB5500 MFD driver
+ */
+
+/* Read/write operation values. */
+#define AB5500_PERM_RD (0x01)
+#define AB5500_PERM_WR (0x02)
+
+/* Read/write permissions. */
+#define AB5500_PERM_RO (AB5500_PERM_RD)
+#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
+
+#define AB5500_MASK_BASE (0x60)
+#define AB5500_MASK_END (0x79)
+#define AB5500_CHIP_ID (0x20)
+
+/**
+ * struct ab5500_reg_range
+ * @first: the first address of the range
+ * @last: the last address of the range
+ * @perm: access permissions for the range
+ */
+struct ab5500_reg_range {
+ u8 first;
+ u8 last;
+ u8 perm;
+};
+
+/**
+ * struct ab5500_i2c_ranges
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_ranges {
+ u8 nranges;
+ u8 bankid;
+ const struct ab5500_reg_range *range;
+};
+
+/**
+ * struct ab5500_i2c_banks
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_banks {
+ u8 nbanks;
+ const struct ab5500_i2c_ranges *bank;
+};
+
+/**
+ * struct ab5500_bank
+ * @slave_addr: I2C slave_addr found in AB5500 specification
+ * @name: Documentation name of the bank. For reference
+ */
+struct ab5500_bank {
+ u8 slave_addr;
+ const char *name;
+};
+
+static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
+ [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+ AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
+ [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+ AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
+ [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
+ [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
+ [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
+ [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
+ [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
+ [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
+ [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
+ [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
+ [AB5500_BANK_FG_BATTCOM_ACC] = {
+ AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
+ [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
+ [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
+ [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
+ [AB5500_BANK_AUDIO_HEADSETUSB] = {
+ AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
+};
+
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
+ u8 *value);
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues);
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
new file mode 100644
index 0000000..6be1fe6
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.c
@@ -0,0 +1,806 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs support for the AB5500 MFD driver
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/uaccess.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = {
+ [AB5500_BANK_LED] = {
+ .bankid = AB5500_BANK_LED,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_ADC] = {
+ .bankid = AB5500_BANK_ADC,
+ .nranges = 6,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x1F,
+ .last = 0x22,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x23,
+ .last = 0x24,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x26,
+ .last = 0x2D,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x37,
+ .last = 0x57,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x58,
+ .last = 0x58,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_RTC] = {
+ .bankid = AB5500_BANK_RTC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x06,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_STARTUP] = {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x1F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x2E,
+ .last = 0x2E,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x51,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x61,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x66,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8C,
+ .last = 0x96,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xAA,
+ .last = 0xB4,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xB7,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xCA,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xD3,
+ .last = 0xE0,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_DBI_ECI] = {
+ .bankid = AB5500_BANK_DBI_ECI,
+ .nranges = 3,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x07,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x10,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x13,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_CHG] = {
+ .bankid = AB5500_BANK_CHG,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x11,
+ .last = 0x11,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x12,
+ .last = 0x1B,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_FG_BATTCOM_ACC] = {
+ .bankid = AB5500_BANK_FG_BATTCOM_ACC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0C,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_USB] = {
+ .bankid = AB5500_BANK_USB,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8B,
+ .last = 0x8B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x91,
+ .last = 0x92,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x93,
+ .last = 0x93,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x94,
+ .last = 0x94,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xA8,
+ .last = 0xB0,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB2,
+ .last = 0xB2,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB4,
+ .last = 0xBC,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xBF,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xC5,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_IT] = {
+ .bankid = AB5500_BANK_IT,
+ .nranges = 4,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x02,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x20,
+ .last = 0x36,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x40,
+ .last = 0x56,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x60,
+ .last = 0x76,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+ .bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST,
+ .nranges = 7,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x02,
+ .last = 0x02,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x12,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x30,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x40,
+ .last = 0x44,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x54,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x64,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x70,
+ .last = 0x74,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+ .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ .nranges = 13,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x02,
+ .last = 0x02,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0D,
+ .last = 0x0F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1C,
+ .last = 0x1C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1E,
+ .last = 0x1E,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x20,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x25,
+ .last = 0x25,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x28,
+ .last = 0x2A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x30,
+ .last = 0x33,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x40,
+ .last = 0x43,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x53,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x63,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x70,
+ .last = 0x73,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VIBRA] = {
+ .bankid = AB5500_BANK_VIBRA,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xFE,
+ .last = 0xFE,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_AUDIO_HEADSETUSB] = {
+ .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x48,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xEB,
+ .last = 0xFB,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_SIM_USBSIM] = {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VDENC] = {
+ .bankid = AB5500_BANK_VDENC,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x08,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x09,
+ .last = 0x09,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0A,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x15,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x27,
+ .last = 0x2C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x41,
+ .last = 0x41,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x45,
+ .last = 0x5B,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x5D,
+ .last = 0x5D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x69,
+ .last = 0x69,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x6C,
+ .last = 0x6D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x81,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+};
+
+static int ab5500_registers_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+ unsigned int i;
+ u8 bank = (u8)ab->debug_bank;
+
+ seq_printf(s, "ab5500 register values:\n");
+ for (bank = 0; bank < AB5500_NUM_BANKS; bank++) {
+ seq_printf(s, " bank %u, %s (0x%x):\n", bank,
+ bankinfo[bank].name,
+ bankinfo[bank].slave_addr);
+ for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) {
+ u8 reg;
+ int err;
+
+ for (reg = ab5500_reg_ranges[bank].range[i].first;
+ reg <= ab5500_reg_ranges[bank].range[i].last;
+ reg++) {
+ u8 value;
+
+ err = ab5500_get_register_interruptible_raw(ab,
+ bank, reg,
+ &value);
+ if (err < 0) {
+ dev_err(ab->dev, "get_reg failed %d"
+ "bank 0x%x reg 0x%x\n",
+ err, bank, reg);
+ return err;
+ }
+
+ err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n",
+ bank, reg, value);
+ if (err < 0) {
+ dev_err(ab->dev,
+ "seq_printf overflow\n");
+ /*
+ * Error is not returned here since
+ * the output is wanted in any case
+ */
+ return 0;
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+static int ab5500_registers_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab5500_registers_fops = {
+ .open = ab5500_registers_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab5500_bank_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+
+ seq_printf(s, "%d\n", ab->debug_bank);
+ return 0;
+}
+
+static int ab5500_bank_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_bank_print, inode->i_private);
+}
+
+static ssize_t ab5500_bank_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_bank;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_bank);
+ if (err)
+ return -EINVAL;
+
+ if (user_bank >= AB5500_NUM_BANKS) {
+ dev_err(ab->dev,
+ "debugfs error input > number of banks\n");
+ return -EINVAL;
+ }
+
+ ab->debug_bank = user_bank;
+
+ return buf_size;
+}
+
+static int ab5500_address_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+
+ seq_printf(s, "0x%02X\n", ab->debug_address);
+ return 0;
+}
+
+static int ab5500_address_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_address_print, inode->i_private);
+}
+
+static ssize_t ab5500_address_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_address;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_address);
+ if (err)
+ return -EINVAL;
+ if (user_address > 0xff) {
+ dev_err(ab->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ ab->debug_address = user_address;
+ return buf_size;
+}
+
+static int ab5500_val_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+ int err;
+ u8 regvalue;
+
+ err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, ®value);
+ if (err) {
+ dev_err(ab->dev, "get_reg failed %d, bank 0x%x"
+ ", reg 0x%x\n", err, ab->debug_bank,
+ ab->debug_address);
+ return -EINVAL;
+ }
+ seq_printf(s, "0x%02X\n", regvalue);
+
+ return 0;
+}
+
+static int ab5500_val_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_val_print, inode->i_private);
+}
+
+static ssize_t ab5500_val_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_val;
+ int err;
+ u8 regvalue;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_val);
+ if (err)
+ return -EINVAL;
+ if (user_val > 0xff) {
+ dev_err(ab->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ err = ab5500_mask_and_set_register_interruptible_raw(
+ ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, 0xFF, (u8)user_val);
+ if (err)
+ return -EINVAL;
+
+ ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, ®value);
+ if (err)
+ return -EINVAL;
+
+ return buf_size;
+}
+
+static const struct file_operations ab5500_bank_fops = {
+ .open = ab5500_bank_open,
+ .write = ab5500_bank_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_address_fops = {
+ .open = ab5500_address_open,
+ .write = ab5500_address_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_val_fops = {
+ .open = ab5500_val_open,
+ .write = ab5500_val_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static struct dentry *ab5500_dir;
+static struct dentry *ab5500_reg_file;
+static struct dentry *ab5500_bank_file;
+static struct dentry *ab5500_address_file;
+static struct dentry *ab5500_val_file;
+
+void __init ab5500_setup_debugfs(struct ab5500 *ab)
+{
+ ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP;
+ ab->debug_address = AB5500_CHIP_ID;
+
+ ab5500_dir = debugfs_create_dir("ab5500", NULL);
+ if (!ab5500_dir)
+ goto exit_no_debugfs;
+
+ ab5500_reg_file = debugfs_create_file("all-bank-registers",
+ S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops);
+ if (!ab5500_reg_file)
+ goto exit_destroy_dir;
+
+ ab5500_bank_file = debugfs_create_file("register-bank",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops);
+ if (!ab5500_bank_file)
+ goto exit_destroy_reg;
+
+ ab5500_address_file = debugfs_create_file("register-address",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops);
+ if (!ab5500_address_file)
+ goto exit_destroy_bank;
+
+ ab5500_val_file = debugfs_create_file("register-value",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops);
+ if (!ab5500_val_file)
+ goto exit_destroy_address;
+
+ return;
+
+exit_destroy_address:
+ debugfs_remove(ab5500_address_file);
+exit_destroy_bank:
+ debugfs_remove(ab5500_bank_file);
+exit_destroy_reg:
+ debugfs_remove(ab5500_reg_file);
+exit_destroy_dir:
+ debugfs_remove(ab5500_dir);
+exit_no_debugfs:
+ dev_err(ab->dev, "failed to create debugfs entries.\n");
+ return;
+}
+
+void __exit ab5500_remove_debugfs(void)
+{
+ debugfs_remove(ab5500_val_file);
+ debugfs_remove(ab5500_address_file);
+ debugfs_remove(ab5500_bank_file);
+ debugfs_remove(ab5500_reg_file);
+ debugfs_remove(ab5500_dir);
+}
diff --git a/drivers/mfd/ab5500-debugfs.h b/drivers/mfd/ab5500-debugfs.h
new file mode 100644
index 0000000..7330a9b
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs interface to the AB5500 core driver
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+void ab5500_setup_debugfs(struct ab5500 *ab);
+void ab5500_remove_debugfs(void);
+
+#else /* !CONFIG_DEBUG_FS */
+
+static inline void ab5500_setup_debugfs(struct ab5500 *ab)
+{
+}
+
+static inline void ab5500_remove_debugfs(void)
+{
+}
+
+#endif
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 387705e..1e91738 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -92,6 +92,8 @@
#define AB8500_REV_REG 0x80
#define AB8500_SWITCH_OFF_STATUS 0x00
+#define AB8500_TURN_ON_STATUS 0x00
+
/*
* Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
* numbers are indexed into this array with (num / 8).
@@ -293,6 +295,7 @@
.irq_bus_lock = ab8500_irq_lock,
.irq_bus_sync_unlock = ab8500_irq_sync_unlock,
.irq_mask = ab8500_irq_mask,
+ .irq_disable = ab8500_irq_mask,
.irq_unmask = ab8500_irq_unmask,
};
@@ -811,12 +814,40 @@
return sprintf(buf, "%#x\n", value);
}
+/*
+ * ab8500 has turned on due to (TURN_ON_STATUS):
+ * 0x01 PORnVbat
+ * 0x02 PonKey1dbF
+ * 0x04 PonKey2dbF
+ * 0x08 RTCAlarm
+ * 0x10 MainChDet
+ * 0x20 VbusDet
+ * 0x40 UsbIDDetect
+ * 0x80 Reserved
+ */
+static ssize_t show_turn_on_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ u8 value;
+ struct ab8500 *ab8500;
+
+ ab8500 = dev_get_drvdata(dev);
+ ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_TURN_ON_STATUS, &value);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%#x\n", value);
+}
+
static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
+static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
static struct attribute *ab8500_sysfs_entries[] = {
&dev_attr_chip_id.attr,
&dev_attr_switch_off_status.attr,
+ &dev_attr_turn_on_status.attr,
NULL,
};
@@ -843,11 +874,11 @@
return ret;
switch (value) {
- case AB8500_CUTEARLY:
case AB8500_CUT1P0:
case AB8500_CUT1P1:
case AB8500_CUT2P0:
case AB8500_CUT3P0:
+ case AB8500_CUT3P3:
dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
break;
default:
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index f16afb2..e985d17 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -143,12 +143,15 @@
}
EXPORT_SYMBOL(ab8500_gpadc_get);
-static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 input,
+/**
+ * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
+ */
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
int ad_value)
{
int res;
- switch (input) {
+ switch (channel) {
case MAIN_CHARGER_V:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
@@ -232,18 +235,46 @@
}
return res;
}
+EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
/**
* ab8500_gpadc_convert() - gpadc conversion
- * @input: analog input to be converted to digital data
+ * @channel: analog channel to be converted to digital data
*
* This function converts the selected analog i/p to digital
* data.
*/
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+ int ad_value;
+ int voltage;
+
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel);
+ if (ad_value < 0) {
+ dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+ return ad_value;
+ }
+
+ voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
+
+ if (voltage < 0)
+ dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+ " %d AD: 0x%x\n", channel, ad_value);
+
+ return voltage;
+}
+EXPORT_SYMBOL(ab8500_gpadc_convert);
+
+/**
+ * ab8500_gpadc_read_raw() - gpadc read
+ * @channel: analog channel to be read
+ *
+ * This function obtains the raw ADC value, this then needs
+ * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ */
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
{
int ret;
- u16 data = 0;
int looplimit = 0;
u8 val, low_data, high_data;
@@ -278,9 +309,9 @@
goto out;
}
- /* Select the input source and set average samples to 16 */
+ /* Select the channel source and set average samples to 16 */
ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_CTRL2_REG, (input | SW_AVG_16));
+ AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: set avg samples failed\n");
@@ -292,7 +323,7 @@
* charging current sense if it needed, ABB 3.0 needs some special
* treatment too.
*/
- switch (input) {
+ switch (channel) {
case MAIN_CHARGER_C:
case USB_CHARGER_C:
ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
@@ -359,7 +390,6 @@
goto out;
}
- data = (high_data << 8) | low_data;
/* Disable GPADC */
ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
@@ -370,8 +400,8 @@
/* Disable VTVout LDO this is required for GPADC */
regulator_disable(gpadc->regu);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
- ret = ab8500_gpadc_ad_to_voltage(gpadc, input, data);
- return ret;
+
+ return (high_data << 8) | low_data;
out:
/*
@@ -385,10 +415,10 @@
regulator_disable(gpadc->regu);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
dev_err(gpadc->dev,
- "gpadc_conversion: Failed to AD convert channel %d\n", input);
+ "gpadc_conversion: Failed to AD convert channel %d\n", channel);
return ret;
}
-EXPORT_SYMBOL(ab8500_gpadc_convert);
+EXPORT_SYMBOL(ab8500_gpadc_read_raw);
/**
* ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index c71ae09..3bd85bd 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -584,7 +584,7 @@
return gpiochip_remove(&asic->gpio);
}
-static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
+static void asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
{
unsigned long flags;
u32 cdex;
@@ -596,8 +596,6 @@
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
}
spin_unlock_irqrestore(&asic->lock, flags);
-
- return 0;
}
static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
@@ -779,6 +777,8 @@
.name = "tmio-mmc",
.enable = asic3_mmc_enable,
.disable = asic3_mmc_disable,
+ .suspend = asic3_mmc_disable,
+ .resume = asic3_mmc_enable,
.platform_data = &asic3_mmc_data,
.pdata_size = sizeof(asic3_mmc_data),
.num_resources = ARRAY_SIZE(asic3_mmc_resources),
@@ -811,24 +811,43 @@
return 0;
}
+static int asic3_leds_suspend(struct platform_device *pdev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
+ msleep(1);
+
+ asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
+
+ return 0;
+}
+
static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = {
[0] = {
.name = "leds-asic3",
.id = 0,
.enable = asic3_leds_enable,
.disable = asic3_leds_disable,
+ .suspend = asic3_leds_suspend,
+ .resume = asic3_leds_enable,
},
[1] = {
.name = "leds-asic3",
.id = 1,
.enable = asic3_leds_enable,
.disable = asic3_leds_disable,
+ .suspend = asic3_leds_suspend,
+ .resume = asic3_leds_enable,
},
[2] = {
.name = "leds-asic3",
.id = 2,
.enable = asic3_leds_enable,
.disable = asic3_leds_disable,
+ .suspend = asic3_leds_suspend,
+ .resume = asic3_leds_enable,
},
};
@@ -949,6 +968,7 @@
goto out_unmap;
}
+ asic->gpio.label = "asic3";
asic->gpio.base = pdata->gpio_base;
asic->gpio.ngpio = ASIC3_NUM_GPIOS;
asic->gpio.get = asic3_gpio_get;
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 2fadbae..1b79c37 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -523,7 +523,7 @@
chip->ops->read_events(chip, &tmp);
ret = request_irq(client->irq, da903x_irq_handler,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING,
"da903x", chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
diff --git a/drivers/mfd/db5500-prcmu-regs.h b/drivers/mfd/db5500-prcmu-regs.h
deleted file mode 100644
index 9a8e9e4..0000000
--- a/drivers/mfd/db5500-prcmu-regs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-
-#ifndef __MACH_PRCMU_REGS_H
-#define __MACH_PRCMU_REGS_H
-
-#include <mach/hardware.h>
-
-#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118)
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f
-#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xf
-
-#define PRCM_PLLARM_LOCKP (_PRCMU_BASE + 0x0a8)
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
-
-#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1
-
-#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON 0x100
-
-#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0)
-#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308)
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130)
-#define PRCM_IOCR (_PRCMU_BASE + 0x310)
-#define PRCM_IOCR_IOFORCE 0x1
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104)
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328)
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1
-
-#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334)
-#define ARM_WAKEUP_MODEM 0x1
-
-#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174)
-
-#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018)
-
-/* System reset register */
-#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504)
-#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
-#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044)
-#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064)
-#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058)
-#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c)
-#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C)
-#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
-#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8)
-#define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304)
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254)
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324)
-#define PRCM_GPIOCR (_PRCMU_BASE + 0x138)
-#define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800
-#define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1
-
-
-#endif /* __MACH_PRCMU__REGS_H */
diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c
index 9dbb3ca..bb115b2 100644
--- a/drivers/mfd/db5500-prcmu.c
+++ b/drivers/mfd/db5500-prcmu.c
@@ -20,11 +20,11 @@
#include <linux/jiffies.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
-#include <linux/mfd/db5500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/db5500-regs.h>
-#include "db5500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
#define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
@@ -109,15 +109,18 @@
#define PRCMU_DSI_CLOCK_SETTING 0x00000128
/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135
-#define PRCMU_PLLDSI_FREQ_SETTING 0x0004013C
+#define PRCMU_PLLDSI_FREQ_SETTING 0x00020121
#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002
-#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000101
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000201
#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101
#define PRCMU_ENABLE_PLLDSI 0x00000001
#define PRCMU_DISABLE_PLLDSI 0x00000000
#define PRCMU_DSI_RESET_SW 0x00000003
+#define PRCMU_RESOUTN0_PIN 0x00000001
+#define PRCMU_RESOUTN1_PIN 0x00000002
+#define PRCMU_RESOUTN2_PIN 0x00000004
#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
@@ -315,31 +318,31 @@
r = false;
break;
}
- writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
return r;
}
static bool read_mailbox_1(void)
{
- writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_2(void)
{
- writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_3(void)
{
- writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_4(void)
{
- writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
return false;
}
@@ -360,19 +363,19 @@
print_unknown_header_warning(5, header);
break;
}
- writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_6(void)
{
- writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_7(void)
{
- writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
return false;
}
@@ -434,7 +437,7 @@
return -ENODEV;
/* Clean up the mailbox interrupts after pre-kernel code. */
- writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLEAR);
+ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
prcmu_irq_thread_fn, 0, "prcmu", NULL);
diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
deleted file mode 100644
index 3bbf04d..0000000
--- a/drivers/mfd/db8500-prcmu-regs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-#ifndef __DB8500_PRCMU_REGS_H
-#define __DB8500_PRCMU_REGS_H
-
-#include <linux/bitops.h>
-#include <mach/hardware.h>
-
-#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
-
-#define PRCM_ARM_PLLDIVPS 0x118
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE BITS(0, 5)
-#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xF
-
-#define PRCM_PLLARM_LOCKP 0x0A8
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
-
-#define PRCM_ARM_CHGCLKREQ 0x114
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
-
-#define PRCM_PLLARM_ENABLE 0x98
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE BIT(0)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON BIT(8)
-
-#define PRCM_ARMCLKFIX_MGT 0x0
-#define PRCM_A9_RESETN_CLR 0x1f4
-#define PRCM_A9_RESETN_SET 0x1f0
-#define PRCM_ARM_LS_CLAMP 0x30C
-#define PRCM_SRAM_A9 0x308
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY 0x130
-#define PRCM_IOCR 0x310
-#define PRCM_IOCR_IOFORCE BIT(0)
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL 0x0FC
-#define PRCM_MBOX_CPU_SET 0x100
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ 0x328
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
-
-#define PRCM_A9_MASK_ACK 0x32C
-#define PRCM_ARMITMSK31TO0 0x11C
-#define PRCM_ARMITMSK63TO32 0x120
-#define PRCM_ARMITMSK95TO64 0x124
-#define PRCM_ARMITMSK127TO96 0x128
-#define PRCM_POWER_STATE_VAL 0x25C
-#define PRCM_ARMITVAL31TO0 0x260
-#define PRCM_ARMITVAL63TO32 0x264
-#define PRCM_ARMITVAL95TO64 0x268
-#define PRCM_ARMITVAL127TO96 0x26C
-
-#define PRCM_HOSTACCESS_REQ 0x334
-#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
-
-#define PRCM_ARM_IT1_CLR 0x48C
-#define PRCM_ARM_IT1_VAL 0x494
-
-#define PRCM_ITSTATUS0 0x148
-#define PRCM_ITSTATUS1 0x150
-#define PRCM_ITSTATUS2 0x158
-#define PRCM_ITSTATUS3 0x160
-#define PRCM_ITSTATUS4 0x168
-#define PRCM_ITSTATUS5 0x484
-#define PRCM_ITCLEAR5 0x488
-#define PRCM_ARMIT_MASKXP70_IT 0x1018
-
-/* System reset register */
-#define PRCM_APE_SOFTRST 0x228
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET 0x420
-#define PRCM_MMIP_LS_CLAMP_CLR 0x424
-
-/* PRCMU HW semaphore */
-#define PRCM_SEM 0x400
-#define PRCM_SEM_PRCM_SEM BIT(0)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ 0x500
-#define PRCM_PLLDSI_ENABLE 0x504
-#define PRCM_PLLDSI_LOCKP 0x508
-#define PRCM_DSI_PLLOUT_SEL 0x530
-#define PRCM_DSITVCLK_DIV 0x52C
-#define PRCM_APE_RESETN_SET 0x1E4
-#define PRCM_APE_RESETN_CLR 0x1E8
-
-#define PRCM_TCR 0x1C8
-#define PRCM_TCR_TENSEL_MASK BITS(0, 7)
-#define PRCM_TCR_STOP_TIMERS BIT(16)
-#define PRCM_TCR_DOZE_MODE BIT(17)
-
-#define PRCM_CLKOCR 0x1CC
-#define PRCM_CLKOCR_CLKODIV0_SHIFT 0
-#define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5)
-#define PRCM_CLKOCR_CLKOSEL0_SHIFT 6
-#define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8)
-#define PRCM_CLKOCR_CLKODIV1_SHIFT 16
-#define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21)
-#define PRCM_CLKOCR_CLKOSEL1_SHIFT 22
-#define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24)
-#define PRCM_CLKOCR_CLK1TYPE BIT(28)
-
-#define PRCM_SGACLK_MGT 0x014
-#define PRCM_UARTCLK_MGT 0x018
-#define PRCM_MSP02CLK_MGT 0x01C
-#define PRCM_MSP1CLK_MGT 0x288
-#define PRCM_I2CCLK_MGT 0x020
-#define PRCM_SDMMCCLK_MGT 0x024
-#define PRCM_SLIMCLK_MGT 0x028
-#define PRCM_PER1CLK_MGT 0x02C
-#define PRCM_PER2CLK_MGT 0x030
-#define PRCM_PER3CLK_MGT 0x034
-#define PRCM_PER5CLK_MGT 0x038
-#define PRCM_PER6CLK_MGT 0x03C
-#define PRCM_PER7CLK_MGT 0x040
-#define PRCM_LCDCLK_MGT 0x044
-#define PRCM_BMLCLK_MGT 0x04C
-#define PRCM_HSITXCLK_MGT 0x050
-#define PRCM_HSIRXCLK_MGT 0x054
-#define PRCM_HDMICLK_MGT 0x058
-#define PRCM_APEATCLK_MGT 0x05C
-#define PRCM_APETRACECLK_MGT 0x060
-#define PRCM_MCDECLK_MGT 0x064
-#define PRCM_IPI2CCLK_MGT 0x068
-#define PRCM_DSIALTCLK_MGT 0x06C
-#define PRCM_DMACLK_MGT 0x074
-#define PRCM_B2R2CLK_MGT 0x078
-#define PRCM_TVCLK_MGT 0x07C
-#define PRCM_UNIPROCLK_MGT 0x278
-#define PRCM_SSPCLK_MGT 0x280
-#define PRCM_RNGCLK_MGT 0x284
-#define PRCM_UICCCLK_MGT 0x27C
-
-#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4)
-#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7)
-#define PRCM_CLK_MGT_CLKEN BIT(8)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET 0x410
-#define PRCM_SRAM_LS_SLEEP 0x304
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET 0x254
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET 0x324
-#define PRCM_GPIOCR 0x138
-
-/* GPIOCR register */
-#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
-
-#define PRCM_DDR_SUBSYS_APE_MINBW 0x438
-
-#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 02a15d7c..a25ab9c 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -27,14 +27,14 @@
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/mfd/core.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <linux/regulator/db8500-prcmu.h>
#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/db8500-regs.h>
#include <mach/id.h>
-#include "db8500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
/* Offset for the firmware version within the TCPM */
#define PRCMU_FW_VERSION_OFFSET 0xA4
@@ -131,12 +131,14 @@
#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
#define MB1H_RELEASE_USB_WAKEUP 0x5
+#define MB1H_PLL_ON_OFF 0x6
/* Mailbox 1 Requests */
#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
-#define PRCM_REQ_MB1_APE_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x4)
-#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x8)
+#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC1_OFF 0x4
+#define PLL_SOC1_ON 0x8
/* Mailbox 1 ACKs */
#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
@@ -184,6 +186,11 @@
#define MB4H_HOTDOG 0x12
#define MB4H_HOTMON 0x13
#define MB4H_HOT_PERIOD 0x14
+#define MB4H_A9WDOG_CONF 0x16
+#define MB4H_A9WDOG_EN 0x17
+#define MB4H_A9WDOG_DIS 0x18
+#define MB4H_A9WDOG_LOAD 0x19
+#define MB4H_A9WDOG_KICK 0x20
/* Mailbox 4 Requests */
#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
@@ -196,6 +203,13 @@
#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
#define HOTMON_CONFIG_LOW BIT(0)
#define HOTMON_CONFIG_HIGH BIT(1)
+#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3)
+#define A9WDOG_AUTO_OFF_EN BIT(7)
+#define A9WDOG_AUTO_OFF_DIS 0
+#define A9WDOG_ID_MASK 0xf
/* Mailbox 5 Requests */
#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
@@ -412,7 +426,7 @@
static DEFINE_SPINLOCK(clk_mgt_lock);
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
+#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
CLK_MGT_ENTRY(SGACLK),
CLK_MGT_ENTRY(UARTCLK),
@@ -445,6 +459,35 @@
CLK_MGT_ENTRY(UICCCLK),
};
+static struct regulator *hwacc_regulator[NUM_HW_ACC];
+static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
+
+static bool hwacc_enabled[NUM_HW_ACC];
+static bool hwacc_ret_enabled[NUM_HW_ACC];
+
+static const char *hwacc_regulator_name[NUM_HW_ACC] = {
+ [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp",
+ [HW_ACC_SVAPIPE] = "hwacc-sva-pipe",
+ [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp",
+ [HW_ACC_SIAPIPE] = "hwacc-sia-pipe",
+ [HW_ACC_SGA] = "hwacc-sga",
+ [HW_ACC_B2R2] = "hwacc-b2r2",
+ [HW_ACC_MCDE] = "hwacc-mcde",
+ [HW_ACC_ESRAM1] = "hwacc-esram1",
+ [HW_ACC_ESRAM2] = "hwacc-esram2",
+ [HW_ACC_ESRAM3] = "hwacc-esram3",
+ [HW_ACC_ESRAM4] = "hwacc-esram4",
+};
+
+static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
+ [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret",
+ [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret",
+ [HW_ACC_ESRAM1] = "hwacc-esram1-ret",
+ [HW_ACC_ESRAM2] = "hwacc-esram2-ret",
+ [HW_ACC_ESRAM3] = "hwacc-esram3-ret",
+ [HW_ACC_ESRAM4] = "hwacc-esram4-ret",
+};
+
/*
* Used by MCDE to setup all necessary PRCMU registers
*/
@@ -493,55 +536,51 @@
} prcmu_version;
-int prcmu_enable_dsipll(void)
+int db8500_prcmu_enable_dsipll(void)
{
int i;
unsigned int plldsifreq;
/* Clear DSIPLL_RESETN */
- writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
+ writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
/* Unclamp DSIPLL in/out */
- writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
+ writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
if (prcmu_is_u8400())
plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
else
plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
/* Set DSI PLL FREQ */
- writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
- writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
- (_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
+ writel(plldsifreq, PRCM_PLLDSI_FREQ);
+ writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
/* Enable Escape clocks */
- writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
- (_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+ writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
/* Start DSI PLL */
- writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+ writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
/* Reset DSI PLL */
- writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
+ writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
for (i = 0; i < 10; i++) {
- if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
- PRCMU_PLLDSI_LOCKP_LOCKED)
+ if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
== PRCMU_PLLDSI_LOCKP_LOCKED)
break;
udelay(100);
}
/* Set DSIPLL_RESETN */
- writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
+ writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
return 0;
}
-int prcmu_disable_dsipll(void)
+int db8500_prcmu_disable_dsipll(void)
{
/* Disable dsi pll */
- writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+ writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
/* Disable escapeclock */
- writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
- (_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+ writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
return 0;
}
-int prcmu_set_display_clocks(void)
+int db8500_prcmu_set_display_clocks(void)
{
unsigned long flags;
unsigned int dsiclk;
@@ -554,15 +593,15 @@
spin_lock_irqsave(&clk_mgt_lock, flags);
/* Grab the HW semaphore. */
- while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
- writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
- writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
- writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
+ writel(dsiclk, PRCM_HDMICLK_MGT);
+ writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
+ writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
/* Release the HW semaphore. */
- writel(0, (_PRCMU_BASE + PRCM_SEM));
+ writel(0, PRCM_SEM);
spin_unlock_irqrestore(&clk_mgt_lock, flags);
@@ -578,8 +617,8 @@
unsigned long flags;
spin_lock_irqsave(&gpiocr_lock, flags);
- reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
- writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+ reg = readl(PRCM_GPIOCR);
+ writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
spin_unlock_irqrestore(&gpiocr_lock, flags);
}
@@ -592,8 +631,8 @@
unsigned long flags;
spin_lock_irqsave(&gpiocr_lock, flags);
- reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
- writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+ reg = readl(PRCM_GPIOCR);
+ writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
spin_unlock_irqrestore(&gpiocr_lock, flags);
}
@@ -701,7 +740,7 @@
spin_lock_irqsave(&clkout_lock, flags);
- val = readl(_PRCMU_BASE + PRCM_CLKOCR);
+ val = readl(PRCM_CLKOCR);
if (val & div_mask) {
if (div) {
if ((val & mask) != bits) {
@@ -715,7 +754,7 @@
}
}
}
- writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
+ writel((bits | (val & ~mask)), PRCM_CLKOCR);
requests[clkout] += (div ? 1 : -1);
unlock_and_return:
@@ -724,7 +763,7 @@
return r;
}
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
{
unsigned long flags;
@@ -732,7 +771,7 @@
spin_lock_irqsave(&mb0_transfer.lock, flags);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
@@ -741,7 +780,7 @@
writeb((keep_ulp_clk ? 1 : 0),
(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
@@ -770,18 +809,18 @@
return;
for (i = 0; i < 2; i++) {
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
}
last_dbb_events = dbb_events;
last_abb_events = abb_events;
}
-void prcmu_enable_wakeups(u32 wakeups)
+void db8500_prcmu_enable_wakeups(u32 wakeups)
{
unsigned long flags;
u32 bits;
@@ -802,7 +841,7 @@
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
-void prcmu_config_abb_event_readout(u32 abb_events)
+void db8500_prcmu_config_abb_event_readout(u32 abb_events)
{
unsigned long flags;
@@ -814,7 +853,7 @@
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
-void prcmu_get_abb_event_buffer(void __iomem **buf)
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
{
if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
@@ -823,13 +862,13 @@
}
/**
- * prcmu_set_arm_opp - set the appropriate ARM OPP
+ * db8500_prcmu_set_arm_opp - set the appropriate ARM OPP
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
* This function sets the the operating point of the ARM.
*/
-int prcmu_set_arm_opp(u8 opp)
+int db8500_prcmu_set_arm_opp(u8 opp)
{
int r;
@@ -840,14 +879,14 @@
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -860,11 +899,11 @@
}
/**
- * prcmu_get_arm_opp - get the current ARM OPP
+ * db8500_prcmu_get_arm_opp - get the current ARM OPP
*
* Returns: the current ARM OPP
*/
-int prcmu_get_arm_opp(void)
+int db8500_prcmu_get_arm_opp(void)
{
return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
}
@@ -876,7 +915,7 @@
*/
int prcmu_get_ddr_opp(void)
{
- return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
+ return readb(PRCM_DDR_SUBSYS_APE_MINBW);
}
/**
@@ -892,7 +931,7 @@
return -EINVAL;
/* Changing the DDR OPP can hang the hardware pre-v21 */
if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
- writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
+ writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
return 0;
}
@@ -909,14 +948,14 @@
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -966,12 +1005,12 @@
header = MB1H_RELEASE_APE_OPP_100_VOLT;
}
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != header) ||
@@ -995,13 +1034,13 @@
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_RELEASE_USB_WAKEUP,
(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
@@ -1013,15 +1052,169 @@
return r;
}
+static int request_pll(u8 clock, bool enable)
+{
+ int r = 0;
+
+ if (clock == PRCMU_PLLSOC1)
+ clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
+ else
+ return -EINVAL;
+
+ mutex_lock(&mb1_transfer.lock);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ cpu_relax();
+
+ writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+ writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
+
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+ wait_for_completion(&mb1_transfer.work);
+
+ if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
+ r = -EIO;
+
+ mutex_unlock(&mb1_transfer.lock);
+
+ return r;
+}
+
/**
- * prcmu_set_epod - set the state of a EPOD (power domain)
+ * prcmu_set_hwacc - set the power state of a h/w accelerator
+ * @hwacc_dev: The hardware accelerator (enum hw_acc_dev).
+ * @state: The new power state (enum hw_acc_state).
+ *
+ * This function sets the power state of a hardware accelerator.
+ * This function should not be called from interrupt context.
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator framework API.
+ */
+int prcmu_set_hwacc(u16 hwacc_dev, u8 state)
+{
+ int r = 0;
+ bool ram_retention = false;
+ bool enable, enable_ret;
+
+ /* check argument */
+ BUG_ON(hwacc_dev >= NUM_HW_ACC);
+
+ /* get state of switches */
+ enable = hwacc_enabled[hwacc_dev];
+ enable_ret = hwacc_ret_enabled[hwacc_dev];
+
+ /* set flag if retention is possible */
+ switch (hwacc_dev) {
+ case HW_ACC_SVAMMDSP:
+ case HW_ACC_SIAMMDSP:
+ case HW_ACC_ESRAM1:
+ case HW_ACC_ESRAM2:
+ case HW_ACC_ESRAM3:
+ case HW_ACC_ESRAM4:
+ ram_retention = true;
+ break;
+ }
+
+ /* check argument */
+ BUG_ON(state > HW_ON);
+ BUG_ON(state == HW_OFF_RAMRET && !ram_retention);
+
+ /* modify enable flags */
+ switch (state) {
+ case HW_OFF:
+ enable_ret = false;
+ enable = false;
+ break;
+ case HW_ON:
+ enable = true;
+ break;
+ case HW_OFF_RAMRET:
+ enable_ret = true;
+ enable = false;
+ break;
+ }
+
+ /* get regulator (lazy) */
+ if (hwacc_regulator[hwacc_dev] == NULL) {
+ hwacc_regulator[hwacc_dev] = regulator_get(NULL,
+ hwacc_regulator_name[hwacc_dev]);
+ if (IS_ERR(hwacc_regulator[hwacc_dev])) {
+ pr_err("prcmu: failed to get supply %s\n",
+ hwacc_regulator_name[hwacc_dev]);
+ r = PTR_ERR(hwacc_regulator[hwacc_dev]);
+ goto out;
+ }
+ }
+
+ if (ram_retention) {
+ if (hwacc_ret_regulator[hwacc_dev] == NULL) {
+ hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL,
+ hwacc_ret_regulator_name[hwacc_dev]);
+ if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) {
+ pr_err("prcmu: failed to get supply %s\n",
+ hwacc_ret_regulator_name[hwacc_dev]);
+ r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]);
+ goto out;
+ }
+ }
+ }
+
+ /* set regulators */
+ if (ram_retention) {
+ if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) {
+ r = regulator_enable(hwacc_ret_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: ret enable failed\n");
+ goto out;
+ }
+ hwacc_ret_enabled[hwacc_dev] = true;
+ }
+ }
+
+ if (enable && !hwacc_enabled[hwacc_dev]) {
+ r = regulator_enable(hwacc_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: enable failed\n");
+ goto out;
+ }
+ hwacc_enabled[hwacc_dev] = true;
+ }
+
+ if (!enable && hwacc_enabled[hwacc_dev]) {
+ r = regulator_disable(hwacc_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: disable failed\n");
+ goto out;
+ }
+ hwacc_enabled[hwacc_dev] = false;
+ }
+
+ if (ram_retention) {
+ if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) {
+ r = regulator_disable(hwacc_ret_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: ret disable failed\n");
+ goto out;
+ }
+ hwacc_ret_enabled[hwacc_dev] = false;
+ }
+ }
+
+out:
+ return r;
+}
+EXPORT_SYMBOL(prcmu_set_hwacc);
+
+/**
+ * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
* @epod_id: The EPOD to set
* @epod_state: The new EPOD state
*
* This function sets the state of a EPOD (power domain). It may not be called
* from interrupt context.
*/
-int prcmu_set_epod(u16 epod_id, u8 epod_state)
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
{
int r = 0;
bool ram_retention = false;
@@ -1048,7 +1241,7 @@
mutex_lock(&mb2_transfer.lock);
/* wait for mailbox */
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
cpu_relax();
/* fill in mailbox */
@@ -1058,7 +1251,7 @@
writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
- writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
/*
* The current firmware version does not handle errors correctly,
@@ -1145,13 +1338,13 @@
spin_lock_irqsave(&mb3_transfer.lock, flags);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
cpu_relax();
writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
- writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb3_transfer.lock, flags);
@@ -1177,7 +1370,7 @@
if (!enable)
val |= PRCM_TCR_STOP_TIMERS;
- writel(val, (_PRCMU_BASE + PRCM_TCR));
+ writel(val, PRCM_TCR);
return 0;
}
@@ -1190,7 +1383,7 @@
spin_lock_irqsave(&clk_mgt_lock, flags);
/* Grab the HW semaphore. */
- while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1203,34 +1396,61 @@
writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
/* Release the HW semaphore. */
- writel(0, (_PRCMU_BASE + PRCM_SEM));
+ writel(0, PRCM_SEM);
spin_unlock_irqrestore(&clk_mgt_lock, flags);
return 0;
}
+static int request_sga_clock(u8 clock, bool enable)
+{
+ u32 val;
+ int ret;
+
+ if (enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ ret = request_reg_clock(clock, enable);
+
+ if (!ret && !enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ return ret;
+}
+
/**
- * prcmu_request_clock() - Request for a clock to be enabled or disabled.
+ * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
* @clock: The clock for which the request is made.
* @enable: Whether the clock should be enabled (true) or disabled (false).
*
* This function should only be used by the clock implementation.
* Do not use it from any other place!
*/
-int prcmu_request_clock(u8 clock, bool enable)
+int db8500_prcmu_request_clock(u8 clock, bool enable)
{
+ switch(clock) {
+ case PRCMU_SGACLK:
+ return request_sga_clock(clock, enable);
+ case PRCMU_TIMCLK:
+ return request_timclk(enable);
+ case PRCMU_SYSCLK:
+ return request_sysclk(enable);
+ case PRCMU_PLLSOC1:
+ return request_pll(clock, enable);
+ default:
+ break;
+ }
if (clock < PRCMU_NUM_REG_CLOCKS)
return request_reg_clock(clock, enable);
- else if (clock == PRCMU_TIMCLK)
- return request_timclk(enable);
- else if (clock == PRCMU_SYSCLK)
- return request_sysclk(enable);
- else
- return -EINVAL;
+ return -EINVAL;
}
-int prcmu_config_esram0_deep_sleep(u8 state)
+int db8500_prcmu_config_esram0_deep_sleep(u8 state)
{
if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
(state < ESRAM0_DEEP_SLEEP_STATE_OFF))
@@ -1238,7 +1458,7 @@
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
@@ -1248,7 +1468,7 @@
(tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1260,13 +1480,13 @@
{
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1278,7 +1498,7 @@
{
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
@@ -1287,7 +1507,7 @@
(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1299,13 +1519,13 @@
{
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1326,6 +1546,78 @@
return config_hot_period(0xFFFF);
}
+static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
+{
+
+ mutex_lock(&mb4_transfer.lock);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ cpu_relax();
+
+ writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
+ writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
+ writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
+ writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
+
+ writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
+ wait_for_completion(&mb4_transfer.work);
+
+ mutex_unlock(&mb4_transfer.lock);
+
+ return 0;
+
+}
+
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+ BUG_ON(num == 0 || num > 0xf);
+ return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
+ sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
+ A9WDOG_AUTO_OFF_DIS);
+}
+
+int prcmu_enable_a9wdog(u8 id)
+{
+ return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
+}
+
+int prcmu_disable_a9wdog(u8 id)
+{
+ return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
+}
+
+int prcmu_kick_a9wdog(u8 id)
+{
+ return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
+}
+
+/*
+ * timeout is 28 bit, in ms.
+ */
+#define MAX_WATCHDOG_TIMEOUT 131000
+int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+ if (timeout > MAX_WATCHDOG_TIMEOUT)
+ /*
+ * Due to calculation bug in prcmu fw, timeouts
+ * can't be bigger than 131 seconds.
+ */
+ return -EINVAL;
+
+ return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
+ (id & A9WDOG_ID_MASK) |
+ /*
+ * Put the lowest 28 bits of timeout at
+ * offset 4. Four first bits are used for id.
+ */
+ (u8)((timeout << 4) & 0xf0),
+ (u8)((timeout >> 4) & 0xff),
+ (u8)((timeout >> 12) & 0xff),
+ (u8)((timeout >> 20) & 0xff));
+}
+
/**
* prcmu_set_clock_divider() - Configure the clock divider.
* @clock: The clock for which the request is made.
@@ -1345,7 +1637,7 @@
spin_lock_irqsave(&clk_mgt_lock, flags);
/* Grab the HW semaphore. */
- while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1354,7 +1646,7 @@
writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
/* Release the HW semaphore. */
- writel(0, (_PRCMU_BASE + PRCM_SEM));
+ writel(0, PRCM_SEM);
spin_unlock_irqrestore(&clk_mgt_lock, flags);
@@ -1380,7 +1672,7 @@
mutex_lock(&mb5_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1388,7 +1680,7 @@
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
- writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
if (!wait_for_completion_timeout(&mb5_transfer.work,
msecs_to_jiffies(20000))) {
@@ -1426,7 +1718,7 @@
mutex_lock(&mb5_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1434,7 +1726,7 @@
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
- writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
if (!wait_for_completion_timeout(&mb5_transfer.work,
msecs_to_jiffies(20000))) {
@@ -1456,21 +1748,44 @@
void prcmu_ac_wake_req(void)
{
u32 val;
+ u32 status;
mutex_lock(&mb0_transfer.ac_wake_lock);
- val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+ val = readl(PRCM_HOSTACCESS_REQ);
if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
goto unlock_and_return;
atomic_set(&ac_wake_req_state, 1);
- writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
- (_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+retry:
+ writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), PRCM_HOSTACCESS_REQ);
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
- msecs_to_jiffies(20000))) {
- pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+ msecs_to_jiffies(5000))) {
+ pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
+ __func__);
+ goto unlock_and_return;
+ }
+
+ /*
+ * The modem can generate an AC_WAKE_ACK, and then still go to sleep.
+ * As a workaround, we wait, and then check that the modem is indeed
+ * awake (in terms of the value of the PRCM_MOD_AWAKE_STATUS
+ * register, which may not be the whole truth).
+ */
+ udelay(400);
+ status = (readl(PRCM_MOD_AWAKE_STATUS) & BITS(0, 2));
+ if (status != (PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE |
+ PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE)) {
+ pr_err("prcmu: %s received ack, but modem not awake (0x%X).\n",
+ __func__, status);
+ udelay(1200);
+ writel(val, PRCM_HOSTACCESS_REQ);
+ if (wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+ msecs_to_jiffies(5000)))
+ goto retry;
+ pr_crit("prcmu: %s timed out (5 s) waiting for AC_SLEEP_ACK.\n",
__func__);
}
@@ -1487,16 +1802,16 @@
mutex_lock(&mb0_transfer.ac_wake_lock);
- val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+ val = readl(PRCM_HOSTACCESS_REQ);
if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
goto unlock_and_return;
writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
- (_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+ PRCM_HOSTACCESS_REQ);
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
- msecs_to_jiffies(20000))) {
- pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+ msecs_to_jiffies(5000))) {
+ pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
__func__);
}
@@ -1506,21 +1821,32 @@
mutex_unlock(&mb0_transfer.ac_wake_lock);
}
-bool prcmu_is_ac_wake_requested(void)
+bool db8500_prcmu_is_ac_wake_requested(void)
{
return (atomic_read(&ac_wake_req_state) != 0);
}
/**
- * prcmu_system_reset - System reset
+ * db8500_prcmu_system_reset - System reset
*
- * Saves the reset reason code and then sets the APE_SOFRST register which
+ * Saves the reset reason code and then sets the APE_SOFTRST register which
* fires interrupt to fw
*/
-void prcmu_system_reset(u16 reset_code)
+void db8500_prcmu_system_reset(u16 reset_code)
{
writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
- writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
+ writel(1, PRCM_APE_SOFTRST);
+}
+
+/**
+ * db8500_prcmu_get_reset_code - Retrieve SW reset reason code
+ *
+ * Retrieves the reset reason code stored by prcmu_system_reset() before
+ * last restart.
+ */
+u16 db8500_prcmu_get_reset_code(void)
+{
+ return readw(tcdm_base + PRCM_SW_RST_REASON);
}
/**
@@ -1530,11 +1856,11 @@
{
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
/*
@@ -1551,11 +1877,11 @@
spin_lock_irqsave(&mb0_transfer.lock, flags);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
@@ -1600,7 +1926,7 @@
r = false;
break;
}
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
return r;
}
@@ -1613,7 +1939,7 @@
PRCM_ACK_MB1_CURRENT_APE_OPP);
mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
complete(&mb1_transfer.work);
return false;
}
@@ -1621,14 +1947,14 @@
static bool read_mailbox_2(void)
{
mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
- writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
complete(&mb2_transfer.work);
return false;
}
static bool read_mailbox_3(void)
{
- writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
return false;
}
@@ -1643,6 +1969,11 @@
case MB4H_HOTDOG:
case MB4H_HOTMON:
case MB4H_HOT_PERIOD:
+ case MB4H_A9WDOG_CONF:
+ case MB4H_A9WDOG_EN:
+ case MB4H_A9WDOG_DIS:
+ case MB4H_A9WDOG_LOAD:
+ case MB4H_A9WDOG_KICK:
break;
default:
print_unknown_header_warning(4, header);
@@ -1650,7 +1981,7 @@
break;
}
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
if (do_complete)
complete(&mb4_transfer.work);
@@ -1662,20 +1993,20 @@
{
mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
- writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
complete(&mb5_transfer.work);
return false;
}
static bool read_mailbox_6(void)
{
- writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_7(void)
{
- writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
return false;
}
@@ -1696,7 +2027,7 @@
u8 n;
irqreturn_t r;
- bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
+ bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
if (unlikely(!bits))
return IRQ_NONE;
@@ -1768,7 +2099,7 @@
.irq_unmask = prcmu_irq_unmask,
};
-void __init prcmu_early_init(void)
+void __init db8500_prcmu_early_init(void)
{
unsigned int i;
@@ -1826,6 +2157,16 @@
}
}
+static void __init db8500_prcmu_init_clkforce(void)
+{
+ u32 val;
+
+ val = readl(PRCM_A9PL_FORCE_CLKEN);
+ val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
+ PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
+ writel(val, (PRCM_A9PL_FORCE_CLKEN));
+}
+
/*
* Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
*/
@@ -1861,7 +2202,42 @@
static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
REGULATOR_SUPPLY("vsupply", "b2r2.0"),
- REGULATOR_SUPPLY("vsupply", "mcde.0"),
+ REGULATOR_SUPPLY("vsupply", "mcde"),
+};
+
+/* SVA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
+ REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
+};
+
+/* SVA pipe regulator switch */
+static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
+ REGULATOR_SUPPLY("sva-pipe", "cm_control"),
+};
+
+/* SIA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
+ REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
+};
+
+/* SIA pipe regulator switch */
+static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
+ REGULATOR_SUPPLY("sia-pipe", "cm_control"),
+};
+
+static struct regulator_consumer_supply db8500_sga_consumers[] = {
+ REGULATOR_SUPPLY("v-mali", NULL),
+};
+
+/* ESRAM1 and 2 regulator switch */
+static struct regulator_consumer_supply db8500_esram12_consumers[] = {
+ REGULATOR_SUPPLY("esram12", "cm_control"),
+};
+
+/* ESRAM3 and 4 regulator switch */
+static struct regulator_consumer_supply db8500_esram34_consumers[] = {
+ REGULATOR_SUPPLY("v-esram34", "mcde"),
+ REGULATOR_SUPPLY("esram34", "cm_control"),
};
static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
@@ -1923,6 +2299,8 @@
.name = "db8500-sva-mmdsp",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_svammdsp_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
},
[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
.constraints = {
@@ -1937,6 +2315,8 @@
.name = "db8500-sva-pipe",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_svapipe_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
},
[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
.supply_regulator = "db8500-vape",
@@ -1944,6 +2324,8 @@
.name = "db8500-sia-mmdsp",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_siammdsp_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
},
[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
.constraints = {
@@ -1957,6 +2339,8 @@
.name = "db8500-sia-pipe",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_siapipe_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
},
[DB8500_REGULATOR_SWITCH_SGA] = {
.supply_regulator = "db8500-vape",
@@ -1964,6 +2348,9 @@
.name = "db8500-sga",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_sga_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
+
},
[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
.supply_regulator = "db8500-vape",
@@ -1980,6 +2367,8 @@
.name = "db8500-esram12",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_esram12_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
},
[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
.constraints = {
@@ -1993,6 +2382,8 @@
.name = "db8500-esram34",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_esram34_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
},
[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
.constraints = {
@@ -2024,8 +2415,10 @@
if (ux500_is_svp())
return -ENODEV;
+ db8500_prcmu_init_clkforce();
+
/* Clean up the mailbox interrupts after pre-kernel code. */
- writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
new file mode 100644
index 0000000..ec22e9f
--- /dev/null
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit registers
+ */
+
+#ifndef __DB8500_PRCMU_REGS_H
+#define __DB8500_PRCMU_REGS_H
+
+#include <mach/hardware.h>
+
+#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
+
+#define PRCM_SVACLK_MGT_OFF 0x008
+#define PRCM_SIACLK_MGT_OFF 0x00C
+#define PRCM_SGACLK_MGT_OFF 0x014
+#define PRCM_UARTCLK_MGT_OFF 0x018
+#define PRCM_MSP02CLK_MGT_OFF 0x01C
+#define PRCM_I2CCLK_MGT_OFF 0x020
+#define PRCM_SDMMCCLK_MGT_OFF 0x024
+#define PRCM_SLIMCLK_MGT_OFF 0x028
+#define PRCM_PER1CLK_MGT_OFF 0x02C
+#define PRCM_PER2CLK_MGT_OFF 0x030
+#define PRCM_PER3CLK_MGT_OFF 0x034
+#define PRCM_PER5CLK_MGT_OFF 0x038
+#define PRCM_PER6CLK_MGT_OFF 0x03C
+#define PRCM_PER7CLK_MGT_OFF 0x040
+#define PRCM_PWMCLK_MGT_OFF 0x044 /* for DB5500 */
+#define PRCM_IRDACLK_MGT_OFF 0x048 /* for DB5500 */
+#define PRCM_IRRCCLK_MGT_OFF 0x04C /* for DB5500 */
+#define PRCM_LCDCLK_MGT_OFF 0x044
+#define PRCM_BMLCLK_MGT_OFF 0x04C
+#define PRCM_HSITXCLK_MGT_OFF 0x050
+#define PRCM_HSIRXCLK_MGT_OFF 0x054
+#define PRCM_HDMICLK_MGT_OFF 0x058
+#define PRCM_APEATCLK_MGT_OFF 0x05C
+#define PRCM_APETRACECLK_MGT_OFF 0x060
+#define PRCM_MCDECLK_MGT_OFF 0x064
+#define PRCM_IPI2CCLK_MGT_OFF 0x068
+#define PRCM_DSIALTCLK_MGT_OFF 0x06C
+#define PRCM_DMACLK_MGT_OFF 0x074
+#define PRCM_B2R2CLK_MGT_OFF 0x078
+#define PRCM_TVCLK_MGT_OFF 0x07C
+#define PRCM_UNIPROCLK_MGT_OFF 0x278
+#define PRCM_SSPCLK_MGT_OFF 0x280
+#define PRCM_RNGCLK_MGT_OFF 0x284
+#define PRCM_UICCCLK_MGT_OFF 0x27C
+#define PRCM_MSP1CLK_MGT_OFF 0x288
+
+#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118)
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f
+#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xf
+
+#define PRCM_PLLARM_LOCKP (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
+
+#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1
+
+#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON 0x100
+
+#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN (_PRCMU_BASE + 0x19C)
+#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308)
+
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130)
+#define PRCM_IOCR (_PRCMU_BASE + 0x310)
+#define PRCM_IOCR_IOFORCE 0x1
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104)
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1
+
+#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334)
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
+#define ARM_WAKEUP_MODEM 0x1
+
+#define PRCM_ARM_IT1_CLR (_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174)
+
+#define PRCM_MOD_AWAKE_STATUS (_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE BIT(0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE BIT(1)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO BIT(2)
+
+#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504)
+#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
+#define PRCM_LCDCLK_MGT (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
+#define PRCM_MCDECLK_MGT (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
+#define PRCM_HDMICLK_MGT (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
+#define PRCM_TVCLK_MGT (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
+#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C)
+#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
+#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8)
+
+#define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR_CLKOUT0_REF_CLK (1 << 0)
+#define PRCM_CLKOCR_CLKOUT0_MASK BITS(0, 13)
+#define PRCM_CLKOCR_CLKOUT1_REF_CLK (1 << 16)
+#define PRCM_CLKOCR_CLKOUT1_MASK BITS(16, 29)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324)
+#define PRCM_GPIOCR (_PRCMU_BASE + 0x138)
+#define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800
+#define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1
+
+/* PRCMU HW semaphore */
+#define PRCM_SEM (_PRCMU_BASE + 0x400)
+#define PRCM_SEM_PRCM_SEM BIT(0)
+
+#define PRCM_TCR (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR_TENSEL_MASK BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS BIT(16)
+#define PRCM_TCR_DOZE_MODE BIT(17)
+
+#define PRCM_CLKOCR_CLKODIV0_SHIFT 0
+#define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5)
+#define PRCM_CLKOCR_CLKOSEL0_SHIFT 6
+#define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8)
+#define PRCM_CLKOCR_CLKODIV1_SHIFT 16
+#define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21)
+#define PRCM_CLKOCR_CLKOSEL1_SHIFT 22
+#define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24)
+#define PRCM_CLKOCR_CLK1TYPE BIT(28)
+
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN BIT(8)
+
+/* GPIOCR register */
+#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
+
+#define PRCM_DDR_SUBSYS_APE_MINBW (_PRCMU_BASE + 0x438)
+#define PRCM_CGATING_BYPASS (_PRCMU_BASE + 0x134)
+#define PRCM_CGATING_BYPASS_ICN2 BIT(6)
+
+/* Miscellaneous unit registers */
+#define PRCM_RESOUTN_SET (_PRCMU_BASE + 0x214)
+#define PRCM_RESOUTN_CLR (_PRCMU_BASE + 0x218)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
+
+#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
new file mode 100644
index 0000000..97c2776
--- /dev/null
+++ b/drivers/mfd/intel_msic.c
@@ -0,0 +1,502 @@
+/*
+ * Driver for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/intel_scu_ipc.h>
+
+#define MSIC_VENDOR(id) ((id >> 6) & 3)
+#define MSIC_VERSION(id) (id & 0x3f)
+#define MSIC_MAJOR(id) ('A' + ((id >> 3) & 7))
+#define MSIC_MINOR(id) (id & 7)
+
+/*
+ * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
+ * Since IRQ block starts from address 0x002 we need to substract that from
+ * the actual IRQ status register address.
+ */
+#define MSIC_IRQ_STATUS(x) (INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
+#define MSIC_IRQ_STATUS_ACCDET MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
+
+/*
+ * The SCU hardware has limitation of 16 bytes per read/write buffer on
+ * Medfield.
+ */
+#define SCU_IPC_RWBUF_LIMIT 16
+
+/**
+ * struct intel_msic - an MSIC MFD instance
+ * @pdev: pointer to the platform device
+ * @vendor: vendor ID
+ * @version: chip version
+ * @irq_base: base address of the mapped MSIC SRAM interrupt tree
+ */
+struct intel_msic {
+ struct platform_device *pdev;
+ unsigned vendor;
+ unsigned version;
+ void __iomem *irq_base;
+};
+
+static struct resource msic_touch_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_adc_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_battery_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_gpio_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_audio_resources[] = {
+ {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ },
+ /*
+ * We will pass IRQ_BASE to the driver now but this can be removed
+ * when/if the driver starts to use intel_msic_irq_read().
+ */
+ {
+ .name = "IRQ_BASE",
+ .flags = IORESOURCE_MEM,
+ .start = MSIC_IRQ_STATUS_ACCDET,
+ .end = MSIC_IRQ_STATUS_ACCDET,
+ },
+};
+
+static struct resource msic_hdmi_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_thermal_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_power_btn_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_ocd_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * Devices that are part of the MSIC and are available via firmware
+ * populated SFI DEVS table.
+ */
+static struct mfd_cell msic_devs[] = {
+ [INTEL_MSIC_BLOCK_TOUCH] = {
+ .name = "msic_touch",
+ .num_resources = ARRAY_SIZE(msic_touch_resources),
+ .resources = msic_touch_resources,
+ },
+ [INTEL_MSIC_BLOCK_ADC] = {
+ .name = "msic_adc",
+ .num_resources = ARRAY_SIZE(msic_adc_resources),
+ .resources = msic_adc_resources,
+ },
+ [INTEL_MSIC_BLOCK_BATTERY] = {
+ .name = "msic_battery",
+ .num_resources = ARRAY_SIZE(msic_battery_resources),
+ .resources = msic_battery_resources,
+ },
+ [INTEL_MSIC_BLOCK_GPIO] = {
+ .name = "msic_gpio",
+ .num_resources = ARRAY_SIZE(msic_gpio_resources),
+ .resources = msic_gpio_resources,
+ },
+ [INTEL_MSIC_BLOCK_AUDIO] = {
+ .name = "msic_audio",
+ .num_resources = ARRAY_SIZE(msic_audio_resources),
+ .resources = msic_audio_resources,
+ },
+ [INTEL_MSIC_BLOCK_HDMI] = {
+ .name = "msic_hdmi",
+ .num_resources = ARRAY_SIZE(msic_hdmi_resources),
+ .resources = msic_hdmi_resources,
+ },
+ [INTEL_MSIC_BLOCK_THERMAL] = {
+ .name = "msic_thermal",
+ .num_resources = ARRAY_SIZE(msic_thermal_resources),
+ .resources = msic_thermal_resources,
+ },
+ [INTEL_MSIC_BLOCK_POWER_BTN] = {
+ .name = "msic_power_btn",
+ .num_resources = ARRAY_SIZE(msic_power_btn_resources),
+ .resources = msic_power_btn_resources,
+ },
+ [INTEL_MSIC_BLOCK_OCD] = {
+ .name = "msic_ocd",
+ .num_resources = ARRAY_SIZE(msic_ocd_resources),
+ .resources = msic_ocd_resources,
+ },
+};
+
+/*
+ * Other MSIC related devices which are not directly available via SFI DEVS
+ * table. These can be pseudo devices, regulators etc. which are needed for
+ * different purposes.
+ *
+ * These devices appear only after the MSIC driver itself is initialized so
+ * we can guarantee that the SCU IPC interface is ready.
+ */
+static struct mfd_cell msic_other_devs[] = {
+ /* Audio codec in the MSIC */
+ {
+ .id = -1,
+ .name = "sn95031",
+ },
+};
+
+/**
+ * intel_msic_reg_read - read a single MSIC register
+ * @reg: register to read
+ * @val: register value is placed here
+ *
+ * Read a single register from MSIC. Returns %0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_read(unsigned short reg, u8 *val)
+{
+ return intel_scu_ipc_ioread8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_read);
+
+/**
+ * intel_msic_reg_write - write a single MSIC register
+ * @reg: register to write
+ * @val: value to write to that register
+ *
+ * Write a single MSIC register. Returns 0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_write(unsigned short reg, u8 val)
+{
+ return intel_scu_ipc_iowrite8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_write);
+
+/**
+ * intel_msic_reg_update - update a single MSIC register
+ * @reg: register to update
+ * @val: value to write to the register
+ * @mask: specifies which of the bits are updated (%0 = don't update,
+ * %1 = update)
+ *
+ * Perform an update to a register @reg. @mask is used to specify which
+ * bits are updated. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
+{
+ return intel_scu_ipc_update_register(reg, val, mask);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_update);
+
+/**
+ * intel_msic_bulk_read - read an array of registers
+ * @reg: array of register addresses to read
+ * @buf: array where the read values are placed
+ * @count: number of registers to read
+ *
+ * Function reads @count registers from the MSIC using addresses passed in
+ * @reg. Read values are placed in @buf. Reads are performed atomically
+ * wrt. MSIC.
+ *
+ * Returns %0 in case of success and negative errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
+{
+ if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+ return -EINVAL;
+
+ return intel_scu_ipc_readv(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
+
+/**
+ * intel_msic_bulk_write - write an array of values to the MSIC registers
+ * @reg: array of registers to write
+ * @buf: values to write to each register
+ * @count: number of registers to write
+ *
+ * Function writes @count registers in @buf to MSIC. Writes are performed
+ * atomically wrt MSIC. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
+{
+ if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+ return -EINVAL;
+
+ return intel_scu_ipc_writev(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
+
+/**
+ * intel_msic_irq_read - read a register from an MSIC interrupt tree
+ * @msic: MSIC instance
+ * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
+ * %INTEL_MSIC_RESETIRQ2)
+ * @val: value of the register is placed here
+ *
+ * This function can be used by an MSIC subdevice interrupt handler to read
+ * a register value from the MSIC interrupt tree. In this way subdevice
+ * drivers don't have to map in the interrupt tree themselves but can just
+ * call this function instead.
+ *
+ * Function doesn't sleep and is callable from interrupt context.
+ *
+ * Returns %-EINVAL if @reg is outside of the allowed register region.
+ */
+int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
+{
+ if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
+ return -EINVAL;
+
+ *val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_msic_irq_read);
+
+static int __devinit intel_msic_init_devices(struct intel_msic *msic)
+{
+ struct platform_device *pdev = msic->pdev;
+ struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+ int ret, i;
+
+ if (pdata->gpio) {
+ struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
+
+ cell->platform_data = pdata->gpio;
+ cell->pdata_size = sizeof(*pdata->gpio);
+ }
+
+ if (pdata->ocd) {
+ unsigned gpio = pdata->ocd->gpio;
+
+ ret = gpio_request_one(gpio, GPIOF_IN, "ocd_gpio");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register OCD GPIO\n");
+ return ret;
+ }
+
+ ret = gpio_to_irq(gpio);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
+ gpio_free(gpio);
+ return ret;
+ }
+
+ /* Update the IRQ number for the OCD */
+ pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
+ if (!pdata->irq[i])
+ continue;
+
+ ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
+ pdata->irq[i]);
+ if (ret)
+ goto fail;
+ }
+
+ ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
+ ARRAY_SIZE(msic_other_devs), NULL, 0);
+ if (ret)
+ goto fail;
+
+ return 0;
+
+fail:
+ mfd_remove_devices(&pdev->dev);
+ if (pdata->ocd)
+ gpio_free(pdata->ocd->gpio);
+
+ return ret;
+}
+
+static void __devexit intel_msic_remove_devices(struct intel_msic *msic)
+{
+ struct platform_device *pdev = msic->pdev;
+ struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+
+ mfd_remove_devices(&pdev->dev);
+
+ if (pdata->ocd)
+ gpio_free(pdata->ocd->gpio);
+}
+
+static int __devinit intel_msic_probe(struct platform_device *pdev)
+{
+ struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+ struct intel_msic *msic;
+ struct resource *res;
+ u8 id0, id1;
+ int ret;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data passed\n");
+ return -EINVAL;
+ }
+
+ /* First validate that we have an MSIC in place */
+ ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
+ return -ENXIO;
+ }
+
+ ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
+ return -ENXIO;
+ }
+
+ if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
+ dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
+ return -ENXIO;
+ }
+
+ msic = kzalloc(sizeof(*msic), GFP_KERNEL);
+ if (!msic)
+ return -ENOMEM;
+
+ msic->vendor = MSIC_VENDOR(id0);
+ msic->version = MSIC_VERSION(id0);
+ msic->pdev = pdev;
+
+ /*
+ * Map in the MSIC interrupt tree area in SRAM. This is exposed to
+ * the clients via intel_msic_irq_read().
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get SRAM iomem resource\n");
+ ret = -ENODEV;
+ goto fail_free_msic;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ ret = -EBUSY;
+ goto fail_free_msic;
+ }
+
+ msic->irq_base = ioremap_nocache(res->start, resource_size(res));
+ if (!msic->irq_base) {
+ dev_err(&pdev->dev, "failed to map SRAM memory\n");
+ ret = -ENOMEM;
+ goto fail_release_region;
+ }
+
+ platform_set_drvdata(pdev, msic);
+
+ ret = intel_msic_init_devices(msic);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
+ goto fail_unmap_mem;
+ }
+
+ dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
+ MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
+ msic->vendor);
+
+ return 0;
+
+fail_unmap_mem:
+ iounmap(msic->irq_base);
+fail_release_region:
+ release_mem_region(res->start, resource_size(res));
+fail_free_msic:
+ kfree(msic);
+
+ return ret;
+}
+
+static int __devexit intel_msic_remove(struct platform_device *pdev)
+{
+ struct intel_msic *msic = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ intel_msic_remove_devices(msic);
+ platform_set_drvdata(pdev, NULL);
+ iounmap(msic->irq_base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(msic);
+
+ return 0;
+}
+
+static struct platform_driver intel_msic_driver = {
+ .probe = intel_msic_probe,
+ .remove = __devexit_p(intel_msic_remove),
+ .driver = {
+ .name = "intel_msic",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init intel_msic_init(void)
+{
+ return platform_driver_register(&intel_msic_driver);
+}
+module_init(intel_msic_init);
+
+static void __exit intel_msic_exit(void)
+{
+ platform_driver_unregister(&intel_msic_driver);
+}
+module_exit(intel_msic_exit);
+
+MODULE_DESCRIPTION("Driver for Intel MSIC");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 563654c..1e9ee53 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -328,7 +328,7 @@
return 0;
}
-struct platform_driver jz4740_adc_driver = {
+static struct platform_driver jz4740_adc_driver = {
.probe = jz4740_adc_probe,
.remove = __devexit_p(jz4740_adc_remove),
.driver = {
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index f83103b..dc58750 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
@@ -142,7 +143,6 @@
max8997->irq_base = pdata->irq_base;
max8997->ono = pdata->ono;
- max8997->wakeup = pdata->wakeup;
mutex_init(&max8997->iolock);
@@ -169,6 +169,9 @@
if (ret < 0)
goto err_mfd;
+ /* MAX8997 has a power button input. */
+ device_init_wakeup(max8997->dev, pdata->wakeup);
+
return ret;
err_mfd:
@@ -398,7 +401,29 @@
return 0;
}
+static int max8997_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ irq_set_irq_wake(max8997->irq, 1);
+ return 0;
+}
+
+static int max8997_resume(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ irq_set_irq_wake(max8997->irq, 0);
+ return max8997_irq_resume(max8997);
+}
+
const struct dev_pm_ops max8997_pm = {
+ .suspend = max8997_suspend,
+ .resume = max8997_resume,
.freeze = max8997_freeze,
.restore = max8997_restore,
};
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 7e4d44b..e9619ac 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -26,20 +26,10 @@
irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
void *irqdata[MC13XXX_NUM_IRQ];
-};
-
-struct mc13783 {
- struct mc13xxx mc13xxx;
int adcflags;
};
-struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783)
-{
- return &mc13783->mc13xxx;
-}
-EXPORT_SYMBOL(mc13783_to_mc13xxx);
-
#define MC13XXX_IRQSTAT0 0
#define MC13XXX_IRQSTAT0_ADCDONEI (1 << 0)
#define MC13XXX_IRQSTAT0_ADCBISDONEI (1 << 1)
@@ -136,14 +126,14 @@
#define MC13XXX_REVISION_FAB (0x03 << 11)
#define MC13XXX_REVISION_ICIDCODE (0x3f << 13)
-#define MC13783_ADC1 44
-#define MC13783_ADC1_ADEN (1 << 0)
-#define MC13783_ADC1_RAND (1 << 1)
-#define MC13783_ADC1_ADSEL (1 << 3)
-#define MC13783_ADC1_ASC (1 << 20)
-#define MC13783_ADC1_ADTRIGIGN (1 << 21)
+#define MC13XXX_ADC1 44
+#define MC13XXX_ADC1_ADEN (1 << 0)
+#define MC13XXX_ADC1_RAND (1 << 1)
+#define MC13XXX_ADC1_ADSEL (1 << 3)
+#define MC13XXX_ADC1_ASC (1 << 20)
+#define MC13XXX_ADC1_ADTRIGIGN (1 << 21)
-#define MC13783_ADC2 45
+#define MC13XXX_ADC2 45
#define MC13XXX_NUMREGS 0x3f
@@ -487,7 +477,7 @@
MC13XXX_ID_INVALID,
};
-const char *mc13xxx_chipname[] = {
+static const char *mc13xxx_chipname[] = {
[MC13XXX_ID_MC13783] = "mc13783",
[MC13XXX_ID_MC13892] = "mc13892",
};
@@ -558,8 +548,6 @@
return mc13xxx_chipname[devid->driver_data];
}
-#include <linux/mfd/mc13783.h>
-
int mc13xxx_get_flags(struct mc13xxx *mc13xxx)
{
struct mc13xxx_platform_data *pdata =
@@ -569,15 +557,15 @@
}
EXPORT_SYMBOL(mc13xxx_get_flags);
-#define MC13783_ADC1_CHAN0_SHIFT 5
-#define MC13783_ADC1_CHAN1_SHIFT 8
+#define MC13XXX_ADC1_CHAN0_SHIFT 5
+#define MC13XXX_ADC1_CHAN1_SHIFT 8
struct mc13xxx_adcdone_data {
struct mc13xxx *mc13xxx;
struct completion done;
};
-static irqreturn_t mc13783_handler_adcdone(int irq, void *data)
+static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data)
{
struct mc13xxx_adcdone_data *adcdone_data = data;
@@ -588,12 +576,11 @@
return IRQ_HANDLED;
}
-#define MC13783_ADC_WORKING (1 << 0)
+#define MC13XXX_ADC_WORKING (1 << 0)
-int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
unsigned int channel, unsigned int *sample)
{
- struct mc13xxx *mc13xxx = &mc13783->mc13xxx;
u32 adc0, adc1, old_adc0;
int i, ret;
struct mc13xxx_adcdone_data adcdone_data = {
@@ -605,51 +592,51 @@
mc13xxx_lock(mc13xxx);
- if (mc13783->adcflags & MC13783_ADC_WORKING) {
+ if (mc13xxx->adcflags & MC13XXX_ADC_WORKING) {
ret = -EBUSY;
goto out;
}
- mc13783->adcflags |= MC13783_ADC_WORKING;
+ mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
- mc13xxx_reg_read(mc13xxx, MC13783_ADC0, &old_adc0);
+ mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
- adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
- adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN | MC13783_ADC1_ASC;
+ adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
+ adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
if (channel > 7)
- adc1 |= MC13783_ADC1_ADSEL;
+ adc1 |= MC13XXX_ADC1_ADSEL;
switch (mode) {
- case MC13783_ADC_MODE_TS:
- adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_TSMOD0 |
- MC13783_ADC0_TSMOD1;
- adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+ case MC13XXX_ADC_MODE_TS:
+ adc0 |= MC13XXX_ADC0_ADREFEN | MC13XXX_ADC0_TSMOD0 |
+ MC13XXX_ADC0_TSMOD1;
+ adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
break;
- case MC13783_ADC_MODE_SINGLE_CHAN:
- adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
- adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
- adc1 |= MC13783_ADC1_RAND;
+ case MC13XXX_ADC_MODE_SINGLE_CHAN:
+ adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+ adc1 |= (channel & 0x7) << MC13XXX_ADC1_CHAN0_SHIFT;
+ adc1 |= MC13XXX_ADC1_RAND;
break;
- case MC13783_ADC_MODE_MULT_CHAN:
- adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
- adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+ case MC13XXX_ADC_MODE_MULT_CHAN:
+ adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+ adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
break;
default:
- mc13783_unlock(mc13783);
+ mc13xxx_unlock(mc13xxx);
return -EINVAL;
}
- dev_dbg(&mc13783->mc13xxx.spidev->dev, "%s: request irq\n", __func__);
- mc13xxx_irq_request(mc13xxx, MC13783_IRQ_ADCDONE,
- mc13783_handler_adcdone, __func__, &adcdone_data);
- mc13xxx_irq_ack(mc13xxx, MC13783_IRQ_ADCDONE);
+ dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__);
+ mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+ mc13xxx_handler_adcdone, __func__, &adcdone_data);
+ mc13xxx_irq_ack(mc13xxx, MC13XXX_IRQ_ADCDONE);
- mc13xxx_reg_write(mc13xxx, MC13783_ADC0, adc0);
- mc13xxx_reg_write(mc13xxx, MC13783_ADC1, adc1);
+ mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
+ mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
mc13xxx_unlock(mc13xxx);
@@ -660,27 +647,27 @@
mc13xxx_lock(mc13xxx);
- mc13xxx_irq_free(mc13xxx, MC13783_IRQ_ADCDONE, &adcdone_data);
+ mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_ADCDONE, &adcdone_data);
if (ret > 0)
for (i = 0; i < 4; ++i) {
ret = mc13xxx_reg_read(mc13xxx,
- MC13783_ADC2, &sample[i]);
+ MC13XXX_ADC2, &sample[i]);
if (ret)
break;
}
- if (mode == MC13783_ADC_MODE_TS)
+ if (mode == MC13XXX_ADC_MODE_TS)
/* restore TSMOD */
- mc13xxx_reg_write(mc13xxx, MC13783_ADC0, old_adc0);
+ mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, old_adc0);
- mc13783->adcflags &= ~MC13783_ADC_WORKING;
+ mc13xxx->adcflags &= ~MC13XXX_ADC_WORKING;
out:
mc13xxx_unlock(mc13xxx);
return ret;
}
-EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion);
+EXPORT_SYMBOL_GPL(mc13xxx_adc_do_conversion);
static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx,
const char *format, void *pdata, size_t pdata_size)
@@ -716,6 +703,11 @@
enum mc13xxx_id id;
int ret;
+ if (!pdata) {
+ dev_err(&spi->dev, "invalid platform data\n");
+ return -EINVAL;
+ }
+
mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
if (!mc13xxx)
return -ENOMEM;
@@ -763,10 +755,8 @@
if (pdata->flags & MC13XXX_USE_CODEC)
mc13xxx_add_subdevice(mc13xxx, "%s-codec");
- if (pdata->flags & MC13XXX_USE_REGULATOR) {
- mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
- &pdata->regulators, sizeof(pdata->regulators));
- }
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
+ &pdata->regulators, sizeof(pdata->regulators));
if (pdata->flags & MC13XXX_USE_RTC)
mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
@@ -774,10 +764,14 @@
if (pdata->flags & MC13XXX_USE_TOUCHSCREEN)
mc13xxx_add_subdevice(mc13xxx, "%s-ts");
- if (pdata->flags & MC13XXX_USE_LED)
+ if (pdata->leds)
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-led",
pdata->leds, sizeof(*pdata->leds));
+ if (pdata->buttons)
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
+ pdata->buttons, sizeof(*pdata->buttons));
+
return 0;
}
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 9cee8e7..cb4910a 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -44,7 +44,7 @@
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/menelaus.h>
#define DRIVER_NAME "menelaus"
@@ -1226,7 +1226,7 @@
menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
if (client->irq > 0) {
- err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
+ err = request_irq(client->irq, menelaus_irq, 0,
DRIVER_NAME, menelaus);
if (err) {
dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 57868416..ff1a7e7 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -23,45 +23,22 @@
#include <linux/i2c.h>
#include <linux/pm.h>
#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
#include <linux/mfd/pcf50633/core.h>
-static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
- int ret;
-
- ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
- num, data);
- if (ret < 0)
- dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
-
- return ret;
-}
-
-static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
- int ret;
-
- ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
- num, data);
- if (ret < 0)
- dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
-
- return ret;
-
-}
-
/* Read a block of up to 32 regs */
int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
int nr_regs, u8 *data)
{
int ret;
- mutex_lock(&pcf->lock);
- ret = __pcf50633_read(pcf, reg, nr_regs, data);
- mutex_unlock(&pcf->lock);
+ ret = regmap_raw_read(pcf->regmap, reg, data, nr_regs);
+ if (ret != 0)
+ return ret;
- return ret;
+ return nr_regs;
}
EXPORT_SYMBOL_GPL(pcf50633_read_block);
@@ -71,21 +48,22 @@
{
int ret;
- mutex_lock(&pcf->lock);
- ret = __pcf50633_write(pcf, reg, nr_regs, data);
- mutex_unlock(&pcf->lock);
+ ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs);
+ if (ret != 0)
+ return ret;
- return ret;
+ return nr_regs;
}
EXPORT_SYMBOL_GPL(pcf50633_write_block);
u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg)
{
- u8 val;
+ unsigned int val;
+ int ret;
- mutex_lock(&pcf->lock);
- __pcf50633_read(pcf, reg, 1, &val);
- mutex_unlock(&pcf->lock);
+ ret = regmap_read(pcf->regmap, reg, &val);
+ if (ret < 0)
+ return -1;
return val;
}
@@ -93,56 +71,19 @@
int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val)
{
- int ret;
-
- mutex_lock(&pcf->lock);
- ret = __pcf50633_write(pcf, reg, 1, &val);
- mutex_unlock(&pcf->lock);
-
- return ret;
+ return regmap_write(pcf->regmap, reg, val);
}
EXPORT_SYMBOL_GPL(pcf50633_reg_write);
int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val)
{
- int ret;
- u8 tmp;
-
- val &= mask;
-
- mutex_lock(&pcf->lock);
- ret = __pcf50633_read(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- tmp &= ~mask;
- tmp |= val;
- ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
- mutex_unlock(&pcf->lock);
-
- return ret;
+ return regmap_update_bits(pcf->regmap, reg, mask, val);
}
EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask);
int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val)
{
- int ret;
- u8 tmp;
-
- mutex_lock(&pcf->lock);
- ret = __pcf50633_read(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- tmp &= ~val;
- ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
- mutex_unlock(&pcf->lock);
-
- return ret;
+ return regmap_update_bits(pcf->regmap, reg, val, 0);
}
EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits);
@@ -251,6 +192,11 @@
static SIMPLE_DEV_PM_OPS(pcf50633_pm, pcf50633_suspend, pcf50633_resume);
+static struct regmap_config pcf50633_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
static int __devinit pcf50633_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
@@ -272,16 +218,23 @@
mutex_init(&pcf->lock);
+ pcf->regmap = regmap_init_i2c(client, &pcf50633_regmap_config);
+ if (IS_ERR(pcf->regmap)) {
+ ret = PTR_ERR(pcf->regmap);
+ dev_err(pcf->dev, "Failed to allocate register map: %d\n",
+ ret);
+ goto err_free;
+ }
+
i2c_set_clientdata(client, pcf);
pcf->dev = &client->dev;
- pcf->i2c_client = client;
version = pcf50633_reg_read(pcf, 0);
variant = pcf50633_reg_read(pcf, 1);
if (version < 0 || variant < 0) {
dev_err(pcf->dev, "Unable to probe pcf50633\n");
ret = -ENODEV;
- goto err_free;
+ goto err_regmap;
}
dev_info(pcf->dev, "Probed device version %d variant %d\n",
@@ -328,6 +281,8 @@
return 0;
+err_regmap:
+ regmap_exit(pcf->regmap);
err_free:
kfree(pcf);
@@ -351,6 +306,7 @@
for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
platform_device_unregister(pcf->regulator_pdev[i]);
+ regmap_exit(pcf->regmap);
kfree(pcf);
return 0;
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index c27e515..de97974 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -357,6 +357,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int tc3589x_suspend(struct device *dev)
{
struct tc3589x *tc3589x = dev_get_drvdata(dev);
@@ -387,6 +388,7 @@
static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend,
tc3589x_resume);
+#endif
static const struct i2c_device_id tc3589x_id[] = {
{ "tc3589x", 24 },
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 696879e..02d6569 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -697,7 +697,7 @@
dev_err(&dev->dev, "The driver supports an older "
"version of the FPGA, please update the driver to "
"support %d.%d\n", priv->fw.major, priv->fw.minor);
- goto err_ioremap;
+ goto err_config;
}
if (priv->fw.major < TIMB_SUPPORTED_MAJOR ||
priv->fw.minor < TIMB_REQUIRED_MINOR) {
@@ -705,13 +705,13 @@
"please upgrade the FPGA to at least: %d.%d\n",
priv->fw.major, priv->fw.minor,
TIMB_SUPPORTED_MAJOR, TIMB_REQUIRED_MINOR);
- goto err_ioremap;
+ goto err_config;
}
msix_entries = kzalloc(TIMBERDALE_NR_IRQS * sizeof(*msix_entries),
GFP_KERNEL);
if (!msix_entries)
- goto err_ioremap;
+ goto err_config;
for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
msix_entries[i].entry = i;
@@ -825,6 +825,8 @@
err_create_file:
pci_disable_msix(dev);
err_msix:
+ kfree(msix_entries);
+err_config:
iounmap(priv->ctl_membase);
err_ioremap:
release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
@@ -833,7 +835,6 @@
err_start:
pci_disable_device(dev);
err_enable:
- kfree(msix_entries);
kfree(priv);
pci_set_drvdata(dev, NULL);
return -ENODEV;
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 955bc00..5fec23a 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -131,9 +131,6 @@
if (init_data == NULL)
return -ENOMEM;
- init_data->irq = pmic_plat_data->irq;
- init_data->irq_base = pmic_plat_data->irq;
-
mutex_init(&tps65912->io_mutex);
dev_set_drvdata(tps65912->dev, tps65912);
@@ -153,10 +150,13 @@
if (ret < 0)
goto err;
+ init_data->irq = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq;
ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
if (ret < 0)
goto err;
+ kfree(init_data);
return ret;
err:
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 01ecfeee6..b8eef46 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -109,7 +109,7 @@
#define twl_has_watchdog() false
#endif
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\
defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE)
#define twl_has_codec() true
#else
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 8a7ee31..f062c8c 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -30,7 +30,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/kthread.h>
#include <linux/slab.h>
#include <linux/i2c/twl.h>
@@ -278,59 +277,6 @@
static unsigned twl4030_irq_base;
-static struct completion irq_event;
-
-/*
- * This thread processes interrupts reported by the Primary Interrupt Handler.
- */
-static int twl4030_irq_thread(void *data)
-{
- long irq = (long)data;
- static unsigned i2c_errors;
- static const unsigned max_i2c_errors = 100;
-
-
- current->flags |= PF_NOFREEZE;
-
- while (!kthread_should_stop()) {
- int ret;
- int module_irq;
- u8 pih_isr;
-
- /* Wait for IRQ, then read PIH irq status (also blocking) */
- wait_for_completion_interruptible(&irq_event);
-
- ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
- REG_PIH_ISR_P1);
- if (ret) {
- pr_warning("twl4030: I2C error %d reading PIH ISR\n",
- ret);
- if (++i2c_errors >= max_i2c_errors) {
- printk(KERN_ERR "Maximum I2C error count"
- " exceeded. Terminating %s.\n",
- __func__);
- break;
- }
- complete(&irq_event);
- continue;
- }
-
- /* these handlers deal with the relevant SIH irq status */
- local_irq_disable();
- for (module_irq = twl4030_irq_base;
- pih_isr;
- pih_isr >>= 1, module_irq++) {
- if (pih_isr & 0x1)
- generic_handle_irq(module_irq);
- }
- local_irq_enable();
-
- enable_irq(irq);
- }
-
- return 0;
-}
-
/*
* handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
* This is a chained interrupt, so there is no desc->action method for it.
@@ -342,9 +288,25 @@
*/
static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
- /* Acknowledge, clear *AND* mask the interrupt... */
- disable_irq_nosync(irq);
- complete(devid);
+ int module_irq;
+ irqreturn_t ret;
+ u8 pih_isr;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+ REG_PIH_ISR_P1);
+ if (ret) {
+ pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret);
+ return IRQ_NONE;
+ }
+
+ /* these handlers deal with the relevant SIH irq status */
+ for (module_irq = twl4030_irq_base;
+ pih_isr;
+ pih_isr >>= 1, module_irq++) {
+ if (pih_isr & 0x1)
+ handle_nested_irq(module_irq);
+ }
+
return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
@@ -460,114 +422,18 @@
/*----------------------------------------------------------------------*/
-static DEFINE_SPINLOCK(sih_agent_lock);
-
-static struct workqueue_struct *wq;
-
struct sih_agent {
int irq_base;
const struct sih *sih;
u32 imr;
bool imr_change_pending;
- struct work_struct mask_work;
u32 edge_change;
- struct work_struct edge_work;
+
+ struct mutex irq_lock;
};
-static void twl4030_sih_do_mask(struct work_struct *work)
-{
- struct sih_agent *agent;
- const struct sih *sih;
- union {
- u8 bytes[4];
- u32 word;
- } imr;
- int status;
-
- agent = container_of(work, struct sih_agent, mask_work);
-
- /* see what work we have */
- spin_lock_irq(&sih_agent_lock);
- if (agent->imr_change_pending) {
- sih = agent->sih;
- /* byte[0] gets overwritten as we write ... */
- imr.word = cpu_to_le32(agent->imr << 8);
- agent->imr_change_pending = false;
- } else
- sih = NULL;
- spin_unlock_irq(&sih_agent_lock);
- if (!sih)
- return;
-
- /* write the whole mask ... simpler than subsetting it */
- status = twl_i2c_write(sih->module, imr.bytes,
- sih->mask[irq_line].imr_offset, sih->bytes_ixr);
- if (status)
- pr_err("twl4030: %s, %s --> %d\n", __func__,
- "write", status);
-}
-
-static void twl4030_sih_do_edge(struct work_struct *work)
-{
- struct sih_agent *agent;
- const struct sih *sih;
- u8 bytes[6];
- u32 edge_change;
- int status;
-
- agent = container_of(work, struct sih_agent, edge_work);
-
- /* see what work we have */
- spin_lock_irq(&sih_agent_lock);
- edge_change = agent->edge_change;
- agent->edge_change = 0;
- sih = edge_change ? agent->sih : NULL;
- spin_unlock_irq(&sih_agent_lock);
- if (!sih)
- return;
-
- /* Read, reserving first byte for write scratch. Yes, this
- * could be cached for some speedup ... but be careful about
- * any processor on the other IRQ line, EDR registers are
- * shared.
- */
- status = twl_i2c_read(sih->module, bytes + 1,
- sih->edr_offset, sih->bytes_edr);
- if (status) {
- pr_err("twl4030: %s, %s --> %d\n", __func__,
- "read", status);
- return;
- }
-
- /* Modify only the bits we know must change */
- while (edge_change) {
- int i = fls(edge_change) - 1;
- struct irq_data *idata = irq_get_irq_data(i + agent->irq_base);
- int byte = 1 + (i >> 2);
- int off = (i & 0x3) * 2;
- unsigned int type;
-
- bytes[byte] &= ~(0x03 << off);
-
- type = irqd_get_trigger_type(idata);
- if (type & IRQ_TYPE_EDGE_RISING)
- bytes[byte] |= BIT(off + 1);
- if (type & IRQ_TYPE_EDGE_FALLING)
- bytes[byte] |= BIT(off + 0);
-
- edge_change &= ~BIT(i);
- }
-
- /* Write */
- status = twl_i2c_write(sih->module, bytes,
- sih->edr_offset, sih->bytes_edr);
- if (status)
- pr_err("twl4030: %s, %s --> %d\n", __func__,
- "write", status);
-}
-
/*----------------------------------------------------------------------*/
/*
@@ -579,50 +445,125 @@
static void twl4030_sih_mask(struct irq_data *data)
{
- struct sih_agent *sih = irq_data_get_irq_chip_data(data);
- unsigned long flags;
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
- spin_lock_irqsave(&sih_agent_lock, flags);
- sih->imr |= BIT(data->irq - sih->irq_base);
- sih->imr_change_pending = true;
- queue_work(wq, &sih->mask_work);
- spin_unlock_irqrestore(&sih_agent_lock, flags);
+ agent->imr |= BIT(data->irq - agent->irq_base);
+ agent->imr_change_pending = true;
}
static void twl4030_sih_unmask(struct irq_data *data)
{
- struct sih_agent *sih = irq_data_get_irq_chip_data(data);
- unsigned long flags;
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
- spin_lock_irqsave(&sih_agent_lock, flags);
- sih->imr &= ~BIT(data->irq - sih->irq_base);
- sih->imr_change_pending = true;
- queue_work(wq, &sih->mask_work);
- spin_unlock_irqrestore(&sih_agent_lock, flags);
+ agent->imr &= ~BIT(data->irq - agent->irq_base);
+ agent->imr_change_pending = true;
}
static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
{
- struct sih_agent *sih = irq_data_get_irq_chip_data(data);
- unsigned long flags;
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
- spin_lock_irqsave(&sih_agent_lock, flags);
- if (irqd_get_trigger_type(data) != trigger) {
- sih->edge_change |= BIT(data->irq - sih->irq_base);
- queue_work(wq, &sih->edge_work);
- }
- spin_unlock_irqrestore(&sih_agent_lock, flags);
+ if (irqd_get_trigger_type(data) != trigger)
+ agent->edge_change |= BIT(data->irq - agent->irq_base);
+
return 0;
}
+static void twl4030_sih_bus_lock(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&agent->irq_lock);
+}
+
+static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+ const struct sih *sih = agent->sih;
+ int status;
+
+ if (agent->imr_change_pending) {
+ union {
+ u32 word;
+ u8 bytes[4];
+ } imr;
+
+ /* byte[0] gets overwriten as we write ... */
+ imr.word = cpu_to_le32(agent->imr << 8);
+ agent->imr_change_pending = false;
+
+ /* write the whole mask ... simpler than subsetting it */
+ status = twl_i2c_write(sih->module, imr.bytes,
+ sih->mask[irq_line].imr_offset,
+ sih->bytes_ixr);
+ if (status)
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "write", status);
+ }
+
+ if (agent->edge_change) {
+ u32 edge_change;
+ u8 bytes[6];
+
+ edge_change = agent->edge_change;
+ agent->edge_change = 0;
+
+ /*
+ * Read, reserving first byte for write scratch. Yes, this
+ * could be cached for some speedup ... but be careful about
+ * any processor on the other IRQ line, EDR registers are
+ * shared.
+ */
+ status = twl_i2c_read(sih->module, bytes + 1,
+ sih->edr_offset, sih->bytes_edr);
+ if (status) {
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "read", status);
+ return;
+ }
+
+ /* Modify only the bits we know must change */
+ while (edge_change) {
+ int i = fls(edge_change) - 1;
+ struct irq_data *idata;
+ int byte = 1 + (i >> 2);
+ int off = (i & 0x3) * 2;
+ unsigned int type;
+
+ idata = irq_get_irq_data(i + agent->irq_base);
+
+ bytes[byte] &= ~(0x03 << off);
+
+ type = irqd_get_trigger_type(idata);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ bytes[byte] |= BIT(off + 1);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ bytes[byte] |= BIT(off + 0);
+
+ edge_change &= ~BIT(i);
+ }
+
+ /* Write */
+ status = twl_i2c_write(sih->module, bytes,
+ sih->edr_offset, sih->bytes_edr);
+ if (status)
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "write", status);
+ }
+
+ mutex_unlock(&agent->irq_lock);
+}
+
static struct irq_chip twl4030_sih_irq_chip = {
.name = "twl4030",
- .irq_mask = twl4030_sih_mask,
+ .irq_mask = twl4030_sih_mask,
.irq_unmask = twl4030_sih_unmask,
.irq_set_type = twl4030_sih_set_type,
+ .irq_bus_lock = twl4030_sih_bus_lock,
+ .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
};
/*----------------------------------------------------------------------*/
@@ -655,9 +596,7 @@
int isr;
/* reading ISR acks the IRQs, using clear-on-read mode */
- local_irq_enable();
isr = sih_read_isr(sih);
- local_irq_disable();
if (isr < 0) {
pr_err("twl4030: %s SIH, read ISR error %d\n",
@@ -672,7 +611,7 @@
isr &= ~BIT(irq);
if (irq < sih->bits)
- generic_handle_irq(agent->irq_base + irq);
+ handle_nested_irq(agent->irq_base + irq);
else
pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
sih->name, irq);
@@ -718,15 +657,14 @@
agent->irq_base = irq_base;
agent->sih = sih;
agent->imr = ~0;
- INIT_WORK(&agent->mask_work, twl4030_sih_do_mask);
- INIT_WORK(&agent->edge_work, twl4030_sih_do_edge);
+ mutex_init(&agent->irq_lock);
for (i = 0; i < sih->bits; i++) {
irq = irq_base + i;
+ irq_set_chip_data(irq, agent);
irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
handle_edge_irq);
- irq_set_chip_data(irq, agent);
activate_irq(irq);
}
@@ -758,7 +696,6 @@
int status;
int i;
- struct task_struct *task;
/*
* Mask and clear all TWL4030 interrupts since initially we do
@@ -768,12 +705,6 @@
if (status < 0)
return status;
- wq = create_singlethread_workqueue("twl4030-irqchip");
- if (!wq) {
- pr_err("twl4030: workqueue FAIL\n");
- return -ESRCH;
- }
-
twl4030_irq_base = irq_base;
/* install an irq handler for each of the SIH modules;
@@ -787,6 +718,7 @@
for (i = irq_base; i < irq_end; i++) {
irq_set_chip_and_handler(i, &twl4030_irq_chip,
handle_simple_irq);
+ irq_set_nested_thread(i, 1);
activate_irq(i);
}
twl4030_irq_next = i;
@@ -801,34 +733,22 @@
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
-
-
- init_completion(&irq_event);
-
- status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
- "TWL4030-PIH", &irq_event);
+ status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 0,
+ "TWL4030-PIH", NULL);
if (status < 0) {
pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
goto fail_rqirq;
}
- task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
- "twl4030-irq");
- if (IS_ERR(task)) {
- pr_err("twl4030: could not create irq %d thread!\n", irq_num);
- status = PTR_ERR(task);
- goto fail_kthread;
- }
return status;
-fail_kthread:
- free_irq(irq_num, &irq_event);
fail_rqirq:
/* clean up twl4030_sih_setup */
fail:
- for (i = irq_base; i < irq_end; i++)
+ for (i = irq_base; i < irq_end; i++) {
+ irq_set_nested_thread(i, 0);
irq_set_chip_and_handler(i, NULL, NULL);
- destroy_workqueue(wq);
- wq = NULL;
+ }
+
return status;
}
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 7cbf2aa..834f824 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -740,6 +740,28 @@
TWL4030_BCI_BCICTL1);
goto err_i2c;
}
+
+ /* Check that MADC clock is on */
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, ®val, TWL4030_REG_GPBR1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to read reg GPBR1 0x%X\n",
+ TWL4030_REG_GPBR1);
+ goto err_i2c;
+ }
+
+ /* If MADC clk is not on, turn it on */
+ if (!(regval & TWL4030_GPBR1_MADC_HFCLK_EN)) {
+ dev_info(&pdev->dev, "clk disabled, enabling\n");
+ regval |= TWL4030_GPBR1_MADC_HFCLK_EN;
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, regval,
+ TWL4030_REG_GPBR1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to write reg GPBR1 0x%X\n",
+ TWL4030_REG_GPBR1);
+ goto err_i2c;
+ }
+ }
+
platform_set_drvdata(pdev, madc);
mutex_init(&madc->lock);
ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL,
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index eb3b5f8..deec3ec 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -37,6 +37,7 @@
#include <linux/kthread.h>
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
+#include <linux/suspend.h>
#include "twl-core.h"
@@ -83,8 +84,48 @@
/*----------------------------------------------------------------------*/
static unsigned twl6030_irq_base;
+static int twl_irq;
+static bool twl_irq_wake_enabled;
static struct completion irq_event;
+static atomic_t twl6030_wakeirqs = ATOMIC_INIT(0);
+
+static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *unused)
+{
+ int chained_wakeups;
+
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ chained_wakeups = atomic_read(&twl6030_wakeirqs);
+
+ if (chained_wakeups && !twl_irq_wake_enabled) {
+ if (enable_irq_wake(twl_irq))
+ pr_err("twl6030 IRQ wake enable failed\n");
+ else
+ twl_irq_wake_enabled = true;
+ } else if (!chained_wakeups && twl_irq_wake_enabled) {
+ disable_irq_wake(twl_irq);
+ twl_irq_wake_enabled = false;
+ }
+
+ disable_irq(twl_irq);
+ break;
+
+ case PM_POST_SUSPEND:
+ enable_irq(twl_irq);
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block twl6030_irq_pm_notifier_block = {
+ .notifier_call = twl6030_irq_pm_notifier,
+};
/*
* This thread processes interrupts reported by the Primary Interrupt Handler.
@@ -187,6 +228,16 @@
#endif
}
+int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ if (on)
+ atomic_inc(&twl6030_wakeirqs);
+ else
+ atomic_dec(&twl6030_wakeirqs);
+
+ return 0;
+}
+
/*----------------------------------------------------------------------*/
static unsigned twl6030_irq_next;
@@ -318,10 +369,12 @@
twl6030_irq_chip = dummy_irq_chip;
twl6030_irq_chip.name = "twl6030";
twl6030_irq_chip.irq_set_type = NULL;
+ twl6030_irq_chip.irq_set_wake = twl6030_irq_set_wake;
for (i = irq_base; i < irq_end; i++) {
irq_set_chip_and_handler(i, &twl6030_irq_chip,
handle_simple_irq);
+ irq_set_chip_data(i, (void *)irq_num);
activate_irq(i);
}
@@ -331,6 +384,14 @@
/* install an irq handler to demultiplex the TWL6030 interrupt */
init_completion(&irq_event);
+
+ status = request_irq(irq_num, handle_twl6030_pih, 0,
+ "TWL6030-PIH", &irq_event);
+ if (status < 0) {
+ pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
+ goto fail_irq;
+ }
+
task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
if (IS_ERR(task)) {
pr_err("twl6030: could not create irq %d thread!\n", irq_num);
@@ -338,17 +399,14 @@
goto fail_kthread;
}
- status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED,
- "TWL6030-PIH", &irq_event);
- if (status < 0) {
- pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
- goto fail_irq;
- }
+ twl_irq = irq_num;
+ register_pm_notifier(&twl6030_irq_pm_notifier_block);
return status;
-fail_irq:
- free_irq(irq_num, &irq_event);
fail_kthread:
+ free_irq(irq_num, &irq_event);
+
+fail_irq:
for (i = irq_base; i < irq_end; i++)
irq_set_chip_and_handler(i, NULL, NULL);
return status;
@@ -356,6 +414,7 @@
int twl6030_exit_irq(void)
{
+ unregister_pm_notifier(&twl6030_irq_pm_notifier_block);
if (twl6030_irq_base) {
pr_err("twl6030: can't yet clean up IRQs?\n");
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 24d436c..268f80f 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -34,7 +34,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
-static struct platform_device *twl6040_dev;
+#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
{
@@ -42,10 +42,16 @@
u8 val = 0;
mutex_lock(&twl6040->io_mutex);
- ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
- if (ret < 0) {
- mutex_unlock(&twl6040->io_mutex);
- return ret;
+ /* Vibra control registers from cache */
+ if (unlikely(reg == TWL6040_REG_VIBCTLL ||
+ reg == TWL6040_REG_VIBCTLR)) {
+ val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
+ } else {
+ ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
+ if (ret < 0) {
+ mutex_unlock(&twl6040->io_mutex);
+ return ret;
+ }
}
mutex_unlock(&twl6040->io_mutex);
@@ -59,6 +65,9 @@
mutex_lock(&twl6040->io_mutex);
ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
+ /* Cache the vibra control registers */
+ if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
+ twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
mutex_unlock(&twl6040->io_mutex);
return ret;
@@ -203,11 +212,11 @@
if (intid & TWL6040_THINT) {
status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
if (status & TWL6040_TSHUTDET) {
- dev_warn(&twl6040_dev->dev,
+ dev_warn(twl6040->dev,
"Thermal shutdown, powering-off");
twl6040_power(twl6040, 0);
} else {
- dev_warn(&twl6040_dev->dev,
+ dev_warn(twl6040->dev,
"Leaving thermal shutdown, powering-on");
twl6040_power(twl6040, 1);
}
@@ -227,7 +236,7 @@
if (!time_left) {
intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
if (!(intid & TWL6040_READYINT)) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"timeout waiting for READYINT\n");
return -ETIMEDOUT;
}
@@ -255,7 +264,7 @@
/* wait for power-up completion */
ret = twl6040_power_up_completion(twl6040, naudint);
if (ret) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"automatic power-down failed\n");
twl6040->power_count = 0;
goto out;
@@ -264,7 +273,7 @@
/* use manual power-up sequence */
ret = twl6040_power_up(twl6040);
if (ret) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"manual power-up failed\n");
twl6040->power_count = 0;
goto out;
@@ -276,7 +285,7 @@
} else {
/* already powered-down */
if (!twl6040->power_count) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"device is already powered-off\n");
ret = -EPERM;
goto out;
@@ -326,7 +335,7 @@
lppllctl &= ~TWL6040_LPLLFIN;
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_out %d not supported\n", freq_out);
ret = -EINVAL;
goto pll_out;
@@ -347,7 +356,7 @@
hppllctl);
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_in %d not supported\n", freq_in);
ret = -EINVAL;
goto pll_out;
@@ -356,7 +365,7 @@
case TWL6040_SYSCLK_SEL_HPPLL:
/* high-performance PLL can provide only 19.2 MHz */
if (freq_out != 19200000) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_out %d not supported\n", freq_out);
ret = -EINVAL;
goto pll_out;
@@ -389,7 +398,7 @@
TWL6040_HPLLENA;
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_in %d not supported\n", freq_in);
ret = -EINVAL;
goto pll_out;
@@ -406,7 +415,7 @@
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
break;
default:
- dev_err(&twl6040_dev->dev, "unknown pll id %d\n", pll_id);
+ dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
ret = -EINVAL;
goto pll_out;
}
@@ -435,6 +444,18 @@
}
EXPORT_SYMBOL(twl6040_get_sysclk);
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040)
+{
+ u8 status;
+
+ status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
+ status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
+
+ return status;
+}
+EXPORT_SYMBOL(twl6040_get_vibralr_status);
+
static struct resource twl6040_vibra_rsrc[] = {
{
.flags = IORESOURCE_IRQ,
@@ -471,9 +492,7 @@
platform_set_drvdata(pdev, twl6040);
- twl6040_dev = pdev;
twl6040->dev = &pdev->dev;
- twl6040->audpwron = pdata->audpwron_gpio;
twl6040->irq = pdata->naudint_irq;
twl6040->irq_base = pdata->irq_base;
@@ -483,6 +502,12 @@
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+ /* ERRATA: Automatic power-up is not possible in ES1.0 */
+ if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
+ twl6040->audpwron = pdata->audpwron_gpio;
+ else
+ twl6040->audpwron = -EINVAL;
+
if (gpio_is_valid(twl6040->audpwron)) {
ret = gpio_request(twl6040->audpwron, "audpwron");
if (ret)
@@ -493,10 +518,6 @@
goto gpio2_err;
}
- /* ERRATA: Automatic power-up is not possible in ES1.0 */
- if (twl6040->rev == TWL6040_REV_ES1_0)
- twl6040->audpwron = -EINVAL;
-
/* codec interrupt */
ret = twl6040_irq_init(twl6040);
if (ret)
@@ -566,7 +587,6 @@
gpio1_err:
platform_set_drvdata(pdev, NULL);
kfree(twl6040);
- twl6040_dev = NULL;
return ret;
}
@@ -586,7 +606,6 @@
mfd_remove_devices(&pdev->dev);
platform_set_drvdata(pdev, NULL);
kfree(twl6040);
- twl6040_dev = NULL;
return 0;
}
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index ada1835..f4747a4 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -420,12 +420,19 @@
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
+ wm831x->gpio_level[irq] = false;
break;
case IRQ_TYPE_EDGE_RISING:
wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+ wm831x->gpio_level[irq] = false;
break;
case IRQ_TYPE_EDGE_FALLING:
wm831x->gpio_update[irq] = 0x10000;
+ wm831x->gpio_level[irq] = false;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+ wm831x->gpio_level[irq] = true;
break;
default:
return -EINVAL;
@@ -449,7 +456,7 @@
{
struct wm831x *wm831x = data;
unsigned int i;
- int primary, status_addr;
+ int primary, status_addr, ret;
int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
int read[WM831X_NUM_IRQ_REGS] = { 0 };
int *status;
@@ -507,6 +514,19 @@
if (*status & wm831x_irqs[i].mask)
handle_nested_irq(wm831x->irq_base + i);
+
+ /* Simulate an edge triggered IRQ by polling the input
+ * status. This is sucky but improves interoperability.
+ */
+ if (primary == WM831X_GP_INT &&
+ wm831x->gpio_level[i - WM831X_IRQ_GPIO_1]) {
+ ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+ while (ret & 1 << (i - WM831X_IRQ_GPIO_1)) {
+ handle_nested_irq(wm831x->irq_base + i);
+ ret = wm831x_reg_read(wm831x,
+ WM831X_GPIO_LEVEL);
+ }
+ }
}
out:
@@ -596,8 +616,6 @@
"No interrupt specified - functionality limited\n");
}
-
-
/* Enable top level interrupts, we mask at secondary level */
wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index bfde4e8..5d6ba13 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -167,6 +167,18 @@
* and should be handled via the standard regulator API supply
* management.
*/
+static const char *wm1811_main_supplies[] = {
+ "DBVDD1",
+ "DBVDD2",
+ "DBVDD3",
+ "DCVDD",
+ "AVDD1",
+ "AVDD2",
+ "CPVDD",
+ "SPKVDD1",
+ "SPKVDD2",
+};
+
static const char *wm8994_main_supplies[] = {
"DBVDD",
"DCVDD",
@@ -205,6 +217,47 @@
return 0;
}
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
+ WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
+ WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
+ WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
+ WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
+ switch (wm8994->type) {
+ case WM8958:
+ ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & WM8958_MICD_ENA) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable LDO pulldowns while the device is suspended if we
+ * don't know that something will be driving them. */
+ if (!wm8994->ldo_ena_always_driven)
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
+
/* GPIO configuration state is saved here since we may be configuring
* the GPIO alternate functions even if we're not using the gpiolib
* driver for them.
@@ -274,6 +327,11 @@
if (ret < 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+ /* Disable LDO pulldowns while the device is active */
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ 0);
+
wm8994->suspended = false;
return 0;
@@ -329,6 +387,9 @@
}
switch (wm8994->type) {
+ case WM1811:
+ wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
+ break;
case WM8994:
wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
break;
@@ -349,6 +410,10 @@
}
switch (wm8994->type) {
+ case WM1811:
+ for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
+ wm8994->supplies[i].supply = wm1811_main_supplies[i];
+ break;
case WM8994:
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
wm8994->supplies[i].supply = wm8994_main_supplies[i];
@@ -382,6 +447,13 @@
goto err_enable;
}
switch (ret) {
+ case 0x1811:
+ devname = "WM1811";
+ if (wm8994->type != WM1811)
+ dev_warn(wm8994->dev, "Device registered as type %d\n",
+ wm8994->type);
+ wm8994->type = WM1811;
+ break;
case 0x8994:
devname = "WM8994";
if (wm8994->type != WM8994)
@@ -441,8 +513,15 @@
pdata->gpio_defaults[i]);
}
}
+
+ wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
}
+ /* Disable LDO pulldowns while the device is active */
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ 0);
+
/* In some system designs where the regulators are not in use,
* we can achieve a small reduction in leakage currents by
* floating LDO outputs. This bit makes no difference if the
@@ -539,6 +618,7 @@
}
static const struct i2c_device_id wm8994_i2c_id[] = {
+ { "wm1811", WM1811 },
{ "wm8994", WM8994 },
{ "wm8958", WM8958 },
{ }
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2d6423c..d593878 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -63,7 +63,7 @@
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
- depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
+ depends on HAVE_CLK
help
This option enables device driver support for the PWM channels
on certain Atmel processors. Pulse Width Modulation is used for
@@ -506,5 +506,6 @@
source "drivers/misc/ti-st/Kconfig"
source "drivers/misc/lis3lv02d/Kconfig"
source "drivers/misc/carma/Kconfig"
+source "drivers/misc/altera-stapl/Kconfig"
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 8f3efb6..b26495a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -47,3 +47,4 @@
obj-y += lis3lv02d/
obj-y += carma/
obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
+obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/
diff --git a/drivers/misc/ad525x_dpot-i2c.c b/drivers/misc/ad525x_dpot-i2c.c
index 4ff73c21..a39e055 100644
--- a/drivers/misc/ad525x_dpot-i2c.c
+++ b/drivers/misc/ad525x_dpot-i2c.c
@@ -98,6 +98,7 @@
{"ad5282", AD5282_ID},
{"adn2860", ADN2860_ID},
{"ad5273", AD5273_ID},
+ {"ad5161", AD5161_ID},
{"ad5171", AD5171_ID},
{"ad5170", AD5170_ID},
{"ad5172", AD5172_ID},
diff --git a/drivers/misc/altera-stapl/Kconfig b/drivers/misc/altera-stapl/Kconfig
new file mode 100644
index 0000000..7f01d8e
--- /dev/null
+++ b/drivers/misc/altera-stapl/Kconfig
@@ -0,0 +1,8 @@
+comment "Altera FPGA firmware download module"
+
+config ALTERA_STAPL
+ tristate "Altera FPGA firmware download module"
+ depends on I2C
+ default n
+ help
+ An Altera FPGA module. Say Y when you want to support this tool.
diff --git a/drivers/misc/altera-stapl/Makefile b/drivers/misc/altera-stapl/Makefile
new file mode 100644
index 0000000..055f61ee
--- /dev/null
+++ b/drivers/misc/altera-stapl/Makefile
@@ -0,0 +1,3 @@
+altera-stapl-objs = altera-lpt.o altera-jtag.o altera-comp.o altera.o
+
+obj-$(CONFIG_ALTERA_STAPL) += altera-stapl.o
diff --git a/drivers/staging/altera-stapl/altera-comp.c b/drivers/misc/altera-stapl/altera-comp.c
similarity index 100%
rename from drivers/staging/altera-stapl/altera-comp.c
rename to drivers/misc/altera-stapl/altera-comp.c
diff --git a/drivers/staging/altera-stapl/altera-exprt.h b/drivers/misc/altera-stapl/altera-exprt.h
similarity index 100%
rename from drivers/staging/altera-stapl/altera-exprt.h
rename to drivers/misc/altera-stapl/altera-exprt.h
diff --git a/drivers/misc/altera-stapl/altera-jtag.c b/drivers/misc/altera-stapl/altera-jtag.c
new file mode 100644
index 0000000..f4bf200
--- /dev/null
+++ b/drivers/misc/altera-stapl/altera-jtag.c
@@ -0,0 +1,1021 @@
+/*
+ * altera-jtag.c
+ *
+ * altera FPGA driver
+ *
+ * Copyright (C) Altera Corporation 1998-2001
+ * Copyright (C) 2010 NetUP Inc.
+ * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <misc/altera.h>
+#include "altera-exprt.h"
+#include "altera-jtag.h"
+
+#define alt_jtag_io(a, b, c)\
+ astate->config->jtag_io(astate->config->dev, a, b, c);
+
+#define alt_malloc(a) kzalloc(a, GFP_KERNEL);
+
+/*
+ * This structure shows, for each JTAG state, which state is reached after
+ * a single TCK clock cycle with TMS high or TMS low, respectively. This
+ * describes all possible state transitions in the JTAG state machine.
+ */
+struct altera_jtag_machine {
+ enum altera_jtag_state tms_high;
+ enum altera_jtag_state tms_low;
+};
+
+static const struct altera_jtag_machine altera_transitions[] = {
+ /* RESET */ { RESET, IDLE },
+ /* IDLE */ { DRSELECT, IDLE },
+ /* DRSELECT */ { IRSELECT, DRCAPTURE },
+ /* DRCAPTURE */ { DREXIT1, DRSHIFT },
+ /* DRSHIFT */ { DREXIT1, DRSHIFT },
+ /* DREXIT1 */ { DRUPDATE, DRPAUSE },
+ /* DRPAUSE */ { DREXIT2, DRPAUSE },
+ /* DREXIT2 */ { DRUPDATE, DRSHIFT },
+ /* DRUPDATE */ { DRSELECT, IDLE },
+ /* IRSELECT */ { RESET, IRCAPTURE },
+ /* IRCAPTURE */ { IREXIT1, IRSHIFT },
+ /* IRSHIFT */ { IREXIT1, IRSHIFT },
+ /* IREXIT1 */ { IRUPDATE, IRPAUSE },
+ /* IRPAUSE */ { IREXIT2, IRPAUSE },
+ /* IREXIT2 */ { IRUPDATE, IRSHIFT },
+ /* IRUPDATE */ { DRSELECT, IDLE }
+};
+
+/*
+ * This table contains the TMS value to be used to take the NEXT STEP on
+ * the path to the desired state. The array index is the current state,
+ * and the bit position is the desired endstate. To find out which state
+ * is used as the intermediate state, look up the TMS value in the
+ * altera_transitions[] table.
+ */
+static const u16 altera_jtag_path_map[16] = {
+ /* RST RTI SDRS CDR SDR E1DR PDR E2DR */
+ 0x0001, 0xFFFD, 0xFE01, 0xFFE7, 0xFFEF, 0xFF0F, 0xFFBF, 0xFFFF,
+ /* UDR SIRS CIR SIR E1IR PIR E2IR UIR */
+ 0xFEFD, 0x0001, 0xF3FF, 0xF7FF, 0x87FF, 0xDFFF, 0xFFFF, 0x7FFD
+};
+
+/* Flag bits for alt_jtag_io() function */
+#define TMS_HIGH 1
+#define TMS_LOW 0
+#define TDI_HIGH 1
+#define TDI_LOW 0
+#define READ_TDO 1
+#define IGNORE_TDO 0
+
+int altera_jinit(struct altera_state *astate)
+{
+ struct altera_jtag *js = &astate->js;
+
+ /* initial JTAG state is unknown */
+ js->jtag_state = ILLEGAL_JTAG_STATE;
+
+ /* initialize to default state */
+ js->drstop_state = IDLE;
+ js->irstop_state = IDLE;
+ js->dr_pre = 0;
+ js->dr_post = 0;
+ js->ir_pre = 0;
+ js->ir_post = 0;
+ js->dr_length = 0;
+ js->ir_length = 0;
+
+ js->dr_pre_data = NULL;
+ js->dr_post_data = NULL;
+ js->ir_pre_data = NULL;
+ js->ir_post_data = NULL;
+ js->dr_buffer = NULL;
+ js->ir_buffer = NULL;
+
+ return 0;
+}
+
+int altera_set_drstop(struct altera_jtag *js, enum altera_jtag_state state)
+{
+ js->drstop_state = state;
+
+ return 0;
+}
+
+int altera_set_irstop(struct altera_jtag *js, enum altera_jtag_state state)
+{
+ js->irstop_state = state;
+
+ return 0;
+}
+
+int altera_set_dr_pre(struct altera_jtag *js,
+ u32 count, u32 start_index,
+ u8 *preamble_data)
+{
+ int status = 0;
+ u32 i;
+ u32 j;
+
+ if (count > js->dr_pre) {
+ kfree(js->dr_pre_data);
+ js->dr_pre_data = (u8 *)alt_malloc((count + 7) >> 3);
+ if (js->dr_pre_data == NULL)
+ status = -ENOMEM;
+ else
+ js->dr_pre = count;
+ } else
+ js->dr_pre = count;
+
+ if (status == 0) {
+ for (i = 0; i < count; ++i) {
+ j = i + start_index;
+
+ if (preamble_data == NULL)
+ js->dr_pre_data[i >> 3] |= (1 << (i & 7));
+ else {
+ if (preamble_data[j >> 3] & (1 << (j & 7)))
+ js->dr_pre_data[i >> 3] |=
+ (1 << (i & 7));
+ else
+ js->dr_pre_data[i >> 3] &=
+ ~(u32)(1 << (i & 7));
+
+ }
+ }
+ }
+
+ return status;
+}
+
+int altera_set_ir_pre(struct altera_jtag *js, u32 count, u32 start_index,
+ u8 *preamble_data)
+{
+ int status = 0;
+ u32 i;
+ u32 j;
+
+ if (count > js->ir_pre) {
+ kfree(js->ir_pre_data);
+ js->ir_pre_data = (u8 *)alt_malloc((count + 7) >> 3);
+ if (js->ir_pre_data == NULL)
+ status = -ENOMEM;
+ else
+ js->ir_pre = count;
+
+ } else
+ js->ir_pre = count;
+
+ if (status == 0) {
+ for (i = 0; i < count; ++i) {
+ j = i + start_index;
+ if (preamble_data == NULL)
+ js->ir_pre_data[i >> 3] |= (1 << (i & 7));
+ else {
+ if (preamble_data[j >> 3] & (1 << (j & 7)))
+ js->ir_pre_data[i >> 3] |=
+ (1 << (i & 7));
+ else
+ js->ir_pre_data[i >> 3] &=
+ ~(u32)(1 << (i & 7));
+
+ }
+ }
+ }
+
+ return status;
+}
+
+int altera_set_dr_post(struct altera_jtag *js, u32 count, u32 start_index,
+ u8 *postamble_data)
+{
+ int status = 0;
+ u32 i;
+ u32 j;
+
+ if (count > js->dr_post) {
+ kfree(js->dr_post_data);
+ js->dr_post_data = (u8 *)alt_malloc((count + 7) >> 3);
+
+ if (js->dr_post_data == NULL)
+ status = -ENOMEM;
+ else
+ js->dr_post = count;
+
+ } else
+ js->dr_post = count;
+
+ if (status == 0) {
+ for (i = 0; i < count; ++i) {
+ j = i + start_index;
+
+ if (postamble_data == NULL)
+ js->dr_post_data[i >> 3] |= (1 << (i & 7));
+ else {
+ if (postamble_data[j >> 3] & (1 << (j & 7)))
+ js->dr_post_data[i >> 3] |=
+ (1 << (i & 7));
+ else
+ js->dr_post_data[i >> 3] &=
+ ~(u32)(1 << (i & 7));
+
+ }
+ }
+ }
+
+ return status;
+}
+
+int altera_set_ir_post(struct altera_jtag *js, u32 count, u32 start_index,
+ u8 *postamble_data)
+{
+ int status = 0;
+ u32 i;
+ u32 j;
+
+ if (count > js->ir_post) {
+ kfree(js->ir_post_data);
+ js->ir_post_data = (u8 *)alt_malloc((count + 7) >> 3);
+ if (js->ir_post_data == NULL)
+ status = -ENOMEM;
+ else
+ js->ir_post = count;
+
+ } else
+ js->ir_post = count;
+
+ if (status != 0)
+ return status;
+
+ for (i = 0; i < count; ++i) {
+ j = i + start_index;
+
+ if (postamble_data == NULL)
+ js->ir_post_data[i >> 3] |= (1 << (i & 7));
+ else {
+ if (postamble_data[j >> 3] & (1 << (j & 7)))
+ js->ir_post_data[i >> 3] |= (1 << (i & 7));
+ else
+ js->ir_post_data[i >> 3] &=
+ ~(u32)(1 << (i & 7));
+
+ }
+ }
+
+ return status;
+}
+
+static void altera_jreset_idle(struct altera_state *astate)
+{
+ struct altera_jtag *js = &astate->js;
+ int i;
+ /* Go to Test Logic Reset (no matter what the starting state may be) */
+ for (i = 0; i < 5; ++i)
+ alt_jtag_io(TMS_HIGH, TDI_LOW, IGNORE_TDO);
+
+ /* Now step to Run Test / Idle */
+ alt_jtag_io(TMS_LOW, TDI_LOW, IGNORE_TDO);
+ js->jtag_state = IDLE;
+}
+
+int altera_goto_jstate(struct altera_state *astate,
+ enum altera_jtag_state state)
+{
+ struct altera_jtag *js = &astate->js;
+ int tms;
+ int count = 0;
+ int status = 0;
+
+ if (js->jtag_state == ILLEGAL_JTAG_STATE)
+ /* initialize JTAG chain to known state */
+ altera_jreset_idle(astate);
+
+ if (js->jtag_state == state) {
+ /*
+ * We are already in the desired state.
+ * If it is a stable state, loop here.
+ * Otherwise do nothing (no clock cycles).
+ */
+ if ((state == IDLE) || (state == DRSHIFT) ||
+ (state == DRPAUSE) || (state == IRSHIFT) ||
+ (state == IRPAUSE)) {
+ alt_jtag_io(TMS_LOW, TDI_LOW, IGNORE_TDO);
+ } else if (state == RESET)
+ alt_jtag_io(TMS_HIGH, TDI_LOW, IGNORE_TDO);
+
+ } else {
+ while ((js->jtag_state != state) && (count < 9)) {
+ /* Get TMS value to take a step toward desired state */
+ tms = (altera_jtag_path_map[js->jtag_state] &
+ (1 << state))
+ ? TMS_HIGH : TMS_LOW;
+
+ /* Take a step */
+ alt_jtag_io(tms, TDI_LOW, IGNORE_TDO);
+
+ if (tms)
+ js->jtag_state =
+ altera_transitions[js->jtag_state].tms_high;
+ else
+ js->jtag_state =
+ altera_transitions[js->jtag_state].tms_low;
+
+ ++count;
+ }
+ }
+
+ if (js->jtag_state != state)
+ status = -EREMOTEIO;
+
+ return status;
+}
+
+int altera_wait_cycles(struct altera_state *astate,
+ s32 cycles,
+ enum altera_jtag_state wait_state)
+{
+ struct altera_jtag *js = &astate->js;
+ int tms;
+ s32 count;
+ int status = 0;
+
+ if (js->jtag_state != wait_state)
+ status = altera_goto_jstate(astate, wait_state);
+
+ if (status == 0) {
+ /*
+ * Set TMS high to loop in RESET state
+ * Set TMS low to loop in any other stable state
+ */
+ tms = (wait_state == RESET) ? TMS_HIGH : TMS_LOW;
+
+ for (count = 0L; count < cycles; count++)
+ alt_jtag_io(tms, TDI_LOW, IGNORE_TDO);
+
+ }
+
+ return status;
+}
+
+int altera_wait_msecs(struct altera_state *astate,
+ s32 microseconds, enum altera_jtag_state wait_state)
+/*
+ * Causes JTAG hardware to sit in the specified stable
+ * state for the specified duration of real time. If
+ * no JTAG operations have been performed yet, then only
+ * a delay is performed. This permits the WAIT USECS
+ * statement to be used in VECTOR programs without causing
+ * any JTAG operations.
+ * Returns 0 for success, else appropriate error code.
+ */
+{
+ struct altera_jtag *js = &astate->js;
+ int status = 0;
+
+ if ((js->jtag_state != ILLEGAL_JTAG_STATE) &&
+ (js->jtag_state != wait_state))
+ status = altera_goto_jstate(astate, wait_state);
+
+ if (status == 0)
+ /* Wait for specified time interval */
+ udelay(microseconds);
+
+ return status;
+}
+
+static void altera_concatenate_data(u8 *buffer,
+ u8 *preamble_data,
+ u32 preamble_count,
+ u8 *target_data,
+ u32 start_index,
+ u32 target_count,
+ u8 *postamble_data,
+ u32 postamble_count)
+/*
+ * Copies preamble data, target data, and postamble data
+ * into one buffer for IR or DR scans.
+ */
+{
+ u32 i, j, k;
+
+ for (i = 0L; i < preamble_count; ++i) {
+ if (preamble_data[i >> 3L] & (1L << (i & 7L)))
+ buffer[i >> 3L] |= (1L << (i & 7L));
+ else
+ buffer[i >> 3L] &= ~(u32)(1L << (i & 7L));
+
+ }
+
+ j = start_index;
+ k = preamble_count + target_count;
+ for (; i < k; ++i, ++j) {
+ if (target_data[j >> 3L] & (1L << (j & 7L)))
+ buffer[i >> 3L] |= (1L << (i & 7L));
+ else
+ buffer[i >> 3L] &= ~(u32)(1L << (i & 7L));
+
+ }
+
+ j = 0L;
+ k = preamble_count + target_count + postamble_count;
+ for (; i < k; ++i, ++j) {
+ if (postamble_data[j >> 3L] & (1L << (j & 7L)))
+ buffer[i >> 3L] |= (1L << (i & 7L));
+ else
+ buffer[i >> 3L] &= ~(u32)(1L << (i & 7L));
+
+ }
+}
+
+static int alt_jtag_drscan(struct altera_state *astate,
+ int start_state,
+ int count,
+ u8 *tdi,
+ u8 *tdo)
+{
+ int i = 0;
+ int tdo_bit = 0;
+ int status = 1;
+
+ /* First go to DRSHIFT state */
+ switch (start_state) {
+ case 0: /* IDLE */
+ alt_jtag_io(1, 0, 0); /* DRSELECT */
+ alt_jtag_io(0, 0, 0); /* DRCAPTURE */
+ alt_jtag_io(0, 0, 0); /* DRSHIFT */
+ break;
+
+ case 1: /* DRPAUSE */
+ alt_jtag_io(1, 0, 0); /* DREXIT2 */
+ alt_jtag_io(1, 0, 0); /* DRUPDATE */
+ alt_jtag_io(1, 0, 0); /* DRSELECT */
+ alt_jtag_io(0, 0, 0); /* DRCAPTURE */
+ alt_jtag_io(0, 0, 0); /* DRSHIFT */
+ break;
+
+ case 2: /* IRPAUSE */
+ alt_jtag_io(1, 0, 0); /* IREXIT2 */
+ alt_jtag_io(1, 0, 0); /* IRUPDATE */
+ alt_jtag_io(1, 0, 0); /* DRSELECT */
+ alt_jtag_io(0, 0, 0); /* DRCAPTURE */
+ alt_jtag_io(0, 0, 0); /* DRSHIFT */
+ break;
+
+ default:
+ status = 0;
+ }
+
+ if (status) {
+ /* loop in the SHIFT-DR state */
+ for (i = 0; i < count; i++) {
+ tdo_bit = alt_jtag_io(
+ (i == count - 1),
+ tdi[i >> 3] & (1 << (i & 7)),
+ (tdo != NULL));
+
+ if (tdo != NULL) {
+ if (tdo_bit)
+ tdo[i >> 3] |= (1 << (i & 7));
+ else
+ tdo[i >> 3] &= ~(u32)(1 << (i & 7));
+
+ }
+ }
+
+ alt_jtag_io(0, 0, 0); /* DRPAUSE */
+ }
+
+ return status;
+}
+
+static int alt_jtag_irscan(struct altera_state *astate,
+ int start_state,
+ int count,
+ u8 *tdi,
+ u8 *tdo)
+{
+ int i = 0;
+ int tdo_bit = 0;
+ int status = 1;
+
+ /* First go to IRSHIFT state */
+ switch (start_state) {
+ case 0: /* IDLE */
+ alt_jtag_io(1, 0, 0); /* DRSELECT */
+ alt_jtag_io(1, 0, 0); /* IRSELECT */
+ alt_jtag_io(0, 0, 0); /* IRCAPTURE */
+ alt_jtag_io(0, 0, 0); /* IRSHIFT */
+ break;
+
+ case 1: /* DRPAUSE */
+ alt_jtag_io(1, 0, 0); /* DREXIT2 */
+ alt_jtag_io(1, 0, 0); /* DRUPDATE */
+ alt_jtag_io(1, 0, 0); /* DRSELECT */
+ alt_jtag_io(1, 0, 0); /* IRSELECT */
+ alt_jtag_io(0, 0, 0); /* IRCAPTURE */
+ alt_jtag_io(0, 0, 0); /* IRSHIFT */
+ break;
+
+ case 2: /* IRPAUSE */
+ alt_jtag_io(1, 0, 0); /* IREXIT2 */
+ alt_jtag_io(1, 0, 0); /* IRUPDATE */
+ alt_jtag_io(1, 0, 0); /* DRSELECT */
+ alt_jtag_io(1, 0, 0); /* IRSELECT */
+ alt_jtag_io(0, 0, 0); /* IRCAPTURE */
+ alt_jtag_io(0, 0, 0); /* IRSHIFT */
+ break;
+
+ default:
+ status = 0;
+ }
+
+ if (status) {
+ /* loop in the SHIFT-IR state */
+ for (i = 0; i < count; i++) {
+ tdo_bit = alt_jtag_io(
+ (i == count - 1),
+ tdi[i >> 3] & (1 << (i & 7)),
+ (tdo != NULL));
+ if (tdo != NULL) {
+ if (tdo_bit)
+ tdo[i >> 3] |= (1 << (i & 7));
+ else
+ tdo[i >> 3] &= ~(u32)(1 << (i & 7));
+
+ }
+ }
+
+ alt_jtag_io(0, 0, 0); /* IRPAUSE */
+ }
+
+ return status;
+}
+
+static void altera_extract_target_data(u8 *buffer,
+ u8 *target_data,
+ u32 start_index,
+ u32 preamble_count,
+ u32 target_count)
+/*
+ * Copies target data from scan buffer, filtering out
+ * preamble and postamble data.
+ */
+{
+ u32 i;
+ u32 j;
+ u32 k;
+
+ j = preamble_count;
+ k = start_index + target_count;
+ for (i = start_index; i < k; ++i, ++j) {
+ if (buffer[j >> 3] & (1 << (j & 7)))
+ target_data[i >> 3] |= (1 << (i & 7));
+ else
+ target_data[i >> 3] &= ~(u32)(1 << (i & 7));
+
+ }
+}
+
+int altera_irscan(struct altera_state *astate,
+ u32 count,
+ u8 *tdi_data,
+ u32 start_index)
+/* Shifts data into instruction register */
+{
+ struct altera_jtag *js = &astate->js;
+ int start_code = 0;
+ u32 alloc_chars = 0;
+ u32 shift_count = js->ir_pre + count + js->ir_post;
+ int status = 0;
+ enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
+
+ switch (js->jtag_state) {
+ case ILLEGAL_JTAG_STATE:
+ case RESET:
+ case IDLE:
+ start_code = 0;
+ start_state = IDLE;
+ break;
+
+ case DRSELECT:
+ case DRCAPTURE:
+ case DRSHIFT:
+ case DREXIT1:
+ case DRPAUSE:
+ case DREXIT2:
+ case DRUPDATE:
+ start_code = 1;
+ start_state = DRPAUSE;
+ break;
+
+ case IRSELECT:
+ case IRCAPTURE:
+ case IRSHIFT:
+ case IREXIT1:
+ case IRPAUSE:
+ case IREXIT2:
+ case IRUPDATE:
+ start_code = 2;
+ start_state = IRPAUSE;
+ break;
+
+ default:
+ status = -EREMOTEIO;
+ break;
+ }
+
+ if (status == 0)
+ if (js->jtag_state != start_state)
+ status = altera_goto_jstate(astate, start_state);
+
+ if (status == 0) {
+ if (shift_count > js->ir_length) {
+ alloc_chars = (shift_count + 7) >> 3;
+ kfree(js->ir_buffer);
+ js->ir_buffer = (u8 *)alt_malloc(alloc_chars);
+ if (js->ir_buffer == NULL)
+ status = -ENOMEM;
+ else
+ js->ir_length = alloc_chars * 8;
+
+ }
+ }
+
+ if (status == 0) {
+ /*
+ * Copy preamble data, IR data,
+ * and postamble data into a buffer
+ */
+ altera_concatenate_data(js->ir_buffer,
+ js->ir_pre_data,
+ js->ir_pre,
+ tdi_data,
+ start_index,
+ count,
+ js->ir_post_data,
+ js->ir_post);
+ /* Do the IRSCAN */
+ alt_jtag_irscan(astate,
+ start_code,
+ shift_count,
+ js->ir_buffer,
+ NULL);
+
+ /* alt_jtag_irscan() always ends in IRPAUSE state */
+ js->jtag_state = IRPAUSE;
+ }
+
+ if (status == 0)
+ if (js->irstop_state != IRPAUSE)
+ status = altera_goto_jstate(astate, js->irstop_state);
+
+
+ return status;
+}
+
+int altera_swap_ir(struct altera_state *astate,
+ u32 count,
+ u8 *in_data,
+ u32 in_index,
+ u8 *out_data,
+ u32 out_index)
+/* Shifts data into instruction register, capturing output data */
+{
+ struct altera_jtag *js = &astate->js;
+ int start_code = 0;
+ u32 alloc_chars = 0;
+ u32 shift_count = js->ir_pre + count + js->ir_post;
+ int status = 0;
+ enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
+
+ switch (js->jtag_state) {
+ case ILLEGAL_JTAG_STATE:
+ case RESET:
+ case IDLE:
+ start_code = 0;
+ start_state = IDLE;
+ break;
+
+ case DRSELECT:
+ case DRCAPTURE:
+ case DRSHIFT:
+ case DREXIT1:
+ case DRPAUSE:
+ case DREXIT2:
+ case DRUPDATE:
+ start_code = 1;
+ start_state = DRPAUSE;
+ break;
+
+ case IRSELECT:
+ case IRCAPTURE:
+ case IRSHIFT:
+ case IREXIT1:
+ case IRPAUSE:
+ case IREXIT2:
+ case IRUPDATE:
+ start_code = 2;
+ start_state = IRPAUSE;
+ break;
+
+ default:
+ status = -EREMOTEIO;
+ break;
+ }
+
+ if (status == 0)
+ if (js->jtag_state != start_state)
+ status = altera_goto_jstate(astate, start_state);
+
+ if (status == 0) {
+ if (shift_count > js->ir_length) {
+ alloc_chars = (shift_count + 7) >> 3;
+ kfree(js->ir_buffer);
+ js->ir_buffer = (u8 *)alt_malloc(alloc_chars);
+ if (js->ir_buffer == NULL)
+ status = -ENOMEM;
+ else
+ js->ir_length = alloc_chars * 8;
+
+ }
+ }
+
+ if (status == 0) {
+ /*
+ * Copy preamble data, IR data,
+ * and postamble data into a buffer
+ */
+ altera_concatenate_data(js->ir_buffer,
+ js->ir_pre_data,
+ js->ir_pre,
+ in_data,
+ in_index,
+ count,
+ js->ir_post_data,
+ js->ir_post);
+
+ /* Do the IRSCAN */
+ alt_jtag_irscan(astate,
+ start_code,
+ shift_count,
+ js->ir_buffer,
+ js->ir_buffer);
+
+ /* alt_jtag_irscan() always ends in IRPAUSE state */
+ js->jtag_state = IRPAUSE;
+ }
+
+ if (status == 0)
+ if (js->irstop_state != IRPAUSE)
+ status = altera_goto_jstate(astate, js->irstop_state);
+
+
+ if (status == 0)
+ /* Now extract the returned data from the buffer */
+ altera_extract_target_data(js->ir_buffer,
+ out_data, out_index,
+ js->ir_pre, count);
+
+ return status;
+}
+
+int altera_drscan(struct altera_state *astate,
+ u32 count,
+ u8 *tdi_data,
+ u32 start_index)
+/* Shifts data into data register (ignoring output data) */
+{
+ struct altera_jtag *js = &astate->js;
+ int start_code = 0;
+ u32 alloc_chars = 0;
+ u32 shift_count = js->dr_pre + count + js->dr_post;
+ int status = 0;
+ enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
+
+ switch (js->jtag_state) {
+ case ILLEGAL_JTAG_STATE:
+ case RESET:
+ case IDLE:
+ start_code = 0;
+ start_state = IDLE;
+ break;
+
+ case DRSELECT:
+ case DRCAPTURE:
+ case DRSHIFT:
+ case DREXIT1:
+ case DRPAUSE:
+ case DREXIT2:
+ case DRUPDATE:
+ start_code = 1;
+ start_state = DRPAUSE;
+ break;
+
+ case IRSELECT:
+ case IRCAPTURE:
+ case IRSHIFT:
+ case IREXIT1:
+ case IRPAUSE:
+ case IREXIT2:
+ case IRUPDATE:
+ start_code = 2;
+ start_state = IRPAUSE;
+ break;
+
+ default:
+ status = -EREMOTEIO;
+ break;
+ }
+
+ if (status == 0)
+ if (js->jtag_state != start_state)
+ status = altera_goto_jstate(astate, start_state);
+
+ if (status == 0) {
+ if (shift_count > js->dr_length) {
+ alloc_chars = (shift_count + 7) >> 3;
+ kfree(js->dr_buffer);
+ js->dr_buffer = (u8 *)alt_malloc(alloc_chars);
+ if (js->dr_buffer == NULL)
+ status = -ENOMEM;
+ else
+ js->dr_length = alloc_chars * 8;
+
+ }
+ }
+
+ if (status == 0) {
+ /*
+ * Copy preamble data, DR data,
+ * and postamble data into a buffer
+ */
+ altera_concatenate_data(js->dr_buffer,
+ js->dr_pre_data,
+ js->dr_pre,
+ tdi_data,
+ start_index,
+ count,
+ js->dr_post_data,
+ js->dr_post);
+ /* Do the DRSCAN */
+ alt_jtag_drscan(astate, start_code, shift_count,
+ js->dr_buffer, NULL);
+ /* alt_jtag_drscan() always ends in DRPAUSE state */
+ js->jtag_state = DRPAUSE;
+ }
+
+ if (status == 0)
+ if (js->drstop_state != DRPAUSE)
+ status = altera_goto_jstate(astate, js->drstop_state);
+
+ return status;
+}
+
+int altera_swap_dr(struct altera_state *astate, u32 count,
+ u8 *in_data, u32 in_index,
+ u8 *out_data, u32 out_index)
+/* Shifts data into data register, capturing output data */
+{
+ struct altera_jtag *js = &astate->js;
+ int start_code = 0;
+ u32 alloc_chars = 0;
+ u32 shift_count = js->dr_pre + count + js->dr_post;
+ int status = 0;
+ enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
+
+ switch (js->jtag_state) {
+ case ILLEGAL_JTAG_STATE:
+ case RESET:
+ case IDLE:
+ start_code = 0;
+ start_state = IDLE;
+ break;
+
+ case DRSELECT:
+ case DRCAPTURE:
+ case DRSHIFT:
+ case DREXIT1:
+ case DRPAUSE:
+ case DREXIT2:
+ case DRUPDATE:
+ start_code = 1;
+ start_state = DRPAUSE;
+ break;
+
+ case IRSELECT:
+ case IRCAPTURE:
+ case IRSHIFT:
+ case IREXIT1:
+ case IRPAUSE:
+ case IREXIT2:
+ case IRUPDATE:
+ start_code = 2;
+ start_state = IRPAUSE;
+ break;
+
+ default:
+ status = -EREMOTEIO;
+ break;
+ }
+
+ if (status == 0)
+ if (js->jtag_state != start_state)
+ status = altera_goto_jstate(astate, start_state);
+
+ if (status == 0) {
+ if (shift_count > js->dr_length) {
+ alloc_chars = (shift_count + 7) >> 3;
+ kfree(js->dr_buffer);
+ js->dr_buffer = (u8 *)alt_malloc(alloc_chars);
+
+ if (js->dr_buffer == NULL)
+ status = -ENOMEM;
+ else
+ js->dr_length = alloc_chars * 8;
+
+ }
+ }
+
+ if (status == 0) {
+ /*
+ * Copy preamble data, DR data,
+ * and postamble data into a buffer
+ */
+ altera_concatenate_data(js->dr_buffer,
+ js->dr_pre_data,
+ js->dr_pre,
+ in_data,
+ in_index,
+ count,
+ js->dr_post_data,
+ js->dr_post);
+
+ /* Do the DRSCAN */
+ alt_jtag_drscan(astate,
+ start_code,
+ shift_count,
+ js->dr_buffer,
+ js->dr_buffer);
+
+ /* alt_jtag_drscan() always ends in DRPAUSE state */
+ js->jtag_state = DRPAUSE;
+ }
+
+ if (status == 0)
+ if (js->drstop_state != DRPAUSE)
+ status = altera_goto_jstate(astate, js->drstop_state);
+
+ if (status == 0)
+ /* Now extract the returned data from the buffer */
+ altera_extract_target_data(js->dr_buffer,
+ out_data,
+ out_index,
+ js->dr_pre,
+ count);
+
+ return status;
+}
+
+void altera_free_buffers(struct altera_state *astate)
+{
+ struct altera_jtag *js = &astate->js;
+ /* If the JTAG interface was used, reset it to TLR */
+ if (js->jtag_state != ILLEGAL_JTAG_STATE)
+ altera_jreset_idle(astate);
+
+ kfree(js->dr_pre_data);
+ js->dr_pre_data = NULL;
+
+ kfree(js->dr_post_data);
+ js->dr_post_data = NULL;
+
+ kfree(js->dr_buffer);
+ js->dr_buffer = NULL;
+
+ kfree(js->ir_pre_data);
+ js->ir_pre_data = NULL;
+
+ kfree(js->ir_post_data);
+ js->ir_post_data = NULL;
+
+ kfree(js->ir_buffer);
+ js->ir_buffer = NULL;
+}
diff --git a/drivers/staging/altera-stapl/altera-jtag.h b/drivers/misc/altera-stapl/altera-jtag.h
similarity index 100%
rename from drivers/staging/altera-stapl/altera-jtag.h
rename to drivers/misc/altera-stapl/altera-jtag.h
diff --git a/drivers/staging/altera-stapl/altera-lpt.c b/drivers/misc/altera-stapl/altera-lpt.c
similarity index 100%
rename from drivers/staging/altera-stapl/altera-lpt.c
rename to drivers/misc/altera-stapl/altera-lpt.c
diff --git a/drivers/misc/altera-stapl/altera.c b/drivers/misc/altera-stapl/altera.c
new file mode 100644
index 0000000..24272e0
--- /dev/null
+++ b/drivers/misc/altera-stapl/altera.c
@@ -0,0 +1,2537 @@
+/*
+ * altera.c
+ *
+ * altera FPGA driver
+ *
+ * Copyright (C) Altera Corporation 1998-2001
+ * Copyright (C) 2010,2011 NetUP Inc.
+ * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/unaligned.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <misc/altera.h>
+#include "altera-exprt.h"
+#include "altera-jtag.h"
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debugging information");
+
+MODULE_DESCRIPTION("altera FPGA kernel module");
+MODULE_AUTHOR("Igor M. Liplianin <liplianin@netup.ru>");
+MODULE_LICENSE("GPL");
+
+#define dprintk(args...) \
+ if (debug) { \
+ printk(KERN_DEBUG args); \
+ }
+
+enum altera_fpga_opcode {
+ OP_NOP = 0,
+ OP_DUP,
+ OP_SWP,
+ OP_ADD,
+ OP_SUB,
+ OP_MULT,
+ OP_DIV,
+ OP_MOD,
+ OP_SHL,
+ OP_SHR,
+ OP_NOT,
+ OP_AND,
+ OP_OR,
+ OP_XOR,
+ OP_INV,
+ OP_GT,
+ OP_LT,
+ OP_RET,
+ OP_CMPS,
+ OP_PINT,
+ OP_PRNT,
+ OP_DSS,
+ OP_DSSC,
+ OP_ISS,
+ OP_ISSC,
+ OP_DPR = 0x1c,
+ OP_DPRL,
+ OP_DPO,
+ OP_DPOL,
+ OP_IPR,
+ OP_IPRL,
+ OP_IPO,
+ OP_IPOL,
+ OP_PCHR,
+ OP_EXIT,
+ OP_EQU,
+ OP_POPT,
+ OP_ABS = 0x2c,
+ OP_BCH0,
+ OP_PSH0 = 0x2f,
+ OP_PSHL = 0x40,
+ OP_PSHV,
+ OP_JMP,
+ OP_CALL,
+ OP_NEXT,
+ OP_PSTR,
+ OP_SINT = 0x47,
+ OP_ST,
+ OP_ISTP,
+ OP_DSTP,
+ OP_SWPN,
+ OP_DUPN,
+ OP_POPV,
+ OP_POPE,
+ OP_POPA,
+ OP_JMPZ,
+ OP_DS,
+ OP_IS,
+ OP_DPRA,
+ OP_DPOA,
+ OP_IPRA,
+ OP_IPOA,
+ OP_EXPT,
+ OP_PSHE,
+ OP_PSHA,
+ OP_DYNA,
+ OP_EXPV = 0x5c,
+ OP_COPY = 0x80,
+ OP_REVA,
+ OP_DSC,
+ OP_ISC,
+ OP_WAIT,
+ OP_VS,
+ OP_CMPA = 0xc0,
+ OP_VSC,
+};
+
+struct altera_procinfo {
+ char *name;
+ u8 attrs;
+ struct altera_procinfo *next;
+};
+
+/* This function checks if enough parameters are available on the stack. */
+static int altera_check_stack(int stack_ptr, int count, int *status)
+{
+ if (stack_ptr < count) {
+ *status = -EOVERFLOW;
+ return 0;
+ }
+
+ return 1;
+}
+
+static void altera_export_int(char *key, s32 value)
+{
+ dprintk("Export: key = \"%s\", value = %d\n", key, value);
+}
+
+#define HEX_LINE_CHARS 72
+#define HEX_LINE_BITS (HEX_LINE_CHARS * 4)
+
+static void altera_export_bool_array(char *key, u8 *data, s32 count)
+{
+ char string[HEX_LINE_CHARS + 1];
+ s32 i, offset;
+ u32 size, line, lines, linebits, value, j, k;
+
+ if (count > HEX_LINE_BITS) {
+ dprintk("Export: key = \"%s\", %d bits, value = HEX\n",
+ key, count);
+ lines = (count + (HEX_LINE_BITS - 1)) / HEX_LINE_BITS;
+
+ for (line = 0; line < lines; ++line) {
+ if (line < (lines - 1)) {
+ linebits = HEX_LINE_BITS;
+ size = HEX_LINE_CHARS;
+ offset = count - ((line + 1) * HEX_LINE_BITS);
+ } else {
+ linebits =
+ count - ((lines - 1) * HEX_LINE_BITS);
+ size = (linebits + 3) / 4;
+ offset = 0L;
+ }
+
+ string[size] = '\0';
+ j = size - 1;
+ value = 0;
+
+ for (k = 0; k < linebits; ++k) {
+ i = k + offset;
+ if (data[i >> 3] & (1 << (i & 7)))
+ value |= (1 << (i & 3));
+ if ((i & 3) == 3) {
+ sprintf(&string[j], "%1x", value);
+ value = 0;
+ --j;
+ }
+ }
+ if ((k & 3) > 0)
+ sprintf(&string[j], "%1x", value);
+
+ dprintk("%s\n", string);
+ }
+
+ } else {
+ size = (count + 3) / 4;
+ string[size] = '\0';
+ j = size - 1;
+ value = 0;
+
+ for (i = 0; i < count; ++i) {
+ if (data[i >> 3] & (1 << (i & 7)))
+ value |= (1 << (i & 3));
+ if ((i & 3) == 3) {
+ sprintf(&string[j], "%1x", value);
+ value = 0;
+ --j;
+ }
+ }
+ if ((i & 3) > 0)
+ sprintf(&string[j], "%1x", value);
+
+ dprintk("Export: key = \"%s\", %d bits, value = HEX %s\n",
+ key, count, string);
+ }
+}
+
+static int altera_execute(struct altera_state *astate,
+ u8 *p,
+ s32 program_size,
+ s32 *error_address,
+ int *exit_code,
+ int *format_version)
+{
+ struct altera_config *aconf = astate->config;
+ char *msg_buff = astate->msg_buff;
+ long *stack = astate->stack;
+ int status = 0;
+ u32 first_word = 0L;
+ u32 action_table = 0L;
+ u32 proc_table = 0L;
+ u32 str_table = 0L;
+ u32 sym_table = 0L;
+ u32 data_sect = 0L;
+ u32 code_sect = 0L;
+ u32 debug_sect = 0L;
+ u32 action_count = 0L;
+ u32 proc_count = 0L;
+ u32 sym_count = 0L;
+ long *vars = NULL;
+ s32 *var_size = NULL;
+ char *attrs = NULL;
+ u8 *proc_attributes = NULL;
+ u32 pc;
+ u32 opcode_address;
+ u32 args[3];
+ u32 opcode;
+ u32 name_id;
+ u8 charbuf[4];
+ long long_tmp;
+ u32 variable_id;
+ u8 *charptr_tmp;
+ u8 *charptr_tmp2;
+ long *longptr_tmp;
+ int version = 0;
+ int delta = 0;
+ int stack_ptr = 0;
+ u32 arg_count;
+ int done = 0;
+ int bad_opcode = 0;
+ u32 count;
+ u32 index;
+ u32 index2;
+ s32 long_count;
+ s32 long_idx;
+ s32 long_idx2;
+ u32 i;
+ u32 j;
+ u32 uncomp_size;
+ u32 offset;
+ u32 value;
+ int current_proc = 0;
+ int reverse;
+
+ char *name;
+
+ dprintk("%s\n", __func__);
+
+ /* Read header information */
+ if (program_size > 52L) {
+ first_word = get_unaligned_be32(&p[0]);
+ version = (first_word & 1L);
+ *format_version = version + 1;
+ delta = version * 8;
+
+ action_table = get_unaligned_be32(&p[4]);
+ proc_table = get_unaligned_be32(&p[8]);
+ str_table = get_unaligned_be32(&p[4 + delta]);
+ sym_table = get_unaligned_be32(&p[16 + delta]);
+ data_sect = get_unaligned_be32(&p[20 + delta]);
+ code_sect = get_unaligned_be32(&p[24 + delta]);
+ debug_sect = get_unaligned_be32(&p[28 + delta]);
+ action_count = get_unaligned_be32(&p[40 + delta]);
+ proc_count = get_unaligned_be32(&p[44 + delta]);
+ sym_count = get_unaligned_be32(&p[48 + (2 * delta)]);
+ }
+
+ if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L)) {
+ done = 1;
+ status = -EIO;
+ goto exit_done;
+ }
+
+ if (sym_count <= 0)
+ goto exit_done;
+
+ vars = kzalloc(sym_count * sizeof(long), GFP_KERNEL);
+
+ if (vars == NULL)
+ status = -ENOMEM;
+
+ if (status == 0) {
+ var_size = kzalloc(sym_count * sizeof(s32), GFP_KERNEL);
+
+ if (var_size == NULL)
+ status = -ENOMEM;
+ }
+
+ if (status == 0) {
+ attrs = kzalloc(sym_count, GFP_KERNEL);
+
+ if (attrs == NULL)
+ status = -ENOMEM;
+ }
+
+ if ((status == 0) && (version > 0)) {
+ proc_attributes = kzalloc(proc_count, GFP_KERNEL);
+
+ if (proc_attributes == NULL)
+ status = -ENOMEM;
+ }
+
+ if (status != 0)
+ goto exit_done;
+
+ delta = version * 2;
+
+ for (i = 0; i < sym_count; ++i) {
+ offset = (sym_table + ((11 + delta) * i));
+
+ value = get_unaligned_be32(&p[offset + 3 + delta]);
+
+ attrs[i] = p[offset];
+
+ /*
+ * use bit 7 of attribute byte to indicate that
+ * this buffer was dynamically allocated
+ * and should be freed later
+ */
+ attrs[i] &= 0x7f;
+
+ var_size[i] = get_unaligned_be32(&p[offset + 7 + delta]);
+
+ /*
+ * Attribute bits:
+ * bit 0: 0 = read-only, 1 = read-write
+ * bit 1: 0 = not compressed, 1 = compressed
+ * bit 2: 0 = not initialized, 1 = initialized
+ * bit 3: 0 = scalar, 1 = array
+ * bit 4: 0 = Boolean, 1 = integer
+ * bit 5: 0 = declared variable,
+ * 1 = compiler created temporary variable
+ */
+
+ if ((attrs[i] & 0x0c) == 0x04)
+ /* initialized scalar variable */
+ vars[i] = value;
+ else if ((attrs[i] & 0x1e) == 0x0e) {
+ /* initialized compressed Boolean array */
+ uncomp_size = get_unaligned_le32(&p[data_sect + value]);
+
+ /* allocate a buffer for the uncompressed data */
+ vars[i] = (long)kzalloc(uncomp_size, GFP_KERNEL);
+ if (vars[i] == 0L)
+ status = -ENOMEM;
+ else {
+ /* set flag so buffer will be freed later */
+ attrs[i] |= 0x80;
+
+ /* uncompress the data */
+ if (altera_shrink(&p[data_sect + value],
+ var_size[i],
+ (u8 *)vars[i],
+ uncomp_size,
+ version) != uncomp_size)
+ /* decompression failed */
+ status = -EIO;
+ else
+ var_size[i] = uncomp_size * 8L;
+
+ }
+ } else if ((attrs[i] & 0x1e) == 0x0c) {
+ /* initialized Boolean array */
+ vars[i] = value + data_sect + (long)p;
+ } else if ((attrs[i] & 0x1c) == 0x1c) {
+ /* initialized integer array */
+ vars[i] = value + data_sect;
+ } else if ((attrs[i] & 0x0c) == 0x08) {
+ /* uninitialized array */
+
+ /* flag attrs so that memory is freed */
+ attrs[i] |= 0x80;
+
+ if (var_size[i] > 0) {
+ u32 size;
+
+ if (attrs[i] & 0x10)
+ /* integer array */
+ size = (var_size[i] * sizeof(s32));
+ else
+ /* Boolean array */
+ size = ((var_size[i] + 7L) / 8L);
+
+ vars[i] = (long)kzalloc(size, GFP_KERNEL);
+
+ if (vars[i] == 0) {
+ status = -ENOMEM;
+ } else {
+ /* zero out memory */
+ for (j = 0; j < size; ++j)
+ ((u8 *)(vars[i]))[j] = 0;
+
+ }
+ } else
+ vars[i] = 0;
+
+ } else
+ vars[i] = 0;
+
+ }
+
+exit_done:
+ if (status != 0)
+ done = 1;
+
+ altera_jinit(astate);
+
+ pc = code_sect;
+ msg_buff[0] = '\0';
+
+ /*
+ * For JBC version 2, we will execute the procedures corresponding to
+ * the selected ACTION
+ */
+ if (version > 0) {
+ if (aconf->action == NULL) {
+ status = -EINVAL;
+ done = 1;
+ } else {
+ int action_found = 0;
+ for (i = 0; (i < action_count) && !action_found; ++i) {
+ name_id = get_unaligned_be32(&p[action_table +
+ (12 * i)]);
+
+ name = &p[str_table + name_id];
+
+ if (strnicmp(aconf->action, name, strlen(name)) == 0) {
+ action_found = 1;
+ current_proc =
+ get_unaligned_be32(&p[action_table +
+ (12 * i) + 8]);
+ }
+ }
+
+ if (!action_found) {
+ status = -EINVAL;
+ done = 1;
+ }
+ }
+
+ if (status == 0) {
+ int first_time = 1;
+ i = current_proc;
+ while ((i != 0) || first_time) {
+ first_time = 0;
+ /* check procedure attribute byte */
+ proc_attributes[i] =
+ (p[proc_table +
+ (13 * i) + 8] &
+ 0x03);
+
+ /*
+ * BIT0 - OPTIONAL
+ * BIT1 - RECOMMENDED
+ * BIT6 - FORCED OFF
+ * BIT7 - FORCED ON
+ */
+
+ i = get_unaligned_be32(&p[proc_table +
+ (13 * i) + 4]);
+ }
+
+ /*
+ * Set current_proc to the first procedure
+ * to be executed
+ */
+ i = current_proc;
+ while ((i != 0) &&
+ ((proc_attributes[i] == 1) ||
+ ((proc_attributes[i] & 0xc0) == 0x40))) {
+ i = get_unaligned_be32(&p[proc_table +
+ (13 * i) + 4]);
+ }
+
+ if ((i != 0) || ((i == 0) && (current_proc == 0) &&
+ ((proc_attributes[0] != 1) &&
+ ((proc_attributes[0] & 0xc0) != 0x40)))) {
+ current_proc = i;
+ pc = code_sect +
+ get_unaligned_be32(&p[proc_table +
+ (13 * i) + 9]);
+ if ((pc < code_sect) || (pc >= debug_sect))
+ status = -ERANGE;
+ } else
+ /* there are no procedures to execute! */
+ done = 1;
+
+ }
+ }
+
+ msg_buff[0] = '\0';
+
+ while (!done) {
+ opcode = (p[pc] & 0xff);
+ opcode_address = pc;
+ ++pc;
+
+ if (debug > 1)
+ printk("opcode: %02x\n", opcode);
+
+ arg_count = (opcode >> 6) & 3;
+ for (i = 0; i < arg_count; ++i) {
+ args[i] = get_unaligned_be32(&p[pc]);
+ pc += 4;
+ }
+
+ switch (opcode) {
+ case OP_NOP:
+ break;
+ case OP_DUP:
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ stack[stack_ptr] = stack[stack_ptr - 1];
+ ++stack_ptr;
+ }
+ break;
+ case OP_SWP:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ long_tmp = stack[stack_ptr - 2];
+ stack[stack_ptr - 2] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+ break;
+ case OP_ADD:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] += stack[stack_ptr];
+ }
+ break;
+ case OP_SUB:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] -= stack[stack_ptr];
+ }
+ break;
+ case OP_MULT:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] *= stack[stack_ptr];
+ }
+ break;
+ case OP_DIV:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] /= stack[stack_ptr];
+ }
+ break;
+ case OP_MOD:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] %= stack[stack_ptr];
+ }
+ break;
+ case OP_SHL:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] <<= stack[stack_ptr];
+ }
+ break;
+ case OP_SHR:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] >>= stack[stack_ptr];
+ }
+ break;
+ case OP_NOT:
+ if (altera_check_stack(stack_ptr, 1, &status))
+ stack[stack_ptr - 1] ^= (-1L);
+
+ break;
+ case OP_AND:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] &= stack[stack_ptr];
+ }
+ break;
+ case OP_OR:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] |= stack[stack_ptr];
+ }
+ break;
+ case OP_XOR:
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ --stack_ptr;
+ stack[stack_ptr - 1] ^= stack[stack_ptr];
+ }
+ break;
+ case OP_INV:
+ if (!altera_check_stack(stack_ptr, 1, &status))
+ break;
+ stack[stack_ptr - 1] = stack[stack_ptr - 1] ? 0L : 1L;
+ break;
+ case OP_GT:
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ --stack_ptr;
+ stack[stack_ptr - 1] =
+ (stack[stack_ptr - 1] > stack[stack_ptr]) ?
+ 1L : 0L;
+
+ break;
+ case OP_LT:
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ --stack_ptr;
+ stack[stack_ptr - 1] =
+ (stack[stack_ptr - 1] < stack[stack_ptr]) ?
+ 1L : 0L;
+
+ break;
+ case OP_RET:
+ if ((version > 0) && (stack_ptr == 0)) {
+ /*
+ * We completed one of the main procedures
+ * of an ACTION.
+ * Find the next procedure
+ * to be executed and jump to it.
+ * If there are no more procedures, then EXIT.
+ */
+ i = get_unaligned_be32(&p[proc_table +
+ (13 * current_proc) + 4]);
+ while ((i != 0) &&
+ ((proc_attributes[i] == 1) ||
+ ((proc_attributes[i] & 0xc0) == 0x40)))
+ i = get_unaligned_be32(&p[proc_table +
+ (13 * i) + 4]);
+
+ if (i == 0) {
+ /* no procedures to execute! */
+ done = 1;
+ *exit_code = 0; /* success */
+ } else {
+ current_proc = i;
+ pc = code_sect + get_unaligned_be32(
+ &p[proc_table +
+ (13 * i) + 9]);
+ if ((pc < code_sect) ||
+ (pc >= debug_sect))
+ status = -ERANGE;
+ }
+
+ } else
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ pc = stack[--stack_ptr] + code_sect;
+ if ((pc <= code_sect) ||
+ (pc >= debug_sect))
+ status = -ERANGE;
+
+ }
+
+ break;
+ case OP_CMPS:
+ /*
+ * Array short compare
+ * ...stack 0 is source 1 value
+ * ...stack 1 is source 2 value
+ * ...stack 2 is mask value
+ * ...stack 3 is count
+ */
+ if (altera_check_stack(stack_ptr, 4, &status)) {
+ s32 a = stack[--stack_ptr];
+ s32 b = stack[--stack_ptr];
+ long_tmp = stack[--stack_ptr];
+ count = stack[stack_ptr - 1];
+
+ if ((count < 1) || (count > 32))
+ status = -ERANGE;
+ else {
+ long_tmp &= ((-1L) >> (32 - count));
+
+ stack[stack_ptr - 1] =
+ ((a & long_tmp) == (b & long_tmp))
+ ? 1L : 0L;
+ }
+ }
+ break;
+ case OP_PINT:
+ /*
+ * PRINT add integer
+ * ...stack 0 is integer value
+ */
+ if (!altera_check_stack(stack_ptr, 1, &status))
+ break;
+ sprintf(&msg_buff[strlen(msg_buff)],
+ "%ld", stack[--stack_ptr]);
+ break;
+ case OP_PRNT:
+ /* PRINT finish */
+ if (debug)
+ printk(msg_buff, "\n");
+
+ msg_buff[0] = '\0';
+ break;
+ case OP_DSS:
+ /*
+ * DRSCAN short
+ * ...stack 0 is scan data
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ long_tmp = stack[--stack_ptr];
+ count = stack[--stack_ptr];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_drscan(astate, count, charbuf, 0);
+ break;
+ case OP_DSSC:
+ /*
+ * DRSCAN short with capture
+ * ...stack 0 is scan data
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ long_tmp = stack[--stack_ptr];
+ count = stack[stack_ptr - 1];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_swap_dr(astate, count, charbuf,
+ 0, charbuf, 0);
+ stack[stack_ptr - 1] = get_unaligned_le32(&charbuf[0]);
+ break;
+ case OP_ISS:
+ /*
+ * IRSCAN short
+ * ...stack 0 is scan data
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ long_tmp = stack[--stack_ptr];
+ count = stack[--stack_ptr];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_irscan(astate, count, charbuf, 0);
+ break;
+ case OP_ISSC:
+ /*
+ * IRSCAN short with capture
+ * ...stack 0 is scan data
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ long_tmp = stack[--stack_ptr];
+ count = stack[stack_ptr - 1];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_swap_ir(astate, count, charbuf,
+ 0, charbuf, 0);
+ stack[stack_ptr - 1] = get_unaligned_le32(&charbuf[0]);
+ break;
+ case OP_DPR:
+ if (!altera_check_stack(stack_ptr, 1, &status))
+ break;
+ count = stack[--stack_ptr];
+ status = altera_set_dr_pre(&astate->js, count, 0, NULL);
+ break;
+ case OP_DPRL:
+ /*
+ * DRPRE with literal data
+ * ...stack 0 is count
+ * ...stack 1 is literal data
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ count = stack[--stack_ptr];
+ long_tmp = stack[--stack_ptr];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_set_dr_pre(&astate->js, count, 0,
+ charbuf);
+ break;
+ case OP_DPO:
+ /*
+ * DRPOST
+ * ...stack 0 is count
+ */
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ count = stack[--stack_ptr];
+ status = altera_set_dr_post(&astate->js, count,
+ 0, NULL);
+ }
+ break;
+ case OP_DPOL:
+ /*
+ * DRPOST with literal data
+ * ...stack 0 is count
+ * ...stack 1 is literal data
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ count = stack[--stack_ptr];
+ long_tmp = stack[--stack_ptr];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_set_dr_post(&astate->js, count, 0,
+ charbuf);
+ break;
+ case OP_IPR:
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ count = stack[--stack_ptr];
+ status = altera_set_ir_pre(&astate->js, count,
+ 0, NULL);
+ }
+ break;
+ case OP_IPRL:
+ /*
+ * IRPRE with literal data
+ * ...stack 0 is count
+ * ...stack 1 is literal data
+ */
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ count = stack[--stack_ptr];
+ long_tmp = stack[--stack_ptr];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_set_ir_pre(&astate->js, count,
+ 0, charbuf);
+ }
+ break;
+ case OP_IPO:
+ /*
+ * IRPOST
+ * ...stack 0 is count
+ */
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ count = stack[--stack_ptr];
+ status = altera_set_ir_post(&astate->js, count,
+ 0, NULL);
+ }
+ break;
+ case OP_IPOL:
+ /*
+ * IRPOST with literal data
+ * ...stack 0 is count
+ * ...stack 1 is literal data
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ count = stack[--stack_ptr];
+ long_tmp = stack[--stack_ptr];
+ put_unaligned_le32(long_tmp, &charbuf[0]);
+ status = altera_set_ir_post(&astate->js, count, 0,
+ charbuf);
+ break;
+ case OP_PCHR:
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ u8 ch;
+ count = strlen(msg_buff);
+ ch = (char) stack[--stack_ptr];
+ if ((ch < 1) || (ch > 127)) {
+ /*
+ * character code out of range
+ * instead of flagging an error,
+ * force the value to 127
+ */
+ ch = 127;
+ }
+ msg_buff[count] = ch;
+ msg_buff[count + 1] = '\0';
+ }
+ break;
+ case OP_EXIT:
+ if (altera_check_stack(stack_ptr, 1, &status))
+ *exit_code = stack[--stack_ptr];
+
+ done = 1;
+ break;
+ case OP_EQU:
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ --stack_ptr;
+ stack[stack_ptr - 1] =
+ (stack[stack_ptr - 1] == stack[stack_ptr]) ?
+ 1L : 0L;
+ break;
+ case OP_POPT:
+ if (altera_check_stack(stack_ptr, 1, &status))
+ --stack_ptr;
+
+ break;
+ case OP_ABS:
+ if (!altera_check_stack(stack_ptr, 1, &status))
+ break;
+ if (stack[stack_ptr - 1] < 0)
+ stack[stack_ptr - 1] = 0 - stack[stack_ptr - 1];
+
+ break;
+ case OP_BCH0:
+ /*
+ * Batch operation 0
+ * SWP
+ * SWPN 7
+ * SWP
+ * SWPN 6
+ * DUPN 8
+ * SWPN 2
+ * SWP
+ * DUPN 6
+ * DUPN 6
+ */
+
+ /* SWP */
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ long_tmp = stack[stack_ptr - 2];
+ stack[stack_ptr - 2] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+
+ /* SWPN 7 */
+ index = 7 + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ long_tmp = stack[stack_ptr - index];
+ stack[stack_ptr - index] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+
+ /* SWP */
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ long_tmp = stack[stack_ptr - 2];
+ stack[stack_ptr - 2] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+
+ /* SWPN 6 */
+ index = 6 + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ long_tmp = stack[stack_ptr - index];
+ stack[stack_ptr - index] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+
+ /* DUPN 8 */
+ index = 8 + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ stack[stack_ptr] = stack[stack_ptr - index];
+ ++stack_ptr;
+ }
+
+ /* SWPN 2 */
+ index = 2 + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ long_tmp = stack[stack_ptr - index];
+ stack[stack_ptr - index] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+
+ /* SWP */
+ if (altera_check_stack(stack_ptr, 2, &status)) {
+ long_tmp = stack[stack_ptr - 2];
+ stack[stack_ptr - 2] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+
+ /* DUPN 6 */
+ index = 6 + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ stack[stack_ptr] = stack[stack_ptr - index];
+ ++stack_ptr;
+ }
+
+ /* DUPN 6 */
+ index = 6 + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ stack[stack_ptr] = stack[stack_ptr - index];
+ ++stack_ptr;
+ }
+ break;
+ case OP_PSH0:
+ stack[stack_ptr++] = 0;
+ break;
+ case OP_PSHL:
+ stack[stack_ptr++] = (s32) args[0];
+ break;
+ case OP_PSHV:
+ stack[stack_ptr++] = vars[args[0]];
+ break;
+ case OP_JMP:
+ pc = args[0] + code_sect;
+ if ((pc < code_sect) || (pc >= debug_sect))
+ status = -ERANGE;
+ break;
+ case OP_CALL:
+ stack[stack_ptr++] = pc;
+ pc = args[0] + code_sect;
+ if ((pc < code_sect) || (pc >= debug_sect))
+ status = -ERANGE;
+ break;
+ case OP_NEXT:
+ /*
+ * Process FOR / NEXT loop
+ * ...argument 0 is variable ID
+ * ...stack 0 is step value
+ * ...stack 1 is end value
+ * ...stack 2 is top address
+ */
+ if (altera_check_stack(stack_ptr, 3, &status)) {
+ s32 step = stack[stack_ptr - 1];
+ s32 end = stack[stack_ptr - 2];
+ s32 top = stack[stack_ptr - 3];
+ s32 iterator = vars[args[0]];
+ int break_out = 0;
+
+ if (step < 0) {
+ if (iterator <= end)
+ break_out = 1;
+ } else if (iterator >= end)
+ break_out = 1;
+
+ if (break_out) {
+ stack_ptr -= 3;
+ } else {
+ vars[args[0]] = iterator + step;
+ pc = top + code_sect;
+ if ((pc < code_sect) ||
+ (pc >= debug_sect))
+ status = -ERANGE;
+ }
+ }
+ break;
+ case OP_PSTR:
+ /*
+ * PRINT add string
+ * ...argument 0 is string ID
+ */
+ count = strlen(msg_buff);
+ strlcpy(&msg_buff[count],
+ &p[str_table + args[0]],
+ ALTERA_MESSAGE_LENGTH - count);
+ break;
+ case OP_SINT:
+ /*
+ * STATE intermediate state
+ * ...argument 0 is state code
+ */
+ status = altera_goto_jstate(astate, args[0]);
+ break;
+ case OP_ST:
+ /*
+ * STATE final state
+ * ...argument 0 is state code
+ */
+ status = altera_goto_jstate(astate, args[0]);
+ break;
+ case OP_ISTP:
+ /*
+ * IRSTOP state
+ * ...argument 0 is state code
+ */
+ status = altera_set_irstop(&astate->js, args[0]);
+ break;
+ case OP_DSTP:
+ /*
+ * DRSTOP state
+ * ...argument 0 is state code
+ */
+ status = altera_set_drstop(&astate->js, args[0]);
+ break;
+
+ case OP_SWPN:
+ /*
+ * Exchange top with Nth stack value
+ * ...argument 0 is 0-based stack entry
+ * to swap with top element
+ */
+ index = (args[0]) + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ long_tmp = stack[stack_ptr - index];
+ stack[stack_ptr - index] = stack[stack_ptr - 1];
+ stack[stack_ptr - 1] = long_tmp;
+ }
+ break;
+ case OP_DUPN:
+ /*
+ * Duplicate Nth stack value
+ * ...argument 0 is 0-based stack entry to duplicate
+ */
+ index = (args[0]) + 1;
+ if (altera_check_stack(stack_ptr, index, &status)) {
+ stack[stack_ptr] = stack[stack_ptr - index];
+ ++stack_ptr;
+ }
+ break;
+ case OP_POPV:
+ /*
+ * Pop stack into scalar variable
+ * ...argument 0 is variable ID
+ * ...stack 0 is value
+ */
+ if (altera_check_stack(stack_ptr, 1, &status))
+ vars[args[0]] = stack[--stack_ptr];
+
+ break;
+ case OP_POPE:
+ /*
+ * Pop stack into integer array element
+ * ...argument 0 is variable ID
+ * ...stack 0 is array index
+ * ...stack 1 is value
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ variable_id = args[0];
+
+ /*
+ * If variable is read-only,
+ * convert to writable array
+ */
+ if ((version > 0) &&
+ ((attrs[variable_id] & 0x9c) == 0x1c)) {
+ /* Allocate a writable buffer for this array */
+ count = var_size[variable_id];
+ long_tmp = vars[variable_id];
+ longptr_tmp = kzalloc(count * sizeof(long),
+ GFP_KERNEL);
+ vars[variable_id] = (long)longptr_tmp;
+
+ if (vars[variable_id] == 0) {
+ status = -ENOMEM;
+ break;
+ }
+
+ /* copy previous contents into buffer */
+ for (i = 0; i < count; ++i) {
+ longptr_tmp[i] =
+ get_unaligned_be32(&p[long_tmp]);
+ long_tmp += sizeof(long);
+ }
+
+ /*
+ * set bit 7 - buffer was
+ * dynamically allocated
+ */
+ attrs[variable_id] |= 0x80;
+
+ /* clear bit 2 - variable is writable */
+ attrs[variable_id] &= ~0x04;
+ attrs[variable_id] |= 0x01;
+
+ }
+
+ /* check that variable is a writable integer array */
+ if ((attrs[variable_id] & 0x1c) != 0x18)
+ status = -ERANGE;
+ else {
+ longptr_tmp = (long *)vars[variable_id];
+
+ /* pop the array index */
+ index = stack[--stack_ptr];
+
+ /* pop the value and store it into the array */
+ longptr_tmp[index] = stack[--stack_ptr];
+ }
+
+ break;
+ case OP_POPA:
+ /*
+ * Pop stack into Boolean array
+ * ...argument 0 is variable ID
+ * ...stack 0 is count
+ * ...stack 1 is array index
+ * ...stack 2 is value
+ */
+ if (!altera_check_stack(stack_ptr, 3, &status))
+ break;
+ variable_id = args[0];
+
+ /*
+ * If variable is read-only,
+ * convert to writable array
+ */
+ if ((version > 0) &&
+ ((attrs[variable_id] & 0x9c) == 0x0c)) {
+ /* Allocate a writable buffer for this array */
+ long_tmp =
+ (var_size[variable_id] + 7L) >> 3L;
+ charptr_tmp2 = (u8 *)vars[variable_id];
+ charptr_tmp =
+ kzalloc(long_tmp, GFP_KERNEL);
+ vars[variable_id] = (long)charptr_tmp;
+
+ if (vars[variable_id] == 0) {
+ status = -ENOMEM;
+ break;
+ }
+
+ /* zero the buffer */
+ for (long_idx = 0L;
+ long_idx < long_tmp;
+ ++long_idx) {
+ charptr_tmp[long_idx] = 0;
+ }
+
+ /* copy previous contents into buffer */
+ for (long_idx = 0L;
+ long_idx < var_size[variable_id];
+ ++long_idx) {
+ long_idx2 = long_idx;
+
+ if (charptr_tmp2[long_idx2 >> 3] &
+ (1 << (long_idx2 & 7))) {
+ charptr_tmp[long_idx >> 3] |=
+ (1 << (long_idx & 7));
+ }
+ }
+
+ /*
+ * set bit 7 - buffer was
+ * dynamically allocated
+ */
+ attrs[variable_id] |= 0x80;
+
+ /* clear bit 2 - variable is writable */
+ attrs[variable_id] &= ~0x04;
+ attrs[variable_id] |= 0x01;
+
+ }
+
+ /*
+ * check that variable is
+ * a writable Boolean array
+ */
+ if ((attrs[variable_id] & 0x1c) != 0x08) {
+ status = -ERANGE;
+ break;
+ }
+
+ charptr_tmp = (u8 *)vars[variable_id];
+
+ /* pop the count (number of bits to copy) */
+ long_count = stack[--stack_ptr];
+
+ /* pop the array index */
+ long_idx = stack[--stack_ptr];
+
+ reverse = 0;
+
+ if (version > 0) {
+ /*
+ * stack 0 = array right index
+ * stack 1 = array left index
+ */
+
+ if (long_idx > long_count) {
+ reverse = 1;
+ long_tmp = long_count;
+ long_count = 1 + long_idx -
+ long_count;
+ long_idx = long_tmp;
+
+ /* reverse POPA is not supported */
+ status = -ERANGE;
+ break;
+ } else
+ long_count = 1 + long_count -
+ long_idx;
+
+ }
+
+ /* pop the data */
+ long_tmp = stack[--stack_ptr];
+
+ if (long_count < 1) {
+ status = -ERANGE;
+ break;
+ }
+
+ for (i = 0; i < long_count; ++i) {
+ if (long_tmp & (1L << (s32) i))
+ charptr_tmp[long_idx >> 3L] |=
+ (1L << (long_idx & 7L));
+ else
+ charptr_tmp[long_idx >> 3L] &=
+ ~(1L << (long_idx & 7L));
+
+ ++long_idx;
+ }
+
+ break;
+ case OP_JMPZ:
+ /*
+ * Pop stack and branch if zero
+ * ...argument 0 is address
+ * ...stack 0 is condition value
+ */
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ if (stack[--stack_ptr] == 0) {
+ pc = args[0] + code_sect;
+ if ((pc < code_sect) ||
+ (pc >= debug_sect))
+ status = -ERANGE;
+ }
+ }
+ break;
+ case OP_DS:
+ case OP_IS:
+ /*
+ * DRSCAN
+ * IRSCAN
+ * ...argument 0 is scan data variable ID
+ * ...stack 0 is array index
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ long_idx = stack[--stack_ptr];
+ long_count = stack[--stack_ptr];
+ reverse = 0;
+ if (version > 0) {
+ /*
+ * stack 0 = array right index
+ * stack 1 = array left index
+ * stack 2 = count
+ */
+ long_tmp = long_count;
+ long_count = stack[--stack_ptr];
+
+ if (long_idx > long_tmp) {
+ reverse = 1;
+ long_idx = long_tmp;
+ }
+ }
+
+ charptr_tmp = (u8 *)vars[args[0]];
+
+ if (reverse) {
+ /*
+ * allocate a buffer
+ * and reverse the data order
+ */
+ charptr_tmp2 = charptr_tmp;
+ charptr_tmp = kzalloc((long_count >> 3) + 1,
+ GFP_KERNEL);
+ if (charptr_tmp == NULL) {
+ status = -ENOMEM;
+ break;
+ }
+
+ long_tmp = long_idx + long_count - 1;
+ long_idx2 = 0;
+ while (long_idx2 < long_count) {
+ if (charptr_tmp2[long_tmp >> 3] &
+ (1 << (long_tmp & 7)))
+ charptr_tmp[long_idx2 >> 3] |=
+ (1 << (long_idx2 & 7));
+ else
+ charptr_tmp[long_idx2 >> 3] &=
+ ~(1 << (long_idx2 & 7));
+
+ --long_tmp;
+ ++long_idx2;
+ }
+ }
+
+ if (opcode == 0x51) /* DS */
+ status = altera_drscan(astate, long_count,
+ charptr_tmp, long_idx);
+ else /* IS */
+ status = altera_irscan(astate, long_count,
+ charptr_tmp, long_idx);
+
+ if (reverse)
+ kfree(charptr_tmp);
+
+ break;
+ case OP_DPRA:
+ /*
+ * DRPRE with array data
+ * ...argument 0 is variable ID
+ * ...stack 0 is array index
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ index = stack[--stack_ptr];
+ count = stack[--stack_ptr];
+
+ if (version > 0)
+ /*
+ * stack 0 = array right index
+ * stack 1 = array left index
+ */
+ count = 1 + count - index;
+
+ charptr_tmp = (u8 *)vars[args[0]];
+ status = altera_set_dr_pre(&astate->js, count, index,
+ charptr_tmp);
+ break;
+ case OP_DPOA:
+ /*
+ * DRPOST with array data
+ * ...argument 0 is variable ID
+ * ...stack 0 is array index
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ index = stack[--stack_ptr];
+ count = stack[--stack_ptr];
+
+ if (version > 0)
+ /*
+ * stack 0 = array right index
+ * stack 1 = array left index
+ */
+ count = 1 + count - index;
+
+ charptr_tmp = (u8 *)vars[args[0]];
+ status = altera_set_dr_post(&astate->js, count, index,
+ charptr_tmp);
+ break;
+ case OP_IPRA:
+ /*
+ * IRPRE with array data
+ * ...argument 0 is variable ID
+ * ...stack 0 is array index
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ index = stack[--stack_ptr];
+ count = stack[--stack_ptr];
+
+ if (version > 0)
+ /*
+ * stack 0 = array right index
+ * stack 1 = array left index
+ */
+ count = 1 + count - index;
+
+ charptr_tmp = (u8 *)vars[args[0]];
+ status = altera_set_ir_pre(&astate->js, count, index,
+ charptr_tmp);
+
+ break;
+ case OP_IPOA:
+ /*
+ * IRPOST with array data
+ * ...argument 0 is variable ID
+ * ...stack 0 is array index
+ * ...stack 1 is count
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ index = stack[--stack_ptr];
+ count = stack[--stack_ptr];
+
+ if (version > 0)
+ /*
+ * stack 0 = array right index
+ * stack 1 = array left index
+ */
+ count = 1 + count - index;
+
+ charptr_tmp = (u8 *)vars[args[0]];
+ status = altera_set_ir_post(&astate->js, count, index,
+ charptr_tmp);
+
+ break;
+ case OP_EXPT:
+ /*
+ * EXPORT
+ * ...argument 0 is string ID
+ * ...stack 0 is integer expression
+ */
+ if (altera_check_stack(stack_ptr, 1, &status)) {
+ name = &p[str_table + args[0]];
+ long_tmp = stack[--stack_ptr];
+ altera_export_int(name, long_tmp);
+ }
+ break;
+ case OP_PSHE:
+ /*
+ * Push integer array element
+ * ...argument 0 is variable ID
+ * ...stack 0 is array index
+ */
+ if (!altera_check_stack(stack_ptr, 1, &status))
+ break;
+ variable_id = args[0];
+ index = stack[stack_ptr - 1];
+
+ /* check variable type */
+ if ((attrs[variable_id] & 0x1f) == 0x19) {
+ /* writable integer array */
+ longptr_tmp = (long *)vars[variable_id];
+ stack[stack_ptr - 1] = longptr_tmp[index];
+ } else if ((attrs[variable_id] & 0x1f) == 0x1c) {
+ /* read-only integer array */
+ long_tmp = vars[variable_id] +
+ (index * sizeof(long));
+ stack[stack_ptr - 1] =
+ get_unaligned_be32(&p[long_tmp]);
+ } else
+ status = -ERANGE;
+
+ break;
+ case OP_PSHA:
+ /*
+ * Push Boolean array
+ * ...argument 0 is variable ID
+ * ...stack 0 is count
+ * ...stack 1 is array index
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ variable_id = args[0];
+
+ /* check that variable is a Boolean array */
+ if ((attrs[variable_id] & 0x18) != 0x08) {
+ status = -ERANGE;
+ break;
+ }
+
+ charptr_tmp = (u8 *)vars[variable_id];
+
+ /* pop the count (number of bits to copy) */
+ count = stack[--stack_ptr];
+
+ /* pop the array index */
+ index = stack[stack_ptr - 1];
+
+ if (version > 0)
+ /*
+ * stack 0 = array right index
+ * stack 1 = array left index
+ */
+ count = 1 + count - index;
+
+ if ((count < 1) || (count > 32)) {
+ status = -ERANGE;
+ break;
+ }
+
+ long_tmp = 0L;
+
+ for (i = 0; i < count; ++i)
+ if (charptr_tmp[(i + index) >> 3] &
+ (1 << ((i + index) & 7)))
+ long_tmp |= (1L << i);
+
+ stack[stack_ptr - 1] = long_tmp;
+
+ break;
+ case OP_DYNA:
+ /*
+ * Dynamically change size of array
+ * ...argument 0 is variable ID
+ * ...stack 0 is new size
+ */
+ if (!altera_check_stack(stack_ptr, 1, &status))
+ break;
+ variable_id = args[0];
+ long_tmp = stack[--stack_ptr];
+
+ if (long_tmp > var_size[variable_id]) {
+ var_size[variable_id] = long_tmp;
+
+ if (attrs[variable_id] & 0x10)
+ /* allocate integer array */
+ long_tmp *= sizeof(long);
+ else
+ /* allocate Boolean array */
+ long_tmp = (long_tmp + 7) >> 3;
+
+ /*
+ * If the buffer was previously allocated,
+ * free it
+ */
+ if (attrs[variable_id] & 0x80) {
+ kfree((void *)vars[variable_id]);
+ vars[variable_id] = 0;
+ }
+
+ /*
+ * Allocate a new buffer
+ * of the requested size
+ */
+ vars[variable_id] = (long)
+ kzalloc(long_tmp, GFP_KERNEL);
+
+ if (vars[variable_id] == 0) {
+ status = -ENOMEM;
+ break;
+ }
+
+ /*
+ * Set the attribute bit to indicate that
+ * this buffer was dynamically allocated and
+ * should be freed later
+ */
+ attrs[variable_id] |= 0x80;
+
+ /* zero out memory */
+ count = ((var_size[variable_id] + 7L) /
+ 8L);
+ charptr_tmp = (u8 *)(vars[variable_id]);
+ for (index = 0; index < count; ++index)
+ charptr_tmp[index] = 0;
+
+ }
+
+ break;
+ case OP_EXPV:
+ /*
+ * Export Boolean array
+ * ...argument 0 is string ID
+ * ...stack 0 is variable ID
+ * ...stack 1 is array right index
+ * ...stack 2 is array left index
+ */
+ if (!altera_check_stack(stack_ptr, 3, &status))
+ break;
+ if (version == 0) {
+ /* EXPV is not supported in JBC 1.0 */
+ bad_opcode = 1;
+ break;
+ }
+ name = &p[str_table + args[0]];
+ variable_id = stack[--stack_ptr];
+ long_idx = stack[--stack_ptr];/* right indx */
+ long_idx2 = stack[--stack_ptr];/* left indx */
+
+ if (long_idx > long_idx2) {
+ /* reverse indices not supported */
+ status = -ERANGE;
+ break;
+ }
+
+ long_count = 1 + long_idx2 - long_idx;
+
+ charptr_tmp = (u8 *)vars[variable_id];
+ charptr_tmp2 = NULL;
+
+ if ((long_idx & 7L) != 0) {
+ s32 k = long_idx;
+ charptr_tmp2 =
+ kzalloc(((long_count + 7L) / 8L),
+ GFP_KERNEL);
+ if (charptr_tmp2 == NULL) {
+ status = -ENOMEM;
+ break;
+ }
+
+ for (i = 0; i < long_count; ++i) {
+ if (charptr_tmp[k >> 3] &
+ (1 << (k & 7)))
+ charptr_tmp2[i >> 3] |=
+ (1 << (i & 7));
+ else
+ charptr_tmp2[i >> 3] &=
+ ~(1 << (i & 7));
+
+ ++k;
+ }
+ charptr_tmp = charptr_tmp2;
+
+ } else if (long_idx != 0)
+ charptr_tmp = &charptr_tmp[long_idx >> 3];
+
+ altera_export_bool_array(name, charptr_tmp,
+ long_count);
+
+ /* free allocated buffer */
+ if ((long_idx & 7L) != 0)
+ kfree(charptr_tmp2);
+
+ break;
+ case OP_COPY: {
+ /*
+ * Array copy
+ * ...argument 0 is dest ID
+ * ...argument 1 is source ID
+ * ...stack 0 is count
+ * ...stack 1 is dest index
+ * ...stack 2 is source index
+ */
+ s32 copy_count;
+ s32 copy_index;
+ s32 copy_index2;
+ s32 destleft;
+ s32 src_count;
+ s32 dest_count;
+ int src_reverse = 0;
+ int dest_reverse = 0;
+
+ if (!altera_check_stack(stack_ptr, 3, &status))
+ break;
+
+ copy_count = stack[--stack_ptr];
+ copy_index = stack[--stack_ptr];
+ copy_index2 = stack[--stack_ptr];
+ reverse = 0;
+
+ if (version > 0) {
+ /*
+ * stack 0 = source right index
+ * stack 1 = source left index
+ * stack 2 = destination right index
+ * stack 3 = destination left index
+ */
+ destleft = stack[--stack_ptr];
+
+ if (copy_count > copy_index) {
+ src_reverse = 1;
+ reverse = 1;
+ src_count = 1 + copy_count - copy_index;
+ /* copy_index = source start index */
+ } else {
+ src_count = 1 + copy_index - copy_count;
+ /* source start index */
+ copy_index = copy_count;
+ }
+
+ if (copy_index2 > destleft) {
+ dest_reverse = 1;
+ reverse = !reverse;
+ dest_count = 1 + copy_index2 - destleft;
+ /* destination start index */
+ copy_index2 = destleft;
+ } else
+ dest_count = 1 + destleft - copy_index2;
+
+ copy_count = (src_count < dest_count) ?
+ src_count : dest_count;
+
+ if ((src_reverse || dest_reverse) &&
+ (src_count != dest_count))
+ /*
+ * If either the source or destination
+ * is reversed, we can't tolerate
+ * a length mismatch, because we
+ * "left justify" arrays when copying.
+ * This won't work correctly
+ * with reversed arrays.
+ */
+ status = -ERANGE;
+
+ }
+
+ count = copy_count;
+ index = copy_index;
+ index2 = copy_index2;
+
+ /*
+ * If destination is a read-only array,
+ * allocate a buffer and convert it to a writable array
+ */
+ variable_id = args[1];
+ if ((version > 0) &&
+ ((attrs[variable_id] & 0x9c) == 0x0c)) {
+ /* Allocate a writable buffer for this array */
+ long_tmp =
+ (var_size[variable_id] + 7L) >> 3L;
+ charptr_tmp2 = (u8 *)vars[variable_id];
+ charptr_tmp =
+ kzalloc(long_tmp, GFP_KERNEL);
+ vars[variable_id] = (long)charptr_tmp;
+
+ if (vars[variable_id] == 0) {
+ status = -ENOMEM;
+ break;
+ }
+
+ /* zero the buffer */
+ for (long_idx = 0L; long_idx < long_tmp;
+ ++long_idx)
+ charptr_tmp[long_idx] = 0;
+
+ /* copy previous contents into buffer */
+ for (long_idx = 0L;
+ long_idx < var_size[variable_id];
+ ++long_idx) {
+ long_idx2 = long_idx;
+
+ if (charptr_tmp2[long_idx2 >> 3] &
+ (1 << (long_idx2 & 7)))
+ charptr_tmp[long_idx >> 3] |=
+ (1 << (long_idx & 7));
+
+ }
+
+ /*
+ set bit 7 - buffer was dynamically allocated */
+ attrs[variable_id] |= 0x80;
+
+ /* clear bit 2 - variable is writable */
+ attrs[variable_id] &= ~0x04;
+ attrs[variable_id] |= 0x01;
+ }
+
+ charptr_tmp = (u8 *)vars[args[1]];
+ charptr_tmp2 = (u8 *)vars[args[0]];
+
+ /* check if destination is a writable Boolean array */
+ if ((attrs[args[1]] & 0x1c) != 0x08) {
+ status = -ERANGE;
+ break;
+ }
+
+ if (count < 1) {
+ status = -ERANGE;
+ break;
+ }
+
+ if (reverse)
+ index2 += (count - 1);
+
+ for (i = 0; i < count; ++i) {
+ if (charptr_tmp2[index >> 3] &
+ (1 << (index & 7)))
+ charptr_tmp[index2 >> 3] |=
+ (1 << (index2 & 7));
+ else
+ charptr_tmp[index2 >> 3] &=
+ ~(1 << (index2 & 7));
+
+ ++index;
+ if (reverse)
+ --index2;
+ else
+ ++index2;
+ }
+
+ break;
+ }
+ case OP_DSC:
+ case OP_ISC: {
+ /*
+ * DRSCAN with capture
+ * IRSCAN with capture
+ * ...argument 0 is scan data variable ID
+ * ...argument 1 is capture variable ID
+ * ...stack 0 is capture index
+ * ...stack 1 is scan data index
+ * ...stack 2 is count
+ */
+ s32 scan_right, scan_left;
+ s32 capture_count = 0;
+ s32 scan_count = 0;
+ s32 capture_index;
+ s32 scan_index;
+
+ if (!altera_check_stack(stack_ptr, 3, &status))
+ break;
+
+ capture_index = stack[--stack_ptr];
+ scan_index = stack[--stack_ptr];
+
+ if (version > 0) {
+ /*
+ * stack 0 = capture right index
+ * stack 1 = capture left index
+ * stack 2 = scan right index
+ * stack 3 = scan left index
+ * stack 4 = count
+ */
+ scan_right = stack[--stack_ptr];
+ scan_left = stack[--stack_ptr];
+ capture_count = 1 + scan_index - capture_index;
+ scan_count = 1 + scan_left - scan_right;
+ scan_index = scan_right;
+ }
+
+ long_count = stack[--stack_ptr];
+ /*
+ * If capture array is read-only, allocate a buffer
+ * and convert it to a writable array
+ */
+ variable_id = args[1];
+ if ((version > 0) &&
+ ((attrs[variable_id] & 0x9c) == 0x0c)) {
+ /* Allocate a writable buffer for this array */
+ long_tmp =
+ (var_size[variable_id] + 7L) >> 3L;
+ charptr_tmp2 = (u8 *)vars[variable_id];
+ charptr_tmp =
+ kzalloc(long_tmp, GFP_KERNEL);
+ vars[variable_id] = (long)charptr_tmp;
+
+ if (vars[variable_id] == 0) {
+ status = -ENOMEM;
+ break;
+ }
+
+ /* zero the buffer */
+ for (long_idx = 0L; long_idx < long_tmp;
+ ++long_idx)
+ charptr_tmp[long_idx] = 0;
+
+ /* copy previous contents into buffer */
+ for (long_idx = 0L;
+ long_idx < var_size[variable_id];
+ ++long_idx) {
+ long_idx2 = long_idx;
+
+ if (charptr_tmp2[long_idx2 >> 3] &
+ (1 << (long_idx2 & 7)))
+ charptr_tmp[long_idx >> 3] |=
+ (1 << (long_idx & 7));
+
+ }
+
+ /*
+ * set bit 7 - buffer was
+ * dynamically allocated
+ */
+ attrs[variable_id] |= 0x80;
+
+ /* clear bit 2 - variable is writable */
+ attrs[variable_id] &= ~0x04;
+ attrs[variable_id] |= 0x01;
+
+ }
+
+ charptr_tmp = (u8 *)vars[args[0]];
+ charptr_tmp2 = (u8 *)vars[args[1]];
+
+ if ((version > 0) &&
+ ((long_count > capture_count) ||
+ (long_count > scan_count))) {
+ status = -ERANGE;
+ break;
+ }
+
+ /*
+ * check that capture array
+ * is a writable Boolean array
+ */
+ if ((attrs[args[1]] & 0x1c) != 0x08) {
+ status = -ERANGE;
+ break;
+ }
+
+ if (status == 0) {
+ if (opcode == 0x82) /* DSC */
+ status = altera_swap_dr(astate,
+ long_count,
+ charptr_tmp,
+ scan_index,
+ charptr_tmp2,
+ capture_index);
+ else /* ISC */
+ status = altera_swap_ir(astate,
+ long_count,
+ charptr_tmp,
+ scan_index,
+ charptr_tmp2,
+ capture_index);
+
+ }
+
+ break;
+ }
+ case OP_WAIT:
+ /*
+ * WAIT
+ * ...argument 0 is wait state
+ * ...argument 1 is end state
+ * ...stack 0 is cycles
+ * ...stack 1 is microseconds
+ */
+ if (!altera_check_stack(stack_ptr, 2, &status))
+ break;
+ long_tmp = stack[--stack_ptr];
+
+ if (long_tmp != 0L)
+ status = altera_wait_cycles(astate, long_tmp,
+ args[0]);
+
+ long_tmp = stack[--stack_ptr];
+
+ if ((status == 0) && (long_tmp != 0L))
+ status = altera_wait_msecs(astate,
+ long_tmp,
+ args[0]);
+
+ if ((status == 0) && (args[1] != args[0]))
+ status = altera_goto_jstate(astate,
+ args[1]);
+
+ if (version > 0) {
+ --stack_ptr; /* throw away MAX cycles */
+ --stack_ptr; /* throw away MAX microseconds */
+ }
+ break;
+ case OP_CMPA: {
+ /*
+ * Array compare
+ * ...argument 0 is source 1 ID
+ * ...argument 1 is source 2 ID
+ * ...argument 2 is mask ID
+ * ...stack 0 is source 1 index
+ * ...stack 1 is source 2 index
+ * ...stack 2 is mask index
+ * ...stack 3 is count
+ */
+ s32 a, b;
+ u8 *source1 = (u8 *)vars[args[0]];
+ u8 *source2 = (u8 *)vars[args[1]];
+ u8 *mask = (u8 *)vars[args[2]];
+ u32 index1;
+ u32 index2;
+ u32 mask_index;
+
+ if (!altera_check_stack(stack_ptr, 4, &status))
+ break;
+
+ index1 = stack[--stack_ptr];
+ index2 = stack[--stack_ptr];
+ mask_index = stack[--stack_ptr];
+ long_count = stack[--stack_ptr];
+
+ if (version > 0) {
+ /*
+ * stack 0 = source 1 right index
+ * stack 1 = source 1 left index
+ * stack 2 = source 2 right index
+ * stack 3 = source 2 left index
+ * stack 4 = mask right index
+ * stack 5 = mask left index
+ */
+ s32 mask_right = stack[--stack_ptr];
+ s32 mask_left = stack[--stack_ptr];
+ /* source 1 count */
+ a = 1 + index2 - index1;
+ /* source 2 count */
+ b = 1 + long_count - mask_index;
+ a = (a < b) ? a : b;
+ /* mask count */
+ b = 1 + mask_left - mask_right;
+ a = (a < b) ? a : b;
+ /* source 2 start index */
+ index2 = mask_index;
+ /* mask start index */
+ mask_index = mask_right;
+ long_count = a;
+ }
+
+ long_tmp = 1L;
+
+ if (long_count < 1)
+ status = -ERANGE;
+ else {
+ count = long_count;
+
+ for (i = 0; i < count; ++i) {
+ if (mask[mask_index >> 3] &
+ (1 << (mask_index & 7))) {
+ a = source1[index1 >> 3] &
+ (1 << (index1 & 7))
+ ? 1 : 0;
+ b = source2[index2 >> 3] &
+ (1 << (index2 & 7))
+ ? 1 : 0;
+
+ if (a != b) /* failure */
+ long_tmp = 0L;
+ }
+ ++index1;
+ ++index2;
+ ++mask_index;
+ }
+ }
+
+ stack[stack_ptr++] = long_tmp;
+
+ break;
+ }
+ default:
+ /* Unrecognized opcode -- ERROR! */
+ bad_opcode = 1;
+ break;
+ }
+
+ if (bad_opcode)
+ status = -ENOSYS;
+
+ if ((stack_ptr < 0) || (stack_ptr >= ALTERA_STACK_SIZE))
+ status = -EOVERFLOW;
+
+ if (status != 0) {
+ done = 1;
+ *error_address = (s32)(opcode_address - code_sect);
+ }
+ }
+
+ altera_free_buffers(astate);
+
+ /* Free all dynamically allocated arrays */
+ if ((attrs != NULL) && (vars != NULL))
+ for (i = 0; i < sym_count; ++i)
+ if (attrs[i] & 0x80)
+ kfree((void *)vars[i]);
+
+ kfree(vars);
+ kfree(var_size);
+ kfree(attrs);
+ kfree(proc_attributes);
+
+ return status;
+}
+
+static int altera_get_note(u8 *p, s32 program_size,
+ s32 *offset, char *key, char *value, int length)
+/*
+ * Gets key and value of NOTE fields in the JBC file.
+ * Can be called in two modes: if offset pointer is NULL,
+ * then the function searches for note fields which match
+ * the key string provided. If offset is not NULL, then
+ * the function finds the next note field of any key,
+ * starting at the offset specified by the offset pointer.
+ * Returns 0 for success, else appropriate error code
+ */
+{
+ int status = -ENODATA;
+ u32 note_strings = 0L;
+ u32 note_table = 0L;
+ u32 note_count = 0L;
+ u32 first_word = 0L;
+ int version = 0;
+ int delta = 0;
+ char *key_ptr;
+ char *value_ptr;
+ int i;
+
+ /* Read header information */
+ if (program_size > 52L) {
+ first_word = get_unaligned_be32(&p[0]);
+ version = (first_word & 1L);
+ delta = version * 8;
+
+ note_strings = get_unaligned_be32(&p[8 + delta]);
+ note_table = get_unaligned_be32(&p[12 + delta]);
+ note_count = get_unaligned_be32(&p[44 + (2 * delta)]);
+ }
+
+ if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L))
+ return -EIO;
+
+ if (note_count <= 0L)
+ return status;
+
+ if (offset == NULL) {
+ /*
+ * We will search for the first note with a specific key,
+ * and return only the value
+ */
+ for (i = 0; (i < note_count) &&
+ (status != 0); ++i) {
+ key_ptr = &p[note_strings +
+ get_unaligned_be32(
+ &p[note_table + (8 * i)])];
+ if ((strnicmp(key, key_ptr, strlen(key_ptr)) == 0) &&
+ (key != NULL)) {
+ status = 0;
+
+ value_ptr = &p[note_strings +
+ get_unaligned_be32(
+ &p[note_table + (8 * i) + 4])];
+
+ if (value != NULL)
+ strlcpy(value, value_ptr, length);
+
+ }
+ }
+ } else {
+ /*
+ * We will search for the next note, regardless of the key,
+ * and return both the value and the key
+ */
+
+ i = *offset;
+
+ if ((i >= 0) && (i < note_count)) {
+ status = 0;
+
+ if (key != NULL)
+ strlcpy(key, &p[note_strings +
+ get_unaligned_be32(
+ &p[note_table + (8 * i)])],
+ length);
+
+ if (value != NULL)
+ strlcpy(value, &p[note_strings +
+ get_unaligned_be32(
+ &p[note_table + (8 * i) + 4])],
+ length);
+
+ *offset = i + 1;
+ }
+ }
+
+ return status;
+}
+
+static int altera_check_crc(u8 *p, s32 program_size)
+{
+ int status = 0;
+ u16 local_expected = 0,
+ local_actual = 0,
+ shift_reg = 0xffff;
+ int bit, feedback;
+ u8 databyte;
+ u32 i;
+ u32 crc_section = 0L;
+ u32 first_word = 0L;
+ int version = 0;
+ int delta = 0;
+
+ if (program_size > 52L) {
+ first_word = get_unaligned_be32(&p[0]);
+ version = (first_word & 1L);
+ delta = version * 8;
+
+ crc_section = get_unaligned_be32(&p[32 + delta]);
+ }
+
+ if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L))
+ status = -EIO;
+
+ if (crc_section >= program_size)
+ status = -EIO;
+
+ if (status == 0) {
+ local_expected = (u16)get_unaligned_be16(&p[crc_section]);
+
+ for (i = 0; i < crc_section; ++i) {
+ databyte = p[i];
+ for (bit = 0; bit < 8; bit++) {
+ feedback = (databyte ^ shift_reg) & 0x01;
+ shift_reg >>= 1;
+ if (feedback)
+ shift_reg ^= 0x8408;
+
+ databyte >>= 1;
+ }
+ }
+
+ local_actual = (u16)~shift_reg;
+
+ if (local_expected != local_actual)
+ status = -EILSEQ;
+
+ }
+
+ if (debug || status) {
+ switch (status) {
+ case 0:
+ printk(KERN_INFO "%s: CRC matched: %04x\n", __func__,
+ local_actual);
+ break;
+ case -EILSEQ:
+ printk(KERN_ERR "%s: CRC mismatch: expected %04x, "
+ "actual %04x\n", __func__, local_expected,
+ local_actual);
+ break;
+ case -ENODATA:
+ printk(KERN_ERR "%s: expected CRC not found, "
+ "actual CRC = %04x\n", __func__,
+ local_actual);
+ break;
+ case -EIO:
+ printk(KERN_ERR "%s: error: format isn't "
+ "recognized.\n", __func__);
+ break;
+ default:
+ printk(KERN_ERR "%s: CRC function returned error "
+ "code %d\n", __func__, status);
+ break;
+ }
+ }
+
+ return status;
+}
+
+static int altera_get_file_info(u8 *p,
+ s32 program_size,
+ int *format_version,
+ int *action_count,
+ int *procedure_count)
+{
+ int status = -EIO;
+ u32 first_word = 0;
+ int version = 0;
+
+ if (program_size <= 52L)
+ return status;
+
+ first_word = get_unaligned_be32(&p[0]);
+
+ if ((first_word == 0x4A414D00L) || (first_word == 0x4A414D01L)) {
+ status = 0;
+
+ version = (first_word & 1L);
+ *format_version = version + 1;
+
+ if (version > 0) {
+ *action_count = get_unaligned_be32(&p[48]);
+ *procedure_count = get_unaligned_be32(&p[52]);
+ }
+ }
+
+ return status;
+}
+
+static int altera_get_act_info(u8 *p,
+ s32 program_size,
+ int index,
+ char **name,
+ char **description,
+ struct altera_procinfo **proc_list)
+{
+ int status = -EIO;
+ struct altera_procinfo *procptr = NULL;
+ struct altera_procinfo *tmpptr = NULL;
+ u32 first_word = 0L;
+ u32 action_table = 0L;
+ u32 proc_table = 0L;
+ u32 str_table = 0L;
+ u32 note_strings = 0L;
+ u32 action_count = 0L;
+ u32 proc_count = 0L;
+ u32 act_name_id = 0L;
+ u32 act_desc_id = 0L;
+ u32 act_proc_id = 0L;
+ u32 act_proc_name = 0L;
+ u8 act_proc_attribute = 0;
+
+ if (program_size <= 52L)
+ return status;
+ /* Read header information */
+ first_word = get_unaligned_be32(&p[0]);
+
+ if (first_word != 0x4A414D01L)
+ return status;
+
+ action_table = get_unaligned_be32(&p[4]);
+ proc_table = get_unaligned_be32(&p[8]);
+ str_table = get_unaligned_be32(&p[12]);
+ note_strings = get_unaligned_be32(&p[16]);
+ action_count = get_unaligned_be32(&p[48]);
+ proc_count = get_unaligned_be32(&p[52]);
+
+ if (index >= action_count)
+ return status;
+
+ act_name_id = get_unaligned_be32(&p[action_table + (12 * index)]);
+ act_desc_id = get_unaligned_be32(&p[action_table + (12 * index) + 4]);
+ act_proc_id = get_unaligned_be32(&p[action_table + (12 * index) + 8]);
+
+ *name = &p[str_table + act_name_id];
+
+ if (act_desc_id < (note_strings - str_table))
+ *description = &p[str_table + act_desc_id];
+
+ do {
+ act_proc_name = get_unaligned_be32(
+ &p[proc_table + (13 * act_proc_id)]);
+ act_proc_attribute =
+ (p[proc_table + (13 * act_proc_id) + 8] & 0x03);
+
+ procptr =
+ kzalloc(sizeof(struct altera_procinfo),
+ GFP_KERNEL);
+
+ if (procptr == NULL)
+ status = -ENOMEM;
+ else {
+ procptr->name = &p[str_table + act_proc_name];
+ procptr->attrs = act_proc_attribute;
+ procptr->next = NULL;
+
+ /* add record to end of linked list */
+ if (*proc_list == NULL)
+ *proc_list = procptr;
+ else {
+ tmpptr = *proc_list;
+ while (tmpptr->next != NULL)
+ tmpptr = tmpptr->next;
+ tmpptr->next = procptr;
+ }
+ }
+
+ act_proc_id = get_unaligned_be32(
+ &p[proc_table + (13 * act_proc_id) + 4]);
+ } while ((act_proc_id != 0) && (act_proc_id < proc_count));
+
+ return status;
+}
+
+int altera_init(struct altera_config *config, const struct firmware *fw)
+{
+ struct altera_state *astate = NULL;
+ struct altera_procinfo *proc_list = NULL;
+ struct altera_procinfo *procptr = NULL;
+ char *key = NULL;
+ char *value = NULL;
+ char *action_name = NULL;
+ char *description = NULL;
+ int exec_result = 0;
+ int exit_code = 0;
+ int format_version = 0;
+ int action_count = 0;
+ int procedure_count = 0;
+ int index = 0;
+ s32 offset = 0L;
+ s32 error_address = 0L;
+ int retval = 0;
+
+ key = kzalloc(33, GFP_KERNEL);
+ if (!key) {
+ retval = -ENOMEM;
+ goto out;
+ }
+ value = kzalloc(257, GFP_KERNEL);
+ if (!value) {
+ retval = -ENOMEM;
+ goto free_key;
+ }
+ astate = kzalloc(sizeof(struct altera_state), GFP_KERNEL);
+ if (!astate) {
+ retval = -ENOMEM;
+ goto free_value;
+ }
+
+ astate->config = config;
+ if (!astate->config->jtag_io) {
+ dprintk(KERN_INFO "%s: using byteblaster!\n", __func__);
+ astate->config->jtag_io = netup_jtag_io_lpt;
+ }
+
+ altera_check_crc((u8 *)fw->data, fw->size);
+
+ if (debug) {
+ altera_get_file_info((u8 *)fw->data, fw->size, &format_version,
+ &action_count, &procedure_count);
+ printk(KERN_INFO "%s: File format is %s ByteCode format\n",
+ __func__, (format_version == 2) ? "Jam STAPL" :
+ "pre-standardized Jam 1.1");
+ while (altera_get_note((u8 *)fw->data, fw->size,
+ &offset, key, value, 256) == 0)
+ printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n",
+ __func__, key, value);
+ }
+
+ if (debug && (format_version == 2) && (action_count > 0)) {
+ printk(KERN_INFO "%s: Actions available:\n", __func__);
+ for (index = 0; index < action_count; ++index) {
+ altera_get_act_info((u8 *)fw->data, fw->size,
+ index, &action_name,
+ &description,
+ &proc_list);
+
+ if (description == NULL)
+ printk(KERN_INFO "%s: %s\n",
+ __func__,
+ action_name);
+ else
+ printk(KERN_INFO "%s: %s \"%s\"\n",
+ __func__,
+ action_name,
+ description);
+
+ procptr = proc_list;
+ while (procptr != NULL) {
+ if (procptr->attrs != 0)
+ printk(KERN_INFO "%s: %s (%s)\n",
+ __func__,
+ procptr->name,
+ (procptr->attrs == 1) ?
+ "optional" : "recommended");
+
+ proc_list = procptr->next;
+ kfree(procptr);
+ procptr = proc_list;
+ }
+ }
+
+ printk(KERN_INFO "\n");
+ }
+
+ exec_result = altera_execute(astate, (u8 *)fw->data, fw->size,
+ &error_address, &exit_code, &format_version);
+
+ if (exit_code)
+ exec_result = -EREMOTEIO;
+
+ if ((format_version == 2) && (exec_result == -EINVAL)) {
+ if (astate->config->action == NULL)
+ printk(KERN_ERR "%s: error: no action specified for "
+ "Jam STAPL file.\nprogram terminated.\n",
+ __func__);
+ else
+ printk(KERN_ERR "%s: error: action \"%s\""
+ " is not supported "
+ "for this Jam STAPL file.\n"
+ "Program terminated.\n", __func__,
+ astate->config->action);
+
+ } else if (exec_result)
+ printk(KERN_ERR "%s: error %d\n", __func__, exec_result);
+
+ kfree(astate);
+free_value:
+ kfree(value);
+free_key:
+ kfree(key);
+out:
+ return retval;
+}
+EXPORT_SYMBOL(altera_init);
diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c
index 27dc0d2..f6586d5 100644
--- a/drivers/misc/fsa9480.c
+++ b/drivers/misc/fsa9480.c
@@ -400,7 +400,8 @@
return ret;
}
- device_init_wakeup(&client->dev, pdata->wakeup);
+ if (pdata)
+ device_init_wakeup(&client->dev, pdata->wakeup);
}
return 0;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index 8b51cd6..29d12a7 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -163,7 +163,7 @@
int i;
if (lis3->blkread) {
- if (lis3_dev.whoami == WAI_12B) {
+ if (lis3->whoami == WAI_12B) {
u16 data[3];
lis3->blkread(lis3, OUTX_L, 6, (u8 *)data);
for (i = 0; i < 3; i++)
@@ -195,18 +195,30 @@
static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
/* ODR is Output Data Rate */
-static int lis3lv02d_get_odr(void)
+static int lis3lv02d_get_odr(struct lis3lv02d *lis3)
{
u8 ctrl;
int shift;
- lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
- ctrl &= lis3_dev.odr_mask;
- shift = ffs(lis3_dev.odr_mask) - 1;
- return lis3_dev.odrs[(ctrl >> shift)];
+ lis3->read(lis3, CTRL_REG1, &ctrl);
+ ctrl &= lis3->odr_mask;
+ shift = ffs(lis3->odr_mask) - 1;
+ return lis3->odrs[(ctrl >> shift)];
}
-static int lis3lv02d_set_odr(int rate)
+static int lis3lv02d_get_pwron_wait(struct lis3lv02d *lis3)
+{
+ int div = lis3lv02d_get_odr(lis3);
+
+ if (WARN_ONCE(div == 0, "device returned spurious data"))
+ return -ENXIO;
+
+ /* LIS3 power on delay is quite long */
+ msleep(lis3->pwron_delay / div);
+ return 0;
+}
+
+static int lis3lv02d_set_odr(struct lis3lv02d *lis3, int rate)
{
u8 ctrl;
int i, len, shift;
@@ -214,14 +226,14 @@
if (!rate)
return -EINVAL;
- lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
- ctrl &= ~lis3_dev.odr_mask;
- len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */
- shift = ffs(lis3_dev.odr_mask) - 1;
+ lis3->read(lis3, CTRL_REG1, &ctrl);
+ ctrl &= ~lis3->odr_mask;
+ len = 1 << hweight_long(lis3->odr_mask); /* # of possible values */
+ shift = ffs(lis3->odr_mask) - 1;
for (i = 0; i < len; i++)
- if (lis3_dev.odrs[i] == rate) {
- lis3_dev.write(&lis3_dev, CTRL_REG1,
+ if (lis3->odrs[i] == rate) {
+ lis3->write(lis3, CTRL_REG1,
ctrl | (i << shift));
return 0;
}
@@ -240,12 +252,12 @@
mutex_lock(&lis3->mutex);
irq_cfg = lis3->irq_cfg;
- if (lis3_dev.whoami == WAI_8B) {
+ if (lis3->whoami == WAI_8B) {
lis3->data_ready_count[IRQ_LINE0] = 0;
lis3->data_ready_count[IRQ_LINE1] = 0;
/* Change interrupt cfg to data ready for selftest */
- atomic_inc(&lis3_dev.wake_thread);
+ atomic_inc(&lis3->wake_thread);
lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY;
lis3->read(lis3, CTRL_REG3, &ctrl_reg_data);
lis3->write(lis3, CTRL_REG3, (ctrl_reg_data &
@@ -253,12 +265,12 @@
(LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY));
}
- if (lis3_dev.whoami == WAI_3DC) {
+ if (lis3->whoami == WAI_3DC) {
ctlreg = CTRL_REG4;
selftest = CTRL4_ST0;
} else {
ctlreg = CTRL_REG1;
- if (lis3_dev.whoami == WAI_12B)
+ if (lis3->whoami == WAI_12B)
selftest = CTRL1_ST;
else
selftest = CTRL1_STP;
@@ -266,7 +278,9 @@
lis3->read(lis3, ctlreg, ®);
lis3->write(lis3, ctlreg, (reg | selftest));
- msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+ ret = lis3lv02d_get_pwron_wait(lis3);
+ if (ret)
+ goto fail;
/* Read directly to avoid axis remap */
x = lis3->read_data(lis3, OUTX);
@@ -275,7 +289,9 @@
/* back to normal settings */
lis3->write(lis3, ctlreg, reg);
- msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+ ret = lis3lv02d_get_pwron_wait(lis3);
+ if (ret)
+ goto fail;
results[0] = x - lis3->read_data(lis3, OUTX);
results[1] = y - lis3->read_data(lis3, OUTY);
@@ -283,9 +299,9 @@
ret = 0;
- if (lis3_dev.whoami == WAI_8B) {
+ if (lis3->whoami == WAI_8B) {
/* Restore original interrupt configuration */
- atomic_dec(&lis3_dev.wake_thread);
+ atomic_dec(&lis3->wake_thread);
lis3->write(lis3, CTRL_REG3, ctrl_reg_data);
lis3->irq_cfg = irq_cfg;
@@ -363,8 +379,9 @@
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
-void lis3lv02d_poweron(struct lis3lv02d *lis3)
+int lis3lv02d_poweron(struct lis3lv02d *lis3)
{
+ int err;
u8 reg;
lis3->init(lis3);
@@ -384,35 +401,41 @@
lis3->write(lis3, CTRL_REG2, reg);
}
- /* LIS3 power on delay is quite long */
- msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+ err = lis3lv02d_get_pwron_wait(lis3);
+ if (err)
+ return err;
if (lis3->reg_ctrl)
lis3_context_restore(lis3);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
{
+ struct lis3lv02d *lis3 = pidev->private;
int x, y, z;
- mutex_lock(&lis3_dev.mutex);
- lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+ mutex_lock(&lis3->mutex);
+ lis3lv02d_get_xyz(lis3, &x, &y, &z);
input_report_abs(pidev->input, ABS_X, x);
input_report_abs(pidev->input, ABS_Y, y);
input_report_abs(pidev->input, ABS_Z, z);
input_sync(pidev->input);
- mutex_unlock(&lis3_dev.mutex);
+ mutex_unlock(&lis3->mutex);
}
static void lis3lv02d_joystick_open(struct input_polled_dev *pidev)
{
- if (lis3_dev.pm_dev)
- pm_runtime_get_sync(lis3_dev.pm_dev);
+ struct lis3lv02d *lis3 = pidev->private;
- if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev)
- atomic_set(&lis3_dev.wake_thread, 1);
+ if (lis3->pm_dev)
+ pm_runtime_get_sync(lis3->pm_dev);
+
+ if (lis3->pdata && lis3->whoami == WAI_8B && lis3->idev)
+ atomic_set(&lis3->wake_thread, 1);
/*
* Update coordinates for the case where poll interval is 0 and
* the chip in running purely under interrupt control
@@ -422,14 +445,18 @@
static void lis3lv02d_joystick_close(struct input_polled_dev *pidev)
{
- atomic_set(&lis3_dev.wake_thread, 0);
- if (lis3_dev.pm_dev)
- pm_runtime_put(lis3_dev.pm_dev);
+ struct lis3lv02d *lis3 = pidev->private;
+
+ atomic_set(&lis3->wake_thread, 0);
+ if (lis3->pm_dev)
+ pm_runtime_put(lis3->pm_dev);
}
-static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+static irqreturn_t lis302dl_interrupt(int irq, void *data)
{
- if (!test_bit(0, &lis3_dev.misc_opened))
+ struct lis3lv02d *lis3 = data;
+
+ if (!test_bit(0, &lis3->misc_opened))
goto out;
/*
@@ -437,12 +464,12 @@
* the lid is closed. This leads to interrupts as soon as a little move
* is done.
*/
- atomic_inc(&lis3_dev.count);
+ atomic_inc(&lis3->count);
- wake_up_interruptible(&lis3_dev.misc_wait);
- kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
+ wake_up_interruptible(&lis3->misc_wait);
+ kill_fasync(&lis3->async_queue, SIGIO, POLL_IN);
out:
- if (atomic_read(&lis3_dev.wake_thread))
+ if (atomic_read(&lis3->wake_thread))
return IRQ_WAKE_THREAD;
return IRQ_HANDLED;
}
@@ -514,28 +541,37 @@
static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
{
- if (test_and_set_bit(0, &lis3_dev.misc_opened))
+ struct lis3lv02d *lis3 = container_of(file->private_data,
+ struct lis3lv02d, miscdev);
+
+ if (test_and_set_bit(0, &lis3->misc_opened))
return -EBUSY; /* already open */
- if (lis3_dev.pm_dev)
- pm_runtime_get_sync(lis3_dev.pm_dev);
+ if (lis3->pm_dev)
+ pm_runtime_get_sync(lis3->pm_dev);
- atomic_set(&lis3_dev.count, 0);
+ atomic_set(&lis3->count, 0);
return 0;
}
static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
{
- fasync_helper(-1, file, 0, &lis3_dev.async_queue);
- clear_bit(0, &lis3_dev.misc_opened); /* release the device */
- if (lis3_dev.pm_dev)
- pm_runtime_put(lis3_dev.pm_dev);
+ struct lis3lv02d *lis3 = container_of(file->private_data,
+ struct lis3lv02d, miscdev);
+
+ fasync_helper(-1, file, 0, &lis3->async_queue);
+ clear_bit(0, &lis3->misc_opened); /* release the device */
+ if (lis3->pm_dev)
+ pm_runtime_put(lis3->pm_dev);
return 0;
}
static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
size_t count, loff_t *pos)
{
+ struct lis3lv02d *lis3 = container_of(file->private_data,
+ struct lis3lv02d, miscdev);
+
DECLARE_WAITQUEUE(wait, current);
u32 data;
unsigned char byte_data;
@@ -544,10 +580,10 @@
if (count < 1)
return -EINVAL;
- add_wait_queue(&lis3_dev.misc_wait, &wait);
+ add_wait_queue(&lis3->misc_wait, &wait);
while (true) {
set_current_state(TASK_INTERRUPTIBLE);
- data = atomic_xchg(&lis3_dev.count, 0);
+ data = atomic_xchg(&lis3->count, 0);
if (data)
break;
@@ -577,22 +613,28 @@
out:
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&lis3_dev.misc_wait, &wait);
+ remove_wait_queue(&lis3->misc_wait, &wait);
return retval;
}
static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
{
- poll_wait(file, &lis3_dev.misc_wait, wait);
- if (atomic_read(&lis3_dev.count))
+ struct lis3lv02d *lis3 = container_of(file->private_data,
+ struct lis3lv02d, miscdev);
+
+ poll_wait(file, &lis3->misc_wait, wait);
+ if (atomic_read(&lis3->count))
return POLLIN | POLLRDNORM;
return 0;
}
static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
{
- return fasync_helper(fd, file, on, &lis3_dev.async_queue);
+ struct lis3lv02d *lis3 = container_of(file->private_data,
+ struct lis3lv02d, miscdev);
+
+ return fasync_helper(fd, file, on, &lis3->async_queue);
}
static const struct file_operations lis3lv02d_misc_fops = {
@@ -605,85 +647,80 @@
.fasync = lis3lv02d_misc_fasync,
};
-static struct miscdevice lis3lv02d_misc_device = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = "freefall",
- .fops = &lis3lv02d_misc_fops,
-};
-
-int lis3lv02d_joystick_enable(void)
+int lis3lv02d_joystick_enable(struct lis3lv02d *lis3)
{
struct input_dev *input_dev;
int err;
int max_val, fuzz, flat;
int btns[] = {BTN_X, BTN_Y, BTN_Z};
- if (lis3_dev.idev)
+ if (lis3->idev)
return -EINVAL;
- lis3_dev.idev = input_allocate_polled_device();
- if (!lis3_dev.idev)
+ lis3->idev = input_allocate_polled_device();
+ if (!lis3->idev)
return -ENOMEM;
- lis3_dev.idev->poll = lis3lv02d_joystick_poll;
- lis3_dev.idev->open = lis3lv02d_joystick_open;
- lis3_dev.idev->close = lis3lv02d_joystick_close;
- lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
- lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN;
- lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX;
- input_dev = lis3_dev.idev->input;
+ lis3->idev->poll = lis3lv02d_joystick_poll;
+ lis3->idev->open = lis3lv02d_joystick_open;
+ lis3->idev->close = lis3lv02d_joystick_close;
+ lis3->idev->poll_interval = MDPS_POLL_INTERVAL;
+ lis3->idev->poll_interval_min = MDPS_POLL_MIN;
+ lis3->idev->poll_interval_max = MDPS_POLL_MAX;
+ lis3->idev->private = lis3;
+ input_dev = lis3->idev->input;
input_dev->name = "ST LIS3LV02DL Accelerometer";
input_dev->phys = DRIVER_NAME "/input0";
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0;
- input_dev->dev.parent = &lis3_dev.pdev->dev;
+ input_dev->dev.parent = &lis3->pdev->dev;
set_bit(EV_ABS, input_dev->evbit);
- max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY;
- if (lis3_dev.whoami == WAI_12B) {
+ max_val = (lis3->mdps_max_val * lis3->scale) / LIS3_ACCURACY;
+ if (lis3->whoami == WAI_12B) {
fuzz = LIS3_DEFAULT_FUZZ_12B;
flat = LIS3_DEFAULT_FLAT_12B;
} else {
fuzz = LIS3_DEFAULT_FUZZ_8B;
flat = LIS3_DEFAULT_FLAT_8B;
}
- fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY;
- flat = (flat * lis3_dev.scale) / LIS3_ACCURACY;
+ fuzz = (fuzz * lis3->scale) / LIS3_ACCURACY;
+ flat = (flat * lis3->scale) / LIS3_ACCURACY;
input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat);
input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat);
input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat);
- lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns);
- lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns);
- lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns);
+ lis3->mapped_btns[0] = lis3lv02d_get_axis(abs(lis3->ac.x), btns);
+ lis3->mapped_btns[1] = lis3lv02d_get_axis(abs(lis3->ac.y), btns);
+ lis3->mapped_btns[2] = lis3lv02d_get_axis(abs(lis3->ac.z), btns);
- err = input_register_polled_device(lis3_dev.idev);
+ err = input_register_polled_device(lis3->idev);
if (err) {
- input_free_polled_device(lis3_dev.idev);
- lis3_dev.idev = NULL;
+ input_free_polled_device(lis3->idev);
+ lis3->idev = NULL;
}
return err;
}
EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable);
-void lis3lv02d_joystick_disable(void)
+void lis3lv02d_joystick_disable(struct lis3lv02d *lis3)
{
- if (lis3_dev.irq)
- free_irq(lis3_dev.irq, &lis3_dev);
- if (lis3_dev.pdata && lis3_dev.pdata->irq2)
- free_irq(lis3_dev.pdata->irq2, &lis3_dev);
+ if (lis3->irq)
+ free_irq(lis3->irq, lis3);
+ if (lis3->pdata && lis3->pdata->irq2)
+ free_irq(lis3->pdata->irq2, lis3);
- if (!lis3_dev.idev)
+ if (!lis3->idev)
return;
- if (lis3_dev.irq)
- misc_deregister(&lis3lv02d_misc_device);
- input_unregister_polled_device(lis3_dev.idev);
- input_free_polled_device(lis3_dev.idev);
- lis3_dev.idev = NULL;
+ if (lis3->irq)
+ misc_deregister(&lis3->miscdev);
+ input_unregister_polled_device(lis3->idev);
+ input_free_polled_device(lis3->idev);
+ lis3->idev = NULL;
}
EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
@@ -708,6 +745,7 @@
static ssize_t lis3lv02d_selftest_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct lis3lv02d *lis3 = dev_get_drvdata(dev);
s16 values[3];
static const char ok[] = "OK";
@@ -715,8 +753,8 @@
static const char irq[] = "FAIL_IRQ";
const char *res;
- lis3lv02d_sysfs_poweron(&lis3_dev);
- switch (lis3lv02d_selftest(&lis3_dev, values)) {
+ lis3lv02d_sysfs_poweron(lis3);
+ switch (lis3lv02d_selftest(lis3, values)) {
case SELFTEST_FAIL:
res = fail;
break;
@@ -735,33 +773,37 @@
static ssize_t lis3lv02d_position_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct lis3lv02d *lis3 = dev_get_drvdata(dev);
int x, y, z;
- lis3lv02d_sysfs_poweron(&lis3_dev);
- mutex_lock(&lis3_dev.mutex);
- lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
- mutex_unlock(&lis3_dev.mutex);
+ lis3lv02d_sysfs_poweron(lis3);
+ mutex_lock(&lis3->mutex);
+ lis3lv02d_get_xyz(lis3, &x, &y, &z);
+ mutex_unlock(&lis3->mutex);
return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
}
static ssize_t lis3lv02d_rate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- lis3lv02d_sysfs_poweron(&lis3_dev);
- return sprintf(buf, "%d\n", lis3lv02d_get_odr());
+ struct lis3lv02d *lis3 = dev_get_drvdata(dev);
+
+ lis3lv02d_sysfs_poweron(lis3);
+ return sprintf(buf, "%d\n", lis3lv02d_get_odr(lis3));
}
static ssize_t lis3lv02d_rate_set(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
+ struct lis3lv02d *lis3 = dev_get_drvdata(dev);
unsigned long rate;
if (strict_strtoul(buf, 0, &rate))
return -EINVAL;
- lis3lv02d_sysfs_poweron(&lis3_dev);
- if (lis3lv02d_set_odr(rate))
+ lis3lv02d_sysfs_poweron(lis3);
+ if (lis3lv02d_set_odr(lis3, rate))
return -EINVAL;
return count;
@@ -790,6 +832,7 @@
if (IS_ERR(lis3->pdev))
return PTR_ERR(lis3->pdev);
+ platform_set_drvdata(lis3->pdev, lis3);
return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
}
@@ -803,7 +846,7 @@
/* SYSFS may have left chip running. Turn off if necessary */
if (!pm_runtime_suspended(lis3->pm_dev))
- lis3lv02d_poweroff(&lis3_dev);
+ lis3lv02d_poweroff(lis3);
pm_runtime_disable(lis3->pm_dev);
pm_runtime_set_suspended(lis3->pm_dev);
@@ -813,24 +856,24 @@
}
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
-static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
+static void lis3lv02d_8b_configure(struct lis3lv02d *lis3,
struct lis3lv02d_platform_data *p)
{
int err;
int ctrl2 = p->hipass_ctrl;
if (p->click_flags) {
- dev->write(dev, CLICK_CFG, p->click_flags);
- dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit);
- dev->write(dev, CLICK_LATENCY, p->click_latency);
- dev->write(dev, CLICK_WINDOW, p->click_window);
- dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf);
- dev->write(dev, CLICK_THSY_X,
+ lis3->write(lis3, CLICK_CFG, p->click_flags);
+ lis3->write(lis3, CLICK_TIMELIMIT, p->click_time_limit);
+ lis3->write(lis3, CLICK_LATENCY, p->click_latency);
+ lis3->write(lis3, CLICK_WINDOW, p->click_window);
+ lis3->write(lis3, CLICK_THSZ, p->click_thresh_z & 0xf);
+ lis3->write(lis3, CLICK_THSY_X,
(p->click_thresh_x & 0xf) |
(p->click_thresh_y << 4));
- if (dev->idev) {
- struct input_dev *input_dev = lis3_dev.idev->input;
+ if (lis3->idev) {
+ struct input_dev *input_dev = lis3->idev->input;
input_set_capability(input_dev, EV_KEY, BTN_X);
input_set_capability(input_dev, EV_KEY, BTN_Y);
input_set_capability(input_dev, EV_KEY, BTN_Z);
@@ -838,22 +881,22 @@
}
if (p->wakeup_flags) {
- dev->write(dev, FF_WU_CFG_1, p->wakeup_flags);
- dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f);
+ lis3->write(lis3, FF_WU_CFG_1, p->wakeup_flags);
+ lis3->write(lis3, FF_WU_THS_1, p->wakeup_thresh & 0x7f);
/* pdata value + 1 to keep this backward compatible*/
- dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1);
+ lis3->write(lis3, FF_WU_DURATION_1, p->duration1 + 1);
ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/
}
if (p->wakeup_flags2) {
- dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2);
- dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f);
+ lis3->write(lis3, FF_WU_CFG_2, p->wakeup_flags2);
+ lis3->write(lis3, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f);
/* pdata value + 1 to keep this backward compatible*/
- dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1);
+ lis3->write(lis3, FF_WU_DURATION_2, p->duration2 + 1);
ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/
}
/* Configure hipass filters */
- dev->write(dev, CTRL_REG2, ctrl2);
+ lis3->write(lis3, CTRL_REG2, ctrl2);
if (p->irq2) {
err = request_threaded_irq(p->irq2,
@@ -861,7 +904,7 @@
lis302dl_interrupt_thread2_8b,
IRQF_TRIGGER_RISING | IRQF_ONESHOT |
(p->irq_flags2 & IRQF_TRIGGER_MASK),
- DRIVER_NAME, &lis3_dev);
+ DRIVER_NAME, lis3);
if (err < 0)
pr_err("No second IRQ. Limited functionality\n");
}
@@ -871,93 +914,97 @@
* Initialise the accelerometer and the various subsystems.
* Should be rather independent of the bus system.
*/
-int lis3lv02d_init_device(struct lis3lv02d *dev)
+int lis3lv02d_init_device(struct lis3lv02d *lis3)
{
int err;
irq_handler_t thread_fn;
int irq_flags = 0;
- dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
+ lis3->whoami = lis3lv02d_read_8(lis3, WHO_AM_I);
- switch (dev->whoami) {
+ switch (lis3->whoami) {
case WAI_12B:
pr_info("12 bits sensor found\n");
- dev->read_data = lis3lv02d_read_12;
- dev->mdps_max_val = 2048;
- dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
- dev->odrs = lis3_12_rates;
- dev->odr_mask = CTRL1_DF0 | CTRL1_DF1;
- dev->scale = LIS3_SENSITIVITY_12B;
- dev->regs = lis3_wai12_regs;
- dev->regs_size = ARRAY_SIZE(lis3_wai12_regs);
+ lis3->read_data = lis3lv02d_read_12;
+ lis3->mdps_max_val = 2048;
+ lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
+ lis3->odrs = lis3_12_rates;
+ lis3->odr_mask = CTRL1_DF0 | CTRL1_DF1;
+ lis3->scale = LIS3_SENSITIVITY_12B;
+ lis3->regs = lis3_wai12_regs;
+ lis3->regs_size = ARRAY_SIZE(lis3_wai12_regs);
break;
case WAI_8B:
pr_info("8 bits sensor found\n");
- dev->read_data = lis3lv02d_read_8;
- dev->mdps_max_val = 128;
- dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
- dev->odrs = lis3_8_rates;
- dev->odr_mask = CTRL1_DR;
- dev->scale = LIS3_SENSITIVITY_8B;
- dev->regs = lis3_wai8_regs;
- dev->regs_size = ARRAY_SIZE(lis3_wai8_regs);
+ lis3->read_data = lis3lv02d_read_8;
+ lis3->mdps_max_val = 128;
+ lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+ lis3->odrs = lis3_8_rates;
+ lis3->odr_mask = CTRL1_DR;
+ lis3->scale = LIS3_SENSITIVITY_8B;
+ lis3->regs = lis3_wai8_regs;
+ lis3->regs_size = ARRAY_SIZE(lis3_wai8_regs);
break;
case WAI_3DC:
pr_info("8 bits 3DC sensor found\n");
- dev->read_data = lis3lv02d_read_8;
- dev->mdps_max_val = 128;
- dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
- dev->odrs = lis3_3dc_rates;
- dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
- dev->scale = LIS3_SENSITIVITY_8B;
+ lis3->read_data = lis3lv02d_read_8;
+ lis3->mdps_max_val = 128;
+ lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+ lis3->odrs = lis3_3dc_rates;
+ lis3->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
+ lis3->scale = LIS3_SENSITIVITY_8B;
break;
default:
- pr_err("unknown sensor type 0x%X\n", dev->whoami);
+ pr_err("unknown sensor type 0x%X\n", lis3->whoami);
return -EINVAL;
}
- dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs),
+ lis3->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs),
sizeof(lis3_wai12_regs)), GFP_KERNEL);
- if (dev->reg_cache == NULL) {
+ if (lis3->reg_cache == NULL) {
printk(KERN_ERR DRIVER_NAME "out of memory\n");
return -ENOMEM;
}
- mutex_init(&dev->mutex);
- atomic_set(&dev->wake_thread, 0);
+ mutex_init(&lis3->mutex);
+ atomic_set(&lis3->wake_thread, 0);
- lis3lv02d_add_fs(dev);
- lis3lv02d_poweron(dev);
-
- if (dev->pm_dev) {
- pm_runtime_set_active(dev->pm_dev);
- pm_runtime_enable(dev->pm_dev);
+ lis3lv02d_add_fs(lis3);
+ err = lis3lv02d_poweron(lis3);
+ if (err) {
+ lis3lv02d_remove_fs(lis3);
+ return err;
}
- if (lis3lv02d_joystick_enable())
+ if (lis3->pm_dev) {
+ pm_runtime_set_active(lis3->pm_dev);
+ pm_runtime_enable(lis3->pm_dev);
+ }
+
+ if (lis3lv02d_joystick_enable(lis3))
pr_err("joystick initialization failed\n");
/* passing in platform specific data is purely optional and only
* used by the SPI transport layer at the moment */
- if (dev->pdata) {
- struct lis3lv02d_platform_data *p = dev->pdata;
+ if (lis3->pdata) {
+ struct lis3lv02d_platform_data *p = lis3->pdata;
- if (dev->whoami == WAI_8B)
- lis3lv02d_8b_configure(dev, p);
+ if (lis3->whoami == WAI_8B)
+ lis3lv02d_8b_configure(lis3, p);
irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK;
- dev->irq_cfg = p->irq_cfg;
+ lis3->irq_cfg = p->irq_cfg;
if (p->irq_cfg)
- dev->write(dev, CTRL_REG3, p->irq_cfg);
+ lis3->write(lis3, CTRL_REG3, p->irq_cfg);
if (p->default_rate)
- lis3lv02d_set_odr(p->default_rate);
+ lis3lv02d_set_odr(lis3, p->default_rate);
}
/* bail if we did not get an IRQ from the bus layer */
- if (!dev->irq) {
+ if (!lis3->irq) {
pr_debug("No IRQ. Disabling /dev/freefall\n");
goto out;
}
@@ -973,23 +1020,27 @@
* io-apic is not configurable (and generates a warning) but I keep it
* in case of support for other hardware.
*/
- if (dev->pdata && dev->whoami == WAI_8B)
+ if (lis3->pdata && lis3->whoami == WAI_8B)
thread_fn = lis302dl_interrupt_thread1_8b;
else
thread_fn = NULL;
- err = request_threaded_irq(dev->irq, lis302dl_interrupt,
+ err = request_threaded_irq(lis3->irq, lis302dl_interrupt,
thread_fn,
IRQF_TRIGGER_RISING | IRQF_ONESHOT |
irq_flags,
- DRIVER_NAME, &lis3_dev);
+ DRIVER_NAME, lis3);
if (err < 0) {
pr_err("Cannot get IRQ\n");
goto out;
}
- if (misc_register(&lis3lv02d_misc_device))
+ lis3->miscdev.minor = MISC_DYNAMIC_MINOR;
+ lis3->miscdev.name = "freefall";
+ lis3->miscdev.fops = &lis3lv02d_misc_fops;
+
+ if (misc_register(&lis3->miscdev))
pr_err("misc_register failed\n");
out:
return 0;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
index a193958..2b1482a 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.h
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
#include <linux/regulator/consumer.h>
+#include <linux/miscdevice.h>
/*
* This driver tries to support the "digital" accelerometer chips from
@@ -273,6 +274,8 @@
struct fasync_struct *async_queue; /* queue for the misc device */
wait_queue_head_t misc_wait; /* Wait queue for the misc device */
unsigned long misc_opened; /* bit0: whether the device is open */
+ struct miscdevice miscdev;
+
int data_ready_count[2];
atomic_t wake_thread;
unsigned char irq_cfg;
@@ -282,10 +285,10 @@
};
int lis3lv02d_init_device(struct lis3lv02d *lis3);
-int lis3lv02d_joystick_enable(void);
-void lis3lv02d_joystick_disable(void);
+int lis3lv02d_joystick_enable(struct lis3lv02d *lis3);
+void lis3lv02d_joystick_disable(struct lis3lv02d *lis3);
void lis3lv02d_poweroff(struct lis3lv02d *lis3);
-void lis3lv02d_poweron(struct lis3lv02d *lis3);
+int lis3lv02d_poweron(struct lis3lv02d *lis3);
int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
extern struct lis3lv02d lis3_dev;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
index b20dfb4..c02fea0 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -79,8 +79,7 @@
u8 reg;
int ret;
- if (lis3->reg_ctrl)
- lis3_reg_ctrl(lis3, LIS3_REG_ON);
+ lis3_reg_ctrl(lis3, LIS3_REG_ON);
lis3->read(lis3, WHO_AM_I, ®);
if (reg != lis3->whoami)
@@ -106,10 +105,6 @@
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
if (pdata) {
- /* Regulator control is optional */
- if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL)
- lis3_dev.reg_ctrl = lis3_reg_ctrl;
-
if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
(i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_I2C_BLOCK)))
@@ -131,15 +126,13 @@
goto fail;
}
- if (lis3_dev.reg_ctrl) {
- lis3_dev.regulators[0].supply = reg_vdd;
- lis3_dev.regulators[1].supply = reg_vdd_io;
- ret = regulator_bulk_get(&client->dev,
- ARRAY_SIZE(lis3_dev.regulators),
- lis3_dev.regulators);
- if (ret < 0)
- goto fail;
- }
+ lis3_dev.regulators[0].supply = reg_vdd;
+ lis3_dev.regulators[1].supply = reg_vdd_io;
+ ret = regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(lis3_dev.regulators),
+ lis3_dev.regulators);
+ if (ret < 0)
+ goto fail;
lis3_dev.pdata = pdata;
lis3_dev.bus_priv = client;
@@ -153,16 +146,19 @@
i2c_set_clientdata(client, &lis3_dev);
/* Provide power over the init call */
- if (lis3_dev.reg_ctrl)
- lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
+ lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
ret = lis3lv02d_init_device(&lis3_dev);
- if (lis3_dev.reg_ctrl)
- lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
+ lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
- if (ret == 0)
- return 0;
+ if (ret)
+ goto fail2;
+ return 0;
+
+fail2:
+ regulator_bulk_free(ARRAY_SIZE(lis3_dev.regulators),
+ lis3_dev.regulators);
fail:
if (pdata && pdata->release_resources)
pdata->release_resources();
@@ -177,12 +173,11 @@
if (pdata && pdata->release_resources)
pdata->release_resources();
- lis3lv02d_joystick_disable();
+ lis3lv02d_joystick_disable(lis3);
lis3lv02d_remove_fs(&lis3_dev);
- if (lis3_dev.reg_ctrl)
- regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
- lis3_dev.regulators);
+ regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
+ lis3_dev.regulators);
return 0;
}
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
index c1f8a8f..b2c1be1 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_spi.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -83,7 +83,7 @@
static int __devexit lis302dl_spi_remove(struct spi_device *spi)
{
struct lis3lv02d *lis3 = spi_get_drvdata(spi);
- lis3lv02d_joystick_disable();
+ lis3lv02d_joystick_disable(lis3);
lis3lv02d_poweroff(lis3);
return lis3lv02d_remove_fs(&lis3_dev);
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 053d36c..cd41d40 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -151,7 +151,7 @@
struct vmballoon_stats {
unsigned int timer;
- /* allocation statustics */
+ /* allocation statistics */
unsigned int alloc;
unsigned int alloc_fail;
unsigned int sleep_alloc;
@@ -412,6 +412,7 @@
gfp_t flags;
unsigned int hv_status;
bool locked = false;
+ flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
do {
if (!can_sleep)
@@ -419,7 +420,6 @@
else
STATS_INC(b->stats.sleep_alloc);
- flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
page = alloc_page(flags);
if (!page) {
if (!can_sleep)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 4c1a648..a1cb21f 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -94,6 +94,11 @@
unsigned int read_only;
unsigned int part_type;
unsigned int name_idx;
+ unsigned int reset_done;
+#define MMC_BLK_READ BIT(0)
+#define MMC_BLK_WRITE BIT(1)
+#define MMC_BLK_DISCARD BIT(2)
+#define MMC_BLK_SECDISCARD BIT(3)
/*
* Only set in main mmc_blk_data associated
@@ -109,11 +114,11 @@
enum mmc_blk_status {
MMC_BLK_SUCCESS = 0,
MMC_BLK_PARTIAL,
- MMC_BLK_RETRY,
- MMC_BLK_RETRY_SINGLE,
- MMC_BLK_DATA_ERR,
MMC_BLK_CMD_ERR,
+ MMC_BLK_RETRY,
MMC_BLK_ABORT,
+ MMC_BLK_DATA_ERR,
+ MMC_BLK_ECC_ERR,
};
module_param(perdev_minors, int, 0444);
@@ -291,7 +296,7 @@
struct mmc_card *card;
struct mmc_command cmd = {0};
struct mmc_data data = {0};
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct scatterlist sg;
int err;
@@ -442,19 +447,24 @@
{
int ret;
struct mmc_blk_data *main_md = mmc_get_drvdata(card);
+
if (main_md->part_curr == md->part_type)
return 0;
if (mmc_card_mmc(card)) {
- card->ext_csd.part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
- card->ext_csd.part_config |= md->part_type;
+ u8 part_config = card->ext_csd.part_config;
+
+ part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
+ part_config |= md->part_type;
ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_PART_CONFIG, card->ext_csd.part_config,
+ EXT_CSD_PART_CONFIG, part_config,
card->ext_csd.part_time);
if (ret)
return ret;
-}
+
+ card->ext_csd.part_config = part_config;
+ }
main_md->part_curr = md->part_type;
return 0;
@@ -466,7 +476,7 @@
u32 result;
__be32 *blocks;
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
unsigned int timeout_us;
@@ -616,7 +626,7 @@
* Otherwise we don't understand what happened, so abort.
*/
static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
- struct mmc_blk_request *brq)
+ struct mmc_blk_request *brq, int *ecc_err)
{
bool prev_cmd_status_valid = true;
u32 status, stop_status = 0;
@@ -641,6 +651,12 @@
if (err)
return ERR_ABORT;
+ /* Flag ECC errors */
+ if ((status & R1_CARD_ECC_FAILED) ||
+ (brq->stop.resp[0] & R1_CARD_ECC_FAILED) ||
+ (brq->cmd.resp[0] & R1_CARD_ECC_FAILED))
+ *ecc_err = 1;
+
/*
* Check the current card state. If it is in some data transfer
* mode, tell it to stop (and hopefully transition back to TRAN.)
@@ -658,6 +674,8 @@
*/
if (err)
return ERR_ABORT;
+ if (stop_status & R1_CARD_ECC_FAILED)
+ *ecc_err = 1;
}
/* Check for set block count errors */
@@ -670,6 +688,10 @@
return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error,
prev_cmd_status_valid, status);
+ /* Data errors */
+ if (!brq->stop.error)
+ return ERR_CONTINUE;
+
/* Now for stop errors. These aren't fatal to the transfer. */
pr_err("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
req->rq_disk->disk_name, brq->stop.error,
@@ -686,12 +708,45 @@
return ERR_CONTINUE;
}
+static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host,
+ int type)
+{
+ int err;
+
+ if (md->reset_done & type)
+ return -EEXIST;
+
+ md->reset_done |= type;
+ err = mmc_hw_reset(host);
+ /* Ensure we switch back to the correct partition */
+ if (err != -EOPNOTSUPP) {
+ struct mmc_blk_data *main_md = mmc_get_drvdata(host->card);
+ int part_err;
+
+ main_md->part_curr = main_md->part_type;
+ part_err = mmc_blk_part_switch(host->card, md);
+ if (part_err) {
+ /*
+ * We have failed to get back into the correct
+ * partition, so we need to abort the whole request.
+ */
+ return -ENODEV;
+ }
+ }
+ return err;
+}
+
+static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type)
+{
+ md->reset_done &= ~type;
+}
+
static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
unsigned int from, nr, arg;
- int err = 0;
+ int err = 0, type = MMC_BLK_DISCARD;
if (!mmc_can_erase(card)) {
err = -EOPNOTSUPP;
@@ -701,11 +756,13 @@
from = blk_rq_pos(req);
nr = blk_rq_sectors(req);
- if (mmc_can_trim(card))
+ if (mmc_can_discard(card))
+ arg = MMC_DISCARD_ARG;
+ else if (mmc_can_trim(card))
arg = MMC_TRIM_ARG;
else
arg = MMC_ERASE_ARG;
-
+retry:
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
INAND_CMD38_ARG_EXT_CSD,
@@ -718,6 +775,10 @@
}
err = mmc_erase(card, from, nr, arg);
out:
+ if (err == -EIO && !mmc_blk_reset(md, card->host, type))
+ goto retry;
+ if (!err)
+ mmc_blk_reset_success(md, type);
spin_lock_irq(&md->lock);
__blk_end_request(req, err, blk_rq_bytes(req));
spin_unlock_irq(&md->lock);
@@ -731,13 +792,20 @@
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
unsigned int from, nr, arg;
- int err = 0;
+ int err = 0, type = MMC_BLK_SECDISCARD;
- if (!mmc_can_secure_erase_trim(card)) {
+ if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) {
err = -EOPNOTSUPP;
goto out;
}
+ /* The sanitize operation is supported at v4.5 only */
+ if (mmc_can_sanitize(card)) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_SANITIZE_START, 1, 0);
+ goto out;
+ }
+
from = blk_rq_pos(req);
nr = blk_rq_sectors(req);
@@ -745,7 +813,7 @@
arg = MMC_SECURE_TRIM1_ARG;
else
arg = MMC_SECURE_ERASE_ARG;
-
+retry:
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
INAND_CMD38_ARG_EXT_CSD,
@@ -769,6 +837,10 @@
err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG);
}
out:
+ if (err == -EIO && !mmc_blk_reset(md, card->host, type))
+ goto retry;
+ if (!err)
+ mmc_blk_reset_success(md, type);
spin_lock_irq(&md->lock);
__blk_end_request(req, err, blk_rq_bytes(req));
spin_unlock_irq(&md->lock);
@@ -779,16 +851,18 @@
static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->data;
+ struct mmc_card *card = md->queue.card;
+ int ret = 0;
- /*
- * No-op, only service this because we need REQ_FUA for reliable
- * writes.
- */
+ ret = mmc_flush_cache(card);
+ if (ret)
+ ret = -EIO;
+
spin_lock_irq(&md->lock);
- __blk_end_request_all(req, 0);
+ __blk_end_request_all(req, ret);
spin_unlock_irq(&md->lock);
- return 1;
+ return ret ? 0 : 1;
}
/*
@@ -825,11 +899,11 @@
static int mmc_blk_err_check(struct mmc_card *card,
struct mmc_async_req *areq)
{
- enum mmc_blk_status ret = MMC_BLK_SUCCESS;
struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req,
mmc_active);
struct mmc_blk_request *brq = &mq_mrq->brq;
struct request *req = mq_mrq->req;
+ int ecc_err = 0;
/*
* sbc.error indicates a problem with the set block count
@@ -841,8 +915,9 @@
* stop.error indicates a problem with the stop command. Data
* may have been transferred, or may still be transferring.
*/
- if (brq->sbc.error || brq->cmd.error || brq->stop.error) {
- switch (mmc_blk_cmd_recovery(card, req, brq)) {
+ if (brq->sbc.error || brq->cmd.error || brq->stop.error ||
+ brq->data.error) {
+ switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err)) {
case ERR_RETRY:
return MMC_BLK_RETRY;
case ERR_ABORT:
@@ -873,7 +948,7 @@
do {
int err = get_card_status(card, &status, 5);
if (err) {
- printk(KERN_ERR "%s: error %d requesting status\n",
+ pr_err("%s: error %d requesting status\n",
req->rq_disk->disk_name, err);
return MMC_BLK_CMD_ERR;
}
@@ -894,23 +969,21 @@
brq->cmd.resp[0], brq->stop.resp[0]);
if (rq_data_dir(req) == READ) {
- if (brq->data.blocks > 1) {
- /* Redo read one sector at a time */
- pr_warning("%s: retrying using single block read\n",
- req->rq_disk->disk_name);
- return MMC_BLK_RETRY_SINGLE;
- }
+ if (ecc_err)
+ return MMC_BLK_ECC_ERR;
return MMC_BLK_DATA_ERR;
} else {
return MMC_BLK_CMD_ERR;
}
}
- if (ret == MMC_BLK_SUCCESS &&
- blk_rq_bytes(req) != brq->data.bytes_xfered)
- ret = MMC_BLK_PARTIAL;
+ if (!brq->data.bytes_xfered)
+ return MMC_BLK_RETRY;
- return ret;
+ if (blk_rq_bytes(req) != brq->data.bytes_xfered)
+ return MMC_BLK_PARTIAL;
+
+ return MMC_BLK_SUCCESS;
}
static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
@@ -957,13 +1030,20 @@
if (brq->data.blocks > card->host->max_blk_count)
brq->data.blocks = card->host->max_blk_count;
- /*
- * After a read error, we redo the request one sector at a time
- * in order to accurately determine which sectors can be read
- * successfully.
- */
- if (disable_multi && brq->data.blocks > 1)
- brq->data.blocks = 1;
+ if (brq->data.blocks > 1) {
+ /*
+ * After a read error, we redo the request one sector
+ * at a time in order to accurately determine which
+ * sectors can be read successfully.
+ */
+ if (disable_multi)
+ brq->data.blocks = 1;
+
+ /* Some controllers can't do multiblock reads due to hw bugs */
+ if (card->host->caps2 & MMC_CAP2_NO_MULTI_READ &&
+ rq_data_dir(req) == READ)
+ brq->data.blocks = 1;
+ }
if (brq->data.blocks > 1 || do_rel_wr) {
/* SPI multiblock writes terminate using a special
@@ -1049,12 +1129,41 @@
mmc_queue_bounce_pre(mqrq);
}
+static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
+ struct mmc_blk_request *brq, struct request *req,
+ int ret)
+{
+ /*
+ * If this is an SD card and we're writing, we can first
+ * mark the known good sectors as ok.
+ *
+ * If the card is not SD, we can still ok written sectors
+ * as reported by the controller (which might be less than
+ * the real number of written sectors, but never more).
+ */
+ if (mmc_card_sd(card)) {
+ u32 blocks;
+
+ blocks = mmc_sd_num_wr_blocks(card);
+ if (blocks != (u32)-1) {
+ spin_lock_irq(&md->lock);
+ ret = __blk_end_request(req, 0, blocks << 9);
+ spin_unlock_irq(&md->lock);
+ }
+ } else {
+ spin_lock_irq(&md->lock);
+ ret = __blk_end_request(req, 0, brq->data.bytes_xfered);
+ spin_unlock_irq(&md->lock);
+ }
+ return ret;
+}
+
static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
{
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
struct mmc_blk_request *brq = &mq->mqrq_cur->brq;
- int ret = 1, disable_multi = 0, retry = 0;
+ int ret = 1, disable_multi = 0, retry = 0, type;
enum mmc_blk_status status;
struct mmc_queue_req *mq_rq;
struct request *req;
@@ -1076,6 +1185,7 @@
mq_rq = container_of(areq, struct mmc_queue_req, mmc_active);
brq = &mq_rq->brq;
req = mq_rq->req;
+ type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE;
mmc_queue_bounce_post(mq_rq);
switch (status) {
@@ -1084,18 +1194,18 @@
/*
* A block was successfully transferred.
*/
+ mmc_blk_reset_success(md, type);
spin_lock_irq(&md->lock);
ret = __blk_end_request(req, 0,
brq->data.bytes_xfered);
spin_unlock_irq(&md->lock);
+ /*
+ * If the blk_end_request function returns non-zero even
+ * though all data has been transferred and no errors
+ * were returned by the host controller, it's a bug.
+ */
if (status == MMC_BLK_SUCCESS && ret) {
- /*
- * The blk_end_request has returned non zero
- * even though all data is transfered and no
- * erros returned by host.
- * If this happen it's a bug.
- */
- printk(KERN_ERR "%s BUG rq_tot %d d_xfer %d\n",
+ pr_err("%s BUG rq_tot %d d_xfer %d\n",
__func__, blk_rq_bytes(req),
brq->data.bytes_xfered);
rqc = NULL;
@@ -1103,16 +1213,36 @@
}
break;
case MMC_BLK_CMD_ERR:
- goto cmd_err;
- case MMC_BLK_RETRY_SINGLE:
- disable_multi = 1;
- break;
+ ret = mmc_blk_cmd_err(md, card, brq, req, ret);
+ if (!mmc_blk_reset(md, card->host, type))
+ break;
+ goto cmd_abort;
case MMC_BLK_RETRY:
if (retry++ < 5)
break;
+ /* Fall through */
case MMC_BLK_ABORT:
+ if (!mmc_blk_reset(md, card->host, type))
+ break;
goto cmd_abort;
- case MMC_BLK_DATA_ERR:
+ case MMC_BLK_DATA_ERR: {
+ int err;
+
+ err = mmc_blk_reset(md, card->host, type);
+ if (!err)
+ break;
+ if (err == -ENODEV)
+ goto cmd_abort;
+ /* Fall through */
+ }
+ case MMC_BLK_ECC_ERR:
+ if (brq->data.blocks > 1) {
+ /* Redo read one sector at a time */
+ pr_warning("%s: retrying using single block read\n",
+ req->rq_disk->disk_name);
+ disable_multi = 1;
+ break;
+ }
/*
* After an error, we redo I/O one sector at a
* time, so we only reach here after trying to
@@ -1129,7 +1259,7 @@
if (ret) {
/*
- * In case of a none complete request
+ * In case of a incomplete request
* prepare it again and resend.
*/
mmc_blk_rw_rq_prep(mq_rq, card, disable_multi, mq);
@@ -1139,30 +1269,6 @@
return 1;
- cmd_err:
- /*
- * If this is an SD card and we're writing, we can first
- * mark the known good sectors as ok.
- *
- * If the card is not SD, we can still ok written sectors
- * as reported by the controller (which might be less than
- * the real number of written sectors, but never more).
- */
- if (mmc_card_sd(card)) {
- u32 blocks;
-
- blocks = mmc_sd_num_wr_blocks(card);
- if (blocks != (u32)-1) {
- spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0, blocks << 9);
- spin_unlock_irq(&md->lock);
- }
- } else {
- spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0, brq->data.bytes_xfered);
- spin_unlock_irq(&md->lock);
- }
-
cmd_abort:
spin_lock_irq(&md->lock);
while (ret)
@@ -1190,6 +1296,11 @@
ret = mmc_blk_part_switch(card, md);
if (ret) {
+ if (req) {
+ spin_lock_irq(&md->lock);
+ __blk_end_request_all(req, -EIO);
+ spin_unlock_irq(&md->lock);
+ }
ret = 0;
goto out;
}
@@ -1374,32 +1485,35 @@
string_get_size((u64)get_capacity(part_md->disk) << 9, STRING_UNITS_2,
cap_str, sizeof(cap_str));
- printk(KERN_INFO "%s: %s %s partition %u %s\n",
+ pr_info("%s: %s %s partition %u %s\n",
part_md->disk->disk_name, mmc_card_id(card),
mmc_card_name(card), part_md->part_type, cap_str);
return 0;
}
+/* MMC Physical partitions consist of two boot partitions and
+ * up to four general purpose partitions.
+ * For each partition enabled in EXT_CSD a block device will be allocatedi
+ * to provide access to the partition.
+ */
+
static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md)
{
- int ret = 0;
+ int idx, ret = 0;
if (!mmc_card_mmc(card))
return 0;
- if (card->ext_csd.boot_size) {
- ret = mmc_blk_alloc_part(card, md, EXT_CSD_PART_CONFIG_ACC_BOOT0,
- card->ext_csd.boot_size >> 9,
- true,
- "boot0");
- if (ret)
- return ret;
- ret = mmc_blk_alloc_part(card, md, EXT_CSD_PART_CONFIG_ACC_BOOT1,
- card->ext_csd.boot_size >> 9,
- true,
- "boot1");
- if (ret)
- return ret;
+ for (idx = 0; idx < card->nr_parts; idx++) {
+ if (card->part[idx].size) {
+ ret = mmc_blk_alloc_part(card, md,
+ card->part[idx].part_cfg,
+ card->part[idx].size >> 9,
+ card->part[idx].force_ro,
+ card->part[idx].name);
+ if (ret)
+ return ret;
+ }
}
return ret;
@@ -1415,7 +1529,7 @@
mmc_release_host(card->host);
if (err) {
- printk(KERN_ERR "%s: unable to set block size to 512: %d\n",
+ pr_err("%s: unable to set block size to 512: %d\n",
md->disk->disk_name, err);
return -EINVAL;
}
@@ -1517,7 +1631,7 @@
string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
cap_str, sizeof(cap_str));
- printk(KERN_INFO "%s: %s %s %s %s\n",
+ pr_info("%s: %s %s %s %s\n",
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
cap_str, md->read_only ? "(ro)" : "");
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 2bf229a..b038c4a 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#define RESULT_OK 0
#define RESULT_FAIL 1
@@ -250,7 +251,7 @@
if (!busy && mmc_test_busy(&cmd)) {
busy = 1;
if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
- printk(KERN_INFO "%s: Warning: Host did not "
+ pr_info("%s: Warning: Host did not "
"wait for busy state to end.\n",
mmc_hostname(test->card->host));
}
@@ -552,7 +553,7 @@
rate = mmc_test_rate(bytes, &ts);
iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
- printk(KERN_INFO "%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
+ pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
"seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
mmc_hostname(test->card->host), sectors, sectors >> 1,
(sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
@@ -578,7 +579,7 @@
rate = mmc_test_rate(tot, &ts);
iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
- printk(KERN_INFO "%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
+ pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
"%lu.%09lu seconds (%u kB/s, %u KiB/s, "
"%u.%02u IOPS, sg_len %d)\n",
mmc_hostname(test->card->host), count, sectors, count,
@@ -1408,7 +1409,7 @@
static int mmc_test_no_highmem(struct mmc_test_card *test)
{
- printk(KERN_INFO "%s: Highmem not configured - test skipped\n",
+ pr_info("%s: Highmem not configured - test skipped\n",
mmc_hostname(test->card->host));
return 0;
}
@@ -1435,7 +1436,7 @@
t->max_seg_sz, &t->sg_len, min_sg_len);
}
if (err)
- printk(KERN_INFO "%s: Failed to map sg list\n",
+ pr_info("%s: Failed to map sg list\n",
mmc_hostname(test->card->host));
return err;
}
@@ -2135,7 +2136,7 @@
return ret;
err:
- printk(KERN_INFO "[%s] error\n", __func__);
+ pr_info("[%s] error\n", __func__);
return ret;
}
@@ -2149,7 +2150,7 @@
if (rw->do_nonblock_req &&
((!pre_req && post_req) || (pre_req && !post_req))) {
- printk(KERN_INFO "error: only one of pre/post is defined\n");
+ pr_info("error: only one of pre/post is defined\n");
return -EINVAL;
}
@@ -2328,6 +2329,31 @@
return mmc_test_rw_multiple_sg_len(test, &test_data);
}
+/*
+ * eMMC hardware reset.
+ */
+static int mmc_test_hw_reset(struct mmc_test_card *test)
+{
+ struct mmc_card *card = test->card;
+ struct mmc_host *host = card->host;
+ int err;
+
+ err = mmc_hw_reset_check(host);
+ if (!err)
+ return RESULT_OK;
+
+ if (err == -ENOSYS)
+ return RESULT_FAIL;
+
+ if (err != -EOPNOTSUPP)
+ return err;
+
+ if (!mmc_can_reset(card))
+ return RESULT_UNSUP_CARD;
+
+ return RESULT_UNSUP_HOST;
+}
+
static const struct mmc_test_case mmc_test_cases[] = {
{
.name = "Basic write (no data verification)",
@@ -2650,6 +2676,11 @@
.run = mmc_test_profile_sglen_r_nonblock_perf,
.cleanup = mmc_test_area_cleanup,
},
+
+ {
+ .name = "eMMC hardware reset",
+ .run = mmc_test_hw_reset,
+ },
};
static DEFINE_MUTEX(mmc_test_lock);
@@ -2660,7 +2691,7 @@
{
int i, ret;
- printk(KERN_INFO "%s: Starting tests of card %s...\n",
+ pr_info("%s: Starting tests of card %s...\n",
mmc_hostname(test->card->host), mmc_card_id(test->card));
mmc_claim_host(test->card->host);
@@ -2671,14 +2702,14 @@
if (testcase && ((i + 1) != testcase))
continue;
- printk(KERN_INFO "%s: Test case %d. %s...\n",
+ pr_info("%s: Test case %d. %s...\n",
mmc_hostname(test->card->host), i + 1,
mmc_test_cases[i].name);
if (mmc_test_cases[i].prepare) {
ret = mmc_test_cases[i].prepare(test);
if (ret) {
- printk(KERN_INFO "%s: Result: Prepare "
+ pr_info("%s: Result: Prepare "
"stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
@@ -2708,25 +2739,25 @@
ret = mmc_test_cases[i].run(test);
switch (ret) {
case RESULT_OK:
- printk(KERN_INFO "%s: Result: OK\n",
+ pr_info("%s: Result: OK\n",
mmc_hostname(test->card->host));
break;
case RESULT_FAIL:
- printk(KERN_INFO "%s: Result: FAILED\n",
+ pr_info("%s: Result: FAILED\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_HOST:
- printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ pr_info("%s: Result: UNSUPPORTED "
"(by host)\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_CARD:
- printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ pr_info("%s: Result: UNSUPPORTED "
"(by card)\n",
mmc_hostname(test->card->host));
break;
default:
- printk(KERN_INFO "%s: Result: ERROR (%d)\n",
+ pr_info("%s: Result: ERROR (%d)\n",
mmc_hostname(test->card->host), ret);
}
@@ -2737,7 +2768,7 @@
if (mmc_test_cases[i].cleanup) {
ret = mmc_test_cases[i].cleanup(test);
if (ret) {
- printk(KERN_INFO "%s: Warning: Cleanup "
+ pr_info("%s: Warning: Cleanup "
"stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
@@ -2747,7 +2778,7 @@
mmc_release_host(test->card->host);
- printk(KERN_INFO "%s: Tests completed.\n",
+ pr_info("%s: Tests completed.\n",
mmc_hostname(test->card->host));
}
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 45fb362..dcad59c 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -108,7 +108,7 @@
wake_up_process(mq->thread);
}
-struct scatterlist *mmc_alloc_sg(int sg_len, int *err)
+static struct scatterlist *mmc_alloc_sg(int sg_len, int *err)
{
struct scatterlist *sg;
@@ -140,7 +140,7 @@
/* granularity must not be greater than max. discard */
if (card->pref_erase > max_discard)
q->limits.discard_granularity = 0;
- if (mmc_can_secure_erase_trim(card))
+ if (mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))
queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q);
}
@@ -197,13 +197,13 @@
if (bouncesz > 512) {
mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_cur->bounce_buf) {
- printk(KERN_WARNING "%s: unable to "
+ pr_warning("%s: unable to "
"allocate bounce cur buffer\n",
mmc_card_name(card));
}
mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_prev->bounce_buf) {
- printk(KERN_WARNING "%s: unable to "
+ pr_warning("%s: unable to "
"allocate bounce prev buffer\n",
mmc_card_name(card));
kfree(mqrq_cur->bounce_buf);
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index c8c9edb..2c151e1 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -1082,7 +1082,7 @@
return -ENOMEM;
if (func->class == SDIO_CLASS_UART) {
- printk(KERN_WARNING "%s: need info on UART class basic setup\n",
+ pr_warning("%s: need info on UART class basic setup\n",
sdio_func_id(func));
kfree(port);
return -ENOSYS;
@@ -1101,23 +1101,23 @@
break;
}
if (!tpl) {
- printk(KERN_WARNING
+ pr_warning(
"%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
sdio_func_id(func));
kfree(port);
return -EINVAL;
}
- printk(KERN_DEBUG "%s: Register ID = 0x%02x, Exp ID = 0x%02x\n",
+ pr_debug("%s: Register ID = 0x%02x, Exp ID = 0x%02x\n",
sdio_func_id(func), tpl->data[2], tpl->data[3]);
port->regs_offset = (tpl->data[4] << 0) |
(tpl->data[5] << 8) |
(tpl->data[6] << 16);
- printk(KERN_DEBUG "%s: regs offset = 0x%x\n",
+ pr_debug("%s: regs offset = 0x%x\n",
sdio_func_id(func), port->regs_offset);
port->uartclk = tpl->data[7] * 115200;
if (port->uartclk == 0)
port->uartclk = 115200;
- printk(KERN_DEBUG "%s: clk %d baudcode %u 4800-div %u\n",
+ pr_debug("%s: clk %d baudcode %u 4800-div %u\n",
sdio_func_id(func), port->uartclk,
tpl->data[7], tpl->data[8] | (tpl->data[9] << 8));
} else {
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 393d817..46b6e84 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -295,7 +295,7 @@
}
if (mmc_host_is_spi(card->host)) {
- printk(KERN_INFO "%s: new %s%s%s card on SPI\n",
+ pr_info("%s: new %s%s%s card on SPI\n",
mmc_hostname(card->host),
mmc_card_highspeed(card) ? "high speed " : "",
mmc_card_ddr_mode(card) ? "DDR " : "",
@@ -334,10 +334,10 @@
if (mmc_card_present(card)) {
if (mmc_host_is_spi(card->host)) {
- printk(KERN_INFO "%s: SPI card removed\n",
+ pr_info("%s: SPI card removed\n",
mmc_hostname(card->host));
} else {
- printk(KERN_INFO "%s: card %04x removed\n",
+ pr_info("%s: card %04x removed\n",
mmc_hostname(card->host), card->rca);
}
device_del(&card->dev);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index b27b940..5278ffb 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -24,6 +24,8 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/suspend.h>
+#include <linux/fault-inject.h>
+#include <linux/random.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
@@ -83,6 +85,43 @@
flush_workqueue(workqueue);
}
+#ifdef CONFIG_FAIL_MMC_REQUEST
+
+/*
+ * Internal function. Inject random data errors.
+ * If mmc_data is NULL no errors are injected.
+ */
+static void mmc_should_fail_request(struct mmc_host *host,
+ struct mmc_request *mrq)
+{
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ static const int data_errors[] = {
+ -ETIMEDOUT,
+ -EILSEQ,
+ -EIO,
+ };
+
+ if (!data)
+ return;
+
+ if (cmd->error || data->error ||
+ !should_fail(&host->fail_mmc_request, data->blksz * data->blocks))
+ return;
+
+ data->error = data_errors[random32() % ARRAY_SIZE(data_errors)];
+ data->bytes_xfered = (random32() % (data->bytes_xfered >> 9)) << 9;
+}
+
+#else /* CONFIG_FAIL_MMC_REQUEST */
+
+static inline void mmc_should_fail_request(struct mmc_host *host,
+ struct mmc_request *mrq)
+{
+}
+
+#endif /* CONFIG_FAIL_MMC_REQUEST */
+
/**
* mmc_request_done - finish processing an MMC request
* @host: MMC host which completed request
@@ -102,13 +141,15 @@
}
if (err && cmd->retries) {
- pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
- mmc_hostname(host), cmd->opcode, err);
-
- cmd->retries--;
- cmd->error = 0;
- host->ops->request(host, mrq);
+ /*
+ * Request starter must handle retries - see
+ * mmc_wait_for_req_done().
+ */
+ if (mrq->done)
+ mrq->done(mrq);
} else {
+ mmc_should_fail_request(host, mrq);
+
led_trigger_event(host->led, LED_OFF);
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
@@ -212,7 +253,21 @@
static void mmc_wait_for_req_done(struct mmc_host *host,
struct mmc_request *mrq)
{
- wait_for_completion(&mrq->completion);
+ struct mmc_command *cmd;
+
+ while (1) {
+ wait_for_completion(&mrq->completion);
+
+ cmd = mrq->cmd;
+ if (!cmd->error || !cmd->retries)
+ break;
+
+ pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
+ mmc_hostname(host), cmd->opcode, cmd->error);
+ cmd->retries--;
+ cmd->error = 0;
+ host->ops->request(host, mrq);
+ }
}
/**
@@ -279,8 +334,14 @@
mmc_wait_for_req_done(host, host->areq->mrq);
err = host->areq->err_check(host->card, host->areq);
if (err) {
+ /* post process the completed failed request */
mmc_post_req(host, host->areq->mrq, 0);
if (areq)
+ /*
+ * Cancel the new prepared request, because
+ * it can't run until the failed
+ * request has been properly handled.
+ */
mmc_post_req(host, areq->mrq, -EINVAL);
host->areq = NULL;
@@ -319,6 +380,63 @@
EXPORT_SYMBOL(mmc_wait_for_req);
/**
+ * mmc_interrupt_hpi - Issue for High priority Interrupt
+ * @card: the MMC card associated with the HPI transfer
+ *
+ * Issued High Priority Interrupt, and check for card status
+ * util out-of prg-state.
+ */
+int mmc_interrupt_hpi(struct mmc_card *card)
+{
+ int err;
+ u32 status;
+
+ BUG_ON(!card);
+
+ if (!card->ext_csd.hpi_en) {
+ pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
+ return 1;
+ }
+
+ mmc_claim_host(card->host);
+ err = mmc_send_status(card, &status);
+ if (err) {
+ pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
+ goto out;
+ }
+
+ /*
+ * If the card status is in PRG-state, we can send the HPI command.
+ */
+ if (R1_CURRENT_STATE(status) == R1_STATE_PRG) {
+ do {
+ /*
+ * We don't know when the HPI command will finish
+ * processing, so we need to resend HPI until out
+ * of prg-state, and keep checking the card status
+ * with SEND_STATUS. If a timeout error occurs when
+ * sending the HPI command, we are already out of
+ * prg-state.
+ */
+ err = mmc_send_hpi_cmd(card, &status);
+ if (err)
+ pr_debug("%s: abort HPI (%d error)\n",
+ mmc_hostname(card->host), err);
+
+ err = mmc_send_status(card, &status);
+ if (err)
+ break;
+ } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
+ } else
+ pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
+
+out:
+ mmc_release_host(card->host);
+ return err;
+}
+EXPORT_SYMBOL(mmc_interrupt_hpi);
+
+/**
* mmc_wait_for_cmd - start a command and wait for completion
* @host: MMC host to start command
* @cmd: MMC command to start
@@ -330,7 +448,7 @@
*/
int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
{
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
WARN_ON(!host->claimed);
@@ -1119,13 +1237,11 @@
bit = fls(host->ocr_avail) - 1;
host->ios.vdd = bit;
- if (mmc_host_is_spi(host)) {
+ if (mmc_host_is_spi(host))
host->ios.chip_select = MMC_CS_HIGH;
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
- } else {
+ else
host->ios.chip_select = MMC_CS_DONTCARE;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- }
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
host->ios.power_mode = MMC_POWER_UP;
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
@@ -1151,13 +1267,45 @@
mmc_host_clk_release(host);
}
-static void mmc_power_off(struct mmc_host *host)
+void mmc_power_off(struct mmc_host *host)
{
+ struct mmc_card *card;
+ unsigned int notify_type;
+ unsigned int timeout;
+ int err;
+
mmc_host_clk_hold(host);
+ card = host->card;
host->ios.clock = 0;
host->ios.vdd = 0;
+ if (card && mmc_card_mmc(card) &&
+ (card->poweroff_notify_state == MMC_POWERED_ON)) {
+
+ if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
+ notify_type = EXT_CSD_POWER_OFF_SHORT;
+ timeout = card->ext_csd.generic_cmd6_time;
+ card->poweroff_notify_state = MMC_POWEROFF_SHORT;
+ } else {
+ notify_type = EXT_CSD_POWER_OFF_LONG;
+ timeout = card->ext_csd.power_off_longtime;
+ card->poweroff_notify_state = MMC_POWEROFF_LONG;
+ }
+
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_POWER_OFF_NOTIFICATION,
+ notify_type, timeout);
+
+ if (err && err != -EBADMSG)
+ pr_err("Device failed to respond within %d poweroff "
+ "time. Forcefully powering down the device\n",
+ timeout);
+
+ /* Set the card state to no notification after the poweroff */
+ card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
+ }
+
/*
* Reset ocr mask to be the highest possible voltage supported for
* this mmc host. This value will be used at next power up.
@@ -1173,6 +1321,13 @@
host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
+ /*
+ * Some configurations, such as the 802.11 SDIO card in the OLPC
+ * XO-1.5, require a short delay after poweroff before the card
+ * can be successfully turned on again.
+ */
+ mmc_delay(1);
+
mmc_host_clk_release(host);
}
@@ -1241,8 +1396,7 @@
}
/*
- * Remove the current bus handler from a host. Assumes that there are
- * no interesting cards left, so the bus is powered down.
+ * Remove the current bus handler from a host.
*/
void mmc_detach_bus(struct mmc_host *host)
{
@@ -1259,8 +1413,6 @@
spin_unlock_irqrestore(&host->lock, flags);
- mmc_power_off(host);
-
mmc_bus_put(host);
}
@@ -1478,9 +1630,9 @@
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- printk(KERN_ERR "mmc_erase: group start error %d, "
+ pr_err("mmc_erase: group start error %d, "
"status %#x\n", err, cmd.resp[0]);
- err = -EINVAL;
+ err = -EIO;
goto out;
}
@@ -1493,9 +1645,9 @@
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- printk(KERN_ERR "mmc_erase: group end error %d, status %#x\n",
+ pr_err("mmc_erase: group end error %d, status %#x\n",
err, cmd.resp[0]);
- err = -EINVAL;
+ err = -EIO;
goto out;
}
@@ -1506,7 +1658,7 @@
cmd.cmd_timeout_ms = mmc_erase_timeout(card, arg, qty);
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n",
+ pr_err("mmc_erase: erase error %d, status %#x\n",
err, cmd.resp[0]);
err = -EIO;
goto out;
@@ -1523,7 +1675,7 @@
/* Do not retry else we can't see errors */
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err || (cmd.resp[0] & 0xFDF92000)) {
- printk(KERN_ERR "error %d requesting status %#x\n",
+ pr_err("error %d requesting status %#x\n",
err, cmd.resp[0]);
err = -EIO;
goto out;
@@ -1614,10 +1766,32 @@
{
if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
return 1;
+ if (mmc_can_discard(card))
+ return 1;
return 0;
}
EXPORT_SYMBOL(mmc_can_trim);
+int mmc_can_discard(struct mmc_card *card)
+{
+ /*
+ * As there's no way to detect the discard support bit at v4.5
+ * use the s/w feature support filed.
+ */
+ if (card->ext_csd.feature_support & MMC_DISCARD_FEATURE)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_discard);
+
+int mmc_can_sanitize(struct mmc_card *card)
+{
+ if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_sanitize);
+
int mmc_can_secure_erase_trim(struct mmc_card *card)
{
if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)
@@ -1727,6 +1901,94 @@
}
EXPORT_SYMBOL(mmc_set_blocklen);
+static void mmc_hw_reset_for_init(struct mmc_host *host)
+{
+ if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
+ return;
+ mmc_host_clk_hold(host);
+ host->ops->hw_reset(host);
+ mmc_host_clk_release(host);
+}
+
+int mmc_can_reset(struct mmc_card *card)
+{
+ u8 rst_n_function;
+
+ if (!mmc_card_mmc(card))
+ return 0;
+ rst_n_function = card->ext_csd.rst_n_function;
+ if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED)
+ return 0;
+ return 1;
+}
+EXPORT_SYMBOL(mmc_can_reset);
+
+static int mmc_do_hw_reset(struct mmc_host *host, int check)
+{
+ struct mmc_card *card = host->card;
+
+ if (!host->bus_ops->power_restore)
+ return -EOPNOTSUPP;
+
+ if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
+ return -EOPNOTSUPP;
+
+ if (!card)
+ return -EINVAL;
+
+ if (!mmc_can_reset(card))
+ return -EOPNOTSUPP;
+
+ mmc_host_clk_hold(host);
+ mmc_set_clock(host, host->f_init);
+
+ host->ops->hw_reset(host);
+
+ /* If the reset has happened, then a status command will fail */
+ if (check) {
+ struct mmc_command cmd = {0};
+ int err;
+
+ cmd.opcode = MMC_SEND_STATUS;
+ if (!mmc_host_is_spi(card->host))
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (!err) {
+ mmc_host_clk_release(host);
+ return -ENOSYS;
+ }
+ }
+
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR);
+ if (mmc_host_is_spi(host)) {
+ host->ios.chip_select = MMC_CS_HIGH;
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+ } else {
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+ }
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
+ mmc_set_ios(host);
+
+ mmc_host_clk_release(host);
+
+ return host->bus_ops->power_restore(host);
+}
+
+int mmc_hw_reset(struct mmc_host *host)
+{
+ return mmc_do_hw_reset(host, 0);
+}
+EXPORT_SYMBOL(mmc_hw_reset);
+
+int mmc_hw_reset_check(struct mmc_host *host)
+{
+ return mmc_do_hw_reset(host, 1);
+}
+EXPORT_SYMBOL(mmc_hw_reset_check);
+
static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
{
host->f_init = freq;
@@ -1738,6 +2000,12 @@
mmc_power_up(host);
/*
+ * Some eMMCs (with VCCQ always on) may not be reset after power up, so
+ * do a hardware reset if possible.
+ */
+ mmc_hw_reset_for_init(host);
+
+ /*
* sdio_reset sends CMD52 to reset card. Since we do not know
* if the card is being re-initialized, just send it. CMD52
* should be ignored by SD/eMMC cards.
@@ -1845,6 +2113,7 @@
mmc_claim_host(host);
mmc_detach_bus(host);
+ mmc_power_off(host);
mmc_release_host(host);
mmc_bus_put(host);
return;
@@ -1946,6 +2215,65 @@
}
EXPORT_SYMBOL(mmc_card_can_sleep);
+/*
+ * Flush the cache to the non-volatile storage.
+ */
+int mmc_flush_cache(struct mmc_card *card)
+{
+ struct mmc_host *host = card->host;
+ int err = 0;
+
+ if (!(host->caps2 & MMC_CAP2_CACHE_CTRL))
+ return err;
+
+ if (mmc_card_mmc(card) &&
+ (card->ext_csd.cache_size > 0) &&
+ (card->ext_csd.cache_ctrl & 1)) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_FLUSH_CACHE, 1, 0);
+ if (err)
+ pr_err("%s: cache flush error %d\n",
+ mmc_hostname(card->host), err);
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(mmc_flush_cache);
+
+/*
+ * Turn the cache ON/OFF.
+ * Turning the cache OFF shall trigger flushing of the data
+ * to the non-volatile storage.
+ */
+int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
+{
+ struct mmc_card *card = host->card;
+ int err = 0;
+
+ if (!(host->caps2 & MMC_CAP2_CACHE_CTRL) ||
+ mmc_card_is_removable(host))
+ return err;
+
+ if (card && mmc_card_mmc(card) &&
+ (card->ext_csd.cache_size > 0)) {
+ enable = !!enable;
+
+ if (card->ext_csd.cache_ctrl ^ enable)
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_CACHE_CTRL, enable, 0);
+ if (err)
+ pr_err("%s: cache %s error %d\n",
+ mmc_hostname(card->host),
+ enable ? "on" : "off",
+ err);
+ else
+ card->ext_csd.cache_ctrl = enable;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(mmc_cache_ctrl);
+
#ifdef CONFIG_PM
/**
@@ -1960,23 +2288,39 @@
cancel_delayed_work(&host->disable);
cancel_delayed_work(&host->detect);
mmc_flush_scheduled_work();
+ err = mmc_cache_ctrl(host, 0);
+ if (err)
+ goto out;
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
- if (host->bus_ops->suspend)
- err = host->bus_ops->suspend(host);
- if (err == -ENOSYS || !host->bus_ops->resume) {
- /*
- * We simply "remove" the card in this case.
- * It will be redetected on resume.
- */
- if (host->bus_ops->remove)
- host->bus_ops->remove(host);
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
- host->pm_flags = 0;
- err = 0;
+
+ /*
+ * A long response time is not acceptable for device drivers
+ * when doing suspend. Prevent mmc_claim_host in the suspend
+ * sequence, to potentially wait "forever" by trying to
+ * pre-claim the host.
+ */
+ if (mmc_try_claim_host(host)) {
+ if (host->bus_ops->suspend)
+ err = host->bus_ops->suspend(host);
+ if (err == -ENOSYS || !host->bus_ops->resume) {
+ /*
+ * We simply "remove" the card in this case.
+ * It will be redetected on resume.
+ */
+ if (host->bus_ops->remove)
+ host->bus_ops->remove(host);
+ mmc_claim_host(host);
+ mmc_detach_bus(host);
+ mmc_power_off(host);
+ mmc_release_host(host);
+ host->pm_flags = 0;
+ err = 0;
+ }
+ mmc_do_release_host(host);
+ } else {
+ err = -EBUSY;
}
}
mmc_bus_put(host);
@@ -1984,6 +2328,7 @@
if (!err && !mmc_card_keep_power(host))
mmc_power_off(host);
+out:
return err;
}
@@ -2018,7 +2363,7 @@
BUG_ON(!host->bus_ops->resume);
err = host->bus_ops->resume(host);
if (err) {
- printk(KERN_WARNING "%s: error %d during resume "
+ pr_warning("%s: error %d during resume "
"(card was removed?)\n",
mmc_hostname(host), err);
err = 0;
@@ -2049,6 +2394,7 @@
spin_lock_irqsave(&host->lock, flags);
host->rescan_disable = 1;
+ host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
spin_unlock_irqrestore(&host->lock, flags);
cancel_delayed_work_sync(&host->detect);
@@ -2061,6 +2407,7 @@
host->bus_ops->remove(host);
mmc_detach_bus(host);
+ mmc_power_off(host);
mmc_release_host(host);
host->pm_flags = 0;
break;
@@ -2071,6 +2418,7 @@
spin_lock_irqsave(&host->lock, flags);
host->rescan_disable = 0;
+ host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG;
spin_unlock_irqrestore(&host->lock, flags);
mmc_detect_change(host, 0);
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index d9411ed..14664f1 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -43,6 +43,7 @@
bool cmd11);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
+void mmc_power_off(struct mmc_host *host);
static inline void mmc_delay(unsigned int ms)
{
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 998797e..6045ea4 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -7,11 +7,13 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/moduleparam.h>
#include <linux/debugfs.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
+#include <linux/fault-inject.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
@@ -19,6 +21,14 @@
#include "core.h"
#include "mmc_ops.h"
+#ifdef CONFIG_FAIL_MMC_REQUEST
+
+static DECLARE_FAULT_ATTR(fail_default_attr);
+static char *fail_request;
+module_param(fail_request, charp, 0);
+
+#endif /* CONFIG_FAIL_MMC_REQUEST */
+
/* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */
static int mmc_ios_show(struct seq_file *s, void *data)
{
@@ -113,6 +123,15 @@
case MMC_TIMING_SD_HS:
str = "sd high-speed";
break;
+ case MMC_TIMING_UHS_SDR50:
+ str = "sd uhs SDR50";
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ str = "sd uhs SDR104";
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ str = "sd uhs DDR50";
+ break;
default:
str = "invalid";
break;
@@ -188,6 +207,15 @@
root, &host->clk_delay))
goto err_node;
#endif
+#ifdef CONFIG_FAIL_MMC_REQUEST
+ if (fail_request)
+ setup_fault_attr(&fail_default_attr, fail_request);
+ host->fail_mmc_request = fail_default_attr;
+ if (IS_ERR(fault_create_debugfs_attr("fail_mmc_request",
+ root,
+ &host->fail_mmc_request)))
+ goto err_node;
+#endif
return;
err_node:
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 793d0a0..ca2e4f5 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -301,6 +301,17 @@
host->max_blk_size = 512;
host->max_blk_count = PAGE_CACHE_SIZE / 512;
+ /*
+ * Enable runtime power management by default. This flag was added due
+ * to runtime power management causing disruption for some users, but
+ * the power on/off code has been improved since then.
+ *
+ * We'll enable this flag by default as an experiment, and if no
+ * problems are reported, we will follow up later and remove the flag
+ * altogether.
+ */
+ host->caps = MMC_CAP_POWER_OFF_CARD;
+
return host;
free:
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 5700b1c..3627044 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -101,7 +101,7 @@
break;
default:
- printk(KERN_ERR "%s: card has unknown MMCA version %d\n",
+ pr_err("%s: card has unknown MMCA version %d\n",
mmc_hostname(card->host), card->csd.mmca_vsn);
return -EINVAL;
}
@@ -135,7 +135,7 @@
*/
csd->structure = UNSTUFF_BITS(resp, 126, 2);
if (csd->structure == 0) {
- printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
+ pr_err("%s: unrecognised CSD structure version %d\n",
mmc_hostname(card->host), csd->structure);
return -EINVAL;
}
@@ -195,7 +195,7 @@
*/
ext_csd = kmalloc(512, GFP_KERNEL);
if (!ext_csd) {
- printk(KERN_ERR "%s: could not allocate a buffer to "
+ pr_err("%s: could not allocate a buffer to "
"receive the ext_csd.\n", mmc_hostname(card->host));
return -ENOMEM;
}
@@ -217,12 +217,12 @@
* stored in their CSD.
*/
if (card->csd.capacity == (4096 * 512)) {
- printk(KERN_ERR "%s: unable to read EXT_CSD "
+ pr_err("%s: unable to read EXT_CSD "
"on a possible high capacity card. "
"Card will be ignored.\n",
mmc_hostname(card->host));
} else {
- printk(KERN_WARNING "%s: unable to read "
+ pr_warning("%s: unable to read "
"EXT_CSD, performance might "
"suffer.\n",
mmc_hostname(card->host));
@@ -239,7 +239,9 @@
*/
static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
{
- int err = 0;
+ int err = 0, idx;
+ unsigned int part_size;
+ u8 hc_erase_grp_sz = 0, hc_wp_grp_sz = 0;
BUG_ON(!card);
@@ -250,7 +252,7 @@
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
if (card->ext_csd.raw_ext_csd_structure > 2) {
- printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
+ pr_err("%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
card->ext_csd.raw_ext_csd_structure);
err = -EINVAL;
@@ -260,7 +262,7 @@
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
if (card->ext_csd.rev > 6) {
- printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n",
+ pr_err("%s: unrecognised EXT_CSD revision %d\n",
mmc_hostname(card->host), card->ext_csd.rev);
err = -EINVAL;
goto out;
@@ -306,7 +308,7 @@
break;
default:
/* MMC v4 spec says this cannot happen */
- printk(KERN_WARNING "%s: card is mmc v4 but doesn't "
+ pr_warning("%s: card is mmc v4 but doesn't "
"support any high-speed modes.\n",
mmc_hostname(card->host));
}
@@ -340,7 +342,14 @@
* There are two boot regions of equal size, defined in
* multiples of 128K.
*/
- card->ext_csd.boot_size = ext_csd[EXT_CSD_BOOT_MULT] << 17;
+ if (ext_csd[EXT_CSD_BOOT_MULT] && mmc_boot_partition_access(card->host)) {
+ for (idx = 0; idx < MMC_NUM_BOOT_PARTITION; idx++) {
+ part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17;
+ mmc_part_add(card, part_size,
+ EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx,
+ "boot%d", idx, true);
+ }
+ }
}
card->ext_csd.raw_hc_erase_gap_size =
@@ -359,11 +368,12 @@
* card has the Enhanced area enabled. If so, export enhanced
* area offset and size to user by adding sysfs interface.
*/
+ card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
(ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
- u8 hc_erase_grp_sz =
+ hc_erase_grp_sz =
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
- u8 hc_wp_grp_sz =
+ hc_wp_grp_sz =
ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.enhanced_area_en = 1;
@@ -392,6 +402,41 @@
card->ext_csd.enhanced_area_offset = -EINVAL;
card->ext_csd.enhanced_area_size = -EINVAL;
}
+
+ /*
+ * General purpose partition feature support --
+ * If ext_csd has the size of general purpose partitions,
+ * set size, part_cfg, partition name in mmc_part.
+ */
+ if (ext_csd[EXT_CSD_PARTITION_SUPPORT] &
+ EXT_CSD_PART_SUPPORT_PART_EN) {
+ if (card->ext_csd.enhanced_area_en != 1) {
+ hc_erase_grp_sz =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+ hc_wp_grp_sz =
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+
+ card->ext_csd.enhanced_area_en = 1;
+ }
+
+ for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) {
+ if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] &&
+ !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] &&
+ !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2])
+ continue;
+ part_size =
+ (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]
+ << 16) +
+ (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1]
+ << 8) +
+ ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3];
+ part_size *= (size_t)(hc_erase_grp_sz *
+ hc_wp_grp_sz);
+ mmc_part_add(card, part_size << 19,
+ EXT_CSD_PART_CONFIG_ACC_GP0 + idx,
+ "gp%d", idx, false);
+ }
+ }
card->ext_csd.sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.sec_erase_mult =
@@ -402,14 +447,48 @@
ext_csd[EXT_CSD_TRIM_MULT];
}
- if (card->ext_csd.rev >= 5)
- card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
+ if (card->ext_csd.rev >= 5) {
+ /* check whether the eMMC card supports HPI */
+ if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) {
+ card->ext_csd.hpi = 1;
+ if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2)
+ card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION;
+ else
+ card->ext_csd.hpi_cmd = MMC_SEND_STATUS;
+ /*
+ * Indicate the maximum timeout to close
+ * a command interrupted by HPI
+ */
+ card->ext_csd.out_of_int_time =
+ ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10;
+ }
+ card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
+ card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION];
+ }
+
+ card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT];
if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
card->erased_byte = 0xFF;
else
card->erased_byte = 0x0;
+ /* eMMC v4.5 or later */
+ if (card->ext_csd.rev >= 6) {
+ card->ext_csd.feature_support |= MMC_DISCARD_FEATURE;
+
+ card->ext_csd.generic_cmd6_time = 10 *
+ ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
+ card->ext_csd.power_off_longtime = 10 *
+ ext_csd[EXT_CSD_POWER_OFF_LONG_TIME];
+
+ card->ext_csd.cache_size =
+ ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 |
+ ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 |
+ ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 |
+ ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24;
+ }
+
out:
return err;
}
@@ -530,6 +609,86 @@
};
/*
+ * Select the PowerClass for the current bus width
+ * If power class is defined for 4/8 bit bus in the
+ * extended CSD register, select it by executing the
+ * mmc_switch command.
+ */
+static int mmc_select_powerclass(struct mmc_card *card,
+ unsigned int bus_width, u8 *ext_csd)
+{
+ int err = 0;
+ unsigned int pwrclass_val;
+ unsigned int index = 0;
+ struct mmc_host *host;
+
+ BUG_ON(!card);
+
+ host = card->host;
+ BUG_ON(!host);
+
+ if (ext_csd == NULL)
+ return 0;
+
+ /* Power class selection is supported for versions >= 4.0 */
+ if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+ return 0;
+
+ /* Power class values are defined only for 4/8 bit bus */
+ if (bus_width == EXT_CSD_BUS_WIDTH_1)
+ return 0;
+
+ switch (1 << host->ios.vdd) {
+ case MMC_VDD_165_195:
+ if (host->ios.clock <= 26000000)
+ index = EXT_CSD_PWR_CL_26_195;
+ else if (host->ios.clock <= 52000000)
+ index = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
+ EXT_CSD_PWR_CL_52_195 :
+ EXT_CSD_PWR_CL_DDR_52_195;
+ else if (host->ios.clock <= 200000000)
+ index = EXT_CSD_PWR_CL_200_195;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ case MMC_VDD_34_35:
+ case MMC_VDD_35_36:
+ if (host->ios.clock <= 26000000)
+ index = EXT_CSD_PWR_CL_26_360;
+ else if (host->ios.clock <= 52000000)
+ index = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
+ EXT_CSD_PWR_CL_52_360 :
+ EXT_CSD_PWR_CL_DDR_52_360;
+ else if (host->ios.clock <= 200000000)
+ index = EXT_CSD_PWR_CL_200_360;
+ break;
+ default:
+ pr_warning("%s: Voltage range not supported "
+ "for power class.\n", mmc_hostname(host));
+ return -EINVAL;
+ }
+
+ pwrclass_val = ext_csd[index];
+
+ if (bus_width & (EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_BUS_WIDTH_8))
+ pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_8BIT_MASK) >>
+ EXT_CSD_PWR_CL_8BIT_SHIFT;
+ else
+ pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_4BIT_MASK) >>
+ EXT_CSD_PWR_CL_4BIT_SHIFT;
+
+ /* If the power class is different from the default value */
+ if (pwrclass_val > 0) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_POWER_CLASS,
+ pwrclass_val,
+ card->ext_csd.generic_cmd6_time);
+ }
+
+ return err;
+}
+
+/*
* Handle the detection and initialisation of a card.
*
* In the case of a resume, "oldcard" will contain the card
@@ -548,11 +707,16 @@
BUG_ON(!host);
WARN_ON(!host->claimed);
+ /* Set correct bus mode for MMC before attempting init */
+ if (!mmc_host_is_spi(host))
+ mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
+
/*
* Since we're changing the OCR value, we seem to
* need to tell some cards to go back to the idle
* state. We wait 1ms to give cards time to
* respond.
+ * mmc_go_idle is needed for eMMC that are asleep
*/
mmc_go_idle(host);
@@ -668,7 +832,8 @@
*/
if (card->ext_csd.enhanced_area_en) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_ERASE_GROUP_DEF, 1, 0);
+ EXT_CSD_ERASE_GROUP_DEF, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
@@ -706,17 +871,35 @@
}
/*
+ * If the host supports the power_off_notify capability then
+ * set the notification byte in the ext_csd register of device
+ */
+ if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) &&
+ (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_POWER_OFF_NOTIFICATION,
+ EXT_CSD_POWER_ON,
+ card->ext_csd.generic_cmd6_time);
+ if (err && err != -EBADMSG)
+ goto free_card;
+ }
+
+ if (!err)
+ card->poweroff_notify_state = MMC_POWERED_ON;
+
+ /*
* Activate high speed (if supported)
*/
if ((card->ext_csd.hs_max_dtr != 0) &&
(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1, 0);
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
if (err) {
- printk(KERN_WARNING "%s: switch to highspeed failed\n",
+ pr_warning("%s: switch to highspeed failed\n",
mmc_hostname(card->host));
err = 0;
} else {
@@ -726,6 +909,22 @@
}
/*
+ * Enable HPI feature (if supported)
+ */
+ if (card->ext_csd.hpi) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HPI_MGMT, 1, 0);
+ if (err && err != -EBADMSG)
+ goto free_card;
+ if (err) {
+ pr_warning("%s: Enabling HPI failed\n",
+ mmc_hostname(card->host));
+ err = 0;
+ } else
+ card->ext_csd.hpi_en = 1;
+ }
+
+ /*
* Compute bus speed.
*/
max_dtr = (unsigned int)-1;
@@ -780,10 +979,18 @@
bus_width = bus_widths[idx];
if (bus_width == MMC_BUS_WIDTH_1)
ddr = 0; /* no DDR for 1-bit width */
+ err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
+ ext_csd);
+ if (err)
+ pr_err("%s: power class selection to "
+ "bus width %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width);
+
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx][0],
- 0);
+ card->ext_csd.generic_cmd6_time);
if (!err) {
mmc_set_bus_width(card->host, bus_width);
@@ -803,13 +1010,21 @@
}
if (!err && ddr) {
+ err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
+ ext_csd);
+ if (err)
+ pr_err("%s: power class selection to "
+ "bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width, ddr);
+
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx][1],
- 0);
+ card->ext_csd.generic_cmd6_time);
}
if (err) {
- printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
+ pr_warning("%s: switch to bus width %d ddr %d "
"failed\n", mmc_hostname(card->host),
1 << bus_width, ddr);
goto free_card;
@@ -840,6 +1055,23 @@
}
}
+ /*
+ * If cache size is higher than 0, this indicates
+ * the existence of cache and it can be turned on.
+ */
+ if ((host->caps2 & MMC_CAP2_CACHE_CTRL) &&
+ card->ext_csd.cache_size > 0) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_CACHE_CTRL, 1, 0);
+ if (err && err != -EBADMSG)
+ goto free_card;
+
+ /*
+ * Only if no error, cache is turned on successfully.
+ */
+ card->ext_csd.cache_ctrl = err ? 0 : 1;
+ }
+
if (!oldcard)
host->card = card;
@@ -891,6 +1123,7 @@
mmc_claim_host(host);
mmc_detach_bus(host);
+ mmc_power_off(host);
mmc_release_host(host);
}
}
@@ -900,16 +1133,20 @@
*/
static int mmc_suspend(struct mmc_host *host)
{
+ int err = 0;
+
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
- if (!mmc_host_is_spi(host))
+ if (mmc_card_can_sleep(host))
+ err = mmc_card_sleep(host);
+ else if (!mmc_host_is_spi(host))
mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
- return 0;
+ return err;
}
/*
@@ -1016,6 +1253,10 @@
BUG_ON(!host);
WARN_ON(!host->claimed);
+ /* Set correct bus mode for MMC before attempting attach */
+ if (!mmc_host_is_spi(host))
+ mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
+
err = mmc_send_op_cond(host, 0, &ocr);
if (err)
return err;
@@ -1038,7 +1279,7 @@
* support.
*/
if (ocr & 0x7F) {
- printk(KERN_WARNING "%s: card claims to support voltages "
+ pr_warning("%s: card claims to support voltages "
"below the defined range. These will be ignored.\n",
mmc_hostname(host));
ocr &= ~0x7F;
@@ -1077,7 +1318,7 @@
err:
mmc_detach_bus(host);
- printk(KERN_ERR "%s: error %d whilst initialising MMC card\n",
+ pr_err("%s: error %d whilst initialising MMC card\n",
mmc_hostname(host), err);
return err;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 770c3d0..007863e 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -233,7 +233,7 @@
mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
u32 opcode, void *buf, unsigned len)
{
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
@@ -414,7 +414,7 @@
return -EBADMSG;
} else {
if (status & 0xFDFFA000)
- printk(KERN_WARNING "%s: unexpected status %#x after "
+ pr_warning("%s: unexpected status %#x after "
"switch", mmc_hostname(card->host), status);
if (status & R1_SWITCH_ERROR)
return -EBADMSG;
@@ -454,7 +454,7 @@
mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
u8 len)
{
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
@@ -476,7 +476,7 @@
else if (len == 4)
test_buf = testdata_4bit;
else {
- printk(KERN_ERR "%s: Invalid bus_width %d\n",
+ pr_err("%s: Invalid bus_width %d\n",
mmc_hostname(host), len);
kfree(data_buf);
return -EINVAL;
@@ -547,3 +547,34 @@
err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
return err;
}
+
+int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
+{
+ struct mmc_command cmd = {0};
+ unsigned int opcode;
+ unsigned int flags;
+ int err;
+
+ opcode = card->ext_csd.hpi_cmd;
+ if (opcode == MMC_STOP_TRANSMISSION)
+ flags = MMC_RSP_R1 | MMC_CMD_AC;
+ else if (opcode == MMC_SEND_STATUS)
+ flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ cmd.opcode = opcode;
+ cmd.arg = card->rca << 16 | 1;
+ cmd.flags = flags;
+ cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ pr_warn("%s: error %d interrupting operation. "
+ "HPI command response %#x\n", mmc_hostname(card->host),
+ err, cmd.resp[0]);
+ return err;
+ }
+ if (status)
+ *status = cmd.resp[0];
+
+ return 0;
+}
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 9276946..3dd8941 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -26,6 +26,7 @@
int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
int mmc_card_sleepawake(struct mmc_host *host, int sleep);
int mmc_bus_test(struct mmc_card *card, u8 bus_width);
+int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status);
#endif
diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c
index 3a59621..6c3cf98 100644
--- a/drivers/mmc/core/quirks.c
+++ b/drivers/mmc/core/quirks.c
@@ -21,6 +21,14 @@
#define SDIO_DEVICE_ID_TI_WL1271 0x4076
#endif
+#ifndef SDIO_VENDOR_ID_STE
+#define SDIO_VENDOR_ID_STE 0x0020
+#endif
+
+#ifndef SDIO_DEVICE_ID_STE_CW1200
+#define SDIO_DEVICE_ID_STE_CW1200 0x2280
+#endif
+
/*
* This hook just adds a quirk for all sdio devices
*/
@@ -46,6 +54,9 @@
SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271,
add_quirk, MMC_QUIRK_DISABLE_CD),
+ SDIO_FIXUP(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200,
+ add_quirk, MMC_QUIRK_BROKEN_BYTE_MODE_512),
+
END_FIXUP
};
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 0370e03..a230e7f 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -163,7 +163,7 @@
csd->erase_size = 1;
break;
default:
- printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
+ pr_err("%s: unrecognised CSD structure version %d\n",
mmc_hostname(card->host), csd_struct);
return -EINVAL;
}
@@ -187,7 +187,7 @@
scr_struct = UNSTUFF_BITS(resp, 60, 4);
if (scr_struct != 0) {
- printk(KERN_ERR "%s: unrecognised SCR structure version %d\n",
+ pr_err("%s: unrecognised SCR structure version %d\n",
mmc_hostname(card->host), scr_struct);
return -EINVAL;
}
@@ -218,7 +218,7 @@
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
- printk(KERN_WARNING "%s: card lacks mandatory SD Status "
+ pr_warning("%s: card lacks mandatory SD Status "
"function.\n", mmc_hostname(card->host));
return 0;
}
@@ -229,7 +229,7 @@
err = mmc_app_sd_status(card, ssr);
if (err) {
- printk(KERN_WARNING "%s: problem reading SD Status "
+ pr_warning("%s: problem reading SD Status "
"register.\n", mmc_hostname(card->host));
err = 0;
goto out;
@@ -253,7 +253,7 @@
card->ssr.erase_offset = eo * 1000;
}
} else {
- printk(KERN_WARNING "%s: SD Status: Invalid Allocation Unit "
+ pr_warning("%s: SD Status: Invalid Allocation Unit "
"size.\n", mmc_hostname(card->host));
}
out:
@@ -273,7 +273,7 @@
return 0;
if (!(card->csd.cmdclass & CCC_SWITCH)) {
- printk(KERN_WARNING "%s: card lacks mandatory switch "
+ pr_warning("%s: card lacks mandatory switch "
"function, performance might suffer.\n",
mmc_hostname(card->host));
return 0;
@@ -283,7 +283,7 @@
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- printk(KERN_ERR "%s: could not allocate a buffer for "
+ pr_err("%s: could not allocate a buffer for "
"switch capabilities.\n",
mmc_hostname(card->host));
return -ENOMEM;
@@ -299,13 +299,16 @@
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- printk(KERN_WARNING "%s: problem reading Bus Speed modes.\n",
+ pr_warning("%s: problem reading Bus Speed modes.\n",
mmc_hostname(card->host));
err = 0;
goto out;
}
+ if (status[13] & UHS_SDR50_BUS_SPEED)
+ card->sw_caps.hs_max_dtr = 50000000;
+
if (card->scr.sda_spec3) {
card->sw_caps.sd3_bus_mode = status[13];
@@ -319,7 +322,7 @@
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- printk(KERN_WARNING "%s: problem reading "
+ pr_warning("%s: problem reading "
"Driver Strength.\n",
mmc_hostname(card->host));
err = 0;
@@ -339,7 +342,7 @@
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- printk(KERN_WARNING "%s: problem reading "
+ pr_warning("%s: problem reading "
"Current Limit.\n",
mmc_hostname(card->host));
err = 0;
@@ -348,9 +351,6 @@
}
card->sw_caps.sd3_curr_limit = status[7];
- } else {
- if (status[13] & 0x02)
- card->sw_caps.hs_max_dtr = 50000000;
}
out:
@@ -383,7 +383,7 @@
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- printk(KERN_ERR "%s: could not allocate a buffer for "
+ pr_err("%s: could not allocate a buffer for "
"switch capabilities.\n", mmc_hostname(card->host));
return -ENOMEM;
}
@@ -393,7 +393,7 @@
goto out;
if ((status[16] & 0xF) != 1) {
- printk(KERN_WARNING "%s: Problem switching card "
+ pr_warning("%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(card->host));
err = 0;
@@ -459,7 +459,7 @@
return err;
if ((status[15] & 0xF) != drive_strength) {
- printk(KERN_WARNING "%s: Problem setting drive strength!\n",
+ pr_warning("%s: Problem setting drive strength!\n",
mmc_hostname(card->host));
return 0;
}
@@ -538,7 +538,7 @@
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
- printk(KERN_WARNING "%s: Problem setting bus speed mode!\n",
+ pr_warning("%s: Problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
@@ -600,7 +600,7 @@
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
- printk(KERN_WARNING "%s: Problem setting current limit!\n",
+ pr_warning("%s: Problem setting current limit!\n",
mmc_hostname(card->host));
return 0;
@@ -622,7 +622,7 @@
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- printk(KERN_ERR "%s: could not allocate a buffer for "
+ pr_err("%s: could not allocate a buffer for "
"switch capabilities.\n", mmc_hostname(card->host));
return -ENOMEM;
}
@@ -852,7 +852,7 @@
ro = host->ops->get_ro(host);
if (ro < 0) {
- printk(KERN_WARNING "%s: host does not "
+ pr_warning("%s: host does not "
"support reading read-only "
"switch. assuming write-enable.\n",
mmc_hostname(host));
@@ -929,8 +929,6 @@
err = mmc_send_relative_addr(host, &card->rca);
if (err)
return err;
-
- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
}
if (!oldcard) {
@@ -1043,6 +1041,7 @@
mmc_claim_host(host);
mmc_detach_bus(host);
+ mmc_power_off(host);
mmc_release_host(host);
}
}
@@ -1167,7 +1166,7 @@
* support.
*/
if (ocr & 0x7F) {
- printk(KERN_WARNING "%s: card claims to support voltages "
+ pr_warning("%s: card claims to support voltages "
"below the defined range. These will be ignored.\n",
mmc_hostname(host));
ocr &= ~0x7F;
@@ -1175,7 +1174,7 @@
if ((ocr & MMC_VDD_165_195) &&
!(host->ocr_avail_sd & MMC_VDD_165_195)) {
- printk(KERN_WARNING "%s: SD card claims to support the "
+ pr_warning("%s: SD card claims to support the "
"incompletely defined 'low voltage range'. This "
"will be ignored.\n", mmc_hostname(host));
ocr &= ~MMC_VDD_165_195;
@@ -1214,7 +1213,7 @@
err:
mmc_detach_bus(host);
- printk(KERN_ERR "%s: error %d whilst initialising SD card\n",
+ pr_err("%s: error %d whilst initialising SD card\n",
mmc_hostname(host), err);
return err;
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 021fed1..46a7854 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -67,7 +67,7 @@
int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
struct mmc_command *cmd, int retries)
{
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
int i, err;
@@ -244,7 +244,7 @@
int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
{
int err;
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
@@ -303,7 +303,7 @@
int mmc_sd_switch(struct mmc_card *card, int mode, int group,
u8 value, u8 *resp)
{
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
@@ -348,7 +348,7 @@
int mmc_app_sd_status(struct mmc_card *card, void *ssr)
{
int err;
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 262fff0..3ab565e 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -111,8 +111,8 @@
cccr_vsn = data & 0x0f;
- if (cccr_vsn > SDIO_CCCR_REV_1_20) {
- printk(KERN_ERR "%s: unrecognised CCCR structure version %d\n",
+ if (cccr_vsn > SDIO_CCCR_REV_3_00) {
+ pr_err("%s: unrecognised CCCR structure version %d\n",
mmc_hostname(card->host), cccr_vsn);
return -EINVAL;
}
@@ -408,8 +408,6 @@
*/
if (oldcard)
oldcard->rca = card->rca;
-
- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
}
/*
@@ -597,6 +595,7 @@
mmc_claim_host(host);
mmc_detach_bus(host);
+ mmc_power_off(host);
mmc_release_host(host);
}
}
@@ -778,7 +777,7 @@
* support.
*/
if (ocr & 0x7F) {
- printk(KERN_WARNING "%s: card claims to support voltages "
+ pr_warning("%s: card claims to support voltages "
"below the defined range. These will be ignored.\n",
mmc_hostname(host));
ocr &= ~0x7F;
@@ -875,7 +874,7 @@
err:
mmc_detach_bus(host);
- printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n",
+ pr_err("%s: error %d whilst initialising SDIO card\n",
mmc_hostname(host), err);
return err;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index e4e6822..c643b2f 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -173,7 +173,7 @@
drv->remove(func);
if (func->irq_handler) {
- printk(KERN_WARNING "WARNING: driver %s did not remove "
+ pr_warning("WARNING: driver %s did not remove "
"its interrupt handler!\n", drv->name);
sdio_claim_host(func);
sdio_release_irq(func);
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index 541bdb8..f1c7ed8 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -132,7 +132,7 @@
ret = -EINVAL;
}
if (ret && ret != -EILSEQ && ret != -ENOENT) {
- printk(KERN_ERR "%s: bad %s tuple 0x%02x (%u bytes)\n",
+ pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n",
mmc_hostname(card->host), tpl_descr, code, size);
}
} else {
@@ -313,7 +313,7 @@
if (ret == -ENOENT) {
/* warn about unknown tuples */
- printk(KERN_WARNING "%s: queuing unknown"
+ pr_warning("%s: queuing unknown"
" CIS tuple 0x%02x (%u bytes)\n",
mmc_hostname(card->host),
tpl_code, tpl_link);
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 03ead02..b644dd5 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -45,7 +45,7 @@
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
if (ret) {
- printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n",
+ pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
mmc_card_id(card), ret);
return ret;
}
@@ -55,7 +55,7 @@
if (pending & (1 << i)) {
func = card->sdio_func[i - 1];
if (!func) {
- printk(KERN_WARNING "%s: pending IRQ for "
+ pr_warning("%s: pending IRQ for "
"non-existent function\n",
mmc_card_id(card));
ret = -EINVAL;
@@ -63,7 +63,7 @@
func->irq_handler(func);
count++;
} else {
- printk(KERN_WARNING "%s: pending IRQ with no handler\n",
+ pr_warning("%s: pending IRQ with no handler\n",
sdio_func_id(func));
ret = -EINVAL;
}
diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
index f087d87..b0517cc 100644
--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -121,7 +121,7 @@
int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
{
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
@@ -144,8 +144,11 @@
cmd.arg |= fn << 28;
cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
cmd.arg |= addr << 9;
- if (blocks == 1 && blksz <= 512)
- cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
+ if (blocks == 1 && blksz < 512)
+ cmd.arg |= blksz; /* byte mode */
+ else if (blocks == 1 && blksz == 512 &&
+ !(mmc_card_broken_byte_mode_512(card)))
+ cmd.arg |= 0; /* byte mode, 0==512 */
else
cmd.arg |= 0x08000000 | blocks; /* block mode */
cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8c87096..87d5067 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -130,13 +130,13 @@
If unsure, say N.
config MMC_SDHCI_ESDHC_IMX
- tristate "SDHCI platform support for the Freescale eSDHC i.MX controller"
- depends on ARCH_MX25 || ARCH_MX35 || ARCH_MX5
+ tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
+ depends on ARCH_MXC
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
- This selects the Freescale eSDHC controller support on the platform
- bus, found on platforms like mx35/51.
+ This selects the Freescale eSDHC/uSDHC controller support
+ found on i.MX25, i.MX35 i.MX5x and i.MX6x.
If you have a controller with this interface, say Y or M here.
@@ -326,11 +326,11 @@
support for SDIO devices.
config MMC_MXC
- tristate "Freescale i.MX2/3 Multimedia Card Interface support"
- depends on MACH_MX21 || MACH_MX27 || ARCH_MX31
+ tristate "Freescale i.MX21/27/31 Multimedia Card Interface support"
+ depends on ARCH_MXC
help
- This selects the Freescale i.MX2/3 Multimedia card Interface.
- If you have a i.MX platform with a Multimedia Card slot,
+ This selects the Freescale i.MX21, i.MX27 and i.MX31 Multimedia card
+ Interface. If you have a i.MX platform with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index a4aa3af..a8b4d2a 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -869,7 +869,11 @@
static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
{
struct at91mci_host *host = _host;
- int present = !gpio_get_value(irq_to_gpio(irq));
+ int present;
+
+ /* entering this ISR means that we have configured det_pin:
+ * we can use its value in board structure */
+ present = !gpio_get_value(host->board->det_pin);
/*
* we expect this irq on both insert and remove,
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index fc8a0fe..000b3ad 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -17,112 +17,126 @@
#define __DRIVERS_MMC_ATMEL_MCI_H__
/* MCI Register Definitions */
-#define MCI_CR 0x0000 /* Control */
-# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
-# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
-# define MCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */
-# define MCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */
-# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */
-#define MCI_MR 0x0004 /* Mode */
-# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
-# define MCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
-# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
-# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
-# define MCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */
-# define MCI_MR_PDCPADV ( 1 << 14) /* Padding Value */
-# define MCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */
-#define MCI_DTOR 0x0008 /* Data Timeout */
-# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
-# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
-#define MCI_SDCR 0x000c /* SD Card / SDIO */
-# define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
-# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
-# define MCI_SDCSEL_MASK ( 3 << 0)
-# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
-# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
-# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */
-# define MCI_SDCBUS_MASK ( 3 << 6)
-#define MCI_ARGR 0x0010 /* Command Argument */
-#define MCI_CMDR 0x0014 /* Command */
-# define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
-# define MCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */
-# define MCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */
-# define MCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */
-# define MCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */
-# define MCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */
-# define MCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */
-# define MCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */
-# define MCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */
-# define MCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */
-# define MCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */
-# define MCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */
-# define MCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */
-# define MCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */
-# define MCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */
-# define MCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */
-# define MCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */
-# define MCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */
-# define MCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */
-# define MCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */
-# define MCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */
-# define MCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */
-#define MCI_BLKR 0x0018 /* Block */
-# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */
-# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
-#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
-# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
-# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
-#define MCI_RSPR 0x0020 /* Response 0 */
-#define MCI_RSPR1 0x0024 /* Response 1 */
-#define MCI_RSPR2 0x0028 /* Response 2 */
-#define MCI_RSPR3 0x002c /* Response 3 */
-#define MCI_RDR 0x0030 /* Receive Data */
-#define MCI_TDR 0x0034 /* Transmit Data */
-#define MCI_SR 0x0040 /* Status */
-#define MCI_IER 0x0044 /* Interrupt Enable */
-#define MCI_IDR 0x0048 /* Interrupt Disable */
-#define MCI_IMR 0x004c /* Interrupt Mask */
-# define MCI_CMDRDY ( 1 << 0) /* Command Ready */
-# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */
-# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */
-# define MCI_BLKE ( 1 << 3) /* Data Block Ended */
-# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
-# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
-# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
-# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
-# define MCI_RINDE ( 1 << 16) /* Response Index Error */
-# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */
-# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */
-# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */
-# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */
-# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */
-# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */
-# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
-# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
-#define MCI_DMA 0x0050 /* DMA Configuration[2] */
-# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
-# define MCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
-# define MCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */
-#define MCI_CFG 0x0054 /* Configuration[2] */
-# define MCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */
-# define MCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */
-# define MCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */
-# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */
-#define MCI_WPMR 0x00e4 /* Write Protection Mode[2] */
-# define MCI_WP_EN ( 1 << 0) /* WP Enable */
-# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */
-#define MCI_WPSR 0x00e8 /* Write Protection Status[2] */
-# define MCI_GET_WP_VS(x) ((x) & 0x0f)
-# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
-#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
+#define ATMCI_CR 0x0000 /* Control */
+# define ATMCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
+# define ATMCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
+# define ATMCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */
+# define ATMCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */
+# define ATMCI_CR_SWRST ( 1 << 7) /* Software Reset */
+#define ATMCI_MR 0x0004 /* Mode */
+# define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
+# define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
+# define ATMCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
+# define ATMCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
+# define ATMCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */
+# define ATMCI_MR_PDCPADV ( 1 << 14) /* Padding Value */
+# define ATMCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */
+#define ATMCI_DTOR 0x0008 /* Data Timeout */
+# define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
+# define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
+#define ATMCI_SDCR 0x000c /* SD Card / SDIO */
+# define ATMCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
+# define ATMCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
+# define ATMCI_SDCSEL_MASK ( 3 << 0)
+# define ATMCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
+# define ATMCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
+# define ATMCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */
+# define ATMCI_SDCBUS_MASK ( 3 << 6)
+#define ATMCI_ARGR 0x0010 /* Command Argument */
+#define ATMCI_CMDR 0x0014 /* Command */
+# define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
+# define ATMCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */
+# define ATMCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */
+# define ATMCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */
+# define ATMCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */
+# define ATMCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */
+# define ATMCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */
+# define ATMCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */
+# define ATMCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */
+# define ATMCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */
+# define ATMCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */
+# define ATMCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */
+# define ATMCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */
+# define ATMCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */
+# define ATMCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */
+# define ATMCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */
+# define ATMCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */
+# define ATMCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */
+# define ATMCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */
+# define ATMCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */
+# define ATMCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */
+# define ATMCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */
+#define ATMCI_BLKR 0x0018 /* Block */
+# define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */
+# define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
+#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
+# define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
+# define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
+#define ATMCI_RSPR 0x0020 /* Response 0 */
+#define ATMCI_RSPR1 0x0024 /* Response 1 */
+#define ATMCI_RSPR2 0x0028 /* Response 2 */
+#define ATMCI_RSPR3 0x002c /* Response 3 */
+#define ATMCI_RDR 0x0030 /* Receive Data */
+#define ATMCI_TDR 0x0034 /* Transmit Data */
+#define ATMCI_SR 0x0040 /* Status */
+#define ATMCI_IER 0x0044 /* Interrupt Enable */
+#define ATMCI_IDR 0x0048 /* Interrupt Disable */
+#define ATMCI_IMR 0x004c /* Interrupt Mask */
+# define ATMCI_CMDRDY ( 1 << 0) /* Command Ready */
+# define ATMCI_RXRDY ( 1 << 1) /* Receiver Ready */
+# define ATMCI_TXRDY ( 1 << 2) /* Transmitter Ready */
+# define ATMCI_BLKE ( 1 << 3) /* Data Block Ended */
+# define ATMCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
+# define ATMCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
+# define ATMCI_ENDRX ( 1 << 6) /* End of RX Buffer */
+# define ATMCI_ENDTX ( 1 << 7) /* End of TX Buffer */
+# define ATMCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
+# define ATMCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
+# define ATMCI_SDIOWAIT ( 1 << 12) /* SDIO Read Wait Operation Status */
+# define ATMCI_CSRCV ( 1 << 13) /* CE-ATA Completion Signal Received */
+# define ATMCI_RXBUFF ( 1 << 14) /* RX Buffer Full */
+# define ATMCI_TXBUFE ( 1 << 15) /* TX Buffer Empty */
+# define ATMCI_RINDE ( 1 << 16) /* Response Index Error */
+# define ATMCI_RDIRE ( 1 << 17) /* Response Direction Error */
+# define ATMCI_RCRCE ( 1 << 18) /* Response CRC Error */
+# define ATMCI_RENDE ( 1 << 19) /* Response End Bit Error */
+# define ATMCI_RTOE ( 1 << 20) /* Response Time-Out Error */
+# define ATMCI_DCRCE ( 1 << 21) /* Data CRC Error */
+# define ATMCI_DTOE ( 1 << 22) /* Data Time-Out Error */
+# define ATMCI_CSTOE ( 1 << 23) /* Completion Signal Time-out Error */
+# define ATMCI_BLKOVRE ( 1 << 24) /* DMA Block Overrun Error */
+# define ATMCI_DMADONE ( 1 << 25) /* DMA Transfer Done */
+# define ATMCI_FIFOEMPTY ( 1 << 26) /* FIFO Empty Flag */
+# define ATMCI_XFRDONE ( 1 << 27) /* Transfer Done Flag */
+# define ATMCI_ACKRCV ( 1 << 28) /* Boot Operation Acknowledge Received */
+# define ATMCI_ACKRCVE ( 1 << 29) /* Boot Operation Acknowledge Error */
+# define ATMCI_OVRE ( 1 << 30) /* RX Overrun Error */
+# define ATMCI_UNRE ( 1 << 31) /* TX Underrun Error */
+#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */
+# define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
+# define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
+# define ATMCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */
+#define ATMCI_CFG 0x0054 /* Configuration[2] */
+# define ATMCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */
+# define ATMCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */
+# define ATMCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */
+# define ATMCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */
+#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */
+# define ATMCI_WP_EN ( 1 << 0) /* WP Enable */
+# define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */
+#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */
+# define ATMCI_GET_WP_VS(x) ((x) & 0x0f)
+# define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
+#define ATMCI_VERSION 0x00FC /* Version */
+#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
/* This is not including the FIFO Aperture on MCI2 */
-#define MCI_REGS_SIZE 0x100
+#define ATMCI_REGS_SIZE 0x100
/* Register access macros */
-#define mci_readl(port,reg) \
- __raw_readl((port)->regs + MCI_##reg)
-#define mci_writel(port,reg,value) \
- __raw_writel((value), (port)->regs + MCI_##reg)
+#define atmci_readl(port,reg) \
+ __raw_readl((port)->regs + reg)
+#define atmci_writel(port,reg,value) \
+ __raw_writel((value), (port)->regs + reg)
#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index fa8cae1..a7ee502 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,6 +30,7 @@
#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
+#include <linux/atmel_pdc.h>
#include <asm/io.h>
#include <asm/unaligned.h>
@@ -39,7 +40,7 @@
#include "atmel-mci-regs.h"
-#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
+#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
#define ATMCI_DMA_THRESHOLD 16
enum {
@@ -58,18 +59,35 @@
STATE_DATA_ERROR,
};
+enum atmci_xfer_dir {
+ XFER_RECEIVE = 0,
+ XFER_TRANSMIT,
+};
+
+enum atmci_pdc_buf {
+ PDC_FIRST_BUF = 0,
+ PDC_SECOND_BUF,
+};
+
+struct atmel_mci_caps {
+ bool has_dma;
+ bool has_pdc;
+ bool has_cfg_reg;
+ bool has_cstor_reg;
+ bool has_highspeed;
+ bool has_rwproof;
+};
+
struct atmel_mci_dma {
-#ifdef CONFIG_MMC_ATMELMCI_DMA
struct dma_chan *chan;
struct dma_async_tx_descriptor *data_desc;
-#endif
};
/**
* struct atmel_mci - MMC controller state shared between all slots
* @lock: Spinlock protecting the queue and associated data.
* @regs: Pointer to MMIO registers.
- * @sg: Scatterlist entry currently being processed by PIO code, if any.
+ * @sg: Scatterlist entry currently being processed by PIO or PDC code.
* @pio_offset: Offset into the current scatterlist entry.
* @cur_slot: The slot which is currently using the controller.
* @mrq: The request currently being processed on @cur_slot,
@@ -77,6 +95,7 @@
* @cmd: The command currently being sent to the card, or NULL.
* @data: The data currently being transferred, or NULL if no data
* transfer is in progress.
+ * @data_size: just data->blocks * data->blksz.
* @dma: DMA client state.
* @data_chan: DMA channel being used for the current data transfer.
* @cmd_status: Snapshot of SR taken upon completion of the current
@@ -103,6 +122,13 @@
* @mck: The peripheral bus clock hooked up to the MMC controller.
* @pdev: Platform device associated with the MMC controller.
* @slot: Slots sharing this MMC controller.
+ * @caps: MCI capabilities depending on MCI version.
+ * @prepare_data: function to setup MCI before data transfer which
+ * depends on MCI capabilities.
+ * @submit_data: function to start data transfer which depends on MCI
+ * capabilities.
+ * @stop_transfer: function to stop data transfer which depends on MCI
+ * capabilities.
*
* Locking
* =======
@@ -143,6 +169,7 @@
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_data *data;
+ unsigned int data_size;
struct atmel_mci_dma dma;
struct dma_chan *data_chan;
@@ -166,7 +193,13 @@
struct clk *mck;
struct platform_device *pdev;
- struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS];
+ struct atmel_mci_slot *slot[ATMCI_MAX_NR_SLOTS];
+
+ struct atmel_mci_caps caps;
+
+ u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data);
+ void (*submit_data)(struct atmel_mci *host, struct mmc_data *data);
+ void (*stop_transfer)(struct atmel_mci *host);
};
/**
@@ -220,31 +253,6 @@
set_bit(event, &host->pending_events)
/*
- * Enable or disable features/registers based on
- * whether the processor supports them
- */
-static bool mci_has_rwproof(void)
-{
- if (cpu_is_at91sam9261() || cpu_is_at91rm9200())
- return false;
- else
- return true;
-}
-
-/*
- * The new MCI2 module isn't 100% compatible with the old MCI module,
- * and it has a few nice features which we want to use...
- */
-static inline bool atmci_is_mci2(void)
-{
- if (cpu_is_at91sam9g45())
- return true;
-
- return false;
-}
-
-
-/*
* The debugfs stuff below is mostly optimized away when
* CONFIG_DEBUG_FS is not set.
*/
@@ -352,7 +360,7 @@
struct atmel_mci *host = s->private;
u32 *buf;
- buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
+ buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -363,47 +371,50 @@
*/
spin_lock_bh(&host->lock);
clk_enable(host->mck);
- memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+ memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
clk_disable(host->mck);
spin_unlock_bh(&host->lock);
seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
- buf[MCI_MR / 4],
- buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
- buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
- buf[MCI_MR / 4] & 0xff);
- seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
- seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
- seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
+ buf[ATMCI_MR / 4],
+ buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
+ buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "",
+ buf[ATMCI_MR / 4] & 0xff);
+ seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
+ seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
+ seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
- buf[MCI_BLKR / 4],
- buf[MCI_BLKR / 4] & 0xffff,
- (buf[MCI_BLKR / 4] >> 16) & 0xffff);
- if (atmci_is_mci2())
- seq_printf(s, "CSTOR:\t0x%08x\n", buf[MCI_CSTOR / 4]);
+ buf[ATMCI_BLKR / 4],
+ buf[ATMCI_BLKR / 4] & 0xffff,
+ (buf[ATMCI_BLKR / 4] >> 16) & 0xffff);
+ if (host->caps.has_cstor_reg)
+ seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]);
/* Don't read RSPR and RDR; it will consume the data there */
- atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
- atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+ atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]);
+ atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]);
- if (atmci_is_mci2()) {
+ if (host->caps.has_dma) {
u32 val;
- val = buf[MCI_DMA / 4];
+ val = buf[ATMCI_DMA / 4];
seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n",
val, val & 3,
((val >> 4) & 3) ?
1 << (((val >> 4) & 3) + 1) : 1,
- val & MCI_DMAEN ? " DMAEN" : "");
+ val & ATMCI_DMAEN ? " DMAEN" : "");
+ }
+ if (host->caps.has_cfg_reg) {
+ u32 val;
- val = buf[MCI_CFG / 4];
+ val = buf[ATMCI_CFG / 4];
seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n",
val,
- val & MCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
- val & MCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
- val & MCI_CFG_HSMODE ? " HSMODE" : "",
- val & MCI_CFG_LSYNC ? " LSYNC" : "");
+ val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
+ val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
+ val & ATMCI_CFG_HSMODE ? " HSMODE" : "",
+ val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
}
kfree(buf);
@@ -466,7 +477,7 @@
dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
}
-static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host,
unsigned int ns)
{
return (ns * (host->bus_hz / 1000000) + 999) / 1000;
@@ -482,7 +493,8 @@
unsigned dtocyc;
unsigned dtomul;
- timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+ timeout = atmci_ns_to_clocks(host, data->timeout_ns)
+ + data->timeout_clks;
for (dtomul = 0; dtomul < 8; dtomul++) {
unsigned shift = dtomul_to_shift[dtomul];
@@ -498,7 +510,7 @@
dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
dtocyc << dtomul_to_shift[dtomul]);
- mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
+ atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
}
/*
@@ -512,13 +524,13 @@
cmd->error = -EINPROGRESS;
- cmdr = MCI_CMDR_CMDNB(cmd->opcode);
+ cmdr = ATMCI_CMDR_CMDNB(cmd->opcode);
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136)
- cmdr |= MCI_CMDR_RSPTYP_136BIT;
+ cmdr |= ATMCI_CMDR_RSPTYP_136BIT;
else
- cmdr |= MCI_CMDR_RSPTYP_48BIT;
+ cmdr |= ATMCI_CMDR_RSPTYP_48BIT;
}
/*
@@ -526,34 +538,34 @@
* it's too difficult to determine whether this is an ACMD or
* not. Better make it 64.
*/
- cmdr |= MCI_CMDR_MAXLAT_64CYC;
+ cmdr |= ATMCI_CMDR_MAXLAT_64CYC;
if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
- cmdr |= MCI_CMDR_OPDCMD;
+ cmdr |= ATMCI_CMDR_OPDCMD;
data = cmd->data;
if (data) {
- cmdr |= MCI_CMDR_START_XFER;
+ cmdr |= ATMCI_CMDR_START_XFER;
if (cmd->opcode == SD_IO_RW_EXTENDED) {
- cmdr |= MCI_CMDR_SDIO_BLOCK;
+ cmdr |= ATMCI_CMDR_SDIO_BLOCK;
} else {
if (data->flags & MMC_DATA_STREAM)
- cmdr |= MCI_CMDR_STREAM;
+ cmdr |= ATMCI_CMDR_STREAM;
else if (data->blocks > 1)
- cmdr |= MCI_CMDR_MULTI_BLOCK;
+ cmdr |= ATMCI_CMDR_MULTI_BLOCK;
else
- cmdr |= MCI_CMDR_BLOCK;
+ cmdr |= ATMCI_CMDR_BLOCK;
}
if (data->flags & MMC_DATA_READ)
- cmdr |= MCI_CMDR_TRDIR_READ;
+ cmdr |= ATMCI_CMDR_TRDIR_READ;
}
return cmdr;
}
-static void atmci_start_command(struct atmel_mci *host,
+static void atmci_send_command(struct atmel_mci *host,
struct mmc_command *cmd, u32 cmd_flags)
{
WARN_ON(host->cmd);
@@ -563,43 +575,119 @@
"start command: ARGR=0x%08x CMDR=0x%08x\n",
cmd->arg, cmd_flags);
- mci_writel(host, ARGR, cmd->arg);
- mci_writel(host, CMDR, cmd_flags);
+ atmci_writel(host, ATMCI_ARGR, cmd->arg);
+ atmci_writel(host, ATMCI_CMDR, cmd_flags);
}
-static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
+static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
{
- atmci_start_command(host, data->stop, host->stop_cmdr);
- mci_writel(host, IER, MCI_CMDRDY);
+ atmci_send_command(host, data->stop, host->stop_cmdr);
+ atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
}
-#ifdef CONFIG_MMC_ATMELMCI_DMA
-static void atmci_dma_cleanup(struct atmel_mci *host)
+/*
+ * Configure given PDC buffer taking care of alignement issues.
+ * Update host->data_size and host->sg.
+ */
+static void atmci_pdc_set_single_buf(struct atmel_mci *host,
+ enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb)
{
- struct mmc_data *data = host->data;
+ u32 pointer_reg, counter_reg;
- if (data)
- dma_unmap_sg(host->dma.chan->device->dev,
- data->sg, data->sg_len,
- ((data->flags & MMC_DATA_WRITE)
- ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-}
-
-static void atmci_stop_dma(struct atmel_mci *host)
-{
- struct dma_chan *chan = host->data_chan;
-
- if (chan) {
- dmaengine_terminate_all(chan);
- atmci_dma_cleanup(host);
+ if (dir == XFER_RECEIVE) {
+ pointer_reg = ATMEL_PDC_RPR;
+ counter_reg = ATMEL_PDC_RCR;
} else {
- /* Data transfer was stopped by the interrupt handler */
- atmci_set_pending(host, EVENT_XFER_COMPLETE);
- mci_writel(host, IER, MCI_NOTBUSY);
+ pointer_reg = ATMEL_PDC_TPR;
+ counter_reg = ATMEL_PDC_TCR;
+ }
+
+ if (buf_nb == PDC_SECOND_BUF) {
+ pointer_reg += ATMEL_PDC_SCND_BUF_OFF;
+ counter_reg += ATMEL_PDC_SCND_BUF_OFF;
+ }
+
+ atmci_writel(host, pointer_reg, sg_dma_address(host->sg));
+ if (host->data_size <= sg_dma_len(host->sg)) {
+ if (host->data_size & 0x3) {
+ /* If size is different from modulo 4, transfer bytes */
+ atmci_writel(host, counter_reg, host->data_size);
+ atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE);
+ } else {
+ /* Else transfer 32-bits words */
+ atmci_writel(host, counter_reg, host->data_size / 4);
+ }
+ host->data_size = 0;
+ } else {
+ /* We assume the size of a page is 32-bits aligned */
+ atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4);
+ host->data_size -= sg_dma_len(host->sg);
+ if (host->data_size)
+ host->sg = sg_next(host->sg);
}
}
-/* This function is called by the DMA driver from tasklet context. */
+/*
+ * Configure PDC buffer according to the data size ie configuring one or two
+ * buffers. Don't use this function if you want to configure only the second
+ * buffer. In this case, use atmci_pdc_set_single_buf.
+ */
+static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir)
+{
+ atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF);
+ if (host->data_size)
+ atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF);
+}
+
+/*
+ * Unmap sg lists, called when transfer is finished.
+ */
+static void atmci_pdc_cleanup(struct atmel_mci *host)
+{
+ struct mmc_data *data = host->data;
+
+ if (data)
+ dma_unmap_sg(&host->pdev->dev,
+ data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+}
+
+/*
+ * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after
+ * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY
+ * interrupt needed for both transfer directions.
+ */
+static void atmci_pdc_complete(struct atmel_mci *host)
+{
+ atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+ atmci_pdc_cleanup(host);
+
+ /*
+ * If the card was removed, data will be NULL. No point trying
+ * to send the stop command or waiting for NBUSY in this case.
+ */
+ if (host->data) {
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ tasklet_schedule(&host->tasklet);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ }
+}
+
+static void atmci_dma_cleanup(struct atmel_mci *host)
+{
+ struct mmc_data *data = host->data;
+
+ if (data)
+ dma_unmap_sg(host->dma.chan->device->dev,
+ data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_WRITE)
+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+}
+
+/*
+ * This function is called by the DMA driver from tasklet context.
+ */
static void atmci_dma_complete(void *arg)
{
struct atmel_mci *host = arg;
@@ -607,9 +695,9 @@
dev_vdbg(&host->pdev->dev, "DMA complete\n");
- if (atmci_is_mci2())
+ if (host->caps.has_dma)
/* Disable DMA hardware handshaking on MCI */
- mci_writel(host, DMA, mci_readl(host, DMA) & ~MCI_DMAEN);
+ atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN);
atmci_dma_cleanup(host);
@@ -641,99 +729,10 @@
* completion callback" rule of the dma engine
* framework.
*/
- mci_writel(host, IER, MCI_NOTBUSY);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
}
}
-static int
-atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
-{
- struct dma_chan *chan;
- struct dma_async_tx_descriptor *desc;
- struct scatterlist *sg;
- unsigned int i;
- enum dma_data_direction direction;
- unsigned int sglen;
-
- /*
- * We don't do DMA on "complex" transfers, i.e. with
- * non-word-aligned buffers or lengths. Also, we don't bother
- * with all the DMA setup overhead for short transfers.
- */
- if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
- return -EINVAL;
- if (data->blksz & 3)
- return -EINVAL;
-
- for_each_sg(data->sg, sg, data->sg_len, i) {
- if (sg->offset & 3 || sg->length & 3)
- return -EINVAL;
- }
-
- /* If we don't have a channel, we can't do DMA */
- chan = host->dma.chan;
- if (chan)
- host->data_chan = chan;
-
- if (!chan)
- return -ENODEV;
-
- if (atmci_is_mci2())
- mci_writel(host, DMA, MCI_DMA_CHKSIZE(3) | MCI_DMAEN);
-
- if (data->flags & MMC_DATA_READ)
- direction = DMA_FROM_DEVICE;
- else
- direction = DMA_TO_DEVICE;
-
- sglen = dma_map_sg(chan->device->dev, data->sg,
- data->sg_len, direction);
-
- desc = chan->device->device_prep_slave_sg(chan,
- data->sg, sglen, direction,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc)
- goto unmap_exit;
-
- host->dma.data_desc = desc;
- desc->callback = atmci_dma_complete;
- desc->callback_param = host;
-
- return 0;
-unmap_exit:
- dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction);
- return -ENOMEM;
-}
-
-static void atmci_submit_data(struct atmel_mci *host)
-{
- struct dma_chan *chan = host->data_chan;
- struct dma_async_tx_descriptor *desc = host->dma.data_desc;
-
- if (chan) {
- dmaengine_submit(desc);
- dma_async_issue_pending(chan);
- }
-}
-
-#else /* CONFIG_MMC_ATMELMCI_DMA */
-
-static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
-{
- return -ENOSYS;
-}
-
-static void atmci_submit_data(struct atmel_mci *host) {}
-
-static void atmci_stop_dma(struct atmel_mci *host)
-{
- /* Data transfer was stopped by the interrupt handler */
- atmci_set_pending(host, EVENT_XFER_COMPLETE);
- mci_writel(host, IER, MCI_NOTBUSY);
-}
-
-#endif /* CONFIG_MMC_ATMELMCI_DMA */
-
/*
* Returns a mask of interrupt flags to be enabled after the whole
* request has been prepared.
@@ -744,36 +743,210 @@
data->error = -EINPROGRESS;
+ host->sg = data->sg;
+ host->data = data;
+ host->data_chan = NULL;
+
+ iflags = ATMCI_DATA_ERROR_FLAGS;
+
+ /*
+ * Errata: MMC data write operation with less than 12
+ * bytes is impossible.
+ *
+ * Errata: MCI Transmit Data Register (TDR) FIFO
+ * corruption when length is not multiple of 4.
+ */
+ if (data->blocks * data->blksz < 12
+ || (data->blocks * data->blksz) & 3)
+ host->need_reset = true;
+
+ host->pio_offset = 0;
+ if (data->flags & MMC_DATA_READ)
+ iflags |= ATMCI_RXRDY;
+ else
+ iflags |= ATMCI_TXRDY;
+
+ return iflags;
+}
+
+/*
+ * Set interrupt flags and set block length into the MCI mode register even
+ * if this value is also accessible in the MCI block register. It seems to be
+ * necessary before the High Speed MCI version. It also map sg and configure
+ * PDC registers.
+ */
+static u32
+atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
+{
+ u32 iflags, tmp;
+ unsigned int sg_len;
+ enum dma_data_direction dir;
+
+ data->error = -EINPROGRESS;
+
+ host->data = data;
+ host->sg = data->sg;
+ iflags = ATMCI_DATA_ERROR_FLAGS;
+
+ /* Enable pdc mode */
+ atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE);
+
+ if (data->flags & MMC_DATA_READ) {
+ dir = DMA_FROM_DEVICE;
+ iflags |= ATMCI_ENDRX | ATMCI_RXBUFF;
+ } else {
+ dir = DMA_TO_DEVICE;
+ iflags |= ATMCI_ENDTX | ATMCI_TXBUFE;
+ }
+
+ /* Set BLKLEN */
+ tmp = atmci_readl(host, ATMCI_MR);
+ tmp &= 0x0000ffff;
+ tmp |= ATMCI_BLKLEN(data->blksz);
+ atmci_writel(host, ATMCI_MR, tmp);
+
+ /* Configure PDC */
+ host->data_size = data->blocks * data->blksz;
+ sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir);
+ if (host->data_size)
+ atmci_pdc_set_both_buf(host,
+ ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT));
+
+ return iflags;
+}
+
+static u32
+atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
+{
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sg;
+ unsigned int i;
+ enum dma_data_direction direction;
+ unsigned int sglen;
+ u32 iflags;
+
+ data->error = -EINPROGRESS;
+
WARN_ON(host->data);
host->sg = NULL;
host->data = data;
iflags = ATMCI_DATA_ERROR_FLAGS;
- if (atmci_prepare_data_dma(host, data)) {
- host->data_chan = NULL;
- /*
- * Errata: MMC data write operation with less than 12
- * bytes is impossible.
- *
- * Errata: MCI Transmit Data Register (TDR) FIFO
- * corruption when length is not multiple of 4.
- */
- if (data->blocks * data->blksz < 12
- || (data->blocks * data->blksz) & 3)
- host->need_reset = true;
+ /*
+ * We don't do DMA on "complex" transfers, i.e. with
+ * non-word-aligned buffers or lengths. Also, we don't bother
+ * with all the DMA setup overhead for short transfers.
+ */
+ if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
+ return atmci_prepare_data(host, data);
+ if (data->blksz & 3)
+ return atmci_prepare_data(host, data);
- host->sg = data->sg;
- host->pio_offset = 0;
- if (data->flags & MMC_DATA_READ)
- iflags |= MCI_RXRDY;
- else
- iflags |= MCI_TXRDY;
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->offset & 3 || sg->length & 3)
+ return atmci_prepare_data(host, data);
}
+ /* If we don't have a channel, we can't do DMA */
+ chan = host->dma.chan;
+ if (chan)
+ host->data_chan = chan;
+
+ if (!chan)
+ return -ENODEV;
+
+ if (host->caps.has_dma)
+ atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ sglen = dma_map_sg(chan->device->dev, data->sg,
+ data->sg_len, direction);
+
+ desc = chan->device->device_prep_slave_sg(chan,
+ data->sg, sglen, direction,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto unmap_exit;
+
+ host->dma.data_desc = desc;
+ desc->callback = atmci_dma_complete;
+ desc->callback_param = host;
+
return iflags;
+unmap_exit:
+ dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction);
+ return -ENOMEM;
}
+static void
+atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
+{
+ return;
+}
+
+/*
+ * Start PDC according to transfer direction.
+ */
+static void
+atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data)
+{
+ if (data->flags & MMC_DATA_READ)
+ atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
+ else
+ atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
+}
+
+static void
+atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
+{
+ struct dma_chan *chan = host->data_chan;
+ struct dma_async_tx_descriptor *desc = host->dma.data_desc;
+
+ if (chan) {
+ dmaengine_submit(desc);
+ dma_async_issue_pending(chan);
+ }
+}
+
+static void atmci_stop_transfer(struct atmel_mci *host)
+{
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+}
+
+/*
+ * Stop data transfer because error(s) occured.
+ */
+static void atmci_stop_transfer_pdc(struct atmel_mci *host)
+{
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+}
+
+static void atmci_stop_transfer_dma(struct atmel_mci *host)
+{
+ struct dma_chan *chan = host->data_chan;
+
+ if (chan) {
+ dmaengine_terminate_all(chan);
+ atmci_dma_cleanup(host);
+ } else {
+ /* Data transfer was stopped by the interrupt handler */
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ }
+}
+
+/*
+ * Start a request: prepare data if needed, prepare the command and activate
+ * interrupts.
+ */
static void atmci_start_request(struct atmel_mci *host,
struct atmel_mci_slot *slot)
{
@@ -792,24 +965,24 @@
host->data_status = 0;
if (host->need_reset) {
- mci_writel(host, CR, MCI_CR_SWRST);
- mci_writel(host, CR, MCI_CR_MCIEN);
- mci_writel(host, MR, host->mode_reg);
- if (atmci_is_mci2())
- mci_writel(host, CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
host->need_reset = false;
}
- mci_writel(host, SDCR, slot->sdc_reg);
+ atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
- iflags = mci_readl(host, IMR);
- if (iflags & ~(MCI_SDIOIRQA | MCI_SDIOIRQB))
+ iflags = atmci_readl(host, ATMCI_IMR);
+ if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
iflags);
if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
/* Send init sequence (74 clock cycles) */
- mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
- while (!(mci_readl(host, SR) & MCI_CMDRDY))
+ atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT);
+ while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY))
cpu_relax();
}
iflags = 0;
@@ -818,31 +991,31 @@
atmci_set_timeout(host, slot, data);
/* Must set block count/size before sending command */
- mci_writel(host, BLKR, MCI_BCNT(data->blocks)
- | MCI_BLKLEN(data->blksz));
+ atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks)
+ | ATMCI_BLKLEN(data->blksz));
dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
- MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
+ ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz));
- iflags |= atmci_prepare_data(host, data);
+ iflags |= host->prepare_data(host, data);
}
- iflags |= MCI_CMDRDY;
+ iflags |= ATMCI_CMDRDY;
cmd = mrq->cmd;
cmdflags = atmci_prepare_command(slot->mmc, cmd);
- atmci_start_command(host, cmd, cmdflags);
+ atmci_send_command(host, cmd, cmdflags);
if (data)
- atmci_submit_data(host);
+ host->submit_data(host, data);
if (mrq->stop) {
host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
- host->stop_cmdr |= MCI_CMDR_STOP_XFER;
+ host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
if (!(data->flags & MMC_DATA_WRITE))
- host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
+ host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ;
if (data->flags & MMC_DATA_STREAM)
- host->stop_cmdr |= MCI_CMDR_STREAM;
+ host->stop_cmdr |= ATMCI_CMDR_STREAM;
else
- host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK;
+ host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK;
}
/*
@@ -851,7 +1024,7 @@
* conditions (e.g. command and data complete, but stop not
* prepared yet.)
*/
- mci_writel(host, IER, iflags);
+ atmci_writel(host, ATMCI_IER, iflags);
}
static void atmci_queue_request(struct atmel_mci *host,
@@ -909,13 +1082,13 @@
struct atmel_mci *host = slot->host;
unsigned int i;
- slot->sdc_reg &= ~MCI_SDCBUS_MASK;
+ slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
switch (ios->bus_width) {
case MMC_BUS_WIDTH_1:
- slot->sdc_reg |= MCI_SDCBUS_1BIT;
+ slot->sdc_reg |= ATMCI_SDCBUS_1BIT;
break;
case MMC_BUS_WIDTH_4:
- slot->sdc_reg |= MCI_SDCBUS_4BIT;
+ slot->sdc_reg |= ATMCI_SDCBUS_4BIT;
break;
}
@@ -926,10 +1099,10 @@
spin_lock_bh(&host->lock);
if (!host->mode_reg) {
clk_enable(host->mck);
- mci_writel(host, CR, MCI_CR_SWRST);
- mci_writel(host, CR, MCI_CR_MCIEN);
- if (atmci_is_mci2())
- mci_writel(host, CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
}
/*
@@ -937,7 +1110,7 @@
* core ios update when finding the minimum.
*/
slot->clock = ios->clock;
- for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
if (host->slot[i] && host->slot[i]->clock
&& host->slot[i]->clock < clock_min)
clock_min = host->slot[i]->clock;
@@ -952,28 +1125,28 @@
clkdiv = 255;
}
- host->mode_reg = MCI_MR_CLKDIV(clkdiv);
+ host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
/*
* WRPROOF and RDPROOF prevent overruns/underruns by
* stopping the clock when the FIFO is full/empty.
* This state is not expected to last for long.
*/
- if (mci_has_rwproof())
- host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF);
+ if (host->caps.has_rwproof)
+ host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF);
- if (atmci_is_mci2()) {
+ if (host->caps.has_cfg_reg) {
/* setup High Speed mode in relation with card capacity */
if (ios->timing == MMC_TIMING_SD_HS)
- host->cfg_reg |= MCI_CFG_HSMODE;
+ host->cfg_reg |= ATMCI_CFG_HSMODE;
else
- host->cfg_reg &= ~MCI_CFG_HSMODE;
+ host->cfg_reg &= ~ATMCI_CFG_HSMODE;
}
if (list_empty(&host->queue)) {
- mci_writel(host, MR, host->mode_reg);
- if (atmci_is_mci2())
- mci_writel(host, CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
} else {
host->need_clock_update = true;
}
@@ -984,16 +1157,16 @@
spin_lock_bh(&host->lock);
slot->clock = 0;
- for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
if (host->slot[i] && host->slot[i]->clock) {
any_slot_active = true;
break;
}
}
if (!any_slot_active) {
- mci_writel(host, CR, MCI_CR_MCIDIS);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
if (host->mode_reg) {
- mci_readl(host, MR);
+ atmci_readl(host, ATMCI_MR);
clk_disable(host->mck);
}
host->mode_reg = 0;
@@ -1057,9 +1230,9 @@
struct atmel_mci *host = slot->host;
if (enable)
- mci_writel(host, IER, slot->sdio_irq);
+ atmci_writel(host, ATMCI_IER, slot->sdio_irq);
else
- mci_writel(host, IDR, slot->sdio_irq);
+ atmci_writel(host, ATMCI_IDR, slot->sdio_irq);
}
static const struct mmc_host_ops atmci_ops = {
@@ -1086,9 +1259,9 @@
* busy transferring data.
*/
if (host->need_clock_update) {
- mci_writel(host, MR, host->mode_reg);
- if (atmci_is_mci2())
- mci_writel(host, CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
}
host->cur_slot->mrq = NULL;
@@ -1117,16 +1290,16 @@
u32 status = host->cmd_status;
/* Read the response from the card (up to 16 bytes) */
- cmd->resp[0] = mci_readl(host, RSPR);
- cmd->resp[1] = mci_readl(host, RSPR);
- cmd->resp[2] = mci_readl(host, RSPR);
- cmd->resp[3] = mci_readl(host, RSPR);
+ cmd->resp[0] = atmci_readl(host, ATMCI_RSPR);
+ cmd->resp[1] = atmci_readl(host, ATMCI_RSPR);
+ cmd->resp[2] = atmci_readl(host, ATMCI_RSPR);
+ cmd->resp[3] = atmci_readl(host, ATMCI_RSPR);
- if (status & MCI_RTOE)
+ if (status & ATMCI_RTOE)
cmd->error = -ETIMEDOUT;
- else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE))
+ else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE))
cmd->error = -EILSEQ;
- else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE))
+ else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE))
cmd->error = -EIO;
else
cmd->error = 0;
@@ -1136,10 +1309,10 @@
"command error: status=0x%08x\n", status);
if (cmd->data) {
- atmci_stop_dma(host);
+ host->stop_transfer(host);
host->data = NULL;
- mci_writel(host, IDR, MCI_NOTBUSY
- | MCI_TXRDY | MCI_RXRDY
+ atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY
+ | ATMCI_TXRDY | ATMCI_RXRDY
| ATMCI_DATA_ERROR_FLAGS);
}
}
@@ -1191,11 +1364,11 @@
* Reset controller to terminate any ongoing
* commands or data transfers.
*/
- mci_writel(host, CR, MCI_CR_SWRST);
- mci_writel(host, CR, MCI_CR_MCIEN);
- mci_writel(host, MR, host->mode_reg);
- if (atmci_is_mci2())
- mci_writel(host, CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
host->data = NULL;
host->cmd = NULL;
@@ -1210,7 +1383,7 @@
/* fall through */
case STATE_SENDING_DATA:
mrq->data->error = -ENOMEDIUM;
- atmci_stop_dma(host);
+ host->stop_transfer(host);
break;
case STATE_DATA_BUSY:
case STATE_DATA_ERROR:
@@ -1261,7 +1434,7 @@
dev_vdbg(&host->pdev->dev,
"tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
state, host->pending_events, host->completed_events,
- mci_readl(host, IMR));
+ atmci_readl(host, ATMCI_IMR));
do {
prev_state = state;
@@ -1289,9 +1462,9 @@
case STATE_SENDING_DATA:
if (atmci_test_and_clear_pending(host,
EVENT_DATA_ERROR)) {
- atmci_stop_dma(host);
+ host->stop_transfer(host);
if (data->stop)
- send_stop_cmd(host, data);
+ atmci_send_stop_cmd(host, data);
state = STATE_DATA_ERROR;
break;
}
@@ -1313,11 +1486,11 @@
atmci_set_completed(host, EVENT_DATA_COMPLETE);
status = host->data_status;
if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) {
- if (status & MCI_DTOE) {
+ if (status & ATMCI_DTOE) {
dev_dbg(&host->pdev->dev,
"data timeout error\n");
data->error = -ETIMEDOUT;
- } else if (status & MCI_DCRCE) {
+ } else if (status & ATMCI_DCRCE) {
dev_dbg(&host->pdev->dev,
"data CRC error\n");
data->error = -EILSEQ;
@@ -1330,7 +1503,7 @@
} else {
data->bytes_xfered = data->blocks * data->blksz;
data->error = 0;
- mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS);
+ atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS);
}
if (!data->stop) {
@@ -1340,7 +1513,7 @@
prev_state = state = STATE_SENDING_STOP;
if (!data->error)
- send_stop_cmd(host, data);
+ atmci_send_stop_cmd(host, data);
/* fall through */
case STATE_SENDING_STOP:
@@ -1380,7 +1553,7 @@
unsigned int nbytes = 0;
do {
- value = mci_readl(host, RDR);
+ value = atmci_readl(host, ATMCI_RDR);
if (likely(offset + 4 <= sg->length)) {
put_unaligned(value, (u32 *)(buf + offset));
@@ -1412,9 +1585,9 @@
nbytes += offset;
}
- status = mci_readl(host, SR);
+ status = atmci_readl(host, ATMCI_SR);
if (status & ATMCI_DATA_ERROR_FLAGS) {
- mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
+ atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY
| ATMCI_DATA_ERROR_FLAGS));
host->data_status = status;
data->bytes_xfered += nbytes;
@@ -1423,7 +1596,7 @@
tasklet_schedule(&host->tasklet);
return;
}
- } while (status & MCI_RXRDY);
+ } while (status & ATMCI_RXRDY);
host->pio_offset = offset;
data->bytes_xfered += nbytes;
@@ -1431,8 +1604,8 @@
return;
done:
- mci_writel(host, IDR, MCI_RXRDY);
- mci_writel(host, IER, MCI_NOTBUSY);
+ atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
data->bytes_xfered += nbytes;
smp_wmb();
atmci_set_pending(host, EVENT_XFER_COMPLETE);
@@ -1451,7 +1624,7 @@
do {
if (likely(offset + 4 <= sg->length)) {
value = get_unaligned((u32 *)(buf + offset));
- mci_writel(host, TDR, value);
+ atmci_writel(host, ATMCI_TDR, value);
offset += 4;
nbytes += 4;
@@ -1472,20 +1645,20 @@
host->sg = sg = sg_next(sg);
if (!sg) {
- mci_writel(host, TDR, value);
+ atmci_writel(host, ATMCI_TDR, value);
goto done;
}
offset = 4 - remaining;
buf = sg_virt(sg);
memcpy((u8 *)&value + remaining, buf, offset);
- mci_writel(host, TDR, value);
+ atmci_writel(host, ATMCI_TDR, value);
nbytes += offset;
}
- status = mci_readl(host, SR);
+ status = atmci_readl(host, ATMCI_SR);
if (status & ATMCI_DATA_ERROR_FLAGS) {
- mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
+ atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY
| ATMCI_DATA_ERROR_FLAGS));
host->data_status = status;
data->bytes_xfered += nbytes;
@@ -1494,7 +1667,7 @@
tasklet_schedule(&host->tasklet);
return;
}
- } while (status & MCI_TXRDY);
+ } while (status & ATMCI_TXRDY);
host->pio_offset = offset;
data->bytes_xfered += nbytes;
@@ -1502,8 +1675,8 @@
return;
done:
- mci_writel(host, IDR, MCI_TXRDY);
- mci_writel(host, IER, MCI_NOTBUSY);
+ atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
data->bytes_xfered += nbytes;
smp_wmb();
atmci_set_pending(host, EVENT_XFER_COMPLETE);
@@ -1511,7 +1684,7 @@
static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status)
{
- mci_writel(host, IDR, MCI_CMDRDY);
+ atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY);
host->cmd_status = status;
smp_wmb();
@@ -1523,7 +1696,7 @@
{
int i;
- for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
struct atmel_mci_slot *slot = host->slot[i];
if (slot && (status & slot->sdio_irq)) {
mmc_signal_sdio_irq(slot->mmc);
@@ -1539,40 +1712,92 @@
unsigned int pass_count = 0;
do {
- status = mci_readl(host, SR);
- mask = mci_readl(host, IMR);
+ status = atmci_readl(host, ATMCI_SR);
+ mask = atmci_readl(host, ATMCI_IMR);
pending = status & mask;
if (!pending)
break;
if (pending & ATMCI_DATA_ERROR_FLAGS) {
- mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
- | MCI_RXRDY | MCI_TXRDY);
- pending &= mci_readl(host, IMR);
+ atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS
+ | ATMCI_RXRDY | ATMCI_TXRDY);
+ pending &= atmci_readl(host, ATMCI_IMR);
host->data_status = status;
smp_wmb();
atmci_set_pending(host, EVENT_DATA_ERROR);
tasklet_schedule(&host->tasklet);
}
- if (pending & MCI_NOTBUSY) {
- mci_writel(host, IDR,
- ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY);
+
+ if (pending & ATMCI_TXBUFE) {
+ atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE);
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
+ /*
+ * We can receive this interruption before having configured
+ * the second pdc buffer, so we need to reconfigure first and
+ * second buffers again
+ */
+ if (host->data_size) {
+ atmci_pdc_set_both_buf(host, XFER_TRANSMIT);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
+ atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE);
+ } else {
+ atmci_pdc_complete(host);
+ }
+ } else if (pending & ATMCI_ENDTX) {
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
+
+ if (host->data_size) {
+ atmci_pdc_set_single_buf(host,
+ XFER_TRANSMIT, PDC_SECOND_BUF);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
+ }
+ }
+
+ if (pending & ATMCI_RXBUFF) {
+ atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF);
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
+ /*
+ * We can receive this interruption before having configured
+ * the second pdc buffer, so we need to reconfigure first and
+ * second buffers again
+ */
+ if (host->data_size) {
+ atmci_pdc_set_both_buf(host, XFER_RECEIVE);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
+ atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF);
+ } else {
+ atmci_pdc_complete(host);
+ }
+ } else if (pending & ATMCI_ENDRX) {
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
+
+ if (host->data_size) {
+ atmci_pdc_set_single_buf(host,
+ XFER_RECEIVE, PDC_SECOND_BUF);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
+ }
+ }
+
+
+ if (pending & ATMCI_NOTBUSY) {
+ atmci_writel(host, ATMCI_IDR,
+ ATMCI_DATA_ERROR_FLAGS | ATMCI_NOTBUSY);
if (!host->data_status)
host->data_status = status;
smp_wmb();
atmci_set_pending(host, EVENT_DATA_COMPLETE);
tasklet_schedule(&host->tasklet);
}
- if (pending & MCI_RXRDY)
+ if (pending & ATMCI_RXRDY)
atmci_read_data_pio(host);
- if (pending & MCI_TXRDY)
+ if (pending & ATMCI_TXRDY)
atmci_write_data_pio(host);
- if (pending & MCI_CMDRDY)
+ if (pending & ATMCI_CMDRDY)
atmci_cmd_interrupt(host, status);
- if (pending & (MCI_SDIOIRQA | MCI_SDIOIRQB))
+ if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
atmci_sdio_interrupt(host, status);
} while (pass_count++ < 5);
@@ -1621,7 +1846,7 @@
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
if (sdio_irq)
mmc->caps |= MMC_CAP_SDIO_IRQ;
- if (atmci_is_mci2())
+ if (host->caps.has_highspeed)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
if (slot_data->bus_width >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
@@ -1704,8 +1929,7 @@
mmc_free_host(slot->mmc);
}
-#ifdef CONFIG_MMC_ATMELMCI_DMA
-static bool filter(struct dma_chan *chan, void *slave)
+static bool atmci_filter(struct dma_chan *chan, void *slave)
{
struct mci_dma_data *sl = slave;
@@ -1730,14 +1954,14 @@
dma_cap_mask_t mask;
setup_dma_addr(pdata->dma_slave,
- host->mapbase + MCI_TDR,
- host->mapbase + MCI_RDR);
+ host->mapbase + ATMCI_TDR,
+ host->mapbase + ATMCI_RDR);
/* Try to grab a DMA channel */
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
host->dma.chan =
- dma_request_channel(mask, filter, pdata->dma_slave);
+ dma_request_channel(mask, atmci_filter, pdata->dma_slave);
}
if (!host->dma.chan)
dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
@@ -1746,9 +1970,60 @@
"Using %s for DMA transfers\n",
dma_chan_name(host->dma.chan));
}
+
+static inline unsigned int atmci_get_version(struct atmel_mci *host)
+{
+ return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
+}
+
+/*
+ * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
+ * HSMCI provides DMA support and a new config register but no more supports
+ * PDC.
+ */
+static void __init atmci_get_cap(struct atmel_mci *host)
+{
+ unsigned int version;
+
+ version = atmci_get_version(host);
+ dev_info(&host->pdev->dev,
+ "version: 0x%x\n", version);
+
+ host->caps.has_dma = 0;
+ host->caps.has_pdc = 0;
+ host->caps.has_cfg_reg = 0;
+ host->caps.has_cstor_reg = 0;
+ host->caps.has_highspeed = 0;
+ host->caps.has_rwproof = 0;
+
+ /* keep only major version number */
+ switch (version & 0xf00) {
+ case 0x100:
+ case 0x200:
+ host->caps.has_pdc = 1;
+ host->caps.has_rwproof = 1;
+ break;
+ case 0x300:
+ case 0x400:
+ case 0x500:
+#ifdef CONFIG_AT_HDMAC
+ host->caps.has_dma = 1;
#else
-static void atmci_configure_dma(struct atmel_mci *host) {}
+ host->caps.has_dma = 0;
+ dev_info(&host->pdev->dev,
+ "has dma capability but dma engine is not selected, then use pio\n");
#endif
+ host->caps.has_cfg_reg = 1;
+ host->caps.has_cstor_reg = 1;
+ host->caps.has_highspeed = 1;
+ host->caps.has_rwproof = 1;
+ break;
+ default:
+ dev_warn(&host->pdev->dev,
+ "Unmanaged mci version, set minimum capabilities\n");
+ break;
+ }
+}
static int __init atmci_probe(struct platform_device *pdev)
{
@@ -1789,7 +2064,7 @@
goto err_ioremap;
clk_enable(host->mck);
- mci_writel(host, CR, MCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
host->bus_hz = clk_get_rate(host->mck);
clk_disable(host->mck);
@@ -1801,7 +2076,27 @@
if (ret)
goto err_request_irq;
- atmci_configure_dma(host);
+ /* Get MCI capabilities and set operations according to it */
+ atmci_get_cap(host);
+ if (host->caps.has_dma) {
+ dev_info(&pdev->dev, "using DMA\n");
+ host->prepare_data = &atmci_prepare_data_dma;
+ host->submit_data = &atmci_submit_data_dma;
+ host->stop_transfer = &atmci_stop_transfer_dma;
+ } else if (host->caps.has_pdc) {
+ dev_info(&pdev->dev, "using PDC\n");
+ host->prepare_data = &atmci_prepare_data_pdc;
+ host->submit_data = &atmci_submit_data_pdc;
+ host->stop_transfer = &atmci_stop_transfer_pdc;
+ } else {
+ dev_info(&pdev->dev, "no DMA, no PDC\n");
+ host->prepare_data = &atmci_prepare_data;
+ host->submit_data = &atmci_submit_data;
+ host->stop_transfer = &atmci_stop_transfer;
+ }
+
+ if (host->caps.has_dma)
+ atmci_configure_dma(host);
platform_set_drvdata(pdev, host);
@@ -1810,13 +2105,13 @@
ret = -ENODEV;
if (pdata->slot[0].bus_width) {
ret = atmci_init_slot(host, &pdata->slot[0],
- 0, MCI_SDCSEL_SLOT_A, MCI_SDIOIRQA);
+ 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA);
if (!ret)
nr_slots++;
}
if (pdata->slot[1].bus_width) {
ret = atmci_init_slot(host, &pdata->slot[1],
- 1, MCI_SDCSEL_SLOT_B, MCI_SDIOIRQB);
+ 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB);
if (!ret)
nr_slots++;
}
@@ -1833,10 +2128,8 @@
return 0;
err_init_slot:
-#ifdef CONFIG_MMC_ATMELMCI_DMA
if (host->dma.chan)
dma_release_channel(host->dma.chan);
-#endif
free_irq(irq, host);
err_request_irq:
iounmap(host->regs);
@@ -1854,15 +2147,15 @@
platform_set_drvdata(pdev, NULL);
- for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
if (host->slot[i])
atmci_cleanup_slot(host->slot[i], i);
}
clk_enable(host->mck);
- mci_writel(host, IDR, ~0UL);
- mci_writel(host, CR, MCI_CR_MCIDIS);
- mci_readl(host, SR);
+ atmci_writel(host, ATMCI_IDR, ~0UL);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
+ atmci_readl(host, ATMCI_SR);
clk_disable(host->mck);
#ifdef CONFIG_MMC_ATMELMCI_DMA
@@ -1885,7 +2178,7 @@
struct atmel_mci *host = dev_get_drvdata(dev);
int i;
- for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
struct atmel_mci_slot *slot = host->slot[i];
int ret;
@@ -1916,7 +2209,7 @@
int i;
int ret = 0;
- for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
struct atmel_mci_slot *slot = host->slot[i];
int err;
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index ef72e87..707bc7dd 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -55,7 +55,7 @@
#ifdef DEBUG
#define DBG(fmt, idx, args...) \
- printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args)
+ pr_debug("au1xmmc(%d): DEBUG: " fmt, idx, ##args)
#else
#define DBG(fmt, idx, args...) do {} while (0)
#endif
@@ -268,7 +268,7 @@
mmccmd |= SD_CMD_RT_3;
break;
default:
- printk(KERN_INFO "au1xmmc: unhandled response type %02x\n",
+ pr_info("au1xmmc: unhandled response type %02x\n",
mmc_resp_type(cmd));
return -EINVAL;
}
@@ -1031,7 +1031,7 @@
#ifdef CONFIG_SOC_AU1200
ret = au1xmmc_dbdma_init(host);
if (ret)
- printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n");
+ pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
#endif
#ifdef CONFIG_LEDS_CLASS
@@ -1056,7 +1056,7 @@
platform_set_drvdata(pdev, host);
- printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
+ pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X"
" (mode=%s)\n", pdev->id, host->iobase,
host->flags & HOST_F_DMA ? "dma" : "pio");
@@ -1188,7 +1188,7 @@
*/
memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
if (!memid)
- printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n");
+ pr_err("au1xmmc: cannot add memory dbdma dev\n");
#endif
return platform_driver_register(&au1xmmc_driver);
}
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 0076c74..64a8325 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -807,12 +807,25 @@
static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmc_davinci_host *host = mmc_priv(mmc);
+ struct platform_device *pdev = to_platform_device(mmc->parent);
+ struct davinci_mmc_config *config = pdev->dev.platform_data;
dev_dbg(mmc_dev(host->mmc),
"clock %dHz busmode %d powermode %d Vdd %04x\n",
ios->clock, ios->bus_mode, ios->power_mode,
ios->vdd);
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ if (config && config->set_power)
+ config->set_power(pdev->id, false);
+ break;
+ case MMC_POWER_UP:
+ if (config && config->set_power)
+ config->set_power(pdev->id, true);
+ break;
+ }
+
switch (ios->bus_width) {
case MMC_BUS_WIDTH_8:
dev_dbg(mmc_dev(host->mmc), "Enabling 8 bit mode\n");
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index ff0f714..3aaeb084 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -764,11 +764,29 @@
return present;
}
+static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
+{
+ struct dw_mci_slot *slot = mmc_priv(mmc);
+ struct dw_mci *host = slot->host;
+ u32 int_mask;
+
+ /* Enable/disable Slot Specific SDIO interrupt */
+ int_mask = mci_readl(host, INTMASK);
+ if (enb) {
+ mci_writel(host, INTMASK,
+ (int_mask | (1 << SDMMC_INT_SDIO(slot->id))));
+ } else {
+ mci_writel(host, INTMASK,
+ (int_mask & ~(1 << SDMMC_INT_SDIO(slot->id))));
+ }
+}
+
static const struct mmc_host_ops dw_mci_ops = {
- .request = dw_mci_request,
- .set_ios = dw_mci_set_ios,
- .get_ro = dw_mci_get_ro,
- .get_cd = dw_mci_get_cd,
+ .request = dw_mci_request,
+ .set_ios = dw_mci_set_ios,
+ .get_ro = dw_mci_get_ro,
+ .get_cd = dw_mci_get_cd,
+ .enable_sdio_irq = dw_mci_enable_sdio_irq,
};
static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
@@ -1025,7 +1043,8 @@
buf += len;
cnt -= len;
if (!sg_next(host->sg) || host->part_buf_count == 2) {
- mci_writew(host, DATA, host->part_buf16);
+ mci_writew(host, DATA(host->data_offset),
+ host->part_buf16);
host->part_buf_count = 0;
}
}
@@ -1042,21 +1061,23 @@
cnt -= len;
/* push data from aligned buffer into fifo */
for (i = 0; i < items; ++i)
- mci_writew(host, DATA, aligned_buf[i]);
+ mci_writew(host, DATA(host->data_offset),
+ aligned_buf[i]);
}
} else
#endif
{
u16 *pdata = buf;
for (; cnt >= 2; cnt -= 2)
- mci_writew(host, DATA, *pdata++);
+ mci_writew(host, DATA(host->data_offset), *pdata++);
buf = pdata;
}
/* put anything remaining in the part_buf */
if (cnt) {
dw_mci_set_part_bytes(host, buf, cnt);
if (!sg_next(host->sg))
- mci_writew(host, DATA, host->part_buf16);
+ mci_writew(host, DATA(host->data_offset),
+ host->part_buf16);
}
}
@@ -1071,7 +1092,8 @@
int items = len >> 1;
int i;
for (i = 0; i < items; ++i)
- aligned_buf[i] = mci_readw(host, DATA);
+ aligned_buf[i] = mci_readw(host,
+ DATA(host->data_offset));
/* memcpy from aligned buffer into output buffer */
memcpy(buf, aligned_buf, len);
buf += len;
@@ -1082,11 +1104,11 @@
{
u16 *pdata = buf;
for (; cnt >= 2; cnt -= 2)
- *pdata++ = mci_readw(host, DATA);
+ *pdata++ = mci_readw(host, DATA(host->data_offset));
buf = pdata;
}
if (cnt) {
- host->part_buf16 = mci_readw(host, DATA);
+ host->part_buf16 = mci_readw(host, DATA(host->data_offset));
dw_mci_pull_final_bytes(host, buf, cnt);
}
}
@@ -1099,7 +1121,8 @@
buf += len;
cnt -= len;
if (!sg_next(host->sg) || host->part_buf_count == 4) {
- mci_writel(host, DATA, host->part_buf32);
+ mci_writel(host, DATA(host->data_offset),
+ host->part_buf32);
host->part_buf_count = 0;
}
}
@@ -1116,21 +1139,23 @@
cnt -= len;
/* push data from aligned buffer into fifo */
for (i = 0; i < items; ++i)
- mci_writel(host, DATA, aligned_buf[i]);
+ mci_writel(host, DATA(host->data_offset),
+ aligned_buf[i]);
}
} else
#endif
{
u32 *pdata = buf;
for (; cnt >= 4; cnt -= 4)
- mci_writel(host, DATA, *pdata++);
+ mci_writel(host, DATA(host->data_offset), *pdata++);
buf = pdata;
}
/* put anything remaining in the part_buf */
if (cnt) {
dw_mci_set_part_bytes(host, buf, cnt);
if (!sg_next(host->sg))
- mci_writel(host, DATA, host->part_buf32);
+ mci_writel(host, DATA(host->data_offset),
+ host->part_buf32);
}
}
@@ -1145,7 +1170,8 @@
int items = len >> 2;
int i;
for (i = 0; i < items; ++i)
- aligned_buf[i] = mci_readl(host, DATA);
+ aligned_buf[i] = mci_readl(host,
+ DATA(host->data_offset));
/* memcpy from aligned buffer into output buffer */
memcpy(buf, aligned_buf, len);
buf += len;
@@ -1156,11 +1182,11 @@
{
u32 *pdata = buf;
for (; cnt >= 4; cnt -= 4)
- *pdata++ = mci_readl(host, DATA);
+ *pdata++ = mci_readl(host, DATA(host->data_offset));
buf = pdata;
}
if (cnt) {
- host->part_buf32 = mci_readl(host, DATA);
+ host->part_buf32 = mci_readl(host, DATA(host->data_offset));
dw_mci_pull_final_bytes(host, buf, cnt);
}
}
@@ -1173,7 +1199,8 @@
buf += len;
cnt -= len;
if (!sg_next(host->sg) || host->part_buf_count == 8) {
- mci_writew(host, DATA, host->part_buf);
+ mci_writew(host, DATA(host->data_offset),
+ host->part_buf);
host->part_buf_count = 0;
}
}
@@ -1190,21 +1217,23 @@
cnt -= len;
/* push data from aligned buffer into fifo */
for (i = 0; i < items; ++i)
- mci_writeq(host, DATA, aligned_buf[i]);
+ mci_writeq(host, DATA(host->data_offset),
+ aligned_buf[i]);
}
} else
#endif
{
u64 *pdata = buf;
for (; cnt >= 8; cnt -= 8)
- mci_writeq(host, DATA, *pdata++);
+ mci_writeq(host, DATA(host->data_offset), *pdata++);
buf = pdata;
}
/* put anything remaining in the part_buf */
if (cnt) {
dw_mci_set_part_bytes(host, buf, cnt);
if (!sg_next(host->sg))
- mci_writeq(host, DATA, host->part_buf);
+ mci_writeq(host, DATA(host->data_offset),
+ host->part_buf);
}
}
@@ -1219,7 +1248,8 @@
int items = len >> 3;
int i;
for (i = 0; i < items; ++i)
- aligned_buf[i] = mci_readq(host, DATA);
+ aligned_buf[i] = mci_readq(host,
+ DATA(host->data_offset));
/* memcpy from aligned buffer into output buffer */
memcpy(buf, aligned_buf, len);
buf += len;
@@ -1230,11 +1260,11 @@
{
u64 *pdata = buf;
for (; cnt >= 8; cnt -= 8)
- *pdata++ = mci_readq(host, DATA);
+ *pdata++ = mci_readq(host, DATA(host->data_offset));
buf = pdata;
}
if (cnt) {
- host->part_buf = mci_readq(host, DATA);
+ host->part_buf = mci_readq(host, DATA(host->data_offset));
dw_mci_pull_final_bytes(host, buf, cnt);
}
}
@@ -1406,6 +1436,7 @@
struct dw_mci *host = dev_id;
u32 status, pending;
unsigned int pass_count = 0;
+ int i;
do {
status = mci_readl(host, RINTSTS);
@@ -1477,6 +1508,15 @@
queue_work(dw_mci_card_workqueue, &host->card_work);
}
+ /* Handle SDIO Interrupts */
+ for (i = 0; i < host->num_slots; i++) {
+ struct dw_mci_slot *slot = host->slot[i];
+ if (pending & SDMMC_INT_SDIO(i)) {
+ mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
+ mmc_signal_sdio_irq(slot->mmc);
+ }
+ }
+
} while (pass_count++ < 5);
#ifdef CONFIG_MMC_DW_IDMAC
@@ -1673,7 +1713,7 @@
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
if (IS_ERR(host->vmmc)) {
- printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
host->vmmc = NULL;
} else
regulator_enable(host->vmmc);
@@ -1924,6 +1964,18 @@
}
/*
+ * In 2.40a spec, Data offset is changed.
+ * Need to check the version-id and set data-offset for DATA register.
+ */
+ host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
+ dev_info(&pdev->dev, "Version ID is %04x\n", host->verid);
+
+ if (host->verid < DW_MMC_240A)
+ host->data_offset = DATA_OFFSET;
+ else
+ host->data_offset = DATA_240A_OFFSET;
+
+ /*
* Enable interrupts for command done, data over, data empty, card det,
* receive ready and error such as transmit, receive timeout, crc error
*/
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 027d377..72c071f 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -14,6 +14,8 @@
#ifndef _DW_MMC_H_
#define _DW_MMC_H_
+#define DW_MMC_240A 0x240a
+
#define SDMMC_CTRL 0x000
#define SDMMC_PWREN 0x004
#define SDMMC_CLKDIV 0x008
@@ -51,7 +53,14 @@
#define SDMMC_IDINTEN 0x090
#define SDMMC_DSCADDR 0x094
#define SDMMC_BUFADDR 0x098
-#define SDMMC_DATA 0x100
+#define SDMMC_DATA(x) (x)
+
+/*
+ * Data offset is difference according to Version
+ * Lower than 2.40a : data register offest is 0x100
+ */
+#define DATA_OFFSET 0x100
+#define DATA_240A_OFFSET 0x200
/* shift bit field */
#define _SBF(f, v) ((v) << (f))
@@ -82,7 +91,7 @@
#define SDMMC_CTYPE_4BIT BIT(0)
#define SDMMC_CTYPE_1BIT 0
/* Interrupt status & mask register defines */
-#define SDMMC_INT_SDIO BIT(16)
+#define SDMMC_INT_SDIO(n) BIT(16 + (n))
#define SDMMC_INT_EBE BIT(15)
#define SDMMC_INT_ACD BIT(14)
#define SDMMC_INT_SBE BIT(13)
@@ -130,6 +139,8 @@
#define SDMMC_IDMAC_ENABLE BIT(7)
#define SDMMC_IDMAC_FB BIT(1)
#define SDMMC_IDMAC_SWRESET BIT(0)
+/* Version ID register define */
+#define SDMMC_GET_VERID(x) ((x) & 0xFFFF)
/* Register access macros */
#define mci_readl(dev, reg) \
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 881f7ba..ea0f3ce 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -942,7 +942,7 @@
int ret = 0, irq;
u16 rev_no;
- printk(KERN_INFO "i.MX mmc driver\n");
+ pr_info("i.MX mmc driver\n");
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 7c1e16a..92946b8 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -27,6 +27,7 @@
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/bio.h>
#include <linux/dma-mapping.h>
#include <linux/crc7.h>
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 56e9a416..50b5f99 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -29,6 +29,7 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/amba/mmci.h>
+#include <linux/pm_runtime.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -170,6 +171,7 @@
* back into the driver...
*/
spin_unlock(&host->lock);
+ pm_runtime_put(mmc_dev(host->mmc));
mmc_request_done(host->mmc, mrq);
spin_lock(&host->lock);
}
@@ -464,7 +466,7 @@
struct mmci_host_next *next = &host->next_data;
if (data->host_cookie && data->host_cookie != next->cookie) {
- printk(KERN_WARNING "[%s] invalid cookie: data->host_cookie %d"
+ pr_warning("[%s] invalid cookie: data->host_cookie %d"
" host->next_data.cookie %d\n",
__func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
@@ -529,7 +531,7 @@
if (chan) {
if (err)
dmaengine_terminate_all(chan);
- if (err || data->host_cookie)
+ if (data->host_cookie)
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, dir);
mrq->data->host_cookie = 0;
@@ -984,6 +986,8 @@
return;
}
+ pm_runtime_get_sync(mmc_dev(mmc));
+
spin_lock_irqsave(&host->lock, flags);
host->mrq = mrq;
@@ -1156,10 +1160,14 @@
goto host_free;
}
- ret = clk_enable(host->clk);
+ ret = clk_prepare(host->clk);
if (ret)
goto clk_free;
+ ret = clk_enable(host->clk);
+ if (ret)
+ goto clk_unprep;
+
host->plat = plat;
host->variant = variant;
host->mclk = clk_get_rate(host->clk);
@@ -1327,6 +1335,8 @@
mmci_dma_setup(host);
+ pm_runtime_put(&dev->dev);
+
mmc_add_host(mmc);
return 0;
@@ -1345,6 +1355,8 @@
iounmap(host->base);
clk_disable:
clk_disable(host->clk);
+ clk_unprep:
+ clk_unprepare(host->clk);
clk_free:
clk_put(host->clk);
host_free:
@@ -1364,6 +1376,12 @@
if (mmc) {
struct mmci_host *host = mmc_priv(mmc);
+ /*
+ * Undo pm_runtime_put() in probe. We use the _sync
+ * version here so that we can access the primecell.
+ */
+ pm_runtime_get_sync(&dev->dev);
+
mmc_remove_host(mmc);
writel(0, host->base + MMCIMASK0);
@@ -1386,6 +1404,7 @@
iounmap(host->base);
clk_disable(host->clk);
+ clk_unprepare(host->clk);
clk_put(host->clk);
if (host->vcc)
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index a4c865a..80d8eb1 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -213,7 +213,8 @@
msmsdcc_writel(host, host->cmd_timeout, MMCIDATATIMER);
msmsdcc_writel(host, (unsigned int)host->curr.xfer_size,
MMCIDATALENGTH);
- msmsdcc_writel(host, host->cmd_pio_irqmask, MMCIMASK1);
+ msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) &
+ (~MCI_IRQ_PIO)) | host->cmd_pio_irqmask, MMCIMASK0);
msmsdcc_writel(host, host->cmd_datactrl, MMCIDATACTRL);
if (host->cmd_cmd) {
@@ -388,7 +389,7 @@
n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg,
host->dma.num_ents, host->dma.dir);
if (n == 0) {
- printk(KERN_ERR "%s: Unable to map in all sg elements\n",
+ pr_err("%s: Unable to map in all sg elements\n",
mmc_hostname(host->mmc));
host->dma.sg = NULL;
host->dma.num_ents = 0;
@@ -474,7 +475,7 @@
*c |= MCI_CSPM_MCIABORT;
if (host->curr.cmd != NULL) {
- printk(KERN_ERR "%s: Overlapping command requests\n",
+ pr_err("%s: Overlapping command requests\n",
mmc_hostname(host->mmc));
}
host->curr.cmd = cmd;
@@ -543,7 +544,9 @@
msmsdcc_writel(host, host->curr.xfer_size, MMCIDATALENGTH);
- msmsdcc_writel(host, pio_irqmask, MMCIMASK1);
+ msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) &
+ (~MCI_IRQ_PIO)) | pio_irqmask, MMCIMASK0);
+
msmsdcc_writel(host, datactrl, MMCIDATACTRL);
if (cmd) {
@@ -659,8 +662,13 @@
{
struct msmsdcc_host *host = dev_id;
uint32_t status;
+ u32 mci_mask0;
status = msmsdcc_readl(host, MMCISTATUS);
+ mci_mask0 = msmsdcc_readl(host, MMCIMASK0);
+
+ if (((mci_mask0 & status) & MCI_IRQ_PIO) == 0)
+ return IRQ_NONE;
do {
unsigned long flags;
@@ -719,10 +727,12 @@
} while (1);
if (status & MCI_RXACTIVE && host->curr.xfer_remain < MCI_FIFOSIZE)
- msmsdcc_writel(host, MCI_RXDATAAVLBLMASK, MMCIMASK1);
+ msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) |
+ MCI_RXDATAAVLBLMASK, MMCIMASK0);
if (!host->curr.xfer_remain)
- msmsdcc_writel(host, 0, MMCIMASK1);
+ msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) | 0,
+ MMCIMASK0);
return IRQ_HANDLED;
}
@@ -854,6 +864,8 @@
do {
status = msmsdcc_readl(host, MMCISTATUS);
status &= msmsdcc_readl(host, MMCIMASK0);
+ if ((status & (~MCI_IRQ_PIO)) == 0)
+ break;
msmsdcc_writel(host, status, MMCICLEAR);
if (status & MCI_SDIOINTR)
@@ -939,7 +951,7 @@
struct msm_mmc_gpio_data *curr;
int i, rc = 0;
- if (!host->plat->gpio_data && host->gpio_config_status == enable)
+ if (!host->plat->gpio_data || host->gpio_config_status == enable)
return;
curr = host->plat->gpio_data;
@@ -1052,10 +1064,19 @@
spin_unlock_irqrestore(&host->lock, flags);
}
+static void msmsdcc_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+ struct msmsdcc_host *host = mmc_priv(mmc);
+
+ if (host->plat->init_card)
+ host->plat->init_card(card);
+}
+
static const struct mmc_host_ops msmsdcc_ops = {
.request = msmsdcc_request,
.set_ios = msmsdcc_set_ios,
.enable_sdio_irq = msmsdcc_enable_sdio_irq,
+ .init_card = msmsdcc_init_card,
};
static void
@@ -1092,7 +1113,7 @@
{
struct msmsdcc_host *host = dev_id;
- printk(KERN_DEBUG "%s: %d\n", __func__, irq);
+ pr_debug("%s: %d\n", __func__, irq);
msmsdcc_check_status((unsigned long) host);
return IRQ_HANDLED;
}
@@ -1102,7 +1123,7 @@
{
struct msmsdcc_host *host = dev_id;
- printk(KERN_DEBUG "%s: card_present %d\n", mmc_hostname(host->mmc),
+ pr_debug("%s: card_present %d\n", mmc_hostname(host->mmc),
card_present);
msmsdcc_check_status((unsigned long) host);
}
@@ -1150,7 +1171,6 @@
struct msmsdcc_host *host;
struct mmc_host *mmc;
struct resource *cmd_irqres = NULL;
- struct resource *pio_irqres = NULL;
struct resource *stat_irqres = NULL;
struct resource *memres = NULL;
struct resource *dmares = NULL;
@@ -1175,12 +1195,10 @@
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
cmd_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"cmd_irq");
- pio_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- "pio_irq");
stat_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"status_irq");
- if (!cmd_irqres || !pio_irqres || !memres) {
+ if (!cmd_irqres || !memres) {
pr_err("%s: Invalid resource\n", __func__);
return -ENXIO;
}
@@ -1200,17 +1218,20 @@
host->plat = plat;
host->mmc = mmc;
host->curr.cmd = NULL;
+ init_timer(&host->busclk_timer);
+ host->busclk_timer.data = (unsigned long) host;
+ host->busclk_timer.function = msmsdcc_busclk_expired;
+
host->cmdpoll = 1;
host->base = ioremap(memres->start, PAGE_SIZE);
if (!host->base) {
ret = -ENOMEM;
- goto out;
+ goto host_free;
}
host->cmd_irqres = cmd_irqres;
- host->pio_irqres = pio_irqres;
host->memres = memres;
host->dmares = dmares;
spin_lock_init(&host->lock);
@@ -1221,13 +1242,19 @@
/*
* Setup DMA
*/
- msmsdcc_init_dma(host);
+ if (host->dmares) {
+ ret = msmsdcc_init_dma(host);
+ if (ret)
+ goto ioremap_free;
+ } else {
+ host->dma.channel = -1;
+ }
/* Get our clocks */
host->pclk = clk_get(&pdev->dev, "sdc_pclk");
if (IS_ERR(host->pclk)) {
ret = PTR_ERR(host->pclk);
- goto host_free;
+ goto dma_free;
}
host->clk = clk_get(&pdev->dev, "sdc_clk");
@@ -1236,17 +1263,17 @@
goto pclk_put;
}
+ ret = clk_set_rate(host->clk, msmsdcc_fmin);
+ if (ret) {
+ pr_err("%s: Clock rate set failed (%d)\n", __func__, ret);
+ goto clk_put;
+ }
+
/* Enable clocks */
ret = msmsdcc_enable_clocks(host);
if (ret)
goto clk_put;
- ret = clk_set_rate(host->clk, msmsdcc_fmin);
- if (ret) {
- pr_err("%s: Clock rate set failed (%d)\n", __func__, ret);
- goto clk_disable;
- }
-
host->pclk_rate = clk_get_rate(host->pclk);
host->clk_rate = clk_get_rate(host->clk);
@@ -1316,16 +1343,12 @@
host->eject = !host->oldstat;
}
- init_timer(&host->busclk_timer);
- host->busclk_timer.data = (unsigned long) host;
- host->busclk_timer.function = msmsdcc_busclk_expired;
-
ret = request_irq(cmd_irqres->start, msmsdcc_irq, IRQF_SHARED,
DRIVER_NAME " (cmd)", host);
if (ret)
goto stat_irq_free;
- ret = request_irq(pio_irqres->start, msmsdcc_pio_irq, IRQF_SHARED,
+ ret = request_irq(cmd_irqres->start, msmsdcc_pio_irq, IRQF_SHARED,
DRIVER_NAME " (pio)", host);
if (ret)
goto cmd_irq_free;
@@ -1368,6 +1391,13 @@
clk_put(host->clk);
pclk_put:
clk_put(host->pclk);
+dma_free:
+ if (host->dmares)
+ dma_free_coherent(NULL, sizeof(struct msmsdcc_nc_dmadata),
+ host->dma.nc, host->dma.nc_busaddr);
+ioremap_free:
+ tasklet_kill(&host->dma_tlet);
+ iounmap(host->base);
host_free:
mmc_free_host(mmc);
out:
diff --git a/drivers/mmc/host/msm_sdcc.h b/drivers/mmc/host/msm_sdcc.h
index 42d7bbc..402028d 100644
--- a/drivers/mmc/host/msm_sdcc.h
+++ b/drivers/mmc/host/msm_sdcc.h
@@ -140,6 +140,11 @@
MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK|MCI_PROGDONEMASK)
+#define MCI_IRQ_PIO \
+ (MCI_RXDATAAVLBLMASK | MCI_TXDATAAVLBLMASK | MCI_RXFIFOEMPTYMASK | \
+ MCI_TXFIFOEMPTYMASK | MCI_RXFIFOFULLMASK | MCI_TXFIFOFULLMASK | \
+ MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK | \
+ MCI_RXACTIVEMASK | MCI_TXACTIVEMASK)
/*
* The size of the FIFO in bytes.
*/
@@ -202,7 +207,6 @@
struct msmsdcc_host {
struct resource *cmd_irqres;
- struct resource *pio_irqres;
struct resource *memres;
struct resource *dmares;
void __iomem *base;
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index a5bf60e..211a495 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -117,7 +117,7 @@
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
- printk(KERN_DEBUG "%s: fallback to PIO for data "
+ pr_debug("%s: fallback to PIO for data "
"at 0x%p size %d\n",
mmc_hostname(host->mmc),
host->pio_ptr, host->pio_size);
@@ -471,7 +471,7 @@
if (mrq->data)
err_status = mvsd_finish_data(host, mrq->data, err_status);
if (err_status) {
- printk(KERN_ERR "%s: unhandled error status %#04x\n",
+ pr_err("%s: unhandled error status %#04x\n",
mmc_hostname(host->mmc), err_status);
cmd->error = -ENOMSG;
}
@@ -489,7 +489,7 @@
if (irq_handled)
return IRQ_HANDLED;
- printk(KERN_ERR "%s: unhandled interrupt status=0x%04x en=0x%04x "
+ pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
"pio=%d\n", mmc_hostname(host->mmc), intr_status,
host->intr_en, host->pio_size);
return IRQ_NONE;
@@ -505,9 +505,9 @@
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
- printk(KERN_ERR "%s: Timeout waiting for hardware interrupt.\n",
+ pr_err("%s: Timeout waiting for hardware interrupt.\n",
mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: hw_state=0x%04x, intr_status=0x%04x "
+ pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
"intr_en=0x%04x\n", mmc_hostname(host->mmc),
mvsd_read(MVSD_HW_STATE),
mvsd_read(MVSD_NOR_INTR_STATUS),
@@ -762,7 +762,7 @@
ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host);
if (ret) {
- printk(KERN_ERR "%s: cannot assign irq %d\n", DRIVER_NAME, irq);
+ pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq);
goto out;
} else
host->irq = irq;
@@ -802,7 +802,7 @@
if (ret)
goto out;
- printk(KERN_NOTICE "%s: %s driver initialized, ",
+ pr_notice("%s: %s driver initialized, ",
mmc_hostname(mmc), DRIVER_NAME);
if (host->gpio_card_detect)
printk("using GPIO %d for card detection\n",
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 14aa213..325ea61 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -40,6 +40,7 @@
#include <mach/mmc.h>
#include <mach/dma.h>
+#include <mach/hardware.h>
#define DRIVER_NAME "mxc-mmc"
@@ -842,7 +843,7 @@
int ret = 0, irq;
dma_cap_mask_t mask;
- printk(KERN_INFO "i.MX SDHC driver\n");
+ pr_info("i.MX SDHC driver\n");
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index d513d47..99b449d 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -37,6 +37,7 @@
#include <linux/mmc/sdio.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
#include <mach/mxs.h>
#include <mach/common.h>
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a6c3290..2dba999 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -33,7 +33,7 @@
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/fpga.h>
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 21e4a79..101cd31 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -450,15 +450,14 @@
* framework is fixed, we need a workaround like this
* (which is safe for MMC, but not in general).
*/
- if (regulator_is_enabled(host->vcc) > 0) {
- regulator_enable(host->vcc);
- regulator_disable(host->vcc);
- }
- if (host->vcc_aux) {
- if (regulator_is_enabled(reg) > 0) {
- regulator_enable(reg);
- regulator_disable(reg);
- }
+ if (regulator_is_enabled(host->vcc) > 0 ||
+ (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
+ int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+
+ mmc_slot(host).set_power(host->dev, host->slot_id,
+ 1, vdd);
+ mmc_slot(host).set_power(host->dev, host->slot_id,
+ 0, 0);
}
}
@@ -1264,14 +1263,14 @@
host->reqs_blocked = 0;
if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
if (host->protect_card) {
- printk(KERN_INFO "%s: cover is closed, "
+ pr_info("%s: cover is closed, "
"card is now accessible\n",
mmc_hostname(host->mmc));
host->protect_card = 0;
}
} else {
if (!host->protect_card) {
- printk(KERN_INFO "%s: cover is open, "
+ pr_info("%s: cover is open, "
"card is now inaccessible\n",
mmc_hostname(host->mmc));
host->protect_card = 1;
@@ -1422,7 +1421,7 @@
if (!next && data->host_cookie &&
data->host_cookie != host->next_data.cookie) {
- printk(KERN_WARNING "[%s] invalid cookie: data->host_cookie %d"
+ pr_warning("[%s] invalid cookie: data->host_cookie %d"
" host->next_data.cookie %d\n",
__func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
@@ -1943,6 +1942,10 @@
omap_hsmmc_context_save(host);
mmc->caps |= MMC_CAP_DISABLE;
+ if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) {
+ dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n");
+ mmc->caps2 |= MMC_CAP2_NO_MULTI_READ;
+ }
pm_runtime_enable(host->dev);
pm_runtime_get_sync(host->dev);
@@ -2015,7 +2018,7 @@
}
/* Request IRQ for MMC operations */
- ret = request_irq(host->irq, omap_hsmmc_irq, IRQF_DISABLED,
+ ret = request_irq(host->irq, omap_hsmmc_irq, 0,
mmc_hostname(mmc), host);
if (ret) {
dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
@@ -2043,8 +2046,7 @@
if ((mmc_slot(host).card_detect_irq)) {
ret = request_irq(mmc_slot(host).card_detect_irq,
omap_hsmmc_cd_handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
- | IRQF_DISABLED,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
mmc_hostname(mmc), host);
if (ret) {
dev_dbg(mmc_dev(host->mmc),
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 7257738..fc4356e 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -558,7 +558,7 @@
if (dcsr & DCSR_ENDINTR) {
writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
} else {
- printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
+ pr_err("%s: DMA error on channel %d (DCSR=%#x)\n",
mmc_hostname(host->mmc), dma, dcsr);
host->data->error = -EIO;
pxamci_data_done(host, 0);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index a04f87d..d2856b6 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -247,7 +247,7 @@
{
if (host->sdio_irqen) {
if (gpio_get_value(S3C2410_GPE(8)) == 0) {
- printk(KERN_DEBUG "%s: signalling irq\n", __func__);
+ pr_debug("%s: signalling irq\n", __func__);
mmc_signal_sdio_irq(host->mmc);
}
}
@@ -344,7 +344,7 @@
local_irq_save(flags);
- //printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer);
+ /* pr_debug("%s: transfer %d\n", __func__, transfer); */
host->irq_disabled = transfer;
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 4dc0028..ae57769 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -32,6 +32,15 @@
/* VENDOR SPEC register */
#define SDHCI_VENDOR_SPEC 0xC0
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
+#define SDHCI_MIX_CTRL 0x48
+
+/*
+ * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
+ * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
+ * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
+ * Define this macro DMA error INT for fsl eSDHC
+ */
+#define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000
/*
* The CMDTYPE of the CMD register (offset 0xE) should be set to
@@ -51,6 +60,7 @@
IMX35_ESDHC,
IMX51_ESDHC,
IMX53_ESDHC,
+ IMX6Q_USDHC,
};
struct pltfm_imx_data {
@@ -74,6 +84,9 @@
.name = "sdhci-esdhc-imx53",
.driver_data = IMX53_ESDHC,
}, {
+ .name = "sdhci-usdhc-imx6q",
+ .driver_data = IMX6Q_USDHC,
+ }, {
/* sentinel */
}
};
@@ -84,6 +97,7 @@
{ .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], },
{ .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], },
{ .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], },
+ { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
@@ -108,6 +122,11 @@
return data->devtype == IMX53_ESDHC;
}
+static inline int is_imx6q_usdhc(struct pltfm_imx_data *data)
+{
+ return data->devtype == IMX6Q_USDHC;
+}
+
static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
{
void __iomem *base = host->ioaddr + (reg & ~0x3);
@@ -135,6 +154,27 @@
val |= SDHCI_CARD_PRESENT;
}
+ if (unlikely(reg == SDHCI_CAPABILITIES)) {
+ /* In FSL esdhc IC module, only bit20 is used to indicate the
+ * ADMA2 capability of esdhc, but this bit is messed up on
+ * some SOCs (e.g. on MX25, MX35 this bit is set, but they
+ * don't actually support ADMA2). So set the BROKEN_ADMA
+ * uirk on MX25/35 platforms.
+ */
+
+ if (val & SDHCI_CAN_DO_ADMA1) {
+ val &= ~SDHCI_CAN_DO_ADMA1;
+ val |= SDHCI_CAN_DO_ADMA2;
+ }
+ }
+
+ if (unlikely(reg == SDHCI_INT_STATUS)) {
+ if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) {
+ val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+ val |= SDHCI_INT_ADMA_ERROR;
+ }
+ }
+
return val;
}
@@ -179,13 +219,28 @@
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
}
+ if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
+ if (val & SDHCI_INT_ADMA_ERROR) {
+ val &= ~SDHCI_INT_ADMA_ERROR;
+ val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+ }
+ }
+
writel(val, host->ioaddr + reg);
}
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
{
- if (unlikely(reg == SDHCI_HOST_VERSION))
- reg ^= 2;
+ if (unlikely(reg == SDHCI_HOST_VERSION)) {
+ u16 val = readw(host->ioaddr + (reg ^ 2));
+ /*
+ * uSDHC supports SDHCI v3.0, but it's encoded as value
+ * 0x3 in host controller version register, which violates
+ * SDHCI_SPEC_300 definition. Work it around here.
+ */
+ if ((val & SDHCI_SPEC_VER_MASK) == 3)
+ return --val;
+ }
return readw(host->ioaddr + reg);
}
@@ -216,8 +271,17 @@
if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
val |= SDHCI_CMD_ABORTCMD;
- writel(val << 16 | imx_data->scratchpad,
- host->ioaddr + SDHCI_TRANSFER_MODE);
+
+ if (is_imx6q_usdhc(imx_data)) {
+ u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL);
+ m = imx_data->scratchpad | (m & 0xffff0000);
+ writel(m, host->ioaddr + SDHCI_MIX_CTRL);
+ writel(val << 16,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ } else {
+ writel(val << 16 | imx_data->scratchpad,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ }
return;
case SDHCI_BLOCK_SIZE:
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
@@ -311,9 +375,10 @@
};
static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
- .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
+ | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+ | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
- /* ADMA has issues. Might be fixable */
.ops = &sdhci_esdhc_ops,
};
@@ -405,7 +470,8 @@
if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
- host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+ host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
+ | SDHCI_QUIRK_BROKEN_ADMA;
if (is_imx53_esdhc(imx_data))
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index fe604df6..59e9d00 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -1,7 +1,7 @@
/*
* Freescale eSDHC controller driver.
*
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007, 2010 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/mmc/host.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
@@ -22,11 +23,21 @@
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
u16 ret;
+ int base = reg & ~0x3;
+ int shift = (reg & 0x2) * 8;
if (unlikely(reg == SDHCI_HOST_VERSION))
- ret = in_be16(host->ioaddr + reg);
+ ret = in_be32(host->ioaddr + base) & 0xffff;
else
- ret = sdhci_be32bs_readw(host, reg);
+ ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
+ return ret;
+}
+
+static u8 esdhc_readb(struct sdhci_host *host, int reg)
+{
+ int base = reg & ~0x3;
+ int shift = (reg & 0x3) * 8;
+ u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
return ret;
}
@@ -74,7 +85,7 @@
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = sdhci_be32bs_readl,
.read_w = esdhc_readw,
- .read_b = sdhci_be32bs_readb,
+ .read_b = esdhc_readb,
.write_l = sdhci_be32bs_writel,
.write_w = esdhc_writew,
.write_b = esdhc_writeb,
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
index 735be13..9b0d794 100644
--- a/drivers/mmc/host/sdhci-of-hlwd.c
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -20,6 +20,7 @@
*/
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/mmc/host.h>
#include "sdhci-pltfm.h"
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 26c5286..d833d9c 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
@@ -21,6 +22,9 @@
#include <linux/mmc/host.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/sfi.h>
+#include <linux/pm_runtime.h>
#include "sdhci.h"
@@ -43,6 +47,7 @@
struct sdhci_pci_fixes {
unsigned int quirks;
+ bool allow_runtime_pm;
int (*probe) (struct sdhci_pci_chip *);
@@ -59,12 +64,16 @@
struct sdhci_host *host;
int pci_bar;
+ int rst_n_gpio;
+ int cd_gpio;
+ int cd_irq;
};
struct sdhci_pci_chip {
struct pci_dev *pdev;
unsigned int quirks;
+ bool allow_runtime_pm;
const struct sdhci_pci_fixes *fixes;
int num_slots; /* Slots on controller */
@@ -163,12 +172,129 @@
return 0;
}
+/* Medfield eMMC hardware reset GPIOs */
+static int mfd_emmc0_rst_gpio = -EINVAL;
+static int mfd_emmc1_rst_gpio = -EINVAL;
+
+static int mfd_emmc_gpio_parse(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb = (struct sfi_table_simple *)table;
+ struct sfi_gpio_table_entry *entry;
+ int i, num;
+
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+ entry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+ for (i = 0; i < num; i++, entry++) {
+ if (!strncmp(entry->pin_name, "emmc0_rst", SFI_NAME_LEN))
+ mfd_emmc0_rst_gpio = entry->pin_no;
+ else if (!strncmp(entry->pin_name, "emmc1_rst", SFI_NAME_LEN))
+ mfd_emmc1_rst_gpio = entry->pin_no;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+
+static irqreturn_t mfd_sd_cd(int irq, void *dev_id)
+{
+ struct sdhci_pci_slot *slot = dev_id;
+ struct sdhci_host *host = slot->host;
+
+ mmc_detect_change(host->mmc, msecs_to_jiffies(200));
+ return IRQ_HANDLED;
+}
+
+#define MFLD_SD_CD_PIN 69
+
+static int mfd_sd_probe_slot(struct sdhci_pci_slot *slot)
+{
+ int err, irq, gpio = MFLD_SD_CD_PIN;
+
+ slot->cd_gpio = -EINVAL;
+ slot->cd_irq = -EINVAL;
+
+ err = gpio_request(gpio, "sd_cd");
+ if (err < 0)
+ goto out;
+
+ err = gpio_direction_input(gpio);
+ if (err < 0)
+ goto out_free;
+
+ irq = gpio_to_irq(gpio);
+ if (irq < 0)
+ goto out_free;
+
+ err = request_irq(irq, mfd_sd_cd, IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING, "sd_cd", slot);
+ if (err)
+ goto out_free;
+
+ slot->cd_gpio = gpio;
+ slot->cd_irq = irq;
+ slot->host->quirks2 |= SDHCI_QUIRK2_OWN_CARD_DETECTION;
+
+ return 0;
+
+out_free:
+ gpio_free(gpio);
+out:
+ dev_warn(&slot->chip->pdev->dev, "failed to setup card detect wake up\n");
+ return 0;
+}
+
+static void mfd_sd_remove_slot(struct sdhci_pci_slot *slot, int dead)
+{
+ if (slot->cd_irq >= 0)
+ free_irq(slot->cd_irq, slot);
+ gpio_free(slot->cd_gpio);
+}
+
+#else
+
+#define mfd_sd_probe_slot NULL
+#define mfd_sd_remove_slot NULL
+
+#endif
+
static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+ const char *name = NULL;
+ int gpio = -EINVAL;
+
+ sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, mfd_emmc_gpio_parse);
+
+ switch (slot->chip->pdev->device) {
+ case PCI_DEVICE_ID_INTEL_MFD_EMMC0:
+ gpio = mfd_emmc0_rst_gpio;
+ name = "eMMC0_reset";
+ break;
+ case PCI_DEVICE_ID_INTEL_MFD_EMMC1:
+ gpio = mfd_emmc1_rst_gpio;
+ name = "eMMC1_reset";
+ break;
+ }
+
+ if (!gpio_request(gpio, name)) {
+ gpio_direction_output(gpio, 1);
+ slot->rst_n_gpio = gpio;
+ slot->host->mmc->caps |= MMC_CAP_HW_RESET;
+ }
+
+ slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE;
+
+ slot->host->mmc->caps2 = MMC_CAP2_BOOTPART_NOACC;
+
return 0;
}
+static void mfd_emmc_remove_slot(struct sdhci_pci_slot *slot, int dead)
+{
+ gpio_free(slot->rst_n_gpio);
+}
+
static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
.quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
.probe_slot = mrst_hc_probe_slot,
@@ -181,15 +307,21 @@
static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .allow_runtime_pm = true,
+ .probe_slot = mfd_sd_probe_slot,
+ .remove_slot = mfd_sd_remove_slot,
};
static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .allow_runtime_pm = true,
};
static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .allow_runtime_pm = true,
.probe_slot = mfd_emmc_probe_slot,
+ .remove_slot = mfd_emmc_remove_slot,
};
/* O2Micro extra registers */
@@ -832,9 +964,25 @@
return 0;
}
+static void sdhci_pci_hw_reset(struct sdhci_host *host)
+{
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ int rst_n_gpio = slot->rst_n_gpio;
+
+ if (!gpio_is_valid(rst_n_gpio))
+ return;
+ gpio_set_value_cansleep(rst_n_gpio, 0);
+ /* For eMMC, minimum is 1us but give it 10us for good measure */
+ udelay(10);
+ gpio_set_value_cansleep(rst_n_gpio, 1);
+ /* For eMMC, minimum is 200us but give it 300us for good measure */
+ usleep_range(300, 1000);
+}
+
static struct sdhci_ops sdhci_pci_ops = {
.enable_dma = sdhci_pci_enable_dma,
.platform_8bit_width = sdhci_pci_8bit_width,
+ .hw_reset = sdhci_pci_hw_reset,
};
/*****************************************************************************\
@@ -944,6 +1092,95 @@
#endif /* CONFIG_PM */
+#ifdef CONFIG_PM_RUNTIME
+
+static int sdhci_pci_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct sdhci_pci_chip *chip;
+ struct sdhci_pci_slot *slot;
+ pm_message_t state = { .event = PM_EVENT_SUSPEND };
+ int i, ret;
+
+ chip = pci_get_drvdata(pdev);
+ if (!chip)
+ return 0;
+
+ for (i = 0; i < chip->num_slots; i++) {
+ slot = chip->slots[i];
+ if (!slot)
+ continue;
+
+ ret = sdhci_runtime_suspend_host(slot->host);
+
+ if (ret) {
+ for (i--; i >= 0; i--)
+ sdhci_runtime_resume_host(chip->slots[i]->host);
+ return ret;
+ }
+ }
+
+ if (chip->fixes && chip->fixes->suspend) {
+ ret = chip->fixes->suspend(chip, state);
+ if (ret) {
+ for (i = chip->num_slots - 1; i >= 0; i--)
+ sdhci_runtime_resume_host(chip->slots[i]->host);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int sdhci_pci_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct sdhci_pci_chip *chip;
+ struct sdhci_pci_slot *slot;
+ int i, ret;
+
+ chip = pci_get_drvdata(pdev);
+ if (!chip)
+ return 0;
+
+ if (chip->fixes && chip->fixes->resume) {
+ ret = chip->fixes->resume(chip);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < chip->num_slots; i++) {
+ slot = chip->slots[i];
+ if (!slot)
+ continue;
+
+ ret = sdhci_runtime_resume_host(slot->host);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sdhci_pci_runtime_idle(struct device *dev)
+{
+ return 0;
+}
+
+#else
+
+#define sdhci_pci_runtime_suspend NULL
+#define sdhci_pci_runtime_resume NULL
+#define sdhci_pci_runtime_idle NULL
+
+#endif
+
+static const struct dev_pm_ops sdhci_pci_pm_ops = {
+ .runtime_suspend = sdhci_pci_runtime_suspend,
+ .runtime_resume = sdhci_pci_runtime_resume,
+ .runtime_idle = sdhci_pci_runtime_idle,
+};
+
/*****************************************************************************\
* *
* Device probing/removal *
@@ -988,6 +1225,7 @@
slot->chip = chip;
slot->host = host;
slot->pci_bar = bar;
+ slot->rst_n_gpio = -EINVAL;
host->hw_name = "PCI";
host->ops = &sdhci_pci_ops;
@@ -1058,6 +1296,21 @@
sdhci_free_host(slot->host);
}
+static void __devinit sdhci_pci_runtime_pm_allow(struct device *dev)
+{
+ pm_runtime_put_noidle(dev);
+ pm_runtime_allow(dev);
+ pm_runtime_set_autosuspend_delay(dev, 50);
+ pm_runtime_use_autosuspend(dev);
+ pm_suspend_ignore_children(dev, 1);
+}
+
+static void __devexit sdhci_pci_runtime_pm_forbid(struct device *dev)
+{
+ pm_runtime_forbid(dev);
+ pm_runtime_get_noresume(dev);
+}
+
static int __devinit sdhci_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1107,8 +1360,10 @@
chip->pdev = pdev;
chip->fixes = (const struct sdhci_pci_fixes *)ent->driver_data;
- if (chip->fixes)
+ if (chip->fixes) {
chip->quirks = chip->fixes->quirks;
+ chip->allow_runtime_pm = chip->fixes->allow_runtime_pm;
+ }
chip->num_slots = slots;
pci_set_drvdata(pdev, chip);
@@ -1133,6 +1388,9 @@
chip->slots[i] = slot;
}
+ if (chip->allow_runtime_pm)
+ sdhci_pci_runtime_pm_allow(&pdev->dev);
+
return 0;
free:
@@ -1152,6 +1410,9 @@
chip = pci_get_drvdata(pdev);
if (chip) {
+ if (chip->allow_runtime_pm)
+ sdhci_pci_runtime_pm_forbid(&pdev->dev);
+
for (i = 0; i < chip->num_slots; i++)
sdhci_pci_remove_slot(chip->slots[i]);
@@ -1169,6 +1430,9 @@
.remove = __devexit_p(sdhci_pci_remove),
.suspend = sdhci_pci_suspend,
.resume = sdhci_pci_resume,
+ .driver = {
+ .pm = &sdhci_pci_pm_ops
+ },
};
/*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 6414efe..a9e12ea 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -29,6 +29,7 @@
*/
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/of.h>
#ifdef CONFIG_PPC
#include <asm/machdep.h>
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index 38f5899..d4bf6d3 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/card.h>
@@ -59,7 +60,7 @@
* tune timing of read data/command when crc error happen
* no performance impact
*/
- if (pdata->clk_delay_sel == 1) {
+ if (pdata && pdata->clk_delay_sel == 1) {
tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT);
@@ -71,7 +72,7 @@
writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
}
- if (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING) {
+ if (pdata && (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING)) {
tmp = readw(host->ioaddr + SD_FIFO_PARAM);
tmp &= ~CLK_GATE_SETTING_BITS;
writew(tmp, host->ioaddr + SD_FIFO_PARAM);
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index fc7e4a5..cff4ad3 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -27,6 +27,7 @@
#include <linux/platform_data/pxa_sdhci.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index fe886d6..3d00e72 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -203,17 +203,23 @@
writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
}
- /* reconfigure the hardware for new clock rate */
+ /* reprogram default hardware configuration */
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
+ host->ioaddr + S3C64XX_SDHCI_CONTROL4);
- {
- struct mmc_ios ios;
+ ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+ ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
- ios.clock = clock;
-
- if (ourhost->pdata->cfg_card)
- (ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr,
- &ios, NULL);
- }
+ /* reconfigure the controller for new clock rate */
+ ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+ if (clock < 25 * 1000000)
+ ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
+ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
}
/**
@@ -561,8 +567,10 @@
err_req_regs:
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
- clk_disable(sc->clk_bus[ptr]);
- clk_put(sc->clk_bus[ptr]);
+ if (sc->clk_bus[ptr]) {
+ clk_disable(sc->clk_bus[ptr]);
+ clk_put(sc->clk_bus[ptr]);
+ }
}
err_no_busclks:
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 60a4c97..63cc8b6 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
@@ -177,8 +178,6 @@
sdhci->data->card_power_gpio);
goto err_pgpio_direction;
}
-
- gpio_set_value(sdhci->data->card_power_gpio, 1);
}
if (sdhci->data->card_int_gpio >= 0) {
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 18b0bd3..067a4cd 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -17,11 +17,16 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
+#include <linux/module.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
+
+#include <mach/gpio-tegra.h>
#include <mach/sdhci.h>
#include "sdhci-pltfm.h"
@@ -73,10 +78,8 @@
static unsigned int tegra_sdhci_get_ro(struct sdhci_host *sdhci)
{
- struct platform_device *pdev = to_platform_device(mmc_dev(sdhci->mmc));
- struct tegra_sdhci_platform_data *plat;
-
- plat = pdev->dev.platform_data;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(sdhci);
+ struct tegra_sdhci_platform_data *plat = pltfm_host->priv;
if (!gpio_is_valid(plat->wp_gpio))
return -1;
@@ -94,12 +97,10 @@
static int tegra_sdhci_8bit(struct sdhci_host *host, int bus_width)
{
- struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
- struct tegra_sdhci_platform_data *plat;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct tegra_sdhci_platform_data *plat = pltfm_host->priv;
u32 ctrl;
- plat = pdev->dev.platform_data;
-
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (plat->is_8bit && bus_width == MMC_BUS_WIDTH_8) {
ctrl &= ~SDHCI_CTRL_4BITBUS;
@@ -131,6 +132,36 @@
.ops = &tegra_sdhci_ops,
};
+static const struct of_device_id sdhci_tegra_dt_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-sdhci", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sdhci_dt_ids);
+
+static struct tegra_sdhci_platform_data * __devinit sdhci_tegra_dt_parse_pdata(
+ struct platform_device *pdev)
+{
+ struct tegra_sdhci_platform_data *plat;
+ struct device_node *np = pdev->dev.of_node;
+
+ if (!np)
+ return NULL;
+
+ plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat) {
+ dev_err(&pdev->dev, "Can't allocate platform data\n");
+ return NULL;
+ }
+
+ plat->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+ plat->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
+ plat->power_gpio = of_get_named_gpio(np, "power-gpios", 0);
+ if (of_find_property(np, "support-8bit", NULL))
+ plat->is_8bit = 1;
+
+ return plat;
+}
+
static int __devinit sdhci_tegra_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
@@ -147,12 +178,17 @@
plat = pdev->dev.platform_data;
+ if (plat == NULL)
+ plat = sdhci_tegra_dt_parse_pdata(pdev);
+
if (plat == NULL) {
dev_err(mmc_dev(host->mmc), "missing platform data\n");
rc = -ENXIO;
goto err_no_plat;
}
+ pltfm_host->priv = plat;
+
if (gpio_is_valid(plat->power_gpio)) {
rc = gpio_request(plat->power_gpio, "sdhci_power");
if (rc) {
@@ -247,13 +283,11 @@
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct tegra_sdhci_platform_data *plat;
+ struct tegra_sdhci_platform_data *plat = pltfm_host->priv;
int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
sdhci_remove_host(host, dead);
- plat = pdev->dev.platform_data;
-
if (gpio_is_valid(plat->wp_gpio)) {
tegra_gpio_disable(plat->wp_gpio);
gpio_free(plat->wp_gpio);
@@ -282,6 +316,7 @@
.driver = {
.name = "sdhci-tegra",
.owner = THIS_MODULE,
+ .of_match_table = sdhci_tegra_dt_match,
},
.probe = sdhci_tegra_probe,
.remove = __devexit_p(sdhci_tegra_remove),
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0e02cc1..6d8eea3 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -16,10 +16,12 @@
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
#include <linux/leds.h>
@@ -41,6 +43,7 @@
#define MAX_TUNING_LOOP 40
static unsigned int debug_quirks = 0;
+static unsigned int debug_quirks2;
static void sdhci_finish_data(struct sdhci_host *);
@@ -49,53 +52,67 @@
static int sdhci_execute_tuning(struct mmc_host *mmc);
static void sdhci_tuning_timer(unsigned long data);
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_runtime_pm_get(struct sdhci_host *host);
+static int sdhci_runtime_pm_put(struct sdhci_host *host);
+#else
+static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
+{
+ return 0;
+}
+static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
+{
+ return 0;
+}
+#endif
+
static void sdhci_dumpregs(struct sdhci_host *host)
{
- printk(KERN_DEBUG DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
+ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
mmc_hostname(host->mmc));
- printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
sdhci_readl(host, SDHCI_DMA_ADDRESS),
sdhci_readw(host, SDHCI_HOST_VERSION));
- printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
sdhci_readw(host, SDHCI_BLOCK_SIZE),
sdhci_readw(host, SDHCI_BLOCK_COUNT));
- printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
sdhci_readl(host, SDHCI_ARGUMENT),
sdhci_readw(host, SDHCI_TRANSFER_MODE));
- printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
sdhci_readl(host, SDHCI_PRESENT_STATE),
sdhci_readb(host, SDHCI_HOST_CONTROL));
- printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
sdhci_readb(host, SDHCI_POWER_CONTROL),
sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
- printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
sdhci_readw(host, SDHCI_CLOCK_CONTROL));
- printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
sdhci_readl(host, SDHCI_INT_STATUS));
- printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
sdhci_readl(host, SDHCI_INT_ENABLE),
sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
- printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
sdhci_readw(host, SDHCI_ACMD12_ERR),
sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
- printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
sdhci_readl(host, SDHCI_CAPABILITIES),
sdhci_readl(host, SDHCI_CAPABILITIES_1));
- printk(KERN_DEBUG DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
sdhci_readw(host, SDHCI_COMMAND),
sdhci_readl(host, SDHCI_MAX_CURRENT));
- printk(KERN_DEBUG DRIVER_NAME ": Host ctl2: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
sdhci_readw(host, SDHCI_HOST_CONTROL2));
if (host->flags & SDHCI_USE_ADMA)
- printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
readl(host->ioaddr + SDHCI_ADMA_ERROR),
readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
- printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
+ pr_debug(DRIVER_NAME ": ===========================================\n");
}
/*****************************************************************************\
@@ -132,6 +149,9 @@
if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
return;
+ if (host->quirks2 & SDHCI_QUIRK2_OWN_CARD_DETECTION)
+ return;
+
present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT;
irqs = present ? SDHCI_INT_CARD_REMOVE : SDHCI_INT_CARD_INSERT;
@@ -180,7 +200,7 @@
/* hw clears the bit when it's done */
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
+ pr_err("%s: Reset 0x%x never completed.\n",
mmc_hostname(host->mmc), (int)mask);
sdhci_dumpregs(host);
return;
@@ -251,11 +271,14 @@
spin_lock_irqsave(&host->lock, flags);
+ if (host->runtime_suspended)
+ goto out;
+
if (brightness == LED_OFF)
sdhci_deactivate_led(host);
else
sdhci_activate_led(host);
-
+out:
spin_unlock_irqrestore(&host->lock, flags);
}
#endif
@@ -654,7 +677,7 @@
}
if (count >= 0xF) {
- printk(KERN_WARNING "%s: Too large timeout requested for CMD%d!\n",
+ pr_warning("%s: Too large timeout requested for CMD%d!\n",
mmc_hostname(host->mmc), cmd->opcode);
count = 0xE;
}
@@ -949,7 +972,7 @@
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Controller never released "
+ pr_err("%s: Controller never released "
"inhibit bit(s).\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = -EIO;
@@ -971,7 +994,7 @@
sdhci_set_transfer_mode(host, cmd);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
- printk(KERN_ERR "%s: Unsupported response type!\n",
+ pr_err("%s: Unsupported response type!\n",
mmc_hostname(host->mmc));
cmd->error = -EINVAL;
tasklet_schedule(&host->finish_tasklet);
@@ -1121,7 +1144,7 @@
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Internal clock never "
+ pr_err("%s: Internal clock never "
"stabilised.\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
@@ -1209,6 +1232,8 @@
host = mmc_priv(mmc);
+ sdhci_runtime_pm_get(host);
+
spin_lock_irqsave(&host->lock, flags);
WARN_ON(host->mrq != NULL);
@@ -1269,14 +1294,11 @@
spin_unlock_irqrestore(&host->lock, flags);
}
-static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
{
- struct sdhci_host *host;
unsigned long flags;
u8 ctrl;
- host = mmc_priv(mmc);
-
spin_lock_irqsave(&host->lock, flags);
if (host->flags & SDHCI_DEVICE_DEAD)
@@ -1426,7 +1448,16 @@
spin_unlock_irqrestore(&host->lock, flags);
}
-static int check_ro(struct sdhci_host *host)
+static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ sdhci_runtime_pm_get(host);
+ sdhci_do_set_ios(host, ios);
+ sdhci_runtime_pm_put(host);
+}
+
+static int sdhci_check_ro(struct sdhci_host *host)
{
unsigned long flags;
int is_readonly;
@@ -1450,19 +1481,16 @@
#define SAMPLE_COUNT 5
-static int sdhci_get_ro(struct mmc_host *mmc)
+static int sdhci_do_get_ro(struct sdhci_host *host)
{
- struct sdhci_host *host;
int i, ro_count;
- host = mmc_priv(mmc);
-
if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
- return check_ro(host);
+ return sdhci_check_ro(host);
ro_count = 0;
for (i = 0; i < SAMPLE_COUNT; i++) {
- if (check_ro(host)) {
+ if (sdhci_check_ro(host)) {
if (++ro_count > SAMPLE_COUNT / 2)
return 1;
}
@@ -1471,38 +1499,64 @@
return 0;
}
-static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+static void sdhci_hw_reset(struct mmc_host *mmc)
{
- struct sdhci_host *host;
- unsigned long flags;
+ struct sdhci_host *host = mmc_priv(mmc);
- host = mmc_priv(mmc);
+ if (host->ops && host->ops->hw_reset)
+ host->ops->hw_reset(host);
+}
- spin_lock_irqsave(&host->lock, flags);
+static int sdhci_get_ro(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int ret;
+ sdhci_runtime_pm_get(host);
+ ret = sdhci_do_get_ro(host);
+ sdhci_runtime_pm_put(host);
+ return ret;
+}
+
+static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
+{
if (host->flags & SDHCI_DEVICE_DEAD)
goto out;
if (enable)
+ host->flags |= SDHCI_SDIO_IRQ_ENABLED;
+ else
+ host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
+
+ /* SDIO IRQ will be enabled as appropriate in runtime resume */
+ if (host->runtime_suspended)
+ goto out;
+
+ if (enable)
sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
else
sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
out:
mmiowb();
+}
+static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ sdhci_enable_sdio_irq_nolock(host, enable);
spin_unlock_irqrestore(&host->lock, flags);
}
-static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
- struct mmc_ios *ios)
+static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+ struct mmc_ios *ios)
{
- struct sdhci_host *host;
u8 pwr;
u16 clk, ctrl;
u32 present_state;
- host = mmc_priv(mmc);
-
/*
* Signal Voltage Switching is only applicable for Host Controllers
* v3.00 and above.
@@ -1528,7 +1582,7 @@
if (!(ctrl & SDHCI_CTRL_VDD_180))
return 0;
else {
- printk(KERN_INFO DRIVER_NAME ": Switching to 3.3V "
+ pr_info(DRIVER_NAME ": Switching to 3.3V "
"signalling voltage failed\n");
return -EIO;
}
@@ -1587,7 +1641,7 @@
pwr |= SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
- printk(KERN_INFO DRIVER_NAME ": Switching to 1.8V signalling "
+ pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
"voltage failed, retrying with S18R set to 0\n");
return -EAGAIN;
} else
@@ -1595,6 +1649,20 @@
return 0;
}
+static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int err;
+
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+ sdhci_runtime_pm_get(host);
+ err = sdhci_do_start_signal_voltage_switch(host, ios);
+ sdhci_runtime_pm_put(host);
+ return err;
+}
+
static int sdhci_execute_tuning(struct mmc_host *mmc)
{
struct sdhci_host *host;
@@ -1606,6 +1674,7 @@
host = mmc_priv(mmc);
+ sdhci_runtime_pm_get(host);
disable_irq(host->irq);
spin_lock(&host->lock);
@@ -1623,6 +1692,7 @@
else {
spin_unlock(&host->lock);
enable_irq(host->irq);
+ sdhci_runtime_pm_put(host);
return 0;
}
@@ -1648,7 +1718,7 @@
timeout = 150;
do {
struct mmc_command cmd = {0};
- struct mmc_request mrq = {0};
+ struct mmc_request mrq = {NULL};
if (!tuning_loop_counter && !timeout)
break;
@@ -1694,7 +1764,7 @@
spin_lock(&host->lock);
if (!host->tuning_done) {
- printk(KERN_INFO DRIVER_NAME ": Timeout waiting for "
+ pr_info(DRIVER_NAME ": Timeout waiting for "
"Buffer Read Ready interrupt during tuning "
"procedure, falling back to fixed sampling "
"clock\n");
@@ -1724,7 +1794,7 @@
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
} else {
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
- printk(KERN_INFO DRIVER_NAME ": Tuning procedure"
+ pr_info(DRIVER_NAME ": Tuning procedure"
" failed, falling back to fixed sampling"
" clock\n");
err = -EIO;
@@ -1766,18 +1836,16 @@
sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
spin_unlock(&host->lock);
enable_irq(host->irq);
+ sdhci_runtime_pm_put(host);
return err;
}
-static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable)
+static void sdhci_do_enable_preset_value(struct sdhci_host *host, bool enable)
{
- struct sdhci_host *host;
u16 ctrl;
unsigned long flags;
- host = mmc_priv(mmc);
-
/* Host Controller v3.00 defines preset value registers */
if (host->version < SDHCI_SPEC_300)
return;
@@ -1793,18 +1861,30 @@
if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ host->flags |= SDHCI_PV_ENABLED;
} else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ host->flags &= ~SDHCI_PV_ENABLED;
}
spin_unlock_irqrestore(&host->lock, flags);
}
+static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ sdhci_runtime_pm_get(host);
+ sdhci_do_enable_preset_value(host, enable);
+ sdhci_runtime_pm_put(host);
+}
+
static const struct mmc_host_ops sdhci_ops = {
.request = sdhci_request,
.set_ios = sdhci_set_ios,
.get_ro = sdhci_get_ro,
+ .hw_reset = sdhci_hw_reset,
.enable_sdio_irq = sdhci_enable_sdio_irq,
.start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
.execute_tuning = sdhci_execute_tuning,
@@ -1826,19 +1906,19 @@
spin_lock_irqsave(&host->lock, flags);
- if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
- if (host->mrq) {
- printk(KERN_ERR "%s: Card removed during transfer!\n",
- mmc_hostname(host->mmc));
- printk(KERN_ERR "%s: Resetting controller.\n",
- mmc_hostname(host->mmc));
+ /* Check host->mrq first in case we are runtime suspended */
+ if (host->mrq &&
+ !(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+ pr_err("%s: Card removed during transfer!\n",
+ mmc_hostname(host->mmc));
+ pr_err("%s: Resetting controller.\n",
+ mmc_hostname(host->mmc));
- sdhci_reset(host, SDHCI_RESET_CMD);
- sdhci_reset(host, SDHCI_RESET_DATA);
+ sdhci_reset(host, SDHCI_RESET_CMD);
+ sdhci_reset(host, SDHCI_RESET_DATA);
- host->mrq->cmd->error = -ENOMEDIUM;
- tasklet_schedule(&host->finish_tasklet);
- }
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
}
spin_unlock_irqrestore(&host->lock, flags);
@@ -1854,14 +1934,16 @@
host = (struct sdhci_host*)param;
+ spin_lock_irqsave(&host->lock, flags);
+
/*
* If this tasklet gets rescheduled while running, it will
* be run again afterwards but without any active request.
*/
- if (!host->mrq)
+ if (!host->mrq) {
+ spin_unlock_irqrestore(&host->lock, flags);
return;
-
- spin_lock_irqsave(&host->lock, flags);
+ }
del_timer(&host->timer);
@@ -1905,6 +1987,7 @@
spin_unlock_irqrestore(&host->lock, flags);
mmc_request_done(host->mmc, mrq);
+ sdhci_runtime_pm_put(host);
}
static void sdhci_timeout_timer(unsigned long data)
@@ -1917,7 +2000,7 @@
spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
- printk(KERN_ERR "%s: Timeout waiting for hardware "
+ pr_err("%s: Timeout waiting for hardware "
"interrupt.\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
@@ -1963,7 +2046,7 @@
BUG_ON(intmask == 0);
if (!host->cmd) {
- printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
+ pr_err("%s: Got command interrupt 0x%08x even "
"though no command operation was in progress.\n",
mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
@@ -2063,7 +2146,7 @@
}
}
- printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
+ pr_err("%s: Got data interrupt 0x%08x even "
"though no data operation was in progress.\n",
mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
@@ -2080,7 +2163,7 @@
!= MMC_BUS_TEST_R)
host->data->error = -EILSEQ;
else if (intmask & SDHCI_INT_ADMA_ERROR) {
- printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
+ pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
sdhci_show_adma_error(host);
host->data->error = -EIO;
}
@@ -2136,12 +2219,19 @@
static irqreturn_t sdhci_irq(int irq, void *dev_id)
{
irqreturn_t result;
- struct sdhci_host* host = dev_id;
+ struct sdhci_host *host = dev_id;
u32 intmask;
int cardint = 0;
spin_lock(&host->lock);
+ if (host->runtime_suspended) {
+ spin_unlock(&host->lock);
+ pr_warning("%s: got irq while runtime suspended\n",
+ mmc_hostname(host->mmc));
+ return IRQ_HANDLED;
+ }
+
intmask = sdhci_readl(host, SDHCI_INT_STATUS);
if (!intmask || intmask == 0xffffffff) {
@@ -2194,7 +2284,7 @@
intmask &= ~SDHCI_INT_ERROR;
if (intmask & SDHCI_INT_BUS_POWER) {
- printk(KERN_ERR "%s: Card is consuming too much power!\n",
+ pr_err("%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
}
@@ -2207,7 +2297,7 @@
intmask &= ~SDHCI_INT_CARD_INT;
if (intmask) {
- printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
+ pr_err("%s: Unexpected interrupt 0x%08x.\n",
mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
@@ -2275,7 +2365,6 @@
return ret;
}
-
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma)
host->ops->enable_dma(host);
@@ -2314,6 +2403,90 @@
#endif /* CONFIG_PM */
+#ifdef CONFIG_PM_RUNTIME
+
+static int sdhci_runtime_pm_get(struct sdhci_host *host)
+{
+ return pm_runtime_get_sync(host->mmc->parent);
+}
+
+static int sdhci_runtime_pm_put(struct sdhci_host *host)
+{
+ pm_runtime_mark_last_busy(host->mmc->parent);
+ return pm_runtime_put_autosuspend(host->mmc->parent);
+}
+
+int sdhci_runtime_suspend_host(struct sdhci_host *host)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable tuning since we are suspending */
+ if (host->version >= SDHCI_SPEC_300 &&
+ host->tuning_mode == SDHCI_TUNING_MODE_1) {
+ del_timer_sync(&host->tuning_timer);
+ host->flags &= ~SDHCI_NEEDS_RETUNING;
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+ sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ synchronize_irq(host->irq);
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = true;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host);
+
+int sdhci_runtime_resume_host(struct sdhci_host *host)
+{
+ unsigned long flags;
+ int ret = 0, host_flags = host->flags;
+
+ if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+
+ sdhci_init(host, 0);
+
+ /* Force clock and power re-program */
+ host->pwr = 0;
+ host->clock = 0;
+ sdhci_do_set_ios(host, &host->mmc->ios);
+
+ sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
+ if (host_flags & SDHCI_PV_ENABLED)
+ sdhci_do_enable_preset_value(host, true);
+
+ /* Set the re-tuning expiration flag */
+ if ((host->version >= SDHCI_SPEC_300) && host->tuning_count &&
+ (host->tuning_mode == SDHCI_TUNING_MODE_1))
+ host->flags |= SDHCI_NEEDS_RETUNING;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->runtime_suspended = false;
+
+ /* Enable SDIO IRQ */
+ if ((host->flags & SDHCI_SDIO_IRQ_ENABLED))
+ sdhci_enable_sdio_irq_nolock(host, true);
+
+ /* Enable Card Detection */
+ sdhci_enable_card_detection(host);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
+
+#endif
+
/*****************************************************************************\
* *
* Device allocation/registration *
@@ -2356,6 +2529,8 @@
if (debug_quirks)
host->quirks = debug_quirks;
+ if (debug_quirks2)
+ host->quirks2 = debug_quirks2;
sdhci_reset(host, SDHCI_RESET_ALL);
@@ -2363,7 +2538,7 @@
host->version = (host->version & SDHCI_SPEC_VER_MASK)
>> SDHCI_SPEC_VER_SHIFT;
if (host->version > SDHCI_SPEC_300) {
- printk(KERN_ERR "%s: Unknown controller version (%d). "
+ pr_err("%s: Unknown controller version (%d). "
"You may experience problems.\n", mmc_hostname(mmc),
host->version);
}
@@ -2400,7 +2575,7 @@
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
- printk(KERN_WARNING "%s: No suitable DMA "
+ pr_warning("%s: No suitable DMA "
"available. Falling back to PIO.\n",
mmc_hostname(mmc));
host->flags &=
@@ -2420,7 +2595,7 @@
if (!host->adma_desc || !host->align_buffer) {
kfree(host->adma_desc);
kfree(host->align_buffer);
- printk(KERN_WARNING "%s: Unable to allocate ADMA "
+ pr_warning("%s: Unable to allocate ADMA "
"buffers. Falling back to standard DMA.\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
@@ -2448,8 +2623,7 @@
if (host->max_clk == 0 || host->quirks &
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
- printk(KERN_ERR
- "%s: Hardware doesn't specify base clock "
+ pr_err("%s: Hardware doesn't specify base clock "
"frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
@@ -2495,8 +2669,7 @@
host->timeout_clk = host->ops->get_timeout_clock(host);
} else if (!(host->quirks &
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- printk(KERN_ERR
- "%s: Hardware doesn't specify timeout clock "
+ pr_err("%s: Hardware doesn't specify timeout clock "
"frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
@@ -2566,6 +2739,15 @@
if (caps[1] & SDHCI_DRIVER_TYPE_D)
mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
+ /*
+ * If Power Off Notify capability is enabled by the host,
+ * set notify to short power off notify timeout value.
+ */
+ if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY)
+ mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
+ else
+ mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE;
+
/* Initial value for re-tuning timer count */
host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
SDHCI_RETUNING_TIMER_COUNT_SHIFT;
@@ -2655,7 +2837,7 @@
mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
if (mmc->ocr_avail == 0) {
- printk(KERN_ERR "%s: Hardware doesn't report any "
+ pr_err("%s: Hardware doesn't report any "
"support voltages.\n", mmc_hostname(mmc));
return -ENODEV;
}
@@ -2703,7 +2885,7 @@
mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
SDHCI_MAX_BLOCK_SHIFT;
if (mmc->max_blk_size >= 3) {
- printk(KERN_WARNING "%s: Invalid maximum block size, "
+ pr_warning("%s: Invalid maximum block size, "
"assuming 512 bytes\n", mmc_hostname(mmc));
mmc->max_blk_size = 0;
}
@@ -2742,7 +2924,7 @@
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
if (IS_ERR(host->vmmc)) {
- printk(KERN_INFO "%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
host->vmmc = NULL;
} else {
regulator_enable(host->vmmc);
@@ -2771,7 +2953,7 @@
mmc_add_host(mmc);
- printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
+ pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
(host->flags & SDHCI_USE_ADMA) ? "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
@@ -2804,7 +2986,7 @@
host->flags |= SDHCI_DEVICE_DEAD;
if (host->mrq) {
- printk(KERN_ERR "%s: Controller removed during "
+ pr_err("%s: Controller removed during "
" transfer!\n", mmc_hostname(host->mmc));
host->mrq->cmd->error = -ENOMEDIUM;
@@ -2863,9 +3045,9 @@
static int __init sdhci_drv_init(void)
{
- printk(KERN_INFO DRIVER_NAME
+ pr_info(DRIVER_NAME
": Secure Digital Host Controller Interface driver\n");
- printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+ pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
return 0;
}
@@ -2878,9 +3060,11 @@
module_exit(sdhci_drv_exit);
module_param(debug_quirks, uint, 0444);
+module_param(debug_quirks2, uint, 0444);
MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
MODULE_LICENSE("GPL");
MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
+MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks.");
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 745c42f..0a5b654 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -273,7 +273,7 @@
void (*platform_reset_enter)(struct sdhci_host *host, u8 mask);
void (*platform_reset_exit)(struct sdhci_host *host, u8 mask);
int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
-
+ void (*hw_reset)(struct sdhci_host *host);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
@@ -379,4 +379,9 @@
extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
#endif
+#ifdef CONFIG_PM_RUNTIME
+extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
+extern int sdhci_runtime_resume_host(struct sdhci_host *host);
+#endif
+
#endif /* __SDHCI_HW_H */
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index 496b7ef..7009f17 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -26,6 +26,7 @@
*/
#include <linux/delay.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/scatterlist.h>
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 557886b..369366c 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spinlock.h>
+#include <linux/module.h>
#define DRIVER_NAME "sh_mmcif"
#define DRIVER_VERSION "2010-04-28"
@@ -165,6 +166,8 @@
struct mmc_host *mmc;
struct mmc_data *data;
struct platform_device *pd;
+ struct sh_dmae_slave dma_slave_tx;
+ struct sh_dmae_slave dma_slave_rx;
struct clk *hclk;
unsigned int clk;
int bus_width;
@@ -323,25 +326,35 @@
static void sh_mmcif_request_dma(struct sh_mmcif_host *host,
struct sh_mmcif_plat_data *pdata)
{
+ struct sh_dmae_slave *tx, *rx;
host->dma_active = false;
/* We can only either use DMA for both Tx and Rx or not use it at all */
if (pdata->dma) {
+ dev_warn(&host->pd->dev,
+ "Update your platform to use embedded DMA slave IDs\n");
+ tx = &pdata->dma->chan_priv_tx;
+ rx = &pdata->dma->chan_priv_rx;
+ } else {
+ tx = &host->dma_slave_tx;
+ tx->slave_id = pdata->slave_id_tx;
+ rx = &host->dma_slave_rx;
+ rx->slave_id = pdata->slave_id_rx;
+ }
+ if (tx->slave_id > 0 && rx->slave_id > 0) {
dma_cap_mask_t mask;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->chan_tx = dma_request_channel(mask, sh_mmcif_filter,
- &pdata->dma->chan_priv_tx);
+ host->chan_tx = dma_request_channel(mask, sh_mmcif_filter, tx);
dev_dbg(&host->pd->dev, "%s: TX: got channel %p\n", __func__,
host->chan_tx);
if (!host->chan_tx)
return;
- host->chan_rx = dma_request_channel(mask, sh_mmcif_filter,
- &pdata->dma->chan_priv_rx);
+ host->chan_rx = dma_request_channel(mask, sh_mmcif_filter, rx);
dev_dbg(&host->pd->dev, "%s: RX: got channel %p\n", __func__,
host->chan_rx);
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 0c4a672..41ae646 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
@@ -96,7 +97,8 @@
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
struct tmio_mmc_host *host;
char clk_name[8];
- int i, irq, ret;
+ int irq, ret, i = 0;
+ bool multiplexed_isr = true;
priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
if (priv == NULL) {
@@ -153,27 +155,60 @@
if (ret < 0)
goto eprobe;
- for (i = 0; i < 3; i++) {
- irq = platform_get_irq(pdev, i);
- if (irq < 0) {
- if (i) {
- continue;
- } else {
- ret = irq;
- goto eirq;
- }
- }
- ret = request_irq(irq, tmio_mmc_irq, 0,
+ /*
+ * Allow one or more specific (named) ISRs or
+ * one or more multiplexed (un-named) ISRs.
+ */
+
+ irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
+ if (irq >= 0) {
+ multiplexed_isr = false;
+ ret = request_irq(irq, tmio_mmc_card_detect_irq, 0,
dev_name(&pdev->dev), host);
- if (ret) {
- while (i--) {
- irq = platform_get_irq(pdev, i);
- if (irq >= 0)
- free_irq(irq, host);
- }
- goto eirq;
- }
+ if (ret)
+ goto eirq_card_detect;
}
+
+ irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
+ if (irq >= 0) {
+ multiplexed_isr = false;
+ ret = request_irq(irq, tmio_mmc_sdio_irq, 0,
+ dev_name(&pdev->dev), host);
+ if (ret)
+ goto eirq_sdio;
+ }
+
+ irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
+ if (irq >= 0) {
+ multiplexed_isr = false;
+ ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
+ dev_name(&pdev->dev), host);
+ if (ret)
+ goto eirq_sdcard;
+ } else if (!multiplexed_isr) {
+ dev_err(&pdev->dev,
+ "Principal SD-card IRQ is missing among named interrupts\n");
+ ret = irq;
+ goto eirq_sdcard;
+ }
+
+ if (multiplexed_isr) {
+ while (1) {
+ irq = platform_get_irq(pdev, i);
+ if (irq < 0)
+ break;
+ i++;
+ ret = request_irq(irq, tmio_mmc_irq, 0,
+ dev_name(&pdev->dev), host);
+ if (ret)
+ goto eirq_multiplexed;
+ }
+
+ /* There must be at least one IRQ source */
+ if (!i)
+ goto eirq_multiplexed;
+ }
+
dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
mmc_hostname(host->mmc), (unsigned long)
(platform_get_resource(pdev,IORESOURCE_MEM, 0)->start),
@@ -181,7 +216,20 @@
return ret;
-eirq:
+eirq_multiplexed:
+ while (i--) {
+ irq = platform_get_irq(pdev, i);
+ free_irq(irq, host);
+ }
+eirq_sdcard:
+ irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
+ if (irq >= 0)
+ free_irq(irq, host);
+eirq_sdio:
+ irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
+ if (irq >= 0)
+ free_irq(irq, host);
+eirq_card_detect:
tmio_mmc_host_remove(host);
eprobe:
clk_disable(priv->clk);
@@ -197,16 +245,17 @@
struct tmio_mmc_host *host = mmc_priv(mmc);
struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
- int i, irq;
+ int i = 0, irq;
p->pdata = NULL;
tmio_mmc_host_remove(host);
- for (i = 0; i < 3; i++) {
- irq = platform_get_irq(pdev, i);
- if (irq >= 0)
- free_irq(irq, host);
+ while (1) {
+ irq = platform_get_irq(pdev, i++);
+ if (irq < 0)
+ break;
+ free_irq(irq, host);
}
clk_disable(priv->clk);
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 457c26e..f70d046 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -16,6 +16,7 @@
#include <linux/mmc/host.h>
#include <linux/highmem.h>
#include <linux/scatterlist.h>
+#include <linux/module.h>
#include <asm/io.h>
#define DRIVER_NAME "tifm_sd"
@@ -631,7 +632,7 @@
}
if (host->req) {
- printk(KERN_ERR "%s : unfinished request detected\n",
+ pr_err("%s : unfinished request detected\n",
dev_name(&sock->dev));
mrq->cmd->error = -ETIMEDOUT;
goto err_out;
@@ -671,7 +672,7 @@
r_data->flags & MMC_DATA_WRITE
? PCI_DMA_TODEVICE
: PCI_DMA_FROMDEVICE)) {
- printk(KERN_ERR "%s : scatterlist map failed\n",
+ pr_err("%s : scatterlist map failed\n",
dev_name(&sock->dev));
mrq->cmd->error = -ENOMEM;
goto err_out;
@@ -683,7 +684,7 @@
? PCI_DMA_TODEVICE
: PCI_DMA_FROMDEVICE);
if (host->sg_len < 1) {
- printk(KERN_ERR "%s : scatterlist map failed\n",
+ pr_err("%s : scatterlist map failed\n",
dev_name(&sock->dev));
tifm_unmap_sg(sock, &host->bounce_buf, 1,
r_data->flags & MMC_DATA_WRITE
@@ -747,7 +748,7 @@
host->req = NULL;
if (!mrq) {
- printk(KERN_ERR " %s : no request to complete?\n",
+ pr_err(" %s : no request to complete?\n",
dev_name(&sock->dev));
spin_unlock_irqrestore(&sock->lock, flags);
return;
@@ -786,8 +787,7 @@
{
struct tifm_sd *host = (struct tifm_sd*)data;
- printk(KERN_ERR
- "%s : card failed to respond for a long period of time "
+ pr_err("%s : card failed to respond for a long period of time "
"(%x, %x)\n",
dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
@@ -905,7 +905,7 @@
}
if (rc) {
- printk(KERN_ERR "%s : controller failed to reset\n",
+ pr_err("%s : controller failed to reset\n",
dev_name(&sock->dev));
return -ENODEV;
}
@@ -931,8 +931,7 @@
}
if (rc) {
- printk(KERN_ERR
- "%s : card not ready - probe failed on initialization\n",
+ pr_err("%s : card not ready - probe failed on initialization\n",
dev_name(&sock->dev));
return -ENODEV;
}
@@ -953,7 +952,7 @@
if (!(TIFM_SOCK_STATE_OCCUPIED
& readl(sock->addr + SOCK_PRESENT_STATE))) {
- printk(KERN_WARNING "%s : card gone, unexpectedly\n",
+ pr_warning("%s : card gone, unexpectedly\n",
dev_name(&sock->dev));
return rc;
}
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 44a9668..a4ea102 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -88,8 +88,8 @@
if (ret)
goto cell_disable;
- ret = request_irq(irq, tmio_mmc_irq, IRQF_DISABLED |
- IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), host);
+ ret = request_irq(irq, tmio_mmc_irq, IRQF_TRIGGER_FALLING,
+ dev_name(&pdev->dev), host);
if (ret)
goto host_remove;
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index eeaf643..3020f98 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -79,6 +79,10 @@
struct delayed_work delayed_reset_work;
struct work_struct done;
+ /* Cache IRQ mask */
+ u32 sdcard_irq_mask;
+ u32 sdio_irq_mask;
+
spinlock_t lock; /* protect host private data */
unsigned long last_req_ts;
struct mutex ios_lock; /* protect set_ios() context */
@@ -93,6 +97,9 @@
void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
irqreturn_t tmio_mmc_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid);
+irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid);
static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg,
unsigned long *flags)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 1f16357..d85a60c 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -48,14 +48,14 @@
void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
{
- u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ);
- sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+ host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ);
+ sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
}
void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
{
- u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ);
- sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+ host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ);
+ sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask);
}
static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
@@ -92,7 +92,7 @@
static void pr_debug_status(u32 status)
{
int i = 0;
- printk(KERN_DEBUG "status: %08x = ", status);
+ pr_debug("status: %08x = ", status);
STATUS_TO_TEXT(CARD_REMOVE, status, i);
STATUS_TO_TEXT(CARD_INSERT, status, i);
STATUS_TO_TEXT(SIGSTATE, status, i);
@@ -127,11 +127,13 @@
if (enable) {
host->sdio_irq_enabled = 1;
+ host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
+ ~TMIO_SDIO_STAT_IOIRQ;
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
- sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
- (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
+ sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
} else {
- sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
+ host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
+ sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
host->sdio_irq_enabled = 0;
}
@@ -543,45 +545,20 @@
spin_unlock(&host->lock);
}
-irqreturn_t tmio_mmc_irq(int irq, void *devid)
+static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host,
+ int *ireg, int *status)
{
- struct tmio_mmc_host *host = devid;
+ *status = sd_ctrl_read32(host, CTL_STATUS);
+ *ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask;
+
+ pr_debug_status(*status);
+ pr_debug_status(*ireg);
+}
+
+static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
+ int ireg, int status)
+{
struct mmc_host *mmc = host->mmc;
- struct tmio_mmc_data *pdata = host->pdata;
- unsigned int ireg, irq_mask, status;
- unsigned int sdio_ireg, sdio_irq_mask, sdio_status;
-
- pr_debug("MMC IRQ begin\n");
-
- status = sd_ctrl_read32(host, CTL_STATUS);
- irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
- ireg = status & TMIO_MASK_IRQ & ~irq_mask;
-
- sdio_ireg = 0;
- if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
- sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
- sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
- sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;
-
- sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
-
- if (sdio_ireg && !host->sdio_irq_enabled) {
- pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
- sdio_status, sdio_irq_mask, sdio_ireg);
- tmio_mmc_enable_sdio_irq(mmc, 0);
- goto out;
- }
-
- if (mmc->caps & MMC_CAP_SDIO_IRQ &&
- sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
- mmc_signal_sdio_irq(mmc);
-
- if (sdio_ireg)
- goto out;
- }
-
- pr_debug_status(status);
- pr_debug_status(ireg);
/* Card insert / remove attempts */
if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
@@ -591,43 +568,102 @@
((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
!work_pending(&mmc->detect.work))
mmc_detect_change(host->mmc, msecs_to_jiffies(100));
- goto out;
+ return true;
}
- /* CRC and other errors */
-/* if (ireg & TMIO_STAT_ERR_IRQ)
- * handled |= tmio_error_irq(host, irq, stat);
- */
+ return false;
+}
+irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid)
+{
+ unsigned int ireg, status;
+ struct tmio_mmc_host *host = devid;
+
+ tmio_mmc_card_irq_status(host, &ireg, &status);
+ __tmio_mmc_card_detect_irq(host, ireg, status);
+
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_card_detect_irq);
+
+static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host,
+ int ireg, int status)
+{
/* Command completion */
if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
tmio_mmc_ack_mmc_irqs(host,
TMIO_STAT_CMDRESPEND |
TMIO_STAT_CMDTIMEOUT);
tmio_mmc_cmd_irq(host, status);
- goto out;
+ return true;
}
/* Data transfer */
if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
tmio_mmc_pio_irq(host);
- goto out;
+ return true;
}
/* Data transfer completion */
if (ireg & TMIO_STAT_DATAEND) {
tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
tmio_mmc_data_irq(host);
- goto out;
+ return true;
}
- pr_warning("tmio_mmc: Spurious irq, disabling! "
- "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
- pr_debug_status(status);
- tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask);
+ return false;
+}
-out:
+irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid)
+{
+ unsigned int ireg, status;
+ struct tmio_mmc_host *host = devid;
+
+ tmio_mmc_card_irq_status(host, &ireg, &status);
+ __tmio_mmc_sdcard_irq(host, ireg, status);
+
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_sdcard_irq);
+
+irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
+{
+ struct tmio_mmc_host *host = devid;
+ struct mmc_host *mmc = host->mmc;
+ struct tmio_mmc_data *pdata = host->pdata;
+ unsigned int ireg, status;
+
+ if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
+ return IRQ_HANDLED;
+
+ status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
+ ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
+
+ sd_ctrl_write16(host, CTL_SDIO_STATUS, status & ~TMIO_SDIO_MASK_ALL);
+
+ if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
+ mmc_signal_sdio_irq(mmc);
+
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(tmio_mmc_sdio_irq);
+
+irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+ struct tmio_mmc_host *host = devid;
+ unsigned int ireg, status;
+
+ pr_debug("MMC IRQ begin\n");
+
+ tmio_mmc_card_irq_status(host, &ireg, &status);
+ if (__tmio_mmc_card_detect_irq(host, ireg, status))
+ return IRQ_HANDLED;
+ if (__tmio_mmc_sdcard_irq(host, ireg, status))
+ return IRQ_HANDLED;
+
+ tmio_mmc_sdio_irq(irq, devid);
+
return IRQ_HANDLED;
}
EXPORT_SYMBOL(tmio_mmc_irq);
@@ -882,6 +918,7 @@
tmio_mmc_clk_stop(_host);
tmio_mmc_reset(_host);
+ _host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
if (pdata->flags & TMIO_MMC_SDIO_IRQ)
tmio_mmc_enable_sdio_irq(mmc, 0);
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 4dfe2c0..4b83c43 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -9,6 +9,7 @@
*/
#include <linux/pci.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/highmem.h>
#include <linux/delay.h>
@@ -1191,7 +1192,7 @@
mmiowb();
if (sdhost->mrq) {
- printk(KERN_ERR "%s: Controller removed during "
+ pr_err("%s: Controller removed during "
"transfer\n", mmc_hostname(sdhost->mmc));
/* make sure all DMA is stopped */
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 62e5a4d..64acd9c 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -194,7 +194,7 @@
{
u8 setup;
- printk(KERN_ERR "%s: Resetting chip\n", mmc_hostname(host->mmc));
+ pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc));
/*
* Soft reset of chip (SD/MMC part).
@@ -721,7 +721,7 @@
* Any leftover data?
*/
if (count) {
- printk(KERN_ERR "%s: Incomplete DMA transfer. "
+ pr_err("%s: Incomplete DMA transfer. "
"%d bytes left.\n",
mmc_hostname(host->mmc), count);
@@ -803,7 +803,7 @@
default:
#ifdef CONFIG_MMC_DEBUG
- printk(KERN_WARNING "%s: Data command %d is not "
+ pr_warning("%s: Data command %d is not "
"supported by this controller.\n",
mmc_hostname(host->mmc), cmd->opcode);
#endif
@@ -1029,7 +1029,7 @@
host->flags &= ~WBSD_FCARD_PRESENT;
if (host->mrq) {
- printk(KERN_ERR "%s: Card removed during transfer!\n",
+ pr_err("%s: Card removed during transfer!\n",
mmc_hostname(host->mmc));
wbsd_reset(host);
@@ -1429,7 +1429,7 @@
free_dma(dma);
err:
- printk(KERN_WARNING DRIVER_NAME ": Unable to allocate DMA %d. "
+ pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. "
"Falling back on FIFO.\n", dma);
}
@@ -1664,7 +1664,7 @@
ret = wbsd_scan(host);
if (ret) {
if (pnp && (ret == -ENODEV)) {
- printk(KERN_WARNING DRIVER_NAME
+ pr_warning(DRIVER_NAME
": Unable to confirm device presence. You may "
"experience lock-ups.\n");
} else {
@@ -1688,7 +1688,7 @@
*/
if (pnp) {
if ((host->config != 0) && !wbsd_chip_validate(host)) {
- printk(KERN_WARNING DRIVER_NAME
+ pr_warning(DRIVER_NAME
": PnP active but chip not configured! "
"You probably have a buggy BIOS. "
"Configuring chip manually.\n");
@@ -1720,7 +1720,7 @@
mmc_add_host(mmc);
- printk(KERN_INFO "%s: W83L51xD", mmc_hostname(mmc));
+ pr_info("%s: W83L51xD", mmc_hostname(mmc));
if (host->chip_id != 0)
printk(" id %x", (int)host->chip_id);
printk(" at 0x%x irq %d", (int)host->base, (int)host->irq);
@@ -1909,7 +1909,7 @@
*/
if (host->config != 0) {
if (!wbsd_chip_validate(host)) {
- printk(KERN_WARNING DRIVER_NAME
+ pr_warning(DRIVER_NAME
": PnP active but chip not configured! "
"You probably have a buggy BIOS. "
"Configuring chip manually.\n");
@@ -1973,9 +1973,9 @@
{
int result;
- printk(KERN_INFO DRIVER_NAME
+ pr_info(DRIVER_NAME
": Winbond W83L51xD SD/MMC card interface driver\n");
- printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+ pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
#ifdef CONFIG_PNP
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index f1af222..61086ea 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1144,7 +1144,7 @@
if (mtd_ino) {
/* Destroy the inode if it exists */
- mtd_ino->i_nlink = 0;
+ clear_nlink(mtd_ino);
iput(mtd_ino);
}
}
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 78017eb..9e6b498 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/board-ams-delta.h>
/*
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index a916dec..6a1d6d9 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -40,7 +40,7 @@
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index b33c099..0ae0d7c 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2110,9 +2110,6 @@
read_lock(&bond->lock);
- if (bond->kill_timers)
- goto out;
-
//check if there are any slaves
if (bond->slave_cnt == 0)
goto re_arm;
@@ -2161,9 +2158,8 @@
}
re_arm:
- if (!bond->kill_timers)
- queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
-out:
+ queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
+
read_unlock(&bond->lock);
}
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index d4fbd2e..106b88a 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1343,10 +1343,6 @@
read_lock(&bond->lock);
- if (bond->kill_timers) {
- goto out;
- }
-
if (bond->slave_cnt == 0) {
bond_info->tx_rebalance_counter = 0;
bond_info->lp_counter = 0;
@@ -1401,10 +1397,13 @@
/*
* dev_set_promiscuity requires rtnl and
- * nothing else.
+ * nothing else. Avoid race with bond_close.
*/
read_unlock(&bond->lock);
- rtnl_lock();
+ if (!rtnl_trylock()) {
+ read_lock(&bond->lock);
+ goto re_arm;
+ }
bond_info->rlb_promisc_timeout_counter = 0;
@@ -1440,9 +1439,8 @@
}
re_arm:
- if (!bond->kill_timers)
- queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
-out:
+ queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
+
read_unlock(&bond->lock);
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index c5944f1..c34cc1e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -773,9 +773,6 @@
read_lock(&bond->lock);
- if (bond->kill_timers)
- goto out;
-
/* rejoin all groups on bond device */
__bond_resend_igmp_join_requests(bond->dev);
@@ -789,9 +786,9 @@
__bond_resend_igmp_join_requests(vlan_dev);
}
- if ((--bond->igmp_retrans > 0) && !bond->kill_timers)
+ if (--bond->igmp_retrans > 0)
queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
-out:
+
read_unlock(&bond->lock);
}
@@ -2517,10 +2514,11 @@
struct bonding *bond = container_of(work, struct bonding,
mii_work.work);
bool should_notify_peers = false;
+ unsigned long delay;
read_lock(&bond->lock);
- if (bond->kill_timers)
- goto out;
+
+ delay = msecs_to_jiffies(bond->params.miimon);
if (bond->slave_cnt == 0)
goto re_arm;
@@ -2529,7 +2527,15 @@
if (bond_miimon_inspect(bond)) {
read_unlock(&bond->lock);
- rtnl_lock();
+
+ /* Race avoidance with bond_close cancel of workqueue */
+ if (!rtnl_trylock()) {
+ read_lock(&bond->lock);
+ delay = 1;
+ should_notify_peers = false;
+ goto re_arm;
+ }
+
read_lock(&bond->lock);
bond_miimon_commit(bond);
@@ -2540,14 +2546,18 @@
}
re_arm:
- if (bond->params.miimon && !bond->kill_timers)
- queue_delayed_work(bond->wq, &bond->mii_work,
- msecs_to_jiffies(bond->params.miimon));
-out:
+ if (bond->params.miimon)
+ queue_delayed_work(bond->wq, &bond->mii_work, delay);
+
read_unlock(&bond->lock);
if (should_notify_peers) {
- rtnl_lock();
+ if (!rtnl_trylock()) {
+ read_lock(&bond->lock);
+ bond->send_peer_notif++;
+ read_unlock(&bond->lock);
+ return;
+ }
netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
rtnl_unlock();
}
@@ -2789,9 +2799,6 @@
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
- if (bond->kill_timers)
- goto out;
-
if (bond->slave_cnt == 0)
goto re_arm;
@@ -2888,9 +2895,9 @@
}
re_arm:
- if (bond->params.arp_interval && !bond->kill_timers)
+ if (bond->params.arp_interval)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
-out:
+
read_unlock(&bond->lock);
}
@@ -3131,9 +3138,6 @@
read_lock(&bond->lock);
- if (bond->kill_timers)
- goto out;
-
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
if (bond->slave_cnt == 0)
@@ -3143,7 +3147,15 @@
if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
read_unlock(&bond->lock);
- rtnl_lock();
+
+ /* Race avoidance with bond_close flush of workqueue */
+ if (!rtnl_trylock()) {
+ read_lock(&bond->lock);
+ delta_in_ticks = 1;
+ should_notify_peers = false;
+ goto re_arm;
+ }
+
read_lock(&bond->lock);
bond_ab_arp_commit(bond, delta_in_ticks);
@@ -3156,13 +3168,18 @@
bond_ab_arp_probe(bond);
re_arm:
- if (bond->params.arp_interval && !bond->kill_timers)
+ if (bond->params.arp_interval)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
-out:
+
read_unlock(&bond->lock);
if (should_notify_peers) {
- rtnl_lock();
+ if (!rtnl_trylock()) {
+ read_lock(&bond->lock);
+ bond->send_peer_notif++;
+ read_unlock(&bond->lock);
+ return;
+ }
netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
rtnl_unlock();
}
@@ -3424,8 +3441,6 @@
struct slave *slave;
int i;
- bond->kill_timers = 0;
-
/* reset slave->backup and slave->inactive */
read_lock(&bond->lock);
if (bond->slave_cnt > 0) {
@@ -3494,33 +3509,30 @@
bond->send_peer_notif = 0;
- /* signal timers not to re-arm */
- bond->kill_timers = 1;
-
write_unlock_bh(&bond->lock);
if (bond->params.miimon) { /* link check interval, in milliseconds. */
- cancel_delayed_work(&bond->mii_work);
+ cancel_delayed_work_sync(&bond->mii_work);
}
if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
- cancel_delayed_work(&bond->arp_work);
+ cancel_delayed_work_sync(&bond->arp_work);
}
switch (bond->params.mode) {
case BOND_MODE_8023AD:
- cancel_delayed_work(&bond->ad_work);
+ cancel_delayed_work_sync(&bond->ad_work);
break;
case BOND_MODE_TLB:
case BOND_MODE_ALB:
- cancel_delayed_work(&bond->alb_work);
+ cancel_delayed_work_sync(&bond->alb_work);
break;
default:
break;
}
if (delayed_work_pending(&bond->mcast_work))
- cancel_delayed_work(&bond->mcast_work);
+ cancel_delayed_work_sync(&bond->mcast_work);
if (bond_is_lb(bond)) {
/* Must be called only after all
@@ -4367,26 +4379,22 @@
static void bond_work_cancel_all(struct bonding *bond)
{
- write_lock_bh(&bond->lock);
- bond->kill_timers = 1;
- write_unlock_bh(&bond->lock);
-
if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
- cancel_delayed_work(&bond->mii_work);
+ cancel_delayed_work_sync(&bond->mii_work);
if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
- cancel_delayed_work(&bond->arp_work);
+ cancel_delayed_work_sync(&bond->arp_work);
if (bond->params.mode == BOND_MODE_ALB &&
delayed_work_pending(&bond->alb_work))
- cancel_delayed_work(&bond->alb_work);
+ cancel_delayed_work_sync(&bond->alb_work);
if (bond->params.mode == BOND_MODE_8023AD &&
delayed_work_pending(&bond->ad_work))
- cancel_delayed_work(&bond->ad_work);
+ cancel_delayed_work_sync(&bond->ad_work);
if (delayed_work_pending(&bond->mcast_work))
- cancel_delayed_work(&bond->mcast_work);
+ cancel_delayed_work_sync(&bond->mcast_work);
}
/*
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 82fec5f..1aecc37 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -222,7 +222,6 @@
struct slave *);
rwlock_t lock;
rwlock_t curr_slave_lock;
- s8 kill_timers;
u8 send_peer_notif;
s8 setup_by_slave;
s8 igmp_retrans;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 627a580..aec7212 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -23,8 +23,8 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.70.00-0"
-#define DRV_MODULE_RELDATE "2011/06/13"
+#define DRV_MODULE_VERSION "1.70.30-0"
+#define DRV_MODULE_RELDATE "2011/10/25"
#define BNX2X_BC_VER 0x040200
#if defined(CONFIG_DCB)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 1a6e37c..f0ca8b2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -329,6 +329,7 @@
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
break;
case PORT_FIBRE:
+ case PORT_DA:
if (bp->port.supported[cfg_idx] & SUPPORTED_FIBRE)
break; /* no port change */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index e44b858..fc754cb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -2550,7 +2550,7 @@
#define BCM_5710_FW_MAJOR_VERSION 7
#define BCM_5710_FW_MINOR_VERSION 0
-#define BCM_5710_FW_REVISION_VERSION 23
+#define BCM_5710_FW_REVISION_VERSION 29
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 818723c..bce203f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -45,6 +45,9 @@
#define MCPR_IMC_COMMAND_READ_OP 1
#define MCPR_IMC_COMMAND_WRITE_OP 2
+/* LED Blink rate that will achieve ~15.9Hz */
+#define LED_BLINK_RATE_VAL_E3 354
+#define LED_BLINK_RATE_VAL_E1X_E2 480
/***********************************************************/
/* Shortcut definitions */
/***********************************************************/
@@ -258,6 +261,7 @@
#define MAX_PACKET_SIZE (9700)
#define WC_UC_TIMEOUT 100
+#define MAX_KR_LINK_RETRY 4
/**********************************************************/
/* INTERFACE */
@@ -1490,6 +1494,18 @@
NIG_REG_P0_MAC_PAUSE_OUT_EN, tx_pause_en);
}
+static void bnx2x_umac_disable(struct link_params *params)
+{
+ u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+ struct bnx2x *bp = params->bp;
+ if (!(REG_RD(bp, MISC_REG_RESET_REG_2) &
+ (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)))
+ return;
+
+ /* Disable RX and TX */
+ REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, 0);
+}
+
static void bnx2x_umac_enable(struct link_params *params,
struct link_vars *vars, u8 lb)
{
@@ -1599,8 +1615,9 @@
}
/* Define the XMAC mode */
-static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
+static void bnx2x_xmac_init(struct link_params *params, u32 max_speed)
{
+ struct bnx2x *bp = params->bp;
u32 is_port4mode = bnx2x_is_4_port_mode(bp);
/**
@@ -1610,7 +1627,8 @@
* ports of the path
**/
- if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ if ((CHIP_NUM(bp) == CHIP_NUM_57840) &&
+ (REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)) {
DP(NETIF_MSG_LINK,
"XMAC already out of reset in 4-port mode\n");
@@ -1677,10 +1695,6 @@
(pfc_ctrl | (1<<1)));
DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port);
REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0);
- usleep_range(1000, 1000);
- bnx2x_set_xumac_nig(params, 0, 0);
- REG_WR(bp, xmac_base + XMAC_REG_CTRL,
- XMAC_CTRL_REG_SOFT_RESET);
}
}
@@ -1693,7 +1707,7 @@
xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
- bnx2x_xmac_init(bp, vars->line_speed);
+ bnx2x_xmac_init(params, vars->line_speed);
/*
* This register determines on which events the MAC will assert
@@ -3575,6 +3589,11 @@
u16 val16 = 0, lane, bam37 = 0;
struct bnx2x *bp = params->bp;
DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n");
+
+ /* Disable Autoneg: re-enable it after adv is done. */
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+ MDIO_WC_REG_IEEE0BLK_MIICNTL, 0);
+
/* Check adding advertisement for 1G KX */
if (((vars->line_speed == SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
@@ -3616,9 +3635,6 @@
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL,
0x03f0);
- bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
- 0x383f);
/* Advertised speeds */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
@@ -3645,19 +3661,22 @@
/* Advertise pause */
bnx2x_ext_phy_set_pause(params, phy, vars);
- /* Enable Autoneg */
- bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
- MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1000);
-
- /* Over 1G - AN local device user page 1 */
- bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_DIGITAL3_UP1, 0x1f);
+ vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_MISC7, &val16);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_MISC7, val16 | 0x100);
+
+ /* Over 1G - AN local device user page 1 */
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_DIGITAL3_UP1, 0x1f);
+
+ /* Enable Autoneg */
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+ MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1000);
+
}
static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
@@ -4126,6 +4145,85 @@
else
return 0;
}
+static int bnx2x_warpcore_get_sigdet(struct bnx2x_phy *phy,
+ struct link_params *params)
+{
+ u16 gp2_status_reg0, lane;
+ struct bnx2x *bp = params->bp;
+
+ lane = bnx2x_get_warpcore_lane(phy, params);
+
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_0,
+ &gp2_status_reg0);
+
+ return (gp2_status_reg0 >> (8+lane)) & 0x1;
+}
+
+static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy,
+ struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ u32 serdes_net_if;
+ u16 gp_status1 = 0, lnkup = 0, lnkup_kr = 0;
+ u16 lane = bnx2x_get_warpcore_lane(phy, params);
+
+ vars->turn_to_run_wc_rt = vars->turn_to_run_wc_rt ? 0 : 1;
+
+ if (!vars->turn_to_run_wc_rt)
+ return;
+
+ /* return if there is no link partner */
+ if (!(bnx2x_warpcore_get_sigdet(phy, params))) {
+ DP(NETIF_MSG_LINK, "bnx2x_warpcore_get_sigdet false\n");
+ return;
+ }
+
+ if (vars->rx_tx_asic_rst) {
+ serdes_net_if = (REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].default_cfg)) &
+ PORT_HW_CFG_NET_SERDES_IF_MASK);
+
+ switch (serdes_net_if) {
+ case PORT_HW_CFG_NET_SERDES_IF_KR:
+ /* Do we get link yet? */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, 0x81d1,
+ &gp_status1);
+ lnkup = (gp_status1 >> (8+lane)) & 0x1;/* 1G */
+ /*10G KR*/
+ lnkup_kr = (gp_status1 >> (12+lane)) & 0x1;
+
+ DP(NETIF_MSG_LINK,
+ "gp_status1 0x%x\n", gp_status1);
+
+ if (lnkup_kr || lnkup) {
+ vars->rx_tx_asic_rst = 0;
+ DP(NETIF_MSG_LINK,
+ "link up, rx_tx_asic_rst 0x%x\n",
+ vars->rx_tx_asic_rst);
+ } else {
+ /*reset the lane to see if link comes up.*/
+ bnx2x_warpcore_reset_lane(bp, phy, 1);
+ bnx2x_warpcore_reset_lane(bp, phy, 0);
+
+ /* restart Autoneg */
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+ MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200);
+
+ vars->rx_tx_asic_rst--;
+ DP(NETIF_MSG_LINK, "0x%x retry left\n",
+ vars->rx_tx_asic_rst);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ } /*params->rx_tx_asic_rst*/
+
+}
static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
struct link_params *params,
@@ -5896,7 +5994,13 @@
SHARED_HW_CFG_LED_MAC1);
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
- EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
+ if (params->phy[EXT_PHY1].type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE)
+ EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp & 0xfff1);
+ else {
+ EMAC_WR(bp, EMAC_REG_EMAC_LED,
+ (tmp | EMAC_LED_OVERRIDE));
+ }
break;
case LED_MODE_OPER:
@@ -5949,17 +6053,33 @@
else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
hw_led_mode);
+ } else if ((params->phy[EXT_PHY1].type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) &&
+ (mode != LED_MODE_OPER)) {
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+ tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+ EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | 0x3);
} else
- REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+ hw_led_mode);
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
/* Set blinking rate to ~15.9Hz */
- REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
- LED_BLINK_RATE_VAL);
+ if (CHIP_IS_E3(bp))
+ REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
+ LED_BLINK_RATE_VAL_E3);
+ else
+ REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
+ LED_BLINK_RATE_VAL_E1X_E2);
REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
port*4, 1);
- tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
- EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp & (~EMAC_LED_OVERRIDE)));
+ if ((params->phy[EXT_PHY1].type !=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) &&
+ (mode != LED_MODE_OPER)) {
+ tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+ EMAC_WR(bp, EMAC_REG_EMAC_LED,
+ (tmp & (~EMAC_LED_OVERRIDE)));
+ }
if (CHIP_IS_E1(bp) &&
((speed == SPEED_2500) ||
@@ -6218,8 +6338,10 @@
MISC_REGISTERS_RESET_REG_2_CLEAR,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
}
- if (CHIP_IS_E3(bp))
+ if (CHIP_IS_E3(bp)) {
bnx2x_xmac_disable(params);
+ bnx2x_umac_disable(params);
+ }
return 0;
}
@@ -10205,22 +10327,6 @@
return 0;
}
-static void bnx2x_54618se_set_link_led(struct bnx2x_phy *phy,
- struct link_params *params, u8 mode)
-{
- struct bnx2x *bp = params->bp;
- DP(NETIF_MSG_LINK, "54618SE set link led (mode=%x)\n", mode);
- switch (mode) {
- case LED_MODE_FRONT_PANEL_OFF:
- case LED_MODE_OFF:
- case LED_MODE_OPER:
- case LED_MODE_ON:
- default:
- break;
- }
- return;
-}
-
static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
@@ -10997,7 +11103,7 @@
.config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)bnx2x_54618se_set_link_led,
+ .set_link_led = (set_link_led_t)NULL,
.phy_specific_func = (phy_specific_func_t)NULL
};
/*****************************************************************/
@@ -11718,8 +11824,10 @@
/* Stop BigMac rx */
if (!CHIP_IS_E3(bp))
bnx2x_bmac_rx_disable(bp, port);
- else
+ else {
bnx2x_xmac_disable(params);
+ bnx2x_umac_disable(params);
+ }
/* disable emac */
if (!CHIP_IS_E3(bp))
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
@@ -11757,14 +11865,21 @@
if (params->phy[INT_PHY].link_reset)
params->phy[INT_PHY].link_reset(
¶ms->phy[INT_PHY], params);
- /* reset BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
/* disable nig ingress interface */
if (!CHIP_IS_E3(bp)) {
+ /* reset BigMac */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0);
REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0);
+ } else {
+ u32 xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+ bnx2x_set_xumac_nig(params, 0, 0);
+ if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ MISC_REGISTERS_RESET_REG_2_XMAC)
+ REG_WR(bp, xmac_base + XMAC_REG_CTRL,
+ XMAC_CTRL_REG_SOFT_RESET);
}
vars->link_up = 0;
vars->phy_flags = 0;
@@ -12332,11 +12447,6 @@
{
struct bnx2x *bp = params->bp;
u16 phy_idx;
- if (!params) {
- DP(NETIF_MSG_LINK, "Uninitialized params !\n");
- return;
- }
-
for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) {
if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) {
bnx2x_set_aer_mmd(params, ¶ms->phy[phy_idx]);
@@ -12345,8 +12455,13 @@
}
}
- if (CHIP_IS_E3(bp))
+ if (CHIP_IS_E3(bp)) {
+ struct bnx2x_phy *phy = ¶ms->phy[INT_PHY];
+ bnx2x_set_aer_mmd(params, phy);
bnx2x_check_over_curr(params, vars);
+ bnx2x_warpcore_config_runtime(phy, params, vars);
+ }
+
}
u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index c12db6d..2a46e63 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -303,6 +303,9 @@
#define PERIODIC_FLAGS_LINK_EVENT 0x0001
u32 aeu_int_mask;
+ u8 rx_tx_asic_rst;
+ u8 turn_to_run_wc_rt;
+ u16 rsrv2;
};
/***********************************************************/
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 1b0ba8c..56624d30 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -35,7 +35,7 @@
#include <asm/mach-types.h>
#include <mach/at91rm9200_emac.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/board.h>
#include "at91_ether.h"
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index e0ff961..824b8e6 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -428,28 +428,33 @@
return &wrb->payload.sgl[0];
}
-/* Don't touch the hdr after it's prepared */
-static void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
- bool embedded, u8 sge_cnt, u32 opcode)
-{
- if (embedded)
- wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
- else
- wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
- MCC_WRB_SGE_CNT_SHIFT;
- wrb->payload_length = payload_len;
- wrb->tag0 = opcode;
- be_dws_cpu_to_le(wrb, 8);
-}
/* Don't touch the hdr after it's prepared */
-static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
- u8 subsystem, u8 opcode, int cmd_len)
+/* mem will be NULL for embedded commands */
+static void be_wrb_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+ u8 subsystem, u8 opcode, int cmd_len,
+ struct be_mcc_wrb *wrb, struct be_dma_mem *mem)
{
+ struct be_sge *sge;
+
req_hdr->opcode = opcode;
req_hdr->subsystem = subsystem;
req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
req_hdr->version = 0;
+
+ wrb->tag0 = opcode;
+ wrb->tag1 = subsystem;
+ wrb->payload_length = cmd_len;
+ if (mem) {
+ wrb->embedded |= (1 & MCC_WRB_SGE_CNT_MASK) <<
+ MCC_WRB_SGE_CNT_SHIFT;
+ sge = nonembedded_sgl(wrb);
+ sge->pa_hi = cpu_to_le32(upper_32_bits(mem->dma));
+ sge->pa_lo = cpu_to_le32(mem->dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(mem->size);
+ } else
+ wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
+ be_dws_cpu_to_le(wrb, 8);
}
static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
@@ -586,10 +591,8 @@
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, OPCODE_COMMON_EQ_CREATE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_EQ_CREATE, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_EQ_CREATE, sizeof(*req), wrb, NULL);
req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
@@ -632,12 +635,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_NTWK_MAC_QUERY);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_MAC_QUERY, sizeof(*req));
-
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_MAC_QUERY, sizeof(*req), wrb, NULL);
req->type = type;
if (permanent) {
req->permanent = 1;
@@ -674,11 +673,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_NTWK_PMAC_ADD);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_PMAC_ADD, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_PMAC_ADD, sizeof(*req), wrb, NULL);
req->hdr.domain = domain;
req->if_id = cpu_to_le32(if_id);
@@ -692,6 +688,10 @@
err:
spin_unlock_bh(&adapter->mcc_lock);
+
+ if (status == MCC_STATUS_UNAUTHORIZED_REQUEST)
+ status = -EPERM;
+
return status;
}
@@ -711,11 +711,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_NTWK_PMAC_DEL);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_PMAC_DEL, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_PMAC_DEL, sizeof(*req), wrb, NULL);
req->hdr.domain = dom;
req->if_id = cpu_to_le32(if_id);
@@ -746,11 +743,8 @@
req = embedded_payload(wrb);
ctxt = &req->context;
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_CQ_CREATE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_CQ_CREATE, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_CQ_CREATE, sizeof(*req), wrb, NULL);
req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
if (lancer_chip(adapter)) {
@@ -822,11 +816,8 @@
req = embedded_payload(wrb);
ctxt = &req->context;
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_MCC_CREATE_EXT);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_MCC_CREATE_EXT, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MCC_CREATE_EXT, sizeof(*req), wrb, NULL);
req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
if (lancer_chip(adapter)) {
@@ -882,11 +873,8 @@
req = embedded_payload(wrb);
ctxt = &req->context;
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_MCC_CREATE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_MCC_CREATE, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MCC_CREATE, sizeof(*req), wrb, NULL);
req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
@@ -943,11 +931,8 @@
req = embedded_payload(wrb);
ctxt = &req->context;
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_ETH_TX_CREATE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_TX_CREATE,
- sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_TX_CREATE, sizeof(*req), wrb, NULL);
if (lancer_chip(adapter)) {
req->hdr.version = 1;
@@ -999,11 +984,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_ETH_RX_CREATE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_RX_CREATE,
- sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_RX_CREATE, sizeof(*req), wrb, NULL);
req->cq_id = cpu_to_le16(cq_id);
req->frag_size = fls(frag_size) - 1;
@@ -1071,9 +1053,8 @@
BUG();
}
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, opcode);
-
- be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req), wrb,
+ NULL);
req->id = cpu_to_le16(q->id);
status = be_mbox_notify_wait(adapter);
@@ -1100,9 +1081,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, OPCODE_ETH_RX_DESTROY);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_RX_DESTROY,
- sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_RX_DESTROY, sizeof(*req), wrb, NULL);
req->id = cpu_to_le16(q->id);
status = be_mcc_notify_wait(adapter);
@@ -1133,12 +1113,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_NTWK_INTERFACE_CREATE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req));
-
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req), wrb, NULL);
req->hdr.domain = domain;
req->capability_flags = cpu_to_le32(cap_flags);
req->enable_flags = cpu_to_le32(en_flags);
@@ -1182,12 +1158,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_NTWK_INTERFACE_DESTROY);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req));
-
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req), wrb, NULL);
req->hdr.domain = domain;
req->interface_id = cpu_to_le32(interface_id);
@@ -1205,7 +1177,6 @@
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_hdr *hdr;
- struct be_sge *sge;
int status = 0;
if (MODULO(adapter->work_counter, be_get_temp_freq) == 0)
@@ -1219,22 +1190,13 @@
goto err;
}
hdr = nonemb_cmd->va;
- sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1,
- OPCODE_ETH_GET_STATISTICS);
-
- be_cmd_hdr_prepare(hdr, CMD_SUBSYSTEM_ETH,
- OPCODE_ETH_GET_STATISTICS, nonemb_cmd->size);
+ be_wrb_cmd_hdr_prepare(hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_GET_STATISTICS, nonemb_cmd->size, wrb, nonemb_cmd);
if (adapter->generation == BE_GEN3)
hdr->version = 1;
- wrb->tag1 = CMD_SUBSYSTEM_ETH;
- sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
- sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(nonemb_cmd->size);
-
be_mcc_notify(adapter);
adapter->stats_cmd_sent = true;
@@ -1250,7 +1212,6 @@
struct be_mcc_wrb *wrb;
struct lancer_cmd_req_pport_stats *req;
- struct be_sge *sge;
int status = 0;
spin_lock_bh(&adapter->mcc_lock);
@@ -1261,23 +1222,14 @@
goto err;
}
req = nonemb_cmd->va;
- sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1,
- OPCODE_ETH_GET_PPORT_STATS);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
- OPCODE_ETH_GET_PPORT_STATS, nonemb_cmd->size);
-
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_GET_PPORT_STATS, nonemb_cmd->size, wrb,
+ nonemb_cmd);
req->cmd_params.params.pport_num = cpu_to_le16(adapter->port_num);
req->cmd_params.params.reset_stats = 0;
- wrb->tag1 = CMD_SUBSYSTEM_ETH;
- sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
- sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(nonemb_cmd->size);
-
be_mcc_notify(adapter);
adapter->stats_cmd_sent = true;
@@ -1303,11 +1255,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_NTWK_LINK_STATUS_QUERY);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req), wrb, NULL);
status = be_mcc_notify_wait(adapter);
if (!status) {
@@ -1343,11 +1292,9 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES, sizeof(*req),
+ wrb, NULL);
wrb->tag1 = mccq_index;
@@ -1374,11 +1321,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_MANAGE_FAT);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_MANAGE_FAT, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MANAGE_FAT, sizeof(*req), wrb, NULL);
req->fat_operation = cpu_to_le32(QUERY_FAT);
status = be_mcc_notify_wait(adapter);
if (!status) {
@@ -1397,7 +1341,6 @@
struct be_dma_mem get_fat_cmd;
struct be_mcc_wrb *wrb;
struct be_cmd_req_get_fat *req;
- struct be_sge *sge;
u32 offset = 0, total_size, buf_size,
log_offset = sizeof(u32), payload_len;
int status;
@@ -1430,18 +1373,11 @@
goto err;
}
req = get_fat_cmd.va;
- sge = nonembedded_sgl(wrb);
payload_len = sizeof(struct be_cmd_req_get_fat) + buf_size;
- be_wrb_hdr_prepare(wrb, payload_len, false, 1,
- OPCODE_COMMON_MANAGE_FAT);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_MANAGE_FAT, payload_len);
-
- sge->pa_hi = cpu_to_le32(upper_32_bits(get_fat_cmd.dma));
- sge->pa_lo = cpu_to_le32(get_fat_cmd.dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(get_fat_cmd.size);
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MANAGE_FAT, payload_len, wrb,
+ &get_fat_cmd);
req->fat_operation = cpu_to_le32(RETRIEVE_FAT);
req->read_log_offset = cpu_to_le32(log_offset);
@@ -1485,11 +1421,9 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_GET_FW_VERSION);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_GET_FW_VERSION, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_FW_VERSION, sizeof(*req), wrb, NULL);
status = be_mcc_notify_wait(adapter);
if (!status) {
struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
@@ -1520,11 +1454,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_MODIFY_EQ_DELAY);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req), wrb, NULL);
req->num_eq = cpu_to_le32(1);
req->delay[0].eq_id = cpu_to_le32(eq_id);
@@ -1555,11 +1486,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_NTWK_VLAN_CONFIG);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_VLAN_CONFIG, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_VLAN_CONFIG, sizeof(*req), wrb, NULL);
req->interface_id = if_id;
req->promiscuous = promiscuous;
@@ -1582,7 +1510,6 @@
struct be_mcc_wrb *wrb;
struct be_dma_mem *mem = &adapter->rx_filter;
struct be_cmd_req_rx_filter *req = mem->va;
- struct be_sge *sge;
int status;
spin_lock_bh(&adapter->mcc_lock);
@@ -1592,16 +1519,10 @@
status = -EBUSY;
goto err;
}
- sge = nonembedded_sgl(wrb);
- sge->pa_hi = cpu_to_le32(upper_32_bits(mem->dma));
- sge->pa_lo = cpu_to_le32(mem->dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(mem->size);
- be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
- OPCODE_COMMON_NTWK_RX_FILTER);
-
memset(req, 0, sizeof(*req));
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_NTWK_RX_FILTER, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_RX_FILTER, sizeof(*req),
+ wrb, mem);
req->if_id = cpu_to_le32(adapter->if_handle);
if (flags & IFF_PROMISC) {
@@ -1646,11 +1567,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_SET_FLOW_CONTROL);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_SET_FLOW_CONTROL, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_SET_FLOW_CONTROL, sizeof(*req), wrb, NULL);
req->tx_flow_control = cpu_to_le16((u16)tx_fc);
req->rx_flow_control = cpu_to_le16((u16)rx_fc);
@@ -1678,11 +1596,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_GET_FLOW_CONTROL);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req), wrb, NULL);
status = be_mcc_notify_wait(adapter);
if (!status) {
@@ -1711,11 +1626,8 @@
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_QUERY_FIRMWARE_CONFIG);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req), wrb, NULL);
status = be_mbox_notify_wait(adapter);
if (!status) {
@@ -1742,11 +1654,8 @@
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_FUNCTION_RESET);
-
- be_cmd_hdr_prepare(req, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(req, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_FUNCTION_RESET, sizeof(*req), wrb, NULL);
status = be_mbox_notify_wait(adapter);
@@ -1768,11 +1677,8 @@
wrb = wrb_from_mbox(adapter);
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_ETH_RSS_CONFIG);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
- OPCODE_ETH_RSS_CONFIG, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_RSS_CONFIG, sizeof(*req), wrb, NULL);
req->if_id = cpu_to_le32(adapter->if_handle);
req->enable_rss = cpu_to_le16(RSS_ENABLE_TCP_IPV4 | RSS_ENABLE_IPV4);
@@ -1804,11 +1710,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_ENABLE_DISABLE_BEACON);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_ENABLE_DISABLE_BEACON, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_ENABLE_DISABLE_BEACON, sizeof(*req), wrb, NULL);
req->port_num = port_num;
req->beacon_state = state;
@@ -1838,11 +1741,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_GET_BEACON_STATE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_GET_BEACON_STATE, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_BEACON_STATE, sizeof(*req), wrb, NULL);
req->port_num = port_num;
@@ -1879,13 +1779,10 @@
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(struct lancer_cmd_req_write_object),
- true, 1, OPCODE_COMMON_WRITE_OBJECT);
- wrb->tag1 = CMD_SUBSYSTEM_COMMON;
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_WRITE_OBJECT,
- sizeof(struct lancer_cmd_req_write_object));
+ sizeof(struct lancer_cmd_req_write_object), wrb,
+ NULL);
ctxt = &req->context;
AMAP_SET_BITS(struct amap_lancer_write_obj_context,
@@ -1938,7 +1835,6 @@
{
struct be_mcc_wrb *wrb;
struct be_cmd_write_flashrom *req;
- struct be_sge *sge;
int status;
spin_lock_bh(&adapter->mcc_lock);
@@ -1950,17 +1846,9 @@
goto err_unlock;
}
req = cmd->va;
- sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, cmd->size, false, 1,
- OPCODE_COMMON_WRITE_FLASHROM);
- wrb->tag1 = CMD_SUBSYSTEM_COMMON;
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_WRITE_FLASHROM, cmd->size);
- sge->pa_hi = cpu_to_le32(upper_32_bits(cmd->dma));
- sge->pa_lo = cpu_to_le32(cmd->dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(cmd->size);
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_WRITE_FLASHROM, cmd->size, wrb, cmd);
req->params.op_type = cpu_to_le32(flash_type);
req->params.op_code = cpu_to_le32(flash_opcode);
@@ -1998,11 +1886,8 @@
}
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req)+4, true, 0,
- OPCODE_COMMON_READ_FLASHROM);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_READ_FLASHROM, sizeof(*req)+4);
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_READ_FLASHROM, sizeof(*req)+4, wrb, NULL);
req->params.op_type = cpu_to_le32(IMG_TYPE_REDBOOT);
req->params.op_code = cpu_to_le32(FLASHROM_OPER_REPORT);
@@ -2023,7 +1908,6 @@
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_acpi_wol_magic_config *req;
- struct be_sge *sge;
int status;
spin_lock_bh(&adapter->mcc_lock);
@@ -2034,19 +1918,12 @@
goto err;
}
req = nonemb_cmd->va;
- sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
- OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
- OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG, sizeof(*req), wrb,
+ nonemb_cmd);
memcpy(req->magic_mac, mac, ETH_ALEN);
- sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
- sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(nonemb_cmd->size);
-
status = be_mcc_notify_wait(adapter);
err:
@@ -2071,12 +1948,9 @@
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_LOWLEVEL_SET_LOOPBACK_MODE);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
- OPCODE_LOWLEVEL_SET_LOOPBACK_MODE,
- sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+ OPCODE_LOWLEVEL_SET_LOOPBACK_MODE, sizeof(*req), wrb,
+ NULL);
req->src_port = port_num;
req->dest_port = port_num;
@@ -2106,11 +1980,8 @@
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_LOWLEVEL_LOOPBACK_TEST);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
- OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+ OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req), wrb, NULL);
req->hdr.timeout = cpu_to_le32(4);
req->pattern = cpu_to_le64(pattern);
@@ -2136,7 +2007,6 @@
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_ddrdma_test *req;
- struct be_sge *sge;
int status;
int i, j = 0;
@@ -2148,15 +2018,8 @@
goto err;
}
req = cmd->va;
- sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, cmd->size, false, 1,
- OPCODE_LOWLEVEL_HOST_DDR_DMA);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
- OPCODE_LOWLEVEL_HOST_DDR_DMA, cmd->size);
-
- sge->pa_hi = cpu_to_le32(upper_32_bits(cmd->dma));
- sge->pa_lo = cpu_to_le32(cmd->dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(cmd->size);
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+ OPCODE_LOWLEVEL_HOST_DDR_DMA, cmd->size, wrb, cmd);
req->pattern = cpu_to_le64(pattern);
req->byte_count = cpu_to_le32(byte_cnt);
@@ -2201,15 +2064,9 @@
req = nonemb_cmd->va;
sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
- OPCODE_COMMON_SEEPROM_READ);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_SEEPROM_READ, sizeof(*req));
-
- sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
- sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(nonemb_cmd->size);
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_SEEPROM_READ, sizeof(*req), wrb,
+ nonemb_cmd);
status = be_mcc_notify_wait(adapter);
@@ -2223,7 +2080,6 @@
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_get_phy_info *req;
- struct be_sge *sge;
struct be_dma_mem cmd;
int status;
@@ -2244,18 +2100,10 @@
}
req = cmd.va;
- sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
- OPCODE_COMMON_GET_PHY_DETAILS);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_GET_PHY_DETAILS,
- sizeof(*req));
-
- sge->pa_hi = cpu_to_le32(upper_32_bits(cmd.dma));
- sge->pa_lo = cpu_to_le32(cmd.dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(cmd.size);
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_PHY_DETAILS, sizeof(*req),
+ wrb, &cmd);
status = be_mcc_notify_wait(adapter);
if (!status) {
@@ -2288,11 +2136,8 @@
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_SET_QOS);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_SET_QOS, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_SET_QOS, sizeof(*req), wrb, NULL);
req->hdr.domain = domain;
req->valid_bits = cpu_to_le32(BE_QOS_BITS_NIC);
@@ -2310,7 +2155,6 @@
struct be_mcc_wrb *wrb;
struct be_cmd_req_cntl_attribs *req;
struct be_cmd_resp_cntl_attribs *resp;
- struct be_sge *sge;
int status;
int payload_len = max(sizeof(*req), sizeof(*resp));
struct mgmt_controller_attrib *attribs;
@@ -2335,15 +2179,10 @@
goto err;
}
req = attribs_cmd.va;
- sge = nonembedded_sgl(wrb);
- be_wrb_hdr_prepare(wrb, payload_len, false, 1,
- OPCODE_COMMON_GET_CNTL_ATTRIBUTES);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_GET_CNTL_ATTRIBUTES, payload_len);
- sge->pa_hi = cpu_to_le32(upper_32_bits(attribs_cmd.dma));
- sge->pa_lo = cpu_to_le32(attribs_cmd.dma & 0xFFFFFFFF);
- sge->len = cpu_to_le32(attribs_cmd.size);
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_CNTL_ATTRIBUTES, payload_len, wrb,
+ &attribs_cmd);
status = be_mbox_notify_wait(adapter);
if (!status) {
@@ -2376,11 +2215,8 @@
req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
- OPCODE_COMMON_SET_DRIVER_FUNCTION_CAP);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_SET_DRIVER_FUNCTION_CAP, sizeof(*req));
+ be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_SET_DRIVER_FUNCTION_CAP, sizeof(*req), wrb, NULL);
req->valid_cap_flags = cpu_to_le32(CAPABILITY_SW_TIMESTAMPS |
CAPABILITY_BE3_NATIVE_ERX_API);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index d6a232a..2180497 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -229,27 +229,29 @@
struct be_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
int status = 0;
+ u8 current_mac[ETH_ALEN];
+ u32 pmac_id = adapter->pmac_id;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
- /* MAC addr configuration will be done in hardware for VFs
- * by their corresponding PFs. Just copy to netdev addr here
- */
- if (!be_physfn(adapter))
- goto netdev_addr;
-
- status = be_cmd_pmac_del(adapter, adapter->if_handle,
- adapter->pmac_id, 0);
+ status = be_cmd_mac_addr_query(adapter, current_mac,
+ MAC_ADDRESS_TYPE_NETWORK, false, adapter->if_handle);
if (status)
- return status;
+ goto err;
- status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data,
+ if (memcmp(addr->sa_data, current_mac, ETH_ALEN)) {
+ status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data,
adapter->if_handle, &adapter->pmac_id, 0);
-netdev_addr:
- if (!status)
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ if (status)
+ goto err;
+ be_cmd_pmac_del(adapter, adapter->if_handle, pmac_id, 0);
+ }
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ return 0;
+err:
+ dev_err(&adapter->pdev->dev, "MAC %pM set Failed\n", addr->sa_data);
return status;
}
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index 2be4698..ca1ae98 100644
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -85,7 +85,7 @@
config BVME6000_NET
tristate "BVME6000 Ethernet support"
- depends on BVME6000MVME16x
+ depends on BVME6000
---help---
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 1ad1f60..869a2c2 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -484,7 +484,7 @@
mlx4_mtt_cleanup(dev, &eq->mtt);
for (i = 0; i < npages; ++i)
- pci_free_consistent(dev->pdev, PAGE_SIZE,
+ dma_free_coherent(&dev->pdev->dev, PAGE_SIZE,
eq->page_list[i].buf,
eq->page_list[i].map);
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index ed452dd..abdfbac 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -205,6 +205,8 @@
#define QUERY_DEV_CAP_MAX_MCG_OFFSET 0x63
#define QUERY_DEV_CAP_RSVD_PD_OFFSET 0x64
#define QUERY_DEV_CAP_MAX_PD_OFFSET 0x65
+#define QUERY_DEV_CAP_RSVD_XRC_OFFSET 0x66
+#define QUERY_DEV_CAP_MAX_XRC_OFFSET 0x67
#define QUERY_DEV_CAP_MAX_COUNTERS_OFFSET 0x68
#define QUERY_DEV_CAP_RDMARC_ENTRY_SZ_OFFSET 0x80
#define QUERY_DEV_CAP_QPC_ENTRY_SZ_OFFSET 0x82
@@ -319,6 +321,10 @@
dev_cap->reserved_pds = field >> 4;
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_PD_OFFSET);
dev_cap->max_pds = 1 << (field & 0x3f);
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_XRC_OFFSET);
+ dev_cap->reserved_xrcds = field >> 4;
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_PD_OFFSET);
+ dev_cap->max_xrcds = 1 << (field & 0x1f);
MLX4_GET(size, outbox, QUERY_DEV_CAP_RDMARC_ENTRY_SZ_OFFSET);
dev_cap->rdmarc_entry_sz = size;
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.h b/drivers/net/ethernet/mellanox/mlx4/fw.h
index 1e8ecc3..bf5ec22 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.h
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.h
@@ -93,6 +93,8 @@
int max_mcgs;
int reserved_pds;
int max_pds;
+ int reserved_xrcds;
+ int max_xrcds;
int qpc_entry_sz;
int rdmarc_entry_sz;
int altc_entry_sz;
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index f0ee35d..94bbc85 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -96,6 +96,8 @@
static int log_num_vlan;
module_param_named(log_num_vlan, log_num_vlan, int, 0444);
MODULE_PARM_DESC(log_num_vlan, "Log2 max number of VLANs per ETH port (0-7)");
+/* Log2 max number of VLANs per ETH port (0-7) */
+#define MLX4_LOG_NUM_VLANS 7
static int use_prio;
module_param_named(use_prio, use_prio, bool, 0444);
@@ -220,6 +222,10 @@
dev->caps.reserved_mrws = dev_cap->reserved_mrws;
dev->caps.reserved_uars = dev_cap->reserved_uars;
dev->caps.reserved_pds = dev_cap->reserved_pds;
+ dev->caps.reserved_xrcds = (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) ?
+ dev_cap->reserved_xrcds : 0;
+ dev->caps.max_xrcds = (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) ?
+ dev_cap->max_xrcds : 0;
dev->caps.mtt_entry_sz = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz;
dev->caps.max_msg_sz = dev_cap->max_msg_sz;
dev->caps.page_size_cap = ~(u32) (dev_cap->min_page_sz - 1);
@@ -230,7 +236,7 @@
dev->caps.max_gso_sz = dev_cap->max_gso_sz;
dev->caps.log_num_macs = log_num_mac;
- dev->caps.log_num_vlans = log_num_vlan;
+ dev->caps.log_num_vlans = MLX4_LOG_NUM_VLANS;
dev->caps.log_num_prios = use_prio ? 3 : 0;
for (i = 1; i <= dev->caps.num_ports; ++i) {
@@ -912,11 +918,18 @@
goto err_kar_unmap;
}
+ err = mlx4_init_xrcd_table(dev);
+ if (err) {
+ mlx4_err(dev, "Failed to initialize "
+ "reliable connection domain table, aborting.\n");
+ goto err_pd_table_free;
+ }
+
err = mlx4_init_mr_table(dev);
if (err) {
mlx4_err(dev, "Failed to initialize "
"memory region table, aborting.\n");
- goto err_pd_table_free;
+ goto err_xrcd_table_free;
}
err = mlx4_init_eq_table(dev);
@@ -998,6 +1011,13 @@
"ib capabilities (%d). Continuing with "
"caps = 0\n", port, err);
dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
+
+ err = mlx4_check_ext_port_caps(dev, port);
+ if (err)
+ mlx4_warn(dev, "failed to get port %d extended "
+ "port capabilities support info (%d)."
+ " Assuming not supported\n", port, err);
+
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, aborting\n",
@@ -1033,6 +1053,9 @@
err_mr_table_free:
mlx4_cleanup_mr_table(dev);
+err_xrcd_table_free:
+ mlx4_cleanup_xrcd_table(dev);
+
err_pd_table_free:
mlx4_cleanup_pd_table(dev);
@@ -1355,6 +1378,7 @@
mlx4_cmd_use_polling(dev);
mlx4_cleanup_eq_table(dev);
mlx4_cleanup_mr_table(dev);
+ mlx4_cleanup_xrcd_table(dev);
mlx4_cleanup_pd_table(dev);
mlx4_cleanup_uar_table(dev);
@@ -1416,6 +1440,7 @@
mlx4_cmd_use_polling(dev);
mlx4_cleanup_eq_table(dev);
mlx4_cleanup_mr_table(dev);
+ mlx4_cleanup_xrcd_table(dev);
mlx4_cleanup_pd_table(dev);
iounmap(priv->kar);
@@ -1489,10 +1514,9 @@
return -1;
}
- if ((log_num_vlan < 0) || (log_num_vlan > 7)) {
- pr_warning("mlx4_core: bad num_vlan: %d\n", log_num_vlan);
- return -1;
- }
+ if (log_num_vlan != 0)
+ pr_warning("mlx4_core: log_num_vlan - obsolete module param, using %d\n",
+ MLX4_LOG_NUM_VLANS);
if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 7)) {
pr_warning("mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index a2fcd84..5dfa68f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -335,6 +335,7 @@
struct mlx4_cmd cmd;
struct mlx4_bitmap pd_bitmap;
+ struct mlx4_bitmap xrcd_bitmap;
struct mlx4_uar_table uar_table;
struct mlx4_mr_table mr_table;
struct mlx4_cq_table cq_table;
@@ -384,6 +385,7 @@
void mlx4_free_eq_table(struct mlx4_dev *dev);
int mlx4_init_pd_table(struct mlx4_dev *dev);
+int mlx4_init_xrcd_table(struct mlx4_dev *dev);
int mlx4_init_uar_table(struct mlx4_dev *dev);
int mlx4_init_mr_table(struct mlx4_dev *dev);
int mlx4_init_eq_table(struct mlx4_dev *dev);
@@ -393,6 +395,7 @@
int mlx4_init_mcg_table(struct mlx4_dev *dev);
void mlx4_cleanup_pd_table(struct mlx4_dev *dev);
+void mlx4_cleanup_xrcd_table(struct mlx4_dev *dev);
void mlx4_cleanup_uar_table(struct mlx4_dev *dev);
void mlx4_cleanup_mr_table(struct mlx4_dev *dev);
void mlx4_cleanup_eq_table(struct mlx4_dev *dev);
@@ -450,6 +453,7 @@
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port);
int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps);
+int mlx4_check_ext_port_caps(struct mlx4_dev *dev, u8 port);
int mlx4_qp_detach_common(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
enum mlx4_protocol prot, enum mlx4_steer_type steer);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index fca6616..8fda331c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -581,8 +581,9 @@
* printk / logging functions
*/
+__printf(3, 4)
int en_print(const char *level, const struct mlx4_en_priv *priv,
- const char *format, ...) __attribute__ ((format (printf, 3, 4)));
+ const char *format, ...);
#define en_dbg(mlevel, priv, format, arg...) \
do { \
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index 9c188bd..ab639cf 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -139,7 +139,7 @@
buddy->bits = kzalloc((buddy->max_order + 1) * sizeof (long *),
GFP_KERNEL);
- buddy->num_free = kzalloc((buddy->max_order + 1) * sizeof (int *),
+ buddy->num_free = kcalloc((buddy->max_order + 1), sizeof *buddy->num_free,
GFP_KERNEL);
if (!buddy->bits || !buddy->num_free)
goto err_out;
diff --git a/drivers/net/ethernet/mellanox/mlx4/pd.c b/drivers/net/ethernet/mellanox/mlx4/pd.c
index 1286b88..3736163 100644
--- a/drivers/net/ethernet/mellanox/mlx4/pd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/pd.c
@@ -61,6 +61,24 @@
}
EXPORT_SYMBOL_GPL(mlx4_pd_free);
+int mlx4_xrcd_alloc(struct mlx4_dev *dev, u32 *xrcdn)
+{
+ struct mlx4_priv *priv = mlx4_priv(dev);
+
+ *xrcdn = mlx4_bitmap_alloc(&priv->xrcd_bitmap);
+ if (*xrcdn == -1)
+ return -ENOMEM;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mlx4_xrcd_alloc);
+
+void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn)
+{
+ mlx4_bitmap_free(&mlx4_priv(dev)->xrcd_bitmap, xrcdn);
+}
+EXPORT_SYMBOL_GPL(mlx4_xrcd_free);
+
int mlx4_init_pd_table(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
@@ -74,6 +92,18 @@
mlx4_bitmap_cleanup(&mlx4_priv(dev)->pd_bitmap);
}
+int mlx4_init_xrcd_table(struct mlx4_dev *dev)
+{
+ struct mlx4_priv *priv = mlx4_priv(dev);
+
+ return mlx4_bitmap_init(&priv->xrcd_bitmap, (1 << 16),
+ (1 << 16) - 1, dev->caps.reserved_xrcds + 1, 0);
+}
+
+void mlx4_cleanup_xrcd_table(struct mlx4_dev *dev)
+{
+ mlx4_bitmap_cleanup(&mlx4_priv(dev)->xrcd_bitmap);
+}
int mlx4_uar_alloc(struct mlx4_dev *dev, struct mlx4_uar *uar)
{
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 163a314..a44f080 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -148,22 +148,26 @@
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER) {
err = mlx4_uc_steer_add(dev, port, mac, qpn, 1);
- if (!err) {
- entry = kmalloc(sizeof *entry, GFP_KERNEL);
- if (!entry) {
- mlx4_uc_steer_release(dev, port, mac, *qpn, 1);
- return -ENOMEM;
- }
- entry->mac = mac;
- err = radix_tree_insert(&info->mac_tree, *qpn, entry);
- if (err) {
- mlx4_uc_steer_release(dev, port, mac, *qpn, 1);
- return err;
- }
- } else
+ if (err)
return err;
+
+ entry = kmalloc(sizeof *entry, GFP_KERNEL);
+ if (!entry) {
+ mlx4_uc_steer_release(dev, port, mac, *qpn, 1);
+ return -ENOMEM;
+ }
+
+ entry->mac = mac;
+ err = radix_tree_insert(&info->mac_tree, *qpn, entry);
+ if (err) {
+ kfree(entry);
+ mlx4_uc_steer_release(dev, port, mac, *qpn, 1);
+ return err;
+ }
}
+
mlx4_dbg(dev, "Registering MAC: 0x%llx\n", (unsigned long long) mac);
+
mutex_lock(&table->mutex);
for (i = 0; i < MLX4_MAX_MAC_NUM - 1; i++) {
if (free < 0 && !table->refs[i]) {
@@ -465,6 +469,48 @@
return err;
}
+int mlx4_check_ext_port_caps(struct mlx4_dev *dev, u8 port)
+{
+ struct mlx4_cmd_mailbox *inmailbox, *outmailbox;
+ u8 *inbuf, *outbuf;
+ int err, packet_error;
+
+ inmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inmailbox))
+ return PTR_ERR(inmailbox);
+
+ outmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outmailbox)) {
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ return PTR_ERR(outmailbox);
+ }
+
+ inbuf = inmailbox->buf;
+ outbuf = outmailbox->buf;
+ memset(inbuf, 0, 256);
+ memset(outbuf, 0, 256);
+ inbuf[0] = 1;
+ inbuf[1] = 1;
+ inbuf[2] = 1;
+ inbuf[3] = 1;
+
+ *(__be16 *) (&inbuf[16]) = MLX4_ATTR_EXTENDED_PORT_INFO;
+ *(__be32 *) (&inbuf[20]) = cpu_to_be32(port);
+
+ err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C);
+
+ packet_error = be16_to_cpu(*(__be16 *) (outbuf + 4));
+
+ dev->caps.ext_port_cap[port] = (!err && !packet_error) ?
+ MLX_EXT_PORT_CAP_FLAG_EXTENDED_PORT_INFO
+ : 0;
+
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ mlx4_free_cmd_mailbox(dev, outmailbox);
+ return err;
+}
+
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
{
struct mlx4_cmd_mailbox *mailbox;
diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index ec9350e..51c5389 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -280,6 +280,9 @@
* We reserve 2 extra QPs per port for the special QPs. The
* block of special QPs must be aligned to a multiple of 8, so
* round up.
+ *
+ * We also reserve the MSB of the 24-bit QP number to indicate
+ * that a QP is an XRC QP.
*/
dev->caps.sqp_start =
ALIGN(dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], 8);
diff --git a/drivers/net/ethernet/mellanox/mlx4/srq.c b/drivers/net/ethernet/mellanox/mlx4/srq.c
index 3b07b80..a20b141 100644
--- a/drivers/net/ethernet/mellanox/mlx4/srq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/srq.c
@@ -40,20 +40,20 @@
struct mlx4_srq_context {
__be32 state_logsize_srqn;
u8 logstride;
- u8 reserved1[3];
- u8 pg_offset;
- u8 reserved2[3];
- u32 reserved3;
+ u8 reserved1;
+ __be16 xrcd;
+ __be32 pg_offset_cqn;
+ u32 reserved2;
u8 log_page_size;
- u8 reserved4[2];
+ u8 reserved3[2];
u8 mtt_base_addr_h;
__be32 mtt_base_addr_l;
__be32 pd;
__be16 limit_watermark;
__be16 wqe_cnt;
- u16 reserved5;
+ u16 reserved4;
__be16 wqe_counter;
- u32 reserved6;
+ u32 reserved5;
__be64 db_rec_addr;
};
@@ -109,8 +109,8 @@
MLX4_CMD_TIME_CLASS_A);
}
-int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, struct mlx4_mtt *mtt,
- u64 db_rec, struct mlx4_srq *srq)
+int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, u32 cqn, u16 xrcd,
+ struct mlx4_mtt *mtt, u64 db_rec, struct mlx4_srq *srq)
{
struct mlx4_srq_table *srq_table = &mlx4_priv(dev)->srq_table;
struct mlx4_cmd_mailbox *mailbox;
@@ -148,6 +148,8 @@
srq_context->state_logsize_srqn = cpu_to_be32((ilog2(srq->max) << 24) |
srq->srqn);
srq_context->logstride = srq->wqe_shift - 4;
+ srq_context->xrcd = cpu_to_be16(xrcd);
+ srq_context->pg_offset_cqn = cpu_to_be32(cqn & 0xffffff);
srq_context->log_page_size = mtt->page_shift - MLX4_ICM_PAGE_SHIFT;
mtt_addr = mlx4_mtt_addr(dev, mtt);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 2fd1ba8..7ed53db 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -36,8 +36,8 @@
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 24
-#define QLCNIC_LINUX_VERSIONID "5.0.24"
+#define _QLCNIC_LINUX_SUBVERSION 25
+#define QLCNIC_LINUX_VERSIONID "5.0.25"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\
(_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 5d8bec2..8aa1c6e 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -935,31 +935,49 @@
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
int max_sds_rings = adapter->max_sds_rings;
+ int err = -EIO, active = 1;
+
+ if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC) {
+ netdev_warn(dev, "LED test not supported for non "
+ "privilege function\n");
+ return -EOPNOTSUPP;
+ }
switch (state) {
case ETHTOOL_ID_ACTIVE:
if (test_and_set_bit(__QLCNIC_LED_ENABLE, &adapter->state))
return -EBUSY;
- if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
- if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
- return -EIO;
+ if (test_bit(__QLCNIC_RESETTING, &adapter->state))
+ break;
- if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST)) {
- clear_bit(__QLCNIC_RESETTING, &adapter->state);
- return -EIO;
- }
+ if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
+ if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST))
+ break;
set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
}
- if (adapter->nic_ops->config_led(adapter, 1, 0xf) == 0)
- return 0;
+ if (adapter->nic_ops->config_led(adapter, 1, 0xf) == 0) {
+ err = 0;
+ break;
+ }
dev_err(&adapter->pdev->dev,
"Failed to set LED blink state.\n");
break;
case ETHTOOL_ID_INACTIVE:
+ active = 0;
+
+ if (test_bit(__QLCNIC_RESETTING, &adapter->state))
+ break;
+
+ if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
+ if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST))
+ break;
+ set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
+ }
+
if (adapter->nic_ops->config_led(adapter, 0, 0xf))
dev_err(&adapter->pdev->dev,
"Failed to reset LED blink state.\n");
@@ -970,14 +988,13 @@
return -EINVAL;
}
- if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state)) {
+ if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state))
qlcnic_diag_free_res(dev, max_sds_rings);
- clear_bit(__QLCNIC_RESETTING, &adapter->state);
- }
- clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
+ if (!active || err)
+ clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
- return -EIO;
+ return err;
}
static void
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
index 92bc8ce..a528193 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
@@ -407,7 +407,9 @@
#define QLCNIC_CRB_SRE QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_SRE)
#define QLCNIC_CRB_ROMUSB \
QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_ROMUSB)
+#define QLCNIC_CRB_EPG QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_EG)
#define QLCNIC_CRB_I2Q QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_I2Q)
+#define QLCNIC_CRB_TIMER QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_TIMR)
#define QLCNIC_CRB_I2C0 QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_I2C0)
#define QLCNIC_CRB_SMB QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_SMB)
#define QLCNIC_CRB_MAX QLCNIC_PCI_CRB_WINDOW(64)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 74e9d7b..bcb81e4 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -566,7 +566,7 @@
return -EIO;
if (qlcnic_nic_set_promisc(adapter, VPORT_MISS_MODE_ACCEPT_ALL)) {
- qlcnic_set_fw_loopback(adapter, mode);
+ qlcnic_set_fw_loopback(adapter, 0);
return -EIO;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index 312c1c3..3866958 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -422,9 +422,53 @@
QLCWR32(adapter, CRB_CMDPEG_STATE, 0);
QLCWR32(adapter, CRB_RCVPEG_STATE, 0);
- qlcnic_rom_lock(adapter);
- QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0xfeffffff);
+ /* Halt all the indiviual PEGs and other blocks */
+ /* disable all I2Q */
+ QLCWR32(adapter, QLCNIC_CRB_I2Q + 0x10, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_I2Q + 0x14, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_I2Q + 0x18, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_I2Q + 0x1c, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_I2Q + 0x20, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_I2Q + 0x24, 0x0);
+
+ /* disable all niu interrupts */
+ QLCWR32(adapter, QLCNIC_CRB_NIU + 0x40, 0xff);
+ /* disable xge rx/tx */
+ QLCWR32(adapter, QLCNIC_CRB_NIU + 0x70000, 0x00);
+ /* disable xg1 rx/tx */
+ QLCWR32(adapter, QLCNIC_CRB_NIU + 0x80000, 0x00);
+ /* disable sideband mac */
+ QLCWR32(adapter, QLCNIC_CRB_NIU + 0x90000, 0x00);
+ /* disable ap0 mac */
+ QLCWR32(adapter, QLCNIC_CRB_NIU + 0xa0000, 0x00);
+ /* disable ap1 mac */
+ QLCWR32(adapter, QLCNIC_CRB_NIU + 0xb0000, 0x00);
+
+ /* halt sre */
+ val = QLCRD32(adapter, QLCNIC_CRB_SRE + 0x1000);
+ QLCWR32(adapter, QLCNIC_CRB_SRE + 0x1000, val & (~(0x1)));
+
+ /* halt epg */
+ QLCWR32(adapter, QLCNIC_CRB_EPG + 0x1300, 0x1);
+
+ /* halt timers */
+ QLCWR32(adapter, QLCNIC_CRB_TIMER + 0x0, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_TIMER + 0x8, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_TIMER + 0x10, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_TIMER + 0x18, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_TIMER + 0x100, 0x0);
+ QLCWR32(adapter, QLCNIC_CRB_TIMER + 0x200, 0x0);
+ /* halt pegs */
+ QLCWR32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x3c, 1);
+ QLCWR32(adapter, QLCNIC_CRB_PEG_NET_1 + 0x3c, 1);
+ QLCWR32(adapter, QLCNIC_CRB_PEG_NET_2 + 0x3c, 1);
+ QLCWR32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x3c, 1);
+ QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c, 1);
+ msleep(20);
+
qlcnic_rom_unlock(adapter);
+ /* big hammer don't reset CAM block on reset */
+ QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0xfeffffff);
/* Init HW CRB block */
if (qlcnic_rom_fast_read(adapter, 0, &n) != 0 || (n != 0xcafecafe) ||
@@ -522,8 +566,10 @@
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x8, 0);
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0xc, 0);
msleep(1);
+
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);
+
return 0;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 106503f..0bd1638 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2840,8 +2840,15 @@
goto wait_npar;
}
+ if (dev_state == QLCNIC_DEV_INITIALIZING ||
+ dev_state == QLCNIC_DEV_READY) {
+ dev_info(&adapter->pdev->dev, "Detected state change from "
+ "DEV_NEED_RESET, skipping ack check\n");
+ goto skip_ack_check;
+ }
+
if (adapter->fw_wait_cnt++ > adapter->reset_ack_timeo) {
- dev_err(&adapter->pdev->dev, "Reset:Failed to get ack %d sec\n",
+ dev_info(&adapter->pdev->dev, "Reset:Failed to get ack %d sec\n",
adapter->reset_ack_timeo);
goto skip_ack_check;
}
@@ -3497,11 +3504,16 @@
{
struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
int max_sds_rings = adapter->max_sds_rings;
- int dev_down = 0;
u16 beacon;
u8 b_state, b_rate;
int err;
+ if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC) {
+ dev_warn(dev, "LED test not supported for non "
+ "privilege function\n");
+ return -EOPNOTSUPP;
+ }
+
if (len != sizeof(u16))
return QL_STATUS_INVALID_PARAM;
@@ -3513,36 +3525,40 @@
if (adapter->ahw->beacon_state == b_state)
return len;
+ rtnl_lock();
+
if (!adapter->ahw->beacon_state)
- if (test_and_set_bit(__QLCNIC_LED_ENABLE, &adapter->state))
+ if (test_and_set_bit(__QLCNIC_LED_ENABLE, &adapter->state)) {
+ rtnl_unlock();
return -EBUSY;
+ }
+
+ if (test_bit(__QLCNIC_RESETTING, &adapter->state)) {
+ err = -EIO;
+ goto out;
+ }
if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
- if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
- return -EIO;
err = qlcnic_diag_alloc_res(adapter->netdev, QLCNIC_LED_TEST);
- if (err) {
- clear_bit(__QLCNIC_RESETTING, &adapter->state);
- clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
- return err;
- }
- dev_down = 1;
+ if (err)
+ goto out;
+ set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
}
err = qlcnic_config_led(adapter, b_state, b_rate);
if (!err) {
- adapter->ahw->beacon_state = b_state;
err = len;
+ adapter->ahw->beacon_state = b_state;
}
- if (dev_down) {
+ if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state))
qlcnic_diag_free_res(adapter->netdev, max_sds_rings);
- clear_bit(__QLCNIC_RESETTING, &adapter->state);
- }
- if (!b_state)
+ out:
+ if (!adapter->ahw->beacon_state)
clear_bit(__QLCNIC_LED_ENABLE, &adapter->state);
+ rtnl_unlock();
return err;
}
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index de9afeb..d5731f1 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -2229,13 +2229,15 @@
/* PCI device ID table */
static DEFINE_PCI_DEVICE_TABLE(efx_pci_table) = {
- {PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID),
+ {PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0),
.driver_data = (unsigned long) &falcon_a1_nic_type},
- {PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID),
+ {PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000B),
.driver_data = (unsigned long) &falcon_b0_nic_type},
- {PCI_DEVICE(EFX_VENDID_SFC, BETHPAGE_A_P_DEVID),
+ {PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, BETHPAGE_A_P_DEVID),
.driver_data = (unsigned long) &siena_a0_nic_type},
- {PCI_DEVICE(EFX_VENDID_SFC, SIENA_A_P_DEVID),
+ {PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, SIENA_A_P_DEVID),
.driver_data = (unsigned long) &siena_a0_nic_type},
{0} /* end of list */
};
diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h
index 442f4d0..4764793 100644
--- a/drivers/net/ethernet/sfc/efx.h
+++ b/drivers/net/ethernet/sfc/efx.h
@@ -15,10 +15,6 @@
#include "filter.h"
/* PCI IDs */
-#define EFX_VENDID_SFC 0x1924
-#define FALCON_A_P_DEVID 0x0703
-#define FALCON_A_S_DEVID 0x6703
-#define FALCON_B_P_DEVID 0x0710
#define BETHPAGE_A_P_DEVID 0x0803
#define SIENA_A_P_DEVID 0x0813
diff --git a/drivers/net/ethernet/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 4dd1748..97b606b 100644
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -1426,7 +1426,8 @@
}
dev = pci_dev_get(efx->pci_dev);
- while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID,
+ while ((dev = pci_get_device(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1,
dev))) {
if (dev->bus == efx->pci_dev->bus &&
dev->devfn == efx->pci_dev->devfn + 1) {
diff --git a/drivers/net/ethernet/sfc/falcon_boards.c b/drivers/net/ethernet/sfc/falcon_boards.c
index b9cc846..6cc16b8 100644
--- a/drivers/net/ethernet/sfc/falcon_boards.c
+++ b/drivers/net/ethernet/sfc/falcon_boards.c
@@ -764,7 +764,8 @@
if (board->type) {
netif_info(efx, probe, efx->net_dev, "board is %s rev %c%d\n",
- (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
+ (efx->pci_dev->subsystem_vendor ==
+ PCI_VENDOR_ID_SOLARFLARE)
? board->type->ref_model : board->type->gen_type,
'A' + board->major, board->minor);
return 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 9100c10..2cc1192 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -49,7 +49,7 @@
unsigned long tx_underflow ____cacheline_aligned;
unsigned long tx_carrier;
unsigned long tx_losscarrier;
- unsigned long tx_heartbeat;
+ unsigned long vlan_tag;
unsigned long tx_deferred;
unsigned long tx_vlan;
unsigned long tx_jabber;
@@ -58,9 +58,9 @@
unsigned long tx_ip_header_error;
/* Receive errors */
unsigned long rx_desc;
- unsigned long rx_partial;
- unsigned long rx_runt;
- unsigned long rx_toolong;
+ unsigned long sa_filter_fail;
+ unsigned long overflow_error;
+ unsigned long ipc_csum_error;
unsigned long rx_collision;
unsigned long rx_crc;
unsigned long rx_length;
diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h
index 63a03e2..9820ec8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
@@ -25,33 +25,34 @@
union {
struct {
/* RDES0 */
- u32 reserved1:1;
+ u32 payload_csum_error:1;
u32 crc_error:1;
u32 dribbling:1;
u32 mii_error:1;
u32 receive_watchdog:1;
u32 frame_type:1;
u32 collision:1;
- u32 frame_too_long:1;
+ u32 ipc_csum_error:1;
u32 last_descriptor:1;
u32 first_descriptor:1;
- u32 multicast_frame:1;
- u32 run_frame:1;
+ u32 vlan_tag:1;
+ u32 overflow_error:1;
u32 length_error:1;
- u32 partial_frame_error:1;
+ u32 sa_filter_fail:1;
u32 descriptor_error:1;
u32 error_summary:1;
u32 frame_length:14;
- u32 filtering_fail:1;
+ u32 da_filter_fail:1;
u32 own:1;
/* RDES1 */
u32 buffer1_size:11;
u32 buffer2_size:11;
- u32 reserved2:2;
+ u32 reserved1:2;
u32 second_address_chained:1;
u32 end_ring:1;
- u32 reserved3:5;
+ u32 reserved2:5;
u32 disable_ic:1;
+
} rx;
struct {
/* RDES0 */
@@ -91,24 +92,28 @@
u32 underflow_error:1;
u32 excessive_deferral:1;
u32 collision_count:4;
- u32 heartbeat_fail:1;
+ u32 vlan_frame:1;
u32 excessive_collisions:1;
u32 late_collision:1;
u32 no_carrier:1;
u32 loss_carrier:1;
- u32 reserved1:3;
+ u32 payload_error:1;
+ u32 frame_flushed:1;
+ u32 jabber_timeout:1;
u32 error_summary:1;
- u32 reserved2:15;
+ u32 ip_header_error:1;
+ u32 time_stamp_status:1;
+ u32 reserved1:13;
u32 own:1;
/* TDES1 */
u32 buffer1_size:11;
u32 buffer2_size:11;
- u32 reserved3:1;
+ u32 time_stamp_enable:1;
u32 disable_padding:1;
u32 second_address_chained:1;
u32 end_ring:1;
u32 crc_disable:1;
- u32 reserved4:2;
+ u32 checksum_insertion:2;
u32 first_segment:1;
u32 last_segment:1;
u32 interrupt:1;
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index f7e8ba7..fda5d2b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -50,11 +50,12 @@
stats->collisions += p->des01.tx.collision_count;
ret = -1;
}
- if (unlikely(p->des01.tx.heartbeat_fail)) {
- x->tx_heartbeat++;
- stats->tx_heartbeat_errors++;
- ret = -1;
+
+ if (p->des01.etx.vlan_frame) {
+ CHIP_DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
+ x->tx_vlan++;
}
+
if (unlikely(p->des01.tx.deferred))
x->tx_deferred++;
@@ -68,12 +69,12 @@
/* This function verifies if each incoming frame has some errors
* and, if required, updates the multicast statistics.
- * In case of success, it returns csum_none because the device
- * is not able to compute the csum in HW. */
+ * In case of success, it returns good_frame because the GMAC device
+ * is supposed to be able to compute the csum in HW. */
static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
struct dma_desc *p)
{
- int ret = csum_none;
+ int ret = good_frame;
struct net_device_stats *stats = (struct net_device_stats *)data;
if (unlikely(p->des01.rx.last_descriptor == 0)) {
@@ -86,12 +87,12 @@
if (unlikely(p->des01.rx.error_summary)) {
if (unlikely(p->des01.rx.descriptor_error))
x->rx_desc++;
- if (unlikely(p->des01.rx.partial_frame_error))
- x->rx_partial++;
- if (unlikely(p->des01.rx.run_frame))
- x->rx_runt++;
- if (unlikely(p->des01.rx.frame_too_long))
- x->rx_toolong++;
+ if (unlikely(p->des01.rx.sa_filter_fail))
+ x->sa_filter_fail++;
+ if (unlikely(p->des01.rx.overflow_error))
+ x->overflow_error++;
+ if (unlikely(p->des01.rx.ipc_csum_error))
+ x->ipc_csum_error++;
if (unlikely(p->des01.rx.collision)) {
x->rx_collision++;
stats->collisions++;
@@ -113,10 +114,10 @@
x->rx_mii++;
ret = discard_frame;
}
- if (p->des01.rx.multicast_frame) {
- x->rx_multicast++;
- stats->multicast++;
- }
+#ifdef STMMAC_VLAN_TAG_USED
+ if (p->des01.rx.vlan_tag)
+ x->vlan_tag++;
+#endif
return ret;
}
@@ -184,6 +185,9 @@
{
p->des01.tx.first_segment = is_fs;
norm_set_tx_desc_len(p, len);
+
+ if (likely(csum_flag))
+ p->des01.tx.checksum_insertion = cic_full;
}
static void ndesc_clear_tx_ic(struct dma_desc *p)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 406404f..e8eff09 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -50,7 +50,7 @@
STMMAC_STAT(tx_underflow),
STMMAC_STAT(tx_carrier),
STMMAC_STAT(tx_losscarrier),
- STMMAC_STAT(tx_heartbeat),
+ STMMAC_STAT(vlan_tag),
STMMAC_STAT(tx_deferred),
STMMAC_STAT(tx_vlan),
STMMAC_STAT(rx_vlan),
@@ -59,9 +59,9 @@
STMMAC_STAT(tx_payload_error),
STMMAC_STAT(tx_ip_header_error),
STMMAC_STAT(rx_desc),
- STMMAC_STAT(rx_partial),
- STMMAC_STAT(rx_runt),
- STMMAC_STAT(rx_toolong),
+ STMMAC_STAT(sa_filter_fail),
+ STMMAC_STAT(overflow_error),
+ STMMAC_STAT(ipc_csum_error),
STMMAC_STAT(rx_collision),
STMMAC_STAT(rx_crc),
STMMAC_STAT(rx_length),
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index aeaa15b..20546bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -325,7 +325,7 @@
(interface == PHY_INTERFACE_MODE_RMII))) {
phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
- priv->phydev->advertising = priv->phydev->supported;
+ phydev->advertising = phydev->supported;
}
/*
@@ -812,9 +812,11 @@
*/
static int stmmac_get_hw_features(struct stmmac_priv *priv)
{
- u32 hw_cap = priv->hw->dma->get_hw_feature(priv->ioaddr);
+ u32 hw_cap = 0;
- if (likely(hw_cap)) {
+ if (priv->hw->dma->get_hw_feature) {
+ hw_cap = priv->hw->dma->get_hw_feature(priv->ioaddr);
+
priv->dma_cap.mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
priv->dma_cap.mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
priv->dma_cap.half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
@@ -937,6 +939,7 @@
stmmac_get_hw_features(priv);
+ priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
if (priv->rx_coe)
pr_info("stmmac: Rx Checksum Offload Engine supported\n");
if (priv->plat->tx_coe)
@@ -1274,8 +1277,8 @@
#endif
skb->protocol = eth_type_trans(skb, priv->dev);
- if (unlikely(status == csum_none)) {
- /* always for the old mac 10/100 */
+ if (unlikely(!priv->rx_coe)) {
+ /* No RX COE for old mac10/100 devices */
skb_checksum_none_assert(skb);
netif_receive_skb(skb);
} else {
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 3bb1311..7145714 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -88,8 +88,8 @@
#define dev_rionet_capable(dev) \
is_rionet_capable(dev->src_ops, dev->dst_ops)
-#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001)
-#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4))
+#define RIONET_MAC_MATCH(x) (!memcmp((x), "\00\01\00\01", 4))
+#define RIONET_GET_DESTID(x) ((*((u8 *)x + 4) << 8) | *((u8 *)x + 5))
static int rionet_rx_clean(struct net_device *ndev)
{
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 91039ab..6ee8410 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -925,12 +925,10 @@
{
u16 v;
- if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS))
- return;
-
- vi->vdev->config->get(vi->vdev,
+ if (virtio_config_val(vi->vdev, VIRTIO_NET_F_STATUS,
offsetof(struct virtio_net_config, status),
- &v, sizeof(v));
+ &v) < 0)
+ return;
/* Ignore unknown (future) status bits */
v &= VIRTIO_NET_S_LINK_UP;
@@ -1006,11 +1004,9 @@
}
/* Configuration may specify what MAC to use. Otherwise random. */
- if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
- vdev->config->get(vdev,
+ if (virtio_config_val_len(vdev, VIRTIO_NET_F_MAC,
offsetof(struct virtio_net_config, mac),
- dev->dev_addr, dev->addr_len);
- } else
+ dev->dev_addr, dev->addr_len) < 0)
random_ether_addr(dev->dev_addr);
/* Set up our device-specific information */
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 39322d4..4045e5a 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -517,7 +517,7 @@
goto exit;
while (len--) {
- obuf = pack_hex_byte(obuf, *ibuf++);
+ obuf = hex_byte_pack(obuf, *ibuf++);
*obuf++ = '-';
}
obuf--;
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 0735488..0960224 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,6 +1,6 @@
menuconfig ATH_COMMON
tristate "Atheros Wireless Cards"
- depends on CFG80211
+ depends on CFG80211 && (!UML || BROKEN)
---help---
This will enable the support for the Atheros wireless drivers.
ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 908fdbc..0f9ee46c 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -173,8 +173,7 @@
void ath_hw_cycle_counters_update(struct ath_common *common);
int32_t ath_hw_get_listen_time(struct ath_common *common);
-extern __attribute__((format (printf, 2, 3)))
-void ath_printk(const char *level, const char *fmt, ...);
+extern __printf(2, 3) void ath_printk(const char *level, const char *fmt, ...);
#define _ath_printk(level, common, fmt, ...) \
do { \
@@ -258,7 +257,7 @@
#else
-static inline __attribute__((format (printf, 3, 4)))
+static inline __attribute__ ((format (printf, 3, 4)))
void ath_dbg(struct ath_common *common, enum ATH_DEBUG dbg_mask,
const char *fmt, ...)
{
diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
index 7f37df3..0a3f916 100644
--- a/drivers/net/wireless/ath/ath5k/debug.h
+++ b/drivers/net/wireless/ath/ath5k/debug.h
@@ -141,10 +141,10 @@
#include <linux/compiler.h>
-static inline void __attribute__ ((format (printf, 3, 4)))
+static inline __printf(3, 4) void
ATH5K_DBG(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...) {}
-static inline void __attribute__ ((format (printf, 3, 4)))
+static inline __printf(3, 4) void
ATH5K_DBG_UNLIMIT(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...)
{}
diff --git a/drivers/net/wireless/ath/ath6kl/debug.h b/drivers/net/wireless/ath/ath6kl/debug.h
index 9288a3c..7b7675f 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.h
+++ b/drivers/net/wireless/ath/ath6kl/debug.h
@@ -44,8 +44,8 @@
};
extern unsigned int debug_mask;
-extern int ath6kl_printk(const char *level, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+int ath6kl_printk(const char *level, const char *fmt, ...);
#define ath6kl_info(fmt, ...) \
ath6kl_printk(KERN_INFO, fmt, ##__VA_ARGS__)
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 447a230..37110df 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -1011,14 +1011,10 @@
}
/* Message printing */
-void b43info(struct b43_wl *wl, const char *fmt, ...)
- __attribute__ ((format(printf, 2, 3)));
-void b43err(struct b43_wl *wl, const char *fmt, ...)
- __attribute__ ((format(printf, 2, 3)));
-void b43warn(struct b43_wl *wl, const char *fmt, ...)
- __attribute__ ((format(printf, 2, 3)));
-void b43dbg(struct b43_wl *wl, const char *fmt, ...)
- __attribute__ ((format(printf, 2, 3)));
+__printf(2, 3) void b43info(struct b43_wl *wl, const char *fmt, ...);
+__printf(2, 3) void b43err(struct b43_wl *wl, const char *fmt, ...);
+__printf(2, 3) void b43warn(struct b43_wl *wl, const char *fmt, ...);
+__printf(2, 3) void b43dbg(struct b43_wl *wl, const char *fmt, ...);
/* A WARN_ON variant that vanishes when b43 debugging is disabled.
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 12b5182..1d4fc9d 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -810,15 +810,15 @@
/* Message printing */
-void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...)
- __attribute__((format(printf, 2, 3)));
-void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...)
- __attribute__((format(printf, 2, 3)));
-void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...)
- __attribute__((format(printf, 2, 3)));
+__printf(2, 3)
+void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...);
+__printf(2, 3)
+void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...);
+__printf(2, 3)
+void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...);
#if B43legacy_DEBUG
-void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...)
- __attribute__((format(printf, 2, 3)));
+__printf(2, 3)
+void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...);
#else /* DEBUG */
# define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0)
#endif /* DEBUG */
diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index 45e1476..d6c42e6 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -12,7 +12,7 @@
config RTL8192SE
tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
- depends on MAC80211 && EXPERIMENTAL
+ depends on MAC80211 && EXPERIMENTAL && PCI
select FW_LOADER
select RTLWIFI
---help---
@@ -23,7 +23,7 @@
config RTL8192DE
tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
- depends on MAC80211 && EXPERIMENTAL
+ depends on MAC80211 && EXPERIMENTAL && PCI
select FW_LOADER
select RTLWIFI
---help---
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 3ff22e3..9b6588e 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -17,14 +17,39 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/ctype.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
+/**
+ * struct alias_prop - Alias property in 'aliases' node
+ * @link: List node to link the structure in aliases_lookup list
+ * @alias: Alias property name
+ * @np: Pointer to device_node that the alias stands for
+ * @id: Index value from end of alias name
+ * @stem: Alias string without the index
+ *
+ * The structure represents one alias property of 'aliases' node as
+ * an entry in aliases_lookup list.
+ */
+struct alias_prop {
+ struct list_head link;
+ const char *alias;
+ struct device_node *np;
+ int id;
+ char stem[0];
+};
+
+static LIST_HEAD(aliases_lookup);
+
struct device_node *allnodes;
struct device_node *of_chosen;
+struct device_node *of_aliases;
+
+static DEFINE_MUTEX(of_aliases_mutex);
/* use when traversing tree through the allnext, child, sibling,
* or parent members of struct device_node.
@@ -632,6 +657,35 @@
EXPORT_SYMBOL_GPL(of_property_read_u32_array);
/**
+ * of_property_read_u64 - Find and read a 64 bit integer from a property
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_value: pointer to return value, modified only if return value is 0.
+ *
+ * Search for a property in a device node and read a 64-bit value from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u64 value can be decoded.
+ */
+int of_property_read_u64(const struct device_node *np, const char *propname,
+ u64 *out_value)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (sizeof(*out_value) > prop->length)
+ return -EOVERFLOW;
+ *out_value = of_read_number(prop->value, 2);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u64);
+
+/**
* of_property_read_string - Find and read a string from a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
@@ -662,6 +716,90 @@
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
+ * of_property_read_string_index - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string_index(struct device_node *np, const char *propname,
+ int index, const char **output)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if ((*p != 0) && (i++ == index)) {
+ *output = p;
+ return 0;
+ }
+ }
+ return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string_index);
+
+
+/**
+ * of_property_count_strings - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+int of_property_count_strings(struct device_node *np, const char *propname)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if (*p != 0)
+ i++;
+ }
+ return i;
+}
+EXPORT_SYMBOL_GPL(of_property_count_strings);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
@@ -988,3 +1126,99 @@
}
#endif /* defined(CONFIG_OF_DYNAMIC) */
+static void of_alias_add(struct alias_prop *ap, struct device_node *np,
+ int id, const char *stem, int stem_len)
+{
+ ap->np = np;
+ ap->id = id;
+ strncpy(ap->stem, stem, stem_len);
+ ap->stem[stem_len] = 0;
+ list_add_tail(&ap->link, &aliases_lookup);
+ pr_debug("adding DT alias:%s: stem=%s id=%i node=%s\n",
+ ap->alias, ap->stem, ap->id, np ? np->full_name : NULL);
+}
+
+/**
+ * of_alias_scan - Scan all properties of 'aliases' node
+ *
+ * The function scans all the properties of 'aliases' node and populate
+ * the the global lookup table with the properties. It returns the
+ * number of alias_prop found, or error code in error case.
+ *
+ * @dt_alloc: An allocator that provides a virtual address to memory
+ * for the resulting tree
+ */
+void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align))
+{
+ struct property *pp;
+
+ of_chosen = of_find_node_by_path("/chosen");
+ if (of_chosen == NULL)
+ of_chosen = of_find_node_by_path("/chosen@0");
+ of_aliases = of_find_node_by_path("/aliases");
+ if (!of_aliases)
+ return;
+
+ for_each_property(pp, of_aliases->properties) {
+ const char *start = pp->name;
+ const char *end = start + strlen(start);
+ struct device_node *np;
+ struct alias_prop *ap;
+ int id, len;
+
+ /* Skip those we do not want to proceed */
+ if (!strcmp(pp->name, "name") ||
+ !strcmp(pp->name, "phandle") ||
+ !strcmp(pp->name, "linux,phandle"))
+ continue;
+
+ np = of_find_node_by_path(pp->value);
+ if (!np)
+ continue;
+
+ /* walk the alias backwards to extract the id and work out
+ * the 'stem' string */
+ while (isdigit(*(end-1)) && end > start)
+ end--;
+ len = end - start;
+
+ if (kstrtoint(end, 10, &id) < 0)
+ continue;
+
+ /* Allocate an alias_prop with enough space for the stem */
+ ap = dt_alloc(sizeof(*ap) + len + 1, 4);
+ if (!ap)
+ continue;
+ ap->alias = start;
+ of_alias_add(ap, np, id, start, len);
+ }
+}
+
+/**
+ * of_alias_get_id - Get alias id for the given device_node
+ * @np: Pointer to the given device_node
+ * @stem: Alias stem of the given device_node
+ *
+ * The function travels the lookup table to get alias id for the given
+ * device_node and alias stem. It returns the alias id if find it.
+ */
+int of_alias_get_id(struct device_node *np, const char *stem)
+{
+ struct alias_prop *app;
+ int id = -ENODEV;
+
+ mutex_lock(&of_aliases_mutex);
+ list_for_each_entry(app, &aliases_lookup, link) {
+ if (strcmp(app->stem, stem) != 0)
+ continue;
+
+ if (np == app->np) {
+ id = app->id;
+ break;
+ }
+ }
+ mutex_unlock(&of_aliases_mutex);
+
+ return id;
+}
+EXPORT_SYMBOL_GPL(of_alias_get_id);
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 65200af..aeec35b 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -707,10 +707,8 @@
__unflatten_device_tree(initial_boot_params, &allnodes,
early_init_dt_alloc_memory_arch);
- /* Get pointer to OF "/chosen" node for use everywhere */
- of_chosen = of_find_node_by_path("/chosen");
- if (of_chosen == NULL)
- of_chosen = of_find_node_by_path("/chosen@0");
+ /* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
+ of_alias_scan(early_init_dt_alloc_memory_arch);
}
#endif /* CONFIG_OF_EARLY_FLATTREE */
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 9f689f1d..6d3dd39 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -19,10 +19,12 @@
*/
#include <linux/errno.h>
+#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/string.h>
+#include <linux/slab.h>
/* For archs that don't support NO_IRQ (such as x86), provide a dummy value */
#ifndef NO_IRQ
@@ -58,27 +60,27 @@
*/
struct device_node *of_irq_find_parent(struct device_node *child)
{
- struct device_node *p;
+ struct device_node *p, *c = child;
const __be32 *parp;
- if (!of_node_get(child))
+ if (!of_node_get(c))
return NULL;
do {
- parp = of_get_property(child, "interrupt-parent", NULL);
+ parp = of_get_property(c, "interrupt-parent", NULL);
if (parp == NULL)
- p = of_get_parent(child);
+ p = of_get_parent(c);
else {
if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
p = of_node_get(of_irq_dflt_pic);
else
p = of_find_node_by_phandle(be32_to_cpup(parp));
}
- of_node_put(child);
- child = p;
+ of_node_put(c);
+ c = p;
} while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
- return p;
+ return (p == child) ? NULL : p;
}
/**
@@ -386,3 +388,108 @@
return i;
}
+
+struct intc_desc {
+ struct list_head list;
+ struct device_node *dev;
+ struct device_node *interrupt_parent;
+};
+
+/**
+ * of_irq_init - Scan and init matching interrupt controllers in DT
+ * @matches: 0 terminated array of nodes to match and init function to call
+ *
+ * This function scans the device tree for matching interrupt controller nodes,
+ * and calls their initialization functions in order with parents first.
+ */
+void __init of_irq_init(const struct of_device_id *matches)
+{
+ struct device_node *np, *parent = NULL;
+ struct intc_desc *desc, *temp_desc;
+ struct list_head intc_desc_list, intc_parent_list;
+
+ INIT_LIST_HEAD(&intc_desc_list);
+ INIT_LIST_HEAD(&intc_parent_list);
+
+ for_each_matching_node(np, matches) {
+ if (!of_find_property(np, "interrupt-controller", NULL))
+ continue;
+ /*
+ * Here, we allocate and populate an intc_desc with the node
+ * pointer, interrupt-parent device_node etc.
+ */
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (WARN_ON(!desc))
+ goto err;
+
+ desc->dev = np;
+ desc->interrupt_parent = of_irq_find_parent(np);
+ list_add_tail(&desc->list, &intc_desc_list);
+ }
+
+ /*
+ * The root irq controller is the one without an interrupt-parent.
+ * That one goes first, followed by the controllers that reference it,
+ * followed by the ones that reference the 2nd level controllers, etc.
+ */
+ while (!list_empty(&intc_desc_list)) {
+ /*
+ * Process all controllers with the current 'parent'.
+ * First pass will be looking for NULL as the parent.
+ * The assumption is that NULL parent means a root controller.
+ */
+ list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
+ const struct of_device_id *match;
+ int ret;
+ of_irq_init_cb_t irq_init_cb;
+
+ if (desc->interrupt_parent != parent)
+ continue;
+
+ list_del(&desc->list);
+ match = of_match_node(matches, desc->dev);
+ if (WARN(!match->data,
+ "of_irq_init: no init function for %s\n",
+ match->compatible)) {
+ kfree(desc);
+ continue;
+ }
+
+ pr_debug("of_irq_init: init %s @ %p, parent %p\n",
+ match->compatible,
+ desc->dev, desc->interrupt_parent);
+ irq_init_cb = match->data;
+ ret = irq_init_cb(desc->dev, desc->interrupt_parent);
+ if (ret) {
+ kfree(desc);
+ continue;
+ }
+
+ /*
+ * This one is now set up; add it to the parent list so
+ * its children can get processed in a subsequent pass.
+ */
+ list_add_tail(&desc->list, &intc_parent_list);
+ }
+
+ /* Get the next pending parent that might have children */
+ desc = list_first_entry(&intc_parent_list, typeof(*desc), list);
+ if (list_empty(&intc_parent_list) || !desc) {
+ pr_err("of_irq_init: children remain, but no parents\n");
+ break;
+ }
+ list_del(&desc->list);
+ parent = desc->dev;
+ kfree(desc);
+ }
+
+ list_for_each_entry_safe(desc, temp_desc, &intc_parent_list, list) {
+ list_del(&desc->list);
+ kfree(desc);
+ }
+err:
+ list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
+ list_del(&desc->list);
+ kfree(desc);
+ }
+}
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index d35e300..980c079 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -83,7 +83,6 @@
addr);
continue;
}
- phy_scan_fixups(phy);
/* Associate the OF node with the device structure so it
* can be looked up later */
diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c
index 4d87b5d..bc5b399 100644
--- a/drivers/of/pdt.c
+++ b/drivers/of/pdt.c
@@ -229,6 +229,11 @@
return ret;
}
+static void *kernel_tree_alloc(u64 size, u64 align)
+{
+ return prom_early_alloc(size);
+}
+
void __init of_pdt_build_devicetree(phandle root_node, struct of_pdt_ops *ops)
{
struct device_node **nextp;
@@ -245,4 +250,7 @@
nextp = &allnodes->allnext;
allnodes->child = of_pdt_build_tree(allnodes,
of_pdt_prom_ops->getchild(allnodes->phandle), &nextp);
+
+ /* Get pointer to "/chosen" and "/aliasas" nodes for use everywhere */
+ of_alias_scan(kernel_tree_alloc);
}
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 0fa466a..cec6606 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -71,9 +71,13 @@
If unsure say Y.
+config PCI_ATS
+ bool
+
config PCI_IOV
bool "PCI IOV support"
depends on PCI
+ select PCI_ATS
help
I/O Virtualization is a PCI feature supported by some devices
which allows them to create virtual devices which share their
@@ -81,6 +85,28 @@
If unsure, say N.
+config PCI_PRI
+ bool "PCI PRI support"
+ select PCI_ATS
+ help
+ PRI is the PCI Page Request Interface. It allows PCI devices that are
+ behind an IOMMU to recover from page faults.
+
+ If unsure, say N.
+
+config PCI_PASID
+ bool "PCI PASID support"
+ depends on PCI
+ select PCI_ATS
+ help
+ Process Address Space Identifiers (PASIDs) can be used by PCI devices
+ to access more than one IO address space at the same time. To make
+ use of this feature an IOMMU is required which also supports PASIDs.
+ Select this option if you have such an IOMMU and want to compile the
+ driver for it into your kernel.
+
+ If unsure, say N.
+
config PCI_IOAPIC
bool
depends on PCI
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 6fadae3..083a49f 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -29,6 +29,7 @@
# Build the Hypertransport interrupt support
obj-$(CONFIG_HT_IRQ) += htirq.o
+obj-$(CONFIG_PCI_ATS) += ats.o
obj-$(CONFIG_PCI_IOV) += iov.o
#
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
new file mode 100644
index 0000000..f727a09
--- /dev/null
+++ b/drivers/pci/ats.c
@@ -0,0 +1,438 @@
+/*
+ * drivers/pci/ats.c
+ *
+ * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
+ * Copyright (C) 2011 Advanced Micro Devices,
+ *
+ * PCI Express I/O Virtualization (IOV) support.
+ * Address Translation Service 1.0
+ * Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
+ * PASID support added by Joerg Roedel <joerg.roedel@amd.com>
+ */
+
+#include <linux/pci-ats.h>
+#include <linux/pci.h>
+
+#include "pci.h"
+
+static int ats_alloc_one(struct pci_dev *dev, int ps)
+{
+ int pos;
+ u16 cap;
+ struct pci_ats *ats;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
+ if (!pos)
+ return -ENODEV;
+
+ ats = kzalloc(sizeof(*ats), GFP_KERNEL);
+ if (!ats)
+ return -ENOMEM;
+
+ ats->pos = pos;
+ ats->stu = ps;
+ pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
+ ats->qdep = PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
+ PCI_ATS_MAX_QDEP;
+ dev->ats = ats;
+
+ return 0;
+}
+
+static void ats_free_one(struct pci_dev *dev)
+{
+ kfree(dev->ats);
+ dev->ats = NULL;
+}
+
+/**
+ * pci_enable_ats - enable the ATS capability
+ * @dev: the PCI device
+ * @ps: the IOMMU page shift
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+ int rc;
+ u16 ctrl;
+
+ BUG_ON(dev->ats && dev->ats->is_enabled);
+
+ if (ps < PCI_ATS_MIN_STU)
+ return -EINVAL;
+
+ if (dev->is_physfn || dev->is_virtfn) {
+ struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
+
+ mutex_lock(&pdev->sriov->lock);
+ if (pdev->ats)
+ rc = pdev->ats->stu == ps ? 0 : -EINVAL;
+ else
+ rc = ats_alloc_one(pdev, ps);
+
+ if (!rc)
+ pdev->ats->ref_cnt++;
+ mutex_unlock(&pdev->sriov->lock);
+ if (rc)
+ return rc;
+ }
+
+ if (!dev->is_physfn) {
+ rc = ats_alloc_one(dev, ps);
+ if (rc)
+ return rc;
+ }
+
+ ctrl = PCI_ATS_CTRL_ENABLE;
+ if (!dev->is_virtfn)
+ ctrl |= PCI_ATS_CTRL_STU(ps - PCI_ATS_MIN_STU);
+ pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
+
+ dev->ats->is_enabled = 1;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_enable_ats);
+
+/**
+ * pci_disable_ats - disable the ATS capability
+ * @dev: the PCI device
+ */
+void pci_disable_ats(struct pci_dev *dev)
+{
+ u16 ctrl;
+
+ BUG_ON(!dev->ats || !dev->ats->is_enabled);
+
+ pci_read_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, &ctrl);
+ ctrl &= ~PCI_ATS_CTRL_ENABLE;
+ pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
+
+ dev->ats->is_enabled = 0;
+
+ if (dev->is_physfn || dev->is_virtfn) {
+ struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
+
+ mutex_lock(&pdev->sriov->lock);
+ pdev->ats->ref_cnt--;
+ if (!pdev->ats->ref_cnt)
+ ats_free_one(pdev);
+ mutex_unlock(&pdev->sriov->lock);
+ }
+
+ if (!dev->is_physfn)
+ ats_free_one(dev);
+}
+EXPORT_SYMBOL_GPL(pci_disable_ats);
+
+/**
+ * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
+ * @dev: the PCI device
+ *
+ * Returns the queue depth on success, or negative on failure.
+ *
+ * The ATS spec uses 0 in the Invalidate Queue Depth field to
+ * indicate that the function can accept 32 Invalidate Request.
+ * But here we use the `real' values (i.e. 1~32) for the Queue
+ * Depth; and 0 indicates the function shares the Queue with
+ * other functions (doesn't exclusively own a Queue).
+ */
+int pci_ats_queue_depth(struct pci_dev *dev)
+{
+ int pos;
+ u16 cap;
+
+ if (dev->is_virtfn)
+ return 0;
+
+ if (dev->ats)
+ return dev->ats->qdep;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
+ if (!pos)
+ return -ENODEV;
+
+ pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
+
+ return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
+ PCI_ATS_MAX_QDEP;
+}
+EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
+
+#ifdef CONFIG_PCI_PRI
+/**
+ * pci_enable_pri - Enable PRI capability
+ * @ pdev: PCI device structure
+ *
+ * Returns 0 on success, negative value on error
+ */
+int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
+{
+ u16 control, status;
+ u32 max_requests;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF, &status);
+ if ((control & PCI_PRI_ENABLE) || !(status & PCI_PRI_STATUS_STOPPED))
+ return -EBUSY;
+
+ pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ_OFF, &max_requests);
+ reqs = min(max_requests, reqs);
+ pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ_OFF, reqs);
+
+ control |= PCI_PRI_ENABLE;
+ pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_enable_pri);
+
+/**
+ * pci_disable_pri - Disable PRI capability
+ * @pdev: PCI device structure
+ *
+ * Only clears the enabled-bit, regardless of its former value
+ */
+void pci_disable_pri(struct pci_dev *pdev)
+{
+ u16 control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ control &= ~PCI_PRI_ENABLE;
+ pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+}
+EXPORT_SYMBOL_GPL(pci_disable_pri);
+
+/**
+ * pci_pri_enabled - Checks if PRI capability is enabled
+ * @pdev: PCI device structure
+ *
+ * Returns true if PRI is enabled on the device, false otherwise
+ */
+bool pci_pri_enabled(struct pci_dev *pdev)
+{
+ u16 control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return false;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+
+ return (control & PCI_PRI_ENABLE) ? true : false;
+}
+EXPORT_SYMBOL_GPL(pci_pri_enabled);
+
+/**
+ * pci_reset_pri - Resets device's PRI state
+ * @pdev: PCI device structure
+ *
+ * The PRI capability must be disabled before this function is called.
+ * Returns 0 on success, negative value on error.
+ */
+int pci_reset_pri(struct pci_dev *pdev)
+{
+ u16 control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ if (control & PCI_PRI_ENABLE)
+ return -EBUSY;
+
+ control |= PCI_PRI_RESET;
+
+ pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_reset_pri);
+
+/**
+ * pci_pri_stopped - Checks whether the PRI capability is stopped
+ * @pdev: PCI device structure
+ *
+ * Returns true if the PRI capability on the device is disabled and the
+ * device has no outstanding PRI requests, false otherwise. The device
+ * indicates this via the STOPPED bit in the status register of the
+ * capability.
+ * The device internal state can be cleared by resetting the PRI state
+ * with pci_reset_pri(). This can force the capability into the STOPPED
+ * state.
+ */
+bool pci_pri_stopped(struct pci_dev *pdev)
+{
+ u16 control, status;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return true;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF, &status);
+
+ if (control & PCI_PRI_ENABLE)
+ return false;
+
+ return (status & PCI_PRI_STATUS_STOPPED) ? true : false;
+}
+EXPORT_SYMBOL_GPL(pci_pri_stopped);
+
+/**
+ * pci_pri_status - Request PRI status of a device
+ * @pdev: PCI device structure
+ *
+ * Returns negative value on failure, status on success. The status can
+ * be checked against status-bits. Supported bits are currently:
+ * PCI_PRI_STATUS_RF: Response failure
+ * PCI_PRI_STATUS_UPRGI: Unexpected Page Request Group Index
+ * PCI_PRI_STATUS_STOPPED: PRI has stopped
+ */
+int pci_pri_status(struct pci_dev *pdev)
+{
+ u16 status, control;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF, &status);
+
+ /* Stopped bit is undefined when enable == 1, so clear it */
+ if (control & PCI_PRI_ENABLE)
+ status &= ~PCI_PRI_STATUS_STOPPED;
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(pci_pri_status);
+#endif /* CONFIG_PCI_PRI */
+
+#ifdef CONFIG_PCI_PASID
+/**
+ * pci_enable_pasid - Enable the PASID capability
+ * @pdev: PCI device structure
+ * @features: Features to enable
+ *
+ * Returns 0 on success, negative value on error. This function checks
+ * whether the features are actually supported by the device and returns
+ * an error if not.
+ */
+int pci_enable_pasid(struct pci_dev *pdev, int features)
+{
+ u16 control, supported;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PASID_CONTROL_OFF, &control);
+ pci_read_config_word(pdev, pos + PCI_PASID_CAP_OFF, &supported);
+
+ if (!(supported & PCI_PASID_ENABLE))
+ return -EINVAL;
+
+ supported &= PCI_PASID_EXEC | PCI_PASID_PRIV;
+
+ /* User wants to enable anything unsupported? */
+ if ((supported & features) != features)
+ return -EINVAL;
+
+ control = PCI_PASID_ENABLE | features;
+
+ pci_write_config_word(pdev, pos + PCI_PASID_CONTROL_OFF, control);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_enable_pasid);
+
+/**
+ * pci_disable_pasid - Disable the PASID capability
+ * @pdev: PCI device structure
+ *
+ */
+void pci_disable_pasid(struct pci_dev *pdev)
+{
+ u16 control = 0;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return;
+
+ pci_write_config_word(pdev, pos + PCI_PASID_CONTROL_OFF, control);
+}
+EXPORT_SYMBOL_GPL(pci_disable_pasid);
+
+/**
+ * pci_pasid_features - Check which PASID features are supported
+ * @pdev: PCI device structure
+ *
+ * Returns a negative value when no PASI capability is present.
+ * Otherwise is returns a bitmask with supported features. Current
+ * features reported are:
+ * PCI_PASID_ENABLE - PASID capability can be enabled
+ * PCI_PASID_EXEC - Execute permission supported
+ * PCI_PASID_PRIV - Priviledged mode supported
+ */
+int pci_pasid_features(struct pci_dev *pdev)
+{
+ u16 supported;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PASID_CAP_OFF, &supported);
+
+ supported &= PCI_PASID_ENABLE | PCI_PASID_EXEC | PCI_PASID_PRIV;
+
+ return supported;
+}
+EXPORT_SYMBOL_GPL(pci_pasid_features);
+
+#define PASID_NUMBER_SHIFT 8
+#define PASID_NUMBER_MASK (0x1f << PASID_NUMBER_SHIFT)
+/**
+ * pci_max_pasid - Get maximum number of PASIDs supported by device
+ * @pdev: PCI device structure
+ *
+ * Returns negative value when PASID capability is not present.
+ * Otherwise it returns the numer of supported PASIDs.
+ */
+int pci_max_pasids(struct pci_dev *pdev)
+{
+ u16 supported;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_PASID_CAP);
+ if (!pos)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pos + PCI_PASID_CAP_OFF, &supported);
+
+ supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
+
+ return (1 << supported);
+}
+EXPORT_SYMBOL_GPL(pci_max_pasids);
+#endif /* CONFIG_PCI_PASID */
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 2202857..596172b 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -48,6 +48,7 @@
#include <linux/pci-acpi.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include "../pci.h"
#include "acpiphp.h"
@@ -1149,15 +1150,35 @@
return AE_OK ;
}
-/**
- * handle_hotplug_event_bridge - handle ACPI event on bridges
- * @handle: Notify()'ed acpi_handle
- * @type: Notify code
- * @context: pointer to acpiphp_bridge structure
- *
- * Handles ACPI event notification on {host,p2p} bridges.
- */
-static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context)
+struct acpiphp_hp_work {
+ struct work_struct work;
+ acpi_handle handle;
+ u32 type;
+ void *context;
+};
+
+static void alloc_acpiphp_hp_work(acpi_handle handle, u32 type,
+ void *context,
+ void (*func)(struct work_struct *work))
+{
+ struct acpiphp_hp_work *hp_work;
+ int ret;
+
+ hp_work = kmalloc(sizeof(*hp_work), GFP_KERNEL);
+ if (!hp_work)
+ return;
+
+ hp_work->handle = handle;
+ hp_work->type = type;
+ hp_work->context = context;
+
+ INIT_WORK(&hp_work->work, func);
+ ret = queue_work(kacpi_hotplug_wq, &hp_work->work);
+ if (!ret)
+ kfree(hp_work);
+}
+
+static void _handle_hotplug_event_bridge(struct work_struct *work)
{
struct acpiphp_bridge *bridge;
char objname[64];
@@ -1165,11 +1186,18 @@
.pointer = objname };
struct acpi_device *device;
int num_sub_bridges = 0;
+ struct acpiphp_hp_work *hp_work;
+ acpi_handle handle;
+ u32 type;
+
+ hp_work = container_of(work, struct acpiphp_hp_work, work);
+ handle = hp_work->handle;
+ type = hp_work->type;
if (acpi_bus_get_device(handle, &device)) {
/* This bridge must have just been physically inserted */
handle_bridge_insertion(handle, type);
- return;
+ goto out;
}
bridge = acpiphp_handle_to_bridge(handle);
@@ -1180,7 +1208,7 @@
if (!bridge && !num_sub_bridges) {
err("cannot get bridge info\n");
- return;
+ goto out;
}
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
@@ -1241,22 +1269,49 @@
warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
break;
}
+
+out:
+ kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
}
/**
- * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
+ * handle_hotplug_event_bridge - handle ACPI event on bridges
* @handle: Notify()'ed acpi_handle
* @type: Notify code
- * @context: pointer to acpiphp_func structure
+ * @context: pointer to acpiphp_bridge structure
*
- * Handles ACPI event notification on slots.
+ * Handles ACPI event notification on {host,p2p} bridges.
*/
-static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
+static void handle_hotplug_event_bridge(acpi_handle handle, u32 type,
+ void *context)
+{
+ /*
+ * Currently the code adds all hotplug events to the kacpid_wq
+ * queue when it should add hotplug events to the kacpi_hotplug_wq.
+ * The proper way to fix this is to reorganize the code so that
+ * drivers (dock, etc.) do not call acpi_os_execute(), etc.
+ * For now just re-add this work to the kacpi_hotplug_wq so we
+ * don't deadlock on hotplug actions.
+ */
+ alloc_acpiphp_hp_work(handle, type, context,
+ _handle_hotplug_event_bridge);
+}
+
+static void _handle_hotplug_event_func(struct work_struct *work)
{
struct acpiphp_func *func;
char objname[64];
struct acpi_buffer buffer = { .length = sizeof(objname),
.pointer = objname };
+ struct acpiphp_hp_work *hp_work;
+ acpi_handle handle;
+ u32 type;
+ void *context;
+
+ hp_work = container_of(work, struct acpiphp_hp_work, work);
+ handle = hp_work->handle;
+ type = hp_work->type;
+ context = hp_work->context;
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
@@ -1291,8 +1346,32 @@
warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
break;
}
+
+ kfree(hp_work); /* allocated in handle_hotplug_event_func */
}
+/**
+ * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
+ * @handle: Notify()'ed acpi_handle
+ * @type: Notify code
+ * @context: pointer to acpiphp_func structure
+ *
+ * Handles ACPI event notification on slots.
+ */
+static void handle_hotplug_event_func(acpi_handle handle, u32 type,
+ void *context)
+{
+ /*
+ * Currently the code adds all hotplug events to the kacpid_wq
+ * queue when it should add hotplug events to the kacpi_hotplug_wq.
+ * The proper way to fix this is to reorganize the code so that
+ * drivers (dock, etc.) do not call acpi_os_execute(), etc.
+ * For now just re-add this work to the kacpi_hotplug_wq so we
+ * don't deadlock on hotplug actions.
+ */
+ alloc_acpiphp_hp_work(handle, type, context,
+ _handle_hotplug_event_func);
+}
static acpi_status
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 42fae47..9b4e88c63 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -722,145 +722,3 @@
return dev->sriov->nr_virtfn;
}
EXPORT_SYMBOL_GPL(pci_num_vf);
-
-static int ats_alloc_one(struct pci_dev *dev, int ps)
-{
- int pos;
- u16 cap;
- struct pci_ats *ats;
-
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
- if (!pos)
- return -ENODEV;
-
- ats = kzalloc(sizeof(*ats), GFP_KERNEL);
- if (!ats)
- return -ENOMEM;
-
- ats->pos = pos;
- ats->stu = ps;
- pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
- ats->qdep = PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
- PCI_ATS_MAX_QDEP;
- dev->ats = ats;
-
- return 0;
-}
-
-static void ats_free_one(struct pci_dev *dev)
-{
- kfree(dev->ats);
- dev->ats = NULL;
-}
-
-/**
- * pci_enable_ats - enable the ATS capability
- * @dev: the PCI device
- * @ps: the IOMMU page shift
- *
- * Returns 0 on success, or negative on failure.
- */
-int pci_enable_ats(struct pci_dev *dev, int ps)
-{
- int rc;
- u16 ctrl;
-
- BUG_ON(dev->ats && dev->ats->is_enabled);
-
- if (ps < PCI_ATS_MIN_STU)
- return -EINVAL;
-
- if (dev->is_physfn || dev->is_virtfn) {
- struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
-
- mutex_lock(&pdev->sriov->lock);
- if (pdev->ats)
- rc = pdev->ats->stu == ps ? 0 : -EINVAL;
- else
- rc = ats_alloc_one(pdev, ps);
-
- if (!rc)
- pdev->ats->ref_cnt++;
- mutex_unlock(&pdev->sriov->lock);
- if (rc)
- return rc;
- }
-
- if (!dev->is_physfn) {
- rc = ats_alloc_one(dev, ps);
- if (rc)
- return rc;
- }
-
- ctrl = PCI_ATS_CTRL_ENABLE;
- if (!dev->is_virtfn)
- ctrl |= PCI_ATS_CTRL_STU(ps - PCI_ATS_MIN_STU);
- pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
-
- dev->ats->is_enabled = 1;
-
- return 0;
-}
-
-/**
- * pci_disable_ats - disable the ATS capability
- * @dev: the PCI device
- */
-void pci_disable_ats(struct pci_dev *dev)
-{
- u16 ctrl;
-
- BUG_ON(!dev->ats || !dev->ats->is_enabled);
-
- pci_read_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, &ctrl);
- ctrl &= ~PCI_ATS_CTRL_ENABLE;
- pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
-
- dev->ats->is_enabled = 0;
-
- if (dev->is_physfn || dev->is_virtfn) {
- struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
-
- mutex_lock(&pdev->sriov->lock);
- pdev->ats->ref_cnt--;
- if (!pdev->ats->ref_cnt)
- ats_free_one(pdev);
- mutex_unlock(&pdev->sriov->lock);
- }
-
- if (!dev->is_physfn)
- ats_free_one(dev);
-}
-
-/**
- * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
- * @dev: the PCI device
- *
- * Returns the queue depth on success, or negative on failure.
- *
- * The ATS spec uses 0 in the Invalidate Queue Depth field to
- * indicate that the function can accept 32 Invalidate Request.
- * But here we use the `real' values (i.e. 1~32) for the Queue
- * Depth; and 0 indicates the function shares the Queue with
- * other functions (doesn't exclusively own a Queue).
- */
-int pci_ats_queue_depth(struct pci_dev *dev)
-{
- int pos;
- u16 cap;
-
- if (dev->is_virtfn)
- return 0;
-
- if (dev->ats)
- return dev->ats->qdep;
-
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
- if (!pos)
- return -ENODEV;
-
- pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
-
- return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
- PCI_ATS_MAX_QDEP;
-}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index d36f41e..4ecb640 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -46,6 +46,9 @@
struct pci_dev *pci_dev = context;
if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
+ if (pci_dev->pme_poll)
+ pci_dev->pme_poll = false;
+
pci_wakeup_event(pci_dev);
pci_check_pme_status(pci_dev);
pm_runtime_resume(&pci_dev->dev);
@@ -282,7 +285,6 @@
{
struct acpi_device *dev;
acpi_handle handle;
- int error = -ENODEV;
if (!device_run_wake(phys_dev))
return -EINVAL;
@@ -302,7 +304,7 @@
acpi_disable_wakeup_device_power(dev);
}
- return error;
+ return 0;
}
static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e9651f0..6f45a73 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1407,13 +1407,16 @@
/**
* pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
* @dev: Device to handle.
- * @ign: Ignored.
+ * @pme_poll_reset: Whether or not to reset the device's pme_poll flag.
*
* Check if @dev has generated PME and queue a resume request for it in that
* case.
*/
-static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
+static int pci_pme_wakeup(struct pci_dev *dev, void *pme_poll_reset)
{
+ if (pme_poll_reset && dev->pme_poll)
+ dev->pme_poll = false;
+
if (pci_check_pme_status(dev)) {
pci_wakeup_event(dev);
pm_request_resume(&dev->dev);
@@ -1428,7 +1431,7 @@
void pci_pme_wakeup_bus(struct pci_bus *bus)
{
if (bus)
- pci_walk_bus(bus, pci_pme_wakeup, NULL);
+ pci_walk_bus(bus, pci_pme_wakeup, (void *)true);
}
/**
@@ -1446,31 +1449,26 @@
static void pci_pme_list_scan(struct work_struct *work)
{
- struct pci_pme_device *pme_dev;
+ struct pci_pme_device *pme_dev, *n;
mutex_lock(&pci_pme_list_mutex);
if (!list_empty(&pci_pme_list)) {
- list_for_each_entry(pme_dev, &pci_pme_list, list)
- pci_pme_wakeup(pme_dev->dev, NULL);
- schedule_delayed_work(&pci_pme_work, msecs_to_jiffies(PME_TIMEOUT));
+ list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
+ if (pme_dev->dev->pme_poll) {
+ pci_pme_wakeup(pme_dev->dev, NULL);
+ } else {
+ list_del(&pme_dev->list);
+ kfree(pme_dev);
+ }
+ }
+ if (!list_empty(&pci_pme_list))
+ schedule_delayed_work(&pci_pme_work,
+ msecs_to_jiffies(PME_TIMEOUT));
}
mutex_unlock(&pci_pme_list_mutex);
}
/**
- * pci_external_pme - is a device an external PCI PME source?
- * @dev: PCI device to check
- *
- */
-
-static bool pci_external_pme(struct pci_dev *dev)
-{
- if (pci_is_pcie(dev) || dev->bus->number == 0)
- return false;
- return true;
-}
-
-/**
* pci_pme_active - enable or disable PCI device's PME# function
* @dev: PCI device to handle.
* @enable: 'true' to enable PME# generation; 'false' to disable it.
@@ -1503,7 +1501,7 @@
hit, and the power savings from the devices will still be a
win. */
- if (pci_external_pme(dev)) {
+ if (dev->pme_poll) {
struct pci_pme_device *pme_dev;
if (enable) {
pme_dev = kmalloc(sizeof(struct pci_pme_device),
@@ -1821,6 +1819,7 @@
(pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
(pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
+ dev->pme_poll = true;
/*
* Make device's PM flags reflect the wake-up capability, but
* let the user space enable it to wake up the system as needed.
@@ -3203,8 +3202,6 @@
if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
goto out;
- v = (ffs(rq) - 8) << 12;
-
cap = pci_pcie_cap(dev);
if (!cap)
goto out;
@@ -3212,6 +3209,22 @@
err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
if (err)
goto out;
+ /*
+ * If using the "performance" PCIe config, we clamp the
+ * read rq size to the max packet size to prevent the
+ * host bridge generating requests larger than we can
+ * cope with
+ */
+ if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
+ int mps = pcie_get_mps(dev);
+
+ if (mps < 0)
+ return mps;
+ if (mps < rq)
+ rq = mps;
+ }
+
+ v = (ffs(rq) - 8) << 12;
if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
ctl &= ~PCI_EXP_DEVCTL_READRQ;
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 0057344..001f1b7 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -84,6 +84,9 @@
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip PCIe devices in case we started from a root port. */
if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+ if (dev->pme_poll)
+ dev->pme_poll = false;
+
pci_wakeup_event(dev);
pm_request_resume(&dev->dev);
ret = true;
@@ -142,6 +145,9 @@
/* First, check if the PME is from the root port itself. */
if (port->devfn == devfn && port->bus->number == busnr) {
+ if (port->pme_poll)
+ port->pme_poll = false;
+
if (pci_check_pme_status(port)) {
pm_request_resume(&port->dev);
found = true;
@@ -187,6 +193,9 @@
/* The device is there, but we have to check its PME status. */
found = pci_check_pme_status(dev);
if (found) {
+ if (dev->pme_poll)
+ dev->pme_poll = false;
+
pci_wakeup_event(dev);
pm_request_resume(&dev->dev);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6ab6bd3..04e74f4 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1363,31 +1363,25 @@
static void pcie_write_mps(struct pci_dev *dev, int mps)
{
- int rc, dev_mpss;
-
- dev_mpss = 128 << dev->pcie_mpss;
+ int rc;
if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
- if (dev->bus->self) {
- dev_dbg(&dev->bus->dev, "Bus MPSS %d\n",
- 128 << dev->bus->self->pcie_mpss);
+ mps = 128 << dev->pcie_mpss;
- /* For "MPS Force Max", the assumption is made that
+ if (dev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && dev->bus->self)
+ /* For "Performance", the assumption is made that
* downstream communication will never be larger than
* the MRRS. So, the MPS only needs to be configured
* for the upstream communication. This being the case,
* walk from the top down and set the MPS of the child
* to that of the parent bus.
+ *
+ * Configure the device MPS with the smaller of the
+ * device MPSS or the bridge MPS (which is assumed to be
+ * properly configured at this point to the largest
+ * allowable MPS based on its parent bus).
*/
- mps = 128 << dev->bus->self->pcie_mpss;
- if (mps > dev_mpss)
- dev_warn(&dev->dev, "MPS configured higher than"
- " maximum supported by the device. If"
- " a bus issue occurs, try running with"
- " pci=pcie_bus_safe.\n");
- }
-
- dev->pcie_mpss = ffs(mps) - 8;
+ mps = min(mps, pcie_get_mps(dev->bus->self));
}
rc = pcie_set_mps(dev, mps);
@@ -1395,25 +1389,22 @@
dev_err(&dev->dev, "Failed attempting to set the MPS\n");
}
-static void pcie_write_mrrs(struct pci_dev *dev, int mps)
+static void pcie_write_mrrs(struct pci_dev *dev)
{
- int rc, mrrs, dev_mpss;
+ int rc, mrrs;
/* In the "safe" case, do not configure the MRRS. There appear to be
* issues with setting MRRS to 0 on a number of devices.
*/
-
if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
return;
- dev_mpss = 128 << dev->pcie_mpss;
-
/* For Max performance, the MRRS must be set to the largest supported
* value. However, it cannot be configured larger than the MPS the
- * device or the bus can support. This assumes that the largest MRRS
- * available on the device cannot be smaller than the device MPSS.
+ * device or the bus can support. This should already be properly
+ * configured by a prior call to pcie_write_mps.
*/
- mrrs = min(mps, dev_mpss);
+ mrrs = pcie_get_mps(dev);
/* MRRS is a R/W register. Invalid values can be written, but a
* subsequent read will verify if the value is acceptable or not.
@@ -1421,38 +1412,41 @@
* shrink the value until it is acceptable to the HW.
*/
while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
- dev_warn(&dev->dev, "Attempting to modify the PCI-E MRRS value"
- " to %d. If any issues are encountered, please try "
- "running with pci=pcie_bus_safe\n", mrrs);
rc = pcie_set_readrq(dev, mrrs);
- if (rc)
- dev_err(&dev->dev,
- "Failed attempting to set the MRRS\n");
+ if (!rc)
+ break;
+ dev_warn(&dev->dev, "Failed attempting to set the MRRS\n");
mrrs /= 2;
}
+
+ if (mrrs < 128)
+ dev_err(&dev->dev, "MRRS was unable to be configured with a "
+ "safe value. If problems are experienced, try running "
+ "with pci=pcie_bus_safe.\n");
}
static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
{
- int mps = 128 << *(u8 *)data;
+ int mps, orig_mps;
if (!pci_is_pcie(dev))
return 0;
- dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
- pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
+ mps = 128 << *(u8 *)data;
+ orig_mps = pcie_get_mps(dev);
pcie_write_mps(dev, mps);
- pcie_write_mrrs(dev, mps);
+ pcie_write_mrrs(dev);
- dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
- pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
+ dev_info(&dev->dev, "PCI-E Max Payload Size set to %4d/%4d (was %4d), "
+ "Max Read Rq %4d\n", pcie_get_mps(dev), 128 << dev->pcie_mpss,
+ orig_mps, pcie_get_readrq(dev));
return 0;
}
-/* pcie_bus_configure_mps requires that pci_walk_bus work in a top-down,
+/* pcie_bus_configure_settings requires that pci_walk_bus work in a top-down,
* parents then children fashion. If this changes, then this code will not
* work as designed.
*/
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b23856a..7285145 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2745,20 +2745,6 @@
/* disable must be done via function #0 */
if (PCI_FUNC(dev->devfn))
return;
-
- pci_read_config_byte(dev, 0xCB, &disable);
-
- if (disable & 0x02)
- return;
-
- pci_read_config_byte(dev, 0xCA, &write_enable);
- pci_write_config_byte(dev, 0xCA, 0x57);
- pci_write_config_byte(dev, 0xCB, disable | 0x02);
- pci_write_config_byte(dev, 0xCA, write_enable);
-
- dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
- dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-
/*
* RICOH 0xe823 SD/MMC card reader fails to recognize
* certain types of SD/MMC cards. Lowering the SD base
@@ -2781,6 +2767,20 @@
dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
}
+
+ pci_read_config_byte(dev, 0xCB, &disable);
+
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0xCA, &write_enable);
+ pci_write_config_byte(dev, 0xCA, 0x57);
+ pci_write_config_byte(dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(dev, 0xCA, write_enable);
+
+ dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+ dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
@@ -2822,6 +2822,89 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
+/* Some PCIe devices do not work reliably with the claimed maximum
+ * payload size supported.
+ */
+static void __devinit fixup_mpss_256(struct pci_dev *dev)
+{
+ dev->pcie_mpss = 1; /* 256 bytes */
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+
+/* Intel 5000 and 5100 Memory controllers have an errata with read completion
+ * coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
+ * Since there is no way of knowing what the PCIE MPS on each fabric will be
+ * until all of the devices are discovered and buses walked, read completion
+ * coalescing must be disabled. Unfortunately, it cannot be re-enabled because
+ * it is possible to hotplug a device with MPS of 256B.
+ */
+static void __devinit quirk_intel_mc_errata(struct pci_dev *dev)
+{
+ int err;
+ u16 rcc;
+
+ if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
+ return;
+
+ /* Intel errata specifies bits to change but does not say what they are.
+ * Keeping them magical until such time as the registers and values can
+ * be explained.
+ */
+ err = pci_read_config_word(dev, 0x48, &rcc);
+ if (err) {
+ dev_err(&dev->dev, "Error attempting to read the read "
+ "completion coalescing register.\n");
+ return;
+ }
+
+ if (!(rcc & (1 << 10)))
+ return;
+
+ rcc &= ~(1 << 10);
+
+ err = pci_write_config_word(dev, 0x48, rcc);
+ if (err) {
+ dev_err(&dev->dev, "Error attempting to write the read "
+ "completion coalescing register.\n");
+ return;
+ }
+
+ pr_info_once("Read completion coalescing disabled due to hardware "
+ "errata relating to 256B MPS.\n");
+}
+/* Intel 5000 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
+/* Intel 5100 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 784da9d..86b69f85 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -426,7 +426,7 @@
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
-static void pci_setup_bridge(struct pci_bus *bus)
+void pci_setup_bridge(struct pci_bus *bus)
{
unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index f56d7de..22a75e6 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -97,7 +97,7 @@
static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG |
+ __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
((state->flags & SS_RESET) ?
BALLOON3_FPGA_SETnCLR : 0));
return 0;
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index e956f65..66ab92c 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -17,7 +17,7 @@
#include <asm/mach-types.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/vpac270.h>
#include "soc_common.h"
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 10cf250..f4e3d82 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -61,15 +61,18 @@
depends on INPUT
depends on RFKILL || RFKILL = n
select INPUT_SPARSEKMAP
+ select INPUT_POLLDEV
---help---
- This is the new Linux driver for Asus laptops. It may also support some
- MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
- standard ACPI events and input events. It also adds
- support for video output switching, LCD backlight control, Bluetooth and
- Wlan control, and most importantly, allows you to blink those fancy LEDs.
+ This is a driver for Asus laptops, Lenovo SL and the Pegatron
+ Lucid tablet. It may also support some MEDION, JVC or VICTOR
+ laptops. It makes all the extra buttons generate standard
+ ACPI events and input events, and on the Lucid the built-in
+ accelerometer appears as an input device. It also adds
+ support for video output switching, LCD backlight control,
+ Bluetooth and Wlan control, and most importantly, allows you
+ to blink those fancy LEDs.
- For more information and a userspace daemon for handling the extra
- buttons see <http://acpi4asus.sf.net>.
+ For more information see <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index af2bb20..b848277 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -190,6 +190,7 @@
ACER_AMW0,
ACER_AMW0_V2,
ACER_WMID,
+ ACER_WMID_v2,
};
#define ACER_DEFAULT_WIRELESS 0
@@ -205,6 +206,7 @@
static int force_series;
static bool ec_raw_mode;
static bool has_type_aa;
+static u16 commun_func_bitmap;
module_param(mailled, int, 0444);
module_param(brightness, int, 0444);
@@ -464,6 +466,15 @@
},
.driver_data = &quirk_lenovo_ideapad_s205,
},
+ {
+ .callback = dmi_matched,
+ .ident = "Lenovo 3000 N200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "0687A31"),
+ },
+ .driver_data = &quirk_fujitsu_amilo_li_1718,
+ },
{}
};
@@ -868,6 +879,174 @@
return WMI_execute_u32(method_id, (u32)value, NULL);
}
+static acpi_status wmid3_get_device_status(u32 *value, u16 device)
+{
+ struct wmid3_gds_return_value return_value;
+ acpi_status status;
+ union acpi_object *obj;
+ struct wmid3_gds_input_param params = {
+ .function_num = 0x1,
+ .hotkey_number = 0x01,
+ .devices = device,
+ };
+ struct acpi_buffer input = {
+ sizeof(struct wmid3_gds_input_param),
+ ¶ms
+ };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = output.pointer;
+
+ if (!obj)
+ return AE_ERROR;
+ else if (obj->type != ACPI_TYPE_BUFFER) {
+ kfree(obj);
+ return AE_ERROR;
+ }
+ if (obj->buffer.length != 8) {
+ pr_warn("Unknown buffer length %d\n", obj->buffer.length);
+ kfree(obj);
+ return AE_ERROR;
+ }
+
+ return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+ kfree(obj);
+
+ if (return_value.error_code || return_value.ec_return_value)
+ pr_warn("Get 0x%x Device Status failed: 0x%x - 0x%x\n",
+ device,
+ return_value.error_code,
+ return_value.ec_return_value);
+ else
+ *value = !!(return_value.devices & device);
+
+ return status;
+}
+
+static acpi_status wmid_v2_get_u32(u32 *value, u32 cap)
+{
+ u16 device;
+
+ switch (cap) {
+ case ACER_CAP_WIRELESS:
+ device = ACER_WMID3_GDS_WIRELESS;
+ break;
+ case ACER_CAP_BLUETOOTH:
+ device = ACER_WMID3_GDS_BLUETOOTH;
+ break;
+ case ACER_CAP_THREEG:
+ device = ACER_WMID3_GDS_THREEG;
+ break;
+ default:
+ return AE_ERROR;
+ }
+ return wmid3_get_device_status(value, device);
+}
+
+static acpi_status wmid3_set_device_status(u32 value, u16 device)
+{
+ struct wmid3_gds_return_value return_value;
+ acpi_status status;
+ union acpi_object *obj;
+ u16 devices;
+ struct wmid3_gds_input_param params = {
+ .function_num = 0x1,
+ .hotkey_number = 0x01,
+ .devices = commun_func_bitmap,
+ };
+ struct acpi_buffer input = {
+ sizeof(struct wmid3_gds_input_param),
+ ¶ms
+ };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer output2 = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = output.pointer;
+
+ if (!obj)
+ return AE_ERROR;
+ else if (obj->type != ACPI_TYPE_BUFFER) {
+ kfree(obj);
+ return AE_ERROR;
+ }
+ if (obj->buffer.length != 8) {
+ pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+ kfree(obj);
+ return AE_ERROR;
+ }
+
+ return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+ kfree(obj);
+
+ if (return_value.error_code || return_value.ec_return_value) {
+ pr_warning("Get Current Device Status failed: "
+ "0x%x - 0x%x\n", return_value.error_code,
+ return_value.ec_return_value);
+ return status;
+ }
+
+ devices = return_value.devices;
+ params.function_num = 0x2;
+ params.hotkey_number = 0x01;
+ params.devices = (value) ? (devices | device) : (devices & ~device);
+
+ status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output2);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = output2.pointer;
+
+ if (!obj)
+ return AE_ERROR;
+ else if (obj->type != ACPI_TYPE_BUFFER) {
+ kfree(obj);
+ return AE_ERROR;
+ }
+ if (obj->buffer.length != 4) {
+ pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+ kfree(obj);
+ return AE_ERROR;
+ }
+
+ return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+ kfree(obj);
+
+ if (return_value.error_code || return_value.ec_return_value)
+ pr_warning("Set Device Status failed: "
+ "0x%x - 0x%x\n", return_value.error_code,
+ return_value.ec_return_value);
+
+ return status;
+}
+
+static acpi_status wmid_v2_set_u32(u32 value, u32 cap)
+{
+ u16 device;
+
+ switch (cap) {
+ case ACER_CAP_WIRELESS:
+ device = ACER_WMID3_GDS_WIRELESS;
+ break;
+ case ACER_CAP_BLUETOOTH:
+ device = ACER_WMID3_GDS_BLUETOOTH;
+ break;
+ case ACER_CAP_THREEG:
+ device = ACER_WMID3_GDS_THREEG;
+ break;
+ default:
+ return AE_ERROR;
+ }
+ return wmid3_set_device_status(value, device);
+}
+
static void type_aa_dmi_decode(const struct dmi_header *header, void *dummy)
{
struct hotkey_function_type_aa *type_aa;
@@ -881,6 +1060,7 @@
pr_info("Function bitmap for Communication Button: 0x%x\n",
type_aa->commun_func_bitmap);
+ commun_func_bitmap = type_aa->commun_func_bitmap;
if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_WIRELESS)
interface->capability |= ACER_CAP_WIRELESS;
@@ -913,17 +1093,13 @@
return AE_ERROR;
}
- dmi_walk(type_aa_dmi_decode, NULL);
- if (!has_type_aa) {
+ pr_info("Function bitmap for Communication Device: 0x%x\n", devices);
+ if (devices & 0x07)
interface->capability |= ACER_CAP_WIRELESS;
- if (devices & 0x40)
- interface->capability |= ACER_CAP_THREEG;
- if (devices & 0x10)
- interface->capability |= ACER_CAP_BLUETOOTH;
- }
-
- /* WMID always provides brightness methods */
- interface->capability |= ACER_CAP_BRIGHTNESS;
+ if (devices & 0x40)
+ interface->capability |= ACER_CAP_THREEG;
+ if (devices & 0x10)
+ interface->capability |= ACER_CAP_BLUETOOTH;
if (!(devices & 0x20))
max_brightness = 0x9;
@@ -936,6 +1112,10 @@
.type = ACER_WMID,
};
+static struct wmi_interface wmid_v2_interface = {
+ .type = ACER_WMID_v2,
+};
+
/*
* Generic Device (interface-independent)
*/
@@ -956,6 +1136,14 @@
case ACER_WMID:
status = WMID_get_u32(value, cap, interface);
break;
+ case ACER_WMID_v2:
+ if (cap & (ACER_CAP_WIRELESS |
+ ACER_CAP_BLUETOOTH |
+ ACER_CAP_THREEG))
+ status = wmid_v2_get_u32(value, cap);
+ else if (wmi_has_guid(WMID_GUID2))
+ status = WMID_get_u32(value, cap, interface);
+ break;
}
return status;
@@ -989,6 +1177,13 @@
}
case ACER_WMID:
return WMID_set_u32(value, cap, interface);
+ case ACER_WMID_v2:
+ if (cap & (ACER_CAP_WIRELESS |
+ ACER_CAP_BLUETOOTH |
+ ACER_CAP_THREEG))
+ return wmid_v2_set_u32(value, cap);
+ else if (wmi_has_guid(WMID_GUID2))
+ return WMID_set_u32(value, cap, interface);
default:
return AE_BAD_PARAMETER;
}
@@ -1095,186 +1290,6 @@
backlight_device_unregister(acer_backlight_device);
}
-static acpi_status wmid3_get_device_status(u32 *value, u16 device)
-{
- struct wmid3_gds_return_value return_value;
- acpi_status status;
- union acpi_object *obj;
- struct wmid3_gds_input_param params = {
- .function_num = 0x1,
- .hotkey_number = 0x01,
- .devices = device,
- };
- struct acpi_buffer input = {
- sizeof(struct wmid3_gds_input_param),
- ¶ms
- };
- struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
-
- status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output);
- if (ACPI_FAILURE(status))
- return status;
-
- obj = output.pointer;
-
- if (!obj)
- return AE_ERROR;
- else if (obj->type != ACPI_TYPE_BUFFER) {
- kfree(obj);
- return AE_ERROR;
- }
- if (obj->buffer.length != 8) {
- pr_warn("Unknown buffer length %d\n", obj->buffer.length);
- kfree(obj);
- return AE_ERROR;
- }
-
- return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
- kfree(obj);
-
- if (return_value.error_code || return_value.ec_return_value)
- pr_warn("Get Device Status failed: 0x%x - 0x%x\n",
- return_value.error_code,
- return_value.ec_return_value);
- else
- *value = !!(return_value.devices & device);
-
- return status;
-}
-
-static acpi_status get_device_status(u32 *value, u32 cap)
-{
- if (wmi_has_guid(WMID_GUID3)) {
- u16 device;
-
- switch (cap) {
- case ACER_CAP_WIRELESS:
- device = ACER_WMID3_GDS_WIRELESS;
- break;
- case ACER_CAP_BLUETOOTH:
- device = ACER_WMID3_GDS_BLUETOOTH;
- break;
- case ACER_CAP_THREEG:
- device = ACER_WMID3_GDS_THREEG;
- break;
- default:
- return AE_ERROR;
- }
- return wmid3_get_device_status(value, device);
-
- } else {
- return get_u32(value, cap);
- }
-}
-
-static acpi_status wmid3_set_device_status(u32 value, u16 device)
-{
- struct wmid3_gds_return_value return_value;
- acpi_status status;
- union acpi_object *obj;
- u16 devices;
- struct wmid3_gds_input_param params = {
- .function_num = 0x1,
- .hotkey_number = 0x01,
- .devices = ACER_WMID3_GDS_WIRELESS |
- ACER_WMID3_GDS_THREEG |
- ACER_WMID3_GDS_WIMAX |
- ACER_WMID3_GDS_BLUETOOTH,
- };
- struct acpi_buffer input = {
- sizeof(struct wmid3_gds_input_param),
- ¶ms
- };
- struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer output2 = { ACPI_ALLOCATE_BUFFER, NULL };
-
- status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output);
- if (ACPI_FAILURE(status))
- return status;
-
- obj = output.pointer;
-
- if (!obj)
- return AE_ERROR;
- else if (obj->type != ACPI_TYPE_BUFFER) {
- kfree(obj);
- return AE_ERROR;
- }
- if (obj->buffer.length != 8) {
- pr_warning("Unknown buffer length %d\n", obj->buffer.length);
- kfree(obj);
- return AE_ERROR;
- }
-
- return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
- kfree(obj);
-
- if (return_value.error_code || return_value.ec_return_value) {
- pr_warning("Get Current Device Status failed: "
- "0x%x - 0x%x\n", return_value.error_code,
- return_value.ec_return_value);
- return status;
- }
-
- devices = return_value.devices;
- params.function_num = 0x2;
- params.hotkey_number = 0x01;
- params.devices = (value) ? (devices | device) : (devices & ~device);
-
- status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output2);
- if (ACPI_FAILURE(status))
- return status;
-
- obj = output2.pointer;
-
- if (!obj)
- return AE_ERROR;
- else if (obj->type != ACPI_TYPE_BUFFER) {
- kfree(obj);
- return AE_ERROR;
- }
- if (obj->buffer.length != 4) {
- pr_warning("Unknown buffer length %d\n", obj->buffer.length);
- kfree(obj);
- return AE_ERROR;
- }
-
- return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
- kfree(obj);
-
- if (return_value.error_code || return_value.ec_return_value)
- pr_warning("Set Device Status failed: "
- "0x%x - 0x%x\n", return_value.error_code,
- return_value.ec_return_value);
-
- return status;
-}
-
-static acpi_status set_device_status(u32 value, u32 cap)
-{
- if (wmi_has_guid(WMID_GUID3)) {
- u16 device;
-
- switch (cap) {
- case ACER_CAP_WIRELESS:
- device = ACER_WMID3_GDS_WIRELESS;
- break;
- case ACER_CAP_BLUETOOTH:
- device = ACER_WMID3_GDS_BLUETOOTH;
- break;
- case ACER_CAP_THREEG:
- device = ACER_WMID3_GDS_THREEG;
- break;
- default:
- return AE_ERROR;
- }
- return wmid3_set_device_status(value, device);
-
- } else {
- return set_u32(value, cap);
- }
-}
-
/*
* Rfkill devices
*/
@@ -1285,12 +1300,13 @@
u32 state;
acpi_status status;
- status = get_u32(&state, ACER_CAP_WIRELESS);
- if (ACPI_SUCCESS(status)) {
- if (quirks->wireless == 3) {
- rfkill_set_hw_state(wireless_rfkill, !state);
- } else {
- rfkill_set_sw_state(wireless_rfkill, !state);
+ if (has_cap(ACER_CAP_WIRELESS)) {
+ status = get_u32(&state, ACER_CAP_WIRELESS);
+ if (ACPI_SUCCESS(status)) {
+ if (quirks->wireless == 3)
+ rfkill_set_hw_state(wireless_rfkill, !state);
+ else
+ rfkill_set_sw_state(wireless_rfkill, !state);
}
}
@@ -1301,8 +1317,7 @@
}
if (has_cap(ACER_CAP_THREEG) && wmi_has_guid(WMID_GUID3)) {
- status = wmid3_get_device_status(&state,
- ACER_WMID3_GDS_THREEG);
+ status = get_u32(&state, ACER_WMID3_GDS_THREEG);
if (ACPI_SUCCESS(status))
rfkill_set_sw_state(threeg_rfkill, !state);
}
@@ -1316,7 +1331,7 @@
u32 cap = (unsigned long)data;
if (rfkill_inited) {
- status = set_device_status(!blocked, cap);
+ status = set_u32(!blocked, cap);
if (ACPI_FAILURE(status))
return -ENODEV;
}
@@ -1343,7 +1358,7 @@
if (!rfkill_dev)
return ERR_PTR(-ENOMEM);
- status = get_device_status(&state, cap);
+ status = get_u32(&state, cap);
err = rfkill_register(rfkill_dev);
if (err) {
@@ -1359,19 +1374,24 @@
static int acer_rfkill_init(struct device *dev)
{
- wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
- "acer-wireless", ACER_CAP_WIRELESS);
- if (IS_ERR(wireless_rfkill))
- return PTR_ERR(wireless_rfkill);
+ int err;
+
+ if (has_cap(ACER_CAP_WIRELESS)) {
+ wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
+ "acer-wireless", ACER_CAP_WIRELESS);
+ if (IS_ERR(wireless_rfkill)) {
+ err = PTR_ERR(wireless_rfkill);
+ goto error_wireless;
+ }
+ }
if (has_cap(ACER_CAP_BLUETOOTH)) {
bluetooth_rfkill = acer_rfkill_register(dev,
RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
ACER_CAP_BLUETOOTH);
if (IS_ERR(bluetooth_rfkill)) {
- rfkill_unregister(wireless_rfkill);
- rfkill_destroy(wireless_rfkill);
- return PTR_ERR(bluetooth_rfkill);
+ err = PTR_ERR(bluetooth_rfkill);
+ goto error_bluetooth;
}
}
@@ -1380,30 +1400,44 @@
RFKILL_TYPE_WWAN, "acer-threeg",
ACER_CAP_THREEG);
if (IS_ERR(threeg_rfkill)) {
- rfkill_unregister(wireless_rfkill);
- rfkill_destroy(wireless_rfkill);
- rfkill_unregister(bluetooth_rfkill);
- rfkill_destroy(bluetooth_rfkill);
- return PTR_ERR(threeg_rfkill);
+ err = PTR_ERR(threeg_rfkill);
+ goto error_threeg;
}
}
rfkill_inited = true;
- if (ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID))
+ if ((ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID)) &&
+ has_cap(ACER_CAP_WIRELESS | ACER_CAP_BLUETOOTH | ACER_CAP_THREEG))
schedule_delayed_work(&acer_rfkill_work,
round_jiffies_relative(HZ));
return 0;
+
+error_threeg:
+ if (has_cap(ACER_CAP_BLUETOOTH)) {
+ rfkill_unregister(bluetooth_rfkill);
+ rfkill_destroy(bluetooth_rfkill);
+ }
+error_bluetooth:
+ if (has_cap(ACER_CAP_WIRELESS)) {
+ rfkill_unregister(wireless_rfkill);
+ rfkill_destroy(wireless_rfkill);
+ }
+error_wireless:
+ return err;
}
static void acer_rfkill_exit(void)
{
- if (ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID))
+ if ((ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID)) &&
+ has_cap(ACER_CAP_WIRELESS | ACER_CAP_BLUETOOTH | ACER_CAP_THREEG))
cancel_delayed_work_sync(&acer_rfkill_work);
- rfkill_unregister(wireless_rfkill);
- rfkill_destroy(wireless_rfkill);
+ if (has_cap(ACER_CAP_WIRELESS)) {
+ rfkill_unregister(wireless_rfkill);
+ rfkill_destroy(wireless_rfkill);
+ }
if (has_cap(ACER_CAP_BLUETOOTH)) {
rfkill_unregister(bluetooth_rfkill);
@@ -1428,11 +1462,7 @@
pr_info("This threeg sysfs will be removed in 2012"
" - used by: %s\n", current->comm);
- if (wmi_has_guid(WMID_GUID3))
- status = wmid3_get_device_status(&result,
- ACER_WMID3_GDS_THREEG);
- else
- status = get_u32(&result, ACER_CAP_THREEG);
+ status = get_u32(&result, ACER_CAP_THREEG);
if (ACPI_SUCCESS(status))
return sprintf(buf, "%u\n", result);
return sprintf(buf, "Read error\n");
@@ -1464,6 +1494,8 @@
return sprintf(buf, "AMW0 v2\n");
case ACER_WMID:
return sprintf(buf, "WMID\n");
+ case ACER_WMID_v2:
+ return sprintf(buf, "WMID v2\n");
default:
return sprintf(buf, "Error!\n");
}
@@ -1883,12 +1915,20 @@
if (!wmi_has_guid(AMW0_GUID1) && wmi_has_guid(WMID_GUID1))
interface = &wmid_interface;
+ if (wmi_has_guid(WMID_GUID3))
+ interface = &wmid_v2_interface;
+
+ if (interface)
+ dmi_walk(type_aa_dmi_decode, NULL);
+
if (wmi_has_guid(WMID_GUID2) && interface) {
- if (ACPI_FAILURE(WMID_set_capabilities())) {
+ if (!has_type_aa && ACPI_FAILURE(WMID_set_capabilities())) {
pr_err("Unable to detect available WMID devices\n");
return -ENODEV;
}
- } else if (!wmi_has_guid(WMID_GUID2) && interface) {
+ /* WMID always provides brightness methods */
+ interface->capability |= ACER_CAP_BRIGHTNESS;
+ } else if (!wmi_has_guid(WMID_GUID2) && interface && !has_type_aa) {
pr_err("No WMID device detection method found\n");
return -ENODEV;
}
@@ -1912,7 +1952,7 @@
set_quirks();
- if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+ if (acpi_video_backlight_support()) {
interface->capability &= ~ACER_CAP_BRIGHTNESS;
pr_info("Brightness must be controlled by "
"generic video driver\n");
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index fa6d7ec..edaccad9 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
* Copyright (C) 2006-2007 Corentin Chary
+ * Copyright (C) 2011 Wind River Systems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -48,6 +49,7 @@
#include <linux/uaccess.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
+#include <linux/input-polldev.h>
#include <linux/rfkill.h>
#include <linux/slab.h>
#include <linux/dmi.h>
@@ -83,26 +85,32 @@
static int bluetooth_status = 1;
static int wimax_status = -1;
static int wwan_status = -1;
+static int als_status;
module_param(wlan_status, int, 0444);
MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
- "default is 1");
+ "default is -1");
module_param(bluetooth_status, int, 0444);
MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
- "default is 1");
+ "default is -1");
module_param(wimax_status, int, 0444);
MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
- "default is 1");
+ "default is -1");
module_param(wwan_status, int, 0444);
MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
- "default is 1");
+ "default is -1");
+
+module_param(als_status, int, 0444);
+MODULE_PARM_DESC(als_status, "Set the ALS status on boot "
+ "(0 = disabled, 1 = enabled). "
+ "default is 0");
/*
* Some events we use, same for all Asus
@@ -173,6 +181,29 @@
#define METHOD_KBD_LIGHT_SET "SLKB"
#define METHOD_KBD_LIGHT_GET "GLKB"
+/* For Pegatron Lucid tablet */
+#define DEVICE_NAME_PEGA "Lucid"
+
+#define METHOD_PEGA_ENABLE "ENPR"
+#define METHOD_PEGA_DISABLE "DAPR"
+#define PEGA_WLAN 0x00
+#define PEGA_BLUETOOTH 0x01
+#define PEGA_WWAN 0x02
+#define PEGA_ALS 0x04
+#define PEGA_ALS_POWER 0x05
+
+#define METHOD_PEGA_READ "RDLN"
+#define PEGA_READ_ALS_H 0x02
+#define PEGA_READ_ALS_L 0x03
+
+#define PEGA_ACCEL_NAME "pega_accel"
+#define PEGA_ACCEL_DESC "Pegatron Lucid Tablet Accelerometer"
+#define METHOD_XLRX "XLRX"
+#define METHOD_XLRY "XLRY"
+#define METHOD_XLRZ "XLRZ"
+#define PEGA_ACC_CLAMP 512 /* 1G accel is reported as ~256, so clamp to 2G */
+#define PEGA_ACC_RETRIES 3
+
/*
* Define a specific led structure to keep the main structure clean
*/
@@ -185,6 +216,15 @@
};
/*
+ * Same thing for rfkill
+ */
+struct asus_pega_rfkill {
+ int control_id; /* type of control. Maps to PEGA_* values */
+ struct rfkill *rfkill;
+ struct asus_laptop *asus;
+};
+
+/*
* This is the main structure, we can use it to store anything interesting
* about the hotk device
*/
@@ -198,6 +238,7 @@
struct input_dev *inputdev;
struct key_entry *keymap;
+ struct input_polled_dev *pega_accel_poll;
struct asus_led mled;
struct asus_led tled;
@@ -209,9 +250,18 @@
int wireless_status;
bool have_rsts;
+ bool is_pega_lucid;
+ bool pega_acc_live;
+ int pega_acc_x;
+ int pega_acc_y;
+ int pega_acc_z;
struct rfkill *gps_rfkill;
+ struct asus_pega_rfkill wlanrfk;
+ struct asus_pega_rfkill btrfk;
+ struct asus_pega_rfkill wwanrfk;
+
acpi_handle handle; /* the handle of the hotk device */
u32 ledd_status; /* status of the LED display */
u8 light_level; /* light sensor level */
@@ -323,6 +373,127 @@
return 0;
}
+static bool asus_check_pega_lucid(struct asus_laptop *asus)
+{
+ return !strcmp(asus->name, DEVICE_NAME_PEGA) &&
+ !acpi_check_handle(asus->handle, METHOD_PEGA_ENABLE, NULL) &&
+ !acpi_check_handle(asus->handle, METHOD_PEGA_DISABLE, NULL) &&
+ !acpi_check_handle(asus->handle, METHOD_PEGA_READ, NULL);
+}
+
+static int asus_pega_lucid_set(struct asus_laptop *asus, int unit, bool enable)
+{
+ char *method = enable ? METHOD_PEGA_ENABLE : METHOD_PEGA_DISABLE;
+ return write_acpi_int(asus->handle, method, unit);
+}
+
+static int pega_acc_axis(struct asus_laptop *asus, int curr, char *method)
+{
+ int i, delta;
+ unsigned long long val;
+ for (i = 0; i < PEGA_ACC_RETRIES; i++) {
+ acpi_evaluate_integer(asus->handle, method, NULL, &val);
+
+ /* The output is noisy. From reading the ASL
+ * dissassembly, timeout errors are returned with 1's
+ * in the high word, and the lack of locking around
+ * thei hi/lo byte reads means that a transition
+ * between (for example) -1 and 0 could be read as
+ * 0xff00 or 0x00ff. */
+ delta = abs(curr - (short)val);
+ if (delta < 128 && !(val & ~0xffff))
+ break;
+ }
+ return clamp_val((short)val, -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP);
+}
+
+static void pega_accel_poll(struct input_polled_dev *ipd)
+{
+ struct device *parent = ipd->input->dev.parent;
+ struct asus_laptop *asus = dev_get_drvdata(parent);
+
+ /* In some cases, the very first call to poll causes a
+ * recursive fault under the polldev worker. This is
+ * apparently related to very early userspace access to the
+ * device, and perhaps a firmware bug. Fake the first report. */
+ if (!asus->pega_acc_live) {
+ asus->pega_acc_live = true;
+ input_report_abs(ipd->input, ABS_X, 0);
+ input_report_abs(ipd->input, ABS_Y, 0);
+ input_report_abs(ipd->input, ABS_Z, 0);
+ input_sync(ipd->input);
+ return;
+ }
+
+ asus->pega_acc_x = pega_acc_axis(asus, asus->pega_acc_x, METHOD_XLRX);
+ asus->pega_acc_y = pega_acc_axis(asus, asus->pega_acc_y, METHOD_XLRY);
+ asus->pega_acc_z = pega_acc_axis(asus, asus->pega_acc_z, METHOD_XLRZ);
+
+ /* Note transform, convert to "right/up/out" in the native
+ * landscape orientation (i.e. the vector is the direction of
+ * "real up" in the device's cartiesian coordinates). */
+ input_report_abs(ipd->input, ABS_X, -asus->pega_acc_x);
+ input_report_abs(ipd->input, ABS_Y, -asus->pega_acc_y);
+ input_report_abs(ipd->input, ABS_Z, asus->pega_acc_z);
+ input_sync(ipd->input);
+}
+
+static void pega_accel_exit(struct asus_laptop *asus)
+{
+ if (asus->pega_accel_poll) {
+ input_unregister_polled_device(asus->pega_accel_poll);
+ input_free_polled_device(asus->pega_accel_poll);
+ }
+ asus->pega_accel_poll = NULL;
+}
+
+static int pega_accel_init(struct asus_laptop *asus)
+{
+ int err;
+ struct input_polled_dev *ipd;
+
+ if (!asus->is_pega_lucid)
+ return -ENODEV;
+
+ if (acpi_check_handle(asus->handle, METHOD_XLRX, NULL) ||
+ acpi_check_handle(asus->handle, METHOD_XLRY, NULL) ||
+ acpi_check_handle(asus->handle, METHOD_XLRZ, NULL))
+ return -ENODEV;
+
+ ipd = input_allocate_polled_device();
+ if (!ipd)
+ return -ENOMEM;
+
+ ipd->poll = pega_accel_poll;
+ ipd->poll_interval = 125;
+ ipd->poll_interval_min = 50;
+ ipd->poll_interval_max = 2000;
+
+ ipd->input->name = PEGA_ACCEL_DESC;
+ ipd->input->phys = PEGA_ACCEL_NAME "/input0";
+ ipd->input->dev.parent = &asus->platform_device->dev;
+ ipd->input->id.bustype = BUS_HOST;
+
+ set_bit(EV_ABS, ipd->input->evbit);
+ input_set_abs_params(ipd->input, ABS_X,
+ -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0);
+ input_set_abs_params(ipd->input, ABS_Y,
+ -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0);
+ input_set_abs_params(ipd->input, ABS_Z,
+ -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0);
+
+ err = input_register_polled_device(ipd);
+ if (err)
+ goto exit;
+
+ asus->pega_accel_poll = ipd;
+ return 0;
+
+exit:
+ input_free_polled_device(ipd);
+ return err;
+}
+
/* Generic LED function */
static int asus_led_set(struct asus_laptop *asus, const char *method,
int value)
@@ -430,17 +601,17 @@
static void asus_led_exit(struct asus_laptop *asus)
{
- if (asus->mled.led.dev)
+ if (!IS_ERR_OR_NULL(asus->mled.led.dev))
led_classdev_unregister(&asus->mled.led);
- if (asus->tled.led.dev)
+ if (!IS_ERR_OR_NULL(asus->tled.led.dev))
led_classdev_unregister(&asus->tled.led);
- if (asus->pled.led.dev)
+ if (!IS_ERR_OR_NULL(asus->pled.led.dev))
led_classdev_unregister(&asus->pled.led);
- if (asus->rled.led.dev)
+ if (!IS_ERR_OR_NULL(asus->rled.led.dev))
led_classdev_unregister(&asus->rled.led);
- if (asus->gled.led.dev)
+ if (!IS_ERR_OR_NULL(asus->gled.led.dev))
led_classdev_unregister(&asus->gled.led);
- if (asus->kled.led.dev)
+ if (!IS_ERR_OR_NULL(asus->kled.led.dev))
led_classdev_unregister(&asus->kled.led);
if (asus->led_workqueue) {
destroy_workqueue(asus->led_workqueue);
@@ -474,6 +645,13 @@
int r;
/*
+ * The Pegatron Lucid has no physical leds, but all methods are
+ * available in the DSDT...
+ */
+ if (asus->is_pega_lucid)
+ return 0;
+
+ /*
* Functions that actually update the LED's are called from a
* workqueue. By doing this as separate work rather than when the LED
* subsystem asks, we avoid messing with the Asus ACPI stuff during a
@@ -907,8 +1085,18 @@
*/
static void asus_als_switch(struct asus_laptop *asus, int value)
{
- if (write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value))
- pr_warn("Error setting light sensor switch\n");
+ int ret;
+
+ if (asus->is_pega_lucid) {
+ ret = asus_pega_lucid_set(asus, PEGA_ALS, value);
+ if (!ret)
+ ret = asus_pega_lucid_set(asus, PEGA_ALS_POWER, value);
+ } else {
+ ret = write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value);
+ }
+ if (ret)
+ pr_warning("Error setting light sensor switch\n");
+
asus->light_switch = value;
}
@@ -964,6 +1152,35 @@
return rv;
}
+static int pega_int_read(struct asus_laptop *asus, int arg, int *result)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ int err = write_acpi_int_ret(asus->handle, METHOD_PEGA_READ, arg,
+ &buffer);
+ if (!err) {
+ union acpi_object *obj = buffer.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER)
+ *result = obj->integer.value;
+ else
+ err = -EIO;
+ }
+ return err;
+}
+
+static ssize_t show_lsvalue(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+ int err, hi, lo;
+
+ err = pega_int_read(asus, PEGA_READ_ALS_H, &hi);
+ if (!err)
+ err = pega_int_read(asus, PEGA_READ_ALS_L, &lo);
+ if (!err)
+ return sprintf(buf, "%d\n", 10 * hi + lo);
+ return err;
+}
+
/*
* GPS
*/
@@ -1062,6 +1279,86 @@
return result;
}
+static int pega_rfkill_set(void *data, bool blocked)
+{
+ struct asus_pega_rfkill *pega_rfk = data;
+
+ int ret = asus_pega_lucid_set(pega_rfk->asus, pega_rfk->control_id, !blocked);
+ pr_warn("Setting rfkill %d, to %d; returned %d\n", pega_rfk->control_id, !blocked, ret);
+
+ return ret;
+}
+
+static const struct rfkill_ops pega_rfkill_ops = {
+ .set_block = pega_rfkill_set,
+};
+
+static void pega_rfkill_terminate(struct asus_pega_rfkill *pega_rfk)
+{
+ pr_warn("Terminating %d\n", pega_rfk->control_id);
+ if (pega_rfk->rfkill) {
+ rfkill_unregister(pega_rfk->rfkill);
+ rfkill_destroy(pega_rfk->rfkill);
+ pega_rfk->rfkill = NULL;
+ }
+}
+
+static void pega_rfkill_exit(struct asus_laptop *asus)
+{
+ pega_rfkill_terminate(&asus->wwanrfk);
+ pega_rfkill_terminate(&asus->btrfk);
+ pega_rfkill_terminate(&asus->wlanrfk);
+}
+
+static int pega_rfkill_setup(struct asus_laptop *asus, struct asus_pega_rfkill *pega_rfk,
+ const char *name, int controlid, int rfkill_type)
+{
+ int result;
+
+ pr_warn("Setting up rfk %s, control %d, type %d\n", name, controlid, rfkill_type);
+ pega_rfk->control_id = controlid;
+ pega_rfk->asus = asus;
+ pega_rfk->rfkill = rfkill_alloc(name, &asus->platform_device->dev,
+ rfkill_type, &pega_rfkill_ops, pega_rfk);
+ if (!pega_rfk->rfkill)
+ return -EINVAL;
+
+ result = rfkill_register(pega_rfk->rfkill);
+ if (result) {
+ rfkill_destroy(pega_rfk->rfkill);
+ pega_rfk->rfkill = NULL;
+ }
+
+ return result;
+}
+
+static int pega_rfkill_init(struct asus_laptop *asus)
+{
+ int ret = 0;
+
+ if(!asus->is_pega_lucid)
+ return -ENODEV;
+
+ ret = pega_rfkill_setup(asus, &asus->wlanrfk, "pega-wlan", PEGA_WLAN, RFKILL_TYPE_WLAN);
+ if(ret)
+ return ret;
+ ret = pega_rfkill_setup(asus, &asus->btrfk, "pega-bt", PEGA_BLUETOOTH, RFKILL_TYPE_BLUETOOTH);
+ if(ret)
+ goto err_btrfk;
+ ret = pega_rfkill_setup(asus, &asus->wwanrfk, "pega-wwan", PEGA_WWAN, RFKILL_TYPE_WWAN);
+ if(ret)
+ goto err_wwanrfk;
+
+ pr_warn("Pega rfkill init succeeded\n");
+ return 0;
+err_wwanrfk:
+ pega_rfkill_terminate(&asus->btrfk);
+err_btrfk:
+ pega_rfkill_terminate(&asus->wlanrfk);
+
+ return ret;
+}
+
/*
* Input device (i.e. hotkeys)
*/
@@ -1141,6 +1438,14 @@
}
return ;
}
+
+ /* Accelerometer "coarse orientation change" event */
+ if (asus->pega_accel_poll && event == 0xEA) {
+ kobject_uevent(&asus->pega_accel_poll->input->dev.kobj,
+ KOBJ_CHANGE);
+ return ;
+ }
+
asus_input_notify(asus, event);
}
@@ -1152,6 +1457,7 @@
static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan);
static DEVICE_ATTR(display, S_IWUSR, NULL, store_disp);
static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd);
+static DEVICE_ATTR(ls_value, S_IRUGO, show_lsvalue, NULL);
static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl);
static DEVICE_ATTR(ls_switch, S_IRUGO | S_IWUSR, show_lssw, store_lssw);
static DEVICE_ATTR(gps, S_IRUGO | S_IWUSR, show_gps, store_gps);
@@ -1164,6 +1470,7 @@
&dev_attr_wwan.attr,
&dev_attr_display.attr,
&dev_attr_ledd.attr,
+ &dev_attr_ls_value.attr,
&dev_attr_ls_level.attr,
&dev_attr_ls_switch.attr,
&dev_attr_gps.attr,
@@ -1180,6 +1487,19 @@
acpi_handle handle = asus->handle;
bool supported;
+ if (asus->is_pega_lucid) {
+ /* no ls_level interface on the Lucid */
+ if (attr == &dev_attr_ls_switch.attr)
+ supported = true;
+ else if (attr == &dev_attr_ls_level.attr)
+ supported = false;
+ else
+ goto normal;
+
+ return supported;
+ }
+
+normal:
if (attr == &dev_attr_wlan.attr) {
supported = !acpi_check_handle(handle, METHOD_WLAN, NULL);
@@ -1202,8 +1522,9 @@
} else if (attr == &dev_attr_ls_switch.attr ||
attr == &dev_attr_ls_level.attr) {
supported = !acpi_check_handle(handle, METHOD_ALS_CONTROL, NULL) &&
- !acpi_check_handle(handle, METHOD_ALS_LEVEL, NULL);
-
+ !acpi_check_handle(handle, METHOD_ALS_LEVEL, NULL);
+ } else if (attr == &dev_attr_ls_value.attr) {
+ supported = asus->is_pega_lucid;
} else if (attr == &dev_attr_gps.attr) {
supported = !acpi_check_handle(handle, METHOD_GPS_ON, NULL) &&
!acpi_check_handle(handle, METHOD_GPS_OFF, NULL) &&
@@ -1258,7 +1579,7 @@
.driver = {
.name = ASUS_LAPTOP_FILE,
.owner = THIS_MODULE,
- }
+ },
};
/*
@@ -1388,11 +1709,13 @@
asus->ledd_status = 0xFFF;
/* Set initial values of light sensor and level */
- asus->light_switch = 0; /* Default to light sensor disabled */
+ asus->light_switch = !!als_status;
asus->light_level = 5; /* level 5 for sensor sensitivity */
- if (!acpi_check_handle(asus->handle, METHOD_ALS_CONTROL, NULL) &&
- !acpi_check_handle(asus->handle, METHOD_ALS_LEVEL, NULL)) {
+ if (asus->is_pega_lucid) {
+ asus_als_switch(asus, asus->light_switch);
+ } else if (!acpi_check_handle(asus->handle, METHOD_ALS_CONTROL, NULL) &&
+ !acpi_check_handle(asus->handle, METHOD_ALS_LEVEL, NULL)) {
asus_als_switch(asus, asus->light_switch);
asus_als_level(asus, asus->light_level);
}
@@ -1439,9 +1762,10 @@
goto fail_platform;
/*
- * Register the platform device first. It is used as a parent for the
- * sub-devices below.
+ * Need platform type detection first, then the platform
+ * device. It is used as a parent for the sub-devices below.
*/
+ asus->is_pega_lucid = asus_check_pega_lucid(asus);
result = asus_platform_init(asus);
if (result)
goto fail_platform;
@@ -1465,9 +1789,21 @@
if (result)
goto fail_rfkill;
+ result = pega_accel_init(asus);
+ if (result && result != -ENODEV)
+ goto fail_pega_accel;
+
+ result = pega_rfkill_init(asus);
+ if (result && result != -ENODEV)
+ goto fail_pega_rfkill;
+
asus_device_present = true;
return 0;
+fail_pega_rfkill:
+ pega_accel_exit(asus);
+fail_pega_accel:
+ asus_rfkill_exit(asus);
fail_rfkill:
asus_led_exit(asus);
fail_led:
@@ -1491,6 +1827,8 @@
asus_rfkill_exit(asus);
asus_led_exit(asus);
asus_input_exit(asus);
+ pega_accel_exit(asus);
+ pega_rfkill_exit(asus);
asus_platform_exit(asus);
kfree(asus->name);
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 95cba9e..d1049ee 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -453,7 +453,9 @@
static void asus_wmi_led_exit(struct asus_wmi *asus)
{
- if (asus->tpd_led.dev)
+ if (!IS_ERR_OR_NULL(asus->kbd_led.dev))
+ led_classdev_unregister(&asus->kbd_led);
+ if (!IS_ERR_OR_NULL(asus->tpd_led.dev))
led_classdev_unregister(&asus->tpd_led);
if (asus->led_workqueue)
destroy_workqueue(asus->led_workqueue);
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index f31fa4e..a43cfd9 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -60,6 +60,22 @@
struct calling_interface_token tokens[];
} __packed;
+struct quirk_entry {
+ u8 touchpad_led;
+};
+
+static struct quirk_entry *quirks;
+
+static struct quirk_entry quirk_dell_vostro_v130 = {
+ .touchpad_led = 1,
+};
+
+static int dmi_matched(const struct dmi_system_id *dmi)
+{
+ quirks = dmi->driver_data;
+ return 1;
+}
+
static int da_command_address;
static int da_command_code;
static int da_num_tokens;
@@ -149,6 +165,27 @@
{}
};
+static struct dmi_system_id __devinitdata dell_quirks[] = {
+ {
+ .callback = dmi_matched,
+ .ident = "Dell Vostro V130",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V130"),
+ },
+ .driver_data = &quirk_dell_vostro_v130,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "Dell Vostro V131",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V131"),
+ },
+ .driver_data = &quirk_dell_vostro_v130,
+ },
+};
+
static struct calling_interface_buffer *buffer;
static struct page *bufferpage;
static DEFINE_MUTEX(buffer_mutex);
@@ -552,6 +589,44 @@
.update_status = dell_send_intensity,
};
+static void touchpad_led_on()
+{
+ int command = 0x97;
+ char data = 1;
+ i8042_command(&data, command | 1 << 12);
+}
+
+static void touchpad_led_off()
+{
+ int command = 0x97;
+ char data = 2;
+ i8042_command(&data, command | 1 << 12);
+}
+
+static void touchpad_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value > 0)
+ touchpad_led_on();
+ else
+ touchpad_led_off();
+}
+
+static struct led_classdev touchpad_led = {
+ .name = "dell-laptop::touchpad",
+ .brightness_set = touchpad_led_set,
+};
+
+static int __devinit touchpad_led_init(struct device *dev)
+{
+ return led_classdev_register(dev, &touchpad_led);
+}
+
+static void touchpad_led_exit(void)
+{
+ led_classdev_unregister(&touchpad_led);
+}
+
static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
struct serio *port)
{
@@ -584,6 +659,10 @@
if (!dmi_check_system(dell_device_table))
return -ENODEV;
+ quirks = NULL;
+ /* find if this machine support other functions */
+ dmi_check_system(dell_quirks);
+
dmi_walk(find_tokens, NULL);
if (!da_tokens) {
@@ -626,6 +705,9 @@
goto fail_filter;
}
+ if (quirks && quirks->touchpad_led)
+ touchpad_led_init(&platform_device->dev);
+
dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL);
if (dell_laptop_dir != NULL)
debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
@@ -692,6 +774,8 @@
static void __exit dell_exit(void)
{
debugfs_remove_recursive(dell_laptop_dir);
+ if (quirks && quirks->touchpad_led)
+ touchpad_led_exit();
i8042_remove_filter(dell_laptop_i8042_filter);
cancel_delayed_work_sync(&dell_rfkill_work);
backlight_device_unregister(dell_backlight_device);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 1c45d92..ea44abd 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -568,7 +568,7 @@
static void eeepc_led_exit(struct eeepc_laptop *eeepc)
{
- if (eeepc->tpd_led.dev)
+ if (!IS_ERR_OR_NULL(eeepc->tpd_led.dev))
led_classdev_unregister(&eeepc->tpd_led);
if (eeepc->led_workqueue)
destroy_workqueue(eeepc->led_workqueue);
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 1b52d00..22b2dfa 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -76,6 +76,7 @@
/* For automatic insertion of the module */
static struct acpi_device_id lis3lv02d_device_ids[] = {
{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
+ {"HPQ6000", 0}, /* HP Mobile Data Protection System PNP */
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
@@ -209,6 +210,8 @@
AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap),
+ AXIS_DMI_MATCH("NC854xx", "HP EliteBook 854", y_inverted),
+ AXIS_DMI_MATCH("NC273xx", "HP EliteBook 273", y_inverted),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
@@ -227,7 +230,12 @@
AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
AXIS_DMI_MATCH("HPB532x", "HP ProBook 532", y_inverted),
+ AXIS_DMI_MATCH("HPB655x", "HP ProBook 655", xy_swap_inverted),
AXIS_DMI_MATCH("Mini510x", "HP Mini 510", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("HPB63xx", "HP ProBook 63", xy_swap),
+ AXIS_DMI_MATCH("HPB64xx", "HP ProBook 64", xy_swap),
+ AXIS_DMI_MATCH("HPB64xx", "HP EliteBook 84", xy_swap),
+ AXIS_DMI_MATCH("HPB65xx", "HP ProBook 65", x_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
@@ -320,7 +328,7 @@
INIT_WORK(&hpled_led.work, delayed_set_status_worker);
ret = led_classdev_register(NULL, &hpled_led.led_classdev);
if (ret) {
- lis3lv02d_joystick_disable();
+ lis3lv02d_joystick_disable(&lis3_dev);
lis3lv02d_poweroff(&lis3_dev);
flush_work(&hpled_led.work);
return ret;
@@ -334,7 +342,7 @@
if (!device)
return -EINVAL;
- lis3lv02d_joystick_disable();
+ lis3lv02d_joystick_disable(&lis3_dev);
lis3lv02d_poweroff(&lis3_dev);
led_classdev_unregister(&hpled_led.led_classdev);
@@ -354,8 +362,7 @@
static int lis3lv02d_resume(struct acpi_device *device)
{
- lis3lv02d_poweron(&lis3_dev);
- return 0;
+ return lis3lv02d_poweron(&lis3_dev);
}
#else
#define lis3lv02d_suspend NULL
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 0c59541..a36addf 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -34,6 +34,8 @@
#include <linux/input/sparse-keymap.h>
#include <linux/backlight.h>
#include <linux/fb.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#define IDEAPAD_RFKILL_DEV_NUM (3)
@@ -42,15 +44,41 @@
#define CFG_WIFI_BIT (18)
#define CFG_CAMERA_BIT (19)
+enum {
+ VPCCMD_R_VPC1 = 0x10,
+ VPCCMD_R_BL_MAX,
+ VPCCMD_R_BL,
+ VPCCMD_W_BL,
+ VPCCMD_R_WIFI,
+ VPCCMD_W_WIFI,
+ VPCCMD_R_BT,
+ VPCCMD_W_BT,
+ VPCCMD_R_BL_POWER,
+ VPCCMD_R_NOVO,
+ VPCCMD_R_VPC2,
+ VPCCMD_R_TOUCHPAD,
+ VPCCMD_W_TOUCHPAD,
+ VPCCMD_R_CAMERA,
+ VPCCMD_W_CAMERA,
+ VPCCMD_R_3G,
+ VPCCMD_W_3G,
+ VPCCMD_R_ODD, /* 0x21 */
+ VPCCMD_R_RF = 0x23,
+ VPCCMD_W_RF,
+ VPCCMD_W_BL_POWER = 0x33,
+};
+
struct ideapad_private {
struct rfkill *rfk[IDEAPAD_RFKILL_DEV_NUM];
struct platform_device *platform_device;
struct input_dev *inputdev;
struct backlight_device *blightdev;
+ struct dentry *debug;
unsigned long cfg;
};
static acpi_handle ideapad_handle;
+static struct ideapad_private *ideapad_priv;
static bool no_bt_rfkill;
module_param(no_bt_rfkill, bool, 0444);
MODULE_PARM_DESC(no_bt_rfkill, "No rfkill for bluetooth.");
@@ -164,6 +192,146 @@
}
/*
+ * debugfs
+ */
+#define DEBUGFS_EVENT_LEN (4096)
+static int debugfs_status_show(struct seq_file *s, void *data)
+{
+ unsigned long value;
+
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_BL_MAX, &value))
+ seq_printf(s, "Backlight max:\t%lu\n", value);
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_BL, &value))
+ seq_printf(s, "Backlight now:\t%lu\n", value);
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_BL_POWER, &value))
+ seq_printf(s, "BL power value:\t%s\n", value ? "On" : "Off");
+ seq_printf(s, "=====================\n");
+
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_RF, &value))
+ seq_printf(s, "Radio status:\t%s(%lu)\n",
+ value ? "On" : "Off", value);
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_WIFI, &value))
+ seq_printf(s, "Wifi status:\t%s(%lu)\n",
+ value ? "On" : "Off", value);
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_BT, &value))
+ seq_printf(s, "BT status:\t%s(%lu)\n",
+ value ? "On" : "Off", value);
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_3G, &value))
+ seq_printf(s, "3G status:\t%s(%lu)\n",
+ value ? "On" : "Off", value);
+ seq_printf(s, "=====================\n");
+
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_TOUCHPAD, &value))
+ seq_printf(s, "Touchpad status:%s(%lu)\n",
+ value ? "On" : "Off", value);
+ if (!read_ec_data(ideapad_handle, VPCCMD_R_CAMERA, &value))
+ seq_printf(s, "Camera status:\t%s(%lu)\n",
+ value ? "On" : "Off", value);
+
+ return 0;
+}
+
+static int debugfs_status_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, debugfs_status_show, NULL);
+}
+
+static const struct file_operations debugfs_status_fops = {
+ .owner = THIS_MODULE,
+ .open = debugfs_status_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int debugfs_cfg_show(struct seq_file *s, void *data)
+{
+ if (!ideapad_priv) {
+ seq_printf(s, "cfg: N/A\n");
+ } else {
+ seq_printf(s, "cfg: 0x%.8lX\n\nCapability: ",
+ ideapad_priv->cfg);
+ if (test_bit(CFG_BT_BIT, &ideapad_priv->cfg))
+ seq_printf(s, "Bluetooth ");
+ if (test_bit(CFG_3G_BIT, &ideapad_priv->cfg))
+ seq_printf(s, "3G ");
+ if (test_bit(CFG_WIFI_BIT, &ideapad_priv->cfg))
+ seq_printf(s, "Wireless ");
+ if (test_bit(CFG_CAMERA_BIT, &ideapad_priv->cfg))
+ seq_printf(s, "Camera ");
+ seq_printf(s, "\nGraphic: ");
+ switch ((ideapad_priv->cfg)&0x700) {
+ case 0x100:
+ seq_printf(s, "Intel");
+ break;
+ case 0x200:
+ seq_printf(s, "ATI");
+ break;
+ case 0x300:
+ seq_printf(s, "Nvidia");
+ break;
+ case 0x400:
+ seq_printf(s, "Intel and ATI");
+ break;
+ case 0x500:
+ seq_printf(s, "Intel and Nvidia");
+ break;
+ }
+ seq_printf(s, "\n");
+ }
+ return 0;
+}
+
+static int debugfs_cfg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, debugfs_cfg_show, NULL);
+}
+
+static const struct file_operations debugfs_cfg_fops = {
+ .owner = THIS_MODULE,
+ .open = debugfs_cfg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __devinit ideapad_debugfs_init(struct ideapad_private *priv)
+{
+ struct dentry *node;
+
+ priv->debug = debugfs_create_dir("ideapad", NULL);
+ if (priv->debug == NULL) {
+ pr_err("failed to create debugfs directory");
+ goto errout;
+ }
+
+ node = debugfs_create_file("cfg", S_IRUGO, priv->debug, NULL,
+ &debugfs_cfg_fops);
+ if (!node) {
+ pr_err("failed to create cfg in debugfs");
+ goto errout;
+ }
+
+ node = debugfs_create_file("status", S_IRUGO, priv->debug, NULL,
+ &debugfs_status_fops);
+ if (!node) {
+ pr_err("failed to create event in debugfs");
+ goto errout;
+ }
+
+ return 0;
+
+errout:
+ return -ENOMEM;
+}
+
+static void ideapad_debugfs_exit(struct ideapad_private *priv)
+{
+ debugfs_remove_recursive(priv->debug);
+ priv->debug = NULL;
+}
+
+/*
* sysfs
*/
static ssize_t show_ideapad_cam(struct device *dev,
@@ -172,7 +340,7 @@
{
unsigned long result;
- if (read_ec_data(ideapad_handle, 0x1D, &result))
+ if (read_ec_data(ideapad_handle, VPCCMD_R_CAMERA, &result))
return sprintf(buf, "-1\n");
return sprintf(buf, "%lu\n", result);
}
@@ -187,7 +355,7 @@
return 0;
if (sscanf(buf, "%i", &state) != 1)
return -EINVAL;
- ret = write_ec_cmd(ideapad_handle, 0x1E, state);
+ ret = write_ec_cmd(ideapad_handle, VPCCMD_W_CAMERA, state);
if (ret < 0)
return ret;
return count;
@@ -195,20 +363,8 @@
static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam);
-static ssize_t show_ideapad_cfg(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ideapad_private *priv = dev_get_drvdata(dev);
-
- return sprintf(buf, "0x%.8lX\n", priv->cfg);
-}
-
-static DEVICE_ATTR(cfg, 0444, show_ideapad_cfg, NULL);
-
static struct attribute *ideapad_attributes[] = {
&dev_attr_camera_power.attr,
- &dev_attr_cfg.attr,
NULL
};
@@ -244,9 +400,9 @@
};
const struct ideapad_rfk_data ideapad_rfk_data[] = {
- { "ideapad_wlan", CFG_WIFI_BIT, 0x15, RFKILL_TYPE_WLAN },
- { "ideapad_bluetooth", CFG_BT_BIT, 0x17, RFKILL_TYPE_BLUETOOTH },
- { "ideapad_3g", CFG_3G_BIT, 0x20, RFKILL_TYPE_WWAN },
+ { "ideapad_wlan", CFG_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN },
+ { "ideapad_bluetooth", CFG_BT_BIT, VPCCMD_W_BT, RFKILL_TYPE_BLUETOOTH },
+ { "ideapad_3g", CFG_3G_BIT, VPCCMD_W_3G, RFKILL_TYPE_WWAN },
};
static int ideapad_rfk_set(void *data, bool blocked)
@@ -260,13 +416,12 @@
.set_block = ideapad_rfk_set,
};
-static void ideapad_sync_rfk_state(struct acpi_device *adevice)
+static void ideapad_sync_rfk_state(struct ideapad_private *priv)
{
- struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
unsigned long hw_blocked;
int i;
- if (read_ec_data(ideapad_handle, 0x23, &hw_blocked))
+ if (read_ec_data(ideapad_handle, VPCCMD_R_RF, &hw_blocked))
return;
hw_blocked = !hw_blocked;
@@ -363,8 +518,10 @@
* input device
*/
static const struct key_entry ideapad_keymap[] = {
- { KE_KEY, 0x06, { KEY_SWITCHVIDEOMODE } },
- { KE_KEY, 0x0D, { KEY_WLAN } },
+ { KE_KEY, 6, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 13, { KEY_WLAN } },
+ { KE_KEY, 16, { KEY_PROG1 } },
+ { KE_KEY, 17, { KEY_PROG2 } },
{ KE_END, 0 },
};
@@ -419,6 +576,18 @@
sparse_keymap_report_event(priv->inputdev, scancode, 1, true);
}
+static void ideapad_input_novokey(struct ideapad_private *priv)
+{
+ unsigned long long_pressed;
+
+ if (read_ec_data(ideapad_handle, VPCCMD_R_NOVO, &long_pressed))
+ return;
+ if (long_pressed)
+ ideapad_input_report(priv, 17);
+ else
+ ideapad_input_report(priv, 16);
+}
+
/*
* backlight
*/
@@ -426,16 +595,17 @@
{
unsigned long now;
- if (read_ec_data(ideapad_handle, 0x12, &now))
+ if (read_ec_data(ideapad_handle, VPCCMD_R_BL, &now))
return -EIO;
return now;
}
static int ideapad_backlight_update_status(struct backlight_device *blightdev)
{
- if (write_ec_cmd(ideapad_handle, 0x13, blightdev->props.brightness))
+ if (write_ec_cmd(ideapad_handle, VPCCMD_W_BL,
+ blightdev->props.brightness))
return -EIO;
- if (write_ec_cmd(ideapad_handle, 0x33,
+ if (write_ec_cmd(ideapad_handle, VPCCMD_W_BL_POWER,
blightdev->props.power == FB_BLANK_POWERDOWN ? 0 : 1))
return -EIO;
@@ -453,11 +623,11 @@
struct backlight_properties props;
unsigned long max, now, power;
- if (read_ec_data(ideapad_handle, 0x11, &max))
+ if (read_ec_data(ideapad_handle, VPCCMD_R_BL_MAX, &max))
return -EIO;
- if (read_ec_data(ideapad_handle, 0x12, &now))
+ if (read_ec_data(ideapad_handle, VPCCMD_R_BL, &now))
return -EIO;
- if (read_ec_data(ideapad_handle, 0x18, &power))
+ if (read_ec_data(ideapad_handle, VPCCMD_R_BL_POWER, &power))
return -EIO;
memset(&props, 0, sizeof(struct backlight_properties));
@@ -493,7 +663,9 @@
unsigned long power;
struct backlight_device *blightdev = priv->blightdev;
- if (read_ec_data(ideapad_handle, 0x18, &power))
+ if (!blightdev)
+ return;
+ if (read_ec_data(ideapad_handle, VPCCMD_R_BL_POWER, &power))
return;
blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
}
@@ -504,7 +676,7 @@
/* if we control brightness via acpi video driver */
if (priv->blightdev == NULL) {
- read_ec_data(ideapad_handle, 0x12, &now);
+ read_ec_data(ideapad_handle, VPCCMD_R_BL, &now);
return;
}
@@ -533,6 +705,7 @@
if (!priv)
return -ENOMEM;
dev_set_drvdata(&adevice->dev, priv);
+ ideapad_priv = priv;
ideapad_handle = adevice->handle;
priv->cfg = cfg;
@@ -540,6 +713,10 @@
if (ret)
goto platform_failed;
+ ret = ideapad_debugfs_init(priv);
+ if (ret)
+ goto debugfs_failed;
+
ret = ideapad_input_init(priv);
if (ret)
goto input_failed;
@@ -550,7 +727,7 @@
else
priv->rfk[i] = NULL;
}
- ideapad_sync_rfk_state(adevice);
+ ideapad_sync_rfk_state(priv);
if (!acpi_video_backlight_support()) {
ret = ideapad_backlight_init(priv);
@@ -565,6 +742,8 @@
ideapad_unregister_rfkill(adevice, i);
ideapad_input_exit(priv);
input_failed:
+ ideapad_debugfs_exit(priv);
+debugfs_failed:
ideapad_platform_exit(priv);
platform_failed:
kfree(priv);
@@ -580,6 +759,7 @@
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
ideapad_unregister_rfkill(adevice, i);
ideapad_input_exit(priv);
+ ideapad_debugfs_exit(priv);
ideapad_platform_exit(priv);
dev_set_drvdata(&adevice->dev, NULL);
kfree(priv);
@@ -593,9 +773,9 @@
acpi_handle handle = adevice->handle;
unsigned long vpc1, vpc2, vpc_bit;
- if (read_ec_data(handle, 0x10, &vpc1))
+ if (read_ec_data(handle, VPCCMD_R_VPC1, &vpc1))
return;
- if (read_ec_data(handle, 0x1A, &vpc2))
+ if (read_ec_data(handle, VPCCMD_R_VPC2, &vpc2))
return;
vpc1 = (vpc2 << 8) | vpc1;
@@ -603,11 +783,14 @@
if (test_bit(vpc_bit, &vpc1)) {
switch (vpc_bit) {
case 9:
- ideapad_sync_rfk_state(adevice);
+ ideapad_sync_rfk_state(priv);
break;
case 4:
ideapad_backlight_notify_brightness(priv);
break;
+ case 3:
+ ideapad_input_novokey(priv);
+ break;
case 2:
ideapad_backlight_notify_power(priv);
break;
diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c
index b93a032..2d0f913 100644
--- a/drivers/platform/x86/intel_scu_ipcutil.c
+++ b/drivers/platform/x86/intel_scu_ipcutil.c
@@ -24,7 +24,7 @@
#include <linux/init.h>
#include <asm/intel_scu_ipc.h>
-static u32 major;
+static int major;
#define MAX_FW_SIZE 264192
@@ -117,7 +117,11 @@
static int __init ipc_module_init(void)
{
- return register_chrdev(0, "intel_mid_scu", &scu_ipc_fops);
+ major = register_chrdev(0, "intel_mid_scu", &scu_ipc_fops);
+ if (major < 0)
+ return major;
+
+ return 0;
}
static void __exit ipc_module_exit(void)
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index 3591630..09e26bf 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -226,6 +226,7 @@
static struct mutex sabi_mutex;
static struct platform_device *sdev;
static struct rfkill *rfk;
+static bool has_stepping_quirk;
static int force;
module_param(force, bool, 0);
@@ -370,15 +371,28 @@
&sretval);
if (!retval) {
user_brightness = sretval.retval[0];
- if (user_brightness != 0)
+ if (user_brightness > sabi_config->min_brightness)
user_brightness -= sabi_config->min_brightness;
+ else
+ user_brightness = 0;
}
return user_brightness;
}
static void set_brightness(u8 user_brightness)
{
- u8 user_level = user_brightness - sabi_config->min_brightness;
+ u8 user_level = user_brightness + sabi_config->min_brightness;
+
+ if (has_stepping_quirk && user_level != 0) {
+ /*
+ * short circuit if the specified level is what's already set
+ * to prevent the screen from flickering needlessly
+ */
+ if (user_brightness == read_brightness())
+ return;
+
+ sabi_set_command(sabi_config->commands.set_brightness, 0);
+ }
sabi_set_command(sabi_config->commands.set_brightness, user_level);
}
@@ -388,6 +402,40 @@
return (int)read_brightness();
}
+static void check_for_stepping_quirk(void)
+{
+ u8 initial_level;
+ u8 check_level;
+ u8 orig_level = read_brightness();
+
+ /*
+ * Some laptops exhibit the strange behaviour of stepping toward
+ * (rather than setting) the brightness except when changing to/from
+ * brightness level 0. This behaviour is checked for here and worked
+ * around in set_brightness.
+ */
+
+ if (orig_level == 0)
+ set_brightness(1);
+
+ initial_level = read_brightness();
+
+ if (initial_level <= 2)
+ check_level = initial_level + 2;
+ else
+ check_level = initial_level - 2;
+
+ has_stepping_quirk = false;
+ set_brightness(check_level);
+
+ if (read_brightness() != check_level) {
+ has_stepping_quirk = true;
+ pr_info("enabled workaround for brightness stepping quirk\n");
+ }
+
+ set_brightness(orig_level);
+}
+
static int update_status(struct backlight_device *bd)
{
set_brightness(bd->props.brightness);
@@ -621,6 +669,16 @@
.callback = dmi_check_cb,
},
{
+ .ident = "N220",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N220"),
+ DMI_MATCH(DMI_BOARD_NAME, "N220"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
.ident = "N150/N210/N220/N230",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR,
@@ -641,6 +699,15 @@
.callback = dmi_check_cb,
},
{
+ .ident = "R700",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SR700"),
+ DMI_MATCH(DMI_BOARD_NAME, "SR700"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
.ident = "R530/R730",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
@@ -686,6 +753,33 @@
},
.callback = dmi_check_cb,
},
+ {
+ .ident = "R528/R728",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R528/R728"),
+ DMI_MATCH(DMI_BOARD_NAME, "R528/R728"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "NC210/NC110",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
+ DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "X520",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X520"),
+ DMI_MATCH(DMI_BOARD_NAME, "X520"),
+ },
+ .callback = dmi_check_cb,
+ },
{ },
};
MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
@@ -770,7 +864,7 @@
sabi_iface = ioremap_nocache(ifaceP, 16);
if (!sabi_iface) {
pr_err("Can't remap %x\n", ifaceP);
- goto exit;
+ goto error_no_signature;
}
if (debug) {
printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
@@ -794,6 +888,9 @@
}
}
+ /* Check for stepping quirk */
+ check_for_stepping_quirk();
+
/* knock up a platform device to hang stuff off of */
sdev = platform_device_register_simple("samsung", -1, NULL, 0);
if (IS_ERR(sdev))
@@ -802,7 +899,8 @@
/* create a backlight device to talk to this one */
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_PLATFORM;
- props.max_brightness = sabi_config->max_brightness;
+ props.max_brightness = sabi_config->max_brightness -
+ sabi_config->min_brightness;
backlight_device = backlight_device_register("samsung", &sdev->dev,
NULL, &backlight_ops,
&props);
@@ -821,7 +919,6 @@
if (retval)
goto error_file_create;
-exit:
return 0;
error_file_create:
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index bbd182e..c006dee 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -3281,7 +3281,7 @@
/* request IRQ */
list_for_each_entry_reverse(irq, &spic_dev.interrupts, list) {
if (!request_irq(irq->irq.interrupts[0], sony_pic_irq,
- IRQF_DISABLED, "sony-laptop", &spic_dev)) {
+ 0, "sony-laptop", &spic_dev)) {
dprintk("IRQ: %d - triggering: %d - "
"polarity: %d - shr: %d\n",
irq->irq.interrupts[0],
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 4c20447..d528daa 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -41,6 +41,7 @@
{ KE_KEY, 0x8c, { KEY_MEDIA } },
/* Known non hotkey events don't handled or that we don't care yet */
+ { KE_IGNORE, 0x82, }, /* backlight event */
{ KE_IGNORE, 0x8e, },
{ KE_IGNORE, 0x8f, },
{ KE_IGNORE, 0x90, },
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index cb009b2..13ef8c3 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -47,7 +47,6 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/backlight.h>
-#include <linux/platform_device.h>
#include <linux/rfkill.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
@@ -63,11 +62,7 @@
MODULE_LICENSE("GPL");
/* Toshiba ACPI method paths */
-#define METHOD_LCD_BRIGHTNESS "\\_SB_.PCI0.VGA_.LCD_._BCM"
-#define TOSH_INTERFACE_1 "\\_SB_.VALD"
-#define TOSH_INTERFACE_2 "\\_SB_.VALZ"
#define METHOD_VIDEO_OUT "\\_SB_.VALX.DSSX"
-#define GHCI_METHOD ".GHCI"
/* Toshiba HCI interface definitions
*
@@ -111,6 +106,25 @@
#define HCI_WIRELESS_BT_ATTACH 0x40
#define HCI_WIRELESS_BT_POWER 0x80
+struct toshiba_acpi_dev {
+ struct acpi_device *acpi_dev;
+ const char *method_hci;
+ struct rfkill *bt_rfk;
+ struct input_dev *hotkey_dev;
+ struct backlight_device *backlight_dev;
+ struct led_classdev led_dev;
+
+ int force_fan;
+ int last_key_event;
+ int key_event_valid;
+
+ int illumination_supported:1;
+ int video_supported:1;
+ int fan_supported:1;
+
+ struct mutex mutex;
+};
+
static const struct acpi_device_id toshiba_device_ids[] = {
{"TOS6200", 0},
{"TOS6208", 0},
@@ -119,7 +133,7 @@
};
MODULE_DEVICE_TABLE(acpi, toshiba_device_ids);
-static const struct key_entry toshiba_acpi_keymap[] __initconst = {
+static const struct key_entry toshiba_acpi_keymap[] __devinitconst = {
{ KE_KEY, 0x101, { KEY_MUTE } },
{ KE_KEY, 0x102, { KEY_ZOOMOUT } },
{ KE_KEY, 0x103, { KEY_ZOOMIN } },
@@ -155,15 +169,6 @@
/* acpi interface wrappers
*/
-static int is_valid_acpi_path(const char *methodName)
-{
- acpi_handle handle;
- acpi_status status;
-
- status = acpi_get_handle(NULL, (char *)methodName, &handle);
- return !ACPI_FAILURE(status);
-}
-
static int write_acpi_int(const char *methodName, int val)
{
struct acpi_object_list params;
@@ -176,32 +181,14 @@
in_objs[0].integer.value = val;
status = acpi_evaluate_object(NULL, (char *)methodName, ¶ms, NULL);
- return (status == AE_OK);
+ return (status == AE_OK) ? 0 : -EIO;
}
-#if 0
-static int read_acpi_int(const char *methodName, int *pVal)
-{
- struct acpi_buffer results;
- union acpi_object out_objs[1];
- acpi_status status;
-
- results.length = sizeof(out_objs);
- results.pointer = out_objs;
-
- status = acpi_evaluate_object(0, (char *)methodName, 0, &results);
- *pVal = out_objs[0].integer.value;
-
- return (status == AE_OK) && (out_objs[0].type == ACPI_TYPE_INTEGER);
-}
-#endif
-
-static const char *method_hci /*= 0*/ ;
-
/* Perform a raw HCI call. Here we don't care about input or output buffer
* format.
*/
-static acpi_status hci_raw(const u32 in[HCI_WORDS], u32 out[HCI_WORDS])
+static acpi_status hci_raw(struct toshiba_acpi_dev *dev,
+ const u32 in[HCI_WORDS], u32 out[HCI_WORDS])
{
struct acpi_object_list params;
union acpi_object in_objs[HCI_WORDS];
@@ -220,7 +207,8 @@
results.length = sizeof(out_objs);
results.pointer = out_objs;
- status = acpi_evaluate_object(NULL, (char *)method_hci, ¶ms,
+ status = acpi_evaluate_object(dev->acpi_dev->handle,
+ (char *)dev->method_hci, ¶ms,
&results);
if ((status == AE_OK) && (out_objs->package.count <= HCI_WORDS)) {
for (i = 0; i < out_objs->package.count; ++i) {
@@ -237,85 +225,79 @@
* may be useful (such as "not supported").
*/
-static acpi_status hci_write1(u32 reg, u32 in1, u32 * result)
+static acpi_status hci_write1(struct toshiba_acpi_dev *dev, u32 reg,
+ u32 in1, u32 *result)
{
u32 in[HCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 };
u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
+ acpi_status status = hci_raw(dev, in, out);
*result = (status == AE_OK) ? out[0] : HCI_FAILURE;
return status;
}
-static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result)
+static acpi_status hci_read1(struct toshiba_acpi_dev *dev, u32 reg,
+ u32 *out1, u32 *result)
{
u32 in[HCI_WORDS] = { HCI_GET, reg, 0, 0, 0, 0 };
u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
+ acpi_status status = hci_raw(dev, in, out);
*out1 = out[2];
*result = (status == AE_OK) ? out[0] : HCI_FAILURE;
return status;
}
-static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32 *result)
+static acpi_status hci_write2(struct toshiba_acpi_dev *dev, u32 reg,
+ u32 in1, u32 in2, u32 *result)
{
u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
+ acpi_status status = hci_raw(dev, in, out);
*result = (status == AE_OK) ? out[0] : HCI_FAILURE;
return status;
}
-static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result)
+static acpi_status hci_read2(struct toshiba_acpi_dev *dev, u32 reg,
+ u32 *out1, u32 *out2, u32 *result)
{
u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
+ acpi_status status = hci_raw(dev, in, out);
*out1 = out[2];
*out2 = out[3];
*result = (status == AE_OK) ? out[0] : HCI_FAILURE;
return status;
}
-struct toshiba_acpi_dev {
- struct platform_device *p_dev;
- struct rfkill *bt_rfk;
- struct input_dev *hotkey_dev;
- int illumination_installed;
- acpi_handle handle;
-
- const char *bt_name;
-
- struct mutex mutex;
-};
-
/* Illumination support */
-static int toshiba_illumination_available(void)
+static int toshiba_illumination_available(struct toshiba_acpi_dev *dev)
{
u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status;
in[0] = 0xf100;
- status = hci_raw(in, out);
+ status = hci_raw(dev, in, out);
if (ACPI_FAILURE(status)) {
pr_info("Illumination device not available\n");
return 0;
}
in[0] = 0xf400;
- status = hci_raw(in, out);
+ status = hci_raw(dev, in, out);
return 1;
}
static void toshiba_illumination_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
+ struct toshiba_acpi_dev *dev = container_of(cdev,
+ struct toshiba_acpi_dev, led_dev);
u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status;
/* First request : initialize communication. */
in[0] = 0xf100;
- status = hci_raw(in, out);
+ status = hci_raw(dev, in, out);
if (ACPI_FAILURE(status)) {
pr_info("Illumination device not available\n");
return;
@@ -326,7 +308,7 @@
in[0] = 0xf400;
in[1] = 0x14e;
in[2] = 1;
- status = hci_raw(in, out);
+ status = hci_raw(dev, in, out);
if (ACPI_FAILURE(status)) {
pr_info("ACPI call for illumination failed\n");
return;
@@ -336,7 +318,7 @@
in[0] = 0xf400;
in[1] = 0x14e;
in[2] = 0;
- status = hci_raw(in, out);
+ status = hci_raw(dev, in, out);
if (ACPI_FAILURE(status)) {
pr_info("ACPI call for illumination failed.\n");
return;
@@ -347,11 +329,13 @@
in[0] = 0xf200;
in[1] = 0;
in[2] = 0;
- hci_raw(in, out);
+ hci_raw(dev, in, out);
}
static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
{
+ struct toshiba_acpi_dev *dev = container_of(cdev,
+ struct toshiba_acpi_dev, led_dev);
u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status;
@@ -359,7 +343,7 @@
/* First request : initialize communication. */
in[0] = 0xf100;
- status = hci_raw(in, out);
+ status = hci_raw(dev, in, out);
if (ACPI_FAILURE(status)) {
pr_info("Illumination device not available\n");
return LED_OFF;
@@ -368,7 +352,7 @@
/* Check the illumination */
in[0] = 0xf300;
in[1] = 0x14e;
- status = hci_raw(in, out);
+ status = hci_raw(dev, in, out);
if (ACPI_FAILURE(status)) {
pr_info("ACPI call for illumination failed.\n");
return LED_OFF;
@@ -380,46 +364,35 @@
in[0] = 0xf200;
in[1] = 0;
in[2] = 0;
- hci_raw(in, out);
+ hci_raw(dev, in, out);
return result;
}
-static struct led_classdev toshiba_led = {
- .name = "toshiba::illumination",
- .max_brightness = 1,
- .brightness_set = toshiba_illumination_set,
- .brightness_get = toshiba_illumination_get,
-};
-
-static struct toshiba_acpi_dev toshiba_acpi = {
- .bt_name = "Toshiba Bluetooth",
-};
-
/* Bluetooth rfkill handlers */
-static u32 hci_get_bt_present(bool *present)
+static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
{
u32 hci_result;
u32 value, value2;
value = 0;
value2 = 0;
- hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+ hci_read2(dev, HCI_WIRELESS, &value, &value2, &hci_result);
if (hci_result == HCI_SUCCESS)
*present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false;
return hci_result;
}
-static u32 hci_get_radio_state(bool *radio_state)
+static u32 hci_get_radio_state(struct toshiba_acpi_dev *dev, bool *radio_state)
{
u32 hci_result;
u32 value, value2;
value = 0;
value2 = 0x0001;
- hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+ hci_read2(dev, HCI_WIRELESS, &value, &value2, &hci_result);
*radio_state = value & HCI_WIRELESS_KILL_SWITCH;
return hci_result;
@@ -436,8 +409,8 @@
value = (blocked == false);
mutex_lock(&dev->mutex);
- if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) {
- err = -EBUSY;
+ if (hci_get_radio_state(dev, &radio_state) != HCI_SUCCESS) {
+ err = -EIO;
goto out;
}
@@ -446,11 +419,11 @@
goto out;
}
- hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
- hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
+ hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
+ hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS)
- err = -EBUSY;
+ err = -EIO;
else
err = 0;
out:
@@ -467,7 +440,7 @@
mutex_lock(&dev->mutex);
- hci_result = hci_get_radio_state(&value);
+ hci_result = hci_get_radio_state(dev, &value);
if (hci_result != HCI_SUCCESS) {
/* Can't do anything useful */
mutex_unlock(&dev->mutex);
@@ -488,63 +461,64 @@
};
static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
-static struct backlight_device *toshiba_backlight_device;
-static int force_fan;
-static int last_key_event;
-static int key_event_valid;
static int get_lcd(struct backlight_device *bd)
{
+ struct toshiba_acpi_dev *dev = bl_get_data(bd);
u32 hci_result;
u32 value;
- hci_read1(HCI_LCD_BRIGHTNESS, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
+ hci_read1(dev, HCI_LCD_BRIGHTNESS, &value, &hci_result);
+ if (hci_result == HCI_SUCCESS)
return (value >> HCI_LCD_BRIGHTNESS_SHIFT);
- } else
- return -EFAULT;
+
+ return -EIO;
}
static int lcd_proc_show(struct seq_file *m, void *v)
{
- int value = get_lcd(NULL);
+ struct toshiba_acpi_dev *dev = m->private;
+ int value;
+ if (!dev->backlight_dev)
+ return -ENODEV;
+
+ value = get_lcd(dev->backlight_dev);
if (value >= 0) {
seq_printf(m, "brightness: %d\n", value);
seq_printf(m, "brightness_levels: %d\n",
HCI_LCD_BRIGHTNESS_LEVELS);
- } else {
- pr_err("Error reading LCD brightness\n");
+ return 0;
}
- return 0;
+ pr_err("Error reading LCD brightness\n");
+ return -EIO;
}
static int lcd_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, lcd_proc_show, NULL);
+ return single_open(file, lcd_proc_show, PDE(inode)->data);
}
-static int set_lcd(int value)
+static int set_lcd(struct toshiba_acpi_dev *dev, int value)
{
u32 hci_result;
value = value << HCI_LCD_BRIGHTNESS_SHIFT;
- hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result);
- if (hci_result != HCI_SUCCESS)
- return -EFAULT;
-
- return 0;
+ hci_write1(dev, HCI_LCD_BRIGHTNESS, value, &hci_result);
+ return hci_result == HCI_SUCCESS ? 0 : -EIO;
}
static int set_lcd_status(struct backlight_device *bd)
{
- return set_lcd(bd->props.brightness);
+ struct toshiba_acpi_dev *dev = bl_get_data(bd);
+ return set_lcd(dev, bd->props.brightness);
}
static ssize_t lcd_proc_write(struct file *file, const char __user *buf,
size_t count, loff_t *pos)
{
+ struct toshiba_acpi_dev *dev = PDE(file->f_path.dentry->d_inode)->data;
char cmd[42];
size_t len;
int value;
@@ -557,7 +531,7 @@
if (sscanf(cmd, " brightness : %i", &value) == 1 &&
value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) {
- ret = set_lcd(value);
+ ret = set_lcd(dev, value);
if (ret == 0)
ret = count;
} else {
@@ -575,41 +549,49 @@
.write = lcd_proc_write,
};
-static int video_proc_show(struct seq_file *m, void *v)
+static int get_video_status(struct toshiba_acpi_dev *dev, u32 *status)
{
u32 hci_result;
- u32 value;
- hci_read1(HCI_VIDEO_OUT, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
+ hci_read1(dev, HCI_VIDEO_OUT, status, &hci_result);
+ return hci_result == HCI_SUCCESS ? 0 : -EIO;
+}
+
+static int video_proc_show(struct seq_file *m, void *v)
+{
+ struct toshiba_acpi_dev *dev = m->private;
+ u32 value;
+ int ret;
+
+ ret = get_video_status(dev, &value);
+ if (!ret) {
int is_lcd = (value & HCI_VIDEO_OUT_LCD) ? 1 : 0;
int is_crt = (value & HCI_VIDEO_OUT_CRT) ? 1 : 0;
int is_tv = (value & HCI_VIDEO_OUT_TV) ? 1 : 0;
seq_printf(m, "lcd_out: %d\n", is_lcd);
seq_printf(m, "crt_out: %d\n", is_crt);
seq_printf(m, "tv_out: %d\n", is_tv);
- } else {
- pr_err("Error reading video out status\n");
}
- return 0;
+ return ret;
}
static int video_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, video_proc_show, NULL);
+ return single_open(file, video_proc_show, PDE(inode)->data);
}
static ssize_t video_proc_write(struct file *file, const char __user *buf,
size_t count, loff_t *pos)
{
+ struct toshiba_acpi_dev *dev = PDE(file->f_path.dentry->d_inode)->data;
char *cmd, *buffer;
+ int ret;
int value;
int remain = count;
int lcd_out = -1;
int crt_out = -1;
int tv_out = -1;
- u32 hci_result;
u32 video_out;
cmd = kmalloc(count + 1, GFP_KERNEL);
@@ -644,8 +626,8 @@
kfree(cmd);
- hci_read1(HCI_VIDEO_OUT, &video_out, &hci_result);
- if (hci_result == HCI_SUCCESS) {
+ ret = get_video_status(dev, &video_out);
+ if (!ret) {
unsigned int new_video_out = video_out;
if (lcd_out != -1)
_set_bit(&new_video_out, HCI_VIDEO_OUT_LCD, lcd_out);
@@ -656,12 +638,10 @@
/* To avoid unnecessary video disruption, only write the new
* video setting if something changed. */
if (new_video_out != video_out)
- write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
- } else {
- return -EFAULT;
+ ret = write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
}
- return count;
+ return ret ? ret : count;
}
static const struct file_operations video_proc_fops = {
@@ -673,30 +653,38 @@
.write = video_proc_write,
};
-static int fan_proc_show(struct seq_file *m, void *v)
+static int get_fan_status(struct toshiba_acpi_dev *dev, u32 *status)
{
u32 hci_result;
+
+ hci_read1(dev, HCI_FAN, status, &hci_result);
+ return hci_result == HCI_SUCCESS ? 0 : -EIO;
+}
+
+static int fan_proc_show(struct seq_file *m, void *v)
+{
+ struct toshiba_acpi_dev *dev = m->private;
+ int ret;
u32 value;
- hci_read1(HCI_FAN, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
+ ret = get_fan_status(dev, &value);
+ if (!ret) {
seq_printf(m, "running: %d\n", (value > 0));
- seq_printf(m, "force_on: %d\n", force_fan);
- } else {
- pr_err("Error reading fan status\n");
+ seq_printf(m, "force_on: %d\n", dev->force_fan);
}
- return 0;
+ return ret;
}
static int fan_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, fan_proc_show, NULL);
+ return single_open(file, fan_proc_show, PDE(inode)->data);
}
static ssize_t fan_proc_write(struct file *file, const char __user *buf,
size_t count, loff_t *pos)
{
+ struct toshiba_acpi_dev *dev = PDE(file->f_path.dentry->d_inode)->data;
char cmd[42];
size_t len;
int value;
@@ -709,11 +697,11 @@
if (sscanf(cmd, " force_on : %i", &value) == 1 &&
value >= 0 && value <= 1) {
- hci_write1(HCI_FAN, value, &hci_result);
+ hci_write1(dev, HCI_FAN, value, &hci_result);
if (hci_result != HCI_SUCCESS)
- return -EFAULT;
+ return -EIO;
else
- force_fan = value;
+ dev->force_fan = value;
} else {
return -EINVAL;
}
@@ -732,42 +720,43 @@
static int keys_proc_show(struct seq_file *m, void *v)
{
+ struct toshiba_acpi_dev *dev = m->private;
u32 hci_result;
u32 value;
- if (!key_event_valid) {
- hci_read1(HCI_SYSTEM_EVENT, &value, &hci_result);
+ if (!dev->key_event_valid) {
+ hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result);
if (hci_result == HCI_SUCCESS) {
- key_event_valid = 1;
- last_key_event = value;
+ dev->key_event_valid = 1;
+ dev->last_key_event = value;
} else if (hci_result == HCI_EMPTY) {
/* better luck next time */
} else if (hci_result == HCI_NOT_SUPPORTED) {
/* This is a workaround for an unresolved issue on
* some machines where system events sporadically
* become disabled. */
- hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
+ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result);
pr_notice("Re-enabled hotkeys\n");
} else {
pr_err("Error reading hotkey status\n");
- goto end;
+ return -EIO;
}
}
- seq_printf(m, "hotkey_ready: %d\n", key_event_valid);
- seq_printf(m, "hotkey: 0x%04x\n", last_key_event);
-end:
+ seq_printf(m, "hotkey_ready: %d\n", dev->key_event_valid);
+ seq_printf(m, "hotkey: 0x%04x\n", dev->last_key_event);
return 0;
}
static int keys_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, keys_proc_show, NULL);
+ return single_open(file, keys_proc_show, PDE(inode)->data);
}
static ssize_t keys_proc_write(struct file *file, const char __user *buf,
size_t count, loff_t *pos)
{
+ struct toshiba_acpi_dev *dev = PDE(file->f_path.dentry->d_inode)->data;
char cmd[42];
size_t len;
int value;
@@ -778,7 +767,7 @@
cmd[len] = '\0';
if (sscanf(cmd, " hotkey_ready : %i", &value) == 1 && value == 0) {
- key_event_valid = 0;
+ dev->key_event_valid = 0;
} else {
return -EINVAL;
}
@@ -820,21 +809,35 @@
#define PROC_TOSHIBA "toshiba"
-static void __init create_toshiba_proc_entries(void)
+static void __devinit
+create_toshiba_proc_entries(struct toshiba_acpi_dev *dev)
{
- proc_create("lcd", S_IRUGO | S_IWUSR, toshiba_proc_dir, &lcd_proc_fops);
- proc_create("video", S_IRUGO | S_IWUSR, toshiba_proc_dir, &video_proc_fops);
- proc_create("fan", S_IRUGO | S_IWUSR, toshiba_proc_dir, &fan_proc_fops);
- proc_create("keys", S_IRUGO | S_IWUSR, toshiba_proc_dir, &keys_proc_fops);
- proc_create("version", S_IRUGO, toshiba_proc_dir, &version_proc_fops);
+ if (dev->backlight_dev)
+ proc_create_data("lcd", S_IRUGO | S_IWUSR, toshiba_proc_dir,
+ &lcd_proc_fops, dev);
+ if (dev->video_supported)
+ proc_create_data("video", S_IRUGO | S_IWUSR, toshiba_proc_dir,
+ &video_proc_fops, dev);
+ if (dev->fan_supported)
+ proc_create_data("fan", S_IRUGO | S_IWUSR, toshiba_proc_dir,
+ &fan_proc_fops, dev);
+ if (dev->hotkey_dev)
+ proc_create_data("keys", S_IRUGO | S_IWUSR, toshiba_proc_dir,
+ &keys_proc_fops, dev);
+ proc_create_data("version", S_IRUGO, toshiba_proc_dir,
+ &version_proc_fops, dev);
}
-static void remove_toshiba_proc_entries(void)
+static void remove_toshiba_proc_entries(struct toshiba_acpi_dev *dev)
{
- remove_proc_entry("lcd", toshiba_proc_dir);
- remove_proc_entry("video", toshiba_proc_dir);
- remove_proc_entry("fan", toshiba_proc_dir);
- remove_proc_entry("keys", toshiba_proc_dir);
+ if (dev->backlight_dev)
+ remove_proc_entry("lcd", toshiba_proc_dir);
+ if (dev->video_supported)
+ remove_proc_entry("video", toshiba_proc_dir);
+ if (dev->fan_supported)
+ remove_proc_entry("fan", toshiba_proc_dir);
+ if (dev->hotkey_dev)
+ remove_proc_entry("keys", toshiba_proc_dir);
remove_proc_entry("version", toshiba_proc_dir);
}
@@ -843,14 +846,197 @@
.update_status = set_lcd_status,
};
-static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context)
+static int __devinit toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
{
+ acpi_status status;
+ int error;
+
+ dev->hotkey_dev = input_allocate_device();
+ if (!dev->hotkey_dev) {
+ pr_info("Unable to register input device\n");
+ return -ENOMEM;
+ }
+
+ dev->hotkey_dev->name = "Toshiba input device";
+ dev->hotkey_dev->phys = "toshiba_acpi/input0";
+ dev->hotkey_dev->id.bustype = BUS_HOST;
+
+ error = sparse_keymap_setup(dev->hotkey_dev, toshiba_acpi_keymap, NULL);
+ if (error)
+ goto err_free_dev;
+
+ status = acpi_evaluate_object(dev->acpi_dev->handle, "ENAB", NULL, NULL);
+ if (ACPI_FAILURE(status)) {
+ pr_info("Unable to enable hotkeys\n");
+ error = -ENODEV;
+ goto err_free_keymap;
+ }
+
+ error = input_register_device(dev->hotkey_dev);
+ if (error) {
+ pr_info("Unable to register input device\n");
+ goto err_free_keymap;
+ }
+
+ return 0;
+
+ err_free_keymap:
+ sparse_keymap_free(dev->hotkey_dev);
+ err_free_dev:
+ input_free_device(dev->hotkey_dev);
+ dev->hotkey_dev = NULL;
+ return error;
+}
+
+static int toshiba_acpi_remove(struct acpi_device *acpi_dev, int type)
+{
+ struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev);
+
+ remove_toshiba_proc_entries(dev);
+
+ if (dev->hotkey_dev) {
+ input_unregister_device(dev->hotkey_dev);
+ sparse_keymap_free(dev->hotkey_dev);
+ }
+
+ if (dev->bt_rfk) {
+ rfkill_unregister(dev->bt_rfk);
+ rfkill_destroy(dev->bt_rfk);
+ }
+
+ if (dev->backlight_dev)
+ backlight_device_unregister(dev->backlight_dev);
+
+ if (dev->illumination_supported)
+ led_classdev_unregister(&dev->led_dev);
+
+ kfree(dev);
+
+ return 0;
+}
+
+static const char * __devinit find_hci_method(acpi_handle handle)
+{
+ acpi_status status;
+ acpi_handle hci_handle;
+
+ status = acpi_get_handle(handle, "GHCI", &hci_handle);
+ if (ACPI_SUCCESS(status))
+ return "GHCI";
+
+ status = acpi_get_handle(handle, "SPFC", &hci_handle);
+ if (ACPI_SUCCESS(status))
+ return "SPFC";
+
+ return NULL;
+}
+
+static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev)
+{
+ struct toshiba_acpi_dev *dev;
+ const char *hci_method;
+ u32 hci_result;
+ u32 dummy;
+ bool bt_present;
+ int ret = 0;
+ struct backlight_properties props;
+
+ pr_info("Toshiba Laptop ACPI Extras version %s\n",
+ TOSHIBA_ACPI_VERSION);
+
+ hci_method = find_hci_method(acpi_dev->handle);
+ if (!hci_method) {
+ pr_err("HCI interface not found\n");
+ return -ENODEV;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ dev->acpi_dev = acpi_dev;
+ dev->method_hci = hci_method;
+ acpi_dev->driver_data = dev;
+
+ if (toshiba_acpi_setup_keyboard(dev))
+ pr_info("Unable to activate hotkeys\n");
+
+ mutex_init(&dev->mutex);
+
+ /* enable event fifo */
+ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result);
+
+ props.type = BACKLIGHT_PLATFORM;
+ props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
+ dev->backlight_dev = backlight_device_register("toshiba",
+ &acpi_dev->dev,
+ dev,
+ &toshiba_backlight_data,
+ &props);
+ if (IS_ERR(dev->backlight_dev)) {
+ ret = PTR_ERR(dev->backlight_dev);
+
+ pr_err("Could not register toshiba backlight device\n");
+ dev->backlight_dev = NULL;
+ goto error;
+ }
+ dev->backlight_dev->props.brightness = get_lcd(dev->backlight_dev);
+
+ /* Register rfkill switch for Bluetooth */
+ if (hci_get_bt_present(dev, &bt_present) == HCI_SUCCESS && bt_present) {
+ dev->bt_rfk = rfkill_alloc("Toshiba Bluetooth",
+ &acpi_dev->dev,
+ RFKILL_TYPE_BLUETOOTH,
+ &toshiba_rfk_ops,
+ dev);
+ if (!dev->bt_rfk) {
+ pr_err("unable to allocate rfkill device\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ ret = rfkill_register(dev->bt_rfk);
+ if (ret) {
+ pr_err("unable to register rfkill device\n");
+ rfkill_destroy(dev->bt_rfk);
+ goto error;
+ }
+ }
+
+ if (toshiba_illumination_available(dev)) {
+ dev->led_dev.name = "toshiba::illumination";
+ dev->led_dev.max_brightness = 1;
+ dev->led_dev.brightness_set = toshiba_illumination_set;
+ dev->led_dev.brightness_get = toshiba_illumination_get;
+ if (!led_classdev_register(&acpi_dev->dev, &dev->led_dev))
+ dev->illumination_supported = 1;
+ }
+
+ /* Determine whether or not BIOS supports fan and video interfaces */
+
+ ret = get_video_status(dev, &dummy);
+ dev->video_supported = !ret;
+
+ ret = get_fan_status(dev, &dummy);
+ dev->fan_supported = !ret;
+
+ create_toshiba_proc_entries(dev);
+
+ return 0;
+
+error:
+ toshiba_acpi_remove(acpi_dev, 0);
+ return ret;
+}
+
+static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
+{
+ struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev);
u32 hci_result, value;
if (event != 0x80)
return;
do {
- hci_read1(HCI_SYSTEM_EVENT, &value, &hci_result);
+ hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result);
if (hci_result == HCI_SUCCESS) {
if (value == 0x100)
continue;
@@ -858,7 +1044,7 @@
if (value & 0x80)
continue;
- if (!sparse_keymap_report_event(toshiba_acpi.hotkey_dev,
+ if (!sparse_keymap_report_event(dev->hotkey_dev,
value, 1, true)) {
pr_info("Unknown key %x\n",
value);
@@ -867,200 +1053,49 @@
/* This is a workaround for an unresolved issue on
* some machines where system events sporadically
* become disabled. */
- hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
+ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result);
pr_notice("Re-enabled hotkeys\n");
}
} while (hci_result != HCI_EMPTY);
}
-static int __init toshiba_acpi_setup_keyboard(char *device)
-{
- acpi_status status;
- int error;
- status = acpi_get_handle(NULL, device, &toshiba_acpi.handle);
- if (ACPI_FAILURE(status)) {
- pr_info("Unable to get notification device\n");
- return -ENODEV;
- }
-
- toshiba_acpi.hotkey_dev = input_allocate_device();
- if (!toshiba_acpi.hotkey_dev) {
- pr_info("Unable to register input device\n");
- return -ENOMEM;
- }
-
- toshiba_acpi.hotkey_dev->name = "Toshiba input device";
- toshiba_acpi.hotkey_dev->phys = device;
- toshiba_acpi.hotkey_dev->id.bustype = BUS_HOST;
-
- error = sparse_keymap_setup(toshiba_acpi.hotkey_dev,
- toshiba_acpi_keymap, NULL);
- if (error)
- goto err_free_dev;
-
- status = acpi_install_notify_handler(toshiba_acpi.handle,
- ACPI_DEVICE_NOTIFY, toshiba_acpi_notify, NULL);
- if (ACPI_FAILURE(status)) {
- pr_info("Unable to install hotkey notification\n");
- error = -ENODEV;
- goto err_free_keymap;
- }
-
- status = acpi_evaluate_object(toshiba_acpi.handle, "ENAB", NULL, NULL);
- if (ACPI_FAILURE(status)) {
- pr_info("Unable to enable hotkeys\n");
- error = -ENODEV;
- goto err_remove_notify;
- }
-
- error = input_register_device(toshiba_acpi.hotkey_dev);
- if (error) {
- pr_info("Unable to register input device\n");
- goto err_remove_notify;
- }
-
- return 0;
-
- err_remove_notify:
- acpi_remove_notify_handler(toshiba_acpi.handle,
- ACPI_DEVICE_NOTIFY, toshiba_acpi_notify);
- err_free_keymap:
- sparse_keymap_free(toshiba_acpi.hotkey_dev);
- err_free_dev:
- input_free_device(toshiba_acpi.hotkey_dev);
- toshiba_acpi.hotkey_dev = NULL;
- return error;
-}
-
-static void toshiba_acpi_exit(void)
-{
- if (toshiba_acpi.hotkey_dev) {
- acpi_remove_notify_handler(toshiba_acpi.handle,
- ACPI_DEVICE_NOTIFY, toshiba_acpi_notify);
- sparse_keymap_free(toshiba_acpi.hotkey_dev);
- input_unregister_device(toshiba_acpi.hotkey_dev);
- }
-
- if (toshiba_acpi.bt_rfk) {
- rfkill_unregister(toshiba_acpi.bt_rfk);
- rfkill_destroy(toshiba_acpi.bt_rfk);
- }
-
- if (toshiba_backlight_device)
- backlight_device_unregister(toshiba_backlight_device);
-
- remove_toshiba_proc_entries();
-
- if (toshiba_proc_dir)
- remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
-
- if (toshiba_acpi.illumination_installed)
- led_classdev_unregister(&toshiba_led);
-
- platform_device_unregister(toshiba_acpi.p_dev);
-
- return;
-}
+static struct acpi_driver toshiba_acpi_driver = {
+ .name = "Toshiba ACPI driver",
+ .owner = THIS_MODULE,
+ .ids = toshiba_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
+ .ops = {
+ .add = toshiba_acpi_add,
+ .remove = toshiba_acpi_remove,
+ .notify = toshiba_acpi_notify,
+ },
+};
static int __init toshiba_acpi_init(void)
{
- u32 hci_result;
- bool bt_present;
- int ret = 0;
- struct backlight_properties props;
-
- if (acpi_disabled)
- return -ENODEV;
-
- /* simple device detection: look for HCI method */
- if (is_valid_acpi_path(TOSH_INTERFACE_1 GHCI_METHOD)) {
- method_hci = TOSH_INTERFACE_1 GHCI_METHOD;
- if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_1))
- pr_info("Unable to activate hotkeys\n");
- } else if (is_valid_acpi_path(TOSH_INTERFACE_2 GHCI_METHOD)) {
- method_hci = TOSH_INTERFACE_2 GHCI_METHOD;
- if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_2))
- pr_info("Unable to activate hotkeys\n");
- } else
- return -ENODEV;
-
- pr_info("Toshiba Laptop ACPI Extras version %s\n",
- TOSHIBA_ACPI_VERSION);
- pr_info(" HCI method: %s\n", method_hci);
-
- mutex_init(&toshiba_acpi.mutex);
-
- toshiba_acpi.p_dev = platform_device_register_simple("toshiba_acpi",
- -1, NULL, 0);
- if (IS_ERR(toshiba_acpi.p_dev)) {
- ret = PTR_ERR(toshiba_acpi.p_dev);
- pr_err("unable to register platform device\n");
- toshiba_acpi.p_dev = NULL;
- toshiba_acpi_exit();
- return ret;
- }
-
- force_fan = 0;
- key_event_valid = 0;
-
- /* enable event fifo */
- hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
+ int ret;
toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir);
if (!toshiba_proc_dir) {
- toshiba_acpi_exit();
+ pr_err("Unable to create proc dir " PROC_TOSHIBA "\n");
return -ENODEV;
- } else {
- create_toshiba_proc_entries();
}
- props.type = BACKLIGHT_PLATFORM;
- props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
- toshiba_backlight_device = backlight_device_register("toshiba",
- &toshiba_acpi.p_dev->dev,
- NULL,
- &toshiba_backlight_data,
- &props);
- if (IS_ERR(toshiba_backlight_device)) {
- ret = PTR_ERR(toshiba_backlight_device);
-
- pr_err("Could not register toshiba backlight device\n");
- toshiba_backlight_device = NULL;
- toshiba_acpi_exit();
- return ret;
+ ret = acpi_bus_register_driver(&toshiba_acpi_driver);
+ if (ret) {
+ pr_err("Failed to register ACPI driver: %d\n", ret);
+ remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
}
- /* Register rfkill switch for Bluetooth */
- if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) {
- toshiba_acpi.bt_rfk = rfkill_alloc(toshiba_acpi.bt_name,
- &toshiba_acpi.p_dev->dev,
- RFKILL_TYPE_BLUETOOTH,
- &toshiba_rfk_ops,
- &toshiba_acpi);
- if (!toshiba_acpi.bt_rfk) {
- pr_err("unable to allocate rfkill device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
+ return ret;
+}
- ret = rfkill_register(toshiba_acpi.bt_rfk);
- if (ret) {
- pr_err("unable to register rfkill device\n");
- rfkill_destroy(toshiba_acpi.bt_rfk);
- toshiba_acpi_exit();
- return ret;
- }
- }
-
- toshiba_acpi.illumination_installed = 0;
- if (toshiba_illumination_available()) {
- if (!led_classdev_register(&(toshiba_acpi.p_dev->dev),
- &toshiba_led))
- toshiba_acpi.illumination_installed = 1;
- }
-
- return 0;
+static void __exit toshiba_acpi_exit(void)
+{
+ acpi_bus_unregister_driver(&toshiba_acpi_driver);
+ if (toshiba_proc_dir)
+ remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
}
module_init(toshiba_acpi_init);
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index f23d5a8..9b88be4 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -754,9 +754,13 @@
struct wmi_block *wblock, *next;
/* Delete devices for all the GUIDs */
- list_for_each_entry_safe(wblock, next, &wmi_block_list, list)
+ list_for_each_entry_safe(wblock, next, &wmi_block_list, list) {
+ list_del(&wblock->list);
if (wblock->dev.class)
device_unregister(&wblock->dev);
+ else
+ kfree(wblock);
+ }
}
static bool guid_already_parsed(const char *guid_string)
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 57de051..9f88641 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -70,6 +70,7 @@
config BATTERY_DS2780
tristate "DS2780 battery driver"
+ depends on HAS_IOMEM
select W1
select W1_SLAVE_DS2780
help
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c
index 1fefe82..91a783d 100644
--- a/drivers/power/ds2780_battery.c
+++ b/drivers/power/ds2780_battery.c
@@ -39,6 +39,7 @@
struct device *dev;
struct power_supply bat;
struct device *w1_dev;
+ struct task_struct *mutex_holder;
};
enum current_types {
@@ -49,8 +50,8 @@
static const char model[] = "DS2780";
static const char manufacturer[] = "Maxim/Dallas";
-static inline struct ds2780_device_info *to_ds2780_device_info(
- struct power_supply *psy)
+static inline struct ds2780_device_info *
+to_ds2780_device_info(struct power_supply *psy)
{
return container_of(psy, struct ds2780_device_info, bat);
}
@@ -60,17 +61,28 @@
return dev_get_drvdata(dev);
}
-static inline int ds2780_read8(struct device *dev, u8 *val, int addr)
+static inline int ds2780_battery_io(struct ds2780_device_info *dev_info,
+ char *buf, int addr, size_t count, int io)
{
- return w1_ds2780_io(dev, val, addr, sizeof(u8), 0);
+ if (dev_info->mutex_holder == current)
+ return w1_ds2780_io_nolock(dev_info->w1_dev, buf, addr, count, io);
+ else
+ return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io);
}
-static int ds2780_read16(struct device *dev, s16 *val, int addr)
+static inline int ds2780_read8(struct ds2780_device_info *dev_info, u8 *val,
+ int addr)
+{
+ return ds2780_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2780_read16(struct ds2780_device_info *dev_info, s16 *val,
+ int addr)
{
int ret;
u8 raw[2];
- ret = w1_ds2780_io(dev, raw, addr, sizeof(u8) * 2, 0);
+ ret = ds2780_battery_io(dev_info, raw, addr, sizeof(raw), 0);
if (ret < 0)
return ret;
@@ -79,16 +91,16 @@
return 0;
}
-static inline int ds2780_read_block(struct device *dev, u8 *val, int addr,
- size_t count)
+static inline int ds2780_read_block(struct ds2780_device_info *dev_info,
+ u8 *val, int addr, size_t count)
{
- return w1_ds2780_io(dev, val, addr, count, 0);
+ return ds2780_battery_io(dev_info, val, addr, count, 0);
}
-static inline int ds2780_write(struct device *dev, u8 *val, int addr,
- size_t count)
+static inline int ds2780_write(struct ds2780_device_info *dev_info, u8 *val,
+ int addr, size_t count)
{
- return w1_ds2780_io(dev, val, addr, count, 1);
+ return ds2780_battery_io(dev_info, val, addr, count, 1);
}
static inline int ds2780_store_eeprom(struct device *dev, int addr)
@@ -122,7 +134,7 @@
{
int ret;
- ret = ds2780_write(dev_info->w1_dev, &conductance,
+ ret = ds2780_write(dev_info, &conductance,
DS2780_RSNSP_REG, sizeof(u8));
if (ret < 0)
return ret;
@@ -134,7 +146,7 @@
static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info,
u16 *rsgain)
{
- return ds2780_read16(dev_info->w1_dev, rsgain, DS2780_RSGAIN_MSB_REG);
+ return ds2780_read16(dev_info, rsgain, DS2780_RSGAIN_MSB_REG);
}
/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
@@ -144,8 +156,8 @@
int ret;
u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
- ret = ds2780_write(dev_info->w1_dev, raw,
- DS2780_RSGAIN_MSB_REG, sizeof(u8) * 2);
+ ret = ds2780_write(dev_info, raw,
+ DS2780_RSGAIN_MSB_REG, sizeof(raw));
if (ret < 0)
return ret;
@@ -167,7 +179,7 @@
* Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
* voltage LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, &voltage_raw,
+ ret = ds2780_read16(dev_info, &voltage_raw,
DS2780_VOLT_MSB_REG);
if (ret < 0)
return ret;
@@ -196,7 +208,7 @@
* Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
* temperature LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, &temperature_raw,
+ ret = ds2780_read16(dev_info, &temperature_raw,
DS2780_TEMP_MSB_REG);
if (ret < 0)
return ret;
@@ -222,13 +234,13 @@
* The units of measurement for current are dependent on the value of
* the sense resistor.
*/
- ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG);
+ ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
if (ret < 0)
return ret;
if (sense_res_raw == 0) {
dev_err(dev_info->dev, "sense resistor value is 0\n");
- return -ENXIO;
+ return -EINVAL;
}
sense_res = 1000 / sense_res_raw;
@@ -248,7 +260,7 @@
* Bits 7 - 0 of the current value are in bits 7 - 0 of the current
* LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, reg_msb);
+ ret = ds2780_read16(dev_info, ¤t_raw, reg_msb);
if (ret < 0)
return ret;
@@ -267,7 +279,7 @@
* The units of measurement for accumulated current are dependent on
* the value of the sense resistor.
*/
- ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG);
+ ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
if (ret < 0)
return ret;
@@ -285,7 +297,7 @@
* Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
* LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, DS2780_ACR_MSB_REG);
+ ret = ds2780_read16(dev_info, ¤t_raw, DS2780_ACR_MSB_REG);
if (ret < 0)
return ret;
@@ -299,7 +311,7 @@
int ret;
u8 raw;
- ret = ds2780_read8(dev_info->w1_dev, &raw, DS2780_RARC_REG);
+ ret = ds2780_read8(dev_info, &raw, DS2780_RARC_REG);
if (ret < 0)
return ret;
@@ -345,7 +357,7 @@
* Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
* LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, &charge_raw, DS2780_RAAC_MSB_REG);
+ ret = ds2780_read16(dev_info, &charge_raw, DS2780_RAAC_MSB_REG);
if (ret < 0)
return ret;
@@ -356,7 +368,7 @@
static int ds2780_get_control_register(struct ds2780_device_info *dev_info,
u8 *control_reg)
{
- return ds2780_read8(dev_info->w1_dev, control_reg, DS2780_CONTROL_REG);
+ return ds2780_read8(dev_info, control_reg, DS2780_CONTROL_REG);
}
static int ds2780_set_control_register(struct ds2780_device_info *dev_info,
@@ -364,7 +376,7 @@
{
int ret;
- ret = ds2780_write(dev_info->w1_dev, &control_reg,
+ ret = ds2780_write(dev_info, &control_reg,
DS2780_CONTROL_REG, sizeof(u8));
if (ret < 0)
return ret;
@@ -503,7 +515,7 @@
struct power_supply *psy = to_power_supply(dev);
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
- ret = ds2780_read8(dev_info->w1_dev, &sense_resistor, DS2780_RSNSP_REG);
+ ret = ds2780_read8(dev_info, &sense_resistor, DS2780_RSNSP_REG);
if (ret < 0)
return ret;
@@ -584,7 +596,7 @@
struct power_supply *psy = to_power_supply(dev);
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
- ret = ds2780_read8(dev_info->w1_dev, &sfr, DS2780_SFR_REG);
+ ret = ds2780_read8(dev_info, &sfr, DS2780_SFR_REG);
if (ret < 0)
return ret;
@@ -611,7 +623,7 @@
return -EINVAL;
}
- ret = ds2780_write(dev_info->w1_dev, &new_setting,
+ ret = ds2780_write(dev_info, &new_setting,
DS2780_SFR_REG, sizeof(u8));
if (ret < 0)
return ret;
@@ -632,7 +644,7 @@
DS2780_EEPROM_BLOCK1_END -
DS2780_EEPROM_BLOCK1_START + 1 - off);
- return ds2780_read_block(dev_info->w1_dev, buf,
+ return ds2780_read_block(dev_info, buf,
DS2780_EEPROM_BLOCK1_START + off, count);
}
@@ -650,7 +662,7 @@
DS2780_EEPROM_BLOCK1_END -
DS2780_EEPROM_BLOCK1_START + 1 - off);
- ret = ds2780_write(dev_info->w1_dev, buf,
+ ret = ds2780_write(dev_info, buf,
DS2780_EEPROM_BLOCK1_START + off, count);
if (ret < 0)
return ret;
@@ -685,9 +697,8 @@
DS2780_EEPROM_BLOCK0_END -
DS2780_EEPROM_BLOCK0_START + 1 - off);
- return ds2780_read_block(dev_info->w1_dev, buf,
+ return ds2780_read_block(dev_info, buf,
DS2780_EEPROM_BLOCK0_START + off, count);
-
}
static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
@@ -704,7 +715,7 @@
DS2780_EEPROM_BLOCK0_END -
DS2780_EEPROM_BLOCK0_START + 1 - off);
- ret = ds2780_write(dev_info->w1_dev, buf,
+ ret = ds2780_write(dev_info, buf,
DS2780_EEPROM_BLOCK0_START + off, count);
if (ret < 0)
return ret;
@@ -768,6 +779,7 @@
dev_info->bat.properties = ds2780_battery_props;
dev_info->bat.num_properties = ARRAY_SIZE(ds2780_battery_props);
dev_info->bat.get_property = ds2780_battery_get_property;
+ dev_info->mutex_holder = current;
ret = power_supply_register(&pdev->dev, &dev_info->bat);
if (ret) {
@@ -797,6 +809,8 @@
goto fail_remove_bin_file;
}
+ dev_info->mutex_holder = NULL;
+
return 0;
fail_remove_bin_file:
@@ -816,6 +830,8 @@
{
struct ds2780_device_info *dev_info = platform_get_drvdata(pdev);
+ dev_info->mutex_holder = current;
+
/* remove attributes */
sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
index 8520a7f..445197d 100644
--- a/drivers/pps/clients/Kconfig
+++ b/drivers/pps/clients/Kconfig
@@ -29,4 +29,13 @@
If you say yes here you get support for a PPS source connected
with the interrupt pin of your parallel port.
+config PPS_CLIENT_GPIO
+ tristate "PPS client using GPIO"
+ depends on PPS && GENERIC_HARDIRQS
+ help
+ If you say yes here you get support for a PPS source using
+ GPIO. To be useful you must also register a platform device
+ specifying the GPIO pin and other options, usually in your board
+ setup.
+
endif
diff --git a/drivers/pps/clients/Makefile b/drivers/pps/clients/Makefile
index 4feb7e9..a461d15 100644
--- a/drivers/pps/clients/Makefile
+++ b/drivers/pps/clients/Makefile
@@ -5,5 +5,6 @@
obj-$(CONFIG_PPS_CLIENT_KTIMER) += pps-ktimer.o
obj-$(CONFIG_PPS_CLIENT_LDISC) += pps-ldisc.o
obj-$(CONFIG_PPS_CLIENT_PARPORT) += pps_parport.o
+obj-$(CONFIG_PPS_CLIENT_GPIO) += pps-gpio.o
ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
new file mode 100644
index 0000000..6550555
--- /dev/null
+++ b/drivers/pps/clients/pps-gpio.c
@@ -0,0 +1,227 @@
+/*
+ * pps-gpio.c -- PPS client driver using GPIO
+ *
+ *
+ * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt>
+ * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define PPS_GPIO_NAME "pps-gpio"
+#define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pps_kernel.h>
+#include <linux/pps-gpio.h>
+#include <linux/gpio.h>
+#include <linux/list.h>
+
+/* Info for each registered platform device */
+struct pps_gpio_device_data {
+ int irq; /* IRQ used as PPS source */
+ struct pps_device *pps; /* PPS source device */
+ struct pps_source_info info; /* PPS source information */
+ const struct pps_gpio_platform_data *pdata;
+};
+
+/*
+ * Report the PPS event
+ */
+
+static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
+{
+ const struct pps_gpio_device_data *info;
+ struct pps_event_time ts;
+ int rising_edge;
+
+ /* Get the time stamp first */
+ pps_get_ts(&ts);
+
+ info = data;
+
+ rising_edge = gpio_get_value(info->pdata->gpio_pin);
+ if ((rising_edge && !info->pdata->assert_falling_edge) ||
+ (!rising_edge && info->pdata->assert_falling_edge))
+ pps_event(info->pps, &ts, PPS_CAPTUREASSERT, NULL);
+ else if (info->pdata->capture_clear &&
+ ((rising_edge && info->pdata->assert_falling_edge) ||
+ (!rising_edge && !info->pdata->assert_falling_edge)))
+ pps_event(info->pps, &ts, PPS_CAPTURECLEAR, NULL);
+
+ return IRQ_HANDLED;
+}
+
+static int pps_gpio_setup(struct platform_device *pdev)
+{
+ int ret;
+ const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+ ret = gpio_request(pdata->gpio_pin, pdata->gpio_label);
+ if (ret) {
+ pr_warning("failed to request GPIO %u\n", pdata->gpio_pin);
+ return -EINVAL;
+ }
+
+ ret = gpio_direction_input(pdata->gpio_pin);
+ if (ret) {
+ pr_warning("failed to set pin direction\n");
+ gpio_free(pdata->gpio_pin);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long
+get_irqf_trigger_flags(const struct pps_gpio_platform_data *pdata)
+{
+ unsigned long flags = pdata->assert_falling_edge ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+
+ if (pdata->capture_clear) {
+ flags |= ((flags & IRQF_TRIGGER_RISING) ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING);
+ }
+
+ return flags;
+}
+
+static int pps_gpio_probe(struct platform_device *pdev)
+{
+ struct pps_gpio_device_data *data;
+ int irq;
+ int ret;
+ int err;
+ int pps_default_params;
+ const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+
+ /* GPIO setup */
+ ret = pps_gpio_setup(pdev);
+ if (ret)
+ return -EINVAL;
+
+ /* IRQ setup */
+ irq = gpio_to_irq(pdata->gpio_pin);
+ if (irq < 0) {
+ pr_err("failed to map GPIO to IRQ: %d\n", irq);
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ /* allocate space for device info */
+ data = kzalloc(sizeof(struct pps_gpio_device_data), GFP_KERNEL);
+ if (data == NULL) {
+ err = -ENOMEM;
+ goto return_error;
+ }
+
+ /* initialize PPS specific parts of the bookkeeping data structure. */
+ data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+ PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC;
+ if (pdata->capture_clear)
+ data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR |
+ PPS_ECHOCLEAR;
+ data->info.owner = THIS_MODULE;
+ snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d",
+ pdev->name, pdev->id);
+
+ /* register PPS source */
+ pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT;
+ if (pdata->capture_clear)
+ pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR;
+ data->pps = pps_register_source(&data->info, pps_default_params);
+ if (data->pps == NULL) {
+ kfree(data);
+ pr_err("failed to register IRQ %d as PPS source\n", irq);
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ data->irq = irq;
+ data->pdata = pdata;
+
+ /* register IRQ interrupt handler */
+ ret = request_irq(irq, pps_gpio_irq_handler,
+ get_irqf_trigger_flags(pdata), data->info.name, data);
+ if (ret) {
+ pps_unregister_source(data->pps);
+ kfree(data);
+ pr_err("failed to acquire IRQ %d\n", irq);
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ platform_set_drvdata(pdev, data);
+ dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", irq);
+
+ return 0;
+
+return_error:
+ gpio_free(pdata->gpio_pin);
+ return err;
+}
+
+static int pps_gpio_remove(struct platform_device *pdev)
+{
+ struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
+ const struct pps_gpio_platform_data *pdata = data->pdata;
+
+ platform_set_drvdata(pdev, NULL);
+ free_irq(data->irq, data);
+ gpio_free(pdata->gpio_pin);
+ pps_unregister_source(data->pps);
+ pr_info("removed IRQ %d as PPS source\n", data->irq);
+ kfree(data);
+ return 0;
+}
+
+static struct platform_driver pps_gpio_driver = {
+ .probe = pps_gpio_probe,
+ .remove = __devexit_p(pps_gpio_remove),
+ .driver = {
+ .name = PPS_GPIO_NAME,
+ .owner = THIS_MODULE
+ },
+};
+
+static int __init pps_gpio_init(void)
+{
+ int ret = platform_driver_register(&pps_gpio_driver);
+ if (ret < 0)
+ pr_err("failed to register platform driver\n");
+ return ret;
+}
+
+static void __exit pps_gpio_exit(void)
+{
+ platform_driver_unregister(&pps_gpio_driver);
+ pr_debug("unregistered platform driver\n");
+}
+
+module_init(pps_gpio_init);
+module_exit(pps_gpio_exit);
+
+MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>");
+MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>");
+MODULE_DESCRIPTION("Use GPIO pin as PPS source");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c
index 82583b0..436b4e4 100644
--- a/drivers/pps/clients/pps-ktimer.c
+++ b/drivers/pps/clients/pps-ktimer.c
@@ -52,17 +52,6 @@
}
/*
- * The echo function
- */
-
-static void pps_ktimer_echo(struct pps_device *pps, int event, void *data)
-{
- dev_info(pps->dev, "echo %s %s\n",
- event & PPS_CAPTUREASSERT ? "assert" : "",
- event & PPS_CAPTURECLEAR ? "clear" : "");
-}
-
-/*
* The PPS info struct
*/
@@ -72,7 +61,6 @@
.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
PPS_ECHOASSERT |
PPS_CANWAIT | PPS_TSFMT_TSPEC,
- .echo = pps_ktimer_echo,
.owner = THIS_MODULE,
};
diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c
index c571d6d..e1b4705 100644
--- a/drivers/pps/clients/pps_parport.c
+++ b/drivers/pps/clients/pps_parport.c
@@ -133,14 +133,6 @@
return;
}
-/* the PPS echo function */
-static void pps_echo(struct pps_device *pps, int event, void *data)
-{
- dev_info(pps->dev, "echo %s %s\n",
- event & PPS_CAPTUREASSERT ? "assert" : "",
- event & PPS_CAPTURECLEAR ? "clear" : "");
-}
-
static void parport_attach(struct parport *port)
{
struct pps_client_pp *device;
@@ -151,7 +143,6 @@
PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \
PPS_ECHOASSERT | PPS_ECHOCLEAR | \
PPS_CANWAIT | PPS_TSFMT_TSPEC,
- .echo = pps_echo,
.owner = THIS_MODULE,
.dev = NULL
};
diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c
index a4e8eb9..f197e8e 100644
--- a/drivers/pps/kapi.c
+++ b/drivers/pps/kapi.c
@@ -52,6 +52,14 @@
ts->sec += offset->sec;
}
+static void pps_echo_client_default(struct pps_device *pps, int event,
+ void *data)
+{
+ dev_info(pps->dev, "echo %s %s\n",
+ event & PPS_CAPTUREASSERT ? "assert" : "",
+ event & PPS_CAPTURECLEAR ? "clear" : "");
+}
+
/*
* Exported functions
*/
@@ -80,13 +88,6 @@
err = -EINVAL;
goto pps_register_source_exit;
}
- if ((info->mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) != 0 &&
- info->echo == NULL) {
- pr_err("%s: echo function is not defined\n",
- info->name);
- err = -EINVAL;
- goto pps_register_source_exit;
- }
if ((info->mode & (PPS_TSFMT_TSPEC | PPS_TSFMT_NTPFP)) == 0) {
pr_err("%s: unspecified time format\n",
info->name);
@@ -108,6 +109,11 @@
pps->params.mode = default_params;
pps->info = *info;
+ /* check for default echo function */
+ if ((pps->info.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) &&
+ pps->info.echo == NULL)
+ pps->info.echo = pps_echo_client_default;
+
init_waitqueue_head(&pps->queue);
spin_lock_init(&pps->lock);
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 070211a..bc87192 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,6 +1,8 @@
#
# RapidIO configuration
#
+source "drivers/rapidio/devices/Kconfig"
+
config RAPIDIO_DISC_TIMEOUT
int "Discovery timeout duration (seconds)"
depends on RAPIDIO
@@ -20,8 +22,6 @@
ports for Input/Output direction to allow other traffic
than Maintenance transfers.
-source "drivers/rapidio/switches/Kconfig"
-
config RAPIDIO_DEBUG
bool "RapidIO subsystem debug messages"
depends on RAPIDIO
@@ -32,3 +32,5 @@
going on.
If you are unsure about this, say N here.
+
+source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index 89b8eca..ec3fb81 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -4,5 +4,6 @@
obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
obj-$(CONFIG_RAPIDIO) += switches/
+obj-$(CONFIG_RAPIDIO) += devices/
subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG
diff --git a/drivers/rapidio/devices/Kconfig b/drivers/rapidio/devices/Kconfig
new file mode 100644
index 0000000..12a9d7f
--- /dev/null
+++ b/drivers/rapidio/devices/Kconfig
@@ -0,0 +1,10 @@
+#
+# RapidIO master port configuration
+#
+
+config RAPIDIO_TSI721
+ bool "IDT Tsi721 PCI Express SRIO Controller support"
+ depends on RAPIDIO && PCIEPORTBUS
+ default "n"
+ ---help---
+ Include support for IDT Tsi721 PCI Express Serial RapidIO controller.
diff --git a/drivers/rapidio/devices/Makefile b/drivers/rapidio/devices/Makefile
new file mode 100644
index 0000000..3b7b4e2
--- /dev/null
+++ b/drivers/rapidio/devices/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for RapidIO devices
+#
+
+obj-$(CONFIG_RAPIDIO_TSI721) += tsi721.o
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
new file mode 100644
index 0000000..5225930
--- /dev/null
+++ b/drivers/rapidio/devices/tsi721.c
@@ -0,0 +1,2360 @@
+/*
+ * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
+ *
+ * Copyright 2011 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * Chul Kim <chul.kim@idt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+
+#include "tsi721.h"
+
+#define DEBUG_PW /* Inbound Port-Write debugging */
+
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
+
+/**
+ * tsi721_lcread - read from local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a local SREP space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ *data = ioread32(priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_lcwrite - write into local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a local write into SREP configuration space. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ iowrite32(data, priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_maint_dma - Helper function to generate RapidIO maintenance
+ * transactions using designated Tsi721 DMA channel.
+ * @priv: pointer to tsi721 private data
+ * @sys_size: RapdiIO transport system size
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Location to be read from or write into
+ * @do_wr: Operation flag (1 == MAINT_WR)
+ *
+ * Generates a RapidIO maintenance transaction (Read or Write).
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
+ u16 destid, u8 hopcount, u32 offset, int len,
+ u32 *data, int do_wr)
+{
+ struct tsi721_dma_desc *bd_ptr;
+ u32 rd_count, swr_ptr, ch_stat;
+ int i, err = 0;
+ u32 op = do_wr ? MAINT_WR : MAINT_RD;
+
+ if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
+ return -EINVAL;
+
+ bd_ptr = priv->bdma[TSI721_DMACH_MAINT].bd_base;
+
+ rd_count = ioread32(
+ priv->regs + TSI721_DMAC_DRDCNT(TSI721_DMACH_MAINT));
+
+ /* Initialize DMA descriptor */
+ bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
+ bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
+ bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
+ bd_ptr[0].raddr_hi = 0;
+ if (do_wr)
+ bd_ptr[0].data[0] = cpu_to_be32p(data);
+ else
+ bd_ptr[0].data[0] = 0xffffffff;
+
+ mb();
+
+ /* Start DMA operation */
+ iowrite32(rd_count + 2,
+ priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
+ ioread32(priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
+ i = 0;
+
+ /* Wait until DMA transfer is finished */
+ while ((ch_stat = ioread32(priv->regs +
+ TSI721_DMAC_STS(TSI721_DMACH_MAINT))) & TSI721_DMAC_STS_RUN) {
+ udelay(1);
+ if (++i >= 5000000) {
+ dev_dbg(&priv->pdev->dev,
+ "%s : DMA[%d] read timeout ch_status=%x\n",
+ __func__, TSI721_DMACH_MAINT, ch_stat);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+ }
+
+ if (ch_stat & TSI721_DMAC_STS_ABORT) {
+ /* If DMA operation aborted due to error,
+ * reinitialize DMA channel
+ */
+ dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n",
+ __func__, ch_stat);
+ dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n",
+ do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset);
+ iowrite32(TSI721_DMAC_INT_ALL,
+ priv->regs + TSI721_DMAC_INT(TSI721_DMACH_MAINT));
+ iowrite32(TSI721_DMAC_CTL_INIT,
+ priv->regs + TSI721_DMAC_CTL(TSI721_DMACH_MAINT));
+ udelay(10);
+ iowrite32(0, priv->regs +
+ TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
+ udelay(1);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+
+ if (!do_wr)
+ *data = be32_to_cpu(bd_ptr[0].data[0]);
+
+ /*
+ * Update descriptor status FIFO RD pointer.
+ * NOTE: Skipping check and clear FIFO entries because we are waiting
+ * for transfer to be completed.
+ */
+ swr_ptr = ioread32(priv->regs + TSI721_DMAC_DSWP(TSI721_DMACH_MAINT));
+ iowrite32(swr_ptr, priv->regs + TSI721_DMAC_DSRP(TSI721_DMACH_MAINT));
+err_out:
+
+ return err;
+}
+
+/**
+ * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
+ * using Tsi721 BDMA engine.
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a RapidIO maintenance read transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, data, 0);
+}
+
+/**
+ * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
+ * using Tsi721 BDMA engine
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates a RapidIO maintenance write transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 temp = data;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, &temp, 1);
+}
+
+/**
+ * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
+ * @mport: RapidIO master port structure
+ *
+ * Handles inbound port-write interrupts. Copies PW message from an internal
+ * buffer into PW message FIFO and schedules deferred routine to process
+ * queued messages.
+ */
+static int
+tsi721_pw_handler(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 pw_stat;
+ u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
+
+
+ pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
+ pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
+ pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
+ pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
+ pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
+
+ /* Queue PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ spin_lock(&priv->pw_fifo_lock);
+ if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
+ kfifo_in(&priv->pw_fifo, pw_buf,
+ TSI721_RIO_PW_MSG_SIZE);
+ else
+ priv->pw_discard_count++;
+ spin_unlock(&priv->pw_fifo_lock);
+ }
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ schedule_work(&priv->pw_work);
+
+ return 0;
+}
+
+static void tsi721_pw_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ pw_work);
+ u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message
+ buffer for RIO layer */
+
+ /*
+ * Process port-write messages
+ */
+ while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer,
+ TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
+ /* Process one message */
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ pr_debug("%s : Port-Write Message:", __func__);
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) {
+ pr_debug("0x%02x: %08x %08x %08x %08x", i*4,
+ msg_buffer[i], msg_buffer[i + 1],
+ msg_buffer[i + 2], msg_buffer[i + 3]);
+ i += 4;
+ }
+ pr_debug("\n");
+ }
+#endif
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+ }
+}
+
+/**
+ * tsi721_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+static int tsi721_pw_enable(struct rio_mport *mport, int enable)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rval;
+
+ rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ if (enable)
+ rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
+ else
+ rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+ /* Update enable bits */
+ iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ return 0;
+}
+
+/**
+ * tsi721_dsend - Send a RapidIO doorbell
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell
+ *
+ * Sends a RapidIO doorbell message. Always returns %0.
+ */
+static int tsi721_dsend(struct rio_mport *mport, int index,
+ u16 destid, u16 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 offset;
+
+ offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
+ (destid << 2);
+
+ dev_dbg(&priv->pdev->dev,
+ "Send Doorbell 0x%04x to destID 0x%x\n", data, destid);
+ iowrite16be(data, priv->odb_base + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
+ * @mport: RapidIO master port structure
+ *
+ * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
+ * buffer into DB message FIFO and schedules deferred routine to process
+ * queued DBs.
+ */
+static int
+tsi721_dbell_handler(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 regval;
+
+ /* Disable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval &= ~TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ schedule_work(&priv->idb_work);
+
+ return 0;
+}
+
+static void tsi721_db_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ idb_work);
+ struct rio_mport *mport;
+ struct rio_dbell *dbell;
+ int found = 0;
+ u32 wr_ptr, rd_ptr;
+ u64 *idb_entry;
+ u32 regval;
+ union {
+ u64 msg;
+ u8 bytes[8];
+ } idb;
+
+ /*
+ * Process queued inbound doorbells
+ */
+ mport = priv->mport;
+
+ wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE));
+ rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ while (wr_ptr != rd_ptr) {
+ idb_entry = (u64 *)(priv->idb_base +
+ (TSI721_IDB_ENTRY_SIZE * rd_ptr));
+ rd_ptr++;
+ idb.msg = *idb_entry;
+ *idb_entry = 0;
+
+ /* Process one doorbell */
+ list_for_each_entry(dbell, &mport->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
+ (dbell->res->end >= DBELL_INF(idb.bytes))) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
+ DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+ } else {
+ dev_dbg(&priv->pdev->dev,
+ "spurious inb doorbell, sid %2.2x tid %2.2x"
+ " info %4.4x\n", DBELL_SID(idb.bytes),
+ DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+ }
+ }
+
+ iowrite32(rd_ptr & (IDB_QSIZE - 1),
+ priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ /* Re-enable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval |= TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+}
+
+/**
+ * tsi721_irqhandler - Tsi721 interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
+ * interrupt events and calls an event-specific handler(s).
+ */
+static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
+{
+ struct rio_mport *mport = (struct rio_mport *)ptr;
+ struct tsi721_device *priv = mport->priv;
+ u32 dev_int;
+ u32 dev_ch_int;
+ u32 intval;
+ u32 ch_inte;
+
+ dev_int = ioread32(priv->regs + TSI721_DEV_INT);
+ if (!dev_int)
+ return IRQ_NONE;
+
+ dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
+
+ if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
+ /* Service SR2PC Channel interrupts */
+ if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
+ /* Service Inbound Doorbell interrupt */
+ intval = ioread32(priv->regs +
+ TSI721_SR_CHINT(IDB_QUEUE));
+ if (intval & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler(mport);
+ else
+ dev_info(&priv->pdev->dev,
+ "Unsupported SR_CH_INT %x\n", intval);
+
+ /* Clear interrupts */
+ iowrite32(intval,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SMSG_CH) {
+ int ch;
+
+ /*
+ * Service channel interrupts from Messaging Engine
+ */
+
+ if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Inbound Message interrupt for each MBOX
+ */
+ for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
+ if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
+ continue;
+ tsi721_imsg_handler(priv, ch);
+ }
+ }
+
+ if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Outbound Message interrupts for each MBOX
+ */
+
+ for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
+ if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
+ continue;
+ tsi721_omsg_handler(priv, ch);
+ }
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SRIO) {
+ /* Service SRIO MAC interrupts */
+ intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler(mport);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void tsi721_interrupts_init(struct tsi721_device *priv)
+{
+ u32 intr;
+
+ /* Enable IDB interrupts */
+ iowrite32(TSI721_SR_CHINT_ALL,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ iowrite32(TSI721_SR_CHINT_IDBQRCV,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ iowrite32(TSI721_INT_SR2PC_CHAN(IDB_QUEUE),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /* Enable SRIO MAC interrupts */
+ iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
+ priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+
+ if (priv->flags & TSI721_USING_MSIX)
+ intr = TSI721_DEV_INT_SRIO;
+ else
+ intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+ TSI721_DEV_INT_SMSG_CH;
+
+ iowrite32(intr, priv->regs + TSI721_DEV_INTE);
+ ioread32(priv->regs + TSI721_DEV_INTE);
+}
+
+#ifdef CONFIG_PCI_MSI
+/**
+ * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles outbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
+ tsi721_omsg_handler(priv, mbox);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles inbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
+ tsi721_imsg_handler(priv, mbox + 4);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts from SRIO MAC.
+ */
+static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ u32 srio_int;
+
+ /* Service SRIO MAC interrupts */
+ srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler((struct rio_mport *)ptr);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts from SR2PC Channel.
+ * NOTE: At this moment services only one SR2PC channel associated with inbound
+ * doorbells.
+ */
+static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ u32 sr_ch_int;
+
+ /* Service Inbound DB interrupt from SR2PC channel */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler((struct rio_mport *)ptr);
+
+ /* Clear interrupts */
+ iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ /* Read back to ensure that interrupt was cleared */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_request_msix - register interrupt service for MSI-X mode.
+ * @mport: RapidIO master port structure
+ *
+ * Registers MSI-X interrupt service routines for interrupts that are active
+ * immediately after mport initialization. Messaging interrupt service routines
+ * should be registered during corresponding open requests.
+ */
+static int tsi721_request_msix(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ int err = 0;
+
+ err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
+ tsi721_sr2pc_ch_msix, 0,
+ priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport);
+ if (err)
+ goto out;
+
+ err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
+ tsi721_srio_msix, 0,
+ priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport);
+ if (err)
+ free_irq(
+ priv->msix[TSI721_VECT_IDB].vector,
+ (void *)mport);
+out:
+ return err;
+}
+
+/**
+ * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures MSI-X support for Tsi721. Supports only an exact number
+ * of requested vectors.
+ */
+static int tsi721_enable_msix(struct tsi721_device *priv)
+{
+ struct msix_entry entries[TSI721_VECT_MAX];
+ int err;
+ int i;
+
+ entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
+ entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
+
+ /*
+ * Initialize MSI-X entries for Messaging Engine:
+ * this driver supports four RIO mailboxes (inbound and outbound)
+ * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
+ * offset +4 is added to IB MBOX number.
+ */
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ entries[TSI721_VECT_IMB0_RCV + i].entry =
+ TSI721_MSIX_IMSG_DQ_RCV(i + 4);
+ entries[TSI721_VECT_IMB0_INT + i].entry =
+ TSI721_MSIX_IMSG_INT(i + 4);
+ entries[TSI721_VECT_OMB0_DONE + i].entry =
+ TSI721_MSIX_OMSG_DONE(i);
+ entries[TSI721_VECT_OMB0_INT + i].entry =
+ TSI721_MSIX_OMSG_INT(i);
+ }
+
+ err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries));
+ if (err) {
+ if (err > 0)
+ dev_info(&priv->pdev->dev,
+ "Only %d MSI-X vectors available, "
+ "not using MSI-X\n", err);
+ return err;
+ }
+
+ /*
+ * Copy MSI-X vector information into tsi721 private structure
+ */
+ priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
+ snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
+ priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
+ snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
+
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
+ entries[TSI721_VECT_IMB0_RCV + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_IMB0_INT + i].vector =
+ entries[TSI721_VECT_IMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
+ entries[TSI721_VECT_OMB0_DONE + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_INT + i].vector =
+ entries[TSI721_VECT_OMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
+ i, pci_name(priv->pdev));
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int tsi721_request_irq(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ int err;
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX)
+ err = tsi721_request_msix(mport);
+ else
+#endif
+ err = request_irq(priv->pdev->irq, tsi721_irqhandler,
+ (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
+ DRV_NAME, (void *)mport);
+
+ if (err)
+ dev_err(&priv->pdev->dev,
+ "Unable to allocate interrupt, Error: %d\n", err);
+
+ return err;
+}
+
+/**
+ * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables SREP translation regions.
+ */
+static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
+{
+ int i;
+
+ /* Disable all PC2SR translation windows */
+ for (i = 0; i < TSI721_OBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_OBWINLB(i));
+}
+
+/**
+ * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables inbound windows.
+ */
+static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
+{
+ int i;
+
+ /* Disable all SR2PC inbound windows */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_IBWINLB(i));
+}
+
+/**
+ * tsi721_port_write_init - Inbound port write interface init
+ * @priv: pointer to tsi721 private data
+ *
+ * Initializes inbound port write handler.
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_port_write_init(struct tsi721_device *priv)
+{
+ priv->pw_discard_count = 0;
+ INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
+ spin_lock_init(&priv->pw_fifo_lock);
+ if (kfifo_alloc(&priv->pw_fifo,
+ TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* Use reliable port-write capture mode */
+ iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
+ return 0;
+}
+
+static int tsi721_doorbell_init(struct tsi721_device *priv)
+{
+ /* Outbound Doorbells do not require any setup.
+ * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
+ * That BAR1 was mapped during the probe routine.
+ */
+
+ /* Initialize Inbound Doorbell processing DPC and queue */
+ priv->db_discard_count = 0;
+ INIT_WORK(&priv->idb_work, tsi721_db_dpc);
+
+ /* Allocate buffer for inbound doorbells queue */
+ priv->idb_base = dma_alloc_coherent(&priv->pdev->dev,
+ IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ &priv->idb_dma, GFP_KERNEL);
+ if (!priv->idb_base)
+ return -ENOMEM;
+
+ memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE);
+
+ dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n",
+ priv->idb_base, (unsigned long long)priv->idb_dma);
+
+ iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
+ priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma >> 32),
+ priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
+ priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
+ /* Enable accepting all inbound doorbells */
+ iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
+
+ iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
+
+ iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ return 0;
+}
+
+static void tsi721_doorbell_free(struct tsi721_device *priv)
+{
+ if (priv->idb_base == NULL)
+ return;
+
+ /* Free buffer allocated for inbound doorbell queue */
+ dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ priv->idb_base, priv->idb_dma);
+ priv->idb_base = NULL;
+}
+
+static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum)
+{
+ struct tsi721_dma_desc *bd_ptr;
+ u64 *sts_ptr;
+ dma_addr_t bd_phys, sts_phys;
+ int sts_size;
+ int bd_num = priv->bdma[chnum].bd_num;
+
+ dev_dbg(&priv->pdev->dev, "Init Block DMA Engine, CH%d\n", chnum);
+
+ /*
+ * Initialize DMA channel for maintenance requests
+ */
+
+ /* Allocate space for DMA descriptors */
+ bd_ptr = dma_alloc_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ &bd_phys, GFP_KERNEL);
+ if (!bd_ptr)
+ return -ENOMEM;
+
+ priv->bdma[chnum].bd_phys = bd_phys;
+ priv->bdma[chnum].bd_base = bd_ptr;
+
+ memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc));
+
+ dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n",
+ bd_ptr, (unsigned long long)bd_phys);
+
+ /* Allocate space for descriptor status FIFO */
+ sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
+ bd_num : TSI721_DMA_MINSTSSZ;
+ sts_size = roundup_pow_of_two(sts_size);
+ sts_ptr = dma_alloc_coherent(&priv->pdev->dev,
+ sts_size * sizeof(struct tsi721_dma_sts),
+ &sts_phys, GFP_KERNEL);
+ if (!sts_ptr) {
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ bd_ptr, bd_phys);
+ priv->bdma[chnum].bd_base = NULL;
+ return -ENOMEM;
+ }
+
+ priv->bdma[chnum].sts_phys = sts_phys;
+ priv->bdma[chnum].sts_base = sts_ptr;
+ priv->bdma[chnum].sts_size = sts_size;
+
+ memset(sts_ptr, 0, sts_size);
+
+ dev_dbg(&priv->pdev->dev,
+ "desc status FIFO @ %p (phys = %llx) size=0x%x\n",
+ sts_ptr, (unsigned long long)sts_phys, sts_size);
+
+ /* Initialize DMA descriptors ring */
+ bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
+ bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
+ TSI721_DMAC_DPTRL_MASK);
+ bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
+
+ /* Setup DMA descriptor pointers */
+ iowrite32(((u64)bd_phys >> 32),
+ priv->regs + TSI721_DMAC_DPTRH(chnum));
+ iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
+ priv->regs + TSI721_DMAC_DPTRL(chnum));
+
+ /* Setup descriptor status FIFO */
+ iowrite32(((u64)sts_phys >> 32),
+ priv->regs + TSI721_DMAC_DSBH(chnum));
+ iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
+ priv->regs + TSI721_DMAC_DSBL(chnum));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
+ priv->regs + TSI721_DMAC_DSSZ(chnum));
+
+ /* Clear interrupt bits */
+ iowrite32(TSI721_DMAC_INT_ALL,
+ priv->regs + TSI721_DMAC_INT(chnum));
+
+ ioread32(priv->regs + TSI721_DMAC_INT(chnum));
+
+ /* Toggle DMA channel initialization */
+ iowrite32(TSI721_DMAC_CTL_INIT, priv->regs + TSI721_DMAC_CTL(chnum));
+ ioread32(priv->regs + TSI721_DMAC_CTL(chnum));
+ udelay(10);
+
+ return 0;
+}
+
+static int tsi721_bdma_ch_free(struct tsi721_device *priv, int chnum)
+{
+ u32 ch_stat;
+
+ if (priv->bdma[chnum].bd_base == NULL)
+ return 0;
+
+ /* Check if DMA channel still running */
+ ch_stat = ioread32(priv->regs + TSI721_DMAC_STS(chnum));
+ if (ch_stat & TSI721_DMAC_STS_RUN)
+ return -EFAULT;
+
+ /* Put DMA channel into init state */
+ iowrite32(TSI721_DMAC_CTL_INIT,
+ priv->regs + TSI721_DMAC_CTL(chnum));
+
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->bdma[chnum].bd_num * sizeof(struct tsi721_dma_desc),
+ priv->bdma[chnum].bd_base, priv->bdma[chnum].bd_phys);
+ priv->bdma[chnum].bd_base = NULL;
+
+ /* Free space allocated for status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->bdma[chnum].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->bdma[chnum].sts_base, priv->bdma[chnum].sts_phys);
+ priv->bdma[chnum].sts_base = NULL;
+ return 0;
+}
+
+static int tsi721_bdma_init(struct tsi721_device *priv)
+{
+ /* Initialize BDMA channel allocated for RapidIO maintenance read/write
+ * request generation
+ */
+ priv->bdma[TSI721_DMACH_MAINT].bd_num = 2;
+ if (tsi721_bdma_ch_init(priv, TSI721_DMACH_MAINT)) {
+ dev_err(&priv->pdev->dev, "Unable to initialize maintenance DMA"
+ " channel %d, aborting\n", TSI721_DMACH_MAINT);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void tsi721_bdma_free(struct tsi721_device *priv)
+{
+ tsi721_bdma_ch_free(priv, TSI721_DMACH_MAINT);
+}
+
+/* Enable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Enable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Disable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Enable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Enable Outbound Messaging channel interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Disable Outbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/**
+ * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ */
+static int
+tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *desc;
+ u32 tx_slot;
+
+ if (!priv->omsg_init[mbox] ||
+ len > TSI721_MSG_MAX_SIZE || len < 8)
+ return -EINVAL;
+
+ tx_slot = priv->omsg_ring[mbox].tx_slot;
+
+ /* Copy copy message into transfer buffer */
+ memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
+
+ if (len & 0x7)
+ len += 8;
+
+ /* Build descriptor associated with buffer */
+ desc = priv->omsg_ring[mbox].omd_base;
+ desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
+ if (tx_slot % 4 == 0)
+ desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
+
+ desc[tx_slot].msg_info =
+ cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
+ (0xe << 12) | (len & 0xff8));
+ desc[tx_slot].bufptr_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
+ 0xffffffff);
+ desc[tx_slot].bufptr_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
+
+ priv->omsg_ring[mbox].wr_count++;
+
+ /* Go to next descriptor */
+ if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
+ priv->omsg_ring[mbox].tx_slot = 0;
+ /* Move through the ring link descriptor at the end */
+ priv->omsg_ring[mbox].wr_count++;
+ }
+
+ mb();
+
+ /* Set new write count value */
+ iowrite32(priv->omsg_ring[mbox].wr_count,
+ priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+
+ return 0;
+}
+
+/**
+ * tsi721_omsg_handler - Outbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: number of OB MSG channel to service
+ *
+ * Services channel interrupts from outbound messaging engine.
+ */
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 omsg_int;
+
+ spin_lock(&priv->omsg_ring[ch].lock);
+
+ omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
+ dev_info(&priv->pdev->dev,
+ "OB MBOX%d: Status FIFO is full\n", ch);
+
+ if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
+ u32 srd_ptr;
+ u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
+ int i, j;
+ u32 tx_slot;
+
+ /*
+ * Find last successfully processed descriptor
+ */
+
+ /* Check and clear descriptor status FIFO entries */
+ srd_ptr = priv->omsg_ring[ch].sts_rdptr;
+ sts_ptr = priv->omsg_ring[ch].sts_base;
+ j = srd_ptr * 8;
+ while (sts_ptr[j]) {
+ for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
+ prev_ptr = last_ptr;
+ last_ptr = le64_to_cpu(sts_ptr[j]);
+ sts_ptr[j] = 0;
+ }
+
+ ++srd_ptr;
+ srd_ptr %= priv->omsg_ring[ch].sts_size;
+ j = srd_ptr * 8;
+ }
+
+ if (last_ptr == 0)
+ goto no_sts_update;
+
+ priv->omsg_ring[ch].sts_rdptr = srd_ptr;
+ iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
+
+ if (!priv->mport->outb_msg[ch].mcback)
+ goto no_sts_update;
+
+ /* Inform upper layer about transfer completion */
+
+ tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+
+ /*
+ * Check if this is a Link Descriptor (LD).
+ * If yes, ignore LD and use descriptor processed
+ * before LD.
+ */
+ if (tx_slot == priv->omsg_ring[ch].size) {
+ if (prev_ptr)
+ tx_slot = (prev_ptr -
+ (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+ else
+ goto no_sts_update;
+ }
+
+ /* Move slot index to the next message to be sent */
+ ++tx_slot;
+ if (tx_slot == priv->omsg_ring[ch].size)
+ tx_slot = 0;
+ BUG_ON(tx_slot >= priv->omsg_ring[ch].size);
+ priv->mport->outb_msg[ch].mcback(priv->mport,
+ priv->omsg_ring[ch].dev_id, ch,
+ tx_slot);
+ }
+
+no_sts_update:
+
+ if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
+ /*
+ * Outbound message operation aborted due to error,
+ * reinitialize OB MSG channel
+ */
+
+ dev_dbg(&priv->pdev->dev, "OB MSG ABORT ch_stat=%x\n",
+ ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
+
+ iowrite32(TSI721_OBDMAC_INT_ERROR,
+ priv->regs + TSI721_OBDMAC_INT(ch));
+ iowrite32(TSI721_OBDMAC_CTL_INIT,
+ priv->regs + TSI721_OBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
+
+ /* Inform upper level to clear all pending tx slots */
+ if (priv->mport->outb_msg[ch].mcback)
+ priv->mport->outb_msg[ch].mcback(priv->mport,
+ priv->omsg_ring[ch].dev_id, ch,
+ priv->omsg_ring[ch].tx_slot);
+ /* Synch tx_slot tracking */
+ iowrite32(priv->omsg_ring[ch].tx_slot,
+ priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
+ priv->omsg_ring[ch].sts_rdptr = 0;
+ }
+
+ /* Clear channel interrupts */
+ iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->omsg_ring[ch].lock);
+}
+
+/**
+ * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
+ * @mport: Master port implementing Outbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ */
+static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *bd_ptr;
+ int i, rc = 0;
+
+ if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
+ (entries > (TSI721_OMSGD_RING_SIZE)) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ priv->omsg_ring[mbox].dev_id = dev_id;
+ priv->omsg_ring[mbox].size = entries;
+ priv->omsg_ring[mbox].sts_rdptr = 0;
+ spin_lock_init(&priv->omsg_ring[mbox].lock);
+
+ /* Outbound Msg Buffer allocation based on
+ the number of maximum descriptor entries */
+ for (i = 0; i < entries; i++) {
+ priv->omsg_ring[mbox].omq_base[i] =
+ dma_alloc_coherent(
+ &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
+ &priv->omsg_ring[mbox].omq_phys[i],
+ GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate OB MSG data buffer for"
+ " MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+ }
+
+ /* Outbound message descriptor allocation */
+ priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
+ &priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omd_base == NULL) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate OB MSG descriptor memory "
+ "for MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ priv->omsg_ring[mbox].tx_slot = 0;
+
+ /* Outbound message descriptor status FIFO allocation */
+ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
+ priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size *
+ sizeof(struct tsi721_dma_sts),
+ &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL);
+ if (priv->omsg_ring[mbox].sts_base == NULL) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate OB MSG descriptor status FIFO "
+ "for MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_desc;
+ }
+
+ memset(priv->omsg_ring[mbox].sts_base, 0,
+ entries * sizeof(struct tsi721_dma_sts));
+
+ /*
+ * Configure Outbound Messaging Engine
+ */
+
+ /* Setup Outbound Message descriptor pointer */
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DPTRH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK),
+ priv->regs + TSI721_OBDMAC_DPTRL(mbox));
+
+ /* Setup Outbound Message descriptor status FIFO */
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DSBH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
+ TSI721_OBDMAC_DSBL_MASK),
+ priv->regs + TSI721_OBDMAC_DSBL(mbox));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
+ priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(
+ priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ tsi721_omsg_msix, 0,
+ priv->msix[TSI721_VECT_OMB0_DONE + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "OBOX%d-DONE\n", mbox);
+ goto out_stat;
+ }
+
+ rc = request_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+ tsi721_omsg_msix, 0,
+ priv->msix[TSI721_VECT_OMB0_INT + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "MBOX%d-INT\n", mbox);
+ free_irq(
+ priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ (void *)mport);
+ goto out_stat;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+ /* Initialize Outbound Message descriptors ring */
+ bd_ptr = priv->omsg_ring[mbox].omd_base;
+ bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
+ bd_ptr[entries].msg_info = 0;
+ bd_ptr[entries].next_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK);
+ bd_ptr[entries].next_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
+ priv->omsg_ring[mbox].wr_count = 0;
+ mb();
+
+ /* Initialize Outbound Message engine */
+ iowrite32(TSI721_OBDMAC_CTL_INIT, priv->regs + TSI721_OBDMAC_CTL(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ udelay(10);
+
+ priv->omsg_init[mbox] = 1;
+
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_stat:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+out_buf:
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 i;
+
+ if (!priv->omsg_init[mbox])
+ return;
+ priv->omsg_init[mbox] = 0;
+
+ /* Disable Interrupts */
+
+ tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ (void *)mport);
+ free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+ (void *)mport);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Free OMSG Descriptor Status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+
+ /* Free OMSG descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ (priv->omsg_ring[mbox].size + 1) *
+ sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+ /* Free message buffers */
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+}
+
+/**
+ * tsi721_imsg_handler - Inbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: inbound message channel number to service
+ *
+ * Services channel interrupts from inbound messaging engine.
+ */
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 mbox = ch - 4;
+ u32 imsg_int;
+
+ spin_lock(&priv->imsg_ring[mbox].lock);
+
+ imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
+
+ if (imsg_int & TSI721_IBDMAC_INT_SRTO)
+ dev_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout\n",
+ mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
+ dev_info(&priv->pdev->dev, "IB MBOX%d PCIe error\n",
+ mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
+ dev_info(&priv->pdev->dev,
+ "IB MBOX%d IB free queue low\n", mbox);
+
+ /* Clear IB channel interrupts */
+ iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* If an IB Msg is received notify the upper layer */
+ if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
+ priv->mport->inb_msg[mbox].mcback)
+ priv->mport->inb_msg[mbox].mcback(priv->mport,
+ priv->imsg_ring[mbox].dev_id, mbox, -1);
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->imsg_ring[mbox].lock);
+}
+
+/**
+ * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ */
+static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ int ch = mbox + 4;
+ int i;
+ u64 *free_ptr;
+ int rc = 0;
+
+ if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
+ (entries > TSI721_IMSGD_RING_SIZE) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize IB Messaging Ring */
+ priv->imsg_ring[mbox].dev_id = dev_id;
+ priv->imsg_ring[mbox].size = entries;
+ priv->imsg_ring[mbox].rx_slot = 0;
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+ for (i = 0; i < priv->imsg_ring[mbox].size; i++)
+ priv->imsg_ring[mbox].imq_base[i] = NULL;
+ spin_lock_init(&priv->imsg_ring[mbox].lock);
+
+ /* Allocate buffers for incoming messages */
+ priv->imsg_ring[mbox].buf_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * TSI721_MSG_BUFFER_SIZE,
+ &priv->imsg_ring[mbox].buf_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].buf_base == NULL) {
+ dev_err(&priv->pdev->dev,
+ "Failed to allocate buffers for IB MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Allocate memory for circular free list */
+ priv->imsg_ring[mbox].imfq_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * 8,
+ &priv->imsg_ring[mbox].imfq_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imfq_base == NULL) {
+ dev_err(&priv->pdev->dev,
+ "Failed to allocate free queue for IB MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ /* Allocate memory for Inbound message descriptors */
+ priv->imsg_ring[mbox].imd_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * sizeof(struct tsi721_imsg_desc),
+ &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imd_base == NULL) {
+ dev_err(&priv->pdev->dev,
+ "Failed to allocate descriptor memory for IB MBOX%d\n",
+ mbox);
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+
+ /* Fill free buffer pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ for (i = 0; i < entries; i++)
+ free_ptr[i] = cpu_to_le64(
+ (u64)(priv->imsg_ring[mbox].buf_phys) +
+ i * 0x1000);
+
+ mb();
+
+ /*
+ * For mapping of inbound SRIO Messages into appropriate queues we need
+ * to set Inbound Device ID register in the messaging engine. We do it
+ * once when first inbound mailbox is requested.
+ */
+ if (!(priv->flags & TSI721_IMSGID_SET)) {
+ iowrite32((u32)priv->mport->host_deviceid,
+ priv->regs + TSI721_IB_DEVID);
+ priv->flags |= TSI721_IMSGID_SET;
+ }
+
+ /*
+ * Configure Inbound Messaging channel (ch = mbox + 4)
+ */
+
+ /* Setup Inbound Message free queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
+ priv->regs + TSI721_IBDMAC_FQBH(ch));
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
+ TSI721_IBDMAC_FQBL_MASK),
+ priv->regs+TSI721_IBDMAC_FQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_FQSZ(ch));
+
+ /* Setup Inbound Message descriptor queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
+ priv->regs + TSI721_IBDMAC_DQBH(ch));
+ iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
+ (u32)TSI721_IBDMAC_DQBL_MASK),
+ priv->regs+TSI721_IBDMAC_DQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_DQSZ(ch));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ tsi721_imsg_msix, 0,
+ priv->msix[TSI721_VECT_IMB0_RCV + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "IBOX%d-DONE\n", mbox);
+ goto out_desc;
+ }
+
+ rc = request_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+ tsi721_imsg_msix, 0,
+ priv->msix[TSI721_VECT_IMB0_INT + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "IBOX%d-INT\n", mbox);
+ free_irq(
+ priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)mport);
+ goto out_desc;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
+
+ /* Initialize Inbound Message Engine */
+ iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
+ udelay(10);
+ priv->imsg_ring[mbox].fq_wrptr = entries - 1;
+ iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
+
+ priv->imsg_init[mbox] = 1;
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_dma:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+out_buf:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int ch = mbox + 4;
+
+ if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
+ return;
+ priv->imsg_init[mbox] = 0;
+
+ /* Disable Inbound Messaging Engine */
+
+ /* Disable Interrupts */
+ tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)mport);
+ free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+ (void *)mport);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Clear Inbound Buffer Queue */
+ for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ /* Free memory allocated for message buffers */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+ /* Free memory allocated for free pointr list */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+ /* Free memory allocated for RX descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+}
+
+/**
+ * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ */
+static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int rc = 0;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
+ dev_err(&priv->pdev->dev,
+ "Error adding inbound buffer %d, buffer exists\n",
+ rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
+
+ if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ *
+ * Returns pointer to the message on success or NULL on failure.
+ */
+static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_imsg_desc *desc;
+ u32 rx_slot;
+ void *rx_virt = NULL;
+ u64 rx_phys;
+ void *buf = NULL;
+ u64 *free_ptr;
+ int ch = mbox + 4;
+ int msg_size;
+
+ if (!priv->imsg_init[mbox])
+ return NULL;
+
+ desc = priv->imsg_ring[mbox].imd_base;
+ desc += priv->imsg_ring[mbox].desc_rdptr;
+
+ if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
+ goto out;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
+ if (++rx_slot == priv->imsg_ring[mbox].size)
+ rx_slot = 0;
+ }
+
+ rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
+ le32_to_cpu(desc->bufptr_lo);
+
+ rx_virt = priv->imsg_ring[mbox].buf_base +
+ (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
+
+ buf = priv->imsg_ring[mbox].imq_base[rx_slot];
+ msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
+ if (msg_size == 0)
+ msg_size = RIO_MAX_MSG_SIZE;
+
+ memcpy(buf, rx_virt, msg_size);
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
+ if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].desc_rdptr,
+ priv->regs + TSI721_IBDMAC_DQRP(ch));
+
+ /* Return free buffer into the pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
+
+ if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].fq_wrptr,
+ priv->regs + TSI721_IBDMAC_FQWP(ch));
+out:
+ return buf;
+}
+
+/**
+ * tsi721_messages_init - Initialization of Messaging Engine
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 messaging engine.
+ */
+static int tsi721_messages_init(struct tsi721_device *priv)
+{
+ int ch;
+
+ iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
+ iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
+ iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
+
+ /* Set SRIO Message Request/Response Timeout */
+ iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
+
+ /* Initialize Inbound Messaging Engine Registers */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
+ /* Clear interrupt bits */
+ iowrite32(TSI721_IBDMAC_INT_MASK,
+ priv->regs + TSI721_IBDMAC_INT(ch));
+ /* Clear Status */
+ iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
+
+ iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
+ priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
+ iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
+ priv->regs + TSI721_SMSG_ECC_NCOR(ch));
+ }
+
+ return 0;
+}
+
+/**
+ * tsi721_disable_ints - disables all device interrupts
+ * @priv: pointer to tsi721 private data
+ */
+static void tsi721_disable_ints(struct tsi721_device *priv)
+{
+ int ch;
+
+ /* Disable all device level interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+ /* Disable all Device Channel interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /* Disable all Inbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ /* Disable all Outbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ /* Disable all general messaging interrupts */
+ iowrite32(0, priv->regs + TSI721_SMSG_INTE);
+
+ /* Disable all BDMA Channel interrupts */
+ for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
+ iowrite32(0, priv->regs + TSI721_DMAC_INTE(ch));
+
+ /* Disable all general BDMA interrupts */
+ iowrite32(0, priv->regs + TSI721_BDMA_INTE);
+
+ /* Disable all SRIO Channel interrupts */
+ for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
+ iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
+
+ /* Disable all general SR2PC interrupts */
+ iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
+
+ /* Disable all PC2SR interrupts */
+ iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
+
+ /* Disable all I2C interrupts */
+ iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
+
+ /* Disable SRIO MAC interrupts */
+ iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+ iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+}
+
+/**
+ * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 as RapidIO master port.
+ */
+static int __devinit tsi721_setup_mport(struct tsi721_device *priv)
+{
+ struct pci_dev *pdev = priv->pdev;
+ int err = 0;
+ struct rio_ops *ops;
+
+ struct rio_mport *mport;
+
+ ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ if (!ops) {
+ dev_dbg(&pdev->dev, "Unable to allocate memory for rio_ops\n");
+ return -ENOMEM;
+ }
+
+ ops->lcread = tsi721_lcread;
+ ops->lcwrite = tsi721_lcwrite;
+ ops->cread = tsi721_cread_dma;
+ ops->cwrite = tsi721_cwrite_dma;
+ ops->dsend = tsi721_dsend;
+ ops->open_inb_mbox = tsi721_open_inb_mbox;
+ ops->close_inb_mbox = tsi721_close_inb_mbox;
+ ops->open_outb_mbox = tsi721_open_outb_mbox;
+ ops->close_outb_mbox = tsi721_close_outb_mbox;
+ ops->add_outb_message = tsi721_add_outb_message;
+ ops->add_inb_buffer = tsi721_add_inb_buffer;
+ ops->get_inb_message = tsi721_get_inb_message;
+
+ mport = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!mport) {
+ kfree(ops);
+ dev_dbg(&pdev->dev, "Unable to allocate memory for mport\n");
+ return -ENOMEM;
+ }
+
+ mport->ops = ops;
+ mport->index = 0;
+ mport->sys_size = 0; /* small system */
+ mport->phy_type = RIO_PHY_SERIAL;
+ mport->priv = (void *)priv;
+ mport->phys_efptr = 0x100;
+
+ INIT_LIST_HEAD(&mport->dbells);
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+ strcpy(mport->name, "Tsi721 mport");
+
+ /* Hook up interrupt handler */
+
+#ifdef CONFIG_PCI_MSI
+ if (!tsi721_enable_msix(priv))
+ priv->flags |= TSI721_USING_MSIX;
+ else if (!pci_enable_msi(pdev))
+ priv->flags |= TSI721_USING_MSI;
+ else
+ dev_info(&pdev->dev,
+ "MSI/MSI-X is not available. Using legacy INTx.\n");
+#endif /* CONFIG_PCI_MSI */
+
+ err = tsi721_request_irq(mport);
+
+ if (!err) {
+ tsi721_interrupts_init(priv);
+ ops->pwenable = tsi721_pw_enable;
+ } else
+ dev_err(&pdev->dev, "Unable to get assigned PCI IRQ "
+ "vector %02X err=0x%x\n", pdev->irq, err);
+
+ /* Enable SRIO link */
+ iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
+ TSI721_DEVCTL_SRBOOT_CMPL,
+ priv->regs + TSI721_DEVCTL);
+
+ rio_register_mport(mport);
+ priv->mport = mport;
+
+ if (mport->host_deviceid >= 0)
+ iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
+ RIO_PORT_GEN_DISCOVERED,
+ priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+ else
+ iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+
+ return 0;
+}
+
+static int __devinit tsi721_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct tsi721_device *priv;
+ int i;
+ int err;
+ u32 regval;
+
+ priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate memory for device\n");
+ err = -ENOMEM;
+ goto err_exit;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ goto err_clean;
+ }
+
+ priv->pdev = pdev;
+
+#ifdef DEBUG
+ for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+ dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n",
+ i, (unsigned long long)pci_resource_start(pdev, i),
+ (unsigned long)pci_resource_len(pdev, i),
+ pci_resource_flags(pdev, i));
+ }
+#endif
+ /*
+ * Verify BAR configuration
+ */
+
+ /* BAR_0 (registers) must be 512KB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
+ dev_err(&pdev->dev,
+ "Missing or misconfigured CSR BAR0, aborting.\n");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
+ dev_err(&pdev->dev,
+ "Missing or misconfigured Doorbell BAR1, aborting.\n");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /*
+ * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
+ * space.
+ * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
+ * It may be a good idea to keep them disabled using HW configuration
+ * to save PCI memory space.
+ */
+ if ((pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM) &&
+ (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64)) {
+ dev_info(&pdev->dev, "Outbound BAR2 is not used but enabled.\n");
+ }
+
+ if ((pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM) &&
+ (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64)) {
+ dev_info(&pdev->dev, "Outbound BAR4 is not used but enabled.\n");
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot obtain PCI resources, "
+ "aborting.\n");
+ goto err_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ priv->regs = pci_ioremap_bar(pdev, BAR_0);
+ if (!priv->regs) {
+ dev_err(&pdev->dev,
+ "Unable to map device registers space, aborting\n");
+ err = -ENOMEM;
+ goto err_free_res;
+ }
+
+ priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
+ if (!priv->odb_base) {
+ dev_err(&pdev->dev,
+ "Unable to map outbound doorbells space, aborting\n");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ /* Configure DMA attributes. */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dev_info(&pdev->dev, "Unable to set DMA mask\n");
+ goto err_unmap_bars;
+ }
+
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+ dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
+ } else {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err)
+ dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
+ }
+
+ /* Clear "no snoop" and "relaxed ordering" bits. */
+ pci_read_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, ®val);
+ regval &= ~(PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN);
+ pci_write_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, regval);
+
+ /*
+ * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
+ */
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
+ TSI721_MSIXTBL_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
+ TSI721_MSIXPBA_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
+ /* End of FIXUP */
+
+ tsi721_disable_ints(priv);
+
+ tsi721_init_pc2sr_mapping(priv);
+ tsi721_init_sr2pc_mapping(priv);
+
+ if (tsi721_bdma_init(priv)) {
+ dev_err(&pdev->dev, "BDMA initialization failed, aborting\n");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ err = tsi721_doorbell_init(priv);
+ if (err)
+ goto err_free_bdma;
+
+ tsi721_port_write_init(priv);
+
+ err = tsi721_messages_init(priv);
+ if (err)
+ goto err_free_consistent;
+
+ err = tsi721_setup_mport(priv);
+ if (err)
+ goto err_free_consistent;
+
+ return 0;
+
+err_free_consistent:
+ tsi721_doorbell_free(priv);
+err_free_bdma:
+ tsi721_bdma_free(priv);
+err_unmap_bars:
+ if (priv->regs)
+ iounmap(priv->regs);
+ if (priv->odb_base)
+ iounmap(priv->odb_base);
+err_free_res:
+ pci_release_regions(pdev);
+ pci_clear_master(pdev);
+err_disable_pdev:
+ pci_disable_device(pdev);
+err_clean:
+ kfree(priv);
+err_exit:
+ return err;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(tsi721_pci_tbl) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
+ { 0, } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
+
+static struct pci_driver tsi721_driver = {
+ .name = "tsi721",
+ .id_table = tsi721_pci_tbl,
+ .probe = tsi721_probe,
+};
+
+static int __init tsi721_init(void)
+{
+ return pci_register_driver(&tsi721_driver);
+}
+
+static void __exit tsi721_exit(void)
+{
+ pci_unregister_driver(&tsi721_driver);
+}
+
+device_initcall(tsi721_init);
diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h
new file mode 100644
index 0000000..58be4de
--- /dev/null
+++ b/drivers/rapidio/devices/tsi721.h
@@ -0,0 +1,766 @@
+/*
+ * Tsi721 PCIExpress-to-SRIO bridge definitions
+ *
+ * Copyright 2011, Integrated Device Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __TSI721_H
+#define __TSI721_H
+
+#define DRV_NAME "tsi721"
+
+#define DEFAULT_HOPCOUNT 0xff
+#define DEFAULT_DESTID 0xff
+
+/* PCI device ID */
+#define PCI_DEVICE_ID_TSI721 0x80ab
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_2 2
+#define BAR_4 4
+
+#define TSI721_PC2SR_BARS 2
+#define TSI721_PC2SR_WINS 8
+#define TSI721_PC2SR_ZONES 8
+#define TSI721_MAINT_WIN 0 /* Window for outbound maintenance requests */
+#define IDB_QUEUE 0 /* Inbound Doorbell Queue to use */
+#define IDB_QSIZE 512 /* Inbound Doorbell Queue size */
+
+/* Memory space sizes */
+#define TSI721_REG_SPACE_SIZE (512 * 1024) /* 512K */
+#define TSI721_DB_WIN_SIZE (16 * 1024 * 1024) /* 16MB */
+
+#define RIO_TT_CODE_8 0x00000000
+#define RIO_TT_CODE_16 0x00000001
+
+#define TSI721_DMA_MAXCH 8
+#define TSI721_DMA_MINSTSSZ 32
+#define TSI721_DMA_STSBLKSZ 8
+
+#define TSI721_SRIO_MAXCH 8
+
+#define DBELL_SID(buf) (((u8)buf[2] << 8) | (u8)buf[3])
+#define DBELL_TID(buf) (((u8)buf[4] << 8) | (u8)buf[5])
+#define DBELL_INF(buf) (((u8)buf[0] << 8) | (u8)buf[1])
+
+#define TSI721_RIO_PW_MSG_SIZE 16 /* Tsi721 saves only 16 bytes of PW msg */
+
+/* Register definitions */
+
+/*
+ * Registers in PCIe configuration space
+ */
+
+#define TSI721_PCIECFG_MSIXTBL 0x0a4
+#define TSI721_MSIXTBL_OFFSET 0x2c000
+#define TSI721_PCIECFG_MSIXPBA 0x0a8
+#define TSI721_MSIXPBA_OFFSET 0x2a000
+#define TSI721_PCIECFG_EPCTL 0x400
+
+/*
+ * Event Management Registers
+ */
+
+#define TSI721_RIO_EM_INT_STAT 0x10910
+#define TSI721_RIO_EM_INT_STAT_PW_RX 0x00010000
+
+#define TSI721_RIO_EM_INT_ENABLE 0x10914
+#define TSI721_RIO_EM_INT_ENABLE_PW_RX 0x00010000
+
+#define TSI721_RIO_EM_DEV_INT_EN 0x10930
+#define TSI721_RIO_EM_DEV_INT_EN_INT 0x00000001
+
+/*
+ * Port-Write Block Registers
+ */
+
+#define TSI721_RIO_PW_CTL 0x10a04
+#define TSI721_RIO_PW_CTL_PW_TIMER 0xf0000000
+#define TSI721_RIO_PW_CTL_PWT_DIS (0 << 28)
+#define TSI721_RIO_PW_CTL_PWT_103 (1 << 28)
+#define TSI721_RIO_PW_CTL_PWT_205 (1 << 29)
+#define TSI721_RIO_PW_CTL_PWT_410 (1 << 30)
+#define TSI721_RIO_PW_CTL_PWT_820 (1 << 31)
+#define TSI721_RIO_PW_CTL_PWC_MODE 0x01000000
+#define TSI721_RIO_PW_CTL_PWC_CONT 0x00000000
+#define TSI721_RIO_PW_CTL_PWC_REL 0x01000000
+
+#define TSI721_RIO_PW_RX_STAT 0x10a10
+#define TSI721_RIO_PW_RX_STAT_WR_SIZE 0x0000f000
+#define TSI_RIO_PW_RX_STAT_WDPTR 0x00000100
+#define TSI721_RIO_PW_RX_STAT_PW_SHORT 0x00000008
+#define TSI721_RIO_PW_RX_STAT_PW_TRUNC 0x00000004
+#define TSI721_RIO_PW_RX_STAT_PW_DISC 0x00000002
+#define TSI721_RIO_PW_RX_STAT_PW_VAL 0x00000001
+
+#define TSI721_RIO_PW_RX_CAPT(x) (0x10a20 + (x)*4)
+
+/*
+ * Inbound Doorbells
+ */
+
+#define TSI721_IDB_ENTRY_SIZE 64
+
+#define TSI721_IDQ_CTL(x) (0x20000 + (x) * 1000)
+#define TSI721_IDQ_SUSPEND 0x00000002
+#define TSI721_IDQ_INIT 0x00000001
+
+#define TSI721_IDQ_STS(x) (0x20004 + (x) * 1000)
+#define TSI721_IDQ_RUN 0x00200000
+
+#define TSI721_IDQ_MASK(x) (0x20008 + (x) * 1000)
+#define TSI721_IDQ_MASK_MASK 0xffff0000
+#define TSI721_IDQ_MASK_PATT 0x0000ffff
+
+#define TSI721_IDQ_RP(x) (0x2000c + (x) * 1000)
+#define TSI721_IDQ_RP_PTR 0x0007ffff
+
+#define TSI721_IDQ_WP(x) (0x20010 + (x) * 1000)
+#define TSI721_IDQ_WP_PTR 0x0007ffff
+
+#define TSI721_IDQ_BASEL(x) (0x20014 + (x) * 1000)
+#define TSI721_IDQ_BASEL_ADDR 0xffffffc0
+#define TSI721_IDQ_BASEU(x) (0x20018 + (x) * 1000)
+#define TSI721_IDQ_SIZE(x) (0x2001c + (x) * 1000)
+#define TSI721_IDQ_SIZE_VAL(size) (__fls(size) - 4)
+#define TSI721_IDQ_SIZE_MIN 512
+#define TSI721_IDQ_SIZE_MAX (512 * 1024)
+
+#define TSI721_SR_CHINT(x) (0x20040 + (x) * 1000)
+#define TSI721_SR_CHINTE(x) (0x20044 + (x) * 1000)
+#define TSI721_SR_CHINTSET(x) (0x20048 + (x) * 1000)
+#define TSI721_SR_CHINT_ODBOK 0x00000020
+#define TSI721_SR_CHINT_IDBQRCV 0x00000010
+#define TSI721_SR_CHINT_SUSP 0x00000008
+#define TSI721_SR_CHINT_ODBTO 0x00000004
+#define TSI721_SR_CHINT_ODBRTRY 0x00000002
+#define TSI721_SR_CHINT_ODBERR 0x00000001
+#define TSI721_SR_CHINT_ALL 0x0000003f
+
+#define TSI721_IBWIN_NUM 8
+
+#define TSI721_IBWINLB(x) (0x29000 + (x) * 20)
+#define TSI721_IBWINLB_BA 0xfffff000
+#define TSI721_IBWINLB_WEN 0x00000001
+
+#define TSI721_SR2PC_GEN_INTE 0x29800
+#define TSI721_SR2PC_PWE 0x29804
+#define TSI721_SR2PC_GEN_INT 0x29808
+
+#define TSI721_DEV_INTE 0x29840
+#define TSI721_DEV_INT 0x29844
+#define TSI721_DEV_INTSET 0x29848
+#define TSI721_DEV_INT_SMSG_CH 0x00000800
+#define TSI721_DEV_INT_SMSG_NCH 0x00000400
+#define TSI721_DEV_INT_SR2PC_CH 0x00000200
+#define TSI721_DEV_INT_SRIO 0x00000020
+
+#define TSI721_DEV_CHAN_INTE 0x2984c
+#define TSI721_DEV_CHAN_INT 0x29850
+
+#define TSI721_INT_SR2PC_CHAN_M 0xff000000
+#define TSI721_INT_SR2PC_CHAN(x) (1 << (24 + (x)))
+#define TSI721_INT_IMSG_CHAN_M 0x00ff0000
+#define TSI721_INT_IMSG_CHAN(x) (1 << (16 + (x)))
+#define TSI721_INT_OMSG_CHAN_M 0x0000ff00
+#define TSI721_INT_OMSG_CHAN(x) (1 << (8 + (x)))
+
+/*
+ * PC2SR block registers
+ */
+#define TSI721_OBWIN_NUM TSI721_PC2SR_WINS
+
+#define TSI721_OBWINLB(x) (0x40000 + (x) * 20)
+#define TSI721_OBWINLB_BA 0xffff8000
+#define TSI721_OBWINLB_WEN 0x00000001
+
+#define TSI721_OBWINUB(x) (0x40004 + (x) * 20)
+
+#define TSI721_OBWINSZ(x) (0x40008 + (x) * 20)
+#define TSI721_OBWINSZ_SIZE 0x00001f00
+#define TSI721_OBWIN_SIZE(size) (__fls(size) - 15)
+
+#define TSI721_ZONE_SEL 0x41300
+#define TSI721_ZONE_SEL_RD_WRB 0x00020000
+#define TSI721_ZONE_SEL_GO 0x00010000
+#define TSI721_ZONE_SEL_WIN 0x00000038
+#define TSI721_ZONE_SEL_ZONE 0x00000007
+
+#define TSI721_LUT_DATA0 0x41304
+#define TSI721_LUT_DATA0_ADD 0xfffff000
+#define TSI721_LUT_DATA0_RDTYPE 0x00000f00
+#define TSI721_LUT_DATA0_NREAD 0x00000100
+#define TSI721_LUT_DATA0_MNTRD 0x00000200
+#define TSI721_LUT_DATA0_RDCRF 0x00000020
+#define TSI721_LUT_DATA0_WRCRF 0x00000010
+#define TSI721_LUT_DATA0_WRTYPE 0x0000000f
+#define TSI721_LUT_DATA0_NWR 0x00000001
+#define TSI721_LUT_DATA0_MNTWR 0x00000002
+#define TSI721_LUT_DATA0_NWR_R 0x00000004
+
+#define TSI721_LUT_DATA1 0x41308
+
+#define TSI721_LUT_DATA2 0x4130c
+#define TSI721_LUT_DATA2_HC 0xff000000
+#define TSI721_LUT_DATA2_ADD65 0x000c0000
+#define TSI721_LUT_DATA2_TT 0x00030000
+#define TSI721_LUT_DATA2_DSTID 0x0000ffff
+
+#define TSI721_PC2SR_INTE 0x41310
+
+#define TSI721_DEVCTL 0x48004
+#define TSI721_DEVCTL_SRBOOT_CMPL 0x00000004
+
+#define TSI721_I2C_INT_ENABLE 0x49120
+
+/*
+ * Block DMA Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_DMAC_DWRCNT(x) (0x51000 + (x) * 0x1000)
+#define TSI721_DMAC_DRDCNT(x) (0x51004 + (x) * 0x1000)
+
+#define TSI721_DMAC_CTL(x) (0x51008 + (x) * 0x1000)
+#define TSI721_DMAC_CTL_SUSP 0x00000002
+#define TSI721_DMAC_CTL_INIT 0x00000001
+
+#define TSI721_DMAC_INT(x) (0x5100c + (x) * 0x1000)
+#define TSI721_DMAC_INT_STFULL 0x00000010
+#define TSI721_DMAC_INT_DONE 0x00000008
+#define TSI721_DMAC_INT_SUSP 0x00000004
+#define TSI721_DMAC_INT_ERR 0x00000002
+#define TSI721_DMAC_INT_IOFDONE 0x00000001
+#define TSI721_DMAC_INT_ALL 0x0000001f
+
+#define TSI721_DMAC_INTSET(x) (0x51010 + (x) * 0x1000)
+
+#define TSI721_DMAC_STS(x) (0x51014 + (x) * 0x1000)
+#define TSI721_DMAC_STS_ABORT 0x00400000
+#define TSI721_DMAC_STS_RUN 0x00200000
+#define TSI721_DMAC_STS_CS 0x001f0000
+
+#define TSI721_DMAC_INTE(x) (0x51018 + (x) * 0x1000)
+
+#define TSI721_DMAC_DPTRL(x) (0x51024 + (x) * 0x1000)
+#define TSI721_DMAC_DPTRL_MASK 0xffffffe0
+
+#define TSI721_DMAC_DPTRH(x) (0x51028 + (x) * 0x1000)
+
+#define TSI721_DMAC_DSBL(x) (0x5102c + (x) * 0x1000)
+#define TSI721_DMAC_DSBL_MASK 0xffffffc0
+
+#define TSI721_DMAC_DSBH(x) (0x51030 + (x) * 0x1000)
+
+#define TSI721_DMAC_DSSZ(x) (0x51034 + (x) * 0x1000)
+#define TSI721_DMAC_DSSZ_SIZE_M 0x0000000f
+#define TSI721_DMAC_DSSZ_SIZE(size) (__fls(size) - 4)
+
+
+#define TSI721_DMAC_DSRP(x) (0x51038 + (x) * 0x1000)
+#define TSI721_DMAC_DSRP_MASK 0x0007ffff
+
+#define TSI721_DMAC_DSWP(x) (0x5103c + (x) * 0x1000)
+#define TSI721_DMAC_DSWP_MASK 0x0007ffff
+
+#define TSI721_BDMA_INTE 0x5f000
+
+/*
+ * Messaging definitions
+ */
+#define TSI721_MSG_BUFFER_SIZE RIO_MAX_MSG_SIZE
+#define TSI721_MSG_MAX_SIZE RIO_MAX_MSG_SIZE
+#define TSI721_IMSG_MAXCH 8
+#define TSI721_IMSG_CHNUM TSI721_IMSG_MAXCH
+#define TSI721_IMSGD_MIN_RING_SIZE 32
+#define TSI721_IMSGD_RING_SIZE 512
+
+#define TSI721_OMSG_CHNUM 4 /* One channel per MBOX */
+#define TSI721_OMSGD_MIN_RING_SIZE 32
+#define TSI721_OMSGD_RING_SIZE 512
+
+/*
+ * Outbound Messaging Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_OBDMAC_DWRCNT(x) (0x61000 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_DRDCNT(x) (0x61004 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_CTL(x) (0x61008 + (x) * 0x1000)
+#define TSI721_OBDMAC_CTL_MASK 0x00000007
+#define TSI721_OBDMAC_CTL_RETRY_THR 0x00000004
+#define TSI721_OBDMAC_CTL_SUSPEND 0x00000002
+#define TSI721_OBDMAC_CTL_INIT 0x00000001
+
+#define TSI721_OBDMAC_INT(x) (0x6100c + (x) * 0x1000)
+#define TSI721_OBDMAC_INTSET(x) (0x61010 + (x) * 0x1000)
+#define TSI721_OBDMAC_INTE(x) (0x61018 + (x) * 0x1000)
+#define TSI721_OBDMAC_INT_MASK 0x0000001F
+#define TSI721_OBDMAC_INT_ST_FULL 0x00000010
+#define TSI721_OBDMAC_INT_DONE 0x00000008
+#define TSI721_OBDMAC_INT_SUSPENDED 0x00000004
+#define TSI721_OBDMAC_INT_ERROR 0x00000002
+#define TSI721_OBDMAC_INT_IOF_DONE 0x00000001
+#define TSI721_OBDMAC_INT_ALL TSI721_OBDMAC_INT_MASK
+
+#define TSI721_OBDMAC_STS(x) (0x61014 + (x) * 0x1000)
+#define TSI721_OBDMAC_STS_MASK 0x007f0000
+#define TSI721_OBDMAC_STS_ABORT 0x00400000
+#define TSI721_OBDMAC_STS_RUN 0x00200000
+#define TSI721_OBDMAC_STS_CS 0x001f0000
+
+#define TSI721_OBDMAC_PWE(x) (0x6101c + (x) * 0x1000)
+#define TSI721_OBDMAC_PWE_MASK 0x00000002
+#define TSI721_OBDMAC_PWE_ERROR_EN 0x00000002
+
+#define TSI721_OBDMAC_DPTRL(x) (0x61020 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRL_MASK 0xfffffff0
+
+#define TSI721_OBDMAC_DPTRH(x) (0x61024 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRH_MASK 0xffffffff
+
+#define TSI721_OBDMAC_DSBL(x) (0x61040 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBL_MASK 0xffffffc0
+
+#define TSI721_OBDMAC_DSBH(x) (0x61044 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBH_MASK 0xffffffff
+
+#define TSI721_OBDMAC_DSSZ(x) (0x61048 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSSZ_MASK 0x0000000f
+
+#define TSI721_OBDMAC_DSRP(x) (0x6104c + (x) * 0x1000)
+#define TSI721_OBDMAC_DSRP_MASK 0x0007ffff
+
+#define TSI721_OBDMAC_DSWP(x) (0x61050 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSWP_MASK 0x0007ffff
+
+#define TSI721_RQRPTO 0x60010
+#define TSI721_RQRPTO_MASK 0x00ffffff
+#define TSI721_RQRPTO_VAL 400 /* Response TO value */
+
+/*
+ * Inbound Messaging Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_IB_DEVID_GLOBAL 0xffff
+#define TSI721_IBDMAC_FQBL(x) (0x61200 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBL_MASK 0xffffffc0
+
+#define TSI721_IBDMAC_FQBH(x) (0x61204 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBH_MASK 0xffffffff
+
+#define TSI721_IBDMAC_FQSZ_ENTRY_INX TSI721_IMSGD_RING_SIZE
+#define TSI721_IBDMAC_FQSZ(x) (0x61208 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQSZ_MASK 0x0000000f
+
+#define TSI721_IBDMAC_FQRP(x) (0x6120c + (x) * 0x1000)
+#define TSI721_IBDMAC_FQRP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_FQWP(x) (0x61210 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQWP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_FQTH(x) (0x61214 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQTH_MASK 0x0007ffff
+
+#define TSI721_IB_DEVID 0x60020
+#define TSI721_IB_DEVID_MASK 0x0000ffff
+
+#define TSI721_IBDMAC_CTL(x) (0x61240 + (x) * 0x1000)
+#define TSI721_IBDMAC_CTL_MASK 0x00000003
+#define TSI721_IBDMAC_CTL_SUSPEND 0x00000002
+#define TSI721_IBDMAC_CTL_INIT 0x00000001
+
+#define TSI721_IBDMAC_STS(x) (0x61244 + (x) * 0x1000)
+#define TSI721_IBDMAC_STS_MASK 0x007f0000
+#define TSI721_IBSMAC_STS_ABORT 0x00400000
+#define TSI721_IBSMAC_STS_RUN 0x00200000
+#define TSI721_IBSMAC_STS_CS 0x001f0000
+
+#define TSI721_IBDMAC_INT(x) (0x61248 + (x) * 0x1000)
+#define TSI721_IBDMAC_INTSET(x) (0x6124c + (x) * 0x1000)
+#define TSI721_IBDMAC_INTE(x) (0x61250 + (x) * 0x1000)
+#define TSI721_IBDMAC_INT_MASK 0x0000100f
+#define TSI721_IBDMAC_INT_SRTO 0x00001000
+#define TSI721_IBDMAC_INT_SUSPENDED 0x00000008
+#define TSI721_IBDMAC_INT_PC_ERROR 0x00000004
+#define TSI721_IBDMAC_INT_FQ_LOW 0x00000002
+#define TSI721_IBDMAC_INT_DQ_RCV 0x00000001
+#define TSI721_IBDMAC_INT_ALL TSI721_IBDMAC_INT_MASK
+
+#define TSI721_IBDMAC_PWE(x) (0x61254 + (x) * 0x1000)
+#define TSI721_IBDMAC_PWE_MASK 0x00001700
+#define TSI721_IBDMAC_PWE_SRTO 0x00001000
+#define TSI721_IBDMAC_PWE_ILL_FMT 0x00000400
+#define TSI721_IBDMAC_PWE_ILL_DEC 0x00000200
+#define TSI721_IBDMAC_PWE_IMP_SP 0x00000100
+
+#define TSI721_IBDMAC_DQBL(x) (0x61300 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBL_MASK 0xffffffc0
+#define TSI721_IBDMAC_DQBL_ADDR 0xffffffc0
+
+#define TSI721_IBDMAC_DQBH(x) (0x61304 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBH_MASK 0xffffffff
+
+#define TSI721_IBDMAC_DQRP(x) (0x61308 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQRP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_DQWR(x) (0x6130c + (x) * 0x1000)
+#define TSI721_IBDMAC_DQWR_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_DQSZ(x) (0x61314 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQSZ_MASK 0x0000000f
+
+/*
+ * Messaging Engine Interrupts
+ */
+
+#define TSI721_SMSG_PWE 0x6a004
+
+#define TSI721_SMSG_INTE 0x6a000
+#define TSI721_SMSG_INT 0x6a008
+#define TSI721_SMSG_INTSET 0x6a010
+#define TSI721_SMSG_INT_MASK 0x0086ffff
+#define TSI721_SMSG_INT_UNS_RSP 0x00800000
+#define TSI721_SMSG_INT_ECC_NCOR 0x00040000
+#define TSI721_SMSG_INT_ECC_COR 0x00020000
+#define TSI721_SMSG_INT_ECC_NCOR_CH 0x0000ff00
+#define TSI721_SMSG_INT_ECC_COR_CH 0x000000ff
+
+#define TSI721_SMSG_ECC_LOG 0x6a014
+#define TSI721_SMSG_ECC_LOG_MASK 0x00070007
+#define TSI721_SMSG_ECC_LOG_ECC_NCOR_M 0x00070000
+#define TSI721_SMSG_ECC_LOG_ECC_COR_M 0x00000007
+
+#define TSI721_RETRY_GEN_CNT 0x6a100
+#define TSI721_RETRY_GEN_CNT_MASK 0xffffffff
+
+#define TSI721_RETRY_RX_CNT 0x6a104
+#define TSI721_RETRY_RX_CNT_MASK 0xffffffff
+
+#define TSI721_SMSG_ECC_COR_LOG(x) (0x6a300 + (x) * 4)
+#define TSI721_SMSG_ECC_COR_LOG_MASK 0x000000ff
+
+#define TSI721_SMSG_ECC_NCOR(x) (0x6a340 + (x) * 4)
+#define TSI721_SMSG_ECC_NCOR_MASK 0x000000ff
+
+/*
+ * Block DMA Descriptors
+ */
+
+struct tsi721_dma_desc {
+ __le32 type_id;
+
+#define TSI721_DMAD_DEVID 0x0000ffff
+#define TSI721_DMAD_CRF 0x00010000
+#define TSI721_DMAD_PRIO 0x00060000
+#define TSI721_DMAD_RTYPE 0x00780000
+#define TSI721_DMAD_IOF 0x08000000
+#define TSI721_DMAD_DTYPE 0xe0000000
+
+ __le32 bcount;
+
+#define TSI721_DMAD_BCOUNT1 0x03ffffff /* if DTYPE == 1 */
+#define TSI721_DMAD_BCOUNT2 0x0000000f /* if DTYPE == 2 */
+#define TSI721_DMAD_TT 0x0c000000
+#define TSI721_DMAD_RADDR0 0xc0000000
+
+ union {
+ __le32 raddr_lo; /* if DTYPE == (1 || 2) */
+ __le32 next_lo; /* if DTYPE == 3 */
+ };
+
+#define TSI721_DMAD_CFGOFF 0x00ffffff
+#define TSI721_DMAD_HOPCNT 0xff000000
+
+ union {
+ __le32 raddr_hi; /* if DTYPE == (1 || 2) */
+ __le32 next_hi; /* if DTYPE == 3 */
+ };
+
+ union {
+ struct { /* if DTYPE == 1 */
+ __le32 bufptr_lo;
+ __le32 bufptr_hi;
+ __le32 s_dist;
+ __le32 s_size;
+ } t1;
+ __le32 data[4]; /* if DTYPE == 2 */
+ u32 reserved[4]; /* if DTYPE == 3 */
+ };
+} __aligned(32);
+
+/*
+ * Inbound Messaging Descriptor
+ */
+struct tsi721_imsg_desc {
+ __le32 type_id;
+
+#define TSI721_IMD_DEVID 0x0000ffff
+#define TSI721_IMD_CRF 0x00010000
+#define TSI721_IMD_PRIO 0x00060000
+#define TSI721_IMD_TT 0x00180000
+#define TSI721_IMD_DTYPE 0xe0000000
+
+ __le32 msg_info;
+
+#define TSI721_IMD_BCOUNT 0x00000ff8
+#define TSI721_IMD_SSIZE 0x0000f000
+#define TSI721_IMD_LETER 0x00030000
+#define TSI721_IMD_XMBOX 0x003c0000
+#define TSI721_IMD_MBOX 0x00c00000
+#define TSI721_IMD_CS 0x78000000
+#define TSI721_IMD_HO 0x80000000
+
+ __le32 bufptr_lo;
+ __le32 bufptr_hi;
+ u32 reserved[12];
+
+} __aligned(64);
+
+/*
+ * Outbound Messaging Descriptor
+ */
+struct tsi721_omsg_desc {
+ __le32 type_id;
+
+#define TSI721_OMD_DEVID 0x0000ffff
+#define TSI721_OMD_CRF 0x00010000
+#define TSI721_OMD_PRIO 0x00060000
+#define TSI721_OMD_IOF 0x08000000
+#define TSI721_OMD_DTYPE 0xe0000000
+#define TSI721_OMD_RSRVD 0x17f80000
+
+ __le32 msg_info;
+
+#define TSI721_OMD_BCOUNT 0x00000ff8
+#define TSI721_OMD_SSIZE 0x0000f000
+#define TSI721_OMD_LETER 0x00030000
+#define TSI721_OMD_XMBOX 0x003c0000
+#define TSI721_OMD_MBOX 0x00c00000
+#define TSI721_OMD_TT 0x0c000000
+
+ union {
+ __le32 bufptr_lo; /* if DTYPE == 4 */
+ __le32 next_lo; /* if DTYPE == 5 */
+ };
+
+ union {
+ __le32 bufptr_hi; /* if DTYPE == 4 */
+ __le32 next_hi; /* if DTYPE == 5 */
+ };
+
+} __aligned(16);
+
+struct tsi721_dma_sts {
+ __le64 desc_sts[8];
+} __aligned(64);
+
+struct tsi721_desc_sts_fifo {
+ union {
+ __le64 da64;
+ struct {
+ __le32 lo;
+ __le32 hi;
+ } da32;
+ } stat[8];
+} __aligned(64);
+
+/* Descriptor types for BDMA and Messaging blocks */
+enum dma_dtype {
+ DTYPE1 = 1, /* Data Transfer DMA Descriptor */
+ DTYPE2 = 2, /* Immediate Data Transfer DMA Descriptor */
+ DTYPE3 = 3, /* Block Pointer DMA Descriptor */
+ DTYPE4 = 4, /* Outbound Msg DMA Descriptor */
+ DTYPE5 = 5, /* OB Messaging Block Pointer Descriptor */
+ DTYPE6 = 6 /* Inbound Messaging Descriptor */
+};
+
+enum dma_rtype {
+ NREAD = 0,
+ LAST_NWRITE_R = 1,
+ ALL_NWRITE = 2,
+ ALL_NWRITE_R = 3,
+ MAINT_RD = 4,
+ MAINT_WR = 5
+};
+
+/*
+ * mport Driver Definitions
+ */
+#define TSI721_DMA_CHNUM TSI721_DMA_MAXCH
+
+#define TSI721_DMACH_MAINT 0 /* DMA channel for maint requests */
+#define TSI721_DMACH_MAINT_NBD 32 /* Number of BDs for maint requests */
+
+#define MSG_DMA_ENTRY_INX_TO_SIZE(x) ((0x10 << (x)) & 0xFFFF0)
+
+enum tsi721_smsg_int_flag {
+ SMSG_INT_NONE = 0x00000000,
+ SMSG_INT_ECC_COR_CH = 0x000000ff,
+ SMSG_INT_ECC_NCOR_CH = 0x0000ff00,
+ SMSG_INT_ECC_COR = 0x00020000,
+ SMSG_INT_ECC_NCOR = 0x00040000,
+ SMSG_INT_UNS_RSP = 0x00800000,
+ SMSG_INT_ALL = 0x0006ffff
+};
+
+/* Structures */
+
+struct tsi721_bdma_chan {
+ int bd_num; /* number of buffer descriptors */
+ void *bd_base; /* start of DMA descriptors */
+ dma_addr_t bd_phys;
+ void *sts_base; /* start of DMA BD status FIFO */
+ dma_addr_t sts_phys;
+ int sts_size;
+};
+
+struct tsi721_imsg_ring {
+ u32 size;
+ /* VA/PA of data buffers for incoming messages */
+ void *buf_base;
+ dma_addr_t buf_phys;
+ /* VA/PA of circular free buffer list */
+ void *imfq_base;
+ dma_addr_t imfq_phys;
+ /* VA/PA of Inbound message descriptors */
+ void *imd_base;
+ dma_addr_t imd_phys;
+ /* Inbound Queue buffer pointers */
+ void *imq_base[TSI721_IMSGD_RING_SIZE];
+
+ u32 rx_slot;
+ void *dev_id;
+ u32 fq_wrptr;
+ u32 desc_rdptr;
+ spinlock_t lock;
+};
+
+struct tsi721_omsg_ring {
+ u32 size;
+ /* VA/PA of OB Msg descriptors */
+ void *omd_base;
+ dma_addr_t omd_phys;
+ /* VA/PA of OB Msg data buffers */
+ void *omq_base[TSI721_OMSGD_RING_SIZE];
+ dma_addr_t omq_phys[TSI721_OMSGD_RING_SIZE];
+ /* VA/PA of OB Msg descriptor status FIFO */
+ void *sts_base;
+ dma_addr_t sts_phys;
+ u32 sts_size; /* # of allocated status entries */
+ u32 sts_rdptr;
+
+ u32 tx_slot;
+ void *dev_id;
+ u32 wr_count;
+ spinlock_t lock;
+};
+
+enum tsi721_flags {
+ TSI721_USING_MSI = (1 << 0),
+ TSI721_USING_MSIX = (1 << 1),
+ TSI721_IMSGID_SET = (1 << 2),
+};
+
+#ifdef CONFIG_PCI_MSI
+/*
+ * MSI-X Table Entries (0 ... 69)
+ */
+#define TSI721_MSIX_DMACH_DONE(x) (0 + (x))
+#define TSI721_MSIX_DMACH_INT(x) (8 + (x))
+#define TSI721_MSIX_BDMA_INT 16
+#define TSI721_MSIX_OMSG_DONE(x) (17 + (x))
+#define TSI721_MSIX_OMSG_INT(x) (25 + (x))
+#define TSI721_MSIX_IMSG_DQ_RCV(x) (33 + (x))
+#define TSI721_MSIX_IMSG_INT(x) (41 + (x))
+#define TSI721_MSIX_MSG_INT 49
+#define TSI721_MSIX_SR2PC_IDBQ_RCV(x) (50 + (x))
+#define TSI721_MSIX_SR2PC_CH_INT(x) (58 + (x))
+#define TSI721_MSIX_SR2PC_INT 66
+#define TSI721_MSIX_PC2SR_INT 67
+#define TSI721_MSIX_SRIO_MAC_INT 68
+#define TSI721_MSIX_I2C_INT 69
+
+/* MSI-X vector and init table entry indexes */
+enum tsi721_msix_vect {
+ TSI721_VECT_IDB,
+ TSI721_VECT_PWRX, /* PW_RX is part of SRIO MAC Interrupt reporting */
+ TSI721_VECT_OMB0_DONE,
+ TSI721_VECT_OMB1_DONE,
+ TSI721_VECT_OMB2_DONE,
+ TSI721_VECT_OMB3_DONE,
+ TSI721_VECT_OMB0_INT,
+ TSI721_VECT_OMB1_INT,
+ TSI721_VECT_OMB2_INT,
+ TSI721_VECT_OMB3_INT,
+ TSI721_VECT_IMB0_RCV,
+ TSI721_VECT_IMB1_RCV,
+ TSI721_VECT_IMB2_RCV,
+ TSI721_VECT_IMB3_RCV,
+ TSI721_VECT_IMB0_INT,
+ TSI721_VECT_IMB1_INT,
+ TSI721_VECT_IMB2_INT,
+ TSI721_VECT_IMB3_INT,
+ TSI721_VECT_MAX
+};
+
+#define IRQ_DEVICE_NAME_MAX 64
+
+struct msix_irq {
+ u16 vector;
+ char irq_name[IRQ_DEVICE_NAME_MAX];
+};
+#endif /* CONFIG_PCI_MSI */
+
+struct tsi721_device {
+ struct pci_dev *pdev;
+ struct rio_mport *mport;
+ u32 flags;
+ void __iomem *regs;
+#ifdef CONFIG_PCI_MSI
+ struct msix_irq msix[TSI721_VECT_MAX];
+#endif
+ /* Doorbells */
+ void __iomem *odb_base;
+ void *idb_base;
+ dma_addr_t idb_dma;
+ struct work_struct idb_work;
+ u32 db_discard_count;
+
+ /* Inbound Port-Write */
+ struct work_struct pw_work;
+ struct kfifo pw_fifo;
+ spinlock_t pw_fifo_lock;
+ u32 pw_discard_count;
+
+ /* BDMA Engine */
+ struct tsi721_bdma_chan bdma[TSI721_DMA_CHNUM];
+
+ /* Inbound Messaging */
+ int imsg_init[TSI721_IMSG_CHNUM];
+ struct tsi721_imsg_ring imsg_ring[TSI721_IMSG_CHNUM];
+
+ /* Outbound Messaging */
+ int omsg_init[TSI721_OMSG_CHNUM];
+ struct tsi721_omsg_ring omsg_ring[TSI721_OMSG_CHNUM];
+};
+
+#endif
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index ebe77dd..2bebd79 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -516,7 +516,7 @@
return rdev;
cleanup:
- if (rio_is_switch(rdev))
+ if (rswitch)
kfree(rswitch->route_table);
kfree(rdev);
@@ -923,7 +923,7 @@
* rio_enum_complete- Tests if enumeration of a network is complete
* @port: Master port to send transaction
*
- * Tests the Component Tag CSR for non-zero value (enumeration
+ * Tests the PGCCSR discovered bit for non-zero value (enumeration
* complete flag). Return %1 if enumeration is complete or %0 if
* enumeration is incomplete.
*/
@@ -933,7 +933,7 @@
rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,
®val);
- return (regval & RIO_PORT_GEN_MASTER) ? 1 : 0;
+ return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;
}
/**
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index d63fddb..e821b21 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -412,7 +412,7 @@
if (info->desc.id == res->start)
break;
}
- if ((i < 0) || (i > PM8607_ID_RG_MAX)) {
+ if (i == ARRAY_SIZE(pm8607_regulator_info)) {
dev_err(&pdev->dev, "Failed to find regulator %llu\n",
(unsigned long long)res->start);
return -EINVAL;
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c7fd2c0..9713b1b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -64,6 +64,16 @@
If unsure, say no.
+config REGULATOR_GPIO
+ tristate "GPIO regulator support"
+ depends on GENERIC_GPIO
+ help
+ This driver provides support for regulators that can be
+ controlled via gpios.
+ It is capable of supporting current and voltage regulators
+ and the platform has to provide a mapping of GPIO-states
+ to target volts/amps.
+
config REGULATOR_BQ24022
tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
help
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 040d5aa..93a6318 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
+obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index cd41045..5abeb3a 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d8e6a42..67fa2a3 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1425,7 +1425,7 @@
ret = _regulator_enable(rdev);
mutex_unlock(&rdev->mutex);
- if (ret != 0)
+ if (ret != 0 && rdev->supply)
regulator_disable(rdev->supply);
return ret;
@@ -1552,6 +1552,68 @@
}
EXPORT_SYMBOL_GPL(regulator_force_disable);
+static void regulator_disable_work(struct work_struct *work)
+{
+ struct regulator_dev *rdev = container_of(work, struct regulator_dev,
+ disable_work.work);
+ int count, i, ret;
+
+ mutex_lock(&rdev->mutex);
+
+ BUG_ON(!rdev->deferred_disables);
+
+ count = rdev->deferred_disables;
+ rdev->deferred_disables = 0;
+
+ for (i = 0; i < count; i++) {
+ ret = _regulator_disable(rdev);
+ if (ret != 0)
+ rdev_err(rdev, "Deferred disable failed: %d\n", ret);
+ }
+
+ mutex_unlock(&rdev->mutex);
+
+ if (rdev->supply) {
+ for (i = 0; i < count; i++) {
+ ret = regulator_disable(rdev->supply);
+ if (ret != 0) {
+ rdev_err(rdev,
+ "Supply disable failed: %d\n", ret);
+ }
+ }
+ }
+}
+
+/**
+ * regulator_disable_deferred - disable regulator output with delay
+ * @regulator: regulator source
+ * @ms: miliseconds until the regulator is disabled
+ *
+ * Execute regulator_disable() on the regulator after a delay. This
+ * is intended for use with devices that require some time to quiesce.
+ *
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled, the regulator device supports disabling and
+ * machine constraints permit this operation.
+ */
+int regulator_disable_deferred(struct regulator *regulator, int ms)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+ rdev->deferred_disables++;
+ mutex_unlock(&rdev->mutex);
+
+ ret = schedule_delayed_work(&rdev->disable_work,
+ msecs_to_jiffies(ms));
+ if (ret < 0)
+ return ret;
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_disable_deferred);
+
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
/* If we don't know then assume that the regulator is always on */
@@ -2622,6 +2684,7 @@
INIT_LIST_HEAD(&rdev->consumer_list);
INIT_LIST_HEAD(&rdev->list);
BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+ INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);
/* preform any regulator specific init */
if (init_data->regulator_init) {
@@ -2729,6 +2792,7 @@
#ifdef CONFIG_DEBUG_FS
debugfs_remove_recursive(rdev->debugfs);
#endif
+ flush_work_sync(&rdev->disable_work.work);
WARN_ON(rdev->open_count);
unset_regulator_supplies(rdev);
list_del(&rdev->list);
@@ -2907,6 +2971,43 @@
}
EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
+#ifdef CONFIG_DEBUG_FS
+static ssize_t supply_map_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ ssize_t len, ret = 0;
+ struct regulator_map *map;
+
+ if (!buf)
+ return -ENOMEM;
+
+ list_for_each_entry(map, ®ulator_map_list, list) {
+ len = snprintf(buf + ret, PAGE_SIZE - ret,
+ "%s -> %s.%s\n",
+ rdev_get_name(map->regulator), map->dev_name,
+ map->supply);
+ if (len >= 0)
+ ret += len;
+ if (ret > PAGE_SIZE) {
+ ret = PAGE_SIZE;
+ break;
+ }
+ }
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static const struct file_operations supply_map_fops = {
+ .read = supply_map_read_file,
+ .llseek = default_llseek,
+};
+#endif
+
static int __init regulator_init(void)
{
int ret;
@@ -2919,6 +3020,10 @@
pr_warn("regulator: Failed to create debugfs directory\n");
debugfs_root = NULL;
}
+
+ if (IS_ERR(debugfs_create_file("supply_map", 0444, debugfs_root,
+ NULL, &supply_map_fops)))
+ pr_warn("regulator: Failed to create supplies debugfs\n");
#endif
regulator_dummy_init();
diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c
index 2bb8f45..2d014a1 100644
--- a/drivers/regulator/db8500-prcmu.c
+++ b/drivers/regulator/db8500-prcmu.c
@@ -13,7 +13,7 @@
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/db8500-prcmu.h>
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
new file mode 100644
index 0000000..f0acf52
--- /dev/null
+++ b/drivers/regulator/gpio-regulator.c
@@ -0,0 +1,358 @@
+/*
+ * gpio-regulator.c
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+struct gpio_regulator_data {
+ struct regulator_desc desc;
+ struct regulator_dev *dev;
+
+ int enable_gpio;
+ bool enable_high;
+ bool is_enabled;
+ unsigned startup_delay;
+
+ struct gpio *gpios;
+ int nr_gpios;
+
+ struct gpio_regulator_state *states;
+ int nr_states;
+
+ int state;
+};
+
+static int gpio_regulator_is_enabled(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ return data->is_enabled;
+}
+
+static int gpio_regulator_enable(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ if (gpio_is_valid(data->enable_gpio)) {
+ gpio_set_value_cansleep(data->enable_gpio, data->enable_high);
+ data->is_enabled = true;
+ }
+
+ return 0;
+}
+
+static int gpio_regulator_disable(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ if (gpio_is_valid(data->enable_gpio)) {
+ gpio_set_value_cansleep(data->enable_gpio, !data->enable_high);
+ data->is_enabled = false;
+ }
+
+ return 0;
+}
+
+static int gpio_regulator_enable_time(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ return data->startup_delay;
+}
+
+static int gpio_regulator_get_value(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+ int ptr;
+
+ for (ptr = 0; ptr < data->nr_states; ptr++)
+ if (data->states[ptr].gpios == data->state)
+ return data->states[ptr].value;
+
+ return -EINVAL;
+}
+
+static int gpio_regulator_set_value(struct regulator_dev *dev,
+ int min, int max)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+ int ptr, target, state;
+
+ target = -1;
+ for (ptr = 0; ptr < data->nr_states; ptr++)
+ if (data->states[ptr].value >= min &&
+ data->states[ptr].value <= max)
+ target = data->states[ptr].gpios;
+
+ if (target < 0)
+ return -EINVAL;
+
+ for (ptr = 0; ptr < data->nr_gpios; ptr++) {
+ state = (target & (1 << ptr)) >> ptr;
+ gpio_set_value(data->gpios[ptr].gpio, state);
+ }
+ data->state = target;
+
+ return 0;
+}
+
+static int gpio_regulator_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV,
+ unsigned *selector)
+{
+ return gpio_regulator_set_value(dev, min_uV, max_uV);
+}
+
+static int gpio_regulator_list_voltage(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ if (selector >= data->nr_states)
+ return -EINVAL;
+
+ return data->states[selector].value;
+}
+
+static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
+ int min_uA, int max_uA)
+{
+ return gpio_regulator_set_value(dev, min_uA, max_uA);
+}
+
+static struct regulator_ops gpio_regulator_voltage_ops = {
+ .is_enabled = gpio_regulator_is_enabled,
+ .enable = gpio_regulator_enable,
+ .disable = gpio_regulator_disable,
+ .enable_time = gpio_regulator_enable_time,
+ .get_voltage = gpio_regulator_get_value,
+ .set_voltage = gpio_regulator_set_voltage,
+ .list_voltage = gpio_regulator_list_voltage,
+};
+
+static struct regulator_ops gpio_regulator_current_ops = {
+ .is_enabled = gpio_regulator_is_enabled,
+ .enable = gpio_regulator_enable,
+ .disable = gpio_regulator_disable,
+ .enable_time = gpio_regulator_enable_time,
+ .get_current_limit = gpio_regulator_get_value,
+ .set_current_limit = gpio_regulator_set_current_limit,
+};
+
+static int __devinit gpio_regulator_probe(struct platform_device *pdev)
+{
+ struct gpio_regulator_config *config = pdev->dev.platform_data;
+ struct gpio_regulator_data *drvdata;
+ int ptr, ret, state;
+
+ drvdata = kzalloc(sizeof(struct gpio_regulator_data), GFP_KERNEL);
+ if (drvdata == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate device data\n");
+ return -ENOMEM;
+ }
+
+ drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+ if (drvdata->desc.name == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate supply name\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ drvdata->gpios = kmemdup(config->gpios,
+ config->nr_gpios * sizeof(struct gpio),
+ GFP_KERNEL);
+ if (drvdata->gpios == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate gpio data\n");
+ ret = -ENOMEM;
+ goto err_name;
+ }
+
+ drvdata->states = kmemdup(config->states,
+ config->nr_states *
+ sizeof(struct gpio_regulator_state),
+ GFP_KERNEL);
+ if (drvdata->states == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate state data\n");
+ ret = -ENOMEM;
+ goto err_memgpio;
+ }
+ drvdata->nr_states = config->nr_states;
+
+ drvdata->desc.owner = THIS_MODULE;
+
+ /* handle regulator type*/
+ switch (config->type) {
+ case REGULATOR_VOLTAGE:
+ drvdata->desc.type = REGULATOR_VOLTAGE;
+ drvdata->desc.ops = &gpio_regulator_voltage_ops;
+ drvdata->desc.n_voltages = config->nr_states;
+ break;
+ case REGULATOR_CURRENT:
+ drvdata->desc.type = REGULATOR_CURRENT;
+ drvdata->desc.ops = &gpio_regulator_current_ops;
+ break;
+ default:
+ dev_err(&pdev->dev, "No regulator type set\n");
+ ret = -EINVAL;
+ goto err_memgpio;
+ break;
+ }
+
+ drvdata->enable_gpio = config->enable_gpio;
+ drvdata->startup_delay = config->startup_delay;
+
+ if (gpio_is_valid(config->enable_gpio)) {
+ drvdata->enable_high = config->enable_high;
+
+ ret = gpio_request(config->enable_gpio, config->supply_name);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator enable GPIO %d: %d\n",
+ config->enable_gpio, ret);
+ goto err_memstate;
+ }
+
+ /* set output direction without changing state
+ * to prevent glitch
+ */
+ if (config->enabled_at_boot) {
+ drvdata->is_enabled = true;
+ ret = gpio_direction_output(config->enable_gpio,
+ config->enable_high);
+ } else {
+ drvdata->is_enabled = false;
+ ret = gpio_direction_output(config->enable_gpio,
+ !config->enable_high);
+ }
+
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not configure regulator enable GPIO %d direction: %d\n",
+ config->enable_gpio, ret);
+ goto err_enablegpio;
+ }
+ } else {
+ /* Regulator without GPIO control is considered
+ * always enabled
+ */
+ drvdata->is_enabled = true;
+ }
+
+ drvdata->nr_gpios = config->nr_gpios;
+ ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator setting GPIOs: %d\n", ret);
+ goto err_enablegpio;
+ }
+
+ /* build initial state from gpio init data. */
+ state = 0;
+ for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
+ if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
+ state |= (1 << ptr);
+ }
+ drvdata->state = state;
+
+ drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
+ config->init_data, drvdata);
+ if (IS_ERR(drvdata->dev)) {
+ ret = PTR_ERR(drvdata->dev);
+ dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+ goto err_stategpio;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+
+err_stategpio:
+ gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
+err_enablegpio:
+ if (gpio_is_valid(config->enable_gpio))
+ gpio_free(config->enable_gpio);
+err_memstate:
+ kfree(drvdata->states);
+err_memgpio:
+ kfree(drvdata->gpios);
+err_name:
+ kfree(drvdata->desc.name);
+err:
+ kfree(drvdata);
+ return ret;
+}
+
+static int __devexit gpio_regulator_remove(struct platform_device *pdev)
+{
+ struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
+
+ regulator_unregister(drvdata->dev);
+
+ gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
+
+ kfree(drvdata->states);
+ kfree(drvdata->gpios);
+
+ if (gpio_is_valid(drvdata->enable_gpio))
+ gpio_free(drvdata->enable_gpio);
+
+ kfree(drvdata->desc.name);
+ kfree(drvdata);
+
+ return 0;
+}
+
+static struct platform_driver gpio_regulator_driver = {
+ .probe = gpio_regulator_probe,
+ .remove = __devexit_p(gpio_regulator_remove),
+ .driver = {
+ .name = "gpio-regulator",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_regulator_init(void)
+{
+ return platform_driver_register(&gpio_regulator_driver);
+}
+subsys_initcall(gpio_regulator_init);
+
+static void __exit gpio_regulator_exit(void)
+{
+ platform_driver_unregister(&gpio_regulator_driver);
+}
+module_exit(gpio_regulator_exit);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("gpio voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-regulator");
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 30eb9e5..1062cf9 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -221,7 +221,7 @@
ret = (ret & MAX8649_RAMP_MASK) >> 5;
rate = (32 * 1000) >> ret; /* uV/uS */
- return (voltage / rate);
+ return DIV_ROUND_UP(voltage, rate);
}
static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index 486ed81..3883d85c 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -26,7 +26,6 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/max8952.h>
-#include <linux/mutex.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -47,7 +46,6 @@
struct max8952_data {
struct i2c_client *client;
struct device *dev;
- struct mutex mutex;
struct max8952_platform_data *pdata;
struct regulator_dev *rdev;
@@ -208,7 +206,6 @@
max8952->client = client;
max8952->dev = &client->dev;
max8952->pdata = pdata;
- mutex_init(&max8952->mutex);
max8952->rdev = regulator_register(®ulator, max8952->dev,
&pdata->reg_data, max8952);
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 730f43a..cb2841f 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -336,9 +336,9 @@
{
struct mc13xxx_regulator_priv *priv;
struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
- struct mc13783_regulator_platform_data *pdata =
+ struct mc13xxx_regulator_platform_data *pdata =
dev_get_platdata(&pdev->dev);
- struct mc13783_regulator_init_data *init_data;
+ struct mc13xxx_regulator_init_data *init_data;
int i, ret;
dev_dbg(&pdev->dev, "%s id %d\n", __func__, pdev->id);
@@ -381,7 +381,7 @@
static int __devexit mc13783_regulator_remove(struct platform_device *pdev)
{
struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev);
- struct mc13783_regulator_platform_data *pdata =
+ struct mc13xxx_regulator_platform_data *pdata =
dev_get_platdata(&pdev->dev);
int i;
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 701a590..9fb4c7b 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -63,6 +63,13 @@
#define TPS65023_REG_CTRL_LDO2_EN BIT(2)
#define TPS65023_REG_CTRL_LDO1_EN BIT(1)
+/* REG_CTRL2 bitfields */
+#define TPS65023_REG_CTRL2_GO BIT(7)
+#define TPS65023_REG_CTRL2_CORE_ADJ BIT(6)
+#define TPS65023_REG_CTRL2_DCDC2 BIT(2)
+#define TPS65023_REG_CTRL2_DCDC1 BIT(1)
+#define TPS65023_REG_CTRL2_DCDC3 BIT(0)
+
/* LDO_CTRL bitfields */
#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0xF0 >> ((ldo_id)*4))
@@ -85,7 +92,7 @@
#define TPS65023_MAX_REG_ID TPS65023_LDO_2
/* Supported voltage values for regulators */
-static const u16 VDCDC1_VSEL_table[] = {
+static const u16 VCORE_VSEL_table[] = {
800, 825, 850, 875,
900, 925, 950, 975,
1000, 1025, 1050, 1075,
@@ -96,20 +103,29 @@
1500, 1525, 1550, 1600,
};
-static const u16 LDO1_VSEL_table[] = {
+/* Supported voltage values for LDO regulators for tps65020 */
+static const u16 TPS65020_LDO1_VSEL_table[] = {
+ 1000, 1050, 1100, 1300,
+ 1800, 2500, 3000, 3300,
+};
+
+static const u16 TPS65020_LDO2_VSEL_table[] = {
+ 1000, 1050, 1100, 1300,
+ 1800, 2500, 3000, 3300,
+};
+
+/* Supported voltage values for LDO regulators
+ * for tps65021 and tps65023 */
+static const u16 TPS65023_LDO1_VSEL_table[] = {
1000, 1100, 1300, 1800,
2200, 2600, 2800, 3150,
};
-static const u16 LDO2_VSEL_table[] = {
+static const u16 TPS65023_LDO2_VSEL_table[] = {
1050, 1200, 1300, 1800,
2500, 2800, 3000, 3300,
};
-static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDC1_VSEL_table),
- 0, 0, ARRAY_SIZE(LDO1_VSEL_table),
- ARRAY_SIZE(LDO2_VSEL_table)};
-
/* Regulator specific details */
struct tps_info {
const char *name;
@@ -127,6 +143,13 @@
struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
const struct tps_info *info[TPS65023_NUM_REGULATOR];
struct regmap *regmap;
+ u8 core_regulator;
+};
+
+/* Struct passed as driver data */
+struct tps_driver_data {
+ const struct tps_info *info;
+ u8 core_regulator;
};
static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
@@ -253,7 +276,7 @@
if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
return -EINVAL;
- if (dcdc == TPS65023_DCDC_1) {
+ if (dcdc == tps->core_regulator) {
data = tps_65023_reg_read(tps, TPS65023_REG_DEF_CORE);
if (data < 0)
return data;
@@ -270,10 +293,10 @@
struct tps_pmic *tps = rdev_get_drvdata(dev);
int dcdc = rdev_get_id(dev);
int vsel;
+ int ret;
- if (dcdc != TPS65023_DCDC_1)
+ if (dcdc != tps->core_regulator)
return -EINVAL;
-
if (min_uV < tps->info[dcdc]->min_uV
|| min_uV > tps->info[dcdc]->max_uV)
return -EINVAL;
@@ -292,11 +315,21 @@
*selector = vsel;
- /* write to the register in case we found a match */
if (vsel == tps->info[dcdc]->table_len)
- return -EINVAL;
- else
- return tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+ goto failed;
+
+ ret = tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+
+ /* Tell the chip that we have changed the value in DEFCORE
+ * and its time to update the core voltage
+ */
+ tps_65023_set_bits(tps, TPS65023_REG_CON_CTRL2,
+ TPS65023_REG_CTRL2_GO);
+
+ return ret;
+
+failed:
+ return -EINVAL;
}
static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
@@ -362,7 +395,7 @@
if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
return -EINVAL;
- if (dcdc == TPS65023_DCDC_1) {
+ if (dcdc == tps->core_regulator) {
if (selector >= tps->info[dcdc]->table_len)
return -EINVAL;
else
@@ -414,7 +447,8 @@
static int __devinit tps_65023_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct tps_info *info = (void *)id->driver_data;
+ const struct tps_driver_data *drv_data = (void *)id->driver_data;
+ const struct tps_info *info = drv_data->info;
struct regulator_init_data *init_data;
struct regulator_dev *rdev;
struct tps_pmic *tps;
@@ -446,6 +480,7 @@
/* common for all regulators */
tps->client = client;
+ tps->core_regulator = drv_data->core_regulator;
for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
/* Store regulator specific information */
@@ -453,7 +488,7 @@
tps->desc[i].name = info->name;
tps->desc[i].id = i;
- tps->desc[i].n_voltages = num_voltages[i];
+ tps->desc[i].n_voltages = info->table_len;
tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
&tps65023_ldo_ops : &tps65023_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
@@ -475,6 +510,14 @@
i2c_set_clientdata(client, tps);
+ /* Enable setting output voltage by I2C */
+ tps_65023_clear_bits(tps, TPS65023_REG_CON_CTRL2,
+ TPS65023_REG_CTRL2_CORE_ADJ);
+
+ /* Enable setting output voltage by I2C */
+ tps_65023_clear_bits(tps, TPS65023_REG_CON_CTRL2,
+ TPS65023_REG_CTRL2_CORE_ADJ);
+
return 0;
fail:
@@ -507,13 +550,86 @@
return 0;
}
+static const struct tps_info tps65020_regs[] = {
+ {
+ .name = "VDCDC1",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC2",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC3",
+ .min_uV = 800000,
+ .max_uV = 1600000,
+ .table_len = ARRAY_SIZE(VCORE_VSEL_table),
+ .table = VCORE_VSEL_table,
+ },
+
+ {
+ .name = "LDO1",
+ .min_uV = 1000000,
+ .max_uV = 3150000,
+ .table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
+ .table = TPS65020_LDO1_VSEL_table,
+ },
+ {
+ .name = "LDO2",
+ .min_uV = 1050000,
+ .max_uV = 3300000,
+ .table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
+ .table = TPS65020_LDO2_VSEL_table,
+ },
+};
+
+static const struct tps_info tps65021_regs[] = {
+ {
+ .name = "VDCDC1",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC2",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC3",
+ .min_uV = 800000,
+ .max_uV = 1600000,
+ .table_len = ARRAY_SIZE(VCORE_VSEL_table),
+ .table = VCORE_VSEL_table,
+ },
+ {
+ .name = "LDO1",
+ .min_uV = 1000000,
+ .max_uV = 3150000,
+ .table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+ .table = TPS65023_LDO1_VSEL_table,
+ },
+ {
+ .name = "LDO2",
+ .min_uV = 1050000,
+ .max_uV = 3300000,
+ .table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+ .table = TPS65023_LDO2_VSEL_table,
+ },
+};
+
static const struct tps_info tps65023_regs[] = {
{
.name = "VDCDC1",
.min_uV = 800000,
.max_uV = 1600000,
- .table_len = ARRAY_SIZE(VDCDC1_VSEL_table),
- .table = VDCDC1_VSEL_table,
+ .table_len = ARRAY_SIZE(VCORE_VSEL_table),
+ .table = VCORE_VSEL_table,
},
{
.name = "VDCDC2",
@@ -531,23 +647,40 @@
.name = "LDO1",
.min_uV = 1000000,
.max_uV = 3150000,
- .table_len = ARRAY_SIZE(LDO1_VSEL_table),
- .table = LDO1_VSEL_table,
+ .table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+ .table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
.min_uV = 1050000,
.max_uV = 3300000,
- .table_len = ARRAY_SIZE(LDO2_VSEL_table),
- .table = LDO2_VSEL_table,
+ .table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+ .table = TPS65023_LDO2_VSEL_table,
},
};
+static struct tps_driver_data tps65020_drv_data = {
+ .info = tps65020_regs,
+ .core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65021_drv_data = {
+ .info = tps65021_regs,
+ .core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65023_drv_data = {
+ .info = tps65023_regs,
+ .core_regulator = TPS65023_DCDC_1,
+};
+
static const struct i2c_device_id tps_65023_id[] = {
{.name = "tps65023",
- .driver_data = (unsigned long) tps65023_regs,},
+ .driver_data = (unsigned long) &tps65023_drv_data},
{.name = "tps65021",
- .driver_data = (unsigned long) tps65023_regs,},
+ .driver_data = (unsigned long) &tps65021_drv_data,},
+ {.name = "tps65020",
+ .driver_data = (unsigned long) &tps65020_drv_data},
{ },
};
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index bfffabc..bdef703 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -90,12 +90,6 @@
3000, 3100, 3200, 3300,
};
-static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDCx_VSEL_table),
- ARRAY_SIZE(VDCDCx_VSEL_table),
- ARRAY_SIZE(VDCDCx_VSEL_table),
- ARRAY_SIZE(LDO1_VSEL_table),
- ARRAY_SIZE(LDO2_VSEL_table)};
-
struct tps_info {
const char *name;
unsigned min_uV;
@@ -598,7 +592,7 @@
tps->desc[i].name = info->name;
tps->desc[i].id = i;
- tps->desc[i].n_voltages = num_voltages[i];
+ tps->desc[i].n_voltages = info->table_len;
tps->desc[i].ops = (i > TPS6507X_DCDC_3 ?
&tps6507x_pmic_ldo_ops : &tps6507x_pmic_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index bb04a75..dbcf09d 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -332,6 +332,36 @@
1 << ri->enable_bit[1]);
}
+static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev)
+{
+ struct device *parent = pdev->dev.parent;
+ struct regulator_init_data *p = pdev->dev.platform_data;
+ struct tps6586x_settings *setting = p->driver_data;
+ uint8_t reg;
+
+ if (setting == NULL)
+ return 0;
+
+ if (!(setting->slew_rate & TPS6586X_SLEW_RATE_SET))
+ return 0;
+
+ /* only SM0 and SM1 can have the slew rate settings */
+ switch (pdev->id) {
+ case TPS6586X_ID_SM_0:
+ reg = TPS6586X_SM0SL;
+ break;
+ case TPS6586X_ID_SM_1:
+ reg = TPS6586X_SM1SL;
+ break;
+ default:
+ dev_warn(&pdev->dev, "Only SM0/SM1 can set slew rate\n");
+ return -EINVAL;
+ }
+
+ return tps6586x_write(parent, reg,
+ setting->slew_rate & TPS6586X_SLEW_RATE_MASK);
+}
+
static inline struct tps6586x_regulator *find_regulator_info(int id)
{
struct tps6586x_regulator *ri;
@@ -374,7 +404,7 @@
platform_set_drvdata(pdev, rdev);
- return 0;
+ return tps6586x_regulator_set_slew_rate(pdev);
}
static int __devexit tps6586x_regulator_remove(struct platform_device *pdev)
diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c
index 3a9313e..39d4a174 100644
--- a/drivers/regulator/tps65912-regulator.c
+++ b/drivers/regulator/tps65912-regulator.c
@@ -43,8 +43,6 @@
#define TPS65912_REG_LDO9 12
#define TPS65912_REG_LDO10 13
-#define TPS65912_MAX_REG_ID TPS65912_REG_LDO_10
-
/* Number of step-down converters available */
#define TPS65912_NUM_DCDC 4
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 1a6a690..b87bf5c 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -140,6 +140,14 @@
return (selector * 100000) + 900000;
case WM8958:
return (selector * 100000) + 1000000;
+ case WM1811:
+ switch (selector) {
+ case 0:
+ return -EINVAL;
+ default:
+ return (selector * 100000) + 950000;
+ }
+ break;
default:
return -EINVAL;
}
@@ -170,6 +178,11 @@
case WM8958:
selector = (min_uV - 1000000) / 100000;
break;
+ case WM1811:
+ selector = (min_uV - 950000) / 100000;
+ if (selector == 0)
+ selector = 1;
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 5a538fc..53eb4e5 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -8,7 +8,7 @@
menuconfig RTC_CLASS
bool "Real Time Clock"
default n
- depends on !S390
+ depends on !S390 && !UML
select RTC_LIB
help
Generic RTC class support. If you say yes here, you will
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 01a7df53..e8326f2 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -21,16 +21,13 @@
#include "rtc-core.h"
-static DEFINE_IDR(rtc_idr);
-static DEFINE_MUTEX(idr_lock);
+static DEFINE_IDA(rtc_ida);
struct class *rtc_class;
static void rtc_device_release(struct device *dev)
{
struct rtc_device *rtc = to_rtc_device(dev);
- mutex_lock(&idr_lock);
- idr_remove(&rtc_idr, rtc->id);
- mutex_unlock(&idr_lock);
+ ida_simple_remove(&rtc_ida, rtc->id);
kfree(rtc);
}
@@ -146,25 +143,16 @@
struct rtc_wkalrm alrm;
int id, err;
- if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
- err = -ENOMEM;
+ id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ err = id;
goto exit;
}
-
- mutex_lock(&idr_lock);
- err = idr_get_new(&rtc_idr, NULL, &id);
- mutex_unlock(&idr_lock);
-
- if (err < 0)
- goto exit;
-
- id = id & MAX_ID_MASK;
-
rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL);
if (rtc == NULL) {
err = -ENOMEM;
- goto exit_idr;
+ goto exit_ida;
}
rtc->id = id;
@@ -222,10 +210,8 @@
exit_kfree:
kfree(rtc);
-exit_idr:
- mutex_lock(&idr_lock);
- idr_remove(&rtc_idr, id);
- mutex_unlock(&idr_lock);
+exit_ida:
+ ida_simple_remove(&rtc_ida, id);
exit:
dev_err(dev, "rtc core: unable to register %s, err = %d\n",
@@ -276,7 +262,7 @@
{
rtc_dev_exit();
class_destroy(rtc_class);
- idr_destroy(&rtc_idr);
+ ida_destroy(&rtc_ida);
}
subsys_initcall(rtc_init);
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index b2005b4..62b0763 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -34,6 +34,7 @@
ds_1388,
ds_3231,
m41t00,
+ mcp7941x,
rx_8025,
// rs5c372 too? different address...
};
@@ -43,6 +44,7 @@
#define DS1307_REG_SECS 0x00 /* 00-59 */
# define DS1307_BIT_CH 0x80
# define DS1340_BIT_nEOSC 0x80
+# define MCP7941X_BIT_ST 0x80
#define DS1307_REG_MIN 0x01 /* 00-59 */
#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
@@ -50,6 +52,7 @@
# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
#define DS1307_REG_WDAY 0x03 /* 01-07 */
+# define MCP7941X_BIT_VBATEN 0x08
#define DS1307_REG_MDAY 0x04 /* 01-31 */
#define DS1307_REG_MONTH 0x05 /* 01-12 */
# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
@@ -137,6 +140,8 @@
},
[m41t00] = {
},
+[mcp7941x] = {
+},
[rx_8025] = {
}, };
@@ -149,6 +154,7 @@
{ "ds1340", ds_1340 },
{ "ds3231", ds_3231 },
{ "m41t00", m41t00 },
+ { "mcp7941x", mcp7941x },
{ "pt7c4338", ds_1307 },
{ "rx8025", rx_8025 },
{ }
@@ -365,6 +371,10 @@
buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
| DS1340_BIT_CENTURY;
break;
+ case mcp7941x:
+ buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST;
+ buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN;
+ break;
default:
break;
}
@@ -809,6 +819,23 @@
dev_warn(&client->dev, "SET TIME!\n");
}
break;
+ case mcp7941x:
+ /* make sure that the backup battery is enabled */
+ if (!(ds1307->regs[DS1307_REG_WDAY] & MCP7941X_BIT_VBATEN)) {
+ i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
+ ds1307->regs[DS1307_REG_WDAY]
+ | MCP7941X_BIT_VBATEN);
+ }
+
+ /* clock halted? turn it on, so clock can tick. */
+ if (!(tmp & MCP7941X_BIT_ST)) {
+ i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
+ MCP7941X_BIT_ST);
+ dev_warn(&client->dev, "SET TIME!\n");
+ goto read_rtc;
+ }
+
+ break;
case rx_8025:
case ds_1337:
case ds_1339:
diff --git a/drivers/rtc/rtc-mc13xxx.c b/drivers/rtc/rtc-mc13xxx.c
index a1a278b..9d0c3b4 100644
--- a/drivers/rtc/rtc-mc13xxx.c
+++ b/drivers/rtc/rtc-mc13xxx.c
@@ -309,7 +309,7 @@
return IRQ_HANDLED;
}
-static int __devinit mc13xxx_rtc_probe(struct platform_device *pdev)
+static int __init mc13xxx_rtc_probe(struct platform_device *pdev)
{
int ret;
struct mc13xxx_rtc *priv;
@@ -378,7 +378,7 @@
return ret;
}
-static int __devexit mc13xxx_rtc_remove(struct platform_device *pdev)
+static int __exit mc13xxx_rtc_remove(struct platform_device *pdev)
{
struct mc13xxx_rtc *priv = platform_get_drvdata(pdev);
@@ -410,7 +410,7 @@
static struct platform_driver mc13xxx_rtc_driver = {
.id_table = mc13xxx_rtc_idtable,
- .remove = __devexit_p(mc13xxx_rtc_remove),
+ .remove = __exit_p(mc13xxx_rtc_remove),
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index a1d3ddb..65894f0 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -11,7 +11,6 @@
#define KMSG_COMPONENT "dasd"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/kernel_stat.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -1594,7 +1593,6 @@
unsigned long long now;
int expires;
- kstat_cpu(smp_processor_id()).irqs[IOINT_DAS]++;
if (IS_ERR(irb)) {
switch (PTR_ERR(irb)) {
case -EIO:
@@ -2061,13 +2059,14 @@
/*
* Wakeup helper for the 'sleep_on' functions.
*/
-static void dasd_wakeup_cb(struct dasd_ccw_req *cqr, void *data)
+void dasd_wakeup_cb(struct dasd_ccw_req *cqr, void *data)
{
spin_lock_irq(get_ccwdev_lock(cqr->startdev->cdev));
cqr->callback_data = DASD_SLEEPON_END_TAG;
spin_unlock_irq(get_ccwdev_lock(cqr->startdev->cdev));
wake_up(&generic_waitq);
}
+EXPORT_SYMBOL_GPL(dasd_wakeup_cb);
static inline int _wait_for_wakeup(struct dasd_ccw_req *cqr)
{
@@ -2167,7 +2166,9 @@
} else
wait_event(generic_waitq, !(device->stopped));
- cqr->callback = dasd_wakeup_cb;
+ if (!cqr->callback)
+ cqr->callback = dasd_wakeup_cb;
+
cqr->callback_data = DASD_SLEEPON_START_TAG;
dasd_add_request_tail(cqr);
if (interruptible) {
@@ -2263,7 +2264,11 @@
cqr->callback = dasd_wakeup_cb;
cqr->callback_data = DASD_SLEEPON_START_TAG;
cqr->status = DASD_CQR_QUEUED;
- list_add(&cqr->devlist, &device->ccw_queue);
+ /*
+ * add new request as second
+ * first the terminated cqr needs to be finished
+ */
+ list_add(&cqr->devlist, device->ccw_queue.next);
/* let the bh start the request to keep them in order */
dasd_schedule_device_bh(device);
@@ -3284,6 +3289,9 @@
if (IS_ERR(device))
return PTR_ERR(device);
+ /* mark device as suspended */
+ set_bit(DASD_FLAG_SUSPENDED, &device->flags);
+
if (device->discipline->freeze)
rc = device->discipline->freeze(device);
@@ -3358,6 +3366,7 @@
if (device->block)
dasd_schedule_block_bh(device->block);
+ clear_bit(DASD_FLAG_SUSPENDED, &device->flags);
dasd_put_device(device);
return 0;
}
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 6e835c9..6ab2968 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -844,6 +844,30 @@
set_bit(DASD_CQR_VERIFY_PATH, &cqr->flags);
}
+/*
+ * Wakeup helper for read_conf
+ * if the cqr is not done and needs some error recovery
+ * the buffer has to be re-initialized with the EBCDIC "V1.0"
+ * to show support for virtual device SNEQ
+ */
+static void read_conf_cb(struct dasd_ccw_req *cqr, void *data)
+{
+ struct ccw1 *ccw;
+ __u8 *rcd_buffer;
+
+ if (cqr->status != DASD_CQR_DONE) {
+ ccw = cqr->cpaddr;
+ rcd_buffer = (__u8 *)((addr_t) ccw->cda);
+ memset(rcd_buffer, 0, sizeof(*rcd_buffer));
+
+ rcd_buffer[0] = 0xE5;
+ rcd_buffer[1] = 0xF1;
+ rcd_buffer[2] = 0x4B;
+ rcd_buffer[3] = 0xF0;
+ }
+ dasd_wakeup_cb(cqr, data);
+}
+
static int dasd_eckd_read_conf_immediately(struct dasd_device *device,
struct dasd_ccw_req *cqr,
__u8 *rcd_buffer,
@@ -863,6 +887,7 @@
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
set_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags);
cqr->retries = 5;
+ cqr->callback = read_conf_cb;
rc = dasd_sleep_on_immediatly(cqr);
return rc;
}
@@ -900,6 +925,7 @@
goto out_error;
}
dasd_eckd_fill_rcd_cqr(device, cqr, rcd_buf, lpm);
+ cqr->callback = read_conf_cb;
ret = dasd_sleep_on(cqr);
/*
* on success we update the user input parms
@@ -1075,6 +1101,12 @@
data = container_of(work, struct path_verification_work_data, worker);
device = data->device;
+ /* delay path verification until device was resumed */
+ if (test_bit(DASD_FLAG_SUSPENDED, &device->flags)) {
+ schedule_work(work);
+ return;
+ }
+
opm = 0;
npm = 0;
ppm = 0;
@@ -2021,9 +2053,13 @@
/* first of all check for state change pending interrupt */
mask = DEV_STAT_ATTENTION | DEV_STAT_DEV_END | DEV_STAT_UNIT_EXCEP;
if ((scsw_dstat(&irb->scsw) & mask) == mask) {
- /* for alias only and not in offline processing*/
+ /*
+ * for alias only, not in offline processing
+ * and only if not suspended
+ */
if (!device->block && private->lcu &&
- !test_bit(DASD_FLAG_OFFLINE, &device->flags)) {
+ !test_bit(DASD_FLAG_OFFLINE, &device->flags) &&
+ !test_bit(DASD_FLAG_SUSPENDED, &device->flags)) {
/*
* the state change could be caused by an alias
* reassignment remove device from alias handling
@@ -2350,7 +2386,7 @@
new_track = 1;
end_idaw = 0;
len_to_track_end = 0;
- idaw_dst = 0;
+ idaw_dst = NULL;
idaw_len = 0;
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
@@ -2412,7 +2448,7 @@
if (end_idaw) {
idaws = idal_create_words(idaws, idaw_dst,
idaw_len);
- idaw_dst = 0;
+ idaw_dst = NULL;
idaw_len = 0;
end_idaw = 0;
}
@@ -3998,6 +4034,7 @@
.thaw = dasd_generic_restore_device,
.restore = dasd_generic_restore_device,
.uc_handler = dasd_generic_uc_handler,
+ .int_class = IOINT_DAS,
};
/*
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 4b71b11..a62a753 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -79,6 +79,7 @@
.freeze = dasd_generic_pm_freeze,
.thaw = dasd_generic_restore_device,
.restore = dasd_generic_restore_device,
+ .int_class = IOINT_DAS,
};
static void
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 1dd12bd..afe8c33 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -516,6 +516,7 @@
*/
#define DASD_FLAG_IS_RESERVED 7 /* The device is reserved */
#define DASD_FLAG_LOCK_STOLEN 8 /* The device lock was stolen */
+#define DASD_FLAG_SUSPENDED 9 /* The device was suspended */
void dasd_put_device_wake(struct dasd_device *);
@@ -643,6 +644,7 @@
dasd_smalloc_request(int , int, int, struct dasd_device *);
void dasd_kfree_request(struct dasd_ccw_req *, struct dasd_device *);
void dasd_sfree_request(struct dasd_ccw_req *, struct dasd_device *);
+void dasd_wakeup_cb(struct dasd_ccw_req *, void *);
static inline int
dasd_kmalloc_set_cda(struct ccw1 *ccw, void *cda, struct dasd_device *device)
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 694464c..934458a 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -9,7 +9,6 @@
* Dan Morrison, IBM Corporation <dmorriso@cse.buffalo.edu>
*/
-#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kdev_t.h>
@@ -362,7 +361,6 @@
int cstat, dstat;
int count;
- kstat_cpu(smp_processor_id()).irqs[IOINT_C15]++;
raw = dev_get_drvdata(&cdev->dev);
req = (struct raw3215_req *) intparm;
cstat = irb->scsw.cmd.cstat;
@@ -776,6 +774,7 @@
.freeze = &raw3215_pm_stop,
.thaw = &raw3215_pm_start,
.restore = &raw3215_pm_start,
+ .int_class = IOINT_C15,
};
#ifdef CONFIG_TN3215_CONSOLE
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 810ac38..e5cb924 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -7,7 +7,6 @@
* Copyright IBM Corp. 2003, 2009
*/
-#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/init.h>
@@ -330,7 +329,6 @@
struct raw3270_request *rq;
int rc;
- kstat_cpu(smp_processor_id()).irqs[IOINT_C70]++;
rp = dev_get_drvdata(&cdev->dev);
if (!rp)
return;
@@ -1398,6 +1396,7 @@
.freeze = &raw3270_pm_stop,
.thaw = &raw3270_pm_start,
.restore = &raw3270_pm_start,
+ .int_class = IOINT_C70,
};
static int
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 837e0102..0b54a91 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -61,8 +61,8 @@
rc = sclp_service_call(cmd, sccb);
if (rc)
goto out;
- __load_psw_mask(PSW_BASE_BITS | PSW_MASK_EXT |
- PSW_MASK_WAIT | PSW_DEFAULT_KEY);
+ __load_psw_mask(PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_EA |
+ PSW_MASK_BA | PSW_MASK_EXT | PSW_MASK_WAIT);
local_irq_disable();
out:
/* Contents of the sccb might have changed. */
diff --git a/drivers/s390/char/sclp_quiesce.c b/drivers/s390/char/sclp_quiesce.c
index a90a02c..87fc0ac 100644
--- a/drivers/s390/char/sclp_quiesce.c
+++ b/drivers/s390/char/sclp_quiesce.c
@@ -30,7 +30,8 @@
psw_t quiesce_psw;
smp_send_stop();
- quiesce_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT;
+ quiesce_psw.mask =
+ PSW_MASK_BASE | PSW_MASK_EA | PSW_MASK_BA | PSW_MASK_WAIT;
quiesce_psw.addr = 0xfff;
__load_psw(quiesce_psw);
}
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 9eff2df..934ef33 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1330,6 +1330,7 @@
.set_online = tape_34xx_online,
.set_offline = tape_generic_offline,
.freeze = tape_generic_pm_suspend,
+ .int_class = IOINT_TAP,
};
static int
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index a7d5707..49c6aab 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -1762,6 +1762,7 @@
.set_offline = tape_generic_offline,
.set_online = tape_3590_online,
.freeze = tape_generic_pm_suspend,
+ .int_class = IOINT_TAP,
};
/*
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 7978a0a..b3a3e8e 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -14,7 +14,6 @@
#define KMSG_COMPONENT "tape"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/init.h> // for kernel parameters
#include <linux/kmod.h> // for requesting modules
@@ -1115,7 +1114,6 @@
struct tape_request *request;
int rc;
- kstat_cpu(smp_processor_id()).irqs[IOINT_TAP]++;
device = dev_get_drvdata(&cdev->dev);
if (device == NULL) {
return;
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index f6b00c3..d291a54 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -11,7 +11,6 @@
#define KMSG_COMPONENT "vmur"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/kernel_stat.h>
#include <linux/cdev.h>
#include <linux/slab.h>
@@ -74,6 +73,7 @@
.set_online = ur_set_online,
.set_offline = ur_set_offline,
.freeze = ur_pm_suspend,
+ .int_class = IOINT_VMR,
};
static DEFINE_MUTEX(vmur_mutex);
@@ -305,7 +305,6 @@
{
struct urdev *urd;
- kstat_cpu(smp_processor_id()).irqs[IOINT_VMR]++;
TRACE("ur_int_handler: intparm=0x%lx cstat=%02x dstat=%02x res=%u\n",
intparm, irb->scsw.cmd.cstat, irb->scsw.cmd.dstat,
irb->scsw.cmd.count);
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 3b94044..43068fb 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/miscdevice.h>
#include <linux/debugfs.h>
+#include <linux/module.h>
#include <asm/asm-offsets.h>
#include <asm/ipl.h>
#include <asm/sclp.h>
@@ -142,22 +143,6 @@
return memcpy_hsa(dest, src, count, TO_KERNEL);
}
-static int memcpy_real_user(void __user *dest, unsigned long src, size_t count)
-{
- static char buf[4096];
- int offs = 0, size;
-
- while (offs < count) {
- size = min(sizeof(buf), count - offs);
- if (memcpy_real(buf, (void *) src + offs, size))
- return -EFAULT;
- if (copy_to_user(dest + offs, buf, size))
- return -EFAULT;
- offs += size;
- }
- return 0;
-}
-
static int __init init_cpu_info(enum arch_id arch)
{
struct save_area *sa;
@@ -346,8 +331,8 @@
/* Copy from real mem */
size = count - mem_offs - hdr_count;
- rc = memcpy_real_user(buf + hdr_count + mem_offs, mem_start + mem_offs,
- size);
+ rc = copy_to_user_real(buf + hdr_count + mem_offs,
+ (void *) mem_start + mem_offs, size);
if (rc)
goto fail;
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 5c56741..4f1989d 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -29,31 +29,20 @@
/* a device matches a driver if all its slave devices match the same
* entry of the driver */
-static int
-ccwgroup_bus_match (struct device * dev, struct device_driver * drv)
+static int ccwgroup_bus_match(struct device *dev, struct device_driver * drv)
{
- struct ccwgroup_device *gdev;
- struct ccwgroup_driver *gdrv;
-
- gdev = to_ccwgroupdev(dev);
- gdrv = to_ccwgroupdrv(drv);
+ struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+ struct ccwgroup_driver *gdrv = to_ccwgroupdrv(drv);
if (gdev->creator_id == gdrv->driver_id)
return 1;
return 0;
}
-static int
-ccwgroup_uevent (struct device *dev, struct kobj_uevent_env *env)
-{
- /* TODO */
- return 0;
-}
static struct bus_type ccwgroup_bus_type;
-static void
-__ccwgroup_remove_symlinks(struct ccwgroup_device *gdev)
+static void __ccwgroup_remove_symlinks(struct ccwgroup_device *gdev)
{
int i;
char str[8];
@@ -63,7 +52,6 @@
sysfs_remove_link(&gdev->dev.kobj, str);
sysfs_remove_link(&gdev->cdev[i]->dev.kobj, "group_device");
}
-
}
/*
@@ -87,6 +75,87 @@
}
}
+static int ccwgroup_set_online(struct ccwgroup_device *gdev)
+{
+ struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+ int ret = 0;
+
+ if (atomic_cmpxchg(&gdev->onoff, 0, 1) != 0)
+ return -EAGAIN;
+ if (gdev->state == CCWGROUP_ONLINE)
+ goto out;
+ if (gdrv->set_online)
+ ret = gdrv->set_online(gdev);
+ if (ret)
+ goto out;
+
+ gdev->state = CCWGROUP_ONLINE;
+out:
+ atomic_set(&gdev->onoff, 0);
+ return ret;
+}
+
+static int ccwgroup_set_offline(struct ccwgroup_device *gdev)
+{
+ struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+ int ret = 0;
+
+ if (atomic_cmpxchg(&gdev->onoff, 0, 1) != 0)
+ return -EAGAIN;
+ if (gdev->state == CCWGROUP_OFFLINE)
+ goto out;
+ if (gdrv->set_offline)
+ ret = gdrv->set_offline(gdev);
+ if (ret)
+ goto out;
+
+ gdev->state = CCWGROUP_OFFLINE;
+out:
+ atomic_set(&gdev->onoff, 0);
+ return ret;
+}
+
+static ssize_t ccwgroup_online_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+ struct ccwgroup_driver *gdrv = to_ccwgroupdrv(dev->driver);
+ unsigned long value;
+ int ret;
+
+ if (!dev->driver)
+ return -EINVAL;
+ if (!try_module_get(gdrv->driver.owner))
+ return -EINVAL;
+
+ ret = strict_strtoul(buf, 0, &value);
+ if (ret)
+ goto out;
+
+ if (value == 1)
+ ret = ccwgroup_set_online(gdev);
+ else if (value == 0)
+ ret = ccwgroup_set_offline(gdev);
+ else
+ ret = -EINVAL;
+out:
+ module_put(gdrv->driver.owner);
+ return (ret == 0) ? count : ret;
+}
+
+static ssize_t ccwgroup_online_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+ int online;
+
+ online = (gdev->state == CCWGROUP_ONLINE) ? 1 : 0;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", online);
+}
+
/*
* Provide an 'ungroup' attribute so the user can remove group devices no
* longer needed or accidentially created. Saves memory :)
@@ -104,14 +173,13 @@
mutex_unlock(&gdev->reg_mutex);
}
-static ssize_t
-ccwgroup_ungroup_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t ccwgroup_ungroup_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct ccwgroup_device *gdev;
+ struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
int rc;
- gdev = to_ccwgroupdev(dev);
-
/* Prevent concurrent online/offline processing and ungrouping. */
if (atomic_cmpxchg(&gdev->onoff, 0, 1) != 0)
return -EAGAIN;
@@ -132,24 +200,35 @@
}
return count;
}
-
static DEVICE_ATTR(ungroup, 0200, NULL, ccwgroup_ungroup_store);
+static DEVICE_ATTR(online, 0644, ccwgroup_online_show, ccwgroup_online_store);
-static void
-ccwgroup_release (struct device *dev)
+static struct attribute *ccwgroup_attrs[] = {
+ &dev_attr_online.attr,
+ &dev_attr_ungroup.attr,
+ NULL,
+};
+static struct attribute_group ccwgroup_attr_group = {
+ .attrs = ccwgroup_attrs,
+};
+static const struct attribute_group *ccwgroup_attr_groups[] = {
+ &ccwgroup_attr_group,
+ NULL,
+};
+
+static void ccwgroup_release(struct device *dev)
{
kfree(to_ccwgroupdev(dev));
}
-static int
-__ccwgroup_create_symlinks(struct ccwgroup_device *gdev)
+static int __ccwgroup_create_symlinks(struct ccwgroup_device *gdev)
{
char str[8];
int i, rc;
for (i = 0; i < gdev->count; i++) {
- rc = sysfs_create_link(&gdev->cdev[i]->dev.kobj, &gdev->dev.kobj,
- "group_device");
+ rc = sysfs_create_link(&gdev->cdev[i]->dev.kobj,
+ &gdev->dev.kobj, "group_device");
if (rc) {
for (--i; i >= 0; i--)
sysfs_remove_link(&gdev->cdev[i]->dev.kobj,
@@ -159,8 +238,8 @@
}
for (i = 0; i < gdev->count; i++) {
sprintf(str, "cdev%d", i);
- rc = sysfs_create_link(&gdev->dev.kobj, &gdev->cdev[i]->dev.kobj,
- str);
+ rc = sysfs_create_link(&gdev->dev.kobj,
+ &gdev->cdev[i]->dev.kobj, str);
if (rc) {
for (--i; i >= 0; i--) {
sprintf(str, "cdev%d", i);
@@ -293,26 +372,17 @@
}
dev_set_name(&gdev->dev, "%s", dev_name(&gdev->cdev[0]->dev));
-
+ gdev->dev.groups = ccwgroup_attr_groups;
rc = device_add(&gdev->dev);
if (rc)
goto error;
- get_device(&gdev->dev);
- rc = device_create_file(&gdev->dev, &dev_attr_ungroup);
-
+ rc = __ccwgroup_create_symlinks(gdev);
if (rc) {
- device_unregister(&gdev->dev);
+ device_del(&gdev->dev);
goto error;
}
-
- rc = __ccwgroup_create_symlinks(gdev);
- if (!rc) {
- mutex_unlock(&gdev->reg_mutex);
- put_device(&gdev->dev);
- return 0;
- }
- device_remove_file(&gdev->dev, &dev_attr_ungroup);
- device_unregister(&gdev->dev);
+ mutex_unlock(&gdev->reg_mutex);
+ return 0;
error:
for (i = 0; i < num_devices; i++)
if (gdev->cdev[i]) {
@@ -330,7 +400,15 @@
EXPORT_SYMBOL(ccwgroup_create_from_string);
static int ccwgroup_notifier(struct notifier_block *nb, unsigned long action,
- void *data);
+ void *data)
+{
+ struct device *dev = data;
+
+ if (action == BUS_NOTIFY_UNBIND_DRIVER)
+ device_schedule_callback(dev, ccwgroup_ungroup_callback);
+
+ return NOTIFY_OK;
+}
static struct notifier_block ccwgroup_nb = {
.notifier_call = ccwgroup_notifier
@@ -362,138 +440,21 @@
/************************** driver stuff ******************************/
-static int
-ccwgroup_set_online(struct ccwgroup_device *gdev)
+static int ccwgroup_probe(struct device *dev)
{
- struct ccwgroup_driver *gdrv;
- int ret;
+ struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+ struct ccwgroup_driver *gdrv = to_ccwgroupdrv(dev->driver);
- if (atomic_cmpxchg(&gdev->onoff, 0, 1) != 0)
- return -EAGAIN;
- if (gdev->state == CCWGROUP_ONLINE) {
- ret = 0;
- goto out;
- }
- if (!gdev->dev.driver) {
- ret = -EINVAL;
- goto out;
- }
- gdrv = to_ccwgroupdrv (gdev->dev.driver);
- if ((ret = gdrv->set_online ? gdrv->set_online(gdev) : 0))
- goto out;
-
- gdev->state = CCWGROUP_ONLINE;
- out:
- atomic_set(&gdev->onoff, 0);
- return ret;
+ return gdrv->probe ? gdrv->probe(gdev) : -ENODEV;
}
-static int
-ccwgroup_set_offline(struct ccwgroup_device *gdev)
+static int ccwgroup_remove(struct device *dev)
{
- struct ccwgroup_driver *gdrv;
- int ret;
-
- if (atomic_cmpxchg(&gdev->onoff, 0, 1) != 0)
- return -EAGAIN;
- if (gdev->state == CCWGROUP_OFFLINE) {
- ret = 0;
- goto out;
- }
- if (!gdev->dev.driver) {
- ret = -EINVAL;
- goto out;
- }
- gdrv = to_ccwgroupdrv (gdev->dev.driver);
- if ((ret = gdrv->set_offline ? gdrv->set_offline(gdev) : 0))
- goto out;
-
- gdev->state = CCWGROUP_OFFLINE;
- out:
- atomic_set(&gdev->onoff, 0);
- return ret;
-}
-
-static ssize_t
-ccwgroup_online_store (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
- struct ccwgroup_device *gdev;
- struct ccwgroup_driver *gdrv;
- unsigned long value;
- int ret;
-
- if (!dev->driver)
- return -ENODEV;
-
- gdev = to_ccwgroupdev(dev);
- gdrv = to_ccwgroupdrv(dev->driver);
-
- if (!try_module_get(gdrv->driver.owner))
- return -EINVAL;
-
- ret = strict_strtoul(buf, 0, &value);
- if (ret)
- goto out;
-
- if (value == 1)
- ret = ccwgroup_set_online(gdev);
- else if (value == 0)
- ret = ccwgroup_set_offline(gdev);
- else
- ret = -EINVAL;
-out:
- module_put(gdrv->driver.owner);
- return (ret == 0) ? count : ret;
-}
-
-static ssize_t
-ccwgroup_online_show (struct device *dev, struct device_attribute *attr, char *buf)
-{
- int online;
-
- online = (to_ccwgroupdev(dev)->state == CCWGROUP_ONLINE);
-
- return sprintf(buf, online ? "1\n" : "0\n");
-}
-
-static DEVICE_ATTR(online, 0644, ccwgroup_online_show, ccwgroup_online_store);
-
-static int
-ccwgroup_probe (struct device *dev)
-{
- struct ccwgroup_device *gdev;
- struct ccwgroup_driver *gdrv;
-
- int ret;
-
- gdev = to_ccwgroupdev(dev);
- gdrv = to_ccwgroupdrv(dev->driver);
-
- if ((ret = device_create_file(dev, &dev_attr_online)))
- return ret;
-
- ret = gdrv->probe ? gdrv->probe(gdev) : -ENODEV;
- if (ret)
- device_remove_file(dev, &dev_attr_online);
-
- return ret;
-}
-
-static int
-ccwgroup_remove (struct device *dev)
-{
- struct ccwgroup_device *gdev;
- struct ccwgroup_driver *gdrv;
-
- device_remove_file(dev, &dev_attr_online);
- device_remove_file(dev, &dev_attr_ungroup);
+ struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+ struct ccwgroup_driver *gdrv = to_ccwgroupdrv(dev->driver);
if (!dev->driver)
return 0;
-
- gdev = to_ccwgroupdev(dev);
- gdrv = to_ccwgroupdrv(dev->driver);
-
if (gdrv->remove)
gdrv->remove(gdev);
@@ -502,15 +463,11 @@
static void ccwgroup_shutdown(struct device *dev)
{
- struct ccwgroup_device *gdev;
- struct ccwgroup_driver *gdrv;
+ struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+ struct ccwgroup_driver *gdrv = to_ccwgroupdrv(dev->driver);
if (!dev->driver)
return;
-
- gdev = to_ccwgroupdev(dev);
- gdrv = to_ccwgroupdrv(dev->driver);
-
if (gdrv->shutdown)
gdrv->shutdown(gdev);
}
@@ -586,26 +543,12 @@
static struct bus_type ccwgroup_bus_type = {
.name = "ccwgroup",
.match = ccwgroup_bus_match,
- .uevent = ccwgroup_uevent,
.probe = ccwgroup_probe,
.remove = ccwgroup_remove,
.shutdown = ccwgroup_shutdown,
.pm = &ccwgroup_pm_ops,
};
-
-static int ccwgroup_notifier(struct notifier_block *nb, unsigned long action,
- void *data)
-{
- struct device *dev = data;
-
- if (action == BUS_NOTIFY_UNBIND_DRIVER)
- device_schedule_callback(dev, ccwgroup_ungroup_callback);
-
- return NOTIFY_OK;
-}
-
-
/**
* ccwgroup_driver_register() - register a ccw group driver
* @cdriver: driver to be registered
@@ -619,9 +562,9 @@
return driver_register(&cdriver->driver);
}
+EXPORT_SYMBOL(ccwgroup_driver_register);
-static int
-__ccwgroup_match_all(struct device *dev, void *data)
+static int __ccwgroup_match_all(struct device *dev, void *data)
{
return 1;
}
@@ -652,6 +595,7 @@
put_driver(&cdriver->driver);
driver_unregister(&cdriver->driver);
}
+EXPORT_SYMBOL(ccwgroup_driver_unregister);
/**
* ccwgroup_probe_ccwdev() - probe function for slave devices
@@ -666,6 +610,7 @@
{
return 0;
}
+EXPORT_SYMBOL(ccwgroup_probe_ccwdev);
/**
* ccwgroup_remove_ccwdev() - remove function for slave devices
@@ -702,9 +647,5 @@
/* Release ccwgroup device reference for local processing. */
put_device(&gdev->dev);
}
-
-MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(ccwgroup_driver_register);
-EXPORT_SYMBOL(ccwgroup_driver_unregister);
-EXPORT_SYMBOL(ccwgroup_probe_ccwdev);
EXPORT_SYMBOL(ccwgroup_remove_ccwdev);
+MODULE_LICENSE("GPL");
diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c
index d15f8b4..5156264 100644
--- a/drivers/s390/cio/ccwreq.c
+++ b/drivers/s390/cio/ccwreq.c
@@ -1,10 +1,13 @@
/*
* Handling of internal CCW device requests.
*
- * Copyright IBM Corp. 2009
+ * Copyright IBM Corp. 2009, 2011
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
+#define KMSG_COMPONENT "cio"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/types.h>
#include <linux/err.h>
#include <asm/ccwdev.h>
@@ -323,7 +326,21 @@
{
struct subchannel *sch = to_subchannel(cdev->dev.parent);
struct ccw_request *req = &cdev->private->req;
- int rc;
+ int rc = -ENODEV, chp;
+
+ if (cio_update_schib(sch))
+ goto err;
+
+ for (chp = 0; chp < 8; chp++) {
+ if ((0x80 >> chp) & sch->schib.pmcw.lpum)
+ pr_warning("%s: No interrupt was received within %lus "
+ "(CS=%02x, DS=%02x, CHPID=%x.%02x)\n",
+ dev_name(&cdev->dev), req->timeout / HZ,
+ scsw_cstat(&sch->schib.scsw),
+ scsw_dstat(&sch->schib.scsw),
+ sch->schid.cssid,
+ sch->schib.pmcw.chpid[chp]);
+ }
if (!ccwreq_next_path(cdev)) {
/* set the final return code for this request */
@@ -342,7 +359,7 @@
* ccw_request_notoper - notoper handler for I/O request procedure
* @cdev: ccw device
*
- * Handle timeout during I/O request procedure.
+ * Handle notoper during I/O request procedure.
*/
void ccw_request_notoper(struct ccw_device *cdev)
{
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index e950f1a..0c87b0f 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -1,7 +1,7 @@
/*
* Driver for s390 chsc subchannels
*
- * Copyright IBM Corp. 2008, 2009
+ * Copyright IBM Corp. 2008, 2011
*
* Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
*
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
+#include <linux/kernel_stat.h>
#include <asm/compat.h>
#include <asm/cio.h>
@@ -56,6 +57,8 @@
CHSC_LOG(4, "irb");
CHSC_LOG_HEX(4, irb, sizeof(*irb));
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CSC]++;
+
/* Copy irb to provided request and set done. */
if (!request) {
CHSC_MSG(0, "Interrupt on sch 0.%x.%04x with no request\n",
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index eb3140e..dc67c39 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -622,6 +622,7 @@
sch = (struct subchannel *)(unsigned long)tpi_info->intparm;
if (!sch) {
/* Clear pending interrupt condition. */
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
tsch(tpi_info->schid, irb);
continue;
}
@@ -634,7 +635,10 @@
/* Call interrupt handler if there is one. */
if (sch->driver && sch->driver->irq)
sch->driver->irq(sch);
- }
+ else
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
+ } else
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
spin_unlock(sch->lock);
/*
* Are more interrupts pending?
@@ -667,18 +671,23 @@
tpi_info = (struct tpi_info *)&S390_lowcore.subchannel_id;
if (tpi(NULL) != 1)
return 0;
+ kstat_cpu(smp_processor_id()).irqs[IO_INTERRUPT]++;
if (tpi_info->adapter_IO) {
do_adapter_IO(tpi_info->isc);
return 1;
}
irb = (struct irb *)&S390_lowcore.irb;
/* Store interrupt response block to lowcore. */
- if (tsch(tpi_info->schid, irb) != 0)
+ if (tsch(tpi_info->schid, irb) != 0) {
/* Not status pending or not operational. */
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
return 1;
+ }
sch = (struct subchannel *)(unsigned long)tpi_info->intparm;
- if (!sch)
+ if (!sch) {
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
return 1;
+ }
irq_context = in_interrupt();
if (!irq_context)
local_bh_disable();
@@ -687,6 +696,8 @@
memcpy(&sch->schib.scsw, &irb->scsw, sizeof(union scsw));
if (sch->driver && sch->driver->irq)
sch->driver->irq(sch);
+ else
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
spin_unlock(sch->lock);
irq_exit();
if (!irq_context)
@@ -1058,7 +1069,7 @@
{
struct subchannel_id schid;
- s390_reset_system();
+ s390_reset_system(NULL, NULL);
if (reipl_find_schid(devid, &schid) != 0)
panic("IPL Device not found\n");
do_reipl_asm(*((__u32*)&schid));
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 80ebddd..33bb4d8 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -133,6 +133,8 @@
extern struct channel_subsystem *channel_subsystems[];
+void channel_subsystem_reinit(void);
+
/* Helper functions to build lists for the slow path. */
void css_schedule_eval(struct subchannel_id schid);
void css_schedule_eval_all(void);
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 8e04c00..d734f4a 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -21,6 +21,7 @@
#include <linux/device.h>
#include <linux/workqueue.h>
#include <linux/timer.h>
+#include <linux/kernel_stat.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
@@ -747,6 +748,7 @@
struct ccw_device *cdev)
{
cdev->private->cdev = cdev;
+ cdev->private->int_class = IOINT_CIO;
atomic_set(&cdev->private->onoff, 0);
cdev->dev.parent = &sch->dev;
cdev->dev.release = ccw_device_release;
@@ -1010,6 +1012,8 @@
CIO_TRACE_EVENT(6, dev_name(&sch->dev));
if (cdev)
dev_fsm_event(cdev, DEV_EVENT_INTERRUPT);
+ else
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
}
void io_subchannel_init_config(struct subchannel *sch)
@@ -1621,6 +1625,7 @@
memset(&console_private, 0, sizeof(struct ccw_device_private));
console_cdev.private = &console_private;
console_private.cdev = &console_cdev;
+ console_private.int_class = IOINT_CIO;
ret = ccw_device_console_enable(&console_cdev, sch);
if (ret) {
cio_release_console();
@@ -1702,11 +1707,18 @@
int ret;
cdev->drv = cdrv; /* to let the driver call _set_online */
+ /* Note: we interpret class 0 in this context as an uninitialized
+ * field since it translates to a non-I/O interrupt class. */
+ if (cdrv->int_class != 0)
+ cdev->private->int_class = cdrv->int_class;
+ else
+ cdev->private->int_class = IOINT_CIO;
ret = cdrv->probe ? cdrv->probe(cdev) : -ENODEV;
if (ret) {
cdev->drv = NULL;
+ cdev->private->int_class = IOINT_CIO;
return ret;
}
@@ -1740,6 +1752,7 @@
}
ccw_device_set_timeout(cdev, 0);
cdev->drv = NULL;
+ cdev->private->int_class = IOINT_CIO;
return 0;
}
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index 0b7245c..179824b 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -5,6 +5,7 @@
#include <linux/atomic.h>
#include <linux/wait.h>
#include <linux/notifier.h>
+#include <linux/kernel_stat.h>
#include "io_sch.h"
/*
@@ -56,7 +57,17 @@
static inline void
dev_fsm_event(struct ccw_device *cdev, enum dev_event dev_event)
{
- dev_jumptable[cdev->private->state][dev_event](cdev, dev_event);
+ int state = cdev->private->state;
+
+ if (dev_event == DEV_EVENT_INTERRUPT) {
+ if (state == DEV_STATE_ONLINE)
+ kstat_cpu(smp_processor_id()).
+ irqs[cdev->private->int_class]++;
+ else if (state != DEV_STATE_CMFCHANGE &&
+ state != DEV_STATE_CMFUPDATE)
+ kstat_cpu(smp_processor_id()).irqs[IOINT_CIO]++;
+ }
+ dev_jumptable[state][dev_event](cdev, dev_event);
}
/*
diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h
index ba31ad8..2ebb492 100644
--- a/drivers/s390/cio/io_sch.h
+++ b/drivers/s390/cio/io_sch.h
@@ -4,6 +4,7 @@
#include <linux/types.h>
#include <asm/schid.h>
#include <asm/ccwdev.h>
+#include <asm/irq.h>
#include "css.h"
#include "orb.h"
@@ -157,6 +158,7 @@
struct list_head cmb_list; /* list of measured devices */
u64 cmb_start_time; /* clock value of cmb reset */
void *cmb_wait; /* deferred cmb enable/disable */
+ enum interruption_class int_class;
};
static inline int rsch(struct subchannel_id schid)
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index 3dd8644..b962ffb 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -18,14 +18,6 @@
#define QDIO_BUSY_BIT_RETRIES 1000 /* = 10s retry time */
#define QDIO_INPUT_THRESHOLD (500 << 12) /* 500 microseconds */
-/*
- * if an asynchronous HiperSockets queue runs full, the 10 seconds timer wait
- * till next initiative to give transmitted skbs back to the stack is too long.
- * Therefore polling is started in case of multicast queue is filled more
- * than 50 percent.
- */
-#define QDIO_IQDIO_POLL_LVL 65 /* HS multicast queue */
-
enum qdio_irq_states {
QDIO_IRQ_STATE_INACTIVE,
QDIO_IRQ_STATE_ESTABLISHED,
@@ -290,6 +282,9 @@
/* error condition during a data transfer */
unsigned int qdio_error;
+ /* last scan of the queue */
+ u64 timestamp;
+
struct tasklet_struct tasklet;
struct qdio_queue_perf_stat q_stats;
@@ -423,31 +418,7 @@
#define queue_irqs_disabled(q) \
(test_bit(QDIO_QUEUE_IRQS_DISABLED, &q->u.in.queue_irq_state) != 0)
-#define TIQDIO_SHARED_IND 63
-
-/* device state change indicators */
-struct indicator_t {
- u32 ind; /* u32 because of compare-and-swap performance */
- atomic_t count; /* use count, 0 or 1 for non-shared indicators */
-};
-
-extern struct indicator_t *q_indicators;
-
-static inline int has_multiple_inq_on_dsci(struct qdio_irq *irq)
-{
- return irq->nr_input_qs > 1;
-}
-
-static inline int references_shared_dsci(struct qdio_irq *irq)
-{
- return irq->dsci == &q_indicators[TIQDIO_SHARED_IND].ind;
-}
-
-static inline int shared_ind(struct qdio_q *q)
-{
- struct qdio_irq *i = q->irq_ptr;
- return references_shared_dsci(i) || has_multiple_inq_on_dsci(i);
-}
+extern u64 last_ai_time;
/* prototypes for thin interrupt */
void qdio_setup_thinint(struct qdio_irq *irq_ptr);
@@ -460,7 +431,8 @@
void tiqdio_free_memory(void);
int tiqdio_register_thinints(void);
void tiqdio_unregister_thinints(void);
-
+void clear_nonshared_ind(struct qdio_irq *);
+int test_nonshared_ind(struct qdio_irq *);
/* prototypes for setup */
void qdio_inbound_processing(unsigned long data);
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index aaf7f93..ed68245 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -54,15 +54,17 @@
if (!q)
return 0;
- seq_printf(m, "DSCI: %d nr_used: %d\n",
- *(u32 *)q->irq_ptr->dsci, atomic_read(&q->nr_buf_used));
- seq_printf(m, "ftc: %d last_move: %d\n",
+ seq_printf(m, "Timestamp: %Lx Last AI: %Lx\n",
+ q->timestamp, last_ai_time);
+ seq_printf(m, "nr_used: %d ftc: %d last_move: %d\n",
+ atomic_read(&q->nr_buf_used),
q->first_to_check, q->last_move);
if (q->is_input_q) {
seq_printf(m, "polling: %d ack start: %d ack count: %d\n",
q->u.in.polling, q->u.in.ack_start,
q->u.in.ack_count);
- seq_printf(m, "IRQs disabled: %u\n",
+ seq_printf(m, "DSCI: %d IRQs disabled: %u\n",
+ *(u32 *)q->irq_ptr->dsci,
test_bit(QDIO_QUEUE_IRQS_DISABLED,
&q->u.in.queue_irq_state));
}
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 9a12228..3ef8d07 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -15,7 +15,6 @@
#include <linux/delay.h>
#include <linux/gfp.h>
#include <linux/io.h>
-#include <linux/kernel_stat.h>
#include <linux/atomic.h>
#include <asm/debug.h>
#include <asm/qdio.h>
@@ -105,9 +104,12 @@
/* all done or next buffer state different */
if (ccq == 0 || ccq == 32)
return 0;
- /* not all buffers processed */
- if (ccq == 96 || ccq == 97)
+ /* no buffer processed */
+ if (ccq == 97)
return 1;
+ /* not all buffers processed */
+ if (ccq == 96)
+ return 2;
/* notify devices immediately */
DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq);
return -EIO;
@@ -127,10 +129,8 @@
static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state,
int start, int count, int auto_ack)
{
+ int rc, tmp_count = count, tmp_start = start, nr = q->nr, retried = 0;
unsigned int ccq = 0;
- int tmp_count = count, tmp_start = start;
- int nr = q->nr;
- int rc;
BUG_ON(!q->irq_ptr->sch_token);
qperf_inc(q, eqbs);
@@ -141,29 +141,34 @@
ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count,
auto_ack);
rc = qdio_check_ccq(q, ccq);
-
- /* At least one buffer was processed, return and extract the remaining
- * buffers later.
- */
- if ((ccq == 96) && (count != tmp_count)) {
- qperf_inc(q, eqbs_partial);
- return (count - tmp_count);
- }
+ if (!rc)
+ return count - tmp_count;
if (rc == 1) {
DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS again:%2d", ccq);
goto again;
}
- if (rc < 0) {
- DBF_ERROR("%4x EQBS ERROR", SCH_NO(q));
- DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
- q->handler(q->irq_ptr->cdev,
- QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
- 0, -1, -1, q->irq_ptr->int_parm);
- return 0;
+ if (rc == 2) {
+ BUG_ON(tmp_count == count);
+ qperf_inc(q, eqbs_partial);
+ DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS part:%02x",
+ tmp_count);
+ /*
+ * Retry once, if that fails bail out and process the
+ * extracted buffers before trying again.
+ */
+ if (!retried++)
+ goto again;
+ else
+ return count - tmp_count;
}
- return count - tmp_count;
+
+ DBF_ERROR("%4x EQBS ERROR", SCH_NO(q));
+ DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
+ q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
+ 0, -1, -1, q->irq_ptr->int_parm);
+ return 0;
}
/**
@@ -196,21 +201,22 @@
again:
ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count);
rc = qdio_check_ccq(q, ccq);
- if (rc == 1) {
+ if (!rc) {
+ WARN_ON(tmp_count);
+ return count - tmp_count;
+ }
+
+ if (rc == 1 || rc == 2) {
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq);
qperf_inc(q, sqbs_partial);
goto again;
}
- if (rc < 0) {
- DBF_ERROR("%4x SQBS ERROR", SCH_NO(q));
- DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
- q->handler(q->irq_ptr->cdev,
- QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
- 0, -1, -1, q->irq_ptr->int_parm);
- return 0;
- }
- WARN_ON(tmp_count);
- return count - tmp_count;
+
+ DBF_ERROR("%4x SQBS ERROR", SCH_NO(q));
+ DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
+ q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
+ 0, -1, -1, q->irq_ptr->int_parm);
+ return 0;
}
/* returns number of examined buffers and their common state in *state */
@@ -275,7 +281,7 @@
}
/* set slsb states to initial state */
-void qdio_init_buf_states(struct qdio_irq *irq_ptr)
+static void qdio_init_buf_states(struct qdio_irq *irq_ptr)
{
struct qdio_q *q;
int i;
@@ -444,7 +450,7 @@
qperf_inc(q, target_full);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x",
q->first_to_check);
- return;
+ goto set;
}
DBF_ERROR("%4x BUF ERROR", SCH_NO(q));
@@ -454,6 +460,7 @@
q->sbal[q->first_to_check]->element[14].sflags,
q->sbal[q->first_to_check]->element[15].sflags);
+set:
/*
* Interrupts may be avoided as long as the error is present
* so change the buffer state immediately to avoid starvation.
@@ -511,6 +518,8 @@
int count, stop;
unsigned char state = 0;
+ q->timestamp = get_clock_fast();
+
/*
* Don't check 128 buffers, as otherwise qdio_inbound_q_moved
* would return 0.
@@ -780,6 +789,8 @@
int count, stop;
unsigned char state = 0;
+ q->timestamp = get_clock_fast();
+
if (need_siga_sync(q))
if (((queue_type(q) != QDIO_IQDIO_QFMT) &&
!pci_out_supported(q)) ||
@@ -910,21 +921,13 @@
if (!pci_out_supported(q) && !qdio_outbound_q_done(q))
goto sched;
- /* bail out for HiperSockets unicast queues */
- if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q))
- return;
-
- if ((queue_type(q) == QDIO_IQDIO_QFMT) &&
- (atomic_read(&q->nr_buf_used)) > QDIO_IQDIO_POLL_LVL)
- goto sched;
-
if (q->u.out.pci_out_enabled)
return;
/*
* Now we know that queue type is either qeth without pci enabled
- * or HiperSockets multicast. Make sure buffer switch from PRIMED to
- * EMPTY is noticed and outbound_handler is called after some time.
+ * or HiperSockets. Make sure buffer switch from PRIMED to EMPTY
+ * is noticed and outbound_handler is called after some time.
*/
if (qdio_outbound_q_done(q))
del_timer(&q->u.out.timer);
@@ -1070,6 +1073,7 @@
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
struct qdio_q *q;
+ int count;
DBF_ERROR("%4x ACT CHECK", irq_ptr->schid.sch_no);
DBF_ERROR("intp :%lx", intparm);
@@ -1083,8 +1087,10 @@
dump_stack();
goto no_handler;
}
+
+ count = sub_buf(q->first_to_check, q->first_to_kick);
q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
- 0, -1, -1, irq_ptr->int_parm);
+ q->nr, q->first_to_kick, count, irq_ptr->int_parm);
no_handler:
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
}
@@ -1123,7 +1129,6 @@
return;
}
- kstat_cpu(smp_processor_id()).irqs[IOINT_QDI]++;
if (irq_ptr->perf_stat_enabled)
irq_ptr->perf_stat.qdio_int++;
@@ -1714,9 +1719,7 @@
WARN_ON(queue_irqs_enabled(q));
- if (!shared_ind(q))
- xchg(q->irq_ptr->dsci, 0);
-
+ clear_nonshared_ind(irq_ptr);
qdio_stop_polling(q);
clear_bit(QDIO_QUEUE_IRQS_DISABLED, &q->u.in.queue_irq_state);
@@ -1724,7 +1727,7 @@
* We need to check again to not lose initiative after
* resetting the ACK state.
*/
- if (!shared_ind(q) && *q->irq_ptr->dsci)
+ if (test_nonshared_ind(irq_ptr))
goto rescan;
if (!qdio_inbound_q_done(q))
goto rescan;
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index dd8bd67..d9a46a4 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -381,6 +381,7 @@
int i;
irq_ptr->qdr->qfmt = qdio_init->q_format;
+ irq_ptr->qdr->ac = qdio_init->qdr_ac;
irq_ptr->qdr->iqdcnt = qdio_init->no_input_qs;
irq_ptr->qdr->oqdcnt = qdio_init->no_output_qs;
irq_ptr->qdr->iqdsz = sizeof(struct qdesfmt0) / 4; /* size in words */
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index a3e3949..011eade 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -26,17 +26,24 @@
*/
#define TIQDIO_NR_NONSHARED_IND 63
#define TIQDIO_NR_INDICATORS (TIQDIO_NR_NONSHARED_IND + 1)
+#define TIQDIO_SHARED_IND 63
+
+/* device state change indicators */
+struct indicator_t {
+ u32 ind; /* u32 because of compare-and-swap performance */
+ atomic_t count; /* use count, 0 or 1 for non-shared indicators */
+};
/* list of thin interrupt input queues */
static LIST_HEAD(tiq_list);
-DEFINE_MUTEX(tiq_list_lock);
+static DEFINE_MUTEX(tiq_list_lock);
/* adapter local summary indicator */
static u8 *tiqdio_alsi;
-struct indicator_t *q_indicators;
+static struct indicator_t *q_indicators;
-static u64 last_ai_time;
+u64 last_ai_time;
/* returns addr for the device state change indicator */
static u32 *get_indicator(void)
@@ -90,6 +97,43 @@
synchronize_rcu();
}
+static inline int has_multiple_inq_on_dsci(struct qdio_irq *irq_ptr)
+{
+ return irq_ptr->nr_input_qs > 1;
+}
+
+static inline int references_shared_dsci(struct qdio_irq *irq_ptr)
+{
+ return irq_ptr->dsci == &q_indicators[TIQDIO_SHARED_IND].ind;
+}
+
+static inline int shared_ind(struct qdio_irq *irq_ptr)
+{
+ return references_shared_dsci(irq_ptr) ||
+ has_multiple_inq_on_dsci(irq_ptr);
+}
+
+void clear_nonshared_ind(struct qdio_irq *irq_ptr)
+{
+ if (!is_thinint_irq(irq_ptr))
+ return;
+ if (shared_ind(irq_ptr))
+ return;
+ xchg(irq_ptr->dsci, 0);
+}
+
+int test_nonshared_ind(struct qdio_irq *irq_ptr)
+{
+ if (!is_thinint_irq(irq_ptr))
+ return 0;
+ if (shared_ind(irq_ptr))
+ return 0;
+ if (*irq_ptr->dsci)
+ return 1;
+ else
+ return 0;
+}
+
static inline u32 clear_shared_ind(void)
{
if (!atomic_read(&q_indicators[TIQDIO_SHARED_IND].count))
@@ -119,7 +163,7 @@
q->u.in.queue_start_poll(q->irq_ptr->cdev, q->nr,
q->irq_ptr->int_parm);
} else {
- if (!shared_ind(q))
+ if (!shared_ind(q->irq_ptr))
xchg(q->irq_ptr->dsci, 0);
/*
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index aec60d5..3c2c923 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -33,7 +33,7 @@
* The pointer to our (page) of device descriptions.
*/
static void *kvm_devices;
-struct work_struct hotplug_work;
+static struct work_struct hotplug_work;
struct kvm_device {
struct virtio_device vdev;
@@ -334,10 +334,10 @@
*/
static int match_desc(struct device *dev, void *data)
{
- if ((ulong)to_kvmdev(dev_to_virtio(dev))->desc == (ulong)data)
- return 1;
+ struct virtio_device *vdev = dev_to_virtio(dev);
+ struct kvm_device *kdev = to_kvmdev(vdev);
- return 0;
+ return kdev->desc == data;
}
/*
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index f1fa248..b41fae3 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -63,7 +63,6 @@
#define KMSG_COMPONENT "claw"
-#include <linux/kernel_stat.h>
#include <asm/ccwdev.h>
#include <asm/ccwgroup.h>
#include <asm/debug.h>
@@ -291,6 +290,7 @@
.ids = claw_ids,
.probe = ccwgroup_probe_ccwdev,
.remove = ccwgroup_remove_ccwdev,
+ .int_class = IOINT_CLW,
};
static ssize_t
@@ -645,7 +645,6 @@
struct claw_env *p_env;
struct chbk *p_ch_r=NULL;
- kstat_cpu(smp_processor_id()).irqs[IOINT_CLW]++;
CLAW_DBF_TEXT(4, trace, "clawirq");
/* Bypass all 'unsolicited interrupts' */
privptr = dev_get_drvdata(&cdev->dev);
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 426787e..5cb93a8 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -24,7 +24,6 @@
#define KMSG_COMPONENT "ctcm"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -1203,7 +1202,6 @@
int cstat;
int dstat;
- kstat_cpu(smp_processor_id()).irqs[IOINT_CTC]++;
CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
"Enter %s(%s)", CTCM_FUNTAIL, dev_name(&cdev->dev));
@@ -1769,6 +1767,7 @@
.ids = ctcm_ids,
.probe = ccwgroup_probe_ccwdev,
.remove = ccwgroup_remove_ccwdev,
+ .int_class = IOINT_CTC,
};
static struct ccwgroup_driver ctcm_group_driver = {
diff --git a/drivers/s390/net/ctcm_sysfs.c b/drivers/s390/net/ctcm_sysfs.c
index 8305319..650aec18 100644
--- a/drivers/s390/net/ctcm_sysfs.c
+++ b/drivers/s390/net/ctcm_sysfs.c
@@ -159,7 +159,7 @@
return count;
}
-const char *ctcm_type[] = {
+static const char *ctcm_type[] = {
"not a channel",
"CTC/A",
"FICON channel",
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index fb246b94..c28713d 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -26,7 +26,6 @@
#define KMSG_COMPONENT "lcs"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/if.h>
#include <linux/netdevice.h>
@@ -1399,7 +1398,6 @@
int rc, index;
int cstat, dstat;
- kstat_cpu(smp_processor_id()).irqs[IOINT_LCS]++;
if (lcs_check_irb_error(cdev, irb))
return;
@@ -1972,7 +1970,7 @@
static DEVICE_ATTR(portno, 0644, lcs_portno_show, lcs_portno_store);
-const char *lcs_type[] = {
+static const char *lcs_type[] = {
"not a channel",
"2216 parallel",
"2216 channel",
@@ -2399,6 +2397,7 @@
.ids = lcs_ids,
.probe = ccwgroup_probe_ccwdev,
.remove = ccwgroup_remove_ccwdev,
+ .int_class = IOINT_LCS,
};
/**
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index ce73520..e4c1176 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1415,7 +1415,7 @@
return 0;
}
-int qeth_l3_set_rx_csum(struct qeth_card *card, int on)
+static int qeth_l3_set_rx_csum(struct qeth_card *card, int on)
{
int rc = 0;
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 96d1462..967e7b7 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -163,6 +163,42 @@
spin_unlock_irqrestore(&dbf->hba_lock, flags);
}
+/**
+ * zfcp_dbf_hba_def_err - trace event for deferred error messages
+ * @adapter: pointer to struct zfcp_adapter
+ * @req_id: request id which caused the deferred error message
+ * @scount: number of sbals incl. the signaling sbal
+ * @pl: array of all involved sbals
+ */
+void zfcp_dbf_hba_def_err(struct zfcp_adapter *adapter, u64 req_id, u16 scount,
+ void **pl)
+{
+ struct zfcp_dbf *dbf = adapter->dbf;
+ struct zfcp_dbf_pay *payload = &dbf->pay_buf;
+ unsigned long flags;
+ u16 length;
+
+ if (!pl)
+ return;
+
+ spin_lock_irqsave(&dbf->pay_lock, flags);
+ memset(payload, 0, sizeof(*payload));
+
+ memcpy(payload->area, "def_err", 7);
+ payload->fsf_req_id = req_id;
+ payload->counter = 0;
+ length = min((u16)sizeof(struct qdio_buffer),
+ (u16)ZFCP_DBF_PAY_MAX_REC);
+
+ while ((char *)pl[payload->counter] && payload->counter < scount) {
+ memcpy(payload->data, (char *)pl[payload->counter], length);
+ debug_event(dbf->pay, 1, payload, zfcp_dbf_plen(length));
+ payload->counter++;
+ }
+
+ spin_unlock_irqrestore(&dbf->pay_lock, flags);
+}
+
static void zfcp_dbf_set_common(struct zfcp_dbf_rec *rec,
struct zfcp_adapter *adapter,
struct zfcp_port *port,
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 527ba48..ed5d921 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -72,6 +72,7 @@
#define ZFCP_STATUS_COMMON_NOESC 0x00200000
/* adapter status */
+#define ZFCP_STATUS_ADAPTER_MB_ACT 0x00000001
#define ZFCP_STATUS_ADAPTER_QDIOUP 0x00000002
#define ZFCP_STATUS_ADAPTER_SIOSL_ISSUED 0x00000004
#define ZFCP_STATUS_ADAPTER_XCONFIG_OK 0x00000008
@@ -314,4 +315,10 @@
void (*handler)(struct zfcp_fsf_req *);
};
+static inline
+int zfcp_adapter_multi_buffer_active(struct zfcp_adapter *adapter)
+{
+ return atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_MB_ACT;
+}
+
#endif /* ZFCP_DEF_H */
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 03627cfd..2302e1c 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -53,6 +53,7 @@
extern void zfcp_dbf_hba_fsf_res(char *, struct zfcp_fsf_req *);
extern void zfcp_dbf_hba_bit_err(char *, struct zfcp_fsf_req *);
extern void zfcp_dbf_hba_berr(struct zfcp_dbf *, struct zfcp_fsf_req *);
+extern void zfcp_dbf_hba_def_err(struct zfcp_adapter *, u64, u16, void **);
extern void zfcp_dbf_san_req(char *, struct zfcp_fsf_req *, u32);
extern void zfcp_dbf_san_res(char *, struct zfcp_fsf_req *);
extern void zfcp_dbf_san_in_els(char *, struct zfcp_fsf_req *);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 022fb6a..e9a787e 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -936,39 +936,47 @@
struct scatterlist *sg_resp)
{
struct zfcp_adapter *adapter = req->adapter;
+ struct zfcp_qdio *qdio = adapter->qdio;
+ struct fsf_qtcb *qtcb = req->qtcb;
u32 feat = adapter->adapter_features;
- int bytes;
- if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS)) {
- if (!zfcp_qdio_sg_one_sbale(sg_req) ||
- !zfcp_qdio_sg_one_sbale(sg_resp))
- return -EOPNOTSUPP;
+ if (zfcp_adapter_multi_buffer_active(adapter)) {
+ if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_req))
+ return -EIO;
+ if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_resp))
+ return -EIO;
- zfcp_fsf_setup_ct_els_unchained(adapter->qdio, &req->qdio_req,
- sg_req, sg_resp);
+ zfcp_qdio_set_data_div(qdio, &req->qdio_req,
+ zfcp_qdio_sbale_count(sg_req));
+ zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
+ zfcp_qdio_set_scount(qdio, &req->qdio_req);
return 0;
}
/* use single, unchained SBAL if it can hold the request */
if (zfcp_qdio_sg_one_sbale(sg_req) && zfcp_qdio_sg_one_sbale(sg_resp)) {
- zfcp_fsf_setup_ct_els_unchained(adapter->qdio, &req->qdio_req,
+ zfcp_fsf_setup_ct_els_unchained(qdio, &req->qdio_req,
sg_req, sg_resp);
return 0;
}
- bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->qdio_req, sg_req);
- if (bytes <= 0)
- return -EIO;
- zfcp_qdio_set_sbale_last(adapter->qdio, &req->qdio_req);
- req->qtcb->bottom.support.req_buf_length = bytes;
- zfcp_qdio_skip_to_last_sbale(&req->qdio_req);
+ if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS))
+ return -EOPNOTSUPP;
- bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->qdio_req,
- sg_resp);
- req->qtcb->bottom.support.resp_buf_length = bytes;
- if (bytes <= 0)
+ if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_req))
return -EIO;
- zfcp_qdio_set_sbale_last(adapter->qdio, &req->qdio_req);
+
+ qtcb->bottom.support.req_buf_length = zfcp_qdio_real_bytes(sg_req);
+
+ zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
+ zfcp_qdio_skip_to_last_sbale(qdio, &req->qdio_req);
+
+ if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_resp))
+ return -EIO;
+
+ qtcb->bottom.support.resp_buf_length = zfcp_qdio_real_bytes(sg_resp);
+
+ zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
return 0;
}
@@ -1119,7 +1127,8 @@
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- zfcp_qdio_sbal_limit(qdio, &req->qdio_req, 2);
+ if (!zfcp_adapter_multi_buffer_active(adapter))
+ zfcp_qdio_sbal_limit(qdio, &req->qdio_req, 2);
ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, timeout);
@@ -2162,7 +2171,7 @@
struct zfcp_fsf_req *req;
struct fcp_cmnd *fcp_cmnd;
u8 sbtype = SBAL_SFLAGS0_TYPE_READ;
- int real_bytes, retval = -EIO, dix_bytes = 0;
+ int retval = -EIO;
struct scsi_device *sdev = scsi_cmnd->device;
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
@@ -2207,7 +2216,8 @@
io->ref_tag_value = scsi_get_lba(scsi_cmnd) & 0xFFFFFFFF;
}
- zfcp_fsf_set_data_dir(scsi_cmnd, &io->data_direction);
+ if (zfcp_fsf_set_data_dir(scsi_cmnd, &io->data_direction))
+ goto failed_scsi_cmnd;
fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd, 0);
@@ -2215,18 +2225,22 @@
if (scsi_prot_sg_count(scsi_cmnd)) {
zfcp_qdio_set_data_div(qdio, &req->qdio_req,
scsi_prot_sg_count(scsi_cmnd));
- dix_bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req,
+ retval = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req,
+ scsi_prot_sglist(scsi_cmnd));
+ if (retval)
+ goto failed_scsi_cmnd;
+ io->prot_data_length = zfcp_qdio_real_bytes(
scsi_prot_sglist(scsi_cmnd));
- io->prot_data_length = dix_bytes;
}
- real_bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req,
- scsi_sglist(scsi_cmnd));
-
- if (unlikely(real_bytes < 0) || unlikely(dix_bytes < 0))
+ retval = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req,
+ scsi_sglist(scsi_cmnd));
+ if (unlikely(retval))
goto failed_scsi_cmnd;
zfcp_qdio_set_sbale_last(adapter->qdio, &req->qdio_req);
+ if (zfcp_adapter_multi_buffer_active(adapter))
+ zfcp_qdio_set_scount(qdio, &req->qdio_req);
retval = zfcp_fsf_req_send(req);
if (unlikely(retval))
@@ -2328,7 +2342,7 @@
struct zfcp_qdio *qdio = adapter->qdio;
struct zfcp_fsf_req *req = NULL;
struct fsf_qtcb_bottom_support *bottom;
- int retval = -EIO, bytes;
+ int retval = -EIO;
u8 direction;
if (!(adapter->adapter_features & FSF_FEATURE_CFDC))
@@ -2361,13 +2375,17 @@
bottom->operation_subtype = FSF_CFDC_OPERATION_SUBTYPE;
bottom->option = fsf_cfdc->option;
- bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, fsf_cfdc->sg);
+ retval = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, fsf_cfdc->sg);
- if (bytes != ZFCP_CFDC_MAX_SIZE) {
+ if (retval ||
+ (zfcp_qdio_real_bytes(fsf_cfdc->sg) != ZFCP_CFDC_MAX_SIZE)) {
zfcp_fsf_req_free(req);
+ retval = -EIO;
goto out;
}
- zfcp_qdio_set_sbale_last(adapter->qdio, &req->qdio_req);
+ zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
+ if (zfcp_adapter_multi_buffer_active(adapter))
+ zfcp_qdio_set_scount(qdio, &req->qdio_req);
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index d9c40ea..df9e69f 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -15,6 +15,10 @@
#define QBUFF_PER_PAGE (PAGE_SIZE / sizeof(struct qdio_buffer))
+static bool enable_multibuffer;
+module_param_named(datarouter, enable_multibuffer, bool, 0400);
+MODULE_PARM_DESC(datarouter, "Enable hardware data router support");
+
static int zfcp_qdio_buffers_enqueue(struct qdio_buffer **sbal)
{
int pos;
@@ -37,8 +41,11 @@
dev_warn(&adapter->ccw_device->dev, "A QDIO problem occurred\n");
- if (qdio_err & QDIO_ERROR_SLSB_STATE)
+ if (qdio_err & QDIO_ERROR_SLSB_STATE) {
zfcp_qdio_siosl(adapter);
+ zfcp_erp_adapter_shutdown(adapter, 0, id);
+ return;
+ }
zfcp_erp_adapter_reopen(adapter,
ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
ZFCP_STATUS_COMMON_ERP_FAILED, id);
@@ -93,9 +100,27 @@
unsigned long parm)
{
struct zfcp_qdio *qdio = (struct zfcp_qdio *) parm;
- int sbal_idx, sbal_no;
+ struct zfcp_adapter *adapter = qdio->adapter;
+ struct qdio_buffer_element *sbale;
+ int sbal_no, sbal_idx;
+ void *pl[ZFCP_QDIO_MAX_SBALS_PER_REQ + 1];
+ u64 req_id;
+ u8 scount;
if (unlikely(qdio_err)) {
+ memset(pl, 0, ZFCP_QDIO_MAX_SBALS_PER_REQ * sizeof(void *));
+ if (zfcp_adapter_multi_buffer_active(adapter)) {
+ sbale = qdio->res_q[idx]->element;
+ req_id = (u64) sbale->addr;
+ scount = sbale->scount + 1; /* incl. signaling SBAL */
+
+ for (sbal_no = 0; sbal_no < scount; sbal_no++) {
+ sbal_idx = (idx + sbal_no) %
+ QDIO_MAX_BUFFERS_PER_Q;
+ pl[sbal_no] = qdio->res_q[sbal_idx];
+ }
+ zfcp_dbf_hba_def_err(adapter, req_id, scount, pl);
+ }
zfcp_qdio_handler_error(qdio, "qdires1", qdio_err);
return;
}
@@ -155,7 +180,7 @@
static struct qdio_buffer_element *
zfcp_qdio_sbale_next(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
{
- if (q_req->sbale_curr == ZFCP_QDIO_LAST_SBALE_PER_SBAL)
+ if (q_req->sbale_curr == qdio->max_sbale_per_sbal - 1)
return zfcp_qdio_sbal_chain(qdio, q_req);
q_req->sbale_curr++;
return zfcp_qdio_sbale_curr(qdio, q_req);
@@ -167,13 +192,12 @@
* @q_req: pointer to struct zfcp_qdio_req
* @sg: scatter-gather list
* @max_sbals: upper bound for number of SBALs to be used
- * Returns: number of bytes, or error (negativ)
+ * Returns: zero or -EINVAL on error
*/
int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req,
struct scatterlist *sg)
{
struct qdio_buffer_element *sbale;
- int bytes = 0;
/* set storage-block type for this request */
sbale = zfcp_qdio_sbale_req(qdio, q_req);
@@ -187,14 +211,10 @@
q_req->sbal_number);
return -EINVAL;
}
-
sbale->addr = sg_virt(sg);
sbale->length = sg->length;
-
- bytes += sg->length;
}
-
- return bytes;
+ return 0;
}
static int zfcp_qdio_sbal_check(struct zfcp_qdio *qdio)
@@ -283,6 +303,8 @@
memcpy(id->adapter_name, dev_name(&id->cdev->dev), 8);
ASCEBC(id->adapter_name, 8);
id->qib_rflags = QIB_RFLAGS_ENABLE_DATA_DIV;
+ if (enable_multibuffer)
+ id->qdr_ac |= QDR_AC_MULTI_BUFFER_ENABLE;
id->no_input_qs = 1;
id->no_output_qs = 1;
id->input_handler = zfcp_qdio_int_resp;
@@ -378,6 +400,17 @@
atomic_set_mask(ZFCP_STATUS_ADAPTER_DATA_DIV_ENABLED,
&qdio->adapter->status);
+ if (ssqd.qdioac2 & CHSC_AC2_MULTI_BUFFER_ENABLED) {
+ atomic_set_mask(ZFCP_STATUS_ADAPTER_MB_ACT, &adapter->status);
+ qdio->max_sbale_per_sbal = QDIO_MAX_ELEMENTS_PER_BUFFER;
+ } else {
+ atomic_clear_mask(ZFCP_STATUS_ADAPTER_MB_ACT, &adapter->status);
+ qdio->max_sbale_per_sbal = QDIO_MAX_ELEMENTS_PER_BUFFER - 1;
+ }
+
+ qdio->max_sbale_per_req =
+ ZFCP_QDIO_MAX_SBALS_PER_REQ * qdio->max_sbale_per_sbal
+ - 2;
if (qdio_activate(cdev))
goto failed_qdio;
@@ -397,6 +430,11 @@
atomic_set(&qdio->req_q_free, QDIO_MAX_BUFFERS_PER_Q);
atomic_set_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
+ if (adapter->scsi_host) {
+ adapter->scsi_host->sg_tablesize = qdio->max_sbale_per_req;
+ adapter->scsi_host->max_sectors = qdio->max_sbale_per_req * 8;
+ }
+
return 0;
failed_qdio:
diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h
index 54e22ac..8ac7f53 100644
--- a/drivers/s390/scsi/zfcp_qdio.h
+++ b/drivers/s390/scsi/zfcp_qdio.h
@@ -13,20 +13,9 @@
#define ZFCP_QDIO_SBALE_LEN PAGE_SIZE
-/* DMQ bug workaround: don't use last SBALE */
-#define ZFCP_QDIO_MAX_SBALES_PER_SBAL (QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
-
-/* index of last SBALE (with respect to DMQ bug workaround) */
-#define ZFCP_QDIO_LAST_SBALE_PER_SBAL (ZFCP_QDIO_MAX_SBALES_PER_SBAL - 1)
-
/* Max SBALS for chaining */
#define ZFCP_QDIO_MAX_SBALS_PER_REQ 36
-/* max. number of (data buffer) SBALEs in largest SBAL chain
- * request ID + QTCB in SBALE 0 + 1 of first SBAL in chain */
-#define ZFCP_QDIO_MAX_SBALES_PER_REQ \
- (ZFCP_QDIO_MAX_SBALS_PER_REQ * ZFCP_QDIO_MAX_SBALES_PER_SBAL - 2)
-
/**
* struct zfcp_qdio - basic qdio data structure
* @res_q: response queue
@@ -53,6 +42,8 @@
atomic_t req_q_full;
wait_queue_head_t req_q_wq;
struct zfcp_adapter *adapter;
+ u16 max_sbale_per_sbal;
+ u16 max_sbale_per_req;
};
/**
@@ -155,7 +146,7 @@
{
struct qdio_buffer_element *sbale;
- BUG_ON(q_req->sbale_curr == ZFCP_QDIO_LAST_SBALE_PER_SBAL);
+ BUG_ON(q_req->sbale_curr == qdio->max_sbale_per_sbal - 1);
q_req->sbale_curr++;
sbale = zfcp_qdio_sbale_curr(qdio, q_req);
sbale->addr = data;
@@ -195,9 +186,10 @@
* @q_req: The current zfcp_qdio_req
*/
static inline
-void zfcp_qdio_skip_to_last_sbale(struct zfcp_qdio_req *q_req)
+void zfcp_qdio_skip_to_last_sbale(struct zfcp_qdio *qdio,
+ struct zfcp_qdio_req *q_req)
{
- q_req->sbale_curr = ZFCP_QDIO_LAST_SBALE_PER_SBAL;
+ q_req->sbale_curr = qdio->max_sbale_per_sbal - 1;
}
/**
@@ -228,8 +220,52 @@
{
struct qdio_buffer_element *sbale;
- sbale = &qdio->req_q[q_req->sbal_first]->element[0];
+ sbale = qdio->req_q[q_req->sbal_first]->element;
sbale->length = count;
}
+/**
+ * zfcp_qdio_sbale_count - count sbale used
+ * @sg: pointer to struct scatterlist
+ */
+static inline
+unsigned int zfcp_qdio_sbale_count(struct scatterlist *sg)
+{
+ unsigned int count = 0;
+
+ for (; sg; sg = sg_next(sg))
+ count++;
+
+ return count;
+}
+
+/**
+ * zfcp_qdio_real_bytes - count bytes used
+ * @sg: pointer to struct scatterlist
+ */
+static inline
+unsigned int zfcp_qdio_real_bytes(struct scatterlist *sg)
+{
+ unsigned int real_bytes = 0;
+
+ for (; sg; sg = sg_next(sg))
+ real_bytes += sg->length;
+
+ return real_bytes;
+}
+
+/**
+ * zfcp_qdio_set_scount - set SBAL count value
+ * @qdio: pointer to struct zfcp_qdio
+ * @q_req: The current zfcp_qdio_req
+ */
+static inline
+void zfcp_qdio_set_scount(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req)
+{
+ struct qdio_buffer_element *sbale;
+
+ sbale = qdio->req_q[q_req->sbal_first]->element;
+ sbale->scount = q_req->sbal_number - 1;
+}
+
#endif /* ZFCP_QDIO_H */
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 7cac873..09126a9 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -24,11 +24,8 @@
MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
static bool enable_dif;
-
-#ifdef CONFIG_ZFCP_DIF
-module_param_named(dif, enable_dif, bool, 0600);
+module_param_named(dif, enable_dif, bool, 0400);
MODULE_PARM_DESC(dif, "Enable DIF/DIX data integrity support");
-#endif
static bool allow_lun_scan = 1;
module_param(allow_lun_scan, bool, 0600);
@@ -309,8 +306,8 @@
.proc_name = "zfcp",
.can_queue = 4096,
.this_id = -1,
- .sg_tablesize = ZFCP_QDIO_MAX_SBALES_PER_REQ,
- .max_sectors = (ZFCP_QDIO_MAX_SBALES_PER_REQ * 8),
+ .sg_tablesize = 1, /* adjusted later */
+ .max_sectors = 8, /* adjusted later */
.dma_boundary = ZFCP_QDIO_SBALE_LEN - 1,
.cmd_per_lun = 1,
.use_clustering = 1,
@@ -668,9 +665,9 @@
adapter->adapter_features & FSF_FEATURE_DIX_PROT_TCPIP) {
mask |= SHOST_DIX_TYPE1_PROTECTION;
scsi_host_set_guard(shost, SHOST_DIX_GUARD_IP);
- shost->sg_prot_tablesize = ZFCP_QDIO_MAX_SBALES_PER_REQ / 2;
- shost->sg_tablesize = ZFCP_QDIO_MAX_SBALES_PER_REQ / 2;
- shost->max_sectors = ZFCP_QDIO_MAX_SBALES_PER_REQ * 8 / 2;
+ shost->sg_prot_tablesize = adapter->qdio->max_sbale_per_req / 2;
+ shost->sg_tablesize = adapter->qdio->max_sbale_per_req / 2;
+ shost->max_sectors = shost->sg_tablesize * 8;
}
scsi_host_set_prot(shost, mask);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 3878b73..aa573c3 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -309,6 +309,7 @@
config SCSI_ISCSI_ATTRS
tristate "iSCSI Transport Attributes"
depends on SCSI && NET
+ select BLK_DEV_BSGLIB
help
If you wish to export transport-specific information about
each attached iSCSI device to sysfs, say Y.
@@ -559,6 +560,15 @@
source "drivers/scsi/aic94xx/Kconfig"
source "drivers/scsi/mvsas/Kconfig"
+config SCSI_MVUMI
+ tristate "Marvell UMI driver"
+ depends on SCSI && PCI
+ help
+ Module for Marvell Universal Message Interface(UMI) driver
+
+ To compile this driver as a module, choose M here: the
+ module will be called mvumi.
+
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
depends on SCSI && PCI && VIRT_TO_BUS
@@ -1872,10 +1882,6 @@
called zfcp. If you want to compile it as a module, say M here
and read <file:Documentation/kbuild/modules.txt>.
-config ZFCP_DIF
- tristate "T10 DIF/DIX support for the zfcp driver (EXPERIMENTAL)"
- depends on ZFCP && EXPERIMENTAL
-
config SCSI_PMCRAID
tristate "PMC SIERRA Linux MaxRAID adapter support"
depends on PCI && SCSI && NET
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 6153a66..2b88749 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -134,6 +134,7 @@
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
obj-$(CONFIG_SCSI_STEX) += stex.o
obj-$(CONFIG_SCSI_MVSAS) += mvsas/
+obj-$(CONFIG_SCSI_MVUMI) += mvumi.o
obj-$(CONFIG_PS3_ROM) += ps3rom.o
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3382475..4aa76d6 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -894,16 +894,17 @@
int len = 0;
if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
- len = snprintf(buf, PAGE_SIZE, "%06X\n",
+ len = snprintf(buf, 16, "%06X\n",
le32_to_cpu(dev->adapter_info.serial[0]));
if (len &&
!memcmp(&dev->supplement_adapter_info.MfgPcbaSerialNo[
sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo)-len],
buf, len-1))
- len = snprintf(buf, PAGE_SIZE, "%.*s\n",
+ len = snprintf(buf, 16, "%.*s\n",
(int)sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo),
dev->supplement_adapter_info.MfgPcbaSerialNo);
- return len;
+
+ return min(len, 16);
}
static ssize_t aac_show_max_channel(struct device *device,
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 2959327..fdac7c2 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -906,6 +906,7 @@
switch (func) {
case PHY_FUNC_CLEAR_ERROR_LOG:
+ case PHY_FUNC_GET_EVENTS:
return -ENOSYS;
case PHY_FUNC_SET_LINK_RATE:
rates = arg;
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index b8a82f2..cdb1536 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -660,6 +660,7 @@
spin_lock(&phba->ctrl.mbox_lock);
ctrl = &phba->ctrl;
wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ memset(wrb, 0, sizeof(*wrb));
req = embedded_payload(wrb);
ctxt = &req->context;
@@ -868,3 +869,22 @@
beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL);
return status;
}
+
+int beiscsi_cmd_reset_function(struct beiscsi_hba *phba)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_post_sgl_pages_req *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+
+ req = embedded_payload(wrb);
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
+ status = be_mbox_notify_wait(phba);
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 497eb29..8b40a5b4 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -561,6 +561,8 @@
struct be_dma_mem *q_mem, u32 page_offset,
u32 num_pages);
+int beiscsi_cmd_reset_function(struct beiscsi_hba *phba);
+
int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
struct be_queue_info *wrbq);
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 3cad106..8b002f6 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -177,9 +177,8 @@
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct beiscsi_conn *beiscsi_conn = conn->dd_data;
- struct Scsi_Host *shost =
- (struct Scsi_Host *)iscsi_session_to_shost(cls_session);
- struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct beiscsi_hba *phba = iscsi_host_priv(shost);
struct beiscsi_endpoint *beiscsi_ep;
struct iscsi_endpoint *ep;
@@ -290,7 +289,7 @@
int beiscsi_get_host_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf)
{
- struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
+ struct beiscsi_hba *phba = iscsi_host_priv(shost);
int status = 0;
SE_DEBUG(DBG_LVL_8, "In beiscsi_get_host_param, param= %d\n", param);
@@ -733,3 +732,56 @@
beiscsi_unbind_conn_to_cid(phba, beiscsi_ep->ep_cid);
iscsi_destroy_endpoint(beiscsi_ep->openiscsi_ep);
}
+
+mode_t be2iscsi_attr_is_visible(int param_type, int param)
+{
+ switch (param_type) {
+ case ISCSI_HOST_PARAM:
+ switch (param) {
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ case ISCSI_HOST_PARAM_IPADDRESS:
+ case ISCSI_HOST_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ case ISCSI_PARAM:
+ switch (param) {
+ case ISCSI_PARAM_MAX_RECV_DLENGTH:
+ case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+ case ISCSI_PARAM_HDRDGST_EN:
+ case ISCSI_PARAM_DATADGST_EN:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_EXP_STATSN:
+ case ISCSI_PARAM_PERSISTENT_ADDRESS:
+ case ISCSI_PARAM_PERSISTENT_PORT:
+ case ISCSI_PARAM_PING_TMO:
+ case ISCSI_PARAM_RECV_TMO:
+ case ISCSI_PARAM_INITIAL_R2T_EN:
+ case ISCSI_PARAM_MAX_R2T:
+ case ISCSI_PARAM_IMM_DATA_EN:
+ case ISCSI_PARAM_FIRST_BURST:
+ case ISCSI_PARAM_MAX_BURST:
+ case ISCSI_PARAM_PDU_INORDER_EN:
+ case ISCSI_PARAM_DATASEQ_INORDER_EN:
+ case ISCSI_PARAM_ERL:
+ case ISCSI_PARAM_TARGET_NAME:
+ case ISCSI_PARAM_TPGT:
+ case ISCSI_PARAM_USERNAME:
+ case ISCSI_PARAM_PASSWORD:
+ case ISCSI_PARAM_USERNAME_IN:
+ case ISCSI_PARAM_PASSWORD_IN:
+ case ISCSI_PARAM_FAST_ABORT:
+ case ISCSI_PARAM_ABORT_TMO:
+ case ISCSI_PARAM_LU_RESET_TMO:
+ case ISCSI_PARAM_IFACE_NAME:
+ case ISCSI_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index ff60b7f..4a1f2e3 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -26,6 +26,8 @@
#define BE2_IPV4 0x1
#define BE2_IPV6 0x10
+mode_t be2iscsi_attr_is_visible(int param_type, int param);
+
void beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
struct beiscsi_offload_params *params);
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 0a9bdfa..7b0a8ab 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -822,33 +822,47 @@
struct hwi_controller *phwi_ctrlr;
struct hwi_context_memory *phwi_context;
int ret, msix_vec, i, j;
- char desc[32];
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
if (phba->msix_enabled) {
for (i = 0; i < phba->num_cpus; i++) {
- sprintf(desc, "beiscsi_msix_%04x", i);
+ phba->msi_name[i] = kzalloc(BEISCSI_MSI_NAME,
+ GFP_KERNEL);
+ if (!phba->msi_name[i]) {
+ ret = -ENOMEM;
+ goto free_msix_irqs;
+ }
+
+ sprintf(phba->msi_name[i], "beiscsi_%02x_%02x",
+ phba->shost->host_no, i);
msix_vec = phba->msix_entries[i].vector;
- ret = request_irq(msix_vec, be_isr_msix, 0, desc,
+ ret = request_irq(msix_vec, be_isr_msix, 0,
+ phba->msi_name[i],
&phwi_context->be_eq[i]);
if (ret) {
shost_printk(KERN_ERR, phba->shost,
"beiscsi_init_irqs-Failed to"
"register msix for i = %d\n", i);
- if (!i)
- return ret;
+ kfree(phba->msi_name[i]);
goto free_msix_irqs;
}
}
+ phba->msi_name[i] = kzalloc(BEISCSI_MSI_NAME, GFP_KERNEL);
+ if (!phba->msi_name[i]) {
+ ret = -ENOMEM;
+ goto free_msix_irqs;
+ }
+ sprintf(phba->msi_name[i], "beiscsi_mcc_%02x",
+ phba->shost->host_no);
msix_vec = phba->msix_entries[i].vector;
- ret = request_irq(msix_vec, be_isr_mcc, 0, "beiscsi_msix_mcc",
+ ret = request_irq(msix_vec, be_isr_mcc, 0, phba->msi_name[i],
&phwi_context->be_eq[i]);
if (ret) {
shost_printk(KERN_ERR, phba->shost, "beiscsi_init_irqs-"
"Failed to register beiscsi_msix_mcc\n");
- i++;
+ kfree(phba->msi_name[i]);
goto free_msix_irqs;
}
@@ -863,8 +877,11 @@
}
return 0;
free_msix_irqs:
- for (j = i - 1; j == 0; j++)
+ for (j = i - 1; j >= 0; j--) {
+ kfree(phba->msi_name[j]);
+ msix_vec = phba->msix_entries[j].vector;
free_irq(msix_vec, &phwi_context->be_eq[j]);
+ }
return ret;
}
@@ -1106,7 +1123,12 @@
& SOL_STS_MASK) >> 8);
flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
& SOL_FLAGS_MASK) >> 24) | 0x80;
+ if (!task->sc) {
+ if (io_task->scsi_cmnd)
+ scsi_dma_unmap(io_task->scsi_cmnd);
+ return;
+ }
task->sc->result = (DID_OK << 16) | status;
if (rsp != ISCSI_STATUS_CMD_COMPLETED) {
task->sc->result = DID_ERROR << 16;
@@ -4027,11 +4049,11 @@
TGT_DM_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt,
pwrb, 0);
- AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 1);
} else {
AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
INI_RD_CMD);
- AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 1);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
}
hwi_write_buffer(pwrb, task);
break;
@@ -4102,9 +4124,8 @@
return beiscsi_iotask(task, sg, num_sg, xferlen, writedir);
}
-static void beiscsi_remove(struct pci_dev *pcidev)
+static void beiscsi_quiesce(struct beiscsi_hba *phba)
{
- struct beiscsi_hba *phba = NULL;
struct hwi_controller *phwi_ctrlr;
struct hwi_context_memory *phwi_context;
struct be_eq_obj *pbe_eq;
@@ -4112,12 +4133,6 @@
u8 *real_offset = 0;
u32 value = 0;
- phba = (struct beiscsi_hba *)pci_get_drvdata(pcidev);
- if (!phba) {
- dev_err(&pcidev->dev, "beiscsi_remove called with no phba\n");
- return;
- }
-
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
hwi_disable_intr(phba);
@@ -4125,6 +4140,7 @@
for (i = 0; i <= phba->num_cpus; i++) {
msix_vec = phba->msix_entries[i].vector;
free_irq(msix_vec, &phwi_context->be_eq[i]);
+ kfree(phba->msi_name[i]);
}
} else
if (phba->pcidev->irq)
@@ -4152,10 +4168,40 @@
phba->ctrl.mbox_mem_alloced.size,
phba->ctrl.mbox_mem_alloced.va,
phba->ctrl.mbox_mem_alloced.dma);
+}
+
+static void beiscsi_remove(struct pci_dev *pcidev)
+{
+
+ struct beiscsi_hba *phba = NULL;
+
+ phba = pci_get_drvdata(pcidev);
+ if (!phba) {
+ dev_err(&pcidev->dev, "beiscsi_remove called with no phba\n");
+ return;
+ }
+
+ beiscsi_quiesce(phba);
iscsi_boot_destroy_kset(phba->boot_kset);
iscsi_host_remove(phba->shost);
pci_dev_put(phba->pcidev);
iscsi_host_free(phba->shost);
+ pci_disable_device(pcidev);
+}
+
+static void beiscsi_shutdown(struct pci_dev *pcidev)
+{
+
+ struct beiscsi_hba *phba = NULL;
+
+ phba = (struct beiscsi_hba *)pci_get_drvdata(pcidev);
+ if (!phba) {
+ dev_err(&pcidev->dev, "beiscsi_shutdown called with no phba\n");
+ return;
+ }
+
+ beiscsi_quiesce(phba);
+ pci_disable_device(pcidev);
}
static void beiscsi_msix_enable(struct beiscsi_hba *phba)
@@ -4235,7 +4281,7 @@
gcrashmode++;
shost_printk(KERN_ERR, phba->shost,
"Loading Driver in crashdump mode\n");
- ret = beiscsi_pci_soft_reset(phba);
+ ret = beiscsi_cmd_reset_function(phba);
if (ret) {
shost_printk(KERN_ERR, phba->shost,
"Reset Failed. Aborting Crashdump\n");
@@ -4364,37 +4410,12 @@
.name = DRV_NAME,
.caps = CAP_RECOVERY_L0 | CAP_HDRDGST | CAP_TEXT_NEGO |
CAP_MULTI_R2T | CAP_DATADGST | CAP_DATA_PATH_OFFLOAD,
- .param_mask = ISCSI_MAX_RECV_DLENGTH |
- ISCSI_MAX_XMIT_DLENGTH |
- ISCSI_HDRDGST_EN |
- ISCSI_DATADGST_EN |
- ISCSI_INITIAL_R2T_EN |
- ISCSI_MAX_R2T |
- ISCSI_IMM_DATA_EN |
- ISCSI_FIRST_BURST |
- ISCSI_MAX_BURST |
- ISCSI_PDU_INORDER_EN |
- ISCSI_DATASEQ_INORDER_EN |
- ISCSI_ERL |
- ISCSI_CONN_PORT |
- ISCSI_CONN_ADDRESS |
- ISCSI_EXP_STATSN |
- ISCSI_PERSISTENT_PORT |
- ISCSI_PERSISTENT_ADDRESS |
- ISCSI_TARGET_NAME | ISCSI_TPGT |
- ISCSI_USERNAME | ISCSI_PASSWORD |
- ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
- ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO |
- ISCSI_PING_TMO | ISCSI_RECV_TMO |
- ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
- .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
- ISCSI_HOST_INITIATOR_NAME,
.create_session = beiscsi_session_create,
.destroy_session = beiscsi_session_destroy,
.create_conn = beiscsi_conn_create,
.bind_conn = beiscsi_conn_bind,
.destroy_conn = iscsi_conn_teardown,
+ .attr_is_visible = be2iscsi_attr_is_visible,
.set_param = beiscsi_set_param,
.get_conn_param = iscsi_conn_get_param,
.get_session_param = iscsi_session_get_param,
@@ -4418,6 +4439,7 @@
.name = DRV_NAME,
.probe = beiscsi_dev_probe,
.remove = beiscsi_remove,
+ .shutdown = beiscsi_shutdown,
.id_table = beiscsi_pci_id_table
};
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 5ce5170..b4a06d5 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -34,7 +34,7 @@
#include "be.h"
#define DRV_NAME "be2iscsi"
-#define BUILD_STR "2.103.298.0"
+#define BUILD_STR "4.1.239.0"
#define BE_NAME "ServerEngines BladeEngine2" \
"Linux iSCSI Driver version" BUILD_STR
#define DRV_DESC BE_NAME " " "Driver"
@@ -162,6 +162,8 @@
#define PAGES_REQUIRED(x) \
((x < PAGE_SIZE) ? 1 : ((x + PAGE_SIZE - 1) / PAGE_SIZE))
+#define BEISCSI_MSI_NAME 20 /* size of msi_name string */
+
enum be_mem_enum {
HWI_MEM_ADDN_CONTEXT,
HWI_MEM_WRB,
@@ -287,6 +289,7 @@
unsigned int num_cpus;
unsigned int nxt_cqid;
struct msix_entry msix_entries[MAX_CPUS + 1];
+ char *msi_name[MAX_CPUS + 1];
bool msix_enabled;
struct be_mem_descriptor *init_mem;
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index dd335a2..63de1c7 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -62,7 +62,7 @@
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
-#define BNX2FC_VERSION "1.0.4"
+#define BNX2FC_VERSION "1.0.8"
#define PFX "bnx2fc: "
@@ -224,6 +224,7 @@
struct fcoe_ctlr ctlr;
u8 vlan_enabled;
int vlan_id;
+ bool enabled;
};
#define bnx2fc_from_ctlr(fip) container_of(fip, struct bnx2fc_interface, ctlr)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index d66dcbd..fd382fe 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -391,18 +391,6 @@
BNX2FC_IO_DBG(rec_req, "rec_compl: orig xid = 0x%x", orig_io_req->xid);
tgt = orig_io_req->tgt;
- if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(rec_req, "completed"
- "orig_io - 0x%x\n",
- orig_io_req->xid);
- goto rec_compl_done;
- }
- if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(rec_req, "abts in prog "
- "orig_io - 0x%x\n",
- orig_io_req->xid);
- goto rec_compl_done;
- }
/* Handle REC timeout case */
if (test_and_clear_bit(BNX2FC_FLAG_ELS_TIMEOUT, &rec_req->req_flags)) {
BNX2FC_IO_DBG(rec_req, "timed out, abort "
@@ -433,6 +421,20 @@
}
goto rec_compl_done;
}
+
+ if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(rec_req, "completed"
+ "orig_io - 0x%x\n",
+ orig_io_req->xid);
+ goto rec_compl_done;
+ }
+ if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(rec_req, "abts in prog "
+ "orig_io - 0x%x\n",
+ orig_io_req->xid);
+ goto rec_compl_done;
+ }
+
mp_req = &(rec_req->mp_req);
fc_hdr = &(mp_req->resp_fc_hdr);
resp_len = mp_req->resp_len;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 820a184..85bcc4b 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -22,7 +22,7 @@
#define DRV_MODULE_NAME "bnx2fc"
#define DRV_MODULE_VERSION BNX2FC_VERSION
-#define DRV_MODULE_RELDATE "Jun 23, 2011"
+#define DRV_MODULE_RELDATE "Oct 02, 2011"
static char version[] __devinitdata =
@@ -56,6 +56,7 @@
static struct fc_function_template bnx2fc_transport_function;
static struct fc_function_template bnx2fc_vport_xport_function;
static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode);
+static void __bnx2fc_destroy(struct bnx2fc_interface *interface);
static int bnx2fc_destroy(struct net_device *net_device);
static int bnx2fc_enable(struct net_device *netdev);
static int bnx2fc_disable(struct net_device *netdev);
@@ -64,7 +65,6 @@
static void bnx2fc_start_disc(struct bnx2fc_interface *interface);
static int bnx2fc_shost_config(struct fc_lport *lport, struct device *dev);
-static int bnx2fc_net_config(struct fc_lport *lp);
static int bnx2fc_lport_config(struct fc_lport *lport);
static int bnx2fc_em_config(struct fc_lport *lport);
static int bnx2fc_bind_adapter_devices(struct bnx2fc_hba *hba);
@@ -78,6 +78,7 @@
static struct bnx2fc_hba *bnx2fc_hba_lookup(struct net_device *phys_dev);
static struct bnx2fc_interface *bnx2fc_interface_lookup(struct net_device
*phys_dev);
+static inline void bnx2fc_interface_put(struct bnx2fc_interface *interface);
static struct bnx2fc_hba *bnx2fc_find_hba_for_cnic(struct cnic_dev *cnic);
static int bnx2fc_fw_init(struct bnx2fc_hba *hba);
@@ -98,6 +99,25 @@
.notifier_call = bnx2fc_cpu_callback,
};
+static inline struct net_device *bnx2fc_netdev(const struct fc_lport *lport)
+{
+ return ((struct bnx2fc_interface *)
+ ((struct fcoe_port *)lport_priv(lport))->priv)->netdev;
+}
+
+/**
+ * bnx2fc_get_lesb() - Fill the FCoE Link Error Status Block
+ * @lport: the local port
+ * @fc_lesb: the link error status block
+ */
+static void bnx2fc_get_lesb(struct fc_lport *lport,
+ struct fc_els_lesb *fc_lesb)
+{
+ struct net_device *netdev = bnx2fc_netdev(lport);
+
+ __fcoe_get_lesb(lport, fc_lesb, netdev);
+}
+
static void bnx2fc_clean_rx_queue(struct fc_lport *lp)
{
struct fcoe_percpu_s *bg;
@@ -545,6 +565,14 @@
break;
}
}
+
+ if (fh->fh_r_ctl == FC_RCTL_BA_ABTS) {
+ /* Drop incoming ABTS */
+ put_cpu();
+ kfree_skb(skb);
+ return;
+ }
+
if (le32_to_cpu(fr_crc(fp)) !=
~crc32(~0, skb->data, fr_len)) {
if (stats->InvalidCRCCount < 5)
@@ -727,7 +755,7 @@
clear_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
}
-static int bnx2fc_net_config(struct fc_lport *lport)
+static int bnx2fc_net_config(struct fc_lport *lport, struct net_device *netdev)
{
struct bnx2fc_hba *hba;
struct bnx2fc_interface *interface;
@@ -753,11 +781,16 @@
bnx2fc_link_speed_update(lport);
if (!lport->vport) {
- wwnn = fcoe_wwn_from_mac(interface->ctlr.ctl_src_addr, 1, 0);
+ if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN))
+ wwnn = fcoe_wwn_from_mac(interface->ctlr.ctl_src_addr,
+ 1, 0);
BNX2FC_HBA_DBG(lport, "WWNN = 0x%llx\n", wwnn);
fc_set_wwnn(lport, wwnn);
- wwpn = fcoe_wwn_from_mac(interface->ctlr.ctl_src_addr, 2, 0);
+ if (fcoe_get_wwn(netdev, &wwpn, NETDEV_FCOE_WWPN))
+ wwpn = fcoe_wwn_from_mac(interface->ctlr.ctl_src_addr,
+ 2, 0);
+
BNX2FC_HBA_DBG(lport, "WWPN = 0x%llx\n", wwpn);
fc_set_wwpn(lport, wwpn);
}
@@ -769,8 +802,8 @@
{
struct bnx2fc_hba *hba = (struct bnx2fc_hba *)data;
- BNX2FC_MISC_DBG("ERROR:bnx2fc_destroy_timer - "
- "Destroy compl not received!!\n");
+ printk(KERN_ERR PFX "ERROR:bnx2fc_destroy_timer - "
+ "Destroy compl not received!!\n");
set_bit(BNX2FC_FLAG_DESTROY_CMPL, &hba->flags);
wake_up_interruptible(&hba->destroy_wait);
}
@@ -783,7 +816,7 @@
* @vlan_id: vlan id - associated vlan id with this event
*
* Handles NETDEV_UP, NETDEV_DOWN, NETDEV_GOING_DOWN,NETDEV_CHANGE and
- * NETDEV_CHANGE_MTU events
+ * NETDEV_CHANGE_MTU events. Handle NETDEV_UNREGISTER only for vlans.
*/
static void bnx2fc_indicate_netevent(void *context, unsigned long event,
u16 vlan_id)
@@ -791,12 +824,11 @@
struct bnx2fc_hba *hba = (struct bnx2fc_hba *)context;
struct fc_lport *lport;
struct fc_lport *vport;
- struct bnx2fc_interface *interface;
+ struct bnx2fc_interface *interface, *tmp;
int wait_for_upload = 0;
u32 link_possible = 1;
- /* Ignore vlans for now */
- if (vlan_id != 0)
+ if (vlan_id != 0 && event != NETDEV_UNREGISTER)
return;
switch (event) {
@@ -820,6 +852,18 @@
case NETDEV_CHANGE:
break;
+ case NETDEV_UNREGISTER:
+ if (!vlan_id)
+ return;
+ mutex_lock(&bnx2fc_dev_lock);
+ list_for_each_entry_safe(interface, tmp, &if_list, list) {
+ if (interface->hba == hba &&
+ interface->vlan_id == (vlan_id & VLAN_VID_MASK))
+ __bnx2fc_destroy(interface);
+ }
+ mutex_unlock(&bnx2fc_dev_lock);
+ return;
+
default:
printk(KERN_ERR PFX "Unkonwn netevent %ld", event);
return;
@@ -838,8 +882,15 @@
bnx2fc_link_speed_update(lport);
if (link_possible && !bnx2fc_link_ok(lport)) {
- printk(KERN_ERR "indicate_netevent: ctlr_link_up\n");
- fcoe_ctlr_link_up(&interface->ctlr);
+ /* Reset max recv frame size to default */
+ fc_set_mfs(lport, BNX2FC_MFS);
+ /*
+ * ctlr link up will only be handled during
+ * enable to avoid sending discovery solicitation
+ * on a stale vlan
+ */
+ if (interface->enabled)
+ fcoe_ctlr_link_up(&interface->ctlr);
} else if (fcoe_ctlr_link_down(&interface->ctlr)) {
mutex_lock(&lport->lp_mutex);
list_for_each_entry(vport, &lport->vports, list)
@@ -995,6 +1046,17 @@
struct bnx2fc_interface *interface = port->priv;
struct net_device *netdev = interface->netdev;
struct fc_lport *vn_port;
+ int rc;
+ char buf[32];
+
+ rc = fcoe_validate_vport_create(vport);
+ if (rc) {
+ fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf));
+ printk(KERN_ERR PFX "Failed to create vport, "
+ "WWPN (0x%s) already exists\n",
+ buf);
+ return rc;
+ }
if (!test_bit(BNX2FC_FLAG_FW_INIT_DONE, &interface->hba->flags)) {
printk(KERN_ERR PFX "vn ports cannot be created on"
@@ -1024,16 +1086,46 @@
return 0;
}
+static void bnx2fc_free_vport(struct bnx2fc_hba *hba, struct fc_lport *lport)
+{
+ struct bnx2fc_lport *blport, *tmp;
+
+ spin_lock_bh(&hba->hba_lock);
+ list_for_each_entry_safe(blport, tmp, &hba->vports, list) {
+ if (blport->lport == lport) {
+ list_del(&blport->list);
+ kfree(blport);
+ }
+ }
+ spin_unlock_bh(&hba->hba_lock);
+}
+
static int bnx2fc_vport_destroy(struct fc_vport *vport)
{
struct Scsi_Host *shost = vport_to_shost(vport);
struct fc_lport *n_port = shost_priv(shost);
struct fc_lport *vn_port = vport->dd_data;
struct fcoe_port *port = lport_priv(vn_port);
+ struct bnx2fc_interface *interface = port->priv;
+ struct fc_lport *v_port;
+ bool found = false;
mutex_lock(&n_port->lp_mutex);
+ list_for_each_entry(v_port, &n_port->vports, list)
+ if (v_port->vport == vport) {
+ found = true;
+ break;
+ }
+
+ if (!found) {
+ mutex_unlock(&n_port->lp_mutex);
+ return -ENOENT;
+ }
list_del(&vn_port->list);
mutex_unlock(&n_port->lp_mutex);
+ bnx2fc_free_vport(interface->hba, port->lport);
+ bnx2fc_port_shutdown(port->lport);
+ bnx2fc_interface_put(interface);
queue_work(bnx2fc_wq, &port->destroy_work);
return 0;
}
@@ -1054,7 +1146,7 @@
}
-static int bnx2fc_netdev_setup(struct bnx2fc_interface *interface)
+static int bnx2fc_interface_setup(struct bnx2fc_interface *interface)
{
struct net_device *netdev = interface->netdev;
struct net_device *physdev = interface->hba->phys_dev;
@@ -1252,7 +1344,7 @@
interface->ctlr.get_src_addr = bnx2fc_get_src_mac;
set_bit(BNX2FC_CTLR_INIT_DONE, &interface->if_flags);
- rc = bnx2fc_netdev_setup(interface);
+ rc = bnx2fc_interface_setup(interface);
if (!rc)
return interface;
@@ -1318,7 +1410,7 @@
fc_set_wwpn(lport, vport->port_name);
}
/* Configure netdev and networking properties of the lport */
- rc = bnx2fc_net_config(lport);
+ rc = bnx2fc_net_config(lport, interface->netdev);
if (rc) {
printk(KERN_ERR PFX "Error on bnx2fc_net_config\n");
goto lp_config_err;
@@ -1372,7 +1464,7 @@
return NULL;
}
-static void bnx2fc_netdev_cleanup(struct bnx2fc_interface *interface)
+static void bnx2fc_net_cleanup(struct bnx2fc_interface *interface)
{
/* Dont listen for Ethernet packets anymore */
__dev_remove_pack(&interface->fcoe_packet_type);
@@ -1380,10 +1472,11 @@
synchronize_net();
}
-static void bnx2fc_if_destroy(struct fc_lport *lport, struct bnx2fc_hba *hba)
+static void bnx2fc_interface_cleanup(struct bnx2fc_interface *interface)
{
+ struct fc_lport *lport = interface->ctlr.lp;
struct fcoe_port *port = lport_priv(lport);
- struct bnx2fc_lport *blport, *tmp;
+ struct bnx2fc_hba *hba = interface->hba;
/* Stop the transmit retry timer */
del_timer_sync(&port->timer);
@@ -1391,6 +1484,14 @@
/* Free existing transmit skbs */
fcoe_clean_pending_queue(lport);
+ bnx2fc_net_cleanup(interface);
+
+ bnx2fc_free_vport(hba, lport);
+}
+
+static void bnx2fc_if_destroy(struct fc_lport *lport)
+{
+
/* Free queued packets for the receive thread */
bnx2fc_clean_rx_queue(lport);
@@ -1407,19 +1508,22 @@
/* Free memory used by statistical counters */
fc_lport_free_stats(lport);
- spin_lock_bh(&hba->hba_lock);
- list_for_each_entry_safe(blport, tmp, &hba->vports, list) {
- if (blport->lport == lport) {
- list_del(&blport->list);
- kfree(blport);
- }
- }
- spin_unlock_bh(&hba->hba_lock);
-
/* Release Scsi_Host */
scsi_host_put(lport->host);
}
+static void __bnx2fc_destroy(struct bnx2fc_interface *interface)
+{
+ struct fc_lport *lport = interface->ctlr.lp;
+ struct fcoe_port *port = lport_priv(lport);
+
+ bnx2fc_interface_cleanup(interface);
+ bnx2fc_stop(interface);
+ list_del(&interface->list);
+ bnx2fc_interface_put(interface);
+ queue_work(bnx2fc_wq, &port->destroy_work);
+}
+
/**
* bnx2fc_destroy - Destroy a bnx2fc FCoE interface
*
@@ -1433,8 +1537,6 @@
static int bnx2fc_destroy(struct net_device *netdev)
{
struct bnx2fc_interface *interface = NULL;
- struct bnx2fc_hba *hba;
- struct fc_lport *lport;
int rc = 0;
rtnl_lock();
@@ -1447,15 +1549,9 @@
goto netdev_err;
}
- hba = interface->hba;
- bnx2fc_netdev_cleanup(interface);
- lport = interface->ctlr.lp;
- bnx2fc_stop(interface);
- list_del(&interface->list);
destroy_workqueue(interface->timer_work_queue);
- bnx2fc_interface_put(interface);
- bnx2fc_if_destroy(lport, hba);
+ __bnx2fc_destroy(interface);
netdev_err:
mutex_unlock(&bnx2fc_dev_lock);
@@ -1467,22 +1563,13 @@
{
struct fcoe_port *port;
struct fc_lport *lport;
- struct bnx2fc_interface *interface;
- struct bnx2fc_hba *hba;
port = container_of(work, struct fcoe_port, destroy_work);
lport = port->lport;
- interface = port->priv;
- hba = interface->hba;
BNX2FC_HBA_DBG(lport, "Entered bnx2fc_destroy_work\n");
- bnx2fc_port_shutdown(lport);
- rtnl_lock();
- mutex_lock(&bnx2fc_dev_lock);
- bnx2fc_if_destroy(lport, hba);
- mutex_unlock(&bnx2fc_dev_lock);
- rtnl_unlock();
+ bnx2fc_if_destroy(lport);
}
static void bnx2fc_unbind_adapter_devices(struct bnx2fc_hba *hba)
@@ -1661,6 +1748,7 @@
wait_event_interruptible(hba->destroy_wait,
test_bit(BNX2FC_FLAG_DESTROY_CMPL,
&hba->flags));
+ clear_bit(BNX2FC_FLAG_DESTROY_CMPL, &hba->flags);
/* This should never happen */
if (signal_pending(current))
flush_signals(current);
@@ -1723,7 +1811,7 @@
lport = interface->ctlr.lp;
BNX2FC_HBA_DBG(lport, "calling fc_fabric_login\n");
- if (!bnx2fc_link_ok(lport)) {
+ if (!bnx2fc_link_ok(lport) && interface->enabled) {
BNX2FC_HBA_DBG(lport, "ctlr_link_up\n");
fcoe_ctlr_link_up(&interface->ctlr);
fc_host_port_type(lport->host) = FC_PORTTYPE_NPORT;
@@ -1737,6 +1825,11 @@
if (++wait_cnt > 12)
break;
}
+
+ /* Reset max receive frame size to default */
+ if (fc_set_mfs(lport, BNX2FC_MFS))
+ return;
+
fc_lport_init(lport);
fc_fabric_login(lport);
}
@@ -1800,6 +1893,7 @@
rc = -ENODEV;
printk(KERN_ERR PFX "bnx2fc_disable: interface or lport not found\n");
} else {
+ interface->enabled = false;
fcoe_ctlr_link_down(&interface->ctlr);
fcoe_clean_pending_queue(interface->ctlr.lp);
}
@@ -1822,8 +1916,10 @@
if (!interface || !interface->ctlr.lp) {
rc = -ENODEV;
printk(KERN_ERR PFX "bnx2fc_enable: interface or lport not found\n");
- } else if (!bnx2fc_link_ok(interface->ctlr.lp))
+ } else if (!bnx2fc_link_ok(interface->ctlr.lp)) {
fcoe_ctlr_link_up(&interface->ctlr);
+ interface->enabled = true;
+ }
mutex_unlock(&bnx2fc_dev_lock);
rtnl_unlock();
@@ -1923,7 +2019,6 @@
if (!lport) {
printk(KERN_ERR PFX "Failed to create interface (%s)\n",
netdev->name);
- bnx2fc_netdev_cleanup(interface);
rc = -EINVAL;
goto if_create_err;
}
@@ -1936,8 +2031,15 @@
/* Make this master N_port */
interface->ctlr.lp = lport;
+ if (!bnx2fc_link_ok(lport)) {
+ fcoe_ctlr_link_up(&interface->ctlr);
+ fc_host_port_type(lport->host) = FC_PORTTYPE_NPORT;
+ set_bit(ADAPTER_STATE_READY, &interface->hba->adapter_state);
+ }
+
BNX2FC_HBA_DBG(lport, "create: START DISC\n");
bnx2fc_start_disc(interface);
+ interface->enabled = true;
/*
* Release from kref_init in bnx2fc_interface_setup, on success
* lport should be holding a reference taken in bnx2fc_if_create
@@ -1951,6 +2053,7 @@
if_create_err:
destroy_workqueue(interface->timer_work_queue);
ifput_err:
+ bnx2fc_net_cleanup(interface);
bnx2fc_interface_put(interface);
netdev_err:
module_put(THIS_MODULE);
@@ -2017,7 +2120,6 @@
{
struct bnx2fc_hba *hba;
struct bnx2fc_interface *interface, *tmp;
- struct fc_lport *lport;
BNX2FC_MISC_DBG("Entered bnx2fc_ulp_exit\n");
@@ -2039,18 +2141,10 @@
list_del_init(&hba->list);
adapter_count--;
- list_for_each_entry_safe(interface, tmp, &if_list, list) {
+ list_for_each_entry_safe(interface, tmp, &if_list, list)
/* destroy not called yet, move to quiesced list */
- if (interface->hba == hba) {
- bnx2fc_netdev_cleanup(interface);
- bnx2fc_stop(interface);
-
- list_del(&interface->list);
- lport = interface->ctlr.lp;
- bnx2fc_interface_put(interface);
- bnx2fc_if_destroy(lport, hba);
- }
- }
+ if (interface->hba == hba)
+ __bnx2fc_destroy(interface);
mutex_unlock(&bnx2fc_dev_lock);
bnx2fc_ulp_stop(hba);
@@ -2119,7 +2213,7 @@
(void *)p,
"bnx2fc_thread/%d", cpu);
/* bind thread to the cpu */
- if (likely(!IS_ERR(p->iothread))) {
+ if (likely(!IS_ERR(thread))) {
kthread_bind(thread, cpu);
p->iothread = thread;
wake_up_process(thread);
@@ -2131,7 +2225,6 @@
struct bnx2fc_percpu_s *p;
struct task_struct *thread;
struct bnx2fc_work *work, *tmp;
- LIST_HEAD(work_list);
BNX2FC_MISC_DBG("destroying io thread for CPU %d\n", cpu);
@@ -2143,7 +2236,7 @@
/* Free all work in the list */
- list_for_each_entry_safe(work, tmp, &work_list, list) {
+ list_for_each_entry_safe(work, tmp, &p->work_list, list) {
list_del_init(&work->list);
bnx2fc_process_cq_compl(work->tgt, work->wqe);
kfree(work);
@@ -2376,6 +2469,7 @@
.vport_create = bnx2fc_vport_create,
.vport_delete = bnx2fc_vport_destroy,
.vport_disable = bnx2fc_vport_disable,
+ .bsg_request = fc_lport_bsg_request,
};
static struct fc_function_template bnx2fc_vport_xport_function = {
@@ -2409,6 +2503,7 @@
.get_fc_host_stats = fc_get_host_stats,
.issue_fc_host_lip = bnx2fc_fcoe_reset,
.terminate_rport_io = fc_rport_terminate_io,
+ .bsg_request = fc_lport_bsg_request,
};
/**
@@ -2438,6 +2533,7 @@
.elsct_send = bnx2fc_elsct_send,
.fcp_abort_io = bnx2fc_abort_io,
.fcp_cleanup = bnx2fc_cleanup,
+ .get_lesb = bnx2fc_get_lesb,
.rport_event_callback = bnx2fc_rport_event_handler,
};
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 72cfb14..1923a25 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -1009,6 +1009,7 @@
u32 cq_cons;
struct fcoe_cqe *cqe;
u32 num_free_sqes = 0;
+ u32 num_cqes = 0;
u16 wqe;
/*
@@ -1058,10 +1059,11 @@
wake_up_process(fps->iothread);
else
bnx2fc_process_cq_compl(tgt, wqe);
+ num_free_sqes++;
}
cqe++;
tgt->cq_cons_idx++;
- num_free_sqes++;
+ num_cqes++;
if (tgt->cq_cons_idx == BNX2FC_CQ_WQES_MAX) {
tgt->cq_cons_idx = 0;
@@ -1070,8 +1072,10 @@
1 - tgt->cq_curr_toggle_bit;
}
}
- if (num_free_sqes) {
- bnx2fc_arm_cq(tgt);
+ if (num_cqes) {
+ /* Arm CQ only if doorbell is mapped */
+ if (tgt->ctx_base)
+ bnx2fc_arm_cq(tgt);
atomic_add(num_free_sqes, &tgt->free_sqes);
}
spin_unlock_bh(&tgt->cq_lock);
@@ -1739,11 +1743,13 @@
/* Init state to NORMAL */
task->txwr_rxrd.const_ctx.init_flags |= task_type <<
FCOE_TCE_TX_WR_RX_RD_CONST_TASK_TYPE_SHIFT;
- if (dev_type == TYPE_TAPE)
+ if (dev_type == TYPE_TAPE) {
task->txwr_rxrd.const_ctx.init_flags |=
FCOE_TASK_DEV_TYPE_TAPE <<
FCOE_TCE_TX_WR_RX_RD_CONST_DEV_TYPE_SHIFT;
- else
+ io_req->rec_retry = 0;
+ io_req->rec_retry = 0;
+ } else
task->txwr_rxrd.const_ctx.init_flags |=
FCOE_TASK_DEV_TYPE_DISK <<
FCOE_TCE_TX_WR_RX_RD_CONST_DEV_TYPE_SHIFT;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 6cc3789..0c64d18 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -17,7 +17,7 @@
static int bnx2fc_split_bd(struct bnx2fc_cmd *io_req, u64 addr, int sg_len,
int bd_index);
static int bnx2fc_map_sg(struct bnx2fc_cmd *io_req);
-static void bnx2fc_build_bd_list_from_sg(struct bnx2fc_cmd *io_req);
+static int bnx2fc_build_bd_list_from_sg(struct bnx2fc_cmd *io_req);
static void bnx2fc_unmap_sg_list(struct bnx2fc_cmd *io_req);
static void bnx2fc_free_mp_resc(struct bnx2fc_cmd *io_req);
static void bnx2fc_parse_fcp_rsp(struct bnx2fc_cmd *io_req,
@@ -1251,7 +1251,6 @@
seq_clnp_req->xid);
goto free_cb_arg;
}
- kref_get(&orig_io_req->refcount);
spin_unlock_bh(&tgt->tgt_lock);
rc = bnx2fc_send_srr(orig_io_req, offset, r_ctl);
@@ -1569,6 +1568,8 @@
static int bnx2fc_map_sg(struct bnx2fc_cmd *io_req)
{
+ struct bnx2fc_interface *interface = io_req->port->priv;
+ struct bnx2fc_hba *hba = interface->hba;
struct scsi_cmnd *sc = io_req->sc_cmd;
struct fcoe_bd_ctx *bd = io_req->bd_tbl->bd_tbl;
struct scatterlist *sg;
@@ -1580,7 +1581,8 @@
u64 addr;
int i;
- sg_count = scsi_dma_map(sc);
+ sg_count = dma_map_sg(&hba->pcidev->dev, scsi_sglist(sc),
+ scsi_sg_count(sc), sc->sc_data_direction);
scsi_for_each_sg(sc, sg, sg_count, i) {
sg_len = sg_dma_len(sg);
addr = sg_dma_address(sg);
@@ -1605,20 +1607,24 @@
return bd_count;
}
-static void bnx2fc_build_bd_list_from_sg(struct bnx2fc_cmd *io_req)
+static int bnx2fc_build_bd_list_from_sg(struct bnx2fc_cmd *io_req)
{
struct scsi_cmnd *sc = io_req->sc_cmd;
struct fcoe_bd_ctx *bd = io_req->bd_tbl->bd_tbl;
int bd_count;
- if (scsi_sg_count(sc))
+ if (scsi_sg_count(sc)) {
bd_count = bnx2fc_map_sg(io_req);
- else {
+ if (bd_count == 0)
+ return -ENOMEM;
+ } else {
bd_count = 0;
bd[0].buf_addr_lo = bd[0].buf_addr_hi = 0;
bd[0].buf_len = bd[0].flags = 0;
}
io_req->bd_tbl->bd_valid = bd_count;
+
+ return 0;
}
static void bnx2fc_unmap_sg_list(struct bnx2fc_cmd *io_req)
@@ -1790,12 +1796,6 @@
tgt = (struct bnx2fc_rport *)&rp[1];
if (!test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags)) {
- if (test_bit(BNX2FC_FLAG_UPLD_REQ_COMPL, &tgt->flags)) {
- sc_cmd->result = DID_NO_CONNECT << 16;
- sc_cmd->scsi_done(sc_cmd);
- return 0;
-
- }
/*
* Session is not offloaded yet. Let SCSI-ml retry
* the command.
@@ -1946,7 +1946,13 @@
xid = io_req->xid;
/* Build buffer descriptor list for firmware from sg list */
- bnx2fc_build_bd_list_from_sg(io_req);
+ if (bnx2fc_build_bd_list_from_sg(io_req)) {
+ printk(KERN_ERR PFX "BD list creation failed\n");
+ spin_lock_bh(&tgt->tgt_lock);
+ kref_put(&io_req->refcount, bnx2fc_cmd_release);
+ spin_unlock_bh(&tgt->tgt_lock);
+ return -EAGAIN;
+ }
task_idx = xid / BNX2FC_TASKS_PER_PAGE;
index = xid % BNX2FC_TASKS_PER_PAGE;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index d5311b5..c1800b5 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -76,7 +76,7 @@
if (rval) {
printk(KERN_ERR PFX "Failed to allocate conn id for "
"port_id (%6x)\n", rport->port_id);
- goto ofld_err;
+ goto tgt_init_err;
}
/* Allocate session resources */
@@ -134,18 +134,17 @@
/* upload will take care of cleaning up sess resc */
lport->tt.rport_logoff(rdata);
}
- /* Arm CQ */
- bnx2fc_arm_cq(tgt);
return;
ofld_err:
/* couldn't offload the session. log off from this rport */
BNX2FC_TGT_DBG(tgt, "bnx2fc_offload_session - offload error\n");
- lport->tt.rport_logoff(rdata);
/* Free session resources */
bnx2fc_free_session_resc(hba, tgt);
+tgt_init_err:
if (tgt->fcoe_conn_id != -1)
bnx2fc_free_conn_id(hba, tgt->fcoe_conn_id);
+ lport->tt.rport_logoff(rdata);
}
void bnx2fc_flush_active_ios(struct bnx2fc_rport *tgt)
@@ -624,7 +623,6 @@
/* called with hba mutex held */
spin_lock_bh(&hba->hba_lock);
hba->tgt_ofld_list[conn_id] = NULL;
- hba->next_conn_id = conn_id;
spin_unlock_bh(&hba->hba_lock);
}
@@ -791,8 +789,6 @@
return 0;
mem_alloc_failure:
- bnx2fc_free_session_resc(hba, tgt);
- bnx2fc_free_conn_id(hba, tgt->fcoe_conn_id);
return -ENOMEM;
}
@@ -807,14 +803,14 @@
static void bnx2fc_free_session_resc(struct bnx2fc_hba *hba,
struct bnx2fc_rport *tgt)
{
+ void __iomem *ctx_base_ptr;
+
BNX2FC_TGT_DBG(tgt, "Freeing up session resources\n");
- if (tgt->ctx_base) {
- iounmap(tgt->ctx_base);
- tgt->ctx_base = NULL;
- }
-
spin_lock_bh(&tgt->cq_lock);
+ ctx_base_ptr = tgt->ctx_base;
+ tgt->ctx_base = NULL;
+
/* Free LCQ */
if (tgt->lcq) {
dma_free_coherent(&hba->pcidev->dev, tgt->lcq_mem_size,
@@ -868,4 +864,7 @@
tgt->sq = NULL;
}
spin_unlock_bh(&tgt->cq_lock);
+
+ if (ctx_base_ptr)
+ iounmap(ctx_base_ptr);
}
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index cffd4d7..d1e6971 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -2177,6 +2177,59 @@
return 0;
}
+static mode_t bnx2i_attr_is_visible(int param_type, int param)
+{
+ switch (param_type) {
+ case ISCSI_HOST_PARAM:
+ switch (param) {
+ case ISCSI_HOST_PARAM_NETDEV_NAME:
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ case ISCSI_HOST_PARAM_IPADDRESS:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ case ISCSI_PARAM:
+ switch (param) {
+ case ISCSI_PARAM_MAX_RECV_DLENGTH:
+ case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+ case ISCSI_PARAM_HDRDGST_EN:
+ case ISCSI_PARAM_DATADGST_EN:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_EXP_STATSN:
+ case ISCSI_PARAM_PERSISTENT_ADDRESS:
+ case ISCSI_PARAM_PERSISTENT_PORT:
+ case ISCSI_PARAM_PING_TMO:
+ case ISCSI_PARAM_RECV_TMO:
+ case ISCSI_PARAM_INITIAL_R2T_EN:
+ case ISCSI_PARAM_MAX_R2T:
+ case ISCSI_PARAM_IMM_DATA_EN:
+ case ISCSI_PARAM_FIRST_BURST:
+ case ISCSI_PARAM_MAX_BURST:
+ case ISCSI_PARAM_PDU_INORDER_EN:
+ case ISCSI_PARAM_DATASEQ_INORDER_EN:
+ case ISCSI_PARAM_ERL:
+ case ISCSI_PARAM_TARGET_NAME:
+ case ISCSI_PARAM_TPGT:
+ case ISCSI_PARAM_USERNAME:
+ case ISCSI_PARAM_PASSWORD:
+ case ISCSI_PARAM_USERNAME_IN:
+ case ISCSI_PARAM_PASSWORD_IN:
+ case ISCSI_PARAM_FAST_ABORT:
+ case ISCSI_PARAM_ABORT_TMO:
+ case ISCSI_PARAM_LU_RESET_TMO:
+ case ISCSI_PARAM_TGT_RESET_TMO:
+ case ISCSI_PARAM_IFACE_NAME:
+ case ISCSI_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ }
+
+ return 0;
+}
/*
* 'Scsi_Host_Template' structure and 'iscsi_tranport' structure template
@@ -2207,37 +2260,12 @@
CAP_MULTI_R2T | CAP_DATADGST |
CAP_DATA_PATH_OFFLOAD |
CAP_TEXT_NEGO,
- .param_mask = ISCSI_MAX_RECV_DLENGTH |
- ISCSI_MAX_XMIT_DLENGTH |
- ISCSI_HDRDGST_EN |
- ISCSI_DATADGST_EN |
- ISCSI_INITIAL_R2T_EN |
- ISCSI_MAX_R2T |
- ISCSI_IMM_DATA_EN |
- ISCSI_FIRST_BURST |
- ISCSI_MAX_BURST |
- ISCSI_PDU_INORDER_EN |
- ISCSI_DATASEQ_INORDER_EN |
- ISCSI_ERL |
- ISCSI_CONN_PORT |
- ISCSI_CONN_ADDRESS |
- ISCSI_EXP_STATSN |
- ISCSI_PERSISTENT_PORT |
- ISCSI_PERSISTENT_ADDRESS |
- ISCSI_TARGET_NAME | ISCSI_TPGT |
- ISCSI_USERNAME | ISCSI_PASSWORD |
- ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
- ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
- ISCSI_PING_TMO | ISCSI_RECV_TMO |
- ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
- .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
- ISCSI_HOST_NETDEV_NAME,
.create_session = bnx2i_session_create,
.destroy_session = bnx2i_session_destroy,
.create_conn = bnx2i_conn_create,
.bind_conn = bnx2i_conn_bind,
.destroy_conn = bnx2i_conn_destroy,
+ .attr_is_visible = bnx2i_attr_is_visible,
.set_param = iscsi_set_param,
.get_conn_param = iscsi_conn_get_param,
.get_session_param = iscsi_session_get_param,
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index 1242c7c..000294a 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -105,25 +105,7 @@
.caps = CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_HDRDGST
| CAP_DATADGST | CAP_DIGEST_OFFLOAD |
CAP_PADDING_OFFLOAD | CAP_TEXT_NEGO,
- .param_mask = ISCSI_MAX_RECV_DLENGTH | ISCSI_MAX_XMIT_DLENGTH |
- ISCSI_HDRDGST_EN | ISCSI_DATADGST_EN |
- ISCSI_INITIAL_R2T_EN | ISCSI_MAX_R2T |
- ISCSI_IMM_DATA_EN | ISCSI_FIRST_BURST |
- ISCSI_MAX_BURST | ISCSI_PDU_INORDER_EN |
- ISCSI_DATASEQ_INORDER_EN | ISCSI_ERL |
- ISCSI_CONN_PORT | ISCSI_CONN_ADDRESS |
- ISCSI_EXP_STATSN | ISCSI_PERSISTENT_PORT |
- ISCSI_PERSISTENT_ADDRESS |
- ISCSI_TARGET_NAME | ISCSI_TPGT |
- ISCSI_USERNAME | ISCSI_PASSWORD |
- ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
- ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
- ISCSI_PING_TMO | ISCSI_RECV_TMO |
- ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
- .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
- ISCSI_HOST_INITIATOR_NAME |
- ISCSI_HOST_NETDEV_NAME,
+ .attr_is_visible = cxgbi_attr_is_visible,
.get_host_param = cxgbi_get_host_param,
.set_host_param = cxgbi_set_host_param,
/* session management */
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index 31c79bd..ac7a9b1 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -106,25 +106,7 @@
.caps = CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_HDRDGST |
CAP_DATADGST | CAP_DIGEST_OFFLOAD |
CAP_PADDING_OFFLOAD | CAP_TEXT_NEGO,
- .param_mask = ISCSI_MAX_RECV_DLENGTH | ISCSI_MAX_XMIT_DLENGTH |
- ISCSI_HDRDGST_EN | ISCSI_DATADGST_EN |
- ISCSI_INITIAL_R2T_EN | ISCSI_MAX_R2T |
- ISCSI_IMM_DATA_EN | ISCSI_FIRST_BURST |
- ISCSI_MAX_BURST | ISCSI_PDU_INORDER_EN |
- ISCSI_DATASEQ_INORDER_EN | ISCSI_ERL |
- ISCSI_CONN_PORT | ISCSI_CONN_ADDRESS |
- ISCSI_EXP_STATSN | ISCSI_PERSISTENT_PORT |
- ISCSI_PERSISTENT_ADDRESS |
- ISCSI_TARGET_NAME | ISCSI_TPGT |
- ISCSI_USERNAME | ISCSI_PASSWORD |
- ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
- ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
- ISCSI_PING_TMO | ISCSI_RECV_TMO |
- ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
- .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
- ISCSI_HOST_INITIATOR_NAME |
- ISCSI_HOST_NETDEV_NAME,
+ .attr_is_visible = cxgbi_attr_is_visible,
.get_host_param = cxgbi_get_host_param,
.set_host_param = cxgbi_set_host_param,
/* session management */
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 1c1329b..c363a4b 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -2568,6 +2568,62 @@
}
EXPORT_SYMBOL_GPL(cxgbi_iscsi_cleanup);
+mode_t cxgbi_attr_is_visible(int param_type, int param)
+{
+ switch (param_type) {
+ case ISCSI_HOST_PARAM:
+ switch (param) {
+ case ISCSI_HOST_PARAM_NETDEV_NAME:
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ case ISCSI_HOST_PARAM_IPADDRESS:
+ case ISCSI_HOST_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ case ISCSI_PARAM:
+ switch (param) {
+ case ISCSI_PARAM_MAX_RECV_DLENGTH:
+ case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+ case ISCSI_PARAM_HDRDGST_EN:
+ case ISCSI_PARAM_DATADGST_EN:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_EXP_STATSN:
+ case ISCSI_PARAM_PERSISTENT_ADDRESS:
+ case ISCSI_PARAM_PERSISTENT_PORT:
+ case ISCSI_PARAM_PING_TMO:
+ case ISCSI_PARAM_RECV_TMO:
+ case ISCSI_PARAM_INITIAL_R2T_EN:
+ case ISCSI_PARAM_MAX_R2T:
+ case ISCSI_PARAM_IMM_DATA_EN:
+ case ISCSI_PARAM_FIRST_BURST:
+ case ISCSI_PARAM_MAX_BURST:
+ case ISCSI_PARAM_PDU_INORDER_EN:
+ case ISCSI_PARAM_DATASEQ_INORDER_EN:
+ case ISCSI_PARAM_ERL:
+ case ISCSI_PARAM_TARGET_NAME:
+ case ISCSI_PARAM_TPGT:
+ case ISCSI_PARAM_USERNAME:
+ case ISCSI_PARAM_PASSWORD:
+ case ISCSI_PARAM_USERNAME_IN:
+ case ISCSI_PARAM_PASSWORD_IN:
+ case ISCSI_PARAM_FAST_ABORT:
+ case ISCSI_PARAM_ABORT_TMO:
+ case ISCSI_PARAM_LU_RESET_TMO:
+ case ISCSI_PARAM_TGT_RESET_TMO:
+ case ISCSI_PARAM_IFACE_NAME:
+ case ISCSI_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cxgbi_attr_is_visible);
+
static int __init libcxgbi_init_module(void)
{
sw_tag_idx_bits = (__ilog2_u32(ISCSI_ITT_MASK)) + 1;
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 3a25b11..20c88279 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -709,6 +709,7 @@
void cxgbi_cleanup_task(struct iscsi_task *task);
+mode_t cxgbi_attr_is_visible(int param_type, int param);
void cxgbi_get_conn_stats(struct iscsi_cls_conn *, struct iscsi_stats *);
int cxgbi_set_conn_param(struct iscsi_cls_conn *,
enum iscsi_param, char *, int);
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 0119b81..7c05fd9 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -60,6 +60,46 @@
}
/*
+ * device_handler_match_function - Match a device handler to a device
+ * @sdev - SCSI device to be tested
+ *
+ * Tests @sdev against the match function of all registered device_handler.
+ * Returns the found device handler or NULL if not found.
+ */
+static struct scsi_device_handler *
+device_handler_match_function(struct scsi_device *sdev)
+{
+ struct scsi_device_handler *tmp_dh, *found_dh = NULL;
+
+ spin_lock(&list_lock);
+ list_for_each_entry(tmp_dh, &scsi_dh_list, list) {
+ if (tmp_dh->match && tmp_dh->match(sdev)) {
+ found_dh = tmp_dh;
+ break;
+ }
+ }
+ spin_unlock(&list_lock);
+ return found_dh;
+}
+
+/*
+ * device_handler_match_devlist - Match a device handler to a device
+ * @sdev - SCSI device to be tested
+ *
+ * Tests @sdev against all device_handler registered in the devlist.
+ * Returns the found device handler or NULL if not found.
+ */
+static struct scsi_device_handler *
+device_handler_match_devlist(struct scsi_device *sdev)
+{
+ int idx;
+
+ idx = scsi_get_device_flags_keyed(sdev, sdev->vendor, sdev->model,
+ SCSI_DEVINFO_DH);
+ return get_device_handler_by_idx(idx);
+}
+
+/*
* device_handler_match - Attach a device handler to a device
* @scsi_dh - The device handler to match against or NULL
* @sdev - SCSI device to be tested against @scsi_dh
@@ -72,12 +112,11 @@
device_handler_match(struct scsi_device_handler *scsi_dh,
struct scsi_device *sdev)
{
- struct scsi_device_handler *found_dh = NULL;
- int idx;
+ struct scsi_device_handler *found_dh;
- idx = scsi_get_device_flags_keyed(sdev, sdev->vendor, sdev->model,
- SCSI_DEVINFO_DH);
- found_dh = get_device_handler_by_idx(idx);
+ found_dh = device_handler_match_function(sdev);
+ if (!found_dh)
+ found_dh = device_handler_match_devlist(sdev);
if (scsi_dh && found_dh != scsi_dh)
found_dh = NULL;
@@ -151,6 +190,10 @@
struct scsi_device_handler *scsi_dh;
int err = -EINVAL;
+ if (sdev->sdev_state == SDEV_CANCEL ||
+ sdev->sdev_state == SDEV_DEL)
+ return -ENODEV;
+
if (!sdev->scsi_dh_data) {
/*
* Attach to a device handler
@@ -327,7 +370,7 @@
list_add(&scsi_dh->list, &scsi_dh_list);
spin_unlock(&list_lock);
- for (i = 0; scsi_dh->devlist[i].vendor; i++) {
+ for (i = 0; scsi_dh->devlist && scsi_dh->devlist[i].vendor; i++) {
scsi_dev_info_list_add_keyed(0,
scsi_dh->devlist[i].vendor,
scsi_dh->devlist[i].model,
@@ -360,7 +403,7 @@
bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh,
scsi_dh_notifier_remove);
- for (i = 0; scsi_dh->devlist[i].vendor; i++) {
+ for (i = 0; scsi_dh->devlist && scsi_dh->devlist[i].vendor; i++) {
scsi_dev_info_list_del_keyed(scsi_dh->devlist[i].vendor,
scsi_dh->devlist[i].model,
SCSI_DEVINFO_DH);
@@ -468,7 +511,7 @@
EXPORT_SYMBOL_GPL(scsi_dh_handler_exist);
/*
- * scsi_dh_handler_attach - Attach device handler
+ * scsi_dh_attach - Attach device handler
* @sdev - sdev the handler should be attached to
* @name - name of the handler to attach
*/
@@ -498,7 +541,7 @@
EXPORT_SYMBOL_GPL(scsi_dh_attach);
/*
- * scsi_dh_handler_detach - Detach device handler
+ * scsi_dh_detach - Detach device handler
* @sdev - sdev the handler should be detached from
*
* This function will detach the device handler only
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 6fec9fe..627f4b5 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -128,43 +128,6 @@
}
/*
- * submit_std_inquiry - Issue a standard INQUIRY command
- * @sdev: sdev the command should be send to
- */
-static int submit_std_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
-{
- struct request *rq;
- int err = SCSI_DH_RES_TEMP_UNAVAIL;
-
- rq = get_alua_req(sdev, h->inq, ALUA_INQUIRY_SIZE, READ);
- if (!rq)
- goto done;
-
- /* Prepare the command. */
- rq->cmd[0] = INQUIRY;
- rq->cmd[1] = 0;
- rq->cmd[2] = 0;
- rq->cmd[4] = ALUA_INQUIRY_SIZE;
- rq->cmd_len = COMMAND_SIZE(INQUIRY);
-
- rq->sense = h->sense;
- memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = h->senselen = 0;
-
- err = blk_execute_rq(rq->q, NULL, rq, 1);
- if (err == -EIO) {
- sdev_printk(KERN_INFO, sdev,
- "%s: std inquiry failed with %x\n",
- ALUA_DH_NAME, rq->errors);
- h->senselen = rq->sense_len;
- err = SCSI_DH_IO;
- }
- blk_put_request(rq);
-done:
- return err;
-}
-
-/*
* submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command
* @sdev: sdev the command should be sent to
*/
@@ -338,23 +301,17 @@
}
/*
- * alua_std_inquiry - Evaluate standard INQUIRY command
+ * alua_check_tpgs - Evaluate TPGS setting
* @sdev: device to be checked
*
- * Just extract the TPGS setting to find out if ALUA
+ * Examine the TPGS setting of the sdev to find out if ALUA
* is supported.
*/
-static int alua_std_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+static int alua_check_tpgs(struct scsi_device *sdev, struct alua_dh_data *h)
{
- int err;
+ int err = SCSI_DH_OK;
- err = submit_std_inquiry(sdev, h);
-
- if (err != SCSI_DH_OK)
- return err;
-
- /* Check TPGS setting */
- h->tpgs = (h->inq[5] >> 4) & 0x3;
+ h->tpgs = scsi_device_tpgs(sdev);
switch (h->tpgs) {
case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT:
sdev_printk(KERN_INFO, sdev,
@@ -508,27 +465,28 @@
* Power On, Reset, or Bus Device Reset, just retry.
*/
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
+ if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06)
/*
* ALUA state changed
*/
return ADD_TO_MLQUEUE;
- }
- if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
+ if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07)
/*
* Implicit ALUA state transition failed
*/
return ADD_TO_MLQUEUE;
- }
- if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e) {
+ if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x03)
+ /*
+ * Inquiry data has changed
+ */
+ return ADD_TO_MLQUEUE;
+ if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e)
/*
* REPORTED_LUNS_DATA_HAS_CHANGED is reported
* when switching controllers on targets like
* Intel Multi-Flex. We can just retry.
*/
return ADD_TO_MLQUEUE;
- }
-
break;
}
@@ -547,9 +505,9 @@
{
struct scsi_sense_hdr sense_hdr;
int len, k, off, valid_states = 0;
- char *ucp;
+ unsigned char *ucp;
unsigned err;
- unsigned long expiry, interval = 10;
+ unsigned long expiry, interval = 1;
expiry = round_jiffies_up(jiffies + ALUA_FAILOVER_TIMEOUT);
retry:
@@ -610,7 +568,7 @@
case TPGS_STATE_TRANSITIONING:
if (time_before(jiffies, expiry)) {
/* State transition, retry */
- interval *= 10;
+ interval *= 2;
msleep(interval);
goto retry;
}
@@ -642,7 +600,7 @@
{
int err;
- err = alua_std_inquiry(sdev, h);
+ err = alua_check_tpgs(sdev, h);
if (err != SCSI_DH_OK)
goto out;
@@ -674,11 +632,9 @@
struct alua_dh_data *h = get_alua_data(sdev);
int err = SCSI_DH_OK;
- if (h->group_id != -1) {
- err = alua_rtpg(sdev, h);
- if (err != SCSI_DH_OK)
- goto out;
- }
+ err = alua_rtpg(sdev, h);
+ if (err != SCSI_DH_OK)
+ goto out;
if (h->tpgs & TPGS_MODE_EXPLICIT &&
h->state != TPGS_STATE_OPTIMIZED &&
@@ -720,23 +676,10 @@
}
-static const struct scsi_dh_devlist alua_dev_list[] = {
- {"HP", "MSA VOLUME" },
- {"HP", "HSV101" },
- {"HP", "HSV111" },
- {"HP", "HSV200" },
- {"HP", "HSV210" },
- {"HP", "HSV300" },
- {"IBM", "2107900" },
- {"IBM", "2145" },
- {"Pillar", "Axiom" },
- {"Intel", "Multi-Flex"},
- {"NETAPP", "LUN"},
- {"NETAPP", "LUN C-Mode"},
- {"AIX", "NVDISK"},
- {"Promise", "VTrak"},
- {NULL, NULL}
-};
+static bool alua_match(struct scsi_device *sdev)
+{
+ return (scsi_device_tpgs(sdev) != 0);
+}
static int alua_bus_attach(struct scsi_device *sdev);
static void alua_bus_detach(struct scsi_device *sdev);
@@ -744,12 +687,12 @@
static struct scsi_device_handler alua_dh = {
.name = ALUA_DH_NAME,
.module = THIS_MODULE,
- .devlist = alua_dev_list,
.attach = alua_bus_attach,
.detach = alua_bus_detach,
.prep_fn = alua_prep_fn,
.check_sense = alua_check_sense,
.activate = alua_activate,
+ .match = alua_match,
};
/*
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 27c9d65..82d612f 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -1,5 +1,5 @@
/*
- * Engenio/LSI RDAC SCSI Device Handler
+ * LSI/Engenio/NetApp E-Series RDAC SCSI Device Handler
*
* Copyright (C) 2005 Mike Christie. All rights reserved.
* Copyright (C) Chandra Seetharaman, IBM Corp. 2007
@@ -795,6 +795,7 @@
{"IBM", "3526"},
{"SGI", "TP9400"},
{"SGI", "TP9500"},
+ {"SGI", "TP9700"},
{"SGI", "IS"},
{"STK", "OPENstorage D280"},
{"SUN", "CSM200_R"},
@@ -814,6 +815,7 @@
{"SUN", "CSM100_R_FC"},
{"SUN", "STK6580_6780"},
{"SUN", "SUN_6180"},
+ {"SUN", "ArrayStorage"},
{NULL, NULL},
};
@@ -945,7 +947,7 @@
module_init(rdac_init);
module_exit(rdac_exit);
-MODULE_DESCRIPTION("Multipath LSI/Engenio RDAC driver");
+MODULE_DESCRIPTION("Multipath LSI/Engenio/NetApp E-Series RDAC driver");
MODULE_AUTHOR("Mike Christie, Chandra Seetharaman");
MODULE_VERSION("01.00.0000.0000");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index a1c0ddd..61384ee4 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -51,7 +51,7 @@
MODULE_LICENSE("GPL v2");
/* Performance tuning parameters for fcoe */
-static unsigned int fcoe_ddp_min;
+static unsigned int fcoe_ddp_min = 4096;
module_param_named(ddp_min, fcoe_ddp_min, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ddp_min, "Minimum I/O size in bytes for " \
"Direct Data Placement (DDP).");
@@ -137,7 +137,6 @@
static int fcoe_vport_disable(struct fc_vport *, bool disable);
static void fcoe_set_vport_symbolic_name(struct fc_vport *);
static void fcoe_set_port_id(struct fc_lport *, u32, struct fc_frame *);
-static int fcoe_validate_vport_create(struct fc_vport *);
static struct libfc_function_template fcoe_libfc_fcn_templ = {
.frame_send = fcoe_xmit,
@@ -280,6 +279,7 @@
* use the first one for SPMA */
real_dev = (netdev->priv_flags & IFF_802_1Q_VLAN) ?
vlan_dev_real_dev(netdev) : netdev;
+ fcoe->realdev = real_dev;
rcu_read_lock();
for_each_dev_addr(real_dev, ha) {
if ((ha->type == NETDEV_HW_ADDR_T_SAN) &&
@@ -580,23 +580,6 @@
}
/**
- * fcoe_get_wwn() - Get the world wide name from LLD if it supports it
- * @netdev: the associated net device
- * @wwn: the output WWN
- * @type: the type of WWN (WWPN or WWNN)
- *
- * Returns: 0 for success
- */
-static int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
-{
- const struct net_device_ops *ops = netdev->netdev_ops;
-
- if (ops->ndo_fcoe_get_wwn)
- return ops->ndo_fcoe_get_wwn(netdev, wwn, type);
- return -EINVAL;
-}
-
-/**
* fcoe_netdev_features_change - Updates the lport's offload flags based
* on the LLD netdev's FCoE feature flags
*/
@@ -1134,8 +1117,9 @@
p = &per_cpu(fcoe_percpu, cpu);
- thread = kthread_create(fcoe_percpu_receive_thread,
- (void *)p, "fcoethread/%d", cpu);
+ thread = kthread_create_on_node(fcoe_percpu_receive_thread,
+ (void *)p, cpu_to_node(cpu),
+ "fcoethread/%d", cpu);
if (likely(!IS_ERR(thread))) {
kthread_bind(thread, cpu);
@@ -1538,7 +1522,13 @@
skb_reset_network_header(skb);
skb->mac_len = elen;
skb->protocol = htons(ETH_P_FCOE);
- skb->dev = fcoe->netdev;
+ if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN &&
+ fcoe->realdev->features & NETIF_F_HW_VLAN_TX) {
+ skb->vlan_tci = VLAN_TAG_PRESENT |
+ vlan_dev_vlan_id(fcoe->netdev);
+ skb->dev = fcoe->realdev;
+ } else
+ skb->dev = fcoe->netdev;
/* fill up mac and fcoe headers */
eh = eth_hdr(skb);
@@ -2446,7 +2436,7 @@
rc = fcoe_validate_vport_create(vport);
if (rc) {
- wwn_to_str(vport->port_name, buf, sizeof(buf));
+ fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf));
printk(KERN_ERR "fcoe: Failed to create vport, "
"WWPN (0x%s) already exists\n",
buf);
@@ -2555,28 +2545,9 @@
static void fcoe_get_lesb(struct fc_lport *lport,
struct fc_els_lesb *fc_lesb)
{
- unsigned int cpu;
- u32 lfc, vlfc, mdac;
- struct fcoe_dev_stats *devst;
- struct fcoe_fc_els_lesb *lesb;
- struct rtnl_link_stats64 temp;
struct net_device *netdev = fcoe_netdev(lport);
- lfc = 0;
- vlfc = 0;
- mdac = 0;
- lesb = (struct fcoe_fc_els_lesb *)fc_lesb;
- memset(lesb, 0, sizeof(*lesb));
- for_each_possible_cpu(cpu) {
- devst = per_cpu_ptr(lport->dev_stats, cpu);
- lfc += devst->LinkFailureCount;
- vlfc += devst->VLinkFailureCount;
- mdac += devst->MissDiscAdvCount;
- }
- lesb->lesb_link_fail = htonl(lfc);
- lesb->lesb_vlink_fail = htonl(vlfc);
- lesb->lesb_miss_fka = htonl(mdac);
- lesb->lesb_fcs_error = htonl(dev_get_stats(netdev, &temp)->rx_crc_errors);
+ __fcoe_get_lesb(lport, fc_lesb, netdev);
}
/**
@@ -2600,49 +2571,3 @@
if (fp && fc_frame_payload_op(fp) == ELS_FLOGI)
fcoe_ctlr_recv_flogi(&fcoe->ctlr, lport, fp);
}
-
-/**
- * fcoe_validate_vport_create() - Validate a vport before creating it
- * @vport: NPIV port to be created
- *
- * This routine is meant to add validation for a vport before creating it
- * via fcoe_vport_create().
- * Current validations are:
- * - WWPN supplied is unique for given lport
- *
- *
-*/
-static int fcoe_validate_vport_create(struct fc_vport *vport)
-{
- struct Scsi_Host *shost = vport_to_shost(vport);
- struct fc_lport *n_port = shost_priv(shost);
- struct fc_lport *vn_port;
- int rc = 0;
- char buf[32];
-
- mutex_lock(&n_port->lp_mutex);
-
- wwn_to_str(vport->port_name, buf, sizeof(buf));
- /* Check if the wwpn is not same as that of the lport */
- if (!memcmp(&n_port->wwpn, &vport->port_name, sizeof(u64))) {
- FCOE_DBG("vport WWPN 0x%s is same as that of the "
- "base port WWPN\n", buf);
- rc = -EINVAL;
- goto out;
- }
-
- /* Check if there is any existing vport with same wwpn */
- list_for_each_entry(vn_port, &n_port->vports, list) {
- if (!memcmp(&vn_port->wwpn, &vport->port_name, sizeof(u64))) {
- FCOE_DBG("vport with given WWPN 0x%s already "
- "exists\n", buf);
- rc = -EINVAL;
- break;
- }
- }
-
-out:
- mutex_unlock(&n_port->lp_mutex);
-
- return rc;
-}
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index c4a9399..6c6884b 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -80,6 +80,7 @@
struct fcoe_interface {
struct list_head list;
struct net_device *netdev;
+ struct net_device *realdev;
struct packet_type fcoe_packet_type;
struct packet_type fip_packet_type;
struct fcoe_ctlr ctlr;
@@ -99,14 +100,4 @@
((struct fcoe_port *)lport_priv(lport))->priv)->netdev;
}
-static inline void wwn_to_str(u64 wwn, char *buf, int len)
-{
- u8 wwpn[8];
-
- u64_to_wwn(wwn, wwpn);
- snprintf(buf, len, "%02x%02x%02x%02x%02x%02x%02x%02x",
- wwpn[0], wwpn[1], wwpn[2], wwpn[3],
- wwpn[4], wwpn[5], wwpn[6], wwpn[7]);
-}
-
#endif /* _FCOE_H_ */
diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index dac8e39..bd97b22 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -83,6 +83,107 @@
.notifier_call = libfcoe_device_notification,
};
+void __fcoe_get_lesb(struct fc_lport *lport,
+ struct fc_els_lesb *fc_lesb,
+ struct net_device *netdev)
+{
+ unsigned int cpu;
+ u32 lfc, vlfc, mdac;
+ struct fcoe_dev_stats *devst;
+ struct fcoe_fc_els_lesb *lesb;
+ struct rtnl_link_stats64 temp;
+
+ lfc = 0;
+ vlfc = 0;
+ mdac = 0;
+ lesb = (struct fcoe_fc_els_lesb *)fc_lesb;
+ memset(lesb, 0, sizeof(*lesb));
+ for_each_possible_cpu(cpu) {
+ devst = per_cpu_ptr(lport->dev_stats, cpu);
+ lfc += devst->LinkFailureCount;
+ vlfc += devst->VLinkFailureCount;
+ mdac += devst->MissDiscAdvCount;
+ }
+ lesb->lesb_link_fail = htonl(lfc);
+ lesb->lesb_vlink_fail = htonl(vlfc);
+ lesb->lesb_miss_fka = htonl(mdac);
+ lesb->lesb_fcs_error =
+ htonl(dev_get_stats(netdev, &temp)->rx_crc_errors);
+}
+EXPORT_SYMBOL_GPL(__fcoe_get_lesb);
+
+void fcoe_wwn_to_str(u64 wwn, char *buf, int len)
+{
+ u8 wwpn[8];
+
+ u64_to_wwn(wwn, wwpn);
+ snprintf(buf, len, "%02x%02x%02x%02x%02x%02x%02x%02x",
+ wwpn[0], wwpn[1], wwpn[2], wwpn[3],
+ wwpn[4], wwpn[5], wwpn[6], wwpn[7]);
+}
+EXPORT_SYMBOL_GPL(fcoe_wwn_to_str);
+
+/**
+ * fcoe_validate_vport_create() - Validate a vport before creating it
+ * @vport: NPIV port to be created
+ *
+ * This routine is meant to add validation for a vport before creating it
+ * via fcoe_vport_create().
+ * Current validations are:
+ * - WWPN supplied is unique for given lport
+ */
+int fcoe_validate_vport_create(struct fc_vport *vport)
+{
+ struct Scsi_Host *shost = vport_to_shost(vport);
+ struct fc_lport *n_port = shost_priv(shost);
+ struct fc_lport *vn_port;
+ int rc = 0;
+ char buf[32];
+
+ mutex_lock(&n_port->lp_mutex);
+
+ fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf));
+ /* Check if the wwpn is not same as that of the lport */
+ if (!memcmp(&n_port->wwpn, &vport->port_name, sizeof(u64))) {
+ LIBFCOE_TRANSPORT_DBG("vport WWPN 0x%s is same as that of the "
+ "base port WWPN\n", buf);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Check if there is any existing vport with same wwpn */
+ list_for_each_entry(vn_port, &n_port->vports, list) {
+ if (!memcmp(&vn_port->wwpn, &vport->port_name, sizeof(u64))) {
+ LIBFCOE_TRANSPORT_DBG("vport with given WWPN 0x%s "
+ "already exists\n", buf);
+ rc = -EINVAL;
+ break;
+ }
+ }
+out:
+ mutex_unlock(&n_port->lp_mutex);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(fcoe_validate_vport_create);
+
+/**
+ * fcoe_get_wwn() - Get the world wide name from LLD if it supports it
+ * @netdev: the associated net device
+ * @wwn: the output WWN
+ * @type: the type of WWN (WWPN or WWNN)
+ *
+ * Returns: 0 for success
+ */
+int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
+{
+ const struct net_device_ops *ops = netdev->netdev_ops;
+
+ if (ops->ndo_fcoe_get_wwn)
+ return ops->ndo_fcoe_get_wwn(netdev, wwn, type);
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(fcoe_get_wwn);
+
/**
* fcoe_fc_crc() - Calculates the CRC for a given frame
* @fp: The frame to be checksumed
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b200b73..9825ecf 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3438,10 +3438,8 @@
} else {
use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
if (use_doorbell) {
- dev_warn(&pdev->dev, "Controller claims that "
- "'Bit 2 doorbell reset' is "
- "supported, but not 'bit 5 doorbell reset'. "
- "Firmware update is recommended.\n");
+ dev_warn(&pdev->dev, "Soft reset not supported. "
+ "Firmware update is required.\n");
rc = -ENOTSUPP; /* try soft reset */
goto unmap_cfgtable;
}
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 8d63630..73e24b4 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -2901,7 +2901,7 @@
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
- if (ioa_cfg->sdt_state != GET_DUMP) {
+ if (ioa_cfg->sdt_state != READ_DUMP) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
@@ -3097,7 +3097,7 @@
ENTER;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
- if (ioa_cfg->sdt_state == GET_DUMP) {
+ if (ioa_cfg->sdt_state == READ_DUMP) {
dump = ioa_cfg->dump;
if (!dump) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
@@ -3109,7 +3109,7 @@
kref_put(&dump->kref, ipr_release_dump);
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
- if (ioa_cfg->sdt_state == DUMP_OBTAINED)
+ if (ioa_cfg->sdt_state == DUMP_OBTAINED && !ioa_cfg->dump_timeout)
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
@@ -3751,14 +3751,6 @@
image_hdr = (struct ipr_ucode_image_header *)fw_entry->data;
- if (be32_to_cpu(image_hdr->header_length) > fw_entry->size ||
- (ioa_cfg->vpd_cbs->page3_data.card_type &&
- ioa_cfg->vpd_cbs->page3_data.card_type != image_hdr->card_type)) {
- dev_err(&ioa_cfg->pdev->dev, "Invalid microcode buffer\n");
- release_firmware(fw_entry);
- return -EINVAL;
- }
-
src = (u8 *)image_hdr + be32_to_cpu(image_hdr->header_length);
dnld_size = fw_entry->size - be32_to_cpu(image_hdr->header_length);
sglist = ipr_alloc_ucode_buffer(dnld_size);
@@ -3777,6 +3769,8 @@
goto out;
}
+ ipr_info("Updating microcode, please be patient. This may take up to 30 minutes.\n");
+
result = ipr_update_ioa_ucode(ioa_cfg, sglist);
if (!result)
@@ -7449,8 +7443,11 @@
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
if (ioa_cfg->sdt_state == GET_DUMP)
+ ioa_cfg->sdt_state = WAIT_FOR_DUMP;
+ else if (ioa_cfg->sdt_state == READ_DUMP)
ioa_cfg->sdt_state = ABORT_DUMP;
+ ioa_cfg->dump_timeout = 1;
ipr_cmd->job_step = ipr_reset_alert;
return IPR_RC_JOB_CONTINUE;
@@ -7614,6 +7611,8 @@
ipr_cmd->job_step = ipr_reset_enable_ioa;
if (GET_DUMP == ioa_cfg->sdt_state) {
+ ioa_cfg->sdt_state = READ_DUMP;
+ ioa_cfg->dump_timeout = 0;
if (ioa_cfg->sis64)
ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
else
@@ -8003,8 +8002,12 @@
if (ioa_cfg->ioa_is_dead)
return;
- if (ioa_cfg->in_reset_reload && ioa_cfg->sdt_state == GET_DUMP)
- ioa_cfg->sdt_state = ABORT_DUMP;
+ if (ioa_cfg->in_reset_reload) {
+ if (ioa_cfg->sdt_state == GET_DUMP)
+ ioa_cfg->sdt_state = WAIT_FOR_DUMP;
+ else if (ioa_cfg->sdt_state == READ_DUMP)
+ ioa_cfg->sdt_state = ABORT_DUMP;
+ }
if (ioa_cfg->reset_retries++ >= IPR_NUM_RESET_RELOAD_RETRIES) {
dev_err(&ioa_cfg->pdev->dev,
@@ -8812,7 +8815,7 @@
uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg32);
if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
ioa_cfg->needs_hard_reset = 1;
- if (interrupts & IPR_PCII_ERROR_INTERRUPTS)
+ if ((interrupts & IPR_PCII_ERROR_INTERRUPTS) || reset_devices)
ioa_cfg->needs_hard_reset = 1;
if (interrupts & IPR_PCII_IOA_UNIT_CHECKED)
ioa_cfg->ioa_unit_checked = 1;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index f93f863..6d257e0 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -208,7 +208,7 @@
#define IPR_CANCEL_ALL_TIMEOUT (ipr_fastfail ? 10 * HZ : 30 * HZ)
#define IPR_ABORT_TASK_TIMEOUT (ipr_fastfail ? 10 * HZ : 30 * HZ)
#define IPR_INTERNAL_TIMEOUT (ipr_fastfail ? 10 * HZ : 30 * HZ)
-#define IPR_WRITE_BUFFER_TIMEOUT (10 * 60 * HZ)
+#define IPR_WRITE_BUFFER_TIMEOUT (30 * 60 * HZ)
#define IPR_SET_SUP_DEVICE_TIMEOUT (2 * 60 * HZ)
#define IPR_REQUEST_SENSE_TIMEOUT (10 * HZ)
#define IPR_OPERATIONAL_TIMEOUT (5 * 60)
@@ -1360,6 +1360,7 @@
INACTIVE,
WAIT_FOR_DUMP,
GET_DUMP,
+ READ_DUMP,
ABORT_DUMP,
DUMP_OBTAINED
};
@@ -1384,6 +1385,7 @@
u8 needs_warm_reset:1;
u8 msi_received:1;
u8 sis64:1;
+ u8 dump_timeout:1;
u8 revid;
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 6981b77..f07f30f 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1263,6 +1263,10 @@
{
int i;
+ /* disable output data selects */
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+
isci_host_change_state(ihost, isci_stopping);
for (i = 0; i < SCI_MAX_PORTS; i++) {
struct isci_port *iport = &ihost->ports[i];
@@ -1281,6 +1285,12 @@
spin_unlock_irq(&ihost->scic_lock);
wait_for_stop(ihost);
+
+ /* disable sgpio: where the above wait should give time for the
+ * enclosure to sample the gpios going inactive
+ */
+ writel(0, &ihost->scu_registers->peg0.sgpio.interface_control);
+
sci_controller_reset(ihost);
/* Cancel any/all outstanding port timers */
@@ -2365,6 +2375,12 @@
for (i = 0; i < SCI_MAX_PHYS; i++)
isci_phy_init(&ihost->phys[i], ihost, i);
+ /* enable sgpio */
+ writel(1, &ihost->scu_registers->peg0.sgpio.interface_control);
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+ writel(0, &ihost->scu_registers->peg0.sgpio.vendor_specific_code);
+
for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
struct isci_remote_device *idev = &ihost->devices[i];
@@ -2760,3 +2776,56 @@
return status;
}
+
+static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_count, u8 *write_data)
+{
+ int d;
+
+ /* no support for TX_GP_CFG */
+ if (reg_index == 0)
+ return -EINVAL;
+
+ for (d = 0; d < isci_gpio_count(ihost); d++) {
+ u32 val = 0x444; /* all ODx.n clear */
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ int bit = (i << 2) + 2;
+
+ bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i),
+ write_data, reg_index,
+ reg_count);
+ if (bit < 0)
+ break;
+
+ /* if od is set, clear the 'invert' bit */
+ val &= ~(bit << ((i << 2) + 2));
+ }
+
+ if (i < 3)
+ break;
+ writel(val, &ihost->scu_registers->peg0.sgpio.output_data_select[d]);
+ }
+
+ /* unless reg_index is > 1, we should always be able to write at
+ * least one register
+ */
+ return d > 0;
+}
+
+int isci_gpio_write(struct sas_ha_struct *sas_ha, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data)
+{
+ struct isci_host *ihost = sas_ha->lldd_ha;
+ int written;
+
+ switch (reg_type) {
+ case SAS_GPIO_REG_TX_GP:
+ written = sci_write_gpio_tx_gp(ihost, reg_index, reg_count, write_data);
+ break;
+ default:
+ written = -EINVAL;
+ }
+
+ return written;
+}
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 9f33831..646051a 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -440,6 +440,18 @@
return false;
}
+/* set hw control for 'activity', even though active enclosures seem to drive
+ * the activity led on their own. Skip setting FSENG control on 'status' due
+ * to unexpected operation and 'error' due to not being a supported automatic
+ * FSENG output
+ */
+#define SGPIO_HW_CONTROL 0x00000443
+
+static inline int isci_gpio_count(struct isci_host *ihost)
+{
+ return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select);
+}
+
void sci_controller_post_request(struct isci_host *ihost,
u32 request);
void sci_controller_release_frame(struct isci_host *ihost,
@@ -542,4 +554,7 @@
enum sci_status sci_port_configuration_agent_initialize(
struct isci_host *ihost,
struct sci_port_configuration_agent *port_agent);
+
+int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data);
#endif
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 29aa34e..43fe840 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -192,6 +192,9 @@
/* Phy management */
.lldd_control_phy = isci_phy_control,
+
+ /* GPIO support */
+ .lldd_write_gpio = isci_gpio_write,
};
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
index d1de633..8efeb6b 100644
--- a/drivers/scsi/isci/isci.h
+++ b/drivers/scsi/isci/isci.h
@@ -97,7 +97,7 @@
#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES))
#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096)
-#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024)
+#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024U)
#define SCU_INVALID_FRAME_INDEX (0xFFFF)
#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF)
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 09e6113..35f50c2 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -1313,6 +1313,17 @@
ret = isci_port_perform_hard_reset(ihost, iport, iphy);
break;
+ case PHY_FUNC_GET_EVENTS: {
+ struct scu_link_layer_registers __iomem *r;
+ struct sas_phy *phy = sas_phy->phy;
+
+ r = iphy->link_layer_registers;
+ phy->running_disparity_error_count = readl(&r->running_disparity_error_count);
+ phy->loss_of_dword_sync_count = readl(&r->loss_of_sync_error_count);
+ phy->phy_reset_problem_count = readl(&r->phy_reset_problem_count);
+ phy->invalid_dword_count = readl(&r->invalid_dword_counter);
+ break;
+ }
default:
dev_dbg(&ihost->pdev->dev,
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 8f6f9b7..8e59c88 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -294,8 +294,8 @@
__func__, isci_device);
set_bit(IDEV_GONE, &isci_device->flags);
}
+ isci_port_change_state(isci_port, isci_stopping);
}
- isci_port_change_state(isci_port, isci_stopping);
}
/* Notify libsas of the borken link, this will trigger calls to our
diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c
index 486b113..38a99d2 100644
--- a/drivers/scsi/isci/port_config.c
+++ b/drivers/scsi/isci/port_config.c
@@ -678,7 +678,7 @@
configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
if (!configure_phy_mask)
- return;
+ goto done;
for (index = 0; index < SCI_MAX_PHYS; index++) {
if ((configure_phy_mask & (1 << index)) == 0)
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index 00afc73..eaa541a 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -875,122 +875,6 @@
#define SCU_PTSxSR_GEN_BIT(name) \
SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name)
-
-/*
- * *****************************************************************************
- * * SGPIO Register shift and mask values
- * ***************************************************************************** */
-#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0)
-#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2)
-#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004)
-#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15)
-#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000)
-#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8)
-
-#define SCU_SGICRx_GEN_BIT(name) \
- SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name)
-
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000)
-#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000)
-
-#define SCU_SGPBRx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value)
-
-#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0)
-#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003)
-#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4)
-#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030)
-#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8)
-#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300)
-#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12)
-#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000)
-#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSDLRx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
-
-#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0)
-#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003)
-#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4)
-#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030)
-#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8)
-#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300)
-#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12)
-#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000)
-#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSDURx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
-
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSIDLRx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
-
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000)
-#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888)
-
-#define SCU_SGSIDURx_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
-
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0)
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F)
-#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0)
-
-#define SCU_SGVSCR_GEN_VAL(value) \
- SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value)
-
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800)
-#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000)
-
-#define SCU_SGODSR_GEN_VAL(name, value) \
- SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value)
-
-#define SCU_SGODSR_GEN_BIT(name) \
- SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name)
-
/*
* *****************************************************************************
* * SMU Registers
@@ -1529,10 +1413,12 @@
u32 serial_input_upper;
/* 0x0018 SGPIO_SGVSCR */
u32 vendor_specific_code;
+/* 0x001C Reserved */
+ u32 reserved_001c;
/* 0x0020 SGPIO_SGODSR */
- u32 ouput_data_select[8];
+ u32 output_data_select[8];
/* Remainder of memory space 256 bytes */
- u32 reserved_1444_14ff[0x31];
+ u32 reserved_1444_14ff[0x30];
};
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index b6e6368..fbf9ce2 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -386,6 +386,18 @@
}
}
+/*
+ * called once the remote node context has transisitioned to a ready
+ * state (after suspending RX and/or TX due to early D2H fis)
+ */
+static void atapi_remote_device_resume_done(void *_dev)
+{
+ struct isci_remote_device *idev = _dev;
+ struct isci_request *ireq = idev->working_request;
+
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+}
+
enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
u32 event_code)
{
@@ -432,6 +444,16 @@
if (status != SCI_SUCCESS)
return status;
+ if (state == SCI_STP_DEV_ATAPI_ERROR) {
+ /* For ATAPI error state resume the RNC right away. */
+ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
+ scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) {
+ return sci_remote_node_context_resume(&idev->rnc,
+ atapi_remote_device_resume_done,
+ idev);
+ }
+ }
+
if (state == SCI_STP_DEV_IDLE) {
/* We pick up suspension events to handle specifically to this
@@ -625,6 +647,7 @@
case SCI_STP_DEV_CMD:
case SCI_STP_DEV_NCQ:
case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_STP_DEV_ATAPI_ERROR:
status = common_complete_io(iport, idev, ireq);
if (status != SCI_SUCCESS)
break;
@@ -1020,6 +1043,7 @@
[SCI_STP_DEV_NCQ_ERROR] = {
.enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter,
},
+ [SCI_STP_DEV_ATAPI_ERROR] = { },
[SCI_STP_DEV_AWAIT_RESET] = { },
[SCI_SMP_DEV_IDLE] = {
.enter_state = sci_smp_remote_device_ready_idle_substate_enter,
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 57ccfc3..e1747ea 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -244,6 +244,15 @@
SCI_STP_DEV_NCQ_ERROR,
/**
+ * This is the ATAPI error state for the STP ATAPI remote device.
+ * This state is entered when ATAPI device sends error status FIS
+ * without data while the device object is in CMD state.
+ * A suspension event is expected in this state.
+ * The device object will resume right away.
+ */
+ SCI_STP_DEV_ATAPI_ERROR,
+
+ /**
* This is the READY substate indicates the device is waiting for the RESET task
* coming to be recovered from certain hardware specific error.
*/
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index b5d3a8c..565a9f0 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -481,7 +481,29 @@
}
}
+static void sci_atapi_construct(struct isci_request *ireq)
+{
+ struct host_to_dev_fis *h2d_fis = &ireq->stp.cmd;
+ struct sas_task *task;
+ /* To simplify the implementation we take advantage of the
+ * silicon's partial acceleration of atapi protocol (dma data
+ * transfers), so we promote all commands to dma protocol. This
+ * breaks compatibility with ATA_HORKAGE_ATAPI_MOD16_DMA drives.
+ */
+ h2d_fis->features |= ATAPI_PKT_DMA;
+
+ scu_stp_raw_request_construct_task_context(ireq);
+
+ task = isci_request_access_task(ireq);
+ if (task->data_dir == DMA_NONE)
+ task->total_xfer_len = 0;
+
+ /* clear the response so we can detect arrivial of an
+ * unsolicited h2d fis
+ */
+ ireq->stp.rsp.fis_type = 0;
+}
static enum sci_status
sci_io_request_construct_sata(struct isci_request *ireq,
@@ -491,6 +513,7 @@
{
enum sci_status status = SCI_SUCCESS;
struct sas_task *task = isci_request_access_task(ireq);
+ struct domain_device *dev = ireq->target_device->domain_dev;
/* check for management protocols */
if (ireq->ttype == tmf_task) {
@@ -519,6 +542,13 @@
}
+ /* ATAPI */
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+ task->ata_task.fis.command == ATA_CMD_PACKET) {
+ sci_atapi_construct(ireq);
+ return SCI_SUCCESS;
+ }
+
/* non data */
if (task->data_dir == DMA_NONE) {
scu_stp_raw_request_construct_task_context(ireq);
@@ -627,7 +657,7 @@
/**
* sci_req_tx_bytes - bytes transferred when reply underruns request
- * @sci_req: request that was terminated early
+ * @ireq: request that was terminated early
*/
#define SCU_TASK_CONTEXT_SRAM 0x200000
static u32 sci_req_tx_bytes(struct isci_request *ireq)
@@ -729,6 +759,10 @@
case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
case SCI_REQ_STP_SOFT_RESET_WAIT_D2H:
+ case SCI_REQ_ATAPI_WAIT_H2D:
+ case SCI_REQ_ATAPI_WAIT_PIO_SETUP:
+ case SCI_REQ_ATAPI_WAIT_D2H:
+ case SCI_REQ_ATAPI_WAIT_TC_COMP:
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
return SCI_SUCCESS;
case SCI_REQ_TASK_WAIT_TC_RESP:
@@ -1194,8 +1228,8 @@
{
struct isci_stp_request *stp_req = &ireq->stp.req;
struct scu_sgl_element_pair *sgl_pair;
+ enum sci_status status = SCI_SUCCESS;
struct scu_sgl_element *sgl;
- enum sci_status status;
u32 offset;
u32 len = 0;
@@ -1249,7 +1283,7 @@
*/
static enum sci_status
sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req,
- u8 *data_buf, u32 len)
+ u8 *data_buf, u32 len)
{
struct isci_request *ireq;
u8 *src_addr;
@@ -1423,6 +1457,128 @@
return status;
}
+static enum sci_status process_unsolicited_fis(struct isci_request *ireq,
+ u32 frame_index)
+{
+ struct isci_host *ihost = ireq->owning_controller;
+ enum sci_status status;
+ struct dev_to_host_fis *frame_header;
+ u32 *frame_buffer;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ if (frame_header->fis_type != FIS_REGD2H) {
+ dev_err(&ireq->isci_host->pdev->dev,
+ "%s ERROR: invalid fis type 0x%X\n",
+ __func__, frame_header->fis_type);
+ return SCI_FAILURE;
+ }
+
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
+ (u32 *)frame_header,
+ frame_buffer);
+
+ /* Frame has been decoded return it to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+
+ return status;
+}
+
+static enum sci_status atapi_d2h_reg_frame_handler(struct isci_request *ireq,
+ u32 frame_index)
+{
+ struct sas_task *task = isci_request_access_task(ireq);
+ enum sci_status status;
+
+ status = process_unsolicited_fis(ireq, frame_index);
+
+ if (status == SCI_SUCCESS) {
+ if (ireq->stp.rsp.status & ATA_ERR)
+ status = SCI_IO_FAILURE_RESPONSE_VALID;
+ } else {
+ status = SCI_IO_FAILURE_RESPONSE_VALID;
+ }
+
+ if (status != SCI_SUCCESS) {
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = status;
+ } else {
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ }
+
+ /* the d2h ufi is the end of non-data commands */
+ if (task->data_dir == DMA_NONE)
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+
+ return status;
+}
+
+static void scu_atapi_reconstruct_raw_frame_task_context(struct isci_request *ireq)
+{
+ struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev);
+ void *atapi_cdb = ireq->ttype_ptr.io_task_ptr->ata_task.atapi_packet;
+ struct scu_task_context *task_context = ireq->tc;
+
+ /* fill in the SCU Task Context for a DATA fis containing CDB in Raw Frame
+ * type. The TC for previous Packet fis was already there, we only need to
+ * change the H2D fis content.
+ */
+ memset(&ireq->stp.cmd, 0, sizeof(struct host_to_dev_fis));
+ memcpy(((u8 *)&ireq->stp.cmd + sizeof(u32)), atapi_cdb, ATAPI_CDB_LEN);
+ memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context));
+ task_context->type.stp.fis_type = FIS_DATA;
+ task_context->transfer_length_bytes = dev->cdb_len;
+}
+
+static void scu_atapi_construct_task_context(struct isci_request *ireq)
+{
+ struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev);
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct scu_task_context *task_context = ireq->tc;
+ int cdb_len = dev->cdb_len;
+
+ /* reference: SSTL 1.13.4.2
+ * task_type, sata_direction
+ */
+ if (task->data_dir == DMA_TO_DEVICE) {
+ task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_OUT;
+ task_context->sata_direction = 0;
+ } else {
+ /* todo: for NO_DATA command, we need to send out raw frame. */
+ task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_IN;
+ task_context->sata_direction = 1;
+ }
+
+ memset(&task_context->type.stp, 0, sizeof(task_context->type.stp));
+ task_context->type.stp.fis_type = FIS_DATA;
+
+ memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
+ memcpy(&ireq->stp.cmd.lbal, task->ata_task.atapi_packet, cdb_len);
+ task_context->ssp_command_iu_length = cdb_len / sizeof(u32);
+
+ /* task phase is set to TX_CMD */
+ task_context->task_phase = 0x1;
+
+ /* retry counter */
+ task_context->stp_retry_count = 0;
+
+ /* data transfer size. */
+ task_context->transfer_length_bytes = task->total_xfer_len;
+
+ /* setup sgl */
+ sci_request_build_sgl(ireq);
+}
+
enum sci_status
sci_io_request_frame_handler(struct isci_request *ireq,
u32 frame_index)
@@ -1490,29 +1646,30 @@
return SCI_SUCCESS;
case SCI_REQ_SMP_WAIT_RESP: {
- struct smp_resp *rsp_hdr = &ireq->smp.rsp;
- void *frame_header;
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct scatterlist *sg = &task->smp_task.smp_resp;
+ void *frame_header, *kaddr;
+ u8 *rsp;
sci_unsolicited_frame_control_get_header(&ihost->uf_control,
- frame_index,
- &frame_header);
+ frame_index,
+ &frame_header);
+ kaddr = kmap_atomic(sg_page(sg), KM_IRQ0);
+ rsp = kaddr + sg->offset;
+ sci_swab32_cpy(rsp, frame_header, 1);
- /* byte swap the header. */
- word_cnt = SMP_RESP_HDR_SZ / sizeof(u32);
- sci_swab32_cpy(rsp_hdr, frame_header, word_cnt);
-
- if (rsp_hdr->frame_type == SMP_RESPONSE) {
+ if (rsp[0] == SMP_RESPONSE) {
void *smp_resp;
sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
- frame_index,
- &smp_resp);
+ frame_index,
+ &smp_resp);
- word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) /
- sizeof(u32);
-
- sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ,
- smp_resp, word_cnt);
+ word_cnt = (sg->length/4)-1;
+ if (word_cnt > 0)
+ word_cnt = min_t(unsigned int, word_cnt,
+ SCU_UNSOLICITED_FRAME_BUFFER_SIZE/4);
+ sci_swab32_cpy(rsp + 4, smp_resp, word_cnt);
ireq->scu_status = SCU_TASK_DONE_GOOD;
ireq->sci_status = SCI_SUCCESS;
@@ -1528,12 +1685,13 @@
__func__,
ireq,
frame_index,
- rsp_hdr->frame_type);
+ rsp[0]);
ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR;
ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
}
+ kunmap_atomic(kaddr, KM_IRQ0);
sci_controller_release_frame(ihost, frame_index);
@@ -1833,6 +1991,24 @@
return status;
}
+ case SCI_REQ_ATAPI_WAIT_PIO_SETUP: {
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ sci_controller_release_frame(ihost, frame_index);
+ ireq->target_device->working_request = ireq;
+ if (task->data_dir == DMA_NONE) {
+ sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_TC_COMP);
+ scu_atapi_reconstruct_raw_frame_task_context(ireq);
+ } else {
+ sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H);
+ scu_atapi_construct_task_context(ireq);
+ }
+
+ sci_controller_continue_io(ireq);
+ return SCI_SUCCESS;
+ }
+ case SCI_REQ_ATAPI_WAIT_D2H:
+ return atapi_d2h_reg_frame_handler(ireq, frame_index);
case SCI_REQ_ABORTING:
/*
* TODO: Is it even possible to get an unsolicited frame in the
@@ -1898,10 +2074,9 @@
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
- case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
sci_remote_device_suspend(ireq->target_device,
SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
- /* Fall through to the default case */
+ /* Fall through to the default case */
default:
/* All other completion status cause the IO to be complete. */
ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
@@ -1964,6 +2139,112 @@
return SCI_SUCCESS;
}
+static enum sci_status atapi_raw_completion(struct isci_request *ireq, u32 completion_code,
+ enum sci_base_request_states next)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, next);
+ break;
+ default:
+ /* All other completion status cause the IO to be complete.
+ * If a NAK was received, then it is up to the user to retry
+ * the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return status;
+}
+
+static enum sci_status atapi_data_tc_completion_handler(struct isci_request *ireq,
+ u32 completion_code)
+{
+ struct isci_remote_device *idev = ireq->target_device;
+ struct dev_to_host_fis *d2h = &ireq->stp.rsp;
+ enum sci_status status = SCI_SUCCESS;
+
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT):
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+
+ case (SCU_TASK_DONE_UNEXP_FIS << SCU_COMPLETION_TL_STATUS_SHIFT): {
+ u16 len = sci_req_tx_bytes(ireq);
+
+ /* likely non-error data underrrun, workaround missing
+ * d2h frame from the controller
+ */
+ if (d2h->fis_type != FIS_REGD2H) {
+ d2h->fis_type = FIS_REGD2H;
+ d2h->flags = (1 << 6);
+ d2h->status = 0x50;
+ d2h->error = 0;
+ d2h->lbal = 0;
+ d2h->byte_count_low = len & 0xff;
+ d2h->byte_count_high = len >> 8;
+ d2h->device = 0xa0;
+ d2h->lbal_exp = 0;
+ d2h->lbam_exp = 0;
+ d2h->lbah_exp = 0;
+ d2h->_r_a = 0;
+ d2h->sector_count = 0x3;
+ d2h->sector_count_exp = 0;
+ d2h->_r_b = 0;
+ d2h->_r_c = 0;
+ d2h->_r_d = 0;
+ }
+
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY;
+ status = ireq->sci_status;
+
+ /* the hw will have suspended the rnc, so complete the
+ * request upon pending resume
+ */
+ sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
+ break;
+ }
+ case (SCU_TASK_DONE_EXCESS_DATA << SCU_COMPLETION_TL_STATUS_SHIFT):
+ /* In this case, there is no UF coming after.
+ * compelte the IO now.
+ */
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+
+ default:
+ if (d2h->fis_type == FIS_REGD2H) {
+ /* UF received change the device state to ATAPI_ERROR */
+ status = ireq->sci_status;
+ sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
+ } else {
+ /* If receiving any non-sucess TC status, no UF
+ * received yet, then an UF for the status fis
+ * is coming after (XXX: suspect this is
+ * actually a protocol error or a bug like the
+ * DONE_UNEXP_FIS case)
+ */
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+
+ sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H);
+ }
+ break;
+ }
+
+ return status;
+}
+
enum sci_status
sci_io_request_tc_completion(struct isci_request *ireq,
u32 completion_code)
@@ -2015,6 +2296,17 @@
return request_aborting_state_tc_event(ireq,
completion_code);
+ case SCI_REQ_ATAPI_WAIT_H2D:
+ return atapi_raw_completion(ireq, completion_code,
+ SCI_REQ_ATAPI_WAIT_PIO_SETUP);
+
+ case SCI_REQ_ATAPI_WAIT_TC_COMP:
+ return atapi_raw_completion(ireq, completion_code,
+ SCI_REQ_ATAPI_WAIT_D2H);
+
+ case SCI_REQ_ATAPI_WAIT_D2H:
+ return atapi_data_tc_completion_handler(ireq, completion_code);
+
default:
dev_warn(&ihost->pdev->dev,
"%s: SCIC IO Request given task completion "
@@ -2421,6 +2713,8 @@
*/
if (fis->status & ATA_DF)
ts->stat = SAS_PROTO_RESPONSE;
+ else if (fis->status & ATA_ERR)
+ ts->stat = SAM_STAT_CHECK_CONDITION;
else
ts->stat = SAM_STAT_GOOD;
@@ -2603,18 +2897,7 @@
status = SAM_STAT_GOOD;
set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
- if (task->task_proto == SAS_PROTOCOL_SMP) {
- void *rsp = &request->smp.rsp;
-
- dev_dbg(&ihost->pdev->dev,
- "%s: SMP protocol completion\n",
- __func__);
-
- sg_copy_from_buffer(
- &task->smp_task.smp_resp, 1,
- rsp, sizeof(struct smp_resp));
- } else if (completion_status
- == SCI_IO_SUCCESS_IO_DONE_EARLY) {
+ if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) {
/* This was an SSP / STP / SATA transfer.
* There is a possibility that less data than
@@ -2791,6 +3074,7 @@
{
struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
struct domain_device *dev = ireq->target_device->domain_dev;
+ enum sci_base_request_states state;
struct sas_task *task;
/* XXX as hch said always creating an internal sas_task for tmf
@@ -2802,26 +3086,30 @@
* substates
*/
if (!task && dev->dev_type == SAS_END_DEV) {
- sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP);
+ state = SCI_REQ_TASK_WAIT_TC_COMP;
} else if (!task &&
(isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high ||
isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) {
- sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED);
+ state = SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED;
} else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
- sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP);
+ state = SCI_REQ_SMP_WAIT_RESP;
} else if (task && sas_protocol_ata(task->task_proto) &&
!task->ata_task.use_ncq) {
- u32 state;
-
- if (task->data_dir == DMA_NONE)
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET &&
+ task->ata_task.fis.command == ATA_CMD_PACKET) {
+ state = SCI_REQ_ATAPI_WAIT_H2D;
+ } else if (task->data_dir == DMA_NONE) {
state = SCI_REQ_STP_NON_DATA_WAIT_H2D;
- else if (task->ata_task.dma_xfer)
+ } else if (task->ata_task.dma_xfer) {
state = SCI_REQ_STP_UDMA_WAIT_TC_COMP;
- else /* PIO */
+ } else /* PIO */ {
state = SCI_REQ_STP_PIO_WAIT_H2D;
-
- sci_change_state(sm, state);
+ }
+ } else {
+ /* SSP or NCQ are fully accelerated, no substates */
+ return;
}
+ sci_change_state(sm, state);
}
static void sci_request_completed_state_enter(struct sci_base_state_machine *sm)
@@ -2913,6 +3201,10 @@
[SCI_REQ_TASK_WAIT_TC_RESP] = { },
[SCI_REQ_SMP_WAIT_RESP] = { },
[SCI_REQ_SMP_WAIT_TC_COMP] = { },
+ [SCI_REQ_ATAPI_WAIT_H2D] = { },
+ [SCI_REQ_ATAPI_WAIT_PIO_SETUP] = { },
+ [SCI_REQ_ATAPI_WAIT_D2H] = { },
+ [SCI_REQ_ATAPI_WAIT_TC_COMP] = { },
[SCI_REQ_COMPLETED] = {
.enter_state = sci_request_completed_state_enter,
},
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
index 7a1d5a9..f720b97 100644
--- a/drivers/scsi/isci/request.h
+++ b/drivers/scsi/isci/request.h
@@ -96,7 +96,6 @@
* to wait for another fis or if the transfer is complete. Upon
* receipt of a d2h fis this will be the status field of that fis.
* @sgl - track pio transfer progress as we iterate through the sgl
- * @device_cdb_len - atapi device advertises it's transfer constraints at setup
*/
struct isci_stp_request {
u32 pio_len;
@@ -107,7 +106,6 @@
u8 set;
u32 offset;
} sgl;
- u32 device_cdb_len;
};
struct isci_request {
@@ -174,9 +172,6 @@
};
} ssp;
struct {
- struct smp_resp rsp;
- } smp;
- struct {
struct isci_stp_request req;
struct host_to_dev_fis cmd;
struct dev_to_host_fis rsp;
@@ -252,6 +247,32 @@
SCI_REQ_STP_PIO_DATA_OUT,
/*
+ * While in this state the IO request object is waiting for the TC
+ * completion notification for the H2D Register FIS
+ */
+ SCI_REQ_ATAPI_WAIT_H2D,
+
+ /*
+ * While in this state the IO request object is waiting for either a
+ * PIO Setup.
+ */
+ SCI_REQ_ATAPI_WAIT_PIO_SETUP,
+
+ /*
+ * The non-data IO transit to this state in this state after receiving
+ * TC completion. While in this state IO request object is waiting for
+ * D2H status frame as UF.
+ */
+ SCI_REQ_ATAPI_WAIT_D2H,
+
+ /*
+ * When transmitting raw frames hardware reports task context completion
+ * after every frame submission, so in the non-accelerated case we need
+ * to expect the completion for the "cdb" frame.
+ */
+ SCI_REQ_ATAPI_WAIT_TC_COMP,
+
+ /*
* The AWAIT_TC_COMPLETION sub-state indicates that the started raw
* task management request is waiting for the transmission of the
* initial frame (i.e. command, task, etc.).
diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h
index 462b151..dc26b4a 100644
--- a/drivers/scsi/isci/sas.h
+++ b/drivers/scsi/isci/sas.h
@@ -204,8 +204,6 @@
u8 req_data[0];
} __packed;
-#define SMP_RESP_HDR_SZ 4
-
/*
* struct sci_sas_address - This structure depicts how a SAS address is
* represented by SCI.
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index d6bcdd0..e2d9418 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -1345,29 +1345,6 @@
complete(&task->completion);
}
-static struct sas_task *isci_alloc_task(void)
-{
- struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
-
- if (task) {
- INIT_LIST_HEAD(&task->list);
- spin_lock_init(&task->task_state_lock);
- task->task_state_flags = SAS_TASK_STATE_PENDING;
- init_timer(&task->timer);
- init_completion(&task->completion);
- }
-
- return task;
-}
-
-static void isci_free_task(struct isci_host *ihost, struct sas_task *task)
-{
- if (task) {
- BUG_ON(!list_empty(&task->list));
- kfree(task);
- }
-}
-
static int isci_smp_execute_task(struct isci_host *ihost,
struct domain_device *dev, void *req,
int req_size, void *resp, int resp_size)
@@ -1376,7 +1353,7 @@
struct sas_task *task = NULL;
for (retry = 0; retry < 3; retry++) {
- task = isci_alloc_task();
+ task = sas_alloc_task(GFP_KERNEL);
if (!task)
return -ENOMEM;
@@ -1439,13 +1416,13 @@
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat);
- isci_free_task(ihost, task);
+ sas_free_task(task);
task = NULL;
}
}
ex_err:
BUG_ON(retry == 3 && task != NULL);
- isci_free_task(ihost, task);
+ sas_free_task(task);
return res;
}
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index 4a7fa90..15b18d1 100644
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -286,6 +286,25 @@
task->task_status.resp = response;
task->task_status.stat = status;
+ switch (task->task_proto) {
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+
+ if (task_notification_selection
+ == isci_perform_error_io_completion) {
+ /* SATA/STP I/O has it's own means of scheduling device
+ * error handling on the normal path.
+ */
+ task_notification_selection
+ = isci_perform_normal_io_completion;
+ }
+ break;
+ default:
+ break;
+ }
+
switch (task_notification_selection) {
case isci_perform_error_io_completion:
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 7724414..23e7066 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -872,6 +872,61 @@
iscsi_host_free(shost);
}
+static mode_t iscsi_sw_tcp_attr_is_visible(int param_type, int param)
+{
+ switch (param_type) {
+ case ISCSI_HOST_PARAM:
+ switch (param) {
+ case ISCSI_HOST_PARAM_NETDEV_NAME:
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ case ISCSI_HOST_PARAM_IPADDRESS:
+ case ISCSI_HOST_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ case ISCSI_PARAM:
+ switch (param) {
+ case ISCSI_PARAM_MAX_RECV_DLENGTH:
+ case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+ case ISCSI_PARAM_HDRDGST_EN:
+ case ISCSI_PARAM_DATADGST_EN:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_EXP_STATSN:
+ case ISCSI_PARAM_PERSISTENT_ADDRESS:
+ case ISCSI_PARAM_PERSISTENT_PORT:
+ case ISCSI_PARAM_PING_TMO:
+ case ISCSI_PARAM_RECV_TMO:
+ case ISCSI_PARAM_INITIAL_R2T_EN:
+ case ISCSI_PARAM_MAX_R2T:
+ case ISCSI_PARAM_IMM_DATA_EN:
+ case ISCSI_PARAM_FIRST_BURST:
+ case ISCSI_PARAM_MAX_BURST:
+ case ISCSI_PARAM_PDU_INORDER_EN:
+ case ISCSI_PARAM_DATASEQ_INORDER_EN:
+ case ISCSI_PARAM_ERL:
+ case ISCSI_PARAM_TARGET_NAME:
+ case ISCSI_PARAM_TPGT:
+ case ISCSI_PARAM_USERNAME:
+ case ISCSI_PARAM_PASSWORD:
+ case ISCSI_PARAM_USERNAME_IN:
+ case ISCSI_PARAM_PASSWORD_IN:
+ case ISCSI_PARAM_FAST_ABORT:
+ case ISCSI_PARAM_ABORT_TMO:
+ case ISCSI_PARAM_LU_RESET_TMO:
+ case ISCSI_PARAM_TGT_RESET_TMO:
+ case ISCSI_PARAM_IFACE_NAME:
+ case ISCSI_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
static int iscsi_sw_tcp_slave_alloc(struct scsi_device *sdev)
{
set_bit(QUEUE_FLAG_BIDI, &sdev->request_queue->queue_flags);
@@ -910,33 +965,6 @@
.name = "tcp",
.caps = CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_HDRDGST
| CAP_DATADGST,
- .param_mask = ISCSI_MAX_RECV_DLENGTH |
- ISCSI_MAX_XMIT_DLENGTH |
- ISCSI_HDRDGST_EN |
- ISCSI_DATADGST_EN |
- ISCSI_INITIAL_R2T_EN |
- ISCSI_MAX_R2T |
- ISCSI_IMM_DATA_EN |
- ISCSI_FIRST_BURST |
- ISCSI_MAX_BURST |
- ISCSI_PDU_INORDER_EN |
- ISCSI_DATASEQ_INORDER_EN |
- ISCSI_ERL |
- ISCSI_CONN_PORT |
- ISCSI_CONN_ADDRESS |
- ISCSI_EXP_STATSN |
- ISCSI_PERSISTENT_PORT |
- ISCSI_PERSISTENT_ADDRESS |
- ISCSI_TARGET_NAME | ISCSI_TPGT |
- ISCSI_USERNAME | ISCSI_PASSWORD |
- ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
- ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
- ISCSI_PING_TMO | ISCSI_RECV_TMO |
- ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
- .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
- ISCSI_HOST_INITIATOR_NAME |
- ISCSI_HOST_NETDEV_NAME,
/* session management */
.create_session = iscsi_sw_tcp_session_create,
.destroy_session = iscsi_sw_tcp_session_destroy,
@@ -944,6 +972,7 @@
.create_conn = iscsi_sw_tcp_conn_create,
.bind_conn = iscsi_sw_tcp_conn_bind,
.destroy_conn = iscsi_sw_tcp_conn_destroy,
+ .attr_is_visible = iscsi_sw_tcp_attr_is_visible,
.set_param = iscsi_sw_tcp_conn_set_param,
.get_conn_param = iscsi_sw_tcp_conn_get_param,
.get_session_param = iscsi_session_get_param,
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index d261e98..7c055fd 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -65,16 +65,15 @@
* assigned range of exchanges to per cpu pool.
*/
struct fc_exch_pool {
+ spinlock_t lock;
+ struct list_head ex_list;
u16 next_index;
u16 total_exches;
/* two cache of free slot in exch array */
u16 left;
u16 right;
-
- spinlock_t lock;
- struct list_head ex_list;
-};
+} ____cacheline_aligned_in_smp;
/**
* struct fc_exch_mgr - The Exchange Manager (EM).
@@ -91,13 +90,13 @@
* It manages the allocation of exchange IDs.
*/
struct fc_exch_mgr {
+ struct fc_exch_pool *pool;
+ mempool_t *ep_pool;
enum fc_class class;
struct kref kref;
u16 min_xid;
u16 max_xid;
- mempool_t *ep_pool;
u16 pool_max_index;
- struct fc_exch_pool *pool;
/*
* currently exchange mgr stats are updated but not used.
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 4c41ee8..221875e 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -759,7 +759,6 @@
goto out;
if (fc_fcp_lock_pkt(fsp))
goto out;
- fsp->last_pkt_time = jiffies;
if (fh->fh_type == FC_TYPE_BLS) {
fc_fcp_abts_resp(fsp, fp);
@@ -1148,7 +1147,6 @@
rc = -1;
goto unlock;
}
- fsp->last_pkt_time = jiffies;
fsp->seq_ptr = seq;
fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 256a999..d7c76f2 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -3163,7 +3163,6 @@
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
- uint32_t value;
switch(param) {
case ISCSI_PARAM_FAST_ABORT:
@@ -3220,14 +3219,6 @@
case ISCSI_PARAM_ERL:
sscanf(buf, "%d", &session->erl);
break;
- case ISCSI_PARAM_IFMARKER_EN:
- sscanf(buf, "%d", &value);
- BUG_ON(value);
- break;
- case ISCSI_PARAM_OFMARKER_EN:
- sscanf(buf, "%d", &value);
- BUG_ON(value);
- break;
case ISCSI_PARAM_EXP_STATSN:
sscanf(buf, "%u", &conn->exp_statsn);
break;
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index f583193..54a5199 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -219,17 +219,20 @@
/* ---------- Device registration and unregistration ---------- */
-static inline void sas_unregister_common_dev(struct domain_device *dev)
+static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_device *dev)
{
sas_notify_lldd_dev_gone(dev);
if (!dev->parent)
dev->port->port_dev = NULL;
else
list_del_init(&dev->siblings);
+
+ spin_lock_irq(&port->dev_list_lock);
list_del_init(&dev->dev_list_node);
+ spin_unlock_irq(&port->dev_list_lock);
}
-void sas_unregister_dev(struct domain_device *dev)
+void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev)
{
if (dev->rphy) {
sas_remove_children(&dev->rphy->dev);
@@ -241,15 +244,15 @@
kfree(dev->ex_dev.ex_phy);
dev->ex_dev.ex_phy = NULL;
}
- sas_unregister_common_dev(dev);
+ sas_unregister_common_dev(port, dev);
}
void sas_unregister_domain_devices(struct asd_sas_port *port)
{
struct domain_device *dev, *n;
- list_for_each_entry_safe_reverse(dev,n,&port->dev_list,dev_list_node)
- sas_unregister_dev(dev);
+ list_for_each_entry_safe_reverse(dev, n, &port->dev_list, dev_list_node)
+ sas_unregister_dev(port, dev);
port->port->rphy = NULL;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 16ad97d..1b831c5 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -199,6 +199,8 @@
phy->virtual = dr->virtual;
phy->last_da_index = -1;
+ phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
+ phy->phy->identify.device_type = phy->attached_dev_type;
phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
phy->phy->identify.target_port_protocols = phy->attached_tproto;
phy->phy->identify.phy_identifier = phy_id;
@@ -329,6 +331,7 @@
dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+ dev->ex_dev.t2t_supp = rg->t2t_supp;
dev->ex_dev.conf_route_table = rg->conf_route_table;
dev->ex_dev.configuring = rg->configuring;
memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
@@ -751,7 +754,10 @@
out_list_del:
sas_rphy_free(child->rphy);
child->rphy = NULL;
+
+ spin_lock_irq(&parent->port->dev_list_lock);
list_del(&child->dev_list_node);
+ spin_unlock_irq(&parent->port->dev_list_lock);
out_free:
sas_port_delete(phy->port);
out_err:
@@ -1133,15 +1139,17 @@
};
struct domain_device *parent = child->parent;
- sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
- "has %c:%c routing link!\n",
+ sas_printk("%s ex %016llx (T2T supp:%d) phy 0x%x <--> %s ex %016llx "
+ "(T2T supp:%d) phy 0x%x has %c:%c routing link!\n",
ex_type[parent->dev_type],
SAS_ADDR(parent->sas_addr),
+ parent->ex_dev.t2t_supp,
parent_phy->phy_id,
ex_type[child->dev_type],
SAS_ADDR(child->sas_addr),
+ child->ex_dev.t2t_supp,
child_phy->phy_id,
ra_char[parent_phy->routing_attr],
@@ -1238,10 +1246,15 @@
sas_print_parent_topology_bug(child, parent_phy, child_phy);
res = -ENODEV;
}
- } else if (parent_phy->routing_attr == TABLE_ROUTING &&
- child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
- sas_print_parent_topology_bug(child, parent_phy, child_phy);
- res = -ENODEV;
+ } else if (parent_phy->routing_attr == TABLE_ROUTING) {
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
+ (child_phy->routing_attr == TABLE_ROUTING &&
+ child_ex->t2t_supp && parent_ex->t2t_supp)) {
+ /* All good */;
+ } else {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
}
break;
case FANOUT_DEV:
@@ -1729,7 +1742,7 @@
return res;
}
-static void sas_unregister_ex_tree(struct domain_device *dev)
+static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_device *dev)
{
struct expander_device *ex = &dev->ex_dev;
struct domain_device *child, *n;
@@ -1738,11 +1751,11 @@
child->gone = 1;
if (child->dev_type == EDGE_DEV ||
child->dev_type == FANOUT_DEV)
- sas_unregister_ex_tree(child);
+ sas_unregister_ex_tree(port, child);
else
- sas_unregister_dev(child);
+ sas_unregister_dev(port, child);
}
- sas_unregister_dev(dev);
+ sas_unregister_dev(port, dev);
}
static void sas_unregister_devs_sas_addr(struct domain_device *parent,
@@ -1759,9 +1772,9 @@
child->gone = 1;
if (child->dev_type == EDGE_DEV ||
child->dev_type == FANOUT_DEV)
- sas_unregister_ex_tree(child);
+ sas_unregister_ex_tree(parent->port, child);
else
- sas_unregister_dev(child);
+ sas_unregister_dev(parent->port, child);
break;
}
}
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index 04ad8dd..e1aa178 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -51,6 +51,91 @@
resp_data[15] = rphy->identify.target_port_protocols;
}
+/**
+ * to_sas_gpio_gp_bit - given the gpio frame data find the byte/bit position of 'od'
+ * @od: od bit to find
+ * @data: incoming bitstream (from frame)
+ * @index: requested data register index (from frame)
+ * @count: total number of registers in the bitstream (from frame)
+ * @bit: bit position of 'od' in the returned byte
+ *
+ * returns NULL if 'od' is not in 'data'
+ *
+ * From SFF-8485 v0.7:
+ * "In GPIO_TX[1], bit 0 of byte 3 contains the first bit (i.e., OD0.0)
+ * and bit 7 of byte 0 contains the 32nd bit (i.e., OD10.1).
+ *
+ * In GPIO_TX[2], bit 0 of byte 3 contains the 33rd bit (i.e., OD10.2)
+ * and bit 7 of byte 0 contains the 64th bit (i.e., OD21.0)."
+ *
+ * The general-purpose (raw-bitstream) RX registers have the same layout
+ * although 'od' is renamed 'id' for 'input data'.
+ *
+ * SFF-8489 defines the behavior of the LEDs in response to the 'od' values.
+ */
+static u8 *to_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count, u8 *bit)
+{
+ unsigned int reg;
+ u8 byte;
+
+ /* gp registers start at index 1 */
+ if (index == 0)
+ return NULL;
+
+ index--; /* make index 0-based */
+ if (od < index * 32)
+ return NULL;
+
+ od -= index * 32;
+ reg = od >> 5;
+
+ if (reg >= count)
+ return NULL;
+
+ od &= (1 << 5) - 1;
+ byte = 3 - (od >> 3);
+ *bit = od & ((1 << 3) - 1);
+
+ return &data[reg * 4 + byte];
+}
+
+int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
+{
+ u8 *byte;
+ u8 bit;
+
+ byte = to_sas_gpio_gp_bit(od, data, index, count, &bit);
+ if (!byte)
+ return -1;
+
+ return (*byte >> bit) & 1;
+}
+EXPORT_SYMBOL(try_test_sas_gpio_gp_bit);
+
+static int sas_host_smp_write_gpio(struct sas_ha_struct *sas_ha, u8 *resp_data,
+ u8 reg_type, u8 reg_index, u8 reg_count,
+ u8 *req_data)
+{
+ struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt);
+ int written;
+
+ if (i->dft->lldd_write_gpio == NULL) {
+ resp_data[2] = SMP_RESP_FUNC_UNK;
+ return 0;
+ }
+
+ written = i->dft->lldd_write_gpio(sas_ha, reg_type, reg_index,
+ reg_count, req_data);
+
+ if (written < 0) {
+ resp_data[2] = SMP_RESP_FUNC_FAILED;
+ written = 0;
+ } else
+ resp_data[2] = SMP_RESP_FUNC_ACC;
+
+ return written;
+}
+
static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data,
u8 phy_id)
{
@@ -230,9 +315,23 @@
/* Can't implement; hosts have no routes */
break;
- case SMP_WRITE_GPIO_REG:
- /* FIXME: need GPIO support in the transport class */
+ case SMP_WRITE_GPIO_REG: {
+ /* SFF-8485 v0.7 */
+ const int base_frame_size = 11;
+ int to_write = req_data[4];
+
+ if (blk_rq_bytes(req) < base_frame_size + to_write * 4 ||
+ req->resid_len < base_frame_size + to_write * 4) {
+ resp_data[2] = SMP_RESP_INV_FRM_LEN;
+ break;
+ }
+
+ to_write = sas_host_smp_write_gpio(sas_ha, resp_data, req_data[2],
+ req_data[3], to_write, &req_data[8]);
+ req->resid_len -= base_frame_size + to_write * 4;
+ rsp->resid_len -= 8;
break;
+ }
case SMP_CONF_ROUTE_INFO:
/* Can't implement; hosts have no routes */
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 2dc55343..d81c3b1 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -37,7 +37,32 @@
#include "../scsi_sas_internal.h"
-struct kmem_cache *sas_task_cache;
+static struct kmem_cache *sas_task_cache;
+
+struct sas_task *sas_alloc_task(gfp_t flags)
+{
+ struct sas_task *task = kmem_cache_zalloc(sas_task_cache, flags);
+
+ if (task) {
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+ }
+
+ return task;
+}
+EXPORT_SYMBOL_GPL(sas_alloc_task);
+
+void sas_free_task(struct sas_task *task)
+{
+ if (task) {
+ BUG_ON(!list_empty(&task->list));
+ kmem_cache_free(sas_task_cache, task);
+ }
+}
+EXPORT_SYMBOL_GPL(sas_free_task);
/*------------ SAS addr hash -----------*/
void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
@@ -152,10 +177,15 @@
static int sas_get_linkerrors(struct sas_phy *phy)
{
- if (scsi_is_sas_phy_local(phy))
- /* FIXME: we have no local phy stats
- * gathering at this time */
- return -EINVAL;
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ return i->dft->lldd_control_phy(asd_phy, PHY_FUNC_GET_EVENTS, NULL);
+ }
return sas_smp_get_phy_events(phy);
}
@@ -293,8 +323,7 @@
static int __init sas_class_init(void)
{
- sas_task_cache = kmem_cache_create("sas_task", sizeof(struct sas_task),
- 0, SLAB_HWCACHE_ALIGN, NULL);
+ sas_task_cache = KMEM_CACHE(sas_task, SLAB_HWCACHE_ALIGN);
if (!sas_task_cache)
return -ENOMEM;
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index eeba76c..b2c4a77 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -182,78 +182,55 @@
return 0;
}
-/**
- * sas_queuecommand -- Enqueue a command for processing
- * @parameters: See SCSI Core documentation
- *
- * Note: XXX: Remove the host unlock/lock pair when SCSI Core can
- * call us without holding an IRQ spinlock...
- */
-static int sas_queuecommand_lck(struct scsi_cmnd *cmd,
- void (*scsi_done)(struct scsi_cmnd *))
- __releases(host->host_lock)
- __acquires(dev->sata_dev.ap->lock)
- __releases(dev->sata_dev.ap->lock)
- __acquires(host->host_lock)
+int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
- int res = 0;
- struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct Scsi_Host *host = cmd->device->host;
struct sas_internal *i = to_sas_internal(host->transportt);
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct sas_task *task;
+ int res = 0;
- spin_unlock_irq(host->host_lock);
-
- {
- struct sas_ha_struct *sas_ha = dev->port->ha;
- struct sas_task *task;
-
- /* If the device fell off, no sense in issuing commands */
- if (dev->gone) {
- cmd->result = DID_BAD_TARGET << 16;
- scsi_done(cmd);
- goto out;
- }
-
- if (dev_is_sata(dev)) {
- unsigned long flags;
-
- spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
- res = ata_sas_queuecmd(cmd, dev->sata_dev.ap);
- spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags);
- goto out;
- }
-
- res = -ENOMEM;
- task = sas_create_task(cmd, dev, GFP_ATOMIC);
- if (!task)
- goto out;
-
- cmd->scsi_done = scsi_done;
- /* Queue up, Direct Mode or Task Collector Mode. */
- if (sas_ha->lldd_max_execute_num < 2)
- res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
- else
- res = sas_queue_up(task);
-
- /* Examine */
- if (res) {
- SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
- ASSIGN_SAS_TASK(cmd, NULL);
- sas_free_task(task);
- if (res == -SAS_QUEUE_FULL) {
- cmd->result = DID_SOFT_ERROR << 16; /* retry */
- res = 0;
- scsi_done(cmd);
- }
- goto out;
- }
+ /* If the device fell off, no sense in issuing commands */
+ if (dev->gone) {
+ cmd->result = DID_BAD_TARGET << 16;
+ goto out_done;
}
-out:
- spin_lock_irq(host->host_lock);
- return res;
-}
-DEF_SCSI_QCMD(sas_queuecommand)
+ if (dev_is_sata(dev)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
+ res = ata_sas_queuecmd(cmd, dev->sata_dev.ap);
+ spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags);
+ return res;
+ }
+
+ task = sas_create_task(cmd, dev, GFP_ATOMIC);
+ if (!task)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /* Queue up, Direct Mode or Task Collector Mode. */
+ if (sas_ha->lldd_max_execute_num < 2)
+ res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
+ else
+ res = sas_queue_up(task);
+
+ if (res)
+ goto out_free_task;
+ return 0;
+
+out_free_task:
+ SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+ ASSIGN_SAS_TASK(cmd, NULL);
+ sas_free_task(task);
+ if (res == -SAS_QUEUE_FULL)
+ cmd->result = DID_SOFT_ERROR << 16; /* retry */
+ else
+ cmd->result = DID_ERROR << 16;
+out_done:
+ cmd->scsi_done(cmd);
+ return 0;
+}
static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
{
@@ -784,8 +761,7 @@
return 0;
}
-#define SAS_DEF_QD 32
-#define SAS_MAX_QD 64
+#define SAS_DEF_QD 256
int sas_slave_configure(struct scsi_device *scsi_dev)
{
@@ -825,34 +801,41 @@
struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
if (dev_is_sata(dev))
- dev->sata_dev.ap->link.device[0].class = ATA_DEV_NONE;
+ sas_to_ata_dev(dev)->class = ATA_DEV_NONE;
}
-int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth,
- int reason)
+int sas_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
{
- int res = min(new_depth, SAS_MAX_QD);
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
- if (reason != SCSI_QDEPTH_DEFAULT)
+ if (dev_is_sata(dev))
+ return __ata_change_queue_depth(dev->sata_dev.ap, sdev, depth,
+ reason);
+
+ switch (reason) {
+ case SCSI_QDEPTH_DEFAULT:
+ case SCSI_QDEPTH_RAMP_UP:
+ if (!sdev->tagged_supported)
+ depth = 1;
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ break;
+ case SCSI_QDEPTH_QFULL:
+ scsi_track_queue_full(sdev, depth);
+ break;
+ default:
return -EOPNOTSUPP;
-
- if (scsi_dev->tagged_supported)
- scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
- res);
- else {
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
- sas_printk("device %llx LUN %x queue depth changed to 1\n",
- SAS_ADDR(dev->sas_addr),
- scsi_dev->lun);
- scsi_adjust_queue_depth(scsi_dev, 0, 1);
- res = 1;
}
- return res;
+ return depth;
}
int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)
{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+
+ if (dev_is_sata(dev))
+ return -EINVAL;
+
if (!scsi_dev->tagged_supported)
return 0;
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index c088a36..bb4c8e0 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -846,8 +846,24 @@
struct dentry *debug_hbqinfo;
struct dentry *debug_dumpHostSlim;
struct dentry *debug_dumpHBASlim;
- struct dentry *debug_dumpData; /* BlockGuard BPL*/
- struct dentry *debug_dumpDif; /* BlockGuard BPL*/
+ struct dentry *debug_dumpData; /* BlockGuard BPL */
+ struct dentry *debug_dumpDif; /* BlockGuard BPL */
+ struct dentry *debug_InjErrLBA; /* LBA to inject errors at */
+ struct dentry *debug_writeGuard; /* inject write guard_tag errors */
+ struct dentry *debug_writeApp; /* inject write app_tag errors */
+ struct dentry *debug_writeRef; /* inject write ref_tag errors */
+ struct dentry *debug_readApp; /* inject read app_tag errors */
+ struct dentry *debug_readRef; /* inject read ref_tag errors */
+
+ /* T10 DIF error injection */
+ uint32_t lpfc_injerr_wgrd_cnt;
+ uint32_t lpfc_injerr_wapp_cnt;
+ uint32_t lpfc_injerr_wref_cnt;
+ uint32_t lpfc_injerr_rapp_cnt;
+ uint32_t lpfc_injerr_rref_cnt;
+ sector_t lpfc_injerr_lba;
+#define LPFC_INJERR_LBA_OFF (sector_t)0xffffffffffffffff
+
struct dentry *debug_slow_ring_trc;
struct lpfc_debugfs_trc *slow_ring_trc;
atomic_t slow_ring_trc_cnt;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 2542f1f..4b0333e 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -52,6 +52,13 @@
#define LPFC_MIN_DEVLOSS_TMO 1
#define LPFC_MAX_DEVLOSS_TMO 255
+/*
+ * Write key size should be multiple of 4. If write key is changed
+ * make sure that library write key is also changed.
+ */
+#define LPFC_REG_WRITE_KEY_SIZE 4
+#define LPFC_REG_WRITE_KEY "EMLX"
+
/**
* lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
* @incr: integer to convert.
@@ -693,7 +700,7 @@
int rc;
if (!phba->cfg_enable_hba_reset)
- return -EIO;
+ return -EACCES;
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
@@ -742,9 +749,11 @@
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
-
int status = -EINVAL;
+ if (!phba->cfg_enable_hba_reset)
+ return -EACCES;
+
if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)
status = phba->lpfc_selective_reset(phba);
@@ -765,16 +774,21 @@
* Returns:
* zero for success
**/
-static int
+int
lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
{
- struct lpfc_register portstat_reg;
+ struct lpfc_register portstat_reg = {0};
int i;
-
+ msleep(100);
lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0);
+ /* verify if privilaged for the request operation */
+ if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) &&
+ !bf_get(lpfc_sliport_status_err, &portstat_reg))
+ return -EPERM;
+
/* wait for the SLI port firmware ready after firmware reset */
for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) {
msleep(10);
@@ -816,16 +830,13 @@
int rc;
if (!phba->cfg_enable_hba_reset)
- return -EIO;
+ return -EACCES;
if ((phba->sli_rev < LPFC_SLI_REV4) ||
(bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
LPFC_SLI_INTF_IF_TYPE_2))
return -EPERM;
- if (!pdev->is_physfn)
- return -EPERM;
-
/* Disable SR-IOV virtual functions if enabled */
if (phba->cfg_sriov_nr_virtfn) {
pci_disable_sriov(pdev);
@@ -858,7 +869,7 @@
rc = lpfc_sli4_pdev_status_reg_wait(phba);
if (rc)
- return -EIO;
+ return rc;
init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl,
@@ -984,7 +995,7 @@
if (!status)
return strlen(buf);
else
- return -EIO;
+ return status;
}
/**
@@ -3885,18 +3896,23 @@
if ((off + count) > FF_REG_AREA_SIZE)
return -ERANGE;
- if (count == 0) return 0;
+ if (count <= LPFC_REG_WRITE_KEY_SIZE)
+ return 0;
if (off % 4 || count % 4 || (unsigned long)buf % 4)
return -EINVAL;
- if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
+ /* This is to protect HBA registers from accidental writes. */
+ if (memcmp(buf, LPFC_REG_WRITE_KEY, LPFC_REG_WRITE_KEY_SIZE))
+ return -EINVAL;
+
+ if (!(vport->fc_flag & FC_OFFLINE_MODE))
return -EPERM;
- }
spin_lock_irq(&phba->hbalock);
- for (buf_off = 0; buf_off < count; buf_off += sizeof(uint32_t))
- writel(*((uint32_t *)(buf + buf_off)),
+ for (buf_off = 0; buf_off < count - LPFC_REG_WRITE_KEY_SIZE;
+ buf_off += sizeof(uint32_t))
+ writel(*((uint32_t *)(buf + buf_off + LPFC_REG_WRITE_KEY_SIZE)),
phba->ctrl_regs_memmap_p + off + buf_off);
spin_unlock_irq(&phba->hbalock);
@@ -4097,8 +4113,10 @@
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- int rc;
+ LPFC_MBOXQ_t *mboxq;
MAILBOX_t *pmb;
+ uint32_t mbox_tmo;
+ int rc;
if (off > MAILBOX_CMD_SIZE)
return -ERANGE;
@@ -4123,7 +4141,8 @@
if (off == 0 &&
phba->sysfs_mbox.state == SMBOX_WRITING &&
phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
- pmb = &phba->sysfs_mbox.mbox->u.mb;
+ mboxq = (LPFC_MBOXQ_t *)&phba->sysfs_mbox.mbox;
+ pmb = &mboxq->u.mb;
switch (pmb->mbxCommand) {
/* Offline only */
case MBX_INIT_LINK:
@@ -4233,9 +4252,8 @@
} else {
spin_unlock_irq(&phba->hbalock);
- rc = lpfc_sli_issue_mbox_wait (phba,
- phba->sysfs_mbox.mbox,
- lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
spin_lock_irq(&phba->hbalock);
}
@@ -4480,9 +4498,10 @@
spin_lock_irq(shost->host_lock);
- if ((vport->fc_flag & FC_FABRIC) ||
- ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
- (vport->fc_flag & FC_PUBLIC_LOOP)))
+ if ((vport->port_state > LPFC_FLOGI) &&
+ ((vport->fc_flag & FC_FABRIC) ||
+ ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
+ (vport->fc_flag & FC_PUBLIC_LOOP))))
node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);
else
/* fabric is local port if there is no F/FL_Port */
@@ -4555,9 +4574,17 @@
memset(hs, 0, sizeof (struct fc_host_statistics));
hs->tx_frames = pmb->un.varRdStatus.xmitFrameCnt;
- hs->tx_words = (pmb->un.varRdStatus.xmitByteCnt * 256);
+ /*
+ * The MBX_READ_STATUS returns tx_k_bytes which has to
+ * converted to words
+ */
+ hs->tx_words = (uint64_t)
+ ((uint64_t)pmb->un.varRdStatus.xmitByteCnt
+ * (uint64_t)256);
hs->rx_frames = pmb->un.varRdStatus.rcvFrameCnt;
- hs->rx_words = (pmb->un.varRdStatus.rcvByteCnt * 256);
+ hs->rx_words = (uint64_t)
+ ((uint64_t)pmb->un.varRdStatus.rcvByteCnt
+ * (uint64_t)256);
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
pmb->mbxCommand = MBX_READ_LNK_STAT;
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index a6db6ae..60f9534 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -209,7 +209,7 @@
void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_mbox_dev_check(struct lpfc_hba *);
-int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+int lpfc_mbox_tmo_val(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
void lpfc_init_vpi(struct lpfc_hba *, struct lpfcMboxq *, uint16_t);
@@ -451,3 +451,5 @@
/* functions to support SR-IOV */
int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int);
uint16_t lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *);
+int lpfc_sli4_queue_create(struct lpfc_hba *);
+void lpfc_sli4_queue_destroy(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 779b88e..707081d 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1856,6 +1856,9 @@
case 2:
c = 'B';
break;
+ case 3:
+ c = 'X';
+ break;
default:
c = 0;
break;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index a0424dd..2cd844f 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -996,6 +996,85 @@
return nbytes;
}
+static int
+lpfc_debugfs_dif_err_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t
+lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct dentry *dent = file->f_dentry;
+ struct lpfc_hba *phba = file->private_data;
+ char cbuf[16];
+ int cnt = 0;
+
+ if (dent == phba->debug_writeGuard)
+ cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wgrd_cnt);
+ else if (dent == phba->debug_writeApp)
+ cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt);
+ else if (dent == phba->debug_writeRef)
+ cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt);
+ else if (dent == phba->debug_readApp)
+ cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt);
+ else if (dent == phba->debug_readRef)
+ cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rref_cnt);
+ else if (dent == phba->debug_InjErrLBA)
+ cnt = snprintf(cbuf, 16, "0x%lx\n",
+ (unsigned long) phba->lpfc_injerr_lba);
+ else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0547 Unknown debugfs error injection entry\n");
+
+ return simple_read_from_buffer(buf, nbytes, ppos, &cbuf, cnt);
+}
+
+static ssize_t
+lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct dentry *dent = file->f_dentry;
+ struct lpfc_hba *phba = file->private_data;
+ char dstbuf[32];
+ unsigned long tmp;
+ int size;
+
+ memset(dstbuf, 0, 32);
+ size = (nbytes < 32) ? nbytes : 32;
+ if (copy_from_user(dstbuf, buf, size))
+ return 0;
+
+ if (strict_strtoul(dstbuf, 0, &tmp))
+ return 0;
+
+ if (dent == phba->debug_writeGuard)
+ phba->lpfc_injerr_wgrd_cnt = (uint32_t)tmp;
+ else if (dent == phba->debug_writeApp)
+ phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp;
+ else if (dent == phba->debug_writeRef)
+ phba->lpfc_injerr_wref_cnt = (uint32_t)tmp;
+ else if (dent == phba->debug_readApp)
+ phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp;
+ else if (dent == phba->debug_readRef)
+ phba->lpfc_injerr_rref_cnt = (uint32_t)tmp;
+ else if (dent == phba->debug_InjErrLBA)
+ phba->lpfc_injerr_lba = (sector_t)tmp;
+ else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0548 Unknown debugfs error injection entry\n");
+
+ return nbytes;
+}
+
+static int
+lpfc_debugfs_dif_err_release(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
/**
* lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
* @inode: The inode pointer that contains a vport pointer.
@@ -3380,6 +3459,16 @@
.release = lpfc_debugfs_dumpDataDif_release,
};
+#undef lpfc_debugfs_op_dif_err
+static const struct file_operations lpfc_debugfs_op_dif_err = {
+ .owner = THIS_MODULE,
+ .open = lpfc_debugfs_dif_err_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_debugfs_dif_err_read,
+ .write = lpfc_debugfs_dif_err_write,
+ .release = lpfc_debugfs_dif_err_release,
+};
+
#undef lpfc_debugfs_op_slow_ring_trc
static const struct file_operations lpfc_debugfs_op_slow_ring_trc = {
.owner = THIS_MODULE,
@@ -3788,6 +3877,74 @@
goto debug_failed;
}
+ /* Setup DIF Error Injections */
+ snprintf(name, sizeof(name), "InjErrLBA");
+ phba->debug_InjErrLBA =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_InjErrLBA) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0807 Cannot create debugfs InjErrLBA\n");
+ goto debug_failed;
+ }
+ phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+
+ snprintf(name, sizeof(name), "writeGuardInjErr");
+ phba->debug_writeGuard =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_writeGuard) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0802 Cannot create debugfs writeGuard\n");
+ goto debug_failed;
+ }
+
+ snprintf(name, sizeof(name), "writeAppInjErr");
+ phba->debug_writeApp =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_writeApp) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0803 Cannot create debugfs writeApp\n");
+ goto debug_failed;
+ }
+
+ snprintf(name, sizeof(name), "writeRefInjErr");
+ phba->debug_writeRef =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_writeRef) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0804 Cannot create debugfs writeRef\n");
+ goto debug_failed;
+ }
+
+ snprintf(name, sizeof(name), "readAppInjErr");
+ phba->debug_readApp =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_readApp) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0805 Cannot create debugfs readApp\n");
+ goto debug_failed;
+ }
+
+ snprintf(name, sizeof(name), "readRefInjErr");
+ phba->debug_readRef =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dif_err);
+ if (!phba->debug_readRef) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0806 Cannot create debugfs readApp\n");
+ goto debug_failed;
+ }
+
/* Setup slow ring trace */
if (lpfc_debugfs_max_slow_ring_trc) {
num = lpfc_debugfs_max_slow_ring_trc - 1;
@@ -4090,6 +4247,30 @@
debugfs_remove(phba->debug_dumpDif); /* dumpDif */
phba->debug_dumpDif = NULL;
}
+ if (phba->debug_InjErrLBA) {
+ debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */
+ phba->debug_InjErrLBA = NULL;
+ }
+ if (phba->debug_writeGuard) {
+ debugfs_remove(phba->debug_writeGuard); /* writeGuard */
+ phba->debug_writeGuard = NULL;
+ }
+ if (phba->debug_writeApp) {
+ debugfs_remove(phba->debug_writeApp); /* writeApp */
+ phba->debug_writeApp = NULL;
+ }
+ if (phba->debug_writeRef) {
+ debugfs_remove(phba->debug_writeRef); /* writeRef */
+ phba->debug_writeRef = NULL;
+ }
+ if (phba->debug_readApp) {
+ debugfs_remove(phba->debug_readApp); /* readApp */
+ phba->debug_readApp = NULL;
+ }
+ if (phba->debug_readRef) {
+ debugfs_remove(phba->debug_readRef); /* readRef */
+ phba->debug_readRef = NULL;
+ }
if (phba->slow_ring_trc) {
kfree(phba->slow_ring_trc);
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 023da0e..445826a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3386,7 +3386,14 @@
cmdiocb->context1 = NULL;
}
}
+
+ /*
+ * The driver received a LOGO from the rport and has ACK'd it.
+ * At this point, the driver is done so release the IOCB and
+ * remove the ndlp reference.
+ */
lpfc_els_free_iocb(phba, cmdiocb);
+ lpfc_nlp_put(ndlp);
return;
}
@@ -4082,9 +4089,6 @@
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- lpfc_nlp_put(ndlp);
- elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
- * it could be freed */
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
@@ -4166,6 +4170,11 @@
psli = &phba->sli;
cmdsize = oldiocb->iocb.unsli3.rcvsli3.acc_len;
+ /* The accumulated length can exceed the BPL_SIZE. For
+ * now, use this as the limit
+ */
+ if (cmdsize > LPFC_BPL_SIZE)
+ cmdsize = LPFC_BPL_SIZE;
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_DID, ELS_CMD_ACC);
if (!elsiocb)
@@ -4189,9 +4198,6 @@
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- lpfc_nlp_put(ndlp);
- elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
- * it could be freed */
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
@@ -7258,16 +7264,11 @@
icmd->un.elsreq64.myID = 0;
icmd->un.elsreq64.fl = 1;
- if ((phba->sli_rev == LPFC_SLI_REV4) &&
- (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
- LPFC_SLI_INTF_IF_TYPE_0)) {
- /* FDISC needs to be 1 for WQE VPI */
- elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1;
- elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ;
- /* Set the ulpContext to the vpi */
- elsiocb->iocb.ulpContext = phba->vpi_ids[vport->vpi];
- } else {
- /* For FDISC, Let FDISC rsp set the NPortID for this VPI */
+ /*
+ * SLI3 ports require a different context type value than SLI4.
+ * Catch SLI3 ports here and override the prep.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV3) {
icmd->ulpCt_h = 1;
icmd->ulpCt_l = 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 0b47adf..091f68e 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1412,7 +1412,7 @@
if (phba->pport->port_state != LPFC_FLOGI) {
phba->hba_flag |= FCF_RR_INPROG;
spin_unlock_irq(&phba->hbalock);
- lpfc_issue_init_vfi(phba->pport);
+ lpfc_initial_flogi(phba->pport);
return;
}
spin_unlock_irq(&phba->hbalock);
@@ -2646,7 +2646,9 @@
{
struct lpfc_vport *vport = mboxq->vport;
- if (mboxq->u.mb.mbxStatus && (mboxq->u.mb.mbxStatus != 0x4002)) {
+ /* VFI not supported on interface type 0, just do the flogi */
+ if (mboxq->u.mb.mbxStatus && (bf_get(lpfc_sli_intf_if_type,
+ &phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_IF_TYPE_0)) {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_MBOX,
"2891 Init VFI mailbox failed 0x%x\n",
@@ -2655,6 +2657,7 @@
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
return;
}
+
lpfc_initial_flogi(vport);
mempool_free(mboxq, phba->mbox_mem_pool);
return;
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 7f8003b..98d21521 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -41,6 +41,8 @@
* Or clear that bit field:
* bf_set(example_bit_field, &t1, 0);
*/
+#define bf_get_be32(name, ptr) \
+ ((be32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK)
#define bf_get_le32(name, ptr) \
((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK)
#define bf_get(name, ptr) \
@@ -678,7 +680,6 @@
#define lpfc_rq_doorbell_num_posted_SHIFT 16
#define lpfc_rq_doorbell_num_posted_MASK 0x3FFF
#define lpfc_rq_doorbell_num_posted_WORD word0
-#define LPFC_RQ_POST_BATCH 8 /* RQEs to post at one time */
#define lpfc_rq_doorbell_id_SHIFT 0
#define lpfc_rq_doorbell_id_MASK 0xFFFF
#define lpfc_rq_doorbell_id_WORD word0
@@ -784,6 +785,8 @@
#define LPFC_Q_CREATE_VERSION_2 2
#define LPFC_Q_CREATE_VERSION_1 1
#define LPFC_Q_CREATE_VERSION_0 0
+#define LPFC_OPCODE_VERSION_0 0
+#define LPFC_OPCODE_VERSION_1 1
} request;
struct {
uint32_t word6;
@@ -825,6 +828,7 @@
#define LPFC_EXTENT_VERSION_DEFAULT 0
/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_NA 0x0
#define LPFC_MBOX_SUBSYSTEM_COMMON 0x1
#define LPFC_MBOX_SUBSYSTEM_FCOE 0xC
@@ -835,25 +839,34 @@
#define HOST_ENDIAN_HIGH_WORD1 0xFF7856FF
/* Common Opcodes */
-#define LPFC_MBOX_OPCODE_CQ_CREATE 0x0C
-#define LPFC_MBOX_OPCODE_EQ_CREATE 0x0D
-#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15
-#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20
-#define LPFC_MBOX_OPCODE_NOP 0x21
-#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
-#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
-#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
-#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
-#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
-#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
-#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A
-#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B
-#define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT 0x9C
-#define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT 0x9D
-#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0
-#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4
-#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC
-#define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5
+#define LPFC_MBOX_OPCODE_NA 0x00
+#define LPFC_MBOX_OPCODE_CQ_CREATE 0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE 0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20
+#define LPFC_MBOX_OPCODE_NOP 0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
+#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
+#define LPFC_MBOX_OPCODE_GET_PORT_NAME 0x4D
+#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
+#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A
+#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B
+#define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT 0x9C
+#define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT 0x9D
+#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0
+#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4
+#define LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG 0xA5
+#define LPFC_MBOX_OPCODE_GET_PROFILE_LIST 0xA6
+#define LPFC_MBOX_OPCODE_SET_ACT_PROFILE 0xA8
+#define LPFC_MBOX_OPCODE_GET_FACTORY_PROFILE_CONFIG 0xA9
+#define LPFC_MBOX_OPCODE_READ_OBJECT 0xAB
+#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC
+#define LPFC_MBOX_OPCODE_READ_OBJECT_LIST 0xAD
+#define LPFC_MBOX_OPCODE_DELETE_OBJECT 0xAE
+#define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5
/* FCoE Opcodes */
#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE 0x01
@@ -867,6 +880,7 @@
#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A
#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B
#define LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF 0x10
+#define LPFC_MBOX_OPCODE_FCOE_SET_FCLINK_SETTINGS 0x21
#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE 0x22
#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK 0x23
@@ -1470,16 +1484,81 @@
uint32_t addr_lo;
uint32_t word2;
-#define lpfc_sli4_sge_offset_SHIFT 0 /* Offset of buffer - Not used*/
-#define lpfc_sli4_sge_offset_MASK 0x1FFFFFFF
+#define lpfc_sli4_sge_offset_SHIFT 0
+#define lpfc_sli4_sge_offset_MASK 0x07FFFFFF
#define lpfc_sli4_sge_offset_WORD word2
-#define lpfc_sli4_sge_last_SHIFT 31 /* Last SEG in the SGL sets
- this flag !! */
+#define lpfc_sli4_sge_type_SHIFT 27
+#define lpfc_sli4_sge_type_MASK 0x0000000F
+#define lpfc_sli4_sge_type_WORD word2
+#define LPFC_SGE_TYPE_DATA 0x0
+#define LPFC_SGE_TYPE_DIF 0x4
+#define LPFC_SGE_TYPE_LSP 0x5
+#define LPFC_SGE_TYPE_PEDIF 0x6
+#define LPFC_SGE_TYPE_PESEED 0x7
+#define LPFC_SGE_TYPE_DISEED 0x8
+#define LPFC_SGE_TYPE_ENC 0x9
+#define LPFC_SGE_TYPE_ATM 0xA
+#define LPFC_SGE_TYPE_SKIP 0xC
+#define lpfc_sli4_sge_last_SHIFT 31 /* Last SEG in the SGL sets it */
#define lpfc_sli4_sge_last_MASK 0x00000001
#define lpfc_sli4_sge_last_WORD word2
uint32_t sge_len;
};
+struct sli4_sge_diseed { /* SLI-4 */
+ uint32_t ref_tag;
+ uint32_t ref_tag_tran;
+
+ uint32_t word2;
+#define lpfc_sli4_sge_dif_apptran_SHIFT 0
+#define lpfc_sli4_sge_dif_apptran_MASK 0x0000FFFF
+#define lpfc_sli4_sge_dif_apptran_WORD word2
+#define lpfc_sli4_sge_dif_af_SHIFT 24
+#define lpfc_sli4_sge_dif_af_MASK 0x00000001
+#define lpfc_sli4_sge_dif_af_WORD word2
+#define lpfc_sli4_sge_dif_na_SHIFT 25
+#define lpfc_sli4_sge_dif_na_MASK 0x00000001
+#define lpfc_sli4_sge_dif_na_WORD word2
+#define lpfc_sli4_sge_dif_hi_SHIFT 26
+#define lpfc_sli4_sge_dif_hi_MASK 0x00000001
+#define lpfc_sli4_sge_dif_hi_WORD word2
+#define lpfc_sli4_sge_dif_type_SHIFT 27
+#define lpfc_sli4_sge_dif_type_MASK 0x0000000F
+#define lpfc_sli4_sge_dif_type_WORD word2
+#define lpfc_sli4_sge_dif_last_SHIFT 31 /* Last SEG in the SGL sets it */
+#define lpfc_sli4_sge_dif_last_MASK 0x00000001
+#define lpfc_sli4_sge_dif_last_WORD word2
+ uint32_t word3;
+#define lpfc_sli4_sge_dif_apptag_SHIFT 0
+#define lpfc_sli4_sge_dif_apptag_MASK 0x0000FFFF
+#define lpfc_sli4_sge_dif_apptag_WORD word3
+#define lpfc_sli4_sge_dif_bs_SHIFT 16
+#define lpfc_sli4_sge_dif_bs_MASK 0x00000007
+#define lpfc_sli4_sge_dif_bs_WORD word3
+#define lpfc_sli4_sge_dif_ai_SHIFT 19
+#define lpfc_sli4_sge_dif_ai_MASK 0x00000001
+#define lpfc_sli4_sge_dif_ai_WORD word3
+#define lpfc_sli4_sge_dif_me_SHIFT 20
+#define lpfc_sli4_sge_dif_me_MASK 0x00000001
+#define lpfc_sli4_sge_dif_me_WORD word3
+#define lpfc_sli4_sge_dif_re_SHIFT 21
+#define lpfc_sli4_sge_dif_re_MASK 0x00000001
+#define lpfc_sli4_sge_dif_re_WORD word3
+#define lpfc_sli4_sge_dif_ce_SHIFT 22
+#define lpfc_sli4_sge_dif_ce_MASK 0x00000001
+#define lpfc_sli4_sge_dif_ce_WORD word3
+#define lpfc_sli4_sge_dif_nr_SHIFT 23
+#define lpfc_sli4_sge_dif_nr_MASK 0x00000001
+#define lpfc_sli4_sge_dif_nr_WORD word3
+#define lpfc_sli4_sge_dif_oprx_SHIFT 24
+#define lpfc_sli4_sge_dif_oprx_MASK 0x0000000F
+#define lpfc_sli4_sge_dif_oprx_WORD word3
+#define lpfc_sli4_sge_dif_optx_SHIFT 28
+#define lpfc_sli4_sge_dif_optx_MASK 0x0000000F
+#define lpfc_sli4_sge_dif_optx_WORD word3
+/* optx and oprx use BG_OP_IN defines in lpfc_hw.h */
+};
+
struct fcf_record {
uint32_t max_rcv_size;
uint32_t fka_adv_period;
@@ -2019,6 +2098,15 @@
#define lpfc_mbx_rd_conf_extnts_inuse_MASK 0x00000001
#define lpfc_mbx_rd_conf_extnts_inuse_WORD word1
uint32_t word2;
+#define lpfc_mbx_rd_conf_lnk_numb_SHIFT 0
+#define lpfc_mbx_rd_conf_lnk_numb_MASK 0x0000003F
+#define lpfc_mbx_rd_conf_lnk_numb_WORD word2
+#define lpfc_mbx_rd_conf_lnk_type_SHIFT 6
+#define lpfc_mbx_rd_conf_lnk_type_MASK 0x00000003
+#define lpfc_mbx_rd_conf_lnk_type_WORD word2
+#define lpfc_mbx_rd_conf_lnk_ldv_SHIFT 8
+#define lpfc_mbx_rd_conf_lnk_ldv_MASK 0x00000001
+#define lpfc_mbx_rd_conf_lnk_ldv_WORD word2
#define lpfc_mbx_rd_conf_topology_SHIFT 24
#define lpfc_mbx_rd_conf_topology_MASK 0x000000FF
#define lpfc_mbx_rd_conf_topology_WORD word2
@@ -2552,8 +2640,152 @@
} u;
};
+struct lpfc_controller_attribute {
+ uint32_t version_string[8];
+ uint32_t manufacturer_name[8];
+ uint32_t supported_modes;
+ uint32_t word17;
+#define lpfc_cntl_attr_eprom_ver_lo_SHIFT 0
+#define lpfc_cntl_attr_eprom_ver_lo_MASK 0x000000ff
+#define lpfc_cntl_attr_eprom_ver_lo_WORD word17
+#define lpfc_cntl_attr_eprom_ver_hi_SHIFT 8
+#define lpfc_cntl_attr_eprom_ver_hi_MASK 0x000000ff
+#define lpfc_cntl_attr_eprom_ver_hi_WORD word17
+ uint32_t mbx_da_struct_ver;
+ uint32_t ep_fw_da_struct_ver;
+ uint32_t ncsi_ver_str[3];
+ uint32_t dflt_ext_timeout;
+ uint32_t model_number[8];
+ uint32_t description[16];
+ uint32_t serial_number[8];
+ uint32_t ip_ver_str[8];
+ uint32_t fw_ver_str[8];
+ uint32_t bios_ver_str[8];
+ uint32_t redboot_ver_str[8];
+ uint32_t driver_ver_str[8];
+ uint32_t flash_fw_ver_str[8];
+ uint32_t functionality;
+ uint32_t word105;
+#define lpfc_cntl_attr_max_cbd_len_SHIFT 0
+#define lpfc_cntl_attr_max_cbd_len_MASK 0x0000ffff
+#define lpfc_cntl_attr_max_cbd_len_WORD word105
+#define lpfc_cntl_attr_asic_rev_SHIFT 16
+#define lpfc_cntl_attr_asic_rev_MASK 0x000000ff
+#define lpfc_cntl_attr_asic_rev_WORD word105
+#define lpfc_cntl_attr_gen_guid0_SHIFT 24
+#define lpfc_cntl_attr_gen_guid0_MASK 0x000000ff
+#define lpfc_cntl_attr_gen_guid0_WORD word105
+ uint32_t gen_guid1_12[3];
+ uint32_t word109;
+#define lpfc_cntl_attr_gen_guid13_14_SHIFT 0
+#define lpfc_cntl_attr_gen_guid13_14_MASK 0x0000ffff
+#define lpfc_cntl_attr_gen_guid13_14_WORD word109
+#define lpfc_cntl_attr_gen_guid15_SHIFT 16
+#define lpfc_cntl_attr_gen_guid15_MASK 0x000000ff
+#define lpfc_cntl_attr_gen_guid15_WORD word109
+#define lpfc_cntl_attr_hba_port_cnt_SHIFT 24
+#define lpfc_cntl_attr_hba_port_cnt_MASK 0x000000ff
+#define lpfc_cntl_attr_hba_port_cnt_WORD word109
+ uint32_t word110;
+#define lpfc_cntl_attr_dflt_lnk_tmo_SHIFT 0
+#define lpfc_cntl_attr_dflt_lnk_tmo_MASK 0x0000ffff
+#define lpfc_cntl_attr_dflt_lnk_tmo_WORD word110
+#define lpfc_cntl_attr_multi_func_dev_SHIFT 24
+#define lpfc_cntl_attr_multi_func_dev_MASK 0x000000ff
+#define lpfc_cntl_attr_multi_func_dev_WORD word110
+ uint32_t word111;
+#define lpfc_cntl_attr_cache_valid_SHIFT 0
+#define lpfc_cntl_attr_cache_valid_MASK 0x000000ff
+#define lpfc_cntl_attr_cache_valid_WORD word111
+#define lpfc_cntl_attr_hba_status_SHIFT 8
+#define lpfc_cntl_attr_hba_status_MASK 0x000000ff
+#define lpfc_cntl_attr_hba_status_WORD word111
+#define lpfc_cntl_attr_max_domain_SHIFT 16
+#define lpfc_cntl_attr_max_domain_MASK 0x000000ff
+#define lpfc_cntl_attr_max_domain_WORD word111
+#define lpfc_cntl_attr_lnk_numb_SHIFT 24
+#define lpfc_cntl_attr_lnk_numb_MASK 0x0000003f
+#define lpfc_cntl_attr_lnk_numb_WORD word111
+#define lpfc_cntl_attr_lnk_type_SHIFT 30
+#define lpfc_cntl_attr_lnk_type_MASK 0x00000003
+#define lpfc_cntl_attr_lnk_type_WORD word111
+ uint32_t fw_post_status;
+ uint32_t hba_mtu[8];
+ uint32_t word121;
+ uint32_t reserved1[3];
+ uint32_t word125;
+#define lpfc_cntl_attr_pci_vendor_id_SHIFT 0
+#define lpfc_cntl_attr_pci_vendor_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_vendor_id_WORD word125
+#define lpfc_cntl_attr_pci_device_id_SHIFT 16
+#define lpfc_cntl_attr_pci_device_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_device_id_WORD word125
+ uint32_t word126;
+#define lpfc_cntl_attr_pci_subvdr_id_SHIFT 0
+#define lpfc_cntl_attr_pci_subvdr_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_subvdr_id_WORD word126
+#define lpfc_cntl_attr_pci_subsys_id_SHIFT 16
+#define lpfc_cntl_attr_pci_subsys_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_subsys_id_WORD word126
+ uint32_t word127;
+#define lpfc_cntl_attr_pci_bus_num_SHIFT 0
+#define lpfc_cntl_attr_pci_bus_num_MASK 0x000000ff
+#define lpfc_cntl_attr_pci_bus_num_WORD word127
+#define lpfc_cntl_attr_pci_dev_num_SHIFT 8
+#define lpfc_cntl_attr_pci_dev_num_MASK 0x000000ff
+#define lpfc_cntl_attr_pci_dev_num_WORD word127
+#define lpfc_cntl_attr_pci_fnc_num_SHIFT 16
+#define lpfc_cntl_attr_pci_fnc_num_MASK 0x000000ff
+#define lpfc_cntl_attr_pci_fnc_num_WORD word127
+#define lpfc_cntl_attr_inf_type_SHIFT 24
+#define lpfc_cntl_attr_inf_type_MASK 0x000000ff
+#define lpfc_cntl_attr_inf_type_WORD word127
+ uint32_t unique_id[2];
+ uint32_t word130;
+#define lpfc_cntl_attr_num_netfil_SHIFT 0
+#define lpfc_cntl_attr_num_netfil_MASK 0x000000ff
+#define lpfc_cntl_attr_num_netfil_WORD word130
+ uint32_t reserved2[4];
+};
+
+struct lpfc_mbx_get_cntl_attributes {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ struct lpfc_controller_attribute cntl_attr;
+};
+
+struct lpfc_mbx_get_port_name {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_get_port_name_lnk_type_SHIFT 0
+#define lpfc_mbx_get_port_name_lnk_type_MASK 0x00000003
+#define lpfc_mbx_get_port_name_lnk_type_WORD word4
+ } request;
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_get_port_name_name0_SHIFT 0
+#define lpfc_mbx_get_port_name_name0_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name0_WORD word4
+#define lpfc_mbx_get_port_name_name1_SHIFT 8
+#define lpfc_mbx_get_port_name_name1_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name1_WORD word4
+#define lpfc_mbx_get_port_name_name2_SHIFT 16
+#define lpfc_mbx_get_port_name_name2_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name2_WORD word4
+#define lpfc_mbx_get_port_name_name3_SHIFT 24
+#define lpfc_mbx_get_port_name_name3_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name3_WORD word4
+#define LPFC_LINK_NUMBER_0 0
+#define LPFC_LINK_NUMBER_1 1
+#define LPFC_LINK_NUMBER_2 2
+#define LPFC_LINK_NUMBER_3 3
+ } response;
+ } u;
+};
+
/* Mailbox Completion Queue Error Messages */
-#define MB_CQE_STATUS_SUCCESS 0x0
+#define MB_CQE_STATUS_SUCCESS 0x0
#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1
#define MB_CQE_STATUS_INVALID_PARAMETER 0x2
#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES 0x3
@@ -2637,8 +2869,9 @@
struct lpfc_mbx_run_link_diag_test link_diag_test;
struct lpfc_mbx_get_func_cfg get_func_cfg;
struct lpfc_mbx_get_prof_cfg get_prof_cfg;
- struct lpfc_mbx_nop nop;
struct lpfc_mbx_wr_object wr_object;
+ struct lpfc_mbx_get_port_name get_port_name;
+ struct lpfc_mbx_nop nop;
} un;
};
@@ -2855,6 +3088,9 @@
#define wqe_ctxt_tag_MASK 0x0000FFFF
#define wqe_ctxt_tag_WORD word6
uint32_t word7;
+#define wqe_dif_SHIFT 0
+#define wqe_dif_MASK 0x00000003
+#define wqe_dif_WORD word7
#define wqe_ct_SHIFT 2
#define wqe_ct_MASK 0x00000003
#define wqe_ct_WORD word7
@@ -2867,12 +3103,21 @@
#define wqe_class_SHIFT 16
#define wqe_class_MASK 0x00000007
#define wqe_class_WORD word7
+#define wqe_ar_SHIFT 19
+#define wqe_ar_MASK 0x00000001
+#define wqe_ar_WORD word7
+#define wqe_ag_SHIFT wqe_ar_SHIFT
+#define wqe_ag_MASK wqe_ar_MASK
+#define wqe_ag_WORD wqe_ar_WORD
#define wqe_pu_SHIFT 20
#define wqe_pu_MASK 0x00000003
#define wqe_pu_WORD word7
#define wqe_erp_SHIFT 22
#define wqe_erp_MASK 0x00000001
#define wqe_erp_WORD word7
+#define wqe_conf_SHIFT wqe_erp_SHIFT
+#define wqe_conf_MASK wqe_erp_MASK
+#define wqe_conf_WORD wqe_erp_WORD
#define wqe_lnk_SHIFT 23
#define wqe_lnk_MASK 0x00000001
#define wqe_lnk_WORD word7
@@ -2931,6 +3176,9 @@
#define wqe_xc_SHIFT 21
#define wqe_xc_MASK 0x00000001
#define wqe_xc_WORD word10
+#define wqe_sr_SHIFT 22
+#define wqe_sr_MASK 0x00000001
+#define wqe_sr_WORD word10
#define wqe_ccpe_SHIFT 23
#define wqe_ccpe_MASK 0x00000001
#define wqe_ccpe_WORD word10
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a3c8200..907c94b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -58,8 +58,7 @@
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
-static int lpfc_sli4_queue_create(struct lpfc_hba *);
-static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_sli4_queue_verify(struct lpfc_hba *);
static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
static int lpfc_setup_endian_order(struct lpfc_hba *);
static int lpfc_sli4_read_config(struct lpfc_hba *);
@@ -1438,6 +1437,7 @@
struct Scsi_Host *shost;
uint32_t if_type;
struct lpfc_register portstat_reg;
+ int rc;
/* If the pci channel is offline, ignore possible errors, since
* we cannot communicate with the pci card anyway.
@@ -1480,16 +1480,24 @@
lpfc_sli4_offline_eratt(phba);
return;
}
- if (bf_get(lpfc_sliport_status_rn, &portstat_reg)) {
- /*
- * TODO: Attempt port recovery via a port reset.
- * When fully implemented, the driver should
- * attempt to recover the port here and return.
- * For now, log an error and take the port offline.
- */
+ /*
+ * On error status condition, driver need to wait for port
+ * ready before performing reset.
+ */
+ rc = lpfc_sli4_pdev_status_reg_wait(phba);
+ if (!rc) {
+ /* need reset: attempt for port recovery */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2887 Port Error: Attempting "
"Port Recovery\n");
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_sli_brdrestart(phba);
+ if (lpfc_online(phba) == 0) {
+ lpfc_unblock_mgmt_io(phba);
+ return;
+ }
+ /* fall through for not able to recover */
}
lpfc_sli4_offline_eratt(phba);
break;
@@ -1724,11 +1732,20 @@
j = 0;
Length -= (3+i);
while(i--) {
- phba->Port[j++] = vpd[index++];
- if (j == 19)
- break;
+ if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ (phba->sli4_hba.pport_name_sta ==
+ LPFC_SLI4_PPNAME_GET)) {
+ j++;
+ index++;
+ } else
+ phba->Port[j++] = vpd[index++];
+ if (j == 19)
+ break;
}
- phba->Port[j] = 0;
+ if ((phba->sli_rev != LPFC_SLI_REV4) ||
+ (phba->sli4_hba.pport_name_sta ==
+ LPFC_SLI4_PPNAME_NON))
+ phba->Port[j] = 0;
continue;
}
else {
@@ -1958,7 +1975,7 @@
case PCI_DEVICE_ID_LANCER_FCOE:
case PCI_DEVICE_ID_LANCER_FCOE_VF:
oneConnect = 1;
- m = (typeof(m)){"OCe50100", "PCIe", "FCoE"};
+ m = (typeof(m)){"OCe15100", "PCIe", "FCoE"};
break;
default:
m = (typeof(m)){"Unknown", "", ""};
@@ -2432,17 +2449,19 @@
uint8_t actcmd = MBX_HEARTBEAT;
unsigned long timeout;
-
+ timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
spin_lock_irqsave(&phba->hbalock, iflag);
phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
- if (phba->sli.mbox_active)
+ if (phba->sli.mbox_active) {
actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
+ /* Determine how long we might wait for the active mailbox
+ * command to be gracefully completed by firmware.
+ */
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) * 1000) + jiffies;
+ }
spin_unlock_irqrestore(&phba->hbalock, iflag);
- /* Determine how long we might wait for the active mailbox
- * command to be gracefully completed by firmware.
- */
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
- jiffies;
+
/* Wait for the outstnading mailbox command to complete */
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
@@ -3949,7 +3968,7 @@
lpfc_enable_pci_dev(struct lpfc_hba *phba)
{
struct pci_dev *pdev;
- int bars;
+ int bars = 0;
/* Obtain PCI device reference */
if (!phba->pcidev)
@@ -3978,6 +3997,8 @@
out_disable_device:
pci_disable_device(pdev);
out_error:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1401 Failed to enable pci device, bars:x%x\n", bars);
return -ENODEV;
}
@@ -4051,9 +4072,6 @@
uint16_t nr_virtfn;
int pos;
- if (!pdev->is_physfn)
- return 0;
-
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
if (pos == 0)
return 0;
@@ -4474,15 +4492,15 @@
}
}
mempool_free(mboxq, phba->mbox_mem_pool);
- /* Create all the SLI4 queues */
- rc = lpfc_sli4_queue_create(phba);
+ /* Verify all the SLI4 queues */
+ rc = lpfc_sli4_queue_verify(phba);
if (rc)
goto out_free_bsmbx;
/* Create driver internal CQE event pool */
rc = lpfc_sli4_cq_event_pool_create(phba);
if (rc)
- goto out_destroy_queue;
+ goto out_free_bsmbx;
/* Initialize and populate the iocb list per host */
rc = lpfc_init_sgl_list(phba);
@@ -4516,14 +4534,21 @@
goto out_remove_rpi_hdrs;
}
- phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+ /*
+ * The cfg_fcp_eq_count can be zero whenever there is exactly one
+ * interrupt vector. This is not an error
+ */
+ if (phba->cfg_fcp_eq_count) {
+ phba->sli4_hba.fcp_eq_hdl =
+ kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
phba->cfg_fcp_eq_count), GFP_KERNEL);
- if (!phba->sli4_hba.fcp_eq_hdl) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2572 Failed allocate memory for fast-path "
- "per-EQ handle array\n");
- rc = -ENOMEM;
- goto out_free_fcf_rr_bmask;
+ if (!phba->sli4_hba.fcp_eq_hdl) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2572 Failed allocate memory for "
+ "fast-path per-EQ handle array\n");
+ rc = -ENOMEM;
+ goto out_free_fcf_rr_bmask;
+ }
}
phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
@@ -4567,8 +4592,6 @@
lpfc_free_sgl_list(phba);
out_destroy_cq_event_pool:
lpfc_sli4_cq_event_pool_destroy(phba);
-out_destroy_queue:
- lpfc_sli4_queue_destroy(phba);
out_free_bsmbx:
lpfc_destroy_bootstrap_mbox(phba);
out_free_mem:
@@ -4608,9 +4631,6 @@
/* Free the SCSI sgl management array */
kfree(phba->sli4_hba.lpfc_scsi_psb_array);
- /* Free the SLI4 queues */
- lpfc_sli4_queue_destroy(phba);
-
/* Free the completion queue EQ event pool */
lpfc_sli4_cq_event_release_all(phba);
lpfc_sli4_cq_event_pool_destroy(phba);
@@ -6139,24 +6159,21 @@
}
/**
- * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * lpfc_sli4_queue_verify - Verify and update EQ and CQ counts
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
- * operation. For each SLI4 queue type, the parameters such as queue entry
- * count (queue depth) shall be taken from the module parameter. For now,
- * we just use some constant number as place holder.
+ * This routine is invoked to check the user settable queue counts for EQs and
+ * CQs. after this routine is called the counts will be set to valid values that
+ * adhere to the constraints of the system's interrupt vectors and the port's
+ * queue resources.
*
* Return codes
* 0 - successful
* -ENOMEM - No available memory
- * -EIO - The mailbox failed to complete successfully.
**/
static int
-lpfc_sli4_queue_create(struct lpfc_hba *phba)
+lpfc_sli4_queue_verify(struct lpfc_hba *phba)
{
- struct lpfc_queue *qdesc;
- int fcp_eqidx, fcp_cqidx, fcp_wqidx;
int cfg_fcp_wq_count;
int cfg_fcp_eq_count;
@@ -6229,14 +6246,43 @@
/* The overall number of event queues used */
phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
- /*
- * Create Event Queues (EQs)
- */
-
/* Get EQ depth from module parameter, fake the default for now */
phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+ /* Get CQ depth from module parameter, fake the default for now */
+ phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+ phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+ return 0;
+out_error:
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ * 0 - sucessful
+ * -ENOMEM - No availble memory
+ * -EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+ struct lpfc_queue *qdesc;
+ int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+
+ /*
+ * Create Event Queues (EQs)
+ */
+
/* Create slow path event queue */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
phba->sli4_hba.eq_ecount);
@@ -6247,14 +6293,20 @@
}
phba->sli4_hba.sp_eq = qdesc;
- /* Create fast-path FCP Event Queue(s) */
- phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
- phba->cfg_fcp_eq_count), GFP_KERNEL);
- if (!phba->sli4_hba.fp_eq) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2576 Failed allocate memory for fast-path "
- "EQ record array\n");
- goto out_free_sp_eq;
+ /*
+ * Create fast-path FCP Event Queue(s). The cfg_fcp_eq_count can be
+ * zero whenever there is exactly one interrupt vector. This is not
+ * an error.
+ */
+ if (phba->cfg_fcp_eq_count) {
+ phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fp_eq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2576 Failed allocate memory for "
+ "fast-path EQ record array\n");
+ goto out_free_sp_eq;
+ }
}
for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
@@ -6271,10 +6323,6 @@
* Create Complete Queues (CQs)
*/
- /* Get CQ depth from module parameter, fake the default for now */
- phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
- phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
-
/* Create slow-path Mailbox Command Complete Queue */
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
phba->sli4_hba.cq_ecount);
@@ -6296,16 +6344,25 @@
phba->sli4_hba.els_cq = qdesc;
- /* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
- phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
- phba->cfg_fcp_eq_count), GFP_KERNEL);
+ /*
+ * Create fast-path FCP Completion Queue(s), one-to-one with FCP EQs.
+ * If there are no FCP EQs then create exactly one FCP CQ.
+ */
+ if (phba->cfg_fcp_eq_count)
+ phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count),
+ GFP_KERNEL);
+ else
+ phba->sli4_hba.fcp_cq = kzalloc(sizeof(struct lpfc_queue *),
+ GFP_KERNEL);
if (!phba->sli4_hba.fcp_cq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2577 Failed allocate memory for fast-path "
"CQ record array\n");
goto out_free_els_cq;
}
- for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ fcp_cqidx = 0;
+ do {
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
phba->sli4_hba.cq_ecount);
if (!qdesc) {
@@ -6315,7 +6372,7 @@
goto out_free_fcp_cq;
}
phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
- }
+ } while (++fcp_cqidx < phba->cfg_fcp_eq_count);
/* Create Mailbox Command Queue */
phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
@@ -6447,7 +6504,7 @@
* -ENOMEM - No available memory
* -EIO - The mailbox failed to complete successfully.
**/
-static void
+void
lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
{
int fcp_qidx;
@@ -6723,6 +6780,10 @@
"0540 Receive Queue not allocated\n");
goto out_destroy_fcp_wq;
}
+
+ lpfc_rq_adjust_repost(phba, phba->sli4_hba.hdr_rq, LPFC_ELS_HBQ);
+ lpfc_rq_adjust_repost(phba, phba->sli4_hba.dat_rq, LPFC_ELS_HBQ);
+
rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
phba->sli4_hba.els_cq, LPFC_USOL);
if (rc) {
@@ -6731,6 +6792,7 @@
"rc = 0x%x\n", rc);
goto out_destroy_fcp_wq;
}
+
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
"parent cq-id=%d\n",
@@ -6790,8 +6852,10 @@
/* Unset ELS complete queue */
lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
/* Unset FCP response complete queue */
- for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ fcp_qidx = 0;
+ do {
lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+ } while (++fcp_qidx < phba->cfg_fcp_eq_count);
/* Unset fast-path event queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
@@ -7040,10 +7104,11 @@
* the loop again.
*/
for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
+ msleep(10);
if (lpfc_readl(phba->sli4_hba.u.if_type2.
STATUSregaddr, ®_data.word0)) {
rc = -ENODEV;
- break;
+ goto out;
}
if (bf_get(lpfc_sliport_status_rdy, ®_data))
break;
@@ -7051,7 +7116,6 @@
reset_again++;
break;
}
- msleep(10);
}
/*
@@ -7065,11 +7129,6 @@
}
/* Detect any port errors. */
- if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
- ®_data.word0)) {
- rc = -ENODEV;
- break;
- }
if ((bf_get(lpfc_sliport_status_err, ®_data)) ||
(rdy_chk >= 1000)) {
phba->work_status[0] = readl(
@@ -7102,6 +7161,7 @@
break;
}
+out:
/* Catch the not-ready port failure after a port reset. */
if (num_resets >= MAX_IF_TYPE_2_RESETS)
rc = -ENODEV;
@@ -7149,12 +7209,13 @@
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
- else
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
if (rc == MBX_TIMEOUT)
break;
/* Check return status */
@@ -7974,6 +8035,7 @@
/* Reset SLI4 HBA FCoE function */
lpfc_pci_function_reset(phba);
+ lpfc_sli4_queue_destroy(phba);
return;
}
@@ -8087,6 +8149,7 @@
/* Reset SLI4 HBA FCoE function */
lpfc_pci_function_reset(phba);
+ lpfc_sli4_queue_destroy(phba);
/* Stop the SLI4 device port */
phba->pport->work_port_events = 0;
@@ -8120,7 +8183,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_PORT_CAPABILITIES);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
}
@@ -8182,6 +8245,7 @@
int rc;
struct lpfc_mqe *mqe = &mboxq->u.mqe;
struct lpfc_pc_sli4_params *sli4_params;
+ uint32_t mbox_tmo;
int length;
struct lpfc_sli4_parameters *mbx_sli4_parameters;
@@ -8200,9 +8264,10 @@
length, LPFC_SLI4_MBX_EMBED);
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
- else
- rc = lpfc_sli_issue_mbox_wait(phba, mboxq,
- lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG));
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
if (unlikely(rc))
return rc;
sli4_params = &phba->sli4_hba.pc_sli4_params;
@@ -8271,11 +8336,8 @@
/* Perform generic PCI device enabling operation */
error = lpfc_enable_pci_dev(phba);
- if (error) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1401 Failed to enable pci device.\n");
+ if (error)
goto out_free_phba;
- }
/* Set up SLI API function jump table for PCI-device group-0 HBAs */
error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
@@ -8322,6 +8384,9 @@
goto out_free_iocb_list;
}
+ /* Get the default values for Model Name and Description */
+ lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
/* Create SCSI host to the physical port */
error = lpfc_create_shost(phba);
if (error) {
@@ -8885,16 +8950,17 @@
uint32_t offset = 0, temp_offset = 0;
INIT_LIST_HEAD(&dma_buffer_list);
- if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) ||
- (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) ||
- (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) ||
- (image->size != fw->size)) {
+ if ((be32_to_cpu(image->magic_number) != LPFC_GROUP_OJECT_MAGIC_NUM) ||
+ (bf_get_be32(lpfc_grp_hdr_file_type, image) !=
+ LPFC_FILE_TYPE_GROUP) ||
+ (bf_get_be32(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) ||
+ (be32_to_cpu(image->size) != fw->size)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3022 Invalid FW image found. "
- "Magic:%d Type:%x ID:%x\n",
- image->magic_number,
- bf_get(lpfc_grp_hdr_file_type, image),
- bf_get(lpfc_grp_hdr_id, image));
+ "Magic:%x Type:%x ID:%x\n",
+ be32_to_cpu(image->magic_number),
+ bf_get_be32(lpfc_grp_hdr_file_type, image),
+ bf_get_be32(lpfc_grp_hdr_id, image));
return -EINVAL;
}
lpfc_decode_firmware_rev(phba, fwrev, 1);
@@ -8924,11 +8990,11 @@
while (offset < fw->size) {
temp_offset = offset;
list_for_each_entry(dmabuf, &dma_buffer_list, list) {
- if (offset + SLI4_PAGE_SIZE > fw->size) {
- temp_offset += fw->size - offset;
+ if (temp_offset + SLI4_PAGE_SIZE > fw->size) {
memcpy(dmabuf->virt,
fw->data + temp_offset,
- fw->size - offset);
+ fw->size - temp_offset);
+ temp_offset = fw->size;
break;
}
memcpy(dmabuf->virt, fw->data + temp_offset,
@@ -8984,7 +9050,6 @@
uint32_t cfg_mode, intr_mode;
int mcnt;
int adjusted_fcp_eq_count;
- int fcp_qidx;
const struct firmware *fw;
uint8_t file_name[16];
@@ -8995,11 +9060,8 @@
/* Perform generic PCI device enabling operation */
error = lpfc_enable_pci_dev(phba);
- if (error) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1409 Failed to enable pci device.\n");
+ if (error)
goto out_free_phba;
- }
/* Set up SLI API function jump table for PCI-device group-1 HBAs */
error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
@@ -9054,6 +9116,9 @@
goto out_free_iocb_list;
}
+ /* Get the default values for Model Name and Description */
+ lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
/* Create SCSI host to the physical port */
error = lpfc_create_shost(phba);
if (error) {
@@ -9093,16 +9158,6 @@
adjusted_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1;
else
adjusted_fcp_eq_count = phba->cfg_fcp_eq_count;
- /* Free unused EQs */
- for (fcp_qidx = adjusted_fcp_eq_count;
- fcp_qidx < phba->cfg_fcp_eq_count;
- fcp_qidx++) {
- lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
- /* do not delete the first fcp_cq */
- if (fcp_qidx)
- lpfc_sli4_queue_free(
- phba->sli4_hba.fcp_cq[fcp_qidx]);
- }
phba->cfg_fcp_eq_count = adjusted_fcp_eq_count;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
@@ -9285,6 +9340,7 @@
/* Disable interrupt from device */
lpfc_sli4_disable_intr(phba);
+ lpfc_sli4_queue_destroy(phba);
/* Save device state to PCI config space */
pci_save_state(pdev);
@@ -9414,6 +9470,7 @@
/* Disable interrupt and pci device */
lpfc_sli4_disable_intr(phba);
+ lpfc_sli4_queue_destroy(phba);
pci_disable_device(phba->pcidev);
/* Flush all driver's outstanding SCSI I/Os as we are to reset */
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index e3b790e..baf53e6 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -36,6 +36,7 @@
#define LOG_SECURITY 0x00008000 /* Security events */
#define LOG_EVENT 0x00010000 /* CT,TEMP,DUMP, logging */
#define LOG_FIP 0x00020000 /* FIP events */
+#define LOG_FCP_UNDER 0x00040000 /* FCP underruns errors */
#define LOG_ALL_MSG 0xffffffff /* LOG all messages */
#define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 83450cc..2ebc7d2 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1598,9 +1598,12 @@
* Timeout value to be used for the given mailbox command
**/
int
-lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
+lpfc_mbox_tmo_val(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
- switch (cmd) {
+ MAILBOX_t *mbox = &mboxq->u.mb;
+ uint8_t subsys, opcode;
+
+ switch (mbox->mbxCommand) {
case MBX_WRITE_NV: /* 0x03 */
case MBX_UPDATE_CFG: /* 0x1B */
case MBX_DOWN_LOAD: /* 0x1C */
@@ -1610,6 +1613,28 @@
case MBX_LOAD_EXP_ROM: /* 0x9C */
return LPFC_MBOX_TMO_FLASH_CMD;
case MBX_SLI4_CONFIG: /* 0x9b */
+ subsys = lpfc_sli_config_mbox_subsys_get(phba, mboxq);
+ opcode = lpfc_sli_config_mbox_opcode_get(phba, mboxq);
+ if (subsys == LPFC_MBOX_SUBSYSTEM_COMMON) {
+ switch (opcode) {
+ case LPFC_MBOX_OPCODE_READ_OBJECT:
+ case LPFC_MBOX_OPCODE_WRITE_OBJECT:
+ case LPFC_MBOX_OPCODE_READ_OBJECT_LIST:
+ case LPFC_MBOX_OPCODE_DELETE_OBJECT:
+ case LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG:
+ case LPFC_MBOX_OPCODE_GET_PROFILE_LIST:
+ case LPFC_MBOX_OPCODE_SET_ACT_PROFILE:
+ case LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG:
+ case LPFC_MBOX_OPCODE_GET_FACTORY_PROFILE_CONFIG:
+ return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO;
+ }
+ }
+ if (subsys == LPFC_MBOX_SUBSYSTEM_FCOE) {
+ switch (opcode) {
+ case LPFC_MBOX_OPCODE_FCOE_SET_FCLINK_SETTINGS:
+ return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO;
+ }
+ }
return LPFC_MBOX_SLI4_CONFIG_TMO;
}
return LPFC_MBOX_TMO;
@@ -1859,7 +1884,7 @@
}
/* Complete the initialization for the particular Opcode. */
- opcode = lpfc_sli4_mbox_opcode_get(phba, mbox);
+ opcode = lpfc_sli_config_mbox_opcode_get(phba, mbox);
switch (opcode) {
case LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT:
if (emb == LPFC_SLI4_MBX_EMBED)
@@ -1886,23 +1911,56 @@
}
/**
- * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * lpfc_sli_config_mbox_subsys_get - Get subsystem from a sli_config mbox cmd
* @phba: pointer to lpfc hba data structure.
- * @mbox: pointer to lpfc mbox command.
+ * @mbox: pointer to lpfc mbox command queue entry.
*
- * This routine gets the opcode from a SLI4 specific mailbox command for
- * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
- * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
- * returned.
+ * This routine gets the subsystem from a SLI4 specific SLI_CONFIG mailbox
+ * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if the
+ * sub-header is not present, subsystem LPFC_MBOX_SUBSYSTEM_NA (0x0) shall
+ * be returned.
**/
uint8_t
-lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+lpfc_sli_config_mbox_subsys_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
{
struct lpfc_mbx_sli4_config *sli4_cfg;
union lpfc_sli4_cfg_shdr *cfg_shdr;
if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
- return 0;
+ return LPFC_MBOX_SUBSYSTEM_NA;
+ sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+ /* For embedded mbox command, get opcode from embedded sub-header*/
+ if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+ cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+ return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request);
+ }
+
+ /* For non-embedded mbox command, get opcode from first dma page */
+ if (unlikely(!mbox->sge_array))
+ return LPFC_MBOX_SUBSYSTEM_NA;
+ cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+ return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_sli_config_mbox_opcode_get - Get opcode from a sli_config mbox cmd
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command queue entry.
+ *
+ * This routine gets the opcode from a SLI4 specific SLI_CONFIG mailbox
+ * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if
+ * the sub-header is not present, opcode LPFC_MBOX_OPCODE_NA (0x0) be
+ * returned.
+ **/
+uint8_t
+lpfc_sli_config_mbox_opcode_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+ struct lpfc_mbx_sli4_config *sli4_cfg;
+ union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+ if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+ return LPFC_MBOX_OPCODE_NA;
sli4_cfg = &mbox->u.mqe.un.sli4_config;
/* For embedded mbox command, get opcode from embedded sub-header*/
@@ -1913,7 +1971,7 @@
/* For non-embedded mbox command, get opcode from first dma page */
if (unlikely(!mbox->sge_array))
- return 0;
+ return LPFC_MBOX_OPCODE_NA;
cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index eadd241..5b8790b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -58,6 +58,13 @@
"SCSI_PROT_READ_PASS",
"SCSI_PROT_WRITE_PASS",
};
+
+struct scsi_dif_tuple {
+ __be16 guard_tag; /* Checksum */
+ __be16 app_tag; /* Opaque storage */
+ __be32 ref_tag; /* Target LBA or indirect LBA */
+};
+
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
@@ -1263,6 +1270,174 @@
return 0;
}
+static inline unsigned
+lpfc_cmd_blksize(struct scsi_cmnd *sc)
+{
+ return sc->device->sector_size;
+}
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+/*
+ * Given a scsi cmnd, determine the BlockGuard tags to be used with it
+ * @sc: The SCSI command to examine
+ * @reftag: (out) BlockGuard reference tag for transmitted data
+ * @apptag: (out) BlockGuard application tag for transmitted data
+ * @new_guard (in) Value to replace CRC with if needed
+ *
+ * Returns (1) if error injection was performed, (0) otherwise
+ */
+static int
+lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
+{
+ struct scatterlist *sgpe; /* s/g prot entry */
+ struct scatterlist *sgde; /* s/g data entry */
+ struct scsi_dif_tuple *src;
+ uint32_t op = scsi_get_prot_op(sc);
+ uint32_t blksize;
+ uint32_t numblks;
+ sector_t lba;
+ int rc = 0;
+
+ if (op == SCSI_PROT_NORMAL)
+ return 0;
+
+ lba = scsi_get_lba(sc);
+ if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
+ blksize = lpfc_cmd_blksize(sc);
+ numblks = (scsi_bufflen(sc) + blksize - 1) / blksize;
+
+ /* Make sure we have the right LBA if one is specified */
+ if ((phba->lpfc_injerr_lba < lba) ||
+ (phba->lpfc_injerr_lba >= (lba + numblks)))
+ return 0;
+ }
+
+ sgpe = scsi_prot_sglist(sc);
+ sgde = scsi_sglist(sc);
+
+ /* Should we change the Reference Tag */
+ if (reftag) {
+ /*
+ * If we are SCSI_PROT_WRITE_STRIP, the protection data is
+ * being stripped from the wire, thus it doesn't matter.
+ */
+ if ((op == SCSI_PROT_WRITE_PASS) ||
+ (op == SCSI_PROT_WRITE_INSERT)) {
+ if (phba->lpfc_injerr_wref_cnt) {
+
+ /* DEADBEEF will be the reftag on the wire */
+ *reftag = 0xDEADBEEF;
+ phba->lpfc_injerr_wref_cnt--;
+ phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ rc = 1;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9081 BLKGRD: Injecting reftag error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ }
+ } else {
+ if (phba->lpfc_injerr_rref_cnt) {
+ *reftag = 0xDEADBEEF;
+ phba->lpfc_injerr_rref_cnt--;
+ phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ rc = 1;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9076 BLKGRD: Injecting reftag error: "
+ "read lba x%lx\n", (unsigned long)lba);
+ }
+ }
+ }
+
+ /* Should we change the Application Tag */
+ if (apptag) {
+ /*
+ * If we are SCSI_PROT_WRITE_STRIP, the protection data is
+ * being stripped from the wire, thus it doesn't matter.
+ */
+ if ((op == SCSI_PROT_WRITE_PASS) ||
+ (op == SCSI_PROT_WRITE_INSERT)) {
+ if (phba->lpfc_injerr_wapp_cnt) {
+
+ /* DEAD will be the apptag on the wire */
+ *apptag = 0xDEAD;
+ phba->lpfc_injerr_wapp_cnt--;
+ phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ rc = 1;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9077 BLKGRD: Injecting apptag error: "
+ "write lba x%lx\n", (unsigned long)lba);
+ }
+ } else {
+ if (phba->lpfc_injerr_rapp_cnt) {
+ *apptag = 0xDEAD;
+ phba->lpfc_injerr_rapp_cnt--;
+ phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ rc = 1;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9078 BLKGRD: Injecting apptag error: "
+ "read lba x%lx\n", (unsigned long)lba);
+ }
+ }
+ }
+
+ /* Should we change the Guard Tag */
+
+ /*
+ * If we are SCSI_PROT_WRITE_INSERT, the protection data is
+ * being on the wire is being fully generated on the HBA.
+ * The host cannot change it or force an error.
+ */
+ if (((op == SCSI_PROT_WRITE_STRIP) ||
+ (op == SCSI_PROT_WRITE_PASS)) &&
+ phba->lpfc_injerr_wgrd_cnt) {
+ if (sgpe) {
+ src = (struct scsi_dif_tuple *)sg_virt(sgpe);
+ /*
+ * Just inject an error in the first
+ * prot block.
+ */
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9079 BLKGRD: Injecting guard error: "
+ "write lba x%lx oldGuard x%x refTag x%x\n",
+ (unsigned long)lba, src->guard_tag,
+ src->ref_tag);
+
+ src->guard_tag = (uint16_t)new_guard;
+ phba->lpfc_injerr_wgrd_cnt--;
+ phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ rc = 1;
+
+ } else {
+ blksize = lpfc_cmd_blksize(sc);
+ /*
+ * Jump past the first data block
+ * and inject an error in the
+ * prot data. The prot data is already
+ * embedded after the regular data.
+ */
+ src = (struct scsi_dif_tuple *)
+ (sg_virt(sgde) + blksize);
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9080 BLKGRD: Injecting guard error: "
+ "write lba x%lx oldGuard x%x refTag x%x\n",
+ (unsigned long)lba, src->guard_tag,
+ src->ref_tag);
+
+ src->guard_tag = (uint16_t)new_guard;
+ phba->lpfc_injerr_wgrd_cnt--;
+ phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+ rc = 1;
+ }
+ }
+ return rc;
+}
+#endif
+
/*
* Given a scsi cmnd, determine the BlockGuard opcodes to be used with it
* @sc: The SCSI command to examine
@@ -1341,18 +1516,6 @@
return ret;
}
-struct scsi_dif_tuple {
- __be16 guard_tag; /* Checksum */
- __be16 app_tag; /* Opaque storage */
- __be32 ref_tag; /* Target LBA or indirect LBA */
-};
-
-static inline unsigned
-lpfc_cmd_blksize(struct scsi_cmnd *sc)
-{
- return sc->device->sector_size;
-}
-
/*
* This function sets up buffer list for protection groups of
* type LPFC_PG_TYPE_NO_DIF
@@ -1401,6 +1564,11 @@
blksize = lpfc_cmd_blksize(sc);
reftag = scsi_get_lba(sc) & 0xffffffff;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ /* reftag is the only error we can inject here */
+ lpfc_bg_err_inject(phba, sc, &reftag, 0, 0);
+#endif
+
/* setup PDE5 with what we have */
pde5 = (struct lpfc_pde5 *) bpl;
memset(pde5, 0, sizeof(struct lpfc_pde5));
@@ -1532,6 +1700,11 @@
blksize = lpfc_cmd_blksize(sc);
reftag = scsi_get_lba(sc) & 0xffffffff;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ /* reftag / guard tag are the only errors we can inject here */
+ lpfc_bg_err_inject(phba, sc, &reftag, 0, 0xDEAD);
+#endif
+
split_offset = 0;
do {
/* setup PDE5 with what we have */
@@ -1671,7 +1844,6 @@
}
} while (!alldone);
-
out:
return num_bde;
@@ -2075,6 +2247,7 @@
else
bf_set(lpfc_sli4_sge_last, sgl, 0);
bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(dma_len);
dma_offset += dma_len;
@@ -2325,8 +2498,9 @@
}
lp = (uint32_t *)cmnd->sense_buffer;
- if (!scsi_status && (resp_info & RESID_UNDER))
- logit = LOG_FCP;
+ if (!scsi_status && (resp_info & RESID_UNDER) &&
+ vport->cfg_log_verbose & LOG_FCP_UNDER)
+ logit = LOG_FCP_UNDER;
lpfc_printf_vlog(vport, KERN_WARNING, logit,
"9024 FCP command x%x failed: x%x SNS x%x x%x "
@@ -2342,7 +2516,7 @@
if (resp_info & RESID_UNDER) {
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
- lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER,
"9025 FCP Read Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n",
be32_to_cpu(fcpcmd->fcpDl),
@@ -2449,6 +2623,7 @@
struct lpfc_fast_path_event *fast_path_evt;
struct Scsi_Host *shost;
uint32_t queue_depth, scsi_id;
+ uint32_t logit = LOG_FCP;
/* Sanity check on return of outstanding command */
if (!(lpfc_cmd->pCmd))
@@ -2470,16 +2645,22 @@
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
else if (lpfc_cmd->status >= IOSTAT_CNT)
lpfc_cmd->status = IOSTAT_DEFAULT;
-
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
- "9030 FCP cmd x%x failed <%d/%d> "
- "status: x%x result: x%x Data: x%x x%x\n",
- cmd->cmnd[0],
- cmd->device ? cmd->device->id : 0xffff,
- cmd->device ? cmd->device->lun : 0xffff,
- lpfc_cmd->status, lpfc_cmd->result,
- pIocbOut->iocb.ulpContext,
- lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
+ if (lpfc_cmd->status == IOSTAT_FCP_RSP_ERROR
+ && !lpfc_cmd->fcp_rsp->rspStatus3
+ && (lpfc_cmd->fcp_rsp->rspStatus2 & RESID_UNDER)
+ && !(phba->cfg_log_verbose & LOG_FCP_UNDER))
+ logit = 0;
+ else
+ logit = LOG_FCP | LOG_FCP_UNDER;
+ lpfc_printf_vlog(vport, KERN_WARNING, logit,
+ "9030 FCP cmd x%x failed <%d/%d> "
+ "status: x%x result: x%x Data: x%x x%x\n",
+ cmd->cmnd[0],
+ cmd->device ? cmd->device->id : 0xffff,
+ cmd->device ? cmd->device->lun : 0xffff,
+ lpfc_cmd->status, lpfc_cmd->result,
+ pIocbOut->iocb.ulpContext,
+ lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
switch (lpfc_cmd->status) {
case IOSTAT_FCP_RSP_ERROR:
@@ -3056,8 +3237,9 @@
}
ndlp = rdata->pnode;
- if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
- scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
+ if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
+ (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) ||
+ (phba->sli_rev == LPFC_SLI_REV4))) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
@@ -3691,9 +3873,9 @@
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
- ret = fc_block_scsi_eh(cmnd);
- if (ret)
- return ret;
+ status = fc_block_scsi_eh(cmnd);
+ if (status)
+ return status;
/*
* Since the driver manages a single bus device, reset all
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 8b799f0..4d4104f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -379,10 +379,10 @@
dq->host_index = ((dq->host_index + 1) % dq->entry_count);
/* Ring The Header Receive Queue Doorbell */
- if (!(hq->host_index % LPFC_RQ_POST_BATCH)) {
+ if (!(hq->host_index % hq->entry_repost)) {
doorbell.word0 = 0;
bf_set(lpfc_rq_doorbell_num_posted, &doorbell,
- LPFC_RQ_POST_BATCH);
+ hq->entry_repost);
bf_set(lpfc_rq_doorbell_id, &doorbell, hq->queue_id);
writel(doorbell.word0, hq->phba->sli4_hba.RQDBregaddr);
}
@@ -1864,7 +1864,7 @@
{
if (phba->sli_rev == LPFC_SLI_REV4)
return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
- lpfc_hbq_defs[qno]->entry_count);
+ lpfc_hbq_defs[qno]->entry_count);
else
return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
lpfc_hbq_defs[qno]->init_count);
@@ -2200,10 +2200,13 @@
/* Unknown mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
- "x%x (x%x) Cmpl\n",
+ "x%x (x%x/x%x) Cmpl\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, pmb));
+ lpfc_sli_config_mbox_subsys_get(phba,
+ pmb),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ pmb));
phba->link_state = LPFC_HBA_ERROR;
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
@@ -2215,17 +2218,19 @@
if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
/* Mbox cmd cmpl error - RETRYing */
lpfc_printf_log(phba, KERN_INFO,
- LOG_MBOX | LOG_SLI,
- "(%d):0305 Mbox cmd cmpl "
- "error - RETRYing Data: x%x "
- "(x%x) x%x x%x x%x\n",
- pmb->vport ? pmb->vport->vpi :0,
- pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba,
- pmb),
- pmbox->mbxStatus,
- pmbox->un.varWords[0],
- pmb->vport->port_state);
+ LOG_MBOX | LOG_SLI,
+ "(%d):0305 Mbox cmd cmpl "
+ "error - RETRYing Data: x%x "
+ "(x%x/x%x) x%x x%x x%x\n",
+ pmb->vport ? pmb->vport->vpi : 0,
+ pmbox->mbxCommand,
+ lpfc_sli_config_mbox_subsys_get(phba,
+ pmb),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ pmb),
+ pmbox->mbxStatus,
+ pmbox->un.varWords[0],
+ pmb->vport->port_state);
pmbox->mbxStatus = 0;
pmbox->mbxOwner = OWN_HOST;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
@@ -2236,11 +2241,12 @@
/* Mailbox cmd <cmd> Cmpl <cmpl> */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
+ "(%d):0307 Mailbox cmd x%x (x%x/x%x) Cmpl x%p "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, pmb),
+ lpfc_sli_config_mbox_subsys_get(phba, pmb),
+ lpfc_sli_config_mbox_opcode_get(phba, pmb),
pmb->mbox_cmpl,
*((uint32_t *) pmbox),
pmbox->un.varWords[0],
@@ -4686,6 +4692,175 @@
}
/**
+ * lpfc_sli4_retrieve_pport_name - Retrieve SLI4 device physical port name
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine retrieves SLI4 device physical port name this PCI function
+ * is attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * otherwise - failed to retrieve physical port name
+ **/
+static int
+lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_read_config *rd_config;
+ struct lpfc_mbx_get_cntl_attributes *mbx_cntl_attr;
+ struct lpfc_controller_attribute *cntl_attr;
+ struct lpfc_mbx_get_port_name *get_port_name;
+ void *virtaddr = NULL;
+ uint32_t alloclen, reqlen;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+ char cport_name = 0;
+ int rc;
+
+ /* We assume nothing at this point */
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_NON;
+
+ mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /* obtain link type and link number via READ_CONFIG */
+ lpfc_read_config(phba, mboxq);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc == MBX_SUCCESS) {
+ rd_config = &mboxq->u.mqe.un.rd_config;
+ if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) {
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
+ phba->sli4_hba.lnk_info.lnk_tp =
+ bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config);
+ phba->sli4_hba.lnk_info.lnk_no =
+ bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3081 lnk_type:%d, lnk_numb:%d\n",
+ phba->sli4_hba.lnk_info.lnk_tp,
+ phba->sli4_hba.lnk_info.lnk_no);
+ goto retrieve_ppname;
+ } else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3082 Mailbox (x%x) returned ldv:x0\n",
+ bf_get(lpfc_mqe_command,
+ &mboxq->u.mqe));
+ } else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3083 Mailbox (x%x) failed, status:x%x\n",
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+
+ /* obtain link type and link number via COMMON_GET_CNTL_ATTRIBUTES */
+ reqlen = sizeof(struct lpfc_mbx_get_cntl_attributes);
+ alloclen = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES, reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3084 Allocated DMA memory size (%d) is "
+ "less than the requested DMA memory size "
+ "(%d)\n", alloclen, reqlen);
+ rc = -ENOMEM;
+ goto out_free_mboxq;
+ }
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ virtaddr = mboxq->sge_array->addr[0];
+ mbx_cntl_attr = (struct lpfc_mbx_get_cntl_attributes *)virtaddr;
+ shdr = &mbx_cntl_attr->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3085 Mailbox x%x (x%x/x%x) failed, "
+ "rc:x%x, status:x%x, add_status:x%x\n",
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+ rc, shdr_status, shdr_add_status);
+ rc = -ENXIO;
+ goto out_free_mboxq;
+ }
+ cntl_attr = &mbx_cntl_attr->cntl_attr;
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
+ phba->sli4_hba.lnk_info.lnk_tp =
+ bf_get(lpfc_cntl_attr_lnk_type, cntl_attr);
+ phba->sli4_hba.lnk_info.lnk_no =
+ bf_get(lpfc_cntl_attr_lnk_numb, cntl_attr);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3086 lnk_type:%d, lnk_numb:%d\n",
+ phba->sli4_hba.lnk_info.lnk_tp,
+ phba->sli4_hba.lnk_info.lnk_no);
+
+retrieve_ppname:
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_PORT_NAME,
+ sizeof(struct lpfc_mbx_get_port_name) -
+ sizeof(struct lpfc_sli4_cfg_mhdr),
+ LPFC_SLI4_MBX_EMBED);
+ get_port_name = &mboxq->u.mqe.un.get_port_name;
+ shdr = (union lpfc_sli4_cfg_shdr *)&get_port_name->header.cfg_shdr;
+ bf_set(lpfc_mbox_hdr_version, &shdr->request, LPFC_OPCODE_VERSION_1);
+ bf_set(lpfc_mbx_get_port_name_lnk_type, &get_port_name->u.request,
+ phba->sli4_hba.lnk_info.lnk_tp);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3087 Mailbox x%x (x%x/x%x) failed: "
+ "rc:x%x, status:x%x, add_status:x%x\n",
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+ rc, shdr_status, shdr_add_status);
+ rc = -ENXIO;
+ goto out_free_mboxq;
+ }
+ switch (phba->sli4_hba.lnk_info.lnk_no) {
+ case LPFC_LINK_NUMBER_0:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name0,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ case LPFC_LINK_NUMBER_1:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name1,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ case LPFC_LINK_NUMBER_2:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name2,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ case LPFC_LINK_NUMBER_3:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name3,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ default:
+ break;
+ }
+
+ if (phba->sli4_hba.pport_name_sta == LPFC_SLI4_PPNAME_GET) {
+ phba->Port[0] = cport_name;
+ phba->Port[1] = '\0';
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3091 SLI get port name: %s\n", phba->Port);
+ }
+
+out_free_mboxq:
+ if (rc != MBX_TIMEOUT) {
+ if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ else
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ }
+ return rc;
+}
+
+/**
* lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
* @phba: pointer to lpfc hba data structure.
*
@@ -4754,7 +4929,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (unlikely(rc)) {
@@ -4911,7 +5086,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
@@ -5194,7 +5369,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, mbox_tmo);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
if (unlikely(rc)) {
@@ -5619,7 +5794,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
@@ -5748,6 +5923,17 @@
kfree(vpd);
goto out_free_mbox;
}
+
+ /*
+ * Retrieve sli4 device physical port name, failure of doing it
+ * is considered as non-fatal.
+ */
+ rc = lpfc_sli4_retrieve_pport_name(phba);
+ if (!rc)
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "3080 Successful retrieving SLI4 device "
+ "physical port name: %s.\n", phba->Port);
+
/*
* Evaluate the read rev and vpd data. Populate the driver
* state with the results. If this routine fails, the failure
@@ -5818,9 +6004,13 @@
* then turn off the global config parameters to disable the
* feature in the driver. This is not a fatal error.
*/
- if ((phba->cfg_enable_bg) &&
- !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
- ftr_rsp++;
+ phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
+ if (phba->cfg_enable_bg) {
+ if (bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs))
+ phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
+ else
+ ftr_rsp++;
+ }
if (phba->max_vpi && phba->cfg_enable_npiv &&
!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
@@ -5937,12 +6127,20 @@
goto out_free_mbox;
}
+ /* Create all the SLI4 queues */
+ rc = lpfc_sli4_queue_create(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3089 Failed to allocate queues\n");
+ rc = -ENODEV;
+ goto out_stop_timers;
+ }
/* Set up all the queues to the device */
rc = lpfc_sli4_queue_setup(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0381 Error %d during queue setup.\n ", rc);
- goto out_stop_timers;
+ goto out_destroy_queue;
}
/* Arm the CQs and then EQs on device */
@@ -6015,15 +6213,20 @@
spin_lock_irq(&phba->hbalock);
phba->link_state = LPFC_LINK_DOWN;
spin_unlock_irq(&phba->hbalock);
- if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK)
+ if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK) {
rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+ if (rc)
+ goto out_unset_queue;
+ }
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return rc;
out_unset_queue:
/* Unset all the queues set up in this routine when error out */
- if (rc)
- lpfc_sli4_queue_unset(phba);
+ lpfc_sli4_queue_unset(phba);
+out_destroy_queue:
+ lpfc_sli4_queue_destroy(phba);
out_stop_timers:
- if (rc)
- lpfc_stop_hba_timers(phba);
+ lpfc_stop_hba_timers(phba);
out_free_mbox:
mempool_free(mboxq, phba->mbox_mem_pool);
return rc;
@@ -6318,7 +6521,7 @@
}
/* timeout active mbox command */
mod_timer(&psli->mbox_tmo, (jiffies +
- (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
+ (HZ * lpfc_mbox_tmo_val(phba, pmbox))));
}
/* Mailbox cmd <cmd> issue */
@@ -6442,9 +6645,8 @@
drvr_flag);
goto out_not_finished;
}
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- mb->mbxCommand) *
- 1000) + jiffies;
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
+ 1000) + jiffies;
i = 0;
/* Wait for command to complete */
while (((word0 & OWN_CHIP) == OWN_CHIP) ||
@@ -6555,21 +6757,21 @@
lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- uint8_t actcmd = MBX_HEARTBEAT;
int rc = 0;
- unsigned long timeout;
+ unsigned long timeout = 0;
/* Mark the asynchronous mailbox command posting as blocked */
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
- if (phba->sli.mbox_active)
- actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
- spin_unlock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
- jiffies;
+ if (phba->sli.mbox_active)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) *
+ 1000) + jiffies;
+ spin_unlock_irq(&phba->hbalock);
+
/* Wait for the outstnading mailbox command to complete */
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
@@ -6664,11 +6866,12 @@
if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
spin_unlock_irqrestore(&phba->hbalock, iflag);
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2532 Mailbox command x%x (x%x) "
+ "(%d):2532 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, MBX_POLL);
return MBXERR_ERROR;
}
@@ -6691,7 +6894,7 @@
dma_address = &phba->sli4_hba.bmbx.dma_address;
writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
* 1000) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
@@ -6707,7 +6910,7 @@
/* Post the low mailbox dma address to the port. */
writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
* 1000) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
@@ -6746,11 +6949,12 @@
lpfc_sli4_swap_str(phba, mboxq);
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+ "(%d):0356 Mailbox cmd x%x (x%x/x%x) Status x%x "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
" x%x x%x CQ: x%x x%x x%x x%x\n",
- mboxq->vport ? mboxq->vport->vpi : 0,
- mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
bf_get(lpfc_mqe_status, mb),
mb->un.mb_words[0], mb->un.mb_words[1],
mb->un.mb_words[2], mb->un.mb_words[3],
@@ -6796,11 +7000,12 @@
rc = lpfc_mbox_dev_check(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2544 Mailbox command x%x (x%x) "
+ "(%d):2544 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
@@ -6814,20 +7019,25 @@
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2541 Mailbox command x%x "
- "(x%x) cannot issue Data: x%x x%x\n",
+ "(x%x/x%x) cannot issue Data: "
+ "x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba,
+ mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ mboxq),
psli->sli_flag, flag);
return rc;
} else if (flag == MBX_POLL) {
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
"(%d):2542 Try to issue mailbox command "
- "x%x (x%x) synchronously ahead of async"
+ "x%x (x%x/x%x) synchronously ahead of async"
"mailbox command queue: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
/* Try to block the asynchronous mailbox posting */
rc = lpfc_sli4_async_mbox_block(phba);
@@ -6836,16 +7046,18 @@
rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_ERR,
- LOG_MBOX | LOG_SLI,
- "(%d):2597 Mailbox command "
- "x%x (x%x) cannot issue "
- "Data: x%x x%x\n",
- mboxq->vport ?
- mboxq->vport->vpi : 0,
- mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba,
- mboxq),
- psli->sli_flag, flag);
+ LOG_MBOX | LOG_SLI,
+ "(%d):2597 Mailbox command "
+ "x%x (x%x/x%x) cannot issue "
+ "Data: x%x x%x\n",
+ mboxq->vport ?
+ mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli_config_mbox_subsys_get(phba,
+ mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba,
+ mboxq),
+ psli->sli_flag, flag);
/* Unblock the async mailbox posting afterward */
lpfc_sli4_async_mbox_unblock(phba);
}
@@ -6856,11 +7068,12 @@
rc = lpfc_mbox_cmd_check(phba, mboxq);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2543 Mailbox command x%x (x%x) "
+ "(%d):2543 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
@@ -6872,10 +7085,11 @@
spin_unlock_irqrestore(&phba->hbalock, iflags);
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
"(%d):0354 Mbox cmd issue - Enqueue Data: "
- "x%x (x%x) x%x x%x x%x\n",
+ "x%x (x%x/x%x) x%x x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0xffffff,
bf_get(lpfc_mqe_command, &mboxq->u.mqe),
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
phba->pport->port_state,
psli->sli_flag, MBX_NOWAIT);
/* Wake up worker thread to transport mailbox command from head */
@@ -6952,13 +7166,14 @@
/* Start timer for the mbox_tmo and log some mailbox post messages */
mod_timer(&psli->mbox_tmo, (jiffies +
- (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+ (HZ * lpfc_mbox_tmo_val(phba, mboxq))));
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+ "(%d):0355 Mailbox cmd x%x (x%x/x%x) issue Data: "
"x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
phba->pport->port_state, psli->sli_flag);
if (mbx_cmnd != MBX_HEARTBEAT) {
@@ -6982,11 +7197,12 @@
rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "(%d):2533 Mailbox command x%x (x%x) "
+ "(%d):2533 Mailbox command x%x (x%x/x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
- lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
psli->sli_flag, MBX_NOWAIT);
goto out_not_finished;
}
@@ -7322,6 +7538,8 @@
if (inbound == 1)
offset = 0;
bf_set(lpfc_sli4_sge_offset, sgl, offset);
+ bf_set(lpfc_sli4_sge_type, sgl,
+ LPFC_SGE_TYPE_DATA);
offset += bde.tus.f.bdeSize;
}
sgl->word2 = cpu_to_le32(sgl->word2);
@@ -9359,7 +9577,6 @@
/* now issue the command */
retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
-
if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
wait_event_interruptible_timeout(done_q,
pmboxq->mbox_flag & LPFC_MBX_WAKE,
@@ -9403,23 +9620,24 @@
lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- uint8_t actcmd = MBX_HEARTBEAT;
unsigned long timeout;
+ timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
spin_unlock_irq(&phba->hbalock);
if (psli->sli_flag & LPFC_SLI_ACTIVE) {
spin_lock_irq(&phba->hbalock);
- if (phba->sli.mbox_active)
- actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
- spin_unlock_irq(&phba->hbalock);
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
- 1000) + jiffies;
+ if (phba->sli.mbox_active)
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active) *
+ 1000) + jiffies;
+ spin_unlock_irq(&phba->hbalock);
+
while (phba->sli.mbox_active) {
/* Check active mailbox complete status every 2ms */
msleep(2);
@@ -10415,12 +10633,17 @@
/* Move mbox data to caller's mailbox region, do endian swapping */
if (pmb->mbox_cmpl && mbox)
lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
- /* Set the mailbox status with SLI4 range 0x4000 */
- mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
- if (mcqe_status != MB_CQE_STATUS_SUCCESS)
- bf_set(lpfc_mqe_status, mqe,
- (LPFC_MBX_ERROR_RANGE | mcqe_status));
+ /*
+ * For mcqe errors, conditionally move a modified error code to
+ * the mbox so that the error will not be missed.
+ */
+ mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+ if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+ if (bf_get(lpfc_mqe_status, mqe) == MBX_SUCCESS)
+ bf_set(lpfc_mqe_status, mqe,
+ (LPFC_MBX_ERROR_RANGE | mcqe_status));
+ }
if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
@@ -10796,7 +11019,7 @@
case LPFC_MCQ:
while ((cqe = lpfc_sli4_cq_get(cq))) {
workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
- if (!(++ecount % LPFC_GET_QE_REL_INT))
+ if (!(++ecount % cq->entry_repost))
lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
}
break;
@@ -10808,7 +11031,7 @@
else
workposted |= lpfc_sli4_sp_handle_cqe(phba, cq,
cqe);
- if (!(++ecount % LPFC_GET_QE_REL_INT))
+ if (!(++ecount % cq->entry_repost))
lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
}
break;
@@ -11040,7 +11263,7 @@
/* Process all the entries to the CQ */
while ((cqe = lpfc_sli4_cq_get(cq))) {
workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, cqe);
- if (!(++ecount % LPFC_GET_QE_REL_INT))
+ if (!(++ecount % cq->entry_repost))
lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
}
@@ -11110,6 +11333,8 @@
/* Get to the EQ struct associated with this vector */
speq = phba->sli4_hba.sp_eq;
+ if (unlikely(!speq))
+ return IRQ_NONE;
/* Check device state for handling interrupt */
if (unlikely(lpfc_intr_state_check(phba))) {
@@ -11127,7 +11352,7 @@
*/
while ((eqe = lpfc_sli4_eq_get(speq))) {
lpfc_sli4_sp_handle_eqe(phba, eqe);
- if (!(++ecount % LPFC_GET_QE_REL_INT))
+ if (!(++ecount % speq->entry_repost))
lpfc_sli4_eq_release(speq, LPFC_QUEUE_NOARM);
}
@@ -11187,6 +11412,8 @@
if (unlikely(!phba))
return IRQ_NONE;
+ if (unlikely(!phba->sli4_hba.fp_eq))
+ return IRQ_NONE;
/* Get to the EQ struct associated with this vector */
fpeq = phba->sli4_hba.fp_eq[fcp_eqidx];
@@ -11207,7 +11434,7 @@
*/
while ((eqe = lpfc_sli4_eq_get(fpeq))) {
lpfc_sli4_fp_handle_eqe(phba, eqe, fcp_eqidx);
- if (!(++ecount % LPFC_GET_QE_REL_INT))
+ if (!(++ecount % fpeq->entry_repost))
lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_NOARM);
}
@@ -11359,6 +11586,15 @@
}
queue->entry_size = entry_size;
queue->entry_count = entry_count;
+
+ /*
+ * entry_repost is calculated based on the number of entries in the
+ * queue. This works out except for RQs. If buffers are NOT initially
+ * posted for every RQE, entry_repost should be adjusted accordingly.
+ */
+ queue->entry_repost = (entry_count >> 3);
+ if (queue->entry_repost < LPFC_QUEUE_MIN_REPOST)
+ queue->entry_repost = LPFC_QUEUE_MIN_REPOST;
queue->phba = phba;
return queue;
@@ -11924,6 +12160,31 @@
}
/**
+ * lpfc_rq_adjust_repost - Adjust entry_repost for an RQ
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @rq: The queue structure to use for the receive queue.
+ * @qno: The associated HBQ number
+ *
+ *
+ * For SLI4 we need to adjust the RQ repost value based on
+ * the number of buffers that are initially posted to the RQ.
+ */
+void
+lpfc_rq_adjust_repost(struct lpfc_hba *phba, struct lpfc_queue *rq, int qno)
+{
+ uint32_t cnt;
+
+ cnt = lpfc_hbq_defs[qno]->entry_count;
+
+ /* Recalc repost for RQs based on buffers initially posted */
+ cnt = (cnt >> 3);
+ if (cnt < LPFC_QUEUE_MIN_REPOST)
+ cnt = LPFC_QUEUE_MIN_REPOST;
+
+ rq->entry_repost = cnt;
+}
+
+/**
* lpfc_rq_create - Create a Receive Queue on the HBA
* @phba: HBA structure that indicates port to create a queue on.
* @hrq: The queue structure to use to create the header receive queue.
@@ -12489,7 +12750,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
@@ -12704,7 +12965,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -12867,7 +13128,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -12991,7 +13252,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -13147,7 +13408,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
@@ -13296,7 +13557,8 @@
uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
fc_hdr->fh_d_id[1] << 8 |
fc_hdr->fh_d_id[2]);
-
+ if (did == Fabric_DID)
+ return phba->pport;
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
@@ -14312,7 +14574,7 @@
if (!mboxq)
return -ENOMEM;
lpfc_init_vpi(phba, mboxq, vport->vpi);
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
if (rc != MBX_SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_SLI,
@@ -15188,7 +15450,7 @@
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
/* The IOCTL status is embedded in the mailbox subheader. */
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index a0075b0..29c13b6 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -293,13 +293,11 @@
struct lpfc_lnk_stat lnk_stat_offsets;
};
-#define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox
- command */
-#define LPFC_MBOX_SLI4_CONFIG_TMO 60 /* Sec tmo for outstanding mbox
- command */
-#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write
- * or erase cmds. This is especially
- * long because of the potential of
- * multiple flash erases that can be
- * spawned.
- */
+/* Timeout for normal outstanding mbox command (Seconds) */
+#define LPFC_MBOX_TMO 30
+/* Timeout for non-flash-based outstanding sli_config mbox command (Seconds) */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60
+/* Timeout for flash-based outstanding sli_config mbox command (Seconds) */
+#define LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO 300
+/* Timeout for other flash-based outstanding mbox command (Seconds) */
+#define LPFC_MBOX_TMO_FLASH_CMD 300
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 19bb87a..d5cffd8 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -23,7 +23,6 @@
#define LPFC_XRI_EXCH_BUSY_WAIT_T1 10
#define LPFC_XRI_EXCH_BUSY_WAIT_T2 30000
#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32
-#define LPFC_GET_QE_REL_INT 32
#define LPFC_RPI_LOW_WATER_MARK 10
#define LPFC_UNREG_FCF 1
@@ -126,6 +125,8 @@
struct list_head child_list;
uint32_t entry_count; /* Number of entries to support on the queue */
uint32_t entry_size; /* Size of each queue entry. */
+ uint32_t entry_repost; /* Count of entries before doorbell is rung */
+#define LPFC_QUEUE_MIN_REPOST 8
uint32_t queue_id; /* Queue ID assigned by the hardware */
uint32_t assoc_qid; /* Queue ID associated with, for CQ/WQ/MQ */
struct list_head page_list;
@@ -388,6 +389,16 @@
uint32_t vf_number;
};
+struct lpfc_sli4_lnk_info {
+ uint8_t lnk_dv;
+#define LPFC_LNK_DAT_INVAL 0
+#define LPFC_LNK_DAT_VAL 1
+ uint8_t lnk_tp;
+#define LPFC_LNK_GE 0x0 /* FCoE */
+#define LPFC_LNK_FC 0x1 /* FC */
+ uint8_t lnk_no;
+};
+
/* SLI4 HBA data structure entries */
struct lpfc_sli4_hba {
void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
@@ -503,6 +514,10 @@
struct list_head sp_els_xri_aborted_work_queue;
struct list_head sp_unsol_work_queue;
struct lpfc_sli4_link link_state;
+ struct lpfc_sli4_lnk_info lnk_info;
+ uint32_t pport_name_sta;
+#define LPFC_SLI4_PPNAME_NON 0
+#define LPFC_SLI4_PPNAME_GET 1
struct lpfc_iov iov;
spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
@@ -553,6 +568,7 @@
* SLI4 specific function prototypes
*/
int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *);
int lpfc_sli4_hba_setup(struct lpfc_hba *);
int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
uint8_t, uint32_t, bool);
@@ -576,6 +592,7 @@
struct lpfc_queue *, uint32_t);
uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+void lpfc_rq_adjust_repost(struct lpfc_hba *, struct lpfc_queue *, int);
uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
@@ -632,5 +649,5 @@
void lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_sli4_unregister_fcf(struct lpfc_hba *);
int lpfc_sli4_post_status_check(struct lpfc_hba *);
-uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
-
+uint8_t lpfc_sli_config_mbox_subsys_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
+uint8_t lpfc_sli_config_mbox_opcode_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c1e0ae9..b0630e3 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.25"
+#define LPFC_DRIVER_VERSION "8.3.27"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 1feb551..cff6ca6 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -692,13 +692,14 @@
/* Indicate free memory when release */
NLP_SET_FREE_REQ(ndlp);
} else {
- if (!NLP_CHK_NODE_ACT(ndlp))
+ if (!NLP_CHK_NODE_ACT(ndlp)) {
ndlp = lpfc_enable_node(vport, ndlp,
NLP_STE_UNUSED_NODE);
if (!ndlp)
goto skip_logo;
+ }
- /* Remove ndlp from vport npld list */
+ /* Remove ndlp from vport list */
lpfc_dequeue_node(vport, ndlp);
spin_lock_irq(&phba->ndlp_lock);
if (!NLP_CHK_FREE_REQ(ndlp))
@@ -711,8 +712,17 @@
}
spin_unlock_irq(&phba->ndlp_lock);
}
- if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
+
+ /*
+ * If the vpi is not registered, then a valid FDISC doesn't
+ * exist and there is no need for a ELS LOGO. Just cleanup
+ * the ndlp.
+ */
+ if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) {
+ lpfc_nlp_put(ndlp);
goto skip_logo;
+ }
+
vport->unreg_vpi_cmpl = VPORT_INVAL;
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index 3893337..590ce1e 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -230,9 +230,6 @@
u32 dma_count, int write, u8 cmd)
{
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
- unsigned long flags;
-
- local_irq_save(flags);
mep->error = 0;
@@ -270,8 +267,6 @@
esp_count = n;
}
} while (esp_count);
-
- local_irq_restore(flags);
}
/*
@@ -353,8 +348,6 @@
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
u8 *fifo = esp->regs + ESP_FDATA * 16;
- disable_irq(esp->host->irq);
-
cmd &= ~ESP_CMD_DMA;
mep->error = 0;
@@ -431,8 +424,6 @@
scsi_esp_cmd(esp, ESP_CMD_TI);
}
}
-
- enable_irq(esp->host->irq);
}
static int mac_esp_irq_pending(struct esp *esp)
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 3948a00..dd94c7d 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -33,9 +33,9 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.05.40-rc1"
-#define MEGASAS_RELDATE "Jul. 26, 2011"
-#define MEGASAS_EXT_VERSION "Tue. Jul. 26 17:00:00 PDT 2011"
+#define MEGASAS_VERSION "00.00.06.12-rc1"
+#define MEGASAS_RELDATE "Oct. 5, 2011"
+#define MEGASAS_EXT_VERSION "Wed. Oct. 5 17:00:00 PDT 2011"
/*
* Device IDs
@@ -48,6 +48,7 @@
#define PCI_DEVICE_ID_LSI_SAS0073SKINNY 0x0073
#define PCI_DEVICE_ID_LSI_SAS0071SKINNY 0x0071
#define PCI_DEVICE_ID_LSI_FUSION 0x005b
+#define PCI_DEVICE_ID_LSI_INVADER 0x005d
/*
* =====================================
@@ -138,6 +139,7 @@
#define MFI_CMD_ABORT 0x06
#define MFI_CMD_SMP 0x07
#define MFI_CMD_STP 0x08
+#define MFI_CMD_INVALID 0xff
#define MR_DCMD_CTRL_GET_INFO 0x01010000
#define MR_DCMD_LD_GET_LIST 0x03010000
@@ -221,6 +223,7 @@
MFI_STAT_RESERVATION_IN_PROGRESS = 0x36,
MFI_STAT_I2C_ERRORS_DETECTED = 0x37,
MFI_STAT_PCI_ERRORS_DETECTED = 0x38,
+ MFI_STAT_CONFIG_SEQ_MISMATCH = 0x67,
MFI_STAT_INVALID_STATUS = 0xFF
};
@@ -716,7 +719,7 @@
#define MEGASAS_DEFAULT_INIT_ID -1
#define MEGASAS_MAX_LUN 8
#define MEGASAS_MAX_LD 64
-#define MEGASAS_DEFAULT_CMD_PER_LUN 128
+#define MEGASAS_DEFAULT_CMD_PER_LUN 256
#define MEGASAS_MAX_PD (MEGASAS_MAX_PD_CHANNELS * \
MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_MAX_LD_IDS (MEGASAS_MAX_LD_CHANNELS * \
@@ -755,6 +758,7 @@
#define MEGASAS_INT_CMDS 32
#define MEGASAS_SKINNY_INT_CMDS 5
+#define MEGASAS_MAX_MSIX_QUEUES 16
/*
* FW can accept both 32 and 64 bit SGLs. We want to allocate 32/64 bit
* SGLs based on the size of dma_addr_t
@@ -1276,6 +1280,11 @@
struct megasas_instance *instance;
};
+struct megasas_irq_context {
+ struct megasas_instance *instance;
+ u32 MSIxIndex;
+};
+
struct megasas_instance {
u32 *producer;
@@ -1349,8 +1358,9 @@
/* Ptr to hba specific information */
void *ctrl_context;
- u8 msi_flag;
- struct msix_entry msixentry;
+ unsigned int msix_vectors;
+ struct msix_entry msixentry[MEGASAS_MAX_MSIX_QUEUES];
+ struct megasas_irq_context irq_context[MEGASAS_MAX_MSIX_QUEUES];
u64 map_id;
struct megasas_cmd *map_update_cmd;
unsigned long bar;
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 776d019..29a994f 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -18,7 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* FILE: megaraid_sas_base.c
- * Version : v00.00.05.40-rc1
+ * Version : v00.00.06.12-rc1
*
* Authors: LSI Corporation
* Sreenivas Bagalkote
@@ -84,7 +84,7 @@
MODULE_AUTHOR("megaraidlinux@lsi.com");
MODULE_DESCRIPTION("LSI MegaRAID SAS Driver");
-int megasas_transition_to_ready(struct megasas_instance *instance);
+int megasas_transition_to_ready(struct megasas_instance *instance, int ocr);
static int megasas_get_pd_list(struct megasas_instance *instance);
static int megasas_issue_init_mfi(struct megasas_instance *instance);
static int megasas_register_aen(struct megasas_instance *instance,
@@ -114,6 +114,8 @@
/* xscale IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FUSION)},
/* Fusion */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INVADER)},
+ /* Invader */
{}
};
@@ -213,6 +215,10 @@
cmd->scmd = NULL;
cmd->frame_count = 0;
+ if ((instance->pdev->device != PCI_DEVICE_ID_LSI_FUSION) &&
+ (instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER) &&
+ (reset_devices))
+ cmd->frame->hdr.cmd = MFI_CMD_INVALID;
list_add_tail(&cmd->list, &instance->cmd_pool);
spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
@@ -1583,7 +1589,8 @@
{
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)) {
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER)) {
writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
} else {
writel(MFI_STOP_ADP, &instance->reg_set->inbound_doorbell);
@@ -1907,7 +1914,6 @@
static enum
blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
{
- struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr;
struct megasas_instance *instance;
unsigned long flags;
@@ -1916,7 +1922,7 @@
return BLK_EH_NOT_HANDLED;
}
- instance = cmd->instance;
+ instance = (struct megasas_instance *)scmd->device->host->hostdata;
if (!(instance->flag & MEGASAS_FW_BUSY)) {
/* FW is busy, throttle IO */
spin_lock_irqsave(instance->host->host_lock, flags);
@@ -1957,7 +1963,8 @@
/*
* First wait for all commands to complete
*/
- if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER))
ret = megasas_reset_fusion(scmd->device->host);
else
ret = megasas_generic_reset(scmd);
@@ -2161,7 +2168,16 @@
cmd->scmd->SCp.ptr = NULL;
switch (hdr->cmd) {
-
+ case MFI_CMD_INVALID:
+ /* Some older 1068 controller FW may keep a pended
+ MR_DCMD_CTRL_EVENT_GET_INFO left over from the main kernel
+ when booting the kdump kernel. Ignore this command to
+ prevent a kernel panic on shutdown of the kdump kernel. */
+ printk(KERN_WARNING "megaraid_sas: MFI_CMD_INVALID command "
+ "completed.\n");
+ printk(KERN_WARNING "megaraid_sas: If you have a controller "
+ "other than PERC5, please upgrade your firmware.\n");
+ break;
case MFI_CMD_PD_SCSI_IO:
case MFI_CMD_LD_SCSI_IO:
@@ -2477,7 +2493,7 @@
msleep(1000);
}
- if (megasas_transition_to_ready(instance)) {
+ if (megasas_transition_to_ready(instance, 1)) {
printk(KERN_NOTICE "megaraid_sas:adapter not ready\n");
megaraid_sas_kill_hba(instance);
@@ -2532,7 +2548,7 @@
instance->reg_set)
) == 0) {
/* Hardware may not set outbound_intr_status in MSI-X mode */
- if (!instance->msi_flag)
+ if (!instance->msix_vectors)
return IRQ_NONE;
}
@@ -2590,16 +2606,14 @@
*/
static irqreturn_t megasas_isr(int irq, void *devp)
{
- struct megasas_instance *instance;
+ struct megasas_irq_context *irq_context = devp;
+ struct megasas_instance *instance = irq_context->instance;
unsigned long flags;
irqreturn_t rc;
- if (atomic_read(
- &(((struct megasas_instance *)devp)->fw_reset_no_pci_access)))
+ if (atomic_read(&instance->fw_reset_no_pci_access))
return IRQ_HANDLED;
- instance = (struct megasas_instance *)devp;
-
spin_lock_irqsave(&instance->hba_lock, flags);
rc = megasas_deplete_reply_queue(instance, DID_OK);
spin_unlock_irqrestore(&instance->hba_lock, flags);
@@ -2617,7 +2631,7 @@
* has to wait for the ready state.
*/
int
-megasas_transition_to_ready(struct megasas_instance* instance)
+megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
{
int i;
u8 max_wait;
@@ -2639,11 +2653,13 @@
switch (fw_state) {
case MFI_STATE_FAULT:
-
printk(KERN_DEBUG "megasas: FW in FAULT state!!\n");
- max_wait = MEGASAS_RESET_WAIT_TIME;
- cur_state = MFI_STATE_FAULT;
- break;
+ if (ocr) {
+ max_wait = MEGASAS_RESET_WAIT_TIME;
+ cur_state = MFI_STATE_FAULT;
+ break;
+ } else
+ return -ENODEV;
case MFI_STATE_WAIT_HANDSHAKE:
/*
@@ -2654,7 +2670,9 @@
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
(instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FUSION)) {
+ PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_INVADER)) {
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
@@ -2674,7 +2692,9 @@
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
(instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FUSION)) {
+ PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_INVADER)) {
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
} else
@@ -2695,11 +2715,15 @@
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
(instance->pdev->device
- == PCI_DEVICE_ID_LSI_FUSION)) {
+ == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device
+ == PCI_DEVICE_ID_LSI_INVADER)) {
writel(MFI_RESET_FLAGS,
&instance->reg_set->doorbell);
- if (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_FUSION) {
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_INVADER)) {
for (i = 0; i < (10 * 1000); i += 20) {
if (readl(
&instance->
@@ -2922,6 +2946,10 @@
memset(cmd->frame, 0, total_sz);
cmd->frame->io.context = cmd->index;
cmd->frame->io.pad_0 = 0;
+ if ((instance->pdev->device != PCI_DEVICE_ID_LSI_FUSION) &&
+ (instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER) &&
+ (reset_devices))
+ cmd->frame->hdr.cmd = MFI_CMD_INVALID;
}
return 0;
@@ -3474,6 +3502,7 @@
struct megasas_register_set __iomem *reg_set;
struct megasas_ctrl_info *ctrl_info;
unsigned long bar_list;
+ int i;
/* Find first memory bar */
bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
@@ -3496,6 +3525,7 @@
switch (instance->pdev->device) {
case PCI_DEVICE_ID_LSI_FUSION:
+ case PCI_DEVICE_ID_LSI_INVADER:
instance->instancet = &megasas_instance_template_fusion;
break;
case PCI_DEVICE_ID_LSI_SAS1078R:
@@ -3520,15 +3550,39 @@
/*
* We expect the FW state to be READY
*/
- if (megasas_transition_to_ready(instance))
+ if (megasas_transition_to_ready(instance, 0))
goto fail_ready_state;
/* Check if MSI-X is supported while in ready state */
msix_enable = (instance->instancet->read_fw_status_reg(reg_set) &
0x4000000) >> 0x1a;
- if (msix_enable && !msix_disable &&
- !pci_enable_msix(instance->pdev, &instance->msixentry, 1))
- instance->msi_flag = 1;
+ if (msix_enable && !msix_disable) {
+ /* Check max MSI-X vectors */
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER)) {
+ instance->msix_vectors = (readl(&instance->reg_set->
+ outbound_scratch_pad_2
+ ) & 0x1F) + 1;
+ } else
+ instance->msix_vectors = 1;
+ /* Don't bother allocating more MSI-X vectors than cpus */
+ instance->msix_vectors = min(instance->msix_vectors,
+ (unsigned int)num_online_cpus());
+ for (i = 0; i < instance->msix_vectors; i++)
+ instance->msixentry[i].entry = i;
+ i = pci_enable_msix(instance->pdev, instance->msixentry,
+ instance->msix_vectors);
+ if (i >= 0) {
+ if (i) {
+ if (!pci_enable_msix(instance->pdev,
+ instance->msixentry, i))
+ instance->msix_vectors = i;
+ else
+ instance->msix_vectors = 0;
+ }
+ } else
+ instance->msix_vectors = 0;
+ }
/* Get operational params, sge flags, send init cmd to controller */
if (instance->instancet->init_adapter(instance))
@@ -3892,7 +3946,8 @@
host->max_cmd_len = 16;
/* Fusion only supports host reset */
- if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) {
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER)) {
host->hostt->eh_device_reset_handler = NULL;
host->hostt->eh_bus_reset_handler = NULL;
}
@@ -3942,7 +3997,7 @@
static int __devinit
megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- int rval, pos;
+ int rval, pos, i, j;
struct Scsi_Host *host;
struct megasas_instance *instance;
u16 control = 0;
@@ -4002,6 +4057,7 @@
switch (instance->pdev->device) {
case PCI_DEVICE_ID_LSI_FUSION:
+ case PCI_DEVICE_ID_LSI_INVADER:
{
struct fusion_context *fusion;
@@ -4094,7 +4150,8 @@
instance->last_time = 0;
instance->disableOnlineCtrlReset = 1;
- if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER))
INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
else
INIT_WORK(&instance->work_init, process_fw_state_change_wq);
@@ -4108,11 +4165,32 @@
/*
* Register IRQ
*/
- if (request_irq(instance->msi_flag ? instance->msixentry.vector :
- pdev->irq, instance->instancet->service_isr,
- IRQF_SHARED, "megasas", instance)) {
- printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
- goto fail_irq;
+ if (instance->msix_vectors) {
+ for (i = 0 ; i < instance->msix_vectors; i++) {
+ instance->irq_context[i].instance = instance;
+ instance->irq_context[i].MSIxIndex = i;
+ if (request_irq(instance->msixentry[i].vector,
+ instance->instancet->service_isr, 0,
+ "megasas",
+ &instance->irq_context[i])) {
+ printk(KERN_DEBUG "megasas: Failed to "
+ "register IRQ for vector %d.\n", i);
+ for (j = 0 ; j < i ; j++)
+ free_irq(
+ instance->msixentry[j].vector,
+ &instance->irq_context[j]);
+ goto fail_irq;
+ }
+ }
+ } else {
+ instance->irq_context[0].instance = instance;
+ instance->irq_context[0].MSIxIndex = 0;
+ if (request_irq(pdev->irq, instance->instancet->service_isr,
+ IRQF_SHARED, "megasas",
+ &instance->irq_context[0])) {
+ printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
+ goto fail_irq;
+ }
}
instance->instancet->enable_intr(instance->reg_set);
@@ -4156,15 +4234,20 @@
pci_set_drvdata(pdev, NULL);
instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->msi_flag ? instance->msixentry.vector :
- instance->pdev->irq, instance);
+ if (instance->msix_vectors)
+ for (i = 0 ; i < instance->msix_vectors; i++)
+ free_irq(instance->msixentry[i].vector,
+ &instance->irq_context[i]);
+ else
+ free_irq(instance->pdev->irq, &instance->irq_context[0]);
fail_irq:
- if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER))
megasas_release_fusion(instance);
else
megasas_release_mfi(instance);
fail_init_mfi:
- if (instance->msi_flag)
+ if (instance->msix_vectors)
pci_disable_msix(instance->pdev);
fail_alloc_dma_buf:
if (instance->evt_detail)
@@ -4280,6 +4363,7 @@
{
struct Scsi_Host *host;
struct megasas_instance *instance;
+ int i;
instance = pci_get_drvdata(pdev);
host = instance->host;
@@ -4303,9 +4387,14 @@
pci_set_drvdata(instance->pdev, instance);
instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->msi_flag ? instance->msixentry.vector :
- instance->pdev->irq, instance);
- if (instance->msi_flag)
+
+ if (instance->msix_vectors)
+ for (i = 0 ; i < instance->msix_vectors; i++)
+ free_irq(instance->msixentry[i].vector,
+ &instance->irq_context[i]);
+ else
+ free_irq(instance->pdev->irq, &instance->irq_context[0]);
+ if (instance->msix_vectors)
pci_disable_msix(instance->pdev);
pci_save_state(pdev);
@@ -4323,7 +4412,7 @@
static int
megasas_resume(struct pci_dev *pdev)
{
- int rval;
+ int rval, i, j;
struct Scsi_Host *host;
struct megasas_instance *instance;
@@ -4357,15 +4446,17 @@
/*
* We expect the FW state to be READY
*/
- if (megasas_transition_to_ready(instance))
+ if (megasas_transition_to_ready(instance, 0))
goto fail_ready_state;
/* Now re-enable MSI-X */
- if (instance->msi_flag)
- pci_enable_msix(instance->pdev, &instance->msixentry, 1);
+ if (instance->msix_vectors)
+ pci_enable_msix(instance->pdev, instance->msixentry,
+ instance->msix_vectors);
switch (instance->pdev->device) {
case PCI_DEVICE_ID_LSI_FUSION:
+ case PCI_DEVICE_ID_LSI_INVADER:
{
megasas_reset_reply_desc(instance);
if (megasas_ioc_init_fusion(instance)) {
@@ -4391,11 +4482,32 @@
/*
* Register IRQ
*/
- if (request_irq(instance->msi_flag ? instance->msixentry.vector :
- pdev->irq, instance->instancet->service_isr,
- IRQF_SHARED, "megasas", instance)) {
- printk(KERN_ERR "megasas: Failed to register IRQ\n");
- goto fail_irq;
+ if (instance->msix_vectors) {
+ for (i = 0 ; i < instance->msix_vectors; i++) {
+ instance->irq_context[i].instance = instance;
+ instance->irq_context[i].MSIxIndex = i;
+ if (request_irq(instance->msixentry[i].vector,
+ instance->instancet->service_isr, 0,
+ "megasas",
+ &instance->irq_context[i])) {
+ printk(KERN_DEBUG "megasas: Failed to "
+ "register IRQ for vector %d.\n", i);
+ for (j = 0 ; j < i ; j++)
+ free_irq(
+ instance->msixentry[j].vector,
+ &instance->irq_context[j]);
+ goto fail_irq;
+ }
+ }
+ } else {
+ instance->irq_context[0].instance = instance;
+ instance->irq_context[0].MSIxIndex = 0;
+ if (request_irq(pdev->irq, instance->instancet->service_isr,
+ IRQF_SHARED, "megasas",
+ &instance->irq_context[0])) {
+ printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
+ goto fail_irq;
+ }
}
instance->instancet->enable_intr(instance->reg_set);
@@ -4492,13 +4604,18 @@
instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->msi_flag ? instance->msixentry.vector :
- instance->pdev->irq, instance);
- if (instance->msi_flag)
+ if (instance->msix_vectors)
+ for (i = 0 ; i < instance->msix_vectors; i++)
+ free_irq(instance->msixentry[i].vector,
+ &instance->irq_context[i]);
+ else
+ free_irq(instance->pdev->irq, &instance->irq_context[0]);
+ if (instance->msix_vectors)
pci_disable_msix(instance->pdev);
switch (instance->pdev->device) {
case PCI_DEVICE_ID_LSI_FUSION:
+ case PCI_DEVICE_ID_LSI_INVADER:
megasas_release_fusion(instance);
for (i = 0; i < 2 ; i++)
if (fusion->ld_map[i])
@@ -4539,14 +4656,20 @@
*/
static void megasas_shutdown(struct pci_dev *pdev)
{
+ int i;
struct megasas_instance *instance = pci_get_drvdata(pdev);
+
instance->unload = 1;
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->msi_flag ? instance->msixentry.vector :
- instance->pdev->irq, instance);
- if (instance->msi_flag)
+ if (instance->msix_vectors)
+ for (i = 0 ; i < instance->msix_vectors; i++)
+ free_irq(instance->msixentry[i].vector,
+ &instance->irq_context[i]);
+ else
+ free_irq(instance->pdev->irq, &instance->irq_context[0]);
+ if (instance->msix_vectors)
pci_disable_msix(instance->pdev);
}
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index 5a5af1f..5255dd6 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -52,6 +52,7 @@
#include <scsi/scsi_host.h>
#include "megaraid_sas_fusion.h"
+#include "megaraid_sas.h"
#include <asm/div64.h>
#define ABS_DIFF(a, b) (((a) > (b)) ? ((a) - (b)) : ((b) - (a)))
@@ -226,8 +227,9 @@
* span - Span number
* block - Absolute Block number in the physical disk
*/
-u8 MR_GetPhyParams(u32 ld, u64 stripRow, u16 stripRef, u64 *pdBlock,
- u16 *pDevHandle, struct RAID_CONTEXT *pRAID_Context,
+u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow,
+ u16 stripRef, u64 *pdBlock, u16 *pDevHandle,
+ struct RAID_CONTEXT *pRAID_Context,
struct MR_FW_RAID_MAP_ALL *map)
{
struct MR_LD_RAID *raid = MR_LdRaidGet(ld, map);
@@ -279,7 +281,8 @@
*pDevHandle = MR_PdDevHandleGet(pd, map);
else {
*pDevHandle = MR_PD_INVALID; /* set dev handle as invalid. */
- if (raid->level >= 5)
+ if ((raid->level >= 5) &&
+ (instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER))
pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
else if (raid->level == 1) {
/* Get alternate Pd. */
@@ -306,7 +309,8 @@
* This function will return 0 if region lock was acquired OR return num strips
*/
u8
-MR_BuildRaidContext(struct IO_REQUEST_INFO *io_info,
+MR_BuildRaidContext(struct megasas_instance *instance,
+ struct IO_REQUEST_INFO *io_info,
struct RAID_CONTEXT *pRAID_Context,
struct MR_FW_RAID_MAP_ALL *map)
{
@@ -394,8 +398,12 @@
}
pRAID_Context->timeoutValue = map->raidMap.fpPdIoTimeoutSec;
- pRAID_Context->regLockFlags = (isRead) ? REGION_TYPE_SHARED_READ :
- raid->regTypeReqOnWrite;
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER)
+ pRAID_Context->regLockFlags = (isRead) ?
+ raid->regTypeReqOnRead : raid->regTypeReqOnWrite;
+ else
+ pRAID_Context->regLockFlags = (isRead) ?
+ REGION_TYPE_SHARED_READ : raid->regTypeReqOnWrite;
pRAID_Context->VirtualDiskTgtId = raid->targetId;
pRAID_Context->regLockRowLBA = regStart;
pRAID_Context->regLockLength = regSize;
@@ -404,7 +412,8 @@
/*Get Phy Params only if FP capable, or else leave it to MR firmware
to do the calculation.*/
if (io_info->fpOkForIo) {
- retval = MR_GetPhyParams(ld, start_strip, ref_in_start_stripe,
+ retval = MR_GetPhyParams(instance, ld, start_strip,
+ ref_in_start_stripe,
&io_info->pdBlock,
&io_info->devHandle, pRAID_Context,
map);
@@ -415,7 +424,8 @@
} else if (isRead) {
uint stripIdx;
for (stripIdx = 0; stripIdx < num_strips; stripIdx++) {
- if (!MR_GetPhyParams(ld, start_strip + stripIdx,
+ if (!MR_GetPhyParams(instance, ld,
+ start_strip + stripIdx,
ref_in_start_stripe,
&io_info->pdBlock,
&io_info->devHandle,
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index f13e7ab..bfd87fa 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -74,7 +74,8 @@
struct megasas_cmd *cmd);
u8
-MR_BuildRaidContext(struct IO_REQUEST_INFO *io_info,
+MR_BuildRaidContext(struct megasas_instance *instance,
+ struct IO_REQUEST_INFO *io_info,
struct RAID_CONTEXT *pRAID_Context,
struct MR_FW_RAID_MAP_ALL *map);
u16 MR_TargetIdToLdGet(u32 ldTgtId, struct MR_FW_RAID_MAP_ALL *map);
@@ -89,7 +90,7 @@
struct LD_LOAD_BALANCE_INFO *lbInfo);
u16 get_updated_dev_handle(struct LD_LOAD_BALANCE_INFO *lbInfo,
struct IO_REQUEST_INFO *in_info);
-int megasas_transition_to_ready(struct megasas_instance *instance);
+int megasas_transition_to_ready(struct megasas_instance *instance, int ocr);
void megaraid_sas_kill_hba(struct megasas_instance *instance);
extern u32 megasas_dbg_lvl;
@@ -101,6 +102,10 @@
void
megasas_enable_intr_fusion(struct megasas_register_set __iomem *regs)
{
+ /* For Thunderbolt/Invader also clear intr on enable */
+ writel(~0, ®s->outbound_intr_status);
+ readl(®s->outbound_intr_status);
+
writel(~MFI_FUSION_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
@@ -139,11 +144,6 @@
if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK))
return 0;
- /*
- * dummy read to flush PCI
- */
- readl(®s->outbound_intr_status);
-
return 1;
}
@@ -385,7 +385,7 @@
int
megasas_alloc_cmds_fusion(struct megasas_instance *instance)
{
- int i, j;
+ int i, j, count;
u32 max_cmd, io_frames_sz;
struct fusion_context *fusion;
struct megasas_cmd_fusion *cmd;
@@ -409,9 +409,10 @@
goto fail_req_desc;
}
+ count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
fusion->reply_frames_desc_pool =
pci_pool_create("reply_frames pool", instance->pdev,
- fusion->reply_alloc_sz, 16, 0);
+ fusion->reply_alloc_sz * count, 16, 0);
if (!fusion->reply_frames_desc_pool) {
printk(KERN_ERR "megasas; Could not allocate memory for "
@@ -430,7 +431,7 @@
}
reply_desc = fusion->reply_frames_desc;
- for (i = 0; i < fusion->reply_q_depth; i++, reply_desc++)
+ for (i = 0; i < fusion->reply_q_depth * count; i++, reply_desc++)
reply_desc->Words = ULLONG_MAX;
io_frames_sz = fusion->io_frames_alloc_sz;
@@ -590,7 +591,6 @@
struct megasas_init_frame *init_frame;
struct MPI2_IOC_INIT_REQUEST *IOCInitMessage;
dma_addr_t ioc_init_handle;
- u32 context;
struct megasas_cmd *cmd;
u8 ret;
struct fusion_context *fusion;
@@ -634,14 +634,13 @@
fusion->reply_frames_desc_phys;
IOCInitMessage->SystemRequestFrameBaseAddress =
fusion->io_request_frames_phys;
-
+ /* Set to 0 for none or 1 MSI-X vectors */
+ IOCInitMessage->HostMSIxVectors = (instance->msix_vectors > 0 ?
+ instance->msix_vectors : 0);
init_frame = (struct megasas_init_frame *)cmd->frame;
memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
frame_hdr = &cmd->frame->hdr;
- context = init_frame->context;
- init_frame->context = context;
-
frame_hdr->cmd_status = 0xFF;
frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
@@ -881,7 +880,7 @@
struct megasas_register_set __iomem *reg_set;
struct fusion_context *fusion;
u32 max_cmd;
- int i = 0;
+ int i = 0, count;
fusion = instance->ctrl_context;
@@ -933,7 +932,9 @@
(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
sizeof(union MPI2_SGE_IO_UNION))/16;
- fusion->last_reply_idx = 0;
+ count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
+ for (i = 0 ; i < count; i++)
+ fusion->last_reply_idx[i] = 0;
/*
* Allocate memory for descriptors
@@ -1043,7 +1044,9 @@
case MFI_STAT_DEVICE_NOT_FOUND:
cmd->scmd->result = DID_BAD_TARGET << 16;
break;
-
+ case MFI_STAT_CONFIG_SEQ_MISMATCH:
+ cmd->scmd->result = DID_IMM_RETRY << 16;
+ break;
default:
printk(KERN_DEBUG "megasas: FW status %#x\n", status);
cmd->scmd->result = DID_ERROR << 16;
@@ -1066,14 +1069,17 @@
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr,
struct megasas_cmd_fusion *cmd)
{
- int i, sg_processed;
- int sge_count, sge_idx;
+ int i, sg_processed, sge_count;
struct scatterlist *os_sgl;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
- cmd->io_request->ChainOffset = 0;
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) {
+ struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end = sgl_ptr;
+ sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
+ sgl_ptr_end->Flags = 0;
+ }
sge_count = scsi_dma_map(scp);
@@ -1082,16 +1088,14 @@
if (sge_count > instance->max_num_sge || !sge_count)
return sge_count;
- if (sge_count > fusion->max_sge_in_main_msg) {
- /* One element to store the chain info */
- sge_idx = fusion->max_sge_in_main_msg - 1;
- } else
- sge_idx = sge_count;
-
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
sgl_ptr->Length = sg_dma_len(os_sgl);
sgl_ptr->Address = sg_dma_address(os_sgl);
sgl_ptr->Flags = 0;
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) {
+ if (i == sge_count - 1)
+ sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST;
+ }
sgl_ptr++;
sg_processed = i + 1;
@@ -1100,13 +1104,30 @@
(sge_count > fusion->max_sge_in_main_msg)) {
struct MPI25_IEEE_SGE_CHAIN64 *sg_chain;
- cmd->io_request->ChainOffset =
- fusion->chain_offset_io_request;
+ if (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_INVADER) {
+ if ((cmd->io_request->IoFlags &
+ MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) !=
+ MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH)
+ cmd->io_request->ChainOffset =
+ fusion->
+ chain_offset_io_request;
+ else
+ cmd->io_request->ChainOffset = 0;
+ } else
+ cmd->io_request->ChainOffset =
+ fusion->chain_offset_io_request;
+
sg_chain = sgl_ptr;
/* Prepare chain element */
sg_chain->NextChainOffset = 0;
- sg_chain->Flags = (IEEE_SGE_FLAGS_CHAIN_ELEMENT |
- MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR);
+ if (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_INVADER)
+ sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT;
+ else
+ sg_chain->Flags =
+ (IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR);
sg_chain->Length = (sizeof(union MPI2_SGE_IO_UNION)
*(sge_count - sg_processed));
sg_chain->Address = cmd->sg_frame_phys_addr;
@@ -1399,11 +1420,18 @@
io_request->RaidContext.regLockFlags = 0;
fp_possible = 0;
} else {
- if (MR_BuildRaidContext(&io_info, &io_request->RaidContext,
+ if (MR_BuildRaidContext(instance, &io_info,
+ &io_request->RaidContext,
local_map_ptr))
fp_possible = io_info.fpOkForIo;
}
+ /* Use smp_processor_id() for now until cmd->request->cpu is CPU
+ id by default, not CPU group id, otherwise all MSI-X queues won't
+ be utilized */
+ cmd->request_desc->SCSIIO.MSIxIndex = instance->msix_vectors ?
+ smp_processor_id() % instance->msix_vectors : 0;
+
if (fp_possible) {
megasas_set_pd_lba(io_request, scp->cmd_len, &io_info, scp,
local_map_ptr, start_lba_lo);
@@ -1412,6 +1440,20 @@
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) {
+ if (io_request->RaidContext.regLockFlags ==
+ REGION_TYPE_UNUSED)
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ io_request->RaidContext.Type = MPI2_TYPE_CUDA;
+ io_request->RaidContext.nseg = 0x1;
+ io_request->IoFlags |=
+ MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH;
+ io_request->RaidContext.regLockFlags |=
+ (MR_RL_FLAGS_GRANT_DESTINATION_CUDA |
+ MR_RL_FLAGS_SEQ_NUM_ENABLE);
+ }
if ((fusion->load_balance_info[device_id].loadBalanceFlag) &&
(io_info.isRead)) {
io_info.devHandle =
@@ -1426,11 +1468,23 @@
} else {
io_request->RaidContext.timeoutValue =
local_map_ptr->raidMap.fpPdIoTimeoutSec;
- io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
- io_request->DevHandle = device_id;
cmd->request_desc->SCSIIO.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) {
+ if (io_request->RaidContext.regLockFlags ==
+ REGION_TYPE_UNUSED)
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ io_request->RaidContext.Type = MPI2_TYPE_CUDA;
+ io_request->RaidContext.regLockFlags |=
+ (MR_RL_FLAGS_GRANT_DESTINATION_CPU0 |
+ MR_RL_FLAGS_SEQ_NUM_ENABLE);
+ io_request->RaidContext.nseg = 0x1;
+ }
+ io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
+ io_request->DevHandle = device_id;
} /* Not FP */
}
@@ -1513,8 +1567,10 @@
io_request->EEDPFlags = 0;
io_request->Control = 0;
io_request->EEDPBlockSize = 0;
- io_request->IoFlags = 0;
+ io_request->ChainOffset = 0;
io_request->RaidContext.RAIDFlags = 0;
+ io_request->RaidContext.Type = 0;
+ io_request->RaidContext.nseg = 0;
memcpy(io_request->CDB.CDB32, scp->cmnd, scp->cmd_len);
/*
@@ -1612,7 +1668,6 @@
req_desc->Words = 0;
cmd->request_desc = req_desc;
- cmd->request_desc->Words = 0;
if (megasas_build_io_fusion(instance, scmd, cmd)) {
megasas_return_cmd_fusion(instance, cmd);
@@ -1647,7 +1702,7 @@
* Completes all commands that is in reply descriptor queue
*/
int
-complete_cmd_fusion(struct megasas_instance *instance)
+complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex)
{
union MPI2_REPLY_DESCRIPTORS_UNION *desc;
struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc;
@@ -1667,7 +1722,9 @@
return IRQ_HANDLED;
desc = fusion->reply_frames_desc;
- desc += fusion->last_reply_idx;
+ desc += ((MSIxIndex * fusion->reply_alloc_sz)/
+ sizeof(union MPI2_REPLY_DESCRIPTORS_UNION)) +
+ fusion->last_reply_idx[MSIxIndex];
reply_desc = (struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc;
@@ -1740,16 +1797,19 @@
break;
}
- fusion->last_reply_idx++;
- if (fusion->last_reply_idx >= fusion->reply_q_depth)
- fusion->last_reply_idx = 0;
+ fusion->last_reply_idx[MSIxIndex]++;
+ if (fusion->last_reply_idx[MSIxIndex] >=
+ fusion->reply_q_depth)
+ fusion->last_reply_idx[MSIxIndex] = 0;
desc->Words = ULLONG_MAX;
num_completed++;
/* Get the next reply descriptor */
- if (!fusion->last_reply_idx)
- desc = fusion->reply_frames_desc;
+ if (!fusion->last_reply_idx[MSIxIndex])
+ desc = fusion->reply_frames_desc +
+ ((MSIxIndex * fusion->reply_alloc_sz)/
+ sizeof(union MPI2_REPLY_DESCRIPTORS_UNION));
else
desc++;
@@ -1769,7 +1829,7 @@
return IRQ_NONE;
wmb();
- writel(fusion->last_reply_idx,
+ writel((MSIxIndex << 24) | fusion->last_reply_idx[MSIxIndex],
&instance->reg_set->reply_post_host_index);
megasas_check_and_restore_queue_depth(instance);
return IRQ_HANDLED;
@@ -1787,6 +1847,9 @@
struct megasas_instance *instance =
(struct megasas_instance *)instance_addr;
unsigned long flags;
+ u32 count, MSIxIndex;
+
+ count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
/* If we have already declared adapter dead, donot complete cmds */
spin_lock_irqsave(&instance->hba_lock, flags);
@@ -1797,7 +1860,8 @@
spin_unlock_irqrestore(&instance->hba_lock, flags);
spin_lock_irqsave(&instance->completion_lock, flags);
- complete_cmd_fusion(instance);
+ for (MSIxIndex = 0 ; MSIxIndex < count; MSIxIndex++)
+ complete_cmd_fusion(instance, MSIxIndex);
spin_unlock_irqrestore(&instance->completion_lock, flags);
}
@@ -1806,20 +1870,24 @@
*/
irqreturn_t megasas_isr_fusion(int irq, void *devp)
{
- struct megasas_instance *instance = (struct megasas_instance *)devp;
+ struct megasas_irq_context *irq_context = devp;
+ struct megasas_instance *instance = irq_context->instance;
u32 mfiStatus, fw_state;
- if (!instance->msi_flag) {
+ if (!instance->msix_vectors) {
mfiStatus = instance->instancet->clear_intr(instance->reg_set);
if (!mfiStatus)
return IRQ_NONE;
}
/* If we are resetting, bail */
- if (test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags))
+ if (test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags)) {
+ instance->instancet->clear_intr(instance->reg_set);
return IRQ_HANDLED;
+ }
- if (!complete_cmd_fusion(instance)) {
+ if (!complete_cmd_fusion(instance, irq_context->MSIxIndex)) {
+ instance->instancet->clear_intr(instance->reg_set);
/* If we didn't complete any commands, check for FW fault */
fw_state = instance->instancet->read_fw_status_reg(
instance->reg_set) & MFI_STATE_MASK;
@@ -1866,6 +1934,14 @@
fusion = instance->ctrl_context;
io_req = cmd->io_request;
+
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) {
+ struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end =
+ (struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL;
+ sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
+ sgl_ptr_end->Flags = 0;
+ }
+
mpi25_ieee_chain =
(struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL.IeeeChain;
@@ -1928,15 +2004,12 @@
struct megasas_cmd *cmd)
{
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
- union desc_value d_val;
req_desc = build_mpt_cmd(instance, cmd);
if (!req_desc) {
printk(KERN_ERR "Couldn't issue MFI pass thru cmd\n");
return;
}
- d_val.word = req_desc->Words;
-
instance->instancet->fire_cmd(instance, req_desc->u.low,
req_desc->u.high, instance->reg_set);
}
@@ -2029,14 +2102,16 @@
void megasas_reset_reply_desc(struct megasas_instance *instance)
{
- int i;
+ int i, count;
struct fusion_context *fusion;
union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
fusion = instance->ctrl_context;
- fusion->last_reply_idx = 0;
+ count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
+ for (i = 0 ; i < count ; i++)
+ fusion->last_reply_idx[i] = 0;
reply_desc = fusion->reply_frames_desc;
- for (i = 0 ; i < fusion->reply_q_depth; i++, reply_desc++)
+ for (i = 0 ; i < fusion->reply_q_depth * count; i++, reply_desc++)
reply_desc->Words = ULLONG_MAX;
}
@@ -2057,8 +2132,7 @@
if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
printk(KERN_WARNING "megaraid_sas: Hardware critical error, "
"returning FAILED.\n");
- retval = FAILED;
- goto out;
+ return FAILED;
}
mutex_lock(&instance->reset_mutex);
@@ -2173,7 +2247,7 @@
}
/* Wait for FW to become ready */
- if (megasas_transition_to_ready(instance)) {
+ if (megasas_transition_to_ready(instance, 1)) {
printk(KERN_WARNING "megaraid_sas: Failed to "
"transition controller to ready.\n");
continue;
@@ -2186,6 +2260,8 @@
continue;
}
+ clear_bit(MEGASAS_FUSION_IN_RESET,
+ &instance->reset_flags);
instance->instancet->enable_intr(instance->reg_set);
instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
@@ -2247,6 +2323,7 @@
megaraid_sas_kill_hba(instance);
retval = FAILED;
} else {
+ clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
instance->instancet->enable_intr(instance->reg_set);
instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
}
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index 82b577a..088c9f9 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -43,6 +43,15 @@
#define HOST_DIAG_WRITE_ENABLE 0x80
#define HOST_DIAG_RESET_ADAPTER 0x4
#define MEGASAS_FUSION_MAX_RESET_TRIES 3
+#define MAX_MSIX_QUEUES_FUSION 16
+
+/* Invader defines */
+#define MPI2_TYPE_CUDA 0x2
+#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH 0x4000
+#define MR_RL_FLAGS_GRANT_DESTINATION_CPU0 0x00
+#define MR_RL_FLAGS_GRANT_DESTINATION_CPU1 0x10
+#define MR_RL_FLAGS_GRANT_DESTINATION_CUDA 0x80
+#define MR_RL_FLAGS_SEQ_NUM_ENABLE 0x8
/* T10 PI defines */
#define MR_PROT_INFO_TYPE_CONTROLLER 0x8
@@ -70,7 +79,7 @@
*/
#define MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO 0x7
#define MEGASAS_REQ_DESCRIPT_FLAGS_MFA 0x1
-
+#define MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK 0x2
#define MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT 1
#define MEGASAS_FP_CMD_LEN 16
@@ -82,7 +91,9 @@
*/
struct RAID_CONTEXT {
- u16 resvd0;
+ u8 Type:4;
+ u8 nseg:4;
+ u8 resvd0;
u16 timeoutValue;
u8 regLockFlags;
u8 resvd1;
@@ -527,7 +538,7 @@
u8 ldState;
u8 regTypeReqOnWrite;
u8 modFactor;
- u8 reserved2[1];
+ u8 regTypeReqOnRead;
u16 seqNum;
struct {
@@ -663,7 +674,7 @@
union MPI2_REPLY_DESCRIPTORS_UNION *reply_frames_desc;
struct dma_pool *reply_frames_desc_pool;
- u16 last_reply_idx;
+ u16 last_reply_idx[MAX_MSIX_QUEUES_FUSION];
u32 reply_q_depth;
u32 request_alloc_sz;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 6825772..81209ca 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -833,25 +833,31 @@
static irqreturn_t
_base_interrupt(int irq, void *bus_id)
{
+ struct adapter_reply_queue *reply_q = bus_id;
union reply_descriptor rd;
u32 completed_cmds;
u8 request_desript_type;
u16 smid;
u8 cb_idx;
u32 reply;
- u8 msix_index;
- struct MPT2SAS_ADAPTER *ioc = bus_id;
+ u8 msix_index = reply_q->msix_index;
+ struct MPT2SAS_ADAPTER *ioc = reply_q->ioc;
Mpi2ReplyDescriptorsUnion_t *rpf;
u8 rc;
if (ioc->mask_interrupts)
return IRQ_NONE;
- rpf = &ioc->reply_post_free[ioc->reply_post_host_index];
+ if (!atomic_add_unless(&reply_q->busy, 1, 1))
+ return IRQ_NONE;
+
+ rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
request_desript_type = rpf->Default.ReplyFlags
& MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
- if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+ if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
+ atomic_dec(&reply_q->busy);
return IRQ_NONE;
+ }
completed_cmds = 0;
cb_idx = 0xFF;
@@ -860,9 +866,7 @@
if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
goto out;
reply = 0;
- cb_idx = 0xFF;
smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
- msix_index = rpf->Default.MSIxIndex;
if (request_desript_type ==
MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
reply = le32_to_cpu
@@ -906,32 +910,86 @@
next:
rpf->Words = cpu_to_le64(ULLONG_MAX);
- ioc->reply_post_host_index = (ioc->reply_post_host_index ==
+ reply_q->reply_post_host_index =
+ (reply_q->reply_post_host_index ==
(ioc->reply_post_queue_depth - 1)) ? 0 :
- ioc->reply_post_host_index + 1;
+ reply_q->reply_post_host_index + 1;
request_desript_type =
- ioc->reply_post_free[ioc->reply_post_host_index].Default.
- ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+ reply_q->reply_post_free[reply_q->reply_post_host_index].
+ Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
completed_cmds++;
if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
goto out;
- if (!ioc->reply_post_host_index)
- rpf = ioc->reply_post_free;
+ if (!reply_q->reply_post_host_index)
+ rpf = reply_q->reply_post_free;
else
rpf++;
} while (1);
out:
- if (!completed_cmds)
+ if (!completed_cmds) {
+ atomic_dec(&reply_q->busy);
return IRQ_NONE;
-
+ }
wmb();
- writel(ioc->reply_post_host_index, &ioc->chip->ReplyPostHostIndex);
+ if (ioc->is_warpdrive) {
+ writel(reply_q->reply_post_host_index,
+ ioc->reply_post_host_index[msix_index]);
+ atomic_dec(&reply_q->busy);
+ return IRQ_HANDLED;
+ }
+ writel(reply_q->reply_post_host_index | (msix_index <<
+ MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
+ atomic_dec(&reply_q->busy);
return IRQ_HANDLED;
}
/**
+ * _base_is_controller_msix_enabled - is controller support muli-reply queues
+ * @ioc: per adapter object
+ *
+ */
+static inline int
+_base_is_controller_msix_enabled(struct MPT2SAS_ADAPTER *ioc)
+{
+ return (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
+}
+
+/**
+ * mpt2sas_base_flush_reply_queues - flushing the MSIX reply queues
+ * @ioc: per adapter object
+ * Context: ISR conext
+ *
+ * Called when a Task Management request has completed. We want
+ * to flush the other reply queues so all the outstanding IO has been
+ * completed back to OS before we process the TM completetion.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct adapter_reply_queue *reply_q;
+
+ /* If MSIX capability is turned off
+ * then multi-queues are not enabled
+ */
+ if (!_base_is_controller_msix_enabled(ioc))
+ return;
+
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ if (ioc->shost_recovery)
+ return;
+ /* TMs are on msix_index == 0 */
+ if (reply_q->msix_index == 0)
+ continue;
+ _base_interrupt(reply_q->vector, (void *)reply_q);
+ }
+}
+
+/**
* mpt2sas_base_release_callback_handler - clear interrupt callback handler
* @cb_idx: callback index
*
@@ -1081,41 +1139,6 @@
}
/**
- * _base_save_msix_table - backup msix vector table
- * @ioc: per adapter object
- *
- * This address an errata where diag reset clears out the table
- */
-static void
-_base_save_msix_table(struct MPT2SAS_ADAPTER *ioc)
-{
- int i;
-
- if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
- return;
-
- for (i = 0; i < ioc->msix_vector_count; i++)
- ioc->msix_table_backup[i] = ioc->msix_table[i];
-}
-
-/**
- * _base_restore_msix_table - this restores the msix vector table
- * @ioc: per adapter object
- *
- */
-static void
-_base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc)
-{
- int i;
-
- if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
- return;
-
- for (i = 0; i < ioc->msix_vector_count; i++)
- ioc->msix_table[i] = ioc->msix_table_backup[i];
-}
-
-/**
* _base_check_enable_msix - checks MSIX capabable.
* @ioc: per adapter object
*
@@ -1127,7 +1150,7 @@
{
int base;
u16 message_control;
- u32 msix_table_offset;
+
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
@@ -1137,21 +1160,153 @@
}
/* get msix vector count */
- pci_read_config_word(ioc->pdev, base + 2, &message_control);
- ioc->msix_vector_count = (message_control & 0x3FF) + 1;
-
- /* get msix table */
- pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset);
- msix_table_offset &= 0xFFFFFFF8;
- ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset);
-
+ /* NUMA_IO not supported for older controllers */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
+ ioc->msix_vector_count = 1;
+ else {
+ pci_read_config_word(ioc->pdev, base + 2, &message_control);
+ ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+ }
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, "
- "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name,
- ioc->msix_vector_count, msix_table_offset, ioc->msix_table));
+ "vector_count(%d)\n", ioc->name, ioc->msix_vector_count));
+
return 0;
}
/**
+ * _base_free_irq - free irq
+ * @ioc: per adapter object
+ *
+ * Freeing respective reply_queue from the list.
+ */
+static void
+_base_free_irq(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct adapter_reply_queue *reply_q, *next;
+
+ if (list_empty(&ioc->reply_queue_list))
+ return;
+
+ list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
+ list_del(&reply_q->list);
+ synchronize_irq(reply_q->vector);
+ free_irq(reply_q->vector, reply_q);
+ kfree(reply_q);
+ }
+}
+
+/**
+ * _base_request_irq - request irq
+ * @ioc: per adapter object
+ * @index: msix index into vector table
+ * @vector: irq vector
+ *
+ * Inserting respective reply_queue into the list.
+ */
+static int
+_base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector)
+{
+ struct adapter_reply_queue *reply_q;
+ int r;
+
+ reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
+ if (!reply_q) {
+ printk(MPT2SAS_ERR_FMT "unable to allocate memory %d!\n",
+ ioc->name, (int)sizeof(struct adapter_reply_queue));
+ return -ENOMEM;
+ }
+ reply_q->ioc = ioc;
+ reply_q->msix_index = index;
+ reply_q->vector = vector;
+ atomic_set(&reply_q->busy, 0);
+ if (ioc->msix_enable)
+ snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
+ MPT2SAS_DRIVER_NAME, ioc->id, index);
+ else
+ snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
+ MPT2SAS_DRIVER_NAME, ioc->id);
+ r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
+ reply_q);
+ if (r) {
+ printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n",
+ reply_q->name, vector);
+ kfree(reply_q);
+ return -EBUSY;
+ }
+
+ INIT_LIST_HEAD(&reply_q->list);
+ list_add_tail(&reply_q->list, &ioc->reply_queue_list);
+ return 0;
+}
+
+/**
+ * _base_assign_reply_queues - assigning msix index for each cpu
+ * @ioc: per adapter object
+ *
+ * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
+ *
+ * It would nice if we could call irq_set_affinity, however it is not
+ * an exported symbol
+ */
+static void
+_base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct adapter_reply_queue *reply_q;
+ int cpu_id;
+ int cpu_grouping, loop, grouping, grouping_mod;
+
+ if (!_base_is_controller_msix_enabled(ioc))
+ return;
+
+ memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
+ /* when there are more cpus than available msix vectors,
+ * then group cpus togeather on same irq
+ */
+ if (ioc->cpu_count > ioc->msix_vector_count) {
+ grouping = ioc->cpu_count / ioc->msix_vector_count;
+ grouping_mod = ioc->cpu_count % ioc->msix_vector_count;
+ if (grouping < 2 || (grouping == 2 && !grouping_mod))
+ cpu_grouping = 2;
+ else if (grouping < 4 || (grouping == 4 && !grouping_mod))
+ cpu_grouping = 4;
+ else if (grouping < 8 || (grouping == 8 && !grouping_mod))
+ cpu_grouping = 8;
+ else
+ cpu_grouping = 16;
+ } else
+ cpu_grouping = 0;
+
+ loop = 0;
+ reply_q = list_entry(ioc->reply_queue_list.next,
+ struct adapter_reply_queue, list);
+ for_each_online_cpu(cpu_id) {
+ if (!cpu_grouping) {
+ ioc->cpu_msix_table[cpu_id] = reply_q->msix_index;
+ reply_q = list_entry(reply_q->list.next,
+ struct adapter_reply_queue, list);
+ } else {
+ if (loop < cpu_grouping) {
+ ioc->cpu_msix_table[cpu_id] =
+ reply_q->msix_index;
+ loop++;
+ } else {
+ reply_q = list_entry(reply_q->list.next,
+ struct adapter_reply_queue, list);
+ ioc->cpu_msix_table[cpu_id] =
+ reply_q->msix_index;
+ loop = 1;
+ }
+ }
+ }
+}
+
+/**
* _base_disable_msix - disables msix
* @ioc: per adapter object
*
@@ -1161,8 +1316,6 @@
{
if (ioc->msix_enable) {
pci_disable_msix(ioc->pdev);
- kfree(ioc->msix_table_backup);
- ioc->msix_table_backup = NULL;
ioc->msix_enable = 0;
}
}
@@ -1175,10 +1328,13 @@
static int
_base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
{
- struct msix_entry entries;
+ struct msix_entry *entries, *a;
int r;
+ int i;
u8 try_msix = 0;
+ INIT_LIST_HEAD(&ioc->reply_queue_list);
+
if (msix_disable == -1 || msix_disable == 0)
try_msix = 1;
@@ -1188,51 +1344,48 @@
if (_base_check_enable_msix(ioc) != 0)
goto try_ioapic;
- ioc->msix_table_backup = kcalloc(ioc->msix_vector_count,
- sizeof(u32), GFP_KERNEL);
- if (!ioc->msix_table_backup) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
- "msix_table_backup failed!!!\n", ioc->name));
+ ioc->reply_queue_count = min_t(u8, ioc->cpu_count,
+ ioc->msix_vector_count);
+
+ entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (!entries) {
+ dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "kcalloc "
+ "failed @ at %s:%d/%s() !!!\n", ioc->name, __FILE__,
+ __LINE__, __func__));
goto try_ioapic;
}
- memset(&entries, 0, sizeof(struct msix_entry));
- r = pci_enable_msix(ioc->pdev, &entries, 1);
+ for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
+ a->entry = i;
+
+ r = pci_enable_msix(ioc->pdev, entries, ioc->reply_queue_count);
if (r) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "pci_enable_msix "
"failed (r=%d) !!!\n", ioc->name, r));
+ kfree(entries);
goto try_ioapic;
}
- r = request_irq(entries.vector, _base_interrupt, IRQF_SHARED,
- ioc->name, ioc);
- if (r) {
- dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "unable to allocate "
- "interrupt %d !!!\n", ioc->name, entries.vector));
- pci_disable_msix(ioc->pdev);
- goto try_ioapic;
- }
-
- ioc->pci_irq = entries.vector;
ioc->msix_enable = 1;
+ for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
+ r = _base_request_irq(ioc, i, a->vector);
+ if (r) {
+ _base_free_irq(ioc);
+ _base_disable_msix(ioc);
+ kfree(entries);
+ goto try_ioapic;
+ }
+ }
+
+ kfree(entries);
return 0;
/* failback to io_apic interrupt routing */
try_ioapic:
- r = request_irq(ioc->pdev->irq, _base_interrupt, IRQF_SHARED,
- ioc->name, ioc);
- if (r) {
- printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n",
- ioc->name, ioc->pdev->irq);
- r = -EBUSY;
- goto out_fail;
- }
+ r = _base_request_irq(ioc, 0, ioc->pdev->irq);
- ioc->pci_irq = ioc->pdev->irq;
- return 0;
-
- out_fail:
return r;
}
@@ -1251,6 +1404,7 @@
int i, r = 0;
u64 pio_chip = 0;
u64 chip_phys = 0;
+ struct adapter_reply_queue *reply_q;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n",
ioc->name, __func__));
@@ -1313,9 +1467,11 @@
if (r)
goto out_fail;
- printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
- ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
- "IO-APIC enabled"), ioc->pci_irq);
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
+ printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
+ reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
+ "IO-APIC enabled"), reply_q->vector);
+
printk(MPT2SAS_INFO_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n",
@@ -1330,7 +1486,6 @@
if (ioc->chip_phys)
iounmap(ioc->chip);
ioc->chip_phys = 0;
- ioc->pci_irq = -1;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
@@ -1577,6 +1732,12 @@
}
#endif
+static inline u8
+_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
+{
+ return ioc->cpu_msix_table[smp_processor_id()];
+}
+
/**
* mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
* @ioc: per adapter object
@@ -1593,7 +1754,7 @@
descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
- descriptor.SCSIIO.MSIxIndex = 0; /* TODO */
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
descriptor.SCSIIO.SMID = cpu_to_le16(smid);
descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
descriptor.SCSIIO.LMID = 0;
@@ -1617,7 +1778,7 @@
descriptor.HighPriority.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
- descriptor.HighPriority.MSIxIndex = 0; /* TODO */
+ descriptor.HighPriority.MSIxIndex = 0;
descriptor.HighPriority.SMID = cpu_to_le16(smid);
descriptor.HighPriority.LMID = 0;
descriptor.HighPriority.Reserved1 = 0;
@@ -1639,7 +1800,7 @@
u64 *request = (u64 *)&descriptor;
descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
- descriptor.Default.MSIxIndex = 0; /* TODO */
+ descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
descriptor.Default.SMID = cpu_to_le16(smid);
descriptor.Default.LMID = 0;
descriptor.Default.DescriptorTypeDependent = 0;
@@ -1664,7 +1825,7 @@
descriptor.SCSITarget.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
- descriptor.SCSITarget.MSIxIndex = 0; /* TODO */
+ descriptor.SCSITarget.MSIxIndex = _base_get_msix_index(ioc);
descriptor.SCSITarget.SMID = cpu_to_le16(smid);
descriptor.SCSITarget.LMID = 0;
descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
@@ -2171,7 +2332,7 @@
u16 max_sge_elements;
u16 num_of_reply_frames;
u16 chains_needed_per_io;
- u32 sz, total_sz;
+ u32 sz, total_sz, reply_post_free_sz;
u32 retry_sz;
u16 max_request_credit;
int i;
@@ -2498,7 +2659,12 @@
total_sz += sz;
/* reply post queue, 16 byte align */
- sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t);
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+ if (_base_is_controller_msix_enabled(ioc))
+ sz = reply_post_free_sz * ioc->reply_queue_count;
+ else
+ sz = reply_post_free_sz;
ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
ioc->pdev, sz, 16, 0);
if (!ioc->reply_post_free_dma_pool) {
@@ -3186,6 +3352,7 @@
facts->MaxChainDepth = mpi_reply.MaxChainDepth;
facts->WhoInit = mpi_reply.WhoInit;
facts->NumberOfPorts = mpi_reply.NumberOfPorts;
+ facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
facts->MaxReplyDescriptorPostQueueDepth =
le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
@@ -3243,7 +3410,8 @@
mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
-
+ if (_base_is_controller_msix_enabled(ioc))
+ mpi_request.HostMSIxVectors = ioc->reply_queue_count;
mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
mpi_request.ReplyDescriptorPostQueueDepth =
cpu_to_le16(ioc->reply_post_queue_depth);
@@ -3512,9 +3680,6 @@
u32 hcb_size;
printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name);
-
- _base_save_msix_table(ioc);
-
drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n",
ioc->name));
@@ -3610,7 +3775,6 @@
goto out;
}
- _base_restore_msix_table(ioc);
printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name);
return 0;
@@ -3691,6 +3855,9 @@
u16 smid;
struct _tr_list *delayed_tr, *delayed_tr_next;
u8 hide_flag;
+ struct adapter_reply_queue *reply_q;
+ long reply_post_free;
+ u32 reply_post_free_sz;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
@@ -3756,19 +3923,43 @@
ioc->reply_sz)
ioc->reply_free[i] = cpu_to_le32(reply_address);
+ /* initialize reply queues */
+ _base_assign_reply_queues(ioc);
+
/* initialize Reply Post Free Queue */
- for (i = 0; i < ioc->reply_post_queue_depth; i++)
- ioc->reply_post_free[i].Words = cpu_to_le64(ULLONG_MAX);
+ reply_post_free = (long)ioc->reply_post_free;
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ reply_q->reply_post_host_index = 0;
+ reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
+ reply_post_free;
+ for (i = 0; i < ioc->reply_post_queue_depth; i++)
+ reply_q->reply_post_free[i].Words =
+ cpu_to_le64(ULLONG_MAX);
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_free_queue;
+ reply_post_free += reply_post_free_sz;
+ }
+ skip_init_reply_post_free_queue:
r = _base_send_ioc_init(ioc, sleep_flag);
if (r)
return r;
- /* initialize the index's */
+ /* initialize reply free host index */
ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
- ioc->reply_post_host_index = 0;
writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
- writel(0, &ioc->chip->ReplyPostHostIndex);
+
+ /* initialize reply post host index */
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
+ &ioc->chip->ReplyPostHostIndex);
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_host_index;
+ }
+
+ skip_init_reply_post_host_index:
_base_unmask_interrupts(ioc);
r = _base_event_notification(ioc, sleep_flag);
@@ -3819,14 +4010,10 @@
ioc->shost_recovery = 1;
_base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
ioc->shost_recovery = 0;
- if (ioc->pci_irq) {
- synchronize_irq(pdev->irq);
- free_irq(ioc->pci_irq, ioc);
- }
+ _base_free_irq(ioc);
_base_disable_msix(ioc);
if (ioc->chip_phys)
iounmap(ioc->chip);
- ioc->pci_irq = -1;
ioc->chip_phys = 0;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_pcie_error_reporting(pdev);
@@ -3844,14 +4031,50 @@
mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
{
int r, i;
+ int cpu_id, last_cpu_id = 0;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
+ /* setup cpu_msix_table */
+ ioc->cpu_count = num_online_cpus();
+ for_each_online_cpu(cpu_id)
+ last_cpu_id = cpu_id;
+ ioc->cpu_msix_table_sz = last_cpu_id + 1;
+ ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
+ ioc->reply_queue_count = 1;
+ if (!ioc->cpu_msix_table) {
+ dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
+ "cpu_msix_table failed!!!\n", ioc->name));
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
+ sizeof(resource_size_t *), GFP_KERNEL);
+ if (!ioc->reply_post_host_index) {
+ dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation "
+ "for cpu_msix_table failed!!!\n", ioc->name));
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+ }
+
r = mpt2sas_base_map_resources(ioc);
if (r)
return r;
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index[0] =
+ (resource_size_t *)&ioc->chip->ReplyPostHostIndex;
+
+ for (i = 1; i < ioc->cpu_msix_table_sz; i++)
+ ioc->reply_post_host_index[i] = (resource_size_t *)
+ ((u8 *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
+ * 4)));
+ }
+
pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_get_ioc_facts(ioc, CAN_SLEEP);
if (r)
@@ -3972,6 +4195,9 @@
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
+ kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
@@ -4009,6 +4235,9 @@
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
+ kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
kfree(ioc->pfacts);
kfree(ioc->ctl_cmds.reply);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 8d5be21..59354db 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,11 +69,11 @@
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "09.100.00.00"
+#define MPT2SAS_DRIVER_VERSION "09.100.00.01"
#define MPT2SAS_MAJOR_VERSION 09
#define MPT2SAS_MINOR_VERSION 100
#define MPT2SAS_BUILD_VERSION 00
-#define MPT2SAS_RELEASE_VERSION 00
+#define MPT2SAS_RELEASE_VERSION 01
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
@@ -544,6 +544,28 @@
typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
+/**
+ * struct adapter_reply_queue - the reply queue struct
+ * @ioc: per adapter object
+ * @msix_index: msix index into vector table
+ * @vector: irq vector
+ * @reply_post_host_index: head index in the pool where FW completes IO
+ * @reply_post_free: reply post base virt address
+ * @name: the name registered to request_irq()
+ * @busy: isr is actively processing replies on another cpu
+ * @list: this list
+*/
+struct adapter_reply_queue {
+ struct MPT2SAS_ADAPTER *ioc;
+ u8 msix_index;
+ unsigned int vector;
+ u32 reply_post_host_index;
+ Mpi2ReplyDescriptorsUnion_t *reply_post_free;
+ char name[MPT_NAME_LENGTH];
+ atomic_t busy;
+ struct list_head list;
+};
+
/* IOC Facts and Port Facts converted from little endian to cpu */
union mpi2_version_union {
MPI2_VERSION_STRUCT Struct;
@@ -606,7 +628,7 @@
* @list: ioc_list
* @shost: shost object
* @id: unique adapter id
- * @pci_irq: irq number
+ * @cpu_count: number online cpus
* @name: generic ioc string
* @tmp_string: tmp string used for logging
* @pdev: pci pdev object
@@ -636,8 +658,8 @@
* @wait_for_port_enable_to_complete:
* @msix_enable: flag indicating msix is enabled
* @msix_vector_count: number msix vectors
- * @msix_table: virt address to the msix table
- * @msix_table_backup: backup msix table
+ * @cpu_msix_table: table for mapping cpus to msix index
+ * @cpu_msix_table_sz: table size
* @scsi_io_cb_idx: shost generated commands
* @tm_cb_idx: task management commands
* @scsih_cb_idx: scsih internal commands
@@ -728,7 +750,8 @@
* @reply_post_queue_depth: reply post queue depth
* @reply_post_free: pool for reply post (64bit descriptor)
* @reply_post_free_dma:
- * @reply_post_free_dma_pool:
+ * @reply_queue_count: number of reply queue's
+ * @reply_queue_list: link list contaning the reply queue info
* @reply_post_host_index: head index in the pool where FW completes IO
* @delayed_tr_list: target reset link list
* @delayed_tr_volume_list: volume target reset link list
@@ -737,7 +760,7 @@
struct list_head list;
struct Scsi_Host *shost;
u8 id;
- u32 pci_irq;
+ int cpu_count;
char name[MPT_NAME_LENGTH];
char tmp_string[MPT_STRING_LENGTH];
struct pci_dev *pdev;
@@ -779,8 +802,9 @@
u8 msix_enable;
u16 msix_vector_count;
- u32 *msix_table;
- u32 *msix_table_backup;
+ u8 *cpu_msix_table;
+ resource_size_t **reply_post_host_index;
+ u16 cpu_msix_table_sz;
u32 ioc_reset_count;
/* internal commands, callback index */
@@ -911,7 +935,8 @@
Mpi2ReplyDescriptorsUnion_t *reply_post_free;
dma_addr_t reply_post_free_dma;
struct dma_pool *reply_post_free_dma_pool;
- u32 reply_post_host_index;
+ u8 reply_queue_count;
+ struct list_head reply_queue_list;
struct list_head delayed_tr_list;
struct list_head delayed_tr_volume_list;
@@ -955,6 +980,7 @@
void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
__le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
u16 smid);
+void mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc);
/* hi-priority queue */
u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 246d5fb..9adb013 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -2704,6 +2704,33 @@
static DEVICE_ATTR(ioc_reset_count, S_IRUGO,
_ctl_ioc_reset_count_show, NULL);
+/**
+ * _ctl_ioc_reply_queue_count_show - number of reply queues
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is number of reply queues
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_ioc_reply_queue_count_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ u8 reply_queue_count;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ if ((ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
+ reply_queue_count = ioc->reply_queue_count;
+ else
+ reply_queue_count = 1;
+ return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
+}
+static DEVICE_ATTR(reply_queue_count, S_IRUGO,
+ _ctl_ioc_reply_queue_count_show, NULL);
+
struct DIAG_BUFFER_START {
__le32 Size;
__le32 DiagVersion;
@@ -2914,6 +2941,7 @@
&dev_attr_host_trace_buffer_size,
&dev_attr_host_trace_buffer,
&dev_attr_host_trace_buffer_enable,
+ &dev_attr_reply_queue_count,
NULL,
};
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 5202de3..1da1aa1 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2161,6 +2161,7 @@
return 1;
if (ioc->tm_cmds.smid != smid)
return 1;
+ mpt2sas_base_flush_reply_queues(ioc);
ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
@@ -7353,6 +7354,7 @@
}
sas_remove_host(shost);
+ mpt2sas_base_detach(ioc);
list_del(&ioc->list);
scsi_remove_host(shost);
scsi_host_put(shost);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 15c7980..2307322 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -163,7 +163,7 @@
return -EIO;
}
- memset(identify, 0, sizeof(identify));
+ memset(identify, 0, sizeof(*identify));
device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
/* sas_address */
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
index 3501291..7e423e5 100644
--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -398,6 +398,16 @@
/* init phys */
mvs_phy_hacks(mvi);
+ /* disable non data frame retry */
+ tmp = mvs_cr32(mvi, CMD_SAS_CTL1);
+ if ((revision == VANIR_A0_REV) ||
+ (revision == VANIR_B0_REV) ||
+ (revision == VANIR_C0_REV)) {
+ tmp &= ~0xffff;
+ tmp |= 0x007f;
+ mvs_cw32(mvi, CMD_SAS_CTL1, tmp);
+ }
+
/* set LED blink when IO*/
mw32(MVS_PA_VSR_ADDR, VSR_PHY_ACT_LED);
tmp = mr32(MVS_PA_VSR_PORT);
@@ -500,6 +510,27 @@
tmp |= CINT_PHY_MASK;
mw32(MVS_INT_MASK, tmp);
+ tmp = mvs_cr32(mvi, CMD_LINK_TIMER);
+ tmp |= 0xFFFF0000;
+ mvs_cw32(mvi, CMD_LINK_TIMER, tmp);
+
+ /* tune STP performance */
+ tmp = 0x003F003F;
+ mvs_cw32(mvi, CMD_PL_TIMER, tmp);
+
+ /* This can improve expander large block size seq write performance */
+ tmp = mvs_cr32(mvi, CMD_PORT_LAYER_TIMER1);
+ tmp |= 0xFFFF007F;
+ mvs_cw32(mvi, CMD_PORT_LAYER_TIMER1, tmp);
+
+ /* change the connection open-close behavior (bit 9)
+ * set bit8 to 1 for performance tuning */
+ tmp = mvs_cr32(mvi, CMD_SL_MODE0);
+ tmp |= 0x00000300;
+ /* set bit0 to 0 to enable retry for no_dest reject case */
+ tmp &= 0xFFFFFFFE;
+ mvs_cw32(mvi, CMD_SL_MODE0, tmp);
+
/* Enable SRS interrupt */
mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
@@ -823,6 +854,10 @@
phy->att_dev_info = PORT_DEV_STP_TRGT | 1;
}
+ /* enable spin up bit */
+ mvs_write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
+ mvs_write_port_cfg_data(mvi, i, 0x04);
+
}
void mvs_94xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
index dec7cad..f545194 100644
--- a/drivers/scsi/mvsas/mv_defs.h
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -387,6 +387,8 @@
CMD_SL_MODE0 = 0x1BC, /* SL Mode 0 */
CMD_SL_MODE1 = 0x1C0, /* SL Mode 1 */
CMD_PND_FIFO_CTL1 = 0x1C4, /* Pending FIFO Control 1 */
+ CMD_PORT_LAYER_TIMER1 = 0x1E0, /* Port Layer Timer 1 */
+ CMD_LINK_TIMER = 0x1E4, /* Link Timer */
};
enum mvs_info_flags {
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 4e9af66..621b5e0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -59,7 +59,7 @@
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
- .slave_configure = mvs_slave_configure,
+ .slave_configure = sas_slave_configure,
.slave_destroy = sas_slave_destroy,
.scan_finished = mvs_scan_finished,
.scan_start = mvs_scan_start,
@@ -74,7 +74,7 @@
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
- .slave_alloc = mvs_slave_alloc,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = mvst_host_attrs,
@@ -707,6 +707,15 @@
{ PCI_VDEVICE(TTI, 0x2760), chip_9480 },
{
.vendor = 0x1b4b,
+ .device = 0x9480,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x9480,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_9480,
+ },
+ {
+ .vendor = 0x1b4b,
.device = 0x9445,
.subvendor = PCI_ANY_ID,
.subdevice = 0x9480,
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index 4958fef..a4884a5 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -214,7 +214,7 @@
break;
case PHY_FUNC_RELEASE_SPINUP_HOLD:
default:
- rc = -EOPNOTSUPP;
+ rc = -ENOSYS;
}
msleep(200);
return rc;
@@ -265,6 +265,12 @@
id->dev_type = phy->identify.device_type;
id->initiator_bits = SAS_PROTOCOL_ALL;
id->target_bits = phy->identify.target_port_protocols;
+
+ /* direct attached SAS device */
+ if (phy->att_dev_info & PORT_SSP_TRGT_MASK) {
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
+ MVS_CHIP_DISP->write_port_cfg_data(mvi, i, 0x00);
+ }
} else if (phy->phy_type & PORT_TYPE_SATA) {
/*Nothing*/
}
@@ -276,36 +282,6 @@
PORTE_BYTES_DMAED);
}
-int mvs_slave_alloc(struct scsi_device *scsi_dev)
-{
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
- if (dev_is_sata(dev)) {
- /* We don't need to rescan targets
- * if REPORT_LUNS request is failed
- */
- if (scsi_dev->lun > 0)
- return -ENXIO;
- scsi_dev->tagged_supported = 1;
- }
-
- return sas_slave_alloc(scsi_dev);
-}
-
-int mvs_slave_configure(struct scsi_device *sdev)
-{
- struct domain_device *dev = sdev_to_domain_dev(sdev);
- int ret = sas_slave_configure(sdev);
-
- if (ret)
- return ret;
- if (!dev_is_sata(dev)) {
- sas_change_queue_depth(sdev,
- MVS_QUEUE_SIZE,
- SCSI_QDEPTH_DEFAULT);
- }
- return 0;
-}
-
void mvs_scan_start(struct Scsi_Host *shost)
{
int i, j;
@@ -426,7 +402,7 @@
/* generate open address frame hdr (first 12 bytes) */
/* initiator, SMP, ftype 1h */
buf_oaf[0] = (1 << 7) | (PROTOCOL_SMP << 4) | 0x01;
- buf_oaf[1] = dev->linkrate & 0xf;
+ buf_oaf[1] = min(sas_port->linkrate, dev->linkrate) & 0xf;
*(u16 *)(buf_oaf + 2) = 0xFFFF; /* SAS SPEC */
memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
@@ -571,7 +547,7 @@
/* generate open address frame hdr (first 12 bytes) */
/* initiator, STP, ftype 1h */
buf_oaf[0] = (1 << 7) | (PROTOCOL_STP << 4) | 0x1;
- buf_oaf[1] = dev->linkrate & 0xf;
+ buf_oaf[1] = min(sas_port->linkrate, dev->linkrate) & 0xf;
*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
@@ -679,7 +655,7 @@
/* generate open address frame hdr (first 12 bytes) */
/* initiator, SSP, ftype 1h */
buf_oaf[0] = (1 << 7) | (PROTOCOL_SSP << 4) | 0x1;
- buf_oaf[1] = dev->linkrate & 0xf;
+ buf_oaf[1] = min(sas_port->linkrate, dev->linkrate) & 0xf;
*(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
@@ -1241,6 +1217,12 @@
port->wide_port_phymap = sas_port->phy_mask;
mv_printk("set wide port phy map %x\n", sas_port->phy_mask);
mvs_update_wideport(mvi, sas_phy->id);
+
+ /* direct attached SAS device */
+ if (phy->att_dev_info & PORT_SSP_TRGT_MASK) {
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
+ MVS_CHIP_DISP->write_port_cfg_data(mvi, i, 0x04);
+ }
}
if (lock)
spin_unlock_irqrestore(&mvi->lock, flags);
@@ -1387,28 +1369,6 @@
mvs_dev_gone_notify(dev);
}
-static struct sas_task *mvs_alloc_task(void)
-{
- struct sas_task *task = kzalloc(sizeof(struct sas_task), GFP_KERNEL);
-
- if (task) {
- INIT_LIST_HEAD(&task->list);
- spin_lock_init(&task->task_state_lock);
- task->task_state_flags = SAS_TASK_STATE_PENDING;
- init_timer(&task->timer);
- init_completion(&task->completion);
- }
- return task;
-}
-
-static void mvs_free_task(struct sas_task *task)
-{
- if (task) {
- BUG_ON(!list_empty(&task->list));
- kfree(task);
- }
-}
-
static void mvs_task_done(struct sas_task *task)
{
if (!del_timer(&task->timer))
@@ -1432,7 +1392,7 @@
struct sas_task *task = NULL;
for (retry = 0; retry < 3; retry++) {
- task = mvs_alloc_task();
+ task = sas_alloc_task(GFP_KERNEL);
if (!task)
return -ENOMEM;
@@ -1490,15 +1450,14 @@
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat);
- mvs_free_task(task);
+ sas_free_task(task);
task = NULL;
}
}
ex_err:
BUG_ON(retry == 3 && task != NULL);
- if (task != NULL)
- mvs_free_task(task);
+ sas_free_task(task);
return res;
}
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 44b4745..c04a4f5 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -46,7 +46,7 @@
#include "mv_defs.h"
#define DRV_NAME "mvsas"
-#define DRV_VERSION "0.8.2"
+#define DRV_VERSION "0.8.16"
#define MVS_ID_NOT_MAPPED 0x7f
#define WIDE_PORT_MAX_PHY 4
#define mv_printk(fmt, arg ...) \
@@ -458,8 +458,6 @@
void *funcdata);
void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
u32 off_lo, u32 off_hi, u64 sas_addr);
-int mvs_slave_alloc(struct scsi_device *scsi_dev);
-int mvs_slave_configure(struct scsi_device *sdev);
void mvs_scan_start(struct Scsi_Host *shost);
int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
int mvs_queue_command(struct sas_task *task, const int num,
diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
new file mode 100644
index 0000000..88cf1db
--- /dev/null
+++ b/drivers/scsi/mvumi.c
@@ -0,0 +1,2018 @@
+/*
+ * Marvell UMI driver
+ *
+ * Copyright 2011 Marvell. <jyli@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/io.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_eh.h>
+#include <linux/uaccess.h>
+
+#include "mvumi.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("jyli@marvell.com");
+MODULE_DESCRIPTION("Marvell UMI Driver");
+
+static DEFINE_PCI_DEVICE_TABLE(mvumi_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_2, PCI_DEVICE_ID_MARVELL_MV9143) },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, mvumi_pci_table);
+
+static void tag_init(struct mvumi_tag *st, unsigned short size)
+{
+ unsigned short i;
+ BUG_ON(size != st->size);
+ st->top = size;
+ for (i = 0; i < size; i++)
+ st->stack[i] = size - 1 - i;
+}
+
+static unsigned short tag_get_one(struct mvumi_hba *mhba, struct mvumi_tag *st)
+{
+ BUG_ON(st->top <= 0);
+ return st->stack[--st->top];
+}
+
+static void tag_release_one(struct mvumi_hba *mhba, struct mvumi_tag *st,
+ unsigned short tag)
+{
+ BUG_ON(st->top >= st->size);
+ st->stack[st->top++] = tag;
+}
+
+static bool tag_is_empty(struct mvumi_tag *st)
+{
+ if (st->top == 0)
+ return 1;
+ else
+ return 0;
+}
+
+static void mvumi_unmap_pci_addr(struct pci_dev *dev, void **addr_array)
+{
+ int i;
+
+ for (i = 0; i < MAX_BASE_ADDRESS; i++)
+ if ((pci_resource_flags(dev, i) & IORESOURCE_MEM) &&
+ addr_array[i])
+ pci_iounmap(dev, addr_array[i]);
+}
+
+static int mvumi_map_pci_addr(struct pci_dev *dev, void **addr_array)
+{
+ int i;
+
+ for (i = 0; i < MAX_BASE_ADDRESS; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
+ addr_array[i] = pci_iomap(dev, i, 0);
+ if (!addr_array[i]) {
+ dev_err(&dev->dev, "failed to map Bar[%d]\n",
+ i);
+ mvumi_unmap_pci_addr(dev, addr_array);
+ return -ENOMEM;
+ }
+ } else
+ addr_array[i] = NULL;
+
+ dev_dbg(&dev->dev, "Bar %d : %p.\n", i, addr_array[i]);
+ }
+
+ return 0;
+}
+
+static struct mvumi_res *mvumi_alloc_mem_resource(struct mvumi_hba *mhba,
+ enum resource_type type, unsigned int size)
+{
+ struct mvumi_res *res = kzalloc(sizeof(*res), GFP_KERNEL);
+
+ if (!res) {
+ dev_err(&mhba->pdev->dev,
+ "Failed to allocate memory for resouce manager.\n");
+ return NULL;
+ }
+
+ switch (type) {
+ case RESOURCE_CACHED_MEMORY:
+ res->virt_addr = kzalloc(size, GFP_KERNEL);
+ if (!res->virt_addr) {
+ dev_err(&mhba->pdev->dev,
+ "unable to allocate memory,size = %d.\n", size);
+ kfree(res);
+ return NULL;
+ }
+ break;
+
+ case RESOURCE_UNCACHED_MEMORY:
+ size = round_up(size, 8);
+ res->virt_addr = pci_alloc_consistent(mhba->pdev, size,
+ &res->bus_addr);
+ if (!res->virt_addr) {
+ dev_err(&mhba->pdev->dev,
+ "unable to allocate consistent mem,"
+ "size = %d.\n", size);
+ kfree(res);
+ return NULL;
+ }
+ memset(res->virt_addr, 0, size);
+ break;
+
+ default:
+ dev_err(&mhba->pdev->dev, "unknown resource type %d.\n", type);
+ kfree(res);
+ return NULL;
+ }
+
+ res->type = type;
+ res->size = size;
+ INIT_LIST_HEAD(&res->entry);
+ list_add_tail(&res->entry, &mhba->res_list);
+
+ return res;
+}
+
+static void mvumi_release_mem_resource(struct mvumi_hba *mhba)
+{
+ struct mvumi_res *res, *tmp;
+
+ list_for_each_entry_safe(res, tmp, &mhba->res_list, entry) {
+ switch (res->type) {
+ case RESOURCE_UNCACHED_MEMORY:
+ pci_free_consistent(mhba->pdev, res->size,
+ res->virt_addr, res->bus_addr);
+ break;
+ case RESOURCE_CACHED_MEMORY:
+ kfree(res->virt_addr);
+ break;
+ default:
+ dev_err(&mhba->pdev->dev,
+ "unknown resource type %d\n", res->type);
+ break;
+ }
+ list_del(&res->entry);
+ kfree(res);
+ }
+ mhba->fw_flag &= ~MVUMI_FW_ALLOC;
+}
+
+/**
+ * mvumi_make_sgl - Prepares SGL
+ * @mhba: Adapter soft state
+ * @scmd: SCSI command from the mid-layer
+ * @sgl_p: SGL to be filled in
+ * @sg_count return the number of SG elements
+ *
+ * If successful, this function returns 0. otherwise, it returns -1.
+ */
+static int mvumi_make_sgl(struct mvumi_hba *mhba, struct scsi_cmnd *scmd,
+ void *sgl_p, unsigned char *sg_count)
+{
+ struct scatterlist *sg;
+ struct mvumi_sgl *m_sg = (struct mvumi_sgl *) sgl_p;
+ unsigned int i;
+ unsigned int sgnum = scsi_sg_count(scmd);
+ dma_addr_t busaddr;
+
+ if (sgnum) {
+ sg = scsi_sglist(scmd);
+ *sg_count = pci_map_sg(mhba->pdev, sg, sgnum,
+ (int) scmd->sc_data_direction);
+ if (*sg_count > mhba->max_sge) {
+ dev_err(&mhba->pdev->dev, "sg count[0x%x] is bigger "
+ "than max sg[0x%x].\n",
+ *sg_count, mhba->max_sge);
+ return -1;
+ }
+ for (i = 0; i < *sg_count; i++) {
+ busaddr = sg_dma_address(&sg[i]);
+ m_sg->baseaddr_l = cpu_to_le32(lower_32_bits(busaddr));
+ m_sg->baseaddr_h = cpu_to_le32(upper_32_bits(busaddr));
+ m_sg->flags = 0;
+ m_sg->size = cpu_to_le32(sg_dma_len(&sg[i]));
+ if ((i + 1) == *sg_count)
+ m_sg->flags |= SGD_EOT;
+
+ m_sg++;
+ }
+ } else {
+ scmd->SCp.dma_handle = scsi_bufflen(scmd) ?
+ pci_map_single(mhba->pdev, scsi_sglist(scmd),
+ scsi_bufflen(scmd),
+ (int) scmd->sc_data_direction)
+ : 0;
+ busaddr = scmd->SCp.dma_handle;
+ m_sg->baseaddr_l = cpu_to_le32(lower_32_bits(busaddr));
+ m_sg->baseaddr_h = cpu_to_le32(upper_32_bits(busaddr));
+ m_sg->flags = SGD_EOT;
+ m_sg->size = cpu_to_le32(scsi_bufflen(scmd));
+ *sg_count = 1;
+ }
+
+ return 0;
+}
+
+static int mvumi_internal_cmd_sgl(struct mvumi_hba *mhba, struct mvumi_cmd *cmd,
+ unsigned int size)
+{
+ struct mvumi_sgl *m_sg;
+ void *virt_addr;
+ dma_addr_t phy_addr;
+
+ if (size == 0)
+ return 0;
+
+ virt_addr = pci_alloc_consistent(mhba->pdev, size, &phy_addr);
+ if (!virt_addr)
+ return -1;
+
+ memset(virt_addr, 0, size);
+
+ m_sg = (struct mvumi_sgl *) &cmd->frame->payload[0];
+ cmd->frame->sg_counts = 1;
+ cmd->data_buf = virt_addr;
+
+ m_sg->baseaddr_l = cpu_to_le32(lower_32_bits(phy_addr));
+ m_sg->baseaddr_h = cpu_to_le32(upper_32_bits(phy_addr));
+ m_sg->flags = SGD_EOT;
+ m_sg->size = cpu_to_le32(size);
+
+ return 0;
+}
+
+static struct mvumi_cmd *mvumi_create_internal_cmd(struct mvumi_hba *mhba,
+ unsigned int buf_size)
+{
+ struct mvumi_cmd *cmd;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ dev_err(&mhba->pdev->dev, "failed to create a internal cmd\n");
+ return NULL;
+ }
+ INIT_LIST_HEAD(&cmd->queue_pointer);
+
+ cmd->frame = kzalloc(mhba->ib_max_size, GFP_KERNEL);
+ if (!cmd->frame) {
+ dev_err(&mhba->pdev->dev, "failed to allocate memory for FW"
+ " frame,size = %d.\n", mhba->ib_max_size);
+ kfree(cmd);
+ return NULL;
+ }
+
+ if (buf_size) {
+ if (mvumi_internal_cmd_sgl(mhba, cmd, buf_size)) {
+ dev_err(&mhba->pdev->dev, "failed to allocate memory"
+ " for internal frame\n");
+ kfree(cmd->frame);
+ kfree(cmd);
+ return NULL;
+ }
+ } else
+ cmd->frame->sg_counts = 0;
+
+ return cmd;
+}
+
+static void mvumi_delete_internal_cmd(struct mvumi_hba *mhba,
+ struct mvumi_cmd *cmd)
+{
+ struct mvumi_sgl *m_sg;
+ unsigned int size;
+ dma_addr_t phy_addr;
+
+ if (cmd && cmd->frame) {
+ if (cmd->frame->sg_counts) {
+ m_sg = (struct mvumi_sgl *) &cmd->frame->payload[0];
+ size = m_sg->size;
+
+ phy_addr = (dma_addr_t) m_sg->baseaddr_l |
+ (dma_addr_t) ((m_sg->baseaddr_h << 16) << 16);
+
+ pci_free_consistent(mhba->pdev, size, cmd->data_buf,
+ phy_addr);
+ }
+ kfree(cmd->frame);
+ kfree(cmd);
+ }
+}
+
+/**
+ * mvumi_get_cmd - Get a command from the free pool
+ * @mhba: Adapter soft state
+ *
+ * Returns a free command from the pool
+ */
+static struct mvumi_cmd *mvumi_get_cmd(struct mvumi_hba *mhba)
+{
+ struct mvumi_cmd *cmd = NULL;
+
+ if (likely(!list_empty(&mhba->cmd_pool))) {
+ cmd = list_entry((&mhba->cmd_pool)->next,
+ struct mvumi_cmd, queue_pointer);
+ list_del_init(&cmd->queue_pointer);
+ } else
+ dev_warn(&mhba->pdev->dev, "command pool is empty!\n");
+
+ return cmd;
+}
+
+/**
+ * mvumi_return_cmd - Return a cmd to free command pool
+ * @mhba: Adapter soft state
+ * @cmd: Command packet to be returned to free command pool
+ */
+static inline void mvumi_return_cmd(struct mvumi_hba *mhba,
+ struct mvumi_cmd *cmd)
+{
+ cmd->scmd = NULL;
+ list_add_tail(&cmd->queue_pointer, &mhba->cmd_pool);
+}
+
+/**
+ * mvumi_free_cmds - Free all the cmds in the free cmd pool
+ * @mhba: Adapter soft state
+ */
+static void mvumi_free_cmds(struct mvumi_hba *mhba)
+{
+ struct mvumi_cmd *cmd;
+
+ while (!list_empty(&mhba->cmd_pool)) {
+ cmd = list_first_entry(&mhba->cmd_pool, struct mvumi_cmd,
+ queue_pointer);
+ list_del(&cmd->queue_pointer);
+ kfree(cmd->frame);
+ kfree(cmd);
+ }
+}
+
+/**
+ * mvumi_alloc_cmds - Allocates the command packets
+ * @mhba: Adapter soft state
+ *
+ */
+static int mvumi_alloc_cmds(struct mvumi_hba *mhba)
+{
+ int i;
+ struct mvumi_cmd *cmd;
+
+ for (i = 0; i < mhba->max_io; i++) {
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ goto err_exit;
+
+ INIT_LIST_HEAD(&cmd->queue_pointer);
+ list_add_tail(&cmd->queue_pointer, &mhba->cmd_pool);
+ cmd->frame = kzalloc(mhba->ib_max_size, GFP_KERNEL);
+ if (!cmd->frame)
+ goto err_exit;
+ }
+ return 0;
+
+err_exit:
+ dev_err(&mhba->pdev->dev,
+ "failed to allocate memory for cmd[0x%x].\n", i);
+ while (!list_empty(&mhba->cmd_pool)) {
+ cmd = list_first_entry(&mhba->cmd_pool, struct mvumi_cmd,
+ queue_pointer);
+ list_del(&cmd->queue_pointer);
+ kfree(cmd->frame);
+ kfree(cmd);
+ }
+ return -ENOMEM;
+}
+
+static int mvumi_get_ib_list_entry(struct mvumi_hba *mhba, void **ib_entry)
+{
+ unsigned int ib_rp_reg, cur_ib_entry;
+
+ if (atomic_read(&mhba->fw_outstanding) >= mhba->max_io) {
+ dev_warn(&mhba->pdev->dev, "firmware io overflow.\n");
+ return -1;
+ }
+ ib_rp_reg = ioread32(mhba->mmio + CLA_INB_READ_POINTER);
+
+ if (unlikely(((ib_rp_reg & CL_SLOT_NUM_MASK) ==
+ (mhba->ib_cur_slot & CL_SLOT_NUM_MASK)) &&
+ ((ib_rp_reg & CL_POINTER_TOGGLE) !=
+ (mhba->ib_cur_slot & CL_POINTER_TOGGLE)))) {
+ dev_warn(&mhba->pdev->dev, "no free slot to use.\n");
+ return -1;
+ }
+
+ cur_ib_entry = mhba->ib_cur_slot & CL_SLOT_NUM_MASK;
+ cur_ib_entry++;
+ if (cur_ib_entry >= mhba->list_num_io) {
+ cur_ib_entry -= mhba->list_num_io;
+ mhba->ib_cur_slot ^= CL_POINTER_TOGGLE;
+ }
+ mhba->ib_cur_slot &= ~CL_SLOT_NUM_MASK;
+ mhba->ib_cur_slot |= (cur_ib_entry & CL_SLOT_NUM_MASK);
+ *ib_entry = mhba->ib_list + cur_ib_entry * mhba->ib_max_size;
+ atomic_inc(&mhba->fw_outstanding);
+
+ return 0;
+}
+
+static void mvumi_send_ib_list_entry(struct mvumi_hba *mhba)
+{
+ iowrite32(0xfff, mhba->ib_shadow);
+ iowrite32(mhba->ib_cur_slot, mhba->mmio + CLA_INB_WRITE_POINTER);
+}
+
+static char mvumi_check_ob_frame(struct mvumi_hba *mhba,
+ unsigned int cur_obf, struct mvumi_rsp_frame *p_outb_frame)
+{
+ unsigned short tag, request_id;
+
+ udelay(1);
+ p_outb_frame = mhba->ob_list + cur_obf * mhba->ob_max_size;
+ request_id = p_outb_frame->request_id;
+ tag = p_outb_frame->tag;
+ if (tag > mhba->tag_pool.size) {
+ dev_err(&mhba->pdev->dev, "ob frame data error\n");
+ return -1;
+ }
+ if (mhba->tag_cmd[tag] == NULL) {
+ dev_err(&mhba->pdev->dev, "tag[0x%x] with NO command\n", tag);
+ return -1;
+ } else if (mhba->tag_cmd[tag]->request_id != request_id &&
+ mhba->request_id_enabled) {
+ dev_err(&mhba->pdev->dev, "request ID from FW:0x%x,"
+ "cmd request ID:0x%x\n", request_id,
+ mhba->tag_cmd[tag]->request_id);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void mvumi_receive_ob_list_entry(struct mvumi_hba *mhba)
+{
+ unsigned int ob_write_reg, ob_write_shadow_reg;
+ unsigned int cur_obf, assign_obf_end, i;
+ struct mvumi_ob_data *ob_data;
+ struct mvumi_rsp_frame *p_outb_frame;
+
+ do {
+ ob_write_reg = ioread32(mhba->mmio + CLA_OUTB_COPY_POINTER);
+ ob_write_shadow_reg = ioread32(mhba->ob_shadow);
+ } while ((ob_write_reg & CL_SLOT_NUM_MASK) != ob_write_shadow_reg);
+
+ cur_obf = mhba->ob_cur_slot & CL_SLOT_NUM_MASK;
+ assign_obf_end = ob_write_reg & CL_SLOT_NUM_MASK;
+
+ if ((ob_write_reg & CL_POINTER_TOGGLE) !=
+ (mhba->ob_cur_slot & CL_POINTER_TOGGLE)) {
+ assign_obf_end += mhba->list_num_io;
+ }
+
+ for (i = (assign_obf_end - cur_obf); i != 0; i--) {
+ cur_obf++;
+ if (cur_obf >= mhba->list_num_io) {
+ cur_obf -= mhba->list_num_io;
+ mhba->ob_cur_slot ^= CL_POINTER_TOGGLE;
+ }
+
+ p_outb_frame = mhba->ob_list + cur_obf * mhba->ob_max_size;
+
+ /* Copy pointer may point to entry in outbound list
+ * before entry has valid data
+ */
+ if (unlikely(p_outb_frame->tag > mhba->tag_pool.size ||
+ mhba->tag_cmd[p_outb_frame->tag] == NULL ||
+ p_outb_frame->request_id !=
+ mhba->tag_cmd[p_outb_frame->tag]->request_id))
+ if (mvumi_check_ob_frame(mhba, cur_obf, p_outb_frame))
+ continue;
+
+ if (!list_empty(&mhba->ob_data_list)) {
+ ob_data = (struct mvumi_ob_data *)
+ list_first_entry(&mhba->ob_data_list,
+ struct mvumi_ob_data, list);
+ list_del_init(&ob_data->list);
+ } else {
+ ob_data = NULL;
+ if (cur_obf == 0) {
+ cur_obf = mhba->list_num_io - 1;
+ mhba->ob_cur_slot ^= CL_POINTER_TOGGLE;
+ } else
+ cur_obf -= 1;
+ break;
+ }
+
+ memcpy(ob_data->data, p_outb_frame, mhba->ob_max_size);
+ p_outb_frame->tag = 0xff;
+
+ list_add_tail(&ob_data->list, &mhba->free_ob_list);
+ }
+ mhba->ob_cur_slot &= ~CL_SLOT_NUM_MASK;
+ mhba->ob_cur_slot |= (cur_obf & CL_SLOT_NUM_MASK);
+ iowrite32(mhba->ob_cur_slot, mhba->mmio + CLA_OUTB_READ_POINTER);
+}
+
+static void mvumi_reset(void *regs)
+{
+ iowrite32(0, regs + CPU_ENPOINTA_MASK_REG);
+ if (ioread32(regs + CPU_ARM_TO_PCIEA_MSG1) != HANDSHAKE_DONESTATE)
+ return;
+
+ iowrite32(DRBL_SOFT_RESET, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+}
+
+static unsigned char mvumi_start(struct mvumi_hba *mhba);
+
+static int mvumi_wait_for_outstanding(struct mvumi_hba *mhba)
+{
+ mhba->fw_state = FW_STATE_ABORT;
+ mvumi_reset(mhba->mmio);
+
+ if (mvumi_start(mhba))
+ return FAILED;
+ else
+ return SUCCESS;
+}
+
+static int mvumi_host_reset(struct scsi_cmnd *scmd)
+{
+ struct mvumi_hba *mhba;
+
+ mhba = (struct mvumi_hba *) scmd->device->host->hostdata;
+
+ scmd_printk(KERN_NOTICE, scmd, "RESET -%ld cmd=%x retries=%x\n",
+ scmd->serial_number, scmd->cmnd[0], scmd->retries);
+
+ return mvumi_wait_for_outstanding(mhba);
+}
+
+static int mvumi_issue_blocked_cmd(struct mvumi_hba *mhba,
+ struct mvumi_cmd *cmd)
+{
+ unsigned long flags;
+
+ cmd->cmd_status = REQ_STATUS_PENDING;
+
+ if (atomic_read(&cmd->sync_cmd)) {
+ dev_err(&mhba->pdev->dev,
+ "last blocked cmd not finished, sync_cmd = %d\n",
+ atomic_read(&cmd->sync_cmd));
+ BUG_ON(1);
+ return -1;
+ }
+ atomic_inc(&cmd->sync_cmd);
+ spin_lock_irqsave(mhba->shost->host_lock, flags);
+ mhba->instancet->fire_cmd(mhba, cmd);
+ spin_unlock_irqrestore(mhba->shost->host_lock, flags);
+
+ wait_event_timeout(mhba->int_cmd_wait_q,
+ (cmd->cmd_status != REQ_STATUS_PENDING),
+ MVUMI_INTERNAL_CMD_WAIT_TIME * HZ);
+
+ /* command timeout */
+ if (atomic_read(&cmd->sync_cmd)) {
+ spin_lock_irqsave(mhba->shost->host_lock, flags);
+ atomic_dec(&cmd->sync_cmd);
+ if (mhba->tag_cmd[cmd->frame->tag]) {
+ mhba->tag_cmd[cmd->frame->tag] = 0;
+ dev_warn(&mhba->pdev->dev, "TIMEOUT:release tag [%d]\n",
+ cmd->frame->tag);
+ tag_release_one(mhba, &mhba->tag_pool, cmd->frame->tag);
+ }
+ if (!list_empty(&cmd->queue_pointer)) {
+ dev_warn(&mhba->pdev->dev,
+ "TIMEOUT:A internal command doesn't send!\n");
+ list_del_init(&cmd->queue_pointer);
+ } else
+ atomic_dec(&mhba->fw_outstanding);
+
+ spin_unlock_irqrestore(mhba->shost->host_lock, flags);
+ }
+ return 0;
+}
+
+static void mvumi_release_fw(struct mvumi_hba *mhba)
+{
+ mvumi_free_cmds(mhba);
+ mvumi_release_mem_resource(mhba);
+ mvumi_unmap_pci_addr(mhba->pdev, mhba->base_addr);
+ kfree(mhba->handshake_page);
+ pci_release_regions(mhba->pdev);
+}
+
+static unsigned char mvumi_flush_cache(struct mvumi_hba *mhba)
+{
+ struct mvumi_cmd *cmd;
+ struct mvumi_msg_frame *frame;
+ unsigned char device_id, retry = 0;
+ unsigned char bitcount = sizeof(unsigned char) * 8;
+
+ for (device_id = 0; device_id < mhba->max_target_id; device_id++) {
+ if (!(mhba->target_map[device_id / bitcount] &
+ (1 << (device_id % bitcount))))
+ continue;
+get_cmd: cmd = mvumi_create_internal_cmd(mhba, 0);
+ if (!cmd) {
+ if (retry++ >= 5) {
+ dev_err(&mhba->pdev->dev, "failed to get memory"
+ " for internal flush cache cmd for "
+ "device %d", device_id);
+ retry = 0;
+ continue;
+ } else
+ goto get_cmd;
+ }
+ cmd->scmd = NULL;
+ cmd->cmd_status = REQ_STATUS_PENDING;
+ atomic_set(&cmd->sync_cmd, 0);
+ frame = cmd->frame;
+ frame->req_function = CL_FUN_SCSI_CMD;
+ frame->device_id = device_id;
+ frame->cmd_flag = CMD_FLAG_NON_DATA;
+ frame->data_transfer_length = 0;
+ frame->cdb_length = MAX_COMMAND_SIZE;
+ memset(frame->cdb, 0, MAX_COMMAND_SIZE);
+ frame->cdb[0] = SCSI_CMD_MARVELL_SPECIFIC;
+ frame->cdb[2] = CDB_CORE_SHUTDOWN;
+
+ mvumi_issue_blocked_cmd(mhba, cmd);
+ if (cmd->cmd_status != SAM_STAT_GOOD) {
+ dev_err(&mhba->pdev->dev,
+ "device %d flush cache failed, status=0x%x.\n",
+ device_id, cmd->cmd_status);
+ }
+
+ mvumi_delete_internal_cmd(mhba, cmd);
+ }
+ return 0;
+}
+
+static unsigned char
+mvumi_calculate_checksum(struct mvumi_hs_header *p_header,
+ unsigned short len)
+{
+ unsigned char *ptr;
+ unsigned char ret = 0, i;
+
+ ptr = (unsigned char *) p_header->frame_content;
+ for (i = 0; i < len; i++) {
+ ret ^= *ptr;
+ ptr++;
+ }
+
+ return ret;
+}
+
+void mvumi_hs_build_page(struct mvumi_hba *mhba,
+ struct mvumi_hs_header *hs_header)
+{
+ struct mvumi_hs_page2 *hs_page2;
+ struct mvumi_hs_page4 *hs_page4;
+ struct mvumi_hs_page3 *hs_page3;
+ struct timeval time;
+ unsigned int local_time;
+
+ switch (hs_header->page_code) {
+ case HS_PAGE_HOST_INFO:
+ hs_page2 = (struct mvumi_hs_page2 *) hs_header;
+ hs_header->frame_length = sizeof(*hs_page2) - 4;
+ memset(hs_header->frame_content, 0, hs_header->frame_length);
+ hs_page2->host_type = 3; /* 3 mean linux*/
+ hs_page2->host_ver.ver_major = VER_MAJOR;
+ hs_page2->host_ver.ver_minor = VER_MINOR;
+ hs_page2->host_ver.ver_oem = VER_OEM;
+ hs_page2->host_ver.ver_build = VER_BUILD;
+ hs_page2->system_io_bus = 0;
+ hs_page2->slot_number = 0;
+ hs_page2->intr_level = 0;
+ hs_page2->intr_vector = 0;
+ do_gettimeofday(&time);
+ local_time = (unsigned int) (time.tv_sec -
+ (sys_tz.tz_minuteswest * 60));
+ hs_page2->seconds_since1970 = local_time;
+ hs_header->checksum = mvumi_calculate_checksum(hs_header,
+ hs_header->frame_length);
+ break;
+
+ case HS_PAGE_FIRM_CTL:
+ hs_page3 = (struct mvumi_hs_page3 *) hs_header;
+ hs_header->frame_length = sizeof(*hs_page3) - 4;
+ memset(hs_header->frame_content, 0, hs_header->frame_length);
+ hs_header->checksum = mvumi_calculate_checksum(hs_header,
+ hs_header->frame_length);
+ break;
+
+ case HS_PAGE_CL_INFO:
+ hs_page4 = (struct mvumi_hs_page4 *) hs_header;
+ hs_header->frame_length = sizeof(*hs_page4) - 4;
+ memset(hs_header->frame_content, 0, hs_header->frame_length);
+ hs_page4->ib_baseaddr_l = lower_32_bits(mhba->ib_list_phys);
+ hs_page4->ib_baseaddr_h = upper_32_bits(mhba->ib_list_phys);
+
+ hs_page4->ob_baseaddr_l = lower_32_bits(mhba->ob_list_phys);
+ hs_page4->ob_baseaddr_h = upper_32_bits(mhba->ob_list_phys);
+ hs_page4->ib_entry_size = mhba->ib_max_size_setting;
+ hs_page4->ob_entry_size = mhba->ob_max_size_setting;
+ hs_page4->ob_depth = mhba->list_num_io;
+ hs_page4->ib_depth = mhba->list_num_io;
+ hs_header->checksum = mvumi_calculate_checksum(hs_header,
+ hs_header->frame_length);
+ break;
+
+ default:
+ dev_err(&mhba->pdev->dev, "cannot build page, code[0x%x]\n",
+ hs_header->page_code);
+ break;
+ }
+}
+
+/**
+ * mvumi_init_data - Initialize requested date for FW
+ * @mhba: Adapter soft state
+ */
+static int mvumi_init_data(struct mvumi_hba *mhba)
+{
+ struct mvumi_ob_data *ob_pool;
+ struct mvumi_res *res_mgnt;
+ unsigned int tmp_size, offset, i;
+ void *virmem, *v;
+ dma_addr_t p;
+
+ if (mhba->fw_flag & MVUMI_FW_ALLOC)
+ return 0;
+
+ tmp_size = mhba->ib_max_size * mhba->max_io;
+ tmp_size += 128 + mhba->ob_max_size * mhba->max_io;
+ tmp_size += 8 + sizeof(u32) + 16;
+
+ res_mgnt = mvumi_alloc_mem_resource(mhba,
+ RESOURCE_UNCACHED_MEMORY, tmp_size);
+ if (!res_mgnt) {
+ dev_err(&mhba->pdev->dev,
+ "failed to allocate memory for inbound list\n");
+ goto fail_alloc_dma_buf;
+ }
+
+ p = res_mgnt->bus_addr;
+ v = res_mgnt->virt_addr;
+ /* ib_list */
+ offset = round_up(p, 128) - p;
+ p += offset;
+ v += offset;
+ mhba->ib_list = v;
+ mhba->ib_list_phys = p;
+ v += mhba->ib_max_size * mhba->max_io;
+ p += mhba->ib_max_size * mhba->max_io;
+ /* ib shadow */
+ offset = round_up(p, 8) - p;
+ p += offset;
+ v += offset;
+ mhba->ib_shadow = v;
+ mhba->ib_shadow_phys = p;
+ p += sizeof(u32);
+ v += sizeof(u32);
+ /* ob shadow */
+ offset = round_up(p, 8) - p;
+ p += offset;
+ v += offset;
+ mhba->ob_shadow = v;
+ mhba->ob_shadow_phys = p;
+ p += 8;
+ v += 8;
+
+ /* ob list */
+ offset = round_up(p, 128) - p;
+ p += offset;
+ v += offset;
+
+ mhba->ob_list = v;
+ mhba->ob_list_phys = p;
+
+ /* ob data pool */
+ tmp_size = mhba->max_io * (mhba->ob_max_size + sizeof(*ob_pool));
+ tmp_size = round_up(tmp_size, 8);
+
+ res_mgnt = mvumi_alloc_mem_resource(mhba,
+ RESOURCE_CACHED_MEMORY, tmp_size);
+ if (!res_mgnt) {
+ dev_err(&mhba->pdev->dev,
+ "failed to allocate memory for outbound data buffer\n");
+ goto fail_alloc_dma_buf;
+ }
+ virmem = res_mgnt->virt_addr;
+
+ for (i = mhba->max_io; i != 0; i--) {
+ ob_pool = (struct mvumi_ob_data *) virmem;
+ list_add_tail(&ob_pool->list, &mhba->ob_data_list);
+ virmem += mhba->ob_max_size + sizeof(*ob_pool);
+ }
+
+ tmp_size = sizeof(unsigned short) * mhba->max_io +
+ sizeof(struct mvumi_cmd *) * mhba->max_io;
+ tmp_size += round_up(mhba->max_target_id, sizeof(unsigned char) * 8) /
+ (sizeof(unsigned char) * 8);
+
+ res_mgnt = mvumi_alloc_mem_resource(mhba,
+ RESOURCE_CACHED_MEMORY, tmp_size);
+ if (!res_mgnt) {
+ dev_err(&mhba->pdev->dev,
+ "failed to allocate memory for tag and target map\n");
+ goto fail_alloc_dma_buf;
+ }
+
+ virmem = res_mgnt->virt_addr;
+ mhba->tag_pool.stack = virmem;
+ mhba->tag_pool.size = mhba->max_io;
+ tag_init(&mhba->tag_pool, mhba->max_io);
+ virmem += sizeof(unsigned short) * mhba->max_io;
+
+ mhba->tag_cmd = virmem;
+ virmem += sizeof(struct mvumi_cmd *) * mhba->max_io;
+
+ mhba->target_map = virmem;
+
+ mhba->fw_flag |= MVUMI_FW_ALLOC;
+ return 0;
+
+fail_alloc_dma_buf:
+ mvumi_release_mem_resource(mhba);
+ return -1;
+}
+
+static int mvumi_hs_process_page(struct mvumi_hba *mhba,
+ struct mvumi_hs_header *hs_header)
+{
+ struct mvumi_hs_page1 *hs_page1;
+ unsigned char page_checksum;
+
+ page_checksum = mvumi_calculate_checksum(hs_header,
+ hs_header->frame_length);
+ if (page_checksum != hs_header->checksum) {
+ dev_err(&mhba->pdev->dev, "checksum error\n");
+ return -1;
+ }
+
+ switch (hs_header->page_code) {
+ case HS_PAGE_FIRM_CAP:
+ hs_page1 = (struct mvumi_hs_page1 *) hs_header;
+
+ mhba->max_io = hs_page1->max_io_support;
+ mhba->list_num_io = hs_page1->cl_inout_list_depth;
+ mhba->max_transfer_size = hs_page1->max_transfer_size;
+ mhba->max_target_id = hs_page1->max_devices_support;
+ mhba->hba_capability = hs_page1->capability;
+ mhba->ib_max_size_setting = hs_page1->cl_in_max_entry_size;
+ mhba->ib_max_size = (1 << hs_page1->cl_in_max_entry_size) << 2;
+
+ mhba->ob_max_size_setting = hs_page1->cl_out_max_entry_size;
+ mhba->ob_max_size = (1 << hs_page1->cl_out_max_entry_size) << 2;
+
+ dev_dbg(&mhba->pdev->dev, "FW version:%d\n",
+ hs_page1->fw_ver.ver_build);
+
+ break;
+ default:
+ dev_err(&mhba->pdev->dev, "handshake: page code error\n");
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * mvumi_handshake - Move the FW to READY state
+ * @mhba: Adapter soft state
+ *
+ * During the initialization, FW passes can potentially be in any one of
+ * several possible states. If the FW in operational, waiting-for-handshake
+ * states, driver must take steps to bring it to ready state. Otherwise, it
+ * has to wait for the ready state.
+ */
+static int mvumi_handshake(struct mvumi_hba *mhba)
+{
+ unsigned int hs_state, tmp, hs_fun;
+ struct mvumi_hs_header *hs_header;
+ void *regs = mhba->mmio;
+
+ if (mhba->fw_state == FW_STATE_STARTING)
+ hs_state = HS_S_START;
+ else {
+ tmp = ioread32(regs + CPU_ARM_TO_PCIEA_MSG0);
+ hs_state = HS_GET_STATE(tmp);
+ dev_dbg(&mhba->pdev->dev, "handshake state[0x%x].\n", hs_state);
+ if (HS_GET_STATUS(tmp) != HS_STATUS_OK) {
+ mhba->fw_state = FW_STATE_STARTING;
+ return -1;
+ }
+ }
+
+ hs_fun = 0;
+ switch (hs_state) {
+ case HS_S_START:
+ mhba->fw_state = FW_STATE_HANDSHAKING;
+ HS_SET_STATUS(hs_fun, HS_STATUS_OK);
+ HS_SET_STATE(hs_fun, HS_S_RESET);
+ iowrite32(HANDSHAKE_SIGNATURE, regs + CPU_PCIEA_TO_ARM_MSG1);
+ iowrite32(hs_fun, regs + CPU_PCIEA_TO_ARM_MSG0);
+ iowrite32(DRBL_HANDSHAKE, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+ break;
+
+ case HS_S_RESET:
+ iowrite32(lower_32_bits(mhba->handshake_page_phys),
+ regs + CPU_PCIEA_TO_ARM_MSG1);
+ iowrite32(upper_32_bits(mhba->handshake_page_phys),
+ regs + CPU_ARM_TO_PCIEA_MSG1);
+ HS_SET_STATUS(hs_fun, HS_STATUS_OK);
+ HS_SET_STATE(hs_fun, HS_S_PAGE_ADDR);
+ iowrite32(hs_fun, regs + CPU_PCIEA_TO_ARM_MSG0);
+ iowrite32(DRBL_HANDSHAKE, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+
+ break;
+
+ case HS_S_PAGE_ADDR:
+ case HS_S_QUERY_PAGE:
+ case HS_S_SEND_PAGE:
+ hs_header = (struct mvumi_hs_header *) mhba->handshake_page;
+ if (hs_header->page_code == HS_PAGE_FIRM_CAP) {
+ mhba->hba_total_pages =
+ ((struct mvumi_hs_page1 *) hs_header)->total_pages;
+
+ if (mhba->hba_total_pages == 0)
+ mhba->hba_total_pages = HS_PAGE_TOTAL-1;
+ }
+
+ if (hs_state == HS_S_QUERY_PAGE) {
+ if (mvumi_hs_process_page(mhba, hs_header)) {
+ HS_SET_STATE(hs_fun, HS_S_ABORT);
+ return -1;
+ }
+ if (mvumi_init_data(mhba)) {
+ HS_SET_STATE(hs_fun, HS_S_ABORT);
+ return -1;
+ }
+ } else if (hs_state == HS_S_PAGE_ADDR) {
+ hs_header->page_code = 0;
+ mhba->hba_total_pages = HS_PAGE_TOTAL-1;
+ }
+
+ if ((hs_header->page_code + 1) <= mhba->hba_total_pages) {
+ hs_header->page_code++;
+ if (hs_header->page_code != HS_PAGE_FIRM_CAP) {
+ mvumi_hs_build_page(mhba, hs_header);
+ HS_SET_STATE(hs_fun, HS_S_SEND_PAGE);
+ } else
+ HS_SET_STATE(hs_fun, HS_S_QUERY_PAGE);
+ } else
+ HS_SET_STATE(hs_fun, HS_S_END);
+
+ HS_SET_STATUS(hs_fun, HS_STATUS_OK);
+ iowrite32(hs_fun, regs + CPU_PCIEA_TO_ARM_MSG0);
+ iowrite32(DRBL_HANDSHAKE, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+ break;
+
+ case HS_S_END:
+ /* Set communication list ISR */
+ tmp = ioread32(regs + CPU_ENPOINTA_MASK_REG);
+ tmp |= INT_MAP_COMAOUT | INT_MAP_COMAERR;
+ iowrite32(tmp, regs + CPU_ENPOINTA_MASK_REG);
+ iowrite32(mhba->list_num_io, mhba->ib_shadow);
+ /* Set InBound List Avaliable count shadow */
+ iowrite32(lower_32_bits(mhba->ib_shadow_phys),
+ regs + CLA_INB_AVAL_COUNT_BASEL);
+ iowrite32(upper_32_bits(mhba->ib_shadow_phys),
+ regs + CLA_INB_AVAL_COUNT_BASEH);
+
+ /* Set OutBound List Avaliable count shadow */
+ iowrite32((mhba->list_num_io-1) | CL_POINTER_TOGGLE,
+ mhba->ob_shadow);
+ iowrite32(lower_32_bits(mhba->ob_shadow_phys), regs + 0x5B0);
+ iowrite32(upper_32_bits(mhba->ob_shadow_phys), regs + 0x5B4);
+
+ mhba->ib_cur_slot = (mhba->list_num_io - 1) | CL_POINTER_TOGGLE;
+ mhba->ob_cur_slot = (mhba->list_num_io - 1) | CL_POINTER_TOGGLE;
+ mhba->fw_state = FW_STATE_STARTED;
+
+ break;
+ default:
+ dev_err(&mhba->pdev->dev, "unknown handshake state [0x%x].\n",
+ hs_state);
+ return -1;
+ }
+ return 0;
+}
+
+static unsigned char mvumi_handshake_event(struct mvumi_hba *mhba)
+{
+ unsigned int isr_status;
+ unsigned long before;
+
+ before = jiffies;
+ mvumi_handshake(mhba);
+ do {
+ isr_status = mhba->instancet->read_fw_status_reg(mhba->mmio);
+
+ if (mhba->fw_state == FW_STATE_STARTED)
+ return 0;
+ if (time_after(jiffies, before + FW_MAX_DELAY * HZ)) {
+ dev_err(&mhba->pdev->dev,
+ "no handshake response at state 0x%x.\n",
+ mhba->fw_state);
+ dev_err(&mhba->pdev->dev,
+ "isr : global=0x%x,status=0x%x.\n",
+ mhba->global_isr, isr_status);
+ return -1;
+ }
+ rmb();
+ usleep_range(1000, 2000);
+ } while (!(isr_status & DRBL_HANDSHAKE_ISR));
+
+ return 0;
+}
+
+static unsigned char mvumi_check_handshake(struct mvumi_hba *mhba)
+{
+ void *regs = mhba->mmio;
+ unsigned int tmp;
+ unsigned long before;
+
+ before = jiffies;
+ tmp = ioread32(regs + CPU_ARM_TO_PCIEA_MSG1);
+ while ((tmp != HANDSHAKE_READYSTATE) && (tmp != HANDSHAKE_DONESTATE)) {
+ if (tmp != HANDSHAKE_READYSTATE)
+ iowrite32(DRBL_MU_RESET,
+ regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+ if (time_after(jiffies, before + FW_MAX_DELAY * HZ)) {
+ dev_err(&mhba->pdev->dev,
+ "invalid signature [0x%x].\n", tmp);
+ return -1;
+ }
+ usleep_range(1000, 2000);
+ rmb();
+ tmp = ioread32(regs + CPU_ARM_TO_PCIEA_MSG1);
+ }
+
+ mhba->fw_state = FW_STATE_STARTING;
+ dev_dbg(&mhba->pdev->dev, "start firmware handshake...\n");
+ do {
+ if (mvumi_handshake_event(mhba)) {
+ dev_err(&mhba->pdev->dev,
+ "handshake failed at state 0x%x.\n",
+ mhba->fw_state);
+ return -1;
+ }
+ } while (mhba->fw_state != FW_STATE_STARTED);
+
+ dev_dbg(&mhba->pdev->dev, "firmware handshake done\n");
+
+ return 0;
+}
+
+static unsigned char mvumi_start(struct mvumi_hba *mhba)
+{
+ void *regs = mhba->mmio;
+ unsigned int tmp;
+ /* clear Door bell */
+ tmp = ioread32(regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+ iowrite32(tmp, regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+
+ iowrite32(0x3FFFFFFF, regs + CPU_ARM_TO_PCIEA_MASK_REG);
+ tmp = ioread32(regs + CPU_ENPOINTA_MASK_REG) | INT_MAP_DL_CPU2PCIEA;
+ iowrite32(tmp, regs + CPU_ENPOINTA_MASK_REG);
+ if (mvumi_check_handshake(mhba))
+ return -1;
+
+ return 0;
+}
+
+/**
+ * mvumi_complete_cmd - Completes a command
+ * @mhba: Adapter soft state
+ * @cmd: Command to be completed
+ */
+static void mvumi_complete_cmd(struct mvumi_hba *mhba, struct mvumi_cmd *cmd,
+ struct mvumi_rsp_frame *ob_frame)
+{
+ struct scsi_cmnd *scmd = cmd->scmd;
+
+ cmd->scmd->SCp.ptr = NULL;
+ scmd->result = ob_frame->req_status;
+
+ switch (ob_frame->req_status) {
+ case SAM_STAT_GOOD:
+ scmd->result |= DID_OK << 16;
+ break;
+ case SAM_STAT_BUSY:
+ scmd->result |= DID_BUS_BUSY << 16;
+ break;
+ case SAM_STAT_CHECK_CONDITION:
+ scmd->result |= (DID_OK << 16);
+ if (ob_frame->rsp_flag & CL_RSP_FLAG_SENSEDATA) {
+ memcpy(cmd->scmd->sense_buffer, ob_frame->payload,
+ sizeof(struct mvumi_sense_data));
+ scmd->result |= (DRIVER_SENSE << 24);
+ }
+ break;
+ default:
+ scmd->result |= (DRIVER_INVALID << 24) | (DID_ABORT << 16);
+ break;
+ }
+
+ if (scsi_bufflen(scmd)) {
+ if (scsi_sg_count(scmd)) {
+ pci_unmap_sg(mhba->pdev,
+ scsi_sglist(scmd),
+ scsi_sg_count(scmd),
+ (int) scmd->sc_data_direction);
+ } else {
+ pci_unmap_single(mhba->pdev,
+ scmd->SCp.dma_handle,
+ scsi_bufflen(scmd),
+ (int) scmd->sc_data_direction);
+
+ scmd->SCp.dma_handle = 0;
+ }
+ }
+ cmd->scmd->scsi_done(scmd);
+ mvumi_return_cmd(mhba, cmd);
+}
+static void mvumi_complete_internal_cmd(struct mvumi_hba *mhba,
+ struct mvumi_cmd *cmd,
+ struct mvumi_rsp_frame *ob_frame)
+{
+ if (atomic_read(&cmd->sync_cmd)) {
+ cmd->cmd_status = ob_frame->req_status;
+
+ if ((ob_frame->req_status == SAM_STAT_CHECK_CONDITION) &&
+ (ob_frame->rsp_flag & CL_RSP_FLAG_SENSEDATA) &&
+ cmd->data_buf) {
+ memcpy(cmd->data_buf, ob_frame->payload,
+ sizeof(struct mvumi_sense_data));
+ }
+ atomic_dec(&cmd->sync_cmd);
+ wake_up(&mhba->int_cmd_wait_q);
+ }
+}
+
+static void mvumi_show_event(struct mvumi_hba *mhba,
+ struct mvumi_driver_event *ptr)
+{
+ unsigned int i;
+
+ dev_warn(&mhba->pdev->dev,
+ "Event[0x%x] id[0x%x] severity[0x%x] device id[0x%x]\n",
+ ptr->sequence_no, ptr->event_id, ptr->severity, ptr->device_id);
+ if (ptr->param_count) {
+ printk(KERN_WARNING "Event param(len 0x%x): ",
+ ptr->param_count);
+ for (i = 0; i < ptr->param_count; i++)
+ printk(KERN_WARNING "0x%x ", ptr->params[i]);
+
+ printk(KERN_WARNING "\n");
+ }
+
+ if (ptr->sense_data_length) {
+ printk(KERN_WARNING "Event sense data(len 0x%x): ",
+ ptr->sense_data_length);
+ for (i = 0; i < ptr->sense_data_length; i++)
+ printk(KERN_WARNING "0x%x ", ptr->sense_data[i]);
+ printk(KERN_WARNING "\n");
+ }
+}
+
+static void mvumi_notification(struct mvumi_hba *mhba, u8 msg, void *buffer)
+{
+ if (msg == APICDB1_EVENT_GETEVENT) {
+ int i, count;
+ struct mvumi_driver_event *param = NULL;
+ struct mvumi_event_req *er = buffer;
+ count = er->count;
+ if (count > MAX_EVENTS_RETURNED) {
+ dev_err(&mhba->pdev->dev, "event count[0x%x] is bigger"
+ " than max event count[0x%x].\n",
+ count, MAX_EVENTS_RETURNED);
+ return;
+ }
+ for (i = 0; i < count; i++) {
+ param = &er->events[i];
+ mvumi_show_event(mhba, param);
+ }
+ }
+}
+
+static int mvumi_get_event(struct mvumi_hba *mhba, unsigned char msg)
+{
+ struct mvumi_cmd *cmd;
+ struct mvumi_msg_frame *frame;
+
+ cmd = mvumi_create_internal_cmd(mhba, 512);
+ if (!cmd)
+ return -1;
+ cmd->scmd = NULL;
+ cmd->cmd_status = REQ_STATUS_PENDING;
+ atomic_set(&cmd->sync_cmd, 0);
+ frame = cmd->frame;
+ frame->device_id = 0;
+ frame->cmd_flag = CMD_FLAG_DATA_IN;
+ frame->req_function = CL_FUN_SCSI_CMD;
+ frame->cdb_length = MAX_COMMAND_SIZE;
+ frame->data_transfer_length = sizeof(struct mvumi_event_req);
+ memset(frame->cdb, 0, MAX_COMMAND_SIZE);
+ frame->cdb[0] = APICDB0_EVENT;
+ frame->cdb[1] = msg;
+ mvumi_issue_blocked_cmd(mhba, cmd);
+
+ if (cmd->cmd_status != SAM_STAT_GOOD)
+ dev_err(&mhba->pdev->dev, "get event failed, status=0x%x.\n",
+ cmd->cmd_status);
+ else
+ mvumi_notification(mhba, cmd->frame->cdb[1], cmd->data_buf);
+
+ mvumi_delete_internal_cmd(mhba, cmd);
+ return 0;
+}
+
+static void mvumi_scan_events(struct work_struct *work)
+{
+ struct mvumi_events_wq *mu_ev =
+ container_of(work, struct mvumi_events_wq, work_q);
+
+ mvumi_get_event(mu_ev->mhba, mu_ev->event);
+ kfree(mu_ev);
+}
+
+static void mvumi_launch_events(struct mvumi_hba *mhba, u8 msg)
+{
+ struct mvumi_events_wq *mu_ev;
+
+ mu_ev = kzalloc(sizeof(*mu_ev), GFP_ATOMIC);
+ if (mu_ev) {
+ INIT_WORK(&mu_ev->work_q, mvumi_scan_events);
+ mu_ev->mhba = mhba;
+ mu_ev->event = msg;
+ mu_ev->param = NULL;
+ schedule_work(&mu_ev->work_q);
+ }
+}
+
+static void mvumi_handle_clob(struct mvumi_hba *mhba)
+{
+ struct mvumi_rsp_frame *ob_frame;
+ struct mvumi_cmd *cmd;
+ struct mvumi_ob_data *pool;
+
+ while (!list_empty(&mhba->free_ob_list)) {
+ pool = list_first_entry(&mhba->free_ob_list,
+ struct mvumi_ob_data, list);
+ list_del_init(&pool->list);
+ list_add_tail(&pool->list, &mhba->ob_data_list);
+
+ ob_frame = (struct mvumi_rsp_frame *) &pool->data[0];
+ cmd = mhba->tag_cmd[ob_frame->tag];
+
+ atomic_dec(&mhba->fw_outstanding);
+ mhba->tag_cmd[ob_frame->tag] = 0;
+ tag_release_one(mhba, &mhba->tag_pool, ob_frame->tag);
+ if (cmd->scmd)
+ mvumi_complete_cmd(mhba, cmd, ob_frame);
+ else
+ mvumi_complete_internal_cmd(mhba, cmd, ob_frame);
+ }
+ mhba->instancet->fire_cmd(mhba, NULL);
+}
+
+static irqreturn_t mvumi_isr_handler(int irq, void *devp)
+{
+ struct mvumi_hba *mhba = (struct mvumi_hba *) devp;
+ unsigned long flags;
+
+ spin_lock_irqsave(mhba->shost->host_lock, flags);
+ if (unlikely(mhba->instancet->clear_intr(mhba) || !mhba->global_isr)) {
+ spin_unlock_irqrestore(mhba->shost->host_lock, flags);
+ return IRQ_NONE;
+ }
+
+ if (mhba->global_isr & INT_MAP_DL_CPU2PCIEA) {
+ if (mhba->isr_status & DRBL_HANDSHAKE_ISR) {
+ dev_warn(&mhba->pdev->dev, "enter handshake again!\n");
+ mvumi_handshake(mhba);
+ }
+ if (mhba->isr_status & DRBL_EVENT_NOTIFY)
+ mvumi_launch_events(mhba, APICDB1_EVENT_GETEVENT);
+ }
+
+ if (mhba->global_isr & INT_MAP_COMAOUT)
+ mvumi_receive_ob_list_entry(mhba);
+
+ mhba->global_isr = 0;
+ mhba->isr_status = 0;
+ if (mhba->fw_state == FW_STATE_STARTED)
+ mvumi_handle_clob(mhba);
+ spin_unlock_irqrestore(mhba->shost->host_lock, flags);
+ return IRQ_HANDLED;
+}
+
+static enum mvumi_qc_result mvumi_send_command(struct mvumi_hba *mhba,
+ struct mvumi_cmd *cmd)
+{
+ void *ib_entry;
+ struct mvumi_msg_frame *ib_frame;
+ unsigned int frame_len;
+
+ ib_frame = cmd->frame;
+ if (unlikely(mhba->fw_state != FW_STATE_STARTED)) {
+ dev_dbg(&mhba->pdev->dev, "firmware not ready.\n");
+ return MV_QUEUE_COMMAND_RESULT_NO_RESOURCE;
+ }
+ if (tag_is_empty(&mhba->tag_pool)) {
+ dev_dbg(&mhba->pdev->dev, "no free tag.\n");
+ return MV_QUEUE_COMMAND_RESULT_NO_RESOURCE;
+ }
+ if (mvumi_get_ib_list_entry(mhba, &ib_entry))
+ return MV_QUEUE_COMMAND_RESULT_NO_RESOURCE;
+
+ cmd->frame->tag = tag_get_one(mhba, &mhba->tag_pool);
+ cmd->frame->request_id = mhba->io_seq++;
+ cmd->request_id = cmd->frame->request_id;
+ mhba->tag_cmd[cmd->frame->tag] = cmd;
+ frame_len = sizeof(*ib_frame) - 4 +
+ ib_frame->sg_counts * sizeof(struct mvumi_sgl);
+ memcpy(ib_entry, ib_frame, frame_len);
+ return MV_QUEUE_COMMAND_RESULT_SENT;
+}
+
+static void mvumi_fire_cmd(struct mvumi_hba *mhba, struct mvumi_cmd *cmd)
+{
+ unsigned short num_of_cl_sent = 0;
+ enum mvumi_qc_result result;
+
+ if (cmd)
+ list_add_tail(&cmd->queue_pointer, &mhba->waiting_req_list);
+
+ while (!list_empty(&mhba->waiting_req_list)) {
+ cmd = list_first_entry(&mhba->waiting_req_list,
+ struct mvumi_cmd, queue_pointer);
+ list_del_init(&cmd->queue_pointer);
+ result = mvumi_send_command(mhba, cmd);
+ switch (result) {
+ case MV_QUEUE_COMMAND_RESULT_SENT:
+ num_of_cl_sent++;
+ break;
+ case MV_QUEUE_COMMAND_RESULT_NO_RESOURCE:
+ list_add(&cmd->queue_pointer, &mhba->waiting_req_list);
+ if (num_of_cl_sent > 0)
+ mvumi_send_ib_list_entry(mhba);
+
+ return;
+ }
+ }
+ if (num_of_cl_sent > 0)
+ mvumi_send_ib_list_entry(mhba);
+}
+
+/**
+ * mvumi_enable_intr - Enables interrupts
+ * @regs: FW register set
+ */
+static void mvumi_enable_intr(void *regs)
+{
+ unsigned int mask;
+
+ iowrite32(0x3FFFFFFF, regs + CPU_ARM_TO_PCIEA_MASK_REG);
+ mask = ioread32(regs + CPU_ENPOINTA_MASK_REG);
+ mask |= INT_MAP_DL_CPU2PCIEA | INT_MAP_COMAOUT | INT_MAP_COMAERR;
+ iowrite32(mask, regs + CPU_ENPOINTA_MASK_REG);
+}
+
+/**
+ * mvumi_disable_intr -Disables interrupt
+ * @regs: FW register set
+ */
+static void mvumi_disable_intr(void *regs)
+{
+ unsigned int mask;
+
+ iowrite32(0, regs + CPU_ARM_TO_PCIEA_MASK_REG);
+ mask = ioread32(regs + CPU_ENPOINTA_MASK_REG);
+ mask &= ~(INT_MAP_DL_CPU2PCIEA | INT_MAP_COMAOUT | INT_MAP_COMAERR);
+ iowrite32(mask, regs + CPU_ENPOINTA_MASK_REG);
+}
+
+static int mvumi_clear_intr(void *extend)
+{
+ struct mvumi_hba *mhba = (struct mvumi_hba *) extend;
+ unsigned int status, isr_status = 0, tmp = 0;
+ void *regs = mhba->mmio;
+
+ status = ioread32(regs + CPU_MAIN_INT_CAUSE_REG);
+ if (!(status & INT_MAP_MU) || status == 0xFFFFFFFF)
+ return 1;
+ if (unlikely(status & INT_MAP_COMAERR)) {
+ tmp = ioread32(regs + CLA_ISR_CAUSE);
+ if (tmp & (CLIC_IN_ERR_IRQ | CLIC_OUT_ERR_IRQ))
+ iowrite32(tmp & (CLIC_IN_ERR_IRQ | CLIC_OUT_ERR_IRQ),
+ regs + CLA_ISR_CAUSE);
+ status ^= INT_MAP_COMAERR;
+ /* inbound or outbound parity error, command will timeout */
+ }
+ if (status & INT_MAP_COMAOUT) {
+ tmp = ioread32(regs + CLA_ISR_CAUSE);
+ if (tmp & CLIC_OUT_IRQ)
+ iowrite32(tmp & CLIC_OUT_IRQ, regs + CLA_ISR_CAUSE);
+ }
+ if (status & INT_MAP_DL_CPU2PCIEA) {
+ isr_status = ioread32(regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+ if (isr_status)
+ iowrite32(isr_status, regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+ }
+
+ mhba->global_isr = status;
+ mhba->isr_status = isr_status;
+
+ return 0;
+}
+
+/**
+ * mvumi_read_fw_status_reg - returns the current FW status value
+ * @regs: FW register set
+ */
+static unsigned int mvumi_read_fw_status_reg(void *regs)
+{
+ unsigned int status;
+
+ status = ioread32(regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+ if (status)
+ iowrite32(status, regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+ return status;
+}
+
+static struct mvumi_instance_template mvumi_instance_template = {
+ .fire_cmd = mvumi_fire_cmd,
+ .enable_intr = mvumi_enable_intr,
+ .disable_intr = mvumi_disable_intr,
+ .clear_intr = mvumi_clear_intr,
+ .read_fw_status_reg = mvumi_read_fw_status_reg,
+};
+
+static int mvumi_slave_configure(struct scsi_device *sdev)
+{
+ struct mvumi_hba *mhba;
+ unsigned char bitcount = sizeof(unsigned char) * 8;
+
+ mhba = (struct mvumi_hba *) sdev->host->hostdata;
+ if (sdev->id >= mhba->max_target_id)
+ return -EINVAL;
+
+ mhba->target_map[sdev->id / bitcount] |= (1 << (sdev->id % bitcount));
+ return 0;
+}
+
+/**
+ * mvumi_build_frame - Prepares a direct cdb (DCDB) command
+ * @mhba: Adapter soft state
+ * @scmd: SCSI command
+ * @cmd: Command to be prepared in
+ *
+ * This function prepares CDB commands. These are typcially pass-through
+ * commands to the devices.
+ */
+static unsigned char mvumi_build_frame(struct mvumi_hba *mhba,
+ struct scsi_cmnd *scmd, struct mvumi_cmd *cmd)
+{
+ struct mvumi_msg_frame *pframe;
+
+ cmd->scmd = scmd;
+ cmd->cmd_status = REQ_STATUS_PENDING;
+ pframe = cmd->frame;
+ pframe->device_id = ((unsigned short) scmd->device->id) |
+ (((unsigned short) scmd->device->lun) << 8);
+ pframe->cmd_flag = 0;
+
+ switch (scmd->sc_data_direction) {
+ case DMA_NONE:
+ pframe->cmd_flag |= CMD_FLAG_NON_DATA;
+ break;
+ case DMA_FROM_DEVICE:
+ pframe->cmd_flag |= CMD_FLAG_DATA_IN;
+ break;
+ case DMA_TO_DEVICE:
+ pframe->cmd_flag |= CMD_FLAG_DATA_OUT;
+ break;
+ case DMA_BIDIRECTIONAL:
+ default:
+ dev_warn(&mhba->pdev->dev, "unexpected data direction[%d] "
+ "cmd[0x%x]\n", scmd->sc_data_direction, scmd->cmnd[0]);
+ goto error;
+ }
+
+ pframe->cdb_length = scmd->cmd_len;
+ memcpy(pframe->cdb, scmd->cmnd, pframe->cdb_length);
+ pframe->req_function = CL_FUN_SCSI_CMD;
+ if (scsi_bufflen(scmd)) {
+ if (mvumi_make_sgl(mhba, scmd, &pframe->payload[0],
+ &pframe->sg_counts))
+ goto error;
+
+ pframe->data_transfer_length = scsi_bufflen(scmd);
+ } else {
+ pframe->sg_counts = 0;
+ pframe->data_transfer_length = 0;
+ }
+ return 0;
+
+error:
+ scmd->result = (DID_OK << 16) | (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x24,
+ 0);
+ return -1;
+}
+
+/**
+ * mvumi_queue_command - Queue entry point
+ * @scmd: SCSI command to be queued
+ * @done: Callback entry point
+ */
+static int mvumi_queue_command(struct Scsi_Host *shost,
+ struct scsi_cmnd *scmd)
+{
+ struct mvumi_cmd *cmd;
+ struct mvumi_hba *mhba;
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(shost->host_lock, irq_flags);
+ scsi_cmd_get_serial(shost, scmd);
+
+ mhba = (struct mvumi_hba *) shost->hostdata;
+ scmd->result = 0;
+ cmd = mvumi_get_cmd(mhba);
+ if (unlikely(!cmd)) {
+ spin_unlock_irqrestore(shost->host_lock, irq_flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ if (unlikely(mvumi_build_frame(mhba, scmd, cmd)))
+ goto out_return_cmd;
+
+ cmd->scmd = scmd;
+ scmd->SCp.ptr = (char *) cmd;
+ mhba->instancet->fire_cmd(mhba, cmd);
+ spin_unlock_irqrestore(shost->host_lock, irq_flags);
+ return 0;
+
+out_return_cmd:
+ mvumi_return_cmd(mhba, cmd);
+ scmd->scsi_done(scmd);
+ spin_unlock_irqrestore(shost->host_lock, irq_flags);
+ return 0;
+}
+
+static enum blk_eh_timer_return mvumi_timed_out(struct scsi_cmnd *scmd)
+{
+ struct mvumi_cmd *cmd = (struct mvumi_cmd *) scmd->SCp.ptr;
+ struct Scsi_Host *host = scmd->device->host;
+ struct mvumi_hba *mhba = shost_priv(host);
+ unsigned long flags;
+
+ spin_lock_irqsave(mhba->shost->host_lock, flags);
+
+ if (mhba->tag_cmd[cmd->frame->tag]) {
+ mhba->tag_cmd[cmd->frame->tag] = 0;
+ tag_release_one(mhba, &mhba->tag_pool, cmd->frame->tag);
+ }
+ if (!list_empty(&cmd->queue_pointer))
+ list_del_init(&cmd->queue_pointer);
+ else
+ atomic_dec(&mhba->fw_outstanding);
+
+ scmd->result = (DRIVER_INVALID << 24) | (DID_ABORT << 16);
+ scmd->SCp.ptr = NULL;
+ if (scsi_bufflen(scmd)) {
+ if (scsi_sg_count(scmd)) {
+ pci_unmap_sg(mhba->pdev,
+ scsi_sglist(scmd),
+ scsi_sg_count(scmd),
+ (int)scmd->sc_data_direction);
+ } else {
+ pci_unmap_single(mhba->pdev,
+ scmd->SCp.dma_handle,
+ scsi_bufflen(scmd),
+ (int)scmd->sc_data_direction);
+
+ scmd->SCp.dma_handle = 0;
+ }
+ }
+ mvumi_return_cmd(mhba, cmd);
+ spin_unlock_irqrestore(mhba->shost->host_lock, flags);
+
+ return BLK_EH_NOT_HANDLED;
+}
+
+static int
+mvumi_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ int heads, sectors;
+ sector_t cylinders;
+ unsigned long tmp;
+
+ heads = 64;
+ sectors = 32;
+ tmp = heads * sectors;
+ cylinders = capacity;
+ sector_div(cylinders, tmp);
+
+ if (capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ tmp = heads * sectors;
+ cylinders = capacity;
+ sector_div(cylinders, tmp);
+ }
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+
+ return 0;
+}
+
+static struct scsi_host_template mvumi_template = {
+
+ .module = THIS_MODULE,
+ .name = "Marvell Storage Controller",
+ .slave_configure = mvumi_slave_configure,
+ .queuecommand = mvumi_queue_command,
+ .eh_host_reset_handler = mvumi_host_reset,
+ .bios_param = mvumi_bios_param,
+ .this_id = -1,
+};
+
+static struct scsi_transport_template mvumi_transport_template = {
+ .eh_timed_out = mvumi_timed_out,
+};
+
+/**
+ * mvumi_init_fw - Initializes the FW
+ * @mhba: Adapter soft state
+ *
+ * This is the main function for initializing firmware.
+ */
+static int mvumi_init_fw(struct mvumi_hba *mhba)
+{
+ int ret = 0;
+
+ if (pci_request_regions(mhba->pdev, MV_DRIVER_NAME)) {
+ dev_err(&mhba->pdev->dev, "IO memory region busy!\n");
+ return -EBUSY;
+ }
+ ret = mvumi_map_pci_addr(mhba->pdev, mhba->base_addr);
+ if (ret)
+ goto fail_ioremap;
+
+ mhba->mmio = mhba->base_addr[0];
+
+ switch (mhba->pdev->device) {
+ case PCI_DEVICE_ID_MARVELL_MV9143:
+ mhba->instancet = &mvumi_instance_template;
+ mhba->io_seq = 0;
+ mhba->max_sge = MVUMI_MAX_SG_ENTRY;
+ mhba->request_id_enabled = 1;
+ break;
+ default:
+ dev_err(&mhba->pdev->dev, "device 0x%x not supported!\n",
+ mhba->pdev->device);
+ mhba->instancet = NULL;
+ ret = -EINVAL;
+ goto fail_alloc_mem;
+ }
+ dev_dbg(&mhba->pdev->dev, "device id : %04X is found.\n",
+ mhba->pdev->device);
+
+ mhba->handshake_page = kzalloc(HSP_MAX_SIZE, GFP_KERNEL);
+ if (!mhba->handshake_page) {
+ dev_err(&mhba->pdev->dev,
+ "failed to allocate memory for handshake\n");
+ ret = -ENOMEM;
+ goto fail_alloc_mem;
+ }
+ mhba->handshake_page_phys = virt_to_phys(mhba->handshake_page);
+
+ if (mvumi_start(mhba)) {
+ ret = -EINVAL;
+ goto fail_ready_state;
+ }
+ ret = mvumi_alloc_cmds(mhba);
+ if (ret)
+ goto fail_ready_state;
+
+ return 0;
+
+fail_ready_state:
+ mvumi_release_mem_resource(mhba);
+ kfree(mhba->handshake_page);
+fail_alloc_mem:
+ mvumi_unmap_pci_addr(mhba->pdev, mhba->base_addr);
+fail_ioremap:
+ pci_release_regions(mhba->pdev);
+
+ return ret;
+}
+
+/**
+ * mvumi_io_attach - Attaches this driver to SCSI mid-layer
+ * @mhba: Adapter soft state
+ */
+static int mvumi_io_attach(struct mvumi_hba *mhba)
+{
+ struct Scsi_Host *host = mhba->shost;
+ int ret;
+ unsigned int max_sg = (mhba->ib_max_size + 4 -
+ sizeof(struct mvumi_msg_frame)) / sizeof(struct mvumi_sgl);
+
+ host->irq = mhba->pdev->irq;
+ host->unique_id = mhba->unique_id;
+ host->can_queue = (mhba->max_io - 1) ? (mhba->max_io - 1) : 1;
+ host->sg_tablesize = mhba->max_sge > max_sg ? max_sg : mhba->max_sge;
+ host->max_sectors = mhba->max_transfer_size / 512;
+ host->cmd_per_lun = (mhba->max_io - 1) ? (mhba->max_io - 1) : 1;
+ host->max_id = mhba->max_target_id;
+ host->max_cmd_len = MAX_COMMAND_SIZE;
+ host->transportt = &mvumi_transport_template;
+
+ ret = scsi_add_host(host, &mhba->pdev->dev);
+ if (ret) {
+ dev_err(&mhba->pdev->dev, "scsi_add_host failed\n");
+ return ret;
+ }
+ mhba->fw_flag |= MVUMI_FW_ATTACH;
+ scsi_scan_host(host);
+
+ return 0;
+}
+
+/**
+ * mvumi_probe_one - PCI hotplug entry point
+ * @pdev: PCI device structure
+ * @id: PCI ids of supported hotplugged adapter
+ */
+static int __devinit mvumi_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct Scsi_Host *host;
+ struct mvumi_hba *mhba;
+ int ret;
+
+ dev_dbg(&pdev->dev, " %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
+ pdev->vendor, pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ if (IS_DMA64) {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret) {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ goto fail_set_dma_mask;
+ }
+ } else {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ goto fail_set_dma_mask;
+ }
+
+ host = scsi_host_alloc(&mvumi_template, sizeof(*mhba));
+ if (!host) {
+ dev_err(&pdev->dev, "scsi_host_alloc failed\n");
+ ret = -ENOMEM;
+ goto fail_alloc_instance;
+ }
+ mhba = shost_priv(host);
+
+ INIT_LIST_HEAD(&mhba->cmd_pool);
+ INIT_LIST_HEAD(&mhba->ob_data_list);
+ INIT_LIST_HEAD(&mhba->free_ob_list);
+ INIT_LIST_HEAD(&mhba->res_list);
+ INIT_LIST_HEAD(&mhba->waiting_req_list);
+ atomic_set(&mhba->fw_outstanding, 0);
+ init_waitqueue_head(&mhba->int_cmd_wait_q);
+
+ mhba->pdev = pdev;
+ mhba->shost = host;
+ mhba->unique_id = pdev->bus->number << 8 | pdev->devfn;
+
+ ret = mvumi_init_fw(mhba);
+ if (ret)
+ goto fail_init_fw;
+
+ ret = request_irq(mhba->pdev->irq, mvumi_isr_handler, IRQF_SHARED,
+ "mvumi", mhba);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register IRQ\n");
+ goto fail_init_irq;
+ }
+ mhba->instancet->enable_intr(mhba->mmio);
+ pci_set_drvdata(pdev, mhba);
+
+ ret = mvumi_io_attach(mhba);
+ if (ret)
+ goto fail_io_attach;
+ dev_dbg(&pdev->dev, "probe mvumi driver successfully.\n");
+
+ return 0;
+
+fail_io_attach:
+ pci_set_drvdata(pdev, NULL);
+ mhba->instancet->disable_intr(mhba->mmio);
+ free_irq(mhba->pdev->irq, mhba);
+fail_init_irq:
+ mvumi_release_fw(mhba);
+fail_init_fw:
+ scsi_host_put(host);
+
+fail_alloc_instance:
+fail_set_dma_mask:
+ pci_disable_device(pdev);
+
+ return ret;
+}
+
+static void mvumi_detach_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host;
+ struct mvumi_hba *mhba;
+
+ mhba = pci_get_drvdata(pdev);
+ host = mhba->shost;
+ scsi_remove_host(mhba->shost);
+ mvumi_flush_cache(mhba);
+
+ mhba->instancet->disable_intr(mhba->mmio);
+ free_irq(mhba->pdev->irq, mhba);
+ mvumi_release_fw(mhba);
+ scsi_host_put(host);
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+ dev_dbg(&pdev->dev, "driver is removed!\n");
+}
+
+/**
+ * mvumi_shutdown - Shutdown entry point
+ * @device: Generic device structure
+ */
+static void mvumi_shutdown(struct pci_dev *pdev)
+{
+ struct mvumi_hba *mhba = pci_get_drvdata(pdev);
+
+ mvumi_flush_cache(mhba);
+}
+
+static int mvumi_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct mvumi_hba *mhba = NULL;
+
+ mhba = pci_get_drvdata(pdev);
+ mvumi_flush_cache(mhba);
+
+ pci_set_drvdata(pdev, mhba);
+ mhba->instancet->disable_intr(mhba->mmio);
+ free_irq(mhba->pdev->irq, mhba);
+ mvumi_unmap_pci_addr(pdev, mhba->base_addr);
+ pci_release_regions(pdev);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int mvumi_resume(struct pci_dev *pdev)
+{
+ int ret;
+ struct mvumi_hba *mhba = NULL;
+
+ mhba = pci_get_drvdata(pdev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "enable device failed\n");
+ return ret;
+ }
+ pci_set_master(pdev);
+ if (IS_DMA64) {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret) {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ goto fail;
+ }
+ } else {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ goto fail;
+ }
+ ret = pci_request_regions(mhba->pdev, MV_DRIVER_NAME);
+ if (ret)
+ goto fail;
+ ret = mvumi_map_pci_addr(mhba->pdev, mhba->base_addr);
+ if (ret)
+ goto release_regions;
+
+ mhba->mmio = mhba->base_addr[0];
+ mvumi_reset(mhba->mmio);
+
+ if (mvumi_start(mhba)) {
+ ret = -EINVAL;
+ goto unmap_pci_addr;
+ }
+
+ ret = request_irq(mhba->pdev->irq, mvumi_isr_handler, IRQF_SHARED,
+ "mvumi", mhba);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register IRQ\n");
+ goto unmap_pci_addr;
+ }
+ mhba->instancet->enable_intr(mhba->mmio);
+
+ return 0;
+
+unmap_pci_addr:
+ mvumi_unmap_pci_addr(pdev, mhba->base_addr);
+release_regions:
+ pci_release_regions(pdev);
+fail:
+ pci_disable_device(pdev);
+
+ return ret;
+}
+
+static struct pci_driver mvumi_pci_driver = {
+
+ .name = MV_DRIVER_NAME,
+ .id_table = mvumi_pci_table,
+ .probe = mvumi_probe_one,
+ .remove = __devexit_p(mvumi_detach_one),
+ .shutdown = mvumi_shutdown,
+#ifdef CONFIG_PM
+ .suspend = mvumi_suspend,
+ .resume = mvumi_resume,
+#endif
+};
+
+/**
+ * mvumi_init - Driver load entry point
+ */
+static int __init mvumi_init(void)
+{
+ return pci_register_driver(&mvumi_pci_driver);
+}
+
+/**
+ * mvumi_exit - Driver unload entry point
+ */
+static void __exit mvumi_exit(void)
+{
+
+ pci_unregister_driver(&mvumi_pci_driver);
+}
+
+module_init(mvumi_init);
+module_exit(mvumi_exit);
diff --git a/drivers/scsi/mvumi.h b/drivers/scsi/mvumi.h
new file mode 100644
index 0000000..10b92375
--- /dev/null
+++ b/drivers/scsi/mvumi.h
@@ -0,0 +1,505 @@
+/*
+ * Marvell UMI head file
+ *
+ * Copyright 2011 Marvell. <jyli@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#ifndef MVUMI_H
+#define MVUMI_H
+
+#define MAX_BASE_ADDRESS 6
+
+#define VER_MAJOR 1
+#define VER_MINOR 1
+#define VER_OEM 0
+#define VER_BUILD 1500
+
+#define MV_DRIVER_NAME "mvumi"
+#define PCI_VENDOR_ID_MARVELL_2 0x1b4b
+#define PCI_DEVICE_ID_MARVELL_MV9143 0x9143
+
+#define MVUMI_INTERNAL_CMD_WAIT_TIME 45
+
+#define IS_DMA64 (sizeof(dma_addr_t) == 8)
+
+enum mvumi_qc_result {
+ MV_QUEUE_COMMAND_RESULT_SENT = 0,
+ MV_QUEUE_COMMAND_RESULT_NO_RESOURCE,
+};
+
+enum {
+ /*******************************************/
+
+ /* ARM Mbus Registers Map */
+
+ /*******************************************/
+ CPU_MAIN_INT_CAUSE_REG = 0x20200,
+ CPU_MAIN_IRQ_MASK_REG = 0x20204,
+ CPU_MAIN_FIQ_MASK_REG = 0x20208,
+ CPU_ENPOINTA_MASK_REG = 0x2020C,
+ CPU_ENPOINTB_MASK_REG = 0x20210,
+
+ INT_MAP_COMAERR = 1 << 6,
+ INT_MAP_COMAIN = 1 << 7,
+ INT_MAP_COMAOUT = 1 << 8,
+ INT_MAP_COMBERR = 1 << 9,
+ INT_MAP_COMBIN = 1 << 10,
+ INT_MAP_COMBOUT = 1 << 11,
+
+ INT_MAP_COMAINT = (INT_MAP_COMAOUT | INT_MAP_COMAERR),
+ INT_MAP_COMBINT = (INT_MAP_COMBOUT | INT_MAP_COMBIN | INT_MAP_COMBERR),
+
+ INT_MAP_DL_PCIEA2CPU = 1 << 0,
+ INT_MAP_DL_CPU2PCIEA = 1 << 1,
+
+ /***************************************/
+
+ /* ARM Doorbell Registers Map */
+
+ /***************************************/
+ CPU_PCIEA_TO_ARM_DRBL_REG = 0x20400,
+ CPU_PCIEA_TO_ARM_MASK_REG = 0x20404,
+ CPU_ARM_TO_PCIEA_DRBL_REG = 0x20408,
+ CPU_ARM_TO_PCIEA_MASK_REG = 0x2040C,
+
+ DRBL_HANDSHAKE = 1 << 0,
+ DRBL_SOFT_RESET = 1 << 1,
+ DRBL_BUS_CHANGE = 1 << 2,
+ DRBL_EVENT_NOTIFY = 1 << 3,
+ DRBL_MU_RESET = 1 << 4,
+ DRBL_HANDSHAKE_ISR = DRBL_HANDSHAKE,
+
+ CPU_PCIEA_TO_ARM_MSG0 = 0x20430,
+ CPU_PCIEA_TO_ARM_MSG1 = 0x20434,
+ CPU_ARM_TO_PCIEA_MSG0 = 0x20438,
+ CPU_ARM_TO_PCIEA_MSG1 = 0x2043C,
+
+ /*******************************************/
+
+ /* ARM Communication List Registers Map */
+
+ /*******************************************/
+ CLA_INB_LIST_BASEL = 0x500,
+ CLA_INB_LIST_BASEH = 0x504,
+ CLA_INB_AVAL_COUNT_BASEL = 0x508,
+ CLA_INB_AVAL_COUNT_BASEH = 0x50C,
+ CLA_INB_DESTI_LIST_BASEL = 0x510,
+ CLA_INB_DESTI_LIST_BASEH = 0x514,
+ CLA_INB_WRITE_POINTER = 0x518,
+ CLA_INB_READ_POINTER = 0x51C,
+
+ CLA_OUTB_LIST_BASEL = 0x530,
+ CLA_OUTB_LIST_BASEH = 0x534,
+ CLA_OUTB_SOURCE_LIST_BASEL = 0x538,
+ CLA_OUTB_SOURCE_LIST_BASEH = 0x53C,
+ CLA_OUTB_COPY_POINTER = 0x544,
+ CLA_OUTB_READ_POINTER = 0x548,
+
+ CLA_ISR_CAUSE = 0x560,
+ CLA_ISR_MASK = 0x564,
+
+ INT_MAP_MU = (INT_MAP_DL_CPU2PCIEA | INT_MAP_COMAINT),
+
+ CL_POINTER_TOGGLE = 1 << 12,
+
+ CLIC_IN_IRQ = 1 << 0,
+ CLIC_OUT_IRQ = 1 << 1,
+ CLIC_IN_ERR_IRQ = 1 << 8,
+ CLIC_OUT_ERR_IRQ = 1 << 12,
+
+ CL_SLOT_NUM_MASK = 0xFFF,
+
+ /*
+ * Command flag is the flag for the CDB command itself
+ */
+ /* 1-non data; 0-data command */
+ CMD_FLAG_NON_DATA = 1 << 0,
+ CMD_FLAG_DMA = 1 << 1,
+ CMD_FLAG_PIO = 1 << 2,
+ /* 1-host read data */
+ CMD_FLAG_DATA_IN = 1 << 3,
+ /* 1-host write data */
+ CMD_FLAG_DATA_OUT = 1 << 4,
+
+ SCSI_CMD_MARVELL_SPECIFIC = 0xE1,
+ CDB_CORE_SHUTDOWN = 0xB,
+};
+
+#define APICDB0_EVENT 0xF4
+#define APICDB1_EVENT_GETEVENT 0
+#define MAX_EVENTS_RETURNED 6
+
+struct mvumi_driver_event {
+ u32 time_stamp;
+ u32 sequence_no;
+ u32 event_id;
+ u8 severity;
+ u8 param_count;
+ u16 device_id;
+ u32 params[4];
+ u8 sense_data_length;
+ u8 Reserved1;
+ u8 sense_data[30];
+};
+
+struct mvumi_event_req {
+ unsigned char count;
+ unsigned char reserved[3];
+ struct mvumi_driver_event events[MAX_EVENTS_RETURNED];
+};
+
+struct mvumi_events_wq {
+ struct work_struct work_q;
+ struct mvumi_hba *mhba;
+ unsigned int event;
+ void *param;
+};
+
+#define MVUMI_MAX_SG_ENTRY 32
+#define SGD_EOT (1L << 27)
+
+struct mvumi_sgl {
+ u32 baseaddr_l;
+ u32 baseaddr_h;
+ u32 flags;
+ u32 size;
+};
+
+struct mvumi_res {
+ struct list_head entry;
+ dma_addr_t bus_addr;
+ void *virt_addr;
+ unsigned int size;
+ unsigned short type; /* enum Resource_Type */
+};
+
+/* Resource type */
+enum resource_type {
+ RESOURCE_CACHED_MEMORY = 0,
+ RESOURCE_UNCACHED_MEMORY
+};
+
+struct mvumi_sense_data {
+ u8 error_eode:7;
+ u8 valid:1;
+ u8 segment_number;
+ u8 sense_key:4;
+ u8 reserved:1;
+ u8 incorrect_length:1;
+ u8 end_of_media:1;
+ u8 file_mark:1;
+ u8 information[4];
+ u8 additional_sense_length;
+ u8 command_specific_information[4];
+ u8 additional_sense_code;
+ u8 additional_sense_code_qualifier;
+ u8 field_replaceable_unit_code;
+ u8 sense_key_specific[3];
+};
+
+/* Request initiator must set the status to REQ_STATUS_PENDING. */
+#define REQ_STATUS_PENDING 0x80
+
+struct mvumi_cmd {
+ struct list_head queue_pointer;
+ struct mvumi_msg_frame *frame;
+ struct scsi_cmnd *scmd;
+ atomic_t sync_cmd;
+ void *data_buf;
+ unsigned short request_id;
+ unsigned char cmd_status;
+};
+
+/*
+ * the function type of the in bound frame
+ */
+#define CL_FUN_SCSI_CMD 0x1
+
+struct mvumi_msg_frame {
+ u16 device_id;
+ u16 tag;
+ u8 cmd_flag;
+ u8 req_function;
+ u8 cdb_length;
+ u8 sg_counts;
+ u32 data_transfer_length;
+ u16 request_id;
+ u16 reserved1;
+ u8 cdb[MAX_COMMAND_SIZE];
+ u32 payload[1];
+};
+
+/*
+ * the respond flag for data_payload of the out bound frame
+ */
+#define CL_RSP_FLAG_NODATA 0x0
+#define CL_RSP_FLAG_SENSEDATA 0x1
+
+struct mvumi_rsp_frame {
+ u16 device_id;
+ u16 tag;
+ u8 req_status;
+ u8 rsp_flag; /* Indicates the type of Data_Payload.*/
+ u16 request_id;
+ u32 payload[1];
+};
+
+struct mvumi_ob_data {
+ struct list_head list;
+ unsigned char data[0];
+};
+
+struct version_info {
+ u32 ver_major;
+ u32 ver_minor;
+ u32 ver_oem;
+ u32 ver_build;
+};
+
+#define FW_MAX_DELAY 30
+#define MVUMI_FW_BUSY (1U << 0)
+#define MVUMI_FW_ATTACH (1U << 1)
+#define MVUMI_FW_ALLOC (1U << 2)
+
+/*
+ * State is the state of the MU
+ */
+#define FW_STATE_IDLE 0
+#define FW_STATE_STARTING 1
+#define FW_STATE_HANDSHAKING 2
+#define FW_STATE_STARTED 3
+#define FW_STATE_ABORT 4
+
+#define HANDSHAKE_SIGNATURE 0x5A5A5A5AL
+#define HANDSHAKE_READYSTATE 0x55AA5AA5L
+#define HANDSHAKE_DONESTATE 0x55AAA55AL
+
+/* HandShake Status definition */
+#define HS_STATUS_OK 1
+#define HS_STATUS_ERR 2
+#define HS_STATUS_INVALID 3
+
+/* HandShake State/Cmd definition */
+#define HS_S_START 1
+#define HS_S_RESET 2
+#define HS_S_PAGE_ADDR 3
+#define HS_S_QUERY_PAGE 4
+#define HS_S_SEND_PAGE 5
+#define HS_S_END 6
+#define HS_S_ABORT 7
+#define HS_PAGE_VERIFY_SIZE 128
+
+#define HS_GET_STATE(a) (a & 0xFFFF)
+#define HS_GET_STATUS(a) ((a & 0xFFFF0000) >> 16)
+#define HS_SET_STATE(a, b) (a |= (b & 0xFFFF))
+#define HS_SET_STATUS(a, b) (a |= ((b & 0xFFFF) << 16))
+
+/* handshake frame */
+struct mvumi_hs_frame {
+ u16 size;
+ /* host information */
+ u8 host_type;
+ u8 reserved_1[1];
+ struct version_info host_ver; /* bios or driver version */
+
+ /* controller information */
+ u32 system_io_bus;
+ u32 slot_number;
+ u32 intr_level;
+ u32 intr_vector;
+
+ /* communication list configuration */
+ u32 ib_baseaddr_l;
+ u32 ib_baseaddr_h;
+ u32 ob_baseaddr_l;
+ u32 ob_baseaddr_h;
+
+ u8 ib_entry_size;
+ u8 ob_entry_size;
+ u8 ob_depth;
+ u8 ib_depth;
+
+ /* system time */
+ u64 seconds_since1970;
+};
+
+struct mvumi_hs_header {
+ u8 page_code;
+ u8 checksum;
+ u16 frame_length;
+ u32 frame_content[1];
+};
+
+/*
+ * the page code type of the handshake header
+ */
+#define HS_PAGE_FIRM_CAP 0x1
+#define HS_PAGE_HOST_INFO 0x2
+#define HS_PAGE_FIRM_CTL 0x3
+#define HS_PAGE_CL_INFO 0x4
+#define HS_PAGE_TOTAL 0x5
+
+#define HSP_SIZE(i) sizeof(struct mvumi_hs_page##i)
+
+#define HSP_MAX_SIZE ({ \
+ int size, m1, m2; \
+ m1 = max(HSP_SIZE(1), HSP_SIZE(3)); \
+ m2 = max(HSP_SIZE(2), HSP_SIZE(4)); \
+ size = max(m1, m2); \
+ size; \
+})
+
+/* The format of the page code for Firmware capability */
+struct mvumi_hs_page1 {
+ u8 pagecode;
+ u8 checksum;
+ u16 frame_length;
+
+ u16 number_of_ports;
+ u16 max_devices_support;
+ u16 max_io_support;
+ u16 umi_ver;
+ u32 max_transfer_size;
+ struct version_info fw_ver;
+ u8 cl_in_max_entry_size;
+ u8 cl_out_max_entry_size;
+ u8 cl_inout_list_depth;
+ u8 total_pages;
+ u16 capability;
+ u16 reserved1;
+};
+
+/* The format of the page code for Host information */
+struct mvumi_hs_page2 {
+ u8 pagecode;
+ u8 checksum;
+ u16 frame_length;
+
+ u8 host_type;
+ u8 reserved[3];
+ struct version_info host_ver;
+ u32 system_io_bus;
+ u32 slot_number;
+ u32 intr_level;
+ u32 intr_vector;
+ u64 seconds_since1970;
+};
+
+/* The format of the page code for firmware control */
+struct mvumi_hs_page3 {
+ u8 pagecode;
+ u8 checksum;
+ u16 frame_length;
+ u16 control;
+ u8 reserved[2];
+ u32 host_bufferaddr_l;
+ u32 host_bufferaddr_h;
+ u32 host_eventaddr_l;
+ u32 host_eventaddr_h;
+};
+
+struct mvumi_hs_page4 {
+ u8 pagecode;
+ u8 checksum;
+ u16 frame_length;
+ u32 ib_baseaddr_l;
+ u32 ib_baseaddr_h;
+ u32 ob_baseaddr_l;
+ u32 ob_baseaddr_h;
+ u8 ib_entry_size;
+ u8 ob_entry_size;
+ u8 ob_depth;
+ u8 ib_depth;
+};
+
+struct mvumi_tag {
+ unsigned short *stack;
+ unsigned short top;
+ unsigned short size;
+};
+
+struct mvumi_hba {
+ void *base_addr[MAX_BASE_ADDRESS];
+ void *mmio;
+ struct list_head cmd_pool;
+ struct Scsi_Host *shost;
+ wait_queue_head_t int_cmd_wait_q;
+ struct pci_dev *pdev;
+ unsigned int unique_id;
+ atomic_t fw_outstanding;
+ struct mvumi_instance_template *instancet;
+
+ void *ib_list;
+ dma_addr_t ib_list_phys;
+
+ void *ob_list;
+ dma_addr_t ob_list_phys;
+
+ void *ib_shadow;
+ dma_addr_t ib_shadow_phys;
+
+ void *ob_shadow;
+ dma_addr_t ob_shadow_phys;
+
+ void *handshake_page;
+ dma_addr_t handshake_page_phys;
+
+ unsigned int global_isr;
+ unsigned int isr_status;
+
+ unsigned short max_sge;
+ unsigned short max_target_id;
+ unsigned char *target_map;
+ unsigned int max_io;
+ unsigned int list_num_io;
+ unsigned int ib_max_size;
+ unsigned int ob_max_size;
+ unsigned int ib_max_size_setting;
+ unsigned int ob_max_size_setting;
+ unsigned int max_transfer_size;
+ unsigned char hba_total_pages;
+ unsigned char fw_flag;
+ unsigned char request_id_enabled;
+ unsigned short hba_capability;
+ unsigned short io_seq;
+
+ unsigned int ib_cur_slot;
+ unsigned int ob_cur_slot;
+ unsigned int fw_state;
+
+ struct list_head ob_data_list;
+ struct list_head free_ob_list;
+ struct list_head res_list;
+ struct list_head waiting_req_list;
+
+ struct mvumi_tag tag_pool;
+ struct mvumi_cmd **tag_cmd;
+};
+
+struct mvumi_instance_template {
+ void (*fire_cmd)(struct mvumi_hba *, struct mvumi_cmd *);
+ void (*enable_intr)(void *) ;
+ void (*disable_intr)(void *);
+ int (*clear_intr)(void *);
+ unsigned int (*read_fw_status_reg)(void *);
+};
+
+extern struct timezone sys_tz;
+#endif
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 8b7db1e..b7b92f7 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -567,11 +567,11 @@
value = pm8001_cr32(pm8001_ha, 0, 0x44);
offset = value & 0x03FFFFFF;
PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 Offset: %x \n", offset));
+ pm8001_printk("Scratchpad 0 Offset: %x\n", offset));
pcilogic = (value & 0xFC000000) >> 26;
pcibar = get_pci_bar_index(pcilogic);
PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 PCI BAR: %d \n", pcibar));
+ pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
pm8001_ha->main_cfg_tbl_addr = base_addr =
pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
pm8001_ha->general_stat_tbl_addr =
@@ -1245,7 +1245,7 @@
if (mpi_msg_free_get(circularQ, 64, &pMessage) < 0) {
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("No free mpi buffer \n"));
+ pm8001_printk("No free mpi buffer\n"));
return -1;
}
BUG_ON(!payload);
@@ -1262,7 +1262,7 @@
pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
circularQ->pi_offset, circularQ->producer_idx);
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("after PI= %d CI= %d \n", circularQ->producer_idx,
+ pm8001_printk("after PI= %d CI= %d\n", circularQ->producer_idx,
circularQ->consumer_index));
return 0;
}
@@ -1474,7 +1474,7 @@
switch (status) {
case IO_SUCCESS:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
- ",param = %d \n", param));
+ ",param = %d\n", param));
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
@@ -1490,14 +1490,14 @@
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag \n"));
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
break;
case IO_UNDERFLOW:
/* SSP Completion with error */
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
- ",param = %d \n", param));
+ ",param = %d\n", param));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
@@ -1649,6 +1649,7 @@
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
default:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("Unknown status 0x%x\n", status));
@@ -1937,14 +1938,14 @@
ts->buf_valid_size = sizeof(*resp);
} else
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("response to large \n"));
+ pm8001_printk("response to large\n"));
}
if (pm8001_dev)
pm8001_dev->running_req--;
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag \n"));
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
@@ -2728,11 +2729,11 @@
u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
if (status != 0) {
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("%x phy execute %x phy op failed! \n",
+ pm8001_printk("%x phy execute %x phy op failed!\n",
phy_id, phy_op));
} else
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("%x phy execute %x phy op success! \n",
+ pm8001_printk("%x phy execute %x phy op success!\n",
phy_id, phy_op));
return 0;
}
@@ -3018,7 +3019,7 @@
break;
case PORT_INVALID:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" PortInvalid portID %d \n", port_id));
+ pm8001_printk(" PortInvalid portID %d\n", port_id));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
port->port_attached = 0;
@@ -3027,7 +3028,7 @@
break;
case PORT_IN_RESET:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Port In Reset portID %d \n", port_id));
+ pm8001_printk(" Port In Reset portID %d\n", port_id));
break;
case PORT_NOT_ESTABLISHED:
PM8001_MSG_DBG(pm8001_ha,
@@ -3220,7 +3221,7 @@
pm8001_printk(" status = 0x%x\n", status));
for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("inb_IOMB_payload[0x%x] 0x%x, \n", i,
+ pm8001_printk("inb_IOMB_payload[0x%x] 0x%x,\n", i,
pPayload->inb_IOMB_payload[i]));
return 0;
}
@@ -3312,12 +3313,12 @@
break;
case HW_EVENT_SAS_PHY_UP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_START_STATUS \n"));
+ pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
hw_event_sas_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_SATA_PHY_UP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_PHY_UP \n"));
+ pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
hw_event_sata_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_PHY_STOP_STATUS:
@@ -3329,12 +3330,12 @@
break;
case HW_EVENT_SATA_SPINUP_HOLD:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD \n"));
+ pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
break;
case HW_EVENT_PHY_DOWN:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_DOWN \n"));
+ pm8001_printk("HW_EVENT_PHY_DOWN\n"));
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
phy->phy_attached = 0;
phy->phy_state = 0;
@@ -3446,7 +3447,7 @@
break;
case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED \n"));
+ pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
port_id, phy_id, 0, 0);
@@ -3456,25 +3457,25 @@
break;
case HW_EVENT_PORT_RESET_TIMER_TMO:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO \n"));
+ pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO \n"));
+ pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RECOVER:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVER \n"));
+ pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
break;
case HW_EVENT_PORT_RESET_COMPLETE:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE \n"));
+ pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
break;
case EVENT_BROADCAST_ASYNCH_EVENT:
PM8001_MSG_DBG(pm8001_ha,
@@ -3502,21 +3503,21 @@
switch (opc) {
case OPC_OUB_ECHO:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO \n"));
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
break;
case OPC_OUB_HW_EVENT:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_HW_EVENT \n"));
+ pm8001_printk("OPC_OUB_HW_EVENT\n"));
mpi_hw_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_COMP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_COMP \n"));
+ pm8001_printk("OPC_OUB_SSP_COMP\n"));
mpi_ssp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SMP_COMP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SMP_COMP \n"));
+ pm8001_printk("OPC_OUB_SMP_COMP\n"));
mpi_smp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_LOCAL_PHY_CNTRL:
@@ -3526,26 +3527,26 @@
break;
case OPC_OUB_DEV_REGIST:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEV_REGIST \n"));
+ pm8001_printk("OPC_OUB_DEV_REGIST\n"));
mpi_reg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEREG_DEV:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("unresgister the deviece \n"));
+ pm8001_printk("unresgister the deviece\n"));
mpi_dereg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_DEV_HANDLE:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_DEV_HANDLE \n"));
+ pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
break;
case OPC_OUB_SATA_COMP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_COMP \n"));
+ pm8001_printk("OPC_OUB_SATA_COMP\n"));
mpi_sata_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SATA_EVENT:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_EVENT \n"));
+ pm8001_printk("OPC_OUB_SATA_EVENT\n"));
mpi_sata_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_EVENT:
@@ -3858,19 +3859,19 @@
circularQ = &pm8001_ha->inbnd_q_tbl[0];
if (task->data_dir == PCI_DMA_NONE) {
ATAP = 0x04; /* no data*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
} else if (likely(!task->ata_task.device_control_reg_update)) {
if (task->ata_task.dma_xfer) {
ATAP = 0x06; /* DMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
} else {
ATAP = 0x05; /* PIO*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
}
if (task->ata_task.use_ncq &&
dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
ATAP = 0x07; /* FPDMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
}
}
if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag))
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 172cefb..c21a216 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -61,7 +61,7 @@
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
- .slave_configure = pm8001_slave_configure,
+ .slave_configure = sas_slave_configure,
.slave_destroy = sas_slave_destroy,
.scan_finished = pm8001_scan_finished,
.scan_start = pm8001_scan_start,
@@ -76,7 +76,7 @@
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
- .slave_alloc = pm8001_slave_alloc,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = pm8001_host_attrs,
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 6ae059e..fb3dc99 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -210,26 +210,12 @@
PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
break;
default:
- rc = -EOPNOTSUPP;
+ rc = -ENOSYS;
}
msleep(300);
return rc;
}
-int pm8001_slave_alloc(struct scsi_device *scsi_dev)
-{
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
- if (dev_is_sata(dev)) {
- /* We don't need to rescan targets
- * if REPORT_LUNS request is failed
- */
- if (scsi_dev->lun > 0)
- return -ENXIO;
- scsi_dev->tagged_supported = 1;
- }
- return sas_slave_alloc(scsi_dev);
-}
-
/**
* pm8001_scan_start - we should enable all HBA phys by sending the phy_start
* command to HBA.
@@ -314,22 +300,7 @@
{
return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
}
-int pm8001_slave_configure(struct scsi_device *sdev)
-{
- struct domain_device *dev = sdev_to_domain_dev(sdev);
- int ret = sas_slave_configure(sdev);
- if (ret)
- return ret;
- if (dev_is_sata(dev)) {
- #ifdef PM8001_DISABLE_NCQ
- struct ata_port *ap = dev->sata_dev.ap;
- struct ata_device *adev = ap->link.device;
- adev->flags |= ATA_DFLAG_NCQ_OFF;
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
- #endif
- }
- return 0;
-}
+
/* Find the local port id that's attached to this device */
static int sas_find_local_port_id(struct domain_device *dev)
{
@@ -385,21 +356,8 @@
do {
dev = t->dev;
pm8001_dev = dev->lldd_dev;
- if (DEV_IS_GONE(pm8001_dev)) {
- if (pm8001_dev) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %d not ready.\n",
- pm8001_dev->device_id));
- } else {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %016llx not "
- "ready.\n", SAS_ADDR(dev->sas_addr)));
- }
- rc = SAS_PHY_DOWN;
- goto out_done;
- }
port = &pm8001_ha->port[sas_find_local_port_id(dev)];
- if (!port->port_attached) {
+ if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
if (sas_protocol_ata(t->task_proto)) {
struct task_status_struct *ts = &t->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
@@ -651,7 +609,7 @@
flag = 1; /* directly sata*/
}
} /*register this device to HBA*/
- PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device \n"));
+ PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
wait_for_completion(&completion);
@@ -669,30 +627,6 @@
return pm8001_dev_found_notify(dev);
}
-/**
- * pm8001_alloc_task - allocate a task structure for TMF
- */
-static struct sas_task *pm8001_alloc_task(void)
-{
- struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
- if (task) {
- INIT_LIST_HEAD(&task->list);
- spin_lock_init(&task->task_state_lock);
- task->task_state_flags = SAS_TASK_STATE_PENDING;
- init_timer(&task->timer);
- init_completion(&task->completion);
- }
- return task;
-}
-
-static void pm8001_free_task(struct sas_task *task)
-{
- if (task) {
- BUG_ON(!list_empty(&task->list));
- kfree(task);
- }
-}
-
static void pm8001_task_done(struct sas_task *task)
{
if (!del_timer(&task->timer))
@@ -728,7 +662,7 @@
struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
for (retry = 0; retry < 3; retry++) {
- task = pm8001_alloc_task();
+ task = sas_alloc_task(GFP_KERNEL);
if (!task)
return -ENOMEM;
@@ -789,14 +723,13 @@
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat));
- pm8001_free_task(task);
+ sas_free_task(task);
task = NULL;
}
}
ex_err:
BUG_ON(retry == 3 && task != NULL);
- if (task != NULL)
- pm8001_free_task(task);
+ sas_free_task(task);
return res;
}
@@ -811,7 +744,7 @@
struct sas_task *task = NULL;
for (retry = 0; retry < 3; retry++) {
- task = pm8001_alloc_task();
+ task = sas_alloc_task(GFP_KERNEL);
if (!task)
return -ENOMEM;
@@ -864,14 +797,13 @@
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat));
- pm8001_free_task(task);
+ sas_free_task(task);
task = NULL;
}
}
ex_err:
BUG_ON(retry == 3 && task != NULL);
- if (task != NULL)
- pm8001_free_task(task);
+ sas_free_task(task);
return res;
}
@@ -1026,13 +958,14 @@
/* The task is still in Lun, release it then */
case TMF_RESP_FUNC_SUCC:
PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("The task is still in Lun \n"));
+ pm8001_printk("The task is still in Lun\n"));
+ break;
/* The task is not in Lun or failed, reset the phy */
case TMF_RESP_FUNC_FAILED:
case TMF_RESP_FUNC_COMPLETE:
PM8001_EH_DBG(pm8001_ha,
pm8001_printk("The task is not in Lun or failed,"
- " reset the phy \n"));
+ " reset the phy\n"));
break;
}
}
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index b97c8ab..93959fe 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -471,8 +471,6 @@
struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx);
int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
void *funcdata);
-int pm8001_slave_alloc(struct scsi_device *scsi_dev);
-int pm8001_slave_configure(struct scsi_device *sdev);
void pm8001_scan_start(struct Scsi_Host *shost);
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
int pm8001_queue_command(struct sas_task *task, const int num,
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index a31e05f..ac326c4 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -23,11 +23,23 @@
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
+ int rval = 0;
if (ha->fw_dump_reading == 0)
return 0;
- return memory_read_from_buffer(buf, count, &off, ha->fw_dump,
+ if (IS_QLA82XX(ha)) {
+ if (off < ha->md_template_size) {
+ rval = memory_read_from_buffer(buf, count,
+ &off, ha->md_tmplt_hdr, ha->md_template_size);
+ return rval;
+ }
+ off -= ha->md_template_size;
+ rval = memory_read_from_buffer(buf, count,
+ &off, ha->md_dump, ha->md_dump_size);
+ return rval;
+ } else
+ return memory_read_from_buffer(buf, count, &off, ha->fw_dump,
ha->fw_dump_len);
}
@@ -41,12 +53,6 @@
struct qla_hw_data *ha = vha->hw;
int reading;
- if (IS_QLA82XX(ha)) {
- ql_dbg(ql_dbg_user, vha, 0x705b,
- "Firmware dump not supported for ISP82xx\n");
- return count;
- }
-
if (off != 0)
return (0);
@@ -59,6 +65,10 @@
ql_log(ql_log_info, vha, 0x705d,
"Firmware dump cleared on (%ld).\n", vha->host_no);
+ if (IS_QLA82XX(vha->hw)) {
+ qla82xx_md_free(vha);
+ qla82xx_md_prep(vha);
+ }
ha->fw_dump_reading = 0;
ha->fw_dumped = 0;
break;
@@ -75,10 +85,29 @@
qla2x00_alloc_fw_dump(vha);
break;
case 3:
- qla2x00_system_error(vha);
+ if (IS_QLA82XX(ha)) {
+ qla82xx_idc_lock(ha);
+ qla82xx_set_reset_owner(vha);
+ qla82xx_idc_unlock(ha);
+ } else
+ qla2x00_system_error(vha);
+ break;
+ case 4:
+ if (IS_QLA82XX(ha)) {
+ if (ha->md_tmplt_hdr)
+ ql_dbg(ql_dbg_user, vha, 0x705b,
+ "MiniDump supported with this firmware.\n");
+ else
+ ql_dbg(ql_dbg_user, vha, 0x709d,
+ "MiniDump not supported with this firmware.\n");
+ }
+ break;
+ case 5:
+ if (IS_QLA82XX(ha))
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
}
- return (count);
+ return -EINVAL;
}
static struct bin_attribute sysfs_fw_dump_attr = {
@@ -122,7 +151,7 @@
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->nvram_size ||
!ha->isp_ops->write_nvram)
- return 0;
+ return -EINVAL;
/* Checksum NVRAM. */
if (IS_FWI2_CAPABLE(ha)) {
@@ -165,7 +194,7 @@
qla2xxx_wake_dpc(vha);
qla2x00_wait_for_chip_reset(vha);
- return (count);
+ return count;
}
static struct bin_attribute sysfs_nvram_attr = {
@@ -239,10 +268,10 @@
int val, valid;
if (off)
- return 0;
+ return -EINVAL;
if (unlikely(pci_channel_offline(ha->pdev)))
- return 0;
+ return -EAGAIN;
if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1)
return -EINVAL;
@@ -253,7 +282,7 @@
case 0:
if (ha->optrom_state != QLA_SREADING &&
ha->optrom_state != QLA_SWRITING)
- break;
+ return -EINVAL;
ha->optrom_state = QLA_SWAITING;
@@ -266,7 +295,7 @@
break;
case 1:
if (ha->optrom_state != QLA_SWAITING)
- break;
+ return -EINVAL;
ha->optrom_region_start = start;
ha->optrom_region_size = start + size > ha->optrom_size ?
@@ -280,7 +309,7 @@
"(%x).\n", ha->optrom_region_size);
ha->optrom_state = QLA_SWAITING;
- return count;
+ return -ENOMEM;
}
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
@@ -299,7 +328,7 @@
break;
case 2:
if (ha->optrom_state != QLA_SWAITING)
- break;
+ return -EINVAL;
/*
* We need to be more restrictive on which FLASH regions are
@@ -347,7 +376,7 @@
"(%x)\n", ha->optrom_region_size);
ha->optrom_state = QLA_SWAITING;
- return count;
+ return -ENOMEM;
}
ql_dbg(ql_dbg_user, vha, 0x7067,
@@ -358,7 +387,7 @@
break;
case 3:
if (ha->optrom_state != QLA_SWRITING)
- break;
+ return -ENOMEM;
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x7068,
@@ -374,7 +403,7 @@
ha->optrom_region_start, ha->optrom_region_size);
break;
default:
- count = -EINVAL;
+ return -EINVAL;
}
return count;
}
@@ -398,10 +427,10 @@
struct qla_hw_data *ha = vha->hw;
if (unlikely(pci_channel_offline(ha->pdev)))
- return 0;
+ return -EAGAIN;
if (!capable(CAP_SYS_ADMIN))
- return 0;
+ return -EINVAL;
if (IS_NOCACHE_VPD_TYPE(ha))
ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_vpd << 2,
@@ -438,17 +467,17 @@
/* Update flash version information for 4Gb & above. */
if (!IS_FWI2_CAPABLE(ha))
- goto done;
+ return -EINVAL;
tmp_data = vmalloc(256);
if (!tmp_data) {
ql_log(ql_log_warn, vha, 0x706b,
"Unable to allocate memory for VPD information update.\n");
- goto done;
+ return -ENOMEM;
}
ha->isp_ops->get_flash_version(vha, tmp_data);
vfree(tmp_data);
-done:
+
return count;
}
@@ -505,8 +534,7 @@
"Unable to read SFP data (%x/%x/%x).\n", rval,
addr, offset);
- count = 0;
- break;
+ return -EIO;
}
memcpy(buf, ha->sfp_data, SFP_BLOCK_SIZE);
buf += SFP_BLOCK_SIZE;
@@ -536,7 +564,7 @@
int type;
if (off != 0)
- return 0;
+ return -EINVAL;
type = simple_strtol(buf, NULL, 10);
switch (type) {
@@ -546,13 +574,18 @@
scsi_block_requests(vha->host);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ if (IS_QLA82XX(ha)) {
+ qla82xx_idc_lock(ha);
+ qla82xx_set_reset_owner(vha);
+ qla82xx_idc_unlock(ha);
+ }
qla2xxx_wake_dpc(vha);
qla2x00_wait_for_chip_reset(vha);
scsi_unblock_requests(vha->host);
break;
case 0x2025d:
if (!IS_QLA81XX(ha))
- break;
+ return -EPERM;
ql_log(ql_log_info, vha, 0x706f,
"Issuing MPI reset.\n");
@@ -571,7 +604,7 @@
if (!IS_QLA82XX(ha) || vha != base_vha) {
ql_log(ql_log_info, vha, 0x7071,
"FCoE ctx reset no supported.\n");
- return count;
+ return -EPERM;
}
ql_log(ql_log_info, vha, 0x7072,
@@ -607,7 +640,7 @@
ha->edc_data_len = 0;
if (!capable(CAP_SYS_ADMIN) || off != 0 || count < 8)
- return 0;
+ return -EINVAL;
if (!ha->edc_data) {
ha->edc_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
@@ -615,7 +648,7 @@
if (!ha->edc_data) {
ql_log(ql_log_warn, vha, 0x7073,
"Unable to allocate memory for EDC write.\n");
- return 0;
+ return -ENOMEM;
}
}
@@ -634,9 +667,9 @@
dev, adr, len, opt);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x7074,
- "Unable to write EDC (%x) %02x:%04x:%02x:%02x\n",
+ "Unable to write EDC (%x) %02x:%04x:%02x:%02hhx\n",
rval, dev, adr, opt, len, buf[8]);
- return 0;
+ return -EIO;
}
return count;
@@ -665,7 +698,7 @@
ha->edc_data_len = 0;
if (!capable(CAP_SYS_ADMIN) || off != 0 || count < 8)
- return 0;
+ return -EINVAL;
if (!ha->edc_data) {
ha->edc_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
@@ -673,7 +706,7 @@
if (!ha->edc_data) {
ql_log(ql_log_warn, vha, 0x708c,
"Unable to allocate memory for EDC status.\n");
- return 0;
+ return -ENOMEM;
}
}
@@ -693,7 +726,7 @@
ql_log(ql_log_info, vha, 0x7075,
"Unable to write EDC status (%x) %02x:%04x:%02x.\n",
rval, dev, adr, opt, len);
- return 0;
+ return -EIO;
}
ha->edc_data_len = len;
@@ -805,7 +838,7 @@
if (!ha->dcbx_tlv) {
ql_log(ql_log_warn, vha, 0x7078,
"Unable to allocate memory for DCBX TLV read-data.\n");
- return 0;
+ return -ENOMEM;
}
do_read:
@@ -817,7 +850,7 @@
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x7079,
"Unable to read DCBX TLV (%x).\n", rval);
- count = 0;
+ return -EIO;
}
memcpy(buf, ha->dcbx_tlv, count);
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 07d1767..8b641a8 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -704,6 +704,7 @@
elreq.options = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
if ((ha->current_topology == ISP_CFG_F ||
+ (atomic_read(&vha->loop_state) == LOOP_DOWN) ||
(IS_QLA81XX(ha) &&
le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE
&& req_data_len == MAX_ELS_FRAME_PAYLOAD)) &&
@@ -1447,6 +1448,148 @@
}
static int
+qla2x00_update_fru_versions(struct fc_bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = bsg_job->shost;
+ scsi_qla_host_t *vha = shost_priv(host);
+ struct qla_hw_data *ha = vha->hw;
+ int rval = 0;
+ uint8_t bsg[DMA_POOL_SIZE];
+ struct qla_image_version_list *list = (void *)bsg;
+ struct qla_image_version *image;
+ uint32_t count;
+ dma_addr_t sfp_dma;
+ void *sfp = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &sfp_dma);
+ if (!sfp) {
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+ EXT_STATUS_NO_MEMORY;
+ goto done;
+ }
+
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, list, sizeof(bsg));
+
+ image = list->version;
+ count = list->count;
+ while (count--) {
+ memcpy(sfp, &image->field_info, sizeof(image->field_info));
+ rval = qla2x00_write_sfp(vha, sfp_dma, sfp,
+ image->field_address.device, image->field_address.offset,
+ sizeof(image->field_info), image->field_address.option);
+ if (rval) {
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+ EXT_STATUS_MAILBOX;
+ goto dealloc;
+ }
+ image++;
+ }
+
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] = 0;
+
+dealloc:
+ dma_pool_free(ha->s_dma_pool, sfp, sfp_dma);
+
+done:
+ bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+ bsg_job->reply->result = DID_OK << 16;
+ bsg_job->job_done(bsg_job);
+
+ return 0;
+}
+
+static int
+qla2x00_read_fru_status(struct fc_bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = bsg_job->shost;
+ scsi_qla_host_t *vha = shost_priv(host);
+ struct qla_hw_data *ha = vha->hw;
+ int rval = 0;
+ uint8_t bsg[DMA_POOL_SIZE];
+ struct qla_status_reg *sr = (void *)bsg;
+ dma_addr_t sfp_dma;
+ uint8_t *sfp = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &sfp_dma);
+ if (!sfp) {
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+ EXT_STATUS_NO_MEMORY;
+ goto done;
+ }
+
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, sr, sizeof(*sr));
+
+ rval = qla2x00_read_sfp(vha, sfp_dma, sfp,
+ sr->field_address.device, sr->field_address.offset,
+ sizeof(sr->status_reg), sr->field_address.option);
+ sr->status_reg = *sfp;
+
+ if (rval) {
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+ EXT_STATUS_MAILBOX;
+ goto dealloc;
+ }
+
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, sr, sizeof(*sr));
+
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] = 0;
+
+dealloc:
+ dma_pool_free(ha->s_dma_pool, sfp, sfp_dma);
+
+done:
+ bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+ bsg_job->reply->reply_payload_rcv_len = sizeof(*sr);
+ bsg_job->reply->result = DID_OK << 16;
+ bsg_job->job_done(bsg_job);
+
+ return 0;
+}
+
+static int
+qla2x00_write_fru_status(struct fc_bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = bsg_job->shost;
+ scsi_qla_host_t *vha = shost_priv(host);
+ struct qla_hw_data *ha = vha->hw;
+ int rval = 0;
+ uint8_t bsg[DMA_POOL_SIZE];
+ struct qla_status_reg *sr = (void *)bsg;
+ dma_addr_t sfp_dma;
+ uint8_t *sfp = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &sfp_dma);
+ if (!sfp) {
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+ EXT_STATUS_NO_MEMORY;
+ goto done;
+ }
+
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, sr, sizeof(*sr));
+
+ *sfp = sr->status_reg;
+ rval = qla2x00_write_sfp(vha, sfp_dma, sfp,
+ sr->field_address.device, sr->field_address.offset,
+ sizeof(sr->status_reg), sr->field_address.option);
+
+ if (rval) {
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+ EXT_STATUS_MAILBOX;
+ goto dealloc;
+ }
+
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] = 0;
+
+dealloc:
+ dma_pool_free(ha->s_dma_pool, sfp, sfp_dma);
+
+done:
+ bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+ bsg_job->reply->result = DID_OK << 16;
+ bsg_job->job_done(bsg_job);
+
+ return 0;
+}
+
+static int
qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
{
switch (bsg_job->request->rqst_data.h_vendor.vendor_cmd[0]) {
@@ -1474,6 +1617,15 @@
case QL_VND_UPDATE_FLASH:
return qla2x00_update_optrom(bsg_job);
+ case QL_VND_SET_FRU_VERSION:
+ return qla2x00_update_fru_versions(bsg_job);
+
+ case QL_VND_READ_FRU_STATUS:
+ return qla2x00_read_fru_status(bsg_job);
+
+ case QL_VND_WRITE_FRU_STATUS:
+ return qla2x00_write_fru_status(bsg_job);
+
default:
bsg_job->reply->result = (DID_ERROR << 16);
bsg_job->job_done(bsg_job);
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 0f0f54e..70caa63 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -16,6 +16,16 @@
#define QL_VND_FCP_PRIO_CFG_CMD 0x06
#define QL_VND_READ_FLASH 0x07
#define QL_VND_UPDATE_FLASH 0x08
+#define QL_VND_SET_FRU_VERSION 0x0B
+#define QL_VND_READ_FRU_STATUS 0x0C
+#define QL_VND_WRITE_FRU_STATUS 0x0D
+
+/* BSG Vendor specific subcode returns */
+#define EXT_STATUS_OK 0
+#define EXT_STATUS_ERR 1
+#define EXT_STATUS_INVALID_PARAM 6
+#define EXT_STATUS_MAILBOX 11
+#define EXT_STATUS_NO_MEMORY 17
/* BSG definations for interpreting CommandSent field */
#define INT_DEF_LB_LOOPBACK_CMD 0
@@ -141,4 +151,36 @@
uint16_t mode;
uint16_t speed;
} __attribute__ ((packed));
+
+
+/* FRU VPD */
+
+#define MAX_FRU_SIZE 36
+
+struct qla_field_address {
+ uint16_t offset;
+ uint16_t device;
+ uint16_t option;
+} __packed;
+
+struct qla_field_info {
+ uint8_t version[MAX_FRU_SIZE];
+} __packed;
+
+struct qla_image_version {
+ struct qla_field_address field_address;
+ struct qla_field_info field_info;
+} __packed;
+
+struct qla_image_version_list {
+ uint32_t count;
+ struct qla_image_version version[0];
+} __packed;
+
+struct qla_status_reg {
+ struct qla_field_address field_address;
+ uint8_t status_reg;
+ uint8_t reserved[7];
+} __packed;
+
#endif
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index d79cd8a..9df4787 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -12,7 +12,7 @@
* | Level | Last Value Used | Holes |
* ----------------------------------------------------------------------
* | Module Init and Probe | 0x0116 | |
- * | Mailbox commands | 0x1126 | |
+ * | Mailbox commands | 0x1129 | |
* | Device Discovery | 0x2083 | |
* | Queue Command and IO tracing | 0x302e | 0x3008 |
* | DPC Thread | 0x401c | |
@@ -22,7 +22,7 @@
* | Task Management | 0x8041 | |
* | AER/EEH | 0x900f | |
* | Virtual Port | 0xa007 | |
- * | ISP82XX Specific | 0xb04f | |
+ * | ISP82XX Specific | 0xb051 | |
* | MultiQ | 0xc00b | |
* | Misc | 0xd00b | |
* ----------------------------------------------------------------------
@@ -403,7 +403,7 @@
return ptr + sizeof(struct qla2xxx_mq_chain);
}
-static void
+void
qla2xxx_dump_post_process(scsi_qla_host_t *vha, int rval)
{
struct qla_hw_data *ha = vha->hw;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index a03eaf4..fcf052c 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2438,7 +2438,8 @@
uint32_t quiesce_owner:1;
uint32_t thermal_supported:1;
uint32_t isp82xx_reset_hdlr_active:1;
- /* 26 bits */
+ uint32_t isp82xx_reset_owner:1;
+ /* 28 bits */
} flags;
/* This spinlock is used to protect "io transactions", you must
@@ -2822,6 +2823,12 @@
uint8_t fw_type;
__le32 file_prd_off; /* File firmware product offset */
+
+ uint32_t md_template_size;
+ void *md_tmplt_hdr;
+ dma_addr_t md_tmplt_hdr_dma;
+ void *md_dump;
+ uint32_t md_dump_size;
};
/*
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 29b1a3e..ce32d81 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -104,6 +104,8 @@
extern int ql2xtargetreset;
extern int ql2xdontresethba;
extern unsigned int ql2xmaxlun;
+extern int ql2xmdcapmask;
+extern int ql2xmdenable;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -407,6 +409,8 @@
extern int qla24xx_beacon_on(struct scsi_qla_host *);
extern int qla24xx_beacon_off(struct scsi_qla_host *);
extern void qla24xx_beacon_blink(struct scsi_qla_host *);
+extern int qla82xx_beacon_on(struct scsi_qla_host *);
+extern int qla82xx_beacon_off(struct scsi_qla_host *);
extern uint8_t *qla2x00_read_optrom_data(struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
@@ -442,6 +446,7 @@
extern void ql_dump_regs(uint32_t, scsi_qla_host_t *, int32_t);
extern void ql_dump_buffer(uint32_t, scsi_qla_host_t *, int32_t,
uint8_t *, uint32_t);
+extern void qla2xxx_dump_post_process(scsi_qla_host_t *, int);
/*
* Global Function Prototypes in qla_gs.c source file.
@@ -569,7 +574,10 @@
extern int qla82xx_mbx_intr_disable(scsi_qla_host_t *);
extern void qla82xx_start_iocbs(srb_t *);
extern int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *);
+extern int qla82xx_check_md_needed(scsi_qla_host_t *);
extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *);
+extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int);
+extern char *qdev_state(uint32_t);
/* BSG related functions */
extern int qla24xx_bsg_request(struct fc_bsg_job *);
@@ -579,4 +587,14 @@
dma_addr_t, size_t, uint32_t);
extern int qla2x00_get_idma_speed(scsi_qla_host_t *, uint16_t,
uint16_t *, uint16_t *);
+
+/* Minidump related functions */
+extern int qla82xx_md_get_template_size(scsi_qla_host_t *);
+extern int qla82xx_md_get_template(scsi_qla_host_t *);
+extern int qla82xx_md_alloc(scsi_qla_host_t *);
+extern void qla82xx_md_free(scsi_qla_host_t *);
+extern int qla82xx_md_collect(scsi_qla_host_t *);
+extern void qla82xx_md_prep(scsi_qla_host_t *);
+extern void qla82xx_set_reset_owner(scsi_qla_host_t *);
+
#endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 37da04d3..f03e915f 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1480,13 +1480,19 @@
if (rval == QLA_SUCCESS) {
enable_82xx_npiv:
fw_major_version = ha->fw_major_version;
- rval = qla2x00_get_fw_version(vha,
- &ha->fw_major_version,
- &ha->fw_minor_version,
- &ha->fw_subminor_version,
- &ha->fw_attributes, &ha->fw_memory_size,
- ha->mpi_version, &ha->mpi_capabilities,
- ha->phy_version);
+ if (IS_QLA82XX(ha))
+ qla82xx_check_md_needed(vha);
+ else {
+ rval = qla2x00_get_fw_version(vha,
+ &ha->fw_major_version,
+ &ha->fw_minor_version,
+ &ha->fw_subminor_version,
+ &ha->fw_attributes,
+ &ha->fw_memory_size,
+ ha->mpi_version,
+ &ha->mpi_capabilities,
+ ha->phy_version);
+ }
if (rval != QLA_SUCCESS)
goto failed;
ha->flags.npiv_supported = 0;
@@ -1503,10 +1509,8 @@
&ha->fw_xcb_count, NULL, NULL,
&ha->max_npiv_vports, NULL);
- if (!fw_major_version && ql2xallocfwdump) {
- if (!IS_QLA82XX(ha))
- qla2x00_alloc_fw_dump(vha);
- }
+ if (!fw_major_version && ql2xallocfwdump)
+ qla2x00_alloc_fw_dump(vha);
}
} else {
ql_log(ql_log_fatal, vha, 0x00cd,
@@ -1924,7 +1928,7 @@
rval = qla84xx_init_chip(vha);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn,
- vha, 0x8043,
+ vha, 0x8026,
"Init chip failed.\n");
break;
}
@@ -1933,7 +1937,7 @@
cs84xx_time = jiffies - cs84xx_time;
wtime += cs84xx_time;
mtime += cs84xx_time;
- ql_dbg(ql_dbg_taskm, vha, 0x8042,
+ ql_dbg(ql_dbg_taskm, vha, 0x8025,
"Increasing wait time by %ld. "
"New time %ld.\n", cs84xx_time,
wtime);
@@ -5443,11 +5447,7 @@
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
/* Update the firmware version */
- qla2x00_get_fw_version(vha, &ha->fw_major_version,
- &ha->fw_minor_version, &ha->fw_subminor_version,
- &ha->fw_attributes, &ha->fw_memory_size,
- ha->mpi_version, &ha->mpi_capabilities,
- ha->phy_version);
+ status = qla82xx_check_md_needed(vha);
if (ha->fce) {
ha->flags.fce_enabled = 1;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 8a7591f..3474e86 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2060,6 +2060,11 @@
case ELS_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
break;
+ case MARKER_TYPE:
+ /* Do nothing in this case, this check is to prevent it
+ * from falling into default case
+ */
+ break;
default:
/* Type Not Supported. */
ql_dbg(ql_dbg_async, vha, 0x5042,
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index f7604ea..3b3cec9 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -4186,3 +4186,130 @@
return rval;
}
+
+int
+qla82xx_md_get_template_size(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ int rval = QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx, vha, 0x111f, "Entered %s.\n", __func__);
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = LSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+ mcp->mb[1] = MSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+ mcp->mb[2] = LSW(RQST_TMPLT_SIZE);
+ mcp->mb[3] = MSW(RQST_TMPLT_SIZE);
+
+ mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8|
+ MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+
+ mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD;
+ mcp->tov = MBX_TOV_SECONDS;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ /* Always copy back return mailbox values. */
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1120,
+ "mailbox command FAILED=0x%x, subcode=%x.\n",
+ (mcp->mb[1] << 16) | mcp->mb[0],
+ (mcp->mb[3] << 16) | mcp->mb[2]);
+ } else {
+ ql_dbg(ql_dbg_mbx, vha, 0x1121, "Done %s.\n", __func__);
+ ha->md_template_size = ((mcp->mb[3] << 16) | mcp->mb[2]);
+ if (!ha->md_template_size) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1122,
+ "Null template size obtained.\n");
+ rval = QLA_FUNCTION_FAILED;
+ }
+ }
+ return rval;
+}
+
+int
+qla82xx_md_get_template(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ int rval = QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx, vha, 0x1123, "Entered %s.\n", __func__);
+
+ ha->md_tmplt_hdr = dma_alloc_coherent(&ha->pdev->dev,
+ ha->md_template_size, &ha->md_tmplt_hdr_dma, GFP_KERNEL);
+ if (!ha->md_tmplt_hdr) {
+ ql_log(ql_log_warn, vha, 0x1124,
+ "Unable to allocate memory for Minidump template.\n");
+ return rval;
+ }
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = LSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+ mcp->mb[1] = MSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+ mcp->mb[2] = LSW(RQST_TMPLT);
+ mcp->mb[3] = MSW(RQST_TMPLT);
+ mcp->mb[4] = LSW(LSD(ha->md_tmplt_hdr_dma));
+ mcp->mb[5] = MSW(LSD(ha->md_tmplt_hdr_dma));
+ mcp->mb[6] = LSW(MSD(ha->md_tmplt_hdr_dma));
+ mcp->mb[7] = MSW(MSD(ha->md_tmplt_hdr_dma));
+ mcp->mb[8] = LSW(ha->md_template_size);
+ mcp->mb[9] = MSW(ha->md_template_size);
+
+ mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->out_mb = MBX_11|MBX_10|MBX_9|MBX_8|
+ MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1125,
+ "mailbox command FAILED=0x%x, subcode=%x.\n",
+ ((mcp->mb[1] << 16) | mcp->mb[0]),
+ ((mcp->mb[3] << 16) | mcp->mb[2]));
+ } else
+ ql_dbg(ql_dbg_mbx, vha, 0x1126, "Done %s.\n", __func__);
+ return rval;
+}
+
+int
+qla82xx_mbx_beacon_ctl(scsi_qla_host_t *vha, int enable)
+{
+ int rval;
+ struct qla_hw_data *ha = vha->hw;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA82XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx, vha, 0x1127,
+ "Entered %s.\n", __func__);
+
+ memset(mcp, 0, sizeof(mbx_cmd_t));
+ mcp->mb[0] = MBC_SET_LED_CONFIG;
+ if (enable)
+ mcp->mb[7] = 0xE;
+ else
+ mcp->mb[7] = 0xD;
+
+ mcp->out_mb = MBX_7|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = 30;
+ mcp->flags = 0;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1128,
+ "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+ } else {
+ ql_dbg(ql_dbg_mbx, vha, 0x1129,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 049807c..94bded5 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -7,6 +7,8 @@
#include "qla_def.h"
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/ratelimit.h>
+#include <linux/vmalloc.h>
#include <scsi/scsi_tcq.h>
#define MASK(n) ((1ULL<<(n))-1)
@@ -328,7 +330,7 @@
};
/* Device states */
-char *qdev_state[] = {
+char *q_dev_state[] = {
"Unknown",
"Cold",
"Initializing",
@@ -339,6 +341,11 @@
"Quiescent",
};
+char *qdev_state(uint32_t dev_state)
+{
+ return q_dev_state[dev_state];
+}
+
/*
* In: 'off' is offset from CRB space in 128M pci map
* Out: 'off' is 2M pci map addr
@@ -2355,9 +2362,13 @@
uint32_t drv_state;
int rval;
- drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
- rval = drv_state & (QLA82XX_DRVST_RST_RDY << (ha->portnum * 4));
- return rval;
+ if (ha->flags.isp82xx_reset_owner)
+ return 1;
+ else {
+ drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
+ rval = drv_state & (QLA82XX_DRVST_RST_RDY << (ha->portnum * 4));
+ return rval;
+ }
}
static inline void
@@ -2374,8 +2385,8 @@
drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
}
drv_state |= (QLA82XX_DRVST_RST_RDY << (ha->portnum * 4));
- ql_log(ql_log_info, vha, 0x00bb,
- "drv_state = 0x%x.\n", drv_state);
+ ql_dbg(ql_dbg_init, vha, 0x00bb,
+ "drv_state = 0x%08x.\n", drv_state);
qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state);
}
@@ -2598,7 +2609,7 @@
dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address;
*dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
- *dsd_seg++ = cpu_to_le32(dsd_list_len);
+ cmd_pkt->fcp_data_dseg_len = cpu_to_le32(dsd_list_len);
} else {
*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
@@ -3529,6 +3540,7 @@
qla82xx_need_reset_handler(scsi_qla_host_t *vha)
{
uint32_t dev_state, drv_state, drv_active;
+ uint32_t active_mask = 0;
unsigned long reset_timeout;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
@@ -3541,15 +3553,32 @@
qla82xx_idc_lock(ha);
}
- qla82xx_set_rst_ready(ha);
+ drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
+ if (!ha->flags.isp82xx_reset_owner) {
+ ql_dbg(ql_dbg_p3p, vha, 0xb028,
+ "reset_acknowledged by 0x%x\n", ha->portnum);
+ qla82xx_set_rst_ready(ha);
+ } else {
+ active_mask = ~(QLA82XX_DRV_ACTIVE << (ha->portnum * 4));
+ drv_active &= active_mask;
+ ql_dbg(ql_dbg_p3p, vha, 0xb029,
+ "active_mask: 0x%08x\n", active_mask);
+ }
/* wait for 10 seconds for reset ack from all functions */
reset_timeout = jiffies + (ha->nx_reset_timeout * HZ);
drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
+ dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
- while (drv_state != drv_active) {
+ ql_dbg(ql_dbg_p3p, vha, 0xb02a,
+ "drv_state: 0x%08x, drv_active: 0x%08x, "
+ "dev_state: 0x%08x, active_mask: 0x%08x\n",
+ drv_state, drv_active, dev_state, active_mask);
+
+ while (drv_state != drv_active &&
+ dev_state != QLA82XX_DEV_INITIALIZING) {
if (time_after_eq(jiffies, reset_timeout)) {
ql_log(ql_log_warn, vha, 0x00b5,
"Reset timeout.\n");
@@ -3560,23 +3589,87 @@
qla82xx_idc_lock(ha);
drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
+ if (ha->flags.isp82xx_reset_owner)
+ drv_active &= active_mask;
+ dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
}
- dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ ql_dbg(ql_dbg_p3p, vha, 0xb02b,
+ "drv_state: 0x%08x, drv_active: 0x%08x, "
+ "dev_state: 0x%08x, active_mask: 0x%08x\n",
+ drv_state, drv_active, dev_state, active_mask);
+
ql_log(ql_log_info, vha, 0x00b6,
"Device state is 0x%x = %s.\n",
dev_state,
- dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown");
+ dev_state < MAX_STATES ? qdev_state(dev_state) : "Unknown");
/* Force to DEV_COLD unless someone else is starting a reset */
- if (dev_state != QLA82XX_DEV_INITIALIZING) {
+ if (dev_state != QLA82XX_DEV_INITIALIZING &&
+ dev_state != QLA82XX_DEV_COLD) {
ql_log(ql_log_info, vha, 0x00b7,
"HW State: COLD/RE-INIT.\n");
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_COLD);
+ if (ql2xmdenable) {
+ if (qla82xx_md_collect(vha))
+ ql_log(ql_log_warn, vha, 0xb02c,
+ "Not able to collect minidump.\n");
+ } else
+ ql_log(ql_log_warn, vha, 0xb04f,
+ "Minidump disabled.\n");
}
}
int
+qla82xx_check_md_needed(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint16_t fw_major_version, fw_minor_version, fw_subminor_version;
+ int rval = QLA_SUCCESS;
+
+ fw_major_version = ha->fw_major_version;
+ fw_minor_version = ha->fw_minor_version;
+ fw_subminor_version = ha->fw_subminor_version;
+
+ rval = qla2x00_get_fw_version(vha, &ha->fw_major_version,
+ &ha->fw_minor_version, &ha->fw_subminor_version,
+ &ha->fw_attributes, &ha->fw_memory_size,
+ ha->mpi_version, &ha->mpi_capabilities,
+ ha->phy_version);
+
+ if (rval != QLA_SUCCESS)
+ return rval;
+
+ if (ql2xmdenable) {
+ if (!ha->fw_dumped) {
+ if (fw_major_version != ha->fw_major_version ||
+ fw_minor_version != ha->fw_minor_version ||
+ fw_subminor_version != ha->fw_subminor_version) {
+
+ ql_log(ql_log_info, vha, 0xb02d,
+ "Firmware version differs "
+ "Previous version: %d:%d:%d - "
+ "New version: %d:%d:%d\n",
+ ha->fw_major_version,
+ ha->fw_minor_version,
+ ha->fw_subminor_version,
+ fw_major_version, fw_minor_version,
+ fw_subminor_version);
+ /* Release MiniDump resources */
+ qla82xx_md_free(vha);
+ /* ALlocate MiniDump resources */
+ qla82xx_md_prep(vha);
+ } else
+ ql_log(ql_log_info, vha, 0xb02e,
+ "Firmware dump available to retrieve\n",
+ vha->host_no);
+ }
+ }
+ return rval;
+}
+
+
+int
qla82xx_check_fw_alive(scsi_qla_host_t *vha)
{
uint32_t fw_heartbeat_counter;
@@ -3637,7 +3730,7 @@
ql_log(ql_log_info, vha, 0x009b,
"Device state is 0x%x = %s.\n",
dev_state,
- dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown");
+ dev_state < MAX_STATES ? qdev_state(dev_state) : "Unknown");
/* wait for 30 seconds for device to go ready */
dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ);
@@ -3659,26 +3752,33 @@
ql_log(ql_log_info, vha, 0x009d,
"Device state is 0x%x = %s.\n",
dev_state,
- dev_state < MAX_STATES ? qdev_state[dev_state] :
+ dev_state < MAX_STATES ? qdev_state(dev_state) :
"Unknown");
}
switch (dev_state) {
case QLA82XX_DEV_READY:
+ qla82xx_check_md_needed(vha);
+ ha->flags.isp82xx_reset_owner = 0;
goto exit;
case QLA82XX_DEV_COLD:
rval = qla82xx_device_bootstrap(vha);
- goto exit;
+ break;
case QLA82XX_DEV_INITIALIZING:
qla82xx_idc_unlock(ha);
msleep(1000);
qla82xx_idc_lock(ha);
break;
case QLA82XX_DEV_NEED_RESET:
- if (!ql2xdontresethba)
- qla82xx_need_reset_handler(vha);
+ if (!ql2xdontresethba)
+ qla82xx_need_reset_handler(vha);
+ else {
+ qla82xx_idc_unlock(ha);
+ msleep(1000);
+ qla82xx_idc_lock(ha);
+ }
dev_init_timeout = jiffies +
- (ha->nx_dev_init_timeout * HZ);
+ (ha->nx_dev_init_timeout * HZ);
break;
case QLA82XX_DEV_NEED_QUIESCENT:
qla82xx_need_qsnt_handler(vha);
@@ -3791,6 +3891,28 @@
return rval;
}
+void
+qla82xx_set_reset_owner(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t dev_state;
+
+ dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ if (dev_state == QLA82XX_DEV_READY) {
+ ql_log(ql_log_info, vha, 0xb02f,
+ "HW State: NEED RESET\n");
+ qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+ QLA82XX_DEV_NEED_RESET);
+ ha->flags.isp82xx_reset_owner = 1;
+ ql_dbg(ql_dbg_p3p, vha, 0xb030,
+ "reset_owner is 0x%x\n", ha->portnum);
+ } else
+ ql_log(ql_log_info, vha, 0xb031,
+ "Device state is 0x%x = %s.\n",
+ dev_state,
+ dev_state < MAX_STATES ? qdev_state(dev_state) : "Unknown");
+}
+
/*
* qla82xx_abort_isp
* Resets ISP and aborts all outstanding commands.
@@ -3806,7 +3928,6 @@
{
int rval;
struct qla_hw_data *ha = vha->hw;
- uint32_t dev_state;
if (vha->device_flags & DFLG_DEV_FAILED) {
ql_log(ql_log_warn, vha, 0x8024,
@@ -3816,16 +3937,7 @@
ha->flags.isp82xx_reset_hdlr_active = 1;
qla82xx_idc_lock(ha);
- dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
- if (dev_state == QLA82XX_DEV_READY) {
- ql_log(ql_log_info, vha, 0x8025,
- "HW State: NEED RESET.\n");
- qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
- QLA82XX_DEV_NEED_RESET);
- } else
- ql_log(ql_log_info, vha, 0x8026,
- "Hw State: %s.\n", dev_state < MAX_STATES ?
- qdev_state[dev_state] : "Unknown");
+ qla82xx_set_reset_owner(vha);
qla82xx_idc_unlock(ha);
rval = qla82xx_device_state_handler(vha);
@@ -4016,3 +4128,803 @@
}
}
}
+
+/* Minidump related functions */
+int
+qla82xx_md_rw_32(struct qla_hw_data *ha, uint32_t off, u32 data, uint8_t flag)
+{
+ uint32_t off_value, rval = 0;
+
+ WRT_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase),
+ (off & 0xFFFF0000));
+
+ /* Read back value to make sure write has gone through */
+ RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase));
+ off_value = (off & 0x0000FFFF);
+
+ if (flag)
+ WRT_REG_DWORD((void *)
+ (off_value + CRB_INDIRECT_2M + ha->nx_pcibase),
+ data);
+ else
+ rval = RD_REG_DWORD((void *)
+ (off_value + CRB_INDIRECT_2M + ha->nx_pcibase));
+
+ return rval;
+}
+
+static int
+qla82xx_minidump_process_control(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ struct qla82xx_md_entry_crb *crb_entry;
+ uint32_t read_value, opcode, poll_time;
+ uint32_t addr, index, crb_addr;
+ unsigned long wtime;
+ struct qla82xx_md_template_hdr *tmplt_hdr;
+ uint32_t rval = QLA_SUCCESS;
+ int i;
+
+ tmplt_hdr = (struct qla82xx_md_template_hdr *)ha->md_tmplt_hdr;
+ crb_entry = (struct qla82xx_md_entry_crb *)entry_hdr;
+ crb_addr = crb_entry->addr;
+
+ for (i = 0; i < crb_entry->op_count; i++) {
+ opcode = crb_entry->crb_ctrl.opcode;
+ if (opcode & QLA82XX_DBG_OPCODE_WR) {
+ qla82xx_md_rw_32(ha, crb_addr,
+ crb_entry->value_1, 1);
+ opcode &= ~QLA82XX_DBG_OPCODE_WR;
+ }
+
+ if (opcode & QLA82XX_DBG_OPCODE_RW) {
+ read_value = qla82xx_md_rw_32(ha, crb_addr, 0, 0);
+ qla82xx_md_rw_32(ha, crb_addr, read_value, 1);
+ opcode &= ~QLA82XX_DBG_OPCODE_RW;
+ }
+
+ if (opcode & QLA82XX_DBG_OPCODE_AND) {
+ read_value = qla82xx_md_rw_32(ha, crb_addr, 0, 0);
+ read_value &= crb_entry->value_2;
+ opcode &= ~QLA82XX_DBG_OPCODE_AND;
+ if (opcode & QLA82XX_DBG_OPCODE_OR) {
+ read_value |= crb_entry->value_3;
+ opcode &= ~QLA82XX_DBG_OPCODE_OR;
+ }
+ qla82xx_md_rw_32(ha, crb_addr, read_value, 1);
+ }
+
+ if (opcode & QLA82XX_DBG_OPCODE_OR) {
+ read_value = qla82xx_md_rw_32(ha, crb_addr, 0, 0);
+ read_value |= crb_entry->value_3;
+ qla82xx_md_rw_32(ha, crb_addr, read_value, 1);
+ opcode &= ~QLA82XX_DBG_OPCODE_OR;
+ }
+
+ if (opcode & QLA82XX_DBG_OPCODE_POLL) {
+ poll_time = crb_entry->crb_strd.poll_timeout;
+ wtime = jiffies + poll_time;
+ read_value = qla82xx_md_rw_32(ha, crb_addr, 0, 0);
+
+ do {
+ if ((read_value & crb_entry->value_2)
+ == crb_entry->value_1)
+ break;
+ else if (time_after_eq(jiffies, wtime)) {
+ /* capturing dump failed */
+ rval = QLA_FUNCTION_FAILED;
+ break;
+ } else
+ read_value = qla82xx_md_rw_32(ha,
+ crb_addr, 0, 0);
+ } while (1);
+ opcode &= ~QLA82XX_DBG_OPCODE_POLL;
+ }
+
+ if (opcode & QLA82XX_DBG_OPCODE_RDSTATE) {
+ if (crb_entry->crb_strd.state_index_a) {
+ index = crb_entry->crb_strd.state_index_a;
+ addr = tmplt_hdr->saved_state_array[index];
+ } else
+ addr = crb_addr;
+
+ read_value = qla82xx_md_rw_32(ha, addr, 0, 0);
+ index = crb_entry->crb_ctrl.state_index_v;
+ tmplt_hdr->saved_state_array[index] = read_value;
+ opcode &= ~QLA82XX_DBG_OPCODE_RDSTATE;
+ }
+
+ if (opcode & QLA82XX_DBG_OPCODE_WRSTATE) {
+ if (crb_entry->crb_strd.state_index_a) {
+ index = crb_entry->crb_strd.state_index_a;
+ addr = tmplt_hdr->saved_state_array[index];
+ } else
+ addr = crb_addr;
+
+ if (crb_entry->crb_ctrl.state_index_v) {
+ index = crb_entry->crb_ctrl.state_index_v;
+ read_value =
+ tmplt_hdr->saved_state_array[index];
+ } else
+ read_value = crb_entry->value_1;
+
+ qla82xx_md_rw_32(ha, addr, read_value, 1);
+ opcode &= ~QLA82XX_DBG_OPCODE_WRSTATE;
+ }
+
+ if (opcode & QLA82XX_DBG_OPCODE_MDSTATE) {
+ index = crb_entry->crb_ctrl.state_index_v;
+ read_value = tmplt_hdr->saved_state_array[index];
+ read_value <<= crb_entry->crb_ctrl.shl;
+ read_value >>= crb_entry->crb_ctrl.shr;
+ if (crb_entry->value_2)
+ read_value &= crb_entry->value_2;
+ read_value |= crb_entry->value_3;
+ read_value += crb_entry->value_1;
+ tmplt_hdr->saved_state_array[index] = read_value;
+ opcode &= ~QLA82XX_DBG_OPCODE_MDSTATE;
+ }
+ crb_addr += crb_entry->crb_strd.addr_stride;
+ }
+ return rval;
+}
+
+static void
+qla82xx_minidump_process_rdocm(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t r_addr, r_stride, loop_cnt, i, r_value;
+ struct qla82xx_md_entry_rdocm *ocm_hdr;
+ uint32_t *data_ptr = *d_ptr;
+
+ ocm_hdr = (struct qla82xx_md_entry_rdocm *)entry_hdr;
+ r_addr = ocm_hdr->read_addr;
+ r_stride = ocm_hdr->read_addr_stride;
+ loop_cnt = ocm_hdr->op_count;
+
+ for (i = 0; i < loop_cnt; i++) {
+ r_value = RD_REG_DWORD((void *)(r_addr + ha->nx_pcibase));
+ *data_ptr++ = cpu_to_le32(r_value);
+ r_addr += r_stride;
+ }
+ *d_ptr = data_ptr;
+}
+
+static void
+qla82xx_minidump_process_rdmux(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t r_addr, s_stride, s_addr, s_value, loop_cnt, i, r_value;
+ struct qla82xx_md_entry_mux *mux_hdr;
+ uint32_t *data_ptr = *d_ptr;
+
+ mux_hdr = (struct qla82xx_md_entry_mux *)entry_hdr;
+ r_addr = mux_hdr->read_addr;
+ s_addr = mux_hdr->select_addr;
+ s_stride = mux_hdr->select_value_stride;
+ s_value = mux_hdr->select_value;
+ loop_cnt = mux_hdr->op_count;
+
+ for (i = 0; i < loop_cnt; i++) {
+ qla82xx_md_rw_32(ha, s_addr, s_value, 1);
+ r_value = qla82xx_md_rw_32(ha, r_addr, 0, 0);
+ *data_ptr++ = cpu_to_le32(s_value);
+ *data_ptr++ = cpu_to_le32(r_value);
+ s_value += s_stride;
+ }
+ *d_ptr = data_ptr;
+}
+
+static void
+qla82xx_minidump_process_rdcrb(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t r_addr, r_stride, loop_cnt, i, r_value;
+ struct qla82xx_md_entry_crb *crb_hdr;
+ uint32_t *data_ptr = *d_ptr;
+
+ crb_hdr = (struct qla82xx_md_entry_crb *)entry_hdr;
+ r_addr = crb_hdr->addr;
+ r_stride = crb_hdr->crb_strd.addr_stride;
+ loop_cnt = crb_hdr->op_count;
+
+ for (i = 0; i < loop_cnt; i++) {
+ r_value = qla82xx_md_rw_32(ha, r_addr, 0, 0);
+ *data_ptr++ = cpu_to_le32(r_addr);
+ *data_ptr++ = cpu_to_le32(r_value);
+ r_addr += r_stride;
+ }
+ *d_ptr = data_ptr;
+}
+
+static int
+qla82xx_minidump_process_l2tag(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t addr, r_addr, c_addr, t_r_addr;
+ uint32_t i, k, loop_count, t_value, r_cnt, r_value;
+ unsigned long p_wait, w_time, p_mask;
+ uint32_t c_value_w, c_value_r;
+ struct qla82xx_md_entry_cache *cache_hdr;
+ int rval = QLA_FUNCTION_FAILED;
+ uint32_t *data_ptr = *d_ptr;
+
+ cache_hdr = (struct qla82xx_md_entry_cache *)entry_hdr;
+ loop_count = cache_hdr->op_count;
+ r_addr = cache_hdr->read_addr;
+ c_addr = cache_hdr->control_addr;
+ c_value_w = cache_hdr->cache_ctrl.write_value;
+
+ t_r_addr = cache_hdr->tag_reg_addr;
+ t_value = cache_hdr->addr_ctrl.init_tag_value;
+ r_cnt = cache_hdr->read_ctrl.read_addr_cnt;
+ p_wait = cache_hdr->cache_ctrl.poll_wait;
+ p_mask = cache_hdr->cache_ctrl.poll_mask;
+
+ for (i = 0; i < loop_count; i++) {
+ qla82xx_md_rw_32(ha, t_r_addr, t_value, 1);
+ if (c_value_w)
+ qla82xx_md_rw_32(ha, c_addr, c_value_w, 1);
+
+ if (p_mask) {
+ w_time = jiffies + p_wait;
+ do {
+ c_value_r = qla82xx_md_rw_32(ha, c_addr, 0, 0);
+ if ((c_value_r & p_mask) == 0)
+ break;
+ else if (time_after_eq(jiffies, w_time)) {
+ /* capturing dump failed */
+ ql_dbg(ql_dbg_p3p, vha, 0xb032,
+ "c_value_r: 0x%x, poll_mask: 0x%lx, "
+ "w_time: 0x%lx\n",
+ c_value_r, p_mask, w_time);
+ return rval;
+ }
+ } while (1);
+ }
+
+ addr = r_addr;
+ for (k = 0; k < r_cnt; k++) {
+ r_value = qla82xx_md_rw_32(ha, addr, 0, 0);
+ *data_ptr++ = cpu_to_le32(r_value);
+ addr += cache_hdr->read_ctrl.read_addr_stride;
+ }
+ t_value += cache_hdr->addr_ctrl.tag_value_stride;
+ }
+ *d_ptr = data_ptr;
+ return QLA_SUCCESS;
+}
+
+static void
+qla82xx_minidump_process_l1cache(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t addr, r_addr, c_addr, t_r_addr;
+ uint32_t i, k, loop_count, t_value, r_cnt, r_value;
+ uint32_t c_value_w;
+ struct qla82xx_md_entry_cache *cache_hdr;
+ uint32_t *data_ptr = *d_ptr;
+
+ cache_hdr = (struct qla82xx_md_entry_cache *)entry_hdr;
+ loop_count = cache_hdr->op_count;
+ r_addr = cache_hdr->read_addr;
+ c_addr = cache_hdr->control_addr;
+ c_value_w = cache_hdr->cache_ctrl.write_value;
+
+ t_r_addr = cache_hdr->tag_reg_addr;
+ t_value = cache_hdr->addr_ctrl.init_tag_value;
+ r_cnt = cache_hdr->read_ctrl.read_addr_cnt;
+
+ for (i = 0; i < loop_count; i++) {
+ qla82xx_md_rw_32(ha, t_r_addr, t_value, 1);
+ qla82xx_md_rw_32(ha, c_addr, c_value_w, 1);
+ addr = r_addr;
+ for (k = 0; k < r_cnt; k++) {
+ r_value = qla82xx_md_rw_32(ha, addr, 0, 0);
+ *data_ptr++ = cpu_to_le32(r_value);
+ addr += cache_hdr->read_ctrl.read_addr_stride;
+ }
+ t_value += cache_hdr->addr_ctrl.tag_value_stride;
+ }
+ *d_ptr = data_ptr;
+}
+
+static void
+qla82xx_minidump_process_queue(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t s_addr, r_addr;
+ uint32_t r_stride, r_value, r_cnt, qid = 0;
+ uint32_t i, k, loop_cnt;
+ struct qla82xx_md_entry_queue *q_hdr;
+ uint32_t *data_ptr = *d_ptr;
+
+ q_hdr = (struct qla82xx_md_entry_queue *)entry_hdr;
+ s_addr = q_hdr->select_addr;
+ r_cnt = q_hdr->rd_strd.read_addr_cnt;
+ r_stride = q_hdr->rd_strd.read_addr_stride;
+ loop_cnt = q_hdr->op_count;
+
+ for (i = 0; i < loop_cnt; i++) {
+ qla82xx_md_rw_32(ha, s_addr, qid, 1);
+ r_addr = q_hdr->read_addr;
+ for (k = 0; k < r_cnt; k++) {
+ r_value = qla82xx_md_rw_32(ha, r_addr, 0, 0);
+ *data_ptr++ = cpu_to_le32(r_value);
+ r_addr += r_stride;
+ }
+ qid += q_hdr->q_strd.queue_id_stride;
+ }
+ *d_ptr = data_ptr;
+}
+
+static void
+qla82xx_minidump_process_rdrom(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t r_addr, r_value;
+ uint32_t i, loop_cnt;
+ struct qla82xx_md_entry_rdrom *rom_hdr;
+ uint32_t *data_ptr = *d_ptr;
+
+ rom_hdr = (struct qla82xx_md_entry_rdrom *)entry_hdr;
+ r_addr = rom_hdr->read_addr;
+ loop_cnt = rom_hdr->read_data_size/sizeof(uint32_t);
+
+ for (i = 0; i < loop_cnt; i++) {
+ qla82xx_md_rw_32(ha, MD_DIRECT_ROM_WINDOW,
+ (r_addr & 0xFFFF0000), 1);
+ r_value = qla82xx_md_rw_32(ha,
+ MD_DIRECT_ROM_READ_BASE +
+ (r_addr & 0x0000FFFF), 0, 0);
+ *data_ptr++ = cpu_to_le32(r_value);
+ r_addr += sizeof(uint32_t);
+ }
+ *d_ptr = data_ptr;
+}
+
+static int
+qla82xx_minidump_process_rdmem(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint32_t r_addr, r_value, r_data;
+ uint32_t i, j, loop_cnt;
+ struct qla82xx_md_entry_rdmem *m_hdr;
+ unsigned long flags;
+ int rval = QLA_FUNCTION_FAILED;
+ uint32_t *data_ptr = *d_ptr;
+
+ m_hdr = (struct qla82xx_md_entry_rdmem *)entry_hdr;
+ r_addr = m_hdr->read_addr;
+ loop_cnt = m_hdr->read_data_size/16;
+
+ if (r_addr & 0xf) {
+ ql_log(ql_log_warn, vha, 0xb033,
+ "Read addr 0x%x not 16 bytes alligned\n", r_addr);
+ return rval;
+ }
+
+ if (m_hdr->read_data_size % 16) {
+ ql_log(ql_log_warn, vha, 0xb034,
+ "Read data[0x%x] not multiple of 16 bytes\n",
+ m_hdr->read_data_size);
+ return rval;
+ }
+
+ ql_dbg(ql_dbg_p3p, vha, 0xb035,
+ "[%s]: rdmem_addr: 0x%x, read_data_size: 0x%x, loop_cnt: 0x%x\n",
+ __func__, r_addr, m_hdr->read_data_size, loop_cnt);
+
+ write_lock_irqsave(&ha->hw_lock, flags);
+ for (i = 0; i < loop_cnt; i++) {
+ qla82xx_md_rw_32(ha, MD_MIU_TEST_AGT_ADDR_LO, r_addr, 1);
+ r_value = 0;
+ qla82xx_md_rw_32(ha, MD_MIU_TEST_AGT_ADDR_HI, r_value, 1);
+ r_value = MIU_TA_CTL_ENABLE;
+ qla82xx_md_rw_32(ha, MD_MIU_TEST_AGT_CTRL, r_value, 1);
+ r_value = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE;
+ qla82xx_md_rw_32(ha, MD_MIU_TEST_AGT_CTRL, r_value, 1);
+
+ for (j = 0; j < MAX_CTL_CHECK; j++) {
+ r_value = qla82xx_md_rw_32(ha,
+ MD_MIU_TEST_AGT_CTRL, 0, 0);
+ if ((r_value & MIU_TA_CTL_BUSY) == 0)
+ break;
+ }
+
+ if (j >= MAX_CTL_CHECK) {
+ printk_ratelimited(KERN_ERR
+ "failed to read through agent\n");
+ write_unlock_irqrestore(&ha->hw_lock, flags);
+ return rval;
+ }
+
+ for (j = 0; j < 4; j++) {
+ r_data = qla82xx_md_rw_32(ha,
+ MD_MIU_TEST_AGT_RDDATA[j], 0, 0);
+ *data_ptr++ = cpu_to_le32(r_data);
+ }
+ r_addr += 16;
+ }
+ write_unlock_irqrestore(&ha->hw_lock, flags);
+ *d_ptr = data_ptr;
+ return QLA_SUCCESS;
+}
+
+static int
+qla82xx_validate_template_chksum(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint64_t chksum = 0;
+ uint32_t *d_ptr = (uint32_t *)ha->md_tmplt_hdr;
+ int count = ha->md_template_size/sizeof(uint32_t);
+
+ while (count-- > 0)
+ chksum += *d_ptr++;
+ while (chksum >> 32)
+ chksum = (chksum & 0xFFFFFFFF) + (chksum >> 32);
+ return ~chksum;
+}
+
+static void
+qla82xx_mark_entry_skipped(scsi_qla_host_t *vha,
+ qla82xx_md_entry_hdr_t *entry_hdr, int index)
+{
+ entry_hdr->d_ctrl.driver_flags |= QLA82XX_DBG_SKIPPED_FLAG;
+ ql_dbg(ql_dbg_p3p, vha, 0xb036,
+ "Skipping entry[%d]: "
+ "ETYPE[0x%x]-ELEVEL[0x%x]\n",
+ index, entry_hdr->entry_type,
+ entry_hdr->d_ctrl.entry_capture_mask);
+}
+
+int
+qla82xx_md_collect(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ int no_entry_hdr = 0;
+ qla82xx_md_entry_hdr_t *entry_hdr;
+ struct qla82xx_md_template_hdr *tmplt_hdr;
+ uint32_t *data_ptr;
+ uint32_t total_data_size = 0, f_capture_mask, data_collected = 0;
+ int i = 0, rval = QLA_FUNCTION_FAILED;
+
+ tmplt_hdr = (struct qla82xx_md_template_hdr *)ha->md_tmplt_hdr;
+ data_ptr = (uint32_t *)ha->md_dump;
+
+ if (ha->fw_dumped) {
+ ql_log(ql_log_info, vha, 0xb037,
+ "Firmware dump available to retrive\n");
+ goto md_failed;
+ }
+
+ ha->fw_dumped = 0;
+
+ if (!ha->md_tmplt_hdr || !ha->md_dump) {
+ ql_log(ql_log_warn, vha, 0xb038,
+ "Memory not allocated for minidump capture\n");
+ goto md_failed;
+ }
+
+ if (qla82xx_validate_template_chksum(vha)) {
+ ql_log(ql_log_info, vha, 0xb039,
+ "Template checksum validation error\n");
+ goto md_failed;
+ }
+
+ no_entry_hdr = tmplt_hdr->num_of_entries;
+ ql_dbg(ql_dbg_p3p, vha, 0xb03a,
+ "No of entry headers in Template: 0x%x\n", no_entry_hdr);
+
+ ql_dbg(ql_dbg_p3p, vha, 0xb03b,
+ "Capture Mask obtained: 0x%x\n", tmplt_hdr->capture_debug_level);
+
+ f_capture_mask = tmplt_hdr->capture_debug_level & 0xFF;
+
+ /* Validate whether required debug level is set */
+ if ((f_capture_mask & 0x3) != 0x3) {
+ ql_log(ql_log_warn, vha, 0xb03c,
+ "Minimum required capture mask[0x%x] level not set\n",
+ f_capture_mask);
+ goto md_failed;
+ }
+ tmplt_hdr->driver_capture_mask = ql2xmdcapmask;
+
+ tmplt_hdr->driver_info[0] = vha->host_no;
+ tmplt_hdr->driver_info[1] = (QLA_DRIVER_MAJOR_VER << 24) |
+ (QLA_DRIVER_MINOR_VER << 16) | (QLA_DRIVER_PATCH_VER << 8) |
+ QLA_DRIVER_BETA_VER;
+
+ total_data_size = ha->md_dump_size;
+
+ ql_dbg(ql_log_info, vha, 0xb03d,
+ "Total minidump data_size 0x%x to be captured\n", total_data_size);
+
+ /* Check whether template obtained is valid */
+ if (tmplt_hdr->entry_type != QLA82XX_TLHDR) {
+ ql_log(ql_log_warn, vha, 0xb04e,
+ "Bad template header entry type: 0x%x obtained\n",
+ tmplt_hdr->entry_type);
+ goto md_failed;
+ }
+
+ entry_hdr = (qla82xx_md_entry_hdr_t *) \
+ (((uint8_t *)ha->md_tmplt_hdr) + tmplt_hdr->first_entry_offset);
+
+ /* Walk through the entry headers */
+ for (i = 0; i < no_entry_hdr; i++) {
+
+ if (data_collected > total_data_size) {
+ ql_log(ql_log_warn, vha, 0xb03e,
+ "More MiniDump data collected: [0x%x]\n",
+ data_collected);
+ goto md_failed;
+ }
+
+ if (!(entry_hdr->d_ctrl.entry_capture_mask &
+ ql2xmdcapmask)) {
+ entry_hdr->d_ctrl.driver_flags |=
+ QLA82XX_DBG_SKIPPED_FLAG;
+ ql_dbg(ql_dbg_p3p, vha, 0xb03f,
+ "Skipping entry[%d]: "
+ "ETYPE[0x%x]-ELEVEL[0x%x]\n",
+ i, entry_hdr->entry_type,
+ entry_hdr->d_ctrl.entry_capture_mask);
+ goto skip_nxt_entry;
+ }
+
+ ql_dbg(ql_dbg_p3p, vha, 0xb040,
+ "[%s]: data ptr[%d]: %p, entry_hdr: %p\n"
+ "entry_type: 0x%x, captrue_mask: 0x%x\n",
+ __func__, i, data_ptr, entry_hdr,
+ entry_hdr->entry_type,
+ entry_hdr->d_ctrl.entry_capture_mask);
+
+ ql_dbg(ql_dbg_p3p, vha, 0xb041,
+ "Data collected: [0x%x], Dump size left:[0x%x]\n",
+ data_collected, (ha->md_dump_size - data_collected));
+
+ /* Decode the entry type and take
+ * required action to capture debug data */
+ switch (entry_hdr->entry_type) {
+ case QLA82XX_RDEND:
+ qla82xx_mark_entry_skipped(vha, entry_hdr, i);
+ break;
+ case QLA82XX_CNTRL:
+ rval = qla82xx_minidump_process_control(vha,
+ entry_hdr, &data_ptr);
+ if (rval != QLA_SUCCESS) {
+ qla82xx_mark_entry_skipped(vha, entry_hdr, i);
+ goto md_failed;
+ }
+ break;
+ case QLA82XX_RDCRB:
+ qla82xx_minidump_process_rdcrb(vha,
+ entry_hdr, &data_ptr);
+ break;
+ case QLA82XX_RDMEM:
+ rval = qla82xx_minidump_process_rdmem(vha,
+ entry_hdr, &data_ptr);
+ if (rval != QLA_SUCCESS) {
+ qla82xx_mark_entry_skipped(vha, entry_hdr, i);
+ goto md_failed;
+ }
+ break;
+ case QLA82XX_BOARD:
+ case QLA82XX_RDROM:
+ qla82xx_minidump_process_rdrom(vha,
+ entry_hdr, &data_ptr);
+ break;
+ case QLA82XX_L2DTG:
+ case QLA82XX_L2ITG:
+ case QLA82XX_L2DAT:
+ case QLA82XX_L2INS:
+ rval = qla82xx_minidump_process_l2tag(vha,
+ entry_hdr, &data_ptr);
+ if (rval != QLA_SUCCESS) {
+ qla82xx_mark_entry_skipped(vha, entry_hdr, i);
+ goto md_failed;
+ }
+ break;
+ case QLA82XX_L1DAT:
+ case QLA82XX_L1INS:
+ qla82xx_minidump_process_l1cache(vha,
+ entry_hdr, &data_ptr);
+ break;
+ case QLA82XX_RDOCM:
+ qla82xx_minidump_process_rdocm(vha,
+ entry_hdr, &data_ptr);
+ break;
+ case QLA82XX_RDMUX:
+ qla82xx_minidump_process_rdmux(vha,
+ entry_hdr, &data_ptr);
+ break;
+ case QLA82XX_QUEUE:
+ qla82xx_minidump_process_queue(vha,
+ entry_hdr, &data_ptr);
+ break;
+ case QLA82XX_RDNOP:
+ default:
+ qla82xx_mark_entry_skipped(vha, entry_hdr, i);
+ break;
+ }
+
+ ql_dbg(ql_dbg_p3p, vha, 0xb042,
+ "[%s]: data ptr[%d]: %p\n", __func__, i, data_ptr);
+
+ data_collected = (uint8_t *)data_ptr -
+ (uint8_t *)ha->md_dump;
+skip_nxt_entry:
+ entry_hdr = (qla82xx_md_entry_hdr_t *) \
+ (((uint8_t *)entry_hdr) + entry_hdr->entry_size);
+ }
+
+ if (data_collected != total_data_size) {
+ ql_dbg(ql_log_warn, vha, 0xb043,
+ "MiniDump data mismatch: Data collected: [0x%x],"
+ "total_data_size:[0x%x]\n",
+ data_collected, total_data_size);
+ goto md_failed;
+ }
+
+ ql_log(ql_log_info, vha, 0xb044,
+ "Firmware dump saved to temp buffer (%ld/%p %ld/%p).\n",
+ vha->host_no, ha->md_tmplt_hdr, vha->host_no, ha->md_dump);
+ ha->fw_dumped = 1;
+ qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
+
+md_failed:
+ return rval;
+}
+
+int
+qla82xx_md_alloc(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ int i, k;
+ struct qla82xx_md_template_hdr *tmplt_hdr;
+
+ tmplt_hdr = (struct qla82xx_md_template_hdr *)ha->md_tmplt_hdr;
+
+ if (ql2xmdcapmask < 0x3 || ql2xmdcapmask > 0x7F) {
+ ql2xmdcapmask = tmplt_hdr->capture_debug_level & 0xFF;
+ ql_log(ql_log_info, vha, 0xb045,
+ "Forcing driver capture mask to firmware default capture mask: 0x%x.\n",
+ ql2xmdcapmask);
+ }
+
+ for (i = 0x2, k = 1; (i & QLA82XX_DEFAULT_CAP_MASK); i <<= 1, k++) {
+ if (i & ql2xmdcapmask)
+ ha->md_dump_size += tmplt_hdr->capture_size_array[k];
+ }
+
+ if (ha->md_dump) {
+ ql_log(ql_log_warn, vha, 0xb046,
+ "Firmware dump previously allocated.\n");
+ return 1;
+ }
+
+ ha->md_dump = vmalloc(ha->md_dump_size);
+ if (ha->md_dump == NULL) {
+ ql_log(ql_log_warn, vha, 0xb047,
+ "Unable to allocate memory for Minidump size "
+ "(0x%x).\n", ha->md_dump_size);
+ return 1;
+ }
+ return 0;
+}
+
+void
+qla82xx_md_free(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+
+ /* Release the template header allocated */
+ if (ha->md_tmplt_hdr) {
+ ql_log(ql_log_info, vha, 0xb048,
+ "Free MiniDump template: %p, size (%d KB)\n",
+ ha->md_tmplt_hdr, ha->md_template_size / 1024);
+ dma_free_coherent(&ha->pdev->dev, ha->md_template_size,
+ ha->md_tmplt_hdr, ha->md_tmplt_hdr_dma);
+ ha->md_tmplt_hdr = 0;
+ }
+
+ /* Release the template data buffer allocated */
+ if (ha->md_dump) {
+ ql_log(ql_log_info, vha, 0xb049,
+ "Free MiniDump memory: %p, size (%d KB)\n",
+ ha->md_dump, ha->md_dump_size / 1024);
+ vfree(ha->md_dump);
+ ha->md_dump_size = 0;
+ ha->md_dump = 0;
+ }
+}
+
+void
+qla82xx_md_prep(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ int rval;
+
+ /* Get Minidump template size */
+ rval = qla82xx_md_get_template_size(vha);
+ if (rval == QLA_SUCCESS) {
+ ql_log(ql_log_info, vha, 0xb04a,
+ "MiniDump Template size obtained (%d KB)\n",
+ ha->md_template_size / 1024);
+
+ /* Get Minidump template */
+ rval = qla82xx_md_get_template(vha);
+ if (rval == QLA_SUCCESS) {
+ ql_dbg(ql_dbg_p3p, vha, 0xb04b,
+ "MiniDump Template obtained\n");
+
+ /* Allocate memory for minidump */
+ rval = qla82xx_md_alloc(vha);
+ if (rval == QLA_SUCCESS)
+ ql_log(ql_log_info, vha, 0xb04c,
+ "MiniDump memory allocated (%d KB)\n",
+ ha->md_dump_size / 1024);
+ else {
+ ql_log(ql_log_info, vha, 0xb04d,
+ "Free MiniDump template: %p, size: (%d KB)\n",
+ ha->md_tmplt_hdr,
+ ha->md_template_size / 1024);
+ dma_free_coherent(&ha->pdev->dev,
+ ha->md_template_size,
+ ha->md_tmplt_hdr, ha->md_tmplt_hdr_dma);
+ ha->md_tmplt_hdr = 0;
+ }
+
+ }
+ }
+}
+
+int
+qla82xx_beacon_on(struct scsi_qla_host *vha)
+{
+
+ int rval;
+ struct qla_hw_data *ha = vha->hw;
+ qla82xx_idc_lock(ha);
+ rval = qla82xx_mbx_beacon_ctl(vha, 1);
+
+ if (rval) {
+ ql_log(ql_log_warn, vha, 0xb050,
+ "mbx set led config failed in %s\n", __func__);
+ goto exit;
+ }
+ ha->beacon_blink_led = 1;
+exit:
+ qla82xx_idc_unlock(ha);
+ return rval;
+}
+
+int
+qla82xx_beacon_off(struct scsi_qla_host *vha)
+{
+
+ int rval;
+ struct qla_hw_data *ha = vha->hw;
+ qla82xx_idc_lock(ha);
+ rval = qla82xx_mbx_beacon_ctl(vha, 0);
+
+ if (rval) {
+ ql_log(ql_log_warn, vha, 0xb051,
+ "mbx set led config failed in %s\n", __func__);
+ goto exit;
+ }
+ ha->beacon_blink_led = 0;
+exit:
+ qla82xx_idc_unlock(ha);
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 8a21832c..57820c1 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -484,8 +484,6 @@
#define QLA82XX_ADDR_OCM1 (0x0000000200400000ULL)
#define QLA82XX_ADDR_OCM1_MAX (0x00000002004fffffULL)
#define QLA82XX_ADDR_QDR_NET (0x0000000300000000ULL)
-
-#define QLA82XX_P2_ADDR_QDR_NET_MAX (0x00000003001fffffULL)
#define QLA82XX_P3_ADDR_QDR_NET_MAX (0x0000000303ffffffULL)
#define QLA82XX_PCI_CRBSPACE (unsigned long)0x06000000
@@ -890,6 +888,7 @@
};
#define MBC_TOGGLE_INTERRUPT 0x10
+#define MBC_SET_LED_CONFIG 0x125
/* Flash offset */
#define FLT_REG_BOOTLOAD_82XX 0x72
@@ -922,4 +921,256 @@
#define M25P_INSTR_DP 0xb9
#define M25P_INSTR_RES 0xab
+/* Minidump related */
+
+/*
+ * Version of the template
+ * 4 Bytes
+ * X.Major.Minor.RELEASE
+ */
+#define QLA82XX_MINIDUMP_VERSION 0x10101
+
+/*
+ * Entry Type Defines
+ */
+#define QLA82XX_RDNOP 0
+#define QLA82XX_RDCRB 1
+#define QLA82XX_RDMUX 2
+#define QLA82XX_QUEUE 3
+#define QLA82XX_BOARD 4
+#define QLA82XX_RDSRE 5
+#define QLA82XX_RDOCM 6
+#define QLA82XX_CACHE 10
+#define QLA82XX_L1DAT 11
+#define QLA82XX_L1INS 12
+#define QLA82XX_L2DTG 21
+#define QLA82XX_L2ITG 22
+#define QLA82XX_L2DAT 23
+#define QLA82XX_L2INS 24
+#define QLA82XX_RDROM 71
+#define QLA82XX_RDMEM 72
+#define QLA82XX_CNTRL 98
+#define QLA82XX_TLHDR 99
+#define QLA82XX_RDEND 255
+
+/*
+ * Opcodes for Control Entries.
+ * These Flags are bit fields.
+ */
+#define QLA82XX_DBG_OPCODE_WR 0x01
+#define QLA82XX_DBG_OPCODE_RW 0x02
+#define QLA82XX_DBG_OPCODE_AND 0x04
+#define QLA82XX_DBG_OPCODE_OR 0x08
+#define QLA82XX_DBG_OPCODE_POLL 0x10
+#define QLA82XX_DBG_OPCODE_RDSTATE 0x20
+#define QLA82XX_DBG_OPCODE_WRSTATE 0x40
+#define QLA82XX_DBG_OPCODE_MDSTATE 0x80
+
+/*
+ * Template Header and Entry Header definitions start here.
+ */
+
+/*
+ * Template Header
+ * Parts of the template header can be modified by the driver.
+ * These include the saved_state_array, capture_debug_level, driver_timestamp
+ */
+
+#define QLA82XX_DBG_STATE_ARRAY_LEN 16
+#define QLA82XX_DBG_CAP_SIZE_ARRAY_LEN 8
+#define QLA82XX_DBG_RSVD_ARRAY_LEN 8
+
+/*
+ * Driver Flags
+ */
+#define QLA82XX_DBG_SKIPPED_FLAG 0x80 /* driver skipped this entry */
+#define QLA82XX_DEFAULT_CAP_MASK 0xFF /* default capture mask */
+
+struct qla82xx_md_template_hdr {
+ uint32_t entry_type;
+ uint32_t first_entry_offset;
+ uint32_t size_of_template;
+ uint32_t capture_debug_level;
+
+ uint32_t num_of_entries;
+ uint32_t version;
+ uint32_t driver_timestamp;
+ uint32_t template_checksum;
+
+ uint32_t driver_capture_mask;
+ uint32_t driver_info[3];
+
+ uint32_t saved_state_array[QLA82XX_DBG_STATE_ARRAY_LEN];
+ uint32_t capture_size_array[QLA82XX_DBG_CAP_SIZE_ARRAY_LEN];
+
+ /* markers_array used to capture some special locations on board */
+ uint32_t markers_array[QLA82XX_DBG_RSVD_ARRAY_LEN];
+ uint32_t num_of_free_entries; /* For internal use */
+ uint32_t free_entry_offset; /* For internal use */
+ uint32_t total_table_size; /* For internal use */
+ uint32_t bkup_table_offset; /* For internal use */
+} __packed;
+
+/*
+ * Entry Header: Common to All Entry Types
+ */
+
+/*
+ * Driver Code is for driver to write some info about the entry.
+ * Currently not used.
+ */
+typedef struct qla82xx_md_entry_hdr {
+ uint32_t entry_type;
+ uint32_t entry_size;
+ uint32_t entry_capture_size;
+ struct {
+ uint8_t entry_capture_mask;
+ uint8_t entry_code;
+ uint8_t driver_code;
+ uint8_t driver_flags;
+ } d_ctrl;
+} __packed qla82xx_md_entry_hdr_t;
+
+/*
+ * Read CRB entry header
+ */
+struct qla82xx_md_entry_crb {
+ qla82xx_md_entry_hdr_t h;
+ uint32_t addr;
+ struct {
+ uint8_t addr_stride;
+ uint8_t state_index_a;
+ uint16_t poll_timeout;
+ } crb_strd;
+
+ uint32_t data_size;
+ uint32_t op_count;
+
+ struct {
+ uint8_t opcode;
+ uint8_t state_index_v;
+ uint8_t shl;
+ uint8_t shr;
+ } crb_ctrl;
+
+ uint32_t value_1;
+ uint32_t value_2;
+ uint32_t value_3;
+} __packed;
+
+/*
+ * Cache entry header
+ */
+struct qla82xx_md_entry_cache {
+ qla82xx_md_entry_hdr_t h;
+
+ uint32_t tag_reg_addr;
+ struct {
+ uint16_t tag_value_stride;
+ uint16_t init_tag_value;
+ } addr_ctrl;
+
+ uint32_t data_size;
+ uint32_t op_count;
+
+ uint32_t control_addr;
+ struct {
+ uint16_t write_value;
+ uint8_t poll_mask;
+ uint8_t poll_wait;
+ } cache_ctrl;
+
+ uint32_t read_addr;
+ struct {
+ uint8_t read_addr_stride;
+ uint8_t read_addr_cnt;
+ uint16_t rsvd_1;
+ } read_ctrl;
+} __packed;
+
+/*
+ * Read OCM
+ */
+struct qla82xx_md_entry_rdocm {
+ qla82xx_md_entry_hdr_t h;
+
+ uint32_t rsvd_0;
+ uint32_t rsvd_1;
+ uint32_t data_size;
+ uint32_t op_count;
+
+ uint32_t rsvd_2;
+ uint32_t rsvd_3;
+ uint32_t read_addr;
+ uint32_t read_addr_stride;
+ uint32_t read_addr_cntrl;
+} __packed;
+
+/*
+ * Read Memory
+ */
+struct qla82xx_md_entry_rdmem {
+ qla82xx_md_entry_hdr_t h;
+ uint32_t rsvd[6];
+ uint32_t read_addr;
+ uint32_t read_data_size;
+} __packed;
+
+/*
+ * Read ROM
+ */
+struct qla82xx_md_entry_rdrom {
+ qla82xx_md_entry_hdr_t h;
+ uint32_t rsvd[6];
+ uint32_t read_addr;
+ uint32_t read_data_size;
+} __packed;
+
+struct qla82xx_md_entry_mux {
+ qla82xx_md_entry_hdr_t h;
+
+ uint32_t select_addr;
+ uint32_t rsvd_0;
+ uint32_t data_size;
+ uint32_t op_count;
+
+ uint32_t select_value;
+ uint32_t select_value_stride;
+ uint32_t read_addr;
+ uint32_t rsvd_1;
+} __packed;
+
+struct qla82xx_md_entry_queue {
+ qla82xx_md_entry_hdr_t h;
+
+ uint32_t select_addr;
+ struct {
+ uint16_t queue_id_stride;
+ uint16_t rsvd_0;
+ } q_strd;
+
+ uint32_t data_size;
+ uint32_t op_count;
+ uint32_t rsvd_1;
+ uint32_t rsvd_2;
+
+ uint32_t read_addr;
+ struct {
+ uint8_t read_addr_stride;
+ uint8_t read_addr_cnt;
+ uint16_t rsvd_3;
+ } rd_strd;
+} __packed;
+
+#define MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE 0x129
+#define RQST_TMPLT_SIZE 0x0
+#define RQST_TMPLT 0x1
+#define MD_DIRECT_ROM_WINDOW 0x42110030
+#define MD_DIRECT_ROM_READ_BASE 0x42150000
+#define MD_MIU_TEST_AGT_CTRL 0x41000090
+#define MD_MIU_TEST_AGT_ADDR_LO 0x41000094
+#define MD_MIU_TEST_AGT_ADDR_HI 0x41000098
+
+static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
+ 0x410000B8, 0x410000BC };
#endif
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1e69527..fd14c7b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -143,7 +143,7 @@
"Set it to 1 to turn on the cpu affinity.");
int ql2xfwloadbin;
-module_param(ql2xfwloadbin, int, S_IRUGO);
+module_param(ql2xfwloadbin, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xfwloadbin,
"Option to specify location from which to load ISP firmware:.\n"
" 2 -- load firmware via the request_firmware() (hotplug).\n"
@@ -158,11 +158,11 @@
"Default is 0 - skip ETS enablement.");
int ql2xdbwr = 1;
-module_param(ql2xdbwr, int, S_IRUGO);
+module_param(ql2xdbwr, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xdbwr,
- "Option to specify scheme for request queue posting.\n"
- " 0 -- Regular doorbell.\n"
- " 1 -- CAMRAM doorbell (faster).\n");
+ "Option to specify scheme for request queue posting.\n"
+ " 0 -- Regular doorbell.\n"
+ " 1 -- CAMRAM doorbell (faster).\n");
int ql2xtargetreset = 1;
module_param(ql2xtargetreset, int, S_IRUGO);
@@ -183,11 +183,11 @@
"Default is 0 - Issue TM IOCBs via mailbox mechanism.");
int ql2xdontresethba;
-module_param(ql2xdontresethba, int, S_IRUGO);
+module_param(ql2xdontresethba, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xdontresethba,
- "Option to specify reset behaviour.\n"
- " 0 (Default) -- Reset on failure.\n"
- " 1 -- Do not reset on failure.\n");
+ "Option to specify reset behaviour.\n"
+ " 0 (Default) -- Reset on failure.\n"
+ " 1 -- Do not reset on failure.\n");
uint ql2xmaxlun = MAX_LUNS;
module_param(ql2xmaxlun, uint, S_IRUGO);
@@ -195,6 +195,19 @@
"Defines the maximum LU number to register with the SCSI "
"midlayer. Default is 65535.");
+int ql2xmdcapmask = 0x1F;
+module_param(ql2xmdcapmask, int, S_IRUGO);
+MODULE_PARM_DESC(ql2xmdcapmask,
+ "Set the Minidump driver capture mask level. "
+ "Default is 0x7F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F.");
+
+int ql2xmdenable;
+module_param(ql2xmdenable, int, S_IRUGO);
+MODULE_PARM_DESC(ql2xmdenable,
+ "Enable/disable MiniDump. "
+ "0 (Default) - MiniDump disabled. "
+ "1 - MiniDump enabled.");
+
/*
* SCSI host template entry points
*/
@@ -1750,9 +1763,9 @@
.read_nvram = qla24xx_read_nvram_data,
.write_nvram = qla24xx_write_nvram_data,
.fw_dump = qla24xx_fw_dump,
- .beacon_on = qla24xx_beacon_on,
- .beacon_off = qla24xx_beacon_off,
- .beacon_blink = qla24xx_beacon_blink,
+ .beacon_on = qla82xx_beacon_on,
+ .beacon_off = qla82xx_beacon_off,
+ .beacon_blink = NULL,
.read_optrom = qla82xx_read_optrom_data,
.write_optrom = qla82xx_write_optrom_data,
.get_flash_version = qla24xx_get_flash_version,
@@ -2670,6 +2683,8 @@
qla2x00_mem_free(ha);
+ qla82xx_md_free(vha);
+
qla2x00_free_queues(ha);
}
@@ -3903,8 +3918,11 @@
/* Check if beacon LED needs to be blinked for physical host only */
if (!vha->vp_idx && (ha->beacon_blink_led == 1)) {
- set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
- start_dpc++;
+ /* There is no beacon_blink function for ISP82xx */
+ if (!IS_QLA82XX(ha)) {
+ set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
+ start_dpc++;
+ }
}
/* Process any deferred work. */
diff --git a/drivers/scsi/qla4xxx/Kconfig b/drivers/scsi/qla4xxx/Kconfig
index 0f5599e..f1ad02e 100644
--- a/drivers/scsi/qla4xxx/Kconfig
+++ b/drivers/scsi/qla4xxx/Kconfig
@@ -2,6 +2,7 @@
tristate "QLogic ISP4XXX and ISP82XX host adapter family support"
depends on PCI && SCSI && NET
select SCSI_ISCSI_ATTRS
+ select ISCSI_BOOT_SYSFS
---help---
This driver supports the QLogic 40xx (ISP4XXX) and 8022 (ISP82XX)
iSCSI host adapter family.
diff --git a/drivers/scsi/qla4xxx/Makefile b/drivers/scsi/qla4xxx/Makefile
index 252523d..5b44139 100644
--- a/drivers/scsi/qla4xxx/Makefile
+++ b/drivers/scsi/qla4xxx/Makefile
@@ -1,5 +1,5 @@
qla4xxx-y := ql4_os.o ql4_init.o ql4_mbx.o ql4_iocb.o ql4_isr.o \
- ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o
+ ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o ql4_bsg.o
obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx.o
diff --git a/drivers/scsi/qla4xxx/ql4_attr.c b/drivers/scsi/qla4xxx/ql4_attr.c
index 864d018..0b0a7d4 100644
--- a/drivers/scsi/qla4xxx/ql4_attr.c
+++ b/drivers/scsi/qla4xxx/ql4_attr.c
@@ -55,15 +55,91 @@
ha->bootload_patch, ha->bootload_build);
}
+static ssize_t
+qla4xxx_board_id_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev));
+ return snprintf(buf, PAGE_SIZE, "0x%08X\n", ha->board_id);
+}
+
+static ssize_t
+qla4xxx_fw_state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev));
+
+ qla4xxx_get_firmware_state(ha);
+ return snprintf(buf, PAGE_SIZE, "0x%08X%8X\n", ha->firmware_state,
+ ha->addl_fw_state);
+}
+
+static ssize_t
+qla4xxx_phy_port_cnt_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev));
+
+ if (!is_qla8022(ha))
+ return -ENOSYS;
+
+ return snprintf(buf, PAGE_SIZE, "0x%04X\n", ha->phy_port_cnt);
+}
+
+static ssize_t
+qla4xxx_phy_port_num_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev));
+
+ if (!is_qla8022(ha))
+ return -ENOSYS;
+
+ return snprintf(buf, PAGE_SIZE, "0x%04X\n", ha->phy_port_num);
+}
+
+static ssize_t
+qla4xxx_iscsi_func_cnt_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev));
+
+ if (!is_qla8022(ha))
+ return -ENOSYS;
+
+ return snprintf(buf, PAGE_SIZE, "0x%04X\n", ha->iscsi_pci_func_cnt);
+}
+
+static ssize_t
+qla4xxx_hba_model_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev));
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", ha->model_name);
+}
+
static DEVICE_ATTR(fw_version, S_IRUGO, qla4xxx_fw_version_show, NULL);
static DEVICE_ATTR(serial_num, S_IRUGO, qla4xxx_serial_num_show, NULL);
static DEVICE_ATTR(iscsi_version, S_IRUGO, qla4xxx_iscsi_version_show, NULL);
static DEVICE_ATTR(optrom_version, S_IRUGO, qla4xxx_optrom_version_show, NULL);
+static DEVICE_ATTR(board_id, S_IRUGO, qla4xxx_board_id_show, NULL);
+static DEVICE_ATTR(fw_state, S_IRUGO, qla4xxx_fw_state_show, NULL);
+static DEVICE_ATTR(phy_port_cnt, S_IRUGO, qla4xxx_phy_port_cnt_show, NULL);
+static DEVICE_ATTR(phy_port_num, S_IRUGO, qla4xxx_phy_port_num_show, NULL);
+static DEVICE_ATTR(iscsi_func_cnt, S_IRUGO, qla4xxx_iscsi_func_cnt_show, NULL);
+static DEVICE_ATTR(hba_model, S_IRUGO, qla4xxx_hba_model_show, NULL);
struct device_attribute *qla4xxx_host_attrs[] = {
&dev_attr_fw_version,
&dev_attr_serial_num,
&dev_attr_iscsi_version,
&dev_attr_optrom_version,
+ &dev_attr_board_id,
+ &dev_attr_fw_state,
+ &dev_attr_phy_port_cnt,
+ &dev_attr_phy_port_num,
+ &dev_attr_iscsi_func_cnt,
+ &dev_attr_hba_model,
NULL,
};
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.c b/drivers/scsi/qla4xxx/ql4_bsg.c
new file mode 100644
index 0000000..8acdc58
--- /dev/null
+++ b/drivers/scsi/qla4xxx/ql4_bsg.c
@@ -0,0 +1,513 @@
+/*
+ * QLogic iSCSI HBA Driver
+ * Copyright (c) 2011 QLogic Corporation
+ *
+ * See LICENSE.qla4xxx for copyright and licensing details.
+ */
+
+#include "ql4_def.h"
+#include "ql4_glbl.h"
+#include "ql4_bsg.h"
+
+static int
+qla4xxx_read_flash(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ uint32_t offset = 0;
+ uint32_t length = 0;
+ dma_addr_t flash_dma;
+ uint8_t *flash = NULL;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ if (ha->flash_state != QLFLASH_WAITING) {
+ ql4_printk(KERN_ERR, ha, "%s: another flash operation "
+ "active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ ha->flash_state = QLFLASH_READING;
+ offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ length = bsg_job->reply_payload.payload_len;
+
+ flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma,
+ GFP_KERNEL);
+ if (!flash) {
+ ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash "
+ "data\n", __func__);
+ rval = -ENOMEM;
+ goto leave;
+ }
+
+ rval = qla4xxx_get_flash(ha, flash_dma, offset, length);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: get flash failed\n", __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else {
+ bsg_reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt,
+ flash, length);
+ bsg_reply->result = DID_OK << 16;
+ }
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+ dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma);
+leave:
+ ha->flash_state = QLFLASH_WAITING;
+ return rval;
+}
+
+static int
+qla4xxx_update_flash(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ uint32_t length = 0;
+ uint32_t offset = 0;
+ uint32_t options = 0;
+ dma_addr_t flash_dma;
+ uint8_t *flash = NULL;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ if (ha->flash_state != QLFLASH_WAITING) {
+ ql4_printk(KERN_ERR, ha, "%s: another flash operation "
+ "active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ ha->flash_state = QLFLASH_WRITING;
+ length = bsg_job->request_payload.payload_len;
+ offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ options = bsg_req->rqst_data.h_vendor.vendor_cmd[2];
+
+ flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma,
+ GFP_KERNEL);
+ if (!flash) {
+ ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash "
+ "data\n", __func__);
+ rval = -ENOMEM;
+ goto leave;
+ }
+
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, flash, length);
+
+ rval = qla4xxx_set_flash(ha, flash_dma, offset, length, options);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: set flash failed\n", __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else
+ bsg_reply->result = DID_OK << 16;
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+ dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma);
+leave:
+ ha->flash_state = QLFLASH_WAITING;
+ return rval;
+}
+
+static int
+qla4xxx_get_acb_state(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ uint32_t status[MBOX_REG_COUNT];
+ uint32_t acb_idx;
+ uint32_t ip_idx;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ /* Only 4022 and above adapters are supported */
+ if (is_qla4010(ha))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ if (bsg_job->reply_payload.payload_len < sizeof(status)) {
+ ql4_printk(KERN_ERR, ha, "%s: invalid payload len %d\n",
+ __func__, bsg_job->reply_payload.payload_len);
+ rval = -EINVAL;
+ goto leave;
+ }
+
+ acb_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ ip_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[2];
+
+ rval = qla4xxx_get_ip_state(ha, acb_idx, ip_idx, status);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: get ip state failed\n",
+ __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else {
+ bsg_reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt,
+ status, sizeof(status));
+ bsg_reply->result = DID_OK << 16;
+ }
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+leave:
+ return rval;
+}
+
+static int
+qla4xxx_read_nvram(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ uint32_t offset = 0;
+ uint32_t len = 0;
+ uint32_t total_len = 0;
+ dma_addr_t nvram_dma;
+ uint8_t *nvram = NULL;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ /* Only 40xx adapters are supported */
+ if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha)))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ len = bsg_job->reply_payload.payload_len;
+ total_len = offset + len;
+
+ /* total len should not be greater than max NVRAM size */
+ if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) ||
+ ((is_qla4022(ha) || is_qla4032(ha)) &&
+ total_len > QL40X2_NVRAM_SIZE)) {
+ ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max"
+ " nvram size, offset=%d len=%d\n",
+ __func__, offset, len);
+ goto leave;
+ }
+
+ nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma,
+ GFP_KERNEL);
+ if (!nvram) {
+ ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for nvram "
+ "data\n", __func__);
+ rval = -ENOMEM;
+ goto leave;
+ }
+
+ rval = qla4xxx_get_nvram(ha, nvram_dma, offset, len);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: get nvram failed\n", __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else {
+ bsg_reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt,
+ nvram, len);
+ bsg_reply->result = DID_OK << 16;
+ }
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+ dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma);
+leave:
+ return rval;
+}
+
+static int
+qla4xxx_update_nvram(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ uint32_t offset = 0;
+ uint32_t len = 0;
+ uint32_t total_len = 0;
+ dma_addr_t nvram_dma;
+ uint8_t *nvram = NULL;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha)))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ len = bsg_job->request_payload.payload_len;
+ total_len = offset + len;
+
+ /* total len should not be greater than max NVRAM size */
+ if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) ||
+ ((is_qla4022(ha) || is_qla4032(ha)) &&
+ total_len > QL40X2_NVRAM_SIZE)) {
+ ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max"
+ " nvram size, offset=%d len=%d\n",
+ __func__, offset, len);
+ goto leave;
+ }
+
+ nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma,
+ GFP_KERNEL);
+ if (!nvram) {
+ ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash "
+ "data\n", __func__);
+ rval = -ENOMEM;
+ goto leave;
+ }
+
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, nvram, len);
+
+ rval = qla4xxx_set_nvram(ha, nvram_dma, offset, len);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else
+ bsg_reply->result = DID_OK << 16;
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+ dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma);
+leave:
+ return rval;
+}
+
+static int
+qla4xxx_restore_defaults(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ uint32_t region = 0;
+ uint32_t field0 = 0;
+ uint32_t field1 = 0;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ if (is_qla4010(ha))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ region = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ field0 = bsg_req->rqst_data.h_vendor.vendor_cmd[2];
+ field1 = bsg_req->rqst_data.h_vendor.vendor_cmd[3];
+
+ rval = qla4xxx_restore_factory_defaults(ha, region, field0, field1);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else
+ bsg_reply->result = DID_OK << 16;
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+leave:
+ return rval;
+}
+
+static int
+qla4xxx_bsg_get_acb(struct bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ uint32_t acb_type = 0;
+ uint32_t len = 0;
+ dma_addr_t acb_dma;
+ uint8_t *acb = NULL;
+ int rval = -EINVAL;
+
+ bsg_reply->reply_payload_rcv_len = 0;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto leave;
+
+ /* Only 4022 and above adapters are supported */
+ if (is_qla4010(ha))
+ goto leave;
+
+ if (ql4xxx_reset_active(ha)) {
+ ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+ rval = -EBUSY;
+ goto leave;
+ }
+
+ acb_type = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+ len = bsg_job->reply_payload.payload_len;
+ if (len < sizeof(struct addr_ctrl_blk)) {
+ ql4_printk(KERN_ERR, ha, "%s: invalid acb len %d\n",
+ __func__, len);
+ rval = -EINVAL;
+ goto leave;
+ }
+
+ acb = dma_alloc_coherent(&ha->pdev->dev, len, &acb_dma, GFP_KERNEL);
+ if (!acb) {
+ ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for acb "
+ "data\n", __func__);
+ rval = -ENOMEM;
+ goto leave;
+ }
+
+ rval = qla4xxx_get_acb(ha, acb_dma, acb_type, len);
+ if (rval) {
+ ql4_printk(KERN_ERR, ha, "%s: get acb failed\n", __func__);
+ bsg_reply->result = DID_ERROR << 16;
+ rval = -EIO;
+ } else {
+ bsg_reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt,
+ acb, len);
+ bsg_reply->result = DID_OK << 16;
+ }
+
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+ dma_free_coherent(&ha->pdev->dev, len, acb, acb_dma);
+leave:
+ return rval;
+}
+
+/**
+ * qla4xxx_process_vendor_specific - handle vendor specific bsg request
+ * @job: iscsi_bsg_job to handle
+ **/
+int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
+{
+ struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+
+ switch (bsg_req->rqst_data.h_vendor.vendor_cmd[0]) {
+ case QLISCSI_VND_READ_FLASH:
+ return qla4xxx_read_flash(bsg_job);
+
+ case QLISCSI_VND_UPDATE_FLASH:
+ return qla4xxx_update_flash(bsg_job);
+
+ case QLISCSI_VND_GET_ACB_STATE:
+ return qla4xxx_get_acb_state(bsg_job);
+
+ case QLISCSI_VND_READ_NVRAM:
+ return qla4xxx_read_nvram(bsg_job);
+
+ case QLISCSI_VND_UPDATE_NVRAM:
+ return qla4xxx_update_nvram(bsg_job);
+
+ case QLISCSI_VND_RESTORE_DEFAULTS:
+ return qla4xxx_restore_defaults(bsg_job);
+
+ case QLISCSI_VND_GET_ACB:
+ return qla4xxx_bsg_get_acb(bsg_job);
+
+ default:
+ ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
+ "0x%x\n", __func__, bsg_req->msgcode);
+ bsg_reply->result = (DID_ERROR << 16);
+ bsg_reply->reply_payload_rcv_len = 0;
+ bsg_job_done(bsg_job, bsg_reply->result,
+ bsg_reply->reply_payload_rcv_len);
+ return -ENOSYS;
+ }
+}
+
+/**
+ * qla4xxx_bsg_request - handle bsg request from ISCSI transport
+ * @job: iscsi_bsg_job to handle
+ */
+int qla4xxx_bsg_request(struct bsg_job *bsg_job)
+{
+ struct iscsi_bsg_request *bsg_req = bsg_job->request;
+ struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+ struct scsi_qla_host *ha = to_qla_host(host);
+
+ switch (bsg_req->msgcode) {
+ case ISCSI_BSG_HST_VENDOR:
+ return qla4xxx_process_vendor_specific(bsg_job);
+
+ default:
+ ql4_printk(KERN_ERR, ha, "%s: invalid BSG command: 0x%x\n",
+ __func__, bsg_req->msgcode);
+ }
+
+ return -ENOSYS;
+}
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.h b/drivers/scsi/qla4xxx/ql4_bsg.h
new file mode 100644
index 0000000..c6a03645
--- /dev/null
+++ b/drivers/scsi/qla4xxx/ql4_bsg.h
@@ -0,0 +1,19 @@
+/*
+ * QLogic iSCSI HBA Driver
+ * Copyright (c) 2011 QLogic Corporation
+ *
+ * See LICENSE.qla4xxx for copyright and licensing details.
+ */
+#ifndef __QL4_BSG_H
+#define __QL4_BSG_H
+
+/* BSG Vendor specific commands */
+#define QLISCSI_VND_READ_FLASH 1
+#define QLISCSI_VND_UPDATE_FLASH 2
+#define QLISCSI_VND_GET_ACB_STATE 3
+#define QLISCSI_VND_READ_NVRAM 4
+#define QLISCSI_VND_UPDATE_NVRAM 5
+#define QLISCSI_VND_RESTORE_DEFAULTS 6
+#define QLISCSI_VND_GET_ACB 7
+
+#endif
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 473c5c8..ace637b 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -25,6 +25,7 @@
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/aer.h>
+#include <linux/bsg-lib.h>
#include <net/tcp.h>
#include <scsi/scsi.h>
@@ -33,9 +34,14 @@
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_iscsi.h>
+#include <scsi/scsi_bsg_iscsi.h>
+#include <scsi/scsi_netlink.h>
+#include <scsi/libiscsi.h>
#include "ql4_dbg.h"
#include "ql4_nx.h"
+#include "ql4_fw.h"
+#include "ql4_nvram.h"
#ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
#define PCI_DEVICE_ID_QLOGIC_ISP4010 0x4010
@@ -109,7 +115,7 @@
#define MAX_BUSES 1
#define MAX_TARGETS MAX_DEV_DB_ENTRIES
#define MAX_LUNS 0xffff
-#define MAX_AEN_ENTRIES 256 /* should be > EXT_DEF_MAX_AEN_QUEUE */
+#define MAX_AEN_ENTRIES MAX_DEV_DB_ENTRIES
#define MAX_DDB_ENTRIES MAX_DEV_DB_ENTRIES
#define MAX_PDU_ENTRIES 32
#define INVALID_ENTRY 0xFFFF
@@ -166,6 +172,7 @@
#define RELOGIN_TOV 18
#define ISNS_DEREG_TOV 5
#define HBA_ONLINE_TOV 30
+#define DISABLE_ACB_TOV 30
#define MAX_RESET_HA_RETRIES 2
@@ -227,52 +234,12 @@
* Device Database (DDB) structure
*/
struct ddb_entry {
- struct list_head list; /* ddb list */
struct scsi_qla_host *ha;
struct iscsi_cls_session *sess;
struct iscsi_cls_conn *conn;
- atomic_t state; /* DDB State */
-
- unsigned long flags; /* DDB Flags */
-
uint16_t fw_ddb_index; /* DDB firmware index */
- uint16_t options;
uint32_t fw_ddb_device_state; /* F/W Device State -- see ql4_fw.h */
-
- uint32_t CmdSn;
- uint16_t target_session_id;
- uint16_t connection_id;
- uint16_t exe_throttle; /* Max mumber of cmds outstanding
- * simultaneously */
- uint16_t task_mgmt_timeout; /* Min time for task mgmt cmds to
- * complete */
- uint16_t default_relogin_timeout; /* Max time to wait for
- * relogin to complete */
- uint16_t tcp_source_port_num;
- uint32_t default_time2wait; /* Default Min time between
- * relogins (+aens) */
-
- atomic_t retry_relogin_timer; /* Min Time between relogins
- * (4000 only) */
- atomic_t relogin_timer; /* Max Time to wait for relogin to complete */
- atomic_t relogin_retry_count; /* Num of times relogin has been
- * retried */
-
- uint16_t port;
- uint32_t tpgt;
- uint8_t ip_addr[IP_ADDR_LEN];
- uint8_t iscsi_name[ISCSI_NAME_SIZE]; /* 72 x48 */
- uint8_t iscsi_alias[0x20];
- uint8_t isid[6];
- uint16_t iscsi_max_burst_len;
- uint16_t iscsi_max_outsnd_r2t;
- uint16_t iscsi_first_burst_len;
- uint16_t iscsi_max_rcv_data_seg_len;
- uint16_t iscsi_max_snd_data_seg_len;
-
- struct in6_addr remote_ipv6_addr;
- struct in6_addr link_local_ipv6_addr;
};
/*
@@ -293,8 +260,6 @@
#define DF_FO_MASKED 3
-#include "ql4_fw.h"
-#include "ql4_nvram.h"
struct ql82xx_hw_data {
/* Offsets for flash/nvram access (set to ~0 if not used). */
@@ -312,7 +277,10 @@
uint32_t flt_region_boot;
uint32_t flt_region_bootload;
uint32_t flt_region_fw;
- uint32_t reserved;
+
+ uint32_t flt_iscsi_param;
+ uint32_t flt_region_chap;
+ uint32_t flt_chap_size;
};
struct qla4_8xxx_legacy_intr_set {
@@ -357,6 +325,68 @@
int (*get_sys_info) (struct scsi_qla_host *);
};
+/*qla4xxx ipaddress configuration details */
+struct ipaddress_config {
+ uint16_t ipv4_options;
+ uint16_t tcp_options;
+ uint16_t ipv4_vlan_tag;
+ uint8_t ipv4_addr_state;
+ uint8_t ip_address[IP_ADDR_LEN];
+ uint8_t subnet_mask[IP_ADDR_LEN];
+ uint8_t gateway[IP_ADDR_LEN];
+ uint32_t ipv6_options;
+ uint32_t ipv6_addl_options;
+ uint8_t ipv6_link_local_state;
+ uint8_t ipv6_addr0_state;
+ uint8_t ipv6_addr1_state;
+ uint8_t ipv6_default_router_state;
+ uint16_t ipv6_vlan_tag;
+ struct in6_addr ipv6_link_local_addr;
+ struct in6_addr ipv6_addr0;
+ struct in6_addr ipv6_addr1;
+ struct in6_addr ipv6_default_router_addr;
+ uint16_t eth_mtu_size;
+ uint16_t ipv4_port;
+ uint16_t ipv6_port;
+};
+
+#define QL4_CHAP_MAX_NAME_LEN 256
+#define QL4_CHAP_MAX_SECRET_LEN 100
+#define LOCAL_CHAP 0
+#define BIDI_CHAP 1
+
+struct ql4_chap_format {
+ u8 intr_chap_name[QL4_CHAP_MAX_NAME_LEN];
+ u8 intr_secret[QL4_CHAP_MAX_SECRET_LEN];
+ u8 target_chap_name[QL4_CHAP_MAX_NAME_LEN];
+ u8 target_secret[QL4_CHAP_MAX_SECRET_LEN];
+ u16 intr_chap_name_length;
+ u16 intr_secret_length;
+ u16 target_chap_name_length;
+ u16 target_secret_length;
+};
+
+struct ip_address_format {
+ u8 ip_type;
+ u8 ip_address[16];
+};
+
+struct ql4_conn_info {
+ u16 dest_port;
+ struct ip_address_format dest_ipaddr;
+ struct ql4_chap_format chap;
+};
+
+struct ql4_boot_session_info {
+ u8 target_name[224];
+ struct ql4_conn_info conn_list[1];
+};
+
+struct ql4_boot_tgt_info {
+ struct ql4_boot_session_info boot_pri_sess;
+ struct ql4_boot_session_info boot_sec_sess;
+};
+
/*
* Linux Host Adapter structure
*/
@@ -451,10 +481,6 @@
/* --- From Init_FW --- */
/* init_cb_t *init_cb; */
uint16_t firmware_options;
- uint16_t tcp_options;
- uint8_t ip_address[IP_ADDR_LEN];
- uint8_t subnet_mask[IP_ADDR_LEN];
- uint8_t gateway[IP_ADDR_LEN];
uint8_t alias[32];
uint8_t name_string[256];
uint8_t heartbeat_interval;
@@ -462,7 +488,7 @@
/* --- From FlashSysInfo --- */
uint8_t my_mac[MAC_ADDR_LEN];
uint8_t serial_number[16];
-
+ uint16_t port_num;
/* --- From GetFwState --- */
uint32_t firmware_state;
uint32_t addl_fw_state;
@@ -524,31 +550,13 @@
volatile uint8_t mbox_status_count;
volatile uint32_t mbox_status[MBOX_REG_COUNT];
- /* local device database list (contains internal ddb entries) */
- struct list_head ddb_list;
-
- /* Map ddb_list entry by FW ddb index */
+ /* FW ddb index map */
struct ddb_entry *fw_ddb_index_map[MAX_DDB_ENTRIES];
/* Saved srb for status continuation entry processing */
struct srb *status_srb;
- /* IPv6 support info from InitFW */
uint8_t acb_version;
- uint8_t ipv4_addr_state;
- uint16_t ipv4_options;
-
- uint32_t resvd2;
- uint32_t ipv6_options;
- uint32_t ipv6_addl_options;
- uint8_t ipv6_link_local_state;
- uint8_t ipv6_addr0_state;
- uint8_t ipv6_addr1_state;
- uint8_t ipv6_default_router_state;
- struct in6_addr ipv6_link_local_addr;
- struct in6_addr ipv6_addr0;
- struct in6_addr ipv6_addr1;
- struct in6_addr ipv6_default_router_addr;
/* qla82xx specific fields */
struct device_reg_82xx __iomem *qla4_8xxx_reg; /* Base I/O address */
@@ -584,6 +592,11 @@
struct completion mbx_intr_comp;
+ struct ipaddress_config ip_config;
+ struct iscsi_iface *iface_ipv4;
+ struct iscsi_iface *iface_ipv6_0;
+ struct iscsi_iface *iface_ipv6_1;
+
/* --- From About Firmware --- */
uint16_t iscsi_major;
uint16_t iscsi_minor;
@@ -591,16 +604,60 @@
uint16_t bootload_minor;
uint16_t bootload_patch;
uint16_t bootload_build;
+
+ uint32_t flash_state;
+#define QLFLASH_WAITING 0
+#define QLFLASH_READING 1
+#define QLFLASH_WRITING 2
+ struct dma_pool *chap_dma_pool;
+ uint8_t *chap_list; /* CHAP table cache */
+ struct mutex chap_sem;
+#define CHAP_DMA_BLOCK_SIZE 512
+ struct workqueue_struct *task_wq;
+ unsigned long ddb_idx_map[MAX_DDB_ENTRIES / BITS_PER_LONG];
+#define SYSFS_FLAG_FW_SEL_BOOT 2
+ struct iscsi_boot_kset *boot_kset;
+ struct ql4_boot_tgt_info boot_tgt;
+ uint16_t phy_port_num;
+ uint16_t phy_port_cnt;
+ uint16_t iscsi_pci_func_cnt;
+ uint8_t model_name[16];
+ struct completion disable_acb_comp;
+};
+
+struct ql4_task_data {
+ struct scsi_qla_host *ha;
+ uint8_t iocb_req_cnt;
+ dma_addr_t data_dma;
+ void *req_buffer;
+ dma_addr_t req_dma;
+ uint32_t req_len;
+ void *resp_buffer;
+ dma_addr_t resp_dma;
+ uint32_t resp_len;
+ struct iscsi_task *task;
+ struct passthru_status sts;
+ struct work_struct task_work;
+};
+
+struct qla_endpoint {
+ struct Scsi_Host *host;
+ struct sockaddr dst_addr;
+};
+
+struct qla_conn {
+ struct qla_endpoint *qla_ep;
};
static inline int is_ipv4_enabled(struct scsi_qla_host *ha)
{
- return ((ha->ipv4_options & IPOPT_IPv4_PROTOCOL_ENABLE) != 0);
+ return ((ha->ip_config.ipv4_options & IPOPT_IPV4_PROTOCOL_ENABLE) != 0);
}
static inline int is_ipv6_enabled(struct scsi_qla_host *ha)
{
- return ((ha->ipv6_options & IPV6_OPT_IPV6_PROTOCOL_ENABLE) != 0);
+ return ((ha->ip_config.ipv6_options &
+ IPV6_OPT_IPV6_PROTOCOL_ENABLE) != 0);
}
static inline int is_qla4010(struct scsi_qla_host *ha)
@@ -618,6 +675,11 @@
return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP4032;
}
+static inline int is_qla40XX(struct scsi_qla_host *ha)
+{
+ return is_qla4032(ha) || is_qla4022(ha) || is_qla4010(ha);
+}
+
static inline int is_qla8022(struct scsi_qla_host *ha)
{
return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
@@ -640,7 +702,7 @@
static inline struct scsi_qla_host* to_qla_host(struct Scsi_Host *shost)
{
- return (struct scsi_qla_host *)shost->hostdata;
+ return (struct scsi_qla_host *)iscsi_host_priv(shost);
}
static inline void __iomem* isp_semaphore(struct scsi_qla_host *ha)
@@ -760,6 +822,16 @@
ql4xxx_sem_unlock(a, QL4022_DRVR_SEM_MASK);
}
+static inline int ql4xxx_reset_active(struct scsi_qla_host *ha)
+{
+ return test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
+ test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
+ test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) ||
+ test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
+ test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags) ||
+ test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
+
+}
/*---------------------------------------------------------------------------*/
/* Defines for qla4xxx_initialize_adapter() and qla4xxx_recover_adapter() */
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 01082aa..cbd5a20 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -146,6 +146,13 @@
#define QL4022_NVRAM_SEM_MASK (QL4022_RESOURCE_MASK_BASE_CODE << (10+16))
#define QL4022_FLASH_SEM_MASK (QL4022_RESOURCE_MASK_BASE_CODE << (13+16))
+/* nvram address for 4032 */
+#define NVRAM_PORT0_BOOT_MODE 0x03b1
+#define NVRAM_PORT0_BOOT_PRI_TGT 0x03b2
+#define NVRAM_PORT0_BOOT_SEC_TGT 0x03bb
+#define NVRAM_PORT1_BOOT_MODE 0x07b1
+#define NVRAM_PORT1_BOOT_PRI_TGT 0x07b2
+#define NVRAM_PORT1_BOOT_SEC_TGT 0x07bb
/* Page # defines for 4022 */
@@ -194,6 +201,9 @@
/* ISP 4022 nvram definitions */
#define NVR_WRITE_ENABLE 0x00000010 /* 4022 */
+#define QL4010_NVRAM_SIZE 0x200
+#define QL40X2_NVRAM_SIZE 0x800
+
/* ISP port_status definitions */
/* ISP Semaphore definitions */
@@ -241,6 +251,8 @@
#define FA_BOOT_CODE_ADDR_82 0x20000
#define FA_RISC_CODE_ADDR_82 0x40000
#define FA_GOLD_RISC_CODE_ADDR_82 0x80000
+#define FA_FLASH_ISCSI_CHAP 0x540000
+#define FA_FLASH_CHAP_SIZE 0xC0000
/* Flash Description Table */
struct qla_fdt_layout {
@@ -296,8 +308,11 @@
#define FLT_REG_FLT 0x1c
#define FLT_REG_BOOTLOAD_82 0x72
#define FLT_REG_FW_82 0x74
+#define FLT_REG_FW_82_1 0x97
#define FLT_REG_GOLD_FW_82 0x75
#define FLT_REG_BOOT_CODE_82 0x78
+#define FLT_REG_ISCSI_PARAM 0x65
+#define FLT_REG_ISCSI_CHAP 0x63
struct qla_flt_region {
uint32_t code;
@@ -331,9 +346,11 @@
#define MBOX_CMD_WRITE_FLASH 0x0025
#define MBOX_CMD_READ_FLASH 0x0026
#define MBOX_CMD_CLEAR_DATABASE_ENTRY 0x0031
+#define MBOX_CMD_CONN_OPEN 0x0074
#define MBOX_CMD_CONN_CLOSE_SESS_LOGOUT 0x0056
-#define LOGOUT_OPTION_CLOSE_SESSION 0x01
-#define LOGOUT_OPTION_RELOGIN 0x02
+#define LOGOUT_OPTION_CLOSE_SESSION 0x0002
+#define LOGOUT_OPTION_RELOGIN 0x0004
+#define LOGOUT_OPTION_FREE_DDB 0x0008
#define MBOX_CMD_EXECUTE_IOCB_A64 0x005A
#define MBOX_CMD_INITIALIZE_FIRMWARE 0x0060
#define MBOX_CMD_GET_INIT_FW_CTRL_BLOCK 0x0061
@@ -342,12 +359,15 @@
#define MBOX_CMD_GET_DATABASE_ENTRY 0x0064
#define DDB_DS_UNASSIGNED 0x00
#define DDB_DS_NO_CONNECTION_ACTIVE 0x01
+#define DDB_DS_DISCOVERY 0x02
#define DDB_DS_SESSION_ACTIVE 0x04
#define DDB_DS_SESSION_FAILED 0x06
#define DDB_DS_LOGIN_IN_PROCESS 0x07
#define MBOX_CMD_GET_FW_STATE 0x0069
#define MBOX_CMD_GET_INIT_FW_CTRL_BLOCK_DEFAULTS 0x006A
#define MBOX_CMD_GET_SYS_INFO 0x0078
+#define MBOX_CMD_GET_NVRAM 0x0078 /* For 40xx */
+#define MBOX_CMD_SET_NVRAM 0x0079 /* For 40xx */
#define MBOX_CMD_RESTORE_FACTORY_DEFAULTS 0x0087
#define MBOX_CMD_SET_ACB 0x0088
#define MBOX_CMD_GET_ACB 0x0089
@@ -375,7 +395,10 @@
#define FW_ADDSTATE_DHCPv4_LEASE_EXPIRED 0x0008
#define FW_ADDSTATE_LINK_UP 0x0010
#define FW_ADDSTATE_ISNS_SVC_ENABLED 0x0020
+
#define MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS 0x006B
+#define IPV6_DEFAULT_DDB_ENTRY 0x0001
+
#define MBOX_CMD_CONN_OPEN_SESS_LOGIN 0x0074
#define MBOX_CMD_GET_CRASH_RECORD 0x0076 /* 4010 only */
#define MBOX_CMD_GET_CONN_EVENT_LOG 0x0077
@@ -434,6 +457,14 @@
#define ACB_STATE_VALID 0x05
#define ACB_STATE_DISABLING 0x06
+/* FLASH offsets */
+#define FLASH_SEGMENT_IFCB 0x04000000
+
+#define FLASH_OPT_RMW_HOLD 0
+#define FLASH_OPT_RMW_INIT 1
+#define FLASH_OPT_COMMIT 2
+#define FLASH_OPT_RMW_COMMIT 3
+
/*************************************************************************/
/* Host Adapter Initialization Control Block (from host) */
@@ -455,7 +486,8 @@
uint8_t res0; /* 07 */
uint16_t eth_mtu_size; /* 08-09 */
uint16_t add_fw_options; /* 0A-0B */
-#define SERIALIZE_TASK_MGMT 0x0400
+#define ADFWOPT_SERIALIZE_TASK_MGMT 0x0400
+#define ADFWOPT_AUTOCONN_DISABLE 0x0002
uint8_t hb_interval; /* 0C */
uint8_t inst_num; /* 0D */
@@ -473,8 +505,10 @@
uint16_t iscsi_opts; /* 30-31 */
uint16_t ipv4_tcp_opts; /* 32-33 */
+#define TCPOPT_DHCP_ENABLE 0x0200
uint16_t ipv4_ip_opts; /* 34-35 */
-#define IPOPT_IPv4_PROTOCOL_ENABLE 0x8000
+#define IPOPT_IPV4_PROTOCOL_ENABLE 0x8000
+#define IPOPT_VLAN_TAGGING_ENABLE 0x2000
uint16_t iscsi_max_pdu_size; /* 36-37 */
uint8_t ipv4_tos; /* 38 */
@@ -526,6 +560,7 @@
uint16_t ipv6_port; /* 204-205 */
uint16_t ipv6_opts; /* 206-207 */
#define IPV6_OPT_IPV6_PROTOCOL_ENABLE 0x8000
+#define IPV6_OPT_VLAN_TAGGING_ENABLE 0x2000
uint16_t ipv6_addtl_opts; /* 208-209 */
#define IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE 0x0002 /* Pri ACB
@@ -574,13 +609,105 @@
/* struct addr_ctrl_blk sec;*/
};
+#define PRIMARI_ACB 0
+#define SECONDARY_ACB 1
+
+struct addr_ctrl_blk_def {
+ uint8_t reserved1[1]; /* 00 */
+ uint8_t control; /* 01 */
+ uint8_t reserved2[11]; /* 02-0C */
+ uint8_t inst_num; /* 0D */
+ uint8_t reserved3[34]; /* 0E-2F */
+ uint16_t iscsi_opts; /* 30-31 */
+ uint16_t ipv4_tcp_opts; /* 32-33 */
+ uint16_t ipv4_ip_opts; /* 34-35 */
+ uint16_t iscsi_max_pdu_size; /* 36-37 */
+ uint8_t ipv4_tos; /* 38 */
+ uint8_t ipv4_ttl; /* 39 */
+ uint8_t reserved4[2]; /* 3A-3B */
+ uint16_t def_timeout; /* 3C-3D */
+ uint16_t iscsi_fburst_len; /* 3E-3F */
+ uint8_t reserved5[4]; /* 40-43 */
+ uint16_t iscsi_max_outstnd_r2t; /* 44-45 */
+ uint8_t reserved6[2]; /* 46-47 */
+ uint16_t ipv4_port; /* 48-49 */
+ uint16_t iscsi_max_burst_len; /* 4A-4B */
+ uint8_t reserved7[4]; /* 4C-4F */
+ uint8_t ipv4_addr[4]; /* 50-53 */
+ uint16_t ipv4_vlan_tag; /* 54-55 */
+ uint8_t ipv4_addr_state; /* 56 */
+ uint8_t ipv4_cacheid; /* 57 */
+ uint8_t reserved8[8]; /* 58-5F */
+ uint8_t ipv4_subnet[4]; /* 60-63 */
+ uint8_t reserved9[12]; /* 64-6F */
+ uint8_t ipv4_gw_addr[4]; /* 70-73 */
+ uint8_t reserved10[84]; /* 74-C7 */
+ uint8_t abort_timer; /* C8 */
+ uint8_t ipv4_tcp_wsf; /* C9 */
+ uint8_t reserved11[10]; /* CA-D3 */
+ uint8_t ipv4_dhcp_vid_len; /* D4 */
+ uint8_t ipv4_dhcp_vid[11]; /* D5-DF */
+ uint8_t reserved12[20]; /* E0-F3 */
+ uint8_t ipv4_dhcp_alt_cid_len; /* F4 */
+ uint8_t ipv4_dhcp_alt_cid[11]; /* F5-FF */
+ uint8_t iscsi_name[224]; /* 100-1DF */
+ uint8_t reserved13[32]; /* 1E0-1FF */
+ uint32_t cookie; /* 200-203 */
+ uint16_t ipv6_port; /* 204-205 */
+ uint16_t ipv6_opts; /* 206-207 */
+ uint16_t ipv6_addtl_opts; /* 208-209 */
+ uint16_t ipv6_tcp_opts; /* 20A-20B */
+ uint8_t ipv6_tcp_wsf; /* 20C */
+ uint16_t ipv6_flow_lbl; /* 20D-20F */
+ uint8_t ipv6_dflt_rtr_addr[16]; /* 210-21F */
+ uint16_t ipv6_vlan_tag; /* 220-221 */
+ uint8_t ipv6_lnk_lcl_addr_state; /* 222 */
+ uint8_t ipv6_addr0_state; /* 223 */
+ uint8_t ipv6_addr1_state; /* 224 */
+ uint8_t ipv6_dflt_rtr_state; /* 225 */
+ uint8_t ipv6_traffic_class; /* 226 */
+ uint8_t ipv6_hop_limit; /* 227 */
+ uint8_t ipv6_if_id[8]; /* 228-22F */
+ uint8_t ipv6_addr0[16]; /* 230-23F */
+ uint8_t ipv6_addr1[16]; /* 240-24F */
+ uint32_t ipv6_nd_reach_time; /* 250-253 */
+ uint32_t ipv6_nd_rexmit_timer; /* 254-257 */
+ uint32_t ipv6_nd_stale_timeout; /* 258-25B */
+ uint8_t ipv6_dup_addr_detect_count; /* 25C */
+ uint8_t ipv6_cache_id; /* 25D */
+ uint8_t reserved14[18]; /* 25E-26F */
+ uint32_t ipv6_gw_advrt_mtu; /* 270-273 */
+ uint8_t reserved15[140]; /* 274-2FF */
+};
+
/*************************************************************************/
+#define MAX_CHAP_ENTRIES_40XX 128
+#define MAX_CHAP_ENTRIES_82XX 1024
+#define MAX_RESRV_CHAP_IDX 3
+#define FLASH_CHAP_OFFSET 0x06000000
+
+struct ql4_chap_table {
+ uint16_t link;
+ uint8_t flags;
+ uint8_t secret_len;
+#define MIN_CHAP_SECRET_LEN 12
+#define MAX_CHAP_SECRET_LEN 100
+ uint8_t secret[MAX_CHAP_SECRET_LEN];
+#define MAX_CHAP_NAME_LEN 256
+ uint8_t name[MAX_CHAP_NAME_LEN];
+ uint16_t reserved;
+#define CHAP_VALID_COOKIE 0x4092
+#define CHAP_INVALID_COOKIE 0xFFEE
+ uint16_t cookie;
+};
+
struct dev_db_entry {
uint16_t options; /* 00-01 */
#define DDB_OPT_DISC_SESSION 0x10
#define DDB_OPT_TARGET 0x02 /* device is a target */
#define DDB_OPT_IPV6_DEVICE 0x100
+#define DDB_OPT_AUTO_SENDTGTS_DISABLE 0x40
#define DDB_OPT_IPV6_NULL_LINK_LOCAL 0x800 /* post connection */
#define DDB_OPT_IPV6_FW_DEFINED_LINK_LOCAL 0x800 /* pre connection */
@@ -591,6 +718,7 @@
uint16_t tcp_options; /* 0A-0B */
uint16_t ip_options; /* 0C-0D */
uint16_t iscsi_max_rcv_data_seg_len; /* 0E-0F */
+#define BYTE_UNITS 512
uint32_t res1; /* 10-13 */
uint16_t iscsi_max_snd_data_seg_len; /* 14-15 */
uint16_t iscsi_first_burst_len; /* 16-17 */
@@ -627,7 +755,10 @@
uint8_t tcp_rcv_wsf; /* 1C7 */
uint32_t stat_sn; /* 1C8-1CB */
uint32_t exp_stat_sn; /* 1CC-1CF */
- uint8_t res6[0x30]; /* 1D0-1FF */
+ uint8_t res6[0x2b]; /* 1D0-1FB */
+#define DDB_VALID_COOKIE 0x9034
+ uint16_t cookie; /* 1FC-1FD */
+ uint16_t len; /* 1FE-1FF */
};
/*************************************************************************/
@@ -639,6 +770,14 @@
#define FLASH_EOF_OFFSET (FLASH_DEFAULTBLOCKSIZE-8) /* 4 bytes
* for EOF
* signature */
+#define FLASH_RAW_ACCESS_ADDR 0x8e000000
+
+#define BOOT_PARAM_OFFSET_PORT0 0x3b0
+#define BOOT_PARAM_OFFSET_PORT1 0x7b0
+
+#define FLASH_OFFSET_DB_INFO 0x05000000
+#define FLASH_OFFSET_DB_END (FLASH_OFFSET_DB_INFO + 0x7fff)
+
struct sys_info_phys_addr {
uint8_t address[6]; /* 00-05 */
@@ -774,6 +913,7 @@
uint8_t entryStatus;
uint8_t systemDefined;
+#define SD_ISCSI_PDU 0x01
uint8_t entryCount;
/* SyetemDefined definition */
@@ -931,21 +1071,22 @@
struct qla4_header hdr; /* 00-03 */
uint32_t handle; /* 04-07 */
uint16_t target; /* 08-09 */
- uint16_t connectionID; /* 0A-0B */
+ uint16_t connection_id; /* 0A-0B */
#define ISNS_DEFAULT_SERVER_CONN_ID ((uint16_t)0x8000)
- uint16_t controlFlags; /* 0C-0D */
+ uint16_t control_flags; /* 0C-0D */
#define PT_FLAG_ETHERNET_FRAME 0x8000
#define PT_FLAG_ISNS_PDU 0x8000
#define PT_FLAG_SEND_BUFFER 0x0200
#define PT_FLAG_WAIT_4_RESPONSE 0x0100
+#define PT_FLAG_ISCSI_PDU 0x1000
uint16_t timeout; /* 0E-0F */
#define PT_DEFAULT_TIMEOUT 30 /* seconds */
- struct data_seg_a64 outDataSeg64; /* 10-1B */
+ struct data_seg_a64 out_dsd; /* 10-1B */
uint32_t res1; /* 1C-1F */
- struct data_seg_a64 inDataSeg64; /* 20-2B */
+ struct data_seg_a64 in_dsd; /* 20-2B */
uint8_t res2[20]; /* 2C-3F */
};
@@ -978,4 +1119,43 @@
#define RESPONSE_PROCESSED 0xDEADDEAD /* Signature */
};
+struct ql_iscsi_stats {
+ uint8_t reserved1[656]; /* 0000-028F */
+ uint32_t tx_cmd_pdu; /* 0290-0293 */
+ uint32_t tx_resp_pdu; /* 0294-0297 */
+ uint32_t rx_cmd_pdu; /* 0298-029B */
+ uint32_t rx_resp_pdu; /* 029C-029F */
+
+ uint64_t tx_data_octets; /* 02A0-02A7 */
+ uint64_t rx_data_octets; /* 02A8-02AF */
+
+ uint32_t hdr_digest_err; /* 02B0–02B3 */
+ uint32_t data_digest_err; /* 02B4–02B7 */
+ uint32_t conn_timeout_err; /* 02B8–02BB */
+ uint32_t framing_err; /* 02BC–02BF */
+
+ uint32_t tx_nopout_pdus; /* 02C0–02C3 */
+ uint32_t tx_scsi_cmd_pdus; /* 02C4–02C7 */
+ uint32_t tx_tmf_cmd_pdus; /* 02C8–02CB */
+ uint32_t tx_login_cmd_pdus; /* 02CC–02CF */
+ uint32_t tx_text_cmd_pdus; /* 02D0–02D3 */
+ uint32_t tx_scsi_write_pdus; /* 02D4–02D7 */
+ uint32_t tx_logout_cmd_pdus; /* 02D8–02DB */
+ uint32_t tx_snack_req_pdus; /* 02DC–02DF */
+
+ uint32_t rx_nopin_pdus; /* 02E0–02E3 */
+ uint32_t rx_scsi_resp_pdus; /* 02E4–02E7 */
+ uint32_t rx_tmf_resp_pdus; /* 02E8–02EB */
+ uint32_t rx_login_resp_pdus; /* 02EC–02EF */
+ uint32_t rx_text_resp_pdus; /* 02F0–02F3 */
+ uint32_t rx_scsi_read_pdus; /* 02F4–02F7 */
+ uint32_t rx_logout_resp_pdus; /* 02F8–02FB */
+
+ uint32_t rx_r2t_pdus; /* 02FC–02FF */
+ uint32_t rx_async_pdus; /* 0300–0303 */
+ uint32_t rx_reject_pdus; /* 0304–0307 */
+
+ uint8_t reserved2[264]; /* 0x0308 - 0x040F */
+};
+
#endif /* _QLA4X_FW_H */
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index a53a256..160db9d 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -12,20 +12,15 @@
int qla4xxx_hw_reset(struct scsi_qla_host *ha);
int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a);
-int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port);
int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb *srb);
-int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
- uint8_t renew_ddb_list);
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha);
int qla4xxx_soft_reset(struct scsi_qla_host *ha);
irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id);
-void qla4xxx_free_ddb_list(struct scsi_qla_host *ha);
void qla4xxx_free_ddb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry);
void qla4xxx_process_aen(struct scsi_qla_host *ha, uint8_t process_aen);
int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host *ha);
-int qla4xxx_relogin_device(struct scsi_qla_host *ha,
- struct ddb_entry *ddb_entry);
int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb);
int qla4xxx_reset_lun(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry,
int lun);
@@ -51,15 +46,24 @@
uint16_t *connection_id);
int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
- dma_addr_t fw_ddb_entry_dma);
-
-void qla4xxx_mark_device_missing(struct scsi_qla_host *ha,
- struct ddb_entry *ddb_entry);
+ dma_addr_t fw_ddb_entry_dma, uint32_t *mbx_sts);
+uint8_t qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
+ uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma);
+int qla4xxx_conn_close_sess_logout(struct scsi_qla_host *ha,
+ uint16_t fw_ddb_index,
+ uint16_t connection_id,
+ uint16_t option);
+int qla4xxx_disable_acb(struct scsi_qla_host *ha);
+int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
+ uint32_t *mbox_sts, dma_addr_t acb_dma);
+int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
+ uint32_t acb_type, uint32_t len);
+int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
+ uint32_t ip_idx, uint32_t *sts);
+void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session);
u16 rd_nvram_word(struct scsi_qla_host *ha, int offset);
+u8 rd_nvram_byte(struct scsi_qla_host *ha, int offset);
void qla4xxx_get_crash_record(struct scsi_qla_host *ha);
-struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha);
-int qla4xxx_add_sess(struct ddb_entry *);
-void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry);
int qla4xxx_is_nvram_configuration_valid(struct scsi_qla_host *ha);
int qla4xxx_about_firmware(struct scsi_qla_host *ha);
void qla4xxx_interrupt_service_routine(struct scsi_qla_host *ha,
@@ -68,14 +72,13 @@
void qla4xxx_srb_compl(struct kref *ref);
struct srb *qla4xxx_del_from_active_array(struct scsi_qla_host *ha,
uint32_t index);
-int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host *ha);
int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
uint32_t state, uint32_t conn_error);
void qla4xxx_dump_buffer(void *b, uint32_t size);
int qla4xxx_send_marker_iocb(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry, int lun, uint16_t mrkr_mod);
-int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err);
-
+int qla4xxx_set_flash(struct scsi_qla_host *ha, dma_addr_t dma_addr,
+ uint32_t offset, uint32_t length, uint32_t options);
int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
uint8_t outCount, uint32_t *mbx_cmd, uint32_t *mbx_sts);
@@ -95,6 +98,11 @@
void qla4xxx_get_conn_event_log(struct scsi_qla_host *ha);
void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha);
void qla4xxx_dump_registers(struct scsi_qla_host *ha);
+uint8_t qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
+ uint32_t *mbox_cmd,
+ uint32_t *mbox_sts,
+ struct addr_ctrl_blk *init_fw_cb,
+ dma_addr_t init_fw_cb_dma);
void qla4_8xxx_pci_config(struct scsi_qla_host *);
int qla4_8xxx_iospace_config(struct scsi_qla_host *ha);
@@ -134,6 +142,37 @@
void qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha);
void qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha);
void qla4_8xxx_set_drv_active(struct scsi_qla_host *ha);
+int qla4xxx_conn_open(struct scsi_qla_host *ha, uint16_t fw_ddb_index);
+int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry,
+ struct iscsi_cls_conn *cls_conn,
+ uint32_t *mbx_sts);
+int qla4xxx_session_logout_ddb(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry, int options);
+int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ uint32_t *mbx_sts);
+int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index);
+int qla4xxx_send_passthru0(struct iscsi_task *task);
+int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
+ uint16_t stats_size, dma_addr_t stats_dma);
+void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry);
+int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha,
+ struct dev_db_entry *fw_ddb_entry,
+ dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index);
+int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username,
+ char *password, uint16_t idx);
+int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
+ uint32_t offset, uint32_t size);
+int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
+ uint32_t offset, uint32_t size);
+int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
+ uint32_t region, uint32_t field0,
+ uint32_t field1);
+
+/* BSG Functions */
+int qla4xxx_bsg_request(struct bsg_job *bsg_job);
+int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job);
extern int ql4xextended_error_logging;
extern int ql4xdontresethba;
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 42ed5db..3075fba 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -11,9 +11,6 @@
#include "ql4_dbg.h"
#include "ql4_inline.h"
-static struct ddb_entry *qla4xxx_alloc_ddb(struct scsi_qla_host *ha,
- uint32_t fw_ddb_index);
-
static void ql4xxx_set_mac_number(struct scsi_qla_host *ha)
{
uint32_t value;
@@ -48,41 +45,15 @@
* @ha: pointer to host adapter structure.
* @ddb_entry: pointer to device database entry
*
- * This routine deallocates and unlinks the specified ddb_entry from the
- * adapter's
+ * This routine marks a DDB entry INVALID
**/
void qla4xxx_free_ddb(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry)
{
- /* Remove device entry from list */
- list_del_init(&ddb_entry->list);
-
/* Remove device pointer from index mapping arrays */
ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] =
(struct ddb_entry *) INVALID_ENTRY;
ha->tot_ddbs--;
-
- /* Free memory and scsi-ml struct for device entry */
- qla4xxx_destroy_sess(ddb_entry);
-}
-
-/**
- * qla4xxx_free_ddb_list - deallocate all ddbs
- * @ha: pointer to host adapter structure.
- *
- * This routine deallocates and removes all devices on the sppecified adapter.
- **/
-void qla4xxx_free_ddb_list(struct scsi_qla_host *ha)
-{
- struct list_head *ptr;
- struct ddb_entry *ddb_entry;
-
- while (!list_empty(&ha->ddb_list)) {
- ptr = ha->ddb_list.next;
- /* Free memory for device entry and remove */
- ddb_entry = list_entry(ptr, struct ddb_entry, list);
- qla4xxx_free_ddb(ha, ddb_entry);
- }
}
/**
@@ -236,38 +207,44 @@
FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) {
ipv4_wait = 1;
}
- if (((ha->ipv6_addl_options &
- IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) &&
- ((ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) ||
- (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) ||
- (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING))) {
+ if (((ha->ip_config.ipv6_addl_options &
+ IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) &&
+ ((ha->ip_config.ipv6_link_local_state ==
+ IP_ADDRSTATE_ACQUIRING) ||
+ (ha->ip_config.ipv6_addr0_state ==
+ IP_ADDRSTATE_ACQUIRING) ||
+ (ha->ip_config.ipv6_addr1_state ==
+ IP_ADDRSTATE_ACQUIRING))) {
ipv6_wait = 1;
- if ((ha->ipv6_link_local_state ==
- IP_ADDRSTATE_PREFERRED) ||
- (ha->ipv6_addr0_state == IP_ADDRSTATE_PREFERRED) ||
- (ha->ipv6_addr1_state == IP_ADDRSTATE_PREFERRED)) {
+ if ((ha->ip_config.ipv6_link_local_state ==
+ IP_ADDRSTATE_PREFERRED) ||
+ (ha->ip_config.ipv6_addr0_state ==
+ IP_ADDRSTATE_PREFERRED) ||
+ (ha->ip_config.ipv6_addr1_state ==
+ IP_ADDRSTATE_PREFERRED)) {
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
"Preferred IP configured."
" Don't wait!\n", ha->host_no,
__func__));
ipv6_wait = 0;
}
- if (memcmp(&ha->ipv6_default_router_addr, ip_address,
- IPv6_ADDR_LEN) == 0) {
+ if (memcmp(&ha->ip_config.ipv6_default_router_addr,
+ ip_address, IPv6_ADDR_LEN) == 0) {
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
"No Router configured. "
"Don't wait!\n", ha->host_no,
__func__));
ipv6_wait = 0;
}
- if ((ha->ipv6_default_router_state ==
- IPV6_RTRSTATE_MANUAL) &&
- (ha->ipv6_link_local_state ==
- IP_ADDRSTATE_TENTATIVE) &&
- (memcmp(&ha->ipv6_link_local_addr,
- &ha->ipv6_default_router_addr, 4) == 0)) {
+ if ((ha->ip_config.ipv6_default_router_state ==
+ IPV6_RTRSTATE_MANUAL) &&
+ (ha->ip_config.ipv6_link_local_state ==
+ IP_ADDRSTATE_TENTATIVE) &&
+ (memcmp(&ha->ip_config.ipv6_link_local_addr,
+ &ha->ip_config.ipv6_default_router_addr, 4) ==
+ 0)) {
DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "
"IP configured. Don't wait!\n",
ha->host_no, __func__));
@@ -279,11 +256,14 @@
"IP(s) \"", ha->host_no, __func__));
if (ipv4_wait)
DEBUG2(printk("IPv4 "));
- if (ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING)
+ if (ha->ip_config.ipv6_link_local_state ==
+ IP_ADDRSTATE_ACQUIRING)
DEBUG2(printk("IPv6LinkLocal "));
- if (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING)
+ if (ha->ip_config.ipv6_addr0_state ==
+ IP_ADDRSTATE_ACQUIRING)
DEBUG2(printk("IPv6Addr0 "));
- if (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING)
+ if (ha->ip_config.ipv6_addr1_state ==
+ IP_ADDRSTATE_ACQUIRING)
DEBUG2(printk("IPv6Addr1 "));
DEBUG2(printk("\"\n"));
}
@@ -466,486 +446,19 @@
return qla4xxx_get_firmware_status(ha);
}
-static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha,
- uint32_t fw_ddb_index,
- uint32_t *new_tgt)
+static void qla4xxx_set_model_info(struct scsi_qla_host *ha)
{
- struct dev_db_entry *fw_ddb_entry = NULL;
- dma_addr_t fw_ddb_entry_dma;
- struct ddb_entry *ddb_entry = NULL;
- int found = 0;
- uint32_t device_state;
+ uint16_t board_id_string[8];
+ int i;
+ int size = sizeof(ha->nvram->isp4022.boardIdStr);
+ int offset = offsetof(struct eeprom_data, isp4022.boardIdStr) / 2;
- *new_tgt = 0;
- /* Make sure the dma buffer is valid */
- fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
- sizeof(*fw_ddb_entry),
- &fw_ddb_entry_dma, GFP_KERNEL);
- if (fw_ddb_entry == NULL) {
- DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
- ha->host_no, __func__));
- goto exit_get_ddb_entry_no_free;
+ for (i = 0; i < (size / 2) ; i++) {
+ board_id_string[i] = rd_nvram_word(ha, offset);
+ offset += 1;
}
- if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
- fw_ddb_entry_dma, NULL, NULL,
- &device_state, NULL, NULL, NULL) ==
- QLA_ERROR) {
- DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for "
- "fw_ddb_index %d\n", ha->host_no, __func__,
- fw_ddb_index));
- goto exit_get_ddb_entry;
- }
-
- /* Allocate DDB if not already allocated. */
- DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no,
- __func__, fw_ddb_index));
- list_for_each_entry(ddb_entry, &ha->ddb_list, list) {
- if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
- ISCSI_NAME_SIZE) == 0) &&
- (ddb_entry->tpgt ==
- le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) &&
- (memcmp(ddb_entry->isid, fw_ddb_entry->isid,
- sizeof(ddb_entry->isid)) == 0)) {
- found++;
- break;
- }
- }
-
- /* if not found allocate new ddb */
- if (!found) {
- DEBUG2(printk("scsi%ld: %s: ddb[%d] not found - allocating "
- "new ddb\n", ha->host_no, __func__,
- fw_ddb_index));
- *new_tgt = 1;
- ddb_entry = qla4xxx_alloc_ddb(ha, fw_ddb_index);
- }
-
-exit_get_ddb_entry:
- dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry,
- fw_ddb_entry_dma);
-
-exit_get_ddb_entry_no_free:
- return ddb_entry;
-}
-
-/**
- * qla4xxx_update_ddb_entry - update driver's internal ddb
- * @ha: pointer to host adapter structure.
- * @ddb_entry: pointer to device database structure to be filled
- * @fw_ddb_index: index of the ddb entry in fw ddb table
- *
- * This routine updates the driver's internal device database entry
- * with information retrieved from the firmware's device database
- * entry for the specified device. The ddb_entry->fw_ddb_index field
- * must be initialized prior to calling this routine
- *
- **/
-static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
- struct ddb_entry *ddb_entry,
- uint32_t fw_ddb_index)
-{
- struct dev_db_entry *fw_ddb_entry = NULL;
- dma_addr_t fw_ddb_entry_dma;
- int status = QLA_ERROR;
- uint32_t conn_err;
-
- if (ddb_entry == NULL) {
- DEBUG2(printk("scsi%ld: %s: ddb_entry is NULL\n", ha->host_no,
- __func__));
-
- goto exit_update_ddb_no_free;
- }
-
- /* Make sure the dma buffer is valid */
- fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
- sizeof(*fw_ddb_entry),
- &fw_ddb_entry_dma, GFP_KERNEL);
- if (fw_ddb_entry == NULL) {
- DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
- ha->host_no, __func__));
-
- goto exit_update_ddb_no_free;
- }
-
- if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
- fw_ddb_entry_dma, NULL, NULL,
- &ddb_entry->fw_ddb_device_state, &conn_err,
- &ddb_entry->tcp_source_port_num,
- &ddb_entry->connection_id) ==
- QLA_ERROR) {
- DEBUG2(printk("scsi%ld: %s: failed get_ddb_entry for "
- "fw_ddb_index %d\n", ha->host_no, __func__,
- fw_ddb_index));
-
- goto exit_update_ddb;
- }
-
- status = QLA_SUCCESS;
- ddb_entry->options = le16_to_cpu(fw_ddb_entry->options);
- ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->tsid);
- ddb_entry->task_mgmt_timeout =
- le16_to_cpu(fw_ddb_entry->def_timeout);
- ddb_entry->CmdSn = 0;
- ddb_entry->exe_throttle = le16_to_cpu(fw_ddb_entry->exec_throttle);
- ddb_entry->default_relogin_timeout =
- le16_to_cpu(fw_ddb_entry->def_timeout);
- ddb_entry->default_time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait);
-
- /* Update index in case it changed */
- ddb_entry->fw_ddb_index = fw_ddb_index;
- ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry;
-
- ddb_entry->port = le16_to_cpu(fw_ddb_entry->port);
- ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
- memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid));
-
- memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0],
- min(sizeof(ddb_entry->iscsi_name),
- sizeof(fw_ddb_entry->iscsi_name)));
- memcpy(&ddb_entry->iscsi_alias[0], &fw_ddb_entry->iscsi_alias[0],
- min(sizeof(ddb_entry->iscsi_alias),
- sizeof(fw_ddb_entry->iscsi_alias)));
- memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ip_addr[0],
- min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ip_addr)));
-
- ddb_entry->iscsi_max_burst_len = fw_ddb_entry->iscsi_max_burst_len;
- ddb_entry->iscsi_max_outsnd_r2t = fw_ddb_entry->iscsi_max_outsnd_r2t;
- ddb_entry->iscsi_first_burst_len = fw_ddb_entry->iscsi_first_burst_len;
- ddb_entry->iscsi_max_rcv_data_seg_len =
- fw_ddb_entry->iscsi_max_rcv_data_seg_len;
- ddb_entry->iscsi_max_snd_data_seg_len =
- fw_ddb_entry->iscsi_max_snd_data_seg_len;
-
- if (ddb_entry->options & DDB_OPT_IPV6_DEVICE) {
- memcpy(&ddb_entry->remote_ipv6_addr,
- fw_ddb_entry->ip_addr,
- min(sizeof(ddb_entry->remote_ipv6_addr),
- sizeof(fw_ddb_entry->ip_addr)));
- memcpy(&ddb_entry->link_local_ipv6_addr,
- fw_ddb_entry->link_local_ipv6_addr,
- min(sizeof(ddb_entry->link_local_ipv6_addr),
- sizeof(fw_ddb_entry->link_local_ipv6_addr)));
-
- DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x"
- " ConnErr %08x IP %pI6 "
- ":%04d \"%s\"\n",
- __func__, fw_ddb_index,
- ddb_entry->fw_ddb_device_state,
- conn_err, fw_ddb_entry->ip_addr,
- le16_to_cpu(fw_ddb_entry->port),
- fw_ddb_entry->iscsi_name));
- } else
- DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x"
- " ConnErr %08x IP %pI4 "
- ":%04d \"%s\"\n",
- __func__, fw_ddb_index,
- ddb_entry->fw_ddb_device_state,
- conn_err, fw_ddb_entry->ip_addr,
- le16_to_cpu(fw_ddb_entry->port),
- fw_ddb_entry->iscsi_name));
-exit_update_ddb:
- if (fw_ddb_entry)
- dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
- fw_ddb_entry, fw_ddb_entry_dma);
-
-exit_update_ddb_no_free:
- return status;
-}
-
-/**
- * qla4xxx_alloc_ddb - allocate device database entry
- * @ha: Pointer to host adapter structure.
- * @fw_ddb_index: Firmware's device database index
- *
- * This routine allocates a ddb_entry, ititializes some values, and
- * inserts it into the ddb list.
- **/
-static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha,
- uint32_t fw_ddb_index)
-{
- struct ddb_entry *ddb_entry;
-
- DEBUG2(printk("scsi%ld: %s: fw_ddb_index [%d]\n", ha->host_no,
- __func__, fw_ddb_index));
-
- ddb_entry = qla4xxx_alloc_sess(ha);
- if (ddb_entry == NULL) {
- DEBUG2(printk("scsi%ld: %s: Unable to allocate memory "
- "to add fw_ddb_index [%d]\n",
- ha->host_no, __func__, fw_ddb_index));
- return ddb_entry;
- }
-
- ddb_entry->fw_ddb_index = fw_ddb_index;
- atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY);
- atomic_set(&ddb_entry->relogin_timer, 0);
- atomic_set(&ddb_entry->relogin_retry_count, 0);
- atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
- list_add_tail(&ddb_entry->list, &ha->ddb_list);
- ha->fw_ddb_index_map[fw_ddb_index] = ddb_entry;
- ha->tot_ddbs++;
-
- return ddb_entry;
-}
-
-/**
- * qla4_is_relogin_allowed - Are we allowed to login?
- * @ha: Pointer to host adapter structure.
- * @conn_err: Last connection error associated with the ddb
- *
- * This routine tests the given connection error to determine if
- * we are allowed to login.
- **/
-int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err)
-{
- uint32_t err_code, login_rsp_sts_class;
- int relogin = 1;
-
- err_code = ((conn_err & 0x00ff0000) >> 16);
- login_rsp_sts_class = ((conn_err & 0x0000ff00) >> 8);
- if (err_code == 0x1c || err_code == 0x06) {
- DEBUG2(ql4_printk(KERN_INFO, ha,
- ": conn_err=0x%08x, send target completed"
- " or access denied failure\n", conn_err));
- relogin = 0;
- }
- if ((err_code == 0x08) && (login_rsp_sts_class == 0x02)) {
- /* Login Response PDU returned an error.
- Login Response Status in Error Code Detail
- indicates login should not be retried.*/
- DEBUG2(ql4_printk(KERN_INFO, ha,
- ": conn_err=0x%08x, do not retry relogin\n",
- conn_err));
- relogin = 0;
- }
-
- return relogin;
-}
-
-static void qla4xxx_flush_AENS(struct scsi_qla_host *ha)
-{
- unsigned long wtime;
-
- /* Flush the 0x8014 AEN from the firmware as a result of
- * Auto connect. We are basically doing get_firmware_ddb()
- * to determine whether we need to log back in or not.
- * Trying to do a set ddb before we have processed 0x8014
- * will result in another set_ddb() for the same ddb. In other
- * words there will be stale entries in the aen_q.
- */
- wtime = jiffies + (2 * HZ);
- do {
- if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS)
- if (ha->firmware_state & (BIT_2 | BIT_0))
- return;
-
- if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags))
- qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
-
- msleep(1000);
- } while (!time_after_eq(jiffies, wtime));
-}
-
-/**
- * qla4xxx_build_ddb_list - builds driver ddb list
- * @ha: Pointer to host adapter structure.
- *
- * This routine searches for all valid firmware ddb entries and builds
- * an internal ddb list. Ddbs that are considered valid are those with
- * a device state of SESSION_ACTIVE.
- * A relogin (set_ddb) is issued for DDBs that are not online.
- **/
-static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
-{
- int status = QLA_ERROR;
- uint32_t fw_ddb_index = 0;
- uint32_t next_fw_ddb_index = 0;
- uint32_t ddb_state;
- uint32_t conn_err;
- struct ddb_entry *ddb_entry;
- struct dev_db_entry *fw_ddb_entry = NULL;
- dma_addr_t fw_ddb_entry_dma;
- uint32_t ipv6_device;
- uint32_t new_tgt;
-
- qla4xxx_flush_AENS(ha);
-
- fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
- &fw_ddb_entry_dma, GFP_KERNEL);
- if (fw_ddb_entry == NULL) {
- DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DMA alloc failed\n",
- __func__));
-
- goto exit_build_ddb_list_no_free;
- }
-
- ql4_printk(KERN_INFO, ha, "Initializing DDBs ...\n");
- for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES;
- fw_ddb_index = next_fw_ddb_index) {
- /* First, let's see if a device exists here */
- if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
- 0, NULL, &next_fw_ddb_index,
- &ddb_state, &conn_err,
- NULL, NULL) ==
- QLA_ERROR) {
- DEBUG2(printk("scsi%ld: %s: get_ddb_entry, "
- "fw_ddb_index %d failed", ha->host_no,
- __func__, fw_ddb_index));
- goto exit_build_ddb_list;
- }
-
- DEBUG2(printk("scsi%ld: %s: Getting DDB[%d] ddbstate=0x%x, "
- "next_fw_ddb_index=%d.\n", ha->host_no, __func__,
- fw_ddb_index, ddb_state, next_fw_ddb_index));
-
- /* Issue relogin, if necessary. */
- if (ddb_state == DDB_DS_SESSION_FAILED ||
- ddb_state == DDB_DS_NO_CONNECTION_ACTIVE) {
- /* Try and login to device */
- DEBUG2(printk("scsi%ld: %s: Login to DDB[%d]\n",
- ha->host_no, __func__, fw_ddb_index));
- ipv6_device = le16_to_cpu(fw_ddb_entry->options) &
- DDB_OPT_IPV6_DEVICE;
- if (qla4_is_relogin_allowed(ha, conn_err) &&
- ((!ipv6_device &&
- *((uint32_t *)fw_ddb_entry->ip_addr))
- || ipv6_device)) {
- qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0);
- if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index,
- NULL, 0, NULL,
- &next_fw_ddb_index,
- &ddb_state, &conn_err,
- NULL, NULL)
- == QLA_ERROR) {
- DEBUG2(printk("scsi%ld: %s:"
- "get_ddb_entry %d failed\n",
- ha->host_no,
- __func__, fw_ddb_index));
- goto exit_build_ddb_list;
- }
- }
- }
-
- if (ddb_state != DDB_DS_SESSION_ACTIVE)
- goto next_one;
- /*
- * if fw_ddb with session active state found,
- * add to ddb_list
- */
- DEBUG2(printk("scsi%ld: %s: DDB[%d] added to list\n",
- ha->host_no, __func__, fw_ddb_index));
-
- /* Add DDB to internal our ddb list. */
- ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index, &new_tgt);
- if (ddb_entry == NULL) {
- DEBUG2(printk("scsi%ld: %s: Unable to allocate memory "
- "for device at fw_ddb_index %d\n",
- ha->host_no, __func__, fw_ddb_index));
- goto exit_build_ddb_list;
- }
- /* Fill in the device structure */
- if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) ==
- QLA_ERROR) {
- ha->fw_ddb_index_map[fw_ddb_index] =
- (struct ddb_entry *)INVALID_ENTRY;
-
- DEBUG2(printk("scsi%ld: %s: update_ddb_entry failed "
- "for fw_ddb_index %d.\n",
- ha->host_no, __func__, fw_ddb_index));
- goto exit_build_ddb_list;
- }
-
-next_one:
- /* We know we've reached the last device when
- * next_fw_ddb_index is 0 */
- if (next_fw_ddb_index == 0)
- break;
- }
-
- status = QLA_SUCCESS;
- ql4_printk(KERN_INFO, ha, "DDB list done..\n");
-
-exit_build_ddb_list:
- dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry,
- fw_ddb_entry_dma);
-
-exit_build_ddb_list_no_free:
- return status;
-}
-
-static int qla4xxx_initialize_ddb_list(struct scsi_qla_host *ha)
-{
- uint16_t fw_ddb_index;
- int status = QLA_SUCCESS;
-
- /* free the ddb list if is not empty */
- if (!list_empty(&ha->ddb_list))
- qla4xxx_free_ddb_list(ha);
-
- for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; fw_ddb_index++)
- ha->fw_ddb_index_map[fw_ddb_index] =
- (struct ddb_entry *)INVALID_ENTRY;
-
- ha->tot_ddbs = 0;
-
- /* Perform device discovery and build ddb list. */
- status = qla4xxx_build_ddb_list(ha);
-
- return status;
-}
-
-/**
- * qla4xxx_reinitialize_ddb_list - update the driver ddb list
- * @ha: pointer to host adapter structure.
- *
- * This routine obtains device information from the F/W database after
- * firmware or adapter resets. The device table is preserved.
- **/
-int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host *ha)
-{
- int status = QLA_SUCCESS;
- struct ddb_entry *ddb_entry, *detemp;
-
- /* Update the device information for all devices. */
- list_for_each_entry_safe(ddb_entry, detemp, &ha->ddb_list, list) {
- qla4xxx_update_ddb_entry(ha, ddb_entry,
- ddb_entry->fw_ddb_index);
- if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
- atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
- DEBUG2(printk ("scsi%ld: %s: ddb index [%d] marked "
- "ONLINE\n", ha->host_no, __func__,
- ddb_entry->fw_ddb_index));
- iscsi_unblock_session(ddb_entry->sess);
- } else if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
- qla4xxx_mark_device_missing(ha, ddb_entry);
- }
- return status;
-}
-
-/**
- * qla4xxx_relogin_device - re-establish session
- * @ha: Pointer to host adapter structure.
- * @ddb_entry: Pointer to device database entry
- *
- * This routine does a session relogin with the specified device.
- * The ddb entry must be assigned prior to making this call.
- **/
-int qla4xxx_relogin_device(struct scsi_qla_host *ha,
- struct ddb_entry * ddb_entry)
-{
- uint16_t relogin_timer;
-
- relogin_timer = max(ddb_entry->default_relogin_timeout,
- (uint16_t)RELOGIN_TOV);
- atomic_set(&ddb_entry->relogin_timer, relogin_timer);
-
- DEBUG2(printk("scsi%ld: Relogin ddb [%d]. TOV=%d\n", ha->host_no,
- ddb_entry->fw_ddb_index, relogin_timer));
-
- qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, 0);
-
- return QLA_SUCCESS;
+ memcpy(ha->model_name, board_id_string, size);
}
static int qla4xxx_config_nvram(struct scsi_qla_host *ha)
@@ -983,6 +496,12 @@
else
return QLA_ERROR;
}
+
+ if (is_qla4022(ha) || is_qla4032(ha))
+ qla4xxx_set_model_info(ha);
+ else
+ strcpy(ha->model_name, "QLA4010");
+
DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n",
ha->host_no, __func__, extHwConfig.Asuint32_t));
@@ -1246,23 +765,56 @@
}
return status;
}
+/**
+ * qla4xxx_free_ddb_index - Free DDBs reserved by firmware
+ * @ha: pointer to adapter structure
+ *
+ * Since firmware is not running in autoconnect mode the DDB indices should
+ * be freed so that when login happens from user space there are free DDB
+ * indices available.
+ **/
+static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
+{
+ int max_ddbs;
+ int ret;
+ uint32_t idx = 0, next_idx = 0;
+ uint32_t state = 0, conn_err = 0;
+
+ max_ddbs = is_qla40XX(ha) ? MAX_PRST_DEV_DB_ENTRIES :
+ MAX_DEV_DB_ENTRIES;
+
+ for (idx = 0; idx < max_ddbs; idx = next_idx) {
+ ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL,
+ &next_idx, &state, &conn_err,
+ NULL, NULL);
+ if (ret == QLA_ERROR)
+ continue;
+ if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
+ state == DDB_DS_SESSION_FAILED) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Freeing DDB index = 0x%x\n", idx));
+ ret = qla4xxx_clear_ddb_entry(ha, idx);
+ if (ret == QLA_ERROR)
+ ql4_printk(KERN_ERR, ha,
+ "Unable to clear DDB index = "
+ "0x%x\n", idx);
+ }
+ if (next_idx == 0)
+ break;
+ }
+}
/**
* qla4xxx_initialize_adapter - initiailizes hba
* @ha: Pointer to host adapter structure.
- * @renew_ddb_list: Indicates what to do with the adapter's ddb list
- * after adapter recovery has completed.
- * 0=preserve ddb list, 1=destroy and rebuild ddb list
*
* This routine parforms all of the steps necessary to initialize the adapter.
*
**/
-int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
- uint8_t renew_ddb_list)
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha)
{
int status = QLA_ERROR;
- int8_t ip_address[IP_ADDR_LEN] = {0} ;
ha->eeprom_cmd_data = 0;
@@ -1288,47 +840,8 @@
if (status == QLA_ERROR)
goto exit_init_hba;
- /*
- * FW is waiting to get an IP address from DHCP server: Skip building
- * the ddb_list and wait for DHCP lease acquired aen to come in
- * followed by 0x8014 aen" to trigger the tgt discovery process.
- */
- if (ha->firmware_state & FW_STATE_CONFIGURING_IP)
- goto exit_init_online;
+ qla4xxx_free_ddb_index(ha);
- /* Skip device discovery if ip and subnet is zero */
- if (memcmp(ha->ip_address, ip_address, IP_ADDR_LEN) == 0 ||
- memcmp(ha->subnet_mask, ip_address, IP_ADDR_LEN) == 0)
- goto exit_init_online;
-
- if (renew_ddb_list == PRESERVE_DDB_LIST) {
- /*
- * We want to preserve lun states (i.e. suspended, etc.)
- * for recovery initiated by the driver. So just update
- * the device states for the existing ddb_list.
- */
- qla4xxx_reinitialize_ddb_list(ha);
- } else if (renew_ddb_list == REBUILD_DDB_LIST) {
- /*
- * We want to build the ddb_list from scratch during
- * driver initialization and recovery initiated by the
- * INT_HBA_RESET IOCTL.
- */
- status = qla4xxx_initialize_ddb_list(ha);
- if (status == QLA_ERROR) {
- DEBUG2(printk("%s(%ld) Error occurred during build"
- "ddb list\n", __func__, ha->host_no));
- goto exit_init_hba;
- }
-
- }
- if (!ha->tot_ddbs) {
- DEBUG2(printk("scsi%ld: Failed to initialize devices or none "
- "present in Firmware device database\n",
- ha->host_no));
- }
-
-exit_init_online:
set_bit(AF_ONLINE, &ha->flags);
exit_init_hba:
if (is_qla8022(ha) && (status == QLA_ERROR)) {
@@ -1343,61 +856,6 @@
}
/**
- * qla4xxx_add_device_dynamically - ddb addition due to an AEN
- * @ha: Pointer to host adapter structure.
- * @fw_ddb_index: Firmware's device database index
- *
- * This routine processes adds a device as a result of an 8014h AEN.
- **/
-static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha,
- uint32_t fw_ddb_index)
-{
- struct ddb_entry * ddb_entry;
- uint32_t new_tgt;
-
- /* First allocate a device structure */
- ddb_entry = qla4xxx_get_ddb_entry(ha, fw_ddb_index, &new_tgt);
- if (ddb_entry == NULL) {
- DEBUG2(printk(KERN_WARNING
- "scsi%ld: Unable to allocate memory to add "
- "fw_ddb_index %d\n", ha->host_no, fw_ddb_index));
- return;
- }
-
- if (!new_tgt && (ddb_entry->fw_ddb_index != fw_ddb_index)) {
- /* Target has been bound to a new fw_ddb_index */
- qla4xxx_free_ddb(ha, ddb_entry);
- ddb_entry = qla4xxx_alloc_ddb(ha, fw_ddb_index);
- if (ddb_entry == NULL) {
- DEBUG2(printk(KERN_WARNING
- "scsi%ld: Unable to allocate memory"
- " to add fw_ddb_index %d\n",
- ha->host_no, fw_ddb_index));
- return;
- }
- }
- if (qla4xxx_update_ddb_entry(ha, ddb_entry, fw_ddb_index) ==
- QLA_ERROR) {
- ha->fw_ddb_index_map[fw_ddb_index] =
- (struct ddb_entry *)INVALID_ENTRY;
- DEBUG2(printk(KERN_WARNING
- "scsi%ld: failed to add new device at index "
- "[%d]\n Unable to retrieve fw ddb entry\n",
- ha->host_no, fw_ddb_index));
- qla4xxx_free_ddb(ha, ddb_entry);
- return;
- }
-
- if (qla4xxx_add_sess(ddb_entry)) {
- DEBUG2(printk(KERN_WARNING
- "scsi%ld: failed to add new device at index "
- "[%d]\n Unable to add connection and session\n",
- ha->host_no, fw_ddb_index));
- qla4xxx_free_ddb(ha, ddb_entry);
- }
-}
-
-/**
* qla4xxx_process_ddb_changed - process ddb state change
* @ha - Pointer to host adapter structure.
* @fw_ddb_index - Firmware's device database index
@@ -1409,88 +867,94 @@
uint32_t state, uint32_t conn_err)
{
struct ddb_entry * ddb_entry;
+ uint32_t old_fw_ddb_device_state;
+ int status = QLA_ERROR;
/* check for out of range index */
if (fw_ddb_index >= MAX_DDB_ENTRIES)
- return QLA_ERROR;
+ goto exit_ddb_event;
/* Get the corresponging ddb entry */
ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
/* Device does not currently exist in our database. */
if (ddb_entry == NULL) {
- if (state == DDB_DS_SESSION_ACTIVE)
- qla4xxx_add_device_dynamically(ha, fw_ddb_index);
- return QLA_SUCCESS;
+ ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
+ __func__, fw_ddb_index);
+
+ if (state == DDB_DS_NO_CONNECTION_ACTIVE)
+ clear_bit(fw_ddb_index, ha->ddb_idx_map);
+
+ goto exit_ddb_event;
}
- /* Device already exists in our database. */
- DEBUG2(printk("scsi%ld: %s DDB - old state= 0x%x, new state=0x%x for "
- "index [%d]\n", ha->host_no, __func__,
- ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+ old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: DDB - old state = 0x%x, new state = 0x%x for "
+ "index [%d]\n", __func__,
+ ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
ddb_entry->fw_ddb_device_state = state;
- /* Device is back online. */
- if ((ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) &&
- (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)) {
- atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
- atomic_set(&ddb_entry->relogin_retry_count, 0);
- atomic_set(&ddb_entry->relogin_timer, 0);
- clear_bit(DF_RELOGIN, &ddb_entry->flags);
- iscsi_unblock_session(ddb_entry->sess);
- iscsi_session_event(ddb_entry->sess,
- ISCSI_KEVENT_CREATE_SESSION);
- /*
- * Change the lun state to READY in case the lun TIMEOUT before
- * the device came back.
- */
- } else if (ddb_entry->fw_ddb_device_state != DDB_DS_SESSION_ACTIVE) {
- /* Device went away, mark device missing */
- if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) {
- DEBUG2(ql4_printk(KERN_INFO, ha, "%s mark missing "
- "ddb_entry 0x%p sess 0x%p conn 0x%p\n",
- __func__, ddb_entry,
- ddb_entry->sess, ddb_entry->conn));
- qla4xxx_mark_device_missing(ha, ddb_entry);
- }
- /*
- * Relogin if device state changed to a not active state.
- * However, do not relogin if a RELOGIN is in process, or
- * we are not allowed to relogin to this DDB.
- */
- if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED &&
- !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
- qla4_is_relogin_allowed(ha, conn_err)) {
- /*
- * This triggers a relogin. After the relogin_timer
- * expires, the relogin gets scheduled. We must wait a
- * minimum amount of time since receiving an 0x8014 AEN
- * with failed device_state or a logout response before
- * we can issue another relogin.
- */
- /* Firmware pads this timeout: (time2wait +1).
- * Driver retry to login should be longer than F/W.
- * Otherwise F/W will fail
- * set_ddb() mbx cmd with 0x4005 since it still
- * counting down its time2wait.
- */
- atomic_set(&ddb_entry->relogin_timer, 0);
- atomic_set(&ddb_entry->retry_relogin_timer,
- ddb_entry->default_time2wait + 4);
- DEBUG(printk("scsi%ld: %s: ddb[%d] "
- "initiate relogin after %d seconds\n",
- ha->host_no, __func__,
- ddb_entry->fw_ddb_index,
- ddb_entry->default_time2wait + 4));
- } else {
- DEBUG(printk("scsi%ld: %s: ddb[%d] "
- "relogin not initiated, state = %d, "
- "ddb_entry->flags = 0x%lx\n",
- ha->host_no, __func__,
- ddb_entry->fw_ddb_index,
- ddb_entry->fw_ddb_device_state,
- ddb_entry->flags));
+ switch (old_fw_ddb_device_state) {
+ case DDB_DS_LOGIN_IN_PROCESS:
+ switch (state) {
+ case DDB_DS_SESSION_ACTIVE:
+ case DDB_DS_DISCOVERY:
+ iscsi_conn_start(ddb_entry->conn);
+ iscsi_conn_login_event(ddb_entry->conn,
+ ISCSI_CONN_STATE_LOGGED_IN);
+ qla4xxx_update_session_conn_param(ha, ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_SESSION_FAILED:
+ case DDB_DS_NO_CONNECTION_ACTIVE:
+ iscsi_conn_login_event(ddb_entry->conn,
+ ISCSI_CONN_STATE_FREE);
+ status = QLA_SUCCESS;
+ break;
}
+ break;
+ case DDB_DS_SESSION_ACTIVE:
+ switch (state) {
+ case DDB_DS_SESSION_FAILED:
+ /*
+ * iscsi_session failure will cause userspace to
+ * stop the connection which in turn would block the
+ * iscsi_session and start relogin
+ */
+ iscsi_session_failure(ddb_entry->sess->dd_data,
+ ISCSI_ERR_CONN_FAILED);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_NO_CONNECTION_ACTIVE:
+ clear_bit(fw_ddb_index, ha->ddb_idx_map);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ case DDB_DS_SESSION_FAILED:
+ switch (state) {
+ case DDB_DS_SESSION_ACTIVE:
+ case DDB_DS_DISCOVERY:
+ iscsi_conn_start(ddb_entry->conn);
+ iscsi_conn_login_event(ddb_entry->conn,
+ ISCSI_CONN_STATE_LOGGED_IN);
+ qla4xxx_update_session_conn_param(ha, ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_SESSION_FAILED:
+ iscsi_session_failure(ddb_entry->sess->dd_data,
+ ISCSI_ERR_CONN_FAILED);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ default:
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
+ __func__));
+ break;
}
- return QLA_SUCCESS;
+
+exit_ddb_event:
+ return status;
}
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index 75fcd82..4106693 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -313,10 +313,8 @@
cmd_entry->hdr.entryType = ET_COMMAND;
cmd_entry->handle = cpu_to_le32(index);
cmd_entry->target = cpu_to_le16(ddb_entry->fw_ddb_index);
- cmd_entry->connection_id = cpu_to_le16(ddb_entry->connection_id);
int_to_scsilun(cmd->device->lun, &cmd_entry->lun);
- cmd_entry->cmdSeqNum = cpu_to_le32(ddb_entry->CmdSn);
cmd_entry->ttlByteCnt = cpu_to_le32(scsi_bufflen(cmd));
memcpy(cmd_entry->cdb, cmd->cmnd, cmd->cmd_len);
cmd_entry->dataSegCnt = cpu_to_le16(tot_dsds);
@@ -381,3 +379,69 @@
return QLA_ERROR;
}
+int qla4xxx_send_passthru0(struct iscsi_task *task)
+{
+ struct passthru0 *passthru_iocb;
+ struct iscsi_session *sess = task->conn->session;
+ struct ddb_entry *ddb_entry = sess->dd_data;
+ struct scsi_qla_host *ha = ddb_entry->ha;
+ struct ql4_task_data *task_data = task->dd_data;
+ uint16_t ctrl_flags = 0;
+ unsigned long flags;
+ int ret = QLA_ERROR;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ task_data->iocb_req_cnt = 1;
+ /* Put the IOCB on the request queue */
+ if (!qla4xxx_space_in_req_ring(ha, task_data->iocb_req_cnt))
+ goto queuing_error;
+
+ passthru_iocb = (struct passthru0 *) ha->request_ptr;
+
+ memset(passthru_iocb, 0, sizeof(struct passthru0));
+ passthru_iocb->hdr.entryType = ET_PASSTHRU0;
+ passthru_iocb->hdr.systemDefined = SD_ISCSI_PDU;
+ passthru_iocb->hdr.entryCount = task_data->iocb_req_cnt;
+ passthru_iocb->handle = task->itt;
+ passthru_iocb->target = cpu_to_le16(ddb_entry->fw_ddb_index);
+ passthru_iocb->timeout = cpu_to_le16(PT_DEFAULT_TIMEOUT);
+
+ /* Setup the out & in DSDs */
+ if (task_data->req_len) {
+ memcpy((uint8_t *)task_data->req_buffer +
+ sizeof(struct iscsi_hdr), task->data, task->data_count);
+ ctrl_flags |= PT_FLAG_SEND_BUFFER;
+ passthru_iocb->out_dsd.base.addrLow =
+ cpu_to_le32(LSDW(task_data->req_dma));
+ passthru_iocb->out_dsd.base.addrHigh =
+ cpu_to_le32(MSDW(task_data->req_dma));
+ passthru_iocb->out_dsd.count =
+ cpu_to_le32(task->data_count +
+ sizeof(struct iscsi_hdr));
+ }
+ if (task_data->resp_len) {
+ passthru_iocb->in_dsd.base.addrLow =
+ cpu_to_le32(LSDW(task_data->resp_dma));
+ passthru_iocb->in_dsd.base.addrHigh =
+ cpu_to_le32(MSDW(task_data->resp_dma));
+ passthru_iocb->in_dsd.count =
+ cpu_to_le32(task_data->resp_len);
+ }
+
+ ctrl_flags |= (PT_FLAG_ISCSI_PDU | PT_FLAG_WAIT_4_RESPONSE);
+ passthru_iocb->control_flags = cpu_to_le16(ctrl_flags);
+
+ /* Update the request pointer */
+ qla4xxx_advance_req_ring_ptr(ha);
+ wmb();
+
+ /* Track IOCB used */
+ ha->iocb_cnt += task_data->iocb_req_cnt;
+ ha->req_q_count -= task_data->iocb_req_cnt;
+ ha->isp_ops->queue_iocb(ha);
+ ret = QLA_SUCCESS;
+
+queuing_error:
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ return ret;
+}
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 0e72921..827e930 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -224,8 +224,8 @@
* I/O to this device. We should get a ddb state change
* AEN soon.
*/
- if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
- qla4xxx_mark_device_missing(ha, ddb_entry);
+ if (iscsi_is_session_online(ddb_entry->sess))
+ qla4xxx_mark_device_missing(ddb_entry->sess);
break;
case SCS_DATA_UNDERRUN:
@@ -306,8 +306,8 @@
* send I/O to this device. We should get a ddb
* state change AEN soon.
*/
- if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
- qla4xxx_mark_device_missing(ha, ddb_entry);
+ if (iscsi_is_session_online(ddb_entry->sess))
+ qla4xxx_mark_device_missing(ddb_entry->sess);
cmd->result = DID_TRANSPORT_DISRUPTED << 16;
break;
@@ -341,6 +341,51 @@
}
/**
+ * qla4xxx_passthru_status_entry - processes passthru status IOCBs (0x3C)
+ * @ha: Pointer to host adapter structure.
+ * @sts_entry: Pointer to status entry structure.
+ **/
+static void qla4xxx_passthru_status_entry(struct scsi_qla_host *ha,
+ struct passthru_status *sts_entry)
+{
+ struct iscsi_task *task;
+ struct ddb_entry *ddb_entry;
+ struct ql4_task_data *task_data;
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_conn *conn;
+ itt_t itt;
+ uint32_t fw_ddb_index;
+
+ itt = sts_entry->handle;
+ fw_ddb_index = le32_to_cpu(sts_entry->target);
+
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
+
+ if (ddb_entry == NULL) {
+ ql4_printk(KERN_ERR, ha, "%s: Invalid target index = 0x%x\n",
+ __func__, sts_entry->target);
+ return;
+ }
+
+ cls_conn = ddb_entry->conn;
+ conn = cls_conn->dd_data;
+ spin_lock(&conn->session->lock);
+ task = iscsi_itt_to_task(conn, itt);
+ spin_unlock(&conn->session->lock);
+
+ if (task == NULL) {
+ ql4_printk(KERN_ERR, ha, "%s: Task is NULL\n", __func__);
+ return;
+ }
+
+ task_data = task->dd_data;
+ memcpy(&task_data->sts, sts_entry, sizeof(struct passthru_status));
+ ha->req_q_count += task_data->iocb_req_cnt;
+ ha->iocb_cnt -= task_data->iocb_req_cnt;
+ queue_work(ha->task_wq, &task_data->task_work);
+}
+
+/**
* qla4xxx_process_response_queue - process response queue completions
* @ha: Pointer to host adapter structure.
*
@@ -375,6 +420,14 @@
break;
case ET_PASSTHRU_STATUS:
+ if (sts_entry->hdr.systemDefined == SD_ISCSI_PDU)
+ qla4xxx_passthru_status_entry(ha,
+ (struct passthru_status *)sts_entry);
+ else
+ ql4_printk(KERN_ERR, ha,
+ "%s: Invalid status received\n",
+ __func__);
+
break;
case ET_STATUS_CONTINUATION:
@@ -566,6 +619,8 @@
else if ((mbox_sts[3] == ACB_STATE_ACQUIRING) &&
(mbox_sts[2] == ACB_STATE_VALID))
set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ else if ((mbox_sts[3] == ACB_STATE_UNCONFIGURED))
+ complete(&ha->disable_acb_comp);
break;
case MBOX_ASTS_MAC_ADDRESS_CHANGED:
@@ -1009,23 +1064,23 @@
switch (mbox_sts[0]) {
case MBOX_ASTS_DATABASE_CHANGED:
- if (process_aen == FLUSH_DDB_CHANGED_AENS) {
+ switch (process_aen) {
+ case FLUSH_DDB_CHANGED_AENS:
DEBUG2(printk("scsi%ld: AEN[%d] %04x, index "
"[%d] state=%04x FLUSHED!\n",
ha->host_no, ha->aen_out,
mbox_sts[0], mbox_sts[2],
mbox_sts[3]));
break;
+ case PROCESS_ALL_AENS:
+ default:
+ /* Specific device. */
+ if (mbox_sts[1] == 1)
+ qla4xxx_process_ddb_changed(ha,
+ mbox_sts[2], mbox_sts[3],
+ mbox_sts[4]);
+ break;
}
- case PROCESS_ALL_AENS:
- default:
- if (mbox_sts[1] == 0) { /* Global DB change. */
- qla4xxx_reinitialize_ddb_list(ha);
- } else if (mbox_sts[1] == 1) { /* Specific device. */
- qla4xxx_process_ddb_changed(ha, mbox_sts[2],
- mbox_sts[3], mbox_sts[4]);
- }
- break;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
}
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index fce8289..4c2b848 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -303,7 +303,7 @@
return QLA_SUCCESS;
}
-static uint8_t
+uint8_t
qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
{
@@ -327,43 +327,69 @@
static void
qla4xxx_update_local_ip(struct scsi_qla_host *ha,
- struct addr_ctrl_blk *init_fw_cb)
+ struct addr_ctrl_blk *init_fw_cb)
{
+ ha->ip_config.tcp_options = le16_to_cpu(init_fw_cb->ipv4_tcp_opts);
+ ha->ip_config.ipv4_options = le16_to_cpu(init_fw_cb->ipv4_ip_opts);
+ ha->ip_config.ipv4_addr_state =
+ le16_to_cpu(init_fw_cb->ipv4_addr_state);
+ ha->ip_config.eth_mtu_size =
+ le16_to_cpu(init_fw_cb->eth_mtu_size);
+ ha->ip_config.ipv4_port = le16_to_cpu(init_fw_cb->ipv4_port);
+
+ if (ha->acb_version == ACB_SUPPORTED) {
+ ha->ip_config.ipv6_options = le16_to_cpu(init_fw_cb->ipv6_opts);
+ ha->ip_config.ipv6_addl_options =
+ le16_to_cpu(init_fw_cb->ipv6_addtl_opts);
+ }
+
/* Save IPv4 Address Info */
- memcpy(ha->ip_address, init_fw_cb->ipv4_addr,
- min(sizeof(ha->ip_address), sizeof(init_fw_cb->ipv4_addr)));
- memcpy(ha->subnet_mask, init_fw_cb->ipv4_subnet,
- min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->ipv4_subnet)));
- memcpy(ha->gateway, init_fw_cb->ipv4_gw_addr,
- min(sizeof(ha->gateway), sizeof(init_fw_cb->ipv4_gw_addr)));
+ memcpy(ha->ip_config.ip_address, init_fw_cb->ipv4_addr,
+ min(sizeof(ha->ip_config.ip_address),
+ sizeof(init_fw_cb->ipv4_addr)));
+ memcpy(ha->ip_config.subnet_mask, init_fw_cb->ipv4_subnet,
+ min(sizeof(ha->ip_config.subnet_mask),
+ sizeof(init_fw_cb->ipv4_subnet)));
+ memcpy(ha->ip_config.gateway, init_fw_cb->ipv4_gw_addr,
+ min(sizeof(ha->ip_config.gateway),
+ sizeof(init_fw_cb->ipv4_gw_addr)));
+
+ ha->ip_config.ipv4_vlan_tag = be16_to_cpu(init_fw_cb->ipv4_vlan_tag);
if (is_ipv6_enabled(ha)) {
/* Save IPv6 Address */
- ha->ipv6_link_local_state = init_fw_cb->ipv6_lnk_lcl_addr_state;
- ha->ipv6_addr0_state = init_fw_cb->ipv6_addr0_state;
- ha->ipv6_addr1_state = init_fw_cb->ipv6_addr1_state;
- ha->ipv6_default_router_state = init_fw_cb->ipv6_dflt_rtr_state;
- ha->ipv6_link_local_addr.in6_u.u6_addr8[0] = 0xFE;
- ha->ipv6_link_local_addr.in6_u.u6_addr8[1] = 0x80;
+ ha->ip_config.ipv6_link_local_state =
+ le16_to_cpu(init_fw_cb->ipv6_lnk_lcl_addr_state);
+ ha->ip_config.ipv6_addr0_state =
+ le16_to_cpu(init_fw_cb->ipv6_addr0_state);
+ ha->ip_config.ipv6_addr1_state =
+ le16_to_cpu(init_fw_cb->ipv6_addr1_state);
+ ha->ip_config.ipv6_default_router_state =
+ le16_to_cpu(init_fw_cb->ipv6_dflt_rtr_state);
+ ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[0] = 0xFE;
+ ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[1] = 0x80;
- memcpy(&ha->ipv6_link_local_addr.in6_u.u6_addr8[8],
- init_fw_cb->ipv6_if_id,
- min(sizeof(ha->ipv6_link_local_addr)/2,
- sizeof(init_fw_cb->ipv6_if_id)));
- memcpy(&ha->ipv6_addr0, init_fw_cb->ipv6_addr0,
- min(sizeof(ha->ipv6_addr0),
- sizeof(init_fw_cb->ipv6_addr0)));
- memcpy(&ha->ipv6_addr1, init_fw_cb->ipv6_addr1,
- min(sizeof(ha->ipv6_addr1),
- sizeof(init_fw_cb->ipv6_addr1)));
- memcpy(&ha->ipv6_default_router_addr,
- init_fw_cb->ipv6_dflt_rtr_addr,
- min(sizeof(ha->ipv6_default_router_addr),
- sizeof(init_fw_cb->ipv6_dflt_rtr_addr)));
+ memcpy(&ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[8],
+ init_fw_cb->ipv6_if_id,
+ min(sizeof(ha->ip_config.ipv6_link_local_addr)/2,
+ sizeof(init_fw_cb->ipv6_if_id)));
+ memcpy(&ha->ip_config.ipv6_addr0, init_fw_cb->ipv6_addr0,
+ min(sizeof(ha->ip_config.ipv6_addr0),
+ sizeof(init_fw_cb->ipv6_addr0)));
+ memcpy(&ha->ip_config.ipv6_addr1, init_fw_cb->ipv6_addr1,
+ min(sizeof(ha->ip_config.ipv6_addr1),
+ sizeof(init_fw_cb->ipv6_addr1)));
+ memcpy(&ha->ip_config.ipv6_default_router_addr,
+ init_fw_cb->ipv6_dflt_rtr_addr,
+ min(sizeof(ha->ip_config.ipv6_default_router_addr),
+ sizeof(init_fw_cb->ipv6_dflt_rtr_addr)));
+ ha->ip_config.ipv6_vlan_tag =
+ be16_to_cpu(init_fw_cb->ipv6_vlan_tag);
+ ha->ip_config.ipv6_port = le16_to_cpu(init_fw_cb->ipv6_port);
}
}
-static uint8_t
+uint8_t
qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
uint32_t *mbox_cmd,
uint32_t *mbox_sts,
@@ -383,9 +409,6 @@
/* Save some info in adapter structure. */
ha->acb_version = init_fw_cb->acb_version;
ha->firmware_options = le16_to_cpu(init_fw_cb->fw_options);
- ha->tcp_options = le16_to_cpu(init_fw_cb->ipv4_tcp_opts);
- ha->ipv4_options = le16_to_cpu(init_fw_cb->ipv4_ip_opts);
- ha->ipv4_addr_state = le16_to_cpu(init_fw_cb->ipv4_addr_state);
ha->heartbeat_interval = init_fw_cb->hb_interval;
memcpy(ha->name_string, init_fw_cb->iscsi_name,
min(sizeof(ha->name_string),
@@ -393,10 +416,6 @@
/*memcpy(ha->alias, init_fw_cb->Alias,
min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
- if (ha->acb_version == ACB_SUPPORTED) {
- ha->ipv6_options = init_fw_cb->ipv6_opts;
- ha->ipv6_addl_options = init_fw_cb->ipv6_addtl_opts;
- }
qla4xxx_update_local_ip(ha, init_fw_cb);
return QLA_SUCCESS;
@@ -462,10 +481,11 @@
init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
- /* Set bit for "serialize task mgmt" all other bits need to be zero */
init_fw_cb->add_fw_options = 0;
init_fw_cb->add_fw_options |=
- __constant_cpu_to_le16(SERIALIZE_TASK_MGMT);
+ __constant_cpu_to_le16(ADFWOPT_SERIALIZE_TASK_MGMT);
+ init_fw_cb->add_fw_options |=
+ __constant_cpu_to_le16(ADFWOPT_AUTOCONN_DISABLE);
if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)
!= QLA_SUCCESS) {
@@ -691,19 +711,38 @@
return status;
}
+int qla4xxx_conn_open(struct scsi_qla_host *ha, uint16_t fw_ddb_index)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status;
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_CONN_OPEN;
+ mbox_cmd[1] = fw_ddb_index;
+
+ status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
+ &mbox_sts[0]);
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: status = %d mbx0 = 0x%x mbx1 = 0x%x\n",
+ __func__, status, mbox_sts[0], mbox_sts[1]));
+ return status;
+}
+
/**
* qla4xxx_set_fwddb_entry - sets a ddb entry.
* @ha: Pointer to host adapter structure.
* @fw_ddb_index: Firmware's device database index
- * @fw_ddb_entry: Pointer to firmware's ddb entry structure, or NULL.
+ * @fw_ddb_entry_dma: dma address of ddb entry
+ * @mbx_sts: mailbox 0 to be returned or NULL
*
* This routine initializes or updates the adapter's device database
- * entry for the specified device. It also triggers a login for the
- * specified device. Therefore, it may also be used as a secondary
- * login routine when a NULL pointer is specified for the fw_ddb_entry.
+ * entry for the specified device.
**/
int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
- dma_addr_t fw_ddb_entry_dma)
+ dma_addr_t fw_ddb_entry_dma, uint32_t *mbx_sts)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
@@ -722,13 +761,41 @@
mbox_cmd[4] = sizeof(struct dev_db_entry);
status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0],
- &mbox_sts[0]);
+ &mbox_sts[0]);
+ if (mbx_sts)
+ *mbx_sts = mbox_sts[0];
DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n",
ha->host_no, __func__, status, mbox_sts[0], mbox_sts[4]);)
return status;
}
+int qla4xxx_session_logout_ddb(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry, int options)
+{
+ int status;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
+ mbox_cmd[1] = ddb_entry->fw_ddb_index;
+ mbox_cmd[3] = options;
+
+ status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: MBOX_CMD_CONN_CLOSE_SESS_LOGOUT "
+ "failed sts %04X %04X", __func__,
+ mbox_sts[0], mbox_sts[1]));
+ }
+
+ return status;
+}
+
/**
* qla4xxx_get_crash_record - retrieves crash record.
* @ha: Pointer to host adapter structure.
@@ -805,7 +872,6 @@
uint32_t max_event_log_entries;
uint8_t i;
-
memset(&mbox_cmd, 0, sizeof(mbox_cmd));
memset(&mbox_sts, 0, sizeof(mbox_cmd));
@@ -1104,7 +1170,7 @@
return status;
}
-static int qla4xxx_get_default_ddb(struct scsi_qla_host *ha,
+static int qla4xxx_get_default_ddb(struct scsi_qla_host *ha, uint32_t options,
dma_addr_t dma_addr)
{
uint32_t mbox_cmd[MBOX_REG_COUNT];
@@ -1114,6 +1180,7 @@
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS;
+ mbox_cmd[1] = options;
mbox_cmd[2] = LSDW(dma_addr);
mbox_cmd[3] = MSDW(dma_addr);
@@ -1126,8 +1193,10 @@
return QLA_SUCCESS;
}
-static int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t *ddb_index)
+int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index,
+ uint32_t *mbx_sts)
{
+ int status;
uint32_t mbox_cmd[MBOX_REG_COUNT];
uint32_t mbox_sts[MBOX_REG_COUNT];
@@ -1135,75 +1204,646 @@
memset(&mbox_sts, 0, sizeof(mbox_sts));
mbox_cmd[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY;
- mbox_cmd[1] = MAX_PRST_DEV_DB_ENTRIES;
+ mbox_cmd[1] = ddb_index;
- if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) !=
- QLA_SUCCESS) {
- if (mbox_sts[0] == MBOX_STS_COMMAND_ERROR) {
- *ddb_index = mbox_sts[2];
- } else {
- DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
- ha->host_no, __func__, mbox_sts[0]));
- return QLA_ERROR;
- }
- } else {
- *ddb_index = MAX_PRST_DEV_DB_ENTRIES;
+ status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
+ __func__, mbox_sts[0]));
}
- return QLA_SUCCESS;
+ *mbx_sts = mbox_sts[0];
+ return status;
}
+int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index)
+{
+ int status;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
-int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port)
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_CLEAR_DATABASE_ENTRY;
+ mbox_cmd[1] = ddb_index;
+
+ status = qla4xxx_mailbox_command(ha, 2, 1, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
+ __func__, mbox_sts[0]));
+ }
+
+ return status;
+}
+
+int qla4xxx_set_flash(struct scsi_qla_host *ha, dma_addr_t dma_addr,
+ uint32_t offset, uint32_t length, uint32_t options)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_SUCCESS;
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_WRITE_FLASH;
+ mbox_cmd[1] = LSDW(dma_addr);
+ mbox_cmd[2] = MSDW(dma_addr);
+ mbox_cmd[3] = offset;
+ mbox_cmd[4] = length;
+ mbox_cmd[5] = options;
+
+ status = qla4xxx_mailbox_command(ha, 6, 2, &mbox_cmd[0], &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_WRITE_FLASH "
+ "failed w/ status %04X, mbx1 %04X\n",
+ __func__, mbox_sts[0], mbox_sts[1]));
+ }
+ return status;
+}
+
+int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha,
+ struct dev_db_entry *fw_ddb_entry,
+ dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index)
+{
+ uint32_t dev_db_start_offset = FLASH_OFFSET_DB_INFO;
+ uint32_t dev_db_end_offset;
+ int status = QLA_ERROR;
+
+ memset(fw_ddb_entry, 0, sizeof(*fw_ddb_entry));
+
+ dev_db_start_offset += (ddb_index * sizeof(*fw_ddb_entry));
+ dev_db_end_offset = FLASH_OFFSET_DB_END;
+
+ if (dev_db_start_offset > dev_db_end_offset) {
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "%s:Invalid DDB index %d", __func__,
+ ddb_index));
+ goto exit_bootdb_failed;
+ }
+
+ if (qla4xxx_get_flash(ha, fw_ddb_entry_dma, dev_db_start_offset,
+ sizeof(*fw_ddb_entry)) != QLA_SUCCESS) {
+ ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
+ "failed\n", ha->host_no, __func__);
+ goto exit_bootdb_failed;
+ }
+
+ if (fw_ddb_entry->cookie == DDB_VALID_COOKIE)
+ status = QLA_SUCCESS;
+
+exit_bootdb_failed:
+ return status;
+}
+
+int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password,
+ uint16_t idx)
+{
+ int ret = 0;
+ int rval = QLA_ERROR;
+ uint32_t offset = 0, chap_size;
+ struct ql4_chap_table *chap_table;
+ dma_addr_t chap_dma;
+
+ chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
+ if (chap_table == NULL) {
+ ret = -ENOMEM;
+ goto exit_get_chap;
+ }
+
+ chap_size = sizeof(struct ql4_chap_table);
+ memset(chap_table, 0, chap_size);
+
+ if (is_qla40XX(ha))
+ offset = FLASH_CHAP_OFFSET | (idx * chap_size);
+ else {
+ offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2);
+ /* flt_chap_size is CHAP table size for both ports
+ * so divide it by 2 to calculate the offset for second port
+ */
+ if (ha->port_num == 1)
+ offset += (ha->hw.flt_chap_size / 2);
+ offset += (idx * chap_size);
+ }
+
+ rval = qla4xxx_get_flash(ha, chap_dma, offset, chap_size);
+ if (rval != QLA_SUCCESS) {
+ ret = -EINVAL;
+ goto exit_get_chap;
+ }
+
+ DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n",
+ __le16_to_cpu(chap_table->cookie)));
+
+ if (__le16_to_cpu(chap_table->cookie) != CHAP_VALID_COOKIE) {
+ ql4_printk(KERN_ERR, ha, "No valid chap entry found\n");
+ goto exit_get_chap;
+ }
+
+ strncpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
+ strncpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
+ chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE);
+
+exit_get_chap:
+ dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma);
+ return ret;
+}
+
+static int qla4xxx_set_chap(struct scsi_qla_host *ha, char *username,
+ char *password, uint16_t idx, int bidi)
+{
+ int ret = 0;
+ int rval = QLA_ERROR;
+ uint32_t offset = 0;
+ struct ql4_chap_table *chap_table;
+ dma_addr_t chap_dma;
+
+ chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma);
+ if (chap_table == NULL) {
+ ret = -ENOMEM;
+ goto exit_set_chap;
+ }
+
+ memset(chap_table, 0, sizeof(struct ql4_chap_table));
+ if (bidi)
+ chap_table->flags |= BIT_6; /* peer */
+ else
+ chap_table->flags |= BIT_7; /* local */
+ chap_table->secret_len = strlen(password);
+ strncpy(chap_table->secret, password, MAX_CHAP_SECRET_LEN);
+ strncpy(chap_table->name, username, MAX_CHAP_NAME_LEN);
+ chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE);
+ offset = FLASH_CHAP_OFFSET | (idx * sizeof(struct ql4_chap_table));
+ rval = qla4xxx_set_flash(ha, chap_dma, offset,
+ sizeof(struct ql4_chap_table),
+ FLASH_OPT_RMW_COMMIT);
+
+ if (rval == QLA_SUCCESS && ha->chap_list) {
+ /* Update ha chap_list cache */
+ memcpy((struct ql4_chap_table *)ha->chap_list + idx,
+ chap_table, sizeof(struct ql4_chap_table));
+ }
+ dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma);
+ if (rval != QLA_SUCCESS)
+ ret = -EINVAL;
+
+exit_set_chap:
+ return ret;
+}
+
+/**
+ * qla4xxx_get_chap_index - Get chap index given username and secret
+ * @ha: pointer to adapter structure
+ * @username: CHAP username to be searched
+ * @password: CHAP password to be searched
+ * @bidi: Is this a BIDI CHAP
+ * @chap_index: CHAP index to be returned
+ *
+ * Match the username and password in the chap_list, return the index if a
+ * match is found. If a match is not found then add the entry in FLASH and
+ * return the index at which entry is written in the FLASH.
+ **/
+static int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username,
+ char *password, int bidi, uint16_t *chap_index)
+{
+ int i, rval;
+ int free_index = -1;
+ int found_index = 0;
+ int max_chap_entries = 0;
+ struct ql4_chap_table *chap_table;
+
+ if (is_qla8022(ha))
+ max_chap_entries = (ha->hw.flt_chap_size / 2) /
+ sizeof(struct ql4_chap_table);
+ else
+ max_chap_entries = MAX_CHAP_ENTRIES_40XX;
+
+ if (!ha->chap_list) {
+ ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n");
+ return QLA_ERROR;
+ }
+
+ mutex_lock(&ha->chap_sem);
+ for (i = 0; i < max_chap_entries; i++) {
+ chap_table = (struct ql4_chap_table *)ha->chap_list + i;
+ if (chap_table->cookie !=
+ __constant_cpu_to_le16(CHAP_VALID_COOKIE)) {
+ if (i > MAX_RESRV_CHAP_IDX && free_index == -1)
+ free_index = i;
+ continue;
+ }
+ if (bidi) {
+ if (chap_table->flags & BIT_7)
+ continue;
+ } else {
+ if (chap_table->flags & BIT_6)
+ continue;
+ }
+ if (!strncmp(chap_table->secret, password,
+ MAX_CHAP_SECRET_LEN) &&
+ !strncmp(chap_table->name, username,
+ MAX_CHAP_NAME_LEN)) {
+ *chap_index = i;
+ found_index = 1;
+ break;
+ }
+ }
+
+ /* If chap entry is not present and a free index is available then
+ * write the entry in flash
+ */
+ if (!found_index && free_index != -1) {
+ rval = qla4xxx_set_chap(ha, username, password,
+ free_index, bidi);
+ if (!rval) {
+ *chap_index = free_index;
+ found_index = 1;
+ }
+ }
+
+ mutex_unlock(&ha->chap_sem);
+
+ if (found_index)
+ return QLA_SUCCESS;
+ return QLA_ERROR;
+}
+
+int qla4xxx_conn_close_sess_logout(struct scsi_qla_host *ha,
+ uint16_t fw_ddb_index,
+ uint16_t connection_id,
+ uint16_t option)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_SUCCESS;
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT;
+ mbox_cmd[1] = fw_ddb_index;
+ mbox_cmd[2] = connection_id;
+ mbox_cmd[3] = option;
+
+ status = qla4xxx_mailbox_command(ha, 4, 2, &mbox_cmd[0], &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_CONN_CLOSE "
+ "option %04x failed w/ status %04X %04X\n",
+ __func__, option, mbox_sts[0], mbox_sts[1]));
+ }
+ return status;
+}
+
+int qla4xxx_disable_acb(struct scsi_qla_host *ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_SUCCESS;
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_DISABLE_ACB;
+
+ status = qla4xxx_mailbox_command(ha, 8, 5, &mbox_cmd[0], &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_DISABLE_ACB "
+ "failed w/ status %04X %04X %04X", __func__,
+ mbox_sts[0], mbox_sts[1], mbox_sts[2]));
+ }
+ return status;
+}
+
+int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
+ uint32_t acb_type, uint32_t len)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_SUCCESS;
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_GET_ACB;
+ mbox_cmd[1] = acb_type;
+ mbox_cmd[2] = LSDW(acb_dma);
+ mbox_cmd[3] = MSDW(acb_dma);
+ mbox_cmd[4] = len;
+
+ status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_GET_ACB "
+ "failed w/ status %04X\n", __func__,
+ mbox_sts[0]));
+ }
+ return status;
+}
+
+int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
+ uint32_t *mbox_sts, dma_addr_t acb_dma)
+{
+ int status = QLA_SUCCESS;
+
+ memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
+ memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+ mbox_cmd[0] = MBOX_CMD_SET_ACB;
+ mbox_cmd[1] = 0; /* Primary ACB */
+ mbox_cmd[2] = LSDW(acb_dma);
+ mbox_cmd[3] = MSDW(acb_dma);
+ mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
+
+ status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_SET_ACB "
+ "failed w/ status %04X\n", __func__,
+ mbox_sts[0]));
+ }
+ return status;
+}
+
+int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry,
+ struct iscsi_cls_conn *cls_conn,
+ uint32_t *mbx_sts)
{
struct dev_db_entry *fw_ddb_entry;
+ struct iscsi_conn *conn;
+ struct iscsi_session *sess;
+ struct qla_conn *qla_conn;
+ struct sockaddr *dst_addr;
dma_addr_t fw_ddb_entry_dma;
- uint32_t ddb_index;
- int ret_val = QLA_SUCCESS;
+ int status = QLA_SUCCESS;
+ int rval = 0;
+ struct sockaddr_in *addr;
+ struct sockaddr_in6 *addr6;
+ char *ip;
+ uint16_t iscsi_opts = 0;
+ uint32_t options = 0;
+ uint16_t idx;
-
- fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
- sizeof(*fw_ddb_entry),
+ fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (!fw_ddb_entry) {
- DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
- ha->host_no, __func__));
- ret_val = QLA_ERROR;
- goto exit_send_tgts_no_free;
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "%s: Unable to allocate dma buffer.\n",
+ __func__));
+ rval = -ENOMEM;
+ goto exit_set_param_no_free;
}
- ret_val = qla4xxx_get_default_ddb(ha, fw_ddb_entry_dma);
- if (ret_val != QLA_SUCCESS)
- goto exit_send_tgts;
+ conn = cls_conn->dd_data;
+ qla_conn = conn->dd_data;
+ sess = conn->session;
+ dst_addr = &qla_conn->qla_ep->dst_addr;
- ret_val = qla4xxx_req_ddb_entry(ha, &ddb_index);
- if (ret_val != QLA_SUCCESS)
- goto exit_send_tgts;
+ if (dst_addr->sa_family == AF_INET6)
+ options |= IPV6_DEFAULT_DDB_ENTRY;
- memset(fw_ddb_entry->iscsi_alias, 0,
- sizeof(fw_ddb_entry->iscsi_alias));
+ status = qla4xxx_get_default_ddb(ha, options, fw_ddb_entry_dma);
+ if (status == QLA_ERROR) {
+ rval = -EINVAL;
+ goto exit_set_param;
+ }
- memset(fw_ddb_entry->iscsi_name, 0,
- sizeof(fw_ddb_entry->iscsi_name));
+ iscsi_opts = le16_to_cpu(fw_ddb_entry->iscsi_options);
+ memset(fw_ddb_entry->iscsi_alias, 0, sizeof(fw_ddb_entry->iscsi_alias));
+
+ memset(fw_ddb_entry->iscsi_name, 0, sizeof(fw_ddb_entry->iscsi_name));
+
+ if (sess->targetname != NULL) {
+ memcpy(fw_ddb_entry->iscsi_name, sess->targetname,
+ min(strlen(sess->targetname),
+ sizeof(fw_ddb_entry->iscsi_name)));
+ }
memset(fw_ddb_entry->ip_addr, 0, sizeof(fw_ddb_entry->ip_addr));
- memset(fw_ddb_entry->tgt_addr, 0,
- sizeof(fw_ddb_entry->tgt_addr));
+ memset(fw_ddb_entry->tgt_addr, 0, sizeof(fw_ddb_entry->tgt_addr));
- fw_ddb_entry->options = (DDB_OPT_DISC_SESSION | DDB_OPT_TARGET);
- fw_ddb_entry->port = cpu_to_le16(ntohs(port));
+ fw_ddb_entry->options = DDB_OPT_TARGET | DDB_OPT_AUTO_SENDTGTS_DISABLE;
- fw_ddb_entry->ip_addr[0] = *ip;
- fw_ddb_entry->ip_addr[1] = *(ip + 1);
- fw_ddb_entry->ip_addr[2] = *(ip + 2);
- fw_ddb_entry->ip_addr[3] = *(ip + 3);
+ if (dst_addr->sa_family == AF_INET) {
+ addr = (struct sockaddr_in *)dst_addr;
+ ip = (char *)&addr->sin_addr;
+ memcpy(fw_ddb_entry->ip_addr, ip, IP_ADDR_LEN);
+ fw_ddb_entry->port = cpu_to_le16(ntohs(addr->sin_port));
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: Destination Address [%pI4]: index [%d]\n",
+ __func__, fw_ddb_entry->ip_addr,
+ ddb_entry->fw_ddb_index));
+ } else if (dst_addr->sa_family == AF_INET6) {
+ addr6 = (struct sockaddr_in6 *)dst_addr;
+ ip = (char *)&addr6->sin6_addr;
+ memcpy(fw_ddb_entry->ip_addr, ip, IPv6_ADDR_LEN);
+ fw_ddb_entry->port = cpu_to_le16(ntohs(addr6->sin6_port));
+ fw_ddb_entry->options |= DDB_OPT_IPV6_DEVICE;
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: Destination Address [%pI6]: index [%d]\n",
+ __func__, fw_ddb_entry->ip_addr,
+ ddb_entry->fw_ddb_index));
+ } else {
+ ql4_printk(KERN_ERR, ha,
+ "%s: Failed to get IP Address\n",
+ __func__);
+ rval = -EINVAL;
+ goto exit_set_param;
+ }
- ret_val = qla4xxx_set_ddb_entry(ha, ddb_index, fw_ddb_entry_dma);
+ /* CHAP */
+ if (sess->username != NULL && sess->password != NULL) {
+ if (strlen(sess->username) && strlen(sess->password)) {
+ iscsi_opts |= BIT_7;
-exit_send_tgts:
+ rval = qla4xxx_get_chap_index(ha, sess->username,
+ sess->password,
+ LOCAL_CHAP, &idx);
+ if (rval)
+ goto exit_set_param;
+
+ fw_ddb_entry->chap_tbl_idx = cpu_to_le16(idx);
+ }
+ }
+
+ if (sess->username_in != NULL && sess->password_in != NULL) {
+ /* Check if BIDI CHAP */
+ if (strlen(sess->username_in) && strlen(sess->password_in)) {
+ iscsi_opts |= BIT_4;
+
+ rval = qla4xxx_get_chap_index(ha, sess->username_in,
+ sess->password_in,
+ BIDI_CHAP, &idx);
+ if (rval)
+ goto exit_set_param;
+ }
+ }
+
+ if (sess->initial_r2t_en)
+ iscsi_opts |= BIT_10;
+
+ if (sess->imm_data_en)
+ iscsi_opts |= BIT_11;
+
+ fw_ddb_entry->iscsi_options = cpu_to_le16(iscsi_opts);
+
+ if (conn->max_recv_dlength)
+ fw_ddb_entry->iscsi_max_rcv_data_seg_len =
+ __constant_cpu_to_le16((conn->max_recv_dlength / BYTE_UNITS));
+
+ if (sess->max_r2t)
+ fw_ddb_entry->iscsi_max_outsnd_r2t = cpu_to_le16(sess->max_r2t);
+
+ if (sess->first_burst)
+ fw_ddb_entry->iscsi_first_burst_len =
+ __constant_cpu_to_le16((sess->first_burst / BYTE_UNITS));
+
+ if (sess->max_burst)
+ fw_ddb_entry->iscsi_max_burst_len =
+ __constant_cpu_to_le16((sess->max_burst / BYTE_UNITS));
+
+ if (sess->time2wait)
+ fw_ddb_entry->iscsi_def_time2wait =
+ cpu_to_le16(sess->time2wait);
+
+ if (sess->time2retain)
+ fw_ddb_entry->iscsi_def_time2retain =
+ cpu_to_le16(sess->time2retain);
+
+ status = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index,
+ fw_ddb_entry_dma, mbx_sts);
+
+ if (status != QLA_SUCCESS)
+ rval = -EINVAL;
+exit_set_param:
dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
fw_ddb_entry, fw_ddb_entry_dma);
-exit_send_tgts_no_free:
- return ret_val;
+exit_set_param_no_free:
+ return rval;
}
+int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
+ uint16_t stats_size, dma_addr_t stats_dma)
+{
+ int status = QLA_SUCCESS;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
+ memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+ mbox_cmd[0] = MBOX_CMD_GET_MANAGEMENT_DATA;
+ mbox_cmd[1] = fw_ddb_index;
+ mbox_cmd[2] = LSDW(stats_dma);
+ mbox_cmd[3] = MSDW(stats_dma);
+ mbox_cmd[4] = stats_size;
+
+ status = qla4xxx_mailbox_command(ha, 5, 1, &mbox_cmd[0], &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha,
+ "%s: MBOX_CMD_GET_MANAGEMENT_DATA "
+ "failed w/ status %04X\n", __func__,
+ mbox_sts[0]));
+ }
+ return status;
+}
+
+int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
+ uint32_t ip_idx, uint32_t *sts)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_SUCCESS;
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+ mbox_cmd[0] = MBOX_CMD_GET_IP_ADDR_STATE;
+ mbox_cmd[1] = acb_idx;
+ mbox_cmd[2] = ip_idx;
+
+ status = qla4xxx_mailbox_command(ha, 3, 8, &mbox_cmd[0], &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: "
+ "MBOX_CMD_GET_IP_ADDR_STATE failed w/ "
+ "status %04X\n", __func__, mbox_sts[0]));
+ }
+ memcpy(sts, mbox_sts, sizeof(mbox_sts));
+ return status;
+}
+
+int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
+ uint32_t offset, uint32_t size)
+{
+ int status = QLA_SUCCESS;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_GET_NVRAM;
+ mbox_cmd[1] = LSDW(nvram_dma);
+ mbox_cmd[2] = MSDW(nvram_dma);
+ mbox_cmd[3] = offset;
+ mbox_cmd[4] = size;
+
+ status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
+ "status %04X\n", ha->host_no, __func__,
+ mbox_sts[0]));
+ }
+ return status;
+}
+
+int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
+ uint32_t offset, uint32_t size)
+{
+ int status = QLA_SUCCESS;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_SET_NVRAM;
+ mbox_cmd[1] = LSDW(nvram_dma);
+ mbox_cmd[2] = MSDW(nvram_dma);
+ mbox_cmd[3] = offset;
+ mbox_cmd[4] = size;
+
+ status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
+ "status %04X\n", ha->host_no, __func__,
+ mbox_sts[0]));
+ }
+ return status;
+}
+
+int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
+ uint32_t region, uint32_t field0,
+ uint32_t field1)
+{
+ int status = QLA_SUCCESS;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_RESTORE_FACTORY_DEFAULTS;
+ mbox_cmd[3] = region;
+ mbox_cmd[4] = field0;
+ mbox_cmd[5] = field1;
+
+ status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (status != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
+ "status %04X\n", ha->host_no, __func__,
+ mbox_sts[0]));
+ }
+ return status;
+}
diff --git a/drivers/scsi/qla4xxx/ql4_nvram.c b/drivers/scsi/qla4xxx/ql4_nvram.c
index b4b859b..7851f31 100644
--- a/drivers/scsi/qla4xxx/ql4_nvram.c
+++ b/drivers/scsi/qla4xxx/ql4_nvram.c
@@ -156,6 +156,27 @@
return val;
}
+u8 rd_nvram_byte(struct scsi_qla_host *ha, int offset)
+{
+ u16 val = 0;
+ u8 rval = 0;
+ int index = 0;
+
+ if (offset & 0x1)
+ index = (offset - 1) / 2;
+ else
+ index = offset / 2;
+
+ val = le16_to_cpu(rd_nvram_word(ha, index));
+
+ if (offset & 0x1)
+ rval = (u8)((val & 0xff00) >> 8);
+ else
+ rval = (u8)((val & 0x00ff));
+
+ return rval;
+}
+
int qla4xxx_is_nvram_configuration_valid(struct scsi_qla_host * ha)
{
int status = QLA_ERROR;
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index fdfe27b..f484ff4 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -2015,11 +2015,19 @@
hw->flt_region_boot = start;
break;
case FLT_REG_FW_82:
+ case FLT_REG_FW_82_1:
hw->flt_region_fw = start;
break;
case FLT_REG_BOOTLOAD_82:
hw->flt_region_bootload = start;
break;
+ case FLT_REG_ISCSI_PARAM:
+ hw->flt_iscsi_param = start;
+ break;
+ case FLT_REG_ISCSI_CHAP:
+ hw->flt_region_chap = start;
+ hw->flt_chap_size = le32_to_cpu(region->size);
+ break;
}
}
goto done;
@@ -2032,6 +2040,9 @@
hw->flt_region_boot = FA_BOOT_CODE_ADDR_82;
hw->flt_region_bootload = FA_BOOT_LOAD_ADDR_82;
hw->flt_region_fw = FA_RISC_CODE_ADDR_82;
+ hw->flt_region_chap = FA_FLASH_ISCSI_CHAP;
+ hw->flt_chap_size = FA_FLASH_CHAP_SIZE;
+
done:
DEBUG2(ql4_printk(KERN_INFO, ha, "FLT[%s]: flt=0x%x fdt=0x%x "
"boot=0x%x bootload=0x%x fw=0x%x\n", loc, hw->flt_region_flt,
@@ -2258,10 +2269,16 @@
}
/* Save M.A.C. address & serial_number */
+ ha->port_num = sys_info->port_num;
memcpy(ha->my_mac, &sys_info->mac_addr[0],
min(sizeof(ha->my_mac), sizeof(sys_info->mac_addr)));
memcpy(ha->serial_number, &sys_info->serial_number,
min(sizeof(ha->serial_number), sizeof(sys_info->serial_number)));
+ memcpy(ha->model_name, &sys_info->board_id_str,
+ min(sizeof(ha->model_name), sizeof(sys_info->board_id_str)));
+ ha->phy_port_cnt = sys_info->phys_port_cnt;
+ ha->phy_port_num = sys_info->port_num;
+ ha->iscsi_pci_func_cnt = sys_info->iscsi_pci_func_cnt;
DEBUG2(printk("scsi%ld: %s: "
"mac %02x:%02x:%02x:%02x:%02x:%02x "
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index f2364ec..30f31b1 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -6,6 +6,8 @@
*/
#include <linux/moduleparam.h>
#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/iscsi_boot_sysfs.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
@@ -63,6 +65,7 @@
"Target Session Recovery Timeout.\n"
" Default: 30 sec.");
+static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha);
/*
* SCSI host template entry points
*/
@@ -71,18 +74,41 @@
/*
* iSCSI template entry points
*/
-static int qla4xxx_tgt_dscvr(struct Scsi_Host *shost,
- enum iscsi_tgt_dscvr type, uint32_t enable,
- struct sockaddr *dst_addr);
static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn,
enum iscsi_param param, char *buf);
-static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
- enum iscsi_param param, char *buf);
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
-static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
+static int qla4xxx_iface_set_param(struct Scsi_Host *shost, void *data,
+ uint32_t len);
+static int qla4xxx_get_iface_param(struct iscsi_iface *iface,
+ enum iscsi_param_type param_type,
+ int param, char *buf);
static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
-
+static struct iscsi_endpoint *qla4xxx_ep_connect(struct Scsi_Host *shost,
+ struct sockaddr *dst_addr,
+ int non_blocking);
+static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms);
+static void qla4xxx_ep_disconnect(struct iscsi_endpoint *ep);
+static int qla4xxx_get_ep_param(struct iscsi_endpoint *ep,
+ enum iscsi_param param, char *buf);
+static int qla4xxx_conn_start(struct iscsi_cls_conn *conn);
+static struct iscsi_cls_conn *
+qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx);
+static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session,
+ struct iscsi_cls_conn *cls_conn,
+ uint64_t transport_fd, int is_leading);
+static void qla4xxx_conn_destroy(struct iscsi_cls_conn *conn);
+static struct iscsi_cls_session *
+qla4xxx_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max,
+ uint16_t qdepth, uint32_t initial_cmdsn);
+static void qla4xxx_session_destroy(struct iscsi_cls_session *sess);
+static void qla4xxx_task_work(struct work_struct *wdata);
+static int qla4xxx_alloc_pdu(struct iscsi_task *, uint8_t);
+static int qla4xxx_task_xmit(struct iscsi_task *);
+static void qla4xxx_task_cleanup(struct iscsi_task *);
+static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session);
+static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+ struct iscsi_stats *stats);
/*
* SCSI host template entry points
*/
@@ -94,7 +120,8 @@
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
-static void qla4xxx_scan_start(struct Scsi_Host *shost);
+static mode_t ql4_attr_is_visible(int param_type, int param);
+static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
static struct qla4_8xxx_legacy_intr_set legacy_intr[] =
QLA82XX_LEGACY_INTR_CONFIG;
@@ -115,9 +142,6 @@
.slave_alloc = qla4xxx_slave_alloc,
.slave_destroy = qla4xxx_slave_destroy,
- .scan_finished = iscsi_scan_finished,
- .scan_start = qla4xxx_scan_start,
-
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
@@ -125,56 +149,394 @@
.max_sectors = 0xFFFF,
.shost_attrs = qla4xxx_host_attrs,
+ .host_reset = qla4xxx_host_reset,
+ .vendor_id = SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC,
};
static struct iscsi_transport qla4xxx_iscsi_transport = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
- .caps = CAP_FW_DB | CAP_SENDTARGETS_OFFLOAD |
- CAP_DATA_PATH_OFFLOAD,
- .param_mask = ISCSI_CONN_PORT | ISCSI_CONN_ADDRESS |
- ISCSI_TARGET_NAME | ISCSI_TPGT |
- ISCSI_TARGET_ALIAS,
- .host_param_mask = ISCSI_HOST_HWADDRESS |
- ISCSI_HOST_IPADDRESS |
- ISCSI_HOST_INITIATOR_NAME,
- .tgt_dscvr = qla4xxx_tgt_dscvr,
+ .caps = CAP_TEXT_NEGO |
+ CAP_DATA_PATH_OFFLOAD | CAP_HDRDGST |
+ CAP_DATADGST | CAP_LOGIN_OFFLOAD |
+ CAP_MULTI_R2T,
+ .attr_is_visible = ql4_attr_is_visible,
+ .create_session = qla4xxx_session_create,
+ .destroy_session = qla4xxx_session_destroy,
+ .start_conn = qla4xxx_conn_start,
+ .create_conn = qla4xxx_conn_create,
+ .bind_conn = qla4xxx_conn_bind,
+ .stop_conn = iscsi_conn_stop,
+ .destroy_conn = qla4xxx_conn_destroy,
+ .set_param = iscsi_set_param,
.get_conn_param = qla4xxx_conn_get_param,
- .get_session_param = qla4xxx_sess_get_param,
+ .get_session_param = iscsi_session_get_param,
+ .get_ep_param = qla4xxx_get_ep_param,
+ .ep_connect = qla4xxx_ep_connect,
+ .ep_poll = qla4xxx_ep_poll,
+ .ep_disconnect = qla4xxx_ep_disconnect,
+ .get_stats = qla4xxx_conn_get_stats,
+ .send_pdu = iscsi_conn_send_pdu,
+ .xmit_task = qla4xxx_task_xmit,
+ .cleanup_task = qla4xxx_task_cleanup,
+ .alloc_pdu = qla4xxx_alloc_pdu,
+
.get_host_param = qla4xxx_host_get_param,
- .session_recovery_timedout = qla4xxx_recovery_timedout,
+ .set_iface_param = qla4xxx_iface_set_param,
+ .get_iface_param = qla4xxx_get_iface_param,
+ .bsg_request = qla4xxx_bsg_request,
};
static struct scsi_transport_template *qla4xxx_scsi_transport;
+static mode_t ql4_attr_is_visible(int param_type, int param)
+{
+ switch (param_type) {
+ case ISCSI_HOST_PARAM:
+ switch (param) {
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ case ISCSI_HOST_PARAM_IPADDRESS:
+ case ISCSI_HOST_PARAM_INITIATOR_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ case ISCSI_PARAM:
+ switch (param) {
+ case ISCSI_PARAM_PERSISTENT_ADDRESS:
+ case ISCSI_PARAM_PERSISTENT_PORT:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_TARGET_NAME:
+ case ISCSI_PARAM_TPGT:
+ case ISCSI_PARAM_TARGET_ALIAS:
+ case ISCSI_PARAM_MAX_BURST:
+ case ISCSI_PARAM_MAX_R2T:
+ case ISCSI_PARAM_FIRST_BURST:
+ case ISCSI_PARAM_MAX_RECV_DLENGTH:
+ case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+ case ISCSI_PARAM_IFACE_NAME:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ case ISCSI_NET_PARAM:
+ switch (param) {
+ case ISCSI_NET_PARAM_IPV4_ADDR:
+ case ISCSI_NET_PARAM_IPV4_SUBNET:
+ case ISCSI_NET_PARAM_IPV4_GW:
+ case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
+ case ISCSI_NET_PARAM_IFACE_ENABLE:
+ case ISCSI_NET_PARAM_IPV6_LINKLOCAL:
+ case ISCSI_NET_PARAM_IPV6_ADDR:
+ case ISCSI_NET_PARAM_IPV6_ROUTER:
+ case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG:
+ case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG:
+ case ISCSI_NET_PARAM_VLAN_ID:
+ case ISCSI_NET_PARAM_VLAN_PRIORITY:
+ case ISCSI_NET_PARAM_VLAN_ENABLED:
+ case ISCSI_NET_PARAM_MTU:
+ case ISCSI_NET_PARAM_PORT:
+ return S_IRUGO;
+ default:
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
+static int qla4xxx_get_iface_param(struct iscsi_iface *iface,
+ enum iscsi_param_type param_type,
+ int param, char *buf)
+{
+ struct Scsi_Host *shost = iscsi_iface_to_shost(iface);
+ struct scsi_qla_host *ha = to_qla_host(shost);
+ int len = -ENOSYS;
+
+ if (param_type != ISCSI_NET_PARAM)
+ return -ENOSYS;
+
+ switch (param) {
+ case ISCSI_NET_PARAM_IPV4_ADDR:
+ len = sprintf(buf, "%pI4\n", &ha->ip_config.ip_address);
+ break;
+ case ISCSI_NET_PARAM_IPV4_SUBNET:
+ len = sprintf(buf, "%pI4\n", &ha->ip_config.subnet_mask);
+ break;
+ case ISCSI_NET_PARAM_IPV4_GW:
+ len = sprintf(buf, "%pI4\n", &ha->ip_config.gateway);
+ break;
+ case ISCSI_NET_PARAM_IFACE_ENABLE:
+ if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
+ len = sprintf(buf, "%s\n",
+ (ha->ip_config.ipv4_options &
+ IPOPT_IPV4_PROTOCOL_ENABLE) ?
+ "enabled" : "disabled");
+ else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
+ len = sprintf(buf, "%s\n",
+ (ha->ip_config.ipv6_options &
+ IPV6_OPT_IPV6_PROTOCOL_ENABLE) ?
+ "enabled" : "disabled");
+ break;
+ case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
+ len = sprintf(buf, "%s\n",
+ (ha->ip_config.tcp_options & TCPOPT_DHCP_ENABLE) ?
+ "dhcp" : "static");
+ break;
+ case ISCSI_NET_PARAM_IPV6_ADDR:
+ if (iface->iface_num == 0)
+ len = sprintf(buf, "%pI6\n", &ha->ip_config.ipv6_addr0);
+ if (iface->iface_num == 1)
+ len = sprintf(buf, "%pI6\n", &ha->ip_config.ipv6_addr1);
+ break;
+ case ISCSI_NET_PARAM_IPV6_LINKLOCAL:
+ len = sprintf(buf, "%pI6\n",
+ &ha->ip_config.ipv6_link_local_addr);
+ break;
+ case ISCSI_NET_PARAM_IPV6_ROUTER:
+ len = sprintf(buf, "%pI6\n",
+ &ha->ip_config.ipv6_default_router_addr);
+ break;
+ case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG:
+ len = sprintf(buf, "%s\n",
+ (ha->ip_config.ipv6_addl_options &
+ IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) ?
+ "nd" : "static");
+ break;
+ case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG:
+ len = sprintf(buf, "%s\n",
+ (ha->ip_config.ipv6_addl_options &
+ IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR) ?
+ "auto" : "static");
+ break;
+ case ISCSI_NET_PARAM_VLAN_ID:
+ if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
+ len = sprintf(buf, "%d\n",
+ (ha->ip_config.ipv4_vlan_tag &
+ ISCSI_MAX_VLAN_ID));
+ else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
+ len = sprintf(buf, "%d\n",
+ (ha->ip_config.ipv6_vlan_tag &
+ ISCSI_MAX_VLAN_ID));
+ break;
+ case ISCSI_NET_PARAM_VLAN_PRIORITY:
+ if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
+ len = sprintf(buf, "%d\n",
+ ((ha->ip_config.ipv4_vlan_tag >> 13) &
+ ISCSI_MAX_VLAN_PRIORITY));
+ else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
+ len = sprintf(buf, "%d\n",
+ ((ha->ip_config.ipv6_vlan_tag >> 13) &
+ ISCSI_MAX_VLAN_PRIORITY));
+ break;
+ case ISCSI_NET_PARAM_VLAN_ENABLED:
+ if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
+ len = sprintf(buf, "%s\n",
+ (ha->ip_config.ipv4_options &
+ IPOPT_VLAN_TAGGING_ENABLE) ?
+ "enabled" : "disabled");
+ else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
+ len = sprintf(buf, "%s\n",
+ (ha->ip_config.ipv6_options &
+ IPV6_OPT_VLAN_TAGGING_ENABLE) ?
+ "enabled" : "disabled");
+ break;
+ case ISCSI_NET_PARAM_MTU:
+ len = sprintf(buf, "%d\n", ha->ip_config.eth_mtu_size);
+ break;
+ case ISCSI_NET_PARAM_PORT:
+ if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4)
+ len = sprintf(buf, "%d\n", ha->ip_config.ipv4_port);
+ else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6)
+ len = sprintf(buf, "%d\n", ha->ip_config.ipv6_port);
+ break;
+ default:
+ len = -ENOSYS;
+ }
+
+ return len;
+}
+
+static struct iscsi_endpoint *
+qla4xxx_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
+ int non_blocking)
+{
+ int ret;
+ struct iscsi_endpoint *ep;
+ struct qla_endpoint *qla_ep;
+ struct scsi_qla_host *ha;
+ struct sockaddr_in *addr;
+ struct sockaddr_in6 *addr6;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ if (!shost) {
+ ret = -ENXIO;
+ printk(KERN_ERR "%s: shost is NULL\n",
+ __func__);
+ return ERR_PTR(ret);
+ }
+
+ ha = iscsi_host_priv(shost);
+
+ ep = iscsi_create_endpoint(sizeof(struct qla_endpoint));
+ if (!ep) {
+ ret = -ENOMEM;
+ return ERR_PTR(ret);
+ }
+
+ qla_ep = ep->dd_data;
+ memset(qla_ep, 0, sizeof(struct qla_endpoint));
+ if (dst_addr->sa_family == AF_INET) {
+ memcpy(&qla_ep->dst_addr, dst_addr, sizeof(struct sockaddr_in));
+ addr = (struct sockaddr_in *)&qla_ep->dst_addr;
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI4\n", __func__,
+ (char *)&addr->sin_addr));
+ } else if (dst_addr->sa_family == AF_INET6) {
+ memcpy(&qla_ep->dst_addr, dst_addr,
+ sizeof(struct sockaddr_in6));
+ addr6 = (struct sockaddr_in6 *)&qla_ep->dst_addr;
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI6\n", __func__,
+ (char *)&addr6->sin6_addr));
+ }
+
+ qla_ep->host = shost;
+
+ return ep;
+}
+
+static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+ struct qla_endpoint *qla_ep;
+ struct scsi_qla_host *ha;
+ int ret = 0;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ qla_ep = ep->dd_data;
+ ha = to_qla_host(qla_ep->host);
+
+ if (adapter_up(ha))
+ ret = 1;
+
+ return ret;
+}
+
+static void qla4xxx_ep_disconnect(struct iscsi_endpoint *ep)
+{
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ iscsi_destroy_endpoint(ep);
+}
+
+static int qla4xxx_get_ep_param(struct iscsi_endpoint *ep,
+ enum iscsi_param param,
+ char *buf)
+{
+ struct qla_endpoint *qla_ep = ep->dd_data;
+ struct sockaddr *dst_addr;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+
+ switch (param) {
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ if (!qla_ep)
+ return -ENOTCONN;
+
+ dst_addr = (struct sockaddr *)&qla_ep->dst_addr;
+ if (!dst_addr)
+ return -ENOTCONN;
+
+ return iscsi_conn_get_addr_param((struct sockaddr_storage *)
+ &qla_ep->dst_addr, param, buf);
+ default:
+ return -ENOSYS;
+ }
+}
+
+static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+ struct iscsi_stats *stats)
+{
+ struct iscsi_session *sess;
+ struct iscsi_cls_session *cls_sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+ struct ql_iscsi_stats *ql_iscsi_stats;
+ int stats_size;
+ int ret;
+ dma_addr_t iscsi_stats_dma;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+
+ cls_sess = iscsi_conn_to_session(cls_conn);
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ stats_size = PAGE_ALIGN(sizeof(struct ql_iscsi_stats));
+ /* Allocate memory */
+ ql_iscsi_stats = dma_alloc_coherent(&ha->pdev->dev, stats_size,
+ &iscsi_stats_dma, GFP_KERNEL);
+ if (!ql_iscsi_stats) {
+ ql4_printk(KERN_ERR, ha,
+ "Unable to allocate memory for iscsi stats\n");
+ goto exit_get_stats;
+ }
+
+ ret = qla4xxx_get_mgmt_data(ha, ddb_entry->fw_ddb_index, stats_size,
+ iscsi_stats_dma);
+ if (ret != QLA_SUCCESS) {
+ ql4_printk(KERN_ERR, ha,
+ "Unable to retreive iscsi stats\n");
+ goto free_stats;
+ }
+
+ /* octets */
+ stats->txdata_octets = le64_to_cpu(ql_iscsi_stats->tx_data_octets);
+ stats->rxdata_octets = le64_to_cpu(ql_iscsi_stats->rx_data_octets);
+ /* xmit pdus */
+ stats->noptx_pdus = le32_to_cpu(ql_iscsi_stats->tx_nopout_pdus);
+ stats->scsicmd_pdus = le32_to_cpu(ql_iscsi_stats->tx_scsi_cmd_pdus);
+ stats->tmfcmd_pdus = le32_to_cpu(ql_iscsi_stats->tx_tmf_cmd_pdus);
+ stats->login_pdus = le32_to_cpu(ql_iscsi_stats->tx_login_cmd_pdus);
+ stats->text_pdus = le32_to_cpu(ql_iscsi_stats->tx_text_cmd_pdus);
+ stats->dataout_pdus = le32_to_cpu(ql_iscsi_stats->tx_scsi_write_pdus);
+ stats->logout_pdus = le32_to_cpu(ql_iscsi_stats->tx_logout_cmd_pdus);
+ stats->snack_pdus = le32_to_cpu(ql_iscsi_stats->tx_snack_req_pdus);
+ /* recv pdus */
+ stats->noprx_pdus = le32_to_cpu(ql_iscsi_stats->rx_nopin_pdus);
+ stats->scsirsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_scsi_resp_pdus);
+ stats->tmfrsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_tmf_resp_pdus);
+ stats->textrsp_pdus = le32_to_cpu(ql_iscsi_stats->rx_text_resp_pdus);
+ stats->datain_pdus = le32_to_cpu(ql_iscsi_stats->rx_scsi_read_pdus);
+ stats->logoutrsp_pdus =
+ le32_to_cpu(ql_iscsi_stats->rx_logout_resp_pdus);
+ stats->r2t_pdus = le32_to_cpu(ql_iscsi_stats->rx_r2t_pdus);
+ stats->async_pdus = le32_to_cpu(ql_iscsi_stats->rx_async_pdus);
+ stats->rjt_pdus = le32_to_cpu(ql_iscsi_stats->rx_reject_pdus);
+
+free_stats:
+ dma_free_coherent(&ha->pdev->dev, stats_size, ql_iscsi_stats,
+ iscsi_stats_dma);
+exit_get_stats:
+ return;
+}
+
static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc)
{
struct iscsi_cls_session *session;
- struct ddb_entry *ddb_entry;
+ struct iscsi_session *sess;
+ unsigned long flags;
+ enum blk_eh_timer_return ret = BLK_EH_NOT_HANDLED;
session = starget_to_session(scsi_target(sc->device));
- ddb_entry = session->dd_data;
+ sess = session->dd_data;
- /* if we are not logged in then the LLD is going to clean up the cmd */
- if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
- return BLK_EH_RESET_TIMER;
- else
- return BLK_EH_NOT_HANDLED;
-}
+ spin_lock_irqsave(&session->lock, flags);
+ if (session->state == ISCSI_SESSION_FAILED)
+ ret = BLK_EH_RESET_TIMER;
+ spin_unlock_irqrestore(&session->lock, flags);
-static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
-{
- struct ddb_entry *ddb_entry = session->dd_data;
- struct scsi_qla_host *ha = ddb_entry->ha;
-
- if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
- atomic_set(&ddb_entry->state, DDB_STATE_DEAD);
-
- DEBUG2(printk("scsi%ld: %s: ddb [%d] session recovery timeout "
- "of (%d) secs exhausted, marking device DEAD.\n",
- ha->host_no, __func__, ddb_entry->fw_ddb_index,
- ddb_entry->sess->recovery_tmo));
- }
+ return ret;
}
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
@@ -188,9 +550,7 @@
len = sysfs_format_mac(buf, ha->my_mac, MAC_ADDR_LEN);
break;
case ISCSI_HOST_PARAM_IPADDRESS:
- len = sprintf(buf, "%d.%d.%d.%d\n", ha->ip_address[0],
- ha->ip_address[1], ha->ip_address[2],
- ha->ip_address[3]);
+ len = sprintf(buf, "%pI4\n", &ha->ip_config.ip_address);
break;
case ISCSI_HOST_PARAM_INITIATOR_NAME:
len = sprintf(buf, "%s\n", ha->name_string);
@@ -202,154 +562,851 @@
return len;
}
-static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess,
- enum iscsi_param param, char *buf)
+static void qla4xxx_create_ipv4_iface(struct scsi_qla_host *ha)
{
- struct ddb_entry *ddb_entry = sess->dd_data;
- int len;
-
- switch (param) {
- case ISCSI_PARAM_TARGET_NAME:
- len = snprintf(buf, PAGE_SIZE - 1, "%s\n",
- ddb_entry->iscsi_name);
- break;
- case ISCSI_PARAM_TPGT:
- len = sprintf(buf, "%u\n", ddb_entry->tpgt);
- break;
- case ISCSI_PARAM_TARGET_ALIAS:
- len = snprintf(buf, PAGE_SIZE - 1, "%s\n",
- ddb_entry->iscsi_alias);
- break;
- default:
- return -ENOSYS;
- }
-
- return len;
-}
-
-static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn,
- enum iscsi_param param, char *buf)
-{
- struct iscsi_cls_session *session;
- struct ddb_entry *ddb_entry;
- int len;
-
- session = iscsi_dev_to_session(conn->dev.parent);
- ddb_entry = session->dd_data;
-
- switch (param) {
- case ISCSI_PARAM_CONN_PORT:
- len = sprintf(buf, "%hu\n", ddb_entry->port);
- break;
- case ISCSI_PARAM_CONN_ADDRESS:
- /* TODO: what are the ipv6 bits */
- len = sprintf(buf, "%pI4\n", &ddb_entry->ip_addr);
- break;
- default:
- return -ENOSYS;
- }
-
- return len;
-}
-
-static int qla4xxx_tgt_dscvr(struct Scsi_Host *shost,
- enum iscsi_tgt_dscvr type, uint32_t enable,
- struct sockaddr *dst_addr)
-{
- struct scsi_qla_host *ha;
- struct sockaddr_in *addr;
- struct sockaddr_in6 *addr6;
- int ret = 0;
-
- ha = (struct scsi_qla_host *) shost->hostdata;
-
- switch (type) {
- case ISCSI_TGT_DSCVR_SEND_TARGETS:
- if (dst_addr->sa_family == AF_INET) {
- addr = (struct sockaddr_in *)dst_addr;
- if (qla4xxx_send_tgts(ha, (char *)&addr->sin_addr,
- addr->sin_port) != QLA_SUCCESS)
- ret = -EIO;
- } else if (dst_addr->sa_family == AF_INET6) {
- /*
- * TODO: fix qla4xxx_send_tgts
- */
- addr6 = (struct sockaddr_in6 *)dst_addr;
- if (qla4xxx_send_tgts(ha, (char *)&addr6->sin6_addr,
- addr6->sin6_port) != QLA_SUCCESS)
- ret = -EIO;
- } else
- ret = -ENOSYS;
- break;
- default:
- ret = -ENOSYS;
- }
- return ret;
-}
-
-void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry)
-{
- if (!ddb_entry->sess)
+ if (ha->iface_ipv4)
return;
- if (ddb_entry->conn) {
- atomic_set(&ddb_entry->state, DDB_STATE_DEAD);
- iscsi_remove_session(ddb_entry->sess);
- }
- iscsi_free_session(ddb_entry->sess);
+ /* IPv4 */
+ ha->iface_ipv4 = iscsi_create_iface(ha->host,
+ &qla4xxx_iscsi_transport,
+ ISCSI_IFACE_TYPE_IPV4, 0, 0);
+ if (!ha->iface_ipv4)
+ ql4_printk(KERN_ERR, ha, "Could not create IPv4 iSCSI "
+ "iface0.\n");
}
-int qla4xxx_add_sess(struct ddb_entry *ddb_entry)
+static void qla4xxx_create_ipv6_iface(struct scsi_qla_host *ha)
{
- int err;
+ if (!ha->iface_ipv6_0)
+ /* IPv6 iface-0 */
+ ha->iface_ipv6_0 = iscsi_create_iface(ha->host,
+ &qla4xxx_iscsi_transport,
+ ISCSI_IFACE_TYPE_IPV6, 0,
+ 0);
+ if (!ha->iface_ipv6_0)
+ ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI "
+ "iface0.\n");
- ddb_entry->sess->recovery_tmo = ql4xsess_recovery_tmo;
+ if (!ha->iface_ipv6_1)
+ /* IPv6 iface-1 */
+ ha->iface_ipv6_1 = iscsi_create_iface(ha->host,
+ &qla4xxx_iscsi_transport,
+ ISCSI_IFACE_TYPE_IPV6, 1,
+ 0);
+ if (!ha->iface_ipv6_1)
+ ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI "
+ "iface1.\n");
+}
- err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index);
- if (err) {
- DEBUG2(printk(KERN_ERR "Could not add session.\n"));
- return err;
+static void qla4xxx_create_ifaces(struct scsi_qla_host *ha)
+{
+ if (ha->ip_config.ipv4_options & IPOPT_IPV4_PROTOCOL_ENABLE)
+ qla4xxx_create_ipv4_iface(ha);
+
+ if (ha->ip_config.ipv6_options & IPV6_OPT_IPV6_PROTOCOL_ENABLE)
+ qla4xxx_create_ipv6_iface(ha);
+}
+
+static void qla4xxx_destroy_ipv4_iface(struct scsi_qla_host *ha)
+{
+ if (ha->iface_ipv4) {
+ iscsi_destroy_iface(ha->iface_ipv4);
+ ha->iface_ipv4 = NULL;
}
+}
- ddb_entry->conn = iscsi_create_conn(ddb_entry->sess, 0, 0);
- if (!ddb_entry->conn) {
- iscsi_remove_session(ddb_entry->sess);
- DEBUG2(printk(KERN_ERR "Could not add connection.\n"));
+static void qla4xxx_destroy_ipv6_iface(struct scsi_qla_host *ha)
+{
+ if (ha->iface_ipv6_0) {
+ iscsi_destroy_iface(ha->iface_ipv6_0);
+ ha->iface_ipv6_0 = NULL;
+ }
+ if (ha->iface_ipv6_1) {
+ iscsi_destroy_iface(ha->iface_ipv6_1);
+ ha->iface_ipv6_1 = NULL;
+ }
+}
+
+static void qla4xxx_destroy_ifaces(struct scsi_qla_host *ha)
+{
+ qla4xxx_destroy_ipv4_iface(ha);
+ qla4xxx_destroy_ipv6_iface(ha);
+}
+
+static void qla4xxx_set_ipv6(struct scsi_qla_host *ha,
+ struct iscsi_iface_param_info *iface_param,
+ struct addr_ctrl_blk *init_fw_cb)
+{
+ /*
+ * iface_num 0 is valid for IPv6 Addr, linklocal, router, autocfg.
+ * iface_num 1 is valid only for IPv6 Addr.
+ */
+ switch (iface_param->param) {
+ case ISCSI_NET_PARAM_IPV6_ADDR:
+ if (iface_param->iface_num & 0x1)
+ /* IPv6 Addr 1 */
+ memcpy(init_fw_cb->ipv6_addr1, iface_param->value,
+ sizeof(init_fw_cb->ipv6_addr1));
+ else
+ /* IPv6 Addr 0 */
+ memcpy(init_fw_cb->ipv6_addr0, iface_param->value,
+ sizeof(init_fw_cb->ipv6_addr0));
+ break;
+ case ISCSI_NET_PARAM_IPV6_LINKLOCAL:
+ if (iface_param->iface_num & 0x1)
+ break;
+ memcpy(init_fw_cb->ipv6_if_id, &iface_param->value[8],
+ sizeof(init_fw_cb->ipv6_if_id));
+ break;
+ case ISCSI_NET_PARAM_IPV6_ROUTER:
+ if (iface_param->iface_num & 0x1)
+ break;
+ memcpy(init_fw_cb->ipv6_dflt_rtr_addr, iface_param->value,
+ sizeof(init_fw_cb->ipv6_dflt_rtr_addr));
+ break;
+ case ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG:
+ /* Autocfg applies to even interface */
+ if (iface_param->iface_num & 0x1)
+ break;
+
+ if (iface_param->value[0] == ISCSI_IPV6_AUTOCFG_DISABLE)
+ init_fw_cb->ipv6_addtl_opts &=
+ cpu_to_le16(
+ ~IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE);
+ else if (iface_param->value[0] == ISCSI_IPV6_AUTOCFG_ND_ENABLE)
+ init_fw_cb->ipv6_addtl_opts |=
+ cpu_to_le16(
+ IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE);
+ else
+ ql4_printk(KERN_ERR, ha, "Invalid autocfg setting for "
+ "IPv6 addr\n");
+ break;
+ case ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG:
+ /* Autocfg applies to even interface */
+ if (iface_param->iface_num & 0x1)
+ break;
+
+ if (iface_param->value[0] ==
+ ISCSI_IPV6_LINKLOCAL_AUTOCFG_ENABLE)
+ init_fw_cb->ipv6_addtl_opts |= cpu_to_le16(
+ IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR);
+ else if (iface_param->value[0] ==
+ ISCSI_IPV6_LINKLOCAL_AUTOCFG_DISABLE)
+ init_fw_cb->ipv6_addtl_opts &= cpu_to_le16(
+ ~IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR);
+ else
+ ql4_printk(KERN_ERR, ha, "Invalid autocfg setting for "
+ "IPv6 linklocal addr\n");
+ break;
+ case ISCSI_NET_PARAM_IPV6_ROUTER_AUTOCFG:
+ /* Autocfg applies to even interface */
+ if (iface_param->iface_num & 0x1)
+ break;
+
+ if (iface_param->value[0] == ISCSI_IPV6_ROUTER_AUTOCFG_ENABLE)
+ memset(init_fw_cb->ipv6_dflt_rtr_addr, 0,
+ sizeof(init_fw_cb->ipv6_dflt_rtr_addr));
+ break;
+ case ISCSI_NET_PARAM_IFACE_ENABLE:
+ if (iface_param->value[0] == ISCSI_IFACE_ENABLE) {
+ init_fw_cb->ipv6_opts |=
+ cpu_to_le16(IPV6_OPT_IPV6_PROTOCOL_ENABLE);
+ qla4xxx_create_ipv6_iface(ha);
+ } else {
+ init_fw_cb->ipv6_opts &=
+ cpu_to_le16(~IPV6_OPT_IPV6_PROTOCOL_ENABLE &
+ 0xFFFF);
+ qla4xxx_destroy_ipv6_iface(ha);
+ }
+ break;
+ case ISCSI_NET_PARAM_VLAN_TAG:
+ if (iface_param->len != sizeof(init_fw_cb->ipv6_vlan_tag))
+ break;
+ init_fw_cb->ipv6_vlan_tag =
+ cpu_to_be16(*(uint16_t *)iface_param->value);
+ break;
+ case ISCSI_NET_PARAM_VLAN_ENABLED:
+ if (iface_param->value[0] == ISCSI_VLAN_ENABLE)
+ init_fw_cb->ipv6_opts |=
+ cpu_to_le16(IPV6_OPT_VLAN_TAGGING_ENABLE);
+ else
+ init_fw_cb->ipv6_opts &=
+ cpu_to_le16(~IPV6_OPT_VLAN_TAGGING_ENABLE);
+ break;
+ case ISCSI_NET_PARAM_MTU:
+ init_fw_cb->eth_mtu_size =
+ cpu_to_le16(*(uint16_t *)iface_param->value);
+ break;
+ case ISCSI_NET_PARAM_PORT:
+ /* Autocfg applies to even interface */
+ if (iface_param->iface_num & 0x1)
+ break;
+
+ init_fw_cb->ipv6_port =
+ cpu_to_le16(*(uint16_t *)iface_param->value);
+ break;
+ default:
+ ql4_printk(KERN_ERR, ha, "Unknown IPv6 param = %d\n",
+ iface_param->param);
+ break;
+ }
+}
+
+static void qla4xxx_set_ipv4(struct scsi_qla_host *ha,
+ struct iscsi_iface_param_info *iface_param,
+ struct addr_ctrl_blk *init_fw_cb)
+{
+ switch (iface_param->param) {
+ case ISCSI_NET_PARAM_IPV4_ADDR:
+ memcpy(init_fw_cb->ipv4_addr, iface_param->value,
+ sizeof(init_fw_cb->ipv4_addr));
+ break;
+ case ISCSI_NET_PARAM_IPV4_SUBNET:
+ memcpy(init_fw_cb->ipv4_subnet, iface_param->value,
+ sizeof(init_fw_cb->ipv4_subnet));
+ break;
+ case ISCSI_NET_PARAM_IPV4_GW:
+ memcpy(init_fw_cb->ipv4_gw_addr, iface_param->value,
+ sizeof(init_fw_cb->ipv4_gw_addr));
+ break;
+ case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
+ if (iface_param->value[0] == ISCSI_BOOTPROTO_DHCP)
+ init_fw_cb->ipv4_tcp_opts |=
+ cpu_to_le16(TCPOPT_DHCP_ENABLE);
+ else if (iface_param->value[0] == ISCSI_BOOTPROTO_STATIC)
+ init_fw_cb->ipv4_tcp_opts &=
+ cpu_to_le16(~TCPOPT_DHCP_ENABLE);
+ else
+ ql4_printk(KERN_ERR, ha, "Invalid IPv4 bootproto\n");
+ break;
+ case ISCSI_NET_PARAM_IFACE_ENABLE:
+ if (iface_param->value[0] == ISCSI_IFACE_ENABLE) {
+ init_fw_cb->ipv4_ip_opts |=
+ cpu_to_le16(IPOPT_IPV4_PROTOCOL_ENABLE);
+ qla4xxx_create_ipv4_iface(ha);
+ } else {
+ init_fw_cb->ipv4_ip_opts &=
+ cpu_to_le16(~IPOPT_IPV4_PROTOCOL_ENABLE &
+ 0xFFFF);
+ qla4xxx_destroy_ipv4_iface(ha);
+ }
+ break;
+ case ISCSI_NET_PARAM_VLAN_TAG:
+ if (iface_param->len != sizeof(init_fw_cb->ipv4_vlan_tag))
+ break;
+ init_fw_cb->ipv4_vlan_tag =
+ cpu_to_be16(*(uint16_t *)iface_param->value);
+ break;
+ case ISCSI_NET_PARAM_VLAN_ENABLED:
+ if (iface_param->value[0] == ISCSI_VLAN_ENABLE)
+ init_fw_cb->ipv4_ip_opts |=
+ cpu_to_le16(IPOPT_VLAN_TAGGING_ENABLE);
+ else
+ init_fw_cb->ipv4_ip_opts &=
+ cpu_to_le16(~IPOPT_VLAN_TAGGING_ENABLE);
+ break;
+ case ISCSI_NET_PARAM_MTU:
+ init_fw_cb->eth_mtu_size =
+ cpu_to_le16(*(uint16_t *)iface_param->value);
+ break;
+ case ISCSI_NET_PARAM_PORT:
+ init_fw_cb->ipv4_port =
+ cpu_to_le16(*(uint16_t *)iface_param->value);
+ break;
+ default:
+ ql4_printk(KERN_ERR, ha, "Unknown IPv4 param = %d\n",
+ iface_param->param);
+ break;
+ }
+}
+
+static void
+qla4xxx_initcb_to_acb(struct addr_ctrl_blk *init_fw_cb)
+{
+ struct addr_ctrl_blk_def *acb;
+ acb = (struct addr_ctrl_blk_def *)init_fw_cb;
+ memset(acb->reserved1, 0, sizeof(acb->reserved1));
+ memset(acb->reserved2, 0, sizeof(acb->reserved2));
+ memset(acb->reserved3, 0, sizeof(acb->reserved3));
+ memset(acb->reserved4, 0, sizeof(acb->reserved4));
+ memset(acb->reserved5, 0, sizeof(acb->reserved5));
+ memset(acb->reserved6, 0, sizeof(acb->reserved6));
+ memset(acb->reserved7, 0, sizeof(acb->reserved7));
+ memset(acb->reserved8, 0, sizeof(acb->reserved8));
+ memset(acb->reserved9, 0, sizeof(acb->reserved9));
+ memset(acb->reserved10, 0, sizeof(acb->reserved10));
+ memset(acb->reserved11, 0, sizeof(acb->reserved11));
+ memset(acb->reserved12, 0, sizeof(acb->reserved12));
+ memset(acb->reserved13, 0, sizeof(acb->reserved13));
+ memset(acb->reserved14, 0, sizeof(acb->reserved14));
+ memset(acb->reserved15, 0, sizeof(acb->reserved15));
+}
+
+static int
+qla4xxx_iface_set_param(struct Scsi_Host *shost, void *data, uint32_t len)
+{
+ struct scsi_qla_host *ha = to_qla_host(shost);
+ int rval = 0;
+ struct iscsi_iface_param_info *iface_param = NULL;
+ struct addr_ctrl_blk *init_fw_cb = NULL;
+ dma_addr_t init_fw_cb_dma;
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ uint32_t rem = len;
+ struct nlattr *attr;
+
+ init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
+ sizeof(struct addr_ctrl_blk),
+ &init_fw_cb_dma, GFP_KERNEL);
+ if (!init_fw_cb) {
+ ql4_printk(KERN_ERR, ha, "%s: Unable to alloc init_cb\n",
+ __func__);
return -ENOMEM;
}
- /* finally ready to go */
- iscsi_unblock_session(ddb_entry->sess);
+ memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)) {
+ ql4_printk(KERN_ERR, ha, "%s: get ifcb failed\n", __func__);
+ rval = -EIO;
+ goto exit_init_fw_cb;
+ }
+
+ nla_for_each_attr(attr, data, len, rem) {
+ iface_param = nla_data(attr);
+
+ if (iface_param->param_type != ISCSI_NET_PARAM)
+ continue;
+
+ switch (iface_param->iface_type) {
+ case ISCSI_IFACE_TYPE_IPV4:
+ switch (iface_param->iface_num) {
+ case 0:
+ qla4xxx_set_ipv4(ha, iface_param, init_fw_cb);
+ break;
+ default:
+ /* Cannot have more than one IPv4 interface */
+ ql4_printk(KERN_ERR, ha, "Invalid IPv4 iface "
+ "number = %d\n",
+ iface_param->iface_num);
+ break;
+ }
+ break;
+ case ISCSI_IFACE_TYPE_IPV6:
+ switch (iface_param->iface_num) {
+ case 0:
+ case 1:
+ qla4xxx_set_ipv6(ha, iface_param, init_fw_cb);
+ break;
+ default:
+ /* Cannot have more than two IPv6 interface */
+ ql4_printk(KERN_ERR, ha, "Invalid IPv6 iface "
+ "number = %d\n",
+ iface_param->iface_num);
+ break;
+ }
+ break;
+ default:
+ ql4_printk(KERN_ERR, ha, "Invalid iface type\n");
+ break;
+ }
+ }
+
+ init_fw_cb->cookie = cpu_to_le32(0x11BEAD5A);
+
+ rval = qla4xxx_set_flash(ha, init_fw_cb_dma, FLASH_SEGMENT_IFCB,
+ sizeof(struct addr_ctrl_blk),
+ FLASH_OPT_RMW_COMMIT);
+ if (rval != QLA_SUCCESS) {
+ ql4_printk(KERN_ERR, ha, "%s: set flash mbx failed\n",
+ __func__);
+ rval = -EIO;
+ goto exit_init_fw_cb;
+ }
+
+ qla4xxx_disable_acb(ha);
+
+ qla4xxx_initcb_to_acb(init_fw_cb);
+
+ rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma);
+ if (rval != QLA_SUCCESS) {
+ ql4_printk(KERN_ERR, ha, "%s: set acb mbx failed\n",
+ __func__);
+ rval = -EIO;
+ goto exit_init_fw_cb;
+ }
+
+ memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
+ qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb,
+ init_fw_cb_dma);
+
+exit_init_fw_cb:
+ dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
+ init_fw_cb, init_fw_cb_dma);
+
+ return rval;
+}
+
+static int qla4xxx_conn_get_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, char *buf)
+{
+ struct iscsi_conn *conn;
+ struct qla_conn *qla_conn;
+ struct sockaddr *dst_addr;
+ int len = 0;
+
+ conn = cls_conn->dd_data;
+ qla_conn = conn->dd_data;
+ dst_addr = &qla_conn->qla_ep->dst_addr;
+
+ switch (param) {
+ case ISCSI_PARAM_CONN_PORT:
+ case ISCSI_PARAM_CONN_ADDRESS:
+ return iscsi_conn_get_addr_param((struct sockaddr_storage *)
+ dst_addr, param, buf);
+ default:
+ return iscsi_conn_get_param(cls_conn, param, buf);
+ }
+
+ return len;
+
+}
+
+static struct iscsi_cls_session *
+qla4xxx_session_create(struct iscsi_endpoint *ep,
+ uint16_t cmds_max, uint16_t qdepth,
+ uint32_t initial_cmdsn)
+{
+ struct iscsi_cls_session *cls_sess;
+ struct scsi_qla_host *ha;
+ struct qla_endpoint *qla_ep;
+ struct ddb_entry *ddb_entry;
+ uint32_t ddb_index;
+ uint32_t mbx_sts = 0;
+ struct iscsi_session *sess;
+ struct sockaddr *dst_addr;
+ int ret;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ if (!ep) {
+ printk(KERN_ERR "qla4xxx: missing ep.\n");
+ return NULL;
+ }
+
+ qla_ep = ep->dd_data;
+ dst_addr = (struct sockaddr *)&qla_ep->dst_addr;
+ ha = to_qla_host(qla_ep->host);
+
+get_ddb_index:
+ ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES);
+
+ if (ddb_index >= MAX_DDB_ENTRIES) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Free DDB index not available\n"));
+ return NULL;
+ }
+
+ if (test_and_set_bit(ddb_index, ha->ddb_idx_map))
+ goto get_ddb_index;
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Found a free DDB index at %d\n", ddb_index));
+ ret = qla4xxx_req_ddb_entry(ha, ddb_index, &mbx_sts);
+ if (ret == QLA_ERROR) {
+ if (mbx_sts == MBOX_STS_COMMAND_ERROR) {
+ ql4_printk(KERN_INFO, ha,
+ "DDB index = %d not available trying next\n",
+ ddb_index);
+ goto get_ddb_index;
+ }
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Free FW DDB not available\n"));
+ return NULL;
+ }
+
+ cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, qla_ep->host,
+ cmds_max, sizeof(struct ddb_entry),
+ sizeof(struct ql4_task_data),
+ initial_cmdsn, ddb_index);
+ if (!cls_sess)
+ return NULL;
+
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ddb_entry->fw_ddb_index = ddb_index;
+ ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE;
+ ddb_entry->ha = ha;
+ ddb_entry->sess = cls_sess;
+ cls_sess->recovery_tmo = ql4xsess_recovery_tmo;
+ ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry;
+ ha->tot_ddbs++;
+
+ return cls_sess;
+}
+
+static void qla4xxx_session_destroy(struct iscsi_cls_session *cls_sess)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+ unsigned long flags;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ qla4xxx_clear_ddb_entry(ha, ddb_entry->fw_ddb_index);
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ qla4xxx_free_ddb(ha, ddb_entry);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ iscsi_session_teardown(cls_sess);
+}
+
+static struct iscsi_cls_conn *
+qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx)
+{
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn),
+ conn_idx);
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ddb_entry->conn = cls_conn;
+
+ return cls_conn;
+}
+
+static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session,
+ struct iscsi_cls_conn *cls_conn,
+ uint64_t transport_fd, int is_leading)
+{
+ struct iscsi_conn *conn;
+ struct qla_conn *qla_conn;
+ struct iscsi_endpoint *ep;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+
+ if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+ return -EINVAL;
+ ep = iscsi_lookup_endpoint(transport_fd);
+ conn = cls_conn->dd_data;
+ qla_conn = conn->dd_data;
+ qla_conn->qla_ep = ep->dd_data;
return 0;
}
-struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha)
+static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn)
{
+ struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn);
+ struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
- struct iscsi_cls_session *sess;
+ struct scsi_qla_host *ha;
+ struct dev_db_entry *fw_ddb_entry;
+ dma_addr_t fw_ddb_entry_dma;
+ uint32_t mbx_sts = 0;
+ int ret = 0;
+ int status = QLA_SUCCESS;
- sess = iscsi_alloc_session(ha->host, &qla4xxx_iscsi_transport,
- sizeof(struct ddb_entry));
- if (!sess)
- return NULL;
-
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
- memset(ddb_entry, 0, sizeof(*ddb_entry));
- ddb_entry->ha = ha;
- ddb_entry->sess = sess;
- return ddb_entry;
+ ha = ddb_entry->ha;
+
+ fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ &fw_ddb_entry_dma, GFP_KERNEL);
+ if (!fw_ddb_entry) {
+ ql4_printk(KERN_ERR, ha,
+ "%s: Unable to allocate dma buffer\n", __func__);
+ return -ENOMEM;
+ }
+
+ ret = qla4xxx_set_param_ddbentry(ha, ddb_entry, cls_conn, &mbx_sts);
+ if (ret) {
+ /* If iscsid is stopped and started then no need to do
+ * set param again since ddb state will be already
+ * active and FW does not allow set ddb to an
+ * active session.
+ */
+ if (mbx_sts)
+ if (ddb_entry->fw_ddb_device_state ==
+ DDB_DS_SESSION_ACTIVE) {
+ iscsi_conn_start(ddb_entry->conn);
+ iscsi_conn_login_event(ddb_entry->conn,
+ ISCSI_CONN_STATE_LOGGED_IN);
+ goto exit_set_param;
+ }
+
+ ql4_printk(KERN_ERR, ha, "%s: Failed set param for index[%d]\n",
+ __func__, ddb_entry->fw_ddb_index);
+ goto exit_conn_start;
+ }
+
+ status = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index);
+ if (status == QLA_ERROR) {
+ ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__,
+ sess->targetname);
+ ret = -EINVAL;
+ goto exit_conn_start;
+ }
+
+ if (ddb_entry->fw_ddb_device_state == DDB_DS_NO_CONNECTION_ACTIVE)
+ ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS;
+
+ DEBUG2(printk(KERN_INFO "%s: DDB state [%d]\n", __func__,
+ ddb_entry->fw_ddb_device_state));
+
+exit_set_param:
+ ret = 0;
+
+exit_conn_start:
+ dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ fw_ddb_entry, fw_ddb_entry_dma);
+ return ret;
}
-static void qla4xxx_scan_start(struct Scsi_Host *shost)
+static void qla4xxx_conn_destroy(struct iscsi_cls_conn *cls_conn)
{
- struct scsi_qla_host *ha = shost_priv(shost);
- struct ddb_entry *ddb_entry, *ddbtemp;
+ struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn);
+ struct iscsi_session *sess;
+ struct scsi_qla_host *ha;
+ struct ddb_entry *ddb_entry;
+ int options;
- /* finish setup of sessions that were already setup in firmware */
- list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
- if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE)
- qla4xxx_add_sess(ddb_entry);
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ options = LOGOUT_OPTION_CLOSE_SESSION;
+ if (qla4xxx_session_logout_ddb(ha, ddb_entry, options) == QLA_ERROR)
+ ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", __func__);
+}
+
+static void qla4xxx_task_work(struct work_struct *wdata)
+{
+ struct ql4_task_data *task_data;
+ struct scsi_qla_host *ha;
+ struct passthru_status *sts;
+ struct iscsi_task *task;
+ struct iscsi_hdr *hdr;
+ uint8_t *data;
+ uint32_t data_len;
+ struct iscsi_conn *conn;
+ int hdr_len;
+ itt_t itt;
+
+ task_data = container_of(wdata, struct ql4_task_data, task_work);
+ ha = task_data->ha;
+ task = task_data->task;
+ sts = &task_data->sts;
+ hdr_len = sizeof(struct iscsi_hdr);
+
+ DEBUG3(printk(KERN_INFO "Status returned\n"));
+ DEBUG3(qla4xxx_dump_buffer(sts, 64));
+ DEBUG3(printk(KERN_INFO "Response buffer"));
+ DEBUG3(qla4xxx_dump_buffer(task_data->resp_buffer, 64));
+
+ conn = task->conn;
+
+ switch (sts->completionStatus) {
+ case PASSTHRU_STATUS_COMPLETE:
+ hdr = (struct iscsi_hdr *)task_data->resp_buffer;
+ /* Assign back the itt in hdr, until we use the PREASSIGN_TAG */
+ itt = sts->handle;
+ hdr->itt = itt;
+ data = task_data->resp_buffer + hdr_len;
+ data_len = task_data->resp_len - hdr_len;
+ iscsi_complete_pdu(conn, hdr, data, data_len);
+ break;
+ default:
+ ql4_printk(KERN_ERR, ha, "Passthru failed status = 0x%x\n",
+ sts->completionStatus);
+ break;
}
+ return;
+}
+
+static int qla4xxx_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
+{
+ struct ql4_task_data *task_data;
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+ int hdr_len;
+
+ sess = task->conn->session;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+ task_data = task->dd_data;
+ memset(task_data, 0, sizeof(struct ql4_task_data));
+
+ if (task->sc) {
+ ql4_printk(KERN_INFO, ha,
+ "%s: SCSI Commands not implemented\n", __func__);
+ return -EINVAL;
+ }
+
+ hdr_len = sizeof(struct iscsi_hdr);
+ task_data->ha = ha;
+ task_data->task = task;
+
+ if (task->data_count) {
+ task_data->data_dma = dma_map_single(&ha->pdev->dev, task->data,
+ task->data_count,
+ PCI_DMA_TODEVICE);
+ }
+
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
+ __func__, task->conn->max_recv_dlength, hdr_len));
+
+ task_data->resp_len = task->conn->max_recv_dlength + hdr_len;
+ task_data->resp_buffer = dma_alloc_coherent(&ha->pdev->dev,
+ task_data->resp_len,
+ &task_data->resp_dma,
+ GFP_ATOMIC);
+ if (!task_data->resp_buffer)
+ goto exit_alloc_pdu;
+
+ task_data->req_len = task->data_count + hdr_len;
+ task_data->req_buffer = dma_alloc_coherent(&ha->pdev->dev,
+ task_data->req_len,
+ &task_data->req_dma,
+ GFP_ATOMIC);
+ if (!task_data->req_buffer)
+ goto exit_alloc_pdu;
+
+ task->hdr = task_data->req_buffer;
+
+ INIT_WORK(&task_data->task_work, qla4xxx_task_work);
+
+ return 0;
+
+exit_alloc_pdu:
+ if (task_data->resp_buffer)
+ dma_free_coherent(&ha->pdev->dev, task_data->resp_len,
+ task_data->resp_buffer, task_data->resp_dma);
+
+ if (task_data->req_buffer)
+ dma_free_coherent(&ha->pdev->dev, task_data->req_len,
+ task_data->req_buffer, task_data->req_dma);
+ return -ENOMEM;
+}
+
+static void qla4xxx_task_cleanup(struct iscsi_task *task)
+{
+ struct ql4_task_data *task_data;
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+ int hdr_len;
+
+ hdr_len = sizeof(struct iscsi_hdr);
+ sess = task->conn->session;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+ task_data = task->dd_data;
+
+ if (task->data_count) {
+ dma_unmap_single(&ha->pdev->dev, task_data->data_dma,
+ task->data_count, PCI_DMA_TODEVICE);
+ }
+
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
+ __func__, task->conn->max_recv_dlength, hdr_len));
+
+ dma_free_coherent(&ha->pdev->dev, task_data->resp_len,
+ task_data->resp_buffer, task_data->resp_dma);
+ dma_free_coherent(&ha->pdev->dev, task_data->req_len,
+ task_data->req_buffer, task_data->req_dma);
+ return;
+}
+
+static int qla4xxx_task_xmit(struct iscsi_task *task)
+{
+ struct scsi_cmnd *sc = task->sc;
+ struct iscsi_session *sess = task->conn->session;
+ struct ddb_entry *ddb_entry = sess->dd_data;
+ struct scsi_qla_host *ha = ddb_entry->ha;
+
+ if (!sc)
+ return qla4xxx_send_passthru0(task);
+
+ ql4_printk(KERN_INFO, ha, "%s: scsi cmd xmit not implemented\n",
+ __func__);
+ return -ENOSYS;
+}
+
+void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry)
+{
+ struct iscsi_cls_session *cls_sess;
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_session *sess;
+ struct iscsi_conn *conn;
+ uint32_t ddb_state;
+ dma_addr_t fw_ddb_entry_dma;
+ struct dev_db_entry *fw_ddb_entry;
+
+ fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ &fw_ddb_entry_dma, GFP_KERNEL);
+ if (!fw_ddb_entry) {
+ ql4_printk(KERN_ERR, ha,
+ "%s: Unable to allocate dma buffer\n", __func__);
+ return;
+ }
+
+ if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry,
+ fw_ddb_entry_dma, NULL, NULL, &ddb_state,
+ NULL, NULL, NULL) == QLA_ERROR) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
+ "get_ddb_entry for fw_ddb_index %d\n",
+ ha->host_no, __func__,
+ ddb_entry->fw_ddb_index));
+ return;
+ }
+
+ cls_sess = ddb_entry->sess;
+ sess = cls_sess->dd_data;
+
+ cls_conn = ddb_entry->conn;
+ conn = cls_conn->dd_data;
+
+ /* Update params */
+ conn->max_recv_dlength = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len);
+
+ conn->max_xmit_dlength = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_max_snd_data_seg_len);
+
+ sess->initial_r2t_en =
+ (BIT_10 & le16_to_cpu(fw_ddb_entry->iscsi_options));
+
+ sess->max_r2t = le16_to_cpu(fw_ddb_entry->iscsi_max_outsnd_r2t);
+
+ sess->imm_data_en = (BIT_11 & le16_to_cpu(fw_ddb_entry->iscsi_options));
+
+ sess->first_burst = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_first_burst_len);
+
+ sess->max_burst = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_max_burst_len);
+
+ sess->time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait);
+
+ sess->time2retain = le16_to_cpu(fw_ddb_entry->iscsi_def_time2retain);
+
+ sess->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+
+ memcpy(sess->initiatorname, ha->name_string,
+ min(sizeof(ha->name_string), sizeof(sess->initiatorname)));
}
/*
@@ -376,25 +1433,15 @@
}
/***
- * qla4xxx_mark_device_missing - mark a device as missing.
- * @ha: Pointer to host adapter structure.
+ * qla4xxx_mark_device_missing - blocks the session
+ * @cls_session: Pointer to the session to be blocked
* @ddb_entry: Pointer to device database entry
*
* This routine marks a device missing and close connection.
**/
-void qla4xxx_mark_device_missing(struct scsi_qla_host *ha,
- struct ddb_entry *ddb_entry)
+void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session)
{
- if ((atomic_read(&ddb_entry->state) != DDB_STATE_DEAD)) {
- atomic_set(&ddb_entry->state, DDB_STATE_MISSING);
- DEBUG2(printk("scsi%ld: ddb [%d] marked MISSING\n",
- ha->host_no, ddb_entry->fw_ddb_index));
- } else
- DEBUG2(printk("scsi%ld: ddb [%d] DEAD\n", ha->host_no,
- ddb_entry->fw_ddb_index))
-
- iscsi_block_session(ddb_entry->sess);
- iscsi_conn_error_event(ddb_entry->conn, ISCSI_ERR_CONN_FAILED);
+ iscsi_block_session(cls_session);
}
/**
@@ -405,10 +1452,7 @@
**/
void qla4xxx_mark_all_devices_missing(struct scsi_qla_host *ha)
{
- struct ddb_entry *ddb_entry, *ddbtemp;
- list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
- qla4xxx_mark_device_missing(ha, ddb_entry);
- }
+ iscsi_host_for_each_session(ha->host, qla4xxx_mark_device_missing);
}
static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha,
@@ -495,20 +1539,13 @@
goto qc_fail_command;
}
- if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
- if (atomic_read(&ddb_entry->state) == DDB_STATE_DEAD) {
- cmd->result = DID_NO_CONNECT << 16;
- goto qc_fail_command;
- }
- return SCSI_MLQUEUE_TARGET_BUSY;
- }
-
if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) ||
test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) ||
!test_bit(AF_ONLINE, &ha->flags) ||
+ !test_bit(AF_LINK_UP, &ha->flags) ||
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags))
goto qc_host_busy;
@@ -563,6 +1600,13 @@
ha->srb_mempool = NULL;
+ if (ha->chap_dma_pool)
+ dma_pool_destroy(ha->chap_dma_pool);
+
+ if (ha->chap_list)
+ vfree(ha->chap_list);
+ ha->chap_list = NULL;
+
/* release io space registers */
if (is_qla8022(ha)) {
if (ha->nx_pcibase)
@@ -636,6 +1680,15 @@
goto mem_alloc_error_exit;
}
+ ha->chap_dma_pool = dma_pool_create("ql4_chap", &ha->pdev->dev,
+ CHAP_DMA_BLOCK_SIZE, 8, 0);
+
+ if (ha->chap_dma_pool == NULL) {
+ ql4_printk(KERN_WARNING, ha,
+ "%s: chap_dma_pool allocation failed..\n", __func__);
+ goto mem_alloc_error_exit;
+ }
+
return QLA_SUCCESS;
mem_alloc_error_exit:
@@ -753,7 +1806,6 @@
**/
static void qla4xxx_timer(struct scsi_qla_host *ha)
{
- struct ddb_entry *ddb_entry, *dtemp;
int start_dpc = 0;
uint16_t w;
@@ -773,69 +1825,6 @@
qla4_8xxx_watchdog(ha);
}
- /* Search for relogin's to time-out and port down retry. */
- list_for_each_entry_safe(ddb_entry, dtemp, &ha->ddb_list, list) {
- /* Count down time between sending relogins */
- if (adapter_up(ha) &&
- !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
- atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
- if (atomic_read(&ddb_entry->retry_relogin_timer) !=
- INVALID_ENTRY) {
- if (atomic_read(&ddb_entry->retry_relogin_timer)
- == 0) {
- atomic_set(&ddb_entry->
- retry_relogin_timer,
- INVALID_ENTRY);
- set_bit(DPC_RELOGIN_DEVICE,
- &ha->dpc_flags);
- set_bit(DF_RELOGIN, &ddb_entry->flags);
- DEBUG2(printk("scsi%ld: %s: ddb [%d]"
- " login device\n",
- ha->host_no, __func__,
- ddb_entry->fw_ddb_index));
- } else
- atomic_dec(&ddb_entry->
- retry_relogin_timer);
- }
- }
-
- /* Wait for relogin to timeout */
- if (atomic_read(&ddb_entry->relogin_timer) &&
- (atomic_dec_and_test(&ddb_entry->relogin_timer) != 0)) {
- /*
- * If the relogin times out and the device is
- * still NOT ONLINE then try and relogin again.
- */
- if (atomic_read(&ddb_entry->state) !=
- DDB_STATE_ONLINE &&
- ddb_entry->fw_ddb_device_state ==
- DDB_DS_SESSION_FAILED) {
- /* Reset retry relogin timer */
- atomic_inc(&ddb_entry->relogin_retry_count);
- DEBUG2(printk("scsi%ld: ddb [%d] relogin"
- " timed out-retrying"
- " relogin (%d)\n",
- ha->host_no,
- ddb_entry->fw_ddb_index,
- atomic_read(&ddb_entry->
- relogin_retry_count))
- );
- start_dpc++;
- DEBUG(printk("scsi%ld:%d:%d: ddb [%d] "
- "initiate relogin after"
- " %d seconds\n",
- ha->host_no, ddb_entry->bus,
- ddb_entry->target,
- ddb_entry->fw_ddb_index,
- ddb_entry->default_time2wait + 4)
- );
-
- atomic_set(&ddb_entry->retry_relogin_timer,
- ddb_entry->default_time2wait + 4);
- }
- }
- }
-
if (!is_qla8022(ha)) {
/* Check for heartbeat interval. */
if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE &&
@@ -1081,6 +2070,17 @@
clear_bit(AF_INIT_DONE, &ha->flags);
}
+static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+
+ sess = cls_session->dd_data;
+ ddb_entry = sess->dd_data;
+ ddb_entry->fw_ddb_device_state = DDB_DS_SESSION_FAILED;
+ iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
/**
* qla4xxx_recover_adapter - recovers adapter after a fatal error
* @ha: Pointer to host adapter structure.
@@ -1093,11 +2093,14 @@
/* Stall incoming I/O until we are done */
scsi_block_requests(ha->host);
clear_bit(AF_ONLINE, &ha->flags);
+ clear_bit(AF_LINK_UP, &ha->flags);
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: adapter OFFLINE\n", __func__));
set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
+ iscsi_host_for_each_session(ha->host, qla4xxx_fail_session);
+
if (test_bit(DPC_RESET_HA, &ha->dpc_flags))
reset_chip = 1;
@@ -1160,7 +2163,7 @@
/* NOTE: AF_ONLINE flag set upon successful completion of
* qla4xxx_initialize_adapter */
- status = qla4xxx_initialize_adapter(ha, PRESERVE_DDB_LIST);
+ status = qla4xxx_initialize_adapter(ha);
}
/* Retry failed adapter initialization, if necessary
@@ -1225,27 +2228,34 @@
return status;
}
-static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha)
+static void qla4xxx_relogin_devices(struct iscsi_cls_session *cls_session)
{
- struct ddb_entry *ddb_entry, *dtemp;
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
- list_for_each_entry_safe(ddb_entry, dtemp, &ha->ddb_list, list) {
- if ((atomic_read(&ddb_entry->state) == DDB_STATE_MISSING) ||
- (atomic_read(&ddb_entry->state) == DDB_STATE_DEAD)) {
- if (ddb_entry->fw_ddb_device_state ==
- DDB_DS_SESSION_ACTIVE) {
- atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
- ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
- " marked ONLINE\n", ha->host_no, __func__,
- ddb_entry->fw_ddb_index);
-
- iscsi_unblock_session(ddb_entry->sess);
- } else
- qla4xxx_relogin_device(ha, ddb_entry);
+ sess = cls_session->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+ if (!iscsi_is_session_online(cls_session)) {
+ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
+ " unblock session\n", ha->host_no, __func__,
+ ddb_entry->fw_ddb_index);
+ iscsi_unblock_session(ddb_entry->sess);
+ } else {
+ /* Trigger relogin */
+ iscsi_session_failure(cls_session->dd_data,
+ ISCSI_ERR_CONN_FAILED);
}
}
}
+static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha)
+{
+ iscsi_host_for_each_session(ha->host, qla4xxx_relogin_devices);
+}
+
void qla4xxx_wake_dpc(struct scsi_qla_host *ha)
{
if (ha->dpc_thread)
@@ -1267,7 +2277,6 @@
{
struct scsi_qla_host *ha =
container_of(work, struct scsi_qla_host, dpc_work);
- struct ddb_entry *ddb_entry, *dtemp;
int status = QLA_ERROR;
DEBUG2(printk("scsi%ld: %s: DPC handler waking up."
@@ -1363,31 +2372,6 @@
qla4xxx_relogin_all_devices(ha);
}
}
-
- /* ---- relogin device? --- */
- if (adapter_up(ha) &&
- test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) {
- list_for_each_entry_safe(ddb_entry, dtemp,
- &ha->ddb_list, list) {
- if (test_and_clear_bit(DF_RELOGIN, &ddb_entry->flags) &&
- atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
- qla4xxx_relogin_device(ha, ddb_entry);
-
- /*
- * If mbx cmd times out there is no point
- * in continuing further.
- * With large no of targets this can hang
- * the system.
- */
- if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
- printk(KERN_WARNING "scsi%ld: %s: "
- "need to reset hba\n",
- ha->host_no, __func__);
- break;
- }
- }
- }
-
}
/**
@@ -1410,6 +2394,10 @@
if (ha->dpc_thread)
destroy_workqueue(ha->dpc_thread);
+ /* Kill the kernel thread for this host */
+ if (ha->task_wq)
+ destroy_workqueue(ha->task_wq);
+
/* Put firmware in known state */
ha->isp_ops->reset_firmware(ha);
@@ -1601,6 +2589,594 @@
return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->rsp_q_in));
}
+static ssize_t qla4xxx_show_boot_eth_info(void *data, int type, char *buf)
+{
+ struct scsi_qla_host *ha = data;
+ char *str = buf;
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_ETH_FLAGS:
+ rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT);
+ break;
+ case ISCSI_BOOT_ETH_INDEX:
+ rc = sprintf(str, "0\n");
+ break;
+ case ISCSI_BOOT_ETH_MAC:
+ rc = sysfs_format_mac(str, ha->my_mac,
+ MAC_ADDR_LEN);
+ break;
+ default:
+ rc = -ENOSYS;
+ break;
+ }
+ return rc;
+}
+
+static mode_t qla4xxx_eth_get_attr_visibility(void *data, int type)
+{
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_ETH_FLAGS:
+ case ISCSI_BOOT_ETH_MAC:
+ case ISCSI_BOOT_ETH_INDEX:
+ rc = S_IRUGO;
+ break;
+ default:
+ rc = 0;
+ break;
+ }
+ return rc;
+}
+
+static ssize_t qla4xxx_show_boot_ini_info(void *data, int type, char *buf)
+{
+ struct scsi_qla_host *ha = data;
+ char *str = buf;
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_INI_INITIATOR_NAME:
+ rc = sprintf(str, "%s\n", ha->name_string);
+ break;
+ default:
+ rc = -ENOSYS;
+ break;
+ }
+ return rc;
+}
+
+static mode_t qla4xxx_ini_get_attr_visibility(void *data, int type)
+{
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_INI_INITIATOR_NAME:
+ rc = S_IRUGO;
+ break;
+ default:
+ rc = 0;
+ break;
+ }
+ return rc;
+}
+
+static ssize_t
+qla4xxx_show_boot_tgt_info(struct ql4_boot_session_info *boot_sess, int type,
+ char *buf)
+{
+ struct ql4_conn_info *boot_conn = &boot_sess->conn_list[0];
+ char *str = buf;
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_TGT_NAME:
+ rc = sprintf(buf, "%s\n", (char *)&boot_sess->target_name);
+ break;
+ case ISCSI_BOOT_TGT_IP_ADDR:
+ if (boot_sess->conn_list[0].dest_ipaddr.ip_type == 0x1)
+ rc = sprintf(buf, "%pI4\n",
+ &boot_conn->dest_ipaddr.ip_address);
+ else
+ rc = sprintf(str, "%pI6\n",
+ &boot_conn->dest_ipaddr.ip_address);
+ break;
+ case ISCSI_BOOT_TGT_PORT:
+ rc = sprintf(str, "%d\n", boot_conn->dest_port);
+ break;
+ case ISCSI_BOOT_TGT_CHAP_NAME:
+ rc = sprintf(str, "%.*s\n",
+ boot_conn->chap.target_chap_name_length,
+ (char *)&boot_conn->chap.target_chap_name);
+ break;
+ case ISCSI_BOOT_TGT_CHAP_SECRET:
+ rc = sprintf(str, "%.*s\n",
+ boot_conn->chap.target_secret_length,
+ (char *)&boot_conn->chap.target_secret);
+ break;
+ case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+ rc = sprintf(str, "%.*s\n",
+ boot_conn->chap.intr_chap_name_length,
+ (char *)&boot_conn->chap.intr_chap_name);
+ break;
+ case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+ rc = sprintf(str, "%.*s\n",
+ boot_conn->chap.intr_secret_length,
+ (char *)&boot_conn->chap.intr_secret);
+ break;
+ case ISCSI_BOOT_TGT_FLAGS:
+ rc = sprintf(str, "%d\n", SYSFS_FLAG_FW_SEL_BOOT);
+ break;
+ case ISCSI_BOOT_TGT_NIC_ASSOC:
+ rc = sprintf(str, "0\n");
+ break;
+ default:
+ rc = -ENOSYS;
+ break;
+ }
+ return rc;
+}
+
+static ssize_t qla4xxx_show_boot_tgt_pri_info(void *data, int type, char *buf)
+{
+ struct scsi_qla_host *ha = data;
+ struct ql4_boot_session_info *boot_sess = &(ha->boot_tgt.boot_pri_sess);
+
+ return qla4xxx_show_boot_tgt_info(boot_sess, type, buf);
+}
+
+static ssize_t qla4xxx_show_boot_tgt_sec_info(void *data, int type, char *buf)
+{
+ struct scsi_qla_host *ha = data;
+ struct ql4_boot_session_info *boot_sess = &(ha->boot_tgt.boot_sec_sess);
+
+ return qla4xxx_show_boot_tgt_info(boot_sess, type, buf);
+}
+
+static mode_t qla4xxx_tgt_get_attr_visibility(void *data, int type)
+{
+ int rc;
+
+ switch (type) {
+ case ISCSI_BOOT_TGT_NAME:
+ case ISCSI_BOOT_TGT_IP_ADDR:
+ case ISCSI_BOOT_TGT_PORT:
+ case ISCSI_BOOT_TGT_CHAP_NAME:
+ case ISCSI_BOOT_TGT_CHAP_SECRET:
+ case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+ case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+ case ISCSI_BOOT_TGT_NIC_ASSOC:
+ case ISCSI_BOOT_TGT_FLAGS:
+ rc = S_IRUGO;
+ break;
+ default:
+ rc = 0;
+ break;
+ }
+ return rc;
+}
+
+static void qla4xxx_boot_release(void *data)
+{
+ struct scsi_qla_host *ha = data;
+
+ scsi_host_put(ha->host);
+}
+
+static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[])
+{
+ dma_addr_t buf_dma;
+ uint32_t addr, pri_addr, sec_addr;
+ uint32_t offset;
+ uint16_t func_num;
+ uint8_t val;
+ uint8_t *buf = NULL;
+ size_t size = 13 * sizeof(uint8_t);
+ int ret = QLA_SUCCESS;
+
+ func_num = PCI_FUNC(ha->pdev->devfn);
+
+ ql4_printk(KERN_INFO, ha, "%s: Get FW boot info for 0x%x func %d\n",
+ __func__, ha->pdev->device, func_num);
+
+ if (is_qla40XX(ha)) {
+ if (func_num == 1) {
+ addr = NVRAM_PORT0_BOOT_MODE;
+ pri_addr = NVRAM_PORT0_BOOT_PRI_TGT;
+ sec_addr = NVRAM_PORT0_BOOT_SEC_TGT;
+ } else if (func_num == 3) {
+ addr = NVRAM_PORT1_BOOT_MODE;
+ pri_addr = NVRAM_PORT1_BOOT_PRI_TGT;
+ sec_addr = NVRAM_PORT1_BOOT_SEC_TGT;
+ } else {
+ ret = QLA_ERROR;
+ goto exit_boot_info;
+ }
+
+ /* Check Boot Mode */
+ val = rd_nvram_byte(ha, addr);
+ if (!(val & 0x07)) {
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "%s: Failed Boot options : 0x%x\n",
+ __func__, val));
+ ret = QLA_ERROR;
+ goto exit_boot_info;
+ }
+
+ /* get primary valid target index */
+ val = rd_nvram_byte(ha, pri_addr);
+ if (val & BIT_7)
+ ddb_index[0] = (val & 0x7f);
+
+ /* get secondary valid target index */
+ val = rd_nvram_byte(ha, sec_addr);
+ if (val & BIT_7)
+ ddb_index[1] = (val & 0x7f);
+
+ } else if (is_qla8022(ha)) {
+ buf = dma_alloc_coherent(&ha->pdev->dev, size,
+ &buf_dma, GFP_KERNEL);
+ if (!buf) {
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "%s: Unable to allocate dma buffer\n",
+ __func__));
+ ret = QLA_ERROR;
+ goto exit_boot_info;
+ }
+
+ if (ha->port_num == 0)
+ offset = BOOT_PARAM_OFFSET_PORT0;
+ else if (ha->port_num == 1)
+ offset = BOOT_PARAM_OFFSET_PORT1;
+ else {
+ ret = QLA_ERROR;
+ goto exit_boot_info_free;
+ }
+ addr = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_iscsi_param * 4) +
+ offset;
+ if (qla4xxx_get_flash(ha, buf_dma, addr,
+ 13 * sizeof(uint8_t)) != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
+ "failed\n", ha->host_no, __func__));
+ ret = QLA_ERROR;
+ goto exit_boot_info_free;
+ }
+ /* Check Boot Mode */
+ if (!(buf[1] & 0x07)) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Failed: Boot options : 0x%x\n",
+ buf[1]));
+ ret = QLA_ERROR;
+ goto exit_boot_info_free;
+ }
+
+ /* get primary valid target index */
+ if (buf[2] & BIT_7)
+ ddb_index[0] = buf[2] & 0x7f;
+
+ /* get secondary valid target index */
+ if (buf[11] & BIT_7)
+ ddb_index[1] = buf[11] & 0x7f;
+ } else {
+ ret = QLA_ERROR;
+ goto exit_boot_info;
+ }
+
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary target ID %d, Secondary"
+ " target ID %d\n", __func__, ddb_index[0],
+ ddb_index[1]));
+
+exit_boot_info_free:
+ dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma);
+exit_boot_info:
+ return ret;
+}
+
+/**
+ * qla4xxx_get_bidi_chap - Get a BIDI CHAP user and password
+ * @ha: pointer to adapter structure
+ * @username: CHAP username to be returned
+ * @password: CHAP password to be returned
+ *
+ * If a boot entry has BIDI CHAP enabled then we need to set the BIDI CHAP
+ * user and password in the sysfs entry in /sys/firmware/iscsi_boot#/.
+ * So from the CHAP cache find the first BIDI CHAP entry and set it
+ * to the boot record in sysfs.
+ **/
+static int qla4xxx_get_bidi_chap(struct scsi_qla_host *ha, char *username,
+ char *password)
+{
+ int i, ret = -EINVAL;
+ int max_chap_entries = 0;
+ struct ql4_chap_table *chap_table;
+
+ if (is_qla8022(ha))
+ max_chap_entries = (ha->hw.flt_chap_size / 2) /
+ sizeof(struct ql4_chap_table);
+ else
+ max_chap_entries = MAX_CHAP_ENTRIES_40XX;
+
+ if (!ha->chap_list) {
+ ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n");
+ return ret;
+ }
+
+ mutex_lock(&ha->chap_sem);
+ for (i = 0; i < max_chap_entries; i++) {
+ chap_table = (struct ql4_chap_table *)ha->chap_list + i;
+ if (chap_table->cookie !=
+ __constant_cpu_to_le16(CHAP_VALID_COOKIE)) {
+ continue;
+ }
+
+ if (chap_table->flags & BIT_7) /* local */
+ continue;
+
+ if (!(chap_table->flags & BIT_6)) /* Not BIDI */
+ continue;
+
+ strncpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
+ strncpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
+ ret = 0;
+ break;
+ }
+ mutex_unlock(&ha->chap_sem);
+
+ return ret;
+}
+
+
+static int qla4xxx_get_boot_target(struct scsi_qla_host *ha,
+ struct ql4_boot_session_info *boot_sess,
+ uint16_t ddb_index)
+{
+ struct ql4_conn_info *boot_conn = &boot_sess->conn_list[0];
+ struct dev_db_entry *fw_ddb_entry;
+ dma_addr_t fw_ddb_entry_dma;
+ uint16_t idx;
+ uint16_t options;
+ int ret = QLA_SUCCESS;
+
+ fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ &fw_ddb_entry_dma, GFP_KERNEL);
+ if (!fw_ddb_entry) {
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "%s: Unable to allocate dma buffer.\n",
+ __func__));
+ ret = QLA_ERROR;
+ return ret;
+ }
+
+ if (qla4xxx_bootdb_by_index(ha, fw_ddb_entry,
+ fw_ddb_entry_dma, ddb_index)) {
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "%s: Flash DDB read Failed\n", __func__));
+ ret = QLA_ERROR;
+ goto exit_boot_target;
+ }
+
+ /* Update target name and IP from DDB */
+ memcpy(boot_sess->target_name, fw_ddb_entry->iscsi_name,
+ min(sizeof(boot_sess->target_name),
+ sizeof(fw_ddb_entry->iscsi_name)));
+
+ options = le16_to_cpu(fw_ddb_entry->options);
+ if (options & DDB_OPT_IPV6_DEVICE) {
+ memcpy(&boot_conn->dest_ipaddr.ip_address,
+ &fw_ddb_entry->ip_addr[0], IPv6_ADDR_LEN);
+ } else {
+ boot_conn->dest_ipaddr.ip_type = 0x1;
+ memcpy(&boot_conn->dest_ipaddr.ip_address,
+ &fw_ddb_entry->ip_addr[0], IP_ADDR_LEN);
+ }
+
+ boot_conn->dest_port = le16_to_cpu(fw_ddb_entry->port);
+
+ /* update chap information */
+ idx = __le16_to_cpu(fw_ddb_entry->chap_tbl_idx);
+
+ if (BIT_7 & le16_to_cpu(fw_ddb_entry->iscsi_options)) {
+
+ DEBUG2(ql4_printk(KERN_INFO, ha, "Setting chap\n"));
+
+ ret = qla4xxx_get_chap(ha, (char *)&boot_conn->chap.
+ target_chap_name,
+ (char *)&boot_conn->chap.target_secret,
+ idx);
+ if (ret) {
+ ql4_printk(KERN_ERR, ha, "Failed to set chap\n");
+ ret = QLA_ERROR;
+ goto exit_boot_target;
+ }
+
+ boot_conn->chap.target_chap_name_length = QL4_CHAP_MAX_NAME_LEN;
+ boot_conn->chap.target_secret_length = QL4_CHAP_MAX_SECRET_LEN;
+ }
+
+ if (BIT_4 & le16_to_cpu(fw_ddb_entry->iscsi_options)) {
+
+ DEBUG2(ql4_printk(KERN_INFO, ha, "Setting BIDI chap\n"));
+
+ ret = qla4xxx_get_bidi_chap(ha,
+ (char *)&boot_conn->chap.intr_chap_name,
+ (char *)&boot_conn->chap.intr_secret);
+
+ if (ret) {
+ ql4_printk(KERN_ERR, ha, "Failed to set BIDI chap\n");
+ ret = QLA_ERROR;
+ goto exit_boot_target;
+ }
+
+ boot_conn->chap.intr_chap_name_length = QL4_CHAP_MAX_NAME_LEN;
+ boot_conn->chap.intr_secret_length = QL4_CHAP_MAX_SECRET_LEN;
+ }
+
+exit_boot_target:
+ dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ fw_ddb_entry, fw_ddb_entry_dma);
+ return ret;
+}
+
+static int qla4xxx_get_boot_info(struct scsi_qla_host *ha)
+{
+ uint16_t ddb_index[2];
+ int ret = QLA_ERROR;
+ int rval;
+
+ memset(ddb_index, 0, sizeof(ddb_index));
+ ddb_index[0] = 0xffff;
+ ddb_index[1] = 0xffff;
+ ret = get_fw_boot_info(ha, ddb_index);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "%s: Failed to set boot info.\n", __func__));
+ return ret;
+ }
+
+ if (ddb_index[0] == 0xffff)
+ goto sec_target;
+
+ rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_pri_sess),
+ ddb_index[0]);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get "
+ "primary target\n", __func__));
+ } else
+ ret = QLA_SUCCESS;
+
+sec_target:
+ if (ddb_index[1] == 0xffff)
+ goto exit_get_boot_info;
+
+ rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_sec_sess),
+ ddb_index[1]);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get "
+ "secondary target\n", __func__));
+ } else
+ ret = QLA_SUCCESS;
+
+exit_get_boot_info:
+ return ret;
+}
+
+static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha)
+{
+ struct iscsi_boot_kobj *boot_kobj;
+
+ if (qla4xxx_get_boot_info(ha) != QLA_SUCCESS)
+ return 0;
+
+ ha->boot_kset = iscsi_boot_create_host_kset(ha->host->host_no);
+ if (!ha->boot_kset)
+ goto kset_free;
+
+ if (!scsi_host_get(ha->host))
+ goto kset_free;
+ boot_kobj = iscsi_boot_create_target(ha->boot_kset, 0, ha,
+ qla4xxx_show_boot_tgt_pri_info,
+ qla4xxx_tgt_get_attr_visibility,
+ qla4xxx_boot_release);
+ if (!boot_kobj)
+ goto put_host;
+
+ if (!scsi_host_get(ha->host))
+ goto kset_free;
+ boot_kobj = iscsi_boot_create_target(ha->boot_kset, 1, ha,
+ qla4xxx_show_boot_tgt_sec_info,
+ qla4xxx_tgt_get_attr_visibility,
+ qla4xxx_boot_release);
+ if (!boot_kobj)
+ goto put_host;
+
+ if (!scsi_host_get(ha->host))
+ goto kset_free;
+ boot_kobj = iscsi_boot_create_initiator(ha->boot_kset, 0, ha,
+ qla4xxx_show_boot_ini_info,
+ qla4xxx_ini_get_attr_visibility,
+ qla4xxx_boot_release);
+ if (!boot_kobj)
+ goto put_host;
+
+ if (!scsi_host_get(ha->host))
+ goto kset_free;
+ boot_kobj = iscsi_boot_create_ethernet(ha->boot_kset, 0, ha,
+ qla4xxx_show_boot_eth_info,
+ qla4xxx_eth_get_attr_visibility,
+ qla4xxx_boot_release);
+ if (!boot_kobj)
+ goto put_host;
+
+ return 0;
+
+put_host:
+ scsi_host_put(ha->host);
+kset_free:
+ iscsi_boot_destroy_kset(ha->boot_kset);
+ return -ENOMEM;
+}
+
+
+/**
+ * qla4xxx_create chap_list - Create CHAP list from FLASH
+ * @ha: pointer to adapter structure
+ *
+ * Read flash and make a list of CHAP entries, during login when a CHAP entry
+ * is received, it will be checked in this list. If entry exist then the CHAP
+ * entry index is set in the DDB. If CHAP entry does not exist in this list
+ * then a new entry is added in FLASH in CHAP table and the index obtained is
+ * used in the DDB.
+ **/
+static void qla4xxx_create_chap_list(struct scsi_qla_host *ha)
+{
+ int rval = 0;
+ uint8_t *chap_flash_data = NULL;
+ uint32_t offset;
+ dma_addr_t chap_dma;
+ uint32_t chap_size = 0;
+
+ if (is_qla40XX(ha))
+ chap_size = MAX_CHAP_ENTRIES_40XX *
+ sizeof(struct ql4_chap_table);
+ else /* Single region contains CHAP info for both
+ * ports which is divided into half for each port.
+ */
+ chap_size = ha->hw.flt_chap_size / 2;
+
+ chap_flash_data = dma_alloc_coherent(&ha->pdev->dev, chap_size,
+ &chap_dma, GFP_KERNEL);
+ if (!chap_flash_data) {
+ ql4_printk(KERN_ERR, ha, "No memory for chap_flash_data\n");
+ return;
+ }
+ if (is_qla40XX(ha))
+ offset = FLASH_CHAP_OFFSET;
+ else {
+ offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2);
+ if (ha->port_num == 1)
+ offset += chap_size;
+ }
+
+ rval = qla4xxx_get_flash(ha, chap_dma, offset, chap_size);
+ if (rval != QLA_SUCCESS)
+ goto exit_chap_list;
+
+ if (ha->chap_list == NULL)
+ ha->chap_list = vmalloc(chap_size);
+ if (ha->chap_list == NULL) {
+ ql4_printk(KERN_ERR, ha, "No memory for ha->chap_list\n");
+ goto exit_chap_list;
+ }
+
+ memcpy(ha->chap_list, chap_flash_data, chap_size);
+
+exit_chap_list:
+ dma_free_coherent(&ha->pdev->dev, chap_size,
+ chap_flash_data, chap_dma);
+ return;
+}
+
/**
* qla4xxx_probe_adapter - callback function to probe HBA
* @pdev: pointer to pci_dev structure
@@ -1624,7 +3200,7 @@
if (pci_enable_device(pdev))
return -1;
- host = scsi_host_alloc(&qla4xxx_driver_template, sizeof(*ha));
+ host = iscsi_host_alloc(&qla4xxx_driver_template, sizeof(*ha), 0);
if (host == NULL) {
printk(KERN_WARNING
"qla4xxx: Couldn't allocate host from scsi layer!\n");
@@ -1632,7 +3208,7 @@
}
/* Clear our data area */
- ha = (struct scsi_qla_host *) host->hostdata;
+ ha = to_qla_host(host);
memset(ha, 0, sizeof(*ha));
/* Save the information from PCI BIOS. */
@@ -1675,11 +3251,12 @@
qla4xxx_config_dma_addressing(ha);
/* Initialize lists and spinlocks. */
- INIT_LIST_HEAD(&ha->ddb_list);
INIT_LIST_HEAD(&ha->free_srb_q);
mutex_init(&ha->mbox_sem);
+ mutex_init(&ha->chap_sem);
init_completion(&ha->mbx_intr_comp);
+ init_completion(&ha->disable_acb_comp);
spin_lock_init(&ha->hardware_lock);
@@ -1692,6 +3269,27 @@
goto probe_failed;
}
+ host->cmd_per_lun = 3;
+ host->max_channel = 0;
+ host->max_lun = MAX_LUNS - 1;
+ host->max_id = MAX_TARGETS;
+ host->max_cmd_len = IOCB_MAX_CDB_LEN;
+ host->can_queue = MAX_SRBS ;
+ host->transportt = qla4xxx_scsi_transport;
+
+ ret = scsi_init_shared_tag_map(host, MAX_SRBS);
+ if (ret) {
+ ql4_printk(KERN_WARNING, ha,
+ "%s: scsi_init_shared_tag_map failed\n", __func__);
+ goto probe_failed;
+ }
+
+ pci_set_drvdata(pdev, ha);
+
+ ret = scsi_add_host(host, &pdev->dev);
+ if (ret)
+ goto probe_failed;
+
if (is_qla8022(ha))
(void) qla4_8xxx_get_flash_info(ha);
@@ -1700,7 +3298,7 @@
* firmware
* NOTE: interrupts enabled upon successful completion
*/
- status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST);
+ status = qla4xxx_initialize_adapter(ha);
while ((!test_bit(AF_ONLINE, &ha->flags)) &&
init_retry_count++ < MAX_INIT_RETRIES) {
@@ -1721,7 +3319,7 @@
if (ha->isp_ops->reset_chip(ha) == QLA_ERROR)
continue;
- status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST);
+ status = qla4xxx_initialize_adapter(ha);
}
if (!test_bit(AF_ONLINE, &ha->flags)) {
@@ -1736,24 +3334,9 @@
qla4_8xxx_idc_unlock(ha);
}
ret = -ENODEV;
- goto probe_failed;
+ goto remove_host;
}
- host->cmd_per_lun = 3;
- host->max_channel = 0;
- host->max_lun = MAX_LUNS - 1;
- host->max_id = MAX_TARGETS;
- host->max_cmd_len = IOCB_MAX_CDB_LEN;
- host->can_queue = MAX_SRBS ;
- host->transportt = qla4xxx_scsi_transport;
-
- ret = scsi_init_shared_tag_map(host, MAX_SRBS);
- if (ret) {
- ql4_printk(KERN_WARNING, ha,
- "scsi_init_shared_tag_map failed\n");
- goto probe_failed;
- }
-
/* Startup the kernel thread for this host adapter. */
DEBUG2(printk("scsi: %s: Starting kernel thread for "
"qla4xxx_dpc\n", __func__));
@@ -1762,10 +3345,18 @@
if (!ha->dpc_thread) {
ql4_printk(KERN_WARNING, ha, "Unable to start DPC thread!\n");
ret = -ENODEV;
- goto probe_failed;
+ goto remove_host;
}
INIT_WORK(&ha->dpc_work, qla4xxx_do_dpc);
+ sprintf(buf, "qla4xxx_%lu_task", ha->host_no);
+ ha->task_wq = alloc_workqueue(buf, WQ_MEM_RECLAIM, 1);
+ if (!ha->task_wq) {
+ ql4_printk(KERN_WARNING, ha, "Unable to start task thread!\n");
+ ret = -ENODEV;
+ goto remove_host;
+ }
+
/* For ISP-82XX, request_irqs is called in qla4_8xxx_load_risc
* (which is called indirectly by qla4xxx_initialize_adapter),
* so that irqs will be registered after crbinit but before
@@ -1776,7 +3367,7 @@
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to reserve "
"interrupt %d already in use.\n", pdev->irq);
- goto probe_failed;
+ goto remove_host;
}
}
@@ -1788,21 +3379,25 @@
set_bit(AF_INIT_DONE, &ha->flags);
- pci_set_drvdata(pdev, ha);
-
- ret = scsi_add_host(host, &pdev->dev);
- if (ret)
- goto probe_failed;
-
printk(KERN_INFO
" QLogic iSCSI HBA Driver version: %s\n"
" QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n",
qla4xxx_version_str, ha->pdev->device, pci_name(ha->pdev),
ha->host_no, ha->firmware_version[0], ha->firmware_version[1],
ha->patch_number, ha->build_number);
- scsi_scan_host(host);
+
+ qla4xxx_create_chap_list(ha);
+
+ if (qla4xxx_setup_boot_info(ha))
+ ql4_printk(KERN_ERR, ha, "%s:ISCSI boot info setup failed\n",
+ __func__);
+
+ qla4xxx_create_ifaces(ha);
return 0;
+remove_host:
+ scsi_remove_host(ha->host);
+
probe_failed:
qla4xxx_free_adapter(ha);
@@ -1867,8 +3462,11 @@
if (!is_qla8022(ha))
qla4xxx_prevent_other_port_reinit(ha);
- /* remove devs from iscsi_sessions to scsi_devices */
- qla4xxx_free_ddb_list(ha);
+ /* destroy iface from sysfs */
+ qla4xxx_destroy_ifaces(ha);
+
+ if (ha->boot_kset)
+ iscsi_boot_destroy_kset(ha->boot_kset);
scsi_remove_host(ha->host);
@@ -1907,10 +3505,15 @@
static int qla4xxx_slave_alloc(struct scsi_device *sdev)
{
- struct iscsi_cls_session *sess = starget_to_session(sdev->sdev_target);
- struct ddb_entry *ddb = sess->dd_data;
+ struct iscsi_cls_session *cls_sess;
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb;
int queue_depth = QL4_DEF_QDEPTH;
+ cls_sess = starget_to_session(sdev->sdev_target);
+ sess = cls_sess->dd_data;
+ ddb = sess->dd_data;
+
sdev->hostdata = ddb;
sdev->tagged_supported = 1;
@@ -2248,7 +3851,7 @@
int return_status = FAILED;
struct scsi_qla_host *ha;
- ha = (struct scsi_qla_host *) cmd->device->host->hostdata;
+ ha = to_qla_host(cmd->device->host);
if (ql4xdontresethba) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
@@ -2284,6 +3887,110 @@
return return_status;
}
+static int qla4xxx_context_reset(struct scsi_qla_host *ha)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ struct addr_ctrl_blk_def *acb = NULL;
+ uint32_t acb_len = sizeof(struct addr_ctrl_blk_def);
+ int rval = QLA_SUCCESS;
+ dma_addr_t acb_dma;
+
+ acb = dma_alloc_coherent(&ha->pdev->dev,
+ sizeof(struct addr_ctrl_blk_def),
+ &acb_dma, GFP_KERNEL);
+ if (!acb) {
+ ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n",
+ __func__);
+ rval = -ENOMEM;
+ goto exit_port_reset;
+ }
+
+ memset(acb, 0, acb_len);
+
+ rval = qla4xxx_get_acb(ha, acb_dma, PRIMARI_ACB, acb_len);
+ if (rval != QLA_SUCCESS) {
+ rval = -EIO;
+ goto exit_free_acb;
+ }
+
+ rval = qla4xxx_disable_acb(ha);
+ if (rval != QLA_SUCCESS) {
+ rval = -EIO;
+ goto exit_free_acb;
+ }
+
+ wait_for_completion_timeout(&ha->disable_acb_comp,
+ DISABLE_ACB_TOV * HZ);
+
+ rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], acb_dma);
+ if (rval != QLA_SUCCESS) {
+ rval = -EIO;
+ goto exit_free_acb;
+ }
+
+exit_free_acb:
+ dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk_def),
+ acb, acb_dma);
+exit_port_reset:
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s %s\n", __func__,
+ rval == QLA_SUCCESS ? "SUCCEEDED" : "FAILED"));
+ return rval;
+}
+
+static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type)
+{
+ struct scsi_qla_host *ha = to_qla_host(shost);
+ int rval = QLA_SUCCESS;
+
+ if (ql4xdontresethba) {
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Don't Reset HBA\n",
+ __func__));
+ rval = -EPERM;
+ goto exit_host_reset;
+ }
+
+ rval = qla4xxx_wait_for_hba_online(ha);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unable to reset host "
+ "adapter\n", __func__));
+ rval = -EIO;
+ goto exit_host_reset;
+ }
+
+ if (test_bit(DPC_RESET_HA, &ha->dpc_flags))
+ goto recover_adapter;
+
+ switch (reset_type) {
+ case SCSI_ADAPTER_RESET:
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ break;
+ case SCSI_FIRMWARE_RESET:
+ if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+ if (is_qla8022(ha))
+ /* set firmware context reset */
+ set_bit(DPC_RESET_HA_FW_CONTEXT,
+ &ha->dpc_flags);
+ else {
+ rval = qla4xxx_context_reset(ha);
+ goto exit_host_reset;
+ }
+ }
+ break;
+ }
+
+recover_adapter:
+ rval = qla4xxx_recover_adapter(ha);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: recover adapter fail\n",
+ __func__));
+ rval = -EIO;
+ }
+
+exit_host_reset:
+ return rval;
+}
+
/* PCI AER driver recovers from all correctable errors w/o
* driver intervention. For uncorrectable errors PCI AER
* driver calls the following device driver's callbacks
@@ -2360,7 +4067,8 @@
if (test_bit(AF_ONLINE, &ha->flags)) {
clear_bit(AF_ONLINE, &ha->flags);
- qla4xxx_mark_all_devices_missing(ha);
+ clear_bit(AF_LINK_UP, &ha->flags);
+ iscsi_host_for_each_session(ha->host, qla4xxx_fail_session);
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
}
@@ -2407,7 +4115,7 @@
qla4_8xxx_idc_unlock(ha);
clear_bit(AF_FW_RECOVERY, &ha->flags);
- rval = qla4xxx_initialize_adapter(ha, PRESERVE_DDB_LIST);
+ rval = qla4xxx_initialize_adapter(ha);
qla4_8xxx_idc_lock(ha);
if (rval != QLA_SUCCESS) {
@@ -2443,8 +4151,7 @@
if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
QLA82XX_DEV_READY)) {
clear_bit(AF_FW_RECOVERY, &ha->flags);
- rval = qla4xxx_initialize_adapter(ha,
- PRESERVE_DDB_LIST);
+ rval = qla4xxx_initialize_adapter(ha);
if (rval == QLA_SUCCESS) {
ret = qla4xxx_request_irqs(ha);
if (ret) {
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index 6104928..c15347d 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,4 +5,4 @@
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.02.00-k7"
+#define QLA4XXX_DRIVER_VERSION "5.02.00-k8"
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 9689d41c..e40dc1c 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -880,7 +880,7 @@
cmd->control_flags |= CFLAG_WRITE;
else
cmd->control_flags |= CFLAG_READ;
- cmd->time_out = 30;
+ cmd->time_out = Cmnd->request->timeout/HZ;
memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len);
}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index a4b9cdb..dc6131e 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -293,8 +293,16 @@
* so that we can deal with it there.
*/
if (scmd->device->expecting_cc_ua) {
- scmd->device->expecting_cc_ua = 0;
- return NEEDS_RETRY;
+ /*
+ * Because some device does not queue unit
+ * attentions correctly, we carefully check
+ * additional sense code and qualifier so as
+ * not to squash media change unit attention.
+ */
+ if (sshdr.asc != 0x28 || sshdr.ascq != 0x00) {
+ scmd->device->expecting_cc_ua = 0;
+ return NEEDS_RETRY;
+ }
}
/*
* if the device is in the process of becoming ready, we
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index e0bd3f7..04c2a27 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -246,6 +246,43 @@
static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL);
+static int check_reset_type(char *str)
+{
+ if (strncmp(str, "adapter", 10) == 0)
+ return SCSI_ADAPTER_RESET;
+ else if (strncmp(str, "firmware", 10) == 0)
+ return SCSI_FIRMWARE_RESET;
+ else
+ return 0;
+}
+
+static ssize_t
+store_host_reset(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct scsi_host_template *sht = shost->hostt;
+ int ret = -EINVAL;
+ char str[10];
+ int type;
+
+ sscanf(buf, "%s", str);
+ type = check_reset_type(str);
+
+ if (!type)
+ goto exit_store_host_reset;
+
+ if (sht->host_reset)
+ ret = sht->host_reset(shost, type);
+
+exit_store_host_reset:
+ if (ret == 0)
+ ret = count;
+ return ret;
+}
+
+static DEVICE_ATTR(host_reset, S_IWUSR, NULL, store_host_reset);
+
shost_rd_attr(unique_id, "%u\n");
shost_rd_attr(host_busy, "%hu\n");
shost_rd_attr(cmd_per_lun, "%hd\n");
@@ -272,6 +309,7 @@
&dev_attr_active_mode.attr,
&dev_attr_prot_capabilities.attr,
&dev_attr_prot_guard_type.attr,
+ &dev_attr_host_reset.attr,
NULL
};
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 3fd16d72..1bcd65a 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -23,6 +23,8 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/bsg-lib.h>
+#include <linux/idr.h>
#include <net/tcp.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
@@ -31,10 +33,7 @@
#include <scsi/scsi_transport_iscsi.h>
#include <scsi/iscsi_if.h>
#include <scsi/scsi_cmnd.h>
-
-#define ISCSI_SESSION_ATTRS 23
-#define ISCSI_CONN_ATTRS 13
-#define ISCSI_HOST_ATTRS 4
+#include <scsi/scsi_bsg_iscsi.h>
#define ISCSI_TRANSPORT_VERSION "2.0-870"
@@ -76,16 +75,14 @@
struct list_head list;
struct device dev;
- struct device_attribute *host_attrs[ISCSI_HOST_ATTRS + 1];
struct transport_container conn_cont;
- struct device_attribute *conn_attrs[ISCSI_CONN_ATTRS + 1];
struct transport_container session_cont;
- struct device_attribute *session_attrs[ISCSI_SESSION_ATTRS + 1];
};
static atomic_t iscsi_session_nr; /* sysfs session id for next new session */
static struct workqueue_struct *iscsi_eh_timer_workq;
+static DEFINE_IDA(iscsi_sess_ida);
/*
* list of registered transports and lock that must
* be held while accessing list. The iscsi_transport_lock must
@@ -270,6 +267,291 @@
}
EXPORT_SYMBOL_GPL(iscsi_lookup_endpoint);
+/*
+ * Interface to display network param to sysfs
+ */
+
+static void iscsi_iface_release(struct device *dev)
+{
+ struct iscsi_iface *iface = iscsi_dev_to_iface(dev);
+ struct device *parent = iface->dev.parent;
+
+ kfree(iface);
+ put_device(parent);
+}
+
+
+static struct class iscsi_iface_class = {
+ .name = "iscsi_iface",
+ .dev_release = iscsi_iface_release,
+};
+
+#define ISCSI_IFACE_ATTR(_prefix, _name, _mode, _show, _store) \
+struct device_attribute dev_attr_##_prefix##_##_name = \
+ __ATTR(_name, _mode, _show, _store)
+
+/* iface attrs show */
+#define iscsi_iface_attr_show(type, name, param_type, param) \
+static ssize_t \
+show_##type##_##name(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct iscsi_iface *iface = iscsi_dev_to_iface(dev); \
+ struct iscsi_transport *t = iface->transport; \
+ return t->get_iface_param(iface, param_type, param, buf); \
+} \
+
+#define iscsi_iface_net_attr(type, name, param) \
+ iscsi_iface_attr_show(type, name, ISCSI_NET_PARAM, param) \
+static ISCSI_IFACE_ATTR(type, name, S_IRUGO, show_##type##_##name, NULL);
+
+/* generic read only ipvi4 attribute */
+iscsi_iface_net_attr(ipv4_iface, ipaddress, ISCSI_NET_PARAM_IPV4_ADDR);
+iscsi_iface_net_attr(ipv4_iface, gateway, ISCSI_NET_PARAM_IPV4_GW);
+iscsi_iface_net_attr(ipv4_iface, subnet, ISCSI_NET_PARAM_IPV4_SUBNET);
+iscsi_iface_net_attr(ipv4_iface, bootproto, ISCSI_NET_PARAM_IPV4_BOOTPROTO);
+
+/* generic read only ipv6 attribute */
+iscsi_iface_net_attr(ipv6_iface, ipaddress, ISCSI_NET_PARAM_IPV6_ADDR);
+iscsi_iface_net_attr(ipv6_iface, link_local_addr, ISCSI_NET_PARAM_IPV6_LINKLOCAL);
+iscsi_iface_net_attr(ipv6_iface, router_addr, ISCSI_NET_PARAM_IPV6_ROUTER);
+iscsi_iface_net_attr(ipv6_iface, ipaddr_autocfg,
+ ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG);
+iscsi_iface_net_attr(ipv6_iface, link_local_autocfg,
+ ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG);
+
+/* common read only iface attribute */
+iscsi_iface_net_attr(iface, enabled, ISCSI_NET_PARAM_IFACE_ENABLE);
+iscsi_iface_net_attr(iface, vlan_id, ISCSI_NET_PARAM_VLAN_ID);
+iscsi_iface_net_attr(iface, vlan_priority, ISCSI_NET_PARAM_VLAN_PRIORITY);
+iscsi_iface_net_attr(iface, vlan_enabled, ISCSI_NET_PARAM_VLAN_ENABLED);
+iscsi_iface_net_attr(iface, mtu, ISCSI_NET_PARAM_MTU);
+iscsi_iface_net_attr(iface, port, ISCSI_NET_PARAM_PORT);
+
+static mode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct iscsi_iface *iface = iscsi_dev_to_iface(dev);
+ struct iscsi_transport *t = iface->transport;
+ int param;
+
+ if (attr == &dev_attr_iface_enabled.attr)
+ param = ISCSI_NET_PARAM_IFACE_ENABLE;
+ else if (attr == &dev_attr_iface_vlan_id.attr)
+ param = ISCSI_NET_PARAM_VLAN_ID;
+ else if (attr == &dev_attr_iface_vlan_priority.attr)
+ param = ISCSI_NET_PARAM_VLAN_PRIORITY;
+ else if (attr == &dev_attr_iface_vlan_enabled.attr)
+ param = ISCSI_NET_PARAM_VLAN_ENABLED;
+ else if (attr == &dev_attr_iface_mtu.attr)
+ param = ISCSI_NET_PARAM_MTU;
+ else if (attr == &dev_attr_iface_port.attr)
+ param = ISCSI_NET_PARAM_PORT;
+ else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) {
+ if (attr == &dev_attr_ipv4_iface_ipaddress.attr)
+ param = ISCSI_NET_PARAM_IPV4_ADDR;
+ else if (attr == &dev_attr_ipv4_iface_gateway.attr)
+ param = ISCSI_NET_PARAM_IPV4_GW;
+ else if (attr == &dev_attr_ipv4_iface_subnet.attr)
+ param = ISCSI_NET_PARAM_IPV4_SUBNET;
+ else if (attr == &dev_attr_ipv4_iface_bootproto.attr)
+ param = ISCSI_NET_PARAM_IPV4_BOOTPROTO;
+ else
+ return 0;
+ } else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6) {
+ if (attr == &dev_attr_ipv6_iface_ipaddress.attr)
+ param = ISCSI_NET_PARAM_IPV6_ADDR;
+ else if (attr == &dev_attr_ipv6_iface_link_local_addr.attr)
+ param = ISCSI_NET_PARAM_IPV6_LINKLOCAL;
+ else if (attr == &dev_attr_ipv6_iface_router_addr.attr)
+ param = ISCSI_NET_PARAM_IPV6_ROUTER;
+ else if (attr == &dev_attr_ipv6_iface_ipaddr_autocfg.attr)
+ param = ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG;
+ else if (attr == &dev_attr_ipv6_iface_link_local_autocfg.attr)
+ param = ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG;
+ else
+ return 0;
+ } else {
+ WARN_ONCE(1, "Invalid iface attr");
+ return 0;
+ }
+
+ return t->attr_is_visible(ISCSI_NET_PARAM, param);
+}
+
+static struct attribute *iscsi_iface_attrs[] = {
+ &dev_attr_iface_enabled.attr,
+ &dev_attr_iface_vlan_id.attr,
+ &dev_attr_iface_vlan_priority.attr,
+ &dev_attr_iface_vlan_enabled.attr,
+ &dev_attr_ipv4_iface_ipaddress.attr,
+ &dev_attr_ipv4_iface_gateway.attr,
+ &dev_attr_ipv4_iface_subnet.attr,
+ &dev_attr_ipv4_iface_bootproto.attr,
+ &dev_attr_ipv6_iface_ipaddress.attr,
+ &dev_attr_ipv6_iface_link_local_addr.attr,
+ &dev_attr_ipv6_iface_router_addr.attr,
+ &dev_attr_ipv6_iface_ipaddr_autocfg.attr,
+ &dev_attr_ipv6_iface_link_local_autocfg.attr,
+ &dev_attr_iface_mtu.attr,
+ &dev_attr_iface_port.attr,
+ NULL,
+};
+
+static struct attribute_group iscsi_iface_group = {
+ .attrs = iscsi_iface_attrs,
+ .is_visible = iscsi_iface_attr_is_visible,
+};
+
+struct iscsi_iface *
+iscsi_create_iface(struct Scsi_Host *shost, struct iscsi_transport *transport,
+ uint32_t iface_type, uint32_t iface_num, int dd_size)
+{
+ struct iscsi_iface *iface;
+ int err;
+
+ iface = kzalloc(sizeof(*iface) + dd_size, GFP_KERNEL);
+ if (!iface)
+ return NULL;
+
+ iface->transport = transport;
+ iface->iface_type = iface_type;
+ iface->iface_num = iface_num;
+ iface->dev.release = iscsi_iface_release;
+ iface->dev.class = &iscsi_iface_class;
+ /* parent reference released in iscsi_iface_release */
+ iface->dev.parent = get_device(&shost->shost_gendev);
+ if (iface_type == ISCSI_IFACE_TYPE_IPV4)
+ dev_set_name(&iface->dev, "ipv4-iface-%u-%u", shost->host_no,
+ iface_num);
+ else
+ dev_set_name(&iface->dev, "ipv6-iface-%u-%u", shost->host_no,
+ iface_num);
+
+ err = device_register(&iface->dev);
+ if (err)
+ goto free_iface;
+
+ err = sysfs_create_group(&iface->dev.kobj, &iscsi_iface_group);
+ if (err)
+ goto unreg_iface;
+
+ if (dd_size)
+ iface->dd_data = &iface[1];
+ return iface;
+
+unreg_iface:
+ device_unregister(&iface->dev);
+ return NULL;
+
+free_iface:
+ put_device(iface->dev.parent);
+ kfree(iface);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(iscsi_create_iface);
+
+void iscsi_destroy_iface(struct iscsi_iface *iface)
+{
+ sysfs_remove_group(&iface->dev.kobj, &iscsi_iface_group);
+ device_unregister(&iface->dev);
+}
+EXPORT_SYMBOL_GPL(iscsi_destroy_iface);
+
+/*
+ * BSG support
+ */
+/**
+ * iscsi_bsg_host_dispatch - Dispatch command to LLD.
+ * @job: bsg job to be processed
+ */
+static int iscsi_bsg_host_dispatch(struct bsg_job *job)
+{
+ struct Scsi_Host *shost = iscsi_job_to_shost(job);
+ struct iscsi_bsg_request *req = job->request;
+ struct iscsi_bsg_reply *reply = job->reply;
+ struct iscsi_internal *i = to_iscsi_internal(shost->transportt);
+ int cmdlen = sizeof(uint32_t); /* start with length of msgcode */
+ int ret;
+
+ /* check if we have the msgcode value at least */
+ if (job->request_len < sizeof(uint32_t)) {
+ ret = -ENOMSG;
+ goto fail_host_msg;
+ }
+
+ /* Validate the host command */
+ switch (req->msgcode) {
+ case ISCSI_BSG_HST_VENDOR:
+ cmdlen += sizeof(struct iscsi_bsg_host_vendor);
+ if ((shost->hostt->vendor_id == 0L) ||
+ (req->rqst_data.h_vendor.vendor_id !=
+ shost->hostt->vendor_id)) {
+ ret = -ESRCH;
+ goto fail_host_msg;
+ }
+ break;
+ default:
+ ret = -EBADR;
+ goto fail_host_msg;
+ }
+
+ /* check if we really have all the request data needed */
+ if (job->request_len < cmdlen) {
+ ret = -ENOMSG;
+ goto fail_host_msg;
+ }
+
+ ret = i->iscsi_transport->bsg_request(job);
+ if (!ret)
+ return 0;
+
+fail_host_msg:
+ /* return the errno failure code as the only status */
+ BUG_ON(job->reply_len < sizeof(uint32_t));
+ reply->reply_payload_rcv_len = 0;
+ reply->result = ret;
+ job->reply_len = sizeof(uint32_t);
+ bsg_job_done(job, ret, 0);
+ return 0;
+}
+
+/**
+ * iscsi_bsg_host_add - Create and add the bsg hooks to receive requests
+ * @shost: shost for iscsi_host
+ * @cls_host: iscsi_cls_host adding the structures to
+ */
+static int
+iscsi_bsg_host_add(struct Scsi_Host *shost, struct iscsi_cls_host *ihost)
+{
+ struct device *dev = &shost->shost_gendev;
+ struct iscsi_internal *i = to_iscsi_internal(shost->transportt);
+ struct request_queue *q;
+ char bsg_name[20];
+ int ret;
+
+ if (!i->iscsi_transport->bsg_request)
+ return -ENOTSUPP;
+
+ snprintf(bsg_name, sizeof(bsg_name), "iscsi_host%d", shost->host_no);
+
+ q = __scsi_alloc_queue(shost, bsg_request_fn);
+ if (!q)
+ return -ENOMEM;
+
+ ret = bsg_setup_queue(dev, q, bsg_name, iscsi_bsg_host_dispatch, 0);
+ if (ret) {
+ shost_printk(KERN_ERR, shost, "bsg interface failed to "
+ "initialize - no request queue\n");
+ blk_cleanup_queue(q);
+ return ret;
+ }
+
+ ihost->bsg_q = q;
+ return 0;
+}
+
static int iscsi_setup_host(struct transport_container *tc, struct device *dev,
struct device *cdev)
{
@@ -279,13 +561,30 @@
memset(ihost, 0, sizeof(*ihost));
atomic_set(&ihost->nr_scans, 0);
mutex_init(&ihost->mutex);
+
+ iscsi_bsg_host_add(shost, ihost);
+ /* ignore any bsg add error - we just can't do sgio */
+
+ return 0;
+}
+
+static int iscsi_remove_host(struct transport_container *tc,
+ struct device *dev, struct device *cdev)
+{
+ struct Scsi_Host *shost = dev_to_shost(dev);
+ struct iscsi_cls_host *ihost = shost->shost_data;
+
+ if (ihost->bsg_q) {
+ bsg_remove_queue(ihost->bsg_q);
+ blk_cleanup_queue(ihost->bsg_q);
+ }
return 0;
}
static DECLARE_TRANSPORT_CLASS(iscsi_host_class,
"iscsi_host",
iscsi_setup_host,
- NULL,
+ iscsi_remove_host,
NULL);
static DECLARE_TRANSPORT_CLASS(iscsi_session_class,
@@ -404,6 +703,19 @@
}
EXPORT_SYMBOL_GPL(iscsi_session_chkready);
+int iscsi_is_session_online(struct iscsi_cls_session *session)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&session->lock, flags);
+ if (session->state == ISCSI_SESSION_LOGGED_IN)
+ ret = 1;
+ spin_unlock_irqrestore(&session->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(iscsi_is_session_online);
+
static void iscsi_session_release(struct device *dev)
{
struct iscsi_cls_session *session = iscsi_dev_to_session(dev);
@@ -680,6 +992,7 @@
struct Scsi_Host *shost = iscsi_session_to_shost(session);
struct iscsi_cls_host *ihost = shost->shost_data;
unsigned long flags;
+ unsigned int target_id;
ISCSI_DBG_TRANS_SESSION(session, "Unbinding session\n");
@@ -691,10 +1004,15 @@
mutex_unlock(&ihost->mutex);
return;
}
+
+ target_id = session->target_id;
session->target_id = ISCSI_MAX_TARGET;
spin_unlock_irqrestore(&session->lock, flags);
mutex_unlock(&ihost->mutex);
+ if (session->ida_used)
+ ida_simple_remove(&iscsi_sess_ida, target_id);
+
scsi_remove_target(&session->dev);
iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION);
ISCSI_DBG_TRANS_SESSION(session, "Completed target removal\n");
@@ -735,59 +1053,36 @@
}
EXPORT_SYMBOL_GPL(iscsi_alloc_session);
-static int iscsi_get_next_target_id(struct device *dev, void *data)
-{
- struct iscsi_cls_session *session;
- unsigned long flags;
- int err = 0;
-
- if (!iscsi_is_session_dev(dev))
- return 0;
-
- session = iscsi_dev_to_session(dev);
- spin_lock_irqsave(&session->lock, flags);
- if (*((unsigned int *) data) == session->target_id)
- err = -EEXIST;
- spin_unlock_irqrestore(&session->lock, flags);
- return err;
-}
-
int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id)
{
struct Scsi_Host *shost = iscsi_session_to_shost(session);
struct iscsi_cls_host *ihost;
unsigned long flags;
- unsigned int id = target_id;
+ int id = 0;
int err;
ihost = shost->shost_data;
session->sid = atomic_add_return(1, &iscsi_session_nr);
- if (id == ISCSI_MAX_TARGET) {
- for (id = 0; id < ISCSI_MAX_TARGET; id++) {
- err = device_for_each_child(&shost->shost_gendev, &id,
- iscsi_get_next_target_id);
- if (!err)
- break;
- }
+ if (target_id == ISCSI_MAX_TARGET) {
+ id = ida_simple_get(&iscsi_sess_ida, 0, 0, GFP_KERNEL);
- if (id == ISCSI_MAX_TARGET) {
+ if (id < 0) {
iscsi_cls_session_printk(KERN_ERR, session,
- "Too many iscsi targets. Max "
- "number of targets is %d.\n",
- ISCSI_MAX_TARGET - 1);
- err = -EOVERFLOW;
- goto release_host;
+ "Failure in Target ID Allocation\n");
+ return id;
}
- }
- session->target_id = id;
+ session->target_id = (unsigned int)id;
+ session->ida_used = true;
+ } else
+ session->target_id = target_id;
dev_set_name(&session->dev, "session%u", session->sid);
err = device_add(&session->dev);
if (err) {
iscsi_cls_session_printk(KERN_ERR, session,
"could not register session's dev\n");
- goto release_host;
+ goto release_ida;
}
transport_register_device(&session->dev);
@@ -799,8 +1094,10 @@
ISCSI_DBG_TRANS_SESSION(session, "Completed session adding\n");
return 0;
-release_host:
- scsi_host_put(shost);
+release_ida:
+ if (session->ida_used)
+ ida_simple_remove(&iscsi_sess_ida, session->target_id);
+
return err;
}
EXPORT_SYMBOL_GPL(iscsi_add_session);
@@ -1144,6 +1441,40 @@
}
EXPORT_SYMBOL_GPL(iscsi_conn_error_event);
+void iscsi_conn_login_event(struct iscsi_cls_conn *conn,
+ enum iscsi_conn_state state)
+{
+ struct nlmsghdr *nlh;
+ struct sk_buff *skb;
+ struct iscsi_uevent *ev;
+ struct iscsi_internal *priv;
+ int len = NLMSG_SPACE(sizeof(*ev));
+
+ priv = iscsi_if_transport_lookup(conn->transport);
+ if (!priv)
+ return;
+
+ skb = alloc_skb(len, GFP_ATOMIC);
+ if (!skb) {
+ iscsi_cls_conn_printk(KERN_ERR, conn, "gracefully ignored "
+ "conn login (%d)\n", state);
+ return;
+ }
+
+ nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
+ ev = NLMSG_DATA(nlh);
+ ev->transport_handle = iscsi_handle(conn->transport);
+ ev->type = ISCSI_KEVENT_CONN_LOGIN_STATE;
+ ev->r.conn_login.state = state;
+ ev->r.conn_login.cid = conn->cid;
+ ev->r.conn_login.sid = iscsi_conn_get_sid(conn);
+ iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
+
+ iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn login (%d)\n",
+ state);
+}
+EXPORT_SYMBOL_GPL(iscsi_conn_login_event);
+
static int
iscsi_if_send_reply(uint32_t group, int seq, int type, int done, int multi,
void *payload, int size)
@@ -1558,6 +1889,29 @@
}
static int
+iscsi_set_iface_params(struct iscsi_transport *transport,
+ struct iscsi_uevent *ev, uint32_t len)
+{
+ char *data = (char *)ev + sizeof(*ev);
+ struct Scsi_Host *shost;
+ int err;
+
+ if (!transport->set_iface_param)
+ return -ENOSYS;
+
+ shost = scsi_host_lookup(ev->u.set_iface_params.host_no);
+ if (!shost) {
+ printk(KERN_ERR "set_iface_params could not find host no %u\n",
+ ev->u.set_iface_params.host_no);
+ return -ENODEV;
+ }
+
+ err = transport->set_iface_param(shost, data, len);
+ scsi_host_put(shost);
+ return err;
+}
+
+static int
iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
{
int err = 0;
@@ -1696,6 +2050,10 @@
case ISCSI_UEVENT_PATH_UPDATE:
err = iscsi_set_path(transport, ev);
break;
+ case ISCSI_UEVENT_SET_IFACE_PARAMS:
+ err = iscsi_set_iface_params(transport, ev,
+ nlmsg_attrlen(nlh, sizeof(*ev)));
+ break;
default:
err = -ENOSYS;
break;
@@ -1824,6 +2182,70 @@
iscsi_conn_ep_attr(address, ISCSI_PARAM_CONN_ADDRESS);
iscsi_conn_ep_attr(port, ISCSI_PARAM_CONN_PORT);
+static struct attribute *iscsi_conn_attrs[] = {
+ &dev_attr_conn_max_recv_dlength.attr,
+ &dev_attr_conn_max_xmit_dlength.attr,
+ &dev_attr_conn_header_digest.attr,
+ &dev_attr_conn_data_digest.attr,
+ &dev_attr_conn_ifmarker.attr,
+ &dev_attr_conn_ofmarker.attr,
+ &dev_attr_conn_address.attr,
+ &dev_attr_conn_port.attr,
+ &dev_attr_conn_exp_statsn.attr,
+ &dev_attr_conn_persistent_address.attr,
+ &dev_attr_conn_persistent_port.attr,
+ &dev_attr_conn_ping_tmo.attr,
+ &dev_attr_conn_recv_tmo.attr,
+ NULL,
+};
+
+static mode_t iscsi_conn_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct device *cdev = container_of(kobj, struct device, kobj);
+ struct iscsi_cls_conn *conn = transport_class_to_conn(cdev);
+ struct iscsi_transport *t = conn->transport;
+ int param;
+
+ if (attr == &dev_attr_conn_max_recv_dlength.attr)
+ param = ISCSI_PARAM_MAX_RECV_DLENGTH;
+ else if (attr == &dev_attr_conn_max_xmit_dlength.attr)
+ param = ISCSI_PARAM_MAX_XMIT_DLENGTH;
+ else if (attr == &dev_attr_conn_header_digest.attr)
+ param = ISCSI_PARAM_HDRDGST_EN;
+ else if (attr == &dev_attr_conn_data_digest.attr)
+ param = ISCSI_PARAM_DATADGST_EN;
+ else if (attr == &dev_attr_conn_ifmarker.attr)
+ param = ISCSI_PARAM_IFMARKER_EN;
+ else if (attr == &dev_attr_conn_ofmarker.attr)
+ param = ISCSI_PARAM_OFMARKER_EN;
+ else if (attr == &dev_attr_conn_address.attr)
+ param = ISCSI_PARAM_CONN_ADDRESS;
+ else if (attr == &dev_attr_conn_port.attr)
+ param = ISCSI_PARAM_CONN_PORT;
+ else if (attr == &dev_attr_conn_exp_statsn.attr)
+ param = ISCSI_PARAM_EXP_STATSN;
+ else if (attr == &dev_attr_conn_persistent_address.attr)
+ param = ISCSI_PARAM_PERSISTENT_ADDRESS;
+ else if (attr == &dev_attr_conn_persistent_port.attr)
+ param = ISCSI_PARAM_PERSISTENT_PORT;
+ else if (attr == &dev_attr_conn_ping_tmo.attr)
+ param = ISCSI_PARAM_PING_TMO;
+ else if (attr == &dev_attr_conn_recv_tmo.attr)
+ param = ISCSI_PARAM_RECV_TMO;
+ else {
+ WARN_ONCE(1, "Invalid conn attr");
+ return 0;
+ }
+
+ return t->attr_is_visible(ISCSI_PARAM, param);
+}
+
+static struct attribute_group iscsi_conn_group = {
+ .attrs = iscsi_conn_attrs,
+ .is_visible = iscsi_conn_attr_is_visible,
+};
+
/*
* iSCSI session attrs
*/
@@ -1845,7 +2267,6 @@
iscsi_session_attr_show(param, perm) \
static ISCSI_CLASS_ATTR(sess, field, S_IRUGO, show_session_param_##param, \
NULL);
-
iscsi_session_attr(targetname, ISCSI_PARAM_TARGET_NAME, 0);
iscsi_session_attr(initial_r2t, ISCSI_PARAM_INITIAL_R2T_EN, 0);
iscsi_session_attr(max_outstanding_r2t, ISCSI_PARAM_MAX_R2T, 0);
@@ -1922,6 +2343,100 @@
store_priv_session_##field)
iscsi_priv_session_rw_attr(recovery_tmo, "%d");
+static struct attribute *iscsi_session_attrs[] = {
+ &dev_attr_sess_initial_r2t.attr,
+ &dev_attr_sess_max_outstanding_r2t.attr,
+ &dev_attr_sess_immediate_data.attr,
+ &dev_attr_sess_first_burst_len.attr,
+ &dev_attr_sess_max_burst_len.attr,
+ &dev_attr_sess_data_pdu_in_order.attr,
+ &dev_attr_sess_data_seq_in_order.attr,
+ &dev_attr_sess_erl.attr,
+ &dev_attr_sess_targetname.attr,
+ &dev_attr_sess_tpgt.attr,
+ &dev_attr_sess_password.attr,
+ &dev_attr_sess_password_in.attr,
+ &dev_attr_sess_username.attr,
+ &dev_attr_sess_username_in.attr,
+ &dev_attr_sess_fast_abort.attr,
+ &dev_attr_sess_abort_tmo.attr,
+ &dev_attr_sess_lu_reset_tmo.attr,
+ &dev_attr_sess_tgt_reset_tmo.attr,
+ &dev_attr_sess_ifacename.attr,
+ &dev_attr_sess_initiatorname.attr,
+ &dev_attr_sess_targetalias.attr,
+ &dev_attr_priv_sess_recovery_tmo.attr,
+ &dev_attr_priv_sess_state.attr,
+ NULL,
+};
+
+static mode_t iscsi_session_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct device *cdev = container_of(kobj, struct device, kobj);
+ struct iscsi_cls_session *session = transport_class_to_session(cdev);
+ struct iscsi_transport *t = session->transport;
+ int param;
+
+ if (attr == &dev_attr_sess_initial_r2t.attr)
+ param = ISCSI_PARAM_INITIAL_R2T_EN;
+ else if (attr == &dev_attr_sess_max_outstanding_r2t.attr)
+ param = ISCSI_PARAM_MAX_R2T;
+ else if (attr == &dev_attr_sess_immediate_data.attr)
+ param = ISCSI_PARAM_IMM_DATA_EN;
+ else if (attr == &dev_attr_sess_first_burst_len.attr)
+ param = ISCSI_PARAM_FIRST_BURST;
+ else if (attr == &dev_attr_sess_max_burst_len.attr)
+ param = ISCSI_PARAM_MAX_BURST;
+ else if (attr == &dev_attr_sess_data_pdu_in_order.attr)
+ param = ISCSI_PARAM_PDU_INORDER_EN;
+ else if (attr == &dev_attr_sess_data_seq_in_order.attr)
+ param = ISCSI_PARAM_DATASEQ_INORDER_EN;
+ else if (attr == &dev_attr_sess_erl.attr)
+ param = ISCSI_PARAM_ERL;
+ else if (attr == &dev_attr_sess_targetname.attr)
+ param = ISCSI_PARAM_TARGET_NAME;
+ else if (attr == &dev_attr_sess_tpgt.attr)
+ param = ISCSI_PARAM_TPGT;
+ else if (attr == &dev_attr_sess_password.attr)
+ param = ISCSI_PARAM_USERNAME;
+ else if (attr == &dev_attr_sess_password_in.attr)
+ param = ISCSI_PARAM_USERNAME_IN;
+ else if (attr == &dev_attr_sess_username.attr)
+ param = ISCSI_PARAM_PASSWORD;
+ else if (attr == &dev_attr_sess_username_in.attr)
+ param = ISCSI_PARAM_PASSWORD_IN;
+ else if (attr == &dev_attr_sess_fast_abort.attr)
+ param = ISCSI_PARAM_FAST_ABORT;
+ else if (attr == &dev_attr_sess_abort_tmo.attr)
+ param = ISCSI_PARAM_ABORT_TMO;
+ else if (attr == &dev_attr_sess_lu_reset_tmo.attr)
+ param = ISCSI_PARAM_LU_RESET_TMO;
+ else if (attr == &dev_attr_sess_tgt_reset_tmo.attr)
+ param = ISCSI_PARAM_TGT_RESET_TMO;
+ else if (attr == &dev_attr_sess_ifacename.attr)
+ param = ISCSI_PARAM_IFACE_NAME;
+ else if (attr == &dev_attr_sess_initiatorname.attr)
+ param = ISCSI_PARAM_INITIATOR_NAME;
+ else if (attr == &dev_attr_sess_targetalias.attr)
+ param = ISCSI_PARAM_TARGET_ALIAS;
+ else if (attr == &dev_attr_priv_sess_recovery_tmo.attr)
+ return S_IRUGO | S_IWUSR;
+ else if (attr == &dev_attr_priv_sess_state.attr)
+ return S_IRUGO;
+ else {
+ WARN_ONCE(1, "Invalid session attr");
+ return 0;
+ }
+
+ return t->attr_is_visible(ISCSI_PARAM, param);
+}
+
+static struct attribute_group iscsi_session_group = {
+ .attrs = iscsi_session_attrs,
+ .is_visible = iscsi_session_attr_is_visible,
+};
+
/*
* iSCSI host attrs
*/
@@ -1945,41 +2460,42 @@
iscsi_host_attr(ipaddress, ISCSI_HOST_PARAM_IPADDRESS);
iscsi_host_attr(initiatorname, ISCSI_HOST_PARAM_INITIATOR_NAME);
-#define SETUP_PRIV_SESSION_RD_ATTR(field) \
-do { \
- priv->session_attrs[count] = &dev_attr_priv_sess_##field; \
- count++; \
-} while (0)
+static struct attribute *iscsi_host_attrs[] = {
+ &dev_attr_host_netdev.attr,
+ &dev_attr_host_hwaddress.attr,
+ &dev_attr_host_ipaddress.attr,
+ &dev_attr_host_initiatorname.attr,
+ NULL,
+};
-#define SETUP_PRIV_SESSION_RW_ATTR(field) \
-do { \
- priv->session_attrs[count] = &dev_attr_priv_sess_##field; \
- count++; \
-} while (0)
+static mode_t iscsi_host_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct device *cdev = container_of(kobj, struct device, kobj);
+ struct Scsi_Host *shost = transport_class_to_shost(cdev);
+ struct iscsi_internal *priv = to_iscsi_internal(shost->transportt);
+ int param;
-#define SETUP_SESSION_RD_ATTR(field, param_flag) \
-do { \
- if (tt->param_mask & param_flag) { \
- priv->session_attrs[count] = &dev_attr_sess_##field; \
- count++; \
- } \
-} while (0)
+ if (attr == &dev_attr_host_netdev.attr)
+ param = ISCSI_HOST_PARAM_NETDEV_NAME;
+ else if (attr == &dev_attr_host_hwaddress.attr)
+ param = ISCSI_HOST_PARAM_HWADDRESS;
+ else if (attr == &dev_attr_host_ipaddress.attr)
+ param = ISCSI_HOST_PARAM_IPADDRESS;
+ else if (attr == &dev_attr_host_initiatorname.attr)
+ param = ISCSI_HOST_PARAM_INITIATOR_NAME;
+ else {
+ WARN_ONCE(1, "Invalid host attr");
+ return 0;
+ }
-#define SETUP_CONN_RD_ATTR(field, param_flag) \
-do { \
- if (tt->param_mask & param_flag) { \
- priv->conn_attrs[count] = &dev_attr_conn_##field; \
- count++; \
- } \
-} while (0)
+ return priv->iscsi_transport->attr_is_visible(ISCSI_HOST_PARAM, param);
+}
-#define SETUP_HOST_RD_ATTR(field, param_flag) \
-do { \
- if (tt->host_param_mask & param_flag) { \
- priv->host_attrs[count] = &dev_attr_host_##field; \
- count++; \
- } \
-} while (0)
+static struct attribute_group iscsi_host_group = {
+ .attrs = iscsi_host_attrs,
+ .is_visible = iscsi_host_attr_is_visible,
+};
static int iscsi_session_match(struct attribute_container *cont,
struct device *dev)
@@ -2051,7 +2567,7 @@
{
struct iscsi_internal *priv;
unsigned long flags;
- int count = 0, err;
+ int err;
BUG_ON(!tt);
@@ -2078,77 +2594,24 @@
goto unregister_dev;
/* host parameters */
- priv->t.host_attrs.ac.attrs = &priv->host_attrs[0];
priv->t.host_attrs.ac.class = &iscsi_host_class.class;
priv->t.host_attrs.ac.match = iscsi_host_match;
+ priv->t.host_attrs.ac.grp = &iscsi_host_group;
priv->t.host_size = sizeof(struct iscsi_cls_host);
transport_container_register(&priv->t.host_attrs);
- SETUP_HOST_RD_ATTR(netdev, ISCSI_HOST_NETDEV_NAME);
- SETUP_HOST_RD_ATTR(ipaddress, ISCSI_HOST_IPADDRESS);
- SETUP_HOST_RD_ATTR(hwaddress, ISCSI_HOST_HWADDRESS);
- SETUP_HOST_RD_ATTR(initiatorname, ISCSI_HOST_INITIATOR_NAME);
- BUG_ON(count > ISCSI_HOST_ATTRS);
- priv->host_attrs[count] = NULL;
- count = 0;
-
/* connection parameters */
- priv->conn_cont.ac.attrs = &priv->conn_attrs[0];
priv->conn_cont.ac.class = &iscsi_connection_class.class;
priv->conn_cont.ac.match = iscsi_conn_match;
+ priv->conn_cont.ac.grp = &iscsi_conn_group;
transport_container_register(&priv->conn_cont);
- SETUP_CONN_RD_ATTR(max_recv_dlength, ISCSI_MAX_RECV_DLENGTH);
- SETUP_CONN_RD_ATTR(max_xmit_dlength, ISCSI_MAX_XMIT_DLENGTH);
- SETUP_CONN_RD_ATTR(header_digest, ISCSI_HDRDGST_EN);
- SETUP_CONN_RD_ATTR(data_digest, ISCSI_DATADGST_EN);
- SETUP_CONN_RD_ATTR(ifmarker, ISCSI_IFMARKER_EN);
- SETUP_CONN_RD_ATTR(ofmarker, ISCSI_OFMARKER_EN);
- SETUP_CONN_RD_ATTR(address, ISCSI_CONN_ADDRESS);
- SETUP_CONN_RD_ATTR(port, ISCSI_CONN_PORT);
- SETUP_CONN_RD_ATTR(exp_statsn, ISCSI_EXP_STATSN);
- SETUP_CONN_RD_ATTR(persistent_address, ISCSI_PERSISTENT_ADDRESS);
- SETUP_CONN_RD_ATTR(persistent_port, ISCSI_PERSISTENT_PORT);
- SETUP_CONN_RD_ATTR(ping_tmo, ISCSI_PING_TMO);
- SETUP_CONN_RD_ATTR(recv_tmo, ISCSI_RECV_TMO);
-
- BUG_ON(count > ISCSI_CONN_ATTRS);
- priv->conn_attrs[count] = NULL;
- count = 0;
-
/* session parameters */
- priv->session_cont.ac.attrs = &priv->session_attrs[0];
priv->session_cont.ac.class = &iscsi_session_class.class;
priv->session_cont.ac.match = iscsi_session_match;
+ priv->session_cont.ac.grp = &iscsi_session_group;
transport_container_register(&priv->session_cont);
- SETUP_SESSION_RD_ATTR(initial_r2t, ISCSI_INITIAL_R2T_EN);
- SETUP_SESSION_RD_ATTR(max_outstanding_r2t, ISCSI_MAX_R2T);
- SETUP_SESSION_RD_ATTR(immediate_data, ISCSI_IMM_DATA_EN);
- SETUP_SESSION_RD_ATTR(first_burst_len, ISCSI_FIRST_BURST);
- SETUP_SESSION_RD_ATTR(max_burst_len, ISCSI_MAX_BURST);
- SETUP_SESSION_RD_ATTR(data_pdu_in_order, ISCSI_PDU_INORDER_EN);
- SETUP_SESSION_RD_ATTR(data_seq_in_order, ISCSI_DATASEQ_INORDER_EN);
- SETUP_SESSION_RD_ATTR(erl, ISCSI_ERL);
- SETUP_SESSION_RD_ATTR(targetname, ISCSI_TARGET_NAME);
- SETUP_SESSION_RD_ATTR(tpgt, ISCSI_TPGT);
- SETUP_SESSION_RD_ATTR(password, ISCSI_USERNAME);
- SETUP_SESSION_RD_ATTR(password_in, ISCSI_USERNAME_IN);
- SETUP_SESSION_RD_ATTR(username, ISCSI_PASSWORD);
- SETUP_SESSION_RD_ATTR(username_in, ISCSI_PASSWORD_IN);
- SETUP_SESSION_RD_ATTR(fast_abort, ISCSI_FAST_ABORT);
- SETUP_SESSION_RD_ATTR(abort_tmo, ISCSI_ABORT_TMO);
- SETUP_SESSION_RD_ATTR(lu_reset_tmo,ISCSI_LU_RESET_TMO);
- SETUP_SESSION_RD_ATTR(tgt_reset_tmo,ISCSI_TGT_RESET_TMO);
- SETUP_SESSION_RD_ATTR(ifacename, ISCSI_IFACE_NAME);
- SETUP_SESSION_RD_ATTR(initiatorname, ISCSI_INITIATOR_NAME);
- SETUP_SESSION_RD_ATTR(targetalias, ISCSI_TARGET_ALIAS);
- SETUP_PRIV_SESSION_RW_ATTR(recovery_tmo);
- SETUP_PRIV_SESSION_RD_ATTR(state);
-
- BUG_ON(count > ISCSI_SESSION_ATTRS);
- priv->session_attrs[count] = NULL;
-
spin_lock_irqsave(&iscsi_transport_lock, flags);
list_add(&priv->list, &iscsi_transports);
spin_unlock_irqrestore(&iscsi_transport_lock, flags);
@@ -2210,10 +2673,14 @@
if (err)
goto unregister_transport_class;
- err = transport_class_register(&iscsi_host_class);
+ err = class_register(&iscsi_iface_class);
if (err)
goto unregister_endpoint_class;
+ err = transport_class_register(&iscsi_host_class);
+ if (err)
+ goto unregister_iface_class;
+
err = transport_class_register(&iscsi_connection_class);
if (err)
goto unregister_host_class;
@@ -2243,6 +2710,8 @@
transport_class_unregister(&iscsi_connection_class);
unregister_host_class:
transport_class_unregister(&iscsi_host_class);
+unregister_iface_class:
+ class_unregister(&iscsi_iface_class);
unregister_endpoint_class:
class_unregister(&iscsi_endpoint_class);
unregister_transport_class:
@@ -2258,6 +2727,7 @@
transport_class_unregister(&iscsi_session_class);
transport_class_unregister(&iscsi_host_class);
class_unregister(&iscsi_endpoint_class);
+ class_unregister(&iscsi_iface_class);
class_unregister(&iscsi_transport_class);
}
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index c6fcf76..9d9330a 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -1545,8 +1545,14 @@
if (identify->device_type == SAS_END_DEVICE &&
rphy->scsi_target_id != -1) {
- scsi_scan_target(&rphy->dev, 0,
- rphy->scsi_target_id, SCAN_WILD_CARD, 0);
+ int lun;
+
+ if (identify->target_port_protocols & SAS_PROTOCOL_SSP)
+ lun = SCAN_WILD_CARD;
+ else
+ lun = 0;
+
+ scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, lun, 0);
}
return 0;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 953773c..a7942e5 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1066,12 +1066,13 @@
unsigned int cmd, unsigned long arg)
{
struct gendisk *disk = bdev->bd_disk;
- struct scsi_device *sdp = scsi_disk(disk)->device;
+ struct scsi_disk *sdkp = scsi_disk(disk);
+ struct scsi_device *sdp = sdkp->device;
void __user *p = (void __user *)arg;
int error;
- SCSI_LOG_IOCTL(1, printk("sd_ioctl: disk=%s, cmd=0x%x\n",
- disk->disk_name, cmd));
+ SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
+ "cmd=0x%x\n", disk->disk_name, cmd));
/*
* If we are in the middle of error recovery, don't let anyone
diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c
index 33b2ed4..e0ada37 100644
--- a/drivers/sh/intc/chip.c
+++ b/drivers/sh/intc/chip.c
@@ -202,11 +202,16 @@
if (!value)
return -EINVAL;
+ value &= ~SENSE_VALID_FLAG;
+
ihp = intc_find_irq(d->sense, d->nr_sense, irq);
if (ihp) {
+ /* PINT has 2-bit sense registers, should fail on EDGE_BOTH */
+ if (value >= (1 << _INTC_WIDTH(ihp->handle)))
+ return -EINVAL;
+
addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
- intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle,
- value & ~SENSE_VALID_FLAG);
+ intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
}
return 0;
diff --git a/drivers/sh/intc/userimask.c b/drivers/sh/intc/userimask.c
index e32304b..56bf933 100644
--- a/drivers/sh/intc/userimask.c
+++ b/drivers/sh/intc/userimask.c
@@ -13,6 +13,7 @@
#include <linux/sysdev.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/stat.h>
#include <asm/sizes.h>
#include "internals.h"
diff --git a/drivers/sh/pfc.c b/drivers/sh/pfc.c
index 75934e3..e67fe17 100644
--- a/drivers/sh/pfc.c
+++ b/drivers/sh/pfc.c
@@ -217,7 +217,7 @@
if (!r_width)
break;
- for (n = 0; n < (r_width / f_width) * 1 << f_width; n++) {
+ for (n = 0; n < (r_width / f_width) * (1 << f_width); n++) {
if (config_reg->enum_ids[n] == enum_id) {
*crp = config_reg;
*indexp = n;
@@ -577,6 +577,32 @@
sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
}
+static int sh_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct pinmux_info *gpioc = chip_to_pinmux(chip);
+ pinmux_enum_t enum_id;
+ pinmux_enum_t *enum_ids;
+ int i, k, pos;
+
+ pos = 0;
+ enum_id = 0;
+ while (1) {
+ pos = get_gpio_enum_id(gpioc, offset, pos, &enum_id);
+ if (pos <= 0 || !enum_id)
+ break;
+
+ for (i = 0; i < gpioc->gpio_irq_size; i++) {
+ enum_ids = gpioc->gpio_irq[i].enum_ids;
+ for (k = 0; enum_ids[k]; k++) {
+ if (enum_ids[k] == enum_id)
+ return gpioc->gpio_irq[i].irq;
+ }
+ }
+ }
+
+ return -ENOSYS;
+}
+
int register_pinmux(struct pinmux_info *pip)
{
struct gpio_chip *chip = &pip->chip;
@@ -592,6 +618,7 @@
chip->get = sh_gpio_get;
chip->direction_output = sh_gpio_direction_output;
chip->set = sh_gpio_set;
+ chip->to_irq = sh_gpio_to_irq;
WARN_ON(pip->first_gpio != 0); /* needs testing */
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 4813a63..881c196 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -320,18 +320,7 @@
.of_match_table = altera_spi_match,
},
};
-
-static int __init altera_spi_init(void)
-{
- return platform_driver_register(&altera_spi_driver);
-}
-module_init(altera_spi_init);
-
-static void __exit altera_spi_exit(void)
-{
- platform_driver_unregister(&altera_spi_driver);
-}
-module_exit(altera_spi_exit);
+module_platform_driver(altera_spi_driver);
MODULE_DESCRIPTION("Altera SPI driver");
MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index 03019bf..024b48a 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -273,18 +273,7 @@
.owner = THIS_MODULE,
},
};
-
-static __init int ath79_spi_init(void)
-{
- return platform_driver_register(&ath79_spi_driver);
-}
-module_init(ath79_spi_init);
-
-static __exit void ath79_spi_exit(void)
-{
- platform_driver_unregister(&ath79_spi_driver);
-}
-module_exit(ath79_spi_exit);
+module_platform_driver(ath79_spi_driver);
MODULE_DESCRIPTION("SPI controller driver for Atheros AR71XX/AR724X/AR913X");
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 82dee9a..79665e2 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -22,7 +22,7 @@
#include <asm/io.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cpu.h>
/* SPI register offsets */
@@ -1074,18 +1074,7 @@
.resume = atmel_spi_resume,
.remove = __exit_p(atmel_spi_remove),
};
-
-static int __init atmel_spi_init(void)
-{
- return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
-}
-module_init(atmel_spi_init);
-
-static void __exit atmel_spi_exit(void)
-{
- platform_driver_unregister(&atmel_spi_driver);
-}
-module_exit(atmel_spi_exit);
+module_platform_driver(atmel_spi_driver);
MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index e557ff6..248a2cc 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -938,15 +938,4 @@
.suspend = bfin_sport_spi_suspend,
.resume = bfin_sport_spi_resume,
};
-
-static int __init bfin_sport_spi_init(void)
-{
- return platform_driver_register(&bfin_sport_spi_driver);
-}
-module_init(bfin_sport_spi_init);
-
-static void __exit bfin_sport_spi_exit(void)
-{
- platform_driver_unregister(&bfin_sport_spi_driver);
-}
-module_exit(bfin_sport_spi_exit);
+module_platform_driver(bfin_sport_spi_driver);
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index b8d25f2..3b83ff8 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -1098,7 +1098,7 @@
if (chip->pio_interrupt && !drv_data->irq_requested) {
ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler,
- IRQF_DISABLED, "BFIN_SPI", drv_data);
+ 0, "BFIN_SPI", drv_data);
if (ret) {
dev_err(&spi->dev, "Unable to register spi IRQ\n");
goto error;
diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c
index ae2cd1c..6eee64a 100644
--- a/drivers/spi/spi-coldfire-qspi.c
+++ b/drivers/spi/spi-coldfire-qspi.c
@@ -487,7 +487,7 @@
goto fail2;
}
- status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, IRQF_DISABLED,
+ status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, 0,
pdev->name, mcfqspi);
if (status) {
dev_dbg(&pdev->dev, "request_irq failed\n");
@@ -621,20 +621,10 @@
.driver.name = DRIVER_NAME,
.driver.owner = THIS_MODULE,
.driver.pm = MCFQSPI_DEV_PM_OPS,
+ .probe = mcfqspi_probe,
.remove = __devexit_p(mcfqspi_remove),
};
-
-static int __init mcfqspi_init(void)
-{
- return platform_driver_probe(&mcfqspi_driver, mcfqspi_probe);
-}
-module_init(mcfqspi_init);
-
-static void __exit mcfqspi_exit(void)
-{
- platform_driver_unregister(&mcfqspi_driver);
-}
-module_exit(mcfqspi_exit);
+module_platform_driver(mcfqspi_driver);
MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
MODULE_DESCRIPTION("Coldfire QSPI Controller Driver");
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 1f0ed80..31bfba8 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -799,7 +799,7 @@
* It will invoke spi_bitbang_start to create work queue so that client driver
* can register transfer method to work queue.
*/
-static int davinci_spi_probe(struct platform_device *pdev)
+static int __devinit davinci_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct davinci_spi *dspi;
@@ -984,7 +984,7 @@
* It will also call spi_bitbang_stop to destroy the work queue which was
* created by spi_bitbang_start.
*/
-static int __exit davinci_spi_remove(struct platform_device *pdev)
+static int __devexit davinci_spi_remove(struct platform_device *pdev)
{
struct davinci_spi *dspi;
struct spi_master *master;
@@ -1011,20 +1011,10 @@
.name = "spi_davinci",
.owner = THIS_MODULE,
},
- .remove = __exit_p(davinci_spi_remove),
+ .probe = davinci_spi_probe,
+ .remove = __devexit_p(davinci_spi_remove),
};
-
-static int __init davinci_spi_init(void)
-{
- return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe);
-}
-module_init(davinci_spi_init);
-
-static void __exit davinci_spi_exit(void)
-{
- platform_driver_unregister(&davinci_spi_driver);
-}
-module_exit(davinci_spi_exit);
+module_platform_driver(davinci_spi_driver);
MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 130e555..e743a45 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -116,13 +116,13 @@
/* 1. setup DMA related registers */
if (cs_change) {
spi_enable_chip(dws, 0);
- dw_writew(dws, dmardlr, 0xf);
- dw_writew(dws, dmatdlr, 0x10);
+ dw_writew(dws, DW_SPI_DMARDLR, 0xf);
+ dw_writew(dws, DW_SPI_DMATDLR, 0x10);
if (dws->tx_dma)
dma_ctrl |= 0x2;
if (dws->rx_dma)
dma_ctrl |= 0x1;
- dw_writew(dws, dmacr, dma_ctrl);
+ dw_writew(dws, DW_SPI_DMACR, dma_ctrl);
spi_enable_chip(dws, 1);
}
@@ -200,7 +200,8 @@
int dw_spi_mid_init(struct dw_spi *dws)
{
- u32 *clk_reg, clk_cdiv;
+ void __iomem *clk_reg;
+ u32 clk_cdiv;
clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16);
if (!clk_reg)
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 34eb665..fac399c 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -127,24 +127,14 @@
}
static struct platform_driver dw_spi_mmio_driver = {
+ .probe = dw_spi_mmio_probe,
.remove = __devexit_p(dw_spi_mmio_remove),
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
};
-
-static int __init dw_spi_mmio_init(void)
-{
- return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe);
-}
-module_init(dw_spi_mmio_init);
-
-static void __exit dw_spi_mmio_exit(void)
-{
- platform_driver_unregister(&dw_spi_mmio_driver);
-}
-module_exit(dw_spi_mmio_exit);
+module_platform_driver(dw_spi_mmio_driver);
MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>");
MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core");
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 857cd30..296d94f 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -88,35 +88,35 @@
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
"=================================\n");
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0));
+ "CTRL0: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL0));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1));
+ "CTRL1: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL1));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "SSIENR: \t0x%08x\n", dw_readl(dws, ssienr));
+ "SSIENR: \t0x%08x\n", dw_readl(dws, DW_SPI_SSIENR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "SER: \t\t0x%08x\n", dw_readl(dws, ser));
+ "SER: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SER));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr));
+ "BAUDR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_BAUDR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr));
+ "TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFLTR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr));
+ "RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFLTR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr));
+ "TXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_TXFLR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr));
+ "RXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_RXFLR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "SR: \t\t0x%08x\n", dw_readl(dws, sr));
+ "SR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "IMR: \t\t0x%08x\n", dw_readl(dws, imr));
+ "IMR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_IMR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "ISR: \t\t0x%08x\n", dw_readl(dws, isr));
+ "ISR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_ISR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr));
+ "DMACR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_DMACR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr));
+ "DMATDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMATDLR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
- "DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr));
+ "DMARDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMARDLR));
len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
"=================================\n");
@@ -166,7 +166,7 @@
u32 tx_left, tx_room, rxtx_gap;
tx_left = (dws->tx_end - dws->tx) / dws->n_bytes;
- tx_room = dws->fifo_len - dw_readw(dws, txflr);
+ tx_room = dws->fifo_len - dw_readw(dws, DW_SPI_TXFLR);
/*
* Another concern is about the tx/rx mismatch, we
@@ -187,7 +187,7 @@
{
u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes;
- return min(rx_left, (u32)dw_readw(dws, rxflr));
+ return min(rx_left, (u32)dw_readw(dws, DW_SPI_RXFLR));
}
static void dw_writer(struct dw_spi *dws)
@@ -203,7 +203,7 @@
else
txw = *(u16 *)(dws->tx);
}
- dw_writew(dws, dr, txw);
+ dw_writew(dws, DW_SPI_DR, txw);
dws->tx += dws->n_bytes;
}
}
@@ -214,7 +214,7 @@
u16 rxw;
while (max--) {
- rxw = dw_readw(dws, dr);
+ rxw = dw_readw(dws, DW_SPI_DR);
/* Care rx only if the transfer's original "rx" is not null */
if (dws->rx_end - dws->len) {
if (dws->n_bytes == 1)
@@ -322,13 +322,13 @@
static irqreturn_t interrupt_transfer(struct dw_spi *dws)
{
- u16 irq_status = dw_readw(dws, isr);
+ u16 irq_status = dw_readw(dws, DW_SPI_ISR);
/* Error handling */
if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
- dw_readw(dws, txoicr);
- dw_readw(dws, rxoicr);
- dw_readw(dws, rxuicr);
+ dw_readw(dws, DW_SPI_TXOICR);
+ dw_readw(dws, DW_SPI_RXOICR);
+ dw_readw(dws, DW_SPI_RXUICR);
int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun");
return IRQ_HANDLED;
}
@@ -352,7 +352,7 @@
static irqreturn_t dw_spi_irq(int irq, void *dev_id)
{
struct dw_spi *dws = dev_id;
- u16 irq_status = dw_readw(dws, isr) & 0x3f;
+ u16 irq_status = dw_readw(dws, DW_SPI_ISR) & 0x3f;
if (!irq_status)
return IRQ_NONE;
@@ -520,11 +520,11 @@
* 2. clk_div is changed
* 3. control value changes
*/
- if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) {
+ if (dw_readw(dws, DW_SPI_CTRL0) != cr0 || cs_change || clk_div || imask) {
spi_enable_chip(dws, 0);
- if (dw_readw(dws, ctrl0) != cr0)
- dw_writew(dws, ctrl0, cr0);
+ if (dw_readw(dws, DW_SPI_CTRL0) != cr0)
+ dw_writew(dws, DW_SPI_CTRL0, cr0);
spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
spi_chip_sel(dws, spi->chip_select);
@@ -534,7 +534,7 @@
if (imask)
spi_umask_intr(dws, imask);
if (txint_level)
- dw_writew(dws, txfltr, txint_level);
+ dw_writew(dws, DW_SPI_TXFLTR, txint_level);
spi_enable_chip(dws, 1);
if (cs_change)
@@ -790,13 +790,13 @@
if (!dws->fifo_len) {
u32 fifo;
for (fifo = 2; fifo <= 257; fifo++) {
- dw_writew(dws, txfltr, fifo);
- if (fifo != dw_readw(dws, txfltr))
+ dw_writew(dws, DW_SPI_TXFLTR, fifo);
+ if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
break;
}
dws->fifo_len = (fifo == 257) ? 0 : fifo;
- dw_writew(dws, txfltr, 0);
+ dw_writew(dws, DW_SPI_TXFLTR, 0);
}
}
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 8b7b07b..9c57c07 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -4,6 +4,33 @@
#include <linux/io.h>
#include <linux/scatterlist.h>
+/* Register offsets */
+#define DW_SPI_CTRL0 0x00
+#define DW_SPI_CTRL1 0x04
+#define DW_SPI_SSIENR 0x08
+#define DW_SPI_MWCR 0x0c
+#define DW_SPI_SER 0x10
+#define DW_SPI_BAUDR 0x14
+#define DW_SPI_TXFLTR 0x18
+#define DW_SPI_RXFLTR 0x1c
+#define DW_SPI_TXFLR 0x20
+#define DW_SPI_RXFLR 0x24
+#define DW_SPI_SR 0x28
+#define DW_SPI_IMR 0x2c
+#define DW_SPI_ISR 0x30
+#define DW_SPI_RISR 0x34
+#define DW_SPI_TXOICR 0x38
+#define DW_SPI_RXOICR 0x3c
+#define DW_SPI_RXUICR 0x40
+#define DW_SPI_MSTICR 0x44
+#define DW_SPI_ICR 0x48
+#define DW_SPI_DMACR 0x4c
+#define DW_SPI_DMATDLR 0x50
+#define DW_SPI_DMARDLR 0x54
+#define DW_SPI_IDR 0x58
+#define DW_SPI_VERSION 0x5c
+#define DW_SPI_DR 0x60
+
/* Bit fields in CTRLR0 */
#define SPI_DFS_OFFSET 0
@@ -55,35 +82,6 @@
SSI_NS_MICROWIRE,
};
-struct dw_spi_reg {
- u32 ctrl0;
- u32 ctrl1;
- u32 ssienr;
- u32 mwcr;
- u32 ser;
- u32 baudr;
- u32 txfltr;
- u32 rxfltr;
- u32 txflr;
- u32 rxflr;
- u32 sr;
- u32 imr;
- u32 isr;
- u32 risr;
- u32 txoicr;
- u32 rxoicr;
- u32 rxuicr;
- u32 msticr;
- u32 icr;
- u32 dmacr;
- u32 dmatdlr;
- u32 dmardlr;
- u32 idr;
- u32 version;
- u32 dr; /* Currently oper as 32 bits,
- though only low 16 bits matters */
-} __packed;
-
struct dw_spi;
struct dw_spi_dma_ops {
int (*dma_init)(struct dw_spi *dws);
@@ -161,23 +159,34 @@
#endif
};
-#define dw_readl(dw, name) \
- __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name))
-#define dw_writel(dw, name, val) \
- __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name))
-#define dw_readw(dw, name) \
- __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name))
-#define dw_writew(dw, name, val) \
- __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name))
+static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
+{
+ return __raw_readl(dws->regs + offset);
+}
+
+static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
+{
+ __raw_writel(val, dws->regs + offset);
+}
+
+static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
+{
+ return __raw_readw(dws->regs + offset);
+}
+
+static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
+{
+ __raw_writew(val, dws->regs + offset);
+}
static inline void spi_enable_chip(struct dw_spi *dws, int enable)
{
- dw_writel(dws, ssienr, (enable ? 1 : 0));
+ dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
}
static inline void spi_set_clk(struct dw_spi *dws, u16 div)
{
- dw_writel(dws, baudr, div);
+ dw_writel(dws, DW_SPI_BAUDR, div);
}
static inline void spi_chip_sel(struct dw_spi *dws, u16 cs)
@@ -188,7 +197,7 @@
if (dws->cs_control)
dws->cs_control(1);
- dw_writel(dws, ser, 1 << cs);
+ dw_writel(dws, DW_SPI_SER, 1 << cs);
}
/* Disable IRQ bits */
@@ -196,8 +205,8 @@
{
u32 new_mask;
- new_mask = dw_readl(dws, imr) & ~mask;
- dw_writel(dws, imr, new_mask);
+ new_mask = dw_readl(dws, DW_SPI_IMR) & ~mask;
+ dw_writel(dws, DW_SPI_IMR, new_mask);
}
/* Enable IRQ bits */
@@ -205,8 +214,8 @@
{
u32 new_mask;
- new_mask = dw_readl(dws, imr) | mask;
- dw_writel(dws, imr, new_mask);
+ new_mask = dw_readl(dws, DW_SPI_IMR) | mask;
+ dw_writel(dws, DW_SPI_IMR, new_mask);
}
/*
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 1cf64547..0a282e5 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -24,6 +24,7 @@
#include <linux/dmaengine.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
@@ -1025,7 +1026,7 @@
free_page((unsigned long)espi->zeropage);
}
-static int __init ep93xx_spi_probe(struct platform_device *pdev)
+static int __devinit ep93xx_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct ep93xx_spi_info *info;
@@ -1150,7 +1151,7 @@
return error;
}
-static int __exit ep93xx_spi_remove(struct platform_device *pdev)
+static int __devexit ep93xx_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct ep93xx_spi *espi = spi_master_get_devdata(master);
@@ -1196,20 +1197,10 @@
.name = "ep93xx-spi",
.owner = THIS_MODULE,
},
- .remove = __exit_p(ep93xx_spi_remove),
+ .probe = ep93xx_spi_probe,
+ .remove = __devexit_p(ep93xx_spi_remove),
};
-
-static int __init ep93xx_spi_init(void)
-{
- return platform_driver_probe(&ep93xx_spi_driver, ep93xx_spi_probe);
-}
-module_init(ep93xx_spi_init);
-
-static void __exit ep93xx_spi_exit(void)
-{
- platform_driver_unregister(&ep93xx_spi_driver);
-}
-module_exit(ep93xx_spi_exit);
+module_platform_driver(ep93xx_spi_driver);
MODULE_DESCRIPTION("EP93xx SPI Controller driver");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 54e499d..d770f03 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -744,18 +744,7 @@
.probe = of_fsl_espi_probe,
.remove = __devexit_p(of_fsl_espi_remove),
};
-
-static int __init fsl_espi_init(void)
-{
- return platform_driver_register(&fsl_espi_driver);
-}
-module_init(fsl_espi_init);
-
-static void __exit fsl_espi_exit(void)
-{
- platform_driver_unregister(&fsl_espi_driver);
-}
-module_exit(fsl_espi_exit);
+module_platform_driver(fsl_espi_driver);
MODULE_AUTHOR("Mingkai Hu");
MODULE_DESCRIPTION("Enhanced Freescale SPI Driver");
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 0e88ab7..635ff08 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -311,7 +311,7 @@
return value;
}
-static int __init spi_gpio_probe(struct platform_device *pdev)
+static int __devinit spi_gpio_probe(struct platform_device *pdev)
{
int status;
struct spi_master *master;
@@ -379,7 +379,7 @@
return status;
}
-static int __exit spi_gpio_remove(struct platform_device *pdev)
+static int __devexit spi_gpio_remove(struct platform_device *pdev)
{
struct spi_gpio *spi_gpio;
struct spi_gpio_platform_data *pdata;
@@ -408,21 +408,10 @@
static struct platform_driver spi_gpio_driver = {
.driver.name = DRIVER_NAME,
.driver.owner = THIS_MODULE,
- .remove = __exit_p(spi_gpio_remove),
+ .probe = spi_gpio_probe,
+ .remove = __devexit_p(spi_gpio_remove),
};
-
-static int __init spi_gpio_init(void)
-{
- return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
-}
-module_init(spi_gpio_init);
-
-static void __exit spi_gpio_exit(void)
-{
- platform_driver_unregister(&spi_gpio_driver);
-}
-module_exit(spi_gpio_exit);
-
+module_platform_driver(spi_gpio_driver);
MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO ");
MODULE_AUTHOR("David Brownell");
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index fa594d6..c6e697f 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -929,19 +929,7 @@
.probe = spi_imx_probe,
.remove = __devexit_p(spi_imx_remove),
};
-
-static int __init spi_imx_init(void)
-{
- return platform_driver_register(&spi_imx_driver);
-}
-
-static void __exit spi_imx_exit(void)
-{
- platform_driver_unregister(&spi_imx_driver);
-}
-
-module_init(spi_imx_init);
-module_exit(spi_imx_exit);
+module_platform_driver(spi_imx_driver);
MODULE_DESCRIPTION("SPI Master Controller driver");
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index 6a5b423..4c63f77 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -559,18 +559,7 @@
.of_match_table = mpc512x_psc_spi_of_match,
},
};
-
-static int __init mpc512x_psc_spi_init(void)
-{
- return platform_driver_register(&mpc512x_psc_spi_of_driver);
-}
-module_init(mpc512x_psc_spi_init);
-
-static void __exit mpc512x_psc_spi_exit(void)
-{
- platform_driver_unregister(&mpc512x_psc_spi_of_driver);
-}
-module_exit(mpc512x_psc_spi_exit);
+module_platform_driver(mpc512x_psc_spi_of_driver);
MODULE_AUTHOR("John Rigby");
MODULE_DESCRIPTION("MPC512x PSC SPI Driver");
diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c
index e30baf0..6604715 100644
--- a/drivers/spi/spi-mpc52xx-psc.c
+++ b/drivers/spi/spi-mpc52xx-psc.c
@@ -511,18 +511,7 @@
.of_match_table = mpc52xx_psc_spi_of_match,
},
};
-
-static int __init mpc52xx_psc_spi_init(void)
-{
- return platform_driver_register(&mpc52xx_psc_spi_of_driver);
-}
-module_init(mpc52xx_psc_spi_init);
-
-static void __exit mpc52xx_psc_spi_exit(void)
-{
- platform_driver_unregister(&mpc52xx_psc_spi_of_driver);
-}
-module_exit(mpc52xx_psc_spi_exit);
+module_platform_driver(mpc52xx_psc_spi_of_driver);
MODULE_AUTHOR("Dragos Carp");
MODULE_DESCRIPTION("MPC52xx PSC SPI Driver");
diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c
index 015a974..57633d9 100644
--- a/drivers/spi/spi-mpc52xx.c
+++ b/drivers/spi/spi-mpc52xx.c
@@ -564,16 +564,4 @@
.probe = mpc52xx_spi_probe,
.remove = __devexit_p(mpc52xx_spi_remove),
};
-
-static int __init mpc52xx_spi_init(void)
-{
- return platform_driver_register(&mpc52xx_spi_of_driver);
-}
-module_init(mpc52xx_spi_init);
-
-static void __exit mpc52xx_spi_exit(void)
-{
- platform_driver_unregister(&mpc52xx_spi_of_driver);
-}
-module_exit(mpc52xx_spi_exit);
-
+module_platform_driver(mpc52xx_spi_of_driver);
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index c0a6ce8..e763254 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -484,19 +484,7 @@
.owner = THIS_MODULE,
},
};
-
-static int __init nuc900_spi_init(void)
-{
- return platform_driver_register(&nuc900_spi_driver);
-}
-
-static void __exit nuc900_spi_exit(void)
-{
- platform_driver_unregister(&nuc900_spi_driver);
-}
-
-module_init(nuc900_spi_init);
-module_exit(nuc900_spi_exit);
+module_platform_driver(nuc900_spi_driver);
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("nuc900 spi driver!");
diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c
index f1bde66..897274e 100644
--- a/drivers/spi/spi-oc-tiny.c
+++ b/drivers/spi/spi-oc-tiny.c
@@ -406,18 +406,7 @@
.of_match_table = tiny_spi_match,
},
};
-
-static int __init tiny_spi_init(void)
-{
- return platform_driver_register(&tiny_spi_driver);
-}
-module_init(tiny_spi_init);
-
-static void __exit tiny_spi_exit(void)
-{
- platform_driver_unregister(&tiny_spi_driver);
-}
-module_exit(tiny_spi_exit);
+module_platform_driver(tiny_spi_driver);
MODULE_DESCRIPTION("OpenCores tiny SPI driver");
MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index fde3a2d..322be7a 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1116,15 +1116,16 @@
status = -ENODEV;
goto err1;
}
+
+ r->start += pdata->regs_offset;
+ r->end += pdata->regs_offset;
+ mcspi->phys = r->start;
if (!request_mem_region(r->start, resource_size(r),
dev_name(&pdev->dev))) {
status = -EBUSY;
goto err1;
}
- r->start += pdata->regs_offset;
- r->end += pdata->regs_offset;
- mcspi->phys = r->start;
mcspi->base = ioremap(r->start, resource_size(r));
if (!mcspi->base) {
dev_dbg(&pdev->dev, "can't ioremap MCSPI\n");
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 730b4a3..f103e47 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -113,7 +113,6 @@
#define SSP_CR0_MASK_CSS_ST (0x1FUL << 16)
#define SSP_CR0_MASK_FRF_ST (0x3UL << 21)
-
/*
* SSP Control Register 0 - SSP_CR1
*/
@@ -283,7 +282,6 @@
#define SPI_POLLING_TIMEOUT 1000
-
/*
* The type of reading going on on this chip
*/
@@ -515,9 +513,6 @@
if (msg->complete)
msg->complete(msg->context);
/* This message is completed, so let's turn off the clocks & power */
- clk_disable(pl022->clk);
- amba_pclk_disable(pl022->adev);
- amba_vcore_disable(pl022->adev);
pm_runtime_put(&pl022->adev->dev);
}
@@ -752,7 +747,6 @@
*/
}
-
/**
* next_transfer - Move to the Next transfer in the current spi message
* @pl022: SSP driver private data structure
@@ -1019,14 +1013,14 @@
dmaengine_slave_config(txchan, &tx_conf);
/* Create sglists for the transfers */
- pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1;
+ pages = DIV_ROUND_UP(pl022->cur_transfer->len, PAGE_SIZE);
dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages);
- ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_KERNEL);
+ ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_ATOMIC);
if (ret)
goto err_alloc_rx_sg;
- ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_KERNEL);
+ ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_ATOMIC);
if (ret)
goto err_alloc_tx_sg;
@@ -1534,8 +1528,7 @@
/* Initial message state */
pl022->cur_msg->state = STATE_START;
pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
- struct spi_transfer,
- transfer_list);
+ struct spi_transfer, transfer_list);
/* Setup the SPI using the per chip configuration */
pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
@@ -1545,9 +1538,6 @@
* (poll/interrupt/DMA)
*/
pm_runtime_get_sync(&pl022->adev->dev);
- amba_vcore_enable(pl022->adev);
- amba_pclk_enable(pl022->adev);
- clk_enable(pl022->clk);
restore_state(pl022);
flush(pl022);
@@ -1557,7 +1547,6 @@
do_interrupt_dma_transfer(pl022);
}
-
static int __init init_queue(struct pl022 *pl022)
{
INIT_LIST_HEAD(&pl022->queue);
@@ -1566,8 +1555,8 @@
pl022->running = false;
pl022->busy = false;
- tasklet_init(&pl022->pump_transfers,
- pump_transfers, (unsigned long)pl022);
+ tasklet_init(&pl022->pump_transfers, pump_transfers,
+ (unsigned long)pl022);
INIT_WORK(&pl022->pump_messages, pump_messages);
pl022->workqueue = create_singlethread_workqueue(
@@ -1578,7 +1567,6 @@
return 0;
}
-
static int start_queue(struct pl022 *pl022)
{
unsigned long flags;
@@ -1601,7 +1589,6 @@
return 0;
}
-
static int stop_queue(struct pl022 *pl022)
{
unsigned long flags;
@@ -1797,71 +1784,70 @@
return 0;
}
-static int calculate_effective_freq(struct pl022 *pl022,
- int freq,
- struct ssp_clock_params *clk_freq)
+static inline u32 spi_rate(u32 rate, u16 cpsdvsr, u16 scr)
+{
+ return rate / (cpsdvsr * (1 + scr));
+}
+
+static int calculate_effective_freq(struct pl022 *pl022, int freq, struct
+ ssp_clock_params * clk_freq)
{
/* Lets calculate the frequency parameters */
- u16 cpsdvsr = 2;
- u16 scr = 0;
- bool freq_found = false;
- u32 rate;
- u32 max_tclk;
- u32 min_tclk;
+ u16 cpsdvsr = CPSDVR_MIN, scr = SCR_MIN;
+ u32 rate, max_tclk, min_tclk, best_freq = 0, best_cpsdvsr = 0,
+ best_scr = 0, tmp, found = 0;
rate = clk_get_rate(pl022->clk);
/* cpsdvscr = 2 & scr 0 */
- max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
+ max_tclk = spi_rate(rate, CPSDVR_MIN, SCR_MIN);
/* cpsdvsr = 254 & scr = 255 */
- min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
+ min_tclk = spi_rate(rate, CPSDVR_MAX, SCR_MAX);
- if ((freq <= max_tclk) && (freq >= min_tclk)) {
- while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
- while (scr <= SCR_MAX && !freq_found) {
- if ((rate /
- (cpsdvsr * (1 + scr))) > freq)
- scr += 1;
- else {
- /*
- * This bool is made true when
- * effective frequency >=
- * target frequency is found
- */
- freq_found = true;
- if ((rate /
- (cpsdvsr * (1 + scr))) != freq) {
- if (scr == SCR_MIN) {
- cpsdvsr -= 2;
- scr = SCR_MAX;
- } else
- scr -= 1;
- }
- }
- }
- if (!freq_found) {
- cpsdvsr += 2;
- scr = SCR_MIN;
- }
- }
- if (cpsdvsr != 0) {
- dev_dbg(&pl022->adev->dev,
- "SSP Effective Frequency is %u\n",
- (rate / (cpsdvsr * (1 + scr))));
- clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
- clk_freq->scr = (u8) (scr & 0xFF);
- dev_dbg(&pl022->adev->dev,
- "SSP cpsdvsr = %d, scr = %d\n",
- clk_freq->cpsdvsr, clk_freq->scr);
- }
- } else {
+ if (!((freq <= max_tclk) && (freq >= min_tclk))) {
dev_err(&pl022->adev->dev,
"controller data is incorrect: out of range frequency");
return -EINVAL;
}
+
+ /*
+ * best_freq will give closest possible available rate (<= requested
+ * freq) for all values of scr & cpsdvsr.
+ */
+ while ((cpsdvsr <= CPSDVR_MAX) && !found) {
+ while (scr <= SCR_MAX) {
+ tmp = spi_rate(rate, cpsdvsr, scr);
+
+ if (tmp > freq)
+ scr++;
+ /*
+ * If found exact value, update and break.
+ * If found more closer value, update and continue.
+ */
+ else if ((tmp == freq) || (tmp > best_freq)) {
+ best_freq = tmp;
+ best_cpsdvsr = cpsdvsr;
+ best_scr = scr;
+
+ if (tmp == freq)
+ break;
+ }
+ scr++;
+ }
+ cpsdvsr += 2;
+ scr = SCR_MIN;
+ }
+
+ clk_freq->cpsdvsr = (u8) (best_cpsdvsr & 0xFF);
+ clk_freq->scr = (u8) (best_scr & 0xFF);
+ dev_dbg(&pl022->adev->dev,
+ "SSP Target Frequency is: %u, Effective Frequency is %u\n",
+ freq, best_freq);
+ dev_dbg(&pl022->adev->dev, "SSP cpsdvsr = %d, scr = %d\n",
+ clk_freq->cpsdvsr, clk_freq->scr);
+
return 0;
}
-
/*
* A piece of default chip info unless the platform
* supplies it.
@@ -1879,7 +1865,6 @@
.cs_control = null_cs_control,
};
-
/**
* pl022_setup - setup function registered to SPI master framework
* @spi: spi device which is requesting setup
@@ -1956,7 +1941,6 @@
goto err_config_params;
}
-
status = verify_controller_parameters(pl022, chip_info);
if (status) {
dev_err(&spi->dev, "controller data is incorrect");
@@ -2096,7 +2080,8 @@
}
SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
- SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
+ SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD,
+ 3);
/* Save controller_state */
spi_set_ctldata(spi, chip);
@@ -2122,7 +2107,6 @@
kfree(chip);
}
-
static int __devinit
pl022_probe(struct amba_device *adev, const struct amba_id *id)
{
@@ -2186,8 +2170,6 @@
}
printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
adev->res.start, pl022->virtbase);
- pm_runtime_enable(dev);
- pm_runtime_resume(dev);
pl022->clk = clk_get(&adev->dev, NULL);
if (IS_ERR(pl022->clk)) {
@@ -2196,6 +2178,12 @@
goto err_no_clk;
}
+ status = clk_prepare(pl022->clk);
+ if (status) {
+ dev_err(&adev->dev, "could not prepare SSP/SPI bus clock\n");
+ goto err_clk_prep;
+ }
+
/* Disable SSP */
writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
SSP_CR1(pl022->virtbase));
@@ -2235,22 +2223,22 @@
goto err_spi_register;
}
dev_dbg(dev, "probe succeeded\n");
- /*
- * Disable the silicon block pclk and any voltage domain and just
- * power it up and clock it when it's needed
- */
- amba_pclk_disable(adev);
- amba_vcore_disable(adev);
+
+ /* let runtime pm put suspend */
+ pm_runtime_put(dev);
return 0;
err_spi_register:
err_start_queue:
err_init_queue:
destroy_queue(pl022);
- pl022_dma_remove(pl022);
+ if (platform_info->enable_dma)
+ pl022_dma_remove(pl022);
+
free_irq(adev->irq[0], pl022);
- pm_runtime_disable(&adev->dev);
err_no_irq:
+ clk_unprepare(pl022->clk);
+ err_clk_prep:
clk_put(pl022->clk);
err_no_clk:
iounmap(pl022->virtbase);
@@ -2271,13 +2259,22 @@
if (!pl022)
return 0;
+ /*
+ * undo pm_runtime_put() in probe. I assume that we're not
+ * accessing the primecell here.
+ */
+ pm_runtime_get_noresume(&adev->dev);
+
/* Remove the queue */
if (destroy_queue(pl022) != 0)
dev_err(&adev->dev, "queue remove failed\n");
load_ssp_default_config(pl022);
- pl022_dma_remove(pl022);
+ if (pl022->master_info->enable_dma)
+ pl022_dma_remove(pl022);
+
free_irq(adev->irq[0], pl022);
clk_disable(pl022->clk);
+ clk_unprepare(pl022->clk);
clk_put(pl022->clk);
iounmap(pl022->virtbase);
amba_release_regions(adev);
@@ -2288,46 +2285,70 @@
return 0;
}
-#ifdef CONFIG_PM
-static int pl022_suspend(struct amba_device *adev, pm_message_t state)
+#ifdef CONFIG_SUSPEND
+static int pl022_suspend(struct device *dev)
{
- struct pl022 *pl022 = amba_get_drvdata(adev);
+ struct pl022 *pl022 = dev_get_drvdata(dev);
int status = 0;
status = stop_queue(pl022);
if (status) {
- dev_warn(&adev->dev, "suspend cannot stop queue\n");
+ dev_warn(dev, "suspend cannot stop queue\n");
return status;
}
- amba_vcore_enable(adev);
- amba_pclk_enable(adev);
+ amba_vcore_enable(pl022->adev);
+ amba_pclk_enable(pl022->adev);
load_ssp_default_config(pl022);
- amba_pclk_disable(adev);
- amba_vcore_disable(adev);
- dev_dbg(&adev->dev, "suspended\n");
+ amba_pclk_disable(pl022->adev);
+ amba_vcore_disable(pl022->adev);
+ dev_dbg(dev, "suspended\n");
return 0;
}
-static int pl022_resume(struct amba_device *adev)
+static int pl022_resume(struct device *dev)
{
- struct pl022 *pl022 = amba_get_drvdata(adev);
+ struct pl022 *pl022 = dev_get_drvdata(dev);
int status = 0;
/* Start the queue running */
status = start_queue(pl022);
if (status)
- dev_err(&adev->dev, "problem starting queue (%d)\n", status);
+ dev_err(dev, "problem starting queue (%d)\n", status);
else
- dev_dbg(&adev->dev, "resumed\n");
+ dev_dbg(dev, "resumed\n");
return status;
}
-#else
-#define pl022_suspend NULL
-#define pl022_resume NULL
#endif /* CONFIG_PM */
+#ifdef CONFIG_PM_RUNTIME
+static int pl022_runtime_suspend(struct device *dev)
+{
+ struct pl022 *pl022 = dev_get_drvdata(dev);
+
+ clk_disable(pl022->clk);
+ amba_vcore_disable(pl022->adev);
+
+ return 0;
+}
+
+static int pl022_runtime_resume(struct device *dev)
+{
+ struct pl022 *pl022 = dev_get_drvdata(dev);
+
+ amba_vcore_enable(pl022->adev);
+ clk_enable(pl022->clk);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops pl022_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pl022_suspend, pl022_resume)
+ SET_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL)
+};
+
static struct vendor_data vendor_arm = {
.fifodepth = 8,
.max_bpw = 16,
@@ -2337,7 +2358,6 @@
.loopback = true,
};
-
static struct vendor_data vendor_st = {
.fifodepth = 32,
.max_bpw = 32,
@@ -2392,9 +2412,9 @@
* and 32 locations deep TX/RX FIFO but no extended
* CR0/CR1 register
*/
- .id = 0x00080023,
- .mask = 0xffffffff,
- .data = &vendor_st_pl023,
+ .id = 0x00080023,
+ .mask = 0xffffffff,
+ .data = &vendor_st_pl023,
},
{
.id = 0x10080023,
@@ -2407,27 +2427,23 @@
static struct amba_driver pl022_driver = {
.drv = {
.name = "ssp-pl022",
+ .pm = &pl022_dev_pm_ops,
},
.id_table = pl022_ids,
.probe = pl022_probe,
.remove = __devexit_p(pl022_remove),
- .suspend = pl022_suspend,
- .resume = pl022_resume,
};
-
static int __init pl022_init(void)
{
return amba_driver_register(&pl022_driver);
}
-
subsys_initcall(pl022_init);
static void __exit pl022_exit(void)
{
amba_driver_unregister(&pl022_driver);
}
-
module_exit(pl022_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index b267fd9..98ec532 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -514,7 +514,7 @@
/* Request IRQ */
hw->irqnum = irq_of_parse_and_map(np, 0);
ret = request_irq(hw->irqnum, spi_ppc4xx_int,
- IRQF_DISABLED, "spi_ppc4xx_of", (void *)hw);
+ 0, "spi_ppc4xx_of", (void *)hw);
if (ret) {
dev_err(dev, "unable to allocate interrupt\n");
goto free_gpios;
@@ -594,18 +594,7 @@
.of_match_table = spi_ppc4xx_of_match,
},
};
-
-static int __init spi_ppc4xx_init(void)
-{
- return platform_driver_register(&spi_ppc4xx_of_driver);
-}
-module_init(spi_ppc4xx_init);
-
-static void __exit spi_ppc4xx_exit(void)
-{
- platform_driver_unregister(&spi_ppc4xx_of_driver);
-}
-module_exit(spi_ppc4xx_exit);
+module_platform_driver(spi_ppc4xx_of_driver);
MODULE_AUTHOR("Gary Jennejohn & Stefan Roese");
MODULE_DESCRIPTION("Simple PPC4xx SPI Driver");
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index 1996ac5..b857a3e 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -505,7 +505,7 @@
}
}
-static int __init s3c24xx_spi_probe(struct platform_device *pdev)
+static int __devinit s3c24xx_spi_probe(struct platform_device *pdev)
{
struct s3c2410_spi_info *pdata;
struct s3c24xx_spi *hw;
@@ -661,7 +661,7 @@
return err;
}
-static int __exit s3c24xx_spi_remove(struct platform_device *dev)
+static int __devexit s3c24xx_spi_remove(struct platform_device *dev)
{
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
@@ -719,26 +719,15 @@
MODULE_ALIAS("platform:s3c2410-spi");
static struct platform_driver s3c24xx_spi_driver = {
- .remove = __exit_p(s3c24xx_spi_remove),
+ .probe = s3c24xx_spi_probe,
+ .remove = __devexit_p(s3c24xx_spi_remove),
.driver = {
.name = "s3c2410-spi",
.owner = THIS_MODULE,
.pm = S3C24XX_SPI_PMOPS,
},
};
-
-static int __init s3c24xx_spi_init(void)
-{
- return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
-}
-
-static void __exit s3c24xx_spi_exit(void)
-{
- platform_driver_unregister(&s3c24xx_spi_driver);
-}
-
-module_init(s3c24xx_spi_init);
-module_exit(s3c24xx_spi_exit);
+module_platform_driver(s3c24xx_spi_driver);
MODULE_DESCRIPTION("S3C24XX SPI Driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index e00d94b2..0f4834ae 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -635,7 +635,7 @@
goto err2;
}
- ret = request_irq(i, sh_msiof_spi_irq, IRQF_DISABLED,
+ ret = request_irq(i, sh_msiof_spi_irq, 0,
dev_name(&pdev->dev), p);
if (ret) {
dev_err(&pdev->dev, "unable to request irq\n");
@@ -730,18 +730,7 @@
.pm = &sh_msiof_spi_dev_pm_ops,
},
};
-
-static int __init sh_msiof_spi_init(void)
-{
- return platform_driver_register(&sh_msiof_spi_drv);
-}
-module_init(sh_msiof_spi_init);
-
-static void __exit sh_msiof_spi_exit(void)
-{
- platform_driver_unregister(&sh_msiof_spi_drv);
-}
-module_exit(sh_msiof_spi_exit);
+module_platform_driver(sh_msiof_spi_drv);
MODULE_DESCRIPTION("SuperH MSIOF SPI Master Interface Driver");
MODULE_AUTHOR("Magnus Damm");
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
index e7779c0..8844bc34 100644
--- a/drivers/spi/spi-sh-sci.c
+++ b/drivers/spi/spi-sh-sci.c
@@ -186,18 +186,7 @@
.owner = THIS_MODULE,
},
};
-
-static int __init sh_sci_spi_init(void)
-{
- return platform_driver_register(&sh_sci_spi_drv);
-}
-module_init(sh_sci_spi_init);
-
-static void __exit sh_sci_spi_exit(void)
-{
- platform_driver_unregister(&sh_sci_spi_drv);
-}
-module_exit(sh_sci_spi_exit);
+module_platform_driver(sh_sci_spi_drv);
MODULE_DESCRIPTION("SH SCI SPI Driver");
MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c
index 9eedd71..70c8af9 100644
--- a/drivers/spi/spi-sh.c
+++ b/drivers/spi/spi-sh.c
@@ -484,7 +484,7 @@
goto error2;
}
- ret = request_irq(irq, spi_sh_irq, IRQF_DISABLED, "spi_sh", ss);
+ ret = request_irq(irq, spi_sh_irq, 0, "spi_sh", ss);
if (ret < 0) {
dev_err(&pdev->dev, "request_irq error\n");
goto error3;
@@ -524,18 +524,7 @@
.owner = THIS_MODULE,
},
};
-
-static int __init spi_sh_init(void)
-{
- return platform_driver_register(&spi_sh_driver);
-}
-module_init(spi_sh_init);
-
-static void __exit spi_sh_exit(void)
-{
- platform_driver_unregister(&spi_sh_driver);
-}
-module_exit(spi_sh_exit);
+module_platform_driver(spi_sh_driver);
MODULE_DESCRIPTION("SH SPI bus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-stmp.c b/drivers/spi/spi-stmp.c
index fadff76..58e3852 100644
--- a/drivers/spi/spi-stmp.c
+++ b/drivers/spi/spi-stmp.c
@@ -659,19 +659,8 @@
.suspend = stmp_spi_suspend,
.resume = stmp_spi_resume,
};
+module_platform_driver(stmp_spi_driver);
-static int __init stmp_spi_init(void)
-{
- return platform_driver_register(&stmp_spi_driver);
-}
-
-static void __exit stmp_spi_exit(void)
-{
- platform_driver_unregister(&stmp_spi_driver);
-}
-
-module_init(stmp_spi_init);
-module_exit(stmp_spi_exit);
module_param(pio, int, S_IRUGO);
module_param(clock, int, S_IRUGO);
MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com>");
diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c
index a5a6302..ae6d78a 100644
--- a/drivers/spi/spi-tegra.c
+++ b/drivers/spi/spi-tegra.c
@@ -18,6 +18,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -464,7 +465,7 @@
return 0;
}
-static int __init spi_tegra_probe(struct platform_device *pdev)
+static int __devinit spi_tegra_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct spi_tegra_data *tspi;
@@ -612,19 +613,9 @@
.owner = THIS_MODULE,
.of_match_table = spi_tegra_of_match_table,
},
+ .probe = spi_tegra_probe,
.remove = __devexit_p(spi_tegra_remove),
};
-
-static int __init spi_tegra_init(void)
-{
- return platform_driver_probe(&spi_tegra_driver, spi_tegra_probe);
-}
-module_init(spi_tegra_init);
-
-static void __exit spi_tegra_exit(void)
-{
- platform_driver_unregister(&spi_tegra_driver);
-}
-module_exit(spi_tegra_exit);
+module_platform_driver(spi_tegra_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-ti-ssp.c b/drivers/spi/spi-ti-ssp.c
index ee22795..7963c60 100644
--- a/drivers/spi/spi-ti-ssp.c
+++ b/drivers/spi/spi-ti-ssp.c
@@ -383,18 +383,7 @@
.owner = THIS_MODULE,
},
};
-
-static int __init ti_ssp_spi_init(void)
-{
- return platform_driver_register(&ti_ssp_spi_driver);
-}
-module_init(ti_ssp_spi_init);
-
-static void __exit ti_ssp_spi_exit(void)
-{
- platform_driver_unregister(&ti_ssp_spi_driver);
-}
-module_exit(ti_ssp_spi_exit);
+module_platform_driver(ti_ssp_spi_driver);
MODULE_DESCRIPTION("SSP SPI Master");
MODULE_AUTHOR("Cyril Chemparathy");
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 4d2c75d..4c5a663 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -538,18 +538,7 @@
.of_match_table = xilinx_spi_of_match,
},
};
-
-static int __init xilinx_spi_pltfm_init(void)
-{
- return platform_driver_register(&xilinx_spi_driver);
-}
-module_init(xilinx_spi_pltfm_init);
-
-static void __exit xilinx_spi_pltfm_exit(void)
-{
- platform_driver_unregister(&xilinx_spi_driver);
-}
-module_exit(xilinx_spi_pltfm_exit);
+module_platform_driver(xilinx_spi_driver);
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("Xilinx SPI driver");
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 89e5039..d132c27 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -34,8 +34,6 @@
source "drivers/staging/cx25821/Kconfig"
-source "drivers/staging/tm6000/Kconfig"
-
source "drivers/staging/cxd2099/Kconfig"
source "drivers/staging/usbip/Kconfig"
@@ -74,8 +72,6 @@
source "drivers/staging/line6/Kconfig"
-source "drivers/gpu/drm/vmwgfx/Kconfig"
-
source "drivers/gpu/drm/nouveau/Kconfig"
source "drivers/staging/octeon/Kconfig"
@@ -144,8 +140,6 @@
source "drivers/staging/gma500/Kconfig"
-source "drivers/staging/altera-stapl/Kconfig"
-
source "drivers/staging/mei/Kconfig"
source "drivers/staging/nvec/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index d7a5a04..936b7c2 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -8,7 +8,6 @@
obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_VIDEO_GO7007) += go7007/
obj-$(CONFIG_VIDEO_CX25821) += cx25821/
-obj-$(CONFIG_VIDEO_TM6000) += tm6000/
obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_USBIP_CORE) += usbip/
@@ -59,7 +58,6 @@
obj-$(CONFIG_FT1000) += ft1000/
obj-$(CONFIG_SND_INTEL_SST) += intel_sst/
obj-$(CONFIG_SPEAKUP) += speakup/
-obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/
obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217) += cptm1217/
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/
obj-$(CONFIG_DRM_PSB) += gma500/
diff --git a/drivers/staging/altera-stapl/Kconfig b/drivers/staging/altera-stapl/Kconfig
deleted file mode 100644
index b653732..0000000
--- a/drivers/staging/altera-stapl/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config ALTERA_STAPL
- tristate "Altera FPGA firmware download module"
- depends on I2C
- default n
- help
- An Altera FPGA module. Say Y when you want to support this tool.
diff --git a/drivers/staging/altera-stapl/Makefile b/drivers/staging/altera-stapl/Makefile
deleted file mode 100644
index ddeede3c..0000000
--- a/drivers/staging/altera-stapl/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-altera-stapl-y := altera-lpt.o altera-jtag.o altera-comp.o altera.o
-
-obj-$(CONFIG_ALTERA_STAPL) += altera-stapl.o
diff --git a/drivers/staging/altera-stapl/altera-jtag.c b/drivers/staging/altera-stapl/altera-jtag.c
deleted file mode 100644
index 8b1620b..0000000
--- a/drivers/staging/altera-stapl/altera-jtag.c
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- * altera-jtag.c
- *
- * altera FPGA driver
- *
- * Copyright (C) Altera Corporation 1998-2001
- * Copyright (C) 2010 NetUP Inc.
- * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-#include "altera.h"
-#include "altera-exprt.h"
-#include "altera-jtag.h"
-
-#define alt_jtag_io(a, b, c)\
- astate->config->jtag_io(astate->config->dev, a, b, c);
-
-#define alt_malloc(a) kzalloc(a, GFP_KERNEL);
-
-/*
- * This structure shows, for each JTAG state, which state is reached after
- * a single TCK clock cycle with TMS high or TMS low, respectively. This
- * describes all possible state transitions in the JTAG state machine.
- */
-struct altera_jtag_machine {
- enum altera_jtag_state tms_high;
- enum altera_jtag_state tms_low;
-};
-
-static const struct altera_jtag_machine altera_transitions[] = {
- /* RESET */ { RESET, IDLE },
- /* IDLE */ { DRSELECT, IDLE },
- /* DRSELECT */ { IRSELECT, DRCAPTURE },
- /* DRCAPTURE */ { DREXIT1, DRSHIFT },
- /* DRSHIFT */ { DREXIT1, DRSHIFT },
- /* DREXIT1 */ { DRUPDATE, DRPAUSE },
- /* DRPAUSE */ { DREXIT2, DRPAUSE },
- /* DREXIT2 */ { DRUPDATE, DRSHIFT },
- /* DRUPDATE */ { DRSELECT, IDLE },
- /* IRSELECT */ { RESET, IRCAPTURE },
- /* IRCAPTURE */ { IREXIT1, IRSHIFT },
- /* IRSHIFT */ { IREXIT1, IRSHIFT },
- /* IREXIT1 */ { IRUPDATE, IRPAUSE },
- /* IRPAUSE */ { IREXIT2, IRPAUSE },
- /* IREXIT2 */ { IRUPDATE, IRSHIFT },
- /* IRUPDATE */ { DRSELECT, IDLE }
-};
-
-/*
- * This table contains the TMS value to be used to take the NEXT STEP on
- * the path to the desired state. The array index is the current state,
- * and the bit position is the desired endstate. To find out which state
- * is used as the intermediate state, look up the TMS value in the
- * altera_transitions[] table.
- */
-static const u16 altera_jtag_path_map[16] = {
- /* RST RTI SDRS CDR SDR E1DR PDR E2DR */
- 0x0001, 0xFFFD, 0xFE01, 0xFFE7, 0xFFEF, 0xFF0F, 0xFFBF, 0xFFFF,
- /* UDR SIRS CIR SIR E1IR PIR E2IR UIR */
- 0xFEFD, 0x0001, 0xF3FF, 0xF7FF, 0x87FF, 0xDFFF, 0xFFFF, 0x7FFD
-};
-
-/* Flag bits for alt_jtag_io() function */
-#define TMS_HIGH 1
-#define TMS_LOW 0
-#define TDI_HIGH 1
-#define TDI_LOW 0
-#define READ_TDO 1
-#define IGNORE_TDO 0
-
-int altera_jinit(struct altera_state *astate)
-{
- struct altera_jtag *js = &astate->js;
-
- /* initial JTAG state is unknown */
- js->jtag_state = ILLEGAL_JTAG_STATE;
-
- /* initialize to default state */
- js->drstop_state = IDLE;
- js->irstop_state = IDLE;
- js->dr_pre = 0;
- js->dr_post = 0;
- js->ir_pre = 0;
- js->ir_post = 0;
- js->dr_length = 0;
- js->ir_length = 0;
-
- js->dr_pre_data = NULL;
- js->dr_post_data = NULL;
- js->ir_pre_data = NULL;
- js->ir_post_data = NULL;
- js->dr_buffer = NULL;
- js->ir_buffer = NULL;
-
- return 0;
-}
-
-int altera_set_drstop(struct altera_jtag *js, enum altera_jtag_state state)
-{
- js->drstop_state = state;
-
- return 0;
-}
-
-int altera_set_irstop(struct altera_jtag *js, enum altera_jtag_state state)
-{
- js->irstop_state = state;
-
- return 0;
-}
-
-int altera_set_dr_pre(struct altera_jtag *js,
- u32 count, u32 start_index,
- u8 *preamble_data)
-{
- int status = 0;
- u32 i;
- u32 j;
-
- if (count > js->dr_pre) {
- kfree(js->dr_pre_data);
- js->dr_pre_data = (u8 *)alt_malloc((count + 7) >> 3);
- if (js->dr_pre_data == NULL)
- status = -ENOMEM;
- else
- js->dr_pre = count;
- } else
- js->dr_pre = count;
-
- if (status == 0) {
- for (i = 0; i < count; ++i) {
- j = i + start_index;
-
- if (preamble_data == NULL)
- js->dr_pre_data[i >> 3] |= (1 << (i & 7));
- else {
- if (preamble_data[j >> 3] & (1 << (j & 7)))
- js->dr_pre_data[i >> 3] |=
- (1 << (i & 7));
- else
- js->dr_pre_data[i >> 3] &=
- ~(u32)(1 << (i & 7));
-
- }
- }
- }
-
- return status;
-}
-
-int altera_set_ir_pre(struct altera_jtag *js, u32 count, u32 start_index,
- u8 *preamble_data)
-{
- int status = 0;
- u32 i;
- u32 j;
-
- if (count > js->ir_pre) {
- kfree(js->ir_pre_data);
- js->ir_pre_data = (u8 *)alt_malloc((count + 7) >> 3);
- if (js->ir_pre_data == NULL)
- status = -ENOMEM;
- else
- js->ir_pre = count;
-
- } else
- js->ir_pre = count;
-
- if (status == 0) {
- for (i = 0; i < count; ++i) {
- j = i + start_index;
- if (preamble_data == NULL)
- js->ir_pre_data[i >> 3] |= (1 << (i & 7));
- else {
- if (preamble_data[j >> 3] & (1 << (j & 7)))
- js->ir_pre_data[i >> 3] |=
- (1 << (i & 7));
- else
- js->ir_pre_data[i >> 3] &=
- ~(u32)(1 << (i & 7));
-
- }
- }
- }
-
- return status;
-}
-
-int altera_set_dr_post(struct altera_jtag *js, u32 count, u32 start_index,
- u8 *postamble_data)
-{
- int status = 0;
- u32 i;
- u32 j;
-
- if (count > js->dr_post) {
- kfree(js->dr_post_data);
- js->dr_post_data = (u8 *)alt_malloc((count + 7) >> 3);
-
- if (js->dr_post_data == NULL)
- status = -ENOMEM;
- else
- js->dr_post = count;
-
- } else
- js->dr_post = count;
-
- if (status == 0) {
- for (i = 0; i < count; ++i) {
- j = i + start_index;
-
- if (postamble_data == NULL)
- js->dr_post_data[i >> 3] |= (1 << (i & 7));
- else {
- if (postamble_data[j >> 3] & (1 << (j & 7)))
- js->dr_post_data[i >> 3] |=
- (1 << (i & 7));
- else
- js->dr_post_data[i >> 3] &=
- ~(u32)(1 << (i & 7));
-
- }
- }
- }
-
- return status;
-}
-
-int altera_set_ir_post(struct altera_jtag *js, u32 count, u32 start_index,
- u8 *postamble_data)
-{
- int status = 0;
- u32 i;
- u32 j;
-
- if (count > js->ir_post) {
- kfree(js->ir_post_data);
- js->ir_post_data = (u8 *)alt_malloc((count + 7) >> 3);
- if (js->ir_post_data == NULL)
- status = -ENOMEM;
- else
- js->ir_post = count;
-
- } else
- js->ir_post = count;
-
- if (status != 0)
- return status;
-
- for (i = 0; i < count; ++i) {
- j = i + start_index;
-
- if (postamble_data == NULL)
- js->ir_post_data[i >> 3] |= (1 << (i & 7));
- else {
- if (postamble_data[j >> 3] & (1 << (j & 7)))
- js->ir_post_data[i >> 3] |= (1 << (i & 7));
- else
- js->ir_post_data[i >> 3] &=
- ~(u32)(1 << (i & 7));
-
- }
- }
-
- return status;
-}
-
-static void altera_jreset_idle(struct altera_state *astate)
-{
- struct altera_jtag *js = &astate->js;
- int i;
- /* Go to Test Logic Reset (no matter what the starting state may be) */
- for (i = 0; i < 5; ++i)
- alt_jtag_io(TMS_HIGH, TDI_LOW, IGNORE_TDO);
-
- /* Now step to Run Test / Idle */
- alt_jtag_io(TMS_LOW, TDI_LOW, IGNORE_TDO);
- js->jtag_state = IDLE;
-}
-
-int altera_goto_jstate(struct altera_state *astate,
- enum altera_jtag_state state)
-{
- struct altera_jtag *js = &astate->js;
- int tms;
- int count = 0;
- int status = 0;
-
- if (js->jtag_state == ILLEGAL_JTAG_STATE)
- /* initialize JTAG chain to known state */
- altera_jreset_idle(astate);
-
- if (js->jtag_state == state) {
- /*
- * We are already in the desired state.
- * If it is a stable state, loop here.
- * Otherwise do nothing (no clock cycles).
- */
- if ((state == IDLE) || (state == DRSHIFT) ||
- (state == DRPAUSE) || (state == IRSHIFT) ||
- (state == IRPAUSE)) {
- alt_jtag_io(TMS_LOW, TDI_LOW, IGNORE_TDO);
- } else if (state == RESET)
- alt_jtag_io(TMS_HIGH, TDI_LOW, IGNORE_TDO);
-
- } else {
- while ((js->jtag_state != state) && (count < 9)) {
- /* Get TMS value to take a step toward desired state */
- tms = (altera_jtag_path_map[js->jtag_state] &
- (1 << state))
- ? TMS_HIGH : TMS_LOW;
-
- /* Take a step */
- alt_jtag_io(tms, TDI_LOW, IGNORE_TDO);
-
- if (tms)
- js->jtag_state =
- altera_transitions[js->jtag_state].tms_high;
- else
- js->jtag_state =
- altera_transitions[js->jtag_state].tms_low;
-
- ++count;
- }
- }
-
- if (js->jtag_state != state)
- status = -EREMOTEIO;
-
- return status;
-}
-
-int altera_wait_cycles(struct altera_state *astate,
- s32 cycles,
- enum altera_jtag_state wait_state)
-{
- struct altera_jtag *js = &astate->js;
- int tms;
- s32 count;
- int status = 0;
-
- if (js->jtag_state != wait_state)
- status = altera_goto_jstate(astate, wait_state);
-
- if (status == 0) {
- /*
- * Set TMS high to loop in RESET state
- * Set TMS low to loop in any other stable state
- */
- tms = (wait_state == RESET) ? TMS_HIGH : TMS_LOW;
-
- for (count = 0L; count < cycles; count++)
- alt_jtag_io(tms, TDI_LOW, IGNORE_TDO);
-
- }
-
- return status;
-}
-
-int altera_wait_msecs(struct altera_state *astate,
- s32 microseconds, enum altera_jtag_state wait_state)
-/*
- * Causes JTAG hardware to sit in the specified stable
- * state for the specified duration of real time. If
- * no JTAG operations have been performed yet, then only
- * a delay is performed. This permits the WAIT USECS
- * statement to be used in VECTOR programs without causing
- * any JTAG operations.
- * Returns 0 for success, else appropriate error code.
- */
-{
- struct altera_jtag *js = &astate->js;
- int status = 0;
-
- if ((js->jtag_state != ILLEGAL_JTAG_STATE) &&
- (js->jtag_state != wait_state))
- status = altera_goto_jstate(astate, wait_state);
-
- if (status == 0)
- /* Wait for specified time interval */
- udelay(microseconds);
-
- return status;
-}
-
-static void altera_concatenate_data(u8 *buffer,
- u8 *preamble_data,
- u32 preamble_count,
- u8 *target_data,
- u32 start_index,
- u32 target_count,
- u8 *postamble_data,
- u32 postamble_count)
-/*
- * Copies preamble data, target data, and postamble data
- * into one buffer for IR or DR scans.
- */
-{
- u32 i, j, k;
-
- for (i = 0L; i < preamble_count; ++i) {
- if (preamble_data[i >> 3L] & (1L << (i & 7L)))
- buffer[i >> 3L] |= (1L << (i & 7L));
- else
- buffer[i >> 3L] &= ~(u32)(1L << (i & 7L));
-
- }
-
- j = start_index;
- k = preamble_count + target_count;
- for (; i < k; ++i, ++j) {
- if (target_data[j >> 3L] & (1L << (j & 7L)))
- buffer[i >> 3L] |= (1L << (i & 7L));
- else
- buffer[i >> 3L] &= ~(u32)(1L << (i & 7L));
-
- }
-
- j = 0L;
- k = preamble_count + target_count + postamble_count;
- for (; i < k; ++i, ++j) {
- if (postamble_data[j >> 3L] & (1L << (j & 7L)))
- buffer[i >> 3L] |= (1L << (i & 7L));
- else
- buffer[i >> 3L] &= ~(u32)(1L << (i & 7L));
-
- }
-}
-
-static int alt_jtag_drscan(struct altera_state *astate,
- int start_state,
- int count,
- u8 *tdi,
- u8 *tdo)
-{
- int i = 0;
- int tdo_bit = 0;
- int status = 1;
-
- /* First go to DRSHIFT state */
- switch (start_state) {
- case 0: /* IDLE */
- alt_jtag_io(1, 0, 0); /* DRSELECT */
- alt_jtag_io(0, 0, 0); /* DRCAPTURE */
- alt_jtag_io(0, 0, 0); /* DRSHIFT */
- break;
-
- case 1: /* DRPAUSE */
- alt_jtag_io(1, 0, 0); /* DREXIT2 */
- alt_jtag_io(1, 0, 0); /* DRUPDATE */
- alt_jtag_io(1, 0, 0); /* DRSELECT */
- alt_jtag_io(0, 0, 0); /* DRCAPTURE */
- alt_jtag_io(0, 0, 0); /* DRSHIFT */
- break;
-
- case 2: /* IRPAUSE */
- alt_jtag_io(1, 0, 0); /* IREXIT2 */
- alt_jtag_io(1, 0, 0); /* IRUPDATE */
- alt_jtag_io(1, 0, 0); /* DRSELECT */
- alt_jtag_io(0, 0, 0); /* DRCAPTURE */
- alt_jtag_io(0, 0, 0); /* DRSHIFT */
- break;
-
- default:
- status = 0;
- }
-
- if (status) {
- /* loop in the SHIFT-DR state */
- for (i = 0; i < count; i++) {
- tdo_bit = alt_jtag_io(
- (i == count - 1),
- tdi[i >> 3] & (1 << (i & 7)),
- (tdo != NULL));
-
- if (tdo != NULL) {
- if (tdo_bit)
- tdo[i >> 3] |= (1 << (i & 7));
- else
- tdo[i >> 3] &= ~(u32)(1 << (i & 7));
-
- }
- }
-
- alt_jtag_io(0, 0, 0); /* DRPAUSE */
- }
-
- return status;
-}
-
-static int alt_jtag_irscan(struct altera_state *astate,
- int start_state,
- int count,
- u8 *tdi,
- u8 *tdo)
-{
- int i = 0;
- int tdo_bit = 0;
- int status = 1;
-
- /* First go to IRSHIFT state */
- switch (start_state) {
- case 0: /* IDLE */
- alt_jtag_io(1, 0, 0); /* DRSELECT */
- alt_jtag_io(1, 0, 0); /* IRSELECT */
- alt_jtag_io(0, 0, 0); /* IRCAPTURE */
- alt_jtag_io(0, 0, 0); /* IRSHIFT */
- break;
-
- case 1: /* DRPAUSE */
- alt_jtag_io(1, 0, 0); /* DREXIT2 */
- alt_jtag_io(1, 0, 0); /* DRUPDATE */
- alt_jtag_io(1, 0, 0); /* DRSELECT */
- alt_jtag_io(1, 0, 0); /* IRSELECT */
- alt_jtag_io(0, 0, 0); /* IRCAPTURE */
- alt_jtag_io(0, 0, 0); /* IRSHIFT */
- break;
-
- case 2: /* IRPAUSE */
- alt_jtag_io(1, 0, 0); /* IREXIT2 */
- alt_jtag_io(1, 0, 0); /* IRUPDATE */
- alt_jtag_io(1, 0, 0); /* DRSELECT */
- alt_jtag_io(1, 0, 0); /* IRSELECT */
- alt_jtag_io(0, 0, 0); /* IRCAPTURE */
- alt_jtag_io(0, 0, 0); /* IRSHIFT */
- break;
-
- default:
- status = 0;
- }
-
- if (status) {
- /* loop in the SHIFT-IR state */
- for (i = 0; i < count; i++) {
- tdo_bit = alt_jtag_io(
- (i == count - 1),
- tdi[i >> 3] & (1 << (i & 7)),
- (tdo != NULL));
- if (tdo != NULL) {
- if (tdo_bit)
- tdo[i >> 3] |= (1 << (i & 7));
- else
- tdo[i >> 3] &= ~(u32)(1 << (i & 7));
-
- }
- }
-
- alt_jtag_io(0, 0, 0); /* IRPAUSE */
- }
-
- return status;
-}
-
-static void altera_extract_target_data(u8 *buffer,
- u8 *target_data,
- u32 start_index,
- u32 preamble_count,
- u32 target_count)
-/*
- * Copies target data from scan buffer, filtering out
- * preamble and postamble data.
- */
-{
- u32 i;
- u32 j;
- u32 k;
-
- j = preamble_count;
- k = start_index + target_count;
- for (i = start_index; i < k; ++i, ++j) {
- if (buffer[j >> 3] & (1 << (j & 7)))
- target_data[i >> 3] |= (1 << (i & 7));
- else
- target_data[i >> 3] &= ~(u32)(1 << (i & 7));
-
- }
-}
-
-int altera_irscan(struct altera_state *astate,
- u32 count,
- u8 *tdi_data,
- u32 start_index)
-/* Shifts data into instruction register */
-{
- struct altera_jtag *js = &astate->js;
- int start_code = 0;
- u32 alloc_chars = 0;
- u32 shift_count = js->ir_pre + count + js->ir_post;
- int status = 0;
- enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
-
- switch (js->jtag_state) {
- case ILLEGAL_JTAG_STATE:
- case RESET:
- case IDLE:
- start_code = 0;
- start_state = IDLE;
- break;
-
- case DRSELECT:
- case DRCAPTURE:
- case DRSHIFT:
- case DREXIT1:
- case DRPAUSE:
- case DREXIT2:
- case DRUPDATE:
- start_code = 1;
- start_state = DRPAUSE;
- break;
-
- case IRSELECT:
- case IRCAPTURE:
- case IRSHIFT:
- case IREXIT1:
- case IRPAUSE:
- case IREXIT2:
- case IRUPDATE:
- start_code = 2;
- start_state = IRPAUSE;
- break;
-
- default:
- status = -EREMOTEIO;
- break;
- }
-
- if (status == 0)
- if (js->jtag_state != start_state)
- status = altera_goto_jstate(astate, start_state);
-
- if (status == 0) {
- if (shift_count > js->ir_length) {
- alloc_chars = (shift_count + 7) >> 3;
- kfree(js->ir_buffer);
- js->ir_buffer = (u8 *)alt_malloc(alloc_chars);
- if (js->ir_buffer == NULL)
- status = -ENOMEM;
- else
- js->ir_length = alloc_chars * 8;
-
- }
- }
-
- if (status == 0) {
- /*
- * Copy preamble data, IR data,
- * and postamble data into a buffer
- */
- altera_concatenate_data(js->ir_buffer,
- js->ir_pre_data,
- js->ir_pre,
- tdi_data,
- start_index,
- count,
- js->ir_post_data,
- js->ir_post);
- /* Do the IRSCAN */
- alt_jtag_irscan(astate,
- start_code,
- shift_count,
- js->ir_buffer,
- NULL);
-
- /* alt_jtag_irscan() always ends in IRPAUSE state */
- js->jtag_state = IRPAUSE;
- }
-
- if (status == 0)
- if (js->irstop_state != IRPAUSE)
- status = altera_goto_jstate(astate, js->irstop_state);
-
-
- return status;
-}
-
-int altera_swap_ir(struct altera_state *astate,
- u32 count,
- u8 *in_data,
- u32 in_index,
- u8 *out_data,
- u32 out_index)
-/* Shifts data into instruction register, capturing output data */
-{
- struct altera_jtag *js = &astate->js;
- int start_code = 0;
- u32 alloc_chars = 0;
- u32 shift_count = js->ir_pre + count + js->ir_post;
- int status = 0;
- enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
-
- switch (js->jtag_state) {
- case ILLEGAL_JTAG_STATE:
- case RESET:
- case IDLE:
- start_code = 0;
- start_state = IDLE;
- break;
-
- case DRSELECT:
- case DRCAPTURE:
- case DRSHIFT:
- case DREXIT1:
- case DRPAUSE:
- case DREXIT2:
- case DRUPDATE:
- start_code = 1;
- start_state = DRPAUSE;
- break;
-
- case IRSELECT:
- case IRCAPTURE:
- case IRSHIFT:
- case IREXIT1:
- case IRPAUSE:
- case IREXIT2:
- case IRUPDATE:
- start_code = 2;
- start_state = IRPAUSE;
- break;
-
- default:
- status = -EREMOTEIO;
- break;
- }
-
- if (status == 0)
- if (js->jtag_state != start_state)
- status = altera_goto_jstate(astate, start_state);
-
- if (status == 0) {
- if (shift_count > js->ir_length) {
- alloc_chars = (shift_count + 7) >> 3;
- kfree(js->ir_buffer);
- js->ir_buffer = (u8 *)alt_malloc(alloc_chars);
- if (js->ir_buffer == NULL)
- status = -ENOMEM;
- else
- js->ir_length = alloc_chars * 8;
-
- }
- }
-
- if (status == 0) {
- /*
- * Copy preamble data, IR data,
- * and postamble data into a buffer
- */
- altera_concatenate_data(js->ir_buffer,
- js->ir_pre_data,
- js->ir_pre,
- in_data,
- in_index,
- count,
- js->ir_post_data,
- js->ir_post);
-
- /* Do the IRSCAN */
- alt_jtag_irscan(astate,
- start_code,
- shift_count,
- js->ir_buffer,
- js->ir_buffer);
-
- /* alt_jtag_irscan() always ends in IRPAUSE state */
- js->jtag_state = IRPAUSE;
- }
-
- if (status == 0)
- if (js->irstop_state != IRPAUSE)
- status = altera_goto_jstate(astate, js->irstop_state);
-
-
- if (status == 0)
- /* Now extract the returned data from the buffer */
- altera_extract_target_data(js->ir_buffer,
- out_data, out_index,
- js->ir_pre, count);
-
- return status;
-}
-
-int altera_drscan(struct altera_state *astate,
- u32 count,
- u8 *tdi_data,
- u32 start_index)
-/* Shifts data into data register (ignoring output data) */
-{
- struct altera_jtag *js = &astate->js;
- int start_code = 0;
- u32 alloc_chars = 0;
- u32 shift_count = js->dr_pre + count + js->dr_post;
- int status = 0;
- enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
-
- switch (js->jtag_state) {
- case ILLEGAL_JTAG_STATE:
- case RESET:
- case IDLE:
- start_code = 0;
- start_state = IDLE;
- break;
-
- case DRSELECT:
- case DRCAPTURE:
- case DRSHIFT:
- case DREXIT1:
- case DRPAUSE:
- case DREXIT2:
- case DRUPDATE:
- start_code = 1;
- start_state = DRPAUSE;
- break;
-
- case IRSELECT:
- case IRCAPTURE:
- case IRSHIFT:
- case IREXIT1:
- case IRPAUSE:
- case IREXIT2:
- case IRUPDATE:
- start_code = 2;
- start_state = IRPAUSE;
- break;
-
- default:
- status = -EREMOTEIO;
- break;
- }
-
- if (status == 0)
- if (js->jtag_state != start_state)
- status = altera_goto_jstate(astate, start_state);
-
- if (status == 0) {
- if (shift_count > js->dr_length) {
- alloc_chars = (shift_count + 7) >> 3;
- kfree(js->dr_buffer);
- js->dr_buffer = (u8 *)alt_malloc(alloc_chars);
- if (js->dr_buffer == NULL)
- status = -ENOMEM;
- else
- js->dr_length = alloc_chars * 8;
-
- }
- }
-
- if (status == 0) {
- /*
- * Copy preamble data, DR data,
- * and postamble data into a buffer
- */
- altera_concatenate_data(js->dr_buffer,
- js->dr_pre_data,
- js->dr_pre,
- tdi_data,
- start_index,
- count,
- js->dr_post_data,
- js->dr_post);
- /* Do the DRSCAN */
- alt_jtag_drscan(astate, start_code, shift_count,
- js->dr_buffer, NULL);
- /* alt_jtag_drscan() always ends in DRPAUSE state */
- js->jtag_state = DRPAUSE;
- }
-
- if (status == 0)
- if (js->drstop_state != DRPAUSE)
- status = altera_goto_jstate(astate, js->drstop_state);
-
- return status;
-}
-
-int altera_swap_dr(struct altera_state *astate, u32 count,
- u8 *in_data, u32 in_index,
- u8 *out_data, u32 out_index)
-/* Shifts data into data register, capturing output data */
-{
- struct altera_jtag *js = &astate->js;
- int start_code = 0;
- u32 alloc_chars = 0;
- u32 shift_count = js->dr_pre + count + js->dr_post;
- int status = 0;
- enum altera_jtag_state start_state = ILLEGAL_JTAG_STATE;
-
- switch (js->jtag_state) {
- case ILLEGAL_JTAG_STATE:
- case RESET:
- case IDLE:
- start_code = 0;
- start_state = IDLE;
- break;
-
- case DRSELECT:
- case DRCAPTURE:
- case DRSHIFT:
- case DREXIT1:
- case DRPAUSE:
- case DREXIT2:
- case DRUPDATE:
- start_code = 1;
- start_state = DRPAUSE;
- break;
-
- case IRSELECT:
- case IRCAPTURE:
- case IRSHIFT:
- case IREXIT1:
- case IRPAUSE:
- case IREXIT2:
- case IRUPDATE:
- start_code = 2;
- start_state = IRPAUSE;
- break;
-
- default:
- status = -EREMOTEIO;
- break;
- }
-
- if (status == 0)
- if (js->jtag_state != start_state)
- status = altera_goto_jstate(astate, start_state);
-
- if (status == 0) {
- if (shift_count > js->dr_length) {
- alloc_chars = (shift_count + 7) >> 3;
- kfree(js->dr_buffer);
- js->dr_buffer = (u8 *)alt_malloc(alloc_chars);
-
- if (js->dr_buffer == NULL)
- status = -ENOMEM;
- else
- js->dr_length = alloc_chars * 8;
-
- }
- }
-
- if (status == 0) {
- /*
- * Copy preamble data, DR data,
- * and postamble data into a buffer
- */
- altera_concatenate_data(js->dr_buffer,
- js->dr_pre_data,
- js->dr_pre,
- in_data,
- in_index,
- count,
- js->dr_post_data,
- js->dr_post);
-
- /* Do the DRSCAN */
- alt_jtag_drscan(astate,
- start_code,
- shift_count,
- js->dr_buffer,
- js->dr_buffer);
-
- /* alt_jtag_drscan() always ends in DRPAUSE state */
- js->jtag_state = DRPAUSE;
- }
-
- if (status == 0)
- if (js->drstop_state != DRPAUSE)
- status = altera_goto_jstate(astate, js->drstop_state);
-
- if (status == 0)
- /* Now extract the returned data from the buffer */
- altera_extract_target_data(js->dr_buffer,
- out_data,
- out_index,
- js->dr_pre,
- count);
-
- return status;
-}
-
-void altera_free_buffers(struct altera_state *astate)
-{
- struct altera_jtag *js = &astate->js;
- /* If the JTAG interface was used, reset it to TLR */
- if (js->jtag_state != ILLEGAL_JTAG_STATE)
- altera_jreset_idle(astate);
-
- kfree(js->dr_pre_data);
- js->dr_pre_data = NULL;
-
- kfree(js->dr_post_data);
- js->dr_post_data = NULL;
-
- kfree(js->dr_buffer);
- js->dr_buffer = NULL;
-
- kfree(js->ir_pre_data);
- js->ir_pre_data = NULL;
-
- kfree(js->ir_post_data);
- js->ir_post_data = NULL;
-
- kfree(js->ir_buffer);
- js->ir_buffer = NULL;
-}
diff --git a/drivers/staging/altera-stapl/altera.c b/drivers/staging/altera-stapl/altera.c
deleted file mode 100644
index c2eff6a..0000000
--- a/drivers/staging/altera-stapl/altera.c
+++ /dev/null
@@ -1,2537 +0,0 @@
-/*
- * altera.c
- *
- * altera FPGA driver
- *
- * Copyright (C) Altera Corporation 1998-2001
- * Copyright (C) 2010,2011 NetUP Inc.
- * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/unaligned.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include "altera.h"
-#include "altera-exprt.h"
-#include "altera-jtag.h"
-
-static int debug = 1;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debugging information");
-
-MODULE_DESCRIPTION("altera FPGA kernel module");
-MODULE_AUTHOR("Igor M. Liplianin <liplianin@netup.ru>");
-MODULE_LICENSE("GPL");
-
-#define dprintk(args...) \
- if (debug) { \
- printk(KERN_DEBUG args); \
- }
-
-enum altera_fpga_opcode {
- OP_NOP = 0,
- OP_DUP,
- OP_SWP,
- OP_ADD,
- OP_SUB,
- OP_MULT,
- OP_DIV,
- OP_MOD,
- OP_SHL,
- OP_SHR,
- OP_NOT,
- OP_AND,
- OP_OR,
- OP_XOR,
- OP_INV,
- OP_GT,
- OP_LT,
- OP_RET,
- OP_CMPS,
- OP_PINT,
- OP_PRNT,
- OP_DSS,
- OP_DSSC,
- OP_ISS,
- OP_ISSC,
- OP_DPR = 0x1c,
- OP_DPRL,
- OP_DPO,
- OP_DPOL,
- OP_IPR,
- OP_IPRL,
- OP_IPO,
- OP_IPOL,
- OP_PCHR,
- OP_EXIT,
- OP_EQU,
- OP_POPT,
- OP_ABS = 0x2c,
- OP_BCH0,
- OP_PSH0 = 0x2f,
- OP_PSHL = 0x40,
- OP_PSHV,
- OP_JMP,
- OP_CALL,
- OP_NEXT,
- OP_PSTR,
- OP_SINT = 0x47,
- OP_ST,
- OP_ISTP,
- OP_DSTP,
- OP_SWPN,
- OP_DUPN,
- OP_POPV,
- OP_POPE,
- OP_POPA,
- OP_JMPZ,
- OP_DS,
- OP_IS,
- OP_DPRA,
- OP_DPOA,
- OP_IPRA,
- OP_IPOA,
- OP_EXPT,
- OP_PSHE,
- OP_PSHA,
- OP_DYNA,
- OP_EXPV = 0x5c,
- OP_COPY = 0x80,
- OP_REVA,
- OP_DSC,
- OP_ISC,
- OP_WAIT,
- OP_VS,
- OP_CMPA = 0xc0,
- OP_VSC,
-};
-
-struct altera_procinfo {
- char *name;
- u8 attrs;
- struct altera_procinfo *next;
-};
-
-/* This function checks if enough parameters are available on the stack. */
-static int altera_check_stack(int stack_ptr, int count, int *status)
-{
- if (stack_ptr < count) {
- *status = -EOVERFLOW;
- return 0;
- }
-
- return 1;
-}
-
-static void altera_export_int(char *key, s32 value)
-{
- dprintk("Export: key = \"%s\", value = %d\n", key, value);
-}
-
-#define HEX_LINE_CHARS 72
-#define HEX_LINE_BITS (HEX_LINE_CHARS * 4)
-
-static void altera_export_bool_array(char *key, u8 *data, s32 count)
-{
- char string[HEX_LINE_CHARS + 1];
- s32 i, offset;
- u32 size, line, lines, linebits, value, j, k;
-
- if (count > HEX_LINE_BITS) {
- dprintk("Export: key = \"%s\", %d bits, value = HEX\n",
- key, count);
- lines = (count + (HEX_LINE_BITS - 1)) / HEX_LINE_BITS;
-
- for (line = 0; line < lines; ++line) {
- if (line < (lines - 1)) {
- linebits = HEX_LINE_BITS;
- size = HEX_LINE_CHARS;
- offset = count - ((line + 1) * HEX_LINE_BITS);
- } else {
- linebits =
- count - ((lines - 1) * HEX_LINE_BITS);
- size = (linebits + 3) / 4;
- offset = 0L;
- }
-
- string[size] = '\0';
- j = size - 1;
- value = 0;
-
- for (k = 0; k < linebits; ++k) {
- i = k + offset;
- if (data[i >> 3] & (1 << (i & 7)))
- value |= (1 << (i & 3));
- if ((i & 3) == 3) {
- sprintf(&string[j], "%1x", value);
- value = 0;
- --j;
- }
- }
- if ((k & 3) > 0)
- sprintf(&string[j], "%1x", value);
-
- dprintk("%s\n", string);
- }
-
- } else {
- size = (count + 3) / 4;
- string[size] = '\0';
- j = size - 1;
- value = 0;
-
- for (i = 0; i < count; ++i) {
- if (data[i >> 3] & (1 << (i & 7)))
- value |= (1 << (i & 3));
- if ((i & 3) == 3) {
- sprintf(&string[j], "%1x", value);
- value = 0;
- --j;
- }
- }
- if ((i & 3) > 0)
- sprintf(&string[j], "%1x", value);
-
- dprintk("Export: key = \"%s\", %d bits, value = HEX %s\n",
- key, count, string);
- }
-}
-
-static int altera_execute(struct altera_state *astate,
- u8 *p,
- s32 program_size,
- s32 *error_address,
- int *exit_code,
- int *format_version)
-{
- struct altera_config *aconf = astate->config;
- char *msg_buff = astate->msg_buff;
- long *stack = astate->stack;
- int status = 0;
- u32 first_word = 0L;
- u32 action_table = 0L;
- u32 proc_table = 0L;
- u32 str_table = 0L;
- u32 sym_table = 0L;
- u32 data_sect = 0L;
- u32 code_sect = 0L;
- u32 debug_sect = 0L;
- u32 action_count = 0L;
- u32 proc_count = 0L;
- u32 sym_count = 0L;
- long *vars = NULL;
- s32 *var_size = NULL;
- char *attrs = NULL;
- u8 *proc_attributes = NULL;
- u32 pc;
- u32 opcode_address;
- u32 args[3];
- u32 opcode;
- u32 name_id;
- u8 charbuf[4];
- long long_tmp;
- u32 variable_id;
- u8 *charptr_tmp;
- u8 *charptr_tmp2;
- long *longptr_tmp;
- int version = 0;
- int delta = 0;
- int stack_ptr = 0;
- u32 arg_count;
- int done = 0;
- int bad_opcode = 0;
- u32 count;
- u32 index;
- u32 index2;
- s32 long_count;
- s32 long_idx;
- s32 long_idx2;
- u32 i;
- u32 j;
- u32 uncomp_size;
- u32 offset;
- u32 value;
- int current_proc = 0;
- int reverse;
-
- char *name;
-
- dprintk("%s\n", __func__);
-
- /* Read header information */
- if (program_size > 52L) {
- first_word = get_unaligned_be32(&p[0]);
- version = (first_word & 1L);
- *format_version = version + 1;
- delta = version * 8;
-
- action_table = get_unaligned_be32(&p[4]);
- proc_table = get_unaligned_be32(&p[8]);
- str_table = get_unaligned_be32(&p[4 + delta]);
- sym_table = get_unaligned_be32(&p[16 + delta]);
- data_sect = get_unaligned_be32(&p[20 + delta]);
- code_sect = get_unaligned_be32(&p[24 + delta]);
- debug_sect = get_unaligned_be32(&p[28 + delta]);
- action_count = get_unaligned_be32(&p[40 + delta]);
- proc_count = get_unaligned_be32(&p[44 + delta]);
- sym_count = get_unaligned_be32(&p[48 + (2 * delta)]);
- }
-
- if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L)) {
- done = 1;
- status = -EIO;
- goto exit_done;
- }
-
- if (sym_count <= 0)
- goto exit_done;
-
- vars = kzalloc(sym_count * sizeof(long), GFP_KERNEL);
-
- if (vars == NULL)
- status = -ENOMEM;
-
- if (status == 0) {
- var_size = kzalloc(sym_count * sizeof(s32), GFP_KERNEL);
-
- if (var_size == NULL)
- status = -ENOMEM;
- }
-
- if (status == 0) {
- attrs = kzalloc(sym_count, GFP_KERNEL);
-
- if (attrs == NULL)
- status = -ENOMEM;
- }
-
- if ((status == 0) && (version > 0)) {
- proc_attributes = kzalloc(proc_count, GFP_KERNEL);
-
- if (proc_attributes == NULL)
- status = -ENOMEM;
- }
-
- if (status != 0)
- goto exit_done;
-
- delta = version * 2;
-
- for (i = 0; i < sym_count; ++i) {
- offset = (sym_table + ((11 + delta) * i));
-
- value = get_unaligned_be32(&p[offset + 3 + delta]);
-
- attrs[i] = p[offset];
-
- /*
- * use bit 7 of attribute byte to indicate that
- * this buffer was dynamically allocated
- * and should be freed later
- */
- attrs[i] &= 0x7f;
-
- var_size[i] = get_unaligned_be32(&p[offset + 7 + delta]);
-
- /*
- * Attribute bits:
- * bit 0: 0 = read-only, 1 = read-write
- * bit 1: 0 = not compressed, 1 = compressed
- * bit 2: 0 = not initialized, 1 = initialized
- * bit 3: 0 = scalar, 1 = array
- * bit 4: 0 = Boolean, 1 = integer
- * bit 5: 0 = declared variable,
- * 1 = compiler created temporary variable
- */
-
- if ((attrs[i] & 0x0c) == 0x04)
- /* initialized scalar variable */
- vars[i] = value;
- else if ((attrs[i] & 0x1e) == 0x0e) {
- /* initialized compressed Boolean array */
- uncomp_size = get_unaligned_le32(&p[data_sect + value]);
-
- /* allocate a buffer for the uncompressed data */
- vars[i] = (long)kzalloc(uncomp_size, GFP_KERNEL);
- if (vars[i] == 0L)
- status = -ENOMEM;
- else {
- /* set flag so buffer will be freed later */
- attrs[i] |= 0x80;
-
- /* uncompress the data */
- if (altera_shrink(&p[data_sect + value],
- var_size[i],
- (u8 *)vars[i],
- uncomp_size,
- version) != uncomp_size)
- /* decompression failed */
- status = -EIO;
- else
- var_size[i] = uncomp_size * 8L;
-
- }
- } else if ((attrs[i] & 0x1e) == 0x0c) {
- /* initialized Boolean array */
- vars[i] = value + data_sect + (long)p;
- } else if ((attrs[i] & 0x1c) == 0x1c) {
- /* initialized integer array */
- vars[i] = value + data_sect;
- } else if ((attrs[i] & 0x0c) == 0x08) {
- /* uninitialized array */
-
- /* flag attrs so that memory is freed */
- attrs[i] |= 0x80;
-
- if (var_size[i] > 0) {
- u32 size;
-
- if (attrs[i] & 0x10)
- /* integer array */
- size = (var_size[i] * sizeof(s32));
- else
- /* Boolean array */
- size = ((var_size[i] + 7L) / 8L);
-
- vars[i] = (long)kzalloc(size, GFP_KERNEL);
-
- if (vars[i] == 0) {
- status = -ENOMEM;
- } else {
- /* zero out memory */
- for (j = 0; j < size; ++j)
- ((u8 *)(vars[i]))[j] = 0;
-
- }
- } else
- vars[i] = 0;
-
- } else
- vars[i] = 0;
-
- }
-
-exit_done:
- if (status != 0)
- done = 1;
-
- altera_jinit(astate);
-
- pc = code_sect;
- msg_buff[0] = '\0';
-
- /*
- * For JBC version 2, we will execute the procedures corresponding to
- * the selected ACTION
- */
- if (version > 0) {
- if (aconf->action == NULL) {
- status = -EINVAL;
- done = 1;
- } else {
- int action_found = 0;
- for (i = 0; (i < action_count) && !action_found; ++i) {
- name_id = get_unaligned_be32(&p[action_table +
- (12 * i)]);
-
- name = &p[str_table + name_id];
-
- if (strnicmp(aconf->action, name, strlen(name)) == 0) {
- action_found = 1;
- current_proc =
- get_unaligned_be32(&p[action_table +
- (12 * i) + 8]);
- }
- }
-
- if (!action_found) {
- status = -EINVAL;
- done = 1;
- }
- }
-
- if (status == 0) {
- int first_time = 1;
- i = current_proc;
- while ((i != 0) || first_time) {
- first_time = 0;
- /* check procedure attribute byte */
- proc_attributes[i] =
- (p[proc_table +
- (13 * i) + 8] &
- 0x03);
-
- /*
- * BIT0 - OPTIONAL
- * BIT1 - RECOMMENDED
- * BIT6 - FORCED OFF
- * BIT7 - FORCED ON
- */
-
- i = get_unaligned_be32(&p[proc_table +
- (13 * i) + 4]);
- }
-
- /*
- * Set current_proc to the first procedure
- * to be executed
- */
- i = current_proc;
- while ((i != 0) &&
- ((proc_attributes[i] == 1) ||
- ((proc_attributes[i] & 0xc0) == 0x40))) {
- i = get_unaligned_be32(&p[proc_table +
- (13 * i) + 4]);
- }
-
- if ((i != 0) || ((i == 0) && (current_proc == 0) &&
- ((proc_attributes[0] != 1) &&
- ((proc_attributes[0] & 0xc0) != 0x40)))) {
- current_proc = i;
- pc = code_sect +
- get_unaligned_be32(&p[proc_table +
- (13 * i) + 9]);
- if ((pc < code_sect) || (pc >= debug_sect))
- status = -ERANGE;
- } else
- /* there are no procedures to execute! */
- done = 1;
-
- }
- }
-
- msg_buff[0] = '\0';
-
- while (!done) {
- opcode = (p[pc] & 0xff);
- opcode_address = pc;
- ++pc;
-
- if (debug > 1)
- printk("opcode: %02x\n", opcode);
-
- arg_count = (opcode >> 6) & 3;
- for (i = 0; i < arg_count; ++i) {
- args[i] = get_unaligned_be32(&p[pc]);
- pc += 4;
- }
-
- switch (opcode) {
- case OP_NOP:
- break;
- case OP_DUP:
- if (altera_check_stack(stack_ptr, 1, &status)) {
- stack[stack_ptr] = stack[stack_ptr - 1];
- ++stack_ptr;
- }
- break;
- case OP_SWP:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- long_tmp = stack[stack_ptr - 2];
- stack[stack_ptr - 2] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
- break;
- case OP_ADD:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] += stack[stack_ptr];
- }
- break;
- case OP_SUB:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] -= stack[stack_ptr];
- }
- break;
- case OP_MULT:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] *= stack[stack_ptr];
- }
- break;
- case OP_DIV:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] /= stack[stack_ptr];
- }
- break;
- case OP_MOD:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] %= stack[stack_ptr];
- }
- break;
- case OP_SHL:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] <<= stack[stack_ptr];
- }
- break;
- case OP_SHR:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] >>= stack[stack_ptr];
- }
- break;
- case OP_NOT:
- if (altera_check_stack(stack_ptr, 1, &status))
- stack[stack_ptr - 1] ^= (-1L);
-
- break;
- case OP_AND:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] &= stack[stack_ptr];
- }
- break;
- case OP_OR:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] |= stack[stack_ptr];
- }
- break;
- case OP_XOR:
- if (altera_check_stack(stack_ptr, 2, &status)) {
- --stack_ptr;
- stack[stack_ptr - 1] ^= stack[stack_ptr];
- }
- break;
- case OP_INV:
- if (!altera_check_stack(stack_ptr, 1, &status))
- break;
- stack[stack_ptr - 1] = stack[stack_ptr - 1] ? 0L : 1L;
- break;
- case OP_GT:
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- --stack_ptr;
- stack[stack_ptr - 1] =
- (stack[stack_ptr - 1] > stack[stack_ptr]) ?
- 1L : 0L;
-
- break;
- case OP_LT:
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- --stack_ptr;
- stack[stack_ptr - 1] =
- (stack[stack_ptr - 1] < stack[stack_ptr]) ?
- 1L : 0L;
-
- break;
- case OP_RET:
- if ((version > 0) && (stack_ptr == 0)) {
- /*
- * We completed one of the main procedures
- * of an ACTION.
- * Find the next procedure
- * to be executed and jump to it.
- * If there are no more procedures, then EXIT.
- */
- i = get_unaligned_be32(&p[proc_table +
- (13 * current_proc) + 4]);
- while ((i != 0) &&
- ((proc_attributes[i] == 1) ||
- ((proc_attributes[i] & 0xc0) == 0x40)))
- i = get_unaligned_be32(&p[proc_table +
- (13 * i) + 4]);
-
- if (i == 0) {
- /* no procedures to execute! */
- done = 1;
- *exit_code = 0; /* success */
- } else {
- current_proc = i;
- pc = code_sect + get_unaligned_be32(
- &p[proc_table +
- (13 * i) + 9]);
- if ((pc < code_sect) ||
- (pc >= debug_sect))
- status = -ERANGE;
- }
-
- } else
- if (altera_check_stack(stack_ptr, 1, &status)) {
- pc = stack[--stack_ptr] + code_sect;
- if ((pc <= code_sect) ||
- (pc >= debug_sect))
- status = -ERANGE;
-
- }
-
- break;
- case OP_CMPS:
- /*
- * Array short compare
- * ...stack 0 is source 1 value
- * ...stack 1 is source 2 value
- * ...stack 2 is mask value
- * ...stack 3 is count
- */
- if (altera_check_stack(stack_ptr, 4, &status)) {
- s32 a = stack[--stack_ptr];
- s32 b = stack[--stack_ptr];
- long_tmp = stack[--stack_ptr];
- count = stack[stack_ptr - 1];
-
- if ((count < 1) || (count > 32))
- status = -ERANGE;
- else {
- long_tmp &= ((-1L) >> (32 - count));
-
- stack[stack_ptr - 1] =
- ((a & long_tmp) == (b & long_tmp))
- ? 1L : 0L;
- }
- }
- break;
- case OP_PINT:
- /*
- * PRINT add integer
- * ...stack 0 is integer value
- */
- if (!altera_check_stack(stack_ptr, 1, &status))
- break;
- sprintf(&msg_buff[strlen(msg_buff)],
- "%ld", stack[--stack_ptr]);
- break;
- case OP_PRNT:
- /* PRINT finish */
- if (debug)
- printk(msg_buff, "\n");
-
- msg_buff[0] = '\0';
- break;
- case OP_DSS:
- /*
- * DRSCAN short
- * ...stack 0 is scan data
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- long_tmp = stack[--stack_ptr];
- count = stack[--stack_ptr];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_drscan(astate, count, charbuf, 0);
- break;
- case OP_DSSC:
- /*
- * DRSCAN short with capture
- * ...stack 0 is scan data
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- long_tmp = stack[--stack_ptr];
- count = stack[stack_ptr - 1];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_swap_dr(astate, count, charbuf,
- 0, charbuf, 0);
- stack[stack_ptr - 1] = get_unaligned_le32(&charbuf[0]);
- break;
- case OP_ISS:
- /*
- * IRSCAN short
- * ...stack 0 is scan data
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- long_tmp = stack[--stack_ptr];
- count = stack[--stack_ptr];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_irscan(astate, count, charbuf, 0);
- break;
- case OP_ISSC:
- /*
- * IRSCAN short with capture
- * ...stack 0 is scan data
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- long_tmp = stack[--stack_ptr];
- count = stack[stack_ptr - 1];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_swap_ir(astate, count, charbuf,
- 0, charbuf, 0);
- stack[stack_ptr - 1] = get_unaligned_le32(&charbuf[0]);
- break;
- case OP_DPR:
- if (!altera_check_stack(stack_ptr, 1, &status))
- break;
- count = stack[--stack_ptr];
- status = altera_set_dr_pre(&astate->js, count, 0, NULL);
- break;
- case OP_DPRL:
- /*
- * DRPRE with literal data
- * ...stack 0 is count
- * ...stack 1 is literal data
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- count = stack[--stack_ptr];
- long_tmp = stack[--stack_ptr];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_set_dr_pre(&astate->js, count, 0,
- charbuf);
- break;
- case OP_DPO:
- /*
- * DRPOST
- * ...stack 0 is count
- */
- if (altera_check_stack(stack_ptr, 1, &status)) {
- count = stack[--stack_ptr];
- status = altera_set_dr_post(&astate->js, count,
- 0, NULL);
- }
- break;
- case OP_DPOL:
- /*
- * DRPOST with literal data
- * ...stack 0 is count
- * ...stack 1 is literal data
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- count = stack[--stack_ptr];
- long_tmp = stack[--stack_ptr];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_set_dr_post(&astate->js, count, 0,
- charbuf);
- break;
- case OP_IPR:
- if (altera_check_stack(stack_ptr, 1, &status)) {
- count = stack[--stack_ptr];
- status = altera_set_ir_pre(&astate->js, count,
- 0, NULL);
- }
- break;
- case OP_IPRL:
- /*
- * IRPRE with literal data
- * ...stack 0 is count
- * ...stack 1 is literal data
- */
- if (altera_check_stack(stack_ptr, 2, &status)) {
- count = stack[--stack_ptr];
- long_tmp = stack[--stack_ptr];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_set_ir_pre(&astate->js, count,
- 0, charbuf);
- }
- break;
- case OP_IPO:
- /*
- * IRPOST
- * ...stack 0 is count
- */
- if (altera_check_stack(stack_ptr, 1, &status)) {
- count = stack[--stack_ptr];
- status = altera_set_ir_post(&astate->js, count,
- 0, NULL);
- }
- break;
- case OP_IPOL:
- /*
- * IRPOST with literal data
- * ...stack 0 is count
- * ...stack 1 is literal data
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- count = stack[--stack_ptr];
- long_tmp = stack[--stack_ptr];
- put_unaligned_le32(long_tmp, &charbuf[0]);
- status = altera_set_ir_post(&astate->js, count, 0,
- charbuf);
- break;
- case OP_PCHR:
- if (altera_check_stack(stack_ptr, 1, &status)) {
- u8 ch;
- count = strlen(msg_buff);
- ch = (char) stack[--stack_ptr];
- if ((ch < 1) || (ch > 127)) {
- /*
- * character code out of range
- * instead of flagging an error,
- * force the value to 127
- */
- ch = 127;
- }
- msg_buff[count] = ch;
- msg_buff[count + 1] = '\0';
- }
- break;
- case OP_EXIT:
- if (altera_check_stack(stack_ptr, 1, &status))
- *exit_code = stack[--stack_ptr];
-
- done = 1;
- break;
- case OP_EQU:
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- --stack_ptr;
- stack[stack_ptr - 1] =
- (stack[stack_ptr - 1] == stack[stack_ptr]) ?
- 1L : 0L;
- break;
- case OP_POPT:
- if (altera_check_stack(stack_ptr, 1, &status))
- --stack_ptr;
-
- break;
- case OP_ABS:
- if (!altera_check_stack(stack_ptr, 1, &status))
- break;
- if (stack[stack_ptr - 1] < 0)
- stack[stack_ptr - 1] = 0 - stack[stack_ptr - 1];
-
- break;
- case OP_BCH0:
- /*
- * Batch operation 0
- * SWP
- * SWPN 7
- * SWP
- * SWPN 6
- * DUPN 8
- * SWPN 2
- * SWP
- * DUPN 6
- * DUPN 6
- */
-
- /* SWP */
- if (altera_check_stack(stack_ptr, 2, &status)) {
- long_tmp = stack[stack_ptr - 2];
- stack[stack_ptr - 2] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
-
- /* SWPN 7 */
- index = 7 + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- long_tmp = stack[stack_ptr - index];
- stack[stack_ptr - index] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
-
- /* SWP */
- if (altera_check_stack(stack_ptr, 2, &status)) {
- long_tmp = stack[stack_ptr - 2];
- stack[stack_ptr - 2] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
-
- /* SWPN 6 */
- index = 6 + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- long_tmp = stack[stack_ptr - index];
- stack[stack_ptr - index] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
-
- /* DUPN 8 */
- index = 8 + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- stack[stack_ptr] = stack[stack_ptr - index];
- ++stack_ptr;
- }
-
- /* SWPN 2 */
- index = 2 + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- long_tmp = stack[stack_ptr - index];
- stack[stack_ptr - index] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
-
- /* SWP */
- if (altera_check_stack(stack_ptr, 2, &status)) {
- long_tmp = stack[stack_ptr - 2];
- stack[stack_ptr - 2] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
-
- /* DUPN 6 */
- index = 6 + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- stack[stack_ptr] = stack[stack_ptr - index];
- ++stack_ptr;
- }
-
- /* DUPN 6 */
- index = 6 + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- stack[stack_ptr] = stack[stack_ptr - index];
- ++stack_ptr;
- }
- break;
- case OP_PSH0:
- stack[stack_ptr++] = 0;
- break;
- case OP_PSHL:
- stack[stack_ptr++] = (s32) args[0];
- break;
- case OP_PSHV:
- stack[stack_ptr++] = vars[args[0]];
- break;
- case OP_JMP:
- pc = args[0] + code_sect;
- if ((pc < code_sect) || (pc >= debug_sect))
- status = -ERANGE;
- break;
- case OP_CALL:
- stack[stack_ptr++] = pc;
- pc = args[0] + code_sect;
- if ((pc < code_sect) || (pc >= debug_sect))
- status = -ERANGE;
- break;
- case OP_NEXT:
- /*
- * Process FOR / NEXT loop
- * ...argument 0 is variable ID
- * ...stack 0 is step value
- * ...stack 1 is end value
- * ...stack 2 is top address
- */
- if (altera_check_stack(stack_ptr, 3, &status)) {
- s32 step = stack[stack_ptr - 1];
- s32 end = stack[stack_ptr - 2];
- s32 top = stack[stack_ptr - 3];
- s32 iterator = vars[args[0]];
- int break_out = 0;
-
- if (step < 0) {
- if (iterator <= end)
- break_out = 1;
- } else if (iterator >= end)
- break_out = 1;
-
- if (break_out) {
- stack_ptr -= 3;
- } else {
- vars[args[0]] = iterator + step;
- pc = top + code_sect;
- if ((pc < code_sect) ||
- (pc >= debug_sect))
- status = -ERANGE;
- }
- }
- break;
- case OP_PSTR:
- /*
- * PRINT add string
- * ...argument 0 is string ID
- */
- count = strlen(msg_buff);
- strlcpy(&msg_buff[count],
- &p[str_table + args[0]],
- ALTERA_MESSAGE_LENGTH - count);
- break;
- case OP_SINT:
- /*
- * STATE intermediate state
- * ...argument 0 is state code
- */
- status = altera_goto_jstate(astate, args[0]);
- break;
- case OP_ST:
- /*
- * STATE final state
- * ...argument 0 is state code
- */
- status = altera_goto_jstate(astate, args[0]);
- break;
- case OP_ISTP:
- /*
- * IRSTOP state
- * ...argument 0 is state code
- */
- status = altera_set_irstop(&astate->js, args[0]);
- break;
- case OP_DSTP:
- /*
- * DRSTOP state
- * ...argument 0 is state code
- */
- status = altera_set_drstop(&astate->js, args[0]);
- break;
-
- case OP_SWPN:
- /*
- * Exchange top with Nth stack value
- * ...argument 0 is 0-based stack entry
- * to swap with top element
- */
- index = (args[0]) + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- long_tmp = stack[stack_ptr - index];
- stack[stack_ptr - index] = stack[stack_ptr - 1];
- stack[stack_ptr - 1] = long_tmp;
- }
- break;
- case OP_DUPN:
- /*
- * Duplicate Nth stack value
- * ...argument 0 is 0-based stack entry to duplicate
- */
- index = (args[0]) + 1;
- if (altera_check_stack(stack_ptr, index, &status)) {
- stack[stack_ptr] = stack[stack_ptr - index];
- ++stack_ptr;
- }
- break;
- case OP_POPV:
- /*
- * Pop stack into scalar variable
- * ...argument 0 is variable ID
- * ...stack 0 is value
- */
- if (altera_check_stack(stack_ptr, 1, &status))
- vars[args[0]] = stack[--stack_ptr];
-
- break;
- case OP_POPE:
- /*
- * Pop stack into integer array element
- * ...argument 0 is variable ID
- * ...stack 0 is array index
- * ...stack 1 is value
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- variable_id = args[0];
-
- /*
- * If variable is read-only,
- * convert to writable array
- */
- if ((version > 0) &&
- ((attrs[variable_id] & 0x9c) == 0x1c)) {
- /* Allocate a writable buffer for this array */
- count = var_size[variable_id];
- long_tmp = vars[variable_id];
- longptr_tmp = kzalloc(count * sizeof(long),
- GFP_KERNEL);
- vars[variable_id] = (long)longptr_tmp;
-
- if (vars[variable_id] == 0) {
- status = -ENOMEM;
- break;
- }
-
- /* copy previous contents into buffer */
- for (i = 0; i < count; ++i) {
- longptr_tmp[i] =
- get_unaligned_be32(&p[long_tmp]);
- long_tmp += sizeof(long);
- }
-
- /*
- * set bit 7 - buffer was
- * dynamically allocated
- */
- attrs[variable_id] |= 0x80;
-
- /* clear bit 2 - variable is writable */
- attrs[variable_id] &= ~0x04;
- attrs[variable_id] |= 0x01;
-
- }
-
- /* check that variable is a writable integer array */
- if ((attrs[variable_id] & 0x1c) != 0x18)
- status = -ERANGE;
- else {
- longptr_tmp = (long *)vars[variable_id];
-
- /* pop the array index */
- index = stack[--stack_ptr];
-
- /* pop the value and store it into the array */
- longptr_tmp[index] = stack[--stack_ptr];
- }
-
- break;
- case OP_POPA:
- /*
- * Pop stack into Boolean array
- * ...argument 0 is variable ID
- * ...stack 0 is count
- * ...stack 1 is array index
- * ...stack 2 is value
- */
- if (!altera_check_stack(stack_ptr, 3, &status))
- break;
- variable_id = args[0];
-
- /*
- * If variable is read-only,
- * convert to writable array
- */
- if ((version > 0) &&
- ((attrs[variable_id] & 0x9c) == 0x0c)) {
- /* Allocate a writable buffer for this array */
- long_tmp =
- (var_size[variable_id] + 7L) >> 3L;
- charptr_tmp2 = (u8 *)vars[variable_id];
- charptr_tmp =
- kzalloc(long_tmp, GFP_KERNEL);
- vars[variable_id] = (long)charptr_tmp;
-
- if (vars[variable_id] == 0) {
- status = -ENOMEM;
- break;
- }
-
- /* zero the buffer */
- for (long_idx = 0L;
- long_idx < long_tmp;
- ++long_idx) {
- charptr_tmp[long_idx] = 0;
- }
-
- /* copy previous contents into buffer */
- for (long_idx = 0L;
- long_idx < var_size[variable_id];
- ++long_idx) {
- long_idx2 = long_idx;
-
- if (charptr_tmp2[long_idx2 >> 3] &
- (1 << (long_idx2 & 7))) {
- charptr_tmp[long_idx >> 3] |=
- (1 << (long_idx & 7));
- }
- }
-
- /*
- * set bit 7 - buffer was
- * dynamically allocated
- */
- attrs[variable_id] |= 0x80;
-
- /* clear bit 2 - variable is writable */
- attrs[variable_id] &= ~0x04;
- attrs[variable_id] |= 0x01;
-
- }
-
- /*
- * check that variable is
- * a writable Boolean array
- */
- if ((attrs[variable_id] & 0x1c) != 0x08) {
- status = -ERANGE;
- break;
- }
-
- charptr_tmp = (u8 *)vars[variable_id];
-
- /* pop the count (number of bits to copy) */
- long_count = stack[--stack_ptr];
-
- /* pop the array index */
- long_idx = stack[--stack_ptr];
-
- reverse = 0;
-
- if (version > 0) {
- /*
- * stack 0 = array right index
- * stack 1 = array left index
- */
-
- if (long_idx > long_count) {
- reverse = 1;
- long_tmp = long_count;
- long_count = 1 + long_idx -
- long_count;
- long_idx = long_tmp;
-
- /* reverse POPA is not supported */
- status = -ERANGE;
- break;
- } else
- long_count = 1 + long_count -
- long_idx;
-
- }
-
- /* pop the data */
- long_tmp = stack[--stack_ptr];
-
- if (long_count < 1) {
- status = -ERANGE;
- break;
- }
-
- for (i = 0; i < long_count; ++i) {
- if (long_tmp & (1L << (s32) i))
- charptr_tmp[long_idx >> 3L] |=
- (1L << (long_idx & 7L));
- else
- charptr_tmp[long_idx >> 3L] &=
- ~(1L << (long_idx & 7L));
-
- ++long_idx;
- }
-
- break;
- case OP_JMPZ:
- /*
- * Pop stack and branch if zero
- * ...argument 0 is address
- * ...stack 0 is condition value
- */
- if (altera_check_stack(stack_ptr, 1, &status)) {
- if (stack[--stack_ptr] == 0) {
- pc = args[0] + code_sect;
- if ((pc < code_sect) ||
- (pc >= debug_sect))
- status = -ERANGE;
- }
- }
- break;
- case OP_DS:
- case OP_IS:
- /*
- * DRSCAN
- * IRSCAN
- * ...argument 0 is scan data variable ID
- * ...stack 0 is array index
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- long_idx = stack[--stack_ptr];
- long_count = stack[--stack_ptr];
- reverse = 0;
- if (version > 0) {
- /*
- * stack 0 = array right index
- * stack 1 = array left index
- * stack 2 = count
- */
- long_tmp = long_count;
- long_count = stack[--stack_ptr];
-
- if (long_idx > long_tmp) {
- reverse = 1;
- long_idx = long_tmp;
- }
- }
-
- charptr_tmp = (u8 *)vars[args[0]];
-
- if (reverse) {
- /*
- * allocate a buffer
- * and reverse the data order
- */
- charptr_tmp2 = charptr_tmp;
- charptr_tmp = kzalloc((long_count >> 3) + 1,
- GFP_KERNEL);
- if (charptr_tmp == NULL) {
- status = -ENOMEM;
- break;
- }
-
- long_tmp = long_idx + long_count - 1;
- long_idx2 = 0;
- while (long_idx2 < long_count) {
- if (charptr_tmp2[long_tmp >> 3] &
- (1 << (long_tmp & 7)))
- charptr_tmp[long_idx2 >> 3] |=
- (1 << (long_idx2 & 7));
- else
- charptr_tmp[long_idx2 >> 3] &=
- ~(1 << (long_idx2 & 7));
-
- --long_tmp;
- ++long_idx2;
- }
- }
-
- if (opcode == 0x51) /* DS */
- status = altera_drscan(astate, long_count,
- charptr_tmp, long_idx);
- else /* IS */
- status = altera_irscan(astate, long_count,
- charptr_tmp, long_idx);
-
- if (reverse)
- kfree(charptr_tmp);
-
- break;
- case OP_DPRA:
- /*
- * DRPRE with array data
- * ...argument 0 is variable ID
- * ...stack 0 is array index
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- index = stack[--stack_ptr];
- count = stack[--stack_ptr];
-
- if (version > 0)
- /*
- * stack 0 = array right index
- * stack 1 = array left index
- */
- count = 1 + count - index;
-
- charptr_tmp = (u8 *)vars[args[0]];
- status = altera_set_dr_pre(&astate->js, count, index,
- charptr_tmp);
- break;
- case OP_DPOA:
- /*
- * DRPOST with array data
- * ...argument 0 is variable ID
- * ...stack 0 is array index
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- index = stack[--stack_ptr];
- count = stack[--stack_ptr];
-
- if (version > 0)
- /*
- * stack 0 = array right index
- * stack 1 = array left index
- */
- count = 1 + count - index;
-
- charptr_tmp = (u8 *)vars[args[0]];
- status = altera_set_dr_post(&astate->js, count, index,
- charptr_tmp);
- break;
- case OP_IPRA:
- /*
- * IRPRE with array data
- * ...argument 0 is variable ID
- * ...stack 0 is array index
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- index = stack[--stack_ptr];
- count = stack[--stack_ptr];
-
- if (version > 0)
- /*
- * stack 0 = array right index
- * stack 1 = array left index
- */
- count = 1 + count - index;
-
- charptr_tmp = (u8 *)vars[args[0]];
- status = altera_set_ir_pre(&astate->js, count, index,
- charptr_tmp);
-
- break;
- case OP_IPOA:
- /*
- * IRPOST with array data
- * ...argument 0 is variable ID
- * ...stack 0 is array index
- * ...stack 1 is count
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- index = stack[--stack_ptr];
- count = stack[--stack_ptr];
-
- if (version > 0)
- /*
- * stack 0 = array right index
- * stack 1 = array left index
- */
- count = 1 + count - index;
-
- charptr_tmp = (u8 *)vars[args[0]];
- status = altera_set_ir_post(&astate->js, count, index,
- charptr_tmp);
-
- break;
- case OP_EXPT:
- /*
- * EXPORT
- * ...argument 0 is string ID
- * ...stack 0 is integer expression
- */
- if (altera_check_stack(stack_ptr, 1, &status)) {
- name = &p[str_table + args[0]];
- long_tmp = stack[--stack_ptr];
- altera_export_int(name, long_tmp);
- }
- break;
- case OP_PSHE:
- /*
- * Push integer array element
- * ...argument 0 is variable ID
- * ...stack 0 is array index
- */
- if (!altera_check_stack(stack_ptr, 1, &status))
- break;
- variable_id = args[0];
- index = stack[stack_ptr - 1];
-
- /* check variable type */
- if ((attrs[variable_id] & 0x1f) == 0x19) {
- /* writable integer array */
- longptr_tmp = (long *)vars[variable_id];
- stack[stack_ptr - 1] = longptr_tmp[index];
- } else if ((attrs[variable_id] & 0x1f) == 0x1c) {
- /* read-only integer array */
- long_tmp = vars[variable_id] +
- (index * sizeof(long));
- stack[stack_ptr - 1] =
- get_unaligned_be32(&p[long_tmp]);
- } else
- status = -ERANGE;
-
- break;
- case OP_PSHA:
- /*
- * Push Boolean array
- * ...argument 0 is variable ID
- * ...stack 0 is count
- * ...stack 1 is array index
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- variable_id = args[0];
-
- /* check that variable is a Boolean array */
- if ((attrs[variable_id] & 0x18) != 0x08) {
- status = -ERANGE;
- break;
- }
-
- charptr_tmp = (u8 *)vars[variable_id];
-
- /* pop the count (number of bits to copy) */
- count = stack[--stack_ptr];
-
- /* pop the array index */
- index = stack[stack_ptr - 1];
-
- if (version > 0)
- /*
- * stack 0 = array right index
- * stack 1 = array left index
- */
- count = 1 + count - index;
-
- if ((count < 1) || (count > 32)) {
- status = -ERANGE;
- break;
- }
-
- long_tmp = 0L;
-
- for (i = 0; i < count; ++i)
- if (charptr_tmp[(i + index) >> 3] &
- (1 << ((i + index) & 7)))
- long_tmp |= (1L << i);
-
- stack[stack_ptr - 1] = long_tmp;
-
- break;
- case OP_DYNA:
- /*
- * Dynamically change size of array
- * ...argument 0 is variable ID
- * ...stack 0 is new size
- */
- if (!altera_check_stack(stack_ptr, 1, &status))
- break;
- variable_id = args[0];
- long_tmp = stack[--stack_ptr];
-
- if (long_tmp > var_size[variable_id]) {
- var_size[variable_id] = long_tmp;
-
- if (attrs[variable_id] & 0x10)
- /* allocate integer array */
- long_tmp *= sizeof(long);
- else
- /* allocate Boolean array */
- long_tmp = (long_tmp + 7) >> 3;
-
- /*
- * If the buffer was previously allocated,
- * free it
- */
- if (attrs[variable_id] & 0x80) {
- kfree((void *)vars[variable_id]);
- vars[variable_id] = 0;
- }
-
- /*
- * Allocate a new buffer
- * of the requested size
- */
- vars[variable_id] = (long)
- kzalloc(long_tmp, GFP_KERNEL);
-
- if (vars[variable_id] == 0) {
- status = -ENOMEM;
- break;
- }
-
- /*
- * Set the attribute bit to indicate that
- * this buffer was dynamically allocated and
- * should be freed later
- */
- attrs[variable_id] |= 0x80;
-
- /* zero out memory */
- count = ((var_size[variable_id] + 7L) /
- 8L);
- charptr_tmp = (u8 *)(vars[variable_id]);
- for (index = 0; index < count; ++index)
- charptr_tmp[index] = 0;
-
- }
-
- break;
- case OP_EXPV:
- /*
- * Export Boolean array
- * ...argument 0 is string ID
- * ...stack 0 is variable ID
- * ...stack 1 is array right index
- * ...stack 2 is array left index
- */
- if (!altera_check_stack(stack_ptr, 3, &status))
- break;
- if (version == 0) {
- /* EXPV is not supported in JBC 1.0 */
- bad_opcode = 1;
- break;
- }
- name = &p[str_table + args[0]];
- variable_id = stack[--stack_ptr];
- long_idx = stack[--stack_ptr];/* right indx */
- long_idx2 = stack[--stack_ptr];/* left indx */
-
- if (long_idx > long_idx2) {
- /* reverse indices not supported */
- status = -ERANGE;
- break;
- }
-
- long_count = 1 + long_idx2 - long_idx;
-
- charptr_tmp = (u8 *)vars[variable_id];
- charptr_tmp2 = NULL;
-
- if ((long_idx & 7L) != 0) {
- s32 k = long_idx;
- charptr_tmp2 =
- kzalloc(((long_count + 7L) / 8L),
- GFP_KERNEL);
- if (charptr_tmp2 == NULL) {
- status = -ENOMEM;
- break;
- }
-
- for (i = 0; i < long_count; ++i) {
- if (charptr_tmp[k >> 3] &
- (1 << (k & 7)))
- charptr_tmp2[i >> 3] |=
- (1 << (i & 7));
- else
- charptr_tmp2[i >> 3] &=
- ~(1 << (i & 7));
-
- ++k;
- }
- charptr_tmp = charptr_tmp2;
-
- } else if (long_idx != 0)
- charptr_tmp = &charptr_tmp[long_idx >> 3];
-
- altera_export_bool_array(name, charptr_tmp,
- long_count);
-
- /* free allocated buffer */
- if ((long_idx & 7L) != 0)
- kfree(charptr_tmp2);
-
- break;
- case OP_COPY: {
- /*
- * Array copy
- * ...argument 0 is dest ID
- * ...argument 1 is source ID
- * ...stack 0 is count
- * ...stack 1 is dest index
- * ...stack 2 is source index
- */
- s32 copy_count;
- s32 copy_index;
- s32 copy_index2;
- s32 destleft;
- s32 src_count;
- s32 dest_count;
- int src_reverse = 0;
- int dest_reverse = 0;
-
- if (!altera_check_stack(stack_ptr, 3, &status))
- break;
-
- copy_count = stack[--stack_ptr];
- copy_index = stack[--stack_ptr];
- copy_index2 = stack[--stack_ptr];
- reverse = 0;
-
- if (version > 0) {
- /*
- * stack 0 = source right index
- * stack 1 = source left index
- * stack 2 = destination right index
- * stack 3 = destination left index
- */
- destleft = stack[--stack_ptr];
-
- if (copy_count > copy_index) {
- src_reverse = 1;
- reverse = 1;
- src_count = 1 + copy_count - copy_index;
- /* copy_index = source start index */
- } else {
- src_count = 1 + copy_index - copy_count;
- /* source start index */
- copy_index = copy_count;
- }
-
- if (copy_index2 > destleft) {
- dest_reverse = 1;
- reverse = !reverse;
- dest_count = 1 + copy_index2 - destleft;
- /* destination start index */
- copy_index2 = destleft;
- } else
- dest_count = 1 + destleft - copy_index2;
-
- copy_count = (src_count < dest_count) ?
- src_count : dest_count;
-
- if ((src_reverse || dest_reverse) &&
- (src_count != dest_count))
- /*
- * If either the source or destination
- * is reversed, we can't tolerate
- * a length mismatch, because we
- * "left justify" arrays when copying.
- * This won't work correctly
- * with reversed arrays.
- */
- status = -ERANGE;
-
- }
-
- count = copy_count;
- index = copy_index;
- index2 = copy_index2;
-
- /*
- * If destination is a read-only array,
- * allocate a buffer and convert it to a writable array
- */
- variable_id = args[1];
- if ((version > 0) &&
- ((attrs[variable_id] & 0x9c) == 0x0c)) {
- /* Allocate a writable buffer for this array */
- long_tmp =
- (var_size[variable_id] + 7L) >> 3L;
- charptr_tmp2 = (u8 *)vars[variable_id];
- charptr_tmp =
- kzalloc(long_tmp, GFP_KERNEL);
- vars[variable_id] = (long)charptr_tmp;
-
- if (vars[variable_id] == 0) {
- status = -ENOMEM;
- break;
- }
-
- /* zero the buffer */
- for (long_idx = 0L; long_idx < long_tmp;
- ++long_idx)
- charptr_tmp[long_idx] = 0;
-
- /* copy previous contents into buffer */
- for (long_idx = 0L;
- long_idx < var_size[variable_id];
- ++long_idx) {
- long_idx2 = long_idx;
-
- if (charptr_tmp2[long_idx2 >> 3] &
- (1 << (long_idx2 & 7)))
- charptr_tmp[long_idx >> 3] |=
- (1 << (long_idx & 7));
-
- }
-
- /*
- set bit 7 - buffer was dynamically allocated */
- attrs[variable_id] |= 0x80;
-
- /* clear bit 2 - variable is writable */
- attrs[variable_id] &= ~0x04;
- attrs[variable_id] |= 0x01;
- }
-
- charptr_tmp = (u8 *)vars[args[1]];
- charptr_tmp2 = (u8 *)vars[args[0]];
-
- /* check if destination is a writable Boolean array */
- if ((attrs[args[1]] & 0x1c) != 0x08) {
- status = -ERANGE;
- break;
- }
-
- if (count < 1) {
- status = -ERANGE;
- break;
- }
-
- if (reverse)
- index2 += (count - 1);
-
- for (i = 0; i < count; ++i) {
- if (charptr_tmp2[index >> 3] &
- (1 << (index & 7)))
- charptr_tmp[index2 >> 3] |=
- (1 << (index2 & 7));
- else
- charptr_tmp[index2 >> 3] &=
- ~(1 << (index2 & 7));
-
- ++index;
- if (reverse)
- --index2;
- else
- ++index2;
- }
-
- break;
- }
- case OP_DSC:
- case OP_ISC: {
- /*
- * DRSCAN with capture
- * IRSCAN with capture
- * ...argument 0 is scan data variable ID
- * ...argument 1 is capture variable ID
- * ...stack 0 is capture index
- * ...stack 1 is scan data index
- * ...stack 2 is count
- */
- s32 scan_right, scan_left;
- s32 capture_count = 0;
- s32 scan_count = 0;
- s32 capture_index;
- s32 scan_index;
-
- if (!altera_check_stack(stack_ptr, 3, &status))
- break;
-
- capture_index = stack[--stack_ptr];
- scan_index = stack[--stack_ptr];
-
- if (version > 0) {
- /*
- * stack 0 = capture right index
- * stack 1 = capture left index
- * stack 2 = scan right index
- * stack 3 = scan left index
- * stack 4 = count
- */
- scan_right = stack[--stack_ptr];
- scan_left = stack[--stack_ptr];
- capture_count = 1 + scan_index - capture_index;
- scan_count = 1 + scan_left - scan_right;
- scan_index = scan_right;
- }
-
- long_count = stack[--stack_ptr];
- /*
- * If capture array is read-only, allocate a buffer
- * and convert it to a writable array
- */
- variable_id = args[1];
- if ((version > 0) &&
- ((attrs[variable_id] & 0x9c) == 0x0c)) {
- /* Allocate a writable buffer for this array */
- long_tmp =
- (var_size[variable_id] + 7L) >> 3L;
- charptr_tmp2 = (u8 *)vars[variable_id];
- charptr_tmp =
- kzalloc(long_tmp, GFP_KERNEL);
- vars[variable_id] = (long)charptr_tmp;
-
- if (vars[variable_id] == 0) {
- status = -ENOMEM;
- break;
- }
-
- /* zero the buffer */
- for (long_idx = 0L; long_idx < long_tmp;
- ++long_idx)
- charptr_tmp[long_idx] = 0;
-
- /* copy previous contents into buffer */
- for (long_idx = 0L;
- long_idx < var_size[variable_id];
- ++long_idx) {
- long_idx2 = long_idx;
-
- if (charptr_tmp2[long_idx2 >> 3] &
- (1 << (long_idx2 & 7)))
- charptr_tmp[long_idx >> 3] |=
- (1 << (long_idx & 7));
-
- }
-
- /*
- * set bit 7 - buffer was
- * dynamically allocated
- */
- attrs[variable_id] |= 0x80;
-
- /* clear bit 2 - variable is writable */
- attrs[variable_id] &= ~0x04;
- attrs[variable_id] |= 0x01;
-
- }
-
- charptr_tmp = (u8 *)vars[args[0]];
- charptr_tmp2 = (u8 *)vars[args[1]];
-
- if ((version > 0) &&
- ((long_count > capture_count) ||
- (long_count > scan_count))) {
- status = -ERANGE;
- break;
- }
-
- /*
- * check that capture array
- * is a writable Boolean array
- */
- if ((attrs[args[1]] & 0x1c) != 0x08) {
- status = -ERANGE;
- break;
- }
-
- if (status == 0) {
- if (opcode == 0x82) /* DSC */
- status = altera_swap_dr(astate,
- long_count,
- charptr_tmp,
- scan_index,
- charptr_tmp2,
- capture_index);
- else /* ISC */
- status = altera_swap_ir(astate,
- long_count,
- charptr_tmp,
- scan_index,
- charptr_tmp2,
- capture_index);
-
- }
-
- break;
- }
- case OP_WAIT:
- /*
- * WAIT
- * ...argument 0 is wait state
- * ...argument 1 is end state
- * ...stack 0 is cycles
- * ...stack 1 is microseconds
- */
- if (!altera_check_stack(stack_ptr, 2, &status))
- break;
- long_tmp = stack[--stack_ptr];
-
- if (long_tmp != 0L)
- status = altera_wait_cycles(astate, long_tmp,
- args[0]);
-
- long_tmp = stack[--stack_ptr];
-
- if ((status == 0) && (long_tmp != 0L))
- status = altera_wait_msecs(astate,
- long_tmp,
- args[0]);
-
- if ((status == 0) && (args[1] != args[0]))
- status = altera_goto_jstate(astate,
- args[1]);
-
- if (version > 0) {
- --stack_ptr; /* throw away MAX cycles */
- --stack_ptr; /* throw away MAX microseconds */
- }
- break;
- case OP_CMPA: {
- /*
- * Array compare
- * ...argument 0 is source 1 ID
- * ...argument 1 is source 2 ID
- * ...argument 2 is mask ID
- * ...stack 0 is source 1 index
- * ...stack 1 is source 2 index
- * ...stack 2 is mask index
- * ...stack 3 is count
- */
- s32 a, b;
- u8 *source1 = (u8 *)vars[args[0]];
- u8 *source2 = (u8 *)vars[args[1]];
- u8 *mask = (u8 *)vars[args[2]];
- u32 index1;
- u32 index2;
- u32 mask_index;
-
- if (!altera_check_stack(stack_ptr, 4, &status))
- break;
-
- index1 = stack[--stack_ptr];
- index2 = stack[--stack_ptr];
- mask_index = stack[--stack_ptr];
- long_count = stack[--stack_ptr];
-
- if (version > 0) {
- /*
- * stack 0 = source 1 right index
- * stack 1 = source 1 left index
- * stack 2 = source 2 right index
- * stack 3 = source 2 left index
- * stack 4 = mask right index
- * stack 5 = mask left index
- */
- s32 mask_right = stack[--stack_ptr];
- s32 mask_left = stack[--stack_ptr];
- /* source 1 count */
- a = 1 + index2 - index1;
- /* source 2 count */
- b = 1 + long_count - mask_index;
- a = (a < b) ? a : b;
- /* mask count */
- b = 1 + mask_left - mask_right;
- a = (a < b) ? a : b;
- /* source 2 start index */
- index2 = mask_index;
- /* mask start index */
- mask_index = mask_right;
- long_count = a;
- }
-
- long_tmp = 1L;
-
- if (long_count < 1)
- status = -ERANGE;
- else {
- count = long_count;
-
- for (i = 0; i < count; ++i) {
- if (mask[mask_index >> 3] &
- (1 << (mask_index & 7))) {
- a = source1[index1 >> 3] &
- (1 << (index1 & 7))
- ? 1 : 0;
- b = source2[index2 >> 3] &
- (1 << (index2 & 7))
- ? 1 : 0;
-
- if (a != b) /* failure */
- long_tmp = 0L;
- }
- ++index1;
- ++index2;
- ++mask_index;
- }
- }
-
- stack[stack_ptr++] = long_tmp;
-
- break;
- }
- default:
- /* Unrecognized opcode -- ERROR! */
- bad_opcode = 1;
- break;
- }
-
- if (bad_opcode)
- status = -ENOSYS;
-
- if ((stack_ptr < 0) || (stack_ptr >= ALTERA_STACK_SIZE))
- status = -EOVERFLOW;
-
- if (status != 0) {
- done = 1;
- *error_address = (s32)(opcode_address - code_sect);
- }
- }
-
- altera_free_buffers(astate);
-
- /* Free all dynamically allocated arrays */
- if ((attrs != NULL) && (vars != NULL))
- for (i = 0; i < sym_count; ++i)
- if (attrs[i] & 0x80)
- kfree((void *)vars[i]);
-
- kfree(vars);
- kfree(var_size);
- kfree(attrs);
- kfree(proc_attributes);
-
- return status;
-}
-
-static int altera_get_note(u8 *p, s32 program_size,
- s32 *offset, char *key, char *value, int length)
-/*
- * Gets key and value of NOTE fields in the JBC file.
- * Can be called in two modes: if offset pointer is NULL,
- * then the function searches for note fields which match
- * the key string provided. If offset is not NULL, then
- * the function finds the next note field of any key,
- * starting at the offset specified by the offset pointer.
- * Returns 0 for success, else appropriate error code
- */
-{
- int status = -ENODATA;
- u32 note_strings = 0L;
- u32 note_table = 0L;
- u32 note_count = 0L;
- u32 first_word = 0L;
- int version = 0;
- int delta = 0;
- char *key_ptr;
- char *value_ptr;
- int i;
-
- /* Read header information */
- if (program_size > 52L) {
- first_word = get_unaligned_be32(&p[0]);
- version = (first_word & 1L);
- delta = version * 8;
-
- note_strings = get_unaligned_be32(&p[8 + delta]);
- note_table = get_unaligned_be32(&p[12 + delta]);
- note_count = get_unaligned_be32(&p[44 + (2 * delta)]);
- }
-
- if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L))
- return -EIO;
-
- if (note_count <= 0L)
- return status;
-
- if (offset == NULL) {
- /*
- * We will search for the first note with a specific key,
- * and return only the value
- */
- for (i = 0; (i < note_count) &&
- (status != 0); ++i) {
- key_ptr = &p[note_strings +
- get_unaligned_be32(
- &p[note_table + (8 * i)])];
- if ((strnicmp(key, key_ptr, strlen(key_ptr)) == 0) &&
- (key != NULL)) {
- status = 0;
-
- value_ptr = &p[note_strings +
- get_unaligned_be32(
- &p[note_table + (8 * i) + 4])];
-
- if (value != NULL)
- strlcpy(value, value_ptr, length);
-
- }
- }
- } else {
- /*
- * We will search for the next note, regardless of the key,
- * and return both the value and the key
- */
-
- i = *offset;
-
- if ((i >= 0) && (i < note_count)) {
- status = 0;
-
- if (key != NULL)
- strlcpy(key, &p[note_strings +
- get_unaligned_be32(
- &p[note_table + (8 * i)])],
- length);
-
- if (value != NULL)
- strlcpy(value, &p[note_strings +
- get_unaligned_be32(
- &p[note_table + (8 * i) + 4])],
- length);
-
- *offset = i + 1;
- }
- }
-
- return status;
-}
-
-static int altera_check_crc(u8 *p, s32 program_size)
-{
- int status = 0;
- u16 local_expected = 0,
- local_actual = 0,
- shift_reg = 0xffff;
- int bit, feedback;
- u8 databyte;
- u32 i;
- u32 crc_section = 0L;
- u32 first_word = 0L;
- int version = 0;
- int delta = 0;
-
- if (program_size > 52L) {
- first_word = get_unaligned_be32(&p[0]);
- version = (first_word & 1L);
- delta = version * 8;
-
- crc_section = get_unaligned_be32(&p[32 + delta]);
- }
-
- if ((first_word != 0x4A414D00L) && (first_word != 0x4A414D01L))
- status = -EIO;
-
- if (crc_section >= program_size)
- status = -EIO;
-
- if (status == 0) {
- local_expected = (u16)get_unaligned_be16(&p[crc_section]);
-
- for (i = 0; i < crc_section; ++i) {
- databyte = p[i];
- for (bit = 0; bit < 8; bit++) {
- feedback = (databyte ^ shift_reg) & 0x01;
- shift_reg >>= 1;
- if (feedback)
- shift_reg ^= 0x8408;
-
- databyte >>= 1;
- }
- }
-
- local_actual = (u16)~shift_reg;
-
- if (local_expected != local_actual)
- status = -EILSEQ;
-
- }
-
- if (debug || status) {
- switch (status) {
- case 0:
- printk(KERN_INFO "%s: CRC matched: %04x\n", __func__,
- local_actual);
- break;
- case -EILSEQ:
- printk(KERN_ERR "%s: CRC mismatch: expected %04x, "
- "actual %04x\n", __func__, local_expected,
- local_actual);
- break;
- case -ENODATA:
- printk(KERN_ERR "%s: expected CRC not found, "
- "actual CRC = %04x\n", __func__,
- local_actual);
- break;
- case -EIO:
- printk(KERN_ERR "%s: error: format isn't "
- "recognized.\n", __func__);
- break;
- default:
- printk(KERN_ERR "%s: CRC function returned error "
- "code %d\n", __func__, status);
- break;
- }
- }
-
- return status;
-}
-
-static int altera_get_file_info(u8 *p,
- s32 program_size,
- int *format_version,
- int *action_count,
- int *procedure_count)
-{
- int status = -EIO;
- u32 first_word = 0;
- int version = 0;
-
- if (program_size <= 52L)
- return status;
-
- first_word = get_unaligned_be32(&p[0]);
-
- if ((first_word == 0x4A414D00L) || (first_word == 0x4A414D01L)) {
- status = 0;
-
- version = (first_word & 1L);
- *format_version = version + 1;
-
- if (version > 0) {
- *action_count = get_unaligned_be32(&p[48]);
- *procedure_count = get_unaligned_be32(&p[52]);
- }
- }
-
- return status;
-}
-
-static int altera_get_act_info(u8 *p,
- s32 program_size,
- int index,
- char **name,
- char **description,
- struct altera_procinfo **proc_list)
-{
- int status = -EIO;
- struct altera_procinfo *procptr = NULL;
- struct altera_procinfo *tmpptr = NULL;
- u32 first_word = 0L;
- u32 action_table = 0L;
- u32 proc_table = 0L;
- u32 str_table = 0L;
- u32 note_strings = 0L;
- u32 action_count = 0L;
- u32 proc_count = 0L;
- u32 act_name_id = 0L;
- u32 act_desc_id = 0L;
- u32 act_proc_id = 0L;
- u32 act_proc_name = 0L;
- u8 act_proc_attribute = 0;
-
- if (program_size <= 52L)
- return status;
- /* Read header information */
- first_word = get_unaligned_be32(&p[0]);
-
- if (first_word != 0x4A414D01L)
- return status;
-
- action_table = get_unaligned_be32(&p[4]);
- proc_table = get_unaligned_be32(&p[8]);
- str_table = get_unaligned_be32(&p[12]);
- note_strings = get_unaligned_be32(&p[16]);
- action_count = get_unaligned_be32(&p[48]);
- proc_count = get_unaligned_be32(&p[52]);
-
- if (index >= action_count)
- return status;
-
- act_name_id = get_unaligned_be32(&p[action_table + (12 * index)]);
- act_desc_id = get_unaligned_be32(&p[action_table + (12 * index) + 4]);
- act_proc_id = get_unaligned_be32(&p[action_table + (12 * index) + 8]);
-
- *name = &p[str_table + act_name_id];
-
- if (act_desc_id < (note_strings - str_table))
- *description = &p[str_table + act_desc_id];
-
- do {
- act_proc_name = get_unaligned_be32(
- &p[proc_table + (13 * act_proc_id)]);
- act_proc_attribute =
- (p[proc_table + (13 * act_proc_id) + 8] & 0x03);
-
- procptr =
- kzalloc(sizeof(struct altera_procinfo),
- GFP_KERNEL);
-
- if (procptr == NULL)
- status = -ENOMEM;
- else {
- procptr->name = &p[str_table + act_proc_name];
- procptr->attrs = act_proc_attribute;
- procptr->next = NULL;
-
- /* add record to end of linked list */
- if (*proc_list == NULL)
- *proc_list = procptr;
- else {
- tmpptr = *proc_list;
- while (tmpptr->next != NULL)
- tmpptr = tmpptr->next;
- tmpptr->next = procptr;
- }
- }
-
- act_proc_id = get_unaligned_be32(
- &p[proc_table + (13 * act_proc_id) + 4]);
- } while ((act_proc_id != 0) && (act_proc_id < proc_count));
-
- return status;
-}
-
-int altera_init(struct altera_config *config, const struct firmware *fw)
-{
- struct altera_state *astate = NULL;
- struct altera_procinfo *proc_list = NULL;
- struct altera_procinfo *procptr = NULL;
- char *key = NULL;
- char *value = NULL;
- char *action_name = NULL;
- char *description = NULL;
- int exec_result = 0;
- int exit_code = 0;
- int format_version = 0;
- int action_count = 0;
- int procedure_count = 0;
- int index = 0;
- s32 offset = 0L;
- s32 error_address = 0L;
- int retval = 0;
-
- key = kzalloc(33, GFP_KERNEL);
- if (!key) {
- retval = -ENOMEM;
- goto out;
- }
- value = kzalloc(257, GFP_KERNEL);
- if (!value) {
- retval = -ENOMEM;
- goto free_key;
- }
- astate = kzalloc(sizeof(struct altera_state), GFP_KERNEL);
- if (!astate) {
- retval = -ENOMEM;
- goto free_value;
- }
-
- astate->config = config;
- if (!astate->config->jtag_io) {
- dprintk(KERN_INFO "%s: using byteblaster!\n", __func__);
- astate->config->jtag_io = netup_jtag_io_lpt;
- }
-
- altera_check_crc((u8 *)fw->data, fw->size);
-
- if (debug) {
- altera_get_file_info((u8 *)fw->data, fw->size, &format_version,
- &action_count, &procedure_count);
- printk(KERN_INFO "%s: File format is %s ByteCode format\n",
- __func__, (format_version == 2) ? "Jam STAPL" :
- "pre-standardized Jam 1.1");
- while (altera_get_note((u8 *)fw->data, fw->size,
- &offset, key, value, 256) == 0)
- printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n",
- __func__, key, value);
- }
-
- if (debug && (format_version == 2) && (action_count > 0)) {
- printk(KERN_INFO "%s: Actions available:\n", __func__);
- for (index = 0; index < action_count; ++index) {
- altera_get_act_info((u8 *)fw->data, fw->size,
- index, &action_name,
- &description,
- &proc_list);
-
- if (description == NULL)
- printk(KERN_INFO "%s: %s\n",
- __func__,
- action_name);
- else
- printk(KERN_INFO "%s: %s \"%s\"\n",
- __func__,
- action_name,
- description);
-
- procptr = proc_list;
- while (procptr != NULL) {
- if (procptr->attrs != 0)
- printk(KERN_INFO "%s: %s (%s)\n",
- __func__,
- procptr->name,
- (procptr->attrs == 1) ?
- "optional" : "recommended");
-
- proc_list = procptr->next;
- kfree(procptr);
- procptr = proc_list;
- }
- }
-
- printk(KERN_INFO "\n");
- }
-
- exec_result = altera_execute(astate, (u8 *)fw->data, fw->size,
- &error_address, &exit_code, &format_version);
-
- if (exit_code)
- exec_result = -EREMOTEIO;
-
- if ((format_version == 2) && (exec_result == -EINVAL)) {
- if (astate->config->action == NULL)
- printk(KERN_ERR "%s: error: no action specified for "
- "Jam STAPL file.\nprogram terminated.\n",
- __func__);
- else
- printk(KERN_ERR "%s: error: action \"%s\""
- " is not supported "
- "for this Jam STAPL file.\n"
- "Program terminated.\n", __func__,
- astate->config->action);
-
- } else if (exec_result)
- printk(KERN_ERR "%s: error %d\n", __func__, exec_result);
-
- kfree(astate);
-free_value:
- kfree(value);
-free_key:
- kfree(key);
-out:
- return retval;
-}
-EXPORT_SYMBOL(altera_init);
diff --git a/drivers/staging/dt3155v4l/dt3155v4l.c b/drivers/staging/dt3155v4l/dt3155v4l.c
index 5b212dc..04e93c4 100644
--- a/drivers/staging/dt3155v4l/dt3155v4l.c
+++ b/drivers/staging/dt3155v4l/dt3155v4l.c
@@ -193,7 +193,7 @@
struct vb2_buffer *vb = pd->curr_buf;
dma_addr_t dma_addr;
- dma_addr = vb2_dma_contig_plane_paddr(vb, 0);
+ dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
iowrite32(dma_addr, pd->regs + EVEN_DMA_START);
iowrite32(dma_addr + img_width, pd->regs + ODD_DMA_START);
iowrite32(img_width, pd->regs + EVEN_DMA_STRIDE);
@@ -357,7 +357,7 @@
ivb = list_first_entry(&ipd->dmaq, typeof(*ivb), done_entry);
list_del(&ivb->done_entry);
ipd->curr_buf = ivb;
- dma_addr = vb2_dma_contig_plane_paddr(ivb, 0);
+ dma_addr = vb2_dma_contig_plane_dma_addr(ivb, 0);
iowrite32(dma_addr, ipd->regs + EVEN_DMA_START);
iowrite32(dma_addr + img_width, ipd->regs + ODD_DMA_START);
iowrite32(img_width, ipd->regs + EVEN_DMA_STRIDE);
diff --git a/drivers/staging/hv/Makefile b/drivers/staging/hv/Makefile
index e071c12..0f55cee 100644
--- a/drivers/staging/hv/Makefile
+++ b/drivers/staging/hv/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_HYPERV) += hv_timesource.o
obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o
obj-$(CONFIG_HYPERV_NET) += hv_netvsc.o
obj-$(CONFIG_HYPERV_MOUSE) += hv_mouse.o
diff --git a/drivers/staging/hv/hv_timesource.c b/drivers/staging/hv/hv_timesource.c
deleted file mode 100644
index 2b0f9aa..0000000
--- a/drivers/staging/hv/hv_timesource.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * A clocksource for Linux running on HyperV.
- *
- *
- * Copyright (C) 2010, Novell, Inc.
- * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/clocksource.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dmi.h>
-#include <asm/hyperv.h>
-#include <asm/mshyperv.h>
-#include <asm/hypervisor.h>
-
-#define HV_CLOCK_SHIFT 22
-
-static cycle_t read_hv_clock(struct clocksource *arg)
-{
- cycle_t current_tick;
- /*
- * Read the partition counter to get the current tick count. This count
- * is set to 0 when the partition is created and is incremented in
- * 100 nanosecond units.
- */
- rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
- return current_tick;
-}
-
-static struct clocksource hyperv_cs = {
- .name = "hyperv_clocksource",
- .rating = 400, /* use this when running on Hyperv*/
- .read = read_hv_clock,
- .mask = CLOCKSOURCE_MASK(64),
- /*
- * The time ref counter in HyperV is in 100ns units.
- * The definition of mult is:
- * mult/2^shift = ns/cyc = 100
- * mult = (100 << shift)
- */
- .mult = (100 << HV_CLOCK_SHIFT),
- .shift = HV_CLOCK_SHIFT,
-};
-
-static const struct dmi_system_id __initconst
-hv_timesource_dmi_table[] __maybe_unused = {
- {
- .ident = "Hyper-V",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
- DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
- },
- },
- { },
-};
-MODULE_DEVICE_TABLE(dmi, hv_timesource_dmi_table);
-
-static const struct pci_device_id __initconst
-hv_timesource_pci_table[] __maybe_unused = {
- { PCI_DEVICE(0x1414, 0x5353) }, /* VGA compatible controller */
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, hv_timesource_pci_table);
-
-
-static int __init init_hv_clocksource(void)
-{
- if ((x86_hyper != &x86_hyper_ms_hyperv) ||
- !(ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE))
- return -ENODEV;
-
- if (!dmi_check_system(hv_timesource_dmi_table))
- return -ENODEV;
-
- pr_info("Registering HyperV clock source\n");
- return clocksource_register(&hyperv_cs);
-}
-
-module_init(init_hv_clocksource);
-MODULE_DESCRIPTION("HyperV based clocksource");
-MODULE_AUTHOR("K. Y. Srinivasan <ksrinivasan@novell.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/trigger.h b/drivers/staging/iio/trigger.h
index 598fcb3..5cc42a6 100644
--- a/drivers/staging/iio/trigger.h
+++ b/drivers/staging/iio/trigger.h
@@ -115,8 +115,7 @@
irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private);
-struct iio_trigger *iio_allocate_trigger(const char *fmt, ...)
- __attribute__((format(printf, 1, 2)));
+__printf(1, 2) struct iio_trigger *iio_allocate_trigger(const char *fmt, ...);
void iio_free_trigger(struct iio_trigger *trig);
#endif /* _IIO_TRIGGER_H_ */
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index f3c6060..7a19555 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1197,7 +1197,7 @@
void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info)
{
inode->i_mode = info->mode;
- inode->i_nlink = info->nlink;
+ set_nlink(inode, info->nlink);
inode->i_uid = info->uid;
inode->i_gid = info->gid;
inode->i_blocks = info->blocks;
diff --git a/drivers/staging/tm6000/README b/drivers/staging/tm6000/README
deleted file mode 100644
index c340ebc..0000000
--- a/drivers/staging/tm6000/README
+++ /dev/null
@@ -1,22 +0,0 @@
-Todo:
- - Fix the loss of some blocks when receiving the video URB's
- - Add a lock at tm6000_read_write_usb() to prevent two simultaneous access to the
- URB control transfers
- - Properly add the locks at tm6000-video
- - Add audio support
- - Add vbi support
- - Add IR support
- - Do several cleanups
- - I think that frame1/frame0 are inverted. This causes a funny effect at the image.
- the fix is trivial, but require some tests
- - My tm6010 devices sometimes insist on stop working. I need to turn them off, removing
- from my machine and wait for a while for it to work again. I'm starting to think that
- it is an overheat issue - is there a workaround that we could do?
- - Sometimes, tm6010 doesn't read eeprom at the proper time (hardware bug). So, the device
- got miss-detected as a "generic" tm6000. This can be really bad if the tuner is the
- Low Power one, as it may result on loading the high power firmware, that could damage
- the device. Maybe we may read eeprom to double check, when the device is marked as "generic"
- - Coding Style fixes
- - sparse cleanups
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/tm6000/TODO b/drivers/staging/tm6000/TODO
deleted file mode 100644
index 135d0ea..0000000
--- a/drivers/staging/tm6000/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-There a few things to do before putting this driver in production:
- - IR NEC with tm5600/6000 TV cards
- - IR RC5 with tm5600/6000/6010 TV cards
- - CodingStyle;
- - Fix audio;
- - Fix some panic/OOPS conditions.
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
deleted file mode 100644
index bd5fa89..0000000
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- *
- * Support for audio capture for tm5600/6000/6010
- * (c) 2007-2008 Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * Based on cx88-alsa.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/control.h>
-#include <sound/initval.h>
-
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-#undef dprintk
-
-#define dprintk(level, fmt, arg...) do { \
- if (debug >= level) \
- printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \
- } while (0)
-
-/****************************************************************************
- Module global static vars
- ****************************************************************************/
-
-static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
-
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
-
-module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled.");
-
-module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s).");
-
-
-/****************************************************************************
- Module macros
- ****************************************************************************/
-
-MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},"
- "{{Trident,tm6000},"
- "{{Trident,tm6010}");
-static unsigned int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug messages");
-
-/****************************************************************************
- Module specific funtions
- ****************************************************************************/
-
-/*
- * BOARD Specific: Sets audio DMA
- */
-
-static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
-{
- struct tm6000_core *core = chip->core;
-
- dprintk(1, "Starting audio DMA\n");
-
- /* Enables audio */
- tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x40, 0x40);
-
- tm6000_set_audio_bitrate(core, 48000);
-
- return 0;
-}
-
-/*
- * BOARD Specific: Resets audio DMA
- */
-static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip)
-{
- struct tm6000_core *core = chip->core;
-
- dprintk(1, "Stopping audio DMA\n");
-
- /* Disables audio */
- tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x00, 0x40);
-
- return 0;
-}
-
-static void dsp_buffer_free(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-
- dprintk(2, "Freeing buffer\n");
-
- vfree(substream->runtime->dma_area);
- substream->runtime->dma_area = NULL;
- substream->runtime->dma_bytes = 0;
-}
-
-static int dsp_buffer_alloc(struct snd_pcm_substream *substream, int size)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-
- dprintk(2, "Allocating buffer\n");
-
- if (substream->runtime->dma_area) {
- if (substream->runtime->dma_bytes > size)
- return 0;
-
- dsp_buffer_free(substream);
- }
-
- substream->runtime->dma_area = vmalloc(size);
- if (!substream->runtime->dma_area)
- return -ENOMEM;
-
- substream->runtime->dma_bytes = size;
-
- return 0;
-}
-
-
-/****************************************************************************
- ALSA PCM Interface
- ****************************************************************************/
-
-/*
- * Digital hardware definition
- */
-#define DEFAULT_FIFO_SIZE 4096
-
-static struct snd_pcm_hardware snd_tm6000_digital_hw = {
- .info = SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
-
- .rates = SNDRV_PCM_RATE_CONTINUOUS,
- .rate_min = 48000,
- .rate_max = 48000,
- .channels_min = 2,
- .channels_max = 2,
- .period_bytes_min = 64,
- .period_bytes_max = 12544,
- .periods_min = 1,
- .periods_max = 98,
- .buffer_bytes_max = 62720 * 8,
-};
-
-/*
- * audio pcm capture open callback
- */
-static int snd_tm6000_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
- int err;
-
- err = snd_pcm_hw_constraint_pow2(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (err < 0)
- goto _error;
-
- chip->substream = substream;
-
- runtime->hw = snd_tm6000_digital_hw;
-
- return 0;
-_error:
- dprintk(1, "Error opening PCM!\n");
- return err;
-}
-
-/*
- * audio close callback
- */
-static int snd_tm6000_close(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
- struct tm6000_core *core = chip->core;
-
- if (atomic_read(&core->stream_started) > 0) {
- atomic_set(&core->stream_started, 0);
- schedule_work(&core->wq_trigger);
- }
-
- return 0;
-}
-
-static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
-{
- struct snd_tm6000_card *chip = core->adev;
- struct snd_pcm_substream *substream = chip->substream;
- struct snd_pcm_runtime *runtime;
- int period_elapsed = 0;
- unsigned int stride, buf_pos;
- int length;
-
- if (atomic_read(&core->stream_started) == 0)
- return 0;
-
- if (!size || !substream) {
- dprintk(1, "substream was NULL\n");
- return -EINVAL;
- }
-
- runtime = substream->runtime;
- if (!runtime || !runtime->dma_area) {
- dprintk(1, "runtime was NULL\n");
- return -EINVAL;
- }
-
- buf_pos = chip->buf_pos;
- stride = runtime->frame_bits >> 3;
-
- if (stride == 0) {
- dprintk(1, "stride is zero\n");
- return -EINVAL;
- }
-
- length = size / stride;
- if (length == 0) {
- dprintk(1, "%s: length was zero\n", __func__);
- return -EINVAL;
- }
-
- dprintk(1, "Copying %d bytes at %p[%d] - buf size=%d x %d\n", size,
- runtime->dma_area, buf_pos,
- (unsigned int)runtime->buffer_size, stride);
-
- if (buf_pos + length >= runtime->buffer_size) {
- unsigned int cnt = runtime->buffer_size - buf_pos;
- memcpy(runtime->dma_area + buf_pos * stride, buf, cnt * stride);
- memcpy(runtime->dma_area, buf + cnt * stride,
- length * stride - cnt * stride);
- } else
- memcpy(runtime->dma_area + buf_pos * stride, buf,
- length * stride);
-
- snd_pcm_stream_lock(substream);
-
- chip->buf_pos += length;
- if (chip->buf_pos >= runtime->buffer_size)
- chip->buf_pos -= runtime->buffer_size;
-
- chip->period_pos += length;
- if (chip->period_pos >= runtime->period_size) {
- chip->period_pos -= runtime->period_size;
- period_elapsed = 1;
- }
-
- snd_pcm_stream_unlock(substream);
-
- if (period_elapsed)
- snd_pcm_period_elapsed(substream);
-
- return 0;
-}
-
-/*
- * hw_params callback
- */
-static int snd_tm6000_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- int size, rc;
-
- size = params_period_bytes(hw_params) * params_periods(hw_params);
-
- rc = dsp_buffer_alloc(substream, size);
- if (rc < 0)
- return rc;
-
- return 0;
-}
-
-/*
- * hw free callback
- */
-static int snd_tm6000_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
- struct tm6000_core *core = chip->core;
-
- if (atomic_read(&core->stream_started) > 0) {
- atomic_set(&core->stream_started, 0);
- schedule_work(&core->wq_trigger);
- }
-
- return 0;
-}
-
-/*
- * prepare callback
- */
-static int snd_tm6000_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-
- chip->buf_pos = 0;
- chip->period_pos = 0;
-
- return 0;
-}
-
-
-/*
- * trigger callback
- */
-static void audio_trigger(struct work_struct *work)
-{
- struct tm6000_core *core = container_of(work, struct tm6000_core,
- wq_trigger);
- struct snd_tm6000_card *chip = core->adev;
-
- if (atomic_read(&core->stream_started)) {
- dprintk(1, "starting capture");
- _tm6000_start_audio_dma(chip);
- } else {
- dprintk(1, "stopping capture");
- _tm6000_stop_audio_dma(chip);
- }
-}
-
-static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
- struct tm6000_core *core = chip->core;
- int err = 0;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- atomic_set(&core->stream_started, 1);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- atomic_set(&core->stream_started, 0);
- break;
- default:
- err = -EINVAL;
- break;
- }
- schedule_work(&core->wq_trigger);
-
- return err;
-}
-/*
- * pointer callback
- */
-static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
-
- return chip->buf_pos;
-}
-
-/*
- * operators
- */
-static struct snd_pcm_ops snd_tm6000_pcm_ops = {
- .open = snd_tm6000_pcm_open,
- .close = snd_tm6000_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_tm6000_hw_params,
- .hw_free = snd_tm6000_hw_free,
- .prepare = snd_tm6000_prepare,
- .trigger = snd_tm6000_card_trigger,
- .pointer = snd_tm6000_pointer,
-};
-
-/*
- * create a PCM device
- */
-
-/* FIXME: Control interface - How to control volume/mute? */
-
-/****************************************************************************
- Basic Flow for Sound Devices
- ****************************************************************************/
-
-/*
- * Alsa Constructor - Component probe
- */
-int tm6000_audio_init(struct tm6000_core *dev)
-{
- struct snd_card *card;
- struct snd_tm6000_card *chip;
- int rc;
- static int devnr;
- char component[14];
- struct snd_pcm *pcm;
-
- if (!dev)
- return 0;
-
- if (devnr >= SNDRV_CARDS)
- return -ENODEV;
-
- if (!enable[devnr])
- return -ENOENT;
-
- rc = snd_card_create(index[devnr], "tm6000", THIS_MODULE, 0, &card);
- if (rc < 0) {
- snd_printk(KERN_ERR "cannot create card instance %d\n", devnr);
- return rc;
- }
- strcpy(card->driver, "tm6000-alsa");
- strcpy(card->shortname, "TM5600/60x0");
- sprintf(card->longname, "TM5600/60x0 Audio at bus %d device %d",
- dev->udev->bus->busnum, dev->udev->devnum);
-
- sprintf(component, "USB%04x:%04x",
- le16_to_cpu(dev->udev->descriptor.idVendor),
- le16_to_cpu(dev->udev->descriptor.idProduct));
- snd_component_add(card, component);
- snd_card_set_dev(card, &dev->udev->dev);
-
- chip = kzalloc(sizeof(struct snd_tm6000_card), GFP_KERNEL);
- if (!chip) {
- rc = -ENOMEM;
- goto error;
- }
-
- chip->core = dev;
- chip->card = card;
- dev->adev = chip;
- spin_lock_init(&chip->reg_lock);
-
- rc = snd_pcm_new(card, "TM6000 Audio", 0, 0, 1, &pcm);
- if (rc < 0)
- goto error_chip;
-
- pcm->info_flags = 0;
- pcm->private_data = chip;
- strcpy(pcm->name, "Trident TM5600/60x0");
-
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops);
-
- INIT_WORK(&dev->wq_trigger, audio_trigger);
- rc = snd_card_register(card);
- if (rc < 0)
- goto error_chip;
-
- dprintk(1, "Registered audio driver for %s\n", card->longname);
-
- return 0;
-
-error_chip:
- kfree(chip);
- dev->adev = NULL;
-error:
- snd_card_free(card);
- return rc;
-}
-
-static int tm6000_audio_fini(struct tm6000_core *dev)
-{
- struct snd_tm6000_card *chip = dev->adev;
-
- if (!dev)
- return 0;
-
- if (!chip)
- return 0;
-
- if (!chip->card)
- return 0;
-
- snd_card_free(chip->card);
- chip->card = NULL;
- kfree(chip);
- dev->adev = NULL;
-
- return 0;
-}
-
-struct tm6000_ops audio_ops = {
- .type = TM6000_AUDIO,
- .name = "TM6000 Audio Extension",
- .init = tm6000_audio_init,
- .fini = tm6000_audio_fini,
- .fillbuf = tm6000_fillbuf,
-};
-
-static int __init tm6000_alsa_register(void)
-{
- return tm6000_register_extension(&audio_ops);
-}
-
-static void __exit tm6000_alsa_unregister(void)
-{
- tm6000_unregister_extension(&audio_ops);
-}
-
-module_init(tm6000_alsa_register);
-module_exit(tm6000_alsa_unregister);
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
deleted file mode 100644
index 9227db5..0000000
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ /dev/null
@@ -1,1382 +0,0 @@
-/*
- * tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/usb.h>
-#include <linux/slab.h>
-#include <media/v4l2-common.h>
-#include <media/tuner.h>
-#include <media/tvaudio.h>
-#include <media/i2c-addr.h>
-#include <media/rc-map.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-#include "tuner-xc2028.h"
-#include "xc5000.h"
-
-#define TM6000_BOARD_UNKNOWN 0
-#define TM5600_BOARD_GENERIC 1
-#define TM6000_BOARD_GENERIC 2
-#define TM6010_BOARD_GENERIC 3
-#define TM5600_BOARD_10MOONS_UT821 4
-#define TM5600_BOARD_10MOONS_UT330 5
-#define TM6000_BOARD_ADSTECH_DUAL_TV 6
-#define TM6000_BOARD_FREECOM_AND_SIMILAR 7
-#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8
-#define TM6010_BOARD_HAUPPAUGE_900H 9
-#define TM6010_BOARD_BEHOLD_WANDER 10
-#define TM6010_BOARD_BEHOLD_VOYAGER 11
-#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
-#define TM6010_BOARD_TWINHAN_TU501 13
-#define TM6010_BOARD_BEHOLD_WANDER_LITE 14
-#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15
-#define TM5600_BOARD_TERRATEC_GRABSTER 16
-
-#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
- (model == TM5600_BOARD_GENERIC) || \
- (model == TM6000_BOARD_GENERIC) || \
- (model == TM6010_BOARD_GENERIC))
-
-#define TM6000_MAXBOARDS 16
-static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
-
-module_param_array(card, int, NULL, 0444);
-
-static unsigned long tm6000_devused;
-
-
-struct tm6000_board {
- char *name;
- char eename[16]; /* EEPROM name */
- unsigned eename_size; /* size of EEPROM name */
- unsigned eename_pos; /* Position where it appears at ROM */
-
- struct tm6000_capabilities caps;
-
- enum tm6000_devtype type; /* variant of the chipset */
- int tuner_type; /* type of the tuner */
- int tuner_addr; /* tuner address */
- int demod_addr; /* demodulator address */
-
- struct tm6000_gpio gpio;
-
- struct tm6000_input vinput[3];
- struct tm6000_input rinput;
-
- char *ir_codes;
-};
-
-struct tm6000_board tm6000_boards[] = {
- [TM6000_BOARD_UNKNOWN] = {
- .name = "Unknown tm6000 video grabber",
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM5600_BOARD_GENERIC] = {
- .name = "Generic tm5600 board",
- .type = TM5600,
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_GENERIC] = {
- .name = "Generic tm6000 board",
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_GENERIC] = {
- .name = "Generic tm6010 board",
- .type = TM6010,
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM5600_BOARD_10MOONS_UT821] = {
- .name = "10Moons UT 821",
- .tuner_type = TUNER_XC2028,
- .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
- .eename_size = 14,
- .eename_pos = 0x14,
- .type = TM5600,
- .tuner_addr = 0xc2 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_eeprom = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM5600_BOARD_10MOONS_UT330] = {
- .name = "10Moons UT 330",
- .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4,
- .tuner_addr = 0xc8 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 0,
- .has_zl10353 = 0,
- .has_eeprom = 1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_ADSTECH_DUAL_TV] = {
- .name = "ADSTECH Dual TV USB",
- .tuner_type = TUNER_XC2028,
- .tuner_addr = 0xc8 >> 1,
- .caps = {
- .has_tuner = 1,
- .has_tda9874 = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
- .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 0,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_4,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
- .name = "ADSTECH Mini Dual TV USB",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc8 >> 1,
- .demod_addr = 0x1e >> 1,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 0,
- },
- .gpio = {
- .tuner_reset = TM6000_GPIO_4,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_HAUPPAUGE_900H] = {
- .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
- .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
- .eename_size = 14,
- .eename_pos = 0x42,
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_BEHOLD_WANDER] = {
- .name = "Beholder Wander DVB-T/TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- .has_radio = 1.
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .demod_reset = TM6010_GPIO_1,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
- [TM6010_BOARD_BEHOLD_VOYAGER] = {
- .name = "Beholder Voyager TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 0,
- .has_zl10353 = 0,
- .has_eeprom = 1,
- .has_remote = 1,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
- [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
- .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM5600_BOARD_TERRATEC_GRABSTER] = {
- .name = "Terratec Grabster AV 150/250 MX",
- .type = TM5600,
- .tuner_type = TUNER_ABSENT,
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_ADC1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_TWINHAN_TU501] = {
- .name = "Twinhan TU501(704D1)",
- .tuner_type = TUNER_XC2028, /* has a XC3028 */
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_2,
- .tuner_on = TM6010_GPIO_3,
- .demod_reset = TM6010_GPIO_1,
- .demod_on = TM6010_GPIO_4,
- .power_led = TM6010_GPIO_7,
- .dvb_led = TM6010_GPIO_5,
- .ir = TM6010_GPIO_0,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- }, {
- .type = TM6000_INPUT_COMPOSITE1,
- .vmux = TM6000_VMUX_VIDEO_A,
- .amux = TM6000_AMUX_ADC2,
- }, {
- .type = TM6000_INPUT_SVIDEO,
- .vmux = TM6000_VMUX_VIDEO_AB,
- .amux = TM6000_AMUX_ADC2,
- },
- },
- },
- [TM6010_BOARD_BEHOLD_WANDER_LITE] = {
- .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .demod_addr = 0x1e >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 1,
- .has_zl10353 = 1,
- .has_eeprom = 1,
- .has_remote = 0,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .demod_reset = TM6010_GPIO_1,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
- [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
- .name = "Beholder Voyager Lite TV/FM USB2.0",
- .tuner_type = TUNER_XC5000,
- .tuner_addr = 0xc2 >> 1,
- .type = TM6010,
- .caps = {
- .has_tuner = 1,
- .has_dvb = 0,
- .has_zl10353 = 0,
- .has_eeprom = 1,
- .has_remote = 0,
- .has_radio = 1,
- },
- .gpio = {
- .tuner_reset = TM6010_GPIO_0,
- .power_led = TM6010_GPIO_6,
- },
- .vinput = { {
- .type = TM6000_INPUT_TV,
- .vmux = TM6000_VMUX_VIDEO_B,
- .amux = TM6000_AMUX_SIF1,
- },
- },
- .rinput = {
- .type = TM6000_INPUT_RADIO,
- .amux = TM6000_AMUX_ADC1,
- },
- },
-};
-
-/* table of devices that work with this driver */
-struct usb_device_id tm6000_id_table[] = {
- { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
- { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
- { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
- { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
- { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
- { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
- { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
- { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
- { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
- { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
- { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
- { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
- { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
- { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
- { },
-};
-
-/* Control power led for show some activity */
-void tm6000_flash_led(struct tm6000_core *dev, u8 state)
-{
- /* Power LED unconfigured */
- if (!dev->gpio.power_led)
- return;
-
- /* ON Power LED */
- if (state) {
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x00);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x01);
- break;
- }
- }
- /* OFF Power LED */
- else {
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x01);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x00);
- break;
- }
- }
-}
-
-/* Tuner callback to provide the proper gpio changes needed for xc5000 */
-int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
-{
- int rc = 0;
- struct tm6000_core *dev = ptr;
-
- if (dev->tuner_type != TUNER_XC5000)
- return 0;
-
- switch (command) {
- case XC5000_TUNER_RESET:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(15);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- msleep(15);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- break;
- }
- return rc;
-}
-EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
-
-/* Tuner callback to provide the proper gpio changes needed for xc2028 */
-
-int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
-{
- int rc = 0;
- struct tm6000_core *dev = ptr;
-
- if (dev->tuner_type != TUNER_XC2028)
- return 0;
-
- switch (command) {
- case XC2028_RESET_CLK:
- tm6000_ir_wait(dev, 0);
-
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
- 0x02, arg);
- msleep(10);
- rc = tm6000_i2c_reset(dev, 10);
- break;
- case XC2028_TUNER_RESET:
- /* Reset codes during load firmware */
- switch (arg) {
- case 0:
- /* newer tuner can faster reset */
- switch (dev->model) {
- case TM5600_BOARD_10MOONS_UT821:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- 0x300, 0x01);
- msleep(10);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- 0x300, 0x00);
- msleep(10);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- 0x300, 0x01);
- break;
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(60);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- msleep(75);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(60);
- break;
- default:
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- msleep(130);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- msleep(130);
- break;
- }
-
- tm6000_ir_wait(dev, 1);
- break;
- case 1:
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
- 0x02, 0x01);
- msleep(10);
- break;
- case 2:
- rc = tm6000_i2c_reset(dev, 100);
- break;
- }
- }
- return rc;
-}
-EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
-
-int tm6000_cards_setup(struct tm6000_core *dev)
-{
- int i, rc;
-
- /*
- * Board-specific initialization sequence. Handles all GPIO
- * initialization sequences that are board-specific.
- * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
- * Probably, they're all based on some reference device. Due to that,
- * there's a common routine at the end to handle those GPIO's. Devices
- * that use different pinups or init sequences can just return at
- * the board-specific session.
- */
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- case TM6010_BOARD_GENERIC:
- /* Turn xceive 3028 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
- msleep(15);
- /* Turn zarlink zl10353 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
- msleep(15);
- /* Reset zarlink zl10353 */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
- msleep(50);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
- msleep(15);
- /* Turn zarlink zl10353 off */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
- msleep(15);
- /* ir ? */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
- msleep(15);
- /* Power led on (blue) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
- msleep(15);
- /* DVB led off (orange) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
- msleep(15);
- /* Turn zarlink zl10353 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
- msleep(15);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- /* Power led on (blue) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
- msleep(15);
- /* Reset zarlink zl10353 */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
- msleep(50);
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
- msleep(15);
- break;
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- /* Power led on (blue) */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
- msleep(15);
- break;
- default:
- break;
- }
-
- /*
- * Default initialization. Most of the devices seem to use GPIO1
- * and GPIO4.on the same way, so, this handles the common sequence
- * used by most devices.
- * If a device uses a different sequence or different GPIO pins for
- * reset, just add the code at the board-specific part
- */
-
- if (dev->gpio.tuner_reset) {
- for (i = 0; i < 2; i++) {
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- if (rc < 0) {
- printk(KERN_ERR "Error %i doing tuner reset\n", rc);
- return rc;
- }
-
- msleep(10); /* Just to be conservative */
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- if (rc < 0) {
- printk(KERN_ERR "Error %i doing tuner reset\n", rc);
- return rc;
- }
- }
- } else {
- printk(KERN_ERR "Tuner reset is not configured\n");
- return -1;
- }
-
- msleep(50);
-
- return 0;
-};
-
-static void tm6000_config_tuner(struct tm6000_core *dev)
-{
- struct tuner_setup tun_setup;
-
- /* Load tuner module */
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tuner", dev->tuner_addr, NULL);
-
- memset(&tun_setup, 0, sizeof(tun_setup));
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = dev->tuner_addr;
-
- tun_setup.mode_mask = 0;
- if (dev->caps.has_tuner)
- tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
-
- switch (dev->tuner_type) {
- case TUNER_XC2028:
- tun_setup.tuner_callback = tm6000_tuner_callback;
- break;
- case TUNER_XC5000:
- tun_setup.tuner_callback = tm6000_xc5000_callback;
- break;
- }
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
-
- switch (dev->tuner_type) {
- case TUNER_XC2028: {
- struct v4l2_priv_tun_config xc2028_cfg;
- struct xc2028_ctrl ctl;
-
- memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
- memset(&ctl, 0, sizeof(ctl));
-
- ctl.demod = XC3028_FE_ZARLINK456;
-
- xc2028_cfg.tuner = TUNER_XC2028;
- xc2028_cfg.priv = &ctl;
-
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- ctl.fname = "xc3028L-v36.fw";
- break;
- default:
- if (dev->dev_type == TM6010)
- ctl.fname = "xc3028-v27.fw";
- else
- ctl.fname = "xc3028-v24.fw";
- }
-
- printk(KERN_INFO "Setting firmware parameters for xc2028\n");
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
- &xc2028_cfg);
-
- }
- break;
- case TUNER_XC5000:
- {
- struct v4l2_priv_tun_config xc5000_cfg;
- struct xc5000_config ctl = {
- .i2c_address = dev->tuner_addr,
- .if_khz = 4570,
- .radio_input = XC5000_RADIO_FM1_MONO,
- };
-
- xc5000_cfg.tuner = TUNER_XC5000;
- xc5000_cfg.priv = &ctl;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
- &xc5000_cfg);
- }
- break;
- default:
- printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
- break;
- }
-}
-
-static int fill_board_specific_data(struct tm6000_core *dev)
-{
- int rc;
-
- dev->dev_type = tm6000_boards[dev->model].type;
- dev->tuner_type = tm6000_boards[dev->model].tuner_type;
- dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
-
- dev->gpio = tm6000_boards[dev->model].gpio;
-
- dev->ir_codes = tm6000_boards[dev->model].ir_codes;
-
- dev->demod_addr = tm6000_boards[dev->model].demod_addr;
-
- dev->caps = tm6000_boards[dev->model].caps;
-
- dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
- dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
- dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
- dev->rinput = tm6000_boards[dev->model].rinput;
-
- /* initialize hardware */
- rc = tm6000_init(dev);
- if (rc < 0)
- return rc;
-
- return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
-}
-
-
-static void use_alternative_detection_method(struct tm6000_core *dev)
-{
- int i, model = -1;
-
- if (!dev->eedata_size)
- return;
-
- for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
- if (!tm6000_boards[i].eename_size)
- continue;
- if (dev->eedata_size < tm6000_boards[i].eename_pos +
- tm6000_boards[i].eename_size)
- continue;
-
- if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
- tm6000_boards[i].eename,
- tm6000_boards[i].eename_size)) {
- model = i;
- break;
- }
- }
- if (model < 0) {
- printk(KERN_INFO "Device has eeprom but is currently unknown\n");
- return;
- }
-
- dev->model = model;
-
- printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
- tm6000_boards[model].name, model);
-}
-
-static int tm6000_init_dev(struct tm6000_core *dev)
-{
- struct v4l2_frequency f;
- int rc = 0;
-
- mutex_init(&dev->lock);
- mutex_lock(&dev->lock);
-
- if (!is_generic(dev->model)) {
- rc = fill_board_specific_data(dev);
- if (rc < 0)
- goto err;
-
- /* register i2c bus */
- rc = tm6000_i2c_register(dev);
- if (rc < 0)
- goto err;
- } else {
- /* register i2c bus */
- rc = tm6000_i2c_register(dev);
- if (rc < 0)
- goto err;
-
- use_alternative_detection_method(dev);
-
- rc = fill_board_specific_data(dev);
- if (rc < 0)
- goto err;
- }
-
- /* Default values for STD and resolutions */
- dev->width = 720;
- dev->height = 480;
- dev->norm = V4L2_STD_PAL_M;
-
- /* Configure tuner */
- tm6000_config_tuner(dev);
-
- /* Set video standard */
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
-
- /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
- f.tuner = 0;
- f.type = V4L2_TUNER_ANALOG_TV;
- f.frequency = 3092; /* 193.25 MHz */
- dev->freq = f.frequency;
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
-
- if (dev->caps.has_tda9874)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "tvaudio", I2C_ADDR_TDA9874, NULL);
-
- /* register and initialize V4L2 */
- rc = tm6000_v4l2_register(dev);
- if (rc < 0)
- goto err;
-
- tm6000_add_into_devlist(dev);
- tm6000_init_extension(dev);
-
- tm6000_ir_init(dev);
-
- mutex_unlock(&dev->lock);
- return 0;
-
-err:
- mutex_unlock(&dev->lock);
- return rc;
-}
-
-/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
-#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-
-static void get_max_endpoint(struct usb_device *udev,
- struct usb_host_interface *alt,
- char *msgtype,
- struct usb_host_endpoint *curr_e,
- struct tm6000_endpoint *tm_ep)
-{
- u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
- unsigned int size = tmp & 0x7ff;
-
- if (udev->speed == USB_SPEED_HIGH)
- size = size * hb_mult(tmp);
-
- if (size > tm_ep->maxsize) {
- tm_ep->endp = curr_e;
- tm_ep->maxsize = size;
- tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
- tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
-
- printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
- msgtype, curr_e->desc.bEndpointAddress,
- size);
- }
-}
-
-/*
- * tm6000_usb_probe()
- * checks for supported devices
- */
-static int tm6000_usb_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- struct usb_device *usbdev;
- struct tm6000_core *dev = NULL;
- int i, rc = 0;
- int nr = 0;
- char *speed;
-
- usbdev = usb_get_dev(interface_to_usbdev(interface));
-
- /* Selects the proper interface */
- rc = usb_set_interface(usbdev, 0, 1);
- if (rc < 0)
- goto err;
-
- /* Check to see next free device and mark as used */
- nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
- if (nr >= TM6000_MAXBOARDS) {
- printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
- usb_put_dev(usbdev);
- return -ENOMEM;
- }
-
- /* Create and initialize dev struct */
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL) {
- printk(KERN_ERR "tm6000" ": out of memory!\n");
- usb_put_dev(usbdev);
- return -ENOMEM;
- }
- spin_lock_init(&dev->slock);
-
- /* Increment usage count */
- tm6000_devused |= 1<<nr;
- snprintf(dev->name, 29, "tm6000 #%d", nr);
-
- dev->model = id->driver_info;
- if ((card[nr] >= 0) && (card[nr] < ARRAY_SIZE(tm6000_boards)))
- dev->model = card[nr];
-
- dev->udev = usbdev;
- dev->devno = nr;
-
- switch (usbdev->speed) {
- case USB_SPEED_LOW:
- speed = "1.5";
- break;
- case USB_SPEED_UNKNOWN:
- case USB_SPEED_FULL:
- speed = "12";
- break;
- case USB_SPEED_HIGH:
- speed = "480";
- break;
- default:
- speed = "unknown";
- }
-
-
-
- /* Get endpoints */
- for (i = 0; i < interface->num_altsetting; i++) {
- int ep;
-
- for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
- struct usb_host_endpoint *e;
- int dir_out;
-
- e = &interface->altsetting[i].endpoint[ep];
-
- dir_out = ((e->desc.bEndpointAddress &
- USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-
- printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
- i,
- interface->altsetting[i].desc.bInterfaceNumber,
- interface->altsetting[i].desc.bInterfaceClass);
-
- switch (e->desc.bmAttributes) {
- case USB_ENDPOINT_XFER_BULK:
- if (!dir_out) {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "Bulk IN", e,
- &dev->bulk_in);
- } else {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "Bulk OUT", e,
- &dev->bulk_out);
- }
- break;
- case USB_ENDPOINT_XFER_ISOC:
- if (!dir_out) {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "ISOC IN", e,
- &dev->isoc_in);
- } else {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "ISOC OUT", e,
- &dev->isoc_out);
- }
- break;
- case USB_ENDPOINT_XFER_INT:
- if (!dir_out) {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "INT IN", e,
- &dev->int_in);
- } else {
- get_max_endpoint(usbdev,
- &interface->altsetting[i],
- "INT OUT", e,
- &dev->int_out);
- }
- break;
- }
- }
- }
-
-
- printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
- speed,
- le16_to_cpu(dev->udev->descriptor.idVendor),
- le16_to_cpu(dev->udev->descriptor.idProduct),
- interface->altsetting->desc.bInterfaceNumber);
-
-/* check if the the device has the iso in endpoint at the correct place */
- if (!dev->isoc_in.endp) {
- printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
- rc = -ENODEV;
-
- goto err;
- }
-
- /* save our data pointer in this interface device */
- usb_set_intfdata(interface, dev);
-
- printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
-
- rc = tm6000_init_dev(dev);
-
- if (rc < 0)
- goto err;
-
- return 0;
-
-err:
- printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
-
- tm6000_devused &= ~(1<<nr);
- usb_put_dev(usbdev);
-
- kfree(dev);
- return rc;
-}
-
-/*
- * tm6000_usb_disconnect()
- * called when the device gets diconencted
- * video device will be unregistered on v4l2_close in case it is still open
- */
-static void tm6000_usb_disconnect(struct usb_interface *interface)
-{
- struct tm6000_core *dev = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
-
- if (!dev)
- return;
-
- printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
-
- tm6000_ir_fini(dev);
-
- if (dev->gpio.power_led) {
- switch (dev->model) {
- case TM6010_BOARD_HAUPPAUGE_900H:
- case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
- case TM6010_BOARD_TWINHAN_TU501:
- /* Power led off */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x01);
- msleep(15);
- break;
- case TM6010_BOARD_BEHOLD_WANDER:
- case TM6010_BOARD_BEHOLD_VOYAGER:
- case TM6010_BOARD_BEHOLD_WANDER_LITE:
- case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
- /* Power led off */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.power_led, 0x00);
- msleep(15);
- break;
- }
- }
- tm6000_v4l2_unregister(dev);
-
- tm6000_i2c_unregister(dev);
-
- v4l2_device_unregister(&dev->v4l2_dev);
-
- dev->state |= DEV_DISCONNECTED;
-
- usb_put_dev(dev->udev);
-
- tm6000_close_extension(dev);
- tm6000_remove_from_devlist(dev);
-
- kfree(dev);
-}
-
-static struct usb_driver tm6000_usb_driver = {
- .name = "tm6000",
- .probe = tm6000_usb_probe,
- .disconnect = tm6000_usb_disconnect,
- .id_table = tm6000_id_table,
-};
-
-static int __init tm6000_module_init(void)
-{
- int result;
-
- printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
- (TM6000_VERSION >> 16) & 0xff,
- (TM6000_VERSION >> 8) & 0xff, TM6000_VERSION & 0xff);
-
- /* register this driver with the USB subsystem */
- result = usb_register(&tm6000_usb_driver);
- if (result)
- printk(KERN_ERR "tm6000"
- " usb_register failed. Error number %d.\n", result);
-
- return result;
-}
-
-static void __exit tm6000_module_exit(void)
-{
- /* deregister at USB subsystem */
- usb_deregister(&tm6000_usb_driver);
-}
-
-module_init(tm6000_module_init);
-module_exit(tm6000_module_exit);
-
-MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
-MODULE_AUTHOR("Mauro Carvalho Chehab");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c
deleted file mode 100644
index d7eb2e2..0000000
--- a/drivers/staging/tm6000/tm6000-core.c
+++ /dev/null
@@ -1,909 +0,0 @@
-/*
- * tm6000-core.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- * - DVB-T support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/i2c.h>
-#include "tm6000.h"
-#include "tm6000-regs.h"
-#include <media/v4l2-common.h>
-#include <media/tuner.h>
-
-#define USB_TIMEOUT (5 * HZ) /* ms */
-
-int tm6000_read_write_usb(struct tm6000_core *dev, u8 req_type, u8 req,
- u16 value, u16 index, u8 *buf, u16 len)
-{
- int ret, i;
- unsigned int pipe;
- u8 *data = NULL;
-
- if (len)
- data = kzalloc(len, GFP_KERNEL);
-
-
- if (req_type & USB_DIR_IN)
- pipe = usb_rcvctrlpipe(dev->udev, 0);
- else {
- pipe = usb_sndctrlpipe(dev->udev, 0);
- memcpy(data, buf, len);
- }
-
- if (tm6000_debug & V4L2_DEBUG_I2C) {
- printk("(dev %p, pipe %08x): ", dev->udev, pipe);
-
- printk("%s: %02x %02x %02x %02x %02x %02x %02x %02x ",
- (req_type & USB_DIR_IN) ? " IN" : "OUT",
- req_type, req, value&0xff, value>>8, index&0xff,
- index>>8, len&0xff, len>>8);
-
- if (!(req_type & USB_DIR_IN)) {
- printk(">>> ");
- for (i = 0; i < len; i++)
- printk(" %02x", buf[i]);
- printk("\n");
- }
- }
-
- ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index,
- data, len, USB_TIMEOUT);
-
- if (req_type & USB_DIR_IN)
- memcpy(buf, data, len);
-
- if (tm6000_debug & V4L2_DEBUG_I2C) {
- if (ret < 0) {
- if (req_type & USB_DIR_IN)
- printk("<<< (len=%d)\n", len);
-
- printk("%s: Error #%d\n", __FUNCTION__, ret);
- } else if (req_type & USB_DIR_IN) {
- printk("<<< ");
- for (i = 0; i < len; i++)
- printk(" %02x", buf[i]);
- printk("\n");
- }
- }
-
- kfree(data);
-
- msleep(5);
-
- return ret;
-}
-
-int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- return
- tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
- req, value, index, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(tm6000_set_reg);
-
-int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- int rc;
- u8 buf[1];
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, index, buf, 1);
-
- if (rc < 0)
- return rc;
-
- return *buf;
-}
-EXPORT_SYMBOL_GPL(tm6000_get_reg);
-
-int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
- u16 index, u16 mask)
-{
- int rc;
- u8 buf[1];
- u8 new_index;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, index, buf, 1);
-
- if (rc < 0)
- return rc;
-
- new_index = (buf[0] & ~mask) | (index & mask);
-
- if (new_index == index)
- return 0;
-
- return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
- req, value, new_index, NULL, 0);
-}
-EXPORT_SYMBOL_GPL(tm6000_set_reg_mask);
-
-int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- int rc;
- u8 buf[2];
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, index, buf, 2);
-
- if (rc < 0)
- return rc;
-
- return buf[1]|buf[0]<<8;
-}
-
-int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index)
-{
- int rc;
- u8 buf[4];
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
- value, index, buf, 4);
-
- if (rc < 0)
- return rc;
-
- return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24;
-}
-
-int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep)
-{
- int rc;
-
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
- if (rc < 0)
- return rc;
-
- msleep(tsleep);
-
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
- msleep(tsleep);
-
- return rc;
-}
-
-void tm6000_set_fourcc_format(struct tm6000_core *dev)
-{
- if (dev->dev_type == TM6010) {
- int val;
-
- val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0) & 0xfc;
- if (dev->fourcc == V4L2_PIX_FMT_UYVY)
- tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val);
- else
- tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val | 1);
- } else {
- if (dev->fourcc == V4L2_PIX_FMT_UYVY)
- tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
- else
- tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0x90);
- }
-}
-
-static void tm6000_set_vbi(struct tm6000_core *dev)
-{
- /*
- * FIXME:
- * VBI lines and start/end are different between 60Hz and 50Hz
- * So, it is very likely that we need to change the config to
- * something that takes it into account, doing something different
- * if (dev->norm & V4L2_STD_525_60)
- */
-
- if (dev->dev_type == TM6010) {
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
- tm6000_set_reg(dev, TM6010_REQ07_R41_TELETEXT_VBI_CODE1, 0x27);
- tm6000_set_reg(dev, TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55);
- tm6000_set_reg(dev, TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7, 0x66);
- tm6000_set_reg(dev, TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8, 0x66);
- tm6000_set_reg(dev, TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22, 0x66);
- tm6000_set_reg(dev,
- TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23, 0x00);
- tm6000_set_reg(dev,
- TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES, 0x00);
- tm6000_set_reg(dev,
- TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01);
- tm6000_set_reg(dev,
- TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN, 0x00);
- tm6000_set_reg(dev,
- TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02);
- tm6000_set_reg(dev, TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35);
- tm6000_set_reg(dev, TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0);
- tm6000_set_reg(dev, TM6010_REQ07_R5A_VBI_TELETEXT_DTO1, 0x11);
- tm6000_set_reg(dev, TM6010_REQ07_R5B_VBI_TELETEXT_DTO0, 0x4c);
- tm6000_set_reg(dev, TM6010_REQ07_R40_TELETEXT_VBI_CODE0, 0x01);
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
- }
-}
-
-int tm6000_init_analog_mode(struct tm6000_core *dev)
-{
- struct v4l2_frequency f;
-
- if (dev->dev_type == TM6010) {
- /* Enable video and audio */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF,
- 0x60, 0x60);
- /* Disable TS input */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
- 0x00, 0x40);
- } else {
- /* Enables soft reset */
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
-
- if (dev->scaler)
- /* Disable Hfilter and Enable TS Drop err */
- tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x20);
- else /* Enable Hfilter and disable TS Drop err */
- tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x80);
-
- tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x88);
- tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x23);
- tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xc0);
- tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xd8);
- tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x06);
- tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f);
-
- /* AP Software reset */
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
-
- tm6000_set_fourcc_format(dev);
-
- /* Disables soft reset */
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
- }
- msleep(20);
-
- /* Tuner firmware can now be loaded */
-
- /*
- * FIXME: This is a hack! xc3028 "sleeps" when no channel is detected
- * for more than a few seconds. Not sure why, as this behavior does
- * not happen on other devices with xc3028. So, I suspect that it
- * is yet another bug at tm6000. After start sleeping, decoding
- * doesn't start automatically. Instead, it requires some
- * I2C commands to wake it up. As we want to have image at the
- * beginning, we needed to add this hack. The better would be to
- * discover some way to make tm6000 to wake up without this hack.
- */
- f.frequency = dev->freq;
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
-
- msleep(100);
- tm6000_set_standard(dev);
- tm6000_set_vbi(dev);
- tm6000_set_audio_bitrate(dev, 48000);
-
- /* switch dvb led off */
- if (dev->gpio.dvb_led) {
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.dvb_led, 0x01);
- }
-
- return 0;
-}
-
-int tm6000_init_digital_mode(struct tm6000_core *dev)
-{
- if (dev->dev_type == TM6010) {
- /* Disable video and audio */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF,
- 0x00, 0x60);
- /* Enable TS input */
- tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
- 0x40, 0x40);
- /* all power down, but not the digital data port */
- tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0x28);
- tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc);
- tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff);
- } else {
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
- tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
- tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
- tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x08);
- tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
- tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0xd8);
- tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x40);
- tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
- tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x09);
- tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x37);
- tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xd8);
- tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xc0);
- tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x60);
-
- tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
- tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0x08);
- msleep(50);
-
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
- msleep(50);
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01);
- msleep(50);
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
- msleep(100);
- }
-
- /* switch dvb led on */
- if (dev->gpio.dvb_led) {
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.dvb_led, 0x00);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(tm6000_init_digital_mode);
-
-struct reg_init {
- u8 req;
- u8 reg;
- u8 val;
-};
-
-/* The meaning of those initializations are unknown */
-struct reg_init tm6000_init_tab[] = {
- /* REG VALUE */
- { TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f },
- { TM6010_REQ07_RFF_SOFT_RESET, 0x08 },
- { TM6010_REQ07_RFF_SOFT_RESET, 0x00 },
- { TM6010_REQ07_RD5_POWERSAVE, 0x4f },
- { TM6000_REQ07_RDA_CLK_SEL, 0x23 },
- { TM6000_REQ07_RDB_OUT_SEL, 0x08 },
- { TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x00 },
- { TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10 },
- { TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00 },
- { TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00 },
- { TM6000_REQ07_REB_VADC_AADC_MODE, 0x64 }, /* 48000 bits/sample, external input */
- { TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL, 0xc2 },
-
- { TM6010_REQ07_R3F_RESET, 0x01 }, /* Start of soft reset */
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
- { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
- { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
- { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
- { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
- { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
- { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
- { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
- { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
- { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
- { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
- { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
- { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
- { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
- { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
- { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
- { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
- { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
- { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
- { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
- { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
- { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
- { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
- { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
- { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
- { TM6010_REQ07_RC3_HSTART1, 0x88 },
- { TM6010_REQ07_R3F_RESET, 0x00 }, /* End of the soft reset */
- { TM6010_REQ05_R18_IMASK7, 0x00 },
-};
-
-struct reg_init tm6010_init_tab[] = {
- { TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x00 },
- { TM6010_REQ07_RC4_HSTART0, 0xa0 },
- { TM6010_REQ07_RC6_HEND0, 0x40 },
- { TM6010_REQ07_RCA_VEND0, 0x31 },
- { TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0xe1 },
- { TM6010_REQ07_RE0_DVIDEO_SOURCE, 0x03 },
- { TM6010_REQ07_RFE_POWER_DOWN, 0x7f },
-
- { TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xf0 },
- { TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4 },
- { TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8 },
- { TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0x00 },
- { TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2 },
- { TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0 },
- { TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2 },
- { TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, 0x60 },
- { TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc },
-
- { TM6010_REQ07_R3F_RESET, 0x01 },
- { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
- { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
- { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
- { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
- { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
- { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
- { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
- { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
- { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
- { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
- { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
- { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
- { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
- { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
- { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
- { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
- { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
- { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
- { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
- { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
- { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
- { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
- { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
- { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
- { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
- { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
- { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
- { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
- { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
- { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
- { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
- { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
- { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
- { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
- { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
- { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
- { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
- { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
- { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
- { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
- { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
- { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
- { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
- { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
- { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
- { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
- { TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
- { TM6010_REQ07_RC3_HSTART1, 0x88 },
- { TM6010_REQ07_R3F_RESET, 0x00 },
-
- { TM6010_REQ05_R18_IMASK7, 0x00 },
-
- { TM6010_REQ07_RD8_IR_LEADER1, 0xaa },
- { TM6010_REQ07_RD8_IR_LEADER0, 0x30 },
- { TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20 },
- { TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0 },
- { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
- { TM6010_REQ07_RD8_IR, 0x2f },
-
- /* set remote wakeup key:any key wakeup */
- { TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe },
- { TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff },
-};
-
-int tm6000_init(struct tm6000_core *dev)
-{
- int board, rc = 0, i, size;
- struct reg_init *tab;
-
- /* Check board revision */
- board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
- if (board >= 0) {
- switch (board & 0xff) {
- case 0xf3:
- printk(KERN_INFO "Found tm6000\n");
- if (dev->dev_type != TM6000)
- dev->dev_type = TM6000;
- break;
- case 0xf4:
- printk(KERN_INFO "Found tm6010\n");
- if (dev->dev_type != TM6010)
- dev->dev_type = TM6010;
- break;
- default:
- printk(KERN_INFO "Unknown board version = 0x%08x\n", board);
- }
- } else
- printk(KERN_ERR "Error %i while retrieving board version\n", board);
-
- if (dev->dev_type == TM6010) {
- tab = tm6010_init_tab;
- size = ARRAY_SIZE(tm6010_init_tab);
- } else {
- tab = tm6000_init_tab;
- size = ARRAY_SIZE(tm6000_init_tab);
- }
-
- /* Load board's initialization table */
- for (i = 0; i < size; i++) {
- rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val);
- if (rc < 0) {
- printk(KERN_ERR "Error %i while setting req %d, "
- "reg %d to value %d\n", rc,
- tab[i].req, tab[i].reg, tab[i].val);
- return rc;
- }
- }
-
- msleep(5); /* Just to be conservative */
-
- rc = tm6000_cards_setup(dev);
-
- return rc;
-}
-
-int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
-{
- int val = 0;
- u8 areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
- u8 areg_0a = 0x91; /* SIF 48KHz */
-
- switch (bitrate) {
- case 48000:
- areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
- areg_0a = 0x91; /* SIF 48KHz */
- dev->audio_bitrate = bitrate;
- break;
- case 32000:
- areg_f0 = 0x00; /* ADC MCLK = 375 Fs */
- areg_0a = 0x90; /* SIF 32KHz */
- dev->audio_bitrate = bitrate;
- break;
- default:
- return -EINVAL;
- }
-
-
- /* enable I2S, if we use sif or external I2S device */
- if (dev->dev_type == TM6010) {
- val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, areg_0a);
- if (val < 0)
- return val;
-
- val = tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- areg_f0, 0xf0);
- if (val < 0)
- return val;
- } else {
- val = tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
- areg_f0, 0xf0);
- if (val < 0)
- return val;
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
-
-int tm6000_set_audio_rinput(struct tm6000_core *dev)
-{
- if (dev->dev_type == TM6010) {
- /* Audio crossbar setting, default SIF1 */
- u8 areg_f0;
-
- switch (dev->rinput.amux) {
- case TM6000_AMUX_SIF1:
- case TM6000_AMUX_SIF2:
- areg_f0 = 0x03;
- break;
- case TM6000_AMUX_ADC1:
- areg_f0 = 0x00;
- break;
- case TM6000_AMUX_ADC2:
- areg_f0 = 0x08;
- break;
- case TM6000_AMUX_I2S:
- areg_f0 = 0x04;
- break;
- default:
- printk(KERN_INFO "%s: audio input dosn't support\n",
- dev->name);
- return 0;
- break;
- }
- /* Set audio input crossbar */
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- areg_f0, 0x0f);
- } else {
- u8 areg_eb;
- /* Audio setting, default LINE1 */
- switch (dev->rinput.amux) {
- case TM6000_AMUX_ADC1:
- areg_eb = 0x00;
- break;
- case TM6000_AMUX_ADC2:
- areg_eb = 0x04;
- break;
- default:
- printk(KERN_INFO "%s: audio input dosn't support\n",
- dev->name);
- return 0;
- break;
- }
- /* Set audio input */
- tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
- areg_eb, 0x0f);
- }
- return 0;
-}
-
-void tm6010_set_mute_sif(struct tm6000_core *dev, u8 mute)
-{
- u8 mute_reg = 0;
-
- if (mute)
- mute_reg = 0x08;
-
- tm6000_set_reg_mask(dev, TM6010_REQ08_R0A_A_I2S_MOD, mute_reg, 0x08);
-}
-
-void tm6010_set_mute_adc(struct tm6000_core *dev, u8 mute)
-{
- u8 mute_reg = 0;
-
- if (mute)
- mute_reg = 0x20;
-
- if (dev->dev_type == TM6010) {
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL,
- mute_reg, 0x20);
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL,
- mute_reg, 0x20);
- } else {
- tm6000_set_reg_mask(dev, TM6000_REQ07_REC_VADC_AADC_LVOL,
- mute_reg, 0x20);
- tm6000_set_reg_mask(dev, TM6000_REQ07_RED_VADC_AADC_RVOL,
- mute_reg, 0x20);
- }
-}
-
-int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute)
-{
- enum tm6000_mux mux;
-
- if (dev->radio)
- mux = dev->rinput.amux;
- else
- mux = dev->vinput[dev->input].amux;
-
- switch (mux) {
- case TM6000_AMUX_SIF1:
- case TM6000_AMUX_SIF2:
- if (dev->dev_type == TM6010)
- tm6010_set_mute_sif(dev, mute);
- else {
- printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
- " SIF audio inputs. Please check the %s"
- " configuration.\n", dev->name);
- return -EINVAL;
- }
- break;
- case TM6000_AMUX_ADC1:
- case TM6000_AMUX_ADC2:
- tm6010_set_mute_adc(dev, mute);
- break;
- default:
- return -EINVAL;
- break;
- }
- return 0;
-}
-
-void tm6010_set_volume_sif(struct tm6000_core *dev, int vol)
-{
- u8 vol_reg;
-
- vol_reg = vol & 0x0F;
-
- if (vol < 0)
- vol_reg |= 0x40;
-
- tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, vol_reg);
- tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, vol_reg);
-}
-
-void tm6010_set_volume_adc(struct tm6000_core *dev, int vol)
-{
- u8 vol_reg;
-
- vol_reg = (vol + 0x10) & 0x1f;
-
- if (dev->dev_type == TM6010) {
- tm6000_set_reg(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, vol_reg);
- tm6000_set_reg(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, vol_reg);
- } else {
- tm6000_set_reg(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, vol_reg);
- tm6000_set_reg(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, vol_reg);
- }
-}
-
-void tm6000_set_volume(struct tm6000_core *dev, int vol)
-{
- enum tm6000_mux mux;
-
- if (dev->radio) {
- mux = dev->rinput.amux;
- vol += 8; /* Offset to 0 dB */
- } else
- mux = dev->vinput[dev->input].amux;
-
- switch (mux) {
- case TM6000_AMUX_SIF1:
- case TM6000_AMUX_SIF2:
- if (dev->dev_type == TM6010)
- tm6010_set_volume_sif(dev, vol);
- else
- printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
- " SIF audio inputs. Please check the %s"
- " configuration.\n", dev->name);
- break;
- case TM6000_AMUX_ADC1:
- case TM6000_AMUX_ADC2:
- tm6010_set_volume_adc(dev, vol);
- break;
- default:
- break;
- }
-}
-
-static LIST_HEAD(tm6000_devlist);
-static DEFINE_MUTEX(tm6000_devlist_mutex);
-
-/*
- * tm6000_realease_resource()
- */
-
-void tm6000_remove_from_devlist(struct tm6000_core *dev)
-{
- mutex_lock(&tm6000_devlist_mutex);
- list_del(&dev->devlist);
- mutex_unlock(&tm6000_devlist_mutex);
-};
-
-void tm6000_add_into_devlist(struct tm6000_core *dev)
-{
- mutex_lock(&tm6000_devlist_mutex);
- list_add_tail(&dev->devlist, &tm6000_devlist);
- mutex_unlock(&tm6000_devlist_mutex);
-};
-
-/*
- * Extension interface
- */
-
-static LIST_HEAD(tm6000_extension_devlist);
-
-int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
- char *buf, int size)
-{
- struct tm6000_ops *ops = NULL;
-
- /* FIXME: tm6000_extension_devlist_lock should be a spinlock */
-
- if (!list_empty(&tm6000_extension_devlist)) {
- list_for_each_entry(ops, &tm6000_extension_devlist, next) {
- if (ops->fillbuf && ops->type == type)
- ops->fillbuf(dev, buf, size);
- }
- }
-
- return 0;
-}
-
-int tm6000_register_extension(struct tm6000_ops *ops)
-{
- struct tm6000_core *dev = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- list_add_tail(&ops->next, &tm6000_extension_devlist);
- list_for_each_entry(dev, &tm6000_devlist, devlist) {
- ops->init(dev);
- printk(KERN_INFO "%s: Initialized (%s) extension\n",
- dev->name, ops->name);
- }
- mutex_unlock(&tm6000_devlist_mutex);
- return 0;
-}
-EXPORT_SYMBOL(tm6000_register_extension);
-
-void tm6000_unregister_extension(struct tm6000_ops *ops)
-{
- struct tm6000_core *dev = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- list_for_each_entry(dev, &tm6000_devlist, devlist)
- ops->fini(dev);
-
- printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name);
- list_del(&ops->next);
- mutex_unlock(&tm6000_devlist_mutex);
-}
-EXPORT_SYMBOL(tm6000_unregister_extension);
-
-void tm6000_init_extension(struct tm6000_core *dev)
-{
- struct tm6000_ops *ops = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- if (!list_empty(&tm6000_extension_devlist)) {
- list_for_each_entry(ops, &tm6000_extension_devlist, next) {
- if (ops->init)
- ops->init(dev);
- }
- }
- mutex_unlock(&tm6000_devlist_mutex);
-}
-
-void tm6000_close_extension(struct tm6000_core *dev)
-{
- struct tm6000_ops *ops = NULL;
-
- mutex_lock(&tm6000_devlist_mutex);
- if (!list_empty(&tm6000_extension_devlist)) {
- list_for_each_entry(ops, &tm6000_extension_devlist, next) {
- if (ops->fini)
- ops->fini(dev);
- }
- }
- mutex_unlock(&tm6000_devlist_mutex);
-}
diff --git a/drivers/staging/tm6000/tm6000-dvb.c b/drivers/staging/tm6000/tm6000-dvb.c
deleted file mode 100644
index 0e0dfce..0000000
--- a/drivers/staging/tm6000/tm6000-dvb.c
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * tm6000-dvb.c - dvb-t support for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-#include "zl10353.h"
-
-#include <media/tuner.h>
-
-#include "tuner-xc2028.h"
-#include "xc5000.h"
-
-MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
-
-MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},"
- "{{Trident, tm6000},"
- "{{Trident, tm6010}");
-
-static int debug;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug message");
-
-static inline void print_err_status(struct tm6000_core *dev,
- int packet, int status)
-{
- char *errmsg = "Unknown";
-
- switch (status) {
- case -ENOENT:
- errmsg = "unlinked synchronuously";
- break;
- case -ECONNRESET:
- errmsg = "unlinked asynchronuously";
- break;
- case -ENOSR:
- errmsg = "Buffer error (overrun)";
- break;
- case -EPIPE:
- errmsg = "Stalled (device not responding)";
- break;
- case -EOVERFLOW:
- errmsg = "Babble (bad cable?)";
- break;
- case -EPROTO:
- errmsg = "Bit-stuff error (bad cable?)";
- break;
- case -EILSEQ:
- errmsg = "CRC/Timeout (could be anything)";
- break;
- case -ETIME:
- errmsg = "Device does not respond";
- break;
- }
- if (packet < 0) {
- dprintk(dev, 1, "URB status %d [%s].\n",
- status, errmsg);
- } else {
- dprintk(dev, 1, "URB packet %d, status %d [%s].\n",
- packet, status, errmsg);
- }
-}
-
-static void tm6000_urb_received(struct urb *urb)
-{
- int ret;
- struct tm6000_core *dev = urb->context;
-
- if (urb->status != 0)
- print_err_status(dev, 0, urb->status);
- else if (urb->actual_length > 0)
- dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer,
- urb->actual_length);
-
- if (dev->dvb->streams > 0) {
- ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: error %s\n", __func__);
- kfree(urb->transfer_buffer);
- usb_free_urb(urb);
- }
- }
-}
-
-int tm6000_start_stream(struct tm6000_core *dev)
-{
- int ret;
- unsigned int pipe, size;
- struct tm6000_dvb *dvb = dev->dvb;
-
- printk(KERN_INFO "tm6000: got start stream request %s\n", __func__);
-
- if (dev->mode != TM6000_MODE_DIGITAL) {
- tm6000_init_digital_mode(dev);
- dev->mode = TM6000_MODE_DIGITAL;
- }
-
- dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (dvb->bulk_urb == NULL) {
- printk(KERN_ERR "tm6000: couldn't allocate urb\n");
- return -ENOMEM;
- }
-
- pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
-
- size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
- size = size * 15; /* 512 x 8 or 12 or 15 */
-
- dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
- if (dvb->bulk_urb->transfer_buffer == NULL) {
- usb_free_urb(dvb->bulk_urb);
- printk(KERN_ERR "tm6000: couldn't allocate transfer buffer!\n");
- return -ENOMEM;
- }
-
- usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe,
- dvb->bulk_urb->transfer_buffer,
- size,
- tm6000_urb_received, dev);
-
- ret = usb_clear_halt(dev->udev, pipe);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n",
- ret, __func__);
- return ret;
- } else
- printk(KERN_ERR "tm6000: pipe resetted\n");
-
-/* mutex_lock(&tm6000_driver.open_close_mutex); */
- ret = usb_submit_urb(dvb->bulk_urb, GFP_KERNEL);
-
-/* mutex_unlock(&tm6000_driver.open_close_mutex); */
- if (ret) {
- printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n",
- ret);
-
- kfree(dvb->bulk_urb->transfer_buffer);
- usb_free_urb(dvb->bulk_urb);
- return ret;
- }
-
- return 0;
-}
-
-void tm6000_stop_stream(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb = dev->dvb;
-
- if (dvb->bulk_urb) {
- printk(KERN_INFO "urb killing\n");
- usb_kill_urb(dvb->bulk_urb);
- printk(KERN_INFO "urb buffer free\n");
- kfree(dvb->bulk_urb->transfer_buffer);
- usb_free_urb(dvb->bulk_urb);
- dvb->bulk_urb = NULL;
- }
-}
-
-int tm6000_start_feed(struct dvb_demux_feed *feed)
-{
- struct dvb_demux *demux = feed->demux;
- struct tm6000_core *dev = demux->priv;
- struct tm6000_dvb *dvb = dev->dvb;
- printk(KERN_INFO "tm6000: got start feed request %s\n", __func__);
-
- mutex_lock(&dvb->mutex);
- if (dvb->streams == 0) {
- dvb->streams = 1;
-/* mutex_init(&tm6000_dev->streming_mutex); */
- tm6000_start_stream(dev);
- } else
- ++(dvb->streams);
- mutex_unlock(&dvb->mutex);
-
- return 0;
-}
-
-int tm6000_stop_feed(struct dvb_demux_feed *feed)
-{
- struct dvb_demux *demux = feed->demux;
- struct tm6000_core *dev = demux->priv;
- struct tm6000_dvb *dvb = dev->dvb;
-
- printk(KERN_INFO "tm6000: got stop feed request %s\n", __func__);
-
- mutex_lock(&dvb->mutex);
-
- printk(KERN_INFO "stream %#x\n", dvb->streams);
- --(dvb->streams);
- if (dvb->streams == 0) {
- printk(KERN_INFO "stop stream\n");
- tm6000_stop_stream(dev);
-/* mutex_destroy(&tm6000_dev->streaming_mutex); */
- }
- mutex_unlock(&dvb->mutex);
-/* mutex_destroy(&tm6000_dev->streaming_mutex); */
-
- return 0;
-}
-
-int tm6000_dvb_attach_frontend(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb = dev->dvb;
-
- if (dev->caps.has_zl10353) {
- struct zl10353_config config = {
- .demod_address = dev->demod_addr,
- .no_tuner = 1,
- .parallel_ts = 1,
- .if2 = 45700,
- .disable_i2c_gate_ctrl = 1,
- };
-
- dvb->frontend = dvb_attach(zl10353_attach, &config,
- &dev->i2c_adap);
- } else {
- printk(KERN_ERR "tm6000: no frontend defined for the device!\n");
- return -1;
- }
-
- return (!dvb->frontend) ? -1 : 0;
-}
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-int register_dvb(struct tm6000_core *dev)
-{
- int ret = -1;
- struct tm6000_dvb *dvb = dev->dvb;
-
- mutex_init(&dvb->mutex);
-
- dvb->streams = 0;
-
- /* attach the frontend */
- ret = tm6000_dvb_attach_frontend(dev);
- if (ret < 0) {
- printk(KERN_ERR "tm6000: couldn't attach the frontend!\n");
- goto err;
- }
-
- ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T",
- THIS_MODULE, &dev->udev->dev, adapter_nr);
- dvb->adapter.priv = dev;
-
- if (dvb->frontend) {
- switch (dev->tuner_type) {
- case TUNER_XC2028: {
- struct xc2028_config cfg = {
- .i2c_adap = &dev->i2c_adap,
- .i2c_addr = dev->tuner_addr,
- };
-
- dvb->frontend->callback = tm6000_tuner_callback;
- ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
- if (ret < 0) {
- printk(KERN_ERR
- "tm6000: couldn't register frontend\n");
- goto adapter_err;
- }
-
- if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
- printk(KERN_ERR "tm6000: couldn't register "
- "frontend (xc3028)\n");
- ret = -EINVAL;
- goto frontend_err;
- }
- printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
- "attached to frontend!\n");
- break;
- }
- case TUNER_XC5000: {
- struct xc5000_config cfg = {
- .i2c_address = dev->tuner_addr,
- };
-
- dvb->frontend->callback = tm6000_xc5000_callback;
- ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
- if (ret < 0) {
- printk(KERN_ERR
- "tm6000: couldn't register frontend\n");
- goto adapter_err;
- }
-
- if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
- printk(KERN_ERR "tm6000: couldn't register "
- "frontend (xc5000)\n");
- ret = -EINVAL;
- goto frontend_err;
- }
- printk(KERN_INFO "tm6000: XC5000 asked to be "
- "attached to frontend!\n");
- break;
- }
- }
- } else
- printk(KERN_ERR "tm6000: no frontend found\n");
-
- dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING
- | DMX_MEMORY_BASED_FILTERING;
- dvb->demux.priv = dev;
- dvb->demux.filternum = 8;
- dvb->demux.feednum = 8;
- dvb->demux.start_feed = tm6000_start_feed;
- dvb->demux.stop_feed = tm6000_stop_feed;
- dvb->demux.write_to_decoder = NULL;
- ret = dvb_dmx_init(&dvb->demux);
- if (ret < 0) {
- printk("tm6000: dvb_dmx_init failed (errno = %d)\n", ret);
- goto frontend_err;
- }
-
- dvb->dmxdev.filternum = dev->dvb->demux.filternum;
- dvb->dmxdev.demux = &dev->dvb->demux.dmx;
- dvb->dmxdev.capabilities = 0;
-
- ret = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
- if (ret < 0) {
- printk("tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret);
- goto dvb_dmx_err;
- }
-
- return 0;
-
-dvb_dmx_err:
- dvb_dmx_release(&dvb->demux);
-frontend_err:
- if (dvb->frontend) {
- dvb_frontend_detach(dvb->frontend);
- dvb_unregister_frontend(dvb->frontend);
- }
-adapter_err:
- dvb_unregister_adapter(&dvb->adapter);
-err:
- return ret;
-}
-
-void unregister_dvb(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb = dev->dvb;
-
- if (dvb->bulk_urb != NULL) {
- struct urb *bulk_urb = dvb->bulk_urb;
-
- kfree(bulk_urb->transfer_buffer);
- bulk_urb->transfer_buffer = NULL;
- usb_unlink_urb(bulk_urb);
- usb_free_urb(bulk_urb);
- }
-
-/* mutex_lock(&tm6000_driver.open_close_mutex); */
- if (dvb->frontend) {
- dvb_frontend_detach(dvb->frontend);
- dvb_unregister_frontend(dvb->frontend);
- }
-
- dvb_dmxdev_release(&dvb->dmxdev);
- dvb_dmx_release(&dvb->demux);
- dvb_unregister_adapter(&dvb->adapter);
- mutex_destroy(&dvb->mutex);
-/* mutex_unlock(&tm6000_driver.open_close_mutex); */
-}
-
-static int dvb_init(struct tm6000_core *dev)
-{
- struct tm6000_dvb *dvb;
- int rc;
-
- if (!dev)
- return 0;
-
- if (!dev->caps.has_dvb)
- return 0;
-
- dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL);
- if (!dvb) {
- printk(KERN_INFO "Cannot allocate memory\n");
- return -ENOMEM;
- }
-
- dev->dvb = dvb;
-
- rc = register_dvb(dev);
- if (rc < 0) {
- kfree(dvb);
- dev->dvb = NULL;
- return 0;
- }
-
- return 0;
-}
-
-static int dvb_fini(struct tm6000_core *dev)
-{
- if (!dev)
- return 0;
-
- if (!dev->caps.has_dvb)
- return 0;
-
- if (dev->dvb) {
- unregister_dvb(dev);
- kfree(dev->dvb);
- dev->dvb = NULL;
- }
-
- return 0;
-}
-
-static struct tm6000_ops dvb_ops = {
- .type = TM6000_DVB,
- .name = "TM6000 dvb Extension",
- .init = dvb_init,
- .fini = dvb_fini,
-};
-
-static int __init tm6000_dvb_register(void)
-{
- return tm6000_register_extension(&dvb_ops);
-}
-
-static void __exit tm6000_dvb_unregister(void)
-{
- tm6000_unregister_extension(&dvb_ops);
-}
-
-module_init(tm6000_dvb_register);
-module_exit(tm6000_dvb_unregister);
diff --git a/drivers/staging/tm6000/tm6000-i2c.c b/drivers/staging/tm6000/tm6000-i2c.c
deleted file mode 100644
index 5a651ea..0000000
--- a/drivers/staging/tm6000/tm6000-i2c.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * tm6000-i2c.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- * - Fix SMBus Read Byte command
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-#include <linux/i2c.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-#include <media/v4l2-common.h>
-#include <media/tuner.h>
-#include "tuner-xc2028.h"
-
-
-/* ----------------------------------------------------------- */
-
-static unsigned int i2c_debug;
-module_param(i2c_debug, int, 0644);
-MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
-
-#define i2c_dprintk(lvl, fmt, args...) if (i2c_debug >= lvl) do { \
- printk(KERN_DEBUG "%s at %s: " fmt, \
- dev->name, __func__, ##args); } while (0)
-
-static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr,
- __u8 reg, char *buf, int len)
-{
- int rc;
- unsigned int tsleep;
- unsigned int i2c_packet_limit = 16;
-
- if (dev->dev_type == TM6010)
- i2c_packet_limit = 64;
-
- if (!buf)
- return -1;
-
- if (len < 1 || len > i2c_packet_limit) {
- printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
- len, i2c_packet_limit);
- return -1;
- }
-
- /* capture mutex */
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
- addr | reg << 8, 0, buf, len);
-
- if (rc < 0) {
- /* release mutex */
- return rc;
- }
-
- /* Calculate delay time, 14000us for 64 bytes */
- tsleep = ((len * 200) + 200 + 1000) / 1000;
- msleep(tsleep);
-
- /* release mutex */
- return rc;
-}
-
-/* Generic read - doesn't work fine with 16bit registers */
-static int tm6000_i2c_recv_regs(struct tm6000_core *dev, unsigned char addr,
- __u8 reg, char *buf, int len)
-{
- int rc;
- u8 b[2];
- unsigned int i2c_packet_limit = 16;
-
- if (dev->dev_type == TM6010)
- i2c_packet_limit = 64;
-
- if (!buf)
- return -1;
-
- if (len < 1 || len > i2c_packet_limit) {
- printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
- len, i2c_packet_limit);
- return -1;
- }
-
- /* capture mutex */
- if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg % 2 == 0)) {
- /*
- * Workaround an I2C bug when reading from zl10353
- */
- reg -= 1;
- len += 1;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len);
-
- *buf = b[1];
- } else {
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
- }
-
- /* release mutex */
- return rc;
-}
-
-/*
- * read from a 16bit register
- * for example xc2028, xc3028 or xc3028L
- */
-static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char addr,
- __u16 reg, char *buf, int len)
-{
- int rc;
- unsigned char ureg;
-
- if (!buf || len != 2)
- return -1;
-
- /* capture mutex */
- if (dev->dev_type == TM6010) {
- ureg = reg & 0xFF;
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
- addr | (reg & 0xFF00), 0, &ureg, 1);
-
- if (rc < 0) {
- /* release mutex */
- return rc;
- }
-
- msleep(1400 / 1000);
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ,
- reg, 0, buf, len);
- } else {
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN,
- addr, reg, buf, len);
- }
-
- /* release mutex */
- return rc;
-}
-
-static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg msgs[], int num)
-{
- struct tm6000_core *dev = i2c_adap->algo_data;
- int addr, rc, i, byte;
-
- if (num <= 0)
- return 0;
- for (i = 0; i < num; i++) {
- addr = (msgs[i].addr << 1) & 0xff;
- i2c_dprintk(2, "%s %s addr=0x%x len=%d:",
- (msgs[i].flags & I2C_M_RD) ? "read" : "write",
- i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
- if (msgs[i].flags & I2C_M_RD) {
- /* read request without preceding register selection */
- /*
- * The TM6000 only supports a read transaction
- * immediately after a 1 or 2 byte write to select
- * a register. We cannot fulfil this request.
- */
- i2c_dprintk(2, " read without preceding write not"
- " supported");
- rc = -EOPNOTSUPP;
- goto err;
- } else if (i + 1 < num && msgs[i].len <= 2 &&
- (msgs[i + 1].flags & I2C_M_RD) &&
- msgs[i].addr == msgs[i + 1].addr) {
- /* 1 or 2 byte write followed by a read */
- if (i2c_debug >= 2)
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(" %02x", msgs[i].buf[byte]);
- i2c_dprintk(2, "; joined to read %s len=%d:",
- i == num - 2 ? "stop" : "nonstop",
- msgs[i + 1].len);
-
- if (msgs[i].len == 2) {
- rc = tm6000_i2c_recv_regs16(dev, addr,
- msgs[i].buf[0] << 8 | msgs[i].buf[1],
- msgs[i + 1].buf, msgs[i + 1].len);
- } else {
- rc = tm6000_i2c_recv_regs(dev, addr, msgs[i].buf[0],
- msgs[i + 1].buf, msgs[i + 1].len);
- }
-
- i++;
-
- if (addr == dev->tuner_addr << 1) {
- tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
- tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
- }
- if (i2c_debug >= 2)
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(" %02x", msgs[i].buf[byte]);
- } else {
- /* write bytes */
- if (i2c_debug >= 2)
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(" %02x", msgs[i].buf[byte]);
- rc = tm6000_i2c_send_regs(dev, addr, msgs[i].buf[0],
- msgs[i].buf + 1, msgs[i].len - 1);
-
- if (addr == dev->tuner_addr << 1) {
- tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
- tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
- }
- }
- if (i2c_debug >= 2)
- printk("\n");
- if (rc < 0)
- goto err;
- }
-
- return num;
-err:
- i2c_dprintk(2, " ERROR: %i\n", rc);
- return rc;
-}
-
-static int tm6000_i2c_eeprom(struct tm6000_core *dev)
-{
- int i, rc;
- unsigned char *p = dev->eedata;
- unsigned char bytes[17];
-
- dev->i2c_client.addr = 0xa0 >> 1;
- dev->eedata_size = 0;
-
- bytes[16] = '\0';
- for (i = 0; i < sizeof(dev->eedata); ) {
- *p = i;
- rc = tm6000_i2c_recv_regs(dev, 0xa0, i, p, 1);
- if (rc < 1) {
- if (p == dev->eedata)
- goto noeeprom;
- else {
- printk(KERN_WARNING
- "%s: i2c eeprom read error (err=%d)\n",
- dev->name, rc);
- }
- return -EINVAL;
- }
- dev->eedata_size++;
- p++;
- if (0 == (i % 16))
- printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
- printk(" %02x", dev->eedata[i]);
- if ((dev->eedata[i] >= ' ') && (dev->eedata[i] <= 'z'))
- bytes[i%16] = dev->eedata[i];
- else
- bytes[i%16] = '.';
-
- i++;
-
- if (0 == (i % 16)) {
- bytes[16] = '\0';
- printk(" %s\n", bytes);
- }
- }
- if (0 != (i%16)) {
- bytes[i%16] = '\0';
- for (i %= 16; i < 16; i++)
- printk(" ");
- printk(" %s\n", bytes);
- }
-
- return 0;
-
-noeeprom:
- printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
- dev->name, rc);
- return -EINVAL;
-}
-
-/* ----------------------------------------------------------- */
-
-/*
- * functionality()
- */
-static u32 functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm tm6000_algo = {
- .master_xfer = tm6000_i2c_xfer,
- .functionality = functionality,
-};
-
-/* ----------------------------------------------------------- */
-
-/*
- * tm6000_i2c_register()
- * register i2c bus
- */
-int tm6000_i2c_register(struct tm6000_core *dev)
-{
- int rc;
-
- dev->i2c_adap.owner = THIS_MODULE;
- dev->i2c_adap.algo = &tm6000_algo;
- dev->i2c_adap.dev.parent = &dev->udev->dev;
- strlcpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name));
- dev->i2c_adap.algo_data = dev;
- i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
- rc = i2c_add_adapter(&dev->i2c_adap);
- if (rc)
- return rc;
-
- dev->i2c_client.adapter = &dev->i2c_adap;
- strlcpy(dev->i2c_client.name, "tm6000 internal", I2C_NAME_SIZE);
- tm6000_i2c_eeprom(dev);
-
- return 0;
-}
-
-/*
- * tm6000_i2c_unregister()
- * unregister i2c_bus
- */
-int tm6000_i2c_unregister(struct tm6000_core *dev)
-{
- i2c_del_adapter(&dev->i2c_adap);
- return 0;
-}
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
deleted file mode 100644
index 70a2c5f..0000000
--- a/drivers/staging/tm6000/tm6000-input.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <linux/input.h>
-#include <linux/usb.h>
-
-#include <media/rc-core.h>
-
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-static unsigned int ir_debug;
-module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug, "enable debug message [IR]");
-
-static unsigned int enable_ir = 1;
-module_param(enable_ir, int, 0644);
-MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
-
-/* number of 50ms for ON-OFF-ON power led */
-/* show IR activity */
-#define PWLED_OFF 2
-
-#undef dprintk
-
-#define dprintk(fmt, arg...) \
- if (ir_debug) { \
- printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
- }
-
-struct tm6000_ir_poll_result {
- u16 rc_data;
-};
-
-struct tm6000_IR {
- struct tm6000_core *dev;
- struct rc_dev *rc;
- char name[32];
- char phys[32];
-
- /* poll expernal decoder */
- int polling;
- struct delayed_work work;
- u8 wait:1;
- u8 key:1;
- u8 pwled:1;
- u8 pwledcnt;
- u16 key_addr;
- struct urb *int_urb;
- u8 *urb_data;
-
- int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
-
- /* IR device properties */
- u64 rc_type;
-};
-
-
-void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
-{
- struct tm6000_IR *ir = dev->ir;
-
- if (!dev->ir)
- return;
-
- if (state)
- ir->wait = 1;
- else
- ir->wait = 0;
-}
-
-
-static int tm6000_ir_config(struct tm6000_IR *ir)
-{
- struct tm6000_core *dev = ir->dev;
- u8 buf[10];
- int rc;
-
- switch (ir->rc_type) {
- case RC_TYPE_NEC:
- /* Setup IR decoder for NEC standard 12MHz system clock */
- /* IR_LEADER_CNT = 0.9ms */
- tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
- tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
- /* IR_PULSE_CNT = 0.7ms */
- tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
- tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
- /* Remote WAKEUP = enable */
- tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
- /* IR_WKUP_SEL = Low byte in decoded IR data */
- tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
- /* IR_WKU_ADD code */
- tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
- tm6000_flash_led(dev, 0);
- msleep(100);
- tm6000_flash_led(dev, 1);
- break;
- default:
- /* hack */
- buf[0] = 0xff;
- buf[1] = 0xff;
- buf[2] = 0xf2;
- buf[3] = 0x2b;
- buf[4] = 0x20;
- buf[5] = 0x35;
- buf[6] = 0x60;
- buf[7] = 0x04;
- buf[8] = 0xc0;
- buf[9] = 0x08;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
- msleep(100);
-
- if (rc < 0) {
- printk(KERN_INFO "IR configuration failed");
- return rc;
- }
- break;
- }
-
- return 0;
-}
-
-static void tm6000_ir_urb_received(struct urb *urb)
-{
- struct tm6000_core *dev = urb->context;
- struct tm6000_IR *ir = dev->ir;
- int rc;
-
- if (urb->status != 0)
- printk(KERN_INFO "not ready\n");
- else if (urb->actual_length > 0) {
- memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
-
- dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
- ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
-
- ir->key = 1;
- }
-
- rc = usb_submit_urb(urb, GFP_ATOMIC);
-}
-
-static int default_polling_getkey(struct tm6000_IR *ir,
- struct tm6000_ir_poll_result *poll_result)
-{
- struct tm6000_core *dev = ir->dev;
- int rc;
- u8 buf[2];
-
- if (ir->wait && !&dev->int_in)
- return 0;
-
- if (&dev->int_in) {
- switch (ir->rc_type) {
- case RC_TYPE_RC5:
- poll_result->rc_data = ir->urb_data[0];
- break;
- case RC_TYPE_NEC:
- if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) {
- poll_result->rc_data = ir->urb_data[0]
- | ir->urb_data[1] << 8;
- }
- break;
- default:
- poll_result->rc_data = ir->urb_data[0]
- | ir->urb_data[1] << 8;
- break;
- }
- } else {
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
- msleep(10);
- tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
- msleep(10);
-
- if (ir->rc_type == RC_TYPE_RC5) {
- rc = tm6000_read_write_usb(dev, USB_DIR_IN |
- USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_02_GET_IR_CODE, 0, 0, buf, 1);
-
- msleep(10);
-
- dprintk("read data=%02x\n", buf[0]);
- if (rc < 0)
- return rc;
-
- poll_result->rc_data = buf[0];
- } else {
- rc = tm6000_read_write_usb(dev, USB_DIR_IN |
- USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- REQ_02_GET_IR_CODE, 0, 0, buf, 2);
-
- msleep(10);
-
- dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
- if (rc < 0)
- return rc;
-
- poll_result->rc_data = buf[0] | buf[1] << 8;
- }
- if ((poll_result->rc_data & 0x00ff) != 0xff)
- ir->key = 1;
- }
- return 0;
-}
-
-static void tm6000_ir_handle_key(struct tm6000_IR *ir)
-{
- struct tm6000_core *dev = ir->dev;
- int result;
- struct tm6000_ir_poll_result poll_result;
-
- /* read the registers containing the IR status */
- result = ir->get_key(ir, &poll_result);
- if (result < 0) {
- printk(KERN_INFO "ir->get_key() failed %d\n", result);
- return;
- }
-
- dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
-
- if (ir->pwled) {
- if (ir->pwledcnt >= PWLED_OFF) {
- ir->pwled = 0;
- ir->pwledcnt = 0;
- tm6000_flash_led(dev, 1);
- } else
- ir->pwledcnt += 1;
- }
-
- if (ir->key) {
- rc_keydown(ir->rc, poll_result.rc_data, 0);
- ir->key = 0;
- ir->pwled = 1;
- ir->pwledcnt = 0;
- tm6000_flash_led(dev, 0);
- }
- return;
-}
-
-static void tm6000_ir_work(struct work_struct *work)
-{
- struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
-
- tm6000_ir_handle_key(ir);
- schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
-}
-
-static int tm6000_ir_start(struct rc_dev *rc)
-{
- struct tm6000_IR *ir = rc->priv;
-
- INIT_DELAYED_WORK(&ir->work, tm6000_ir_work);
- schedule_delayed_work(&ir->work, 0);
-
- return 0;
-}
-
-static void tm6000_ir_stop(struct rc_dev *rc)
-{
- struct tm6000_IR *ir = rc->priv;
-
- cancel_delayed_work_sync(&ir->work);
-}
-
-int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
-{
- struct tm6000_IR *ir = rc->priv;
-
- if (!ir)
- return 0;
-
- if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
- ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
-
- ir->get_key = default_polling_getkey;
- ir->rc_type = rc_type;
-
- tm6000_ir_config(ir);
- /* TODO */
- return 0;
-}
-
-int tm6000_ir_int_start(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir = dev->ir;
- int pipe, size;
- int err = -ENOMEM;
-
-
- if (!ir)
- return -ENODEV;
-
- ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ir->int_urb)
- return -ENOMEM;
-
- pipe = usb_rcvintpipe(dev->udev,
- dev->int_in.endp->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
-
- size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
- dprintk("IR max size: %d\n", size);
-
- ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
- if (ir->int_urb->transfer_buffer == NULL) {
- usb_free_urb(ir->int_urb);
- return err;
- }
- dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
- usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
- ir->int_urb->transfer_buffer, size,
- tm6000_ir_urb_received, dev,
- dev->int_in.endp->desc.bInterval);
- err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
- if (err) {
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
- return err;
- }
- ir->urb_data = kzalloc(size, GFP_KERNEL);
-
- return 0;
-}
-
-void tm6000_ir_int_stop(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir = dev->ir;
-
- if (!ir)
- return;
-
- usb_kill_urb(ir->int_urb);
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
- ir->int_urb = NULL;
- kfree(ir->urb_data);
- ir->urb_data = NULL;
-}
-
-int tm6000_ir_init(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir;
- struct rc_dev *rc;
- int err = -ENOMEM;
-
- if (!enable_ir)
- return -ENODEV;
-
- if (!dev->caps.has_remote)
- return 0;
-
- if (!dev->ir_codes)
- return 0;
-
- ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- rc = rc_allocate_device();
- if (!ir || !rc)
- goto out;
-
- /* record handles to ourself */
- ir->dev = dev;
- dev->ir = ir;
- ir->rc = rc;
-
- /* input einrichten */
- rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
- rc->priv = ir;
- rc->change_protocol = tm6000_ir_change_protocol;
- rc->open = tm6000_ir_start;
- rc->close = tm6000_ir_stop;
- rc->driver_type = RC_DRIVER_SCANCODE;
-
- ir->polling = 50;
- ir->pwled = 0;
- ir->pwledcnt = 0;
-
-
- snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
- dev->name);
-
- usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
- strlcat(ir->phys, "/input0", sizeof(ir->phys));
-
- tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
-
- rc->input_name = ir->name;
- rc->input_phys = ir->phys;
- rc->input_id.bustype = BUS_USB;
- rc->input_id.version = 1;
- rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
- rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
- rc->map_name = dev->ir_codes;
- rc->driver_name = "tm6000";
- rc->dev.parent = &dev->udev->dev;
-
- if (&dev->int_in) {
- dprintk("IR over int\n");
-
- err = tm6000_ir_int_start(dev);
-
- if (err)
- goto out;
- }
-
- /* ir register */
- err = rc_register_device(rc);
- if (err)
- goto out;
-
- return 0;
-
-out:
- dev->ir = NULL;
- rc_free_device(rc);
- kfree(ir);
- return err;
-}
-
-int tm6000_ir_fini(struct tm6000_core *dev)
-{
- struct tm6000_IR *ir = dev->ir;
-
- /* skip detach on non attached board */
-
- if (!ir)
- return 0;
-
- rc_unregister_device(ir->rc);
-
- if (ir->int_urb)
- tm6000_ir_int_stop(dev);
-
- kfree(ir);
- dev->ir = NULL;
-
- return 0;
-}
diff --git a/drivers/staging/tm6000/tm6000-regs.h b/drivers/staging/tm6000/tm6000-regs.h
deleted file mode 100644
index 5375a83..0000000
--- a/drivers/staging/tm6000/tm6000-regs.h
+++ /dev/null
@@ -1,598 +0,0 @@
-/*
- * tm6000-regs.h - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Define TV Master TM5600/TM6000/TM6010 Request codes
- */
-#define REQ_00_SET_IR_VALUE 0
-#define REQ_01_SET_WAKEUP_IRCODE 1
-#define REQ_02_GET_IR_CODE 2
-#define REQ_03_SET_GET_MCU_PIN 3
-#define REQ_04_EN_DISABLE_MCU_INT 4
-#define REQ_05_SET_GET_USBREG 5
- /* Write: RegNum, Value, 0 */
- /* Read : RegNum, Value, 1, RegStatus */
-#define REQ_06_SET_GET_USBREG_BIT 6
-#define REQ_07_SET_GET_AVREG 7
- /* Write: RegNum, Value, 0 */
- /* Read : RegNum, Value, 1, RegStatus */
-#define REQ_08_SET_GET_AVREG_BIT 8
-#define REQ_09_SET_GET_TUNER_FQ 9
-#define REQ_10_SET_TUNER_SYSTEM 10
-#define REQ_11_SET_EEPROM_ADDR 11
-#define REQ_12_SET_GET_EEPROMBYTE 12
-#define REQ_13_GET_EEPROM_SEQREAD 13
-#define REQ_14_SET_GET_I2C_WR2_RDN 14
-#define REQ_15_SET_GET_I2CBYTE 15
- /* Write: Subaddr, Slave Addr, value, 0 */
- /* Read : Subaddr, Slave Addr, value, 1 */
-#define REQ_16_SET_GET_I2C_WR1_RDN 16
- /* Subaddr, Slave Addr, 0, length */
-#define REQ_17_SET_GET_I2CFP 17
- /* Write: Slave Addr, register, value */
- /* Read : Slave Addr, register, 2, data */
-#define REQ_20_DATA_TRANSFER 20
-#define REQ_30_I2C_WRITE 30
-#define REQ_31_I2C_READ 31
-#define REQ_35_AFTEK_TUNER_READ 35
-#define REQ_40_GET_VERSION 40
-#define REQ_50_SET_START 50
-#define REQ_51_SET_STOP 51
-#define REQ_52_TRANSMIT_DATA 52
-#define REQ_53_SPI_INITIAL 53
-#define REQ_54_SPI_SETSTART 54
-#define REQ_55_SPI_INOUTDATA 55
-#define REQ_56_SPI_SETSTOP 56
-
-/*
- * Define TV Master TM5600/TM6000/TM6010 GPIO lines
- */
-
-#define TM6000_GPIO_CLK 0x101
-#define TM6000_GPIO_DATA 0x100
-
-#define TM6000_GPIO_1 0x102
-#define TM6000_GPIO_2 0x103
-#define TM6000_GPIO_3 0x104
-#define TM6000_GPIO_4 0x300
-#define TM6000_GPIO_5 0x301
-#define TM6000_GPIO_6 0x304
-#define TM6000_GPIO_7 0x305
-
-/* tm6010 defines GPIO with different values */
-#define TM6010_GPIO_0 0x0102
-#define TM6010_GPIO_1 0x0103
-#define TM6010_GPIO_2 0x0104
-#define TM6010_GPIO_3 0x0105
-#define TM6010_GPIO_4 0x0106
-#define TM6010_GPIO_5 0x0107
-#define TM6010_GPIO_6 0x0300
-#define TM6010_GPIO_7 0x0301
-#define TM6010_GPIO_9 0x0305
-/*
- * Define TV Master TM5600/TM6000/TM6010 URB message codes and length
- */
-
-enum {
- TM6000_URB_MSG_VIDEO=1,
- TM6000_URB_MSG_AUDIO,
- TM6000_URB_MSG_VBI,
- TM6000_URB_MSG_PTS,
- TM6000_URB_MSG_ERR,
-};
-
-/* Define specific TM6000 Video decoder registers */
-#define TM6000_REQ07_RD8_TEST_SEL 0x07, 0xd8
-#define TM6000_REQ07_RD9_A_SIM_SEL 0x07, 0xd9
-#define TM6000_REQ07_RDA_CLK_SEL 0x07, 0xda
-#define TM6000_REQ07_RDB_OUT_SEL 0x07, 0xdb
-#define TM6000_REQ07_RDC_NSEL_I2S 0x07, 0xdc
-#define TM6000_REQ07_RDD_GPIO2_MDRV 0x07, 0xdd
-#define TM6000_REQ07_RDE_GPIO1_MDRV 0x07, 0xde
-#define TM6000_REQ07_RDF_PWDOWN_ACLK 0x07, 0xdf
-#define TM6000_REQ07_RE0_VADC_REF_CTL 0x07, 0xe0
-#define TM6000_REQ07_RE1_VADC_DACLIMP 0x07, 0xe1
-#define TM6000_REQ07_RE2_VADC_STATUS_CTL 0x07, 0xe2
-#define TM6000_REQ07_RE3_VADC_INP_LPF_SEL1 0x07, 0xe3
-#define TM6000_REQ07_RE4_VADC_TARGET1 0x07, 0xe4
-#define TM6000_REQ07_RE5_VADC_INP_LPF_SEL2 0x07, 0xe5
-#define TM6000_REQ07_RE6_VADC_TARGET2 0x07, 0xe6
-#define TM6000_REQ07_RE7_VADC_AGAIN_CTL 0x07, 0xe7
-#define TM6000_REQ07_RE8_VADC_PWDOWN_CTL 0x07, 0xe8
-#define TM6000_REQ07_RE9_VADC_INPUT_CTL1 0x07, 0xe9
-#define TM6000_REQ07_REA_VADC_INPUT_CTL2 0x07, 0xea
-#define TM6000_REQ07_REB_VADC_AADC_MODE 0x07, 0xeb
-#define TM6000_REQ07_REC_VADC_AADC_LVOL 0x07, 0xec
-#define TM6000_REQ07_RED_VADC_AADC_RVOL 0x07, 0xed
-#define TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL 0x07, 0xee
-#define TM6000_REQ07_REF_VADC_GAIN_MAP_CTL 0x07, 0xef
-#define TM6000_REQ07_RFD_BIST_ERR_VST_LOW 0x07, 0xfd
-#define TM6000_REQ07_RFE_BIST_ERR_VST_HIGH 0x07, 0xfe
-
-/* Define TM6000/TM6010 Video decoder registers */
-#define TM6010_REQ07_R00_VIDEO_CONTROL0 0x07, 0x00
-#define TM6010_REQ07_R01_VIDEO_CONTROL1 0x07, 0x01
-#define TM6010_REQ07_R02_VIDEO_CONTROL2 0x07, 0x02
-#define TM6010_REQ07_R03_YC_SEP_CONTROL 0x07, 0x03
-#define TM6010_REQ07_R04_LUMA_HAGC_CONTROL 0x07, 0x04
-#define TM6010_REQ07_R05_NOISE_THRESHOLD 0x07, 0x05
-#define TM6010_REQ07_R06_AGC_GATE_THRESHOLD 0x07, 0x06
-#define TM6010_REQ07_R07_OUTPUT_CONTROL 0x07, 0x07
-#define TM6010_REQ07_R08_LUMA_CONTRAST_ADJ 0x07, 0x08
-#define TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ 0x07, 0x09
-#define TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ 0x07, 0x0a
-#define TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ 0x07, 0x0b
-#define TM6010_REQ07_R0C_CHROMA_AGC_CONTROL 0x07, 0x0c
-#define TM6010_REQ07_R0D_CHROMA_KILL_LEVEL 0x07, 0x0d
-#define TM6010_REQ07_R0F_CHROMA_AUTO_POSITION 0x07, 0x0f
-#define TM6010_REQ07_R10_AGC_PEAK_NOMINAL 0x07, 0x10
-#define TM6010_REQ07_R11_AGC_PEAK_CONTROL 0x07, 0x11
-#define TM6010_REQ07_R12_AGC_GATE_STARTH 0x07, 0x12
-#define TM6010_REQ07_R13_AGC_GATE_STARTL 0x07, 0x13
-#define TM6010_REQ07_R14_AGC_GATE_WIDTH 0x07, 0x14
-#define TM6010_REQ07_R15_AGC_BP_DELAY 0x07, 0x15
-#define TM6010_REQ07_R16_LOCK_COUNT 0x07, 0x16
-#define TM6010_REQ07_R17_HLOOP_MAXSTATE 0x07, 0x17
-#define TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3 0x07, 0x18
-#define TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2 0x07, 0x19
-#define TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1 0x07, 0x1a
-#define TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0 0x07, 0x1b
-#define TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3 0x07, 0x1c
-#define TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2 0x07, 0x1d
-#define TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1 0x07, 0x1e
-#define TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0 0x07, 0x1f
-#define TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME 0x07, 0x20
-#define TM6010_REQ07_R21_HSYNC_PHASE_OFFSET 0x07, 0x21
-#define TM6010_REQ07_R22_HSYNC_PLL_START_TIME 0x07, 0x22
-#define TM6010_REQ07_R23_HSYNC_PLL_END_TIME 0x07, 0x23
-#define TM6010_REQ07_R24_HSYNC_TIP_START_TIME 0x07, 0x24
-#define TM6010_REQ07_R25_HSYNC_TIP_END_TIME 0x07, 0x25
-#define TM6010_REQ07_R26_HSYNC_RISING_EDGE_START 0x07, 0x26
-#define TM6010_REQ07_R27_HSYNC_RISING_EDGE_END 0x07, 0x27
-#define TM6010_REQ07_R28_BACKPORCH_START 0x07, 0x28
-#define TM6010_REQ07_R29_BACKPORCH_END 0x07, 0x29
-#define TM6010_REQ07_R2A_HSYNC_FILTER_START 0x07, 0x2a
-#define TM6010_REQ07_R2B_HSYNC_FILTER_END 0x07, 0x2b
-#define TM6010_REQ07_R2C_CHROMA_BURST_START 0x07, 0x2c
-#define TM6010_REQ07_R2D_CHROMA_BURST_END 0x07, 0x2d
-#define TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART 0x07, 0x2e
-#define TM6010_REQ07_R2F_ACTIVE_VIDEO_HWIDTH 0x07, 0x2f
-#define TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART 0x07, 0x30
-#define TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT 0x07, 0x31
-#define TM6010_REQ07_R32_VSYNC_HLOCK_MIN 0x07, 0x32
-#define TM6010_REQ07_R33_VSYNC_HLOCK_MAX 0x07, 0x33
-#define TM6010_REQ07_R34_VSYNC_AGC_MIN 0x07, 0x34
-#define TM6010_REQ07_R35_VSYNC_AGC_MAX 0x07, 0x35
-#define TM6010_REQ07_R36_VSYNC_VBI_MIN 0x07, 0x36
-#define TM6010_REQ07_R37_VSYNC_VBI_MAX 0x07, 0x37
-#define TM6010_REQ07_R38_VSYNC_THRESHOLD 0x07, 0x38
-#define TM6010_REQ07_R39_VSYNC_TIME_CONSTANT 0x07, 0x39
-#define TM6010_REQ07_R3A_STATUS1 0x07, 0x3a
-#define TM6010_REQ07_R3B_STATUS2 0x07, 0x3b
-#define TM6010_REQ07_R3C_STATUS3 0x07, 0x3c
-#define TM6010_REQ07_R3F_RESET 0x07, 0x3f
-#define TM6010_REQ07_R40_TELETEXT_VBI_CODE0 0x07, 0x40
-#define TM6010_REQ07_R41_TELETEXT_VBI_CODE1 0x07, 0x41
-#define TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL 0x07, 0x42
-#define TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7 0x07, 0x43
-#define TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8 0x07, 0x44
-#define TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9 0x07, 0x45
-#define TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10 0x07, 0x46
-#define TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11 0x07, 0x47
-#define TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12 0x07, 0x48
-#define TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13 0x07, 0x49
-#define TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14 0x07, 0x4a
-#define TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15 0x07, 0x4b
-#define TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16 0x07, 0x4c
-#define TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17 0x07, 0x4d
-#define TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18 0x07, 0x4e
-#define TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19 0x07, 0x4f
-#define TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20 0x07, 0x50
-#define TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21 0x07, 0x51
-#define TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22 0x07, 0x52
-#define TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23 0x07, 0x53
-#define TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES 0x07, 0x54
-#define TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN 0x07, 0x55
-#define TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN 0x07, 0x56
-#define TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN 0x07, 0x57
-#define TM6010_REQ07_R58_VBI_CAPTION_DTO1 0x07, 0x58
-#define TM6010_REQ07_R59_VBI_CAPTION_DTO0 0x07, 0x59
-#define TM6010_REQ07_R5A_VBI_TELETEXT_DTO1 0x07, 0x5a
-#define TM6010_REQ07_R5B_VBI_TELETEXT_DTO0 0x07, 0x5b
-#define TM6010_REQ07_R5C_VBI_WSS625_DTO1 0x07, 0x5c
-#define TM6010_REQ07_R5D_VBI_WSS625_DTO0 0x07, 0x5d
-#define TM6010_REQ07_R5E_VBI_CAPTION_FRAME_START 0x07, 0x5e
-#define TM6010_REQ07_R5F_VBI_WSS625_FRAME_START 0x07, 0x5f
-#define TM6010_REQ07_R60_TELETEXT_FRAME_START 0x07, 0x60
-#define TM6010_REQ07_R61_VBI_CCDATA1 0x07, 0x61
-#define TM6010_REQ07_R62_VBI_CCDATA2 0x07, 0x62
-#define TM6010_REQ07_R63_VBI_WSS625_DATA1 0x07, 0x63
-#define TM6010_REQ07_R64_VBI_WSS625_DATA2 0x07, 0x64
-#define TM6010_REQ07_R65_VBI_DATA_STATUS 0x07, 0x65
-#define TM6010_REQ07_R66_VBI_CAPTION_START 0x07, 0x66
-#define TM6010_REQ07_R67_VBI_WSS625_START 0x07, 0x67
-#define TM6010_REQ07_R68_VBI_TELETEXT_START 0x07, 0x68
-#define TM6010_REQ07_R70_HSYNC_DTO_INC_STATUS3 0x07, 0x70
-#define TM6010_REQ07_R71_HSYNC_DTO_INC_STATUS2 0x07, 0x71
-#define TM6010_REQ07_R72_HSYNC_DTO_INC_STATUS1 0x07, 0x72
-#define TM6010_REQ07_R73_HSYNC_DTO_INC_STATUS0 0x07, 0x73
-#define TM6010_REQ07_R74_CHROMA_DTO_INC_STATUS3 0x07, 0x74
-#define TM6010_REQ07_R75_CHROMA_DTO_INC_STATUS2 0x07, 0x75
-#define TM6010_REQ07_R76_CHROMA_DTO_INC_STATUS1 0x07, 0x76
-#define TM6010_REQ07_R77_CHROMA_DTO_INC_STATUS0 0x07, 0x77
-#define TM6010_REQ07_R78_AGC_AGAIN_STATUS 0x07, 0x78
-#define TM6010_REQ07_R79_AGC_DGAIN_STATUS 0x07, 0x79
-#define TM6010_REQ07_R7A_CHROMA_MAG_STATUS 0x07, 0x7a
-#define TM6010_REQ07_R7B_CHROMA_GAIN_STATUS1 0x07, 0x7b
-#define TM6010_REQ07_R7C_CHROMA_GAIN_STATUS0 0x07, 0x7c
-#define TM6010_REQ07_R7D_CORDIC_FREQ_STATUS 0x07, 0x7d
-#define TM6010_REQ07_R7F_STATUS_NOISE 0x07, 0x7f
-#define TM6010_REQ07_R80_COMB_FILTER_TRESHOLD 0x07, 0x80
-#define TM6010_REQ07_R82_COMB_FILTER_CONFIG 0x07, 0x82
-#define TM6010_REQ07_R83_CHROMA_LOCK_CONFIG 0x07, 0x83
-#define TM6010_REQ07_R84_NOISE_NTSC_C 0x07, 0x84
-#define TM6010_REQ07_R85_NOISE_PAL_C 0x07, 0x85
-#define TM6010_REQ07_R86_NOISE_PHASE_C 0x07, 0x86
-#define TM6010_REQ07_R87_NOISE_PHASE_Y 0x07, 0x87
-#define TM6010_REQ07_R8A_CHROMA_LOOPFILTER_STATE 0x07, 0x8a
-#define TM6010_REQ07_R8B_CHROMA_HRESAMPLER 0x07, 0x8b
-#define TM6010_REQ07_R8D_CPUMP_DELAY_ADJ 0x07, 0x8d
-#define TM6010_REQ07_R8E_CPUMP_ADJ 0x07, 0x8e
-#define TM6010_REQ07_R8F_CPUMP_DELAY 0x07, 0x8f
-
-/* Define TM6000/TM6010 Miscellaneous registers */
-#define TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE 0x07, 0xc0
-#define TM6010_REQ07_RC1_TRESHOLD 0x07, 0xc1
-#define TM6010_REQ07_RC2_HSYNC_WIDTH 0x07, 0xc2
-#define TM6010_REQ07_RC3_HSTART1 0x07, 0xc3
-#define TM6010_REQ07_RC4_HSTART0 0x07, 0xc4
-#define TM6010_REQ07_RC5_HEND1 0x07, 0xc5
-#define TM6010_REQ07_RC6_HEND0 0x07, 0xc6
-#define TM6010_REQ07_RC7_VSTART1 0x07, 0xc7
-#define TM6010_REQ07_RC8_VSTART0 0x07, 0xc8
-#define TM6010_REQ07_RC9_VEND1 0x07, 0xc9
-#define TM6010_REQ07_RCA_VEND0 0x07, 0xca
-#define TM6010_REQ07_RCB_DELAY 0x07, 0xcb
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RCC_ACTIVE_VIDEO_IF 0x07, 0xcc
-#define TM6010_REQ07_RD0_USB_PERIPHERY_CONTROL 0x07, 0xd0
-#define TM6010_REQ07_RD1_ADDR_FOR_REQ1 0x07, 0xd1
-#define TM6010_REQ07_RD2_ADDR_FOR_REQ2 0x07, 0xd2
-#define TM6010_REQ07_RD3_ADDR_FOR_REQ3 0x07, 0xd3
-#define TM6010_REQ07_RD4_ADDR_FOR_REQ4 0x07, 0xd4
-#define TM6010_REQ07_RD5_POWERSAVE 0x07, 0xd5
-#define TM6010_REQ07_RD6_ENDP_REQ1_REQ2 0x07, 0xd6
-#define TM6010_REQ07_RD7_ENDP_REQ3_REQ4 0x07, 0xd7
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR 0x07, 0xd8
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_BSIZE 0x07, 0xd9
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_WAKEUP_SEL 0x07, 0xda
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_WAKEUP_ADD 0x07, 0xdb
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_LEADER1 0x07, 0xdc
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_LEADER0 0x07, 0xdd
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_PULSE_CNT1 0x07, 0xde
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RD8_IR_PULSE_CNT0 0x07, 0xdf
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE0_DVIDEO_SOURCE 0x07, 0xe0
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE0_DVIDEO_SOURCE_IF 0x07, 0xe1
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE2_OUT_SEL2 0x07, 0xe2
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE3_OUT_SEL1 0x07, 0xe3
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE4_OUT_SEL0 0x07, 0xe4
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE5_REMOTE_WAKEUP 0x07, 0xe5
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE7_PUB_GPIO 0x07, 0xe7
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE8_TYPESEL_MOS_I2S 0x07, 0xe8
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RE9_TYPESEL_MOS_TS 0x07, 0xe9
-/* ONLY for TM6010 */
-#define TM6010_REQ07_REA_TYPESEL_MOS_CCIR 0x07, 0xea
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF0_BIST_CRC_RESULT0 0x07, 0xf0
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF1_BIST_CRC_RESULT1 0x07, 0xf1
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF2_BIST_CRC_RESULT2 0x07, 0xf2
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF3_BIST_CRC_RESULT3 0x07, 0xf3
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF4_BIST_ERR_VST2 0x07, 0xf4
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF5_BIST_ERR_VST1 0x07, 0xf5
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF6_BIST_ERR_VST0 0x07, 0xf6
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RF7_BIST 0x07, 0xf7
-/* ONLY for TM6010 */
-#define TM6010_REQ07_RFE_POWER_DOWN 0x07, 0xfe
-#define TM6010_REQ07_RFF_SOFT_RESET 0x07, 0xff
-
-/* Define TM6000/TM6010 USB registers */
-#define TM6010_REQ05_R00_MAIN_CTRL 0x05, 0x00
-#define TM6010_REQ05_R01_DEVADDR 0x05, 0x01
-#define TM6010_REQ05_R02_TEST 0x05, 0x02
-#define TM6010_REQ05_R04_SOFN0 0x05, 0x04
-#define TM6010_REQ05_R05_SOFN1 0x05, 0x05
-#define TM6010_REQ05_R06_SOFTM0 0x05, 0x06
-#define TM6010_REQ05_R07_SOFTM1 0x05, 0x07
-#define TM6010_REQ05_R08_PHY_TEST 0x05, 0x08
-#define TM6010_REQ05_R09_VCTL 0x05, 0x09
-#define TM6010_REQ05_R0A_VSTA 0x05, 0x0a
-#define TM6010_REQ05_R0B_CX_CFG 0x05, 0x0b
-#define TM6010_REQ05_R0C_ENDP0_REG0 0x05, 0x0c
-#define TM6010_REQ05_R10_GMASK 0x05, 0x10
-#define TM6010_REQ05_R11_IMASK0 0x05, 0x11
-#define TM6010_REQ05_R12_IMASK1 0x05, 0x12
-#define TM6010_REQ05_R13_IMASK2 0x05, 0x13
-#define TM6010_REQ05_R14_IMASK3 0x05, 0x14
-#define TM6010_REQ05_R15_IMASK4 0x05, 0x15
-#define TM6010_REQ05_R16_IMASK5 0x05, 0x16
-#define TM6010_REQ05_R17_IMASK6 0x05, 0x17
-#define TM6010_REQ05_R18_IMASK7 0x05, 0x18
-#define TM6010_REQ05_R19_ZEROP0 0x05, 0x19
-#define TM6010_REQ05_R1A_ZEROP1 0x05, 0x1a
-#define TM6010_REQ05_R1C_FIFO_EMP0 0x05, 0x1c
-#define TM6010_REQ05_R1D_FIFO_EMP1 0x05, 0x1d
-#define TM6010_REQ05_R20_IRQ_GROUP 0x05, 0x20
-#define TM6010_REQ05_R21_IRQ_SOURCE0 0x05, 0x21
-#define TM6010_REQ05_R22_IRQ_SOURCE1 0x05, 0x22
-#define TM6010_REQ05_R23_IRQ_SOURCE2 0x05, 0x23
-#define TM6010_REQ05_R24_IRQ_SOURCE3 0x05, 0x24
-#define TM6010_REQ05_R25_IRQ_SOURCE4 0x05, 0x25
-#define TM6010_REQ05_R26_IRQ_SOURCE5 0x05, 0x26
-#define TM6010_REQ05_R27_IRQ_SOURCE6 0x05, 0x27
-#define TM6010_REQ05_R28_IRQ_SOURCE7 0x05, 0x28
-#define TM6010_REQ05_R29_SEQ_ERR0 0x05, 0x29
-#define TM6010_REQ05_R2A_SEQ_ERR1 0x05, 0x2a
-#define TM6010_REQ05_R2B_SEQ_ABORT0 0x05, 0x2b
-#define TM6010_REQ05_R2C_SEQ_ABORT1 0x05, 0x2c
-#define TM6010_REQ05_R2D_TX_ZERO0 0x05, 0x2d
-#define TM6010_REQ05_R2E_TX_ZERO1 0x05, 0x2e
-#define TM6010_REQ05_R2F_IDLE_CNT 0x05, 0x2f
-#define TM6010_REQ05_R30_FNO_P1 0x05, 0x30
-#define TM6010_REQ05_R31_FNO_P2 0x05, 0x31
-#define TM6010_REQ05_R32_FNO_P3 0x05, 0x32
-#define TM6010_REQ05_R33_FNO_P4 0x05, 0x33
-#define TM6010_REQ05_R34_FNO_P5 0x05, 0x34
-#define TM6010_REQ05_R35_FNO_P6 0x05, 0x35
-#define TM6010_REQ05_R36_FNO_P7 0x05, 0x36
-#define TM6010_REQ05_R37_FNO_P8 0x05, 0x37
-#define TM6010_REQ05_R38_FNO_P9 0x05, 0x38
-#define TM6010_REQ05_R30_FNO_P10 0x05, 0x39
-#define TM6010_REQ05_R30_FNO_P11 0x05, 0x3a
-#define TM6010_REQ05_R30_FNO_P12 0x05, 0x3b
-#define TM6010_REQ05_R30_FNO_P13 0x05, 0x3c
-#define TM6010_REQ05_R30_FNO_P14 0x05, 0x3d
-#define TM6010_REQ05_R30_FNO_P15 0x05, 0x3e
-#define TM6010_REQ05_R40_IN_MAXPS_LOW1 0x05, 0x40
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH1 0x05, 0x41
-#define TM6010_REQ05_R42_IN_MAXPS_LOW2 0x05, 0x42
-#define TM6010_REQ05_R43_IN_MAXPS_HIGH2 0x05, 0x43
-#define TM6010_REQ05_R44_IN_MAXPS_LOW3 0x05, 0x44
-#define TM6010_REQ05_R45_IN_MAXPS_HIGH3 0x05, 0x45
-#define TM6010_REQ05_R46_IN_MAXPS_LOW4 0x05, 0x46
-#define TM6010_REQ05_R47_IN_MAXPS_HIGH4 0x05, 0x47
-#define TM6010_REQ05_R48_IN_MAXPS_LOW5 0x05, 0x48
-#define TM6010_REQ05_R49_IN_MAXPS_HIGH5 0x05, 0x49
-#define TM6010_REQ05_R4A_IN_MAXPS_LOW6 0x05, 0x4a
-#define TM6010_REQ05_R4B_IN_MAXPS_HIGH6 0x05, 0x4b
-#define TM6010_REQ05_R4C_IN_MAXPS_LOW7 0x05, 0x4c
-#define TM6010_REQ05_R4D_IN_MAXPS_HIGH7 0x05, 0x4d
-#define TM6010_REQ05_R4E_IN_MAXPS_LOW8 0x05, 0x4e
-#define TM6010_REQ05_R4F_IN_MAXPS_HIGH8 0x05, 0x4f
-#define TM6010_REQ05_R50_IN_MAXPS_LOW9 0x05, 0x50
-#define TM6010_REQ05_R51_IN_MAXPS_HIGH9 0x05, 0x51
-#define TM6010_REQ05_R40_IN_MAXPS_LOW10 0x05, 0x52
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH10 0x05, 0x53
-#define TM6010_REQ05_R40_IN_MAXPS_LOW11 0x05, 0x54
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH11 0x05, 0x55
-#define TM6010_REQ05_R40_IN_MAXPS_LOW12 0x05, 0x56
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH12 0x05, 0x57
-#define TM6010_REQ05_R40_IN_MAXPS_LOW13 0x05, 0x58
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH13 0x05, 0x59
-#define TM6010_REQ05_R40_IN_MAXPS_LOW14 0x05, 0x5a
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH14 0x05, 0x5b
-#define TM6010_REQ05_R40_IN_MAXPS_LOW15 0x05, 0x5c
-#define TM6010_REQ05_R41_IN_MAXPS_HIGH15 0x05, 0x5d
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW1 0x05, 0x60
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH1 0x05, 0x61
-#define TM6010_REQ05_R62_OUT_MAXPS_LOW2 0x05, 0x62
-#define TM6010_REQ05_R63_OUT_MAXPS_HIGH2 0x05, 0x63
-#define TM6010_REQ05_R64_OUT_MAXPS_LOW3 0x05, 0x64
-#define TM6010_REQ05_R65_OUT_MAXPS_HIGH3 0x05, 0x65
-#define TM6010_REQ05_R66_OUT_MAXPS_LOW4 0x05, 0x66
-#define TM6010_REQ05_R67_OUT_MAXPS_HIGH4 0x05, 0x67
-#define TM6010_REQ05_R68_OUT_MAXPS_LOW5 0x05, 0x68
-#define TM6010_REQ05_R69_OUT_MAXPS_HIGH5 0x05, 0x69
-#define TM6010_REQ05_R6A_OUT_MAXPS_LOW6 0x05, 0x6a
-#define TM6010_REQ05_R6B_OUT_MAXPS_HIGH6 0x05, 0x6b
-#define TM6010_REQ05_R6C_OUT_MAXPS_LOW7 0x05, 0x6c
-#define TM6010_REQ05_R6D_OUT_MAXPS_HIGH7 0x05, 0x6d
-#define TM6010_REQ05_R6E_OUT_MAXPS_LOW8 0x05, 0x6e
-#define TM6010_REQ05_R6F_OUT_MAXPS_HIGH8 0x05, 0x6f
-#define TM6010_REQ05_R70_OUT_MAXPS_LOW9 0x05, 0x70
-#define TM6010_REQ05_R71_OUT_MAXPS_HIGH9 0x05, 0x71
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW10 0x05, 0x72
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH10 0x05, 0x73
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW11 0x05, 0x74
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH11 0x05, 0x75
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW12 0x05, 0x76
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH12 0x05, 0x77
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW13 0x05, 0x78
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH13 0x05, 0x79
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW14 0x05, 0x7a
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH14 0x05, 0x7b
-#define TM6010_REQ05_R60_OUT_MAXPS_LOW15 0x05, 0x7c
-#define TM6010_REQ05_R61_OUT_MAXPS_HIGH15 0x05, 0x7d
-#define TM6010_REQ05_R80_FIFO0 0x05, 0x80
-#define TM6010_REQ05_R81_FIFO1 0x05, 0x81
-#define TM6010_REQ05_R82_FIFO2 0x05, 0x82
-#define TM6010_REQ05_R83_FIFO3 0x05, 0x83
-#define TM6010_REQ05_R84_FIFO4 0x05, 0x84
-#define TM6010_REQ05_R85_FIFO5 0x05, 0x85
-#define TM6010_REQ05_R86_FIFO6 0x05, 0x86
-#define TM6010_REQ05_R87_FIFO7 0x05, 0x87
-#define TM6010_REQ05_R88_FIFO8 0x05, 0x88
-#define TM6010_REQ05_R89_FIFO9 0x05, 0x89
-#define TM6010_REQ05_R81_FIFO10 0x05, 0x8a
-#define TM6010_REQ05_R81_FIFO11 0x05, 0x8b
-#define TM6010_REQ05_R81_FIFO12 0x05, 0x8c
-#define TM6010_REQ05_R81_FIFO13 0x05, 0x8d
-#define TM6010_REQ05_R81_FIFO14 0x05, 0x8e
-#define TM6010_REQ05_R81_FIFO15 0x05, 0x8f
-#define TM6010_REQ05_R90_CFG_FIFO0 0x05, 0x90
-#define TM6010_REQ05_R91_CFG_FIFO1 0x05, 0x91
-#define TM6010_REQ05_R92_CFG_FIFO2 0x05, 0x92
-#define TM6010_REQ05_R93_CFG_FIFO3 0x05, 0x93
-#define TM6010_REQ05_R94_CFG_FIFO4 0x05, 0x94
-#define TM6010_REQ05_R95_CFG_FIFO5 0x05, 0x95
-#define TM6010_REQ05_R96_CFG_FIFO6 0x05, 0x96
-#define TM6010_REQ05_R97_CFG_FIFO7 0x05, 0x97
-#define TM6010_REQ05_R98_CFG_FIFO8 0x05, 0x98
-#define TM6010_REQ05_R99_CFG_FIFO9 0x05, 0x99
-#define TM6010_REQ05_R91_CFG_FIFO10 0x05, 0x9a
-#define TM6010_REQ05_R91_CFG_FIFO11 0x05, 0x9b
-#define TM6010_REQ05_R91_CFG_FIFO12 0x05, 0x9c
-#define TM6010_REQ05_R91_CFG_FIFO13 0x05, 0x9d
-#define TM6010_REQ05_R91_CFG_FIFO14 0x05, 0x9e
-#define TM6010_REQ05_R91_CFG_FIFO15 0x05, 0x9f
-#define TM6010_REQ05_RA0_CTL_FIFO0 0x05, 0xa0
-#define TM6010_REQ05_RA1_CTL_FIFO1 0x05, 0xa1
-#define TM6010_REQ05_RA2_CTL_FIFO2 0x05, 0xa2
-#define TM6010_REQ05_RA3_CTL_FIFO3 0x05, 0xa3
-#define TM6010_REQ05_RA4_CTL_FIFO4 0x05, 0xa4
-#define TM6010_REQ05_RA5_CTL_FIFO5 0x05, 0xa5
-#define TM6010_REQ05_RA6_CTL_FIFO6 0x05, 0xa6
-#define TM6010_REQ05_RA7_CTL_FIFO7 0x05, 0xa7
-#define TM6010_REQ05_RA8_CTL_FIFO8 0x05, 0xa8
-#define TM6010_REQ05_RA9_CTL_FIFO9 0x05, 0xa9
-#define TM6010_REQ05_RA1_CTL_FIFO10 0x05, 0xaa
-#define TM6010_REQ05_RA1_CTL_FIFO11 0x05, 0xab
-#define TM6010_REQ05_RA1_CTL_FIFO12 0x05, 0xac
-#define TM6010_REQ05_RA1_CTL_FIFO13 0x05, 0xad
-#define TM6010_REQ05_RA1_CTL_FIFO14 0x05, 0xae
-#define TM6010_REQ05_RA1_CTL_FIFO15 0x05, 0xaf
-#define TM6010_REQ05_RB0_BC_LOW_FIFO0 0x05, 0xb0
-#define TM6010_REQ05_RB1_BC_LOW_FIFO1 0x05, 0xb1
-#define TM6010_REQ05_RB2_BC_LOW_FIFO2 0x05, 0xb2
-#define TM6010_REQ05_RB3_BC_LOW_FIFO3 0x05, 0xb3
-#define TM6010_REQ05_RB4_BC_LOW_FIFO4 0x05, 0xb4
-#define TM6010_REQ05_RB5_BC_LOW_FIFO5 0x05, 0xb5
-#define TM6010_REQ05_RB6_BC_LOW_FIFO6 0x05, 0xb6
-#define TM6010_REQ05_RB7_BC_LOW_FIFO7 0x05, 0xb7
-#define TM6010_REQ05_RB8_BC_LOW_FIFO8 0x05, 0xb8
-#define TM6010_REQ05_RB9_BC_LOW_FIFO9 0x05, 0xb9
-#define TM6010_REQ05_RB1_BC_LOW_FIFO10 0x05, 0xba
-#define TM6010_REQ05_RB1_BC_LOW_FIFO11 0x05, 0xbb
-#define TM6010_REQ05_RB1_BC_LOW_FIFO12 0x05, 0xbc
-#define TM6010_REQ05_RB1_BC_LOW_FIFO13 0x05, 0xbd
-#define TM6010_REQ05_RB1_BC_LOW_FIFO14 0x05, 0xbe
-#define TM6010_REQ05_RB1_BC_LOW_FIFO15 0x05, 0xbf
-#define TM6010_REQ05_RC0_DATA_FIFO0 0x05, 0xc0
-#define TM6010_REQ05_RC4_DATA_FIFO1 0x05, 0xc4
-#define TM6010_REQ05_RC8_DATA_FIFO2 0x05, 0xc8
-#define TM6010_REQ05_RCC_DATA_FIFO3 0x05, 0xcc
-#define TM6010_REQ05_RD0_DATA_FIFO4 0x05, 0xd0
-#define TM6010_REQ05_RD4_DATA_FIFO5 0x05, 0xd4
-#define TM6010_REQ05_RD8_DATA_FIFO6 0x05, 0xd8
-#define TM6010_REQ05_RDC_DATA_FIFO7 0x05, 0xdc
-#define TM6010_REQ05_RE0_DATA_FIFO8 0x05, 0xe0
-#define TM6010_REQ05_RE4_DATA_FIFO9 0x05, 0xe4
-#define TM6010_REQ05_RC4_DATA_FIFO10 0x05, 0xe8
-#define TM6010_REQ05_RC4_DATA_FIFO11 0x05, 0xec
-#define TM6010_REQ05_RC4_DATA_FIFO12 0x05, 0xf0
-#define TM6010_REQ05_RC4_DATA_FIFO13 0x05, 0xf4
-#define TM6010_REQ05_RC4_DATA_FIFO14 0x05, 0xf8
-#define TM6010_REQ05_RC4_DATA_FIFO15 0x05, 0xfc
-
-/* Define TM6010 Audio decoder registers */
-/* This core available only in TM6010 */
-#define TM6010_REQ08_R00_A_VERSION 0x08, 0x00
-#define TM6010_REQ08_R01_A_INIT 0x08, 0x01
-#define TM6010_REQ08_R02_A_FIX_GAIN_CTRL 0x08, 0x02
-#define TM6010_REQ08_R03_A_AUTO_GAIN_CTRL 0x08, 0x03
-#define TM6010_REQ08_R04_A_SIF_AMP_CTRL 0x08, 0x04
-#define TM6010_REQ08_R05_A_STANDARD_MOD 0x08, 0x05
-#define TM6010_REQ08_R06_A_SOUND_MOD 0x08, 0x06
-#define TM6010_REQ08_R07_A_LEFT_VOL 0x08, 0x07
-#define TM6010_REQ08_R08_A_RIGHT_VOL 0x08, 0x08
-#define TM6010_REQ08_R09_A_MAIN_VOL 0x08, 0x09
-#define TM6010_REQ08_R0A_A_I2S_MOD 0x08, 0x0a
-#define TM6010_REQ08_R0B_A_ASD_THRES1 0x08, 0x0b
-#define TM6010_REQ08_R0C_A_ASD_THRES2 0x08, 0x0c
-#define TM6010_REQ08_R0D_A_AMD_THRES 0x08, 0x0d
-#define TM6010_REQ08_R0E_A_MONO_THRES1 0x08, 0x0e
-#define TM6010_REQ08_R0F_A_MONO_THRES2 0x08, 0x0f
-#define TM6010_REQ08_R10_A_MUTE_THRES1 0x08, 0x10
-#define TM6010_REQ08_R11_A_MUTE_THRES2 0x08, 0x11
-#define TM6010_REQ08_R12_A_AGC_U 0x08, 0x12
-#define TM6010_REQ08_R13_A_AGC_ERR_T 0x08, 0x13
-#define TM6010_REQ08_R14_A_AGC_GAIN_INIT 0x08, 0x14
-#define TM6010_REQ08_R15_A_AGC_STEP_THR 0x08, 0x15
-#define TM6010_REQ08_R16_A_AGC_GAIN_MAX 0x08, 0x16
-#define TM6010_REQ08_R17_A_AGC_GAIN_MIN 0x08, 0x17
-#define TM6010_REQ08_R18_A_TR_CTRL 0x08, 0x18
-#define TM6010_REQ08_R19_A_FH_2FH_GAIN 0x08, 0x19
-#define TM6010_REQ08_R1A_A_NICAM_SER_MAX 0x08, 0x1a
-#define TM6010_REQ08_R1B_A_NICAM_SER_MIN 0x08, 0x1b
-#define TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT 0x08, 0x1e
-#define TM6010_REQ08_R1F_A_TEST_INTF_SEL 0x08, 0x1f
-#define TM6010_REQ08_R20_A_TEST_PIN_SEL 0x08, 0x20
-#define TM6010_REQ08_R21_A_AGC_ERR 0x08, 0x21
-#define TM6010_REQ08_R22_A_AGC_GAIN 0x08, 0x22
-#define TM6010_REQ08_R23_A_NICAM_INFO 0x08, 0x23
-#define TM6010_REQ08_R24_A_SER 0x08, 0x24
-#define TM6010_REQ08_R25_A_C1_AMP 0x08, 0x25
-#define TM6010_REQ08_R26_A_C2_AMP 0x08, 0x26
-#define TM6010_REQ08_R27_A_NOISE_AMP 0x08, 0x27
-#define TM6010_REQ08_R28_A_AUDIO_MODE_RES 0x08, 0x28
-
-/* Define TM6010 Video ADC registers */
-#define TM6010_REQ08_RE0_ADC_REF 0x08, 0xe0
-#define TM6010_REQ08_RE1_DAC_CLMP 0x08, 0xe1
-#define TM6010_REQ08_RE2_POWER_DOWN_CTRL1 0x08, 0xe2
-#define TM6010_REQ08_RE3_ADC_IN1_SEL 0x08, 0xe3
-#define TM6010_REQ08_RE4_ADC_IN2_SEL 0x08, 0xe4
-#define TM6010_REQ08_RE5_GAIN_PARAM 0x08, 0xe5
-#define TM6010_REQ08_RE6_POWER_DOWN_CTRL2 0x08, 0xe6
-#define TM6010_REQ08_RE7_REG_GAIN_Y 0x08, 0xe7
-#define TM6010_REQ08_RE8_REG_GAIN_C 0x08, 0xe8
-#define TM6010_REQ08_RE9_BIAS_CTRL 0x08, 0xe9
-#define TM6010_REQ08_REA_BUFF_DRV_CTRL 0x08, 0xea
-#define TM6010_REQ08_REB_SIF_GAIN_CTRL 0x08, 0xeb
-#define TM6010_REQ08_REC_REVERSE_YC_CTRL 0x08, 0xec
-#define TM6010_REQ08_RED_GAIN_SEL 0x08, 0xed
-
-/* Define TM6010 Audio ADC registers */
-#define TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG 0x08, 0xf0
-#define TM6010_REQ08_RF1_AADC_POWER_DOWN 0x08, 0xf1
-#define TM6010_REQ08_RF2_LEFT_CHANNEL_VOL 0x08, 0xf2
-#define TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL 0x08, 0xf3
diff --git a/drivers/staging/tm6000/tm6000-stds.c b/drivers/staging/tm6000/tm6000-stds.c
deleted file mode 100644
index 8b29d73..0000000
--- a/drivers/staging/tm6000/tm6000-stds.c
+++ /dev/null
@@ -1,679 +0,0 @@
-/*
- * tm6000-stds.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2007 Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include "tm6000.h"
-#include "tm6000-regs.h"
-
-static unsigned int tm6010_a_mode = 0;
-module_param(tm6010_a_mode, int, 0644);
-MODULE_PARM_DESC(tm6010_a_mode, "set tm6010 sif audio mode");
-
-struct tm6000_reg_settings {
- unsigned char req;
- unsigned char reg;
- unsigned char value;
-};
-
-
-struct tm6000_std_settings {
- v4l2_std_id id;
- struct tm6000_reg_settings common[27];
-};
-
-static struct tm6000_std_settings composite_stds[] = {
- {
- .id = V4L2_STD_PAL_M,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x04},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x20},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_PAL_Nc,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x36},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_PAL,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x32},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_SECAM,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x38},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xFF},
-
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_NTSC,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- },
-};
-
-static struct tm6000_std_settings svideo_stds[] = {
- {
- .id = V4L2_STD_PAL_M,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x05},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_PAL_Nc,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x37},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_PAL,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x33},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_SECAM,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x39},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xFF},
-
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- }, {
- .id = V4L2_STD_NTSC,
- .common = {
- {TM6010_REQ07_R3F_RESET, 0x01},
- {TM6010_REQ07_R00_VIDEO_CONTROL0, 0x01},
- {TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f},
- {TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f},
- {TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03},
- {TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30},
- {TM6010_REQ07_R17_HLOOP_MAXSTATE, 0x8b},
- {TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e},
- {TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b},
- {TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2},
- {TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9},
- {TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c},
- {TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc},
- {TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc},
- {TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd},
- {TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88},
- {TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22},
- {TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61},
- {TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c},
- {TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c},
- {TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42},
- {TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6F},
-
- {TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd},
- {TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07},
- {TM6010_REQ07_R3F_RESET, 0x00},
- {0, 0, 0},
- },
- },
-};
-
-
-static int tm6000_set_audio_std(struct tm6000_core *dev)
-{
- uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */
- uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */
- uint8_t areg_06 = 0x02; /* Auto de-emphasis, mannual channel mode */
- uint8_t nicam_flag = 0; /* No NICAM */
-
- if (dev->radio) {
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04);
- tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80);
- tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c);
- /* set mono or stereo */
- if (dev->amode == V4L2_TUNER_MODE_MONO)
- tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00);
- else if (dev->amode == V4L2_TUNER_MODE_STEREO)
- tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x02);
- tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18);
- tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a);
- tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x40);
- tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe);
- tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
- return 0;
- }
-
- switch (tm6010_a_mode) {
- /* auto */
- case 0:
- switch (dev->norm) {
- case V4L2_STD_NTSC_M_KR:
- areg_05 |= 0x00;
- break;
- case V4L2_STD_NTSC_M_JP:
- areg_05 |= 0x40;
- break;
- case V4L2_STD_NTSC_M:
- case V4L2_STD_PAL_M:
- case V4L2_STD_PAL_N:
- areg_05 |= 0x20;
- break;
- case V4L2_STD_PAL_Nc:
- areg_05 |= 0x60;
- break;
- case V4L2_STD_SECAM_L:
- areg_05 |= 0x00;
- break;
- case V4L2_STD_DK:
- areg_05 |= 0x10;
- break;
- }
- break;
- /* A2 */
- case 1:
- switch (dev->norm) {
- case V4L2_STD_B:
- case V4L2_STD_GH:
- areg_05 = 0x05;
- break;
- case V4L2_STD_DK:
- areg_05 = 0x09;
- break;
- }
- break;
- /* NICAM */
- case 2:
- switch (dev->norm) {
- case V4L2_STD_B:
- case V4L2_STD_GH:
- areg_05 = 0x07;
- break;
- case V4L2_STD_DK:
- areg_05 = 0x06;
- break;
- case V4L2_STD_PAL_I:
- areg_05 = 0x08;
- break;
- case V4L2_STD_SECAM_L:
- areg_05 = 0x0a;
- areg_02 = 0x02;
- break;
- }
- nicam_flag = 1;
- break;
- /* other */
- case 3:
- switch (dev->norm) {
- /* DK3_A2 */
- case V4L2_STD_DK:
- areg_05 = 0x0b;
- break;
- /* Korea */
- case V4L2_STD_NTSC_M_KR:
- areg_05 = 0x04;
- break;
- /* EIAJ */
- case V4L2_STD_NTSC_M_JP:
- areg_05 = 0x03;
- break;
- default:
- areg_05 = 0x02;
- break;
- }
- break;
- }
-
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, areg_02);
- tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0xa0);
- tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, areg_05);
- tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, areg_06);
- tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x08);
- tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91);
- tm6000_set_reg(dev, TM6010_REQ08_R0B_A_ASD_THRES1, 0x20);
- tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x12);
- tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x20);
- tm6000_set_reg(dev, TM6010_REQ08_R0E_A_MONO_THRES1, 0xf0);
- tm6000_set_reg(dev, TM6010_REQ08_R0F_A_MONO_THRES2, 0x80);
- tm6000_set_reg(dev, TM6010_REQ08_R10_A_MUTE_THRES1, 0xc0);
- tm6000_set_reg(dev, TM6010_REQ08_R11_A_MUTE_THRES2, 0x80);
- tm6000_set_reg(dev, TM6010_REQ08_R12_A_AGC_U, 0x12);
- tm6000_set_reg(dev, TM6010_REQ08_R13_A_AGC_ERR_T, 0xfe);
- tm6000_set_reg(dev, TM6010_REQ08_R14_A_AGC_GAIN_INIT, 0x20);
- tm6000_set_reg(dev, TM6010_REQ08_R15_A_AGC_STEP_THR, 0x14);
- tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe);
- tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01);
- tm6000_set_reg(dev, TM6010_REQ08_R18_A_TR_CTRL, 0xa0);
- tm6000_set_reg(dev, TM6010_REQ08_R19_A_FH_2FH_GAIN, 0x32);
- tm6000_set_reg(dev, TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64);
- tm6000_set_reg(dev, TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20);
- tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1c, 0x00);
- tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1d, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
- tm6000_set_reg(dev, TM6010_REQ08_R1F_A_TEST_INTF_SEL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R20_A_TEST_PIN_SEL, 0x00);
- tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
-
- return 0;
-}
-
-void tm6000_get_std_res(struct tm6000_core *dev)
-{
- /* Currently, those are the only supported resoltions */
- if (dev->norm & V4L2_STD_525_60)
- dev->height = 480;
- else
- dev->height = 576;
-
- dev->width = 720;
-}
-
-static int tm6000_load_std(struct tm6000_core *dev,
- struct tm6000_reg_settings *set, int max_size)
-{
- int i, rc;
-
- /* Load board's initialization table */
- for (i = 0; max_size; i++) {
- if (!set[i].req)
- return 0;
-
- rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value);
- if (rc < 0) {
- printk(KERN_ERR "Error %i while setting "
- "req %d, reg %d to value %d\n",
- rc, set[i].req, set[i].reg, set[i].value);
- return rc;
- }
- }
-
- return 0;
-}
-
-int tm6000_set_standard(struct tm6000_core *dev)
-{
- int i, rc = 0;
- u8 reg_07_fe = 0x8a;
- u8 reg_08_f1 = 0xfc;
- u8 reg_08_e2 = 0xf0;
- u8 reg_08_e6 = 0x0f;
-
- tm6000_get_std_res(dev);
-
- if (dev->radio) {
- /* todo */
- }
-
- if (dev->dev_type == TM6010) {
- switch (dev->vinput[dev->input].vmux) {
- case TM6000_VMUX_VIDEO_A:
- tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4);
- tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
- tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
- tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
- tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
- reg_07_fe |= 0x01;
- break;
- case TM6000_VMUX_VIDEO_B:
- tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf8);
- tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
- tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
- tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
- tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
- reg_07_fe |= 0x01;
- break;
- case TM6000_VMUX_VIDEO_AB:
- tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xfc);
- tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8);
- reg_08_e6 = 0x00;
- tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2);
- tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0);
- tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
- tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe0);
- break;
- default:
- break;
- }
- switch (dev->vinput[dev->input].amux) {
- case TM6000_AMUX_ADC1:
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x00, 0x0f);
- break;
- case TM6000_AMUX_ADC2:
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x08, 0x0f);
- break;
- case TM6000_AMUX_SIF1:
- reg_08_e2 |= 0x02;
- reg_08_e6 = 0x08;
- reg_07_fe |= 0x40;
- reg_08_f1 |= 0x02;
- tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf3);
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x02, 0x0f);
- break;
- case TM6000_AMUX_SIF2:
- reg_08_e2 |= 0x02;
- reg_08_e6 = 0x08;
- reg_07_fe |= 0x40;
- reg_08_f1 |= 0x02;
- tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf7);
- tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
- 0x02, 0x0f);
- break;
- default:
- break;
- }
- tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, reg_08_e2);
- tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, reg_08_e6);
- tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, reg_08_f1);
- tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, reg_07_fe);
- } else {
- switch (dev->vinput[dev->input].vmux) {
- case TM6000_VMUX_VIDEO_A:
- tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
- tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
- tm6000_set_reg(dev,
- REQ_03_SET_GET_MCU_PIN, dev->vinput[dev->input].v_gpio, 0);
- break;
- case TM6000_VMUX_VIDEO_B:
- tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x00);
- tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
- tm6000_set_reg(dev,
- REQ_03_SET_GET_MCU_PIN, dev->vinput[dev->input].v_gpio, 0);
- break;
- case TM6000_VMUX_VIDEO_AB:
- tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
- tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x10);
- tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00);
- tm6000_set_reg(dev,
- REQ_03_SET_GET_MCU_PIN, dev->vinput[dev->input].v_gpio, 1);
- break;
- default:
- break;
- }
- switch (dev->vinput[dev->input].amux) {
- case TM6000_AMUX_ADC1:
- tm6000_set_reg_mask(dev,
- TM6000_REQ07_REB_VADC_AADC_MODE, 0x00, 0x0f);
- break;
- case TM6000_AMUX_ADC2:
- tm6000_set_reg_mask(dev,
- TM6000_REQ07_REB_VADC_AADC_MODE, 0x04, 0x0f);
- break;
- default:
- break;
- }
- }
- if (dev->vinput[dev->input].type == TM6000_INPUT_SVIDEO) {
- for (i = 0; i < ARRAY_SIZE(svideo_stds); i++) {
- if (dev->norm & svideo_stds[i].id) {
- rc = tm6000_load_std(dev, svideo_stds[i].common,
- sizeof(svideo_stds[i].
- common));
- goto ret;
- }
- }
- return -EINVAL;
- } else {
- for (i = 0; i < ARRAY_SIZE(composite_stds); i++) {
- if (dev->norm & composite_stds[i].id) {
- rc = tm6000_load_std(dev,
- composite_stds[i].common,
- sizeof(composite_stds[i].
- common));
- goto ret;
- }
- }
- return -EINVAL;
- }
-
-ret:
- if (rc < 0)
- return rc;
-
- if ((dev->dev_type == TM6010) &&
- ((dev->vinput[dev->input].amux == TM6000_AMUX_SIF1) ||
- (dev->vinput[dev->input].amux == TM6000_AMUX_SIF2)))
- tm6000_set_audio_std(dev);
-
- msleep(40);
-
-
- return 0;
-}
diff --git a/drivers/staging/tm6000/tm6000-usb-isoc.h b/drivers/staging/tm6000/tm6000-usb-isoc.h
deleted file mode 100644
index 084c2a8..0000000
--- a/drivers/staging/tm6000/tm6000-usb-isoc.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * tm6000-buf.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/videodev2.h>
-
-#define TM6000_URB_MSG_LEN 180
-
-struct usb_isoc_ctl {
- /* max packet size of isoc transaction */
- int max_pkt_size;
-
- /* number of allocated urbs */
- int num_bufs;
-
- /* urb for isoc transfers */
- struct urb **urb;
-
- /* transfer buffers for isoc transfer */
- char **transfer_buffer;
-
- /* Last buffer command and region */
- u8 cmd;
- int pos, size, pktsize;
-
- /* Last field: ODD or EVEN? */
- int vfield, field;
-
- /* Stores incomplete commands */
- u32 tmp_buf;
- int tmp_buf_len;
-
- /* Stores already requested buffers */
- struct tm6000_buffer *buf;
-};
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
deleted file mode 100644
index 8d8b939..0000000
--- a/drivers/staging/tm6000/tm6000-video.c
+++ /dev/null
@@ -1,1809 +0,0 @@
-/*
- * tm6000-video.c - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- * - Fixed module load/unload
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/random.h>
-#include <linux/usb.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-ioctl.h>
-#include <media/tuner.h>
-#include <linux/interrupt.h>
-#include <linux/kthread.h>
-#include <linux/highmem.h>
-#include <linux/freezer.h>
-
-#include "tm6000-regs.h"
-#include "tm6000.h"
-
-#define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
-
-/* Limits minimum and default number of buffers */
-#define TM6000_MIN_BUF 4
-#define TM6000_DEF_BUF 8
-
-#define TM6000_MAX_ISO_PACKETS 46 /* Max number of ISO packets */
-
-/* Declare static vars that will be used as parameters */
-static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
-static int video_nr = -1; /* /dev/videoN, -1 for autodetect */
-static int radio_nr = -1; /* /dev/radioN, -1 for autodetect */
-
-/* Debug level */
-int tm6000_debug;
-EXPORT_SYMBOL_GPL(tm6000_debug);
-
-static const struct v4l2_queryctrl no_ctrl = {
- .name = "42",
- .flags = V4L2_CTRL_FLAG_DISABLED,
-};
-
-/* supported controls */
-static struct v4l2_queryctrl tm6000_qctrl[] = {
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
- .maximum = 255,
- .step = 1,
- .default_value = 54,
- .flags = 0,
- }, {
- .id = V4L2_CID_CONTRAST,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Contrast",
- .minimum = 0,
- .maximum = 255,
- .step = 0x1,
- .default_value = 119,
- .flags = 0,
- }, {
- .id = V4L2_CID_SATURATION,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Saturation",
- .minimum = 0,
- .maximum = 255,
- .step = 0x1,
- .default_value = 112,
- .flags = 0,
- }, {
- .id = V4L2_CID_HUE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Hue",
- .minimum = -128,
- .maximum = 127,
- .step = 0x1,
- .default_value = 0,
- .flags = 0,
- },
- /* --- audio --- */
- {
- .id = V4L2_CID_AUDIO_MUTE,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- }, {
- .id = V4L2_CID_AUDIO_VOLUME,
- .name = "Volume",
- .minimum = -15,
- .maximum = 15,
- .step = 1,
- .default_value = 0,
- .type = V4L2_CTRL_TYPE_INTEGER,
- }
-};
-
-static const unsigned int CTRLS = ARRAY_SIZE(tm6000_qctrl);
-static int qctl_regs[ARRAY_SIZE(tm6000_qctrl)];
-
-static struct tm6000_fmt format[] = {
- {
- .name = "4:2:2, packed, YVY2",
- .fourcc = V4L2_PIX_FMT_YUYV,
- .depth = 16,
- }, {
- .name = "4:2:2, packed, UYVY",
- .fourcc = V4L2_PIX_FMT_UYVY,
- .depth = 16,
- }, {
- .name = "A/V + VBI mux packet",
- .fourcc = V4L2_PIX_FMT_TM6000,
- .depth = 16,
- }
-};
-
-static const struct v4l2_queryctrl *ctrl_by_id(unsigned int id)
-{
- unsigned int i;
-
- for (i = 0; i < CTRLS; i++)
- if (tm6000_qctrl[i].id == id)
- return tm6000_qctrl+i;
- return NULL;
-}
-
-/* ------------------------------------------------------------------
- * DMA and thread functions
- * ------------------------------------------------------------------
- */
-
-#define norm_maxw(a) 720
-#define norm_maxh(a) 576
-
-#define norm_minw(a) norm_maxw(a)
-#define norm_minh(a) norm_maxh(a)
-
-/*
- * video-buf generic routine to get the next available buffer
- */
-static inline void get_next_buf(struct tm6000_dmaqueue *dma_q,
- struct tm6000_buffer **buf)
-{
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- char *outp;
-
- if (list_empty(&dma_q->active)) {
- dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n");
- *buf = NULL;
- return;
- }
-
- *buf = list_entry(dma_q->active.next,
- struct tm6000_buffer, vb.queue);
-
- /* Cleans up buffer - Useful for testing for frame/URB loss */
- outp = videobuf_to_vmalloc(&(*buf)->vb);
-
- return;
-}
-
-/*
- * Announces that a buffer were filled and request the next
- */
-static inline void buffer_filled(struct tm6000_core *dev,
- struct tm6000_dmaqueue *dma_q,
- struct tm6000_buffer *buf)
-{
- /* Advice that buffer was filled */
- dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i);
- buf->vb.state = VIDEOBUF_DONE;
- buf->vb.field_count++;
- do_gettimeofday(&buf->vb.ts);
-
- list_del(&buf->vb.queue);
- wake_up(&buf->vb.done);
-}
-
-const char *tm6000_msg_type[] = {
- "unknown(0)", /* 0 */
- "video", /* 1 */
- "audio", /* 2 */
- "vbi", /* 3 */
- "pts", /* 4 */
- "err", /* 5 */
- "unknown(6)", /* 6 */
- "unknown(7)", /* 7 */
-};
-
-/*
- * Identify the tm5600/6000 buffer header type and properly handles
- */
-static int copy_streams(u8 *data, unsigned long len,
- struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- u8 *ptr = data, *endp = data+len, c;
- unsigned long header = 0;
- int rc = 0;
- unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0;
- struct tm6000_buffer *vbuf = NULL;
- char *voutp = NULL;
- unsigned int linewidth;
-
- if (!dev->radio) {
- /* get video buffer */
- get_next_buf(dma_q, &vbuf);
-
- if (!vbuf)
- return rc;
- voutp = videobuf_to_vmalloc(&vbuf->vb);
-
- if (!voutp)
- return 0;
- }
-
- for (ptr = data; ptr < endp;) {
- if (!dev->isoc_ctl.cmd) {
- /* Header */
- if (dev->isoc_ctl.tmp_buf_len > 0) {
- /* from last urb or packet */
- header = dev->isoc_ctl.tmp_buf;
- if (4 - dev->isoc_ctl.tmp_buf_len > 0) {
- memcpy((u8 *)&header +
- dev->isoc_ctl.tmp_buf_len,
- ptr,
- 4 - dev->isoc_ctl.tmp_buf_len);
- ptr += 4 - dev->isoc_ctl.tmp_buf_len;
- }
- dev->isoc_ctl.tmp_buf_len = 0;
- } else {
- if (ptr + 3 >= endp) {
- /* have incomplete header */
- dev->isoc_ctl.tmp_buf_len = endp - ptr;
- memcpy(&dev->isoc_ctl.tmp_buf, ptr,
- dev->isoc_ctl.tmp_buf_len);
- return rc;
- }
- /* Seek for sync */
- for (; ptr < endp - 3; ptr++) {
- if (*(ptr + 3) == 0x47)
- break;
- }
- /* Get message header */
- header = *(unsigned long *)ptr;
- ptr += 4;
- }
-
- /* split the header fields */
- c = (header >> 24) & 0xff;
- size = ((header & 0x7e) << 1);
- if (size > 0)
- size -= 4;
- block = (header >> 7) & 0xf;
- field = (header >> 11) & 0x1;
- line = (header >> 12) & 0x1ff;
- cmd = (header >> 21) & 0x7;
- /* Validates haeder fields */
- if (size > TM6000_URB_MSG_LEN)
- size = TM6000_URB_MSG_LEN;
- pktsize = TM6000_URB_MSG_LEN;
- /* calculate position in buffer
- * and change the buffer
- */
- switch (cmd) {
- case TM6000_URB_MSG_VIDEO:
- if (!dev->radio) {
- if ((dev->isoc_ctl.vfield != field) &&
- (field == 1)) {
- /* Announces that a new buffer
- * were filled
- */
- buffer_filled(dev, dma_q, vbuf);
- dprintk(dev, V4L2_DEBUG_ISOC,
- "new buffer filled\n");
- get_next_buf(dma_q, &vbuf);
- if (!vbuf)
- return rc;
- voutp = videobuf_to_vmalloc(&vbuf->vb);
- if (!voutp)
- return rc;
- memset(voutp, 0, vbuf->vb.size);
- }
- linewidth = vbuf->vb.width << 1;
- pos = ((line << 1) - field - 1) *
- linewidth + block * TM6000_URB_MSG_LEN;
- /* Don't allow to write out of the buffer */
- if (pos + size > vbuf->vb.size)
- cmd = TM6000_URB_MSG_ERR;
- dev->isoc_ctl.vfield = field;
- }
- break;
- case TM6000_URB_MSG_VBI:
- break;
- case TM6000_URB_MSG_AUDIO:
- case TM6000_URB_MSG_PTS:
- size = pktsize; /* Size is always 180 bytes */
- break;
- }
- } else {
- /* Continue the last copy */
- cmd = dev->isoc_ctl.cmd;
- size = dev->isoc_ctl.size;
- pos = dev->isoc_ctl.pos;
- pktsize = dev->isoc_ctl.pktsize;
- field = dev->isoc_ctl.field;
- }
- cpysize = (endp - ptr > size) ? size : endp - ptr;
- if (cpysize) {
- /* copy data in different buffers */
- switch (cmd) {
- case TM6000_URB_MSG_VIDEO:
- /* Fills video buffer */
- if (vbuf)
- memcpy(&voutp[pos], ptr, cpysize);
- break;
- case TM6000_URB_MSG_AUDIO: {
- int i;
- for (i = 0; i < cpysize; i += 2)
- swab16s((u16 *)(ptr + i));
-
- tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize);
- break;
- }
- case TM6000_URB_MSG_VBI:
- /* Need some code to copy vbi buffer */
- break;
- case TM6000_URB_MSG_PTS: {
- /* Need some code to copy pts */
- u32 pts;
- pts = *(u32 *)ptr;
- dprintk(dev, V4L2_DEBUG_ISOC, "field %d, PTS %x",
- field, pts);
- break;
- }
- }
- }
- if (ptr + pktsize > endp) {
- /* End of URB packet, but cmd processing is not
- * complete. Preserve the state for a next packet
- */
- dev->isoc_ctl.pos = pos + cpysize;
- dev->isoc_ctl.size = size - cpysize;
- dev->isoc_ctl.cmd = cmd;
- dev->isoc_ctl.field = field;
- dev->isoc_ctl.pktsize = pktsize - (endp - ptr);
- ptr += endp - ptr;
- } else {
- dev->isoc_ctl.cmd = 0;
- ptr += pktsize;
- }
- }
- return 0;
-}
-
-/*
- * Identify the tm5600/6000 buffer header type and properly handles
- */
-static int copy_multiplexed(u8 *ptr, unsigned long len,
- struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- unsigned int pos = dev->isoc_ctl.pos, cpysize;
- int rc = 1;
- struct tm6000_buffer *buf;
- char *outp = NULL;
-
- get_next_buf(dma_q, &buf);
- if (buf)
- outp = videobuf_to_vmalloc(&buf->vb);
-
- if (!outp)
- return 0;
-
- while (len > 0) {
- cpysize = min(len, buf->vb.size-pos);
- memcpy(&outp[pos], ptr, cpysize);
- pos += cpysize;
- ptr += cpysize;
- len -= cpysize;
- if (pos >= buf->vb.size) {
- pos = 0;
- /* Announces that a new buffer were filled */
- buffer_filled(dev, dma_q, buf);
- dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n");
- get_next_buf(dma_q, &buf);
- if (!buf)
- break;
- outp = videobuf_to_vmalloc(&(buf->vb));
- if (!outp)
- return rc;
- pos = 0;
- }
- }
-
- dev->isoc_ctl.pos = pos;
- return rc;
-}
-
-static inline void print_err_status(struct tm6000_core *dev,
- int packet, int status)
-{
- char *errmsg = "Unknown";
-
- switch (status) {
- case -ENOENT:
- errmsg = "unlinked synchronuously";
- break;
- case -ECONNRESET:
- errmsg = "unlinked asynchronuously";
- break;
- case -ENOSR:
- errmsg = "Buffer error (overrun)";
- break;
- case -EPIPE:
- errmsg = "Stalled (device not responding)";
- break;
- case -EOVERFLOW:
- errmsg = "Babble (bad cable?)";
- break;
- case -EPROTO:
- errmsg = "Bit-stuff error (bad cable?)";
- break;
- case -EILSEQ:
- errmsg = "CRC/Timeout (could be anything)";
- break;
- case -ETIME:
- errmsg = "Device does not respond";
- break;
- }
- if (packet < 0) {
- dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n",
- status, errmsg);
- } else {
- dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n",
- packet, status, errmsg);
- }
-}
-
-
-/*
- * Controls the isoc copy of each urb packet
- */
-static inline int tm6000_isoc_copy(struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- int i, len = 0, rc = 1, status;
- char *p;
-
- if (urb->status < 0) {
- print_err_status(dev, -1, urb->status);
- return 0;
- }
-
- for (i = 0; i < urb->number_of_packets; i++) {
- status = urb->iso_frame_desc[i].status;
-
- if (status < 0) {
- print_err_status(dev, i, status);
- continue;
- }
-
- len = urb->iso_frame_desc[i].actual_length;
-
- if (len > 0) {
- p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
- if (!urb->iso_frame_desc[i].status) {
- if ((dev->fourcc) == V4L2_PIX_FMT_TM6000) {
- rc = copy_multiplexed(p, len, urb);
- if (rc <= 0)
- return rc;
- } else {
- copy_streams(p, len, urb);
- }
- }
- }
- }
- return rc;
-}
-
-/* ------------------------------------------------------------------
- * URB control
- * ------------------------------------------------------------------
- */
-
-/*
- * IRQ callback, called by URB callback
- */
-static void tm6000_irq_callback(struct urb *urb)
-{
- struct tm6000_dmaqueue *dma_q = urb->context;
- struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
- int i;
-
- if (!dev)
- return;
-
- spin_lock(&dev->slock);
- tm6000_isoc_copy(urb);
- spin_unlock(&dev->slock);
-
- /* Reset urb buffers */
- for (i = 0; i < urb->number_of_packets; i++) {
- urb->iso_frame_desc[i].status = 0;
- urb->iso_frame_desc[i].actual_length = 0;
- }
-
- urb->status = usb_submit_urb(urb, GFP_ATOMIC);
- if (urb->status)
- tm6000_err("urb resubmit failed (error=%i)\n",
- urb->status);
-}
-
-/*
- * Stop and Deallocate URBs
- */
-static void tm6000_uninit_isoc(struct tm6000_core *dev)
-{
- struct urb *urb;
- int i;
-
- dev->isoc_ctl.buf = NULL;
- for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
- urb = dev->isoc_ctl.urb[i];
- if (urb) {
- usb_kill_urb(urb);
- usb_unlink_urb(urb);
- if (dev->isoc_ctl.transfer_buffer[i]) {
- usb_free_coherent(dev->udev,
- urb->transfer_buffer_length,
- dev->isoc_ctl.transfer_buffer[i],
- urb->transfer_dma);
- }
- usb_free_urb(urb);
- dev->isoc_ctl.urb[i] = NULL;
- }
- dev->isoc_ctl.transfer_buffer[i] = NULL;
- }
-
- kfree(dev->isoc_ctl.urb);
- kfree(dev->isoc_ctl.transfer_buffer);
-
- dev->isoc_ctl.urb = NULL;
- dev->isoc_ctl.transfer_buffer = NULL;
- dev->isoc_ctl.num_bufs = 0;
-}
-
-/*
- * Allocate URBs and start IRQ
- */
-static int tm6000_prepare_isoc(struct tm6000_core *dev)
-{
- struct tm6000_dmaqueue *dma_q = &dev->vidq;
- int i, j, sb_size, pipe, size, max_packets, num_bufs = 8;
- struct urb *urb;
-
- /* De-allocates all pending stuff */
- tm6000_uninit_isoc(dev);
- /* Stop interrupt USB pipe */
- tm6000_ir_int_stop(dev);
-
- usb_set_interface(dev->udev,
- dev->isoc_in.bInterfaceNumber,
- dev->isoc_in.bAlternateSetting);
-
- /* Start interrupt USB pipe */
- tm6000_ir_int_start(dev);
-
- pipe = usb_rcvisocpipe(dev->udev,
- dev->isoc_in.endp->desc.bEndpointAddress &
- USB_ENDPOINT_NUMBER_MASK);
-
- size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
-
- if (size > dev->isoc_in.maxsize)
- size = dev->isoc_in.maxsize;
-
- dev->isoc_ctl.max_pkt_size = size;
-
- max_packets = TM6000_MAX_ISO_PACKETS;
- sb_size = max_packets * size;
-
- dev->isoc_ctl.num_bufs = num_bufs;
-
- dev->isoc_ctl.urb = kmalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
- if (!dev->isoc_ctl.urb) {
- tm6000_err("cannot alloc memory for usb buffers\n");
- return -ENOMEM;
- }
-
- dev->isoc_ctl.transfer_buffer = kmalloc(sizeof(void *)*num_bufs,
- GFP_KERNEL);
- if (!dev->isoc_ctl.transfer_buffer) {
- tm6000_err("cannot allocate memory for usbtransfer\n");
- kfree(dev->isoc_ctl.urb);
- return -ENOMEM;
- }
-
- dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets"
- " (%d bytes) of %d bytes each to handle %u size\n",
- max_packets, num_bufs, sb_size,
- dev->isoc_in.maxsize, size);
-
- /* allocate urbs and transfer buffers */
- for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
- urb = usb_alloc_urb(max_packets, GFP_KERNEL);
- if (!urb) {
- tm6000_err("cannot alloc isoc_ctl.urb %i\n", i);
- tm6000_uninit_isoc(dev);
- usb_free_urb(urb);
- return -ENOMEM;
- }
- dev->isoc_ctl.urb[i] = urb;
-
- dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev,
- sb_size, GFP_KERNEL, &urb->transfer_dma);
- if (!dev->isoc_ctl.transfer_buffer[i]) {
- tm6000_err("unable to allocate %i bytes for transfer"
- " buffer %i%s\n",
- sb_size, i,
- in_interrupt() ? " while in int" : "");
- tm6000_uninit_isoc(dev);
- return -ENOMEM;
- }
- memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
-
- usb_fill_bulk_urb(urb, dev->udev, pipe,
- dev->isoc_ctl.transfer_buffer[i], sb_size,
- tm6000_irq_callback, dma_q);
- urb->interval = dev->isoc_in.endp->desc.bInterval;
- urb->number_of_packets = max_packets;
- urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
-
- for (j = 0; j < max_packets; j++) {
- urb->iso_frame_desc[j].offset = size * j;
- urb->iso_frame_desc[j].length = size;
- }
- }
-
- return 0;
-}
-
-static int tm6000_start_thread(struct tm6000_core *dev)
-{
- struct tm6000_dmaqueue *dma_q = &dev->vidq;
- int i;
-
- dma_q->frame = 0;
- dma_q->ini_jiffies = jiffies;
-
- init_waitqueue_head(&dma_q->wq);
-
- /* submit urbs and enables IRQ */
- for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
- int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
- if (rc) {
- tm6000_err("submit of urb %i failed (error=%i)\n", i,
- rc);
- tm6000_uninit_isoc(dev);
- return rc;
- }
- }
-
- return 0;
-}
-
-/* ------------------------------------------------------------------
- * Videobuf operations
- * ------------------------------------------------------------------
- */
-
-static int
-buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
-{
- struct tm6000_fh *fh = vq->priv_data;
-
- *size = fh->fmt->depth * fh->width * fh->height >> 3;
- if (0 == *count)
- *count = TM6000_DEF_BUF;
-
- if (*count < TM6000_MIN_BUF)
- *count = TM6000_MIN_BUF;
-
- while (*size * *count > vid_limit * 1024 * 1024)
- (*count)--;
-
- return 0;
-}
-
-static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf)
-{
- struct tm6000_fh *fh = vq->priv_data;
- struct tm6000_core *dev = fh->dev;
- unsigned long flags;
-
- if (in_interrupt())
- BUG();
-
- /* We used to wait for the buffer to finish here, but this didn't work
- because, as we were keeping the state as VIDEOBUF_QUEUED,
- videobuf_queue_cancel marked it as finished for us.
- (Also, it could wedge forever if the hardware was misconfigured.)
-
- This should be safe; by the time we get here, the buffer isn't
- queued anymore. If we ever start marking the buffers as
- VIDEOBUF_ACTIVE, it won't be, though.
- */
- spin_lock_irqsave(&dev->slock, flags);
- if (dev->isoc_ctl.buf == buf)
- dev->isoc_ctl.buf = NULL;
- spin_unlock_irqrestore(&dev->slock, flags);
-
- videobuf_vmalloc_free(&buf->vb);
- buf->vb.state = VIDEOBUF_NEEDS_INIT;
-}
-
-static int
-buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
- enum v4l2_field field)
-{
- struct tm6000_fh *fh = vq->priv_data;
- struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
- struct tm6000_core *dev = fh->dev;
- int rc = 0, urb_init = 0;
-
- BUG_ON(NULL == fh->fmt);
-
-
- /* FIXME: It assumes depth=2 */
- /* The only currently supported format is 16 bits/pixel */
- buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3;
- if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
- return -EINVAL;
-
- if (buf->fmt != fh->fmt ||
- buf->vb.width != fh->width ||
- buf->vb.height != fh->height ||
- buf->vb.field != field) {
- buf->fmt = fh->fmt;
- buf->vb.width = fh->width;
- buf->vb.height = fh->height;
- buf->vb.field = field;
- buf->vb.state = VIDEOBUF_NEEDS_INIT;
- }
-
- if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
- rc = videobuf_iolock(vq, &buf->vb, NULL);
- if (rc != 0)
- goto fail;
- urb_init = 1;
- }
-
- if (!dev->isoc_ctl.num_bufs)
- urb_init = 1;
-
- if (urb_init) {
- rc = tm6000_prepare_isoc(dev);
- if (rc < 0)
- goto fail;
-
- rc = tm6000_start_thread(dev);
- if (rc < 0)
- goto fail;
-
- }
-
- buf->vb.state = VIDEOBUF_PREPARED;
- return 0;
-
-fail:
- free_buffer(vq, buf);
- return rc;
-}
-
-static void
-buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
- struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
- struct tm6000_fh *fh = vq->priv_data;
- struct tm6000_core *dev = fh->dev;
- struct tm6000_dmaqueue *vidq = &dev->vidq;
-
- buf->vb.state = VIDEOBUF_QUEUED;
- list_add_tail(&buf->vb.queue, &vidq->active);
-}
-
-static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
- struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
-
- free_buffer(vq, buf);
-}
-
-static struct videobuf_queue_ops tm6000_video_qops = {
- .buf_setup = buffer_setup,
- .buf_prepare = buffer_prepare,
- .buf_queue = buffer_queue,
- .buf_release = buffer_release,
-};
-
-/* ------------------------------------------------------------------
- * IOCTL handling
- * ------------------------------------------------------------------
- */
-
-static bool is_res_read(struct tm6000_core *dev, struct tm6000_fh *fh)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources == fh && dev->is_res_read)
- return true;
-
- return false;
-}
-
-static bool is_res_streaming(struct tm6000_core *dev, struct tm6000_fh *fh)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources == fh)
- return true;
-
- return false;
-}
-
-static bool res_get(struct tm6000_core *dev, struct tm6000_fh *fh,
- bool is_res_read)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources == fh && dev->is_res_read == is_res_read)
- return true;
-
- /* is it free? */
- if (dev->resources)
- return false;
-
- /* grab it */
- dev->resources = fh;
- dev->is_res_read = is_res_read;
- dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n");
- return true;
-}
-
-static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh)
-{
- /* Is the current fh handling it? if so, that's OK */
- if (dev->resources != fh)
- return;
-
- dev->resources = NULL;
- dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n");
-}
-
-/* ------------------------------------------------------------------
- * IOCTL vidioc handling
- * ------------------------------------------------------------------
- */
-static int vidioc_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
-
- strlcpy(cap->driver, "tm6000", sizeof(cap->driver));
- strlcpy(cap->card, "Trident TVMaster TM5600/6000/6010", sizeof(cap->card));
- cap->version = TM6000_VERSION;
- cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
- V4L2_CAP_STREAMING |
- V4L2_CAP_AUDIO |
- V4L2_CAP_READWRITE;
-
- if (dev->tuner_type != TUNER_ABSENT)
- cap->capabilities |= V4L2_CAP_TUNER;
-
- return 0;
-}
-
-static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
-{
- if (unlikely(f->index >= ARRAY_SIZE(format)))
- return -EINVAL;
-
- strlcpy(f->description, format[f->index].name, sizeof(f->description));
- f->pixelformat = format[f->index].fourcc;
- return 0;
-}
-
-static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct tm6000_fh *fh = priv;
-
- f->fmt.pix.width = fh->width;
- f->fmt.pix.height = fh->height;
- f->fmt.pix.field = fh->vb_vidq.field;
- f->fmt.pix.pixelformat = fh->fmt->fourcc;
- f->fmt.pix.bytesperline =
- (f->fmt.pix.width * fh->fmt->depth) >> 3;
- f->fmt.pix.sizeimage =
- f->fmt.pix.height * f->fmt.pix.bytesperline;
-
- return 0;
-}
-
-static struct tm6000_fmt *format_by_fourcc(unsigned int fourcc)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(format); i++)
- if (format[i].fourcc == fourcc)
- return format+i;
- return NULL;
-}
-
-static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
- struct tm6000_fmt *fmt;
- enum v4l2_field field;
-
- fmt = format_by_fourcc(f->fmt.pix.pixelformat);
- if (NULL == fmt) {
- dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Fourcc format (0x%08x)"
- " invalid.\n", f->fmt.pix.pixelformat);
- return -EINVAL;
- }
-
- field = f->fmt.pix.field;
-
- if (field == V4L2_FIELD_ANY)
- field = V4L2_FIELD_SEQ_TB;
- else if (V4L2_FIELD_INTERLACED != field) {
- dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Field type invalid.\n");
- return -EINVAL;
- }
-
- tm6000_get_std_res(dev);
-
- f->fmt.pix.width = dev->width;
- f->fmt.pix.height = dev->height;
-
- f->fmt.pix.width &= ~0x01;
-
- f->fmt.pix.field = field;
-
- f->fmt.pix.bytesperline =
- (f->fmt.pix.width * fmt->depth) >> 3;
- f->fmt.pix.sizeimage =
- f->fmt.pix.height * f->fmt.pix.bytesperline;
-
- return 0;
-}
-
-/*FIXME: This seems to be generic enough to be at videodev2 */
-static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- int ret = vidioc_try_fmt_vid_cap(file, fh, f);
- if (ret < 0)
- return ret;
-
- fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
- fh->width = f->fmt.pix.width;
- fh->height = f->fmt.pix.height;
- fh->vb_vidq.field = f->fmt.pix.field;
- fh->type = f->type;
-
- dev->fourcc = f->fmt.pix.pixelformat;
-
- tm6000_set_fourcc_format(dev);
-
- return 0;
-}
-
-static int vidioc_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_reqbufs(&fh->vb_vidq, p);
-}
-
-static int vidioc_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_querybuf(&fh->vb_vidq, p);
-}
-
-static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_qbuf(&fh->vb_vidq, p);
-}
-
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
- struct tm6000_fh *fh = priv;
-
- return videobuf_dqbuf(&fh->vb_vidq, p,
- file->f_flags & O_NONBLOCK);
-}
-
-static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
- if (i != fh->type)
- return -EINVAL;
-
- if (!res_get(dev, fh, false))
- return -EBUSY;
- return videobuf_streamon(&fh->vb_vidq);
-}
-
-static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
- if (i != fh->type)
- return -EINVAL;
-
- videobuf_streamoff(&fh->vb_vidq);
- res_free(dev, fh);
-
- return 0;
-}
-
-static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
-{
- int rc = 0;
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- dev->norm = *norm;
- rc = tm6000_init_analog_mode(dev);
-
- fh->width = dev->width;
- fh->height = dev->height;
-
- if (rc < 0)
- return rc;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
-
- return 0;
-}
-
-static const char *iname[] = {
- [TM6000_INPUT_TV] = "Television",
- [TM6000_INPUT_COMPOSITE1] = "Composite 1",
- [TM6000_INPUT_COMPOSITE2] = "Composite 2",
- [TM6000_INPUT_SVIDEO] = "S-Video",
-};
-
-static int vidioc_enum_input(struct file *file, void *priv,
- struct v4l2_input *i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- unsigned int n;
-
- n = i->index;
- if (n >= 3)
- return -EINVAL;
-
- if (!dev->vinput[n].type)
- return -EINVAL;
-
- i->index = n;
-
- if (dev->vinput[n].type == TM6000_INPUT_TV)
- i->type = V4L2_INPUT_TYPE_TUNER;
- else
- i->type = V4L2_INPUT_TYPE_CAMERA;
-
- strcpy(i->name, iname[dev->vinput[n].type]);
-
- i->std = TM6000_STD;
-
- return 0;
-}
-
-static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- *i = dev->input;
-
- return 0;
-}
-
-static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- int rc = 0;
-
- if (i >= 3)
- return -EINVAL;
- if (!dev->vinput[i].type)
- return -EINVAL;
-
- dev->input = i;
-
- rc = vidioc_s_std(file, priv, &dev->vfd->current_norm);
-
- return rc;
-}
-
-/* --- controls ---------------------------------------------- */
-static int vidioc_queryctrl(struct file *file, void *priv,
- struct v4l2_queryctrl *qc)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++)
- if (qc->id && qc->id == tm6000_qctrl[i].id) {
- memcpy(qc, &(tm6000_qctrl[i]),
- sizeof(*qc));
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int vidioc_g_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- int val;
-
- /* FIXME: Probably, those won't work! Maybe we need shadow regs */
- switch (ctrl->id) {
- case V4L2_CID_CONTRAST:
- val = tm6000_get_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0);
- break;
- case V4L2_CID_BRIGHTNESS:
- val = tm6000_get_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0);
- return 0;
- case V4L2_CID_SATURATION:
- val = tm6000_get_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0);
- return 0;
- case V4L2_CID_HUE:
- val = tm6000_get_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, 0);
- return 0;
- case V4L2_CID_AUDIO_MUTE:
- val = dev->ctl_mute;
- return 0;
- case V4L2_CID_AUDIO_VOLUME:
- val = dev->ctl_volume;
- return 0;
- default:
- return -EINVAL;
- }
-
- if (val < 0)
- return val;
-
- ctrl->value = val;
-
- return 0;
-}
-static int vidioc_s_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
- u8 val = ctrl->value;
-
- switch (ctrl->id) {
- case V4L2_CID_CONTRAST:
- tm6000_set_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, val);
- return 0;
- case V4L2_CID_BRIGHTNESS:
- tm6000_set_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, val);
- return 0;
- case V4L2_CID_SATURATION:
- tm6000_set_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, val);
- return 0;
- case V4L2_CID_HUE:
- tm6000_set_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, val);
- return 0;
- case V4L2_CID_AUDIO_MUTE:
- dev->ctl_mute = val;
- tm6000_tvaudio_set_mute(dev, val);
- return 0;
- case V4L2_CID_AUDIO_VOLUME:
- dev->ctl_volume = val;
- tm6000_set_volume(dev, val);
- return 0;
- }
- return -EINVAL;
-}
-
-static int vidioc_g_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (unlikely(UNSET == dev->tuner_type))
- return -EINVAL;
- if (0 != t->index)
- return -EINVAL;
-
- strcpy(t->name, "Television");
- t->type = V4L2_TUNER_ANALOG_TV;
- t->capability = V4L2_TUNER_CAP_NORM;
- t->rangehigh = 0xffffffffUL;
- t->rxsubchans = V4L2_TUNER_SUB_STEREO;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
-
- t->audmode = dev->amode;
-
- return 0;
-}
-
-static int vidioc_s_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (UNSET == dev->tuner_type)
- return -EINVAL;
- if (0 != t->index)
- return -EINVAL;
-
- dev->amode = t->audmode;
- dprintk(dev, 3, "audio mode: %x\n", t->audmode);
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
-
- return 0;
-}
-
-static int vidioc_g_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (unlikely(UNSET == dev->tuner_type))
- return -EINVAL;
-
- f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
- f->frequency = dev->freq;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f);
-
- return 0;
-}
-
-static int vidioc_s_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (unlikely(UNSET == dev->tuner_type))
- return -EINVAL;
- if (unlikely(f->tuner != 0))
- return -EINVAL;
- if (0 == fh->radio && V4L2_TUNER_ANALOG_TV != f->type)
- return -EINVAL;
- if (1 == fh->radio && V4L2_TUNER_RADIO != f->type)
- return -EINVAL;
-
- dev->freq = f->frequency;
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f);
-
- return 0;
-}
-
-static int radio_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
-
- strcpy(cap->driver, "tm6000");
- strlcpy(cap->card, dev->name, sizeof(dev->name));
- sprintf(cap->bus_info, "USB%04x:%04x",
- le16_to_cpu(dev->udev->descriptor.idVendor),
- le16_to_cpu(dev->udev->descriptor.idProduct));
- cap->version = dev->dev_type;
- cap->capabilities = V4L2_CAP_TUNER |
- V4L2_CAP_AUDIO |
- V4L2_CAP_RADIO |
- V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING;
-
- return 0;
-}
-
-static int radio_g_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
-
- if (0 != t->index)
- return -EINVAL;
-
- memset(t, 0, sizeof(*t));
- strcpy(t->name, "Radio");
- t->type = V4L2_TUNER_RADIO;
- t->rxsubchans = V4L2_TUNER_SUB_STEREO;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
-
- return 0;
-}
-
-static int radio_s_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
-
- if (0 != t->index)
- return -EINVAL;
-
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
-
- return 0;
-}
-
-static int radio_enum_input(struct file *file, void *priv,
- struct v4l2_input *i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (i->index != 0)
- return -EINVAL;
-
- if (!dev->rinput.type)
- return -EINVAL;
-
- strcpy(i->name, "Radio");
- i->type = V4L2_INPUT_TYPE_TUNER;
-
- return 0;
-}
-
-static int radio_g_input(struct file *filp, void *priv, unsigned int *i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (dev->input != 5)
- return -EINVAL;
-
- *i = dev->input - 5;
-
- return 0;
-}
-
-static int radio_g_audio(struct file *file, void *priv,
- struct v4l2_audio *a)
-{
- memset(a, 0, sizeof(*a));
- strcpy(a->name, "Radio");
- return 0;
-}
-
-static int radio_s_audio(struct file *file, void *priv,
- struct v4l2_audio *a)
-{
- return 0;
-}
-
-static int radio_s_input(struct file *filp, void *priv, unsigned int i)
-{
- struct tm6000_fh *fh = priv;
- struct tm6000_core *dev = fh->dev;
-
- if (i)
- return -EINVAL;
-
- if (!dev->rinput.type)
- return -EINVAL;
-
- dev->input = i + 5;
-
- return 0;
-}
-
-static int radio_s_std(struct file *file, void *fh, v4l2_std_id *norm)
-{
- return 0;
-}
-
-static int radio_queryctrl(struct file *file, void *priv,
- struct v4l2_queryctrl *c)
-{
- const struct v4l2_queryctrl *ctrl;
-
- if (c->id < V4L2_CID_BASE ||
- c->id >= V4L2_CID_LASTP1)
- return -EINVAL;
- if (c->id == V4L2_CID_AUDIO_MUTE) {
- ctrl = ctrl_by_id(c->id);
- *c = *ctrl;
- } else
- *c = no_ctrl;
-
- return 0;
-}
-
-/* ------------------------------------------------------------------
- File operations for the device
- ------------------------------------------------------------------*/
-
-static int tm6000_open(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- struct tm6000_core *dev = video_drvdata(file);
- struct tm6000_fh *fh;
- enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- int i, rc;
- int radio = 0;
-
- printk(KERN_INFO "tm6000: open called (dev=%s)\n",
- video_device_node_name(vdev));
-
- dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called (dev=%s)\n",
- video_device_node_name(vdev));
-
- switch (vdev->vfl_type) {
- case VFL_TYPE_GRABBER:
- type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- break;
- case VFL_TYPE_VBI:
- type = V4L2_BUF_TYPE_VBI_CAPTURE;
- break;
- case VFL_TYPE_RADIO:
- radio = 1;
- break;
- }
-
- /* If more than one user, mutex should be added */
- dev->users++;
-
- dprintk(dev, V4L2_DEBUG_OPEN, "open dev=%s type=%s users=%d\n",
- video_device_node_name(vdev), v4l2_type_names[type],
- dev->users);
-
- /* allocate + initialize per filehandle data */
- fh = kzalloc(sizeof(*fh), GFP_KERNEL);
- if (NULL == fh) {
- dev->users--;
- return -ENOMEM;
- }
-
- file->private_data = fh;
- fh->dev = dev;
- fh->radio = radio;
- dev->radio = radio;
- fh->type = type;
- dev->fourcc = format[0].fourcc;
-
- fh->fmt = format_by_fourcc(dev->fourcc);
-
- tm6000_get_std_res(dev);
-
- fh->width = dev->width;
- fh->height = dev->height;
-
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, "
- "dev->vidq=0x%08lx\n",
- (unsigned long)fh, (unsigned long)dev, (unsigned long)&dev->vidq);
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
- "queued=%d\n", list_empty(&dev->vidq.queued));
- dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
- "active=%d\n", list_empty(&dev->vidq.active));
-
- /* initialize hardware on analog mode */
- rc = tm6000_init_analog_mode(dev);
- if (rc < 0)
- return rc;
-
- if (dev->mode != TM6000_MODE_ANALOG) {
- /* Put all controls at a sane state */
- for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++)
- qctl_regs[i] = tm6000_qctrl[i].default_value;
-
- dev->mode = TM6000_MODE_ANALOG;
- }
-
- videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops,
- NULL, &dev->slock,
- fh->type,
- V4L2_FIELD_INTERLACED,
- sizeof(struct tm6000_buffer), fh, &dev->lock);
-
- if (fh->radio) {
- dprintk(dev, V4L2_DEBUG_OPEN, "video_open: setting radio device\n");
- dev->input = 5;
- tm6000_set_audio_rinput(dev);
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_radio);
- tm6000_prepare_isoc(dev);
- tm6000_start_thread(dev);
- }
-
- return 0;
-}
-
-static ssize_t
-tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos)
-{
- struct tm6000_fh *fh = file->private_data;
-
- if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- if (!res_get(fh->dev, fh, true))
- return -EBUSY;
-
- return videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0,
- file->f_flags & O_NONBLOCK);
- }
- return 0;
-}
-
-static unsigned int
-tm6000_poll(struct file *file, struct poll_table_struct *wait)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_buffer *buf;
-
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
- return POLLERR;
-
- if (!!is_res_streaming(fh->dev, fh))
- return POLLERR;
-
- if (!is_res_read(fh->dev, fh)) {
- /* streaming capture */
- if (list_empty(&fh->vb_vidq.stream))
- return POLLERR;
- buf = list_entry(fh->vb_vidq.stream.next, struct tm6000_buffer, vb.stream);
- } else {
- /* read() capture */
- return videobuf_poll_stream(file, &fh->vb_vidq,
- wait);
- }
- poll_wait(file, &buf->vb.done, wait);
- if (buf->vb.state == VIDEOBUF_DONE ||
- buf->vb.state == VIDEOBUF_ERROR)
- return POLLIN | POLLRDNORM;
- return 0;
-}
-
-static int tm6000_release(struct file *file)
-{
- struct tm6000_fh *fh = file->private_data;
- struct tm6000_core *dev = fh->dev;
- struct video_device *vdev = video_devdata(file);
-
- dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n",
- video_device_node_name(vdev), dev->users);
-
- dev->users--;
-
- res_free(dev, fh);
- if (!dev->users) {
- tm6000_uninit_isoc(dev);
- videobuf_mmap_free(&fh->vb_vidq);
- }
-
- kfree(fh);
-
- return 0;
-}
-
-static int tm6000_mmap(struct file *file, struct vm_area_struct * vma)
-{
- struct tm6000_fh *fh = file->private_data;
- int ret;
-
- ret = videobuf_mmap_mapper(&fh->vb_vidq, vma);
-
- return ret;
-}
-
-static struct v4l2_file_operations tm6000_fops = {
- .owner = THIS_MODULE,
- .open = tm6000_open,
- .release = tm6000_release,
- .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
- .read = tm6000_read,
- .poll = tm6000_poll,
- .mmap = tm6000_mmap,
-};
-
-static const struct v4l2_ioctl_ops video_ioctl_ops = {
- .vidioc_querycap = vidioc_querycap,
- .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
- .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
- .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
- .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
- .vidioc_s_std = vidioc_s_std,
- .vidioc_enum_input = vidioc_enum_input,
- .vidioc_g_input = vidioc_g_input,
- .vidioc_s_input = vidioc_s_input,
- .vidioc_queryctrl = vidioc_queryctrl,
- .vidioc_g_ctrl = vidioc_g_ctrl,
- .vidioc_s_ctrl = vidioc_s_ctrl,
- .vidioc_g_tuner = vidioc_g_tuner,
- .vidioc_s_tuner = vidioc_s_tuner,
- .vidioc_g_frequency = vidioc_g_frequency,
- .vidioc_s_frequency = vidioc_s_frequency,
- .vidioc_streamon = vidioc_streamon,
- .vidioc_streamoff = vidioc_streamoff,
- .vidioc_reqbufs = vidioc_reqbufs,
- .vidioc_querybuf = vidioc_querybuf,
- .vidioc_qbuf = vidioc_qbuf,
- .vidioc_dqbuf = vidioc_dqbuf,
-};
-
-static struct video_device tm6000_template = {
- .name = "tm6000",
- .fops = &tm6000_fops,
- .ioctl_ops = &video_ioctl_ops,
- .release = video_device_release,
- .tvnorms = TM6000_STD,
- .current_norm = V4L2_STD_NTSC_M,
-};
-
-static const struct v4l2_file_operations radio_fops = {
- .owner = THIS_MODULE,
- .open = tm6000_open,
- .release = tm6000_release,
- .unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops radio_ioctl_ops = {
- .vidioc_querycap = radio_querycap,
- .vidioc_g_tuner = radio_g_tuner,
- .vidioc_enum_input = radio_enum_input,
- .vidioc_g_audio = radio_g_audio,
- .vidioc_s_tuner = radio_s_tuner,
- .vidioc_s_audio = radio_s_audio,
- .vidioc_s_input = radio_s_input,
- .vidioc_s_std = radio_s_std,
- .vidioc_queryctrl = radio_queryctrl,
- .vidioc_g_input = radio_g_input,
- .vidioc_g_ctrl = vidioc_g_ctrl,
- .vidioc_s_ctrl = vidioc_s_ctrl,
- .vidioc_g_frequency = vidioc_g_frequency,
- .vidioc_s_frequency = vidioc_s_frequency,
-};
-
-struct video_device tm6000_radio_template = {
- .name = "tm6000",
- .fops = &radio_fops,
- .ioctl_ops = &radio_ioctl_ops,
-};
-
-/* -----------------------------------------------------------------
- * Initialization and module stuff
- * ------------------------------------------------------------------
- */
-
-static struct video_device *vdev_init(struct tm6000_core *dev,
- const struct video_device
- *template, const char *type_name)
-{
- struct video_device *vfd;
-
- vfd = video_device_alloc();
- if (NULL == vfd)
- return NULL;
-
- *vfd = *template;
- vfd->v4l2_dev = &dev->v4l2_dev;
- vfd->release = video_device_release;
- vfd->debug = tm6000_debug;
- vfd->lock = &dev->lock;
-
- snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name);
-
- video_set_drvdata(vfd, dev);
- return vfd;
-}
-
-int tm6000_v4l2_register(struct tm6000_core *dev)
-{
- int ret = -1;
-
- dev->vfd = vdev_init(dev, &tm6000_template, "video");
-
- if (!dev->vfd) {
- printk(KERN_INFO "%s: can't register video device\n",
- dev->name);
- return -ENOMEM;
- }
-
- /* init video dma queues */
- INIT_LIST_HEAD(&dev->vidq.active);
- INIT_LIST_HEAD(&dev->vidq.queued);
-
- ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr);
-
- if (ret < 0) {
- printk(KERN_INFO "%s: can't register video device\n",
- dev->name);
- return ret;
- }
-
- printk(KERN_INFO "%s: registered device %s\n",
- dev->name, video_device_node_name(dev->vfd));
-
- if (dev->caps.has_radio) {
- dev->radio_dev = vdev_init(dev, &tm6000_radio_template,
- "radio");
- if (!dev->radio_dev) {
- printk(KERN_INFO "%s: can't register radio device\n",
- dev->name);
- return ret; /* FIXME release resource */
- }
-
- ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
- radio_nr);
- if (ret < 0) {
- printk(KERN_INFO "%s: can't register radio device\n",
- dev->name);
- return ret; /* FIXME release resource */
- }
-
- printk(KERN_INFO "%s: registered device %s\n",
- dev->name, video_device_node_name(dev->radio_dev));
- }
-
- printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret);
- return ret;
-}
-
-int tm6000_v4l2_unregister(struct tm6000_core *dev)
-{
- video_unregister_device(dev->vfd);
-
- if (dev->radio_dev) {
- if (video_is_registered(dev->radio_dev))
- video_unregister_device(dev->radio_dev);
- else
- video_device_release(dev->radio_dev);
- dev->radio_dev = NULL;
- }
-
- return 0;
-}
-
-int tm6000_v4l2_exit(void)
-{
- return 0;
-}
-
-module_param(video_nr, int, 0);
-MODULE_PARM_DESC(video_nr, "Allow changing video device number");
-
-module_param_named(debug, tm6000_debug, int, 0444);
-MODULE_PARM_DESC(debug, "activates debug info");
-
-module_param(vid_limit, int, 0644);
-MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes");
-
diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
deleted file mode 100644
index c56da62..0000000
--- a/drivers/staging/tm6000/tm6000.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * tm6000.h - driver for TM5600/TM6000/TM6010 USB video capture devices
- *
- * Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- * - DVB-T support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Use the tm6000-hack, instead of the proper initialization code i*/
-/* #define HACK 1 */
-
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/videobuf-vmalloc.h>
-#include "tm6000-usb-isoc.h"
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <media/v4l2-device.h>
-#include <linux/version.h>
-#include <linux/dvb/frontend.h>
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dmxdev.h"
-
-#define TM6000_VERSION KERNEL_VERSION(0, 0, 2)
-
-/* Inputs */
-enum tm6000_itype {
- TM6000_INPUT_TV = 1,
- TM6000_INPUT_COMPOSITE1,
- TM6000_INPUT_COMPOSITE2,
- TM6000_INPUT_SVIDEO,
- TM6000_INPUT_DVB,
- TM6000_INPUT_RADIO,
-};
-
-enum tm6000_mux {
- TM6000_VMUX_VIDEO_A = 1,
- TM6000_VMUX_VIDEO_B,
- TM6000_VMUX_VIDEO_AB,
- TM6000_AMUX_ADC1,
- TM6000_AMUX_ADC2,
- TM6000_AMUX_SIF1,
- TM6000_AMUX_SIF2,
- TM6000_AMUX_I2S,
-};
-
-enum tm6000_devtype {
- TM6000 = 0,
- TM5600,
- TM6010,
-};
-
-struct tm6000_input {
- enum tm6000_itype type;
- enum tm6000_mux vmux;
- enum tm6000_mux amux;
- unsigned int v_gpio;
- unsigned int a_gpio;
-};
-
-/* ------------------------------------------------------------------
- * Basic structures
- * ------------------------------------------------------------------
- */
-
-struct tm6000_fmt {
- char *name;
- u32 fourcc; /* v4l2 format id */
- int depth;
-};
-
-/* buffer for one video frame */
-struct tm6000_buffer {
- /* common v4l buffer stuff -- must be first */
- struct videobuf_buffer vb;
-
- struct tm6000_fmt *fmt;
-};
-
-struct tm6000_dmaqueue {
- struct list_head active;
- struct list_head queued;
-
- /* thread for generating video stream*/
- struct task_struct *kthread;
- wait_queue_head_t wq;
- /* Counters to control fps rate */
- int frame;
- int ini_jiffies;
-};
-
-/* device states */
-enum tm6000_core_state {
- DEV_INITIALIZED = 0x01,
- DEV_DISCONNECTED = 0x02,
- DEV_MISCONFIGURED = 0x04,
-};
-
-/* io methods */
-enum tm6000_io_method {
- IO_NONE,
- IO_READ,
- IO_MMAP,
-};
-
-enum tm6000_mode {
- TM6000_MODE_UNKNOWN = 0,
- TM6000_MODE_ANALOG,
- TM6000_MODE_DIGITAL,
-};
-
-struct tm6000_gpio {
- int tuner_reset;
- int tuner_on;
- int demod_reset;
- int demod_on;
- int power_led;
- int dvb_led;
- int ir;
-};
-
-struct tm6000_capabilities {
- unsigned int has_tuner:1;
- unsigned int has_tda9874:1;
- unsigned int has_dvb:1;
- unsigned int has_zl10353:1;
- unsigned int has_eeprom:1;
- unsigned int has_remote:1;
- unsigned int has_radio:1;
-};
-
-struct tm6000_dvb {
- struct dvb_adapter adapter;
- struct dvb_demux demux;
- struct dvb_frontend *frontend;
- struct dmxdev dmxdev;
- unsigned int streams;
- struct urb *bulk_urb;
- struct mutex mutex;
-};
-
-struct snd_tm6000_card {
- struct snd_card *card;
- spinlock_t reg_lock;
- struct tm6000_core *core;
- struct snd_pcm_substream *substream;
-
- /* temporary data for buffer fill processing */
- unsigned buf_pos;
- unsigned period_pos;
-};
-
-struct tm6000_endpoint {
- struct usb_host_endpoint *endp;
- __u8 bInterfaceNumber;
- __u8 bAlternateSetting;
- unsigned maxsize;
-};
-
-struct tm6000_core {
- /* generic device properties */
- char name[30]; /* name (including minor) of the device */
- int model; /* index in the device_data struct */
- int devno; /* marks the number of this device */
- enum tm6000_devtype dev_type; /* type of device */
- unsigned char eedata[256]; /* Eeprom data */
- unsigned eedata_size; /* Size of the eeprom info */
-
- v4l2_std_id norm; /* Current norm */
- int width, height; /* Selected resolution */
-
- enum tm6000_core_state state;
-
- /* Device Capabilities*/
- struct tm6000_capabilities caps;
-
- /* Tuner configuration */
- int tuner_type; /* type of the tuner */
- int tuner_addr; /* tuner address */
-
- struct tm6000_gpio gpio;
-
- char *ir_codes;
-
- __u8 radio;
-
- /* Demodulator configuration */
- int demod_addr; /* demodulator address */
-
- int audio_bitrate;
- /* i2c i/o */
- struct i2c_adapter i2c_adap;
- struct i2c_client i2c_client;
-
-
- /* extension */
- struct list_head devlist;
-
- /* video for linux */
- int users;
-
- /* various device info */
- struct tm6000_fh *resources; /* Points to fh that is streaming */
- bool is_res_read;
-
- struct video_device *vfd;
- struct video_device *radio_dev;
- struct tm6000_dmaqueue vidq;
- struct v4l2_device v4l2_dev;
-
- int input;
- struct tm6000_input vinput[3]; /* video input */
- struct tm6000_input rinput; /* radio input */
-
- int freq;
- unsigned int fourcc;
-
- enum tm6000_mode mode;
-
- int ctl_mute; /* audio */
- int ctl_volume;
- int amode;
-
- /* DVB-T support */
- struct tm6000_dvb *dvb;
-
- /* audio support */
- struct snd_tm6000_card *adev;
- struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */
- atomic_t stream_started; /* stream should be running if true */
-
- struct tm6000_IR *ir;
-
- /* locks */
- struct mutex lock;
-
- /* usb transfer */
- struct usb_device *udev; /* the usb device */
-
- struct tm6000_endpoint bulk_in, bulk_out, isoc_in, isoc_out;
- struct tm6000_endpoint int_in, int_out;
-
- /* scaler!=0 if scaler is active*/
- int scaler;
-
- /* Isoc control struct */
- struct usb_isoc_ctl isoc_ctl;
-
- spinlock_t slock;
-};
-
-enum tm6000_ops_type {
- TM6000_AUDIO = 0x10,
- TM6000_DVB = 0x20,
-};
-
-struct tm6000_ops {
- struct list_head next;
- char *name;
- enum tm6000_ops_type type;
- int (*init)(struct tm6000_core *);
- int (*fini)(struct tm6000_core *);
- int (*fillbuf)(struct tm6000_core *, char *buf, int size);
-};
-
-struct tm6000_fh {
- struct tm6000_core *dev;
- unsigned int radio;
-
- /* video capture */
- struct tm6000_fmt *fmt;
- unsigned int width, height;
- struct videobuf_queue vb_vidq;
-
- enum v4l2_buf_type type;
-};
-
-#define TM6000_STD (V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc| \
- V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \
- V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM)
-
-/* In tm6000-cards.c */
-
-int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
-int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
-int tm6000_cards_setup(struct tm6000_core *dev);
-void tm6000_flash_led(struct tm6000_core *dev, u8 state);
-
-/* In tm6000-core.c */
-
-int tm6000_read_write_usb(struct tm6000_core *dev, u8 reqtype, u8 req,
- u16 value, u16 index, u8 *buf, u16 len);
-int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
-int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
- u16 index, u16 mask);
-int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
-int tm6000_init(struct tm6000_core *dev);
-
-int tm6000_init_analog_mode(struct tm6000_core *dev);
-int tm6000_init_digital_mode(struct tm6000_core *dev);
-int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate);
-int tm6000_set_audio_rinput(struct tm6000_core *dev);
-int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute);
-void tm6000_set_volume(struct tm6000_core *dev, int vol);
-
-int tm6000_v4l2_register(struct tm6000_core *dev);
-int tm6000_v4l2_unregister(struct tm6000_core *dev);
-int tm6000_v4l2_exit(void);
-void tm6000_set_fourcc_format(struct tm6000_core *dev);
-
-void tm6000_remove_from_devlist(struct tm6000_core *dev);
-void tm6000_add_into_devlist(struct tm6000_core *dev);
-int tm6000_register_extension(struct tm6000_ops *ops);
-void tm6000_unregister_extension(struct tm6000_ops *ops);
-void tm6000_init_extension(struct tm6000_core *dev);
-void tm6000_close_extension(struct tm6000_core *dev);
-int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
- char *buf, int size);
-
-
-/* In tm6000-stds.c */
-void tm6000_get_std_res(struct tm6000_core *dev);
-int tm6000_set_standard(struct tm6000_core *dev);
-
-/* In tm6000-i2c.c */
-int tm6000_i2c_register(struct tm6000_core *dev);
-int tm6000_i2c_unregister(struct tm6000_core *dev);
-
-/* In tm6000-queue.c */
-
-int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma);
-
-int tm6000_vidioc_streamon(struct file *file, void *priv,
- enum v4l2_buf_type i);
-int tm6000_vidioc_streamoff(struct file *file, void *priv,
- enum v4l2_buf_type i);
-int tm6000_vidioc_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *rb);
-int tm6000_vidioc_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *b);
-int tm6000_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b);
-int tm6000_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b);
-ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count,
- loff_t *f_pos);
-unsigned int tm6000_v4l2_poll(struct file *file,
- struct poll_table_struct *wait);
-int tm6000_queue_init(struct tm6000_core *dev);
-
-/* In tm6000-alsa.c */
-/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/
-
-/* In tm6000-input.c */
-int tm6000_ir_init(struct tm6000_core *dev);
-int tm6000_ir_fini(struct tm6000_core *dev);
-void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
-int tm6000_ir_int_start(struct tm6000_core *dev);
-void tm6000_ir_int_stop(struct tm6000_core *dev);
-
-/* Debug stuff */
-
-extern int tm6000_debug;
-
-#define dprintk(dev, level, fmt, arg...) do {\
- if (tm6000_debug & level) \
- printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \
- dev->name, __FUNCTION__ , ##arg); } while (0)
-
-#define V4L2_DEBUG_REG 0x0004
-#define V4L2_DEBUG_I2C 0x0008
-#define V4L2_DEBUG_QUEUE 0x0010
-#define V4L2_DEBUG_ISOC 0x0020
-#define V4L2_DEBUG_RES_LOCK 0x0040 /* Resource locking */
-#define V4L2_DEBUG_OPEN 0x0080 /* video open/close debug */
-
-#define tm6000_err(fmt, arg...) do {\
- printk(KERN_ERR "tm6000 %s :"fmt, \
- __FUNCTION__ , ##arg); } while (0)
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
index 36db231..277e408 100644
--- a/drivers/staging/xgifb/XGI_main_26.c
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -1300,27 +1300,17 @@
return 0;
}
-static int XGIfb_pan_var(struct xgifb_video_info *xgifb_info,
- struct fb_var_screeninfo *var)
+static int XGIfb_pan_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
+ struct xgifb_video_info *xgifb_info = info->par;
unsigned int base;
/* printk("Inside pan_var"); */
- if (var->xoffset > (var->xres_virtual - var->xres)) {
- /* printk("Pan: xo: %d xv %d xr %d\n",
- var->xoffset, var->xres_virtual, var->xres); */
- return -EINVAL;
- }
- if (var->yoffset > (var->yres_virtual - var->yres)) {
- /* printk("Pan: yo: %d yv %d yr %d\n",
- var->yoffset, var->yres_virtual, var->yres); */
- return -EINVAL;
- }
- base = var->yoffset * var->xres_virtual + var->xoffset;
+ base = var->yoffset * info->var.xres_virtual + var->xoffset;
/* calculate base bpp dep. */
- switch (var->bits_per_pixel) {
+ switch (info->var.bits_per_pixel) {
case 16:
base >>= 1;
break;
@@ -1615,13 +1605,12 @@
struct fb_info *info)
{
int err;
- struct xgifb_video_info *xgifb_info = info->par;
/* printk("\nInside pan_display:\n"); */
- if (var->xoffset > (var->xres_virtual - var->xres))
+ if (var->xoffset > (info->var.xres_virtual - info->var.xres))
return -EINVAL;
- if (var->yoffset > (var->yres_virtual - var->yres))
+ if (var->yoffset > (info->var.yres_virtual - info->var.yres))
return -EINVAL;
if (var->vmode & FB_VMODE_YWRAP) {
@@ -1634,7 +1623,7 @@
> info->var.yres_virtual)
return -EINVAL;
}
- err = XGIfb_pan_var(xgifb_info, var);
+ err = XGIfb_pan_var(var, info);
if (err < 0)
return err;
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 8816f53..b3d1741 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -1,6 +1,6 @@
config VT
bool "Virtual terminal" if EXPERT
- depends on !S390
+ depends on !S390 && !UML
select INPUT
default y
---help---
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 00a73ec..530181e 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/console.h>
+#include <linux/of.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
@@ -472,8 +473,6 @@
{},
};
MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
-#else
-#define altera_jtaguart_match NULL
#endif /* CONFIG_OF */
static struct platform_driver altera_jtaguart_platform_driver = {
@@ -482,7 +481,7 @@
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
- .of_match_table = altera_jtaguart_match,
+ .of_match_table = of_match_ptr(altera_jtaguart_match),
},
};
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index d902558..1d04c50 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -616,8 +616,6 @@
{},
};
MODULE_DEVICE_TABLE(of, altera_uart_match);
-#else
-#define altera_uart_match NULL
#endif /* CONFIG_OF */
static struct platform_driver altera_uart_platform_driver = {
@@ -626,7 +624,7 @@
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
- .of_match_table = altera_uart_match,
+ .of_match_table = of_match_ptr(altera_uart_match),
},
};
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index c0d10c4..efdf92c 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -312,12 +312,16 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
int retval;
+ retval = clk_prepare(uap->clk);
+ if (retval)
+ goto out;
+
/*
* Try to enable the clock producer.
*/
retval = clk_enable(uap->clk);
if (retval)
- goto out;
+ goto clk_unprep;
uap->port.uartclk = clk_get_rate(uap->clk);
@@ -343,6 +347,8 @@
clk_dis:
clk_disable(uap->clk);
+ clk_unprep:
+ clk_unprepare(uap->clk);
out:
return retval;
}
@@ -370,6 +376,7 @@
* Shut down the clock producer
*/
clk_disable(uap->clk);
+ clk_unprepare(uap->clk);
}
static void
@@ -626,6 +633,7 @@
int bits = 8;
int parity = 'n';
int flow = 'n';
+ int ret;
/*
* Check whether an invalid uart number has been specified, and
@@ -638,6 +646,10 @@
if (!uap)
return -ENODEV;
+ ret = clk_prepare(uap->clk);
+ if (ret)
+ return ret;
+
uap->port.uartclk = clk_get_rate(uap->clk);
if (options)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index f5f6831..00233af 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1367,12 +1367,16 @@
unsigned int cr;
int retval;
+ retval = clk_prepare(uap->clk);
+ if (retval)
+ goto out;
+
/*
* Try to enable the clock producer.
*/
retval = clk_enable(uap->clk);
if (retval)
- goto out;
+ goto clk_unprep;
uap->port.uartclk = clk_get_rate(uap->clk);
@@ -1446,6 +1450,8 @@
clk_dis:
clk_disable(uap->clk);
+ clk_unprep:
+ clk_unprepare(uap->clk);
out:
return retval;
}
@@ -1497,6 +1503,7 @@
* Shut down the clock producer
*/
clk_disable(uap->clk);
+ clk_unprepare(uap->clk);
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
@@ -1800,6 +1807,7 @@
int bits = 8;
int parity = 'n';
int flow = 'n';
+ int ret;
/*
* Check whether an invalid uart number has been specified, and
@@ -1812,6 +1820,10 @@
if (!uap)
return -ENODEV;
+ ret = clk_prepare(uap->clk);
+ if (ret)
+ return ret;
+
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 9988c0c..4a0f86f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -48,7 +48,7 @@
#ifdef CONFIG_ARM
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#endif
#define PDC_BUFFER_SIZE 512
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 54ffdc6..163fc902 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1290,17 +1290,20 @@
static int serial_imx_probe_dt(struct imx_port *sport,
struct platform_device *pdev)
{
- static int portnum = 0;
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_id =
of_match_device(imx_uart_dt_ids, &pdev->dev);
+ int ret;
if (!np)
return -ENODEV;
- sport->port.line = portnum++;
- if (sport->port.line >= UART_NR)
- return -EINVAL;
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+ return -ENODEV;
+ }
+ sport->port.line = ret;
if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
sport->have_rtscts = 1;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 29cbfd8..8131e2c 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -19,6 +19,7 @@
# define SUPPORT_SYSRQ
#endif
+#include <linux/atomic.h>
#include <linux/hrtimer.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -33,6 +34,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include "msm_serial.h"
@@ -589,9 +592,8 @@
iowrite32(GSBI_PROTOCOL_IDLE, msm_port->gsbi_base +
GSBI_CONTROL);
- gsbi_resource = platform_get_resource_byname(pdev,
- IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev,
+ IORESOURCE_MEM, 1);
if (unlikely(!gsbi_resource))
return;
@@ -612,8 +614,7 @@
resource_size_t size;
int ret;
- uart_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!uart_resource))
return -ENXIO;
@@ -628,8 +629,7 @@
goto fail_release_port;
}
- gsbi_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
/* Is this a GSBI-based port? */
if (gsbi_resource) {
size = resource_size(gsbi_resource);
@@ -857,6 +857,8 @@
.cons = MSM_CONSOLE,
};
+static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
+
static int __init msm_serial_probe(struct platform_device *pdev)
{
struct msm_port *msm_port;
@@ -864,6 +866,9 @@
struct uart_port *port;
int irq;
+ if (pdev->id == -1)
+ pdev->id = atomic_inc_return(&msm_uart_next_id) - 1;
+
if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
return -ENXIO;
@@ -873,7 +878,7 @@
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
- if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "gsbi_resource"))
+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
msm_port->is_uartdm = 1;
else
msm_port->is_uartdm = 0;
@@ -897,8 +902,7 @@
printk(KERN_INFO "uartclk = %d\n", port->uartclk);
- resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!resource))
return -ENXIO;
port->mapbase = resource->start;
@@ -922,11 +926,17 @@
return 0;
}
+static struct of_device_id msm_match_table[] = {
+ { .compatible = "qcom,msm-uart" },
+ {}
+};
+
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
.driver = {
.name = "msm_serial",
.owner = THIS_MODULE,
+ .of_match_table = msm_match_table,
},
};
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e58cece..e8c9cee 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -200,17 +200,7 @@
.remove = of_platform_serial_remove,
};
-static int __init of_platform_serial_init(void)
-{
- return platform_driver_register(&of_platform_serial_driver);
-}
-module_init(of_platform_serial_init);
-
-static void __exit of_platform_serial_exit(void)
-{
- return platform_driver_unregister(&of_platform_serial_driver);
-};
-module_exit(of_platform_serial_exit);
+module_platform_driver(of_platform_serial_driver);
MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>");
MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index b908615..6cd4143 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -569,8 +569,6 @@
{}
};
MODULE_DEVICE_TABLE(of, ulite_of_match);
-#else /* CONFIG_OF */
-#define ulite_of_match NULL
#endif /* CONFIG_OF */
static int __devinit ulite_probe(struct platform_device *pdev)
@@ -610,7 +608,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "uartlite",
- .of_match_table = ulite_of_match,
+ .of_match_table = of_match_ptr(ulite_of_match),
},
};
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 944291e..ba3a46b 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -35,8 +35,7 @@
static void at91_start_clock(void)
{
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_enable(hclk);
+ clk_enable(hclk);
clk_enable(iclk);
clk_enable(fclk);
clocked = 1;
@@ -46,8 +45,7 @@
{
clk_disable(fclk);
clk_disable(iclk);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_disable(hclk);
+ clk_disable(hclk);
clocked = 0;
}
@@ -142,8 +140,7 @@
iclk = clk_get(&pdev->dev, "ohci_clk");
fclk = clk_get(&pdev->dev, "uhpck");
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- hclk = clk_get(&pdev->dev, "hck0");
+ hclk = clk_get(&pdev->dev, "hclk");
at91_start_hc(pdev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -155,8 +152,7 @@
/* Error handling */
at91_stop_hc(pdev);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_put(hclk);
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
@@ -192,8 +188,7 @@
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_put(hclk);
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
fclk = iclk = hclk = NULL;
@@ -223,6 +218,156 @@
return 0;
}
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+ if (port < 0 || port >= 2)
+ return;
+
+ gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+ if (port < 0 || port >= 2)
+ return -EINVAL;
+
+ return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ int length = ohci_hub_status_data(hcd, buf);
+ int port;
+
+ for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ if (pdata->overcurrent_changed[port]) {
+ if (! length)
+ length = 1;
+ buf[0] |= 1 << (port + 1);
+ }
+ }
+
+ return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ struct usb_hub_descriptor *desc;
+ int ret = -EINVAL;
+ u32 *data = (u32 *)buf;
+
+ dev_dbg(hcd->self.controller,
+ "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+ hcd, typeReq, wValue, wIndex, buf, wLength);
+
+ switch (typeReq) {
+ case SetPortFeature:
+ if (wValue == USB_PORT_FEAT_POWER) {
+ dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+ ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+ goto out;
+ }
+ break;
+
+ case ClearPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: C_OVER_CURRENT\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ pdata->overcurrent_changed[wIndex-1] = 0;
+ pdata->overcurrent_status[wIndex-1] = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: OVER_CURRENT\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ pdata->overcurrent_status[wIndex-1] = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: POWER\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+ return 0;
+ }
+ }
+ break;
+ }
+
+ ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+ if (ret)
+ goto out;
+
+ switch (typeReq) {
+ case GetHubDescriptor:
+
+ /* update the hub's descriptor */
+
+ desc = (struct usb_hub_descriptor *)buf;
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ /* remove the old configurations for power-switching, and
+ * over-current protection, and insert our new configuration
+ */
+
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+ desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+ if (pdata->overcurrent_supported) {
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+ desc->wHubCharacteristics |= cpu_to_le16(0x0008|0x0001);
+ }
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ return ret;
+
+ case GetPortStatus:
+ /* check port status */
+
+ dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+ if (wIndex == 1 || wIndex == 2) {
+ if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+ *data &= ~cpu_to_le32(RH_PS_PPS);
+ }
+
+ if (pdata->overcurrent_changed[wIndex-1]) {
+ *data |= cpu_to_le32(RH_PS_OCIC);
+ }
+
+ if (pdata->overcurrent_status[wIndex-1]) {
+ *data |= cpu_to_le32(RH_PS_POCI);
+ }
+ }
+ }
+
+ out:
+ return ret;
+}
+
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_at91_hc_driver = {
@@ -258,8 +403,8 @@
/*
* root hub support
*/
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
+ .hub_status_data = ohci_at91_hub_status_data,
+ .hub_control = ohci_at91_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -269,22 +414,71 @@
/*-------------------------------------------------------------------------*/
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct at91_usbh_data *pdata = pdev->dev.platform_data;
+ int val, gpio, port;
+
+ /* From the GPIO notifying the over-current situation, find
+ * out the corresponding port */
+ gpio = irq_to_gpio(irq);
+ for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ if (pdata->overcurrent_pin[port] == gpio)
+ break;
+ }
+
+ if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+ dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+ return IRQ_HANDLED;
+ }
+
+ val = gpio_get_value(gpio);
+
+ /* When notified of an over-current situation, disable power
+ on the corresponding port, and mark this port in
+ over-current. */
+ if (! val) {
+ ohci_at91_usb_set_power(pdata, port, 0);
+ pdata->overcurrent_status[port] = 1;
+ pdata->overcurrent_changed[port] = 1;
+ }
+
+ dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+ val ? "exited" : "notified");
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
if (pdata) {
- /* REVISIT make the driver support per-port power switching,
- * and also overcurrent detection. Here we assume the ports
- * are always powered while this driver is active, and use
- * active-low power switches.
- */
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
- gpio_direction_output(pdata->vbus_pin[i], 0);
+ ohci_at91_usb_set_power(pdata, i, 1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+ int ret;
+
+ if (pdata->overcurrent_pin[i] <= 0)
+ continue;
+ gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+
+ ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED, "ohci_overcurrent", pdev);
+ if (ret) {
+ gpio_free(pdata->overcurrent_pin[i]);
+ dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+ }
}
}
@@ -301,9 +495,16 @@
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
- gpio_direction_output(pdata->vbus_pin[i], 1);
+ ohci_at91_usb_set_power(pdata, i, 0);
gpio_free(pdata->vbus_pin[i]);
}
+
+ for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+ if (pdata->overcurrent_pin[i] <= 0)
+ continue;
+ free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
+ gpio_free(pdata->overcurrent_pin[i]);
+ }
}
device_init_wakeup(&pdev->dev, 0);
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 9ad8bee..0013db7 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -26,7 +26,7 @@
#include <mach/platform.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 8bdf25a..f9a3f62 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,7 +35,7 @@
#include <mach/hardware.h>
#include <mach/memory.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cputype.h>
#include <asm/mach-types.h>
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index b0176e4..61f4ee4 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -41,12 +41,6 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-#ifdef CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
#include <asm/uaccess.h>
#include "musb_core.h"
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
index 75a39ea..a425d65 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -378,8 +378,8 @@
|| var->xoffset)
return -EINVAL;
} else {
- if (var->xoffset + var->xres > info->var.xres_virtual ||
- var->yoffset + var->yres > info->var.yres_virtual)
+ if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+ var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
}
info->var.xoffset = var->xoffset;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 549b9606..8165c55 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -259,6 +259,15 @@
comment "Frame buffer hardware drivers"
depends on FB
+config FB_GRVGA
+ tristate "Aeroflex Gaisler framebuffer support"
+ depends on FB && SPARC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
@@ -1756,9 +1765,10 @@
config FB_AU1200
bool "Au1200 LCD Driver"
depends on (FB = y) && MIPS && SOC_AU1200
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
help
This is the framebuffer driver for the AMD Au1200 SOC. It can drive
various panels and CRTs by passing in kernel cmd line option
@@ -2027,7 +2037,7 @@
config FB_S3C
tristate "Samsung S3C framebuffer support"
- depends on FB && S3C_DEV_FB
+ depends on FB && (S3C_DEV_FB || S5P_DEV_FIMD0)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -2110,6 +2120,22 @@
If unsure, say N.
+config FB_SMSCUFX
+ tristate "SMSC UFX6000/7000 USB Framebuffer support"
+ depends on FB && USB
+ select FB_MODE_HELPERS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ ---help---
+ This is a kernel framebuffer driver for SMSC UFX USB devices.
+ Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+ mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
+ (USB 3.0) devices.
+ To compile as a module, choose M here: the module name is smscufx.
+
config FB_UDL
tristate "Displaylink USB Framebuffer support"
depends on FB && USB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 8b83129..9b9d8ff 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -33,6 +33,7 @@
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
+obj-$(CONFIG_FB_GRVGA) += grvga.o
obj-$(CONFIG_FB_PM2) += pm2fb.o
obj-$(CONFIG_FB_PM3) += pm3fb.o
@@ -127,6 +128,7 @@
obj-$(CONFIG_FB_PS3) += ps3fb.o
obj-$(CONFIG_FB_SM501) += sm501fb.o
obj-$(CONFIG_FB_UDL) += udlfb.o
+obj-$(CONFIG_FB_SMSCUFX) += smscufx.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 6183a57..b303f17 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -850,9 +850,10 @@
u_int y_bottom = var->yoffset;
if (!(var->vmode & FB_VMODE_YWRAP))
- y_bottom += var->yres;
+ y_bottom += info->var.yres;
- BUG_ON(y_bottom > var->yres_virtual);
+ if (y_bottom > info->var.yres_virtual)
+ return -EINVAL;
acornfb_update_dma(info, var);
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index cf03ad0..2cda6ba 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -447,6 +447,10 @@
goto out;
}
+ ret = clk_prepare(fb->clk);
+ if (ret)
+ goto free_clk;
+
fb->fb.device = &fb->dev->dev;
fb->fb.fix.mmio_start = fb->dev->res.start;
@@ -456,7 +460,7 @@
if (!fb->regs) {
printk(KERN_ERR "CLCD: unable to remap registers\n");
ret = -ENOMEM;
- goto free_clk;
+ goto clk_unprep;
}
fb->fb.fbops = &clcdfb_ops;
@@ -530,6 +534,8 @@
fb_dealloc_cmap(&fb->fb.cmap);
unmap:
iounmap(fb->regs);
+ clk_unprep:
+ clk_unprepare(fb->clk);
free_clk:
clk_put(fb->clk);
out:
@@ -595,6 +601,7 @@
if (fb->fb.cmap.len)
fb_dealloc_cmap(&fb->fb.cmap);
iounmap(fb->regs);
+ clk_unprepare(fb->clk);
clk_put(fb->clk);
fb->board->remove(fb);
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 8686429..555dd4c 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -908,13 +908,14 @@
unsigned int offset;
/* Calculate the offset */
- if (var->bits_per_pixel == 0) {
- offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2);
+ if (info->var.bits_per_pixel == 0) {
+ offset = (var->yoffset / 16) * (info->var.xres_virtual / 2)
+ + (var->xoffset / 2);
offset = offset >> 2;
} else {
offset = (var->yoffset * info->fix.line_length) +
- (var->xoffset * var->bits_per_pixel / 8);
- offset = offset >> ((var->bits_per_pixel == 4) ? 2 : 3);
+ (var->xoffset * info->var.bits_per_pixel / 8);
+ offset = offset >> ((info->var.bits_per_pixel == 4) ? 2 : 3);
}
/* Set the offset */
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 817ab60..4ac48d9 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -21,7 +21,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
@@ -39,7 +39,8 @@
| FBINFO_HWACCEL_YPAN)
static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- struct fb_var_screeninfo *var)
+ struct fb_var_screeninfo *var,
+ struct fb_info *info)
{
}
@@ -50,14 +51,16 @@
| FBINFO_HWACCEL_YPAN)
static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- struct fb_var_screeninfo *var)
+ struct fb_var_screeninfo *var,
+ struct fb_info *info)
{
u32 dma2dcfg;
u32 pixeloff;
- pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
+ pixeloff = (var->xoffset * info->var.bits_per_pixel) & 0x1f;
- dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
+ dma2dcfg = (info->var.xres_virtual - info->var.xres)
+ * info->var.bits_per_pixel / 8;
dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
@@ -249,14 +252,14 @@
unsigned long dma_addr;
dma_addr = (fix->smem_start + var->yoffset * fix->line_length
- + var->xoffset * var->bits_per_pixel / 8);
+ + var->xoffset * info->var.bits_per_pixel / 8);
dma_addr &= ~3UL;
/* Set framebuffer DMA base address and pixel offset */
lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
- atmel_lcdfb_update_dma2d(sinfo, var);
+ atmel_lcdfb_update_dma2d(sinfo, var, info);
}
static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 32f8cf6..1506848 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -845,16 +845,16 @@
{
struct radeonfb_info *rinfo = info->par;
- if ((var->xoffset + var->xres > var->xres_virtual)
- || (var->yoffset + var->yres > var->yres_virtual))
- return -EINVAL;
+ if ((var->xoffset + info->var.xres > info->var.xres_virtual)
+ || (var->yoffset + info->var.yres > info->var.yres_virtual))
+ return -EINVAL;
if (rinfo->asleep)
return 0;
radeon_fifo_wait(2);
- OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
- * var->bits_per_pixel / 8) & ~7);
+ OUTREG(CRTC_OFFSET, (var->yoffset * info->fix.line_length +
+ var->xoffset * info->var.bits_per_pixel / 8) & ~7);
return 0;
}
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 01a8fde..649cb35 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -110,12 +110,6 @@
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct au1100fb_drv_info drv_info;
-
-static int nocursor = 0;
-module_param(nocursor, int, 0644);
-MODULE_PARM_DESC(nocursor, "cursor enable/disable");
-
/* fb_blank
* Blank the screen. Depending on the mode, the screen will be
* activated with the backlight color, or desactivated
@@ -132,7 +126,7 @@
/* Turn on panel */
fbdev->regs->lcd_control |= LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
+ if (fbdev->panel_idx == 1) {
au_writew(au_readw(PB1100_G_CONTROL)
| (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
@@ -147,7 +141,7 @@
/* Turn off panel */
fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx == 1) {
+ if (fbdev->panel_idx == 1) {
au_writew(au_readw(PB1100_G_CONTROL)
& ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
@@ -428,17 +422,6 @@
return 0;
}
-/* fb_cursor
- * Used to disable cursor drawing...
- */
-int au1100fb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
-{
- if (nocursor)
- return 0;
- else
- return -EINVAL; /* just to force soft_cursor() call */
-}
-
static struct fb_ops au1100fb_ops =
{
.owner = THIS_MODULE,
@@ -450,13 +433,53 @@
.fb_imageblit = cfb_imageblit,
.fb_rotate = au1100fb_fb_rotate,
.fb_mmap = au1100fb_fb_mmap,
- .fb_cursor = au1100fb_fb_cursor,
};
/*-------------------------------------------------------------------------*/
-/* AU1100 LCD controller device driver */
+static int au1100fb_setup(struct au1100fb_device *fbdev)
+{
+ char *this_opt, *options;
+ int num_panels = ARRAY_SIZE(known_lcd_panels);
+
+ if (num_panels <= 0) {
+ print_err("No LCD panels supported by driver!");
+ return -ENODEV;
+ }
+
+ if (fb_get_options(DRIVER_NAME, &options))
+ return -ENODEV;
+ if (!options)
+ return -ENODEV;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ /* Panel option */
+ if (!strncmp(this_opt, "panel:", 6)) {
+ int i;
+ this_opt += 6;
+ for (i = 0; i < num_panels; i++) {
+ if (!strncmp(this_opt, known_lcd_panels[i].name,
+ strlen(this_opt))) {
+ fbdev->panel = &known_lcd_panels[i];
+ fbdev->panel_idx = i;
+ break;
+ }
+ }
+ if (i >= num_panels) {
+ print_warn("Panel '%s' not supported!", this_opt);
+ return -ENODEV;
+ }
+ }
+ /* Unsupported option */
+ else
+ print_warn("Unsupported option \"%s\"", this_opt);
+ }
+
+ print_info("Panel=%s", fbdev->panel->name);
+
+ return 0;
+}
static int __devinit au1100fb_drv_probe(struct platform_device *dev)
{
@@ -465,22 +488,21 @@
unsigned long page;
u32 sys_clksrc;
- if (!dev)
- return -EINVAL;
-
/* Allocate new device private */
- if (!(fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
+ fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL);
+ if (!fbdev) {
print_err("fail to allocate device private record");
return -ENOMEM;
}
- fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
+ if (au1100fb_setup(fbdev))
+ goto failed;
platform_set_drvdata(dev, (void *)fbdev);
/* Allocate region for our registers and map them */
- if (!(regs_res = platform_get_resource(to_platform_device(dev),
- IORESOURCE_MEM, 0))) {
+ regs_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!regs_res) {
print_err("fail to retrieve registers resource");
return -EFAULT;
}
@@ -500,13 +522,11 @@
print_dbg("Register memory map at %p", fbdev->regs);
print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
-
-
/* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
(fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
- fbdev->fb_mem = dma_alloc_coherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ fbdev->fb_mem = dma_alloc_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len),
&fbdev->fb_phys, GFP_KERNEL);
if (!fbdev->fb_mem) {
print_err("fail to allocate frambuffer (size: %dK))",
@@ -525,7 +545,7 @@
page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
page += PAGE_SIZE) {
#if CONFIG_DMA_NONCOHERENT
- SetPageReserved(virt_to_page(CAC_ADDR(page)));
+ SetPageReserved(virt_to_page(CAC_ADDR((void *)page)));
#else
SetPageReserved(virt_to_page(page));
#endif
@@ -578,7 +598,8 @@
release_mem_region(fbdev->regs_phys, fbdev->regs_len);
}
if (fbdev->fb_mem) {
- dma_free_noncoherent(dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys);
+ dma_free_noncoherent(&dev->dev, fbdev->fb_len, fbdev->fb_mem,
+ fbdev->fb_phys);
}
if (fbdev->info.cmap.len != 0) {
fb_dealloc_cmap(&fbdev->info.cmap);
@@ -608,7 +629,8 @@
release_mem_region(fbdev->regs_phys, fbdev->regs_len);
- dma_free_coherent(dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys);
+ dma_free_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem,
+ fbdev->fb_phys);
fb_dealloc_cmap(&fbdev->info.cmap);
kfree(fbdev->info.pseudo_palette);
@@ -675,101 +697,18 @@
.resume = au1100fb_drv_resume,
};
-/*-------------------------------------------------------------------------*/
-
-/* Kernel driver */
-
-int au1100fb_setup(char *options)
+static int __init au1100fb_load(void)
{
- char* this_opt;
- int num_panels = ARRAY_SIZE(known_lcd_panels);
- char* mode = NULL;
- int panel_idx = 0;
-
- if (num_panels <= 0) {
- print_err("No LCD panels supported by driver!");
- return -EFAULT;
- }
-
- if (options) {
- while ((this_opt = strsep(&options,",")) != NULL) {
- /* Panel option */
- if (!strncmp(this_opt, "panel:", 6)) {
- int i;
- this_opt += 6;
- for (i = 0; i < num_panels; i++) {
- if (!strncmp(this_opt,
- known_lcd_panels[i].name,
- strlen(this_opt))) {
- panel_idx = i;
- break;
- }
- }
- if (i >= num_panels) {
- print_warn("Panel %s not supported!", this_opt);
- }
- }
- if (!strncmp(this_opt, "nocursor", 8)) {
- this_opt += 8;
- nocursor = 1;
- print_info("Cursor disabled");
- }
- /* Mode option (only option that start with digit) */
- else if (isdigit(this_opt[0])) {
- mode = kstrdup(this_opt, GFP_KERNEL);
- if (!mode) {
- print_err("memory allocation failed");
- return -ENOMEM;
- }
- }
- /* Unsupported option */
- else {
- print_warn("Unsupported option \"%s\"", this_opt);
- }
- }
- }
-
- drv_info.panel_idx = panel_idx;
- drv_info.opt_mode = mode;
-
- print_info("Panel=%s Mode=%s",
- known_lcd_panels[drv_info.panel_idx].name,
- drv_info.opt_mode ? drv_info.opt_mode : "default");
-
- return 0;
-}
-
-int __init au1100fb_init(void)
-{
- char* options;
- int ret;
-
- print_info("" DRIVER_DESC "");
-
- memset(&drv_info, 0, sizeof(drv_info));
-
- if (fb_get_options(DRIVER_NAME, &options))
- return -ENODEV;
-
- /* Setup driver with options */
- ret = au1100fb_setup(options);
- if (ret < 0) {
- print_err("Fail to setup driver");
- return ret;
- }
-
return platform_driver_register(&au1100fb_driver);
}
-void __exit au1100fb_cleanup(void)
+static void __exit au1100fb_unload(void)
{
platform_driver_unregister(&au1100fb_driver);
-
- kfree(drv_info.opt_mode);
}
-module_init(au1100fb_init);
-module_exit(au1100fb_cleanup);
+module_init(au1100fb_load);
+module_exit(au1100fb_unload);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
diff --git a/drivers/video/au1100fb.h b/drivers/video/au1100fb.h
index 164fe2f..12d9642d 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/au1100fb.h
@@ -108,6 +108,7 @@
unsigned char* fb_mem; /* FrameBuffer memory map */
size_t fb_len;
dma_addr_t fb_phys;
+ int panel_idx;
};
/********************************************************************/
@@ -364,11 +365,6 @@
},
};
-struct au1100fb_drv_info {
- int panel_idx;
- char *opt_mode;
-};
-
/********************************************************************/
/* Inline helpers */
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 5dff32a..7200559 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -46,18 +46,10 @@
#include <asm/mach-au1x00/au1000.h>
#include "au1200fb.h"
-#ifdef CONFIG_PM
-#include <asm/mach-au1x00/au1xxx_pm.h>
-#endif
-
-#ifndef CONFIG_FB_AU1200_DEVS
-#define CONFIG_FB_AU1200_DEVS 4
-#endif
-
#define DRIVER_NAME "au1200fb"
#define DRIVER_DESC "LCD controller driver for AU1200 processors"
-#define DEBUG 1
+#define DEBUG 0
#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
@@ -150,7 +142,7 @@
/* Private, per-framebuffer management information (independent of the panel itself) */
struct au1200fb_device {
- struct fb_info fb_info; /* FB driver info record */
+ struct fb_info *fb_info; /* FB driver info record */
int plane;
unsigned char* fb_mem; /* FrameBuffer memory map */
@@ -158,7 +150,6 @@
dma_addr_t fb_phys;
};
-static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
/********************************************************************/
/* LCD controller restrictions */
@@ -171,10 +162,18 @@
/* Default number of visible screen buffer to allocate */
#define AU1200FB_NBR_VIDEO_BUFFERS 1
+/* Default maximum number of fb devices to create */
+#define MAX_DEVICE_COUNT 4
+
+/* Default window configuration entry to use (see windows[]) */
+#define DEFAULT_WINDOW_INDEX 2
+
/********************************************************************/
+static struct fb_info *_au1200fb_infos[MAX_DEVICE_COUNT];
static struct au1200_lcd *lcd = (struct au1200_lcd *) AU1200_LCD_ADDR;
-static int window_index = 2; /* default is zero */
+static int device_count = MAX_DEVICE_COUNT;
+static int window_index = DEFAULT_WINDOW_INDEX; /* default is zero */
static int panel_index = 2; /* default is zero */
static struct window_settings *win;
static struct panel_settings *panel;
@@ -205,12 +204,6 @@
extern int board_au1200fb_panel_init (void);
extern int board_au1200fb_panel_shutdown (void);
-#ifdef CONFIG_PM
-int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
- au1xxx_request_t request, void *data);
-au1xxx_power_dev_t *LCD_pm_dev;
-#endif
-
/*
* Default window configurations
*/
@@ -652,25 +645,6 @@
/********************************************************************/
-#ifdef CONFIG_PM
-static int set_brightness(unsigned int brightness)
-{
- unsigned int hi1, divider;
-
- /* limit brightness pwm duty to >= 30/1600 */
- if (brightness < 30) {
- brightness = 30;
- }
- divider = (lcd->pwmdiv & 0x3FFFF) + 1;
- hi1 = (lcd->pwmhi >> 16) + 1;
- hi1 = (((brightness & 0xFF) + 1) * divider >> 8);
- lcd->pwmhi &= 0xFFFF;
- lcd->pwmhi |= (hi1 << 16);
-
- return brightness;
-}
-#endif /* CONFIG_PM */
-
static int winbpp (unsigned int winctrl1)
{
int bits = 0;
@@ -712,8 +686,8 @@
{
int i;
- for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i) {
- if (fb_info == (struct fb_info *)(&_au1200fb_devices[i].fb_info))
+ for (i = 0; i < device_count; ++i) {
+ if (fb_info == _au1200fb_infos[i])
return i;
}
printk("au1200fb: ERROR: fbinfo2index failed!\n");
@@ -962,7 +936,7 @@
lcd->window[plane].winctrl2 = ( 0
| LCD_WINCTRL2_CKMODE_00
| LCD_WINCTRL2_DBM
- | LCD_WINCTRL2_BX_N( fbdev->fb_info.fix.line_length)
+ | LCD_WINCTRL2_BX_N(fbdev->fb_info->fix.line_length)
| LCD_WINCTRL2_SCX_1
| LCD_WINCTRL2_SCY_1
) ;
@@ -1050,7 +1024,7 @@
static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *fbi)
{
- struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+ struct au1200fb_device *fbdev = fbi->par;
u32 pixclock;
int screen_size, plane;
@@ -1142,7 +1116,7 @@
*/
static int au1200fb_fb_set_par(struct fb_info *fbi)
{
- struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+ struct au1200fb_device *fbdev = fbi->par;
au1200fb_update_fbinfo(fbi);
au1200_setmode(fbdev);
@@ -1246,11 +1220,7 @@
{
unsigned int len;
unsigned long start=0, off;
- struct au1200fb_device *fbdev = (struct au1200fb_device *) info;
-
-#ifdef CONFIG_PM
- au1xxx_pm_access(LCD_pm_dev);
-#endif
+ struct au1200fb_device *fbdev = info->par;
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
@@ -1461,10 +1431,6 @@
int plane;
int val;
-#ifdef CONFIG_PM
- au1xxx_pm_access(LCD_pm_dev);
-#endif
-
plane = fbinfo2index(info);
print_dbg("au1200fb: ioctl %d on plane %d\n", cmd, plane);
@@ -1536,9 +1502,11 @@
.fb_set_par = au1200fb_fb_set_par,
.fb_setcolreg = au1200fb_fb_setcolreg,
.fb_blank = au1200fb_fb_blank,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
+ .fb_fillrect = sys_fillrect,
+ .fb_copyarea = sys_copyarea,
+ .fb_imageblit = sys_imageblit,
+ .fb_read = fb_sys_read,
+ .fb_write = fb_sys_write,
.fb_sync = NULL,
.fb_ioctl = au1200fb_ioctl,
.fb_mmap = au1200fb_fb_mmap,
@@ -1561,10 +1529,9 @@
static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
{
- struct fb_info *fbi = &fbdev->fb_info;
+ struct fb_info *fbi = fbdev->fb_info;
int bpp;
- memset(fbi, 0, sizeof(struct fb_info));
fbi->fbops = &au1200fb_fb_ops;
bpp = winbpp(win->w[fbdev->plane].mode_winctrl1);
@@ -1623,24 +1590,36 @@
/* AU1200 LCD controller device driver */
-static int au1200fb_drv_probe(struct platform_device *dev)
+static int __devinit au1200fb_drv_probe(struct platform_device *dev)
{
struct au1200fb_device *fbdev;
+ struct fb_info *fbi = NULL;
unsigned long page;
- int bpp, plane, ret;
+ int bpp, plane, ret, irq;
- if (!dev)
- return -EINVAL;
+ /* shut gcc up */
+ ret = 0;
+ fbdev = NULL;
- for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
+ /* Kickstart the panel */
+ au1200_setpanel(panel);
+
+ for (plane = 0; plane < device_count; ++plane) {
bpp = winbpp(win->w[plane].mode_winctrl1);
if (win->w[plane].xres == 0)
win->w[plane].xres = panel->Xres;
if (win->w[plane].yres == 0)
win->w[plane].yres = panel->Yres;
- fbdev = &_au1200fb_devices[plane];
- memset(fbdev, 0, sizeof(struct au1200fb_device));
+ fbi = framebuffer_alloc(sizeof(struct au1200fb_device),
+ &dev->dev);
+ if (!fbi)
+ goto failed;
+
+ _au1200fb_infos[plane] = fbi;
+ fbdev = fbi->par;
+ fbdev->fb_info = fbi;
+
fbdev->plane = plane;
/* Allocate the framebuffer to the maximum screen size */
@@ -1673,30 +1652,31 @@
goto failed;
/* Register new framebuffer */
- if ((ret = register_framebuffer(&fbdev->fb_info)) < 0) {
+ ret = register_framebuffer(fbi);
+ if (ret < 0) {
print_err("cannot register new framebuffer");
goto failed;
}
- au1200fb_fb_set_par(&fbdev->fb_info);
+ au1200fb_fb_set_par(fbi);
#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
if (plane == 0)
- if (fb_prepare_logo(&fbdev->fb_info, FB_ROTATE_UR)) {
+ if (fb_prepare_logo(fbi, FB_ROTATE_UR)) {
/* Start display and show logo on boot */
- fb_set_cmap(&fbdev->fb_info.cmap,
- &fbdev->fb_info);
-
- fb_show_logo(&fbdev->fb_info, FB_ROTATE_UR);
+ fb_set_cmap(&fbi->cmap, fbi);
+ fb_show_logo(fbi, FB_ROTATE_UR);
}
#endif
}
/* Now hook interrupt too */
- if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
- IRQF_DISABLED | IRQF_SHARED, "lcd", (void *)dev)) < 0) {
+ irq = platform_get_irq(dev, 0);
+ ret = request_irq(irq, au1200fb_handle_irq,
+ IRQF_SHARED, "lcd", (void *)dev);
+ if (ret) {
print_err("fail to request interrupt line %d (err: %d)",
- AU1200_LCD_INT, ret);
+ irq, ret);
goto failed;
}
@@ -1705,84 +1685,108 @@
failed:
/* NOTE: This only does the current plane/window that failed; others are still active */
if (fbdev->fb_mem)
- dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ dma_free_noncoherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len),
fbdev->fb_mem, fbdev->fb_phys);
- if (fbdev->fb_info.cmap.len != 0)
- fb_dealloc_cmap(&fbdev->fb_info.cmap);
- if (fbdev->fb_info.pseudo_palette)
- kfree(fbdev->fb_info.pseudo_palette);
+ if (fbi) {
+ if (fbi->cmap.len != 0)
+ fb_dealloc_cmap(&fbi->cmap);
+ kfree(fbi->pseudo_palette);
+ }
if (plane == 0)
free_irq(AU1200_LCD_INT, (void*)dev);
return ret;
}
-static int au1200fb_drv_remove(struct platform_device *dev)
+static int __devexit au1200fb_drv_remove(struct platform_device *dev)
{
struct au1200fb_device *fbdev;
+ struct fb_info *fbi;
int plane;
- if (!dev)
- return -ENODEV;
-
/* Turn off the panel */
au1200_setpanel(NULL);
- for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
- {
- fbdev = &_au1200fb_devices[plane];
+ for (plane = 0; plane < device_count; ++plane) {
+ fbi = _au1200fb_infos[plane];
+ fbdev = fbi->par;
/* Clean up all probe data */
- unregister_framebuffer(&fbdev->fb_info);
+ unregister_framebuffer(fbi);
if (fbdev->fb_mem)
dma_free_noncoherent(&dev->dev,
PAGE_ALIGN(fbdev->fb_len),
fbdev->fb_mem, fbdev->fb_phys);
- if (fbdev->fb_info.cmap.len != 0)
- fb_dealloc_cmap(&fbdev->fb_info.cmap);
- if (fbdev->fb_info.pseudo_palette)
- kfree(fbdev->fb_info.pseudo_palette);
+ if (fbi->cmap.len != 0)
+ fb_dealloc_cmap(&fbi->cmap);
+ kfree(fbi->pseudo_palette);
+
+ framebuffer_release(fbi);
+ _au1200fb_infos[plane] = NULL;
}
- free_irq(AU1200_LCD_INT, (void *)dev);
+ free_irq(platform_get_irq(dev, 0), (void *)dev);
return 0;
}
#ifdef CONFIG_PM
-static int au1200fb_drv_suspend(struct platform_device *dev, u32 state)
+static int au1200fb_drv_suspend(struct device *dev)
{
- /* TODO */
+ au1200_setpanel(NULL);
+
+ lcd->outmask = 0;
+ au_sync();
+
return 0;
}
-static int au1200fb_drv_resume(struct platform_device *dev)
+static int au1200fb_drv_resume(struct device *dev)
{
- /* TODO */
+ struct fb_info *fbi;
+ int i;
+
+ /* Kickstart the panel */
+ au1200_setpanel(panel);
+
+ for (i = 0; i < device_count; i++) {
+ fbi = _au1200fb_infos[i];
+ au1200fb_fb_set_par(fbi);
+ }
+
return 0;
}
+
+static const struct dev_pm_ops au1200fb_pmops = {
+ .suspend = au1200fb_drv_suspend,
+ .resume = au1200fb_drv_resume,
+ .freeze = au1200fb_drv_suspend,
+ .thaw = au1200fb_drv_resume,
+};
+
+#define AU1200FB_PMOPS (&au1200fb_pmops)
+
+#else
+#define AU1200FB_PMOPS NULL
#endif /* CONFIG_PM */
static struct platform_driver au1200fb_driver = {
.driver = {
- .name = "au1200-lcd",
- .owner = THIS_MODULE,
+ .name = "au1200-lcd",
+ .owner = THIS_MODULE,
+ .pm = AU1200FB_PMOPS,
},
.probe = au1200fb_drv_probe,
- .remove = au1200fb_drv_remove,
-#ifdef CONFIG_PM
- .suspend = au1200fb_drv_suspend,
- .resume = au1200fb_drv_resume,
-#endif
+ .remove = __devexit_p(au1200fb_drv_remove),
};
/*-------------------------------------------------------------------------*/
/* Kernel driver */
-static void au1200fb_setup(void)
+static int au1200fb_setup(void)
{
- char* options = NULL;
- char* this_opt;
+ char *options = NULL;
+ char *this_opt, *endptr;
int num_panels = ARRAY_SIZE(known_lcd_panels);
int panel_idx = -1;
@@ -1827,70 +1831,42 @@
nohwcursor = 1;
}
+ else if (strncmp(this_opt, "devices:", 8) == 0) {
+ this_opt += 8;
+ device_count = simple_strtol(this_opt,
+ &endptr, 0);
+ if ((device_count < 0) ||
+ (device_count > MAX_DEVICE_COUNT))
+ device_count = MAX_DEVICE_COUNT;
+ }
+
+ else if (strncmp(this_opt, "wincfg:", 7) == 0) {
+ this_opt += 7;
+ window_index = simple_strtol(this_opt,
+ &endptr, 0);
+ if ((window_index < 0) ||
+ (window_index >= ARRAY_SIZE(windows)))
+ window_index = DEFAULT_WINDOW_INDEX;
+ }
+
+ else if (strncmp(this_opt, "off", 3) == 0)
+ return 1;
/* Unsupported option */
else {
print_warn("Unsupported option \"%s\"", this_opt);
}
}
}
+ return 0;
}
-#ifdef CONFIG_PM
-static int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
- au1xxx_request_t request, void *data) {
- int retval = -1;
- unsigned int d = 0;
- unsigned int brightness = 0;
-
- if (request == AU1XXX_PM_SLEEP) {
- board_au1200fb_panel_shutdown();
- }
- else if (request == AU1XXX_PM_WAKEUP) {
- if(dev->prev_state == SLEEP_STATE)
- {
- int plane;
- au1200_setpanel(panel);
- for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
- struct au1200fb_device *fbdev;
- fbdev = &_au1200fb_devices[plane];
- au1200fb_fb_set_par(&fbdev->fb_info);
- }
- }
-
- d = *((unsigned int*)data);
- if(d <=10) brightness = 26;
- else if(d<=20) brightness = 51;
- else if(d<=30) brightness = 77;
- else if(d<=40) brightness = 102;
- else if(d<=50) brightness = 128;
- else if(d<=60) brightness = 153;
- else if(d<=70) brightness = 179;
- else if(d<=80) brightness = 204;
- else if(d<=90) brightness = 230;
- else brightness = 255;
- set_brightness(brightness);
- } else if (request == AU1XXX_PM_GETSTATUS) {
- return dev->cur_state;
- } else if (request == AU1XXX_PM_ACCESS) {
- if (dev->cur_state != SLEEP_STATE)
- return retval;
- else {
- au1200_setpanel(panel);
- }
- } else if (request == AU1XXX_PM_IDLE) {
- } else if (request == AU1XXX_PM_CLEANUP) {
- }
-
- return retval;
-}
-#endif
-
static int __init au1200fb_init(void)
{
print_info("" DRIVER_DESC "");
/* Setup driver with options */
- au1200fb_setup();
+ if (au1200fb_setup())
+ return -ENODEV;
/* Point to the panel selected */
panel = &known_lcd_panels[panel_index];
@@ -1899,17 +1875,6 @@
printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
- /* Kickstart the panel, the framebuffers/windows come soon enough */
- au1200_setpanel(panel);
-
- #ifdef CONFIG_PM
- LCD_pm_dev = new_au1xxx_power_device("LCD", &au1200fb_pm_callback, NULL);
- if ( LCD_pm_dev == NULL)
- printk(KERN_INFO "Unable to create a power management device entry for the au1200fb.\n");
- else
- printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n");
- #endif
-
return platform_driver_register(&au1200fb_driver);
}
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 183b6f6..66bc74d 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pm.h>
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index d06886a..6c68a68 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pm.h>
@@ -932,7 +931,6 @@
out1:
backlight_device_unregister(bl);
out2:
- i2c_set_clientdata(client, NULL);
kfree(data);
return ret;
@@ -952,7 +950,6 @@
&adp8870_bl_attr_group);
backlight_device_unregister(data->bl);
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
diff --git a/drivers/video/backlight/generic_bl.c b/drivers/video/backlight/generic_bl.c
index 8c6befd..adb1914 100644
--- a/drivers/video/backlight/generic_bl.c
+++ b/drivers/video/backlight/generic_bl.c
@@ -56,7 +56,7 @@
* Called when the battery is low to limit the backlight intensity.
* If limit==0 clear any limit, otherwise limit the intensity
*/
-void corgibl_limit_intensity(int limit)
+void genericbl_limit_intensity(int limit)
{
struct backlight_device *bd = generic_backlight_device;
@@ -68,7 +68,7 @@
backlight_update_status(generic_backlight_device);
mutex_unlock(&bd->ops_lock);
}
-EXPORT_SYMBOL(corgibl_limit_intensity);
+EXPORT_SYMBOL(genericbl_limit_intensity);
static const struct backlight_ops genericbl_ops = {
.options = BL_CORE_SUSPENDRESUME,
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 98ad3e5..3543f1b 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -52,15 +52,11 @@
dev_dbg(&spi->dev, "initializing LCD\n");
- if (priv->io_reg) {
- regulator_set_voltage(priv->io_reg, 1800000, 1800000);
- regulator_enable(priv->io_reg);
- }
+ regulator_set_voltage(priv->io_reg, 1800000, 1800000);
+ regulator_enable(priv->io_reg);
- if (priv->core_reg) {
- regulator_set_voltage(priv->core_reg, 2800000, 2800000);
- regulator_enable(priv->core_reg);
- }
+ regulator_set_voltage(priv->core_reg, 2800000, 2800000);
+ regulator_enable(priv->core_reg);
l4f00242t03_reset(pdata->reset_gpio);
@@ -78,11 +74,8 @@
gpio_set_value(pdata->data_enable_gpio, 0);
- if (priv->io_reg)
- regulator_disable(priv->io_reg);
-
- if (priv->core_reg)
- regulator_disable(priv->core_reg);
+ regulator_disable(priv->io_reg);
+ regulator_disable(priv->core_reg);
}
static int l4f00242t03_lcd_power_get(struct lcd_device *ld)
@@ -178,47 +171,34 @@
priv->spi = spi;
- ret = gpio_request(pdata->reset_gpio, "lcd l4f00242t03 reset");
+ ret = gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH,
+ "lcd l4f00242t03 reset");
if (ret) {
dev_err(&spi->dev,
"Unable to get the lcd l4f00242t03 reset gpio.\n");
goto err;
}
- ret = gpio_direction_output(pdata->reset_gpio, 1);
- if (ret)
- goto err2;
-
- ret = gpio_request(pdata->data_enable_gpio,
- "lcd l4f00242t03 data enable");
+ ret = gpio_request_one(pdata->data_enable_gpio, GPIOF_OUT_INIT_LOW,
+ "lcd l4f00242t03 data enable");
if (ret) {
dev_err(&spi->dev,
"Unable to get the lcd l4f00242t03 data en gpio.\n");
goto err2;
}
- ret = gpio_direction_output(pdata->data_enable_gpio, 0);
- if (ret)
+ priv->io_reg = regulator_get(&spi->dev, "vdd");
+ if (IS_ERR(priv->io_reg)) {
+ dev_err(&spi->dev, "%s: Unable to get the IO regulator\n",
+ __func__);
goto err3;
-
- if (pdata->io_supply) {
- priv->io_reg = regulator_get(NULL, pdata->io_supply);
-
- if (IS_ERR(priv->io_reg)) {
- pr_err("%s: Unable to get the IO regulator\n",
- __func__);
- goto err3;
- }
}
- if (pdata->core_supply) {
- priv->core_reg = regulator_get(NULL, pdata->core_supply);
-
- if (IS_ERR(priv->core_reg)) {
- pr_err("%s: Unable to get the core regulator\n",
- __func__);
- goto err4;
- }
+ priv->core_reg = regulator_get(&spi->dev, "vcore");
+ if (IS_ERR(priv->core_reg)) {
+ dev_err(&spi->dev, "%s: Unable to get the core regulator\n",
+ __func__);
+ goto err4;
}
priv->ld = lcd_device_register("l4f00242t03",
@@ -238,11 +218,9 @@
return 0;
err5:
- if (priv->core_reg)
- regulator_put(priv->core_reg);
+ regulator_put(priv->core_reg);
err4:
- if (priv->io_reg)
- regulator_put(priv->io_reg);
+ regulator_put(priv->io_reg);
err3:
gpio_free(pdata->data_enable_gpio);
err2:
@@ -266,10 +244,8 @@
gpio_free(pdata->data_enable_gpio);
gpio_free(pdata->reset_gpio);
- if (priv->io_reg)
- regulator_put(priv->io_reg);
- if (priv->core_reg)
- regulator_put(priv->core_reg);
+ regulator_put(priv->io_reg);
+ regulator_put(priv->core_reg);
kfree(priv);
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 2464b91..56720fb 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -633,7 +633,7 @@
goto out7;
}
- if (request_irq(info->irq, bfin_bf54x_irq_error, IRQF_DISABLED,
+ if (request_irq(info->irq, bfin_bf54x_irq_error, 0,
"PPI ERROR", info) < 0) {
printk(KERN_ERR DRIVER_NAME
": unable to request PPI ERROR IRQ\n");
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index 23b6c4b..c633068 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -695,7 +695,7 @@
goto out7;
}
- ret = request_irq(info->irq, bfin_lq035q1_irq_error, IRQF_DISABLED,
+ ret = request_irq(info->irq, bfin_lq035q1_irq_error, 0,
DRIVER_NAME" PPI ERROR", info);
if (ret < 0) {
dev_err(&pdev->dev, "unable to request PPI ERROR IRQ\n");
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index d8de29f..d5e1267 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -529,7 +529,7 @@
goto out7;
}
- ret = request_irq(info->irq, bfin_t350mcqb_irq_error, IRQF_DISABLED,
+ ret = request_irq(info->irq, bfin_t350mcqb_irq_error, 0,
"PPI ERROR", info);
if (ret < 0) {
printk(KERN_ERR DRIVER_NAME
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
index 8486f54..811dd7f 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/bfin_adv7393fb.c
@@ -481,7 +481,7 @@
goto out_4;
}
- if (request_irq(IRQ_PPI_ERROR, ppi_irq_error, IRQF_DISABLED,
+ if (request_irq(IRQ_PPI_ERROR, ppi_irq_error, 0,
"PPI ERROR", fbdev) < 0) {
dev_err(&client->dev, "unable to request PPI ERROR IRQ\n");
ret = -EFAULT;
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index caaa27d..cb09aa1f 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -32,11 +32,11 @@
#define CARMINEFB_DEFAULT_VIDEO_MODE 1
static unsigned int fb_mode = CARMINEFB_DEFAULT_VIDEO_MODE;
-module_param(fb_mode, uint, 444);
+module_param(fb_mode, uint, 0444);
MODULE_PARM_DESC(fb_mode, "Initial video mode as integer.");
static char *fb_mode_str;
-module_param(fb_mode_str, charp, 444);
+module_param(fb_mode_str, charp, 0444);
MODULE_PARM_DESC(fb_mode_str, "Initial video mode in characters.");
/*
@@ -46,7 +46,7 @@
* 0b010 Display 1
*/
static int fb_displays = CARMINE_USE_DISPLAY0 | CARMINE_USE_DISPLAY1;
-module_param(fb_displays, int, 444);
+module_param(fb_displays, int, 0444);
MODULE_PARM_DESC(fb_displays, "Bit mode, which displays are used");
struct carmine_hw {
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 9075bea5..7b2c40a 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -550,7 +550,7 @@
/*
- * Parse user speficied options (`video=controlfb:')
+ * Parse user specified options (`video=controlfb:')
*/
static void __init control_setup(char *options)
{
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index fcdac87..55f91d9 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -35,6 +35,9 @@
#define DRIVER_NAME "da8xx_lcdc"
+#define LCD_VERSION_1 1
+#define LCD_VERSION_2 2
+
/* LCD Status Register */
#define LCD_END_OF_FRAME1 BIT(9)
#define LCD_END_OF_FRAME0 BIT(8)
@@ -49,7 +52,9 @@
#define LCD_DMA_BURST_4 0x2
#define LCD_DMA_BURST_8 0x3
#define LCD_DMA_BURST_16 0x4
-#define LCD_END_OF_FRAME_INT_ENA BIT(2)
+#define LCD_V1_END_OF_FRAME_INT_ENA BIT(2)
+#define LCD_V2_END_OF_FRAME0_INT_ENA BIT(8)
+#define LCD_V2_END_OF_FRAME1_INT_ENA BIT(9)
#define LCD_DUAL_FRAME_BUFFER_ENABLE BIT(0)
/* LCD Control Register */
@@ -65,12 +70,18 @@
#define LCD_MONO_8BIT_MODE BIT(9)
#define LCD_RASTER_ORDER BIT(8)
#define LCD_TFT_MODE BIT(7)
-#define LCD_UNDERFLOW_INT_ENA BIT(6)
-#define LCD_PL_ENABLE BIT(4)
+#define LCD_V1_UNDERFLOW_INT_ENA BIT(6)
+#define LCD_V2_UNDERFLOW_INT_ENA BIT(5)
+#define LCD_V1_PL_INT_ENA BIT(4)
+#define LCD_V2_PL_INT_ENA BIT(6)
#define LCD_MONOCHROME_MODE BIT(1)
#define LCD_RASTER_ENABLE BIT(0)
#define LCD_TFT_ALT_ENABLE BIT(23)
#define LCD_STN_565_ENABLE BIT(24)
+#define LCD_V2_DMA_CLK_EN BIT(2)
+#define LCD_V2_LIDD_CLK_EN BIT(1)
+#define LCD_V2_CORE_CLK_EN BIT(0)
+#define LCD_V2_LPP_B10 26
/* LCD Raster Timing 2 Register */
#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16)
@@ -82,6 +93,7 @@
#define LCD_INVERT_FRAME_CLOCK BIT(20)
/* LCD Block */
+#define LCD_PID_REG 0x0
#define LCD_CTRL_REG 0x4
#define LCD_STAT_REG 0x8
#define LCD_RASTER_CTRL_REG 0x28
@@ -94,6 +106,17 @@
#define LCD_DMA_FRM_BUF_BASE_ADDR_1_REG 0x4C
#define LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG 0x50
+/* Interrupt Registers available only in Version 2 */
+#define LCD_RAW_STAT_REG 0x58
+#define LCD_MASKED_STAT_REG 0x5c
+#define LCD_INT_ENABLE_SET_REG 0x60
+#define LCD_INT_ENABLE_CLR_REG 0x64
+#define LCD_END_OF_INT_IND_REG 0x68
+
+/* Clock registers available only on Version 2 */
+#define LCD_CLK_ENABLE_REG 0x6c
+#define LCD_CLK_RESET_REG 0x70
+
#define LCD_NUM_BUFFERS 2
#define WSI_TIMEOUT 50
@@ -105,6 +128,8 @@
static resource_size_t da8xx_fb_reg_base;
static struct resource *lcdc_regs;
+static unsigned int lcd_revision;
+static irq_handler_t lcdc_irq_handler;
static inline unsigned int lcdc_read(unsigned int addr)
{
@@ -240,6 +265,7 @@
u32 end;
u32 reg_ras;
u32 reg_dma;
+ u32 reg_int;
/* init reg to clear PLM (loading mode) fields */
reg_ras = lcdc_read(LCD_RASTER_CTRL_REG);
@@ -252,7 +278,14 @@
end = par->dma_end;
reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
- reg_dma |= LCD_END_OF_FRAME_INT_ENA;
+ if (lcd_revision == LCD_VERSION_1) {
+ reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA;
+ } else {
+ reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
+ LCD_V2_END_OF_FRAME0_INT_ENA |
+ LCD_V2_END_OF_FRAME1_INT_ENA;
+ lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
+ }
reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
@@ -264,7 +297,14 @@
end = start + par->palette_sz - 1;
reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
- reg_ras |= LCD_PL_ENABLE;
+
+ if (lcd_revision == LCD_VERSION_1) {
+ reg_ras |= LCD_V1_PL_INT_ENA;
+ } else {
+ reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
+ LCD_V2_PL_INT_ENA;
+ lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
+ }
lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
@@ -348,6 +388,7 @@
static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
{
u32 reg;
+ u32 reg_int;
reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(LCD_TFT_MODE |
LCD_MONO_8BIT_MODE |
@@ -375,7 +416,13 @@
}
/* enable additional interrupts here */
- reg |= LCD_UNDERFLOW_INT_ENA;
+ if (lcd_revision == LCD_VERSION_1) {
+ reg |= LCD_V1_UNDERFLOW_INT_ENA;
+ } else {
+ reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
+ LCD_V2_UNDERFLOW_INT_ENA;
+ lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
+ }
lcdc_write(reg, LCD_RASTER_CTRL_REG);
@@ -413,18 +460,43 @@
/* Set the Panel Width */
/* Pixels per line = (PPL + 1)*16 */
- /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/
- width &= 0x3f0;
+ if (lcd_revision == LCD_VERSION_1) {
+ /*
+ * 0x3F in bits 4..9 gives max horizontal resolution = 1024
+ * pixels.
+ */
+ width &= 0x3f0;
+ } else {
+ /*
+ * 0x7F in bits 4..10 gives max horizontal resolution = 2048
+ * pixels.
+ */
+ width &= 0x7f0;
+ }
+
reg = lcdc_read(LCD_RASTER_TIMING_0_REG);
reg &= 0xfffffc00;
- reg |= ((width >> 4) - 1) << 4;
+ if (lcd_revision == LCD_VERSION_1) {
+ reg |= ((width >> 4) - 1) << 4;
+ } else {
+ width = (width >> 4) - 1;
+ reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3);
+ }
lcdc_write(reg, LCD_RASTER_TIMING_0_REG);
/* Set the Panel Height */
+ /* Set bits 9:0 of Lines Per Pixel */
reg = lcdc_read(LCD_RASTER_TIMING_1_REG);
reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
lcdc_write(reg, LCD_RASTER_TIMING_1_REG);
+ /* Set bit 10 of Lines Per Pixel */
+ if (lcd_revision == LCD_VERSION_2) {
+ reg = lcdc_read(LCD_RASTER_TIMING_2_REG);
+ reg |= ((height - 1) & 0x400) << 16;
+ lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
+ }
+
/* Set the Raster Order of the Frame Buffer */
reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(1 << 8);
if (raster_order)
@@ -511,6 +583,9 @@
/* DMA has to be disabled */
lcdc_write(0, LCD_DMA_CTRL_REG);
lcdc_write(0, LCD_RASTER_CTRL_REG);
+
+ if (lcd_revision == LCD_VERSION_2)
+ lcdc_write(0, LCD_INT_ENABLE_SET_REG);
}
static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
@@ -523,6 +598,11 @@
/* Configure the LCD clock divisor. */
lcdc_write(LCD_CLK_DIVISOR(div) |
(LCD_RASTER_MODE & 0x1), LCD_CTRL_REG);
+
+ if (lcd_revision == LCD_VERSION_2)
+ lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
+ LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG);
+
}
static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
@@ -583,7 +663,63 @@
return 0;
}
-static irqreturn_t lcdc_irq_handler(int irq, void *arg)
+/* IRQ handler for version 2 of LCDC */
+static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
+{
+ struct da8xx_fb_par *par = arg;
+ u32 stat = lcdc_read(LCD_MASKED_STAT_REG);
+ u32 reg_int;
+
+ if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
+ lcd_disable_raster();
+ lcdc_write(stat, LCD_MASKED_STAT_REG);
+ lcd_enable_raster();
+ } else if (stat & LCD_PL_LOAD_DONE) {
+ /*
+ * Must disable raster before changing state of any control bit.
+ * And also must be disabled before clearing the PL loading
+ * interrupt via the following write to the status register. If
+ * this is done after then one gets multiple PL done interrupts.
+ */
+ lcd_disable_raster();
+
+ lcdc_write(stat, LCD_MASKED_STAT_REG);
+
+ /* Disable PL completion inerrupt */
+ reg_int = lcdc_read(LCD_INT_ENABLE_CLR_REG) |
+ (LCD_V2_PL_INT_ENA);
+ lcdc_write(reg_int, LCD_INT_ENABLE_CLR_REG);
+
+ /* Setup and start data loading mode */
+ lcd_blit(LOAD_DATA, par);
+ } else {
+ lcdc_write(stat, LCD_MASKED_STAT_REG);
+
+ if (stat & LCD_END_OF_FRAME0) {
+ lcdc_write(par->dma_start,
+ LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+ lcdc_write(par->dma_end,
+ LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+ par->vsync_flag = 1;
+ wake_up_interruptible(&par->vsync_wait);
+ }
+
+ if (stat & LCD_END_OF_FRAME1) {
+ lcdc_write(par->dma_start,
+ LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
+ lcdc_write(par->dma_end,
+ LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+ par->vsync_flag = 1;
+ wake_up_interruptible(&par->vsync_wait);
+ }
+ }
+
+ lcdc_write(0, LCD_END_OF_INT_IND_REG);
+ return IRQ_HANDLED;
+}
+
+/* IRQ handler for version 1 LCDC */
+static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg)
{
struct da8xx_fb_par *par = arg;
u32 stat = lcdc_read(LCD_STAT_REG);
@@ -606,7 +742,7 @@
/* Disable PL completion inerrupt */
reg_ras = lcdc_read(LCD_RASTER_CTRL_REG);
- reg_ras &= ~LCD_PL_ENABLE;
+ reg_ras &= ~LCD_V1_PL_INT_ENA;
lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
/* Setup and start data loading mode */
@@ -877,8 +1013,8 @@
start = fix->smem_start +
new_var.yoffset * fix->line_length +
- new_var.xoffset * var->bits_per_pixel / 8;
- end = start + var->yres * fix->line_length - 1;
+ new_var.xoffset * fbi->var.bits_per_pixel / 8;
+ end = start + fbi->var.yres * fix->line_length - 1;
par->dma_start = start;
par->dma_end = end;
}
@@ -945,6 +1081,22 @@
if (ret)
goto err_clk_put;
+ /* Determine LCD IP Version */
+ switch (lcdc_read(LCD_PID_REG)) {
+ case 0x4C100102:
+ lcd_revision = LCD_VERSION_1;
+ break;
+ case 0x4F200800:
+ lcd_revision = LCD_VERSION_2;
+ break;
+ default:
+ dev_warn(&device->dev, "Unknown PID Reg value 0x%x, "
+ "defaulting to LCD revision 1\n",
+ lcdc_read(LCD_PID_REG));
+ lcd_revision = LCD_VERSION_1;
+ break;
+ }
+
for (i = 0, lcdc_info = known_lcd_panels;
i < ARRAY_SIZE(known_lcd_panels);
i++, lcdc_info++) {
@@ -1085,7 +1237,13 @@
}
#endif
- ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+ if (lcd_revision == LCD_VERSION_1)
+ lcdc_irq_handler = lcdc_irq_handler_rev01;
+ else
+ lcdc_irq_handler = lcdc_irq_handler_rev02;
+
+ ret = request_irq(par->irq, lcdc_irq_handler, 0,
+ DRIVER_NAME, par);
if (ret)
goto irq_freq;
return 0;
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
index 27f2c57..60a787f 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fb-puv3.c
@@ -624,8 +624,8 @@
|| var->xoffset)
return -EINVAL;
} else {
- if (var->xoffset + var->xres > info->var.xres_virtual ||
- var->yoffset + var->yres > info->var.yres_virtual)
+ if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+ var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
}
info->var.xoffset = var->xoffset;
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 32814e8..c27e153 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -223,8 +223,7 @@
int i;
BUG_ON(!fbdefio);
- cancel_delayed_work(&info->deferred_work);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&info->deferred_work);
/* clear out the mapping that we setup */
for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 5aac00e..ad93629 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1738,8 +1738,6 @@
{
struct fb_event event;
- if (!lock_fb_info(info))
- return;
event.info = info;
if (state) {
fb_notifier_call_chain(FB_EVENT_SUSPEND, &event);
@@ -1748,7 +1746,6 @@
info->state = FBINFO_STATE_RUNNING;
fb_notifier_call_chain(FB_EVENT_RESUME, &event);
}
- unlock_fb_info(info);
}
/**
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 4f57485..cef6557 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -493,7 +493,8 @@
return num;
}
-static int get_std_timing(unsigned char *block, struct fb_videomode *mode)
+static int get_std_timing(unsigned char *block, struct fb_videomode *mode,
+ int ver, int rev)
{
int xres, yres = 0, refresh, ratio, i;
@@ -504,7 +505,11 @@
ratio = (block[1] & 0xc0) >> 6;
switch (ratio) {
case 0:
- yres = xres;
+ /* in EDID 1.3 the meaning of 0 changed to 16:10 (prior 1:1) */
+ if (ver < 1 || (ver == 1 && rev < 3))
+ yres = xres;
+ else
+ yres = (xres * 10)/16;
break;
case 1:
yres = (xres * 3)/4;
@@ -533,12 +538,12 @@
}
static int get_dst_timing(unsigned char *block,
- struct fb_videomode *mode)
+ struct fb_videomode *mode, int ver, int rev)
{
int j, num = 0;
for (j = 0; j < 6; j++, block += STD_TIMING_DESCRIPTION_SIZE)
- num += get_std_timing(block, &mode[num]);
+ num += get_std_timing(block, &mode[num], ver, rev);
return num;
}
@@ -599,6 +604,10 @@
struct fb_videomode *mode, *m;
unsigned char *block;
int num = 0, i, first = 1;
+ int ver, rev;
+
+ ver = edid[EDID_STRUCT_VERSION];
+ rev = edid[EDID_STRUCT_REVISION];
mode = kzalloc(50 * sizeof(struct fb_videomode), GFP_KERNEL);
if (mode == NULL)
@@ -632,12 +641,12 @@
DPRINTK(" Standard Timings\n");
block = edid + STD_TIMING_DESCRIPTIONS_START;
for (i = 0; i < STD_TIMING; i++, block += STD_TIMING_DESCRIPTION_SIZE)
- num += get_std_timing(block, &mode[num]);
+ num += get_std_timing(block, &mode[num], ver, rev);
block = edid + DETAILED_TIMING_DESCRIPTIONS_START;
for (i = 0; i < 4; i++, block+= DETAILED_TIMING_DESCRIPTION_SIZE) {
if (block[0] == 0x00 && block[1] == 0x00 && block[3] == 0xfa)
- num += get_dst_timing(block + 5, &mode[num]);
+ num += get_dst_timing(block + 5, &mode[num], ver, rev);
}
/* Yikes, EDID data is totally useless */
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index 04251ce8..67afa9c 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -399,9 +399,12 @@
state = simple_strtoul(buf, &last, 0);
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
console_lock();
fb_set_suspend(fb_info, (int)state);
console_unlock();
+ unlock_fb_info(fb_info);
return count;
}
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 0acc7d6..a16beeb5 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -30,37 +30,40 @@
#include <linux/clk.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
-
-#include <linux/of_platform.h>
+#include <linux/spinlock.h>
#include <sysdev/fsl_soc.h>
#include <linux/fsl-diu-fb.h>
#include "edid.h"
-/*
- * These parameters give default parameters
- * for video output 1024x768,
- * FIXME - change timing to proper amounts
- * hsync 31.5kHz, vsync 60Hz
- */
-static struct fb_videomode __devinitdata fsl_diu_default_mode = {
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15385,
- .left_margin = 160,
- .right_margin = 24,
- .upper_margin = 29,
- .lower_margin = 3,
- .hsync_len = 136,
- .vsync_len = 6,
- .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED
+#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */
+ /* 1 for plane 0, 2 for plane 1&2 each */
+
+/* HW cursor parameters */
+#define MAX_CURS 32
+
+/* INT_STATUS/INT_MASK field descriptions */
+#define INT_VSYNC 0x01 /* Vsync interrupt */
+#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */
+#define INT_UNDRUN 0x04 /* Under run exception interrupt */
+#define INT_PARERR 0x08 /* Display parameters error interrupt */
+#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */
+
+struct diu_addr {
+ void *vaddr; /* Virtual address */
+ dma_addr_t paddr; /* Physical address */
+ __u32 offset;
};
+/*
+ * List of supported video modes
+ *
+ * The first entry is the default video mode. The remain entries are in
+ * order if increasing resolution and frequency. The 320x240-60 mode is
+ * the initial AOI for the second and third planes.
+ */
static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
{
- .name = "1024x768-60",
.refresh = 60,
.xres = 1024,
.yres = 768,
@@ -75,7 +78,132 @@
.vmode = FB_VMODE_NONINTERLACED
},
{
- .name = "1024x768-70",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 79440,
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 16,
+ .lower_margin = 5,
+ .hsync_len = 48,
+ .vsync_len = 1,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39722,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 72,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 32052,
+ .left_margin = 128,
+ .right_margin = 24,
+ .upper_margin = 28,
+ .lower_margin = 9,
+ .hsync_len = 40,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 75,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 31747,
+ .left_margin = 120,
+ .right_margin = 16,
+ .upper_margin = 16,
+ .lower_margin = 1,
+ .hsync_len = 64,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 90,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 25057,
+ .left_margin = 120,
+ .right_margin = 32,
+ .upper_margin = 14,
+ .lower_margin = 25,
+ .hsync_len = 40,
+ .vsync_len = 14,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 100,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 22272,
+ .left_margin = 48,
+ .right_margin = 32,
+ .upper_margin = 17,
+ .lower_margin = 22,
+ .hsync_len = 128,
+ .vsync_len = 12,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 33805,
+ .left_margin = 96,
+ .right_margin = 24,
+ .upper_margin = 10,
+ .lower_margin = 3,
+ .hsync_len = 72,
+ .vsync_len = 7,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 25000,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 23,
+ .lower_margin = 1,
+ .hsync_len = 128,
+ .vsync_len = 4,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 854,
+ .yres = 480,
+ .pixclock = 31518,
+ .left_margin = 104,
+ .right_margin = 16,
+ .upper_margin = 13,
+ .lower_margin = 1,
+ .hsync_len = 88,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
.refresh = 70,
.xres = 1024,
.yres = 768,
@@ -90,7 +218,6 @@
.vmode = FB_VMODE_NONINTERLACED
},
{
- .name = "1024x768-75",
.refresh = 75,
.xres = 1024,
.yres = 768,
@@ -105,7 +232,34 @@
.vmode = FB_VMODE_NONINTERLACED
},
{
- .name = "1280x1024-60",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 480,
+ .pixclock = 18939,
+ .left_margin = 353,
+ .right_margin = 47,
+ .upper_margin = 39,
+ .lower_margin = 4,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 720,
+ .pixclock = 13426,
+ .left_margin = 192,
+ .right_margin = 64,
+ .upper_margin = 22,
+ .lower_margin = 1,
+ .hsync_len = 136,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
.refresh = 60,
.xres = 1280,
.yres = 1024,
@@ -120,7 +274,6 @@
.vmode = FB_VMODE_NONINTERLACED
},
{
- .name = "1280x1024-70",
.refresh = 70,
.xres = 1280,
.yres = 1024,
@@ -135,7 +288,6 @@
.vmode = FB_VMODE_NONINTERLACED
},
{
- .name = "1280x1024-75",
.refresh = 75,
.xres = 1280,
.yres = 1024,
@@ -150,40 +302,25 @@
.vmode = FB_VMODE_NONINTERLACED
},
{
- .name = "320x240", /* for AOI only */
.refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = 15385,
- .left_margin = 0,
- .right_margin = 0,
- .upper_margin = 0,
- .lower_margin = 0,
- .hsync_len = 0,
- .vsync_len = 0,
- .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED
- },
- {
- .name = "1280x480-60",
- .refresh = 60,
- .xres = 1280,
- .yres = 480,
- .pixclock = 18939,
- .left_margin = 353,
- .right_margin = 47,
- .upper_margin = 39,
- .lower_margin = 4,
- .hsync_len = 8,
- .vsync_len = 2,
+ .xres = 1920,
+ .yres = 1080,
+ .pixclock = 5787,
+ .left_margin = 328,
+ .right_margin = 120,
+ .upper_margin = 34,
+ .lower_margin = 1,
+ .hsync_len = 208,
+ .vsync_len = 3,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
};
-static char *fb_mode = "1024x768-32@60";
+static char *fb_mode;
static unsigned long default_bpp = 32;
-static int monitor_port;
+static enum fsl_diu_monitor_port monitor_port;
+static char *monitor_string;
#if defined(CONFIG_NOT_COHERENT_CACHE)
static u8 *coherence_data;
@@ -201,15 +338,27 @@
void *dummy_aoi_virt;
unsigned int irq;
int fb_enabled;
- int monitor_port;
+ enum fsl_diu_monitor_port monitor_port;
+ struct diu __iomem *diu_reg;
+ spinlock_t reg_lock;
+ struct diu_addr ad;
+ struct diu_addr gamma;
+ struct diu_addr pallete;
+ struct diu_addr cursor;
+};
+
+enum mfb_index {
+ PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */
+ PLANE1_AOI0, /* Plane 1, first AOI */
+ PLANE1_AOI1, /* Plane 1, second AOI */
+ PLANE2_AOI0, /* Plane 2, first AOI */
+ PLANE2_AOI1, /* Plane 2, second AOI */
};
struct mfb_info {
- int index;
- int type;
+ enum mfb_index index;
char *id;
int registered;
- int blank;
unsigned long pseudo_palette[16];
struct diu_ad *ad;
int cursor_reset;
@@ -223,63 +372,82 @@
static struct mfb_info mfb_template[] = {
- { /* AOI 0 for plane 0 */
- .index = 0,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel0",
- .registered = 0,
- .count = 0,
- .x_aoi_d = 0,
- .y_aoi_d = 0,
+ {
+ .index = PLANE0,
+ .id = "Panel0",
+ .registered = 0,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
},
- { /* AOI 0 for plane 1 */
- .index = 1,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel1 AOI0",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 0,
- .y_aoi_d = 0,
+ {
+ .index = PLANE1_AOI0,
+ .id = "Panel1 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
},
- { /* AOI 1 for plane 1 */
- .index = 2,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel1 AOI1",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 0,
- .y_aoi_d = 480,
+ {
+ .index = PLANE1_AOI1,
+ .id = "Panel1 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 480,
},
- { /* AOI 0 for plane 2 */
- .index = 3,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel2 AOI0",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 640,
- .y_aoi_d = 0,
+ {
+ .index = PLANE2_AOI0,
+ .id = "Panel2 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 0,
},
- { /* AOI 1 for plane 2 */
- .index = 4,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel2 AOI1",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 640,
- .y_aoi_d = 480,
+ {
+ .index = PLANE2_AOI1,
+ .id = "Panel2 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 480,
},
};
-static struct diu_hw dr = {
- .mode = MFB_MODE1,
- .reg_lock = __SPIN_LOCK_UNLOCKED(diu_hw.reg_lock),
-};
+/**
+ * fsl_diu_name_to_port - convert a port name to a monitor port enum
+ *
+ * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns
+ * the enum fsl_diu_monitor_port that corresponds to that string.
+ *
+ * For compatibility with older versions, a number ("0", "1", or "2") is also
+ * supported.
+ *
+ * If the string is unknown, DVI is assumed.
+ *
+ * If the particular port is not supported by the platform, another port
+ * (platform-specific) is chosen instead.
+ */
+static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
+{
+ enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI;
+ unsigned long val;
-static struct diu_pool pool;
+ if (s) {
+ if (!strict_strtoul(s, 10, &val) && (val <= 2))
+ port = (enum fsl_diu_monitor_port) val;
+ else if (strncmp(s, "lvds", 4) == 0)
+ port = FSL_DIU_PORT_LVDS;
+ else if (strncmp(s, "dlvds", 5) == 0)
+ port = FSL_DIU_PORT_DLVDS;
+ }
+
+ return diu_ops.valid_monitor_port(port);
+}
/**
* fsl_diu_alloc - allocate memory for the DIU
@@ -292,14 +460,9 @@
{
void *virt;
- pr_debug("size=%zu\n", size);
-
virt = alloc_pages_exact(size, GFP_DMA | __GFP_ZERO);
- if (virt) {
+ if (virt)
*phys = virt_to_phys(virt);
- pr_debug("virt=%p phys=%llx\n", virt,
- (unsigned long long)*phys);
- }
return virt;
}
@@ -313,8 +476,6 @@
*/
static void fsl_diu_free(void *virt, size_t size)
{
- pr_debug("virt=%p size=%zu\n", virt, size);
-
if (virt && size)
free_pages_exact(virt, size);
}
@@ -330,82 +491,72 @@
} while (in_be32(reg) != val);
}
-static int fsl_diu_enable_panel(struct fb_info *info)
+static void fsl_diu_enable_panel(struct fb_info *info)
{
struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
- struct diu *hw = dr.diu_reg;
struct diu_ad *ad = mfbi->ad;
struct fsl_diu_data *machine_data = mfbi->parent;
- int res = 0;
-
- pr_debug("enable_panel index %d\n", mfbi->index);
- if (mfbi->type != MFB_TYPE_OFF) {
- switch (mfbi->index) {
- case 0: /* plane 0 */
- if (hw->desc[0] != ad->paddr)
- wr_reg_wa(&hw->desc[0], ad->paddr);
- break;
- case 1: /* plane 1 AOI 0 */
- cmfbi = machine_data->fsl_diu_info[2]->par;
- if (hw->desc[1] != ad->paddr) { /* AOI0 closed */
- if (cmfbi->count > 0) /* AOI1 open */
- ad->next_ad =
- cpu_to_le32(cmfbi->ad->paddr);
- else
- ad->next_ad = 0;
- wr_reg_wa(&hw->desc[1], ad->paddr);
- }
- break;
- case 3: /* plane 2 AOI 0 */
- cmfbi = machine_data->fsl_diu_info[4]->par;
- if (hw->desc[2] != ad->paddr) { /* AOI0 closed */
- if (cmfbi->count > 0) /* AOI1 open */
- ad->next_ad =
- cpu_to_le32(cmfbi->ad->paddr);
- else
- ad->next_ad = 0;
- wr_reg_wa(&hw->desc[2], ad->paddr);
- }
- break;
- case 2: /* plane 1 AOI 1 */
- pmfbi = machine_data->fsl_diu_info[1]->par;
- ad->next_ad = 0;
- if (hw->desc[1] == machine_data->dummy_ad->paddr)
- wr_reg_wa(&hw->desc[1], ad->paddr);
- else /* AOI0 open */
- pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
- break;
- case 4: /* plane 2 AOI 1 */
- pmfbi = machine_data->fsl_diu_info[3]->par;
- ad->next_ad = 0;
- if (hw->desc[2] == machine_data->dummy_ad->paddr)
- wr_reg_wa(&hw->desc[2], ad->paddr);
- else /* AOI0 was open */
- pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
- break;
- default:
- res = -EINVAL;
- break;
- }
- } else
- res = -EINVAL;
- return res;
-}
-
-static int fsl_diu_disable_panel(struct fb_info *info)
-{
- struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
- struct diu *hw = dr.diu_reg;
- struct diu_ad *ad = mfbi->ad;
- struct fsl_diu_data *machine_data = mfbi->parent;
- int res = 0;
+ struct diu __iomem *hw = machine_data->diu_reg;
switch (mfbi->index) {
- case 0: /* plane 0 */
+ case PLANE0:
+ if (hw->desc[0] != ad->paddr)
+ wr_reg_wa(&hw->desc[0], ad->paddr);
+ break;
+ case PLANE1_AOI0:
+ cmfbi = machine_data->fsl_diu_info[2]->par;
+ if (hw->desc[1] != ad->paddr) { /* AOI0 closed */
+ if (cmfbi->count > 0) /* AOI1 open */
+ ad->next_ad =
+ cpu_to_le32(cmfbi->ad->paddr);
+ else
+ ad->next_ad = 0;
+ wr_reg_wa(&hw->desc[1], ad->paddr);
+ }
+ break;
+ case PLANE2_AOI0:
+ cmfbi = machine_data->fsl_diu_info[4]->par;
+ if (hw->desc[2] != ad->paddr) { /* AOI0 closed */
+ if (cmfbi->count > 0) /* AOI1 open */
+ ad->next_ad =
+ cpu_to_le32(cmfbi->ad->paddr);
+ else
+ ad->next_ad = 0;
+ wr_reg_wa(&hw->desc[2], ad->paddr);
+ }
+ break;
+ case PLANE1_AOI1:
+ pmfbi = machine_data->fsl_diu_info[1]->par;
+ ad->next_ad = 0;
+ if (hw->desc[1] == machine_data->dummy_ad->paddr)
+ wr_reg_wa(&hw->desc[1], ad->paddr);
+ else /* AOI0 open */
+ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+ break;
+ case PLANE2_AOI1:
+ pmfbi = machine_data->fsl_diu_info[3]->par;
+ ad->next_ad = 0;
+ if (hw->desc[2] == machine_data->dummy_ad->paddr)
+ wr_reg_wa(&hw->desc[2], ad->paddr);
+ else /* AOI0 was open */
+ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+ break;
+ }
+}
+
+static void fsl_diu_disable_panel(struct fb_info *info)
+{
+ struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+ struct fsl_diu_data *machine_data = mfbi->parent;
+ struct diu __iomem *hw = machine_data->diu_reg;
+
+ switch (mfbi->index) {
+ case PLANE0:
if (hw->desc[0] != machine_data->dummy_ad->paddr)
wr_reg_wa(&hw->desc[0], machine_data->dummy_ad->paddr);
break;
- case 1: /* plane 1 AOI 0 */
+ case PLANE1_AOI0:
cmfbi = machine_data->fsl_diu_info[2]->par;
if (cmfbi->count > 0) /* AOI1 is open */
wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr);
@@ -414,7 +565,7 @@
wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
/* close AOI 0 */
break;
- case 3: /* plane 2 AOI 0 */
+ case PLANE2_AOI0:
cmfbi = machine_data->fsl_diu_info[4]->par;
if (cmfbi->count > 0) /* AOI1 is open */
wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr);
@@ -423,7 +574,7 @@
wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
/* close AOI 0 */
break;
- case 2: /* plane 1 AOI 1 */
+ case PLANE1_AOI1:
pmfbi = machine_data->fsl_diu_info[1]->par;
if (hw->desc[1] != ad->paddr) {
/* AOI1 is not the first in the chain */
@@ -434,7 +585,7 @@
wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
/* close AOI 1 */
break;
- case 4: /* plane 2 AOI 1 */
+ case PLANE2_AOI1:
pmfbi = machine_data->fsl_diu_info[3]->par;
if (hw->desc[2] != ad->paddr) {
/* AOI1 is not the first in the chain */
@@ -445,31 +596,26 @@
wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
/* close AOI 1 */
break;
- default:
- res = -EINVAL;
- break;
}
-
- return res;
}
static void enable_lcdc(struct fb_info *info)
{
- struct diu *hw = dr.diu_reg;
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
+ struct diu __iomem *hw = machine_data->diu_reg;
if (!machine_data->fb_enabled) {
- out_be32(&hw->diu_mode, dr.mode);
+ out_be32(&hw->diu_mode, MFB_MODE1);
machine_data->fb_enabled++;
}
}
static void disable_lcdc(struct fb_info *info)
{
- struct diu *hw = dr.diu_reg;
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
+ struct diu __iomem *hw = machine_data->diu_reg;
if (machine_data->fb_enabled) {
out_be32(&hw->diu_mode, 0);
@@ -482,7 +628,8 @@
{
struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
- int available_height, upper_aoi_bottom, index = mfbi->index;
+ int available_height, upper_aoi_bottom;
+ enum mfb_index index = mfbi->index;
int lower_aoi_is_open, upper_aoi_is_open;
__u32 base_plane_width, base_plane_height, upper_aoi_height;
@@ -494,14 +641,14 @@
if (mfbi->y_aoi_d < 0)
mfbi->y_aoi_d = 0;
switch (index) {
- case 0:
+ case PLANE0:
if (mfbi->x_aoi_d != 0)
mfbi->x_aoi_d = 0;
if (mfbi->y_aoi_d != 0)
mfbi->y_aoi_d = 0;
break;
- case 1: /* AOI 0 */
- case 3:
+ case PLANE1_AOI0:
+ case PLANE2_AOI0:
lower_aoi_mfbi = machine_data->fsl_diu_info[index+1]->par;
lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
if (var->xres > base_plane_width)
@@ -518,8 +665,8 @@
if ((mfbi->y_aoi_d + var->yres) > available_height)
mfbi->y_aoi_d = available_height - var->yres;
break;
- case 2: /* AOI 1 */
- case 4:
+ case PLANE1_AOI1:
+ case PLANE2_AOI1:
upper_aoi_mfbi = machine_data->fsl_diu_info[index-1]->par;
upper_aoi_height =
machine_data->fsl_diu_info[index-1]->var.yres;
@@ -555,9 +702,6 @@
static int fsl_diu_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- pr_debug("check_var xres: %d\n", var->xres);
- pr_debug("check_var yres: %d\n", var->yres);
-
if (var->xres_virtual < var->xres)
var->xres_virtual = var->xres;
if (var->yres_virtual < var->yres)
@@ -652,7 +796,7 @@
struct fb_var_screeninfo *var = &info->var;
struct mfb_info *mfbi = info->par;
- strncpy(fix->id, mfbi->id, strlen(mfbi->id));
+ strncpy(fix->id, mfbi->id, sizeof(fix->id));
fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
fix->type = FB_TYPE_PACKED_PIXELS;
fix->accel = FB_ACCEL_NONE;
@@ -666,45 +810,37 @@
struct fb_var_screeninfo *var = &info->var;
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
- struct diu *hw;
+ struct diu __iomem *hw;
int i, j;
char __iomem *cursor_base, *gamma_table_base;
u32 temp;
- hw = dr.diu_reg;
-
- if (mfbi->type == MFB_TYPE_OFF) {
- fsl_diu_disable_panel(info);
- return;
- }
+ hw = machine_data->diu_reg;
diu_ops.set_monitor_port(machine_data->monitor_port);
- gamma_table_base = pool.gamma.vaddr;
- cursor_base = pool.cursor.vaddr;
+ gamma_table_base = machine_data->gamma.vaddr;
+ cursor_base = machine_data->cursor.vaddr;
/* Prep for DIU init - gamma table, cursor table */
for (i = 0; i <= 2; i++)
- for (j = 0; j <= 255; j++)
- *gamma_table_base++ = j;
+ for (j = 0; j <= 255; j++)
+ *gamma_table_base++ = j;
- diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr);
+ diu_ops.set_gamma_table(machine_data->monitor_port,
+ machine_data->gamma.vaddr);
- pr_debug("update-lcdc: HW - %p\n Disabling DIU\n", hw);
disable_lcdc(info);
/* Program DIU registers */
- out_be32(&hw->gamma, pool.gamma.paddr);
- out_be32(&hw->cursor, pool.cursor.paddr);
+ out_be32(&hw->gamma, machine_data->gamma.paddr);
+ out_be32(&hw->cursor, machine_data->cursor.paddr);
out_be32(&hw->bgnd, 0x007F7F7F); /* BGND */
out_be32(&hw->bgnd_wb, 0); /* BGND_WB */
out_be32(&hw->disp_size, (var->yres << 16 | var->xres));
/* DISP SIZE */
- pr_debug("DIU xres: %d\n", var->xres);
- pr_debug("DIU yres: %d\n", var->yres);
-
out_be32(&hw->wb_size, 0); /* WB SIZE */
out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */
@@ -721,15 +857,6 @@
out_be32(&hw->vsyn_para, temp);
- pr_debug("DIU right_margin - %d\n", var->right_margin);
- pr_debug("DIU left_margin - %d\n", var->left_margin);
- pr_debug("DIU hsync_len - %d\n", var->hsync_len);
- pr_debug("DIU upper_margin - %d\n", var->upper_margin);
- pr_debug("DIU lower_margin - %d\n", var->lower_margin);
- pr_debug("DIU vsync_len - %d\n", var->vsync_len);
- pr_debug("DIU HSYNC - 0x%08x\n", hw->hsyn_para);
- pr_debug("DIU VSYNC - 0x%08x\n", hw->vsyn_para);
-
diu_ops.set_pixel_clock(var->pixclock);
out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */
@@ -746,14 +873,9 @@
phys_addr_t phys;
u32 smem_len = info->fix.line_length * info->var.yres_virtual;
- pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
- pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
- pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
- pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);
-
info->screen_base = fsl_diu_alloc(smem_len, &phys);
if (info->screen_base == NULL) {
- printk(KERN_ERR "Unable to allocate fb memory\n");
+ dev_err(info->dev, "unable to allocate fb memory\n");
return -ENOMEM;
}
mutex_lock(&info->mm_lock);
@@ -762,10 +884,6 @@
mutex_unlock(&info->mm_lock);
info->screen_size = info->fix.smem_len;
- pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
- info->fix.smem_start, info->fix.smem_len);
- pr_debug("screen base %p\n", info->screen_base);
-
return 0;
}
@@ -810,9 +928,9 @@
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
struct diu_ad *ad = mfbi->ad;
- struct diu *hw;
+ struct diu __iomem *hw;
- hw = dr.diu_reg;
+ hw = machine_data->diu_reg;
set_fix(info);
mfbi->cursor_reset = 1;
@@ -822,18 +940,16 @@
if (len != info->fix.smem_len) {
if (info->fix.smem_start)
unmap_video_memory(info);
- pr_debug("SET PAR: smem_len = %d\n", info->fix.smem_len);
/* Memory allocation for framebuffer */
if (map_video_memory(info)) {
- printk(KERN_ERR "Unable to allocate fb memory 1\n");
+ dev_err(info->dev, "unable to allocate fb memory 1\n");
return -ENOMEM;
}
}
- ad->pix_fmt =
- diu_ops.get_pixel_format(var->bits_per_pixel,
- machine_data->monitor_port);
+ ad->pix_fmt = diu_ops.get_pixel_format(machine_data->monitor_port,
+ var->bits_per_pixel);
ad->addr = cpu_to_le32(info->fix.smem_start);
ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
var->xres_virtual) | mfbi->g_alpha;
@@ -851,14 +967,14 @@
ad->ckmin_g = 255;
ad->ckmin_b = 255;
- if (mfbi->index == 0)
+ if (mfbi->index == PLANE0)
update_lcdc(info);
return 0;
}
static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
{
- return ((val<<width) + 0x7FFF - val)>>16;
+ return ((val << width) + 0x7FFF - val) >> 16;
}
/*
@@ -870,8 +986,9 @@
* pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
* color palette.
*/
-static int fsl_diu_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp, struct fb_info *info)
+static int fsl_diu_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info)
{
int ret = 1;
@@ -906,9 +1023,6 @@
ret = 0;
}
break;
- case FB_VISUAL_STATIC_PSEUDOCOLOR:
- case FB_VISUAL_PSEUDOCOLOR:
- break;
}
return ret;
@@ -944,37 +1058,6 @@
return 0;
}
-/*
- * Blank the screen if blank_mode != 0, else unblank. Return 0 if blanking
- * succeeded, != 0 if un-/blanking failed.
- * blank_mode == 2: suspend vsync
- * blank_mode == 3: suspend hsync
- * blank_mode == 4: powerdown
- */
-static int fsl_diu_blank(int blank_mode, struct fb_info *info)
-{
- struct mfb_info *mfbi = info->par;
-
- mfbi->blank = blank_mode;
-
- switch (blank_mode) {
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- /* FIXME: fixes to enable_panel and enable lcdc needed */
- case FB_BLANK_NORMAL:
- /* fsl_diu_disable_panel(info);*/
- break;
- case FB_BLANK_POWERDOWN:
- /* disable_lcdc(info); */
- break;
- case FB_BLANK_UNBLANK:
- /* fsl_diu_enable_panel(info);*/
- break;
- }
-
- return 0;
-}
-
static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
{
@@ -989,25 +1072,29 @@
if (!arg)
return -EINVAL;
switch (cmd) {
+ case MFB_SET_PIXFMT_OLD:
+ dev_warn(info->dev,
+ "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n",
+ MFB_SET_PIXFMT_OLD);
case MFB_SET_PIXFMT:
if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
return -EFAULT;
ad->pix_fmt = pix_fmt;
- pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt);
break;
+ case MFB_GET_PIXFMT_OLD:
+ dev_warn(info->dev,
+ "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n",
+ MFB_GET_PIXFMT_OLD);
case MFB_GET_PIXFMT:
pix_fmt = ad->pix_fmt;
if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
return -EFAULT;
- pr_debug("get pixel format 0x%08x\n", ad->pix_fmt);
break;
case MFB_SET_AOID:
if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
return -EFAULT;
mfbi->x_aoi_d = aoi_d.x_aoi_d;
mfbi->y_aoi_d = aoi_d.y_aoi_d;
- pr_debug("set AOI display offset of index %d to (%d,%d)\n",
- mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
fsl_diu_check_var(&info->var, info);
fsl_diu_set_aoi(info);
break;
@@ -1016,14 +1103,11 @@
aoi_d.y_aoi_d = mfbi->y_aoi_d;
if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
return -EFAULT;
- pr_debug("get AOI display offset of index %d (%d,%d)\n",
- mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
break;
case MFB_GET_ALPHA:
global_alpha = mfbi->g_alpha;
if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
return -EFAULT;
- pr_debug("get global alpha of index %d\n", mfbi->index);
break;
case MFB_SET_ALPHA:
/* set panel information */
@@ -1032,7 +1116,6 @@
ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
(global_alpha & 0xff);
mfbi->g_alpha = global_alpha;
- pr_debug("set global alpha for index %d\n", mfbi->index);
break;
case MFB_SET_CHROMA_KEY:
/* set panel winformation */
@@ -1060,27 +1143,9 @@
ad->ckmin_g = ck.green_min;
ad->ckmin_b = ck.blue_min;
}
- pr_debug("set chroma key\n");
break;
- case FBIOGET_GWINFO:
- if (mfbi->type == MFB_TYPE_OFF)
- return -ENODEV;
- /* get graphic window information */
- if (copy_to_user(buf, ad, sizeof(*ad)))
- return -EFAULT;
- break;
- case FBIOGET_HWCINFO:
- pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO);
- break;
- case FBIOPUT_MODEINFO:
- pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO);
- break;
- case FBIOGET_DISPINFO:
- pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO);
- break;
-
default:
- printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd);
+ dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd);
return -ENOIOCTLCMD;
}
@@ -1095,22 +1160,18 @@
int res = 0;
/* free boot splash memory on first /dev/fb0 open */
- if (!mfbi->index && diu_ops.release_bootmem)
+ if ((mfbi->index == PLANE0) && diu_ops.release_bootmem)
diu_ops.release_bootmem();
spin_lock(&diu_lock);
mfbi->count++;
if (mfbi->count == 1) {
- pr_debug("open plane index %d\n", mfbi->index);
fsl_diu_check_var(&info->var, info);
res = fsl_diu_set_par(info);
if (res < 0)
mfbi->count--;
- else {
- res = fsl_diu_enable_panel(info);
- if (res < 0)
- mfbi->count--;
- }
+ else
+ fsl_diu_enable_panel(info);
}
spin_unlock(&diu_lock);
@@ -1126,12 +1187,9 @@
spin_lock(&diu_lock);
mfbi->count--;
- if (mfbi->count == 0) {
- pr_debug("release plane index %d\n", mfbi->index);
- res = fsl_diu_disable_panel(info);
- if (res < 0)
- mfbi->count++;
- }
+ if (mfbi->count == 0)
+ fsl_diu_disable_panel(info);
+
spin_unlock(&diu_lock);
return res;
}
@@ -1141,7 +1199,6 @@
.fb_check_var = fsl_diu_check_var,
.fb_set_par = fsl_diu_set_par,
.fb_setcolreg = fsl_diu_setcolreg,
- .fb_blank = fsl_diu_blank,
.fb_pan_display = fsl_diu_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
@@ -1178,7 +1235,7 @@
if (init_fbinfo(info))
return -EINVAL;
- if (mfbi->index == 0) { /* plane 0 */
+ if (mfbi->index == PLANE0) {
if (mfbi->edid_data) {
/* Now build modedb from EDID */
fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs);
@@ -1192,43 +1249,23 @@
} else {
aoi_mode = init_aoi_mode;
}
- pr_debug("mode used = %s\n", aoi_mode);
- rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize,
- &fsl_diu_default_mode, default_bpp);
- switch (rc) {
- case 1:
- pr_debug("using mode specified in @mode\n");
- break;
- case 2:
- pr_debug("using mode specified in @mode "
- "with ignored refresh rate\n");
- break;
- case 3:
- pr_debug("using mode default mode\n");
- break;
- case 4:
- pr_debug("using mode from list\n");
- break;
- default:
- pr_debug("rc = %d\n", rc);
- pr_debug("failed to find mode\n");
+ rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL,
+ default_bpp);
+ if (!rc) {
/*
* For plane 0 we continue and look into
* driver's internal modedb.
*/
- if (mfbi->index == 0 && mfbi->edid_data)
+ if ((mfbi->index == PLANE0) && mfbi->edid_data)
has_default_mode = 0;
else
return -EINVAL;
- break;
}
if (!has_default_mode) {
rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
- ARRAY_SIZE(fsl_diu_mode_db),
- &fsl_diu_default_mode,
- default_bpp);
- if (rc > 0 && rc < 5)
+ ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp);
+ if (rc)
has_default_mode = 1;
}
@@ -1256,33 +1293,22 @@
fb_videomode_to_var(&info->var, modedb);
}
- pr_debug("xres_virtual %d\n", info->var.xres_virtual);
- pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
-
- pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
- pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
-
- if (mfbi->type == MFB_TYPE_OFF)
- mfbi->blank = FB_BLANK_NORMAL;
- else
- mfbi->blank = FB_BLANK_UNBLANK;
-
if (fsl_diu_check_var(&info->var, info)) {
- printk(KERN_ERR "fb_check_var failed");
+ dev_err(info->dev, "fsl_diu_check_var failed\n");
+ unmap_video_memory(info);
fb_dealloc_cmap(&info->cmap);
return -EINVAL;
}
if (register_framebuffer(info) < 0) {
- printk(KERN_ERR "register_framebuffer failed");
+ dev_err(info->dev, "register_framebuffer failed\n");
unmap_video_memory(info);
fb_dealloc_cmap(&info->cmap);
return -EINVAL;
}
mfbi->registered = 1;
- printk(KERN_INFO "fb%d: %s fb device registered successfully.\n",
- info->node, info->fix.id);
+ dev_info(info->dev, "%s registered successfully\n", mfbi->id);
return 0;
}
@@ -1294,7 +1320,7 @@
if (!mfbi->registered)
return;
- if (mfbi->index == 0)
+ if (mfbi->index == PLANE0)
kfree(mfbi->edid_data);
unregister_framebuffer(info);
@@ -1307,20 +1333,20 @@
static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
{
- struct diu *hw = dr.diu_reg;
+ struct diu __iomem *hw = dev_id;
unsigned int status = in_be32(&hw->int_status);
if (status) {
/* This is the workaround for underrun */
if (status & INT_UNDRUN) {
out_be32(&hw->diu_mode, 0);
- pr_debug("Err: DIU occurs underrun!\n");
udelay(1);
out_be32(&hw->diu_mode, 1);
}
#if defined(CONFIG_NOT_COHERENT_CACHE)
else if (status & INT_VSYNC) {
unsigned int i;
+
for (i = 0; i < coherence_data_size;
i += d_cache_line_size)
__asm__ __volatile__ (
@@ -1333,43 +1359,38 @@
return IRQ_NONE;
}
-static int request_irq_local(int irq)
+static int request_irq_local(struct fsl_diu_data *machine_data)
{
- unsigned long status, ints;
- struct diu *hw;
+ struct diu __iomem *hw = machine_data->diu_reg;
+ u32 ints;
int ret;
- hw = dr.diu_reg;
-
/* Read to clear the status */
- status = in_be32(&hw->int_status);
+ in_be32(&hw->int_status);
- ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
- if (ret)
- pr_info("Request diu IRQ failed.\n");
- else {
+ ret = request_irq(machine_data->irq, fsl_diu_isr, 0, "fsl-diu-fb", hw);
+ if (!ret) {
ints = INT_PARERR | INT_LS_BF_VS;
#if !defined(CONFIG_NOT_COHERENT_CACHE)
ints |= INT_VSYNC;
#endif
- if (dr.mode == MFB_MODE2 || dr.mode == MFB_MODE3)
- ints |= INT_VSYNC_WB;
/* Read to clear the status */
- status = in_be32(&hw->int_status);
+ in_be32(&hw->int_status);
out_be32(&hw->int_mask, ints);
}
+
return ret;
}
-static void free_irq_local(int irq)
+static void free_irq_local(struct fsl_diu_data *machine_data)
{
- struct diu *hw = dr.diu_reg;
+ struct diu __iomem *hw = machine_data->diu_reg;
/* Disable all LCDC interrupt */
out_be32(&hw->int_mask, 0x1f);
- free_irq(irq, NULL);
+ free_irq(machine_data->irq, NULL);
}
#ifdef CONFIG_PM
@@ -1406,49 +1427,42 @@
static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size,
u32 bytes_align)
{
- u32 offset, ssize;
- u32 mask;
- dma_addr_t paddr = 0;
+ u32 offset;
+ dma_addr_t mask;
- ssize = size + bytes_align;
- buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA |
- __GFP_ZERO);
+ buf->vaddr =
+ dma_alloc_coherent(dev, size + bytes_align, &buf->paddr,
+ GFP_DMA | __GFP_ZERO);
if (!buf->vaddr)
return -ENOMEM;
- buf->paddr = (__u32) paddr;
-
mask = bytes_align - 1;
- offset = (u32)buf->paddr & mask;
+ offset = buf->paddr & mask;
if (offset) {
buf->offset = bytes_align - offset;
- buf->paddr = (u32)buf->paddr + offset;
+ buf->paddr = buf->paddr + offset;
} else
buf->offset = 0;
+
return 0;
}
static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
u32 bytes_align)
{
- dma_free_coherent(dev, size + bytes_align,
- buf->vaddr, (buf->paddr - buf->offset));
- return;
+ dma_free_coherent(dev, size + bytes_align, buf->vaddr,
+ buf->paddr - buf->offset);
}
static ssize_t store_monitor(struct device *device,
struct device_attribute *attr, const char *buf, size_t count)
{
- int old_monitor_port;
- unsigned long val;
+ enum fsl_diu_monitor_port old_monitor_port;
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- if (strict_strtoul(buf, 10, &val))
- return 0;
-
old_monitor_port = machine_data->monitor_port;
- machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);
+ machine_data->monitor_port = fsl_diu_name_to_port(buf);
if (old_monitor_port != machine_data->monitor_port) {
/* All AOIs need adjust pixel format
@@ -1468,16 +1482,25 @@
{
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
+
+ switch (machine_data->monitor_port) {
+ case FSL_DIU_PORT_DVI:
+ return sprintf(buf, "DVI\n");
+ case FSL_DIU_PORT_LVDS:
+ return sprintf(buf, "Single-link LVDS\n");
+ case FSL_DIU_PORT_DLVDS:
+ return sprintf(buf, "Dual-link LVDS\n");
+ }
+
+ return 0;
}
-static int __devinit fsl_diu_probe(struct platform_device *ofdev)
+static int __devinit fsl_diu_probe(struct platform_device *pdev)
{
- struct device_node *np = ofdev->dev.of_node;
+ struct device_node *np = pdev->dev.of_node;
struct mfb_info *mfbi;
- phys_addr_t dummy_ad_addr;
+ phys_addr_t dummy_ad_addr = 0;
int ret, i, error = 0;
- struct resource res;
struct fsl_diu_data *machine_data;
int diu_mode;
@@ -1485,11 +1508,13 @@
if (!machine_data)
return -ENOMEM;
+ spin_lock_init(&machine_data->reg_lock);
+
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
machine_data->fsl_diu_info[i] =
- framebuffer_alloc(sizeof(struct mfb_info), &ofdev->dev);
+ framebuffer_alloc(sizeof(struct mfb_info), &pdev->dev);
if (!machine_data->fsl_diu_info[i]) {
- dev_err(&ofdev->dev, "cannot allocate memory\n");
+ dev_err(&pdev->dev, "cannot allocate memory\n");
ret = -ENOMEM;
goto error2;
}
@@ -1497,7 +1522,7 @@
memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
mfbi->parent = machine_data;
- if (mfbi->index == 0) {
+ if (mfbi->index == PLANE0) {
const u8 *prop;
int len;
@@ -1509,60 +1534,49 @@
}
}
- ret = of_address_to_resource(np, 0, &res);
- if (ret) {
- dev_err(&ofdev->dev, "could not obtain DIU address\n");
- goto error;
- }
- if (!res.start) {
- dev_err(&ofdev->dev, "invalid DIU address\n");
- goto error;
- }
- dev_dbg(&ofdev->dev, "%s, res.start: 0x%08x\n", __func__, res.start);
-
- dr.diu_reg = ioremap(res.start, sizeof(struct diu));
- if (!dr.diu_reg) {
- dev_err(&ofdev->dev, "Err: can't map DIU registers!\n");
+ machine_data->diu_reg = of_iomap(np, 0);
+ if (!machine_data->diu_reg) {
+ dev_err(&pdev->dev, "cannot map DIU registers\n");
ret = -EFAULT;
goto error2;
}
- diu_mode = in_be32(&dr.diu_reg->diu_mode);
- if (diu_mode != MFB_MODE1)
- out_be32(&dr.diu_reg->diu_mode, 0); /* disable DIU */
+ diu_mode = in_be32(&machine_data->diu_reg->diu_mode);
+ if (diu_mode == MFB_MODE0)
+ out_be32(&machine_data->diu_reg->diu_mode, 0); /* disable DIU */
/* Get the IRQ of the DIU */
machine_data->irq = irq_of_parse_and_map(np, 0);
if (!machine_data->irq) {
- dev_err(&ofdev->dev, "could not get DIU IRQ\n");
+ dev_err(&pdev->dev, "could not get DIU IRQ\n");
ret = -EINVAL;
goto error;
}
machine_data->monitor_port = monitor_port;
/* Area descriptor memory pool aligns to 64-bit boundary */
- if (allocate_buf(&ofdev->dev, &pool.ad,
+ if (allocate_buf(&pdev->dev, &machine_data->ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
return -ENOMEM;
/* Get memory for Gamma Table - 32-byte aligned memory */
- if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) {
+ if (allocate_buf(&pdev->dev, &machine_data->gamma, 768, 32)) {
ret = -ENOMEM;
goto error;
}
/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
- if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
- 32)) {
+ if (allocate_buf(&pdev->dev, &machine_data->cursor,
+ MAX_CURS * MAX_CURS * 2, 32)) {
ret = -ENOMEM;
goto error;
}
i = ARRAY_SIZE(machine_data->fsl_diu_info);
- machine_data->dummy_ad = (struct diu_ad *)
- ((u32)pool.ad.vaddr + pool.ad.offset) + i;
- machine_data->dummy_ad->paddr = pool.ad.paddr +
+ machine_data->dummy_ad = (struct diu_ad *)((u32)machine_data->ad.vaddr +
+ machine_data->ad.offset) + i;
+ machine_data->dummy_ad->paddr = machine_data->ad.paddr +
i * sizeof(struct diu_ad);
machine_data->dummy_aoi_virt = fsl_diu_alloc(64, &dummy_ad_addr);
if (!machine_data->dummy_aoi_virt) {
@@ -1581,30 +1595,29 @@
* Let DIU display splash screen if it was pre-initialized
* by the bootloader, set dummy area descriptor otherwise.
*/
- if (diu_mode != MFB_MODE1)
- out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
+ if (diu_mode == MFB_MODE0)
+ out_be32(&machine_data->diu_reg->desc[0],
+ machine_data->dummy_ad->paddr);
- out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
- out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);
+ out_be32(&machine_data->diu_reg->desc[1], machine_data->dummy_ad->paddr);
+ out_be32(&machine_data->diu_reg->desc[2], machine_data->dummy_ad->paddr);
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
machine_data->fsl_diu_info[i]->fix.smem_start = 0;
mfbi = machine_data->fsl_diu_info[i]->par;
- mfbi->ad = (struct diu_ad *)((u32)pool.ad.vaddr
- + pool.ad.offset) + i;
- mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad);
+ mfbi->ad = (struct diu_ad *)((u32)machine_data->ad.vaddr
+ + machine_data->ad.offset) + i;
+ mfbi->ad->paddr =
+ machine_data->ad.paddr + i * sizeof(struct diu_ad);
ret = install_fb(machine_data->fsl_diu_info[i]);
if (ret) {
- dev_err(&ofdev->dev,
- "Failed to register framebuffer %d\n",
- i);
+ dev_err(&pdev->dev, "could not register fb %d\n", i);
goto error;
}
}
- if (request_irq_local(machine_data->irq)) {
- dev_err(machine_data->fsl_diu_info[0]->dev,
- "could not request irq for diu.");
+ if (request_irq_local(machine_data)) {
+ dev_err(&pdev->dev, "could not claim irq\n");
goto error;
}
@@ -1616,29 +1629,28 @@
error = device_create_file(machine_data->fsl_diu_info[0]->dev,
&machine_data->dev_attr);
if (error) {
- dev_err(machine_data->fsl_diu_info[0]->dev,
- "could not create sysfs %s file\n",
+ dev_err(&pdev->dev, "could not create sysfs file %s\n",
machine_data->dev_attr.attr.name);
}
- dev_set_drvdata(&ofdev->dev, machine_data);
+ dev_set_drvdata(&pdev->dev, machine_data);
return 0;
error:
- for (i = ARRAY_SIZE(machine_data->fsl_diu_info);
- i > 0; i--)
- uninstall_fb(machine_data->fsl_diu_info[i - 1]);
- if (pool.ad.vaddr)
- free_buf(&ofdev->dev, &pool.ad,
+ for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
+ uninstall_fb(machine_data->fsl_diu_info[i]);
+
+ if (machine_data->ad.vaddr)
+ free_buf(&pdev->dev, &machine_data->ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
- if (pool.gamma.vaddr)
- free_buf(&ofdev->dev, &pool.gamma, 768, 32);
- if (pool.cursor.vaddr)
- free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
- 32);
+ if (machine_data->gamma.vaddr)
+ free_buf(&pdev->dev, &machine_data->gamma, 768, 32);
+ if (machine_data->cursor.vaddr)
+ free_buf(&pdev->dev, &machine_data->cursor,
+ MAX_CURS * MAX_CURS * 2, 32);
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
- iounmap(dr.diu_reg);
+ iounmap(machine_data->diu_reg);
error2:
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
@@ -1649,28 +1661,27 @@
return ret;
}
-
-static int fsl_diu_remove(struct platform_device *ofdev)
+static int fsl_diu_remove(struct platform_device *pdev)
{
struct fsl_diu_data *machine_data;
int i;
- machine_data = dev_get_drvdata(&ofdev->dev);
+ machine_data = dev_get_drvdata(&pdev->dev);
disable_lcdc(machine_data->fsl_diu_info[0]);
- free_irq_local(machine_data->irq);
- for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
- uninstall_fb(machine_data->fsl_diu_info[i - 1]);
- if (pool.ad.vaddr)
- free_buf(&ofdev->dev, &pool.ad,
+ free_irq_local(machine_data);
+ for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
+ uninstall_fb(machine_data->fsl_diu_info[i]);
+ if (machine_data->ad.vaddr)
+ free_buf(&pdev->dev, &machine_data->ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
- if (pool.gamma.vaddr)
- free_buf(&ofdev->dev, &pool.gamma, 768, 32);
- if (pool.cursor.vaddr)
- free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
- 32);
+ if (machine_data->gamma.vaddr)
+ free_buf(&pdev->dev, &machine_data->gamma, 768, 32);
+ if (machine_data->cursor.vaddr)
+ free_buf(&pdev->dev, &machine_data->cursor,
+ MAX_CURS * MAX_CURS * 2, 32);
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
- iounmap(dr.diu_reg);
+ iounmap(machine_data->diu_reg);
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
if (machine_data->fsl_diu_info[i])
framebuffer_release(machine_data->fsl_diu_info[i]);
@@ -1692,8 +1703,7 @@
if (!*opt)
continue;
if (!strncmp(opt, "monitor=", 8)) {
- if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
- monitor_port = val;
+ monitor_port = fsl_diu_name_to_port(opt + 8);
} else if (!strncmp(opt, "bpp=", 4)) {
if (!strict_strtoul(opt + 4, 10, &val))
default_bpp = val;
@@ -1720,7 +1730,7 @@
static struct platform_driver fsl_diu_driver = {
.driver = {
- .name = "fsl_diu",
+ .name = "fsl-diu-fb",
.owner = THIS_MODULE,
.of_match_table = fsl_diu_match,
},
@@ -1746,48 +1756,54 @@
if (fb_get_options("fslfb", &option))
return -ENODEV;
fsl_diu_setup(option);
+#else
+ monitor_port = fsl_diu_name_to_port(monitor_string);
#endif
- printk(KERN_INFO "Freescale DIU driver\n");
+ pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
#ifdef CONFIG_NOT_COHERENT_CACHE
np = of_find_node_by_type(NULL, "cpu");
if (!np) {
- printk(KERN_ERR "Err: can't find device node 'cpu'\n");
+ pr_err("fsl-diu-fb: can't find 'cpu' device node\n");
return -ENODEV;
}
prop = of_get_property(np, "d-cache-size", NULL);
if (prop == NULL) {
+ pr_err("fsl-diu-fb: missing 'd-cache-size' property' "
+ "in 'cpu' node\n");
of_node_put(np);
return -ENODEV;
}
- /* Freescale PLRU requires 13/8 times the cache size to do a proper
- displacement flush
+ /*
+ * Freescale PLRU requires 13/8 times the cache size to do a proper
+ * displacement flush
*/
- coherence_data_size = *prop * 13;
+ coherence_data_size = be32_to_cpup(prop) * 13;
coherence_data_size /= 8;
prop = of_get_property(np, "d-cache-line-size", NULL);
if (prop == NULL) {
+ pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' "
+ "in 'cpu' node\n");
of_node_put(np);
return -ENODEV;
}
- d_cache_line_size = *prop;
+ d_cache_line_size = be32_to_cpup(prop);
of_node_put(np);
coherence_data = vmalloc(coherence_data_size);
if (!coherence_data)
return -ENOMEM;
#endif
+
ret = platform_driver_register(&fsl_diu_driver);
if (ret) {
- printk(KERN_ERR
- "fsl-diu: failed to register platform driver\n");
+ pr_err("fsl-diu-fb: failed to register platform driver\n");
#if defined(CONFIG_NOT_COHERENT_CACHE)
vfree(coherence_data);
#endif
- iounmap(dr.diu_reg);
}
return ret;
}
@@ -1811,8 +1827,8 @@
MODULE_PARM_DESC(mode,
"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
module_param_named(bpp, default_bpp, ulong, 0);
-MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
-module_param_named(monitor, monitor_port, int, 0);
-MODULE_PARM_DESC(monitor,
- "Specify the monitor port (0, 1 or 2) if supported by the platform");
+MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'");
+module_param_named(monitor, monitor_string, charp, 0);
+MODULE_PARM_DESC(monitor, "Specify the monitor port "
+ "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform");
diff --git a/drivers/video/g364fb.c b/drivers/video/g364fb.c
index d662317..223896c 100644
--- a/drivers/video/g364fb.c
+++ b/drivers/video/g364fb.c
@@ -149,10 +149,11 @@
static int g364fb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- if (var->xoffset || var->yoffset + var->yres > var->yres_virtual)
+ if (var->xoffset ||
+ var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
- *(unsigned int *) TOP_REG = var->yoffset * var->xres;
+ *(unsigned int *) TOP_REG = var->yoffset * info->var.xres;
return 0;
}
diff --git a/drivers/video/grvga.c b/drivers/video/grvga.c
new file mode 100644
index 0000000..f37e025
--- /dev/null
+++ b/drivers/video/grvga.c
@@ -0,0 +1,579 @@
+/*
+ * Driver for Aeroflex Gaisler SVGACTRL framebuffer device.
+ *
+ * 2011 (c) Aeroflex Gaisler AB
+ *
+ * Full documentation of the core can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Contributors: Kristoffer Glembo <kristoffer@gaisler.com>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+
+struct grvga_regs {
+ u32 status; /* 0x00 */
+ u32 video_length; /* 0x04 */
+ u32 front_porch; /* 0x08 */
+ u32 sync_length; /* 0x0C */
+ u32 line_length; /* 0x10 */
+ u32 fb_pos; /* 0x14 */
+ u32 clk_vector[4]; /* 0x18 */
+ u32 clut; /* 0x20 */
+};
+
+struct grvga_par {
+ struct grvga_regs *regs;
+ u32 color_palette[16]; /* 16 entry pseudo palette used by fbcon in true color mode */
+ int clk_sel;
+ int fb_alloced; /* = 1 if framebuffer is allocated in main memory */
+};
+
+
+static const struct fb_videomode grvga_modedb[] = {
+ {
+ /* 640x480 @ 60 Hz */
+ NULL, 60, 640, 480, 40000, 48, 16, 39, 11, 96, 2,
+ 0, FB_VMODE_NONINTERLACED
+ }, {
+ /* 800x600 @ 60 Hz */
+ NULL, 60, 800, 600, 25000, 88, 40, 23, 1, 128, 4,
+ 0, FB_VMODE_NONINTERLACED
+ }, {
+ /* 800x600 @ 72 Hz */
+ NULL, 72, 800, 600, 20000, 64, 56, 23, 37, 120, 6,
+ 0, FB_VMODE_NONINTERLACED
+ }, {
+ /* 1024x768 @ 60 Hz */
+ NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+ 0, FB_VMODE_NONINTERLACED
+ }
+ };
+
+static struct fb_fix_screeninfo grvga_fix __initdata = {
+ .id = "AG SVGACTRL",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_PSEUDOCOLOR,
+ .xpanstep = 0,
+ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+static int grvga_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct grvga_par *par = info->par;
+ int i;
+
+ if (!var->xres)
+ var->xres = 1;
+ if (!var->yres)
+ var->yres = 1;
+ if (var->bits_per_pixel <= 8)
+ var->bits_per_pixel = 8;
+ else if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 24)
+ var->bits_per_pixel = 24;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
+ else
+ return -EINVAL;
+
+ var->xres_virtual = var->xres;
+ var->yres_virtual = 2*var->yres;
+
+ if (info->fix.smem_len) {
+ if ((var->yres_virtual*var->xres_virtual*var->bits_per_pixel/8) > info->fix.smem_len)
+ return -ENOMEM;
+ }
+
+ /* Which clocks that are available can be read out in these registers */
+ for (i = 0; i <= 3 ; i++) {
+ if (var->pixclock == par->regs->clk_vector[i])
+ break;
+ }
+ if (i <= 3)
+ par->clk_sel = i;
+ else
+ return -EINVAL;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ var->red = (struct fb_bitfield) {0, 8, 0}; /* offset, length, msb-right */
+ var->green = (struct fb_bitfield) {0, 8, 0};
+ var->blue = (struct fb_bitfield) {0, 8, 0};
+ var->transp = (struct fb_bitfield) {0, 0, 0};
+ break;
+ case 16:
+ var->red = (struct fb_bitfield) {11, 5, 0};
+ var->green = (struct fb_bitfield) {5, 6, 0};
+ var->blue = (struct fb_bitfield) {0, 5, 0};
+ var->transp = (struct fb_bitfield) {0, 0, 0};
+ break;
+ case 24:
+ case 32:
+ var->red = (struct fb_bitfield) {16, 8, 0};
+ var->green = (struct fb_bitfield) {8, 8, 0};
+ var->blue = (struct fb_bitfield) {0, 8, 0};
+ var->transp = (struct fb_bitfield) {24, 8, 0};
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int grvga_set_par(struct fb_info *info)
+{
+
+ u32 func = 0;
+ struct grvga_par *par = info->par;
+
+ __raw_writel(((info->var.yres - 1) << 16) | (info->var.xres - 1),
+ &par->regs->video_length);
+
+ __raw_writel((info->var.lower_margin << 16) | (info->var.right_margin),
+ &par->regs->front_porch);
+
+ __raw_writel((info->var.vsync_len << 16) | (info->var.hsync_len),
+ &par->regs->sync_length);
+
+ __raw_writel(((info->var.yres + info->var.lower_margin + info->var.upper_margin + info->var.vsync_len - 1) << 16) |
+ (info->var.xres + info->var.right_margin + info->var.left_margin + info->var.hsync_len - 1),
+ &par->regs->line_length);
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ func = 1;
+ break;
+ case 16:
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ func = 2;
+ break;
+ case 24:
+ case 32:
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ func = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ __raw_writel((par->clk_sel << 6) | (func << 4) | 1,
+ &par->regs->status);
+
+ info->fix.line_length = (info->var.xres_virtual*info->var.bits_per_pixel)/8;
+ return 0;
+}
+
+static int grvga_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info)
+{
+ struct grvga_par *par;
+ par = info->par;
+
+ if (regno >= 256) /* Size of CLUT */
+ return -EINVAL;
+
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+
+
+#define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16)
+
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+
+#undef CNVT_TOHW
+
+ /* In PSEUDOCOLOR we use the hardware CLUT */
+ if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+ __raw_writel((regno << 24) | (red << 16) | (green << 8) | blue,
+ &par->regs->clut);
+
+ /* Truecolor uses the pseudo palette */
+ else if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 v;
+ if (regno >= 16)
+ return -EINVAL;
+
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ ((u32 *) (info->pseudo_palette))[regno] = v;
+ }
+ return 0;
+}
+
+static int grvga_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct grvga_par *par = info->par;
+ struct fb_fix_screeninfo *fix = &info->fix;
+ u32 base_addr;
+
+ if (var->xoffset != 0)
+ return -EINVAL;
+
+ base_addr = fix->smem_start + (var->yoffset * fix->line_length);
+ base_addr &= ~3UL;
+
+ /* Set framebuffer base address */
+ __raw_writel(base_addr,
+ &par->regs->fb_pos);
+
+ return 0;
+}
+
+static struct fb_ops grvga_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = grvga_check_var,
+ .fb_set_par = grvga_set_par,
+ .fb_setcolreg = grvga_setcolreg,
+ .fb_pan_display = grvga_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit
+};
+
+static int __init grvga_parse_custom(char *options,
+ struct fb_var_screeninfo *screendata)
+{
+ char *this_opt;
+ int count = 0;
+ if (!options || !*options)
+ return -1;
+
+ while ((this_opt = strsep(&options, " ")) != NULL) {
+ if (!*this_opt)
+ continue;
+
+ switch (count) {
+ case 0:
+ screendata->pixclock = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 1:
+ screendata->xres = screendata->xres_virtual = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 2:
+ screendata->right_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 3:
+ screendata->hsync_len = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 4:
+ screendata->left_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 5:
+ screendata->yres = screendata->yres_virtual = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 6:
+ screendata->lower_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 7:
+ screendata->vsync_len = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 8:
+ screendata->upper_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 9:
+ screendata->bits_per_pixel = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ default:
+ return -1;
+ }
+ }
+ screendata->activate = FB_ACTIVATE_NOW;
+ screendata->vmode = FB_VMODE_NONINTERLACED;
+ return 0;
+}
+
+static int __devinit grvga_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ int retval = -ENOMEM;
+ unsigned long virtual_start;
+ unsigned long grvga_fix_addr = 0;
+ unsigned long physical_start = 0;
+ unsigned long grvga_mem_size = 0;
+ struct grvga_par *par = NULL;
+ char *options = NULL, *mode_opt = NULL;
+
+ info = framebuffer_alloc(sizeof(struct grvga_par), &dev->dev);
+ if (!info) {
+ dev_err(&dev->dev, "framebuffer_alloc failed\n");
+ return -ENOMEM;
+ }
+
+ /* Expecting: "grvga: modestring, [addr:<framebuffer physical address>], [size:<framebuffer size>]
+ *
+ * If modestring is custom:<custom mode string> we parse the string which then contains all videoparameters
+ * If address is left out, we allocate memory,
+ * if size is left out we only allocate enough to support the given mode.
+ */
+ if (fb_get_options("grvga", &options)) {
+ retval = -ENODEV;
+ goto err;
+ }
+
+ if (!options || !*options)
+ options = "640x480-8@60";
+
+ while (1) {
+ char *this_opt = strsep(&options, ",");
+
+ if (!this_opt)
+ break;
+
+ if (!strncmp(this_opt, "custom", 6)) {
+ if (grvga_parse_custom(this_opt, &info->var) < 0) {
+ dev_err(&dev->dev, "Failed to parse custom mode (%s).\n", this_opt);
+ retval = -EINVAL;
+ goto err1;
+ }
+ } else if (!strncmp(this_opt, "addr", 4))
+ grvga_fix_addr = simple_strtoul(this_opt + 5, NULL, 16);
+ else if (!strncmp(this_opt, "size", 4))
+ grvga_mem_size = simple_strtoul(this_opt + 5, NULL, 0);
+ else
+ mode_opt = this_opt;
+ }
+
+ par = info->par;
+ info->fbops = &grvga_ops;
+ info->fix = grvga_fix;
+ info->pseudo_palette = par->color_palette;
+ info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
+ info->fix.smem_len = grvga_mem_size;
+
+ if (!request_mem_region(dev->resource[0].start, resource_size(&dev->resource[0]), "grlib-svgactrl regs")) {
+ dev_err(&dev->dev, "registers already mapped\n");
+ retval = -EBUSY;
+ goto err;
+ }
+
+ par->regs = of_ioremap(&dev->resource[0], 0,
+ resource_size(&dev->resource[0]),
+ "grlib-svgactrl regs");
+
+ if (!par->regs) {
+ dev_err(&dev->dev, "failed to map registers\n");
+ retval = -ENOMEM;
+ goto err1;
+ }
+
+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (retval < 0) {
+ dev_err(&dev->dev, "failed to allocate mem with fb_alloc_cmap\n");
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ if (mode_opt) {
+ retval = fb_find_mode(&info->var, info, mode_opt,
+ grvga_modedb, sizeof(grvga_modedb), &grvga_modedb[0], 8);
+ if (!retval || retval == 4) {
+ retval = -EINVAL;
+ goto err3;
+ }
+ }
+
+ if (!grvga_mem_size)
+ grvga_mem_size = info->var.xres_virtual * info->var.yres_virtual * info->var.bits_per_pixel/8;
+
+ if (grvga_fix_addr) {
+ /* Got framebuffer base address from argument list */
+
+ physical_start = grvga_fix_addr;
+
+ if (!request_mem_region(physical_start, grvga_mem_size, dev->name)) {
+ dev_err(&dev->dev, "failed to request memory region\n");
+ retval = -ENOMEM;
+ goto err3;
+ }
+
+ virtual_start = (unsigned long) ioremap(physical_start, grvga_mem_size);
+
+ if (!virtual_start) {
+ dev_err(&dev->dev, "error mapping framebuffer memory\n");
+ retval = -ENOMEM;
+ goto err4;
+ }
+ } else { /* Allocate frambuffer memory */
+
+ unsigned long page;
+
+ virtual_start = (unsigned long) __get_free_pages(GFP_DMA,
+ get_order(grvga_mem_size));
+ if (!virtual_start) {
+ dev_err(&dev->dev,
+ "unable to allocate framebuffer memory (%lu bytes)\n",
+ grvga_mem_size);
+ retval = -ENOMEM;
+ goto err3;
+ }
+
+ physical_start = dma_map_single(&dev->dev, (void *)virtual_start, grvga_mem_size, DMA_TO_DEVICE);
+
+ /* Set page reserved so that mmap will work. This is necessary
+ * since we'll be remapping normal memory.
+ */
+ for (page = virtual_start;
+ page < PAGE_ALIGN(virtual_start + grvga_mem_size);
+ page += PAGE_SIZE) {
+ SetPageReserved(virt_to_page(page));
+ }
+
+ par->fb_alloced = 1;
+ }
+
+ memset((unsigned long *) virtual_start, 0, grvga_mem_size);
+
+ info->screen_base = (char __iomem *) virtual_start;
+ info->fix.smem_start = physical_start;
+ info->fix.smem_len = grvga_mem_size;
+
+ dev_set_drvdata(&dev->dev, info);
+
+ dev_info(&dev->dev,
+ "Aeroflex Gaisler framebuffer device (fb%d), %dx%d-%d, using %luK of video memory @ %p\n",
+ info->node, info->var.xres, info->var.yres, info->var.bits_per_pixel,
+ grvga_mem_size >> 10, info->screen_base);
+
+ retval = register_framebuffer(info);
+ if (retval < 0) {
+ dev_err(&dev->dev, "failed to register framebuffer\n");
+ goto err4;
+ }
+
+ __raw_writel(physical_start, &par->regs->fb_pos);
+ __raw_writel(__raw_readl(&par->regs->status) | 1, /* Enable framebuffer */
+ &par->regs->status);
+
+ return 0;
+
+err4:
+ dev_set_drvdata(&dev->dev, NULL);
+ if (grvga_fix_addr) {
+ release_mem_region(physical_start, grvga_mem_size);
+ iounmap((void *)virtual_start);
+ } else
+ kfree((void *)virtual_start);
+err3:
+ fb_dealloc_cmap(&info->cmap);
+err2:
+ of_iounmap(&dev->resource[0], par->regs,
+ resource_size(&dev->resource[0]));
+err1:
+ release_mem_region(dev->resource[0].start, resource_size(&dev->resource[0]));
+err:
+ framebuffer_release(info);
+
+ return retval;
+}
+
+static int __devexit grvga_remove(struct platform_device *device)
+{
+ struct fb_info *info = dev_get_drvdata(&device->dev);
+ struct grvga_par *par = info->par;
+
+ if (info) {
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+
+ of_iounmap(&device->resource[0], par->regs,
+ resource_size(&device->resource[0]));
+ release_mem_region(device->resource[0].start, resource_size(&device->resource[0]));
+
+ if (!par->fb_alloced) {
+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
+ iounmap(info->screen_base);
+ } else
+ kfree((void *)info->screen_base);
+
+ framebuffer_release(info);
+ dev_set_drvdata(&device->dev, NULL);
+ }
+
+ return 0;
+}
+
+static struct of_device_id svgactrl_of_match[] = {
+ {
+ .name = "GAISLER_SVGACTRL",
+ },
+ {
+ .name = "01_063",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, svgactrl_of_match);
+
+static struct platform_driver grvga_driver = {
+ .driver = {
+ .name = "grlib-svgactrl",
+ .owner = THIS_MODULE,
+ .of_match_table = svgactrl_of_match,
+ },
+ .probe = grvga_probe,
+ .remove = __devexit_p(grvga_remove),
+};
+
+
+static int __init grvga_init(void)
+{
+ return platform_driver_register(&grvga_driver);
+}
+
+static void __exit grvga_exit(void)
+{
+ platform_driver_unregister(&grvga_driver);
+}
+
+module_init(grvga_init);
+module_exit(grvga_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Aeroflex Gaisler");
+MODULE_DESCRIPTION("Aeroflex Gaisler framebuffer device driver");
diff --git a/drivers/video/gxt4500.c b/drivers/video/gxt4500.c
index 896e53d..0fad23f 100644
--- a/drivers/video/gxt4500.c
+++ b/drivers/video/gxt4500.c
@@ -543,8 +543,8 @@
if (var->xoffset & 7)
return -EINVAL;
- if (var->xoffset + var->xres > var->xres_virtual ||
- var->yoffset + var->yres > var->yres_virtual)
+ if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+ var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
writereg(par, REFRESH_START, (var->xoffset << 16) | var->yoffset);
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index 4052718..4394389 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -422,8 +422,8 @@
var->xoffset)
return -EINVAL;
} else {
- if (var->xoffset + var->xres > info->var.xres_virtual
- || var->yoffset + var->yres > info->var.yres_virtual
+ if (var->xoffset + info->var.xres > info->var.xres_virtual
+ || var->yoffset + info->var.yres > info->var.yres_virtual
|| var->yoffset % 8)
return -EINVAL;
}
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
index efb2c10..8149356 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -749,7 +749,7 @@
{
struct imstt_par *par = info->par;
__u32 off = var->yoffset * (info->fix.line_length >> 3)
- + ((var->xoffset * (var->bits_per_pixel >> 3)) >> 3);
+ + ((var->xoffset * (info->var.bits_per_pixel >> 3)) >> 3);
write_reg_le32(par->dc_regs, SSR, off);
}
diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c
index 38065cf..fbad61d 100644
--- a/drivers/video/intelfb/intelfbhw.c
+++ b/drivers/video/intelfb/intelfbhw.c
@@ -390,12 +390,12 @@
xoffset = ROUND_DOWN_TO(var->xoffset, 8);
yoffset = var->yoffset;
- if ((xoffset + var->xres > var->xres_virtual) ||
- (yoffset + var->yres > var->yres_virtual))
+ if ((xoffset + info->var.xres > info->var.xres_virtual) ||
+ (yoffset + info->var.yres > info->var.yres_virtual))
return -EINVAL;
offset = (yoffset * dinfo->pitch) +
- (xoffset * var->bits_per_pixel) / 8;
+ (xoffset * info->var.bits_per_pixel) / 8;
offset += dinfo->fb.offset << 12;
diff --git a/drivers/video/mb862xx/mb862xx-i2c.c b/drivers/video/mb862xx/mb862xx-i2c.c
index b953099..934081d 100644
--- a/drivers/video/mb862xx/mb862xx-i2c.c
+++ b/drivers/video/mb862xx/mb862xx-i2c.c
@@ -23,7 +23,7 @@
u32 reg;
do {
- udelay(1);
+ udelay(10);
reg = inreg(i2c, GC_I2C_BCR);
if (reg & (I2C_INT | I2C_BER))
break;
diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/mb862xx/mb862xxfbdrv.c
index ee1de3e..c16ff1d 100644
--- a/drivers/video/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/mb862xx/mb862xxfbdrv.c
@@ -278,7 +278,7 @@
reg = pack(var->yoffset, var->xoffset);
outreg(disp, GC_L0WY_L0WX, reg);
- reg = pack(var->yres_virtual, var->xres_virtual);
+ reg = pack(info->var.yres_virtual, info->var.xres_virtual);
outreg(disp, GC_L0WH_L0WW, reg);
return 0;
}
@@ -737,7 +737,7 @@
if (mb862xx_gdc_init(par))
goto io_unmap;
- if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED,
+ if (request_irq(par->irq, mb862xx_intr, 0,
DRV_NAME, (void *)par)) {
dev_err(dev, "Cannot request irq\n");
goto io_unmap;
@@ -1073,7 +1073,7 @@
if (mb862xx_pci_gdc_init(par))
goto io_unmap;
- if (request_irq(par->irq, mb862xx_intr, IRQF_DISABLED | IRQF_SHARED,
+ if (request_irq(par->irq, mb862xx_intr, IRQF_SHARED,
DRV_NAME, (void *)par)) {
dev_err(dev, "Cannot request irq\n");
goto io_unmap;
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index afea9ab..6ce3416 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -34,7 +34,7 @@
#include "regs.h"
#include "reg_bits.h"
-static unsigned long virt_base_2700;
+static void __iomem *virt_base_2700;
#define write_reg(val, reg) do { writel((val), (reg)); } while(0)
@@ -850,7 +850,7 @@
{
/* make frame buffer memory enter self-refresh mode */
write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR);
- while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
+ while (readl(LMPWRSTAT) != LMPWRSTAT_MC_PWR_SRM)
; /* empty statement */
/* reset the device, since it's initial state is 'mostly sleeping' */
@@ -946,7 +946,7 @@
ret = -EINVAL;
goto err3;
}
- virt_base_2700 = (unsigned long)mfbi->reg_virt_addr;
+ virt_base_2700 = mfbi->reg_virt_addr;
mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr,
res_size(mfbi->fb_req));
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index cb175fe..a9a907c 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -491,55 +491,56 @@
static int fb_try_mode(struct fb_var_screeninfo *var, struct fb_info *info,
const struct fb_videomode *mode, unsigned int bpp)
{
- int err = 0;
+ int err = 0;
- DPRINTK("Trying mode %s %dx%d-%d@%d\n", mode->name ? mode->name : "noname",
- mode->xres, mode->yres, bpp, mode->refresh);
- var->xres = mode->xres;
- var->yres = mode->yres;
- var->xres_virtual = mode->xres;
- var->yres_virtual = mode->yres;
- var->xoffset = 0;
- var->yoffset = 0;
- var->bits_per_pixel = bpp;
- var->activate |= FB_ACTIVATE_TEST;
- var->pixclock = mode->pixclock;
- var->left_margin = mode->left_margin;
- var->right_margin = mode->right_margin;
- var->upper_margin = mode->upper_margin;
- var->lower_margin = mode->lower_margin;
- var->hsync_len = mode->hsync_len;
- var->vsync_len = mode->vsync_len;
- var->sync = mode->sync;
- var->vmode = mode->vmode;
- if (info->fbops->fb_check_var)
- err = info->fbops->fb_check_var(var, info);
- var->activate &= ~FB_ACTIVATE_TEST;
- return err;
+ DPRINTK("Trying mode %s %dx%d-%d@%d\n",
+ mode->name ? mode->name : "noname",
+ mode->xres, mode->yres, bpp, mode->refresh);
+ var->xres = mode->xres;
+ var->yres = mode->yres;
+ var->xres_virtual = mode->xres;
+ var->yres_virtual = mode->yres;
+ var->xoffset = 0;
+ var->yoffset = 0;
+ var->bits_per_pixel = bpp;
+ var->activate |= FB_ACTIVATE_TEST;
+ var->pixclock = mode->pixclock;
+ var->left_margin = mode->left_margin;
+ var->right_margin = mode->right_margin;
+ var->upper_margin = mode->upper_margin;
+ var->lower_margin = mode->lower_margin;
+ var->hsync_len = mode->hsync_len;
+ var->vsync_len = mode->vsync_len;
+ var->sync = mode->sync;
+ var->vmode = mode->vmode;
+ if (info->fbops->fb_check_var)
+ err = info->fbops->fb_check_var(var, info);
+ var->activate &= ~FB_ACTIVATE_TEST;
+ return err;
}
/**
- * fb_find_mode - finds a valid video mode
- * @var: frame buffer user defined part of display
- * @info: frame buffer info structure
- * @mode_option: string video mode to find
- * @db: video mode database
- * @dbsize: size of @db
- * @default_mode: default video mode to fall back to
- * @default_bpp: default color depth in bits per pixel
+ * fb_find_mode - finds a valid video mode
+ * @var: frame buffer user defined part of display
+ * @info: frame buffer info structure
+ * @mode_option: string video mode to find
+ * @db: video mode database
+ * @dbsize: size of @db
+ * @default_mode: default video mode to fall back to
+ * @default_bpp: default color depth in bits per pixel
*
- * Finds a suitable video mode, starting with the specified mode
- * in @mode_option with fallback to @default_mode. If
- * @default_mode fails, all modes in the video mode database will
- * be tried.
+ * Finds a suitable video mode, starting with the specified mode
+ * in @mode_option with fallback to @default_mode. If
+ * @default_mode fails, all modes in the video mode database will
+ * be tried.
*
- * Valid mode specifiers for @mode_option:
+ * Valid mode specifiers for @mode_option:
*
- * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m] or
- * <name>[-<bpp>][@<refresh>]
+ * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m] or
+ * <name>[-<bpp>][@<refresh>]
*
- * with <xres>, <yres>, <bpp> and <refresh> decimal numbers and
- * <name> a string.
+ * with <xres>, <yres>, <bpp> and <refresh> decimal numbers and
+ * <name> a string.
*
* If 'M' is present after yres (and before refresh/bpp if present),
* the function will compute the timings using VESA(tm) Coordinated
@@ -551,12 +552,12 @@
*
* 1024x768MR-8@60m - Reduced blank with margins at 60Hz.
*
- * NOTE: The passed struct @var is _not_ cleared! This allows you
- * to supply values for e.g. the grayscale and accel_flags fields.
+ * NOTE: The passed struct @var is _not_ cleared! This allows you
+ * to supply values for e.g. the grayscale and accel_flags fields.
*
- * Returns zero for failure, 1 if using specified @mode_option,
- * 2 if using specified @mode_option with an ignored refresh rate,
- * 3 if default mode is used, 4 if fall back to any valid mode.
+ * Returns zero for failure, 1 if using specified @mode_option,
+ * 2 if using specified @mode_option with an ignored refresh rate,
+ * 3 if default mode is used, 4 if fall back to any valid mode.
*
*/
@@ -566,198 +567,203 @@
const struct fb_videomode *default_mode,
unsigned int default_bpp)
{
- int i;
+ int i;
- /* Set up defaults */
- if (!db) {
- db = modedb;
- dbsize = ARRAY_SIZE(modedb);
- }
-
- if (!default_mode)
- default_mode = &db[0];
-
- if (!default_bpp)
- default_bpp = 8;
-
- /* Did the user specify a video mode? */
- if (!mode_option)
- mode_option = fb_mode_option;
- if (mode_option) {
- const char *name = mode_option;
- unsigned int namelen = strlen(name);
- int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
- unsigned int xres = 0, yres = 0, bpp = default_bpp, refresh = 0;
- int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0;
- u32 best, diff, tdiff;
-
- for (i = namelen-1; i >= 0; i--) {
- switch (name[i]) {
- case '@':
- namelen = i;
- if (!refresh_specified && !bpp_specified &&
- !yres_specified) {
- refresh = simple_strtol(&name[i+1], NULL, 10);
- refresh_specified = 1;
- if (cvt || rb)
- cvt = 0;
- } else
- goto done;
- break;
- case '-':
- namelen = i;
- if (!bpp_specified && !yres_specified) {
- bpp = simple_strtol(&name[i+1], NULL, 10);
- bpp_specified = 1;
- if (cvt || rb)
- cvt = 0;
- } else
- goto done;
- break;
- case 'x':
- if (!yres_specified) {
- yres = simple_strtol(&name[i+1], NULL, 10);
- yres_specified = 1;
- } else
- goto done;
- break;
- case '0' ... '9':
- break;
- case 'M':
- if (!yres_specified)
- cvt = 1;
- break;
- case 'R':
- if (!cvt)
- rb = 1;
- break;
- case 'm':
- if (!cvt)
- margins = 1;
- break;
- case 'i':
- if (!cvt)
- interlace = 1;
- break;
- default:
- goto done;
- }
- }
- if (i < 0 && yres_specified) {
- xres = simple_strtol(name, NULL, 10);
- res_specified = 1;
- }
-done:
- if (cvt) {
- struct fb_videomode cvt_mode;
- int ret;
-
- DPRINTK("CVT mode %dx%d@%dHz%s%s%s\n", xres, yres,
- (refresh) ? refresh : 60, (rb) ? " reduced blanking" :
- "", (margins) ? " with margins" : "", (interlace) ?
- " interlaced" : "");
-
- memset(&cvt_mode, 0, sizeof(cvt_mode));
- cvt_mode.xres = xres;
- cvt_mode.yres = yres;
- cvt_mode.refresh = (refresh) ? refresh : 60;
-
- if (interlace)
- cvt_mode.vmode |= FB_VMODE_INTERLACED;
- else
- cvt_mode.vmode &= ~FB_VMODE_INTERLACED;
-
- ret = fb_find_mode_cvt(&cvt_mode, margins, rb);
-
- if (!ret && !fb_try_mode(var, info, &cvt_mode, bpp)) {
- DPRINTK("modedb CVT: CVT mode ok\n");
- return 1;
- }
-
- DPRINTK("CVT mode invalid, getting mode from database\n");
+ /* Set up defaults */
+ if (!db) {
+ db = modedb;
+ dbsize = ARRAY_SIZE(modedb);
}
- DPRINTK("Trying specified video mode%s %ix%i\n",
- refresh_specified ? "" : " (ignoring refresh rate)", xres, yres);
+ if (!default_mode)
+ default_mode = &db[0];
- if (!refresh_specified) {
- /*
- * If the caller has provided a custom mode database and a
- * valid monspecs structure, we look for the mode with the
- * highest refresh rate. Otherwise we play it safe it and
- * try to find a mode with a refresh rate closest to the
- * standard 60 Hz.
- */
- if (db != modedb &&
- info->monspecs.vfmin && info->monspecs.vfmax &&
- info->monspecs.hfmin && info->monspecs.hfmax &&
- info->monspecs.dclkmax) {
- refresh = 1000;
- } else {
- refresh = 60;
+ if (!default_bpp)
+ default_bpp = 8;
+
+ /* Did the user specify a video mode? */
+ if (!mode_option)
+ mode_option = fb_mode_option;
+ if (mode_option) {
+ const char *name = mode_option;
+ unsigned int namelen = strlen(name);
+ int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
+ unsigned int xres = 0, yres = 0, bpp = default_bpp, refresh = 0;
+ int yres_specified = 0, cvt = 0, rb = 0, interlace = 0;
+ int margins = 0;
+ u32 best, diff, tdiff;
+
+ for (i = namelen-1; i >= 0; i--) {
+ switch (name[i]) {
+ case '@':
+ namelen = i;
+ if (!refresh_specified && !bpp_specified &&
+ !yres_specified) {
+ refresh = simple_strtol(&name[i+1], NULL,
+ 10);
+ refresh_specified = 1;
+ if (cvt || rb)
+ cvt = 0;
+ } else
+ goto done;
+ break;
+ case '-':
+ namelen = i;
+ if (!bpp_specified && !yres_specified) {
+ bpp = simple_strtol(&name[i+1], NULL,
+ 10);
+ bpp_specified = 1;
+ if (cvt || rb)
+ cvt = 0;
+ } else
+ goto done;
+ break;
+ case 'x':
+ if (!yres_specified) {
+ yres = simple_strtol(&name[i+1], NULL,
+ 10);
+ yres_specified = 1;
+ } else
+ goto done;
+ break;
+ case '0' ... '9':
+ break;
+ case 'M':
+ if (!yres_specified)
+ cvt = 1;
+ break;
+ case 'R':
+ if (!cvt)
+ rb = 1;
+ break;
+ case 'm':
+ if (!cvt)
+ margins = 1;
+ break;
+ case 'i':
+ if (!cvt)
+ interlace = 1;
+ break;
+ default:
+ goto done;
+ }
}
- }
+ if (i < 0 && yres_specified) {
+ xres = simple_strtol(name, NULL, 10);
+ res_specified = 1;
+ }
+done:
+ if (cvt) {
+ struct fb_videomode cvt_mode;
+ int ret;
- diff = -1;
- best = -1;
- for (i = 0; i < dbsize; i++) {
- if ((name_matches(db[i], name, namelen) ||
- (res_specified && res_matches(db[i], xres, yres))) &&
- !fb_try_mode(var, info, &db[i], bpp)) {
- if (refresh_specified && db[i].refresh == refresh) {
+ DPRINTK("CVT mode %dx%d@%dHz%s%s%s\n", xres, yres,
+ (refresh) ? refresh : 60,
+ (rb) ? " reduced blanking" : "",
+ (margins) ? " with margins" : "",
+ (interlace) ? " interlaced" : "");
+
+ memset(&cvt_mode, 0, sizeof(cvt_mode));
+ cvt_mode.xres = xres;
+ cvt_mode.yres = yres;
+ cvt_mode.refresh = (refresh) ? refresh : 60;
+
+ if (interlace)
+ cvt_mode.vmode |= FB_VMODE_INTERLACED;
+ else
+ cvt_mode.vmode &= ~FB_VMODE_INTERLACED;
+
+ ret = fb_find_mode_cvt(&cvt_mode, margins, rb);
+
+ if (!ret && !fb_try_mode(var, info, &cvt_mode, bpp)) {
+ DPRINTK("modedb CVT: CVT mode ok\n");
return 1;
+ }
+
+ DPRINTK("CVT mode invalid, getting mode from database\n");
+ }
+
+ DPRINTK("Trying specified video mode%s %ix%i\n",
+ refresh_specified ? "" : " (ignoring refresh rate)",
+ xres, yres);
+
+ if (!refresh_specified) {
+ /*
+ * If the caller has provided a custom mode database and
+ * a valid monspecs structure, we look for the mode with
+ * the highest refresh rate. Otherwise we play it safe
+ * it and try to find a mode with a refresh rate closest
+ * to the standard 60 Hz.
+ */
+ if (db != modedb &&
+ info->monspecs.vfmin && info->monspecs.vfmax &&
+ info->monspecs.hfmin && info->monspecs.hfmax &&
+ info->monspecs.dclkmax) {
+ refresh = 1000;
} else {
+ refresh = 60;
+ }
+ }
+
+ diff = -1;
+ best = -1;
+ for (i = 0; i < dbsize; i++) {
+ if ((name_matches(db[i], name, namelen) ||
+ (res_specified && res_matches(db[i], xres, yres))) &&
+ !fb_try_mode(var, info, &db[i], bpp)) {
+ if (refresh_specified && db[i].refresh == refresh)
+ return 1;
+
if (abs(db[i].refresh - refresh) < diff) {
diff = abs(db[i].refresh - refresh);
best = i;
}
}
}
- }
- if (best != -1) {
- fb_try_mode(var, info, &db[best], bpp);
- return (refresh_specified) ? 2 : 1;
- }
+ if (best != -1) {
+ fb_try_mode(var, info, &db[best], bpp);
+ return (refresh_specified) ? 2 : 1;
+ }
- diff = 2 * (xres + yres);
- best = -1;
- DPRINTK("Trying best-fit modes\n");
- for (i = 0; i < dbsize; i++) {
- DPRINTK("Trying %ix%i\n", db[i].xres, db[i].yres);
- if (!fb_try_mode(var, info, &db[i], bpp)) {
- tdiff = abs(db[i].xres - xres) +
- abs(db[i].yres - yres);
+ diff = 2 * (xres + yres);
+ best = -1;
+ DPRINTK("Trying best-fit modes\n");
+ for (i = 0; i < dbsize; i++) {
+ DPRINTK("Trying %ix%i\n", db[i].xres, db[i].yres);
+ if (!fb_try_mode(var, info, &db[i], bpp)) {
+ tdiff = abs(db[i].xres - xres) +
+ abs(db[i].yres - yres);
- /*
- * Penalize modes with resolutions smaller
- * than requested.
- */
- if (xres > db[i].xres || yres > db[i].yres)
- tdiff += xres + yres;
+ /*
+ * Penalize modes with resolutions smaller
+ * than requested.
+ */
+ if (xres > db[i].xres || yres > db[i].yres)
+ tdiff += xres + yres;
- if (diff > tdiff) {
- diff = tdiff;
- best = i;
+ if (diff > tdiff) {
+ diff = tdiff;
+ best = i;
+ }
}
}
+ if (best != -1) {
+ fb_try_mode(var, info, &db[best], bpp);
+ return 5;
+ }
}
- if (best != -1) {
- fb_try_mode(var, info, &db[best], bpp);
- return 5;
- }
- }
- DPRINTK("Trying default video mode\n");
- if (!fb_try_mode(var, info, default_mode, default_bpp))
- return 3;
+ DPRINTK("Trying default video mode\n");
+ if (!fb_try_mode(var, info, default_mode, default_bpp))
+ return 3;
- DPRINTK("Trying all modes\n");
- for (i = 0; i < dbsize; i++)
- if (!fb_try_mode(var, info, &db[i], default_bpp))
- return 4;
+ DPRINTK("Trying all modes\n");
+ for (i = 0; i < dbsize; i++)
+ if (!fb_try_mode(var, info, &db[i], default_bpp))
+ return 4;
- DPRINTK("No valid mode found\n");
- return 0;
+ DPRINTK("No valid mode found\n");
+ return 0;
}
/**
diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c
index 178b072..4527cbf 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/msm/mddi.c
@@ -715,7 +715,7 @@
mddi->int_enable = 0;
mddi_writel(mddi->int_enable, INTEN);
- ret = request_irq(mddi->irq, mddi_isr, IRQF_DISABLED, "mddi",
+ ret = request_irq(mddi->irq, mddi_isr, 0, "mddi",
&mddi->client_data);
if (ret) {
printk(KERN_ERR "mddi: failed to request enable irq!\n");
diff --git a/drivers/video/msm/mdp.c b/drivers/video/msm/mdp.c
index 243d16f..b934477 100644
--- a/drivers/video/msm/mdp.c
+++ b/drivers/video/msm/mdp.c
@@ -421,10 +421,11 @@
clk = clk_get(&pdev->dev, "mdp_clk");
if (IS_ERR(clk)) {
printk(KERN_INFO "mdp: failed to get mdp clk");
- return PTR_ERR(clk);
+ ret = PTR_ERR(clk);
+ goto error_get_clk;
}
- ret = request_irq(mdp->irq, mdp_isr, IRQF_DISABLED, "msm_mdp", mdp);
+ ret = request_irq(mdp->irq, mdp_isr, 0, "msm_mdp", mdp);
if (ret)
goto error_request_irq;
disable_irq(mdp->irq);
@@ -495,6 +496,7 @@
error_device_register:
free_irq(mdp->irq, mdp);
error_request_irq:
+error_get_clk:
iounmap(mdp->base);
error_get_irq:
error_ioremap:
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 7e3a490..e3406ab 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -382,6 +382,9 @@
uint32_t enabled;
unsigned long flags;
+ if (mx3_fbi->txd == NULL)
+ return;
+
spin_lock_irqsave(&mx3fb->lock, flags);
enabled = sdc_fb_uninit(mx3_fbi);
@@ -986,9 +989,19 @@
{
struct mx3fb_info *mx3_fbi = fbi->par;
struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ int was_blank = mx3_fbi->blank;
mx3_fbi->blank = blank;
+ /* Attention!
+ * Do not call sdc_disable_channel() for a channel that is disabled
+ * already! This will result in a kernel NULL pointer dereference
+ * (mx3_fbi->txd is NULL). Hide the fact, that all blank modes are
+ * handled equally by this driver.
+ */
+ if (blank > FB_BLANK_UNBLANK && was_blank > FB_BLANK_UNBLANK)
+ return;
+
switch (blank) {
case FB_BLANK_POWERDOWN:
case FB_BLANK_VSYNC_SUSPEND:
@@ -1062,15 +1075,15 @@
y_bottom = var->yoffset;
if (!(var->vmode & FB_VMODE_YWRAP))
- y_bottom += var->yres;
+ y_bottom += fbi->var.yres;
if (y_bottom > fbi->var.yres_virtual)
return -EINVAL;
mutex_lock(&mx3_fbi->mutex);
- offset = (var->yoffset * var->xres_virtual + var->xoffset) *
- (var->bits_per_pixel / 8);
+ offset = var->yoffset * fbi->fix.line_length
+ + var->xoffset * (fbi->var.bits_per_pixel / 8);
base = fbi->fix.smem_start + offset;
dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 0b2f2dd..d837d63 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -39,6 +39,7 @@
* the required value in the imx_fb_videomode structure.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index 588527a..feea7b1 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -1185,8 +1185,8 @@
DBG("neofb_update_start");
- Base = (var->yoffset * var->xres_virtual + var->xoffset) >> 2;
- Base *= (var->bits_per_pixel + 7) / 8;
+ Base = (var->yoffset * info->var.xres_virtual + var->xoffset) >> 2;
+ Base *= (info->var.bits_per_pixel + 7) / 8;
neoUnlock();
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
index 0fff597..d1fbbd8 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/nuc900fb.c
@@ -39,7 +39,6 @@
#include <mach/regs-clock.h>
#include <mach/regs-ldm.h>
#include <mach/fb.h>
-#include <mach/clkdev.h>
#include "nuc900fb.h"
@@ -588,7 +587,7 @@
fbinfo->flags = FBINFO_FLAG_DEFAULT;
fbinfo->pseudo_palette = &fbi->pseudo_pal;
- ret = request_irq(irq, nuc900fb_irqhandler, IRQF_DISABLED,
+ ret = request_irq(irq, nuc900fb_irqhandler, 0,
pdev->name, fbinfo);
if (ret) {
dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 196fa2e..84ff232 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -9,35 +9,6 @@
help
Frame buffer driver for OMAP based boards.
-config FB_OMAP_LCD_VGA
- bool "Use LCD in VGA mode"
- depends on MACH_OMAP_3430SDP || MACH_OMAP_LDP
- help
- Set LCD resolution as VGA (640 X 480).
- Default resolution without this option is QVGA(320 X 240).
- Please take a look at drivers/video/omap/lcd_ldp.c file
- for lcd driver code.
-choice
- depends on FB_OMAP && MACH_OVERO
- prompt "Screen resolution"
- default FB_OMAP_079M3R
- help
- Selected desired screen resolution
-
-config FB_OMAP_031M3R
- boolean "640 x 480 @ 60 Hz Reduced blanking"
-
-config FB_OMAP_048M3R
- boolean "800 x 600 @ 60 Hz Reduced blanking"
-
-config FB_OMAP_079M3R
- boolean "1024 x 768 @ 60 Hz Reduced blanking"
-
-config FB_OMAP_092M9R
- boolean "1280 x 720 @ 60 Hz Reduced blanking"
-
-endchoice
-
config FB_OMAP_LCDC_EXTERNAL
bool "External LCD controller support"
depends on FB_OMAP
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 25db556..ef78550 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -17,7 +17,6 @@
objs-y$(CONFIG_FB_OMAP_LCDC_BLIZZARD) += blizzard.o
objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
-objs-y$(CONFIG_MACH_OMAP_H4) += lcd_h4.o
objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
objs-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
objs-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
@@ -26,14 +25,7 @@
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
-objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
-objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
-objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o
-objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
-objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
-objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o
objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
deleted file mode 100644
index e3eccc9..0000000
--- a/drivers/video/omap/lcd_2430sdp.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * LCD panel support for the TI 2430SDP board
- *
- * Copyright (C) 2007 MontaVista
- * Author: Hunyue Yau <hyau@mvista.com>
- *
- * Derived from drivers/video/omap/lcd-apollon.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-
-#include <plat/mux.h>
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
-#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
-#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24
-#define SDP3430_LCD_PANEL_ENABLE_GPIO 28
-
-static unsigned backlight_gpio;
-static unsigned enable_gpio;
-
-#define LCD_PIXCLOCK_MAX 5400 /* freq 5.4 MHz */
-#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
-#define ENABLE_VAUX2_DEDICATED 0x09
-#define ENABLE_VAUX2_DEV_GRP 0x20
-#define ENABLE_VAUX3_DEDICATED 0x03
-#define ENABLE_VAUX3_DEV_GRP 0x20
-
-#define ENABLE_VPLL2_DEDICATED 0x05
-#define ENABLE_VPLL2_DEV_GRP 0xE0
-#define TWL4030_VPLL2_DEV_GRP 0x33
-#define TWL4030_VPLL2_DEDICATED 0x36
-
-#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
-
-
-static int sdp2430_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- if (machine_is_omap_3430sdp()) {
- enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
- backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
- } else {
- enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO;
- backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO;
- }
-
- gpio_request(enable_gpio, "LCD enable"); /* LCD panel */
- gpio_request(backlight_gpio, "LCD bl"); /* LCD backlight */
- gpio_direction_output(enable_gpio, 0);
- gpio_direction_output(backlight_gpio, 0);
-
- return 0;
-}
-
-static void sdp2430_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(backlight_gpio);
- gpio_free(enable_gpio);
-}
-
-static int sdp2430_panel_enable(struct lcd_panel *panel)
-{
- u8 ded_val, ded_reg;
- u8 grp_val, grp_reg;
-
- if (machine_is_omap_3430sdp()) {
- ded_reg = TWL4030_VAUX3_DEDICATED;
- ded_val = ENABLE_VAUX3_DEDICATED;
- grp_reg = TWL4030_VAUX3_DEV_GRP;
- grp_val = ENABLE_VAUX3_DEV_GRP;
-
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
- TWL4030_VPLL2_DEDICATED);
- t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
- TWL4030_VPLL2_DEV_GRP);
- }
- } else {
- ded_reg = TWL4030_VAUX2_DEDICATED;
- ded_val = ENABLE_VAUX2_DEDICATED;
- grp_reg = TWL4030_VAUX2_DEV_GRP;
- grp_val = ENABLE_VAUX2_DEV_GRP;
- }
-
- gpio_set_value(enable_gpio, 1);
- gpio_set_value(backlight_gpio, 1);
-
- if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
- return -EIO;
- if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
- return -EIO;
-
- return 0;
-}
-
-static void sdp2430_panel_disable(struct lcd_panel *panel)
-{
- gpio_set_value(enable_gpio, 0);
- gpio_set_value(backlight_gpio, 0);
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
- t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
- msleep(4);
- }
-}
-
-static unsigned long sdp2430_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel sdp2430_panel = {
- .name = "sdp2430",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC,
-
- .bpp = 16,
- .data_lines = 16,
- .x_res = 240,
- .y_res = 320,
- .hsw = 3, /* hsync_len (4) - 1 */
- .hfp = 3, /* right_margin (4) - 1 */
- .hbp = 39, /* left_margin (40) - 1 */
- .vsw = 1, /* vsync_len (2) - 1 */
- .vfp = 2, /* lower_margin */
- .vbp = 7, /* upper_margin (8) - 1 */
-
- .pixel_clock = LCD_PIXCLOCK_MAX,
-
- .init = sdp2430_panel_init,
- .cleanup = sdp2430_panel_cleanup,
- .enable = sdp2430_panel_enable,
- .disable = sdp2430_panel_disable,
- .get_caps = sdp2430_panel_get_caps,
-};
-
-static int sdp2430_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&sdp2430_panel);
- return 0;
-}
-
-static int sdp2430_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int sdp2430_panel_suspend(struct platform_device *pdev,
- pm_message_t mesg)
-{
- return 0;
-}
-
-static int sdp2430_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver sdp2430_panel_driver = {
- .probe = sdp2430_panel_probe,
- .remove = sdp2430_panel_remove,
- .suspend = sdp2430_panel_suspend,
- .resume = sdp2430_panel_resume,
- .driver = {
- .name = "sdp2430_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init sdp2430_panel_drv_init(void)
-{
- return platform_driver_register(&sdp2430_panel_driver);
-}
-
-static void __exit sdp2430_panel_drv_exit(void)
-{
- platform_driver_unregister(&sdp2430_panel_driver);
-}
-
-module_init(sdp2430_panel_drv_init);
-module_exit(sdp2430_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
deleted file mode 100644
index 10459d8..0000000
--- a/drivers/video/omap/lcd_apollon.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * LCD panel support for the Samsung OMAP2 Apollon board
- *
- * Copyright (C) 2005,2006 Samsung Electronics
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Derived from drivers/video/omap/lcd-h4.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/gpio.h>
-
-#include "omapfb.h"
-
-/* #define USE_35INCH_LCD 1 */
-
-static int apollon_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void apollon_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static int apollon_panel_enable(struct lcd_panel *panel)
-{
- return 0;
-}
-
-static void apollon_panel_disable(struct lcd_panel *panel)
-{
-}
-
-static unsigned long apollon_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel apollon_panel = {
- .name = "apollon",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC,
-
- .bpp = 16,
- .data_lines = 18,
-#ifdef USE_35INCH_LCD
- .x_res = 240,
- .y_res = 320,
- .hsw = 2,
- .hfp = 3,
- .hbp = 9,
- .vsw = 4,
- .vfp = 3,
- .vbp = 5,
-#else
- .x_res = 480,
- .y_res = 272,
- .hsw = 41,
- .hfp = 2,
- .hbp = 2,
- .vsw = 10,
- .vfp = 2,
- .vbp = 2,
-#endif
- .pixel_clock = 6250,
-
- .init = apollon_panel_init,
- .cleanup = apollon_panel_cleanup,
- .enable = apollon_panel_enable,
- .disable = apollon_panel_disable,
- .get_caps = apollon_panel_get_caps,
-};
-
-static int apollon_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&apollon_panel);
- return 0;
-}
-
-static int apollon_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int apollon_panel_suspend(struct platform_device *pdev,
- pm_message_t mesg)
-{
- return 0;
-}
-
-static int apollon_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver apollon_panel_driver = {
- .probe = apollon_panel_probe,
- .remove = apollon_panel_remove,
- .suspend = apollon_panel_suspend,
- .resume = apollon_panel_resume,
- .driver = {
- .name = "apollon_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init apollon_panel_drv_init(void)
-{
- return platform_driver_register(&apollon_panel_driver);
-}
-
-static void __exit apollon_panel_drv_exit(void)
-{
- platform_driver_unregister(&apollon_panel_driver);
-}
-
-module_init(apollon_panel_drv_init);
-module_exit(apollon_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 8df6887..622ad83 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,7 +23,7 @@
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
deleted file mode 100644
index 03a06a9..0000000
--- a/drivers/video/omap/lcd_h4.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * LCD panel support for the TI OMAP H4 board
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include "omapfb.h"
-
-static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void h4_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static int h4_panel_enable(struct lcd_panel *panel)
-{
- return 0;
-}
-
-static void h4_panel_disable(struct lcd_panel *panel)
-{
-}
-
-static unsigned long h4_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-static struct lcd_panel h4_panel = {
- .name = "h4",
- .config = OMAP_LCDC_PANEL_TFT,
-
- .bpp = 16,
- .data_lines = 16,
- .x_res = 240,
- .y_res = 320,
- .pixel_clock = 6250,
- .hsw = 15,
- .hfp = 15,
- .hbp = 60,
- .vsw = 1,
- .vfp = 1,
- .vbp = 1,
-
- .init = h4_panel_init,
- .cleanup = h4_panel_cleanup,
- .enable = h4_panel_enable,
- .disable = h4_panel_disable,
- .get_caps = h4_panel_get_caps,
-};
-
-static int h4_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&h4_panel);
- return 0;
-}
-
-static int h4_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int h4_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int h4_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-static struct platform_driver h4_panel_driver = {
- .probe = h4_panel_probe,
- .remove = h4_panel_remove,
- .suspend = h4_panel_suspend,
- .resume = h4_panel_resume,
- .driver = {
- .name = "lcd_h4",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init h4_panel_drv_init(void)
-{
- return platform_driver_register(&h4_panel_driver);
-}
-
-static void __exit h4_panel_drv_cleanup(void)
-{
- platform_driver_unregister(&h4_panel_driver);
-}
-
-module_init(h4_panel_drv_init);
-module_exit(h4_panel_drv_cleanup);
-
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 9fff86f..12cc52a 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,7 +22,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
deleted file mode 100644
index 0f5952c..0000000
--- a/drivers/video/omap/lcd_ldp.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * LCD panel support for the TI LDP board
- *
- * Copyright (C) 2007 WindRiver
- * Author: Stanley Miao <stanley.miao@windriver.com>
- *
- * Derived from drivers/video/omap/lcd-2430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/gpio.h>
-#include <plat/mux.h>
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES)
-#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
-
-#define LCD_PANEL_RESET_GPIO 55
-#define LCD_PANEL_QVGA_GPIO 56
-
-#ifdef CONFIG_FB_OMAP_LCD_VGA
-#define LCD_XRES 480
-#define LCD_YRES 640
-#define LCD_PIXCLOCK_MAX 41700
-#else
-#define LCD_XRES 240
-#define LCD_YRES 320
-#define LCD_PIXCLOCK_MAX 185186
-#endif
-
-#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
-#define ENABLE_VAUX2_DEDICATED 0x09
-#define ENABLE_VAUX2_DEV_GRP 0x20
-#define ENABLE_VAUX3_DEDICATED 0x03
-#define ENABLE_VAUX3_DEV_GRP 0x20
-
-#define ENABLE_VPLL2_DEDICATED 0x05
-#define ENABLE_VPLL2_DEV_GRP 0xE0
-#define TWL4030_VPLL2_DEV_GRP 0x33
-#define TWL4030_VPLL2_DEDICATED 0x36
-
-#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
-
-
-static int ldp_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- gpio_request(LCD_PANEL_RESET_GPIO, "lcd reset");
- gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga");
- gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd panel");
- gpio_request(LCD_PANEL_BACKLIGHT_GPIO, "lcd backlight");
-
- gpio_direction_output(LCD_PANEL_QVGA_GPIO, 0);
- gpio_direction_output(LCD_PANEL_RESET_GPIO, 0);
- gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
-
-#ifdef CONFIG_FB_OMAP_LCD_VGA
- gpio_set_value(LCD_PANEL_QVGA_GPIO, 0);
-#else
- gpio_set_value(LCD_PANEL_QVGA_GPIO, 1);
-#endif
- gpio_set_value(LCD_PANEL_RESET_GPIO, 1);
-
- return 0;
-}
-
-static void ldp_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_PANEL_BACKLIGHT_GPIO);
- gpio_free(LCD_PANEL_ENABLE_GPIO);
- gpio_free(LCD_PANEL_QVGA_GPIO);
- gpio_free(LCD_PANEL_RESET_GPIO);
-}
-
-static int ldp_panel_enable(struct lcd_panel *panel)
-{
- if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
- TWL4030_VPLL2_DEDICATED))
- return -EIO;
- if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
- TWL4030_VPLL2_DEV_GRP))
- return -EIO;
-
- gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1);
- gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 1);
-
- if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEDICATED,
- TWL4030_VAUX3_DEDICATED))
- return -EIO;
- if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEV_GRP,
- TWL4030_VAUX3_DEV_GRP))
- return -EIO;
-
- return 0;
-}
-
-static void ldp_panel_disable(struct lcd_panel *panel)
-{
- gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
-
- t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
- t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
- msleep(4);
-}
-
-static unsigned long ldp_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel ldp_panel = {
- .name = "ldp",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC,
-
- .bpp = 16,
- .data_lines = 18,
- .x_res = LCD_XRES,
- .y_res = LCD_YRES,
- .hsw = 3, /* hsync_len (4) - 1 */
- .hfp = 3, /* right_margin (4) - 1 */
- .hbp = 39, /* left_margin (40) - 1 */
- .vsw = 1, /* vsync_len (2) - 1 */
- .vfp = 2, /* lower_margin */
- .vbp = 7, /* upper_margin (8) - 1 */
-
- .pixel_clock = LCD_PIXCLOCK_MAX,
-
- .init = ldp_panel_init,
- .cleanup = ldp_panel_cleanup,
- .enable = ldp_panel_enable,
- .disable = ldp_panel_disable,
- .get_caps = ldp_panel_get_caps,
-};
-
-static int ldp_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&ldp_panel);
- return 0;
-}
-
-static int ldp_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int ldp_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int ldp_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver ldp_panel_driver = {
- .probe = ldp_panel_probe,
- .remove = ldp_panel_remove,
- .suspend = ldp_panel_suspend,
- .resume = ldp_panel_resume,
- .driver = {
- .name = "ldp_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init ldp_panel_drv_init(void)
-{
- return platform_driver_register(&ldp_panel_driver);
-}
-
-static void __exit ldp_panel_drv_exit(void)
-{
- platform_driver_unregister(&ldp_panel_driver);
-}
-
-module_init(ldp_panel_drv_init);
-module_exit(ldp_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c
deleted file mode 100644
index d7c6c3e..0000000
--- a/drivers/video/omap/lcd_omap3beagle.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * LCD panel support for the TI OMAP3 Beagle board
- *
- * Author: Koen Kooi <koen@openembedded.org>
- *
- * Derived from drivers/video/omap/lcd-omap3evm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_PANEL_ENABLE_GPIO 170
-
-static int omap3beagle_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable");
- return 0;
-}
-
-static void omap3beagle_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_PANEL_ENABLE_GPIO);
-}
-
-static int omap3beagle_panel_enable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
- return 0;
-}
-
-static void omap3beagle_panel_disable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
-}
-
-static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel omap3beagle_panel = {
- .name = "omap3beagle",
- .config = OMAP_LCDC_PANEL_TFT,
-
- .bpp = 16,
- .data_lines = 24,
- .x_res = 1024,
- .y_res = 768,
- .hsw = 3, /* hsync_len (4) - 1 */
- .hfp = 3, /* right_margin (4) - 1 */
- .hbp = 39, /* left_margin (40) - 1 */
- .vsw = 1, /* vsync_len (2) - 1 */
- .vfp = 2, /* lower_margin */
- .vbp = 7, /* upper_margin (8) - 1 */
-
- .pixel_clock = 64000,
-
- .init = omap3beagle_panel_init,
- .cleanup = omap3beagle_panel_cleanup,
- .enable = omap3beagle_panel_enable,
- .disable = omap3beagle_panel_disable,
- .get_caps = omap3beagle_panel_get_caps,
-};
-
-static int omap3beagle_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&omap3beagle_panel);
- return 0;
-}
-
-static int omap3beagle_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int omap3beagle_panel_suspend(struct platform_device *pdev,
- pm_message_t mesg)
-{
- return 0;
-}
-
-static int omap3beagle_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver omap3beagle_panel_driver = {
- .probe = omap3beagle_panel_probe,
- .remove = omap3beagle_panel_remove,
- .suspend = omap3beagle_panel_suspend,
- .resume = omap3beagle_panel_resume,
- .driver = {
- .name = "omap3beagle_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init omap3beagle_panel_drv_init(void)
-{
- return platform_driver_register(&omap3beagle_panel_driver);
-}
-
-static void __exit omap3beagle_panel_drv_exit(void)
-{
- platform_driver_unregister(&omap3beagle_panel_driver);
-}
-
-module_init(omap3beagle_panel_drv_init);
-module_exit(omap3beagle_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c
deleted file mode 100644
index 06840da..0000000
--- a/drivers/video/omap/lcd_omap3evm.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * LCD panel support for the TI OMAP3 EVM board
- *
- * Author: Steve Sakoman <steve@sakoman.com>
- *
- * Derived from drivers/video/omap/lcd-apollon.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-
-#include <plat/mux.h>
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_PANEL_ENABLE_GPIO 153
-#define LCD_PANEL_LR 2
-#define LCD_PANEL_UD 3
-#define LCD_PANEL_INI 152
-#define LCD_PANEL_QVGA 154
-#define LCD_PANEL_RESB 155
-
-#define ENABLE_VDAC_DEDICATED 0x03
-#define ENABLE_VDAC_DEV_GRP 0x20
-#define ENABLE_VPLL2_DEDICATED 0x05
-#define ENABLE_VPLL2_DEV_GRP 0xE0
-
-#define TWL_LED_LEDEN 0x00
-#define TWL_PWMA_PWMAON 0x00
-#define TWL_PWMA_PWMAOFF 0x01
-
-static unsigned int bklight_level;
-
-static int omap3evm_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- gpio_request(LCD_PANEL_LR, "LCD lr");
- gpio_request(LCD_PANEL_UD, "LCD ud");
- gpio_request(LCD_PANEL_INI, "LCD ini");
- gpio_request(LCD_PANEL_RESB, "LCD resb");
- gpio_request(LCD_PANEL_QVGA, "LCD qvga");
-
- gpio_direction_output(LCD_PANEL_RESB, 1);
- gpio_direction_output(LCD_PANEL_INI, 1);
- gpio_direction_output(LCD_PANEL_QVGA, 0);
- gpio_direction_output(LCD_PANEL_LR, 1);
- gpio_direction_output(LCD_PANEL_UD, 1);
-
- twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
- twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
- twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
- bklight_level = 100;
-
- return 0;
-}
-
-static void omap3evm_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_PANEL_QVGA);
- gpio_free(LCD_PANEL_RESB);
- gpio_free(LCD_PANEL_INI);
- gpio_free(LCD_PANEL_UD);
- gpio_free(LCD_PANEL_LR);
-}
-
-static int omap3evm_panel_enable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
- return 0;
-}
-
-static void omap3evm_panel_disable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
-}
-
-static unsigned long omap3evm_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-static int omap3evm_bklight_setlevel(struct lcd_panel *panel,
- unsigned int level)
-{
- u8 c;
- if ((level >= 0) && (level <= 100)) {
- c = (125 * (100 - level)) / 100 + 2;
- twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
- bklight_level = level;
- }
- return 0;
-}
-
-static unsigned int omap3evm_bklight_getlevel(struct lcd_panel *panel)
-{
- return bklight_level;
-}
-
-static unsigned int omap3evm_bklight_getmaxlevel(struct lcd_panel *panel)
-{
- return 100;
-}
-
-struct lcd_panel omap3evm_panel = {
- .name = "omap3evm",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC,
-
- .bpp = 16,
- .data_lines = 18,
- .x_res = 480,
- .y_res = 640,
- .hsw = 3, /* hsync_len (4) - 1 */
- .hfp = 3, /* right_margin (4) - 1 */
- .hbp = 39, /* left_margin (40) - 1 */
- .vsw = 1, /* vsync_len (2) - 1 */
- .vfp = 2, /* lower_margin */
- .vbp = 7, /* upper_margin (8) - 1 */
-
- .pixel_clock = 26000,
-
- .init = omap3evm_panel_init,
- .cleanup = omap3evm_panel_cleanup,
- .enable = omap3evm_panel_enable,
- .disable = omap3evm_panel_disable,
- .get_caps = omap3evm_panel_get_caps,
- .set_bklight_level = omap3evm_bklight_setlevel,
- .get_bklight_level = omap3evm_bklight_getlevel,
- .get_bklight_max = omap3evm_bklight_getmaxlevel,
-};
-
-static int omap3evm_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&omap3evm_panel);
- return 0;
-}
-
-static int omap3evm_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int omap3evm_panel_suspend(struct platform_device *pdev,
- pm_message_t mesg)
-{
- return 0;
-}
-
-static int omap3evm_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver omap3evm_panel_driver = {
- .probe = omap3evm_panel_probe,
- .remove = omap3evm_panel_remove,
- .suspend = omap3evm_panel_suspend,
- .resume = omap3evm_panel_resume,
- .driver = {
- .name = "omap3evm_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init omap3evm_panel_drv_init(void)
-{
- return platform_driver_register(&omap3evm_panel_driver);
-}
-
-static void __exit omap3evm_panel_drv_exit(void)
-{
- platform_driver_unregister(&omap3evm_panel_driver);
-}
-
-module_init(omap3evm_panel_drv_init);
-module_exit(omap3evm_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index b87e8b8..6f8d13c 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
deleted file mode 100644
index 564933f..0000000
--- a/drivers/video/omap/lcd_overo.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * LCD panel support for the Gumstix Overo
- *
- * Author: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/gpio.h>
-#include <plat/mux.h>
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_ENABLE 144
-
-static int overo_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- if ((gpio_request(LCD_ENABLE, "LCD_ENABLE") == 0) &&
- (gpio_direction_output(LCD_ENABLE, 1) == 0))
- gpio_export(LCD_ENABLE, 0);
- else
- printk(KERN_ERR "could not obtain gpio for LCD_ENABLE\n");
-
- return 0;
-}
-
-static void overo_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_ENABLE);
-}
-
-static int overo_panel_enable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_ENABLE, 1);
- return 0;
-}
-
-static void overo_panel_disable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_ENABLE, 0);
-}
-
-static unsigned long overo_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel overo_panel = {
- .name = "overo",
- .config = OMAP_LCDC_PANEL_TFT,
- .bpp = 16,
- .data_lines = 24,
-
-#if defined CONFIG_FB_OMAP_031M3R
-
- /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
- .x_res = 640,
- .y_res = 480,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 7,
- .pixel_clock = 23500,
-
-#elif defined CONFIG_FB_OMAP_048M3R
-
- /* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */
- .x_res = 800,
- .y_res = 600,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 11,
- .pixel_clock = 35500,
-
-#elif defined CONFIG_FB_OMAP_079M3R
-
- /* 1024 x 768 @ 60 Hz Reduced blanking VESA CVT 0.79M3-R */
- .x_res = 1024,
- .y_res = 768,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 15,
- .pixel_clock = 56000,
-
-#elif defined CONFIG_FB_OMAP_092M9R
-
- /* 1280 x 720 @ 60 Hz Reduced blanking VESA CVT 0.92M9-R */
- .x_res = 1280,
- .y_res = 720,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 5,
- .vbp = 13,
- .pixel_clock = 64000,
-
-#else
-
- /* use 640 x 480 if no config option */
- /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
- .x_res = 640,
- .y_res = 480,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 7,
- .pixel_clock = 23500,
-
-#endif
-
- .init = overo_panel_init,
- .cleanup = overo_panel_cleanup,
- .enable = overo_panel_enable,
- .disable = overo_panel_disable,
- .get_caps = overo_panel_get_caps,
-};
-
-static int overo_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&overo_panel);
- return 0;
-}
-
-static int overo_panel_remove(struct platform_device *pdev)
-{
- /* omapfb does not have unregister_panel */
- return 0;
-}
-
-static struct platform_driver overo_panel_driver = {
- .probe = overo_panel_probe,
- .remove = overo_panel_remove,
- .driver = {
- .name = "overo_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init overo_panel_drv_init(void)
-{
- return platform_driver_register(&overo_panel_driver);
-}
-
-static void __exit overo_panel_drv_exit(void)
-{
- platform_driver_unregister(&overo_panel_driver);
-}
-
-module_init(overo_panel_drv_init);
-module_exit(overo_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index ff0e6d7..b51b332 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,7 +29,7 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
static int palmtt_panel_init(struct lcd_panel *panel,
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 609a280..8d8e1fe 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -10,6 +10,13 @@
Supports LCD Panel used in TI SDP3430 and EVM boards,
OMAP3517 EVM boards and CM-T35.
+config PANEL_DVI
+ tristate "DVI output"
+ depends on OMAP2_DSS_DPI
+ help
+ Driver for external monitors, connected via DVI. The driver uses i2c
+ to read EDID information from the monitor.
+
config PANEL_LGPHILIPS_LB035Q02
tristate "LG.Philips LB035Q02 LCD Panel"
depends on OMAP2_DSS_DPI && SPI
@@ -19,20 +26,30 @@
config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on OMAP2_DSS_DPI
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
help
LCD Panel used in TI's SDP3430 and EVM boards
config PANEL_NEC_NL8048HL11_01B
tristate "NEC NL8048HL11-01B Panel"
depends on OMAP2_DSS_DPI
+ depends on SPI
+ depends on BACKLIGHT_CLASS_DEVICE
help
This NEC NL8048HL11-01B panel is TFT LCD
used in the Zoom2/3/3630 sdp boards.
+config PANEL_PICODLP
+ tristate "TI PICO DLP mini-projector"
+ depends on OMAP2_DSS && I2C
+ help
+ A mini-projector used in TI's SDP4430 and EVM boards
+ For more info please visit http://www.dlp.com/projector/
+
config PANEL_TAAL
tristate "Taal DSI Panel"
depends on OMAP2_DSS_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
help
Taal DSI command mode panel from TPO.
@@ -45,7 +62,14 @@
config PANEL_ACX565AKM
tristate "ACX565AKM Panel"
depends on OMAP2_DSS_SDI && SPI
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
help
This is the LCD panel used on Nokia N900
+
+config PANEL_N8X0
+ tristate "N8X0 Panel"
+ depends on OMAP2_DSS_RFBI && SPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ This is the LCD panel used on Nokia N8x0
endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 0f601ab3a..fbfafc6 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,8 +1,11 @@
obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
+obj-$(CONFIG_PANEL_DVI) += panel-dvi.o
obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+obj-$(CONFIG_PANEL_PICODLP) += panel-picodlp.o
obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
+obj-$(CONFIG_PANEL_N8X0) += panel-n8x0.o
diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-dvi.c
new file mode 100644
index 0000000..03eb14a
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-dvi.c
@@ -0,0 +1,363 @@
+/*
+ * DVI output support
+ *
+ * Copyright (C) 2011 Texas Instruments Inc
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <video/omapdss.h>
+#include <linux/i2c.h>
+#include <drm/drm_edid.h>
+
+#include <video/omap-panel-dvi.h>
+
+static const struct omap_video_timings panel_dvi_default_timings = {
+ .x_res = 640,
+ .y_res = 480,
+
+ .pixel_clock = 23500,
+
+ .hfp = 48,
+ .hsw = 32,
+ .hbp = 80,
+
+ .vfp = 3,
+ .vsw = 4,
+ .vbp = 7,
+};
+
+struct panel_drv_data {
+ struct omap_dss_device *dssdev;
+
+ struct mutex lock;
+};
+
+static inline struct panel_dvi_platform_data
+*get_pdata(const struct omap_dss_device *dssdev)
+{
+ return dssdev->data;
+}
+
+static int panel_dvi_power_on(struct omap_dss_device *dssdev)
+{
+ struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+ int r;
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+ return 0;
+
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
+ if (pdata->platform_enable) {
+ r = pdata->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
+ return r;
+}
+
+static void panel_dvi_power_off(struct omap_dss_device *dssdev)
+{
+ struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+ return;
+
+ if (pdata->platform_disable)
+ pdata->platform_disable(dssdev);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
+static int panel_dvi_probe(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata;
+
+ ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ dssdev->panel.timings = panel_dvi_default_timings;
+ dssdev->panel.config = OMAP_DSS_LCD_TFT;
+
+ ddata->dssdev = dssdev;
+ mutex_init(&ddata->lock);
+
+ dev_set_drvdata(&dssdev->dev, ddata);
+
+ return 0;
+}
+
+static void __exit panel_dvi_remove(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&ddata->lock);
+
+ dev_set_drvdata(&dssdev->dev, NULL);
+
+ mutex_unlock(&ddata->lock);
+
+ kfree(ddata);
+}
+
+static int panel_dvi_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ mutex_lock(&ddata->lock);
+
+ r = panel_dvi_power_on(dssdev);
+ if (r == 0)
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ mutex_unlock(&ddata->lock);
+
+ return r;
+}
+
+static void panel_dvi_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&ddata->lock);
+
+ panel_dvi_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+ mutex_unlock(&ddata->lock);
+}
+
+static int panel_dvi_suspend(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&ddata->lock);
+
+ panel_dvi_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+}
+
+static int panel_dvi_resume(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ mutex_lock(&ddata->lock);
+
+ r = panel_dvi_power_on(dssdev);
+ if (r == 0)
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ mutex_unlock(&ddata->lock);
+
+ return r;
+}
+
+static void panel_dvi_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&ddata->lock);
+ dpi_set_timings(dssdev, timings);
+ mutex_unlock(&ddata->lock);
+}
+
+static void panel_dvi_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&ddata->lock);
+ *timings = dssdev->panel.timings;
+ mutex_unlock(&ddata->lock);
+}
+
+static int panel_dvi_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ mutex_lock(&ddata->lock);
+ r = dpi_check_timings(dssdev, timings);
+ mutex_unlock(&ddata->lock);
+
+ return r;
+}
+
+
+static int panel_dvi_ddc_read(struct i2c_adapter *adapter,
+ unsigned char *buf, u16 count, u8 offset)
+{
+ int r, retries;
+
+ for (retries = 3; retries > 0; retries--) {
+ struct i2c_msg msgs[] = {
+ {
+ .addr = DDC_ADDR,
+ .flags = 0,
+ .len = 1,
+ .buf = &offset,
+ }, {
+ .addr = DDC_ADDR,
+ .flags = I2C_M_RD,
+ .len = count,
+ .buf = buf,
+ }
+ };
+
+ r = i2c_transfer(adapter, msgs, 2);
+ if (r == 2)
+ return 0;
+
+ if (r != -EAGAIN)
+ break;
+ }
+
+ return r < 0 ? r : -EIO;
+}
+
+static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
+ u8 *edid, int len)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+ struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+ struct i2c_adapter *adapter;
+ int r, l, bytes_read;
+
+ mutex_lock(&ddata->lock);
+
+ if (pdata->i2c_bus_num == 0) {
+ r = -ENODEV;
+ goto err;
+ }
+
+ adapter = i2c_get_adapter(pdata->i2c_bus_num);
+ if (!adapter) {
+ dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
+ pdata->i2c_bus_num);
+ r = -EINVAL;
+ goto err;
+ }
+
+ l = min(EDID_LENGTH, len);
+ r = panel_dvi_ddc_read(adapter, edid, l, 0);
+ if (r)
+ goto err;
+
+ bytes_read = l;
+
+ /* if there are extensions, read second block */
+ if (len > EDID_LENGTH && edid[0x7e] > 0) {
+ l = min(EDID_LENGTH, len - EDID_LENGTH);
+
+ r = panel_dvi_ddc_read(adapter, edid + EDID_LENGTH,
+ l, EDID_LENGTH);
+ if (r)
+ goto err;
+
+ bytes_read += l;
+ }
+
+ mutex_unlock(&ddata->lock);
+
+ return bytes_read;
+
+err:
+ mutex_unlock(&ddata->lock);
+ return r;
+}
+
+static bool panel_dvi_detect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
+ struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+ struct i2c_adapter *adapter;
+ unsigned char out;
+ int r;
+
+ mutex_lock(&ddata->lock);
+
+ if (pdata->i2c_bus_num == 0)
+ goto out;
+
+ adapter = i2c_get_adapter(pdata->i2c_bus_num);
+ if (!adapter)
+ goto out;
+
+ r = panel_dvi_ddc_read(adapter, &out, 1, 0);
+
+ mutex_unlock(&ddata->lock);
+
+ return r == 0;
+
+out:
+ mutex_unlock(&ddata->lock);
+ return true;
+}
+
+static struct omap_dss_driver panel_dvi_driver = {
+ .probe = panel_dvi_probe,
+ .remove = __exit_p(panel_dvi_remove),
+
+ .enable = panel_dvi_enable,
+ .disable = panel_dvi_disable,
+ .suspend = panel_dvi_suspend,
+ .resume = panel_dvi_resume,
+
+ .set_timings = panel_dvi_set_timings,
+ .get_timings = panel_dvi_get_timings,
+ .check_timings = panel_dvi_check_timings,
+
+ .read_edid = panel_dvi_read_edid,
+ .detect = panel_dvi_detect,
+
+ .driver = {
+ .name = "dvi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init panel_dvi_init(void)
+{
+ return omap_dss_register_driver(&panel_dvi_driver);
+}
+
+static void __exit panel_dvi_exit(void)
+{
+ omap_dss_unregister_driver(&panel_dvi_driver);
+}
+
+module_init(panel_dvi_init);
+module_exit(panel_dvi_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 9c90f75..519c47d 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -58,30 +58,6 @@
/* Panel configurations */
static struct panel_config generic_dpi_panels[] = {
- /* Generic Panel */
- {
- {
- .x_res = 640,
- .y_res = 480,
-
- .pixel_clock = 23500,
-
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
-
- .vfp = 3,
- .vsw = 4,
- .vbp = 7,
- },
- .acbi = 0x0,
- .acb = 0x0,
- .config = OMAP_DSS_LCD_TFT,
- .power_on_delay = 0,
- .power_off_delay = 0,
- .name = "generic",
- },
-
/* Sharp LQ043T1DG01 */
{
{
@@ -232,6 +208,95 @@
.power_off_delay = 0,
.name = "powertip_ph480272t",
},
+
+ /* Innolux AT070TN83 */
+ {
+ {
+ .x_res = 800,
+ .y_res = 480,
+
+ .pixel_clock = 40000,
+
+ .hsw = 48,
+ .hfp = 1,
+ .hbp = 1,
+
+ .vsw = 3,
+ .vfp = 12,
+ .vbp = 25,
+ },
+ .acbi = 0x0,
+ .acb = 0x28,
+ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS,
+ .power_on_delay = 0,
+ .power_off_delay = 0,
+ .name = "innolux_at070tn83",
+ },
+
+ /* NEC NL2432DR22-11B */
+ {
+ {
+ .x_res = 240,
+ .y_res = 320,
+
+ .pixel_clock = 5400,
+
+ .hsw = 3,
+ .hfp = 3,
+ .hbp = 39,
+
+ .vsw = 1,
+ .vfp = 2,
+ .vbp = 7,
+ },
+ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS,
+ .name = "nec_nl2432dr22-11b",
+ },
+
+ /* Unknown panel used in OMAP H4 */
+ {
+ {
+ .x_res = 240,
+ .y_res = 320,
+
+ .pixel_clock = 6250,
+
+ .hsw = 15,
+ .hfp = 15,
+ .hbp = 60,
+
+ .vsw = 1,
+ .vfp = 1,
+ .vbp = 1,
+ },
+ .config = OMAP_DSS_LCD_TFT,
+
+ .name = "h4",
+ },
+
+ /* Unknown panel used in Samsung OMAP2 Apollon */
+ {
+ {
+ .x_res = 480,
+ .y_res = 272,
+
+ .pixel_clock = 6250,
+
+ .hsw = 41,
+ .hfp = 2,
+ .hbp = 2,
+
+ .vsw = 10,
+ .vfp = 2,
+ .vbp = 2,
+ },
+ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS,
+
+ .name = "apollon",
+ },
};
struct panel_drv_data {
diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
new file mode 100644
index 0000000..150e8ba
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -0,0 +1,747 @@
+/* #define DEBUG */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-n8x0.h>
+
+#define BLIZZARD_REV_CODE 0x00
+#define BLIZZARD_CONFIG 0x02
+#define BLIZZARD_PLL_DIV 0x04
+#define BLIZZARD_PLL_LOCK_RANGE 0x06
+#define BLIZZARD_PLL_CLOCK_SYNTH_0 0x08
+#define BLIZZARD_PLL_CLOCK_SYNTH_1 0x0a
+#define BLIZZARD_PLL_MODE 0x0c
+#define BLIZZARD_CLK_SRC 0x0e
+#define BLIZZARD_MEM_BANK0_ACTIVATE 0x10
+#define BLIZZARD_MEM_BANK0_STATUS 0x14
+#define BLIZZARD_PANEL_CONFIGURATION 0x28
+#define BLIZZARD_HDISP 0x2a
+#define BLIZZARD_HNDP 0x2c
+#define BLIZZARD_VDISP0 0x2e
+#define BLIZZARD_VDISP1 0x30
+#define BLIZZARD_VNDP 0x32
+#define BLIZZARD_HSW 0x34
+#define BLIZZARD_VSW 0x38
+#define BLIZZARD_DISPLAY_MODE 0x68
+#define BLIZZARD_INPUT_WIN_X_START_0 0x6c
+#define BLIZZARD_DATA_SOURCE_SELECT 0x8e
+#define BLIZZARD_DISP_MEM_DATA_PORT 0x90
+#define BLIZZARD_DISP_MEM_READ_ADDR0 0x92
+#define BLIZZARD_POWER_SAVE 0xE6
+#define BLIZZARD_NDISP_CTRL_STATUS 0xE8
+
+/* Data source select */
+/* For S1D13745 */
+#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND 0x00
+#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE 0x01
+#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE 0x04
+#define BLIZZARD_SRC_DISABLE_OVERLAY 0x05
+/* For S1D13744 */
+#define BLIZZARD_SRC_WRITE_LCD 0x00
+#define BLIZZARD_SRC_BLT_LCD 0x06
+
+#define BLIZZARD_COLOR_RGB565 0x01
+#define BLIZZARD_COLOR_YUV420 0x09
+
+#define BLIZZARD_VERSION_S1D13745 0x01 /* Hailstorm */
+#define BLIZZARD_VERSION_S1D13744 0x02 /* Blizzard */
+
+#define MIPID_CMD_READ_DISP_ID 0x04
+#define MIPID_CMD_READ_RED 0x06
+#define MIPID_CMD_READ_GREEN 0x07
+#define MIPID_CMD_READ_BLUE 0x08
+#define MIPID_CMD_READ_DISP_STATUS 0x09
+#define MIPID_CMD_RDDSDR 0x0F
+#define MIPID_CMD_SLEEP_IN 0x10
+#define MIPID_CMD_SLEEP_OUT 0x11
+#define MIPID_CMD_DISP_OFF 0x28
+#define MIPID_CMD_DISP_ON 0x29
+
+static struct panel_drv_data {
+ struct mutex lock;
+
+ struct omap_dss_device *dssdev;
+ struct spi_device *spidev;
+ struct backlight_device *bldev;
+
+ int blizzard_ver;
+} s_drv_data;
+
+
+static inline
+struct panel_n8x0_data *get_board_data(const struct omap_dss_device *dssdev)
+{
+ return dssdev->data;
+}
+
+static inline
+struct panel_drv_data *get_drv_data(const struct omap_dss_device *dssdev)
+{
+ return &s_drv_data;
+}
+
+
+static inline void blizzard_cmd(u8 cmd)
+{
+ omap_rfbi_write_command(&cmd, 1);
+}
+
+static inline void blizzard_write(u8 cmd, const u8 *buf, int len)
+{
+ omap_rfbi_write_command(&cmd, 1);
+ omap_rfbi_write_data(buf, len);
+}
+
+static inline void blizzard_read(u8 cmd, u8 *buf, int len)
+{
+ omap_rfbi_write_command(&cmd, 1);
+ omap_rfbi_read_data(buf, len);
+}
+
+static u8 blizzard_read_reg(u8 cmd)
+{
+ u8 data;
+ blizzard_read(cmd, &data, 1);
+ return data;
+}
+
+static void blizzard_ctrl_setup_update(struct omap_dss_device *dssdev,
+ int x, int y, int w, int h)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+ u8 tmp[18];
+ int x_end, y_end;
+
+ x_end = x + w - 1;
+ y_end = y + h - 1;
+
+ tmp[0] = x;
+ tmp[1] = x >> 8;
+ tmp[2] = y;
+ tmp[3] = y >> 8;
+ tmp[4] = x_end;
+ tmp[5] = x_end >> 8;
+ tmp[6] = y_end;
+ tmp[7] = y_end >> 8;
+
+ /* scaling? */
+ tmp[8] = x;
+ tmp[9] = x >> 8;
+ tmp[10] = y;
+ tmp[11] = y >> 8;
+ tmp[12] = x_end;
+ tmp[13] = x_end >> 8;
+ tmp[14] = y_end;
+ tmp[15] = y_end >> 8;
+
+ tmp[16] = BLIZZARD_COLOR_RGB565;
+
+ if (ddata->blizzard_ver == BLIZZARD_VERSION_S1D13745)
+ tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND;
+ else
+ tmp[17] = ddata->blizzard_ver == BLIZZARD_VERSION_S1D13744 ?
+ BLIZZARD_SRC_WRITE_LCD :
+ BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
+
+ omap_rfbi_configure(dssdev, 16, 8);
+
+ blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18);
+
+ omap_rfbi_configure(dssdev, 16, 16);
+}
+
+static void mipid_transfer(struct spi_device *spi, int cmd, const u8 *wbuf,
+ int wlen, u8 *rbuf, int rlen)
+{
+ struct spi_message m;
+ struct spi_transfer *x, xfer[4];
+ u16 w;
+ int r;
+
+ spi_message_init(&m);
+
+ memset(xfer, 0, sizeof(xfer));
+ x = &xfer[0];
+
+ cmd &= 0xff;
+ x->tx_buf = &cmd;
+ x->bits_per_word = 9;
+ x->len = 2;
+ spi_message_add_tail(x, &m);
+
+ if (wlen) {
+ x++;
+ x->tx_buf = wbuf;
+ x->len = wlen;
+ x->bits_per_word = 9;
+ spi_message_add_tail(x, &m);
+ }
+
+ if (rlen) {
+ x++;
+ x->rx_buf = &w;
+ x->len = 1;
+ spi_message_add_tail(x, &m);
+
+ if (rlen > 1) {
+ /* Arrange for the extra clock before the first
+ * data bit.
+ */
+ x->bits_per_word = 9;
+ x->len = 2;
+
+ x++;
+ x->rx_buf = &rbuf[1];
+ x->len = rlen - 1;
+ spi_message_add_tail(x, &m);
+ }
+ }
+
+ r = spi_sync(spi, &m);
+ if (r < 0)
+ dev_dbg(&spi->dev, "spi_sync %d\n", r);
+
+ if (rlen)
+ rbuf[0] = w & 0xff;
+}
+
+static inline void mipid_cmd(struct spi_device *spi, int cmd)
+{
+ mipid_transfer(spi, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void mipid_write(struct spi_device *spi,
+ int reg, const u8 *buf, int len)
+{
+ mipid_transfer(spi, reg, buf, len, NULL, 0);
+}
+
+static inline void mipid_read(struct spi_device *spi,
+ int reg, u8 *buf, int len)
+{
+ mipid_transfer(spi, reg, NULL, 0, buf, len);
+}
+
+static void set_data_lines(struct spi_device *spi, int data_lines)
+{
+ u16 par;
+
+ switch (data_lines) {
+ case 16:
+ par = 0x150;
+ break;
+ case 18:
+ par = 0x160;
+ break;
+ case 24:
+ par = 0x170;
+ break;
+ }
+
+ mipid_write(spi, 0x3a, (u8 *)&par, 2);
+}
+
+static void send_init_string(struct spi_device *spi)
+{
+ u16 initpar[] = { 0x0102, 0x0100, 0x0100 };
+ mipid_write(spi, 0xc2, (u8 *)initpar, sizeof(initpar));
+}
+
+static void send_display_on(struct spi_device *spi)
+{
+ mipid_cmd(spi, MIPID_CMD_DISP_ON);
+}
+
+static void send_display_off(struct spi_device *spi)
+{
+ mipid_cmd(spi, MIPID_CMD_DISP_OFF);
+}
+
+static void send_sleep_out(struct spi_device *spi)
+{
+ mipid_cmd(spi, MIPID_CMD_SLEEP_OUT);
+ msleep(120);
+}
+
+static void send_sleep_in(struct spi_device *spi)
+{
+ mipid_cmd(spi, MIPID_CMD_SLEEP_IN);
+ msleep(50);
+}
+
+static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
+{
+ int r;
+ struct panel_n8x0_data *bdata = get_board_data(dssdev);
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+ struct spi_device *spi = ddata->spidev;
+ u8 rev, conf;
+ u8 display_id[3];
+ const char *panel_name;
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+ return 0;
+
+ gpio_direction_output(bdata->ctrl_pwrdown, 1);
+
+ if (bdata->platform_enable) {
+ r = bdata->platform_enable(dssdev);
+ if (r)
+ goto err_plat_en;
+ }
+
+ r = omapdss_rfbi_display_enable(dssdev);
+ if (r)
+ goto err_rfbi_en;
+
+ rev = blizzard_read_reg(BLIZZARD_REV_CODE);
+ conf = blizzard_read_reg(BLIZZARD_CONFIG);
+
+ switch (rev & 0xfc) {
+ case 0x9c:
+ ddata->blizzard_ver = BLIZZARD_VERSION_S1D13744;
+ dev_info(&dssdev->dev, "s1d13744 LCD controller rev %d "
+ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
+ break;
+ case 0xa4:
+ ddata->blizzard_ver = BLIZZARD_VERSION_S1D13745;
+ dev_info(&dssdev->dev, "s1d13745 LCD controller rev %d "
+ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
+ break;
+ default:
+ dev_err(&dssdev->dev, "invalid s1d1374x revision %02x\n", rev);
+ r = -ENODEV;
+ goto err_inv_chip;
+ }
+
+ /* panel */
+
+ gpio_direction_output(bdata->panel_reset, 1);
+
+ mipid_read(spi, MIPID_CMD_READ_DISP_ID, display_id, 3);
+ dev_dbg(&spi->dev, "MIPI display ID: %02x%02x%02x\n",
+ display_id[0], display_id[1], display_id[2]);
+
+ switch (display_id[0]) {
+ case 0x45:
+ panel_name = "lph8923";
+ break;
+ case 0x83:
+ panel_name = "ls041y3";
+ break;
+ default:
+ dev_err(&dssdev->dev, "invalid display ID 0x%x\n",
+ display_id[0]);
+ r = -ENODEV;
+ goto err_inv_panel;
+ }
+
+ dev_info(&dssdev->dev, "%s rev %02x LCD detected\n",
+ panel_name, display_id[1]);
+
+ send_sleep_out(spi);
+ send_init_string(spi);
+ set_data_lines(spi, 24);
+ send_display_on(spi);
+
+ return 0;
+
+err_inv_panel:
+ /*
+ * HACK: we should turn off the panel here, but there is some problem
+ * with the initialization sequence, and we fail to init the panel if we
+ * have turned it off
+ */
+ /* gpio_direction_output(bdata->panel_reset, 0); */
+err_inv_chip:
+ omapdss_rfbi_display_disable(dssdev);
+err_rfbi_en:
+ if (bdata->platform_disable)
+ bdata->platform_disable(dssdev);
+err_plat_en:
+ gpio_direction_output(bdata->ctrl_pwrdown, 0);
+ return r;
+}
+
+static void n8x0_panel_power_off(struct omap_dss_device *dssdev)
+{
+ struct panel_n8x0_data *bdata = get_board_data(dssdev);
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+ struct spi_device *spi = ddata->spidev;
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+ return;
+
+ send_display_off(spi);
+ send_sleep_in(spi);
+
+ if (bdata->platform_disable)
+ bdata->platform_disable(dssdev);
+
+ /*
+ * HACK: we should turn off the panel here, but there is some problem
+ * with the initialization sequence, and we fail to init the panel if we
+ * have turned it off
+ */
+ /* gpio_direction_output(bdata->panel_reset, 0); */
+ gpio_direction_output(bdata->ctrl_pwrdown, 0);
+ omapdss_rfbi_display_disable(dssdev);
+}
+
+static const struct rfbi_timings n8x0_panel_timings = {
+ .cs_on_time = 0,
+
+ .we_on_time = 9000,
+ .we_off_time = 18000,
+ .we_cycle_time = 36000,
+
+ .re_on_time = 9000,
+ .re_off_time = 27000,
+ .re_cycle_time = 36000,
+
+ .access_time = 27000,
+ .cs_off_time = 36000,
+
+ .cs_pulse_width = 0,
+};
+
+static int n8x0_bl_update_status(struct backlight_device *dev)
+{
+ struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
+ struct panel_n8x0_data *bdata = get_board_data(dssdev);
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+ int r;
+ int level;
+
+ mutex_lock(&ddata->lock);
+
+ if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+ dev->props.power == FB_BLANK_UNBLANK)
+ level = dev->props.brightness;
+ else
+ level = 0;
+
+ dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
+
+ if (!bdata->set_backlight)
+ r = -EINVAL;
+ else
+ r = bdata->set_backlight(dssdev, level);
+
+ mutex_unlock(&ddata->lock);
+
+ return r;
+}
+
+static int n8x0_bl_get_intensity(struct backlight_device *dev)
+{
+ if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+ dev->props.power == FB_BLANK_UNBLANK)
+ return dev->props.brightness;
+
+ return 0;
+}
+
+static const struct backlight_ops n8x0_bl_ops = {
+ .get_brightness = n8x0_bl_get_intensity,
+ .update_status = n8x0_bl_update_status,
+};
+
+static int n8x0_panel_probe(struct omap_dss_device *dssdev)
+{
+ struct panel_n8x0_data *bdata = get_board_data(dssdev);
+ struct panel_drv_data *ddata;
+ struct backlight_device *bldev;
+ struct backlight_properties props;
+ int r;
+
+ dev_dbg(&dssdev->dev, "probe\n");
+
+ if (!bdata)
+ return -EINVAL;
+
+ s_drv_data.dssdev = dssdev;
+
+ ddata = &s_drv_data;
+
+ mutex_init(&ddata->lock);
+
+ dssdev->panel.config = OMAP_DSS_LCD_TFT;
+ dssdev->panel.timings.x_res = 800;
+ dssdev->panel.timings.y_res = 480;
+ dssdev->ctrl.pixel_size = 16;
+ dssdev->ctrl.rfbi_timings = n8x0_panel_timings;
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = 127;
+ props.type = BACKLIGHT_PLATFORM;
+ bldev = backlight_device_register(dev_name(&dssdev->dev), &dssdev->dev,
+ dssdev, &n8x0_bl_ops, &props);
+ if (IS_ERR(bldev)) {
+ r = PTR_ERR(bldev);
+ dev_err(&dssdev->dev, "register backlight failed\n");
+ return r;
+ }
+
+ ddata->bldev = bldev;
+
+ bldev->props.fb_blank = FB_BLANK_UNBLANK;
+ bldev->props.power = FB_BLANK_UNBLANK;
+ bldev->props.brightness = 127;
+
+ n8x0_bl_update_status(bldev);
+
+ return 0;
+}
+
+static void n8x0_panel_remove(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+ struct backlight_device *bldev;
+
+ dev_dbg(&dssdev->dev, "remove\n");
+
+ bldev = ddata->bldev;
+ bldev->props.power = FB_BLANK_POWERDOWN;
+ n8x0_bl_update_status(bldev);
+ backlight_device_unregister(bldev);
+
+ dev_set_drvdata(&dssdev->dev, NULL);
+}
+
+static int n8x0_panel_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+ int r;
+
+ dev_dbg(&dssdev->dev, "enable\n");
+
+ mutex_lock(&ddata->lock);
+
+ rfbi_bus_lock();
+
+ r = n8x0_panel_power_on(dssdev);
+
+ rfbi_bus_unlock();
+
+ if (r) {
+ mutex_unlock(&ddata->lock);
+ return r;
+ }
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+}
+
+static void n8x0_panel_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+
+ dev_dbg(&dssdev->dev, "disable\n");
+
+ mutex_lock(&ddata->lock);
+
+ rfbi_bus_lock();
+
+ n8x0_panel_power_off(dssdev);
+
+ rfbi_bus_unlock();
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+ mutex_unlock(&ddata->lock);
+}
+
+static int n8x0_panel_suspend(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+
+ dev_dbg(&dssdev->dev, "suspend\n");
+
+ mutex_lock(&ddata->lock);
+
+ rfbi_bus_lock();
+
+ n8x0_panel_power_off(dssdev);
+
+ rfbi_bus_unlock();
+
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+}
+
+static int n8x0_panel_resume(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+ int r;
+
+ dev_dbg(&dssdev->dev, "resume\n");
+
+ mutex_lock(&ddata->lock);
+
+ rfbi_bus_lock();
+
+ r = n8x0_panel_power_on(dssdev);
+
+ rfbi_bus_unlock();
+
+ if (r) {
+ mutex_unlock(&ddata->lock);
+ return r;
+ }
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+}
+
+static void n8x0_panel_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ *timings = dssdev->panel.timings;
+}
+
+static void n8x0_panel_get_resolution(struct omap_dss_device *dssdev,
+ u16 *xres, u16 *yres)
+{
+ *xres = dssdev->panel.timings.x_res;
+ *yres = dssdev->panel.timings.y_res;
+}
+
+static void update_done(void *data)
+{
+ rfbi_bus_unlock();
+}
+
+static int n8x0_panel_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+
+ dev_dbg(&dssdev->dev, "update\n");
+
+ mutex_lock(&ddata->lock);
+ rfbi_bus_lock();
+
+ omap_rfbi_prepare_update(dssdev, &x, &y, &w, &h);
+
+ blizzard_ctrl_setup_update(dssdev, x, y, w, h);
+
+ omap_rfbi_update(dssdev, x, y, w, h, update_done, NULL);
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+}
+
+static int n8x0_panel_sync(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = get_drv_data(dssdev);
+
+ dev_dbg(&dssdev->dev, "sync\n");
+
+ mutex_lock(&ddata->lock);
+ rfbi_bus_lock();
+ rfbi_bus_unlock();
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+}
+
+static struct omap_dss_driver n8x0_panel_driver = {
+ .probe = n8x0_panel_probe,
+ .remove = n8x0_panel_remove,
+
+ .enable = n8x0_panel_enable,
+ .disable = n8x0_panel_disable,
+ .suspend = n8x0_panel_suspend,
+ .resume = n8x0_panel_resume,
+
+ .update = n8x0_panel_update,
+ .sync = n8x0_panel_sync,
+
+ .get_resolution = n8x0_panel_get_resolution,
+ .get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+ .get_timings = n8x0_panel_get_timings,
+
+ .driver = {
+ .name = "n8x0_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+/* PANEL */
+
+static int mipid_spi_probe(struct spi_device *spi)
+{
+ dev_dbg(&spi->dev, "mipid_spi_probe\n");
+
+ spi->mode = SPI_MODE_0;
+
+ s_drv_data.spidev = spi;
+
+ return 0;
+}
+
+static int mipid_spi_remove(struct spi_device *spi)
+{
+ dev_dbg(&spi->dev, "mipid_spi_remove\n");
+ return 0;
+}
+
+static struct spi_driver mipid_spi_driver = {
+ .driver = {
+ .name = "lcd_mipid",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = mipid_spi_probe,
+ .remove = __devexit_p(mipid_spi_remove),
+};
+
+static int __init n8x0_panel_drv_init(void)
+{
+ int r;
+
+ r = spi_register_driver(&mipid_spi_driver);
+ if (r) {
+ pr_err("n8x0_panel: spi driver registration failed\n");
+ return r;
+ }
+
+ r = omap_dss_register_driver(&n8x0_panel_driver);
+ if (r) {
+ pr_err("n8x0_panel: dss driver registration failed\n");
+ spi_unregister_driver(&mipid_spi_driver);
+ return r;
+ }
+
+ return 0;
+}
+
+static void __exit n8x0_panel_drv_exit(void)
+{
+ spi_unregister_driver(&mipid_spi_driver);
+
+ omap_dss_unregister_driver(&n8x0_panel_driver);
+}
+
+module_init(n8x0_panel_drv_init);
+module_exit(n8x0_panel_drv_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-picodlp.c b/drivers/video/omap2/displays/panel-picodlp.c
new file mode 100644
index 0000000..98ebdad
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-picodlp.c
@@ -0,0 +1,594 @@
+/*
+ * picodlp panel driver
+ * picodlp_i2c_driver: i2c_client driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ * Mayuresh Janorkar <mayur@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-picodlp.h>
+
+#include "panel-picodlp.h"
+
+struct picodlp_data {
+ struct mutex lock;
+ struct i2c_client *picodlp_i2c_client;
+};
+
+static struct i2c_board_info picodlp_i2c_board_info = {
+ I2C_BOARD_INFO("picodlp_i2c_driver", 0x1b),
+};
+
+struct picodlp_i2c_data {
+ struct mutex xfer_lock;
+};
+
+static struct i2c_device_id picodlp_i2c_id[] = {
+ { "picodlp_i2c_driver", 0 },
+};
+
+struct picodlp_i2c_command {
+ u8 reg;
+ u32 value;
+};
+
+static struct omap_video_timings pico_ls_timings = {
+ .x_res = 864,
+ .y_res = 480,
+ .hsw = 7,
+ .hfp = 11,
+ .hbp = 7,
+
+ .pixel_clock = 19200,
+
+ .vsw = 2,
+ .vfp = 3,
+ .vbp = 14,
+};
+
+static inline struct picodlp_panel_data
+ *get_panel_data(const struct omap_dss_device *dssdev)
+{
+ return (struct picodlp_panel_data *) dssdev->data;
+}
+
+static u32 picodlp_i2c_read(struct i2c_client *client, u8 reg)
+{
+ u8 read_cmd[] = {READ_REG_SELECT, reg}, data[4];
+ struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
+ struct i2c_msg msg[2];
+
+ mutex_lock(&picodlp_i2c_data->xfer_lock);
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].len = 2;
+ msg[0].buf = read_cmd;
+
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = 4;
+ msg[1].buf = data;
+
+ i2c_transfer(client->adapter, msg, 2);
+ mutex_unlock(&picodlp_i2c_data->xfer_lock);
+ return (data[3] | (data[2] << 8) | (data[1] << 16) | (data[0] << 24));
+}
+
+static int picodlp_i2c_write_block(struct i2c_client *client,
+ u8 *data, int len)
+{
+ struct i2c_msg msg;
+ int i, r, msg_count = 1;
+
+ struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
+
+ if (len < 1 || len > 32) {
+ dev_err(&client->dev,
+ "too long syn_write_block len %d\n", len);
+ return -EIO;
+ }
+ mutex_lock(&picodlp_i2c_data->xfer_lock);
+
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = len;
+ msg.buf = data;
+ r = i2c_transfer(client->adapter, &msg, msg_count);
+ mutex_unlock(&picodlp_i2c_data->xfer_lock);
+
+ /*
+ * i2c_transfer returns:
+ * number of messages sent in case of success
+ * a negative error number in case of failure
+ */
+ if (r != msg_count)
+ goto err;
+
+ /* In case of success */
+ for (i = 0; i < len; i++)
+ dev_dbg(&client->dev,
+ "addr %x bw 0x%02x[%d]: 0x%02x\n",
+ client->addr, data[0] + i, i, data[i]);
+
+ return 0;
+err:
+ dev_err(&client->dev, "picodlp_i2c_write error\n");
+ return r;
+}
+
+static int picodlp_i2c_write(struct i2c_client *client, u8 reg, u32 value)
+{
+ u8 data[5];
+ int i;
+
+ data[0] = reg;
+ for (i = 1; i < 5; i++)
+ data[i] = (value >> (32 - (i) * 8)) & 0xFF;
+
+ return picodlp_i2c_write_block(client, data, 5);
+}
+
+static int picodlp_i2c_write_array(struct i2c_client *client,
+ const struct picodlp_i2c_command commands[],
+ int count)
+{
+ int i, r = 0;
+ for (i = 0; i < count; i++) {
+ r = picodlp_i2c_write(client, commands[i].reg,
+ commands[i].value);
+ if (r)
+ return r;
+ }
+ return r;
+}
+
+static int picodlp_wait_for_dma_done(struct i2c_client *client)
+{
+ u8 trial = 100;
+
+ do {
+ msleep(1);
+ if (!trial--)
+ return -ETIMEDOUT;
+ } while (picodlp_i2c_read(client, MAIN_STATUS) & DMA_STATUS);
+
+ return 0;
+}
+
+/**
+ * picodlp_i2c_init: i2c_initialization routine
+ * client: i2c_client for communication
+ *
+ * return
+ * 0 : Success, no error
+ * error code : Failure
+ */
+static int picodlp_i2c_init(struct i2c_client *client)
+{
+ int r;
+ static const struct picodlp_i2c_command init_cmd_set1[] = {
+ {SOFT_RESET, 1},
+ {DMD_PARK_TRIGGER, 1},
+ {MISC_REG, 5},
+ {SEQ_CONTROL, 0},
+ {SEQ_VECTOR, 0x100},
+ {DMD_BLOCK_COUNT, 7},
+ {DMD_VCC_CONTROL, 0x109},
+ {DMD_PARK_PULSE_COUNT, 0xA},
+ {DMD_PARK_PULSE_WIDTH, 0xB},
+ {DMD_PARK_DELAY, 0x2ED},
+ {DMD_SHADOW_ENABLE, 0},
+ {FLASH_OPCODE, 0xB},
+ {FLASH_DUMMY_BYTES, 1},
+ {FLASH_ADDR_BYTES, 3},
+ {PBC_CONTROL, 0},
+ {FLASH_START_ADDR, CMT_LUT_0_START_ADDR},
+ {FLASH_READ_BYTES, CMT_LUT_0_SIZE},
+ {CMT_SPLASH_LUT_START_ADDR, 0},
+ {CMT_SPLASH_LUT_DEST_SELECT, CMT_LUT_ALL},
+ {PBC_CONTROL, 1},
+ };
+
+ static const struct picodlp_i2c_command init_cmd_set2[] = {
+ {PBC_CONTROL, 0},
+ {CMT_SPLASH_LUT_DEST_SELECT, 0},
+ {PBC_CONTROL, 0},
+ {FLASH_START_ADDR, SEQUENCE_0_START_ADDR},
+ {FLASH_READ_BYTES, SEQUENCE_0_SIZE},
+ {SEQ_RESET_LUT_START_ADDR, 0},
+ {SEQ_RESET_LUT_DEST_SELECT, SEQ_SEQ_LUT},
+ {PBC_CONTROL, 1},
+ };
+
+ static const struct picodlp_i2c_command init_cmd_set3[] = {
+ {PBC_CONTROL, 0},
+ {SEQ_RESET_LUT_DEST_SELECT, 0},
+ {PBC_CONTROL, 0},
+ {FLASH_START_ADDR, DRC_TABLE_0_START_ADDR},
+ {FLASH_READ_BYTES, DRC_TABLE_0_SIZE},
+ {SEQ_RESET_LUT_START_ADDR, 0},
+ {SEQ_RESET_LUT_DEST_SELECT, SEQ_DRC_LUT_ALL},
+ {PBC_CONTROL, 1},
+ };
+
+ static const struct picodlp_i2c_command init_cmd_set4[] = {
+ {PBC_CONTROL, 0},
+ {SEQ_RESET_LUT_DEST_SELECT, 0},
+ {SDC_ENABLE, 1},
+ {AGC_CTRL, 7},
+ {CCA_C1A, 0x100},
+ {CCA_C1B, 0x0},
+ {CCA_C1C, 0x0},
+ {CCA_C2A, 0x0},
+ {CCA_C2B, 0x100},
+ {CCA_C2C, 0x0},
+ {CCA_C3A, 0x0},
+ {CCA_C3B, 0x0},
+ {CCA_C3C, 0x100},
+ {CCA_C7A, 0x100},
+ {CCA_C7B, 0x100},
+ {CCA_C7C, 0x100},
+ {CCA_ENABLE, 1},
+ {CPU_IF_MODE, 1},
+ {SHORT_FLIP, 1},
+ {CURTAIN_CONTROL, 0},
+ {DMD_PARK_TRIGGER, 0},
+ {R_DRIVE_CURRENT, 0x298},
+ {G_DRIVE_CURRENT, 0x298},
+ {B_DRIVE_CURRENT, 0x298},
+ {RGB_DRIVER_ENABLE, 7},
+ {SEQ_CONTROL, 0},
+ {ACTGEN_CONTROL, 0x10},
+ {SEQUENCE_MODE, SEQ_LOCK},
+ {DATA_FORMAT, RGB888},
+ {INPUT_RESOLUTION, WVGA_864_LANDSCAPE},
+ {INPUT_SOURCE, PARALLEL_RGB},
+ {CPU_IF_SYNC_METHOD, 1},
+ {SEQ_CONTROL, 1}
+ };
+
+ r = picodlp_i2c_write_array(client, init_cmd_set1,
+ ARRAY_SIZE(init_cmd_set1));
+ if (r)
+ return r;
+
+ r = picodlp_wait_for_dma_done(client);
+ if (r)
+ return r;
+
+ r = picodlp_i2c_write_array(client, init_cmd_set2,
+ ARRAY_SIZE(init_cmd_set2));
+ if (r)
+ return r;
+
+ r = picodlp_wait_for_dma_done(client);
+ if (r)
+ return r;
+
+ r = picodlp_i2c_write_array(client, init_cmd_set3,
+ ARRAY_SIZE(init_cmd_set3));
+ if (r)
+ return r;
+
+ r = picodlp_wait_for_dma_done(client);
+ if (r)
+ return r;
+
+ r = picodlp_i2c_write_array(client, init_cmd_set4,
+ ARRAY_SIZE(init_cmd_set4));
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int picodlp_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct picodlp_i2c_data *picodlp_i2c_data;
+
+ picodlp_i2c_data = kzalloc(sizeof(struct picodlp_i2c_data), GFP_KERNEL);
+
+ if (!picodlp_i2c_data)
+ return -ENOMEM;
+
+ mutex_init(&picodlp_i2c_data->xfer_lock);
+ i2c_set_clientdata(client, picodlp_i2c_data);
+
+ return 0;
+}
+
+static int picodlp_i2c_remove(struct i2c_client *client)
+{
+ struct picodlp_i2c_data *picodlp_i2c_data =
+ i2c_get_clientdata(client);
+ kfree(picodlp_i2c_data);
+ return 0;
+}
+
+static struct i2c_driver picodlp_i2c_driver = {
+ .driver = {
+ .name = "picodlp_i2c_driver",
+ },
+ .probe = picodlp_i2c_probe,
+ .remove = picodlp_i2c_remove,
+ .id_table = picodlp_i2c_id,
+};
+
+static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
+{
+ int r, trial = 100;
+ struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+ struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ return r;
+ }
+
+ gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
+ msleep(1);
+ gpio_set_value(picodlp_pdata->pwrgood_gpio, 1);
+
+ while (!gpio_get_value(picodlp_pdata->emu_done_gpio)) {
+ if (!trial--) {
+ dev_err(&dssdev->dev, "emu_done signal not"
+ " going high\n");
+ return -ETIMEDOUT;
+ }
+ msleep(5);
+ }
+ /*
+ * As per dpp2600 programming guide,
+ * it is required to sleep for 1000ms after emu_done signal goes high
+ * then only i2c commands can be successfully sent to dpp2600
+ */
+ msleep(1000);
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r) {
+ dev_err(&dssdev->dev, "failed to enable DPI\n");
+ goto err1;
+ }
+
+ r = picodlp_i2c_init(picod->picodlp_i2c_client);
+ if (r)
+ goto err;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return r;
+err:
+ omapdss_dpi_display_disable(dssdev);
+err1:
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ return r;
+}
+
+static void picodlp_panel_power_off(struct omap_dss_device *dssdev)
+{
+ struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
+
+ omapdss_dpi_display_disable(dssdev);
+
+ gpio_set_value(picodlp_pdata->emu_done_gpio, 0);
+ gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
+
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+}
+
+static int picodlp_panel_probe(struct omap_dss_device *dssdev)
+{
+ struct picodlp_data *picod;
+ struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
+ struct i2c_adapter *adapter;
+ struct i2c_client *picodlp_i2c_client;
+ int r = 0, picodlp_adapter_id;
+
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_ONOFF |
+ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IVS;
+ dssdev->panel.acb = 0x0;
+ dssdev->panel.timings = pico_ls_timings;
+
+ picod = kzalloc(sizeof(struct picodlp_data), GFP_KERNEL);
+ if (!picod)
+ return -ENOMEM;
+
+ mutex_init(&picod->lock);
+
+ picodlp_adapter_id = picodlp_pdata->picodlp_adapter_id;
+
+ adapter = i2c_get_adapter(picodlp_adapter_id);
+ if (!adapter) {
+ dev_err(&dssdev->dev, "can't get i2c adapter\n");
+ r = -ENODEV;
+ goto err;
+ }
+
+ picodlp_i2c_client = i2c_new_device(adapter, &picodlp_i2c_board_info);
+ if (!picodlp_i2c_client) {
+ dev_err(&dssdev->dev, "can't add i2c device::"
+ " picodlp_i2c_client is NULL\n");
+ r = -ENODEV;
+ goto err;
+ }
+
+ picod->picodlp_i2c_client = picodlp_i2c_client;
+
+ dev_set_drvdata(&dssdev->dev, picod);
+ return r;
+err:
+ kfree(picod);
+ return r;
+}
+
+static void picodlp_panel_remove(struct omap_dss_device *dssdev)
+{
+ struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+ i2c_unregister_device(picod->picodlp_i2c_client);
+ dev_set_drvdata(&dssdev->dev, NULL);
+ dev_dbg(&dssdev->dev, "removing picodlp panel\n");
+
+ kfree(picod);
+}
+
+static int picodlp_panel_enable(struct omap_dss_device *dssdev)
+{
+ struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ dev_dbg(&dssdev->dev, "enabling picodlp panel\n");
+
+ mutex_lock(&picod->lock);
+ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+ mutex_unlock(&picod->lock);
+ return -EINVAL;
+ }
+
+ r = picodlp_panel_power_on(dssdev);
+ mutex_unlock(&picod->lock);
+
+ return r;
+}
+
+static void picodlp_panel_disable(struct omap_dss_device *dssdev)
+{
+ struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&picod->lock);
+ /* Turn off DLP Power */
+ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+ picodlp_panel_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+ mutex_unlock(&picod->lock);
+
+ dev_dbg(&dssdev->dev, "disabling picodlp panel\n");
+}
+
+static int picodlp_panel_suspend(struct omap_dss_device *dssdev)
+{
+ struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+ mutex_lock(&picod->lock);
+ /* Turn off DLP Power */
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+ mutex_unlock(&picod->lock);
+ dev_err(&dssdev->dev, "unable to suspend picodlp panel,"
+ " panel is not ACTIVE\n");
+ return -EINVAL;
+ }
+
+ picodlp_panel_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+ mutex_unlock(&picod->lock);
+
+ dev_dbg(&dssdev->dev, "suspending picodlp panel\n");
+ return 0;
+}
+
+static int picodlp_panel_resume(struct omap_dss_device *dssdev)
+{
+ struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ mutex_lock(&picod->lock);
+ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
+ mutex_unlock(&picod->lock);
+ dev_err(&dssdev->dev, "unable to resume picodlp panel,"
+ " panel is not ACTIVE\n");
+ return -EINVAL;
+ }
+
+ r = picodlp_panel_power_on(dssdev);
+ mutex_unlock(&picod->lock);
+ dev_dbg(&dssdev->dev, "resuming picodlp panel\n");
+ return r;
+}
+
+static void picodlp_get_resolution(struct omap_dss_device *dssdev,
+ u16 *xres, u16 *yres)
+{
+ *xres = dssdev->panel.timings.x_res;
+ *yres = dssdev->panel.timings.y_res;
+}
+
+static struct omap_dss_driver picodlp_driver = {
+ .probe = picodlp_panel_probe,
+ .remove = picodlp_panel_remove,
+
+ .enable = picodlp_panel_enable,
+ .disable = picodlp_panel_disable,
+
+ .get_resolution = picodlp_get_resolution,
+
+ .suspend = picodlp_panel_suspend,
+ .resume = picodlp_panel_resume,
+
+ .driver = {
+ .name = "picodlp_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init picodlp_init(void)
+{
+ int r = 0;
+
+ r = i2c_add_driver(&picodlp_i2c_driver);
+ if (r) {
+ printk(KERN_WARNING "picodlp_i2c_driver" \
+ " registration failed\n");
+ return r;
+ }
+
+ r = omap_dss_register_driver(&picodlp_driver);
+ if (r)
+ i2c_del_driver(&picodlp_i2c_driver);
+
+ return r;
+}
+
+static void __exit picodlp_exit(void)
+{
+ i2c_del_driver(&picodlp_i2c_driver);
+ omap_dss_unregister_driver(&picodlp_driver);
+}
+
+module_init(picodlp_init);
+module_exit(picodlp_exit);
+
+MODULE_AUTHOR("Mythri P K <mythripk@ti.com>");
+MODULE_DESCRIPTION("picodlp driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-picodlp.h b/drivers/video/omap2/displays/panel-picodlp.h
new file mode 100644
index 0000000..a34b431
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-picodlp.h
@@ -0,0 +1,288 @@
+/*
+ * Header file required by picodlp panel driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
+#define __OMAP2_DISPLAY_PANEL_PICODLP_H
+
+/* Commands used for configuring picodlp panel */
+
+#define MAIN_STATUS 0x03
+#define PBC_CONTROL 0x08
+#define INPUT_SOURCE 0x0B
+#define INPUT_RESOLUTION 0x0C
+#define DATA_FORMAT 0x0D
+#define IMG_ROTATION 0x0E
+#define LONG_FLIP 0x0F
+#define SHORT_FLIP 0x10
+#define TEST_PAT_SELECT 0x11
+#define R_DRIVE_CURRENT 0x12
+#define G_DRIVE_CURRENT 0x13
+#define B_DRIVE_CURRENT 0x14
+#define READ_REG_SELECT 0x15
+#define RGB_DRIVER_ENABLE 0x16
+
+#define CPU_IF_MODE 0x18
+#define FRAME_RATE 0x19
+#define CPU_IF_SYNC_METHOD 0x1A
+#define CPU_IF_SOF 0x1B
+#define CPU_IF_EOF 0x1C
+#define CPU_IF_SLEEP 0x1D
+
+#define SEQUENCE_MODE 0x1E
+#define SOFT_RESET 0x1F
+#define FRONT_END_RESET 0x21
+#define AUTO_PWR_ENABLE 0x22
+
+#define VSYNC_LINE_DELAY 0x23
+#define CPU_PI_HORIZ_START 0x24
+#define CPU_PI_VERT_START 0x25
+#define CPU_PI_HORIZ_WIDTH 0x26
+#define CPU_PI_VERT_HEIGHT 0x27
+
+#define PIXEL_MASK_CROP 0x28
+#define CROP_FIRST_LINE 0x29
+#define CROP_LAST_LINE 0x2A
+#define CROP_FIRST_PIXEL 0x2B
+#define CROP_LAST_PIXEL 0x2C
+#define DMD_PARK_TRIGGER 0x2D
+
+#define MISC_REG 0x30
+
+/* AGC registers */
+#define AGC_CTRL 0x50
+#define AGC_CLIPPED_PIXS 0x55
+#define AGC_BRIGHT_PIXS 0x56
+#define AGC_BG_PIXS 0x57
+#define AGC_SAFETY_MARGIN 0x17
+
+/* Color Coordinate Adjustment registers */
+#define CCA_ENABLE 0x5E
+#define CCA_C1A 0x5F
+#define CCA_C1B 0x60
+#define CCA_C1C 0x61
+#define CCA_C2A 0x62
+#define CCA_C2B 0x63
+#define CCA_C2C 0x64
+#define CCA_C3A 0x65
+#define CCA_C3B 0x66
+#define CCA_C3C 0x67
+#define CCA_C7A 0x71
+#define CCA_C7B 0x72
+#define CCA_C7C 0x73
+
+/**
+ * DLP Pico Processor 2600 comes with flash
+ * We can do DMA operations from flash for accessing Look Up Tables
+ */
+#define DMA_STATUS 0x100
+#define FLASH_ADDR_BYTES 0x74
+#define FLASH_DUMMY_BYTES 0x75
+#define FLASH_WRITE_BYTES 0x76
+#define FLASH_READ_BYTES 0x77
+#define FLASH_OPCODE 0x78
+#define FLASH_START_ADDR 0x79
+#define FLASH_DUMMY2 0x7A
+#define FLASH_WRITE_DATA 0x7B
+
+#define TEMPORAL_DITH_DISABLE 0x7E
+#define SEQ_CONTROL 0x82
+#define SEQ_VECTOR 0x83
+
+/* DMD is Digital Micromirror Device */
+#define DMD_BLOCK_COUNT 0x84
+#define DMD_VCC_CONTROL 0x86
+#define DMD_PARK_PULSE_COUNT 0x87
+#define DMD_PARK_PULSE_WIDTH 0x88
+#define DMD_PARK_DELAY 0x89
+#define DMD_SHADOW_ENABLE 0x8E
+#define SEQ_STATUS 0x8F
+#define FLASH_CLOCK_CONTROL 0x98
+#define DMD_PARK 0x2D
+
+#define SDRAM_BIST_ENABLE 0x46
+#define DDR_DRIVER_STRENGTH 0x9A
+#define SDC_ENABLE 0x9D
+#define SDC_BUFF_SWAP_DISABLE 0xA3
+#define CURTAIN_CONTROL 0xA6
+#define DDR_BUS_SWAP_ENABLE 0xA7
+#define DMD_TRC_ENABLE 0xA8
+#define DMD_BUS_SWAP_ENABLE 0xA9
+
+#define ACTGEN_ENABLE 0xAE
+#define ACTGEN_CONTROL 0xAF
+#define ACTGEN_HORIZ_BP 0xB0
+#define ACTGEN_VERT_BP 0xB1
+
+/* Look Up Table access */
+#define CMT_SPLASH_LUT_START_ADDR 0xFA
+#define CMT_SPLASH_LUT_DEST_SELECT 0xFB
+#define CMT_SPLASH_LUT_DATA 0xFC
+#define SEQ_RESET_LUT_START_ADDR 0xFD
+#define SEQ_RESET_LUT_DEST_SELECT 0xFE
+#define SEQ_RESET_LUT_DATA 0xFF
+
+/* Input source definitions */
+#define PARALLEL_RGB 0
+#define INT_TEST_PATTERN 1
+#define SPLASH_SCREEN 2
+#define CPU_INTF 3
+#define BT656 4
+
+/* Standard input resolution definitions */
+#define QWVGA_LANDSCAPE 3 /* (427h*240v) */
+#define WVGA_864_LANDSCAPE 21 /* (864h*480v) */
+#define WVGA_DMD_OPTICAL_TEST 35 /* (608h*684v) */
+
+/* Standard data format definitions */
+#define RGB565 0
+#define RGB666 1
+#define RGB888 2
+
+/* Test Pattern definitions */
+#define TPG_CHECKERBOARD 0
+#define TPG_BLACK 1
+#define TPG_WHITE 2
+#define TPG_RED 3
+#define TPG_BLUE 4
+#define TPG_GREEN 5
+#define TPG_VLINES_BLACK 6
+#define TPG_HLINES_BLACK 7
+#define TPG_VLINES_ALT 8
+#define TPG_HLINES_ALT 9
+#define TPG_DIAG_LINES 10
+#define TPG_GREYRAMP_VERT 11
+#define TPG_GREYRAMP_HORIZ 12
+#define TPG_ANSI_CHECKERBOARD 13
+
+/* sequence mode definitions */
+#define SEQ_FREE_RUN 0
+#define SEQ_LOCK 1
+
+/* curtain color definitions */
+#define CURTAIN_BLACK 0
+#define CURTAIN_RED 1
+#define CURTAIN_GREEN 2
+#define CURTAIN_BLUE 3
+#define CURTAIN_YELLOW 4
+#define CURTAIN_MAGENTA 5
+#define CURTAIN_CYAN 6
+#define CURTAIN_WHITE 7
+
+/* LUT definitions */
+#define CMT_LUT_NONE 0
+#define CMT_LUT_GREEN 1
+#define CMT_LUT_RED 2
+#define CMT_LUT_BLUE 3
+#define CMT_LUT_ALL 4
+#define SPLASH_LUT 5
+
+#define SEQ_LUT_NONE 0
+#define SEQ_DRC_LUT_0 1
+#define SEQ_DRC_LUT_1 2
+#define SEQ_DRC_LUT_2 3
+#define SEQ_DRC_LUT_3 4
+#define SEQ_SEQ_LUT 5
+#define SEQ_DRC_LUT_ALL 6
+#define WPC_PROGRAM_LUT 7
+
+#define BITSTREAM_START_ADDR 0x00000000
+#define BITSTREAM_SIZE 0x00040000
+
+#define WPC_FW_0_START_ADDR 0x00040000
+#define WPC_FW_0_SIZE 0x00000ce8
+
+#define SEQUENCE_0_START_ADDR 0x00044000
+#define SEQUENCE_0_SIZE 0x00001000
+
+#define SEQUENCE_1_START_ADDR 0x00045000
+#define SEQUENCE_1_SIZE 0x00000d10
+
+#define SEQUENCE_2_START_ADDR 0x00046000
+#define SEQUENCE_2_SIZE 0x00000d10
+
+#define SEQUENCE_3_START_ADDR 0x00047000
+#define SEQUENCE_3_SIZE 0x00000d10
+
+#define SEQUENCE_4_START_ADDR 0x00048000
+#define SEQUENCE_4_SIZE 0x00000d10
+
+#define SEQUENCE_5_START_ADDR 0x00049000
+#define SEQUENCE_5_SIZE 0x00000d10
+
+#define SEQUENCE_6_START_ADDR 0x0004a000
+#define SEQUENCE_6_SIZE 0x00000d10
+
+#define CMT_LUT_0_START_ADDR 0x0004b200
+#define CMT_LUT_0_SIZE 0x00000600
+
+#define CMT_LUT_1_START_ADDR 0x0004b800
+#define CMT_LUT_1_SIZE 0x00000600
+
+#define CMT_LUT_2_START_ADDR 0x0004be00
+#define CMT_LUT_2_SIZE 0x00000600
+
+#define CMT_LUT_3_START_ADDR 0x0004c400
+#define CMT_LUT_3_SIZE 0x00000600
+
+#define CMT_LUT_4_START_ADDR 0x0004ca00
+#define CMT_LUT_4_SIZE 0x00000600
+
+#define CMT_LUT_5_START_ADDR 0x0004d000
+#define CMT_LUT_5_SIZE 0x00000600
+
+#define CMT_LUT_6_START_ADDR 0x0004d600
+#define CMT_LUT_6_SIZE 0x00000600
+
+#define DRC_TABLE_0_START_ADDR 0x0004dc00
+#define DRC_TABLE_0_SIZE 0x00000100
+
+#define SPLASH_0_START_ADDR 0x0004dd00
+#define SPLASH_0_SIZE 0x00032280
+
+#define SEQUENCE_7_START_ADDR 0x00080000
+#define SEQUENCE_7_SIZE 0x00000d10
+
+#define SEQUENCE_8_START_ADDR 0x00081800
+#define SEQUENCE_8_SIZE 0x00000d10
+
+#define SEQUENCE_9_START_ADDR 0x00083000
+#define SEQUENCE_9_SIZE 0x00000d10
+
+#define CMT_LUT_7_START_ADDR 0x0008e000
+#define CMT_LUT_7_SIZE 0x00000600
+
+#define CMT_LUT_8_START_ADDR 0x0008e800
+#define CMT_LUT_8_SIZE 0x00000600
+
+#define CMT_LUT_9_START_ADDR 0x0008f000
+#define CMT_LUT_9_SIZE 0x00000600
+
+#define SPLASH_1_START_ADDR 0x0009a000
+#define SPLASH_1_SIZE 0x00032280
+
+#define SPLASH_2_START_ADDR 0x000cd000
+#define SPLASH_2_SIZE 0x00032280
+
+#define SPLASH_3_START_ADDR 0x00100000
+#define SPLASH_3_SIZE 0x00032280
+
+#define OPT_SPLASH_0_START_ADDR 0x00134000
+#define OPT_SPLASH_0_SIZE 0x000cb100
+
+#endif
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 4e888ac..80c3f6a 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -35,26 +35,12 @@
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
+#include <video/mipi_display.h>
/* DSI Virtual channel. Hardcoded for now. */
#define TCH 0
#define DCS_READ_NUM_ERRORS 0x05
-#define DCS_READ_POWER_MODE 0x0a
-#define DCS_READ_MADCTL 0x0b
-#define DCS_READ_PIXEL_FORMAT 0x0c
-#define DCS_RDDSDR 0x0f
-#define DCS_SLEEP_IN 0x10
-#define DCS_SLEEP_OUT 0x11
-#define DCS_DISPLAY_OFF 0x28
-#define DCS_DISPLAY_ON 0x29
-#define DCS_COLUMN_ADDR 0x2a
-#define DCS_PAGE_ADDR 0x2b
-#define DCS_MEMORY_WRITE 0x2c
-#define DCS_TEAR_OFF 0x34
-#define DCS_TEAR_ON 0x35
-#define DCS_MEM_ACC_CTRL 0x36
-#define DCS_PIXEL_FORMAT 0x3a
#define DCS_BRIGHTNESS 0x51
#define DCS_CTRL_DISPLAY 0x53
#define DCS_WRITE_CABC 0x55
@@ -222,8 +208,6 @@
struct delayed_work te_timeout_work;
- bool use_dsi_bl;
-
bool cabc_broken;
unsigned cabc_mode;
@@ -302,7 +286,7 @@
hw_guard_wait(td);
- cmd = DCS_SLEEP_IN;
+ cmd = MIPI_DCS_ENTER_SLEEP_MODE;
r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, &cmd, 1);
if (r)
return r;
@@ -321,7 +305,7 @@
hw_guard_wait(td);
- r = taal_dcs_write_0(td, DCS_SLEEP_OUT);
+ r = taal_dcs_write_0(td, MIPI_DCS_EXIT_SLEEP_MODE);
if (r)
return r;
@@ -356,7 +340,7 @@
u8 mode;
int b5, b6, b7;
- r = taal_dcs_read_1(td, DCS_READ_MADCTL, &mode);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_ADDRESS_MODE, &mode);
if (r)
return r;
@@ -390,7 +374,7 @@
mode &= ~((1<<7) | (1<<6) | (1<<5));
mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
- return taal_dcs_write_1(td, DCS_MEM_ACC_CTRL, mode);
+ return taal_dcs_write_1(td, MIPI_DCS_SET_ADDRESS_MODE, mode);
}
static int taal_set_update_window(struct taal_data *td,
@@ -403,7 +387,7 @@
u16 y2 = y + h - 1;
u8 buf[5];
- buf[0] = DCS_COLUMN_ADDR;
+ buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
buf[1] = (x1 >> 8) & 0xff;
buf[2] = (x1 >> 0) & 0xff;
buf[3] = (x2 >> 8) & 0xff;
@@ -413,7 +397,7 @@
if (r)
return r;
- buf[0] = DCS_PAGE_ADDR;
+ buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
buf[1] = (y1 >> 8) & 0xff;
buf[2] = (y1 >> 0) & 0xff;
buf[3] = (y2 >> 8) & 0xff;
@@ -555,7 +539,6 @@
{
struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
int level;
@@ -569,23 +552,16 @@
mutex_lock(&td->lock);
- if (td->use_dsi_bl) {
- if (td->enabled) {
- dsi_bus_lock(dssdev);
+ if (td->enabled) {
+ dsi_bus_lock(dssdev);
- r = taal_wake_up(dssdev);
- if (!r)
- r = taal_dcs_write_1(td, DCS_BRIGHTNESS, level);
+ r = taal_wake_up(dssdev);
+ if (!r)
+ r = taal_dcs_write_1(td, DCS_BRIGHTNESS, level);
- dsi_bus_unlock(dssdev);
- } else {
- r = 0;
- }
+ dsi_bus_unlock(dssdev);
} else {
- if (!panel_data->set_backlight)
- r = -EINVAL;
- else
- r = panel_data->set_backlight(dssdev, level);
+ r = 0;
}
mutex_unlock(&td->lock);
@@ -964,7 +940,7 @@
{
struct backlight_properties props;
struct taal_data *td;
- struct backlight_device *bldev;
+ struct backlight_device *bldev = NULL;
struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
struct panel_config *panel_config = NULL;
int r, i;
@@ -990,7 +966,7 @@
dssdev->panel.config = OMAP_DSS_LCD_TFT;
dssdev->panel.timings = panel_config->timings;
- dssdev->ctrl.pixel_size = 24;
+ dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
td = kzalloc(sizeof(*td), GFP_KERNEL);
if (!td) {
@@ -1025,35 +1001,26 @@
taal_hw_reset(dssdev);
- /* if no platform set_backlight() defined, presume DSI backlight
- * control */
- memset(&props, 0, sizeof(struct backlight_properties));
- if (!panel_data->set_backlight)
- td->use_dsi_bl = true;
-
- if (td->use_dsi_bl)
+ if (panel_data->use_dsi_backlight) {
+ memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 255;
- else
- props.max_brightness = 127;
- props.type = BACKLIGHT_RAW;
- bldev = backlight_device_register(dev_name(&dssdev->dev), &dssdev->dev,
- dssdev, &taal_bl_ops, &props);
- if (IS_ERR(bldev)) {
- r = PTR_ERR(bldev);
- goto err_bl;
- }
+ props.type = BACKLIGHT_RAW;
+ bldev = backlight_device_register(dev_name(&dssdev->dev),
+ &dssdev->dev, dssdev, &taal_bl_ops, &props);
+ if (IS_ERR(bldev)) {
+ r = PTR_ERR(bldev);
+ goto err_bl;
+ }
- td->bldev = bldev;
+ td->bldev = bldev;
- bldev->props.fb_blank = FB_BLANK_UNBLANK;
- bldev->props.power = FB_BLANK_UNBLANK;
- if (td->use_dsi_bl)
+ bldev->props.fb_blank = FB_BLANK_UNBLANK;
+ bldev->props.power = FB_BLANK_UNBLANK;
bldev->props.brightness = 255;
- else
- bldev->props.brightness = 127;
- taal_bl_update_status(bldev);
+ taal_bl_update_status(bldev);
+ }
if (panel_data->use_ext_te) {
int gpio = panel_data->ext_te_gpio;
@@ -1067,7 +1034,7 @@
gpio_direction_input(gpio);
r = request_irq(gpio_to_irq(gpio), taal_te_isr,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
+ IRQF_TRIGGER_RISING,
"taal vsync", dssdev);
if (r) {
@@ -1111,7 +1078,8 @@
if (panel_data->use_ext_te)
gpio_free(panel_data->ext_te_gpio);
err_gpio:
- backlight_device_unregister(bldev);
+ if (bldev != NULL)
+ backlight_device_unregister(bldev);
err_bl:
destroy_workqueue(td->workqueue);
err_wq:
@@ -1140,9 +1108,11 @@
}
bldev = td->bldev;
- bldev->props.power = FB_BLANK_POWERDOWN;
- taal_bl_update_status(bldev);
- backlight_device_unregister(bldev);
+ if (bldev != NULL) {
+ bldev->props.power = FB_BLANK_POWERDOWN;
+ taal_bl_update_status(bldev);
+ backlight_device_unregister(bldev);
+ }
taal_cancel_ulps_work(dssdev);
taal_cancel_esd_work(dssdev);
@@ -1195,7 +1165,8 @@
if (r)
goto err;
- r = taal_dcs_write_1(td, DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_PIXEL_FORMAT,
+ MIPI_DCS_PIXEL_FMT_24BIT);
if (r)
goto err;
@@ -1209,7 +1180,7 @@
goto err;
}
- r = taal_dcs_write_0(td, DCS_DISPLAY_ON);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_ON);
if (r)
goto err;
@@ -1246,7 +1217,7 @@
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
int r;
- r = taal_dcs_write_0(td, DCS_DISPLAY_OFF);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_OFF);
if (!r)
r = taal_sleep_in(td);
@@ -1529,9 +1500,9 @@
int r;
if (enable)
- r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
else
- r = taal_dcs_write_0(td, DCS_TEAR_OFF);
+ r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
if (!panel_data->use_ext_te)
omapdss_dsi_enable_te(dssdev, enable);
@@ -1851,7 +1822,7 @@
goto err;
}
- r = taal_dcs_read_1(td, DCS_RDDSDR, &state1);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state1);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
@@ -1864,7 +1835,7 @@
goto err;
}
- r = taal_dcs_read_1(td, DCS_RDDSDR, &state2);
+ r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state2);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
@@ -1880,7 +1851,7 @@
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
if (td->te_enabled && panel_data->use_ext_te) {
- r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
+ r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
if (r)
goto err;
}
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 0d12524..7be7c06 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -1,5 +1,5 @@
menuconfig OMAP2_DSS
- tristate "OMAP2+ Display Subsystem support (EXPERIMENTAL)"
+ tristate "OMAP2+ Display Subsystem support"
depends on ARCH_OMAP2PLUS
help
OMAP2+ Display Subsystem support.
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 10d9d3b..bd34ac5 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -6,4 +6,4 @@
omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi.o \
- hdmi_omap4_panel.o
+ hdmi_panel.o ti_hdmi_4xxx_ip.o
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 76821fe..86ec12e1 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -145,6 +145,10 @@
debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir,
&venc_dump_regs, &dss_debug_fops);
#endif
+#ifdef CONFIG_OMAP4_DSS_HDMI
+ debugfs_create_file("hdmi", S_IRUGO, dss_debugfs_dir,
+ &hdmi_dump_regs, &dss_debug_fops);
+#endif
return 0;
}
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 0f3961a..6892cfd 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -106,7 +106,7 @@
int irq;
struct clk *dss_clk;
- u32 fifo_size[3];
+ u32 fifo_size[MAX_DSS_OVERLAYS];
spinlock_t irq_lock;
u32 irq_error_mask;
@@ -171,173 +171,99 @@
static void dispc_save_context(void)
{
- int i;
+ int i, j;
DSSDBG("dispc_save_context\n");
SR(IRQENABLE);
SR(CONTROL);
SR(CONFIG);
- SR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD));
- SR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_DIGIT));
- SR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD));
- SR(TRANS_COLOR(OMAP_DSS_CHANNEL_DIGIT));
SR(LINE_NUMBER);
- SR(TIMING_H(OMAP_DSS_CHANNEL_LCD));
- SR(TIMING_V(OMAP_DSS_CHANNEL_LCD));
- SR(POL_FREQ(OMAP_DSS_CHANNEL_LCD));
- SR(DIVISORo(OMAP_DSS_CHANNEL_LCD));
- if (dss_has_feature(FEAT_GLOBAL_ALPHA))
+ if (dss_has_feature(FEAT_ALPHA_FIXED_ZORDER) ||
+ dss_has_feature(FEAT_ALPHA_FREE_ZORDER))
SR(GLOBAL_ALPHA);
- SR(SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT));
- SR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD));
if (dss_has_feature(FEAT_MGR_LCD2)) {
SR(CONTROL2);
- SR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD2));
- SR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD2));
- SR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD2));
- SR(TIMING_H(OMAP_DSS_CHANNEL_LCD2));
- SR(TIMING_V(OMAP_DSS_CHANNEL_LCD2));
- SR(POL_FREQ(OMAP_DSS_CHANNEL_LCD2));
- SR(DIVISORo(OMAP_DSS_CHANNEL_LCD2));
SR(CONFIG2);
}
- SR(OVL_BA0(OMAP_DSS_GFX));
- SR(OVL_BA1(OMAP_DSS_GFX));
- SR(OVL_POSITION(OMAP_DSS_GFX));
- SR(OVL_SIZE(OMAP_DSS_GFX));
- SR(OVL_ATTRIBUTES(OMAP_DSS_GFX));
- SR(OVL_FIFO_THRESHOLD(OMAP_DSS_GFX));
- SR(OVL_ROW_INC(OMAP_DSS_GFX));
- SR(OVL_PIXEL_INC(OMAP_DSS_GFX));
- SR(OVL_WINDOW_SKIP(OMAP_DSS_GFX));
- SR(OVL_TABLE_BA(OMAP_DSS_GFX));
+ for (i = 0; i < dss_feat_get_num_mgrs(); i++) {
+ SR(DEFAULT_COLOR(i));
+ SR(TRANS_COLOR(i));
+ SR(SIZE_MGR(i));
+ if (i == OMAP_DSS_CHANNEL_DIGIT)
+ continue;
+ SR(TIMING_H(i));
+ SR(TIMING_V(i));
+ SR(POL_FREQ(i));
+ SR(DIVISORo(i));
- SR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD));
- SR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD));
- SR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD));
+ SR(DATA_CYCLE1(i));
+ SR(DATA_CYCLE2(i));
+ SR(DATA_CYCLE3(i));
- if (dss_has_feature(FEAT_CPR)) {
- SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
- SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
- SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
- }
- if (dss_has_feature(FEAT_MGR_LCD2)) {
if (dss_has_feature(FEAT_CPR)) {
- SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
- SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
- SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
+ SR(CPR_COEF_R(i));
+ SR(CPR_COEF_G(i));
+ SR(CPR_COEF_B(i));
+ }
+ }
+
+ for (i = 0; i < dss_feat_get_num_ovls(); i++) {
+ SR(OVL_BA0(i));
+ SR(OVL_BA1(i));
+ SR(OVL_POSITION(i));
+ SR(OVL_SIZE(i));
+ SR(OVL_ATTRIBUTES(i));
+ SR(OVL_FIFO_THRESHOLD(i));
+ SR(OVL_ROW_INC(i));
+ SR(OVL_PIXEL_INC(i));
+ if (dss_has_feature(FEAT_PRELOAD))
+ SR(OVL_PRELOAD(i));
+ if (i == OMAP_DSS_GFX) {
+ SR(OVL_WINDOW_SKIP(i));
+ SR(OVL_TABLE_BA(i));
+ continue;
+ }
+ SR(OVL_FIR(i));
+ SR(OVL_PICTURE_SIZE(i));
+ SR(OVL_ACCU0(i));
+ SR(OVL_ACCU1(i));
+
+ for (j = 0; j < 8; j++)
+ SR(OVL_FIR_COEF_H(i, j));
+
+ for (j = 0; j < 8; j++)
+ SR(OVL_FIR_COEF_HV(i, j));
+
+ for (j = 0; j < 5; j++)
+ SR(OVL_CONV_COEF(i, j));
+
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ for (j = 0; j < 8; j++)
+ SR(OVL_FIR_COEF_V(i, j));
}
- SR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2));
- SR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2));
- SR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2));
+ if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
+ SR(OVL_BA0_UV(i));
+ SR(OVL_BA1_UV(i));
+ SR(OVL_FIR2(i));
+ SR(OVL_ACCU2_0(i));
+ SR(OVL_ACCU2_1(i));
+
+ for (j = 0; j < 8; j++)
+ SR(OVL_FIR_COEF_H2(i, j));
+
+ for (j = 0; j < 8; j++)
+ SR(OVL_FIR_COEF_HV2(i, j));
+
+ for (j = 0; j < 8; j++)
+ SR(OVL_FIR_COEF_V2(i, j));
+ }
+ if (dss_has_feature(FEAT_ATTR2))
+ SR(OVL_ATTRIBUTES2(i));
}
- if (dss_has_feature(FEAT_PRELOAD))
- SR(OVL_PRELOAD(OMAP_DSS_GFX));
-
- /* VID1 */
- SR(OVL_BA0(OMAP_DSS_VIDEO1));
- SR(OVL_BA1(OMAP_DSS_VIDEO1));
- SR(OVL_POSITION(OMAP_DSS_VIDEO1));
- SR(OVL_SIZE(OMAP_DSS_VIDEO1));
- SR(OVL_ATTRIBUTES(OMAP_DSS_VIDEO1));
- SR(OVL_FIFO_THRESHOLD(OMAP_DSS_VIDEO1));
- SR(OVL_ROW_INC(OMAP_DSS_VIDEO1));
- SR(OVL_PIXEL_INC(OMAP_DSS_VIDEO1));
- SR(OVL_FIR(OMAP_DSS_VIDEO1));
- SR(OVL_PICTURE_SIZE(OMAP_DSS_VIDEO1));
- SR(OVL_ACCU0(OMAP_DSS_VIDEO1));
- SR(OVL_ACCU1(OMAP_DSS_VIDEO1));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, i));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, i));
-
- for (i = 0; i < 5; i++)
- SR(OVL_CONV_COEF(OMAP_DSS_VIDEO1, i));
-
- if (dss_has_feature(FEAT_FIR_COEF_V)) {
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, i));
- }
-
- if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
- SR(OVL_BA0_UV(OMAP_DSS_VIDEO1));
- SR(OVL_BA1_UV(OMAP_DSS_VIDEO1));
- SR(OVL_FIR2(OMAP_DSS_VIDEO1));
- SR(OVL_ACCU2_0(OMAP_DSS_VIDEO1));
- SR(OVL_ACCU2_1(OMAP_DSS_VIDEO1));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, i));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, i));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, i));
- }
- if (dss_has_feature(FEAT_ATTR2))
- SR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO1));
-
- if (dss_has_feature(FEAT_PRELOAD))
- SR(OVL_PRELOAD(OMAP_DSS_VIDEO1));
-
- /* VID2 */
- SR(OVL_BA0(OMAP_DSS_VIDEO2));
- SR(OVL_BA1(OMAP_DSS_VIDEO2));
- SR(OVL_POSITION(OMAP_DSS_VIDEO2));
- SR(OVL_SIZE(OMAP_DSS_VIDEO2));
- SR(OVL_ATTRIBUTES(OMAP_DSS_VIDEO2));
- SR(OVL_FIFO_THRESHOLD(OMAP_DSS_VIDEO2));
- SR(OVL_ROW_INC(OMAP_DSS_VIDEO2));
- SR(OVL_PIXEL_INC(OMAP_DSS_VIDEO2));
- SR(OVL_FIR(OMAP_DSS_VIDEO2));
- SR(OVL_PICTURE_SIZE(OMAP_DSS_VIDEO2));
- SR(OVL_ACCU0(OMAP_DSS_VIDEO2));
- SR(OVL_ACCU1(OMAP_DSS_VIDEO2));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 5; i++)
- SR(OVL_CONV_COEF(OMAP_DSS_VIDEO2, i));
-
- if (dss_has_feature(FEAT_FIR_COEF_V)) {
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, i));
- }
-
- if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
- SR(OVL_BA0_UV(OMAP_DSS_VIDEO2));
- SR(OVL_BA1_UV(OMAP_DSS_VIDEO2));
- SR(OVL_FIR2(OMAP_DSS_VIDEO2));
- SR(OVL_ACCU2_0(OMAP_DSS_VIDEO2));
- SR(OVL_ACCU2_1(OMAP_DSS_VIDEO2));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, i));
- }
- if (dss_has_feature(FEAT_ATTR2))
- SR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO2));
-
- if (dss_has_feature(FEAT_PRELOAD))
- SR(OVL_PRELOAD(OMAP_DSS_VIDEO2));
-
if (dss_has_feature(FEAT_CORE_CLK_DIV))
SR(DIVISOR);
@@ -349,7 +275,7 @@
static void dispc_restore_context(void)
{
- int i, ctx;
+ int i, j, ctx;
DSSDBG("dispc_restore_context\n");
@@ -367,166 +293,90 @@
/*RR(IRQENABLE);*/
/*RR(CONTROL);*/
RR(CONFIG);
- RR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD));
- RR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_DIGIT));
- RR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD));
- RR(TRANS_COLOR(OMAP_DSS_CHANNEL_DIGIT));
RR(LINE_NUMBER);
- RR(TIMING_H(OMAP_DSS_CHANNEL_LCD));
- RR(TIMING_V(OMAP_DSS_CHANNEL_LCD));
- RR(POL_FREQ(OMAP_DSS_CHANNEL_LCD));
- RR(DIVISORo(OMAP_DSS_CHANNEL_LCD));
- if (dss_has_feature(FEAT_GLOBAL_ALPHA))
+ if (dss_has_feature(FEAT_ALPHA_FIXED_ZORDER) ||
+ dss_has_feature(FEAT_ALPHA_FREE_ZORDER))
RR(GLOBAL_ALPHA);
- RR(SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT));
- RR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD));
- if (dss_has_feature(FEAT_MGR_LCD2)) {
- RR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD2));
- RR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD2));
- RR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD2));
- RR(TIMING_H(OMAP_DSS_CHANNEL_LCD2));
- RR(TIMING_V(OMAP_DSS_CHANNEL_LCD2));
- RR(POL_FREQ(OMAP_DSS_CHANNEL_LCD2));
- RR(DIVISORo(OMAP_DSS_CHANNEL_LCD2));
+ if (dss_has_feature(FEAT_MGR_LCD2))
RR(CONFIG2);
- }
- RR(OVL_BA0(OMAP_DSS_GFX));
- RR(OVL_BA1(OMAP_DSS_GFX));
- RR(OVL_POSITION(OMAP_DSS_GFX));
- RR(OVL_SIZE(OMAP_DSS_GFX));
- RR(OVL_ATTRIBUTES(OMAP_DSS_GFX));
- RR(OVL_FIFO_THRESHOLD(OMAP_DSS_GFX));
- RR(OVL_ROW_INC(OMAP_DSS_GFX));
- RR(OVL_PIXEL_INC(OMAP_DSS_GFX));
- RR(OVL_WINDOW_SKIP(OMAP_DSS_GFX));
- RR(OVL_TABLE_BA(OMAP_DSS_GFX));
+ for (i = 0; i < dss_feat_get_num_mgrs(); i++) {
+ RR(DEFAULT_COLOR(i));
+ RR(TRANS_COLOR(i));
+ RR(SIZE_MGR(i));
+ if (i == OMAP_DSS_CHANNEL_DIGIT)
+ continue;
+ RR(TIMING_H(i));
+ RR(TIMING_V(i));
+ RR(POL_FREQ(i));
+ RR(DIVISORo(i));
-
- RR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD));
- RR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD));
- RR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD));
-
- if (dss_has_feature(FEAT_CPR)) {
- RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
- RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
- RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
- }
- if (dss_has_feature(FEAT_MGR_LCD2)) {
- RR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2));
- RR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2));
- RR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2));
+ RR(DATA_CYCLE1(i));
+ RR(DATA_CYCLE2(i));
+ RR(DATA_CYCLE3(i));
if (dss_has_feature(FEAT_CPR)) {
- RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
- RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
- RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
+ RR(CPR_COEF_R(i));
+ RR(CPR_COEF_G(i));
+ RR(CPR_COEF_B(i));
}
}
- if (dss_has_feature(FEAT_PRELOAD))
- RR(OVL_PRELOAD(OMAP_DSS_GFX));
+ for (i = 0; i < dss_feat_get_num_ovls(); i++) {
+ RR(OVL_BA0(i));
+ RR(OVL_BA1(i));
+ RR(OVL_POSITION(i));
+ RR(OVL_SIZE(i));
+ RR(OVL_ATTRIBUTES(i));
+ RR(OVL_FIFO_THRESHOLD(i));
+ RR(OVL_ROW_INC(i));
+ RR(OVL_PIXEL_INC(i));
+ if (dss_has_feature(FEAT_PRELOAD))
+ RR(OVL_PRELOAD(i));
+ if (i == OMAP_DSS_GFX) {
+ RR(OVL_WINDOW_SKIP(i));
+ RR(OVL_TABLE_BA(i));
+ continue;
+ }
+ RR(OVL_FIR(i));
+ RR(OVL_PICTURE_SIZE(i));
+ RR(OVL_ACCU0(i));
+ RR(OVL_ACCU1(i));
- /* VID1 */
- RR(OVL_BA0(OMAP_DSS_VIDEO1));
- RR(OVL_BA1(OMAP_DSS_VIDEO1));
- RR(OVL_POSITION(OMAP_DSS_VIDEO1));
- RR(OVL_SIZE(OMAP_DSS_VIDEO1));
- RR(OVL_ATTRIBUTES(OMAP_DSS_VIDEO1));
- RR(OVL_FIFO_THRESHOLD(OMAP_DSS_VIDEO1));
- RR(OVL_ROW_INC(OMAP_DSS_VIDEO1));
- RR(OVL_PIXEL_INC(OMAP_DSS_VIDEO1));
- RR(OVL_FIR(OMAP_DSS_VIDEO1));
- RR(OVL_PICTURE_SIZE(OMAP_DSS_VIDEO1));
- RR(OVL_ACCU0(OMAP_DSS_VIDEO1));
- RR(OVL_ACCU1(OMAP_DSS_VIDEO1));
+ for (j = 0; j < 8; j++)
+ RR(OVL_FIR_COEF_H(i, j));
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, i));
+ for (j = 0; j < 8; j++)
+ RR(OVL_FIR_COEF_HV(i, j));
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, i));
+ for (j = 0; j < 5; j++)
+ RR(OVL_CONV_COEF(i, j));
- for (i = 0; i < 5; i++)
- RR(OVL_CONV_COEF(OMAP_DSS_VIDEO1, i));
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ for (j = 0; j < 8; j++)
+ RR(OVL_FIR_COEF_V(i, j));
+ }
- if (dss_has_feature(FEAT_FIR_COEF_V)) {
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, i));
+ if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
+ RR(OVL_BA0_UV(i));
+ RR(OVL_BA1_UV(i));
+ RR(OVL_FIR2(i));
+ RR(OVL_ACCU2_0(i));
+ RR(OVL_ACCU2_1(i));
+
+ for (j = 0; j < 8; j++)
+ RR(OVL_FIR_COEF_H2(i, j));
+
+ for (j = 0; j < 8; j++)
+ RR(OVL_FIR_COEF_HV2(i, j));
+
+ for (j = 0; j < 8; j++)
+ RR(OVL_FIR_COEF_V2(i, j));
+ }
+ if (dss_has_feature(FEAT_ATTR2))
+ RR(OVL_ATTRIBUTES2(i));
}
- if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
- RR(OVL_BA0_UV(OMAP_DSS_VIDEO1));
- RR(OVL_BA1_UV(OMAP_DSS_VIDEO1));
- RR(OVL_FIR2(OMAP_DSS_VIDEO1));
- RR(OVL_ACCU2_0(OMAP_DSS_VIDEO1));
- RR(OVL_ACCU2_1(OMAP_DSS_VIDEO1));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, i));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, i));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, i));
- }
- if (dss_has_feature(FEAT_ATTR2))
- RR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO1));
-
- if (dss_has_feature(FEAT_PRELOAD))
- RR(OVL_PRELOAD(OMAP_DSS_VIDEO1));
-
- /* VID2 */
- RR(OVL_BA0(OMAP_DSS_VIDEO2));
- RR(OVL_BA1(OMAP_DSS_VIDEO2));
- RR(OVL_POSITION(OMAP_DSS_VIDEO2));
- RR(OVL_SIZE(OMAP_DSS_VIDEO2));
- RR(OVL_ATTRIBUTES(OMAP_DSS_VIDEO2));
- RR(OVL_FIFO_THRESHOLD(OMAP_DSS_VIDEO2));
- RR(OVL_ROW_INC(OMAP_DSS_VIDEO2));
- RR(OVL_PIXEL_INC(OMAP_DSS_VIDEO2));
- RR(OVL_FIR(OMAP_DSS_VIDEO2));
- RR(OVL_PICTURE_SIZE(OMAP_DSS_VIDEO2));
- RR(OVL_ACCU0(OMAP_DSS_VIDEO2));
- RR(OVL_ACCU1(OMAP_DSS_VIDEO2));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 5; i++)
- RR(OVL_CONV_COEF(OMAP_DSS_VIDEO2, i));
-
- if (dss_has_feature(FEAT_FIR_COEF_V)) {
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, i));
- }
-
- if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
- RR(OVL_BA0_UV(OMAP_DSS_VIDEO2));
- RR(OVL_BA1_UV(OMAP_DSS_VIDEO2));
- RR(OVL_FIR2(OMAP_DSS_VIDEO2));
- RR(OVL_ACCU2_0(OMAP_DSS_VIDEO2));
- RR(OVL_ACCU2_1(OMAP_DSS_VIDEO2));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, i));
-
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, i));
- }
- if (dss_has_feature(FEAT_ATTR2))
- RR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO2));
-
- if (dss_has_feature(FEAT_PRELOAD))
- RR(OVL_PRELOAD(OMAP_DSS_VIDEO2));
-
if (dss_has_feature(FEAT_CORE_CLK_DIV))
RR(DIVISOR);
@@ -570,13 +420,28 @@
WARN_ON(r < 0);
}
+static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
+{
+ if (channel == OMAP_DSS_CHANNEL_LCD ||
+ channel == OMAP_DSS_CHANNEL_LCD2)
+ return true;
+ else
+ return false;
+}
-bool dispc_go_busy(enum omap_channel channel)
+static struct omap_dss_device *dispc_mgr_get_device(enum omap_channel channel)
+{
+ struct omap_overlay_manager *mgr =
+ omap_dss_get_overlay_manager(channel);
+
+ return mgr ? mgr->device : NULL;
+}
+
+bool dispc_mgr_go_busy(enum omap_channel channel)
{
int bit;
- if (channel == OMAP_DSS_CHANNEL_LCD ||
- channel == OMAP_DSS_CHANNEL_LCD2)
+ if (dispc_mgr_is_lcd(channel))
bit = 5; /* GOLCD */
else
bit = 6; /* GODIGIT */
@@ -587,13 +452,12 @@
return REG_GET(DISPC_CONTROL, bit, bit) == 1;
}
-void dispc_go(enum omap_channel channel)
+void dispc_mgr_go(enum omap_channel channel)
{
int bit;
bool enable_bit, go_bit;
- if (channel == OMAP_DSS_CHANNEL_LCD ||
- channel == OMAP_DSS_CHANNEL_LCD2)
+ if (dispc_mgr_is_lcd(channel))
bit = 0; /* LCDENABLE */
else
bit = 1; /* DIGITALENABLE */
@@ -607,8 +471,7 @@
if (!enable_bit)
return;
- if (channel == OMAP_DSS_CHANNEL_LCD ||
- channel == OMAP_DSS_CHANNEL_LCD2)
+ if (dispc_mgr_is_lcd(channel))
bit = 5; /* GOLCD */
else
bit = 6; /* GODIGIT */
@@ -632,43 +495,44 @@
REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit);
}
-static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value)
+static void dispc_ovl_write_firh_reg(enum omap_plane plane, int reg, u32 value)
{
dispc_write_reg(DISPC_OVL_FIR_COEF_H(plane, reg), value);
}
-static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value)
+static void dispc_ovl_write_firhv_reg(enum omap_plane plane, int reg, u32 value)
{
dispc_write_reg(DISPC_OVL_FIR_COEF_HV(plane, reg), value);
}
-static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value)
+static void dispc_ovl_write_firv_reg(enum omap_plane plane, int reg, u32 value)
{
dispc_write_reg(DISPC_OVL_FIR_COEF_V(plane, reg), value);
}
-static void _dispc_write_firh2_reg(enum omap_plane plane, int reg, u32 value)
+static void dispc_ovl_write_firh2_reg(enum omap_plane plane, int reg, u32 value)
{
BUG_ON(plane == OMAP_DSS_GFX);
dispc_write_reg(DISPC_OVL_FIR_COEF_H2(plane, reg), value);
}
-static void _dispc_write_firhv2_reg(enum omap_plane plane, int reg, u32 value)
+static void dispc_ovl_write_firhv2_reg(enum omap_plane plane, int reg,
+ u32 value)
{
BUG_ON(plane == OMAP_DSS_GFX);
dispc_write_reg(DISPC_OVL_FIR_COEF_HV2(plane, reg), value);
}
-static void _dispc_write_firv2_reg(enum omap_plane plane, int reg, u32 value)
+static void dispc_ovl_write_firv2_reg(enum omap_plane plane, int reg, u32 value)
{
BUG_ON(plane == OMAP_DSS_GFX);
dispc_write_reg(DISPC_OVL_FIR_COEF_V2(plane, reg), value);
}
-static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup,
+static void dispc_ovl_set_scale_coef(enum omap_plane plane, int hscaleup,
int vscaleup, int five_taps,
enum omap_color_component color_comp)
{
@@ -769,11 +633,11 @@
| FLD_VAL(v_coef[i].vc2, 31, 24);
if (color_comp == DISPC_COLOR_COMPONENT_RGB_Y) {
- _dispc_write_firh_reg(plane, i, h);
- _dispc_write_firhv_reg(plane, i, hv);
+ dispc_ovl_write_firh_reg(plane, i, h);
+ dispc_ovl_write_firhv_reg(plane, i, hv);
} else {
- _dispc_write_firh2_reg(plane, i, h);
- _dispc_write_firhv2_reg(plane, i, hv);
+ dispc_ovl_write_firh2_reg(plane, i, h);
+ dispc_ovl_write_firhv2_reg(plane, i, hv);
}
}
@@ -784,15 +648,16 @@
v = FLD_VAL(v_coef[i].vc00, 7, 0)
| FLD_VAL(v_coef[i].vc22, 15, 8);
if (color_comp == DISPC_COLOR_COMPONENT_RGB_Y)
- _dispc_write_firv_reg(plane, i, v);
+ dispc_ovl_write_firv_reg(plane, i, v);
else
- _dispc_write_firv2_reg(plane, i, v);
+ dispc_ovl_write_firv2_reg(plane, i, v);
}
}
}
static void _dispc_setup_color_conv_coef(void)
{
+ int i;
const struct color_conv_coef {
int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
int full_range;
@@ -806,65 +671,54 @@
ct = &ctbl_bt601_5;
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 0),
- CVAL(ct->rcr, ct->ry));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 1),
- CVAL(ct->gy, ct->rcb));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 2),
- CVAL(ct->gcb, ct->gcr));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 3),
- CVAL(ct->bcr, ct->by));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 4),
- CVAL(0, ct->bcb));
+ for (i = 1; i < dss_feat_get_num_ovls(); i++) {
+ dispc_write_reg(DISPC_OVL_CONV_COEF(i, 0),
+ CVAL(ct->rcr, ct->ry));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(i, 1),
+ CVAL(ct->gy, ct->rcb));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(i, 2),
+ CVAL(ct->gcb, ct->gcr));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(i, 3),
+ CVAL(ct->bcr, ct->by));
+ dispc_write_reg(DISPC_OVL_CONV_COEF(i, 4),
+ CVAL(0, ct->bcb));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 0),
- CVAL(ct->rcr, ct->ry));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 1),
- CVAL(ct->gy, ct->rcb));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 2),
- CVAL(ct->gcb, ct->gcr));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 3),
- CVAL(ct->bcr, ct->by));
- dispc_write_reg(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 4),
- CVAL(0, ct->bcb));
+ REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(i), ct->full_range,
+ 11, 11);
+ }
#undef CVAL
-
- REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(OMAP_DSS_VIDEO1),
- ct->full_range, 11, 11);
- REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(OMAP_DSS_VIDEO2),
- ct->full_range, 11, 11);
}
-static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr)
+static void dispc_ovl_set_ba0(enum omap_plane plane, u32 paddr)
{
dispc_write_reg(DISPC_OVL_BA0(plane), paddr);
}
-static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr)
+static void dispc_ovl_set_ba1(enum omap_plane plane, u32 paddr)
{
dispc_write_reg(DISPC_OVL_BA1(plane), paddr);
}
-static void _dispc_set_plane_ba0_uv(enum omap_plane plane, u32 paddr)
+static void dispc_ovl_set_ba0_uv(enum omap_plane plane, u32 paddr)
{
dispc_write_reg(DISPC_OVL_BA0_UV(plane), paddr);
}
-static void _dispc_set_plane_ba1_uv(enum omap_plane plane, u32 paddr)
+static void dispc_ovl_set_ba1_uv(enum omap_plane plane, u32 paddr)
{
dispc_write_reg(DISPC_OVL_BA1_UV(plane), paddr);
}
-static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y)
+static void dispc_ovl_set_pos(enum omap_plane plane, int x, int y)
{
u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0);
dispc_write_reg(DISPC_OVL_POSITION(plane), val);
}
-static void _dispc_set_pic_size(enum omap_plane plane, int width, int height)
+static void dispc_ovl_set_pic_size(enum omap_plane plane, int width, int height)
{
u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
@@ -874,7 +728,7 @@
dispc_write_reg(DISPC_OVL_PICTURE_SIZE(plane), val);
}
-static void _dispc_set_vid_size(enum omap_plane plane, int width, int height)
+static void dispc_ovl_set_vid_size(enum omap_plane plane, int width, int height)
{
u32 val;
@@ -885,44 +739,61 @@
dispc_write_reg(DISPC_OVL_SIZE(plane), val);
}
-static void _dispc_set_pre_mult_alpha(enum omap_plane plane, bool enable)
+static void dispc_ovl_set_zorder(enum omap_plane plane, u8 zorder)
{
- if (!dss_has_feature(FEAT_PRE_MULT_ALPHA))
+ struct omap_overlay *ovl = omap_dss_get_overlay(plane);
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
return;
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA_VID1) &&
- plane == OMAP_DSS_VIDEO1)
+ REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), zorder, 27, 26);
+}
+
+static void dispc_ovl_enable_zorder_planes(void)
+{
+ int i;
+
+ if (!dss_has_feature(FEAT_ALPHA_FREE_ZORDER))
+ return;
+
+ for (i = 0; i < dss_feat_get_num_ovls(); i++)
+ REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(i), 1, 25, 25);
+}
+
+static void dispc_ovl_set_pre_mult_alpha(enum omap_plane plane, bool enable)
+{
+ struct omap_overlay *ovl = omap_dss_get_overlay(plane);
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
return;
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 28, 28);
}
-static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha)
+static void dispc_ovl_setup_global_alpha(enum omap_plane plane, u8 global_alpha)
{
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
+ static const unsigned shifts[] = { 0, 8, 16, 24, };
+ int shift;
+ struct omap_overlay *ovl = omap_dss_get_overlay(plane);
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
return;
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA_VID1) &&
- plane == OMAP_DSS_VIDEO1)
- return;
-
- if (plane == OMAP_DSS_GFX)
- REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0);
- else if (plane == OMAP_DSS_VIDEO2)
- REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16);
+ shift = shifts[plane];
+ REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, shift + 7, shift);
}
-static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc)
+static void dispc_ovl_set_pix_inc(enum omap_plane plane, s32 inc)
{
dispc_write_reg(DISPC_OVL_PIXEL_INC(plane), inc);
}
-static void _dispc_set_row_inc(enum omap_plane plane, s32 inc)
+static void dispc_ovl_set_row_inc(enum omap_plane plane, s32 inc)
{
dispc_write_reg(DISPC_OVL_ROW_INC(plane), inc);
}
-static void _dispc_set_color_mode(enum omap_plane plane,
+static void dispc_ovl_set_color_mode(enum omap_plane plane,
enum omap_color_mode color_mode)
{
u32 m = 0;
@@ -1003,7 +874,7 @@
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), m, 4, 1);
}
-void dispc_set_channel_out(enum omap_plane plane,
+static void dispc_ovl_set_channel_out(enum omap_plane plane,
enum omap_channel channel)
{
int shift;
@@ -1016,6 +887,7 @@
break;
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
+ case OMAP_DSS_VIDEO3:
shift = 16;
break;
default:
@@ -1050,24 +922,13 @@
dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val);
}
-static void dispc_set_burst_size(enum omap_plane plane,
+static void dispc_ovl_set_burst_size(enum omap_plane plane,
enum omap_burst_size burst_size)
{
+ static const unsigned shifts[] = { 6, 14, 14, 14, };
int shift;
- switch (plane) {
- case OMAP_DSS_GFX:
- shift = 6;
- break;
- case OMAP_DSS_VIDEO1:
- case OMAP_DSS_VIDEO2:
- shift = 14;
- break;
- default:
- BUG();
- return;
- }
-
+ shift = shifts[plane];
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), burst_size, shift + 1, shift);
}
@@ -1078,10 +939,10 @@
/* Configure burst size always to maximum size */
for (i = 0; i < omap_dss_get_num_overlays(); ++i)
- dispc_set_burst_size(i, burst_size);
+ dispc_ovl_set_burst_size(i, burst_size);
}
-u32 dispc_get_burst_size(enum omap_plane plane)
+u32 dispc_ovl_get_burst_size(enum omap_plane plane)
{
unsigned unit = dss_feat_get_burst_size_unit();
/* burst multiplier is always x8 (see dispc_configure_burst_sizes()) */
@@ -1102,7 +963,7 @@
REG_FLD_MOD(DISPC_CONFIG, enable, 9, 9);
}
-void dispc_enable_cpr(enum omap_channel channel, bool enable)
+void dispc_mgr_enable_cpr(enum omap_channel channel, bool enable)
{
u16 reg;
@@ -1116,12 +977,12 @@
REG_FLD_MOD(reg, enable, 15, 15);
}
-void dispc_set_cpr_coef(enum omap_channel channel,
+void dispc_mgr_set_cpr_coef(enum omap_channel channel,
struct omap_dss_cpr_coefs *coefs)
{
u32 coef_r, coef_g, coef_b;
- if (channel != OMAP_DSS_CHANNEL_LCD && channel != OMAP_DSS_CHANNEL_LCD2)
+ if (!dispc_mgr_is_lcd(channel))
return;
coef_r = FLD_VAL(coefs->rr, 31, 22) | FLD_VAL(coefs->rg, 20, 11) |
@@ -1136,7 +997,7 @@
dispc_write_reg(DISPC_CPR_COEF_B(channel), coef_b);
}
-static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable)
+static void dispc_ovl_set_vid_color_conv(enum omap_plane plane, bool enable)
{
u32 val;
@@ -1147,19 +1008,16 @@
dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val);
}
-void dispc_enable_replication(enum omap_plane plane, bool enable)
+static void dispc_ovl_enable_replication(enum omap_plane plane, bool enable)
{
- int bit;
+ static const unsigned shifts[] = { 5, 10, 10, 10 };
+ int shift;
- if (plane == OMAP_DSS_GFX)
- bit = 5;
- else
- bit = 10;
-
- REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, bit, bit);
+ shift = shifts[plane];
+ REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, shift, shift);
}
-void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height)
+void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width, u16 height)
{
u32 val;
BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
@@ -1186,19 +1044,20 @@
dss_feat_get_reg_field(FEAT_REG_FIFOSIZE, &start, &end);
- for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) {
+ for (plane = 0; plane < dss_feat_get_num_ovls(); ++plane) {
size = REG_GET(DISPC_OVL_FIFO_SIZE_STATUS(plane), start, end);
size *= unit;
dispc.fifo_size[plane] = size;
}
}
-u32 dispc_get_plane_fifo_size(enum omap_plane plane)
+u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
{
return dispc.fifo_size[plane];
}
-void dispc_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high)
+static void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low,
+ u32 high)
{
u8 hi_start, hi_end, lo_start, lo_end;
u32 unit;
@@ -1233,7 +1092,7 @@
REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
}
-static void _dispc_set_fir(enum omap_plane plane,
+static void dispc_ovl_set_fir(enum omap_plane plane,
int hinc, int vinc,
enum omap_color_component color_comp)
{
@@ -1256,7 +1115,7 @@
}
}
-static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu)
+static void dispc_ovl_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu)
{
u32 val;
u8 hor_start, hor_end, vert_start, vert_end;
@@ -1270,7 +1129,7 @@
dispc_write_reg(DISPC_OVL_ACCU0(plane), val);
}
-static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu)
+static void dispc_ovl_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu)
{
u32 val;
u8 hor_start, hor_end, vert_start, vert_end;
@@ -1284,7 +1143,8 @@
dispc_write_reg(DISPC_OVL_ACCU1(plane), val);
}
-static void _dispc_set_vid_accu2_0(enum omap_plane plane, int haccu, int vaccu)
+static void dispc_ovl_set_vid_accu2_0(enum omap_plane plane, int haccu,
+ int vaccu)
{
u32 val;
@@ -1292,7 +1152,8 @@
dispc_write_reg(DISPC_OVL_ACCU2_0(plane), val);
}
-static void _dispc_set_vid_accu2_1(enum omap_plane plane, int haccu, int vaccu)
+static void dispc_ovl_set_vid_accu2_1(enum omap_plane plane, int haccu,
+ int vaccu)
{
u32 val;
@@ -1300,7 +1161,7 @@
dispc_write_reg(DISPC_OVL_ACCU2_1(plane), val);
}
-static void _dispc_set_scale_param(enum omap_plane plane,
+static void dispc_ovl_set_scale_param(enum omap_plane plane,
u16 orig_width, u16 orig_height,
u16 out_width, u16 out_height,
bool five_taps, u8 rotation,
@@ -1312,15 +1173,16 @@
hscaleup = orig_width <= out_width;
vscaleup = orig_height <= out_height;
- _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps, color_comp);
+ dispc_ovl_set_scale_coef(plane, hscaleup, vscaleup, five_taps,
+ color_comp);
fir_hinc = 1024 * orig_width / out_width;
fir_vinc = 1024 * orig_height / out_height;
- _dispc_set_fir(plane, fir_hinc, fir_vinc, color_comp);
+ dispc_ovl_set_fir(plane, fir_hinc, fir_vinc, color_comp);
}
-static void _dispc_set_scaling_common(enum omap_plane plane,
+static void dispc_ovl_set_scaling_common(enum omap_plane plane,
u16 orig_width, u16 orig_height,
u16 out_width, u16 out_height,
bool ilace, bool five_taps,
@@ -1331,7 +1193,7 @@
int accu1 = 0;
u32 l;
- _dispc_set_scale_param(plane, orig_width, orig_height,
+ dispc_ovl_set_scale_param(plane, orig_width, orig_height,
out_width, out_height, five_taps,
rotation, DISPC_COLOR_COMPONENT_RGB_Y);
l = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane));
@@ -1370,11 +1232,11 @@
}
}
- _dispc_set_vid_accu0(plane, 0, accu0);
- _dispc_set_vid_accu1(plane, 0, accu1);
+ dispc_ovl_set_vid_accu0(plane, 0, accu0);
+ dispc_ovl_set_vid_accu1(plane, 0, accu1);
}
-static void _dispc_set_scaling_uv(enum omap_plane plane,
+static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
u16 orig_width, u16 orig_height,
u16 out_width, u16 out_height,
bool ilace, bool five_taps,
@@ -1422,7 +1284,7 @@
if (out_height != orig_height)
scale_y = true;
- _dispc_set_scale_param(plane, orig_width, orig_height,
+ dispc_ovl_set_scale_param(plane, orig_width, orig_height,
out_width, out_height, five_taps,
rotation, DISPC_COLOR_COMPONENT_UV);
@@ -1433,11 +1295,11 @@
/* set V scaling */
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), scale_y ? 1 : 0, 6, 6);
- _dispc_set_vid_accu2_0(plane, 0x80, 0);
- _dispc_set_vid_accu2_1(plane, 0x80, 0);
+ dispc_ovl_set_vid_accu2_0(plane, 0x80, 0);
+ dispc_ovl_set_vid_accu2_1(plane, 0x80, 0);
}
-static void _dispc_set_scaling(enum omap_plane plane,
+static void dispc_ovl_set_scaling(enum omap_plane plane,
u16 orig_width, u16 orig_height,
u16 out_width, u16 out_height,
bool ilace, bool five_taps,
@@ -1446,14 +1308,14 @@
{
BUG_ON(plane == OMAP_DSS_GFX);
- _dispc_set_scaling_common(plane,
+ dispc_ovl_set_scaling_common(plane,
orig_width, orig_height,
out_width, out_height,
ilace, five_taps,
fieldmode, color_mode,
rotation);
- _dispc_set_scaling_uv(plane,
+ dispc_ovl_set_scaling_uv(plane,
orig_width, orig_height,
out_width, out_height,
ilace, five_taps,
@@ -1461,7 +1323,7 @@
rotation);
}
-static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation,
+static void dispc_ovl_set_rotation_attrs(enum omap_plane plane, u8 rotation,
bool mirroring, enum omap_color_mode color_mode)
{
bool row_repeat = false;
@@ -1789,12 +1651,11 @@
enum omap_color_mode color_mode)
{
u32 fclk = 0;
- /* FIXME venc pclk? */
- u64 tmp, pclk = dispc_pclk_rate(channel);
+ u64 tmp, pclk = dispc_mgr_pclk_rate(channel);
if (height > out_height) {
- /* FIXME get real display PPL */
- unsigned int ppl = 800;
+ struct omap_dss_device *dssdev = dispc_mgr_get_device(channel);
+ unsigned int ppl = dssdev->panel.timings.x_res;
tmp = pclk * height * out_width;
do_div(tmp, 2 * out_height * ppl);
@@ -1846,114 +1707,120 @@
else
vf = 1;
- /* FIXME venc pclk? */
- return dispc_pclk_rate(channel) * vf * hf;
+ return dispc_mgr_pclk_rate(channel) * vf * hf;
}
-int dispc_setup_plane(enum omap_plane plane,
- u32 paddr, u16 screen_width,
- u16 pos_x, u16 pos_y,
- u16 width, u16 height,
+static int dispc_ovl_calc_scaling(enum omap_plane plane,
+ enum omap_channel channel, u16 width, u16 height,
u16 out_width, u16 out_height,
- enum omap_color_mode color_mode,
- bool ilace,
- enum omap_dss_rotation_type rotation_type,
- u8 rotation, bool mirror,
- u8 global_alpha, u8 pre_mult_alpha,
- enum omap_channel channel, u32 puv_addr)
+ enum omap_color_mode color_mode, bool *five_taps)
{
- const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
- bool five_taps = 0;
+ struct omap_overlay *ovl = omap_dss_get_overlay(plane);
+ const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
+ unsigned long fclk = 0;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
+ if (width != out_width || height != out_height)
+ return -EINVAL;
+ else
+ return 0;
+ }
+
+ if (out_width < width / maxdownscale ||
+ out_width > width * 8)
+ return -EINVAL;
+
+ if (out_height < height / maxdownscale ||
+ out_height > height * 8)
+ return -EINVAL;
+
+ /* Must use 5-tap filter? */
+ *five_taps = height > out_height * 2;
+
+ if (!*five_taps) {
+ fclk = calc_fclk(channel, width, height, out_width,
+ out_height);
+
+ /* Try 5-tap filter if 3-tap fclk is too high */
+ if (cpu_is_omap34xx() && height > out_height &&
+ fclk > dispc_fclk_rate())
+ *five_taps = true;
+ }
+
+ if (width > (2048 >> *five_taps)) {
+ DSSERR("failed to set up scaling, fclk too low\n");
+ return -EINVAL;
+ }
+
+ if (*five_taps)
+ fclk = calc_fclk_five_taps(channel, width, height,
+ out_width, out_height, color_mode);
+
+ DSSDBG("required fclk rate = %lu Hz\n", fclk);
+ DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
+
+ if (!fclk || fclk > dispc_fclk_rate()) {
+ DSSERR("failed to set up scaling, "
+ "required fclk rate = %lu Hz, "
+ "current fclk rate = %lu Hz\n",
+ fclk, dispc_fclk_rate());
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
+ bool ilace, enum omap_channel channel, bool replication,
+ u32 fifo_low, u32 fifo_high)
+{
+ struct omap_overlay *ovl = omap_dss_get_overlay(plane);
+ bool five_taps = false;
bool fieldmode = 0;
- int cconv = 0;
+ int r, cconv = 0;
unsigned offset0, offset1;
s32 row_inc;
s32 pix_inc;
- u16 frame_height = height;
+ u16 frame_height = oi->height;
unsigned int field_offset = 0;
- DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> "
- "%dx%d, ilace %d, cmode %x, rot %d, mir %d chan %d\n",
- plane, paddr, screen_width, pos_x, pos_y,
- width, height,
- out_width, out_height,
- ilace, color_mode,
- rotation, mirror, channel);
+ DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> "
+ "%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d repl %d "
+ "fifo_low %d fifo high %d\n", plane, oi->paddr, oi->p_uv_addr,
+ oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height,
+ oi->out_width, oi->out_height, oi->color_mode, oi->rotation,
+ oi->mirror, ilace, channel, replication, fifo_low, fifo_high);
- if (paddr == 0)
+ if (oi->paddr == 0)
return -EINVAL;
- if (ilace && height == out_height)
+ if (ilace && oi->height == oi->out_height)
fieldmode = 1;
if (ilace) {
if (fieldmode)
- height /= 2;
- pos_y /= 2;
- out_height /= 2;
+ oi->height /= 2;
+ oi->pos_y /= 2;
+ oi->out_height /= 2;
DSSDBG("adjusting for ilace: height %d, pos_y %d, "
"out_height %d\n",
- height, pos_y, out_height);
+ oi->height, oi->pos_y, oi->out_height);
}
- if (!dss_feat_color_mode_supported(plane, color_mode))
+ if (!dss_feat_color_mode_supported(plane, oi->color_mode))
return -EINVAL;
- if (plane == OMAP_DSS_GFX) {
- if (width != out_width || height != out_height)
- return -EINVAL;
- } else {
- /* video plane */
+ r = dispc_ovl_calc_scaling(plane, channel, oi->width, oi->height,
+ oi->out_width, oi->out_height, oi->color_mode,
+ &five_taps);
+ if (r)
+ return r;
- unsigned long fclk = 0;
-
- if (out_width < width / maxdownscale ||
- out_width > width * 8)
- return -EINVAL;
-
- if (out_height < height / maxdownscale ||
- out_height > height * 8)
- return -EINVAL;
-
- if (color_mode == OMAP_DSS_COLOR_YUV2 ||
- color_mode == OMAP_DSS_COLOR_UYVY ||
- color_mode == OMAP_DSS_COLOR_NV12)
- cconv = 1;
-
- /* Must use 5-tap filter? */
- five_taps = height > out_height * 2;
-
- if (!five_taps) {
- fclk = calc_fclk(channel, width, height, out_width,
- out_height);
-
- /* Try 5-tap filter if 3-tap fclk is too high */
- if (cpu_is_omap34xx() && height > out_height &&
- fclk > dispc_fclk_rate())
- five_taps = true;
- }
-
- if (width > (2048 >> five_taps)) {
- DSSERR("failed to set up scaling, fclk too low\n");
- return -EINVAL;
- }
-
- if (five_taps)
- fclk = calc_fclk_five_taps(channel, width, height,
- out_width, out_height, color_mode);
-
- DSSDBG("required fclk rate = %lu Hz\n", fclk);
- DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
-
- if (!fclk || fclk > dispc_fclk_rate()) {
- DSSERR("failed to set up scaling, "
- "required fclk rate = %lu Hz, "
- "current fclk rate = %lu Hz\n",
- fclk, dispc_fclk_rate());
- return -EINVAL;
- }
- }
+ if (oi->color_mode == OMAP_DSS_COLOR_YUV2 ||
+ oi->color_mode == OMAP_DSS_COLOR_UYVY ||
+ oi->color_mode == OMAP_DSS_COLOR_NV12)
+ cconv = 1;
if (ilace && !fieldmode) {
/*
@@ -1963,69 +1830,76 @@
* so the integer part must be added to the base address of the
* bottom field.
*/
- if (!height || height == out_height)
+ if (!oi->height || oi->height == oi->out_height)
field_offset = 0;
else
- field_offset = height / out_height / 2;
+ field_offset = oi->height / oi->out_height / 2;
}
/* Fields are independent but interleaved in memory. */
if (fieldmode)
field_offset = 1;
- if (rotation_type == OMAP_DSS_ROT_DMA)
- calc_dma_rotation_offset(rotation, mirror,
- screen_width, width, frame_height, color_mode,
- fieldmode, field_offset,
+ if (oi->rotation_type == OMAP_DSS_ROT_DMA)
+ calc_dma_rotation_offset(oi->rotation, oi->mirror,
+ oi->screen_width, oi->width, frame_height,
+ oi->color_mode, fieldmode, field_offset,
&offset0, &offset1, &row_inc, &pix_inc);
else
- calc_vrfb_rotation_offset(rotation, mirror,
- screen_width, width, frame_height, color_mode,
- fieldmode, field_offset,
+ calc_vrfb_rotation_offset(oi->rotation, oi->mirror,
+ oi->screen_width, oi->width, frame_height,
+ oi->color_mode, fieldmode, field_offset,
&offset0, &offset1, &row_inc, &pix_inc);
DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
offset0, offset1, row_inc, pix_inc);
- _dispc_set_color_mode(plane, color_mode);
+ dispc_ovl_set_color_mode(plane, oi->color_mode);
- _dispc_set_plane_ba0(plane, paddr + offset0);
- _dispc_set_plane_ba1(plane, paddr + offset1);
+ dispc_ovl_set_ba0(plane, oi->paddr + offset0);
+ dispc_ovl_set_ba1(plane, oi->paddr + offset1);
- if (OMAP_DSS_COLOR_NV12 == color_mode) {
- _dispc_set_plane_ba0_uv(plane, puv_addr + offset0);
- _dispc_set_plane_ba1_uv(plane, puv_addr + offset1);
+ if (OMAP_DSS_COLOR_NV12 == oi->color_mode) {
+ dispc_ovl_set_ba0_uv(plane, oi->p_uv_addr + offset0);
+ dispc_ovl_set_ba1_uv(plane, oi->p_uv_addr + offset1);
}
- _dispc_set_row_inc(plane, row_inc);
- _dispc_set_pix_inc(plane, pix_inc);
+ dispc_ovl_set_row_inc(plane, row_inc);
+ dispc_ovl_set_pix_inc(plane, pix_inc);
- DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height,
- out_width, out_height);
+ DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, oi->width,
+ oi->height, oi->out_width, oi->out_height);
- _dispc_set_plane_pos(plane, pos_x, pos_y);
+ dispc_ovl_set_pos(plane, oi->pos_x, oi->pos_y);
- _dispc_set_pic_size(plane, width, height);
+ dispc_ovl_set_pic_size(plane, oi->width, oi->height);
- if (plane != OMAP_DSS_GFX) {
- _dispc_set_scaling(plane, width, height,
- out_width, out_height,
+ if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) {
+ dispc_ovl_set_scaling(plane, oi->width, oi->height,
+ oi->out_width, oi->out_height,
ilace, five_taps, fieldmode,
- color_mode, rotation);
- _dispc_set_vid_size(plane, out_width, out_height);
- _dispc_set_vid_color_conv(plane, cconv);
+ oi->color_mode, oi->rotation);
+ dispc_ovl_set_vid_size(plane, oi->out_width, oi->out_height);
+ dispc_ovl_set_vid_color_conv(plane, cconv);
}
- _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode);
+ dispc_ovl_set_rotation_attrs(plane, oi->rotation, oi->mirror,
+ oi->color_mode);
- _dispc_set_pre_mult_alpha(plane, pre_mult_alpha);
- _dispc_setup_global_alpha(plane, global_alpha);
+ dispc_ovl_set_zorder(plane, oi->zorder);
+ dispc_ovl_set_pre_mult_alpha(plane, oi->pre_mult_alpha);
+ dispc_ovl_setup_global_alpha(plane, oi->global_alpha);
+
+ dispc_ovl_set_channel_out(plane, channel);
+
+ dispc_ovl_enable_replication(plane, replication);
+ dispc_ovl_set_fifo_threshold(plane, fifo_low, fifo_high);
return 0;
}
-int dispc_enable_plane(enum omap_plane plane, bool enable)
+int dispc_ovl_enable(enum omap_plane plane, bool enable)
{
DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
@@ -2048,7 +1922,7 @@
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0);
}
-static void dispc_enable_lcd_out(enum omap_channel channel, bool enable)
+static void dispc_mgr_enable_lcd_out(enum omap_channel channel, bool enable)
{
struct completion frame_done_completion;
bool is_on;
@@ -2095,14 +1969,19 @@
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1);
}
-static void dispc_enable_digit_out(bool enable)
+static void dispc_mgr_enable_digit_out(bool enable)
{
struct completion frame_done_completion;
- int r;
+ enum dss_hdmi_venc_clk_source_select src;
+ int r, i;
+ u32 irq_mask;
+ int num_irqs;
if (REG_GET(DISPC_CONTROL, 1, 1) == enable)
return;
+ src = dss_get_hdmi_venc_clk_source();
+
if (enable) {
unsigned long flags;
/* When we enable digit output, we'll get an extra digit
@@ -2119,43 +1998,47 @@
* wait for the extra sync losts */
init_completion(&frame_done_completion);
+ if (src == DSS_HDMI_M_PCLK && enable == false) {
+ irq_mask = DISPC_IRQ_FRAMEDONETV;
+ num_irqs = 1;
+ } else {
+ irq_mask = DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD;
+ /* XXX I understand from TRM that we should only wait for the
+ * current field to complete. But it seems we have to wait for
+ * both fields */
+ num_irqs = 2;
+ }
+
r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion,
- DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
+ irq_mask);
if (r)
- DSSERR("failed to register EVSYNC isr\n");
+ DSSERR("failed to register %x isr\n", irq_mask);
_enable_digit_out(enable);
- /* XXX I understand from TRM that we should only wait for the
- * current field to complete. But it seems we have to wait
- * for both fields */
- if (!wait_for_completion_timeout(&frame_done_completion,
- msecs_to_jiffies(100)))
- DSSERR("timeout waiting for EVSYNC\n");
+ for (i = 0; i < num_irqs; ++i) {
+ if (!wait_for_completion_timeout(&frame_done_completion,
+ msecs_to_jiffies(100)))
+ DSSERR("timeout waiting for digit out to %s\n",
+ enable ? "start" : "stop");
+ }
- if (!wait_for_completion_timeout(&frame_done_completion,
- msecs_to_jiffies(100)))
- DSSERR("timeout waiting for EVSYNC\n");
-
- r = omap_dispc_unregister_isr(dispc_disable_isr,
- &frame_done_completion,
- DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
+ r = omap_dispc_unregister_isr(dispc_disable_isr, &frame_done_completion,
+ irq_mask);
if (r)
- DSSERR("failed to unregister EVSYNC isr\n");
+ DSSERR("failed to unregister %x isr\n", irq_mask);
if (enable) {
unsigned long flags;
spin_lock_irqsave(&dispc.irq_lock, flags);
- dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
- if (dss_has_feature(FEAT_MGR_LCD2))
- dispc.irq_error_mask |= DISPC_IRQ_SYNC_LOST2;
+ dispc.irq_error_mask |= DISPC_IRQ_SYNC_LOST_DIGIT;
dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
_omap_dispc_set_irqs();
spin_unlock_irqrestore(&dispc.irq_lock, flags);
}
}
-bool dispc_is_channel_enabled(enum omap_channel channel)
+bool dispc_mgr_is_enabled(enum omap_channel channel)
{
if (channel == OMAP_DSS_CHANNEL_LCD)
return !!REG_GET(DISPC_CONTROL, 0, 0);
@@ -2167,13 +2050,12 @@
BUG();
}
-void dispc_enable_channel(enum omap_channel channel, bool enable)
+void dispc_mgr_enable(enum omap_channel channel, bool enable)
{
- if (channel == OMAP_DSS_CHANNEL_LCD ||
- channel == OMAP_DSS_CHANNEL_LCD2)
- dispc_enable_lcd_out(channel, enable);
+ if (dispc_mgr_is_lcd(channel))
+ dispc_mgr_enable_lcd_out(channel, enable);
else if (channel == OMAP_DSS_CHANNEL_DIGIT)
- dispc_enable_digit_out(enable);
+ dispc_mgr_enable_digit_out(enable);
else
BUG();
}
@@ -2202,7 +2084,7 @@
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27);
}
-void dispc_enable_fifohandcheck(enum omap_channel channel, bool enable)
+void dispc_mgr_enable_fifohandcheck(enum omap_channel channel, bool enable)
{
if (channel == OMAP_DSS_CHANNEL_LCD2)
REG_FLD_MOD(DISPC_CONFIG2, enable ? 1 : 0, 16, 16);
@@ -2211,7 +2093,7 @@
}
-void dispc_set_lcd_display_type(enum omap_channel channel,
+void dispc_mgr_set_lcd_display_type(enum omap_channel channel,
enum omap_lcd_display_type type)
{
int mode;
@@ -2242,12 +2124,12 @@
}
-void dispc_set_default_color(enum omap_channel channel, u32 color)
+void dispc_mgr_set_default_color(enum omap_channel channel, u32 color)
{
dispc_write_reg(DISPC_DEFAULT_COLOR(channel), color);
}
-u32 dispc_get_default_color(enum omap_channel channel)
+u32 dispc_mgr_get_default_color(enum omap_channel channel)
{
u32 l;
@@ -2260,7 +2142,7 @@
return l;
}
-void dispc_set_trans_key(enum omap_channel ch,
+void dispc_mgr_set_trans_key(enum omap_channel ch,
enum omap_dss_trans_key_type type,
u32 trans_key)
{
@@ -2274,7 +2156,7 @@
dispc_write_reg(DISPC_TRANS_COLOR(ch), trans_key);
}
-void dispc_get_trans_key(enum omap_channel ch,
+void dispc_mgr_get_trans_key(enum omap_channel ch,
enum omap_dss_trans_key_type *type,
u32 *trans_key)
{
@@ -2293,7 +2175,7 @@
*trans_key = dispc_read_reg(DISPC_TRANS_COLOR(ch));
}
-void dispc_enable_trans_key(enum omap_channel ch, bool enable)
+void dispc_mgr_enable_trans_key(enum omap_channel ch, bool enable)
{
if (ch == OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10);
@@ -2302,39 +2184,36 @@
else /* OMAP_DSS_CHANNEL_LCD2 */
REG_FLD_MOD(DISPC_CONFIG2, enable, 10, 10);
}
-void dispc_enable_alpha_blending(enum omap_channel ch, bool enable)
+
+void dispc_mgr_enable_alpha_fixed_zorder(enum omap_channel ch, bool enable)
{
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
+ if (!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER))
return;
if (ch == OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18);
else if (ch == OMAP_DSS_CHANNEL_DIGIT)
REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19);
- else /* OMAP_DSS_CHANNEL_LCD2 */
- REG_FLD_MOD(DISPC_CONFIG2, enable, 18, 18);
}
-bool dispc_alpha_blending_enabled(enum omap_channel ch)
+
+bool dispc_mgr_alpha_fixed_zorder_enabled(enum omap_channel ch)
{
bool enabled;
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
+ if (!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER))
return false;
if (ch == OMAP_DSS_CHANNEL_LCD)
enabled = REG_GET(DISPC_CONFIG, 18, 18);
else if (ch == OMAP_DSS_CHANNEL_DIGIT)
enabled = REG_GET(DISPC_CONFIG, 19, 19);
- else if (ch == OMAP_DSS_CHANNEL_LCD2)
- enabled = REG_GET(DISPC_CONFIG2, 18, 18);
else
BUG();
return enabled;
}
-
-bool dispc_trans_key_enabled(enum omap_channel ch)
+bool dispc_mgr_trans_key_enabled(enum omap_channel ch)
{
bool enabled;
@@ -2351,7 +2230,7 @@
}
-void dispc_set_tft_data_lines(enum omap_channel channel, u8 data_lines)
+void dispc_mgr_set_tft_data_lines(enum omap_channel channel, u8 data_lines)
{
int code;
@@ -2379,46 +2258,41 @@
REG_FLD_MOD(DISPC_CONTROL, code, 9, 8);
}
-void dispc_set_parallel_interface_mode(enum omap_channel channel,
- enum omap_parallel_interface_mode mode)
+void dispc_mgr_set_io_pad_mode(enum dss_io_pad_mode mode)
{
u32 l;
- int stallmode;
- int gpout0 = 1;
- int gpout1;
+ int gpout0, gpout1;
switch (mode) {
- case OMAP_DSS_PARALLELMODE_BYPASS:
- stallmode = 0;
- gpout1 = 1;
- break;
-
- case OMAP_DSS_PARALLELMODE_RFBI:
- stallmode = 1;
+ case DSS_IO_PAD_MODE_RESET:
+ gpout0 = 0;
gpout1 = 0;
break;
-
- case OMAP_DSS_PARALLELMODE_DSI:
- stallmode = 1;
+ case DSS_IO_PAD_MODE_RFBI:
+ gpout0 = 1;
+ gpout1 = 0;
+ break;
+ case DSS_IO_PAD_MODE_BYPASS:
+ gpout0 = 1;
gpout1 = 1;
break;
-
default:
BUG();
return;
}
- if (channel == OMAP_DSS_CHANNEL_LCD2) {
- l = dispc_read_reg(DISPC_CONTROL2);
- l = FLD_MOD(l, stallmode, 11, 11);
- dispc_write_reg(DISPC_CONTROL2, l);
- } else {
- l = dispc_read_reg(DISPC_CONTROL);
- l = FLD_MOD(l, stallmode, 11, 11);
- l = FLD_MOD(l, gpout0, 15, 15);
- l = FLD_MOD(l, gpout1, 16, 16);
- dispc_write_reg(DISPC_CONTROL, l);
- }
+ l = dispc_read_reg(DISPC_CONTROL);
+ l = FLD_MOD(l, gpout0, 15, 15);
+ l = FLD_MOD(l, gpout1, 16, 16);
+ dispc_write_reg(DISPC_CONTROL, l);
+}
+
+void dispc_mgr_enable_stallmode(enum omap_channel channel, bool enable)
+{
+ if (channel == OMAP_DSS_CHANNEL_LCD2)
+ REG_FLD_MOD(DISPC_CONTROL2, enable, 11, 11);
+ else
+ REG_FLD_MOD(DISPC_CONTROL, enable, 11, 11);
}
static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
@@ -2452,7 +2326,7 @@
timings->vfp, timings->vbp);
}
-static void _dispc_set_lcd_timings(enum omap_channel channel, int hsw,
+static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
int hfp, int hbp, int vsw, int vfp, int vbp)
{
u32 timing_h, timing_v;
@@ -2476,7 +2350,7 @@
}
/* change name to mode? */
-void dispc_set_lcd_timings(enum omap_channel channel,
+void dispc_mgr_set_lcd_timings(enum omap_channel channel,
struct omap_video_timings *timings)
{
unsigned xtot, ytot;
@@ -2487,11 +2361,11 @@
timings->vfp, timings->vbp))
BUG();
- _dispc_set_lcd_timings(channel, timings->hsw, timings->hfp,
+ _dispc_mgr_set_lcd_timings(channel, timings->hsw, timings->hfp,
timings->hbp, timings->vsw, timings->vfp,
timings->vbp);
- dispc_set_lcd_size(channel, timings->x_res, timings->y_res);
+ dispc_mgr_set_lcd_size(channel, timings->x_res, timings->y_res);
xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp;
ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp;
@@ -2509,17 +2383,17 @@
DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
}
-static void dispc_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
+static void dispc_mgr_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
u16 pck_div)
{
BUG_ON(lck_div < 1);
- BUG_ON(pck_div < 2);
+ BUG_ON(pck_div < 1);
dispc_write_reg(DISPC_DIVISORo(channel),
FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0));
}
-static void dispc_get_lcd_divisor(enum omap_channel channel, int *lck_div,
+static void dispc_mgr_get_lcd_divisor(enum omap_channel channel, int *lck_div,
int *pck_div)
{
u32 l;
@@ -2552,7 +2426,7 @@
return r;
}
-unsigned long dispc_lclk_rate(enum omap_channel channel)
+unsigned long dispc_mgr_lclk_rate(enum omap_channel channel)
{
struct platform_device *dsidev;
int lcd;
@@ -2582,19 +2456,34 @@
return r / lcd;
}
-unsigned long dispc_pclk_rate(enum omap_channel channel)
+unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
{
- int pcd;
unsigned long r;
- u32 l;
- l = dispc_read_reg(DISPC_DIVISORo(channel));
+ if (dispc_mgr_is_lcd(channel)) {
+ int pcd;
+ u32 l;
- pcd = FLD_GET(l, 7, 0);
+ l = dispc_read_reg(DISPC_DIVISORo(channel));
- r = dispc_lclk_rate(channel);
+ pcd = FLD_GET(l, 7, 0);
- return r / pcd;
+ r = dispc_mgr_lclk_rate(channel);
+
+ return r / pcd;
+ } else {
+ struct omap_dss_device *dssdev =
+ dispc_mgr_get_device(channel);
+
+ switch (dssdev->type) {
+ case OMAP_DISPLAY_TYPE_VENC:
+ return venc_get_pixel_clock();
+ case OMAP_DISPLAY_TYPE_HDMI:
+ return hdmi_get_pixel_clock();
+ default:
+ BUG();
+ }
+ }
}
void dispc_dump_clocks(struct seq_file *s)
@@ -2631,12 +2520,12 @@
dss_get_generic_clk_source_name(lcd_clk_src),
dss_feat_get_clk_source_name(lcd_clk_src));
- dispc_get_lcd_divisor(OMAP_DSS_CHANNEL_LCD, &lcd, &pcd);
+ dispc_mgr_get_lcd_divisor(OMAP_DSS_CHANNEL_LCD, &lcd, &pcd);
seq_printf(s, "lck\t\t%-16lulck div\t%u\n",
- dispc_lclk_rate(OMAP_DSS_CHANNEL_LCD), lcd);
+ dispc_mgr_lclk_rate(OMAP_DSS_CHANNEL_LCD), lcd);
seq_printf(s, "pck\t\t%-16lupck div\t%u\n",
- dispc_pclk_rate(OMAP_DSS_CHANNEL_LCD), pcd);
+ dispc_mgr_pclk_rate(OMAP_DSS_CHANNEL_LCD), pcd);
if (dss_has_feature(FEAT_MGR_LCD2)) {
seq_printf(s, "- LCD2 -\n");
@@ -2646,12 +2535,12 @@
dss_get_generic_clk_source_name(lcd_clk_src),
dss_feat_get_clk_source_name(lcd_clk_src));
- dispc_get_lcd_divisor(OMAP_DSS_CHANNEL_LCD2, &lcd, &pcd);
+ dispc_mgr_get_lcd_divisor(OMAP_DSS_CHANNEL_LCD2, &lcd, &pcd);
seq_printf(s, "lck\t\t%-16lulck div\t%u\n",
- dispc_lclk_rate(OMAP_DSS_CHANNEL_LCD2), lcd);
+ dispc_mgr_lclk_rate(OMAP_DSS_CHANNEL_LCD2), lcd);
seq_printf(s, "pck\t\t%-16lupck div\t%u\n",
- dispc_pclk_rate(OMAP_DSS_CHANNEL_LCD2), pcd);
+ dispc_mgr_pclk_rate(OMAP_DSS_CHANNEL_LCD2), pcd);
}
dispc_runtime_put();
@@ -2692,6 +2581,10 @@
PIS(VID1_END_WIN);
PIS(VID2_FIFO_UNDERFLOW);
PIS(VID2_END_WIN);
+ if (dss_feat_get_num_ovls() > 3) {
+ PIS(VID3_FIFO_UNDERFLOW);
+ PIS(VID3_END_WIN);
+ }
PIS(SYNC_LOST);
PIS(SYNC_LOST_DIGIT);
PIS(WAKEUP);
@@ -2707,11 +2600,26 @@
void dispc_dump_regs(struct seq_file *s)
{
+ int i, j;
+ const char *mgr_names[] = {
+ [OMAP_DSS_CHANNEL_LCD] = "LCD",
+ [OMAP_DSS_CHANNEL_DIGIT] = "TV",
+ [OMAP_DSS_CHANNEL_LCD2] = "LCD2",
+ };
+ const char *ovl_names[] = {
+ [OMAP_DSS_GFX] = "GFX",
+ [OMAP_DSS_VIDEO1] = "VID1",
+ [OMAP_DSS_VIDEO2] = "VID2",
+ [OMAP_DSS_VIDEO3] = "VID3",
+ };
+ const char **p_names;
+
#define DUMPREG(r) seq_printf(s, "%-50s %08x\n", #r, dispc_read_reg(r))
if (dispc_runtime_get())
return;
+ /* DISPC common registers */
DUMPREG(DISPC_REVISION);
DUMPREG(DISPC_SYSCONFIG);
DUMPREG(DISPC_SYSSTATUS);
@@ -2720,247 +2628,139 @@
DUMPREG(DISPC_CONTROL);
DUMPREG(DISPC_CONFIG);
DUMPREG(DISPC_CAPABLE);
- DUMPREG(DISPC_DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_DEFAULT_COLOR(OMAP_DSS_CHANNEL_DIGIT));
- DUMPREG(DISPC_TRANS_COLOR(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_TRANS_COLOR(OMAP_DSS_CHANNEL_DIGIT));
DUMPREG(DISPC_LINE_STATUS);
DUMPREG(DISPC_LINE_NUMBER);
- DUMPREG(DISPC_TIMING_H(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_TIMING_V(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_POL_FREQ(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD));
- if (dss_has_feature(FEAT_GLOBAL_ALPHA))
+ if (dss_has_feature(FEAT_ALPHA_FIXED_ZORDER) ||
+ dss_has_feature(FEAT_ALPHA_FREE_ZORDER))
DUMPREG(DISPC_GLOBAL_ALPHA);
- DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT));
- DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_LCD));
if (dss_has_feature(FEAT_MGR_LCD2)) {
DUMPREG(DISPC_CONTROL2);
DUMPREG(DISPC_CONFIG2);
- DUMPREG(DISPC_DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_TRANS_COLOR(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_TIMING_H(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_TIMING_V(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_POL_FREQ(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_LCD2));
}
- DUMPREG(DISPC_OVL_BA0(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_BA1(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_POSITION(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_SIZE(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_ATTRIBUTES(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_FIFO_THRESHOLD(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_FIFO_SIZE_STATUS(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_ROW_INC(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_PIXEL_INC(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_WINDOW_SKIP(OMAP_DSS_GFX));
- DUMPREG(DISPC_OVL_TABLE_BA(OMAP_DSS_GFX));
+#undef DUMPREG
- DUMPREG(DISPC_DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD));
+#define DISPC_REG(i, name) name(i)
+#define DUMPREG(i, r) seq_printf(s, "%s(%s)%*s %08x\n", #r, p_names[i], \
+ 48 - strlen(#r) - strlen(p_names[i]), " ", \
+ dispc_read_reg(DISPC_REG(i, r)))
- if (dss_has_feature(FEAT_CPR)) {
- DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
- }
- if (dss_has_feature(FEAT_MGR_LCD2)) {
- DUMPREG(DISPC_DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2));
+ p_names = mgr_names;
+
+ /* DISPC channel specific registers */
+ for (i = 0; i < dss_feat_get_num_mgrs(); i++) {
+ DUMPREG(i, DISPC_DEFAULT_COLOR);
+ DUMPREG(i, DISPC_TRANS_COLOR);
+ DUMPREG(i, DISPC_SIZE_MGR);
+
+ if (i == OMAP_DSS_CHANNEL_DIGIT)
+ continue;
+
+ DUMPREG(i, DISPC_DEFAULT_COLOR);
+ DUMPREG(i, DISPC_TRANS_COLOR);
+ DUMPREG(i, DISPC_TIMING_H);
+ DUMPREG(i, DISPC_TIMING_V);
+ DUMPREG(i, DISPC_POL_FREQ);
+ DUMPREG(i, DISPC_DIVISORo);
+ DUMPREG(i, DISPC_SIZE_MGR);
+
+ DUMPREG(i, DISPC_DATA_CYCLE1);
+ DUMPREG(i, DISPC_DATA_CYCLE2);
+ DUMPREG(i, DISPC_DATA_CYCLE3);
if (dss_has_feature(FEAT_CPR)) {
- DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
+ DUMPREG(i, DISPC_CPR_COEF_R);
+ DUMPREG(i, DISPC_CPR_COEF_G);
+ DUMPREG(i, DISPC_CPR_COEF_B);
}
}
- if (dss_has_feature(FEAT_PRELOAD))
- DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_GFX));
+ p_names = ovl_names;
- DUMPREG(DISPC_OVL_BA0(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_BA1(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_POSITION(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_SIZE(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_ATTRIBUTES(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_FIFO_THRESHOLD(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_FIFO_SIZE_STATUS(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_ROW_INC(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_PIXEL_INC(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_FIR(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_PICTURE_SIZE(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_ACCU0(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_ACCU1(OMAP_DSS_VIDEO1));
+ for (i = 0; i < dss_feat_get_num_ovls(); i++) {
+ DUMPREG(i, DISPC_OVL_BA0);
+ DUMPREG(i, DISPC_OVL_BA1);
+ DUMPREG(i, DISPC_OVL_POSITION);
+ DUMPREG(i, DISPC_OVL_SIZE);
+ DUMPREG(i, DISPC_OVL_ATTRIBUTES);
+ DUMPREG(i, DISPC_OVL_FIFO_THRESHOLD);
+ DUMPREG(i, DISPC_OVL_FIFO_SIZE_STATUS);
+ DUMPREG(i, DISPC_OVL_ROW_INC);
+ DUMPREG(i, DISPC_OVL_PIXEL_INC);
+ if (dss_has_feature(FEAT_PRELOAD))
+ DUMPREG(i, DISPC_OVL_PRELOAD);
- DUMPREG(DISPC_OVL_BA0(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_BA1(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_POSITION(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_SIZE(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_ATTRIBUTES(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_FIFO_THRESHOLD(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_FIFO_SIZE_STATUS(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_ROW_INC(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_PIXEL_INC(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_FIR(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_PICTURE_SIZE(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_ACCU0(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_ACCU1(OMAP_DSS_VIDEO2));
+ if (i == OMAP_DSS_GFX) {
+ DUMPREG(i, DISPC_OVL_WINDOW_SKIP);
+ DUMPREG(i, DISPC_OVL_TABLE_BA);
+ continue;
+ }
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO1, 7));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO1, 7));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 4));
- if (dss_has_feature(FEAT_FIR_COEF_V)) {
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 7));
+ DUMPREG(i, DISPC_OVL_FIR);
+ DUMPREG(i, DISPC_OVL_PICTURE_SIZE);
+ DUMPREG(i, DISPC_OVL_ACCU0);
+ DUMPREG(i, DISPC_OVL_ACCU1);
+ if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
+ DUMPREG(i, DISPC_OVL_BA0_UV);
+ DUMPREG(i, DISPC_OVL_BA1_UV);
+ DUMPREG(i, DISPC_OVL_FIR2);
+ DUMPREG(i, DISPC_OVL_ACCU2_0);
+ DUMPREG(i, DISPC_OVL_ACCU2_1);
+ }
+ if (dss_has_feature(FEAT_ATTR2))
+ DUMPREG(i, DISPC_OVL_ATTRIBUTES2);
+ if (dss_has_feature(FEAT_PRELOAD))
+ DUMPREG(i, DISPC_OVL_PRELOAD);
}
- if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
- DUMPREG(DISPC_OVL_BA0_UV(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_BA1_UV(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_FIR2(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_ACCU2_0(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_ACCU2_1(OMAP_DSS_VIDEO1));
+#undef DISPC_REG
+#undef DUMPREG
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO1, 7));
+#define DISPC_REG(plane, name, i) name(plane, i)
+#define DUMPREG(plane, name, i) \
+ seq_printf(s, "%s_%d(%s)%*s %08x\n", #name, i, p_names[plane], \
+ 46 - strlen(#name) - strlen(p_names[plane]), " ", \
+ dispc_read_reg(DISPC_REG(plane, name, i)))
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO1, 7));
+ /* Video pipeline coefficient registers */
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO1, 7));
- }
- if (dss_has_feature(FEAT_ATTR2))
- DUMPREG(DISPC_OVL_ATTRIBUTES2(OMAP_DSS_VIDEO1));
+ /* start from OMAP_DSS_VIDEO1 */
+ for (i = 1; i < dss_feat_get_num_ovls(); i++) {
+ for (j = 0; j < 8; j++)
+ DUMPREG(i, DISPC_OVL_FIR_COEF_H, j);
+ for (j = 0; j < 8; j++)
+ DUMPREG(i, DISPC_OVL_FIR_COEF_HV, j);
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_H(OMAP_DSS_VIDEO2, 7));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_HV(OMAP_DSS_VIDEO2, 7));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 4));
+ for (j = 0; j < 5; j++)
+ DUMPREG(i, DISPC_OVL_CONV_COEF, j);
- if (dss_has_feature(FEAT_FIR_COEF_V)) {
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 7));
- }
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ for (j = 0; j < 8; j++)
+ DUMPREG(i, DISPC_OVL_FIR_COEF_V, j);
+ }
- if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
- DUMPREG(DISPC_OVL_BA0_UV(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_BA1_UV(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_FIR2(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_ACCU2_0(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_ACCU2_1(OMAP_DSS_VIDEO2));
+ if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
+ for (j = 0; j < 8; j++)
+ DUMPREG(i, DISPC_OVL_FIR_COEF_H2, j);
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_H2(OMAP_DSS_VIDEO2, 7));
+ for (j = 0; j < 8; j++)
+ DUMPREG(i, DISPC_OVL_FIR_COEF_HV2, j);
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_HV2(OMAP_DSS_VIDEO2, 7));
-
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_V2(OMAP_DSS_VIDEO2, 7));
- }
- if (dss_has_feature(FEAT_ATTR2))
- DUMPREG(DISPC_OVL_ATTRIBUTES2(OMAP_DSS_VIDEO2));
-
- if (dss_has_feature(FEAT_PRELOAD)) {
- DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_VIDEO2));
+ for (j = 0; j < 8; j++)
+ DUMPREG(i, DISPC_OVL_FIR_COEF_V2, j);
+ }
}
dispc_runtime_put();
+
+#undef DISPC_REG
#undef DUMPREG
}
-static void _dispc_set_pol_freq(enum omap_channel channel, bool onoff, bool rf,
- bool ieo, bool ipc, bool ihs, bool ivs, u8 acbi, u8 acb)
+static void _dispc_mgr_set_pol_freq(enum omap_channel channel, bool onoff,
+ bool rf, bool ieo, bool ipc, bool ihs, bool ivs, u8 acbi,
+ u8 acb)
{
u32 l = 0;
@@ -2979,10 +2779,10 @@
dispc_write_reg(DISPC_POL_FREQ(channel), l);
}
-void dispc_set_pol_freq(enum omap_channel channel,
+void dispc_mgr_set_pol_freq(enum omap_channel channel,
enum omap_panel_config config, u8 acbi, u8 acb)
{
- _dispc_set_pol_freq(channel, (config & OMAP_DSS_LCD_ONOFF) != 0,
+ _dispc_mgr_set_pol_freq(channel, (config & OMAP_DSS_LCD_ONOFF) != 0,
(config & OMAP_DSS_LCD_RF) != 0,
(config & OMAP_DSS_LCD_IEO) != 0,
(config & OMAP_DSS_LCD_IPC) != 0,
@@ -2995,11 +2795,17 @@
void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
struct dispc_clock_info *cinfo)
{
- u16 pcd_min = is_tft ? 2 : 3;
+ u16 pcd_min, pcd_max;
unsigned long best_pck;
u16 best_ld, cur_ld;
u16 best_pd, cur_pd;
+ pcd_min = dss_feat_get_param_min(FEAT_PARAM_DSS_PCD);
+ pcd_max = dss_feat_get_param_max(FEAT_PARAM_DSS_PCD);
+
+ if (!is_tft)
+ pcd_min = 3;
+
best_pck = 0;
best_ld = 0;
best_pd = 0;
@@ -3007,7 +2813,7 @@
for (cur_ld = 1; cur_ld <= 255; ++cur_ld) {
unsigned long lck = fck / cur_ld;
- for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) {
+ for (cur_pd = pcd_min; cur_pd <= pcd_max; ++cur_pd) {
unsigned long pck = lck / cur_pd;
long old_delta = abs(best_pck - req_pck);
long new_delta = abs(pck - req_pck);
@@ -3042,7 +2848,7 @@
{
if (cinfo->lck_div > 255 || cinfo->lck_div == 0)
return -EINVAL;
- if (cinfo->pck_div < 2 || cinfo->pck_div > 255)
+ if (cinfo->pck_div < 1 || cinfo->pck_div > 255)
return -EINVAL;
cinfo->lck = dispc_fclk_rate / cinfo->lck_div;
@@ -3051,18 +2857,18 @@
return 0;
}
-int dispc_set_clock_div(enum omap_channel channel,
+int dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo)
{
DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div);
DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div);
- dispc_set_lcd_divisor(channel, cinfo->lck_div, cinfo->pck_div);
+ dispc_mgr_set_lcd_divisor(channel, cinfo->lck_div, cinfo->pck_div);
return 0;
}
-int dispc_get_clock_div(enum omap_channel channel,
+int dispc_mgr_get_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo)
{
unsigned long fck;
@@ -3207,6 +3013,8 @@
PIS(OCP_ERR);
PIS(VID1_FIFO_UNDERFLOW);
PIS(VID2_FIFO_UNDERFLOW);
+ if (dss_feat_get_num_ovls() > 3)
+ PIS(VID3_FIFO_UNDERFLOW);
PIS(SYNC_LOST);
PIS(SYNC_LOST_DIGIT);
if (dss_has_feature(FEAT_MGR_LCD2))
@@ -3300,178 +3108,72 @@
int i;
u32 errors;
unsigned long flags;
+ static const unsigned fifo_underflow_bits[] = {
+ DISPC_IRQ_GFX_FIFO_UNDERFLOW,
+ DISPC_IRQ_VID1_FIFO_UNDERFLOW,
+ DISPC_IRQ_VID2_FIFO_UNDERFLOW,
+ DISPC_IRQ_VID3_FIFO_UNDERFLOW,
+ };
+
+ static const unsigned sync_lost_bits[] = {
+ DISPC_IRQ_SYNC_LOST,
+ DISPC_IRQ_SYNC_LOST_DIGIT,
+ DISPC_IRQ_SYNC_LOST2,
+ };
spin_lock_irqsave(&dispc.irq_lock, flags);
errors = dispc.error_irqs;
dispc.error_irqs = 0;
spin_unlock_irqrestore(&dispc.irq_lock, flags);
- if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) {
- DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n");
- for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
- struct omap_overlay *ovl;
- ovl = omap_dss_get_overlay(i);
+ dispc_runtime_get();
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
+ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+ struct omap_overlay *ovl;
+ unsigned bit;
- if (ovl->id == 0) {
- dispc_enable_plane(ovl->id, 0);
- dispc_go(ovl->manager->id);
- mdelay(50);
- break;
- }
+ ovl = omap_dss_get_overlay(i);
+ bit = fifo_underflow_bits[i];
+
+ if (bit & errors) {
+ DSSERR("FIFO UNDERFLOW on %s, disabling the overlay\n",
+ ovl->name);
+ dispc_ovl_enable(ovl->id, false);
+ dispc_mgr_go(ovl->manager->id);
+ mdelay(50);
}
}
- if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) {
- DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n");
- for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
- struct omap_overlay *ovl;
- ovl = omap_dss_get_overlay(i);
+ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+ struct omap_overlay_manager *mgr;
+ unsigned bit;
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
+ mgr = omap_dss_get_overlay_manager(i);
+ bit = sync_lost_bits[i];
- if (ovl->id == 1) {
- dispc_enable_plane(ovl->id, 0);
- dispc_go(ovl->manager->id);
- mdelay(50);
- break;
- }
- }
- }
+ if (bit & errors) {
+ struct omap_dss_device *dssdev = mgr->device;
+ bool enable;
- if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) {
- DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n");
- for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
- struct omap_overlay *ovl;
- ovl = omap_dss_get_overlay(i);
+ DSSERR("SYNC_LOST on channel %s, restarting the output "
+ "with video overlays disabled\n",
+ mgr->name);
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
+ enable = dssdev->state == OMAP_DSS_DISPLAY_ACTIVE;
+ dssdev->driver->disable(dssdev);
- if (ovl->id == 2) {
- dispc_enable_plane(ovl->id, 0);
- dispc_go(ovl->manager->id);
- mdelay(50);
- break;
- }
- }
- }
-
- if (errors & DISPC_IRQ_SYNC_LOST) {
- struct omap_overlay_manager *manager = NULL;
- bool enable = false;
-
- DSSERR("SYNC_LOST, disabling LCD\n");
-
- for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
- struct omap_overlay_manager *mgr;
- mgr = omap_dss_get_overlay_manager(i);
-
- if (mgr->id == OMAP_DSS_CHANNEL_LCD) {
- manager = mgr;
- enable = mgr->device->state ==
- OMAP_DSS_DISPLAY_ACTIVE;
- mgr->device->driver->disable(mgr->device);
- break;
- }
- }
-
- if (manager) {
- struct omap_dss_device *dssdev = manager->device;
for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
struct omap_overlay *ovl;
ovl = omap_dss_get_overlay(i);
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
-
- if (ovl->id != 0 && ovl->manager == manager)
- dispc_enable_plane(ovl->id, 0);
+ if (ovl->id != OMAP_DSS_GFX &&
+ ovl->manager == mgr)
+ dispc_ovl_enable(ovl->id, false);
}
- dispc_go(manager->id);
+ dispc_mgr_go(mgr->id);
mdelay(50);
- if (enable)
- dssdev->driver->enable(dssdev);
- }
- }
- if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) {
- struct omap_overlay_manager *manager = NULL;
- bool enable = false;
-
- DSSERR("SYNC_LOST_DIGIT, disabling TV\n");
-
- for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
- struct omap_overlay_manager *mgr;
- mgr = omap_dss_get_overlay_manager(i);
-
- if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) {
- manager = mgr;
- enable = mgr->device->state ==
- OMAP_DSS_DISPLAY_ACTIVE;
- mgr->device->driver->disable(mgr->device);
- break;
- }
- }
-
- if (manager) {
- struct omap_dss_device *dssdev = manager->device;
- for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
- struct omap_overlay *ovl;
- ovl = omap_dss_get_overlay(i);
-
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
-
- if (ovl->id != 0 && ovl->manager == manager)
- dispc_enable_plane(ovl->id, 0);
- }
-
- dispc_go(manager->id);
- mdelay(50);
- if (enable)
- dssdev->driver->enable(dssdev);
- }
- }
-
- if (errors & DISPC_IRQ_SYNC_LOST2) {
- struct omap_overlay_manager *manager = NULL;
- bool enable = false;
-
- DSSERR("SYNC_LOST for LCD2, disabling LCD2\n");
-
- for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
- struct omap_overlay_manager *mgr;
- mgr = omap_dss_get_overlay_manager(i);
-
- if (mgr->id == OMAP_DSS_CHANNEL_LCD2) {
- manager = mgr;
- enable = mgr->device->state ==
- OMAP_DSS_DISPLAY_ACTIVE;
- mgr->device->driver->disable(mgr->device);
- break;
- }
- }
-
- if (manager) {
- struct omap_dss_device *dssdev = manager->device;
- for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
- struct omap_overlay *ovl;
- ovl = omap_dss_get_overlay(i);
-
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
-
- if (ovl->id != 0 && ovl->manager == manager)
- dispc_enable_plane(ovl->id, 0);
- }
-
- dispc_go(manager->id);
- mdelay(50);
if (enable)
dssdev->driver->enable(dssdev);
}
@@ -3482,9 +3184,7 @@
for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
struct omap_overlay_manager *mgr;
mgr = omap_dss_get_overlay_manager(i);
-
- if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC)
- mgr->device->driver->disable(mgr->device);
+ mgr->device->driver->disable(mgr->device);
}
}
@@ -3492,6 +3192,8 @@
dispc.irq_error_mask |= errors;
_omap_dispc_set_irqs();
spin_unlock_irqrestore(&dispc.irq_lock, flags);
+
+ dispc_runtime_put();
}
int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout)
@@ -3586,6 +3288,8 @@
dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
if (dss_has_feature(FEAT_MGR_LCD2))
dispc.irq_error_mask |= DISPC_IRQ_SYNC_LOST2;
+ if (dss_feat_get_num_ovls() > 3)
+ dispc.irq_error_mask |= DISPC_IRQ_VID3_FIFO_UNDERFLOW;
/* there's SYNC_LOST_DIGIT waiting after enabling the DSS,
* so clear it */
@@ -3635,6 +3339,8 @@
dispc_read_plane_fifo_sizes();
dispc_configure_burst_sizes();
+
+ dispc_ovl_enable_zorder_planes();
}
/* DISPC HW IP initialisation */
@@ -3734,7 +3440,6 @@
static int dispc_runtime_suspend(struct device *dev)
{
dispc_save_context();
- clk_disable(dispc.dss_clk);
dss_runtime_put();
return 0;
@@ -3748,7 +3453,6 @@
if (r < 0)
return r;
- clk_enable(dispc.dss_clk);
dispc_restore_context();
return 0;
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/omap2/dss/dispc.h
index 6c9ee0a..c06efc3 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/omap2/dss/dispc.h
@@ -291,6 +291,8 @@
return 0x00BC;
case OMAP_DSS_VIDEO2:
return 0x014C;
+ case OMAP_DSS_VIDEO3:
+ return 0x0300;
default:
BUG();
}
@@ -304,6 +306,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0000;
+ case OMAP_DSS_VIDEO3:
+ return 0x0008;
default:
BUG();
}
@@ -316,6 +320,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0004;
+ case OMAP_DSS_VIDEO3:
+ return 0x000C;
default:
BUG();
}
@@ -330,6 +336,8 @@
return 0x0544;
case OMAP_DSS_VIDEO2:
return 0x04BC;
+ case OMAP_DSS_VIDEO3:
+ return 0x0310;
default:
BUG();
}
@@ -344,6 +352,8 @@
return 0x0548;
case OMAP_DSS_VIDEO2:
return 0x04C0;
+ case OMAP_DSS_VIDEO3:
+ return 0x0314;
default:
BUG();
}
@@ -356,6 +366,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0008;
+ case OMAP_DSS_VIDEO3:
+ return 0x009C;
default:
BUG();
}
@@ -368,6 +380,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x000C;
+ case OMAP_DSS_VIDEO3:
+ return 0x00A8;
default:
BUG();
}
@@ -381,6 +395,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0010;
+ case OMAP_DSS_VIDEO3:
+ return 0x0070;
default:
BUG();
}
@@ -395,6 +411,8 @@
return 0x0568;
case OMAP_DSS_VIDEO2:
return 0x04DC;
+ case OMAP_DSS_VIDEO3:
+ return 0x032C;
default:
BUG();
}
@@ -408,6 +426,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0014;
+ case OMAP_DSS_VIDEO3:
+ return 0x008C;
default:
BUG();
}
@@ -421,6 +441,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0018;
+ case OMAP_DSS_VIDEO3:
+ return 0x0088;
default:
BUG();
}
@@ -434,6 +456,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x001C;
+ case OMAP_DSS_VIDEO3:
+ return 0x00A4;
default:
BUG();
}
@@ -447,6 +471,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0020;
+ case OMAP_DSS_VIDEO3:
+ return 0x0098;
default:
BUG();
}
@@ -459,6 +485,7 @@
return 0x0034;
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
+ case OMAP_DSS_VIDEO3:
BUG();
default:
BUG();
@@ -472,6 +499,7 @@
return 0x0038;
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
+ case OMAP_DSS_VIDEO3:
BUG();
default:
BUG();
@@ -486,6 +514,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0024;
+ case OMAP_DSS_VIDEO3:
+ return 0x0090;
default:
BUG();
}
@@ -500,6 +530,8 @@
return 0x0580;
case OMAP_DSS_VIDEO2:
return 0x055C;
+ case OMAP_DSS_VIDEO3:
+ return 0x0424;
default:
BUG();
}
@@ -513,6 +545,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0028;
+ case OMAP_DSS_VIDEO3:
+ return 0x0094;
default:
BUG();
}
@@ -527,6 +561,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x002C;
+ case OMAP_DSS_VIDEO3:
+ return 0x0000;
default:
BUG();
}
@@ -541,6 +577,8 @@
return 0x0584;
case OMAP_DSS_VIDEO2:
return 0x0560;
+ case OMAP_DSS_VIDEO3:
+ return 0x0428;
default:
BUG();
}
@@ -554,6 +592,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0030;
+ case OMAP_DSS_VIDEO3:
+ return 0x0004;
default:
BUG();
}
@@ -568,6 +608,8 @@
return 0x0588;
case OMAP_DSS_VIDEO2:
return 0x0564;
+ case OMAP_DSS_VIDEO3:
+ return 0x042C;
default:
BUG();
}
@@ -582,6 +624,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0034 + i * 0x8;
+ case OMAP_DSS_VIDEO3:
+ return 0x0010 + i * 0x8;
default:
BUG();
}
@@ -597,6 +641,8 @@
return 0x058C + i * 0x8;
case OMAP_DSS_VIDEO2:
return 0x0568 + i * 0x8;
+ case OMAP_DSS_VIDEO3:
+ return 0x0430 + i * 0x8;
default:
BUG();
}
@@ -611,6 +657,8 @@
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
return 0x0038 + i * 0x8;
+ case OMAP_DSS_VIDEO3:
+ return 0x0014 + i * 0x8;
default:
BUG();
}
@@ -626,6 +674,8 @@
return 0x0590 + i * 8;
case OMAP_DSS_VIDEO2:
return 0x056C + i * 0x8;
+ case OMAP_DSS_VIDEO3:
+ return 0x0434 + i * 0x8;
default:
BUG();
}
@@ -639,6 +689,7 @@
BUG();
case OMAP_DSS_VIDEO1:
case OMAP_DSS_VIDEO2:
+ case OMAP_DSS_VIDEO3:
return 0x0074 + i * 0x4;
default:
BUG();
@@ -655,6 +706,8 @@
return 0x0124 + i * 0x4;
case OMAP_DSS_VIDEO2:
return 0x00B4 + i * 0x4;
+ case OMAP_DSS_VIDEO3:
+ return 0x0050 + i * 0x4;
default:
BUG();
}
@@ -670,6 +723,8 @@
return 0x05CC + i * 0x4;
case OMAP_DSS_VIDEO2:
return 0x05A8 + i * 0x4;
+ case OMAP_DSS_VIDEO3:
+ return 0x0470 + i * 0x4;
default:
BUG();
}
@@ -684,6 +739,8 @@
return 0x0174;
case OMAP_DSS_VIDEO2:
return 0x00E8;
+ case OMAP_DSS_VIDEO3:
+ return 0x00A0;
default:
BUG();
}
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 94495e4..be331dc 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -45,14 +45,13 @@
const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
- int r, enabled;
+ int r;
+ bool enabled;
- r = kstrtoint(buf, 0, &enabled);
+ r = strtobool(buf, &enabled);
if (r)
return r;
- enabled = !!enabled;
-
if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) {
if (enabled) {
r = dssdev->driver->enable(dssdev);
@@ -79,17 +78,16 @@
struct device_attribute *attr, const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
- int te, r;
+ int r;
+ bool te;
if (!dssdev->driver->enable_te || !dssdev->driver->get_te)
return -ENOENT;
- r = kstrtoint(buf, 0, &te);
+ r = strtobool(buf, &te);
if (r)
return r;
- te = !!te;
-
r = dssdev->driver->enable_te(dssdev, te);
if (r)
return r;
@@ -195,17 +193,16 @@
struct device_attribute *attr, const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
- int mirror, r;
+ int r;
+ bool mirror;
if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
return -ENOENT;
- r = kstrtoint(buf, 0, &mirror);
+ r = strtobool(buf, &mirror);
if (r)
return r;
- mirror = !!mirror;
-
r = dssdev->driver->set_mirror(dssdev, mirror);
if (r)
return r;
@@ -302,11 +299,15 @@
return 16;
case OMAP_DISPLAY_TYPE_DBI:
- case OMAP_DISPLAY_TYPE_DSI:
if (dssdev->ctrl.pixel_size == 24)
return 24;
else
return 16;
+ case OMAP_DISPLAY_TYPE_DSI:
+ if (dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) > 16)
+ return 24;
+ else
+ return 16;
case OMAP_DISPLAY_TYPE_VENC:
case OMAP_DISPLAY_TYPE_SDI:
case OMAP_DISPLAY_TYPE_HDMI:
@@ -342,9 +343,11 @@
bpp = 24;
break;
case OMAP_DISPLAY_TYPE_DBI:
- case OMAP_DISPLAY_TYPE_DSI:
bpp = dssdev->ctrl.pixel_size;
break;
+ case OMAP_DISPLAY_TYPE_DSI:
+ bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+ break;
default:
BUG();
}
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index f053b18..483888a 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -82,9 +82,11 @@
dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
- r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
+ r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ if (r) {
+ dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
return r;
+ }
*fck = dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
*lck_div = dispc_cinfo.lck_div;
@@ -109,7 +111,7 @@
if (r)
return r;
- r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r)
return r;
@@ -129,7 +131,7 @@
bool is_tft;
int r = 0;
- dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
+ dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acbi, dssdev->panel.acb);
is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
@@ -153,7 +155,7 @@
t->pixel_clock = pck;
}
- dispc_set_lcd_timings(dssdev->manager->id, t);
+ dispc_mgr_set_lcd_timings(dssdev->manager->id, t);
return 0;
}
@@ -164,11 +166,12 @@
is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
- dispc_set_parallel_interface_mode(dssdev->manager->id,
- OMAP_DSS_PARALLELMODE_BYPASS);
- dispc_set_lcd_display_type(dssdev->manager->id, is_tft ?
+ dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_BYPASS);
+ dispc_mgr_enable_stallmode(dssdev->manager->id, false);
+
+ dispc_mgr_set_lcd_display_type(dssdev->manager->id, is_tft ?
OMAP_DSS_LCD_DISPLAY_TFT : OMAP_DSS_LCD_DISPLAY_STN);
- dispc_set_tft_data_lines(dssdev->manager->id,
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id,
dssdev->phy.dpi.data_lines);
}
@@ -176,6 +179,11 @@
{
int r;
+ if (dssdev->manager == NULL) {
+ DSSERR("failed to enable display: no manager\n");
+ return -ENODEV;
+ }
+
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
@@ -277,7 +285,7 @@
}
dpi_set_mode(dssdev);
- dispc_go(dssdev->manager->id);
+ dispc_mgr_go(dssdev->manager->id);
dispc_runtime_put();
dss_runtime_put();
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 7adbbeb..43c04a9 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -39,6 +39,7 @@
#include <linux/pm_runtime.h>
#include <video/omapdss.h>
+#include <video/mipi_display.h>
#include <plat/clock.h>
#include "dss.h"
@@ -131,7 +132,7 @@
#define DSI_IRQ_TA_TIMEOUT (1 << 20)
#define DSI_IRQ_ERROR_MASK \
(DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \
- DSI_IRQ_TA_TIMEOUT)
+ DSI_IRQ_TA_TIMEOUT | DSI_IRQ_SYNC_LOST)
#define DSI_IRQ_CHANNEL_MASK 0xf
/* Virtual channel interrupts */
@@ -198,18 +199,6 @@
DSI_CIO_IRQ_ERRCONTENTIONLP0_4 | DSI_CIO_IRQ_ERRCONTENTIONLP1_4 | \
DSI_CIO_IRQ_ERRCONTENTIONLP0_5 | DSI_CIO_IRQ_ERRCONTENTIONLP1_5)
-#define DSI_DT_DCS_SHORT_WRITE_0 0x05
-#define DSI_DT_DCS_SHORT_WRITE_1 0x15
-#define DSI_DT_DCS_READ 0x06
-#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37
-#define DSI_DT_NULL_PACKET 0x09
-#define DSI_DT_DCS_LONG_WRITE 0x39
-
-#define DSI_DT_RX_ACK_WITH_ERR 0x02
-#define DSI_DT_RX_DCS_LONG_READ 0x1c
-#define DSI_DT_RX_SHORT_READ_1 0x21
-#define DSI_DT_RX_SHORT_READ_2 0x22
-
typedef void (*omap_dsi_isr_t) (void *arg, u32 mask);
#define DSI_MAX_NR_ISRS 2
@@ -228,9 +217,9 @@
DSI_FIFO_SIZE_128 = 4,
};
-enum dsi_vc_mode {
- DSI_VC_MODE_L4 = 0,
- DSI_VC_MODE_VP,
+enum dsi_vc_source {
+ DSI_VC_SOURCE_L4 = 0,
+ DSI_VC_SOURCE_VP,
};
enum dsi_lane {
@@ -274,7 +263,8 @@
struct clk *dss_clk;
struct clk *sys_clk;
- void (*dsi_mux_pads)(bool enable);
+ int (*enable_pads)(int dsi_id, unsigned lane_mask);
+ void (*disable_pads)(int dsi_id, unsigned lane_mask);
struct dsi_clock_info current_cinfo;
@@ -282,7 +272,7 @@
struct regulator *vdds_dsi_reg;
struct {
- enum dsi_vc_mode mode;
+ enum dsi_vc_source source;
struct omap_dss_device *dssdev;
enum fifo_size fifo_size;
int vc_id;
@@ -368,14 +358,9 @@
return dsi_pdev_map[module];
}
-static int dsi_get_dsidev_id(struct platform_device *dsidev)
+static inline int dsi_get_dsidev_id(struct platform_device *dsidev)
{
- /* TEMP: Pass 0 as the dsi module index till the time the dsi platform
- * device names aren't changed to the form "omapdss_dsi.0",
- * "omapdss_dsi.1" and so on */
- BUG_ON(dsidev->id != -1);
-
- return 0;
+ return dsidev->id;
}
static inline void dsi_write_reg(struct platform_device *dsidev,
@@ -437,6 +422,21 @@
return value;
}
+u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt)
+{
+ switch (fmt) {
+ case OMAP_DSS_DSI_FMT_RGB888:
+ case OMAP_DSS_DSI_FMT_RGB666:
+ return 24;
+ case OMAP_DSS_DSI_FMT_RGB666_PACKED:
+ return 18;
+ case OMAP_DSS_DSI_FMT_RGB565:
+ return 16;
+ default:
+ BUG();
+ }
+}
+
#ifdef DEBUG
static void dsi_perf_mark_setup(struct platform_device *dsidev)
{
@@ -453,6 +453,7 @@
static void dsi_perf_show(struct platform_device *dsidev, const char *name)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ struct omap_dss_device *dssdev = dsi->update_region.device;
ktime_t t, setup_time, trans_time;
u32 total_bytes;
u32 setup_us, trans_us, total_us;
@@ -476,7 +477,7 @@
total_bytes = dsi->update_region.w *
dsi->update_region.h *
- dsi->update_region.device->ctrl.pixel_size / 8;
+ dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8;
printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
"%u bytes, %u kbytes/sec\n",
@@ -1287,7 +1288,7 @@
* with DSS_SYS_CLK source also */
cinfo->highfreq = 0;
} else {
- cinfo->clkin = dispc_pclk_rate(dssdev->manager->id);
+ cinfo->clkin = dispc_mgr_pclk_rate(dssdev->manager->id);
if (cinfo->clkin < 32000000)
cinfo->highfreq = 0;
@@ -2360,6 +2361,24 @@
return 0;
}
+static unsigned dsi_get_lane_mask(struct omap_dss_device *dssdev)
+{
+ unsigned lanes = 0;
+
+ if (dssdev->phy.dsi.clk_lane != 0)
+ lanes |= 1 << (dssdev->phy.dsi.clk_lane - 1);
+ if (dssdev->phy.dsi.data1_lane != 0)
+ lanes |= 1 << (dssdev->phy.dsi.data1_lane - 1);
+ if (dssdev->phy.dsi.data2_lane != 0)
+ lanes |= 1 << (dssdev->phy.dsi.data2_lane - 1);
+ if (dssdev->phy.dsi.data3_lane != 0)
+ lanes |= 1 << (dssdev->phy.dsi.data3_lane - 1);
+ if (dssdev->phy.dsi.data4_lane != 0)
+ lanes |= 1 << (dssdev->phy.dsi.data4_lane - 1);
+
+ return lanes;
+}
+
static int dsi_cio_init(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -2370,8 +2389,9 @@
DSSDBGF();
- if (dsi->dsi_mux_pads)
- dsi->dsi_mux_pads(true);
+ r = dsi->enable_pads(dsidev->id, dsi_get_lane_mask(dssdev));
+ if (r)
+ return r;
dsi_enable_scp_clk(dsidev);
@@ -2452,6 +2472,12 @@
dsi_cio_timings(dsidev);
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+ /* DDR_CLK_ALWAYS_ON */
+ REG_FLD_MOD(dsidev, DSI_CLK_CTRL,
+ dssdev->panel.dsi_vm_data.ddr_clk_always_on, 13, 13);
+ }
+
dsi->ulps_enabled = false;
DSSDBG("CIO init done\n");
@@ -2467,19 +2493,21 @@
dsi_cio_disable_lane_override(dsidev);
err_scp_clk_dom:
dsi_disable_scp_clk(dsidev);
- if (dsi->dsi_mux_pads)
- dsi->dsi_mux_pads(false);
+ dsi->disable_pads(dsidev->id, dsi_get_lane_mask(dssdev));
return r;
}
-static void dsi_cio_uninit(struct platform_device *dsidev)
+static void dsi_cio_uninit(struct omap_dss_device *dssdev)
{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ /* DDR_CLK_ALWAYS_ON */
+ REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 0, 13, 13);
+
dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_OFF);
dsi_disable_scp_clk(dsidev);
- if (dsi->dsi_mux_pads)
- dsi->dsi_mux_pads(false);
+ dsi->disable_pads(dsidev->id, dsi_get_lane_mask(dssdev));
}
static void dsi_config_tx_fifo(struct platform_device *dsidev,
@@ -2669,10 +2697,10 @@
if (!dsi_vc_is_enabled(dsidev, channel))
return 0;
- switch (dsi->vc[channel].mode) {
- case DSI_VC_MODE_VP:
+ switch (dsi->vc[channel].source) {
+ case DSI_VC_SOURCE_VP:
return dsi_sync_vc_vp(dsidev, channel);
- case DSI_VC_MODE_L4:
+ case DSI_VC_SOURCE_L4:
return dsi_sync_vc_l4(dsidev, channel);
default:
BUG();
@@ -2726,43 +2754,12 @@
dsi_write_reg(dsidev, DSI_VC_CTRL(channel), r);
}
-static int dsi_vc_config_l4(struct platform_device *dsidev, int channel)
+static int dsi_vc_config_source(struct platform_device *dsidev, int channel,
+ enum dsi_vc_source source)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- if (dsi->vc[channel].mode == DSI_VC_MODE_L4)
- return 0;
-
- DSSDBGF("%d", channel);
-
- dsi_sync_vc(dsidev, channel);
-
- dsi_vc_enable(dsidev, channel, 0);
-
- /* VC_BUSY */
- if (wait_for_bit_change(dsidev, DSI_VC_CTRL(channel), 15, 0) != 0) {
- DSSERR("vc(%d) busy when trying to config for L4\n", channel);
- return -EIO;
- }
-
- REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
-
- /* DCS_CMD_ENABLE */
- if (dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC))
- REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 0, 30, 30);
-
- dsi_vc_enable(dsidev, channel, 1);
-
- dsi->vc[channel].mode = DSI_VC_MODE_L4;
-
- return 0;
-}
-
-static int dsi_vc_config_vp(struct platform_device *dsidev, int channel)
-{
- struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-
- if (dsi->vc[channel].mode == DSI_VC_MODE_VP)
+ if (dsi->vc[channel].source == source)
return 0;
DSSDBGF("%d", channel);
@@ -2777,21 +2774,22 @@
return -EIO;
}
- /* SOURCE, 1 = video port */
- REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 1, 1);
+ /* SOURCE, 0 = L4, 1 = video port */
+ REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), source, 1, 1);
/* DCS_CMD_ENABLE */
- if (dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC))
- REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 30, 30);
+ if (dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC)) {
+ bool enable = source == DSI_VC_SOURCE_VP;
+ REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), enable, 30, 30);
+ }
dsi_vc_enable(dsidev, channel, 1);
- dsi->vc[channel].mode = DSI_VC_MODE_VP;
+ dsi->vc[channel].source = source;
return 0;
}
-
void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
bool enable)
{
@@ -2810,6 +2808,10 @@
dsi_if_enable(dsidev, 1);
dsi_force_tx_stop_mode_io(dsidev);
+
+ /* start the DDR clock by sending a NULL packet */
+ if (dssdev->panel.dsi_vm_data.ddr_clk_always_on && enable)
+ dsi_vc_send_null(dssdev, channel);
}
EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs);
@@ -2873,16 +2875,16 @@
val = dsi_read_reg(dsidev, DSI_VC_SHORT_PACKET_HEADER(channel));
DSSERR("\trawval %#08x\n", val);
dt = FLD_GET(val, 5, 0);
- if (dt == DSI_DT_RX_ACK_WITH_ERR) {
+ if (dt == MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
- } else if (dt == DSI_DT_RX_SHORT_READ_1) {
+ } else if (dt == MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE) {
DSSERR("\tDCS short response, 1 byte: %#x\n",
FLD_GET(val, 23, 8));
- } else if (dt == DSI_DT_RX_SHORT_READ_2) {
+ } else if (dt == MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE) {
DSSERR("\tDCS short response, 2 byte: %#x\n",
FLD_GET(val, 23, 8));
- } else if (dt == DSI_DT_RX_DCS_LONG_READ) {
+ } else if (dt == MIPI_DSI_RX_DCS_LONG_READ_RESPONSE) {
DSSERR("\tDCS long response, len %d\n",
FLD_GET(val, 23, 8));
dsi_vc_flush_long_data(dsidev, channel);
@@ -3007,7 +3009,7 @@
return -EINVAL;
}
- dsi_vc_config_l4(dsidev, channel);
+ dsi_vc_config_source(dsidev, channel, DSI_VC_SOURCE_L4);
dsi_vc_write_long_header(dsidev, channel, data_type, len, ecc);
@@ -3066,7 +3068,7 @@
channel,
data_type, data & 0xff, (data >> 8) & 0xff);
- dsi_vc_config_l4(dsidev, channel);
+ dsi_vc_config_source(dsidev, channel, DSI_VC_SOURCE_L4);
if (FLD_GET(dsi_read_reg(dsidev, DSI_VC_CTRL(channel)), 16, 16)) {
DSSERR("ERROR FIFO FULL, aborting transfer\n");
@@ -3085,44 +3087,66 @@
int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
- u8 nullpkg[] = {0, 0, 0, 0};
- return dsi_vc_send_long(dsidev, channel, DSI_DT_NULL_PACKET, nullpkg,
- 4, 0);
+ return dsi_vc_send_long(dsidev, channel, MIPI_DSI_NULL_PACKET, NULL,
+ 0, 0);
}
EXPORT_SYMBOL(dsi_vc_send_null);
-int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
- u8 *data, int len)
+static int dsi_vc_write_nosync_common(struct omap_dss_device *dssdev,
+ int channel, u8 *data, int len, enum dss_dsi_content_type type)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
int r;
- BUG_ON(len == 0);
-
- if (len == 1) {
- r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_SHORT_WRITE_0,
- data[0], 0);
+ if (len == 0) {
+ BUG_ON(type == DSS_DSI_CONTENT_DCS);
+ r = dsi_vc_send_short(dsidev, channel,
+ MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM, 0, 0);
+ } else if (len == 1) {
+ r = dsi_vc_send_short(dsidev, channel,
+ type == DSS_DSI_CONTENT_GENERIC ?
+ MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM :
+ MIPI_DSI_DCS_SHORT_WRITE, data[0], 0);
} else if (len == 2) {
- r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_SHORT_WRITE_1,
+ r = dsi_vc_send_short(dsidev, channel,
+ type == DSS_DSI_CONTENT_GENERIC ?
+ MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM :
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM,
data[0] | (data[1] << 8), 0);
} else {
- /* 0x39 = DCS Long Write */
- r = dsi_vc_send_long(dsidev, channel, DSI_DT_DCS_LONG_WRITE,
- data, len, 0);
+ r = dsi_vc_send_long(dsidev, channel,
+ type == DSS_DSI_CONTENT_GENERIC ?
+ MIPI_DSI_GENERIC_LONG_WRITE :
+ MIPI_DSI_DCS_LONG_WRITE, data, len, 0);
}
return r;
}
+
+int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len)
+{
+ return dsi_vc_write_nosync_common(dssdev, channel, data, len,
+ DSS_DSI_CONTENT_DCS);
+}
EXPORT_SYMBOL(dsi_vc_dcs_write_nosync);
-int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
- int len)
+int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len)
+{
+ return dsi_vc_write_nosync_common(dssdev, channel, data, len,
+ DSS_DSI_CONTENT_GENERIC);
+}
+EXPORT_SYMBOL(dsi_vc_generic_write_nosync);
+
+static int dsi_vc_write_common(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len, enum dss_dsi_content_type type)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
int r;
- r = dsi_vc_dcs_write_nosync(dssdev, channel, data, len);
+ r = dsi_vc_write_nosync_common(dssdev, channel, data, len, type);
if (r)
goto err;
@@ -3140,18 +3164,39 @@
return 0;
err:
- DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n",
+ DSSERR("dsi_vc_write_common(ch %d, cmd 0x%02x, len %d) failed\n",
channel, data[0], len);
return r;
}
+
+int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
+ int len)
+{
+ return dsi_vc_write_common(dssdev, channel, data, len,
+ DSS_DSI_CONTENT_DCS);
+}
EXPORT_SYMBOL(dsi_vc_dcs_write);
+int dsi_vc_generic_write(struct omap_dss_device *dssdev, int channel, u8 *data,
+ int len)
+{
+ return dsi_vc_write_common(dssdev, channel, data, len,
+ DSS_DSI_CONTENT_GENERIC);
+}
+EXPORT_SYMBOL(dsi_vc_generic_write);
+
int dsi_vc_dcs_write_0(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd)
{
return dsi_vc_dcs_write(dssdev, channel, &dcs_cmd, 1);
}
EXPORT_SYMBOL(dsi_vc_dcs_write_0);
+int dsi_vc_generic_write_0(struct omap_dss_device *dssdev, int channel)
+{
+ return dsi_vc_generic_write(dssdev, channel, NULL, 0);
+}
+EXPORT_SYMBOL(dsi_vc_generic_write_0);
+
int dsi_vc_dcs_write_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 param)
{
@@ -3162,26 +3207,88 @@
}
EXPORT_SYMBOL(dsi_vc_dcs_write_1);
-int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
- u8 *buf, int buflen)
+int dsi_vc_generic_write_1(struct omap_dss_device *dssdev, int channel,
+ u8 param)
+{
+ return dsi_vc_generic_write(dssdev, channel, ¶m, 1);
+}
+EXPORT_SYMBOL(dsi_vc_generic_write_1);
+
+int dsi_vc_generic_write_2(struct omap_dss_device *dssdev, int channel,
+ u8 param1, u8 param2)
+{
+ u8 buf[2];
+ buf[0] = param1;
+ buf[1] = param2;
+ return dsi_vc_generic_write(dssdev, channel, buf, 2);
+}
+EXPORT_SYMBOL(dsi_vc_generic_write_2);
+
+static int dsi_vc_dcs_send_read_request(struct omap_dss_device *dssdev,
+ int channel, u8 dcs_cmd)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ int r;
+
+ if (dsi->debug_read)
+ DSSDBG("dsi_vc_dcs_send_read_request(ch%d, dcs_cmd %x)\n",
+ channel, dcs_cmd);
+
+ r = dsi_vc_send_short(dsidev, channel, MIPI_DSI_DCS_READ, dcs_cmd, 0);
+ if (r) {
+ DSSERR("dsi_vc_dcs_send_read_request(ch %d, cmd 0x%02x)"
+ " failed\n", channel, dcs_cmd);
+ return r;
+ }
+
+ return 0;
+}
+
+static int dsi_vc_generic_send_read_request(struct omap_dss_device *dssdev,
+ int channel, u8 *reqdata, int reqlen)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ u16 data;
+ u8 data_type;
+ int r;
+
+ if (dsi->debug_read)
+ DSSDBG("dsi_vc_generic_send_read_request(ch %d, reqlen %d)\n",
+ channel, reqlen);
+
+ if (reqlen == 0) {
+ data_type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
+ data = 0;
+ } else if (reqlen == 1) {
+ data_type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
+ data = reqdata[0];
+ } else if (reqlen == 2) {
+ data_type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
+ data = reqdata[0] | (reqdata[1] << 8);
+ } else {
+ BUG();
+ }
+
+ r = dsi_vc_send_short(dsidev, channel, data_type, data, 0);
+ if (r) {
+ DSSERR("dsi_vc_generic_send_read_request(ch %d, reqlen %d)"
+ " failed\n", channel, reqlen);
+ return r;
+ }
+
+ return 0;
+}
+
+static int dsi_vc_read_rx_fifo(struct platform_device *dsidev, int channel,
+ u8 *buf, int buflen, enum dss_dsi_content_type type)
+{
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 val;
u8 dt;
int r;
- if (dsi->debug_read)
- DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd);
-
- r = dsi_vc_send_short(dsidev, channel, DSI_DT_DCS_READ, dcs_cmd, 0);
- if (r)
- goto err;
-
- r = dsi_vc_send_bta_sync(dssdev, channel);
- if (r)
- goto err;
-
/* RX_FIFO_NOT_EMPTY */
if (REG_GET(dsidev, DSI_VC_CTRL(channel), 20, 20) == 0) {
DSSERR("RX fifo empty when trying to read.\n");
@@ -3193,16 +3300,20 @@
if (dsi->debug_read)
DSSDBG("\theader: %08x\n", val);
dt = FLD_GET(val, 5, 0);
- if (dt == DSI_DT_RX_ACK_WITH_ERR) {
+ if (dt == MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
r = -EIO;
goto err;
- } else if (dt == DSI_DT_RX_SHORT_READ_1) {
+ } else if (dt == (type == DSS_DSI_CONTENT_GENERIC ?
+ MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE :
+ MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE)) {
u8 data = FLD_GET(val, 15, 8);
if (dsi->debug_read)
- DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
+ DSSDBG("\t%s short response, 1 byte: %02x\n",
+ type == DSS_DSI_CONTENT_GENERIC ? "GENERIC" :
+ "DCS", data);
if (buflen < 1) {
r = -EIO;
@@ -3212,10 +3323,14 @@
buf[0] = data;
return 1;
- } else if (dt == DSI_DT_RX_SHORT_READ_2) {
+ } else if (dt == (type == DSS_DSI_CONTENT_GENERIC ?
+ MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE :
+ MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE)) {
u16 data = FLD_GET(val, 23, 8);
if (dsi->debug_read)
- DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
+ DSSDBG("\t%s short response, 2 byte: %04x\n",
+ type == DSS_DSI_CONTENT_GENERIC ? "GENERIC" :
+ "DCS", data);
if (buflen < 2) {
r = -EIO;
@@ -3226,11 +3341,15 @@
buf[1] = (data >> 8) & 0xff;
return 2;
- } else if (dt == DSI_DT_RX_DCS_LONG_READ) {
+ } else if (dt == (type == DSS_DSI_CONTENT_GENERIC ?
+ MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE :
+ MIPI_DSI_RX_DCS_LONG_READ_RESPONSE)) {
int w;
int len = FLD_GET(val, 23, 8);
if (dsi->debug_read)
- DSSDBG("\tDCS long response, len %d\n", len);
+ DSSDBG("\t%s long response, len %d\n",
+ type == DSS_DSI_CONTENT_GENERIC ? "GENERIC" :
+ "DCS", len);
if (len > buflen) {
r = -EIO;
@@ -3266,58 +3385,126 @@
BUG();
err:
- DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n",
- channel, dcs_cmd);
- return r;
+ DSSERR("dsi_vc_read_rx_fifo(ch %d type %s) failed\n", channel,
+ type == DSS_DSI_CONTENT_GENERIC ? "GENERIC" : "DCS");
+ return r;
+}
+
+int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
+ u8 *buf, int buflen)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ int r;
+
+ r = dsi_vc_dcs_send_read_request(dssdev, channel, dcs_cmd);
+ if (r)
+ goto err;
+
+ r = dsi_vc_send_bta_sync(dssdev, channel);
+ if (r)
+ goto err;
+
+ r = dsi_vc_read_rx_fifo(dsidev, channel, buf, buflen,
+ DSS_DSI_CONTENT_DCS);
+ if (r < 0)
+ goto err;
+
+ if (r != buflen) {
+ r = -EIO;
+ goto err;
+ }
+
+ return 0;
+err:
+ DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n", channel, dcs_cmd);
+ return r;
}
EXPORT_SYMBOL(dsi_vc_dcs_read);
-int dsi_vc_dcs_read_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
- u8 *data)
+static int dsi_vc_generic_read(struct omap_dss_device *dssdev, int channel,
+ u8 *reqdata, int reqlen, u8 *buf, int buflen)
{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
int r;
- r = dsi_vc_dcs_read(dssdev, channel, dcs_cmd, data, 1);
+ r = dsi_vc_generic_send_read_request(dssdev, channel, reqdata, reqlen);
+ if (r)
+ return r;
+ r = dsi_vc_send_bta_sync(dssdev, channel);
+ if (r)
+ return r;
+
+ r = dsi_vc_read_rx_fifo(dsidev, channel, buf, buflen,
+ DSS_DSI_CONTENT_GENERIC);
if (r < 0)
return r;
- if (r != 1)
- return -EIO;
+ if (r != buflen) {
+ r = -EIO;
+ return r;
+ }
return 0;
}
-EXPORT_SYMBOL(dsi_vc_dcs_read_1);
-int dsi_vc_dcs_read_2(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
- u8 *data1, u8 *data2)
+int dsi_vc_generic_read_0(struct omap_dss_device *dssdev, int channel, u8 *buf,
+ int buflen)
{
- u8 buf[2];
int r;
- r = dsi_vc_dcs_read(dssdev, channel, dcs_cmd, buf, 2);
-
- if (r < 0)
+ r = dsi_vc_generic_read(dssdev, channel, NULL, 0, buf, buflen);
+ if (r) {
+ DSSERR("dsi_vc_generic_read_0(ch %d) failed\n", channel);
return r;
-
- if (r != 2)
- return -EIO;
-
- *data1 = buf[0];
- *data2 = buf[1];
+ }
return 0;
}
-EXPORT_SYMBOL(dsi_vc_dcs_read_2);
+EXPORT_SYMBOL(dsi_vc_generic_read_0);
+
+int dsi_vc_generic_read_1(struct omap_dss_device *dssdev, int channel, u8 param,
+ u8 *buf, int buflen)
+{
+ int r;
+
+ r = dsi_vc_generic_read(dssdev, channel, ¶m, 1, buf, buflen);
+ if (r) {
+ DSSERR("dsi_vc_generic_read_1(ch %d) failed\n", channel);
+ return r;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(dsi_vc_generic_read_1);
+
+int dsi_vc_generic_read_2(struct omap_dss_device *dssdev, int channel,
+ u8 param1, u8 param2, u8 *buf, int buflen)
+{
+ int r;
+ u8 reqdata[2];
+
+ reqdata[0] = param1;
+ reqdata[1] = param2;
+
+ r = dsi_vc_generic_read(dssdev, channel, reqdata, 2, buf, buflen);
+ if (r) {
+ DSSERR("dsi_vc_generic_read_2(ch %d) failed\n", channel);
+ return r;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(dsi_vc_generic_read_2);
int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
u16 len)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
- return dsi_vc_send_short(dsidev, channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
- len, 0);
+ return dsi_vc_send_short(dsidev, channel,
+ MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, len, 0);
}
EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
@@ -3508,6 +3695,75 @@
ticks, x4 ? " x4" : "", x16 ? " x16" : "",
(total_ticks * 1000) / (fck / 1000 / 1000));
}
+
+static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ int num_line_buffers;
+
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+ int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+ unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
+ struct omap_video_timings *timings = &dssdev->panel.timings;
+ /*
+ * Don't use line buffers if width is greater than the video
+ * port's line buffer size
+ */
+ if (line_buf_size <= timings->x_res * bpp / 8)
+ num_line_buffers = 0;
+ else
+ num_line_buffers = 2;
+ } else {
+ /* Use maximum number of line buffers in command mode */
+ num_line_buffers = 2;
+ }
+
+ /* LINE_BUFFER */
+ REG_FLD_MOD(dsidev, DSI_CTRL, num_line_buffers, 13, 12);
+}
+
+static void dsi_config_vp_sync_events(struct omap_dss_device *dssdev)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ int de_pol = dssdev->panel.dsi_vm_data.vp_de_pol;
+ int hsync_pol = dssdev->panel.dsi_vm_data.vp_hsync_pol;
+ int vsync_pol = dssdev->panel.dsi_vm_data.vp_vsync_pol;
+ bool vsync_end = dssdev->panel.dsi_vm_data.vp_vsync_end;
+ bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
+ u32 r;
+
+ r = dsi_read_reg(dsidev, DSI_CTRL);
+ r = FLD_MOD(r, de_pol, 9, 9); /* VP_DE_POL */
+ r = FLD_MOD(r, hsync_pol, 10, 10); /* VP_HSYNC_POL */
+ r = FLD_MOD(r, vsync_pol, 11, 11); /* VP_VSYNC_POL */
+ r = FLD_MOD(r, 1, 15, 15); /* VP_VSYNC_START */
+ r = FLD_MOD(r, vsync_end, 16, 16); /* VP_VSYNC_END */
+ r = FLD_MOD(r, 1, 17, 17); /* VP_HSYNC_START */
+ r = FLD_MOD(r, hsync_end, 18, 18); /* VP_HSYNC_END */
+ dsi_write_reg(dsidev, DSI_CTRL, r);
+}
+
+static void dsi_config_blanking_modes(struct omap_dss_device *dssdev)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ int blanking_mode = dssdev->panel.dsi_vm_data.blanking_mode;
+ int hfp_blanking_mode = dssdev->panel.dsi_vm_data.hfp_blanking_mode;
+ int hbp_blanking_mode = dssdev->panel.dsi_vm_data.hbp_blanking_mode;
+ int hsa_blanking_mode = dssdev->panel.dsi_vm_data.hsa_blanking_mode;
+ u32 r;
+
+ /*
+ * 0 = TX FIFO packets sent or LPS in corresponding blanking periods
+ * 1 = Long blanking packets are sent in corresponding blanking periods
+ */
+ r = dsi_read_reg(dsidev, DSI_CTRL);
+ r = FLD_MOD(r, blanking_mode, 20, 20); /* BLANKING_MODE */
+ r = FLD_MOD(r, hfp_blanking_mode, 21, 21); /* HFP_BLANKING */
+ r = FLD_MOD(r, hbp_blanking_mode, 22, 22); /* HBP_BLANKING */
+ r = FLD_MOD(r, hsa_blanking_mode, 23, 23); /* HSA_BLANKING */
+ dsi_write_reg(dsidev, DSI_CTRL, r);
+}
+
static int dsi_proto_config(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -3530,7 +3786,7 @@
dsi_set_lp_rx_timeout(dsidev, 0x1fff, true, true);
dsi_set_hs_tx_timeout(dsidev, 0x1fff, true, true);
- switch (dssdev->ctrl.pixel_size) {
+ switch (dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt)) {
case 16:
buswidth = 0;
break;
@@ -3551,7 +3807,6 @@
r = FLD_MOD(r, 1, 4, 4); /* VP_CLK_RATIO, always 1, see errata*/
r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */
r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */
- r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */
r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */
r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */
if (!dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC)) {
@@ -3562,6 +3817,13 @@
dsi_write_reg(dsidev, DSI_CTRL, r);
+ dsi_config_vp_num_line_buffers(dssdev);
+
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+ dsi_config_vp_sync_events(dssdev);
+ dsi_config_blanking_modes(dssdev);
+ }
+
dsi_vc_initial_config(dsidev, 0);
dsi_vc_initial_config(dsidev, 1);
dsi_vc_initial_config(dsidev, 2);
@@ -3580,6 +3842,7 @@
unsigned ddr_clk_pre, ddr_clk_post;
unsigned enter_hs_mode_lat, exit_hs_mode_lat;
unsigned ths_eot;
+ int ndl = dsi_get_num_data_lanes_dssdev(dssdev);
u32 r;
r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG0);
@@ -3602,7 +3865,7 @@
/* min 60ns + 52*UI */
tclk_post = ns2ddr(dsidev, 60) + 26;
- ths_eot = DIV_ROUND_UP(4, dsi_get_num_data_lanes_dssdev(dssdev));
+ ths_eot = DIV_ROUND_UP(4, ndl);
ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare,
4);
@@ -3632,162 +3895,114 @@
DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n",
enter_hs_mode_lat, exit_hs_mode_lat);
+
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+ /* TODO: Implement a video mode check_timings function */
+ int hsa = dssdev->panel.dsi_vm_data.hsa;
+ int hfp = dssdev->panel.dsi_vm_data.hfp;
+ int hbp = dssdev->panel.dsi_vm_data.hbp;
+ int vsa = dssdev->panel.dsi_vm_data.vsa;
+ int vfp = dssdev->panel.dsi_vm_data.vfp;
+ int vbp = dssdev->panel.dsi_vm_data.vbp;
+ int window_sync = dssdev->panel.dsi_vm_data.window_sync;
+ bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
+ struct omap_video_timings *timings = &dssdev->panel.timings;
+ int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+ int tl, t_he, width_bytes;
+
+ t_he = hsync_end ?
+ ((hsa == 0 && ndl == 3) ? 1 : DIV_ROUND_UP(4, ndl)) : 0;
+
+ width_bytes = DIV_ROUND_UP(timings->x_res * bpp, 8);
+
+ /* TL = t_HS + HSA + t_HE + HFP + ceil((WC + 6) / NDL) + HBP */
+ tl = DIV_ROUND_UP(4, ndl) + (hsync_end ? hsa : 0) + t_he + hfp +
+ DIV_ROUND_UP(width_bytes + 6, ndl) + hbp;
+
+ DSSDBG("HBP: %d, HFP: %d, HSA: %d, TL: %d TXBYTECLKHS\n", hbp,
+ hfp, hsync_end ? hsa : 0, tl);
+ DSSDBG("VBP: %d, VFP: %d, VSA: %d, VACT: %d lines\n", vbp, vfp,
+ vsa, timings->y_res);
+
+ r = dsi_read_reg(dsidev, DSI_VM_TIMING1);
+ r = FLD_MOD(r, hbp, 11, 0); /* HBP */
+ r = FLD_MOD(r, hfp, 23, 12); /* HFP */
+ r = FLD_MOD(r, hsync_end ? hsa : 0, 31, 24); /* HSA */
+ dsi_write_reg(dsidev, DSI_VM_TIMING1, r);
+
+ r = dsi_read_reg(dsidev, DSI_VM_TIMING2);
+ r = FLD_MOD(r, vbp, 7, 0); /* VBP */
+ r = FLD_MOD(r, vfp, 15, 8); /* VFP */
+ r = FLD_MOD(r, vsa, 23, 16); /* VSA */
+ r = FLD_MOD(r, window_sync, 27, 24); /* WINDOW_SYNC */
+ dsi_write_reg(dsidev, DSI_VM_TIMING2, r);
+
+ r = dsi_read_reg(dsidev, DSI_VM_TIMING3);
+ r = FLD_MOD(r, timings->y_res, 14, 0); /* VACT */
+ r = FLD_MOD(r, tl, 31, 16); /* TL */
+ dsi_write_reg(dsidev, DSI_VM_TIMING3, r);
+ }
}
-
-#define DSI_DECL_VARS \
- int __dsi_cb = 0; u32 __dsi_cv = 0;
-
-#define DSI_FLUSH(dsidev, ch) \
- if (__dsi_cb > 0) { \
- /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \
- dsi_write_reg(dsidev, DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \
- __dsi_cb = __dsi_cv = 0; \
- }
-
-#define DSI_PUSH(dsidev, ch, data) \
- do { \
- __dsi_cv |= (data) << (__dsi_cb * 8); \
- /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \
- if (++__dsi_cb > 3) \
- DSI_FLUSH(dsidev, ch); \
- } while (0)
-
-static int dsi_update_screen_l4(struct omap_dss_device *dssdev,
- int x, int y, int w, int h)
+int dsi_video_mode_enable(struct omap_dss_device *dssdev, int channel)
{
- /* Note: supports only 24bit colors in 32bit container */
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
- struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- int first = 1;
- int fifo_stalls = 0;
- int max_dsi_packet_size;
- int max_data_per_packet;
- int max_pixels_per_packet;
- int pixels_left;
- int bytespp = dssdev->ctrl.pixel_size / 8;
- int scr_width;
- u32 __iomem *data;
- int start_offset;
- int horiz_inc;
- int current_x;
- struct omap_overlay *ovl;
+ int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+ u8 data_type;
+ u16 word_count;
- debug_irq = 0;
+ switch (dssdev->panel.dsi_pix_fmt) {
+ case OMAP_DSS_DSI_FMT_RGB888:
+ data_type = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+ break;
+ case OMAP_DSS_DSI_FMT_RGB666:
+ data_type = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+ break;
+ case OMAP_DSS_DSI_FMT_RGB666_PACKED:
+ data_type = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+ break;
+ case OMAP_DSS_DSI_FMT_RGB565:
+ data_type = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+ break;
+ default:
+ BUG();
+ };
- DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n",
- x, y, w, h);
+ dsi_if_enable(dsidev, false);
+ dsi_vc_enable(dsidev, channel, false);
- ovl = dssdev->manager->overlays[0];
+ /* MODE, 1 = video mode */
+ REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 4, 4);
- if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U)
- return -EINVAL;
+ word_count = DIV_ROUND_UP(dssdev->panel.timings.x_res * bpp, 8);
- if (dssdev->ctrl.pixel_size != 24)
- return -EINVAL;
+ dsi_vc_write_long_header(dsidev, channel, data_type, word_count, 0);
- scr_width = ovl->info.screen_width;
- data = ovl->info.vaddr;
+ dsi_vc_enable(dsidev, channel, true);
+ dsi_if_enable(dsidev, true);
- start_offset = scr_width * y + x;
- horiz_inc = scr_width - w;
- current_x = x;
-
- /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes
- * in fifo */
-
- /* When using CPU, max long packet size is TX buffer size */
- max_dsi_packet_size = dsi->vc[0].fifo_size * 32 * 4;
-
- /* we seem to get better perf if we divide the tx fifo to half,
- and while the other half is being sent, we fill the other half
- max_dsi_packet_size /= 2; */
-
- max_data_per_packet = max_dsi_packet_size - 4 - 1;
-
- max_pixels_per_packet = max_data_per_packet / bytespp;
-
- DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet);
-
- pixels_left = w * h;
-
- DSSDBG("total pixels %d\n", pixels_left);
-
- data += start_offset;
-
- while (pixels_left > 0) {
- /* 0x2c = write_memory_start */
- /* 0x3c = write_memory_continue */
- u8 dcs_cmd = first ? 0x2c : 0x3c;
- int pixels;
- DSI_DECL_VARS;
- first = 0;
-
-#if 1
- /* using fifo not empty */
- /* TX_FIFO_NOT_EMPTY */
- while (FLD_GET(dsi_read_reg(dsidev, DSI_VC_CTRL(0)), 5, 5)) {
- fifo_stalls++;
- if (fifo_stalls > 0xfffff) {
- DSSERR("fifo stalls overflow, pixels left %d\n",
- pixels_left);
- dsi_if_enable(dsidev, 0);
- return -EIO;
- }
- udelay(1);
- }
-#elif 1
- /* using fifo emptiness */
- while ((REG_GET(dsidev, DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 <
- max_dsi_packet_size) {
- fifo_stalls++;
- if (fifo_stalls > 0xfffff) {
- DSSERR("fifo stalls overflow, pixels left %d\n",
- pixels_left);
- dsi_if_enable(dsidev, 0);
- return -EIO;
- }
- }
-#else
- while ((REG_GET(dsidev, DSI_TX_FIFO_VC_EMPTINESS,
- 7, 0) + 1) * 4 == 0) {
- fifo_stalls++;
- if (fifo_stalls > 0xfffff) {
- DSSERR("fifo stalls overflow, pixels left %d\n",
- pixels_left);
- dsi_if_enable(dsidev, 0);
- return -EIO;
- }
- }
-#endif
- pixels = min(max_pixels_per_packet, pixels_left);
-
- pixels_left -= pixels;
-
- dsi_vc_write_long_header(dsidev, 0, DSI_DT_DCS_LONG_WRITE,
- 1 + pixels * bytespp, 0);
-
- DSI_PUSH(dsidev, 0, dcs_cmd);
-
- while (pixels-- > 0) {
- u32 pix = __raw_readl(data++);
-
- DSI_PUSH(dsidev, 0, (pix >> 16) & 0xff);
- DSI_PUSH(dsidev, 0, (pix >> 8) & 0xff);
- DSI_PUSH(dsidev, 0, (pix >> 0) & 0xff);
-
- current_x++;
- if (current_x == x+w) {
- current_x = x;
- data += horiz_inc;
- }
- }
-
- DSI_FLUSH(dsidev, 0);
- }
+ dssdev->manager->enable(dssdev->manager);
return 0;
}
+EXPORT_SYMBOL(dsi_video_mode_enable);
+
+void dsi_video_mode_disable(struct omap_dss_device *dssdev, int channel)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+
+ dsi_if_enable(dsidev, false);
+ dsi_vc_enable(dsidev, channel, false);
+
+ /* MODE, 0 = command mode */
+ REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 0, 4, 4);
+
+ dsi_vc_enable(dsidev, channel, true);
+ dsi_if_enable(dsidev, true);
+
+ dssdev->manager->disable(dssdev->manager);
+}
+EXPORT_SYMBOL(dsi_video_mode_disable);
static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
@@ -3808,9 +4023,9 @@
DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
x, y, w, h);
- dsi_vc_config_vp(dsidev, channel);
+ dsi_vc_config_source(dsidev, channel, DSI_VC_SOURCE_VP);
- bytespp = dssdev->ctrl.pixel_size / 8;
+ bytespp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8;
bytespl = w * bytespp;
bytespf = bytespl * h;
@@ -3831,7 +4046,7 @@
l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
dsi_write_reg(dsidev, DSI_VC_TE(channel), l);
- dsi_vc_write_long_header(dsidev, channel, DSI_DT_DCS_LONG_WRITE,
+ dsi_vc_write_long_header(dsidev, channel, MIPI_DSI_DCS_LONG_WRITE,
packet_len, 0);
if (dsi->te_enabled)
@@ -3956,11 +4171,9 @@
dsi_perf_mark_setup(dsidev);
- if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- dss_setup_partial_planes(dssdev, x, y, w, h,
- enlarge_update_area);
- dispc_set_lcd_size(dssdev->manager->id, *w, *h);
- }
+ dss_setup_partial_planes(dssdev, x, y, w, h,
+ enlarge_update_area);
+ dispc_mgr_set_lcd_size(dssdev->manager->id, *w, *h);
return 0;
}
@@ -3982,27 +4195,16 @@
* see rather obscure HW error happening, as DSS halts. */
BUG_ON(x % 2 == 1);
- if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- dsi->framedone_callback = callback;
- dsi->framedone_data = data;
+ dsi->framedone_callback = callback;
+ dsi->framedone_data = data;
- dsi->update_region.x = x;
- dsi->update_region.y = y;
- dsi->update_region.w = w;
- dsi->update_region.h = h;
- dsi->update_region.device = dssdev;
+ dsi->update_region.x = x;
+ dsi->update_region.y = y;
+ dsi->update_region.w = w;
+ dsi->update_region.h = h;
+ dsi->update_region.device = dssdev;
- dsi_update_screen_dispc(dssdev, x, y, w, h);
- } else {
- int r;
-
- r = dsi_update_screen_l4(dssdev, x, y, w, h);
- if (r)
- return r;
-
- dsi_perf_show(dsidev, "L4");
- callback(0, data);
- }
+ dsi_update_screen_dispc(dssdev, x, y, w, h);
return 0;
}
@@ -4013,28 +4215,9 @@
static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
{
int r;
- u32 irq;
- irq = dssdev->manager->id == OMAP_DSS_CHANNEL_LCD ?
- DISPC_IRQ_FRAMEDONE : DISPC_IRQ_FRAMEDONE2;
-
- r = omap_dispc_register_isr(dsi_framedone_irq_callback, (void *) dssdev,
- irq);
- if (r) {
- DSSERR("can't get FRAMEDONE irq\n");
- return r;
- }
-
- dispc_set_lcd_display_type(dssdev->manager->id,
- OMAP_DSS_LCD_DISPLAY_TFT);
-
- dispc_set_parallel_interface_mode(dssdev->manager->id,
- OMAP_DSS_PARALLELMODE_DSI);
- dispc_enable_fifohandcheck(dssdev->manager->id, 1);
-
- dispc_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
-
- {
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
+ u32 irq;
struct omap_video_timings timings = {
.hsw = 1,
.hfp = 1,
@@ -4044,21 +4227,46 @@
.vbp = 0,
};
- dispc_set_lcd_timings(dssdev->manager->id, &timings);
+ irq = dssdev->manager->id == OMAP_DSS_CHANNEL_LCD ?
+ DISPC_IRQ_FRAMEDONE : DISPC_IRQ_FRAMEDONE2;
+
+ r = omap_dispc_register_isr(dsi_framedone_irq_callback,
+ (void *) dssdev, irq);
+ if (r) {
+ DSSERR("can't get FRAMEDONE irq\n");
+ return r;
+ }
+
+ dispc_mgr_enable_stallmode(dssdev->manager->id, true);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 1);
+
+ dispc_mgr_set_lcd_timings(dssdev->manager->id, &timings);
+ } else {
+ dispc_mgr_enable_stallmode(dssdev->manager->id, false);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 0);
+
+ dispc_mgr_set_lcd_timings(dssdev->manager->id,
+ &dssdev->panel.timings);
}
+ dispc_mgr_set_lcd_display_type(dssdev->manager->id,
+ OMAP_DSS_LCD_DISPLAY_TFT);
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id,
+ dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt));
return 0;
}
static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
{
- u32 irq;
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
+ u32 irq;
- irq = dssdev->manager->id == OMAP_DSS_CHANNEL_LCD ?
- DISPC_IRQ_FRAMEDONE : DISPC_IRQ_FRAMEDONE2;
+ irq = dssdev->manager->id == OMAP_DSS_CHANNEL_LCD ?
+ DISPC_IRQ_FRAMEDONE : DISPC_IRQ_FRAMEDONE2;
- omap_dispc_unregister_isr(dsi_framedone_irq_callback, (void *) dssdev,
- irq);
+ omap_dispc_unregister_isr(dsi_framedone_irq_callback,
+ (void *) dssdev, irq);
+ }
}
static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
@@ -4106,7 +4314,7 @@
return r;
}
- r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r) {
DSSERR("Failed to set dispc clocks\n");
return r;
@@ -4166,10 +4374,12 @@
return 0;
err3:
- dsi_cio_uninit(dsidev);
+ dsi_cio_uninit(dssdev);
err2:
dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
dss_select_dsi_clk_source(dsi_module, OMAP_DSS_CLK_SRC_FCK);
+ dss_select_lcd_clk_source(dssdev->manager->id, OMAP_DSS_CLK_SRC_FCK);
+
err1:
dsi_pll_uninit(dsidev, true);
err0:
@@ -4195,7 +4405,8 @@
dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
dss_select_dsi_clk_source(dsi_module, OMAP_DSS_CLK_SRC_FCK);
- dsi_cio_uninit(dsidev);
+ dss_select_lcd_clk_source(dssdev->manager->id, OMAP_DSS_CLK_SRC_FCK);
+ dsi_cio_uninit(dssdev);
dsi_pll_uninit(dsidev, disconnect_lanes);
}
@@ -4211,6 +4422,12 @@
mutex_lock(&dsi->lock);
+ if (dssdev->manager == NULL) {
+ DSSERR("failed to enable display: no manager\n");
+ r = -ENODEV;
+ goto err_start_dev;
+ }
+
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
@@ -4307,9 +4524,10 @@
DSSDBG("DSI init\n");
- /* XXX these should be figured out dynamically */
- dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
- OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
+ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
+ OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
+ }
if (dsi->vdds_dsi_reg == NULL) {
struct regulator *vdds_dsi;
@@ -4435,10 +4653,7 @@
dsi->dss_clk = clk;
- if (cpu_is_omap34xx() || cpu_is_omap3630())
- clk = clk_get(&dsidev->dev, "dss2_alwon_fck");
- else
- clk = clk_get(&dsidev->dev, "sys_clk");
+ clk = clk_get(&dsidev->dev, "sys_clk");
if (IS_ERR(clk)) {
DSSERR("can't get sys_clk\n");
clk_put(dsi->dss_clk);
@@ -4462,7 +4677,7 @@
}
/* DSI1 HW IP initialisation */
-static int omap_dsi1hw_probe(struct platform_device *dsidev)
+static int omap_dsihw_probe(struct platform_device *dsidev)
{
struct omap_display_platform_data *dss_plat_data;
struct omap_dss_board_info *board_info;
@@ -4483,7 +4698,8 @@
dss_plat_data = dsidev->dev.platform_data;
board_info = dss_plat_data->board_data;
- dsi->dsi_mux_pads = board_info->dsi_mux_pads;
+ dsi->enable_pads = board_info->dsi_enable_pads;
+ dsi->disable_pads = board_info->dsi_disable_pads;
spin_lock_init(&dsi->irq_lock);
spin_lock_init(&dsi->errors_lock);
@@ -4539,7 +4755,7 @@
/* DSI VCs initialization */
for (i = 0; i < ARRAY_SIZE(dsi->vc); i++) {
- dsi->vc[i].mode = DSI_VC_MODE_L4;
+ dsi->vc[i].source = DSI_VC_SOURCE_L4;
dsi->vc[i].dssdev = NULL;
dsi->vc[i].vc_id = 0;
}
@@ -4572,7 +4788,7 @@
return r;
}
-static int omap_dsi1hw_remove(struct platform_device *dsidev)
+static int omap_dsihw_remove(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@@ -4602,10 +4818,6 @@
static int dsi_runtime_suspend(struct device *dev)
{
- struct dsi_data *dsi = dsi_get_dsidrv_data(to_platform_device(dev));
-
- clk_disable(dsi->dss_clk);
-
dispc_runtime_put();
dss_runtime_put();
@@ -4614,7 +4826,6 @@
static int dsi_runtime_resume(struct device *dev)
{
- struct dsi_data *dsi = dsi_get_dsidrv_data(to_platform_device(dev));
int r;
r = dss_runtime_get();
@@ -4625,8 +4836,6 @@
if (r)
goto err_get_dispc;
- clk_enable(dsi->dss_clk);
-
return 0;
err_get_dispc:
@@ -4640,11 +4849,11 @@
.runtime_resume = dsi_runtime_resume,
};
-static struct platform_driver omap_dsi1hw_driver = {
- .probe = omap_dsi1hw_probe,
- .remove = omap_dsi1hw_remove,
+static struct platform_driver omap_dsihw_driver = {
+ .probe = omap_dsihw_probe,
+ .remove = omap_dsihw_remove,
.driver = {
- .name = "omapdss_dsi1",
+ .name = "omapdss_dsi",
.owner = THIS_MODULE,
.pm = &dsi_pm_ops,
},
@@ -4652,10 +4861,10 @@
int dsi_init_platform_driver(void)
{
- return platform_driver_register(&omap_dsi1hw_driver);
+ return platform_driver_register(&omap_dsihw_driver);
}
void dsi_uninit_platform_driver(void)
{
- return platform_driver_unregister(&omap_dsi1hw_driver);
+ return platform_driver_unregister(&omap_dsihw_driver);
}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 0f9c3a6..3e09726 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -639,6 +639,17 @@
REG_FLD_MOD(DSS_CONTROL, hdmi, 15, 15); /* VENC_HDMI_SWITCH */
}
+enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void)
+{
+ enum omap_display_type displays;
+
+ displays = dss_feat_get_supported_displays(OMAP_DSS_CHANNEL_DIGIT);
+ if ((displays & OMAP_DISPLAY_TYPE_HDMI) == 0)
+ return DSS_VENC_TV_CLK;
+
+ return REG_GET(DSS_CONTROL, 15, 15);
+}
+
static int dss_get_clocks(void)
{
struct clk *clk;
@@ -691,11 +702,6 @@
clk_put(dss.dss_clk);
}
-struct clk *dss_get_ick(void)
-{
- return clk_get(&dss.pdev->dev, "ick");
-}
-
int dss_runtime_get(void)
{
int r;
@@ -824,13 +830,11 @@
static int dss_runtime_suspend(struct device *dev)
{
dss_save_context();
- clk_disable(dss.dss_clk);
return 0;
}
static int dss_runtime_resume(struct device *dev)
{
- clk_enable(dss.dss_clk);
dss_restore_context();
return 0;
}
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 9c94b11..6308fc5 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -97,10 +97,10 @@
#define FLD_MOD(orig, val, start, end) \
(((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end))
-enum omap_parallel_interface_mode {
- OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */
- OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */
- OMAP_DSS_PARALLELMODE_DSI,
+enum dss_io_pad_mode {
+ DSS_IO_PAD_MODE_RESET,
+ DSS_IO_PAD_MODE_RFBI,
+ DSS_IO_PAD_MODE_BYPASS,
};
enum dss_hdmi_venc_clk_source_select {
@@ -108,6 +108,11 @@
DSS_HDMI_M_PCLK = 1,
};
+enum dss_dsi_content_type {
+ DSS_DSI_CONTENT_DCS,
+ DSS_DSI_CONTENT_GENERIC,
+};
+
struct dss_clock_info {
/* rates that we get with dividers below */
unsigned long fck;
@@ -150,16 +155,6 @@
bool use_sys_clk;
};
-/* HDMI PLL structure */
-struct hdmi_pll_info {
- u16 regn;
- u16 regm;
- u32 regmf;
- u16 regm2;
- u16 regsd;
- u16 dcofreq;
-};
-
struct seq_file;
struct platform_device;
@@ -209,9 +204,8 @@
int dss_runtime_get(void);
void dss_runtime_put(void);
-struct clk *dss_get_ick(void);
-
void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
+enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void);
const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
void dss_dump_clocks(struct seq_file *s);
@@ -279,6 +273,8 @@
int dsi_init_display(struct omap_dss_device *display);
void dsi_irq_handler(void);
+u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt);
+
unsigned long dsi_get_pll_hsdiv_dispc_rate(struct platform_device *dsidev);
int dsi_pll_set_clock_div(struct platform_device *dsidev,
struct dsi_clock_info *cinfo);
@@ -309,6 +305,11 @@
static inline void dsi_runtime_put(struct platform_device *dsidev)
{
}
+static inline u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt)
+{
+ WARN("%s: DSI not compiled in, returning pixel_size as 0\n", __func__);
+ return 0;
+}
static inline unsigned long dsi_get_pll_hsdiv_dispc_rate(struct platform_device *dsidev)
{
WARN("%s: DSI not compiled in, returning rate as 0\n", __func__);
@@ -385,90 +386,71 @@
void dispc_lcd_enable_signal_polarity(bool act_high);
void dispc_lcd_enable_signal(bool enable);
void dispc_pck_free_enable(bool enable);
-void dispc_enable_fifohandcheck(enum omap_channel channel, bool enable);
-
-void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height);
void dispc_set_digit_size(u16 width, u16 height);
-u32 dispc_get_plane_fifo_size(enum omap_plane plane);
-void dispc_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high);
void dispc_enable_fifomerge(bool enable);
-u32 dispc_get_burst_size(enum omap_plane plane);
-void dispc_enable_cpr(enum omap_channel channel, bool enable);
-void dispc_set_cpr_coef(enum omap_channel channel,
- struct omap_dss_cpr_coefs *coefs);
-
-void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr);
-void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr);
-void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y);
-void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height);
-void dispc_set_channel_out(enum omap_plane plane,
- enum omap_channel channel_out);
-
void dispc_enable_gamma_table(bool enable);
-int dispc_setup_plane(enum omap_plane plane,
- u32 paddr, u16 screen_width,
- u16 pos_x, u16 pos_y,
- u16 width, u16 height,
- u16 out_width, u16 out_height,
- enum omap_color_mode color_mode,
- bool ilace,
- enum omap_dss_rotation_type rotation_type,
- u8 rotation, bool mirror,
- u8 global_alpha, u8 pre_mult_alpha,
- enum omap_channel channel,
- u32 puv_addr);
-
-bool dispc_go_busy(enum omap_channel channel);
-void dispc_go(enum omap_channel channel);
-void dispc_enable_channel(enum omap_channel channel, bool enable);
-bool dispc_is_channel_enabled(enum omap_channel channel);
-int dispc_enable_plane(enum omap_plane plane, bool enable);
-void dispc_enable_replication(enum omap_plane plane, bool enable);
-
-void dispc_set_parallel_interface_mode(enum omap_channel channel,
- enum omap_parallel_interface_mode mode);
-void dispc_set_tft_data_lines(enum omap_channel channel, u8 data_lines);
-void dispc_set_lcd_display_type(enum omap_channel channel,
- enum omap_lcd_display_type type);
void dispc_set_loadmode(enum omap_dss_load_mode mode);
-void dispc_set_default_color(enum omap_channel channel, u32 color);
-u32 dispc_get_default_color(enum omap_channel channel);
-void dispc_set_trans_key(enum omap_channel ch,
- enum omap_dss_trans_key_type type,
- u32 trans_key);
-void dispc_get_trans_key(enum omap_channel ch,
- enum omap_dss_trans_key_type *type,
- u32 *trans_key);
-void dispc_enable_trans_key(enum omap_channel ch, bool enable);
-void dispc_enable_alpha_blending(enum omap_channel ch, bool enable);
-bool dispc_trans_key_enabled(enum omap_channel ch);
-bool dispc_alpha_blending_enabled(enum omap_channel ch);
-
bool dispc_lcd_timings_ok(struct omap_video_timings *timings);
-void dispc_set_lcd_timings(enum omap_channel channel,
- struct omap_video_timings *timings);
unsigned long dispc_fclk_rate(void);
-unsigned long dispc_lclk_rate(enum omap_channel channel);
-unsigned long dispc_pclk_rate(enum omap_channel channel);
-void dispc_set_pol_freq(enum omap_channel channel,
- enum omap_panel_config config, u8 acbi, u8 acb);
void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
struct dispc_clock_info *cinfo);
int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
struct dispc_clock_info *cinfo);
-int dispc_set_clock_div(enum omap_channel channel,
- struct dispc_clock_info *cinfo);
-int dispc_get_clock_div(enum omap_channel channel,
- struct dispc_clock_info *cinfo);
+u32 dispc_ovl_get_fifo_size(enum omap_plane plane);
+u32 dispc_ovl_get_burst_size(enum omap_plane plane);
+int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
+ bool ilace, enum omap_channel channel, bool replication,
+ u32 fifo_low, u32 fifo_high);
+int dispc_ovl_enable(enum omap_plane plane, bool enable);
+
+
+void dispc_mgr_enable_fifohandcheck(enum omap_channel channel, bool enable);
+void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width, u16 height);
+void dispc_mgr_enable_cpr(enum omap_channel channel, bool enable);
+void dispc_mgr_set_cpr_coef(enum omap_channel channel,
+ struct omap_dss_cpr_coefs *coefs);
+bool dispc_mgr_go_busy(enum omap_channel channel);
+void dispc_mgr_go(enum omap_channel channel);
+void dispc_mgr_enable(enum omap_channel channel, bool enable);
+bool dispc_mgr_is_channel_enabled(enum omap_channel channel);
+void dispc_mgr_set_io_pad_mode(enum dss_io_pad_mode mode);
+void dispc_mgr_enable_stallmode(enum omap_channel channel, bool enable);
+void dispc_mgr_set_tft_data_lines(enum omap_channel channel, u8 data_lines);
+void dispc_mgr_set_lcd_display_type(enum omap_channel channel,
+ enum omap_lcd_display_type type);
+void dispc_mgr_set_default_color(enum omap_channel channel, u32 color);
+u32 dispc_mgr_get_default_color(enum omap_channel channel);
+void dispc_mgr_set_trans_key(enum omap_channel ch,
+ enum omap_dss_trans_key_type type,
+ u32 trans_key);
+void dispc_mgr_get_trans_key(enum omap_channel ch,
+ enum omap_dss_trans_key_type *type,
+ u32 *trans_key);
+void dispc_mgr_enable_trans_key(enum omap_channel ch, bool enable);
+void dispc_mgr_enable_alpha_fixed_zorder(enum omap_channel ch, bool enable);
+bool dispc_mgr_trans_key_enabled(enum omap_channel ch);
+bool dispc_mgr_alpha_fixed_zorder_enabled(enum omap_channel ch);
+void dispc_mgr_set_lcd_timings(enum omap_channel channel,
+ struct omap_video_timings *timings);
+void dispc_mgr_set_pol_freq(enum omap_channel channel,
+ enum omap_panel_config config, u8 acbi, u8 acb);
+unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
+unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
+int dispc_mgr_set_clock_div(enum omap_channel channel,
+ struct dispc_clock_info *cinfo);
+int dispc_mgr_get_clock_div(enum omap_channel channel,
+ struct dispc_clock_info *cinfo);
+
/* VENC */
#ifdef CONFIG_OMAP2_DSS_VENC
int venc_init_platform_driver(void);
void venc_uninit_platform_driver(void);
void venc_dump_regs(struct seq_file *s);
int venc_init_display(struct omap_dss_device *display);
+unsigned long venc_get_pixel_clock(void);
#else
static inline int venc_init_platform_driver(void)
{
@@ -477,6 +459,11 @@
static inline void venc_uninit_platform_driver(void)
{
}
+static inline unsigned long venc_get_pixel_clock(void)
+{
+ WARN("%s: VENC not compiled in, returning pclk as 0\n", __func__);
+ return 0;
+}
#endif
/* HDMI */
@@ -484,6 +471,8 @@
int hdmi_init_platform_driver(void);
void hdmi_uninit_platform_driver(void);
int hdmi_init_display(struct omap_dss_device *dssdev);
+unsigned long hdmi_get_pixel_clock(void);
+void hdmi_dump_regs(struct seq_file *s);
#else
static inline int hdmi_init_display(struct omap_dss_device *dssdev)
{
@@ -496,12 +485,19 @@
static inline void hdmi_uninit_platform_driver(void)
{
}
+static inline unsigned long hdmi_get_pixel_clock(void)
+{
+ WARN("%s: HDMI not compiled in, returning pclk as 0\n", __func__);
+ return 0;
+}
#endif
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev);
void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev);
void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev);
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
+int omapdss_hdmi_read_edid(u8 *buf, int len);
+bool omapdss_hdmi_detect(void);
int hdmi_panel_init(void);
void hdmi_panel_exit(void);
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index b415c4e..b402699 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -47,6 +47,7 @@
const int num_ovls;
const enum omap_display_type *supported_displays;
const enum omap_color_mode *supported_color_modes;
+ const enum omap_overlay_caps *overlay_caps;
const char * const *clksrc_names;
const struct dss_param_range *dss_params;
@@ -209,6 +210,68 @@
OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
OMAP_DSS_COLOR_RGBX32,
+
+ /* OMAP_DSS_VIDEO3 */
+ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB12U |
+ OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_ARGB16_1555 |
+ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_NV12 |
+ OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_RGB24U |
+ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_UYVY |
+ OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
+ OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
+ OMAP_DSS_COLOR_RGBX32,
+};
+
+static const enum omap_overlay_caps omap2_dss_overlay_caps[] = {
+ /* OMAP_DSS_GFX */
+ 0,
+
+ /* OMAP_DSS_VIDEO1 */
+ OMAP_DSS_OVL_CAP_SCALE,
+
+ /* OMAP_DSS_VIDEO2 */
+ OMAP_DSS_OVL_CAP_SCALE,
+};
+
+static const enum omap_overlay_caps omap3430_dss_overlay_caps[] = {
+ /* OMAP_DSS_GFX */
+ OMAP_DSS_OVL_CAP_GLOBAL_ALPHA,
+
+ /* OMAP_DSS_VIDEO1 */
+ OMAP_DSS_OVL_CAP_SCALE,
+
+ /* OMAP_DSS_VIDEO2 */
+ OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA,
+};
+
+static const enum omap_overlay_caps omap3630_dss_overlay_caps[] = {
+ /* OMAP_DSS_GFX */
+ OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA,
+
+ /* OMAP_DSS_VIDEO1 */
+ OMAP_DSS_OVL_CAP_SCALE,
+
+ /* OMAP_DSS_VIDEO2 */
+ OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
+ OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA,
+};
+
+static const enum omap_overlay_caps omap4_dss_overlay_caps[] = {
+ /* OMAP_DSS_GFX */
+ OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA |
+ OMAP_DSS_OVL_CAP_ZORDER,
+
+ /* OMAP_DSS_VIDEO1 */
+ OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
+ OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER,
+
+ /* OMAP_DSS_VIDEO2 */
+ OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
+ OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER,
+
+ /* OMAP_DSS_VIDEO3 */
+ OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
+ OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER,
};
static const char * const omap2_dss_clk_source_names[] = {
@@ -233,32 +296,38 @@
static const struct dss_param_range omap2_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 173000000 },
+ [FEAT_PARAM_DSS_PCD] = { 2, 255 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, 0 },
[FEAT_PARAM_DSIPLL_FINT] = { 0, 0 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 0, 0 },
+ [FEAT_PARAM_DOWNSCALE] = { 1, 2 },
};
static const struct dss_param_range omap3_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 173000000 },
+ [FEAT_PARAM_DSS_PCD] = { 1, 255 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, (1 << 7) - 1 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, (1 << 11) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, (1 << 4) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, (1 << 4) - 1 },
[FEAT_PARAM_DSIPLL_FINT] = { 750000, 2100000 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 1, (1 << 13) - 1},
+ [FEAT_PARAM_DOWNSCALE] = { 1, 4 },
};
static const struct dss_param_range omap4_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 186000000 },
+ [FEAT_PARAM_DSS_PCD] = { 1, 255 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, (1 << 8) - 1 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, (1 << 12) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_FINT] = { 500000, 2500000 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 0, (1 << 13) - 1 },
+ [FEAT_PARAM_DOWNSCALE] = { 1, 4 },
};
/* OMAP2 DSS Features */
@@ -275,6 +344,7 @@
.num_ovls = 3,
.supported_displays = omap2_dss_supported_displays,
.supported_color_modes = omap2_dss_supported_color_modes,
+ .overlay_caps = omap2_dss_overlay_caps,
.clksrc_names = omap2_dss_clk_source_names,
.dss_params = omap2_dss_param_range,
.buffer_size_unit = 1,
@@ -287,18 +357,19 @@
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.has_feature =
- FEAT_GLOBAL_ALPHA | FEAT_LCDENABLEPOL |
+ FEAT_LCDENABLEPOL |
FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
FEAT_FUNCGATED | FEAT_ROWREPEATENABLE |
FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF |
FEAT_DSI_PLL_FREQSEL | FEAT_DSI_REVERSE_TXCLKESC |
FEAT_VENC_REQUIRES_TV_DAC_CLK | FEAT_CPR | FEAT_PRELOAD |
- FEAT_FIR_COEF_V,
+ FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER,
.num_mgrs = 2,
.num_ovls = 3,
.supported_displays = omap3430_dss_supported_displays,
.supported_color_modes = omap3_dss_supported_color_modes,
+ .overlay_caps = omap3430_dss_overlay_caps,
.clksrc_names = omap3_dss_clk_source_names,
.dss_params = omap3_dss_param_range,
.buffer_size_unit = 1,
@@ -310,18 +381,19 @@
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.has_feature =
- FEAT_GLOBAL_ALPHA | FEAT_LCDENABLEPOL |
+ FEAT_LCDENABLEPOL |
FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
- FEAT_PRE_MULT_ALPHA | FEAT_FUNCGATED |
+ FEAT_FUNCGATED |
FEAT_ROWREPEATENABLE | FEAT_LINEBUFFERSPLIT |
FEAT_RESIZECONF | FEAT_DSI_PLL_PWR_BUG |
FEAT_DSI_PLL_FREQSEL | FEAT_CPR | FEAT_PRELOAD |
- FEAT_FIR_COEF_V,
+ FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER,
.num_mgrs = 2,
.num_ovls = 3,
.supported_displays = omap3630_dss_supported_displays,
.supported_color_modes = omap3_dss_supported_color_modes,
+ .overlay_caps = omap3630_dss_overlay_caps,
.clksrc_names = omap3_dss_clk_source_names,
.dss_params = omap3_dss_param_range,
.buffer_size_unit = 1,
@@ -335,17 +407,18 @@
.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
.has_feature =
- FEAT_GLOBAL_ALPHA | FEAT_PRE_MULT_ALPHA |
- FEAT_MGR_LCD2 | FEAT_GLOBAL_ALPHA_VID1 |
+ FEAT_MGR_LCD2 |
FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC |
FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
FEAT_DSI_GNQ | FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 |
- FEAT_CPR | FEAT_PRELOAD | FEAT_FIR_COEF_V,
+ FEAT_CPR | FEAT_PRELOAD | FEAT_FIR_COEF_V |
+ FEAT_ALPHA_FREE_ZORDER,
.num_mgrs = 3,
- .num_ovls = 3,
+ .num_ovls = 4,
.supported_displays = omap4_dss_supported_displays,
.supported_color_modes = omap4_dss_supported_color_modes,
+ .overlay_caps = omap4_dss_overlay_caps,
.clksrc_names = omap4_dss_clk_source_names,
.dss_params = omap4_dss_param_range,
.buffer_size_unit = 16,
@@ -358,24 +431,50 @@
.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
.has_feature =
- FEAT_GLOBAL_ALPHA | FEAT_PRE_MULT_ALPHA |
- FEAT_MGR_LCD2 | FEAT_GLOBAL_ALPHA_VID1 |
+ FEAT_MGR_LCD2 |
FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC |
FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
FEAT_DSI_GNQ | FEAT_HDMI_CTS_SWMODE |
FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 | FEAT_CPR |
- FEAT_PRELOAD | FEAT_FIR_COEF_V,
+ FEAT_PRELOAD | FEAT_FIR_COEF_V | FEAT_ALPHA_FREE_ZORDER,
.num_mgrs = 3,
- .num_ovls = 3,
+ .num_ovls = 4,
.supported_displays = omap4_dss_supported_displays,
.supported_color_modes = omap4_dss_supported_color_modes,
+ .overlay_caps = omap4_dss_overlay_caps,
.clksrc_names = omap4_dss_clk_source_names,
.dss_params = omap4_dss_param_range,
.buffer_size_unit = 16,
.burst_size_unit = 16,
};
+#if defined(CONFIG_OMAP4_DSS_HDMI)
+/* HDMI OMAP4 Functions*/
+static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
+
+ .video_configure = ti_hdmi_4xxx_basic_configure,
+ .phy_enable = ti_hdmi_4xxx_phy_enable,
+ .phy_disable = ti_hdmi_4xxx_phy_disable,
+ .read_edid = ti_hdmi_4xxx_read_edid,
+ .detect = ti_hdmi_4xxx_detect,
+ .pll_enable = ti_hdmi_4xxx_pll_enable,
+ .pll_disable = ti_hdmi_4xxx_pll_disable,
+ .video_enable = ti_hdmi_4xxx_wp_video_start,
+ .dump_wrapper = ti_hdmi_4xxx_wp_dump,
+ .dump_core = ti_hdmi_4xxx_core_dump,
+ .dump_pll = ti_hdmi_4xxx_pll_dump,
+ .dump_phy = ti_hdmi_4xxx_phy_dump,
+
+};
+
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data)
+{
+ if (cpu_is_omap44xx())
+ ip_data->ops = &omap4_hdmi_functions;
+}
+#endif
+
/* Functions returning values related to a DSS feature */
int dss_feat_get_num_mgrs(void)
{
@@ -407,6 +506,11 @@
return omap_current_dss_features->supported_color_modes[plane];
}
+enum omap_overlay_caps dss_feat_get_overlay_caps(enum omap_plane plane)
+{
+ return omap_current_dss_features->overlay_caps[plane];
+}
+
bool dss_feat_color_mode_supported(enum omap_plane plane,
enum omap_color_mode color_mode)
{
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index b7398cb..6a6c05d 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -20,16 +20,17 @@
#ifndef __OMAP2_DSS_FEATURES_H
#define __OMAP2_DSS_FEATURES_H
+#if defined(CONFIG_OMAP4_DSS_HDMI)
+#include "ti_hdmi.h"
+#endif
+
#define MAX_DSS_MANAGERS 3
-#define MAX_DSS_OVERLAYS 3
+#define MAX_DSS_OVERLAYS 4
#define MAX_DSS_LCD_MANAGERS 2
#define MAX_NUM_DSI 2
/* DSS has feature id */
enum dss_feat_id {
- FEAT_GLOBAL_ALPHA = 1 << 0,
- FEAT_GLOBAL_ALPHA_VID1 = 1 << 1,
- FEAT_PRE_MULT_ALPHA = 1 << 2,
FEAT_LCDENABLEPOL = 1 << 3,
FEAT_LCDENABLESIGNAL = 1 << 4,
FEAT_PCKFREEENABLE = 1 << 5,
@@ -55,6 +56,8 @@
FEAT_CPR = 1 << 23,
FEAT_PRELOAD = 1 << 24,
FEAT_FIR_COEF_V = 1 << 25,
+ FEAT_ALPHA_FIXED_ZORDER = 1 << 26,
+ FEAT_ALPHA_FREE_ZORDER = 1 << 27,
};
/* DSS register field id */
@@ -75,12 +78,14 @@
enum dss_range_param {
FEAT_PARAM_DSS_FCK,
+ FEAT_PARAM_DSS_PCD,
FEAT_PARAM_DSIPLL_REGN,
FEAT_PARAM_DSIPLL_REGM,
FEAT_PARAM_DSIPLL_REGM_DISPC,
FEAT_PARAM_DSIPLL_REGM_DSI,
FEAT_PARAM_DSIPLL_FINT,
FEAT_PARAM_DSIPLL_LPDIV,
+ FEAT_PARAM_DOWNSCALE,
};
/* DSS Feature Functions */
@@ -90,6 +95,7 @@
unsigned long dss_feat_get_param_max(enum dss_range_param param);
enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel);
enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane);
+enum omap_overlay_caps dss_feat_get_overlay_caps(enum omap_plane plane);
bool dss_feat_color_mode_supported(enum omap_plane plane,
enum omap_color_mode color_mode);
const char *dss_feat_get_clk_source_name(enum omap_dss_clk_source id);
@@ -100,4 +106,7 @@
bool dss_has_feature(enum dss_feat_id id);
void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
void dss_features_init(void);
+#if defined(CONFIG_OMAP4_DSS_HDMI)
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data);
+#endif
#endif
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 256f27a9..3262f0f 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -37,26 +37,41 @@
defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
#include <sound/soc.h>
#include <sound/pcm_params.h>
+#include "ti_hdmi_4xxx_ip.h"
#endif
+#include "ti_hdmi.h"
#include "dss.h"
-#include "hdmi.h"
#include "dss_features.h"
+#define HDMI_WP 0x0
+#define HDMI_CORE_SYS 0x400
+#define HDMI_CORE_AV 0x900
+#define HDMI_PLLCTRL 0x200
+#define HDMI_PHY 0x300
+
+/* HDMI EDID Length move this */
+#define HDMI_EDID_MAX_LENGTH 256
+#define EDID_TIMING_DESCRIPTOR_SIZE 0x12
+#define EDID_DESCRIPTOR_BLOCK0_ADDRESS 0x36
+#define EDID_DESCRIPTOR_BLOCK1_ADDRESS 0x80
+#define EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR 4
+#define EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR 4
+
+#define OMAP_HDMI_TIMINGS_NB 34
+
+#define HDMI_DEFAULT_REGN 16
+#define HDMI_DEFAULT_REGM2 1
+
static struct {
struct mutex lock;
struct omap_display_platform_data *pdata;
struct platform_device *pdev;
- void __iomem *base_wp; /* HDMI wrapper */
+ struct hdmi_ip_data ip_data;
int code;
int mode;
- u8 edid[HDMI_EDID_MAX_LENGTH];
- u8 edid_set;
- bool custom_set;
- struct hdmi_config cfg;
struct clk *sys_clk;
- struct clk *hdmi_clk;
} hdmi;
/*
@@ -144,30 +159,6 @@
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, 27, 28, -1, 33};
-static const u8 edid_header[8] = {0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0};
-
-static inline void hdmi_write_reg(const struct hdmi_reg idx, u32 val)
-{
- __raw_writel(val, hdmi.base_wp + idx.idx);
-}
-
-static inline u32 hdmi_read_reg(const struct hdmi_reg idx)
-{
- return __raw_readl(hdmi.base_wp + idx.idx);
-}
-
-static inline int hdmi_wait_for_bit_change(const struct hdmi_reg idx,
- int b2, int b1, u32 val)
-{
- u32 t = 0;
- while (val != REG_GET(idx, b2, b1)) {
- udelay(1);
- if (t++ > 10000)
- return !val;
- }
- return val;
-}
-
static int hdmi_runtime_get(void)
{
int r;
@@ -193,304 +184,7 @@
{
DSSDBG("init_display\n");
- return 0;
-}
-
-static int hdmi_pll_init(enum hdmi_clk_refsel refsel, int dcofreq,
- struct hdmi_pll_info *fmt, u16 sd)
-{
- u32 r;
-
- /* PLL start always use manual mode */
- REG_FLD_MOD(PLLCTRL_PLL_CONTROL, 0x0, 0, 0);
-
- r = hdmi_read_reg(PLLCTRL_CFG1);
- r = FLD_MOD(r, fmt->regm, 20, 9); /* CFG1_PLL_REGM */
- r = FLD_MOD(r, fmt->regn, 8, 1); /* CFG1_PLL_REGN */
-
- hdmi_write_reg(PLLCTRL_CFG1, r);
-
- r = hdmi_read_reg(PLLCTRL_CFG2);
-
- r = FLD_MOD(r, 0x0, 12, 12); /* PLL_HIGHFREQ divide by 2 */
- r = FLD_MOD(r, 0x1, 13, 13); /* PLL_REFEN */
- r = FLD_MOD(r, 0x0, 14, 14); /* PHY_CLKINEN de-assert during locking */
-
- if (dcofreq) {
- /* divider programming for frequency beyond 1000Mhz */
- REG_FLD_MOD(PLLCTRL_CFG3, sd, 17, 10);
- r = FLD_MOD(r, 0x4, 3, 1); /* 1000MHz and 2000MHz */
- } else {
- r = FLD_MOD(r, 0x2, 3, 1); /* 500MHz and 1000MHz */
- }
-
- hdmi_write_reg(PLLCTRL_CFG2, r);
-
- r = hdmi_read_reg(PLLCTRL_CFG4);
- r = FLD_MOD(r, fmt->regm2, 24, 18);
- r = FLD_MOD(r, fmt->regmf, 17, 0);
-
- hdmi_write_reg(PLLCTRL_CFG4, r);
-
- /* go now */
- REG_FLD_MOD(PLLCTRL_PLL_GO, 0x1, 0, 0);
-
- /* wait for bit change */
- if (hdmi_wait_for_bit_change(PLLCTRL_PLL_GO, 0, 0, 1) != 1) {
- DSSERR("PLL GO bit not set\n");
- return -ETIMEDOUT;
- }
-
- /* Wait till the lock bit is set in PLL status */
- if (hdmi_wait_for_bit_change(PLLCTRL_PLL_STATUS, 1, 1, 1) != 1) {
- DSSWARN("cannot lock PLL\n");
- DSSWARN("CFG1 0x%x\n",
- hdmi_read_reg(PLLCTRL_CFG1));
- DSSWARN("CFG2 0x%x\n",
- hdmi_read_reg(PLLCTRL_CFG2));
- DSSWARN("CFG4 0x%x\n",
- hdmi_read_reg(PLLCTRL_CFG4));
- return -ETIMEDOUT;
- }
-
- DSSDBG("PLL locked!\n");
-
- return 0;
-}
-
-/* PHY_PWR_CMD */
-static int hdmi_set_phy_pwr(enum hdmi_phy_pwr val)
-{
- /* Command for power control of HDMI PHY */
- REG_FLD_MOD(HDMI_WP_PWR_CTRL, val, 7, 6);
-
- /* Status of the power control of HDMI PHY */
- if (hdmi_wait_for_bit_change(HDMI_WP_PWR_CTRL, 5, 4, val) != val) {
- DSSERR("Failed to set PHY power mode to %d\n", val);
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-/* PLL_PWR_CMD */
-static int hdmi_set_pll_pwr(enum hdmi_pll_pwr val)
-{
- /* Command for power control of HDMI PLL */
- REG_FLD_MOD(HDMI_WP_PWR_CTRL, val, 3, 2);
-
- /* wait till PHY_PWR_STATUS is set */
- if (hdmi_wait_for_bit_change(HDMI_WP_PWR_CTRL, 1, 0, val) != val) {
- DSSERR("Failed to set PHY_PWR_STATUS\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int hdmi_pll_reset(void)
-{
- /* SYSRESET controlled by power FSM */
- REG_FLD_MOD(PLLCTRL_PLL_CONTROL, 0x0, 3, 3);
-
- /* READ 0x0 reset is in progress */
- if (hdmi_wait_for_bit_change(PLLCTRL_PLL_STATUS, 0, 0, 1) != 1) {
- DSSERR("Failed to sysreset PLL\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int hdmi_phy_init(void)
-{
- u16 r = 0;
-
- r = hdmi_set_phy_pwr(HDMI_PHYPWRCMD_LDOON);
- if (r)
- return r;
-
- r = hdmi_set_phy_pwr(HDMI_PHYPWRCMD_TXON);
- if (r)
- return r;
-
- /*
- * Read address 0 in order to get the SCP reset done completed
- * Dummy access performed to make sure reset is done
- */
- hdmi_read_reg(HDMI_TXPHY_TX_CTRL);
-
- /*
- * Write to phy address 0 to configure the clock
- * use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
- */
- REG_FLD_MOD(HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
-
- /* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
- hdmi_write_reg(HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
-
- /* Setup max LDO voltage */
- REG_FLD_MOD(HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
-
- /* Write to phy address 3 to change the polarity control */
- REG_FLD_MOD(HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
-
- return 0;
-}
-
-static int hdmi_pll_program(struct hdmi_pll_info *fmt)
-{
- u16 r = 0;
- enum hdmi_clk_refsel refsel;
-
- r = hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF);
- if (r)
- return r;
-
- r = hdmi_set_pll_pwr(HDMI_PLLPWRCMD_BOTHON_ALLCLKS);
- if (r)
- return r;
-
- r = hdmi_pll_reset();
- if (r)
- return r;
-
- refsel = HDMI_REFSEL_SYSCLK;
-
- r = hdmi_pll_init(refsel, fmt->dcofreq, fmt, fmt->regsd);
- if (r)
- return r;
-
- return 0;
-}
-
-static void hdmi_phy_off(void)
-{
- hdmi_set_phy_pwr(HDMI_PHYPWRCMD_OFF);
-}
-
-static int hdmi_core_ddc_edid(u8 *pedid, int ext)
-{
- u32 i, j;
- char checksum = 0;
- u32 offset = 0;
-
- /* Turn on CLK for DDC */
- REG_FLD_MOD(HDMI_CORE_AV_DPD, 0x7, 2, 0);
-
- /*
- * SW HACK : Without the Delay DDC(i2c bus) reads 0 values /
- * right shifted values( The behavior is not consistent and seen only
- * with some TV's)
- */
- usleep_range(800, 1000);
-
- if (!ext) {
- /* Clk SCL Devices */
- REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0xA, 3, 0);
-
- /* HDMI_CORE_DDC_STATUS_IN_PROG */
- if (hdmi_wait_for_bit_change(HDMI_CORE_DDC_STATUS,
- 4, 4, 0) != 0) {
- DSSERR("Failed to program DDC\n");
- return -ETIMEDOUT;
- }
-
- /* Clear FIFO */
- REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0x9, 3, 0);
-
- /* HDMI_CORE_DDC_STATUS_IN_PROG */
- if (hdmi_wait_for_bit_change(HDMI_CORE_DDC_STATUS,
- 4, 4, 0) != 0) {
- DSSERR("Failed to program DDC\n");
- return -ETIMEDOUT;
- }
-
- } else {
- if (ext % 2 != 0)
- offset = 0x80;
- }
-
- /* Load Segment Address Register */
- REG_FLD_MOD(HDMI_CORE_DDC_SEGM, ext/2, 7, 0);
-
- /* Load Slave Address Register */
- REG_FLD_MOD(HDMI_CORE_DDC_ADDR, 0xA0 >> 1, 7, 1);
-
- /* Load Offset Address Register */
- REG_FLD_MOD(HDMI_CORE_DDC_OFFSET, offset, 7, 0);
-
- /* Load Byte Count */
- REG_FLD_MOD(HDMI_CORE_DDC_COUNT1, 0x80, 7, 0);
- REG_FLD_MOD(HDMI_CORE_DDC_COUNT2, 0x0, 1, 0);
-
- /* Set DDC_CMD */
- if (ext)
- REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0x4, 3, 0);
- else
- REG_FLD_MOD(HDMI_CORE_DDC_CMD, 0x2, 3, 0);
-
- /* HDMI_CORE_DDC_STATUS_BUS_LOW */
- if (REG_GET(HDMI_CORE_DDC_STATUS, 6, 6) == 1) {
- DSSWARN("I2C Bus Low?\n");
- return -EIO;
- }
- /* HDMI_CORE_DDC_STATUS_NO_ACK */
- if (REG_GET(HDMI_CORE_DDC_STATUS, 5, 5) == 1) {
- DSSWARN("I2C No Ack\n");
- return -EIO;
- }
-
- i = ext * 128;
- j = 0;
- while (((REG_GET(HDMI_CORE_DDC_STATUS, 4, 4) == 1) ||
- (REG_GET(HDMI_CORE_DDC_STATUS, 2, 2) == 0)) &&
- j < 128) {
-
- if (REG_GET(HDMI_CORE_DDC_STATUS, 2, 2) == 0) {
- /* FIFO not empty */
- pedid[i++] = REG_GET(HDMI_CORE_DDC_DATA, 7, 0);
- j++;
- }
- }
-
- for (j = 0; j < 128; j++)
- checksum += pedid[j];
-
- if (checksum != 0) {
- DSSERR("E-EDID checksum failed!!\n");
- return -EIO;
- }
-
- return 0;
-}
-
-static int read_edid(u8 *pedid, u16 max_length)
-{
- int r = 0, n = 0, i = 0;
- int max_ext_blocks = (max_length / 128) - 1;
-
- r = hdmi_core_ddc_edid(pedid, 0);
- if (r) {
- return r;
- } else {
- n = pedid[0x7e];
-
- /*
- * README: need to comply with max_length set by the caller.
- * Better implementation should be to allocate necessary
- * memory to store EDID according to nb_block field found
- * in first block
- */
- if (n > max_ext_blocks)
- n = max_ext_blocks;
-
- for (i = 1; i <= n; i++) {
- r = hdmi_core_ddc_edid(pedid, i);
- if (r)
- return r;
- }
- }
+ dss_init_hdmi_ip_ops(&hdmi.ip_data);
return 0;
}
@@ -518,7 +212,7 @@
{
int i = 0, code = -1, temp_vsync = 0, temp_hsync = 0;
int timing_vsync = 0, timing_hsync = 0;
- struct omap_video_timings temp;
+ struct hdmi_video_timings temp;
struct hdmi_cm cm = {-1};
DSSDBG("hdmi_get_code\n");
@@ -556,500 +250,6 @@
return cm;
}
-static void get_horz_vert_timing_info(int current_descriptor_addrs, u8 *edid ,
- struct omap_video_timings *timings)
-{
- /* X and Y resolution */
- timings->x_res = (((edid[current_descriptor_addrs + 4] & 0xF0) << 4) |
- edid[current_descriptor_addrs + 2]);
- timings->y_res = (((edid[current_descriptor_addrs + 7] & 0xF0) << 4) |
- edid[current_descriptor_addrs + 5]);
-
- timings->pixel_clock = ((edid[current_descriptor_addrs + 1] << 8) |
- edid[current_descriptor_addrs]);
-
- timings->pixel_clock = 10 * timings->pixel_clock;
-
- /* HORIZONTAL FRONT PORCH */
- timings->hfp = edid[current_descriptor_addrs + 8] |
- ((edid[current_descriptor_addrs + 11] & 0xc0) << 2);
- /* HORIZONTAL SYNC WIDTH */
- timings->hsw = edid[current_descriptor_addrs + 9] |
- ((edid[current_descriptor_addrs + 11] & 0x30) << 4);
- /* HORIZONTAL BACK PORCH */
- timings->hbp = (((edid[current_descriptor_addrs + 4] & 0x0F) << 8) |
- edid[current_descriptor_addrs + 3]) -
- (timings->hfp + timings->hsw);
- /* VERTICAL FRONT PORCH */
- timings->vfp = ((edid[current_descriptor_addrs + 10] & 0xF0) >> 4) |
- ((edid[current_descriptor_addrs + 11] & 0x0f) << 2);
- /* VERTICAL SYNC WIDTH */
- timings->vsw = (edid[current_descriptor_addrs + 10] & 0x0F) |
- ((edid[current_descriptor_addrs + 11] & 0x03) << 4);
- /* VERTICAL BACK PORCH */
- timings->vbp = (((edid[current_descriptor_addrs + 7] & 0x0F) << 8) |
- edid[current_descriptor_addrs + 6]) -
- (timings->vfp + timings->vsw);
-
-}
-
-/* Description : This function gets the resolution information from EDID */
-static void get_edid_timing_data(u8 *edid)
-{
- u8 count;
- u16 current_descriptor_addrs;
- struct hdmi_cm cm;
- struct omap_video_timings edid_timings;
-
- /* search block 0, there are 4 DTDs arranged in priority order */
- for (count = 0; count < EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR; count++) {
- current_descriptor_addrs =
- EDID_DESCRIPTOR_BLOCK0_ADDRESS +
- count * EDID_TIMING_DESCRIPTOR_SIZE;
- get_horz_vert_timing_info(current_descriptor_addrs,
- edid, &edid_timings);
- cm = hdmi_get_code(&edid_timings);
- DSSDBG("Block0[%d] value matches code = %d , mode = %d\n",
- count, cm.code, cm.mode);
- if (cm.code == -1) {
- continue;
- } else {
- hdmi.code = cm.code;
- hdmi.mode = cm.mode;
- DSSDBG("code = %d , mode = %d\n",
- hdmi.code, hdmi.mode);
- return;
- }
- }
- if (edid[0x7e] != 0x00) {
- for (count = 0; count < EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR;
- count++) {
- current_descriptor_addrs =
- EDID_DESCRIPTOR_BLOCK1_ADDRESS +
- count * EDID_TIMING_DESCRIPTOR_SIZE;
- get_horz_vert_timing_info(current_descriptor_addrs,
- edid, &edid_timings);
- cm = hdmi_get_code(&edid_timings);
- DSSDBG("Block1[%d] value matches code = %d, mode = %d",
- count, cm.code, cm.mode);
- if (cm.code == -1) {
- continue;
- } else {
- hdmi.code = cm.code;
- hdmi.mode = cm.mode;
- DSSDBG("code = %d , mode = %d\n",
- hdmi.code, hdmi.mode);
- return;
- }
- }
- }
-
- DSSINFO("no valid timing found , falling back to VGA\n");
- hdmi.code = 4; /* setting default value of 640 480 VGA */
- hdmi.mode = HDMI_DVI;
-}
-
-static void hdmi_read_edid(struct omap_video_timings *dp)
-{
- int ret = 0, code;
-
- memset(hdmi.edid, 0, HDMI_EDID_MAX_LENGTH);
-
- if (!hdmi.edid_set)
- ret = read_edid(hdmi.edid, HDMI_EDID_MAX_LENGTH);
-
- if (!ret) {
- if (!memcmp(hdmi.edid, edid_header, sizeof(edid_header))) {
- /* search for timings of default resolution */
- get_edid_timing_data(hdmi.edid);
- hdmi.edid_set = true;
- }
- } else {
- DSSWARN("failed to read E-EDID\n");
- }
-
- if (!hdmi.edid_set) {
- DSSINFO("fallback to VGA\n");
- hdmi.code = 4; /* setting default value of 640 480 VGA */
- hdmi.mode = HDMI_DVI;
- }
-
- code = get_timings_index();
-
- *dp = cea_vesa_timings[code].timings;
-}
-
-static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,
- struct hdmi_core_infoframe_avi *avi_cfg,
- struct hdmi_core_packet_enable_repeat *repeat_cfg)
-{
- DSSDBG("Enter hdmi_core_init\n");
-
- /* video core */
- video_cfg->ip_bus_width = HDMI_INPUT_8BIT;
- video_cfg->op_dither_truc = HDMI_OUTPUTTRUNCATION_8BIT;
- video_cfg->deep_color_pkt = HDMI_DEEPCOLORPACKECTDISABLE;
- video_cfg->pkt_mode = HDMI_PACKETMODERESERVEDVALUE;
- video_cfg->hdmi_dvi = HDMI_DVI;
- video_cfg->tclk_sel_clkmult = HDMI_FPLL10IDCK;
-
- /* info frame */
- avi_cfg->db1_format = 0;
- avi_cfg->db1_active_info = 0;
- avi_cfg->db1_bar_info_dv = 0;
- avi_cfg->db1_scan_info = 0;
- avi_cfg->db2_colorimetry = 0;
- avi_cfg->db2_aspect_ratio = 0;
- avi_cfg->db2_active_fmt_ar = 0;
- avi_cfg->db3_itc = 0;
- avi_cfg->db3_ec = 0;
- avi_cfg->db3_q_range = 0;
- avi_cfg->db3_nup_scaling = 0;
- avi_cfg->db4_videocode = 0;
- avi_cfg->db5_pixel_repeat = 0;
- avi_cfg->db6_7_line_eoftop = 0 ;
- avi_cfg->db8_9_line_sofbottom = 0;
- avi_cfg->db10_11_pixel_eofleft = 0;
- avi_cfg->db12_13_pixel_sofright = 0;
-
- /* packet enable and repeat */
- repeat_cfg->audio_pkt = 0;
- repeat_cfg->audio_pkt_repeat = 0;
- repeat_cfg->avi_infoframe = 0;
- repeat_cfg->avi_infoframe_repeat = 0;
- repeat_cfg->gen_cntrl_pkt = 0;
- repeat_cfg->gen_cntrl_pkt_repeat = 0;
- repeat_cfg->generic_pkt = 0;
- repeat_cfg->generic_pkt_repeat = 0;
-}
-
-static void hdmi_core_powerdown_disable(void)
-{
- DSSDBG("Enter hdmi_core_powerdown_disable\n");
- REG_FLD_MOD(HDMI_CORE_CTRL1, 0x0, 0, 0);
-}
-
-static void hdmi_core_swreset_release(void)
-{
- DSSDBG("Enter hdmi_core_swreset_release\n");
- REG_FLD_MOD(HDMI_CORE_SYS_SRST, 0x0, 0, 0);
-}
-
-static void hdmi_core_swreset_assert(void)
-{
- DSSDBG("Enter hdmi_core_swreset_assert\n");
- REG_FLD_MOD(HDMI_CORE_SYS_SRST, 0x1, 0, 0);
-}
-
-/* DSS_HDMI_CORE_VIDEO_CONFIG */
-static void hdmi_core_video_config(struct hdmi_core_video_config *cfg)
-{
- u32 r = 0;
-
- /* sys_ctrl1 default configuration not tunable */
- r = hdmi_read_reg(HDMI_CORE_CTRL1);
- r = FLD_MOD(r, HDMI_CORE_CTRL1_VEN_FOLLOWVSYNC, 5, 5);
- r = FLD_MOD(r, HDMI_CORE_CTRL1_HEN_FOLLOWHSYNC, 4, 4);
- r = FLD_MOD(r, HDMI_CORE_CTRL1_BSEL_24BITBUS, 2, 2);
- r = FLD_MOD(r, HDMI_CORE_CTRL1_EDGE_RISINGEDGE, 1, 1);
- hdmi_write_reg(HDMI_CORE_CTRL1, r);
-
- REG_FLD_MOD(HDMI_CORE_SYS_VID_ACEN, cfg->ip_bus_width, 7, 6);
-
- /* Vid_Mode */
- r = hdmi_read_reg(HDMI_CORE_SYS_VID_MODE);
-
- /* dither truncation configuration */
- if (cfg->op_dither_truc > HDMI_OUTPUTTRUNCATION_12BIT) {
- r = FLD_MOD(r, cfg->op_dither_truc - 3, 7, 6);
- r = FLD_MOD(r, 1, 5, 5);
- } else {
- r = FLD_MOD(r, cfg->op_dither_truc, 7, 6);
- r = FLD_MOD(r, 0, 5, 5);
- }
- hdmi_write_reg(HDMI_CORE_SYS_VID_MODE, r);
-
- /* HDMI_Ctrl */
- r = hdmi_read_reg(HDMI_CORE_AV_HDMI_CTRL);
- r = FLD_MOD(r, cfg->deep_color_pkt, 6, 6);
- r = FLD_MOD(r, cfg->pkt_mode, 5, 3);
- r = FLD_MOD(r, cfg->hdmi_dvi, 0, 0);
- hdmi_write_reg(HDMI_CORE_AV_HDMI_CTRL, r);
-
- /* TMDS_CTRL */
- REG_FLD_MOD(HDMI_CORE_SYS_TMDS_CTRL,
- cfg->tclk_sel_clkmult, 6, 5);
-}
-
-static void hdmi_core_aux_infoframe_avi_config(
- struct hdmi_core_infoframe_avi info_avi)
-{
- u32 val;
- char sum = 0, checksum = 0;
-
- sum += 0x82 + 0x002 + 0x00D;
- hdmi_write_reg(HDMI_CORE_AV_AVI_TYPE, 0x082);
- hdmi_write_reg(HDMI_CORE_AV_AVI_VERS, 0x002);
- hdmi_write_reg(HDMI_CORE_AV_AVI_LEN, 0x00D);
-
- val = (info_avi.db1_format << 5) |
- (info_avi.db1_active_info << 4) |
- (info_avi.db1_bar_info_dv << 2) |
- (info_avi.db1_scan_info);
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(0), val);
- sum += val;
-
- val = (info_avi.db2_colorimetry << 6) |
- (info_avi.db2_aspect_ratio << 4) |
- (info_avi.db2_active_fmt_ar);
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(1), val);
- sum += val;
-
- val = (info_avi.db3_itc << 7) |
- (info_avi.db3_ec << 4) |
- (info_avi.db3_q_range << 2) |
- (info_avi.db3_nup_scaling);
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(2), val);
- sum += val;
-
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(3), info_avi.db4_videocode);
- sum += info_avi.db4_videocode;
-
- val = info_avi.db5_pixel_repeat;
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(4), val);
- sum += val;
-
- val = info_avi.db6_7_line_eoftop & 0x00FF;
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(5), val);
- sum += val;
-
- val = ((info_avi.db6_7_line_eoftop >> 8) & 0x00FF);
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(6), val);
- sum += val;
-
- val = info_avi.db8_9_line_sofbottom & 0x00FF;
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(7), val);
- sum += val;
-
- val = ((info_avi.db8_9_line_sofbottom >> 8) & 0x00FF);
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(8), val);
- sum += val;
-
- val = info_avi.db10_11_pixel_eofleft & 0x00FF;
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(9), val);
- sum += val;
-
- val = ((info_avi.db10_11_pixel_eofleft >> 8) & 0x00FF);
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(10), val);
- sum += val;
-
- val = info_avi.db12_13_pixel_sofright & 0x00FF;
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(11), val);
- sum += val;
-
- val = ((info_avi.db12_13_pixel_sofright >> 8) & 0x00FF);
- hdmi_write_reg(HDMI_CORE_AV_AVI_DBYTE(12), val);
- sum += val;
-
- checksum = 0x100 - sum;
- hdmi_write_reg(HDMI_CORE_AV_AVI_CHSUM, checksum);
-}
-
-static void hdmi_core_av_packet_config(
- struct hdmi_core_packet_enable_repeat repeat_cfg)
-{
- /* enable/repeat the infoframe */
- hdmi_write_reg(HDMI_CORE_AV_PB_CTRL1,
- (repeat_cfg.audio_pkt << 5) |
- (repeat_cfg.audio_pkt_repeat << 4) |
- (repeat_cfg.avi_infoframe << 1) |
- (repeat_cfg.avi_infoframe_repeat));
-
- /* enable/repeat the packet */
- hdmi_write_reg(HDMI_CORE_AV_PB_CTRL2,
- (repeat_cfg.gen_cntrl_pkt << 3) |
- (repeat_cfg.gen_cntrl_pkt_repeat << 2) |
- (repeat_cfg.generic_pkt << 1) |
- (repeat_cfg.generic_pkt_repeat));
-}
-
-static void hdmi_wp_init(struct omap_video_timings *timings,
- struct hdmi_video_format *video_fmt,
- struct hdmi_video_interface *video_int)
-{
- DSSDBG("Enter hdmi_wp_init\n");
-
- timings->hbp = 0;
- timings->hfp = 0;
- timings->hsw = 0;
- timings->vbp = 0;
- timings->vfp = 0;
- timings->vsw = 0;
-
- video_fmt->packing_mode = HDMI_PACK_10b_RGB_YUV444;
- video_fmt->y_res = 0;
- video_fmt->x_res = 0;
-
- video_int->vsp = 0;
- video_int->hsp = 0;
-
- video_int->interlacing = 0;
- video_int->tm = 0; /* HDMI_TIMING_SLAVE */
-
-}
-
-static void hdmi_wp_video_start(bool start)
-{
- REG_FLD_MOD(HDMI_WP_VIDEO_CFG, start, 31, 31);
-}
-
-static void hdmi_wp_video_init_format(struct hdmi_video_format *video_fmt,
- struct omap_video_timings *timings, struct hdmi_config *param)
-{
- DSSDBG("Enter hdmi_wp_video_init_format\n");
-
- video_fmt->y_res = param->timings.timings.y_res;
- video_fmt->x_res = param->timings.timings.x_res;
-
- timings->hbp = param->timings.timings.hbp;
- timings->hfp = param->timings.timings.hfp;
- timings->hsw = param->timings.timings.hsw;
- timings->vbp = param->timings.timings.vbp;
- timings->vfp = param->timings.timings.vfp;
- timings->vsw = param->timings.timings.vsw;
-}
-
-static void hdmi_wp_video_config_format(
- struct hdmi_video_format *video_fmt)
-{
- u32 l = 0;
-
- REG_FLD_MOD(HDMI_WP_VIDEO_CFG, video_fmt->packing_mode, 10, 8);
-
- l |= FLD_VAL(video_fmt->y_res, 31, 16);
- l |= FLD_VAL(video_fmt->x_res, 15, 0);
- hdmi_write_reg(HDMI_WP_VIDEO_SIZE, l);
-}
-
-static void hdmi_wp_video_config_interface(
- struct hdmi_video_interface *video_int)
-{
- u32 r;
- DSSDBG("Enter hdmi_wp_video_config_interface\n");
-
- r = hdmi_read_reg(HDMI_WP_VIDEO_CFG);
- r = FLD_MOD(r, video_int->vsp, 7, 7);
- r = FLD_MOD(r, video_int->hsp, 6, 6);
- r = FLD_MOD(r, video_int->interlacing, 3, 3);
- r = FLD_MOD(r, video_int->tm, 1, 0);
- hdmi_write_reg(HDMI_WP_VIDEO_CFG, r);
-}
-
-static void hdmi_wp_video_config_timing(
- struct omap_video_timings *timings)
-{
- u32 timing_h = 0;
- u32 timing_v = 0;
-
- DSSDBG("Enter hdmi_wp_video_config_timing\n");
-
- timing_h |= FLD_VAL(timings->hbp, 31, 20);
- timing_h |= FLD_VAL(timings->hfp, 19, 8);
- timing_h |= FLD_VAL(timings->hsw, 7, 0);
- hdmi_write_reg(HDMI_WP_VIDEO_TIMING_H, timing_h);
-
- timing_v |= FLD_VAL(timings->vbp, 31, 20);
- timing_v |= FLD_VAL(timings->vfp, 19, 8);
- timing_v |= FLD_VAL(timings->vsw, 7, 0);
- hdmi_write_reg(HDMI_WP_VIDEO_TIMING_V, timing_v);
-}
-
-static void hdmi_basic_configure(struct hdmi_config *cfg)
-{
- /* HDMI */
- struct omap_video_timings video_timing;
- struct hdmi_video_format video_format;
- struct hdmi_video_interface video_interface;
- /* HDMI core */
- struct hdmi_core_infoframe_avi avi_cfg;
- struct hdmi_core_video_config v_core_cfg;
- struct hdmi_core_packet_enable_repeat repeat_cfg;
-
- hdmi_wp_init(&video_timing, &video_format,
- &video_interface);
-
- hdmi_core_init(&v_core_cfg,
- &avi_cfg,
- &repeat_cfg);
-
- hdmi_wp_video_init_format(&video_format,
- &video_timing, cfg);
-
- hdmi_wp_video_config_timing(&video_timing);
-
- /* video config */
- video_format.packing_mode = HDMI_PACK_24b_RGB_YUV444_YUV422;
-
- hdmi_wp_video_config_format(&video_format);
-
- video_interface.vsp = cfg->timings.vsync_pol;
- video_interface.hsp = cfg->timings.hsync_pol;
- video_interface.interlacing = cfg->interlace;
- video_interface.tm = 1 ; /* HDMI_TIMING_MASTER_24BIT */
-
- hdmi_wp_video_config_interface(&video_interface);
-
- /*
- * configure core video part
- * set software reset in the core
- */
- hdmi_core_swreset_assert();
-
- /* power down off */
- hdmi_core_powerdown_disable();
-
- v_core_cfg.pkt_mode = HDMI_PACKETMODE24BITPERPIXEL;
- v_core_cfg.hdmi_dvi = cfg->cm.mode;
-
- hdmi_core_video_config(&v_core_cfg);
-
- /* release software reset in the core */
- hdmi_core_swreset_release();
-
- /*
- * configure packet
- * info frame video see doc CEA861-D page 65
- */
- avi_cfg.db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
- avi_cfg.db1_active_info =
- HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
- avi_cfg.db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
- avi_cfg.db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
- avi_cfg.db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
- avi_cfg.db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
- avi_cfg.db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
- avi_cfg.db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
- avi_cfg.db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
- avi_cfg.db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
- avi_cfg.db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
- avi_cfg.db4_videocode = cfg->cm.code;
- avi_cfg.db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
- avi_cfg.db6_7_line_eoftop = 0;
- avi_cfg.db8_9_line_sofbottom = 0;
- avi_cfg.db10_11_pixel_eofleft = 0;
- avi_cfg.db12_13_pixel_sofright = 0;
-
- hdmi_core_aux_infoframe_avi_config(avi_cfg);
-
- /* enable/repeat the infoframe */
- repeat_cfg.avi_infoframe = HDMI_PACKETENABLE;
- repeat_cfg.avi_infoframe_repeat = HDMI_PACKETREPEATON;
- /* wakeup */
- repeat_cfg.audio_pkt = HDMI_PACKETENABLE;
- repeat_cfg.audio_pkt_repeat = HDMI_PACKETREPEATON;
- hdmi_core_av_packet_config(repeat_cfg);
-}
-
static void update_hdmi_timings(struct hdmi_config *cfg,
struct omap_video_timings *timings, int code)
{
@@ -1066,6 +266,12 @@
cfg->timings.hsync_pol = cea_vesa_timings[code].hsync_pol;
}
+unsigned long hdmi_get_pixel_clock(void)
+{
+ /* HDMI Pixel Clock in Mhz */
+ return hdmi.ip_data.cfg.timings.timings.pixel_clock * 10000;
+}
+
static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
struct hdmi_pll_info *pi)
{
@@ -1077,15 +283,23 @@
* Input clock is predivided by N + 1
* out put of which is reference clk
*/
- pi->regn = dssdev->clocks.hdmi.regn;
- refclk = clkin / (pi->regn + 1);
+ if (dssdev->clocks.hdmi.regn == 0)
+ pi->regn = HDMI_DEFAULT_REGN;
+ else
+ pi->regn = dssdev->clocks.hdmi.regn;
+
+ refclk = clkin / pi->regn;
/*
* multiplier is pixel_clk/ref_clk
* Multiplying by 100 to avoid fractional part removal
*/
pi->regm = (phy * 100 / (refclk)) / 100;
- pi->regm2 = dssdev->clocks.hdmi.regm2;
+
+ if (dssdev->clocks.hdmi.regm2 == 0)
+ pi->regm2 = HDMI_DEFAULT_REGM2;
+ else
+ pi->regm2 = dssdev->clocks.hdmi.regm2;
/*
* fractional multiplier is remainder of the difference between
@@ -1100,7 +314,10 @@
* is greater than 1000MHz
*/
pi->dcofreq = phy > 1000 * 100;
- pi->regsd = ((pi->regm * clkin / 10) / ((pi->regn + 1) * 250) + 5) / 10;
+ pi->regsd = ((pi->regm * clkin / 10) / (pi->regn * 250) + 5) / 10;
+
+ /* Set the reference clock to sysclk reference */
+ pi->refsel = HDMI_REFSEL_SYSCLK;
DSSDBG("M = %d Mf = %d\n", pi->regm, pi->regmf);
DSSDBG("range = %d sd = %d\n", pi->dcofreq, pi->regsd);
@@ -1109,7 +326,6 @@
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r, code = 0;
- struct hdmi_pll_info pll_data;
struct omap_video_timings *p;
unsigned long phy;
@@ -1117,7 +333,7 @@
if (r)
return r;
- dispc_enable_channel(OMAP_DSS_CHANNEL_DIGIT, 0);
+ dispc_mgr_enable(OMAP_DSS_CHANNEL_DIGIT, 0);
p = &dssdev->panel.timings;
@@ -1125,36 +341,31 @@
dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
- if (!hdmi.custom_set) {
- DSSDBG("Read EDID as no EDID is not set on poweron\n");
- hdmi_read_edid(p);
- }
code = get_timings_index();
- dssdev->panel.timings = cea_vesa_timings[code].timings;
- update_hdmi_timings(&hdmi.cfg, p, code);
+ update_hdmi_timings(&hdmi.ip_data.cfg, p, code);
phy = p->pixel_clock;
- hdmi_compute_pll(dssdev, phy, &pll_data);
+ hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
- hdmi_wp_video_start(0);
+ hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
- /* config the PLL and PHY first */
- r = hdmi_pll_program(&pll_data);
+ /* config the PLL and PHY hdmi_set_pll_pwrfirst */
+ r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to lock PLL\n");
goto err;
}
- r = hdmi_phy_init();
+ r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err;
}
- hdmi.cfg.cm.mode = hdmi.mode;
- hdmi.cfg.cm.code = hdmi.code;
- hdmi_basic_configure(&hdmi.cfg);
+ hdmi.ip_data.cfg.cm.mode = hdmi.mode;
+ hdmi.ip_data.cfg.cm.code = hdmi.code;
+ hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
@@ -1174,9 +385,9 @@
dispc_set_digit_size(dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
- dispc_enable_channel(OMAP_DSS_CHANNEL_DIGIT, 1);
+ hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 1);
- hdmi_wp_video_start(1);
+ dispc_mgr_enable(OMAP_DSS_CHANNEL_DIGIT, 1);
return 0;
err:
@@ -1186,14 +397,12 @@
static void hdmi_power_off(struct omap_dss_device *dssdev)
{
- dispc_enable_channel(OMAP_DSS_CHANNEL_DIGIT, 0);
+ dispc_mgr_enable(OMAP_DSS_CHANNEL_DIGIT, 0);
- hdmi_wp_video_start(0);
- hdmi_phy_off();
- hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF);
+ hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
+ hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
+ hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
hdmi_runtime_put();
-
- hdmi.edid_set = 0;
}
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
@@ -1203,7 +412,6 @@
cm = hdmi_get_code(timings);
if (cm.code == -1) {
- DSSERR("Invalid timing entered\n");
return -EINVAL;
}
@@ -1215,12 +423,69 @@
{
struct hdmi_cm cm;
- hdmi.custom_set = 1;
cm = hdmi_get_code(&dssdev->panel.timings);
hdmi.code = cm.code;
hdmi.mode = cm.mode;
- omapdss_hdmi_display_enable(dssdev);
- hdmi.custom_set = 0;
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+ int r;
+
+ hdmi_power_off(dssdev);
+
+ r = hdmi_power_on(dssdev);
+ if (r)
+ DSSERR("failed to power on device\n");
+ }
+}
+
+void hdmi_dump_regs(struct seq_file *s)
+{
+ mutex_lock(&hdmi.lock);
+
+ if (hdmi_runtime_get())
+ return;
+
+ hdmi.ip_data.ops->dump_wrapper(&hdmi.ip_data, s);
+ hdmi.ip_data.ops->dump_pll(&hdmi.ip_data, s);
+ hdmi.ip_data.ops->dump_phy(&hdmi.ip_data, s);
+ hdmi.ip_data.ops->dump_core(&hdmi.ip_data, s);
+
+ hdmi_runtime_put();
+ mutex_unlock(&hdmi.lock);
+}
+
+int omapdss_hdmi_read_edid(u8 *buf, int len)
+{
+ int r;
+
+ mutex_lock(&hdmi.lock);
+
+ r = hdmi_runtime_get();
+ BUG_ON(r);
+
+ r = hdmi.ip_data.ops->read_edid(&hdmi.ip_data, buf, len);
+
+ hdmi_runtime_put();
+ mutex_unlock(&hdmi.lock);
+
+ return r;
+}
+
+bool omapdss_hdmi_detect(void)
+{
+ int r;
+
+ mutex_lock(&hdmi.lock);
+
+ r = hdmi_runtime_get();
+ BUG_ON(r);
+
+ r = hdmi.ip_data.ops->detect(&hdmi.ip_data);
+
+ hdmi_runtime_put();
+ mutex_unlock(&hdmi.lock);
+
+ return r == 1;
}
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
@@ -1231,6 +496,12 @@
mutex_lock(&hdmi.lock);
+ if (dssdev->manager == NULL) {
+ DSSERR("failed to enable display: no manager\n");
+ r = -ENODEV;
+ goto err0;
+ }
+
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
@@ -1282,219 +553,9 @@
#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
-static void hdmi_wp_audio_config_format(
- struct hdmi_audio_format *aud_fmt)
-{
- u32 r;
- DSSDBG("Enter hdmi_wp_audio_config_format\n");
-
- r = hdmi_read_reg(HDMI_WP_AUDIO_CFG);
- r = FLD_MOD(r, aud_fmt->stereo_channels, 26, 24);
- r = FLD_MOD(r, aud_fmt->active_chnnls_msk, 23, 16);
- r = FLD_MOD(r, aud_fmt->en_sig_blk_strt_end, 5, 5);
- r = FLD_MOD(r, aud_fmt->type, 4, 4);
- r = FLD_MOD(r, aud_fmt->justification, 3, 3);
- r = FLD_MOD(r, aud_fmt->sample_order, 2, 2);
- r = FLD_MOD(r, aud_fmt->samples_per_word, 1, 1);
- r = FLD_MOD(r, aud_fmt->sample_size, 0, 0);
- hdmi_write_reg(HDMI_WP_AUDIO_CFG, r);
-}
-
-static void hdmi_wp_audio_config_dma(struct hdmi_audio_dma *aud_dma)
-{
- u32 r;
-
- DSSDBG("Enter hdmi_wp_audio_config_dma\n");
-
- r = hdmi_read_reg(HDMI_WP_AUDIO_CFG2);
- r = FLD_MOD(r, aud_dma->transfer_size, 15, 8);
- r = FLD_MOD(r, aud_dma->block_size, 7, 0);
- hdmi_write_reg(HDMI_WP_AUDIO_CFG2, r);
-
- r = hdmi_read_reg(HDMI_WP_AUDIO_CTRL);
- r = FLD_MOD(r, aud_dma->mode, 9, 9);
- r = FLD_MOD(r, aud_dma->fifo_threshold, 8, 0);
- hdmi_write_reg(HDMI_WP_AUDIO_CTRL, r);
-}
-
-static void hdmi_core_audio_config(struct hdmi_core_audio_config *cfg)
-{
- u32 r;
-
- /* audio clock recovery parameters */
- r = hdmi_read_reg(HDMI_CORE_AV_ACR_CTRL);
- r = FLD_MOD(r, cfg->use_mclk, 2, 2);
- r = FLD_MOD(r, cfg->en_acr_pkt, 1, 1);
- r = FLD_MOD(r, cfg->cts_mode, 0, 0);
- hdmi_write_reg(HDMI_CORE_AV_ACR_CTRL, r);
-
- REG_FLD_MOD(HDMI_CORE_AV_N_SVAL1, cfg->n, 7, 0);
- REG_FLD_MOD(HDMI_CORE_AV_N_SVAL2, cfg->n >> 8, 7, 0);
- REG_FLD_MOD(HDMI_CORE_AV_N_SVAL3, cfg->n >> 16, 7, 0);
-
- if (cfg->cts_mode == HDMI_AUDIO_CTS_MODE_SW) {
- REG_FLD_MOD(HDMI_CORE_AV_CTS_SVAL1, cfg->cts, 7, 0);
- REG_FLD_MOD(HDMI_CORE_AV_CTS_SVAL2, cfg->cts >> 8, 7, 0);
- REG_FLD_MOD(HDMI_CORE_AV_CTS_SVAL3, cfg->cts >> 16, 7, 0);
- } else {
- /*
- * HDMI IP uses this configuration to divide the MCLK to
- * update CTS value.
- */
- REG_FLD_MOD(HDMI_CORE_AV_FREQ_SVAL, cfg->mclk_mode, 2, 0);
-
- /* Configure clock for audio packets */
- REG_FLD_MOD(HDMI_CORE_AV_AUD_PAR_BUSCLK_1,
- cfg->aud_par_busclk, 7, 0);
- REG_FLD_MOD(HDMI_CORE_AV_AUD_PAR_BUSCLK_2,
- (cfg->aud_par_busclk >> 8), 7, 0);
- REG_FLD_MOD(HDMI_CORE_AV_AUD_PAR_BUSCLK_3,
- (cfg->aud_par_busclk >> 16), 7, 0);
- }
-
- /* Override of SPDIF sample frequency with value in I2S_CHST4 */
- REG_FLD_MOD(HDMI_CORE_AV_SPDIF_CTRL, cfg->fs_override, 1, 1);
-
- /* I2S parameters */
- REG_FLD_MOD(HDMI_CORE_AV_I2S_CHST4, cfg->freq_sample, 3, 0);
-
- r = hdmi_read_reg(HDMI_CORE_AV_I2S_IN_CTRL);
- r = FLD_MOD(r, cfg->i2s_cfg.en_high_bitrate_aud, 7, 7);
- r = FLD_MOD(r, cfg->i2s_cfg.sck_edge_mode, 6, 6);
- r = FLD_MOD(r, cfg->i2s_cfg.cbit_order, 5, 5);
- r = FLD_MOD(r, cfg->i2s_cfg.vbit, 4, 4);
- r = FLD_MOD(r, cfg->i2s_cfg.ws_polarity, 3, 3);
- r = FLD_MOD(r, cfg->i2s_cfg.justification, 2, 2);
- r = FLD_MOD(r, cfg->i2s_cfg.direction, 1, 1);
- r = FLD_MOD(r, cfg->i2s_cfg.shift, 0, 0);
- hdmi_write_reg(HDMI_CORE_AV_I2S_IN_CTRL, r);
-
- r = hdmi_read_reg(HDMI_CORE_AV_I2S_CHST5);
- r = FLD_MOD(r, cfg->freq_sample, 7, 4);
- r = FLD_MOD(r, cfg->i2s_cfg.word_length, 3, 1);
- r = FLD_MOD(r, cfg->i2s_cfg.word_max_length, 0, 0);
- hdmi_write_reg(HDMI_CORE_AV_I2S_CHST5, r);
-
- REG_FLD_MOD(HDMI_CORE_AV_I2S_IN_LEN, cfg->i2s_cfg.in_length_bits, 3, 0);
-
- /* Audio channels and mode parameters */
- REG_FLD_MOD(HDMI_CORE_AV_HDMI_CTRL, cfg->layout, 2, 1);
- r = hdmi_read_reg(HDMI_CORE_AV_AUD_MODE);
- r = FLD_MOD(r, cfg->i2s_cfg.active_sds, 7, 4);
- r = FLD_MOD(r, cfg->en_dsd_audio, 3, 3);
- r = FLD_MOD(r, cfg->en_parallel_aud_input, 2, 2);
- r = FLD_MOD(r, cfg->en_spdif, 1, 1);
- hdmi_write_reg(HDMI_CORE_AV_AUD_MODE, r);
-}
-
-static void hdmi_core_audio_infoframe_config(
- struct hdmi_core_infoframe_audio *info_aud)
-{
- u8 val;
- u8 sum = 0, checksum = 0;
-
- /*
- * Set audio info frame type, version and length as
- * described in HDMI 1.4a Section 8.2.2 specification.
- * Checksum calculation is defined in Section 5.3.5.
- */
- hdmi_write_reg(HDMI_CORE_AV_AUDIO_TYPE, 0x84);
- hdmi_write_reg(HDMI_CORE_AV_AUDIO_VERS, 0x01);
- hdmi_write_reg(HDMI_CORE_AV_AUDIO_LEN, 0x0a);
- sum += 0x84 + 0x001 + 0x00a;
-
- val = (info_aud->db1_coding_type << 4)
- | (info_aud->db1_channel_count - 1);
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(0), val);
- sum += val;
-
- val = (info_aud->db2_sample_freq << 2) | info_aud->db2_sample_size;
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(1), val);
- sum += val;
-
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(2), 0x00);
-
- val = info_aud->db4_channel_alloc;
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(3), val);
- sum += val;
-
- val = (info_aud->db5_downmix_inh << 7) | (info_aud->db5_lsv << 3);
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(4), val);
- sum += val;
-
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(5), 0x00);
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(6), 0x00);
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(7), 0x00);
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(8), 0x00);
- hdmi_write_reg(HDMI_CORE_AV_AUD_DBYTE(9), 0x00);
-
- checksum = 0x100 - sum;
- hdmi_write_reg(HDMI_CORE_AV_AUDIO_CHSUM, checksum);
-
- /*
- * TODO: Add MPEG and SPD enable and repeat cfg when EDID parsing
- * is available.
- */
-}
-
-static int hdmi_config_audio_acr(u32 sample_freq, u32 *n, u32 *cts)
-{
- u32 r;
- u32 deep_color = 0;
- u32 pclk = hdmi.cfg.timings.timings.pixel_clock;
-
- if (n == NULL || cts == NULL)
- return -EINVAL;
- /*
- * Obtain current deep color configuration. This needed
- * to calculate the TMDS clock based on the pixel clock.
- */
- r = REG_GET(HDMI_WP_VIDEO_CFG, 1, 0);
- switch (r) {
- case 1: /* No deep color selected */
- deep_color = 100;
- break;
- case 2: /* 10-bit deep color selected */
- deep_color = 125;
- break;
- case 3: /* 12-bit deep color selected */
- deep_color = 150;
- break;
- default:
- return -EINVAL;
- }
-
- switch (sample_freq) {
- case 32000:
- if ((deep_color == 125) && ((pclk == 54054)
- || (pclk == 74250)))
- *n = 8192;
- else
- *n = 4096;
- break;
- case 44100:
- *n = 6272;
- break;
- case 48000:
- if ((deep_color == 125) && ((pclk == 54054)
- || (pclk == 74250)))
- *n = 8192;
- else
- *n = 6144;
- break;
- default:
- *n = 0;
- return -EINVAL;
- }
-
- /* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
- *cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
-
- return 0;
-}
-
-static int hdmi_audio_hw_params(struct snd_pcm_substream *substream,
+static int hdmi_audio_hw_params(struct hdmi_ip_data *ip_data,
+ struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
@@ -1548,7 +609,7 @@
return -EINVAL;
}
- err = hdmi_config_audio_acr(params_rate(params), &n, &cts);
+ err = hdmi_config_audio_acr(ip_data, params_rate(params), &n, &cts);
if (err < 0)
return err;
@@ -1564,8 +625,8 @@
audio_dma.mode = HDMI_AUDIO_TRANSF_DMA;
audio_dma.fifo_threshold = 0x20; /* in number of samples */
- hdmi_wp_audio_config_dma(&audio_dma);
- hdmi_wp_audio_config_format(&audio_format);
+ hdmi_wp_audio_config_dma(ip_data, &audio_dma);
+ hdmi_wp_audio_config_format(ip_data, &audio_format);
/*
* I2S config
@@ -1609,7 +670,7 @@
/* Use parallel audio interface */
core_cfg.en_parallel_aud_input = true;
- hdmi_core_audio_config(&core_cfg);
+ hdmi_core_audio_config(ip_data, &core_cfg);
/*
* Configure packet
@@ -1623,36 +684,10 @@
aud_if_cfg.db5_downmix_inh = false;
aud_if_cfg.db5_lsv = 0;
- hdmi_core_audio_infoframe_config(&aud_if_cfg);
+ hdmi_core_audio_infoframe_config(ip_data, &aud_if_cfg);
return 0;
}
-static int hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
-{
- int err = 0;
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- REG_FLD_MOD(HDMI_CORE_AV_AUD_MODE, 1, 0, 0);
- REG_FLD_MOD(HDMI_WP_AUDIO_CTRL, 1, 31, 31);
- REG_FLD_MOD(HDMI_WP_AUDIO_CTRL, 1, 30, 30);
- break;
-
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- REG_FLD_MOD(HDMI_CORE_AV_AUD_MODE, 0, 0, 0);
- REG_FLD_MOD(HDMI_WP_AUDIO_CTRL, 0, 30, 30);
- REG_FLD_MOD(HDMI_WP_AUDIO_CTRL, 0, 31, 31);
- break;
- default:
- err = -EINVAL;
- }
- return err;
-}
-
static int hdmi_audio_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -1698,15 +733,6 @@
hdmi.sys_clk = clk;
- clk = clk_get(&pdev->dev, "dss_48mhz_clk");
- if (IS_ERR(clk)) {
- DSSERR("can't get hdmi_clk\n");
- clk_put(hdmi.sys_clk);
- return PTR_ERR(clk);
- }
-
- hdmi.hdmi_clk = clk;
-
return 0;
}
@@ -1714,8 +740,6 @@
{
if (hdmi.sys_clk)
clk_put(hdmi.sys_clk);
- if (hdmi.hdmi_clk)
- clk_put(hdmi.hdmi_clk);
}
/* HDMI HW IP initialisation */
@@ -1736,20 +760,26 @@
}
/* Base address taken from platform */
- hdmi.base_wp = ioremap(hdmi_mem->start, resource_size(hdmi_mem));
- if (!hdmi.base_wp) {
+ hdmi.ip_data.base_wp = ioremap(hdmi_mem->start,
+ resource_size(hdmi_mem));
+ if (!hdmi.ip_data.base_wp) {
DSSERR("can't ioremap WP\n");
return -ENOMEM;
}
r = hdmi_get_clocks(pdev);
if (r) {
- iounmap(hdmi.base_wp);
+ iounmap(hdmi.ip_data.base_wp);
return r;
}
pm_runtime_enable(&pdev->dev);
+ hdmi.ip_data.core_sys_offset = HDMI_CORE_SYS;
+ hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
+ hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
+ hdmi.ip_data.phy_offset = HDMI_PHY;
+
hdmi_panel_init();
#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
@@ -1779,14 +809,13 @@
hdmi_put_clocks();
- iounmap(hdmi.base_wp);
+ iounmap(hdmi.ip_data.base_wp);
return 0;
}
static int hdmi_runtime_suspend(struct device *dev)
{
- clk_disable(hdmi.hdmi_clk);
clk_disable(hdmi.sys_clk);
dispc_runtime_put();
@@ -1809,7 +838,6 @@
clk_enable(hdmi.sys_clk);
- clk_enable(hdmi.hdmi_clk);
return 0;
diff --git a/drivers/video/omap2/dss/hdmi.h b/drivers/video/omap2/dss/hdmi.h
deleted file mode 100644
index c885f9c..0000000
--- a/drivers/video/omap2/dss/hdmi.h
+++ /dev/null
@@ -1,631 +0,0 @@
-/*
- * hdmi.h
- *
- * HDMI driver definition for TI OMAP4 processors.
- *
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _OMAP4_DSS_HDMI_H_
-#define _OMAP4_DSS_HDMI_H_
-
-#include <linux/string.h>
-#include <video/omapdss.h>
-
-#define HDMI_WP 0x0
-#define HDMI_CORE_SYS 0x400
-#define HDMI_CORE_AV 0x900
-#define HDMI_PLLCTRL 0x200
-#define HDMI_PHY 0x300
-
-struct hdmi_reg { u16 idx; };
-
-#define HDMI_REG(idx) ((const struct hdmi_reg) { idx })
-
-/* HDMI Wrapper */
-#define HDMI_WP_REG(idx) HDMI_REG(HDMI_WP + idx)
-
-#define HDMI_WP_REVISION HDMI_WP_REG(0x0)
-#define HDMI_WP_SYSCONFIG HDMI_WP_REG(0x10)
-#define HDMI_WP_IRQSTATUS_RAW HDMI_WP_REG(0x24)
-#define HDMI_WP_IRQSTATUS HDMI_WP_REG(0x28)
-#define HDMI_WP_PWR_CTRL HDMI_WP_REG(0x40)
-#define HDMI_WP_IRQENABLE_SET HDMI_WP_REG(0x2C)
-#define HDMI_WP_VIDEO_CFG HDMI_WP_REG(0x50)
-#define HDMI_WP_VIDEO_SIZE HDMI_WP_REG(0x60)
-#define HDMI_WP_VIDEO_TIMING_H HDMI_WP_REG(0x68)
-#define HDMI_WP_VIDEO_TIMING_V HDMI_WP_REG(0x6C)
-#define HDMI_WP_WP_CLK HDMI_WP_REG(0x70)
-#define HDMI_WP_AUDIO_CFG HDMI_WP_REG(0x80)
-#define HDMI_WP_AUDIO_CFG2 HDMI_WP_REG(0x84)
-#define HDMI_WP_AUDIO_CTRL HDMI_WP_REG(0x88)
-#define HDMI_WP_AUDIO_DATA HDMI_WP_REG(0x8C)
-
-/* HDMI IP Core System */
-#define HDMI_CORE_SYS_REG(idx) HDMI_REG(HDMI_CORE_SYS + idx)
-
-#define HDMI_CORE_SYS_VND_IDL HDMI_CORE_SYS_REG(0x0)
-#define HDMI_CORE_SYS_DEV_IDL HDMI_CORE_SYS_REG(0x8)
-#define HDMI_CORE_SYS_DEV_IDH HDMI_CORE_SYS_REG(0xC)
-#define HDMI_CORE_SYS_DEV_REV HDMI_CORE_SYS_REG(0x10)
-#define HDMI_CORE_SYS_SRST HDMI_CORE_SYS_REG(0x14)
-#define HDMI_CORE_CTRL1 HDMI_CORE_SYS_REG(0x20)
-#define HDMI_CORE_SYS_SYS_STAT HDMI_CORE_SYS_REG(0x24)
-#define HDMI_CORE_SYS_VID_ACEN HDMI_CORE_SYS_REG(0x124)
-#define HDMI_CORE_SYS_VID_MODE HDMI_CORE_SYS_REG(0x128)
-#define HDMI_CORE_SYS_INTR_STATE HDMI_CORE_SYS_REG(0x1C0)
-#define HDMI_CORE_SYS_INTR1 HDMI_CORE_SYS_REG(0x1C4)
-#define HDMI_CORE_SYS_INTR2 HDMI_CORE_SYS_REG(0x1C8)
-#define HDMI_CORE_SYS_INTR3 HDMI_CORE_SYS_REG(0x1CC)
-#define HDMI_CORE_SYS_INTR4 HDMI_CORE_SYS_REG(0x1D0)
-#define HDMI_CORE_SYS_UMASK1 HDMI_CORE_SYS_REG(0x1D4)
-#define HDMI_CORE_SYS_TMDS_CTRL HDMI_CORE_SYS_REG(0x208)
-#define HDMI_CORE_SYS_DE_DLY HDMI_CORE_SYS_REG(0xC8)
-#define HDMI_CORE_SYS_DE_CTRL HDMI_CORE_SYS_REG(0xCC)
-#define HDMI_CORE_SYS_DE_TOP HDMI_CORE_SYS_REG(0xD0)
-#define HDMI_CORE_SYS_DE_CNTL HDMI_CORE_SYS_REG(0xD8)
-#define HDMI_CORE_SYS_DE_CNTH HDMI_CORE_SYS_REG(0xDC)
-#define HDMI_CORE_SYS_DE_LINL HDMI_CORE_SYS_REG(0xE0)
-#define HDMI_CORE_SYS_DE_LINH_1 HDMI_CORE_SYS_REG(0xE4)
-#define HDMI_CORE_CTRL1_VEN_FOLLOWVSYNC 0x1
-#define HDMI_CORE_CTRL1_HEN_FOLLOWHSYNC 0x1
-#define HDMI_CORE_CTRL1_BSEL_24BITBUS 0x1
-#define HDMI_CORE_CTRL1_EDGE_RISINGEDGE 0x1
-
-/* HDMI DDC E-DID */
-#define HDMI_CORE_DDC_CMD HDMI_CORE_SYS_REG(0x3CC)
-#define HDMI_CORE_DDC_STATUS HDMI_CORE_SYS_REG(0x3C8)
-#define HDMI_CORE_DDC_ADDR HDMI_CORE_SYS_REG(0x3B4)
-#define HDMI_CORE_DDC_OFFSET HDMI_CORE_SYS_REG(0x3BC)
-#define HDMI_CORE_DDC_COUNT1 HDMI_CORE_SYS_REG(0x3C0)
-#define HDMI_CORE_DDC_COUNT2 HDMI_CORE_SYS_REG(0x3C4)
-#define HDMI_CORE_DDC_DATA HDMI_CORE_SYS_REG(0x3D0)
-#define HDMI_CORE_DDC_SEGM HDMI_CORE_SYS_REG(0x3B8)
-
-/* HDMI IP Core Audio Video */
-#define HDMI_CORE_AV_REG(idx) HDMI_REG(HDMI_CORE_AV + idx)
-
-#define HDMI_CORE_AV_HDMI_CTRL HDMI_CORE_AV_REG(0xBC)
-#define HDMI_CORE_AV_DPD HDMI_CORE_AV_REG(0xF4)
-#define HDMI_CORE_AV_PB_CTRL1 HDMI_CORE_AV_REG(0xF8)
-#define HDMI_CORE_AV_PB_CTRL2 HDMI_CORE_AV_REG(0xFC)
-#define HDMI_CORE_AV_AVI_TYPE HDMI_CORE_AV_REG(0x100)
-#define HDMI_CORE_AV_AVI_VERS HDMI_CORE_AV_REG(0x104)
-#define HDMI_CORE_AV_AVI_LEN HDMI_CORE_AV_REG(0x108)
-#define HDMI_CORE_AV_AVI_CHSUM HDMI_CORE_AV_REG(0x10C)
-#define HDMI_CORE_AV_AVI_DBYTE(n) HDMI_CORE_AV_REG(n * 4 + 0x110)
-#define HDMI_CORE_AV_AVI_DBYTE_NELEMS HDMI_CORE_AV_REG(15)
-#define HDMI_CORE_AV_SPD_DBYTE HDMI_CORE_AV_REG(0x190)
-#define HDMI_CORE_AV_SPD_DBYTE_NELEMS HDMI_CORE_AV_REG(27)
-#define HDMI_CORE_AV_AUD_DBYTE(n) HDMI_CORE_AV_REG(n * 4 + 0x210)
-#define HDMI_CORE_AV_AUD_DBYTE_NELEMS HDMI_CORE_AV_REG(10)
-#define HDMI_CORE_AV_MPEG_DBYTE HDMI_CORE_AV_REG(0x290)
-#define HDMI_CORE_AV_MPEG_DBYTE_NELEMS HDMI_CORE_AV_REG(27)
-#define HDMI_CORE_AV_GEN_DBYTE HDMI_CORE_AV_REG(0x300)
-#define HDMI_CORE_AV_GEN_DBYTE_NELEMS HDMI_CORE_AV_REG(31)
-#define HDMI_CORE_AV_GEN2_DBYTE HDMI_CORE_AV_REG(0x380)
-#define HDMI_CORE_AV_GEN2_DBYTE_NELEMS HDMI_CORE_AV_REG(31)
-#define HDMI_CORE_AV_ACR_CTRL HDMI_CORE_AV_REG(0x4)
-#define HDMI_CORE_AV_FREQ_SVAL HDMI_CORE_AV_REG(0x8)
-#define HDMI_CORE_AV_N_SVAL1 HDMI_CORE_AV_REG(0xC)
-#define HDMI_CORE_AV_N_SVAL2 HDMI_CORE_AV_REG(0x10)
-#define HDMI_CORE_AV_N_SVAL3 HDMI_CORE_AV_REG(0x14)
-#define HDMI_CORE_AV_CTS_SVAL1 HDMI_CORE_AV_REG(0x18)
-#define HDMI_CORE_AV_CTS_SVAL2 HDMI_CORE_AV_REG(0x1C)
-#define HDMI_CORE_AV_CTS_SVAL3 HDMI_CORE_AV_REG(0x20)
-#define HDMI_CORE_AV_CTS_HVAL1 HDMI_CORE_AV_REG(0x24)
-#define HDMI_CORE_AV_CTS_HVAL2 HDMI_CORE_AV_REG(0x28)
-#define HDMI_CORE_AV_CTS_HVAL3 HDMI_CORE_AV_REG(0x2C)
-#define HDMI_CORE_AV_AUD_MODE HDMI_CORE_AV_REG(0x50)
-#define HDMI_CORE_AV_SPDIF_CTRL HDMI_CORE_AV_REG(0x54)
-#define HDMI_CORE_AV_HW_SPDIF_FS HDMI_CORE_AV_REG(0x60)
-#define HDMI_CORE_AV_SWAP_I2S HDMI_CORE_AV_REG(0x64)
-#define HDMI_CORE_AV_SPDIF_ERTH HDMI_CORE_AV_REG(0x6C)
-#define HDMI_CORE_AV_I2S_IN_MAP HDMI_CORE_AV_REG(0x70)
-#define HDMI_CORE_AV_I2S_IN_CTRL HDMI_CORE_AV_REG(0x74)
-#define HDMI_CORE_AV_I2S_CHST0 HDMI_CORE_AV_REG(0x78)
-#define HDMI_CORE_AV_I2S_CHST1 HDMI_CORE_AV_REG(0x7C)
-#define HDMI_CORE_AV_I2S_CHST2 HDMI_CORE_AV_REG(0x80)
-#define HDMI_CORE_AV_I2S_CHST4 HDMI_CORE_AV_REG(0x84)
-#define HDMI_CORE_AV_I2S_CHST5 HDMI_CORE_AV_REG(0x88)
-#define HDMI_CORE_AV_ASRC HDMI_CORE_AV_REG(0x8C)
-#define HDMI_CORE_AV_I2S_IN_LEN HDMI_CORE_AV_REG(0x90)
-#define HDMI_CORE_AV_HDMI_CTRL HDMI_CORE_AV_REG(0xBC)
-#define HDMI_CORE_AV_AUDO_TXSTAT HDMI_CORE_AV_REG(0xC0)
-#define HDMI_CORE_AV_AUD_PAR_BUSCLK_1 HDMI_CORE_AV_REG(0xCC)
-#define HDMI_CORE_AV_AUD_PAR_BUSCLK_2 HDMI_CORE_AV_REG(0xD0)
-#define HDMI_CORE_AV_AUD_PAR_BUSCLK_3 HDMI_CORE_AV_REG(0xD4)
-#define HDMI_CORE_AV_TEST_TXCTRL HDMI_CORE_AV_REG(0xF0)
-#define HDMI_CORE_AV_DPD HDMI_CORE_AV_REG(0xF4)
-#define HDMI_CORE_AV_PB_CTRL1 HDMI_CORE_AV_REG(0xF8)
-#define HDMI_CORE_AV_PB_CTRL2 HDMI_CORE_AV_REG(0xFC)
-#define HDMI_CORE_AV_AVI_TYPE HDMI_CORE_AV_REG(0x100)
-#define HDMI_CORE_AV_AVI_VERS HDMI_CORE_AV_REG(0x104)
-#define HDMI_CORE_AV_AVI_LEN HDMI_CORE_AV_REG(0x108)
-#define HDMI_CORE_AV_AVI_CHSUM HDMI_CORE_AV_REG(0x10C)
-#define HDMI_CORE_AV_SPD_TYPE HDMI_CORE_AV_REG(0x180)
-#define HDMI_CORE_AV_SPD_VERS HDMI_CORE_AV_REG(0x184)
-#define HDMI_CORE_AV_SPD_LEN HDMI_CORE_AV_REG(0x188)
-#define HDMI_CORE_AV_SPD_CHSUM HDMI_CORE_AV_REG(0x18C)
-#define HDMI_CORE_AV_AUDIO_TYPE HDMI_CORE_AV_REG(0x200)
-#define HDMI_CORE_AV_AUDIO_VERS HDMI_CORE_AV_REG(0x204)
-#define HDMI_CORE_AV_AUDIO_LEN HDMI_CORE_AV_REG(0x208)
-#define HDMI_CORE_AV_AUDIO_CHSUM HDMI_CORE_AV_REG(0x20C)
-#define HDMI_CORE_AV_MPEG_TYPE HDMI_CORE_AV_REG(0x280)
-#define HDMI_CORE_AV_MPEG_VERS HDMI_CORE_AV_REG(0x284)
-#define HDMI_CORE_AV_MPEG_LEN HDMI_CORE_AV_REG(0x288)
-#define HDMI_CORE_AV_MPEG_CHSUM HDMI_CORE_AV_REG(0x28C)
-#define HDMI_CORE_AV_CP_BYTE1 HDMI_CORE_AV_REG(0x37C)
-#define HDMI_CORE_AV_CEC_ADDR_ID HDMI_CORE_AV_REG(0x3FC)
-#define HDMI_CORE_AV_SPD_DBYTE_ELSIZE 0x4
-#define HDMI_CORE_AV_GEN2_DBYTE_ELSIZE 0x4
-#define HDMI_CORE_AV_MPEG_DBYTE_ELSIZE 0x4
-#define HDMI_CORE_AV_GEN_DBYTE_ELSIZE 0x4
-
-/* PLL */
-#define HDMI_PLL_REG(idx) HDMI_REG(HDMI_PLLCTRL + idx)
-
-#define PLLCTRL_PLL_CONTROL HDMI_PLL_REG(0x0)
-#define PLLCTRL_PLL_STATUS HDMI_PLL_REG(0x4)
-#define PLLCTRL_PLL_GO HDMI_PLL_REG(0x8)
-#define PLLCTRL_CFG1 HDMI_PLL_REG(0xC)
-#define PLLCTRL_CFG2 HDMI_PLL_REG(0x10)
-#define PLLCTRL_CFG3 HDMI_PLL_REG(0x14)
-#define PLLCTRL_CFG4 HDMI_PLL_REG(0x20)
-
-/* HDMI PHY */
-#define HDMI_PHY_REG(idx) HDMI_REG(HDMI_PHY + idx)
-
-#define HDMI_TXPHY_TX_CTRL HDMI_PHY_REG(0x0)
-#define HDMI_TXPHY_DIGITAL_CTRL HDMI_PHY_REG(0x4)
-#define HDMI_TXPHY_POWER_CTRL HDMI_PHY_REG(0x8)
-#define HDMI_TXPHY_PAD_CFG_CTRL HDMI_PHY_REG(0xC)
-
-/* HDMI EDID Length */
-#define HDMI_EDID_MAX_LENGTH 256
-#define EDID_TIMING_DESCRIPTOR_SIZE 0x12
-#define EDID_DESCRIPTOR_BLOCK0_ADDRESS 0x36
-#define EDID_DESCRIPTOR_BLOCK1_ADDRESS 0x80
-#define EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR 4
-#define EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR 4
-
-#define OMAP_HDMI_TIMINGS_NB 34
-
-#define REG_FLD_MOD(idx, val, start, end) \
- hdmi_write_reg(idx, FLD_MOD(hdmi_read_reg(idx), val, start, end))
-#define REG_GET(idx, start, end) \
- FLD_GET(hdmi_read_reg(idx), start, end)
-
-/* HDMI timing structure */
-struct hdmi_timings {
- struct omap_video_timings timings;
- int vsync_pol;
- int hsync_pol;
-};
-
-enum hdmi_phy_pwr {
- HDMI_PHYPWRCMD_OFF = 0,
- HDMI_PHYPWRCMD_LDOON = 1,
- HDMI_PHYPWRCMD_TXON = 2
-};
-
-enum hdmi_pll_pwr {
- HDMI_PLLPWRCMD_ALLOFF = 0,
- HDMI_PLLPWRCMD_PLLONLY = 1,
- HDMI_PLLPWRCMD_BOTHON_ALLCLKS = 2,
- HDMI_PLLPWRCMD_BOTHON_NOPHYCLK = 3
-};
-
-enum hdmi_clk_refsel {
- HDMI_REFSEL_PCLK = 0,
- HDMI_REFSEL_REF1 = 1,
- HDMI_REFSEL_REF2 = 2,
- HDMI_REFSEL_SYSCLK = 3
-};
-
-enum hdmi_core_inputbus_width {
- HDMI_INPUT_8BIT = 0,
- HDMI_INPUT_10BIT = 1,
- HDMI_INPUT_12BIT = 2
-};
-
-enum hdmi_core_dither_trunc {
- HDMI_OUTPUTTRUNCATION_8BIT = 0,
- HDMI_OUTPUTTRUNCATION_10BIT = 1,
- HDMI_OUTPUTTRUNCATION_12BIT = 2,
- HDMI_OUTPUTDITHER_8BIT = 3,
- HDMI_OUTPUTDITHER_10BIT = 4,
- HDMI_OUTPUTDITHER_12BIT = 5
-};
-
-enum hdmi_core_deepcolor_ed {
- HDMI_DEEPCOLORPACKECTDISABLE = 0,
- HDMI_DEEPCOLORPACKECTENABLE = 1
-};
-
-enum hdmi_core_packet_mode {
- HDMI_PACKETMODERESERVEDVALUE = 0,
- HDMI_PACKETMODE24BITPERPIXEL = 4,
- HDMI_PACKETMODE30BITPERPIXEL = 5,
- HDMI_PACKETMODE36BITPERPIXEL = 6,
- HDMI_PACKETMODE48BITPERPIXEL = 7
-};
-
-enum hdmi_core_hdmi_dvi {
- HDMI_DVI = 0,
- HDMI_HDMI = 1
-};
-
-enum hdmi_core_tclkselclkmult {
- HDMI_FPLL05IDCK = 0,
- HDMI_FPLL10IDCK = 1,
- HDMI_FPLL20IDCK = 2,
- HDMI_FPLL40IDCK = 3
-};
-
-enum hdmi_core_packet_ctrl {
- HDMI_PACKETENABLE = 1,
- HDMI_PACKETDISABLE = 0,
- HDMI_PACKETREPEATON = 1,
- HDMI_PACKETREPEATOFF = 0
-};
-
-/* INFOFRAME_AVI_ and INFOFRAME_AUDIO_ definitions */
-enum hdmi_core_infoframe {
- HDMI_INFOFRAME_AVI_DB1Y_RGB = 0,
- HDMI_INFOFRAME_AVI_DB1Y_YUV422 = 1,
- HDMI_INFOFRAME_AVI_DB1Y_YUV444 = 2,
- HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF = 0,
- HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_ON = 1,
- HDMI_INFOFRAME_AVI_DB1B_NO = 0,
- HDMI_INFOFRAME_AVI_DB1B_VERT = 1,
- HDMI_INFOFRAME_AVI_DB1B_HORI = 2,
- HDMI_INFOFRAME_AVI_DB1B_VERTHORI = 3,
- HDMI_INFOFRAME_AVI_DB1S_0 = 0,
- HDMI_INFOFRAME_AVI_DB1S_1 = 1,
- HDMI_INFOFRAME_AVI_DB1S_2 = 2,
- HDMI_INFOFRAME_AVI_DB2C_NO = 0,
- HDMI_INFOFRAME_AVI_DB2C_ITU601 = 1,
- HDMI_INFOFRAME_AVI_DB2C_ITU709 = 2,
- HDMI_INFOFRAME_AVI_DB2C_EC_EXTENDED = 3,
- HDMI_INFOFRAME_AVI_DB2M_NO = 0,
- HDMI_INFOFRAME_AVI_DB2M_43 = 1,
- HDMI_INFOFRAME_AVI_DB2M_169 = 2,
- HDMI_INFOFRAME_AVI_DB2R_SAME = 8,
- HDMI_INFOFRAME_AVI_DB2R_43 = 9,
- HDMI_INFOFRAME_AVI_DB2R_169 = 10,
- HDMI_INFOFRAME_AVI_DB2R_149 = 11,
- HDMI_INFOFRAME_AVI_DB3ITC_NO = 0,
- HDMI_INFOFRAME_AVI_DB3ITC_YES = 1,
- HDMI_INFOFRAME_AVI_DB3EC_XVYUV601 = 0,
- HDMI_INFOFRAME_AVI_DB3EC_XVYUV709 = 1,
- HDMI_INFOFRAME_AVI_DB3Q_DEFAULT = 0,
- HDMI_INFOFRAME_AVI_DB3Q_LR = 1,
- HDMI_INFOFRAME_AVI_DB3Q_FR = 2,
- HDMI_INFOFRAME_AVI_DB3SC_NO = 0,
- HDMI_INFOFRAME_AVI_DB3SC_HORI = 1,
- HDMI_INFOFRAME_AVI_DB3SC_VERT = 2,
- HDMI_INFOFRAME_AVI_DB3SC_HORIVERT = 3,
- HDMI_INFOFRAME_AVI_DB5PR_NO = 0,
- HDMI_INFOFRAME_AVI_DB5PR_2 = 1,
- HDMI_INFOFRAME_AVI_DB5PR_3 = 2,
- HDMI_INFOFRAME_AVI_DB5PR_4 = 3,
- HDMI_INFOFRAME_AVI_DB5PR_5 = 4,
- HDMI_INFOFRAME_AVI_DB5PR_6 = 5,
- HDMI_INFOFRAME_AVI_DB5PR_7 = 6,
- HDMI_INFOFRAME_AVI_DB5PR_8 = 7,
- HDMI_INFOFRAME_AVI_DB5PR_9 = 8,
- HDMI_INFOFRAME_AVI_DB5PR_10 = 9,
- HDMI_INFOFRAME_AUDIO_DB1CT_FROM_STREAM = 0,
- HDMI_INFOFRAME_AUDIO_DB1CT_IEC60958 = 1,
- HDMI_INFOFRAME_AUDIO_DB1CT_AC3 = 2,
- HDMI_INFOFRAME_AUDIO_DB1CT_MPEG1 = 3,
- HDMI_INFOFRAME_AUDIO_DB1CT_MP3 = 4,
- HDMI_INFOFRAME_AUDIO_DB1CT_MPEG2_MULTICH = 5,
- HDMI_INFOFRAME_AUDIO_DB1CT_AAC = 6,
- HDMI_INFOFRAME_AUDIO_DB1CT_DTS = 7,
- HDMI_INFOFRAME_AUDIO_DB1CT_ATRAC = 8,
- HDMI_INFOFRAME_AUDIO_DB1CT_ONEBIT = 9,
- HDMI_INFOFRAME_AUDIO_DB1CT_DOLBY_DIGITAL_PLUS = 10,
- HDMI_INFOFRAME_AUDIO_DB1CT_DTS_HD = 11,
- HDMI_INFOFRAME_AUDIO_DB1CT_MAT = 12,
- HDMI_INFOFRAME_AUDIO_DB1CT_DST = 13,
- HDMI_INFOFRAME_AUDIO_DB1CT_WMA_PRO = 14,
- HDMI_INFOFRAME_AUDIO_DB2SF_FROM_STREAM = 0,
- HDMI_INFOFRAME_AUDIO_DB2SF_32000 = 1,
- HDMI_INFOFRAME_AUDIO_DB2SF_44100 = 2,
- HDMI_INFOFRAME_AUDIO_DB2SF_48000 = 3,
- HDMI_INFOFRAME_AUDIO_DB2SF_88200 = 4,
- HDMI_INFOFRAME_AUDIO_DB2SF_96000 = 5,
- HDMI_INFOFRAME_AUDIO_DB2SF_176400 = 6,
- HDMI_INFOFRAME_AUDIO_DB2SF_192000 = 7,
- HDMI_INFOFRAME_AUDIO_DB2SS_FROM_STREAM = 0,
- HDMI_INFOFRAME_AUDIO_DB2SS_16BIT = 1,
- HDMI_INFOFRAME_AUDIO_DB2SS_20BIT = 2,
- HDMI_INFOFRAME_AUDIO_DB2SS_24BIT = 3,
- HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PERMITTED = 0,
- HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PROHIBITED = 1
-};
-
-enum hdmi_packing_mode {
- HDMI_PACK_10b_RGB_YUV444 = 0,
- HDMI_PACK_24b_RGB_YUV444_YUV422 = 1,
- HDMI_PACK_20b_YUV422 = 2,
- HDMI_PACK_ALREADYPACKED = 7
-};
-
-enum hdmi_core_audio_sample_freq {
- HDMI_AUDIO_FS_32000 = 0x3,
- HDMI_AUDIO_FS_44100 = 0x0,
- HDMI_AUDIO_FS_48000 = 0x2,
- HDMI_AUDIO_FS_88200 = 0x8,
- HDMI_AUDIO_FS_96000 = 0xA,
- HDMI_AUDIO_FS_176400 = 0xC,
- HDMI_AUDIO_FS_192000 = 0xE,
- HDMI_AUDIO_FS_NOT_INDICATED = 0x1
-};
-
-enum hdmi_core_audio_layout {
- HDMI_AUDIO_LAYOUT_2CH = 0,
- HDMI_AUDIO_LAYOUT_8CH = 1
-};
-
-enum hdmi_core_cts_mode {
- HDMI_AUDIO_CTS_MODE_HW = 0,
- HDMI_AUDIO_CTS_MODE_SW = 1
-};
-
-enum hdmi_stereo_channels {
- HDMI_AUDIO_STEREO_NOCHANNELS = 0,
- HDMI_AUDIO_STEREO_ONECHANNEL = 1,
- HDMI_AUDIO_STEREO_TWOCHANNELS = 2,
- HDMI_AUDIO_STEREO_THREECHANNELS = 3,
- HDMI_AUDIO_STEREO_FOURCHANNELS = 4
-};
-
-enum hdmi_audio_type {
- HDMI_AUDIO_TYPE_LPCM = 0,
- HDMI_AUDIO_TYPE_IEC = 1
-};
-
-enum hdmi_audio_justify {
- HDMI_AUDIO_JUSTIFY_LEFT = 0,
- HDMI_AUDIO_JUSTIFY_RIGHT = 1
-};
-
-enum hdmi_audio_sample_order {
- HDMI_AUDIO_SAMPLE_RIGHT_FIRST = 0,
- HDMI_AUDIO_SAMPLE_LEFT_FIRST = 1
-};
-
-enum hdmi_audio_samples_perword {
- HDMI_AUDIO_ONEWORD_ONESAMPLE = 0,
- HDMI_AUDIO_ONEWORD_TWOSAMPLES = 1
-};
-
-enum hdmi_audio_sample_size {
- HDMI_AUDIO_SAMPLE_16BITS = 0,
- HDMI_AUDIO_SAMPLE_24BITS = 1
-};
-
-enum hdmi_audio_transf_mode {
- HDMI_AUDIO_TRANSF_DMA = 0,
- HDMI_AUDIO_TRANSF_IRQ = 1
-};
-
-enum hdmi_audio_blk_strt_end_sig {
- HDMI_AUDIO_BLOCK_SIG_STARTEND_ON = 0,
- HDMI_AUDIO_BLOCK_SIG_STARTEND_OFF = 1
-};
-
-enum hdmi_audio_i2s_config {
- HDMI_AUDIO_I2S_WS_POLARITY_LOW_IS_LEFT = 0,
- HDMI_AUDIO_I2S_WS_POLARIT_YLOW_IS_RIGHT = 1,
- HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST = 0,
- HDMI_AUDIO_I2S_LSB_SHIFTED_FIRST = 1,
- HDMI_AUDIO_I2S_MAX_WORD_20BITS = 0,
- HDMI_AUDIO_I2S_MAX_WORD_24BITS = 1,
- HDMI_AUDIO_I2S_CHST_WORD_NOT_SPECIFIED = 0,
- HDMI_AUDIO_I2S_CHST_WORD_16_BITS = 1,
- HDMI_AUDIO_I2S_CHST_WORD_17_BITS = 6,
- HDMI_AUDIO_I2S_CHST_WORD_18_BITS = 2,
- HDMI_AUDIO_I2S_CHST_WORD_19_BITS = 4,
- HDMI_AUDIO_I2S_CHST_WORD_20_BITS_20MAX = 5,
- HDMI_AUDIO_I2S_CHST_WORD_20_BITS_24MAX = 1,
- HDMI_AUDIO_I2S_CHST_WORD_21_BITS = 6,
- HDMI_AUDIO_I2S_CHST_WORD_22_BITS = 2,
- HDMI_AUDIO_I2S_CHST_WORD_23_BITS = 4,
- HDMI_AUDIO_I2S_CHST_WORD_24_BITS = 5,
- HDMI_AUDIO_I2S_SCK_EDGE_FALLING = 0,
- HDMI_AUDIO_I2S_SCK_EDGE_RISING = 1,
- HDMI_AUDIO_I2S_VBIT_FOR_PCM = 0,
- HDMI_AUDIO_I2S_VBIT_FOR_COMPRESSED = 1,
- HDMI_AUDIO_I2S_INPUT_LENGTH_NA = 0,
- HDMI_AUDIO_I2S_INPUT_LENGTH_16 = 2,
- HDMI_AUDIO_I2S_INPUT_LENGTH_17 = 12,
- HDMI_AUDIO_I2S_INPUT_LENGTH_18 = 4,
- HDMI_AUDIO_I2S_INPUT_LENGTH_19 = 8,
- HDMI_AUDIO_I2S_INPUT_LENGTH_20 = 10,
- HDMI_AUDIO_I2S_INPUT_LENGTH_21 = 13,
- HDMI_AUDIO_I2S_INPUT_LENGTH_22 = 5,
- HDMI_AUDIO_I2S_INPUT_LENGTH_23 = 9,
- HDMI_AUDIO_I2S_INPUT_LENGTH_24 = 11,
- HDMI_AUDIO_I2S_FIRST_BIT_SHIFT = 0,
- HDMI_AUDIO_I2S_FIRST_BIT_NO_SHIFT = 1,
- HDMI_AUDIO_I2S_SD0_EN = 1,
- HDMI_AUDIO_I2S_SD1_EN = 1 << 1,
- HDMI_AUDIO_I2S_SD2_EN = 1 << 2,
- HDMI_AUDIO_I2S_SD3_EN = 1 << 3,
-};
-
-enum hdmi_audio_mclk_mode {
- HDMI_AUDIO_MCLK_128FS = 0,
- HDMI_AUDIO_MCLK_256FS = 1,
- HDMI_AUDIO_MCLK_384FS = 2,
- HDMI_AUDIO_MCLK_512FS = 3,
- HDMI_AUDIO_MCLK_768FS = 4,
- HDMI_AUDIO_MCLK_1024FS = 5,
- HDMI_AUDIO_MCLK_1152FS = 6,
- HDMI_AUDIO_MCLK_192FS = 7
-};
-
-struct hdmi_core_video_config {
- enum hdmi_core_inputbus_width ip_bus_width;
- enum hdmi_core_dither_trunc op_dither_truc;
- enum hdmi_core_deepcolor_ed deep_color_pkt;
- enum hdmi_core_packet_mode pkt_mode;
- enum hdmi_core_hdmi_dvi hdmi_dvi;
- enum hdmi_core_tclkselclkmult tclk_sel_clkmult;
-};
-
-/*
- * Refer to section 8.2 in HDMI 1.3 specification for
- * details about infoframe databytes
- */
-struct hdmi_core_infoframe_avi {
- u8 db1_format;
- /* Y0, Y1 rgb,yCbCr */
- u8 db1_active_info;
- /* A0 Active information Present */
- u8 db1_bar_info_dv;
- /* B0, B1 Bar info data valid */
- u8 db1_scan_info;
- /* S0, S1 scan information */
- u8 db2_colorimetry;
- /* C0, C1 colorimetry */
- u8 db2_aspect_ratio;
- /* M0, M1 Aspect ratio (4:3, 16:9) */
- u8 db2_active_fmt_ar;
- /* R0...R3 Active format aspect ratio */
- u8 db3_itc;
- /* ITC IT content. */
- u8 db3_ec;
- /* EC0, EC1, EC2 Extended colorimetry */
- u8 db3_q_range;
- /* Q1, Q0 Quantization range */
- u8 db3_nup_scaling;
- /* SC1, SC0 Non-uniform picture scaling */
- u8 db4_videocode;
- /* VIC0..6 Video format identification */
- u8 db5_pixel_repeat;
- /* PR0..PR3 Pixel repetition factor */
- u16 db6_7_line_eoftop;
- /* Line number end of top bar */
- u16 db8_9_line_sofbottom;
- /* Line number start of bottom bar */
- u16 db10_11_pixel_eofleft;
- /* Pixel number end of left bar */
- u16 db12_13_pixel_sofright;
- /* Pixel number start of right bar */
-};
-/*
- * Refer to section 8.2 in HDMI 1.3 specification for
- * details about infoframe databytes
- */
-struct hdmi_core_infoframe_audio {
- u8 db1_coding_type;
- u8 db1_channel_count;
- u8 db2_sample_freq;
- u8 db2_sample_size;
- u8 db4_channel_alloc;
- bool db5_downmix_inh;
- u8 db5_lsv; /* Level shift values for downmix */
-};
-
-struct hdmi_core_packet_enable_repeat {
- u32 audio_pkt;
- u32 audio_pkt_repeat;
- u32 avi_infoframe;
- u32 avi_infoframe_repeat;
- u32 gen_cntrl_pkt;
- u32 gen_cntrl_pkt_repeat;
- u32 generic_pkt;
- u32 generic_pkt_repeat;
-};
-
-struct hdmi_video_format {
- enum hdmi_packing_mode packing_mode;
- u32 y_res; /* Line per panel */
- u32 x_res; /* pixel per line */
-};
-
-struct hdmi_video_interface {
- int vsp; /* Vsync polarity */
- int hsp; /* Hsync polarity */
- int interlacing;
- int tm; /* Timing mode */
-};
-
-struct hdmi_cm {
- int code;
- int mode;
-};
-
-struct hdmi_config {
- struct hdmi_timings timings;
- u16 interlace;
- struct hdmi_cm cm;
-};
-
-struct hdmi_audio_format {
- enum hdmi_stereo_channels stereo_channels;
- u8 active_chnnls_msk;
- enum hdmi_audio_type type;
- enum hdmi_audio_justify justification;
- enum hdmi_audio_sample_order sample_order;
- enum hdmi_audio_samples_perword samples_per_word;
- enum hdmi_audio_sample_size sample_size;
- enum hdmi_audio_blk_strt_end_sig en_sig_blk_strt_end;
-};
-
-struct hdmi_audio_dma {
- u8 transfer_size;
- u8 block_size;
- enum hdmi_audio_transf_mode mode;
- u16 fifo_threshold;
-};
-
-struct hdmi_core_audio_i2s_config {
- u8 word_max_length;
- u8 word_length;
- u8 in_length_bits;
- u8 justification;
- u8 en_high_bitrate_aud;
- u8 sck_edge_mode;
- u8 cbit_order;
- u8 vbit;
- u8 ws_polarity;
- u8 direction;
- u8 shift;
- u8 active_sds;
-};
-
-struct hdmi_core_audio_config {
- struct hdmi_core_audio_i2s_config i2s_cfg;
- enum hdmi_core_audio_sample_freq freq_sample;
- bool fs_override;
- u32 n;
- u32 cts;
- u32 aud_par_busclk;
- enum hdmi_core_audio_layout layout;
- enum hdmi_core_cts_mode cts_mode;
- bool use_mclk;
- enum hdmi_audio_mclk_mode mclk_mode;
- bool en_acr_pkt;
- bool en_dsd_audio;
- bool en_parallel_aud_input;
- bool en_spdif;
-};
-#endif
diff --git a/drivers/video/omap2/dss/hdmi_omap4_panel.c b/drivers/video/omap2/dss/hdmi_omap4_panel.c
deleted file mode 100644
index 7d4f2bd..0000000
--- a/drivers/video/omap2/dss/hdmi_omap4_panel.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * hdmi_omap4_panel.c
- *
- * HDMI library support functions for TI OMAP4 processors.
- *
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
- * Authors: Mythri P k <mythripk@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-#include <video/omapdss.h>
-
-#include "dss.h"
-
-static struct {
- struct mutex hdmi_lock;
-} hdmi;
-
-
-static int hdmi_panel_probe(struct omap_dss_device *dssdev)
-{
- DSSDBG("ENTER hdmi_panel_probe\n");
-
- dssdev->panel.config = OMAP_DSS_LCD_TFT |
- OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS;
-
- /*
- * Initialize the timings to 640 * 480
- * This is only for framebuffer update not for TV timing setting
- * Setting TV timing will be done only on enable
- */
- dssdev->panel.timings.x_res = 640;
- dssdev->panel.timings.y_res = 480;
-
- DSSDBG("hdmi_panel_probe x_res= %d y_res = %d\n",
- dssdev->panel.timings.x_res,
- dssdev->panel.timings.y_res);
- return 0;
-}
-
-static void hdmi_panel_remove(struct omap_dss_device *dssdev)
-{
-
-}
-
-static int hdmi_panel_enable(struct omap_dss_device *dssdev)
-{
- int r = 0;
- DSSDBG("ENTER hdmi_panel_enable\n");
-
- mutex_lock(&hdmi.hdmi_lock);
-
- if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
- r = -EINVAL;
- goto err;
- }
-
- r = omapdss_hdmi_display_enable(dssdev);
- if (r) {
- DSSERR("failed to power on\n");
- goto err;
- }
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-err:
- mutex_unlock(&hdmi.hdmi_lock);
-
- return r;
-}
-
-static void hdmi_panel_disable(struct omap_dss_device *dssdev)
-{
- mutex_lock(&hdmi.hdmi_lock);
-
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
- omapdss_hdmi_display_disable(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
- mutex_unlock(&hdmi.hdmi_lock);
-}
-
-static int hdmi_panel_suspend(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- mutex_lock(&hdmi.hdmi_lock);
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
- r = -EINVAL;
- goto err;
- }
-
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-
- omapdss_hdmi_display_disable(dssdev);
-
-err:
- mutex_unlock(&hdmi.hdmi_lock);
-
- return r;
-}
-
-static int hdmi_panel_resume(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- mutex_lock(&hdmi.hdmi_lock);
-
- if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
- r = -EINVAL;
- goto err;
- }
-
- r = omapdss_hdmi_display_enable(dssdev);
- if (r) {
- DSSERR("failed to power on\n");
- goto err;
- }
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-err:
- mutex_unlock(&hdmi.hdmi_lock);
-
- return r;
-}
-
-static void hdmi_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- mutex_lock(&hdmi.hdmi_lock);
-
- *timings = dssdev->panel.timings;
-
- mutex_unlock(&hdmi.hdmi_lock);
-}
-
-static void hdmi_set_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- DSSDBG("hdmi_set_timings\n");
-
- mutex_lock(&hdmi.hdmi_lock);
-
- dssdev->panel.timings = *timings;
-
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
- /* turn the hdmi off and on to get new timings to use */
- omapdss_hdmi_display_disable(dssdev);
- omapdss_hdmi_display_set_timing(dssdev);
- }
-
- mutex_unlock(&hdmi.hdmi_lock);
-}
-
-static int hdmi_check_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- int r = 0;
-
- DSSDBG("hdmi_check_timings\n");
-
- mutex_lock(&hdmi.hdmi_lock);
-
- r = omapdss_hdmi_display_check_timing(dssdev, timings);
- if (r) {
- DSSERR("Timing cannot be applied\n");
- goto err;
- }
-err:
- mutex_unlock(&hdmi.hdmi_lock);
- return r;
-}
-
-static struct omap_dss_driver hdmi_driver = {
- .probe = hdmi_panel_probe,
- .remove = hdmi_panel_remove,
- .enable = hdmi_panel_enable,
- .disable = hdmi_panel_disable,
- .suspend = hdmi_panel_suspend,
- .resume = hdmi_panel_resume,
- .get_timings = hdmi_get_timings,
- .set_timings = hdmi_set_timings,
- .check_timings = hdmi_check_timings,
- .driver = {
- .name = "hdmi_panel",
- .owner = THIS_MODULE,
- },
-};
-
-int hdmi_panel_init(void)
-{
- mutex_init(&hdmi.hdmi_lock);
-
- omap_dss_register_driver(&hdmi_driver);
-
- return 0;
-}
-
-void hdmi_panel_exit(void)
-{
- omap_dss_unregister_driver(&hdmi_driver);
-
-}
diff --git a/drivers/video/omap2/dss/hdmi_panel.c b/drivers/video/omap2/dss/hdmi_panel.c
new file mode 100644
index 0000000..533d5dc
--- /dev/null
+++ b/drivers/video/omap2/dss/hdmi_panel.c
@@ -0,0 +1,256 @@
+/*
+ * hdmi_panel.c
+ *
+ * HDMI library support functions for TI OMAP4 processors.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Authors: Mythri P k <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <video/omapdss.h>
+#include <linux/slab.h>
+
+#include "dss.h"
+
+static struct {
+ struct mutex hdmi_lock;
+} hdmi;
+
+
+static int hdmi_panel_probe(struct omap_dss_device *dssdev)
+{
+ DSSDBG("ENTER hdmi_panel_probe\n");
+
+ dssdev->panel.config = OMAP_DSS_LCD_TFT |
+ OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS;
+
+ dssdev->panel.timings = (struct omap_video_timings){640, 480, 25175, 96, 16, 48, 2 , 11, 31};
+
+ DSSDBG("hdmi_panel_probe x_res= %d y_res = %d\n",
+ dssdev->panel.timings.x_res,
+ dssdev->panel.timings.y_res);
+ return 0;
+}
+
+static void hdmi_panel_remove(struct omap_dss_device *dssdev)
+{
+
+}
+
+static int hdmi_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+ DSSDBG("ENTER hdmi_panel_enable\n");
+
+ mutex_lock(&hdmi.hdmi_lock);
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+ r = -EINVAL;
+ goto err;
+ }
+
+ r = omapdss_hdmi_display_enable(dssdev);
+ if (r) {
+ DSSERR("failed to power on\n");
+ goto err;
+ }
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+err:
+ mutex_unlock(&hdmi.hdmi_lock);
+
+ return r;
+}
+
+static void hdmi_panel_disable(struct omap_dss_device *dssdev)
+{
+ mutex_lock(&hdmi.hdmi_lock);
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+ omapdss_hdmi_display_disable(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+ mutex_unlock(&hdmi.hdmi_lock);
+}
+
+static int hdmi_panel_suspend(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ mutex_lock(&hdmi.hdmi_lock);
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+ r = -EINVAL;
+ goto err;
+ }
+
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
+ omapdss_hdmi_display_disable(dssdev);
+
+err:
+ mutex_unlock(&hdmi.hdmi_lock);
+
+ return r;
+}
+
+static int hdmi_panel_resume(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ mutex_lock(&hdmi.hdmi_lock);
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
+ r = -EINVAL;
+ goto err;
+ }
+
+ r = omapdss_hdmi_display_enable(dssdev);
+ if (r) {
+ DSSERR("failed to power on\n");
+ goto err;
+ }
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+err:
+ mutex_unlock(&hdmi.hdmi_lock);
+
+ return r;
+}
+
+static void hdmi_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ mutex_lock(&hdmi.hdmi_lock);
+
+ *timings = dssdev->panel.timings;
+
+ mutex_unlock(&hdmi.hdmi_lock);
+}
+
+static void hdmi_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ DSSDBG("hdmi_set_timings\n");
+
+ mutex_lock(&hdmi.hdmi_lock);
+
+ dssdev->panel.timings = *timings;
+ omapdss_hdmi_display_set_timing(dssdev);
+
+ mutex_unlock(&hdmi.hdmi_lock);
+}
+
+static int hdmi_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ int r = 0;
+
+ DSSDBG("hdmi_check_timings\n");
+
+ mutex_lock(&hdmi.hdmi_lock);
+
+ r = omapdss_hdmi_display_check_timing(dssdev, timings);
+
+ mutex_unlock(&hdmi.hdmi_lock);
+ return r;
+}
+
+static int hdmi_read_edid(struct omap_dss_device *dssdev, u8 *buf, int len)
+{
+ int r;
+
+ mutex_lock(&hdmi.hdmi_lock);
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+ r = omapdss_hdmi_display_enable(dssdev);
+ if (r)
+ goto err;
+ }
+
+ r = omapdss_hdmi_read_edid(buf, len);
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
+ dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
+ omapdss_hdmi_display_disable(dssdev);
+err:
+ mutex_unlock(&hdmi.hdmi_lock);
+
+ return r;
+}
+
+static bool hdmi_detect(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ mutex_lock(&hdmi.hdmi_lock);
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+ r = omapdss_hdmi_display_enable(dssdev);
+ if (r)
+ goto err;
+ }
+
+ r = omapdss_hdmi_detect();
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
+ dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
+ omapdss_hdmi_display_disable(dssdev);
+err:
+ mutex_unlock(&hdmi.hdmi_lock);
+
+ return r;
+}
+
+static struct omap_dss_driver hdmi_driver = {
+ .probe = hdmi_panel_probe,
+ .remove = hdmi_panel_remove,
+ .enable = hdmi_panel_enable,
+ .disable = hdmi_panel_disable,
+ .suspend = hdmi_panel_suspend,
+ .resume = hdmi_panel_resume,
+ .get_timings = hdmi_get_timings,
+ .set_timings = hdmi_set_timings,
+ .check_timings = hdmi_check_timings,
+ .read_edid = hdmi_read_edid,
+ .detect = hdmi_detect,
+ .driver = {
+ .name = "hdmi_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+int hdmi_panel_init(void)
+{
+ mutex_init(&hdmi.hdmi_lock);
+
+ omap_dss_register_driver(&hdmi_driver);
+
+ return 0;
+}
+
+void hdmi_panel_exit(void)
+{
+ omap_dss_unregister_driver(&hdmi_driver);
+
+}
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 13d72d5..6e63845 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -106,7 +106,7 @@
static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.default_color);
+ return snprintf(buf, PAGE_SIZE, "%#x\n", mgr->info.default_color);
}
static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
@@ -116,8 +116,9 @@
u32 color;
int r;
- if (sscanf(buf, "%d", &color) != 1)
- return -EINVAL;
+ r = kstrtouint(buf, 0, &color);
+ if (r)
+ return r;
mgr->get_manager_info(mgr, &info);
@@ -184,7 +185,7 @@
static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_key);
+ return snprintf(buf, PAGE_SIZE, "%#x\n", mgr->info.trans_key);
}
static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
@@ -194,8 +195,9 @@
u32 key_value;
int r;
- if (sscanf(buf, "%d", &key_value) != 1)
- return -EINVAL;
+ r = kstrtouint(buf, 0, &key_value);
+ if (r)
+ return r;
mgr->get_manager_info(mgr, &info);
@@ -222,15 +224,16 @@
const char *buf, size_t size)
{
struct omap_overlay_manager_info info;
- int enable;
+ bool enable;
int r;
- if (sscanf(buf, "%d", &enable) != 1)
- return -EINVAL;
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
mgr->get_manager_info(mgr, &info);
- info.trans_enabled = enable ? true : false;
+ info.trans_enabled = enable;
r = mgr->set_manager_info(mgr, &info);
if (r)
@@ -246,7 +249,10 @@
static ssize_t manager_alpha_blending_enabled_show(
struct omap_overlay_manager *mgr, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.alpha_enabled);
+ WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ mgr->info.partial_alpha_enabled);
}
static ssize_t manager_alpha_blending_enabled_store(
@@ -254,15 +260,18 @@
const char *buf, size_t size)
{
struct omap_overlay_manager_info info;
- int enable;
+ bool enable;
int r;
- if (sscanf(buf, "%d", &enable) != 1)
- return -EINVAL;
+ WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
mgr->get_manager_info(mgr, &info);
- info.alpha_enabled = enable ? true : false;
+ info.partial_alpha_enabled = enable;
r = mgr->set_manager_info(mgr, &info);
if (r)
@@ -285,19 +294,16 @@
const char *buf, size_t size)
{
struct omap_overlay_manager_info info;
- int v;
int r;
bool enable;
if (!dss_has_feature(FEAT_CPR))
return -ENODEV;
- r = kstrtoint(buf, 0, &v);
+ r = strtobool(buf, &enable);
if (r)
return r;
- enable = !!v;
-
mgr->get_manager_info(mgr, &info);
if (info.cpr_enable == enable)
@@ -586,6 +592,13 @@
return -EINVAL;
}
+ /*
+ * Don't allow currently enabled displays to have the overlay manager
+ * pulled out from underneath them
+ */
+ if (mgr->device->state != OMAP_DSS_DISPLAY_DISABLED)
+ return -EINVAL;
+
mgr->device->manager = NULL;
mgr->device = NULL;
mgr->device_changed = true;
@@ -801,7 +814,7 @@
{
struct overlay_cache_data *c;
struct manager_cache_data *mc;
- struct omap_overlay_info *oi;
+ struct omap_overlay_info *oi, new_oi;
struct omap_overlay_manager_info *mi;
u16 outw, outh;
u16 x, y, w, h;
@@ -815,7 +828,7 @@
oi = &c->info;
if (!c->enabled) {
- dispc_enable_plane(plane, 0);
+ dispc_ovl_enable(plane, 0);
return 0;
}
@@ -843,7 +856,7 @@
/* If the overlay is outside the update region, disable it */
if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h,
x, y, outw, outh)) {
- dispc_enable_plane(plane, 0);
+ dispc_ovl_enable(plane, 0);
return 0;
}
@@ -921,34 +934,27 @@
}
}
- r = dispc_setup_plane(plane,
- paddr,
- oi->screen_width,
- x, y,
- w, h,
- outw, outh,
- oi->color_mode,
- c->ilace,
- oi->rotation_type,
- oi->rotation,
- oi->mirror,
- oi->global_alpha,
- oi->pre_mult_alpha,
- c->channel,
- oi->p_uv_addr);
+ new_oi = *oi;
+ /* update new_oi members which could have been possibly updated */
+ new_oi.pos_x = x;
+ new_oi.pos_y = y;
+ new_oi.width = w;
+ new_oi.height = h;
+ new_oi.out_width = outw;
+ new_oi.out_height = outh;
+ new_oi.paddr = paddr;
+
+ r = dispc_ovl_setup(plane, &new_oi, c->ilace, c->channel,
+ c->replication, c->fifo_low, c->fifo_high);
if (r) {
/* this shouldn't happen */
- DSSERR("dispc_setup_plane failed for ovl %d\n", plane);
- dispc_enable_plane(plane, 0);
+ DSSERR("dispc_ovl_setup failed for ovl %d\n", plane);
+ dispc_ovl_enable(plane, 0);
return r;
}
- dispc_enable_replication(plane, c->replication);
-
- dispc_set_fifo_threshold(plane, c->fifo_low, c->fifo_high);
-
- dispc_enable_plane(plane, 1);
+ dispc_ovl_enable(plane, 1);
return 0;
}
@@ -962,13 +968,13 @@
/* picking info from the cache */
mi = &dss_cache.manager_cache[channel].info;
- dispc_set_default_color(channel, mi->default_color);
- dispc_set_trans_key(channel, mi->trans_key_type, mi->trans_key);
- dispc_enable_trans_key(channel, mi->trans_enabled);
- dispc_enable_alpha_blending(channel, mi->alpha_enabled);
+ dispc_mgr_set_default_color(channel, mi->default_color);
+ dispc_mgr_set_trans_key(channel, mi->trans_key_type, mi->trans_key);
+ dispc_mgr_enable_trans_key(channel, mi->trans_enabled);
+ dispc_mgr_enable_alpha_fixed_zorder(channel, mi->partial_alpha_enabled);
if (dss_has_feature(FEAT_CPR)) {
- dispc_enable_cpr(channel, mi->cpr_enable);
- dispc_set_cpr_coef(channel, &mi->cpr_coefs);
+ dispc_mgr_enable_cpr(channel, mi->cpr_enable);
+ dispc_mgr_set_cpr_coef(channel, &mi->cpr_coefs);
}
}
@@ -992,7 +998,7 @@
busy = false;
for (i = 0; i < num_mgrs; i++) {
- mgr_busy[i] = dispc_go_busy(i);
+ mgr_busy[i] = dispc_mgr_go_busy(i);
mgr_go[i] = false;
}
@@ -1053,7 +1059,7 @@
* always be turned off after frame, and new settings will be
* taken in to use at next update */
if (!mc->manual_update)
- dispc_go(i);
+ dispc_mgr_go(i);
}
if (busy)
@@ -1258,7 +1264,7 @@
u32 irq_mask;
for (i = 0; i < num_mgrs; i++)
- mgr_busy[i] = dispc_go_busy(i);
+ mgr_busy[i] = dispc_mgr_go_busy(i);
spin_lock(&dss_cache.lock);
@@ -1280,7 +1286,7 @@
/* re-read busy flags */
for (i = 0; i < num_mgrs; i++)
- mgr_busy[i] = dispc_go_busy(i);
+ mgr_busy[i] = dispc_mgr_go_busy(i);
/* keep running as long as there are busy managers, so that
* we can collect overlay-applied information */
@@ -1326,11 +1332,13 @@
ovl = omap_dss_get_overlay(i);
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
-
oc = &dss_cache.overlay_cache[ovl->id];
+ if (ovl->manager_changed) {
+ ovl->manager_changed = false;
+ ovl->info_dirty = true;
+ }
+
if (!overlay_enabled(ovl)) {
if (oc->enabled) {
oc->enabled = false;
@@ -1375,9 +1383,6 @@
list_for_each_entry(mgr, &manager_list, list) {
struct omap_dss_device *dssdev;
- if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC))
- continue;
-
mc = &dss_cache.manager_cache[mgr->id];
if (mgr->device_changed) {
@@ -1423,9 +1428,6 @@
ovl = omap_dss_get_overlay(i);
- if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
- continue;
-
oc = &dss_cache.overlay_cache[ovl->id];
if (!oc->enabled)
@@ -1433,11 +1435,11 @@
dssdev = ovl->manager->device;
- size = dispc_get_plane_fifo_size(ovl->id);
+ size = dispc_ovl_get_fifo_size(ovl->id);
if (use_fifomerge)
size *= 3;
- burst_size = dispc_get_burst_size(ovl->id);
+ burst_size = dispc_ovl_get_burst_size(ovl->id);
switch (dssdev->type) {
case OMAP_DISPLAY_TYPE_DPI:
@@ -1484,12 +1486,17 @@
static int dss_check_manager(struct omap_overlay_manager *mgr)
{
- /* OMAP supports only graphics source transparency color key and alpha
- * blending simultaneously. See TRM 15.4.2.4.2.2 Alpha Mode */
-
- if (mgr->info.alpha_enabled && mgr->info.trans_enabled &&
- mgr->info.trans_key_type != OMAP_DSS_COLOR_KEY_GFX_DST)
- return -EINVAL;
+ if (dss_has_feature(FEAT_ALPHA_FIXED_ZORDER)) {
+ /*
+ * OMAP3 supports only graphics source transparency color key
+ * and alpha blending simultaneously. See TRM 15.4.2.4.2.2
+ * Alpha Mode
+ */
+ if (mgr->info.partial_alpha_enabled && mgr->info.trans_enabled
+ && mgr->info.trans_key_type !=
+ OMAP_DSS_COLOR_KEY_GFX_DST)
+ return -EINVAL;
+ }
return 0;
}
@@ -1522,13 +1529,13 @@
static int dss_mgr_enable(struct omap_overlay_manager *mgr)
{
- dispc_enable_channel(mgr->id, 1);
+ dispc_mgr_enable(mgr->id, 1);
return 0;
}
static int dss_mgr_disable(struct omap_overlay_manager *mgr)
{
- dispc_enable_channel(mgr->id, 0);
+ dispc_mgr_enable(mgr->id, 0);
return 0;
}
@@ -1580,7 +1587,7 @@
mgr->enable = &dss_mgr_enable;
mgr->disable = &dss_mgr_disable;
- mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC;
+ mgr->caps = 0;
mgr->supported_displays =
dss_feat_get_supported_displays(mgr->id);
@@ -1597,42 +1604,6 @@
}
}
-#ifdef L4_EXAMPLE
- {
- int omap_dss_mgr_apply_l4(struct omap_overlay_manager *mgr)
- {
- DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name);
-
- return 0;
- }
-
- struct omap_overlay_manager *mgr;
- mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
-
- BUG_ON(mgr == NULL);
-
- mgr->name = "l4";
- mgr->supported_displays =
- OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI;
-
- mgr->set_device = &omap_dss_set_device;
- mgr->unset_device = &omap_dss_unset_device;
- mgr->apply = &omap_dss_mgr_apply_l4;
- mgr->set_manager_info = &omap_dss_mgr_set_info;
- mgr->get_manager_info = &omap_dss_mgr_get_info;
-
- dss_overlay_setup_l4_manager(mgr);
-
- omap_dss_add_overlay_manager(mgr);
-
- r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
- &pdev->dev.kobj, "managerl4");
-
- if (r)
- DSSERR("failed to create sysfs file\n");
- }
-#endif
-
return 0;
}
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index c84380c..ab8e40e 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -211,16 +211,17 @@
static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
size_t size)
{
- int r, enable;
+ int r;
+ bool enable;
struct omap_overlay_info info;
ovl->get_overlay_info(ovl, &info);
- r = kstrtoint(buf, 0, &enable);
+ r = strtobool(buf, &enable);
if (r)
return r;
- info.enabled = !!enable;
+ info.enabled = enable;
r = ovl->set_overlay_info(ovl, &info);
if (r)
@@ -248,7 +249,7 @@
u8 alpha;
struct omap_overlay_info info;
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
return -ENODEV;
r = kstrtou8(buf, 0, &alpha);
@@ -257,14 +258,7 @@
ovl->get_overlay_info(ovl, &info);
- /* Video1 plane does not support global alpha
- * to always make it 255 completely opaque
- */
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA_VID1) &&
- ovl->id == OMAP_DSS_VIDEO1)
- info.global_alpha = 255;
- else
- info.global_alpha = alpha;
+ info.global_alpha = alpha;
r = ovl->set_overlay_info(ovl, &info);
if (r)
@@ -293,20 +287,52 @@
u8 alpha;
struct omap_overlay_info info;
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
+ return -ENODEV;
+
r = kstrtou8(buf, 0, &alpha);
if (r)
return r;
ovl->get_overlay_info(ovl, &info);
- /* only GFX and Video2 plane support pre alpha multiplied
- * set zero for Video1 plane
- */
- if (!dss_has_feature(FEAT_GLOBAL_ALPHA_VID1) &&
- ovl->id == OMAP_DSS_VIDEO1)
- info.pre_mult_alpha = 0;
- else
- info.pre_mult_alpha = alpha;
+ info.pre_mult_alpha = alpha;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_zorder_show(struct omap_overlay *ovl, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.zorder);
+}
+
+static ssize_t overlay_zorder_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ u8 zorder;
+ struct omap_overlay_info info;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
+ return -ENODEV;
+
+ r = kstrtou8(buf, 0, &zorder);
+ if (r)
+ return r;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.zorder = zorder;
r = ovl->set_overlay_info(ovl, &info);
if (r)
@@ -347,6 +373,8 @@
static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
overlay_pre_mult_alpha_show,
overlay_pre_mult_alpha_store);
+static OVERLAY_ATTR(zorder, S_IRUGO|S_IWUSR,
+ overlay_zorder_show, overlay_zorder_store);
static struct attribute *overlay_sysfs_attrs[] = {
&overlay_attr_name.attr,
@@ -358,6 +386,7 @@
&overlay_attr_enabled.attr,
&overlay_attr_global_alpha.attr,
&overlay_attr_pre_mult_alpha.attr,
+ &overlay_attr_zorder.attr,
NULL
};
@@ -407,6 +436,7 @@
struct omap_overlay_info *info;
u16 outw, outh;
u16 dw, dh;
+ int i;
if (!dssdev)
return 0;
@@ -462,6 +492,31 @@
return -EINVAL;
}
+ if (ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) {
+ if (info->zorder < 0 || info->zorder > 3) {
+ DSSERR("zorder out of range: %d\n",
+ info->zorder);
+ return -EINVAL;
+ }
+ /*
+ * Check that zorder doesn't match with zorder of any other
+ * overlay which is enabled and is also connected to the same
+ * manager
+ */
+ for (i = 0; i < omap_dss_get_num_overlays(); i++) {
+ struct omap_overlay *tmp_ovl = omap_dss_get_overlay(i);
+
+ if (tmp_ovl->id != ovl->id &&
+ tmp_ovl->manager == ovl->manager &&
+ tmp_ovl->info.enabled == true &&
+ tmp_ovl->info.zorder == info->zorder) {
+ DSSERR("%s and %s have same zorder: %d\n",
+ ovl->name, tmp_ovl->name, info->zorder);
+ return -EINVAL;
+ }
+ }
+ }
+
return 0;
}
@@ -516,6 +571,7 @@
}
ovl->manager = mgr;
+ ovl->manager_changed = true;
/* XXX: When there is an overlay on a DSI manual update display, and
* the overlay is first disabled, then moved to tv, and enabled, we
@@ -529,15 +585,12 @@
* Userspace workaround for this is to update the LCD after disabling
* the overlay, but before moving the overlay to TV.
*/
- dispc_set_channel_out(ovl->id, mgr->id);
return 0;
}
static int omap_dss_unset_manager(struct omap_overlay *ovl)
{
- int r;
-
if (!ovl->manager) {
DSSERR("failed to detach overlay: manager not set\n");
return -EINVAL;
@@ -548,11 +601,8 @@
return -EINVAL;
}
- r = ovl->wait_for_go(ovl);
- if (r)
- return r;
-
ovl->manager = NULL;
+ ovl->manager_changed = true;
return 0;
}
@@ -618,22 +668,29 @@
case 0:
ovl->name = "gfx";
ovl->id = OMAP_DSS_GFX;
- ovl->caps = OMAP_DSS_OVL_CAP_DISPC;
ovl->info.global_alpha = 255;
+ ovl->info.zorder = 0;
break;
case 1:
ovl->name = "vid1";
ovl->id = OMAP_DSS_VIDEO1;
- ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
- OMAP_DSS_OVL_CAP_DISPC;
ovl->info.global_alpha = 255;
+ ovl->info.zorder =
+ dss_has_feature(FEAT_ALPHA_FREE_ZORDER) ? 3 : 0;
break;
case 2:
ovl->name = "vid2";
ovl->id = OMAP_DSS_VIDEO2;
- ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
- OMAP_DSS_OVL_CAP_DISPC;
ovl->info.global_alpha = 255;
+ ovl->info.zorder =
+ dss_has_feature(FEAT_ALPHA_FREE_ZORDER) ? 2 : 0;
+ break;
+ case 3:
+ ovl->name = "vid3";
+ ovl->id = OMAP_DSS_VIDEO3;
+ ovl->info.global_alpha = 255;
+ ovl->info.zorder =
+ dss_has_feature(FEAT_ALPHA_FREE_ZORDER) ? 1 : 0;
break;
}
@@ -643,6 +700,7 @@
ovl->get_overlay_info = &dss_ovl_get_overlay_info;
ovl->wait_for_go = &dss_ovl_wait_for_go;
+ ovl->caps = dss_feat_get_overlay_caps(ovl->id);
ovl->supported_modes =
dss_feat_get_supported_color_modes(ovl->id);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 39f4c59..1bd3703 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -309,9 +309,9 @@
DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
- dispc_set_lcd_size(dssdev->manager->id, width, height);
+ dispc_mgr_set_lcd_size(dssdev->manager->id, width, height);
- dispc_enable_channel(dssdev->manager->id, true);
+ dispc_mgr_enable(dssdev->manager->id, true);
rfbi.framedone_callback = callback;
rfbi.framedone_callback_data = data;
@@ -783,10 +783,8 @@
if (*w == 0 || *h == 0)
return -EINVAL;
- if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- dss_setup_partial_planes(dssdev, x, y, w, h, true);
- dispc_set_lcd_size(dssdev->manager->id, *w, *h);
- }
+ dss_setup_partial_planes(dssdev, x, y, w, h, true);
+ dispc_mgr_set_lcd_size(dssdev->manager->id, *w, *h);
return 0;
}
@@ -796,22 +794,7 @@
u16 x, u16 y, u16 w, u16 h,
void (*callback)(void *), void *data)
{
- if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- rfbi_transfer_area(dssdev, w, h, callback, data);
- } else {
- struct omap_overlay *ovl;
- void __iomem *addr;
- int scr_width;
-
- ovl = dssdev->manager->overlays[0];
- scr_width = ovl->info.screen_width;
- addr = ovl->info.vaddr;
-
- omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
-
- callback(data);
- }
-
+ rfbi_transfer_area(dssdev, w, h, callback, data);
return 0;
}
EXPORT_SYMBOL(omap_rfbi_update);
@@ -860,6 +843,11 @@
{
int r;
+ if (dssdev->manager == NULL) {
+ DSSERR("failed to enable display: no manager\n");
+ return -ENODEV;
+ }
+
r = rfbi_runtime_get();
if (r)
return r;
@@ -877,13 +865,13 @@
goto err1;
}
- dispc_set_lcd_display_type(dssdev->manager->id,
+ dispc_mgr_set_lcd_display_type(dssdev->manager->id,
OMAP_DSS_LCD_DISPLAY_TFT);
- dispc_set_parallel_interface_mode(dssdev->manager->id,
- OMAP_DSS_PARALLELMODE_RFBI);
+ dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_RFBI);
+ dispc_mgr_enable_stallmode(dssdev->manager->id, true);
- dispc_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
rfbi_configure(dssdev->phy.rfbi.channel,
dssdev->ctrl.pixel_size,
@@ -952,10 +940,7 @@
msleep(10);
- if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap3630())
- clk = dss_get_ick();
- else
- clk = clk_get(&pdev->dev, "ick");
+ clk = clk_get(&pdev->dev, "ick");
if (IS_ERR(clk)) {
DSSERR("can't get ick\n");
r = PTR_ERR(clk);
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 3a688c8..695dc04 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -35,13 +35,13 @@
static void sdi_basic_init(struct omap_dss_device *dssdev)
{
- dispc_set_parallel_interface_mode(dssdev->manager->id,
- OMAP_DSS_PARALLELMODE_BYPASS);
+ dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_BYPASS);
+ dispc_mgr_enable_stallmode(dssdev->manager->id, false);
- dispc_set_lcd_display_type(dssdev->manager->id,
+ dispc_mgr_set_lcd_display_type(dssdev->manager->id,
OMAP_DSS_LCD_DISPLAY_TFT);
- dispc_set_tft_data_lines(dssdev->manager->id, 24);
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id, 24);
dispc_lcd_enable_signal_polarity(1);
}
@@ -55,6 +55,11 @@
unsigned long pck;
int r;
+ if (dssdev->manager == NULL) {
+ DSSERR("failed to enable display: no manager\n");
+ return -ENODEV;
+ }
+
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
@@ -78,7 +83,7 @@
/* 15.5.9.1.2 */
dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF;
- dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
+ dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acbi, dssdev->panel.acb);
r = dss_calc_clock_div(1, t->pixel_clock * 1000,
@@ -101,13 +106,13 @@
}
- dispc_set_lcd_timings(dssdev->manager->id, t);
+ dispc_mgr_set_lcd_timings(dssdev->manager->id, t);
r = dss_set_clock_div(&dss_cinfo);
if (r)
goto err_set_dss_clock_div;
- r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r)
goto err_set_dispc_clock_div;
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
new file mode 100644
index 0000000..2c3443d
--- /dev/null
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -0,0 +1,138 @@
+/*
+ * ti_hdmi.h
+ *
+ * HDMI driver definition for TI OMAP4, DM81xx, DM38xx Processor.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TI_HDMI_H
+#define _TI_HDMI_H
+
+struct hdmi_ip_data;
+
+enum hdmi_pll_pwr {
+ HDMI_PLLPWRCMD_ALLOFF = 0,
+ HDMI_PLLPWRCMD_PLLONLY = 1,
+ HDMI_PLLPWRCMD_BOTHON_ALLCLKS = 2,
+ HDMI_PLLPWRCMD_BOTHON_NOPHYCLK = 3
+};
+
+enum hdmi_core_hdmi_dvi {
+ HDMI_DVI = 0,
+ HDMI_HDMI = 1
+};
+
+enum hdmi_clk_refsel {
+ HDMI_REFSEL_PCLK = 0,
+ HDMI_REFSEL_REF1 = 1,
+ HDMI_REFSEL_REF2 = 2,
+ HDMI_REFSEL_SYSCLK = 3
+};
+
+struct hdmi_video_timings {
+ u16 x_res;
+ u16 y_res;
+ /* Unit: KHz */
+ u32 pixel_clock;
+ u16 hsw;
+ u16 hfp;
+ u16 hbp;
+ u16 vsw;
+ u16 vfp;
+ u16 vbp;
+};
+
+/* HDMI timing structure */
+struct hdmi_timings {
+ struct hdmi_video_timings timings;
+ int vsync_pol;
+ int hsync_pol;
+};
+
+struct hdmi_cm {
+ int code;
+ int mode;
+};
+
+struct hdmi_config {
+ struct hdmi_timings timings;
+ u16 interlace;
+ struct hdmi_cm cm;
+};
+
+/* HDMI PLL structure */
+struct hdmi_pll_info {
+ u16 regn;
+ u16 regm;
+ u32 regmf;
+ u16 regm2;
+ u16 regsd;
+ u16 dcofreq;
+ enum hdmi_clk_refsel refsel;
+};
+
+struct ti_hdmi_ip_ops {
+
+ void (*video_configure)(struct hdmi_ip_data *ip_data);
+
+ int (*phy_enable)(struct hdmi_ip_data *ip_data);
+
+ void (*phy_disable)(struct hdmi_ip_data *ip_data);
+
+ int (*read_edid)(struct hdmi_ip_data *ip_data, u8 *edid, int len);
+
+ bool (*detect)(struct hdmi_ip_data *ip_data);
+
+ int (*pll_enable)(struct hdmi_ip_data *ip_data);
+
+ void (*pll_disable)(struct hdmi_ip_data *ip_data);
+
+ void (*video_enable)(struct hdmi_ip_data *ip_data, bool start);
+
+ void (*dump_wrapper)(struct hdmi_ip_data *ip_data, struct seq_file *s);
+
+ void (*dump_core)(struct hdmi_ip_data *ip_data, struct seq_file *s);
+
+ void (*dump_pll)(struct hdmi_ip_data *ip_data, struct seq_file *s);
+
+ void (*dump_phy)(struct hdmi_ip_data *ip_data, struct seq_file *s);
+
+};
+
+struct hdmi_ip_data {
+ void __iomem *base_wp; /* HDMI wrapper */
+ unsigned long core_sys_offset;
+ unsigned long core_av_offset;
+ unsigned long pll_offset;
+ unsigned long phy_offset;
+ const struct ti_hdmi_ip_ops *ops;
+ struct hdmi_config cfg;
+ struct hdmi_pll_info pll_data;
+};
+int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data);
+int ti_hdmi_4xxx_read_edid(struct hdmi_ip_data *ip_data, u8 *edid, int len);
+bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data, bool start);
+int ti_hdmi_4xxx_pll_enable(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data);
+void ti_hdmi_4xxx_wp_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
+void ti_hdmi_4xxx_pll_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
+void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
+void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s);
+
+#endif
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
new file mode 100644
index 0000000..e1a6ce5
--- /dev/null
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -0,0 +1,1239 @@
+/*
+ * ti_hdmi_4xxx_ip.c
+ *
+ * HDMI TI81xx, TI38xx, TI OMAP4 etc IP driver Library
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Authors: Yong Zhi
+ * Mythri pk <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+
+#include "ti_hdmi_4xxx_ip.h"
+#include "dss.h"
+
+static inline void hdmi_write_reg(void __iomem *base_addr,
+ const u16 idx, u32 val)
+{
+ __raw_writel(val, base_addr + idx);
+}
+
+static inline u32 hdmi_read_reg(void __iomem *base_addr,
+ const u16 idx)
+{
+ return __raw_readl(base_addr + idx);
+}
+
+static inline void __iomem *hdmi_wp_base(struct hdmi_ip_data *ip_data)
+{
+ return ip_data->base_wp;
+}
+
+static inline void __iomem *hdmi_phy_base(struct hdmi_ip_data *ip_data)
+{
+ return ip_data->base_wp + ip_data->phy_offset;
+}
+
+static inline void __iomem *hdmi_pll_base(struct hdmi_ip_data *ip_data)
+{
+ return ip_data->base_wp + ip_data->pll_offset;
+}
+
+static inline void __iomem *hdmi_av_base(struct hdmi_ip_data *ip_data)
+{
+ return ip_data->base_wp + ip_data->core_av_offset;
+}
+
+static inline void __iomem *hdmi_core_sys_base(struct hdmi_ip_data *ip_data)
+{
+ return ip_data->base_wp + ip_data->core_sys_offset;
+}
+
+static inline int hdmi_wait_for_bit_change(void __iomem *base_addr,
+ const u16 idx,
+ int b2, int b1, u32 val)
+{
+ u32 t = 0;
+ while (val != REG_GET(base_addr, idx, b2, b1)) {
+ udelay(1);
+ if (t++ > 10000)
+ return !val;
+ }
+ return val;
+}
+
+static int hdmi_pll_init(struct hdmi_ip_data *ip_data)
+{
+ u32 r;
+ void __iomem *pll_base = hdmi_pll_base(ip_data);
+ struct hdmi_pll_info *fmt = &ip_data->pll_data;
+
+ /* PLL start always use manual mode */
+ REG_FLD_MOD(pll_base, PLLCTRL_PLL_CONTROL, 0x0, 0, 0);
+
+ r = hdmi_read_reg(pll_base, PLLCTRL_CFG1);
+ r = FLD_MOD(r, fmt->regm, 20, 9); /* CFG1_PLL_REGM */
+ r = FLD_MOD(r, fmt->regn - 1, 8, 1); /* CFG1_PLL_REGN */
+
+ hdmi_write_reg(pll_base, PLLCTRL_CFG1, r);
+
+ r = hdmi_read_reg(pll_base, PLLCTRL_CFG2);
+
+ r = FLD_MOD(r, 0x0, 12, 12); /* PLL_HIGHFREQ divide by 2 */
+ r = FLD_MOD(r, 0x1, 13, 13); /* PLL_REFEN */
+ r = FLD_MOD(r, 0x0, 14, 14); /* PHY_CLKINEN de-assert during locking */
+ r = FLD_MOD(r, fmt->refsel, 22, 21); /* REFSEL */
+
+ if (fmt->dcofreq) {
+ /* divider programming for frequency beyond 1000Mhz */
+ REG_FLD_MOD(pll_base, PLLCTRL_CFG3, fmt->regsd, 17, 10);
+ r = FLD_MOD(r, 0x4, 3, 1); /* 1000MHz and 2000MHz */
+ } else {
+ r = FLD_MOD(r, 0x2, 3, 1); /* 500MHz and 1000MHz */
+ }
+
+ hdmi_write_reg(pll_base, PLLCTRL_CFG2, r);
+
+ r = hdmi_read_reg(pll_base, PLLCTRL_CFG4);
+ r = FLD_MOD(r, fmt->regm2, 24, 18);
+ r = FLD_MOD(r, fmt->regmf, 17, 0);
+
+ hdmi_write_reg(pll_base, PLLCTRL_CFG4, r);
+
+ /* go now */
+ REG_FLD_MOD(pll_base, PLLCTRL_PLL_GO, 0x1, 0, 0);
+
+ /* wait for bit change */
+ if (hdmi_wait_for_bit_change(pll_base, PLLCTRL_PLL_GO,
+ 0, 0, 1) != 1) {
+ pr_err("PLL GO bit not set\n");
+ return -ETIMEDOUT;
+ }
+
+ /* Wait till the lock bit is set in PLL status */
+ if (hdmi_wait_for_bit_change(pll_base,
+ PLLCTRL_PLL_STATUS, 1, 1, 1) != 1) {
+ pr_err("cannot lock PLL\n");
+ pr_err("CFG1 0x%x\n",
+ hdmi_read_reg(pll_base, PLLCTRL_CFG1));
+ pr_err("CFG2 0x%x\n",
+ hdmi_read_reg(pll_base, PLLCTRL_CFG2));
+ pr_err("CFG4 0x%x\n",
+ hdmi_read_reg(pll_base, PLLCTRL_CFG4));
+ return -ETIMEDOUT;
+ }
+
+ pr_debug("PLL locked!\n");
+
+ return 0;
+}
+
+/* PHY_PWR_CMD */
+static int hdmi_set_phy_pwr(struct hdmi_ip_data *ip_data, enum hdmi_phy_pwr val)
+{
+ /* Command for power control of HDMI PHY */
+ REG_FLD_MOD(hdmi_wp_base(ip_data), HDMI_WP_PWR_CTRL, val, 7, 6);
+
+ /* Status of the power control of HDMI PHY */
+ if (hdmi_wait_for_bit_change(hdmi_wp_base(ip_data),
+ HDMI_WP_PWR_CTRL, 5, 4, val) != val) {
+ pr_err("Failed to set PHY power mode to %d\n", val);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/* PLL_PWR_CMD */
+static int hdmi_set_pll_pwr(struct hdmi_ip_data *ip_data, enum hdmi_pll_pwr val)
+{
+ /* Command for power control of HDMI PLL */
+ REG_FLD_MOD(hdmi_wp_base(ip_data), HDMI_WP_PWR_CTRL, val, 3, 2);
+
+ /* wait till PHY_PWR_STATUS is set */
+ if (hdmi_wait_for_bit_change(hdmi_wp_base(ip_data), HDMI_WP_PWR_CTRL,
+ 1, 0, val) != val) {
+ pr_err("Failed to set PLL_PWR_STATUS\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int hdmi_pll_reset(struct hdmi_ip_data *ip_data)
+{
+ /* SYSRESET controlled by power FSM */
+ REG_FLD_MOD(hdmi_pll_base(ip_data), PLLCTRL_PLL_CONTROL, 0x0, 3, 3);
+
+ /* READ 0x0 reset is in progress */
+ if (hdmi_wait_for_bit_change(hdmi_pll_base(ip_data),
+ PLLCTRL_PLL_STATUS, 0, 0, 1) != 1) {
+ pr_err("Failed to sysreset PLL\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+int ti_hdmi_4xxx_pll_enable(struct hdmi_ip_data *ip_data)
+{
+ u16 r = 0;
+
+ r = hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF);
+ if (r)
+ return r;
+
+ r = hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_BOTHON_ALLCLKS);
+ if (r)
+ return r;
+
+ r = hdmi_pll_reset(ip_data);
+ if (r)
+ return r;
+
+ r = hdmi_pll_init(ip_data);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data)
+{
+ hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF);
+}
+
+int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data)
+{
+ u16 r = 0;
+ void __iomem *phy_base = hdmi_phy_base(ip_data);
+
+ r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON);
+ if (r)
+ return r;
+
+ r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON);
+ if (r)
+ return r;
+
+ /*
+ * Read address 0 in order to get the SCP reset done completed
+ * Dummy access performed to make sure reset is done
+ */
+ hdmi_read_reg(phy_base, HDMI_TXPHY_TX_CTRL);
+
+ /*
+ * Write to phy address 0 to configure the clock
+ * use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
+ */
+ REG_FLD_MOD(phy_base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
+
+ /* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
+ hdmi_write_reg(phy_base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
+
+ /* Setup max LDO voltage */
+ REG_FLD_MOD(phy_base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
+
+ /* Write to phy address 3 to change the polarity control */
+ REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
+
+ return 0;
+}
+
+void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data)
+{
+ hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
+}
+
+static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data)
+{
+ void __iomem *base = hdmi_core_sys_base(ip_data);
+
+ /* Turn on CLK for DDC */
+ REG_FLD_MOD(base, HDMI_CORE_AV_DPD, 0x7, 2, 0);
+
+ /* IN_PROG */
+ if (REG_GET(base, HDMI_CORE_DDC_STATUS, 4, 4) == 1) {
+ /* Abort transaction */
+ REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0xf, 3, 0);
+ /* IN_PROG */
+ if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+ 4, 4, 0) != 0) {
+ DSSERR("Timeout aborting DDC transaction\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* Clk SCL Devices */
+ REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0xA, 3, 0);
+
+ /* HDMI_CORE_DDC_STATUS_IN_PROG */
+ if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+ 4, 4, 0) != 0) {
+ DSSERR("Timeout starting SCL clock\n");
+ return -ETIMEDOUT;
+ }
+
+ /* Clear FIFO */
+ REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x9, 3, 0);
+
+ /* HDMI_CORE_DDC_STATUS_IN_PROG */
+ if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+ 4, 4, 0) != 0) {
+ DSSERR("Timeout clearing DDC fifo\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int hdmi_core_ddc_edid(struct hdmi_ip_data *ip_data,
+ u8 *pedid, int ext)
+{
+ void __iomem *base = hdmi_core_sys_base(ip_data);
+ u32 i;
+ char checksum;
+ u32 offset = 0;
+
+ /* HDMI_CORE_DDC_STATUS_IN_PROG */
+ if (hdmi_wait_for_bit_change(base, HDMI_CORE_DDC_STATUS,
+ 4, 4, 0) != 0) {
+ DSSERR("Timeout waiting DDC to be ready\n");
+ return -ETIMEDOUT;
+ }
+
+ if (ext % 2 != 0)
+ offset = 0x80;
+
+ /* Load Segment Address Register */
+ REG_FLD_MOD(base, HDMI_CORE_DDC_SEGM, ext / 2, 7, 0);
+
+ /* Load Slave Address Register */
+ REG_FLD_MOD(base, HDMI_CORE_DDC_ADDR, 0xA0 >> 1, 7, 1);
+
+ /* Load Offset Address Register */
+ REG_FLD_MOD(base, HDMI_CORE_DDC_OFFSET, offset, 7, 0);
+
+ /* Load Byte Count */
+ REG_FLD_MOD(base, HDMI_CORE_DDC_COUNT1, 0x80, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_DDC_COUNT2, 0x0, 1, 0);
+
+ /* Set DDC_CMD */
+ if (ext)
+ REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x4, 3, 0);
+ else
+ REG_FLD_MOD(base, HDMI_CORE_DDC_CMD, 0x2, 3, 0);
+
+ /* HDMI_CORE_DDC_STATUS_BUS_LOW */
+ if (REG_GET(base, HDMI_CORE_DDC_STATUS, 6, 6) == 1) {
+ pr_err("I2C Bus Low?\n");
+ return -EIO;
+ }
+ /* HDMI_CORE_DDC_STATUS_NO_ACK */
+ if (REG_GET(base, HDMI_CORE_DDC_STATUS, 5, 5) == 1) {
+ pr_err("I2C No Ack\n");
+ return -EIO;
+ }
+
+ for (i = 0; i < 0x80; ++i) {
+ int t;
+
+ /* IN_PROG */
+ if (REG_GET(base, HDMI_CORE_DDC_STATUS, 4, 4) == 0) {
+ DSSERR("operation stopped when reading edid\n");
+ return -EIO;
+ }
+
+ t = 0;
+ /* FIFO_EMPTY */
+ while (REG_GET(base, HDMI_CORE_DDC_STATUS, 2, 2) == 1) {
+ if (t++ > 10000) {
+ DSSERR("timeout reading edid\n");
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+ }
+
+ pedid[i] = REG_GET(base, HDMI_CORE_DDC_DATA, 7, 0);
+ }
+
+ checksum = 0;
+ for (i = 0; i < 0x80; ++i)
+ checksum += pedid[i];
+
+ if (checksum != 0) {
+ pr_err("E-EDID checksum failed!!\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+int ti_hdmi_4xxx_read_edid(struct hdmi_ip_data *ip_data,
+ u8 *edid, int len)
+{
+ int r, l;
+
+ if (len < 128)
+ return -EINVAL;
+
+ r = hdmi_core_ddc_init(ip_data);
+ if (r)
+ return r;
+
+ r = hdmi_core_ddc_edid(ip_data, edid, 0);
+ if (r)
+ return r;
+
+ l = 128;
+
+ if (len >= 128 * 2 && edid[0x7e] > 0) {
+ r = hdmi_core_ddc_edid(ip_data, edid + 0x80, 1);
+ if (r)
+ return r;
+ l += 128;
+ }
+
+ return l;
+}
+
+bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data)
+{
+ int r;
+
+ void __iomem *base = hdmi_core_sys_base(ip_data);
+
+ /* HPD */
+ r = REG_GET(base, HDMI_CORE_SYS_SYS_STAT, 1, 1);
+
+ return r == 1;
+}
+
+static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,
+ struct hdmi_core_infoframe_avi *avi_cfg,
+ struct hdmi_core_packet_enable_repeat *repeat_cfg)
+{
+ pr_debug("Enter hdmi_core_init\n");
+
+ /* video core */
+ video_cfg->ip_bus_width = HDMI_INPUT_8BIT;
+ video_cfg->op_dither_truc = HDMI_OUTPUTTRUNCATION_8BIT;
+ video_cfg->deep_color_pkt = HDMI_DEEPCOLORPACKECTDISABLE;
+ video_cfg->pkt_mode = HDMI_PACKETMODERESERVEDVALUE;
+ video_cfg->hdmi_dvi = HDMI_DVI;
+ video_cfg->tclk_sel_clkmult = HDMI_FPLL10IDCK;
+
+ /* info frame */
+ avi_cfg->db1_format = 0;
+ avi_cfg->db1_active_info = 0;
+ avi_cfg->db1_bar_info_dv = 0;
+ avi_cfg->db1_scan_info = 0;
+ avi_cfg->db2_colorimetry = 0;
+ avi_cfg->db2_aspect_ratio = 0;
+ avi_cfg->db2_active_fmt_ar = 0;
+ avi_cfg->db3_itc = 0;
+ avi_cfg->db3_ec = 0;
+ avi_cfg->db3_q_range = 0;
+ avi_cfg->db3_nup_scaling = 0;
+ avi_cfg->db4_videocode = 0;
+ avi_cfg->db5_pixel_repeat = 0;
+ avi_cfg->db6_7_line_eoftop = 0 ;
+ avi_cfg->db8_9_line_sofbottom = 0;
+ avi_cfg->db10_11_pixel_eofleft = 0;
+ avi_cfg->db12_13_pixel_sofright = 0;
+
+ /* packet enable and repeat */
+ repeat_cfg->audio_pkt = 0;
+ repeat_cfg->audio_pkt_repeat = 0;
+ repeat_cfg->avi_infoframe = 0;
+ repeat_cfg->avi_infoframe_repeat = 0;
+ repeat_cfg->gen_cntrl_pkt = 0;
+ repeat_cfg->gen_cntrl_pkt_repeat = 0;
+ repeat_cfg->generic_pkt = 0;
+ repeat_cfg->generic_pkt_repeat = 0;
+}
+
+static void hdmi_core_powerdown_disable(struct hdmi_ip_data *ip_data)
+{
+ pr_debug("Enter hdmi_core_powerdown_disable\n");
+ REG_FLD_MOD(hdmi_core_sys_base(ip_data), HDMI_CORE_CTRL1, 0x0, 0, 0);
+}
+
+static void hdmi_core_swreset_release(struct hdmi_ip_data *ip_data)
+{
+ pr_debug("Enter hdmi_core_swreset_release\n");
+ REG_FLD_MOD(hdmi_core_sys_base(ip_data), HDMI_CORE_SYS_SRST, 0x0, 0, 0);
+}
+
+static void hdmi_core_swreset_assert(struct hdmi_ip_data *ip_data)
+{
+ pr_debug("Enter hdmi_core_swreset_assert\n");
+ REG_FLD_MOD(hdmi_core_sys_base(ip_data), HDMI_CORE_SYS_SRST, 0x1, 0, 0);
+}
+
+/* HDMI_CORE_VIDEO_CONFIG */
+static void hdmi_core_video_config(struct hdmi_ip_data *ip_data,
+ struct hdmi_core_video_config *cfg)
+{
+ u32 r = 0;
+ void __iomem *core_sys_base = hdmi_core_sys_base(ip_data);
+
+ /* sys_ctrl1 default configuration not tunable */
+ r = hdmi_read_reg(core_sys_base, HDMI_CORE_CTRL1);
+ r = FLD_MOD(r, HDMI_CORE_CTRL1_VEN_FOLLOWVSYNC, 5, 5);
+ r = FLD_MOD(r, HDMI_CORE_CTRL1_HEN_FOLLOWHSYNC, 4, 4);
+ r = FLD_MOD(r, HDMI_CORE_CTRL1_BSEL_24BITBUS, 2, 2);
+ r = FLD_MOD(r, HDMI_CORE_CTRL1_EDGE_RISINGEDGE, 1, 1);
+ hdmi_write_reg(core_sys_base, HDMI_CORE_CTRL1, r);
+
+ REG_FLD_MOD(core_sys_base,
+ HDMI_CORE_SYS_VID_ACEN, cfg->ip_bus_width, 7, 6);
+
+ /* Vid_Mode */
+ r = hdmi_read_reg(core_sys_base, HDMI_CORE_SYS_VID_MODE);
+
+ /* dither truncation configuration */
+ if (cfg->op_dither_truc > HDMI_OUTPUTTRUNCATION_12BIT) {
+ r = FLD_MOD(r, cfg->op_dither_truc - 3, 7, 6);
+ r = FLD_MOD(r, 1, 5, 5);
+ } else {
+ r = FLD_MOD(r, cfg->op_dither_truc, 7, 6);
+ r = FLD_MOD(r, 0, 5, 5);
+ }
+ hdmi_write_reg(core_sys_base, HDMI_CORE_SYS_VID_MODE, r);
+
+ /* HDMI_Ctrl */
+ r = hdmi_read_reg(hdmi_av_base(ip_data), HDMI_CORE_AV_HDMI_CTRL);
+ r = FLD_MOD(r, cfg->deep_color_pkt, 6, 6);
+ r = FLD_MOD(r, cfg->pkt_mode, 5, 3);
+ r = FLD_MOD(r, cfg->hdmi_dvi, 0, 0);
+ hdmi_write_reg(hdmi_av_base(ip_data), HDMI_CORE_AV_HDMI_CTRL, r);
+
+ /* TMDS_CTRL */
+ REG_FLD_MOD(core_sys_base,
+ HDMI_CORE_SYS_TMDS_CTRL, cfg->tclk_sel_clkmult, 6, 5);
+}
+
+static void hdmi_core_aux_infoframe_avi_config(struct hdmi_ip_data *ip_data,
+ struct hdmi_core_infoframe_avi info_avi)
+{
+ u32 val;
+ char sum = 0, checksum = 0;
+ void __iomem *av_base = hdmi_av_base(ip_data);
+
+ sum += 0x82 + 0x002 + 0x00D;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_TYPE, 0x082);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_VERS, 0x002);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_LEN, 0x00D);
+
+ val = (info_avi.db1_format << 5) |
+ (info_avi.db1_active_info << 4) |
+ (info_avi.db1_bar_info_dv << 2) |
+ (info_avi.db1_scan_info);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(0), val);
+ sum += val;
+
+ val = (info_avi.db2_colorimetry << 6) |
+ (info_avi.db2_aspect_ratio << 4) |
+ (info_avi.db2_active_fmt_ar);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(1), val);
+ sum += val;
+
+ val = (info_avi.db3_itc << 7) |
+ (info_avi.db3_ec << 4) |
+ (info_avi.db3_q_range << 2) |
+ (info_avi.db3_nup_scaling);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(2), val);
+ sum += val;
+
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(3),
+ info_avi.db4_videocode);
+ sum += info_avi.db4_videocode;
+
+ val = info_avi.db5_pixel_repeat;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(4), val);
+ sum += val;
+
+ val = info_avi.db6_7_line_eoftop & 0x00FF;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(5), val);
+ sum += val;
+
+ val = ((info_avi.db6_7_line_eoftop >> 8) & 0x00FF);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(6), val);
+ sum += val;
+
+ val = info_avi.db8_9_line_sofbottom & 0x00FF;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(7), val);
+ sum += val;
+
+ val = ((info_avi.db8_9_line_sofbottom >> 8) & 0x00FF);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(8), val);
+ sum += val;
+
+ val = info_avi.db10_11_pixel_eofleft & 0x00FF;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(9), val);
+ sum += val;
+
+ val = ((info_avi.db10_11_pixel_eofleft >> 8) & 0x00FF);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(10), val);
+ sum += val;
+
+ val = info_avi.db12_13_pixel_sofright & 0x00FF;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(11), val);
+ sum += val;
+
+ val = ((info_avi.db12_13_pixel_sofright >> 8) & 0x00FF);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_DBYTE(12), val);
+ sum += val;
+
+ checksum = 0x100 - sum;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_CHSUM, checksum);
+}
+
+static void hdmi_core_av_packet_config(struct hdmi_ip_data *ip_data,
+ struct hdmi_core_packet_enable_repeat repeat_cfg)
+{
+ /* enable/repeat the infoframe */
+ hdmi_write_reg(hdmi_av_base(ip_data), HDMI_CORE_AV_PB_CTRL1,
+ (repeat_cfg.audio_pkt << 5) |
+ (repeat_cfg.audio_pkt_repeat << 4) |
+ (repeat_cfg.avi_infoframe << 1) |
+ (repeat_cfg.avi_infoframe_repeat));
+
+ /* enable/repeat the packet */
+ hdmi_write_reg(hdmi_av_base(ip_data), HDMI_CORE_AV_PB_CTRL2,
+ (repeat_cfg.gen_cntrl_pkt << 3) |
+ (repeat_cfg.gen_cntrl_pkt_repeat << 2) |
+ (repeat_cfg.generic_pkt << 1) |
+ (repeat_cfg.generic_pkt_repeat));
+}
+
+static void hdmi_wp_init(struct omap_video_timings *timings,
+ struct hdmi_video_format *video_fmt,
+ struct hdmi_video_interface *video_int)
+{
+ pr_debug("Enter hdmi_wp_init\n");
+
+ timings->hbp = 0;
+ timings->hfp = 0;
+ timings->hsw = 0;
+ timings->vbp = 0;
+ timings->vfp = 0;
+ timings->vsw = 0;
+
+ video_fmt->packing_mode = HDMI_PACK_10b_RGB_YUV444;
+ video_fmt->y_res = 0;
+ video_fmt->x_res = 0;
+
+ video_int->vsp = 0;
+ video_int->hsp = 0;
+
+ video_int->interlacing = 0;
+ video_int->tm = 0; /* HDMI_TIMING_SLAVE */
+
+}
+
+void ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data, bool start)
+{
+ REG_FLD_MOD(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, start, 31, 31);
+}
+
+static void hdmi_wp_video_init_format(struct hdmi_video_format *video_fmt,
+ struct omap_video_timings *timings, struct hdmi_config *param)
+{
+ pr_debug("Enter hdmi_wp_video_init_format\n");
+
+ video_fmt->y_res = param->timings.timings.y_res;
+ video_fmt->x_res = param->timings.timings.x_res;
+
+ timings->hbp = param->timings.timings.hbp;
+ timings->hfp = param->timings.timings.hfp;
+ timings->hsw = param->timings.timings.hsw;
+ timings->vbp = param->timings.timings.vbp;
+ timings->vfp = param->timings.timings.vfp;
+ timings->vsw = param->timings.timings.vsw;
+}
+
+static void hdmi_wp_video_config_format(struct hdmi_ip_data *ip_data,
+ struct hdmi_video_format *video_fmt)
+{
+ u32 l = 0;
+
+ REG_FLD_MOD(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG,
+ video_fmt->packing_mode, 10, 8);
+
+ l |= FLD_VAL(video_fmt->y_res, 31, 16);
+ l |= FLD_VAL(video_fmt->x_res, 15, 0);
+ hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_SIZE, l);
+}
+
+static void hdmi_wp_video_config_interface(struct hdmi_ip_data *ip_data,
+ struct hdmi_video_interface *video_int)
+{
+ u32 r;
+ pr_debug("Enter hdmi_wp_video_config_interface\n");
+
+ r = hdmi_read_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG);
+ r = FLD_MOD(r, video_int->vsp, 7, 7);
+ r = FLD_MOD(r, video_int->hsp, 6, 6);
+ r = FLD_MOD(r, video_int->interlacing, 3, 3);
+ r = FLD_MOD(r, video_int->tm, 1, 0);
+ hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, r);
+}
+
+static void hdmi_wp_video_config_timing(struct hdmi_ip_data *ip_data,
+ struct omap_video_timings *timings)
+{
+ u32 timing_h = 0;
+ u32 timing_v = 0;
+
+ pr_debug("Enter hdmi_wp_video_config_timing\n");
+
+ timing_h |= FLD_VAL(timings->hbp, 31, 20);
+ timing_h |= FLD_VAL(timings->hfp, 19, 8);
+ timing_h |= FLD_VAL(timings->hsw, 7, 0);
+ hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_TIMING_H, timing_h);
+
+ timing_v |= FLD_VAL(timings->vbp, 31, 20);
+ timing_v |= FLD_VAL(timings->vfp, 19, 8);
+ timing_v |= FLD_VAL(timings->vsw, 7, 0);
+ hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_TIMING_V, timing_v);
+}
+
+void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
+{
+ /* HDMI */
+ struct omap_video_timings video_timing;
+ struct hdmi_video_format video_format;
+ struct hdmi_video_interface video_interface;
+ /* HDMI core */
+ struct hdmi_core_infoframe_avi avi_cfg;
+ struct hdmi_core_video_config v_core_cfg;
+ struct hdmi_core_packet_enable_repeat repeat_cfg;
+ struct hdmi_config *cfg = &ip_data->cfg;
+
+ hdmi_wp_init(&video_timing, &video_format,
+ &video_interface);
+
+ hdmi_core_init(&v_core_cfg,
+ &avi_cfg,
+ &repeat_cfg);
+
+ hdmi_wp_video_init_format(&video_format, &video_timing, cfg);
+
+ hdmi_wp_video_config_timing(ip_data, &video_timing);
+
+ /* video config */
+ video_format.packing_mode = HDMI_PACK_24b_RGB_YUV444_YUV422;
+
+ hdmi_wp_video_config_format(ip_data, &video_format);
+
+ video_interface.vsp = cfg->timings.vsync_pol;
+ video_interface.hsp = cfg->timings.hsync_pol;
+ video_interface.interlacing = cfg->interlace;
+ video_interface.tm = 1 ; /* HDMI_TIMING_MASTER_24BIT */
+
+ hdmi_wp_video_config_interface(ip_data, &video_interface);
+
+ /*
+ * configure core video part
+ * set software reset in the core
+ */
+ hdmi_core_swreset_assert(ip_data);
+
+ /* power down off */
+ hdmi_core_powerdown_disable(ip_data);
+
+ v_core_cfg.pkt_mode = HDMI_PACKETMODE24BITPERPIXEL;
+ v_core_cfg.hdmi_dvi = cfg->cm.mode;
+
+ hdmi_core_video_config(ip_data, &v_core_cfg);
+
+ /* release software reset in the core */
+ hdmi_core_swreset_release(ip_data);
+
+ /*
+ * configure packet
+ * info frame video see doc CEA861-D page 65
+ */
+ avi_cfg.db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
+ avi_cfg.db1_active_info =
+ HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
+ avi_cfg.db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
+ avi_cfg.db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
+ avi_cfg.db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
+ avi_cfg.db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
+ avi_cfg.db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
+ avi_cfg.db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
+ avi_cfg.db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
+ avi_cfg.db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
+ avi_cfg.db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
+ avi_cfg.db4_videocode = cfg->cm.code;
+ avi_cfg.db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
+ avi_cfg.db6_7_line_eoftop = 0;
+ avi_cfg.db8_9_line_sofbottom = 0;
+ avi_cfg.db10_11_pixel_eofleft = 0;
+ avi_cfg.db12_13_pixel_sofright = 0;
+
+ hdmi_core_aux_infoframe_avi_config(ip_data, avi_cfg);
+
+ /* enable/repeat the infoframe */
+ repeat_cfg.avi_infoframe = HDMI_PACKETENABLE;
+ repeat_cfg.avi_infoframe_repeat = HDMI_PACKETREPEATON;
+ /* wakeup */
+ repeat_cfg.audio_pkt = HDMI_PACKETENABLE;
+ repeat_cfg.audio_pkt_repeat = HDMI_PACKETREPEATON;
+ hdmi_core_av_packet_config(ip_data, repeat_cfg);
+}
+
+void ti_hdmi_4xxx_wp_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r,\
+ hdmi_read_reg(hdmi_wp_base(ip_data), r))
+
+ DUMPREG(HDMI_WP_REVISION);
+ DUMPREG(HDMI_WP_SYSCONFIG);
+ DUMPREG(HDMI_WP_IRQSTATUS_RAW);
+ DUMPREG(HDMI_WP_IRQSTATUS);
+ DUMPREG(HDMI_WP_PWR_CTRL);
+ DUMPREG(HDMI_WP_IRQENABLE_SET);
+ DUMPREG(HDMI_WP_VIDEO_CFG);
+ DUMPREG(HDMI_WP_VIDEO_SIZE);
+ DUMPREG(HDMI_WP_VIDEO_TIMING_H);
+ DUMPREG(HDMI_WP_VIDEO_TIMING_V);
+ DUMPREG(HDMI_WP_WP_CLK);
+ DUMPREG(HDMI_WP_AUDIO_CFG);
+ DUMPREG(HDMI_WP_AUDIO_CFG2);
+ DUMPREG(HDMI_WP_AUDIO_CTRL);
+ DUMPREG(HDMI_WP_AUDIO_DATA);
+}
+
+void ti_hdmi_4xxx_pll_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
+{
+#define DUMPPLL(r) seq_printf(s, "%-35s %08x\n", #r,\
+ hdmi_read_reg(hdmi_pll_base(ip_data), r))
+
+ DUMPPLL(PLLCTRL_PLL_CONTROL);
+ DUMPPLL(PLLCTRL_PLL_STATUS);
+ DUMPPLL(PLLCTRL_PLL_GO);
+ DUMPPLL(PLLCTRL_CFG1);
+ DUMPPLL(PLLCTRL_CFG2);
+ DUMPPLL(PLLCTRL_CFG3);
+ DUMPPLL(PLLCTRL_CFG4);
+}
+
+void ti_hdmi_4xxx_core_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
+{
+ int i;
+
+#define CORE_REG(i, name) name(i)
+#define DUMPCORE(r) seq_printf(s, "%-35s %08x\n", #r,\
+ hdmi_read_reg(hdmi_pll_base(ip_data), r))
+#define DUMPCOREAV(i, r) seq_printf(s, "%s[%d]%*s %08x\n", #r, i, \
+ (i < 10) ? 32 - strlen(#r) : 31 - strlen(#r), " ", \
+ hdmi_read_reg(hdmi_pll_base(ip_data), CORE_REG(i, r)))
+
+ DUMPCORE(HDMI_CORE_SYS_VND_IDL);
+ DUMPCORE(HDMI_CORE_SYS_DEV_IDL);
+ DUMPCORE(HDMI_CORE_SYS_DEV_IDH);
+ DUMPCORE(HDMI_CORE_SYS_DEV_REV);
+ DUMPCORE(HDMI_CORE_SYS_SRST);
+ DUMPCORE(HDMI_CORE_CTRL1);
+ DUMPCORE(HDMI_CORE_SYS_SYS_STAT);
+ DUMPCORE(HDMI_CORE_SYS_VID_ACEN);
+ DUMPCORE(HDMI_CORE_SYS_VID_MODE);
+ DUMPCORE(HDMI_CORE_SYS_INTR_STATE);
+ DUMPCORE(HDMI_CORE_SYS_INTR1);
+ DUMPCORE(HDMI_CORE_SYS_INTR2);
+ DUMPCORE(HDMI_CORE_SYS_INTR3);
+ DUMPCORE(HDMI_CORE_SYS_INTR4);
+ DUMPCORE(HDMI_CORE_SYS_UMASK1);
+ DUMPCORE(HDMI_CORE_SYS_TMDS_CTRL);
+ DUMPCORE(HDMI_CORE_SYS_DE_DLY);
+ DUMPCORE(HDMI_CORE_SYS_DE_CTRL);
+ DUMPCORE(HDMI_CORE_SYS_DE_TOP);
+ DUMPCORE(HDMI_CORE_SYS_DE_CNTL);
+ DUMPCORE(HDMI_CORE_SYS_DE_CNTH);
+ DUMPCORE(HDMI_CORE_SYS_DE_LINL);
+ DUMPCORE(HDMI_CORE_SYS_DE_LINH_1);
+
+ DUMPCORE(HDMI_CORE_DDC_CMD);
+ DUMPCORE(HDMI_CORE_DDC_STATUS);
+ DUMPCORE(HDMI_CORE_DDC_ADDR);
+ DUMPCORE(HDMI_CORE_DDC_OFFSET);
+ DUMPCORE(HDMI_CORE_DDC_COUNT1);
+ DUMPCORE(HDMI_CORE_DDC_COUNT2);
+ DUMPCORE(HDMI_CORE_DDC_DATA);
+ DUMPCORE(HDMI_CORE_DDC_SEGM);
+
+ DUMPCORE(HDMI_CORE_AV_HDMI_CTRL);
+ DUMPCORE(HDMI_CORE_AV_DPD);
+ DUMPCORE(HDMI_CORE_AV_PB_CTRL1);
+ DUMPCORE(HDMI_CORE_AV_PB_CTRL2);
+ DUMPCORE(HDMI_CORE_AV_AVI_TYPE);
+ DUMPCORE(HDMI_CORE_AV_AVI_VERS);
+ DUMPCORE(HDMI_CORE_AV_AVI_LEN);
+ DUMPCORE(HDMI_CORE_AV_AVI_CHSUM);
+
+ for (i = 0; i < HDMI_CORE_AV_AVI_DBYTE_NELEMS; i++)
+ DUMPCOREAV(i, HDMI_CORE_AV_AVI_DBYTE);
+
+ for (i = 0; i < HDMI_CORE_AV_SPD_DBYTE_NELEMS; i++)
+ DUMPCOREAV(i, HDMI_CORE_AV_SPD_DBYTE);
+
+ for (i = 0; i < HDMI_CORE_AV_AUD_DBYTE_NELEMS; i++)
+ DUMPCOREAV(i, HDMI_CORE_AV_AUD_DBYTE);
+
+ for (i = 0; i < HDMI_CORE_AV_MPEG_DBYTE_NELEMS; i++)
+ DUMPCOREAV(i, HDMI_CORE_AV_MPEG_DBYTE);
+
+ for (i = 0; i < HDMI_CORE_AV_GEN_DBYTE_NELEMS; i++)
+ DUMPCOREAV(i, HDMI_CORE_AV_GEN_DBYTE);
+
+ for (i = 0; i < HDMI_CORE_AV_GEN2_DBYTE_NELEMS; i++)
+ DUMPCOREAV(i, HDMI_CORE_AV_GEN2_DBYTE);
+
+ DUMPCORE(HDMI_CORE_AV_ACR_CTRL);
+ DUMPCORE(HDMI_CORE_AV_FREQ_SVAL);
+ DUMPCORE(HDMI_CORE_AV_N_SVAL1);
+ DUMPCORE(HDMI_CORE_AV_N_SVAL2);
+ DUMPCORE(HDMI_CORE_AV_N_SVAL3);
+ DUMPCORE(HDMI_CORE_AV_CTS_SVAL1);
+ DUMPCORE(HDMI_CORE_AV_CTS_SVAL2);
+ DUMPCORE(HDMI_CORE_AV_CTS_SVAL3);
+ DUMPCORE(HDMI_CORE_AV_CTS_HVAL1);
+ DUMPCORE(HDMI_CORE_AV_CTS_HVAL2);
+ DUMPCORE(HDMI_CORE_AV_CTS_HVAL3);
+ DUMPCORE(HDMI_CORE_AV_AUD_MODE);
+ DUMPCORE(HDMI_CORE_AV_SPDIF_CTRL);
+ DUMPCORE(HDMI_CORE_AV_HW_SPDIF_FS);
+ DUMPCORE(HDMI_CORE_AV_SWAP_I2S);
+ DUMPCORE(HDMI_CORE_AV_SPDIF_ERTH);
+ DUMPCORE(HDMI_CORE_AV_I2S_IN_MAP);
+ DUMPCORE(HDMI_CORE_AV_I2S_IN_CTRL);
+ DUMPCORE(HDMI_CORE_AV_I2S_CHST0);
+ DUMPCORE(HDMI_CORE_AV_I2S_CHST1);
+ DUMPCORE(HDMI_CORE_AV_I2S_CHST2);
+ DUMPCORE(HDMI_CORE_AV_I2S_CHST4);
+ DUMPCORE(HDMI_CORE_AV_I2S_CHST5);
+ DUMPCORE(HDMI_CORE_AV_ASRC);
+ DUMPCORE(HDMI_CORE_AV_I2S_IN_LEN);
+ DUMPCORE(HDMI_CORE_AV_HDMI_CTRL);
+ DUMPCORE(HDMI_CORE_AV_AUDO_TXSTAT);
+ DUMPCORE(HDMI_CORE_AV_AUD_PAR_BUSCLK_1);
+ DUMPCORE(HDMI_CORE_AV_AUD_PAR_BUSCLK_2);
+ DUMPCORE(HDMI_CORE_AV_AUD_PAR_BUSCLK_3);
+ DUMPCORE(HDMI_CORE_AV_TEST_TXCTRL);
+ DUMPCORE(HDMI_CORE_AV_DPD);
+ DUMPCORE(HDMI_CORE_AV_PB_CTRL1);
+ DUMPCORE(HDMI_CORE_AV_PB_CTRL2);
+ DUMPCORE(HDMI_CORE_AV_AVI_TYPE);
+ DUMPCORE(HDMI_CORE_AV_AVI_VERS);
+ DUMPCORE(HDMI_CORE_AV_AVI_LEN);
+ DUMPCORE(HDMI_CORE_AV_AVI_CHSUM);
+ DUMPCORE(HDMI_CORE_AV_SPD_TYPE);
+ DUMPCORE(HDMI_CORE_AV_SPD_VERS);
+ DUMPCORE(HDMI_CORE_AV_SPD_LEN);
+ DUMPCORE(HDMI_CORE_AV_SPD_CHSUM);
+ DUMPCORE(HDMI_CORE_AV_AUDIO_TYPE);
+ DUMPCORE(HDMI_CORE_AV_AUDIO_VERS);
+ DUMPCORE(HDMI_CORE_AV_AUDIO_LEN);
+ DUMPCORE(HDMI_CORE_AV_AUDIO_CHSUM);
+ DUMPCORE(HDMI_CORE_AV_MPEG_TYPE);
+ DUMPCORE(HDMI_CORE_AV_MPEG_VERS);
+ DUMPCORE(HDMI_CORE_AV_MPEG_LEN);
+ DUMPCORE(HDMI_CORE_AV_MPEG_CHSUM);
+ DUMPCORE(HDMI_CORE_AV_CP_BYTE1);
+ DUMPCORE(HDMI_CORE_AV_CEC_ADDR_ID);
+}
+
+void ti_hdmi_4xxx_phy_dump(struct hdmi_ip_data *ip_data, struct seq_file *s)
+{
+#define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
+ hdmi_read_reg(hdmi_phy_base(ip_data), r))
+
+ DUMPPHY(HDMI_TXPHY_TX_CTRL);
+ DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL);
+ DUMPPHY(HDMI_TXPHY_POWER_CTRL);
+ DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
+}
+
+#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
+ defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+void hdmi_wp_audio_config_format(struct hdmi_ip_data *ip_data,
+ struct hdmi_audio_format *aud_fmt)
+{
+ u32 r;
+
+ DSSDBG("Enter hdmi_wp_audio_config_format\n");
+
+ r = hdmi_read_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CFG);
+ r = FLD_MOD(r, aud_fmt->stereo_channels, 26, 24);
+ r = FLD_MOD(r, aud_fmt->active_chnnls_msk, 23, 16);
+ r = FLD_MOD(r, aud_fmt->en_sig_blk_strt_end, 5, 5);
+ r = FLD_MOD(r, aud_fmt->type, 4, 4);
+ r = FLD_MOD(r, aud_fmt->justification, 3, 3);
+ r = FLD_MOD(r, aud_fmt->sample_order, 2, 2);
+ r = FLD_MOD(r, aud_fmt->samples_per_word, 1, 1);
+ r = FLD_MOD(r, aud_fmt->sample_size, 0, 0);
+ hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CFG, r);
+}
+
+void hdmi_wp_audio_config_dma(struct hdmi_ip_data *ip_data,
+ struct hdmi_audio_dma *aud_dma)
+{
+ u32 r;
+
+ DSSDBG("Enter hdmi_wp_audio_config_dma\n");
+
+ r = hdmi_read_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CFG2);
+ r = FLD_MOD(r, aud_dma->transfer_size, 15, 8);
+ r = FLD_MOD(r, aud_dma->block_size, 7, 0);
+ hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CFG2, r);
+
+ r = hdmi_read_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CTRL);
+ r = FLD_MOD(r, aud_dma->mode, 9, 9);
+ r = FLD_MOD(r, aud_dma->fifo_threshold, 8, 0);
+ hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_AUDIO_CTRL, r);
+}
+
+void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
+ struct hdmi_core_audio_config *cfg)
+{
+ u32 r;
+ void __iomem *av_base = hdmi_av_base(ip_data);
+
+ /* audio clock recovery parameters */
+ r = hdmi_read_reg(av_base, HDMI_CORE_AV_ACR_CTRL);
+ r = FLD_MOD(r, cfg->use_mclk, 2, 2);
+ r = FLD_MOD(r, cfg->en_acr_pkt, 1, 1);
+ r = FLD_MOD(r, cfg->cts_mode, 0, 0);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_ACR_CTRL, r);
+
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL1, cfg->n, 7, 0);
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL2, cfg->n >> 8, 7, 0);
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL3, cfg->n >> 16, 7, 0);
+
+ if (cfg->cts_mode == HDMI_AUDIO_CTS_MODE_SW) {
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_CTS_SVAL1, cfg->cts, 7, 0);
+ REG_FLD_MOD(av_base,
+ HDMI_CORE_AV_CTS_SVAL2, cfg->cts >> 8, 7, 0);
+ REG_FLD_MOD(av_base,
+ HDMI_CORE_AV_CTS_SVAL3, cfg->cts >> 16, 7, 0);
+ } else {
+ /*
+ * HDMI IP uses this configuration to divide the MCLK to
+ * update CTS value.
+ */
+ REG_FLD_MOD(av_base,
+ HDMI_CORE_AV_FREQ_SVAL, cfg->mclk_mode, 2, 0);
+
+ /* Configure clock for audio packets */
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_1,
+ cfg->aud_par_busclk, 7, 0);
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_2,
+ (cfg->aud_par_busclk >> 8), 7, 0);
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_3,
+ (cfg->aud_par_busclk >> 16), 7, 0);
+ }
+
+ /* Override of SPDIF sample frequency with value in I2S_CHST4 */
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_SPDIF_CTRL,
+ cfg->fs_override, 1, 1);
+
+ /* I2S parameters */
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_I2S_CHST4,
+ cfg->freq_sample, 3, 0);
+
+ r = hdmi_read_reg(av_base, HDMI_CORE_AV_I2S_IN_CTRL);
+ r = FLD_MOD(r, cfg->i2s_cfg.en_high_bitrate_aud, 7, 7);
+ r = FLD_MOD(r, cfg->i2s_cfg.sck_edge_mode, 6, 6);
+ r = FLD_MOD(r, cfg->i2s_cfg.cbit_order, 5, 5);
+ r = FLD_MOD(r, cfg->i2s_cfg.vbit, 4, 4);
+ r = FLD_MOD(r, cfg->i2s_cfg.ws_polarity, 3, 3);
+ r = FLD_MOD(r, cfg->i2s_cfg.justification, 2, 2);
+ r = FLD_MOD(r, cfg->i2s_cfg.direction, 1, 1);
+ r = FLD_MOD(r, cfg->i2s_cfg.shift, 0, 0);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_IN_CTRL, r);
+
+ r = hdmi_read_reg(av_base, HDMI_CORE_AV_I2S_CHST5);
+ r = FLD_MOD(r, cfg->freq_sample, 7, 4);
+ r = FLD_MOD(r, cfg->i2s_cfg.word_length, 3, 1);
+ r = FLD_MOD(r, cfg->i2s_cfg.word_max_length, 0, 0);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_I2S_CHST5, r);
+
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_I2S_IN_LEN,
+ cfg->i2s_cfg.in_length_bits, 3, 0);
+
+ /* Audio channels and mode parameters */
+ REG_FLD_MOD(av_base, HDMI_CORE_AV_HDMI_CTRL, cfg->layout, 2, 1);
+ r = hdmi_read_reg(av_base, HDMI_CORE_AV_AUD_MODE);
+ r = FLD_MOD(r, cfg->i2s_cfg.active_sds, 7, 4);
+ r = FLD_MOD(r, cfg->en_dsd_audio, 3, 3);
+ r = FLD_MOD(r, cfg->en_parallel_aud_input, 2, 2);
+ r = FLD_MOD(r, cfg->en_spdif, 1, 1);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_MODE, r);
+}
+
+void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
+ struct hdmi_core_infoframe_audio *info_aud)
+{
+ u8 val;
+ u8 sum = 0, checksum = 0;
+ void __iomem *av_base = hdmi_av_base(ip_data);
+
+ /*
+ * Set audio info frame type, version and length as
+ * described in HDMI 1.4a Section 8.2.2 specification.
+ * Checksum calculation is defined in Section 5.3.5.
+ */
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_TYPE, 0x84);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_VERS, 0x01);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_LEN, 0x0a);
+ sum += 0x84 + 0x001 + 0x00a;
+
+ val = (info_aud->db1_coding_type << 4)
+ | (info_aud->db1_channel_count - 1);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(0), val);
+ sum += val;
+
+ val = (info_aud->db2_sample_freq << 2) | info_aud->db2_sample_size;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(1), val);
+ sum += val;
+
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(2), 0x00);
+
+ val = info_aud->db4_channel_alloc;
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(3), val);
+ sum += val;
+
+ val = (info_aud->db5_downmix_inh << 7) | (info_aud->db5_lsv << 3);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(4), val);
+ sum += val;
+
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(5), 0x00);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(6), 0x00);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(7), 0x00);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(8), 0x00);
+ hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(9), 0x00);
+
+ checksum = 0x100 - sum;
+ hdmi_write_reg(av_base,
+ HDMI_CORE_AV_AUDIO_CHSUM, checksum);
+
+ /*
+ * TODO: Add MPEG and SPD enable and repeat cfg when EDID parsing
+ * is available.
+ */
+}
+
+int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
+ u32 sample_freq, u32 *n, u32 *cts)
+{
+ u32 r;
+ u32 deep_color = 0;
+ u32 pclk = ip_data->cfg.timings.timings.pixel_clock;
+
+ if (n == NULL || cts == NULL)
+ return -EINVAL;
+ /*
+ * Obtain current deep color configuration. This needed
+ * to calculate the TMDS clock based on the pixel clock.
+ */
+ r = REG_GET(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, 1, 0);
+ switch (r) {
+ case 1: /* No deep color selected */
+ deep_color = 100;
+ break;
+ case 2: /* 10-bit deep color selected */
+ deep_color = 125;
+ break;
+ case 3: /* 12-bit deep color selected */
+ deep_color = 150;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (sample_freq) {
+ case 32000:
+ if ((deep_color == 125) && ((pclk == 54054)
+ || (pclk == 74250)))
+ *n = 8192;
+ else
+ *n = 4096;
+ break;
+ case 44100:
+ *n = 6272;
+ break;
+ case 48000:
+ if ((deep_color == 125) && ((pclk == 54054)
+ || (pclk == 74250)))
+ *n = 8192;
+ else
+ *n = 6144;
+ break;
+ default:
+ *n = 0;
+ return -EINVAL;
+ }
+
+ /* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
+ *cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
+
+ return 0;
+}
+
+int hdmi_audio_trigger(struct hdmi_ip_data *ip_data,
+ struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ int err = 0;
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ REG_FLD_MOD(hdmi_av_base(ip_data),
+ HDMI_CORE_AV_AUD_MODE, 1, 0, 0);
+ REG_FLD_MOD(hdmi_wp_base(ip_data),
+ HDMI_WP_AUDIO_CTRL, 1, 31, 31);
+ REG_FLD_MOD(hdmi_wp_base(ip_data),
+ HDMI_WP_AUDIO_CTRL, 1, 30, 30);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ REG_FLD_MOD(hdmi_av_base(ip_data),
+ HDMI_CORE_AV_AUD_MODE, 0, 0, 0);
+ REG_FLD_MOD(hdmi_wp_base(ip_data),
+ HDMI_WP_AUDIO_CTRL, 0, 30, 30);
+ REG_FLD_MOD(hdmi_wp_base(ip_data),
+ HDMI_WP_AUDIO_CTRL, 0, 31, 31);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ return err;
+}
+#endif
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
new file mode 100644
index 0000000..2040956
--- /dev/null
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -0,0 +1,593 @@
+/*
+ * ti_hdmi_4xxx_ip.h
+ *
+ * HDMI header definition for DM81xx, DM38xx, TI OMAP4 etc processors.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _HDMI_TI_4xxx_H_
+#define _HDMI_TI_4xxx_H_
+
+#include <linux/string.h>
+#include <video/omapdss.h>
+#include "ti_hdmi.h"
+#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
+ defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#endif
+
+/* HDMI Wrapper */
+
+#define HDMI_WP_REVISION 0x0
+#define HDMI_WP_SYSCONFIG 0x10
+#define HDMI_WP_IRQSTATUS_RAW 0x24
+#define HDMI_WP_IRQSTATUS 0x28
+#define HDMI_WP_PWR_CTRL 0x40
+#define HDMI_WP_IRQENABLE_SET 0x2C
+#define HDMI_WP_VIDEO_CFG 0x50
+#define HDMI_WP_VIDEO_SIZE 0x60
+#define HDMI_WP_VIDEO_TIMING_H 0x68
+#define HDMI_WP_VIDEO_TIMING_V 0x6C
+#define HDMI_WP_WP_CLK 0x70
+#define HDMI_WP_AUDIO_CFG 0x80
+#define HDMI_WP_AUDIO_CFG2 0x84
+#define HDMI_WP_AUDIO_CTRL 0x88
+#define HDMI_WP_AUDIO_DATA 0x8C
+
+/* HDMI IP Core System */
+
+#define HDMI_CORE_SYS_VND_IDL 0x0
+#define HDMI_CORE_SYS_DEV_IDL 0x8
+#define HDMI_CORE_SYS_DEV_IDH 0xC
+#define HDMI_CORE_SYS_DEV_REV 0x10
+#define HDMI_CORE_SYS_SRST 0x14
+#define HDMI_CORE_CTRL1 0x20
+#define HDMI_CORE_SYS_SYS_STAT 0x24
+#define HDMI_CORE_SYS_VID_ACEN 0x124
+#define HDMI_CORE_SYS_VID_MODE 0x128
+#define HDMI_CORE_SYS_INTR_STATE 0x1C0
+#define HDMI_CORE_SYS_INTR1 0x1C4
+#define HDMI_CORE_SYS_INTR2 0x1C8
+#define HDMI_CORE_SYS_INTR3 0x1CC
+#define HDMI_CORE_SYS_INTR4 0x1D0
+#define HDMI_CORE_SYS_UMASK1 0x1D4
+#define HDMI_CORE_SYS_TMDS_CTRL 0x208
+#define HDMI_CORE_SYS_DE_DLY 0xC8
+#define HDMI_CORE_SYS_DE_CTRL 0xCC
+#define HDMI_CORE_SYS_DE_TOP 0xD0
+#define HDMI_CORE_SYS_DE_CNTL 0xD8
+#define HDMI_CORE_SYS_DE_CNTH 0xDC
+#define HDMI_CORE_SYS_DE_LINL 0xE0
+#define HDMI_CORE_SYS_DE_LINH_1 0xE4
+#define HDMI_CORE_CTRL1_VEN_FOLLOWVSYNC 0x1
+#define HDMI_CORE_CTRL1_HEN_FOLLOWHSYNC 0x1
+#define HDMI_CORE_CTRL1_BSEL_24BITBUS 0x1
+#define HDMI_CORE_CTRL1_EDGE_RISINGEDGE 0x1
+
+/* HDMI DDC E-DID */
+#define HDMI_CORE_DDC_CMD 0x3CC
+#define HDMI_CORE_DDC_STATUS 0x3C8
+#define HDMI_CORE_DDC_ADDR 0x3B4
+#define HDMI_CORE_DDC_OFFSET 0x3BC
+#define HDMI_CORE_DDC_COUNT1 0x3C0
+#define HDMI_CORE_DDC_COUNT2 0x3C4
+#define HDMI_CORE_DDC_DATA 0x3D0
+#define HDMI_CORE_DDC_SEGM 0x3B8
+
+/* HDMI IP Core Audio Video */
+
+#define HDMI_CORE_AV_HDMI_CTRL 0xBC
+#define HDMI_CORE_AV_DPD 0xF4
+#define HDMI_CORE_AV_PB_CTRL1 0xF8
+#define HDMI_CORE_AV_PB_CTRL2 0xFC
+#define HDMI_CORE_AV_AVI_TYPE 0x100
+#define HDMI_CORE_AV_AVI_VERS 0x104
+#define HDMI_CORE_AV_AVI_LEN 0x108
+#define HDMI_CORE_AV_AVI_CHSUM 0x10C
+#define HDMI_CORE_AV_AVI_DBYTE(n) (n * 4 + 0x110)
+#define HDMI_CORE_AV_AVI_DBYTE_NELEMS 15
+#define HDMI_CORE_AV_SPD_DBYTE(n) (n * 4 + 0x190)
+#define HDMI_CORE_AV_SPD_DBYTE_NELEMS 27
+#define HDMI_CORE_AV_AUD_DBYTE(n) (n * 4 + 0x210)
+#define HDMI_CORE_AV_AUD_DBYTE_NELEMS 10
+#define HDMI_CORE_AV_MPEG_DBYTE(n) (n * 4 + 0x290)
+#define HDMI_CORE_AV_MPEG_DBYTE_NELEMS 27
+#define HDMI_CORE_AV_GEN_DBYTE(n) (n * 4 + 0x300)
+#define HDMI_CORE_AV_GEN_DBYTE_NELEMS 31
+#define HDMI_CORE_AV_GEN2_DBYTE(n) (n * 4 + 0x380)
+#define HDMI_CORE_AV_GEN2_DBYTE_NELEMS 31
+#define HDMI_CORE_AV_ACR_CTRL 0x4
+#define HDMI_CORE_AV_FREQ_SVAL 0x8
+#define HDMI_CORE_AV_N_SVAL1 0xC
+#define HDMI_CORE_AV_N_SVAL2 0x10
+#define HDMI_CORE_AV_N_SVAL3 0x14
+#define HDMI_CORE_AV_CTS_SVAL1 0x18
+#define HDMI_CORE_AV_CTS_SVAL2 0x1C
+#define HDMI_CORE_AV_CTS_SVAL3 0x20
+#define HDMI_CORE_AV_CTS_HVAL1 0x24
+#define HDMI_CORE_AV_CTS_HVAL2 0x28
+#define HDMI_CORE_AV_CTS_HVAL3 0x2C
+#define HDMI_CORE_AV_AUD_MODE 0x50
+#define HDMI_CORE_AV_SPDIF_CTRL 0x54
+#define HDMI_CORE_AV_HW_SPDIF_FS 0x60
+#define HDMI_CORE_AV_SWAP_I2S 0x64
+#define HDMI_CORE_AV_SPDIF_ERTH 0x6C
+#define HDMI_CORE_AV_I2S_IN_MAP 0x70
+#define HDMI_CORE_AV_I2S_IN_CTRL 0x74
+#define HDMI_CORE_AV_I2S_CHST0 0x78
+#define HDMI_CORE_AV_I2S_CHST1 0x7C
+#define HDMI_CORE_AV_I2S_CHST2 0x80
+#define HDMI_CORE_AV_I2S_CHST4 0x84
+#define HDMI_CORE_AV_I2S_CHST5 0x88
+#define HDMI_CORE_AV_ASRC 0x8C
+#define HDMI_CORE_AV_I2S_IN_LEN 0x90
+#define HDMI_CORE_AV_HDMI_CTRL 0xBC
+#define HDMI_CORE_AV_AUDO_TXSTAT 0xC0
+#define HDMI_CORE_AV_AUD_PAR_BUSCLK_1 0xCC
+#define HDMI_CORE_AV_AUD_PAR_BUSCLK_2 0xD0
+#define HDMI_CORE_AV_AUD_PAR_BUSCLK_3 0xD4
+#define HDMI_CORE_AV_TEST_TXCTRL 0xF0
+#define HDMI_CORE_AV_DPD 0xF4
+#define HDMI_CORE_AV_PB_CTRL1 0xF8
+#define HDMI_CORE_AV_PB_CTRL2 0xFC
+#define HDMI_CORE_AV_AVI_TYPE 0x100
+#define HDMI_CORE_AV_AVI_VERS 0x104
+#define HDMI_CORE_AV_AVI_LEN 0x108
+#define HDMI_CORE_AV_AVI_CHSUM 0x10C
+#define HDMI_CORE_AV_SPD_TYPE 0x180
+#define HDMI_CORE_AV_SPD_VERS 0x184
+#define HDMI_CORE_AV_SPD_LEN 0x188
+#define HDMI_CORE_AV_SPD_CHSUM 0x18C
+#define HDMI_CORE_AV_AUDIO_TYPE 0x200
+#define HDMI_CORE_AV_AUDIO_VERS 0x204
+#define HDMI_CORE_AV_AUDIO_LEN 0x208
+#define HDMI_CORE_AV_AUDIO_CHSUM 0x20C
+#define HDMI_CORE_AV_MPEG_TYPE 0x280
+#define HDMI_CORE_AV_MPEG_VERS 0x284
+#define HDMI_CORE_AV_MPEG_LEN 0x288
+#define HDMI_CORE_AV_MPEG_CHSUM 0x28C
+#define HDMI_CORE_AV_CP_BYTE1 0x37C
+#define HDMI_CORE_AV_CEC_ADDR_ID 0x3FC
+#define HDMI_CORE_AV_SPD_DBYTE_ELSIZE 0x4
+#define HDMI_CORE_AV_GEN2_DBYTE_ELSIZE 0x4
+#define HDMI_CORE_AV_MPEG_DBYTE_ELSIZE 0x4
+#define HDMI_CORE_AV_GEN_DBYTE_ELSIZE 0x4
+
+/* PLL */
+
+#define PLLCTRL_PLL_CONTROL 0x0
+#define PLLCTRL_PLL_STATUS 0x4
+#define PLLCTRL_PLL_GO 0x8
+#define PLLCTRL_CFG1 0xC
+#define PLLCTRL_CFG2 0x10
+#define PLLCTRL_CFG3 0x14
+#define PLLCTRL_CFG4 0x20
+
+/* HDMI PHY */
+
+#define HDMI_TXPHY_TX_CTRL 0x0
+#define HDMI_TXPHY_DIGITAL_CTRL 0x4
+#define HDMI_TXPHY_POWER_CTRL 0x8
+#define HDMI_TXPHY_PAD_CFG_CTRL 0xC
+
+#define REG_FLD_MOD(base, idx, val, start, end) \
+ hdmi_write_reg(base, idx, FLD_MOD(hdmi_read_reg(base, idx),\
+ val, start, end))
+#define REG_GET(base, idx, start, end) \
+ FLD_GET(hdmi_read_reg(base, idx), start, end)
+
+enum hdmi_phy_pwr {
+ HDMI_PHYPWRCMD_OFF = 0,
+ HDMI_PHYPWRCMD_LDOON = 1,
+ HDMI_PHYPWRCMD_TXON = 2
+};
+
+enum hdmi_core_inputbus_width {
+ HDMI_INPUT_8BIT = 0,
+ HDMI_INPUT_10BIT = 1,
+ HDMI_INPUT_12BIT = 2
+};
+
+enum hdmi_core_dither_trunc {
+ HDMI_OUTPUTTRUNCATION_8BIT = 0,
+ HDMI_OUTPUTTRUNCATION_10BIT = 1,
+ HDMI_OUTPUTTRUNCATION_12BIT = 2,
+ HDMI_OUTPUTDITHER_8BIT = 3,
+ HDMI_OUTPUTDITHER_10BIT = 4,
+ HDMI_OUTPUTDITHER_12BIT = 5
+};
+
+enum hdmi_core_deepcolor_ed {
+ HDMI_DEEPCOLORPACKECTDISABLE = 0,
+ HDMI_DEEPCOLORPACKECTENABLE = 1
+};
+
+enum hdmi_core_packet_mode {
+ HDMI_PACKETMODERESERVEDVALUE = 0,
+ HDMI_PACKETMODE24BITPERPIXEL = 4,
+ HDMI_PACKETMODE30BITPERPIXEL = 5,
+ HDMI_PACKETMODE36BITPERPIXEL = 6,
+ HDMI_PACKETMODE48BITPERPIXEL = 7
+};
+
+enum hdmi_core_tclkselclkmult {
+ HDMI_FPLL05IDCK = 0,
+ HDMI_FPLL10IDCK = 1,
+ HDMI_FPLL20IDCK = 2,
+ HDMI_FPLL40IDCK = 3
+};
+
+enum hdmi_core_packet_ctrl {
+ HDMI_PACKETENABLE = 1,
+ HDMI_PACKETDISABLE = 0,
+ HDMI_PACKETREPEATON = 1,
+ HDMI_PACKETREPEATOFF = 0
+};
+
+/* INFOFRAME_AVI_ and INFOFRAME_AUDIO_ definitions */
+enum hdmi_core_infoframe {
+ HDMI_INFOFRAME_AVI_DB1Y_RGB = 0,
+ HDMI_INFOFRAME_AVI_DB1Y_YUV422 = 1,
+ HDMI_INFOFRAME_AVI_DB1Y_YUV444 = 2,
+ HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF = 0,
+ HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_ON = 1,
+ HDMI_INFOFRAME_AVI_DB1B_NO = 0,
+ HDMI_INFOFRAME_AVI_DB1B_VERT = 1,
+ HDMI_INFOFRAME_AVI_DB1B_HORI = 2,
+ HDMI_INFOFRAME_AVI_DB1B_VERTHORI = 3,
+ HDMI_INFOFRAME_AVI_DB1S_0 = 0,
+ HDMI_INFOFRAME_AVI_DB1S_1 = 1,
+ HDMI_INFOFRAME_AVI_DB1S_2 = 2,
+ HDMI_INFOFRAME_AVI_DB2C_NO = 0,
+ HDMI_INFOFRAME_AVI_DB2C_ITU601 = 1,
+ HDMI_INFOFRAME_AVI_DB2C_ITU709 = 2,
+ HDMI_INFOFRAME_AVI_DB2C_EC_EXTENDED = 3,
+ HDMI_INFOFRAME_AVI_DB2M_NO = 0,
+ HDMI_INFOFRAME_AVI_DB2M_43 = 1,
+ HDMI_INFOFRAME_AVI_DB2M_169 = 2,
+ HDMI_INFOFRAME_AVI_DB2R_SAME = 8,
+ HDMI_INFOFRAME_AVI_DB2R_43 = 9,
+ HDMI_INFOFRAME_AVI_DB2R_169 = 10,
+ HDMI_INFOFRAME_AVI_DB2R_149 = 11,
+ HDMI_INFOFRAME_AVI_DB3ITC_NO = 0,
+ HDMI_INFOFRAME_AVI_DB3ITC_YES = 1,
+ HDMI_INFOFRAME_AVI_DB3EC_XVYUV601 = 0,
+ HDMI_INFOFRAME_AVI_DB3EC_XVYUV709 = 1,
+ HDMI_INFOFRAME_AVI_DB3Q_DEFAULT = 0,
+ HDMI_INFOFRAME_AVI_DB3Q_LR = 1,
+ HDMI_INFOFRAME_AVI_DB3Q_FR = 2,
+ HDMI_INFOFRAME_AVI_DB3SC_NO = 0,
+ HDMI_INFOFRAME_AVI_DB3SC_HORI = 1,
+ HDMI_INFOFRAME_AVI_DB3SC_VERT = 2,
+ HDMI_INFOFRAME_AVI_DB3SC_HORIVERT = 3,
+ HDMI_INFOFRAME_AVI_DB5PR_NO = 0,
+ HDMI_INFOFRAME_AVI_DB5PR_2 = 1,
+ HDMI_INFOFRAME_AVI_DB5PR_3 = 2,
+ HDMI_INFOFRAME_AVI_DB5PR_4 = 3,
+ HDMI_INFOFRAME_AVI_DB5PR_5 = 4,
+ HDMI_INFOFRAME_AVI_DB5PR_6 = 5,
+ HDMI_INFOFRAME_AVI_DB5PR_7 = 6,
+ HDMI_INFOFRAME_AVI_DB5PR_8 = 7,
+ HDMI_INFOFRAME_AVI_DB5PR_9 = 8,
+ HDMI_INFOFRAME_AVI_DB5PR_10 = 9,
+ HDMI_INFOFRAME_AUDIO_DB1CT_FROM_STREAM = 0,
+ HDMI_INFOFRAME_AUDIO_DB1CT_IEC60958 = 1,
+ HDMI_INFOFRAME_AUDIO_DB1CT_AC3 = 2,
+ HDMI_INFOFRAME_AUDIO_DB1CT_MPEG1 = 3,
+ HDMI_INFOFRAME_AUDIO_DB1CT_MP3 = 4,
+ HDMI_INFOFRAME_AUDIO_DB1CT_MPEG2_MULTICH = 5,
+ HDMI_INFOFRAME_AUDIO_DB1CT_AAC = 6,
+ HDMI_INFOFRAME_AUDIO_DB1CT_DTS = 7,
+ HDMI_INFOFRAME_AUDIO_DB1CT_ATRAC = 8,
+ HDMI_INFOFRAME_AUDIO_DB1CT_ONEBIT = 9,
+ HDMI_INFOFRAME_AUDIO_DB1CT_DOLBY_DIGITAL_PLUS = 10,
+ HDMI_INFOFRAME_AUDIO_DB1CT_DTS_HD = 11,
+ HDMI_INFOFRAME_AUDIO_DB1CT_MAT = 12,
+ HDMI_INFOFRAME_AUDIO_DB1CT_DST = 13,
+ HDMI_INFOFRAME_AUDIO_DB1CT_WMA_PRO = 14,
+ HDMI_INFOFRAME_AUDIO_DB2SF_FROM_STREAM = 0,
+ HDMI_INFOFRAME_AUDIO_DB2SF_32000 = 1,
+ HDMI_INFOFRAME_AUDIO_DB2SF_44100 = 2,
+ HDMI_INFOFRAME_AUDIO_DB2SF_48000 = 3,
+ HDMI_INFOFRAME_AUDIO_DB2SF_88200 = 4,
+ HDMI_INFOFRAME_AUDIO_DB2SF_96000 = 5,
+ HDMI_INFOFRAME_AUDIO_DB2SF_176400 = 6,
+ HDMI_INFOFRAME_AUDIO_DB2SF_192000 = 7,
+ HDMI_INFOFRAME_AUDIO_DB2SS_FROM_STREAM = 0,
+ HDMI_INFOFRAME_AUDIO_DB2SS_16BIT = 1,
+ HDMI_INFOFRAME_AUDIO_DB2SS_20BIT = 2,
+ HDMI_INFOFRAME_AUDIO_DB2SS_24BIT = 3,
+ HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PERMITTED = 0,
+ HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PROHIBITED = 1
+};
+
+enum hdmi_packing_mode {
+ HDMI_PACK_10b_RGB_YUV444 = 0,
+ HDMI_PACK_24b_RGB_YUV444_YUV422 = 1,
+ HDMI_PACK_20b_YUV422 = 2,
+ HDMI_PACK_ALREADYPACKED = 7
+};
+
+enum hdmi_core_audio_sample_freq {
+ HDMI_AUDIO_FS_32000 = 0x3,
+ HDMI_AUDIO_FS_44100 = 0x0,
+ HDMI_AUDIO_FS_48000 = 0x2,
+ HDMI_AUDIO_FS_88200 = 0x8,
+ HDMI_AUDIO_FS_96000 = 0xA,
+ HDMI_AUDIO_FS_176400 = 0xC,
+ HDMI_AUDIO_FS_192000 = 0xE,
+ HDMI_AUDIO_FS_NOT_INDICATED = 0x1
+};
+
+enum hdmi_core_audio_layout {
+ HDMI_AUDIO_LAYOUT_2CH = 0,
+ HDMI_AUDIO_LAYOUT_8CH = 1
+};
+
+enum hdmi_core_cts_mode {
+ HDMI_AUDIO_CTS_MODE_HW = 0,
+ HDMI_AUDIO_CTS_MODE_SW = 1
+};
+
+enum hdmi_stereo_channels {
+ HDMI_AUDIO_STEREO_NOCHANNELS = 0,
+ HDMI_AUDIO_STEREO_ONECHANNEL = 1,
+ HDMI_AUDIO_STEREO_TWOCHANNELS = 2,
+ HDMI_AUDIO_STEREO_THREECHANNELS = 3,
+ HDMI_AUDIO_STEREO_FOURCHANNELS = 4
+};
+
+enum hdmi_audio_type {
+ HDMI_AUDIO_TYPE_LPCM = 0,
+ HDMI_AUDIO_TYPE_IEC = 1
+};
+
+enum hdmi_audio_justify {
+ HDMI_AUDIO_JUSTIFY_LEFT = 0,
+ HDMI_AUDIO_JUSTIFY_RIGHT = 1
+};
+
+enum hdmi_audio_sample_order {
+ HDMI_AUDIO_SAMPLE_RIGHT_FIRST = 0,
+ HDMI_AUDIO_SAMPLE_LEFT_FIRST = 1
+};
+
+enum hdmi_audio_samples_perword {
+ HDMI_AUDIO_ONEWORD_ONESAMPLE = 0,
+ HDMI_AUDIO_ONEWORD_TWOSAMPLES = 1
+};
+
+enum hdmi_audio_sample_size {
+ HDMI_AUDIO_SAMPLE_16BITS = 0,
+ HDMI_AUDIO_SAMPLE_24BITS = 1
+};
+
+enum hdmi_audio_transf_mode {
+ HDMI_AUDIO_TRANSF_DMA = 0,
+ HDMI_AUDIO_TRANSF_IRQ = 1
+};
+
+enum hdmi_audio_blk_strt_end_sig {
+ HDMI_AUDIO_BLOCK_SIG_STARTEND_ON = 0,
+ HDMI_AUDIO_BLOCK_SIG_STARTEND_OFF = 1
+};
+
+enum hdmi_audio_i2s_config {
+ HDMI_AUDIO_I2S_WS_POLARITY_LOW_IS_LEFT = 0,
+ HDMI_AUDIO_I2S_WS_POLARIT_YLOW_IS_RIGHT = 1,
+ HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST = 0,
+ HDMI_AUDIO_I2S_LSB_SHIFTED_FIRST = 1,
+ HDMI_AUDIO_I2S_MAX_WORD_20BITS = 0,
+ HDMI_AUDIO_I2S_MAX_WORD_24BITS = 1,
+ HDMI_AUDIO_I2S_CHST_WORD_NOT_SPECIFIED = 0,
+ HDMI_AUDIO_I2S_CHST_WORD_16_BITS = 1,
+ HDMI_AUDIO_I2S_CHST_WORD_17_BITS = 6,
+ HDMI_AUDIO_I2S_CHST_WORD_18_BITS = 2,
+ HDMI_AUDIO_I2S_CHST_WORD_19_BITS = 4,
+ HDMI_AUDIO_I2S_CHST_WORD_20_BITS_20MAX = 5,
+ HDMI_AUDIO_I2S_CHST_WORD_20_BITS_24MAX = 1,
+ HDMI_AUDIO_I2S_CHST_WORD_21_BITS = 6,
+ HDMI_AUDIO_I2S_CHST_WORD_22_BITS = 2,
+ HDMI_AUDIO_I2S_CHST_WORD_23_BITS = 4,
+ HDMI_AUDIO_I2S_CHST_WORD_24_BITS = 5,
+ HDMI_AUDIO_I2S_SCK_EDGE_FALLING = 0,
+ HDMI_AUDIO_I2S_SCK_EDGE_RISING = 1,
+ HDMI_AUDIO_I2S_VBIT_FOR_PCM = 0,
+ HDMI_AUDIO_I2S_VBIT_FOR_COMPRESSED = 1,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_NA = 0,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_16 = 2,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_17 = 12,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_18 = 4,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_19 = 8,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_20 = 10,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_21 = 13,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_22 = 5,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_23 = 9,
+ HDMI_AUDIO_I2S_INPUT_LENGTH_24 = 11,
+ HDMI_AUDIO_I2S_FIRST_BIT_SHIFT = 0,
+ HDMI_AUDIO_I2S_FIRST_BIT_NO_SHIFT = 1,
+ HDMI_AUDIO_I2S_SD0_EN = 1,
+ HDMI_AUDIO_I2S_SD1_EN = 1 << 1,
+ HDMI_AUDIO_I2S_SD2_EN = 1 << 2,
+ HDMI_AUDIO_I2S_SD3_EN = 1 << 3,
+};
+
+enum hdmi_audio_mclk_mode {
+ HDMI_AUDIO_MCLK_128FS = 0,
+ HDMI_AUDIO_MCLK_256FS = 1,
+ HDMI_AUDIO_MCLK_384FS = 2,
+ HDMI_AUDIO_MCLK_512FS = 3,
+ HDMI_AUDIO_MCLK_768FS = 4,
+ HDMI_AUDIO_MCLK_1024FS = 5,
+ HDMI_AUDIO_MCLK_1152FS = 6,
+ HDMI_AUDIO_MCLK_192FS = 7
+};
+
+struct hdmi_core_video_config {
+ enum hdmi_core_inputbus_width ip_bus_width;
+ enum hdmi_core_dither_trunc op_dither_truc;
+ enum hdmi_core_deepcolor_ed deep_color_pkt;
+ enum hdmi_core_packet_mode pkt_mode;
+ enum hdmi_core_hdmi_dvi hdmi_dvi;
+ enum hdmi_core_tclkselclkmult tclk_sel_clkmult;
+};
+
+/*
+ * Refer to section 8.2 in HDMI 1.3 specification for
+ * details about infoframe databytes
+ */
+struct hdmi_core_infoframe_avi {
+ /* Y0, Y1 rgb,yCbCr */
+ u8 db1_format;
+ /* A0 Active information Present */
+ u8 db1_active_info;
+ /* B0, B1 Bar info data valid */
+ u8 db1_bar_info_dv;
+ /* S0, S1 scan information */
+ u8 db1_scan_info;
+ /* C0, C1 colorimetry */
+ u8 db2_colorimetry;
+ /* M0, M1 Aspect ratio (4:3, 16:9) */
+ u8 db2_aspect_ratio;
+ /* R0...R3 Active format aspect ratio */
+ u8 db2_active_fmt_ar;
+ /* ITC IT content. */
+ u8 db3_itc;
+ /* EC0, EC1, EC2 Extended colorimetry */
+ u8 db3_ec;
+ /* Q1, Q0 Quantization range */
+ u8 db3_q_range;
+ /* SC1, SC0 Non-uniform picture scaling */
+ u8 db3_nup_scaling;
+ /* VIC0..6 Video format identification */
+ u8 db4_videocode;
+ /* PR0..PR3 Pixel repetition factor */
+ u8 db5_pixel_repeat;
+ /* Line number end of top bar */
+ u16 db6_7_line_eoftop;
+ /* Line number start of bottom bar */
+ u16 db8_9_line_sofbottom;
+ /* Pixel number end of left bar */
+ u16 db10_11_pixel_eofleft;
+ /* Pixel number start of right bar */
+ u16 db12_13_pixel_sofright;
+};
+/*
+ * Refer to section 8.2 in HDMI 1.3 specification for
+ * details about infoframe databytes
+ */
+struct hdmi_core_infoframe_audio {
+ u8 db1_coding_type;
+ u8 db1_channel_count;
+ u8 db2_sample_freq;
+ u8 db2_sample_size;
+ u8 db4_channel_alloc;
+ bool db5_downmix_inh;
+ u8 db5_lsv; /* Level shift values for downmix */
+};
+
+struct hdmi_core_packet_enable_repeat {
+ u32 audio_pkt;
+ u32 audio_pkt_repeat;
+ u32 avi_infoframe;
+ u32 avi_infoframe_repeat;
+ u32 gen_cntrl_pkt;
+ u32 gen_cntrl_pkt_repeat;
+ u32 generic_pkt;
+ u32 generic_pkt_repeat;
+};
+
+struct hdmi_video_format {
+ enum hdmi_packing_mode packing_mode;
+ u32 y_res; /* Line per panel */
+ u32 x_res; /* pixel per line */
+};
+
+struct hdmi_video_interface {
+ int vsp; /* Vsync polarity */
+ int hsp; /* Hsync polarity */
+ int interlacing;
+ int tm; /* Timing mode */
+};
+
+struct hdmi_audio_format {
+ enum hdmi_stereo_channels stereo_channels;
+ u8 active_chnnls_msk;
+ enum hdmi_audio_type type;
+ enum hdmi_audio_justify justification;
+ enum hdmi_audio_sample_order sample_order;
+ enum hdmi_audio_samples_perword samples_per_word;
+ enum hdmi_audio_sample_size sample_size;
+ enum hdmi_audio_blk_strt_end_sig en_sig_blk_strt_end;
+};
+
+struct hdmi_audio_dma {
+ u8 transfer_size;
+ u8 block_size;
+ enum hdmi_audio_transf_mode mode;
+ u16 fifo_threshold;
+};
+
+struct hdmi_core_audio_i2s_config {
+ u8 word_max_length;
+ u8 word_length;
+ u8 in_length_bits;
+ u8 justification;
+ u8 en_high_bitrate_aud;
+ u8 sck_edge_mode;
+ u8 cbit_order;
+ u8 vbit;
+ u8 ws_polarity;
+ u8 direction;
+ u8 shift;
+ u8 active_sds;
+};
+
+struct hdmi_core_audio_config {
+ struct hdmi_core_audio_i2s_config i2s_cfg;
+ enum hdmi_core_audio_sample_freq freq_sample;
+ bool fs_override;
+ u32 n;
+ u32 cts;
+ u32 aud_par_busclk;
+ enum hdmi_core_audio_layout layout;
+ enum hdmi_core_cts_mode cts_mode;
+ bool use_mclk;
+ enum hdmi_audio_mclk_mode mclk_mode;
+ bool en_acr_pkt;
+ bool en_dsd_audio;
+ bool en_parallel_aud_input;
+ bool en_spdif;
+};
+
+#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
+ defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
+int hdmi_audio_trigger(struct hdmi_ip_data *ip_data,
+ struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai);
+int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
+ u32 sample_freq, u32 *n, u32 *cts);
+void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data,
+ struct hdmi_core_infoframe_audio *info_aud);
+void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
+ struct hdmi_core_audio_config *cfg);
+void hdmi_wp_audio_config_dma(struct hdmi_ip_data *ip_data,
+ struct hdmi_audio_dma *aud_dma);
+void hdmi_wp_audio_config_format(struct hdmi_ip_data *ip_data,
+ struct hdmi_audio_format *aud_fmt);
+#endif
+#endif
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 173c664..7533458 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -295,7 +295,6 @@
u32 wss_data;
struct regulator *vdda_dac_reg;
- struct clk *tv_clk;
struct clk *tv_dac_clk;
} venc;
@@ -464,9 +463,11 @@
regulator_disable(venc.vdda_dac_reg);
}
-
-
-
+unsigned long venc_get_pixel_clock(void)
+{
+ /* VENC Pixel Clock in Mhz */
+ return 13500000;
+}
/* driver */
static int venc_panel_probe(struct omap_dss_device *dssdev)
@@ -732,22 +733,10 @@
{
struct clk *clk;
- clk = clk_get(&pdev->dev, "fck");
- if (IS_ERR(clk)) {
- DSSERR("can't get fck\n");
- return PTR_ERR(clk);
- }
-
- venc.tv_clk = clk;
-
if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK)) {
- if (cpu_is_omap34xx() || cpu_is_omap3630())
- clk = clk_get(&pdev->dev, "dss_96m_fck");
- else
- clk = clk_get(&pdev->dev, "tv_dac_clk");
+ clk = clk_get(&pdev->dev, "tv_dac_clk");
if (IS_ERR(clk)) {
DSSERR("can't get tv_dac_clk\n");
- clk_put(venc.tv_clk);
return PTR_ERR(clk);
}
} else {
@@ -761,8 +750,6 @@
static void venc_put_clocks(void)
{
- if (venc.tv_clk)
- clk_put(venc.tv_clk);
if (venc.tv_dac_clk)
clk_put(venc.tv_dac_clk);
}
@@ -838,7 +825,6 @@
{
if (venc.tv_dac_clk)
clk_disable(venc.tv_dac_clk);
- clk_disable(venc.tv_clk);
dispc_runtime_put();
dss_runtime_put();
@@ -858,7 +844,6 @@
if (r < 0)
goto err_get_dispc;
- clk_enable(venc.tv_clk);
if (venc.tv_dac_clk)
clk_enable(venc.tv_dac_clk);
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig
index aa33386..83d3fe7 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/omap2/omapfb/Kconfig
@@ -1,5 +1,5 @@
menuconfig FB_OMAP2
- tristate "OMAP2+ frame buffer support (EXPERIMENTAL)"
+ tristate "OMAP2+ frame buffer support"
depends on FB && OMAP2_DSS
select OMAP2_VRAM
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 602b71a..70aa47d 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -808,19 +808,15 @@
static void omapfb_calc_addr(const struct omapfb_info *ofbi,
const struct fb_var_screeninfo *var,
const struct fb_fix_screeninfo *fix,
- int rotation, u32 *paddr, void __iomem **vaddr)
+ int rotation, u32 *paddr)
{
u32 data_start_p;
- void __iomem *data_start_v;
int offset;
- if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
- data_start_v = NULL;
- } else {
+ else
data_start_p = omapfb_get_region_paddr(ofbi);
- data_start_v = omapfb_get_region_vaddr(ofbi);
- }
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
offset = calc_rotation_offset_vrfb(var, fix, rotation);
@@ -828,16 +824,14 @@
offset = calc_rotation_offset_dma(var, fix, rotation);
data_start_p += offset;
- data_start_v += offset;
if (offset)
DBG("offset %d, %d = %d\n",
var->xoffset, var->yoffset, offset);
- DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v);
+ DBG("paddr %x\n", data_start_p);
*paddr = data_start_p;
- *vaddr = data_start_v;
}
/* setup overlay according to the fb */
@@ -850,7 +844,6 @@
struct fb_fix_screeninfo *fix = &fbi->fix;
enum omap_color_mode mode = 0;
u32 data_start_p = 0;
- void __iomem *data_start_v = NULL;
struct omap_overlay_info info;
int xres, yres;
int screen_width;
@@ -880,8 +873,7 @@
}
if (ofbi->region->size)
- omapfb_calc_addr(ofbi, var, fix, rotation,
- &data_start_p, &data_start_v);
+ omapfb_calc_addr(ofbi, var, fix, rotation, &data_start_p);
r = fb_mode_to_dss_mode(var, &mode);
if (r) {
@@ -910,7 +902,6 @@
mirror = ofbi->mirror;
info.paddr = data_start_p;
- info.vaddr = data_start_v;
info.screen_width = screen_width;
info.width = xres;
info.height = yres;
@@ -2276,6 +2267,87 @@
return r;
}
+static void fb_videomode_to_omap_timings(struct fb_videomode *m,
+ struct omap_video_timings *t)
+{
+ t->x_res = m->xres;
+ t->y_res = m->yres;
+ t->pixel_clock = PICOS2KHZ(m->pixclock);
+ t->hsw = m->hsync_len;
+ t->hfp = m->right_margin;
+ t->hbp = m->left_margin;
+ t->vsw = m->vsync_len;
+ t->vfp = m->lower_margin;
+ t->vbp = m->upper_margin;
+}
+
+static int omapfb_find_best_mode(struct omap_dss_device *display,
+ struct omap_video_timings *timings)
+{
+ struct fb_monspecs *specs;
+ u8 *edid;
+ int r, i, best_xres, best_idx, len;
+
+ if (!display->driver->read_edid)
+ return -ENODEV;
+
+ len = 0x80 * 2;
+ edid = kmalloc(len, GFP_KERNEL);
+
+ r = display->driver->read_edid(display, edid, len);
+ if (r < 0)
+ goto err1;
+
+ specs = kzalloc(sizeof(*specs), GFP_KERNEL);
+
+ fb_edid_to_monspecs(edid, specs);
+
+ if (edid[126] > 0)
+ fb_edid_add_monspecs(edid + 0x80, specs);
+
+ best_xres = 0;
+ best_idx = -1;
+
+ for (i = 0; i < specs->modedb_len; ++i) {
+ struct fb_videomode *m;
+ struct omap_video_timings t;
+
+ m = &specs->modedb[i];
+
+ if (m->pixclock == 0)
+ continue;
+
+ /* skip repeated pixel modes */
+ if (m->xres == 2880 || m->xres == 1440)
+ continue;
+
+ fb_videomode_to_omap_timings(m, &t);
+
+ r = display->driver->check_timings(display, &t);
+ if (r == 0 && best_xres < m->xres) {
+ best_xres = m->xres;
+ best_idx = i;
+ }
+ }
+
+ if (best_xres == 0) {
+ r = -ENOENT;
+ goto err2;
+ }
+
+ fb_videomode_to_omap_timings(&specs->modedb[best_idx], timings);
+
+ r = 0;
+
+err2:
+ fb_destroy_modedb(specs->modedb);
+ kfree(specs);
+err1:
+ kfree(edid);
+
+ return r;
+}
+
static int omapfb_init_display(struct omapfb2_device *fbdev,
struct omap_dss_device *dssdev)
{
@@ -2373,8 +2445,10 @@
omap_dss_get_device(dssdev);
if (!dssdev->driver) {
- dev_err(&pdev->dev, "no driver for display\n");
- r = -ENODEV;
+ dev_warn(&pdev->dev, "no driver for display: %s\n",
+ dssdev->name);
+ omap_dss_put_device(dssdev);
+ continue;
}
d = &fbdev->displays[fbdev->num_displays++];
@@ -2402,9 +2476,27 @@
for (i = 0; i < fbdev->num_managers; i++)
fbdev->managers[i] = omap_dss_get_overlay_manager(i);
+ /* gfx overlay should be the default one. find a display
+ * connected to that, and use it as default display */
+ ovl = omap_dss_get_overlay(0);
+ if (ovl->manager && ovl->manager->device) {
+ def_display = ovl->manager->device;
+ } else {
+ dev_warn(&pdev->dev, "cannot find default display\n");
+ def_display = NULL;
+ }
+
if (def_mode && strlen(def_mode) > 0) {
if (omapfb_parse_def_modes(fbdev))
dev_warn(&pdev->dev, "cannot parse default modes\n");
+ } else if (def_display && def_display->driver->set_timings &&
+ def_display->driver->check_timings) {
+ struct omap_video_timings t;
+
+ r = omapfb_find_best_mode(def_display, &t);
+
+ if (r == 0)
+ def_display->driver->set_timings(def_display, &t);
}
r = omapfb_create_framebuffers(fbdev);
@@ -2421,16 +2513,6 @@
DBG("mgr->apply'ed\n");
- /* gfx overlay should be the default one. find a display
- * connected to that, and use it as default display */
- ovl = omap_dss_get_overlay(0);
- if (ovl->manager && ovl->manager->device) {
- def_display = ovl->manager->device;
- } else {
- dev_warn(&pdev->dev, "cannot find default display\n");
- def_display = NULL;
- }
-
if (def_display) {
r = omapfb_init_display(fbdev, def_display);
if (r) {
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index 153bf1a..1694d51 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -104,16 +104,14 @@
{
struct fb_info *fbi = dev_get_drvdata(dev);
struct omapfb_info *ofbi = FB2OFB(fbi);
- int mirror;
+ bool mirror;
int r;
struct fb_var_screeninfo new_var;
- r = kstrtoint(buf, 0, &mirror);
+ r = strtobool(buf, &mirror);
if (r)
return r;
- mirror = !!mirror;
-
if (!lock_fb_info(fbi))
return -ENODEV;
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index f27ae16..ae3caa6 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -490,7 +490,7 @@
/*
- * Parse user speficied options (`video=platinumfb:')
+ * Parse user specified options (`video=platinumfb:')
*/
static int __init platinumfb_setup(char *options)
{
@@ -683,7 +683,7 @@
.of_match_table = platinumfb_match,
},
.probe = platinumfb_probe,
- .remove = platinumfb_remove,
+ .remove = __devexit_p(platinumfb_remove),
};
static int __init platinumfb_init(void)
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 27f93aa..dc7bfa9 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -973,8 +973,8 @@
{
struct pm2fb_par *p = info->par;
u32 base;
- u32 depth = (var->bits_per_pixel + 7) & ~7;
- u32 xres = (var->xres + 31) & ~31;
+ u32 depth = (info->var.bits_per_pixel + 7) & ~7;
+ u32 xres = (info->var.xres + 31) & ~31;
depth = (depth > 32) ? 32 : depth;
base = to3264(var->yoffset * xres + var->xoffset, depth, 1);
@@ -1773,7 +1773,7 @@
#ifndef MODULE
/**
- * Parse user speficied options.
+ * Parse user specified options.
*
* This is, comma-separated options following `video=pm2fb:'.
*/
diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index 6666f45..6632ee5 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -1147,9 +1147,9 @@
struct fb_info *info)
{
struct pm3_par *par = info->par;
- const u32 xres = (var->xres + 31) & ~31;
+ const u32 xres = (info->var.xres + 31) & ~31;
- par->base = pm3fb_shift_bpp(var->bits_per_pixel,
+ par->base = pm3fb_shift_bpp(info->var.bits_per_pixel,
(var->yoffset * xres)
+ var->xoffset);
PM3_WAIT(par, 1);
@@ -1525,7 +1525,7 @@
{
char *this_opt;
- /* Parse user speficied options (`video=pm3fb:') */
+ /* Parse user specified options (`video=pm3fb:') */
if (!options || !*options)
return 0;
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index 5ec4f2d..50e0039 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
#include <linux/clk.h>
#include <linux/gfp.h>
#include <asm/uaccess.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "sdum.h"
#include "fbcommon.h"
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index 65560a1..213fbbc 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -1082,7 +1082,7 @@
}
retval = request_irq(ps3fb.irq_no, ps3fb_vsync_interrupt,
- IRQF_DISABLED, DEVICE_NAME, &dev->core);
+ 0, DEVICE_NAME, &dev->core);
if (retval) {
dev_err(&dev->core, "%s: request_irq failed %d\n", __func__,
retval);
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c
index 0283c70..1ed8b36 100644
--- a/drivers/video/pxa3xx-gcu.c
+++ b/drivers/video/pxa3xx-gcu.c
@@ -31,8 +31,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
-
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/miscdevice.h>
@@ -678,7 +676,7 @@
}
ret = request_irq(irq, pxa3xx_gcu_handle_irq,
- IRQF_DISABLED, DRV_NAME, priv);
+ 0, DRV_NAME, priv);
if (ret) {
dev_err(&dev->dev, "request_irq failed\n");
ret = -EBUSY;
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 0f4e8c9..1d1e4f1 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1309,16 +1309,6 @@
return 0;
}
#else
-int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds)
-{
- return 0;
-}
-
-int pxafb_smart_flush(struct fb_info *info)
-{
- return 0;
-}
-
static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; }
#endif /* CONFIG_FB_PXA_SMARTPANEL */
@@ -2191,7 +2181,7 @@
goto failed_free_mem;
}
- ret = request_irq(irq, pxafb_handle_irq, IRQF_DISABLED, "LCD", fbi);
+ ret = request_irq(irq, pxafb_handle_irq, 0, "LCD", fbi);
if (ret) {
dev_err(&dev->dev, "request_irq failed: %d\n", ret);
ret = -EBUSY;
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 4aecf21..0753b1c 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -81,6 +81,7 @@
* @palette: Address of palette memory, or 0 if none.
* @has_prtcon: Set if has PRTCON register.
* @has_shadowcon: Set if has SHADOWCON register.
+ * @has_clksel: Set if VIDCON0 register has CLKSEL bit.
*/
struct s3c_fb_variant {
unsigned int is_2443:1;
@@ -98,6 +99,7 @@
unsigned int has_prtcon:1;
unsigned int has_shadowcon:1;
+ unsigned int has_clksel:1;
};
/**
@@ -186,6 +188,7 @@
* @dev: The device that we bound to, for printing, etc.
* @regs_res: The resource we claimed for the IO registers.
* @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
+ * @lcd_clk: The clk (sclk) feeding pixclk.
* @regs: The mapped hardware registers.
* @variant: Variant information for this hardware.
* @enabled: A bitmask of enabled hardware windows.
@@ -200,6 +203,7 @@
struct device *dev;
struct resource *regs_res;
struct clk *bus_clk;
+ struct clk *lcd_clk;
void __iomem *regs;
struct s3c_fb_variant variant;
@@ -336,10 +340,15 @@
*/
static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
{
- unsigned long clk = clk_get_rate(sfb->bus_clk);
+ unsigned long clk;
unsigned long long tmp;
unsigned int result;
+ if (sfb->variant.has_clksel)
+ clk = clk_get_rate(sfb->bus_clk);
+ else
+ clk = clk_get_rate(sfb->lcd_clk);
+
tmp = (unsigned long long)clk;
tmp *= pixclk;
@@ -883,7 +892,7 @@
}
}
/* Offset in bytes to the end of the displayed area */
- end_boff = start_boff + var->yres * info->fix.line_length;
+ end_boff = start_boff + info->var.yres * info->fix.line_length;
/* Temporarily turn off per-vsync update from shadow registers until
* both start and end addresses are updated to prevent corruption */
@@ -1354,13 +1363,24 @@
clk_enable(sfb->bus_clk);
+ if (!sfb->variant.has_clksel) {
+ sfb->lcd_clk = clk_get(dev, "sclk_fimd");
+ if (IS_ERR(sfb->lcd_clk)) {
+ dev_err(dev, "failed to get lcd clock\n");
+ ret = PTR_ERR(sfb->lcd_clk);
+ goto err_bus_clk;
+ }
+
+ clk_enable(sfb->lcd_clk);
+ }
+
pm_runtime_enable(sfb->dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "failed to find registers\n");
ret = -ENOENT;
- goto err_clk;
+ goto err_lcd_clk;
}
sfb->regs_res = request_mem_region(res->start, resource_size(res),
@@ -1368,7 +1388,7 @@
if (!sfb->regs_res) {
dev_err(dev, "failed to claim register region\n");
ret = -ENOENT;
- goto err_clk;
+ goto err_lcd_clk;
}
sfb->regs = ioremap(res->start, resource_size(res));
@@ -1450,7 +1470,13 @@
err_req_region:
release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res));
-err_clk:
+err_lcd_clk:
+ if (!sfb->variant.has_clksel) {
+ clk_disable(sfb->lcd_clk);
+ clk_put(sfb->lcd_clk);
+ }
+
+err_bus_clk:
clk_disable(sfb->bus_clk);
clk_put(sfb->bus_clk);
@@ -1481,6 +1507,11 @@
iounmap(sfb->regs);
+ if (!sfb->variant.has_clksel) {
+ clk_disable(sfb->lcd_clk);
+ clk_put(sfb->lcd_clk);
+ }
+
clk_disable(sfb->bus_clk);
clk_put(sfb->bus_clk);
@@ -1510,6 +1541,9 @@
s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
}
+ if (!sfb->variant.has_clksel)
+ clk_disable(sfb->lcd_clk);
+
clk_disable(sfb->bus_clk);
return 0;
}
@@ -1524,6 +1558,9 @@
clk_enable(sfb->bus_clk);
+ if (!sfb->variant.has_clksel)
+ clk_enable(sfb->lcd_clk);
+
/* setup gpio and output polarity controls */
pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
@@ -1569,6 +1606,9 @@
s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
}
+ if (!sfb->variant.has_clksel)
+ clk_disable(sfb->lcd_clk);
+
clk_disable(sfb->bus_clk);
return 0;
}
@@ -1583,6 +1623,9 @@
clk_enable(sfb->bus_clk);
+ if (!sfb->variant.has_clksel)
+ clk_enable(sfb->lcd_clk);
+
/* setup gpio and output polarity controls */
pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
@@ -1755,6 +1798,7 @@
},
.has_prtcon = 1,
+ .has_clksel = 1,
},
.win[0] = &s3c_fb_data_64xx_wins[0],
.win[1] = &s3c_fb_data_64xx_wins[1],
@@ -1785,6 +1829,7 @@
},
.has_prtcon = 1,
+ .has_clksel = 1,
},
.win[0] = &s3c_fb_data_s5p_wins[0],
.win[1] = &s3c_fb_data_s5p_wins[1],
@@ -1815,6 +1860,37 @@
},
.has_shadowcon = 1,
+ .has_clksel = 1,
+ },
+ .win[0] = &s3c_fb_data_s5p_wins[0],
+ .win[1] = &s3c_fb_data_s5p_wins[1],
+ .win[2] = &s3c_fb_data_s5p_wins[2],
+ .win[3] = &s3c_fb_data_s5p_wins[3],
+ .win[4] = &s3c_fb_data_s5p_wins[4],
+};
+
+static struct s3c_fb_driverdata s3c_fb_data_exynos4 = {
+ .variant = {
+ .nr_windows = 5,
+ .vidtcon = VIDTCON0,
+ .wincon = WINCON(0),
+ .winmap = WINxMAP(0),
+ .keycon = WKEYCON,
+ .osd = VIDOSD_BASE,
+ .osd_stride = 16,
+ .buf_start = VIDW_BUF_START(0),
+ .buf_size = VIDW_BUF_SIZE(0),
+ .buf_end = VIDW_BUF_END(0),
+
+ .palette = {
+ [0] = 0x2400,
+ [1] = 0x2800,
+ [2] = 0x2c00,
+ [3] = 0x3000,
+ [4] = 0x3400,
+ },
+
+ .has_shadowcon = 1,
},
.win[0] = &s3c_fb_data_s5p_wins[0],
.win[1] = &s3c_fb_data_s5p_wins[1],
@@ -1843,6 +1919,7 @@
[0] = 0x400,
[1] = 0x800,
},
+ .has_clksel = 1,
},
.win[0] = &(struct s3c_fb_win_variant) {
.palette_sz = 256,
@@ -1859,6 +1936,30 @@
},
};
+static struct s3c_fb_driverdata s3c_fb_data_s5p64x0 = {
+ .variant = {
+ .nr_windows = 3,
+ .vidtcon = VIDTCON0,
+ .wincon = WINCON(0),
+ .winmap = WINxMAP(0),
+ .keycon = WKEYCON,
+ .osd = VIDOSD_BASE,
+ .osd_stride = 16,
+ .buf_start = VIDW_BUF_START(0),
+ .buf_size = VIDW_BUF_SIZE(0),
+ .buf_end = VIDW_BUF_END(0),
+
+ .palette = {
+ [0] = 0x2400,
+ [1] = 0x2800,
+ [2] = 0x2c00,
+ },
+ },
+ .win[0] = &s3c_fb_data_s5p_wins[0],
+ .win[1] = &s3c_fb_data_s5p_wins[1],
+ .win[2] = &s3c_fb_data_s5p_wins[2],
+};
+
static struct platform_device_id s3c_fb_driver_ids[] = {
{
.name = "s3c-fb",
@@ -1870,8 +1971,14 @@
.name = "s5pv210-fb",
.driver_data = (unsigned long)&s3c_fb_data_s5pv210,
}, {
+ .name = "exynos4-fb",
+ .driver_data = (unsigned long)&s3c_fb_data_exynos4,
+ }, {
.name = "s3c2443-fb",
.driver_data = (unsigned long)&s3c_fb_data_s3c2443,
+ }, {
+ .name = "s5p64x0-fb",
+ .driver_data = (unsigned long)&s3c_fb_data_s5p64x0,
},
{},
};
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 0aa1376..ee4c0df 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -767,7 +767,6 @@
static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
- struct cpufreq_freqs *freqs = data;
struct s3c2410fb_info *info;
struct fb_info *fbinfo;
long delta_f;
@@ -911,7 +910,7 @@
for (i = 0; i < 256; i++)
info->palette_buffer[i] = PALETTE_BUFF_CLEAR;
- ret = request_irq(irq, s3c2410fb_irq, IRQF_DISABLED, pdev->name, info);
+ ret = request_irq(irq, s3c2410fb_irq, 0, pdev->name, info);
if (ret) {
dev_err(&pdev->dev, "cannot get irq %d - err %d\n", irq, ret);
ret = -EBUSY;
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 4ca5d0c..946a949 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -1019,12 +1019,13 @@
unsigned int offset;
/* Calculate the offset */
- if (var->bits_per_pixel == 0) {
- offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2);
+ if (info->var.bits_per_pixel == 0) {
+ offset = (var->yoffset / 16) * (info->var.xres_virtual / 2)
+ + (var->xoffset / 2);
offset = offset >> 2;
} else {
offset = (var->yoffset * info->fix.line_length) +
- (var->xoffset * var->bits_per_pixel / 8);
+ (var->xoffset * info->var.bits_per_pixel / 8);
offset = offset >> 2;
}
@@ -1504,7 +1505,7 @@
.resume = s3_pci_resume,
};
-/* Parse user speficied options */
+/* Parse user specified options */
#ifndef MODULE
static int __init s3fb_setup(char *options)
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index e8b76d6..98d55d0 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1457,8 +1457,7 @@
if (ret)
goto failed;
- ret = request_irq(irq, sa1100fb_handle_irq, IRQF_DISABLED,
- "LCD", fbi);
+ ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi);
if (ret) {
printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
goto failed;
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 4de541c..beb4950 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -1477,15 +1477,9 @@
vgaHWProtect(par, 0);
}
-static void savagefb_update_start(struct savagefb_par *par,
- struct fb_var_screeninfo *var)
+static void savagefb_update_start(struct savagefb_par *par, int base)
{
- int base;
-
- base = ((var->yoffset * var->xres_virtual + (var->xoffset & ~1))
- * ((var->bits_per_pixel+7) / 8)) >> 2;
-
- /* now program the start address registers */
+ /* program the start address registers */
vga_out16(0x3d4, (base & 0x00ff00) | 0x0c, par);
vga_out16(0x3d4, ((base & 0x00ff) << 8) | 0x0d, par);
vga_out8(0x3d4, 0x69, par);
@@ -1550,8 +1544,12 @@
struct fb_info *info)
{
struct savagefb_par *par = info->par;
+ int base;
- savagefb_update_start(par, var);
+ base = (var->yoffset * info->fix.line_length
+ + (var->xoffset & ~1) * ((info->var.bits_per_pixel+7) / 8)) >> 2;
+
+ savagefb_update_start(par, base);
return 0;
}
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 7d54e2c..647ba98 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1111,6 +1111,7 @@
static void sh_hdmi_edid_work_fn(struct work_struct *work)
{
struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
+ struct fb_info *info;
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
struct sh_mobile_lcdc_chan *ch;
int ret;
@@ -1123,8 +1124,9 @@
mutex_lock(&hdmi->mutex);
+ info = hdmi->info;
+
if (hdmi->hp_state == HDMI_HOTPLUG_CONNECTED) {
- struct fb_info *info = hdmi->info;
unsigned long parent_rate = 0, hdmi_rate;
ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate);
@@ -1148,42 +1150,45 @@
ch = info->par;
- console_lock();
+ if (lock_fb_info(info)) {
+ console_lock();
- /* HDMI plug in */
- if (!sh_hdmi_must_reconfigure(hdmi) &&
- info->state == FBINFO_STATE_RUNNING) {
- /*
- * First activation with the default monitor - just turn
- * on, if we run a resume here, the logo disappears
- */
- if (lock_fb_info(info)) {
+ /* HDMI plug in */
+ if (!sh_hdmi_must_reconfigure(hdmi) &&
+ info->state == FBINFO_STATE_RUNNING) {
+ /*
+ * First activation with the default monitor - just turn
+ * on, if we run a resume here, the logo disappears
+ */
info->var.width = hdmi->var.width;
info->var.height = hdmi->var.height;
sh_hdmi_display_on(hdmi, info);
- unlock_fb_info(info);
+ } else {
+ /* New monitor or have to wake up */
+ fb_set_suspend(info, 0);
}
- } else {
- /* New monitor or have to wake up */
- fb_set_suspend(info, 0);
- }
- console_unlock();
+ console_unlock();
+ unlock_fb_info(info);
+ }
} else {
ret = 0;
- if (!hdmi->info)
+ if (!info)
goto out;
hdmi->monspec.modedb_len = 0;
fb_destroy_modedb(hdmi->monspec.modedb);
hdmi->monspec.modedb = NULL;
- console_lock();
+ if (lock_fb_info(info)) {
+ console_lock();
- /* HDMI disconnect */
- fb_set_suspend(hdmi->info, 1);
+ /* HDMI disconnect */
+ fb_set_suspend(info, 1);
- console_unlock();
+ console_unlock();
+ unlock_fb_info(info);
+ }
}
out:
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index b048417..3a41c01 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -24,39 +24,14 @@
#include <linux/backlight.h>
#include <linux/gpio.h>
#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mobile_meram.h>
#include <linux/atomic.h>
#include "sh_mobile_lcdcfb.h"
-#include "sh_mobile_meram.h"
#define SIDE_B_OFFSET 0x1000
#define MIRROR_OFFSET 0x2000
-/* shared registers */
-#define _LDDCKR 0x410
-#define _LDDCKSTPR 0x414
-#define _LDINTR 0x468
-#define _LDSR 0x46c
-#define _LDCNT1R 0x470
-#define _LDCNT2R 0x474
-#define _LDRCNTR 0x478
-#define _LDDDSR 0x47c
-#define _LDDWD0R 0x800
-#define _LDDRDR 0x840
-#define _LDDWAR 0x900
-#define _LDDRAR 0x904
-
-/* shared registers and their order for context save/restore */
-static int lcdc_shared_regs[] = {
- _LDDCKR,
- _LDDCKSTPR,
- _LDINTR,
- _LDDDSR,
- _LDCNT1R,
- _LDCNT2R,
-};
-#define NR_SHARED_REGS ARRAY_SIZE(lcdc_shared_regs)
-
#define MAX_XRES 1920
#define MAX_YRES 1080
@@ -98,22 +73,6 @@
[LDPMR] = 0x63c,
};
-#define START_LCDC 0x00000001
-#define LCDC_RESET 0x00000100
-#define DISPLAY_BEU 0x00000008
-#define LCDC_ENABLE 0x00000001
-#define LDINTR_FE 0x00000400
-#define LDINTR_VSE 0x00000200
-#define LDINTR_VEE 0x00000100
-#define LDINTR_FS 0x00000004
-#define LDINTR_VSS 0x00000002
-#define LDINTR_VES 0x00000001
-#define LDRCNTR_SRS 0x00020000
-#define LDRCNTR_SRC 0x00010000
-#define LDRCNTR_MRS 0x00000002
-#define LDRCNTR_MRC 0x00000001
-#define LDSR_MRS 0x00000100
-
static const struct fb_videomode default_720p = {
.name = "HDMI 720p",
.xres = 1280,
@@ -141,7 +100,6 @@
unsigned long lddckr;
struct sh_mobile_lcdc_chan ch[2];
struct notifier_block notifier;
- unsigned long saved_shared_regs[NR_SHARED_REGS];
int started;
int forced_bpp; /* 2 channel LCDC must share bpp setting */
struct sh_mobile_meram_info *meram_dev;
@@ -218,33 +176,36 @@
{
struct sh_mobile_lcdc_chan *ch = handle;
- lcdc_write(ch->lcdc, _LDDWD0R, data | 0x10000000);
- lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
- lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
- lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
+ lcdc_write(ch->lcdc, _LDDWD0R, data | LDDWDxR_WDACT);
+ lcdc_wait_bit(ch->lcdc, _LDSR, LDSR_AS, 0);
+ lcdc_write(ch->lcdc, _LDDWAR, LDDWAR_WA |
+ (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+ lcdc_wait_bit(ch->lcdc, _LDSR, LDSR_AS, 0);
}
static void lcdc_sys_write_data(void *handle, unsigned long data)
{
struct sh_mobile_lcdc_chan *ch = handle;
- lcdc_write(ch->lcdc, _LDDWD0R, data | 0x11000000);
- lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
- lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
- lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
+ lcdc_write(ch->lcdc, _LDDWD0R, data | LDDWDxR_WDACT | LDDWDxR_RSW);
+ lcdc_wait_bit(ch->lcdc, _LDSR, LDSR_AS, 0);
+ lcdc_write(ch->lcdc, _LDDWAR, LDDWAR_WA |
+ (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+ lcdc_wait_bit(ch->lcdc, _LDSR, LDSR_AS, 0);
}
static unsigned long lcdc_sys_read_data(void *handle)
{
struct sh_mobile_lcdc_chan *ch = handle;
- lcdc_write(ch->lcdc, _LDDRDR, 0x01000000);
- lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
- lcdc_write(ch->lcdc, _LDDRAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+ lcdc_write(ch->lcdc, _LDDRDR, LDDRDR_RSR);
+ lcdc_wait_bit(ch->lcdc, _LDSR, LDSR_AS, 0);
+ lcdc_write(ch->lcdc, _LDDRAR, LDDRAR_RA |
+ (lcdc_chan_is_sublcd(ch) ? 2 : 0));
udelay(1);
- lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
+ lcdc_wait_bit(ch->lcdc, _LDSR, LDSR_AS, 0);
- return lcdc_read(ch->lcdc, _LDDRDR) & 0x3ffff;
+ return lcdc_read(ch->lcdc, _LDDRDR) & LDDRDR_DRD_MASK;
}
struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = {
@@ -256,18 +217,22 @@
static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
{
if (atomic_inc_and_test(&priv->hw_usecnt)) {
- pm_runtime_get_sync(priv->dev);
if (priv->dot_clk)
clk_enable(priv->dot_clk);
+ pm_runtime_get_sync(priv->dev);
+ if (priv->meram_dev && priv->meram_dev->pdev)
+ pm_runtime_get_sync(&priv->meram_dev->pdev->dev);
}
}
static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
{
if (atomic_sub_return(1, &priv->hw_usecnt) == -1) {
+ if (priv->meram_dev && priv->meram_dev->pdev)
+ pm_runtime_put_sync(&priv->meram_dev->pdev->dev);
+ pm_runtime_put(priv->dev);
if (priv->dot_clk)
clk_disable(priv->dot_clk);
- pm_runtime_put(priv->dev);
}
}
@@ -319,13 +284,13 @@
if (bcfg->start_transfer)
bcfg->start_transfer(bcfg->board_data, ch,
&sh_mobile_lcdc_sys_bus_ops);
- lcdc_write_chan(ch, LDSM2R, 1);
+ lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
} else {
if (bcfg->start_transfer)
bcfg->start_transfer(bcfg->board_data, ch,
&sh_mobile_lcdc_sys_bus_ops);
- lcdc_write_chan(ch, LDSM2R, 1);
+ lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
}
}
@@ -341,22 +306,16 @@
{
struct sh_mobile_lcdc_priv *priv = data;
struct sh_mobile_lcdc_chan *ch;
- unsigned long tmp;
unsigned long ldintr;
int is_sub;
int k;
- /* acknowledge interrupt */
- ldintr = tmp = lcdc_read(priv, _LDINTR);
- /*
- * disable further VSYNC End IRQs, preserve all other enabled IRQs,
- * write 0 to bits 0-6 to ack all triggered IRQs.
- */
- tmp &= 0xffffff00 & ~LDINTR_VEE;
- lcdc_write(priv, _LDINTR, tmp);
+ /* Acknowledge interrupts and disable further VSYNC End IRQs. */
+ ldintr = lcdc_read(priv, _LDINTR);
+ lcdc_write(priv, _LDINTR, (ldintr ^ LDINTR_STATUS_MASK) & ~LDINTR_VEE);
/* figure out if this interrupt is for main or sub lcd */
- is_sub = (lcdc_read(priv, _LDSR) & (1 << 10)) ? 1 : 0;
+ is_sub = (lcdc_read(priv, _LDSR) & LDSR_MSS) ? 1 : 0;
/* wake up channel and disable clocks */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
@@ -365,7 +324,7 @@
if (!ch->enabled)
continue;
- /* Frame Start */
+ /* Frame End */
if (ldintr & LDINTR_FS) {
if (is_sub == lcdc_chan_is_sublcd(ch)) {
ch->frame_end = 1;
@@ -391,16 +350,17 @@
/* start or stop the lcdc */
if (start)
- lcdc_write(priv, _LDCNT2R, tmp | START_LCDC);
+ lcdc_write(priv, _LDCNT2R, tmp | LDCNT2R_DO);
else
- lcdc_write(priv, _LDCNT2R, tmp & ~START_LCDC);
+ lcdc_write(priv, _LDCNT2R, tmp & ~LDCNT2R_DO);
/* wait until power is applied/stopped on all channels */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
if (lcdc_read(priv, _LDCNT2R) & priv->ch[k].enabled)
while (1) {
- tmp = lcdc_read_chan(&priv->ch[k], LDPMR) & 3;
- if (start && tmp == 3)
+ tmp = lcdc_read_chan(&priv->ch[k], LDPMR)
+ & LDPMR_LPS;
+ if (start && tmp == LDPMR_LPS)
break;
if (!start && tmp == 0)
break;
@@ -418,13 +378,13 @@
u32 tmp;
tmp = ch->ldmt1r_value;
- tmp |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
- tmp |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? 1 << 26 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? 1 << 25 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? 1 << 24 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? 1 << 17 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? 1 << 16 : 0;
+ tmp |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : LDMT1R_VPOL;
+ tmp |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : LDMT1R_HPOL;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? LDMT1R_DWPOL : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? LDMT1R_DIPOL : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? LDMT1R_DAPOL : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? LDMT1R_HSCNT : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? LDMT1R_DWCNT : 0;
lcdc_write_chan(ch, LDMT1R, tmp);
/* setup SYS bus */
@@ -463,242 +423,239 @@
lcdc_write_chan(ch, LDHAJR, tmp);
}
-static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
+/*
+ * __sh_mobile_lcdc_start - Configure and tart the LCDC
+ * @priv: LCDC device
+ *
+ * Configure all enabled channels and start the LCDC device. All external
+ * devices (clocks, MERAM, panels, ...) are not touched by this function.
+ */
+static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
{
struct sh_mobile_lcdc_chan *ch;
- struct sh_mobile_lcdc_board_cfg *board_cfg;
unsigned long tmp;
int bpp = 0;
- unsigned long ldddsr;
- int k, m, ret;
+ int k, m;
- /* enable clocks before accessing the hardware */
- for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
- if (priv->ch[k].enabled) {
- sh_mobile_lcdc_clk_on(priv);
- if (!bpp)
- bpp = priv->ch[k].info->var.bits_per_pixel;
- }
- }
+ /* Enable LCDC channels. Read data from external memory, avoid using the
+ * BEU for now.
+ */
+ lcdc_write(priv, _LDCNT2R, priv->ch[0].enabled | priv->ch[1].enabled);
- /* reset */
- lcdc_write(priv, _LDCNT2R, lcdc_read(priv, _LDCNT2R) | LCDC_RESET);
- lcdc_wait_bit(priv, _LDCNT2R, LCDC_RESET, 0);
-
- /* enable LCDC channels */
- tmp = lcdc_read(priv, _LDCNT2R);
- tmp |= priv->ch[0].enabled;
- tmp |= priv->ch[1].enabled;
- lcdc_write(priv, _LDCNT2R, tmp);
-
- /* read data from external memory, avoid using the BEU for now */
- lcdc_write(priv, _LDCNT2R, lcdc_read(priv, _LDCNT2R) & ~DISPLAY_BEU);
-
- /* stop the lcdc first */
+ /* Stop the LCDC first and disable all interrupts. */
sh_mobile_lcdc_start_stop(priv, 0);
+ lcdc_write(priv, _LDINTR, 0);
- /* configure clocks */
+ /* Configure power supply, dot clocks and start them. */
tmp = priv->lddckr;
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
-
- if (!priv->ch[k].enabled)
+ if (!ch->enabled)
continue;
+ if (!bpp)
+ bpp = ch->info->var.bits_per_pixel;
+
+ /* Power supply */
+ lcdc_write_chan(ch, LDPMR, 0);
+
m = ch->cfg.clock_divider;
if (!m)
continue;
- if (m == 1)
- m = 1 << 6;
- tmp |= m << (lcdc_chan_is_sublcd(ch) ? 8 : 0);
-
- /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider denominator */
+ /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider
+ * denominator.
+ */
lcdc_write_chan(ch, LDDCKPAT1R, 0);
lcdc_write_chan(ch, LDDCKPAT2R, (1 << (m/2)) - 1);
+
+ if (m == 1)
+ m = LDDCKR_MOSEL;
+ tmp |= m << (lcdc_chan_is_sublcd(ch) ? 8 : 0);
}
lcdc_write(priv, _LDDCKR, tmp);
-
- /* start dotclock again */
lcdc_write(priv, _LDDCKSTPR, 0);
lcdc_wait_bit(priv, _LDDCKSTPR, ~0, 0);
- /* interrupts are disabled to begin with */
- lcdc_write(priv, _LDINTR, 0);
-
+ /* Setup geometry, format, frame buffer memory and operation mode. */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
-
if (!ch->enabled)
continue;
sh_mobile_lcdc_geometry(ch);
- /* power supply */
- lcdc_write_chan(ch, LDPMR, 0);
+ if (ch->info->var.nonstd) {
+ tmp = (ch->info->var.nonstd << 16);
+ switch (ch->info->var.bits_per_pixel) {
+ case 12:
+ tmp |= LDDFR_YF_420;
+ break;
+ case 16:
+ tmp |= LDDFR_YF_422;
+ break;
+ case 24:
+ default:
+ tmp |= LDDFR_YF_444;
+ break;
+ }
+ } else {
+ switch (ch->info->var.bits_per_pixel) {
+ case 16:
+ tmp = LDDFR_PKF_RGB16;
+ break;
+ case 24:
+ tmp = LDDFR_PKF_RGB24;
+ break;
+ case 32:
+ default:
+ tmp = LDDFR_PKF_ARGB32;
+ break;
+ }
+ }
+
+ lcdc_write_chan(ch, LDDFR, tmp);
+ lcdc_write_chan(ch, LDMLSR, ch->pitch);
+ lcdc_write_chan(ch, LDSA1R, ch->base_addr_y);
+ if (ch->info->var.nonstd)
+ lcdc_write_chan(ch, LDSA2R, ch->base_addr_c);
+
+ /* When using deferred I/O mode, configure the LCDC for one-shot
+ * operation and enable the frame end interrupt. Otherwise use
+ * continuous read mode.
+ */
+ if (ch->ldmt1r_value & LDMT1R_IFM &&
+ ch->cfg.sys_bus_cfg.deferred_io_msec) {
+ lcdc_write_chan(ch, LDSM1R, LDSM1R_OS);
+ lcdc_write(priv, _LDINTR, LDINTR_FE);
+ } else {
+ lcdc_write_chan(ch, LDSM1R, 0);
+ }
+ }
+
+ /* Word and long word swap. */
+ if (priv->ch[0].info->var.nonstd)
+ tmp = LDDDSR_LS | LDDDSR_WS | LDDDSR_BS;
+ else {
+ switch (bpp) {
+ case 16:
+ tmp = LDDDSR_LS | LDDDSR_WS;
+ break;
+ case 24:
+ tmp = LDDDSR_LS | LDDDSR_WS | LDDDSR_BS;
+ break;
+ case 32:
+ default:
+ tmp = LDDDSR_LS;
+ break;
+ }
+ }
+ lcdc_write(priv, _LDDDSR, tmp);
+
+ /* Enable the display output. */
+ lcdc_write(priv, _LDCNT1R, LDCNT1R_DE);
+ sh_mobile_lcdc_start_stop(priv, 1);
+ priv->started = 1;
+}
+
+static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
+{
+ struct sh_mobile_meram_info *mdev = priv->meram_dev;
+ struct sh_mobile_lcdc_board_cfg *board_cfg;
+ struct sh_mobile_lcdc_chan *ch;
+ unsigned long tmp;
+ int ret;
+ int k;
+
+ /* enable clocks before accessing the hardware */
+ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+ if (priv->ch[k].enabled)
+ sh_mobile_lcdc_clk_on(priv);
+ }
+
+ /* reset */
+ lcdc_write(priv, _LDCNT2R, lcdc_read(priv, _LDCNT2R) | LDCNT2R_BR);
+ lcdc_wait_bit(priv, _LDCNT2R, LDCNT2R_BR, 0);
+
+ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+ ch = &priv->ch[k];
+
+ if (!ch->enabled)
+ continue;
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->setup_sys) {
- ret = board_cfg->setup_sys(board_cfg->board_data,
- ch, &sh_mobile_lcdc_sys_bus_ops);
+ ret = board_cfg->setup_sys(board_cfg->board_data, ch,
+ &sh_mobile_lcdc_sys_bus_ops);
if (ret)
return ret;
}
}
- /* word and long word swap */
- ldddsr = lcdc_read(priv, _LDDDSR);
- if (priv->ch[0].info->var.nonstd)
- lcdc_write(priv, _LDDDSR, ldddsr | 7);
- else {
- switch (bpp) {
- case 16:
- lcdc_write(priv, _LDDDSR, ldddsr | 6);
- break;
- case 24:
- lcdc_write(priv, _LDDDSR, ldddsr | 7);
- break;
- case 32:
- lcdc_write(priv, _LDDDSR, ldddsr | 4);
- break;
- }
- }
-
+ /* Compute frame buffer base address and pitch for each channel. */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
- unsigned long base_addr_y;
- unsigned long base_addr_c = 0;
- int pitch;
- ch = &priv->ch[k];
+ struct sh_mobile_meram_cfg *cfg;
+ int pixelformat;
- if (!priv->ch[k].enabled)
+ ch = &priv->ch[k];
+ if (!ch->enabled)
continue;
- /* set bpp format in PKF[4:0] */
- tmp = lcdc_read_chan(ch, LDDFR);
- tmp &= ~0x0003031f;
- if (ch->info->var.nonstd) {
- tmp |= (ch->info->var.nonstd << 16);
- switch (ch->info->var.bits_per_pixel) {
- case 12:
- break;
- case 16:
- tmp |= (0x1 << 8);
- break;
- case 24:
- tmp |= (0x2 << 8);
- break;
- }
- } else {
- switch (ch->info->var.bits_per_pixel) {
- case 16:
- tmp |= 0x03;
- break;
- case 24:
- tmp |= 0x0b;
- break;
- case 32:
- break;
- }
- }
- lcdc_write_chan(ch, LDDFR, tmp);
+ ch->base_addr_y = ch->info->fix.smem_start;
+ ch->base_addr_c = ch->base_addr_y
+ + ch->info->var.xres
+ * ch->info->var.yres_virtual;
+ ch->pitch = ch->info->fix.line_length;
- base_addr_y = ch->info->fix.smem_start;
- base_addr_c = base_addr_y +
- ch->info->var.xres *
- ch->info->var.yres_virtual;
- pitch = ch->info->fix.line_length;
+ /* Enable MERAM if possible. */
+ cfg = ch->cfg.meram_cfg;
+ if (mdev == NULL || mdev->ops == NULL || cfg == NULL)
+ continue;
- /* test if we can enable meram */
- if (ch->cfg.meram_cfg && priv->meram_dev &&
- priv->meram_dev->ops) {
- struct sh_mobile_meram_cfg *cfg;
- struct sh_mobile_meram_info *mdev;
- unsigned long icb_addr_y, icb_addr_c;
- int icb_pitch;
- int pf;
-
- cfg = ch->cfg.meram_cfg;
- mdev = priv->meram_dev;
- /* we need to de-init configured ICBs before we
- * we can re-initialize them.
- */
- if (ch->meram_enabled)
- mdev->ops->meram_unregister(mdev, cfg);
-
+ /* we need to de-init configured ICBs before we can
+ * re-initialize them.
+ */
+ if (ch->meram_enabled) {
+ mdev->ops->meram_unregister(mdev, cfg);
ch->meram_enabled = 0;
-
- if (ch->info->var.nonstd) {
- if (ch->info->var.bits_per_pixel == 24)
- pf = SH_MOBILE_MERAM_PF_NV24;
- else
- pf = SH_MOBILE_MERAM_PF_NV;
- } else {
- pf = SH_MOBILE_MERAM_PF_RGB;
- }
-
- ret = mdev->ops->meram_register(mdev, cfg, pitch,
- ch->info->var.yres,
- pf,
- base_addr_y,
- base_addr_c,
- &icb_addr_y,
- &icb_addr_c,
- &icb_pitch);
- if (!ret) {
- /* set LDSA1R value */
- base_addr_y = icb_addr_y;
- pitch = icb_pitch;
-
- /* set LDSA2R value if required */
- if (base_addr_c)
- base_addr_c = icb_addr_c;
-
- ch->meram_enabled = 1;
- }
}
- /* point out our frame buffer */
- lcdc_write_chan(ch, LDSA1R, base_addr_y);
- if (ch->info->var.nonstd)
- lcdc_write_chan(ch, LDSA2R, base_addr_c);
+ if (!ch->info->var.nonstd)
+ pixelformat = SH_MOBILE_MERAM_PF_RGB;
+ else if (ch->info->var.bits_per_pixel == 24)
+ pixelformat = SH_MOBILE_MERAM_PF_NV24;
+ else
+ pixelformat = SH_MOBILE_MERAM_PF_NV;
- /* set line size */
- lcdc_write_chan(ch, LDMLSR, pitch);
-
- /* setup deferred io if SYS bus */
- tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
- if (ch->ldmt1r_value & (1 << 12) && tmp) {
- ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
- ch->defio.delay = msecs_to_jiffies(tmp);
- ch->info->fbdefio = &ch->defio;
- fb_deferred_io_init(ch->info);
-
- /* one-shot mode */
- lcdc_write_chan(ch, LDSM1R, 1);
-
- /* enable "Frame End Interrupt Enable" bit */
- lcdc_write(priv, _LDINTR, LDINTR_FE);
-
- } else {
- /* continuous read mode */
- lcdc_write_chan(ch, LDSM1R, 0);
- }
+ ret = mdev->ops->meram_register(mdev, cfg, ch->pitch,
+ ch->info->var.yres, pixelformat,
+ ch->base_addr_y, ch->base_addr_c,
+ &ch->base_addr_y, &ch->base_addr_c,
+ &ch->pitch);
+ if (!ret)
+ ch->meram_enabled = 1;
}
- /* display output */
- lcdc_write(priv, _LDCNT1R, LCDC_ENABLE);
+ /* Start the LCDC. */
+ __sh_mobile_lcdc_start(priv);
- /* start the lcdc */
- sh_mobile_lcdc_start_stop(priv, 1);
- priv->started = 1;
-
- /* tell the board code to enable the panel */
+ /* Setup deferred I/O, tell the board code to enable the panels, and
+ * turn backlight on.
+ */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
if (!ch->enabled)
continue;
+ tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
+ if (ch->ldmt1r_value & LDMT1R_IFM && tmp) {
+ ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
+ ch->defio.delay = msecs_to_jiffies(tmp);
+ ch->info->fbdefio = &ch->defio;
+ fb_deferred_io_init(ch->info);
+ }
+
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
board_cfg->display_on(board_cfg->board_data, ch->info);
@@ -776,42 +733,42 @@
static int sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
{
- int ifm, miftyp;
+ int interface_type = ch->cfg.interface_type;
- switch (ch->cfg.interface_type) {
- case RGB8: ifm = 0; miftyp = 0; break;
- case RGB9: ifm = 0; miftyp = 4; break;
- case RGB12A: ifm = 0; miftyp = 5; break;
- case RGB12B: ifm = 0; miftyp = 6; break;
- case RGB16: ifm = 0; miftyp = 7; break;
- case RGB18: ifm = 0; miftyp = 10; break;
- case RGB24: ifm = 0; miftyp = 11; break;
- case SYS8A: ifm = 1; miftyp = 0; break;
- case SYS8B: ifm = 1; miftyp = 1; break;
- case SYS8C: ifm = 1; miftyp = 2; break;
- case SYS8D: ifm = 1; miftyp = 3; break;
- case SYS9: ifm = 1; miftyp = 4; break;
- case SYS12: ifm = 1; miftyp = 5; break;
- case SYS16A: ifm = 1; miftyp = 7; break;
- case SYS16B: ifm = 1; miftyp = 8; break;
- case SYS16C: ifm = 1; miftyp = 9; break;
- case SYS18: ifm = 1; miftyp = 10; break;
- case SYS24: ifm = 1; miftyp = 11; break;
- default: goto bad;
+ switch (interface_type) {
+ case RGB8:
+ case RGB9:
+ case RGB12A:
+ case RGB12B:
+ case RGB16:
+ case RGB18:
+ case RGB24:
+ case SYS8A:
+ case SYS8B:
+ case SYS8C:
+ case SYS8D:
+ case SYS9:
+ case SYS12:
+ case SYS16A:
+ case SYS16B:
+ case SYS16C:
+ case SYS18:
+ case SYS24:
+ break;
+ default:
+ return -EINVAL;
}
/* SUBLCD only supports SYS interface */
if (lcdc_chan_is_sublcd(ch)) {
- if (ifm == 0)
- goto bad;
- else
- ifm = 0;
+ if (!(interface_type & LDMT1R_IFM))
+ return -EINVAL;
+
+ interface_type &= ~LDMT1R_IFM;
}
- ch->ldmt1r_value = (ifm << 12) | miftyp;
+ ch->ldmt1r_value = interface_type;
return 0;
- bad:
- return -EINVAL;
}
static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
@@ -819,18 +776,24 @@
struct sh_mobile_lcdc_priv *priv)
{
char *str;
- int icksel;
switch (clock_source) {
- case LCDC_CLK_BUS: str = "bus_clk"; icksel = 0; break;
- case LCDC_CLK_PERIPHERAL: str = "peripheral_clk"; icksel = 1; break;
- case LCDC_CLK_EXTERNAL: str = NULL; icksel = 2; break;
+ case LCDC_CLK_BUS:
+ str = "bus_clk";
+ priv->lddckr = LDDCKR_ICKSEL_BUS;
+ break;
+ case LCDC_CLK_PERIPHERAL:
+ str = "peripheral_clk";
+ priv->lddckr = LDDCKR_ICKSEL_MIPI;
+ break;
+ case LCDC_CLK_EXTERNAL:
+ str = NULL;
+ priv->lddckr = LDDCKR_ICKSEL_HDMI;
+ break;
default:
return -EINVAL;
}
- priv->lddckr = icksel << 16;
-
if (str) {
priv->dot_clk = clk_get(&pdev->dev, str);
if (IS_ERR(priv->dot_clk)) {
@@ -914,12 +877,12 @@
unsigned long base_addr_y, base_addr_c;
unsigned long c_offset;
- if (!var->nonstd)
- new_pan_offset = (var->yoffset * info->fix.line_length) +
- (var->xoffset * (info->var.bits_per_pixel / 8));
+ if (!info->var.nonstd)
+ new_pan_offset = var->yoffset * info->fix.line_length
+ + var->xoffset * (info->var.bits_per_pixel / 8);
else
- new_pan_offset = (var->yoffset * info->fix.line_length) +
- (var->xoffset);
+ new_pan_offset = var->yoffset * info->fix.line_length
+ + var->xoffset;
if (new_pan_offset == ch->pan_offset)
return 0; /* No change, do nothing */
@@ -928,45 +891,41 @@
/* Set the source address for the next refresh */
base_addr_y = ch->dma_handle + new_pan_offset;
- if (var->nonstd) {
+ if (info->var.nonstd) {
/* Set y offset */
- c_offset = (var->yoffset *
- info->fix.line_length *
- (info->var.bits_per_pixel - 8)) / 8;
- base_addr_c = ch->dma_handle + var->xres * var->yres_virtual +
- c_offset;
+ c_offset = var->yoffset * info->fix.line_length
+ * (info->var.bits_per_pixel - 8) / 8;
+ base_addr_c = ch->dma_handle
+ + info->var.xres * info->var.yres_virtual
+ + c_offset;
/* Set x offset */
if (info->var.bits_per_pixel == 24)
base_addr_c += 2 * var->xoffset;
else
base_addr_c += var->xoffset;
- } else
- base_addr_c = 0;
+ }
- if (!ch->meram_enabled) {
- lcdc_write_chan_mirror(ch, LDSA1R, base_addr_y);
- if (base_addr_c)
- lcdc_write_chan_mirror(ch, LDSA2R, base_addr_c);
- } else {
+ if (ch->meram_enabled) {
struct sh_mobile_meram_cfg *cfg;
struct sh_mobile_meram_info *mdev;
- unsigned long icb_addr_y, icb_addr_c;
int ret;
cfg = ch->cfg.meram_cfg;
mdev = priv->meram_dev;
ret = mdev->ops->meram_update(mdev, cfg,
base_addr_y, base_addr_c,
- &icb_addr_y, &icb_addr_c);
+ &base_addr_y, &base_addr_c);
if (ret)
return ret;
-
- lcdc_write_chan_mirror(ch, LDSA1R, icb_addr_y);
- if (icb_addr_c)
- lcdc_write_chan_mirror(ch, LDSA2R, icb_addr_c);
-
}
+ ch->base_addr_y = base_addr_y;
+ ch->base_addr_c = base_addr_c;
+
+ lcdc_write_chan_mirror(ch, LDSA1R, base_addr_y);
+ if (info->var.nonstd)
+ lcdc_write_chan_mirror(ch, LDSA2R, base_addr_c);
+
if (lcdc_chan_is_sublcd(ch))
lcdc_write(ch->lcdc, _LDRCNTR, ldrcntr ^ LDRCNTR_SRS);
else
@@ -985,9 +944,11 @@
unsigned long ldintr;
int ret;
- /* Enable VSync End interrupt */
+ /* Enable VSync End interrupt and be careful not to acknowledge any
+ * pending interrupt.
+ */
ldintr = lcdc_read(ch->lcdc, _LDINTR);
- ldintr |= LDINTR_VEE;
+ ldintr |= LDINTR_VEE | LDINTR_STATUS_MASK;
lcdc_write(ch->lcdc, _LDINTR, ldintr);
ret = wait_for_completion_interruptible_timeout(&ch->vsync_completion,
@@ -1037,11 +998,6 @@
/* Couldn't reconfigure, hopefully, can continue as before */
return;
- if (info->var.nonstd)
- info->fix.line_length = mode1.xres;
- else
- info->fix.line_length = mode1.xres * (ch->cfg.bpp / 8);
-
/*
* fb_set_var() calls the notifier change internally, only if
* FBINFO_MISC_USEREVENT flag is set. Since we do not want to fake a
@@ -1094,30 +1050,126 @@
{
struct sh_mobile_lcdc_chan *ch = info->par;
struct sh_mobile_lcdc_priv *p = ch->lcdc;
+ unsigned int best_dist = (unsigned int)-1;
+ unsigned int best_xres = 0;
+ unsigned int best_yres = 0;
+ unsigned int i;
- if (var->xres > MAX_XRES || var->yres > MAX_YRES ||
- var->xres * var->yres * (ch->cfg.bpp / 8) * 2 > info->fix.smem_len) {
- dev_warn(info->dev, "Invalid info: %u-%u-%u-%u x %u-%u-%u-%u @ %lukHz!\n",
- var->left_margin, var->xres, var->right_margin, var->hsync_len,
- var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
- PICOS2KHZ(var->pixclock));
+ if (var->xres > MAX_XRES || var->yres > MAX_YRES)
return -EINVAL;
+
+ /* If board code provides us with a list of available modes, make sure
+ * we use one of them. Find the mode closest to the requested one. The
+ * distance between two modes is defined as the size of the
+ * non-overlapping parts of the two rectangles.
+ */
+ for (i = 0; i < ch->cfg.num_cfg; ++i) {
+ const struct fb_videomode *mode = &ch->cfg.lcd_cfg[i];
+ unsigned int dist;
+
+ /* We can only round up. */
+ if (var->xres > mode->xres || var->yres > mode->yres)
+ continue;
+
+ dist = var->xres * var->yres + mode->xres * mode->yres
+ - 2 * min(var->xres, mode->xres)
+ * min(var->yres, mode->yres);
+
+ if (dist < best_dist) {
+ best_xres = mode->xres;
+ best_yres = mode->yres;
+ best_dist = dist;
+ }
}
+ /* If no available mode can be used, return an error. */
+ if (ch->cfg.num_cfg != 0) {
+ if (best_dist == (unsigned int)-1)
+ return -EINVAL;
+
+ var->xres = best_xres;
+ var->yres = best_yres;
+ }
+
+ /* Make sure the virtual resolution is at least as big as the visible
+ * resolution.
+ */
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if (var->bits_per_pixel <= 16) { /* RGB 565 */
+ var->bits_per_pixel = 16;
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ } else if (var->bits_per_pixel <= 24) { /* RGB 888 */
+ var->bits_per_pixel = 24;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ } else if (var->bits_per_pixel <= 32) { /* RGBA 888 */
+ var->bits_per_pixel = 32;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ } else
+ return -EINVAL;
+
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+
+ /* Make sure we don't exceed our allocated memory. */
+ if (var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8 >
+ info->fix.smem_len)
+ return -EINVAL;
+
/* only accept the forced_bpp for dual channel configurations */
if (p->forced_bpp && p->forced_bpp != var->bits_per_pixel)
return -EINVAL;
- switch (var->bits_per_pixel) {
- case 16: /* PKF[4:0] = 00011 - RGB 565 */
- case 24: /* PKF[4:0] = 01011 - RGB 888 */
- case 32: /* PKF[4:0] = 00000 - RGBA 888 */
- break;
- default:
- return -EINVAL;
+ return 0;
+}
+
+static int sh_mobile_set_par(struct fb_info *info)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ u32 line_length = info->fix.line_length;
+ int ret;
+
+ sh_mobile_lcdc_stop(ch->lcdc);
+
+ if (info->var.nonstd)
+ info->fix.line_length = info->var.xres;
+ else
+ info->fix.line_length = info->var.xres
+ * info->var.bits_per_pixel / 8;
+
+ ret = sh_mobile_lcdc_start(ch->lcdc);
+ if (ret < 0) {
+ dev_err(info->dev, "%s: unable to restart LCDC\n", __func__);
+ info->fix.line_length = line_length;
}
- return 0;
+ return ret;
}
/*
@@ -1177,6 +1229,7 @@
.fb_open = sh_mobile_open,
.fb_release = sh_mobile_release,
.fb_check_var = sh_mobile_check_var,
+ .fb_set_par = sh_mobile_set_par,
};
static int sh_mobile_lcdc_update_bl(struct backlight_device *bdev)
@@ -1238,66 +1291,6 @@
backlight_device_unregister(bdev);
}
-static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp,
- int nonstd)
-{
- if (nonstd) {
- switch (bpp) {
- case 12:
- case 16:
- case 24:
- var->bits_per_pixel = bpp;
- var->nonstd = nonstd;
- return 0;
- default:
- return -EINVAL;
- }
- }
-
- switch (bpp) {
- case 16: /* PKF[4:0] = 00011 - RGB 565 */
- var->red.offset = 11;
- var->red.length = 5;
- var->green.offset = 5;
- var->green.length = 6;
- var->blue.offset = 0;
- var->blue.length = 5;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
-
- case 24: /* PKF[4:0] = 01011 - RGB 888 */
- var->red.offset = 16;
- var->red.length = 8;
- var->green.offset = 8;
- var->green.length = 8;
- var->blue.offset = 0;
- var->blue.length = 8;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
-
- case 32: /* PKF[4:0] = 00000 - RGBA 888 */
- var->red.offset = 16;
- var->red.length = 8;
- var->green.offset = 8;
- var->green.length = 8;
- var->blue.offset = 0;
- var->blue.length = 8;
- var->transp.offset = 24;
- var->transp.length = 8;
- break;
- default:
- return -EINVAL;
- }
- var->bits_per_pixel = bpp;
- var->red.msb_right = 0;
- var->green.msb_right = 0;
- var->blue.msb_right = 0;
- var->transp.msb_right = 0;
- return 0;
-}
-
static int sh_mobile_lcdc_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1316,47 +1309,20 @@
static int sh_mobile_lcdc_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- struct sh_mobile_lcdc_priv *p = platform_get_drvdata(pdev);
- struct sh_mobile_lcdc_chan *ch;
- int k, n;
-
- /* save per-channel registers */
- for (k = 0; k < ARRAY_SIZE(p->ch); k++) {
- ch = &p->ch[k];
- if (!ch->enabled)
- continue;
- for (n = 0; n < NR_CH_REGS; n++)
- ch->saved_ch_regs[n] = lcdc_read_chan(ch, n);
- }
-
- /* save shared registers */
- for (n = 0; n < NR_SHARED_REGS; n++)
- p->saved_shared_regs[n] = lcdc_read(p, lcdc_shared_regs[n]);
+ struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev);
/* turn off LCDC hardware */
- lcdc_write(p, _LDCNT1R, 0);
+ lcdc_write(priv, _LDCNT1R, 0);
+
return 0;
}
static int sh_mobile_lcdc_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- struct sh_mobile_lcdc_priv *p = platform_get_drvdata(pdev);
- struct sh_mobile_lcdc_chan *ch;
- int k, n;
+ struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev);
- /* restore per-channel registers */
- for (k = 0; k < ARRAY_SIZE(p->ch); k++) {
- ch = &p->ch[k];
- if (!ch->enabled)
- continue;
- for (n = 0; n < NR_CH_REGS; n++)
- lcdc_write_chan(ch, n, ch->saved_ch_regs[n]);
- }
-
- /* restore shared registers */
- for (n = 0; n < NR_SHARED_REGS; n++)
- lcdc_write(p, lcdc_shared_regs[n], p->saved_shared_regs[n]);
+ __sh_mobile_lcdc_start(priv);
return 0;
}
@@ -1408,263 +1374,6 @@
return NOTIFY_OK;
}
-static int sh_mobile_lcdc_remove(struct platform_device *pdev);
-
-static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
-{
- struct fb_info *info;
- struct sh_mobile_lcdc_priv *priv;
- struct sh_mobile_lcdc_info *pdata = pdev->dev.platform_data;
- struct resource *res;
- int error;
- void *buf;
- int i, j;
-
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- i = platform_get_irq(pdev, 0);
- if (!res || i < 0) {
- dev_err(&pdev->dev, "cannot get platform resources\n");
- return -ENOENT;
- }
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(&pdev->dev, "cannot allocate device data\n");
- return -ENOMEM;
- }
-
- platform_set_drvdata(pdev, priv);
-
- error = request_irq(i, sh_mobile_lcdc_irq, IRQF_DISABLED,
- dev_name(&pdev->dev), priv);
- if (error) {
- dev_err(&pdev->dev, "unable to request irq\n");
- goto err1;
- }
-
- priv->irq = i;
- atomic_set(&priv->hw_usecnt, -1);
-
- j = 0;
- for (i = 0; i < ARRAY_SIZE(pdata->ch); i++) {
- struct sh_mobile_lcdc_chan *ch = priv->ch + j;
-
- ch->lcdc = priv;
- memcpy(&ch->cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
-
- error = sh_mobile_lcdc_check_interface(ch);
- if (error) {
- dev_err(&pdev->dev, "unsupported interface type\n");
- goto err1;
- }
- init_waitqueue_head(&ch->frame_end_wait);
- init_completion(&ch->vsync_completion);
- ch->pan_offset = 0;
-
- /* probe the backlight is there is one defined */
- if (ch->cfg.bl_info.max_brightness)
- ch->bl = sh_mobile_lcdc_bl_probe(&pdev->dev, ch);
-
- switch (pdata->ch[i].chan) {
- case LCDC_CHAN_MAINLCD:
- ch->enabled = 1 << 1;
- ch->reg_offs = lcdc_offs_mainlcd;
- j++;
- break;
- case LCDC_CHAN_SUBLCD:
- ch->enabled = 1 << 2;
- ch->reg_offs = lcdc_offs_sublcd;
- j++;
- break;
- }
- }
-
- if (!j) {
- dev_err(&pdev->dev, "no channels defined\n");
- error = -EINVAL;
- goto err1;
- }
-
- /* for dual channel LCDC (MAIN + SUB) force shared bpp setting */
- if (j == 2)
- priv->forced_bpp = pdata->ch[0].bpp;
-
- priv->base = ioremap_nocache(res->start, resource_size(res));
- if (!priv->base)
- goto err1;
-
- error = sh_mobile_lcdc_setup_clocks(pdev, pdata->clock_source, priv);
- if (error) {
- dev_err(&pdev->dev, "unable to setup clocks\n");
- goto err1;
- }
-
- priv->meram_dev = pdata->meram_dev;
-
- for (i = 0; i < j; i++) {
- struct fb_var_screeninfo *var;
- const struct fb_videomode *lcd_cfg, *max_cfg = NULL;
- struct sh_mobile_lcdc_chan *ch = priv->ch + i;
- struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
- const struct fb_videomode *mode = cfg->lcd_cfg;
- unsigned long max_size = 0;
- int k;
- int num_cfg;
-
- ch->info = framebuffer_alloc(0, &pdev->dev);
- if (!ch->info) {
- dev_err(&pdev->dev, "unable to allocate fb_info\n");
- error = -ENOMEM;
- break;
- }
-
- info = ch->info;
- var = &info->var;
- info->fbops = &sh_mobile_lcdc_ops;
- info->par = ch;
-
- mutex_init(&ch->open_lock);
-
- for (k = 0, lcd_cfg = mode;
- k < cfg->num_cfg && lcd_cfg;
- k++, lcd_cfg++) {
- unsigned long size = lcd_cfg->yres * lcd_cfg->xres;
- /* NV12 buffers must have even number of lines */
- if ((cfg->nonstd) && cfg->bpp == 12 &&
- (lcd_cfg->yres & 0x1)) {
- dev_err(&pdev->dev, "yres must be multiple of 2"
- " for YCbCr420 mode.\n");
- error = -EINVAL;
- goto err1;
- }
-
- if (size > max_size) {
- max_cfg = lcd_cfg;
- max_size = size;
- }
- }
-
- if (!mode)
- max_size = MAX_XRES * MAX_YRES;
- else if (max_cfg)
- dev_dbg(&pdev->dev, "Found largest videomode %ux%u\n",
- max_cfg->xres, max_cfg->yres);
-
- info->fix = sh_mobile_lcdc_fix;
- info->fix.smem_len = max_size * 2 * cfg->bpp / 8;
-
- /* Only pan in 2 line steps for NV12 */
- if (cfg->nonstd && cfg->bpp == 12)
- info->fix.ypanstep = 2;
-
- if (!mode) {
- mode = &default_720p;
- num_cfg = 1;
- } else {
- num_cfg = cfg->num_cfg;
- }
-
- fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
-
- fb_videomode_to_var(var, mode);
- var->width = cfg->lcd_size_cfg.width;
- var->height = cfg->lcd_size_cfg.height;
- /* Default Y virtual resolution is 2x panel size */
- var->yres_virtual = var->yres * 2;
- var->activate = FB_ACTIVATE_NOW;
-
- error = sh_mobile_lcdc_set_bpp(var, cfg->bpp, cfg->nonstd);
- if (error)
- break;
-
- buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
- &ch->dma_handle, GFP_KERNEL);
- if (!buf) {
- dev_err(&pdev->dev, "unable to allocate buffer\n");
- error = -ENOMEM;
- break;
- }
-
- info->pseudo_palette = &ch->pseudo_palette;
- info->flags = FBINFO_FLAG_DEFAULT;
-
- error = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
- if (error < 0) {
- dev_err(&pdev->dev, "unable to allocate cmap\n");
- dma_free_coherent(&pdev->dev, info->fix.smem_len,
- buf, ch->dma_handle);
- break;
- }
-
- info->fix.smem_start = ch->dma_handle;
- if (var->nonstd)
- info->fix.line_length = var->xres;
- else
- info->fix.line_length = var->xres * (cfg->bpp / 8);
-
- info->screen_base = buf;
- info->device = &pdev->dev;
- ch->display_var = *var;
- }
-
- if (error)
- goto err1;
-
- error = sh_mobile_lcdc_start(priv);
- if (error) {
- dev_err(&pdev->dev, "unable to start hardware\n");
- goto err1;
- }
-
- for (i = 0; i < j; i++) {
- struct sh_mobile_lcdc_chan *ch = priv->ch + i;
-
- info = ch->info;
-
- if (info->fbdefio) {
- ch->sglist = vmalloc(sizeof(struct scatterlist) *
- info->fix.smem_len >> PAGE_SHIFT);
- if (!ch->sglist) {
- dev_err(&pdev->dev, "cannot allocate sglist\n");
- goto err1;
- }
- }
-
- info->bl_dev = ch->bl;
-
- error = register_framebuffer(info);
- if (error < 0)
- goto err1;
-
- dev_info(info->dev,
- "registered %s/%s as %dx%d %dbpp.\n",
- pdev->name,
- (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
- "mainlcd" : "sublcd",
- info->var.xres, info->var.yres,
- ch->cfg.bpp);
-
- /* deferred io mode: disable clock to save power */
- if (info->fbdefio || info->state == FBINFO_STATE_SUSPENDED)
- sh_mobile_lcdc_clk_off(priv);
- }
-
- /* Failure ignored */
- priv->notifier.notifier_call = sh_mobile_lcdc_notify;
- fb_register_client(&priv->notifier);
-
- return 0;
-err1:
- sh_mobile_lcdc_remove(pdev);
-
- return error;
-}
-
static int sh_mobile_lcdc_remove(struct platform_device *pdev)
{
struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev);
@@ -1716,6 +1425,279 @@
return 0;
}
+static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
+ struct device *dev)
+{
+ struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
+ const struct fb_videomode *max_mode;
+ const struct fb_videomode *mode;
+ struct fb_var_screeninfo *var;
+ struct fb_info *info;
+ unsigned int max_size;
+ int num_cfg;
+ void *buf;
+ int ret;
+ int i;
+
+ mutex_init(&ch->open_lock);
+
+ /* Allocate the frame buffer device. */
+ ch->info = framebuffer_alloc(0, dev);
+ if (!ch->info) {
+ dev_err(dev, "unable to allocate fb_info\n");
+ return -ENOMEM;
+ }
+
+ info = ch->info;
+ info->fbops = &sh_mobile_lcdc_ops;
+ info->par = ch;
+ info->pseudo_palette = &ch->pseudo_palette;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ /* Iterate through the modes to validate them and find the highest
+ * resolution.
+ */
+ max_mode = NULL;
+ max_size = 0;
+
+ for (i = 0, mode = cfg->lcd_cfg; i < cfg->num_cfg; i++, mode++) {
+ unsigned int size = mode->yres * mode->xres;
+
+ /* NV12 buffers must have even number of lines */
+ if ((cfg->nonstd) && cfg->bpp == 12 &&
+ (mode->yres & 0x1)) {
+ dev_err(dev, "yres must be multiple of 2 for YCbCr420 "
+ "mode.\n");
+ return -EINVAL;
+ }
+
+ if (size > max_size) {
+ max_mode = mode;
+ max_size = size;
+ }
+ }
+
+ if (!max_size)
+ max_size = MAX_XRES * MAX_YRES;
+ else
+ dev_dbg(dev, "Found largest videomode %ux%u\n",
+ max_mode->xres, max_mode->yres);
+
+ /* Initialize fixed screen information. Restrict pan to 2 lines steps
+ * for NV12.
+ */
+ info->fix = sh_mobile_lcdc_fix;
+ info->fix.smem_len = max_size * 2 * cfg->bpp / 8;
+ if (cfg->nonstd && cfg->bpp == 12)
+ info->fix.ypanstep = 2;
+
+ /* Create the mode list. */
+ if (cfg->lcd_cfg == NULL) {
+ mode = &default_720p;
+ num_cfg = 1;
+ } else {
+ mode = cfg->lcd_cfg;
+ num_cfg = cfg->num_cfg;
+ }
+
+ fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
+
+ /* Initialize variable screen information using the first mode as
+ * default. The default Y virtual resolution is twice the panel size to
+ * allow for double-buffering.
+ */
+ var = &info->var;
+ fb_videomode_to_var(var, mode);
+ var->bits_per_pixel = cfg->bpp;
+ var->width = cfg->lcd_size_cfg.width;
+ var->height = cfg->lcd_size_cfg.height;
+ var->yres_virtual = var->yres * 2;
+ var->activate = FB_ACTIVATE_NOW;
+
+ ret = sh_mobile_check_var(var, info);
+ if (ret)
+ return ret;
+
+ /* Allocate frame buffer memory and color map. */
+ buf = dma_alloc_coherent(dev, info->fix.smem_len, &ch->dma_handle,
+ GFP_KERNEL);
+ if (!buf) {
+ dev_err(dev, "unable to allocate buffer\n");
+ return -ENOMEM;
+ }
+
+ ret = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
+ if (ret < 0) {
+ dev_err(dev, "unable to allocate cmap\n");
+ dma_free_coherent(dev, info->fix.smem_len,
+ buf, ch->dma_handle);
+ return ret;
+ }
+
+ info->fix.smem_start = ch->dma_handle;
+ if (var->nonstd)
+ info->fix.line_length = var->xres;
+ else
+ info->fix.line_length = var->xres * (cfg->bpp / 8);
+
+ info->screen_base = buf;
+ info->device = dev;
+ ch->display_var = *var;
+
+ return 0;
+}
+
+static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
+{
+ struct sh_mobile_lcdc_info *pdata = pdev->dev.platform_data;
+ struct sh_mobile_lcdc_priv *priv;
+ struct resource *res;
+ int num_channels;
+ int error;
+ int i;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i = platform_get_irq(pdev, 0);
+ if (!res || i < 0) {
+ dev_err(&pdev->dev, "cannot get platform resources\n");
+ return -ENOENT;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "cannot allocate device data\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ error = request_irq(i, sh_mobile_lcdc_irq, 0,
+ dev_name(&pdev->dev), priv);
+ if (error) {
+ dev_err(&pdev->dev, "unable to request irq\n");
+ goto err1;
+ }
+
+ priv->irq = i;
+ atomic_set(&priv->hw_usecnt, -1);
+
+ for (i = 0, num_channels = 0; i < ARRAY_SIZE(pdata->ch); i++) {
+ struct sh_mobile_lcdc_chan *ch = priv->ch + num_channels;
+
+ ch->lcdc = priv;
+ memcpy(&ch->cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
+
+ error = sh_mobile_lcdc_check_interface(ch);
+ if (error) {
+ dev_err(&pdev->dev, "unsupported interface type\n");
+ goto err1;
+ }
+ init_waitqueue_head(&ch->frame_end_wait);
+ init_completion(&ch->vsync_completion);
+ ch->pan_offset = 0;
+
+ /* probe the backlight is there is one defined */
+ if (ch->cfg.bl_info.max_brightness)
+ ch->bl = sh_mobile_lcdc_bl_probe(&pdev->dev, ch);
+
+ switch (pdata->ch[i].chan) {
+ case LCDC_CHAN_MAINLCD:
+ ch->enabled = LDCNT2R_ME;
+ ch->reg_offs = lcdc_offs_mainlcd;
+ num_channels++;
+ break;
+ case LCDC_CHAN_SUBLCD:
+ ch->enabled = LDCNT2R_SE;
+ ch->reg_offs = lcdc_offs_sublcd;
+ num_channels++;
+ break;
+ }
+ }
+
+ if (!num_channels) {
+ dev_err(&pdev->dev, "no channels defined\n");
+ error = -EINVAL;
+ goto err1;
+ }
+
+ /* for dual channel LCDC (MAIN + SUB) force shared bpp setting */
+ if (num_channels == 2)
+ priv->forced_bpp = pdata->ch[0].bpp;
+
+ priv->base = ioremap_nocache(res->start, resource_size(res));
+ if (!priv->base)
+ goto err1;
+
+ error = sh_mobile_lcdc_setup_clocks(pdev, pdata->clock_source, priv);
+ if (error) {
+ dev_err(&pdev->dev, "unable to setup clocks\n");
+ goto err1;
+ }
+
+ priv->meram_dev = pdata->meram_dev;
+
+ for (i = 0; i < num_channels; i++) {
+ struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+
+ error = sh_mobile_lcdc_channel_init(ch, &pdev->dev);
+ if (error)
+ goto err1;
+ }
+
+ error = sh_mobile_lcdc_start(priv);
+ if (error) {
+ dev_err(&pdev->dev, "unable to start hardware\n");
+ goto err1;
+ }
+
+ for (i = 0; i < num_channels; i++) {
+ struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+ struct fb_info *info = ch->info;
+
+ if (info->fbdefio) {
+ ch->sglist = vmalloc(sizeof(struct scatterlist) *
+ info->fix.smem_len >> PAGE_SHIFT);
+ if (!ch->sglist) {
+ dev_err(&pdev->dev, "cannot allocate sglist\n");
+ goto err1;
+ }
+ }
+
+ info->bl_dev = ch->bl;
+
+ error = register_framebuffer(info);
+ if (error < 0)
+ goto err1;
+
+ dev_info(info->dev,
+ "registered %s/%s as %dx%d %dbpp.\n",
+ pdev->name,
+ (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
+ "mainlcd" : "sublcd",
+ info->var.xres, info->var.yres,
+ ch->cfg.bpp);
+
+ /* deferred io mode: disable clock to save power */
+ if (info->fbdefio || info->state == FBINFO_STATE_SUSPENDED)
+ sh_mobile_lcdc_clk_off(priv);
+ }
+
+ /* Failure ignored */
+ priv->notifier.notifier_call = sh_mobile_lcdc_notify;
+ fb_register_client(&priv->notifier);
+
+ return 0;
+err1:
+ sh_mobile_lcdc_remove(pdev);
+
+ return error;
+}
+
static struct platform_driver sh_mobile_lcdc_driver = {
.driver = {
.name = "sh_mobile_lcdc_fb",
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index aeed668..a58a0f3 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -18,6 +18,13 @@
struct fb_info;
struct backlight_device;
+/*
+ * struct sh_mobile_lcdc_chan - LCDC display channel
+ *
+ * @base_addr_y: Frame buffer viewport base address (luma component)
+ * @base_addr_c: Frame buffer viewport base address (chroma component)
+ * @pitch: Frame buffer line pitch
+ */
struct sh_mobile_lcdc_chan {
struct sh_mobile_lcdc_priv *lcdc;
unsigned long *reg_offs;
@@ -25,7 +32,6 @@
unsigned long enabled; /* ME and SE in LDCNT2R */
struct sh_mobile_lcdc_chan_cfg cfg;
u32 pseudo_palette[PALETTE_NR];
- unsigned long saved_ch_regs[NR_CH_REGS];
struct fb_info *info;
struct backlight_device *bl;
dma_addr_t dma_handle;
@@ -40,6 +46,10 @@
int blank_status;
struct mutex open_lock; /* protects the use counter */
int meram_enabled;
+
+ unsigned long base_addr_y;
+ unsigned long base_addr_c;
+ unsigned int pitch;
};
#endif
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index cc7d732..4d63490 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -12,29 +12,103 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/pm_runtime.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-
-#include "sh_mobile_meram.h"
+#include <video/sh_mobile_meram.h>
/* meram registers */
-#define MExxCTL 0x0
-#define MExxBSIZE 0x4
-#define MExxMNCF 0x8
-#define MExxSARA 0x10
-#define MExxSARB 0x14
-#define MExxSBSIZE 0x18
+#define MEVCR1 0x4
+#define MEVCR1_RST (1 << 31)
+#define MEVCR1_WD (1 << 30)
+#define MEVCR1_AMD1 (1 << 29)
+#define MEVCR1_AMD0 (1 << 28)
+#define MEQSEL1 0x40
+#define MEQSEL2 0x44
-#define MERAM_MExxCTL_VAL(ctl, next_icb, addr) \
- ((ctl) | (((next_icb) & 0x1f) << 11) | (((addr) & 0x7ff) << 16))
-#define MERAM_MExxBSIZE_VAL(a, b, c) \
- (((a) << 28) | ((b) << 16) | (c))
+#define MExxCTL 0x400
+#define MExxCTL_BV (1 << 31)
+#define MExxCTL_BSZ_SHIFT 28
+#define MExxCTL_MSAR_MASK (0x7ff << MExxCTL_MSAR_SHIFT)
+#define MExxCTL_MSAR_SHIFT 16
+#define MExxCTL_NXT_MASK (0x1f << MExxCTL_NXT_SHIFT)
+#define MExxCTL_NXT_SHIFT 11
+#define MExxCTL_WD1 (1 << 10)
+#define MExxCTL_WD0 (1 << 9)
+#define MExxCTL_WS (1 << 8)
+#define MExxCTL_CB (1 << 7)
+#define MExxCTL_WBF (1 << 6)
+#define MExxCTL_WF (1 << 5)
+#define MExxCTL_RF (1 << 4)
+#define MExxCTL_CM (1 << 3)
+#define MExxCTL_MD_READ (1 << 0)
+#define MExxCTL_MD_WRITE (2 << 0)
+#define MExxCTL_MD_ICB_WB (3 << 0)
+#define MExxCTL_MD_ICB (4 << 0)
+#define MExxCTL_MD_FB (7 << 0)
+#define MExxCTL_MD_MASK (7 << 0)
+#define MExxBSIZE 0x404
+#define MExxBSIZE_RCNT_SHIFT 28
+#define MExxBSIZE_YSZM1_SHIFT 16
+#define MExxBSIZE_XSZM1_SHIFT 0
+#define MExxMNCF 0x408
+#define MExxMNCF_KWBNM_SHIFT 28
+#define MExxMNCF_KRBNM_SHIFT 24
+#define MExxMNCF_BNM_SHIFT 16
+#define MExxMNCF_XBV (1 << 15)
+#define MExxMNCF_CPL_YCBCR444 (1 << 12)
+#define MExxMNCF_CPL_YCBCR420 (2 << 12)
+#define MExxMNCF_CPL_YCBCR422 (3 << 12)
+#define MExxMNCF_CPL_MSK (3 << 12)
+#define MExxMNCF_BL (1 << 2)
+#define MExxMNCF_LNM_SHIFT 0
+#define MExxSARA 0x410
+#define MExxSARB 0x414
+#define MExxSBSIZE 0x418
+#define MExxSBSIZE_HDV (1 << 31)
+#define MExxSBSIZE_HSZ16 (0 << 28)
+#define MExxSBSIZE_HSZ32 (1 << 28)
+#define MExxSBSIZE_HSZ64 (2 << 28)
+#define MExxSBSIZE_HSZ128 (3 << 28)
+#define MExxSBSIZE_SBSIZZ_SHIFT 0
-#define MEVCR1 0x4
-#define MEACTS 0x10
-#define MEQSEL1 0x40
-#define MEQSEL2 0x44
+#define MERAM_MExxCTL_VAL(next, addr) \
+ ((((next) << MExxCTL_NXT_SHIFT) & MExxCTL_NXT_MASK) | \
+ (((addr) << MExxCTL_MSAR_SHIFT) & MExxCTL_MSAR_MASK))
+#define MERAM_MExxBSIZE_VAL(rcnt, yszm1, xszm1) \
+ (((rcnt) << MExxBSIZE_RCNT_SHIFT) | \
+ ((yszm1) << MExxBSIZE_YSZM1_SHIFT) | \
+ ((xszm1) << MExxBSIZE_XSZM1_SHIFT))
+
+#define SH_MOBILE_MERAM_ICB_NUM 32
+
+static unsigned long common_regs[] = {
+ MEVCR1,
+ MEQSEL1,
+ MEQSEL2,
+};
+#define CMN_REGS_SIZE ARRAY_SIZE(common_regs)
+
+static unsigned long icb_regs[] = {
+ MExxCTL,
+ MExxBSIZE,
+ MExxMNCF,
+ MExxSARA,
+ MExxSARB,
+ MExxSBSIZE,
+};
+#define ICB_REGS_SIZE ARRAY_SIZE(icb_regs)
+
+struct sh_mobile_meram_priv {
+ void __iomem *base;
+ struct mutex lock;
+ unsigned long used_icb;
+ int used_meram_cache_regions;
+ unsigned long used_meram_cache[SH_MOBILE_MERAM_ICB_NUM];
+ unsigned long cmn_saved_regs[CMN_REGS_SIZE];
+ unsigned long icb_saved_regs[ICB_REGS_SIZE * SH_MOBILE_MERAM_ICB_NUM];
+};
/* settings */
#define MERAM_SEC_LINE 15
@@ -44,8 +118,7 @@
* MERAM/ICB access functions
*/
-#define MERAM_ICB_OFFSET(base, idx, off) \
- ((base) + (0x400 + ((idx) * 0x20) + (off)))
+#define MERAM_ICB_OFFSET(base, idx, off) ((base) + (off) + (idx) * 0x20)
static inline void meram_write_icb(void __iomem *base, int idx, int off,
unsigned long val)
@@ -280,17 +353,18 @@
/*
* Set MERAM for framebuffer
*
- * 0x70f: WD = 0x3, WS=0x1, CM=0x1, MD=FB mode
* we also chain the cache_icb and the marker_icb.
* we also split the allocated MERAM buffer between two ICBs.
*/
meram_write_icb(priv->base, icb->cache_icb, MExxCTL,
- MERAM_MExxCTL_VAL(0x70f, icb->marker_icb,
- icb->meram_offset));
+ MERAM_MExxCTL_VAL(icb->marker_icb, icb->meram_offset) |
+ MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM |
+ MExxCTL_MD_FB);
meram_write_icb(priv->base, icb->marker_icb, MExxCTL,
- MERAM_MExxCTL_VAL(0x70f, icb->cache_icb,
- icb->meram_offset +
- icb->meram_size / 2));
+ MERAM_MExxCTL_VAL(icb->cache_icb, icb->meram_offset +
+ icb->meram_size / 2) |
+ MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM |
+ MExxCTL_MD_FB);
return 0;
}
@@ -299,8 +373,10 @@
struct sh_mobile_meram_icb *icb)
{
/* disable ICB */
- meram_write_icb(priv->base, icb->cache_icb, MExxCTL, 0);
- meram_write_icb(priv->base, icb->marker_icb, MExxCTL, 0);
+ meram_write_icb(priv->base, icb->cache_icb, MExxCTL,
+ MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF);
+ meram_write_icb(priv->base, icb->marker_icb, MExxCTL,
+ MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF);
icb->cache_unit = 0;
}
@@ -337,24 +413,22 @@
xres, yres, (!pixelformat) ? "yuv" : "rgb",
base_addr_y, base_addr_c);
- mutex_lock(&priv->lock);
-
/* we can't handle wider than 8192px */
if (xres > 8192) {
dev_err(&pdev->dev, "width exceeding the limit (> 8192).");
- error = -EINVAL;
- goto err;
- }
-
- if (priv->used_meram_cache_regions + 2 > SH_MOBILE_MERAM_ICB_NUM) {
- dev_err(&pdev->dev, "no more ICB available.");
- error = -EINVAL;
- goto err;
+ return -EINVAL;
}
/* do we have at least one ICB config? */
if (cfg->icb[0].marker_icb < 0 || cfg->icb[0].cache_icb < 0) {
dev_err(&pdev->dev, "at least one ICB is required.");
+ return -EINVAL;
+ }
+
+ mutex_lock(&priv->lock);
+
+ if (priv->used_meram_cache_regions + 2 > SH_MOBILE_MERAM_ICB_NUM) {
+ dev_err(&pdev->dev, "no more ICB available.");
error = -EINVAL;
goto err;
}
@@ -460,6 +534,57 @@
return 0;
}
+static int sh_mobile_meram_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
+ int k, j;
+
+ for (k = 0; k < CMN_REGS_SIZE; k++)
+ priv->cmn_saved_regs[k] = meram_read_reg(priv->base,
+ common_regs[k]);
+
+ for (j = 0; j < 32; j++) {
+ if (!test_bit(j, &priv->used_icb))
+ continue;
+ for (k = 0; k < ICB_REGS_SIZE; k++) {
+ priv->icb_saved_regs[j * ICB_REGS_SIZE + k] =
+ meram_read_icb(priv->base, j, icb_regs[k]);
+ /* Reset ICB on resume */
+ if (icb_regs[k] == MExxCTL)
+ priv->icb_saved_regs[j * ICB_REGS_SIZE + k] |=
+ MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF;
+ }
+ }
+ return 0;
+}
+
+static int sh_mobile_meram_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
+ int k, j;
+
+ for (j = 0; j < 32; j++) {
+ if (!test_bit(j, &priv->used_icb))
+ continue;
+ for (k = 0; k < ICB_REGS_SIZE; k++) {
+ meram_write_icb(priv->base, j, icb_regs[k],
+ priv->icb_saved_regs[j * ICB_REGS_SIZE + k]);
+ }
+ }
+
+ for (k = 0; k < CMN_REGS_SIZE; k++)
+ meram_write_reg(priv->base, common_regs[k],
+ priv->cmn_saved_regs[k]);
+ return 0;
+}
+
+static const struct dev_pm_ops sh_mobile_meram_dev_pm_ops = {
+ .runtime_suspend = sh_mobile_meram_runtime_suspend,
+ .runtime_resume = sh_mobile_meram_runtime_resume,
+};
+
static struct sh_mobile_meram_ops sh_mobile_meram_ops = {
.module = THIS_MODULE,
.meram_register = sh_mobile_meram_register,
@@ -513,7 +638,9 @@
/* initialize ICB addressing mode */
if (pdata->addr_mode == SH_MOBILE_MERAM_MODE1)
- meram_write_reg(priv->base, MEVCR1, 1 << 29);
+ meram_write_reg(priv->base, MEVCR1, MEVCR1_AMD1);
+
+ pm_runtime_enable(&pdev->dev);
dev_info(&pdev->dev, "sh_mobile_meram initialized.");
@@ -530,6 +657,8 @@
{
struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
+ pm_runtime_disable(&pdev->dev);
+
if (priv->base)
iounmap(priv->base);
@@ -544,6 +673,7 @@
.driver = {
.name = "sh_mobile_meram",
.owner = THIS_MODULE,
+ .pm = &sh_mobile_meram_dev_pm_ops,
},
.probe = sh_mobile_meram_probe,
.remove = sh_mobile_meram_remove,
diff --git a/drivers/video/sh_mobile_meram.h b/drivers/video/sh_mobile_meram.h
deleted file mode 100644
index 82c54fb..0000000
--- a/drivers/video/sh_mobile_meram.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef __sh_mobile_meram_h__
-#define __sh_mobile_meram_h__
-
-#include <linux/mutex.h>
-#include <video/sh_mobile_meram.h>
-
-/*
- * MERAM private
- */
-
-#define MERAM_ICB_Y 0x1
-#define MERAM_ICB_C 0x2
-
-/* MERAM cache size */
-#define SH_MOBILE_MERAM_ICB_NUM 32
-
-#define SH_MOBILE_MERAM_CACHE_OFFSET(p) ((p) >> 16)
-#define SH_MOBILE_MERAM_CACHE_SIZE(p) ((p) & 0xffff)
-
-struct sh_mobile_meram_priv {
- void __iomem *base;
- struct mutex lock;
- unsigned long used_icb;
- int used_meram_cache_regions;
- unsigned long used_meram_cache[SH_MOBILE_MERAM_ICB_NUM];
-};
-
-int sh_mobile_meram_alloc_icb(const struct sh_mobile_meram_cfg *cfg,
- int xres,
- int yres,
- unsigned int base_addr,
- int yuv_mode,
- int *marker_icb,
- int *out_pitch);
-
-void sh_mobile_meram_free_icb(int marker_icb);
-
-#define SH_MOBILE_MERAM_START(ind, ab) \
- (0xC0000000 | ((ab & 0x1) << 23) | ((ind & 0x1F) << 24))
-
-#endif /* !__sh_mobile_meram_h__ */
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7525984..078ca21 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1333,19 +1333,14 @@
}
static int
-sisfb_pan_var(struct sis_video_info *ivideo, struct fb_var_screeninfo *var)
+sisfb_pan_var(struct sis_video_info *ivideo, struct fb_info *info,
+ struct fb_var_screeninfo *var)
{
- if(var->xoffset > (var->xres_virtual - var->xres)) {
- return -EINVAL;
- }
- if(var->yoffset > (var->yres_virtual - var->yres)) {
- return -EINVAL;
- }
-
- ivideo->current_base = (var->yoffset * var->xres_virtual) + var->xoffset;
+ ivideo->current_base = var->yoffset * info->var.xres_virtual
+ + var->xoffset;
/* calculate base bpp dep. */
- switch(var->bits_per_pixel) {
+ switch (info->var.bits_per_pixel) {
case 32:
break;
case 16:
@@ -1635,20 +1630,15 @@
struct sis_video_info *ivideo = (struct sis_video_info *)info->par;
int err;
- if(var->xoffset > (var->xres_virtual - var->xres))
+ if (var->vmode & FB_VMODE_YWRAP)
return -EINVAL;
- if(var->yoffset > (var->yres_virtual - var->yres))
+ if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+ var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
- if(var->vmode & FB_VMODE_YWRAP)
- return -EINVAL;
-
- if(var->xoffset + info->var.xres > info->var.xres_virtual ||
- var->yoffset + info->var.yres > info->var.yres_virtual)
- return -EINVAL;
-
- if((err = sisfb_pan_var(ivideo, var)) < 0)
+ err = sisfb_pan_var(ivideo, info, var);
+ if (err < 0)
return err;
info->var.xoffset = var->xoffset;
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index 89158bc..30f7a81 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -989,7 +989,7 @@
*/
int __init xxxfb_setup(char *options)
{
- /* Parse user speficied options (`video=xxxfb:') */
+ /* Parse user specified options (`video=xxxfb:') */
}
#endif /* MODULE */
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 6294dca..a78254c 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -582,7 +582,7 @@
{
struct sm501fb_par *par = info->par;
struct sm501fb_info *fbi = par->info;
- unsigned int bytes_pixel = var->bits_per_pixel / 8;
+ unsigned int bytes_pixel = info->var.bits_per_pixel / 8;
unsigned long reg;
unsigned long xoffs;
@@ -614,10 +614,10 @@
struct sm501fb_info *fbi = par->info;
unsigned long reg;
- reg = var->xoffset | (var->xres_virtual << 16);
+ reg = var->xoffset | (info->var.xres_virtual << 16);
smc501_writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
- reg = var->yoffset | (var->yres_virtual << 16);
+ reg = var->yoffset | (info->var.yres_virtual << 16);
smc501_writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
sm501fb_sync_regs(fbi);
diff --git a/drivers/video/smscufx.c b/drivers/video/smscufx.c
new file mode 100644
index 0000000..aaccffa
--- /dev/null
+++ b/drivers/video/smscufx.c
@@ -0,0 +1,1994 @@
+/*
+ * smscufx.c -- Framebuffer driver for SMSC UFX USB controller
+ *
+ * Copyright (C) 2011 Steve Glendinning <steve.glendinning@smsc.com>
+ * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it>
+ * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com>
+ * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Based on udlfb, with work from Florian Echtler, Henrik Bjerregaard Pedersen,
+ * and others.
+ *
+ * Works well with Bernie Thompson's X DAMAGE patch to xf86-video-fbdev
+ * available from http://git.plugable.com
+ *
+ * Layout is based on skeletonfb by James Simmons and Geert Uytterhoeven,
+ * usb-skeleton by GregKH.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/uaccess.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "edid.h"
+
+#define check_warn(status, fmt, args...) \
+ ({ if (status < 0) pr_warn(fmt, ##args); })
+
+#define check_warn_return(status, fmt, args...) \
+ ({ if (status < 0) { pr_warn(fmt, ##args); return status; } })
+
+#define check_warn_goto_error(status, fmt, args...) \
+ ({ if (status < 0) { pr_warn(fmt, ##args); goto error; } })
+
+#define all_bits_set(x, bits) (((x) & (bits)) == (bits))
+
+#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
+
+/*
+ * TODO: Propose standard fb.h ioctl for reporting damage,
+ * using _IOWR() and one of the existing area structs from fb.h
+ * Consider these ioctls deprecated, but they're still used by the
+ * DisplayLink X server as yet - need both to be modified in tandem
+ * when new ioctl(s) are ready.
+ */
+#define UFX_IOCTL_RETURN_EDID (0xAD)
+#define UFX_IOCTL_REPORT_DAMAGE (0xAA)
+
+/* -BULK_SIZE as per usb-skeleton. Can we get full page and avoid overhead? */
+#define BULK_SIZE (512)
+#define MAX_TRANSFER (PAGE_SIZE*16 - BULK_SIZE)
+#define WRITES_IN_FLIGHT (4)
+
+#define GET_URB_TIMEOUT (HZ)
+#define FREE_URB_TIMEOUT (HZ*2)
+
+#define BPP 2
+
+#define UFX_DEFIO_WRITE_DELAY 5 /* fb_deferred_io.delay in jiffies */
+#define UFX_DEFIO_WRITE_DISABLE (HZ*60) /* "disable" with long delay */
+
+struct dloarea {
+ int x, y;
+ int w, h;
+};
+
+struct urb_node {
+ struct list_head entry;
+ struct ufx_data *dev;
+ struct delayed_work release_urb_work;
+ struct urb *urb;
+};
+
+struct urb_list {
+ struct list_head list;
+ spinlock_t lock;
+ struct semaphore limit_sem;
+ int available;
+ int count;
+ size_t size;
+};
+
+struct ufx_data {
+ struct usb_device *udev;
+ struct device *gdev; /* &udev->dev */
+ struct fb_info *info;
+ struct urb_list urbs;
+ struct kref kref;
+ int fb_count;
+ bool virtualized; /* true when physical usb device not present */
+ struct delayed_work free_framebuffer_work;
+ atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
+ atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
+ u8 *edid; /* null until we read edid from hw or get from sysfs */
+ size_t edid_size;
+ u32 pseudo_palette[256];
+};
+
+static struct fb_fix_screeninfo ufx_fix = {
+ .id = "smscufx",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+static const u32 smscufx_info_flags = FBINFO_DEFAULT | FBINFO_READS_FAST |
+ FBINFO_VIRTFB | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_FILLRECT |
+ FBINFO_HWACCEL_COPYAREA | FBINFO_MISC_ALWAYS_SETPAR;
+
+static struct usb_device_id id_table[] = {
+ {USB_DEVICE(0x0424, 0x9d00),},
+ {USB_DEVICE(0x0424, 0x9d01),},
+ {},
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* module options */
+static int console; /* Optionally allow fbcon to consume first framebuffer */
+static int fb_defio = true; /* Optionally enable fb_defio mmap support */
+
+/* ufx keeps a list of urbs for efficient bulk transfers */
+static void ufx_urb_completion(struct urb *urb);
+static struct urb *ufx_get_urb(struct ufx_data *dev);
+static int ufx_submit_urb(struct ufx_data *dev, struct urb * urb, size_t len);
+static int ufx_alloc_urb_list(struct ufx_data *dev, int count, size_t size);
+static void ufx_free_urb_list(struct ufx_data *dev);
+
+/* reads a control register */
+static int ufx_reg_read(struct ufx_data *dev, u32 index, u32 *data)
+{
+ u32 *buf = kmalloc(4, GFP_KERNEL);
+ int ret;
+
+ BUG_ON(!dev);
+
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+ USB_VENDOR_REQUEST_READ_REGISTER,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
+
+ le32_to_cpus(buf);
+ *data = *buf;
+ kfree(buf);
+
+ if (unlikely(ret < 0))
+ pr_warn("Failed to read register index 0x%08x\n", index);
+
+ return ret;
+}
+
+/* writes a control register */
+static int ufx_reg_write(struct ufx_data *dev, u32 index, u32 data)
+{
+ u32 *buf = kmalloc(4, GFP_KERNEL);
+ int ret;
+
+ BUG_ON(!dev);
+
+ if (!buf)
+ return -ENOMEM;
+
+ *buf = data;
+ cpu_to_le32s(buf);
+
+ ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+ USB_VENDOR_REQUEST_WRITE_REGISTER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
+
+ kfree(buf);
+
+ if (unlikely(ret < 0))
+ pr_warn("Failed to write register index 0x%08x with value "
+ "0x%08x\n", index, data);
+
+ return ret;
+}
+
+static int ufx_reg_clear_and_set_bits(struct ufx_data *dev, u32 index,
+ u32 bits_to_clear, u32 bits_to_set)
+{
+ u32 data;
+ int status = ufx_reg_read(dev, index, &data);
+ check_warn_return(status, "ufx_reg_clear_and_set_bits error reading "
+ "0x%x", index);
+
+ data &= (~bits_to_clear);
+ data |= bits_to_set;
+
+ status = ufx_reg_write(dev, index, data);
+ check_warn_return(status, "ufx_reg_clear_and_set_bits error writing "
+ "0x%x", index);
+
+ return 0;
+}
+
+static int ufx_reg_set_bits(struct ufx_data *dev, u32 index, u32 bits)
+{
+ return ufx_reg_clear_and_set_bits(dev, index, 0, bits);
+}
+
+static int ufx_reg_clear_bits(struct ufx_data *dev, u32 index, u32 bits)
+{
+ return ufx_reg_clear_and_set_bits(dev, index, bits, 0);
+}
+
+static int ufx_lite_reset(struct ufx_data *dev)
+{
+ int status;
+ u32 value;
+
+ status = ufx_reg_write(dev, 0x3008, 0x00000001);
+ check_warn_return(status, "ufx_lite_reset error writing 0x3008");
+
+ status = ufx_reg_read(dev, 0x3008, &value);
+ check_warn_return(status, "ufx_lite_reset error reading 0x3008");
+
+ return (value == 0) ? 0 : -EIO;
+}
+
+/* If display is unblanked, then blank it */
+static int ufx_blank(struct ufx_data *dev, bool wait)
+{
+ u32 dc_ctrl, dc_sts;
+ int i;
+
+ int status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_blank error reading 0x2004");
+
+ status = ufx_reg_read(dev, 0x2000, &dc_ctrl);
+ check_warn_return(status, "ufx_blank error reading 0x2000");
+
+ /* return success if display is already blanked */
+ if ((dc_sts & 0x00000100) || (dc_ctrl & 0x00000100))
+ return 0;
+
+ /* request the DC to blank the display */
+ dc_ctrl |= 0x00000100;
+ status = ufx_reg_write(dev, 0x2000, dc_ctrl);
+ check_warn_return(status, "ufx_blank error writing 0x2000");
+
+ /* return success immediately if we don't have to wait */
+ if (!wait)
+ return 0;
+
+ for (i = 0; i < 250; i++) {
+ status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_blank error reading 0x2004");
+
+ if (dc_sts & 0x00000100)
+ return 0;
+ }
+
+ /* timed out waiting for display to blank */
+ return -EIO;
+}
+
+/* If display is blanked, then unblank it */
+static int ufx_unblank(struct ufx_data *dev, bool wait)
+{
+ u32 dc_ctrl, dc_sts;
+ int i;
+
+ int status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_unblank error reading 0x2004");
+
+ status = ufx_reg_read(dev, 0x2000, &dc_ctrl);
+ check_warn_return(status, "ufx_unblank error reading 0x2000");
+
+ /* return success if display is already unblanked */
+ if (((dc_sts & 0x00000100) == 0) || ((dc_ctrl & 0x00000100) == 0))
+ return 0;
+
+ /* request the DC to unblank the display */
+ dc_ctrl &= ~0x00000100;
+ status = ufx_reg_write(dev, 0x2000, dc_ctrl);
+ check_warn_return(status, "ufx_unblank error writing 0x2000");
+
+ /* return success immediately if we don't have to wait */
+ if (!wait)
+ return 0;
+
+ for (i = 0; i < 250; i++) {
+ status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_unblank error reading 0x2004");
+
+ if ((dc_sts & 0x00000100) == 0)
+ return 0;
+ }
+
+ /* timed out waiting for display to unblank */
+ return -EIO;
+}
+
+/* If display is enabled, then disable it */
+static int ufx_disable(struct ufx_data *dev, bool wait)
+{
+ u32 dc_ctrl, dc_sts;
+ int i;
+
+ int status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_disable error reading 0x2004");
+
+ status = ufx_reg_read(dev, 0x2000, &dc_ctrl);
+ check_warn_return(status, "ufx_disable error reading 0x2000");
+
+ /* return success if display is already disabled */
+ if (((dc_sts & 0x00000001) == 0) || ((dc_ctrl & 0x00000001) == 0))
+ return 0;
+
+ /* request the DC to disable the display */
+ dc_ctrl &= ~(0x00000001);
+ status = ufx_reg_write(dev, 0x2000, dc_ctrl);
+ check_warn_return(status, "ufx_disable error writing 0x2000");
+
+ /* return success immediately if we don't have to wait */
+ if (!wait)
+ return 0;
+
+ for (i = 0; i < 250; i++) {
+ status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_disable error reading 0x2004");
+
+ if ((dc_sts & 0x00000001) == 0)
+ return 0;
+ }
+
+ /* timed out waiting for display to disable */
+ return -EIO;
+}
+
+/* If display is disabled, then enable it */
+static int ufx_enable(struct ufx_data *dev, bool wait)
+{
+ u32 dc_ctrl, dc_sts;
+ int i;
+
+ int status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_enable error reading 0x2004");
+
+ status = ufx_reg_read(dev, 0x2000, &dc_ctrl);
+ check_warn_return(status, "ufx_enable error reading 0x2000");
+
+ /* return success if display is already enabled */
+ if ((dc_sts & 0x00000001) || (dc_ctrl & 0x00000001))
+ return 0;
+
+ /* request the DC to enable the display */
+ dc_ctrl |= 0x00000001;
+ status = ufx_reg_write(dev, 0x2000, dc_ctrl);
+ check_warn_return(status, "ufx_enable error writing 0x2000");
+
+ /* return success immediately if we don't have to wait */
+ if (!wait)
+ return 0;
+
+ for (i = 0; i < 250; i++) {
+ status = ufx_reg_read(dev, 0x2004, &dc_sts);
+ check_warn_return(status, "ufx_enable error reading 0x2004");
+
+ if (dc_sts & 0x00000001)
+ return 0;
+ }
+
+ /* timed out waiting for display to enable */
+ return -EIO;
+}
+
+static int ufx_config_sys_clk(struct ufx_data *dev)
+{
+ int status = ufx_reg_write(dev, 0x700C, 0x8000000F);
+ check_warn_return(status, "error writing 0x700C");
+
+ status = ufx_reg_write(dev, 0x7014, 0x0010024F);
+ check_warn_return(status, "error writing 0x7014");
+
+ status = ufx_reg_write(dev, 0x7010, 0x00000000);
+ check_warn_return(status, "error writing 0x7010");
+
+ status = ufx_reg_clear_bits(dev, 0x700C, 0x0000000A);
+ check_warn_return(status, "error clearing PLL1 bypass in 0x700C");
+ msleep(1);
+
+ status = ufx_reg_clear_bits(dev, 0x700C, 0x80000000);
+ check_warn_return(status, "error clearing output gate in 0x700C");
+
+ return 0;
+}
+
+static int ufx_config_ddr2(struct ufx_data *dev)
+{
+ int status, i = 0;
+ u32 tmp;
+
+ status = ufx_reg_write(dev, 0x0004, 0x001F0F77);
+ check_warn_return(status, "error writing 0x0004");
+
+ status = ufx_reg_write(dev, 0x0008, 0xFFF00000);
+ check_warn_return(status, "error writing 0x0008");
+
+ status = ufx_reg_write(dev, 0x000C, 0x0FFF2222);
+ check_warn_return(status, "error writing 0x000C");
+
+ status = ufx_reg_write(dev, 0x0010, 0x00030814);
+ check_warn_return(status, "error writing 0x0010");
+
+ status = ufx_reg_write(dev, 0x0014, 0x00500019);
+ check_warn_return(status, "error writing 0x0014");
+
+ status = ufx_reg_write(dev, 0x0018, 0x020D0F15);
+ check_warn_return(status, "error writing 0x0018");
+
+ status = ufx_reg_write(dev, 0x001C, 0x02532305);
+ check_warn_return(status, "error writing 0x001C");
+
+ status = ufx_reg_write(dev, 0x0020, 0x0B030905);
+ check_warn_return(status, "error writing 0x0020");
+
+ status = ufx_reg_write(dev, 0x0024, 0x00000827);
+ check_warn_return(status, "error writing 0x0024");
+
+ status = ufx_reg_write(dev, 0x0028, 0x00000000);
+ check_warn_return(status, "error writing 0x0028");
+
+ status = ufx_reg_write(dev, 0x002C, 0x00000042);
+ check_warn_return(status, "error writing 0x002C");
+
+ status = ufx_reg_write(dev, 0x0030, 0x09520000);
+ check_warn_return(status, "error writing 0x0030");
+
+ status = ufx_reg_write(dev, 0x0034, 0x02223314);
+ check_warn_return(status, "error writing 0x0034");
+
+ status = ufx_reg_write(dev, 0x0038, 0x00430043);
+ check_warn_return(status, "error writing 0x0038");
+
+ status = ufx_reg_write(dev, 0x003C, 0xF00F000F);
+ check_warn_return(status, "error writing 0x003C");
+
+ status = ufx_reg_write(dev, 0x0040, 0xF380F00F);
+ check_warn_return(status, "error writing 0x0040");
+
+ status = ufx_reg_write(dev, 0x0044, 0xF00F0496);
+ check_warn_return(status, "error writing 0x0044");
+
+ status = ufx_reg_write(dev, 0x0048, 0x03080406);
+ check_warn_return(status, "error writing 0x0048");
+
+ status = ufx_reg_write(dev, 0x004C, 0x00001000);
+ check_warn_return(status, "error writing 0x004C");
+
+ status = ufx_reg_write(dev, 0x005C, 0x00000007);
+ check_warn_return(status, "error writing 0x005C");
+
+ status = ufx_reg_write(dev, 0x0100, 0x54F00012);
+ check_warn_return(status, "error writing 0x0100");
+
+ status = ufx_reg_write(dev, 0x0104, 0x00004012);
+ check_warn_return(status, "error writing 0x0104");
+
+ status = ufx_reg_write(dev, 0x0118, 0x40404040);
+ check_warn_return(status, "error writing 0x0118");
+
+ status = ufx_reg_write(dev, 0x0000, 0x00000001);
+ check_warn_return(status, "error writing 0x0000");
+
+ while (i++ < 500) {
+ status = ufx_reg_read(dev, 0x0000, &tmp);
+ check_warn_return(status, "error reading 0x0000");
+
+ if (all_bits_set(tmp, 0xC0000000))
+ return 0;
+ }
+
+ pr_err("DDR2 initialisation timed out, reg 0x0000=0x%08x", tmp);
+ return -ETIMEDOUT;
+}
+
+struct pll_values {
+ u32 div_r0;
+ u32 div_f0;
+ u32 div_q0;
+ u32 range0;
+ u32 div_r1;
+ u32 div_f1;
+ u32 div_q1;
+ u32 range1;
+};
+
+static u32 ufx_calc_range(u32 ref_freq)
+{
+ if (ref_freq >= 88000000)
+ return 7;
+
+ if (ref_freq >= 54000000)
+ return 6;
+
+ if (ref_freq >= 34000000)
+ return 5;
+
+ if (ref_freq >= 21000000)
+ return 4;
+
+ if (ref_freq >= 13000000)
+ return 3;
+
+ if (ref_freq >= 8000000)
+ return 2;
+
+ return 1;
+}
+
+/* calculates PLL divider settings for a desired target frequency */
+static void ufx_calc_pll_values(const u32 clk_pixel_pll, struct pll_values *asic_pll)
+{
+ const u32 ref_clk = 25000000;
+ u32 div_r0, div_f0, div_q0, div_r1, div_f1, div_q1;
+ u32 min_error = clk_pixel_pll;
+
+ for (div_r0 = 1; div_r0 <= 32; div_r0++) {
+ u32 ref_freq0 = ref_clk / div_r0;
+ if (ref_freq0 < 5000000)
+ break;
+
+ if (ref_freq0 > 200000000)
+ continue;
+
+ for (div_f0 = 1; div_f0 <= 256; div_f0++) {
+ u32 vco_freq0 = ref_freq0 * div_f0;
+
+ if (vco_freq0 < 350000000)
+ continue;
+
+ if (vco_freq0 > 700000000)
+ break;
+
+ for (div_q0 = 0; div_q0 < 7; div_q0++) {
+ u32 pllout_freq0 = vco_freq0 / (1 << div_q0);
+
+ if (pllout_freq0 < 5000000)
+ break;
+
+ if (pllout_freq0 > 200000000)
+ continue;
+
+ for (div_r1 = 1; div_r1 <= 32; div_r1++) {
+ u32 ref_freq1 = pllout_freq0 / div_r1;
+
+ if (ref_freq1 < 5000000)
+ break;
+
+ for (div_f1 = 1; div_f1 <= 256; div_f1++) {
+ u32 vco_freq1 = ref_freq1 * div_f1;
+
+ if (vco_freq1 < 350000000)
+ continue;
+
+ if (vco_freq1 > 700000000)
+ break;
+
+ for (div_q1 = 0; div_q1 < 7; div_q1++) {
+ u32 pllout_freq1 = vco_freq1 / (1 << div_q1);
+ int error = abs(pllout_freq1 - clk_pixel_pll);
+
+ if (pllout_freq1 < 5000000)
+ break;
+
+ if (pllout_freq1 > 700000000)
+ continue;
+
+ if (error < min_error) {
+ min_error = error;
+
+ /* final returned value is equal to calculated value - 1
+ * because a value of 0 = divide by 1 */
+ asic_pll->div_r0 = div_r0 - 1;
+ asic_pll->div_f0 = div_f0 - 1;
+ asic_pll->div_q0 = div_q0;
+ asic_pll->div_r1 = div_r1 - 1;
+ asic_pll->div_f1 = div_f1 - 1;
+ asic_pll->div_q1 = div_q1;
+
+ asic_pll->range0 = ufx_calc_range(ref_freq0);
+ asic_pll->range1 = ufx_calc_range(ref_freq1);
+
+ if (min_error == 0)
+ return;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+/* sets analog bit PLL configuration values */
+static int ufx_config_pix_clk(struct ufx_data *dev, u32 pixclock)
+{
+ struct pll_values asic_pll = {0};
+ u32 value, clk_pixel, clk_pixel_pll;
+ int status;
+
+ /* convert pixclock (in ps) to frequency (in Hz) */
+ clk_pixel = PICOS2KHZ(pixclock) * 1000;
+ pr_debug("pixclock %d ps = clk_pixel %d Hz", pixclock, clk_pixel);
+
+ /* clk_pixel = 1/2 clk_pixel_pll */
+ clk_pixel_pll = clk_pixel * 2;
+
+ ufx_calc_pll_values(clk_pixel_pll, &asic_pll);
+
+ /* Keep BYPASS and RESET signals asserted until configured */
+ status = ufx_reg_write(dev, 0x7000, 0x8000000F);
+ check_warn_return(status, "error writing 0x7000");
+
+ value = (asic_pll.div_f1 | (asic_pll.div_r1 << 8) |
+ (asic_pll.div_q1 << 16) | (asic_pll.range1 << 20));
+ status = ufx_reg_write(dev, 0x7008, value);
+ check_warn_return(status, "error writing 0x7008");
+
+ value = (asic_pll.div_f0 | (asic_pll.div_r0 << 8) |
+ (asic_pll.div_q0 << 16) | (asic_pll.range0 << 20));
+ status = ufx_reg_write(dev, 0x7004, value);
+ check_warn_return(status, "error writing 0x7004");
+
+ status = ufx_reg_clear_bits(dev, 0x7000, 0x00000005);
+ check_warn_return(status,
+ "error clearing PLL0 bypass bits in 0x7000");
+ msleep(1);
+
+ status = ufx_reg_clear_bits(dev, 0x7000, 0x0000000A);
+ check_warn_return(status,
+ "error clearing PLL1 bypass bits in 0x7000");
+ msleep(1);
+
+ status = ufx_reg_clear_bits(dev, 0x7000, 0x80000000);
+ check_warn_return(status, "error clearing gate bits in 0x7000");
+
+ return 0;
+}
+
+static int ufx_set_vid_mode(struct ufx_data *dev, struct fb_var_screeninfo *var)
+{
+ u32 temp;
+ u16 h_total, h_active, h_blank_start, h_blank_end, h_sync_start, h_sync_end;
+ u16 v_total, v_active, v_blank_start, v_blank_end, v_sync_start, v_sync_end;
+
+ int status = ufx_reg_write(dev, 0x8028, 0);
+ check_warn_return(status, "ufx_set_vid_mode error disabling RGB pad");
+
+ status = ufx_reg_write(dev, 0x8024, 0);
+ check_warn_return(status, "ufx_set_vid_mode error disabling VDAC");
+
+ /* shut everything down before changing timing */
+ status = ufx_blank(dev, true);
+ check_warn_return(status, "ufx_set_vid_mode error blanking display");
+
+ status = ufx_disable(dev, true);
+ check_warn_return(status, "ufx_set_vid_mode error disabling display");
+
+ status = ufx_config_pix_clk(dev, var->pixclock);
+ check_warn_return(status, "ufx_set_vid_mode error configuring pixclock");
+
+ status = ufx_reg_write(dev, 0x2000, 0x00000104);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2000");
+
+ /* set horizontal timings */
+ h_total = var->xres + var->right_margin + var->hsync_len + var->left_margin;
+ h_active = var->xres;
+ h_blank_start = var->xres + var->right_margin;
+ h_blank_end = var->xres + var->right_margin + var->hsync_len;
+ h_sync_start = var->xres + var->right_margin;
+ h_sync_end = var->xres + var->right_margin + var->hsync_len;
+
+ temp = ((h_total - 1) << 16) | (h_active - 1);
+ status = ufx_reg_write(dev, 0x2008, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2008");
+
+ temp = ((h_blank_start - 1) << 16) | (h_blank_end - 1);
+ status = ufx_reg_write(dev, 0x200C, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x200C");
+
+ temp = ((h_sync_start - 1) << 16) | (h_sync_end - 1);
+ status = ufx_reg_write(dev, 0x2010, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2010");
+
+ /* set vertical timings */
+ v_total = var->upper_margin + var->yres + var->lower_margin + var->vsync_len;
+ v_active = var->yres;
+ v_blank_start = var->yres + var->lower_margin;
+ v_blank_end = var->yres + var->lower_margin + var->vsync_len;
+ v_sync_start = var->yres + var->lower_margin;
+ v_sync_end = var->yres + var->lower_margin + var->vsync_len;
+
+ temp = ((v_total - 1) << 16) | (v_active - 1);
+ status = ufx_reg_write(dev, 0x2014, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2014");
+
+ temp = ((v_blank_start - 1) << 16) | (v_blank_end - 1);
+ status = ufx_reg_write(dev, 0x2018, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2018");
+
+ temp = ((v_sync_start - 1) << 16) | (v_sync_end - 1);
+ status = ufx_reg_write(dev, 0x201C, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x201C");
+
+ status = ufx_reg_write(dev, 0x2020, 0x00000000);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2020");
+
+ status = ufx_reg_write(dev, 0x2024, 0x00000000);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2024");
+
+ /* Set the frame length register (#pix * 2 bytes/pixel) */
+ temp = var->xres * var->yres * 2;
+ temp = (temp + 7) & (~0x7);
+ status = ufx_reg_write(dev, 0x2028, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2028");
+
+ /* enable desired output interface & disable others */
+ status = ufx_reg_write(dev, 0x2040, 0);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2040");
+
+ status = ufx_reg_write(dev, 0x2044, 0);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2044");
+
+ status = ufx_reg_write(dev, 0x2048, 0);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2048");
+
+ /* set the sync polarities & enable bit */
+ temp = 0x00000001;
+ if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+ temp |= 0x00000010;
+
+ if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+ temp |= 0x00000008;
+
+ status = ufx_reg_write(dev, 0x2040, temp);
+ check_warn_return(status, "ufx_set_vid_mode error writing 0x2040");
+
+ /* start everything back up */
+ status = ufx_enable(dev, true);
+ check_warn_return(status, "ufx_set_vid_mode error enabling display");
+
+ /* Unblank the display */
+ status = ufx_unblank(dev, true);
+ check_warn_return(status, "ufx_set_vid_mode error unblanking display");
+
+ /* enable RGB pad */
+ status = ufx_reg_write(dev, 0x8028, 0x00000003);
+ check_warn_return(status, "ufx_set_vid_mode error enabling RGB pad");
+
+ /* enable VDAC */
+ status = ufx_reg_write(dev, 0x8024, 0x00000007);
+ check_warn_return(status, "ufx_set_vid_mode error enabling VDAC");
+
+ return 0;
+}
+
+static int ufx_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ unsigned long start = vma->vm_start;
+ unsigned long size = vma->vm_end - vma->vm_start;
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ unsigned long page, pos;
+
+ if (offset + size > info->fix.smem_len)
+ return -EINVAL;
+
+ pos = (unsigned long)info->fix.smem_start + offset;
+
+ pr_debug("mmap() framebuffer addr:%lu size:%lu\n",
+ pos, size);
+
+ while (size > 0) {
+ page = vmalloc_to_pfn((void *)pos);
+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+ return -EAGAIN;
+
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ if (size > PAGE_SIZE)
+ size -= PAGE_SIZE;
+ else
+ size = 0;
+ }
+
+ vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */
+ return 0;
+}
+
+static void ufx_raw_rect(struct ufx_data *dev, u16 *cmd, int x, int y,
+ int width, int height)
+{
+ size_t packed_line_len = ALIGN((width * 2), 4);
+ size_t packed_rect_len = packed_line_len * height;
+ int line;
+
+ BUG_ON(!dev);
+ BUG_ON(!dev->info);
+
+ /* command word */
+ *((u32 *)&cmd[0]) = cpu_to_le32(0x01);
+
+ /* length word */
+ *((u32 *)&cmd[2]) = cpu_to_le32(packed_rect_len + 16);
+
+ cmd[4] = cpu_to_le16(x);
+ cmd[5] = cpu_to_le16(y);
+ cmd[6] = cpu_to_le16(width);
+ cmd[7] = cpu_to_le16(height);
+
+ /* frame base address */
+ *((u32 *)&cmd[8]) = cpu_to_le32(0);
+
+ /* color mode and horizontal resolution */
+ cmd[10] = cpu_to_le16(0x4000 | dev->info->var.xres);
+
+ /* vertical resolution */
+ cmd[11] = cpu_to_le16(dev->info->var.yres);
+
+ /* packed data */
+ for (line = 0; line < height; line++) {
+ const int line_offset = dev->info->fix.line_length * (y + line);
+ const int byte_offset = line_offset + (x * BPP);
+ memcpy(&cmd[(24 + (packed_line_len * line)) / 2],
+ (char *)dev->info->fix.smem_start + byte_offset, width * BPP);
+ }
+}
+
+int ufx_handle_damage(struct ufx_data *dev, int x, int y,
+ int width, int height)
+{
+ size_t packed_line_len = ALIGN((width * 2), 4);
+ int len, status, urb_lines, start_line = 0;
+
+ if ((width <= 0) || (height <= 0) ||
+ (x + width > dev->info->var.xres) ||
+ (y + height > dev->info->var.yres))
+ return -EINVAL;
+
+ if (!atomic_read(&dev->usb_active))
+ return 0;
+
+ while (start_line < height) {
+ struct urb *urb = ufx_get_urb(dev);
+ if (!urb) {
+ pr_warn("ufx_handle_damage unable to get urb");
+ return 0;
+ }
+
+ /* assume we have enough space to transfer at least one line */
+ BUG_ON(urb->transfer_buffer_length < (24 + (width * 2)));
+
+ /* calculate the maximum number of lines we could fit in */
+ urb_lines = (urb->transfer_buffer_length - 24) / packed_line_len;
+
+ /* but we might not need this many */
+ urb_lines = min(urb_lines, (height - start_line));
+
+ memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
+
+ ufx_raw_rect(dev, urb->transfer_buffer, x, (y + start_line), width, urb_lines);
+ len = 24 + (packed_line_len * urb_lines);
+
+ status = ufx_submit_urb(dev, urb, len);
+ check_warn_return(status, "Error submitting URB");
+
+ start_line += urb_lines;
+ }
+
+ return 0;
+}
+
+/* Path triggered by usermode clients who write to filesystem
+ * e.g. cat filename > /dev/fb1
+ * Not used by X Windows or text-mode console. But useful for testing.
+ * Slow because of extra copy and we must assume all pixels dirty. */
+static ssize_t ufx_ops_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t result;
+ struct ufx_data *dev = info->par;
+ u32 offset = (u32) *ppos;
+
+ result = fb_sys_write(info, buf, count, ppos);
+
+ if (result > 0) {
+ int start = max((int)(offset / info->fix.line_length) - 1, 0);
+ int lines = min((u32)((result / info->fix.line_length) + 1),
+ (u32)info->var.yres);
+
+ ufx_handle_damage(dev, 0, start, info->var.xres, lines);
+ }
+
+ return result;
+}
+
+static void ufx_ops_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+
+ struct ufx_data *dev = info->par;
+
+ sys_copyarea(info, area);
+
+ ufx_handle_damage(dev, area->dx, area->dy,
+ area->width, area->height);
+}
+
+static void ufx_ops_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct ufx_data *dev = info->par;
+
+ sys_imageblit(info, image);
+
+ ufx_handle_damage(dev, image->dx, image->dy,
+ image->width, image->height);
+}
+
+static void ufx_ops_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct ufx_data *dev = info->par;
+
+ sys_fillrect(info, rect);
+
+ ufx_handle_damage(dev, rect->dx, rect->dy, rect->width,
+ rect->height);
+}
+
+/* NOTE: fb_defio.c is holding info->fbdefio.mutex
+ * Touching ANY framebuffer memory that triggers a page fault
+ * in fb_defio will cause a deadlock, when it also tries to
+ * grab the same mutex. */
+static void ufx_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ struct page *cur;
+ struct fb_deferred_io *fbdefio = info->fbdefio;
+ struct ufx_data *dev = info->par;
+
+ if (!fb_defio)
+ return;
+
+ if (!atomic_read(&dev->usb_active))
+ return;
+
+ /* walk the written page list and render each to device */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ /* create a rectangle of full screen width that encloses the
+ * entire dirty framebuffer page */
+ const int x = 0;
+ const int width = dev->info->var.xres;
+ const int y = (cur->index << PAGE_SHIFT) / (width * 2);
+ int height = (PAGE_SIZE / (width * 2)) + 1;
+ height = min(height, (int)(dev->info->var.yres - y));
+
+ BUG_ON(y >= dev->info->var.yres);
+ BUG_ON((y + height) > dev->info->var.yres);
+
+ ufx_handle_damage(dev, x, y, width, height);
+ }
+}
+
+static int ufx_ops_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct ufx_data *dev = info->par;
+ struct dloarea *area = NULL;
+
+ if (!atomic_read(&dev->usb_active))
+ return 0;
+
+ /* TODO: Update X server to get this from sysfs instead */
+ if (cmd == UFX_IOCTL_RETURN_EDID) {
+ u8 __user *edid = (u8 __user *)arg;
+ if (copy_to_user(edid, dev->edid, dev->edid_size))
+ return -EFAULT;
+ return 0;
+ }
+
+ /* TODO: Help propose a standard fb.h ioctl to report mmap damage */
+ if (cmd == UFX_IOCTL_REPORT_DAMAGE) {
+ /* If we have a damage-aware client, turn fb_defio "off"
+ * To avoid perf imact of unecessary page fault handling.
+ * Done by resetting the delay for this fb_info to a very
+ * long period. Pages will become writable and stay that way.
+ * Reset to normal value when all clients have closed this fb.
+ */
+ if (info->fbdefio)
+ info->fbdefio->delay = UFX_DEFIO_WRITE_DISABLE;
+
+ area = (struct dloarea *)arg;
+
+ if (area->x < 0)
+ area->x = 0;
+
+ if (area->x > info->var.xres)
+ area->x = info->var.xres;
+
+ if (area->y < 0)
+ area->y = 0;
+
+ if (area->y > info->var.yres)
+ area->y = info->var.yres;
+
+ ufx_handle_damage(dev, area->x, area->y, area->w, area->h);
+ }
+
+ return 0;
+}
+
+/* taken from vesafb */
+static int
+ufx_ops_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp, struct fb_info *info)
+{
+ int err = 0;
+
+ if (regno >= info->cmap.len)
+ return 1;
+
+ if (regno < 16) {
+ if (info->var.red.offset == 10) {
+ /* 1:5:5:5 */
+ ((u32 *) (info->pseudo_palette))[regno] =
+ ((red & 0xf800) >> 1) |
+ ((green & 0xf800) >> 6) | ((blue & 0xf800) >> 11);
+ } else {
+ /* 0:5:6:5 */
+ ((u32 *) (info->pseudo_palette))[regno] =
+ ((red & 0xf800)) |
+ ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
+ }
+ }
+
+ return err;
+}
+
+/* It's common for several clients to have framebuffer open simultaneously.
+ * e.g. both fbcon and X. Makes things interesting.
+ * Assumes caller is holding info->lock (for open and release at least) */
+static int ufx_ops_open(struct fb_info *info, int user)
+{
+ struct ufx_data *dev = info->par;
+
+ /* fbcon aggressively connects to first framebuffer it finds,
+ * preventing other clients (X) from working properly. Usually
+ * not what the user wants. Fail by default with option to enable. */
+ if (user == 0 && !console)
+ return -EBUSY;
+
+ /* If the USB device is gone, we don't accept new opens */
+ if (dev->virtualized)
+ return -ENODEV;
+
+ dev->fb_count++;
+
+ kref_get(&dev->kref);
+
+ if (fb_defio && (info->fbdefio == NULL)) {
+ /* enable defio at last moment if not disabled by client */
+
+ struct fb_deferred_io *fbdefio;
+
+ fbdefio = kmalloc(sizeof(struct fb_deferred_io), GFP_KERNEL);
+
+ if (fbdefio) {
+ fbdefio->delay = UFX_DEFIO_WRITE_DELAY;
+ fbdefio->deferred_io = ufx_dpy_deferred_io;
+ }
+
+ info->fbdefio = fbdefio;
+ fb_deferred_io_init(info);
+ }
+
+ pr_debug("open /dev/fb%d user=%d fb_info=%p count=%d",
+ info->node, user, info, dev->fb_count);
+
+ return 0;
+}
+
+/*
+ * Called when all client interfaces to start transactions have been disabled,
+ * and all references to our device instance (ufx_data) are released.
+ * Every transaction must have a reference, so we know are fully spun down
+ */
+static void ufx_free(struct kref *kref)
+{
+ struct ufx_data *dev = container_of(kref, struct ufx_data, kref);
+
+ /* this function will wait for all in-flight urbs to complete */
+ if (dev->urbs.count > 0)
+ ufx_free_urb_list(dev);
+
+ pr_debug("freeing ufx_data %p", dev);
+
+ kfree(dev);
+}
+
+static void ufx_release_urb_work(struct work_struct *work)
+{
+ struct urb_node *unode = container_of(work, struct urb_node,
+ release_urb_work.work);
+
+ up(&unode->dev->urbs.limit_sem);
+}
+
+static void ufx_free_framebuffer_work(struct work_struct *work)
+{
+ struct ufx_data *dev = container_of(work, struct ufx_data,
+ free_framebuffer_work.work);
+ struct fb_info *info = dev->info;
+ int node = info->node;
+
+ unregister_framebuffer(info);
+
+ if (info->cmap.len != 0)
+ fb_dealloc_cmap(&info->cmap);
+ if (info->monspecs.modedb)
+ fb_destroy_modedb(info->monspecs.modedb);
+ if (info->screen_base)
+ vfree(info->screen_base);
+
+ fb_destroy_modelist(&info->modelist);
+
+ dev->info = 0;
+
+ /* Assume info structure is freed after this point */
+ framebuffer_release(info);
+
+ pr_debug("fb_info for /dev/fb%d has been freed", node);
+
+ /* ref taken in probe() as part of registering framebfufer */
+ kref_put(&dev->kref, ufx_free);
+}
+
+/*
+ * Assumes caller is holding info->lock mutex (for open and release at least)
+ */
+static int ufx_ops_release(struct fb_info *info, int user)
+{
+ struct ufx_data *dev = info->par;
+
+ dev->fb_count--;
+
+ /* We can't free fb_info here - fbmem will touch it when we return */
+ if (dev->virtualized && (dev->fb_count == 0))
+ schedule_delayed_work(&dev->free_framebuffer_work, HZ);
+
+ if ((dev->fb_count == 0) && (info->fbdefio)) {
+ fb_deferred_io_cleanup(info);
+ kfree(info->fbdefio);
+ info->fbdefio = NULL;
+ info->fbops->fb_mmap = ufx_ops_mmap;
+ }
+
+ pr_debug("released /dev/fb%d user=%d count=%d",
+ info->node, user, dev->fb_count);
+
+ kref_put(&dev->kref, ufx_free);
+
+ return 0;
+}
+
+/* Check whether a video mode is supported by the chip
+ * We start from monitor's modes, so don't need to filter that here */
+static int ufx_is_valid_mode(struct fb_videomode *mode,
+ struct fb_info *info)
+{
+ if ((mode->xres * mode->yres) > (2048 * 1152)) {
+ pr_debug("%dx%d too many pixels",
+ mode->xres, mode->yres);
+ return 0;
+ }
+
+ if (mode->pixclock < 5000) {
+ pr_debug("%dx%d %dps pixel clock too fast",
+ mode->xres, mode->yres, mode->pixclock);
+ return 0;
+ }
+
+ pr_debug("%dx%d (pixclk %dps %dMHz) valid mode", mode->xres, mode->yres,
+ mode->pixclock, (1000000 / mode->pixclock));
+ return 1;
+}
+
+static void ufx_var_color_format(struct fb_var_screeninfo *var)
+{
+ const struct fb_bitfield red = { 11, 5, 0 };
+ const struct fb_bitfield green = { 5, 6, 0 };
+ const struct fb_bitfield blue = { 0, 5, 0 };
+
+ var->bits_per_pixel = 16;
+ var->red = red;
+ var->green = green;
+ var->blue = blue;
+}
+
+static int ufx_ops_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct fb_videomode mode;
+
+ /* TODO: support dynamically changing framebuffer size */
+ if ((var->xres * var->yres * 2) > info->fix.smem_len)
+ return -EINVAL;
+
+ /* set device-specific elements of var unrelated to mode */
+ ufx_var_color_format(var);
+
+ fb_var_to_videomode(&mode, var);
+
+ if (!ufx_is_valid_mode(&mode, info))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ufx_ops_set_par(struct fb_info *info)
+{
+ struct ufx_data *dev = info->par;
+ int result;
+ u16 *pix_framebuffer;
+ int i;
+
+ pr_debug("set_par mode %dx%d", info->var.xres, info->var.yres);
+ result = ufx_set_vid_mode(dev, &info->var);
+
+ if ((result == 0) && (dev->fb_count == 0)) {
+ /* paint greenscreen */
+ pix_framebuffer = (u16 *) info->screen_base;
+ for (i = 0; i < info->fix.smem_len / 2; i++)
+ pix_framebuffer[i] = 0x37e6;
+
+ ufx_handle_damage(dev, 0, 0, info->var.xres, info->var.yres);
+ }
+
+ /* re-enable defio if previously disabled by damage tracking */
+ if (info->fbdefio)
+ info->fbdefio->delay = UFX_DEFIO_WRITE_DELAY;
+
+ return result;
+}
+
+/* In order to come back from full DPMS off, we need to set the mode again */
+static int ufx_ops_blank(int blank_mode, struct fb_info *info)
+{
+ struct ufx_data *dev = info->par;
+ ufx_set_vid_mode(dev, &info->var);
+ return 0;
+}
+
+static struct fb_ops ufx_ops = {
+ .owner = THIS_MODULE,
+ .fb_read = fb_sys_read,
+ .fb_write = ufx_ops_write,
+ .fb_setcolreg = ufx_ops_setcolreg,
+ .fb_fillrect = ufx_ops_fillrect,
+ .fb_copyarea = ufx_ops_copyarea,
+ .fb_imageblit = ufx_ops_imageblit,
+ .fb_mmap = ufx_ops_mmap,
+ .fb_ioctl = ufx_ops_ioctl,
+ .fb_open = ufx_ops_open,
+ .fb_release = ufx_ops_release,
+ .fb_blank = ufx_ops_blank,
+ .fb_check_var = ufx_ops_check_var,
+ .fb_set_par = ufx_ops_set_par,
+};
+
+/* Assumes &info->lock held by caller
+ * Assumes no active clients have framebuffer open */
+static int ufx_realloc_framebuffer(struct ufx_data *dev, struct fb_info *info)
+{
+ int retval = -ENOMEM;
+ int old_len = info->fix.smem_len;
+ int new_len;
+ unsigned char *old_fb = info->screen_base;
+ unsigned char *new_fb;
+
+ pr_debug("Reallocating framebuffer. Addresses will change!");
+
+ new_len = info->fix.line_length * info->var.yres;
+
+ if (PAGE_ALIGN(new_len) > old_len) {
+ /*
+ * Alloc system memory for virtual framebuffer
+ */
+ new_fb = vmalloc(new_len);
+ if (!new_fb) {
+ pr_err("Virtual framebuffer alloc failed");
+ goto error;
+ }
+
+ if (info->screen_base) {
+ memcpy(new_fb, old_fb, old_len);
+ vfree(info->screen_base);
+ }
+
+ info->screen_base = new_fb;
+ info->fix.smem_len = PAGE_ALIGN(new_len);
+ info->fix.smem_start = (unsigned long) new_fb;
+ info->flags = smscufx_info_flags;
+ }
+
+ retval = 0;
+
+error:
+ return retval;
+}
+
+/* sets up I2C Controller for 100 Kbps, std. speed, 7-bit addr, master,
+ * restart enabled, but no start byte, enable controller */
+static int ufx_i2c_init(struct ufx_data *dev)
+{
+ u32 tmp;
+
+ /* disable the controller before it can be reprogrammed */
+ int status = ufx_reg_write(dev, 0x106C, 0x00);
+ check_warn_return(status, "failed to disable I2C");
+
+ /* Setup the clock count registers
+ * (12+1) = 13 clks @ 2.5 MHz = 5.2 uS */
+ status = ufx_reg_write(dev, 0x1018, 12);
+ check_warn_return(status, "error writing 0x1018");
+
+ /* (6+8) = 14 clks @ 2.5 MHz = 5.6 uS */
+ status = ufx_reg_write(dev, 0x1014, 6);
+ check_warn_return(status, "error writing 0x1014");
+
+ status = ufx_reg_read(dev, 0x1000, &tmp);
+ check_warn_return(status, "error reading 0x1000");
+
+ /* set speed to std mode */
+ tmp &= ~(0x06);
+ tmp |= 0x02;
+
+ /* 7-bit (not 10-bit) addressing */
+ tmp &= ~(0x10);
+
+ /* enable restart conditions and master mode */
+ tmp |= 0x21;
+
+ status = ufx_reg_write(dev, 0x1000, tmp);
+ check_warn_return(status, "error writing 0x1000");
+
+ /* Set normal tx using target address 0 */
+ status = ufx_reg_clear_and_set_bits(dev, 0x1004, 0xC00, 0x000);
+ check_warn_return(status, "error setting TX mode bits in 0x1004");
+
+ /* Enable the controller */
+ status = ufx_reg_write(dev, 0x106C, 0x01);
+ check_warn_return(status, "failed to enable I2C");
+
+ return 0;
+}
+
+/* sets the I2C port mux and target address */
+static int ufx_i2c_configure(struct ufx_data *dev)
+{
+ int status = ufx_reg_write(dev, 0x106C, 0x00);
+ check_warn_return(status, "failed to disable I2C");
+
+ status = ufx_reg_write(dev, 0x3010, 0x00000000);
+ check_warn_return(status, "failed to write 0x3010");
+
+ /* A0h is std for any EDID, right shifted by one */
+ status = ufx_reg_clear_and_set_bits(dev, 0x1004, 0x3FF, (0xA0 >> 1));
+ check_warn_return(status, "failed to set TAR bits in 0x1004");
+
+ status = ufx_reg_write(dev, 0x106C, 0x01);
+ check_warn_return(status, "failed to enable I2C");
+
+ return 0;
+}
+
+/* wait for BUSY to clear, with a timeout of 50ms with 10ms sleeps. if no
+ * monitor is connected, there is no error except for timeout */
+static int ufx_i2c_wait_busy(struct ufx_data *dev)
+{
+ u32 tmp;
+ int i, status;
+
+ for (i = 0; i < 15; i++) {
+ status = ufx_reg_read(dev, 0x1100, &tmp);
+ check_warn_return(status, "0x1100 read failed");
+
+ /* if BUSY is clear, check for error */
+ if ((tmp & 0x80000000) == 0) {
+ if (tmp & 0x20000000) {
+ pr_warn("I2C read failed, 0x1100=0x%08x", tmp);
+ return -EIO;
+ }
+
+ return 0;
+ }
+
+ /* perform the first 10 retries without delay */
+ if (i >= 10)
+ msleep(10);
+ }
+
+ pr_warn("I2C access timed out, resetting I2C hardware");
+ status = ufx_reg_write(dev, 0x1100, 0x40000000);
+ check_warn_return(status, "0x1100 write failed");
+
+ return -ETIMEDOUT;
+}
+
+/* reads a 128-byte EDID block from the currently selected port and TAR */
+static int ufx_read_edid(struct ufx_data *dev, u8 *edid, int edid_len)
+{
+ int i, j, status;
+ u32 *edid_u32 = (u32 *)edid;
+
+ BUG_ON(edid_len != EDID_LENGTH);
+
+ status = ufx_i2c_configure(dev);
+ if (status < 0) {
+ pr_err("ufx_i2c_configure failed");
+ return status;
+ }
+
+ memset(edid, 0xff, EDID_LENGTH);
+
+ /* Read the 128-byte EDID as 2 bursts of 64 bytes */
+ for (i = 0; i < 2; i++) {
+ u32 temp = 0x28070000 | (63 << 20) | (((u32)(i * 64)) << 8);
+ status = ufx_reg_write(dev, 0x1100, temp);
+ check_warn_return(status, "Failed to write 0x1100");
+
+ temp |= 0x80000000;
+ status = ufx_reg_write(dev, 0x1100, temp);
+ check_warn_return(status, "Failed to write 0x1100");
+
+ status = ufx_i2c_wait_busy(dev);
+ check_warn_return(status, "Timeout waiting for I2C BUSY to clear");
+
+ for (j = 0; j < 16; j++) {
+ u32 data_reg_addr = 0x1110 + (j * 4);
+ status = ufx_reg_read(dev, data_reg_addr, edid_u32++);
+ check_warn_return(status, "Error reading i2c data");
+ }
+ }
+
+ /* all FF's in the first 16 bytes indicates nothing is connected */
+ for (i = 0; i < 16; i++) {
+ if (edid[i] != 0xFF) {
+ pr_debug("edid data read succesfully");
+ return EDID_LENGTH;
+ }
+ }
+
+ pr_warn("edid data contains all 0xff");
+ return -ETIMEDOUT;
+}
+
+/* 1) use sw default
+ * 2) Parse into various fb_info structs
+ * 3) Allocate virtual framebuffer memory to back highest res mode
+ *
+ * Parses EDID into three places used by various parts of fbdev:
+ * fb_var_screeninfo contains the timing of the monitor's preferred mode
+ * fb_info.monspecs is full parsed EDID info, including monspecs.modedb
+ * fb_info.modelist is a linked list of all monitor & VESA modes which work
+ *
+ * If EDID is not readable/valid, then modelist is all VESA modes,
+ * monspecs is NULL, and fb_var_screeninfo is set to safe VESA mode
+ * Returns 0 if successful */
+static int ufx_setup_modes(struct ufx_data *dev, struct fb_info *info,
+ char *default_edid, size_t default_edid_size)
+{
+ const struct fb_videomode *default_vmode = NULL;
+ u8 *edid;
+ int i, result = 0, tries = 3;
+
+ if (info->dev) /* only use mutex if info has been registered */
+ mutex_lock(&info->lock);
+
+ edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ if (!edid) {
+ result = -ENOMEM;
+ goto error;
+ }
+
+ fb_destroy_modelist(&info->modelist);
+ memset(&info->monspecs, 0, sizeof(info->monspecs));
+
+ /* Try to (re)read EDID from hardware first
+ * EDID data may return, but not parse as valid
+ * Try again a few times, in case of e.g. analog cable noise */
+ while (tries--) {
+ i = ufx_read_edid(dev, edid, EDID_LENGTH);
+
+ if (i >= EDID_LENGTH)
+ fb_edid_to_monspecs(edid, &info->monspecs);
+
+ if (info->monspecs.modedb_len > 0) {
+ dev->edid = edid;
+ dev->edid_size = i;
+ break;
+ }
+ }
+
+ /* If that fails, use a previously returned EDID if available */
+ if (info->monspecs.modedb_len == 0) {
+ pr_err("Unable to get valid EDID from device/display\n");
+
+ if (dev->edid) {
+ fb_edid_to_monspecs(dev->edid, &info->monspecs);
+ if (info->monspecs.modedb_len > 0)
+ pr_err("Using previously queried EDID\n");
+ }
+ }
+
+ /* If that fails, use the default EDID we were handed */
+ if (info->monspecs.modedb_len == 0) {
+ if (default_edid_size >= EDID_LENGTH) {
+ fb_edid_to_monspecs(default_edid, &info->monspecs);
+ if (info->monspecs.modedb_len > 0) {
+ memcpy(edid, default_edid, default_edid_size);
+ dev->edid = edid;
+ dev->edid_size = default_edid_size;
+ pr_err("Using default/backup EDID\n");
+ }
+ }
+ }
+
+ /* If we've got modes, let's pick a best default mode */
+ if (info->monspecs.modedb_len > 0) {
+
+ for (i = 0; i < info->monspecs.modedb_len; i++) {
+ if (ufx_is_valid_mode(&info->monspecs.modedb[i], info))
+ fb_add_videomode(&info->monspecs.modedb[i],
+ &info->modelist);
+ else /* if we've removed top/best mode */
+ info->monspecs.misc &= ~FB_MISC_1ST_DETAIL;
+ }
+
+ default_vmode = fb_find_best_display(&info->monspecs,
+ &info->modelist);
+ }
+
+ /* If everything else has failed, fall back to safe default mode */
+ if (default_vmode == NULL) {
+
+ struct fb_videomode fb_vmode = {0};
+
+ /* Add the standard VESA modes to our modelist
+ * Since we don't have EDID, there may be modes that
+ * overspec monitor and/or are incorrect aspect ratio, etc.
+ * But at least the user has a chance to choose
+ */
+ for (i = 0; i < VESA_MODEDB_SIZE; i++) {
+ if (ufx_is_valid_mode((struct fb_videomode *)
+ &vesa_modes[i], info))
+ fb_add_videomode(&vesa_modes[i],
+ &info->modelist);
+ }
+
+ /* default to resolution safe for projectors
+ * (since they are most common case without EDID)
+ */
+ fb_vmode.xres = 800;
+ fb_vmode.yres = 600;
+ fb_vmode.refresh = 60;
+ default_vmode = fb_find_nearest_mode(&fb_vmode,
+ &info->modelist);
+ }
+
+ /* If we have good mode and no active clients */
+ if ((default_vmode != NULL) && (dev->fb_count == 0)) {
+
+ fb_videomode_to_var(&info->var, default_vmode);
+ ufx_var_color_format(&info->var);
+
+ /* with mode size info, we can now alloc our framebuffer */
+ memcpy(&info->fix, &ufx_fix, sizeof(ufx_fix));
+ info->fix.line_length = info->var.xres *
+ (info->var.bits_per_pixel / 8);
+
+ result = ufx_realloc_framebuffer(dev, info);
+
+ } else
+ result = -EINVAL;
+
+error:
+ if (edid && (dev->edid != edid))
+ kfree(edid);
+
+ if (info->dev)
+ mutex_unlock(&info->lock);
+
+ return result;
+}
+
+static int ufx_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev;
+ struct ufx_data *dev;
+ struct fb_info *info = 0;
+ int retval = -ENOMEM;
+ u32 id_rev, fpga_rev;
+
+ /* usb initialization */
+ usbdev = interface_to_usbdev(interface);
+ BUG_ON(!usbdev);
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&usbdev->dev, "ufx_usb_probe: failed alloc of dev struct\n");
+ goto error;
+ }
+
+ /* we need to wait for both usb and fbdev to spin down on disconnect */
+ kref_init(&dev->kref); /* matching kref_put in usb .disconnect fn */
+ kref_get(&dev->kref); /* matching kref_put in free_framebuffer_work */
+
+ dev->udev = usbdev;
+ dev->gdev = &usbdev->dev; /* our generic struct device * */
+ usb_set_intfdata(interface, dev);
+
+ dev_dbg(dev->gdev, "%s %s - serial #%s\n",
+ usbdev->manufacturer, usbdev->product, usbdev->serial);
+ dev_dbg(dev->gdev, "vid_%04x&pid_%04x&rev_%04x driver's ufx_data struct at %p\n",
+ usbdev->descriptor.idVendor, usbdev->descriptor.idProduct,
+ usbdev->descriptor.bcdDevice, dev);
+ dev_dbg(dev->gdev, "console enable=%d\n", console);
+ dev_dbg(dev->gdev, "fb_defio enable=%d\n", fb_defio);
+
+ if (!ufx_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
+ retval = -ENOMEM;
+ dev_err(dev->gdev, "ufx_alloc_urb_list failed\n");
+ goto error;
+ }
+
+ /* We don't register a new USB class. Our client interface is fbdev */
+
+ /* allocates framebuffer driver structure, not framebuffer memory */
+ info = framebuffer_alloc(0, &usbdev->dev);
+ if (!info) {
+ retval = -ENOMEM;
+ dev_err(dev->gdev, "framebuffer_alloc failed\n");
+ goto error;
+ }
+
+ dev->info = info;
+ info->par = dev;
+ info->pseudo_palette = dev->pseudo_palette;
+ info->fbops = &ufx_ops;
+
+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (retval < 0) {
+ dev_err(dev->gdev, "fb_alloc_cmap failed %x\n", retval);
+ goto error;
+ }
+
+ INIT_DELAYED_WORK(&dev->free_framebuffer_work,
+ ufx_free_framebuffer_work);
+
+ INIT_LIST_HEAD(&info->modelist);
+
+ retval = ufx_reg_read(dev, 0x3000, &id_rev);
+ check_warn_goto_error(retval, "error %d reading 0x3000 register from device", retval);
+ dev_dbg(dev->gdev, "ID_REV register value 0x%08x", id_rev);
+
+ retval = ufx_reg_read(dev, 0x3004, &fpga_rev);
+ check_warn_goto_error(retval, "error %d reading 0x3004 register from device", retval);
+ dev_dbg(dev->gdev, "FPGA_REV register value 0x%08x", fpga_rev);
+
+ dev_dbg(dev->gdev, "resetting device");
+ retval = ufx_lite_reset(dev);
+ check_warn_goto_error(retval, "error %d resetting device", retval);
+
+ dev_dbg(dev->gdev, "configuring system clock");
+ retval = ufx_config_sys_clk(dev);
+ check_warn_goto_error(retval, "error %d configuring system clock", retval);
+
+ dev_dbg(dev->gdev, "configuring DDR2 controller");
+ retval = ufx_config_ddr2(dev);
+ check_warn_goto_error(retval, "error %d initialising DDR2 controller", retval);
+
+ dev_dbg(dev->gdev, "configuring I2C controller");
+ retval = ufx_i2c_init(dev);
+ check_warn_goto_error(retval, "error %d initialising I2C controller", retval);
+
+ dev_dbg(dev->gdev, "selecting display mode");
+ retval = ufx_setup_modes(dev, info, NULL, 0);
+ check_warn_goto_error(retval, "unable to find common mode for display and adapter");
+
+ retval = ufx_reg_set_bits(dev, 0x4000, 0x00000001);
+ check_warn_goto_error(retval, "error %d enabling graphics engine", retval);
+
+ /* ready to begin using device */
+ atomic_set(&dev->usb_active, 1);
+
+ dev_dbg(dev->gdev, "checking var");
+ retval = ufx_ops_check_var(&info->var, info);
+ check_warn_goto_error(retval, "error %d ufx_ops_check_var", retval);
+
+ dev_dbg(dev->gdev, "setting par");
+ retval = ufx_ops_set_par(info);
+ check_warn_goto_error(retval, "error %d ufx_ops_set_par", retval);
+
+ dev_dbg(dev->gdev, "registering framebuffer");
+ retval = register_framebuffer(info);
+ check_warn_goto_error(retval, "error %d register_framebuffer", retval);
+
+ dev_info(dev->gdev, "SMSC UDX USB device /dev/fb%d attached. %dx%d resolution."
+ " Using %dK framebuffer memory\n", info->node,
+ info->var.xres, info->var.yres, info->fix.smem_len >> 10);
+
+ return 0;
+
+error:
+ if (dev) {
+ if (info) {
+ if (info->cmap.len != 0)
+ fb_dealloc_cmap(&info->cmap);
+ if (info->monspecs.modedb)
+ fb_destroy_modedb(info->monspecs.modedb);
+ if (info->screen_base)
+ vfree(info->screen_base);
+
+ fb_destroy_modelist(&info->modelist);
+
+ framebuffer_release(info);
+ }
+
+ kref_put(&dev->kref, ufx_free); /* ref for framebuffer */
+ kref_put(&dev->kref, ufx_free); /* last ref from kref_init */
+
+ /* dev has been deallocated. Do not dereference */
+ }
+
+ return retval;
+}
+
+static void ufx_usb_disconnect(struct usb_interface *interface)
+{
+ struct ufx_data *dev;
+ struct fb_info *info;
+
+ dev = usb_get_intfdata(interface);
+ info = dev->info;
+
+ pr_debug("USB disconnect starting\n");
+
+ /* we virtualize until all fb clients release. Then we free */
+ dev->virtualized = true;
+
+ /* When non-active we'll update virtual framebuffer, but no new urbs */
+ atomic_set(&dev->usb_active, 0);
+
+ usb_set_intfdata(interface, NULL);
+
+ /* if clients still have us open, will be freed on last close */
+ if (dev->fb_count == 0)
+ schedule_delayed_work(&dev->free_framebuffer_work, 0);
+
+ /* release reference taken by kref_init in probe() */
+ kref_put(&dev->kref, ufx_free);
+
+ /* consider ufx_data freed */
+}
+
+static struct usb_driver ufx_driver = {
+ .name = "smscufx",
+ .probe = ufx_usb_probe,
+ .disconnect = ufx_usb_disconnect,
+ .id_table = id_table,
+};
+
+static int __init ufx_module_init(void)
+{
+ int res;
+
+ res = usb_register(&ufx_driver);
+ if (res)
+ err("usb_register failed. Error number %d", res);
+
+ return res;
+}
+
+static void __exit ufx_module_exit(void)
+{
+ usb_deregister(&ufx_driver);
+}
+
+module_init(ufx_module_init);
+module_exit(ufx_module_exit);
+
+static void ufx_urb_completion(struct urb *urb)
+{
+ struct urb_node *unode = urb->context;
+ struct ufx_data *dev = unode->dev;
+ unsigned long flags;
+
+ /* sync/async unlink faults aren't errors */
+ if (urb->status) {
+ if (!(urb->status == -ENOENT ||
+ urb->status == -ECONNRESET ||
+ urb->status == -ESHUTDOWN)) {
+ pr_err("%s - nonzero write bulk status received: %d\n",
+ __func__, urb->status);
+ atomic_set(&dev->lost_pixels, 1);
+ }
+ }
+
+ urb->transfer_buffer_length = dev->urbs.size; /* reset to actual */
+
+ spin_lock_irqsave(&dev->urbs.lock, flags);
+ list_add_tail(&unode->entry, &dev->urbs.list);
+ dev->urbs.available++;
+ spin_unlock_irqrestore(&dev->urbs.lock, flags);
+
+ /* When using fb_defio, we deadlock if up() is called
+ * while another is waiting. So queue to another process */
+ if (fb_defio)
+ schedule_delayed_work(&unode->release_urb_work, 0);
+ else
+ up(&dev->urbs.limit_sem);
+}
+
+static void ufx_free_urb_list(struct ufx_data *dev)
+{
+ int count = dev->urbs.count;
+ struct list_head *node;
+ struct urb_node *unode;
+ struct urb *urb;
+ int ret;
+ unsigned long flags;
+
+ pr_debug("Waiting for completes and freeing all render urbs\n");
+
+ /* keep waiting and freeing, until we've got 'em all */
+ while (count--) {
+ /* Getting interrupted means a leak, but ok at shutdown*/
+ ret = down_interruptible(&dev->urbs.limit_sem);
+ if (ret)
+ break;
+
+ spin_lock_irqsave(&dev->urbs.lock, flags);
+
+ node = dev->urbs.list.next; /* have reserved one with sem */
+ list_del_init(node);
+
+ spin_unlock_irqrestore(&dev->urbs.lock, flags);
+
+ unode = list_entry(node, struct urb_node, entry);
+ urb = unode->urb;
+
+ /* Free each separately allocated piece */
+ usb_free_coherent(urb->dev, dev->urbs.size,
+ urb->transfer_buffer, urb->transfer_dma);
+ usb_free_urb(urb);
+ kfree(node);
+ }
+}
+
+static int ufx_alloc_urb_list(struct ufx_data *dev, int count, size_t size)
+{
+ int i = 0;
+ struct urb *urb;
+ struct urb_node *unode;
+ char *buf;
+
+ spin_lock_init(&dev->urbs.lock);
+
+ dev->urbs.size = size;
+ INIT_LIST_HEAD(&dev->urbs.list);
+
+ while (i < count) {
+ unode = kzalloc(sizeof(struct urb_node), GFP_KERNEL);
+ if (!unode)
+ break;
+ unode->dev = dev;
+
+ INIT_DELAYED_WORK(&unode->release_urb_work,
+ ufx_release_urb_work);
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ kfree(unode);
+ break;
+ }
+ unode->urb = urb;
+
+ buf = usb_alloc_coherent(dev->udev, size, GFP_KERNEL,
+ &urb->transfer_dma);
+ if (!buf) {
+ kfree(unode);
+ usb_free_urb(urb);
+ break;
+ }
+
+ /* urb->transfer_buffer_length set to actual before submit */
+ usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 1),
+ buf, size, ufx_urb_completion, unode);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ list_add_tail(&unode->entry, &dev->urbs.list);
+
+ i++;
+ }
+
+ sema_init(&dev->urbs.limit_sem, i);
+ dev->urbs.count = i;
+ dev->urbs.available = i;
+
+ pr_debug("allocated %d %d byte urbs\n", i, (int) size);
+
+ return i;
+}
+
+static struct urb *ufx_get_urb(struct ufx_data *dev)
+{
+ int ret = 0;
+ struct list_head *entry;
+ struct urb_node *unode;
+ struct urb *urb = NULL;
+ unsigned long flags;
+
+ /* Wait for an in-flight buffer to complete and get re-queued */
+ ret = down_timeout(&dev->urbs.limit_sem, GET_URB_TIMEOUT);
+ if (ret) {
+ atomic_set(&dev->lost_pixels, 1);
+ pr_warn("wait for urb interrupted: %x available: %d\n",
+ ret, dev->urbs.available);
+ goto error;
+ }
+
+ spin_lock_irqsave(&dev->urbs.lock, flags);
+
+ BUG_ON(list_empty(&dev->urbs.list)); /* reserved one with limit_sem */
+ entry = dev->urbs.list.next;
+ list_del_init(entry);
+ dev->urbs.available--;
+
+ spin_unlock_irqrestore(&dev->urbs.lock, flags);
+
+ unode = list_entry(entry, struct urb_node, entry);
+ urb = unode->urb;
+
+error:
+ return urb;
+}
+
+static int ufx_submit_urb(struct ufx_data *dev, struct urb *urb, size_t len)
+{
+ int ret;
+
+ BUG_ON(len > dev->urbs.size);
+
+ urb->transfer_buffer_length = len; /* set to actual payload len */
+ ret = usb_submit_urb(urb, GFP_KERNEL);
+ if (ret) {
+ ufx_urb_completion(urb); /* because no one else will */
+ atomic_set(&dev->lost_pixels, 1);
+ pr_err("usb_submit_urb error %x\n", ret);
+ }
+ return ret;
+}
+
+module_param(console, bool, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP);
+MODULE_PARM_DESC(console, "Allow fbcon to be used on this display");
+
+module_param(fb_defio, bool, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP);
+MODULE_PARM_DESC(fb_defio, "Enable fb_defio mmap support");
+
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_DESCRIPTION("SMSC UFX kernel framebuffer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
index cd1c4dce..8e4a446 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/tmiofb.c
@@ -744,7 +744,7 @@
goto err_ioremap_vram;
}
- retval = request_irq(irq, &tmiofb_irq, IRQF_DISABLED,
+ retval = request_irq(irq, &tmiofb_irq, 0,
dev_name(&dev->dev), info);
if (retval)
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index c6c7756..34cf019 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -987,8 +987,8 @@
unsigned int offset;
debug("enter\n");
- offset = (var->xoffset + (var->yoffset * var->xres_virtual))
- * var->bits_per_pixel / 32;
+ offset = (var->xoffset + (var->yoffset * info->var.xres_virtual))
+ * info->var.bits_per_pixel / 32;
set_screen_start(par, offset);
debug("exit\n");
return 0;
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 087fc99..3473e75 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -48,20 +48,30 @@
FBINFO_HWACCEL_COPYAREA | FBINFO_MISC_ALWAYS_SETPAR;
/*
- * There are many DisplayLink-based products, all with unique PIDs. We are able
- * to support all volume ones (circa 2009) with a single driver, so we match
- * globally on VID. TODO: Probe() needs to detect when we might be running
- * "future" chips, and bail on those, so a compatible driver can match.
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
*/
static struct usb_device_id id_table[] = {
- {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+ {.idVendor = 0x17e9,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0x00,
+ .bInterfaceProtocol = 0x00,
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL,
+ },
{},
};
MODULE_DEVICE_TABLE(usb, id_table);
/* module options */
-static int console; /* Optionally allow fbcon to consume first framebuffer */
-static int fb_defio; /* Optionally enable experimental fb_defio mmap support */
+static int console = 1; /* Allow fbcon to open framebuffer */
+static int fb_defio = 1; /* Detect mmap writes using page faults */
+static int shadow = 1; /* Optionally disable shadow framebuffer */
/* dlfb keeps a list of urbs for efficient bulk transfers */
static void dlfb_urb_completion(struct urb *urb);
@@ -94,17 +104,39 @@
}
/*
- * On/Off for driving the DisplayLink framebuffer to the display
- * 0x00 H and V sync on
- * 0x01 H and V sync off (screen blank but powered)
- * 0x07 DPMS powerdown (requires modeset to come back)
+ * Map FB_BLANK_* to DisplayLink register
+ * DLReg FB_BLANK_*
+ * ----- -----------------------------
+ * 0x00 FB_BLANK_UNBLANK (0)
+ * 0x01 FB_BLANK (1)
+ * 0x03 FB_BLANK_VSYNC_SUSPEND (2)
+ * 0x05 FB_BLANK_HSYNC_SUSPEND (3)
+ * 0x07 FB_BLANK_POWERDOWN (4) Note: requires modeset to come back
*/
-static char *dlfb_enable_hvsync(char *buf, bool enable)
+static char *dlfb_blanking(char *buf, int fb_blank)
{
- if (enable)
- return dlfb_set_register(buf, 0x1F, 0x00);
- else
- return dlfb_set_register(buf, 0x1F, 0x07);
+ u8 reg;
+
+ switch (fb_blank) {
+ case FB_BLANK_POWERDOWN:
+ reg = 0x07;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ reg = 0x05;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ reg = 0x03;
+ break;
+ case FB_BLANK_NORMAL:
+ reg = 0x01;
+ break;
+ default:
+ reg = 0x00;
+ }
+
+ buf = dlfb_set_register(buf, 0x1F, reg);
+
+ return buf;
}
static char *dlfb_set_color_depth(char *buf, u8 selection)
@@ -272,13 +304,15 @@
wrptr = dlfb_set_base8bpp(wrptr, dev->info->fix.smem_len);
wrptr = dlfb_set_vid_cmds(wrptr, var);
- wrptr = dlfb_enable_hvsync(wrptr, true);
+ wrptr = dlfb_blanking(wrptr, FB_BLANK_UNBLANK);
wrptr = dlfb_vidreg_unlock(wrptr);
writesize = wrptr - buf;
retval = dlfb_submit_urb(dev, urb, writesize);
+ dev->blank_mode = FB_BLANK_UNBLANK;
+
return retval;
}
@@ -752,14 +786,13 @@
{
struct dlfb_data *dev = info->par;
- struct dloarea *area = NULL;
if (!atomic_read(&dev->usb_active))
return 0;
/* TODO: Update X server to get this from sysfs instead */
if (cmd == DLFB_IOCTL_RETURN_EDID) {
- char *edid = (char *)arg;
+ void __user *edid = (void __user *)arg;
if (copy_to_user(edid, dev->edid, dev->edid_size))
return -EFAULT;
return 0;
@@ -767,6 +800,11 @@
/* TODO: Help propose a standard fb.h ioctl to report mmap damage */
if (cmd == DLFB_IOCTL_REPORT_DAMAGE) {
+ struct dloarea area;
+
+ if (copy_from_user(&area, (void __user *)arg,
+ sizeof(struct dloarea)))
+ return -EFAULT;
/*
* If we have a damage-aware client, turn fb_defio "off"
@@ -778,21 +816,19 @@
if (info->fbdefio)
info->fbdefio->delay = DL_DEFIO_WRITE_DISABLE;
- area = (struct dloarea *)arg;
+ if (area.x < 0)
+ area.x = 0;
- if (area->x < 0)
- area->x = 0;
+ if (area.x > info->var.xres)
+ area.x = info->var.xres;
- if (area->x > info->var.xres)
- area->x = info->var.xres;
+ if (area.y < 0)
+ area.y = 0;
- if (area->y < 0)
- area->y = 0;
+ if (area.y > info->var.yres)
+ area.y = info->var.yres;
- if (area->y > info->var.yres)
- area->y = info->var.yres;
-
- dlfb_handle_damage(dev, area->x, area->y, area->w, area->h,
+ dlfb_handle_damage(dev, area.x, area.y, area.w, area.h,
info->screen_base);
}
@@ -840,7 +876,7 @@
* preventing other clients (X) from working properly. Usually
* not what the user wants. Fail by default with option to enable.
*/
- if ((user == 0) & (!console))
+ if ((user == 0) && (!console))
return -EBUSY;
/* If the USB device is gone, we don't accept new opens */
@@ -1039,32 +1075,57 @@
return result;
}
+/* To fonzi the jukebox (e.g. make blanking changes take effect) */
+static char *dlfb_dummy_render(char *buf)
+{
+ *buf++ = 0xAF;
+ *buf++ = 0x6A; /* copy */
+ *buf++ = 0x00; /* from address*/
+ *buf++ = 0x00;
+ *buf++ = 0x00;
+ *buf++ = 0x01; /* one pixel */
+ *buf++ = 0x00; /* to address */
+ *buf++ = 0x00;
+ *buf++ = 0x00;
+ return buf;
+}
+
/*
* In order to come back from full DPMS off, we need to set the mode again
*/
static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
{
struct dlfb_data *dev = info->par;
+ char *bufptr;
+ struct urb *urb;
- if (blank_mode != FB_BLANK_UNBLANK) {
- char *bufptr;
- struct urb *urb;
+ pr_info("/dev/fb%d FB_BLANK mode %d --> %d\n",
+ info->node, dev->blank_mode, blank_mode);
- urb = dlfb_get_urb(dev);
- if (!urb)
- return 0;
+ if ((dev->blank_mode == FB_BLANK_POWERDOWN) &&
+ (blank_mode != FB_BLANK_POWERDOWN)) {
- bufptr = (char *) urb->transfer_buffer;
- bufptr = dlfb_vidreg_lock(bufptr);
- bufptr = dlfb_enable_hvsync(bufptr, false);
- bufptr = dlfb_vidreg_unlock(bufptr);
-
- dlfb_submit_urb(dev, urb, bufptr -
- (char *) urb->transfer_buffer);
- } else {
+ /* returning from powerdown requires a fresh modeset */
dlfb_set_video_mode(dev, &info->var);
}
+ urb = dlfb_get_urb(dev);
+ if (!urb)
+ return 0;
+
+ bufptr = (char *) urb->transfer_buffer;
+ bufptr = dlfb_vidreg_lock(bufptr);
+ bufptr = dlfb_blanking(bufptr, blank_mode);
+ bufptr = dlfb_vidreg_unlock(bufptr);
+
+ /* seems like a render op is needed to have blank change take effect */
+ bufptr = dlfb_dummy_render(bufptr);
+
+ dlfb_submit_urb(dev, urb, bufptr -
+ (char *) urb->transfer_buffer);
+
+ dev->blank_mode = blank_mode;
+
return 0;
}
@@ -1097,7 +1158,7 @@
int new_len;
unsigned char *old_fb = info->screen_base;
unsigned char *new_fb;
- unsigned char *new_back;
+ unsigned char *new_back = 0;
pr_warn("Reallocating framebuffer. Addresses will change!\n");
@@ -1129,7 +1190,8 @@
* But with imperfect damage info we may send pixels over USB
* that were, in fact, unchanged - wasting limited USB bandwidth
*/
- new_back = vzalloc(new_len);
+ if (shadow)
+ new_back = vzalloc(new_len);
if (!new_back)
pr_info("No shadow/backing buffer allocated\n");
else {
@@ -1430,21 +1492,30 @@
}
static int dlfb_parse_vendor_descriptor(struct dlfb_data *dev,
- struct usb_device *usbdev)
+ struct usb_interface *interface)
{
char *desc;
char *buf;
char *desc_end;
- u8 total_len = 0;
+ int total_len = 0;
buf = kzalloc(MAX_VENDOR_DESCRIPTOR_SIZE, GFP_KERNEL);
if (!buf)
return false;
desc = buf;
- total_len = usb_get_descriptor(usbdev, 0x5f, /* vendor specific */
- 0, desc, MAX_VENDOR_DESCRIPTOR_SIZE);
+ total_len = usb_get_descriptor(interface_to_usbdev(interface),
+ 0x5f, /* vendor specific */
+ 0, desc, MAX_VENDOR_DESCRIPTOR_SIZE);
+
+ /* if not found, look in configuration descriptor */
+ if (total_len < 0) {
+ if (0 == usb_get_extra_descriptor(interface->cur_altsetting,
+ 0x5f, &desc))
+ total_len = (int) desc[0];
+ }
+
if (total_len > 5) {
pr_info("vendor descriptor length:%x data:%02x %02x %02x %02x" \
"%02x %02x %02x %02x %02x %02x %02x\n",
@@ -1485,6 +1556,8 @@
}
desc += length;
}
+ } else {
+ pr_info("vendor descriptor not available (%d)\n", total_len);
}
goto success;
@@ -1531,10 +1604,11 @@
usbdev->descriptor.bcdDevice, dev);
pr_info("console enable=%d\n", console);
pr_info("fb_defio enable=%d\n", fb_defio);
+ pr_info("shadow enable=%d\n", shadow);
dev->sku_pixel_limit = 2048 * 1152; /* default to maximum */
- if (!dlfb_parse_vendor_descriptor(dev, usbdev)) {
+ if (!dlfb_parse_vendor_descriptor(dev, interface)) {
pr_err("firmware not recognized. Assume incompatible device\n");
goto error;
}
@@ -1548,7 +1622,7 @@
/* We don't register a new USB class. Our client interface is fbdev */
/* allocates framebuffer driver structure, not framebuffer memory */
- info = framebuffer_alloc(0, &usbdev->dev);
+ info = framebuffer_alloc(0, &interface->dev);
if (!info) {
retval = -ENOMEM;
pr_err("framebuffer_alloc failed\n");
@@ -1883,10 +1957,13 @@
}
module_param(console, bool, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP);
-MODULE_PARM_DESC(console, "Allow fbcon to consume first framebuffer found");
+MODULE_PARM_DESC(console, "Allow fbcon to open framebuffer");
module_param(fb_defio, bool, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP);
-MODULE_PARM_DESC(fb_defio, "Enable fb_defio mmap support. *Experimental*");
+MODULE_PARM_DESC(fb_defio, "Page fault detection of mmap writes");
+
+module_param(shadow, bool, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP);
+MODULE_PARM_DESC(shadow, "Shadow vid mem. Disable to save mem but lose perf");
MODULE_AUTHOR("Roberto De Ioris <roberto@unbit.it>, "
"Jaya Kumar <jayakumar.lkml@gmail.com>, "
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
index 6b52bf6..3f5a041 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -555,7 +555,7 @@
/*
- * Parse user speficied options (`video=valkyriefb:')
+ * Parse user specified options (`video=valkyriefb:')
*/
int __init valkyriefb_setup(char *options)
{
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index bc67251..bf2f780 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -395,8 +395,8 @@
|| var->xoffset)
return -EINVAL;
} else {
- if (var->xoffset + var->xres > info->var.xres_virtual ||
- var->yoffset + var->yres > info->var.yres_virtual)
+ if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+ var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
}
info->var.xoffset = var->xoffset;
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 305c975..0267acd 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -207,7 +207,7 @@
* granularity if someone supports xoffset in bit resolution */
vga_io_r(VGA_IS1_RC); /* reset flip-flop */
vga_io_w(VGA_ATT_IW, VGA_ATC_PEL);
- if (var->bits_per_pixel == 8)
+ if (info->var.bits_per_pixel == 8)
vga_io_w(VGA_ATT_IW, (xoffset & 3) << 1);
else
vga_io_w(VGA_ATT_IW, xoffset & 7);
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index b1f3647..9138e517 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -172,30 +172,20 @@
}
/* DVI Set Mode */
-void viafb_dvi_set_mode(struct VideoModeTable *mode, int mode_bpp,
- int set_iga)
+void viafb_dvi_set_mode(const struct fb_var_screeninfo *var, int iga)
{
- struct VideoModeTable *rb_mode;
- struct crt_mode_table *pDviTiming;
- unsigned long desirePixelClock, maxPixelClock;
- pDviTiming = mode->crtc;
- desirePixelClock = pDviTiming->refresh_rate
- * pDviTiming->crtc.hor_total * pDviTiming->crtc.ver_total
- / 1000000;
- maxPixelClock = (unsigned long)viaparinfo->
- tmds_setting_info->max_pixel_clock;
+ struct fb_var_screeninfo dvi_var = *var;
+ struct crt_mode_table *rb_mode;
+ int maxPixelClock;
- DEBUG_MSG(KERN_INFO "\nDVI_set_mode!!\n");
-
- if ((maxPixelClock != 0) && (desirePixelClock > maxPixelClock)) {
- rb_mode = viafb_get_rb_mode(mode->crtc[0].crtc.hor_addr,
- mode->crtc[0].crtc.ver_addr);
- if (rb_mode) {
- mode = rb_mode;
- pDviTiming = rb_mode->crtc;
- }
+ maxPixelClock = viaparinfo->shared->tmds_setting_info.max_pixel_clock;
+ if (maxPixelClock && PICOS2KHZ(var->pixclock) / 1000 > maxPixelClock) {
+ rb_mode = viafb_get_best_rb_mode(var->xres, var->yres, 60);
+ if (rb_mode)
+ viafb_fill_var_timing_info(&dvi_var, rb_mode);
}
- viafb_fill_crtc_timing(pDviTiming, mode, mode_bpp / 8, set_iga);
+
+ viafb_fill_crtc_timing(&dvi_var, iga);
}
/* Sense DVI Connector */
diff --git a/drivers/video/via/dvi.h b/drivers/video/via/dvi.h
index f473dd0..e2116aa 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/via/dvi.h
@@ -59,7 +59,6 @@
bool __devinit viafb_tmds_trasmitter_identify(void);
void __devinit viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
struct tmds_setting_information *tmds_setting);
-void viafb_dvi_set_mode(struct VideoModeTable *videoMode, int mode_bpp,
- int set_iga);
+void viafb_dvi_set_mode(const struct fb_var_screeninfo *var, int iga);
#endif /* __DVI_H__ */
diff --git a/drivers/video/via/global.c b/drivers/video/via/global.c
index e10d824..3102171 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/via/global.c
@@ -35,6 +35,8 @@
int viafb_LCD2_ON;
int viafb_SAMM_ON;
int viafb_dual_fb;
+unsigned int viafb_second_xres = 640;
+unsigned int viafb_second_yres = 480;
int viafb_hotplug_Xres = 640;
int viafb_hotplug_Yres = 480;
int viafb_hotplug_bpp = 32;
diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h
index ff969dc..275dbbb 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/via/global.h
@@ -67,6 +67,8 @@
extern int viafb_lcd_mode;
extern int viafb_CRT_ON;
+extern unsigned int viafb_second_xres;
+extern unsigned int viafb_second_yres;
extern int viafb_hotplug_Xres;
extern int viafb_hotplug_Yres;
extern int viafb_hotplug_bpp;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 47b1353..d5aaca9 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -191,67 +191,6 @@
{IGA2_FETCH_COUNT_REG_NUM, {{CR65, 0, 7}, {CR67, 2, 3} } }
};
-static struct iga1_crtc_timing iga1_crtc_reg = {
- /* IGA1 Horizontal Total */
- {IGA1_HOR_TOTAL_REG_NUM, {{CR00, 0, 7}, {CR36, 3, 3} } },
- /* IGA1 Horizontal Addressable Video */
- {IGA1_HOR_ADDR_REG_NUM, {{CR01, 0, 7} } },
- /* IGA1 Horizontal Blank Start */
- {IGA1_HOR_BLANK_START_REG_NUM, {{CR02, 0, 7} } },
- /* IGA1 Horizontal Blank End */
- {IGA1_HOR_BLANK_END_REG_NUM,
- {{CR03, 0, 4}, {CR05, 7, 7}, {CR33, 5, 5} } },
- /* IGA1 Horizontal Sync Start */
- {IGA1_HOR_SYNC_START_REG_NUM, {{CR04, 0, 7}, {CR33, 4, 4} } },
- /* IGA1 Horizontal Sync End */
- {IGA1_HOR_SYNC_END_REG_NUM, {{CR05, 0, 4} } },
- /* IGA1 Vertical Total */
- {IGA1_VER_TOTAL_REG_NUM,
- {{CR06, 0, 7}, {CR07, 0, 0}, {CR07, 5, 5}, {CR35, 0, 0} } },
- /* IGA1 Vertical Addressable Video */
- {IGA1_VER_ADDR_REG_NUM,
- {{CR12, 0, 7}, {CR07, 1, 1}, {CR07, 6, 6}, {CR35, 2, 2} } },
- /* IGA1 Vertical Blank Start */
- {IGA1_VER_BLANK_START_REG_NUM,
- {{CR15, 0, 7}, {CR07, 3, 3}, {CR09, 5, 5}, {CR35, 3, 3} } },
- /* IGA1 Vertical Blank End */
- {IGA1_VER_BLANK_END_REG_NUM, {{CR16, 0, 7} } },
- /* IGA1 Vertical Sync Start */
- {IGA1_VER_SYNC_START_REG_NUM,
- {{CR10, 0, 7}, {CR07, 2, 2}, {CR07, 7, 7}, {CR35, 1, 1} } },
- /* IGA1 Vertical Sync End */
- {IGA1_VER_SYNC_END_REG_NUM, {{CR11, 0, 3} } }
-};
-
-static struct iga2_crtc_timing iga2_crtc_reg = {
- /* IGA2 Horizontal Total */
- {IGA2_HOR_TOTAL_REG_NUM, {{CR50, 0, 7}, {CR55, 0, 3} } },
- /* IGA2 Horizontal Addressable Video */
- {IGA2_HOR_ADDR_REG_NUM, {{CR51, 0, 7}, {CR55, 4, 6} } },
- /* IGA2 Horizontal Blank Start */
- {IGA2_HOR_BLANK_START_REG_NUM, {{CR52, 0, 7}, {CR54, 0, 2} } },
- /* IGA2 Horizontal Blank End */
- {IGA2_HOR_BLANK_END_REG_NUM,
- {{CR53, 0, 7}, {CR54, 3, 5}, {CR5D, 6, 6} } },
- /* IGA2 Horizontal Sync Start */
- {IGA2_HOR_SYNC_START_REG_NUM,
- {{CR56, 0, 7}, {CR54, 6, 7}, {CR5C, 7, 7}, {CR5D, 7, 7} } },
- /* IGA2 Horizontal Sync End */
- {IGA2_HOR_SYNC_END_REG_NUM, {{CR57, 0, 7}, {CR5C, 6, 6} } },
- /* IGA2 Vertical Total */
- {IGA2_VER_TOTAL_REG_NUM, {{CR58, 0, 7}, {CR5D, 0, 2} } },
- /* IGA2 Vertical Addressable Video */
- {IGA2_VER_ADDR_REG_NUM, {{CR59, 0, 7}, {CR5D, 3, 5} } },
- /* IGA2 Vertical Blank Start */
- {IGA2_VER_BLANK_START_REG_NUM, {{CR5A, 0, 7}, {CR5C, 0, 2} } },
- /* IGA2 Vertical Blank End */
- {IGA2_VER_BLANK_END_REG_NUM, {{CR5B, 0, 7}, {CR5C, 3, 5} } },
- /* IGA2 Vertical Sync Start */
- {IGA2_VER_SYNC_START_REG_NUM, {{CR5E, 0, 7}, {CR5F, 5, 7} } },
- /* IGA2 Vertical Sync End */
- {IGA2_VER_SYNC_END_REG_NUM, {{CR5F, 0, 4} } }
-};
-
static struct rgbLUT palLUT_table[] = {
/* {R,G,B} */
/* Index 0x00~0x03 */
@@ -1528,302 +1467,40 @@
via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
}
-void viafb_load_crtc_timing(struct display_timing device_timing,
- int set_iga)
+static struct display_timing var_to_timing(const struct fb_var_screeninfo *var)
{
- int i;
- int viafb_load_reg_num = 0;
- int reg_value = 0;
- struct io_register *reg = NULL;
+ struct display_timing timing;
- viafb_unlock_crt();
-
- for (i = 0; i < 12; i++) {
- if (set_iga == IGA1) {
- switch (i) {
- case H_TOTAL_INDEX:
- reg_value =
- IGA1_HOR_TOTAL_FORMULA(device_timing.
- hor_total);
- viafb_load_reg_num =
- iga1_crtc_reg.hor_total.reg_num;
- reg = iga1_crtc_reg.hor_total.reg;
- break;
- case H_ADDR_INDEX:
- reg_value =
- IGA1_HOR_ADDR_FORMULA(device_timing.
- hor_addr);
- viafb_load_reg_num =
- iga1_crtc_reg.hor_addr.reg_num;
- reg = iga1_crtc_reg.hor_addr.reg;
- break;
- case H_BLANK_START_INDEX:
- reg_value =
- IGA1_HOR_BLANK_START_FORMULA
- (device_timing.hor_blank_start);
- viafb_load_reg_num =
- iga1_crtc_reg.hor_blank_start.reg_num;
- reg = iga1_crtc_reg.hor_blank_start.reg;
- break;
- case H_BLANK_END_INDEX:
- reg_value =
- IGA1_HOR_BLANK_END_FORMULA
- (device_timing.hor_blank_start,
- device_timing.hor_blank_end);
- viafb_load_reg_num =
- iga1_crtc_reg.hor_blank_end.reg_num;
- reg = iga1_crtc_reg.hor_blank_end.reg;
- break;
- case H_SYNC_START_INDEX:
- reg_value =
- IGA1_HOR_SYNC_START_FORMULA
- (device_timing.hor_sync_start);
- viafb_load_reg_num =
- iga1_crtc_reg.hor_sync_start.reg_num;
- reg = iga1_crtc_reg.hor_sync_start.reg;
- break;
- case H_SYNC_END_INDEX:
- reg_value =
- IGA1_HOR_SYNC_END_FORMULA
- (device_timing.hor_sync_start,
- device_timing.hor_sync_end);
- viafb_load_reg_num =
- iga1_crtc_reg.hor_sync_end.reg_num;
- reg = iga1_crtc_reg.hor_sync_end.reg;
- break;
- case V_TOTAL_INDEX:
- reg_value =
- IGA1_VER_TOTAL_FORMULA(device_timing.
- ver_total);
- viafb_load_reg_num =
- iga1_crtc_reg.ver_total.reg_num;
- reg = iga1_crtc_reg.ver_total.reg;
- break;
- case V_ADDR_INDEX:
- reg_value =
- IGA1_VER_ADDR_FORMULA(device_timing.
- ver_addr);
- viafb_load_reg_num =
- iga1_crtc_reg.ver_addr.reg_num;
- reg = iga1_crtc_reg.ver_addr.reg;
- break;
- case V_BLANK_START_INDEX:
- reg_value =
- IGA1_VER_BLANK_START_FORMULA
- (device_timing.ver_blank_start);
- viafb_load_reg_num =
- iga1_crtc_reg.ver_blank_start.reg_num;
- reg = iga1_crtc_reg.ver_blank_start.reg;
- break;
- case V_BLANK_END_INDEX:
- reg_value =
- IGA1_VER_BLANK_END_FORMULA
- (device_timing.ver_blank_start,
- device_timing.ver_blank_end);
- viafb_load_reg_num =
- iga1_crtc_reg.ver_blank_end.reg_num;
- reg = iga1_crtc_reg.ver_blank_end.reg;
- break;
- case V_SYNC_START_INDEX:
- reg_value =
- IGA1_VER_SYNC_START_FORMULA
- (device_timing.ver_sync_start);
- viafb_load_reg_num =
- iga1_crtc_reg.ver_sync_start.reg_num;
- reg = iga1_crtc_reg.ver_sync_start.reg;
- break;
- case V_SYNC_END_INDEX:
- reg_value =
- IGA1_VER_SYNC_END_FORMULA
- (device_timing.ver_sync_start,
- device_timing.ver_sync_end);
- viafb_load_reg_num =
- iga1_crtc_reg.ver_sync_end.reg_num;
- reg = iga1_crtc_reg.ver_sync_end.reg;
- break;
-
- }
- }
-
- if (set_iga == IGA2) {
- switch (i) {
- case H_TOTAL_INDEX:
- reg_value =
- IGA2_HOR_TOTAL_FORMULA(device_timing.
- hor_total);
- viafb_load_reg_num =
- iga2_crtc_reg.hor_total.reg_num;
- reg = iga2_crtc_reg.hor_total.reg;
- break;
- case H_ADDR_INDEX:
- reg_value =
- IGA2_HOR_ADDR_FORMULA(device_timing.
- hor_addr);
- viafb_load_reg_num =
- iga2_crtc_reg.hor_addr.reg_num;
- reg = iga2_crtc_reg.hor_addr.reg;
- break;
- case H_BLANK_START_INDEX:
- reg_value =
- IGA2_HOR_BLANK_START_FORMULA
- (device_timing.hor_blank_start);
- viafb_load_reg_num =
- iga2_crtc_reg.hor_blank_start.reg_num;
- reg = iga2_crtc_reg.hor_blank_start.reg;
- break;
- case H_BLANK_END_INDEX:
- reg_value =
- IGA2_HOR_BLANK_END_FORMULA
- (device_timing.hor_blank_start,
- device_timing.hor_blank_end);
- viafb_load_reg_num =
- iga2_crtc_reg.hor_blank_end.reg_num;
- reg = iga2_crtc_reg.hor_blank_end.reg;
- break;
- case H_SYNC_START_INDEX:
- reg_value =
- IGA2_HOR_SYNC_START_FORMULA
- (device_timing.hor_sync_start);
- if (UNICHROME_CN700 <=
- viaparinfo->chip_info->gfx_chip_name)
- viafb_load_reg_num =
- iga2_crtc_reg.hor_sync_start.
- reg_num;
- else
- viafb_load_reg_num = 3;
- reg = iga2_crtc_reg.hor_sync_start.reg;
- break;
- case H_SYNC_END_INDEX:
- reg_value =
- IGA2_HOR_SYNC_END_FORMULA
- (device_timing.hor_sync_start,
- device_timing.hor_sync_end);
- viafb_load_reg_num =
- iga2_crtc_reg.hor_sync_end.reg_num;
- reg = iga2_crtc_reg.hor_sync_end.reg;
- break;
- case V_TOTAL_INDEX:
- reg_value =
- IGA2_VER_TOTAL_FORMULA(device_timing.
- ver_total);
- viafb_load_reg_num =
- iga2_crtc_reg.ver_total.reg_num;
- reg = iga2_crtc_reg.ver_total.reg;
- break;
- case V_ADDR_INDEX:
- reg_value =
- IGA2_VER_ADDR_FORMULA(device_timing.
- ver_addr);
- viafb_load_reg_num =
- iga2_crtc_reg.ver_addr.reg_num;
- reg = iga2_crtc_reg.ver_addr.reg;
- break;
- case V_BLANK_START_INDEX:
- reg_value =
- IGA2_VER_BLANK_START_FORMULA
- (device_timing.ver_blank_start);
- viafb_load_reg_num =
- iga2_crtc_reg.ver_blank_start.reg_num;
- reg = iga2_crtc_reg.ver_blank_start.reg;
- break;
- case V_BLANK_END_INDEX:
- reg_value =
- IGA2_VER_BLANK_END_FORMULA
- (device_timing.ver_blank_start,
- device_timing.ver_blank_end);
- viafb_load_reg_num =
- iga2_crtc_reg.ver_blank_end.reg_num;
- reg = iga2_crtc_reg.ver_blank_end.reg;
- break;
- case V_SYNC_START_INDEX:
- reg_value =
- IGA2_VER_SYNC_START_FORMULA
- (device_timing.ver_sync_start);
- viafb_load_reg_num =
- iga2_crtc_reg.ver_sync_start.reg_num;
- reg = iga2_crtc_reg.ver_sync_start.reg;
- break;
- case V_SYNC_END_INDEX:
- reg_value =
- IGA2_VER_SYNC_END_FORMULA
- (device_timing.ver_sync_start,
- device_timing.ver_sync_end);
- viafb_load_reg_num =
- iga2_crtc_reg.ver_sync_end.reg_num;
- reg = iga2_crtc_reg.ver_sync_end.reg;
- break;
-
- }
- }
- viafb_load_reg(reg_value, viafb_load_reg_num, reg, VIACR);
- }
-
- viafb_lock_crt();
+ timing.hor_addr = var->xres;
+ timing.hor_sync_start = timing.hor_addr + var->right_margin;
+ timing.hor_sync_end = timing.hor_sync_start + var->hsync_len;
+ timing.hor_total = timing.hor_sync_end + var->left_margin;
+ timing.hor_blank_start = timing.hor_addr;
+ timing.hor_blank_end = timing.hor_total;
+ timing.ver_addr = var->yres;
+ timing.ver_sync_start = timing.ver_addr + var->lower_margin;
+ timing.ver_sync_end = timing.ver_sync_start + var->vsync_len;
+ timing.ver_total = timing.ver_sync_end + var->upper_margin;
+ timing.ver_blank_start = timing.ver_addr;
+ timing.ver_blank_end = timing.ver_total;
+ return timing;
}
-void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
- struct VideoModeTable *video_mode, int bpp_byte, int set_iga)
+void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var, int iga)
{
- struct display_timing crt_reg;
- int i;
- int index = 0;
- int h_addr, v_addr;
- u32 clock, refresh = viafb_refresh;
+ struct display_timing crt_reg = var_to_timing(var);
- if (viafb_SAMM_ON && set_iga == IGA2)
- refresh = viafb_refresh1;
+ if (iga == IGA1)
+ via_set_primary_timing(&crt_reg);
+ else if (iga == IGA2)
+ via_set_secondary_timing(&crt_reg);
- for (i = 0; i < video_mode->mode_array; i++) {
- index = i;
+ viafb_load_fetch_count_reg(var->xres, var->bits_per_pixel / 8, iga);
+ if (viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266
+ && viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400)
+ viafb_load_FIFO_reg(iga, var->xres, var->yres);
- if (crt_table[i].refresh_rate == refresh)
- break;
- }
-
- crt_reg = crt_table[index].crtc;
-
- /* Mode 640x480 has border, but LCD/DFP didn't have border. */
- /* So we would delete border. */
- if ((viafb_LCD_ON | viafb_DVI_ON)
- && video_mode->crtc[0].crtc.hor_addr == 640
- && video_mode->crtc[0].crtc.ver_addr == 480
- && refresh == 60) {
- /* The border is 8 pixels. */
- crt_reg.hor_blank_start = crt_reg.hor_blank_start - 8;
-
- /* Blanking time should add left and right borders. */
- crt_reg.hor_blank_end = crt_reg.hor_blank_end + 16;
- }
-
- h_addr = crt_reg.hor_addr;
- v_addr = crt_reg.ver_addr;
- if (set_iga == IGA1) {
- viafb_unlock_crt();
- viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
- }
-
- switch (set_iga) {
- case IGA1:
- viafb_load_crtc_timing(crt_reg, IGA1);
- break;
- case IGA2:
- viafb_load_crtc_timing(crt_reg, IGA2);
- break;
- }
-
- viafb_lock_crt();
- viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
- viafb_load_fetch_count_reg(h_addr, bpp_byte, set_iga);
-
- /* load FIFO */
- if ((viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266)
- && (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
- viafb_load_FIFO_reg(set_iga, h_addr, v_addr);
-
- clock = crt_reg.hor_total * crt_reg.ver_total
- * crt_table[index].refresh_rate;
- viafb_set_vclock(clock, set_iga);
-
+ viafb_set_vclock(PICOS2KHZ(var->pixclock) * 1000, iga);
}
void __devinit viafb_init_chip_info(int chip_type)
@@ -2092,23 +1769,9 @@
return polarity;
}
-int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
- struct VideoModeTable *vmode_tbl1, int video_bpp1)
+static void hw_init(void)
{
- int i, j;
- int port;
- u32 devices = viaparinfo->shared->iga1_devices
- | viaparinfo->shared->iga2_devices;
- u8 value, index, mask;
- struct crt_mode_table *crt_timing;
- struct crt_mode_table *crt_timing1 = NULL;
-
- device_screen_off();
- crt_timing = vmode_tbl->crtc;
-
- if (viafb_SAMM_ON == 1) {
- crt_timing1 = vmode_tbl1->crtc;
- }
+ int i;
inb(VIAStatus);
outb(0x00, VIAAR);
@@ -2147,9 +1810,8 @@
break;
}
+ /* probably this should go to the scaling code one day */
viafb_write_regx(scaling_parameters, ARRAY_SIZE(scaling_parameters));
- device_off();
- via_set_state(devices, VIA_STATE_OFF);
/* Fill VPIT Parameters */
/* Write Misc Register */
@@ -2175,12 +1837,29 @@
inb(VIAStatus);
outb(0x20, VIAAR);
+ load_fix_bit_crtc_reg();
+}
+
+int viafb_setmode(int video_bpp, int video_bpp1)
+{
+ int j;
+ int port;
+ u32 devices = viaparinfo->shared->iga1_devices
+ | viaparinfo->shared->iga2_devices;
+ u8 value, index, mask;
+ struct fb_var_screeninfo var2;
+
+ device_screen_off();
+ device_off();
+ via_set_state(devices, VIA_STATE_OFF);
+
+ hw_init();
+
/* Update Patch Register */
if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266
- || viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)
- && vmode_tbl->crtc[0].crtc.hor_addr == 1024
- && vmode_tbl->crtc[0].crtc.ver_addr == 768) {
+ || viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)
+ && viafbinfo->var.xres == 1024 && viafbinfo->var.yres == 768) {
for (j = 0; j < res_patch_table[0].table_length; j++) {
index = res_patch_table[0].io_reg_table[j].index;
port = res_patch_table[0].io_reg_table[j].port;
@@ -2190,7 +1869,6 @@
}
}
- load_fix_bit_crtc_reg();
via_set_primary_pitch(viafbinfo->fix.line_length);
via_set_secondary_pitch(viafb_dual_fb ? viafbinfo1->fix.line_length
: viafbinfo->fix.line_length);
@@ -2208,23 +1886,28 @@
/* Clear On Screen */
+ if (viafb_dual_fb) {
+ var2 = viafbinfo1->var;
+ } else if (viafb_SAMM_ON) {
+ viafb_fill_var_timing_info(&var2, viafb_get_best_mode(
+ viafb_second_xres, viafb_second_yres, viafb_refresh1));
+ var2.bits_per_pixel = viafbinfo->var.bits_per_pixel;
+ }
+
/* CRT set mode */
if (viafb_CRT_ON) {
- if (viafb_SAMM_ON &&
- viaparinfo->shared->iga2_devices & VIA_CRT) {
- viafb_fill_crtc_timing(crt_timing1, vmode_tbl1,
- video_bpp1 / 8, IGA2);
- } else {
- viafb_fill_crtc_timing(crt_timing, vmode_tbl,
- video_bpp / 8,
+ if (viaparinfo->shared->iga2_devices & VIA_CRT
+ && viafb_SAMM_ON)
+ viafb_fill_crtc_timing(&var2, IGA2);
+ else
+ viafb_fill_crtc_timing(&viafbinfo->var,
(viaparinfo->shared->iga1_devices & VIA_CRT)
? IGA1 : IGA2);
- }
/* Patch if set_hres is not 8 alignment (1366) to viafb_setmode
to 8 alignment (1368),there is several pixels (2 pixels)
on right side of screen. */
- if (vmode_tbl->crtc[0].crtc.hor_addr % 8) {
+ if (viafbinfo->var.xres % 8) {
viafb_unlock_crt();
viafb_write_reg(CR02, VIACR,
viafb_read_reg(VIACR, CR02) - 1);
@@ -2233,31 +1916,20 @@
}
if (viafb_DVI_ON) {
- if (viafb_SAMM_ON &&
- (viaparinfo->tmds_setting_info->iga_path == IGA2)) {
- viafb_dvi_set_mode(viafb_get_mode
- (viaparinfo->tmds_setting_info->h_active,
- viaparinfo->tmds_setting_info->
- v_active),
- video_bpp1, viaparinfo->
- tmds_setting_info->iga_path);
- } else {
- viafb_dvi_set_mode(viafb_get_mode
- (viaparinfo->tmds_setting_info->h_active,
- viaparinfo->
- tmds_setting_info->v_active),
- video_bpp, viaparinfo->
- tmds_setting_info->iga_path);
- }
+ if (viaparinfo->shared->tmds_setting_info.iga_path == IGA2
+ && viafb_SAMM_ON)
+ viafb_dvi_set_mode(&var2, IGA2);
+ else
+ viafb_dvi_set_mode(&viafbinfo->var,
+ viaparinfo->tmds_setting_info->iga_path);
}
if (viafb_LCD_ON) {
if (viafb_SAMM_ON &&
(viaparinfo->lvds_setting_info->iga_path == IGA2)) {
viaparinfo->lvds_setting_info->bpp = video_bpp1;
- viafb_lcd_set_mode(crt_timing1, viaparinfo->
- lvds_setting_info,
- &viaparinfo->chip_info->lvds_chip_info);
+ viafb_lcd_set_mode(viaparinfo->lvds_setting_info,
+ &viaparinfo->chip_info->lvds_chip_info);
} else {
/* IGA1 doesn't have LCD scaling, so set it center. */
if (viaparinfo->lvds_setting_info->iga_path == IGA1) {
@@ -2265,18 +1937,16 @@
LCD_CENTERING;
}
viaparinfo->lvds_setting_info->bpp = video_bpp;
- viafb_lcd_set_mode(crt_timing, viaparinfo->
- lvds_setting_info,
- &viaparinfo->chip_info->lvds_chip_info);
+ viafb_lcd_set_mode(viaparinfo->lvds_setting_info,
+ &viaparinfo->chip_info->lvds_chip_info);
}
}
if (viafb_LCD2_ON) {
if (viafb_SAMM_ON &&
(viaparinfo->lvds_setting_info2->iga_path == IGA2)) {
viaparinfo->lvds_setting_info2->bpp = video_bpp1;
- viafb_lcd_set_mode(crt_timing1, viaparinfo->
- lvds_setting_info2,
- &viaparinfo->chip_info->lvds_chip_info2);
+ viafb_lcd_set_mode(viaparinfo->lvds_setting_info2,
+ &viaparinfo->chip_info->lvds_chip_info2);
} else {
/* IGA1 doesn't have LCD scaling, so set it center. */
if (viaparinfo->lvds_setting_info2->iga_path == IGA1) {
@@ -2284,9 +1954,8 @@
LCD_CENTERING;
}
viaparinfo->lvds_setting_info2->bpp = video_bpp;
- viafb_lcd_set_mode(crt_timing, viaparinfo->
- lvds_setting_info2,
- &viaparinfo->chip_info->lvds_chip_info2);
+ viafb_lcd_set_mode(viaparinfo->lvds_setting_info2,
+ &viaparinfo->chip_info->lvds_chip_info2);
}
}
@@ -2296,8 +1965,8 @@
/* If set mode normally, save resolution information for hot-plug . */
if (!viafb_hotplug) {
- viafb_hotplug_Xres = vmode_tbl->crtc[0].crtc.hor_addr;
- viafb_hotplug_Yres = vmode_tbl->crtc[0].crtc.ver_addr;
+ viafb_hotplug_Xres = viafbinfo->var.xres;
+ viafb_hotplug_Yres = viafbinfo->var.yres;
viafb_hotplug_bpp = video_bpp;
viafb_hotplug_refresh = viafb_refresh;
@@ -2348,42 +2017,14 @@
return 1;
}
-int viafb_get_pixclock(int hres, int vres, int vmode_refresh)
-{
- int i;
- struct crt_mode_table *best;
- struct VideoModeTable *vmode = viafb_get_mode(hres, vres);
-
- if (!vmode)
- return RES_640X480_60HZ_PIXCLOCK;
-
- best = &vmode->crtc[0];
- for (i = 1; i < vmode->mode_array; i++) {
- if (abs(vmode->crtc[i].refresh_rate - vmode_refresh)
- < abs(best->refresh_rate - vmode_refresh))
- best = &vmode->crtc[i];
- }
-
- return 1000000000 / (best->crtc.hor_total * best->crtc.ver_total)
- * 1000 / best->refresh_rate;
-}
-
int viafb_get_refresh(int hres, int vres, u32 long_refresh)
{
- int i;
struct crt_mode_table *best;
- struct VideoModeTable *vmode = viafb_get_mode(hres, vres);
- if (!vmode)
+ best = viafb_get_best_mode(hres, vres, long_refresh);
+ if (!best)
return 60;
- best = &vmode->crtc[0];
- for (i = 1; i < vmode->mode_array; i++) {
- if (abs(vmode->crtc[i].refresh_rate - long_refresh)
- < abs(best->refresh_rate - long_refresh))
- best = &vmode->crtc[i];
- }
-
if (abs(best->refresh_rate - long_refresh) > 3) {
if (hres == 1200 && vres == 900)
return 49; /* OLPC DCON only supports 50 Hz */
@@ -2485,21 +2126,14 @@
}
/*According var's xres, yres fill var's other timing information*/
-void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
- struct VideoModeTable *vmode_tbl)
+void viafb_fill_var_timing_info(struct fb_var_screeninfo *var,
+ struct crt_mode_table *mode)
{
- struct crt_mode_table *crt_timing = NULL;
struct display_timing crt_reg;
- int i = 0, index = 0;
- crt_timing = vmode_tbl->crtc;
- for (i = 0; i < vmode_tbl->mode_array; i++) {
- index = i;
- if (crt_timing[i].refresh_rate == refresh)
- break;
- }
- crt_reg = crt_timing[index].crtc;
- var->pixclock = viafb_get_pixclock(var->xres, var->yres, refresh);
+ crt_reg = mode->crtc;
+ var->pixclock = 1000000000 / (crt_reg.hor_total * crt_reg.ver_total)
+ * 1000 / mode->refresh_rate;
var->left_margin =
crt_reg.hor_total - (crt_reg.hor_sync_start + crt_reg.hor_sync_end);
var->right_margin = crt_reg.hor_sync_start - crt_reg.hor_addr;
@@ -2509,8 +2143,8 @@
var->lower_margin = crt_reg.ver_sync_start - crt_reg.ver_addr;
var->vsync_len = crt_reg.ver_sync_end;
var->sync = 0;
- if (crt_timing[index].h_sync_polarity == POSITIVE)
+ if (mode->h_sync_polarity == POSITIVE)
var->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (crt_timing[index].v_sync_polarity == POSITIVE)
+ if (mode->v_sync_polarity == POSITIVE)
var->sync |= FB_SYNC_VERT_HIGH_ACT;
}
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index c7239eb..4db5b6e 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -51,40 +51,6 @@
#define VIA_HSYNC_NEGATIVE 0x01
#define VIA_VSYNC_NEGATIVE 0x02
-/***************************************************
-* Definition IGA1 Design Method of CRTC Registers *
-****************************************************/
-#define IGA1_HOR_TOTAL_FORMULA(x) (((x)/8)-5)
-#define IGA1_HOR_ADDR_FORMULA(x) (((x)/8)-1)
-#define IGA1_HOR_BLANK_START_FORMULA(x) (((x)/8)-1)
-#define IGA1_HOR_BLANK_END_FORMULA(x, y) (((x+y)/8)-1)
-#define IGA1_HOR_SYNC_START_FORMULA(x) ((x)/8)
-#define IGA1_HOR_SYNC_END_FORMULA(x, y) ((x+y)/8)
-
-#define IGA1_VER_TOTAL_FORMULA(x) ((x)-2)
-#define IGA1_VER_ADDR_FORMULA(x) ((x)-1)
-#define IGA1_VER_BLANK_START_FORMULA(x) ((x)-1)
-#define IGA1_VER_BLANK_END_FORMULA(x, y) ((x+y)-1)
-#define IGA1_VER_SYNC_START_FORMULA(x) ((x)-1)
-#define IGA1_VER_SYNC_END_FORMULA(x, y) ((x+y)-1)
-
-/***************************************************
-** Definition IGA2 Design Method of CRTC Registers *
-****************************************************/
-#define IGA2_HOR_TOTAL_FORMULA(x) ((x)-1)
-#define IGA2_HOR_ADDR_FORMULA(x) ((x)-1)
-#define IGA2_HOR_BLANK_START_FORMULA(x) ((x)-1)
-#define IGA2_HOR_BLANK_END_FORMULA(x, y) ((x+y)-1)
-#define IGA2_HOR_SYNC_START_FORMULA(x) ((x)-1)
-#define IGA2_HOR_SYNC_END_FORMULA(x, y) ((x+y)-1)
-
-#define IGA2_VER_TOTAL_FORMULA(x) ((x)-1)
-#define IGA2_VER_ADDR_FORMULA(x) ((x)-1)
-#define IGA2_VER_BLANK_START_FORMULA(x) ((x)-1)
-#define IGA2_VER_BLANK_END_FORMULA(x, y) ((x+y)-1)
-#define IGA2_VER_SYNC_START_FORMULA(x) ((x)-1)
-#define IGA2_VER_SYNC_END_FORMULA(x, y) ((x+y)-1)
-
/**********************************************************/
/* Definition IGA2 Design Method of CRTC Shadow Registers */
/**********************************************************/
@@ -97,33 +63,6 @@
#define IGA2_VER_SYNC_START_SHADOW_FORMULA(x) (x)
#define IGA2_VER_SYNC_END_SHADOW_FORMULA(x, y) (x+y)
-/* Define Register Number for IGA1 CRTC Timing */
-
-/* location: {CR00,0,7},{CR36,3,3} */
-#define IGA1_HOR_TOTAL_REG_NUM 2
-/* location: {CR01,0,7} */
-#define IGA1_HOR_ADDR_REG_NUM 1
-/* location: {CR02,0,7} */
-#define IGA1_HOR_BLANK_START_REG_NUM 1
-/* location: {CR03,0,4},{CR05,7,7},{CR33,5,5} */
-#define IGA1_HOR_BLANK_END_REG_NUM 3
-/* location: {CR04,0,7},{CR33,4,4} */
-#define IGA1_HOR_SYNC_START_REG_NUM 2
-/* location: {CR05,0,4} */
-#define IGA1_HOR_SYNC_END_REG_NUM 1
-/* location: {CR06,0,7},{CR07,0,0},{CR07,5,5},{CR35,0,0} */
-#define IGA1_VER_TOTAL_REG_NUM 4
-/* location: {CR12,0,7},{CR07,1,1},{CR07,6,6},{CR35,2,2} */
-#define IGA1_VER_ADDR_REG_NUM 4
-/* location: {CR15,0,7},{CR07,3,3},{CR09,5,5},{CR35,3,3} */
-#define IGA1_VER_BLANK_START_REG_NUM 4
-/* location: {CR16,0,7} */
-#define IGA1_VER_BLANK_END_REG_NUM 1
-/* location: {CR10,0,7},{CR07,2,2},{CR07,7,7},{CR35,1,1} */
-#define IGA1_VER_SYNC_START_REG_NUM 4
-/* location: {CR11,0,3} */
-#define IGA1_VER_SYNC_END_REG_NUM 1
-
/* Define Register Number for IGA2 Shadow CRTC Timing */
/* location: {CR6D,0,7},{CR71,3,3} */
@@ -143,37 +82,6 @@
/* location: {CR76,0,3} */
#define IGA2_SHADOW_VER_SYNC_END_REG_NUM 1
-/* Define Register Number for IGA2 CRTC Timing */
-
-/* location: {CR50,0,7},{CR55,0,3} */
-#define IGA2_HOR_TOTAL_REG_NUM 2
-/* location: {CR51,0,7},{CR55,4,6} */
-#define IGA2_HOR_ADDR_REG_NUM 2
-/* location: {CR52,0,7},{CR54,0,2} */
-#define IGA2_HOR_BLANK_START_REG_NUM 2
-/* location: CLE266: {CR53,0,7},{CR54,3,5} => CLE266's CR5D[6]
-is reserved, so it may have problem to set 1600x1200 on IGA2. */
-/* Others: {CR53,0,7},{CR54,3,5},{CR5D,6,6} */
-#define IGA2_HOR_BLANK_END_REG_NUM 3
-/* location: {CR56,0,7},{CR54,6,7},{CR5C,7,7} */
-/* VT3314 and Later: {CR56,0,7},{CR54,6,7},{CR5C,7,7}, {CR5D,7,7} */
-#define IGA2_HOR_SYNC_START_REG_NUM 4
-
-/* location: {CR57,0,7},{CR5C,6,6} */
-#define IGA2_HOR_SYNC_END_REG_NUM 2
-/* location: {CR58,0,7},{CR5D,0,2} */
-#define IGA2_VER_TOTAL_REG_NUM 2
-/* location: {CR59,0,7},{CR5D,3,5} */
-#define IGA2_VER_ADDR_REG_NUM 2
-/* location: {CR5A,0,7},{CR5C,0,2} */
-#define IGA2_VER_BLANK_START_REG_NUM 2
-/* location: {CR5E,0,7},{CR5C,3,5} */
-#define IGA2_VER_BLANK_END_REG_NUM 2
-/* location: {CR5E,0,7},{CR5F,5,7} */
-#define IGA2_VER_SYNC_START_REG_NUM 2
-/* location: {CR5F,0,4} */
-#define IGA2_VER_SYNC_END_REG_NUM 1
-
/* Define Fetch Count Register*/
/* location: {SR1C,0,7},{SR1D,0,1} */
@@ -446,87 +354,12 @@
/* location: {CR78,0,7},{CR79,6,7} */
#define LCD_VER_SCALING_FACTOR_REG_NUM_CLE 2
-/************************************************
- ***** Define IGA1 Display Timing *****
- ************************************************/
struct io_register {
u8 io_addr;
u8 start_bit;
u8 end_bit;
};
-/* IGA1 Horizontal Total */
-struct iga1_hor_total {
- int reg_num;
- struct io_register reg[IGA1_HOR_TOTAL_REG_NUM];
-};
-
-/* IGA1 Horizontal Addressable Video */
-struct iga1_hor_addr {
- int reg_num;
- struct io_register reg[IGA1_HOR_ADDR_REG_NUM];
-};
-
-/* IGA1 Horizontal Blank Start */
-struct iga1_hor_blank_start {
- int reg_num;
- struct io_register reg[IGA1_HOR_BLANK_START_REG_NUM];
-};
-
-/* IGA1 Horizontal Blank End */
-struct iga1_hor_blank_end {
- int reg_num;
- struct io_register reg[IGA1_HOR_BLANK_END_REG_NUM];
-};
-
-/* IGA1 Horizontal Sync Start */
-struct iga1_hor_sync_start {
- int reg_num;
- struct io_register reg[IGA1_HOR_SYNC_START_REG_NUM];
-};
-
-/* IGA1 Horizontal Sync End */
-struct iga1_hor_sync_end {
- int reg_num;
- struct io_register reg[IGA1_HOR_SYNC_END_REG_NUM];
-};
-
-/* IGA1 Vertical Total */
-struct iga1_ver_total {
- int reg_num;
- struct io_register reg[IGA1_VER_TOTAL_REG_NUM];
-};
-
-/* IGA1 Vertical Addressable Video */
-struct iga1_ver_addr {
- int reg_num;
- struct io_register reg[IGA1_VER_ADDR_REG_NUM];
-};
-
-/* IGA1 Vertical Blank Start */
-struct iga1_ver_blank_start {
- int reg_num;
- struct io_register reg[IGA1_VER_BLANK_START_REG_NUM];
-};
-
-/* IGA1 Vertical Blank End */
-struct iga1_ver_blank_end {
- int reg_num;
- struct io_register reg[IGA1_VER_BLANK_END_REG_NUM];
-};
-
-/* IGA1 Vertical Sync Start */
-struct iga1_ver_sync_start {
- int reg_num;
- struct io_register reg[IGA1_VER_SYNC_START_REG_NUM];
-};
-
-/* IGA1 Vertical Sync End */
-struct iga1_ver_sync_end {
- int reg_num;
- struct io_register reg[IGA1_VER_SYNC_END_REG_NUM];
-};
-
/*****************************************************
** Define IGA2 Shadow Display Timing ****
*****************************************************/
@@ -579,82 +412,6 @@
struct io_register reg[IGA2_SHADOW_VER_SYNC_END_REG_NUM];
};
-/*****************************************************
-** Define IGA2 Display Timing ****
-******************************************************/
-
-/* IGA2 Horizontal Total */
-struct iga2_hor_total {
- int reg_num;
- struct io_register reg[IGA2_HOR_TOTAL_REG_NUM];
-};
-
-/* IGA2 Horizontal Addressable Video */
-struct iga2_hor_addr {
- int reg_num;
- struct io_register reg[IGA2_HOR_ADDR_REG_NUM];
-};
-
-/* IGA2 Horizontal Blank Start */
-struct iga2_hor_blank_start {
- int reg_num;
- struct io_register reg[IGA2_HOR_BLANK_START_REG_NUM];
-};
-
-/* IGA2 Horizontal Blank End */
-struct iga2_hor_blank_end {
- int reg_num;
- struct io_register reg[IGA2_HOR_BLANK_END_REG_NUM];
-};
-
-/* IGA2 Horizontal Sync Start */
-struct iga2_hor_sync_start {
- int reg_num;
- struct io_register reg[IGA2_HOR_SYNC_START_REG_NUM];
-};
-
-/* IGA2 Horizontal Sync End */
-struct iga2_hor_sync_end {
- int reg_num;
- struct io_register reg[IGA2_HOR_SYNC_END_REG_NUM];
-};
-
-/* IGA2 Vertical Total */
-struct iga2_ver_total {
- int reg_num;
- struct io_register reg[IGA2_VER_TOTAL_REG_NUM];
-};
-
-/* IGA2 Vertical Addressable Video */
-struct iga2_ver_addr {
- int reg_num;
- struct io_register reg[IGA2_VER_ADDR_REG_NUM];
-};
-
-/* IGA2 Vertical Blank Start */
-struct iga2_ver_blank_start {
- int reg_num;
- struct io_register reg[IGA2_VER_BLANK_START_REG_NUM];
-};
-
-/* IGA2 Vertical Blank End */
-struct iga2_ver_blank_end {
- int reg_num;
- struct io_register reg[IGA2_VER_BLANK_END_REG_NUM];
-};
-
-/* IGA2 Vertical Sync Start */
-struct iga2_ver_sync_start {
- int reg_num;
- struct io_register reg[IGA2_VER_SYNC_START_REG_NUM];
-};
-
-/* IGA2 Vertical Sync End */
-struct iga2_ver_sync_end {
- int reg_num;
- struct io_register reg[IGA2_VER_SYNC_END_REG_NUM];
-};
-
/* IGA1 Fetch Count Register */
struct iga1_fetch_count {
int reg_num;
@@ -817,21 +574,6 @@
iga2_display_queue_expire_num_reg;
};
-struct iga1_crtc_timing {
- struct iga1_hor_total hor_total;
- struct iga1_hor_addr hor_addr;
- struct iga1_hor_blank_start hor_blank_start;
- struct iga1_hor_blank_end hor_blank_end;
- struct iga1_hor_sync_start hor_sync_start;
- struct iga1_hor_sync_end hor_sync_end;
- struct iga1_ver_total ver_total;
- struct iga1_ver_addr ver_addr;
- struct iga1_ver_blank_start ver_blank_start;
- struct iga1_ver_blank_end ver_blank_end;
- struct iga1_ver_sync_start ver_sync_start;
- struct iga1_ver_sync_end ver_sync_end;
-};
-
struct iga2_shadow_crtc_timing {
struct iga2_shadow_hor_total hor_total_shadow;
struct iga2_shadow_hor_blank_end hor_blank_end_shadow;
@@ -843,21 +585,6 @@
struct iga2_shadow_ver_sync_end ver_sync_end_shadow;
};
-struct iga2_crtc_timing {
- struct iga2_hor_total hor_total;
- struct iga2_hor_addr hor_addr;
- struct iga2_hor_blank_start hor_blank_start;
- struct iga2_hor_blank_end hor_blank_end;
- struct iga2_hor_sync_start hor_sync_start;
- struct iga2_hor_sync_end hor_sync_end;
- struct iga2_ver_total ver_total;
- struct iga2_ver_addr ver_addr;
- struct iga2_ver_blank_start ver_blank_start;
- struct iga2_ver_blank_end ver_blank_end;
- struct iga2_ver_sync_start ver_sync_start;
- struct iga2_ver_sync_end ver_sync_end;
-};
-
/* device ID */
#define CLE266_FUNCTION3 0x3123
#define KM400_FUNCTION3 0x3205
@@ -910,9 +637,7 @@
extern int viafb_DVI_ON;
extern int viafb_hotplug;
-void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
- struct VideoModeTable *video_mode, int bpp_byte, int set_iga);
-
+void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var, int iga);
void viafb_set_vclock(u32 CLK, int set_iga);
void viafb_load_reg(int timing_value, int viafb_load_reg_num,
struct io_register *reg,
@@ -932,13 +657,11 @@
void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
*p_gfx_dpa_setting);
-int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
- struct VideoModeTable *vmode_tbl1, int video_bpp1);
-void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
- struct VideoModeTable *vmode_tbl);
+int viafb_setmode(int video_bpp, int video_bpp1);
+void viafb_fill_var_timing_info(struct fb_var_screeninfo *var,
+ struct crt_mode_table *mode);
void __devinit viafb_init_chip_info(int chip_type);
void __devinit viafb_init_dac(int set_iga);
-int viafb_get_pixclock(int hres, int vres, int vmode_refresh);
int viafb_get_refresh(int hres, int vres, u32 float_refresh);
void viafb_update_device_setting(int hres, int vres, int bpp, int flag);
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 6e06981..5f3b4e3 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -548,9 +548,8 @@
}
/* LCD Set Mode */
-void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
- struct lvds_setting_information *plvds_setting_info,
- struct lvds_chip_information *plvds_chip_info)
+void viafb_lcd_set_mode(struct lvds_setting_information *plvds_setting_info,
+ struct lvds_chip_information *plvds_chip_info)
{
int set_iga = plvds_setting_info->iga_path;
int mode_bpp = plvds_setting_info->bpp;
@@ -559,16 +558,15 @@
int panel_hres = plvds_setting_info->lcd_panel_hres;
int panel_vres = plvds_setting_info->lcd_panel_vres;
u32 clock;
- struct display_timing mode_crt_reg, panel_crt_reg;
- struct crt_mode_table *panel_crt_table = NULL;
- struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres,
- panel_vres);
+ struct display_timing mode_crt_reg, panel_crt_reg, timing;
+ struct crt_mode_table *mode_crt_table, *panel_crt_table;
DEBUG_MSG(KERN_INFO "viafb_lcd_set_mode!!\n");
/* Get mode table */
+ mode_crt_table = viafb_get_best_mode(set_hres, set_vres, 60);
mode_crt_reg = mode_crt_table->crtc;
/* Get panel table Pointer */
- panel_crt_table = vmode_tbl->crtc;
+ panel_crt_table = viafb_get_best_mode(panel_hres, panel_vres, 60);
panel_crt_reg = panel_crt_table->crtc;
DEBUG_MSG(KERN_INFO "bellow viafb_lcd_set_mode!!\n");
if (VT1636_LVDS == plvds_chip_info->lvds_chip_name)
@@ -576,31 +574,28 @@
clock = panel_crt_reg.hor_total * panel_crt_reg.ver_total
* panel_crt_table->refresh_rate;
plvds_setting_info->vclk = clock;
- if (set_iga == IGA1) {
- /* IGA1 doesn't have LCD scaling, so set it as centering. */
- viafb_load_crtc_timing(lcd_centering_timging
- (mode_crt_reg, panel_crt_reg), IGA1);
+
+ if (set_iga == IGA2 && (set_hres < panel_hres || set_vres < panel_vres)
+ && plvds_setting_info->display_method == LCD_EXPANDSION) {
+ timing = panel_crt_reg;
+ load_lcd_scaling(set_hres, set_vres, panel_hres, panel_vres);
} else {
- /* Expansion */
- if (plvds_setting_info->display_method == LCD_EXPANDSION
- && (set_hres < panel_hres || set_vres < panel_vres)) {
- /* expansion timing IGA2 loaded panel set timing*/
- viafb_load_crtc_timing(panel_crt_reg, IGA2);
- DEBUG_MSG(KERN_INFO "viafb_load_crtc_timing!!\n");
- load_lcd_scaling(set_hres, set_vres, panel_hres,
- panel_vres);
- DEBUG_MSG(KERN_INFO "load_lcd_scaling!!\n");
- } else { /* Centering */
- /* centering timing IGA2 always loaded panel
- and mode releative timing */
- viafb_load_crtc_timing(lcd_centering_timging
- (mode_crt_reg, panel_crt_reg), IGA2);
- viafb_write_reg_mask(CR79, VIACR, 0x00,
+ timing = lcd_centering_timging(mode_crt_reg, panel_crt_reg);
+ if (set_iga == IGA2)
+ /* disable scaling */
+ via_write_reg_mask(VIACR, 0x79, 0x00,
BIT0 + BIT1 + BIT2);
- /* LCD scaling disabled */
- }
}
+ timing.hor_blank_end += timing.hor_blank_start;
+ timing.hor_sync_end += timing.hor_sync_start;
+ timing.ver_blank_end += timing.ver_blank_start;
+ timing.ver_sync_end += timing.ver_sync_start;
+ if (set_iga == IGA1)
+ via_set_primary_timing(&timing);
+ else if (set_iga == IGA2)
+ via_set_secondary_timing(&timing);
+
/* Fetch count for IGA2 only */
viafb_load_fetch_count_reg(set_hres, mode_bpp / 8, set_iga);
diff --git a/drivers/video/via/lcd.h b/drivers/video/via/lcd.h
index 75f60a6..77ca7b8 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/via/lcd.h
@@ -76,16 +76,13 @@
*plvds_chip_info,
struct lvds_setting_information
*plvds_setting_info);
-void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
- struct lvds_setting_information *plvds_setting_info,
- struct lvds_chip_information *plvds_chip_info);
+void viafb_lcd_set_mode(struct lvds_setting_information *plvds_setting_info,
+ struct lvds_chip_information *plvds_chip_info);
bool __devinit viafb_lvds_trasmitter_identify(void);
void viafb_init_lvds_output_interface(struct lvds_chip_information
*plvds_chip_info,
struct lvds_setting_information
*plvds_setting_info);
bool viafb_lcd_get_mobile_state(bool *mobile);
-void viafb_load_crtc_timing(struct display_timing device_timing,
- int set_iga);
#endif /* __LCD_H__ */
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 61b0bd5..69d882c 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -22,6 +22,8 @@
#ifndef __SHARE_H__
#define __SHARE_H__
+#include "via_modesetting.h"
+
/* Define Bit Field */
#define BIT0 0x01
#define BIT1 0x02
@@ -634,10 +636,6 @@
#define V_SYNC_SATRT_SHADOW_INDEX 18
#define V_SYNC_END_SHADOW_INDEX 19
-/* Definition Video Mode Pixel Clock (picoseconds)
-*/
-#define RES_640X480_60HZ_PIXCLOCK 39722
-
/* LCD display method
*/
#define LCD_EXPANDSION 0x00
@@ -648,23 +646,6 @@
#define LCD_OPENLDI 0x00
#define LCD_SPWG 0x01
-/* Define display timing
-*/
-struct display_timing {
- u16 hor_total;
- u16 hor_addr;
- u16 hor_blank_start;
- u16 hor_blank_end;
- u16 hor_sync_start;
- u16 hor_sync_end;
- u16 ver_total;
- u16 ver_addr;
- u16 ver_blank_start;
- u16 ver_blank_end;
- u16 ver_sync_start;
- u16 ver_sync_end;
-};
-
struct crt_mode_table {
int refresh_rate;
int h_sync_polarity;
diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
index eb112b6..dd58b53 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/via/via-core.c
@@ -35,7 +35,7 @@
* The OLPC XO-1.5 puts the camera power and reset lines onto
* GPIO 2C.
*/
-static const struct via_port_cfg olpc_adap_configs[] = {
+static struct via_port_cfg olpc_adap_configs[] = {
[VIA_PORT_26] = { VIA_PORT_I2C, VIA_MODE_I2C, VIASR, 0x26 },
[VIA_PORT_31] = { VIA_PORT_I2C, VIA_MODE_I2C, VIASR, 0x31 },
[VIA_PORT_25] = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 },
diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/via/via_modesetting.c
index 3cddcff..0e431ae 100644
--- a/drivers/video/via/via_modesetting.c
+++ b/drivers/video/via/via_modesetting.c
@@ -29,6 +29,110 @@
#include "share.h"
#include "debug.h"
+
+void via_set_primary_timing(const struct display_timing *timing)
+{
+ struct display_timing raw;
+
+ raw.hor_total = timing->hor_total / 8 - 5;
+ raw.hor_addr = timing->hor_addr / 8 - 1;
+ raw.hor_blank_start = timing->hor_blank_start / 8 - 1;
+ raw.hor_blank_end = timing->hor_blank_end / 8 - 1;
+ raw.hor_sync_start = timing->hor_sync_start / 8;
+ raw.hor_sync_end = timing->hor_sync_end / 8;
+ raw.ver_total = timing->ver_total - 2;
+ raw.ver_addr = timing->ver_addr - 1;
+ raw.ver_blank_start = timing->ver_blank_start - 1;
+ raw.ver_blank_end = timing->ver_blank_end - 1;
+ raw.ver_sync_start = timing->ver_sync_start - 1;
+ raw.ver_sync_end = timing->ver_sync_end - 1;
+
+ /* unlock timing registers */
+ via_write_reg_mask(VIACR, 0x11, 0x00, 0x80);
+
+ via_write_reg(VIACR, 0x00, raw.hor_total & 0xFF);
+ via_write_reg(VIACR, 0x01, raw.hor_addr & 0xFF);
+ via_write_reg(VIACR, 0x02, raw.hor_blank_start & 0xFF);
+ via_write_reg_mask(VIACR, 0x03, raw.hor_blank_end & 0x1F, 0x1F);
+ via_write_reg(VIACR, 0x04, raw.hor_sync_start & 0xFF);
+ via_write_reg_mask(VIACR, 0x05, (raw.hor_sync_end & 0x1F)
+ | (raw.hor_blank_end << (7 - 5) & 0x80), 0x9F);
+ via_write_reg(VIACR, 0x06, raw.ver_total & 0xFF);
+ via_write_reg_mask(VIACR, 0x07, (raw.ver_total >> 8 & 0x01)
+ | (raw.ver_addr >> (8 - 1) & 0x02)
+ | (raw.ver_sync_start >> (8 - 2) & 0x04)
+ | (raw.ver_blank_start >> (8 - 3) & 0x08)
+ | (raw.ver_total >> (9 - 5) & 0x20)
+ | (raw.ver_addr >> (9 - 6) & 0x40)
+ | (raw.ver_sync_start >> (9 - 7) & 0x80), 0xEF);
+ via_write_reg_mask(VIACR, 0x09, raw.ver_blank_start >> (9 - 5) & 0x20,
+ 0x20);
+ via_write_reg(VIACR, 0x10, raw.ver_sync_start & 0xFF);
+ via_write_reg_mask(VIACR, 0x11, raw.ver_sync_end & 0x0F, 0x0F);
+ via_write_reg(VIACR, 0x12, raw.ver_addr & 0xFF);
+ via_write_reg(VIACR, 0x15, raw.ver_blank_start & 0xFF);
+ via_write_reg(VIACR, 0x16, raw.ver_blank_end & 0xFF);
+ via_write_reg_mask(VIACR, 0x33, (raw.hor_sync_start >> (8 - 4) & 0x10)
+ | (raw.hor_blank_end >> (6 - 5) & 0x20), 0x30);
+ via_write_reg_mask(VIACR, 0x35, (raw.ver_total >> 10 & 0x01)
+ | (raw.ver_sync_start >> (10 - 1) & 0x02)
+ | (raw.ver_addr >> (10 - 2) & 0x04)
+ | (raw.ver_blank_start >> (10 - 3) & 0x08), 0x0F);
+ via_write_reg_mask(VIACR, 0x36, raw.hor_total >> (8 - 3) & 0x08, 0x08);
+
+ /* lock timing registers */
+ via_write_reg_mask(VIACR, 0x11, 0x80, 0x80);
+
+ /* reset timing control */
+ via_write_reg_mask(VIACR, 0x17, 0x00, 0x80);
+ via_write_reg_mask(VIACR, 0x17, 0x80, 0x80);
+}
+
+void via_set_secondary_timing(const struct display_timing *timing)
+{
+ struct display_timing raw;
+
+ raw.hor_total = timing->hor_total - 1;
+ raw.hor_addr = timing->hor_addr - 1;
+ raw.hor_blank_start = timing->hor_blank_start - 1;
+ raw.hor_blank_end = timing->hor_blank_end - 1;
+ raw.hor_sync_start = timing->hor_sync_start - 1;
+ raw.hor_sync_end = timing->hor_sync_end - 1;
+ raw.ver_total = timing->ver_total - 1;
+ raw.ver_addr = timing->ver_addr - 1;
+ raw.ver_blank_start = timing->ver_blank_start - 1;
+ raw.ver_blank_end = timing->ver_blank_end - 1;
+ raw.ver_sync_start = timing->ver_sync_start - 1;
+ raw.ver_sync_end = timing->ver_sync_end - 1;
+
+ via_write_reg(VIACR, 0x50, raw.hor_total & 0xFF);
+ via_write_reg(VIACR, 0x51, raw.hor_addr & 0xFF);
+ via_write_reg(VIACR, 0x52, raw.hor_blank_start & 0xFF);
+ via_write_reg(VIACR, 0x53, raw.hor_blank_end & 0xFF);
+ via_write_reg(VIACR, 0x54, (raw.hor_blank_start >> 8 & 0x07)
+ | (raw.hor_blank_end >> (8 - 3) & 0x38)
+ | (raw.hor_sync_start >> (8 - 6) & 0xC0));
+ via_write_reg_mask(VIACR, 0x55, (raw.hor_total >> 8 & 0x0F)
+ | (raw.hor_addr >> (8 - 4) & 0x70), 0x7F);
+ via_write_reg(VIACR, 0x56, raw.hor_sync_start & 0xFF);
+ via_write_reg(VIACR, 0x57, raw.hor_sync_end & 0xFF);
+ via_write_reg(VIACR, 0x58, raw.ver_total & 0xFF);
+ via_write_reg(VIACR, 0x59, raw.ver_addr & 0xFF);
+ via_write_reg(VIACR, 0x5A, raw.ver_blank_start & 0xFF);
+ via_write_reg(VIACR, 0x5B, raw.ver_blank_end & 0xFF);
+ via_write_reg(VIACR, 0x5C, (raw.ver_blank_start >> 8 & 0x07)
+ | (raw.ver_blank_end >> (8 - 3) & 0x38)
+ | (raw.hor_sync_end >> (8 - 6) & 0x40)
+ | (raw.hor_sync_start >> (10 - 7) & 0x80));
+ via_write_reg(VIACR, 0x5D, (raw.ver_total >> 8 & 0x07)
+ | (raw.ver_addr >> (8 - 3) & 0x38)
+ | (raw.hor_blank_end >> (11 - 6) & 0x40)
+ | (raw.hor_sync_start >> (11 - 7) & 0x80));
+ via_write_reg(VIACR, 0x5E, raw.ver_sync_start & 0xFF);
+ via_write_reg(VIACR, 0x5F, (raw.ver_sync_end & 0x1F)
+ | (raw.ver_sync_start >> (8 - 5) & 0xE0));
+}
+
void via_set_primary_address(u32 addr)
{
DEBUG_MSG(KERN_DEBUG "via_set_primary_address(0x%08X)\n", addr);
diff --git a/drivers/video/via/via_modesetting.h b/drivers/video/via/via_modesetting.h
index ae35cfd..06e09fe 100644
--- a/drivers/video/via/via_modesetting.h
+++ b/drivers/video/via/via_modesetting.h
@@ -28,6 +28,29 @@
#include <linux/types.h>
+
+#define VIA_PITCH_SIZE (1<<3)
+#define VIA_PITCH_MAX 0x3FF8
+
+
+struct display_timing {
+ u16 hor_total;
+ u16 hor_addr;
+ u16 hor_blank_start;
+ u16 hor_blank_end;
+ u16 hor_sync_start;
+ u16 hor_sync_end;
+ u16 ver_total;
+ u16 ver_addr;
+ u16 ver_blank_start;
+ u16 ver_blank_end;
+ u16 ver_sync_start;
+ u16 ver_sync_end;
+};
+
+
+void via_set_primary_timing(const struct display_timing *timing);
+void via_set_secondary_timing(const struct display_timing *timing);
void via_set_primary_address(u32 addr);
void via_set_secondary_address(u32 addr);
void via_set_primary_pitch(u32 pitch);
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 53aa443..a13c258 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -38,8 +38,6 @@
static int viafb_bpp = 32;
static int viafb_bpp1 = 32;
-static unsigned int viafb_second_xres = 640;
-static unsigned int viafb_second_yres = 480;
static unsigned int viafb_second_offset;
static int viafb_second_size;
@@ -151,7 +149,8 @@
info->fix.visual =
bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
- info->fix.line_length = (info->var.xres_virtual * bpp / 8 + 7) & ~7;
+ info->fix.line_length = ALIGN(info->var.xres_virtual * bpp / 8,
+ VIA_PITCH_SIZE);
}
static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
@@ -200,7 +199,6 @@
struct fb_info *info)
{
int depth, refresh;
- struct VideoModeTable *vmode_entry;
struct viafb_par *ppar = info->par;
u32 line;
@@ -210,8 +208,10 @@
if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
return -EINVAL;
- vmode_entry = viafb_get_mode(var->xres, var->yres);
- if (!vmode_entry) {
+ /* the refresh rate is not important here, as we only want to know
+ * whether the resolution exists
+ */
+ if (!viafb_get_best_mode(var->xres, var->yres, 60)) {
DEBUG_MSG(KERN_INFO
"viafb: Mode %dx%dx%d not supported!!\n",
var->xres, var->yres, var->bits_per_pixel);
@@ -238,8 +238,12 @@
depth = 24;
viafb_fill_var_color_info(var, depth);
- line = (var->xres_virtual * var->bits_per_pixel / 8 + 7) & ~7;
- if (line * var->yres_virtual > ppar->memsize)
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+
+ line = ALIGN(var->xres_virtual * var->bits_per_pixel / 8,
+ VIA_PITCH_SIZE);
+ if (line > VIA_PITCH_MAX || line * var->yres_virtual > ppar->memsize)
return -EINVAL;
/* Based on var passed in to calculate the refresh,
@@ -249,7 +253,8 @@
get_var_refresh(var));
/* Adjust var according to our driver's own table */
- viafb_fill_var_timing_info(var, refresh, vmode_entry);
+ viafb_fill_var_timing_info(var,
+ viafb_get_best_mode(var->xres, var->yres, refresh));
if (var->accel_flags & FB_ACCELF_TEXT &&
!ppar->shared->vdev->engine_mmio)
var->accel_flags = 0;
@@ -260,7 +265,6 @@
static int viafb_set_par(struct fb_info *info)
{
struct viafb_par *viapar = info->par;
- struct VideoModeTable *vmode_entry, *vmode_entry1 = NULL;
int refresh;
DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
@@ -269,10 +273,7 @@
viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres,
viafbinfo->var.bits_per_pixel, 0);
- vmode_entry = viafb_get_mode(viafbinfo->var.xres, viafbinfo->var.yres);
if (viafb_dual_fb) {
- vmode_entry1 = viafb_get_mode(viafbinfo1->var.xres,
- viafbinfo1->var.yres);
viafb_update_device_setting(viafbinfo1->var.xres,
viafbinfo1->var.yres, viafbinfo1->var.bits_per_pixel,
1);
@@ -280,8 +281,6 @@
DEBUG_MSG(KERN_INFO
"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
viafb_second_xres, viafb_second_yres, viafb_bpp1);
- vmode_entry1 = viafb_get_mode(viafb_second_xres,
- viafb_second_yres);
viafb_update_device_setting(viafb_second_xres,
viafb_second_yres, viafb_bpp1, 1);
@@ -289,7 +288,8 @@
refresh = viafb_get_refresh(info->var.xres, info->var.yres,
get_var_refresh(&info->var));
- if (vmode_entry) {
+ if (viafb_get_best_mode(viafbinfo->var.xres, viafbinfo->var.yres,
+ refresh)) {
if (viafb_dual_fb && viapar->iga_path == IGA2) {
viafb_bpp1 = info->var.bits_per_pixel;
viafb_refresh1 = refresh;
@@ -302,8 +302,7 @@
info->flags &= ~FBINFO_HWACCEL_DISABLED;
else
info->flags |= FBINFO_HWACCEL_DISABLED;
- viafb_setmode(vmode_entry, info->var.bits_per_pixel,
- vmode_entry1, viafb_bpp1);
+ viafb_setmode(info->var.bits_per_pixel, viafb_bpp1);
viafb_pan_display(&info->var, info);
}
@@ -348,8 +347,9 @@
struct fb_info *info)
{
struct viafb_par *viapar = info->par;
- u32 vram_addr = (var->yoffset * var->xres_virtual + var->xoffset)
- * (var->bits_per_pixel / 8) + viapar->vram_addr;
+ u32 vram_addr = viapar->vram_addr
+ + var->yoffset * info->fix.line_length
+ + var->xoffset * info->var.bits_per_pixel / 8;
DEBUG_MSG(KERN_DEBUG "viafb_pan_display, address = %d\n", vram_addr);
if (!viafb_dual_fb) {
@@ -1158,7 +1158,8 @@
for (i = 0; i < 3; i++) {
value = strsep(&pbuf, " ");
if (value != NULL) {
- strict_strtoul(value, 0, (unsigned long *)®_val);
+ if (kstrtou8(value, 0, ®_val) < 0)
+ return -EINVAL;
DEBUG_MSG(KERN_INFO "DVP0:reg_val[%l]=:%x\n", i,
reg_val);
switch (i) {
@@ -1228,7 +1229,8 @@
for (i = 0; i < 3; i++) {
value = strsep(&pbuf, " ");
if (value != NULL) {
- strict_strtoul(value, 0, (unsigned long *)®_val);
+ if (kstrtou8(value, 0, ®_val) < 0)
+ return -EINVAL;
switch (i) {
case 0:
viafb_write_reg_mask(CR9B, VIACR,
@@ -1286,7 +1288,8 @@
if (copy_from_user(&buf[0], buffer, length))
return -EFAULT;
buf[length - 1] = '\0'; /*Ensure end string */
- strict_strtoul(&buf[0], 0, (unsigned long *)®_val);
+ if (kstrtou8(buf, 0, ®_val) < 0)
+ return -EINVAL;
viafb_write_reg_mask(CR97, VIACR, reg_val, 0x0f);
return count;
}
@@ -1325,7 +1328,8 @@
if (copy_from_user(&buf[0], buffer, length))
return -EFAULT;
buf[length - 1] = '\0'; /*Ensure end string */
- strict_strtoul(&buf[0], 0, (unsigned long *)®_val);
+ if (kstrtou8(buf, 0, ®_val) < 0)
+ return -EINVAL;
viafb_write_reg_mask(CR99, VIACR, reg_val, 0x0f);
return count;
}
@@ -1394,8 +1398,8 @@
for (i = 0; i < 2; i++) {
value = strsep(&pbuf, " ");
if (value != NULL) {
- strict_strtoul(value, 0,
- (unsigned long *)®_val.Data);
+ if (kstrtou8(value, 0, ®_val.Data) < 0)
+ return -EINVAL;
switch (i) {
case 0:
reg_val.Index = 0x08;
@@ -1431,8 +1435,8 @@
for (i = 0; i < 2; i++) {
value = strsep(&pbuf, " ");
if (value != NULL) {
- strict_strtoul(value, 0,
- (unsigned long *)®_val.Data);
+ if (kstrtou8(value, 0, ®_val.Data) < 0)
+ return -EINVAL;
switch (i) {
case 0:
reg_val.Index = 0x08;
@@ -1729,7 +1733,6 @@
int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
{
u32 default_xres, default_yres;
- struct VideoModeTable *vmode_entry;
struct fb_var_screeninfo default_var;
int rc;
u32 viafb_par_length;
@@ -1802,7 +1805,6 @@
}
parse_mode(viafb_mode, &default_xres, &default_yres);
- vmode_entry = viafb_get_mode(default_xres, default_yres);
if (viafb_SAMM_ON == 1)
parse_mode(viafb_mode1, &viafb_second_xres,
&viafb_second_yres);
@@ -1812,9 +1814,8 @@
default_var.xres_virtual = default_xres;
default_var.yres_virtual = default_yres;
default_var.bits_per_pixel = viafb_bpp;
- viafb_fill_var_timing_info(&default_var, viafb_get_refresh(
- default_var.xres, default_var.yres, viafb_refresh),
- viafb_get_mode(default_var.xres, default_var.yres));
+ viafb_fill_var_timing_info(&default_var, viafb_get_best_mode(
+ default_var.xres, default_var.yres, viafb_refresh));
viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
viafbinfo->var = default_var;
@@ -1853,9 +1854,8 @@
default_var.xres_virtual = viafb_second_xres;
default_var.yres_virtual = viafb_second_yres;
default_var.bits_per_pixel = viafb_bpp1;
- viafb_fill_var_timing_info(&default_var, viafb_get_refresh(
- default_var.xres, default_var.yres, viafb_refresh1),
- viafb_get_mode(default_var.xres, default_var.yres));
+ viafb_fill_var_timing_info(&default_var, viafb_get_best_mode(
+ default_var.xres, default_var.yres, viafb_refresh1));
viafb_setup_fixinfo(&viafbinfo1->fix, viaparinfo1);
viafb_check_var(&default_var, viafbinfo1);
@@ -1950,61 +1950,67 @@
if (!*this_opt)
continue;
- if (!strncmp(this_opt, "viafb_mode1=", 12))
+ if (!strncmp(this_opt, "viafb_mode1=", 12)) {
viafb_mode1 = kstrdup(this_opt + 12, GFP_KERNEL);
- else if (!strncmp(this_opt, "viafb_mode=", 11))
+ } else if (!strncmp(this_opt, "viafb_mode=", 11)) {
viafb_mode = kstrdup(this_opt + 11, GFP_KERNEL);
- else if (!strncmp(this_opt, "viafb_bpp1=", 11))
- strict_strtoul(this_opt + 11, 0,
- (unsigned long *)&viafb_bpp1);
- else if (!strncmp(this_opt, "viafb_bpp=", 10))
- strict_strtoul(this_opt + 10, 0,
- (unsigned long *)&viafb_bpp);
- else if (!strncmp(this_opt, "viafb_refresh1=", 15))
- strict_strtoul(this_opt + 15, 0,
- (unsigned long *)&viafb_refresh1);
- else if (!strncmp(this_opt, "viafb_refresh=", 14))
- strict_strtoul(this_opt + 14, 0,
- (unsigned long *)&viafb_refresh);
- else if (!strncmp(this_opt, "viafb_lcd_dsp_method=", 21))
- strict_strtoul(this_opt + 21, 0,
- (unsigned long *)&viafb_lcd_dsp_method);
- else if (!strncmp(this_opt, "viafb_lcd_panel_id=", 19))
- strict_strtoul(this_opt + 19, 0,
- (unsigned long *)&viafb_lcd_panel_id);
- else if (!strncmp(this_opt, "viafb_accel=", 12))
- strict_strtoul(this_opt + 12, 0,
- (unsigned long *)&viafb_accel);
- else if (!strncmp(this_opt, "viafb_SAMM_ON=", 14))
- strict_strtoul(this_opt + 14, 0,
- (unsigned long *)&viafb_SAMM_ON);
- else if (!strncmp(this_opt, "viafb_active_dev=", 17))
+ } else if (!strncmp(this_opt, "viafb_bpp1=", 11)) {
+ if (kstrtouint(this_opt + 11, 0, &viafb_bpp1) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_bpp=", 10)) {
+ if (kstrtouint(this_opt + 10, 0, &viafb_bpp) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_refresh1=", 15)) {
+ if (kstrtoint(this_opt + 15, 0, &viafb_refresh1) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_refresh=", 14)) {
+ if (kstrtoint(this_opt + 14, 0, &viafb_refresh) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_lcd_dsp_method=", 21)) {
+ if (kstrtoint(this_opt + 21, 0,
+ &viafb_lcd_dsp_method) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_lcd_panel_id=", 19)) {
+ if (kstrtoint(this_opt + 19, 0,
+ &viafb_lcd_panel_id) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_accel=", 12)) {
+ if (kstrtoint(this_opt + 12, 0, &viafb_accel) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_SAMM_ON=", 14)) {
+ if (kstrtoint(this_opt + 14, 0, &viafb_SAMM_ON) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_active_dev=", 17)) {
viafb_active_dev = kstrdup(this_opt + 17, GFP_KERNEL);
- else if (!strncmp(this_opt,
- "viafb_display_hardware_layout=", 30))
- strict_strtoul(this_opt + 30, 0,
- (unsigned long *)&viafb_display_hardware_layout);
- else if (!strncmp(this_opt, "viafb_second_size=", 18))
- strict_strtoul(this_opt + 18, 0,
- (unsigned long *)&viafb_second_size);
- else if (!strncmp(this_opt,
- "viafb_platform_epia_dvi=", 24))
- strict_strtoul(this_opt + 24, 0,
- (unsigned long *)&viafb_platform_epia_dvi);
- else if (!strncmp(this_opt,
- "viafb_device_lcd_dualedge=", 26))
- strict_strtoul(this_opt + 26, 0,
- (unsigned long *)&viafb_device_lcd_dualedge);
- else if (!strncmp(this_opt, "viafb_bus_width=", 16))
- strict_strtoul(this_opt + 16, 0,
- (unsigned long *)&viafb_bus_width);
- else if (!strncmp(this_opt, "viafb_lcd_mode=", 15))
- strict_strtoul(this_opt + 15, 0,
- (unsigned long *)&viafb_lcd_mode);
- else if (!strncmp(this_opt, "viafb_lcd_port=", 15))
+ } else if (!strncmp(this_opt,
+ "viafb_display_hardware_layout=", 30)) {
+ if (kstrtoint(this_opt + 30, 0,
+ &viafb_display_hardware_layout) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_second_size=", 18)) {
+ if (kstrtoint(this_opt + 18, 0, &viafb_second_size) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt,
+ "viafb_platform_epia_dvi=", 24)) {
+ if (kstrtoint(this_opt + 24, 0,
+ &viafb_platform_epia_dvi) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt,
+ "viafb_device_lcd_dualedge=", 26)) {
+ if (kstrtoint(this_opt + 26, 0,
+ &viafb_device_lcd_dualedge) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_bus_width=", 16)) {
+ if (kstrtoint(this_opt + 16, 0, &viafb_bus_width) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_lcd_mode=", 15)) {
+ if (kstrtoint(this_opt + 15, 0, &viafb_lcd_mode) < 0)
+ return -EINVAL;
+ } else if (!strncmp(this_opt, "viafb_lcd_port=", 15)) {
viafb_lcd_port = kstrdup(this_opt + 15, GFP_KERNEL);
- else if (!strncmp(this_opt, "viafb_dvi_port=", 15))
+ } else if (!strncmp(this_opt, "viafb_dvi_port=", 15)) {
viafb_dvi_port = kstrdup(this_opt + 15, GFP_KERNEL);
+ }
}
return 0;
}
@@ -2028,9 +2034,9 @@
return r;
#endif
if (parse_mode(viafb_mode, &dummy_x, &dummy_y)
- || !viafb_get_mode(dummy_x, dummy_y)
+ || !viafb_get_best_mode(dummy_x, dummy_y, viafb_refresh)
|| parse_mode(viafb_mode1, &dummy_x, &dummy_y)
- || !viafb_get_mode(dummy_x, dummy_y)
+ || !viafb_get_best_mode(dummy_x, dummy_y, viafb_refresh1)
|| viafb_bpp < 0 || viafb_bpp > 32
|| viafb_bpp1 < 0 || viafb_bpp1 > 32
|| parse_active_dev())
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index 58df74e..0911cac 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -281,7 +281,7 @@
/*r_rate,hsp,vsp */
/*HT, HA, HBS, HBE, HSS, HSE, VT, VA, VBS, VBE, VSS, VSE */
{REFRESH_60, M640X480_R60_HSP, M640X480_R60_VSP,
- {800, 640, 648, 144, 656, 96, 525, 480, 480, 45, 490, 2} },
+ {800, 640, 640, 160, 656, 96, 525, 480, 480, 45, 490, 2} },
{REFRESH_75, M640X480_R75_HSP, M640X480_R75_VSP,
{840, 640, 640, 200, 656, 64, 500, 480, 480, 20, 481, 3} },
{REFRESH_85, M640X480_R85_HSP, M640X480_R85_VSP,
@@ -863,26 +863,56 @@
int NUM_TOTAL_PATCH_MODE = ARRAY_SIZE(res_patch_table);
-struct VideoModeTable *viafb_get_mode(int hres, int vres)
+static struct VideoModeTable *get_modes(struct VideoModeTable *vmt, int n,
+ int hres, int vres)
{
- u32 i;
- for (i = 0; i < ARRAY_SIZE(viafb_modes); i++)
- if (viafb_modes[i].mode_array &&
- viafb_modes[i].crtc[0].crtc.hor_addr == hres &&
- viafb_modes[i].crtc[0].crtc.ver_addr == vres)
+ int i;
+
+ for (i = 0; i < n; i++)
+ if (vmt[i].mode_array &&
+ vmt[i].crtc[0].crtc.hor_addr == hres &&
+ vmt[i].crtc[0].crtc.ver_addr == vres)
return &viafb_modes[i];
return NULL;
}
-struct VideoModeTable *viafb_get_rb_mode(int hres, int vres)
+static struct crt_mode_table *get_best_mode(struct VideoModeTable *vmt,
+ int refresh)
{
- u32 i;
- for (i = 0; i < ARRAY_SIZE(viafb_rb_modes); i++)
- if (viafb_rb_modes[i].mode_array &&
- viafb_rb_modes[i].crtc[0].crtc.hor_addr == hres &&
- viafb_rb_modes[i].crtc[0].crtc.ver_addr == vres)
- return &viafb_rb_modes[i];
+ struct crt_mode_table *best;
+ int i;
- return NULL;
+ if (!vmt)
+ return NULL;
+
+ best = &vmt->crtc[0];
+ for (i = 1; i < vmt->mode_array; i++) {
+ if (abs(vmt->crtc[i].refresh_rate - refresh)
+ < abs(best->refresh_rate - refresh))
+ best = &vmt->crtc[i];
+ }
+
+ return best;
+}
+
+static struct VideoModeTable *viafb_get_mode(int hres, int vres)
+{
+ return get_modes(viafb_modes, ARRAY_SIZE(viafb_modes), hres, vres);
+}
+
+struct crt_mode_table *viafb_get_best_mode(int hres, int vres, int refresh)
+{
+ return get_best_mode(viafb_get_mode(hres, vres), refresh);
+}
+
+static struct VideoModeTable *viafb_get_rb_mode(int hres, int vres)
+{
+ return get_modes(viafb_rb_modes, ARRAY_SIZE(viafb_rb_modes), hres,
+ vres);
+}
+
+struct crt_mode_table *viafb_get_best_rb_mode(int hres, int vres, int refresh)
+{
+ return get_best_mode(viafb_get_rb_mode(hres, vres), refresh);
}
diff --git a/drivers/video/via/viamode.h b/drivers/video/via/viamode.h
index 3751289..5917a2b 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/via/viamode.h
@@ -60,7 +60,7 @@
extern struct patch_table res_patch_table[];
extern struct VPITTable VPIT;
-struct VideoModeTable *viafb_get_mode(int hres, int vres);
-struct VideoModeTable *viafb_get_rb_mode(int hres, int vres);
+struct crt_mode_table *viafb_get_best_mode(int hres, int vres, int refresh);
+struct crt_mode_table *viafb_get_best_rb_mode(int hres, int vres, int refresh);
#endif /* __VIAMODE_H__ */
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index 0e120d6..777c21d 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -210,8 +210,8 @@
struct vt8500lcd_info *fbi = to_vt8500lcd_info(info);
writel((1 << 31)
- | (((var->xres_virtual - var->xres) * pixlen / 4) << 20)
- | (off >> 2), fbi->regbase + 0x20);
+ | (((info->var.xres_virtual - info->var.xres) * pixlen / 4) << 20)
+ | (off >> 2), fbi->regbase + 0x20);
return 0;
}
@@ -355,7 +355,7 @@
goto failed_free_palette;
}
- ret = request_irq(irq, vt8500lcd_handle_irq, IRQF_DISABLED, "LCD", fbi);
+ ret = request_irq(irq, vt8500lcd_handle_irq, 0, "LCD", fbi);
if (ret) {
dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
ret = -EBUSY;
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index f9b3e3d..4e74d26 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -620,13 +620,14 @@
unsigned int offset;
/* Calculate the offset */
- if (var->bits_per_pixel == 0) {
- offset = (var->yoffset / 16) * var->xres_virtual + var->xoffset;
+ if (info->var.bits_per_pixel == 0) {
+ offset = (var->yoffset / 16) * info->var.xres_virtual
+ + var->xoffset;
offset = offset >> 3;
} else {
offset = (var->yoffset * info->fix.line_length) +
- (var->xoffset * var->bits_per_pixel / 8);
- offset = offset >> ((var->bits_per_pixel == 4) ? 2 : 1);
+ (var->xoffset * info->var.bits_per_pixel / 8);
+ offset = offset >> ((info->var.bits_per_pixel == 4) ? 2 : 1);
}
/* Set the offset */
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 77dea01..fcb6cd9 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 57e493b..816ed08 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -35,4 +35,15 @@
If unsure, say M.
+ config VIRTIO_MMIO
+ tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select VIRTIO
+ select VIRTIO_RING
+ ---help---
+ This drivers provides support for memory mapped virtio
+ platform device driver.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index 6738c44..5a4c63cf 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_VIRTIO) += virtio.o
obj-$(CONFIG_VIRTIO_RING) += virtio_ring.o
+obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
new file mode 100644
index 0000000..acc5e43
--- /dev/null
+++ b/drivers/virtio/virtio_mmio.c
@@ -0,0 +1,479 @@
+/*
+ * Virtio memory mapped device driver
+ *
+ * Copyright 2011, ARM Ltd.
+ *
+ * This module allows virtio devices to be used over a virtual, memory mapped
+ * platform device.
+ *
+ * Registers layout (all 32-bit wide):
+ *
+ * offset d. name description
+ * ------ -- ---------------- -----------------
+ *
+ * 0x000 R MagicValue Magic value "virt"
+ * 0x004 R Version Device version (current max. 1)
+ * 0x008 R DeviceID Virtio device ID
+ * 0x00c R VendorID Virtio vendor ID
+ *
+ * 0x010 R HostFeatures Features supported by the host
+ * 0x014 W HostFeaturesSel Set of host features to access via HostFeatures
+ *
+ * 0x020 W GuestFeatures Features activated by the guest
+ * 0x024 W GuestFeaturesSel Set of activated features to set via GuestFeatures
+ * 0x028 W GuestPageSize Size of guest's memory page in bytes
+ *
+ * 0x030 W QueueSel Queue selector
+ * 0x034 R QueueNumMax Maximum size of the currently selected queue
+ * 0x038 W QueueNum Queue size for the currently selected queue
+ * 0x03c W QueueAlign Used Ring alignment for the current queue
+ * 0x040 RW QueuePFN PFN for the currently selected queue
+ *
+ * 0x050 W QueueNotify Queue notifier
+ * 0x060 R InterruptStatus Interrupt status register
+ * 0x060 W InterruptACK Interrupt acknowledge register
+ * 0x070 RW Status Device status register
+ *
+ * 0x100+ RW Device-specific configuration space
+ *
+ * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_mmio.h>
+#include <linux/virtio_ring.h>
+
+
+
+/* The alignment to use between consumer and producer parts of vring.
+ * Currently hardcoded to the page size. */
+#define VIRTIO_MMIO_VRING_ALIGN PAGE_SIZE
+
+
+
+#define to_virtio_mmio_device(_plat_dev) \
+ container_of(_plat_dev, struct virtio_mmio_device, vdev)
+
+struct virtio_mmio_device {
+ struct virtio_device vdev;
+ struct platform_device *pdev;
+
+ void __iomem *base;
+ unsigned long version;
+
+ /* a list of queues so we can dispatch IRQs */
+ spinlock_t lock;
+ struct list_head virtqueues;
+};
+
+struct virtio_mmio_vq_info {
+ /* the actual virtqueue */
+ struct virtqueue *vq;
+
+ /* the number of entries in the queue */
+ unsigned int num;
+
+ /* the index of the queue */
+ int queue_index;
+
+ /* the virtual address of the ring queue */
+ void *queue;
+
+ /* the list node for the virtqueues list */
+ struct list_head node;
+};
+
+
+
+/* Configuration interface */
+
+static u32 vm_get_features(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ /* TODO: Features > 32 bits */
+ writel(0, vm_dev->base + VIRTIO_MMIO_HOST_FEATURES_SEL);
+
+ return readl(vm_dev->base + VIRTIO_MMIO_HOST_FEATURES);
+}
+
+static void vm_finalize_features(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ int i;
+
+ /* Give virtio_ring a chance to accept features. */
+ vring_transport_features(vdev);
+
+ for (i = 0; i < ARRAY_SIZE(vdev->features); i++) {
+ writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SET);
+ writel(vdev->features[i],
+ vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES);
+ }
+}
+
+static void vm_get(struct virtio_device *vdev, unsigned offset,
+ void *buf, unsigned len)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ u8 *ptr = buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ ptr[i] = readb(vm_dev->base + VIRTIO_MMIO_CONFIG + offset + i);
+}
+
+static void vm_set(struct virtio_device *vdev, unsigned offset,
+ const void *buf, unsigned len)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ const u8 *ptr = buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ writeb(ptr[i], vm_dev->base + VIRTIO_MMIO_CONFIG + offset + i);
+}
+
+static u8 vm_get_status(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ return readl(vm_dev->base + VIRTIO_MMIO_STATUS) & 0xff;
+}
+
+static void vm_set_status(struct virtio_device *vdev, u8 status)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ /* We should never be setting status to 0. */
+ BUG_ON(status == 0);
+
+ writel(status, vm_dev->base + VIRTIO_MMIO_STATUS);
+}
+
+static void vm_reset(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ /* 0 status means a reset. */
+ writel(0, vm_dev->base + VIRTIO_MMIO_STATUS);
+}
+
+
+
+/* Transport interface */
+
+/* the notify function used when creating a virt queue */
+static void vm_notify(struct virtqueue *vq)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev);
+ struct virtio_mmio_vq_info *info = vq->priv;
+
+ /* We write the queue's selector into the notification register to
+ * signal the other end */
+ writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY);
+}
+
+/* Notify all virtqueues on an interrupt. */
+static irqreturn_t vm_interrupt(int irq, void *opaque)
+{
+ struct virtio_mmio_device *vm_dev = opaque;
+ struct virtio_mmio_vq_info *info;
+ struct virtio_driver *vdrv = container_of(vm_dev->vdev.dev.driver,
+ struct virtio_driver, driver);
+ unsigned long status;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* Read and acknowledge interrupts */
+ status = readl(vm_dev->base + VIRTIO_MMIO_INTERRUPT_STATUS);
+ writel(status, vm_dev->base + VIRTIO_MMIO_INTERRUPT_ACK);
+
+ if (unlikely(status & VIRTIO_MMIO_INT_CONFIG)
+ && vdrv && vdrv->config_changed) {
+ vdrv->config_changed(&vm_dev->vdev);
+ ret = IRQ_HANDLED;
+ }
+
+ if (likely(status & VIRTIO_MMIO_INT_VRING)) {
+ spin_lock_irqsave(&vm_dev->lock, flags);
+ list_for_each_entry(info, &vm_dev->virtqueues, node)
+ ret |= vring_interrupt(irq, info->vq);
+ spin_unlock_irqrestore(&vm_dev->lock, flags);
+ }
+
+ return ret;
+}
+
+
+
+static void vm_del_vq(struct virtqueue *vq)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev);
+ struct virtio_mmio_vq_info *info = vq->priv;
+ unsigned long flags, size;
+
+ spin_lock_irqsave(&vm_dev->lock, flags);
+ list_del(&info->node);
+ spin_unlock_irqrestore(&vm_dev->lock, flags);
+
+ vring_del_virtqueue(vq);
+
+ /* Select and deactivate the queue */
+ writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
+ writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
+
+ size = PAGE_ALIGN(vring_size(info->num, VIRTIO_MMIO_VRING_ALIGN));
+ free_pages_exact(info->queue, size);
+ kfree(info);
+}
+
+static void vm_del_vqs(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ struct virtqueue *vq, *n;
+
+ list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+ vm_del_vq(vq);
+
+ free_irq(platform_get_irq(vm_dev->pdev, 0), vm_dev);
+}
+
+
+
+static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index,
+ void (*callback)(struct virtqueue *vq),
+ const char *name)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ struct virtio_mmio_vq_info *info;
+ struct virtqueue *vq;
+ unsigned long flags, size;
+ int err;
+
+ /* Select the queue we're interested in */
+ writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
+
+ /* Queue shouldn't already be set up. */
+ if (readl(vm_dev->base + VIRTIO_MMIO_QUEUE_PFN)) {
+ err = -ENOENT;
+ goto error_available;
+ }
+
+ /* Allocate and fill out our active queue description */
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ err = -ENOMEM;
+ goto error_kmalloc;
+ }
+ info->queue_index = index;
+
+ /* Allocate pages for the queue - start with a queue as big as
+ * possible (limited by maximum size allowed by device), drop down
+ * to a minimal size, just big enough to fit descriptor table
+ * and two rings (which makes it "alignment_size * 2")
+ */
+ info->num = readl(vm_dev->base + VIRTIO_MMIO_QUEUE_NUM_MAX);
+ while (1) {
+ size = PAGE_ALIGN(vring_size(info->num,
+ VIRTIO_MMIO_VRING_ALIGN));
+ /* Already smallest possible allocation? */
+ if (size <= VIRTIO_MMIO_VRING_ALIGN * 2) {
+ err = -ENOMEM;
+ goto error_alloc_pages;
+ }
+
+ info->queue = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
+ if (info->queue)
+ break;
+
+ info->num /= 2;
+ }
+
+ /* Activate the queue */
+ writel(info->num, vm_dev->base + VIRTIO_MMIO_QUEUE_NUM);
+ writel(VIRTIO_MMIO_VRING_ALIGN,
+ vm_dev->base + VIRTIO_MMIO_QUEUE_ALIGN);
+ writel(virt_to_phys(info->queue) >> PAGE_SHIFT,
+ vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
+
+ /* Create the vring */
+ vq = vring_new_virtqueue(info->num, VIRTIO_MMIO_VRING_ALIGN,
+ vdev, info->queue, vm_notify, callback, name);
+ if (!vq) {
+ err = -ENOMEM;
+ goto error_new_virtqueue;
+ }
+
+ vq->priv = info;
+ info->vq = vq;
+
+ spin_lock_irqsave(&vm_dev->lock, flags);
+ list_add(&info->node, &vm_dev->virtqueues);
+ spin_unlock_irqrestore(&vm_dev->lock, flags);
+
+ return vq;
+
+error_new_virtqueue:
+ writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
+ free_pages_exact(info->queue, size);
+error_alloc_pages:
+ kfree(info);
+error_kmalloc:
+error_available:
+ return ERR_PTR(err);
+}
+
+static int vm_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[])
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ unsigned int irq = platform_get_irq(vm_dev->pdev, 0);
+ int i, err;
+
+ err = request_irq(irq, vm_interrupt, IRQF_SHARED,
+ dev_name(&vdev->dev), vm_dev);
+ if (err)
+ return err;
+
+ for (i = 0; i < nvqs; ++i) {
+ vqs[i] = vm_setup_vq(vdev, i, callbacks[i], names[i]);
+ if (IS_ERR(vqs[i])) {
+ vm_del_vqs(vdev);
+ return PTR_ERR(vqs[i]);
+ }
+ }
+
+ return 0;
+}
+
+
+
+static struct virtio_config_ops virtio_mmio_config_ops = {
+ .get = vm_get,
+ .set = vm_set,
+ .get_status = vm_get_status,
+ .set_status = vm_set_status,
+ .reset = vm_reset,
+ .find_vqs = vm_find_vqs,
+ .del_vqs = vm_del_vqs,
+ .get_features = vm_get_features,
+ .finalize_features = vm_finalize_features,
+};
+
+
+
+/* Platform device */
+
+static int __devinit virtio_mmio_probe(struct platform_device *pdev)
+{
+ struct virtio_mmio_device *vm_dev;
+ struct resource *mem;
+ unsigned long magic;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -EINVAL;
+
+ if (!devm_request_mem_region(&pdev->dev, mem->start,
+ resource_size(mem), pdev->name))
+ return -EBUSY;
+
+ vm_dev = devm_kzalloc(&pdev->dev, sizeof(*vm_dev), GFP_KERNEL);
+ if (!vm_dev)
+ return -ENOMEM;
+
+ vm_dev->vdev.dev.parent = &pdev->dev;
+ vm_dev->vdev.config = &virtio_mmio_config_ops;
+ vm_dev->pdev = pdev;
+ INIT_LIST_HEAD(&vm_dev->virtqueues);
+ spin_lock_init(&vm_dev->lock);
+
+ vm_dev->base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
+ if (vm_dev->base == NULL)
+ return -EFAULT;
+
+ /* Check magic value */
+ magic = readl(vm_dev->base + VIRTIO_MMIO_MAGIC_VALUE);
+ if (memcmp(&magic, "virt", 4) != 0) {
+ dev_warn(&pdev->dev, "Wrong magic value 0x%08lx!\n", magic);
+ return -ENODEV;
+ }
+
+ /* Check device version */
+ vm_dev->version = readl(vm_dev->base + VIRTIO_MMIO_VERSION);
+ if (vm_dev->version != 1) {
+ dev_err(&pdev->dev, "Version %ld not supported!\n",
+ vm_dev->version);
+ return -ENXIO;
+ }
+
+ vm_dev->vdev.id.device = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_ID);
+ vm_dev->vdev.id.vendor = readl(vm_dev->base + VIRTIO_MMIO_VENDOR_ID);
+
+ writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
+
+ platform_set_drvdata(pdev, vm_dev);
+
+ return register_virtio_device(&vm_dev->vdev);
+}
+
+static int __devexit virtio_mmio_remove(struct platform_device *pdev)
+{
+ struct virtio_mmio_device *vm_dev = platform_get_drvdata(pdev);
+
+ unregister_virtio_device(&vm_dev->vdev);
+
+ return 0;
+}
+
+
+
+/* Platform driver */
+
+static struct of_device_id virtio_mmio_match[] = {
+ { .compatible = "virtio,mmio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, virtio_mmio_match);
+
+static struct platform_driver virtio_mmio_driver = {
+ .probe = virtio_mmio_probe,
+ .remove = __devexit_p(virtio_mmio_remove),
+ .driver = {
+ .name = "virtio-mmio",
+ .owner = THIS_MODULE,
+ .of_match_table = virtio_mmio_match,
+ },
+};
+
+static int __init virtio_mmio_init(void)
+{
+ return platform_driver_register(&virtio_mmio_driver);
+}
+
+static void __exit virtio_mmio_exit(void)
+{
+ platform_driver_unregister(&virtio_mmio_driver);
+}
+
+module_init(virtio_mmio_init);
+module_exit(virtio_mmio_exit);
+
+MODULE_AUTHOR("Pawel Moll <pawel.moll@arm.com>");
+MODULE_DESCRIPTION("Platform bus driver for memory mapped virtio devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 4bcc8b8..79a31e5 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -415,9 +415,13 @@
}
}
- spin_lock_irqsave(&vp_dev->lock, flags);
- list_add(&info->node, &vp_dev->virtqueues);
- spin_unlock_irqrestore(&vp_dev->lock, flags);
+ if (callback) {
+ spin_lock_irqsave(&vp_dev->lock, flags);
+ list_add(&info->node, &vp_dev->virtqueues);
+ spin_unlock_irqrestore(&vp_dev->lock, flags);
+ } else {
+ INIT_LIST_HEAD(&info->node);
+ }
return vq;
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
index 483d451..5754c9a 100644
--- a/drivers/w1/slaves/w1_ds2760.c
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -114,43 +114,7 @@
.read = w1_ds2760_read_bin,
};
-static DEFINE_IDR(bat_idr);
-static DEFINE_MUTEX(bat_idr_lock);
-
-static int new_bat_id(void)
-{
- int ret;
-
- while (1) {
- int id;
-
- ret = idr_pre_get(&bat_idr, GFP_KERNEL);
- if (ret == 0)
- return -ENOMEM;
-
- mutex_lock(&bat_idr_lock);
- ret = idr_get_new(&bat_idr, NULL, &id);
- mutex_unlock(&bat_idr_lock);
-
- if (ret == 0) {
- ret = id & MAX_ID_MASK;
- break;
- } else if (ret == -EAGAIN) {
- continue;
- } else {
- break;
- }
- }
-
- return ret;
-}
-
-static void release_bat_id(int id)
-{
- mutex_lock(&bat_idr_lock);
- idr_remove(&bat_idr, id);
- mutex_unlock(&bat_idr_lock);
-}
+static DEFINE_IDA(bat_ida);
static int w1_ds2760_add_slave(struct w1_slave *sl)
{
@@ -158,7 +122,7 @@
int id;
struct platform_device *pdev;
- id = new_bat_id();
+ id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
ret = id;
goto noid;
@@ -187,7 +151,7 @@
pdev_add_failed:
platform_device_unregister(pdev);
pdev_alloc_failed:
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
noid:
success:
return ret;
@@ -199,7 +163,7 @@
int id = pdev->id;
platform_device_unregister(pdev);
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
}
@@ -217,14 +181,14 @@
{
printk(KERN_INFO "1-Wire driver for the DS2760 battery monitor "
" chip - (c) 2004-2005, Szabolcs Gyurko\n");
- idr_init(&bat_idr);
+ ida_init(&bat_ida);
return w1_register_family(&w1_ds2760_family);
}
static void __exit w1_ds2760_exit(void)
{
w1_unregister_family(&w1_ds2760_family);
- idr_destroy(&bat_idr);
+ ida_destroy(&bat_ida);
}
EXPORT_SYMBOL(w1_ds2760_read);
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
index 274c8f3..39f78c0 100644
--- a/drivers/w1/slaves/w1_ds2780.c
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -26,20 +26,14 @@
#include "../w1_family.h"
#include "w1_ds2780.h"
-int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
- int io)
+static int w1_ds2780_do_io(struct device *dev, char *buf, int addr,
+ size_t count, int io)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
- if (!dev)
- return -ENODEV;
+ if (addr > DS2780_DATA_SIZE || addr < 0)
+ return 0;
- mutex_lock(&sl->master->mutex);
-
- if (addr > DS2780_DATA_SIZE || addr < 0) {
- count = 0;
- goto out;
- }
count = min_t(int, count, DS2780_DATA_SIZE - addr);
if (w1_reset_select_slave(sl) == 0) {
@@ -47,7 +41,6 @@
w1_write_8(sl->master, W1_DS2780_WRITE_DATA);
w1_write_8(sl->master, addr);
w1_write_block(sl->master, buf, count);
- /* XXX w1_write_block returns void, not n_written */
} else {
w1_write_8(sl->master, W1_DS2780_READ_DATA);
w1_write_8(sl->master, addr);
@@ -55,13 +48,42 @@
}
}
-out:
- mutex_unlock(&sl->master->mutex);
-
return count;
}
+
+int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&sl->master->mutex);
+
+ ret = w1_ds2780_do_io(dev, buf, addr, count, io);
+
+ mutex_unlock(&sl->master->mutex);
+
+ return ret;
+}
EXPORT_SYMBOL(w1_ds2780_io);
+int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ ret = w1_ds2780_do_io(dev, buf, addr, count, io);
+
+ return ret;
+}
+EXPORT_SYMBOL(w1_ds2780_io_nolock);
+
int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
@@ -99,43 +121,7 @@
.read = w1_ds2780_read_bin,
};
-static DEFINE_IDR(bat_idr);
-static DEFINE_MUTEX(bat_idr_lock);
-
-static int new_bat_id(void)
-{
- int ret;
-
- while (1) {
- int id;
-
- ret = idr_pre_get(&bat_idr, GFP_KERNEL);
- if (ret == 0)
- return -ENOMEM;
-
- mutex_lock(&bat_idr_lock);
- ret = idr_get_new(&bat_idr, NULL, &id);
- mutex_unlock(&bat_idr_lock);
-
- if (ret == 0) {
- ret = id & MAX_ID_MASK;
- break;
- } else if (ret == -EAGAIN) {
- continue;
- } else {
- break;
- }
- }
-
- return ret;
-}
-
-static void release_bat_id(int id)
-{
- mutex_lock(&bat_idr_lock);
- idr_remove(&bat_idr, id);
- mutex_unlock(&bat_idr_lock);
-}
+static DEFINE_IDA(bat_ida);
static int w1_ds2780_add_slave(struct w1_slave *sl)
{
@@ -143,7 +129,7 @@
int id;
struct platform_device *pdev;
- id = new_bat_id();
+ id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
ret = id;
goto noid;
@@ -172,7 +158,7 @@
pdev_add_failed:
platform_device_unregister(pdev);
pdev_alloc_failed:
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
noid:
return ret;
}
@@ -183,7 +169,7 @@
int id = pdev->id;
platform_device_unregister(pdev);
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr);
}
@@ -199,14 +185,14 @@
static int __init w1_ds2780_init(void)
{
- idr_init(&bat_idr);
+ ida_init(&bat_ida);
return w1_register_family(&w1_ds2780_family);
}
static void __exit w1_ds2780_exit(void)
{
w1_unregister_family(&w1_ds2780_family);
- idr_destroy(&bat_idr);
+ ida_destroy(&bat_ida);
}
module_init(w1_ds2780_init);
diff --git a/drivers/w1/slaves/w1_ds2780.h b/drivers/w1/slaves/w1_ds2780.h
index a1fba79..7373793 100644
--- a/drivers/w1/slaves/w1_ds2780.h
+++ b/drivers/w1/slaves/w1_ds2780.h
@@ -124,6 +124,8 @@
extern int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
int io);
+extern int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr,
+ size_t count, int io);
extern int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd);
#endif /* !_W1_DS2780_H */
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index d220bce..f79e62e54 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -78,6 +78,7 @@
memcpy(&dev->dev, device, sizeof(struct device));
dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
snprintf(dev->name, sizeof(dev->name), "w1_bus_master%u", dev->id);
+ dev->dev.init_name = dev->name;
dev->driver = driver;
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 765b37b..3135b2c 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -158,13 +158,18 @@
static u8 w1_read_bit(struct w1_master *dev)
{
int result;
+ unsigned long flags;
+ /* sample timing is critical here */
+ local_irq_save(flags);
dev->bus_master->write_bit(dev->bus_master->data, 0);
w1_delay(6);
dev->bus_master->write_bit(dev->bus_master->data, 1);
w1_delay(9);
result = dev->bus_master->read_bit(dev->bus_master->data);
+ local_irq_restore(flags);
+
w1_delay(55);
return result & 0x1;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 86b0735..64c6752 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -726,7 +726,7 @@
config SBC7240_WDT
tristate "SBC Nano 7240 Watchdog Timer"
- depends on X86_32
+ depends on X86_32 && !UML
---help---
This is the driver for the hardware watchdog found on the IEI
single board computers EPIC Nano 7240 (and likely others). This
@@ -1174,6 +1174,10 @@
by Xen 4.0 and newer. The watchdog timeout period is normally one
minute but can be changed with a boot-time parameter.
+config UML_WATCHDOG
+ tristate "UML watchdog"
+ depends on UML
+
#
# ISA-based Watchdog Cards
#
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index b5a1076..879ed88 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1138,7 +1138,7 @@
struct v9fs_session_info *v9ses = sb->s_fs_info;
struct v9fs_inode *v9inode = V9FS_I(inode);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_atime.tv_sec = stat->atime;
inode->i_mtime.tv_sec = stat->mtime;
@@ -1164,7 +1164,7 @@
/* HARDLINKCOUNT %u */
sscanf(ext, "%13s %u", tag_name, &i_nlink);
if (!strncmp(tag_name, "HARDLINKCOUNT", 13))
- inode->i_nlink = i_nlink;
+ set_nlink(inode, i_nlink);
}
}
mode = stat->mode & S_IALLUGO;
diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c
index aded79f..0b5745e 100644
--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -606,7 +606,7 @@
inode->i_ctime.tv_nsec = stat->st_ctime_nsec;
inode->i_uid = stat->st_uid;
inode->i_gid = stat->st_gid;
- inode->i_nlink = stat->st_nlink;
+ set_nlink(inode, stat->st_nlink);
mode = stat->st_mode & S_IALLUGO;
mode |= inode->i_mode & ~S_IALLUGO;
@@ -632,7 +632,7 @@
if (stat->st_result_mask & P9_STATS_GID)
inode->i_gid = stat->st_gid;
if (stat->st_result_mask & P9_STATS_NLINK)
- inode->i_nlink = stat->st_nlink;
+ set_nlink(inode, stat->st_nlink);
if (stat->st_result_mask & P9_STATS_MODE) {
inode->i_mode = stat->st_mode;
if ((S_ISBLK(inode->i_mode)) ||
diff --git a/fs/Kconfig b/fs/Kconfig
index 9fe0b34..5f4c45d 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -109,7 +109,7 @@
source "fs/sysfs/Kconfig"
config TMPFS
- bool "Virtual memory file system support (former shm fs)"
+ bool "Tmpfs virtual memory file system support (former shm fs)"
depends on SHMEM
help
Tmpfs is a file system which keeps all files in virtual memory.
diff --git a/fs/Makefile b/fs/Makefile
index 5c30a13..d2c3353 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -120,6 +120,6 @@
obj-$(CONFIG_OCFS2_FS) += ocfs2/
obj-$(CONFIG_BTRFS_FS) += btrfs/
obj-$(CONFIG_GFS2_FS) += gfs2/
-obj-$(y) += exofs/ # Multiple mods, used by nfs/objlayout
+obj-y += exofs/ # Multiple modules
obj-$(CONFIG_CEPH_FS) += ceph/
obj-$(CONFIG_PSTORE) += pstore/
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index d5250c5..1dab6a1 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -247,7 +247,7 @@
inode->i_gid = ADFS_SB(sb)->s_gid;
inode->i_ino = obj->file_id;
inode->i_size = obj->size;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_blocks = (inode->i_size + sb->s_blocksize - 1) >>
sb->s_blocksize_bits;
diff --git a/fs/affs/amigaffs.c b/fs/affs/amigaffs.c
index 3a4557e..de37ec8 100644
--- a/fs/affs/amigaffs.c
+++ b/fs/affs/amigaffs.c
@@ -215,7 +215,7 @@
break;
default:
if (!AFFS_TAIL(sb, bh)->link_chain)
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
affs_free_block(sb, link_ino);
goto done;
@@ -316,7 +316,7 @@
if (inode->i_nlink > 1)
retval = affs_remove_link(dentry);
else
- inode->i_nlink = 0;
+ clear_nlink(inode);
affs_unlock_link(inode);
inode->i_ctime = CURRENT_TIME_SEC;
mark_inode_dirty(inode);
diff --git a/fs/affs/inode.c b/fs/affs/inode.c
index 5d82890..88a4b0b 100644
--- a/fs/affs/inode.c
+++ b/fs/affs/inode.c
@@ -54,7 +54,7 @@
prot = be32_to_cpu(tail->protect);
inode->i_size = 0;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mode = 0;
AFFS_I(inode)->i_extcnt = 1;
AFFS_I(inode)->i_ext_last = ~1;
@@ -137,7 +137,7 @@
sbi->s_hashsize + 1;
}
if (tail->link_chain)
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_mapping->a_ops = (sbi->s_flags & SF_OFS) ? &affs_aops_ofs : &affs_aops;
inode->i_op = &affs_file_inode_operations;
inode->i_fop = &affs_file_operations;
@@ -304,7 +304,7 @@
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
inode->i_ino = block;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
atomic_set(&AFFS_I(inode)->i_opencnt, 0);
AFFS_I(inode)->i_blkcnt = 0;
@@ -387,7 +387,7 @@
AFFS_TAIL(sb, inode_bh)->link_chain = cpu_to_be32(block);
affs_adjust_checksum(inode_bh, block - be32_to_cpu(chain));
mark_buffer_dirty_inode(inode_bh, inode);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
ihold(inode);
}
affs_fix_checksum(sb, bh);
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index e3e9efc..780a11d 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -277,7 +277,7 @@
inode->i_mapping->a_ops = (AFFS_SB(sb)->s_flags & SF_OFS) ? &affs_aops_ofs : &affs_aops;
error = affs_add_entry(dir, inode, dentry, ST_FILE);
if (error) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
iput(inode);
return error;
}
@@ -305,7 +305,7 @@
error = affs_add_entry(dir, inode, dentry, ST_USERDIR);
if (error) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
mark_inode_dirty(inode);
iput(inode);
return error;
@@ -392,7 +392,7 @@
return 0;
err:
- inode->i_nlink = 0;
+ clear_nlink(inode);
mark_inode_dirty(inode);
iput(inode);
return error;
diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index 346e328..2f213d1 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -90,7 +90,7 @@
vnode->vfs_inode.i_uid = status->owner;
vnode->vfs_inode.i_gid = status->group;
vnode->vfs_inode.i_generation = vnode->fid.unique;
- vnode->vfs_inode.i_nlink = status->nlink;
+ set_nlink(&vnode->vfs_inode, status->nlink);
mode = vnode->vfs_inode.i_mode;
mode &= ~S_IALLUGO;
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 0fdab6e..d890ae3 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -67,7 +67,7 @@
fscache_attr_changed(vnode->cache);
#endif
- inode->i_nlink = vnode->status.nlink;
+ set_nlink(inode, vnode->status.nlink);
inode->i_uid = vnode->status.owner;
inode->i_gid = 0;
inode->i_size = vnode->status.size;
@@ -174,7 +174,7 @@
inode->i_size = 0;
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
inode->i_op = &afs_autocell_inode_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_uid = 0;
inode->i_gid = 0;
inode->i_ctime.tv_sec = get_seconds();
diff --git a/fs/aio.c b/fs/aio.c
index e29ec48..78c514c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -440,8 +440,6 @@
static struct kiocb *__aio_get_req(struct kioctx *ctx)
{
struct kiocb *req = NULL;
- struct aio_ring *ring;
- int okay = 0;
req = kmem_cache_alloc(kiocb_cachep, GFP_KERNEL);
if (unlikely(!req))
@@ -459,39 +457,114 @@
INIT_LIST_HEAD(&req->ki_run_list);
req->ki_eventfd = NULL;
- /* Check if the completion queue has enough free space to
- * accept an event from this io.
- */
- spin_lock_irq(&ctx->ctx_lock);
- ring = kmap_atomic(ctx->ring_info.ring_pages[0], KM_USER0);
- if (ctx->reqs_active < aio_ring_avail(&ctx->ring_info, ring)) {
- list_add(&req->ki_list, &ctx->active_reqs);
- ctx->reqs_active++;
- okay = 1;
- }
- kunmap_atomic(ring, KM_USER0);
- spin_unlock_irq(&ctx->ctx_lock);
-
- if (!okay) {
- kmem_cache_free(kiocb_cachep, req);
- req = NULL;
- }
-
return req;
}
-static inline struct kiocb *aio_get_req(struct kioctx *ctx)
+/*
+ * struct kiocb's are allocated in batches to reduce the number of
+ * times the ctx lock is acquired and released.
+ */
+#define KIOCB_BATCH_SIZE 32L
+struct kiocb_batch {
+ struct list_head head;
+ long count; /* number of requests left to allocate */
+};
+
+static void kiocb_batch_init(struct kiocb_batch *batch, long total)
+{
+ INIT_LIST_HEAD(&batch->head);
+ batch->count = total;
+}
+
+static void kiocb_batch_free(struct kiocb_batch *batch)
+{
+ struct kiocb *req, *n;
+
+ list_for_each_entry_safe(req, n, &batch->head, ki_batch) {
+ list_del(&req->ki_batch);
+ kmem_cache_free(kiocb_cachep, req);
+ }
+}
+
+/*
+ * Allocate a batch of kiocbs. This avoids taking and dropping the
+ * context lock a lot during setup.
+ */
+static int kiocb_batch_refill(struct kioctx *ctx, struct kiocb_batch *batch)
+{
+ unsigned short allocated, to_alloc;
+ long avail;
+ bool called_fput = false;
+ struct kiocb *req, *n;
+ struct aio_ring *ring;
+
+ to_alloc = min(batch->count, KIOCB_BATCH_SIZE);
+ for (allocated = 0; allocated < to_alloc; allocated++) {
+ req = __aio_get_req(ctx);
+ if (!req)
+ /* allocation failed, go with what we've got */
+ break;
+ list_add(&req->ki_batch, &batch->head);
+ }
+
+ if (allocated == 0)
+ goto out;
+
+retry:
+ spin_lock_irq(&ctx->ctx_lock);
+ ring = kmap_atomic(ctx->ring_info.ring_pages[0]);
+
+ avail = aio_ring_avail(&ctx->ring_info, ring) - ctx->reqs_active;
+ BUG_ON(avail < 0);
+ if (avail == 0 && !called_fput) {
+ /*
+ * Handle a potential starvation case. It is possible that
+ * we hold the last reference on a struct file, causing us
+ * to delay the final fput to non-irq context. In this case,
+ * ctx->reqs_active is artificially high. Calling the fput
+ * routine here may free up a slot in the event completion
+ * ring, allowing this allocation to succeed.
+ */
+ kunmap_atomic(ring);
+ spin_unlock_irq(&ctx->ctx_lock);
+ aio_fput_routine(NULL);
+ called_fput = true;
+ goto retry;
+ }
+
+ if (avail < allocated) {
+ /* Trim back the number of requests. */
+ list_for_each_entry_safe(req, n, &batch->head, ki_batch) {
+ list_del(&req->ki_batch);
+ kmem_cache_free(kiocb_cachep, req);
+ if (--allocated <= avail)
+ break;
+ }
+ }
+
+ batch->count -= allocated;
+ list_for_each_entry(req, &batch->head, ki_batch) {
+ list_add(&req->ki_list, &ctx->active_reqs);
+ ctx->reqs_active++;
+ }
+
+ kunmap_atomic(ring);
+ spin_unlock_irq(&ctx->ctx_lock);
+
+out:
+ return allocated;
+}
+
+static inline struct kiocb *aio_get_req(struct kioctx *ctx,
+ struct kiocb_batch *batch)
{
struct kiocb *req;
- /* Handle a potential starvation case -- should be exceedingly rare as
- * requests will be stuck on fput_head only if the aio_fput_routine is
- * delayed and the requests were the last user of the struct file.
- */
- req = __aio_get_req(ctx);
- if (unlikely(NULL == req)) {
- aio_fput_routine(NULL);
- req = __aio_get_req(ctx);
- }
+
+ if (list_empty(&batch->head))
+ if (kiocb_batch_refill(ctx, batch) == 0)
+ return NULL;
+ req = list_first_entry(&batch->head, struct kiocb, ki_batch);
+ list_del(&req->ki_batch);
return req;
}
@@ -1387,13 +1460,13 @@
ret = compat_rw_copy_check_uvector(type,
(struct compat_iovec __user *)kiocb->ki_buf,
kiocb->ki_nbytes, 1, &kiocb->ki_inline_vec,
- &kiocb->ki_iovec);
+ &kiocb->ki_iovec, 1);
else
#endif
ret = rw_copy_check_uvector(type,
(struct iovec __user *)kiocb->ki_buf,
kiocb->ki_nbytes, 1, &kiocb->ki_inline_vec,
- &kiocb->ki_iovec);
+ &kiocb->ki_iovec, 1);
if (ret < 0)
goto out;
@@ -1515,7 +1588,8 @@
}
static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
- struct iocb *iocb, bool compat)
+ struct iocb *iocb, struct kiocb_batch *batch,
+ bool compat)
{
struct kiocb *req;
struct file *file;
@@ -1541,7 +1615,7 @@
if (unlikely(!file))
return -EBADF;
- req = aio_get_req(ctx); /* returns with 2 references to req */
+ req = aio_get_req(ctx, batch); /* returns with 2 references to req */
if (unlikely(!req)) {
fput(file);
return -EAGAIN;
@@ -1621,8 +1695,9 @@
{
struct kioctx *ctx;
long ret = 0;
- int i;
+ int i = 0;
struct blk_plug plug;
+ struct kiocb_batch batch;
if (unlikely(nr < 0))
return -EINVAL;
@@ -1639,6 +1714,8 @@
return -EINVAL;
}
+ kiocb_batch_init(&batch, nr);
+
blk_start_plug(&plug);
/*
@@ -1659,12 +1736,13 @@
break;
}
- ret = io_submit_one(ctx, user_iocb, &tmp, compat);
+ ret = io_submit_one(ctx, user_iocb, &tmp, &batch, compat);
if (ret)
break;
}
blk_finish_plug(&plug);
+ kiocb_batch_free(&batch);
put_ioctx(ctx);
return i ? i : ret;
}
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 180fa24..8179f1a 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -342,7 +342,7 @@
inode->i_ino = get_next_ino();
if (S_ISDIR(mode)) {
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_op = &autofs4_dir_inode_operations;
inode->i_fop = &autofs4_dir_operations;
} else if (S_ISLNK(mode)) {
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 720d885..8342ca6 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -357,7 +357,7 @@
inode->i_gid = befs_sb->mount_opts.use_gid ?
befs_sb->mount_opts.gid : (gid_t) fs32_to_cpu(sb, raw_inode->gid);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
/*
* BEFS's time is 64 bits, but current VFS is 32 bits...
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index b14cebf..9cc07401 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -199,7 +199,7 @@
printf("unlinking non-existent file %s:%lu (nlink=%d)\n",
inode->i_sb->s_id, inode->i_ino,
inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
de->ino = 0;
mark_buffer_dirty_inode(bh, dir);
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index a8e37f8..697af5b 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -78,7 +78,7 @@
BFS_I(inode)->i_dsk_ino = le16_to_cpu(di->i_ino);
inode->i_uid = le32_to_cpu(di->i_uid);
inode->i_gid = le32_to_cpu(di->i_gid);
- inode->i_nlink = le32_to_cpu(di->i_nlink);
+ set_nlink(inode, le32_to_cpu(di->i_nlink));
inode->i_size = BFS_FILESIZE(di);
inode->i_blocks = BFS_FILEBLOCKS(di);
inode->i_atime.tv_sec = le32_to_cpu(di->i_atime);
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index dd0fdfc..21ac5ee 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -795,7 +795,16 @@
* might try to exec. This is because the brk will
* follow the loader, and is not movable. */
#if defined(CONFIG_X86) || defined(CONFIG_ARM)
- load_bias = 0;
+ /* Memory randomization might have been switched off
+ * in runtime via sysctl.
+ * If that is the case, retain the original non-zero
+ * load_bias value in order to establish proper
+ * non-randomized mappings.
+ */
+ if (current->flags & PF_RANDOMIZE)
+ load_bias = 0;
+ else
+ load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr);
#else
load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr);
#endif
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index ba1a1ae..1e9edbd 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -521,7 +521,7 @@
write_unlock(&entries_lock);
if (dentry) {
- dentry->d_inode->i_nlink--;
+ drop_nlink(dentry->d_inode);
d_drop(dentry);
dput(dentry);
simple_release_fs(&bm_mnt, &entry_count);
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index b52c672..ae4d9cd 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1641,7 +1641,7 @@
inode->i_gid = btrfs_stack_inode_gid(inode_item);
btrfs_i_size_write(inode, btrfs_stack_inode_size(inode_item));
inode->i_mode = btrfs_stack_inode_mode(inode_item);
- inode->i_nlink = btrfs_stack_inode_nlink(inode_item);
+ set_nlink(inode, btrfs_stack_inode_nlink(inode_item));
inode_set_bytes(inode, btrfs_stack_inode_nbytes(inode_item));
BTRFS_I(inode)->generation = btrfs_stack_inode_generation(inode_item);
BTRFS_I(inode)->sequence = btrfs_stack_inode_sequence(inode_item);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 07b3ac6..07ea918 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1705,7 +1705,7 @@
sb->s_bdi = &fs_info->bdi;
fs_info->btree_inode->i_ino = BTRFS_BTREE_INODE_OBJECTID;
- fs_info->btree_inode->i_nlink = 1;
+ set_nlink(fs_info->btree_inode, 1);
/*
* we set the i_size on the btree inode to the max possible int.
* the real end of the address space is determined by all of
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index e4e57d5..1266f6e 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1821,7 +1821,7 @@
switch (origin) {
case SEEK_END:
case SEEK_CUR:
- offset = generic_file_llseek_unlocked(file, offset, origin);
+ offset = generic_file_llseek(file, offset, origin);
goto out;
case SEEK_DATA:
case SEEK_HOLE:
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index b2d004a..75686a6 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2534,7 +2534,7 @@
inode_item = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_inode_item);
inode->i_mode = btrfs_inode_mode(leaf, inode_item);
- inode->i_nlink = btrfs_inode_nlink(leaf, inode_item);
+ set_nlink(inode, btrfs_inode_nlink(leaf, inode_item));
inode->i_uid = btrfs_inode_uid(leaf, inode_item);
inode->i_gid = btrfs_inode_gid(leaf, inode_item);
btrfs_i_size_write(inode, btrfs_inode_size(leaf, inode_item));
@@ -6728,7 +6728,7 @@
inode->i_op = &btrfs_dir_inode_operations;
inode->i_fop = &btrfs_dir_file_operations;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
btrfs_i_size_write(inode, 0);
err = btrfs_update_inode(trans, new_root, inode);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 786639f..0618aa3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1030,7 +1030,7 @@
}
btrfs_release_path(path);
if (nlink != inode->i_nlink) {
- inode->i_nlink = nlink;
+ set_nlink(inode, nlink);
btrfs_update_inode(trans, root, inode);
}
BTRFS_I(inode)->index_cnt = (u64)-1;
diff --git a/fs/buffer.c b/fs/buffer.c
index 1a80b04..70a1974 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -213,13 +213,16 @@
* elsewhere, don't buffer_error if we had some unmapped buffers
*/
if (all_mapped) {
+ char b[BDEVNAME_SIZE];
+
printk("__find_get_block_slow() failed. "
"block=%llu, b_blocknr=%llu\n",
(unsigned long long)block,
(unsigned long long)bh->b_blocknr);
printk("b_state=0x%08lx, b_size=%zu\n",
bh->b_state, bh->b_size);
- printk("device blocksize: %d\n", 1 << bd_inode->i_blkbits);
+ printk("device %s blocksize: %d\n", bdevname(bdev, b),
+ 1 << bd_inode->i_blkbits);
}
out_unlock:
spin_unlock(&bd_mapping->private_lock);
@@ -1470,13 +1473,13 @@
}
/**
- * block_invalidatepage - invalidate part of all of a buffer-backed page
+ * block_invalidatepage - invalidate part or all of a buffer-backed page
*
* @page: the page which is affected
* @offset: the index of the truncation point
*
* block_invalidatepage() is called when all or part of the page has become
- * invalidatedby a truncate operation.
+ * invalidated by a truncate operation.
*
* block_invalidatepage() does not have to release all buffers, but it must
* ensure that no dirty buffer is left outside @offset and that no I/O
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 5a3953d..4144caf 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -228,36 +228,129 @@
}
/*
- * Build a vector of contiguous pages from the provided page list.
+ * Finish an async read(ahead) op.
*/
-static struct page **page_vector_from_list(struct list_head *page_list,
- unsigned *nr_pages)
+static void finish_read(struct ceph_osd_request *req, struct ceph_msg *msg)
{
+ struct inode *inode = req->r_inode;
+ struct ceph_osd_reply_head *replyhead;
+ int rc, bytes;
+ int i;
+
+ /* parse reply */
+ replyhead = msg->front.iov_base;
+ WARN_ON(le32_to_cpu(replyhead->num_ops) == 0);
+ rc = le32_to_cpu(replyhead->result);
+ bytes = le32_to_cpu(msg->hdr.data_len);
+
+ dout("finish_read %p req %p rc %d bytes %d\n", inode, req, rc, bytes);
+
+ /* unlock all pages, zeroing any data we didn't read */
+ for (i = 0; i < req->r_num_pages; i++, bytes -= PAGE_CACHE_SIZE) {
+ struct page *page = req->r_pages[i];
+
+ if (bytes < (int)PAGE_CACHE_SIZE) {
+ /* zero (remainder of) page */
+ int s = bytes < 0 ? 0 : bytes;
+ zero_user_segment(page, s, PAGE_CACHE_SIZE);
+ }
+ dout("finish_read %p uptodate %p idx %lu\n", inode, page,
+ page->index);
+ flush_dcache_page(page);
+ SetPageUptodate(page);
+ unlock_page(page);
+ page_cache_release(page);
+ }
+ kfree(req->r_pages);
+}
+
+/*
+ * start an async read(ahead) operation. return nr_pages we submitted
+ * a read for on success, or negative error code.
+ */
+static int start_read(struct inode *inode, struct list_head *page_list, int max)
+{
+ struct ceph_osd_client *osdc =
+ &ceph_inode_to_client(inode)->client->osdc;
+ struct ceph_inode_info *ci = ceph_inode(inode);
+ struct page *page = list_entry(page_list->prev, struct page, lru);
+ struct ceph_osd_request *req;
+ u64 off;
+ u64 len;
+ int i;
struct page **pages;
- struct page *page;
- int next_index, contig_pages = 0;
+ pgoff_t next_index;
+ int nr_pages = 0;
+ int ret;
+
+ off = page->index << PAGE_CACHE_SHIFT;
+
+ /* count pages */
+ next_index = page->index;
+ list_for_each_entry_reverse(page, page_list, lru) {
+ if (page->index != next_index)
+ break;
+ nr_pages++;
+ next_index++;
+ if (max && nr_pages == max)
+ break;
+ }
+ len = nr_pages << PAGE_CACHE_SHIFT;
+ dout("start_read %p nr_pages %d is %lld~%lld\n", inode, nr_pages,
+ off, len);
+
+ req = ceph_osdc_new_request(osdc, &ci->i_layout, ceph_vino(inode),
+ off, &len,
+ CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
+ NULL, 0,
+ ci->i_truncate_seq, ci->i_truncate_size,
+ NULL, false, 1, 0);
+ if (!req)
+ return -ENOMEM;
/* build page vector */
- pages = kmalloc(sizeof(*pages) * *nr_pages, GFP_NOFS);
+ nr_pages = len >> PAGE_CACHE_SHIFT;
+ pages = kmalloc(sizeof(*pages) * nr_pages, GFP_NOFS);
+ ret = -ENOMEM;
if (!pages)
- return ERR_PTR(-ENOMEM);
-
- BUG_ON(list_empty(page_list));
- next_index = list_entry(page_list->prev, struct page, lru)->index;
- list_for_each_entry_reverse(page, page_list, lru) {
- if (page->index == next_index) {
- dout("readpages page %d %p\n", contig_pages, page);
- pages[contig_pages] = page;
- contig_pages++;
- next_index++;
- } else {
- break;
+ goto out;
+ for (i = 0; i < nr_pages; ++i) {
+ page = list_entry(page_list->prev, struct page, lru);
+ BUG_ON(PageLocked(page));
+ list_del(&page->lru);
+
+ dout("start_read %p adding %p idx %lu\n", inode, page,
+ page->index);
+ if (add_to_page_cache_lru(page, &inode->i_data, page->index,
+ GFP_NOFS)) {
+ page_cache_release(page);
+ dout("start_read %p add_to_page_cache failed %p\n",
+ inode, page);
+ nr_pages = i;
+ goto out_pages;
}
+ pages[i] = page;
}
- *nr_pages = contig_pages;
- return pages;
+ req->r_pages = pages;
+ req->r_num_pages = nr_pages;
+ req->r_callback = finish_read;
+ req->r_inode = inode;
+
+ dout("start_read %p starting %p %lld~%lld\n", inode, req, off, len);
+ ret = ceph_osdc_start_request(osdc, req, false);
+ if (ret < 0)
+ goto out_pages;
+ ceph_osdc_put_request(req);
+ return nr_pages;
+
+out_pages:
+ ceph_release_page_vector(pages, nr_pages);
+out:
+ ceph_osdc_put_request(req);
+ return ret;
}
+
/*
* Read multiple pages. Leave pages we don't read + unlock in page_list;
* the caller (VM) cleans them up.
@@ -266,64 +359,24 @@
struct list_head *page_list, unsigned nr_pages)
{
struct inode *inode = file->f_dentry->d_inode;
- struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_osd_client *osdc =
- &ceph_inode_to_client(inode)->client->osdc;
+ struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
int rc = 0;
- struct page **pages;
- loff_t offset;
- u64 len;
+ int max = 0;
- dout("readpages %p file %p nr_pages %d\n",
- inode, file, nr_pages);
+ if (fsc->mount_options->rsize >= PAGE_CACHE_SIZE)
+ max = (fsc->mount_options->rsize + PAGE_CACHE_SIZE - 1)
+ >> PAGE_SHIFT;
- pages = page_vector_from_list(page_list, &nr_pages);
- if (IS_ERR(pages))
- return PTR_ERR(pages);
-
- /* guess read extent */
- offset = pages[0]->index << PAGE_CACHE_SHIFT;
- len = nr_pages << PAGE_CACHE_SHIFT;
- rc = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
- offset, &len,
- ci->i_truncate_seq, ci->i_truncate_size,
- pages, nr_pages, 0);
- if (rc == -ENOENT)
- rc = 0;
- if (rc < 0)
- goto out;
-
- for (; !list_empty(page_list) && len > 0;
- rc -= PAGE_CACHE_SIZE, len -= PAGE_CACHE_SIZE) {
- struct page *page =
- list_entry(page_list->prev, struct page, lru);
-
- list_del(&page->lru);
-
- if (rc < (int)PAGE_CACHE_SIZE) {
- /* zero (remainder of) page */
- int s = rc < 0 ? 0 : rc;
- zero_user_segment(page, s, PAGE_CACHE_SIZE);
- }
-
- if (add_to_page_cache_lru(page, mapping, page->index,
- GFP_NOFS)) {
- page_cache_release(page);
- dout("readpages %p add_to_page_cache failed %p\n",
- inode, page);
- continue;
- }
- dout("readpages %p adding %p idx %lu\n", inode, page,
- page->index);
- flush_dcache_page(page);
- SetPageUptodate(page);
- unlock_page(page);
- page_cache_release(page);
+ dout("readpages %p file %p nr_pages %d max %d\n", inode, file, nr_pages,
+ max);
+ while (!list_empty(page_list)) {
+ rc = start_read(inode, page_list, max);
+ if (rc < 0)
+ goto out;
+ BUG_ON(rc == 0);
}
- rc = 0;
-
out:
- kfree(pages);
+ dout("readpages %p file %p ret %d\n", inode, file, rc);
return rc;
}
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 8d74ad7..15b21e3 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -945,7 +945,7 @@
seq, issue_seq, mseq, follows, size, max_size,
xattr_version, xattrs_buf ? (int)xattrs_buf->vec.iov_len : 0);
- msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPS, sizeof(*fc), GFP_NOFS);
+ msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPS, sizeof(*fc), GFP_NOFS, false);
if (!msg)
return -ENOMEM;
@@ -2363,7 +2363,7 @@
}
if ((issued & CEPH_CAP_LINK_EXCL) == 0)
- inode->i_nlink = le32_to_cpu(grant->nlink);
+ set_nlink(inode, le32_to_cpu(grant->nlink));
if ((issued & CEPH_CAP_XATTR_EXCL) == 0 && grant->xattr_len) {
int len = le32_to_cpu(grant->xattr_len);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 095799b..1616a0d 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -9,7 +9,6 @@
#include <linux/namei.h>
#include <linux/writeback.h>
#include <linux/vmalloc.h>
-#include <linux/pagevec.h>
#include "super.h"
#include "mds_client.h"
@@ -619,7 +618,7 @@
}
if ((issued & CEPH_CAP_LINK_EXCL) == 0)
- inode->i_nlink = le32_to_cpu(info->nlink);
+ set_nlink(inode, le32_to_cpu(info->nlink));
/* be careful with mtime, atime, size */
ceph_decode_timespec(&atime, &info->atime);
@@ -1364,49 +1363,6 @@
}
/*
- * invalidate any pages that are not dirty or under writeback. this
- * includes pages that are clean and mapped.
- */
-static void ceph_invalidate_nondirty_pages(struct address_space *mapping)
-{
- struct pagevec pvec;
- pgoff_t next = 0;
- int i;
-
- pagevec_init(&pvec, 0);
- while (pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE)) {
- for (i = 0; i < pagevec_count(&pvec); i++) {
- struct page *page = pvec.pages[i];
- pgoff_t index;
- int skip_page =
- (PageDirty(page) || PageWriteback(page));
-
- if (!skip_page)
- skip_page = !trylock_page(page);
-
- /*
- * We really shouldn't be looking at the ->index of an
- * unlocked page. But we're not allowed to lock these
- * pages. So we rely upon nobody altering the ->index
- * of this (pinned-by-us) page.
- */
- index = page->index;
- if (index > next)
- next = index;
- next++;
-
- if (skip_page)
- continue;
-
- generic_error_remove_page(mapping, page);
- unlock_page(page);
- }
- pagevec_release(&pvec);
- cond_resched();
- }
-}
-
-/*
* Invalidate inode pages in a worker thread. (This can't be done
* in the message handler context.)
*/
@@ -1429,7 +1385,7 @@
orig_gen = ci->i_rdcache_gen;
spin_unlock(&inode->i_lock);
- ceph_invalidate_nondirty_pages(inode->i_mapping);
+ truncate_inode_pages(&inode->i_data, 0);
spin_lock(&inode->i_lock);
if (orig_gen == ci->i_rdcache_gen &&
diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c
index 3b256b5..5a14c29 100644
--- a/fs/ceph/ioctl.c
+++ b/fs/ceph/ioctl.c
@@ -42,17 +42,39 @@
struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
struct ceph_mds_request *req;
struct ceph_ioctl_layout l;
+ struct ceph_inode_info *ci = ceph_inode(file->f_dentry->d_inode);
+ struct ceph_ioctl_layout nl;
int err, i;
- /* copy and validate */
if (copy_from_user(&l, arg, sizeof(l)))
return -EFAULT;
- if ((l.object_size & ~PAGE_MASK) ||
- (l.stripe_unit & ~PAGE_MASK) ||
- !l.stripe_unit ||
- (l.object_size &&
- (unsigned)l.object_size % (unsigned)l.stripe_unit))
+ /* validate changed params against current layout */
+ err = ceph_do_getattr(file->f_dentry->d_inode, CEPH_STAT_CAP_LAYOUT);
+ if (!err) {
+ nl.stripe_unit = ceph_file_layout_su(ci->i_layout);
+ nl.stripe_count = ceph_file_layout_stripe_count(ci->i_layout);
+ nl.object_size = ceph_file_layout_object_size(ci->i_layout);
+ nl.data_pool = le32_to_cpu(ci->i_layout.fl_pg_pool);
+ nl.preferred_osd =
+ (s32)le32_to_cpu(ci->i_layout.fl_pg_preferred);
+ } else
+ return err;
+
+ if (l.stripe_count)
+ nl.stripe_count = l.stripe_count;
+ if (l.stripe_unit)
+ nl.stripe_unit = l.stripe_unit;
+ if (l.object_size)
+ nl.object_size = l.object_size;
+ if (l.data_pool)
+ nl.data_pool = l.data_pool;
+ if (l.preferred_osd)
+ nl.preferred_osd = l.preferred_osd;
+
+ if ((nl.object_size & ~PAGE_MASK) ||
+ (nl.stripe_unit & ~PAGE_MASK) ||
+ ((unsigned)nl.object_size % (unsigned)nl.stripe_unit))
return -EINVAL;
/* make sure it's a valid data pool */
diff --git a/fs/ceph/ioctl.h b/fs/ceph/ioctl.h
index 0c5167e..be4a604 100644
--- a/fs/ceph/ioctl.h
+++ b/fs/ceph/ioctl.h
@@ -6,7 +6,31 @@
#define CEPH_IOCTL_MAGIC 0x97
-/* just use u64 to align sanely on all archs */
+/*
+ * CEPH_IOC_GET_LAYOUT - get file layout or dir layout policy
+ * CEPH_IOC_SET_LAYOUT - set file layout
+ * CEPH_IOC_SET_LAYOUT_POLICY - set dir layout policy
+ *
+ * The file layout specifies how file data is striped over objects in
+ * the distributed object store, which object pool they belong to (if
+ * it differs from the default), and an optional 'preferred osd' to
+ * store them on.
+ *
+ * Files get a new layout based on the policy set on the containing
+ * directory or one of its ancestors. The GET_LAYOUT ioctl will let
+ * you examine the layout for a file or the policy on a directory.
+ *
+ * SET_LAYOUT will let you set a layout on a newly created file. This
+ * only works immediately after the file is created and before any
+ * data is written to it.
+ *
+ * SET_LAYOUT_POLICY will let you set a layout policy (default layout)
+ * on a directory that will apply to any new files created in that
+ * directory (or any child directory that doesn't specify a layout of
+ * its own).
+ */
+
+/* use u64 to align sanely on all archs */
struct ceph_ioctl_layout {
__u64 stripe_unit, stripe_count, object_size;
__u64 data_pool;
@@ -21,6 +45,8 @@
struct ceph_ioctl_layout)
/*
+ * CEPH_IOC_GET_DATALOC - get location of file data in the cluster
+ *
* Extract identity, address of the OSD and object storing a given
* file offset.
*/
@@ -39,7 +65,34 @@
#define CEPH_IOC_GET_DATALOC _IOWR(CEPH_IOCTL_MAGIC, 3, \
struct ceph_ioctl_dataloc)
+/*
+ * CEPH_IOC_LAZYIO - relax consistency
+ *
+ * Normally Ceph switches to synchronous IO when multiple clients have
+ * the file open (and or more for write). Reads and writes bypass the
+ * page cache and go directly to the OSD. Setting this flag on a file
+ * descriptor will allow buffered IO for this file in cases where the
+ * application knows it won't interfere with other nodes (or doesn't
+ * care).
+ */
#define CEPH_IOC_LAZYIO _IO(CEPH_IOCTL_MAGIC, 4)
+
+/*
+ * CEPH_IOC_SYNCIO - force synchronous IO
+ *
+ * This ioctl sets a file flag that forces the synchronous IO that
+ * bypasses the page cache, even if it is not necessary. This is
+ * essentially the opposite behavior of IOC_LAZYIO. This forces the
+ * same read/write path as a file opened by multiple clients when one
+ * or more of those clients is opened for write.
+ *
+ * Note that this type of sync IO takes a different path than a file
+ * opened with O_SYNC/D_SYNC (writes hit the page cache and are
+ * immediately flushed on page boundaries). It is very similar to
+ * O_DIRECT (writes bypass the page cache) excep that O_DIRECT writes
+ * are not copied (user page must remain stable) and O_DIRECT writes
+ * have alignment restrictions (on the buffer and file offset).
+ */
#define CEPH_IOC_SYNCIO _IO(CEPH_IOCTL_MAGIC, 5)
#endif
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 86c59e1..1d72f15 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -764,7 +764,8 @@
struct ceph_msg *msg;
struct ceph_mds_session_head *h;
- msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h), GFP_NOFS);
+ msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h), GFP_NOFS,
+ false);
if (!msg) {
pr_err("create_session_msg ENOMEM creating msg\n");
return NULL;
@@ -1240,7 +1241,7 @@
while (session->s_num_cap_releases < session->s_nr_caps + extra) {
spin_unlock(&session->s_cap_lock);
msg = ceph_msg_new(CEPH_MSG_CLIENT_CAPRELEASE, PAGE_CACHE_SIZE,
- GFP_NOFS);
+ GFP_NOFS, false);
if (!msg)
goto out_unlocked;
dout("add_cap_releases %p msg %p now %d\n", session, msg,
@@ -1652,7 +1653,7 @@
if (req->r_old_dentry_drop)
len += req->r_old_dentry->d_name.len;
- msg = ceph_msg_new(CEPH_MSG_CLIENT_REQUEST, len, GFP_NOFS);
+ msg = ceph_msg_new(CEPH_MSG_CLIENT_REQUEST, len, GFP_NOFS, false);
if (!msg) {
msg = ERR_PTR(-ENOMEM);
goto out_free2;
@@ -2518,7 +2519,7 @@
goto fail_nopagelist;
ceph_pagelist_init(pagelist);
- reply = ceph_msg_new(CEPH_MSG_CLIENT_RECONNECT, 0, GFP_NOFS);
+ reply = ceph_msg_new(CEPH_MSG_CLIENT_RECONNECT, 0, GFP_NOFS, false);
if (!reply)
goto fail_nomsg;
@@ -2831,7 +2832,7 @@
dnamelen = dentry->d_name.len;
len += dnamelen;
- msg = ceph_msg_new(CEPH_MSG_CLIENT_LEASE, len, GFP_NOFS);
+ msg = ceph_msg_new(CEPH_MSG_CLIENT_LEASE, len, GFP_NOFS, false);
if (!msg)
return;
lease = msg->front.iov_base;
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 88bacaf..788f5ad 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -114,6 +114,7 @@
enum {
Opt_wsize,
Opt_rsize,
+ Opt_rasize,
Opt_caps_wanted_delay_min,
Opt_caps_wanted_delay_max,
Opt_cap_release_safety,
@@ -136,6 +137,7 @@
static match_table_t fsopt_tokens = {
{Opt_wsize, "wsize=%d"},
{Opt_rsize, "rsize=%d"},
+ {Opt_rasize, "rasize=%d"},
{Opt_caps_wanted_delay_min, "caps_wanted_delay_min=%d"},
{Opt_caps_wanted_delay_max, "caps_wanted_delay_max=%d"},
{Opt_cap_release_safety, "cap_release_safety=%d"},
@@ -196,6 +198,9 @@
case Opt_rsize:
fsopt->rsize = intval;
break;
+ case Opt_rasize:
+ fsopt->rasize = intval;
+ break;
case Opt_caps_wanted_delay_min:
fsopt->caps_wanted_delay_min = intval;
break;
@@ -289,28 +294,29 @@
dout("parse_mount_options %p, dev_name '%s'\n", fsopt, dev_name);
- fsopt->sb_flags = flags;
- fsopt->flags = CEPH_MOUNT_OPT_DEFAULT;
+ fsopt->sb_flags = flags;
+ fsopt->flags = CEPH_MOUNT_OPT_DEFAULT;
- fsopt->rsize = CEPH_RSIZE_DEFAULT;
- fsopt->snapdir_name = kstrdup(CEPH_SNAPDIRNAME_DEFAULT, GFP_KERNEL);
+ fsopt->rsize = CEPH_RSIZE_DEFAULT;
+ fsopt->rasize = CEPH_RASIZE_DEFAULT;
+ fsopt->snapdir_name = kstrdup(CEPH_SNAPDIRNAME_DEFAULT, GFP_KERNEL);
fsopt->caps_wanted_delay_min = CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT;
fsopt->caps_wanted_delay_max = CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT;
- fsopt->cap_release_safety = CEPH_CAP_RELEASE_SAFETY_DEFAULT;
- fsopt->max_readdir = CEPH_MAX_READDIR_DEFAULT;
- fsopt->max_readdir_bytes = CEPH_MAX_READDIR_BYTES_DEFAULT;
- fsopt->congestion_kb = default_congestion_kb();
-
- /* ip1[:port1][,ip2[:port2]...]:/subdir/in/fs */
- err = -EINVAL;
- if (!dev_name)
- goto out;
- *path = strstr(dev_name, ":/");
- if (*path == NULL) {
- pr_err("device name is missing path (no :/ in %s)\n",
- dev_name);
- goto out;
- }
+ fsopt->cap_release_safety = CEPH_CAP_RELEASE_SAFETY_DEFAULT;
+ fsopt->max_readdir = CEPH_MAX_READDIR_DEFAULT;
+ fsopt->max_readdir_bytes = CEPH_MAX_READDIR_BYTES_DEFAULT;
+ fsopt->congestion_kb = default_congestion_kb();
+
+ /* ip1[:port1][,ip2[:port2]...]:/subdir/in/fs */
+ err = -EINVAL;
+ if (!dev_name)
+ goto out;
+ *path = strstr(dev_name, ":/");
+ if (*path == NULL) {
+ pr_err("device name is missing path (no :/ in %s)\n",
+ dev_name);
+ goto out;
+ }
dev_name_end = *path;
dout("device name '%.*s'\n", (int)(dev_name_end - dev_name), dev_name);
@@ -376,6 +382,8 @@
seq_printf(m, ",wsize=%d", fsopt->wsize);
if (fsopt->rsize != CEPH_RSIZE_DEFAULT)
seq_printf(m, ",rsize=%d", fsopt->rsize);
+ if (fsopt->rasize != CEPH_RASIZE_DEFAULT)
+ seq_printf(m, ",rasize=%d", fsopt->rsize);
if (fsopt->congestion_kb != default_congestion_kb())
seq_printf(m, ",write_congestion_kb=%d", fsopt->congestion_kb);
if (fsopt->caps_wanted_delay_min != CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT)
@@ -422,20 +430,23 @@
struct ceph_options *opt)
{
struct ceph_fs_client *fsc;
+ const unsigned supported_features =
+ CEPH_FEATURE_FLOCK |
+ CEPH_FEATURE_DIRLAYOUTHASH;
+ const unsigned required_features = 0;
int err = -ENOMEM;
fsc = kzalloc(sizeof(*fsc), GFP_KERNEL);
if (!fsc)
return ERR_PTR(-ENOMEM);
- fsc->client = ceph_create_client(opt, fsc);
+ fsc->client = ceph_create_client(opt, fsc, supported_features,
+ required_features);
if (IS_ERR(fsc->client)) {
err = PTR_ERR(fsc->client);
goto fail;
}
fsc->client->extra_mon_dispatch = extra_mon_dispatch;
- fsc->client->supported_features |= CEPH_FEATURE_FLOCK |
- CEPH_FEATURE_DIRLAYOUTHASH;
fsc->client->monc.want_mdsmap = 1;
fsc->mount_options = fsopt;
@@ -774,10 +785,10 @@
{
int err;
- /* set ra_pages based on rsize mount option? */
- if (fsc->mount_options->rsize >= PAGE_CACHE_SIZE)
+ /* set ra_pages based on rasize mount option? */
+ if (fsc->mount_options->rasize >= PAGE_CACHE_SIZE)
fsc->backing_dev_info.ra_pages =
- (fsc->mount_options->rsize + PAGE_CACHE_SIZE - 1)
+ (fsc->mount_options->rasize + PAGE_CACHE_SIZE - 1)
>> PAGE_SHIFT;
else
fsc->backing_dev_info.ra_pages =
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index a23eed5..b01442a 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -36,7 +36,8 @@
#define ceph_test_mount_opt(fsc, opt) \
(!!((fsc)->mount_options->flags & CEPH_MOUNT_OPT_##opt))
-#define CEPH_RSIZE_DEFAULT (512*1024) /* readahead */
+#define CEPH_RSIZE_DEFAULT 0 /* max read size */
+#define CEPH_RASIZE_DEFAULT (8192*1024) /* readahead */
#define CEPH_MAX_READDIR_DEFAULT 1024
#define CEPH_MAX_READDIR_BYTES_DEFAULT (512*1024)
#define CEPH_SNAPDIRNAME_DEFAULT ".snap"
@@ -45,8 +46,9 @@
int flags;
int sb_flags;
- int wsize;
- int rsize; /* max readahead */
+ int wsize; /* max write size */
+ int rsize; /* max read size */
+ int rasize; /* max readahead */
int congestion_kb; /* max writeback in flight */
int caps_wanted_delay_min, caps_wanted_delay_max;
int cap_release_safety;
@@ -344,9 +346,10 @@
* x86_64+ino32 64 32
* x86_64 64 64
*/
-static inline u32 ceph_ino_to_ino32(ino_t ino)
+static inline u32 ceph_ino_to_ino32(__u64 vino)
{
- ino ^= ino >> (sizeof(ino) * 8 - 32);
+ u32 ino = vino & 0xffffffff;
+ ino ^= vino >> 32;
if (!ino)
ino = 1;
return ino;
@@ -357,11 +360,11 @@
*/
static inline ino_t ceph_vino_to_ino(struct ceph_vino vino)
{
- ino_t ino = (ino_t)vino.ino; /* ^ (vino.snap << 20); */
#if BITS_PER_LONG == 32
- ino = ceph_ino_to_ino32(ino);
+ return ceph_ino_to_ino32(vino.ino);
+#else
+ return (ino_t)vino.ino;
#endif
- return ino;
}
/*
diff --git a/fs/cifs/README b/fs/cifs/README
index c5c2c5e..895da1d 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -745,4 +745,18 @@
create cifs.spnego * * /usr/local/sbin/cifs.upcall %k
create dns_resolver * * /usr/local/sbin/cifs.upcall %k
+CIFS kernel module parameters
+=============================
+These module parameters can be specified or modified either during the time of
+module loading or during the runtime by using the interface
+ /proc/module/cifs/parameters/<param>
+
+i.e. echo "value" > /sys/module/cifs/parameters/<param>
+
+1. echo_retries - The number of echo attempts before giving up and
+ reconnecting to the server. The default is 5. The value 0
+ means never reconnect.
+
+2. enable_oplocks - Enable or disable oplocks. Oplocks are enabled by default.
+ [Y/y/1]. To disable use any of [N/n/0].
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 6d40656..84e8c07 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -511,7 +511,7 @@
static int cifs_oplock_proc_show(struct seq_file *m, void *v)
{
- seq_printf(m, "%d\n", oplockEnabled);
+ seq_printf(m, "%d\n", enable_oplocks);
return 0;
}
@@ -526,13 +526,16 @@
char c;
int rc;
+ printk(KERN_WARNING "CIFS: The /proc/fs/cifs/OplockEnabled interface "
+ "will be removed in kernel version 3.4. Please migrate to "
+ "using the 'enable_oplocks' module parameter in cifs.ko.\n");
rc = get_user(c, buffer);
if (rc)
return rc;
if (c == '0' || c == 'n' || c == 'N')
- oplockEnabled = 0;
+ enable_oplocks = false;
else if (c == '1' || c == 'y' || c == 'Y')
- oplockEnabled = 1;
+ enable_oplocks = true;
return count;
}
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 7260e11..500d658 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -43,6 +43,8 @@
#define CIFS_MOUNT_STRICT_IO 0x40000 /* strict cache mode */
#define CIFS_MOUNT_RWPIDFORWARD 0x80000 /* use pid forwarding for rw */
#define CIFS_MOUNT_POSIXACL 0x100000 /* mirror of MS_POSIXACL in mnt_cifs_flags */
+#define CIFS_MOUNT_CIFS_BACKUPUID 0x200000 /* backup intent bit for a user */
+#define CIFS_MOUNT_CIFS_BACKUPGID 0x400000 /* backup intent bit for a group */
struct cifs_sb_info {
struct rb_root tlink_tree;
@@ -55,6 +57,8 @@
atomic_t active;
uid_t mnt_uid;
gid_t mnt_gid;
+ uid_t mnt_backupuid;
+ gid_t mnt_backupgid;
mode_t mnt_file_mode;
mode_t mnt_dir_mode;
unsigned int mnt_cifs_flags;
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index d0f59fa..72ddf23 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -91,9 +91,76 @@
shrink_idmap_tree(root, nr_to_scan, &nr_rem, &nr_del);
spin_unlock(&sidgidlock);
+ root = &siduidtree;
+ spin_lock(&uidsidlock);
+ shrink_idmap_tree(root, nr_to_scan, &nr_rem, &nr_del);
+ spin_unlock(&uidsidlock);
+
+ root = &sidgidtree;
+ spin_lock(&gidsidlock);
+ shrink_idmap_tree(root, nr_to_scan, &nr_rem, &nr_del);
+ spin_unlock(&gidsidlock);
+
return nr_rem;
}
+static void
+sid_rb_insert(struct rb_root *root, unsigned long cid,
+ struct cifs_sid_id **psidid, char *typestr)
+{
+ char *strptr;
+ struct rb_node *node = root->rb_node;
+ struct rb_node *parent = NULL;
+ struct rb_node **linkto = &(root->rb_node);
+ struct cifs_sid_id *lsidid;
+
+ while (node) {
+ lsidid = rb_entry(node, struct cifs_sid_id, rbnode);
+ parent = node;
+ if (cid > lsidid->id) {
+ linkto = &(node->rb_left);
+ node = node->rb_left;
+ }
+ if (cid < lsidid->id) {
+ linkto = &(node->rb_right);
+ node = node->rb_right;
+ }
+ }
+
+ (*psidid)->id = cid;
+ (*psidid)->time = jiffies - (SID_MAP_RETRY + 1);
+ (*psidid)->refcount = 0;
+
+ sprintf((*psidid)->sidstr, "%s", typestr);
+ strptr = (*psidid)->sidstr + strlen((*psidid)->sidstr);
+ sprintf(strptr, "%ld", cid);
+
+ clear_bit(SID_ID_PENDING, &(*psidid)->state);
+ clear_bit(SID_ID_MAPPED, &(*psidid)->state);
+
+ rb_link_node(&(*psidid)->rbnode, parent, linkto);
+ rb_insert_color(&(*psidid)->rbnode, root);
+}
+
+static struct cifs_sid_id *
+sid_rb_search(struct rb_root *root, unsigned long cid)
+{
+ struct rb_node *node = root->rb_node;
+ struct cifs_sid_id *lsidid;
+
+ while (node) {
+ lsidid = rb_entry(node, struct cifs_sid_id, rbnode);
+ if (cid > lsidid->id)
+ node = node->rb_left;
+ else if (cid < lsidid->id)
+ node = node->rb_right;
+ else /* node found */
+ return lsidid;
+ }
+
+ return NULL;
+}
+
static struct shrinker cifs_shrinker = {
.shrink = cifs_idmap_shrinker,
.seeks = DEFAULT_SEEKS,
@@ -110,6 +177,7 @@
memcpy(payload, data, datalen);
key->payload.data = payload;
+ key->datalen = datalen;
return 0;
}
@@ -224,6 +292,120 @@
}
static int
+id_to_sid(unsigned long cid, uint sidtype, struct cifs_sid *ssid)
+{
+ int rc = 0;
+ struct key *sidkey;
+ const struct cred *saved_cred;
+ struct cifs_sid *lsid;
+ struct cifs_sid_id *psidid, *npsidid;
+ struct rb_root *cidtree;
+ spinlock_t *cidlock;
+
+ if (sidtype == SIDOWNER) {
+ cidlock = &siduidlock;
+ cidtree = &uidtree;
+ } else if (sidtype == SIDGROUP) {
+ cidlock = &sidgidlock;
+ cidtree = &gidtree;
+ } else
+ return -EINVAL;
+
+ spin_lock(cidlock);
+ psidid = sid_rb_search(cidtree, cid);
+
+ if (!psidid) { /* node does not exist, allocate one & attempt adding */
+ spin_unlock(cidlock);
+ npsidid = kzalloc(sizeof(struct cifs_sid_id), GFP_KERNEL);
+ if (!npsidid)
+ return -ENOMEM;
+
+ npsidid->sidstr = kmalloc(SIDLEN, GFP_KERNEL);
+ if (!npsidid->sidstr) {
+ kfree(npsidid);
+ return -ENOMEM;
+ }
+
+ spin_lock(cidlock);
+ psidid = sid_rb_search(cidtree, cid);
+ if (psidid) { /* node happened to get inserted meanwhile */
+ ++psidid->refcount;
+ spin_unlock(cidlock);
+ kfree(npsidid->sidstr);
+ kfree(npsidid);
+ } else {
+ psidid = npsidid;
+ sid_rb_insert(cidtree, cid, &psidid,
+ sidtype == SIDOWNER ? "oi:" : "gi:");
+ ++psidid->refcount;
+ spin_unlock(cidlock);
+ }
+ } else {
+ ++psidid->refcount;
+ spin_unlock(cidlock);
+ }
+
+ /*
+ * If we are here, it is safe to access psidid and its fields
+ * since a reference was taken earlier while holding the spinlock.
+ * A reference on the node is put without holding the spinlock
+ * and it is OK to do so in this case, shrinker will not erase
+ * this node until all references are put and we do not access
+ * any fields of the node after a reference is put .
+ */
+ if (test_bit(SID_ID_MAPPED, &psidid->state)) {
+ memcpy(ssid, &psidid->sid, sizeof(struct cifs_sid));
+ psidid->time = jiffies; /* update ts for accessing */
+ goto id_sid_out;
+ }
+
+ if (time_after(psidid->time + SID_MAP_RETRY, jiffies)) {
+ rc = -EINVAL;
+ goto id_sid_out;
+ }
+
+ if (!test_and_set_bit(SID_ID_PENDING, &psidid->state)) {
+ saved_cred = override_creds(root_cred);
+ sidkey = request_key(&cifs_idmap_key_type, psidid->sidstr, "");
+ if (IS_ERR(sidkey)) {
+ rc = -EINVAL;
+ cFYI(1, "%s: Can't map and id to a SID", __func__);
+ } else {
+ lsid = (struct cifs_sid *)sidkey->payload.data;
+ memcpy(&psidid->sid, lsid,
+ sidkey->datalen < sizeof(struct cifs_sid) ?
+ sidkey->datalen : sizeof(struct cifs_sid));
+ memcpy(ssid, &psidid->sid,
+ sidkey->datalen < sizeof(struct cifs_sid) ?
+ sidkey->datalen : sizeof(struct cifs_sid));
+ set_bit(SID_ID_MAPPED, &psidid->state);
+ key_put(sidkey);
+ kfree(psidid->sidstr);
+ }
+ psidid->time = jiffies; /* update ts for accessing */
+ revert_creds(saved_cred);
+ clear_bit(SID_ID_PENDING, &psidid->state);
+ wake_up_bit(&psidid->state, SID_ID_PENDING);
+ } else {
+ rc = wait_on_bit(&psidid->state, SID_ID_PENDING,
+ sidid_pending_wait, TASK_INTERRUPTIBLE);
+ if (rc) {
+ cFYI(1, "%s: sidid_pending_wait interrupted %d",
+ __func__, rc);
+ --psidid->refcount;
+ return rc;
+ }
+ if (test_bit(SID_ID_MAPPED, &psidid->state))
+ memcpy(ssid, &psidid->sid, sizeof(struct cifs_sid));
+ else
+ rc = -EINVAL;
+ }
+id_sid_out:
+ --psidid->refcount;
+ return rc;
+}
+
+static int
sid_to_id(struct cifs_sb_info *cifs_sb, struct cifs_sid *psid,
struct cifs_fattr *fattr, uint sidtype)
{
@@ -383,6 +565,10 @@
spin_lock_init(&sidgidlock);
gidtree = RB_ROOT;
+ spin_lock_init(&uidsidlock);
+ siduidtree = RB_ROOT;
+ spin_lock_init(&gidsidlock);
+ sidgidtree = RB_ROOT;
register_shrinker(&cifs_shrinker);
cFYI(1, "cifs idmap keyring: %d\n", key_serial(keyring));
@@ -422,6 +608,18 @@
while ((node = rb_first(root)))
rb_erase(node, root);
spin_unlock(&sidgidlock);
+
+ root = &siduidtree;
+ spin_lock(&uidsidlock);
+ while ((node = rb_first(root)))
+ rb_erase(node, root);
+ spin_unlock(&uidsidlock);
+
+ root = &sidgidtree;
+ spin_lock(&gidsidlock);
+ while ((node = rb_first(root)))
+ rb_erase(node, root);
+ spin_unlock(&gidsidlock);
}
/* if the two SIDs (roughly equivalent to a UUID for a user or group) are
@@ -706,7 +904,7 @@
acl_size = sizeof(struct cifs_acl);
num_aces = le32_to_cpu(pdacl->num_aces);
- if (num_aces > 0) {
+ if (num_aces > 0) {
umode_t user_mask = S_IRWXU;
umode_t group_mask = S_IRWXG;
umode_t other_mask = S_IRWXU | S_IRWXG | S_IRWXO;
@@ -868,52 +1066,82 @@
else
cFYI(1, "no ACL"); /* BB grant all or default perms? */
-/* cifscred->uid = owner_sid_ptr->rid;
- cifscred->gid = group_sid_ptr->rid;
- memcpy((void *)(&(cifscred->osid)), (void *)owner_sid_ptr,
- sizeof(struct cifs_sid));
- memcpy((void *)(&(cifscred->gsid)), (void *)group_sid_ptr,
- sizeof(struct cifs_sid)); */
-
return rc;
}
-
/* Convert permission bits from mode to equivalent CIFS ACL */
static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd,
- struct inode *inode, __u64 nmode)
+ __u32 secdesclen, __u64 nmode, uid_t uid, gid_t gid, int *aclflag)
{
int rc = 0;
__u32 dacloffset;
__u32 ndacloffset;
__u32 sidsoffset;
struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
+ struct cifs_sid *nowner_sid_ptr, *ngroup_sid_ptr;
struct cifs_acl *dacl_ptr = NULL; /* no need for SACL ptr */
struct cifs_acl *ndacl_ptr = NULL; /* no need for SACL ptr */
- if ((inode == NULL) || (pntsd == NULL) || (pnntsd == NULL))
- return -EIO;
-
- owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
+ if (nmode != NO_CHANGE_64) { /* chmod */
+ owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
le32_to_cpu(pntsd->osidoffset));
- group_sid_ptr = (struct cifs_sid *)((char *)pntsd +
+ group_sid_ptr = (struct cifs_sid *)((char *)pntsd +
le32_to_cpu(pntsd->gsidoffset));
+ dacloffset = le32_to_cpu(pntsd->dacloffset);
+ dacl_ptr = (struct cifs_acl *)((char *)pntsd + dacloffset);
+ ndacloffset = sizeof(struct cifs_ntsd);
+ ndacl_ptr = (struct cifs_acl *)((char *)pnntsd + ndacloffset);
+ ndacl_ptr->revision = dacl_ptr->revision;
+ ndacl_ptr->size = 0;
+ ndacl_ptr->num_aces = 0;
- dacloffset = le32_to_cpu(pntsd->dacloffset);
- dacl_ptr = (struct cifs_acl *)((char *)pntsd + dacloffset);
-
- ndacloffset = sizeof(struct cifs_ntsd);
- ndacl_ptr = (struct cifs_acl *)((char *)pnntsd + ndacloffset);
- ndacl_ptr->revision = dacl_ptr->revision;
- ndacl_ptr->size = 0;
- ndacl_ptr->num_aces = 0;
-
- rc = set_chmod_dacl(ndacl_ptr, owner_sid_ptr, group_sid_ptr, nmode);
-
- sidsoffset = ndacloffset + le16_to_cpu(ndacl_ptr->size);
-
- /* copy security descriptor control portion and owner and group sid */
- copy_sec_desc(pntsd, pnntsd, sidsoffset);
+ rc = set_chmod_dacl(ndacl_ptr, owner_sid_ptr, group_sid_ptr,
+ nmode);
+ sidsoffset = ndacloffset + le16_to_cpu(ndacl_ptr->size);
+ /* copy sec desc control portion & owner and group sids */
+ copy_sec_desc(pntsd, pnntsd, sidsoffset);
+ *aclflag = CIFS_ACL_DACL;
+ } else {
+ memcpy(pnntsd, pntsd, secdesclen);
+ if (uid != NO_CHANGE_32) { /* chown */
+ owner_sid_ptr = (struct cifs_sid *)((char *)pnntsd +
+ le32_to_cpu(pnntsd->osidoffset));
+ nowner_sid_ptr = kmalloc(sizeof(struct cifs_sid),
+ GFP_KERNEL);
+ if (!nowner_sid_ptr)
+ return -ENOMEM;
+ rc = id_to_sid(uid, SIDOWNER, nowner_sid_ptr);
+ if (rc) {
+ cFYI(1, "%s: Mapping error %d for owner id %d",
+ __func__, rc, uid);
+ kfree(nowner_sid_ptr);
+ return rc;
+ }
+ memcpy(owner_sid_ptr, nowner_sid_ptr,
+ sizeof(struct cifs_sid));
+ kfree(nowner_sid_ptr);
+ *aclflag = CIFS_ACL_OWNER;
+ }
+ if (gid != NO_CHANGE_32) { /* chgrp */
+ group_sid_ptr = (struct cifs_sid *)((char *)pnntsd +
+ le32_to_cpu(pnntsd->gsidoffset));
+ ngroup_sid_ptr = kmalloc(sizeof(struct cifs_sid),
+ GFP_KERNEL);
+ if (!ngroup_sid_ptr)
+ return -ENOMEM;
+ rc = id_to_sid(gid, SIDGROUP, ngroup_sid_ptr);
+ if (rc) {
+ cFYI(1, "%s: Mapping error %d for group id %d",
+ __func__, rc, gid);
+ kfree(ngroup_sid_ptr);
+ return rc;
+ }
+ memcpy(group_sid_ptr, ngroup_sid_ptr,
+ sizeof(struct cifs_sid));
+ kfree(ngroup_sid_ptr);
+ *aclflag = CIFS_ACL_GROUP;
+ }
+ }
return rc;
}
@@ -945,7 +1173,7 @@
{
struct cifs_ntsd *pntsd = NULL;
int oplock = 0;
- int xid, rc;
+ int xid, rc, create_options = 0;
__u16 fid;
struct cifs_tcon *tcon;
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
@@ -956,9 +1184,12 @@
tcon = tlink_tcon(tlink);
xid = GetXid();
- rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, READ_CONTROL, 0,
- &fid, &oplock, NULL, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (backup_cred(cifs_sb))
+ create_options |= CREATE_OPEN_BACKUP_INTENT;
+
+ rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, READ_CONTROL,
+ create_options, &fid, &oplock, NULL, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
if (!rc) {
rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
CIFSSMBClose(xid, tcon, fid);
@@ -991,13 +1222,15 @@
return pntsd;
}
-static int set_cifs_acl_by_path(struct cifs_sb_info *cifs_sb, const char *path,
- struct cifs_ntsd *pnntsd, u32 acllen)
+ /* Set an ACL on the server */
+int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
+ struct inode *inode, const char *path, int aclflag)
{
int oplock = 0;
- int xid, rc;
+ int xid, rc, access_flags, create_options = 0;
__u16 fid;
struct cifs_tcon *tcon;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
if (IS_ERR(tlink))
@@ -1006,15 +1239,23 @@
tcon = tlink_tcon(tlink);
xid = GetXid();
- rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, WRITE_DAC, 0,
- &fid, &oplock, NULL, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (backup_cred(cifs_sb))
+ create_options |= CREATE_OPEN_BACKUP_INTENT;
+
+ if (aclflag == CIFS_ACL_OWNER || aclflag == CIFS_ACL_GROUP)
+ access_flags = WRITE_OWNER;
+ else
+ access_flags = WRITE_DAC;
+
+ rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, access_flags,
+ create_options, &fid, &oplock, NULL, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc) {
cERROR(1, "Unable to open file to set ACL");
goto out;
}
- rc = CIFSSMBSetCIFSACL(xid, tcon, fid, pnntsd, acllen);
+ rc = CIFSSMBSetCIFSACL(xid, tcon, fid, pnntsd, acllen, aclflag);
cFYI(DBG2, "SetCIFSACL rc = %d", rc);
CIFSSMBClose(xid, tcon, fid);
@@ -1024,17 +1265,6 @@
return rc;
}
-/* Set an ACL on the server */
-int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
- struct inode *inode, const char *path)
-{
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-
- cFYI(DBG2, "set ACL for %s from mode 0x%x", path, inode->i_mode);
-
- return set_cifs_acl_by_path(cifs_sb, path, pnntsd, acllen);
-}
-
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
int
cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
@@ -1066,9 +1296,12 @@
}
/* Convert mode bits to an ACL so we can update the ACL on the server */
-int mode_to_cifs_acl(struct inode *inode, const char *path, __u64 nmode)
+int
+id_mode_to_cifs_acl(struct inode *inode, const char *path, __u64 nmode,
+ uid_t uid, gid_t gid)
{
int rc = 0;
+ int aclflag = CIFS_ACL_DACL; /* default flag to set */
__u32 secdesclen = 0;
struct cifs_ntsd *pntsd = NULL; /* acl obtained from server */
struct cifs_ntsd *pnntsd = NULL; /* modified acl to be sent to server */
@@ -1098,13 +1331,15 @@
return -ENOMEM;
}
- rc = build_sec_desc(pntsd, pnntsd, inode, nmode);
+ rc = build_sec_desc(pntsd, pnntsd, secdesclen, nmode, uid, gid,
+ &aclflag);
cFYI(DBG2, "build_sec_desc rc: %d", rc);
if (!rc) {
/* Set the security descriptor */
- rc = set_cifs_acl(pnntsd, secdesclen, inode, path);
+ rc = set_cifs_acl(pnntsd, secdesclen, inode,
+ path, aclflag);
cFYI(DBG2, "set_cifs_acl rc: %d", rc);
}
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 30acd22..2cfb695 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -37,83 +37,8 @@
* the sequence number before this function is called. Also, this function
* should be called with the server->srv_mutex held.
*/
-static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu,
- struct TCP_Server_Info *server, char *signature)
-{
- int rc;
-
- if (cifs_pdu == NULL || signature == NULL || server == NULL)
- return -EINVAL;
-
- if (!server->secmech.sdescmd5) {
- cERROR(1, "%s: Can't generate signature\n", __func__);
- return -1;
- }
-
- rc = crypto_shash_init(&server->secmech.sdescmd5->shash);
- if (rc) {
- cERROR(1, "%s: Could not init md5\n", __func__);
- return rc;
- }
-
- rc = crypto_shash_update(&server->secmech.sdescmd5->shash,
- server->session_key.response, server->session_key.len);
- if (rc) {
- cERROR(1, "%s: Could not update with response\n", __func__);
- return rc;
- }
-
- rc = crypto_shash_update(&server->secmech.sdescmd5->shash,
- cifs_pdu->Protocol, be32_to_cpu(cifs_pdu->smb_buf_length));
- if (rc) {
- cERROR(1, "%s: Could not update with payload\n", __func__);
- return rc;
- }
-
- rc = crypto_shash_final(&server->secmech.sdescmd5->shash, signature);
- if (rc)
- cERROR(1, "%s: Could not generate md5 hash\n", __func__);
-
- return rc;
-}
-
-/* must be called with server->srv_mutex held */
-int cifs_sign_smb(struct smb_hdr *cifs_pdu, struct TCP_Server_Info *server,
- __u32 *pexpected_response_sequence_number)
-{
- int rc = 0;
- char smb_signature[20];
-
- if ((cifs_pdu == NULL) || (server == NULL))
- return -EINVAL;
-
- if (!(cifs_pdu->Flags2 & SMBFLG2_SECURITY_SIGNATURE) ||
- server->tcpStatus == CifsNeedNegotiate)
- return rc;
-
- if (!server->session_estab) {
- strncpy(cifs_pdu->Signature.SecuritySignature, "BSRSPYL", 8);
- return rc;
- }
-
- cifs_pdu->Signature.Sequence.SequenceNumber =
- cpu_to_le32(server->sequence_number);
- cifs_pdu->Signature.Sequence.Reserved = 0;
-
- *pexpected_response_sequence_number = server->sequence_number++;
- server->sequence_number++;
-
- rc = cifs_calculate_signature(cifs_pdu, server, smb_signature);
- if (rc)
- memset(cifs_pdu->Signature.SecuritySignature, 0, 8);
- else
- memcpy(cifs_pdu->Signature.SecuritySignature, smb_signature, 8);
-
- return rc;
-}
-
-static int cifs_calc_signature2(const struct kvec *iov, int n_vec,
- struct TCP_Server_Info *server, char *signature)
+static int cifs_calc_signature(const struct kvec *iov, int n_vec,
+ struct TCP_Server_Info *server, char *signature)
{
int i;
int rc;
@@ -179,7 +104,7 @@
{
int rc = 0;
char smb_signature[20];
- struct smb_hdr *cifs_pdu = iov[0].iov_base;
+ struct smb_hdr *cifs_pdu = (struct smb_hdr *)iov[0].iov_base;
if ((cifs_pdu == NULL) || (server == NULL))
return -EINVAL;
@@ -189,7 +114,7 @@
return rc;
if (!server->session_estab) {
- strncpy(cifs_pdu->Signature.SecuritySignature, "BSRSPYL", 8);
+ memcpy(cifs_pdu->Signature.SecuritySignature, "BSRSPYL", 8);
return rc;
}
@@ -200,7 +125,7 @@
*pexpected_response_sequence_number = server->sequence_number++;
server->sequence_number++;
- rc = cifs_calc_signature2(iov, n_vec, server, smb_signature);
+ rc = cifs_calc_signature(iov, n_vec, server, smb_signature);
if (rc)
memset(cifs_pdu->Signature.SecuritySignature, 0, 8);
else
@@ -209,13 +134,27 @@
return rc;
}
-int cifs_verify_signature(struct smb_hdr *cifs_pdu,
+/* must be called with server->srv_mutex held */
+int cifs_sign_smb(struct smb_hdr *cifs_pdu, struct TCP_Server_Info *server,
+ __u32 *pexpected_response_sequence_number)
+{
+ struct kvec iov;
+
+ iov.iov_base = cifs_pdu;
+ iov.iov_len = be32_to_cpu(cifs_pdu->smb_buf_length) + 4;
+
+ return cifs_sign_smb2(&iov, 1, server,
+ pexpected_response_sequence_number);
+}
+
+int cifs_verify_signature(struct kvec *iov, unsigned int nr_iov,
struct TCP_Server_Info *server,
__u32 expected_sequence_number)
{
unsigned int rc;
char server_response_sig[8];
char what_we_think_sig_should_be[20];
+ struct smb_hdr *cifs_pdu = (struct smb_hdr *)iov[0].iov_base;
if (cifs_pdu == NULL || server == NULL)
return -EINVAL;
@@ -247,8 +186,8 @@
cifs_pdu->Signature.Sequence.Reserved = 0;
mutex_lock(&server->srv_mutex);
- rc = cifs_calculate_signature(cifs_pdu, server,
- what_we_think_sig_should_be);
+ rc = cifs_calc_signature(iov, nr_iov, server,
+ what_we_think_sig_should_be);
mutex_unlock(&server->srv_mutex);
if (rc)
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 54b8f1e..8f1fe32 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -53,7 +53,7 @@
int cifsFYI = 0;
int cifsERROR = 1;
int traceSMB = 0;
-unsigned int oplockEnabled = 1;
+bool enable_oplocks = true;
unsigned int linuxExtEnabled = 1;
unsigned int lookupCacheEnabled = 1;
unsigned int multiuser_mount = 0;
@@ -74,7 +74,7 @@
MODULE_PARM_DESC(cifs_min_small, "Small network buffers in pool. Default: 30 "
"Range: 2 to 256");
unsigned int cifs_max_pending = CIFS_MAX_REQ;
-module_param(cifs_max_pending, int, 0);
+module_param(cifs_max_pending, int, 0444);
MODULE_PARM_DESC(cifs_max_pending, "Simultaneous requests to server. "
"Default: 50 Range: 2 to 256");
unsigned short echo_retries = 5;
@@ -82,6 +82,10 @@
MODULE_PARM_DESC(echo_retries, "Number of echo attempts before giving up and "
"reconnecting server. Default: 5. 0 means "
"never reconnect.");
+module_param(enable_oplocks, bool, 0644);
+MODULE_PARM_DESC(enable_oplocks, "Enable or disable oplocks (bool). Default:"
+ "y/Y/1");
+
extern mempool_t *cifs_sm_req_poolp;
extern mempool_t *cifs_req_poolp;
extern mempool_t *cifs_mid_poolp;
@@ -132,12 +136,12 @@
else
sb->s_d_op = &cifs_dentry_ops;
-#ifdef CIFS_NFSD_EXPORT
+#ifdef CONFIG_CIFS_NFSD_EXPORT
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
cFYI(1, "export ops supported");
sb->s_export_op = &cifs_export_ops;
}
-#endif /* CIFS_NFSD_EXPORT */
+#endif /* CONFIG_CIFS_NFSD_EXPORT */
return 0;
@@ -432,6 +436,12 @@
seq_printf(s, ",mfsymlinks");
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE)
seq_printf(s, ",fsc");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOSSYNC)
+ seq_printf(s, ",nostrictsync");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM)
+ seq_printf(s, ",noperm");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_STRICT_IO)
+ seq_printf(s, ",strictcache");
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
@@ -530,7 +540,6 @@
char *full_path = NULL;
char *s, *p;
char sep;
- int xid;
full_path = cifs_build_path_to_root(vol, cifs_sb,
cifs_sb_master_tcon(cifs_sb));
@@ -539,7 +548,6 @@
cFYI(1, "Get root dentry for %s", full_path);
- xid = GetXid();
sep = CIFS_DIR_SEP(cifs_sb);
dentry = dget(sb->s_root);
p = s = full_path;
@@ -570,7 +578,6 @@
dput(dentry);
dentry = child;
} while (!IS_ERR(dentry));
- _FreeXid(xid);
kfree(full_path);
return dentry;
}
@@ -723,7 +730,7 @@
if (rc < 0)
return (loff_t)rc;
}
- return generic_file_llseek_unlocked(file, offset, origin);
+ return generic_file_llseek(file, offset, origin);
}
static int cifs_setlease(struct file *file, long arg, struct file_lock **lease)
@@ -942,7 +949,8 @@
struct cifsInodeInfo *cifsi = inode;
inode_init_once(&cifsi->vfs_inode);
- INIT_LIST_HEAD(&cifsi->lockList);
+ INIT_LIST_HEAD(&cifsi->llist);
+ mutex_init(&cifsi->lock_mutex);
}
static int
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 95da802..d9dbaf8 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -121,9 +121,9 @@
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
-#ifdef CIFS_NFSD_EXPORT
+#ifdef CONFIG_CIFS_NFSD_EXPORT
extern const struct export_operations cifs_export_ops;
-#endif /* CIFS_NFSD_EXPORT */
+#endif /* CONFIG_CIFS_NFSD_EXPORT */
#define CIFS_VERSION "1.75"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 95dad9d..8238aa1 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -167,6 +167,8 @@
uid_t cred_uid;
uid_t linux_uid;
gid_t linux_gid;
+ uid_t backupuid;
+ gid_t backupgid;
mode_t file_mode;
mode_t dir_mode;
unsigned secFlg;
@@ -179,6 +181,8 @@
bool noperm:1;
bool no_psx_acl:1; /* set if posix acl support should be disabled */
bool cifs_acl:1;
+ bool backupuid_specified; /* mount option backupuid is specified */
+ bool backupgid_specified; /* mount option backupgid is specified */
bool no_xattr:1; /* set if xattr (EA) support should be disabled*/
bool server_ino:1; /* use inode numbers from server ie UniqueId */
bool direct_io:1;
@@ -219,7 +223,8 @@
CIFS_MOUNT_OVERR_GID | CIFS_MOUNT_DYNPERM | \
CIFS_MOUNT_NOPOSIXBRL | CIFS_MOUNT_NOSSYNC | \
CIFS_MOUNT_FSCACHE | CIFS_MOUNT_MF_SYMLINKS | \
- CIFS_MOUNT_MULTIUSER | CIFS_MOUNT_STRICT_IO)
+ CIFS_MOUNT_MULTIUSER | CIFS_MOUNT_STRICT_IO | \
+ CIFS_MOUNT_CIFS_BACKUPUID | CIFS_MOUNT_CIFS_BACKUPGID)
#define CIFS_MS_MASK (MS_RDONLY | MS_MANDLOCK | MS_NOEXEC | MS_NOSUID | \
MS_NODEV | MS_SYNCHRONOUS)
@@ -286,7 +291,13 @@
bool sec_kerberosu2u; /* supports U2U Kerberos */
bool sec_kerberos; /* supports plain Kerberos */
bool sec_mskerberos; /* supports legacy MS Kerberos */
+ bool large_buf; /* is current buffer large? */
struct delayed_work echo; /* echo ping workqueue job */
+ struct kvec *iov; /* reusable kvec array for receives */
+ unsigned int nr_iov; /* number of kvecs in array */
+ char *smallbuf; /* pointer to current "small" buffer */
+ char *bigbuf; /* pointer to current "big" buffer */
+ unsigned int total_read; /* total amount of data read in this pass */
#ifdef CONFIG_CIFS_FSCACHE
struct fscache_cookie *fscache; /* client index cache cookie */
#endif
@@ -485,9 +496,13 @@
*/
struct cifsLockInfo {
struct list_head llist; /* pointer to next cifsLockInfo */
+ struct list_head blist; /* pointer to locks blocked on this */
+ wait_queue_head_t block_q;
__u64 offset;
__u64 length;
+ __u32 pid;
__u8 type;
+ __u16 netfid;
};
/*
@@ -520,8 +535,6 @@
struct dentry *dentry;
unsigned int f_flags;
struct tcon_link *tlink;
- struct mutex lock_mutex;
- struct list_head llist; /* list of byte range locks we have. */
bool invalidHandle:1; /* file closed via session abend */
bool oplock_break_cancelled:1;
int count; /* refcount protected by cifs_file_list_lock */
@@ -554,7 +567,9 @@
*/
struct cifsInodeInfo {
- struct list_head lockList;
+ struct list_head llist; /* brlocks for this inode */
+ bool can_cache_brlcks;
+ struct mutex lock_mutex; /* protect two fields above */
/* BB add in lists for dirty pages i.e. write caching info for oplock */
struct list_head openFileList;
__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
@@ -643,8 +658,24 @@
struct mid_q_entry;
/*
- * This is the prototype for the mid callback function. When creating one,
- * take special care to avoid deadlocks. Things to bear in mind:
+ * This is the prototype for the mid receive function. This function is for
+ * receiving the rest of the SMB frame, starting with the WordCount (which is
+ * just after the MID in struct smb_hdr). Note:
+ *
+ * - This will be called by cifsd, with no locks held.
+ * - The mid will still be on the pending_mid_q.
+ * - mid->resp_buf will point to the current buffer.
+ *
+ * Returns zero on a successful receive, or an error. The receive state in
+ * the TCP_Server_Info will also be updated.
+ */
+typedef int (mid_receive_t)(struct TCP_Server_Info *server,
+ struct mid_q_entry *mid);
+
+/*
+ * This is the prototype for the mid callback function. This is called once the
+ * mid has been received off of the socket. When creating one, take special
+ * care to avoid deadlocks. Things to bear in mind:
*
* - it will be called by cifsd, with no locks held
* - the mid will be removed from any lists
@@ -662,9 +693,10 @@
unsigned long when_sent; /* time when smb send finished */
unsigned long when_received; /* when demux complete (taken off wire) */
#endif
+ mid_receive_t *receive; /* call receive callback */
mid_callback_t *callback; /* call completion callback */
void *callback_data; /* general purpose pointer for callback */
- struct smb_hdr *resp_buf; /* response buffer */
+ struct smb_hdr *resp_buf; /* pointer to received SMB header */
int midState; /* wish this were enum but can not pass to wait_event */
__u8 command; /* smb command code */
bool largeBuf:1; /* if valid response, is pointer to large buf */
@@ -964,7 +996,8 @@
to be established on existing mount if we
have the uid/password or Kerberos credential
or equivalent for current user */
-GLOBAL_EXTERN unsigned int oplockEnabled;
+/* enable or disable oplocks */
+GLOBAL_EXTERN bool enable_oplocks;
GLOBAL_EXTERN unsigned int lookupCacheEnabled;
GLOBAL_EXTERN unsigned int global_secflags; /* if on, session setup sent
with more secure ntlmssp2 challenge/resp */
@@ -978,10 +1011,16 @@
/* reconnect after this many failed echo attempts */
GLOBAL_EXTERN unsigned short echo_retries;
+#ifdef CONFIG_CIFS_ACL
GLOBAL_EXTERN struct rb_root uidtree;
GLOBAL_EXTERN struct rb_root gidtree;
GLOBAL_EXTERN spinlock_t siduidlock;
GLOBAL_EXTERN spinlock_t sidgidlock;
+GLOBAL_EXTERN struct rb_root siduidtree;
+GLOBAL_EXTERN struct rb_root sidgidtree;
+GLOBAL_EXTERN spinlock_t uidsidlock;
+GLOBAL_EXTERN spinlock_t gidsidlock;
+#endif /* CONFIG_CIFS_ACL */
void cifs_oplock_break(struct work_struct *work);
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index de3aa28..3fb03e2 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -1089,9 +1089,7 @@
__le16 DataLengthHigh;
__u64 Reserved2;
__u16 ByteCount;
- __u8 Pad; /* BB check for whether padded to DWORD
- boundary and optimum performance here */
- char Data[1];
+ /* read response data immediately follows */
} __attribute__((packed)) READ_RSP;
typedef struct locking_andx_range {
@@ -1913,6 +1911,10 @@
/* SETFSInfo Levels */
#define SMB_SET_CIFS_UNIX_INFO 0x200
+/* level 0x203 is defined above in list of QFS info levels */
+/* #define SMB_REQUEST_TRANSPORT_ENCRYPTION 0x203 */
+
+/* Level 0x200 request structure follows */
typedef struct smb_com_transaction2_setfsi_req {
struct smb_hdr hdr; /* wct = 15 */
__le16 TotalParameterCount;
@@ -1940,13 +1942,39 @@
__le64 ClientUnixCap; /* Data end */
} __attribute__((packed)) TRANSACTION2_SETFSI_REQ;
+/* level 0x203 request structure follows */
+typedef struct smb_com_transaction2_setfs_enc_req {
+ struct smb_hdr hdr; /* wct = 15 */
+ __le16 TotalParameterCount;
+ __le16 TotalDataCount;
+ __le16 MaxParameterCount;
+ __le16 MaxDataCount;
+ __u8 MaxSetupCount;
+ __u8 Reserved;
+ __le16 Flags;
+ __le32 Timeout;
+ __u16 Reserved2;
+ __le16 ParameterCount; /* 4 */
+ __le16 ParameterOffset;
+ __le16 DataCount; /* 12 */
+ __le16 DataOffset;
+ __u8 SetupCount; /* one */
+ __u8 Reserved3;
+ __le16 SubCommand; /* TRANS2_SET_FS_INFORMATION */
+ __le16 ByteCount;
+ __u8 Pad;
+ __u16 Reserved4; /* Parameters start. */
+ __le16 InformationLevel;/* Parameters end. */
+ /* NTLMSSP Blob, Data start. */
+} __attribute__((packed)) TRANSACTION2_SETFSI_ENC_REQ;
+
+/* response for setfsinfo levels 0x200 and 0x203 */
typedef struct smb_com_transaction2_setfsi_rsp {
struct smb_hdr hdr; /* wct = 10 */
struct trans2_resp t2;
__u16 ByteCount;
} __attribute__((packed)) TRANSACTION2_SETFSI_RSP;
-
typedef struct smb_com_transaction2_get_dfs_refer_req {
struct smb_hdr hdr; /* wct = 15 */
__le16 TotalParameterCount;
@@ -2098,13 +2126,13 @@
#define CIFS_UNIX_PROXY_CAP 0x00000400 /* Proxy cap: 0xACE ioctl and
QFS PROXY call */
#ifdef CONFIG_CIFS_POSIX
-/* Can not set pathnames cap yet until we send new posix create SMB since
- otherwise server can treat such handles opened with older ntcreatex
- (by a new client which knows how to send posix path ops)
- as non-posix handles (can affect write behavior with byte range locks.
- We can add back in POSIX_PATH_OPS cap when Posix Create/Mkdir finished */
+/* presumably don't need the 0x20 POSIX_PATH_OPS_CAP since we never send
+ LockingX instead of posix locking call on unix sess (and we do not expect
+ LockingX to use different (ie Windows) semantics than posix locking on
+ the same session (if WINE needs to do this later, we can add this cap
+ back in later */
/* #define CIFS_UNIX_CAP_MASK 0x000000fb */
-#define CIFS_UNIX_CAP_MASK 0x000000db
+#define CIFS_UNIX_CAP_MASK 0x000003db
#else
#define CIFS_UNIX_CAP_MASK 0x00000013
#endif /* CONFIG_CIFS_POSIX */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 8df28e9..ef4f631 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -69,8 +69,9 @@
struct TCP_Server_Info *server);
extern void DeleteMidQEntry(struct mid_q_entry *midEntry);
extern int cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov,
- unsigned int nvec, mid_callback_t *callback,
- void *cbdata, bool ignore_pend);
+ unsigned int nvec, mid_receive_t *receive,
+ mid_callback_t *callback, void *cbdata,
+ bool ignore_pend);
extern int SendReceive(const unsigned int /* xid */ , struct cifs_ses *,
struct smb_hdr * /* input */ ,
struct smb_hdr * /* out */ ,
@@ -90,6 +91,7 @@
extern int checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length);
extern bool is_valid_oplock_break(struct smb_hdr *smb,
struct TCP_Server_Info *);
+extern bool backup_cred(struct cifs_sb_info *);
extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
extern void cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
unsigned int bytes_written);
@@ -145,12 +147,19 @@
extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
struct cifs_fattr *fattr, struct inode *inode,
const char *path, const __u16 *pfid);
-extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64);
+extern int id_mode_to_cifs_acl(struct inode *inode, const char *path, __u64,
+ uid_t, gid_t);
extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
const char *, u32 *);
extern int set_cifs_acl(struct cifs_ntsd *, __u32, struct inode *,
- const char *);
+ const char *, int);
+extern void dequeue_mid(struct mid_q_entry *mid, bool malformed);
+extern int cifs_read_from_socket(struct TCP_Server_Info *server, char *buf,
+ unsigned int to_read);
+extern int cifs_readv_from_socket(struct TCP_Server_Info *server,
+ struct kvec *iov_orig, unsigned int nr_segs,
+ unsigned int to_read);
extern void cifs_setup_cifs_sb(struct smb_vol *pvolume_info,
struct cifs_sb_info *cifs_sb);
extern int cifs_match_super(struct super_block *, void *);
@@ -359,14 +368,17 @@
const struct nls_table *nls_codepage,
int remap_special_chars);
+extern int cifs_lockv(const int xid, struct cifs_tcon *tcon, const __u16 netfid,
+ const __u8 lock_type, const __u32 num_unlock,
+ const __u32 num_lock, LOCKING_ANDX_RANGE *buf);
extern int CIFSSMBLock(const int xid, struct cifs_tcon *tcon,
- const __u16 netfid, const __u64 len,
+ const __u16 netfid, const __u32 netpid, const __u64 len,
const __u64 offset, const __u32 numUnlock,
const __u32 numLock, const __u8 lockType,
const bool waitFlag, const __u8 oplock_level);
extern int CIFSSMBPosixLock(const int xid, struct cifs_tcon *tcon,
- const __u16 smb_file_id, const int get_flag,
- const __u64 len, struct file_lock *,
+ const __u16 smb_file_id, const __u32 netpid,
+ const int get_flag, const __u64 len, struct file_lock *,
const __u16 lock_type, const bool waitFlag);
extern int CIFSSMBTDis(const int xid, struct cifs_tcon *tcon);
extern int CIFSSMBEcho(struct TCP_Server_Info *server);
@@ -380,7 +392,7 @@
extern int cifs_sign_smb(struct smb_hdr *, struct TCP_Server_Info *, __u32 *);
extern int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *,
__u32 *);
-extern int cifs_verify_signature(struct smb_hdr *,
+extern int cifs_verify_signature(struct kvec *iov, unsigned int nr_iov,
struct TCP_Server_Info *server,
__u32 expected_sequence_number);
extern int SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *);
@@ -419,7 +431,7 @@
extern int CIFSSMBGetCIFSACL(const int xid, struct cifs_tcon *tcon,
__u16 fid, struct cifs_ntsd **acl_inf, __u32 *buflen);
extern int CIFSSMBSetCIFSACL(const int, struct cifs_tcon *, __u16,
- struct cifs_ntsd *, __u32);
+ struct cifs_ntsd *, __u32, int);
extern int CIFSSMBGetPosixACL(const int xid, struct cifs_tcon *tcon,
const unsigned char *searchName,
char *acl_inf, const int buflen, const int acl_type,
@@ -440,6 +452,24 @@
extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8,
unsigned char *p24);
+/* asynchronous read support */
+struct cifs_readdata {
+ struct cifsFileInfo *cfile;
+ struct address_space *mapping;
+ __u64 offset;
+ unsigned int bytes;
+ pid_t pid;
+ int result;
+ struct list_head pages;
+ struct work_struct work;
+ unsigned int nr_iov;
+ struct kvec iov[1];
+};
+
+struct cifs_readdata *cifs_readdata_alloc(unsigned int nr_pages);
+void cifs_readdata_free(struct cifs_readdata *rdata);
+int cifs_async_readv(struct cifs_readdata *rdata);
+
/* asynchronous write support */
struct cifs_writedata {
struct kref refcount;
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a80f7bd9..6600aa2 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -33,6 +33,8 @@
#include <linux/slab.h>
#include <linux/posix_acl_xattr.h>
#include <linux/pagemap.h>
+#include <linux/swap.h>
+#include <linux/task_io_accounting_ops.h>
#include <asm/uaccess.h>
#include "cifspdu.h"
#include "cifsglob.h"
@@ -40,6 +42,7 @@
#include "cifsproto.h"
#include "cifs_unicode.h"
#include "cifs_debug.h"
+#include "fscache.h"
#ifdef CONFIG_CIFS_POSIX
static struct {
@@ -83,6 +86,9 @@
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
+/* Forward declarations */
+static void cifs_readv_complete(struct work_struct *work);
+
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
static void mark_open_files_invalid(struct cifs_tcon *pTcon)
@@ -453,8 +459,7 @@
}
server->sec_mode = (__u8)le16_to_cpu(rsp->SecurityMode);
server->maxReq = le16_to_cpu(rsp->MaxMpxCount);
- server->maxBuf = min((__u32)le16_to_cpu(rsp->MaxBufSize),
- (__u32)CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
+ server->maxBuf = le16_to_cpu(rsp->MaxBufSize);
server->max_vcs = le16_to_cpu(rsp->MaxNumberVcs);
/* even though we do not use raw we might as well set this
accurately, in case we ever find a need for it */
@@ -561,8 +566,7 @@
little endian */
server->maxReq = le16_to_cpu(pSMBr->MaxMpxCount);
/* probably no need to store and check maxvcs */
- server->maxBuf = min(le32_to_cpu(pSMBr->MaxBufferSize),
- (__u32) CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
+ server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
server->max_rw = le32_to_cpu(pSMBr->MaxRawSize);
cFYI(DBG2, "Max buf = %d", ses->server->maxBuf);
server->capabilities = le32_to_cpu(pSMBr->Capabilities);
@@ -739,7 +743,8 @@
iov.iov_base = smb;
iov.iov_len = be32_to_cpu(smb->hdr.smb_buf_length) + 4;
- rc = cifs_call_async(server, &iov, 1, cifs_echo_callback, server, true);
+ rc = cifs_call_async(server, &iov, 1, NULL, cifs_echo_callback,
+ server, true);
if (rc)
cFYI(1, "Echo request failed: %d", rc);
@@ -1376,6 +1381,359 @@
return rc;
}
+struct cifs_readdata *
+cifs_readdata_alloc(unsigned int nr_pages)
+{
+ struct cifs_readdata *rdata;
+
+ /* readdata + 1 kvec for each page */
+ rdata = kzalloc(sizeof(*rdata) +
+ sizeof(struct kvec) * nr_pages, GFP_KERNEL);
+ if (rdata != NULL) {
+ INIT_WORK(&rdata->work, cifs_readv_complete);
+ INIT_LIST_HEAD(&rdata->pages);
+ }
+ return rdata;
+}
+
+void
+cifs_readdata_free(struct cifs_readdata *rdata)
+{
+ cifsFileInfo_put(rdata->cfile);
+ kfree(rdata);
+}
+
+/*
+ * Discard any remaining data in the current SMB. To do this, we borrow the
+ * current bigbuf.
+ */
+static int
+cifs_readv_discard(struct TCP_Server_Info *server, struct mid_q_entry *mid)
+{
+ READ_RSP *rsp = (READ_RSP *)server->smallbuf;
+ unsigned int rfclen = be32_to_cpu(rsp->hdr.smb_buf_length);
+ int remaining = rfclen + 4 - server->total_read;
+ struct cifs_readdata *rdata = mid->callback_data;
+
+ while (remaining > 0) {
+ int length;
+
+ length = cifs_read_from_socket(server, server->bigbuf,
+ min_t(unsigned int, remaining,
+ CIFSMaxBufSize + MAX_CIFS_HDR_SIZE));
+ if (length < 0)
+ return length;
+ server->total_read += length;
+ remaining -= length;
+ }
+
+ dequeue_mid(mid, rdata->result);
+ return 0;
+}
+
+static int
+cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid)
+{
+ int length, len;
+ unsigned int data_offset, remaining, data_len;
+ struct cifs_readdata *rdata = mid->callback_data;
+ READ_RSP *rsp = (READ_RSP *)server->smallbuf;
+ unsigned int rfclen = be32_to_cpu(rsp->hdr.smb_buf_length) + 4;
+ u64 eof;
+ pgoff_t eof_index;
+ struct page *page, *tpage;
+
+ cFYI(1, "%s: mid=%u offset=%llu bytes=%u", __func__,
+ mid->mid, rdata->offset, rdata->bytes);
+
+ /*
+ * read the rest of READ_RSP header (sans Data array), or whatever we
+ * can if there's not enough data. At this point, we've read down to
+ * the Mid.
+ */
+ len = min_t(unsigned int, rfclen, sizeof(*rsp)) -
+ sizeof(struct smb_hdr) + 1;
+
+ rdata->iov[0].iov_base = server->smallbuf + sizeof(struct smb_hdr) - 1;
+ rdata->iov[0].iov_len = len;
+
+ length = cifs_readv_from_socket(server, rdata->iov, 1, len);
+ if (length < 0)
+ return length;
+ server->total_read += length;
+
+ /* Was the SMB read successful? */
+ rdata->result = map_smb_to_linux_error(&rsp->hdr, false);
+ if (rdata->result != 0) {
+ cFYI(1, "%s: server returned error %d", __func__,
+ rdata->result);
+ return cifs_readv_discard(server, mid);
+ }
+
+ /* Is there enough to get to the rest of the READ_RSP header? */
+ if (server->total_read < sizeof(READ_RSP)) {
+ cFYI(1, "%s: server returned short header. got=%u expected=%zu",
+ __func__, server->total_read, sizeof(READ_RSP));
+ rdata->result = -EIO;
+ return cifs_readv_discard(server, mid);
+ }
+
+ data_offset = le16_to_cpu(rsp->DataOffset) + 4;
+ if (data_offset < server->total_read) {
+ /*
+ * win2k8 sometimes sends an offset of 0 when the read
+ * is beyond the EOF. Treat it as if the data starts just after
+ * the header.
+ */
+ cFYI(1, "%s: data offset (%u) inside read response header",
+ __func__, data_offset);
+ data_offset = server->total_read;
+ } else if (data_offset > MAX_CIFS_SMALL_BUFFER_SIZE) {
+ /* data_offset is beyond the end of smallbuf */
+ cFYI(1, "%s: data offset (%u) beyond end of smallbuf",
+ __func__, data_offset);
+ rdata->result = -EIO;
+ return cifs_readv_discard(server, mid);
+ }
+
+ cFYI(1, "%s: total_read=%u data_offset=%u", __func__,
+ server->total_read, data_offset);
+
+ len = data_offset - server->total_read;
+ if (len > 0) {
+ /* read any junk before data into the rest of smallbuf */
+ rdata->iov[0].iov_base = server->smallbuf + server->total_read;
+ rdata->iov[0].iov_len = len;
+ length = cifs_readv_from_socket(server, rdata->iov, 1, len);
+ if (length < 0)
+ return length;
+ server->total_read += length;
+ }
+
+ /* set up first iov for signature check */
+ rdata->iov[0].iov_base = server->smallbuf;
+ rdata->iov[0].iov_len = server->total_read;
+ cFYI(1, "0: iov_base=%p iov_len=%zu",
+ rdata->iov[0].iov_base, rdata->iov[0].iov_len);
+
+ /* how much data is in the response? */
+ data_len = le16_to_cpu(rsp->DataLengthHigh) << 16;
+ data_len += le16_to_cpu(rsp->DataLength);
+ if (data_offset + data_len > rfclen) {
+ /* data_len is corrupt -- discard frame */
+ rdata->result = -EIO;
+ return cifs_readv_discard(server, mid);
+ }
+
+ /* marshal up the page array */
+ len = 0;
+ remaining = data_len;
+ rdata->nr_iov = 1;
+
+ /* determine the eof that the server (probably) has */
+ eof = CIFS_I(rdata->mapping->host)->server_eof;
+ eof_index = eof ? (eof - 1) >> PAGE_CACHE_SHIFT : 0;
+ cFYI(1, "eof=%llu eof_index=%lu", eof, eof_index);
+
+ list_for_each_entry_safe(page, tpage, &rdata->pages, lru) {
+ if (remaining >= PAGE_CACHE_SIZE) {
+ /* enough data to fill the page */
+ rdata->iov[rdata->nr_iov].iov_base = kmap(page);
+ rdata->iov[rdata->nr_iov].iov_len = PAGE_CACHE_SIZE;
+ cFYI(1, "%u: idx=%lu iov_base=%p iov_len=%zu",
+ rdata->nr_iov, page->index,
+ rdata->iov[rdata->nr_iov].iov_base,
+ rdata->iov[rdata->nr_iov].iov_len);
+ ++rdata->nr_iov;
+ len += PAGE_CACHE_SIZE;
+ remaining -= PAGE_CACHE_SIZE;
+ } else if (remaining > 0) {
+ /* enough for partial page, fill and zero the rest */
+ rdata->iov[rdata->nr_iov].iov_base = kmap(page);
+ rdata->iov[rdata->nr_iov].iov_len = remaining;
+ cFYI(1, "%u: idx=%lu iov_base=%p iov_len=%zu",
+ rdata->nr_iov, page->index,
+ rdata->iov[rdata->nr_iov].iov_base,
+ rdata->iov[rdata->nr_iov].iov_len);
+ memset(rdata->iov[rdata->nr_iov].iov_base + remaining,
+ '\0', PAGE_CACHE_SIZE - remaining);
+ ++rdata->nr_iov;
+ len += remaining;
+ remaining = 0;
+ } else if (page->index > eof_index) {
+ /*
+ * The VFS will not try to do readahead past the
+ * i_size, but it's possible that we have outstanding
+ * writes with gaps in the middle and the i_size hasn't
+ * caught up yet. Populate those with zeroed out pages
+ * to prevent the VFS from repeatedly attempting to
+ * fill them until the writes are flushed.
+ */
+ zero_user(page, 0, PAGE_CACHE_SIZE);
+ list_del(&page->lru);
+ lru_cache_add_file(page);
+ flush_dcache_page(page);
+ SetPageUptodate(page);
+ unlock_page(page);
+ page_cache_release(page);
+ } else {
+ /* no need to hold page hostage */
+ list_del(&page->lru);
+ lru_cache_add_file(page);
+ unlock_page(page);
+ page_cache_release(page);
+ }
+ }
+
+ /* issue the read if we have any iovecs left to fill */
+ if (rdata->nr_iov > 1) {
+ length = cifs_readv_from_socket(server, &rdata->iov[1],
+ rdata->nr_iov - 1, len);
+ if (length < 0)
+ return length;
+ server->total_read += length;
+ } else {
+ length = 0;
+ }
+
+ rdata->bytes = length;
+
+ cFYI(1, "total_read=%u rfclen=%u remaining=%u", server->total_read,
+ rfclen, remaining);
+
+ /* discard anything left over */
+ if (server->total_read < rfclen)
+ return cifs_readv_discard(server, mid);
+
+ dequeue_mid(mid, false);
+ return length;
+}
+
+static void
+cifs_readv_complete(struct work_struct *work)
+{
+ struct cifs_readdata *rdata = container_of(work,
+ struct cifs_readdata, work);
+ struct page *page, *tpage;
+
+ list_for_each_entry_safe(page, tpage, &rdata->pages, lru) {
+ list_del(&page->lru);
+ lru_cache_add_file(page);
+
+ if (rdata->result == 0) {
+ kunmap(page);
+ flush_dcache_page(page);
+ SetPageUptodate(page);
+ }
+
+ unlock_page(page);
+
+ if (rdata->result == 0)
+ cifs_readpage_to_fscache(rdata->mapping->host, page);
+
+ page_cache_release(page);
+ }
+ cifs_readdata_free(rdata);
+}
+
+static void
+cifs_readv_callback(struct mid_q_entry *mid)
+{
+ struct cifs_readdata *rdata = mid->callback_data;
+ struct cifs_tcon *tcon = tlink_tcon(rdata->cfile->tlink);
+ struct TCP_Server_Info *server = tcon->ses->server;
+
+ cFYI(1, "%s: mid=%u state=%d result=%d bytes=%u", __func__,
+ mid->mid, mid->midState, rdata->result, rdata->bytes);
+
+ switch (mid->midState) {
+ case MID_RESPONSE_RECEIVED:
+ /* result already set, check signature */
+ if (server->sec_mode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
+ if (cifs_verify_signature(rdata->iov, rdata->nr_iov,
+ server, mid->sequence_number + 1))
+ cERROR(1, "Unexpected SMB signature");
+ }
+ /* FIXME: should this be counted toward the initiating task? */
+ task_io_account_read(rdata->bytes);
+ cifs_stats_bytes_read(tcon, rdata->bytes);
+ break;
+ case MID_REQUEST_SUBMITTED:
+ case MID_RETRY_NEEDED:
+ rdata->result = -EAGAIN;
+ break;
+ default:
+ rdata->result = -EIO;
+ }
+
+ queue_work(system_nrt_wq, &rdata->work);
+ DeleteMidQEntry(mid);
+ atomic_dec(&server->inFlight);
+ wake_up(&server->request_q);
+}
+
+/* cifs_async_readv - send an async write, and set up mid to handle result */
+int
+cifs_async_readv(struct cifs_readdata *rdata)
+{
+ int rc;
+ READ_REQ *smb = NULL;
+ int wct;
+ struct cifs_tcon *tcon = tlink_tcon(rdata->cfile->tlink);
+
+ cFYI(1, "%s: offset=%llu bytes=%u", __func__,
+ rdata->offset, rdata->bytes);
+
+ if (tcon->ses->capabilities & CAP_LARGE_FILES)
+ wct = 12;
+ else {
+ wct = 10; /* old style read */
+ if ((rdata->offset >> 32) > 0) {
+ /* can not handle this big offset for old */
+ return -EIO;
+ }
+ }
+
+ rc = small_smb_init(SMB_COM_READ_ANDX, wct, tcon, (void **)&smb);
+ if (rc)
+ return rc;
+
+ smb->hdr.Pid = cpu_to_le16((__u16)rdata->pid);
+ smb->hdr.PidHigh = cpu_to_le16((__u16)(rdata->pid >> 16));
+
+ smb->AndXCommand = 0xFF; /* none */
+ smb->Fid = rdata->cfile->netfid;
+ smb->OffsetLow = cpu_to_le32(rdata->offset & 0xFFFFFFFF);
+ if (wct == 12)
+ smb->OffsetHigh = cpu_to_le32(rdata->offset >> 32);
+ smb->Remaining = 0;
+ smb->MaxCount = cpu_to_le16(rdata->bytes & 0xFFFF);
+ smb->MaxCountHigh = cpu_to_le32(rdata->bytes >> 16);
+ if (wct == 12)
+ smb->ByteCount = 0;
+ else {
+ /* old style read */
+ struct smb_com_readx_req *smbr =
+ (struct smb_com_readx_req *)smb;
+ smbr->ByteCount = 0;
+ }
+
+ /* 4 for RFC1001 length + 1 for BCC */
+ rdata->iov[0].iov_base = smb;
+ rdata->iov[0].iov_len = be32_to_cpu(smb->hdr.smb_buf_length) + 4;
+
+ rc = cifs_call_async(tcon->ses->server, rdata->iov, 1,
+ cifs_readv_receive, cifs_readv_callback,
+ rdata, false);
+
+ if (rc == 0)
+ cifs_stats_inc(&tcon->num_reads);
+
+ cifs_small_buf_release(smb);
+ return rc;
+}
+
int
CIFSSMBRead(const int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes,
char **buf, int *pbuf_type)
@@ -1836,7 +2194,7 @@
kref_get(&wdata->refcount);
rc = cifs_call_async(tcon->ses->server, iov, wdata->nr_pages + 1,
- cifs_writev_callback, wdata, false);
+ NULL, cifs_writev_callback, wdata, false);
if (rc == 0)
cifs_stats_inc(&tcon->num_writes);
@@ -1962,10 +2320,50 @@
return rc;
}
+int cifs_lockv(const int xid, struct cifs_tcon *tcon, const __u16 netfid,
+ const __u8 lock_type, const __u32 num_unlock,
+ const __u32 num_lock, LOCKING_ANDX_RANGE *buf)
+{
+ int rc = 0;
+ LOCK_REQ *pSMB = NULL;
+ struct kvec iov[2];
+ int resp_buf_type;
+ __u16 count;
+
+ cFYI(1, "cifs_lockv num lock %d num unlock %d", num_lock, num_unlock);
+
+ rc = small_smb_init(SMB_COM_LOCKING_ANDX, 8, tcon, (void **) &pSMB);
+ if (rc)
+ return rc;
+
+ pSMB->Timeout = 0;
+ pSMB->NumberOfLocks = cpu_to_le16(num_lock);
+ pSMB->NumberOfUnlocks = cpu_to_le16(num_unlock);
+ pSMB->LockType = lock_type;
+ pSMB->AndXCommand = 0xFF; /* none */
+ pSMB->Fid = netfid; /* netfid stays le */
+
+ count = (num_unlock + num_lock) * sizeof(LOCKING_ANDX_RANGE);
+ inc_rfc1001_len(pSMB, count);
+ pSMB->ByteCount = cpu_to_le16(count);
+
+ iov[0].iov_base = (char *)pSMB;
+ iov[0].iov_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 4 -
+ (num_unlock + num_lock) * sizeof(LOCKING_ANDX_RANGE);
+ iov[1].iov_base = (char *)buf;
+ iov[1].iov_len = (num_unlock + num_lock) * sizeof(LOCKING_ANDX_RANGE);
+
+ cifs_stats_inc(&tcon->num_locks);
+ rc = SendReceive2(xid, tcon->ses, iov, 2, &resp_buf_type, CIFS_NO_RESP);
+ if (rc)
+ cFYI(1, "Send error in cifs_lockv = %d", rc);
+
+ return rc;
+}
int
CIFSSMBLock(const int xid, struct cifs_tcon *tcon,
- const __u16 smb_file_id, const __u64 len,
+ const __u16 smb_file_id, const __u32 netpid, const __u64 len,
const __u64 offset, const __u32 numUnlock,
const __u32 numLock, const __u8 lockType,
const bool waitFlag, const __u8 oplock_level)
@@ -2001,7 +2399,7 @@
pSMB->Fid = smb_file_id; /* netfid stays le */
if ((numLock != 0) || (numUnlock != 0)) {
- pSMB->Locks[0].Pid = cpu_to_le16(current->tgid);
+ pSMB->Locks[0].Pid = cpu_to_le16(netpid);
/* BB where to store pid high? */
pSMB->Locks[0].LengthLow = cpu_to_le32((u32)len);
pSMB->Locks[0].LengthHigh = cpu_to_le32((u32)(len>>32));
@@ -2035,9 +2433,9 @@
int
CIFSSMBPosixLock(const int xid, struct cifs_tcon *tcon,
- const __u16 smb_file_id, const int get_flag, const __u64 len,
- struct file_lock *pLockData, const __u16 lock_type,
- const bool waitFlag)
+ const __u16 smb_file_id, const __u32 netpid, const int get_flag,
+ const __u64 len, struct file_lock *pLockData,
+ const __u16 lock_type, const bool waitFlag)
{
struct smb_com_transaction2_sfi_req *pSMB = NULL;
struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
@@ -2095,7 +2493,7 @@
} else
pSMB->Timeout = 0;
- parm_data->pid = cpu_to_le32(current->tgid);
+ parm_data->pid = cpu_to_le32(netpid);
parm_data->start = cpu_to_le64(pLockData->fl_start);
parm_data->length = cpu_to_le64(len); /* normalize negative numbers */
@@ -2812,8 +3210,7 @@
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le32(2);
/* BB find exact data count max from sess structure BB */
- pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+ pSMB->MaxDataCount = cpu_to_le32(CIFSMaxBufSize & 0xFFFFFF00);
pSMB->MaxSetupCount = 4;
pSMB->Reserved = 0;
pSMB->ParameterOffset = 0;
@@ -3306,8 +3703,7 @@
pSMB->Reserved = 0;
pSMB->TotalParameterCount = cpu_to_le32(parm_len);
pSMB->TotalDataCount = 0;
- pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+ pSMB->MaxDataCount = cpu_to_le32(CIFSMaxBufSize & 0xFFFFFF00);
pSMB->ParameterCount = pSMB->TotalParameterCount;
pSMB->DataCount = pSMB->TotalDataCount;
temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
@@ -3467,7 +3863,7 @@
int
CIFSSMBSetCIFSACL(const int xid, struct cifs_tcon *tcon, __u16 fid,
- struct cifs_ntsd *pntsd, __u32 acllen)
+ struct cifs_ntsd *pntsd, __u32 acllen, int aclflag)
{
__u16 byte_count, param_count, data_count, param_offset, data_offset;
int rc = 0;
@@ -3504,7 +3900,7 @@
pSMB->Fid = fid; /* file handle always le */
pSMB->Reserved2 = 0;
- pSMB->AclFlags = cpu_to_le32(CIFS_ACL_DACL);
+ pSMB->AclFlags = cpu_to_le32(aclflag);
if (pntsd && acllen) {
memcpy((char *) &pSMBr->hdr.Protocol + data_offset,
@@ -3977,8 +4373,7 @@
params = 12 + name_len /* includes null */ ;
pSMB->TotalDataCount = 0; /* no EAs */
pSMB->MaxParameterCount = cpu_to_le16(10);
- pSMB->MaxDataCount = cpu_to_le16((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+ pSMB->MaxDataCount = cpu_to_le16(CIFSMaxBufSize & 0xFFFFFF00);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4052,8 +4447,7 @@
psrch_inf->index_of_last_entry = 2 /* skip . and .. */ +
psrch_inf->entries_in_buffer;
lnoff = le16_to_cpu(parms->LastNameOffset);
- if (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE <
- lnoff) {
+ if (CIFSMaxBufSize < lnoff) {
cERROR(1, "ignoring corrupt resume name");
psrch_inf->last_entry = NULL;
return rc;
@@ -4097,9 +4491,7 @@
byte_count = 0;
pSMB->TotalDataCount = 0; /* no EAs */
pSMB->MaxParameterCount = cpu_to_le16(8);
- pSMB->MaxDataCount =
- cpu_to_le16((tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) &
- 0xFFFFFF00);
+ pSMB->MaxDataCount = cpu_to_le16(CIFSMaxBufSize & 0xFFFFFF00);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4181,8 +4573,7 @@
psrch_inf->index_of_last_entry +=
psrch_inf->entries_in_buffer;
lnoff = le16_to_cpu(parms->LastNameOffset);
- if (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE <
- lnoff) {
+ if (CIFSMaxBufSize < lnoff) {
cERROR(1, "ignoring corrupt resume name");
psrch_inf->last_entry = NULL;
return rc;
@@ -5840,7 +6231,7 @@
if (ea_name) {
if (ea_name_len == name_len &&
- strncmp(ea_name, temp_ptr, name_len) == 0) {
+ memcmp(ea_name, temp_ptr, name_len) == 0) {
temp_ptr += name_len + 1;
rc = value_len;
if (buf_size == 0)
@@ -6035,12 +6426,7 @@
pSMB->TotalParameterCount = 0 ;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le32(2);
- /* BB find exact data count max from sess structure BB */
- pSMB->MaxDataCount = 0; /* same in little endian or be */
-/* BB VERIFY verify which is correct for above BB */
- pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
-
+ pSMB->MaxDataCount = cpu_to_le32(CIFSMaxBufSize & 0xFFFFFF00);
pSMB->MaxSetupCount = 4;
pSMB->Reserved = 0;
pSMB->ParameterOffset = 0;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 62abf9f..d545a95 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -181,7 +181,7 @@
-EINVAL = invalid transact2
*/
-static int check2ndT2(struct smb_hdr *pSMB, unsigned int maxBufSize)
+static int check2ndT2(struct smb_hdr *pSMB)
{
struct smb_t2_rsp *pSMBt;
int remaining;
@@ -214,9 +214,9 @@
cFYI(1, "missing %d bytes from transact2, check next response",
remaining);
- if (total_data_size > maxBufSize) {
+ if (total_data_size > CIFSMaxBufSize) {
cERROR(1, "TotalDataSize %d is over maximum buffer %d",
- total_data_size, maxBufSize);
+ total_data_size, CIFSMaxBufSize);
return -EINVAL;
}
return remaining;
@@ -320,27 +320,24 @@
}
static bool
-allocate_buffers(char **bigbuf, char **smallbuf, unsigned int size,
- bool is_large_buf)
+allocate_buffers(struct TCP_Server_Info *server)
{
- char *bbuf = *bigbuf, *sbuf = *smallbuf;
-
- if (bbuf == NULL) {
- bbuf = (char *)cifs_buf_get();
- if (!bbuf) {
+ if (!server->bigbuf) {
+ server->bigbuf = (char *)cifs_buf_get();
+ if (!server->bigbuf) {
cERROR(1, "No memory for large SMB response");
msleep(3000);
/* retry will check if exiting */
return false;
}
- } else if (is_large_buf) {
+ } else if (server->large_buf) {
/* we are reusing a dirty large buf, clear its start */
- memset(bbuf, 0, size);
+ memset(server->bigbuf, 0, sizeof(struct smb_hdr));
}
- if (sbuf == NULL) {
- sbuf = (char *)cifs_small_buf_get();
- if (!sbuf) {
+ if (!server->smallbuf) {
+ server->smallbuf = (char *)cifs_small_buf_get();
+ if (!server->smallbuf) {
cERROR(1, "No memory for SMB response");
msleep(1000);
/* retry will check if exiting */
@@ -349,36 +346,116 @@
/* beginning of smb buffer is cleared in our buf_get */
} else {
/* if existing small buf clear beginning */
- memset(sbuf, 0, size);
+ memset(server->smallbuf, 0, sizeof(struct smb_hdr));
}
- *bigbuf = bbuf;
- *smallbuf = sbuf;
-
return true;
}
-static int
-read_from_socket(struct TCP_Server_Info *server, struct msghdr *smb_msg,
- struct kvec *iov, unsigned int to_read,
- unsigned int *ptotal_read, bool is_header_read)
+static bool
+server_unresponsive(struct TCP_Server_Info *server)
{
- int length, rc = 0;
- unsigned int total_read;
- char *buf = iov->iov_base;
+ if (echo_retries > 0 && server->tcpStatus == CifsGood &&
+ time_after(jiffies, server->lstrp +
+ (echo_retries * SMB_ECHO_INTERVAL))) {
+ cERROR(1, "Server %s has not responded in %d seconds. "
+ "Reconnecting...", server->hostname,
+ (echo_retries * SMB_ECHO_INTERVAL / HZ));
+ cifs_reconnect(server);
+ wake_up(&server->response_q);
+ return true;
+ }
- for (total_read = 0; total_read < to_read; total_read += length) {
- length = kernel_recvmsg(server->ssocket, smb_msg, iov, 1,
- to_read - total_read, 0);
+ return false;
+}
+
+/*
+ * kvec_array_init - clone a kvec array, and advance into it
+ * @new: pointer to memory for cloned array
+ * @iov: pointer to original array
+ * @nr_segs: number of members in original array
+ * @bytes: number of bytes to advance into the cloned array
+ *
+ * This function will copy the array provided in iov to a section of memory
+ * and advance the specified number of bytes into the new array. It returns
+ * the number of segments in the new array. "new" must be at least as big as
+ * the original iov array.
+ */
+static unsigned int
+kvec_array_init(struct kvec *new, struct kvec *iov, unsigned int nr_segs,
+ size_t bytes)
+{
+ size_t base = 0;
+
+ while (bytes || !iov->iov_len) {
+ int copy = min(bytes, iov->iov_len);
+
+ bytes -= copy;
+ base += copy;
+ if (iov->iov_len == base) {
+ iov++;
+ nr_segs--;
+ base = 0;
+ }
+ }
+ memcpy(new, iov, sizeof(*iov) * nr_segs);
+ new->iov_base += base;
+ new->iov_len -= base;
+ return nr_segs;
+}
+
+static struct kvec *
+get_server_iovec(struct TCP_Server_Info *server, unsigned int nr_segs)
+{
+ struct kvec *new_iov;
+
+ if (server->iov && nr_segs <= server->nr_iov)
+ return server->iov;
+
+ /* not big enough -- allocate a new one and release the old */
+ new_iov = kmalloc(sizeof(*new_iov) * nr_segs, GFP_NOFS);
+ if (new_iov) {
+ kfree(server->iov);
+ server->iov = new_iov;
+ server->nr_iov = nr_segs;
+ }
+ return new_iov;
+}
+
+int
+cifs_readv_from_socket(struct TCP_Server_Info *server, struct kvec *iov_orig,
+ unsigned int nr_segs, unsigned int to_read)
+{
+ int length = 0;
+ int total_read;
+ unsigned int segs;
+ struct msghdr smb_msg;
+ struct kvec *iov;
+
+ iov = get_server_iovec(server, nr_segs);
+ if (!iov)
+ return -ENOMEM;
+
+ smb_msg.msg_control = NULL;
+ smb_msg.msg_controllen = 0;
+
+ for (total_read = 0; to_read; total_read += length, to_read -= length) {
+ if (server_unresponsive(server)) {
+ total_read = -EAGAIN;
+ break;
+ }
+
+ segs = kvec_array_init(iov, iov_orig, nr_segs, total_read);
+
+ length = kernel_recvmsg(server->ssocket, &smb_msg,
+ iov, segs, to_read, 0);
+
if (server->tcpStatus == CifsExiting) {
- /* then will exit */
- rc = 2;
+ total_read = -ESHUTDOWN;
break;
} else if (server->tcpStatus == CifsNeedReconnect) {
cifs_reconnect(server);
- /* Reconnect wakes up rspns q */
- /* Now we will reread sock */
- rc = 1;
+ total_read = -EAGAIN;
break;
} else if (length == -ERESTARTSYS ||
length == -EAGAIN ||
@@ -390,56 +467,54 @@
*/
usleep_range(1000, 2000);
length = 0;
- if (!is_header_read)
- continue;
- /* Special handling for header read */
- if (total_read) {
- iov->iov_base = (to_read - total_read) +
- buf;
- iov->iov_len = to_read - total_read;
- smb_msg->msg_control = NULL;
- smb_msg->msg_controllen = 0;
- rc = 3;
- } else
- rc = 1;
- break;
+ continue;
} else if (length <= 0) {
- cERROR(1, "Received no data, expecting %d",
- to_read - total_read);
+ cFYI(1, "Received no data or error: expecting %d "
+ "got %d", to_read, length);
cifs_reconnect(server);
- rc = 1;
+ total_read = -EAGAIN;
break;
}
}
+ return total_read;
+}
- *ptotal_read = total_read;
- return rc;
+int
+cifs_read_from_socket(struct TCP_Server_Info *server, char *buf,
+ unsigned int to_read)
+{
+ struct kvec iov;
+
+ iov.iov_base = buf;
+ iov.iov_len = to_read;
+
+ return cifs_readv_from_socket(server, &iov, 1, to_read);
}
static bool
-check_rfc1002_header(struct TCP_Server_Info *server, char *buf)
+is_smb_response(struct TCP_Server_Info *server, unsigned char type)
{
- char temp = *buf;
- unsigned int pdu_length = be32_to_cpu(
- ((struct smb_hdr *)buf)->smb_buf_length);
-
/*
* The first byte big endian of the length field,
* is actually not part of the length but the type
* with the most common, zero, as regular data.
*/
- if (temp == (char) RFC1002_SESSION_KEEP_ALIVE) {
- return false;
- } else if (temp == (char)RFC1002_POSITIVE_SESSION_RESPONSE) {
- cFYI(1, "Good RFC 1002 session rsp");
- return false;
- } else if (temp == (char)RFC1002_NEGATIVE_SESSION_RESPONSE) {
+ switch (type) {
+ case RFC1002_SESSION_MESSAGE:
+ /* Regular SMB response */
+ return true;
+ case RFC1002_SESSION_KEEP_ALIVE:
+ cFYI(1, "RFC 1002 session keep alive");
+ break;
+ case RFC1002_POSITIVE_SESSION_RESPONSE:
+ cFYI(1, "RFC 1002 positive session response");
+ break;
+ case RFC1002_NEGATIVE_SESSION_RESPONSE:
/*
* We get this from Windows 98 instead of an error on
* SMB negprot response.
*/
- cFYI(1, "Negative RFC1002 Session Response Error 0x%x)",
- pdu_length);
+ cFYI(1, "RFC 1002 negative session response");
/* give server a second to clean up */
msleep(1000);
/*
@@ -448,87 +523,89 @@
* is since we do not begin with RFC1001 session
* initialize frame).
*/
- cifs_set_port((struct sockaddr *)
- &server->dstaddr, CIFS_PORT);
+ cifs_set_port((struct sockaddr *)&server->dstaddr, CIFS_PORT);
cifs_reconnect(server);
wake_up(&server->response_q);
- return false;
- } else if (temp != (char) 0) {
- cERROR(1, "Unknown RFC 1002 frame");
- cifs_dump_mem(" Received Data: ", buf, 4);
+ break;
+ default:
+ cERROR(1, "RFC 1002 unknown response type 0x%x", type);
cifs_reconnect(server);
- return false;
}
- /* else we have an SMB response */
- if ((pdu_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) ||
- (pdu_length < sizeof(struct smb_hdr) - 1 - 4)) {
- cERROR(1, "Invalid size SMB length %d pdu_length %d",
- 4, pdu_length+4);
- cifs_reconnect(server);
- wake_up(&server->response_q);
- return false;
- }
-
- return true;
+ return false;
}
static struct mid_q_entry *
-find_cifs_mid(struct TCP_Server_Info *server, struct smb_hdr *buf,
- int *length, bool is_large_buf, bool *is_multi_rsp, char **bigbuf)
+find_mid(struct TCP_Server_Info *server, struct smb_hdr *buf)
{
- struct mid_q_entry *mid = NULL, *tmp_mid, *ret = NULL;
+ struct mid_q_entry *mid;
spin_lock(&GlobalMid_Lock);
- list_for_each_entry_safe(mid, tmp_mid, &server->pending_mid_q, qhead) {
- if (mid->mid != buf->Mid ||
- mid->midState != MID_REQUEST_SUBMITTED ||
- mid->command != buf->Command)
- continue;
-
- if (*length == 0 && check2ndT2(buf, server->maxBuf) > 0) {
- /* We have a multipart transact2 resp */
- *is_multi_rsp = true;
- if (mid->resp_buf) {
- /* merge response - fix up 1st*/
- *length = coalesce_t2(buf, mid->resp_buf);
- if (*length > 0) {
- *length = 0;
- mid->multiRsp = true;
- break;
- }
- /* All parts received or packet is malformed. */
- mid->multiEnd = true;
- goto multi_t2_fnd;
- }
- if (!is_large_buf) {
- /*FIXME: switch to already allocated largebuf?*/
- cERROR(1, "1st trans2 resp needs bigbuf");
- } else {
- /* Have first buffer */
- mid->resp_buf = buf;
- mid->largeBuf = true;
- *bigbuf = NULL;
- }
- break;
+ list_for_each_entry(mid, &server->pending_mid_q, qhead) {
+ if (mid->mid == buf->Mid &&
+ mid->midState == MID_REQUEST_SUBMITTED &&
+ mid->command == buf->Command) {
+ spin_unlock(&GlobalMid_Lock);
+ return mid;
}
- mid->resp_buf = buf;
- mid->largeBuf = is_large_buf;
-multi_t2_fnd:
- if (*length == 0)
- mid->midState = MID_RESPONSE_RECEIVED;
- else
- mid->midState = MID_RESPONSE_MALFORMED;
-#ifdef CONFIG_CIFS_STATS2
- mid->when_received = jiffies;
-#endif
- list_del_init(&mid->qhead);
- ret = mid;
- break;
}
spin_unlock(&GlobalMid_Lock);
+ return NULL;
+}
- return ret;
+void
+dequeue_mid(struct mid_q_entry *mid, bool malformed)
+{
+#ifdef CONFIG_CIFS_STATS2
+ mid->when_received = jiffies;
+#endif
+ spin_lock(&GlobalMid_Lock);
+ if (!malformed)
+ mid->midState = MID_RESPONSE_RECEIVED;
+ else
+ mid->midState = MID_RESPONSE_MALFORMED;
+ list_del_init(&mid->qhead);
+ spin_unlock(&GlobalMid_Lock);
+}
+
+static void
+handle_mid(struct mid_q_entry *mid, struct TCP_Server_Info *server,
+ struct smb_hdr *buf, int malformed)
+{
+ if (malformed == 0 && check2ndT2(buf) > 0) {
+ mid->multiRsp = true;
+ if (mid->resp_buf) {
+ /* merge response - fix up 1st*/
+ malformed = coalesce_t2(buf, mid->resp_buf);
+ if (malformed > 0)
+ return;
+
+ /* All parts received or packet is malformed. */
+ mid->multiEnd = true;
+ return dequeue_mid(mid, malformed);
+ }
+ if (!server->large_buf) {
+ /*FIXME: switch to already allocated largebuf?*/
+ cERROR(1, "1st trans2 resp needs bigbuf");
+ } else {
+ /* Have first buffer */
+ mid->resp_buf = buf;
+ mid->largeBuf = true;
+ server->bigbuf = NULL;
+ }
+ return;
+ }
+ mid->resp_buf = buf;
+ mid->largeBuf = server->large_buf;
+ /* Was previous buf put in mpx struct for multi-rsp? */
+ if (!mid->multiRsp) {
+ /* smb buffer will be freed by user thread */
+ if (server->large_buf)
+ server->bigbuf = NULL;
+ else
+ server->smallbuf = NULL;
+ }
+ dequeue_mid(mid, malformed);
}
static void clean_demultiplex_info(struct TCP_Server_Info *server)
@@ -618,6 +695,7 @@
}
kfree(server->hostname);
+ kfree(server->iov);
kfree(server);
length = atomic_dec_return(&tcpSesAllocCount);
@@ -627,20 +705,70 @@
}
static int
+standard_receive3(struct TCP_Server_Info *server, struct mid_q_entry *mid)
+{
+ int length;
+ char *buf = server->smallbuf;
+ struct smb_hdr *smb_buffer = (struct smb_hdr *)buf;
+ unsigned int pdu_length = be32_to_cpu(smb_buffer->smb_buf_length);
+
+ /* make sure this will fit in a large buffer */
+ if (pdu_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
+ cERROR(1, "SMB response too long (%u bytes)",
+ pdu_length);
+ cifs_reconnect(server);
+ wake_up(&server->response_q);
+ return -EAGAIN;
+ }
+
+ /* switch to large buffer if too big for a small one */
+ if (pdu_length > MAX_CIFS_SMALL_BUFFER_SIZE - 4) {
+ server->large_buf = true;
+ memcpy(server->bigbuf, server->smallbuf, server->total_read);
+ buf = server->bigbuf;
+ smb_buffer = (struct smb_hdr *)buf;
+ }
+
+ /* now read the rest */
+ length = cifs_read_from_socket(server,
+ buf + sizeof(struct smb_hdr) - 1,
+ pdu_length - sizeof(struct smb_hdr) + 1 + 4);
+ if (length < 0)
+ return length;
+ server->total_read += length;
+
+ dump_smb(smb_buffer, server->total_read);
+
+ /*
+ * We know that we received enough to get to the MID as we
+ * checked the pdu_length earlier. Now check to see
+ * if the rest of the header is OK. We borrow the length
+ * var for the rest of the loop to avoid a new stack var.
+ *
+ * 48 bytes is enough to display the header and a little bit
+ * into the payload for debugging purposes.
+ */
+ length = checkSMB(smb_buffer, smb_buffer->Mid, server->total_read);
+ if (length != 0)
+ cifs_dump_mem("Bad SMB: ", buf,
+ min_t(unsigned int, server->total_read, 48));
+
+ if (mid)
+ handle_mid(mid, server, smb_buffer, length);
+
+ return length;
+}
+
+static int
cifs_demultiplex_thread(void *p)
{
int length;
struct TCP_Server_Info *server = p;
- unsigned int pdu_length, total_read;
- char *buf = NULL, *bigbuf = NULL, *smallbuf = NULL;
+ unsigned int pdu_length;
+ char *buf = NULL;
struct smb_hdr *smb_buffer = NULL;
- struct msghdr smb_msg;
- struct kvec iov;
struct task_struct *task_to_wake = NULL;
struct mid_q_entry *mid_entry;
- bool isLargeBuf = false;
- bool isMultiRsp = false;
- int rc;
current->flags |= PF_MEMALLOC;
cFYI(1, "Demultiplex PID: %d", task_pid_nr(current));
@@ -655,111 +783,65 @@
if (try_to_freeze())
continue;
- if (!allocate_buffers(&bigbuf, &smallbuf,
- sizeof(struct smb_hdr), isLargeBuf))
+ if (!allocate_buffers(server))
continue;
- isLargeBuf = false;
- isMultiRsp = false;
- smb_buffer = (struct smb_hdr *)smallbuf;
- buf = smallbuf;
- iov.iov_base = buf;
- iov.iov_len = 4;
- smb_msg.msg_control = NULL;
- smb_msg.msg_controllen = 0;
+ server->large_buf = false;
+ smb_buffer = (struct smb_hdr *)server->smallbuf;
+ buf = server->smallbuf;
pdu_length = 4; /* enough to get RFC1001 header */
-incomplete_rcv:
- if (echo_retries > 0 && server->tcpStatus == CifsGood &&
- time_after(jiffies, server->lstrp +
- (echo_retries * SMB_ECHO_INTERVAL))) {
- cERROR(1, "Server %s has not responded in %d seconds. "
- "Reconnecting...", server->hostname,
- (echo_retries * SMB_ECHO_INTERVAL / HZ));
- cifs_reconnect(server);
- wake_up(&server->response_q);
+ length = cifs_read_from_socket(server, buf, pdu_length);
+ if (length < 0)
continue;
- }
-
- rc = read_from_socket(server, &smb_msg, &iov, pdu_length,
- &total_read, true /* header read */);
- if (rc == 3)
- goto incomplete_rcv;
- else if (rc == 2)
- break;
- else if (rc == 1)
- continue;
+ server->total_read = length;
/*
* The right amount was read from socket - 4 bytes,
* so we can now interpret the length field.
*/
-
- /*
- * Note that RFC 1001 length is big endian on the wire,
- * but we convert it here so it is always manipulated
- * as host byte order.
- */
pdu_length = be32_to_cpu(smb_buffer->smb_buf_length);
- cFYI(1, "rfc1002 length 0x%x", pdu_length+4);
- if (!check_rfc1002_header(server, buf))
+ cFYI(1, "RFC1002 header 0x%x", pdu_length);
+ if (!is_smb_response(server, buf[0]))
continue;
- /* else length ok */
- if (pdu_length > MAX_CIFS_SMALL_BUFFER_SIZE - 4) {
- isLargeBuf = true;
- memcpy(bigbuf, smallbuf, 4);
- smb_buffer = (struct smb_hdr *)bigbuf;
- buf = bigbuf;
+ /* make sure we have enough to get to the MID */
+ if (pdu_length < sizeof(struct smb_hdr) - 1 - 4) {
+ cERROR(1, "SMB response too short (%u bytes)",
+ pdu_length);
+ cifs_reconnect(server);
+ wake_up(&server->response_q);
+ continue;
}
- iov.iov_base = 4 + buf;
- iov.iov_len = pdu_length;
- rc = read_from_socket(server, &smb_msg, &iov, pdu_length,
- &total_read, false);
- if (rc == 2)
- break;
- else if (rc == 1)
+ /* read down to the MID */
+ length = cifs_read_from_socket(server, buf + 4,
+ sizeof(struct smb_hdr) - 1 - 4);
+ if (length < 0)
+ continue;
+ server->total_read += length;
+
+ mid_entry = find_mid(server, smb_buffer);
+
+ if (!mid_entry || !mid_entry->receive)
+ length = standard_receive3(server, mid_entry);
+ else
+ length = mid_entry->receive(server, mid_entry);
+
+ if (length < 0)
continue;
- total_read += 4; /* account for rfc1002 hdr */
-
- dump_smb(smb_buffer, total_read);
-
- /*
- * We know that we received enough to get to the MID as we
- * checked the pdu_length earlier. Now check to see
- * if the rest of the header is OK. We borrow the length
- * var for the rest of the loop to avoid a new stack var.
- *
- * 48 bytes is enough to display the header and a little bit
- * into the payload for debugging purposes.
- */
- length = checkSMB(smb_buffer, smb_buffer->Mid, total_read);
- if (length != 0)
- cifs_dump_mem("Bad SMB: ", buf,
- min_t(unsigned int, total_read, 48));
+ if (server->large_buf) {
+ buf = server->bigbuf;
+ smb_buffer = (struct smb_hdr *)buf;
+ }
server->lstrp = jiffies;
-
- mid_entry = find_cifs_mid(server, smb_buffer, &length,
- isLargeBuf, &isMultiRsp, &bigbuf);
if (mid_entry != NULL) {
- mid_entry->callback(mid_entry);
- /* Was previous buf put in mpx struct for multi-rsp? */
- if (!isMultiRsp) {
- /* smb buffer will be freed by user thread */
- if (isLargeBuf)
- bigbuf = NULL;
- else
- smallbuf = NULL;
- }
- } else if (length != 0) {
- /* response sanity checks failed */
- continue;
- } else if (!is_valid_oplock_break(smb_buffer, server) &&
- !isMultiRsp) {
+ if (!mid_entry->multiRsp || mid_entry->multiEnd)
+ mid_entry->callback(mid_entry);
+ } else if (!is_valid_oplock_break(smb_buffer, server)) {
cERROR(1, "No task to wake, unknown frame received! "
"NumMids %d", atomic_read(&midCount));
cifs_dump_mem("Received Data is: ", buf,
@@ -773,9 +855,9 @@
} /* end while !EXITING */
/* buffer usually freed in free_mid - need to free it here on exit */
- cifs_buf_release(bigbuf);
- if (smallbuf) /* no sense logging a debug message if NULL */
- cifs_small_buf_release(smallbuf);
+ cifs_buf_release(server->bigbuf);
+ if (server->smallbuf) /* no sense logging a debug message if NULL */
+ cifs_small_buf_release(server->smallbuf);
task_to_wake = xchg(&server->tsk, NULL);
clean_demultiplex_info(server);
@@ -827,6 +909,7 @@
{
char *value, *data, *end;
char *mountdata_copy = NULL, *options;
+ int err;
unsigned int temp_len, i, j;
char separator[2];
short int override_uid = -1;
@@ -883,6 +966,8 @@
cFYI(1, "Null separator not allowed");
}
}
+ vol->backupuid_specified = false; /* no backup intent for a user */
+ vol->backupgid_specified = false; /* no backup intent for a group */
while ((data = strsep(&options, separator)) != NULL) {
if (!*data)
@@ -1442,6 +1527,22 @@
vol->mfsymlinks = true;
} else if (strnicmp(data, "multiuser", 8) == 0) {
vol->multiuser = true;
+ } else if (!strnicmp(data, "backupuid", 9) && value && *value) {
+ err = kstrtouint(value, 0, &vol->backupuid);
+ if (err < 0) {
+ cERROR(1, "%s: Invalid backupuid value",
+ __func__);
+ goto cifs_parse_mount_err;
+ }
+ vol->backupuid_specified = true;
+ } else if (!strnicmp(data, "backupgid", 9) && value && *value) {
+ err = kstrtouint(value, 0, &vol->backupgid);
+ if (err < 0) {
+ cERROR(1, "%s: Invalid backupgid value",
+ __func__);
+ goto cifs_parse_mount_err;
+ }
+ vol->backupgid_specified = true;
} else
printk(KERN_WARNING "CIFS: Unknown mount option %s\n",
data);
@@ -2209,16 +2310,16 @@
(new->mnt_cifs_flags & CIFS_MOUNT_MASK))
return 0;
- if (old->rsize != new->rsize)
- return 0;
-
/*
- * We want to share sb only if we don't specify wsize or specified wsize
- * is greater or equal than existing one.
+ * We want to share sb only if we don't specify an r/wsize or
+ * specified r/wsize is greater than or equal to existing one.
*/
if (new->wsize && new->wsize < old->wsize)
return 0;
+ if (new->rsize && new->rsize < old->rsize)
+ return 0;
+
if (old->mnt_uid != new->mnt_uid || old->mnt_gid != new->mnt_gid)
return 0;
@@ -2656,14 +2757,6 @@
CIFS_MOUNT_POSIX_PATHS;
}
- if (cifs_sb && (cifs_sb->rsize > 127 * 1024)) {
- if ((cap & CIFS_UNIX_LARGE_READ_CAP) == 0) {
- cifs_sb->rsize = 127 * 1024;
- cFYI(DBG2, "larger reads not supported by srv");
- }
- }
-
-
cFYI(1, "Negotiate caps 0x%x", (int)cap);
#ifdef CONFIG_CIFS_DEBUG2
if (cap & CIFS_UNIX_FCNTL_CAP)
@@ -2708,31 +2801,19 @@
spin_lock_init(&cifs_sb->tlink_tree_lock);
cifs_sb->tlink_tree = RB_ROOT;
- if (pvolume_info->rsize > CIFSMaxBufSize) {
- cERROR(1, "rsize %d too large, using MaxBufSize",
- pvolume_info->rsize);
- cifs_sb->rsize = CIFSMaxBufSize;
- } else if ((pvolume_info->rsize) &&
- (pvolume_info->rsize <= CIFSMaxBufSize))
- cifs_sb->rsize = pvolume_info->rsize;
- else /* default */
- cifs_sb->rsize = CIFSMaxBufSize;
-
- if (cifs_sb->rsize < 2048) {
- cifs_sb->rsize = 2048;
- /* Windows ME may prefer this */
- cFYI(1, "readsize set to minimum: 2048");
- }
-
/*
- * Temporarily set wsize for matching superblock. If we end up using
- * new sb then cifs_negotiate_wsize will later negotiate it downward
- * if needed.
+ * Temporarily set r/wsize for matching superblock. If we end up using
+ * new sb then client will later negotiate it downward if needed.
*/
+ cifs_sb->rsize = pvolume_info->rsize;
cifs_sb->wsize = pvolume_info->wsize;
cifs_sb->mnt_uid = pvolume_info->linux_uid;
cifs_sb->mnt_gid = pvolume_info->linux_gid;
+ if (pvolume_info->backupuid_specified)
+ cifs_sb->mnt_backupuid = pvolume_info->backupuid;
+ if (pvolume_info->backupgid_specified)
+ cifs_sb->mnt_backupgid = pvolume_info->backupgid;
cifs_sb->mnt_file_mode = pvolume_info->file_mode;
cifs_sb->mnt_dir_mode = pvolume_info->dir_mode;
cFYI(1, "file mode: 0x%x dir mode: 0x%x",
@@ -2763,6 +2844,10 @@
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_RWPIDFORWARD;
if (pvolume_info->cifs_acl)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL;
+ if (pvolume_info->backupuid_specified)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_BACKUPUID;
+ if (pvolume_info->backupgid_specified)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_BACKUPGID;
if (pvolume_info->override_uid)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
if (pvolume_info->override_gid)
@@ -2795,29 +2880,41 @@
}
/*
- * When the server supports very large writes via POSIX extensions, we can
- * allow up to 2^24-1, minus the size of a WRITE_AND_X header, not including
- * the RFC1001 length.
+ * When the server supports very large reads and writes via POSIX extensions,
+ * we can allow up to 2^24-1, minus the size of a READ/WRITE_AND_X header, not
+ * including the RFC1001 length.
*
* Note that this might make for "interesting" allocation problems during
* writeback however as we have to allocate an array of pointers for the
* pages. A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096.
+ *
+ * For reads, there is a similar problem as we need to allocate an array
+ * of kvecs to handle the receive, though that should only need to be done
+ * once.
*/
#define CIFS_MAX_WSIZE ((1<<24) - 1 - sizeof(WRITE_REQ) + 4)
+#define CIFS_MAX_RSIZE ((1<<24) - sizeof(READ_RSP) + 4)
/*
- * When the server doesn't allow large posix writes, only allow a wsize of
- * 128k minus the size of the WRITE_AND_X header. That allows for a write up
- * to the maximum size described by RFC1002.
+ * When the server doesn't allow large posix writes, only allow a rsize/wsize
+ * of 2^17-1 minus the size of the call header. That allows for a read or
+ * write up to the maximum size described by RFC1002.
*/
-#define CIFS_MAX_RFC1002_WSIZE (128 * 1024 - sizeof(WRITE_REQ) + 4)
+#define CIFS_MAX_RFC1002_WSIZE ((1<<17) - 1 - sizeof(WRITE_REQ) + 4)
+#define CIFS_MAX_RFC1002_RSIZE ((1<<17) - 1 - sizeof(READ_RSP) + 4)
/*
* The default wsize is 1M. find_get_pages seems to return a maximum of 256
* pages in a single call. With PAGE_CACHE_SIZE == 4k, this means we can fill
* a single wsize request with a single call.
*/
-#define CIFS_DEFAULT_WSIZE (1024 * 1024)
+#define CIFS_DEFAULT_IOSIZE (1024 * 1024)
+
+/*
+ * Windows only supports a max of 60k reads. Default to that when posix
+ * extensions aren't in force.
+ */
+#define CIFS_DEFAULT_NON_POSIX_RSIZE (60 * 1024)
static unsigned int
cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
@@ -2825,7 +2922,7 @@
__u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability);
struct TCP_Server_Info *server = tcon->ses->server;
unsigned int wsize = pvolume_info->wsize ? pvolume_info->wsize :
- CIFS_DEFAULT_WSIZE;
+ CIFS_DEFAULT_IOSIZE;
/* can server support 24-bit write sizes? (via UNIX extensions) */
if (!tcon->unix_ext || !(unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
@@ -2848,6 +2945,50 @@
return wsize;
}
+static unsigned int
+cifs_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
+{
+ __u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability);
+ struct TCP_Server_Info *server = tcon->ses->server;
+ unsigned int rsize, defsize;
+
+ /*
+ * Set default value...
+ *
+ * HACK alert! Ancient servers have very small buffers. Even though
+ * MS-CIFS indicates that servers are only limited by the client's
+ * bufsize for reads, testing against win98se shows that it throws
+ * INVALID_PARAMETER errors if you try to request too large a read.
+ *
+ * If the server advertises a MaxBufferSize of less than one page,
+ * assume that it also can't satisfy reads larger than that either.
+ *
+ * FIXME: Is there a better heuristic for this?
+ */
+ if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
+ defsize = CIFS_DEFAULT_IOSIZE;
+ else if (server->capabilities & CAP_LARGE_READ_X)
+ defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
+ else if (server->maxBuf >= PAGE_CACHE_SIZE)
+ defsize = CIFSMaxBufSize;
+ else
+ defsize = server->maxBuf - sizeof(READ_RSP);
+
+ rsize = pvolume_info->rsize ? pvolume_info->rsize : defsize;
+
+ /*
+ * no CAP_LARGE_READ_X? Then MS-CIFS states that we must limit this to
+ * the client's MaxBufferSize.
+ */
+ if (!(server->capabilities & CAP_LARGE_READ_X))
+ rsize = min_t(unsigned int, CIFSMaxBufSize, rsize);
+
+ /* hard limit of CIFS_MAX_RSIZE */
+ rsize = min_t(unsigned int, rsize, CIFS_MAX_RSIZE);
+
+ return rsize;
+}
+
static int
is_path_accessible(int xid, struct cifs_tcon *tcon,
struct cifs_sb_info *cifs_sb, const char *full_path)
@@ -3041,6 +3182,22 @@
return volume_info;
}
+/* make sure ra_pages is a multiple of rsize */
+static inline unsigned int
+cifs_ra_pages(struct cifs_sb_info *cifs_sb)
+{
+ unsigned int reads;
+ unsigned int rsize_pages = cifs_sb->rsize / PAGE_CACHE_SIZE;
+
+ if (rsize_pages >= default_backing_dev_info.ra_pages)
+ return default_backing_dev_info.ra_pages;
+ else if (rsize_pages == 0)
+ return rsize_pages;
+
+ reads = default_backing_dev_info.ra_pages / rsize_pages;
+ return reads * rsize_pages;
+}
+
int
cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info)
{
@@ -3059,8 +3216,6 @@
if (rc)
return rc;
- cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages;
-
#ifdef CONFIG_CIFS_DFS_UPCALL
try_mount_again:
/* cleanup activities if we're chasing a referral */
@@ -3125,15 +3280,11 @@
CIFSSMBQFSAttributeInfo(xid, tcon);
}
- if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) {
- cifs_sb->rsize = 1024 * 127;
- cFYI(DBG2, "no very large read support, rsize now 127K");
- }
- if (!(tcon->ses->capabilities & CAP_LARGE_READ_X))
- cifs_sb->rsize = min(cifs_sb->rsize,
- (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
-
cifs_sb->wsize = cifs_negotiate_wsize(tcon, volume_info);
+ cifs_sb->rsize = cifs_negotiate_rsize(tcon, volume_info);
+
+ /* tune readahead according to rsize */
+ cifs_sb->bdi.ra_pages = cifs_ra_pages(cifs_sb);
remote_path_check:
#ifdef CONFIG_CIFS_DFS_UPCALL
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 72d448b..d7eeb9d 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -171,7 +171,7 @@
}
tcon = tlink_tcon(tlink);
- if (oplockEnabled)
+ if (enable_oplocks)
oplock = REQ_OPLOCK;
if (nd)
@@ -244,6 +244,9 @@
if (!tcon->unix_ext && (mode & S_IWUGO) == 0)
create_options |= CREATE_OPTION_READONLY;
+ if (backup_cred(cifs_sb))
+ create_options |= CREATE_OPEN_BACKUP_INTENT;
+
if (tcon->ses->capabilities & CAP_NT_SMBS)
rc = CIFSSMBOpen(xid, tcon, full_path, disposition,
desiredAccess, create_options,
@@ -357,6 +360,7 @@
{
int rc = -EPERM;
int xid;
+ int create_options = CREATE_NOT_DIR | CREATE_OPTION_SPECIAL;
struct cifs_sb_info *cifs_sb;
struct tcon_link *tlink;
struct cifs_tcon *pTcon;
@@ -431,9 +435,11 @@
return rc;
}
- /* FIXME: would WRITE_OWNER | WRITE_DAC be better? */
+ if (backup_cred(cifs_sb))
+ create_options |= CREATE_OPEN_BACKUP_INTENT;
+
rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_CREATE,
- GENERIC_WRITE, CREATE_NOT_DIR | CREATE_OPTION_SPECIAL,
+ GENERIC_WRITE, create_options,
&fileHandle, &oplock, buf, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc)
@@ -642,8 +648,16 @@
if (direntry->d_inode) {
if (cifs_revalidate_dentry(direntry))
return 0;
- else
+ else {
+ /*
+ * Forcibly invalidate automounting directory inodes
+ * (remote DFS directories) so to have them
+ * instantiated again for automount
+ */
+ if (IS_AUTOMOUNT(direntry->d_inode))
+ return 0;
return 1;
+ }
}
/*
diff --git a/fs/cifs/export.c b/fs/cifs/export.c
index 55d87ac..9c7ecdc 100644
--- a/fs/cifs/export.c
+++ b/fs/cifs/export.c
@@ -45,7 +45,7 @@
#include "cifs_debug.h"
#include "cifsfs.h"
-#ifdef CIFS_NFSD_EXPORT
+#ifdef CONFIG_CIFS_NFSD_EXPORT
static struct dentry *cifs_get_parent(struct dentry *dentry)
{
/* BB need to add code here eventually to enable export via NFSD */
@@ -63,5 +63,5 @@
.encode_fs = */
};
-#endif /* CIFS_NFSD_EXPORT */
+#endif /* CONFIG_CIFS_NFSD_EXPORT */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 9f41a10..ea096ce 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/mount.h>
#include <linux/slab.h>
+#include <linux/swap.h>
#include <asm/div64.h>
#include "cifsfs.h"
#include "cifspdu.h"
@@ -174,6 +175,7 @@
int rc;
int desiredAccess;
int disposition;
+ int create_options = CREATE_NOT_DIR;
FILE_ALL_INFO *buf;
desiredAccess = cifs_convert_flags(f_flags);
@@ -210,9 +212,12 @@
if (!buf)
return -ENOMEM;
+ if (backup_cred(cifs_sb))
+ create_options |= CREATE_OPEN_BACKUP_INTENT;
+
if (tcon->ses->capabilities & CAP_NT_SMBS)
rc = CIFSSMBOpen(xid, tcon, full_path, disposition,
- desiredAccess, CREATE_NOT_DIR, pnetfid, poplock, buf,
+ desiredAccess, create_options, pnetfid, poplock, buf,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags
& CIFS_MOUNT_MAP_SPECIAL_CHR);
else
@@ -258,8 +263,6 @@
pCifsFile->invalidHandle = false;
pCifsFile->tlink = cifs_get_tlink(tlink);
mutex_init(&pCifsFile->fh_mutex);
- mutex_init(&pCifsFile->lock_mutex);
- INIT_LIST_HEAD(&pCifsFile->llist);
INIT_WORK(&pCifsFile->oplock_break, cifs_oplock_break);
spin_lock(&cifs_file_list_lock);
@@ -272,11 +275,14 @@
spin_unlock(&cifs_file_list_lock);
cifs_set_oplock_level(pCifsInode, oplock);
+ pCifsInode->can_cache_brlcks = pCifsInode->clientCanCacheAll;
file->private_data = pCifsFile;
return pCifsFile;
}
+static void cifs_del_lock_waiters(struct cifsLockInfo *lock);
+
/*
* Release a reference on the file private data. This may involve closing
* the filehandle out on the server. Must be called without holding
@@ -327,12 +333,15 @@
/* Delete any outstanding lock records. We'll lose them when the file
* is closed anyway.
*/
- mutex_lock(&cifs_file->lock_mutex);
- list_for_each_entry_safe(li, tmp, &cifs_file->llist, llist) {
+ mutex_lock(&cifsi->lock_mutex);
+ list_for_each_entry_safe(li, tmp, &cifsi->llist, llist) {
+ if (li->netfid != cifs_file->netfid)
+ continue;
list_del(&li->llist);
+ cifs_del_lock_waiters(li);
kfree(li);
}
- mutex_unlock(&cifs_file->lock_mutex);
+ mutex_unlock(&cifsi->lock_mutex);
cifs_put_tlink(cifs_file->tlink);
dput(cifs_file->dentry);
@@ -371,7 +380,7 @@
cFYI(1, "inode = 0x%p file flags are 0x%x for %s",
inode, file->f_flags, full_path);
- if (oplockEnabled)
+ if (enable_oplocks)
oplock = REQ_OPLOCK;
else
oplock = 0;
@@ -465,6 +474,7 @@
char *full_path = NULL;
int desiredAccess;
int disposition = FILE_OPEN;
+ int create_options = CREATE_NOT_DIR;
__u16 netfid;
xid = GetXid();
@@ -495,7 +505,7 @@
cFYI(1, "inode = 0x%p file flags 0x%x for %s",
inode, pCifsFile->f_flags, full_path);
- if (oplockEnabled)
+ if (enable_oplocks)
oplock = REQ_OPLOCK;
else
oplock = 0;
@@ -524,6 +534,9 @@
desiredAccess = cifs_convert_flags(pCifsFile->f_flags);
+ if (backup_cred(cifs_sb))
+ create_options |= CREATE_OPEN_BACKUP_INTENT;
+
/* Can not refresh inode by passing in file_info buf to be returned
by SMBOpen and then calling get_inode_info with returned buf
since file might have write behind data that needs to be flushed
@@ -531,7 +544,7 @@
that inode was not dirty locally we could do this */
rc = CIFSSMBOpen(xid, tcon, full_path, disposition, desiredAccess,
- CREATE_NOT_DIR, &netfid, &oplock, NULL,
+ create_options, &netfid, &oplock, NULL,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc) {
@@ -631,219 +644,687 @@
return rc;
}
-static int store_file_lock(struct cifsFileInfo *fid, __u64 len,
- __u64 offset, __u8 lockType)
+static struct cifsLockInfo *
+cifs_lock_init(__u64 len, __u64 offset, __u8 type, __u16 netfid)
{
struct cifsLockInfo *li =
kmalloc(sizeof(struct cifsLockInfo), GFP_KERNEL);
- if (li == NULL)
- return -ENOMEM;
+ if (!li)
+ return li;
+ li->netfid = netfid;
li->offset = offset;
li->length = len;
- li->type = lockType;
- mutex_lock(&fid->lock_mutex);
- list_add(&li->llist, &fid->llist);
- mutex_unlock(&fid->lock_mutex);
+ li->type = type;
+ li->pid = current->tgid;
+ INIT_LIST_HEAD(&li->blist);
+ init_waitqueue_head(&li->block_q);
+ return li;
+}
+
+static void
+cifs_del_lock_waiters(struct cifsLockInfo *lock)
+{
+ struct cifsLockInfo *li, *tmp;
+ list_for_each_entry_safe(li, tmp, &lock->blist, blist) {
+ list_del_init(&li->blist);
+ wake_up(&li->block_q);
+ }
+}
+
+static bool
+cifs_find_lock_conflict(struct cifsInodeInfo *cinode, __u64 offset,
+ __u64 length, __u8 type, __u16 netfid,
+ struct cifsLockInfo **conf_lock)
+{
+ struct cifsLockInfo *li, *tmp;
+
+ list_for_each_entry_safe(li, tmp, &cinode->llist, llist) {
+ if (offset + length <= li->offset ||
+ offset >= li->offset + li->length)
+ continue;
+ else if ((type & LOCKING_ANDX_SHARED_LOCK) &&
+ ((netfid == li->netfid && current->tgid == li->pid) ||
+ type == li->type))
+ continue;
+ else {
+ *conf_lock = li;
+ return true;
+ }
+ }
+ return false;
+}
+
+static int
+cifs_lock_test(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
+ __u8 type, __u16 netfid, struct file_lock *flock)
+{
+ int rc = 0;
+ struct cifsLockInfo *conf_lock;
+ bool exist;
+
+ mutex_lock(&cinode->lock_mutex);
+
+ exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
+ &conf_lock);
+ if (exist) {
+ flock->fl_start = conf_lock->offset;
+ flock->fl_end = conf_lock->offset + conf_lock->length - 1;
+ flock->fl_pid = conf_lock->pid;
+ if (conf_lock->type & LOCKING_ANDX_SHARED_LOCK)
+ flock->fl_type = F_RDLCK;
+ else
+ flock->fl_type = F_WRLCK;
+ } else if (!cinode->can_cache_brlcks)
+ rc = 1;
+ else
+ flock->fl_type = F_UNLCK;
+
+ mutex_unlock(&cinode->lock_mutex);
+ return rc;
+}
+
+static int
+cifs_lock_add(struct cifsInodeInfo *cinode, __u64 len, __u64 offset,
+ __u8 type, __u16 netfid)
+{
+ struct cifsLockInfo *li;
+
+ li = cifs_lock_init(len, offset, type, netfid);
+ if (!li)
+ return -ENOMEM;
+
+ mutex_lock(&cinode->lock_mutex);
+ list_add_tail(&li->llist, &cinode->llist);
+ mutex_unlock(&cinode->lock_mutex);
return 0;
}
-int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
+static int
+cifs_lock_add_if(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
+ __u8 type, __u16 netfid, bool wait)
{
- int rc, xid;
- __u32 numLock = 0;
- __u32 numUnlock = 0;
- __u64 length;
- bool wait_flag = false;
- struct cifs_sb_info *cifs_sb;
- struct cifs_tcon *tcon;
- __u16 netfid;
- __u8 lockType = LOCKING_ANDX_LARGE_FILES;
- bool posix_locking = 0;
+ struct cifsLockInfo *lock, *conf_lock;
+ bool exist;
+ int rc = 0;
- length = 1 + pfLock->fl_end - pfLock->fl_start;
- rc = -EACCES;
- xid = GetXid();
+ lock = cifs_lock_init(length, offset, type, netfid);
+ if (!lock)
+ return -ENOMEM;
- cFYI(1, "Lock parm: 0x%x flockflags: "
- "0x%x flocktype: 0x%x start: %lld end: %lld",
- cmd, pfLock->fl_flags, pfLock->fl_type, pfLock->fl_start,
- pfLock->fl_end);
+try_again:
+ exist = false;
+ mutex_lock(&cinode->lock_mutex);
- if (pfLock->fl_flags & FL_POSIX)
- cFYI(1, "Posix");
- if (pfLock->fl_flags & FL_FLOCK)
- cFYI(1, "Flock");
- if (pfLock->fl_flags & FL_SLEEP) {
- cFYI(1, "Blocking lock");
- wait_flag = true;
+ exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
+ &conf_lock);
+ if (!exist && cinode->can_cache_brlcks) {
+ list_add_tail(&lock->llist, &cinode->llist);
+ mutex_unlock(&cinode->lock_mutex);
+ return rc;
}
- if (pfLock->fl_flags & FL_ACCESS)
- cFYI(1, "Process suspended by mandatory locking - "
- "not implemented yet");
- if (pfLock->fl_flags & FL_LEASE)
- cFYI(1, "Lease on file - not implemented yet");
- if (pfLock->fl_flags &
- (~(FL_POSIX | FL_FLOCK | FL_SLEEP | FL_ACCESS | FL_LEASE)))
- cFYI(1, "Unknown lock flags 0x%x", pfLock->fl_flags);
- if (pfLock->fl_type == F_WRLCK) {
- cFYI(1, "F_WRLCK ");
- numLock = 1;
- } else if (pfLock->fl_type == F_UNLCK) {
- cFYI(1, "F_UNLCK");
- numUnlock = 1;
- /* Check if unlock includes more than
- one lock range */
- } else if (pfLock->fl_type == F_RDLCK) {
- cFYI(1, "F_RDLCK");
- lockType |= LOCKING_ANDX_SHARED_LOCK;
- numLock = 1;
- } else if (pfLock->fl_type == F_EXLCK) {
- cFYI(1, "F_EXLCK");
- numLock = 1;
- } else if (pfLock->fl_type == F_SHLCK) {
- cFYI(1, "F_SHLCK");
- lockType |= LOCKING_ANDX_SHARED_LOCK;
- numLock = 1;
- } else
- cFYI(1, "Unknown type of lock");
-
- cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
- tcon = tlink_tcon(((struct cifsFileInfo *)file->private_data)->tlink);
- netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
-
- if ((tcon->ses->capabilities & CAP_UNIX) &&
- (CIFS_UNIX_FCNTL_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability)) &&
- ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOPOSIXBRL) == 0))
- posix_locking = 1;
- /* BB add code here to normalize offset and length to
- account for negative length which we can not accept over the
- wire */
- if (IS_GETLK(cmd)) {
- if (posix_locking) {
- int posix_lock_type;
- if (lockType & LOCKING_ANDX_SHARED_LOCK)
- posix_lock_type = CIFS_RDLCK;
- else
- posix_lock_type = CIFS_WRLCK;
- rc = CIFSSMBPosixLock(xid, tcon, netfid, 1 /* get */,
- length, pfLock, posix_lock_type,
- wait_flag);
- FreeXid(xid);
- return rc;
+ if (!exist)
+ rc = 1;
+ else if (!wait)
+ rc = -EACCES;
+ else {
+ list_add_tail(&lock->blist, &conf_lock->blist);
+ mutex_unlock(&cinode->lock_mutex);
+ rc = wait_event_interruptible(lock->block_q,
+ (lock->blist.prev == &lock->blist) &&
+ (lock->blist.next == &lock->blist));
+ if (!rc)
+ goto try_again;
+ else {
+ mutex_lock(&cinode->lock_mutex);
+ list_del_init(&lock->blist);
+ mutex_unlock(&cinode->lock_mutex);
}
+ }
- /* BB we could chain these into one lock request BB */
- rc = CIFSSMBLock(xid, tcon, netfid, length, pfLock->fl_start,
- 0, 1, lockType, 0 /* wait flag */, 0);
- if (rc == 0) {
- rc = CIFSSMBLock(xid, tcon, netfid, length,
- pfLock->fl_start, 1 /* numUnlock */ ,
- 0 /* numLock */ , lockType,
- 0 /* wait flag */, 0);
- pfLock->fl_type = F_UNLCK;
- if (rc != 0)
- cERROR(1, "Error unlocking previously locked "
- "range %d during test of lock", rc);
- rc = 0;
+ kfree(lock);
+ mutex_unlock(&cinode->lock_mutex);
+ return rc;
+}
- } else {
- /* if rc == ERR_SHARING_VIOLATION ? */
- rc = 0;
+static int
+cifs_posix_lock_test(struct file *file, struct file_lock *flock)
+{
+ int rc = 0;
+ struct cifsInodeInfo *cinode = CIFS_I(file->f_path.dentry->d_inode);
+ unsigned char saved_type = flock->fl_type;
- if (lockType & LOCKING_ANDX_SHARED_LOCK) {
- pfLock->fl_type = F_WRLCK;
- } else {
- rc = CIFSSMBLock(xid, tcon, netfid, length,
- pfLock->fl_start, 0, 1,
- lockType | LOCKING_ANDX_SHARED_LOCK,
- 0 /* wait flag */, 0);
- if (rc == 0) {
- rc = CIFSSMBLock(xid, tcon, netfid,
- length, pfLock->fl_start, 1, 0,
- lockType |
- LOCKING_ANDX_SHARED_LOCK,
- 0 /* wait flag */, 0);
- pfLock->fl_type = F_RDLCK;
- if (rc != 0)
- cERROR(1, "Error unlocking "
- "previously locked range %d "
- "during test of lock", rc);
- rc = 0;
- } else {
- pfLock->fl_type = F_WRLCK;
- rc = 0;
- }
- }
- }
+ mutex_lock(&cinode->lock_mutex);
+ posix_test_lock(file, flock);
+ if (flock->fl_type == F_UNLCK && !cinode->can_cache_brlcks) {
+ flock->fl_type = saved_type;
+ rc = 1;
+ }
+
+ mutex_unlock(&cinode->lock_mutex);
+ return rc;
+}
+
+static int
+cifs_posix_lock_set(struct file *file, struct file_lock *flock)
+{
+ struct cifsInodeInfo *cinode = CIFS_I(file->f_path.dentry->d_inode);
+ int rc;
+
+ mutex_lock(&cinode->lock_mutex);
+ if (!cinode->can_cache_brlcks) {
+ mutex_unlock(&cinode->lock_mutex);
+ return 1;
+ }
+ rc = posix_lock_file_wait(file, flock);
+ mutex_unlock(&cinode->lock_mutex);
+ return rc;
+}
+
+static int
+cifs_push_mandatory_locks(struct cifsFileInfo *cfile)
+{
+ int xid, rc = 0, stored_rc;
+ struct cifsLockInfo *li, *tmp;
+ struct cifs_tcon *tcon;
+ struct cifsInodeInfo *cinode = CIFS_I(cfile->dentry->d_inode);
+ unsigned int num, max_num;
+ LOCKING_ANDX_RANGE *buf, *cur;
+ int types[] = {LOCKING_ANDX_LARGE_FILES,
+ LOCKING_ANDX_SHARED_LOCK | LOCKING_ANDX_LARGE_FILES};
+ int i;
+
+ xid = GetXid();
+ tcon = tlink_tcon(cfile->tlink);
+
+ mutex_lock(&cinode->lock_mutex);
+ if (!cinode->can_cache_brlcks) {
+ mutex_unlock(&cinode->lock_mutex);
FreeXid(xid);
return rc;
}
- if (!numLock && !numUnlock) {
- /* if no lock or unlock then nothing
- to do since we do not know what it is */
+ max_num = (tcon->ses->server->maxBuf - sizeof(struct smb_hdr)) /
+ sizeof(LOCKING_ANDX_RANGE);
+ buf = kzalloc(max_num * sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL);
+ if (!buf) {
+ mutex_unlock(&cinode->lock_mutex);
FreeXid(xid);
- return -EOPNOTSUPP;
+ return rc;
}
- if (posix_locking) {
+ for (i = 0; i < 2; i++) {
+ cur = buf;
+ num = 0;
+ list_for_each_entry_safe(li, tmp, &cinode->llist, llist) {
+ if (li->type != types[i])
+ continue;
+ cur->Pid = cpu_to_le16(li->pid);
+ cur->LengthLow = cpu_to_le32((u32)li->length);
+ cur->LengthHigh = cpu_to_le32((u32)(li->length>>32));
+ cur->OffsetLow = cpu_to_le32((u32)li->offset);
+ cur->OffsetHigh = cpu_to_le32((u32)(li->offset>>32));
+ if (++num == max_num) {
+ stored_rc = cifs_lockv(xid, tcon, cfile->netfid,
+ li->type, 0, num, buf);
+ if (stored_rc)
+ rc = stored_rc;
+ cur = buf;
+ num = 0;
+ } else
+ cur++;
+ }
+
+ if (num) {
+ stored_rc = cifs_lockv(xid, tcon, cfile->netfid,
+ types[i], 0, num, buf);
+ if (stored_rc)
+ rc = stored_rc;
+ }
+ }
+
+ cinode->can_cache_brlcks = false;
+ mutex_unlock(&cinode->lock_mutex);
+
+ kfree(buf);
+ FreeXid(xid);
+ return rc;
+}
+
+/* copied from fs/locks.c with a name change */
+#define cifs_for_each_lock(inode, lockp) \
+ for (lockp = &inode->i_flock; *lockp != NULL; \
+ lockp = &(*lockp)->fl_next)
+
+static int
+cifs_push_posix_locks(struct cifsFileInfo *cfile)
+{
+ struct cifsInodeInfo *cinode = CIFS_I(cfile->dentry->d_inode);
+ struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
+ struct file_lock *flock, **before;
+ struct cifsLockInfo *lck, *tmp;
+ int rc = 0, xid, type;
+ __u64 length;
+ struct list_head locks_to_send;
+
+ xid = GetXid();
+
+ mutex_lock(&cinode->lock_mutex);
+ if (!cinode->can_cache_brlcks) {
+ mutex_unlock(&cinode->lock_mutex);
+ FreeXid(xid);
+ return rc;
+ }
+
+ INIT_LIST_HEAD(&locks_to_send);
+
+ lock_flocks();
+ cifs_for_each_lock(cfile->dentry->d_inode, before) {
+ flock = *before;
+ length = 1 + flock->fl_end - flock->fl_start;
+ if (flock->fl_type == F_RDLCK || flock->fl_type == F_SHLCK)
+ type = CIFS_RDLCK;
+ else
+ type = CIFS_WRLCK;
+
+ lck = cifs_lock_init(length, flock->fl_start, type,
+ cfile->netfid);
+ if (!lck) {
+ rc = -ENOMEM;
+ goto send_locks;
+ }
+ lck->pid = flock->fl_pid;
+
+ list_add_tail(&lck->llist, &locks_to_send);
+ }
+
+send_locks:
+ unlock_flocks();
+
+ list_for_each_entry_safe(lck, tmp, &locks_to_send, llist) {
+ struct file_lock tmp_lock;
+ int stored_rc;
+
+ tmp_lock.fl_start = lck->offset;
+ stored_rc = CIFSSMBPosixLock(xid, tcon, lck->netfid, lck->pid,
+ 0, lck->length, &tmp_lock,
+ lck->type, 0);
+ if (stored_rc)
+ rc = stored_rc;
+ list_del(&lck->llist);
+ kfree(lck);
+ }
+
+ cinode->can_cache_brlcks = false;
+ mutex_unlock(&cinode->lock_mutex);
+
+ FreeXid(xid);
+ return rc;
+}
+
+static int
+cifs_push_locks(struct cifsFileInfo *cfile)
+{
+ struct cifs_sb_info *cifs_sb = CIFS_SB(cfile->dentry->d_sb);
+ struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
+
+ if ((tcon->ses->capabilities & CAP_UNIX) &&
+ (CIFS_UNIX_FCNTL_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability)) &&
+ ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOPOSIXBRL) == 0))
+ return cifs_push_posix_locks(cfile);
+
+ return cifs_push_mandatory_locks(cfile);
+}
+
+static void
+cifs_read_flock(struct file_lock *flock, __u8 *type, int *lock, int *unlock,
+ bool *wait_flag)
+{
+ if (flock->fl_flags & FL_POSIX)
+ cFYI(1, "Posix");
+ if (flock->fl_flags & FL_FLOCK)
+ cFYI(1, "Flock");
+ if (flock->fl_flags & FL_SLEEP) {
+ cFYI(1, "Blocking lock");
+ *wait_flag = true;
+ }
+ if (flock->fl_flags & FL_ACCESS)
+ cFYI(1, "Process suspended by mandatory locking - "
+ "not implemented yet");
+ if (flock->fl_flags & FL_LEASE)
+ cFYI(1, "Lease on file - not implemented yet");
+ if (flock->fl_flags &
+ (~(FL_POSIX | FL_FLOCK | FL_SLEEP | FL_ACCESS | FL_LEASE)))
+ cFYI(1, "Unknown lock flags 0x%x", flock->fl_flags);
+
+ *type = LOCKING_ANDX_LARGE_FILES;
+ if (flock->fl_type == F_WRLCK) {
+ cFYI(1, "F_WRLCK ");
+ *lock = 1;
+ } else if (flock->fl_type == F_UNLCK) {
+ cFYI(1, "F_UNLCK");
+ *unlock = 1;
+ /* Check if unlock includes more than one lock range */
+ } else if (flock->fl_type == F_RDLCK) {
+ cFYI(1, "F_RDLCK");
+ *type |= LOCKING_ANDX_SHARED_LOCK;
+ *lock = 1;
+ } else if (flock->fl_type == F_EXLCK) {
+ cFYI(1, "F_EXLCK");
+ *lock = 1;
+ } else if (flock->fl_type == F_SHLCK) {
+ cFYI(1, "F_SHLCK");
+ *type |= LOCKING_ANDX_SHARED_LOCK;
+ *lock = 1;
+ } else
+ cFYI(1, "Unknown type of lock");
+}
+
+static int
+cifs_getlk(struct file *file, struct file_lock *flock, __u8 type,
+ bool wait_flag, bool posix_lck, int xid)
+{
+ int rc = 0;
+ __u64 length = 1 + flock->fl_end - flock->fl_start;
+ struct cifsFileInfo *cfile = (struct cifsFileInfo *)file->private_data;
+ struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
+ struct cifsInodeInfo *cinode = CIFS_I(cfile->dentry->d_inode);
+ __u16 netfid = cfile->netfid;
+
+ if (posix_lck) {
int posix_lock_type;
- if (lockType & LOCKING_ANDX_SHARED_LOCK)
+
+ rc = cifs_posix_lock_test(file, flock);
+ if (!rc)
+ return rc;
+
+ if (type & LOCKING_ANDX_SHARED_LOCK)
+ posix_lock_type = CIFS_RDLCK;
+ else
+ posix_lock_type = CIFS_WRLCK;
+ rc = CIFSSMBPosixLock(xid, tcon, netfid, current->tgid,
+ 1 /* get */, length, flock,
+ posix_lock_type, wait_flag);
+ return rc;
+ }
+
+ rc = cifs_lock_test(cinode, flock->fl_start, length, type, netfid,
+ flock);
+ if (!rc)
+ return rc;
+
+ /* BB we could chain these into one lock request BB */
+ rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
+ flock->fl_start, 0, 1, type, 0, 0);
+ if (rc == 0) {
+ rc = CIFSSMBLock(xid, tcon, netfid, current->tgid,
+ length, flock->fl_start, 1, 0,
+ type, 0, 0);
+ flock->fl_type = F_UNLCK;
+ if (rc != 0)
+ cERROR(1, "Error unlocking previously locked "
+ "range %d during test of lock", rc);
+ rc = 0;
+ return rc;
+ }
+
+ if (type & LOCKING_ANDX_SHARED_LOCK) {
+ flock->fl_type = F_WRLCK;
+ rc = 0;
+ return rc;
+ }
+
+ rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
+ flock->fl_start, 0, 1,
+ type | LOCKING_ANDX_SHARED_LOCK, 0, 0);
+ if (rc == 0) {
+ rc = CIFSSMBLock(xid, tcon, netfid, current->tgid,
+ length, flock->fl_start, 1, 0,
+ type | LOCKING_ANDX_SHARED_LOCK,
+ 0, 0);
+ flock->fl_type = F_RDLCK;
+ if (rc != 0)
+ cERROR(1, "Error unlocking previously locked "
+ "range %d during test of lock", rc);
+ } else
+ flock->fl_type = F_WRLCK;
+
+ rc = 0;
+ return rc;
+}
+
+static void
+cifs_move_llist(struct list_head *source, struct list_head *dest)
+{
+ struct list_head *li, *tmp;
+ list_for_each_safe(li, tmp, source)
+ list_move(li, dest);
+}
+
+static void
+cifs_free_llist(struct list_head *llist)
+{
+ struct cifsLockInfo *li, *tmp;
+ list_for_each_entry_safe(li, tmp, llist, llist) {
+ cifs_del_lock_waiters(li);
+ list_del(&li->llist);
+ kfree(li);
+ }
+}
+
+static int
+cifs_unlock_range(struct cifsFileInfo *cfile, struct file_lock *flock, int xid)
+{
+ int rc = 0, stored_rc;
+ int types[] = {LOCKING_ANDX_LARGE_FILES,
+ LOCKING_ANDX_SHARED_LOCK | LOCKING_ANDX_LARGE_FILES};
+ unsigned int i;
+ unsigned int max_num, num;
+ LOCKING_ANDX_RANGE *buf, *cur;
+ struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
+ struct cifsInodeInfo *cinode = CIFS_I(cfile->dentry->d_inode);
+ struct cifsLockInfo *li, *tmp;
+ __u64 length = 1 + flock->fl_end - flock->fl_start;
+ struct list_head tmp_llist;
+
+ INIT_LIST_HEAD(&tmp_llist);
+
+ max_num = (tcon->ses->server->maxBuf - sizeof(struct smb_hdr)) /
+ sizeof(LOCKING_ANDX_RANGE);
+ buf = kzalloc(max_num * sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ mutex_lock(&cinode->lock_mutex);
+ for (i = 0; i < 2; i++) {
+ cur = buf;
+ num = 0;
+ list_for_each_entry_safe(li, tmp, &cinode->llist, llist) {
+ if (flock->fl_start > li->offset ||
+ (flock->fl_start + length) <
+ (li->offset + li->length))
+ continue;
+ if (current->tgid != li->pid)
+ continue;
+ if (cfile->netfid != li->netfid)
+ continue;
+ if (types[i] != li->type)
+ continue;
+ if (!cinode->can_cache_brlcks) {
+ cur->Pid = cpu_to_le16(li->pid);
+ cur->LengthLow = cpu_to_le32((u32)li->length);
+ cur->LengthHigh =
+ cpu_to_le32((u32)(li->length>>32));
+ cur->OffsetLow = cpu_to_le32((u32)li->offset);
+ cur->OffsetHigh =
+ cpu_to_le32((u32)(li->offset>>32));
+ /*
+ * We need to save a lock here to let us add
+ * it again to the inode list if the unlock
+ * range request fails on the server.
+ */
+ list_move(&li->llist, &tmp_llist);
+ if (++num == max_num) {
+ stored_rc = cifs_lockv(xid, tcon,
+ cfile->netfid,
+ li->type, num,
+ 0, buf);
+ if (stored_rc) {
+ /*
+ * We failed on the unlock range
+ * request - add all locks from
+ * the tmp list to the head of
+ * the inode list.
+ */
+ cifs_move_llist(&tmp_llist,
+ &cinode->llist);
+ rc = stored_rc;
+ } else
+ /*
+ * The unlock range request
+ * succeed - free the tmp list.
+ */
+ cifs_free_llist(&tmp_llist);
+ cur = buf;
+ num = 0;
+ } else
+ cur++;
+ } else {
+ /*
+ * We can cache brlock requests - simply remove
+ * a lock from the inode list.
+ */
+ list_del(&li->llist);
+ cifs_del_lock_waiters(li);
+ kfree(li);
+ }
+ }
+ if (num) {
+ stored_rc = cifs_lockv(xid, tcon, cfile->netfid,
+ types[i], num, 0, buf);
+ if (stored_rc) {
+ cifs_move_llist(&tmp_llist, &cinode->llist);
+ rc = stored_rc;
+ } else
+ cifs_free_llist(&tmp_llist);
+ }
+ }
+
+ mutex_unlock(&cinode->lock_mutex);
+ kfree(buf);
+ return rc;
+}
+
+static int
+cifs_setlk(struct file *file, struct file_lock *flock, __u8 type,
+ bool wait_flag, bool posix_lck, int lock, int unlock, int xid)
+{
+ int rc = 0;
+ __u64 length = 1 + flock->fl_end - flock->fl_start;
+ struct cifsFileInfo *cfile = (struct cifsFileInfo *)file->private_data;
+ struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
+ struct cifsInodeInfo *cinode = CIFS_I(file->f_path.dentry->d_inode);
+ __u16 netfid = cfile->netfid;
+
+ if (posix_lck) {
+ int posix_lock_type;
+
+ rc = cifs_posix_lock_set(file, flock);
+ if (!rc || rc < 0)
+ return rc;
+
+ if (type & LOCKING_ANDX_SHARED_LOCK)
posix_lock_type = CIFS_RDLCK;
else
posix_lock_type = CIFS_WRLCK;
- if (numUnlock == 1)
+ if (unlock == 1)
posix_lock_type = CIFS_UNLCK;
- rc = CIFSSMBPosixLock(xid, tcon, netfid, 0 /* set */,
- length, pfLock, posix_lock_type,
- wait_flag);
- } else {
- struct cifsFileInfo *fid = file->private_data;
-
- if (numLock) {
- rc = CIFSSMBLock(xid, tcon, netfid, length,
- pfLock->fl_start, 0, numLock, lockType,
- wait_flag, 0);
-
- if (rc == 0) {
- /* For Windows locks we must store them. */
- rc = store_file_lock(fid, length,
- pfLock->fl_start, lockType);
- }
- } else if (numUnlock) {
- /* For each stored lock that this unlock overlaps
- completely, unlock it. */
- int stored_rc = 0;
- struct cifsLockInfo *li, *tmp;
-
- rc = 0;
- mutex_lock(&fid->lock_mutex);
- list_for_each_entry_safe(li, tmp, &fid->llist, llist) {
- if (pfLock->fl_start <= li->offset &&
- (pfLock->fl_start + length) >=
- (li->offset + li->length)) {
- stored_rc = CIFSSMBLock(xid, tcon,
- netfid, li->length,
- li->offset, 1, 0,
- li->type, false, 0);
- if (stored_rc)
- rc = stored_rc;
- else {
- list_del(&li->llist);
- kfree(li);
- }
- }
- }
- mutex_unlock(&fid->lock_mutex);
- }
+ rc = CIFSSMBPosixLock(xid, tcon, netfid, current->tgid,
+ 0 /* set */, length, flock,
+ posix_lock_type, wait_flag);
+ goto out;
}
- if (pfLock->fl_flags & FL_POSIX)
- posix_lock_file_wait(file, pfLock);
+ if (lock) {
+ rc = cifs_lock_add_if(cinode, flock->fl_start, length,
+ type, netfid, wait_flag);
+ if (rc < 0)
+ return rc;
+ else if (!rc)
+ goto out;
+
+ rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
+ flock->fl_start, 0, 1, type, wait_flag, 0);
+ if (rc == 0) {
+ /* For Windows locks we must store them. */
+ rc = cifs_lock_add(cinode, length, flock->fl_start,
+ type, netfid);
+ }
+ } else if (unlock)
+ rc = cifs_unlock_range(cfile, flock, xid);
+
+out:
+ if (flock->fl_flags & FL_POSIX)
+ posix_lock_file_wait(file, flock);
+ return rc;
+}
+
+int cifs_lock(struct file *file, int cmd, struct file_lock *flock)
+{
+ int rc, xid;
+ int lock = 0, unlock = 0;
+ bool wait_flag = false;
+ bool posix_lck = false;
+ struct cifs_sb_info *cifs_sb;
+ struct cifs_tcon *tcon;
+ struct cifsInodeInfo *cinode;
+ struct cifsFileInfo *cfile;
+ __u16 netfid;
+ __u8 type;
+
+ rc = -EACCES;
+ xid = GetXid();
+
+ cFYI(1, "Lock parm: 0x%x flockflags: 0x%x flocktype: 0x%x start: %lld "
+ "end: %lld", cmd, flock->fl_flags, flock->fl_type,
+ flock->fl_start, flock->fl_end);
+
+ cifs_read_flock(flock, &type, &lock, &unlock, &wait_flag);
+
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
+ cfile = (struct cifsFileInfo *)file->private_data;
+ tcon = tlink_tcon(cfile->tlink);
+ netfid = cfile->netfid;
+ cinode = CIFS_I(file->f_path.dentry->d_inode);
+
+ if ((tcon->ses->capabilities & CAP_UNIX) &&
+ (CIFS_UNIX_FCNTL_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability)) &&
+ ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOPOSIXBRL) == 0))
+ posix_lck = true;
+ /*
+ * BB add code here to normalize offset and length to account for
+ * negative length which we can not accept over the wire.
+ */
+ if (IS_GETLK(cmd)) {
+ rc = cifs_getlk(file, flock, type, wait_flag, posix_lck, xid);
+ FreeXid(xid);
+ return rc;
+ }
+
+ if (!lock && !unlock) {
+ /*
+ * if no lock or unlock then nothing to do since we do not
+ * know what it is
+ */
+ FreeXid(xid);
+ return -EOPNOTSUPP;
+ }
+
+ rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock,
+ xid);
FreeXid(xid);
return rc;
}
@@ -1714,6 +2195,7 @@
struct smb_com_read_rsp *pSMBr;
struct cifs_io_parms io_parms;
char *read_data;
+ unsigned int rsize;
__u32 pid;
if (!nr_segs)
@@ -1726,6 +2208,9 @@
xid = GetXid();
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
+ /* FIXME: set up handlers for larger reads and/or convert to async */
+ rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize);
+
open_file = file->private_data;
pTcon = tlink_tcon(open_file->tlink);
@@ -1738,7 +2223,7 @@
cFYI(1, "attempting read on write only file instance");
for (total_read = 0; total_read < len; total_read += bytes_read) {
- cur_len = min_t(const size_t, len - total_read, cifs_sb->rsize);
+ cur_len = min_t(const size_t, len - total_read, rsize);
rc = -EAGAIN;
read_data = NULL;
@@ -1830,6 +2315,7 @@
unsigned int bytes_read = 0;
unsigned int total_read;
unsigned int current_read_size;
+ unsigned int rsize;
struct cifs_sb_info *cifs_sb;
struct cifs_tcon *pTcon;
int xid;
@@ -1842,6 +2328,9 @@
xid = GetXid();
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
+ /* FIXME: set up handlers for larger reads and/or convert to async */
+ rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize);
+
if (file->private_data == NULL) {
rc = -EBADF;
FreeXid(xid);
@@ -1861,14 +2350,14 @@
for (total_read = 0, current_offset = read_data;
read_size > total_read;
total_read += bytes_read, current_offset += bytes_read) {
- current_read_size = min_t(const int, read_size - total_read,
- cifs_sb->rsize);
+ current_read_size = min_t(uint, read_size - total_read, rsize);
+
/* For windows me and 9x we do not want to request more
than it negotiated since it will refuse the read then */
if ((pTcon->ses) &&
!(pTcon->ses->capabilities & CAP_LARGE_FILES)) {
- current_read_size = min_t(const int, current_read_size,
- pTcon->ses->server->maxBuf - 128);
+ current_read_size = min_t(uint, current_read_size,
+ CIFSMaxBufSize);
}
rc = -EAGAIN;
while (rc == -EAGAIN) {
@@ -1957,82 +2446,24 @@
return rc;
}
-
-static void cifs_copy_cache_pages(struct address_space *mapping,
- struct list_head *pages, int bytes_read, char *data)
-{
- struct page *page;
- char *target;
-
- while (bytes_read > 0) {
- if (list_empty(pages))
- break;
-
- page = list_entry(pages->prev, struct page, lru);
- list_del(&page->lru);
-
- if (add_to_page_cache_lru(page, mapping, page->index,
- GFP_KERNEL)) {
- page_cache_release(page);
- cFYI(1, "Add page cache failed");
- data += PAGE_CACHE_SIZE;
- bytes_read -= PAGE_CACHE_SIZE;
- continue;
- }
- page_cache_release(page);
-
- target = kmap_atomic(page, KM_USER0);
-
- if (PAGE_CACHE_SIZE > bytes_read) {
- memcpy(target, data, bytes_read);
- /* zero the tail end of this partial page */
- memset(target + bytes_read, 0,
- PAGE_CACHE_SIZE - bytes_read);
- bytes_read = 0;
- } else {
- memcpy(target, data, PAGE_CACHE_SIZE);
- bytes_read -= PAGE_CACHE_SIZE;
- }
- kunmap_atomic(target, KM_USER0);
-
- flush_dcache_page(page);
- SetPageUptodate(page);
- unlock_page(page);
- data += PAGE_CACHE_SIZE;
-
- /* add page to FS-Cache */
- cifs_readpage_to_fscache(mapping->host, page);
- }
- return;
-}
-
static int cifs_readpages(struct file *file, struct address_space *mapping,
struct list_head *page_list, unsigned num_pages)
{
- int rc = -EACCES;
- int xid;
- loff_t offset;
- struct page *page;
- struct cifs_sb_info *cifs_sb;
- struct cifs_tcon *pTcon;
- unsigned int bytes_read = 0;
- unsigned int read_size, i;
- char *smb_read_data = NULL;
- struct smb_com_read_rsp *pSMBr;
- struct cifsFileInfo *open_file;
- struct cifs_io_parms io_parms;
- int buf_type = CIFS_NO_BUFFER;
- __u32 pid;
+ int rc;
+ struct list_head tmplist;
+ struct cifsFileInfo *open_file = file->private_data;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
+ unsigned int rsize = cifs_sb->rsize;
+ pid_t pid;
- xid = GetXid();
- if (file->private_data == NULL) {
- rc = -EBADF;
- FreeXid(xid);
- return rc;
- }
- open_file = file->private_data;
- cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
- pTcon = tlink_tcon(open_file->tlink);
+ /*
+ * Give up immediately if rsize is too small to read an entire page.
+ * The VFS will fall back to readpage. We should never reach this
+ * point however since we set ra_pages to 0 when the rsize is smaller
+ * than a cache page.
+ */
+ if (unlikely(rsize < PAGE_CACHE_SIZE))
+ return 0;
/*
* Reads as many pages as possible from fscache. Returns -ENOBUFS
@@ -2041,125 +2472,127 @@
rc = cifs_readpages_from_fscache(mapping->host, mapping, page_list,
&num_pages);
if (rc == 0)
- goto read_complete;
+ return rc;
- cFYI(DBG2, "rpages: num pages %d", num_pages);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD)
pid = open_file->pid;
else
pid = current->tgid;
- for (i = 0; i < num_pages; ) {
- unsigned contig_pages;
- struct page *tmp_page;
- unsigned long expected_index;
+ rc = 0;
+ INIT_LIST_HEAD(&tmplist);
- if (list_empty(page_list))
- break;
+ cFYI(1, "%s: file=%p mapping=%p num_pages=%u", __func__, file,
+ mapping, num_pages);
+
+ /*
+ * Start with the page at end of list and move it to private
+ * list. Do the same with any following pages until we hit
+ * the rsize limit, hit an index discontinuity, or run out of
+ * pages. Issue the async read and then start the loop again
+ * until the list is empty.
+ *
+ * Note that list order is important. The page_list is in
+ * the order of declining indexes. When we put the pages in
+ * the rdata->pages, then we want them in increasing order.
+ */
+ while (!list_empty(page_list)) {
+ unsigned int bytes = PAGE_CACHE_SIZE;
+ unsigned int expected_index;
+ unsigned int nr_pages = 1;
+ loff_t offset;
+ struct page *page, *tpage;
+ struct cifs_readdata *rdata;
page = list_entry(page_list->prev, struct page, lru);
- offset = (loff_t)page->index << PAGE_CACHE_SHIFT;
- /* count adjacent pages that we will read into */
- contig_pages = 0;
- expected_index =
- list_entry(page_list->prev, struct page, lru)->index;
- list_for_each_entry_reverse(tmp_page, page_list, lru) {
- if (tmp_page->index == expected_index) {
- contig_pages++;
- expected_index++;
- } else
- break;
+ /*
+ * Lock the page and put it in the cache. Since no one else
+ * should have access to this page, we're safe to simply set
+ * PG_locked without checking it first.
+ */
+ __set_page_locked(page);
+ rc = add_to_page_cache_locked(page, mapping,
+ page->index, GFP_KERNEL);
+
+ /* give up if we can't stick it in the cache */
+ if (rc) {
+ __clear_page_locked(page);
+ break;
}
- if (contig_pages + i > num_pages)
- contig_pages = num_pages - i;
- /* for reads over a certain size could initiate async
- read ahead */
+ /* move first page to the tmplist */
+ offset = (loff_t)page->index << PAGE_CACHE_SHIFT;
+ list_move_tail(&page->lru, &tmplist);
- read_size = contig_pages * PAGE_CACHE_SIZE;
- /* Read size needs to be in multiples of one page */
- read_size = min_t(const unsigned int, read_size,
- cifs_sb->rsize & PAGE_CACHE_MASK);
- cFYI(DBG2, "rpages: read size 0x%x contiguous pages %d",
- read_size, contig_pages);
- rc = -EAGAIN;
- while (rc == -EAGAIN) {
+ /* now try and add more pages onto the request */
+ expected_index = page->index + 1;
+ list_for_each_entry_safe_reverse(page, tpage, page_list, lru) {
+ /* discontinuity ? */
+ if (page->index != expected_index)
+ break;
+
+ /* would this page push the read over the rsize? */
+ if (bytes + PAGE_CACHE_SIZE > rsize)
+ break;
+
+ __set_page_locked(page);
+ if (add_to_page_cache_locked(page, mapping,
+ page->index, GFP_KERNEL)) {
+ __clear_page_locked(page);
+ break;
+ }
+ list_move_tail(&page->lru, &tmplist);
+ bytes += PAGE_CACHE_SIZE;
+ expected_index++;
+ nr_pages++;
+ }
+
+ rdata = cifs_readdata_alloc(nr_pages);
+ if (!rdata) {
+ /* best to give up if we're out of mem */
+ list_for_each_entry_safe(page, tpage, &tmplist, lru) {
+ list_del(&page->lru);
+ lru_cache_add_file(page);
+ unlock_page(page);
+ page_cache_release(page);
+ }
+ rc = -ENOMEM;
+ break;
+ }
+
+ spin_lock(&cifs_file_list_lock);
+ cifsFileInfo_get(open_file);
+ spin_unlock(&cifs_file_list_lock);
+ rdata->cfile = open_file;
+ rdata->mapping = mapping;
+ rdata->offset = offset;
+ rdata->bytes = bytes;
+ rdata->pid = pid;
+ list_splice_init(&tmplist, &rdata->pages);
+
+ do {
if (open_file->invalidHandle) {
rc = cifs_reopen_file(open_file, true);
if (rc != 0)
- break;
+ continue;
}
- io_parms.netfid = open_file->netfid;
- io_parms.pid = pid;
- io_parms.tcon = pTcon;
- io_parms.offset = offset;
- io_parms.length = read_size;
- rc = CIFSSMBRead(xid, &io_parms, &bytes_read,
- &smb_read_data, &buf_type);
- /* BB more RC checks ? */
- if (rc == -EAGAIN) {
- if (smb_read_data) {
- if (buf_type == CIFS_SMALL_BUFFER)
- cifs_small_buf_release(smb_read_data);
- else if (buf_type == CIFS_LARGE_BUFFER)
- cifs_buf_release(smb_read_data);
- smb_read_data = NULL;
- }
+ rc = cifs_async_readv(rdata);
+ } while (rc == -EAGAIN);
+
+ if (rc != 0) {
+ list_for_each_entry_safe(page, tpage, &rdata->pages,
+ lru) {
+ list_del(&page->lru);
+ lru_cache_add_file(page);
+ unlock_page(page);
+ page_cache_release(page);
}
- }
- if ((rc < 0) || (smb_read_data == NULL)) {
- cFYI(1, "Read error in readpages: %d", rc);
- break;
- } else if (bytes_read > 0) {
- task_io_account_read(bytes_read);
- pSMBr = (struct smb_com_read_rsp *)smb_read_data;
- cifs_copy_cache_pages(mapping, page_list, bytes_read,
- smb_read_data + 4 /* RFC1001 hdr */ +
- le16_to_cpu(pSMBr->DataOffset));
-
- i += bytes_read >> PAGE_CACHE_SHIFT;
- cifs_stats_bytes_read(pTcon, bytes_read);
- if ((bytes_read & PAGE_CACHE_MASK) != bytes_read) {
- i++; /* account for partial page */
-
- /* server copy of file can have smaller size
- than client */
- /* BB do we need to verify this common case ?
- this case is ok - if we are at server EOF
- we will hit it on next read */
-
- /* break; */
- }
- } else {
- cFYI(1, "No bytes read (%d) at offset %lld . "
- "Cleaning remaining pages from readahead list",
- bytes_read, offset);
- /* BB turn off caching and do new lookup on
- file size at server? */
+ cifs_readdata_free(rdata);
break;
}
- if (smb_read_data) {
- if (buf_type == CIFS_SMALL_BUFFER)
- cifs_small_buf_release(smb_read_data);
- else if (buf_type == CIFS_LARGE_BUFFER)
- cifs_buf_release(smb_read_data);
- smb_read_data = NULL;
- }
- bytes_read = 0;
}
-/* need to free smb_read_data buf before exit */
- if (smb_read_data) {
- if (buf_type == CIFS_SMALL_BUFFER)
- cifs_small_buf_release(smb_read_data);
- else if (buf_type == CIFS_LARGE_BUFFER)
- cifs_buf_release(smb_read_data);
- smb_read_data = NULL;
- }
-
-read_complete:
- FreeXid(xid);
return rc;
}
@@ -2408,6 +2841,10 @@
cFYI(1, "Oplock flush inode %p rc %d", inode, rc);
}
+ rc = cifs_push_locks(cfile);
+ if (rc)
+ cERROR(1, "Push locks rc = %d", rc);
+
/*
* releasing stale oplock after recent reconnect of smb session using
* a now incorrect file handle is not a data integrity issue but do
@@ -2415,8 +2852,9 @@
* disconnected since oplock already released by the server
*/
if (!cfile->oplock_break_cancelled) {
- rc = CIFSSMBLock(0, tlink_tcon(cfile->tlink), cfile->netfid, 0,
- 0, 0, 0, LOCKING_ANDX_OPLOCK_RELEASE, false,
+ rc = CIFSSMBLock(0, tlink_tcon(cfile->tlink), cfile->netfid,
+ current->tgid, 0, 0, 0, 0,
+ LOCKING_ANDX_OPLOCK_RELEASE, false,
cinode->clientCanCacheRead ? 1 : 0);
cFYI(1, "Oplock release rc = %d", rc);
}
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index a7b2dcd..e851d5b 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -132,7 +132,7 @@
inode->i_mtime = fattr->cf_mtime;
inode->i_ctime = fattr->cf_ctime;
inode->i_rdev = fattr->cf_rdev;
- inode->i_nlink = fattr->cf_nlink;
+ set_nlink(inode, fattr->cf_nlink);
inode->i_uid = fattr->cf_uid;
inode->i_gid = fattr->cf_gid;
@@ -562,7 +562,16 @@
xid = GetXid();
rc = CIFSSMBQFileInfo(xid, tcon, cfile->netfid, &find_data);
- if (rc == -EOPNOTSUPP || rc == -EINVAL) {
+ switch (rc) {
+ case 0:
+ cifs_all_info_to_fattr(&fattr, &find_data, cifs_sb, false);
+ break;
+ case -EREMOTE:
+ cifs_create_dfs_fattr(&fattr, inode->i_sb);
+ rc = 0;
+ break;
+ case -EOPNOTSUPP:
+ case -EINVAL:
/*
* FIXME: legacy server -- fall back to path-based call?
* for now, just skip revalidating and mark inode for
@@ -570,18 +579,14 @@
*/
rc = 0;
CIFS_I(inode)->time = 0;
+ default:
goto cgfi_exit;
- } else if (rc == -EREMOTE) {
- cifs_create_dfs_fattr(&fattr, inode->i_sb);
- rc = 0;
- } else if (rc)
- goto cgfi_exit;
+ }
/*
* don't bother with SFU junk here -- just mark inode as needing
* revalidation.
*/
- cifs_all_info_to_fattr(&fattr, &find_data, cifs_sb, false);
fattr.cf_uniqueid = CIFS_I(inode)->uniqueid;
fattr.cf_flags |= CIFS_FATTR_NEED_REVAL;
cifs_fattr_to_inode(inode, &fattr);
@@ -900,7 +905,7 @@
if (rc && tcon->ipc) {
cFYI(1, "ipc connection - fake read inode");
inode->i_mode |= S_IFDIR;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_op = &cifs_ipc_inode_ops;
inode->i_fop = &simple_dir_operations;
inode->i_uid = cifs_sb->mnt_uid;
@@ -1362,7 +1367,7 @@
/* setting nlink not necessary except in cases where we
* failed to get it from the server or was set bogus */
if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2))
- direntry->d_inode->i_nlink = 2;
+ set_nlink(direntry->d_inode, 2);
mode &= ~current_umask();
/* must turn on setgid bit if parent dir has it */
@@ -2096,6 +2101,8 @@
cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
{
int xid;
+ uid_t uid = NO_CHANGE_32;
+ gid_t gid = NO_CHANGE_32;
struct inode *inode = direntry->d_inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
struct cifsInodeInfo *cifsInode = CIFS_I(inode);
@@ -2146,13 +2153,25 @@
goto cifs_setattr_exit;
}
- /*
- * Without unix extensions we can't send ownership changes to the
- * server, so silently ignore them. This is consistent with how
- * local DOS/Windows filesystems behave (VFAT, NTFS, etc). With
- * CIFSACL support + proper Windows to Unix idmapping, we may be
- * able to support this in the future.
- */
+ if (attrs->ia_valid & ATTR_UID)
+ uid = attrs->ia_uid;
+
+ if (attrs->ia_valid & ATTR_GID)
+ gid = attrs->ia_gid;
+
+#ifdef CONFIG_CIFS_ACL
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ if (uid != NO_CHANGE_32 || gid != NO_CHANGE_32) {
+ rc = id_mode_to_cifs_acl(inode, full_path, NO_CHANGE_64,
+ uid, gid);
+ if (rc) {
+ cFYI(1, "%s: Setting id failed with error: %d",
+ __func__, rc);
+ goto cifs_setattr_exit;
+ }
+ }
+ } else
+#endif /* CONFIG_CIFS_ACL */
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID))
attrs->ia_valid &= ~(ATTR_UID | ATTR_GID);
@@ -2161,15 +2180,12 @@
attrs->ia_valid &= ~ATTR_MODE;
if (attrs->ia_valid & ATTR_MODE) {
- cFYI(1, "Mode changed to 0%o", attrs->ia_mode);
mode = attrs->ia_mode;
- }
-
- if (attrs->ia_valid & ATTR_MODE) {
rc = 0;
#ifdef CONFIG_CIFS_ACL
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- rc = mode_to_cifs_acl(inode, full_path, mode);
+ rc = id_mode_to_cifs_acl(inode, full_path, mode,
+ NO_CHANGE_32, NO_CHANGE_32);
if (rc) {
cFYI(1, "%s: Setting ACL failed with error: %d",
__func__, rc);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index db3f18c..6b0e064 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -183,14 +183,20 @@
static int
CIFSCreateMFSymLink(const int xid, struct cifs_tcon *tcon,
const char *fromName, const char *toName,
- const struct nls_table *nls_codepage, int remap)
+ struct cifs_sb_info *cifs_sb)
{
int rc;
int oplock = 0;
+ int remap;
+ int create_options = CREATE_NOT_DIR;
__u16 netfid = 0;
u8 *buf;
unsigned int bytes_written = 0;
struct cifs_io_parms io_parms;
+ struct nls_table *nls_codepage;
+
+ nls_codepage = cifs_sb->local_nls;
+ remap = cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR;
buf = kmalloc(CIFS_MF_SYMLINK_FILE_SIZE, GFP_KERNEL);
if (!buf)
@@ -202,8 +208,11 @@
return rc;
}
+ if (backup_cred(cifs_sb))
+ create_options |= CREATE_OPEN_BACKUP_INTENT;
+
rc = CIFSSMBOpen(xid, tcon, fromName, FILE_CREATE, GENERIC_WRITE,
- CREATE_NOT_DIR, &netfid, &oplock, NULL,
+ create_options, &netfid, &oplock, NULL,
nls_codepage, remap);
if (rc != 0) {
kfree(buf);
@@ -424,7 +433,7 @@
if (old_file->d_inode) {
cifsInode = CIFS_I(old_file->d_inode);
if (rc == 0) {
- old_file->d_inode->i_nlink++;
+ inc_nlink(old_file->d_inode);
/* BB should we make this contingent on superblock flag NOATIME? */
/* old_file->d_inode->i_ctime = CURRENT_TIME;*/
/* parent dir timestamps will update from srv
@@ -559,9 +568,7 @@
/* BB what if DFS and this volume is on different share? BB */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MF_SYMLINKS)
rc = CIFSCreateMFSymLink(xid, pTcon, full_path, symname,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ cifs_sb);
else if (pTcon->unix_ext)
rc = CIFSUnixCreateSymLink(xid, pTcon, full_path, symname,
cifs_sb->local_nls);
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 7c16933..703ef5c 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -420,19 +420,22 @@
}
int
-checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length)
+checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int total_read)
{
- __u32 len = be32_to_cpu(smb->smb_buf_length);
+ __u32 rfclen = be32_to_cpu(smb->smb_buf_length);
__u32 clc_len; /* calculated length */
- cFYI(0, "checkSMB Length: 0x%x, smb_buf_length: 0x%x", length, len);
+ cFYI(0, "checkSMB Length: 0x%x, smb_buf_length: 0x%x",
+ total_read, rfclen);
- if (length < 2 + sizeof(struct smb_hdr)) {
- if ((length >= sizeof(struct smb_hdr) - 1)
+ /* is this frame too small to even get to a BCC? */
+ if (total_read < 2 + sizeof(struct smb_hdr)) {
+ if ((total_read >= sizeof(struct smb_hdr) - 1)
&& (smb->Status.CifsError != 0)) {
+ /* it's an error return */
smb->WordCount = 0;
/* some error cases do not return wct and bcc */
return 0;
- } else if ((length == sizeof(struct smb_hdr) + 1) &&
+ } else if ((total_read == sizeof(struct smb_hdr) + 1) &&
(smb->WordCount == 0)) {
char *tmp = (char *)smb;
/* Need to work around a bug in two servers here */
@@ -452,39 +455,35 @@
} else {
cERROR(1, "Length less than smb header size");
}
- return 1;
- }
- if (len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
- cERROR(1, "smb length greater than MaxBufSize, mid=%d",
- smb->Mid);
- return 1;
+ return -EIO;
}
+ /* otherwise, there is enough to get to the BCC */
if (check_smb_hdr(smb, mid))
- return 1;
+ return -EIO;
clc_len = smbCalcSize(smb);
- if (4 + len != length) {
+ if (4 + rfclen != total_read) {
cERROR(1, "Length read does not match RFC1001 length %d",
- len);
- return 1;
+ rfclen);
+ return -EIO;
}
- if (4 + len != clc_len) {
+ if (4 + rfclen != clc_len) {
/* check if bcc wrapped around for large read responses */
- if ((len > 64 * 1024) && (len > clc_len)) {
+ if ((rfclen > 64 * 1024) && (rfclen > clc_len)) {
/* check if lengths match mod 64K */
- if (((4 + len) & 0xFFFF) == (clc_len & 0xFFFF))
+ if (((4 + rfclen) & 0xFFFF) == (clc_len & 0xFFFF))
return 0; /* bcc wrapped */
}
cFYI(1, "Calculated size %u vs length %u mismatch for mid=%u",
- clc_len, 4 + len, smb->Mid);
+ clc_len, 4 + rfclen, smb->Mid);
- if (4 + len < clc_len) {
+ if (4 + rfclen < clc_len) {
cERROR(1, "RFC1001 size %u smaller than SMB for mid=%u",
- len, smb->Mid);
- return 1;
- } else if (len > clc_len + 512) {
+ rfclen, smb->Mid);
+ return -EIO;
+ } else if (rfclen > clc_len + 512) {
/*
* Some servers (Windows XP in particular) send more
* data than the lengths in the SMB packet would
@@ -495,8 +494,8 @@
* data to 512 bytes.
*/
cERROR(1, "RFC1001 size %u more than 512 bytes larger "
- "than SMB for mid=%u", len, smb->Mid);
- return 1;
+ "than SMB for mid=%u", rfclen, smb->Mid);
+ return -EIO;
}
}
return 0;
@@ -676,3 +675,18 @@
cinode->clientCanCacheRead = false;
}
}
+
+bool
+backup_cred(struct cifs_sb_info *cifs_sb)
+{
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPUID) {
+ if (cifs_sb->mnt_backupuid == current_fsuid())
+ return true;
+ }
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPGID) {
+ if (in_group_p(cifs_sb->mnt_backupgid))
+ return true;
+ }
+
+ return false;
+}
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index d3e6196..c7d80e2 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -124,7 +124,9 @@
/* that we use in next few lines */
/* Note that header is initialized to zero in header_assemble */
pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
+ pSMB->req.MaxBufferSize = cpu_to_le16(min_t(u32,
+ CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4,
+ USHRT_MAX));
pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
pSMB->req.VcNumber = get_next_vcnum(ses);
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index 42b9fff..ac1221d 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -265,91 +265,6 @@
return rc;
}
-#if 0 /* currently unused */
-/* Does both the NT and LM owfs of a user's password */
-static void
-nt_lm_owf_gen(char *pwd, unsigned char nt_p16[16], unsigned char p16[16])
-{
- char passwd[514];
-
- memset(passwd, '\0', 514);
- if (strlen(pwd) < 513)
- strcpy(passwd, pwd);
- else
- memcpy(passwd, pwd, 512);
- /* Calculate the MD4 hash (NT compatible) of the password */
- memset(nt_p16, '\0', 16);
- E_md4hash(passwd, nt_p16);
-
- /* Mangle the passwords into Lanman format */
- passwd[14] = '\0';
-/* strupper(passwd); */
-
- /* Calculate the SMB (lanman) hash functions of the password */
-
- memset(p16, '\0', 16);
- E_P16((unsigned char *) passwd, (unsigned char *) p16);
-
- /* clear out local copy of user's password (just being paranoid). */
- memset(passwd, '\0', sizeof(passwd));
-}
-#endif
-
-/* Does the NTLMv2 owfs of a user's password */
-#if 0 /* function not needed yet - but will be soon */
-static void
-ntv2_owf_gen(const unsigned char owf[16], const char *user_n,
- const char *domain_n, unsigned char kr_buf[16],
- const struct nls_table *nls_codepage)
-{
- wchar_t *user_u;
- wchar_t *dom_u;
- int user_l, domain_l;
- struct HMACMD5Context ctx;
-
- /* might as well do one alloc to hold both (user_u and dom_u) */
- user_u = kmalloc(2048 * sizeof(wchar_t), GFP_KERNEL);
- if (user_u == NULL)
- return;
- dom_u = user_u + 1024;
-
- /* push_ucs2(NULL, user_u, user_n, (user_l+1)*2,
- STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER);
- push_ucs2(NULL, dom_u, domain_n, (domain_l+1)*2,
- STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER); */
-
- /* BB user and domain may need to be uppercased */
- user_l = cifs_strtoUCS(user_u, user_n, 511, nls_codepage);
- domain_l = cifs_strtoUCS(dom_u, domain_n, 511, nls_codepage);
-
- user_l++; /* trailing null */
- domain_l++;
-
- hmac_md5_init_limK_to_64(owf, 16, &ctx);
- hmac_md5_update((const unsigned char *) user_u, user_l * 2, &ctx);
- hmac_md5_update((const unsigned char *) dom_u, domain_l * 2, &ctx);
- hmac_md5_final(kr_buf, &ctx);
-
- kfree(user_u);
-}
-#endif
-
-/* Does the des encryption from the FIRST 8 BYTES of the NT or LM MD4 hash. */
-#if 0 /* currently unused */
-static void
-NTLMSSPOWFencrypt(unsigned char passwd[8],
- unsigned char *ntlmchalresp, unsigned char p24[24])
-{
- unsigned char p21[21];
-
- memset(p21, '\0', 21);
- memcpy(p21, passwd, 8);
- memset(p21 + 8, 0xbd, 8);
-
- E_P24(p21, ntlmchalresp, p24);
-}
-#endif
-
/* Does the NT MD4 hash then des encryption. */
int
SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24)
@@ -369,39 +284,3 @@
rc = E_P24(p21, c8, p24);
return rc;
}
-
-
-/* Does the md5 encryption from the NT hash for NTLMv2. */
-/* These routines will be needed later */
-#if 0
-static void
-SMBOWFencrypt_ntv2(const unsigned char kr[16],
- const struct data_blob *srv_chal,
- const struct data_blob *cli_chal, unsigned char resp_buf[16])
-{
- struct HMACMD5Context ctx;
-
- hmac_md5_init_limK_to_64(kr, 16, &ctx);
- hmac_md5_update(srv_chal->data, srv_chal->length, &ctx);
- hmac_md5_update(cli_chal->data, cli_chal->length, &ctx);
- hmac_md5_final(resp_buf, &ctx);
-}
-
-static void
-SMBsesskeygen_ntv2(const unsigned char kr[16],
- const unsigned char *nt_resp, __u8 sess_key[16])
-{
- struct HMACMD5Context ctx;
-
- hmac_md5_init_limK_to_64(kr, 16, &ctx);
- hmac_md5_update(nt_resp, 16, &ctx);
- hmac_md5_final((unsigned char *) sess_key, &ctx);
-}
-
-static void
-SMBsesskeygen_ntv1(const unsigned char kr[16],
- const unsigned char *nt_resp, __u8 sess_key[16])
-{
- mdfour((unsigned char *) sess_key, (unsigned char *) kr, 16);
-}
-#endif
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 10ca6b2..0cc9584 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -26,6 +26,7 @@
#include <linux/wait.h>
#include <linux/net.h>
#include <linux/delay.h>
+#include <linux/freezer.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <linux/mempool.h>
@@ -324,7 +325,7 @@
{
int error;
- error = wait_event_killable(server->response_q,
+ error = wait_event_freezekillable(server->response_q,
midQ->midState != MID_REQUEST_SUBMITTED);
if (error < 0)
return -ERESTARTSYS;
@@ -339,8 +340,8 @@
*/
int
cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov,
- unsigned int nvec, mid_callback_t *callback, void *cbdata,
- bool ignore_pend)
+ unsigned int nvec, mid_receive_t *receive,
+ mid_callback_t *callback, void *cbdata, bool ignore_pend)
{
int rc;
struct mid_q_entry *mid;
@@ -374,6 +375,7 @@
goto out_err;
}
+ mid->receive = receive;
mid->callback = callback;
mid->callback_data = cbdata;
mid->midState = MID_REQUEST_SUBMITTED;
@@ -496,13 +498,18 @@
cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server,
bool log_error)
{
- dump_smb(mid->resp_buf,
- min_t(u32, 92, be32_to_cpu(mid->resp_buf->smb_buf_length)));
+ unsigned int len = be32_to_cpu(mid->resp_buf->smb_buf_length) + 4;
+
+ dump_smb(mid->resp_buf, min_t(u32, 92, len));
/* convert the length into a more usable form */
if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
+ struct kvec iov;
+
+ iov.iov_base = mid->resp_buf;
+ iov.iov_len = len;
/* FIXME: add code to kill session */
- if (cifs_verify_signature(mid->resp_buf, server,
+ if (cifs_verify_signature(&iov, 1, server,
mid->sequence_number + 1) != 0)
cERROR(1, "Unexpected SMB signature");
}
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index c323088..45f07c4 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -173,7 +173,7 @@
#ifdef CONFIG_CIFS_ACL
memcpy(pacl, ea_value, value_size);
rc = set_cifs_acl(pacl, value_size,
- direntry->d_inode, full_path);
+ direntry->d_inode, full_path, CIFS_ACL_DACL);
if (rc == 0) /* force revalidate of the inode */
CIFS_I(direntry->d_inode)->time = 0;
kfree(pacl);
diff --git a/fs/coda/coda_linux.c b/fs/coda/coda_linux.c
index 2bdbcc1..854ace7 100644
--- a/fs/coda/coda_linux.c
+++ b/fs/coda/coda_linux.c
@@ -104,7 +104,7 @@
if (attr->va_gid != -1)
inode->i_gid = (gid_t) attr->va_gid;
if (attr->va_nlink != -1)
- inode->i_nlink = attr->va_nlink;
+ set_nlink(inode, attr->va_nlink);
if (attr->va_size != -1)
inode->i_size = attr->va_size;
if (attr->va_size != -1)
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index 0239433..28e7e13 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -340,7 +340,7 @@
if (!error) {
/* VFS may delete the child */
if (de->d_inode)
- de->d_inode->i_nlink = 0;
+ clear_nlink(de->d_inode);
/* fix the link count of the parent */
coda_dir_drop_nlink(dir);
diff --git a/fs/compat.c b/fs/compat.c
index 05e3f3d..c987875 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -246,11 +246,8 @@
__put_user(kbuf->f_fsid.val[0], &ubuf->f_fsid.val[0]) ||
__put_user(kbuf->f_fsid.val[1], &ubuf->f_fsid.val[1]) ||
__put_user(kbuf->f_frsize, &ubuf->f_frsize) ||
- __put_user(0, &ubuf->f_spare[0]) ||
- __put_user(0, &ubuf->f_spare[1]) ||
- __put_user(0, &ubuf->f_spare[2]) ||
- __put_user(0, &ubuf->f_spare[3]) ||
- __put_user(0, &ubuf->f_spare[4]))
+ __put_user(kbuf->f_flags, &ubuf->f_flags) ||
+ __clear_user(ubuf->f_spare, sizeof(ubuf->f_spare)))
return -EFAULT;
return 0;
}
@@ -549,7 +546,7 @@
ssize_t compat_rw_copy_check_uvector(int type,
const struct compat_iovec __user *uvector, unsigned long nr_segs,
unsigned long fast_segs, struct iovec *fast_pointer,
- struct iovec **ret_pointer)
+ struct iovec **ret_pointer, int check_access)
{
compat_ssize_t tot_len;
struct iovec *iov = *ret_pointer = fast_pointer;
@@ -596,7 +593,8 @@
}
if (len < 0) /* size_t not fitting in compat_ssize_t .. */
goto out;
- if (!access_ok(vrfy_dir(type), compat_ptr(buf), len)) {
+ if (check_access &&
+ !access_ok(vrfy_dir(type), compat_ptr(buf), len)) {
ret = -EFAULT;
goto out;
}
@@ -1110,7 +1108,7 @@
goto out;
tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
- UIO_FASTIOV, iovstack, &iov);
+ UIO_FASTIOV, iovstack, &iov, 1);
if (tot_len == 0) {
ret = 0;
goto out;
diff --git a/fs/dcache.c b/fs/dcache.c
index a88948b..274f13e 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -225,7 +225,7 @@
}
/*
- * dentry_lru_(add|del|move_tail) must be called with d_lock held.
+ * dentry_lru_(add|del|prune|move_tail) must be called with d_lock held.
*/
static void dentry_lru_add(struct dentry *dentry)
{
@@ -245,6 +245,9 @@
dentry_stat.nr_unused--;
}
+/*
+ * Remove a dentry with references from the LRU.
+ */
static void dentry_lru_del(struct dentry *dentry)
{
if (!list_empty(&dentry->d_lru)) {
@@ -254,6 +257,23 @@
}
}
+/*
+ * Remove a dentry that is unreferenced and about to be pruned
+ * (unhashed and destroyed) from the LRU, and inform the file system.
+ * This wrapper should be called _prior_ to unhashing a victim dentry.
+ */
+static void dentry_lru_prune(struct dentry *dentry)
+{
+ if (!list_empty(&dentry->d_lru)) {
+ if (dentry->d_flags & DCACHE_OP_PRUNE)
+ dentry->d_op->d_prune(dentry);
+
+ spin_lock(&dcache_lru_lock);
+ __dentry_lru_del(dentry);
+ spin_unlock(&dcache_lru_lock);
+ }
+}
+
static void dentry_lru_move_tail(struct dentry *dentry)
{
spin_lock(&dcache_lru_lock);
@@ -403,8 +423,12 @@
if (ref)
dentry->d_count--;
- /* if dentry was on the d_lru list delete it from there */
- dentry_lru_del(dentry);
+ /*
+ * if dentry was on the d_lru list delete it from there.
+ * inform the fs via d_prune that this dentry is about to be
+ * unhashed and destroyed.
+ */
+ dentry_lru_prune(dentry);
/* if it was on the hash then remove it */
__d_drop(dentry);
return d_kill(dentry, parent);
@@ -854,8 +878,12 @@
do {
struct inode *inode;
- /* detach from the system */
- dentry_lru_del(dentry);
+ /*
+ * remove the dentry from the lru, and inform
+ * the fs that this dentry is about to be
+ * unhashed and destroyed.
+ */
+ dentry_lru_prune(dentry);
__d_shrink(dentry);
if (dentry->d_count != 0) {
@@ -1283,6 +1311,8 @@
dentry->d_flags |= DCACHE_OP_REVALIDATE;
if (op->d_delete)
dentry->d_flags |= DCACHE_OP_DELETE;
+ if (op->d_prune)
+ dentry->d_flags |= DCACHE_OP_PRUNE;
}
EXPORT_SYMBOL(d_set_d_op);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 2f27e57..d5d5297 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -307,7 +307,7 @@
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
s->s_root = d_alloc_root(inode);
if (s->s_root)
@@ -549,7 +549,7 @@
dentry = d_find_alias(inode);
- inode->i_nlink--;
+ drop_nlink(inode);
d_delete(dentry);
dput(dentry); /* d_alloc_name() in devpts_pty_new() */
dput(dentry); /* d_find_alias above */
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 44a360c..d740ab6 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -39,7 +39,7 @@
/*
* How many user pages to map in one call to get_user_pages(). This determines
- * the size of a structure on the stack.
+ * the size of a structure in the slab cache
*/
#define DIO_PAGES 64
@@ -55,13 +55,10 @@
* blocksize.
*/
-struct dio {
- /* BIO submission state */
+/* dio_state only used in the submission path */
+
+struct dio_submit {
struct bio *bio; /* bio under assembly */
- struct inode *inode;
- int rw;
- loff_t i_size; /* i_size when submitted */
- int flags; /* doesn't change */
unsigned blkbits; /* doesn't change */
unsigned blkfactor; /* When we're using an alignment which
is finer than the filesystem's soft
@@ -76,18 +73,17 @@
sector_t block_in_file; /* Current offset into the underlying
file in dio_block units. */
unsigned blocks_available; /* At block_in_file. changes */
+ int reap_counter; /* rate limit reaping */
sector_t final_block_in_request;/* doesn't change */
unsigned first_block_in_page; /* doesn't change, Used only once */
int boundary; /* prev block is at a boundary */
- int reap_counter; /* rate limit reaping */
get_block_t *get_block; /* block mapping function */
- dio_iodone_t *end_io; /* IO completion function */
dio_submit_t *submit_io; /* IO submition function */
+
loff_t logical_offset_in_bio; /* current first logical block in bio */
sector_t final_block_in_bio; /* current final block in bio + 1 */
sector_t next_block_for_io; /* next block to be put under IO,
in dio_blocks units */
- struct buffer_head map_bh; /* last get_block() result */
/*
* Deferred addition of a page to the dio. These variables are
@@ -100,18 +96,6 @@
sector_t cur_page_block; /* Where it starts */
loff_t cur_page_fs_offset; /* Offset in file */
- /* BIO completion state */
- spinlock_t bio_lock; /* protects BIO fields below */
- unsigned long refcount; /* direct_io_worker() and bios */
- struct bio *bio_list; /* singly linked via bi_private */
- struct task_struct *waiter; /* waiting task (NULL if none) */
-
- /* AIO related stuff */
- struct kiocb *iocb; /* kiocb */
- int is_async; /* is IO async ? */
- int io_error; /* IO error in completion path */
- ssize_t result; /* IO result */
-
/*
* Page fetching state. These variables belong to dio_refill_pages().
*/
@@ -125,7 +109,30 @@
*/
unsigned head; /* next page to process */
unsigned tail; /* last valid page + 1 */
+};
+
+/* dio_state communicated between submission path and end_io */
+struct dio {
+ int flags; /* doesn't change */
+ int rw;
+ struct inode *inode;
+ loff_t i_size; /* i_size when submitted */
+ dio_iodone_t *end_io; /* IO completion function */
+
+ void *private; /* copy from map_bh.b_private */
+
+ /* BIO completion state */
+ spinlock_t bio_lock; /* protects BIO fields below */
int page_errors; /* errno from get_user_pages() */
+ int is_async; /* is IO async ? */
+ int io_error; /* IO error in completion path */
+ unsigned long refcount; /* direct_io_worker() and bios */
+ struct bio *bio_list; /* singly linked via bi_private */
+ struct task_struct *waiter; /* waiting task (NULL if none) */
+
+ /* AIO related stuff */
+ struct kiocb *iocb; /* kiocb */
+ ssize_t result; /* IO result */
/*
* pages[] (and any fields placed after it) are not zeroed out at
@@ -133,7 +140,9 @@
* wish that they not be zeroed.
*/
struct page *pages[DIO_PAGES]; /* page buffer */
-};
+} ____cacheline_aligned_in_smp;
+
+static struct kmem_cache *dio_cache __read_mostly;
static void __inode_dio_wait(struct inode *inode)
{
@@ -182,27 +191,27 @@
/*
* How many pages are in the queue?
*/
-static inline unsigned dio_pages_present(struct dio *dio)
+static inline unsigned dio_pages_present(struct dio_submit *sdio)
{
- return dio->tail - dio->head;
+ return sdio->tail - sdio->head;
}
/*
* Go grab and pin some userspace pages. Typically we'll get 64 at a time.
*/
-static int dio_refill_pages(struct dio *dio)
+static inline int dio_refill_pages(struct dio *dio, struct dio_submit *sdio)
{
int ret;
int nr_pages;
- nr_pages = min(dio->total_pages - dio->curr_page, DIO_PAGES);
+ nr_pages = min(sdio->total_pages - sdio->curr_page, DIO_PAGES);
ret = get_user_pages_fast(
- dio->curr_user_address, /* Where from? */
+ sdio->curr_user_address, /* Where from? */
nr_pages, /* How many pages? */
dio->rw == READ, /* Write to memory? */
&dio->pages[0]); /* Put results here */
- if (ret < 0 && dio->blocks_available && (dio->rw & WRITE)) {
+ if (ret < 0 && sdio->blocks_available && (dio->rw & WRITE)) {
struct page *page = ZERO_PAGE(0);
/*
* A memory fault, but the filesystem has some outstanding
@@ -213,17 +222,17 @@
dio->page_errors = ret;
page_cache_get(page);
dio->pages[0] = page;
- dio->head = 0;
- dio->tail = 1;
+ sdio->head = 0;
+ sdio->tail = 1;
ret = 0;
goto out;
}
if (ret >= 0) {
- dio->curr_user_address += ret * PAGE_SIZE;
- dio->curr_page += ret;
- dio->head = 0;
- dio->tail = ret;
+ sdio->curr_user_address += ret * PAGE_SIZE;
+ sdio->curr_page += ret;
+ sdio->head = 0;
+ sdio->tail = ret;
ret = 0;
}
out:
@@ -236,17 +245,18 @@
* decent number of pages, less frequently. To provide nicer use of the
* L1 cache.
*/
-static struct page *dio_get_page(struct dio *dio)
+static inline struct page *dio_get_page(struct dio *dio,
+ struct dio_submit *sdio)
{
- if (dio_pages_present(dio) == 0) {
+ if (dio_pages_present(sdio) == 0) {
int ret;
- ret = dio_refill_pages(dio);
+ ret = dio_refill_pages(dio, sdio);
if (ret)
return ERR_PTR(ret);
- BUG_ON(dio_pages_present(dio) == 0);
+ BUG_ON(dio_pages_present(sdio) == 0);
}
- return dio->pages[dio->head++];
+ return dio->pages[sdio->head++];
}
/**
@@ -292,7 +302,7 @@
if (dio->end_io && dio->result) {
dio->end_io(dio->iocb, offset, transferred,
- dio->map_bh.b_private, ret, is_async);
+ dio->private, ret, is_async);
} else {
if (is_async)
aio_complete(dio->iocb, ret, 0);
@@ -323,7 +333,7 @@
if (remaining == 0) {
dio_complete(dio, dio->iocb->ki_pos, 0, true);
- kfree(dio);
+ kmem_cache_free(dio_cache, dio);
}
}
@@ -367,9 +377,10 @@
}
EXPORT_SYMBOL_GPL(dio_end_io);
-static void
-dio_bio_alloc(struct dio *dio, struct block_device *bdev,
- sector_t first_sector, int nr_vecs)
+static inline void
+dio_bio_alloc(struct dio *dio, struct dio_submit *sdio,
+ struct block_device *bdev,
+ sector_t first_sector, int nr_vecs)
{
struct bio *bio;
@@ -386,8 +397,8 @@
else
bio->bi_end_io = dio_bio_end_io;
- dio->bio = bio;
- dio->logical_offset_in_bio = dio->cur_page_fs_offset;
+ sdio->bio = bio;
+ sdio->logical_offset_in_bio = sdio->cur_page_fs_offset;
}
/*
@@ -397,9 +408,9 @@
*
* bios hold a dio reference between submit_bio and ->end_io.
*/
-static void dio_bio_submit(struct dio *dio)
+static inline void dio_bio_submit(struct dio *dio, struct dio_submit *sdio)
{
- struct bio *bio = dio->bio;
+ struct bio *bio = sdio->bio;
unsigned long flags;
bio->bi_private = dio;
@@ -411,24 +422,24 @@
if (dio->is_async && dio->rw == READ)
bio_set_pages_dirty(bio);
- if (dio->submit_io)
- dio->submit_io(dio->rw, bio, dio->inode,
- dio->logical_offset_in_bio);
+ if (sdio->submit_io)
+ sdio->submit_io(dio->rw, bio, dio->inode,
+ sdio->logical_offset_in_bio);
else
submit_bio(dio->rw, bio);
- dio->bio = NULL;
- dio->boundary = 0;
- dio->logical_offset_in_bio = 0;
+ sdio->bio = NULL;
+ sdio->boundary = 0;
+ sdio->logical_offset_in_bio = 0;
}
/*
* Release any resources in case of a failure
*/
-static void dio_cleanup(struct dio *dio)
+static inline void dio_cleanup(struct dio *dio, struct dio_submit *sdio)
{
- while (dio_pages_present(dio))
- page_cache_release(dio_get_page(dio));
+ while (dio_pages_present(sdio))
+ page_cache_release(dio_get_page(dio, sdio));
}
/*
@@ -518,11 +529,11 @@
*
* This also helps to limit the peak amount of pinned userspace memory.
*/
-static int dio_bio_reap(struct dio *dio)
+static inline int dio_bio_reap(struct dio *dio, struct dio_submit *sdio)
{
int ret = 0;
- if (dio->reap_counter++ >= 64) {
+ if (sdio->reap_counter++ >= 64) {
while (dio->bio_list) {
unsigned long flags;
struct bio *bio;
@@ -536,14 +547,14 @@
if (ret == 0)
ret = ret2;
}
- dio->reap_counter = 0;
+ sdio->reap_counter = 0;
}
return ret;
}
/*
* Call into the fs to map some more disk blocks. We record the current number
- * of available blocks at dio->blocks_available. These are in units of the
+ * of available blocks at sdio->blocks_available. These are in units of the
* fs blocksize, (1 << inode->i_blkbits).
*
* The fs is allowed to map lots of blocks at once. If it wants to do that,
@@ -564,10 +575,10 @@
* buffer_mapped(). However the direct-io code will only process holes one
* block at a time - it will repeatedly call get_block() as it walks the hole.
*/
-static int get_more_blocks(struct dio *dio)
+static int get_more_blocks(struct dio *dio, struct dio_submit *sdio,
+ struct buffer_head *map_bh)
{
int ret;
- struct buffer_head *map_bh = &dio->map_bh;
sector_t fs_startblk; /* Into file, in filesystem-sized blocks */
unsigned long fs_count; /* Number of filesystem-sized blocks */
unsigned long dio_count;/* Number of dio_block-sized blocks */
@@ -580,11 +591,11 @@
*/
ret = dio->page_errors;
if (ret == 0) {
- BUG_ON(dio->block_in_file >= dio->final_block_in_request);
- fs_startblk = dio->block_in_file >> dio->blkfactor;
- dio_count = dio->final_block_in_request - dio->block_in_file;
- fs_count = dio_count >> dio->blkfactor;
- blkmask = (1 << dio->blkfactor) - 1;
+ BUG_ON(sdio->block_in_file >= sdio->final_block_in_request);
+ fs_startblk = sdio->block_in_file >> sdio->blkfactor;
+ dio_count = sdio->final_block_in_request - sdio->block_in_file;
+ fs_count = dio_count >> sdio->blkfactor;
+ blkmask = (1 << sdio->blkfactor) - 1;
if (dio_count & blkmask)
fs_count++;
@@ -604,13 +615,16 @@
*/
create = dio->rw & WRITE;
if (dio->flags & DIO_SKIP_HOLES) {
- if (dio->block_in_file < (i_size_read(dio->inode) >>
- dio->blkbits))
+ if (sdio->block_in_file < (i_size_read(dio->inode) >>
+ sdio->blkbits))
create = 0;
}
- ret = (*dio->get_block)(dio->inode, fs_startblk,
+ ret = (*sdio->get_block)(dio->inode, fs_startblk,
map_bh, create);
+
+ /* Store for completion */
+ dio->private = map_bh->b_private;
}
return ret;
}
@@ -618,20 +632,21 @@
/*
* There is no bio. Make one now.
*/
-static int dio_new_bio(struct dio *dio, sector_t start_sector)
+static inline int dio_new_bio(struct dio *dio, struct dio_submit *sdio,
+ sector_t start_sector, struct buffer_head *map_bh)
{
sector_t sector;
int ret, nr_pages;
- ret = dio_bio_reap(dio);
+ ret = dio_bio_reap(dio, sdio);
if (ret)
goto out;
- sector = start_sector << (dio->blkbits - 9);
- nr_pages = min(dio->pages_in_io, bio_get_nr_vecs(dio->map_bh.b_bdev));
+ sector = start_sector << (sdio->blkbits - 9);
+ nr_pages = min(sdio->pages_in_io, bio_get_nr_vecs(map_bh->b_bdev));
nr_pages = min(nr_pages, BIO_MAX_PAGES);
BUG_ON(nr_pages <= 0);
- dio_bio_alloc(dio, dio->map_bh.b_bdev, sector, nr_pages);
- dio->boundary = 0;
+ dio_bio_alloc(dio, sdio, map_bh->b_bdev, sector, nr_pages);
+ sdio->boundary = 0;
out:
return ret;
}
@@ -643,21 +658,21 @@
*
* Return zero on success. Non-zero means the caller needs to start a new BIO.
*/
-static int dio_bio_add_page(struct dio *dio)
+static inline int dio_bio_add_page(struct dio_submit *sdio)
{
int ret;
- ret = bio_add_page(dio->bio, dio->cur_page,
- dio->cur_page_len, dio->cur_page_offset);
- if (ret == dio->cur_page_len) {
+ ret = bio_add_page(sdio->bio, sdio->cur_page,
+ sdio->cur_page_len, sdio->cur_page_offset);
+ if (ret == sdio->cur_page_len) {
/*
* Decrement count only, if we are done with this page
*/
- if ((dio->cur_page_len + dio->cur_page_offset) == PAGE_SIZE)
- dio->pages_in_io--;
- page_cache_get(dio->cur_page);
- dio->final_block_in_bio = dio->cur_page_block +
- (dio->cur_page_len >> dio->blkbits);
+ if ((sdio->cur_page_len + sdio->cur_page_offset) == PAGE_SIZE)
+ sdio->pages_in_io--;
+ page_cache_get(sdio->cur_page);
+ sdio->final_block_in_bio = sdio->cur_page_block +
+ (sdio->cur_page_len >> sdio->blkbits);
ret = 0;
} else {
ret = 1;
@@ -675,14 +690,15 @@
* The caller of this function is responsible for removing cur_page from the
* dio, and for dropping the refcount which came from that presence.
*/
-static int dio_send_cur_page(struct dio *dio)
+static inline int dio_send_cur_page(struct dio *dio, struct dio_submit *sdio,
+ struct buffer_head *map_bh)
{
int ret = 0;
- if (dio->bio) {
- loff_t cur_offset = dio->cur_page_fs_offset;
- loff_t bio_next_offset = dio->logical_offset_in_bio +
- dio->bio->bi_size;
+ if (sdio->bio) {
+ loff_t cur_offset = sdio->cur_page_fs_offset;
+ loff_t bio_next_offset = sdio->logical_offset_in_bio +
+ sdio->bio->bi_size;
/*
* See whether this new request is contiguous with the old.
@@ -698,28 +714,28 @@
* be the next logical offset in the bio, submit the bio we
* have.
*/
- if (dio->final_block_in_bio != dio->cur_page_block ||
+ if (sdio->final_block_in_bio != sdio->cur_page_block ||
cur_offset != bio_next_offset)
- dio_bio_submit(dio);
+ dio_bio_submit(dio, sdio);
/*
* Submit now if the underlying fs is about to perform a
* metadata read
*/
- else if (dio->boundary)
- dio_bio_submit(dio);
+ else if (sdio->boundary)
+ dio_bio_submit(dio, sdio);
}
- if (dio->bio == NULL) {
- ret = dio_new_bio(dio, dio->cur_page_block);
+ if (sdio->bio == NULL) {
+ ret = dio_new_bio(dio, sdio, sdio->cur_page_block, map_bh);
if (ret)
goto out;
}
- if (dio_bio_add_page(dio) != 0) {
- dio_bio_submit(dio);
- ret = dio_new_bio(dio, dio->cur_page_block);
+ if (dio_bio_add_page(sdio) != 0) {
+ dio_bio_submit(dio, sdio);
+ ret = dio_new_bio(dio, sdio, sdio->cur_page_block, map_bh);
if (ret == 0) {
- ret = dio_bio_add_page(dio);
+ ret = dio_bio_add_page(sdio);
BUG_ON(ret != 0);
}
}
@@ -744,9 +760,10 @@
* If that doesn't work out then we put the old page into the bio and add this
* page to the dio instead.
*/
-static int
-submit_page_section(struct dio *dio, struct page *page,
- unsigned offset, unsigned len, sector_t blocknr)
+static inline int
+submit_page_section(struct dio *dio, struct dio_submit *sdio, struct page *page,
+ unsigned offset, unsigned len, sector_t blocknr,
+ struct buffer_head *map_bh)
{
int ret = 0;
@@ -760,20 +777,20 @@
/*
* Can we just grow the current page's presence in the dio?
*/
- if ( (dio->cur_page == page) &&
- (dio->cur_page_offset + dio->cur_page_len == offset) &&
- (dio->cur_page_block +
- (dio->cur_page_len >> dio->blkbits) == blocknr)) {
- dio->cur_page_len += len;
+ if (sdio->cur_page == page &&
+ sdio->cur_page_offset + sdio->cur_page_len == offset &&
+ sdio->cur_page_block +
+ (sdio->cur_page_len >> sdio->blkbits) == blocknr) {
+ sdio->cur_page_len += len;
/*
- * If dio->boundary then we want to schedule the IO now to
+ * If sdio->boundary then we want to schedule the IO now to
* avoid metadata seeks.
*/
- if (dio->boundary) {
- ret = dio_send_cur_page(dio);
- page_cache_release(dio->cur_page);
- dio->cur_page = NULL;
+ if (sdio->boundary) {
+ ret = dio_send_cur_page(dio, sdio, map_bh);
+ page_cache_release(sdio->cur_page);
+ sdio->cur_page = NULL;
}
goto out;
}
@@ -781,20 +798,20 @@
/*
* If there's a deferred page already there then send it.
*/
- if (dio->cur_page) {
- ret = dio_send_cur_page(dio);
- page_cache_release(dio->cur_page);
- dio->cur_page = NULL;
+ if (sdio->cur_page) {
+ ret = dio_send_cur_page(dio, sdio, map_bh);
+ page_cache_release(sdio->cur_page);
+ sdio->cur_page = NULL;
if (ret)
goto out;
}
page_cache_get(page); /* It is in dio */
- dio->cur_page = page;
- dio->cur_page_offset = offset;
- dio->cur_page_len = len;
- dio->cur_page_block = blocknr;
- dio->cur_page_fs_offset = dio->block_in_file << dio->blkbits;
+ sdio->cur_page = page;
+ sdio->cur_page_offset = offset;
+ sdio->cur_page_len = len;
+ sdio->cur_page_block = blocknr;
+ sdio->cur_page_fs_offset = sdio->block_in_file << sdio->blkbits;
out:
return ret;
}
@@ -804,16 +821,16 @@
* file blocks. Only called for S_ISREG files - blockdevs do not set
* buffer_new
*/
-static void clean_blockdev_aliases(struct dio *dio)
+static void clean_blockdev_aliases(struct dio *dio, struct buffer_head *map_bh)
{
unsigned i;
unsigned nblocks;
- nblocks = dio->map_bh.b_size >> dio->inode->i_blkbits;
+ nblocks = map_bh->b_size >> dio->inode->i_blkbits;
for (i = 0; i < nblocks; i++) {
- unmap_underlying_metadata(dio->map_bh.b_bdev,
- dio->map_bh.b_blocknr + i);
+ unmap_underlying_metadata(map_bh->b_bdev,
+ map_bh->b_blocknr + i);
}
}
@@ -826,19 +843,20 @@
* `end' is zero if we're doing the start of the IO, 1 at the end of the
* IO.
*/
-static void dio_zero_block(struct dio *dio, int end)
+static inline void dio_zero_block(struct dio *dio, struct dio_submit *sdio,
+ int end, struct buffer_head *map_bh)
{
unsigned dio_blocks_per_fs_block;
unsigned this_chunk_blocks; /* In dio_blocks */
unsigned this_chunk_bytes;
struct page *page;
- dio->start_zero_done = 1;
- if (!dio->blkfactor || !buffer_new(&dio->map_bh))
+ sdio->start_zero_done = 1;
+ if (!sdio->blkfactor || !buffer_new(map_bh))
return;
- dio_blocks_per_fs_block = 1 << dio->blkfactor;
- this_chunk_blocks = dio->block_in_file & (dio_blocks_per_fs_block - 1);
+ dio_blocks_per_fs_block = 1 << sdio->blkfactor;
+ this_chunk_blocks = sdio->block_in_file & (dio_blocks_per_fs_block - 1);
if (!this_chunk_blocks)
return;
@@ -850,14 +868,14 @@
if (end)
this_chunk_blocks = dio_blocks_per_fs_block - this_chunk_blocks;
- this_chunk_bytes = this_chunk_blocks << dio->blkbits;
+ this_chunk_bytes = this_chunk_blocks << sdio->blkbits;
page = ZERO_PAGE(0);
- if (submit_page_section(dio, page, 0, this_chunk_bytes,
- dio->next_block_for_io))
+ if (submit_page_section(dio, sdio, page, 0, this_chunk_bytes,
+ sdio->next_block_for_io, map_bh))
return;
- dio->next_block_for_io += this_chunk_blocks;
+ sdio->next_block_for_io += this_chunk_blocks;
}
/*
@@ -876,20 +894,20 @@
* it should set b_size to PAGE_SIZE or more inside get_block(). This gives
* fine alignment but still allows this function to work in PAGE_SIZE units.
*/
-static int do_direct_IO(struct dio *dio)
+static int do_direct_IO(struct dio *dio, struct dio_submit *sdio,
+ struct buffer_head *map_bh)
{
- const unsigned blkbits = dio->blkbits;
+ const unsigned blkbits = sdio->blkbits;
const unsigned blocks_per_page = PAGE_SIZE >> blkbits;
struct page *page;
unsigned block_in_page;
- struct buffer_head *map_bh = &dio->map_bh;
int ret = 0;
/* The I/O can start at any block offset within the first page */
- block_in_page = dio->first_block_in_page;
+ block_in_page = sdio->first_block_in_page;
- while (dio->block_in_file < dio->final_block_in_request) {
- page = dio_get_page(dio);
+ while (sdio->block_in_file < sdio->final_block_in_request) {
+ page = dio_get_page(dio, sdio);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
@@ -901,14 +919,14 @@
unsigned this_chunk_blocks; /* # of blocks */
unsigned u;
- if (dio->blocks_available == 0) {
+ if (sdio->blocks_available == 0) {
/*
* Need to go and map some more disk
*/
unsigned long blkmask;
unsigned long dio_remainder;
- ret = get_more_blocks(dio);
+ ret = get_more_blocks(dio, sdio, map_bh);
if (ret) {
page_cache_release(page);
goto out;
@@ -916,18 +934,18 @@
if (!buffer_mapped(map_bh))
goto do_holes;
- dio->blocks_available =
- map_bh->b_size >> dio->blkbits;
- dio->next_block_for_io =
- map_bh->b_blocknr << dio->blkfactor;
+ sdio->blocks_available =
+ map_bh->b_size >> sdio->blkbits;
+ sdio->next_block_for_io =
+ map_bh->b_blocknr << sdio->blkfactor;
if (buffer_new(map_bh))
- clean_blockdev_aliases(dio);
+ clean_blockdev_aliases(dio, map_bh);
- if (!dio->blkfactor)
+ if (!sdio->blkfactor)
goto do_holes;
- blkmask = (1 << dio->blkfactor) - 1;
- dio_remainder = (dio->block_in_file & blkmask);
+ blkmask = (1 << sdio->blkfactor) - 1;
+ dio_remainder = (sdio->block_in_file & blkmask);
/*
* If we are at the start of IO and that IO
@@ -941,8 +959,8 @@
* on-disk
*/
if (!buffer_new(map_bh))
- dio->next_block_for_io += dio_remainder;
- dio->blocks_available -= dio_remainder;
+ sdio->next_block_for_io += dio_remainder;
+ sdio->blocks_available -= dio_remainder;
}
do_holes:
/* Handle holes */
@@ -961,7 +979,7 @@
*/
i_size_aligned = ALIGN(i_size_read(dio->inode),
1 << blkbits);
- if (dio->block_in_file >=
+ if (sdio->block_in_file >=
i_size_aligned >> blkbits) {
/* We hit eof */
page_cache_release(page);
@@ -969,7 +987,7 @@
}
zero_user(page, block_in_page << blkbits,
1 << blkbits);
- dio->block_in_file++;
+ sdio->block_in_file++;
block_in_page++;
goto next_block;
}
@@ -979,38 +997,41 @@
* is finer than the underlying fs, go check to see if
* we must zero out the start of this block.
*/
- if (unlikely(dio->blkfactor && !dio->start_zero_done))
- dio_zero_block(dio, 0);
+ if (unlikely(sdio->blkfactor && !sdio->start_zero_done))
+ dio_zero_block(dio, sdio, 0, map_bh);
/*
* Work out, in this_chunk_blocks, how much disk we
* can add to this page
*/
- this_chunk_blocks = dio->blocks_available;
+ this_chunk_blocks = sdio->blocks_available;
u = (PAGE_SIZE - offset_in_page) >> blkbits;
if (this_chunk_blocks > u)
this_chunk_blocks = u;
- u = dio->final_block_in_request - dio->block_in_file;
+ u = sdio->final_block_in_request - sdio->block_in_file;
if (this_chunk_blocks > u)
this_chunk_blocks = u;
this_chunk_bytes = this_chunk_blocks << blkbits;
BUG_ON(this_chunk_bytes == 0);
- dio->boundary = buffer_boundary(map_bh);
- ret = submit_page_section(dio, page, offset_in_page,
- this_chunk_bytes, dio->next_block_for_io);
+ sdio->boundary = buffer_boundary(map_bh);
+ ret = submit_page_section(dio, sdio, page,
+ offset_in_page,
+ this_chunk_bytes,
+ sdio->next_block_for_io,
+ map_bh);
if (ret) {
page_cache_release(page);
goto out;
}
- dio->next_block_for_io += this_chunk_blocks;
+ sdio->next_block_for_io += this_chunk_blocks;
- dio->block_in_file += this_chunk_blocks;
+ sdio->block_in_file += this_chunk_blocks;
block_in_page += this_chunk_blocks;
- dio->blocks_available -= this_chunk_blocks;
+ sdio->blocks_available -= this_chunk_blocks;
next_block:
- BUG_ON(dio->block_in_file > dio->final_block_in_request);
- if (dio->block_in_file == dio->final_block_in_request)
+ BUG_ON(sdio->block_in_file > sdio->final_block_in_request);
+ if (sdio->block_in_file == sdio->final_block_in_request)
break;
}
@@ -1022,135 +1043,10 @@
return ret;
}
-static ssize_t
-direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
- const struct iovec *iov, loff_t offset, unsigned long nr_segs,
- unsigned blkbits, get_block_t get_block, dio_iodone_t end_io,
- dio_submit_t submit_io, struct dio *dio)
+static inline int drop_refcount(struct dio *dio)
{
- unsigned long user_addr;
+ int ret2;
unsigned long flags;
- int seg;
- ssize_t ret = 0;
- ssize_t ret2;
- size_t bytes;
-
- dio->inode = inode;
- dio->rw = rw;
- dio->blkbits = blkbits;
- dio->blkfactor = inode->i_blkbits - blkbits;
- dio->block_in_file = offset >> blkbits;
-
- dio->get_block = get_block;
- dio->end_io = end_io;
- dio->submit_io = submit_io;
- dio->final_block_in_bio = -1;
- dio->next_block_for_io = -1;
-
- dio->iocb = iocb;
- dio->i_size = i_size_read(inode);
-
- spin_lock_init(&dio->bio_lock);
- dio->refcount = 1;
-
- /*
- * In case of non-aligned buffers, we may need 2 more
- * pages since we need to zero out first and last block.
- */
- if (unlikely(dio->blkfactor))
- dio->pages_in_io = 2;
-
- for (seg = 0; seg < nr_segs; seg++) {
- user_addr = (unsigned long)iov[seg].iov_base;
- dio->pages_in_io +=
- ((user_addr+iov[seg].iov_len +PAGE_SIZE-1)/PAGE_SIZE
- - user_addr/PAGE_SIZE);
- }
-
- for (seg = 0; seg < nr_segs; seg++) {
- user_addr = (unsigned long)iov[seg].iov_base;
- dio->size += bytes = iov[seg].iov_len;
-
- /* Index into the first page of the first block */
- dio->first_block_in_page = (user_addr & ~PAGE_MASK) >> blkbits;
- dio->final_block_in_request = dio->block_in_file +
- (bytes >> blkbits);
- /* Page fetching state */
- dio->head = 0;
- dio->tail = 0;
- dio->curr_page = 0;
-
- dio->total_pages = 0;
- if (user_addr & (PAGE_SIZE-1)) {
- dio->total_pages++;
- bytes -= PAGE_SIZE - (user_addr & (PAGE_SIZE - 1));
- }
- dio->total_pages += (bytes + PAGE_SIZE - 1) / PAGE_SIZE;
- dio->curr_user_address = user_addr;
-
- ret = do_direct_IO(dio);
-
- dio->result += iov[seg].iov_len -
- ((dio->final_block_in_request - dio->block_in_file) <<
- blkbits);
-
- if (ret) {
- dio_cleanup(dio);
- break;
- }
- } /* end iovec loop */
-
- if (ret == -ENOTBLK) {
- /*
- * The remaining part of the request will be
- * be handled by buffered I/O when we return
- */
- ret = 0;
- }
- /*
- * There may be some unwritten disk at the end of a part-written
- * fs-block-sized block. Go zero that now.
- */
- dio_zero_block(dio, 1);
-
- if (dio->cur_page) {
- ret2 = dio_send_cur_page(dio);
- if (ret == 0)
- ret = ret2;
- page_cache_release(dio->cur_page);
- dio->cur_page = NULL;
- }
- if (dio->bio)
- dio_bio_submit(dio);
-
- /*
- * It is possible that, we return short IO due to end of file.
- * In that case, we need to release all the pages we got hold on.
- */
- dio_cleanup(dio);
-
- /*
- * All block lookups have been performed. For READ requests
- * we can let i_mutex go now that its achieved its purpose
- * of protecting us from looking up uninitialized blocks.
- */
- if (rw == READ && (dio->flags & DIO_LOCKING))
- mutex_unlock(&dio->inode->i_mutex);
-
- /*
- * The only time we want to leave bios in flight is when a successful
- * partial aio read or full aio write have been setup. In that case
- * bio completion will call aio_complete. The only time it's safe to
- * call aio_complete is when we return -EIOCBQUEUED, so we key on that.
- * This had *better* be the only place that raises -EIOCBQUEUED.
- */
- BUG_ON(ret == -EIOCBQUEUED);
- if (dio->is_async && ret == 0 && dio->result &&
- ((rw & READ) || (dio->result == dio->size)))
- ret = -EIOCBQUEUED;
-
- if (ret != -EIOCBQUEUED)
- dio_await_completion(dio);
/*
* Sync will always be dropping the final ref and completing the
@@ -1166,14 +1062,7 @@
spin_lock_irqsave(&dio->bio_lock, flags);
ret2 = --dio->refcount;
spin_unlock_irqrestore(&dio->bio_lock, flags);
-
- if (ret2 == 0) {
- ret = dio_complete(dio, offset, ret, false);
- kfree(dio);
- } else
- BUG_ON(ret != -EIOCBQUEUED);
-
- return ret;
+ return ret2;
}
/*
@@ -1195,6 +1084,11 @@
* expected that filesystem provide exclusion between new direct I/O
* and truncates. For DIO_LOCKING filesystems this is done by i_mutex,
* but other filesystems need to take care of this on their own.
+ *
+ * NOTE: if you pass "sdio" to anything by pointer make sure that function
+ * is always inlined. Otherwise gcc is unable to split the structure into
+ * individual fields and will generate much worse code. This is important
+ * for the whole file.
*/
ssize_t
__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
@@ -1211,6 +1105,10 @@
ssize_t retval = -EINVAL;
loff_t end = offset;
struct dio *dio;
+ struct dio_submit sdio = { 0, };
+ unsigned long user_addr;
+ size_t bytes;
+ struct buffer_head map_bh = { 0, };
if (rw & WRITE)
rw = WRITE_ODIRECT;
@@ -1244,7 +1142,7 @@
if (rw == READ && end == offset)
return 0;
- dio = kmalloc(sizeof(*dio), GFP_KERNEL);
+ dio = kmem_cache_alloc(dio_cache, GFP_KERNEL);
retval = -ENOMEM;
if (!dio)
goto out;
@@ -1268,7 +1166,7 @@
end - 1);
if (retval) {
mutex_unlock(&inode->i_mutex);
- kfree(dio);
+ kmem_cache_free(dio_cache, dio);
goto out;
}
}
@@ -1288,11 +1186,141 @@
dio->is_async = !is_sync_kiocb(iocb) && !((rw & WRITE) &&
(end > i_size_read(inode)));
- retval = direct_io_worker(rw, iocb, inode, iov, offset,
- nr_segs, blkbits, get_block, end_io,
- submit_io, dio);
+ retval = 0;
+
+ dio->inode = inode;
+ dio->rw = rw;
+ sdio.blkbits = blkbits;
+ sdio.blkfactor = inode->i_blkbits - blkbits;
+ sdio.block_in_file = offset >> blkbits;
+
+ sdio.get_block = get_block;
+ dio->end_io = end_io;
+ sdio.submit_io = submit_io;
+ sdio.final_block_in_bio = -1;
+ sdio.next_block_for_io = -1;
+
+ dio->iocb = iocb;
+ dio->i_size = i_size_read(inode);
+
+ spin_lock_init(&dio->bio_lock);
+ dio->refcount = 1;
+
+ /*
+ * In case of non-aligned buffers, we may need 2 more
+ * pages since we need to zero out first and last block.
+ */
+ if (unlikely(sdio.blkfactor))
+ sdio.pages_in_io = 2;
+
+ for (seg = 0; seg < nr_segs; seg++) {
+ user_addr = (unsigned long)iov[seg].iov_base;
+ sdio.pages_in_io +=
+ ((user_addr + iov[seg].iov_len + PAGE_SIZE-1) /
+ PAGE_SIZE - user_addr / PAGE_SIZE);
+ }
+
+ for (seg = 0; seg < nr_segs; seg++) {
+ user_addr = (unsigned long)iov[seg].iov_base;
+ sdio.size += bytes = iov[seg].iov_len;
+
+ /* Index into the first page of the first block */
+ sdio.first_block_in_page = (user_addr & ~PAGE_MASK) >> blkbits;
+ sdio.final_block_in_request = sdio.block_in_file +
+ (bytes >> blkbits);
+ /* Page fetching state */
+ sdio.head = 0;
+ sdio.tail = 0;
+ sdio.curr_page = 0;
+
+ sdio.total_pages = 0;
+ if (user_addr & (PAGE_SIZE-1)) {
+ sdio.total_pages++;
+ bytes -= PAGE_SIZE - (user_addr & (PAGE_SIZE - 1));
+ }
+ sdio.total_pages += (bytes + PAGE_SIZE - 1) / PAGE_SIZE;
+ sdio.curr_user_address = user_addr;
+
+ retval = do_direct_IO(dio, &sdio, &map_bh);
+
+ dio->result += iov[seg].iov_len -
+ ((sdio.final_block_in_request - sdio.block_in_file) <<
+ blkbits);
+
+ if (retval) {
+ dio_cleanup(dio, &sdio);
+ break;
+ }
+ } /* end iovec loop */
+
+ if (retval == -ENOTBLK) {
+ /*
+ * The remaining part of the request will be
+ * be handled by buffered I/O when we return
+ */
+ retval = 0;
+ }
+ /*
+ * There may be some unwritten disk at the end of a part-written
+ * fs-block-sized block. Go zero that now.
+ */
+ dio_zero_block(dio, &sdio, 1, &map_bh);
+
+ if (sdio.cur_page) {
+ ssize_t ret2;
+
+ ret2 = dio_send_cur_page(dio, &sdio, &map_bh);
+ if (retval == 0)
+ retval = ret2;
+ page_cache_release(sdio.cur_page);
+ sdio.cur_page = NULL;
+ }
+ if (sdio.bio)
+ dio_bio_submit(dio, &sdio);
+
+ /*
+ * It is possible that, we return short IO due to end of file.
+ * In that case, we need to release all the pages we got hold on.
+ */
+ dio_cleanup(dio, &sdio);
+
+ /*
+ * All block lookups have been performed. For READ requests
+ * we can let i_mutex go now that its achieved its purpose
+ * of protecting us from looking up uninitialized blocks.
+ */
+ if (rw == READ && (dio->flags & DIO_LOCKING))
+ mutex_unlock(&dio->inode->i_mutex);
+
+ /*
+ * The only time we want to leave bios in flight is when a successful
+ * partial aio read or full aio write have been setup. In that case
+ * bio completion will call aio_complete. The only time it's safe to
+ * call aio_complete is when we return -EIOCBQUEUED, so we key on that.
+ * This had *better* be the only place that raises -EIOCBQUEUED.
+ */
+ BUG_ON(retval == -EIOCBQUEUED);
+ if (dio->is_async && retval == 0 && dio->result &&
+ ((rw & READ) || (dio->result == sdio.size)))
+ retval = -EIOCBQUEUED;
+
+ if (retval != -EIOCBQUEUED)
+ dio_await_completion(dio);
+
+ if (drop_refcount(dio) == 0) {
+ retval = dio_complete(dio, offset, retval, false);
+ kmem_cache_free(dio_cache, dio);
+ } else
+ BUG_ON(retval != -EIOCBQUEUED);
out:
return retval;
}
EXPORT_SYMBOL(__blockdev_direct_IO);
+
+static __init int dio_init(void)
+{
+ dio_cache = KMEM_CACHE(dio, SLAB_PANIC);
+ return 0;
+}
+module_init(dio_init)
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index b36c557..54481a3 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -514,7 +514,7 @@
#define ecryptfs_printk(type, fmt, arg...) \
__ecryptfs_printk(type "%s: " fmt, __func__, ## arg);
-__attribute__ ((format(printf, 1, 2)))
+__printf(1, 2)
void __ecryptfs_printk(const char *fmt, ...);
extern const struct file_operations ecryptfs_main_fops;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 11f8582..a36d327 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -474,8 +474,8 @@
goto out_lock;
fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
- old_dentry->d_inode->i_nlink =
- ecryptfs_inode_to_lower(old_dentry->d_inode)->i_nlink;
+ set_nlink(old_dentry->d_inode,
+ ecryptfs_inode_to_lower(old_dentry->d_inode)->i_nlink);
i_size_write(new_dentry->d_inode, file_size_save);
out_lock:
unlock_dir(lower_dir_dentry);
@@ -499,8 +499,8 @@
goto out_unlock;
}
fsstack_copy_attr_times(dir, lower_dir_inode);
- dentry->d_inode->i_nlink =
- ecryptfs_inode_to_lower(dentry->d_inode)->i_nlink;
+ set_nlink(dentry->d_inode,
+ ecryptfs_inode_to_lower(dentry->d_inode)->i_nlink);
dentry->d_inode->i_ctime = dir->i_ctime;
d_drop(dentry);
out_unlock:
@@ -565,7 +565,7 @@
goto out;
fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
- dir->i_nlink = lower_dir_dentry->d_inode->i_nlink;
+ set_nlink(dir, lower_dir_dentry->d_inode->i_nlink);
out:
unlock_dir(lower_dir_dentry);
if (!dentry->d_inode)
@@ -588,7 +588,7 @@
if (!rc && dentry->d_inode)
clear_nlink(dentry->d_inode);
fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
- dir->i_nlink = lower_dir_dentry->d_inode->i_nlink;
+ set_nlink(dir, lower_dir_dentry->d_inode->i_nlink);
unlock_dir(lower_dir_dentry);
if (!rc)
d_drop(dentry);
diff --git a/fs/efs/inode.c b/fs/efs/inode.c
index 9c13412..bc84f36 100644
--- a/fs/efs/inode.c
+++ b/fs/efs/inode.c
@@ -96,7 +96,7 @@
efs_inode = (struct efs_dinode *) (bh->b_data + offset);
inode->i_mode = be16_to_cpu(efs_inode->di_mode);
- inode->i_nlink = be16_to_cpu(efs_inode->di_nlink);
+ set_nlink(inode, be16_to_cpu(efs_inode->di_nlink));
inode->i_uid = (uid_t)be16_to_cpu(efs_inode->di_uid);
inode->i_gid = (gid_t)be16_to_cpu(efs_inode->di_gid);
inode->i_size = be32_to_cpu(efs_inode->di_size);
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 9026fc9..828e750 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -70,6 +70,15 @@
* simultaneous inserts (A into B and B into A) from racing and
* constructing a cycle without either insert observing that it is
* going to.
+ * It is necessary to acquire multiple "ep->mtx"es at once in the
+ * case when one epoll fd is added to another. In this case, we
+ * always acquire the locks in the order of nesting (i.e. after
+ * epoll_ctl(e1, EPOLL_CTL_ADD, e2), e1->mtx will always be acquired
+ * before e2->mtx). Since we disallow cycles of epoll file
+ * descriptors, this ensures that the mutexes are well-ordered. In
+ * order to communicate this nesting to lockdep, when walking a tree
+ * of epoll file descriptors, we use the current recursion depth as
+ * the lockdep subkey.
* It is possible to drop the "ep->mtx" and to use the global
* mutex "epmutex" (together with "ep->lock") to have it working,
* but having "ep->mtx" will make the interface more scalable.
@@ -464,13 +473,15 @@
* @ep: Pointer to the epoll private data structure.
* @sproc: Pointer to the scan callback.
* @priv: Private opaque data passed to the @sproc callback.
+ * @depth: The current depth of recursive f_op->poll calls.
*
* Returns: The same integer error code returned by the @sproc callback.
*/
static int ep_scan_ready_list(struct eventpoll *ep,
int (*sproc)(struct eventpoll *,
struct list_head *, void *),
- void *priv)
+ void *priv,
+ int depth)
{
int error, pwake = 0;
unsigned long flags;
@@ -481,7 +492,7 @@
* We need to lock this because we could be hit by
* eventpoll_release_file() and epoll_ctl().
*/
- mutex_lock(&ep->mtx);
+ mutex_lock_nested(&ep->mtx, depth);
/*
* Steal the ready list, and re-init the original one to the
@@ -670,7 +681,7 @@
static int ep_poll_readyevents_proc(void *priv, void *cookie, int call_nests)
{
- return ep_scan_ready_list(priv, ep_read_events_proc, NULL);
+ return ep_scan_ready_list(priv, ep_read_events_proc, NULL, call_nests + 1);
}
static unsigned int ep_eventpoll_poll(struct file *file, poll_table *wait)
@@ -737,7 +748,7 @@
ep = epi->ep;
list_del_init(&epi->fllink);
- mutex_lock(&ep->mtx);
+ mutex_lock_nested(&ep->mtx, 0);
ep_remove(ep, epi);
mutex_unlock(&ep->mtx);
}
@@ -1134,7 +1145,7 @@
esed.maxevents = maxevents;
esed.events = events;
- return ep_scan_ready_list(ep, ep_send_events_proc, &esed);
+ return ep_scan_ready_list(ep, ep_send_events_proc, &esed, 0);
}
static inline struct timespec ep_set_mstimeout(long ms)
@@ -1267,7 +1278,7 @@
struct rb_node *rbp;
struct epitem *epi;
- mutex_lock(&ep->mtx);
+ mutex_lock_nested(&ep->mtx, call_nests + 1);
for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
epi = rb_entry(rbp, struct epitem, rbn);
if (unlikely(is_file_epoll(epi->ffd.file))) {
@@ -1409,7 +1420,7 @@
}
- mutex_lock(&ep->mtx);
+ mutex_lock_nested(&ep->mtx, 0);
/*
* Try to lookup the file inside our RB tree, Since we grabbed "mtx"
diff --git a/fs/exec.c b/fs/exec.c
index 25dcbe5..3625464 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -841,10 +841,6 @@
tsk->mm = mm;
tsk->active_mm = mm;
activate_mm(active_mm, mm);
- if (old_mm && tsk->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
- atomic_dec(&old_mm->oom_disable_count);
- atomic_inc(&tsk->mm->oom_disable_count);
- }
task_unlock(tsk);
arch_pick_mmap_layout(mm);
if (old_mm) {
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 3e5f3a6..f6dbf77 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -1165,7 +1165,7 @@
inode->i_mode = le16_to_cpu(fcb.i_mode);
inode->i_uid = le32_to_cpu(fcb.i_uid);
inode->i_gid = le32_to_cpu(fcb.i_gid);
- inode->i_nlink = le16_to_cpu(fcb.i_links_count);
+ set_nlink(inode, le16_to_cpu(fcb.i_links_count));
inode->i_ctime.tv_sec = (signed)le32_to_cpu(fcb.i_ctime);
inode->i_atime.tv_sec = (signed)le32_to_cpu(fcb.i_atime);
inode->i_mtime.tv_sec = (signed)le32_to_cpu(fcb.i_mtime);
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index 8f44cef..a8cbe1b 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -421,7 +421,7 @@
void ext2_init_block_alloc_info(struct inode *inode)
{
struct ext2_inode_info *ei = EXT2_I(inode);
- struct ext2_block_alloc_info *block_i = ei->i_block_alloc_info;
+ struct ext2_block_alloc_info *block_i;
struct super_block *sb = inode->i_sb;
block_i = kmalloc(sizeof(*block_i), GFP_NOFS);
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index af9fc89..9a4e5e20 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -135,10 +135,10 @@
struct dentry *ext2_get_parent(struct dentry *child);
/* super.c */
-extern void ext2_error (struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern void ext2_msg(struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void ext2_error(struct super_block *, const char *, const char *, ...);
+extern __printf(3, 4)
+void ext2_msg(struct super_block *, const char *, const char *, ...);
extern void ext2_update_dynamic_rev (struct super_block *sb);
extern void ext2_write_super (struct super_block *);
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index ee9ed31..c4e81df 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -601,7 +601,7 @@
fail_drop:
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
return ERR_PTR(err);
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index a8a58f6..91a6945 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1321,7 +1321,7 @@
inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16;
inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16;
}
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
inode->i_size = le32_to_cpu(raw_inode->i_size);
inode->i_atime.tv_sec = (signed)le32_to_cpu(raw_inode->i_atime);
inode->i_ctime.tv_sec = (signed)le32_to_cpu(raw_inode->i_ctime);
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 1dd62ed..bd8ac16 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -327,10 +327,10 @@
if (ino > le32_to_cpu(EXT2_SB(sb)->s_es->s_inodes_count))
return ERR_PTR(-ESTALE);
- /* iget isn't really right if the inode is currently unallocated!!
- * ext2_read_inode currently does appropriate checks, but
- * it might be "neater" to call ext2_get_inode first and check
- * if the inode is valid.....
+ /*
+ * ext2_iget isn't quite right if the inode is currently unallocated!
+ * However ext2_iget currently does appropriate checks to handle stale
+ * inodes so everything is OK.
*/
inode = ext2_iget(sb, ino);
if (IS_ERR(inode))
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 6386d76..a203892 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -427,7 +427,7 @@
void ext3_init_block_alloc_info(struct inode *inode)
{
struct ext3_inode_info *ei = EXT3_I(inode);
- struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info;
+ struct ext3_block_alloc_info *block_i;
struct super_block *sb = inode->i_sb;
block_i = kmalloc(sizeof(*block_i), GFP_NOFS);
@@ -1440,14 +1440,14 @@
*
* Check if filesystem has at least 1 free block available for allocation.
*/
-static int ext3_has_free_blocks(struct ext3_sb_info *sbi)
+static int ext3_has_free_blocks(struct ext3_sb_info *sbi, int use_reservation)
{
ext3_fsblk_t free_blocks, root_blocks;
free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
root_blocks = le32_to_cpu(sbi->s_es->s_r_blocks_count);
if (free_blocks < root_blocks + 1 && !capable(CAP_SYS_RESOURCE) &&
- sbi->s_resuid != current_fsuid() &&
+ !use_reservation && sbi->s_resuid != current_fsuid() &&
(sbi->s_resgid == 0 || !in_group_p (sbi->s_resgid))) {
return 0;
}
@@ -1468,7 +1468,7 @@
*/
int ext3_should_retry_alloc(struct super_block *sb, int *retries)
{
- if (!ext3_has_free_blocks(EXT3_SB(sb)) || (*retries)++ > 3)
+ if (!ext3_has_free_blocks(EXT3_SB(sb), 0) || (*retries)++ > 3)
return 0;
jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
@@ -1546,7 +1546,7 @@
if (block_i && ((windowsz = block_i->rsv_window_node.rsv_goal_size) > 0))
my_rsv = &block_i->rsv_window_node;
- if (!ext3_has_free_blocks(sbi)) {
+ if (!ext3_has_free_blocks(sbi, IS_NOQUOTA(inode))) {
*errp = -ENOSPC;
goto out;
}
@@ -1924,9 +1924,10 @@
* reaches any used block. Then issue a TRIM command on this extent and free
* the extent in the block bitmap. This is done until whole group is scanned.
*/
-ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, unsigned int group,
- ext3_grpblk_t start, ext3_grpblk_t max,
- ext3_grpblk_t minblocks)
+static ext3_grpblk_t ext3_trim_all_free(struct super_block *sb,
+ unsigned int group,
+ ext3_grpblk_t start, ext3_grpblk_t max,
+ ext3_grpblk_t minblocks)
{
handle_t *handle;
ext3_grpblk_t next, free_blocks, bit, freed, count = 0;
diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c
index d494c55..1860ed3 100644
--- a/fs/ext3/fsync.c
+++ b/fs/ext3/fsync.c
@@ -61,13 +61,6 @@
if (ret)
goto out;
- /*
- * Taking the mutex here just to keep consistent with how fsync was
- * called previously, however it looks like we don't need to take
- * i_mutex at all.
- */
- mutex_lock(&inode->i_mutex);
-
J_ASSERT(ext3_journal_current_handle() == NULL);
/*
@@ -85,7 +78,6 @@
* safe in-journal, which is all fsync() needs to ensure.
*/
if (ext3_should_journal_data(inode)) {
- mutex_unlock(&inode->i_mutex);
ret = ext3_force_commit(inode->i_sb);
goto out;
}
@@ -108,8 +100,6 @@
*/
if (needs_barrier)
blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
-
- mutex_unlock(&inode->i_mutex);
out:
trace_ext3_sync_file_exit(inode, ret);
return ret;
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index bf09cbf..5c866e0 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -178,42 +178,6 @@
}
/*
- * There are two policies for allocating an inode. If the new inode is
- * a directory, then a forward search is made for a block group with both
- * free space and a low directory-to-inode ratio; if that fails, then of
- * the groups with above-average free space, that group with the fewest
- * directories already is chosen.
- *
- * For other inodes, search forward from the parent directory\'s block
- * group to find a free inode.
- */
-static int find_group_dir(struct super_block *sb, struct inode *parent)
-{
- int ngroups = EXT3_SB(sb)->s_groups_count;
- unsigned int freei, avefreei;
- struct ext3_group_desc *desc, *best_desc = NULL;
- int group, best_group = -1;
-
- freei = percpu_counter_read_positive(&EXT3_SB(sb)->s_freeinodes_counter);
- avefreei = freei / ngroups;
-
- for (group = 0; group < ngroups; group++) {
- desc = ext3_get_group_desc (sb, group, NULL);
- if (!desc || !desc->bg_free_inodes_count)
- continue;
- if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
- continue;
- if (!best_desc ||
- (le16_to_cpu(desc->bg_free_blocks_count) >
- le16_to_cpu(best_desc->bg_free_blocks_count))) {
- best_group = group;
- best_desc = desc;
- }
- }
- return best_group;
-}
-
-/*
* Orlov's allocator for directories.
*
* We always try to spread first-level directories.
@@ -436,12 +400,9 @@
sbi = EXT3_SB(sb);
es = sbi->s_es;
- if (S_ISDIR(mode)) {
- if (test_opt (sb, OLDALLOC))
- group = find_group_dir(sb, dir);
- else
- group = find_group_orlov(sb, dir);
- } else
+ if (S_ISDIR(mode))
+ group = find_group_orlov(sb, dir);
+ else
group = find_group_other(sb, dir);
err = -ENOSPC;
@@ -621,7 +582,7 @@
fail_drop:
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
brelse(bitmap_bh);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 12661e1..85fe655 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2899,7 +2899,7 @@
inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16;
inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16;
}
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
inode->i_size = le32_to_cpu(raw_inode->i_size);
inode->i_atime.tv_sec = (signed)le32_to_cpu(raw_inode->i_atime);
inode->i_ctime.tv_sec = (signed)le32_to_cpu(raw_inode->i_ctime);
diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c
index c7f4394..ba1b54e 100644
--- a/fs/ext3/ioctl.c
+++ b/fs/ext3/ioctl.c
@@ -150,30 +150,6 @@
mnt_drop_write(filp->f_path.mnt);
return err;
}
-#ifdef CONFIG_JBD_DEBUG
- case EXT3_IOC_WAIT_FOR_READONLY:
- /*
- * This is racy - by the time we're woken up and running,
- * the superblock could be released. And the module could
- * have been unloaded. So sue me.
- *
- * Returns 1 if it slept, else zero.
- */
- {
- struct super_block *sb = inode->i_sb;
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&EXT3_SB(sb)->ro_wait_queue, &wait);
- if (timer_pending(&EXT3_SB(sb)->turn_ro_timer)) {
- schedule();
- ret = 1;
- }
- remove_wait_queue(&EXT3_SB(sb)->ro_wait_queue, &wait);
- return ret;
- }
-#endif
case EXT3_IOC_GETRSVSZ:
if (test_opt(inode->i_sb, RESERVATION)
&& S_ISREG(inode->i_mode)
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 0629e09..642dc6d 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -1821,7 +1821,7 @@
de->name_len = 2;
strcpy (de->name, "..");
ext3_set_de_type(dir->i_sb, de, S_IFDIR);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
BUFFER_TRACE(dir_block, "call ext3_journal_dirty_metadata");
err = ext3_journal_dirty_metadata(handle, dir_block);
if (err)
@@ -1833,7 +1833,7 @@
if (err) {
out_clear_inode:
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
ext3_mark_inode_dirty(handle, inode);
iput (inode);
@@ -2170,7 +2170,7 @@
ext3_warning (inode->i_sb, "ext3_unlink",
"Deleting nonexistent file (%lu), %d",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
retval = ext3_delete_entry(handle, dir, de, bh);
if (retval)
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 7beb69a..922d289 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -652,8 +652,6 @@
seq_puts(seq, ",nouid32");
if (test_opt(sb, DEBUG))
seq_puts(seq, ",debug");
- if (test_opt(sb, OLDALLOC))
- seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT3_FS_XATTR
if (test_opt(sb, XATTR_USER))
seq_puts(seq, ",user_xattr");
@@ -1049,10 +1047,12 @@
set_opt (sbi->s_mount_opt, DEBUG);
break;
case Opt_oldalloc:
- set_opt (sbi->s_mount_opt, OLDALLOC);
+ ext3_msg(sb, KERN_WARNING,
+ "Ignoring deprecated oldalloc option");
break;
case Opt_orlov:
- clear_opt (sbi->s_mount_opt, OLDALLOC);
+ ext3_msg(sb, KERN_WARNING,
+ "Ignoring deprecated orlov option");
break;
#ifdef CONFIG_EXT3_FS_XATTR
case Opt_user_xattr:
@@ -2669,13 +2669,13 @@
/*
* If we have an unprocessed orphan list hanging
* around from a previously readonly bdev mount,
- * require a full umount/remount for now.
+ * require a full umount & mount for now.
*/
if (es->s_last_orphan) {
ext3_msg(sb, KERN_WARNING, "warning: couldn't "
"remount RDWR because of unprocessed "
"orphan inode list. Please "
- "umount/remount instead.");
+ "umount & mount instead.");
err = -EINVAL;
goto restore_opts;
}
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index f8224ad..f6dba45 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -28,7 +28,8 @@
*/
/*
- * Calculate the block group number and offset, given a block number
+ * Calculate the block group number and offset into the block/cluster
+ * allocation bitmap, given a block number
*/
void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr,
ext4_group_t *blockgrpp, ext4_grpblk_t *offsetp)
@@ -37,7 +38,8 @@
ext4_grpblk_t offset;
blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
- offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb));
+ offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
+ EXT4_SB(sb)->s_cluster_bits;
if (offsetp)
*offsetp = offset;
if (blockgrpp)
@@ -55,131 +57,170 @@
return 0;
}
-static int ext4_group_used_meta_blocks(struct super_block *sb,
+/* Return the number of clusters used for file system metadata; this
+ * represents the overhead needed by the file system.
+ */
+unsigned ext4_num_overhead_clusters(struct super_block *sb,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp)
+{
+ unsigned num_clusters;
+ int block_cluster = -1, inode_cluster = -1, itbl_cluster = -1, i, c;
+ ext4_fsblk_t start = ext4_group_first_block_no(sb, block_group);
+ ext4_fsblk_t itbl_blk;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+
+ /* This is the number of clusters used by the superblock,
+ * block group descriptors, and reserved block group
+ * descriptor blocks */
+ num_clusters = ext4_num_base_meta_clusters(sb, block_group);
+
+ /*
+ * For the allocation bitmaps and inode table, we first need
+ * to check to see if the block is in the block group. If it
+ * is, then check to see if the cluster is already accounted
+ * for in the clusters used for the base metadata cluster, or
+ * if we can increment the base metadata cluster to include
+ * that block. Otherwise, we will have to track the cluster
+ * used for the allocation bitmap or inode table explicitly.
+ * Normally all of these blocks are contiguous, so the special
+ * case handling shouldn't be necessary except for *very*
+ * unusual file system layouts.
+ */
+ if (ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp), block_group)) {
+ block_cluster = EXT4_B2C(sbi, (start -
+ ext4_block_bitmap(sb, gdp)));
+ if (block_cluster < num_clusters)
+ block_cluster = -1;
+ else if (block_cluster == num_clusters) {
+ num_clusters++;
+ block_cluster = -1;
+ }
+ }
+
+ if (ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp), block_group)) {
+ inode_cluster = EXT4_B2C(sbi,
+ start - ext4_inode_bitmap(sb, gdp));
+ if (inode_cluster < num_clusters)
+ inode_cluster = -1;
+ else if (inode_cluster == num_clusters) {
+ num_clusters++;
+ inode_cluster = -1;
+ }
+ }
+
+ itbl_blk = ext4_inode_table(sb, gdp);
+ for (i = 0; i < sbi->s_itb_per_group; i++) {
+ if (ext4_block_in_group(sb, itbl_blk + i, block_group)) {
+ c = EXT4_B2C(sbi, start - itbl_blk + i);
+ if ((c < num_clusters) || (c == inode_cluster) ||
+ (c == block_cluster) || (c == itbl_cluster))
+ continue;
+ if (c == num_clusters) {
+ num_clusters++;
+ continue;
+ }
+ num_clusters++;
+ itbl_cluster = c;
+ }
+ }
+
+ if (block_cluster != -1)
+ num_clusters++;
+ if (inode_cluster != -1)
+ num_clusters++;
+
+ return num_clusters;
+}
+
+static unsigned int num_clusters_in_group(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ unsigned int blocks;
+
+ if (block_group == ext4_get_groups_count(sb) - 1) {
+ /*
+ * Even though mke2fs always initializes the first and
+ * last group, just in case some other tool was used,
+ * we need to make sure we calculate the right free
+ * blocks.
+ */
+ blocks = ext4_blocks_count(EXT4_SB(sb)->s_es) -
+ ext4_group_first_block_no(sb, block_group);
+ } else
+ blocks = EXT4_BLOCKS_PER_GROUP(sb);
+ return EXT4_NUM_B2C(EXT4_SB(sb), blocks);
+}
+
+/* Initializes an uninitialized block bitmap */
+void ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp)
+{
+ unsigned int bit, bit_max;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ ext4_fsblk_t start, tmp;
+ int flex_bg = 0;
+
+ J_ASSERT_BH(bh, buffer_locked(bh));
+
+ /* If checksum is bad mark all blocks used to prevent allocation
+ * essentially implementing a per-group read-only flag. */
+ if (!ext4_group_desc_csum_verify(sbi, block_group, gdp)) {
+ ext4_error(sb, "Checksum bad for group %u", block_group);
+ ext4_free_group_clusters_set(sb, gdp, 0);
+ ext4_free_inodes_set(sb, gdp, 0);
+ ext4_itable_unused_set(sb, gdp, 0);
+ memset(bh->b_data, 0xff, sb->s_blocksize);
+ return;
+ }
+ memset(bh->b_data, 0, sb->s_blocksize);
+
+ bit_max = ext4_num_base_meta_clusters(sb, block_group);
+ for (bit = 0; bit < bit_max; bit++)
+ ext4_set_bit(bit, bh->b_data);
+
+ start = ext4_group_first_block_no(sb, block_group);
+
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ flex_bg = 1;
+
+ /* Set bits for block and inode bitmaps, and inode table */
+ tmp = ext4_block_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data);
+
+ tmp = ext4_inode_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data);
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data);
+ }
+
+ /*
+ * Also if the number of blocks within the group is less than
+ * the blocksize * 8 ( which is the size of bitmap ), set rest
+ * of the block bitmap to 1
+ */
+ ext4_mark_bitmap_end(num_clusters_in_group(sb, block_group),
+ sb->s_blocksize * 8, bh->b_data);
+}
+
+/* Return the number of free blocks in a block group. It is used when
+ * the block bitmap is uninitialized, so we can't just count the bits
+ * in the bitmap. */
+unsigned ext4_free_clusters_after_init(struct super_block *sb,
ext4_group_t block_group,
struct ext4_group_desc *gdp)
{
- ext4_fsblk_t tmp;
- struct ext4_sb_info *sbi = EXT4_SB(sb);
- /* block bitmap, inode bitmap, and inode table blocks */
- int used_blocks = sbi->s_itb_per_group + 2;
-
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
- if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp),
- block_group))
- used_blocks--;
-
- if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp),
- block_group))
- used_blocks--;
-
- tmp = ext4_inode_table(sb, gdp);
- for (; tmp < ext4_inode_table(sb, gdp) +
- sbi->s_itb_per_group; tmp++) {
- if (!ext4_block_in_group(sb, tmp, block_group))
- used_blocks -= 1;
- }
- }
- return used_blocks;
+ return num_clusters_in_group(sb, block_group) -
+ ext4_num_overhead_clusters(sb, block_group, gdp);
}
-/* Initializes an uninitialized block bitmap if given, and returns the
- * number of blocks free in the group. */
-unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
- ext4_group_t block_group, struct ext4_group_desc *gdp)
-{
- int bit, bit_max;
- ext4_group_t ngroups = ext4_get_groups_count(sb);
- unsigned free_blocks, group_blocks;
- struct ext4_sb_info *sbi = EXT4_SB(sb);
-
- if (bh) {
- J_ASSERT_BH(bh, buffer_locked(bh));
-
- /* If checksum is bad mark all blocks used to prevent allocation
- * essentially implementing a per-group read-only flag. */
- if (!ext4_group_desc_csum_verify(sbi, block_group, gdp)) {
- ext4_error(sb, "Checksum bad for group %u",
- block_group);
- ext4_free_blks_set(sb, gdp, 0);
- ext4_free_inodes_set(sb, gdp, 0);
- ext4_itable_unused_set(sb, gdp, 0);
- memset(bh->b_data, 0xff, sb->s_blocksize);
- return 0;
- }
- memset(bh->b_data, 0, sb->s_blocksize);
- }
-
- /* Check for superblock and gdt backups in this group */
- bit_max = ext4_bg_has_super(sb, block_group);
-
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG) ||
- block_group < le32_to_cpu(sbi->s_es->s_first_meta_bg) *
- sbi->s_desc_per_block) {
- if (bit_max) {
- bit_max += ext4_bg_num_gdb(sb, block_group);
- bit_max +=
- le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks);
- }
- } else { /* For META_BG_BLOCK_GROUPS */
- bit_max += ext4_bg_num_gdb(sb, block_group);
- }
-
- if (block_group == ngroups - 1) {
- /*
- * Even though mke2fs always initialize first and last group
- * if some other tool enabled the EXT4_BG_BLOCK_UNINIT we need
- * to make sure we calculate the right free blocks
- */
- group_blocks = ext4_blocks_count(sbi->s_es) -
- ext4_group_first_block_no(sb, ngroups - 1);
- } else {
- group_blocks = EXT4_BLOCKS_PER_GROUP(sb);
- }
-
- free_blocks = group_blocks - bit_max;
-
- if (bh) {
- ext4_fsblk_t start, tmp;
- int flex_bg = 0;
-
- for (bit = 0; bit < bit_max; bit++)
- ext4_set_bit(bit, bh->b_data);
-
- start = ext4_group_first_block_no(sb, block_group);
-
- if (EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_FLEX_BG))
- flex_bg = 1;
-
- /* Set bits for block and inode bitmaps, and inode table */
- tmp = ext4_block_bitmap(sb, gdp);
- if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
- ext4_set_bit(tmp - start, bh->b_data);
-
- tmp = ext4_inode_bitmap(sb, gdp);
- if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
- ext4_set_bit(tmp - start, bh->b_data);
-
- tmp = ext4_inode_table(sb, gdp);
- for (; tmp < ext4_inode_table(sb, gdp) +
- sbi->s_itb_per_group; tmp++) {
- if (!flex_bg ||
- ext4_block_in_group(sb, tmp, block_group))
- ext4_set_bit(tmp - start, bh->b_data);
- }
- /*
- * Also if the number of blocks within the group is
- * less than the blocksize * 8 ( which is the size
- * of bitmap ), set rest of the block bitmap to 1
- */
- ext4_mark_bitmap_end(group_blocks, sb->s_blocksize * 8,
- bh->b_data);
- }
- return free_blocks - ext4_group_used_meta_blocks(sb, block_group, gdp);
-}
-
-
/*
* The free blocks are managed by bitmaps. A file system contains several
* blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap
@@ -362,53 +403,54 @@
}
/**
- * ext4_has_free_blocks()
+ * ext4_has_free_clusters()
* @sbi: in-core super block structure.
- * @nblocks: number of needed blocks
+ * @nclusters: number of needed blocks
+ * @flags: flags from ext4_mb_new_blocks()
*
- * Check if filesystem has nblocks free & available for allocation.
+ * Check if filesystem has nclusters free & available for allocation.
* On success return 1, return 0 on failure.
*/
-static int ext4_has_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks, unsigned int flags)
+static int ext4_has_free_clusters(struct ext4_sb_info *sbi,
+ s64 nclusters, unsigned int flags)
{
- s64 free_blocks, dirty_blocks, root_blocks;
- struct percpu_counter *fbc = &sbi->s_freeblocks_counter;
- struct percpu_counter *dbc = &sbi->s_dirtyblocks_counter;
+ s64 free_clusters, dirty_clusters, root_clusters;
+ struct percpu_counter *fcc = &sbi->s_freeclusters_counter;
+ struct percpu_counter *dcc = &sbi->s_dirtyclusters_counter;
- free_blocks = percpu_counter_read_positive(fbc);
- dirty_blocks = percpu_counter_read_positive(dbc);
- root_blocks = ext4_r_blocks_count(sbi->s_es);
+ free_clusters = percpu_counter_read_positive(fcc);
+ dirty_clusters = percpu_counter_read_positive(dcc);
+ root_clusters = EXT4_B2C(sbi, ext4_r_blocks_count(sbi->s_es));
- if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
- EXT4_FREEBLOCKS_WATERMARK) {
- free_blocks = percpu_counter_sum_positive(fbc);
- dirty_blocks = percpu_counter_sum_positive(dbc);
+ if (free_clusters - (nclusters + root_clusters + dirty_clusters) <
+ EXT4_FREECLUSTERS_WATERMARK) {
+ free_clusters = EXT4_C2B(sbi, percpu_counter_sum_positive(fcc));
+ dirty_clusters = percpu_counter_sum_positive(dcc);
}
- /* Check whether we have space after
- * accounting for current dirty blocks & root reserved blocks.
+ /* Check whether we have space after accounting for current
+ * dirty clusters & root reserved clusters.
*/
- if (free_blocks >= ((root_blocks + nblocks) + dirty_blocks))
+ if (free_clusters >= ((root_clusters + nclusters) + dirty_clusters))
return 1;
- /* Hm, nope. Are (enough) root reserved blocks available? */
+ /* Hm, nope. Are (enough) root reserved clusters available? */
if (sbi->s_resuid == current_fsuid() ||
((sbi->s_resgid != 0) && in_group_p(sbi->s_resgid)) ||
capable(CAP_SYS_RESOURCE) ||
(flags & EXT4_MB_USE_ROOT_BLOCKS)) {
- if (free_blocks >= (nblocks + dirty_blocks))
+ if (free_clusters >= (nclusters + dirty_clusters))
return 1;
}
return 0;
}
-int ext4_claim_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks, unsigned int flags)
+int ext4_claim_free_clusters(struct ext4_sb_info *sbi,
+ s64 nclusters, unsigned int flags)
{
- if (ext4_has_free_blocks(sbi, nblocks, flags)) {
- percpu_counter_add(&sbi->s_dirtyblocks_counter, nblocks);
+ if (ext4_has_free_clusters(sbi, nclusters, flags)) {
+ percpu_counter_add(&sbi->s_dirtyclusters_counter, nclusters);
return 0;
} else
return -ENOSPC;
@@ -428,7 +470,7 @@
*/
int ext4_should_retry_alloc(struct super_block *sb, int *retries)
{
- if (!ext4_has_free_blocks(EXT4_SB(sb), 1, 0) ||
+ if (!ext4_has_free_clusters(EXT4_SB(sb), 1, 0) ||
(*retries)++ > 3 ||
!EXT4_SB(sb)->s_journal)
return 0;
@@ -444,7 +486,7 @@
* @handle: handle to this transaction
* @inode: file inode
* @goal: given target block(filesystem wide)
- * @count: pointer to total number of blocks needed
+ * @count: pointer to total number of clusters needed
* @errp: error code
*
* Return 1st allocated block number on success, *count stores total account
@@ -476,18 +518,19 @@
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
EXT4_I(inode)->i_allocated_meta_blocks += ar.len;
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- dquot_alloc_block_nofail(inode, ar.len);
+ dquot_alloc_block_nofail(inode,
+ EXT4_C2B(EXT4_SB(inode->i_sb), ar.len));
}
return ret;
}
/**
- * ext4_count_free_blocks() -- count filesystem free blocks
+ * ext4_count_free_clusters() -- count filesystem free clusters
* @sb: superblock
*
- * Adds up the number of free blocks from each block group.
+ * Adds up the number of free clusters from each block group.
*/
-ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb)
+ext4_fsblk_t ext4_count_free_clusters(struct super_block *sb)
{
ext4_fsblk_t desc_count;
struct ext4_group_desc *gdp;
@@ -508,7 +551,7 @@
gdp = ext4_get_group_desc(sb, i, NULL);
if (!gdp)
continue;
- desc_count += ext4_free_blks_count(sb, gdp);
+ desc_count += ext4_free_group_clusters(sb, gdp);
brelse(bitmap_bh);
bitmap_bh = ext4_read_block_bitmap(sb, i);
if (bitmap_bh == NULL)
@@ -516,12 +559,13 @@
x = ext4_count_free(bitmap_bh, sb->s_blocksize);
printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n",
- i, ext4_free_blks_count(sb, gdp), x);
+ i, ext4_free_group_clusters(sb, gdp), x);
bitmap_count += x;
}
brelse(bitmap_bh);
- printk(KERN_DEBUG "ext4_count_free_blocks: stored = %llu"
- ", computed = %llu, %llu\n", ext4_free_blocks_count(es),
+ printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu"
+ ", computed = %llu, %llu\n",
+ EXT4_B2C(sbi, ext4_free_blocks_count(es)),
desc_count, bitmap_count);
return bitmap_count;
#else
@@ -530,7 +574,7 @@
gdp = ext4_get_group_desc(sb, i, NULL);
if (!gdp)
continue;
- desc_count += ext4_free_blks_count(sb, gdp);
+ desc_count += ext4_free_group_clusters(sb, gdp);
}
return desc_count;
@@ -620,6 +664,31 @@
}
+/*
+ * This function returns the number of file system metadata clusters at
+ * the beginning of a block group, including the reserved gdt blocks.
+ */
+unsigned ext4_num_base_meta_clusters(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ unsigned num;
+
+ /* Check for superblock and gdt backups in this group */
+ num = ext4_bg_has_super(sb, block_group);
+
+ if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG) ||
+ block_group < le32_to_cpu(sbi->s_es->s_first_meta_bg) *
+ sbi->s_desc_per_block) {
+ if (num) {
+ num += ext4_bg_num_gdb(sb, block_group);
+ num += le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks);
+ }
+ } else { /* For META_BG_BLOCK_GROUPS */
+ num += ext4_bg_num_gdb(sb, block_group);
+ }
+ return EXT4_NUM_B2C(sbi, num);
+}
/**
* ext4_inode_to_goal_block - return a hint for block allocation
* @inode: inode for block allocation
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index b7d7bd0..5b0e26a 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -144,9 +144,17 @@
#define EXT4_MAP_UNWRITTEN (1 << BH_Unwritten)
#define EXT4_MAP_BOUNDARY (1 << BH_Boundary)
#define EXT4_MAP_UNINIT (1 << BH_Uninit)
+/* Sometimes (in the bigalloc case, from ext4_da_get_block_prep) the caller of
+ * ext4_map_blocks wants to know whether or not the underlying cluster has
+ * already been accounted for. EXT4_MAP_FROM_CLUSTER conveys to the caller that
+ * the requested mapping was from previously mapped (or delayed allocated)
+ * cluster. We use BH_AllocFromCluster only for this flag. BH_AllocFromCluster
+ * should never appear on buffer_head's state flags.
+ */
+#define EXT4_MAP_FROM_CLUSTER (1 << BH_AllocFromCluster)
#define EXT4_MAP_FLAGS (EXT4_MAP_NEW | EXT4_MAP_MAPPED |\
EXT4_MAP_UNWRITTEN | EXT4_MAP_BOUNDARY |\
- EXT4_MAP_UNINIT)
+ EXT4_MAP_UNINIT | EXT4_MAP_FROM_CLUSTER)
struct ext4_map_blocks {
ext4_fsblk_t m_pblk;
@@ -239,8 +247,11 @@
# define EXT4_BLOCK_SIZE(s) (EXT4_MIN_BLOCK_SIZE << (s)->s_log_block_size)
#endif
#define EXT4_ADDR_PER_BLOCK(s) (EXT4_BLOCK_SIZE(s) / sizeof(__u32))
+#define EXT4_CLUSTER_SIZE(s) (EXT4_BLOCK_SIZE(s) << \
+ EXT4_SB(s)->s_cluster_bits)
#ifdef __KERNEL__
# define EXT4_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits)
+# define EXT4_CLUSTER_BITS(s) (EXT4_SB(s)->s_cluster_bits)
#else
# define EXT4_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)
#endif
@@ -258,6 +269,14 @@
#endif
#define EXT4_BLOCK_ALIGN(size, blkbits) ALIGN((size), (1 << (blkbits)))
+/* Translate a block number to a cluster number */
+#define EXT4_B2C(sbi, blk) ((blk) >> (sbi)->s_cluster_bits)
+/* Translate a cluster number to a block number */
+#define EXT4_C2B(sbi, cluster) ((cluster) << (sbi)->s_cluster_bits)
+/* Translate # of blks to # of clusters */
+#define EXT4_NUM_B2C(sbi, blks) (((blks) + (sbi)->s_cluster_ratio - 1) >> \
+ (sbi)->s_cluster_bits)
+
/*
* Structure of a blocks group descriptor
*/
@@ -289,7 +308,7 @@
struct flex_groups {
atomic_t free_inodes;
- atomic_t free_blocks;
+ atomic_t free_clusters;
atomic_t used_dirs;
};
@@ -306,6 +325,7 @@
#define EXT4_DESC_SIZE(s) (EXT4_SB(s)->s_desc_size)
#ifdef __KERNEL__
# define EXT4_BLOCKS_PER_GROUP(s) (EXT4_SB(s)->s_blocks_per_group)
+# define EXT4_CLUSTERS_PER_GROUP(s) (EXT4_SB(s)->s_clusters_per_group)
# define EXT4_DESC_PER_BLOCK(s) (EXT4_SB(s)->s_desc_per_block)
# define EXT4_INODES_PER_GROUP(s) (EXT4_SB(s)->s_inodes_per_group)
# define EXT4_DESC_PER_BLOCK_BITS(s) (EXT4_SB(s)->s_desc_per_block_bits)
@@ -358,8 +378,7 @@
/* Flags that should be inherited by new inodes from their parent. */
#define EXT4_FL_INHERITED (EXT4_SECRM_FL | EXT4_UNRM_FL | EXT4_COMPR_FL |\
- EXT4_SYNC_FL | EXT4_IMMUTABLE_FL | EXT4_APPEND_FL |\
- EXT4_NODUMP_FL | EXT4_NOATIME_FL |\
+ EXT4_SYNC_FL | EXT4_NODUMP_FL | EXT4_NOATIME_FL |\
EXT4_NOCOMPR_FL | EXT4_JOURNAL_DATA_FL |\
EXT4_NOTAIL_FL | EXT4_DIRSYNC_FL)
@@ -520,6 +539,8 @@
#define EXT4_GET_BLOCKS_PUNCH_OUT_EXT 0x0020
/* Don't normalize allocation size (used for fallocate) */
#define EXT4_GET_BLOCKS_NO_NORMALIZE 0x0040
+ /* Request will not result in inode size update (user for fallocate) */
+#define EXT4_GET_BLOCKS_KEEP_SIZE 0x0080
/*
* Flags used by ext4_free_blocks
@@ -528,6 +549,13 @@
#define EXT4_FREE_BLOCKS_FORGET 0x0002
#define EXT4_FREE_BLOCKS_VALIDATED 0x0004
#define EXT4_FREE_BLOCKS_NO_QUOT_UPDATE 0x0008
+#define EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER 0x0010
+#define EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER 0x0020
+
+/*
+ * Flags used by ext4_discard_partial_page_buffers
+ */
+#define EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED 0x0001
/*
* ioctl commands
@@ -538,9 +566,6 @@
#define EXT4_IOC_SETVERSION _IOW('f', 4, long)
#define EXT4_IOC_GETVERSION_OLD FS_IOC_GETVERSION
#define EXT4_IOC_SETVERSION_OLD FS_IOC_SETVERSION
-#ifdef CONFIG_JBD2_DEBUG
-#define EXT4_IOC_WAIT_FOR_READONLY _IOR('f', 99, long)
-#endif
#define EXT4_IOC_GETRSVSZ _IOR('f', 5, long)
#define EXT4_IOC_SETRSVSZ _IOW('f', 6, long)
#define EXT4_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long)
@@ -563,9 +588,6 @@
#define EXT4_IOC32_SETRSVSZ _IOW('f', 6, int)
#define EXT4_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int)
#define EXT4_IOC32_GROUP_ADD _IOW('f', 8, struct compat_ext4_new_group_input)
-#ifdef CONFIG_JBD2_DEBUG
-#define EXT4_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int)
-#endif
#define EXT4_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION
#define EXT4_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION
#endif
@@ -837,6 +859,7 @@
ext4_group_t i_last_alloc_group;
/* allocation reservation info for delalloc */
+ /* In case of bigalloc, these refer to clusters rather than blocks */
unsigned int i_reserved_data_blocks;
unsigned int i_reserved_meta_blocks;
unsigned int i_allocated_meta_blocks;
@@ -886,7 +909,6 @@
/*
* Mount flags
*/
-#define EXT4_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */
#define EXT4_MOUNT_GRPID 0x00004 /* Create files with directory's group */
#define EXT4_MOUNT_DEBUG 0x00008 /* Some debugging messages */
#define EXT4_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */
@@ -918,6 +940,9 @@
#define EXT4_MOUNT_DISCARD 0x40000000 /* Issue DISCARD requests */
#define EXT4_MOUNT_INIT_INODE_TABLE 0x80000000 /* Initialize uninitialized itables */
+#define EXT4_MOUNT2_EXPLICIT_DELALLOC 0x00000001 /* User explicitly
+ specified delalloc */
+
#define clear_opt(sb, opt) EXT4_SB(sb)->s_mount_opt &= \
~EXT4_MOUNT_##opt
#define set_opt(sb, opt) EXT4_SB(sb)->s_mount_opt |= \
@@ -968,9 +993,9 @@
/*10*/ __le32 s_free_inodes_count; /* Free inodes count */
__le32 s_first_data_block; /* First Data Block */
__le32 s_log_block_size; /* Block size */
- __le32 s_obso_log_frag_size; /* Obsoleted fragment size */
+ __le32 s_log_cluster_size; /* Allocation cluster size */
/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */
- __le32 s_obso_frags_per_group; /* Obsoleted fragments per group */
+ __le32 s_clusters_per_group; /* # Clusters per group */
__le32 s_inodes_per_group; /* # Inodes per group */
__le32 s_mtime; /* Mount time */
/*30*/ __le32 s_wtime; /* Write time */
@@ -1066,7 +1091,10 @@
__u8 s_last_error_func[32]; /* function where the error happened */
#define EXT4_S_ERR_END offsetof(struct ext4_super_block, s_mount_opts)
__u8 s_mount_opts[64];
- __le32 s_reserved[112]; /* Padding to the end of the block */
+ __le32 s_usr_quota_inum; /* inode for tracking user quota */
+ __le32 s_grp_quota_inum; /* inode for tracking group quota */
+ __le32 s_overhead_clusters; /* overhead blocks/clusters in fs */
+ __le32 s_reserved[109]; /* Padding to the end of the block */
};
#define EXT4_S_ERR_LEN (EXT4_S_ERR_END - EXT4_S_ERR_START)
@@ -1086,6 +1114,7 @@
unsigned long s_desc_size; /* Size of a group descriptor in bytes */
unsigned long s_inodes_per_block;/* Number of inodes per block */
unsigned long s_blocks_per_group;/* Number of blocks in a group */
+ unsigned long s_clusters_per_group; /* Number of clusters in a group */
unsigned long s_inodes_per_group;/* Number of inodes in a group */
unsigned long s_itb_per_group; /* Number of inode table blocks per group */
unsigned long s_gdb_count; /* Number of group descriptor blocks */
@@ -1094,6 +1123,8 @@
ext4_group_t s_blockfile_groups;/* Groups acceptable for non-extent files */
unsigned long s_overhead_last; /* Last calculated overhead */
unsigned long s_blocks_last; /* Last seen block count */
+ unsigned int s_cluster_ratio; /* Number of blocks per cluster */
+ unsigned int s_cluster_bits; /* log2 of s_cluster_ratio */
loff_t s_bitmap_maxbytes; /* max bytes for bitmap files */
struct buffer_head * s_sbh; /* Buffer containing the super block */
struct ext4_super_block *s_es; /* Pointer to the super block in the buffer */
@@ -1117,10 +1148,10 @@
u32 s_hash_seed[4];
int s_def_hash_version;
int s_hash_unsigned; /* 3 if hash should be signed, 0 if not */
- struct percpu_counter s_freeblocks_counter;
+ struct percpu_counter s_freeclusters_counter;
struct percpu_counter s_freeinodes_counter;
struct percpu_counter s_dirs_counter;
- struct percpu_counter s_dirtyblocks_counter;
+ struct percpu_counter s_dirtyclusters_counter;
struct blockgroup_lock *s_blockgroup_lock;
struct proc_dir_entry *s_proc;
struct kobject s_kobj;
@@ -1136,10 +1167,6 @@
u32 s_max_batch_time;
u32 s_min_batch_time;
struct block_device *journal_bdev;
-#ifdef CONFIG_JBD2_DEBUG
- struct timer_list turn_ro_timer; /* For turning read-only (crash simulation) */
- wait_queue_head_t ro_wait_queue; /* For people waiting for the fs to go read-only */
-#endif
#ifdef CONFIG_QUOTA
char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
@@ -1248,6 +1275,15 @@
ino <= le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count));
}
+static inline void ext4_set_io_unwritten_flag(struct inode *inode,
+ struct ext4_io_end *io_end)
+{
+ if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
+ io_end->flag |= EXT4_IO_END_UNWRITTEN;
+ atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
+ }
+}
+
/*
* Inode dynamic state flags
*/
@@ -1360,6 +1396,7 @@
#define EXT4_FEATURE_RO_COMPAT_DIR_NLINK 0x0020
#define EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE 0x0040
#define EXT4_FEATURE_RO_COMPAT_QUOTA 0x0100
+#define EXT4_FEATURE_RO_COMPAT_BIGALLOC 0x0200
#define EXT4_FEATURE_INCOMPAT_COMPRESSION 0x0001
#define EXT4_FEATURE_INCOMPAT_FILETYPE 0x0002
@@ -1402,7 +1439,8 @@
EXT4_FEATURE_RO_COMPAT_DIR_NLINK | \
EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE | \
EXT4_FEATURE_RO_COMPAT_BTREE_DIR |\
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE)
+ EXT4_FEATURE_RO_COMPAT_HUGE_FILE |\
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)
/*
* Default values for user and/or group using reserved blocks
@@ -1735,9 +1773,9 @@
unsigned int flags,
unsigned long *count,
int *errp);
-extern int ext4_claim_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks, unsigned int flags);
-extern ext4_fsblk_t ext4_count_free_blocks(struct super_block *);
+extern int ext4_claim_free_clusters(struct ext4_sb_info *sbi,
+ s64 nclusters, unsigned int flags);
+extern ext4_fsblk_t ext4_count_free_clusters(struct super_block *);
extern void ext4_check_blocks_bitmap(struct super_block *);
extern struct ext4_group_desc * ext4_get_group_desc(struct super_block * sb,
ext4_group_t block_group,
@@ -1745,12 +1783,18 @@
extern int ext4_should_retry_alloc(struct super_block *sb, int *retries);
struct buffer_head *ext4_read_block_bitmap(struct super_block *sb,
ext4_group_t block_group);
-extern unsigned ext4_init_block_bitmap(struct super_block *sb,
- struct buffer_head *bh,
- ext4_group_t group,
- struct ext4_group_desc *desc);
-#define ext4_free_blocks_after_init(sb, group, desc) \
- ext4_init_block_bitmap(sb, NULL, group, desc)
+extern void ext4_init_block_bitmap(struct super_block *sb,
+ struct buffer_head *bh,
+ ext4_group_t group,
+ struct ext4_group_desc *desc);
+extern unsigned ext4_free_clusters_after_init(struct super_block *sb,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp);
+extern unsigned ext4_num_base_meta_clusters(struct super_block *sb,
+ ext4_group_t block_group);
+extern unsigned ext4_num_overhead_clusters(struct super_block *sb,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp);
ext4_fsblk_t ext4_inode_to_goal_block(struct inode *);
/* dir.c */
@@ -1776,7 +1820,8 @@
/* ialloc.c */
extern struct inode *ext4_new_inode(handle_t *, struct inode *, int,
- const struct qstr *qstr, __u32 goal);
+ const struct qstr *qstr, __u32 goal,
+ uid_t *owner);
extern void ext4_free_inode(handle_t *, struct inode *);
extern struct inode * ext4_orphan_get(struct super_block *, unsigned long);
extern unsigned long ext4_count_free_inodes(struct super_block *);
@@ -1839,6 +1884,12 @@
struct address_space *mapping, loff_t from);
extern int ext4_block_zero_page_range(handle_t *handle,
struct address_space *mapping, loff_t from, loff_t length);
+extern int ext4_discard_partial_page_buffers(handle_t *handle,
+ struct address_space *mapping, loff_t from,
+ loff_t length, int flags);
+extern int ext4_discard_partial_page_buffers_no_lock(handle_t *handle,
+ struct inode *inode, struct page *page, loff_t from,
+ loff_t length, int flags);
extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
extern qsize_t *ext4_get_reserved_space(struct inode *inode);
extern void ext4_da_update_reserve_space(struct inode *inode,
@@ -1878,40 +1929,40 @@
extern void *ext4_kvmalloc(size_t size, gfp_t flags);
extern void *ext4_kvzalloc(size_t size, gfp_t flags);
extern void ext4_kvfree(void *ptr);
-extern void __ext4_error(struct super_block *, const char *, unsigned int,
- const char *, ...)
- __attribute__ ((format (printf, 4, 5)));
+extern __printf(4, 5)
+void __ext4_error(struct super_block *, const char *, unsigned int,
+ const char *, ...);
#define ext4_error(sb, message...) __ext4_error(sb, __func__, \
__LINE__, ## message)
-extern void ext4_error_inode(struct inode *, const char *, unsigned int,
- ext4_fsblk_t, const char *, ...)
- __attribute__ ((format (printf, 5, 6)));
-extern void ext4_error_file(struct file *, const char *, unsigned int,
- ext4_fsblk_t, const char *, ...)
- __attribute__ ((format (printf, 5, 6)));
+extern __printf(5, 6)
+void ext4_error_inode(struct inode *, const char *, unsigned int, ext4_fsblk_t,
+ const char *, ...);
+extern __printf(5, 6)
+void ext4_error_file(struct file *, const char *, unsigned int, ext4_fsblk_t,
+ const char *, ...);
extern void __ext4_std_error(struct super_block *, const char *,
unsigned int, int);
-extern void __ext4_abort(struct super_block *, const char *, unsigned int,
- const char *, ...)
- __attribute__ ((format (printf, 4, 5)));
+extern __printf(4, 5)
+void __ext4_abort(struct super_block *, const char *, unsigned int,
+ const char *, ...);
#define ext4_abort(sb, message...) __ext4_abort(sb, __func__, \
__LINE__, ## message)
-extern void __ext4_warning(struct super_block *, const char *, unsigned int,
- const char *, ...)
- __attribute__ ((format (printf, 4, 5)));
+extern __printf(4, 5)
+void __ext4_warning(struct super_block *, const char *, unsigned int,
+ const char *, ...);
#define ext4_warning(sb, message...) __ext4_warning(sb, __func__, \
__LINE__, ## message)
-extern void ext4_msg(struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void ext4_msg(struct super_block *, const char *, const char *, ...);
extern void __dump_mmp_msg(struct super_block *, struct mmp_struct *mmp,
const char *, unsigned int, const char *);
#define dump_mmp_msg(sb, mmp, msg) __dump_mmp_msg(sb, mmp, __func__, \
__LINE__, msg)
-extern void __ext4_grp_locked_error(const char *, unsigned int, \
- struct super_block *, ext4_group_t, \
- unsigned long, ext4_fsblk_t, \
- const char *, ...)
- __attribute__ ((format (printf, 7, 8)));
+extern __printf(7, 8)
+void __ext4_grp_locked_error(const char *, unsigned int,
+ struct super_block *, ext4_group_t,
+ unsigned long, ext4_fsblk_t,
+ const char *, ...);
#define ext4_grp_locked_error(sb, grp, message...) \
__ext4_grp_locked_error(__func__, __LINE__, (sb), (grp), ## message)
extern void ext4_update_dynamic_rev(struct super_block *sb);
@@ -1927,8 +1978,8 @@
struct ext4_group_desc *bg);
extern ext4_fsblk_t ext4_inode_table(struct super_block *sb,
struct ext4_group_desc *bg);
-extern __u32 ext4_free_blks_count(struct super_block *sb,
- struct ext4_group_desc *bg);
+extern __u32 ext4_free_group_clusters(struct super_block *sb,
+ struct ext4_group_desc *bg);
extern __u32 ext4_free_inodes_count(struct super_block *sb,
struct ext4_group_desc *bg);
extern __u32 ext4_used_dirs_count(struct super_block *sb,
@@ -1941,8 +1992,9 @@
struct ext4_group_desc *bg, ext4_fsblk_t blk);
extern void ext4_inode_table_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk);
-extern void ext4_free_blks_set(struct super_block *sb,
- struct ext4_group_desc *bg, __u32 count);
+extern void ext4_free_group_clusters_set(struct super_block *sb,
+ struct ext4_group_desc *bg,
+ __u32 count);
extern void ext4_free_inodes_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count);
extern void ext4_used_dirs_set(struct super_block *sb,
@@ -2051,13 +2103,13 @@
} while (0)
#ifdef CONFIG_SMP
-/* Each CPU can accumulate percpu_counter_batch blocks in their local
- * counters. So we need to make sure we have free blocks more
+/* Each CPU can accumulate percpu_counter_batch clusters in their local
+ * counters. So we need to make sure we have free clusters more
* than percpu_counter_batch * nr_cpu_ids. Also add a window of 4 times.
*/
-#define EXT4_FREEBLOCKS_WATERMARK (4 * (percpu_counter_batch * nr_cpu_ids))
+#define EXT4_FREECLUSTERS_WATERMARK (4 * (percpu_counter_batch * nr_cpu_ids))
#else
-#define EXT4_FREEBLOCKS_WATERMARK 0
+#define EXT4_FREECLUSTERS_WATERMARK 0
#endif
static inline void ext4_update_i_disksize(struct inode *inode, loff_t newsize)
@@ -2243,10 +2295,19 @@
enum ext4_state_bits {
BH_Uninit /* blocks are allocated but uninitialized on disk */
= BH_JBDPrivateStart,
+ BH_AllocFromCluster, /* allocated blocks were part of already
+ * allocated cluster. Note that this flag will
+ * never, ever appear in a buffer_head's state
+ * flag. See EXT4_MAP_FROM_CLUSTER to see where
+ * this is used. */
+ BH_Da_Mapped, /* Delayed allocated block that now has a mapping. This
+ * flag is set when ext4_map_blocks is called on a
+ * delayed allocated block to get its real mapping. */
};
BUFFER_FNS(Uninit, uninit)
TAS_BUFFER_FNS(Uninit, uninit)
+BUFFER_FNS(Da_Mapped, da_mapped)
/*
* Add new method to test wether block and inode bitmaps are properly
@@ -2282,4 +2343,6 @@
#endif /* __KERNEL__ */
+#include "ext4_extents.h"
+
#endif /* _EXT4_H */
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 095c36f..a52db3a 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -290,5 +290,7 @@
struct ext4_ext_path *);
extern void ext4_ext_drop_refs(struct ext4_ext_path *);
extern int ext4_ext_check_inode(struct inode *inode);
+extern int ext4_find_delalloc_cluster(struct inode *inode, ext4_lblk_t lblk,
+ int search_hint_reverse);
#endif /* _EXT4_EXTENTS */
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index f5240aa..aca1790 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -109,9 +109,11 @@
if (ext4_handle_valid(handle)) {
err = jbd2_journal_dirty_metadata(handle, bh);
- if (err)
- ext4_journal_abort_handle(where, line, __func__,
- bh, handle, err);
+ if (err) {
+ /* Errors can only happen if there is a bug */
+ handle->h_err = err;
+ __ext4_journal_stop(where, line, handle);
+ }
} else {
if (inode)
mark_buffer_dirty_inode(bh, inode);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 57cf568..61fa9e1 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -42,7 +42,6 @@
#include <asm/uaccess.h>
#include <linux/fiemap.h>
#include "ext4_jbd2.h"
-#include "ext4_extents.h"
#include <trace/events/ext4.h>
@@ -96,13 +95,17 @@
* - ENOMEM
* - EIO
*/
-static int ext4_ext_dirty(handle_t *handle, struct inode *inode,
- struct ext4_ext_path *path)
+#define ext4_ext_dirty(handle, inode, path) \
+ __ext4_ext_dirty(__func__, __LINE__, (handle), (inode), (path))
+static int __ext4_ext_dirty(const char *where, unsigned int line,
+ handle_t *handle, struct inode *inode,
+ struct ext4_ext_path *path)
{
int err;
if (path->p_bh) {
/* path points to block */
- err = ext4_handle_dirty_metadata(handle, inode, path->p_bh);
+ err = __ext4_handle_dirty_metadata(where, line, handle,
+ inode, path->p_bh);
} else {
/* path points to leaf/index in inode body */
err = ext4_mark_inode_dirty(handle, inode);
@@ -114,11 +117,9 @@
struct ext4_ext_path *path,
ext4_lblk_t block)
{
- int depth;
-
if (path) {
+ int depth = path->p_depth;
struct ext4_extent *ex;
- depth = path->p_depth;
/*
* Try to predict block placement assuming that we are
@@ -180,12 +181,10 @@
size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 6)
- size = 6;
+ if (!check && size > 6)
+ size = 6;
#endif
- }
return size;
}
@@ -195,12 +194,10 @@
size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent_idx);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 5)
- size = 5;
+ if (!check && size > 5)
+ size = 5;
#endif
- }
return size;
}
@@ -211,12 +208,10 @@
size = sizeof(EXT4_I(inode)->i_data);
size -= sizeof(struct ext4_extent_header);
size /= sizeof(struct ext4_extent);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 3)
- size = 3;
+ if (!check && size > 3)
+ size = 3;
#endif
- }
return size;
}
@@ -227,12 +222,10 @@
size = sizeof(EXT4_I(inode)->i_data);
size -= sizeof(struct ext4_extent_header);
size /= sizeof(struct ext4_extent_idx);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 4)
- size = 4;
+ if (!check && size > 4)
+ size = 4;
#endif
- }
return size;
}
@@ -244,7 +237,7 @@
int ext4_ext_calc_metadata_amount(struct inode *inode, ext4_lblk_t lblock)
{
struct ext4_inode_info *ei = EXT4_I(inode);
- int idxs, num = 0;
+ int idxs;
idxs = ((inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent_idx));
@@ -259,6 +252,8 @@
*/
if (ei->i_da_metadata_calc_len &&
ei->i_da_metadata_calc_last_lblock+1 == lblock) {
+ int num = 0;
+
if ((ei->i_da_metadata_calc_len % idxs) == 0)
num++;
if ((ei->i_da_metadata_calc_len % (idxs*idxs)) == 0)
@@ -321,8 +316,6 @@
struct ext4_extent_header *eh,
int depth)
{
- struct ext4_extent *ext;
- struct ext4_extent_idx *ext_idx;
unsigned short entries;
if (eh->eh_entries == 0)
return 1;
@@ -331,7 +324,7 @@
if (depth == 0) {
/* leaf entries */
- ext = EXT_FIRST_EXTENT(eh);
+ struct ext4_extent *ext = EXT_FIRST_EXTENT(eh);
while (entries) {
if (!ext4_valid_extent(inode, ext))
return 0;
@@ -339,7 +332,7 @@
entries--;
}
} else {
- ext_idx = EXT_FIRST_INDEX(eh);
+ struct ext4_extent_idx *ext_idx = EXT_FIRST_INDEX(eh);
while (entries) {
if (!ext4_valid_extent_idx(inode, ext_idx))
return 0;
@@ -751,31 +744,30 @@
return -EIO;
}
- len = EXT_MAX_INDEX(curp->p_hdr) - curp->p_idx;
if (logical > le32_to_cpu(curp->p_idx->ei_block)) {
/* insert after */
- if (curp->p_idx != EXT_LAST_INDEX(curp->p_hdr)) {
- len = (len - 1) * sizeof(struct ext4_extent_idx);
- len = len < 0 ? 0 : len;
- ext_debug("insert new index %d after: %llu. "
- "move %d from 0x%p to 0x%p\n",
- logical, ptr, len,
- (curp->p_idx + 1), (curp->p_idx + 2));
- memmove(curp->p_idx + 2, curp->p_idx + 1, len);
- }
+ ext_debug("insert new index %d after: %llu\n", logical, ptr);
ix = curp->p_idx + 1;
} else {
/* insert before */
- len = len * sizeof(struct ext4_extent_idx);
- len = len < 0 ? 0 : len;
- ext_debug("insert new index %d before: %llu. "
- "move %d from 0x%p to 0x%p\n",
- logical, ptr, len,
- curp->p_idx, (curp->p_idx + 1));
- memmove(curp->p_idx + 1, curp->p_idx, len);
+ ext_debug("insert new index %d before: %llu\n", logical, ptr);
ix = curp->p_idx;
}
+ len = EXT_LAST_INDEX(curp->p_hdr) - ix + 1;
+ BUG_ON(len < 0);
+ if (len > 0) {
+ ext_debug("insert new index %d: "
+ "move %d indices from 0x%p to 0x%p\n",
+ logical, len, ix, ix + 1);
+ memmove(ix + 1, ix, len * sizeof(struct ext4_extent_idx));
+ }
+
+ if (unlikely(ix > EXT_MAX_INDEX(curp->p_hdr))) {
+ EXT4_ERROR_INODE(inode, "ix > EXT_MAX_INDEX!");
+ return -EIO;
+ }
+
ix->ei_block = cpu_to_le32(logical);
ext4_idx_store_pblock(ix, ptr);
le16_add_cpu(&curp->p_hdr->eh_entries, 1);
@@ -1042,16 +1034,14 @@
*/
static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode,
unsigned int flags,
- struct ext4_ext_path *path,
struct ext4_extent *newext)
{
- struct ext4_ext_path *curp = path;
struct ext4_extent_header *neh;
struct buffer_head *bh;
ext4_fsblk_t newblock;
int err = 0;
- newblock = ext4_ext_new_meta_block(handle, inode, path,
+ newblock = ext4_ext_new_meta_block(handle, inode, NULL,
newext, &err, flags);
if (newblock == 0)
return err;
@@ -1071,7 +1061,8 @@
}
/* move top-level index/leaf into new block */
- memmove(bh->b_data, curp->p_hdr, sizeof(EXT4_I(inode)->i_data));
+ memmove(bh->b_data, EXT4_I(inode)->i_data,
+ sizeof(EXT4_I(inode)->i_data));
/* set size of new block */
neh = ext_block_hdr(bh);
@@ -1089,32 +1080,23 @@
if (err)
goto out;
- /* create index in new top-level index: num,max,pointer */
- err = ext4_ext_get_access(handle, inode, curp);
- if (err)
- goto out;
-
- curp->p_hdr->eh_magic = EXT4_EXT_MAGIC;
- curp->p_hdr->eh_max = cpu_to_le16(ext4_ext_space_root_idx(inode, 0));
- curp->p_hdr->eh_entries = cpu_to_le16(1);
- curp->p_idx = EXT_FIRST_INDEX(curp->p_hdr);
-
- if (path[0].p_hdr->eh_depth)
- curp->p_idx->ei_block =
- EXT_FIRST_INDEX(path[0].p_hdr)->ei_block;
- else
- curp->p_idx->ei_block =
- EXT_FIRST_EXTENT(path[0].p_hdr)->ee_block;
- ext4_idx_store_pblock(curp->p_idx, newblock);
-
+ /* Update top-level index: num,max,pointer */
neh = ext_inode_hdr(inode);
+ neh->eh_entries = cpu_to_le16(1);
+ ext4_idx_store_pblock(EXT_FIRST_INDEX(neh), newblock);
+ if (neh->eh_depth == 0) {
+ /* Root extent block becomes index block */
+ neh->eh_max = cpu_to_le16(ext4_ext_space_root_idx(inode, 0));
+ EXT_FIRST_INDEX(neh)->ei_block =
+ EXT_FIRST_EXTENT(neh)->ee_block;
+ }
ext_debug("new root: num %d(%d), lblock %d, ptr %llu\n",
le16_to_cpu(neh->eh_entries), le16_to_cpu(neh->eh_max),
le32_to_cpu(EXT_FIRST_INDEX(neh)->ei_block),
ext4_idx_pblock(EXT_FIRST_INDEX(neh)));
- neh->eh_depth = cpu_to_le16(path->p_depth + 1);
- err = ext4_ext_dirty(handle, inode, curp);
+ neh->eh_depth = cpu_to_le16(neh->eh_depth + 1);
+ ext4_mark_inode_dirty(handle, inode);
out:
brelse(bh);
@@ -1162,8 +1144,7 @@
err = PTR_ERR(path);
} else {
/* tree is full, time to grow in depth */
- err = ext4_ext_grow_indepth(handle, inode, flags,
- path, newext);
+ err = ext4_ext_grow_indepth(handle, inode, flags, newext);
if (err)
goto out;
@@ -1235,9 +1216,9 @@
if (unlikely(ix != EXT_FIRST_INDEX(path[depth].p_hdr))) {
EXT4_ERROR_INODE(inode,
"ix (%d) != EXT_FIRST_INDEX (%d) (depth %d)!",
- ix != NULL ? ix->ei_block : 0,
+ ix != NULL ? le32_to_cpu(ix->ei_block) : 0,
EXT_FIRST_INDEX(path[depth].p_hdr) != NULL ?
- EXT_FIRST_INDEX(path[depth].p_hdr)->ei_block : 0,
+ le32_to_cpu(EXT_FIRST_INDEX(path[depth].p_hdr)->ei_block) : 0,
depth);
return -EIO;
}
@@ -1260,13 +1241,14 @@
/*
* search the closest allocated block to the right for *logical
* and returns it at @logical + it's physical address at @phys
- * if *logical is the smallest allocated block, the function
+ * if *logical is the largest allocated block, the function
* returns 0 at @phys
* return value contains 0 (success) or error code
*/
static int ext4_ext_search_right(struct inode *inode,
struct ext4_ext_path *path,
- ext4_lblk_t *logical, ext4_fsblk_t *phys)
+ ext4_lblk_t *logical, ext4_fsblk_t *phys,
+ struct ext4_extent **ret_ex)
{
struct buffer_head *bh = NULL;
struct ext4_extent_header *eh;
@@ -1308,9 +1290,7 @@
return -EIO;
}
}
- *logical = le32_to_cpu(ex->ee_block);
- *phys = ext4_ext_pblock(ex);
- return 0;
+ goto found_extent;
}
if (unlikely(*logical < (le32_to_cpu(ex->ee_block) + ee_len))) {
@@ -1323,9 +1303,7 @@
if (ex != EXT_LAST_EXTENT(path[depth].p_hdr)) {
/* next allocated block in this leaf */
ex++;
- *logical = le32_to_cpu(ex->ee_block);
- *phys = ext4_ext_pblock(ex);
- return 0;
+ goto found_extent;
}
/* go up and search for index to the right */
@@ -1368,9 +1346,12 @@
return -EIO;
}
ex = EXT_FIRST_EXTENT(eh);
+found_extent:
*logical = le32_to_cpu(ex->ee_block);
*phys = ext4_ext_pblock(ex);
- put_bh(bh);
+ *ret_ex = ex;
+ if (bh)
+ put_bh(bh);
return 0;
}
@@ -1395,7 +1376,8 @@
while (depth >= 0) {
if (depth == path->p_depth) {
/* leaf */
- if (path[depth].p_ext !=
+ if (path[depth].p_ext &&
+ path[depth].p_ext !=
EXT_LAST_EXTENT(path[depth].p_hdr))
return le32_to_cpu(path[depth].p_ext[1].ee_block);
} else {
@@ -1623,7 +1605,8 @@
* such that there will be no overlap, and then returns 1.
* If there is no overlap found, it returns 0.
*/
-static unsigned int ext4_ext_check_overlap(struct inode *inode,
+static unsigned int ext4_ext_check_overlap(struct ext4_sb_info *sbi,
+ struct inode *inode,
struct ext4_extent *newext,
struct ext4_ext_path *path)
{
@@ -1637,6 +1620,7 @@
if (!path[depth].p_ext)
goto out;
b2 = le32_to_cpu(path[depth].p_ext->ee_block);
+ b2 &= ~(sbi->s_cluster_ratio - 1);
/*
* get the next allocated block if the extent in the path
@@ -1646,6 +1630,7 @@
b2 = ext4_ext_next_allocated_block(path);
if (b2 == EXT_MAX_BLOCKS)
goto out;
+ b2 &= ~(sbi->s_cluster_ratio - 1);
}
/* check for wrap through zero on extent logical start block*/
@@ -1697,7 +1682,7 @@
/* try to insert block into found extent and return */
if (ex && !(flag & EXT4_GET_BLOCKS_PRE_IO)
&& ext4_can_extents_be_merged(inode, ex, newext)) {
- ext_debug("append [%d]%d block to %d:[%d]%d (from %llu)\n",
+ ext_debug("append [%d]%d block to %u:[%d]%d (from %llu)\n",
ext4_ext_is_uninitialized(newext),
ext4_ext_get_actual_len(newext),
le32_to_cpu(ex->ee_block),
@@ -1735,7 +1720,7 @@
if (le32_to_cpu(newext->ee_block) > le32_to_cpu(fex->ee_block))
next = ext4_ext_next_leaf_block(path);
if (next != EXT_MAX_BLOCKS) {
- ext_debug("next leaf block - %d\n", next);
+ ext_debug("next leaf block - %u\n", next);
BUG_ON(npath != NULL);
npath = ext4_ext_find_extent(inode, next, NULL);
if (IS_ERR(npath))
@@ -1773,46 +1758,51 @@
if (!nearex) {
/* there is no extent in this leaf, create first one */
- ext_debug("first extent in the leaf: %d:%llu:[%d]%d\n",
+ ext_debug("first extent in the leaf: %u:%llu:[%d]%d\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_uninitialized(newext),
ext4_ext_get_actual_len(newext));
- path[depth].p_ext = EXT_FIRST_EXTENT(eh);
- } else if (le32_to_cpu(newext->ee_block)
+ nearex = EXT_FIRST_EXTENT(eh);
+ } else {
+ if (le32_to_cpu(newext->ee_block)
> le32_to_cpu(nearex->ee_block)) {
-/* BUG_ON(newext->ee_block == nearex->ee_block); */
- if (nearex != EXT_LAST_EXTENT(eh)) {
- len = EXT_MAX_EXTENT(eh) - nearex;
- len = (len - 1) * sizeof(struct ext4_extent);
- len = len < 0 ? 0 : len;
- ext_debug("insert %d:%llu:[%d]%d after: nearest 0x%p, "
- "move %d from 0x%p to 0x%p\n",
+ /* Insert after */
+ ext_debug("insert %u:%llu:[%d]%d before: "
+ "nearest %p\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_uninitialized(newext),
ext4_ext_get_actual_len(newext),
- nearex, len, nearex + 1, nearex + 2);
- memmove(nearex + 2, nearex + 1, len);
+ nearex);
+ nearex++;
+ } else {
+ /* Insert before */
+ BUG_ON(newext->ee_block == nearex->ee_block);
+ ext_debug("insert %u:%llu:[%d]%d after: "
+ "nearest %p\n",
+ le32_to_cpu(newext->ee_block),
+ ext4_ext_pblock(newext),
+ ext4_ext_is_uninitialized(newext),
+ ext4_ext_get_actual_len(newext),
+ nearex);
}
- path[depth].p_ext = nearex + 1;
- } else {
- BUG_ON(newext->ee_block == nearex->ee_block);
- len = (EXT_MAX_EXTENT(eh) - nearex) * sizeof(struct ext4_extent);
- len = len < 0 ? 0 : len;
- ext_debug("insert %d:%llu:[%d]%d before: nearest 0x%p, "
- "move %d from 0x%p to 0x%p\n",
- le32_to_cpu(newext->ee_block),
- ext4_ext_pblock(newext),
- ext4_ext_is_uninitialized(newext),
- ext4_ext_get_actual_len(newext),
- nearex, len, nearex, nearex + 1);
- memmove(nearex + 1, nearex, len);
- path[depth].p_ext = nearex;
+ len = EXT_LAST_EXTENT(eh) - nearex + 1;
+ if (len > 0) {
+ ext_debug("insert %u:%llu:[%d]%d: "
+ "move %d extents from 0x%p to 0x%p\n",
+ le32_to_cpu(newext->ee_block),
+ ext4_ext_pblock(newext),
+ ext4_ext_is_uninitialized(newext),
+ ext4_ext_get_actual_len(newext),
+ len, nearex, nearex + 1);
+ memmove(nearex + 1, nearex,
+ len * sizeof(struct ext4_extent));
+ }
}
le16_add_cpu(&eh->eh_entries, 1);
- nearex = path[depth].p_ext;
+ path[depth].p_ext = nearex;
nearex->ee_block = newext->ee_block;
ext4_ext_store_pblock(nearex, ext4_ext_pblock(newext));
nearex->ee_len = newext->ee_len;
@@ -1962,6 +1952,7 @@
struct ext4_ext_cache *cex;
BUG_ON(len == 0);
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+ trace_ext4_ext_put_in_cache(inode, block, len, start);
cex = &EXT4_I(inode)->i_cached_extent;
cex->ec_block = block;
cex->ec_len = len;
@@ -2063,6 +2054,7 @@
sbi->extent_cache_misses++;
else
sbi->extent_cache_hits++;
+ trace_ext4_ext_in_cache(inode, block, ret);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
return ret;
}
@@ -2130,6 +2122,8 @@
if (err)
return err;
ext_debug("index is empty, remove it, free block %llu\n", leaf);
+ trace_ext4_ext_rm_idx(inode, leaf);
+
ext4_free_blocks(handle, inode, NULL, leaf, 1,
EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
return err;
@@ -2158,7 +2152,7 @@
* need to account for leaf block credit
*
* bitmaps and block group descriptor blocks
- * and other metadat blocks still need to be
+ * and other metadata blocks still need to be
* accounted.
*/
/* 1 bitmap, 1 block group descriptor */
@@ -2195,14 +2189,40 @@
}
static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
- struct ext4_extent *ex,
- ext4_lblk_t from, ext4_lblk_t to)
+ struct ext4_extent *ex,
+ ext4_fsblk_t *partial_cluster,
+ ext4_lblk_t from, ext4_lblk_t to)
{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
unsigned short ee_len = ext4_ext_get_actual_len(ex);
+ ext4_fsblk_t pblk;
int flags = EXT4_FREE_BLOCKS_FORGET;
if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
flags |= EXT4_FREE_BLOCKS_METADATA;
+ /*
+ * For bigalloc file systems, we never free a partial cluster
+ * at the beginning of the extent. Instead, we make a note
+ * that we tried freeing the cluster, and check to see if we
+ * need to free it on a subsequent call to ext4_remove_blocks,
+ * or at the end of the ext4_truncate() operation.
+ */
+ flags |= EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER;
+
+ trace_ext4_remove_blocks(inode, ex, from, to, *partial_cluster);
+ /*
+ * If we have a partial cluster, and it's different from the
+ * cluster of the last block, we need to explicitly free the
+ * partial cluster here.
+ */
+ pblk = ext4_ext_pblock(ex) + ee_len - 1;
+ if (*partial_cluster && (EXT4_B2C(sbi, pblk) != *partial_cluster)) {
+ ext4_free_blocks(handle, inode, NULL,
+ EXT4_C2B(sbi, *partial_cluster),
+ sbi->s_cluster_ratio, flags);
+ *partial_cluster = 0;
+ }
+
#ifdef EXTENTS_STATS
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
@@ -2222,12 +2242,24 @@
&& to == le32_to_cpu(ex->ee_block) + ee_len - 1) {
/* tail removal */
ext4_lblk_t num;
- ext4_fsblk_t start;
num = le32_to_cpu(ex->ee_block) + ee_len - from;
- start = ext4_ext_pblock(ex) + ee_len - num;
- ext_debug("free last %u blocks starting %llu\n", num, start);
- ext4_free_blocks(handle, inode, NULL, start, num, flags);
+ pblk = ext4_ext_pblock(ex) + ee_len - num;
+ ext_debug("free last %u blocks starting %llu\n", num, pblk);
+ ext4_free_blocks(handle, inode, NULL, pblk, num, flags);
+ /*
+ * If the block range to be freed didn't start at the
+ * beginning of a cluster, and we removed the entire
+ * extent, save the partial cluster here, since we
+ * might need to delete if we determine that the
+ * truncate operation has removed all of the blocks in
+ * the cluster.
+ */
+ if (pblk & (sbi->s_cluster_ratio - 1) &&
+ (ee_len == num))
+ *partial_cluster = EXT4_B2C(sbi, pblk);
+ else
+ *partial_cluster = 0;
} else if (from == le32_to_cpu(ex->ee_block)
&& to <= le32_to_cpu(ex->ee_block) + ee_len - 1) {
/* head removal */
@@ -2238,7 +2270,7 @@
start = ext4_ext_pblock(ex);
ext_debug("free first %u blocks starting %llu\n", num, start);
- ext4_free_blocks(handle, inode, 0, start, num, flags);
+ ext4_free_blocks(handle, inode, NULL, start, num, flags);
} else {
printk(KERN_INFO "strange request: removal(2) "
@@ -2262,19 +2294,19 @@
*/
static int
ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
- struct ext4_ext_path *path, ext4_lblk_t start,
- ext4_lblk_t end)
+ struct ext4_ext_path *path, ext4_fsblk_t *partial_cluster,
+ ext4_lblk_t start, ext4_lblk_t end)
{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int err = 0, correct_index = 0;
int depth = ext_depth(inode), credits;
struct ext4_extent_header *eh;
- ext4_lblk_t a, b, block;
+ ext4_lblk_t a, b;
unsigned num;
ext4_lblk_t ex_ee_block;
unsigned short ex_ee_len;
unsigned uninitialized = 0;
struct ext4_extent *ex;
- struct ext4_map_blocks map;
/* the header must be checked already in ext4_ext_remove_space() */
ext_debug("truncate since %u in leaf\n", start);
@@ -2291,6 +2323,8 @@
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
+ trace_ext4_ext_rm_leaf(inode, start, ex, *partial_cluster);
+
while (ex >= EXT_FIRST_EXTENT(eh) &&
ex_ee_block + ex_ee_len > start) {
@@ -2315,86 +2349,18 @@
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
continue;
- } else if (a != ex_ee_block &&
- b != ex_ee_block + ex_ee_len - 1) {
- /*
- * If this is a truncate, then this condition should
- * never happen because at least one of the end points
- * needs to be on the edge of the extent.
- */
- if (end == EXT_MAX_BLOCKS - 1) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- block = 0;
- num = 0;
- err = -EIO;
- goto out;
- }
- /*
- * else this is a hole punch, so the extent needs to
- * be split since neither edge of the hole is on the
- * extent edge
- */
- else{
- map.m_pblk = ext4_ext_pblock(ex);
- map.m_lblk = ex_ee_block;
- map.m_len = b - ex_ee_block;
-
- err = ext4_split_extent(handle,
- inode, path, &map, 0,
- EXT4_GET_BLOCKS_PUNCH_OUT_EXT |
- EXT4_GET_BLOCKS_PRE_IO);
-
- if (err < 0)
- goto out;
-
- ex_ee_len = ext4_ext_get_actual_len(ex);
-
- b = ex_ee_block+ex_ee_len - 1 < end ?
- ex_ee_block+ex_ee_len - 1 : end;
-
- /* Then remove tail of this extent */
- block = ex_ee_block;
- num = a - block;
- }
+ } else if (b != ex_ee_block + ex_ee_len - 1) {
+ EXT4_ERROR_INODE(inode," bad truncate %u:%u\n",
+ start, end);
+ err = -EIO;
+ goto out;
} else if (a != ex_ee_block) {
/* remove tail of the extent */
- block = ex_ee_block;
- num = a - block;
- } else if (b != ex_ee_block + ex_ee_len - 1) {
- /* remove head of the extent */
- block = b;
- num = ex_ee_block + ex_ee_len - b;
-
- /*
- * If this is a truncate, this condition
- * should never happen
- */
- if (end == EXT_MAX_BLOCKS - 1) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- err = -EIO;
- goto out;
- }
+ num = a - ex_ee_block;
} else {
/* remove whole extent: excellent! */
- block = ex_ee_block;
num = 0;
- if (a != ex_ee_block) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- err = -EIO;
- goto out;
- }
-
- if (b != ex_ee_block + ex_ee_len - 1) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- err = -EIO;
- goto out;
- }
}
-
/*
* 3 for leaf, sb, and inode plus 2 (bmap and group
* descriptor) for each block group; assume two block
@@ -2416,23 +2382,15 @@
if (err)
goto out;
- err = ext4_remove_blocks(handle, inode, ex, a, b);
+ err = ext4_remove_blocks(handle, inode, ex, partial_cluster,
+ a, b);
if (err)
goto out;
- if (num == 0) {
+ if (num == 0)
/* this extent is removed; mark slot entirely unused */
ext4_ext_store_pblock(ex, 0);
- } else if (block != ex_ee_block) {
- /*
- * If this was a head removal, then we need to update
- * the physical block since it is now at a different
- * location
- */
- ext4_ext_store_pblock(ex, ext4_ext_pblock(ex) + (b-a));
- }
- ex->ee_block = cpu_to_le32(block);
ex->ee_len = cpu_to_le16(num);
/*
* Do not mark uninitialized if all the blocks in the
@@ -2440,11 +2398,6 @@
*/
if (uninitialized && num)
ext4_ext_mark_uninitialized(ex);
-
- err = ext4_ext_dirty(handle, inode, path + depth);
- if (err)
- goto out;
-
/*
* If the extent was completely released,
* we need to remove it from the leaf
@@ -2464,9 +2417,14 @@
sizeof(struct ext4_extent));
}
le16_add_cpu(&eh->eh_entries, -1);
- }
+ } else
+ *partial_cluster = 0;
- ext_debug("new extent: %u:%u:%llu\n", block, num,
+ err = ext4_ext_dirty(handle, inode, path + depth);
+ if (err)
+ goto out;
+
+ ext_debug("new extent: %u:%u:%llu\n", ex_ee_block, num,
ext4_ext_pblock(ex));
ex--;
ex_ee_block = le32_to_cpu(ex->ee_block);
@@ -2476,6 +2434,25 @@
if (correct_index && eh->eh_entries)
err = ext4_ext_correct_indexes(handle, inode, path);
+ /*
+ * If there is still a entry in the leaf node, check to see if
+ * it references the partial cluster. This is the only place
+ * where it could; if it doesn't, we can free the cluster.
+ */
+ if (*partial_cluster && ex >= EXT_FIRST_EXTENT(eh) &&
+ (EXT4_B2C(sbi, ext4_ext_pblock(ex) + ex_ee_len - 1) !=
+ *partial_cluster)) {
+ int flags = EXT4_FREE_BLOCKS_FORGET;
+
+ if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
+ flags |= EXT4_FREE_BLOCKS_METADATA;
+
+ ext4_free_blocks(handle, inode, NULL,
+ EXT4_C2B(sbi, *partial_cluster),
+ sbi->s_cluster_ratio, flags);
+ *partial_cluster = 0;
+ }
+
/* if this leaf is free, then we should
* remove it from index block above */
if (err == 0 && eh->eh_entries == 0 && path[depth].p_bh != NULL)
@@ -2511,6 +2488,7 @@
struct super_block *sb = inode->i_sb;
int depth = ext_depth(inode);
struct ext4_ext_path *path;
+ ext4_fsblk_t partial_cluster = 0;
handle_t *handle;
int i, err;
@@ -2524,6 +2502,8 @@
again:
ext4_ext_invalidate_cache(inode);
+ trace_ext4_ext_remove_space(inode, start, depth);
+
/*
* We start scanning from right side, freeing all the blocks
* after i_size and walking into the tree depth-wise.
@@ -2546,7 +2526,8 @@
if (i == depth) {
/* this is leaf block */
err = ext4_ext_rm_leaf(handle, inode, path,
- start, EXT_MAX_BLOCKS - 1);
+ &partial_cluster, start,
+ EXT_MAX_BLOCKS - 1);
/* root level has p_bh == NULL, brelse() eats this */
brelse(path[i].p_bh);
path[i].p_bh = NULL;
@@ -2618,6 +2599,24 @@
}
}
+ trace_ext4_ext_remove_space_done(inode, start, depth, partial_cluster,
+ path->p_hdr->eh_entries);
+
+ /* If we still have something in the partial cluster and we have removed
+ * even the first extent, then we should free the blocks in the partial
+ * cluster as well. */
+ if (partial_cluster && path->p_hdr->eh_entries == 0) {
+ int flags = EXT4_FREE_BLOCKS_FORGET;
+
+ if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
+ flags |= EXT4_FREE_BLOCKS_METADATA;
+
+ ext4_free_blocks(handle, inode, NULL,
+ EXT4_C2B(EXT4_SB(sb), partial_cluster),
+ EXT4_SB(sb)->s_cluster_ratio, flags);
+ partial_cluster = 0;
+ }
+
/* TODO: flexible tree reduction should be here */
if (path->p_hdr->eh_entries == 0) {
/*
@@ -2909,17 +2908,29 @@
* a> There is no split required: Entire extent should be initialized
* b> Splits in two extents: Write is happening at either end of the extent
* c> Splits in three extents: Somone is writing in middle of the extent
+ *
+ * Pre-conditions:
+ * - The extent pointed to by 'path' is uninitialized.
+ * - The extent pointed to by 'path' contains a superset
+ * of the logical span [map->m_lblk, map->m_lblk + map->m_len).
+ *
+ * Post-conditions on success:
+ * - the returned value is the number of blocks beyond map->l_lblk
+ * that are allocated and initialized.
+ * It is guaranteed to be >= map->m_len.
*/
static int ext4_ext_convert_to_initialized(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
struct ext4_ext_path *path)
{
+ struct ext4_extent_header *eh;
struct ext4_map_blocks split_map;
struct ext4_extent zero_ex;
struct ext4_extent *ex;
ext4_lblk_t ee_block, eof_block;
- unsigned int allocated, ee_len, depth;
+ unsigned int ee_len, depth;
+ int allocated;
int err = 0;
int split_flag = 0;
@@ -2933,11 +2944,93 @@
eof_block = map->m_lblk + map->m_len;
depth = ext_depth(inode);
+ eh = path[depth].p_hdr;
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
allocated = ee_len - (map->m_lblk - ee_block);
+ trace_ext4_ext_convert_to_initialized_enter(inode, map, ex);
+
+ /* Pre-conditions */
+ BUG_ON(!ext4_ext_is_uninitialized(ex));
+ BUG_ON(!in_range(map->m_lblk, ee_block, ee_len));
+ BUG_ON(map->m_lblk + map->m_len > ee_block + ee_len);
+
+ /*
+ * Attempt to transfer newly initialized blocks from the currently
+ * uninitialized extent to its left neighbor. This is much cheaper
+ * than an insertion followed by a merge as those involve costly
+ * memmove() calls. This is the common case in steady state for
+ * workloads doing fallocate(FALLOC_FL_KEEP_SIZE) followed by append
+ * writes.
+ *
+ * Limitations of the current logic:
+ * - L1: we only deal with writes at the start of the extent.
+ * The approach could be extended to writes at the end
+ * of the extent but this scenario was deemed less common.
+ * - L2: we do not deal with writes covering the whole extent.
+ * This would require removing the extent if the transfer
+ * is possible.
+ * - L3: we only attempt to merge with an extent stored in the
+ * same extent tree node.
+ */
+ if ((map->m_lblk == ee_block) && /*L1*/
+ (map->m_len < ee_len) && /*L2*/
+ (ex > EXT_FIRST_EXTENT(eh))) { /*L3*/
+ struct ext4_extent *prev_ex;
+ ext4_lblk_t prev_lblk;
+ ext4_fsblk_t prev_pblk, ee_pblk;
+ unsigned int prev_len, write_len;
+
+ prev_ex = ex - 1;
+ prev_lblk = le32_to_cpu(prev_ex->ee_block);
+ prev_len = ext4_ext_get_actual_len(prev_ex);
+ prev_pblk = ext4_ext_pblock(prev_ex);
+ ee_pblk = ext4_ext_pblock(ex);
+ write_len = map->m_len;
+
+ /*
+ * A transfer of blocks from 'ex' to 'prev_ex' is allowed
+ * upon those conditions:
+ * - C1: prev_ex is initialized,
+ * - C2: prev_ex is logically abutting ex,
+ * - C3: prev_ex is physically abutting ex,
+ * - C4: prev_ex can receive the additional blocks without
+ * overflowing the (initialized) length limit.
+ */
+ if ((!ext4_ext_is_uninitialized(prev_ex)) && /*C1*/
+ ((prev_lblk + prev_len) == ee_block) && /*C2*/
+ ((prev_pblk + prev_len) == ee_pblk) && /*C3*/
+ (prev_len < (EXT_INIT_MAX_LEN - write_len))) { /*C4*/
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
+
+ trace_ext4_ext_convert_to_initialized_fastpath(inode,
+ map, ex, prev_ex);
+
+ /* Shift the start of ex by 'write_len' blocks */
+ ex->ee_block = cpu_to_le32(ee_block + write_len);
+ ext4_ext_store_pblock(ex, ee_pblk + write_len);
+ ex->ee_len = cpu_to_le16(ee_len - write_len);
+ ext4_ext_mark_uninitialized(ex); /* Restore the flag */
+
+ /* Extend prev_ex by 'write_len' blocks */
+ prev_ex->ee_len = cpu_to_le16(prev_len + write_len);
+
+ /* Mark the block containing both extents as dirty */
+ ext4_ext_dirty(handle, inode, path + depth);
+
+ /* Update path to point to the right extent */
+ path[depth].p_ext = prev_ex;
+
+ /* Result: number of initialized blocks past m_lblk */
+ allocated = write_len;
+ goto out;
+ }
+ }
+
WARN_ON(map->m_lblk < ee_block);
/*
* It is safe to convert extent to initialized via explicit
@@ -3165,6 +3258,192 @@
return ext4_mark_inode_dirty(handle, inode);
}
+/**
+ * ext4_find_delalloc_range: find delayed allocated block in the given range.
+ *
+ * Goes through the buffer heads in the range [lblk_start, lblk_end] and returns
+ * whether there are any buffers marked for delayed allocation. It returns '1'
+ * on the first delalloc'ed buffer head found. If no buffer head in the given
+ * range is marked for delalloc, it returns 0.
+ * lblk_start should always be <= lblk_end.
+ * search_hint_reverse is to indicate that searching in reverse from lblk_end to
+ * lblk_start might be more efficient (i.e., we will likely hit the delalloc'ed
+ * block sooner). This is useful when blocks are truncated sequentially from
+ * lblk_start towards lblk_end.
+ */
+static int ext4_find_delalloc_range(struct inode *inode,
+ ext4_lblk_t lblk_start,
+ ext4_lblk_t lblk_end,
+ int search_hint_reverse)
+{
+ struct address_space *mapping = inode->i_mapping;
+ struct buffer_head *head, *bh = NULL;
+ struct page *page;
+ ext4_lblk_t i, pg_lblk;
+ pgoff_t index;
+
+ /* reverse search wont work if fs block size is less than page size */
+ if (inode->i_blkbits < PAGE_CACHE_SHIFT)
+ search_hint_reverse = 0;
+
+ if (search_hint_reverse)
+ i = lblk_end;
+ else
+ i = lblk_start;
+
+ index = i >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
+
+ while ((i >= lblk_start) && (i <= lblk_end)) {
+ page = find_get_page(mapping, index);
+ if (!page)
+ goto nextpage;
+
+ if (!page_has_buffers(page))
+ goto nextpage;
+
+ head = page_buffers(page);
+ if (!head)
+ goto nextpage;
+
+ bh = head;
+ pg_lblk = index << (PAGE_CACHE_SHIFT -
+ inode->i_blkbits);
+ do {
+ if (unlikely(pg_lblk < lblk_start)) {
+ /*
+ * This is possible when fs block size is less
+ * than page size and our cluster starts/ends in
+ * middle of the page. So we need to skip the
+ * initial few blocks till we reach the 'lblk'
+ */
+ pg_lblk++;
+ continue;
+ }
+
+ /* Check if the buffer is delayed allocated and that it
+ * is not yet mapped. (when da-buffers are mapped during
+ * their writeout, their da_mapped bit is set.)
+ */
+ if (buffer_delay(bh) && !buffer_da_mapped(bh)) {
+ page_cache_release(page);
+ trace_ext4_find_delalloc_range(inode,
+ lblk_start, lblk_end,
+ search_hint_reverse,
+ 1, i);
+ return 1;
+ }
+ if (search_hint_reverse)
+ i--;
+ else
+ i++;
+ } while ((i >= lblk_start) && (i <= lblk_end) &&
+ ((bh = bh->b_this_page) != head));
+nextpage:
+ if (page)
+ page_cache_release(page);
+ /*
+ * Move to next page. 'i' will be the first lblk in the next
+ * page.
+ */
+ if (search_hint_reverse)
+ index--;
+ else
+ index++;
+ i = index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
+ }
+
+ trace_ext4_find_delalloc_range(inode, lblk_start, lblk_end,
+ search_hint_reverse, 0, 0);
+ return 0;
+}
+
+int ext4_find_delalloc_cluster(struct inode *inode, ext4_lblk_t lblk,
+ int search_hint_reverse)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ ext4_lblk_t lblk_start, lblk_end;
+ lblk_start = lblk & (~(sbi->s_cluster_ratio - 1));
+ lblk_end = lblk_start + sbi->s_cluster_ratio - 1;
+
+ return ext4_find_delalloc_range(inode, lblk_start, lblk_end,
+ search_hint_reverse);
+}
+
+/**
+ * Determines how many complete clusters (out of those specified by the 'map')
+ * are under delalloc and were reserved quota for.
+ * This function is called when we are writing out the blocks that were
+ * originally written with their allocation delayed, but then the space was
+ * allocated using fallocate() before the delayed allocation could be resolved.
+ * The cases to look for are:
+ * ('=' indicated delayed allocated blocks
+ * '-' indicates non-delayed allocated blocks)
+ * (a) partial clusters towards beginning and/or end outside of allocated range
+ * are not delalloc'ed.
+ * Ex:
+ * |----c---=|====c====|====c====|===-c----|
+ * |++++++ allocated ++++++|
+ * ==> 4 complete clusters in above example
+ *
+ * (b) partial cluster (outside of allocated range) towards either end is
+ * marked for delayed allocation. In this case, we will exclude that
+ * cluster.
+ * Ex:
+ * |----====c========|========c========|
+ * |++++++ allocated ++++++|
+ * ==> 1 complete clusters in above example
+ *
+ * Ex:
+ * |================c================|
+ * |++++++ allocated ++++++|
+ * ==> 0 complete clusters in above example
+ *
+ * The ext4_da_update_reserve_space will be called only if we
+ * determine here that there were some "entire" clusters that span
+ * this 'allocated' range.
+ * In the non-bigalloc case, this function will just end up returning num_blks
+ * without ever calling ext4_find_delalloc_range.
+ */
+static unsigned int
+get_reserved_cluster_alloc(struct inode *inode, ext4_lblk_t lblk_start,
+ unsigned int num_blks)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ ext4_lblk_t alloc_cluster_start, alloc_cluster_end;
+ ext4_lblk_t lblk_from, lblk_to, c_offset;
+ unsigned int allocated_clusters = 0;
+
+ alloc_cluster_start = EXT4_B2C(sbi, lblk_start);
+ alloc_cluster_end = EXT4_B2C(sbi, lblk_start + num_blks - 1);
+
+ /* max possible clusters for this allocation */
+ allocated_clusters = alloc_cluster_end - alloc_cluster_start + 1;
+
+ trace_ext4_get_reserved_cluster_alloc(inode, lblk_start, num_blks);
+
+ /* Check towards left side */
+ c_offset = lblk_start & (sbi->s_cluster_ratio - 1);
+ if (c_offset) {
+ lblk_from = lblk_start & (~(sbi->s_cluster_ratio - 1));
+ lblk_to = lblk_from + c_offset - 1;
+
+ if (ext4_find_delalloc_range(inode, lblk_from, lblk_to, 0))
+ allocated_clusters--;
+ }
+
+ /* Now check towards right. */
+ c_offset = (lblk_start + num_blks) & (sbi->s_cluster_ratio - 1);
+ if (allocated_clusters && c_offset) {
+ lblk_from = lblk_start + num_blks;
+ lblk_to = lblk_from + (sbi->s_cluster_ratio - c_offset) - 1;
+
+ if (ext4_find_delalloc_range(inode, lblk_from, lblk_to, 0))
+ allocated_clusters--;
+ }
+
+ return allocated_clusters;
+}
+
static int
ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map,
@@ -3181,6 +3460,9 @@
flags, allocated);
ext4_ext_show_leaf(inode, path);
+ trace_ext4_ext_handle_uninitialized_extents(inode, map, allocated,
+ newblock);
+
/* get_block() before submit the IO, split the extent */
if ((flags & EXT4_GET_BLOCKS_PRE_IO)) {
ret = ext4_split_unwritten_extents(handle, inode, map,
@@ -3190,10 +3472,9 @@
* that this IO needs to conversion to written when IO is
* completed
*/
- if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
- io->flag = EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- } else
+ if (io)
+ ext4_set_io_unwritten_flag(inode, io);
+ else
ext4_set_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN);
if (ext4_should_dioread_nolock(inode))
map->m_flags |= EXT4_MAP_UNINIT;
@@ -3234,14 +3515,8 @@
/* buffered write, writepage time, convert*/
ret = ext4_ext_convert_to_initialized(handle, inode, map, path);
- if (ret >= 0) {
+ if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
- err = check_eofblocks_fl(handle, inode, map->m_lblk, path,
- map->m_len);
- if (err < 0)
- goto out2;
- }
-
out:
if (ret <= 0) {
err = ret;
@@ -3270,11 +3545,24 @@
* But fallocate would have already updated quota and block
* count for this offset. So cancel these reservation
*/
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
- ext4_da_update_reserve_space(inode, allocated, 0);
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
+ unsigned int reserved_clusters;
+ reserved_clusters = get_reserved_cluster_alloc(inode,
+ map->m_lblk, map->m_len);
+ if (reserved_clusters)
+ ext4_da_update_reserve_space(inode,
+ reserved_clusters,
+ 0);
+ }
map_out:
map->m_flags |= EXT4_MAP_MAPPED;
+ if ((flags & EXT4_GET_BLOCKS_KEEP_SIZE) == 0) {
+ err = check_eofblocks_fl(handle, inode, map->m_lblk, path,
+ map->m_len);
+ if (err < 0)
+ goto out2;
+ }
out1:
if (allocated > map->m_len)
allocated = map->m_len;
@@ -3290,6 +3578,111 @@
}
/*
+ * get_implied_cluster_alloc - check to see if the requested
+ * allocation (in the map structure) overlaps with a cluster already
+ * allocated in an extent.
+ * @sb The filesystem superblock structure
+ * @map The requested lblk->pblk mapping
+ * @ex The extent structure which might contain an implied
+ * cluster allocation
+ *
+ * This function is called by ext4_ext_map_blocks() after we failed to
+ * find blocks that were already in the inode's extent tree. Hence,
+ * we know that the beginning of the requested region cannot overlap
+ * the extent from the inode's extent tree. There are three cases we
+ * want to catch. The first is this case:
+ *
+ * |--- cluster # N--|
+ * |--- extent ---| |---- requested region ---|
+ * |==========|
+ *
+ * The second case that we need to test for is this one:
+ *
+ * |--------- cluster # N ----------------|
+ * |--- requested region --| |------- extent ----|
+ * |=======================|
+ *
+ * The third case is when the requested region lies between two extents
+ * within the same cluster:
+ * |------------- cluster # N-------------|
+ * |----- ex -----| |---- ex_right ----|
+ * |------ requested region ------|
+ * |================|
+ *
+ * In each of the above cases, we need to set the map->m_pblk and
+ * map->m_len so it corresponds to the return the extent labelled as
+ * "|====|" from cluster #N, since it is already in use for data in
+ * cluster EXT4_B2C(sbi, map->m_lblk). We will then return 1 to
+ * signal to ext4_ext_map_blocks() that map->m_pblk should be treated
+ * as a new "allocated" block region. Otherwise, we will return 0 and
+ * ext4_ext_map_blocks() will then allocate one or more new clusters
+ * by calling ext4_mb_new_blocks().
+ */
+static int get_implied_cluster_alloc(struct super_block *sb,
+ struct ext4_map_blocks *map,
+ struct ext4_extent *ex,
+ struct ext4_ext_path *path)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ ext4_lblk_t c_offset = map->m_lblk & (sbi->s_cluster_ratio-1);
+ ext4_lblk_t ex_cluster_start, ex_cluster_end;
+ ext4_lblk_t rr_cluster_start, rr_cluster_end;
+ ext4_lblk_t ee_block = le32_to_cpu(ex->ee_block);
+ ext4_fsblk_t ee_start = ext4_ext_pblock(ex);
+ unsigned short ee_len = ext4_ext_get_actual_len(ex);
+
+ /* The extent passed in that we are trying to match */
+ ex_cluster_start = EXT4_B2C(sbi, ee_block);
+ ex_cluster_end = EXT4_B2C(sbi, ee_block + ee_len - 1);
+
+ /* The requested region passed into ext4_map_blocks() */
+ rr_cluster_start = EXT4_B2C(sbi, map->m_lblk);
+ rr_cluster_end = EXT4_B2C(sbi, map->m_lblk + map->m_len - 1);
+
+ if ((rr_cluster_start == ex_cluster_end) ||
+ (rr_cluster_start == ex_cluster_start)) {
+ if (rr_cluster_start == ex_cluster_end)
+ ee_start += ee_len - 1;
+ map->m_pblk = (ee_start & ~(sbi->s_cluster_ratio - 1)) +
+ c_offset;
+ map->m_len = min(map->m_len,
+ (unsigned) sbi->s_cluster_ratio - c_offset);
+ /*
+ * Check for and handle this case:
+ *
+ * |--------- cluster # N-------------|
+ * |------- extent ----|
+ * |--- requested region ---|
+ * |===========|
+ */
+
+ if (map->m_lblk < ee_block)
+ map->m_len = min(map->m_len, ee_block - map->m_lblk);
+
+ /*
+ * Check for the case where there is already another allocated
+ * block to the right of 'ex' but before the end of the cluster.
+ *
+ * |------------- cluster # N-------------|
+ * |----- ex -----| |---- ex_right ----|
+ * |------ requested region ------|
+ * |================|
+ */
+ if (map->m_lblk > ee_block) {
+ ext4_lblk_t next = ext4_ext_next_allocated_block(path);
+ map->m_len = min(map->m_len, next - map->m_lblk);
+ }
+
+ trace_ext4_get_implied_cluster_alloc_exit(sb, map, 1);
+ return 1;
+ }
+
+ trace_ext4_get_implied_cluster_alloc_exit(sb, map, 0);
+ return 0;
+}
+
+
+/*
* Block allocation/map/preallocation routine for extents based files
*
*
@@ -3311,15 +3704,17 @@
struct ext4_map_blocks *map, int flags)
{
struct ext4_ext_path *path = NULL;
- struct ext4_extent newex, *ex;
+ struct ext4_extent newex, *ex, *ex2;
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
ext4_fsblk_t newblock = 0;
- int err = 0, depth, ret;
- unsigned int allocated = 0;
+ int free_on_err = 0, err = 0, depth, ret;
+ unsigned int allocated = 0, offset = 0;
+ unsigned int allocated_clusters = 0;
unsigned int punched_out = 0;
unsigned int result = 0;
struct ext4_allocation_request ar;
ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
- struct ext4_map_blocks punch_map;
+ ext4_lblk_t cluster_offset;
ext_debug("blocks %u/%u requested for inode %lu\n",
map->m_lblk, map->m_len, inode->i_ino);
@@ -3329,6 +3724,10 @@
if (!(flags & EXT4_GET_BLOCKS_PUNCH_OUT_EXT) &&
ext4_ext_in_cache(inode, map->m_lblk, &newex)) {
if (!newex.ee_start_lo && !newex.ee_start_hi) {
+ if ((sbi->s_cluster_ratio > 1) &&
+ ext4_find_delalloc_cluster(inode, map->m_lblk, 0))
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
/*
* block isn't allocated yet and
@@ -3339,6 +3738,8 @@
/* we should allocate requested block */
} else {
/* block is already allocated */
+ if (sbi->s_cluster_ratio > 1)
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
newblock = map->m_lblk
- le32_to_cpu(newex.ee_block)
+ ext4_ext_pblock(&newex);
@@ -3384,8 +3785,14 @@
* we split out initialized portions during a write.
*/
ee_len = ext4_ext_get_actual_len(ex);
+
+ trace_ext4_ext_show_extent(inode, ee_block, ee_start, ee_len);
+
/* if found extent covers block, simply return it */
if (in_range(map->m_lblk, ee_block, ee_len)) {
+ struct ext4_map_blocks punch_map;
+ ext4_fsblk_t partial_cluster = 0;
+
newblock = map->m_lblk - ee_block + ee_start;
/* number of remaining blocks in the extent */
allocated = ee_len - (map->m_lblk - ee_block);
@@ -3469,7 +3876,8 @@
ext4_ext_invalidate_cache(inode);
err = ext4_ext_rm_leaf(handle, inode, path,
- map->m_lblk, map->m_lblk + punched_out);
+ &partial_cluster, map->m_lblk,
+ map->m_lblk + punched_out);
if (!err && path->p_hdr->eh_entries == 0) {
/*
@@ -3492,6 +3900,10 @@
}
}
+ if ((sbi->s_cluster_ratio > 1) &&
+ ext4_find_delalloc_cluster(inode, map->m_lblk, 0))
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+
/*
* requested block isn't allocated yet;
* we couldn't try to create block if create flag is zero
@@ -3504,9 +3916,25 @@
ext4_ext_put_gap_in_cache(inode, path, map->m_lblk);
goto out2;
}
+
/*
* Okay, we need to do block allocation.
*/
+ map->m_flags &= ~EXT4_MAP_FROM_CLUSTER;
+ newex.ee_block = cpu_to_le32(map->m_lblk);
+ cluster_offset = map->m_lblk & (sbi->s_cluster_ratio-1);
+
+ /*
+ * If we are doing bigalloc, check to see if the extent returned
+ * by ext4_ext_find_extent() implies a cluster we can use.
+ */
+ if (cluster_offset && ex &&
+ get_implied_cluster_alloc(inode->i_sb, map, ex, path)) {
+ ar.len = allocated = map->m_len;
+ newblock = map->m_pblk;
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+ goto got_allocated_blocks;
+ }
/* find neighbour allocated blocks */
ar.lleft = map->m_lblk;
@@ -3514,10 +3942,21 @@
if (err)
goto out2;
ar.lright = map->m_lblk;
- err = ext4_ext_search_right(inode, path, &ar.lright, &ar.pright);
+ ex2 = NULL;
+ err = ext4_ext_search_right(inode, path, &ar.lright, &ar.pright, &ex2);
if (err)
goto out2;
+ /* Check if the extent after searching to the right implies a
+ * cluster we can use. */
+ if ((sbi->s_cluster_ratio > 1) && ex2 &&
+ get_implied_cluster_alloc(inode->i_sb, map, ex2, path)) {
+ ar.len = allocated = map->m_len;
+ newblock = map->m_pblk;
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+ goto got_allocated_blocks;
+ }
+
/*
* See if request is beyond maximum number of blocks we can have in
* a single extent. For an initialized extent this limit is
@@ -3532,9 +3971,8 @@
map->m_len = EXT_UNINIT_MAX_LEN;
/* Check if we can really insert (m_lblk)::(m_lblk + m_len) extent */
- newex.ee_block = cpu_to_le32(map->m_lblk);
newex.ee_len = cpu_to_le16(map->m_len);
- err = ext4_ext_check_overlap(inode, &newex, path);
+ err = ext4_ext_check_overlap(sbi, inode, &newex, path);
if (err)
allocated = ext4_ext_get_actual_len(&newex);
else
@@ -3544,7 +3982,18 @@
ar.inode = inode;
ar.goal = ext4_ext_find_goal(inode, path, map->m_lblk);
ar.logical = map->m_lblk;
- ar.len = allocated;
+ /*
+ * We calculate the offset from the beginning of the cluster
+ * for the logical block number, since when we allocate a
+ * physical cluster, the physical block should start at the
+ * same offset from the beginning of the cluster. This is
+ * needed so that future calls to get_implied_cluster_alloc()
+ * work correctly.
+ */
+ offset = map->m_lblk & (sbi->s_cluster_ratio - 1);
+ ar.len = EXT4_NUM_B2C(sbi, offset+allocated);
+ ar.goal -= offset;
+ ar.logical -= offset;
if (S_ISREG(inode->i_mode))
ar.flags = EXT4_MB_HINT_DATA;
else
@@ -3557,9 +4006,15 @@
goto out2;
ext_debug("allocate new block: goal %llu, found %llu/%u\n",
ar.goal, newblock, allocated);
+ free_on_err = 1;
+ allocated_clusters = ar.len;
+ ar.len = EXT4_C2B(sbi, ar.len) - offset;
+ if (ar.len > allocated)
+ ar.len = allocated;
+got_allocated_blocks:
/* try to insert new extent into found leaf and return */
- ext4_ext_store_pblock(&newex, newblock);
+ ext4_ext_store_pblock(&newex, newblock + offset);
newex.ee_len = cpu_to_le16(ar.len);
/* Mark uninitialized */
if (flags & EXT4_GET_BLOCKS_UNINIT_EXT){
@@ -3572,10 +4027,9 @@
* that we need to perform conversion when IO is done.
*/
if ((flags & EXT4_GET_BLOCKS_PRE_IO)) {
- if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
- io->flag = EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- } else
+ if (io)
+ ext4_set_io_unwritten_flag(inode, io);
+ else
ext4_set_inode_state(inode,
EXT4_STATE_DIO_UNWRITTEN);
}
@@ -3583,11 +4037,14 @@
map->m_flags |= EXT4_MAP_UNINIT;
}
- err = check_eofblocks_fl(handle, inode, map->m_lblk, path, ar.len);
+ err = 0;
+ if ((flags & EXT4_GET_BLOCKS_KEEP_SIZE) == 0)
+ err = check_eofblocks_fl(handle, inode, map->m_lblk,
+ path, ar.len);
if (!err)
err = ext4_ext_insert_extent(handle, inode, path,
&newex, flags);
- if (err) {
+ if (err && free_on_err) {
int fb_flags = flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE ?
EXT4_FREE_BLOCKS_NO_QUOT_UPDATE : 0;
/* free data blocks we just allocated */
@@ -3610,8 +4067,82 @@
* Update reserved blocks/metadata blocks after successful
* block allocation which had been deferred till now.
*/
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
- ext4_da_update_reserve_space(inode, allocated, 1);
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
+ unsigned int reserved_clusters;
+ /*
+ * Check how many clusters we had reserved this allocated range
+ */
+ reserved_clusters = get_reserved_cluster_alloc(inode,
+ map->m_lblk, allocated);
+ if (map->m_flags & EXT4_MAP_FROM_CLUSTER) {
+ if (reserved_clusters) {
+ /*
+ * We have clusters reserved for this range.
+ * But since we are not doing actual allocation
+ * and are simply using blocks from previously
+ * allocated cluster, we should release the
+ * reservation and not claim quota.
+ */
+ ext4_da_update_reserve_space(inode,
+ reserved_clusters, 0);
+ }
+ } else {
+ BUG_ON(allocated_clusters < reserved_clusters);
+ /* We will claim quota for all newly allocated blocks.*/
+ ext4_da_update_reserve_space(inode, allocated_clusters,
+ 1);
+ if (reserved_clusters < allocated_clusters) {
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ int reservation = allocated_clusters -
+ reserved_clusters;
+ /*
+ * It seems we claimed few clusters outside of
+ * the range of this allocation. We should give
+ * it back to the reservation pool. This can
+ * happen in the following case:
+ *
+ * * Suppose s_cluster_ratio is 4 (i.e., each
+ * cluster has 4 blocks. Thus, the clusters
+ * are [0-3],[4-7],[8-11]...
+ * * First comes delayed allocation write for
+ * logical blocks 10 & 11. Since there were no
+ * previous delayed allocated blocks in the
+ * range [8-11], we would reserve 1 cluster
+ * for this write.
+ * * Next comes write for logical blocks 3 to 8.
+ * In this case, we will reserve 2 clusters
+ * (for [0-3] and [4-7]; and not for [8-11] as
+ * that range has a delayed allocated blocks.
+ * Thus total reserved clusters now becomes 3.
+ * * Now, during the delayed allocation writeout
+ * time, we will first write blocks [3-8] and
+ * allocate 3 clusters for writing these
+ * blocks. Also, we would claim all these
+ * three clusters above.
+ * * Now when we come here to writeout the
+ * blocks [10-11], we would expect to claim
+ * the reservation of 1 cluster we had made
+ * (and we would claim it since there are no
+ * more delayed allocated blocks in the range
+ * [8-11]. But our reserved cluster count had
+ * already gone to 0.
+ *
+ * Thus, at the step 4 above when we determine
+ * that there are still some unwritten delayed
+ * allocated blocks outside of our current
+ * block range, we should increment the
+ * reserved clusters count so that when the
+ * remaining blocks finally gets written, we
+ * could claim them.
+ */
+ dquot_reserve_block(inode,
+ EXT4_C2B(sbi, reservation));
+ spin_lock(&ei->i_block_reservation_lock);
+ ei->i_reserved_data_blocks += reservation;
+ spin_unlock(&ei->i_block_reservation_lock);
+ }
+ }
+ }
/*
* Cache the extent and update transaction to commit on fdatasync only
@@ -3634,12 +4165,12 @@
ext4_ext_drop_refs(path);
kfree(path);
}
- trace_ext4_ext_map_blocks_exit(inode, map->m_lblk,
- newblock, map->m_len, err ? err : allocated);
-
result = (flags & EXT4_GET_BLOCKS_PUNCH_OUT_EXT) ?
punched_out : allocated;
+ trace_ext4_ext_map_blocks_exit(inode, map->m_lblk,
+ newblock, map->m_len, err ? err : result);
+
return err ? err : result;
}
@@ -3649,6 +4180,7 @@
struct super_block *sb = inode->i_sb;
ext4_lblk_t last_block;
handle_t *handle;
+ loff_t page_len;
int err = 0;
/*
@@ -3665,8 +4197,16 @@
if (IS_ERR(handle))
return;
- if (inode->i_size & (sb->s_blocksize - 1))
- ext4_block_truncate_page(handle, mapping, inode->i_size);
+ if (inode->i_size % PAGE_CACHE_SIZE != 0) {
+ page_len = PAGE_CACHE_SIZE -
+ (inode->i_size & (PAGE_CACHE_SIZE - 1));
+
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, inode->i_size, page_len, 0);
+
+ if (err)
+ goto out_stop;
+ }
if (ext4_orphan_add(handle, inode))
goto out_stop;
@@ -3760,6 +4300,7 @@
int ret = 0;
int ret2 = 0;
int retries = 0;
+ int flags;
struct ext4_map_blocks map;
unsigned int credits, blkbits = inode->i_blkbits;
@@ -3796,6 +4337,16 @@
trace_ext4_fallocate_exit(inode, offset, max_blocks, ret);
return ret;
}
+ flags = EXT4_GET_BLOCKS_CREATE_UNINIT_EXT;
+ if (mode & FALLOC_FL_KEEP_SIZE)
+ flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
+ /*
+ * Don't normalize the request if it can fit in one extent so
+ * that it doesn't get unnecessarily split into multiple
+ * extents.
+ */
+ if (len <= EXT_UNINIT_MAX_LEN << blkbits)
+ flags |= EXT4_GET_BLOCKS_NO_NORMALIZE;
retry:
while (ret >= 0 && ret < max_blocks) {
map.m_lblk = map.m_lblk + ret;
@@ -3805,9 +4356,7 @@
ret = PTR_ERR(handle);
break;
}
- ret = ext4_map_blocks(handle, inode, &map,
- EXT4_GET_BLOCKS_CREATE_UNINIT_EXT |
- EXT4_GET_BLOCKS_NO_NORMALIZE);
+ ret = ext4_map_blocks(handle, inode, &map, flags);
if (ret <= 0) {
#ifdef EXT4FS_DEBUG
WARN_ON(ret <= 0);
@@ -4102,7 +4651,6 @@
return EXT_BREAK;
return EXT_CONTINUE;
}
-
/* fiemap flags we can handle specified here */
#define EXT4_FIEMAP_FLAGS (FIEMAP_FLAG_SYNC|FIEMAP_FLAG_XATTR)
@@ -4162,17 +4710,28 @@
struct address_space *mapping = inode->i_mapping;
struct ext4_map_blocks map;
handle_t *handle;
- loff_t first_block_offset, last_block_offset, block_len;
- loff_t first_page, last_page, first_page_offset, last_page_offset;
+ loff_t first_page, last_page, page_len;
+ loff_t first_page_offset, last_page_offset;
int ret, credits, blocks_released, err = 0;
+ /* No need to punch hole beyond i_size */
+ if (offset >= inode->i_size)
+ return 0;
+
+ /*
+ * If the hole extends beyond i_size, set the hole
+ * to end after the page that contains i_size
+ */
+ if (offset + length > inode->i_size) {
+ length = inode->i_size +
+ PAGE_CACHE_SIZE - (inode->i_size & (PAGE_CACHE_SIZE - 1)) -
+ offset;
+ }
+
first_block = (offset + sb->s_blocksize - 1) >>
EXT4_BLOCK_SIZE_BITS(sb);
last_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb);
- first_block_offset = first_block << EXT4_BLOCK_SIZE_BITS(sb);
- last_block_offset = last_block << EXT4_BLOCK_SIZE_BITS(sb);
-
first_page = (offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
last_page = (offset + length) >> PAGE_CACHE_SHIFT;
@@ -4185,11 +4744,10 @@
*/
if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
err = filemap_write_and_wait_range(mapping,
- first_page_offset == 0 ? 0 : first_page_offset-1,
- last_page_offset);
+ offset, offset + length - 1);
- if (err)
- return err;
+ if (err)
+ return err;
}
/* Now release the pages */
@@ -4211,24 +4769,64 @@
goto out;
/*
- * Now we need to zero out the un block aligned data.
- * If the file is smaller than a block, just
- * zero out the middle
+ * Now we need to zero out the non-page-aligned data in the
+ * pages at the start and tail of the hole, and unmap the buffer
+ * heads for the block aligned regions of the page that were
+ * completely zeroed.
*/
- if (first_block > last_block)
- ext4_block_zero_page_range(handle, mapping, offset, length);
- else {
- /* zero out the head of the hole before the first block */
- block_len = first_block_offset - offset;
- if (block_len > 0)
- ext4_block_zero_page_range(handle, mapping,
- offset, block_len);
+ if (first_page > last_page) {
+ /*
+ * If the file space being truncated is contained within a page
+ * just zero out and unmap the middle of that page
+ */
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, offset, length, 0);
- /* zero out the tail of the hole after the last block */
- block_len = offset + length - last_block_offset;
- if (block_len > 0) {
- ext4_block_zero_page_range(handle, mapping,
- last_block_offset, block_len);
+ if (err)
+ goto out;
+ } else {
+ /*
+ * zero out and unmap the partial page that contains
+ * the start of the hole
+ */
+ page_len = first_page_offset - offset;
+ if (page_len > 0) {
+ err = ext4_discard_partial_page_buffers(handle, mapping,
+ offset, page_len, 0);
+ if (err)
+ goto out;
+ }
+
+ /*
+ * zero out and unmap the partial page that contains
+ * the end of the hole
+ */
+ page_len = offset + length - last_page_offset;
+ if (page_len > 0) {
+ err = ext4_discard_partial_page_buffers(handle, mapping,
+ last_page_offset, page_len, 0);
+ if (err)
+ goto out;
+ }
+ }
+
+
+ /*
+ * If i_size is contained in the last page, we need to
+ * unmap and zero the partial page after i_size
+ */
+ if (inode->i_size >> PAGE_CACHE_SHIFT == last_page &&
+ inode->i_size % PAGE_CACHE_SIZE != 0) {
+
+ page_len = PAGE_CACHE_SIZE -
+ (inode->i_size & (PAGE_CACHE_SIZE - 1));
+
+ if (page_len > 0) {
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, inode->i_size, page_len, 0);
+
+ if (err)
+ goto out;
}
}
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index e4095e9..cb70f181 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -181,8 +181,8 @@
path.dentry = mnt->mnt_root;
cp = d_path(&path, buf, sizeof(buf));
if (!IS_ERR(cp)) {
- memcpy(sbi->s_es->s_last_mounted, cp,
- sizeof(sbi->s_es->s_last_mounted));
+ strlcpy(sbi->s_es->s_last_mounted, cp,
+ sizeof(sbi->s_es->s_last_mounted));
ext4_mark_super_dirty(sb);
}
}
@@ -224,53 +224,8 @@
maxbytes = EXT4_SB(inode->i_sb)->s_bitmap_maxbytes;
else
maxbytes = inode->i_sb->s_maxbytes;
- mutex_lock(&inode->i_mutex);
- switch (origin) {
- case SEEK_END:
- offset += inode->i_size;
- break;
- case SEEK_CUR:
- if (offset == 0) {
- mutex_unlock(&inode->i_mutex);
- return file->f_pos;
- }
- offset += file->f_pos;
- break;
- case SEEK_DATA:
- /*
- * In the generic case the entire file is data, so as long as
- * offset isn't at the end of the file then the offset is data.
- */
- if (offset >= inode->i_size) {
- mutex_unlock(&inode->i_mutex);
- return -ENXIO;
- }
- break;
- case SEEK_HOLE:
- /*
- * There is a virtual hole at the end of the file, so as long as
- * offset isn't i_size or larger, return i_size.
- */
- if (offset >= inode->i_size) {
- mutex_unlock(&inode->i_mutex);
- return -ENXIO;
- }
- offset = inode->i_size;
- break;
- }
- if (offset < 0 || offset > maxbytes) {
- mutex_unlock(&inode->i_mutex);
- return -EINVAL;
- }
-
- if (offset != file->f_pos) {
- file->f_pos = offset;
- file->f_version = 0;
- }
- mutex_unlock(&inode->i_mutex);
-
- return offset;
+ return generic_file_llseek_size(file, offset, origin, maxbytes);
}
const struct file_operations ext4_file_operations = {
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 036f78f..00a2cb7 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -75,7 +75,7 @@
* to written.
* The function return the number of pending IOs on success.
*/
-extern int ext4_flush_completed_IO(struct inode *inode)
+int ext4_flush_completed_IO(struct inode *inode)
{
ext4_io_end_t *io;
struct ext4_inode_info *ei = EXT4_I(inode);
@@ -83,14 +83,12 @@
int ret = 0;
int ret2 = 0;
- if (list_empty(&ei->i_completed_io_list))
- return ret;
-
dump_completed_IO(inode);
spin_lock_irqsave(&ei->i_completed_io_lock, flags);
while (!list_empty(&ei->i_completed_io_list)){
io = list_entry(ei->i_completed_io_list.next,
ext4_io_end_t, list);
+ list_del_init(&io->list);
/*
* Calling ext4_end_io_nolock() to convert completed
* IO to written.
@@ -107,11 +105,9 @@
*/
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
ret = ext4_end_io_nolock(io);
- spin_lock_irqsave(&ei->i_completed_io_lock, flags);
if (ret < 0)
ret2 = ret;
- else
- list_del_init(&io->list);
+ spin_lock_irqsave(&ei->i_completed_io_lock, flags);
}
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
return (ret2 < 0) ? ret2 : 0;
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 9c63f27..00beb4f 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -78,7 +78,7 @@
* allocation, essentially implementing a per-group read-only flag. */
if (!ext4_group_desc_csum_verify(sbi, block_group, gdp)) {
ext4_error(sb, "Checksum bad for group %u", block_group);
- ext4_free_blks_set(sb, gdp, 0);
+ ext4_free_group_clusters_set(sb, gdp, 0);
ext4_free_inodes_set(sb, gdp, 0);
ext4_itable_unused_set(sb, gdp, 0);
memset(bh->b_data, 0xff, sb->s_blocksize);
@@ -293,121 +293,9 @@
ext4_std_error(sb, fatal);
}
-/*
- * There are two policies for allocating an inode. If the new inode is
- * a directory, then a forward search is made for a block group with both
- * free space and a low directory-to-inode ratio; if that fails, then of
- * the groups with above-average free space, that group with the fewest
- * directories already is chosen.
- *
- * For other inodes, search forward from the parent directory\'s block
- * group to find a free inode.
- */
-static int find_group_dir(struct super_block *sb, struct inode *parent,
- ext4_group_t *best_group)
-{
- ext4_group_t ngroups = ext4_get_groups_count(sb);
- unsigned int freei, avefreei;
- struct ext4_group_desc *desc, *best_desc = NULL;
- ext4_group_t group;
- int ret = -1;
-
- freei = percpu_counter_read_positive(&EXT4_SB(sb)->s_freeinodes_counter);
- avefreei = freei / ngroups;
-
- for (group = 0; group < ngroups; group++) {
- desc = ext4_get_group_desc(sb, group, NULL);
- if (!desc || !ext4_free_inodes_count(sb, desc))
- continue;
- if (ext4_free_inodes_count(sb, desc) < avefreei)
- continue;
- if (!best_desc ||
- (ext4_free_blks_count(sb, desc) >
- ext4_free_blks_count(sb, best_desc))) {
- *best_group = group;
- best_desc = desc;
- ret = 0;
- }
- }
- return ret;
-}
-
-#define free_block_ratio 10
-
-static int find_group_flex(struct super_block *sb, struct inode *parent,
- ext4_group_t *best_group)
-{
- struct ext4_sb_info *sbi = EXT4_SB(sb);
- struct ext4_group_desc *desc;
- struct flex_groups *flex_group = sbi->s_flex_groups;
- ext4_group_t parent_group = EXT4_I(parent)->i_block_group;
- ext4_group_t parent_fbg_group = ext4_flex_group(sbi, parent_group);
- ext4_group_t ngroups = ext4_get_groups_count(sb);
- int flex_size = ext4_flex_bg_size(sbi);
- ext4_group_t best_flex = parent_fbg_group;
- int blocks_per_flex = sbi->s_blocks_per_group * flex_size;
- int flexbg_free_blocks;
- int flex_freeb_ratio;
- ext4_group_t n_fbg_groups;
- ext4_group_t i;
-
- n_fbg_groups = (ngroups + flex_size - 1) >>
- sbi->s_log_groups_per_flex;
-
-find_close_to_parent:
- flexbg_free_blocks = atomic_read(&flex_group[best_flex].free_blocks);
- flex_freeb_ratio = flexbg_free_blocks * 100 / blocks_per_flex;
- if (atomic_read(&flex_group[best_flex].free_inodes) &&
- flex_freeb_ratio > free_block_ratio)
- goto found_flexbg;
-
- if (best_flex && best_flex == parent_fbg_group) {
- best_flex--;
- goto find_close_to_parent;
- }
-
- for (i = 0; i < n_fbg_groups; i++) {
- if (i == parent_fbg_group || i == parent_fbg_group - 1)
- continue;
-
- flexbg_free_blocks = atomic_read(&flex_group[i].free_blocks);
- flex_freeb_ratio = flexbg_free_blocks * 100 / blocks_per_flex;
-
- if (flex_freeb_ratio > free_block_ratio &&
- (atomic_read(&flex_group[i].free_inodes))) {
- best_flex = i;
- goto found_flexbg;
- }
-
- if ((atomic_read(&flex_group[best_flex].free_inodes) == 0) ||
- ((atomic_read(&flex_group[i].free_blocks) >
- atomic_read(&flex_group[best_flex].free_blocks)) &&
- atomic_read(&flex_group[i].free_inodes)))
- best_flex = i;
- }
-
- if (!atomic_read(&flex_group[best_flex].free_inodes) ||
- !atomic_read(&flex_group[best_flex].free_blocks))
- return -1;
-
-found_flexbg:
- for (i = best_flex * flex_size; i < ngroups &&
- i < (best_flex + 1) * flex_size; i++) {
- desc = ext4_get_group_desc(sb, i, NULL);
- if (ext4_free_inodes_count(sb, desc)) {
- *best_group = i;
- goto out;
- }
- }
-
- return -1;
-out:
- return 0;
-}
-
struct orlov_stats {
__u32 free_inodes;
- __u32 free_blocks;
+ __u32 free_clusters;
__u32 used_dirs;
};
@@ -424,7 +312,7 @@
if (flex_size > 1) {
stats->free_inodes = atomic_read(&flex_group[g].free_inodes);
- stats->free_blocks = atomic_read(&flex_group[g].free_blocks);
+ stats->free_clusters = atomic_read(&flex_group[g].free_clusters);
stats->used_dirs = atomic_read(&flex_group[g].used_dirs);
return;
}
@@ -432,11 +320,11 @@
desc = ext4_get_group_desc(sb, g, NULL);
if (desc) {
stats->free_inodes = ext4_free_inodes_count(sb, desc);
- stats->free_blocks = ext4_free_blks_count(sb, desc);
+ stats->free_clusters = ext4_free_group_clusters(sb, desc);
stats->used_dirs = ext4_used_dirs_count(sb, desc);
} else {
stats->free_inodes = 0;
- stats->free_blocks = 0;
+ stats->free_clusters = 0;
stats->used_dirs = 0;
}
}
@@ -471,10 +359,10 @@
ext4_group_t real_ngroups = ext4_get_groups_count(sb);
int inodes_per_group = EXT4_INODES_PER_GROUP(sb);
unsigned int freei, avefreei;
- ext4_fsblk_t freeb, avefreeb;
+ ext4_fsblk_t freeb, avefreec;
unsigned int ndirs;
int max_dirs, min_inodes;
- ext4_grpblk_t min_blocks;
+ ext4_grpblk_t min_clusters;
ext4_group_t i, grp, g, ngroups;
struct ext4_group_desc *desc;
struct orlov_stats stats;
@@ -490,9 +378,10 @@
freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter);
avefreei = freei / ngroups;
- freeb = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
- avefreeb = freeb;
- do_div(avefreeb, ngroups);
+ freeb = EXT4_C2B(sbi,
+ percpu_counter_read_positive(&sbi->s_freeclusters_counter));
+ avefreec = freeb;
+ do_div(avefreec, ngroups);
ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter);
if (S_ISDIR(mode) &&
@@ -518,7 +407,7 @@
continue;
if (stats.free_inodes < avefreei)
continue;
- if (stats.free_blocks < avefreeb)
+ if (stats.free_clusters < avefreec)
continue;
grp = g;
ret = 0;
@@ -556,7 +445,7 @@
min_inodes = avefreei - inodes_per_group*flex_size / 4;
if (min_inodes < 1)
min_inodes = 1;
- min_blocks = avefreeb - EXT4_BLOCKS_PER_GROUP(sb)*flex_size / 4;
+ min_clusters = avefreec - EXT4_CLUSTERS_PER_GROUP(sb)*flex_size / 4;
/*
* Start looking in the flex group where we last allocated an
@@ -575,7 +464,7 @@
continue;
if (stats.free_inodes < min_inodes)
continue;
- if (stats.free_blocks < min_blocks)
+ if (stats.free_clusters < min_clusters)
continue;
goto found_flex_bg;
}
@@ -659,7 +548,7 @@
*group = parent_group;
desc = ext4_get_group_desc(sb, *group, NULL);
if (desc && ext4_free_inodes_count(sb, desc) &&
- ext4_free_blks_count(sb, desc))
+ ext4_free_group_clusters(sb, desc))
return 0;
/*
@@ -683,7 +572,7 @@
*group -= ngroups;
desc = ext4_get_group_desc(sb, *group, NULL);
if (desc && ext4_free_inodes_count(sb, desc) &&
- ext4_free_blks_count(sb, desc))
+ ext4_free_group_clusters(sb, desc))
return 0;
}
@@ -802,7 +691,7 @@
* group to find a free inode.
*/
struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode,
- const struct qstr *qstr, __u32 goal)
+ const struct qstr *qstr, __u32 goal, uid_t *owner)
{
struct super_block *sb;
struct buffer_head *inode_bitmap_bh = NULL;
@@ -816,8 +705,6 @@
int ret2, err = 0;
struct inode *ret;
ext4_group_t i;
- int free = 0;
- static int once = 1;
ext4_group_t flex_group;
/* Cannot create files in a deleted directory */
@@ -843,26 +730,9 @@
goto got_group;
}
- if (sbi->s_log_groups_per_flex && test_opt(sb, OLDALLOC)) {
- ret2 = find_group_flex(sb, dir, &group);
- if (ret2 == -1) {
- ret2 = find_group_other(sb, dir, &group, mode);
- if (ret2 == 0 && once) {
- once = 0;
- printk(KERN_NOTICE "ext4: find_group_flex "
- "failed, fallback succeeded dir %lu\n",
- dir->i_ino);
- }
- }
- goto got_group;
- }
-
- if (S_ISDIR(mode)) {
- if (test_opt(sb, OLDALLOC))
- ret2 = find_group_dir(sb, dir, &group);
- else
- ret2 = find_group_orlov(sb, dir, &group, mode, qstr);
- } else
+ if (S_ISDIR(mode))
+ ret2 = find_group_orlov(sb, dir, &group, mode, qstr);
+ else
ret2 = find_group_other(sb, dir, &group, mode);
got_group:
@@ -950,26 +820,21 @@
goto fail;
}
- free = 0;
- ext4_lock_group(sb, group);
+ BUFFER_TRACE(block_bitmap_bh, "dirty block bitmap");
+ err = ext4_handle_dirty_metadata(handle, NULL, block_bitmap_bh);
+ brelse(block_bitmap_bh);
+
/* recheck and clear flag under lock if we still need to */
+ ext4_lock_group(sb, group);
if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
- free = ext4_free_blocks_after_init(sb, group, gdp);
gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
- ext4_free_blks_set(sb, gdp, free);
+ ext4_free_group_clusters_set(sb, gdp,
+ ext4_free_clusters_after_init(sb, group, gdp));
gdp->bg_checksum = ext4_group_desc_csum(sbi, group,
gdp);
}
ext4_unlock_group(sb, group);
- /* Don't need to dirty bitmap block if we didn't change it */
- if (free) {
- BUFFER_TRACE(block_bitmap_bh, "dirty block bitmap");
- err = ext4_handle_dirty_metadata(handle,
- NULL, block_bitmap_bh);
- }
-
- brelse(block_bitmap_bh);
if (err)
goto fail;
}
@@ -987,8 +852,11 @@
flex_group = ext4_flex_group(sbi, group);
atomic_dec(&sbi->s_flex_groups[flex_group].free_inodes);
}
-
- if (test_opt(sb, GRPID)) {
+ if (owner) {
+ inode->i_mode = mode;
+ inode->i_uid = owner[0];
+ inode->i_gid = owner[1];
+ } else if (test_opt(sb, GRPID)) {
inode->i_mode = mode;
inode->i_uid = current_fsuid();
inode->i_gid = dir->i_gid;
@@ -1005,11 +873,7 @@
ei->i_dir_start_lookup = 0;
ei->i_disksize = 0;
- /*
- * Don't inherit extent flag from directory, amongst others. We set
- * extent flag on newly created directory and file only if -o extent
- * mount option is specified
- */
+ /* Don't inherit extent flag from directory, amongst others. */
ei->i_flags =
ext4_mask_flags(mode, EXT4_I(dir)->i_flags & EXT4_FL_INHERITED);
ei->i_file_acl = 0;
@@ -1084,7 +948,7 @@
fail_drop:
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
brelse(inode_bitmap_bh);
@@ -1235,7 +1099,7 @@
* inode allocation from the current group, so we take alloc_sem lock, to
* block ext4_claim_inode until we are finished.
*/
-extern int ext4_init_inode_table(struct super_block *sb, ext4_group_t group,
+int ext4_init_inode_table(struct super_block *sb, ext4_group_t group,
int barrier)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c
index 0962642..3cfc73f 100644
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -699,6 +699,13 @@
/*
* Okay, we need to do block allocation.
*/
+ if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ EXT4_ERROR_INODE(inode, "Can't allocate blocks for "
+ "non-extent mapped inodes with bigalloc");
+ return -ENOSPC;
+ }
+
goal = ext4_find_goal(inode, map->m_lblk, partial);
/* the number of blocks need to allocate for [d,t]indirect blocks */
@@ -1343,7 +1350,9 @@
__le32 nr = 0;
int n = 0;
ext4_lblk_t last_block, max_block;
+ loff_t page_len;
unsigned blocksize = inode->i_sb->s_blocksize;
+ int err;
handle = start_transaction(inode);
if (IS_ERR(handle))
@@ -1354,9 +1363,16 @@
max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1)
>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
- if (inode->i_size & (blocksize - 1))
- if (ext4_block_truncate_page(handle, mapping, inode->i_size))
+ if (inode->i_size % PAGE_CACHE_SIZE != 0) {
+ page_len = PAGE_CACHE_SIZE -
+ (inode->i_size & (PAGE_CACHE_SIZE - 1));
+
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, inode->i_size, page_len, 0);
+
+ if (err)
goto out_stop;
+ }
if (last_block != max_block) {
n = ext4_block_to_path(inode, last_block, offsets, NULL);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 986e238..cc5a6da 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -42,7 +42,6 @@
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
-#include "ext4_extents.h"
#include "truncate.h"
#include <trace/events/ext4.h>
@@ -268,7 +267,7 @@
struct ext4_inode_info *ei = EXT4_I(inode);
spin_lock(&ei->i_block_reservation_lock);
- trace_ext4_da_update_reserve_space(inode, used);
+ trace_ext4_da_update_reserve_space(inode, used, quota_claim);
if (unlikely(used > ei->i_reserved_data_blocks)) {
ext4_msg(inode->i_sb, KERN_NOTICE, "%s: ino %lu, used %d "
"with only %d reserved data blocks\n",
@@ -281,7 +280,7 @@
/* Update per-inode reservations */
ei->i_reserved_data_blocks -= used;
ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks;
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
used + ei->i_allocated_meta_blocks);
ei->i_allocated_meta_blocks = 0;
@@ -291,7 +290,7 @@
* only when we have written all of the delayed
* allocation blocks.
*/
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
ei->i_reserved_meta_blocks);
ei->i_reserved_meta_blocks = 0;
ei->i_da_metadata_calc_len = 0;
@@ -300,14 +299,14 @@
/* Update quota subsystem for data blocks */
if (quota_claim)
- dquot_claim_block(inode, used);
+ dquot_claim_block(inode, EXT4_C2B(sbi, used));
else {
/*
* We did fallocate with an offset that is already delayed
* allocated. So on delayed allocated writeback we should
* not re-claim the quota for fallocated blocks.
*/
- dquot_release_reservation_block(inode, used);
+ dquot_release_reservation_block(inode, EXT4_C2B(sbi, used));
}
/*
@@ -399,6 +398,49 @@
}
/*
+ * Sets the BH_Da_Mapped bit on the buffer heads corresponding to the given map.
+ */
+static void set_buffers_da_mapped(struct inode *inode,
+ struct ext4_map_blocks *map)
+{
+ struct address_space *mapping = inode->i_mapping;
+ struct pagevec pvec;
+ int i, nr_pages;
+ pgoff_t index, end;
+
+ index = map->m_lblk >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
+ end = (map->m_lblk + map->m_len - 1) >>
+ (PAGE_CACHE_SHIFT - inode->i_blkbits);
+
+ pagevec_init(&pvec, 0);
+ while (index <= end) {
+ nr_pages = pagevec_lookup(&pvec, mapping, index,
+ min(end - index + 1,
+ (pgoff_t)PAGEVEC_SIZE));
+ if (nr_pages == 0)
+ break;
+ for (i = 0; i < nr_pages; i++) {
+ struct page *page = pvec.pages[i];
+ struct buffer_head *bh, *head;
+
+ if (unlikely(page->mapping != mapping) ||
+ !PageDirty(page))
+ break;
+
+ if (page_has_buffers(page)) {
+ bh = head = page_buffers(page);
+ do {
+ set_buffer_da_mapped(bh);
+ bh = bh->b_this_page;
+ } while (bh != head);
+ }
+ index++;
+ }
+ pagevec_release(&pvec);
+ }
+}
+
+/*
* The ext4_map_blocks() function tries to look up the requested blocks,
* and returns if the blocks are already mapped.
*
@@ -416,7 +458,7 @@
* the buffer head is mapped.
*
* It returns 0 if plain look up failed (blocks have not been allocated), in
- * that casem, buffer head is unmapped
+ * that case, buffer head is unmapped
*
* It returns the error in case of allocation failure.
*/
@@ -435,9 +477,11 @@
*/
down_read((&EXT4_I(inode)->i_data_sem));
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
- retval = ext4_ext_map_blocks(handle, inode, map, 0);
+ retval = ext4_ext_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
} else {
- retval = ext4_ind_map_blocks(handle, inode, map, 0);
+ retval = ext4_ind_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
}
up_read((&EXT4_I(inode)->i_data_sem));
@@ -455,7 +499,7 @@
* Returns if the blocks have already allocated
*
* Note that if blocks have been preallocated
- * ext4_ext_get_block() returns th create = 0
+ * ext4_ext_get_block() returns the create = 0
* with buffer head unmapped.
*/
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED)
@@ -517,9 +561,17 @@
(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE))
ext4_da_update_reserve_space(inode, retval, 1);
}
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
ext4_clear_inode_state(inode, EXT4_STATE_DELALLOC_RESERVED);
+ /* If we have successfully mapped the delayed allocated blocks,
+ * set the BH_Da_Mapped bit on them. Its important to do this
+ * under the protection of i_data_sem.
+ */
+ if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED)
+ set_buffers_da_mapped(inode, map);
+ }
+
up_write((&EXT4_I(inode)->i_data_sem));
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
int ret = check_block_validity(inode, map);
@@ -909,7 +961,11 @@
ext4_orphan_add(handle, inode);
if (ret2 < 0)
ret = ret2;
+ } else {
+ unlock_page(page);
+ page_cache_release(page);
}
+
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
@@ -1037,14 +1093,14 @@
}
/*
- * Reserve a single block located at lblock
+ * Reserve a single cluster located at lblock
*/
static int ext4_da_reserve_space(struct inode *inode, ext4_lblk_t lblock)
{
int retries = 0;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
- unsigned long md_needed;
+ unsigned int md_needed;
int ret;
/*
@@ -1054,7 +1110,8 @@
*/
repeat:
spin_lock(&ei->i_block_reservation_lock);
- md_needed = ext4_calc_metadata_amount(inode, lblock);
+ md_needed = EXT4_NUM_B2C(sbi,
+ ext4_calc_metadata_amount(inode, lblock));
trace_ext4_da_reserve_space(inode, md_needed);
spin_unlock(&ei->i_block_reservation_lock);
@@ -1063,15 +1120,15 @@
* us from metadata over-estimation, though we may go over by
* a small amount in the end. Here we just reserve for data.
*/
- ret = dquot_reserve_block(inode, 1);
+ ret = dquot_reserve_block(inode, EXT4_C2B(sbi, 1));
if (ret)
return ret;
/*
* We do still charge estimated metadata to the sb though;
* we cannot afford to run out of free blocks.
*/
- if (ext4_claim_free_blocks(sbi, md_needed + 1, 0)) {
- dquot_release_reservation_block(inode, 1);
+ if (ext4_claim_free_clusters(sbi, md_needed + 1, 0)) {
+ dquot_release_reservation_block(inode, EXT4_C2B(sbi, 1));
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
yield();
goto repeat;
@@ -1118,19 +1175,21 @@
* We can release all of the reserved metadata blocks
* only when we have written all of the delayed
* allocation blocks.
+ * Note that in case of bigalloc, i_reserved_meta_blocks,
+ * i_reserved_data_blocks, etc. refer to number of clusters.
*/
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
ei->i_reserved_meta_blocks);
ei->i_reserved_meta_blocks = 0;
ei->i_da_metadata_calc_len = 0;
}
/* update fs dirty data blocks counter */
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, to_free);
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter, to_free);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- dquot_release_reservation_block(inode, to_free);
+ dquot_release_reservation_block(inode, EXT4_C2B(sbi, to_free));
}
static void ext4_da_page_release_reservation(struct page *page,
@@ -1139,6 +1198,9 @@
int to_release = 0;
struct buffer_head *head, *bh;
unsigned int curr_off = 0;
+ struct inode *inode = page->mapping->host;
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ int num_clusters;
head = page_buffers(page);
bh = head;
@@ -1148,10 +1210,24 @@
if ((offset <= curr_off) && (buffer_delay(bh))) {
to_release++;
clear_buffer_delay(bh);
+ clear_buffer_da_mapped(bh);
}
curr_off = next_off;
} while ((bh = bh->b_this_page) != head);
- ext4_da_release_space(page->mapping->host, to_release);
+
+ /* If we have released all the blocks belonging to a cluster, then we
+ * need to release the reserved space for that cluster. */
+ num_clusters = EXT4_NUM_B2C(sbi, to_release);
+ while (num_clusters > 0) {
+ ext4_fsblk_t lblk;
+ lblk = (page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits)) +
+ ((num_clusters - 1) << sbi->s_cluster_bits);
+ if (sbi->s_cluster_ratio == 1 ||
+ !ext4_find_delalloc_cluster(inode, lblk, 1))
+ ext4_da_release_space(inode, 1);
+
+ num_clusters--;
+ }
}
/*
@@ -1253,6 +1329,8 @@
clear_buffer_delay(bh);
bh->b_blocknr = pblock;
}
+ if (buffer_da_mapped(bh))
+ clear_buffer_da_mapped(bh);
if (buffer_unwritten(bh) ||
buffer_mapped(bh))
BUG_ON(bh->b_blocknr != pblock);
@@ -1346,12 +1424,15 @@
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
printk(KERN_CRIT "Total free blocks count %lld\n",
- ext4_count_free_blocks(inode->i_sb));
+ EXT4_C2B(EXT4_SB(inode->i_sb),
+ ext4_count_free_clusters(inode->i_sb)));
printk(KERN_CRIT "Free/Dirty block details\n");
printk(KERN_CRIT "free_blocks=%lld\n",
- (long long) percpu_counter_sum(&sbi->s_freeblocks_counter));
+ (long long) EXT4_C2B(EXT4_SB(inode->i_sb),
+ percpu_counter_sum(&sbi->s_freeclusters_counter)));
printk(KERN_CRIT "dirty_blocks=%lld\n",
- (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+ (long long) EXT4_C2B(EXT4_SB(inode->i_sb),
+ percpu_counter_sum(&sbi->s_dirtyclusters_counter)));
printk(KERN_CRIT "Block reservation details\n");
printk(KERN_CRIT "i_reserved_data_blocks=%u\n",
EXT4_I(inode)->i_reserved_data_blocks);
@@ -1430,8 +1511,7 @@
if (err == -EAGAIN)
goto submit_io;
- if (err == -ENOSPC &&
- ext4_count_free_blocks(sb)) {
+ if (err == -ENOSPC && ext4_count_free_clusters(sb)) {
mpd->retval = err;
goto submit_io;
}
@@ -1471,13 +1551,15 @@
for (i = 0; i < map.m_len; i++)
unmap_underlying_metadata(bdev, map.m_pblk + i);
- }
- if (ext4_should_order_data(mpd->inode)) {
- err = ext4_jbd2_file_inode(handle, mpd->inode);
- if (err)
- /* This only happens if the journal is aborted */
- return;
+ if (ext4_should_order_data(mpd->inode)) {
+ err = ext4_jbd2_file_inode(handle, mpd->inode);
+ if (err) {
+ /* Only if the journal is aborted */
+ mpd->retval = err;
+ goto submit_io;
+ }
+ }
}
/*
@@ -1584,6 +1666,66 @@
}
/*
+ * This function is grabs code from the very beginning of
+ * ext4_map_blocks, but assumes that the caller is from delayed write
+ * time. This function looks up the requested blocks and sets the
+ * buffer delay bit under the protection of i_data_sem.
+ */
+static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
+ struct ext4_map_blocks *map,
+ struct buffer_head *bh)
+{
+ int retval;
+ sector_t invalid_block = ~((sector_t) 0xffff);
+
+ if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+ invalid_block = ~0;
+
+ map->m_flags = 0;
+ ext_debug("ext4_da_map_blocks(): inode %lu, max_blocks %u,"
+ "logical block %lu\n", inode->i_ino, map->m_len,
+ (unsigned long) map->m_lblk);
+ /*
+ * Try to see if we can get the block without requesting a new
+ * file system block.
+ */
+ down_read((&EXT4_I(inode)->i_data_sem));
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
+ retval = ext4_ext_map_blocks(NULL, inode, map, 0);
+ else
+ retval = ext4_ind_map_blocks(NULL, inode, map, 0);
+
+ if (retval == 0) {
+ /*
+ * XXX: __block_prepare_write() unmaps passed block,
+ * is it OK?
+ */
+ /* If the block was allocated from previously allocated cluster,
+ * then we dont need to reserve it again. */
+ if (!(map->m_flags & EXT4_MAP_FROM_CLUSTER)) {
+ retval = ext4_da_reserve_space(inode, iblock);
+ if (retval)
+ /* not enough space to reserve */
+ goto out_unlock;
+ }
+
+ /* Clear EXT4_MAP_FROM_CLUSTER flag since its purpose is served
+ * and it should not appear on the bh->b_state.
+ */
+ map->m_flags &= ~EXT4_MAP_FROM_CLUSTER;
+
+ map_bh(bh, inode->i_sb, invalid_block);
+ set_buffer_new(bh);
+ set_buffer_delay(bh);
+ }
+
+out_unlock:
+ up_read((&EXT4_I(inode)->i_data_sem));
+
+ return retval;
+}
+
+/*
* This is a special get_blocks_t callback which is used by
* ext4_da_write_begin(). It will either return mapped block or
* reserve space for a single block.
@@ -1600,10 +1742,6 @@
{
struct ext4_map_blocks map;
int ret = 0;
- sector_t invalid_block = ~((sector_t) 0xffff);
-
- if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
- invalid_block = ~0;
BUG_ON(create == 0);
BUG_ON(bh->b_size != inode->i_sb->s_blocksize);
@@ -1616,25 +1754,9 @@
* preallocated blocks are unmapped but should treated
* the same as allocated blocks.
*/
- ret = ext4_map_blocks(NULL, inode, &map, 0);
- if (ret < 0)
+ ret = ext4_da_map_blocks(inode, iblock, &map, bh);
+ if (ret <= 0)
return ret;
- if (ret == 0) {
- if (buffer_delay(bh))
- return 0; /* Not sure this could or should happen */
- /*
- * XXX: __block_write_begin() unmaps passed block, is it OK?
- */
- ret = ext4_da_reserve_space(inode, iblock);
- if (ret)
- /* not enough space to reserve */
- return ret;
-
- map_bh(bh, inode->i_sb, invalid_block);
- set_buffer_new(bh);
- set_buffer_delay(bh);
- return 0;
- }
map_bh(bh, inode->i_sb, map.m_pblk);
bh->b_state = (bh->b_state & ~EXT4_MAP_FLAGS) | map.m_flags;
@@ -1811,8 +1933,12 @@
* We don't want to do block allocation, so redirty
* the page and return. We may reach here when we do
* a journal commit via journal_submit_inode_data_buffers.
- * We can also reach here via shrink_page_list
+ * We can also reach here via shrink_page_list but it
+ * should never be for direct reclaim so warn if that
+ * happens
*/
+ WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD)) ==
+ PF_MEMALLOC);
goto redirty_page;
}
if (commit_write)
@@ -2046,6 +2172,7 @@
struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
pgoff_t done_index = 0;
pgoff_t end;
+ struct blk_plug plug;
trace_ext4_da_writepages(inode, wbc);
@@ -2124,6 +2251,7 @@
if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
tag_pages_for_writeback(mapping, index, end);
+ blk_start_plug(&plug);
while (!ret && wbc->nr_to_write > 0) {
/*
@@ -2174,11 +2302,12 @@
ret = 0;
} else if (ret == MPAGE_DA_EXTENT_TAIL) {
/*
- * got one extent now try with
- * rest of the pages
+ * Got one extent now try with rest of the pages.
+ * If mpd.retval is set -EIO, journal is aborted.
+ * So we don't need to write any more.
*/
pages_written += mpd.pages_written;
- ret = 0;
+ ret = mpd.retval;
io_done = 1;
} else if (wbc->nr_to_write)
/*
@@ -2188,6 +2317,7 @@
*/
break;
}
+ blk_finish_plug(&plug);
if (!io_done && !cycled) {
cycled = 1;
index = 0;
@@ -2226,10 +2356,11 @@
* Delalloc need an accurate free block accounting. So switch
* to non delalloc when we are near to error range.
*/
- free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
- dirty_blocks = percpu_counter_read_positive(&sbi->s_dirtyblocks_counter);
+ free_blocks = EXT4_C2B(sbi,
+ percpu_counter_read_positive(&sbi->s_freeclusters_counter));
+ dirty_blocks = percpu_counter_read_positive(&sbi->s_dirtyclusters_counter);
if (2 * free_blocks < 3 * dirty_blocks ||
- free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) {
+ free_blocks < (dirty_blocks + EXT4_FREECLUSTERS_WATERMARK)) {
/*
* free block count is less than 150% of dirty blocks
* or free blocks is less than watermark
@@ -2255,6 +2386,7 @@
pgoff_t index;
struct inode *inode = mapping->host;
handle_t *handle;
+ loff_t page_len;
index = pos >> PAGE_CACHE_SHIFT;
@@ -2301,6 +2433,13 @@
*/
if (pos + len > inode->i_size)
ext4_truncate_failed_write(inode);
+ } else {
+ page_len = pos & (PAGE_CACHE_SIZE - 1);
+ if (page_len > 0) {
+ ret = ext4_discard_partial_page_buffers_no_lock(handle,
+ inode, page, pos - page_len, page_len,
+ EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED);
+ }
}
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -2343,6 +2482,7 @@
loff_t new_i_size;
unsigned long start, end;
int write_mode = (int)(unsigned long)fsdata;
+ loff_t page_len;
if (write_mode == FALL_BACK_TO_NONDELALLOC) {
if (ext4_should_order_data(inode)) {
@@ -2391,6 +2531,16 @@
}
ret2 = generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
+
+ page_len = PAGE_CACHE_SIZE -
+ ((pos + copied - 1) & (PAGE_CACHE_SIZE - 1));
+
+ if (page_len > 0) {
+ ret = ext4_discard_partial_page_buffers_no_lock(handle,
+ inode, page, pos + copied - 1, page_len,
+ EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED);
+ }
+
copied = ret2;
if (ret2 < 0)
ret = ret2;
@@ -2685,10 +2835,7 @@
* but being more careful is always safe for the future change.
*/
inode = io_end->inode;
- if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
- io_end->flag |= EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- }
+ ext4_set_io_unwritten_flag(inode, io_end);
/* Add the io_end to per-inode completed io list*/
spin_lock_irqsave(&EXT4_I(inode)->i_completed_io_lock, flags);
@@ -2854,6 +3001,12 @@
struct inode *inode = file->f_mapping->host;
ssize_t ret;
+ /*
+ * If we are doing data journalling we don't support O_DIRECT
+ */
+ if (ext4_should_journal_data(inode))
+ return 0;
+
trace_ext4_direct_IO_enter(inode, offset, iov_length(iov, nr_segs), rw);
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
ret = ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs);
@@ -2923,6 +3076,7 @@
.bmap = ext4_bmap,
.invalidatepage = ext4_invalidatepage,
.releasepage = ext4_releasepage,
+ .direct_IO = ext4_direct_IO,
.is_partially_uptodate = block_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
};
@@ -2959,6 +3113,227 @@
inode->i_mapping->a_ops = &ext4_journalled_aops;
}
+
+/*
+ * ext4_discard_partial_page_buffers()
+ * Wrapper function for ext4_discard_partial_page_buffers_no_lock.
+ * This function finds and locks the page containing the offset
+ * "from" and passes it to ext4_discard_partial_page_buffers_no_lock.
+ * Calling functions that already have the page locked should call
+ * ext4_discard_partial_page_buffers_no_lock directly.
+ */
+int ext4_discard_partial_page_buffers(handle_t *handle,
+ struct address_space *mapping, loff_t from,
+ loff_t length, int flags)
+{
+ struct inode *inode = mapping->host;
+ struct page *page;
+ int err = 0;
+
+ page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
+ mapping_gfp_mask(mapping) & ~__GFP_FS);
+ if (!page)
+ return -ENOMEM;
+
+ err = ext4_discard_partial_page_buffers_no_lock(handle, inode, page,
+ from, length, flags);
+
+ unlock_page(page);
+ page_cache_release(page);
+ return err;
+}
+
+/*
+ * ext4_discard_partial_page_buffers_no_lock()
+ * Zeros a page range of length 'length' starting from offset 'from'.
+ * Buffer heads that correspond to the block aligned regions of the
+ * zeroed range will be unmapped. Unblock aligned regions
+ * will have the corresponding buffer head mapped if needed so that
+ * that region of the page can be updated with the partial zero out.
+ *
+ * This function assumes that the page has already been locked. The
+ * The range to be discarded must be contained with in the given page.
+ * If the specified range exceeds the end of the page it will be shortened
+ * to the end of the page that corresponds to 'from'. This function is
+ * appropriate for updating a page and it buffer heads to be unmapped and
+ * zeroed for blocks that have been either released, or are going to be
+ * released.
+ *
+ * handle: The journal handle
+ * inode: The files inode
+ * page: A locked page that contains the offset "from"
+ * from: The starting byte offset (from the begining of the file)
+ * to begin discarding
+ * len: The length of bytes to discard
+ * flags: Optional flags that may be used:
+ *
+ * EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED
+ * Only zero the regions of the page whose buffer heads
+ * have already been unmapped. This flag is appropriate
+ * for updateing the contents of a page whose blocks may
+ * have already been released, and we only want to zero
+ * out the regions that correspond to those released blocks.
+ *
+ * Returns zero on sucess or negative on failure.
+ */
+int ext4_discard_partial_page_buffers_no_lock(handle_t *handle,
+ struct inode *inode, struct page *page, loff_t from,
+ loff_t length, int flags)
+{
+ ext4_fsblk_t index = from >> PAGE_CACHE_SHIFT;
+ unsigned int offset = from & (PAGE_CACHE_SIZE-1);
+ unsigned int blocksize, max, pos;
+ ext4_lblk_t iblock;
+ struct buffer_head *bh;
+ int err = 0;
+
+ blocksize = inode->i_sb->s_blocksize;
+ max = PAGE_CACHE_SIZE - offset;
+
+ if (index != page->index)
+ return -EINVAL;
+
+ /*
+ * correct length if it does not fall between
+ * 'from' and the end of the page
+ */
+ if (length > max || length < 0)
+ length = max;
+
+ iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits);
+
+ if (!page_has_buffers(page)) {
+ /*
+ * If the range to be discarded covers a partial block
+ * we need to get the page buffers. This is because
+ * partial blocks cannot be released and the page needs
+ * to be updated with the contents of the block before
+ * we write the zeros on top of it.
+ */
+ if ((from & (blocksize - 1)) ||
+ ((from + length) & (blocksize - 1))) {
+ create_empty_buffers(page, blocksize, 0);
+ } else {
+ /*
+ * If there are no partial blocks,
+ * there is nothing to update,
+ * so we can return now
+ */
+ return 0;
+ }
+ }
+
+ /* Find the buffer that contains "offset" */
+ bh = page_buffers(page);
+ pos = blocksize;
+ while (offset >= pos) {
+ bh = bh->b_this_page;
+ iblock++;
+ pos += blocksize;
+ }
+
+ pos = offset;
+ while (pos < offset + length) {
+ unsigned int end_of_block, range_to_discard;
+
+ err = 0;
+
+ /* The length of space left to zero and unmap */
+ range_to_discard = offset + length - pos;
+
+ /* The length of space until the end of the block */
+ end_of_block = blocksize - (pos & (blocksize-1));
+
+ /*
+ * Do not unmap or zero past end of block
+ * for this buffer head
+ */
+ if (range_to_discard > end_of_block)
+ range_to_discard = end_of_block;
+
+
+ /*
+ * Skip this buffer head if we are only zeroing unampped
+ * regions of the page
+ */
+ if (flags & EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED &&
+ buffer_mapped(bh))
+ goto next;
+
+ /* If the range is block aligned, unmap */
+ if (range_to_discard == blocksize) {
+ clear_buffer_dirty(bh);
+ bh->b_bdev = NULL;
+ clear_buffer_mapped(bh);
+ clear_buffer_req(bh);
+ clear_buffer_new(bh);
+ clear_buffer_delay(bh);
+ clear_buffer_unwritten(bh);
+ clear_buffer_uptodate(bh);
+ zero_user(page, pos, range_to_discard);
+ BUFFER_TRACE(bh, "Buffer discarded");
+ goto next;
+ }
+
+ /*
+ * If this block is not completely contained in the range
+ * to be discarded, then it is not going to be released. Because
+ * we need to keep this block, we need to make sure this part
+ * of the page is uptodate before we modify it by writeing
+ * partial zeros on it.
+ */
+ if (!buffer_mapped(bh)) {
+ /*
+ * Buffer head must be mapped before we can read
+ * from the block
+ */
+ BUFFER_TRACE(bh, "unmapped");
+ ext4_get_block(inode, iblock, bh, 0);
+ /* unmapped? It's a hole - nothing to do */
+ if (!buffer_mapped(bh)) {
+ BUFFER_TRACE(bh, "still unmapped");
+ goto next;
+ }
+ }
+
+ /* Ok, it's mapped. Make sure it's up-to-date */
+ if (PageUptodate(page))
+ set_buffer_uptodate(bh);
+
+ if (!buffer_uptodate(bh)) {
+ err = -EIO;
+ ll_rw_block(READ, 1, &bh);
+ wait_on_buffer(bh);
+ /* Uhhuh. Read error. Complain and punt.*/
+ if (!buffer_uptodate(bh))
+ goto next;
+ }
+
+ if (ext4_should_journal_data(inode)) {
+ BUFFER_TRACE(bh, "get write access");
+ err = ext4_journal_get_write_access(handle, bh);
+ if (err)
+ goto next;
+ }
+
+ zero_user(page, pos, range_to_discard);
+
+ err = 0;
+ if (ext4_should_journal_data(inode)) {
+ err = ext4_handle_dirty_metadata(handle, inode, bh);
+ } else
+ mark_buffer_dirty(bh);
+
+ BUFFER_TRACE(bh, "Partial buffer zeroed");
+next:
+ bh = bh->b_this_page;
+ iblock++;
+ pos += range_to_discard;
+ }
+
+ return err;
+}
+
/*
* ext4_block_truncate_page() zeroes out a mapping from file offset `from'
* up to the end of the block which corresponds to `from'.
@@ -3001,7 +3376,7 @@
page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
mapping_gfp_mask(mapping) & ~__GFP_FS);
if (!page)
- return -EINVAL;
+ return -ENOMEM;
blocksize = inode->i_sb->s_blocksize;
max = blocksize - (offset & (blocksize - 1));
@@ -3070,11 +3445,8 @@
err = 0;
if (ext4_should_journal_data(inode)) {
err = ext4_handle_dirty_metadata(handle, inode, bh);
- } else {
- if (ext4_should_order_data(inode) && EXT4_I(inode)->jinode)
- err = ext4_jbd2_file_inode(handle, inode);
+ } else
mark_buffer_dirty(bh);
- }
unlock:
unlock_page(page);
@@ -3115,6 +3487,11 @@
return -ENOTSUPP;
}
+ if (EXT4_SB(inode->i_sb)->s_cluster_ratio > 1) {
+ /* TODO: Add support for bigalloc file systems */
+ return -ENOTSUPP;
+ }
+
return ext4_ext_punch_hole(file, offset, length);
}
@@ -3414,7 +3791,7 @@
inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16;
inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16;
}
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
ext4_clear_state_flags(ei); /* Only relevant on 32-bit archs */
ei->i_dir_start_lookup = 0;
@@ -4416,6 +4793,7 @@
PAGE_CACHE_SIZE, NULL, do_journal_get_write_access)) {
unlock_page(page);
ret = VM_FAULT_SIGBUS;
+ ext4_journal_stop(handle);
goto out;
}
ext4_set_inode_state(inode, EXT4_STATE_JDATA);
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index f18bfe3..a567968 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -21,6 +21,7 @@
long ext4_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
+ struct super_block *sb = inode->i_sb;
struct ext4_inode_info *ei = EXT4_I(inode);
unsigned int flags;
@@ -173,33 +174,8 @@
mnt_drop_write(filp->f_path.mnt);
return err;
}
-#ifdef CONFIG_JBD2_DEBUG
- case EXT4_IOC_WAIT_FOR_READONLY:
- /*
- * This is racy - by the time we're woken up and running,
- * the superblock could be released. And the module could
- * have been unloaded. So sue me.
- *
- * Returns 1 if it slept, else zero.
- */
- {
- struct super_block *sb = inode->i_sb;
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&EXT4_SB(sb)->ro_wait_queue, &wait);
- if (timer_pending(&EXT4_SB(sb)->turn_ro_timer)) {
- schedule();
- ret = 1;
- }
- remove_wait_queue(&EXT4_SB(sb)->ro_wait_queue, &wait);
- return ret;
- }
-#endif
case EXT4_IOC_GROUP_EXTEND: {
ext4_fsblk_t n_blocks_count;
- struct super_block *sb = inode->i_sb;
int err, err2=0;
err = ext4_resize_begin(sb);
@@ -209,6 +185,13 @@
if (get_user(n_blocks_count, (__u32 __user *)arg))
return -EFAULT;
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "Online resizing not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
@@ -250,6 +233,13 @@
goto mext_out;
}
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "Online defrag not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
err = mnt_want_write(filp->f_path.mnt);
if (err)
goto mext_out;
@@ -270,7 +260,6 @@
case EXT4_IOC_GROUP_ADD: {
struct ext4_new_group_data input;
- struct super_block *sb = inode->i_sb;
int err, err2=0;
err = ext4_resize_begin(sb);
@@ -281,6 +270,13 @@
sizeof(input)))
return -EFAULT;
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "Online resizing not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
@@ -337,7 +333,6 @@
case FITRIM:
{
- struct super_block *sb = inode->i_sb;
struct request_queue *q = bdev_get_queue(sb->s_bdev);
struct fstrim_range range;
int ret = 0;
@@ -348,7 +343,14 @@
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
- if (copy_from_user(&range, (struct fstrim_range *)arg,
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "FITRIM not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
+ if (copy_from_user(&range, (struct fstrim_range __user *)arg,
sizeof(range)))
return -EFAULT;
@@ -358,7 +360,7 @@
if (ret < 0)
return ret;
- if (copy_to_user((struct fstrim_range *)arg, &range,
+ if (copy_to_user((struct fstrim_range __user *)arg, &range,
sizeof(range)))
return -EFAULT;
@@ -396,11 +398,6 @@
case EXT4_IOC32_SETVERSION_OLD:
cmd = EXT4_IOC_SETVERSION_OLD;
break;
-#ifdef CONFIG_JBD2_DEBUG
- case EXT4_IOC32_WAIT_FOR_READONLY:
- cmd = EXT4_IOC_WAIT_FOR_READONLY;
- break;
-#endif
case EXT4_IOC32_GETRSVSZ:
cmd = EXT4_IOC_GETRSVSZ;
break;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 17a5a57..e2d8be8 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -70,8 +70,8 @@
*
* pa_lstart -> the logical start block for this prealloc space
* pa_pstart -> the physical start block for this prealloc space
- * pa_len -> length for this prealloc space
- * pa_free -> free space available in this prealloc space
+ * pa_len -> length for this prealloc space (in clusters)
+ * pa_free -> free space available in this prealloc space (in clusters)
*
* The inode preallocation space is used looking at the _logical_ start
* block. If only the logical file block falls within the range of prealloc
@@ -126,7 +126,8 @@
* list. In case of inode preallocation we follow a list of heuristics
* based on file size. This can be found in ext4_mb_normalize_request. If
* we are doing a group prealloc we try to normalize the request to
- * sbi->s_mb_group_prealloc. Default value of s_mb_group_prealloc is
+ * sbi->s_mb_group_prealloc. The default value of s_mb_group_prealloc is
+ * dependent on the cluster size; for non-bigalloc file systems, it is
* 512 blocks. This can be tuned via
* /sys/fs/ext4/<partition>/mb_group_prealloc. The value is represented in
* terms of number of blocks. If we have mounted the file system with -O
@@ -459,7 +460,7 @@
ext4_fsblk_t blocknr;
blocknr = ext4_group_first_block_no(sb, e4b->bd_group);
- blocknr += first + i;
+ blocknr += EXT4_C2B(EXT4_SB(sb), first + i);
ext4_grp_locked_error(sb, e4b->bd_group,
inode ? inode->i_ino : 0,
blocknr,
@@ -580,7 +581,7 @@
continue;
}
- /* both bits in buddy2 must be 0 */
+ /* both bits in buddy2 must be 1 */
MB_CHECK_ASSERT(mb_test_bit(i << 1, buddy2));
MB_CHECK_ASSERT(mb_test_bit((i << 1) + 1, buddy2));
@@ -653,7 +654,7 @@
ext4_grpblk_t chunk;
unsigned short border;
- BUG_ON(len > EXT4_BLOCKS_PER_GROUP(sb));
+ BUG_ON(len > EXT4_CLUSTERS_PER_GROUP(sb));
border = 2 << sb->s_blocksize_bits;
@@ -705,7 +706,7 @@
void *buddy, void *bitmap, ext4_group_t group)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
- ext4_grpblk_t max = EXT4_BLOCKS_PER_GROUP(sb);
+ ext4_grpblk_t max = EXT4_CLUSTERS_PER_GROUP(sb);
ext4_grpblk_t i = 0;
ext4_grpblk_t first;
ext4_grpblk_t len;
@@ -734,7 +735,7 @@
if (free != grp->bb_free) {
ext4_grp_locked_error(sb, group, 0, 0,
- "%u blocks in bitmap, %u in gd",
+ "%u clusters in bitmap, %u in gd",
free, grp->bb_free);
/*
* If we intent to continue, we consider group descritor
@@ -1339,7 +1340,7 @@
ext4_fsblk_t blocknr;
blocknr = ext4_group_first_block_no(sb, e4b->bd_group);
- blocknr += block;
+ blocknr += EXT4_C2B(EXT4_SB(sb), block);
ext4_grp_locked_error(sb, e4b->bd_group,
inode ? inode->i_ino : 0,
blocknr,
@@ -1390,7 +1391,6 @@
{
int next = block;
int max;
- int ord;
void *buddy;
assert_spin_locked(ext4_group_lock_ptr(e4b->bd_sb, e4b->bd_group));
@@ -1432,9 +1432,8 @@
if (mb_test_bit(next, EXT4_MB_BITMAP(e4b)))
break;
- ord = mb_find_order_for_block(e4b, next);
+ order = mb_find_order_for_block(e4b, next);
- order = ord;
block = next >> order;
ex->fe_len += 1 << order;
}
@@ -1624,8 +1623,8 @@
struct ext4_free_extent *gex = &ac->ac_g_ex;
BUG_ON(ex->fe_len <= 0);
- BUG_ON(ex->fe_len > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
- BUG_ON(ex->fe_start >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+ BUG_ON(ex->fe_len > EXT4_CLUSTERS_PER_GROUP(ac->ac_sb));
+ BUG_ON(ex->fe_start >= EXT4_CLUSTERS_PER_GROUP(ac->ac_sb));
BUG_ON(ac->ac_status != AC_STATUS_CONTINUE);
ac->ac_found++;
@@ -1823,15 +1822,15 @@
while (free && ac->ac_status == AC_STATUS_CONTINUE) {
i = mb_find_next_zero_bit(bitmap,
- EXT4_BLOCKS_PER_GROUP(sb), i);
- if (i >= EXT4_BLOCKS_PER_GROUP(sb)) {
+ EXT4_CLUSTERS_PER_GROUP(sb), i);
+ if (i >= EXT4_CLUSTERS_PER_GROUP(sb)) {
/*
* IF we have corrupt bitmap, we won't find any
* free blocks even though group info says we
* we have free blocks
*/
ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
- "%d free blocks as per "
+ "%d free clusters as per "
"group info. But bitmap says 0",
free);
break;
@@ -1841,7 +1840,7 @@
BUG_ON(ex.fe_len <= 0);
if (free < ex.fe_len) {
ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
- "%d free blocks as per "
+ "%d free clusters as per "
"group info. But got %d blocks",
free, ex.fe_len);
/*
@@ -1887,7 +1886,7 @@
do_div(a, sbi->s_stripe);
i = (a * sbi->s_stripe) - first_group_block;
- while (i < EXT4_BLOCKS_PER_GROUP(sb)) {
+ while (i < EXT4_CLUSTERS_PER_GROUP(sb)) {
if (!mb_test_bit(i, bitmap)) {
max = mb_find_extent(e4b, 0, i, sbi->s_stripe, &ex);
if (max >= sbi->s_stripe) {
@@ -2252,10 +2251,10 @@
*/
if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
meta_group_info[i]->bb_free =
- ext4_free_blocks_after_init(sb, group, desc);
+ ext4_free_clusters_after_init(sb, group, desc);
} else {
meta_group_info[i]->bb_free =
- ext4_free_blks_count(sb, desc);
+ ext4_free_group_clusters(sb, desc);
}
INIT_LIST_HEAD(&meta_group_info[i]->bb_prealloc_list);
@@ -2473,7 +2472,20 @@
sbi->s_mb_stats = MB_DEFAULT_STATS;
sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
- sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
+ /*
+ * The default group preallocation is 512, which for 4k block
+ * sizes translates to 2 megabytes. However for bigalloc file
+ * systems, this is probably too big (i.e, if the cluster size
+ * is 1 megabyte, then group preallocation size becomes half a
+ * gigabyte!). As a default, we will keep a two megabyte
+ * group pralloc size for cluster sizes up to 64k, and after
+ * that, we will force a minimum group preallocation size of
+ * 32 clusters. This translates to 8 megs when the cluster
+ * size is 256k, and 32 megs when the cluster size is 1 meg,
+ * which seems reasonable as a default.
+ */
+ sbi->s_mb_group_prealloc = max(MB_DEFAULT_GROUP_PREALLOC >>
+ sbi->s_cluster_bits, 32);
/*
* If there is a s_stripe > 1, then we set the s_mb_group_prealloc
* to the lowest multiple of s_stripe which is bigger than
@@ -2490,7 +2502,7 @@
sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group);
if (sbi->s_locality_groups == NULL) {
ret = -ENOMEM;
- goto out;
+ goto out_free_groupinfo_slab;
}
for_each_possible_cpu(i) {
struct ext4_locality_group *lg;
@@ -2503,9 +2515,8 @@
/* init file for buddy data */
ret = ext4_mb_init_backend(sb);
- if (ret != 0) {
- goto out;
- }
+ if (ret != 0)
+ goto out_free_locality_groups;
if (sbi->s_proc)
proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
@@ -2513,11 +2524,19 @@
if (sbi->s_journal)
sbi->s_journal->j_commit_callback = release_blocks_on_commit;
+
+ return 0;
+
+out_free_locality_groups:
+ free_percpu(sbi->s_locality_groups);
+ sbi->s_locality_groups = NULL;
+out_free_groupinfo_slab:
+ ext4_groupinfo_destroy_slabs();
out:
- if (ret) {
- kfree(sbi->s_mb_offsets);
- kfree(sbi->s_mb_maxs);
- }
+ kfree(sbi->s_mb_offsets);
+ sbi->s_mb_offsets = NULL;
+ kfree(sbi->s_mb_maxs);
+ sbi->s_mb_maxs = NULL;
return ret;
}
@@ -2602,11 +2621,13 @@
}
static inline int ext4_issue_discard(struct super_block *sb,
- ext4_group_t block_group, ext4_grpblk_t block, int count)
+ ext4_group_t block_group, ext4_grpblk_t cluster, int count)
{
ext4_fsblk_t discard_block;
- discard_block = block + ext4_group_first_block_no(sb, block_group);
+ discard_block = (EXT4_C2B(EXT4_SB(sb), cluster) +
+ ext4_group_first_block_no(sb, block_group));
+ count = EXT4_C2B(EXT4_SB(sb), count);
trace_ext4_discard_blocks(sb,
(unsigned long long) discard_block, count);
return sb_issue_discard(sb, discard_block, count, GFP_NOFS, 0);
@@ -2633,7 +2654,7 @@
if (test_opt(sb, DISCARD))
ext4_issue_discard(sb, entry->group,
- entry->start_blk, entry->count);
+ entry->start_cluster, entry->count);
err = ext4_mb_load_buddy(sb, entry->group, &e4b);
/* we expect to find existing buddy because it's pinned */
@@ -2646,7 +2667,7 @@
ext4_lock_group(sb, entry->group);
/* Take it out of per group rb tree */
rb_erase(&entry->node, &(db->bb_free_root));
- mb_free_blocks(NULL, &e4b, entry->start_blk, entry->count);
+ mb_free_blocks(NULL, &e4b, entry->start_cluster, entry->count);
/*
* Clear the trimmed flag for the group so that the next
@@ -2752,7 +2773,7 @@
*/
static noinline_for_stack int
ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
- handle_t *handle, unsigned int reserv_blks)
+ handle_t *handle, unsigned int reserv_clstrs)
{
struct buffer_head *bitmap_bh = NULL;
struct ext4_group_desc *gdp;
@@ -2783,7 +2804,7 @@
goto out_err;
ext4_debug("using block group %u(%d)\n", ac->ac_b_ex.fe_group,
- ext4_free_blks_count(sb, gdp));
+ ext4_free_group_clusters(sb, gdp));
err = ext4_journal_get_write_access(handle, gdp_bh);
if (err)
@@ -2791,7 +2812,7 @@
block = ext4_grp_offs_to_block(sb, &ac->ac_b_ex);
- len = ac->ac_b_ex.fe_len;
+ len = EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
if (!ext4_data_block_valid(sbi, block, len)) {
ext4_error(sb, "Allocating blocks %llu-%llu which overlap "
"fs metadata\n", block, block+len);
@@ -2823,28 +2844,29 @@
ac->ac_b_ex.fe_len);
if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
- ext4_free_blks_set(sb, gdp,
- ext4_free_blocks_after_init(sb,
- ac->ac_b_ex.fe_group, gdp));
+ ext4_free_group_clusters_set(sb, gdp,
+ ext4_free_clusters_after_init(sb,
+ ac->ac_b_ex.fe_group, gdp));
}
- len = ext4_free_blks_count(sb, gdp) - ac->ac_b_ex.fe_len;
- ext4_free_blks_set(sb, gdp, len);
+ len = ext4_free_group_clusters(sb, gdp) - ac->ac_b_ex.fe_len;
+ ext4_free_group_clusters_set(sb, gdp, len);
gdp->bg_checksum = ext4_group_desc_csum(sbi, ac->ac_b_ex.fe_group, gdp);
ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
- percpu_counter_sub(&sbi->s_freeblocks_counter, ac->ac_b_ex.fe_len);
+ percpu_counter_sub(&sbi->s_freeclusters_counter, ac->ac_b_ex.fe_len);
/*
* Now reduce the dirty block count also. Should not go negative
*/
if (!(ac->ac_flags & EXT4_MB_DELALLOC_RESERVED))
/* release all the reserved blocks if non delalloc */
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, reserv_blks);
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
+ reserv_clstrs);
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi,
ac->ac_b_ex.fe_group);
atomic_sub(ac->ac_b_ex.fe_len,
- &sbi->s_flex_groups[flex_group].free_blocks);
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
@@ -2886,6 +2908,7 @@
ext4_mb_normalize_request(struct ext4_allocation_context *ac,
struct ext4_allocation_request *ar)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
int bsbits, max;
ext4_lblk_t end;
loff_t size, orig_size, start_off;
@@ -2916,7 +2939,7 @@
/* first, let's learn actual file size
* given current request is allocated */
- size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
+ size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len);
size = size << bsbits;
if (size < i_size_read(ac->ac_inode))
size = i_size_read(ac->ac_inode);
@@ -2988,7 +3011,8 @@
continue;
}
- pa_end = pa->pa_lstart + pa->pa_len;
+ pa_end = pa->pa_lstart + EXT4_C2B(EXT4_SB(ac->ac_sb),
+ pa->pa_len);
/* PA must not overlap original request */
BUG_ON(!(ac->ac_o_ex.fe_logical >= pa_end ||
@@ -3018,9 +3042,11 @@
rcu_read_lock();
list_for_each_entry_rcu(pa, &ei->i_prealloc_list, pa_inode_list) {
ext4_lblk_t pa_end;
+
spin_lock(&pa->pa_lock);
if (pa->pa_deleted == 0) {
- pa_end = pa->pa_lstart + pa->pa_len;
+ pa_end = pa->pa_lstart + EXT4_C2B(EXT4_SB(ac->ac_sb),
+ pa->pa_len);
BUG_ON(!(start >= pa_end || end <= pa->pa_lstart));
}
spin_unlock(&pa->pa_lock);
@@ -3036,14 +3062,14 @@
}
BUG_ON(start + size <= ac->ac_o_ex.fe_logical &&
start > ac->ac_o_ex.fe_logical);
- BUG_ON(size <= 0 || size > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+ BUG_ON(size <= 0 || size > EXT4_CLUSTERS_PER_GROUP(ac->ac_sb));
/* now prepare goal request */
/* XXX: is it better to align blocks WRT to logical
* placement or satisfy big request as is */
ac->ac_g_ex.fe_logical = start;
- ac->ac_g_ex.fe_len = size;
+ ac->ac_g_ex.fe_len = EXT4_NUM_B2C(sbi, size);
/* define goal start in order to merge */
if (ar->pright && (ar->lright == (start + size))) {
@@ -3112,14 +3138,16 @@
static void ext4_mb_use_inode_pa(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
ext4_fsblk_t start;
ext4_fsblk_t end;
int len;
/* found preallocated blocks, use them */
start = pa->pa_pstart + (ac->ac_o_ex.fe_logical - pa->pa_lstart);
- end = min(pa->pa_pstart + pa->pa_len, start + ac->ac_o_ex.fe_len);
- len = end - start;
+ end = min(pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len),
+ start + EXT4_C2B(sbi, ac->ac_o_ex.fe_len));
+ len = EXT4_NUM_B2C(sbi, end - start);
ext4_get_group_no_and_offset(ac->ac_sb, start, &ac->ac_b_ex.fe_group,
&ac->ac_b_ex.fe_start);
ac->ac_b_ex.fe_len = len;
@@ -3127,7 +3155,7 @@
ac->ac_pa = pa;
BUG_ON(start < pa->pa_pstart);
- BUG_ON(start + len > pa->pa_pstart + pa->pa_len);
+ BUG_ON(end > pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len));
BUG_ON(pa->pa_free < len);
pa->pa_free -= len;
@@ -3193,6 +3221,7 @@
static noinline_for_stack int
ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
int order, i;
struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
struct ext4_locality_group *lg;
@@ -3210,12 +3239,14 @@
/* all fields in this condition don't change,
* so we can skip locking for them */
if (ac->ac_o_ex.fe_logical < pa->pa_lstart ||
- ac->ac_o_ex.fe_logical >= pa->pa_lstart + pa->pa_len)
+ ac->ac_o_ex.fe_logical >= (pa->pa_lstart +
+ EXT4_C2B(sbi, pa->pa_len)))
continue;
/* non-extent files can't have physical blocks past 2^32 */
if (!(ext4_test_inode_flag(ac->ac_inode, EXT4_INODE_EXTENTS)) &&
- pa->pa_pstart + pa->pa_len > EXT4_MAX_BLOCK_FILE_PHYS)
+ (pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len) >
+ EXT4_MAX_BLOCK_FILE_PHYS))
continue;
/* found preallocated blocks, use them */
@@ -3291,7 +3322,7 @@
while (n) {
entry = rb_entry(n, struct ext4_free_data, node);
- ext4_set_bits(bitmap, entry->start_blk, entry->count);
+ ext4_set_bits(bitmap, entry->start_cluster, entry->count);
n = rb_next(n);
}
return;
@@ -3312,7 +3343,6 @@
ext4_group_t groupnr;
ext4_grpblk_t start;
int preallocated = 0;
- int count = 0;
int len;
/* all form of preallocation discards first load group,
@@ -3335,7 +3365,6 @@
BUG_ON(groupnr != group);
ext4_set_bits(bitmap, start, len);
preallocated += len;
- count++;
}
mb_debug(1, "prellocated %u for group %u\n", preallocated, group);
}
@@ -3412,6 +3441,7 @@
ext4_mb_new_inode_pa(struct ext4_allocation_context *ac)
{
struct super_block *sb = ac->ac_sb;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_prealloc_space *pa;
struct ext4_group_info *grp;
struct ext4_inode_info *ei;
@@ -3443,16 +3473,18 @@
winl = ac->ac_o_ex.fe_logical - ac->ac_g_ex.fe_logical;
/* also, we should cover whole original request */
- wins = ac->ac_b_ex.fe_len - ac->ac_o_ex.fe_len;
+ wins = EXT4_C2B(sbi, ac->ac_b_ex.fe_len - ac->ac_o_ex.fe_len);
/* the smallest one defines real window */
win = min(winl, wins);
- offs = ac->ac_o_ex.fe_logical % ac->ac_b_ex.fe_len;
+ offs = ac->ac_o_ex.fe_logical %
+ EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
if (offs && offs < win)
win = offs;
- ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical - win;
+ ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical -
+ EXT4_B2C(sbi, win);
BUG_ON(ac->ac_o_ex.fe_logical < ac->ac_b_ex.fe_logical);
BUG_ON(ac->ac_o_ex.fe_len > ac->ac_b_ex.fe_len);
}
@@ -3477,7 +3509,7 @@
trace_ext4_mb_new_inode_pa(ac, pa);
ext4_mb_use_inode_pa(ac, pa);
- atomic_add(pa->pa_free, &EXT4_SB(sb)->s_mb_preallocated);
+ atomic_add(pa->pa_free, &sbi->s_mb_preallocated);
ei = EXT4_I(ac->ac_inode);
grp = ext4_get_group_info(sb, ac->ac_b_ex.fe_group);
@@ -3592,7 +3624,7 @@
BUG_ON(pa->pa_deleted == 0);
ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
- grp_blk_start = pa->pa_pstart - bit;
+ grp_blk_start = pa->pa_pstart - EXT4_C2B(sbi, bit);
BUG_ON(group != e4b->bd_group && pa->pa_len != 0);
end = bit + pa->pa_len;
@@ -3607,7 +3639,8 @@
free += next - bit;
trace_ext4_mballoc_discard(sb, NULL, group, bit, next - bit);
- trace_ext4_mb_release_inode_pa(pa, grp_blk_start + bit,
+ trace_ext4_mb_release_inode_pa(pa, (grp_blk_start +
+ EXT4_C2B(sbi, bit)),
next - bit);
mb_free_blocks(pa->pa_inode, e4b, bit, next - bit);
bit = next + 1;
@@ -3690,7 +3723,7 @@
}
if (needed == 0)
- needed = EXT4_BLOCKS_PER_GROUP(sb) + 1;
+ needed = EXT4_CLUSTERS_PER_GROUP(sb) + 1;
INIT_LIST_HEAD(&list);
repeat:
@@ -3958,7 +3991,7 @@
if (unlikely(ac->ac_flags & EXT4_MB_HINT_GOAL_ONLY))
return;
- size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
+ size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len);
isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1)
>> bsbits;
@@ -3969,6 +4002,11 @@
return;
}
+ if (sbi->s_mb_group_prealloc <= 0) {
+ ac->ac_flags |= EXT4_MB_STREAM_ALLOC;
+ return;
+ }
+
/* don't use group allocation for large files */
size = max(size, isize);
if (size > sbi->s_mb_stream_request) {
@@ -4007,8 +4045,8 @@
len = ar->len;
/* just a dirty hack to filter too big requests */
- if (len >= EXT4_BLOCKS_PER_GROUP(sb) - 10)
- len = EXT4_BLOCKS_PER_GROUP(sb) - 10;
+ if (len >= EXT4_CLUSTERS_PER_GROUP(sb) - 10)
+ len = EXT4_CLUSTERS_PER_GROUP(sb) - 10;
/* start searching from the goal */
goal = ar->goal;
@@ -4019,18 +4057,15 @@
/* set up allocation goals */
memset(ac, 0, sizeof(struct ext4_allocation_context));
- ac->ac_b_ex.fe_logical = ar->logical;
+ ac->ac_b_ex.fe_logical = ar->logical & ~(sbi->s_cluster_ratio - 1);
ac->ac_status = AC_STATUS_CONTINUE;
ac->ac_sb = sb;
ac->ac_inode = ar->inode;
- ac->ac_o_ex.fe_logical = ar->logical;
+ ac->ac_o_ex.fe_logical = ac->ac_b_ex.fe_logical;
ac->ac_o_ex.fe_group = group;
ac->ac_o_ex.fe_start = block;
ac->ac_o_ex.fe_len = len;
- ac->ac_g_ex.fe_logical = ar->logical;
- ac->ac_g_ex.fe_group = group;
- ac->ac_g_ex.fe_start = block;
- ac->ac_g_ex.fe_len = len;
+ ac->ac_g_ex = ac->ac_o_ex;
ac->ac_flags = ar->flags;
/* we have to define context: we'll we work with a file or
@@ -4182,13 +4217,14 @@
*/
static int ext4_mb_release_context(struct ext4_allocation_context *ac)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
struct ext4_prealloc_space *pa = ac->ac_pa;
if (pa) {
if (pa->pa_type == MB_GROUP_PA) {
/* see comment in ext4_mb_use_group_pa() */
spin_lock(&pa->pa_lock);
- pa->pa_pstart += ac->ac_b_ex.fe_len;
- pa->pa_lstart += ac->ac_b_ex.fe_len;
+ pa->pa_pstart += EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
+ pa->pa_lstart += EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
pa->pa_free -= ac->ac_b_ex.fe_len;
pa->pa_len -= ac->ac_b_ex.fe_len;
spin_unlock(&pa->pa_lock);
@@ -4249,13 +4285,17 @@
struct super_block *sb;
ext4_fsblk_t block = 0;
unsigned int inquota = 0;
- unsigned int reserv_blks = 0;
+ unsigned int reserv_clstrs = 0;
sb = ar->inode->i_sb;
sbi = EXT4_SB(sb);
trace_ext4_request_blocks(ar);
+ /* Allow to use superuser reservation for quota file */
+ if (IS_NOQUOTA(ar->inode))
+ ar->flags |= EXT4_MB_USE_ROOT_BLOCKS;
+
/*
* For delayed allocation, we could skip the ENOSPC and
* EDQUOT check, as blocks and quotas have been already
@@ -4269,7 +4309,7 @@
* and verify allocation doesn't exceed the quota limits.
*/
while (ar->len &&
- ext4_claim_free_blocks(sbi, ar->len, ar->flags)) {
+ ext4_claim_free_clusters(sbi, ar->len, ar->flags)) {
/* let others to free the space */
yield();
@@ -4279,12 +4319,14 @@
*errp = -ENOSPC;
return 0;
}
- reserv_blks = ar->len;
+ reserv_clstrs = ar->len;
if (ar->flags & EXT4_MB_USE_ROOT_BLOCKS) {
- dquot_alloc_block_nofail(ar->inode, ar->len);
+ dquot_alloc_block_nofail(ar->inode,
+ EXT4_C2B(sbi, ar->len));
} else {
while (ar->len &&
- dquot_alloc_block(ar->inode, ar->len)) {
+ dquot_alloc_block(ar->inode,
+ EXT4_C2B(sbi, ar->len))) {
ar->flags |= EXT4_MB_HINT_NOPREALLOC;
ar->len--;
@@ -4328,7 +4370,7 @@
ext4_mb_new_preallocation(ac);
}
if (likely(ac->ac_status == AC_STATUS_FOUND)) {
- *errp = ext4_mb_mark_diskspace_used(ac, handle, reserv_blks);
+ *errp = ext4_mb_mark_diskspace_used(ac, handle, reserv_clstrs);
if (*errp == -EAGAIN) {
/*
* drop the reference that we took
@@ -4364,13 +4406,13 @@
if (ac)
kmem_cache_free(ext4_ac_cachep, ac);
if (inquota && ar->len < inquota)
- dquot_free_block(ar->inode, inquota - ar->len);
+ dquot_free_block(ar->inode, EXT4_C2B(sbi, inquota - ar->len));
if (!ar->len) {
if (!ext4_test_inode_state(ar->inode,
EXT4_STATE_DELALLOC_RESERVED))
/* release all the reserved blocks if non delalloc */
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
- reserv_blks);
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
+ reserv_clstrs);
}
trace_ext4_allocate_blocks(ar, (unsigned long long)block);
@@ -4388,7 +4430,7 @@
{
if ((entry1->t_tid == entry2->t_tid) &&
(entry1->group == entry2->group) &&
- ((entry1->start_blk + entry1->count) == entry2->start_blk))
+ ((entry1->start_cluster + entry1->count) == entry2->start_cluster))
return 1;
return 0;
}
@@ -4398,7 +4440,7 @@
struct ext4_free_data *new_entry)
{
ext4_group_t group = e4b->bd_group;
- ext4_grpblk_t block;
+ ext4_grpblk_t cluster;
struct ext4_free_data *entry;
struct ext4_group_info *db = e4b->bd_info;
struct super_block *sb = e4b->bd_sb;
@@ -4411,7 +4453,7 @@
BUG_ON(e4b->bd_buddy_page == NULL);
new_node = &new_entry->node;
- block = new_entry->start_blk;
+ cluster = new_entry->start_cluster;
if (!*n) {
/* first free block exent. We need to
@@ -4425,13 +4467,14 @@
while (*n) {
parent = *n;
entry = rb_entry(parent, struct ext4_free_data, node);
- if (block < entry->start_blk)
+ if (cluster < entry->start_cluster)
n = &(*n)->rb_left;
- else if (block >= (entry->start_blk + entry->count))
+ else if (cluster >= (entry->start_cluster + entry->count))
n = &(*n)->rb_right;
else {
ext4_grp_locked_error(sb, group, 0,
- ext4_group_first_block_no(sb, group) + block,
+ ext4_group_first_block_no(sb, group) +
+ EXT4_C2B(sbi, cluster),
"Block already on to-be-freed list");
return 0;
}
@@ -4445,7 +4488,7 @@
if (node) {
entry = rb_entry(node, struct ext4_free_data, node);
if (can_merge(entry, new_entry)) {
- new_entry->start_blk = entry->start_blk;
+ new_entry->start_cluster = entry->start_cluster;
new_entry->count += entry->count;
rb_erase(node, &(db->bb_free_root));
spin_lock(&sbi->s_md_lock);
@@ -4496,6 +4539,7 @@
ext4_group_t block_group;
struct ext4_sb_info *sbi;
struct ext4_buddy e4b;
+ unsigned int count_clusters;
int err = 0;
int ret;
@@ -4544,6 +4588,38 @@
if (!ext4_should_writeback_data(inode))
flags |= EXT4_FREE_BLOCKS_METADATA;
+ /*
+ * If the extent to be freed does not begin on a cluster
+ * boundary, we need to deal with partial clusters at the
+ * beginning and end of the extent. Normally we will free
+ * blocks at the beginning or the end unless we are explicitly
+ * requested to avoid doing so.
+ */
+ overflow = block & (sbi->s_cluster_ratio - 1);
+ if (overflow) {
+ if (flags & EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER) {
+ overflow = sbi->s_cluster_ratio - overflow;
+ block += overflow;
+ if (count > overflow)
+ count -= overflow;
+ else
+ return;
+ } else {
+ block -= overflow;
+ count += overflow;
+ }
+ }
+ overflow = count & (sbi->s_cluster_ratio - 1);
+ if (overflow) {
+ if (flags & EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER) {
+ if (count > overflow)
+ count -= overflow;
+ else
+ return;
+ } else
+ count += sbi->s_cluster_ratio - overflow;
+ }
+
do_more:
overflow = 0;
ext4_get_group_no_and_offset(sb, block, &block_group, &bit);
@@ -4552,10 +4628,12 @@
* Check to see if we are freeing blocks across a group
* boundary.
*/
- if (bit + count > EXT4_BLOCKS_PER_GROUP(sb)) {
- overflow = bit + count - EXT4_BLOCKS_PER_GROUP(sb);
+ if (EXT4_C2B(sbi, bit) + count > EXT4_BLOCKS_PER_GROUP(sb)) {
+ overflow = EXT4_C2B(sbi, bit) + count -
+ EXT4_BLOCKS_PER_GROUP(sb);
count -= overflow;
}
+ count_clusters = EXT4_B2C(sbi, count);
bitmap_bh = ext4_read_block_bitmap(sb, block_group);
if (!bitmap_bh) {
err = -EIO;
@@ -4570,9 +4648,9 @@
if (in_range(ext4_block_bitmap(sb, gdp), block, count) ||
in_range(ext4_inode_bitmap(sb, gdp), block, count) ||
in_range(block, ext4_inode_table(sb, gdp),
- EXT4_SB(sb)->s_itb_per_group) ||
+ EXT4_SB(sb)->s_itb_per_group) ||
in_range(block + count - 1, ext4_inode_table(sb, gdp),
- EXT4_SB(sb)->s_itb_per_group)) {
+ EXT4_SB(sb)->s_itb_per_group)) {
ext4_error(sb, "Freeing blocks in system zone - "
"Block = %llu, count = %lu", block, count);
@@ -4597,11 +4675,11 @@
#ifdef AGGRESSIVE_CHECK
{
int i;
- for (i = 0; i < count; i++)
+ for (i = 0; i < count_clusters; i++)
BUG_ON(!mb_test_bit(bit + i, bitmap_bh->b_data));
}
#endif
- trace_ext4_mballoc_free(sb, inode, block_group, bit, count);
+ trace_ext4_mballoc_free(sb, inode, block_group, bit, count_clusters);
err = ext4_mb_load_buddy(sb, block_group, &e4b);
if (err)
@@ -4618,13 +4696,13 @@
err = -ENOMEM;
goto error_return;
}
- new_entry->start_blk = bit;
+ new_entry->start_cluster = bit;
new_entry->group = block_group;
- new_entry->count = count;
+ new_entry->count = count_clusters;
new_entry->t_tid = handle->h_transaction->t_tid;
ext4_lock_group(sb, block_group);
- mb_clear_bits(bitmap_bh->b_data, bit, count);
+ mb_clear_bits(bitmap_bh->b_data, bit, count_clusters);
ext4_mb_free_metadata(handle, &e4b, new_entry);
} else {
/* need to update group_info->bb_free and bitmap
@@ -4632,25 +4710,29 @@
* them with group lock_held
*/
ext4_lock_group(sb, block_group);
- mb_clear_bits(bitmap_bh->b_data, bit, count);
- mb_free_blocks(inode, &e4b, bit, count);
+ mb_clear_bits(bitmap_bh->b_data, bit, count_clusters);
+ mb_free_blocks(inode, &e4b, bit, count_clusters);
}
- ret = ext4_free_blks_count(sb, gdp) + count;
- ext4_free_blks_set(sb, gdp, ret);
+ ret = ext4_free_group_clusters(sb, gdp) + count_clusters;
+ ext4_free_group_clusters_set(sb, gdp, ret);
gdp->bg_checksum = ext4_group_desc_csum(sbi, block_group, gdp);
ext4_unlock_group(sb, block_group);
- percpu_counter_add(&sbi->s_freeblocks_counter, count);
+ percpu_counter_add(&sbi->s_freeclusters_counter, count_clusters);
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(count, &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(count_clusters,
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
freed += count;
+ if (!(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
+ dquot_free_block(inode, EXT4_C2B(sbi, count_clusters));
+
/* We dirtied the bitmap block */
BUFFER_TRACE(bitmap_bh, "dirtied bitmap block");
err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
@@ -4669,8 +4751,6 @@
}
ext4_mark_super_dirty(sb);
error_return:
- if (freed && !(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
- dquot_free_block(inode, freed);
brelse(bitmap_bh);
ext4_std_error(sb, err);
return;
@@ -4778,16 +4858,17 @@
ext4_lock_group(sb, block_group);
mb_clear_bits(bitmap_bh->b_data, bit, count);
mb_free_blocks(NULL, &e4b, bit, count);
- blk_free_count = blocks_freed + ext4_free_blks_count(sb, desc);
- ext4_free_blks_set(sb, desc, blk_free_count);
+ blk_free_count = blocks_freed + ext4_free_group_clusters(sb, desc);
+ ext4_free_group_clusters_set(sb, desc, blk_free_count);
desc->bg_checksum = ext4_group_desc_csum(sbi, block_group, desc);
ext4_unlock_group(sb, block_group);
- percpu_counter_add(&sbi->s_freeblocks_counter, blocks_freed);
+ percpu_counter_add(&sbi->s_freeclusters_counter,
+ EXT4_B2C(sbi, blocks_freed));
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(blocks_freed,
- &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(EXT4_B2C(sbi, blocks_freed),
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
@@ -4948,7 +5029,7 @@
struct ext4_group_info *grp;
ext4_group_t first_group, last_group;
ext4_group_t group, ngroups = ext4_get_groups_count(sb);
- ext4_grpblk_t cnt = 0, first_block, last_block;
+ ext4_grpblk_t cnt = 0, first_cluster, last_cluster;
uint64_t start, len, minlen, trimmed = 0;
ext4_fsblk_t first_data_blk =
le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block);
@@ -4958,7 +5039,7 @@
len = range->len >> sb->s_blocksize_bits;
minlen = range->minlen >> sb->s_blocksize_bits;
- if (unlikely(minlen > EXT4_BLOCKS_PER_GROUP(sb)))
+ if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)))
return -EINVAL;
if (start + len <= first_data_blk)
goto out;
@@ -4969,11 +5050,11 @@
/* Determine first and last group to examine based on start and len */
ext4_get_group_no_and_offset(sb, (ext4_fsblk_t) start,
- &first_group, &first_block);
+ &first_group, &first_cluster);
ext4_get_group_no_and_offset(sb, (ext4_fsblk_t) (start + len),
- &last_group, &last_block);
+ &last_group, &last_cluster);
last_group = (last_group > ngroups - 1) ? ngroups - 1 : last_group;
- last_block = EXT4_BLOCKS_PER_GROUP(sb);
+ last_cluster = EXT4_CLUSTERS_PER_GROUP(sb);
if (first_group > last_group)
return -EINVAL;
@@ -4993,20 +5074,20 @@
* change it for the last group in which case start +
* len < EXT4_BLOCKS_PER_GROUP(sb).
*/
- if (first_block + len < EXT4_BLOCKS_PER_GROUP(sb))
- last_block = first_block + len;
- len -= last_block - first_block;
+ if (first_cluster + len < EXT4_CLUSTERS_PER_GROUP(sb))
+ last_cluster = first_cluster + len;
+ len -= last_cluster - first_cluster;
if (grp->bb_free >= minlen) {
- cnt = ext4_trim_all_free(sb, group, first_block,
- last_block, minlen);
+ cnt = ext4_trim_all_free(sb, group, first_cluster,
+ last_cluster, minlen);
if (cnt < 0) {
ret = cnt;
break;
}
}
trimmed += cnt;
- first_block = 0;
+ first_cluster = 0;
}
range->len = trimmed * sb->s_blocksize;
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index 9d4a636..47705f3 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -106,7 +106,7 @@
ext4_group_t group;
/* free block extent */
- ext4_grpblk_t start_blk;
+ ext4_grpblk_t start_cluster;
ext4_grpblk_t count;
/* transaction which freed this extent */
@@ -139,9 +139,9 @@
struct ext4_free_extent {
ext4_lblk_t fe_logical;
- ext4_grpblk_t fe_start;
+ ext4_grpblk_t fe_start; /* In cluster units */
ext4_group_t fe_group;
- ext4_grpblk_t fe_len;
+ ext4_grpblk_t fe_len; /* In cluster units */
};
/*
@@ -175,7 +175,7 @@
/* the best found extent */
struct ext4_free_extent ac_b_ex;
- /* copy of the bext found extent taken before preallocation efforts */
+ /* copy of the best found extent taken before preallocation efforts */
struct ext4_free_extent ac_f_ex;
/* number of iterations done. we have to track to limit searching */
@@ -216,6 +216,7 @@
static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
struct ext4_free_extent *fex)
{
- return ext4_group_first_block_no(sb, fex->fe_group) + fex->fe_start;
+ return ext4_group_first_block_no(sb, fex->fe_group) +
+ (fex->fe_start << EXT4_SB(sb)->s_cluster_bits);
}
#endif
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index b57b98f..16ac228 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -15,19 +15,18 @@
#include <linux/module.h>
#include <linux/slab.h>
#include "ext4_jbd2.h"
-#include "ext4_extents.h"
/*
* The contiguous blocks details which can be
* represented by a single extent
*/
-struct list_blocks_struct {
- ext4_lblk_t first_block, last_block;
+struct migrate_struct {
+ ext4_lblk_t first_block, last_block, curr_block;
ext4_fsblk_t first_pblock, last_pblock;
};
static int finish_range(handle_t *handle, struct inode *inode,
- struct list_blocks_struct *lb)
+ struct migrate_struct *lb)
{
int retval = 0, needed;
@@ -87,8 +86,7 @@
}
static int update_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t blk_num,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock, struct migrate_struct *lb)
{
int retval;
/*
@@ -96,9 +94,10 @@
*/
if (lb->first_pblock &&
(lb->last_pblock+1 == pblock) &&
- (lb->last_block+1 == blk_num)) {
+ (lb->last_block+1 == lb->curr_block)) {
lb->last_pblock = pblock;
- lb->last_block = blk_num;
+ lb->last_block = lb->curr_block;
+ lb->curr_block++;
return 0;
}
/*
@@ -106,64 +105,49 @@
*/
retval = finish_range(handle, inode, lb);
lb->first_pblock = lb->last_pblock = pblock;
- lb->first_block = lb->last_block = blk_num;
-
+ lb->first_block = lb->last_block = lb->curr_block;
+ lb->curr_block++;
return retval;
}
static int update_ind_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t *blk_nump,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock,
+ struct migrate_struct *lb)
{
struct buffer_head *bh;
__le32 *i_data;
int i, retval = 0;
- ext4_lblk_t blk_count = *blk_nump;
unsigned long max_entries = inode->i_sb->s_blocksize >> 2;
- if (!pblock) {
- /* Only update the file block number */
- *blk_nump += max_entries;
- return 0;
- }
-
bh = sb_bread(inode->i_sb, pblock);
if (!bh)
return -EIO;
i_data = (__le32 *)bh->b_data;
- for (i = 0; i < max_entries; i++, blk_count++) {
+ for (i = 0; i < max_entries; i++) {
if (i_data[i]) {
retval = update_extent_range(handle, inode,
- le32_to_cpu(i_data[i]),
- blk_count, lb);
+ le32_to_cpu(i_data[i]), lb);
if (retval)
break;
+ } else {
+ lb->curr_block++;
}
}
-
- /* Update the file block number */
- *blk_nump = blk_count;
put_bh(bh);
return retval;
}
static int update_dind_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t *blk_nump,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock,
+ struct migrate_struct *lb)
{
struct buffer_head *bh;
__le32 *i_data;
int i, retval = 0;
- ext4_lblk_t blk_count = *blk_nump;
unsigned long max_entries = inode->i_sb->s_blocksize >> 2;
- if (!pblock) {
- /* Only update the file block number */
- *blk_nump += max_entries * max_entries;
- return 0;
- }
bh = sb_bread(inode->i_sb, pblock);
if (!bh)
return -EIO;
@@ -172,38 +156,28 @@
for (i = 0; i < max_entries; i++) {
if (i_data[i]) {
retval = update_ind_extent_range(handle, inode,
- le32_to_cpu(i_data[i]),
- &blk_count, lb);
+ le32_to_cpu(i_data[i]), lb);
if (retval)
break;
} else {
/* Only update the file block number */
- blk_count += max_entries;
+ lb->curr_block += max_entries;
}
}
-
- /* Update the file block number */
- *blk_nump = blk_count;
put_bh(bh);
return retval;
}
static int update_tind_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t *blk_nump,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock,
+ struct migrate_struct *lb)
{
struct buffer_head *bh;
__le32 *i_data;
int i, retval = 0;
- ext4_lblk_t blk_count = *blk_nump;
unsigned long max_entries = inode->i_sb->s_blocksize >> 2;
- if (!pblock) {
- /* Only update the file block number */
- *blk_nump += max_entries * max_entries * max_entries;
- return 0;
- }
bh = sb_bread(inode->i_sb, pblock);
if (!bh)
return -EIO;
@@ -212,16 +186,14 @@
for (i = 0; i < max_entries; i++) {
if (i_data[i]) {
retval = update_dind_extent_range(handle, inode,
- le32_to_cpu(i_data[i]),
- &blk_count, lb);
+ le32_to_cpu(i_data[i]), lb);
if (retval)
break;
- } else
+ } else {
/* Only update the file block number */
- blk_count += max_entries * max_entries;
+ lb->curr_block += max_entries * max_entries;
+ }
}
- /* Update the file block number */
- *blk_nump = blk_count;
put_bh(bh);
return retval;
@@ -462,12 +434,12 @@
handle_t *handle;
int retval = 0, i;
__le32 *i_data;
- ext4_lblk_t blk_count = 0;
struct ext4_inode_info *ei;
struct inode *tmp_inode = NULL;
- struct list_blocks_struct lb;
+ struct migrate_struct lb;
unsigned long max_entries;
__u32 goal;
+ uid_t owner[2];
/*
* If the filesystem does not support extents, or the inode
@@ -495,10 +467,12 @@
}
goal = (((inode->i_ino - 1) / EXT4_INODES_PER_GROUP(inode->i_sb)) *
EXT4_INODES_PER_GROUP(inode->i_sb)) + 1;
+ owner[0] = inode->i_uid;
+ owner[1] = inode->i_gid;
tmp_inode = ext4_new_inode(handle, inode->i_sb->s_root->d_inode,
- S_IFREG, NULL, goal);
+ S_IFREG, NULL, goal, owner);
if (IS_ERR(tmp_inode)) {
- retval = -ENOMEM;
+ retval = PTR_ERR(inode);
ext4_journal_stop(handle);
return retval;
}
@@ -507,7 +481,7 @@
* Set the i_nlink to zero so it will be deleted later
* when we drop inode reference.
*/
- tmp_inode->i_nlink = 0;
+ clear_nlink(tmp_inode);
ext4_ext_tree_init(handle, tmp_inode);
ext4_orphan_add(handle, tmp_inode);
@@ -551,35 +525,32 @@
/* 32 bit block address 4 bytes */
max_entries = inode->i_sb->s_blocksize >> 2;
- for (i = 0; i < EXT4_NDIR_BLOCKS; i++, blk_count++) {
+ for (i = 0; i < EXT4_NDIR_BLOCKS; i++) {
if (i_data[i]) {
retval = update_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[i]),
- blk_count, &lb);
+ le32_to_cpu(i_data[i]), &lb);
if (retval)
goto err_out;
- }
+ } else
+ lb.curr_block++;
}
if (i_data[EXT4_IND_BLOCK]) {
retval = update_ind_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[EXT4_IND_BLOCK]),
- &blk_count, &lb);
+ le32_to_cpu(i_data[EXT4_IND_BLOCK]), &lb);
if (retval)
goto err_out;
} else
- blk_count += max_entries;
+ lb.curr_block += max_entries;
if (i_data[EXT4_DIND_BLOCK]) {
retval = update_dind_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[EXT4_DIND_BLOCK]),
- &blk_count, &lb);
+ le32_to_cpu(i_data[EXT4_DIND_BLOCK]), &lb);
if (retval)
goto err_out;
} else
- blk_count += max_entries * max_entries;
+ lb.curr_block += max_entries * max_entries;
if (i_data[EXT4_TIND_BLOCK]) {
retval = update_tind_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[EXT4_TIND_BLOCK]),
- &blk_count, &lb);
+ le32_to_cpu(i_data[EXT4_TIND_BLOCK]), &lb);
if (retval)
goto err_out;
}
diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c
index 9bdef3f..7ea4ba4 100644
--- a/fs/ext4/mmp.c
+++ b/fs/ext4/mmp.c
@@ -109,7 +109,7 @@
mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval);
bdevname(bh->b_bdev, mmp->mmp_bdevname);
- memcpy(mmp->mmp_nodename, init_utsname()->sysname,
+ memcpy(mmp->mmp_nodename, init_utsname()->nodename,
sizeof(mmp->mmp_nodename));
while (!kthread_should_stop()) {
@@ -125,8 +125,9 @@
* Don't spew too many error messages. Print one every
* (s_mmp_update_interval * 60) seconds.
*/
- if (retval && (failed_writes % 60) == 0) {
- ext4_error(sb, "Error writing to MMP block");
+ if (retval) {
+ if ((failed_writes % 60) == 0)
+ ext4_error(sb, "Error writing to MMP block");
failed_writes++;
}
@@ -295,7 +296,8 @@
/*
* write a new random sequence number.
*/
- mmp->mmp_seq = seq = cpu_to_le32(mmp_new_seq());
+ seq = mmp_new_seq();
+ mmp->mmp_seq = cpu_to_le32(seq);
retval = write_mmp_block(bh);
if (retval)
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index f57455a..c5826c6 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -17,7 +17,6 @@
#include <linux/quotaops.h>
#include <linux/slab.h>
#include "ext4_jbd2.h"
-#include "ext4_extents.h"
#include "ext4.h"
/**
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 1c924fa..aa4c782 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1586,7 +1586,7 @@
dxtrace(dx_show_index("node", frames[1].entries));
dxtrace(dx_show_index("node",
((struct dx_node *) bh2->b_data)->entries));
- err = ext4_handle_dirty_metadata(handle, inode, bh2);
+ err = ext4_handle_dirty_metadata(handle, dir, bh2);
if (err)
goto journal_error;
brelse (bh2);
@@ -1612,7 +1612,7 @@
if (err)
goto journal_error;
}
- err = ext4_handle_dirty_metadata(handle, inode, frames[0].bh);
+ err = ext4_handle_dirty_metadata(handle, dir, frames[0].bh);
if (err) {
ext4_std_error(inode->i_sb, err);
goto cleanup;
@@ -1694,7 +1694,7 @@
if (is_dx(inode) && inode->i_nlink > 1) {
/* limit is 16-bit i_links_count */
if (inode->i_nlink >= EXT4_LINK_MAX || inode->i_nlink == 2) {
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
EXT4_SET_RO_COMPAT_FEATURE(inode->i_sb,
EXT4_FEATURE_RO_COMPAT_DIR_NLINK);
}
@@ -1707,9 +1707,8 @@
*/
static void ext4_dec_count(handle_t *handle, struct inode *inode)
{
- drop_nlink(inode);
- if (S_ISDIR(inode->i_mode) && inode->i_nlink == 0)
- inc_nlink(inode);
+ if (!S_ISDIR(inode->i_mode) || inode->i_nlink > 2)
+ drop_nlink(inode);
}
@@ -1756,7 +1755,7 @@
if (IS_DIRSYNC(dir))
ext4_handle_sync(handle);
- inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0);
+ inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
inode->i_op = &ext4_file_inode_operations;
@@ -1792,7 +1791,7 @@
if (IS_DIRSYNC(dir))
ext4_handle_sync(handle);
- inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0);
+ inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
init_special_inode(inode, inode->i_mode, rdev);
@@ -1832,7 +1831,7 @@
ext4_handle_sync(handle);
inode = ext4_new_inode(handle, dir, S_IFDIR | mode,
- &dentry->d_name, 0);
+ &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_stop;
@@ -1861,9 +1860,9 @@
de->name_len = 2;
strcpy(de->name, "..");
ext4_set_de_type(dir->i_sb, de, S_IFDIR);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
BUFFER_TRACE(dir_block, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, dir, dir_block);
+ err = ext4_handle_dirty_metadata(handle, inode, dir_block);
if (err)
goto out_clear_inode;
err = ext4_mark_inode_dirty(handle, inode);
@@ -2214,7 +2213,7 @@
ext4_warning(inode->i_sb,
"Deleting nonexistent file (%lu), %d",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
retval = ext4_delete_entry(handle, dir, de, bh);
if (retval)
@@ -2279,7 +2278,7 @@
ext4_handle_sync(handle);
inode = ext4_new_inode(handle, dir, S_IFLNK|S_IRWXUGO,
- &dentry->d_name, 0);
+ &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_stop;
@@ -2530,7 +2529,7 @@
PARENT_INO(dir_bh->b_data, new_dir->i_sb->s_blocksize) =
cpu_to_le32(new_dir->i_ino);
BUFFER_TRACE(dir_bh, "call ext4_handle_dirty_metadata");
- retval = ext4_handle_dirty_metadata(handle, old_dir, dir_bh);
+ retval = ext4_handle_dirty_metadata(handle, old_inode, dir_bh);
if (retval) {
ext4_std_error(old_dir->i_sb, retval);
goto end_rename;
@@ -2539,7 +2538,7 @@
if (new_inode) {
/* checked empty_dir above, can't have another parent,
* ext4_dec_count() won't work for many-linked dirs */
- new_inode->i_nlink = 0;
+ clear_nlink(new_inode);
} else {
ext4_inc_count(handle, new_dir);
ext4_update_dx_flag(new_dir);
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index 92f38ee..7ce1d0b 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -70,7 +70,6 @@
void ext4_free_io_end(ext4_io_end_t *io)
{
int i;
- wait_queue_head_t *wq;
BUG_ON(!io);
if (io->page)
@@ -78,56 +77,43 @@
for (i = 0; i < io->num_io_pages; i++)
put_io_page(io->pages[i]);
io->num_io_pages = 0;
- wq = ext4_ioend_wq(io->inode);
- if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count) &&
- waitqueue_active(wq))
- wake_up_all(wq);
+ if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count))
+ wake_up_all(ext4_ioend_wq(io->inode));
kmem_cache_free(io_end_cachep, io);
}
/*
* check a range of space and convert unwritten extents to written.
+ *
+ * Called with inode->i_mutex; we depend on this when we manipulate
+ * io->flag, since we could otherwise race with ext4_flush_completed_IO()
*/
int ext4_end_io_nolock(ext4_io_end_t *io)
{
struct inode *inode = io->inode;
loff_t offset = io->offset;
ssize_t size = io->size;
- wait_queue_head_t *wq;
int ret = 0;
ext4_debug("ext4_end_io_nolock: io 0x%p from inode %lu,list->next 0x%p,"
"list->prev 0x%p\n",
io, inode->i_ino, io->list.next, io->list.prev);
- if (list_empty(&io->list))
- return ret;
-
- if (!(io->flag & EXT4_IO_END_UNWRITTEN))
- return ret;
-
ret = ext4_convert_unwritten_extents(inode, offset, size);
if (ret < 0) {
- printk(KERN_EMERG "%s: failed to convert unwritten "
- "extents to written extents, error is %d "
- "io is still on inode %lu aio dio list\n",
- __func__, ret, inode->i_ino);
- return ret;
+ ext4_msg(inode->i_sb, KERN_EMERG,
+ "failed to convert unwritten extents to written "
+ "extents -- potential data loss! "
+ "(inode %lu, offset %llu, size %zd, error %d)",
+ inode->i_ino, offset, size, ret);
}
if (io->iocb)
aio_complete(io->iocb, io->result, 0);
- /* clear the DIO AIO unwritten flag */
- if (io->flag & EXT4_IO_END_UNWRITTEN) {
- io->flag &= ~EXT4_IO_END_UNWRITTEN;
- /* Wake up anyone waiting on unwritten extent conversion */
- wq = ext4_ioend_wq(io->inode);
- if (atomic_dec_and_test(&EXT4_I(inode)->i_aiodio_unwritten) &&
- waitqueue_active(wq)) {
- wake_up_all(wq);
- }
- }
+ /* Wake up anyone waiting on unwritten extent conversion */
+ if (atomic_dec_and_test(&EXT4_I(inode)->i_aiodio_unwritten))
+ wake_up_all(ext4_ioend_wq(io->inode));
return ret;
}
@@ -140,9 +126,15 @@
struct inode *inode = io->inode;
struct ext4_inode_info *ei = EXT4_I(inode);
unsigned long flags;
- int ret;
+
+ spin_lock_irqsave(&ei->i_completed_io_lock, flags);
+ if (list_empty(&io->list)) {
+ spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
+ goto free;
+ }
if (!mutex_trylock(&inode->i_mutex)) {
+ spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
/*
* Requeue the work instead of waiting so that the work
* items queued after this can be processed.
@@ -159,17 +151,11 @@
io->flag |= EXT4_IO_END_QUEUED;
return;
}
- ret = ext4_end_io_nolock(io);
- if (ret < 0) {
- mutex_unlock(&inode->i_mutex);
- return;
- }
-
- spin_lock_irqsave(&ei->i_completed_io_lock, flags);
- if (!list_empty(&io->list))
- list_del_init(&io->list);
+ list_del_init(&io->list);
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
+ (void) ext4_end_io_nolock(io);
mutex_unlock(&inode->i_mutex);
+free:
ext4_free_io_end(io);
}
@@ -350,10 +336,8 @@
if ((io_end->num_io_pages >= MAX_IO_PAGES) &&
(io_end->pages[io_end->num_io_pages-1] != io_page))
goto submit_and_retry;
- if (buffer_uninit(bh) && !(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
- io_end->flag |= EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- }
+ if (buffer_uninit(bh))
+ ext4_set_io_unwritten_flag(inode, io_end);
io->io_end->size += bh->b_size;
io->io_next_block++;
ret = bio_add_page(io->io_bio, bh->b_page, bh->b_size, bh_offset(bh));
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 707d3f1..996780a 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -875,7 +875,7 @@
ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */
ext4_inode_table_set(sb, gdp, input->inode_table); /* LV FIXME */
- ext4_free_blks_set(sb, gdp, input->free_blocks_count);
+ ext4_free_group_clusters_set(sb, gdp, input->free_blocks_count);
ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb));
gdp->bg_flags = cpu_to_le16(EXT4_BG_INODE_ZEROED);
gdp->bg_checksum = ext4_group_desc_csum(sbi, input->group, gdp);
@@ -937,8 +937,8 @@
input->reserved_blocks);
/* Update the free space counts */
- percpu_counter_add(&sbi->s_freeblocks_counter,
- input->free_blocks_count);
+ percpu_counter_add(&sbi->s_freeclusters_counter,
+ EXT4_B2C(sbi, input->free_blocks_count));
percpu_counter_add(&sbi->s_freeinodes_counter,
EXT4_INODES_PER_GROUP(sb));
@@ -946,8 +946,8 @@
sbi->s_log_groups_per_flex) {
ext4_group_t flex_group;
flex_group = ext4_flex_group(sbi, input->group);
- atomic_add(input->free_blocks_count,
- &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(EXT4_B2C(sbi, input->free_blocks_count),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(EXT4_INODES_PER_GROUP(sb),
&sbi->s_flex_groups[flex_group].free_inodes);
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 44d0c8d..9953d80 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -45,6 +45,7 @@
#include <linux/freezer.h>
#include "ext4.h"
+#include "ext4_extents.h"
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
@@ -163,8 +164,8 @@
(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_table_hi) << 32 : 0);
}
-__u32 ext4_free_blks_count(struct super_block *sb,
- struct ext4_group_desc *bg)
+__u32 ext4_free_group_clusters(struct super_block *sb,
+ struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_free_blocks_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
@@ -219,8 +220,8 @@
bg->bg_inode_table_hi = cpu_to_le32(blk >> 32);
}
-void ext4_free_blks_set(struct super_block *sb,
- struct ext4_group_desc *bg, __u32 count)
+void ext4_free_group_clusters_set(struct super_block *sb,
+ struct ext4_group_desc *bg, __u32 count)
{
bg->bg_free_blocks_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
@@ -414,6 +415,22 @@
ext4_commit_super(sb, 1);
}
+/*
+ * The del_gendisk() function uninitializes the disk-specific data
+ * structures, including the bdi structure, without telling anyone
+ * else. Once this happens, any attempt to call mark_buffer_dirty()
+ * (for example, by ext4_commit_super), will cause a kernel OOPS.
+ * This is a kludge to prevent these oops until we can put in a proper
+ * hook in del_gendisk() to inform the VFS and file system layers.
+ */
+static int block_device_ejected(struct super_block *sb)
+{
+ struct inode *bd_inode = sb->s_bdev->bd_inode;
+ struct backing_dev_info *bdi = bd_inode->i_mapping->backing_dev_info;
+
+ return bdi->dev == NULL;
+}
+
/* Deal with the reporting of failure conditions on a filesystem such as
* inconsistencies detected or read IO failures.
@@ -821,10 +838,10 @@
brelse(sbi->s_group_desc[i]);
ext4_kvfree(sbi->s_group_desc);
ext4_kvfree(sbi->s_flex_groups);
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
+ percpu_counter_destroy(&sbi->s_freeclusters_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
- percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
+ percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
brelse(sbi->s_sbh);
#ifdef CONFIG_QUOTA
for (i = 0; i < MAXQUOTAS; i++)
@@ -1057,8 +1074,6 @@
seq_puts(seq, ",nouid32");
if (test_opt(sb, DEBUG) && !(def_mount_opts & EXT4_DEFM_DEBUG))
seq_puts(seq, ",debug");
- if (test_opt(sb, OLDALLOC))
- seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT4_FS_XATTR
if (test_opt(sb, XATTR_USER))
seq_puts(seq, ",user_xattr");
@@ -1567,10 +1582,12 @@
set_opt(sb, DEBUG);
break;
case Opt_oldalloc:
- set_opt(sb, OLDALLOC);
+ ext4_msg(sb, KERN_WARNING,
+ "Ignoring deprecated oldalloc option");
break;
case Opt_orlov:
- clear_opt(sb, OLDALLOC);
+ ext4_msg(sb, KERN_WARNING,
+ "Ignoring deprecated orlov option");
break;
#ifdef CONFIG_EXT4_FS_XATTR
case Opt_user_xattr:
@@ -1801,6 +1818,7 @@
break;
case Opt_nodelalloc:
clear_opt(sb, DELALLOC);
+ clear_opt2(sb, EXPLICIT_DELALLOC);
break;
case Opt_mblk_io_submit:
set_opt(sb, MBLK_IO_SUBMIT);
@@ -1817,6 +1835,7 @@
break;
case Opt_delalloc:
set_opt(sb, DELALLOC);
+ set_opt2(sb, EXPLICIT_DELALLOC);
break;
case Opt_block_validity:
set_opt(sb, BLOCK_VALIDITY);
@@ -1935,7 +1954,7 @@
res = MS_RDONLY;
}
if (read_only)
- return res;
+ goto done;
if (!(sbi->s_mount_state & EXT4_VALID_FS))
ext4_msg(sb, KERN_WARNING, "warning: mounting unchecked fs, "
"running e2fsck is recommended");
@@ -1966,6 +1985,7 @@
EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
ext4_commit_super(sb, 1);
+done:
if (test_opt(sb, DEBUG))
printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, "
"bpg=%lu, ipg=%lu, mo=%04x, mo2=%04x]\n",
@@ -2015,8 +2035,8 @@
flex_group = ext4_flex_group(sbi, i);
atomic_add(ext4_free_inodes_count(sb, gdp),
&sbi->s_flex_groups[flex_group].free_inodes);
- atomic_add(ext4_free_blks_count(sb, gdp),
- &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(ext4_free_group_clusters(sb, gdp),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(ext4_used_dirs_count(sb, gdp),
&sbi->s_flex_groups[flex_group].used_dirs);
}
@@ -2134,7 +2154,8 @@
if (NULL != first_not_zeroed)
*first_not_zeroed = grp;
- ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb));
+ ext4_free_blocks_count_set(sbi->s_es,
+ EXT4_C2B(sbi, ext4_count_free_clusters(sb)));
sbi->s_es->s_free_inodes_count =cpu_to_le32(ext4_count_free_inodes(sb));
return 1;
}
@@ -2454,7 +2475,8 @@
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%llu\n",
- (s64) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+ (s64) EXT4_C2B(sbi,
+ percpu_counter_sum(&sbi->s_dirtyclusters_counter)));
}
static ssize_t session_write_kbytes_show(struct ext4_attr *a,
@@ -2682,6 +2704,13 @@
return 0;
}
}
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_BIGALLOC) &&
+ !EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+ ext4_msg(sb, KERN_ERR,
+ "Can't support bigalloc feature without "
+ "extents feature\n");
+ return 0;
+ }
return 1;
}
@@ -3087,10 +3116,10 @@
char *cp;
const char *descr;
int ret = -ENOMEM;
- int blocksize;
+ int blocksize, clustersize;
unsigned int db_count;
unsigned int i;
- int needs_recovery, has_huge_files;
+ int needs_recovery, has_huge_files, has_bigalloc;
__u64 blocks_count;
int err;
unsigned int journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
@@ -3224,6 +3253,33 @@
&journal_ioprio, NULL, 0))
goto failed_mount;
+ if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
+ printk_once(KERN_WARNING "EXT4-fs: Warning: mounting "
+ "with data=journal disables delayed "
+ "allocation and O_DIRECT support!\n");
+ if (test_opt2(sb, EXPLICIT_DELALLOC)) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "both data=journal and delalloc");
+ goto failed_mount;
+ }
+ if (test_opt(sb, DIOREAD_NOLOCK)) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "both data=journal and delalloc");
+ goto failed_mount;
+ }
+ if (test_opt(sb, DELALLOC))
+ clear_opt(sb, DELALLOC);
+ }
+
+ blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
+ if (test_opt(sb, DIOREAD_NOLOCK)) {
+ if (blocksize < PAGE_SIZE) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "dioread_nolock if block size != PAGE_SIZE");
+ goto failed_mount;
+ }
+ }
+
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
(test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
@@ -3265,8 +3321,6 @@
if (!ext4_feature_set_ok(sb, (sb->s_flags & MS_RDONLY)))
goto failed_mount;
- blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
-
if (blocksize < EXT4_MIN_BLOCK_SIZE ||
blocksize > EXT4_MAX_BLOCK_SIZE) {
ext4_msg(sb, KERN_ERR,
@@ -3369,12 +3423,53 @@
sb->s_dirt = 1;
}
- if (sbi->s_blocks_per_group > blocksize * 8) {
- ext4_msg(sb, KERN_ERR,
- "#blocks per group too big: %lu",
- sbi->s_blocks_per_group);
- goto failed_mount;
+ /* Handle clustersize */
+ clustersize = BLOCK_SIZE << le32_to_cpu(es->s_log_cluster_size);
+ has_bigalloc = EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC);
+ if (has_bigalloc) {
+ if (clustersize < blocksize) {
+ ext4_msg(sb, KERN_ERR,
+ "cluster size (%d) smaller than "
+ "block size (%d)", clustersize, blocksize);
+ goto failed_mount;
+ }
+ sbi->s_cluster_bits = le32_to_cpu(es->s_log_cluster_size) -
+ le32_to_cpu(es->s_log_block_size);
+ sbi->s_clusters_per_group =
+ le32_to_cpu(es->s_clusters_per_group);
+ if (sbi->s_clusters_per_group > blocksize * 8) {
+ ext4_msg(sb, KERN_ERR,
+ "#clusters per group too big: %lu",
+ sbi->s_clusters_per_group);
+ goto failed_mount;
+ }
+ if (sbi->s_blocks_per_group !=
+ (sbi->s_clusters_per_group * (clustersize / blocksize))) {
+ ext4_msg(sb, KERN_ERR, "blocks per group (%lu) and "
+ "clusters per group (%lu) inconsistent",
+ sbi->s_blocks_per_group,
+ sbi->s_clusters_per_group);
+ goto failed_mount;
+ }
+ } else {
+ if (clustersize != blocksize) {
+ ext4_warning(sb, "fragment/cluster size (%d) != "
+ "block size (%d)", clustersize,
+ blocksize);
+ clustersize = blocksize;
+ }
+ if (sbi->s_blocks_per_group > blocksize * 8) {
+ ext4_msg(sb, KERN_ERR,
+ "#blocks per group too big: %lu",
+ sbi->s_blocks_per_group);
+ goto failed_mount;
+ }
+ sbi->s_clusters_per_group = sbi->s_blocks_per_group;
+ sbi->s_cluster_bits = 0;
}
+ sbi->s_cluster_ratio = clustersize / blocksize;
+
if (sbi->s_inodes_per_group > blocksize * 8) {
ext4_msg(sb, KERN_ERR,
"#inodes per group too big: %lu",
@@ -3446,10 +3541,8 @@
goto failed_mount;
}
-#ifdef CONFIG_PROC_FS
if (ext4_proc_root)
sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root);
-#endif
bgl_lock_init(sbi->s_blockgroup_lock);
@@ -3483,8 +3576,8 @@
sbi->s_err_report.function = print_daily_error_info;
sbi->s_err_report.data = (unsigned long) sb;
- err = percpu_counter_init(&sbi->s_freeblocks_counter,
- ext4_count_free_blocks(sb));
+ err = percpu_counter_init(&sbi->s_freeclusters_counter,
+ ext4_count_free_clusters(sb));
if (!err) {
err = percpu_counter_init(&sbi->s_freeinodes_counter,
ext4_count_free_inodes(sb));
@@ -3494,7 +3587,7 @@
ext4_count_dirs(sb));
}
if (!err) {
- err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
+ err = percpu_counter_init(&sbi->s_dirtyclusters_counter, 0);
}
if (err) {
ext4_msg(sb, KERN_ERR, "insufficient memory");
@@ -3609,13 +3702,13 @@
* The journal may have updated the bg summary counts, so we
* need to update the global counters.
*/
- percpu_counter_set(&sbi->s_freeblocks_counter,
- ext4_count_free_blocks(sb));
+ percpu_counter_set(&sbi->s_freeclusters_counter,
+ ext4_count_free_clusters(sb));
percpu_counter_set(&sbi->s_freeinodes_counter,
ext4_count_free_inodes(sb));
percpu_counter_set(&sbi->s_dirs_counter,
ext4_count_dirs(sb));
- percpu_counter_set(&sbi->s_dirtyblocks_counter, 0);
+ percpu_counter_set(&sbi->s_dirtyclusters_counter, 0);
no_journal:
/*
@@ -3679,25 +3772,6 @@
"available");
}
- if (test_opt(sb, DELALLOC) &&
- (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) {
- ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
- "requested data journaling mode");
- clear_opt(sb, DELALLOC);
- }
- if (test_opt(sb, DIOREAD_NOLOCK)) {
- if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
- ext4_msg(sb, KERN_WARNING, "Ignoring dioread_nolock "
- "option - requested data journaling mode");
- clear_opt(sb, DIOREAD_NOLOCK);
- }
- if (sb->s_blocksize < PAGE_SIZE) {
- ext4_msg(sb, KERN_WARNING, "Ignoring dioread_nolock "
- "option - block size is too small");
- clear_opt(sb, DIOREAD_NOLOCK);
- }
- }
-
err = ext4_setup_system_zone(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize system "
@@ -3710,22 +3784,19 @@
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
err);
- goto failed_mount4;
+ goto failed_mount5;
}
err = ext4_register_li_request(sb, first_not_zeroed);
if (err)
- goto failed_mount4;
+ goto failed_mount6;
sbi->s_kobj.kset = ext4_kset;
init_completion(&sbi->s_kobj_unregister);
err = kobject_init_and_add(&sbi->s_kobj, &ext4_ktype, NULL,
"%s", sb->s_id);
- if (err) {
- ext4_mb_release(sb);
- ext4_ext_release(sb);
- goto failed_mount4;
- };
+ if (err)
+ goto failed_mount7;
EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS;
ext4_orphan_cleanup(sb, es);
@@ -3759,13 +3830,19 @@
ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem");
goto failed_mount;
+failed_mount7:
+ ext4_unregister_li_request(sb);
+failed_mount6:
+ ext4_ext_release(sb);
+failed_mount5:
+ ext4_mb_release(sb);
+ ext4_release_system_zone(sb);
failed_mount4:
iput(root);
sb->s_root = NULL;
ext4_msg(sb, KERN_ERR, "mount failed");
destroy_workqueue(EXT4_SB(sb)->dio_unwritten_wq);
failed_mount_wq:
- ext4_release_system_zone(sb);
if (sbi->s_journal) {
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
@@ -3774,10 +3851,10 @@
del_timer(&sbi->s_err_report);
if (sbi->s_flex_groups)
ext4_kvfree(sbi->s_flex_groups);
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
+ percpu_counter_destroy(&sbi->s_freeclusters_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
- percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
+ percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
if (sbi->s_mmp_tsk)
kthread_stop(sbi->s_mmp_tsk);
failed_mount2:
@@ -4064,7 +4141,7 @@
struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
int error = 0;
- if (!sbh)
+ if (!sbh || block_device_ejected(sb))
return error;
if (buffer_write_io_error(sbh)) {
/*
@@ -4100,8 +4177,9 @@
else
es->s_kbytes_written =
cpu_to_le64(EXT4_SB(sb)->s_kbytes_written);
- ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
- &EXT4_SB(sb)->s_freeblocks_counter));
+ ext4_free_blocks_count_set(es,
+ EXT4_C2B(EXT4_SB(sb), percpu_counter_sum_positive(
+ &EXT4_SB(sb)->s_freeclusters_counter)));
es->s_free_inodes_count =
cpu_to_le32(percpu_counter_sum_positive(
&EXT4_SB(sb)->s_freeinodes_counter));
@@ -4506,16 +4584,34 @@
return err;
}
+/*
+ * Note: calculating the overhead so we can be compatible with
+ * historical BSD practice is quite difficult in the face of
+ * clusters/bigalloc. This is because multiple metadata blocks from
+ * different block group can end up in the same allocation cluster.
+ * Calculating the exact overhead in the face of clustered allocation
+ * requires either O(all block bitmaps) in memory or O(number of block
+ * groups**2) in time. We will still calculate the superblock for
+ * older file systems --- and if we come across with a bigalloc file
+ * system with zero in s_overhead_clusters the estimate will be close to
+ * correct especially for very large cluster sizes --- but for newer
+ * file systems, it's better to calculate this figure once at mkfs
+ * time, and store it in the superblock. If the superblock value is
+ * present (even for non-bigalloc file systems), we will use it.
+ */
static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
+ struct ext4_group_desc *gdp;
u64 fsid;
s64 bfree;
if (test_opt(sb, MINIX_DF)) {
sbi->s_overhead_last = 0;
+ } else if (es->s_overhead_clusters) {
+ sbi->s_overhead_last = le32_to_cpu(es->s_overhead_clusters);
} else if (sbi->s_blocks_last != ext4_blocks_count(es)) {
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
ext4_fsblk_t overhead = 0;
@@ -4530,24 +4626,16 @@
* All of the blocks before first_data_block are
* overhead
*/
- overhead = le32_to_cpu(es->s_first_data_block);
+ overhead = EXT4_B2C(sbi, le32_to_cpu(es->s_first_data_block));
/*
- * Add the overhead attributed to the superblock and
- * block group descriptors. If the sparse superblocks
- * feature is turned on, then not all groups have this.
+ * Add the overhead found in each block group
*/
for (i = 0; i < ngroups; i++) {
- overhead += ext4_bg_has_super(sb, i) +
- ext4_bg_num_gdb(sb, i);
+ gdp = ext4_get_group_desc(sb, i, NULL);
+ overhead += ext4_num_overhead_clusters(sb, i, gdp);
cond_resched();
}
-
- /*
- * Every block group has an inode bitmap, a block
- * bitmap, and an inode table.
- */
- overhead += ngroups * (2 + sbi->s_itb_per_group);
sbi->s_overhead_last = overhead;
smp_wmb();
sbi->s_blocks_last = ext4_blocks_count(es);
@@ -4555,11 +4643,12 @@
buf->f_type = EXT4_SUPER_MAGIC;
buf->f_bsize = sb->s_blocksize;
- buf->f_blocks = ext4_blocks_count(es) - sbi->s_overhead_last;
- bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter) -
- percpu_counter_sum_positive(&sbi->s_dirtyblocks_counter);
+ buf->f_blocks = (ext4_blocks_count(es) -
+ EXT4_C2B(sbi, sbi->s_overhead_last));
+ bfree = percpu_counter_sum_positive(&sbi->s_freeclusters_counter) -
+ percpu_counter_sum_positive(&sbi->s_dirtyclusters_counter);
/* prevent underflow in case that few free space is available */
- buf->f_bfree = max_t(s64, bfree, 0);
+ buf->f_bfree = EXT4_C2B(sbi, max_t(s64, bfree, 0));
buf->f_bavail = buf->f_bfree - ext4_r_blocks_count(es);
if (buf->f_bfree < ext4_r_blocks_count(es))
buf->f_bavail = 0;
@@ -4980,13 +5069,11 @@
return err;
err = ext4_init_system_zone();
if (err)
- goto out7;
+ goto out6;
ext4_kset = kset_create_and_add("ext4", NULL, fs_kobj);
if (!ext4_kset)
- goto out6;
- ext4_proc_root = proc_mkdir("fs/ext4", NULL);
- if (!ext4_proc_root)
goto out5;
+ ext4_proc_root = proc_mkdir("fs/ext4", NULL);
err = ext4_init_feat_adverts();
if (err)
@@ -5022,12 +5109,12 @@
out3:
ext4_exit_feat_adverts();
out4:
- remove_proc_entry("fs/ext4", NULL);
-out5:
+ if (ext4_proc_root)
+ remove_proc_entry("fs/ext4", NULL);
kset_unregister(ext4_kset);
-out6:
+out5:
ext4_exit_system_zone();
-out7:
+out6:
ext4_exit_pageio();
return err;
}
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index c757adc..93a00d8 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -820,8 +820,14 @@
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
goal = goal & EXT4_MAX_BLOCK_FILE_PHYS;
+ /*
+ * take i_data_sem because we will test
+ * i_delalloc_reserved_flag in ext4_mb_new_blocks
+ */
+ down_read((&EXT4_I(inode)->i_data_sem));
block = ext4_new_meta_blocks(handle, inode, goal, 0,
NULL, &error);
+ up_read((&EXT4_I(inode)->i_data_sem));
if (error)
goto cleanup;
@@ -985,11 +991,7 @@
no_expand = ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND);
ext4_set_inode_state(inode, EXT4_STATE_NO_EXPAND);
- error = ext4_get_inode_loc(inode, &is.iloc);
- if (error)
- goto cleanup;
-
- error = ext4_journal_get_write_access(handle, is.iloc.bh);
+ error = ext4_reserve_inode_write(handle, inode, &is.iloc);
if (error)
goto cleanup;
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 5efbd5d..aca191b 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -156,8 +156,8 @@
} else {
if (uni_xlate == 1) {
*op++ = ':';
- op = pack_hex_byte(op, ec >> 8);
- op = pack_hex_byte(op, ec);
+ op = hex_byte_pack(op, ec >> 8);
+ op = hex_byte_pack(op, ec);
len -= 5;
} else {
*op++ = '?';
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index a5d3853..1510a4d 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -326,15 +326,14 @@
extern int fat_flush_inodes(struct super_block *sb, struct inode *i1,
struct inode *i2);
/* fat/misc.c */
-extern void
-__fat_fs_error(struct super_block *sb, int report, const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4))) __cold;
+extern __printf(3, 4) __cold
+void __fat_fs_error(struct super_block *sb, int report, const char *fmt, ...);
#define fat_fs_error(sb, fmt, args...) \
__fat_fs_error(sb, 1, fmt , ## args)
#define fat_fs_error_ratelimit(sb, fmt, args...) \
__fat_fs_error(sb, __ratelimit(&MSDOS_SB(sb)->ratelimit), fmt , ## args)
-void fat_msg(struct super_block *sb, const char *level, const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4))) __cold;
+__printf(3, 4) __cold
+void fat_msg(struct super_block *sb, const char *level, const char *fmt, ...);
extern int fat_clusters_flush(struct super_block *sb);
extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts,
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 1726d73..808cac7 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -379,7 +379,7 @@
return error;
MSDOS_I(inode)->mmu_private = inode->i_size;
- inode->i_nlink = fat_subdirs(inode);
+ set_nlink(inode, fat_subdirs(inode));
} else { /* not a directory */
inode->i_generation |= 1;
inode->i_mode = fat_make_mode(sbi, de->attr,
@@ -1233,7 +1233,7 @@
fat_save_attrs(inode, ATTR_DIR);
inode->i_mtime.tv_sec = inode->i_atime.tv_sec = inode->i_ctime.tv_sec = 0;
inode->i_mtime.tv_nsec = inode->i_atime.tv_nsec = inode->i_ctime.tv_nsec = 0;
- inode->i_nlink = fat_subdirs(inode)+2;
+ set_nlink(inode, fat_subdirs(inode)+2);
return 0;
}
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 66e83b84..216b419 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -387,7 +387,7 @@
/* the directory was completed, just return a error */
goto out;
}
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index bb3f29c..a87a656 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -900,7 +900,7 @@
goto out;
}
inode->i_version++;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c
index 1a43114..7b2af5a 100644
--- a/fs/freevxfs/vxfs_inode.c
+++ b/fs/freevxfs/vxfs_inode.c
@@ -227,7 +227,7 @@
ip->i_uid = (uid_t)vip->vii_uid;
ip->i_gid = (gid_t)vip->vii_gid;
- ip->i_nlink = vip->vii_nlink;
+ set_nlink(ip, vip->vii_nlink);
ip->i_size = vip->vii_size;
ip->i_atime.tv_sec = vip->vii_atime;
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 85542a7..42593c5 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -231,7 +231,7 @@
if (iop)
inode->i_op = iop;
inode->i_fop = fop;
- inode->i_nlink = nlink;
+ set_nlink(inode, nlink);
inode->i_private = fc;
d_add(dentry, inode);
return dentry;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index add96f6..3e6d727 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -151,7 +151,7 @@
inode->i_ino = attr->ino;
inode->i_mode = (inode->i_mode & S_IFMT) | (attr->mode & 07777);
- inode->i_nlink = attr->nlink;
+ set_nlink(inode, attr->nlink);
inode->i_uid = attr->uid;
inode->i_gid = attr->gid;
inode->i_blocks = attr->blocks;
diff --git a/fs/gfs2/acl.c b/fs/gfs2/acl.c
index 34501b6..65978d7 100644
--- a/fs/gfs2/acl.c
+++ b/fs/gfs2/acl.c
@@ -82,7 +82,7 @@
iattr.ia_valid = ATTR_MODE;
iattr.ia_mode = mode;
- error = gfs2_setattr_simple(GFS2_I(inode), &iattr);
+ error = gfs2_setattr_simple(inode, &iattr);
}
return error;
@@ -160,6 +160,7 @@
int gfs2_acl_chmod(struct gfs2_inode *ip, struct iattr *attr)
{
+ struct inode *inode = &ip->i_inode;
struct posix_acl *acl;
char *data;
unsigned int len;
@@ -169,7 +170,7 @@
if (IS_ERR(acl))
return PTR_ERR(acl);
if (!acl)
- return gfs2_setattr_simple(ip, attr);
+ return gfs2_setattr_simple(inode, attr);
error = posix_acl_chmod(&acl, GFP_NOFS, attr->ia_mode);
if (error)
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index f9fbbe9..4858e1f 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -663,7 +663,7 @@
if (&ip->i_inode == sdp->sd_rindex)
rblocks += 2 * RES_STATFS;
if (alloc_required)
- rblocks += gfs2_rg_blocks(al);
+ rblocks += gfs2_rg_blocks(ip);
error = gfs2_trans_begin(sdp, rblocks,
PAGE_CACHE_SIZE/sdp->sd_sb.sb_bsize);
@@ -787,7 +787,6 @@
u64 to = pos + copied;
void *kaddr;
unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode);
- struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
BUG_ON((pos + len) > (dibh->b_size - sizeof(struct gfs2_dinode)));
kaddr = kmap_atomic(page, KM_USER0);
@@ -804,7 +803,6 @@
if (copied) {
if (inode->i_size < to)
i_size_write(inode, to);
- gfs2_dinode_out(ip, di);
mark_inode_dirty(inode);
}
@@ -873,10 +871,6 @@
gfs2_page_add_databufs(ip, page, from, to);
ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
- if (ret > 0) {
- gfs2_dinode_out(ip, dibh->b_data);
- mark_inode_dirty(inode);
- }
if (inode == sdp->sd_rindex) {
adjust_fs_space(inode);
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 7878c47..41d494d 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -10,6 +10,7 @@
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
+#include <linux/blkdev.h>
#include <linux/gfs2_ondisk.h>
#include <linux/crc32.h>
@@ -36,11 +37,6 @@
__u16 mp_list[GFS2_MAX_META_HEIGHT];
};
-typedef int (*block_call_t) (struct gfs2_inode *ip, struct buffer_head *dibh,
- struct buffer_head *bh, __be64 *top,
- __be64 *bottom, unsigned int height,
- void *data);
-
struct strip_mine {
int sm_first;
unsigned int sm_height;
@@ -273,6 +269,30 @@
return ((__be64 *)(bh->b_data + head_size)) + mp->mp_list[height];
}
+static void gfs2_metapath_ra(struct gfs2_glock *gl,
+ const struct buffer_head *bh, const __be64 *pos)
+{
+ struct buffer_head *rabh;
+ const __be64 *endp = (const __be64 *)(bh->b_data + bh->b_size);
+ const __be64 *t;
+
+ for (t = pos; t < endp; t++) {
+ if (!*t)
+ continue;
+
+ rabh = gfs2_getbuf(gl, be64_to_cpu(*t), CREATE);
+ if (trylock_buffer(rabh)) {
+ if (!buffer_uptodate(rabh)) {
+ rabh->b_end_io = end_buffer_read_sync;
+ submit_bh(READA | REQ_META, rabh);
+ continue;
+ }
+ unlock_buffer(rabh);
+ }
+ brelse(rabh);
+ }
+}
+
/**
* lookup_metapath - Walk the metadata tree to a specific point
* @ip: The inode
@@ -432,12 +452,14 @@
{
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct super_block *sb = sdp->sd_vfs;
struct buffer_head *dibh = mp->mp_bh[0];
u64 bn, dblock = 0;
unsigned n, i, blks, alloced = 0, iblks = 0, branch_start = 0;
unsigned dblks = 0;
unsigned ptrs_per_blk;
const unsigned end_of_metadata = height - 1;
+ int ret;
int eob = 0;
enum alloc_state state;
__be64 *ptr;
@@ -540,6 +562,15 @@
dblock = bn;
while (n-- > 0)
*ptr++ = cpu_to_be64(bn++);
+ if (buffer_zeronew(bh_map)) {
+ ret = sb_issue_zeroout(sb, dblock, dblks,
+ GFP_NOFS);
+ if (ret) {
+ fs_err(sdp,
+ "Failed to zero data buffers\n");
+ clear_buffer_zeronew(bh_map);
+ }
+ }
break;
}
} while ((state != ALLOC_DATA) || !dblock);
@@ -668,76 +699,6 @@
}
/**
- * recursive_scan - recursively scan through the end of a file
- * @ip: the inode
- * @dibh: the dinode buffer
- * @mp: the path through the metadata to the point to start
- * @height: the height the recursion is at
- * @block: the indirect block to look at
- * @first: 1 if this is the first block
- * @bc: the call to make for each piece of metadata
- * @data: data opaque to this function to pass to @bc
- *
- * When this is first called @height and @block should be zero and
- * @first should be 1.
- *
- * Returns: errno
- */
-
-static int recursive_scan(struct gfs2_inode *ip, struct buffer_head *dibh,
- struct metapath *mp, unsigned int height,
- u64 block, int first, block_call_t bc,
- void *data)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct buffer_head *bh = NULL;
- __be64 *top, *bottom;
- u64 bn;
- int error;
- int mh_size = sizeof(struct gfs2_meta_header);
-
- if (!height) {
- error = gfs2_meta_inode_buffer(ip, &bh);
- if (error)
- return error;
- dibh = bh;
-
- top = (__be64 *)(bh->b_data + sizeof(struct gfs2_dinode)) + mp->mp_list[0];
- bottom = (__be64 *)(bh->b_data + sizeof(struct gfs2_dinode)) + sdp->sd_diptrs;
- } else {
- error = gfs2_meta_indirect_buffer(ip, height, block, 0, &bh);
- if (error)
- return error;
-
- top = (__be64 *)(bh->b_data + mh_size) +
- (first ? mp->mp_list[height] : 0);
-
- bottom = (__be64 *)(bh->b_data + mh_size) + sdp->sd_inptrs;
- }
-
- error = bc(ip, dibh, bh, top, bottom, height, data);
- if (error)
- goto out;
-
- if (height < ip->i_height - 1)
- for (; top < bottom; top++, first = 0) {
- if (!*top)
- continue;
-
- bn = be64_to_cpu(*top);
-
- error = recursive_scan(ip, dibh, mp, height + 1, bn,
- first, bc, data);
- if (error)
- break;
- }
-
-out:
- brelse(bh);
- return error;
-}
-
-/**
* do_strip - Look for a layer a particular layer of the file and strip it off
* @ip: the inode
* @dibh: the dinode buffer
@@ -752,9 +713,8 @@
static int do_strip(struct gfs2_inode *ip, struct buffer_head *dibh,
struct buffer_head *bh, __be64 *top, __be64 *bottom,
- unsigned int height, void *data)
+ unsigned int height, struct strip_mine *sm)
{
- struct strip_mine *sm = data;
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrp_list rlist;
u64 bn, bstart;
@@ -783,11 +743,6 @@
else if (ip->i_depth)
revokes = sdp->sd_inptrs;
- if (ip != GFS2_I(sdp->sd_rindex))
- error = gfs2_rindex_hold(sdp, &ip->i_alloc->al_ri_gh);
- else if (!sdp->sd_rgrps)
- error = gfs2_ri_update(ip);
-
if (error)
return error;
@@ -805,7 +760,7 @@
blen++;
else {
if (bstart)
- gfs2_rlist_add(sdp, &rlist, bstart);
+ gfs2_rlist_add(ip, &rlist, bstart);
bstart = bn;
blen = 1;
@@ -813,7 +768,7 @@
}
if (bstart)
- gfs2_rlist_add(sdp, &rlist, bstart);
+ gfs2_rlist_add(ip, &rlist, bstart);
else
goto out; /* Nothing to do */
@@ -887,12 +842,82 @@
out_rlist:
gfs2_rlist_free(&rlist);
out:
- if (ip != GFS2_I(sdp->sd_rindex))
- gfs2_glock_dq_uninit(&ip->i_alloc->al_ri_gh);
return error;
}
/**
+ * recursive_scan - recursively scan through the end of a file
+ * @ip: the inode
+ * @dibh: the dinode buffer
+ * @mp: the path through the metadata to the point to start
+ * @height: the height the recursion is at
+ * @block: the indirect block to look at
+ * @first: 1 if this is the first block
+ * @sm: data opaque to this function to pass to @bc
+ *
+ * When this is first called @height and @block should be zero and
+ * @first should be 1.
+ *
+ * Returns: errno
+ */
+
+static int recursive_scan(struct gfs2_inode *ip, struct buffer_head *dibh,
+ struct metapath *mp, unsigned int height,
+ u64 block, int first, struct strip_mine *sm)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct buffer_head *bh = NULL;
+ __be64 *top, *bottom;
+ u64 bn;
+ int error;
+ int mh_size = sizeof(struct gfs2_meta_header);
+
+ if (!height) {
+ error = gfs2_meta_inode_buffer(ip, &bh);
+ if (error)
+ return error;
+ dibh = bh;
+
+ top = (__be64 *)(bh->b_data + sizeof(struct gfs2_dinode)) + mp->mp_list[0];
+ bottom = (__be64 *)(bh->b_data + sizeof(struct gfs2_dinode)) + sdp->sd_diptrs;
+ } else {
+ error = gfs2_meta_indirect_buffer(ip, height, block, 0, &bh);
+ if (error)
+ return error;
+
+ top = (__be64 *)(bh->b_data + mh_size) +
+ (first ? mp->mp_list[height] : 0);
+
+ bottom = (__be64 *)(bh->b_data + mh_size) + sdp->sd_inptrs;
+ }
+
+ error = do_strip(ip, dibh, bh, top, bottom, height, sm);
+ if (error)
+ goto out;
+
+ if (height < ip->i_height - 1) {
+
+ gfs2_metapath_ra(ip->i_gl, bh, top);
+
+ for (; top < bottom; top++, first = 0) {
+ if (!*top)
+ continue;
+
+ bn = be64_to_cpu(*top);
+
+ error = recursive_scan(ip, dibh, mp, height + 1, bn,
+ first, sm);
+ if (error)
+ break;
+ }
+ }
+out:
+ brelse(bh);
+ return error;
+}
+
+
+/**
* gfs2_block_truncate_page - Deal with zeroing out data for truncate
*
* This is partly borrowed from ext3.
@@ -1031,7 +1056,7 @@
sm.sm_first = !!size;
sm.sm_height = height;
- error = recursive_scan(ip, NULL, &mp, 0, 0, 1, do_strip, &sm);
+ error = recursive_scan(ip, NULL, &mp, 0, 0, 1, &sm);
if (error)
break;
}
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index 1cc2f8e..8ccad24 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -240,16 +240,15 @@
return error;
}
-static int gfs2_dir_read_stuffed(struct gfs2_inode *ip, char *buf,
- u64 offset, unsigned int size)
+static int gfs2_dir_read_stuffed(struct gfs2_inode *ip, __be64 *buf,
+ unsigned int size)
{
struct buffer_head *dibh;
int error;
error = gfs2_meta_inode_buffer(ip, &dibh);
if (!error) {
- offset += sizeof(struct gfs2_dinode);
- memcpy(buf, dibh->b_data + offset, size);
+ memcpy(buf, dibh->b_data + sizeof(struct gfs2_dinode), size);
brelse(dibh);
}
@@ -261,13 +260,12 @@
* gfs2_dir_read_data - Read a data from a directory inode
* @ip: The GFS2 Inode
* @buf: The buffer to place result into
- * @offset: File offset to begin jdata_readng from
* @size: Amount of data to transfer
*
* Returns: The amount of data actually copied or the error
*/
-static int gfs2_dir_read_data(struct gfs2_inode *ip, char *buf, u64 offset,
- unsigned int size, unsigned ra)
+static int gfs2_dir_read_data(struct gfs2_inode *ip, __be64 *buf,
+ unsigned int size)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
u64 lblock, dblock;
@@ -275,24 +273,14 @@
unsigned int o;
int copied = 0;
int error = 0;
- u64 disksize = i_size_read(&ip->i_inode);
-
- if (offset >= disksize)
- return 0;
-
- if (offset + size > disksize)
- size = disksize - offset;
-
- if (!size)
- return 0;
if (gfs2_is_stuffed(ip))
- return gfs2_dir_read_stuffed(ip, buf, offset, size);
+ return gfs2_dir_read_stuffed(ip, buf, size);
if (gfs2_assert_warn(sdp, gfs2_is_jdata(ip)))
return -EINVAL;
- lblock = offset;
+ lblock = 0;
o = do_div(lblock, sdp->sd_jbsize) + sizeof(struct gfs2_meta_header);
while (copied < size) {
@@ -311,8 +299,6 @@
if (error || !dblock)
goto fail;
BUG_ON(extlen < 1);
- if (!ra)
- extlen = 1;
bh = gfs2_meta_ra(ip->i_gl, dblock, extlen);
} else {
error = gfs2_meta_read(ip->i_gl, dblock, DIO_WAIT, &bh);
@@ -328,7 +314,7 @@
extlen--;
memcpy(buf, bh->b_data + o, amount);
brelse(bh);
- buf += amount;
+ buf += (amount/sizeof(__be64));
copied += amount;
lblock++;
o = sizeof(struct gfs2_meta_header);
@@ -371,7 +357,7 @@
if (hc == NULL)
return ERR_PTR(-ENOMEM);
- ret = gfs2_dir_read_data(ip, (char *)hc, 0, hsize, 1);
+ ret = gfs2_dir_read_data(ip, hc, hsize);
if (ret < 0) {
kfree(hc);
return ERR_PTR(ret);
@@ -1695,7 +1681,6 @@
const struct qstr *name = &dentry->d_name;
struct gfs2_dirent *dent, *prev = NULL;
struct buffer_head *bh;
- int error;
/* Returns _either_ the entry (if its first in block) or the
previous entry otherwise */
@@ -1724,22 +1709,15 @@
}
brelse(bh);
- error = gfs2_meta_inode_buffer(dip, &bh);
- if (error)
- return error;
-
if (!dip->i_entries)
gfs2_consist_inode(dip);
- gfs2_trans_add_bh(dip->i_gl, bh, 1);
dip->i_entries--;
dip->i_inode.i_mtime = dip->i_inode.i_ctime = CURRENT_TIME;
if (S_ISDIR(dentry->d_inode->i_mode))
drop_nlink(&dip->i_inode);
- gfs2_dinode_out(dip, bh->b_data);
- brelse(bh);
mark_inode_dirty(&dip->i_inode);
- return error;
+ return 0;
}
/**
@@ -1829,10 +1807,6 @@
if (error)
goto out_put;
- error = gfs2_rindex_hold(sdp, &dip->i_alloc->al_ri_gh);
- if (error)
- goto out_qs;
-
/* Count the number of leaves */
bh = leaf_bh;
@@ -1847,7 +1821,7 @@
if (blk != leaf_no)
brelse(bh);
- gfs2_rlist_add(sdp, &rlist, blk);
+ gfs2_rlist_add(dip, &rlist, blk);
l_blocks++;
}
@@ -1911,8 +1885,6 @@
gfs2_glock_dq_m(rlist.rl_rgrps, rlist.rl_ghs);
out_rlist:
gfs2_rlist_free(&rlist);
- gfs2_glock_dq_uninit(&dip->i_alloc->al_ri_gh);
-out_qs:
gfs2_quota_unhold(dip);
out_put:
gfs2_alloc_put(dip);
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index edeb9e8..ce36a56 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -59,15 +59,24 @@
struct gfs2_holder i_gh;
loff_t error;
- if (origin == 2) {
+ switch (origin) {
+ case SEEK_END: /* These reference inode->i_size */
+ case SEEK_DATA:
+ case SEEK_HOLE:
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY,
&i_gh);
if (!error) {
- error = generic_file_llseek_unlocked(file, offset, origin);
+ error = generic_file_llseek(file, offset, origin);
gfs2_glock_dq_uninit(&i_gh);
}
- } else
- error = generic_file_llseek_unlocked(file, offset, origin);
+ break;
+ case SEEK_CUR:
+ case SEEK_SET:
+ error = generic_file_llseek(file, offset, origin);
+ break;
+ default:
+ error = -EINVAL;
+ }
return error;
}
@@ -357,8 +366,15 @@
unsigned int data_blocks, ind_blocks, rblocks;
struct gfs2_holder gh;
struct gfs2_alloc *al;
+ loff_t size;
int ret;
+ /* Wait if fs is frozen. This is racy so we check again later on
+ * and retry if the fs has been frozen after the page lock has
+ * been acquired
+ */
+ vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
+
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret)
@@ -367,8 +383,15 @@
set_bit(GLF_DIRTY, &ip->i_gl->gl_flags);
set_bit(GIF_SW_PAGED, &ip->i_flags);
- if (!gfs2_write_alloc_required(ip, pos, PAGE_CACHE_SIZE))
+ if (!gfs2_write_alloc_required(ip, pos, PAGE_CACHE_SIZE)) {
+ lock_page(page);
+ if (!PageUptodate(page) || page->mapping != inode->i_mapping) {
+ ret = -EAGAIN;
+ unlock_page(page);
+ }
goto out_unlock;
+ }
+
ret = -ENOMEM;
al = gfs2_alloc_get(ip);
if (al == NULL)
@@ -388,7 +411,7 @@
rblocks += data_blocks ? data_blocks : 1;
if (ind_blocks || data_blocks) {
rblocks += RES_STATFS + RES_QUOTA;
- rblocks += gfs2_rg_blocks(al);
+ rblocks += gfs2_rg_blocks(ip);
}
ret = gfs2_trans_begin(sdp, rblocks, 0);
if (ret)
@@ -396,21 +419,29 @@
lock_page(page);
ret = -EINVAL;
- last_index = ip->i_inode.i_size >> PAGE_CACHE_SHIFT;
- if (page->index > last_index)
- goto out_unlock_page;
- ret = 0;
- if (!PageUptodate(page) || page->mapping != ip->i_inode.i_mapping)
- goto out_unlock_page;
- if (gfs2_is_stuffed(ip)) {
- ret = gfs2_unstuff_dinode(ip, page);
- if (ret)
- goto out_unlock_page;
- }
- ret = gfs2_allocate_page_backing(page);
+ size = i_size_read(inode);
+ last_index = (size - 1) >> PAGE_CACHE_SHIFT;
+ /* Check page index against inode size */
+ if (size == 0 || (page->index > last_index))
+ goto out_trans_end;
-out_unlock_page:
- unlock_page(page);
+ ret = -EAGAIN;
+ /* If truncated, we must retry the operation, we may have raced
+ * with the glock demotion code.
+ */
+ if (!PageUptodate(page) || page->mapping != inode->i_mapping)
+ goto out_trans_end;
+
+ /* Unstuff, if required, and allocate backing blocks for page */
+ ret = 0;
+ if (gfs2_is_stuffed(ip))
+ ret = gfs2_unstuff_dinode(ip, page);
+ if (ret == 0)
+ ret = gfs2_allocate_page_backing(page);
+
+out_trans_end:
+ if (ret)
+ unlock_page(page);
gfs2_trans_end(sdp);
out_trans_fail:
gfs2_inplace_release(ip);
@@ -422,11 +453,17 @@
gfs2_glock_dq(&gh);
out:
gfs2_holder_uninit(&gh);
- if (ret == -ENOMEM)
- ret = VM_FAULT_OOM;
- else if (ret)
- ret = VM_FAULT_SIGBUS;
- return ret;
+ if (ret == 0) {
+ set_page_dirty(page);
+ /* This check must be post dropping of transaction lock */
+ if (inode->i_sb->s_frozen == SB_UNFROZEN) {
+ wait_on_page_writeback(page);
+ } else {
+ ret = -EAGAIN;
+ unlock_page(page);
+ }
+ }
+ return block_page_mkwrite_return(ret);
}
static const struct vm_operations_struct gfs2_vm_ops = {
@@ -551,8 +588,16 @@
* @end: the end position in the file to sync
* @datasync: set if we can ignore timestamp changes
*
- * The VFS will flush data for us. We only need to worry
- * about metadata here.
+ * We split the data flushing here so that we don't wait for the data
+ * until after we've also sent the metadata to disk. Note that for
+ * data=ordered, we will write & wait for the data at the log flush
+ * stage anyway, so this is unlikely to make much of a difference
+ * except in the data=writeback case.
+ *
+ * If the fdatawrite fails due to any reason except -EIO, we will
+ * continue the remainder of the fsync, although we'll still report
+ * the error at the end. This is to match filemap_write_and_wait_range()
+ * behaviour.
*
* Returns: errno
*/
@@ -560,30 +605,34 @@
static int gfs2_fsync(struct file *file, loff_t start, loff_t end,
int datasync)
{
- struct inode *inode = file->f_mapping->host;
+ struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
int sync_state = inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC);
struct gfs2_inode *ip = GFS2_I(inode);
- int ret;
+ int ret, ret1 = 0;
- ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
- if (ret)
- return ret;
- mutex_lock(&inode->i_mutex);
+ if (mapping->nrpages) {
+ ret1 = filemap_fdatawrite_range(mapping, start, end);
+ if (ret1 == -EIO)
+ return ret1;
+ }
if (datasync)
sync_state &= ~I_DIRTY_SYNC;
if (sync_state) {
ret = sync_inode_metadata(inode, 1);
- if (ret) {
- mutex_unlock(&inode->i_mutex);
+ if (ret)
return ret;
- }
- gfs2_ail_flush(ip->i_gl);
+ if (gfs2_is_jdata(ip))
+ filemap_write_and_wait(mapping);
+ gfs2_ail_flush(ip->i_gl, 1);
}
- mutex_unlock(&inode->i_mutex);
- return 0;
+ if (mapping->nrpages)
+ ret = filemap_fdatawait_range(mapping, start, end);
+
+ return ret ? ret : ret1;
}
/**
@@ -620,135 +669,18 @@
return generic_file_aio_write(iocb, iov, nr_segs, pos);
}
-static int empty_write_end(struct page *page, unsigned from,
- unsigned to, int mode)
-{
- struct inode *inode = page->mapping->host;
- struct gfs2_inode *ip = GFS2_I(inode);
- struct buffer_head *bh;
- unsigned offset, blksize = 1 << inode->i_blkbits;
- pgoff_t end_index = i_size_read(inode) >> PAGE_CACHE_SHIFT;
-
- zero_user(page, from, to-from);
- mark_page_accessed(page);
-
- if (page->index < end_index || !(mode & FALLOC_FL_KEEP_SIZE)) {
- if (!gfs2_is_writeback(ip))
- gfs2_page_add_databufs(ip, page, from, to);
-
- block_commit_write(page, from, to);
- return 0;
- }
-
- offset = 0;
- bh = page_buffers(page);
- while (offset < to) {
- if (offset >= from) {
- set_buffer_uptodate(bh);
- mark_buffer_dirty(bh);
- clear_buffer_new(bh);
- write_dirty_buffer(bh, WRITE);
- }
- offset += blksize;
- bh = bh->b_this_page;
- }
-
- offset = 0;
- bh = page_buffers(page);
- while (offset < to) {
- if (offset >= from) {
- wait_on_buffer(bh);
- if (!buffer_uptodate(bh))
- return -EIO;
- }
- offset += blksize;
- bh = bh->b_this_page;
- }
- return 0;
-}
-
-static int needs_empty_write(sector_t block, struct inode *inode)
-{
- int error;
- struct buffer_head bh_map = { .b_state = 0, .b_blocknr = 0 };
-
- bh_map.b_size = 1 << inode->i_blkbits;
- error = gfs2_block_map(inode, block, &bh_map, 0);
- if (unlikely(error))
- return error;
- return !buffer_mapped(&bh_map);
-}
-
-static int write_empty_blocks(struct page *page, unsigned from, unsigned to,
- int mode)
-{
- struct inode *inode = page->mapping->host;
- unsigned start, end, next, blksize;
- sector_t block = page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
- int ret;
-
- blksize = 1 << inode->i_blkbits;
- next = end = 0;
- while (next < from) {
- next += blksize;
- block++;
- }
- start = next;
- do {
- next += blksize;
- ret = needs_empty_write(block, inode);
- if (unlikely(ret < 0))
- return ret;
- if (ret == 0) {
- if (end) {
- ret = __block_write_begin(page, start, end - start,
- gfs2_block_map);
- if (unlikely(ret))
- return ret;
- ret = empty_write_end(page, start, end, mode);
- if (unlikely(ret))
- return ret;
- end = 0;
- }
- start = next;
- }
- else
- end = next;
- block++;
- } while (next < to);
-
- if (end) {
- ret = __block_write_begin(page, start, end - start, gfs2_block_map);
- if (unlikely(ret))
- return ret;
- ret = empty_write_end(page, start, end, mode);
- if (unlikely(ret))
- return ret;
- }
-
- return 0;
-}
-
static int fallocate_chunk(struct inode *inode, loff_t offset, loff_t len,
int mode)
{
struct gfs2_inode *ip = GFS2_I(inode);
struct buffer_head *dibh;
int error;
- u64 start = offset >> PAGE_CACHE_SHIFT;
- unsigned int start_offset = offset & ~PAGE_CACHE_MASK;
- u64 end = (offset + len - 1) >> PAGE_CACHE_SHIFT;
- pgoff_t curr;
- struct page *page;
- unsigned int end_offset = (offset + len) & ~PAGE_CACHE_MASK;
- unsigned int from, to;
-
- if (!end_offset)
- end_offset = PAGE_CACHE_SIZE;
+ unsigned int nr_blks;
+ sector_t lblock = offset >> inode->i_blkbits;
error = gfs2_meta_inode_buffer(ip, &dibh);
if (unlikely(error))
- goto out;
+ return error;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
@@ -758,40 +690,31 @@
goto out;
}
- curr = start;
- offset = start << PAGE_CACHE_SHIFT;
- from = start_offset;
- to = PAGE_CACHE_SIZE;
- while (curr <= end) {
- page = grab_cache_page_write_begin(inode->i_mapping, curr,
- AOP_FLAG_NOFS);
- if (unlikely(!page)) {
- error = -ENOMEM;
- goto out;
- }
+ while (len) {
+ struct buffer_head bh_map = { .b_state = 0, .b_blocknr = 0 };
+ bh_map.b_size = len;
+ set_buffer_zeronew(&bh_map);
- if (curr == end)
- to = end_offset;
- error = write_empty_blocks(page, from, to, mode);
- if (!error && offset + to > inode->i_size &&
- !(mode & FALLOC_FL_KEEP_SIZE)) {
- i_size_write(inode, offset + to);
- }
- unlock_page(page);
- page_cache_release(page);
- if (error)
+ error = gfs2_block_map(inode, lblock, &bh_map, 1);
+ if (unlikely(error))
goto out;
- curr++;
- offset += PAGE_CACHE_SIZE;
- from = 0;
+ len -= bh_map.b_size;
+ nr_blks = bh_map.b_size >> inode->i_blkbits;
+ lblock += nr_blks;
+ if (!buffer_new(&bh_map))
+ continue;
+ if (unlikely(!buffer_zeronew(&bh_map))) {
+ error = -EIO;
+ goto out;
+ }
}
+ if (offset + len > inode->i_size && !(mode & FALLOC_FL_KEEP_SIZE))
+ i_size_write(inode, offset + len);
- gfs2_dinode_out(ip, dibh->b_data);
mark_inode_dirty(inode);
- brelse(dibh);
-
out:
+ brelse(dibh);
return error;
}
@@ -799,7 +722,7 @@
unsigned int *data_blocks, unsigned int *ind_blocks)
{
const struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- unsigned int max_blocks = ip->i_alloc->al_rgd->rd_free_clone;
+ unsigned int max_blocks = ip->i_rgd->rd_free_clone;
unsigned int tmp, max_data = max_blocks - 3 * (sdp->sd_max_height - 1);
for (tmp = max_data; tmp > sdp->sd_diptrs;) {
@@ -831,6 +754,7 @@
int error;
loff_t bsize_mask = ~((loff_t)sdp->sd_sb.sb_bsize - 1);
loff_t next = (offset + len - 1) >> sdp->sd_sb.sb_bsize_shift;
+ loff_t max_chunk_size = UINT_MAX & bsize_mask;
next = (next + 1) << sdp->sd_sb.sb_bsize_shift;
/* We only support the FALLOC_FL_KEEP_SIZE mode */
@@ -884,11 +808,12 @@
goto out_qunlock;
}
max_bytes = bytes;
- calc_max_reserv(ip, len, &max_bytes, &data_blocks, &ind_blocks);
+ calc_max_reserv(ip, (len > max_chunk_size)? max_chunk_size: len,
+ &max_bytes, &data_blocks, &ind_blocks);
al->al_requested = data_blocks + ind_blocks;
rblocks = RES_DINODE + ind_blocks + RES_STATFS + RES_QUOTA +
- RES_RG_HDR + gfs2_rg_blocks(al);
+ RES_RG_HDR + gfs2_rg_blocks(ip);
if (gfs2_is_jdata(ip))
rblocks += data_blocks ? data_blocks : 1;
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index 6670711..2553b85 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -201,7 +201,7 @@
void gfs2_glock_dq_m(unsigned int num_gh, struct gfs2_holder *ghs);
void gfs2_glock_dq_uninit_m(unsigned int num_gh, struct gfs2_holder *ghs);
-__attribute__ ((format(printf, 2, 3)))
+__printf(2, 3)
void gfs2_print_dbg(struct seq_file *seq, const char *fmt, ...);
/**
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index da21eca..1656df7a 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -28,40 +28,55 @@
#include "trans.h"
#include "dir.h"
+static void gfs2_ail_error(struct gfs2_glock *gl, const struct buffer_head *bh)
+{
+ fs_err(gl->gl_sbd, "AIL buffer %p: blocknr %llu state 0x%08lx mapping %p page state 0x%lx\n",
+ bh, (unsigned long long)bh->b_blocknr, bh->b_state,
+ bh->b_page->mapping, bh->b_page->flags);
+ fs_err(gl->gl_sbd, "AIL glock %u:%llu mapping %p\n",
+ gl->gl_name.ln_type, gl->gl_name.ln_number,
+ gfs2_glock2aspace(gl));
+ gfs2_lm_withdraw(gl->gl_sbd, "AIL error\n");
+}
+
/**
* __gfs2_ail_flush - remove all buffers for a given lock from the AIL
* @gl: the glock
+ * @fsync: set when called from fsync (not all buffers will be clean)
*
* None of the buffers should be dirty, locked, or pinned.
*/
-static void __gfs2_ail_flush(struct gfs2_glock *gl)
+static void __gfs2_ail_flush(struct gfs2_glock *gl, bool fsync)
{
struct gfs2_sbd *sdp = gl->gl_sbd;
struct list_head *head = &gl->gl_ail_list;
- struct gfs2_bufdata *bd;
+ struct gfs2_bufdata *bd, *tmp;
struct buffer_head *bh;
+ const unsigned long b_state = (1UL << BH_Dirty)|(1UL << BH_Pinned)|(1UL << BH_Lock);
+ sector_t blocknr;
+ gfs2_log_lock(sdp);
spin_lock(&sdp->sd_ail_lock);
- while (!list_empty(head)) {
- bd = list_entry(head->next, struct gfs2_bufdata,
- bd_ail_gl_list);
+ list_for_each_entry_safe(bd, tmp, head, bd_ail_gl_list) {
bh = bd->bd_bh;
- gfs2_remove_from_ail(bd);
- bd->bd_bh = NULL;
+ if (bh->b_state & b_state) {
+ if (fsync)
+ continue;
+ gfs2_ail_error(gl, bh);
+ }
+ blocknr = bh->b_blocknr;
bh->b_private = NULL;
- spin_unlock(&sdp->sd_ail_lock);
+ gfs2_remove_from_ail(bd); /* drops ref on bh */
- bd->bd_blkno = bh->b_blocknr;
- gfs2_log_lock(sdp);
- gfs2_assert_withdraw(sdp, !buffer_busy(bh));
+ bd->bd_bh = NULL;
+ bd->bd_blkno = blocknr;
+
gfs2_trans_add_revoke(sdp, bd);
- gfs2_log_unlock(sdp);
-
- spin_lock(&sdp->sd_ail_lock);
}
- gfs2_assert_withdraw(sdp, !atomic_read(&gl->gl_ail_count));
+ BUG_ON(!fsync && atomic_read(&gl->gl_ail_count));
spin_unlock(&sdp->sd_ail_lock);
+ gfs2_log_unlock(sdp);
}
@@ -84,13 +99,13 @@
BUG_ON(current->journal_info);
current->journal_info = &tr;
- __gfs2_ail_flush(gl);
+ __gfs2_ail_flush(gl, 0);
gfs2_trans_end(sdp);
gfs2_log_flush(sdp, NULL);
}
-void gfs2_ail_flush(struct gfs2_glock *gl)
+void gfs2_ail_flush(struct gfs2_glock *gl, bool fsync)
{
struct gfs2_sbd *sdp = gl->gl_sbd;
unsigned int revokes = atomic_read(&gl->gl_ail_count);
@@ -102,7 +117,7 @@
ret = gfs2_trans_begin(sdp, 0, revokes);
if (ret)
return;
- __gfs2_ail_flush(gl);
+ __gfs2_ail_flush(gl, fsync);
gfs2_trans_end(sdp);
gfs2_log_flush(sdp, NULL);
}
@@ -119,6 +134,7 @@
static void rgrp_go_sync(struct gfs2_glock *gl)
{
struct address_space *metamapping = gfs2_glock2aspace(gl);
+ struct gfs2_rgrpd *rgd;
int error;
if (!test_and_clear_bit(GLF_DIRTY, &gl->gl_flags))
@@ -130,6 +146,12 @@
error = filemap_fdatawait(metamapping);
mapping_set_error(metamapping, error);
gfs2_ail_empty_gl(gl);
+
+ spin_lock(&gl->gl_spin);
+ rgd = gl->gl_object;
+ if (rgd)
+ gfs2_free_clones(rgd);
+ spin_unlock(&gl->gl_spin);
}
/**
@@ -277,7 +299,7 @@
if (nlink == 0)
clear_nlink(inode);
else
- inode->i_nlink = nlink;
+ set_nlink(inode, nlink);
}
}
@@ -430,33 +452,6 @@
}
/**
- * rgrp_go_lock - operation done after an rgrp lock is locked by
- * a first holder on this node.
- * @gl: the glock
- * @flags:
- *
- * Returns: errno
- */
-
-static int rgrp_go_lock(struct gfs2_holder *gh)
-{
- return gfs2_rgrp_bh_get(gh->gh_gl->gl_object);
-}
-
-/**
- * rgrp_go_unlock - operation done before an rgrp lock is unlocked by
- * a last holder on this node.
- * @gl: the glock
- * @flags:
- *
- */
-
-static void rgrp_go_unlock(struct gfs2_holder *gh)
-{
- gfs2_rgrp_bh_put(gh->gh_gl->gl_object);
-}
-
-/**
* trans_go_sync - promote/demote the transaction glock
* @gl: the glock
* @state: the requested state
@@ -558,8 +553,8 @@
const struct gfs2_glock_operations gfs2_rgrp_glops = {
.go_xmote_th = rgrp_go_sync,
.go_inval = rgrp_go_inval,
- .go_lock = rgrp_go_lock,
- .go_unlock = rgrp_go_unlock,
+ .go_lock = gfs2_rgrp_go_lock,
+ .go_unlock = gfs2_rgrp_go_unlock,
.go_dump = gfs2_rgrp_dump,
.go_type = LM_TYPE_RGRP,
.go_flags = GLOF_ASPACE,
diff --git a/fs/gfs2/glops.h b/fs/gfs2/glops.h
index 6fce409..bf95a2d 100644
--- a/fs/gfs2/glops.h
+++ b/fs/gfs2/glops.h
@@ -23,6 +23,6 @@
extern const struct gfs2_glock_operations gfs2_journal_glops;
extern const struct gfs2_glock_operations *gfs2_glops_list[];
-extern void gfs2_ail_flush(struct gfs2_glock *gl);
+extern void gfs2_ail_flush(struct gfs2_glock *gl, bool fsync);
#endif /* __GLOPS_DOT_H__ */
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 892ac37..7389dfd 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -18,6 +18,7 @@
#include <linux/rcupdate.h>
#include <linux/rculist_bl.h>
#include <linux/completion.h>
+#include <linux/rbtree.h>
#define DIO_WAIT 0x00000010
#define DIO_METADATA 0x00000020
@@ -78,8 +79,7 @@
};
struct gfs2_rgrpd {
- struct list_head rd_list; /* Link with superblock */
- struct list_head rd_list_mru;
+ struct rb_node rd_node; /* Link with superblock */
struct gfs2_glock *rd_gl; /* Glock for this rgrp */
u64 rd_addr; /* grp block disk address */
u64 rd_data0; /* first data location */
@@ -91,10 +91,7 @@
u32 rd_dinodes;
u64 rd_igeneration;
struct gfs2_bitmap *rd_bits;
- struct mutex rd_mutex;
- struct gfs2_log_element rd_le;
struct gfs2_sbd *rd_sbd;
- unsigned int rd_bh_count;
u32 rd_last_alloc;
u32 rd_flags;
#define GFS2_RDF_CHECK 0x10000000 /* check for unlinked inodes */
@@ -106,12 +103,15 @@
enum gfs2_state_bits {
BH_Pinned = BH_PrivateStart,
BH_Escaped = BH_PrivateStart + 1,
+ BH_Zeronew = BH_PrivateStart + 2,
};
BUFFER_FNS(Pinned, pinned)
TAS_BUFFER_FNS(Pinned, pinned)
BUFFER_FNS(Escaped, escaped)
TAS_BUFFER_FNS(Escaped, escaped)
+BUFFER_FNS(Zeronew, zeronew)
+TAS_BUFFER_FNS(Zeronew, zeronew)
struct gfs2_bufdata {
struct buffer_head *bd_bh;
@@ -246,7 +246,6 @@
struct gfs2_alloc {
/* Quota stuff */
-
struct gfs2_quota_data *al_qd[2*MAXQUOTAS];
struct gfs2_holder al_qd_ghs[2*MAXQUOTAS];
unsigned int al_qd_num;
@@ -255,18 +254,13 @@
u32 al_alloced; /* Filled in by gfs2_alloc_*() */
/* Filled in by gfs2_inplace_reserve() */
-
- unsigned int al_line;
- char *al_file;
- struct gfs2_holder al_ri_gh;
struct gfs2_holder al_rgd_gh;
- struct gfs2_rgrpd *al_rgd;
-
};
enum {
GIF_INVALID = 0,
GIF_QD_LOCKED = 1,
+ GIF_ALLOC_FAILED = 2,
GIF_SW_PAGED = 3,
};
@@ -282,6 +276,7 @@
struct gfs2_holder i_iopen_gh;
struct gfs2_holder i_gh; /* for prepare/commit_write only */
struct gfs2_alloc *i_alloc;
+ struct gfs2_rgrpd *i_rgd;
u64 i_goal; /* goal block for allocations */
struct rw_semaphore i_rw_mutex;
struct list_head i_trunc_list;
@@ -574,9 +569,7 @@
int sd_rindex_uptodate;
spinlock_t sd_rindex_spin;
struct mutex sd_rindex_mutex;
- struct list_head sd_rindex_list;
- struct list_head sd_rindex_mru_list;
- struct gfs2_rgrpd *sd_rindex_forward;
+ struct rb_root sd_rindex_tree;
unsigned int sd_rgrps;
unsigned int sd_max_rg_data;
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 6525b80..cfd4959 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -583,7 +583,7 @@
goto fail_quota_locks;
error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
- al->al_rgd->rd_length +
+ dip->i_rgd->rd_length +
2 * RES_DINODE +
RES_STATFS + RES_QUOTA, 0);
if (error)
@@ -613,8 +613,7 @@
gfs2_trans_end(sdp);
fail_ipreserv:
- if (dip->i_alloc->al_rgd)
- gfs2_inplace_release(dip);
+ gfs2_inplace_release(dip);
fail_quota_locks:
gfs2_quota_unlock(dip);
@@ -661,7 +660,7 @@
static int gfs2_create_inode(struct inode *dir, struct dentry *dentry,
unsigned int mode, dev_t dev, const char *symname,
- unsigned int size)
+ unsigned int size, int excl)
{
const struct qstr *name = &dentry->d_name;
struct gfs2_holder ghs[2];
@@ -681,6 +680,12 @@
goto fail;
error = create_ok(dip, name, mode);
+ if ((error == -EEXIST) && S_ISREG(mode) && !excl) {
+ inode = gfs2_lookupi(dir, &dentry->d_name, 0);
+ gfs2_glock_dq_uninit(ghs);
+ d_instantiate(dentry, inode);
+ return IS_ERR(inode) ? PTR_ERR(inode) : 0;
+ }
if (error)
goto fail_gunlock;
@@ -723,21 +728,22 @@
brelse(bh);
gfs2_trans_end(sdp);
- if (dip->i_alloc->al_rgd)
- gfs2_inplace_release(dip);
+ gfs2_inplace_release(dip);
gfs2_quota_unlock(dip);
gfs2_alloc_put(dip);
- gfs2_glock_dq_uninit_m(2, ghs);
mark_inode_dirty(inode);
+ gfs2_glock_dq_uninit_m(2, ghs);
d_instantiate(dentry, inode);
return 0;
fail_gunlock2:
gfs2_glock_dq_uninit(ghs + 1);
- if (inode && !IS_ERR(inode))
- iput(inode);
fail_gunlock:
gfs2_glock_dq_uninit(ghs);
+ if (inode && !IS_ERR(inode)) {
+ set_bit(GIF_ALLOC_FAILED, &GFS2_I(inode)->i_flags);
+ iput(inode);
+ }
fail:
if (bh)
brelse(bh);
@@ -756,24 +762,10 @@
static int gfs2_create(struct inode *dir, struct dentry *dentry,
int mode, struct nameidata *nd)
{
- struct inode *inode;
- int ret;
-
- for (;;) {
- ret = gfs2_create_inode(dir, dentry, S_IFREG | mode, 0, NULL, 0);
- if (ret != -EEXIST || (nd && (nd->flags & LOOKUP_EXCL)))
- return ret;
-
- inode = gfs2_lookupi(dir, &dentry->d_name, 0);
- if (inode) {
- if (!IS_ERR(inode))
- break;
- return PTR_ERR(inode);
- }
- }
-
- d_instantiate(dentry, inode);
- return 0;
+ int excl = 0;
+ if (nd && (nd->flags & LOOKUP_EXCL))
+ excl = 1;
+ return gfs2_create_inode(dir, dentry, S_IFREG | mode, 0, NULL, 0, excl);
}
/**
@@ -900,7 +892,7 @@
goto out_gunlock_q;
error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
- gfs2_rg_blocks(al) +
+ gfs2_rg_blocks(dip) +
2 * RES_DINODE + RES_STATFS +
RES_QUOTA, 0);
if (error)
@@ -922,8 +914,9 @@
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
inc_nlink(&ip->i_inode);
ip->i_inode.i_ctime = CURRENT_TIME;
- gfs2_dinode_out(ip, dibh->b_data);
- mark_inode_dirty(&ip->i_inode);
+ ihold(inode);
+ d_instantiate(dentry, inode);
+ mark_inode_dirty(inode);
out_brelse:
brelse(dibh);
@@ -945,11 +938,6 @@
out_parent:
gfs2_holder_uninit(ghs);
gfs2_holder_uninit(ghs + 1);
- if (!error) {
- ihold(inode);
- d_instantiate(dentry, inode);
- mark_inode_dirty(inode);
- }
return error;
}
@@ -1022,8 +1010,6 @@
clear_nlink(inode);
else
drop_nlink(inode);
- gfs2_trans_add_bh(ip->i_gl, bh, 1);
- gfs2_dinode_out(ip, bh->b_data);
mark_inode_dirty(inode);
if (inode->i_nlink == 0)
gfs2_unlink_di(inode);
@@ -1051,13 +1037,8 @@
struct buffer_head *bh;
struct gfs2_holder ghs[3];
struct gfs2_rgrpd *rgd;
- struct gfs2_holder ri_gh;
int error;
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- return error;
-
gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
@@ -1114,7 +1095,6 @@
gfs2_glock_dq(ghs);
out_parent:
gfs2_holder_uninit(ghs);
- gfs2_glock_dq_uninit(&ri_gh);
return error;
}
@@ -1137,7 +1117,7 @@
if (size > sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode) - 1)
return -ENAMETOOLONG;
- return gfs2_create_inode(dir, dentry, S_IFLNK | S_IRWXUGO, 0, symname, size);
+ return gfs2_create_inode(dir, dentry, S_IFLNK | S_IRWXUGO, 0, symname, size, 0);
}
/**
@@ -1151,7 +1131,7 @@
static int gfs2_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
- return gfs2_create_inode(dir, dentry, S_IFDIR | mode, 0, NULL, 0);
+ return gfs2_create_inode(dir, dentry, S_IFDIR | mode, 0, NULL, 0, 0);
}
/**
@@ -1166,7 +1146,7 @@
static int gfs2_mknod(struct inode *dir, struct dentry *dentry, int mode,
dev_t dev)
{
- return gfs2_create_inode(dir, dentry, mode, dev, NULL, 0);
+ return gfs2_create_inode(dir, dentry, mode, dev, NULL, 0, 0);
}
/*
@@ -1232,7 +1212,7 @@
struct gfs2_inode *ip = GFS2_I(odentry->d_inode);
struct gfs2_inode *nip = NULL;
struct gfs2_sbd *sdp = GFS2_SB(odir);
- struct gfs2_holder ghs[5], r_gh = { .gh_gl = NULL, }, ri_gh;
+ struct gfs2_holder ghs[5], r_gh = { .gh_gl = NULL, };
struct gfs2_rgrpd *nrgd;
unsigned int num_gh;
int dir_rename = 0;
@@ -1246,10 +1226,6 @@
return 0;
}
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- return error;
-
if (odip != ndip) {
error = gfs2_glock_nq_init(sdp->sd_rename_gl, LM_ST_EXCLUSIVE,
0, &r_gh);
@@ -1386,12 +1362,12 @@
al->al_requested = sdp->sd_max_dirres;
- error = gfs2_inplace_reserve_ri(ndip);
+ error = gfs2_inplace_reserve(ndip);
if (error)
goto out_gunlock_q;
error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
- gfs2_rg_blocks(al) +
+ gfs2_rg_blocks(ndip) +
4 * RES_DINODE + 4 * RES_LEAF +
RES_STATFS + RES_QUOTA + 4, 0);
if (error)
@@ -1457,7 +1433,6 @@
if (r_gh.gh_gl)
gfs2_glock_dq_uninit(&r_gh);
out:
- gfs2_glock_dq_uninit(&ri_gh);
return error;
}
@@ -1561,21 +1536,10 @@
return error;
}
-static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
+static int __gfs2_setattr_simple(struct inode *inode, struct iattr *attr)
{
- struct inode *inode = &ip->i_inode;
- struct buffer_head *dibh;
- int error;
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (error)
- return error;
-
setattr_copy(inode, attr);
mark_inode_dirty(inode);
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
return 0;
}
@@ -1587,19 +1551,19 @@
* Returns: errno
*/
-int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
+int gfs2_setattr_simple(struct inode *inode, struct iattr *attr)
{
int error;
if (current->journal_info)
- return __gfs2_setattr_simple(ip, attr);
+ return __gfs2_setattr_simple(inode, attr);
- error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE, 0);
+ error = gfs2_trans_begin(GFS2_SB(inode), RES_DINODE, 0);
if (error)
return error;
- error = __gfs2_setattr_simple(ip, attr);
- gfs2_trans_end(GFS2_SB(&ip->i_inode));
+ error = __gfs2_setattr_simple(inode, attr);
+ gfs2_trans_end(GFS2_SB(inode));
return error;
}
@@ -1637,7 +1601,7 @@
if (error)
goto out_gunlock_q;
- error = gfs2_setattr_simple(ip, attr);
+ error = gfs2_setattr_simple(inode, attr);
if (error)
goto out_end_trans;
@@ -1693,12 +1657,12 @@
else if ((attr->ia_valid & ATTR_MODE) && IS_POSIXACL(inode))
error = gfs2_acl_chmod(ip, attr);
else
- error = gfs2_setattr_simple(ip, attr);
+ error = gfs2_setattr_simple(inode, attr);
out:
- gfs2_glock_dq_uninit(&i_gh);
if (!error)
mark_inode_dirty(inode);
+ gfs2_glock_dq_uninit(&i_gh);
return error;
}
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index 8d90e0c..276e7b5 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -109,7 +109,7 @@
extern struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
int is_root);
extern int gfs2_permission(struct inode *inode, int mask);
-extern int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr);
+extern int gfs2_setattr_simple(struct inode *inode, struct iattr *attr);
extern struct inode *gfs2_lookup_simple(struct inode *dip, const char *name);
extern void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf);
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 05bbb12..0301be6 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -60,6 +60,29 @@
trace_gfs2_pin(bd, 1);
}
+static bool buffer_is_rgrp(const struct gfs2_bufdata *bd)
+{
+ return bd->bd_gl->gl_name.ln_type == LM_TYPE_RGRP;
+}
+
+static void maybe_release_space(struct gfs2_bufdata *bd)
+{
+ struct gfs2_glock *gl = bd->bd_gl;
+ struct gfs2_sbd *sdp = gl->gl_sbd;
+ struct gfs2_rgrpd *rgd = gl->gl_object;
+ unsigned int index = bd->bd_bh->b_blocknr - gl->gl_name.ln_number;
+ struct gfs2_bitmap *bi = rgd->rd_bits + index;
+
+ if (bi->bi_clone == 0)
+ return;
+ if (sdp->sd_args.ar_discard)
+ gfs2_rgrp_send_discards(sdp, rgd->rd_data0, bd->bd_bh, bi);
+ memcpy(bi->bi_clone + bi->bi_offset,
+ bd->bd_bh->b_data + bi->bi_offset, bi->bi_len);
+ clear_bit(GBF_FULL, &bi->bi_flags);
+ rgd->rd_free_clone = rgd->rd_free;
+}
+
/**
* gfs2_unpin - Unpin a buffer
* @sdp: the filesystem the buffer belongs to
@@ -81,6 +104,9 @@
mark_buffer_dirty(bh);
clear_buffer_pinned(bh);
+ if (buffer_is_rgrp(bd))
+ maybe_release_space(bd);
+
spin_lock(&sdp->sd_ail_lock);
if (bd->bd_ail) {
list_del(&bd->bd_ail_st_list);
@@ -469,42 +495,6 @@
gfs2_revoke_clean(sdp);
}
-static void rg_lo_add(struct gfs2_sbd *sdp, struct gfs2_log_element *le)
-{
- struct gfs2_rgrpd *rgd;
- struct gfs2_trans *tr = current->journal_info;
-
- tr->tr_touched = 1;
-
- rgd = container_of(le, struct gfs2_rgrpd, rd_le);
-
- gfs2_log_lock(sdp);
- if (!list_empty(&le->le_list)){
- gfs2_log_unlock(sdp);
- return;
- }
- gfs2_rgrp_bh_hold(rgd);
- sdp->sd_log_num_rg++;
- list_add(&le->le_list, &sdp->sd_log_le_rg);
- gfs2_log_unlock(sdp);
-}
-
-static void rg_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_ail *ai)
-{
- struct list_head *head = &sdp->sd_log_le_rg;
- struct gfs2_rgrpd *rgd;
-
- while (!list_empty(head)) {
- rgd = list_entry(head->next, struct gfs2_rgrpd, rd_le.le_list);
- list_del_init(&rgd->rd_le.le_list);
- sdp->sd_log_num_rg--;
-
- gfs2_rgrp_repolish_clones(rgd);
- gfs2_rgrp_bh_put(rgd);
- }
- gfs2_assert_warn(sdp, !sdp->sd_log_num_rg);
-}
-
/**
* databuf_lo_add - Add a databuf to the transaction.
*
@@ -705,8 +695,6 @@
brelse(bh_log);
brelse(bh_ip);
- if (error)
- break;
sdp->sd_replayed_blocks++;
}
@@ -771,8 +759,6 @@
};
const struct gfs2_log_operations gfs2_rg_lops = {
- .lo_add = rg_lo_add,
- .lo_after_commit = rg_lo_after_commit,
.lo_name = "rg",
};
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 079587e..7e823bb 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -77,8 +77,7 @@
spin_lock_init(&sdp->sd_rindex_spin);
mutex_init(&sdp->sd_rindex_mutex);
- INIT_LIST_HEAD(&sdp->sd_rindex_list);
- INIT_LIST_HEAD(&sdp->sd_rindex_mru_list);
+ sdp->sd_rindex_tree.rb_node = NULL;
INIT_LIST_HEAD(&sdp->sd_jindex_list);
spin_lock_init(&sdp->sd_jindex_spin);
@@ -652,7 +651,6 @@
fs_err(sdp, "can't lookup journal index: %d\n", error);
return PTR_ERR(sdp->sd_jindex);
}
- ip = GFS2_I(sdp->sd_jindex);
/* Load in the journal index special file */
@@ -764,7 +762,6 @@
static int init_inodes(struct gfs2_sbd *sdp, int undo)
{
int error = 0;
- struct gfs2_inode *ip;
struct inode *master = sdp->sd_master_dir->d_inode;
if (undo)
@@ -789,7 +786,6 @@
fs_err(sdp, "can't get resource index inode: %d\n", error);
goto fail_statfs;
}
- ip = GFS2_I(sdp->sd_rindex);
sdp->sd_rindex_uptodate = 0;
/* Read in the quota inode */
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 0e8bb13..7e528dc 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -638,15 +638,18 @@
unsigned long index = loc >> PAGE_CACHE_SHIFT;
unsigned offset = loc & (PAGE_CACHE_SIZE - 1);
unsigned blocksize, iblock, pos;
- struct buffer_head *bh, *dibh;
+ struct buffer_head *bh;
struct page *page;
void *kaddr, *ptr;
struct gfs2_quota q, *qp;
int err, nbytes;
u64 size;
- if (gfs2_is_stuffed(ip))
- gfs2_unstuff_dinode(ip, NULL);
+ if (gfs2_is_stuffed(ip)) {
+ err = gfs2_unstuff_dinode(ip, NULL);
+ if (err)
+ return err;
+ }
memset(&q, 0, sizeof(struct gfs2_quota));
err = gfs2_internal_read(ip, NULL, (char *)&q, &loc, sizeof(q));
@@ -736,22 +739,13 @@
goto get_a_page;
}
- /* Update the disk inode timestamp and size (if extended) */
- err = gfs2_meta_inode_buffer(ip, &dibh);
- if (err)
- goto out;
-
size = loc + sizeof(struct gfs2_quota);
if (size > inode->i_size)
i_size_write(inode, size);
inode->i_mtime = inode->i_atime = CURRENT_TIME;
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
mark_inode_dirty(inode);
-
-out:
return err;
+
unlock_out:
unlock_page(page);
page_cache_release(page);
@@ -822,7 +816,7 @@
goto out_alloc;
if (nalloc)
- blocks += gfs2_rg_blocks(al) + nalloc * ind_blocks + RES_STATFS;
+ blocks += gfs2_rg_blocks(ip) + nalloc * ind_blocks + RES_STATFS;
error = gfs2_trans_begin(sdp, blocks, 0);
if (error)
@@ -936,7 +930,9 @@
unsigned int x;
int error = 0;
- gfs2_quota_hold(ip, uid, gid);
+ error = gfs2_quota_hold(ip, uid, gid);
+ if (error)
+ return error;
if (capable(CAP_SYS_RESOURCE) ||
sdp->sd_args.ar_quota != GFS2_QUOTA_ON)
@@ -1607,7 +1603,7 @@
error = gfs2_inplace_reserve(ip);
if (error)
goto out_alloc;
- blocks += gfs2_rg_blocks(al);
+ blocks += gfs2_rg_blocks(ip);
}
/* Some quotas span block boundaries and can update two blocks,
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 7f8af1e..96bd6d75 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -15,6 +15,7 @@
#include <linux/gfs2_ondisk.h>
#include <linux/prefetch.h>
#include <linux/blkdev.h>
+#include <linux/rbtree.h>
#include "gfs2.h"
#include "incore.h"
@@ -328,18 +329,22 @@
struct gfs2_rgrpd *gfs2_blk2rgrpd(struct gfs2_sbd *sdp, u64 blk)
{
- struct gfs2_rgrpd *rgd;
+ struct rb_node **newn;
+ struct gfs2_rgrpd *cur;
spin_lock(&sdp->sd_rindex_spin);
-
- list_for_each_entry(rgd, &sdp->sd_rindex_mru_list, rd_list_mru) {
- if (rgrp_contains_block(rgd, blk)) {
- list_move(&rgd->rd_list_mru, &sdp->sd_rindex_mru_list);
+ newn = &sdp->sd_rindex_tree.rb_node;
+ while (*newn) {
+ cur = rb_entry(*newn, struct gfs2_rgrpd, rd_node);
+ if (blk < cur->rd_addr)
+ newn = &((*newn)->rb_left);
+ else if (blk >= cur->rd_data0 + cur->rd_data)
+ newn = &((*newn)->rb_right);
+ else {
spin_unlock(&sdp->sd_rindex_spin);
- return rgd;
+ return cur;
}
}
-
spin_unlock(&sdp->sd_rindex_spin);
return NULL;
@@ -354,8 +359,15 @@
struct gfs2_rgrpd *gfs2_rgrpd_get_first(struct gfs2_sbd *sdp)
{
- gfs2_assert(sdp, !list_empty(&sdp->sd_rindex_list));
- return list_entry(sdp->sd_rindex_list.next, struct gfs2_rgrpd, rd_list);
+ const struct rb_node *n;
+ struct gfs2_rgrpd *rgd;
+
+ spin_lock(&sdp->sd_rindex_spin);
+ n = rb_first(&sdp->sd_rindex_tree);
+ rgd = rb_entry(n, struct gfs2_rgrpd, rd_node);
+ spin_unlock(&sdp->sd_rindex_spin);
+
+ return rgd;
}
/**
@@ -367,45 +379,58 @@
struct gfs2_rgrpd *gfs2_rgrpd_get_next(struct gfs2_rgrpd *rgd)
{
- if (rgd->rd_list.next == &rgd->rd_sbd->sd_rindex_list)
- return NULL;
- return list_entry(rgd->rd_list.next, struct gfs2_rgrpd, rd_list);
-}
-
-static void clear_rgrpdi(struct gfs2_sbd *sdp)
-{
- struct list_head *head;
- struct gfs2_rgrpd *rgd;
- struct gfs2_glock *gl;
+ struct gfs2_sbd *sdp = rgd->rd_sbd;
+ const struct rb_node *n;
spin_lock(&sdp->sd_rindex_spin);
- sdp->sd_rindex_forward = NULL;
+ n = rb_next(&rgd->rd_node);
+ if (n == NULL)
+ n = rb_first(&sdp->sd_rindex_tree);
+
+ if (unlikely(&rgd->rd_node == n)) {
+ spin_unlock(&sdp->sd_rindex_spin);
+ return NULL;
+ }
+ rgd = rb_entry(n, struct gfs2_rgrpd, rd_node);
spin_unlock(&sdp->sd_rindex_spin);
+ return rgd;
+}
- head = &sdp->sd_rindex_list;
- while (!list_empty(head)) {
- rgd = list_entry(head->next, struct gfs2_rgrpd, rd_list);
- gl = rgd->rd_gl;
+void gfs2_free_clones(struct gfs2_rgrpd *rgd)
+{
+ int x;
- list_del(&rgd->rd_list);
- list_del(&rgd->rd_list_mru);
-
- if (gl) {
- gl->gl_object = NULL;
- gfs2_glock_add_to_lru(gl);
- gfs2_glock_put(gl);
- }
-
- kfree(rgd->rd_bits);
- kmem_cache_free(gfs2_rgrpd_cachep, rgd);
+ for (x = 0; x < rgd->rd_length; x++) {
+ struct gfs2_bitmap *bi = rgd->rd_bits + x;
+ kfree(bi->bi_clone);
+ bi->bi_clone = NULL;
}
}
void gfs2_clear_rgrpd(struct gfs2_sbd *sdp)
{
- mutex_lock(&sdp->sd_rindex_mutex);
- clear_rgrpdi(sdp);
- mutex_unlock(&sdp->sd_rindex_mutex);
+ struct rb_node *n;
+ struct gfs2_rgrpd *rgd;
+ struct gfs2_glock *gl;
+
+ while ((n = rb_first(&sdp->sd_rindex_tree))) {
+ rgd = rb_entry(n, struct gfs2_rgrpd, rd_node);
+ gl = rgd->rd_gl;
+
+ rb_erase(n, &sdp->sd_rindex_tree);
+
+ if (gl) {
+ spin_lock(&gl->gl_spin);
+ gl->gl_object = NULL;
+ spin_unlock(&gl->gl_spin);
+ gfs2_glock_add_to_lru(gl);
+ gfs2_glock_put(gl);
+ }
+
+ gfs2_free_clones(rgd);
+ kfree(rgd->rd_bits);
+ kmem_cache_free(gfs2_rgrpd_cachep, rgd);
+ }
}
static void gfs2_rindex_print(const struct gfs2_rgrpd *rgd)
@@ -524,22 +549,34 @@
return total_data;
}
-static void gfs2_rindex_in(struct gfs2_rgrpd *rgd, const void *buf)
+static void rgd_insert(struct gfs2_rgrpd *rgd)
{
- const struct gfs2_rindex *str = buf;
+ struct gfs2_sbd *sdp = rgd->rd_sbd;
+ struct rb_node **newn = &sdp->sd_rindex_tree.rb_node, *parent = NULL;
- rgd->rd_addr = be64_to_cpu(str->ri_addr);
- rgd->rd_length = be32_to_cpu(str->ri_length);
- rgd->rd_data0 = be64_to_cpu(str->ri_data0);
- rgd->rd_data = be32_to_cpu(str->ri_data);
- rgd->rd_bitbytes = be32_to_cpu(str->ri_bitbytes);
+ /* Figure out where to put new node */
+ while (*newn) {
+ struct gfs2_rgrpd *cur = rb_entry(*newn, struct gfs2_rgrpd,
+ rd_node);
+
+ parent = *newn;
+ if (rgd->rd_addr < cur->rd_addr)
+ newn = &((*newn)->rb_left);
+ else if (rgd->rd_addr > cur->rd_addr)
+ newn = &((*newn)->rb_right);
+ else
+ return;
+ }
+
+ rb_link_node(&rgd->rd_node, parent, newn);
+ rb_insert_color(&rgd->rd_node, &sdp->sd_rindex_tree);
}
/**
* read_rindex_entry - Pull in a new resource index entry from the disk
* @gl: The glock covering the rindex inode
*
- * Returns: 0 on success, error code otherwise
+ * Returns: 0 on success, > 0 on EOF, error code otherwise
*/
static int read_rindex_entry(struct gfs2_inode *ip,
@@ -547,44 +584,53 @@
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
loff_t pos = sdp->sd_rgrps * sizeof(struct gfs2_rindex);
- char buf[sizeof(struct gfs2_rindex)];
+ struct gfs2_rindex buf;
int error;
struct gfs2_rgrpd *rgd;
- error = gfs2_internal_read(ip, ra_state, buf, &pos,
+ if (pos >= i_size_read(&ip->i_inode))
+ return 1;
+
+ error = gfs2_internal_read(ip, ra_state, (char *)&buf, &pos,
sizeof(struct gfs2_rindex));
- if (!error)
- return 0;
- if (error != sizeof(struct gfs2_rindex)) {
- if (error > 0)
- error = -EIO;
- return error;
- }
+
+ if (error != sizeof(struct gfs2_rindex))
+ return (error == 0) ? 1 : error;
rgd = kmem_cache_zalloc(gfs2_rgrpd_cachep, GFP_NOFS);
error = -ENOMEM;
if (!rgd)
return error;
- mutex_init(&rgd->rd_mutex);
- lops_init_le(&rgd->rd_le, &gfs2_rg_lops);
rgd->rd_sbd = sdp;
+ rgd->rd_addr = be64_to_cpu(buf.ri_addr);
+ rgd->rd_length = be32_to_cpu(buf.ri_length);
+ rgd->rd_data0 = be64_to_cpu(buf.ri_data0);
+ rgd->rd_data = be32_to_cpu(buf.ri_data);
+ rgd->rd_bitbytes = be32_to_cpu(buf.ri_bitbytes);
- list_add_tail(&rgd->rd_list, &sdp->sd_rindex_list);
- list_add_tail(&rgd->rd_list_mru, &sdp->sd_rindex_mru_list);
-
- gfs2_rindex_in(rgd, buf);
error = compute_bitstructs(rgd);
if (error)
- return error;
+ goto fail;
error = gfs2_glock_get(sdp, rgd->rd_addr,
&gfs2_rgrp_glops, CREATE, &rgd->rd_gl);
if (error)
- return error;
+ goto fail;
rgd->rd_gl->gl_object = rgd;
rgd->rd_flags &= ~GFS2_RDF_UPTODATE;
+ if (rgd->rd_data > sdp->sd_max_rg_data)
+ sdp->sd_max_rg_data = rgd->rd_data;
+ spin_lock(&sdp->sd_rindex_spin);
+ rgd_insert(rgd);
+ sdp->sd_rgrps++;
+ spin_unlock(&sdp->sd_rindex_spin);
+ return error;
+
+fail:
+ kfree(rgd->rd_bits);
+ kmem_cache_free(gfs2_rgrpd_cachep, rgd);
return error;
}
@@ -595,40 +641,28 @@
* Returns: 0 on successful update, error code otherwise
*/
-int gfs2_ri_update(struct gfs2_inode *ip)
+static int gfs2_ri_update(struct gfs2_inode *ip)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct inode *inode = &ip->i_inode;
struct file_ra_state ra_state;
- u64 rgrp_count = i_size_read(inode);
- struct gfs2_rgrpd *rgd;
- unsigned int max_data = 0;
int error;
- do_div(rgrp_count, sizeof(struct gfs2_rindex));
- clear_rgrpdi(sdp);
-
file_ra_state_init(&ra_state, inode->i_mapping);
- for (sdp->sd_rgrps = 0; sdp->sd_rgrps < rgrp_count; sdp->sd_rgrps++) {
+ do {
error = read_rindex_entry(ip, &ra_state);
- if (error) {
- clear_rgrpdi(sdp);
- return error;
- }
- }
+ } while (error == 0);
- list_for_each_entry(rgd, &sdp->sd_rindex_list, rd_list)
- if (rgd->rd_data > max_data)
- max_data = rgd->rd_data;
- sdp->sd_max_rg_data = max_data;
+ if (error < 0)
+ return error;
+
sdp->sd_rindex_uptodate = 1;
return 0;
}
/**
- * gfs2_rindex_hold - Grab a lock on the rindex
+ * gfs2_rindex_update - Update the rindex if required
* @sdp: The GFS2 superblock
- * @ri_gh: the glock holder
*
* We grab a lock on the rindex inode to make sure that it doesn't
* change whilst we are performing an operation. We keep this lock
@@ -640,30 +674,29 @@
* special file, which might have been updated if someone expanded the
* filesystem (via gfs2_grow utility), which adds new resource groups.
*
- * Returns: 0 on success, error code otherwise
+ * Returns: 0 on succeess, error code otherwise
*/
-int gfs2_rindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ri_gh)
+int gfs2_rindex_update(struct gfs2_sbd *sdp)
{
struct gfs2_inode *ip = GFS2_I(sdp->sd_rindex);
struct gfs2_glock *gl = ip->i_gl;
- int error;
-
- error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, ri_gh);
- if (error)
- return error;
+ struct gfs2_holder ri_gh;
+ int error = 0;
/* Read new copy from disk if we don't have the latest */
if (!sdp->sd_rindex_uptodate) {
mutex_lock(&sdp->sd_rindex_mutex);
- if (!sdp->sd_rindex_uptodate) {
+ error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh);
+ if (error)
+ return error;
+ if (!sdp->sd_rindex_uptodate)
error = gfs2_ri_update(ip);
- if (error)
- gfs2_glock_dq_uninit(ri_gh);
- }
+ gfs2_glock_dq_uninit(&ri_gh);
mutex_unlock(&sdp->sd_rindex_mutex);
}
+
return error;
}
@@ -694,7 +727,7 @@
}
/**
- * gfs2_rgrp_bh_get - Read in a RG's header and bitmaps
+ * gfs2_rgrp_go_lock - Read in a RG's header and bitmaps
* @rgd: the struct gfs2_rgrpd describing the RG to read in
*
* Read in all of a Resource Group's header and bitmap blocks.
@@ -703,8 +736,9 @@
* Returns: errno
*/
-int gfs2_rgrp_bh_get(struct gfs2_rgrpd *rgd)
+int gfs2_rgrp_go_lock(struct gfs2_holder *gh)
{
+ struct gfs2_rgrpd *rgd = gh->gh_gl->gl_object;
struct gfs2_sbd *sdp = rgd->rd_sbd;
struct gfs2_glock *gl = rgd->rd_gl;
unsigned int length = rgd->rd_length;
@@ -712,17 +746,6 @@
unsigned int x, y;
int error;
- mutex_lock(&rgd->rd_mutex);
-
- spin_lock(&sdp->sd_rindex_spin);
- if (rgd->rd_bh_count) {
- rgd->rd_bh_count++;
- spin_unlock(&sdp->sd_rindex_spin);
- mutex_unlock(&rgd->rd_mutex);
- return 0;
- }
- spin_unlock(&sdp->sd_rindex_spin);
-
for (x = 0; x < length; x++) {
bi = rgd->rd_bits + x;
error = gfs2_meta_read(gl, rgd->rd_addr + x, 0, &bi->bi_bh);
@@ -747,15 +770,9 @@
clear_bit(GBF_FULL, &rgd->rd_bits[x].bi_flags);
gfs2_rgrp_in(rgd, (rgd->rd_bits[0].bi_bh)->b_data);
rgd->rd_flags |= (GFS2_RDF_UPTODATE | GFS2_RDF_CHECK);
+ rgd->rd_free_clone = rgd->rd_free;
}
- spin_lock(&sdp->sd_rindex_spin);
- rgd->rd_free_clone = rgd->rd_free;
- rgd->rd_bh_count++;
- spin_unlock(&sdp->sd_rindex_spin);
-
- mutex_unlock(&rgd->rd_mutex);
-
return 0;
fail:
@@ -765,52 +782,32 @@
bi->bi_bh = NULL;
gfs2_assert_warn(sdp, !bi->bi_clone);
}
- mutex_unlock(&rgd->rd_mutex);
return error;
}
-void gfs2_rgrp_bh_hold(struct gfs2_rgrpd *rgd)
-{
- struct gfs2_sbd *sdp = rgd->rd_sbd;
-
- spin_lock(&sdp->sd_rindex_spin);
- gfs2_assert_warn(rgd->rd_sbd, rgd->rd_bh_count);
- rgd->rd_bh_count++;
- spin_unlock(&sdp->sd_rindex_spin);
-}
-
/**
- * gfs2_rgrp_bh_put - Release RG bitmaps read in with gfs2_rgrp_bh_get()
+ * gfs2_rgrp_go_unlock - Release RG bitmaps read in with gfs2_rgrp_bh_get()
* @rgd: the struct gfs2_rgrpd describing the RG to read in
*
*/
-void gfs2_rgrp_bh_put(struct gfs2_rgrpd *rgd)
+void gfs2_rgrp_go_unlock(struct gfs2_holder *gh)
{
- struct gfs2_sbd *sdp = rgd->rd_sbd;
+ struct gfs2_rgrpd *rgd = gh->gh_gl->gl_object;
int x, length = rgd->rd_length;
- spin_lock(&sdp->sd_rindex_spin);
- gfs2_assert_warn(rgd->rd_sbd, rgd->rd_bh_count);
- if (--rgd->rd_bh_count) {
- spin_unlock(&sdp->sd_rindex_spin);
- return;
- }
-
for (x = 0; x < length; x++) {
struct gfs2_bitmap *bi = rgd->rd_bits + x;
- kfree(bi->bi_clone);
- bi->bi_clone = NULL;
brelse(bi->bi_bh);
bi->bi_bh = NULL;
}
- spin_unlock(&sdp->sd_rindex_spin);
}
-static void gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset,
- const struct gfs2_bitmap *bi)
+void gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset,
+ struct buffer_head *bh,
+ const struct gfs2_bitmap *bi)
{
struct super_block *sb = sdp->sd_vfs;
struct block_device *bdev = sb->s_bdev;
@@ -823,7 +820,7 @@
unsigned int x;
for (x = 0; x < bi->bi_len; x++) {
- const u8 *orig = bi->bi_bh->b_data + bi->bi_offset + x;
+ const u8 *orig = bh->b_data + bi->bi_offset + x;
const u8 *clone = bi->bi_clone + bi->bi_offset + x;
u8 diff = ~(*orig | (*orig >> 1)) & (*clone | (*clone >> 1));
diff &= 0x55;
@@ -862,28 +859,6 @@
sdp->sd_args.ar_discard = 0;
}
-void gfs2_rgrp_repolish_clones(struct gfs2_rgrpd *rgd)
-{
- struct gfs2_sbd *sdp = rgd->rd_sbd;
- unsigned int length = rgd->rd_length;
- unsigned int x;
-
- for (x = 0; x < length; x++) {
- struct gfs2_bitmap *bi = rgd->rd_bits + x;
- if (!bi->bi_clone)
- continue;
- if (sdp->sd_args.ar_discard)
- gfs2_rgrp_send_discards(sdp, rgd->rd_data0, bi);
- clear_bit(GBF_FULL, &bi->bi_flags);
- memcpy(bi->bi_clone + bi->bi_offset,
- bi->bi_bh->b_data + bi->bi_offset, bi->bi_len);
- }
-
- spin_lock(&sdp->sd_rindex_spin);
- rgd->rd_free_clone = rgd->rd_free;
- spin_unlock(&sdp->sd_rindex_spin);
-}
-
/**
* gfs2_alloc_get - get the struct gfs2_alloc structure for an inode
* @ip: the incore GFS2 inode structure
@@ -893,38 +868,35 @@
struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip)
{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ int error;
BUG_ON(ip->i_alloc != NULL);
ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_NOFS);
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ fs_warn(sdp, "rindex update returns %d\n", error);
return ip->i_alloc;
}
/**
* try_rgrp_fit - See if a given reservation will fit in a given RG
* @rgd: the RG data
- * @al: the struct gfs2_alloc structure describing the reservation
+ * @ip: the inode
*
* If there's room for the requested blocks to be allocated from the RG:
- * Sets the $al_rgd field in @al.
*
* Returns: 1 on success (it fits), 0 on failure (it doesn't fit)
*/
-static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al)
+static int try_rgrp_fit(const struct gfs2_rgrpd *rgd, const struct gfs2_inode *ip)
{
- struct gfs2_sbd *sdp = rgd->rd_sbd;
- int ret = 0;
+ const struct gfs2_alloc *al = ip->i_alloc;
if (rgd->rd_flags & (GFS2_RGF_NOALLOC | GFS2_RDF_ERROR))
return 0;
-
- spin_lock(&sdp->sd_rindex_spin);
- if (rgd->rd_free_clone >= al->al_requested) {
- al->al_rgd = rgd;
- ret = 1;
- }
- spin_unlock(&sdp->sd_rindex_spin);
-
- return ret;
+ if (rgd->rd_free_clone >= al->al_requested)
+ return 1;
+ return 0;
}
/**
@@ -992,76 +964,6 @@
}
/**
- * recent_rgrp_next - get next RG from "recent" list
- * @cur_rgd: current rgrp
- *
- * Returns: The next rgrp in the recent list
- */
-
-static struct gfs2_rgrpd *recent_rgrp_next(struct gfs2_rgrpd *cur_rgd)
-{
- struct gfs2_sbd *sdp = cur_rgd->rd_sbd;
- struct list_head *head;
- struct gfs2_rgrpd *rgd;
-
- spin_lock(&sdp->sd_rindex_spin);
- head = &sdp->sd_rindex_mru_list;
- if (unlikely(cur_rgd->rd_list_mru.next == head)) {
- spin_unlock(&sdp->sd_rindex_spin);
- return NULL;
- }
- rgd = list_entry(cur_rgd->rd_list_mru.next, struct gfs2_rgrpd, rd_list_mru);
- spin_unlock(&sdp->sd_rindex_spin);
- return rgd;
-}
-
-/**
- * forward_rgrp_get - get an rgrp to try next from full list
- * @sdp: The GFS2 superblock
- *
- * Returns: The rgrp to try next
- */
-
-static struct gfs2_rgrpd *forward_rgrp_get(struct gfs2_sbd *sdp)
-{
- struct gfs2_rgrpd *rgd;
- unsigned int journals = gfs2_jindex_size(sdp);
- unsigned int rg = 0, x;
-
- spin_lock(&sdp->sd_rindex_spin);
-
- rgd = sdp->sd_rindex_forward;
- if (!rgd) {
- if (sdp->sd_rgrps >= journals)
- rg = sdp->sd_rgrps * sdp->sd_jdesc->jd_jid / journals;
-
- for (x = 0, rgd = gfs2_rgrpd_get_first(sdp); x < rg;
- x++, rgd = gfs2_rgrpd_get_next(rgd))
- /* Do Nothing */;
-
- sdp->sd_rindex_forward = rgd;
- }
-
- spin_unlock(&sdp->sd_rindex_spin);
-
- return rgd;
-}
-
-/**
- * forward_rgrp_set - set the forward rgrp pointer
- * @sdp: the filesystem
- * @rgd: The new forward rgrp
- *
- */
-
-static void forward_rgrp_set(struct gfs2_sbd *sdp, struct gfs2_rgrpd *rgd)
-{
- spin_lock(&sdp->sd_rindex_spin);
- sdp->sd_rindex_forward = rgd;
- spin_unlock(&sdp->sd_rindex_spin);
-}
-
-/**
* get_local_rgrp - Choose and lock a rgrp for allocation
* @ip: the inode to reserve space for
* @rgp: the chosen and locked rgrp
@@ -1076,14 +978,18 @@
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrpd *rgd, *begin = NULL;
struct gfs2_alloc *al = ip->i_alloc;
- int flags = LM_FLAG_TRY;
- int skipped = 0;
- int loops = 0;
int error, rg_locked;
+ int loops = 0;
- rgd = gfs2_blk2rgrpd(sdp, ip->i_goal);
+ if (ip->i_rgd && rgrp_contains_block(ip->i_rgd, ip->i_goal))
+ rgd = begin = ip->i_rgd;
+ else
+ rgd = begin = gfs2_blk2rgrpd(sdp, ip->i_goal);
- while (rgd) {
+ if (rgd == NULL)
+ return -EBADSLT;
+
+ while (loops < 3) {
rg_locked = 0;
if (gfs2_glock_is_locked_by_me(rgd->rd_gl)) {
@@ -1095,92 +1001,36 @@
}
switch (error) {
case 0:
- if (try_rgrp_fit(rgd, al))
- goto out;
+ if (try_rgrp_fit(rgd, ip)) {
+ ip->i_rgd = rgd;
+ return 0;
+ }
if (rgd->rd_flags & GFS2_RDF_CHECK)
try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
/* fall through */
case GLR_TRYFAILED:
- rgd = recent_rgrp_next(rgd);
- break;
-
- default:
- return error;
- }
- }
-
- /* Go through full list of rgrps */
-
- begin = rgd = forward_rgrp_get(sdp);
-
- for (;;) {
- rg_locked = 0;
-
- if (gfs2_glock_is_locked_by_me(rgd->rd_gl)) {
- rg_locked = 1;
- error = 0;
- } else {
- error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, flags,
- &al->al_rgd_gh);
- }
- switch (error) {
- case 0:
- if (try_rgrp_fit(rgd, al))
- goto out;
- if (rgd->rd_flags & GFS2_RDF_CHECK)
- try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
- if (!rg_locked)
- gfs2_glock_dq_uninit(&al->al_rgd_gh);
- break;
-
- case GLR_TRYFAILED:
- skipped++;
- break;
-
- default:
- return error;
- }
-
- rgd = gfs2_rgrpd_get_next(rgd);
- if (!rgd)
- rgd = gfs2_rgrpd_get_first(sdp);
-
- if (rgd == begin) {
- if (++loops >= 3)
- return -ENOSPC;
- if (!skipped)
+ rgd = gfs2_rgrpd_get_next(rgd);
+ if (rgd == begin)
loops++;
- flags = 0;
- if (loops == 2)
- gfs2_log_flush(sdp, NULL);
+ break;
+ default:
+ return error;
}
}
-out:
- if (begin) {
- spin_lock(&sdp->sd_rindex_spin);
- list_move(&rgd->rd_list_mru, &sdp->sd_rindex_mru_list);
- spin_unlock(&sdp->sd_rindex_spin);
- rgd = gfs2_rgrpd_get_next(rgd);
- if (!rgd)
- rgd = gfs2_rgrpd_get_first(sdp);
- forward_rgrp_set(sdp, rgd);
- }
-
- return 0;
+ return -ENOSPC;
}
/**
- * gfs2_inplace_reserve_i - Reserve space in the filesystem
+ * gfs2_inplace_reserve - Reserve space in the filesystem
* @ip: the inode to reserve space for
*
* Returns: errno
*/
-int gfs2_inplace_reserve_i(struct gfs2_inode *ip, int hold_rindex,
- char *file, unsigned int line)
+int gfs2_inplace_reserve(struct gfs2_inode *ip)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_alloc *al = ip->i_alloc;
@@ -1191,45 +1041,22 @@
if (gfs2_assert_warn(sdp, al->al_requested))
return -EINVAL;
- if (hold_rindex) {
- /* We need to hold the rindex unless the inode we're using is
- the rindex itself, in which case it's already held. */
- if (ip != GFS2_I(sdp->sd_rindex))
- error = gfs2_rindex_hold(sdp, &al->al_ri_gh);
- else if (!sdp->sd_rgrps) /* We may not have the rindex read
- in, so: */
- error = gfs2_ri_update(ip);
- if (error)
- return error;
- }
-
-try_again:
do {
error = get_local_rgrp(ip, &last_unlinked);
- /* If there is no space, flushing the log may release some */
- if (error) {
- if (ip == GFS2_I(sdp->sd_rindex) &&
- !sdp->sd_rindex_uptodate) {
- error = gfs2_ri_update(ip);
- if (error)
- return error;
- goto try_again;
- }
- gfs2_log_flush(sdp, NULL);
+ if (error != -ENOSPC)
+ break;
+ /* Check that fs hasn't grown if writing to rindex */
+ if (ip == GFS2_I(sdp->sd_rindex) && !sdp->sd_rindex_uptodate) {
+ error = gfs2_ri_update(ip);
+ if (error)
+ break;
+ continue;
}
- } while (error && tries++ < 3);
+ /* Flushing the log may release space */
+ gfs2_log_flush(sdp, NULL);
+ } while (tries++ < 3);
- if (error) {
- if (hold_rindex && ip != GFS2_I(sdp->sd_rindex))
- gfs2_glock_dq_uninit(&al->al_ri_gh);
- return error;
- }
-
- /* no error, so we have the rgrp set in the inode's allocation. */
- al->al_file = file;
- al->al_line = line;
-
- return 0;
+ return error;
}
/**
@@ -1241,20 +1068,10 @@
void gfs2_inplace_release(struct gfs2_inode *ip)
{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_alloc *al = ip->i_alloc;
- if (gfs2_assert_warn(sdp, al->al_alloced <= al->al_requested) == -1)
- fs_warn(sdp, "al_alloced = %u, al_requested = %u "
- "al_file = %s, al_line = %u\n",
- al->al_alloced, al->al_requested, al->al_file,
- al->al_line);
-
- al->al_rgd = NULL;
if (al->al_rgd_gh.gh_gl)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
- if (ip != GFS2_I(sdp->sd_rindex) && al->al_ri_gh.gh_gl)
- gfs2_glock_dq_uninit(&al->al_ri_gh);
}
/**
@@ -1352,6 +1169,7 @@
/* The GFS2_BLKST_UNLINKED state doesn't apply to the clone
bitmaps, so we must search the originals for that. */
buffer = bi->bi_bh->b_data + bi->bi_offset;
+ WARN_ON(!buffer_uptodate(bi->bi_bh));
if (old_state != GFS2_BLKST_UNLINKED && bi->bi_clone)
buffer = bi->bi_clone + bi->bi_offset;
@@ -1371,6 +1189,7 @@
if (blk == BFITNOENT)
return blk;
+
*n = 1;
if (old_state == new_state)
goto out;
@@ -1503,7 +1322,7 @@
if (al == NULL)
return -ECANCELED;
- rgd = al->al_rgd;
+ rgd = ip->i_rgd;
if (rgrp_contains_block(rgd, ip->i_goal))
goal = ip->i_goal - rgd->rd_data0;
@@ -1518,7 +1337,7 @@
rgd->rd_last_alloc = blk;
block = rgd->rd_data0 + blk;
- ip->i_goal = block;
+ ip->i_goal = block + *n - 1;
error = gfs2_meta_inode_buffer(ip, &dibh);
if (error == 0) {
struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
@@ -1539,9 +1358,7 @@
gfs2_statfs_change(sdp, 0, -(s64)*n, 0);
gfs2_quota_change(ip, *n, ip->i_inode.i_uid, ip->i_inode.i_gid);
- spin_lock(&sdp->sd_rindex_spin);
rgd->rd_free_clone -= *n;
- spin_unlock(&sdp->sd_rindex_spin);
trace_gfs2_block_alloc(ip, block, *n, GFS2_BLKST_USED);
*bn = block;
return 0;
@@ -1564,7 +1381,7 @@
{
struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
struct gfs2_alloc *al = dip->i_alloc;
- struct gfs2_rgrpd *rgd = al->al_rgd;
+ struct gfs2_rgrpd *rgd = dip->i_rgd;
u32 blk;
u64 block;
unsigned int n = 1;
@@ -1594,9 +1411,7 @@
gfs2_statfs_change(sdp, 0, -1, +1);
gfs2_trans_add_unrevoke(sdp, block, 1);
- spin_lock(&sdp->sd_rindex_spin);
rgd->rd_free_clone--;
- spin_unlock(&sdp->sd_rindex_spin);
trace_gfs2_block_alloc(dip, block, 1, GFS2_BLKST_DINODE);
*bn = block;
return 0;
@@ -1629,8 +1444,6 @@
gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
- gfs2_trans_add_rg(rgd);
-
/* Directories keep their data in the metadata address space */
if (meta || ip->i_depth)
gfs2_meta_wipe(ip, bstart, blen);
@@ -1666,7 +1479,6 @@
trace_gfs2_block_alloc(ip, blkno, 1, GFS2_BLKST_UNLINKED);
gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
- gfs2_trans_add_rg(rgd);
}
static void gfs2_free_uninit_di(struct gfs2_rgrpd *rgd, u64 blkno)
@@ -1688,7 +1500,6 @@
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
gfs2_statfs_change(sdp, 0, +1, -1);
- gfs2_trans_add_rg(rgd);
}
@@ -1714,41 +1525,33 @@
int gfs2_check_blk_type(struct gfs2_sbd *sdp, u64 no_addr, unsigned int type)
{
struct gfs2_rgrpd *rgd;
- struct gfs2_holder ri_gh, rgd_gh;
- struct gfs2_inode *ip = GFS2_I(sdp->sd_rindex);
- int ri_locked = 0;
+ struct gfs2_holder rgd_gh;
int error;
- if (!gfs2_glock_is_locked_by_me(ip->i_gl)) {
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- goto fail;
- ri_locked = 1;
- }
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
error = -EINVAL;
rgd = gfs2_blk2rgrpd(sdp, no_addr);
if (!rgd)
- goto fail_rindex;
+ goto fail;
error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_SHARED, 0, &rgd_gh);
if (error)
- goto fail_rindex;
+ goto fail;
if (gfs2_get_block_type(rgd, no_addr) != type)
error = -ESTALE;
gfs2_glock_dq_uninit(&rgd_gh);
-fail_rindex:
- if (ri_locked)
- gfs2_glock_dq_uninit(&ri_gh);
fail:
return error;
}
/**
* gfs2_rlist_add - add a RG to a list of RGs
- * @sdp: the filesystem
+ * @ip: the inode
* @rlist: the list of resource groups
* @block: the block
*
@@ -1758,9 +1561,10 @@
*
*/
-void gfs2_rlist_add(struct gfs2_sbd *sdp, struct gfs2_rgrp_list *rlist,
+void gfs2_rlist_add(struct gfs2_inode *ip, struct gfs2_rgrp_list *rlist,
u64 block)
{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrpd *rgd;
struct gfs2_rgrpd **tmp;
unsigned int new_space;
@@ -1769,12 +1573,15 @@
if (gfs2_assert_warn(sdp, !rlist->rl_ghs))
return;
- rgd = gfs2_blk2rgrpd(sdp, block);
+ if (ip->i_rgd && rgrp_contains_block(ip->i_rgd, block))
+ rgd = ip->i_rgd;
+ else
+ rgd = gfs2_blk2rgrpd(sdp, block);
if (!rgd) {
- if (gfs2_consist(sdp))
- fs_err(sdp, "block = %llu\n", (unsigned long long)block);
+ fs_err(sdp, "rlist_add: no rgrp for block %llu\n", (unsigned long long)block);
return;
}
+ ip->i_rgd = rgd;
for (x = 0; x < rlist->rl_rgrps; x++)
if (rlist->rl_rgd[x] == rgd)
diff --git a/fs/gfs2/rgrp.h b/fs/gfs2/rgrp.h
index d253f9a..cf5c501 100644
--- a/fs/gfs2/rgrp.h
+++ b/fs/gfs2/rgrp.h
@@ -18,18 +18,15 @@
extern void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd);
-struct gfs2_rgrpd *gfs2_blk2rgrpd(struct gfs2_sbd *sdp, u64 blk);
-struct gfs2_rgrpd *gfs2_rgrpd_get_first(struct gfs2_sbd *sdp);
-struct gfs2_rgrpd *gfs2_rgrpd_get_next(struct gfs2_rgrpd *rgd);
+extern struct gfs2_rgrpd *gfs2_blk2rgrpd(struct gfs2_sbd *sdp, u64 blk);
+extern struct gfs2_rgrpd *gfs2_rgrpd_get_first(struct gfs2_sbd *sdp);
+extern struct gfs2_rgrpd *gfs2_rgrpd_get_next(struct gfs2_rgrpd *rgd);
extern void gfs2_clear_rgrpd(struct gfs2_sbd *sdp);
-extern int gfs2_rindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ri_gh);
-
-extern int gfs2_rgrp_bh_get(struct gfs2_rgrpd *rgd);
-extern void gfs2_rgrp_bh_hold(struct gfs2_rgrpd *rgd);
-extern void gfs2_rgrp_bh_put(struct gfs2_rgrpd *rgd);
-
-extern void gfs2_rgrp_repolish_clones(struct gfs2_rgrpd *rgd);
+extern int gfs2_rindex_update(struct gfs2_sbd *sdp);
+extern void gfs2_free_clones(struct gfs2_rgrpd *rgd);
+extern int gfs2_rgrp_go_lock(struct gfs2_holder *gh);
+extern void gfs2_rgrp_go_unlock(struct gfs2_holder *gh);
extern struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip);
static inline void gfs2_alloc_put(struct gfs2_inode *ip)
@@ -39,16 +36,9 @@
ip->i_alloc = NULL;
}
-extern int gfs2_inplace_reserve_i(struct gfs2_inode *ip, int hold_rindex,
- char *file, unsigned int line);
-#define gfs2_inplace_reserve(ip) \
- gfs2_inplace_reserve_i((ip), 1, __FILE__, __LINE__)
-#define gfs2_inplace_reserve_ri(ip) \
- gfs2_inplace_reserve_i((ip), 0, __FILE__, __LINE__)
-
+extern int gfs2_inplace_reserve(struct gfs2_inode *ip);
extern void gfs2_inplace_release(struct gfs2_inode *ip);
-extern int gfs2_ri_update(struct gfs2_inode *ip);
extern int gfs2_alloc_block(struct gfs2_inode *ip, u64 *bn, unsigned int *n);
extern int gfs2_alloc_di(struct gfs2_inode *ip, u64 *bn, u64 *generation);
@@ -66,11 +56,14 @@
struct gfs2_holder *rl_ghs;
};
-extern void gfs2_rlist_add(struct gfs2_sbd *sdp, struct gfs2_rgrp_list *rlist,
+extern void gfs2_rlist_add(struct gfs2_inode *ip, struct gfs2_rgrp_list *rlist,
u64 block);
extern void gfs2_rlist_alloc(struct gfs2_rgrp_list *rlist, unsigned int state);
extern void gfs2_rlist_free(struct gfs2_rgrp_list *rlist);
extern u64 gfs2_ri_total(struct gfs2_sbd *sdp);
extern int gfs2_rgrp_dump(struct seq_file *seq, const struct gfs2_glock *gl);
+extern void gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset,
+ struct buffer_head *bh,
+ const struct gfs2_bitmap *bi);
#endif /* __RGRP_DOT_H__ */
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index b7beadd..71e4209 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -752,47 +752,15 @@
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct address_space *metamapping = gfs2_glock2aspace(ip->i_gl);
struct backing_dev_info *bdi = metamapping->backing_dev_info;
- struct gfs2_holder gh;
- struct buffer_head *bh;
- struct timespec atime;
- struct gfs2_dinode *di;
- int ret = -EAGAIN;
- int unlock_required = 0;
+ int ret = 0;
- /* Skip timestamp update, if this is from a memalloc */
- if (current->flags & PF_MEMALLOC)
- goto do_flush;
- if (!gfs2_glock_is_locked_by_me(ip->i_gl)) {
- ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
- if (ret)
- goto do_flush;
- unlock_required = 1;
- }
- ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
- if (ret)
- goto do_unlock;
- ret = gfs2_meta_inode_buffer(ip, &bh);
- if (ret == 0) {
- di = (struct gfs2_dinode *)bh->b_data;
- atime.tv_sec = be64_to_cpu(di->di_atime);
- atime.tv_nsec = be32_to_cpu(di->di_atime_nsec);
- if (timespec_compare(&inode->i_atime, &atime) > 0) {
- gfs2_trans_add_bh(ip->i_gl, bh, 1);
- gfs2_dinode_out(ip, bh->b_data);
- }
- brelse(bh);
- }
- gfs2_trans_end(sdp);
-do_unlock:
- if (unlock_required)
- gfs2_glock_dq_uninit(&gh);
-do_flush:
if (wbc->sync_mode == WB_SYNC_ALL)
gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
- filemap_fdatawrite(metamapping);
if (bdi->dirty_exceeded)
gfs2_ail1_flush(sdp, wbc);
- if (!ret && (wbc->sync_mode == WB_SYNC_ALL))
+ else
+ filemap_fdatawrite(metamapping);
+ if (wbc->sync_mode == WB_SYNC_ALL)
ret = filemap_fdatawait(metamapping);
if (ret)
mark_inode_dirty_sync(inode);
@@ -800,6 +768,64 @@
}
/**
+ * gfs2_dirty_inode - check for atime updates
+ * @inode: The inode in question
+ * @flags: The type of dirty
+ *
+ * Unfortunately it can be called under any combination of inode
+ * glock and transaction lock, so we have to check carefully.
+ *
+ * At the moment this deals only with atime - it should be possible
+ * to expand that role in future, once a review of the locking has
+ * been carried out.
+ */
+
+static void gfs2_dirty_inode(struct inode *inode, int flags)
+{
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct buffer_head *bh;
+ struct gfs2_holder gh;
+ int need_unlock = 0;
+ int need_endtrans = 0;
+ int ret;
+
+ if (!(flags & (I_DIRTY_DATASYNC|I_DIRTY_SYNC)))
+ return;
+
+ if (!gfs2_glock_is_locked_by_me(ip->i_gl)) {
+ ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+ if (ret) {
+ fs_err(sdp, "dirty_inode: glock %d\n", ret);
+ return;
+ }
+ need_unlock = 1;
+ }
+
+ if (current->journal_info == NULL) {
+ ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
+ if (ret) {
+ fs_err(sdp, "dirty_inode: gfs2_trans_begin %d\n", ret);
+ goto out;
+ }
+ need_endtrans = 1;
+ }
+
+ ret = gfs2_meta_inode_buffer(ip, &bh);
+ if (ret == 0) {
+ gfs2_trans_add_bh(ip->i_gl, bh, 1);
+ gfs2_dinode_out(ip, bh->b_data);
+ brelse(bh);
+ }
+
+ if (need_endtrans)
+ gfs2_trans_end(sdp);
+out:
+ if (need_unlock)
+ gfs2_glock_dq_uninit(&gh);
+}
+
+/**
* gfs2_make_fs_ro - Turn a Read-Write FS into a Read-Only one
* @sdp: the filesystem
*
@@ -1011,7 +1037,6 @@
static int gfs2_statfs_slow(struct gfs2_sbd *sdp, struct gfs2_statfs_change_host *sc)
{
- struct gfs2_holder ri_gh;
struct gfs2_rgrpd *rgd_next;
struct gfs2_holder *gha, *gh;
unsigned int slots = 64;
@@ -1024,10 +1049,6 @@
if (!gha)
return -ENOMEM;
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- goto out;
-
rgd_next = gfs2_rgrpd_get_first(sdp);
for (;;) {
@@ -1070,9 +1091,6 @@
yield();
}
- gfs2_glock_dq_uninit(&ri_gh);
-
-out:
kfree(gha);
return error;
}
@@ -1124,6 +1142,10 @@
struct gfs2_statfs_change_host sc;
int error;
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
+
if (gfs2_tune_get(sdp, gt_statfs_slow))
error = gfs2_statfs_slow(sdp, &sc);
else
@@ -1394,21 +1416,17 @@
if (error)
goto out;
- error = gfs2_rindex_hold(sdp, &al->al_ri_gh);
- if (error)
- goto out_qs;
-
rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
if (!rgd) {
gfs2_consist_inode(ip);
error = -EIO;
- goto out_rindex_relse;
+ goto out_qs;
}
error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0,
&al->al_rgd_gh);
if (error)
- goto out_rindex_relse;
+ goto out_qs;
error = gfs2_trans_begin(sdp, RES_RG_BIT + RES_STATFS + RES_QUOTA,
sdp->sd_jdesc->jd_blocks);
@@ -1423,8 +1441,6 @@
out_rg_gunlock:
gfs2_glock_dq_uninit(&al->al_rgd_gh);
-out_rindex_relse:
- gfs2_glock_dq_uninit(&al->al_ri_gh);
out_qs:
gfs2_quota_unhold(ip);
out:
@@ -1471,9 +1487,11 @@
goto out;
}
- error = gfs2_check_blk_type(sdp, ip->i_no_addr, GFS2_BLKST_UNLINKED);
- if (error)
- goto out_truncate;
+ if (!test_bit(GIF_ALLOC_FAILED, &ip->i_flags)) {
+ error = gfs2_check_blk_type(sdp, ip->i_no_addr, GFS2_BLKST_UNLINKED);
+ if (error)
+ goto out_truncate;
+ }
if (test_bit(GIF_INVALID, &ip->i_flags)) {
error = gfs2_inode_refresh(ip);
@@ -1513,6 +1531,10 @@
goto out_unlock;
out_truncate:
+ gfs2_log_flush(sdp, ip->i_gl);
+ write_inode_now(inode, 1);
+ gfs2_ail_flush(ip->i_gl, 0);
+
/* Case 2 starts here */
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
@@ -1552,6 +1574,7 @@
if (ip) {
ip->i_flags = 0;
ip->i_gl = NULL;
+ ip->i_rgd = NULL;
}
return &ip->i_inode;
}
@@ -1572,6 +1595,7 @@
.alloc_inode = gfs2_alloc_inode,
.destroy_inode = gfs2_destroy_inode,
.write_inode = gfs2_write_inode,
+ .dirty_inode = gfs2_dirty_inode,
.evict_inode = gfs2_evict_inode,
.put_super = gfs2_put_super,
.sync_fs = gfs2_sync_fs,
diff --git a/fs/gfs2/trans.c b/fs/gfs2/trans.c
index 9ec73a8..86ac75d 100644
--- a/fs/gfs2/trans.c
+++ b/fs/gfs2/trans.c
@@ -185,8 +185,3 @@
gfs2_log_unlock(sdp);
}
-void gfs2_trans_add_rg(struct gfs2_rgrpd *rgd)
-{
- lops_add(rgd->rd_sbd, &rgd->rd_le);
-}
-
diff --git a/fs/gfs2/trans.h b/fs/gfs2/trans.h
index fb56b78..f8f101e 100644
--- a/fs/gfs2/trans.h
+++ b/fs/gfs2/trans.h
@@ -28,20 +28,20 @@
/* reserve either the number of blocks to be allocated plus the rg header
* block, or all of the blocks in the rg, whichever is smaller */
-static inline unsigned int gfs2_rg_blocks(const struct gfs2_alloc *al)
+static inline unsigned int gfs2_rg_blocks(const struct gfs2_inode *ip)
{
- return (al->al_requested < al->al_rgd->rd_length)?
- al->al_requested + 1 : al->al_rgd->rd_length;
+ const struct gfs2_alloc *al = ip->i_alloc;
+ if (al->al_requested < ip->i_rgd->rd_length)
+ return al->al_requested + 1;
+ return ip->i_rgd->rd_length;
}
-int gfs2_trans_begin(struct gfs2_sbd *sdp, unsigned int blocks,
- unsigned int revokes);
+extern int gfs2_trans_begin(struct gfs2_sbd *sdp, unsigned int blocks,
+ unsigned int revokes);
-void gfs2_trans_end(struct gfs2_sbd *sdp);
-
-void gfs2_trans_add_bh(struct gfs2_glock *gl, struct buffer_head *bh, int meta);
-void gfs2_trans_add_revoke(struct gfs2_sbd *sdp, struct gfs2_bufdata *bd);
-void gfs2_trans_add_unrevoke(struct gfs2_sbd *sdp, u64 blkno, unsigned int len);
-void gfs2_trans_add_rg(struct gfs2_rgrpd *rgd);
+extern void gfs2_trans_end(struct gfs2_sbd *sdp);
+extern void gfs2_trans_add_bh(struct gfs2_glock *gl, struct buffer_head *bh, int meta);
+extern void gfs2_trans_add_revoke(struct gfs2_sbd *sdp, struct gfs2_bufdata *bd);
+extern void gfs2_trans_add_unrevoke(struct gfs2_sbd *sdp, u64 blkno, unsigned int len);
#endif /* __TRANS_DOT_H__ */
diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c
index 439b61c0..71d7bf8 100644
--- a/fs/gfs2/xattr.c
+++ b/fs/gfs2/xattr.c
@@ -332,15 +332,8 @@
if (error)
goto out_alloc;
- error = gfs2_rindex_hold(GFS2_SB(&ip->i_inode), &al->al_ri_gh);
- if (error)
- goto out_quota;
-
error = ea_dealloc_unstuffed(ip, bh, ea, prev, (leave) ? &error : NULL);
- gfs2_glock_dq_uninit(&al->al_ri_gh);
-
-out_quota:
gfs2_quota_unhold(ip);
out_alloc:
gfs2_alloc_put(ip);
@@ -734,7 +727,7 @@
goto out_gunlock_q;
error = gfs2_trans_begin(GFS2_SB(&ip->i_inode),
- blks + gfs2_rg_blocks(al) +
+ blks + gfs2_rg_blocks(ip) +
RES_DINODE + RES_STATFS + RES_QUOTA, 0);
if (error)
goto out_ipres;
@@ -1296,7 +1289,8 @@
int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct inode *inode = &ip->i_inode;
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
struct gfs2_ea_location el;
int error;
@@ -1319,7 +1313,7 @@
if (error)
return error;
- error = gfs2_setattr_simple(ip, attr);
+ error = gfs2_setattr_simple(inode, attr);
gfs2_trans_end(sdp);
return error;
}
@@ -1362,14 +1356,14 @@
blen++;
else {
if (bstart)
- gfs2_rlist_add(sdp, &rlist, bstart);
+ gfs2_rlist_add(ip, &rlist, bstart);
bstart = bn;
blen = 1;
}
blks++;
}
if (bstart)
- gfs2_rlist_add(sdp, &rlist, bstart);
+ gfs2_rlist_add(ip, &rlist, bstart);
else
goto out;
@@ -1501,24 +1495,18 @@
if (error)
goto out_alloc;
- error = gfs2_rindex_hold(GFS2_SB(&ip->i_inode), &al->al_ri_gh);
- if (error)
- goto out_quota;
-
error = ea_foreach(ip, ea_dealloc_unstuffed, NULL);
if (error)
- goto out_rindex;
+ goto out_quota;
if (ip->i_diskflags & GFS2_DIF_EA_INDIRECT) {
error = ea_dealloc_indirect(ip);
if (error)
- goto out_rindex;
+ goto out_quota;
}
error = ea_dealloc_block(ip);
-out_rindex:
- gfs2_glock_dq_uninit(&al->al_ri_gh);
out_quota:
gfs2_quota_unhold(ip);
out_alloc:
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 3ebc437..1cbdeea 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -46,11 +46,26 @@
case HFS_EXT_CNID:
hfs_inode_read_fork(tree->inode, mdb->drXTExtRec, mdb->drXTFlSize,
mdb->drXTFlSize, be32_to_cpu(mdb->drXTClpSiz));
+ if (HFS_I(tree->inode)->alloc_blocks >
+ HFS_I(tree->inode)->first_blocks) {
+ printk(KERN_ERR "hfs: invalid btree extent records\n");
+ unlock_new_inode(tree->inode);
+ goto free_inode;
+ }
+
tree->inode->i_mapping->a_ops = &hfs_btree_aops;
break;
case HFS_CAT_CNID:
hfs_inode_read_fork(tree->inode, mdb->drCTExtRec, mdb->drCTFlSize,
mdb->drCTFlSize, be32_to_cpu(mdb->drCTClpSiz));
+
+ if (!HFS_I(tree->inode)->first_blocks) {
+ printk(KERN_ERR "hfs: invalid btree extent records "
+ "(0 size).\n");
+ unlock_new_inode(tree->inode);
+ goto free_inode;
+ }
+
tree->inode->i_mapping->a_ops = &hfs_btree_aops;
break;
default:
@@ -59,11 +74,6 @@
}
unlock_new_inode(tree->inode);
- if (!HFS_I(tree->inode)->first_blocks) {
- printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n");
- goto free_inode;
- }
-
mapping = tree->inode->i_mapping;
page = read_mapping_page(mapping, 0, NULL);
if (IS_ERR(page))
diff --git a/fs/hfs/dir.c b/fs/hfs/dir.c
index b4d70b1..bce4eef 100644
--- a/fs/hfs/dir.c
+++ b/fs/hfs/dir.c
@@ -198,7 +198,7 @@
res = hfs_cat_create(inode->i_ino, dir, &dentry->d_name, inode);
if (res) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfs_delete_inode(inode);
iput(inode);
return res;
@@ -227,7 +227,7 @@
res = hfs_cat_create(inode->i_ino, dir, &dentry->d_name, inode);
if (res) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfs_delete_inode(inode);
iput(inode);
return res;
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 96a1b62..a1a9fdc 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -183,7 +183,7 @@
inode->i_mode = mode;
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
HFS_I(inode)->flags = 0;
HFS_I(inode)->rsrc_inode = NULL;
@@ -313,7 +313,7 @@
/* Initialize the inode */
inode->i_uid = hsb->s_uid;
inode->i_gid = hsb->s_gid;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
if (idata->key)
HFS_I(inode)->cat_key = *idata->key;
diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c
index 25b2443..4536cd3 100644
--- a/fs/hfsplus/dir.c
+++ b/fs/hfsplus/dir.c
@@ -415,7 +415,7 @@
goto out;
out_err:
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfsplus_delete_inode(inode);
iput(inode);
out:
@@ -440,7 +440,7 @@
res = hfsplus_create_cat(inode->i_ino, dir, &dentry->d_name, inode);
if (res) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfsplus_delete_inode(inode);
iput(inode);
goto out;
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 4cc1e3a..40e1413 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -391,7 +391,7 @@
inode->i_mode = mode;
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
hip = HFSPLUS_I(inode);
@@ -512,7 +512,7 @@
hfs_bnode_read(fd->bnode, &entry, fd->entryoffset,
sizeof(struct hfsplus_cat_folder));
hfsplus_get_perms(inode, &folder->permissions, 1);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_size = 2 + be32_to_cpu(folder->valence);
inode->i_atime = hfsp_mt2ut(folder->access_date);
inode->i_mtime = hfsp_mt2ut(folder->content_mod_date);
@@ -532,11 +532,11 @@
hfsplus_inode_read_fork(inode, HFSPLUS_IS_RSRC(inode) ?
&file->rsrc_fork : &file->data_fork);
hfsplus_get_perms(inode, &file->permissions, 0);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
if (S_ISREG(inode->i_mode)) {
if (file->permissions.dev)
- inode->i_nlink =
- be32_to_cpu(file->permissions.dev);
+ set_nlink(inode,
+ be32_to_cpu(file->permissions.dev));
inode->i_op = &hfsplus_file_inode_operations;
inode->i_fop = &hfsplus_file_operations;
inode->i_mapping->a_ops = &hfsplus_aops;
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 0d22afd..2f72da5 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -541,7 +541,7 @@
ino->i_ino = st.ino;
ino->i_mode = st.mode;
- ino->i_nlink = st.nlink;
+ set_nlink(ino, st.nlink);
ino->i_uid = st.uid;
ino->i_gid = st.gid;
ino->i_atime = st.atime;
diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c
index d51a9838..dd7bc38 100644
--- a/fs/hostfs/hostfs_user.c
+++ b/fs/hostfs/hostfs_user.c
@@ -16,7 +16,6 @@
#include <sys/vfs.h>
#include "hostfs.h"
#include "os.h"
-#include "user.h"
#include <utime.h>
static void stat64_to_hostfs(const struct stat64 *buf, struct hostfs_stat *p)
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index 96a8ed9..2fa0089 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -247,7 +247,7 @@
result->i_mode &= ~0111;
result->i_op = &hpfs_file_iops;
result->i_fop = &hpfs_file_ops;
- result->i_nlink = 1;
+ set_nlink(result, 1);
}
unlock_new_inode(result);
}
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index 331b5e2..de94617 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -311,8 +311,8 @@
/* super.c */
-void hpfs_error(struct super_block *, const char *, ...)
- __attribute__((format (printf, 2, 3)));
+__printf(2, 3)
+void hpfs_error(struct super_block *, const char *, ...);
int hpfs_stop_cycles(struct super_block *, int, int *, int *, char *);
unsigned hpfs_count_one_bitmap(struct super_block *, secno);
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 338cd83..3b2cec2 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -53,7 +53,7 @@
i->i_mode &= ~0111;
i->i_op = &hpfs_file_iops;
i->i_fop = &hpfs_file_ops;
- i->i_nlink = 0;*/
+ clear_nlink(i);*/
make_bad_inode(i);
return;
}
@@ -77,7 +77,7 @@
i->i_mode = S_IFLNK | 0777;
i->i_op = &page_symlink_inode_operations;
i->i_data.a_ops = &hpfs_symlink_aops;
- i->i_nlink = 1;
+ set_nlink(i, 1);
i->i_size = ea_size;
i->i_blocks = 1;
brelse(bh);
@@ -101,7 +101,7 @@
}
if (S_ISBLK(mode) || S_ISCHR(mode) || S_ISFIFO(mode) || S_ISSOCK(mode)) {
brelse(bh);
- i->i_nlink = 1;
+ set_nlink(i, 1);
i->i_size = 0;
i->i_blocks = 1;
init_special_inode(i, mode,
@@ -125,13 +125,13 @@
hpfs_count_dnodes(i->i_sb, hpfs_inode->i_dno, &n_dnodes, &n_subdirs, NULL);
i->i_blocks = 4 * n_dnodes;
i->i_size = 2048 * n_dnodes;
- i->i_nlink = 2 + n_subdirs;
+ set_nlink(i, 2 + n_subdirs);
} else {
i->i_mode |= S_IFREG;
if (!hpfs_inode->i_ea_mode) i->i_mode &= ~0111;
i->i_op = &hpfs_file_iops;
i->i_fop = &hpfs_file_ops;
- i->i_nlink = 1;
+ set_nlink(i, 1);
i->i_size = le32_to_cpu(fnode->file_size);
i->i_blocks = ((i->i_size + 511) >> 9) + 1;
i->i_data.a_ops = &hpfs_aops;
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index 2df69e2..ea91fcb 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -56,7 +56,7 @@
result->i_fop = &hpfs_dir_ops;
result->i_blocks = 4;
result->i_size = 2048;
- result->i_nlink = 2;
+ set_nlink(result, 2);
if (dee.read_only)
result->i_mode &= ~0222;
@@ -150,7 +150,7 @@
result->i_mode &= ~0111;
result->i_op = &hpfs_file_iops;
result->i_fop = &hpfs_file_ops;
- result->i_nlink = 1;
+ set_nlink(result, 1);
hpfs_i(result)->i_parent_dir = dir->i_ino;
result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
result->i_ctime.tv_nsec = 0;
@@ -242,7 +242,7 @@
hpfs_i(result)->i_ea_size = 0;
result->i_uid = current_fsuid();
result->i_gid = current_fsgid();
- result->i_nlink = 1;
+ set_nlink(result, 1);
result->i_size = 0;
result->i_blocks = 1;
init_special_inode(result, mode, rdev);
@@ -318,7 +318,7 @@
result->i_uid = current_fsuid();
result->i_gid = current_fsgid();
result->i_blocks = 1;
- result->i_nlink = 1;
+ set_nlink(result, 1);
result->i_size = strlen(symlink);
result->i_op = &page_symlink_inode_operations;
result->i_data.a_ops = &hpfs_symlink_aops;
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 970ea98..f590b11 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -702,7 +702,7 @@
inode->i_ctime = proc_ino->i_ctime;
inode->i_ino = proc_ino->i_ino;
inode->i_mode = proc_ino->i_mode;
- inode->i_nlink = proc_ino->i_nlink;
+ set_nlink(inode, proc_ino->i_nlink);
inode->i_size = proc_ino->i_size;
inode->i_blocks = proc_ino->i_blocks;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index ec88953..0be5a78 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -970,7 +970,7 @@
d_instantiate(path.dentry, inode);
inode->i_size = size;
- inode->i_nlink = 0;
+ clear_nlink(inode);
error = -ENFILE;
file = alloc_file(&path, FMODE_WRITE | FMODE_READ,
diff --git a/fs/inode.c b/fs/inode.c
index ec79246..ee4e66b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -142,7 +142,7 @@
atomic_set(&inode->i_count, 1);
inode->i_op = &empty_iops;
inode->i_fop = &empty_fops;
- inode->i_nlink = 1;
+ inode->__i_nlink = 1;
inode->i_opflags = 0;
inode->i_uid = 0;
inode->i_gid = 0;
@@ -634,7 +634,7 @@
* inode to the back of the list so we don't spin on it.
*/
if (!spin_trylock(&inode->i_lock)) {
- list_move(&inode->i_lru, &sb->s_inode_lru);
+ list_move_tail(&inode->i_lru, &sb->s_inode_lru);
continue;
}
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index a5d0367..f9500595 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -20,6 +20,7 @@
#include <linux/statfs.h>
#include <linux/cdrom.h>
#include <linux/parser.h>
+#include <linux/mpage.h>
#include "isofs.h"
#include "zisofs.h"
@@ -1148,7 +1149,13 @@
static int isofs_readpage(struct file *file, struct page *page)
{
- return block_read_full_page(page,isofs_get_block);
+ return mpage_readpage(page, isofs_get_block);
+}
+
+static int isofs_readpages(struct file *file, struct address_space *mapping,
+ struct list_head *pages, unsigned nr_pages)
+{
+ return mpage_readpages(mapping, pages, nr_pages, isofs_get_block);
}
static sector_t _isofs_bmap(struct address_space *mapping, sector_t block)
@@ -1158,6 +1165,7 @@
static const struct address_space_operations isofs_aops = {
.readpage = isofs_readpage,
+ .readpages = isofs_readpages,
.bmap = _isofs_bmap
};
@@ -1319,7 +1327,7 @@
inode->i_mode = S_IFDIR | sbi->s_dmode;
else
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
- inode->i_nlink = 1; /*
+ set_nlink(inode, 1); /*
* Set to 1. We know there are 2, but
* the find utility tries to optimize
* if it is 2, and it screws up. It is
@@ -1337,7 +1345,7 @@
*/
inode->i_mode = S_IFREG | S_IRUGO | S_IXUGO;
}
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
inode->i_uid = sbi->s_uid;
inode->i_gid = sbi->s_gid;
diff --git a/fs/isofs/rock.c b/fs/isofs/rock.c
index 1fbc7de..70e79d0 100644
--- a/fs/isofs/rock.c
+++ b/fs/isofs/rock.c
@@ -363,7 +363,7 @@
break;
case SIG('P', 'X'):
inode->i_mode = isonum_733(rr->u.PX.mode);
- inode->i_nlink = isonum_733(rr->u.PX.n_links);
+ set_nlink(inode, isonum_733(rr->u.PX.n_links));
inode->i_uid = isonum_733(rr->u.PX.uid);
inode->i_gid = isonum_733(rr->u.PX.gid);
break;
@@ -496,7 +496,7 @@
goto out;
}
inode->i_mode = reloc->i_mode;
- inode->i_nlink = reloc->i_nlink;
+ set_nlink(inode, reloc->i_nlink);
inode->i_uid = reloc->i_uid;
inode->i_gid = reloc->i_gid;
inode->i_rdev = reloc->i_rdev;
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 9fe061f..fea8dd6 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1135,6 +1135,14 @@
goto out;
}
+ if (be32_to_cpu(sb->s_first) == 0 ||
+ be32_to_cpu(sb->s_first) >= journal->j_maxlen) {
+ printk(KERN_WARNING
+ "JBD: Invalid start block of journal: %u\n",
+ be32_to_cpu(sb->s_first));
+ goto out;
+ }
+
return 0;
out:
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index eef6979..68d704d 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -352,7 +352,7 @@
J_ASSERT(commit_transaction->t_state == T_RUNNING);
trace_jbd2_start_commit(journal, commit_transaction);
- jbd_debug(1, "JBD: starting commit of transaction %d\n",
+ jbd_debug(1, "JBD2: starting commit of transaction %d\n",
commit_transaction->t_tid);
write_lock(&journal->j_state_lock);
@@ -427,7 +427,7 @@
__jbd2_journal_clean_checkpoint_list(journal);
spin_unlock(&journal->j_list_lock);
- jbd_debug (3, "JBD: commit phase 1\n");
+ jbd_debug(3, "JBD2: commit phase 1\n");
/*
* Switch to a new revoke table.
@@ -447,7 +447,7 @@
wake_up(&journal->j_wait_transaction_locked);
write_unlock(&journal->j_state_lock);
- jbd_debug (3, "JBD: commit phase 2\n");
+ jbd_debug(3, "JBD2: commit phase 2\n");
/*
* Now start flushing things to disk, in the order they appear
@@ -462,7 +462,7 @@
WRITE_SYNC);
blk_finish_plug(&plug);
- jbd_debug(3, "JBD: commit phase 2\n");
+ jbd_debug(3, "JBD2: commit phase 2\n");
/*
* Way to go: we have now written out all of the data for a
@@ -522,7 +522,7 @@
J_ASSERT (bufs == 0);
- jbd_debug(4, "JBD: get descriptor\n");
+ jbd_debug(4, "JBD2: get descriptor\n");
descriptor = jbd2_journal_get_descriptor_buffer(journal);
if (!descriptor) {
@@ -531,7 +531,7 @@
}
bh = jh2bh(descriptor);
- jbd_debug(4, "JBD: got buffer %llu (%p)\n",
+ jbd_debug(4, "JBD2: got buffer %llu (%p)\n",
(unsigned long long)bh->b_blocknr, bh->b_data);
header = (journal_header_t *)&bh->b_data[0];
header->h_magic = cpu_to_be32(JBD2_MAGIC_NUMBER);
@@ -625,7 +625,7 @@
commit_transaction->t_buffers == NULL ||
space_left < tag_bytes + 16) {
- jbd_debug(4, "JBD: Submit %d IOs\n", bufs);
+ jbd_debug(4, "JBD2: Submit %d IOs\n", bufs);
/* Write an end-of-descriptor marker before
submitting the IOs. "tag" still points to
@@ -707,7 +707,7 @@
so we incur less scheduling load.
*/
- jbd_debug(3, "JBD: commit phase 3\n");
+ jbd_debug(3, "JBD2: commit phase 3\n");
/*
* akpm: these are BJ_IO, and j_list_lock is not needed.
@@ -771,7 +771,7 @@
J_ASSERT (commit_transaction->t_shadow_list == NULL);
- jbd_debug(3, "JBD: commit phase 4\n");
+ jbd_debug(3, "JBD2: commit phase 4\n");
/* Here we wait for the revoke record and descriptor record buffers */
wait_for_ctlbuf:
@@ -801,7 +801,7 @@
if (err)
jbd2_journal_abort(journal, err);
- jbd_debug(3, "JBD: commit phase 5\n");
+ jbd_debug(3, "JBD2: commit phase 5\n");
write_lock(&journal->j_state_lock);
J_ASSERT(commit_transaction->t_state == T_COMMIT_DFLUSH);
commit_transaction->t_state = T_COMMIT_JFLUSH;
@@ -830,7 +830,7 @@
transaction can be removed from any checkpoint list it was on
before. */
- jbd_debug(3, "JBD: commit phase 6\n");
+ jbd_debug(3, "JBD2: commit phase 6\n");
J_ASSERT(list_empty(&commit_transaction->t_inode_list));
J_ASSERT(commit_transaction->t_buffers == NULL);
@@ -964,7 +964,7 @@
/* Done with this transaction! */
- jbd_debug(3, "JBD: commit phase 7\n");
+ jbd_debug(3, "JBD2: commit phase 7\n");
J_ASSERT(commit_transaction->t_state == T_COMMIT_JFLUSH);
@@ -1039,7 +1039,7 @@
journal->j_commit_callback(journal, commit_transaction);
trace_jbd2_end_commit(journal, commit_transaction);
- jbd_debug(1, "JBD: commit %d complete, head %d\n",
+ jbd_debug(1, "JBD2: commit %d complete, head %d\n",
journal->j_commit_sequence, journal->j_tail_sequence);
if (to_free)
kfree(commit_transaction);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index f24df13..0fa01231 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -491,7 +491,7 @@
*/
journal->j_commit_request = target;
- jbd_debug(1, "JBD: requesting commit %d/%d\n",
+ jbd_debug(1, "JBD2: requesting commit %d/%d\n",
journal->j_commit_request,
journal->j_commit_sequence);
wake_up(&journal->j_wait_commit);
@@ -500,7 +500,7 @@
/* This should never happen, but if it does, preserve
the evidence before kjournald goes into a loop and
increments j_commit_sequence beyond all recognition. */
- WARN_ONCE(1, "jbd: bad log_start_commit: %u %u %u %u\n",
+ WARN_ONCE(1, "JBD2: bad log_start_commit: %u %u %u %u\n",
journal->j_commit_request,
journal->j_commit_sequence,
target, journal->j_running_transaction ?
@@ -645,7 +645,7 @@
}
#endif
while (tid_gt(tid, journal->j_commit_sequence)) {
- jbd_debug(1, "JBD: want %d, j_commit_sequence=%d\n",
+ jbd_debug(1, "JBD2: want %d, j_commit_sequence=%d\n",
tid, journal->j_commit_sequence);
wake_up(&journal->j_wait_commit);
read_unlock(&journal->j_state_lock);
@@ -1093,7 +1093,7 @@
first = be32_to_cpu(sb->s_first);
last = be32_to_cpu(sb->s_maxlen);
if (first + JBD2_MIN_JOURNAL_BLOCKS > last + 1) {
- printk(KERN_ERR "JBD: Journal too short (blocks %llu-%llu).\n",
+ printk(KERN_ERR "JBD2: Journal too short (blocks %llu-%llu).\n",
first, last);
journal_fail_superblock(journal);
return -EINVAL;
@@ -1139,7 +1139,7 @@
*/
if (sb->s_start == 0 && journal->j_tail_sequence ==
journal->j_transaction_sequence) {
- jbd_debug(1,"JBD: Skipping superblock update on recovered sb "
+ jbd_debug(1, "JBD2: Skipping superblock update on recovered sb "
"(start %ld, seq %d, errno %d)\n",
journal->j_tail, journal->j_tail_sequence,
journal->j_errno);
@@ -1163,7 +1163,7 @@
}
read_lock(&journal->j_state_lock);
- jbd_debug(1,"JBD: updating superblock (start %ld, seq %d, errno %d)\n",
+ jbd_debug(1, "JBD2: updating superblock (start %ld, seq %d, errno %d)\n",
journal->j_tail, journal->j_tail_sequence, journal->j_errno);
sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
@@ -1216,8 +1216,8 @@
ll_rw_block(READ, 1, &bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
- printk (KERN_ERR
- "JBD: IO error reading journal superblock\n");
+ printk(KERN_ERR
+ "JBD2: IO error reading journal superblock\n");
goto out;
}
}
@@ -1228,7 +1228,7 @@
if (sb->s_header.h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER) ||
sb->s_blocksize != cpu_to_be32(journal->j_blocksize)) {
- printk(KERN_WARNING "JBD: no valid journal superblock found\n");
+ printk(KERN_WARNING "JBD2: no valid journal superblock found\n");
goto out;
}
@@ -1240,14 +1240,22 @@
journal->j_format_version = 2;
break;
default:
- printk(KERN_WARNING "JBD: unrecognised superblock format ID\n");
+ printk(KERN_WARNING "JBD2: unrecognised superblock format ID\n");
goto out;
}
if (be32_to_cpu(sb->s_maxlen) < journal->j_maxlen)
journal->j_maxlen = be32_to_cpu(sb->s_maxlen);
else if (be32_to_cpu(sb->s_maxlen) > journal->j_maxlen) {
- printk (KERN_WARNING "JBD: journal file too short\n");
+ printk(KERN_WARNING "JBD2: journal file too short\n");
+ goto out;
+ }
+
+ if (be32_to_cpu(sb->s_first) == 0 ||
+ be32_to_cpu(sb->s_first) >= journal->j_maxlen) {
+ printk(KERN_WARNING
+ "JBD2: Invalid start block of journal: %u\n",
+ be32_to_cpu(sb->s_first));
goto out;
}
@@ -1310,8 +1318,8 @@
~cpu_to_be32(JBD2_KNOWN_ROCOMPAT_FEATURES)) ||
(sb->s_feature_incompat &
~cpu_to_be32(JBD2_KNOWN_INCOMPAT_FEATURES))) {
- printk (KERN_WARNING
- "JBD: Unrecognised features on journal\n");
+ printk(KERN_WARNING
+ "JBD2: Unrecognised features on journal\n");
return -EINVAL;
}
}
@@ -1346,7 +1354,7 @@
return 0;
recovery_error:
- printk (KERN_WARNING "JBD: recovery failed\n");
+ printk(KERN_WARNING "JBD2: recovery failed\n");
return -EIO;
}
@@ -1577,7 +1585,7 @@
struct buffer_head *bh;
printk(KERN_WARNING
- "JBD: Converting superblock from version 1 to 2.\n");
+ "JBD2: Converting superblock from version 1 to 2.\n");
/* Pre-initialise new fields to zero */
offset = ((char *) &(sb->s_feature_compat)) - ((char *) sb);
@@ -1694,7 +1702,7 @@
if (!journal->j_tail)
goto no_recovery;
- printk (KERN_WARNING "JBD: %s recovery information on journal\n",
+ printk(KERN_WARNING "JBD2: %s recovery information on journal\n",
write ? "Clearing" : "Ignoring");
err = jbd2_journal_skip_recovery(journal);
@@ -2020,7 +2028,7 @@
retval = 0;
if (!jbd2_journal_head_cache) {
retval = -ENOMEM;
- printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
+ printk(KERN_EMERG "JBD2: no memory for journal_head cache\n");
}
return retval;
}
@@ -2383,7 +2391,7 @@
#ifdef CONFIG_JBD2_DEBUG
int n = atomic_read(&nr_journal_heads);
if (n)
- printk(KERN_EMERG "JBD: leaked %d journal_heads!\n", n);
+ printk(KERN_EMERG "JBD2: leaked %d journal_heads!\n", n);
#endif
jbd2_remove_debugfs_entry();
jbd2_remove_jbd_stats_proc_entry();
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 1cad869..da6d7ba 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -89,7 +89,7 @@
err = jbd2_journal_bmap(journal, next, &blocknr);
if (err) {
- printk (KERN_ERR "JBD: bad block at offset %u\n",
+ printk(KERN_ERR "JBD2: bad block at offset %u\n",
next);
goto failed;
}
@@ -138,14 +138,14 @@
*bhp = NULL;
if (offset >= journal->j_maxlen) {
- printk(KERN_ERR "JBD: corrupted journal superblock\n");
+ printk(KERN_ERR "JBD2: corrupted journal superblock\n");
return -EIO;
}
err = jbd2_journal_bmap(journal, offset, &blocknr);
if (err) {
- printk (KERN_ERR "JBD: bad block at offset %u\n",
+ printk(KERN_ERR "JBD2: bad block at offset %u\n",
offset);
return err;
}
@@ -163,7 +163,7 @@
}
if (!buffer_uptodate(bh)) {
- printk (KERN_ERR "JBD: Failed to read block at offset %u\n",
+ printk(KERN_ERR "JBD2: Failed to read block at offset %u\n",
offset);
brelse(bh);
return -EIO;
@@ -251,10 +251,10 @@
if (!err)
err = do_one_pass(journal, &info, PASS_REPLAY);
- jbd_debug(1, "JBD: recovery, exit status %d, "
+ jbd_debug(1, "JBD2: recovery, exit status %d, "
"recovered transactions %u to %u\n",
err, info.start_transaction, info.end_transaction);
- jbd_debug(1, "JBD: Replayed %d and revoked %d/%d blocks\n",
+ jbd_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
/* Restart the log at the next transaction ID, thus invalidating
@@ -293,14 +293,14 @@
err = do_one_pass(journal, &info, PASS_SCAN);
if (err) {
- printk(KERN_ERR "JBD: error %d scanning journal\n", err);
+ printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
++journal->j_transaction_sequence;
} else {
#ifdef CONFIG_JBD2_DEBUG
int dropped = info.end_transaction -
be32_to_cpu(journal->j_superblock->s_sequence);
jbd_debug(1,
- "JBD: ignoring %d transaction%s from the journal.\n",
+ "JBD2: ignoring %d transaction%s from the journal.\n",
dropped, (dropped == 1) ? "" : "s");
#endif
journal->j_transaction_sequence = ++info.end_transaction;
@@ -338,7 +338,7 @@
wrap(journal, *next_log_block);
err = jread(&obh, journal, io_block);
if (err) {
- printk(KERN_ERR "JBD: IO error %d recovering block "
+ printk(KERN_ERR "JBD2: IO error %d recovering block "
"%lu in log\n", err, io_block);
return 1;
} else {
@@ -411,7 +411,7 @@
* either the next descriptor block or the final commit
* record. */
- jbd_debug(3, "JBD: checking block %ld\n", next_log_block);
+ jbd_debug(3, "JBD2: checking block %ld\n", next_log_block);
err = jread(&bh, journal, next_log_block);
if (err)
goto failed;
@@ -491,8 +491,8 @@
/* Recover what we can, but
* report failure at the end. */
success = err;
- printk (KERN_ERR
- "JBD: IO error %d recovering "
+ printk(KERN_ERR
+ "JBD2: IO error %d recovering "
"block %ld in log\n",
err, io_block);
} else {
@@ -520,7 +520,7 @@
journal->j_blocksize);
if (nbh == NULL) {
printk(KERN_ERR
- "JBD: Out of memory "
+ "JBD2: Out of memory "
"during recovery.\n");
err = -ENOMEM;
brelse(bh);
@@ -689,7 +689,7 @@
/* It's really bad news if different passes end up at
* different places (but possible due to IO errors). */
if (info->end_transaction != next_commit_ID) {
- printk (KERN_ERR "JBD: recovery pass %d ended at "
+ printk(KERN_ERR "JBD2: recovery pass %d ended at "
"transaction %u, expected %u\n",
pass, next_commit_ID, info->end_transaction);
if (!success)
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 2d71094..a0e41a4 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -27,6 +27,7 @@
#include <linux/highmem.h>
#include <linux/hrtimer.h>
#include <linux/backing-dev.h>
+#include <linux/bug.h>
#include <linux/module.h>
static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh);
@@ -115,7 +116,7 @@
*/
static int start_this_handle(journal_t *journal, handle_t *handle,
- int gfp_mask)
+ gfp_t gfp_mask)
{
transaction_t *transaction, *new_transaction = NULL;
tid_t tid;
@@ -124,7 +125,7 @@
unsigned long ts = jiffies;
if (nblocks > journal->j_max_transaction_buffers) {
- printk(KERN_ERR "JBD: %s wants too many credits (%d > %d)\n",
+ printk(KERN_ERR "JBD2: %s wants too many credits (%d > %d)\n",
current->comm, nblocks,
journal->j_max_transaction_buffers);
return -ENOSPC;
@@ -320,7 +321,7 @@
* Return a pointer to a newly allocated handle, or an ERR_PTR() value
* on failure.
*/
-handle_t *jbd2__journal_start(journal_t *journal, int nblocks, int gfp_mask)
+handle_t *jbd2__journal_start(journal_t *journal, int nblocks, gfp_t gfp_mask)
{
handle_t *handle = journal_current_handle();
int err;
@@ -443,7 +444,7 @@
* transaction capabable of guaranteeing the requested number of
* credits.
*/
-int jbd2__journal_restart(handle_t *handle, int nblocks, int gfp_mask)
+int jbd2__journal_restart(handle_t *handle, int nblocks, gfp_t gfp_mask)
{
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
@@ -563,7 +564,7 @@
char b[BDEVNAME_SIZE];
printk(KERN_WARNING
- "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+ "JBD2: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
"There's a risk of filesystem corruption in case of system "
"crash.\n",
bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
@@ -1049,6 +1050,10 @@
* mark dirty metadata which needs to be journaled as part of the current
* transaction.
*
+ * The buffer must have previously had jbd2_journal_get_write_access()
+ * called so that it has a valid journal_head attached to the buffer
+ * head.
+ *
* The buffer is placed on the transaction's metadata list and is marked
* as belonging to the transaction.
*
@@ -1065,11 +1070,16 @@
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
struct journal_head *jh = bh2jh(bh);
+ int ret = 0;
jbd_debug(5, "journal_head %p\n", jh);
JBUFFER_TRACE(jh, "entry");
if (is_handle_aborted(handle))
goto out;
+ if (!buffer_jbd(bh)) {
+ ret = -EUCLEAN;
+ goto out;
+ }
jbd_lock_bh_state(bh);
@@ -1093,8 +1103,20 @@
*/
if (jh->b_transaction == transaction && jh->b_jlist == BJ_Metadata) {
JBUFFER_TRACE(jh, "fastpath");
- J_ASSERT_JH(jh, jh->b_transaction ==
- journal->j_running_transaction);
+ if (unlikely(jh->b_transaction !=
+ journal->j_running_transaction)) {
+ printk(KERN_EMERG "JBD: %s: "
+ "jh->b_transaction (%llu, %p, %u) != "
+ "journal->j_running_transaction (%p, %u)",
+ journal->j_devname,
+ (unsigned long long) bh->b_blocknr,
+ jh->b_transaction,
+ jh->b_transaction ? jh->b_transaction->t_tid : 0,
+ journal->j_running_transaction,
+ journal->j_running_transaction ?
+ journal->j_running_transaction->t_tid : 0);
+ ret = -EINVAL;
+ }
goto out_unlock_bh;
}
@@ -1108,9 +1130,32 @@
*/
if (jh->b_transaction != transaction) {
JBUFFER_TRACE(jh, "already on other transaction");
- J_ASSERT_JH(jh, jh->b_transaction ==
- journal->j_committing_transaction);
- J_ASSERT_JH(jh, jh->b_next_transaction == transaction);
+ if (unlikely(jh->b_transaction !=
+ journal->j_committing_transaction)) {
+ printk(KERN_EMERG "JBD: %s: "
+ "jh->b_transaction (%llu, %p, %u) != "
+ "journal->j_committing_transaction (%p, %u)",
+ journal->j_devname,
+ (unsigned long long) bh->b_blocknr,
+ jh->b_transaction,
+ jh->b_transaction ? jh->b_transaction->t_tid : 0,
+ journal->j_committing_transaction,
+ journal->j_committing_transaction ?
+ journal->j_committing_transaction->t_tid : 0);
+ ret = -EINVAL;
+ }
+ if (unlikely(jh->b_next_transaction != transaction)) {
+ printk(KERN_EMERG "JBD: %s: "
+ "jh->b_next_transaction (%llu, %p, %u) != "
+ "transaction (%p, %u)",
+ journal->j_devname,
+ (unsigned long long) bh->b_blocknr,
+ jh->b_next_transaction,
+ jh->b_next_transaction ?
+ jh->b_next_transaction->t_tid : 0,
+ transaction, transaction->t_tid);
+ ret = -EINVAL;
+ }
/* And this case is illegal: we can't reuse another
* transaction's data buffer, ever. */
goto out_unlock_bh;
@@ -1127,7 +1172,8 @@
jbd_unlock_bh_state(bh);
out:
JBUFFER_TRACE(jh, "exit");
- return 0;
+ WARN_ON(ret); /* All errors are bugs, so dump the stack */
+ return ret;
}
/*
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 9659b7c..be6169b 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -245,7 +245,7 @@
ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
dentry->d_name.len, dead_f, now);
if (dead_f->inocache)
- dentry->d_inode->i_nlink = dead_f->inocache->pino_nlink;
+ set_nlink(dentry->d_inode, dead_f->inocache->pino_nlink);
if (!ret)
dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
return ret;
@@ -278,7 +278,7 @@
if (!ret) {
mutex_lock(&f->sem);
- old_dentry->d_inode->i_nlink = ++f->inocache->pino_nlink;
+ set_nlink(old_dentry->d_inode, ++f->inocache->pino_nlink);
mutex_unlock(&f->sem);
d_instantiate(dentry, old_dentry->d_inode);
dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
@@ -497,7 +497,7 @@
f = JFFS2_INODE_INFO(inode);
/* Directories get nlink 2 at start */
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
/* but ic->pino_nlink is the parent ino# */
f->inocache->pino_nlink = dir_i->i_ino;
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index bbcb975..7286e44 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -278,7 +278,7 @@
inode->i_mtime = ITIME(je32_to_cpu(latest_node.mtime));
inode->i_ctime = ITIME(je32_to_cpu(latest_node.ctime));
- inode->i_nlink = f->inocache->pino_nlink;
+ set_nlink(inode, f->inocache->pino_nlink);
inode->i_blocks = (inode->i_size + 511) >> 9;
@@ -291,7 +291,7 @@
case S_IFDIR:
{
struct jffs2_full_dirent *fd;
- inode->i_nlink = 2; /* parent and '.' */
+ set_nlink(inode, 2); /* parent and '.' */
for (fd=f->dents; fd; fd = fd->next) {
if (fd->type == DT_DIR && fd->ino)
@@ -453,7 +453,7 @@
iput(inode);
return ERR_PTR(ret);
}
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_ino = je32_to_cpu(ri->ino);
inode->i_mode = jemode_to_cpu(ri->mode);
inode->i_gid = je16_to_cpu(ri->gid);
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index b78b2f9..1b6f15f 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -457,7 +457,7 @@
/* read the page of fixed disk inode (AIT) in raw mode */
mp = read_metapage(ip, address << sbi->l2nbperpage, PSIZE, 1);
if (mp == NULL) {
- ip->i_nlink = 1; /* Don't want iput() deleting it */
+ set_nlink(ip, 1); /* Don't want iput() deleting it */
iput(ip);
return (NULL);
}
@@ -469,7 +469,7 @@
/* copy on-disk inode to in-memory inode */
if ((copy_from_dinode(dp, ip)) != 0) {
/* handle bad return by returning NULL for ip */
- ip->i_nlink = 1; /* Don't want iput() deleting it */
+ set_nlink(ip, 1); /* Don't want iput() deleting it */
iput(ip);
/* release the page */
release_metapage(mp);
@@ -3076,7 +3076,7 @@
ip->i_mode |= 0001;
}
}
- ip->i_nlink = le32_to_cpu(dip->di_nlink);
+ set_nlink(ip, le32_to_cpu(dip->di_nlink));
jfs_ip->saved_uid = le32_to_cpu(dip->di_uid);
if (sbi->uid == -1)
diff --git a/fs/jfs/jfs_inode.c b/fs/jfs/jfs_inode.c
index 2686531..c1a3e60 100644
--- a/fs/jfs/jfs_inode.c
+++ b/fs/jfs/jfs_inode.c
@@ -157,7 +157,7 @@
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
fail_unlock:
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
fail_put:
iput(inode);
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index e17545e1..a112ad9 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -172,7 +172,7 @@
mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
@@ -292,7 +292,7 @@
goto out3;
}
- ip->i_nlink = 2; /* for '.' */
+ set_nlink(ip, 2); /* for '.' */
ip->i_op = &jfs_dir_inode_operations;
ip->i_fop = &jfs_dir_operations;
@@ -311,7 +311,7 @@
mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
@@ -844,7 +844,7 @@
rc = txCommit(tid, 2, &iplist[0], 0);
if (rc) {
- ip->i_nlink--; /* never instantiated */
+ drop_nlink(ip); /* never instantiated */
iput(ip);
} else
d_instantiate(dentry, ip);
@@ -1048,7 +1048,7 @@
mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
@@ -1433,7 +1433,7 @@
mutex_unlock(&JFS_IP(dir)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 06c8a67..a44eff076 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -485,7 +485,6 @@
goto out_unload;
}
inode->i_ino = 0;
- inode->i_nlink = 1;
inode->i_size = sb->s_bdev->bd_inode->i_size;
inode->i_mapping->a_ops = &jfs_metapage_aops;
insert_inode_hash(inode);
diff --git a/fs/libfs.c b/fs/libfs.c
index c18e9a1..f6d411e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -490,7 +490,7 @@
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
root = d_alloc_root(inode);
if (!root) {
iput(inode);
@@ -510,8 +510,10 @@
if (!dentry)
goto out;
inode = new_inode(s);
- if (!inode)
+ if (!inode) {
+ dput(dentry);
goto out;
+ }
inode->i_mode = S_IFREG | files->mode;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_fop = files->ops;
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index b3ff3d8..b7d7f67 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -197,7 +197,7 @@
{
int ret;
- inode->i_nlink--;
+ drop_nlink(inode);
ret = write_inode(inode);
LOGFS_BUG_ON(ret, inode->i_sb);
return ret;
@@ -433,7 +433,7 @@
ta = kzalloc(sizeof(*ta), GFP_KERNEL);
if (!ta) {
- inode->i_nlink--;
+ drop_nlink(inode);
iput(inode);
return -ENOMEM;
}
@@ -456,7 +456,7 @@
abort_transaction(inode, ta);
li->li_flags |= LOGFS_IF_STILLBORN;
/* FIXME: truncate symlink */
- inode->i_nlink--;
+ drop_nlink(inode);
iput(inode);
goto out;
}
@@ -563,7 +563,7 @@
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME;
ihold(inode);
- inode->i_nlink++;
+ inc_nlink(inode);
mark_inode_dirty_sync(inode);
return __logfs_create(dir, dentry, inode, NULL, 0);
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index edfea7a..7e441ad 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -93,7 +93,7 @@
/* inode->i_nlink == 0 can be true when called from
* block validator */
/* set i_nlink to 0 to prevent caching */
- inode->i_nlink = 0;
+ clear_nlink(inode);
logfs_inode(inode)->li_flags |= LOGFS_IF_ZOMBIE;
iget_failed(inode);
if (!err)
@@ -199,7 +199,6 @@
inode->i_blocks = 0;
inode->i_ctime = CURRENT_TIME;
inode->i_mtime = CURRENT_TIME;
- inode->i_nlink = 1;
li->li_refcount = 1;
INIT_LIST_HEAD(&li->li_freeing_list);
diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h
index f22d108..398ecff6 100644
--- a/fs/logfs/logfs.h
+++ b/fs/logfs/logfs.h
@@ -618,7 +618,6 @@
struct page *emergency_read_begin(struct address_space *mapping, pgoff_t index);
void emergency_read_end(struct page *page);
void logfs_crash_dump(struct super_block *sb);
-void *memchr_inv(const void *s, int c, size_t n);
int logfs_statfs(struct dentry *dentry, struct kstatfs *stats);
int logfs_check_ds(struct logfs_disk_super *ds);
int logfs_write_sb(struct super_block *sb);
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index d8d0938..2ac4217 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -126,7 +126,7 @@
inode->i_atime = be64_to_timespec(di->di_atime);
inode->i_ctime = be64_to_timespec(di->di_ctime);
inode->i_mtime = be64_to_timespec(di->di_mtime);
- inode->i_nlink = be32_to_cpu(di->di_refcount);
+ set_nlink(inode, be32_to_cpu(di->di_refcount));
inode->i_generation = be32_to_cpu(di->di_generation);
switch (inode->i_mode & S_IFMT) {
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index ce03a18..f2697e4 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -91,28 +91,6 @@
}
/*
- * TODO: move to lib/string.c
- */
-/**
- * memchr_inv - Find a character in an area of memory.
- * @s: The memory area
- * @c: The byte to search for
- * @n: The size of the area.
- *
- * returns the address of the first character other than @c, or %NULL
- * if the whole buffer contains just @c.
- */
-void *memchr_inv(const void *s, int c, size_t n)
-{
- const unsigned char *p = s;
- while (n-- != 0)
- if ((unsigned char)c != *p++)
- return (void *)(p - 1);
-
- return NULL;
-}
-
-/*
* FIXME: There should be a reserve for root, similar to ext2.
*/
int logfs_statfs(struct dentry *dentry, struct kstatfs *stats)
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index e7d23e25..64cdcd6 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -446,7 +446,7 @@
inode->i_mode = raw_inode->i_mode;
inode->i_uid = (uid_t)raw_inode->i_uid;
inode->i_gid = (gid_t)raw_inode->i_gid;
- inode->i_nlink = raw_inode->i_nlinks;
+ set_nlink(inode, raw_inode->i_nlinks);
inode->i_size = raw_inode->i_size;
inode->i_mtime.tv_sec = inode->i_atime.tv_sec = inode->i_ctime.tv_sec = raw_inode->i_time;
inode->i_mtime.tv_nsec = 0;
@@ -479,7 +479,7 @@
inode->i_mode = raw_inode->i_mode;
inode->i_uid = (uid_t)raw_inode->i_uid;
inode->i_gid = (gid_t)raw_inode->i_gid;
- inode->i_nlink = raw_inode->i_nlinks;
+ set_nlink(inode, raw_inode->i_nlinks);
inode->i_size = raw_inode->i_size;
inode->i_mtime.tv_sec = raw_inode->i_mtime;
inode->i_atime.tv_sec = raw_inode->i_atime;
diff --git a/fs/namei.c b/fs/namei.c
index 0b3138d..ac6d214 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -137,7 +137,7 @@
return retval;
}
-static char *getname_flags(const char __user * filename, int flags)
+static char *getname_flags(const char __user *filename, int flags, int *empty)
{
char *tmp, *result;
@@ -148,6 +148,8 @@
result = tmp;
if (retval < 0) {
+ if (retval == -ENOENT && empty)
+ *empty = 1;
if (retval != -ENOENT || !(flags & LOOKUP_EMPTY)) {
__putname(tmp);
result = ERR_PTR(retval);
@@ -160,7 +162,7 @@
char *getname(const char __user * filename)
{
- return getname_flags(filename, 0);
+ return getname_flags(filename, 0, 0);
}
#ifdef CONFIG_AUDITSYSCALL
@@ -221,14 +223,12 @@
}
/*
- * This does basic POSIX ACL permission checking
+ * This does the basic permission checking
*/
static int acl_permission_check(struct inode *inode, int mask)
{
unsigned int mode = inode->i_mode;
- mask &= MAY_READ | MAY_WRITE | MAY_EXEC | MAY_NOT_BLOCK;
-
if (current_user_ns() != inode_userns(inode))
goto other_perms;
@@ -257,7 +257,7 @@
/**
* generic_permission - check for access rights on a Posix-like filesystem
* @inode: inode to check access rights for
- * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
+ * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC, ...)
*
* Used to check for read/write/execute permissions on a file.
* We use "fsuid" for this, letting us set arbitrary permissions
@@ -273,7 +273,7 @@
int ret;
/*
- * Do the basic POSIX ACL permission checks.
+ * Do the basic permission checks.
*/
ret = acl_permission_check(inode, mask);
if (ret != -EACCES)
@@ -331,12 +331,14 @@
/**
* inode_permission - check for access rights to a given inode
* @inode: inode to check permission on
- * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
+ * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC, ...)
*
* Used to check for read/write/execute permissions on an inode.
* We use "fsuid" for this, letting us set arbitrary permissions
* for filesystem access without changing the "normal" uids which
* are used for other things.
+ *
+ * When checking for MAY_APPEND, MAY_WRITE must also be set in @mask.
*/
int inode_permission(struct inode *inode, int mask)
{
@@ -1798,11 +1800,11 @@
return __lookup_hash(&this, base, NULL);
}
-int user_path_at(int dfd, const char __user *name, unsigned flags,
- struct path *path)
+int user_path_at_empty(int dfd, const char __user *name, unsigned flags,
+ struct path *path, int *empty)
{
struct nameidata nd;
- char *tmp = getname_flags(name, flags);
+ char *tmp = getname_flags(name, flags, empty);
int err = PTR_ERR(tmp);
if (!IS_ERR(tmp)) {
@@ -1816,6 +1818,12 @@
return err;
}
+int user_path_at(int dfd, const char __user *name, unsigned flags,
+ struct path *path)
+{
+ return user_path_at_empty(dfd, name, flags, path, 0);
+}
+
static int user_path_parent(int dfd, const char __user *path,
struct nameidata *nd, char **name)
{
@@ -2035,10 +2043,7 @@
if (flag & O_NOATIME && !inode_owner_or_capable(inode))
return -EPERM;
- /*
- * Ensure there are no outstanding leases on the file.
- */
- return break_lease(inode, flag);
+ return 0;
}
static int handle_truncate(struct file *filp)
diff --git a/fs/namespace.c b/fs/namespace.c
index b4febb2..e5e1c7d 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1109,6 +1109,7 @@
/* device */
if (mnt->mnt_sb->s_op->show_devname) {
+ seq_puts(m, "device ");
err = mnt->mnt_sb->s_op->show_devname(m, mnt);
} else {
if (mnt->mnt_devname) {
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 202f370..5b5fa33 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -228,7 +228,7 @@
DDPRINTK("ncp_read_inode: inode->i_mode = %u\n", inode->i_mode);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_uid = server->m.uid;
inode->i_gid = server->m.gid;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 28b8c3f..91c01f0 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -180,8 +180,6 @@
static loff_t nfs_file_llseek(struct file *filp, loff_t offset, int origin)
{
- loff_t loff;
-
dprintk("NFS: llseek file(%s/%s, %lld, %d)\n",
filp->f_path.dentry->d_parent->d_name.name,
filp->f_path.dentry->d_name.name,
@@ -197,13 +195,9 @@
int retval = nfs_revalidate_file_size(inode, filp);
if (retval < 0)
return (loff_t)retval;
+ }
- spin_lock(&inode->i_lock);
- loff = generic_file_llseek_unlocked(filp, offset, origin);
- spin_unlock(&inode->i_lock);
- } else
- loff = generic_file_llseek_unlocked(filp, offset, origin);
- return loff;
+ return generic_file_llseek(filp, offset, origin);
}
/*
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 4dc6d07..c07a55a 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -320,7 +320,7 @@
memset(&inode->i_ctime, 0, sizeof(inode->i_ctime));
inode->i_version = 0;
inode->i_size = 0;
- inode->i_nlink = 0;
+ clear_nlink(inode);
inode->i_uid = -2;
inode->i_gid = -2;
inode->i_blocks = 0;
@@ -355,7 +355,7 @@
| NFS_INO_INVALID_DATA
| NFS_INO_REVAL_PAGECACHE;
if (fattr->valid & NFS_ATTR_FATTR_NLINK)
- inode->i_nlink = fattr->nlink;
+ set_nlink(inode, fattr->nlink);
else if (nfs_server_capable(inode, NFS_CAP_NLINK))
nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (fattr->valid & NFS_ATTR_FATTR_OWNER)
@@ -1361,7 +1361,7 @@
invalid |= NFS_INO_INVALID_ATTR;
if (S_ISDIR(inode->i_mode))
invalid |= NFS_INO_INVALID_DATA;
- inode->i_nlink = fattr->nlink;
+ set_nlink(inode, fattr->nlink);
}
} else if (server->caps & NFS_CAP_NLINK)
invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 66d095d..b6fa792 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -655,7 +655,7 @@
default:
return nfserr_bad_xdr;
}
- w &= !NFS4_SHARE_ACCESS_MASK;
+ w &= ~NFS4_SHARE_ACCESS_MASK;
if (!w)
return nfs_ok;
if (!argp->minorversion)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 666628b..b50ffb7 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -354,7 +354,7 @@
failed_acl:
failed_bmap:
- inode->i_nlink = 0;
+ clear_nlink(inode);
iput(inode); /* raw_inode will be deleted through
generic_delete_inode() */
goto failed;
@@ -396,7 +396,7 @@
inode->i_mode = le16_to_cpu(raw_inode->i_mode);
inode->i_uid = (uid_t)le32_to_cpu(raw_inode->i_uid);
inode->i_gid = (gid_t)le32_to_cpu(raw_inode->i_gid);
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
inode->i_size = le64_to_cpu(raw_inode->i_size);
inode->i_atime.tv_sec = le64_to_cpu(raw_inode->i_mtime);
inode->i_ctime.tv_sec = le64_to_cpu(raw_inode->i_ctime);
diff --git a/fs/nilfs2/namei.c b/fs/nilfs2/namei.c
index a314199..768982d 100644
--- a/fs/nilfs2/namei.c
+++ b/fs/nilfs2/namei.c
@@ -289,7 +289,7 @@
nilfs_warning(inode->i_sb, __func__,
"deleting nonexistent file (%lu), %d\n",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
err = nilfs_delete_entry(de, page);
if (err)
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 255d5e1..3777d13 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -276,10 +276,10 @@
/* super.c */
extern struct inode *nilfs_alloc_inode(struct super_block *);
extern void nilfs_destroy_inode(struct inode *);
-extern void nilfs_error(struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern void nilfs_warning(struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void nilfs_error(struct super_block *, const char *, const char *, ...);
+extern __printf(3, 4)
+void nilfs_warning(struct super_block *, const char *, const char *, ...);
extern struct nilfs_super_block *
nilfs_read_super_block(struct super_block *, u64, int, struct buffer_head **);
extern int nilfs_store_magic_and_option(struct super_block *,
diff --git a/fs/ntfs/debug.h b/fs/ntfs/debug.h
index 2142b1c..53c27ea 100644
--- a/fs/ntfs/debug.h
+++ b/fs/ntfs/debug.h
@@ -30,8 +30,9 @@
extern int debug_msgs;
-extern void __ntfs_debug(const char *file, int line, const char *function,
- const char *format, ...) __attribute__ ((format (printf, 4, 5)));
+extern __printf(4, 5)
+void __ntfs_debug(const char *file, int line, const char *function,
+ const char *format, ...);
/**
* ntfs_debug - write a debug level message to syslog
* @f: a printf format string containing the message
@@ -52,12 +53,14 @@
#endif /* !DEBUG */
-extern void __ntfs_warning(const char *function, const struct super_block *sb,
- const char *fmt, ...) __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void __ntfs_warning(const char *function, const struct super_block *sb,
+ const char *fmt, ...);
#define ntfs_warning(sb, f, a...) __ntfs_warning(__func__, sb, f, ##a)
-extern void __ntfs_error(const char *function, const struct super_block *sb,
- const char *fmt, ...) __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void __ntfs_error(const char *function, const struct super_block *sb,
+ const char *fmt, ...);
#define ntfs_error(sb, f, a...) __ntfs_error(__func__, sb, f, ##a)
#endif /* _LINUX_NTFS_DEBUG_H */
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 1371487..97e2dac 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -612,7 +612,7 @@
* might be tricky due to vfs interactions. Need to think about this
* some more when implementing the unlink command.
*/
- vi->i_nlink = le16_to_cpu(m->link_count);
+ set_nlink(vi, le16_to_cpu(m->link_count));
/*
* FIXME: Reparse points can have the directory bit set even though
* they would be S_IFLNK. Need to deal with this further below when we
@@ -634,7 +634,7 @@
vi->i_mode &= ~vol->dmask;
/* Things break without this kludge! */
if (vi->i_nlink > 1)
- vi->i_nlink = 1;
+ set_nlink(vi, 1);
} else {
vi->i_mode |= S_IFREG;
/* Apply the file permissions mask set in the mount options. */
@@ -1242,7 +1242,7 @@
vi->i_version = base_vi->i_version;
vi->i_uid = base_vi->i_uid;
vi->i_gid = base_vi->i_gid;
- vi->i_nlink = base_vi->i_nlink;
+ set_nlink(vi, base_vi->i_nlink);
vi->i_mtime = base_vi->i_mtime;
vi->i_ctime = base_vi->i_ctime;
vi->i_atime = base_vi->i_atime;
@@ -1508,7 +1508,7 @@
vi->i_version = base_vi->i_version;
vi->i_uid = base_vi->i_uid;
vi->i_gid = base_vi->i_gid;
- vi->i_nlink = base_vi->i_nlink;
+ set_nlink(vi, base_vi->i_nlink);
vi->i_mtime = base_vi->i_mtime;
vi->i_ctime = base_vi->i_ctime;
vi->i_atime = base_vi->i_atime;
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 8582e3f..e2878b5 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2292,7 +2292,7 @@
ocfs2_journal_dirty(handle, di_bh);
i_size_write(inode, size);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_blocks = ocfs2_inode_sector_count(inode);
ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
@@ -2354,7 +2354,7 @@
ocfs2_journal_dirty(handle, new_bh);
i_size_write(inode, inode->i_sb->s_blocksize);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_blocks = ocfs2_inode_sector_count(inode);
status = ocfs2_mark_inode_dirty(handle, inode, fe_bh);
if (status < 0) {
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 7642d7c..e1ed5e5 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2092,7 +2092,7 @@
inode->i_uid = be32_to_cpu(lvb->lvb_iuid);
inode->i_gid = be32_to_cpu(lvb->lvb_igid);
inode->i_mode = be16_to_cpu(lvb->lvb_imode);
- inode->i_nlink = be16_to_cpu(lvb->lvb_inlink);
+ set_nlink(inode, be16_to_cpu(lvb->lvb_inlink));
ocfs2_unpack_timespec(&inode->i_atime,
be64_to_cpu(lvb->lvb_iatime_packed));
ocfs2_unpack_timespec(&inode->i_mtime,
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index b4c8bb6..a22d2c0 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -291,7 +291,7 @@
(unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)le64_to_cpu(fe->i_blkno));
- inode->i_nlink = ocfs2_read_links_count(fe);
+ set_nlink(inode, ocfs2_read_links_count(fe));
trace_ocfs2_populate_inode(OCFS2_I(inode)->ip_blkno,
le32_to_cpu(fe->i_flags));
@@ -1290,7 +1290,7 @@
OCFS2_I(inode)->ip_dyn_features = le16_to_cpu(fe->i_dyn_features);
ocfs2_set_inode_flags(inode);
i_size_write(inode, le64_to_cpu(fe->i_size));
- inode->i_nlink = ocfs2_read_links_count(fe);
+ set_nlink(inode, ocfs2_read_links_count(fe));
inode->i_uid = le32_to_cpu(fe->i_uid);
inode->i_gid = le32_to_cpu(fe->i_gid);
inode->i_mode = le16_to_cpu(fe->i_mode);
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 53aa41e..a8b2bfe 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -199,9 +199,7 @@
* these are used by the support functions here and in
* callers. */
if (S_ISDIR(mode))
- inode->i_nlink = 2;
- else
- inode->i_nlink = 1;
+ set_nlink(inode, 2);
inode_init_owner(inode, dir, mode);
dquot_initialize(inode);
return inode;
@@ -1379,7 +1377,7 @@
}
if (new_inode) {
- new_inode->i_nlink--;
+ drop_nlink(new_inode);
new_inode->i_ctime = CURRENT_TIME;
}
old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME;
@@ -1387,9 +1385,9 @@
if (update_dot_dot) {
status = ocfs2_update_entry(old_inode, handle,
&old_inode_dot_dot_res, new_dir);
- old_dir->i_nlink--;
+ drop_nlink(old_dir);
if (new_inode) {
- new_inode->i_nlink--;
+ drop_nlink(new_inode);
} else {
inc_nlink(new_dir);
mark_inode_dirty(new_dir);
@@ -2018,7 +2016,7 @@
orphan_fe = (struct ocfs2_dinode *) orphan_dir_bh->b_data;
if (S_ISDIR(inode->i_mode))
ocfs2_add_links_count(orphan_fe, 1);
- orphan_dir_inode->i_nlink = ocfs2_read_links_count(orphan_fe);
+ set_nlink(orphan_dir_inode, ocfs2_read_links_count(orphan_fe));
ocfs2_journal_dirty(handle, orphan_dir_bh);
status = __ocfs2_add_entry(handle, orphan_dir_inode, name,
@@ -2116,7 +2114,7 @@
orphan_fe = (struct ocfs2_dinode *) orphan_dir_bh->b_data;
if (S_ISDIR(inode->i_mode))
ocfs2_add_links_count(orphan_fe, -1);
- orphan_dir_inode->i_nlink = ocfs2_read_links_count(orphan_fe);
+ set_nlink(orphan_dir_inode, ocfs2_read_links_count(orphan_fe));
ocfs2_journal_dirty(handle, orphan_dir_bh);
leave:
@@ -2282,7 +2280,7 @@
goto leave;
}
- inode->i_nlink = 0;
+ clear_nlink(inode);
/* do the real work now. */
status = __ocfs2_mknod_locked(dir, inode,
0, &new_di_bh, parent_di_bh, handle,
@@ -2437,7 +2435,7 @@
di = (struct ocfs2_dinode *)di_bh->b_data;
le32_add_cpu(&di->i_flags, -OCFS2_ORPHANED_FL);
di->i_orphaned_slot = 0;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
ocfs2_set_links_count(di, inode->i_nlink);
ocfs2_journal_dirty(handle, di_bh);
diff --git a/fs/ocfs2/super.h b/fs/ocfs2/super.h
index 40c7de0..74ff74c 100644
--- a/fs/ocfs2/super.h
+++ b/fs/ocfs2/super.h
@@ -31,17 +31,15 @@
int ocfs2_publish_get_mount_state(struct ocfs2_super *osb,
int node_num);
-void __ocfs2_error(struct super_block *sb,
- const char *function,
- const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
+__printf(3, 4)
+void __ocfs2_error(struct super_block *sb, const char *function,
+ const char *fmt, ...);
#define ocfs2_error(sb, fmt, args...) __ocfs2_error(sb, __PRETTY_FUNCTION__, fmt, ##args)
-void __ocfs2_abort(struct super_block *sb,
- const char *function,
- const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
+__printf(3, 4)
+void __ocfs2_abort(struct super_block *sb, const char *function,
+ const char *fmt, ...);
#define ocfs2_abort(sb, fmt, args...) __ocfs2_abort(sb, __PRETTY_FUNCTION__, fmt, ##args)
diff --git a/fs/open.c b/fs/open.c
index f711921..22c41b5 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -685,6 +685,10 @@
if (error)
goto cleanup_all;
+ error = break_lease(inode, f->f_flags);
+ if (error)
+ goto cleanup_all;
+
if (!open && f->f_op)
open = f->f_op->open;
if (open) {
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index a2a5bff..e4e0ff7 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -242,7 +242,7 @@
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
inode->i_op = &openprom_inode_operations;
inode->i_fop = &openprom_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
break;
case op_inode_prop:
if (!strcmp(dp->name, "options") && (len == 17) &&
@@ -251,7 +251,7 @@
else
inode->i_mode = S_IFREG | S_IRUGO;
inode->i_fop = &openpromfs_prop_ops;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_size = ent_oi->u.prop->length;
break;
}
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index af9fdf0..bd8ae78 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -49,18 +49,20 @@
#define ldm_error(f, a...) _ldm_printk (KERN_ERR, __func__, f, ##a)
#define ldm_info(f, a...) _ldm_printk (KERN_INFO, __func__, f, ##a)
-__attribute__ ((format (printf, 3, 4)))
-static void _ldm_printk (const char *level, const char *function,
- const char *fmt, ...)
+static __printf(3, 4)
+void _ldm_printk(const char *level, const char *function, const char *fmt, ...)
{
- static char buf[128];
+ struct va_format vaf;
va_list args;
va_start (args, fmt);
- vsnprintf (buf, sizeof (buf), fmt, args);
- va_end (args);
- printk ("%s%s(): %s\n", level, function, buf);
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ printk("%s%s(): %pV\n", level, function, &vaf);
+
+ va_end(args);
}
/**
diff --git a/fs/pipe.c b/fs/pipe.c
index 0e0be1d..4065f07 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1254,6 +1254,7 @@
static const struct super_operations pipefs_ops = {
.destroy_inode = free_inode_nonrcu,
+ .statfs = simple_statfs,
};
/*
diff --git a/fs/posix_acl.c b/fs/posix_acl.c
index 10027b4..cea4623 100644
--- a/fs/posix_acl.c
+++ b/fs/posix_acl.c
@@ -218,6 +218,8 @@
const struct posix_acl_entry *pa, *pe, *mask_obj;
int found = 0;
+ want &= MAY_READ | MAY_WRITE | MAY_EXEC | MAY_NOT_BLOCK;
+
FOREACH_ACL_ENTRY(pa, acl, pe) {
switch(pa->e_tag) {
case ACL_USER_OBJ:
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 5eb0206..2db1bd3 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1107,13 +1107,6 @@
goto err_sighand;
}
- if (oom_adjust != task->signal->oom_adj) {
- if (oom_adjust == OOM_DISABLE)
- atomic_inc(&task->mm->oom_disable_count);
- if (task->signal->oom_adj == OOM_DISABLE)
- atomic_dec(&task->mm->oom_disable_count);
- }
-
/*
* Warn that /proc/pid/oom_adj is deprecated, see
* Documentation/feature-removal-schedule.txt.
@@ -1215,12 +1208,6 @@
goto err_sighand;
}
- if (oom_score_adj != task->signal->oom_score_adj) {
- if (oom_score_adj == OOM_SCORE_ADJ_MIN)
- atomic_inc(&task->mm->oom_disable_count);
- if (task->signal->oom_score_adj == OOM_SCORE_ADJ_MIN)
- atomic_dec(&task->mm->oom_disable_count);
- }
task->signal->oom_score_adj = oom_score_adj;
if (has_capability_noaudit(current, CAP_SYS_RESOURCE))
task->signal->oom_score_adj_min = oom_score_adj;
@@ -1665,12 +1652,46 @@
return error;
}
+static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct inode *inode = dentry->d_inode;
+ struct task_struct *task = get_proc_task(inode);
+ int rc;
+
+ if (task == NULL)
+ return -ESRCH;
+
+ rc = -EACCES;
+ if (lock_trace(task))
+ goto out_task;
+
+ generic_fillattr(inode, stat);
+ unlock_trace(task);
+ rc = 0;
+out_task:
+ put_task_struct(task);
+ return rc;
+}
+
static const struct inode_operations proc_pid_link_inode_operations = {
.readlink = proc_pid_readlink,
.follow_link = proc_pid_follow_link,
.setattr = proc_setattr,
};
+static const struct inode_operations proc_fdinfo_link_inode_operations = {
+ .setattr = proc_setattr,
+ .getattr = proc_pid_fd_link_getattr,
+};
+
+static const struct inode_operations proc_fd_link_inode_operations = {
+ .readlink = proc_pid_readlink,
+ .follow_link = proc_pid_follow_link,
+ .setattr = proc_setattr,
+ .getattr = proc_pid_fd_link_getattr,
+};
+
/* building an inode */
@@ -1902,49 +1923,61 @@
static int proc_fd_info(struct inode *inode, struct path *path, char *info)
{
- struct task_struct *task = get_proc_task(inode);
- struct files_struct *files = NULL;
+ struct task_struct *task;
+ struct files_struct *files;
struct file *file;
int fd = proc_fd(inode);
+ int rc;
- if (task) {
- files = get_files_struct(task);
- put_task_struct(task);
- }
- if (files) {
- /*
- * We are not taking a ref to the file structure, so we must
- * hold ->file_lock.
- */
- spin_lock(&files->file_lock);
- file = fcheck_files(files, fd);
- if (file) {
- unsigned int f_flags;
- struct fdtable *fdt;
+ task = get_proc_task(inode);
+ if (!task)
+ return -ENOENT;
- fdt = files_fdtable(files);
- f_flags = file->f_flags & ~O_CLOEXEC;
- if (FD_ISSET(fd, fdt->close_on_exec))
- f_flags |= O_CLOEXEC;
+ rc = -EACCES;
+ if (lock_trace(task))
+ goto out_task;
- if (path) {
- *path = file->f_path;
- path_get(&file->f_path);
- }
- if (info)
- snprintf(info, PROC_FDINFO_MAX,
- "pos:\t%lli\n"
- "flags:\t0%o\n",
- (long long) file->f_pos,
- f_flags);
- spin_unlock(&files->file_lock);
- put_files_struct(files);
- return 0;
+ rc = -ENOENT;
+ files = get_files_struct(task);
+ if (files == NULL)
+ goto out_unlock;
+
+ /*
+ * We are not taking a ref to the file structure, so we must
+ * hold ->file_lock.
+ */
+ spin_lock(&files->file_lock);
+ file = fcheck_files(files, fd);
+ if (file) {
+ unsigned int f_flags;
+ struct fdtable *fdt;
+
+ fdt = files_fdtable(files);
+ f_flags = file->f_flags & ~O_CLOEXEC;
+ if (FD_ISSET(fd, fdt->close_on_exec))
+ f_flags |= O_CLOEXEC;
+
+ if (path) {
+ *path = file->f_path;
+ path_get(&file->f_path);
}
- spin_unlock(&files->file_lock);
- put_files_struct(files);
- }
- return -ENOENT;
+ if (info)
+ snprintf(info, PROC_FDINFO_MAX,
+ "pos:\t%lli\n"
+ "flags:\t0%o\n",
+ (long long) file->f_pos,
+ f_flags);
+ rc = 0;
+ } else
+ rc = -ENOENT;
+ spin_unlock(&files->file_lock);
+ put_files_struct(files);
+
+out_unlock:
+ unlock_trace(task);
+out_task:
+ put_task_struct(task);
+ return rc;
}
static int proc_fd_link(struct inode *inode, struct path *path)
@@ -2039,7 +2072,7 @@
spin_unlock(&files->file_lock);
put_files_struct(files);
- inode->i_op = &proc_pid_link_inode_operations;
+ inode->i_op = &proc_fd_link_inode_operations;
inode->i_size = 64;
ei->op.proc_get_link = proc_fd_link;
d_set_d_op(dentry, &tid_fd_dentry_operations);
@@ -2071,7 +2104,12 @@
if (fd == ~0U)
goto out;
+ result = ERR_PTR(-EACCES);
+ if (lock_trace(task))
+ goto out;
+
result = instantiate(dir, dentry, task, &fd);
+ unlock_trace(task);
out:
put_task_struct(task);
out_no_task:
@@ -2091,23 +2129,28 @@
retval = -ENOENT;
if (!p)
goto out_no_task;
+
+ retval = -EACCES;
+ if (lock_trace(p))
+ goto out;
+
retval = 0;
fd = filp->f_pos;
switch (fd) {
case 0:
if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0)
- goto out;
+ goto out_unlock;
filp->f_pos++;
case 1:
ino = parent_ino(dentry);
if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0)
- goto out;
+ goto out_unlock;
filp->f_pos++;
default:
files = get_files_struct(p);
if (!files)
- goto out;
+ goto out_unlock;
rcu_read_lock();
for (fd = filp->f_pos-2;
fd < files_fdtable(files)->max_fds;
@@ -2131,6 +2174,9 @@
rcu_read_unlock();
put_files_struct(files);
}
+
+out_unlock:
+ unlock_trace(p);
out:
put_task_struct(p);
out_no_task:
@@ -2208,6 +2254,7 @@
ei->fd = fd;
inode->i_mode = S_IFREG | S_IRUSR;
inode->i_fop = &proc_fdinfo_file_operations;
+ inode->i_op = &proc_fdinfo_link_inode_operations;
d_set_d_op(dentry, &tid_fd_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
@@ -2261,7 +2308,7 @@
ei = PROC_I(inode);
inode->i_mode = p->mode;
if (S_ISDIR(inode->i_mode))
- inode->i_nlink = 2; /* Use getattr to fix if necessary */
+ set_nlink(inode, 2); /* Use getattr to fix if necessary */
if (p->iop)
inode->i_op = p->iop;
if (p->fop)
@@ -2655,7 +2702,7 @@
inode->i_mode = p->mode;
if (S_ISDIR(inode->i_mode))
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
if (S_ISLNK(inode->i_mode))
inode->i_size = 64;
if (p->iop)
@@ -2994,8 +3041,8 @@
inode->i_fop = &proc_tgid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff,
- ARRAY_SIZE(tgid_base_stuff));
+ set_nlink(inode, 2 + pid_entry_count_dirs(tgid_base_stuff,
+ ARRAY_SIZE(tgid_base_stuff)));
d_set_d_op(dentry, &pid_dentry_operations);
@@ -3246,8 +3293,8 @@
inode->i_fop = &proc_tid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff,
- ARRAY_SIZE(tid_base_stuff));
+ set_nlink(inode, 2 + pid_entry_count_dirs(tid_base_stuff,
+ ARRAY_SIZE(tid_base_stuff)));
d_set_d_op(dentry, &pid_dentry_operations);
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 9d99131..10090d9 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -283,7 +283,7 @@
struct inode *inode = dentry->d_inode;
struct proc_dir_entry *de = PROC_I(inode)->pde;
if (de && de->nlink)
- inode->i_nlink = de->nlink;
+ set_nlink(inode, de->nlink);
generic_fillattr(inode, stat);
return 0;
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 7ed72d6c..7737c54 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -445,7 +445,7 @@
if (de->size)
inode->i_size = de->size;
if (de->nlink)
- inode->i_nlink = de->nlink;
+ set_nlink(inode, de->nlink);
if (de->proc_iops)
inode->i_op = de->proc_iops;
if (de->proc_fops) {
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 1a77dbe..a6b6217 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -3,6 +3,7 @@
*/
#include <linux/init.h>
#include <linux/sysctl.h>
+#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/security.h>
#include <linux/namei.h>
@@ -14,6 +15,15 @@
static const struct file_operations proc_sys_dir_file_operations;
static const struct inode_operations proc_sys_dir_operations;
+void proc_sys_poll_notify(struct ctl_table_poll *poll)
+{
+ if (!poll)
+ return;
+
+ atomic_inc(&poll->event);
+ wake_up_interruptible(&poll->wait);
+}
+
static struct inode *proc_sys_make_inode(struct super_block *sb,
struct ctl_table_header *head, struct ctl_table *table)
{
@@ -39,7 +49,7 @@
inode->i_fop = &proc_sys_file_operations;
} else {
inode->i_mode |= S_IFDIR;
- inode->i_nlink = 0;
+ clear_nlink(inode);
inode->i_op = &proc_sys_dir_operations;
inode->i_fop = &proc_sys_dir_file_operations;
}
@@ -176,6 +186,39 @@
return proc_sys_call_handler(filp, (void __user *)buf, count, ppos, 1);
}
+static int proc_sys_open(struct inode *inode, struct file *filp)
+{
+ struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+
+ if (table->poll)
+ filp->private_data = proc_sys_poll_event(table->poll);
+
+ return 0;
+}
+
+static unsigned int proc_sys_poll(struct file *filp, poll_table *wait)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+ unsigned long event = (unsigned long)filp->private_data;
+ unsigned int ret = DEFAULT_POLLMASK;
+
+ if (!table->proc_handler)
+ goto out;
+
+ if (!table->poll)
+ goto out;
+
+ poll_wait(filp, &table->poll->wait, wait);
+
+ if (event != atomic_read(&table->poll->event)) {
+ filp->private_data = proc_sys_poll_event(table->poll);
+ ret = POLLIN | POLLRDNORM | POLLERR | POLLPRI;
+ }
+
+out:
+ return ret;
+}
static int proc_sys_fill_cache(struct file *filp, void *dirent,
filldir_t filldir,
@@ -364,12 +407,15 @@
}
static const struct file_operations proc_sys_file_operations = {
+ .open = proc_sys_open,
+ .poll = proc_sys_poll,
.read = proc_sys_read,
.write = proc_sys_write,
.llseek = default_llseek,
};
static const struct file_operations proc_sys_dir_file_operations = {
+ .read = generic_read_dir,
.readdir = proc_sys_readdir,
.llseek = generic_file_llseek,
};
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 5afaa58..e418c5a 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -44,6 +44,7 @@
"VmPeak:\t%8lu kB\n"
"VmSize:\t%8lu kB\n"
"VmLck:\t%8lu kB\n"
+ "VmPin:\t%8lu kB\n"
"VmHWM:\t%8lu kB\n"
"VmRSS:\t%8lu kB\n"
"VmData:\t%8lu kB\n"
@@ -55,6 +56,7 @@
hiwater_vm << (PAGE_SHIFT-10),
(total_vm - mm->reserved_vm) << (PAGE_SHIFT-10),
mm->locked_vm << (PAGE_SHIFT-10),
+ mm->pinned_vm << (PAGE_SHIFT-10),
hiwater_rss << (PAGE_SHIFT-10),
total_rss << (PAGE_SHIFT-10),
data << (PAGE_SHIFT-10),
@@ -1039,6 +1041,9 @@
seq_printf(m, " stack");
}
+ if (is_vm_hugetlb_page(vma))
+ seq_printf(m, " huge");
+
walk_page_range(vma->vm_start, vma->vm_end, &walk);
if (!md->pages)
diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index 893b961..379a02d 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -24,6 +24,7 @@
#include <linux/highmem.h>
#include <linux/time.h>
#include <linux/init.h>
+#include <linux/list.h>
#include <linux/string.h>
#include <linux/mount.h>
#include <linux/ramfs.h>
@@ -32,13 +33,18 @@
#include <linux/magic.h>
#include <linux/pstore.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include "internal.h"
#define PSTORE_NAMELEN 64
+static DEFINE_SPINLOCK(allpstore_lock);
+static LIST_HEAD(allpstore);
+
struct pstore_private {
+ struct list_head list;
struct pstore_info *psi;
enum pstore_type_id type;
u64 id;
@@ -81,8 +87,16 @@
static void pstore_evict_inode(struct inode *inode)
{
+ struct pstore_private *p = inode->i_private;
+ unsigned long flags;
+
end_writeback(inode);
- kfree(inode->i_private);
+ if (p) {
+ spin_lock_irqsave(&allpstore_lock, flags);
+ list_del(&p->list);
+ spin_unlock_irqrestore(&allpstore_lock, flags);
+ kfree(p);
+ }
}
static const struct inode_operations pstore_dir_inode_operations = {
@@ -182,9 +196,23 @@
struct dentry *root = pstore_sb->s_root;
struct dentry *dentry;
struct inode *inode;
- int rc;
+ int rc = 0;
char name[PSTORE_NAMELEN];
- struct pstore_private *private;
+ struct pstore_private *private, *pos;
+ unsigned long flags;
+
+ spin_lock_irqsave(&allpstore_lock, flags);
+ list_for_each_entry(pos, &allpstore, list) {
+ if (pos->type == type &&
+ pos->id == id &&
+ pos->psi == psi) {
+ rc = -EEXIST;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&allpstore_lock, flags);
+ if (rc)
+ return rc;
rc = -ENOMEM;
inode = pstore_get_inode(pstore_sb, root->d_inode, S_IFREG | 0444, 0);
@@ -229,6 +257,10 @@
d_add(dentry, inode);
+ spin_lock_irqsave(&allpstore_lock, flags);
+ list_add(&private->list, &allpstore);
+ spin_unlock_irqrestore(&allpstore_lock, flags);
+
mutex_unlock(&root->d_inode->i_mutex);
return 0;
@@ -277,7 +309,7 @@
goto fail;
}
- pstore_get_records();
+ pstore_get_records(0);
return 0;
fail:
diff --git a/fs/pstore/internal.h b/fs/pstore/internal.h
index 611c1b3..3bde461 100644
--- a/fs/pstore/internal.h
+++ b/fs/pstore/internal.h
@@ -1,5 +1,5 @@
extern void pstore_set_kmsg_bytes(int);
-extern void pstore_get_records(void);
+extern void pstore_get_records(int);
extern int pstore_mkfile(enum pstore_type_id, char *psname, u64 id,
char *data, size_t size,
struct timespec time, struct pstore_info *psi);
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index c5300ec..2bd620f 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -25,12 +25,30 @@
#include <linux/module.h>
#include <linux/pstore.h>
#include <linux/string.h>
+#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+#include <linux/workqueue.h>
#include "internal.h"
/*
+ * We defer making "oops" entries appear in pstore - see
+ * whether the system is actually still running well enough
+ * to let someone see the entry
+ */
+#define PSTORE_INTERVAL (60 * HZ)
+
+static int pstore_new_entry;
+
+static void pstore_timefunc(unsigned long);
+static DEFINE_TIMER(pstore_timer, pstore_timefunc, 0, 0);
+
+static void pstore_dowork(struct work_struct *);
+static DECLARE_WORK(pstore_work, pstore_dowork);
+
+/*
* pstore_lock just protects "psinfo" during
* calls to pstore_register()
*/
@@ -69,15 +87,22 @@
unsigned long size, total = 0;
char *dst, *why;
u64 id;
- int hsize;
+ int hsize, ret;
unsigned int part = 1;
+ unsigned long flags = 0;
+ int is_locked = 0;
if (reason < ARRAY_SIZE(reason_str))
why = reason_str[reason];
else
why = "Unknown";
- mutex_lock(&psinfo->buf_mutex);
+ if (in_nmi()) {
+ is_locked = spin_trylock(&psinfo->buf_lock);
+ if (!is_locked)
+ pr_err("pstore dump routine blocked in NMI, may corrupt error record\n");
+ } else
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
while (total < kmsg_bytes) {
dst = psinfo->buf;
@@ -97,18 +122,20 @@
memcpy(dst, s1 + s1_start, l1_cpy);
memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
- id = psinfo->write(PSTORE_TYPE_DMESG, part,
+ ret = psinfo->write(PSTORE_TYPE_DMESG, &id, part,
hsize + l1_cpy + l2_cpy, psinfo);
- if (reason == KMSG_DUMP_OOPS && pstore_is_mounted())
- pstore_mkfile(PSTORE_TYPE_DMESG, psinfo->name, id,
- psinfo->buf, hsize + l1_cpy + l2_cpy,
- CURRENT_TIME, psinfo);
+ if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
+ pstore_new_entry = 1;
l1 -= l1_cpy;
l2 -= l2_cpy;
total += l1_cpy + l2_cpy;
part++;
}
- mutex_unlock(&psinfo->buf_mutex);
+ if (in_nmi()) {
+ if (is_locked)
+ spin_unlock(&psinfo->buf_lock);
+ } else
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
}
static struct kmsg_dumper pstore_dumper = {
@@ -148,19 +175,24 @@
}
if (pstore_is_mounted())
- pstore_get_records();
+ pstore_get_records(0);
kmsg_dump_register(&pstore_dumper);
+ pstore_timer.expires = jiffies + PSTORE_INTERVAL;
+ add_timer(&pstore_timer);
+
return 0;
}
EXPORT_SYMBOL_GPL(pstore_register);
/*
- * Read all the records from the persistent store. Create and
- * file files in our filesystem.
+ * Read all the records from the persistent store. Create
+ * files in our filesystem. Don't warn about -EEXIST errors
+ * when we are re-scanning the backing store looking to add new
+ * error records.
*/
-void pstore_get_records(void)
+void pstore_get_records(int quiet)
{
struct pstore_info *psi = psinfo;
ssize_t size;
@@ -168,36 +200,55 @@
enum pstore_type_id type;
struct timespec time;
int failed = 0, rc;
+ unsigned long flags;
if (!psi)
return;
- mutex_lock(&psinfo->buf_mutex);
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
rc = psi->open(psi);
if (rc)
goto out;
while ((size = psi->read(&id, &type, &time, psi)) > 0) {
- if (pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size,
- time, psi))
+ rc = pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size,
+ time, psi);
+ if (rc && (rc != -EEXIST || !quiet))
failed++;
}
psi->close(psi);
out:
- mutex_unlock(&psinfo->buf_mutex);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
if (failed)
printk(KERN_WARNING "pstore: failed to load %d record(s) from '%s'\n",
failed, psi->name);
}
+static void pstore_dowork(struct work_struct *work)
+{
+ pstore_get_records(1);
+}
+
+static void pstore_timefunc(unsigned long dummy)
+{
+ if (pstore_new_entry) {
+ pstore_new_entry = 0;
+ schedule_work(&pstore_work);
+ }
+
+ mod_timer(&pstore_timer, jiffies + PSTORE_INTERVAL);
+}
+
/*
* Call platform driver to write a record to the
* persistent store.
*/
int pstore_write(enum pstore_type_id type, char *buf, size_t size)
{
- u64 id;
+ u64 id;
+ int ret;
+ unsigned long flags;
if (!psinfo)
return -ENODEV;
@@ -205,13 +256,13 @@
if (size > psinfo->bufsize)
return -EFBIG;
- mutex_lock(&psinfo->buf_mutex);
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
memcpy(psinfo->buf, buf, size);
- id = psinfo->write(type, 0, size, psinfo);
- if (pstore_is_mounted())
+ ret = psinfo->write(type, &id, 0, size, psinfo);
+ if (ret == 0 && pstore_is_mounted())
pstore_mkfile(PSTORE_TYPE_DMESG, psinfo->name, id, psinfo->buf,
size, CURRENT_TIME, psinfo);
- mutex_unlock(&psinfo->buf_mutex);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
return 0;
}
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index 2b06466..3bdd214 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -379,7 +379,7 @@
inode->i_mode = le16_to_cpu(raw_inode->di_mode);
inode->i_uid = (uid_t)le16_to_cpu(raw_inode->di_uid);
inode->i_gid = (gid_t)le16_to_cpu(raw_inode->di_gid);
- inode->i_nlink = le16_to_cpu(raw_inode->di_nlink);
+ set_nlink(inode, le16_to_cpu(raw_inode->di_nlink));
inode->i_size = le32_to_cpu(raw_inode->di_size);
inode->i_mtime.tv_sec = le32_to_cpu(raw_inode->di_mtime);
inode->i_mtime.tv_nsec = 0;
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index 10b6be3..aae0edb 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -363,12 +363,15 @@
}
sb = quotactl_block(special);
- if (IS_ERR(sb))
- return PTR_ERR(sb);
+ if (IS_ERR(sb)) {
+ ret = PTR_ERR(sb);
+ goto out;
+ }
ret = do_quotactl(sb, type, cmds, id, addr, pathp);
drop_super(sb);
+out:
if (pathp && !IS_ERR(pathp))
path_put(pathp);
return ret;
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index eacb166..462ceb3 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -23,7 +23,6 @@
* caches is sufficient.
*/
-#include <linux/module.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
@@ -288,14 +287,7 @@
{
return register_filesystem(&ramfs_fs_type);
}
-
-static void __exit exit_ramfs_fs(void)
-{
- unregister_filesystem(&ramfs_fs_type);
-}
-
module_init(init_ramfs_fs)
-module_exit(exit_ramfs_fs)
int __init init_rootfs(void)
{
@@ -311,5 +303,3 @@
return err;
}
-
-MODULE_LICENSE("GPL");
diff --git a/fs/read_write.c b/fs/read_write.c
index 179f1c3..5ad4248 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -35,23 +35,45 @@
return file->f_mode & FMODE_UNSIGNED_OFFSET;
}
+static loff_t lseek_execute(struct file *file, struct inode *inode,
+ loff_t offset, loff_t maxsize)
+{
+ if (offset < 0 && !unsigned_offsets(file))
+ return -EINVAL;
+ if (offset > maxsize)
+ return -EINVAL;
+
+ if (offset != file->f_pos) {
+ file->f_pos = offset;
+ file->f_version = 0;
+ }
+ return offset;
+}
+
/**
- * generic_file_llseek_unlocked - lockless generic llseek implementation
+ * generic_file_llseek_size - generic llseek implementation for regular files
* @file: file structure to seek on
* @offset: file offset to seek to
* @origin: type of seek
+ * @size: max size of file system
*
- * Updates the file offset to the value specified by @offset and @origin.
- * Locking must be provided by the caller.
+ * This is a variant of generic_file_llseek that allows passing in a custom
+ * file size.
+ *
+ * Synchronization:
+ * SEEK_SET and SEEK_END are unsynchronized (but atomic on 64bit platforms)
+ * SEEK_CUR is synchronized against other SEEK_CURs, but not read/writes.
+ * read/writes behave like SEEK_SET against seeks.
*/
loff_t
-generic_file_llseek_unlocked(struct file *file, loff_t offset, int origin)
+generic_file_llseek_size(struct file *file, loff_t offset, int origin,
+ loff_t maxsize)
{
struct inode *inode = file->f_mapping->host;
switch (origin) {
case SEEK_END:
- offset += inode->i_size;
+ offset += i_size_read(inode);
break;
case SEEK_CUR:
/*
@@ -62,14 +84,22 @@
*/
if (offset == 0)
return file->f_pos;
- offset += file->f_pos;
- break;
+ /*
+ * f_lock protects against read/modify/write race with other
+ * SEEK_CURs. Note that parallel writes and reads behave
+ * like SEEK_SET.
+ */
+ spin_lock(&file->f_lock);
+ offset = lseek_execute(file, inode, file->f_pos + offset,
+ maxsize);
+ spin_unlock(&file->f_lock);
+ return offset;
case SEEK_DATA:
/*
* In the generic case the entire file is data, so as long as
* offset isn't at the end of the file then the offset is data.
*/
- if (offset >= inode->i_size)
+ if (offset >= i_size_read(inode))
return -ENXIO;
break;
case SEEK_HOLE:
@@ -77,26 +107,15 @@
* There is a virtual hole at the end of the file, so as long as
* offset isn't i_size or larger, return i_size.
*/
- if (offset >= inode->i_size)
+ if (offset >= i_size_read(inode))
return -ENXIO;
- offset = inode->i_size;
+ offset = i_size_read(inode);
break;
}
- if (offset < 0 && !unsigned_offsets(file))
- return -EINVAL;
- if (offset > inode->i_sb->s_maxbytes)
- return -EINVAL;
-
- /* Special lock needed here? */
- if (offset != file->f_pos) {
- file->f_pos = offset;
- file->f_version = 0;
- }
-
- return offset;
+ return lseek_execute(file, inode, offset, maxsize);
}
-EXPORT_SYMBOL(generic_file_llseek_unlocked);
+EXPORT_SYMBOL(generic_file_llseek_size);
/**
* generic_file_llseek - generic llseek implementation for regular files
@@ -110,13 +129,10 @@
*/
loff_t generic_file_llseek(struct file *file, loff_t offset, int origin)
{
- loff_t rval;
+ struct inode *inode = file->f_mapping->host;
- mutex_lock(&file->f_dentry->d_inode->i_mutex);
- rval = generic_file_llseek_unlocked(file, offset, origin);
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-
- return rval;
+ return generic_file_llseek_size(file, offset, origin,
+ inode->i_sb->s_maxbytes);
}
EXPORT_SYMBOL(generic_file_llseek);
@@ -617,7 +633,8 @@
ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
unsigned long nr_segs, unsigned long fast_segs,
struct iovec *fast_pointer,
- struct iovec **ret_pointer)
+ struct iovec **ret_pointer,
+ int check_access)
{
unsigned long seg;
ssize_t ret;
@@ -673,7 +690,8 @@
ret = -EINVAL;
goto out;
}
- if (unlikely(!access_ok(vrfy_dir(type), buf, len))) {
+ if (check_access
+ && unlikely(!access_ok(vrfy_dir(type), buf, len))) {
ret = -EFAULT;
goto out;
}
@@ -705,7 +723,7 @@
}
ret = rw_copy_check_uvector(type, uvector, nr_segs,
- ARRAY_SIZE(iovstack), iovstack, &iov);
+ ARRAY_SIZE(iovstack), iovstack, &iov, 1);
if (ret <= 0)
goto out;
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 9b0d4b78..950f13a 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1154,7 +1154,7 @@
set_inode_item_key_version(inode, KEY_FORMAT_3_5);
set_inode_sd_version(inode, STAT_DATA_V1);
inode->i_mode = sd_v1_mode(sd);
- inode->i_nlink = sd_v1_nlink(sd);
+ set_nlink(inode, sd_v1_nlink(sd));
inode->i_uid = sd_v1_uid(sd);
inode->i_gid = sd_v1_gid(sd);
inode->i_size = sd_v1_size(sd);
@@ -1199,7 +1199,7 @@
struct stat_data *sd = (struct stat_data *)B_I_PITEM(bh, ih);
inode->i_mode = sd_v2_mode(sd);
- inode->i_nlink = sd_v2_nlink(sd);
+ set_nlink(inode, sd_v2_nlink(sd));
inode->i_uid = sd_v2_uid(sd);
inode->i_size = sd_v2_size(sd);
inode->i_gid = sd_v2_gid(sd);
@@ -1444,7 +1444,7 @@
/* a stale NFS handle can trigger this without it being an error */
pathrelse(&path_to_sd);
reiserfs_make_bad_inode(inode);
- inode->i_nlink = 0;
+ clear_nlink(inode);
return;
}
@@ -1832,7 +1832,7 @@
#endif
/* fill stat data */
- inode->i_nlink = (S_ISDIR(mode) ? 2 : 1);
+ set_nlink(inode, (S_ISDIR(mode) ? 2 : 1));
/* uid and gid must already be set by the caller for quota init */
@@ -1987,7 +1987,7 @@
make_bad_inode(inode);
out_inserted_sd:
- inode->i_nlink = 0;
+ clear_nlink(inode);
th->t_trans_id = 0; /* so the caller can't use this handle later */
unlock_new_inode(inode); /* OK to do even if we hadn't locked it */
iput(inode);
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index ef39232..80058e8 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -19,7 +19,7 @@
#include <linux/reiserfs_xattr.h>
#include <linux/quotaops.h>
-#define INC_DIR_INODE_NLINK(i) if (i->i_nlink != 1) { inc_nlink(i); if (i->i_nlink >= REISERFS_LINK_MAX) i->i_nlink=1; }
+#define INC_DIR_INODE_NLINK(i) if (i->i_nlink != 1) { inc_nlink(i); if (i->i_nlink >= REISERFS_LINK_MAX) set_nlink(i, 1); }
#define DEC_DIR_INODE_NLINK(i) if (i->i_nlink != 1) drop_nlink(i);
// directory item contains array of entry headers. This performs
@@ -622,7 +622,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
if (err)
@@ -702,7 +702,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
if (err)
@@ -787,7 +787,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink = 0;
+ clear_nlink(inode);
DEC_DIR_INODE_NLINK(dir);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
@@ -964,7 +964,7 @@
reiserfs_warning(inode->i_sb, "reiserfs-7042",
"deleting nonexistent file (%lu), %d",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
drop_nlink(inode);
@@ -1086,7 +1086,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, parent_dir->i_sb, jbegin_count);
if (err)
@@ -1129,7 +1129,7 @@
retval = journal_begin(&th, dir->i_sb, jbegin_count);
if (retval) {
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_write_unlock(dir->i_sb);
return retval;
}
@@ -1144,7 +1144,7 @@
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
reiserfs_write_unlock(dir->i_sb);
return err ? err : retval;
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index 2305e31..8b4089f 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -337,7 +337,7 @@
inode->i_metasize = (ROMFH_SIZE + nlen + 1 + ROMFH_PAD) & ROMFH_MASK;
inode->i_dataoffset = pos + inode->i_metasize;
- i->i_nlink = 1; /* Hard to decide.. */
+ set_nlink(i, 1); /* Hard to decide.. */
i->i_size = be32_to_cpu(ri.size);
i->i_mtime.tv_sec = i->i_atime.tv_sec = i->i_ctime.tv_sec = 0;
i->i_mtime.tv_nsec = i->i_atime.tv_nsec = i->i_ctime.tv_nsec = 0;
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index 04bebca..fd7b3b3 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -159,7 +159,7 @@
frag_offset = 0;
}
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_size = le32_to_cpu(sqsh_ino->file_size);
inode->i_fop = &generic_ro_fops;
inode->i_mode |= S_IFREG;
@@ -203,7 +203,7 @@
}
xattr_id = le32_to_cpu(sqsh_ino->xattr);
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le64_to_cpu(sqsh_ino->file_size);
inode->i_op = &squashfs_inode_ops;
inode->i_fop = &generic_ro_fops;
@@ -232,7 +232,7 @@
if (err < 0)
goto failed_read;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le16_to_cpu(sqsh_ino->file_size);
inode->i_op = &squashfs_dir_inode_ops;
inode->i_fop = &squashfs_dir_ops;
@@ -257,7 +257,7 @@
goto failed_read;
xattr_id = le32_to_cpu(sqsh_ino->xattr);
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le32_to_cpu(sqsh_ino->file_size);
inode->i_op = &squashfs_dir_inode_ops;
inode->i_fop = &squashfs_dir_ops;
@@ -284,7 +284,7 @@
if (err < 0)
goto failed_read;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le32_to_cpu(sqsh_ino->symlink_size);
inode->i_op = &squashfs_symlink_inode_ops;
inode->i_data.a_ops = &squashfs_symlink_aops;
@@ -325,7 +325,7 @@
inode->i_mode |= S_IFCHR;
else
inode->i_mode |= S_IFBLK;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
rdev = le32_to_cpu(sqsh_ino->rdev);
init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
@@ -349,7 +349,7 @@
inode->i_mode |= S_IFBLK;
xattr_id = le32_to_cpu(sqsh_ino->xattr);
inode->i_op = &squashfs_inode_ops;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
rdev = le32_to_cpu(sqsh_ino->rdev);
init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
@@ -370,7 +370,7 @@
inode->i_mode |= S_IFIFO;
else
inode->i_mode |= S_IFSOCK;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
init_special_inode(inode, inode->i_mode, 0);
break;
}
@@ -389,7 +389,7 @@
inode->i_mode |= S_IFSOCK;
xattr_id = le32_to_cpu(sqsh_ino->xattr);
inode->i_op = &squashfs_inode_ops;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
init_special_inode(inode, inode->i_mode, 0);
break;
}
diff --git a/fs/stack.c b/fs/stack.c
index b4f2ab48..9c11519 100644
--- a/fs/stack.c
+++ b/fs/stack.c
@@ -71,6 +71,6 @@
dest->i_ctime = src->i_ctime;
dest->i_blkbits = src->i_blkbits;
dest->i_flags = src->i_flags;
- dest->i_nlink = src->i_nlink;
+ set_nlink(dest, src->i_nlink);
}
EXPORT_SYMBOL_GPL(fsstack_copy_attr_all);
diff --git a/fs/stat.c b/fs/stat.c
index 78a3aa8..8806b89 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -294,15 +294,16 @@
{
struct path path;
int error;
+ int empty = 0;
if (bufsiz <= 0)
return -EINVAL;
- error = user_path_at(dfd, pathname, LOOKUP_EMPTY, &path);
+ error = user_path_at_empty(dfd, pathname, LOOKUP_EMPTY, &path, &empty);
if (!error) {
struct inode *inode = path.dentry->d_inode;
- error = -EINVAL;
+ error = empty ? -ENOENT : -EINVAL;
if (inode->i_op->readlink) {
error = security_inode_readlink(path.dentry);
if (!error) {
diff --git a/fs/super.c b/fs/super.c
index 3f56a26..afd0f1a 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -61,7 +61,7 @@
return -1;
if (!grab_super_passive(sb))
- return -1;
+ return !sc->nr_to_scan ? 0 : -1;
if (sb->s_op && sb->s_op->nr_cached_objects)
fs_objects = sb->s_op->nr_cached_objects(sb);
@@ -727,8 +727,13 @@
if (sb->s_op->remount_fs) {
retval = sb->s_op->remount_fs(sb, &flags, data);
- if (retval)
- return retval;
+ if (retval) {
+ if (!force)
+ return retval;
+ /* If forced remount, go ahead despite any errors */
+ WARN(1, "forced remount of a %s fs returned %i\n",
+ sb->s_type->name, retval);
+ }
}
sb->s_flags = (sb->s_flags & ~MS_RMT_MASK) | (flags & MS_RMT_MASK);
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 48ffbdf0..7fdf6a7 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -865,15 +865,13 @@
sd->s_name = new_name;
}
- /* Remove from old parent's list and insert into new parent's list. */
- if (sd->s_parent != new_parent_sd) {
- sysfs_unlink_sibling(sd);
- sysfs_get(new_parent_sd);
- sysfs_put(sd->s_parent);
- sd->s_parent = new_parent_sd;
- sysfs_link_sibling(sd);
- }
+ /* Move to the appropriate place in the appropriate directories rbtree. */
+ sysfs_unlink_sibling(sd);
+ sysfs_get(new_parent_sd);
+ sysfs_put(sd->s_parent);
sd->s_ns = new_ns;
+ sd->s_parent = new_parent_sd;
+ sysfs_link_sibling(sd);
error = 0;
out:
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index e23f288..c81b22f3 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -218,7 +218,7 @@
}
if (sysfs_type(sd) == SYSFS_DIR)
- inode->i_nlink = sd->s_dir.subdirs + 2;
+ set_nlink(inode, sd->s_dir.subdirs + 2);
}
int sysfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 0630eb96..25ffb3e 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -219,7 +219,7 @@
inode->i_mode = fs16_to_cpu(sbi, raw_inode->i_mode);
inode->i_uid = (uid_t)fs16_to_cpu(sbi, raw_inode->i_uid);
inode->i_gid = (gid_t)fs16_to_cpu(sbi, raw_inode->i_gid);
- inode->i_nlink = fs16_to_cpu(sbi, raw_inode->i_nlink);
+ set_nlink(inode, fs16_to_cpu(sbi, raw_inode->i_nlink));
inode->i_size = fs32_to_cpu(sbi, raw_inode->i_size);
inode->i_atime.tv_sec = fs32_to_cpu(sbi, raw_inode->i_atime);
inode->i_mtime.tv_sec = fs32_to_cpu(sbi, raw_inode->i_mtime);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index b281212..20403dc 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -129,7 +129,7 @@
goto out_ino;
inode->i_flags |= (S_NOCMTIME | S_NOATIME);
- inode->i_nlink = le32_to_cpu(ino->nlink);
+ set_nlink(inode, le32_to_cpu(ino->nlink));
inode->i_uid = le32_to_cpu(ino->uid);
inode->i_gid = le32_to_cpu(ino->gid);
inode->i_atime.tv_sec = (int64_t)le64_to_cpu(ino->atime_sec);
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index 16f19f5..bf18f7a 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -558,10 +558,10 @@
}
ubifs_assert(inode->i_nlink == 1);
- inode->i_nlink = 0;
+ clear_nlink(inode);
err = remove_xattr(c, host, inode, &nm);
if (err)
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
/* If @i_nlink is 0, 'iput()' will delete the inode */
iput(inode);
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index 95518a9..987585b 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -59,8 +59,8 @@
int nr_groups = bitmap->s_nr_groups;
if (block_group >= nr_groups) {
- udf_debug("block_group (%d) > nr_groups (%d)\n", block_group,
- nr_groups);
+ udf_debug("block_group (%d) > nr_groups (%d)\n",
+ block_group, nr_groups);
}
if (bitmap->s_block_bitmap[block_group]) {
@@ -126,8 +126,9 @@
if (bloc->logicalBlockNum + count < count ||
(bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
- bloc->logicalBlockNum, 0, bloc->logicalBlockNum,
- count, partmap->s_partition_len);
+ bloc->logicalBlockNum, 0,
+ bloc->logicalBlockNum, count,
+ partmap->s_partition_len);
goto error_return;
}
@@ -155,7 +156,7 @@
if (udf_set_bit(bit + i, bh->b_data)) {
udf_debug("bit %ld already set\n", bit + i);
udf_debug("byte=%2x\n",
- ((char *)bh->b_data)[(bit + i) >> 3]);
+ ((char *)bh->b_data)[(bit + i) >> 3]);
}
}
udf_add_free_space(sb, sbi->s_partition, count);
@@ -369,7 +370,8 @@
if (bloc->logicalBlockNum + count < count ||
(bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
- bloc->logicalBlockNum, 0, bloc->logicalBlockNum, count,
+ bloc->logicalBlockNum, 0,
+ bloc->logicalBlockNum, count,
partmap->s_partition_len);
goto error_return;
}
diff --git a/fs/udf/directory.c b/fs/udf/directory.c
index 2ffdb67..3e44f57 100644
--- a/fs/udf/directory.c
+++ b/fs/udf/directory.c
@@ -162,8 +162,8 @@
int padlen;
if ((!buffer) || (!offset)) {
- udf_debug("invalidparms\n, buffer=%p, offset=%p\n", buffer,
- offset);
+ udf_debug("invalidparms, buffer=%p, offset=%p\n",
+ buffer, offset);
return NULL;
}
@@ -201,7 +201,7 @@
struct short_ad *sa;
if ((!ptr) || (!offset)) {
- printk(KERN_ERR "udf: udf_get_fileshortad() invalidparms\n");
+ pr_err("%s: invalidparms\n", __func__);
return NULL;
}
@@ -223,7 +223,7 @@
struct long_ad *la;
if ((!ptr) || (!offset)) {
- printk(KERN_ERR "udf: udf_get_filelongad() invalidparms\n");
+ pr_err("%s: invalidparms\n", __func__);
return NULL;
}
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 1d1358e..4fd1d80 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -37,6 +37,7 @@
#include <linux/writeback.h>
#include <linux/slab.h>
#include <linux/crc-itu-t.h>
+#include <linux/mpage.h>
#include "udf_i.h"
#include "udf_sb.h"
@@ -83,12 +84,10 @@
end_writeback(inode);
if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
inode->i_size != iinfo->i_lenExtents) {
- printk(KERN_WARNING "UDF-fs (%s): Inode %lu (mode %o) has "
- "inode size %llu different from extent length %llu. "
- "Filesystem need not be standards compliant.\n",
- inode->i_sb->s_id, inode->i_ino, inode->i_mode,
- (unsigned long long)inode->i_size,
- (unsigned long long)iinfo->i_lenExtents);
+ udf_warn(inode->i_sb, "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
+ inode->i_ino, inode->i_mode,
+ (unsigned long long)inode->i_size,
+ (unsigned long long)iinfo->i_lenExtents);
}
kfree(iinfo->i_ext.i_data);
iinfo->i_ext.i_data = NULL;
@@ -104,7 +103,13 @@
static int udf_readpage(struct file *file, struct page *page)
{
- return block_read_full_page(page, udf_get_block);
+ return mpage_readpage(page, udf_get_block);
+}
+
+static int udf_readpages(struct file *file, struct address_space *mapping,
+ struct list_head *pages, unsigned nr_pages)
+{
+ return mpage_readpages(mapping, pages, nr_pages, udf_get_block);
}
static int udf_write_begin(struct file *file, struct address_space *mapping,
@@ -139,6 +144,7 @@
const struct address_space_operations udf_aops = {
.readpage = udf_readpage,
+ .readpages = udf_readpages,
.writepage = udf_writepage,
.write_begin = udf_write_begin,
.write_end = generic_write_end,
@@ -1169,16 +1175,15 @@
*/
bh = udf_read_ptagged(inode->i_sb, &iinfo->i_location, 0, &ident);
if (!bh) {
- printk(KERN_ERR "udf: udf_read_inode(ino %ld) failed !bh\n",
- inode->i_ino);
+ udf_err(inode->i_sb, "(ino %ld) failed !bh\n", inode->i_ino);
make_bad_inode(inode);
return;
}
if (ident != TAG_IDENT_FE && ident != TAG_IDENT_EFE &&
ident != TAG_IDENT_USE) {
- printk(KERN_ERR "udf: udf_read_inode(ino %ld) "
- "failed ident=%d\n", inode->i_ino, ident);
+ udf_err(inode->i_sb, "(ino %ld) failed ident=%d\n",
+ inode->i_ino, ident);
brelse(bh);
make_bad_inode(inode);
return;
@@ -1218,8 +1223,8 @@
}
brelse(ibh);
} else if (fe->icbTag.strategyType != cpu_to_le16(4)) {
- printk(KERN_ERR "udf: unsupported strategy type: %d\n",
- le16_to_cpu(fe->icbTag.strategyType));
+ udf_err(inode->i_sb, "unsupported strategy type: %d\n",
+ le16_to_cpu(fe->icbTag.strategyType));
brelse(bh);
make_bad_inode(inode);
return;
@@ -1236,6 +1241,7 @@
int offset;
struct udf_sb_info *sbi = UDF_SB(inode->i_sb);
struct udf_inode_info *iinfo = UDF_I(inode);
+ unsigned int link_count;
fe = (struct fileEntry *)bh->b_data;
efe = (struct extendedFileEntry *)bh->b_data;
@@ -1318,9 +1324,10 @@
inode->i_mode &= ~sbi->s_umask;
read_unlock(&sbi->s_cred_lock);
- inode->i_nlink = le16_to_cpu(fe->fileLinkCount);
- if (!inode->i_nlink)
- inode->i_nlink = 1;
+ link_count = le16_to_cpu(fe->fileLinkCount);
+ if (!link_count)
+ link_count = 1;
+ set_nlink(inode, link_count);
inode->i_size = le64_to_cpu(fe->informationLength);
iinfo->i_lenExtents = inode->i_size;
@@ -1413,9 +1420,8 @@
udf_debug("METADATA BITMAP FILE-----\n");
break;
default:
- printk(KERN_ERR "udf: udf_fill_inode(ino %ld) failed unknown "
- "file type=%d\n", inode->i_ino,
- fe->icbTag.fileType);
+ udf_err(inode->i_sb, "(ino %ld) failed unknown file type=%d\n",
+ inode->i_ino, fe->icbTag.fileType);
make_bad_inode(inode);
return;
}
@@ -1438,8 +1444,8 @@
iinfo->i_ext.i_data = kmalloc(size, GFP_KERNEL);
if (!iinfo->i_ext.i_data) {
- printk(KERN_ERR "udf:udf_alloc_i_data (ino %ld) "
- "no free memory\n", inode->i_ino);
+ udf_err(inode->i_sb, "(ino %ld) no free memory\n",
+ inode->i_ino);
return -ENOMEM;
}
@@ -1689,9 +1695,8 @@
if (do_sync) {
sync_dirty_buffer(bh);
if (buffer_write_io_error(bh)) {
- printk(KERN_WARNING "IO error syncing udf inode "
- "[%s:%08lx]\n", inode->i_sb->s_id,
- inode->i_ino);
+ udf_warn(inode->i_sb, "IO error syncing udf inode [%08lx]\n",
+ inode->i_ino);
err = -EIO;
}
}
@@ -1982,8 +1987,7 @@
*elen = le32_to_cpu(lad->extLength) & UDF_EXTENT_LENGTH_MASK;
break;
default:
- udf_debug("alloc_type = %d unsupported\n",
- iinfo->i_alloc_type);
+ udf_debug("alloc_type = %d unsupported\n", iinfo->i_alloc_type);
return -1;
}
diff --git a/fs/udf/lowlevel.c b/fs/udf/lowlevel.c
index 43e24a3..6583fe9 100644
--- a/fs/udf/lowlevel.c
+++ b/fs/udf/lowlevel.c
@@ -38,7 +38,7 @@
if (i == 0) {
udf_debug("XA disk: %s, vol_desc_start=%d\n",
- (ms_info.xa_flag ? "yes" : "no"), ms_info.addr.lba);
+ ms_info.xa_flag ? "yes" : "no", ms_info.addr.lba);
if (ms_info.xa_flag) /* necessary for a valid ms_info.addr */
vol_desc_start = ms_info.addr.lba;
} else {
diff --git a/fs/udf/misc.c b/fs/udf/misc.c
index 9215700..c175b4d 100644
--- a/fs/udf/misc.c
+++ b/fs/udf/misc.c
@@ -204,6 +204,7 @@
{
struct tag *tag_p;
struct buffer_head *bh = NULL;
+ u8 checksum;
/* Read the block */
if (block == 0xFFFFFFFF)
@@ -211,8 +212,8 @@
bh = udf_tread(sb, block);
if (!bh) {
- udf_debug("block=%d, location=%d: read failed\n",
- block, location);
+ udf_err(sb, "read failed, block=%u, location=%d\n",
+ block, location);
return NULL;
}
@@ -227,16 +228,18 @@
}
/* Verify the tag checksum */
- if (udf_tag_checksum(tag_p) != tag_p->tagChecksum) {
- printk(KERN_ERR "udf: tag checksum failed block %d\n", block);
+ checksum = udf_tag_checksum(tag_p);
+ if (checksum != tag_p->tagChecksum) {
+ udf_err(sb, "tag checksum failed, block %u: 0x%02x != 0x%02x\n",
+ block, checksum, tag_p->tagChecksum);
goto error_out;
}
/* Verify the tag version */
if (tag_p->descVersion != cpu_to_le16(0x0002U) &&
tag_p->descVersion != cpu_to_le16(0x0003U)) {
- udf_debug("tag version 0x%04x != 0x0002 || 0x0003 block %d\n",
- le16_to_cpu(tag_p->descVersion), block);
+ udf_err(sb, "tag version 0x%04x != 0x0002 || 0x0003, block %u\n",
+ le16_to_cpu(tag_p->descVersion), block);
goto error_out;
}
@@ -248,8 +251,8 @@
return bh;
udf_debug("Crc failure block %d: crc = %d, crclen = %d\n", block,
- le16_to_cpu(tag_p->descCRC), le16_to_cpu(tag_p->descCRCLength));
-
+ le16_to_cpu(tag_p->descCRC),
+ le16_to_cpu(tag_p->descCRCLength));
error_out:
brelse(bh);
return NULL;
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index f1dce84..4639e13 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -577,8 +577,7 @@
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink--;
- mark_inode_dirty(inode);
+ inode_dec_link_count(inode);
iput(inode);
return err;
}
@@ -618,8 +617,7 @@
init_special_inode(inode, mode, rdev);
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink--;
- mark_inode_dirty(inode);
+ inode_dec_link_count(inode);
iput(inode);
return err;
}
@@ -665,12 +663,11 @@
inode->i_fop = &udf_dir_operations;
fi = udf_add_entry(inode, NULL, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink--;
- mark_inode_dirty(inode);
+ inode_dec_link_count(inode);
iput(inode);
goto out;
}
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
cfi.icb.extLocation = cpu_to_lelb(dinfo->i_location);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
@@ -683,7 +680,7 @@
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
mark_inode_dirty(inode);
iput(inode);
goto out;
@@ -799,9 +796,8 @@
if (retval)
goto end_rmdir;
if (inode->i_nlink != 2)
- udf_warning(inode->i_sb, "udf_rmdir",
- "empty directory has nlink != 2 (%d)",
- inode->i_nlink);
+ udf_warn(inode->i_sb, "empty directory has nlink != 2 (%d)\n",
+ inode->i_nlink);
clear_nlink(inode);
inode->i_size = 0;
inode_dec_link_count(dir);
@@ -840,7 +836,7 @@
if (!inode->i_nlink) {
udf_debug("Deleting nonexistent file (%lu), %d\n",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
retval = udf_delete_entry(dir, fi, &fibh, &cfi);
if (retval)
diff --git a/fs/udf/partition.c b/fs/udf/partition.c
index a71090e..d6caf01 100644
--- a/fs/udf/partition.c
+++ b/fs/udf/partition.c
@@ -33,8 +33,8 @@
struct udf_sb_info *sbi = UDF_SB(sb);
struct udf_part_map *map;
if (partition >= sbi->s_partitions) {
- udf_debug("block=%d, partition=%d, offset=%d: "
- "invalid partition\n", block, partition, offset);
+ udf_debug("block=%d, partition=%d, offset=%d: invalid partition\n",
+ block, partition, offset);
return 0xFFFFFFFF;
}
map = &sbi->s_partmaps[partition];
@@ -60,8 +60,8 @@
vdata = &map->s_type_specific.s_virtual;
if (block > vdata->s_num_entries) {
- udf_debug("Trying to access block beyond end of VAT "
- "(%d max %d)\n", block, vdata->s_num_entries);
+ udf_debug("Trying to access block beyond end of VAT (%d max %d)\n",
+ block, vdata->s_num_entries);
return 0xFFFFFFFF;
}
@@ -321,9 +321,14 @@
/* We shouldn't mount such media... */
BUG_ON(!inode);
retblk = udf_try_read_meta(inode, block, partition, offset);
- if (retblk == 0xFFFFFFFF) {
- udf_warning(sb, __func__, "error reading from METADATA, "
- "trying to read from MIRROR");
+ if (retblk == 0xFFFFFFFF && mdata->s_metadata_fe) {
+ udf_warn(sb, "error reading from METADATA, trying to read from MIRROR\n");
+ if (!(mdata->s_flags & MF_MIRROR_FE_LOADED)) {
+ mdata->s_mirror_fe = udf_find_metadata_inode_efe(sb,
+ mdata->s_mirror_file_loc, map->s_partition_num);
+ mdata->s_flags |= MF_MIRROR_FE_LOADED;
+ }
+
inode = mdata->s_mirror_fe;
if (!inode)
return 0xFFFFFFFF;
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 7b27b06..e185253 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -75,8 +75,6 @@
#define UDF_DEFAULT_BLOCKSIZE 2048
-static char error_buf[1024];
-
/* These are the "meat" - everything else is stuffing */
static int udf_fill_super(struct super_block *, void *, int);
static void udf_put_super(struct super_block *);
@@ -92,8 +90,6 @@
static unsigned int udf_count_free(struct super_block *);
static int udf_statfs(struct dentry *, struct kstatfs *);
static int udf_show_options(struct seq_file *, struct vfsmount *);
-static void udf_error(struct super_block *sb, const char *function,
- const char *fmt, ...);
struct logicalVolIntegrityDescImpUse *udf_sb_lvidiu(struct udf_sb_info *sbi)
{
@@ -244,9 +240,8 @@
sbi->s_partmaps = kcalloc(count, sizeof(struct udf_part_map),
GFP_KERNEL);
if (!sbi->s_partmaps) {
- udf_error(sb, __func__,
- "Unable to allocate space for %d partition maps",
- count);
+ udf_err(sb, "Unable to allocate space for %d partition maps\n",
+ count);
sbi->s_partitions = 0;
return -ENOMEM;
}
@@ -550,8 +545,7 @@
uopt->dmode = option & 0777;
break;
default:
- printk(KERN_ERR "udf: bad mount option \"%s\" "
- "or missing value\n", p);
+ pr_err("bad mount option \"%s\" or missing value\n", p);
return 0;
}
}
@@ -645,20 +639,16 @@
udf_debug("ISO9660 Boot Record found\n");
break;
case 1:
- udf_debug("ISO9660 Primary Volume Descriptor "
- "found\n");
+ udf_debug("ISO9660 Primary Volume Descriptor found\n");
break;
case 2:
- udf_debug("ISO9660 Supplementary Volume "
- "Descriptor found\n");
+ udf_debug("ISO9660 Supplementary Volume Descriptor found\n");
break;
case 3:
- udf_debug("ISO9660 Volume Partition Descriptor "
- "found\n");
+ udf_debug("ISO9660 Volume Partition Descriptor found\n");
break;
case 255:
- udf_debug("ISO9660 Volume Descriptor Set "
- "Terminator found\n");
+ udf_debug("ISO9660 Volume Descriptor Set Terminator found\n");
break;
default:
udf_debug("ISO9660 VRS (%u) found\n",
@@ -809,8 +799,7 @@
pvoldesc->recordingDateAndTime)) {
#ifdef UDFFS_DEBUG
struct timestamp *ts = &pvoldesc->recordingDateAndTime;
- udf_debug("recording time %04u/%02u/%02u"
- " %02u:%02u (%x)\n",
+ udf_debug("recording time %04u/%02u/%02u %02u:%02u (%x)\n",
le16_to_cpu(ts->year), ts->month, ts->day, ts->hour,
ts->minute, le16_to_cpu(ts->typeAndTimezone));
#endif
@@ -821,7 +810,7 @@
strncpy(UDF_SB(sb)->s_volume_ident, outstr->u_name,
outstr->u_len > 31 ? 31 : outstr->u_len);
udf_debug("volIdent[] = '%s'\n",
- UDF_SB(sb)->s_volume_ident);
+ UDF_SB(sb)->s_volume_ident);
}
if (!udf_build_ustr(instr, pvoldesc->volSetIdent, 128))
@@ -837,64 +826,57 @@
return ret;
}
+struct inode *udf_find_metadata_inode_efe(struct super_block *sb,
+ u32 meta_file_loc, u32 partition_num)
+{
+ struct kernel_lb_addr addr;
+ struct inode *metadata_fe;
+
+ addr.logicalBlockNum = meta_file_loc;
+ addr.partitionReferenceNum = partition_num;
+
+ metadata_fe = udf_iget(sb, &addr);
+
+ if (metadata_fe == NULL)
+ udf_warn(sb, "metadata inode efe not found\n");
+ else if (UDF_I(metadata_fe)->i_alloc_type != ICBTAG_FLAG_AD_SHORT) {
+ udf_warn(sb, "metadata inode efe does not have short allocation descriptors!\n");
+ iput(metadata_fe);
+ metadata_fe = NULL;
+ }
+
+ return metadata_fe;
+}
+
static int udf_load_metadata_files(struct super_block *sb, int partition)
{
struct udf_sb_info *sbi = UDF_SB(sb);
struct udf_part_map *map;
struct udf_meta_data *mdata;
struct kernel_lb_addr addr;
- int fe_error = 0;
map = &sbi->s_partmaps[partition];
mdata = &map->s_type_specific.s_metadata;
/* metadata address */
- addr.logicalBlockNum = mdata->s_meta_file_loc;
- addr.partitionReferenceNum = map->s_partition_num;
-
udf_debug("Metadata file location: block = %d part = %d\n",
- addr.logicalBlockNum, addr.partitionReferenceNum);
+ mdata->s_meta_file_loc, map->s_partition_num);
- mdata->s_metadata_fe = udf_iget(sb, &addr);
+ mdata->s_metadata_fe = udf_find_metadata_inode_efe(sb,
+ mdata->s_meta_file_loc, map->s_partition_num);
if (mdata->s_metadata_fe == NULL) {
- udf_warning(sb, __func__, "metadata inode efe not found, "
- "will try mirror inode.");
- fe_error = 1;
- } else if (UDF_I(mdata->s_metadata_fe)->i_alloc_type !=
- ICBTAG_FLAG_AD_SHORT) {
- udf_warning(sb, __func__, "metadata inode efe does not have "
- "short allocation descriptors!");
- fe_error = 1;
- iput(mdata->s_metadata_fe);
- mdata->s_metadata_fe = NULL;
- }
+ /* mirror file entry */
+ udf_debug("Mirror metadata file location: block = %d part = %d\n",
+ mdata->s_mirror_file_loc, map->s_partition_num);
- /* mirror file entry */
- addr.logicalBlockNum = mdata->s_mirror_file_loc;
- addr.partitionReferenceNum = map->s_partition_num;
+ mdata->s_mirror_fe = udf_find_metadata_inode_efe(sb,
+ mdata->s_mirror_file_loc, map->s_partition_num);
- udf_debug("Mirror metadata file location: block = %d part = %d\n",
- addr.logicalBlockNum, addr.partitionReferenceNum);
-
- mdata->s_mirror_fe = udf_iget(sb, &addr);
-
- if (mdata->s_mirror_fe == NULL) {
- if (fe_error) {
- udf_error(sb, __func__, "mirror inode efe not found "
- "and metadata inode is missing too, exiting...");
+ if (mdata->s_mirror_fe == NULL) {
+ udf_err(sb, "Both metadata and mirror metadata inode efe can not found\n");
goto error_exit;
- } else
- udf_warning(sb, __func__, "mirror inode efe not found,"
- " but metadata inode is OK");
- } else if (UDF_I(mdata->s_mirror_fe)->i_alloc_type !=
- ICBTAG_FLAG_AD_SHORT) {
- udf_warning(sb, __func__, "mirror inode efe does not have "
- "short allocation descriptors!");
- iput(mdata->s_mirror_fe);
- mdata->s_mirror_fe = NULL;
- if (fe_error)
- goto error_exit;
+ }
}
/*
@@ -907,18 +889,15 @@
addr.partitionReferenceNum = map->s_partition_num;
udf_debug("Bitmap file location: block = %d part = %d\n",
- addr.logicalBlockNum, addr.partitionReferenceNum);
+ addr.logicalBlockNum, addr.partitionReferenceNum);
mdata->s_bitmap_fe = udf_iget(sb, &addr);
if (mdata->s_bitmap_fe == NULL) {
if (sb->s_flags & MS_RDONLY)
- udf_warning(sb, __func__, "bitmap inode efe "
- "not found but it's ok since the disc"
- " is mounted read-only");
+ udf_warn(sb, "bitmap inode efe not found but it's ok since the disc is mounted read-only\n");
else {
- udf_error(sb, __func__, "bitmap inode efe not "
- "found and attempted read-write mount");
+ udf_err(sb, "bitmap inode efe not found and attempted read-write mount\n");
goto error_exit;
}
}
@@ -971,9 +950,8 @@
bitmap = vzalloc(size); /* TODO: get rid of vzalloc */
if (bitmap == NULL) {
- udf_error(sb, __func__,
- "Unable to allocate space for bitmap "
- "and %d buffer_head pointers", nr_groups);
+ udf_err(sb, "Unable to allocate space for bitmap and %d buffer_head pointers\n",
+ nr_groups);
return NULL;
}
@@ -1003,10 +981,9 @@
if (p->accessType == cpu_to_le32(PD_ACCESS_TYPE_OVERWRITABLE))
map->s_partition_flags |= UDF_PART_FLAG_OVERWRITABLE;
- udf_debug("Partition (%d type %x) starts at physical %d, "
- "block length %d\n", p_index,
- map->s_partition_type, map->s_partition_root,
- map->s_partition_len);
+ udf_debug("Partition (%d type %x) starts at physical %d, block length %d\n",
+ p_index, map->s_partition_type,
+ map->s_partition_root, map->s_partition_len);
if (strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR02) &&
strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR03))
@@ -1023,12 +1000,12 @@
map->s_uspace.s_table = udf_iget(sb, &loc);
if (!map->s_uspace.s_table) {
udf_debug("cannot load unallocSpaceTable (part %d)\n",
- p_index);
+ p_index);
return 1;
}
map->s_partition_flags |= UDF_PART_FLAG_UNALLOC_TABLE;
udf_debug("unallocSpaceTable (part %d) @ %ld\n",
- p_index, map->s_uspace.s_table->i_ino);
+ p_index, map->s_uspace.s_table->i_ino);
}
if (phd->unallocSpaceBitmap.extLength) {
@@ -1041,8 +1018,8 @@
bitmap->s_extPosition = le32_to_cpu(
phd->unallocSpaceBitmap.extPosition);
map->s_partition_flags |= UDF_PART_FLAG_UNALLOC_BITMAP;
- udf_debug("unallocSpaceBitmap (part %d) @ %d\n", p_index,
- bitmap->s_extPosition);
+ udf_debug("unallocSpaceBitmap (part %d) @ %d\n",
+ p_index, bitmap->s_extPosition);
}
if (phd->partitionIntegrityTable.extLength)
@@ -1058,13 +1035,13 @@
map->s_fspace.s_table = udf_iget(sb, &loc);
if (!map->s_fspace.s_table) {
udf_debug("cannot load freedSpaceTable (part %d)\n",
- p_index);
+ p_index);
return 1;
}
map->s_partition_flags |= UDF_PART_FLAG_FREED_TABLE;
udf_debug("freedSpaceTable (part %d) @ %ld\n",
- p_index, map->s_fspace.s_table->i_ino);
+ p_index, map->s_fspace.s_table->i_ino);
}
if (phd->freedSpaceBitmap.extLength) {
@@ -1077,8 +1054,8 @@
bitmap->s_extPosition = le32_to_cpu(
phd->freedSpaceBitmap.extPosition);
map->s_partition_flags |= UDF_PART_FLAG_FREED_BITMAP;
- udf_debug("freedSpaceBitmap (part %d) @ %d\n", p_index,
- bitmap->s_extPosition);
+ udf_debug("freedSpaceBitmap (part %d) @ %d\n",
+ p_index, bitmap->s_extPosition);
}
return 0;
}
@@ -1118,11 +1095,9 @@
udf_find_vat_block(sb, p_index, type1_index, sbi->s_last_block);
if (!sbi->s_vat_inode &&
sbi->s_last_block != blocks - 1) {
- printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the"
- " last recorded block (%lu), retrying with the last "
- "block of the device (%lu).\n",
- (unsigned long)sbi->s_last_block,
- (unsigned long)blocks - 1);
+ pr_notice("Failed to read VAT inode from the last recorded block (%lu), retrying with the last block of the device (%lu).\n",
+ (unsigned long)sbi->s_last_block,
+ (unsigned long)blocks - 1);
udf_find_vat_block(sb, p_index, type1_index, blocks - 1);
}
if (!sbi->s_vat_inode)
@@ -1220,8 +1195,8 @@
if (map->s_partition_type == UDF_METADATA_MAP25) {
ret = udf_load_metadata_files(sb, i);
if (ret) {
- printk(KERN_ERR "UDF-fs: error loading MetaData "
- "partition map %d\n", i);
+ udf_err(sb, "error loading MetaData partition map %d\n",
+ i);
goto out_bh;
}
} else {
@@ -1234,9 +1209,7 @@
* overwrite blocks instead of relocating them).
*/
sb->s_flags |= MS_RDONLY;
- printk(KERN_NOTICE "UDF-fs: Filesystem marked read-only "
- "because writing to pseudooverwrite partition is "
- "not implemented.\n");
+ pr_notice("Filesystem marked read-only because writing to pseudooverwrite partition is not implemented\n");
}
out_bh:
/* In case loading failed, we handle cleanup in udf_fill_super */
@@ -1344,9 +1317,8 @@
struct metadataPartitionMap *mdm =
(struct metadataPartitionMap *)
&(lvd->partitionMaps[offset]);
- udf_debug("Parsing Logical vol part %d "
- "type %d id=%s\n", i, type,
- UDF_ID_METADATA);
+ udf_debug("Parsing Logical vol part %d type %d id=%s\n",
+ i, type, UDF_ID_METADATA);
map->s_partition_type = UDF_METADATA_MAP25;
map->s_partition_func = udf_get_pblock_meta25;
@@ -1361,25 +1333,24 @@
le32_to_cpu(mdm->allocUnitSize);
mdata->s_align_unit_size =
le16_to_cpu(mdm->alignUnitSize);
- mdata->s_dup_md_flag =
- mdm->flags & 0x01;
+ if (mdm->flags & 0x01)
+ mdata->s_flags |= MF_DUPLICATE_MD;
udf_debug("Metadata Ident suffix=0x%x\n",
- (le16_to_cpu(
- ((__le16 *)
- mdm->partIdent.identSuffix)[0])));
+ le16_to_cpu(*(__le16 *)
+ mdm->partIdent.identSuffix));
udf_debug("Metadata part num=%d\n",
- le16_to_cpu(mdm->partitionNum));
+ le16_to_cpu(mdm->partitionNum));
udf_debug("Metadata part alloc unit size=%d\n",
- le32_to_cpu(mdm->allocUnitSize));
+ le32_to_cpu(mdm->allocUnitSize));
udf_debug("Metadata file loc=%d\n",
- le32_to_cpu(mdm->metadataFileLoc));
+ le32_to_cpu(mdm->metadataFileLoc));
udf_debug("Mirror file loc=%d\n",
- le32_to_cpu(mdm->metadataMirrorFileLoc));
+ le32_to_cpu(mdm->metadataMirrorFileLoc));
udf_debug("Bitmap file loc=%d\n",
- le32_to_cpu(mdm->metadataBitmapFileLoc));
- udf_debug("Duplicate Flag: %d %d\n",
- mdata->s_dup_md_flag, mdm->flags);
+ le32_to_cpu(mdm->metadataBitmapFileLoc));
+ udf_debug("Flags: %d %d\n",
+ mdata->s_flags, mdm->flags);
} else {
udf_debug("Unknown ident: %s\n",
upm2->partIdent.ident);
@@ -1389,16 +1360,15 @@
map->s_partition_num = le16_to_cpu(upm2->partitionNum);
}
udf_debug("Partition (%d:%d) type %d on volume %d\n",
- i, map->s_partition_num, type,
- map->s_volumeseqnum);
+ i, map->s_partition_num, type, map->s_volumeseqnum);
}
if (fileset) {
struct long_ad *la = (struct long_ad *)&(lvd->logicalVolContentsUse[0]);
*fileset = lelb_to_cpu(la->extLocation);
- udf_debug("FileSet found in LogicalVolDesc at block=%d, "
- "partition=%d\n", fileset->logicalBlockNum,
+ udf_debug("FileSet found in LogicalVolDesc at block=%d, partition=%d\n",
+ fileset->logicalBlockNum,
fileset->partitionReferenceNum);
}
if (lvd->integritySeqExt.extLength)
@@ -1478,9 +1448,9 @@
bh = udf_read_tagged(sb, block, block, &ident);
if (!bh) {
- printk(KERN_ERR "udf: Block %Lu of volume descriptor "
- "sequence is corrupted or we could not read "
- "it.\n", (unsigned long long)block);
+ udf_err(sb,
+ "Block %llu of volume descriptor sequence is corrupted or we could not read it\n",
+ (unsigned long long)block);
return 1;
}
@@ -1553,7 +1523,7 @@
* in a suitable order
*/
if (!vds[VDS_POS_PRIMARY_VOL_DESC].block) {
- printk(KERN_ERR "udf: Primary Volume Descriptor not found!\n");
+ udf_err(sb, "Primary Volume Descriptor not found!\n");
return 1;
}
if (udf_load_pvoldesc(sb, vds[VDS_POS_PRIMARY_VOL_DESC].block))
@@ -1740,7 +1710,7 @@
if (!sb_set_blocksize(sb, uopt->blocksize)) {
if (!silent)
- printk(KERN_WARNING "UDF-fs: Bad block size\n");
+ udf_warn(sb, "Bad block size\n");
return 0;
}
sbi->s_last_block = uopt->lastblock;
@@ -1749,12 +1719,11 @@
nsr_off = udf_check_vsd(sb);
if (!nsr_off) {
if (!silent)
- printk(KERN_WARNING "UDF-fs: No VRS found\n");
+ udf_warn(sb, "No VRS found\n");
return 0;
}
if (nsr_off == -1)
- udf_debug("Failed to read byte 32768. Assuming open "
- "disc. Skipping validity check\n");
+ udf_debug("Failed to read byte 32768. Assuming open disc. Skipping validity check\n");
if (!sbi->s_last_block)
sbi->s_last_block = udf_get_last_block(sb);
} else {
@@ -1765,7 +1734,7 @@
sbi->s_anchor = uopt->anchor;
if (!udf_find_anchor(sb, fileset)) {
if (!silent)
- printk(KERN_WARNING "UDF-fs: No anchor found\n");
+ udf_warn(sb, "No anchor found\n");
return 0;
}
return 1;
@@ -1937,8 +1906,7 @@
if (uopt.flags & (1 << UDF_FLAG_UTF8) &&
uopt.flags & (1 << UDF_FLAG_NLS_MAP)) {
- udf_error(sb, "udf_read_super",
- "utf8 cannot be combined with iocharset\n");
+ udf_err(sb, "utf8 cannot be combined with iocharset\n");
goto error_out;
}
#ifdef CONFIG_UDF_NLS
@@ -1987,15 +1955,14 @@
ret = udf_load_vrs(sb, &uopt, silent, &fileset);
if (!ret && uopt.blocksize != UDF_DEFAULT_BLOCKSIZE) {
if (!silent)
- printk(KERN_NOTICE
- "UDF-fs: Rescanning with blocksize "
- "%d\n", UDF_DEFAULT_BLOCKSIZE);
+ pr_notice("Rescanning with blocksize %d\n",
+ UDF_DEFAULT_BLOCKSIZE);
uopt.blocksize = UDF_DEFAULT_BLOCKSIZE;
ret = udf_load_vrs(sb, &uopt, silent, &fileset);
}
}
if (!ret) {
- printk(KERN_WARNING "UDF-fs: No partition found (1)\n");
+ udf_warn(sb, "No partition found (1)\n");
goto error_out;
}
@@ -2010,10 +1977,9 @@
le16_to_cpu(lvidiu->maxUDFWriteRev); */
if (minUDFReadRev > UDF_MAX_READ_VERSION) {
- printk(KERN_ERR "UDF-fs: minUDFReadRev=%x "
- "(max is %x)\n",
- le16_to_cpu(lvidiu->minUDFReadRev),
- UDF_MAX_READ_VERSION);
+ udf_err(sb, "minUDFReadRev=%x (max is %x)\n",
+ le16_to_cpu(lvidiu->minUDFReadRev),
+ UDF_MAX_READ_VERSION);
goto error_out;
} else if (minUDFWriteRev > UDF_MAX_WRITE_VERSION)
sb->s_flags |= MS_RDONLY;
@@ -2027,28 +1993,27 @@
}
if (!sbi->s_partitions) {
- printk(KERN_WARNING "UDF-fs: No partition found (2)\n");
+ udf_warn(sb, "No partition found (2)\n");
goto error_out;
}
if (sbi->s_partmaps[sbi->s_partition].s_partition_flags &
UDF_PART_FLAG_READ_ONLY) {
- printk(KERN_NOTICE "UDF-fs: Partition marked readonly; "
- "forcing readonly mount\n");
+ pr_notice("Partition marked readonly; forcing readonly mount\n");
sb->s_flags |= MS_RDONLY;
}
if (udf_find_fileset(sb, &fileset, &rootdir)) {
- printk(KERN_WARNING "UDF-fs: No fileset found\n");
+ udf_warn(sb, "No fileset found\n");
goto error_out;
}
if (!silent) {
struct timestamp ts;
udf_time_to_disk_stamp(&ts, sbi->s_record_time);
- udf_info("UDF: Mounting volume '%s', "
- "timestamp %04u/%02u/%02u %02u:%02u (%x)\n",
- sbi->s_volume_ident, le16_to_cpu(ts.year), ts.month, ts.day,
+ udf_info("Mounting volume '%s', timestamp %04u/%02u/%02u %02u:%02u (%x)\n",
+ sbi->s_volume_ident,
+ le16_to_cpu(ts.year), ts.month, ts.day,
ts.hour, ts.minute, le16_to_cpu(ts.typeAndTimezone));
}
if (!(sb->s_flags & MS_RDONLY))
@@ -2059,8 +2024,7 @@
/* perhaps it's not extensible enough, but for now ... */
inode = udf_iget(sb, &rootdir);
if (!inode) {
- printk(KERN_ERR "UDF-fs: Error in udf_iget, block=%d, "
- "partition=%d\n",
+ udf_err(sb, "Error in udf_iget, block=%d, partition=%d\n",
rootdir.logicalBlockNum, rootdir.partitionReferenceNum);
goto error_out;
}
@@ -2068,7 +2032,7 @@
/* Allocate a dentry for the root inode */
sb->s_root = d_alloc_root(inode);
if (!sb->s_root) {
- printk(KERN_ERR "UDF-fs: Couldn't allocate root dentry\n");
+ udf_err(sb, "Couldn't allocate root dentry\n");
iput(inode);
goto error_out;
}
@@ -2096,32 +2060,40 @@
return -EINVAL;
}
-static void udf_error(struct super_block *sb, const char *function,
- const char *fmt, ...)
+void _udf_err(struct super_block *sb, const char *function,
+ const char *fmt, ...)
{
+ struct va_format vaf;
va_list args;
- if (!(sb->s_flags & MS_RDONLY)) {
- /* mark sb error */
+ /* mark sb error */
+ if (!(sb->s_flags & MS_RDONLY))
sb->s_dirt = 1;
- }
+
va_start(args, fmt);
- vsnprintf(error_buf, sizeof(error_buf), fmt, args);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ pr_err("error (device %s): %s: %pV", sb->s_id, function, &vaf);
+
va_end(args);
- printk(KERN_CRIT "UDF-fs error (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
}
-void udf_warning(struct super_block *sb, const char *function,
- const char *fmt, ...)
+void _udf_warn(struct super_block *sb, const char *function,
+ const char *fmt, ...)
{
+ struct va_format vaf;
va_list args;
va_start(args, fmt);
- vsnprintf(error_buf, sizeof(error_buf), fmt, args);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ pr_warn("warning (device %s): %s: %pV", sb->s_id, function, &vaf);
+
va_end(args);
- printk(KERN_WARNING "UDF-fs warning (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
}
static void udf_put_super(struct super_block *sb)
@@ -2213,11 +2185,11 @@
bh = udf_read_ptagged(sb, &loc, 0, &ident);
if (!bh) {
- printk(KERN_ERR "udf: udf_count_free failed\n");
+ udf_err(sb, "udf_count_free failed\n");
goto out;
} else if (ident != TAG_IDENT_SBD) {
brelse(bh);
- printk(KERN_ERR "udf: udf_count_free failed\n");
+ udf_err(sb, "udf_count_free failed\n");
goto out;
}
diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c
index 8424308..4b98fee 100644
--- a/fs/udf/truncate.c
+++ b/fs/udf/truncate.c
@@ -95,23 +95,21 @@
lbcount += elen;
if (lbcount > inode->i_size) {
if (lbcount - inode->i_size >= inode->i_sb->s_blocksize)
- printk(KERN_WARNING
- "udf_truncate_tail_extent(): Too long "
- "extent after EOF in inode %u: i_size: "
- "%Ld lbcount: %Ld extent %u+%u\n",
- (unsigned)inode->i_ino,
- (long long)inode->i_size,
- (long long)lbcount,
- (unsigned)eloc.logicalBlockNum,
- (unsigned)elen);
+ udf_warn(inode->i_sb,
+ "Too long extent after EOF in inode %u: i_size: %lld lbcount: %lld extent %u+%u\n",
+ (unsigned)inode->i_ino,
+ (long long)inode->i_size,
+ (long long)lbcount,
+ (unsigned)eloc.logicalBlockNum,
+ (unsigned)elen);
nelen = elen - (lbcount - inode->i_size);
epos.offset -= adsize;
extent_trunc(inode, &epos, &eloc, etype, elen, nelen);
epos.offset += adsize;
if (udf_next_aext(inode, &epos, &eloc, &elen, 1) != -1)
- printk(KERN_ERR "udf_truncate_tail_extent(): "
- "Extent after EOF in inode %u.\n",
- (unsigned)inode->i_ino);
+ udf_err(inode->i_sb,
+ "Extent after EOF in inode %u\n",
+ (unsigned)inode->i_ino);
break;
}
}
diff --git a/fs/udf/udf_sb.h b/fs/udf/udf_sb.h
index 4858c19..5142a82 100644
--- a/fs/udf/udf_sb.h
+++ b/fs/udf/udf_sb.h
@@ -54,13 +54,16 @@
#pragma pack(1) /* XXX(hch): Why? This file just defines in-core structures */
+#define MF_DUPLICATE_MD 0x01
+#define MF_MIRROR_FE_LOADED 0x02
+
struct udf_meta_data {
__u32 s_meta_file_loc;
__u32 s_mirror_file_loc;
__u32 s_bitmap_file_loc;
__u32 s_alloc_unit_size;
__u16 s_align_unit_size;
- __u8 s_dup_md_flag;
+ int s_flags;
struct inode *s_metadata_fe;
struct inode *s_mirror_fe;
struct inode *s_bitmap_fe;
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index dbd52d4b..f34e6fc 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -1,6 +1,8 @@
#ifndef __UDF_DECL_H
#define __UDF_DECL_H
+#define pr_fmt(fmt) "UDF-fs: " fmt
+
#include "ecma_167.h"
#include "osta_udf.h"
@@ -16,23 +18,30 @@
#define UDF_PREALLOCATE
#define UDF_DEFAULT_PREALLOC_BLOCKS 8
+extern __printf(3, 4) void _udf_err(struct super_block *sb,
+ const char *function, const char *fmt, ...);
+#define udf_err(sb, fmt, ...) \
+ _udf_err(sb, __func__, fmt, ##__VA_ARGS__)
+
+extern __printf(3, 4) void _udf_warn(struct super_block *sb,
+ const char *function, const char *fmt, ...);
+#define udf_warn(sb, fmt, ...) \
+ _udf_warn(sb, __func__, fmt, ##__VA_ARGS__)
+
+#define udf_info(fmt, ...) \
+ pr_info("INFO " fmt, ##__VA_ARGS__)
+
#undef UDFFS_DEBUG
#ifdef UDFFS_DEBUG
-#define udf_debug(f, a...) \
-do { \
- printk(KERN_DEBUG "UDF-fs DEBUG %s:%d:%s: ", \
- __FILE__, __LINE__, __func__); \
- printk(f, ##a); \
-} while (0)
+#define udf_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt("%s:%d:%s: " fmt), \
+ __FILE__, __LINE__, __func__, ##__VA_ARGS__)
#else
-#define udf_debug(f, a...) /**/
+#define udf_debug(fmt, ...) \
+ no_printk(fmt, ##__VA_ARGS__)
#endif
-#define udf_info(f, a...) \
- printk(KERN_INFO "UDF-fs INFO " f, ##a);
-
-
#define udf_fixed_to_variable(x) ( ( ( (x) >> 5 ) * 39 ) + ( (x) & 0x0000001F ) )
#define udf_variable_to_fixed(x) ( ( ( (x) / 39 ) << 5 ) + ( (x) % 39 ) )
@@ -112,8 +121,6 @@
/* super.c */
-__attribute__((format(printf, 3, 4)))
-extern void udf_warning(struct super_block *, const char *, const char *, ...);
static inline void udf_updated_lvid(struct super_block *sb)
{
struct buffer_head *bh = UDF_SB(sb)->s_lvid_bh;
@@ -126,6 +133,8 @@
UDF_SB(sb)->s_lvid_dirty = 1;
}
extern u64 lvid_get_unique_id(struct super_block *sb);
+struct inode *udf_find_metadata_inode_efe(struct super_block *sb,
+ u32 meta_file_loc, u32 partition_num);
/* namei.c */
extern int udf_write_fi(struct inode *inode, struct fileIdentDesc *,
diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c
index b8c828c..1f11483 100644
--- a/fs/udf/udftime.c
+++ b/fs/udf/udftime.c
@@ -34,9 +34,10 @@
* http://www.boulder.nist.gov/timefreq/pubs/bulletin/leapsecond.htm
*/
+#include "udfdecl.h"
+
#include <linux/types.h>
#include <linux/kernel.h>
-#include "udfdecl.h"
#define EPOCH_YEAR 1970
diff --git a/fs/udf/unicode.c b/fs/udf/unicode.c
index d03a90b..44b815e 100644
--- a/fs/udf/unicode.c
+++ b/fs/udf/unicode.c
@@ -114,7 +114,7 @@
cmp_id = ocu_i->u_cmpID;
if (cmp_id != 8 && cmp_id != 16) {
memset(utf_o, 0, sizeof(struct ustr));
- printk(KERN_ERR "udf: unknown compression code (%d) stri=%s\n",
+ pr_err("unknown compression code (%d) stri=%s\n",
cmp_id, ocu_i->u_name);
return 0;
}
@@ -242,7 +242,7 @@
if (utf_cnt) {
error_out:
ocu[++u_len] = '?';
- printk(KERN_DEBUG "udf: bad UTF-8 character\n");
+ printk(KERN_DEBUG pr_fmt("bad UTF-8 character\n"));
}
ocu[length - 1] = (uint8_t)u_len + 1;
@@ -267,7 +267,7 @@
cmp_id = ocu_i->u_cmpID;
if (cmp_id != 8 && cmp_id != 16) {
memset(utf_o, 0, sizeof(struct ustr));
- printk(KERN_ERR "udf: unknown compression code (%d) stri=%s\n",
+ pr_err("unknown compression code (%d) stri=%s\n",
cmp_id, ocu_i->u_name);
return 0;
}
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 2eabf04..78a4c70 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -341,7 +341,7 @@
fail_remove_inode:
unlock_super(sb);
- inode->i_nlink = 0;
+ clear_nlink(inode);
iput(inode);
UFSD("EXIT (FAILED): err %d\n", err);
return ERR_PTR(err);
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index b4d791a..879b134 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -589,7 +589,7 @@
* Copy data to the in-core inode.
*/
inode->i_mode = mode = fs16_to_cpu(sb, ufs_inode->ui_mode);
- inode->i_nlink = fs16_to_cpu(sb, ufs_inode->ui_nlink);
+ set_nlink(inode, fs16_to_cpu(sb, ufs_inode->ui_nlink));
if (inode->i_nlink == 0) {
ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino);
return -1;
@@ -637,7 +637,7 @@
* Copy data to the in-core inode.
*/
inode->i_mode = mode = fs16_to_cpu(sb, ufs2_inode->ui_mode);
- inode->i_nlink = fs16_to_cpu(sb, ufs2_inode->ui_nlink);
+ set_nlink(inode, fs16_to_cpu(sb, ufs2_inode->ui_nlink));
if (inode->i_nlink == 0) {
ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino);
return -1;
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 5be2755..c26f2bce 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -117,9 +117,12 @@
extern const struct file_operations ufs_dir_operations;
/* super.c */
-extern void ufs_warning (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
-extern void ufs_error (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
-extern void ufs_panic (struct super_block *, const char *, const char *, ...) __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void ufs_warning(struct super_block *, const char *, const char *, ...);
+extern __printf(3, 4)
+void ufs_error(struct super_block *, const char *, const char *, ...);
+extern __printf(3, 4)
+void ufs_panic(struct super_block *, const char *, const char *, ...);
/* symlink.c */
extern const struct inode_operations ufs_fast_symlink_inode_operations;
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index bdd9cb5..ce84ffd 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -452,7 +452,7 @@
if (error)
return error;
ASSERT(!xfs_buf_geterror(bp));
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_AGFL, XFS_AGFL_REF);
+ xfs_buf_set_ref(bp, XFS_AGFL_REF);
*bpp = bp;
return 0;
}
@@ -2139,7 +2139,7 @@
xfs_trans_brelse(tp, *bpp);
return XFS_ERROR(EFSCORRUPTED);
}
- XFS_BUF_SET_VTYPE_REF(*bpp, B_FS_AGF, XFS_AGF_REF);
+ xfs_buf_set_ref(*bpp, XFS_AGF_REF);
return 0;
}
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 8c37dde..33b1331 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -38,40 +38,6 @@
#include <linux/pagevec.h>
#include <linux/writeback.h>
-
-/*
- * Prime number of hash buckets since address is used as the key.
- */
-#define NVSYNC 37
-#define to_ioend_wq(v) (&xfs_ioend_wq[((unsigned long)v) % NVSYNC])
-static wait_queue_head_t xfs_ioend_wq[NVSYNC];
-
-void __init
-xfs_ioend_init(void)
-{
- int i;
-
- for (i = 0; i < NVSYNC; i++)
- init_waitqueue_head(&xfs_ioend_wq[i]);
-}
-
-void
-xfs_ioend_wait(
- xfs_inode_t *ip)
-{
- wait_queue_head_t *wq = to_ioend_wq(ip);
-
- wait_event(*wq, (atomic_read(&ip->i_iocount) == 0));
-}
-
-STATIC void
-xfs_ioend_wake(
- xfs_inode_t *ip)
-{
- if (atomic_dec_and_test(&ip->i_iocount))
- wake_up(to_ioend_wq(ip));
-}
-
void
xfs_count_page_state(
struct page *page,
@@ -115,25 +81,20 @@
xfs_ioend_t *ioend)
{
struct buffer_head *bh, *next;
- struct xfs_inode *ip = XFS_I(ioend->io_inode);
for (bh = ioend->io_buffer_head; bh; bh = next) {
next = bh->b_private;
bh->b_end_io(bh, !ioend->io_error);
}
- /*
- * Volume managers supporting multiple paths can send back ENODEV
- * when the final path disappears. In this case continuing to fill
- * the page cache with dirty data which cannot be written out is
- * evil, so prevent that.
- */
- if (unlikely(ioend->io_error == -ENODEV)) {
- xfs_do_force_shutdown(ip->i_mount, SHUTDOWN_DEVICE_REQ,
- __FILE__, __LINE__);
+ if (ioend->io_iocb) {
+ if (ioend->io_isasync) {
+ aio_complete(ioend->io_iocb, ioend->io_error ?
+ ioend->io_error : ioend->io_result, 0);
+ }
+ inode_dio_done(ioend->io_inode);
}
- xfs_ioend_wake(ip);
mempool_free(ioend, xfs_ioend_pool);
}
@@ -156,6 +117,15 @@
}
/*
+ * Fast and loose check if this write could update the on-disk inode size.
+ */
+static inline bool xfs_ioend_is_append(struct xfs_ioend *ioend)
+{
+ return ioend->io_offset + ioend->io_size >
+ XFS_I(ioend->io_inode)->i_d.di_size;
+}
+
+/*
* Update on-disk file size now that data has been written to disk. The
* current in-memory file size is i_size. If a write is beyond eof i_new_size
* will be the intended file size until i_size is updated. If this write does
@@ -173,9 +143,6 @@
xfs_inode_t *ip = XFS_I(ioend->io_inode);
xfs_fsize_t isize;
- if (unlikely(ioend->io_error))
- return 0;
-
if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL))
return EAGAIN;
@@ -192,6 +159,9 @@
/*
* Schedule IO completion handling on the final put of an ioend.
+ *
+ * If there is no work to do we might as well call it a day and free the
+ * ioend right now.
*/
STATIC void
xfs_finish_ioend(
@@ -200,8 +170,10 @@
if (atomic_dec_and_test(&ioend->io_remaining)) {
if (ioend->io_type == IO_UNWRITTEN)
queue_work(xfsconvertd_workqueue, &ioend->io_work);
- else
+ else if (xfs_ioend_is_append(ioend))
queue_work(xfsdatad_workqueue, &ioend->io_work);
+ else
+ xfs_destroy_ioend(ioend);
}
}
@@ -216,17 +188,24 @@
struct xfs_inode *ip = XFS_I(ioend->io_inode);
int error = 0;
+ if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ error = -EIO;
+ goto done;
+ }
+ if (ioend->io_error)
+ goto done;
+
/*
* For unwritten extents we need to issue transactions to convert a
* range to normal written extens after the data I/O has finished.
*/
- if (ioend->io_type == IO_UNWRITTEN &&
- likely(!ioend->io_error && !XFS_FORCED_SHUTDOWN(ip->i_mount))) {
-
+ if (ioend->io_type == IO_UNWRITTEN) {
error = xfs_iomap_write_unwritten(ip, ioend->io_offset,
ioend->io_size);
- if (error)
- ioend->io_error = error;
+ if (error) {
+ ioend->io_error = -error;
+ goto done;
+ }
}
/*
@@ -236,6 +215,7 @@
error = xfs_setfilesize(ioend);
ASSERT(!error || error == EAGAIN);
+done:
/*
* If we didn't complete processing of the ioend, requeue it to the
* tail of the workqueue for another attempt later. Otherwise destroy
@@ -247,8 +227,6 @@
/* ensure we don't spin on blocked ioends */
delay(1);
} else {
- if (ioend->io_iocb)
- aio_complete(ioend->io_iocb, ioend->io_result, 0);
xfs_destroy_ioend(ioend);
}
}
@@ -285,13 +263,13 @@
* all the I/O from calling the completion routine too early.
*/
atomic_set(&ioend->io_remaining, 1);
+ ioend->io_isasync = 0;
ioend->io_error = 0;
ioend->io_list = NULL;
ioend->io_type = type;
ioend->io_inode = inode;
ioend->io_buffer_head = NULL;
ioend->io_buffer_tail = NULL;
- atomic_inc(&XFS_I(ioend->io_inode)->i_iocount);
ioend->io_offset = 0;
ioend->io_size = 0;
ioend->io_iocb = NULL;
@@ -337,8 +315,8 @@
count = mp->m_maxioffset - offset;
end_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
- error = xfs_bmapi(NULL, ip, offset_fsb, end_fsb - offset_fsb,
- bmapi_flags, NULL, 0, imap, &nimaps, NULL);
+ error = xfs_bmapi_read(ip, offset_fsb, end_fsb - offset_fsb,
+ imap, &nimaps, bmapi_flags);
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (error)
@@ -551,7 +529,6 @@
unlock_buffer(bh);
} while ((bh = next_bh) != NULL);
- xfs_ioend_wake(XFS_I(ioend->io_inode));
mempool_free(ioend, xfs_ioend_pool);
} while ((ioend = next) != NULL);
}
@@ -925,11 +902,11 @@
* random callers for direct reclaim or memcg reclaim. We explicitly
* allow reclaim from kswapd as the stack usage there is relatively low.
*
- * This should really be done by the core VM, but until that happens
- * filesystems like XFS, btrfs and ext4 have to take care of this
- * by themselves.
+ * This should never happen except in the case of a VM regression so
+ * warn about it.
*/
- if ((current->flags & (PF_MEMALLOC|PF_KSWAPD)) == PF_MEMALLOC)
+ if (WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD)) ==
+ PF_MEMALLOC))
goto redirty;
/*
@@ -1161,8 +1138,8 @@
end_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + size);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
- error = xfs_bmapi(NULL, ip, offset_fsb, end_fsb - offset_fsb,
- XFS_BMAPI_ENTIRE, NULL, 0, &imap, &nimaps, NULL);
+ error = xfs_bmapi_read(ip, offset_fsb, end_fsb - offset_fsb,
+ &imap, &nimaps, XFS_BMAPI_ENTIRE);
if (error)
goto out_unlock;
@@ -1300,7 +1277,6 @@
bool is_async)
{
struct xfs_ioend *ioend = iocb->private;
- struct inode *inode = ioend->io_inode;
/*
* blockdev_direct_IO can return an error even after the I/O
@@ -1311,28 +1287,17 @@
ioend->io_offset = offset;
ioend->io_size = size;
+ ioend->io_iocb = iocb;
+ ioend->io_result = ret;
if (private && size > 0)
ioend->io_type = IO_UNWRITTEN;
if (is_async) {
- /*
- * If we are converting an unwritten extent we need to delay
- * the AIO completion until after the unwrittent extent
- * conversion has completed, otherwise do it ASAP.
- */
- if (ioend->io_type == IO_UNWRITTEN) {
- ioend->io_iocb = iocb;
- ioend->io_result = ret;
- } else {
- aio_complete(iocb, ret, 0);
- }
+ ioend->io_isasync = 1;
xfs_finish_ioend(ioend);
} else {
xfs_finish_ioend_sync(ioend);
}
-
- /* XXX: probably should move into the real I/O completion handler */
- inode_dio_done(inode);
}
STATIC ssize_t
diff --git a/fs/xfs/xfs_aops.h b/fs/xfs/xfs_aops.h
index 71f721e..116dd5c 100644
--- a/fs/xfs/xfs_aops.h
+++ b/fs/xfs/xfs_aops.h
@@ -47,6 +47,7 @@
unsigned int io_type; /* delalloc / unwritten */
int io_error; /* I/O error code */
atomic_t io_remaining; /* hold count */
+ unsigned int io_isasync : 1; /* needs aio_complete */
struct inode *io_inode; /* file being written to */
struct buffer_head *io_buffer_head;/* buffer linked list head */
struct buffer_head *io_buffer_tail;/* buffer linked list tail */
@@ -60,9 +61,6 @@
extern const struct address_space_operations xfs_address_space_operations;
extern int xfs_get_blocks(struct inode *, sector_t, struct buffer_head *, int);
-extern void xfs_ioend_init(void);
-extern void xfs_ioend_wait(struct xfs_inode *);
-
extern void xfs_count_page_state(struct page *, int *, int *);
#endif /* __XFS_AOPS_H__ */
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index 160bcdc..1e5d97f 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -319,7 +319,7 @@
return (error);
}
- xfs_trans_ijoin(args.trans, dp);
+ xfs_trans_ijoin(args.trans, dp, 0);
/*
* If the attribute list is non-existent or a shortform list,
@@ -389,7 +389,7 @@
* a new one. We need the inode to be in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args.trans, dp);
+ xfs_trans_ijoin(args.trans, dp, 0);
/*
* Commit the leaf transformation. We'll need another (linked)
@@ -537,7 +537,7 @@
* No need to make quota reservations here. We expect to release some
* blocks not allocate in the common case.
*/
- xfs_trans_ijoin(args.trans, dp);
+ xfs_trans_ijoin(args.trans, dp, 0);
/*
* Decide on what work routines to call based on the inode size.
@@ -809,7 +809,7 @@
* No need to make quota reservations here. We expect to release some
* blocks, not allocate, in the common case.
*/
- xfs_trans_ijoin(trans, dp);
+ xfs_trans_ijoin(trans, dp, 0);
/*
* Decide on what work routines to call based on the inode size.
@@ -823,18 +823,6 @@
if (error)
goto out;
- /*
- * Signal synchronous inactive transactions unless this is a
- * synchronous mount filesystem in which case we know that we're here
- * because we've been called out of xfs_inactive which means that the
- * last reference is gone and the unlink transaction has already hit
- * the disk so async inactive transactions are safe.
- */
- if (!(mp->m_flags & XFS_MOUNT_WSYNC)) {
- if (dp->i_d.di_anextents > 0)
- xfs_trans_set_sync(trans);
- }
-
error = xfs_itruncate_extents(&trans, dp, XFS_ATTR_FORK, 0);
if (error)
goto out;
@@ -973,7 +961,7 @@
* a new one. We need the inode to be in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
/*
* Commit the current trans (including the inode) and start
@@ -1075,7 +1063,7 @@
* in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
} else
xfs_da_buf_done(bp);
@@ -1149,7 +1137,7 @@
* a new one. We need the inode to be in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
} else
xfs_da_buf_done(bp);
return(0);
@@ -1303,7 +1291,7 @@
* in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
/*
* Commit the node conversion and start the next
@@ -1340,7 +1328,7 @@
* a new one. We need the inode to be in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
} else {
/*
* Addition succeeded, update Btree hashvals.
@@ -1452,7 +1440,7 @@
* in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
}
/*
@@ -1584,7 +1572,7 @@
* a new one. We need the inode to be in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
/*
* Commit the Btree join operation and start a new trans.
@@ -1635,7 +1623,7 @@
* in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
} else
xfs_da_brelse(args->trans, bp);
}
@@ -1975,10 +1963,9 @@
lblkno = args->rmtblkno;
while (valuelen > 0) {
nmap = ATTR_RMTVALUE_MAPSIZE;
- error = xfs_bmapi(args->trans, args->dp, (xfs_fileoff_t)lblkno,
- args->rmtblkcnt,
- XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
- NULL, 0, map, &nmap, NULL);
+ error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno,
+ args->rmtblkcnt, map, &nmap,
+ XFS_BMAPI_ATTRFORK);
if (error)
return(error);
ASSERT(nmap >= 1);
@@ -2052,10 +2039,9 @@
*/
xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
- error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno,
+ error = xfs_bmapi_write(args->trans, dp, (xfs_fileoff_t)lblkno,
blkcnt,
- XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA |
- XFS_BMAPI_WRITE,
+ XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
args->firstblock, args->total, &map, &nmap,
args->flist);
if (!error) {
@@ -2074,7 +2060,7 @@
* a new one. We need the inode to be in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, dp);
+ xfs_trans_ijoin(args->trans, dp, 0);
ASSERT(nmap == 1);
ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
@@ -2104,14 +2090,11 @@
*/
xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
- error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno,
- args->rmtblkcnt,
- XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
- args->firstblock, 0, &map, &nmap,
- NULL);
- if (error) {
+ error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno,
+ args->rmtblkcnt, &map, &nmap,
+ XFS_BMAPI_ATTRFORK);
+ if (error)
return(error);
- }
ASSERT(nmap == 1);
ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
(map.br_startblock != HOLESTARTBLOCK));
@@ -2121,16 +2104,17 @@
bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt,
XBF_LOCK | XBF_DONT_BLOCK);
- ASSERT(!xfs_buf_geterror(bp));
-
+ if (!bp)
+ return ENOMEM;
tmp = (valuelen < XFS_BUF_SIZE(bp)) ? valuelen :
XFS_BUF_SIZE(bp);
xfs_buf_iomove(bp, 0, tmp, src, XBRW_WRITE);
if (tmp < XFS_BUF_SIZE(bp))
xfs_buf_zero(bp, tmp, XFS_BUF_SIZE(bp) - tmp);
- if ((error = xfs_bwrite(mp, bp))) {/* GROT: NOTE: synchronous write */
- return (error);
- }
+ error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */
+ xfs_buf_relse(bp);
+ if (error)
+ return error;
src += tmp;
valuelen -= tmp;
@@ -2166,16 +2150,12 @@
/*
* Try to remember where we decided to put the value.
*/
- xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
- error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno,
- args->rmtblkcnt,
- XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
- args->firstblock, 0, &map, &nmap,
- args->flist);
- if (error) {
+ error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno,
+ args->rmtblkcnt, &map, &nmap,
+ XFS_BMAPI_ATTRFORK);
+ if (error)
return(error);
- }
ASSERT(nmap == 1);
ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
(map.br_startblock != HOLESTARTBLOCK));
@@ -2188,8 +2168,7 @@
*/
bp = xfs_incore(mp->m_ddev_targp, dblkno, blkcnt, XBF_TRYLOCK);
if (bp) {
- XFS_BUF_STALE(bp);
- XFS_BUF_UNDELAYWRITE(bp);
+ xfs_buf_stale(bp);
xfs_buf_relse(bp);
bp = NULL;
}
@@ -2227,7 +2206,7 @@
* a new one. We need the inode to be in all transactions.
*/
if (committed)
- xfs_trans_ijoin(args->trans, args->dp);
+ xfs_trans_ijoin(args->trans, args->dp, 0);
/*
* Close out trans and start the next one in the chain.
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index 8fad960..d4906e7 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -2926,9 +2926,8 @@
* Try to remember where we decided to put the value.
*/
nmap = 1;
- error = xfs_bmapi(*trans, dp, (xfs_fileoff_t)tblkno, tblkcnt,
- XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
- NULL, 0, &map, &nmap, NULL);
+ error = xfs_bmapi_read(dp, (xfs_fileoff_t)tblkno, tblkcnt,
+ &map, &nmap, XFS_BMAPI_ATTRFORK);
if (error) {
return(error);
}
@@ -2948,6 +2947,8 @@
bp = xfs_trans_get_buf(*trans,
dp->i_mount->m_ddev_targp,
dblkno, dblkcnt, XBF_LOCK);
+ if (!bp)
+ return ENOMEM;
xfs_trans_binval(*trans, bp);
/*
* Roll to next transaction.
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 452a291..c68baeb 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -50,17 +50,22 @@
#include "xfs_trace.h"
-#ifdef DEBUG
-STATIC void
-xfs_bmap_check_leaf_extents(xfs_btree_cur_t *cur, xfs_inode_t *ip, int whichfork);
-#endif
-
kmem_zone_t *xfs_bmap_free_item_zone;
/*
* Prototypes for internal bmap routines.
*/
+#ifdef DEBUG
+STATIC void
+xfs_bmap_check_leaf_extents(
+ struct xfs_btree_cur *cur,
+ struct xfs_inode *ip,
+ int whichfork);
+#else
+#define xfs_bmap_check_leaf_extents(cur, ip, whichfork) do { } while (0)
+#endif
+
/*
* Called from xfs_bmap_add_attrfork to handle extents format files.
@@ -85,58 +90,6 @@
int *flags); /* inode logging flags */
/*
- * Called by xfs_bmap_add_extent to handle cases converting a delayed
- * allocation to a real allocation.
- */
-STATIC int /* error */
-xfs_bmap_add_extent_delay_real(
- struct xfs_trans *tp, /* transaction pointer */
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_btree_cur_t **curp, /* if *curp is null, not a btree */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- xfs_filblks_t *dnew, /* new delayed-alloc indirect blocks */
- xfs_fsblock_t *first, /* pointer to firstblock variable */
- xfs_bmap_free_t *flist, /* list of extents to be freed */
- int *logflagsp); /* inode logging flags */
-
-/*
- * Called by xfs_bmap_add_extent to handle cases converting a hole
- * to a delayed allocation.
- */
-STATIC int /* error */
-xfs_bmap_add_extent_hole_delay(
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- int *logflagsp); /* inode logging flags */
-
-/*
- * Called by xfs_bmap_add_extent to handle cases converting a hole
- * to a real allocation.
- */
-STATIC int /* error */
-xfs_bmap_add_extent_hole_real(
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_btree_cur_t *cur, /* if null, not a btree */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- int *logflagsp, /* inode logging flags */
- int whichfork); /* data or attr fork */
-
-/*
- * Called by xfs_bmap_add_extent to handle cases converting an unwritten
- * allocation to a real allocation or vice versa.
- */
-STATIC int /* error */
-xfs_bmap_add_extent_unwritten_real(
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_btree_cur_t **curp, /* if *curp is null, not a btree */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- int *logflagsp); /* inode logging flags */
-
-/*
* xfs_bmap_alloc is called by xfs_bmapi to allocate an extent for a file.
* It figures out where to ask the underlying allocator to put the new extent.
*/
@@ -215,19 +168,6 @@
xfs_bmbt_irec_t *prevp); /* out: previous extent entry found */
/*
- * Check the last inode extent to determine whether this allocation will result
- * in blocks being allocated at the end of the file. When we allocate new data
- * blocks at the end of the file which do not start at the previous data block,
- * we will try to align the new blocks at stripe unit boundaries.
- */
-STATIC int /* error */
-xfs_bmap_isaeof(
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_fileoff_t off, /* file offset in fsblocks */
- int whichfork, /* data or attribute fork */
- char *aeof); /* return value */
-
-/*
* Compute the worst-case number of indirect blocks that will be used
* for ip's delayed extent of length "len".
*/
@@ -431,188 +371,13 @@
}
/*
- * Called by xfs_bmapi to update file extent records and the btree
- * after allocating space (or doing a delayed allocation).
- */
-STATIC int /* error */
-xfs_bmap_add_extent(
- struct xfs_trans *tp, /* transaction pointer */
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_btree_cur_t **curp, /* if *curp is null, not a btree */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- xfs_fsblock_t *first, /* pointer to firstblock variable */
- xfs_bmap_free_t *flist, /* list of extents to be freed */
- int *logflagsp, /* inode logging flags */
- int whichfork) /* data or attr fork */
-{
- xfs_btree_cur_t *cur; /* btree cursor or null */
- xfs_filblks_t da_new; /* new count del alloc blocks used */
- xfs_filblks_t da_old; /* old count del alloc blocks used */
- int error; /* error return value */
- xfs_ifork_t *ifp; /* inode fork ptr */
- int logflags; /* returned value */
- xfs_extnum_t nextents; /* number of extents in file now */
-
- XFS_STATS_INC(xs_add_exlist);
-
- cur = *curp;
- ifp = XFS_IFORK_PTR(ip, whichfork);
- nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
- da_old = da_new = 0;
- error = 0;
-
- ASSERT(*idx >= 0);
- ASSERT(*idx <= nextents);
-
- /*
- * This is the first extent added to a new/empty file.
- * Special case this one, so other routines get to assume there are
- * already extents in the list.
- */
- if (nextents == 0) {
- xfs_iext_insert(ip, *idx, 1, new,
- whichfork == XFS_ATTR_FORK ? BMAP_ATTRFORK : 0);
-
- ASSERT(cur == NULL);
-
- if (!isnullstartblock(new->br_startblock)) {
- XFS_IFORK_NEXT_SET(ip, whichfork, 1);
- logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
- } else
- logflags = 0;
- }
- /*
- * Any kind of new delayed allocation goes here.
- */
- else if (isnullstartblock(new->br_startblock)) {
- if (cur)
- ASSERT((cur->bc_private.b.flags &
- XFS_BTCUR_BPRV_WASDEL) == 0);
- error = xfs_bmap_add_extent_hole_delay(ip, idx, new,
- &logflags);
- }
- /*
- * Real allocation off the end of the file.
- */
- else if (*idx == nextents) {
- if (cur)
- ASSERT((cur->bc_private.b.flags &
- XFS_BTCUR_BPRV_WASDEL) == 0);
- error = xfs_bmap_add_extent_hole_real(ip, idx, cur, new,
- &logflags, whichfork);
- } else {
- xfs_bmbt_irec_t prev; /* old extent at offset idx */
-
- /*
- * Get the record referred to by idx.
- */
- xfs_bmbt_get_all(xfs_iext_get_ext(ifp, *idx), &prev);
- /*
- * If it's a real allocation record, and the new allocation ends
- * after the start of the referred to record, then we're filling
- * in a delayed or unwritten allocation with a real one, or
- * converting real back to unwritten.
- */
- if (!isnullstartblock(new->br_startblock) &&
- new->br_startoff + new->br_blockcount > prev.br_startoff) {
- if (prev.br_state != XFS_EXT_UNWRITTEN &&
- isnullstartblock(prev.br_startblock)) {
- da_old = startblockval(prev.br_startblock);
- if (cur)
- ASSERT(cur->bc_private.b.flags &
- XFS_BTCUR_BPRV_WASDEL);
- error = xfs_bmap_add_extent_delay_real(tp, ip,
- idx, &cur, new, &da_new,
- first, flist, &logflags);
- } else {
- ASSERT(new->br_state == XFS_EXT_NORM ||
- new->br_state == XFS_EXT_UNWRITTEN);
-
- error = xfs_bmap_add_extent_unwritten_real(ip,
- idx, &cur, new, &logflags);
- if (error)
- goto done;
- }
- }
- /*
- * Otherwise we're filling in a hole with an allocation.
- */
- else {
- if (cur)
- ASSERT((cur->bc_private.b.flags &
- XFS_BTCUR_BPRV_WASDEL) == 0);
- error = xfs_bmap_add_extent_hole_real(ip, idx, cur,
- new, &logflags, whichfork);
- }
- }
-
- if (error)
- goto done;
- ASSERT(*curp == cur || *curp == NULL);
-
- /*
- * Convert to a btree if necessary.
- */
- if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_EXTENTS &&
- XFS_IFORK_NEXTENTS(ip, whichfork) > ifp->if_ext_max) {
- int tmp_logflags; /* partial log flag return val */
-
- ASSERT(cur == NULL);
- error = xfs_bmap_extents_to_btree(tp, ip, first,
- flist, &cur, da_old > 0, &tmp_logflags, whichfork);
- logflags |= tmp_logflags;
- if (error)
- goto done;
- }
- /*
- * Adjust for changes in reserved delayed indirect blocks.
- * Nothing to do for disk quotas here.
- */
- if (da_old || da_new) {
- xfs_filblks_t nblks;
-
- nblks = da_new;
- if (cur)
- nblks += cur->bc_private.b.allocated;
- ASSERT(nblks <= da_old);
- if (nblks < da_old)
- xfs_icsb_modify_counters(ip->i_mount, XFS_SBS_FDBLOCKS,
- (int64_t)(da_old - nblks), 0);
- }
- /*
- * Clear out the allocated field, done with it now in any case.
- */
- if (cur) {
- cur->bc_private.b.allocated = 0;
- *curp = cur;
- }
-done:
-#ifdef DEBUG
- if (!error)
- xfs_bmap_check_leaf_extents(*curp, ip, whichfork);
-#endif
- *logflagsp = logflags;
- return error;
-}
-
-/*
- * Called by xfs_bmap_add_extent to handle cases converting a delayed
- * allocation to a real allocation.
+ * Convert a delayed allocation to a real allocation.
*/
STATIC int /* error */
xfs_bmap_add_extent_delay_real(
- struct xfs_trans *tp, /* transaction pointer */
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_btree_cur_t **curp, /* if *curp is null, not a btree */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- xfs_filblks_t *dnew, /* new delayed-alloc indirect blocks */
- xfs_fsblock_t *first, /* pointer to firstblock variable */
- xfs_bmap_free_t *flist, /* list of extents to be freed */
- int *logflagsp) /* inode logging flags */
+ struct xfs_bmalloca *bma)
{
- xfs_btree_cur_t *cur; /* btree cursor */
+ struct xfs_bmbt_irec *new = &bma->got;
int diff; /* temp value */
xfs_bmbt_rec_host_t *ep; /* extent entry for idx */
int error; /* error return value */
@@ -623,10 +388,22 @@
/* left is 0, right is 1, prev is 2 */
int rval=0; /* return value (logging flags) */
int state = 0;/* state bits, accessed thru macros */
- xfs_filblks_t temp=0; /* value for dnew calculations */
- xfs_filblks_t temp2=0;/* value for dnew calculations */
+ xfs_filblks_t da_new; /* new count del alloc blocks used */
+ xfs_filblks_t da_old; /* old count del alloc blocks used */
+ xfs_filblks_t temp=0; /* value for da_new calculations */
+ xfs_filblks_t temp2=0;/* value for da_new calculations */
int tmp_rval; /* partial logging flags */
+ ifp = XFS_IFORK_PTR(bma->ip, XFS_DATA_FORK);
+
+ ASSERT(bma->idx >= 0);
+ ASSERT(bma->idx <= ifp->if_bytes / sizeof(struct xfs_bmbt_rec));
+ ASSERT(!isnullstartblock(new->br_startblock));
+ ASSERT(!bma->cur ||
+ (bma->cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL));
+
+ XFS_STATS_INC(xs_add_exlist);
+
#define LEFT r[0]
#define RIGHT r[1]
#define PREV r[2]
@@ -634,14 +411,15 @@
/*
* Set up a bunch of variables to make the tests simpler.
*/
- cur = *curp;
- ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
- ep = xfs_iext_get_ext(ifp, *idx);
+ ep = xfs_iext_get_ext(ifp, bma->idx);
xfs_bmbt_get_all(ep, &PREV);
new_endoff = new->br_startoff + new->br_blockcount;
ASSERT(PREV.br_startoff <= new->br_startoff);
ASSERT(PREV.br_startoff + PREV.br_blockcount >= new_endoff);
+ da_old = startblockval(PREV.br_startblock);
+ da_new = 0;
+
/*
* Set flags determining what part of the previous delayed allocation
* extent is being replaced by a real allocation.
@@ -655,9 +433,9 @@
* Check and set flags if this segment has a left neighbor.
* Don't set contiguous if the combined extent would be too large.
*/
- if (*idx > 0) {
+ if (bma->idx > 0) {
state |= BMAP_LEFT_VALID;
- xfs_bmbt_get_all(xfs_iext_get_ext(ifp, *idx - 1), &LEFT);
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma->idx - 1), &LEFT);
if (isnullstartblock(LEFT.br_startblock))
state |= BMAP_LEFT_DELAY;
@@ -675,9 +453,9 @@
* Don't set contiguous if the combined extent would be too large.
* Also check for all-three-contiguous being too large.
*/
- if (*idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1) {
+ if (bma->idx < bma->ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1) {
state |= BMAP_RIGHT_VALID;
- xfs_bmbt_get_all(xfs_iext_get_ext(ifp, *idx + 1), &RIGHT);
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma->idx + 1), &RIGHT);
if (isnullstartblock(RIGHT.br_startblock))
state |= BMAP_RIGHT_DELAY;
@@ -708,38 +486,41 @@
* Filling in all of a previously delayed allocation extent.
* The left and right neighbors are both contiguous with new.
*/
- --*idx;
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
- xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, *idx),
+ bma->idx--;
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
+ xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, bma->idx),
LEFT.br_blockcount + PREV.br_blockcount +
RIGHT.br_blockcount);
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- xfs_iext_remove(ip, *idx + 1, 2, state);
- ip->i_d.di_nextents--;
- if (cur == NULL)
+ xfs_iext_remove(bma->ip, bma->idx + 1, 2, state);
+ bma->ip->i_d.di_nextents--;
+ if (bma->cur == NULL)
rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
else {
rval = XFS_ILOG_CORE;
- if ((error = xfs_bmbt_lookup_eq(cur, RIGHT.br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, RIGHT.br_startoff,
RIGHT.br_startblock,
- RIGHT.br_blockcount, &i)))
+ RIGHT.br_blockcount, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_btree_delete(cur, &i)))
+ error = xfs_btree_delete(bma->cur, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_btree_decrement(cur, 0, &i)))
+ error = xfs_btree_decrement(bma->cur, 0, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
+ error = xfs_bmbt_update(bma->cur, LEFT.br_startoff,
LEFT.br_startblock,
LEFT.br_blockcount +
PREV.br_blockcount +
- RIGHT.br_blockcount, LEFT.br_state)))
+ RIGHT.br_blockcount, LEFT.br_state);
+ if (error)
goto done;
}
- *dnew = 0;
break;
case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_LEFT_CONTIG:
@@ -747,30 +528,31 @@
* Filling in all of a previously delayed allocation extent.
* The left neighbor is contiguous, the right is not.
*/
- --*idx;
+ bma->idx--;
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
- xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, *idx),
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
+ xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, bma->idx),
LEFT.br_blockcount + PREV.br_blockcount);
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- xfs_iext_remove(ip, *idx + 1, 1, state);
- if (cur == NULL)
+ xfs_iext_remove(bma->ip, bma->idx + 1, 1, state);
+ if (bma->cur == NULL)
rval = XFS_ILOG_DEXT;
else {
rval = 0;
- if ((error = xfs_bmbt_lookup_eq(cur, LEFT.br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, LEFT.br_startoff,
LEFT.br_startblock, LEFT.br_blockcount,
- &i)))
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
+ error = xfs_bmbt_update(bma->cur, LEFT.br_startoff,
LEFT.br_startblock,
LEFT.br_blockcount +
- PREV.br_blockcount, LEFT.br_state)))
+ PREV.br_blockcount, LEFT.br_state);
+ if (error)
goto done;
}
- *dnew = 0;
break;
case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -778,30 +560,30 @@
* Filling in all of a previously delayed allocation extent.
* The right neighbor is contiguous, the left is not.
*/
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
xfs_bmbt_set_startblock(ep, new->br_startblock);
xfs_bmbt_set_blockcount(ep,
PREV.br_blockcount + RIGHT.br_blockcount);
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- xfs_iext_remove(ip, *idx + 1, 1, state);
- if (cur == NULL)
+ xfs_iext_remove(bma->ip, bma->idx + 1, 1, state);
+ if (bma->cur == NULL)
rval = XFS_ILOG_DEXT;
else {
rval = 0;
- if ((error = xfs_bmbt_lookup_eq(cur, RIGHT.br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, RIGHT.br_startoff,
RIGHT.br_startblock,
- RIGHT.br_blockcount, &i)))
+ RIGHT.br_blockcount, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, PREV.br_startoff,
+ error = xfs_bmbt_update(bma->cur, PREV.br_startoff,
new->br_startblock,
PREV.br_blockcount +
- RIGHT.br_blockcount, PREV.br_state)))
+ RIGHT.br_blockcount, PREV.br_state);
+ if (error)
goto done;
}
-
- *dnew = 0;
break;
case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING:
@@ -810,27 +592,27 @@
* Neither the left nor right neighbors are contiguous with
* the new one.
*/
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
xfs_bmbt_set_startblock(ep, new->br_startblock);
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- ip->i_d.di_nextents++;
- if (cur == NULL)
+ bma->ip->i_d.di_nextents++;
+ if (bma->cur == NULL)
rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
else {
rval = XFS_ILOG_CORE;
- if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, new->br_startoff,
new->br_startblock, new->br_blockcount,
- &i)))
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 0, done);
- cur->bc_rec.b.br_state = XFS_EXT_NORM;
- if ((error = xfs_btree_insert(cur, &i)))
+ bma->cur->bc_rec.b.br_state = XFS_EXT_NORM;
+ error = xfs_btree_insert(bma->cur, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
}
-
- *dnew = 0;
break;
case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG:
@@ -838,39 +620,40 @@
* Filling in the first part of a previous delayed allocation.
* The left neighbor is contiguous.
*/
- trace_xfs_bmap_pre_update(ip, *idx - 1, state, _THIS_IP_);
- xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, *idx - 1),
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx - 1, state, _THIS_IP_);
+ xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, bma->idx - 1),
LEFT.br_blockcount + new->br_blockcount);
xfs_bmbt_set_startoff(ep,
PREV.br_startoff + new->br_blockcount);
- trace_xfs_bmap_post_update(ip, *idx - 1, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx - 1, state, _THIS_IP_);
temp = PREV.br_blockcount - new->br_blockcount;
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
xfs_bmbt_set_blockcount(ep, temp);
- if (cur == NULL)
+ if (bma->cur == NULL)
rval = XFS_ILOG_DEXT;
else {
rval = 0;
- if ((error = xfs_bmbt_lookup_eq(cur, LEFT.br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, LEFT.br_startoff,
LEFT.br_startblock, LEFT.br_blockcount,
- &i)))
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, LEFT.br_startoff,
+ error = xfs_bmbt_update(bma->cur, LEFT.br_startoff,
LEFT.br_startblock,
LEFT.br_blockcount +
new->br_blockcount,
- LEFT.br_state)))
+ LEFT.br_state);
+ if (error)
goto done;
}
- temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
+ da_new = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(bma->ip, temp),
startblockval(PREV.br_startblock));
- xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ xfs_bmbt_set_startblock(ep, nullstartblock(da_new));
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- --*idx;
- *dnew = temp;
+ bma->idx--;
break;
case BMAP_LEFT_FILLING:
@@ -878,43 +661,43 @@
* Filling in the first part of a previous delayed allocation.
* The left neighbor is not contiguous.
*/
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
xfs_bmbt_set_startoff(ep, new_endoff);
temp = PREV.br_blockcount - new->br_blockcount;
xfs_bmbt_set_blockcount(ep, temp);
- xfs_iext_insert(ip, *idx, 1, new, state);
- ip->i_d.di_nextents++;
- if (cur == NULL)
+ xfs_iext_insert(bma->ip, bma->idx, 1, new, state);
+ bma->ip->i_d.di_nextents++;
+ if (bma->cur == NULL)
rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
else {
rval = XFS_ILOG_CORE;
- if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, new->br_startoff,
new->br_startblock, new->br_blockcount,
- &i)))
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 0, done);
- cur->bc_rec.b.br_state = XFS_EXT_NORM;
- if ((error = xfs_btree_insert(cur, &i)))
+ bma->cur->bc_rec.b.br_state = XFS_EXT_NORM;
+ error = xfs_btree_insert(bma->cur, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
}
- if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_nextents > ip->i_df.if_ext_max) {
- error = xfs_bmap_extents_to_btree(tp, ip,
- first, flist, &cur, 1, &tmp_rval,
- XFS_DATA_FORK);
+ if (bma->ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ bma->ip->i_d.di_nextents > bma->ip->i_df.if_ext_max) {
+ error = xfs_bmap_extents_to_btree(bma->tp, bma->ip,
+ bma->firstblock, bma->flist,
+ &bma->cur, 1, &tmp_rval, XFS_DATA_FORK);
rval |= tmp_rval;
if (error)
goto done;
}
- temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
+ da_new = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(bma->ip, temp),
startblockval(PREV.br_startblock) -
- (cur ? cur->bc_private.b.allocated : 0));
- ep = xfs_iext_get_ext(ifp, *idx + 1);
- xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
- trace_xfs_bmap_post_update(ip, *idx + 1, state, _THIS_IP_);
-
- *dnew = temp;
+ (bma->cur ? bma->cur->bc_private.b.allocated : 0));
+ ep = xfs_iext_get_ext(ifp, bma->idx + 1);
+ xfs_bmbt_set_startblock(ep, nullstartblock(da_new));
+ trace_xfs_bmap_post_update(bma->ip, bma->idx + 1, state, _THIS_IP_);
break;
case BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -923,38 +706,39 @@
* The right neighbor is contiguous with the new allocation.
*/
temp = PREV.br_blockcount - new->br_blockcount;
- trace_xfs_bmap_pre_update(ip, *idx + 1, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx + 1, state, _THIS_IP_);
xfs_bmbt_set_blockcount(ep, temp);
- xfs_bmbt_set_allf(xfs_iext_get_ext(ifp, *idx + 1),
+ xfs_bmbt_set_allf(xfs_iext_get_ext(ifp, bma->idx + 1),
new->br_startoff, new->br_startblock,
new->br_blockcount + RIGHT.br_blockcount,
RIGHT.br_state);
- trace_xfs_bmap_post_update(ip, *idx + 1, state, _THIS_IP_);
- if (cur == NULL)
+ trace_xfs_bmap_post_update(bma->ip, bma->idx + 1, state, _THIS_IP_);
+ if (bma->cur == NULL)
rval = XFS_ILOG_DEXT;
else {
rval = 0;
- if ((error = xfs_bmbt_lookup_eq(cur, RIGHT.br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, RIGHT.br_startoff,
RIGHT.br_startblock,
- RIGHT.br_blockcount, &i)))
+ RIGHT.br_blockcount, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, new->br_startoff,
+ error = xfs_bmbt_update(bma->cur, new->br_startoff,
new->br_startblock,
new->br_blockcount +
RIGHT.br_blockcount,
- RIGHT.br_state)))
+ RIGHT.br_state);
+ if (error)
goto done;
}
- temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
+ da_new = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(bma->ip, temp),
startblockval(PREV.br_startblock));
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
- xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
+ xfs_bmbt_set_startblock(ep, nullstartblock(da_new));
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- ++*idx;
- *dnew = temp;
+ bma->idx++;
break;
case BMAP_RIGHT_FILLING:
@@ -963,42 +747,43 @@
* The right neighbor is not contiguous.
*/
temp = PREV.br_blockcount - new->br_blockcount;
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
xfs_bmbt_set_blockcount(ep, temp);
- xfs_iext_insert(ip, *idx + 1, 1, new, state);
- ip->i_d.di_nextents++;
- if (cur == NULL)
+ xfs_iext_insert(bma->ip, bma->idx + 1, 1, new, state);
+ bma->ip->i_d.di_nextents++;
+ if (bma->cur == NULL)
rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
else {
rval = XFS_ILOG_CORE;
- if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, new->br_startoff,
new->br_startblock, new->br_blockcount,
- &i)))
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 0, done);
- cur->bc_rec.b.br_state = XFS_EXT_NORM;
- if ((error = xfs_btree_insert(cur, &i)))
+ bma->cur->bc_rec.b.br_state = XFS_EXT_NORM;
+ error = xfs_btree_insert(bma->cur, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
}
- if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_nextents > ip->i_df.if_ext_max) {
- error = xfs_bmap_extents_to_btree(tp, ip,
- first, flist, &cur, 1, &tmp_rval,
- XFS_DATA_FORK);
+ if (bma->ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ bma->ip->i_d.di_nextents > bma->ip->i_df.if_ext_max) {
+ error = xfs_bmap_extents_to_btree(bma->tp, bma->ip,
+ bma->firstblock, bma->flist, &bma->cur, 1,
+ &tmp_rval, XFS_DATA_FORK);
rval |= tmp_rval;
if (error)
goto done;
}
- temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
+ da_new = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(bma->ip, temp),
startblockval(PREV.br_startblock) -
- (cur ? cur->bc_private.b.allocated : 0));
- ep = xfs_iext_get_ext(ifp, *idx);
- xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ (bma->cur ? bma->cur->bc_private.b.allocated : 0));
+ ep = xfs_iext_get_ext(ifp, bma->idx);
+ xfs_bmbt_set_startblock(ep, nullstartblock(da_new));
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- ++*idx;
- *dnew = temp;
+ bma->idx++;
break;
case 0:
@@ -1024,82 +809,65 @@
*/
temp = new->br_startoff - PREV.br_startoff;
temp2 = PREV.br_startoff + PREV.br_blockcount - new_endoff;
- trace_xfs_bmap_pre_update(ip, *idx, 0, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, 0, _THIS_IP_);
xfs_bmbt_set_blockcount(ep, temp); /* truncate PREV */
LEFT = *new;
RIGHT.br_state = PREV.br_state;
RIGHT.br_startblock = nullstartblock(
- (int)xfs_bmap_worst_indlen(ip, temp2));
+ (int)xfs_bmap_worst_indlen(bma->ip, temp2));
RIGHT.br_startoff = new_endoff;
RIGHT.br_blockcount = temp2;
/* insert LEFT (r[0]) and RIGHT (r[1]) at the same time */
- xfs_iext_insert(ip, *idx + 1, 2, &LEFT, state);
- ip->i_d.di_nextents++;
- if (cur == NULL)
+ xfs_iext_insert(bma->ip, bma->idx + 1, 2, &LEFT, state);
+ bma->ip->i_d.di_nextents++;
+ if (bma->cur == NULL)
rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
else {
rval = XFS_ILOG_CORE;
- if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
+ error = xfs_bmbt_lookup_eq(bma->cur, new->br_startoff,
new->br_startblock, new->br_blockcount,
- &i)))
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 0, done);
- cur->bc_rec.b.br_state = XFS_EXT_NORM;
- if ((error = xfs_btree_insert(cur, &i)))
+ bma->cur->bc_rec.b.br_state = XFS_EXT_NORM;
+ error = xfs_btree_insert(bma->cur, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
}
- if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_nextents > ip->i_df.if_ext_max) {
- error = xfs_bmap_extents_to_btree(tp, ip,
- first, flist, &cur, 1, &tmp_rval,
- XFS_DATA_FORK);
+ if (bma->ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ bma->ip->i_d.di_nextents > bma->ip->i_df.if_ext_max) {
+ error = xfs_bmap_extents_to_btree(bma->tp, bma->ip,
+ bma->firstblock, bma->flist, &bma->cur,
+ 1, &tmp_rval, XFS_DATA_FORK);
rval |= tmp_rval;
if (error)
goto done;
}
- temp = xfs_bmap_worst_indlen(ip, temp);
- temp2 = xfs_bmap_worst_indlen(ip, temp2);
+ temp = xfs_bmap_worst_indlen(bma->ip, temp);
+ temp2 = xfs_bmap_worst_indlen(bma->ip, temp2);
diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) -
- (cur ? cur->bc_private.b.allocated : 0));
- if (diff > 0 &&
- xfs_icsb_modify_counters(ip->i_mount, XFS_SBS_FDBLOCKS,
- -((int64_t)diff), 0)) {
- /*
- * Ick gross gag me with a spoon.
- */
- ASSERT(0); /* want to see if this ever happens! */
- while (diff > 0) {
- if (temp) {
- temp--;
- diff--;
- if (!diff ||
- !xfs_icsb_modify_counters(ip->i_mount,
- XFS_SBS_FDBLOCKS,
- -((int64_t)diff), 0))
- break;
- }
- if (temp2) {
- temp2--;
- diff--;
- if (!diff ||
- !xfs_icsb_modify_counters(ip->i_mount,
- XFS_SBS_FDBLOCKS,
- -((int64_t)diff), 0))
- break;
- }
- }
+ (bma->cur ? bma->cur->bc_private.b.allocated : 0));
+ if (diff > 0) {
+ error = xfs_icsb_modify_counters(bma->ip->i_mount,
+ XFS_SBS_FDBLOCKS,
+ -((int64_t)diff), 0);
+ ASSERT(!error);
+ if (error)
+ goto done;
}
- ep = xfs_iext_get_ext(ifp, *idx);
- xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
- trace_xfs_bmap_pre_update(ip, *idx + 2, state, _THIS_IP_);
- xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, *idx + 2),
- nullstartblock((int)temp2));
- trace_xfs_bmap_post_update(ip, *idx + 2, state, _THIS_IP_);
- ++*idx;
- *dnew = temp + temp2;
+ ep = xfs_iext_get_ext(ifp, bma->idx);
+ xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx + 2, state, _THIS_IP_);
+ xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, bma->idx + 2),
+ nullstartblock((int)temp2));
+ trace_xfs_bmap_post_update(bma->ip, bma->idx + 2, state, _THIS_IP_);
+
+ bma->idx++;
+ da_new = temp + temp2;
break;
case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG | BMAP_RIGHT_CONTIG:
@@ -1114,9 +882,40 @@
*/
ASSERT(0);
}
- *curp = cur;
+
+ /* convert to a btree if necessary */
+ if (XFS_IFORK_FORMAT(bma->ip, XFS_DATA_FORK) == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(bma->ip, XFS_DATA_FORK) > ifp->if_ext_max) {
+ int tmp_logflags; /* partial log flag return val */
+
+ ASSERT(bma->cur == NULL);
+ error = xfs_bmap_extents_to_btree(bma->tp, bma->ip,
+ bma->firstblock, bma->flist, &bma->cur,
+ da_old > 0, &tmp_logflags, XFS_DATA_FORK);
+ bma->logflags |= tmp_logflags;
+ if (error)
+ goto done;
+ }
+
+ /* adjust for changes in reserved delayed indirect blocks */
+ if (da_old || da_new) {
+ temp = da_new;
+ if (bma->cur)
+ temp += bma->cur->bc_private.b.allocated;
+ ASSERT(temp <= da_old);
+ if (temp < da_old)
+ xfs_icsb_modify_counters(bma->ip->i_mount,
+ XFS_SBS_FDBLOCKS,
+ (int64_t)(da_old - temp), 0);
+ }
+
+ /* clear out the allocated field, done with it now in any case. */
+ if (bma->cur)
+ bma->cur->bc_private.b.allocated = 0;
+
+ xfs_bmap_check_leaf_extents(bma->cur, bma->ip, XFS_DATA_FORK);
done:
- *logflagsp = rval;
+ bma->logflags |= rval;
return error;
#undef LEFT
#undef RIGHT
@@ -1124,15 +923,17 @@
}
/*
- * Called by xfs_bmap_add_extent to handle cases converting an unwritten
- * allocation to a real allocation or vice versa.
+ * Convert an unwritten allocation to a real allocation or vice versa.
*/
STATIC int /* error */
xfs_bmap_add_extent_unwritten_real(
+ struct xfs_trans *tp,
xfs_inode_t *ip, /* incore inode pointer */
xfs_extnum_t *idx, /* extent number to update/insert */
xfs_btree_cur_t **curp, /* if *curp is null, not a btree */
xfs_bmbt_irec_t *new, /* new data to add to file extents */
+ xfs_fsblock_t *first, /* pointer to firstblock variable */
+ xfs_bmap_free_t *flist, /* list of extents to be freed */
int *logflagsp) /* inode logging flags */
{
xfs_btree_cur_t *cur; /* btree cursor */
@@ -1148,15 +949,25 @@
int rval=0; /* return value (logging flags) */
int state = 0;/* state bits, accessed thru macros */
+ *logflagsp = 0;
+
+ cur = *curp;
+ ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
+
+ ASSERT(*idx >= 0);
+ ASSERT(*idx <= ifp->if_bytes / sizeof(struct xfs_bmbt_rec));
+ ASSERT(!isnullstartblock(new->br_startblock));
+
+ XFS_STATS_INC(xs_add_exlist);
+
#define LEFT r[0]
#define RIGHT r[1]
#define PREV r[2]
+
/*
* Set up a bunch of variables to make the tests simpler.
*/
error = 0;
- cur = *curp;
- ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
ep = xfs_iext_get_ext(ifp, *idx);
xfs_bmbt_get_all(ep, &PREV);
newext = new->br_state;
@@ -1406,10 +1217,11 @@
goto done;
if ((error = xfs_btree_decrement(cur, 0, &i)))
goto done;
- if (xfs_bmbt_update(cur, LEFT.br_startoff,
+ error = xfs_bmbt_update(cur, LEFT.br_startoff,
LEFT.br_startblock,
LEFT.br_blockcount + new->br_blockcount,
- LEFT.br_state))
+ LEFT.br_state);
+ if (error)
goto done;
}
break;
@@ -1607,9 +1419,29 @@
*/
ASSERT(0);
}
- *curp = cur;
+
+ /* convert to a btree if necessary */
+ if (XFS_IFORK_FORMAT(ip, XFS_DATA_FORK) == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > ifp->if_ext_max) {
+ int tmp_logflags; /* partial log flag return val */
+
+ ASSERT(cur == NULL);
+ error = xfs_bmap_extents_to_btree(tp, ip, first, flist, &cur,
+ 0, &tmp_logflags, XFS_DATA_FORK);
+ *logflagsp |= tmp_logflags;
+ if (error)
+ goto done;
+ }
+
+ /* clear out the allocated field, done with it now in any case. */
+ if (cur) {
+ cur->bc_private.b.allocated = 0;
+ *curp = cur;
+ }
+
+ xfs_bmap_check_leaf_extents(*curp, ip, XFS_DATA_FORK);
done:
- *logflagsp = rval;
+ *logflagsp |= rval;
return error;
#undef LEFT
#undef RIGHT
@@ -1617,16 +1449,13 @@
}
/*
- * Called by xfs_bmap_add_extent to handle cases converting a hole
- * to a delayed allocation.
+ * Convert a hole to a delayed allocation.
*/
-/*ARGSUSED*/
-STATIC int /* error */
+STATIC void
xfs_bmap_add_extent_hole_delay(
xfs_inode_t *ip, /* incore inode pointer */
xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- int *logflagsp) /* inode logging flags */
+ xfs_bmbt_irec_t *new) /* new data to add to file extents */
{
xfs_ifork_t *ifp; /* inode fork pointer */
xfs_bmbt_irec_t left; /* left neighbor extent entry */
@@ -1761,23 +1590,17 @@
* Nothing to do for disk quota accounting here.
*/
}
- *logflagsp = 0;
- return 0;
}
/*
- * Called by xfs_bmap_add_extent to handle cases converting a hole
- * to a real allocation.
+ * Convert a hole to a real allocation.
*/
STATIC int /* error */
xfs_bmap_add_extent_hole_real(
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_extnum_t *idx, /* extent number to update/insert */
- xfs_btree_cur_t *cur, /* if null, not a btree */
- xfs_bmbt_irec_t *new, /* new data to add to file extents */
- int *logflagsp, /* inode logging flags */
- int whichfork) /* data or attr fork */
+ struct xfs_bmalloca *bma,
+ int whichfork)
{
+ struct xfs_bmbt_irec *new = &bma->got;
int error; /* error return value */
int i; /* temp state */
xfs_ifork_t *ifp; /* inode fork pointer */
@@ -1786,19 +1609,26 @@
int rval=0; /* return value (logging flags) */
int state; /* state bits, accessed thru macros */
- ifp = XFS_IFORK_PTR(ip, whichfork);
- ASSERT(*idx <= ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t));
- state = 0;
+ ifp = XFS_IFORK_PTR(bma->ip, whichfork);
+ ASSERT(bma->idx >= 0);
+ ASSERT(bma->idx <= ifp->if_bytes / sizeof(struct xfs_bmbt_rec));
+ ASSERT(!isnullstartblock(new->br_startblock));
+ ASSERT(!bma->cur ||
+ !(bma->cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL));
+
+ XFS_STATS_INC(xs_add_exlist);
+
+ state = 0;
if (whichfork == XFS_ATTR_FORK)
state |= BMAP_ATTRFORK;
/*
* Check and set flags if this segment has a left neighbor.
*/
- if (*idx > 0) {
+ if (bma->idx > 0) {
state |= BMAP_LEFT_VALID;
- xfs_bmbt_get_all(xfs_iext_get_ext(ifp, *idx - 1), &left);
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma->idx - 1), &left);
if (isnullstartblock(left.br_startblock))
state |= BMAP_LEFT_DELAY;
}
@@ -1807,9 +1637,9 @@
* Check and set flags if this segment has a current value.
* Not true if we're inserting into the "hole" at eof.
*/
- if (*idx < ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t)) {
+ if (bma->idx < ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t)) {
state |= BMAP_RIGHT_VALID;
- xfs_bmbt_get_all(xfs_iext_get_ext(ifp, *idx), &right);
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma->idx), &right);
if (isnullstartblock(right.br_startblock))
state |= BMAP_RIGHT_DELAY;
}
@@ -1846,39 +1676,42 @@
* left and on the right.
* Merge all three into a single extent record.
*/
- --*idx;
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
- xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, *idx),
+ --bma->idx;
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
+ xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, bma->idx),
left.br_blockcount + new->br_blockcount +
right.br_blockcount);
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- xfs_iext_remove(ip, *idx + 1, 1, state);
+ xfs_iext_remove(bma->ip, bma->idx + 1, 1, state);
- XFS_IFORK_NEXT_SET(ip, whichfork,
- XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
- if (cur == NULL) {
+ XFS_IFORK_NEXT_SET(bma->ip, whichfork,
+ XFS_IFORK_NEXTENTS(bma->ip, whichfork) - 1);
+ if (bma->cur == NULL) {
rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
} else {
rval = XFS_ILOG_CORE;
- if ((error = xfs_bmbt_lookup_eq(cur,
- right.br_startoff,
- right.br_startblock,
- right.br_blockcount, &i)))
+ error = xfs_bmbt_lookup_eq(bma->cur, right.br_startoff,
+ right.br_startblock, right.br_blockcount,
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_btree_delete(cur, &i)))
+ error = xfs_btree_delete(bma->cur, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_btree_decrement(cur, 0, &i)))
+ error = xfs_btree_decrement(bma->cur, 0, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, left.br_startoff,
+ error = xfs_bmbt_update(bma->cur, left.br_startoff,
left.br_startblock,
left.br_blockcount +
new->br_blockcount +
right.br_blockcount,
- left.br_state)))
+ left.br_state);
+ if (error)
goto done;
}
break;
@@ -1889,27 +1722,28 @@
* on the left.
* Merge the new allocation with the left neighbor.
*/
- --*idx;
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
- xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, *idx),
+ --bma->idx;
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
+ xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, bma->idx),
left.br_blockcount + new->br_blockcount);
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- if (cur == NULL) {
+ if (bma->cur == NULL) {
rval = xfs_ilog_fext(whichfork);
} else {
rval = 0;
- if ((error = xfs_bmbt_lookup_eq(cur,
- left.br_startoff,
- left.br_startblock,
- left.br_blockcount, &i)))
+ error = xfs_bmbt_lookup_eq(bma->cur, left.br_startoff,
+ left.br_startblock, left.br_blockcount,
+ &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, left.br_startoff,
+ error = xfs_bmbt_update(bma->cur, left.br_startoff,
left.br_startblock,
left.br_blockcount +
new->br_blockcount,
- left.br_state)))
+ left.br_state);
+ if (error)
goto done;
}
break;
@@ -1920,28 +1754,30 @@
* on the right.
* Merge the new allocation with the right neighbor.
*/
- trace_xfs_bmap_pre_update(ip, *idx, state, _THIS_IP_);
- xfs_bmbt_set_allf(xfs_iext_get_ext(ifp, *idx),
+ trace_xfs_bmap_pre_update(bma->ip, bma->idx, state, _THIS_IP_);
+ xfs_bmbt_set_allf(xfs_iext_get_ext(ifp, bma->idx),
new->br_startoff, new->br_startblock,
new->br_blockcount + right.br_blockcount,
right.br_state);
- trace_xfs_bmap_post_update(ip, *idx, state, _THIS_IP_);
+ trace_xfs_bmap_post_update(bma->ip, bma->idx, state, _THIS_IP_);
- if (cur == NULL) {
+ if (bma->cur == NULL) {
rval = xfs_ilog_fext(whichfork);
} else {
rval = 0;
- if ((error = xfs_bmbt_lookup_eq(cur,
+ error = xfs_bmbt_lookup_eq(bma->cur,
right.br_startoff,
right.br_startblock,
- right.br_blockcount, &i)))
+ right.br_blockcount, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
- if ((error = xfs_bmbt_update(cur, new->br_startoff,
+ error = xfs_bmbt_update(bma->cur, new->br_startoff,
new->br_startblock,
new->br_blockcount +
right.br_blockcount,
- right.br_state)))
+ right.br_state);
+ if (error)
goto done;
}
break;
@@ -1952,28 +1788,50 @@
* real allocation.
* Insert a new entry.
*/
- xfs_iext_insert(ip, *idx, 1, new, state);
- XFS_IFORK_NEXT_SET(ip, whichfork,
- XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
- if (cur == NULL) {
+ xfs_iext_insert(bma->ip, bma->idx, 1, new, state);
+ XFS_IFORK_NEXT_SET(bma->ip, whichfork,
+ XFS_IFORK_NEXTENTS(bma->ip, whichfork) + 1);
+ if (bma->cur == NULL) {
rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
} else {
rval = XFS_ILOG_CORE;
- if ((error = xfs_bmbt_lookup_eq(cur,
+ error = xfs_bmbt_lookup_eq(bma->cur,
new->br_startoff,
new->br_startblock,
- new->br_blockcount, &i)))
+ new->br_blockcount, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 0, done);
- cur->bc_rec.b.br_state = new->br_state;
- if ((error = xfs_btree_insert(cur, &i)))
+ bma->cur->bc_rec.b.br_state = new->br_state;
+ error = xfs_btree_insert(bma->cur, &i);
+ if (error)
goto done;
XFS_WANT_CORRUPTED_GOTO(i == 1, done);
}
break;
}
+
+ /* convert to a btree if necessary */
+ if (XFS_IFORK_FORMAT(bma->ip, whichfork) == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(bma->ip, whichfork) > ifp->if_ext_max) {
+ int tmp_logflags; /* partial log flag return val */
+
+ ASSERT(bma->cur == NULL);
+ error = xfs_bmap_extents_to_btree(bma->tp, bma->ip,
+ bma->firstblock, bma->flist, &bma->cur,
+ 0, &tmp_logflags, whichfork);
+ bma->logflags |= tmp_logflags;
+ if (error)
+ goto done;
+ }
+
+ /* clear out the allocated field, done with it now in any case. */
+ if (bma->cur)
+ bma->cur->bc_private.b.allocated = 0;
+
+ xfs_bmap_check_leaf_extents(bma->cur, bma->ip, whichfork);
done:
- *logflagsp = rval;
+ bma->logflags |= rval;
return error;
}
@@ -2160,26 +2018,26 @@
XFS_FSB_TO_AGBNO(mp, x) < mp->m_sb.sb_agblocks)
mp = ap->ip->i_mount;
- nullfb = ap->firstblock == NULLFSBLOCK;
+ nullfb = *ap->firstblock == NULLFSBLOCK;
rt = XFS_IS_REALTIME_INODE(ap->ip) && ap->userdata;
- fb_agno = nullfb ? NULLAGNUMBER : XFS_FSB_TO_AGNO(mp, ap->firstblock);
+ fb_agno = nullfb ? NULLAGNUMBER : XFS_FSB_TO_AGNO(mp, *ap->firstblock);
/*
* If allocating at eof, and there's a previous real block,
* try to use its last block as our starting point.
*/
- if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF &&
- !isnullstartblock(ap->prevp->br_startblock) &&
- ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount,
- ap->prevp->br_startblock)) {
- ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount;
+ if (ap->eof && ap->prev.br_startoff != NULLFILEOFF &&
+ !isnullstartblock(ap->prev.br_startblock) &&
+ ISVALID(ap->prev.br_startblock + ap->prev.br_blockcount,
+ ap->prev.br_startblock)) {
+ ap->blkno = ap->prev.br_startblock + ap->prev.br_blockcount;
/*
* Adjust for the gap between prevp and us.
*/
- adjust = ap->off -
- (ap->prevp->br_startoff + ap->prevp->br_blockcount);
+ adjust = ap->offset -
+ (ap->prev.br_startoff + ap->prev.br_blockcount);
if (adjust &&
- ISVALID(ap->rval + adjust, ap->prevp->br_startblock))
- ap->rval += adjust;
+ ISVALID(ap->blkno + adjust, ap->prev.br_startblock))
+ ap->blkno += adjust;
}
/*
* If not at eof, then compare the two neighbor blocks.
@@ -2196,17 +2054,17 @@
* If there's a previous (left) block, select a requested
* start block based on it.
*/
- if (ap->prevp->br_startoff != NULLFILEOFF &&
- !isnullstartblock(ap->prevp->br_startblock) &&
- (prevbno = ap->prevp->br_startblock +
- ap->prevp->br_blockcount) &&
- ISVALID(prevbno, ap->prevp->br_startblock)) {
+ if (ap->prev.br_startoff != NULLFILEOFF &&
+ !isnullstartblock(ap->prev.br_startblock) &&
+ (prevbno = ap->prev.br_startblock +
+ ap->prev.br_blockcount) &&
+ ISVALID(prevbno, ap->prev.br_startblock)) {
/*
* Calculate gap to end of previous block.
*/
- adjust = prevdiff = ap->off -
- (ap->prevp->br_startoff +
- ap->prevp->br_blockcount);
+ adjust = prevdiff = ap->offset -
+ (ap->prev.br_startoff +
+ ap->prev.br_blockcount);
/*
* Figure the startblock based on the previous block's
* end and the gap size.
@@ -2215,9 +2073,9 @@
* allocating, or using it gives us an invalid block
* number, then just use the end of the previous block.
*/
- if (prevdiff <= XFS_ALLOC_GAP_UNITS * ap->alen &&
+ if (prevdiff <= XFS_ALLOC_GAP_UNITS * ap->length &&
ISVALID(prevbno + prevdiff,
- ap->prevp->br_startblock))
+ ap->prev.br_startblock))
prevbno += adjust;
else
prevdiff += adjust;
@@ -2238,16 +2096,16 @@
* If there's a following (right) block, select a requested
* start block based on it.
*/
- if (!isnullstartblock(ap->gotp->br_startblock)) {
+ if (!isnullstartblock(ap->got.br_startblock)) {
/*
* Calculate gap to start of next block.
*/
- adjust = gotdiff = ap->gotp->br_startoff - ap->off;
+ adjust = gotdiff = ap->got.br_startoff - ap->offset;
/*
* Figure the startblock based on the next block's
* start and the gap size.
*/
- gotbno = ap->gotp->br_startblock;
+ gotbno = ap->got.br_startblock;
/*
* Heuristic!
* If the gap is large relative to the piece we're
@@ -2255,12 +2113,12 @@
* number, then just use the start of the next block
* offset by our length.
*/
- if (gotdiff <= XFS_ALLOC_GAP_UNITS * ap->alen &&
+ if (gotdiff <= XFS_ALLOC_GAP_UNITS * ap->length &&
ISVALID(gotbno - gotdiff, gotbno))
gotbno -= adjust;
- else if (ISVALID(gotbno - ap->alen, gotbno)) {
- gotbno -= ap->alen;
- gotdiff += adjust - ap->alen;
+ else if (ISVALID(gotbno - ap->length, gotbno)) {
+ gotbno -= ap->length;
+ gotdiff += adjust - ap->length;
} else
gotdiff += adjust;
/*
@@ -2278,14 +2136,14 @@
gotbno = NULLFSBLOCK;
/*
* If both valid, pick the better one, else the only good
- * one, else ap->rval is already set (to 0 or the inode block).
+ * one, else ap->blkno is already set (to 0 or the inode block).
*/
if (prevbno != NULLFSBLOCK && gotbno != NULLFSBLOCK)
- ap->rval = prevdiff <= gotdiff ? prevbno : gotbno;
+ ap->blkno = prevdiff <= gotdiff ? prevbno : gotbno;
else if (prevbno != NULLFSBLOCK)
- ap->rval = prevbno;
+ ap->blkno = prevbno;
else if (gotbno != NULLFSBLOCK)
- ap->rval = gotbno;
+ ap->blkno = gotbno;
}
#undef ISVALID
}
@@ -2305,24 +2163,24 @@
mp = ap->ip->i_mount;
align = xfs_get_extsz_hint(ap->ip);
prod = align / mp->m_sb.sb_rextsize;
- error = xfs_bmap_extsize_align(mp, ap->gotp, ap->prevp,
+ error = xfs_bmap_extsize_align(mp, &ap->got, &ap->prev,
align, 1, ap->eof, 0,
- ap->conv, &ap->off, &ap->alen);
+ ap->conv, &ap->offset, &ap->length);
if (error)
return error;
- ASSERT(ap->alen);
- ASSERT(ap->alen % mp->m_sb.sb_rextsize == 0);
+ ASSERT(ap->length);
+ ASSERT(ap->length % mp->m_sb.sb_rextsize == 0);
/*
* If the offset & length are not perfectly aligned
* then kill prod, it will just get us in trouble.
*/
- if (do_mod(ap->off, align) || ap->alen % align)
+ if (do_mod(ap->offset, align) || ap->length % align)
prod = 1;
/*
* Set ralen to be the actual requested length in rtextents.
*/
- ralen = ap->alen / mp->m_sb.sb_rextsize;
+ ralen = ap->length / mp->m_sb.sb_rextsize;
/*
* If the old value was close enough to MAXEXTLEN that
* we rounded up to it, cut it back so it's valid again.
@@ -2337,21 +2195,21 @@
* Lock out other modifications to the RT bitmap inode.
*/
xfs_ilock(mp->m_rbmip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(ap->tp, mp->m_rbmip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(ap->tp, mp->m_rbmip, XFS_ILOCK_EXCL);
/*
* If it's an allocation to an empty file at offset 0,
* pick an extent that will space things out in the rt area.
*/
- if (ap->eof && ap->off == 0) {
+ if (ap->eof && ap->offset == 0) {
xfs_rtblock_t uninitialized_var(rtx); /* realtime extent no */
error = xfs_rtpick_extent(mp, ap->tp, ralen, &rtx);
if (error)
return error;
- ap->rval = rtx * mp->m_sb.sb_rextsize;
+ ap->blkno = rtx * mp->m_sb.sb_rextsize;
} else {
- ap->rval = 0;
+ ap->blkno = 0;
}
xfs_bmap_adjacent(ap);
@@ -2359,23 +2217,23 @@
/*
* Realtime allocation, done through xfs_rtallocate_extent.
*/
- atype = ap->rval == 0 ? XFS_ALLOCTYPE_ANY_AG : XFS_ALLOCTYPE_NEAR_BNO;
- do_div(ap->rval, mp->m_sb.sb_rextsize);
- rtb = ap->rval;
- ap->alen = ralen;
- if ((error = xfs_rtallocate_extent(ap->tp, ap->rval, 1, ap->alen,
+ atype = ap->blkno == 0 ? XFS_ALLOCTYPE_ANY_AG : XFS_ALLOCTYPE_NEAR_BNO;
+ do_div(ap->blkno, mp->m_sb.sb_rextsize);
+ rtb = ap->blkno;
+ ap->length = ralen;
+ if ((error = xfs_rtallocate_extent(ap->tp, ap->blkno, 1, ap->length,
&ralen, atype, ap->wasdel, prod, &rtb)))
return error;
if (rtb == NULLFSBLOCK && prod > 1 &&
- (error = xfs_rtallocate_extent(ap->tp, ap->rval, 1,
- ap->alen, &ralen, atype,
+ (error = xfs_rtallocate_extent(ap->tp, ap->blkno, 1,
+ ap->length, &ralen, atype,
ap->wasdel, 1, &rtb)))
return error;
- ap->rval = rtb;
- if (ap->rval != NULLFSBLOCK) {
- ap->rval *= mp->m_sb.sb_rextsize;
+ ap->blkno = rtb;
+ if (ap->blkno != NULLFSBLOCK) {
+ ap->blkno *= mp->m_sb.sb_rextsize;
ralen *= mp->m_sb.sb_rextsize;
- ap->alen = ralen;
+ ap->length = ralen;
ap->ip->i_d.di_nblocks += ralen;
xfs_trans_log_inode(ap->tp, ap->ip, XFS_ILOG_CORE);
if (ap->wasdel)
@@ -2388,7 +2246,7 @@
ap->wasdel ? XFS_TRANS_DQ_DELRTBCOUNT :
XFS_TRANS_DQ_RTBCOUNT, (long) ralen);
} else {
- ap->alen = 0;
+ ap->length = 0;
}
return 0;
}
@@ -2503,7 +2361,7 @@
* AG as the stream may have moved.
*/
if (xfs_inode_is_filestream(ap->ip))
- ap->rval = args->fsbno = XFS_AGB_TO_FSB(mp, ag, 0);
+ ap->blkno = args->fsbno = XFS_AGB_TO_FSB(mp, ag, 0);
return 0;
}
@@ -2528,52 +2386,52 @@
mp = ap->ip->i_mount;
align = ap->userdata ? xfs_get_extsz_hint(ap->ip) : 0;
if (unlikely(align)) {
- error = xfs_bmap_extsize_align(mp, ap->gotp, ap->prevp,
+ error = xfs_bmap_extsize_align(mp, &ap->got, &ap->prev,
align, 0, ap->eof, 0, ap->conv,
- &ap->off, &ap->alen);
+ &ap->offset, &ap->length);
ASSERT(!error);
- ASSERT(ap->alen);
+ ASSERT(ap->length);
}
- nullfb = ap->firstblock == NULLFSBLOCK;
- fb_agno = nullfb ? NULLAGNUMBER : XFS_FSB_TO_AGNO(mp, ap->firstblock);
+ nullfb = *ap->firstblock == NULLFSBLOCK;
+ fb_agno = nullfb ? NULLAGNUMBER : XFS_FSB_TO_AGNO(mp, *ap->firstblock);
if (nullfb) {
if (ap->userdata && xfs_inode_is_filestream(ap->ip)) {
ag = xfs_filestream_lookup_ag(ap->ip);
ag = (ag != NULLAGNUMBER) ? ag : 0;
- ap->rval = XFS_AGB_TO_FSB(mp, ag, 0);
+ ap->blkno = XFS_AGB_TO_FSB(mp, ag, 0);
} else {
- ap->rval = XFS_INO_TO_FSB(mp, ap->ip->i_ino);
+ ap->blkno = XFS_INO_TO_FSB(mp, ap->ip->i_ino);
}
} else
- ap->rval = ap->firstblock;
+ ap->blkno = *ap->firstblock;
xfs_bmap_adjacent(ap);
/*
- * If allowed, use ap->rval; otherwise must use firstblock since
+ * If allowed, use ap->blkno; otherwise must use firstblock since
* it's in the right allocation group.
*/
- if (nullfb || XFS_FSB_TO_AGNO(mp, ap->rval) == fb_agno)
+ if (nullfb || XFS_FSB_TO_AGNO(mp, ap->blkno) == fb_agno)
;
else
- ap->rval = ap->firstblock;
+ ap->blkno = *ap->firstblock;
/*
* Normal allocation, done through xfs_alloc_vextent.
*/
tryagain = isaligned = 0;
args.tp = ap->tp;
args.mp = mp;
- args.fsbno = ap->rval;
+ args.fsbno = ap->blkno;
/* Trim the allocation back to the maximum an AG can fit. */
- args.maxlen = MIN(ap->alen, XFS_ALLOC_AG_MAX_USABLE(mp));
- args.firstblock = ap->firstblock;
+ args.maxlen = MIN(ap->length, XFS_ALLOC_AG_MAX_USABLE(mp));
+ args.firstblock = *ap->firstblock;
blen = 0;
if (nullfb) {
error = xfs_bmap_btalloc_nullfb(ap, &args, &blen);
if (error)
return error;
- } else if (ap->low) {
+ } else if (ap->flist->xbf_low) {
if (xfs_inode_is_filestream(ap->ip))
args.type = XFS_ALLOCTYPE_FIRST_AG;
else
@@ -2587,14 +2445,14 @@
/* apply extent size hints if obtained earlier */
if (unlikely(align)) {
args.prod = align;
- if ((args.mod = (xfs_extlen_t)do_mod(ap->off, args.prod)))
+ if ((args.mod = (xfs_extlen_t)do_mod(ap->offset, args.prod)))
args.mod = (xfs_extlen_t)(args.prod - args.mod);
} else if (mp->m_sb.sb_blocksize >= PAGE_CACHE_SIZE) {
args.prod = 1;
args.mod = 0;
} else {
args.prod = PAGE_CACHE_SIZE >> mp->m_sb.sb_blocklog;
- if ((args.mod = (xfs_extlen_t)(do_mod(ap->off, args.prod))))
+ if ((args.mod = (xfs_extlen_t)(do_mod(ap->offset, args.prod))))
args.mod = (xfs_extlen_t)(args.prod - args.mod);
}
/*
@@ -2606,8 +2464,8 @@
* is >= the stripe unit and the allocation offset is
* at the end of file.
*/
- if (!ap->low && ap->aeof) {
- if (!ap->off) {
+ if (!ap->flist->xbf_low && ap->aeof) {
+ if (!ap->offset) {
args.alignment = mp->m_dalign;
atype = args.type;
isaligned = 1;
@@ -2660,7 +2518,7 @@
* turned on.
*/
args.type = atype;
- args.fsbno = ap->rval;
+ args.fsbno = ap->blkno;
args.alignment = mp->m_dalign;
args.minlen = nextminlen;
args.minalignslop = 0;
@@ -2674,7 +2532,7 @@
* try again.
*/
args.type = atype;
- args.fsbno = ap->rval;
+ args.fsbno = ap->blkno;
args.alignment = 0;
if ((error = xfs_alloc_vextent(&args)))
return error;
@@ -2683,7 +2541,7 @@
args.minlen > ap->minlen) {
args.minlen = ap->minlen;
args.type = XFS_ALLOCTYPE_START_BNO;
- args.fsbno = ap->rval;
+ args.fsbno = ap->blkno;
if ((error = xfs_alloc_vextent(&args)))
return error;
}
@@ -2694,13 +2552,26 @@
args.minleft = 0;
if ((error = xfs_alloc_vextent(&args)))
return error;
- ap->low = 1;
+ ap->flist->xbf_low = 1;
}
if (args.fsbno != NULLFSBLOCK) {
- ap->firstblock = ap->rval = args.fsbno;
+ /*
+ * check the allocation happened at the same or higher AG than
+ * the first block that was allocated.
+ */
+ ASSERT(*ap->firstblock == NULLFSBLOCK ||
+ XFS_FSB_TO_AGNO(mp, *ap->firstblock) ==
+ XFS_FSB_TO_AGNO(mp, args.fsbno) ||
+ (ap->flist->xbf_low &&
+ XFS_FSB_TO_AGNO(mp, *ap->firstblock) <
+ XFS_FSB_TO_AGNO(mp, args.fsbno)));
+
+ ap->blkno = args.fsbno;
+ if (*ap->firstblock == NULLFSBLOCK)
+ *ap->firstblock = args.fsbno;
ASSERT(nullfb || fb_agno == args.agno ||
- (ap->low && fb_agno < args.agno));
- ap->alen = args.len;
+ (ap->flist->xbf_low && fb_agno < args.agno));
+ ap->length = args.len;
ap->ip->i_d.di_nblocks += args.len;
xfs_trans_log_inode(ap->tp, ap->ip, XFS_ILOG_CORE);
if (ap->wasdel)
@@ -2714,8 +2585,8 @@
XFS_TRANS_DQ_BCOUNT,
(long) args.len);
} else {
- ap->rval = NULLFSBLOCK;
- ap->alen = 0;
+ ap->blkno = NULLFSBLOCK;
+ ap->length = 0;
}
return 0;
}
@@ -3589,7 +3460,7 @@
}
ASSERT(ip->i_d.di_anextents == 0);
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
switch (ip->i_d.di_format) {
@@ -3782,19 +3653,11 @@
* Routine to be called at transaction's end by xfs_bmapi, xfs_bunmapi
* caller. Frees all the extents that need freeing, which must be done
* last due to locking considerations. We never free any extents in
- * the first transaction. This is to allow the caller to make the first
- * transaction a synchronous one so that the pointers to the data being
- * broken in this transaction will be permanent before the data is actually
- * freed. This is necessary to prevent blocks from being reallocated
- * and written to before the free and reallocation are actually permanent.
- * We do not just make the first transaction synchronous here, because
- * there are more efficient ways to gain the same protection in some cases
- * (see the file truncation code).
+ * the first transaction.
*
* Return 1 if the given transaction was committed and a new one
* started, and 0 otherwise in the committed parameter.
*/
-/*ARGSUSED*/
int /* error */
xfs_bmap_finish(
xfs_trans_t **tp, /* transaction pointer addr */
@@ -3994,42 +3857,122 @@
return 0;
}
+STATIC int
+xfs_bmap_last_extent(
+ struct xfs_trans *tp,
+ struct xfs_inode *ip,
+ int whichfork,
+ struct xfs_bmbt_irec *rec,
+ int *is_empty)
+{
+ struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, whichfork);
+ int error;
+ int nextents;
+
+ if (!(ifp->if_flags & XFS_IFEXTENTS)) {
+ error = xfs_iread_extents(tp, ip, whichfork);
+ if (error)
+ return error;
+ }
+
+ nextents = ifp->if_bytes / sizeof(xfs_bmbt_rec_t);
+ if (nextents == 0) {
+ *is_empty = 1;
+ return 0;
+ }
+
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, nextents - 1), rec);
+ *is_empty = 0;
+ return 0;
+}
+
+/*
+ * Check the last inode extent to determine whether this allocation will result
+ * in blocks being allocated at the end of the file. When we allocate new data
+ * blocks at the end of the file which do not start at the previous data block,
+ * we will try to align the new blocks at stripe unit boundaries.
+ *
+ * Returns 0 in bma->aeof if the file (fork) is empty as any new write will be
+ * at, or past the EOF.
+ */
+STATIC int
+xfs_bmap_isaeof(
+ struct xfs_bmalloca *bma,
+ int whichfork)
+{
+ struct xfs_bmbt_irec rec;
+ int is_empty;
+ int error;
+
+ bma->aeof = 0;
+ error = xfs_bmap_last_extent(NULL, bma->ip, whichfork, &rec,
+ &is_empty);
+ if (error || is_empty)
+ return error;
+
+ /*
+ * Check if we are allocation or past the last extent, or at least into
+ * the last delayed allocated extent.
+ */
+ bma->aeof = bma->offset >= rec.br_startoff + rec.br_blockcount ||
+ (bma->offset >= rec.br_startoff &&
+ isnullstartblock(rec.br_startblock));
+ return 0;
+}
+
+/*
+ * Check if the endoff is outside the last extent. If so the caller will grow
+ * the allocation to a stripe unit boundary. All offsets are considered outside
+ * the end of file for an empty fork, so 1 is returned in *eof in that case.
+ */
+int
+xfs_bmap_eof(
+ struct xfs_inode *ip,
+ xfs_fileoff_t endoff,
+ int whichfork,
+ int *eof)
+{
+ struct xfs_bmbt_irec rec;
+ int error;
+
+ error = xfs_bmap_last_extent(NULL, ip, whichfork, &rec, eof);
+ if (error || *eof)
+ return error;
+
+ *eof = endoff >= rec.br_startoff + rec.br_blockcount;
+ return 0;
+}
+
/*
* Returns the file-relative block number of the first block past eof in
* the file. This is not based on i_size, it is based on the extent records.
* Returns 0 for local files, as they do not have extent records.
*/
-int /* error */
+int
xfs_bmap_last_offset(
- xfs_trans_t *tp, /* transaction pointer */
- xfs_inode_t *ip, /* incore inode */
- xfs_fileoff_t *last_block, /* last block */
- int whichfork) /* data or attr fork */
+ struct xfs_trans *tp,
+ struct xfs_inode *ip,
+ xfs_fileoff_t *last_block,
+ int whichfork)
{
- xfs_bmbt_rec_host_t *ep; /* pointer to last extent */
- int error; /* error return value */
- xfs_ifork_t *ifp; /* inode fork pointer */
- xfs_extnum_t nextents; /* number of extent entries */
+ struct xfs_bmbt_irec rec;
+ int is_empty;
+ int error;
+
+ *last_block = 0;
+
+ if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_LOCAL)
+ return 0;
if (XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE &&
- XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS &&
- XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_LOCAL)
+ XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
return XFS_ERROR(EIO);
- if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_LOCAL) {
- *last_block = 0;
- return 0;
- }
- ifp = XFS_IFORK_PTR(ip, whichfork);
- if (!(ifp->if_flags & XFS_IFEXTENTS) &&
- (error = xfs_iread_extents(tp, ip, whichfork)))
+
+ error = xfs_bmap_last_extent(NULL, ip, whichfork, &rec, &is_empty);
+ if (error || is_empty)
return error;
- nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
- if (!nextents) {
- *last_block = 0;
- return 0;
- }
- ep = xfs_iext_get_ext(ifp, nextents - 1);
- *last_block = xfs_bmbt_get_startoff(ep) + xfs_bmbt_get_blockcount(ep);
+
+ *last_block = rec.br_startoff + rec.br_blockcount;
return 0;
}
@@ -4159,7 +4102,6 @@
xfs_extnum_t num_recs;
xfs_extnum_t start;
-
num_recs = xfs_btree_get_numrecs(block);
if (unlikely(i + num_recs > room)) {
ASSERT(i + num_recs <= room);
@@ -4282,9 +4224,8 @@
ASSERT(i == 0 ||
mval[i - 1].br_startoff + mval[i - 1].br_blockcount ==
mval[i].br_startoff);
- if ((flags & XFS_BMAPI_WRITE) && !(flags & XFS_BMAPI_DELAY))
- ASSERT(mval[i].br_startblock != DELAYSTARTBLOCK &&
- mval[i].br_startblock != HOLESTARTBLOCK);
+ ASSERT(mval[i].br_startblock != DELAYSTARTBLOCK &&
+ mval[i].br_startblock != HOLESTARTBLOCK);
ASSERT(mval[i].br_state == XFS_EXT_NORM ||
mval[i].br_state == XFS_EXT_UNWRITTEN);
}
@@ -4293,399 +4234,168 @@
/*
- * Map file blocks to filesystem blocks.
- * File range is given by the bno/len pair.
- * Adds blocks to file if a write ("flags & XFS_BMAPI_WRITE" set)
- * into a hole or past eof.
- * Only allocates blocks from a single allocation group,
- * to avoid locking problems.
- * The returned value in "firstblock" from the first call in a transaction
- * must be remembered and presented to subsequent calls in "firstblock".
- * An upper bound for the number of blocks to be allocated is supplied to
- * the first call in "total"; if no allocation group has that many free
- * blocks then the call will fail (return NULLFSBLOCK in "firstblock").
+ * Trim the returned map to the required bounds
*/
-int /* error */
-xfs_bmapi(
- xfs_trans_t *tp, /* transaction pointer */
- xfs_inode_t *ip, /* incore inode */
- xfs_fileoff_t bno, /* starting file offs. mapped */
- xfs_filblks_t len, /* length to map in file */
- int flags, /* XFS_BMAPI_... */
- xfs_fsblock_t *firstblock, /* first allocated block
- controls a.g. for allocs */
- xfs_extlen_t total, /* total blocks needed */
- xfs_bmbt_irec_t *mval, /* output: map values */
- int *nmap, /* i/o: mval size/count */
- xfs_bmap_free_t *flist) /* i/o: list extents to free */
+STATIC void
+xfs_bmapi_trim_map(
+ struct xfs_bmbt_irec *mval,
+ struct xfs_bmbt_irec *got,
+ xfs_fileoff_t *bno,
+ xfs_filblks_t len,
+ xfs_fileoff_t obno,
+ xfs_fileoff_t end,
+ int n,
+ int flags)
{
- xfs_fsblock_t abno; /* allocated block number */
- xfs_extlen_t alen; /* allocated extent length */
- xfs_fileoff_t aoff; /* allocated file offset */
- xfs_bmalloca_t bma = { 0 }; /* args for xfs_bmap_alloc */
- xfs_btree_cur_t *cur; /* bmap btree cursor */
- xfs_fileoff_t end; /* end of mapped file region */
- int eof; /* we've hit the end of extents */
- xfs_bmbt_rec_host_t *ep; /* extent record pointer */
- int error; /* error return */
- xfs_bmbt_irec_t got; /* current file extent record */
- xfs_ifork_t *ifp; /* inode fork pointer */
- xfs_extlen_t indlen; /* indirect blocks length */
- xfs_extnum_t lastx; /* last useful extent number */
- int logflags; /* flags for transaction logging */
- xfs_extlen_t minleft; /* min blocks left after allocation */
- xfs_extlen_t minlen; /* min allocation size */
- xfs_mount_t *mp; /* xfs mount structure */
- int n; /* current extent index */
- int nallocs; /* number of extents alloc'd */
- xfs_extnum_t nextents; /* number of extents in file */
- xfs_fileoff_t obno; /* old block number (offset) */
- xfs_bmbt_irec_t prev; /* previous file extent record */
- int tmp_logflags; /* temp flags holder */
- int whichfork; /* data or attr fork */
- char inhole; /* current location is hole in file */
- char wasdelay; /* old extent was delayed */
- char wr; /* this is a write request */
- char rt; /* this is a realtime file */
-#ifdef DEBUG
- xfs_fileoff_t orig_bno; /* original block number value */
- int orig_flags; /* original flags arg value */
- xfs_filblks_t orig_len; /* original value of len arg */
- xfs_bmbt_irec_t *orig_mval; /* original value of mval */
- int orig_nmap; /* original value of *nmap */
+ if ((flags & XFS_BMAPI_ENTIRE) ||
+ got->br_startoff + got->br_blockcount <= obno) {
+ *mval = *got;
+ if (isnullstartblock(got->br_startblock))
+ mval->br_startblock = DELAYSTARTBLOCK;
+ return;
+ }
- orig_bno = bno;
- orig_len = len;
- orig_flags = flags;
- orig_mval = mval;
- orig_nmap = *nmap;
-#endif
+ if (obno > *bno)
+ *bno = obno;
+ ASSERT((*bno >= obno) || (n == 0));
+ ASSERT(*bno < end);
+ mval->br_startoff = *bno;
+ if (isnullstartblock(got->br_startblock))
+ mval->br_startblock = DELAYSTARTBLOCK;
+ else
+ mval->br_startblock = got->br_startblock +
+ (*bno - got->br_startoff);
+ /*
+ * Return the minimum of what we got and what we asked for for
+ * the length. We can use the len variable here because it is
+ * modified below and we could have been there before coming
+ * here if the first part of the allocation didn't overlap what
+ * was asked for.
+ */
+ mval->br_blockcount = XFS_FILBLKS_MIN(end - *bno,
+ got->br_blockcount - (*bno - got->br_startoff));
+ mval->br_state = got->br_state;
+ ASSERT(mval->br_blockcount <= len);
+ return;
+}
+
+/*
+ * Update and validate the extent map to return
+ */
+STATIC void
+xfs_bmapi_update_map(
+ struct xfs_bmbt_irec **map,
+ xfs_fileoff_t *bno,
+ xfs_filblks_t *len,
+ xfs_fileoff_t obno,
+ xfs_fileoff_t end,
+ int *n,
+ int flags)
+{
+ xfs_bmbt_irec_t *mval = *map;
+
+ ASSERT((flags & XFS_BMAPI_ENTIRE) ||
+ ((mval->br_startoff + mval->br_blockcount) <= end));
+ ASSERT((flags & XFS_BMAPI_ENTIRE) || (mval->br_blockcount <= *len) ||
+ (mval->br_startoff < obno));
+
+ *bno = mval->br_startoff + mval->br_blockcount;
+ *len = end - *bno;
+ if (*n > 0 && mval->br_startoff == mval[-1].br_startoff) {
+ /* update previous map with new information */
+ ASSERT(mval->br_startblock == mval[-1].br_startblock);
+ ASSERT(mval->br_blockcount > mval[-1].br_blockcount);
+ ASSERT(mval->br_state == mval[-1].br_state);
+ mval[-1].br_blockcount = mval->br_blockcount;
+ mval[-1].br_state = mval->br_state;
+ } else if (*n > 0 && mval->br_startblock != DELAYSTARTBLOCK &&
+ mval[-1].br_startblock != DELAYSTARTBLOCK &&
+ mval[-1].br_startblock != HOLESTARTBLOCK &&
+ mval->br_startblock == mval[-1].br_startblock +
+ mval[-1].br_blockcount &&
+ ((flags & XFS_BMAPI_IGSTATE) ||
+ mval[-1].br_state == mval->br_state)) {
+ ASSERT(mval->br_startoff ==
+ mval[-1].br_startoff + mval[-1].br_blockcount);
+ mval[-1].br_blockcount += mval->br_blockcount;
+ } else if (*n > 0 &&
+ mval->br_startblock == DELAYSTARTBLOCK &&
+ mval[-1].br_startblock == DELAYSTARTBLOCK &&
+ mval->br_startoff ==
+ mval[-1].br_startoff + mval[-1].br_blockcount) {
+ mval[-1].br_blockcount += mval->br_blockcount;
+ mval[-1].br_state = mval->br_state;
+ } else if (!((*n == 0) &&
+ ((mval->br_startoff + mval->br_blockcount) <=
+ obno))) {
+ mval++;
+ (*n)++;
+ }
+ *map = mval;
+}
+
+/*
+ * Map file blocks to filesystem blocks without allocation.
+ */
+int
+xfs_bmapi_read(
+ struct xfs_inode *ip,
+ xfs_fileoff_t bno,
+ xfs_filblks_t len,
+ struct xfs_bmbt_irec *mval,
+ int *nmap,
+ int flags)
+{
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_ifork *ifp;
+ struct xfs_bmbt_irec got;
+ struct xfs_bmbt_irec prev;
+ xfs_fileoff_t obno;
+ xfs_fileoff_t end;
+ xfs_extnum_t lastx;
+ int error;
+ int eof;
+ int n = 0;
+ int whichfork = (flags & XFS_BMAPI_ATTRFORK) ?
+ XFS_ATTR_FORK : XFS_DATA_FORK;
+
ASSERT(*nmap >= 1);
- ASSERT(*nmap <= XFS_BMAP_MAX_NMAP || !(flags & XFS_BMAPI_WRITE));
- whichfork = (flags & XFS_BMAPI_ATTRFORK) ?
- XFS_ATTR_FORK : XFS_DATA_FORK;
- mp = ip->i_mount;
+ ASSERT(!(flags & ~(XFS_BMAPI_ATTRFORK|XFS_BMAPI_ENTIRE|
+ XFS_BMAPI_IGSTATE)));
+
if (unlikely(XFS_TEST_ERROR(
(XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS &&
- XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE &&
- XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_LOCAL),
+ XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE),
mp, XFS_ERRTAG_BMAPIFORMAT, XFS_RANDOM_BMAPIFORMAT))) {
- XFS_ERROR_REPORT("xfs_bmapi", XFS_ERRLEVEL_LOW, mp);
+ XFS_ERROR_REPORT("xfs_bmapi_read", XFS_ERRLEVEL_LOW, mp);
return XFS_ERROR(EFSCORRUPTED);
}
+
if (XFS_FORCED_SHUTDOWN(mp))
return XFS_ERROR(EIO);
- rt = (whichfork == XFS_DATA_FORK) && XFS_IS_REALTIME_INODE(ip);
+
+ XFS_STATS_INC(xs_blk_mapr);
+
ifp = XFS_IFORK_PTR(ip, whichfork);
ASSERT(ifp->if_ext_max ==
XFS_IFORK_SIZE(ip, whichfork) / (uint)sizeof(xfs_bmbt_rec_t));
- if ((wr = (flags & XFS_BMAPI_WRITE)) != 0)
- XFS_STATS_INC(xs_blk_mapw);
- else
- XFS_STATS_INC(xs_blk_mapr);
- /*
- * IGSTATE flag is used to combine extents which
- * differ only due to the state of the extents.
- * This technique is used from xfs_getbmap()
- * when the caller does not wish to see the
- * separation (which is the default).
- *
- * This technique is also used when writing a
- * buffer which has been partially written,
- * (usually by being flushed during a chunkread),
- * to ensure one write takes place. This also
- * prevents a change in the xfs inode extents at
- * this time, intentionally. This change occurs
- * on completion of the write operation, in
- * xfs_strat_comp(), where the xfs_bmapi() call
- * is transactioned, and the extents combined.
- */
- if ((flags & XFS_BMAPI_IGSTATE) && wr) /* if writing unwritten space */
- wr = 0; /* no allocations are allowed */
- ASSERT(wr || !(flags & XFS_BMAPI_DELAY));
- logflags = 0;
- nallocs = 0;
- cur = NULL;
- if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_LOCAL) {
- ASSERT(wr && tp);
- if ((error = xfs_bmap_local_to_extents(tp, ip,
- firstblock, total, &logflags, whichfork)))
- goto error0;
+
+ if (!(ifp->if_flags & XFS_IFEXTENTS)) {
+ error = xfs_iread_extents(NULL, ip, whichfork);
+ if (error)
+ return error;
}
- if (wr && *firstblock == NULLFSBLOCK) {
- if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_BTREE)
- minleft = be16_to_cpu(ifp->if_broot->bb_level) + 1;
- else
- minleft = 1;
- } else
- minleft = 0;
- if (!(ifp->if_flags & XFS_IFEXTENTS) &&
- (error = xfs_iread_extents(tp, ip, whichfork)))
- goto error0;
- ep = xfs_bmap_search_extents(ip, bno, whichfork, &eof, &lastx, &got,
- &prev);
- nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
- n = 0;
+
+ xfs_bmap_search_extents(ip, bno, whichfork, &eof, &lastx, &got, &prev);
end = bno + len;
obno = bno;
- bma.ip = NULL;
while (bno < end && n < *nmap) {
- /*
- * Reading past eof, act as though there's a hole
- * up to end.
- */
- if (eof && !wr)
+ /* Reading past eof, act as though there's a hole up to end. */
+ if (eof)
got.br_startoff = end;
- inhole = eof || got.br_startoff > bno;
- wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) &&
- isnullstartblock(got.br_startblock);
- /*
- * First, deal with the hole before the allocated space
- * that we found, if any.
- */
- if (wr && (inhole || wasdelay)) {
- /*
- * For the wasdelay case, we could also just
- * allocate the stuff asked for in this bmap call
- * but that wouldn't be as good.
- */
- if (wasdelay) {
- alen = (xfs_extlen_t)got.br_blockcount;
- aoff = got.br_startoff;
- if (lastx != NULLEXTNUM && lastx) {
- ep = xfs_iext_get_ext(ifp, lastx - 1);
- xfs_bmbt_get_all(ep, &prev);
- }
- } else {
- alen = (xfs_extlen_t)
- XFS_FILBLKS_MIN(len, MAXEXTLEN);
- if (!eof)
- alen = (xfs_extlen_t)
- XFS_FILBLKS_MIN(alen,
- got.br_startoff - bno);
- aoff = bno;
- }
- minlen = (flags & XFS_BMAPI_CONTIG) ? alen : 1;
- if (flags & XFS_BMAPI_DELAY) {
- xfs_extlen_t extsz;
-
- /* Figure out the extent size, adjust alen */
- extsz = xfs_get_extsz_hint(ip);
- if (extsz) {
- /*
- * make sure we don't exceed a single
- * extent length when we align the
- * extent by reducing length we are
- * going to allocate by the maximum
- * amount extent size aligment may
- * require.
- */
- alen = XFS_FILBLKS_MIN(len,
- MAXEXTLEN - (2 * extsz - 1));
- error = xfs_bmap_extsize_align(mp,
- &got, &prev, extsz,
- rt, eof,
- flags&XFS_BMAPI_DELAY,
- flags&XFS_BMAPI_CONVERT,
- &aoff, &alen);
- ASSERT(!error);
- }
-
- if (rt)
- extsz = alen / mp->m_sb.sb_rextsize;
-
- /*
- * Make a transaction-less quota reservation for
- * delayed allocation blocks. This number gets
- * adjusted later. We return if we haven't
- * allocated blocks already inside this loop.
- */
- error = xfs_trans_reserve_quota_nblks(
- NULL, ip, (long)alen, 0,
- rt ? XFS_QMOPT_RES_RTBLKS :
- XFS_QMOPT_RES_REGBLKS);
- if (error) {
- if (n == 0) {
- *nmap = 0;
- ASSERT(cur == NULL);
- return error;
- }
- break;
- }
-
- /*
- * Split changing sb for alen and indlen since
- * they could be coming from different places.
- */
- indlen = (xfs_extlen_t)
- xfs_bmap_worst_indlen(ip, alen);
- ASSERT(indlen > 0);
-
- if (rt) {
- error = xfs_mod_incore_sb(mp,
- XFS_SBS_FREXTENTS,
- -((int64_t)extsz), 0);
- } else {
- error = xfs_icsb_modify_counters(mp,
- XFS_SBS_FDBLOCKS,
- -((int64_t)alen), 0);
- }
- if (!error) {
- error = xfs_icsb_modify_counters(mp,
- XFS_SBS_FDBLOCKS,
- -((int64_t)indlen), 0);
- if (error && rt)
- xfs_mod_incore_sb(mp,
- XFS_SBS_FREXTENTS,
- (int64_t)extsz, 0);
- else if (error)
- xfs_icsb_modify_counters(mp,
- XFS_SBS_FDBLOCKS,
- (int64_t)alen, 0);
- }
-
- if (error) {
- if (XFS_IS_QUOTA_ON(mp))
- /* unreserve the blocks now */
- (void)
- xfs_trans_unreserve_quota_nblks(
- NULL, ip,
- (long)alen, 0, rt ?
- XFS_QMOPT_RES_RTBLKS :
- XFS_QMOPT_RES_REGBLKS);
- break;
- }
-
- ip->i_delayed_blks += alen;
- abno = nullstartblock(indlen);
- } else {
- /*
- * If first time, allocate and fill in
- * once-only bma fields.
- */
- if (bma.ip == NULL) {
- bma.tp = tp;
- bma.ip = ip;
- bma.prevp = &prev;
- bma.gotp = &got;
- bma.total = total;
- bma.userdata = 0;
- }
- /* Indicate if this is the first user data
- * in the file, or just any user data.
- */
- if (!(flags & XFS_BMAPI_METADATA)) {
- bma.userdata = (aoff == 0) ?
- XFS_ALLOC_INITIAL_USER_DATA :
- XFS_ALLOC_USERDATA;
- }
- /*
- * Fill in changeable bma fields.
- */
- bma.eof = eof;
- bma.firstblock = *firstblock;
- bma.alen = alen;
- bma.off = aoff;
- bma.conv = !!(flags & XFS_BMAPI_CONVERT);
- bma.wasdel = wasdelay;
- bma.minlen = minlen;
- bma.low = flist->xbf_low;
- bma.minleft = minleft;
- /*
- * Only want to do the alignment at the
- * eof if it is userdata and allocation length
- * is larger than a stripe unit.
- */
- if (mp->m_dalign && alen >= mp->m_dalign &&
- (!(flags & XFS_BMAPI_METADATA)) &&
- (whichfork == XFS_DATA_FORK)) {
- if ((error = xfs_bmap_isaeof(ip, aoff,
- whichfork, &bma.aeof)))
- goto error0;
- } else
- bma.aeof = 0;
- /*
- * Call allocator.
- */
- if ((error = xfs_bmap_alloc(&bma)))
- goto error0;
- /*
- * Copy out result fields.
- */
- abno = bma.rval;
- if ((flist->xbf_low = bma.low))
- minleft = 0;
- alen = bma.alen;
- aoff = bma.off;
- ASSERT(*firstblock == NULLFSBLOCK ||
- XFS_FSB_TO_AGNO(mp, *firstblock) ==
- XFS_FSB_TO_AGNO(mp, bma.firstblock) ||
- (flist->xbf_low &&
- XFS_FSB_TO_AGNO(mp, *firstblock) <
- XFS_FSB_TO_AGNO(mp, bma.firstblock)));
- *firstblock = bma.firstblock;
- if (cur)
- cur->bc_private.b.firstblock =
- *firstblock;
- if (abno == NULLFSBLOCK)
- break;
- if ((ifp->if_flags & XFS_IFBROOT) && !cur) {
- cur = xfs_bmbt_init_cursor(mp, tp,
- ip, whichfork);
- cur->bc_private.b.firstblock =
- *firstblock;
- cur->bc_private.b.flist = flist;
- }
- /*
- * Bump the number of extents we've allocated
- * in this call.
- */
- nallocs++;
- }
- if (cur)
- cur->bc_private.b.flags =
- wasdelay ? XFS_BTCUR_BPRV_WASDEL : 0;
- got.br_startoff = aoff;
- got.br_startblock = abno;
- got.br_blockcount = alen;
- got.br_state = XFS_EXT_NORM; /* assume normal */
- /*
- * Determine state of extent, and the filesystem.
- * A wasdelay extent has been initialized, so
- * shouldn't be flagged as unwritten.
- */
- if (wr && xfs_sb_version_hasextflgbit(&mp->m_sb)) {
- if (!wasdelay && (flags & XFS_BMAPI_PREALLOC))
- got.br_state = XFS_EXT_UNWRITTEN;
- }
- error = xfs_bmap_add_extent(tp, ip, &lastx, &cur, &got,
- firstblock, flist, &tmp_logflags,
- whichfork);
- logflags |= tmp_logflags;
- if (error)
- goto error0;
- ep = xfs_iext_get_ext(ifp, lastx);
- nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
- xfs_bmbt_get_all(ep, &got);
- ASSERT(got.br_startoff <= aoff);
- ASSERT(got.br_startoff + got.br_blockcount >=
- aoff + alen);
-#ifdef DEBUG
- if (flags & XFS_BMAPI_DELAY) {
- ASSERT(isnullstartblock(got.br_startblock));
- ASSERT(startblockval(got.br_startblock) > 0);
- }
- ASSERT(got.br_state == XFS_EXT_NORM ||
- got.br_state == XFS_EXT_UNWRITTEN);
-#endif
- /*
- * Fall down into the found allocated space case.
- */
- } else if (inhole) {
- /*
- * Reading in a hole.
- */
+ if (got.br_startoff > bno) {
+ /* Reading in a hole. */
mval->br_startoff = bno;
mval->br_startblock = HOLESTARTBLOCK;
mval->br_blockcount =
@@ -4697,151 +4407,570 @@
n++;
continue;
}
+
+ /* set up the extent map to return. */
+ xfs_bmapi_trim_map(mval, &got, &bno, len, obno, end, n, flags);
+ xfs_bmapi_update_map(&mval, &bno, &len, obno, end, &n, flags);
+
+ /* If we're done, stop now. */
+ if (bno >= end || n >= *nmap)
+ break;
+
+ /* Else go on to the next record. */
+ if (++lastx < ifp->if_bytes / sizeof(xfs_bmbt_rec_t))
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, lastx), &got);
+ else
+ eof = 1;
+ }
+ *nmap = n;
+ return 0;
+}
+
+STATIC int
+xfs_bmapi_reserve_delalloc(
+ struct xfs_inode *ip,
+ xfs_fileoff_t aoff,
+ xfs_filblks_t len,
+ struct xfs_bmbt_irec *got,
+ struct xfs_bmbt_irec *prev,
+ xfs_extnum_t *lastx,
+ int eof)
+{
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
+ xfs_extlen_t alen;
+ xfs_extlen_t indlen;
+ char rt = XFS_IS_REALTIME_INODE(ip);
+ xfs_extlen_t extsz;
+ int error;
+
+ alen = XFS_FILBLKS_MIN(len, MAXEXTLEN);
+ if (!eof)
+ alen = XFS_FILBLKS_MIN(alen, got->br_startoff - aoff);
+
+ /* Figure out the extent size, adjust alen */
+ extsz = xfs_get_extsz_hint(ip);
+ if (extsz) {
/*
- * Then deal with the allocated space we found.
+ * Make sure we don't exceed a single extent length when we
+ * align the extent by reducing length we are going to
+ * allocate by the maximum amount extent size aligment may
+ * require.
*/
- ASSERT(ep != NULL);
- if (!(flags & XFS_BMAPI_ENTIRE) &&
- (got.br_startoff + got.br_blockcount > obno)) {
- if (obno > bno)
- bno = obno;
- ASSERT((bno >= obno) || (n == 0));
- ASSERT(bno < end);
- mval->br_startoff = bno;
- if (isnullstartblock(got.br_startblock)) {
- ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
- mval->br_startblock = DELAYSTARTBLOCK;
- } else
- mval->br_startblock =
- got.br_startblock +
- (bno - got.br_startoff);
- /*
- * Return the minimum of what we got and what we
- * asked for for the length. We can use the len
- * variable here because it is modified below
- * and we could have been there before coming
- * here if the first part of the allocation
- * didn't overlap what was asked for.
- */
- mval->br_blockcount =
- XFS_FILBLKS_MIN(end - bno, got.br_blockcount -
- (bno - got.br_startoff));
- mval->br_state = got.br_state;
- ASSERT(mval->br_blockcount <= len);
- } else {
- *mval = got;
- if (isnullstartblock(mval->br_startblock)) {
- ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
- mval->br_startblock = DELAYSTARTBLOCK;
+ alen = XFS_FILBLKS_MIN(len, MAXEXTLEN - (2 * extsz - 1));
+ error = xfs_bmap_extsize_align(mp, got, prev, extsz, rt, eof,
+ 1, 0, &aoff, &alen);
+ ASSERT(!error);
+ }
+
+ if (rt)
+ extsz = alen / mp->m_sb.sb_rextsize;
+
+ /*
+ * Make a transaction-less quota reservation for delayed allocation
+ * blocks. This number gets adjusted later. We return if we haven't
+ * allocated blocks already inside this loop.
+ */
+ error = xfs_trans_reserve_quota_nblks(NULL, ip, (long)alen, 0,
+ rt ? XFS_QMOPT_RES_RTBLKS : XFS_QMOPT_RES_REGBLKS);
+ if (error)
+ return error;
+
+ /*
+ * Split changing sb for alen and indlen since they could be coming
+ * from different places.
+ */
+ indlen = (xfs_extlen_t)xfs_bmap_worst_indlen(ip, alen);
+ ASSERT(indlen > 0);
+
+ if (rt) {
+ error = xfs_mod_incore_sb(mp, XFS_SBS_FREXTENTS,
+ -((int64_t)extsz), 0);
+ } else {
+ error = xfs_icsb_modify_counters(mp, XFS_SBS_FDBLOCKS,
+ -((int64_t)alen), 0);
+ }
+
+ if (error)
+ goto out_unreserve_quota;
+
+ error = xfs_icsb_modify_counters(mp, XFS_SBS_FDBLOCKS,
+ -((int64_t)indlen), 0);
+ if (error)
+ goto out_unreserve_blocks;
+
+
+ ip->i_delayed_blks += alen;
+
+ got->br_startoff = aoff;
+ got->br_startblock = nullstartblock(indlen);
+ got->br_blockcount = alen;
+ got->br_state = XFS_EXT_NORM;
+ xfs_bmap_add_extent_hole_delay(ip, lastx, got);
+
+ /*
+ * Update our extent pointer, given that xfs_bmap_add_extent_hole_delay
+ * might have merged it into one of the neighbouring ones.
+ */
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, *lastx), got);
+
+ ASSERT(got->br_startoff <= aoff);
+ ASSERT(got->br_startoff + got->br_blockcount >= aoff + alen);
+ ASSERT(isnullstartblock(got->br_startblock));
+ ASSERT(got->br_state == XFS_EXT_NORM);
+ return 0;
+
+out_unreserve_blocks:
+ if (rt)
+ xfs_mod_incore_sb(mp, XFS_SBS_FREXTENTS, extsz, 0);
+ else
+ xfs_icsb_modify_counters(mp, XFS_SBS_FDBLOCKS, alen, 0);
+out_unreserve_quota:
+ if (XFS_IS_QUOTA_ON(mp))
+ xfs_trans_unreserve_quota_nblks(NULL, ip, alen, 0, rt ?
+ XFS_QMOPT_RES_RTBLKS : XFS_QMOPT_RES_REGBLKS);
+ return error;
+}
+
+/*
+ * Map file blocks to filesystem blocks, adding delayed allocations as needed.
+ */
+int
+xfs_bmapi_delay(
+ struct xfs_inode *ip, /* incore inode */
+ xfs_fileoff_t bno, /* starting file offs. mapped */
+ xfs_filblks_t len, /* length to map in file */
+ struct xfs_bmbt_irec *mval, /* output: map values */
+ int *nmap, /* i/o: mval size/count */
+ int flags) /* XFS_BMAPI_... */
+{
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
+ struct xfs_bmbt_irec got; /* current file extent record */
+ struct xfs_bmbt_irec prev; /* previous file extent record */
+ xfs_fileoff_t obno; /* old block number (offset) */
+ xfs_fileoff_t end; /* end of mapped file region */
+ xfs_extnum_t lastx; /* last useful extent number */
+ int eof; /* we've hit the end of extents */
+ int n = 0; /* current extent index */
+ int error = 0;
+
+ ASSERT(*nmap >= 1);
+ ASSERT(*nmap <= XFS_BMAP_MAX_NMAP);
+ ASSERT(!(flags & ~XFS_BMAPI_ENTIRE));
+
+ if (unlikely(XFS_TEST_ERROR(
+ (XFS_IFORK_FORMAT(ip, XFS_DATA_FORK) != XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_FORMAT(ip, XFS_DATA_FORK) != XFS_DINODE_FMT_BTREE),
+ mp, XFS_ERRTAG_BMAPIFORMAT, XFS_RANDOM_BMAPIFORMAT))) {
+ XFS_ERROR_REPORT("xfs_bmapi_delay", XFS_ERRLEVEL_LOW, mp);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+
+ if (XFS_FORCED_SHUTDOWN(mp))
+ return XFS_ERROR(EIO);
+
+ XFS_STATS_INC(xs_blk_mapw);
+
+ if (!(ifp->if_flags & XFS_IFEXTENTS)) {
+ error = xfs_iread_extents(NULL, ip, XFS_DATA_FORK);
+ if (error)
+ return error;
+ }
+
+ xfs_bmap_search_extents(ip, bno, XFS_DATA_FORK, &eof, &lastx, &got, &prev);
+ end = bno + len;
+ obno = bno;
+
+ while (bno < end && n < *nmap) {
+ if (eof || got.br_startoff > bno) {
+ error = xfs_bmapi_reserve_delalloc(ip, bno, len, &got,
+ &prev, &lastx, eof);
+ if (error) {
+ if (n == 0) {
+ *nmap = 0;
+ return error;
+ }
+ break;
}
}
+ /* set up the extent map to return. */
+ xfs_bmapi_trim_map(mval, &got, &bno, len, obno, end, n, flags);
+ xfs_bmapi_update_map(&mval, &bno, &len, obno, end, &n, flags);
+
+ /* If we're done, stop now. */
+ if (bno >= end || n >= *nmap)
+ break;
+
+ /* Else go on to the next record. */
+ prev = got;
+ if (++lastx < ifp->if_bytes / sizeof(xfs_bmbt_rec_t))
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, lastx), &got);
+ else
+ eof = 1;
+ }
+
+ *nmap = n;
+ return 0;
+}
+
+
+STATIC int
+xfs_bmapi_allocate(
+ struct xfs_bmalloca *bma,
+ int flags)
+{
+ struct xfs_mount *mp = bma->ip->i_mount;
+ int whichfork = (flags & XFS_BMAPI_ATTRFORK) ?
+ XFS_ATTR_FORK : XFS_DATA_FORK;
+ struct xfs_ifork *ifp = XFS_IFORK_PTR(bma->ip, whichfork);
+ int tmp_logflags = 0;
+ int error;
+ int rt;
+
+ rt = (whichfork == XFS_DATA_FORK) && XFS_IS_REALTIME_INODE(bma->ip);
+
+ /*
+ * For the wasdelay case, we could also just allocate the stuff asked
+ * for in this bmap call but that wouldn't be as good.
+ */
+ if (bma->wasdel) {
+ bma->length = (xfs_extlen_t)bma->got.br_blockcount;
+ bma->offset = bma->got.br_startoff;
+ if (bma->idx != NULLEXTNUM && bma->idx) {
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma->idx - 1),
+ &bma->prev);
+ }
+ } else {
+ bma->length = XFS_FILBLKS_MIN(bma->length, MAXEXTLEN);
+ if (!bma->eof)
+ bma->length = XFS_FILBLKS_MIN(bma->length,
+ bma->got.br_startoff - bma->offset);
+ }
+
+ /*
+ * Indicate if this is the first user data in the file, or just any
+ * user data.
+ */
+ if (!(flags & XFS_BMAPI_METADATA)) {
+ bma->userdata = (bma->offset == 0) ?
+ XFS_ALLOC_INITIAL_USER_DATA : XFS_ALLOC_USERDATA;
+ }
+
+ bma->minlen = (flags & XFS_BMAPI_CONTIG) ? bma->length : 1;
+
+ /*
+ * Only want to do the alignment at the eof if it is userdata and
+ * allocation length is larger than a stripe unit.
+ */
+ if (mp->m_dalign && bma->length >= mp->m_dalign &&
+ !(flags & XFS_BMAPI_METADATA) && whichfork == XFS_DATA_FORK) {
+ error = xfs_bmap_isaeof(bma, whichfork);
+ if (error)
+ return error;
+ }
+
+ error = xfs_bmap_alloc(bma);
+ if (error)
+ return error;
+
+ if (bma->flist->xbf_low)
+ bma->minleft = 0;
+ if (bma->cur)
+ bma->cur->bc_private.b.firstblock = *bma->firstblock;
+ if (bma->blkno == NULLFSBLOCK)
+ return 0;
+ if ((ifp->if_flags & XFS_IFBROOT) && !bma->cur) {
+ bma->cur = xfs_bmbt_init_cursor(mp, bma->tp, bma->ip, whichfork);
+ bma->cur->bc_private.b.firstblock = *bma->firstblock;
+ bma->cur->bc_private.b.flist = bma->flist;
+ }
+ /*
+ * Bump the number of extents we've allocated
+ * in this call.
+ */
+ bma->nallocs++;
+
+ if (bma->cur)
+ bma->cur->bc_private.b.flags =
+ bma->wasdel ? XFS_BTCUR_BPRV_WASDEL : 0;
+
+ bma->got.br_startoff = bma->offset;
+ bma->got.br_startblock = bma->blkno;
+ bma->got.br_blockcount = bma->length;
+ bma->got.br_state = XFS_EXT_NORM;
+
+ /*
+ * A wasdelay extent has been initialized, so shouldn't be flagged
+ * as unwritten.
+ */
+ if (!bma->wasdel && (flags & XFS_BMAPI_PREALLOC) &&
+ xfs_sb_version_hasextflgbit(&mp->m_sb))
+ bma->got.br_state = XFS_EXT_UNWRITTEN;
+
+ if (bma->wasdel)
+ error = xfs_bmap_add_extent_delay_real(bma);
+ else
+ error = xfs_bmap_add_extent_hole_real(bma, whichfork);
+
+ bma->logflags |= tmp_logflags;
+ if (error)
+ return error;
+
+ /*
+ * Update our extent pointer, given that xfs_bmap_add_extent_delay_real
+ * or xfs_bmap_add_extent_hole_real might have merged it into one of
+ * the neighbouring ones.
+ */
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma->idx), &bma->got);
+
+ ASSERT(bma->got.br_startoff <= bma->offset);
+ ASSERT(bma->got.br_startoff + bma->got.br_blockcount >=
+ bma->offset + bma->length);
+ ASSERT(bma->got.br_state == XFS_EXT_NORM ||
+ bma->got.br_state == XFS_EXT_UNWRITTEN);
+ return 0;
+}
+
+STATIC int
+xfs_bmapi_convert_unwritten(
+ struct xfs_bmalloca *bma,
+ struct xfs_bmbt_irec *mval,
+ xfs_filblks_t len,
+ int flags)
+{
+ int whichfork = (flags & XFS_BMAPI_ATTRFORK) ?
+ XFS_ATTR_FORK : XFS_DATA_FORK;
+ struct xfs_ifork *ifp = XFS_IFORK_PTR(bma->ip, whichfork);
+ int tmp_logflags = 0;
+ int error;
+
+ /* check if we need to do unwritten->real conversion */
+ if (mval->br_state == XFS_EXT_UNWRITTEN &&
+ (flags & XFS_BMAPI_PREALLOC))
+ return 0;
+
+ /* check if we need to do real->unwritten conversion */
+ if (mval->br_state == XFS_EXT_NORM &&
+ (flags & (XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT)) !=
+ (XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT))
+ return 0;
+
+ /*
+ * Modify (by adding) the state flag, if writing.
+ */
+ ASSERT(mval->br_blockcount <= len);
+ if ((ifp->if_flags & XFS_IFBROOT) && !bma->cur) {
+ bma->cur = xfs_bmbt_init_cursor(bma->ip->i_mount, bma->tp,
+ bma->ip, whichfork);
+ bma->cur->bc_private.b.firstblock = *bma->firstblock;
+ bma->cur->bc_private.b.flist = bma->flist;
+ }
+ mval->br_state = (mval->br_state == XFS_EXT_UNWRITTEN)
+ ? XFS_EXT_NORM : XFS_EXT_UNWRITTEN;
+
+ error = xfs_bmap_add_extent_unwritten_real(bma->tp, bma->ip, &bma->idx,
+ &bma->cur, mval, bma->firstblock, bma->flist,
+ &tmp_logflags);
+ bma->logflags |= tmp_logflags;
+ if (error)
+ return error;
+
+ /*
+ * Update our extent pointer, given that
+ * xfs_bmap_add_extent_unwritten_real might have merged it into one
+ * of the neighbouring ones.
+ */
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma->idx), &bma->got);
+
+ /*
+ * We may have combined previously unwritten space with written space,
+ * so generate another request.
+ */
+ if (mval->br_blockcount < len)
+ return EAGAIN;
+ return 0;
+}
+
+/*
+ * Map file blocks to filesystem blocks, and allocate blocks or convert the
+ * extent state if necessary. Details behaviour is controlled by the flags
+ * parameter. Only allocates blocks from a single allocation group, to avoid
+ * locking problems.
+ *
+ * The returned value in "firstblock" from the first call in a transaction
+ * must be remembered and presented to subsequent calls in "firstblock".
+ * An upper bound for the number of blocks to be allocated is supplied to
+ * the first call in "total"; if no allocation group has that many free
+ * blocks then the call will fail (return NULLFSBLOCK in "firstblock").
+ */
+int
+xfs_bmapi_write(
+ struct xfs_trans *tp, /* transaction pointer */
+ struct xfs_inode *ip, /* incore inode */
+ xfs_fileoff_t bno, /* starting file offs. mapped */
+ xfs_filblks_t len, /* length to map in file */
+ int flags, /* XFS_BMAPI_... */
+ xfs_fsblock_t *firstblock, /* first allocated block
+ controls a.g. for allocs */
+ xfs_extlen_t total, /* total blocks needed */
+ struct xfs_bmbt_irec *mval, /* output: map values */
+ int *nmap, /* i/o: mval size/count */
+ struct xfs_bmap_free *flist) /* i/o: list extents to free */
+{
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_ifork *ifp;
+ struct xfs_bmalloca bma = { 0 }; /* args for xfs_bmap_alloc */
+ xfs_fileoff_t end; /* end of mapped file region */
+ int eof; /* after the end of extents */
+ int error; /* error return */
+ int n; /* current extent index */
+ xfs_fileoff_t obno; /* old block number (offset) */
+ int whichfork; /* data or attr fork */
+ char inhole; /* current location is hole in file */
+ char wasdelay; /* old extent was delayed */
+
+#ifdef DEBUG
+ xfs_fileoff_t orig_bno; /* original block number value */
+ int orig_flags; /* original flags arg value */
+ xfs_filblks_t orig_len; /* original value of len arg */
+ struct xfs_bmbt_irec *orig_mval; /* original value of mval */
+ int orig_nmap; /* original value of *nmap */
+
+ orig_bno = bno;
+ orig_len = len;
+ orig_flags = flags;
+ orig_mval = mval;
+ orig_nmap = *nmap;
+#endif
+
+ ASSERT(*nmap >= 1);
+ ASSERT(*nmap <= XFS_BMAP_MAX_NMAP);
+ ASSERT(!(flags & XFS_BMAPI_IGSTATE));
+ ASSERT(tp != NULL);
+
+ whichfork = (flags & XFS_BMAPI_ATTRFORK) ?
+ XFS_ATTR_FORK : XFS_DATA_FORK;
+
+ if (unlikely(XFS_TEST_ERROR(
+ (XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE &&
+ XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_LOCAL),
+ mp, XFS_ERRTAG_BMAPIFORMAT, XFS_RANDOM_BMAPIFORMAT))) {
+ XFS_ERROR_REPORT("xfs_bmapi_write", XFS_ERRLEVEL_LOW, mp);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+
+ if (XFS_FORCED_SHUTDOWN(mp))
+ return XFS_ERROR(EIO);
+
+ ifp = XFS_IFORK_PTR(ip, whichfork);
+ ASSERT(ifp->if_ext_max ==
+ XFS_IFORK_SIZE(ip, whichfork) / (uint)sizeof(xfs_bmbt_rec_t));
+
+ XFS_STATS_INC(xs_blk_mapw);
+
+ if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_LOCAL) {
+ error = xfs_bmap_local_to_extents(tp, ip, firstblock, total,
+ &bma.logflags, whichfork);
+ if (error)
+ goto error0;
+ }
+
+ if (*firstblock == NULLFSBLOCK) {
+ if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_BTREE)
+ bma.minleft = be16_to_cpu(ifp->if_broot->bb_level) + 1;
+ else
+ bma.minleft = 1;
+ } else {
+ bma.minleft = 0;
+ }
+
+ if (!(ifp->if_flags & XFS_IFEXTENTS)) {
+ error = xfs_iread_extents(tp, ip, whichfork);
+ if (error)
+ goto error0;
+ }
+
+ xfs_bmap_search_extents(ip, bno, whichfork, &eof, &bma.idx, &bma.got,
+ &bma.prev);
+ n = 0;
+ end = bno + len;
+ obno = bno;
+
+ bma.tp = tp;
+ bma.ip = ip;
+ bma.total = total;
+ bma.userdata = 0;
+ bma.flist = flist;
+ bma.firstblock = firstblock;
+
+ while (bno < end && n < *nmap) {
+ inhole = eof || bma.got.br_startoff > bno;
+ wasdelay = !inhole && isnullstartblock(bma.got.br_startblock);
+
/*
- * Check if writing previously allocated but
- * unwritten extents.
+ * First, deal with the hole before the allocated space
+ * that we found, if any.
*/
- if (wr &&
- ((mval->br_state == XFS_EXT_UNWRITTEN &&
- ((flags & (XFS_BMAPI_PREALLOC|XFS_BMAPI_DELAY)) == 0)) ||
- (mval->br_state == XFS_EXT_NORM &&
- ((flags & (XFS_BMAPI_PREALLOC|XFS_BMAPI_CONVERT)) ==
- (XFS_BMAPI_PREALLOC|XFS_BMAPI_CONVERT))))) {
- /*
- * Modify (by adding) the state flag, if writing.
- */
- ASSERT(mval->br_blockcount <= len);
- if ((ifp->if_flags & XFS_IFBROOT) && !cur) {
- cur = xfs_bmbt_init_cursor(mp,
- tp, ip, whichfork);
- cur->bc_private.b.firstblock =
- *firstblock;
- cur->bc_private.b.flist = flist;
- }
- mval->br_state = (mval->br_state == XFS_EXT_UNWRITTEN)
- ? XFS_EXT_NORM
- : XFS_EXT_UNWRITTEN;
- error = xfs_bmap_add_extent(tp, ip, &lastx, &cur, mval,
- firstblock, flist, &tmp_logflags,
- whichfork);
- logflags |= tmp_logflags;
+ if (inhole || wasdelay) {
+ bma.eof = eof;
+ bma.conv = !!(flags & XFS_BMAPI_CONVERT);
+ bma.wasdel = wasdelay;
+ bma.length = len;
+ bma.offset = bno;
+
+ error = xfs_bmapi_allocate(&bma, flags);
if (error)
goto error0;
- ep = xfs_iext_get_ext(ifp, lastx);
- nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
- xfs_bmbt_get_all(ep, &got);
- /*
- * We may have combined previously unwritten
- * space with written space, so generate
- * another request.
- */
- if (mval->br_blockcount < len)
- continue;
+ if (bma.blkno == NULLFSBLOCK)
+ break;
}
- ASSERT((flags & XFS_BMAPI_ENTIRE) ||
- ((mval->br_startoff + mval->br_blockcount) <= end));
- ASSERT((flags & XFS_BMAPI_ENTIRE) ||
- (mval->br_blockcount <= len) ||
- (mval->br_startoff < obno));
- bno = mval->br_startoff + mval->br_blockcount;
- len = end - bno;
- if (n > 0 && mval->br_startoff == mval[-1].br_startoff) {
- ASSERT(mval->br_startblock == mval[-1].br_startblock);
- ASSERT(mval->br_blockcount > mval[-1].br_blockcount);
- ASSERT(mval->br_state == mval[-1].br_state);
- mval[-1].br_blockcount = mval->br_blockcount;
- mval[-1].br_state = mval->br_state;
- } else if (n > 0 && mval->br_startblock != DELAYSTARTBLOCK &&
- mval[-1].br_startblock != DELAYSTARTBLOCK &&
- mval[-1].br_startblock != HOLESTARTBLOCK &&
- mval->br_startblock ==
- mval[-1].br_startblock + mval[-1].br_blockcount &&
- ((flags & XFS_BMAPI_IGSTATE) ||
- mval[-1].br_state == mval->br_state)) {
- ASSERT(mval->br_startoff ==
- mval[-1].br_startoff + mval[-1].br_blockcount);
- mval[-1].br_blockcount += mval->br_blockcount;
- } else if (n > 0 &&
- mval->br_startblock == DELAYSTARTBLOCK &&
- mval[-1].br_startblock == DELAYSTARTBLOCK &&
- mval->br_startoff ==
- mval[-1].br_startoff + mval[-1].br_blockcount) {
- mval[-1].br_blockcount += mval->br_blockcount;
- mval[-1].br_state = mval->br_state;
- } else if (!((n == 0) &&
- ((mval->br_startoff + mval->br_blockcount) <=
- obno))) {
- mval++;
- n++;
- }
+ /* Deal with the allocated space we found. */
+ xfs_bmapi_trim_map(mval, &bma.got, &bno, len, obno,
+ end, n, flags);
+
+ /* Execute unwritten extent conversion if necessary */
+ error = xfs_bmapi_convert_unwritten(&bma, mval, len, flags);
+ if (error == EAGAIN)
+ continue;
+ if (error)
+ goto error0;
+
+ /* update the extent map to return */
+ xfs_bmapi_update_map(&mval, &bno, &len, obno, end, &n, flags);
+
/*
* If we're done, stop now. Stop when we've allocated
* XFS_BMAP_MAX_NMAP extents no matter what. Otherwise
* the transaction may get too big.
*/
- if (bno >= end || n >= *nmap || nallocs >= *nmap)
+ if (bno >= end || n >= *nmap || bma.nallocs >= *nmap)
break;
- /*
- * Else go on to the next record.
- */
- prev = got;
- if (++lastx < nextents) {
- ep = xfs_iext_get_ext(ifp, lastx);
- xfs_bmbt_get_all(ep, &got);
- } else {
+
+ /* Else go on to the next record. */
+ bma.prev = bma.got;
+ if (++bma.idx < ifp->if_bytes / sizeof(xfs_bmbt_rec_t)) {
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, bma.idx),
+ &bma.got);
+ } else
eof = 1;
- }
}
*nmap = n;
+
/*
* Transform from btree to extents, give it cur.
*/
- if (tp && XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_BTREE &&
+ if (XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_BTREE &&
XFS_IFORK_NEXTENTS(ip, whichfork) <= ifp->if_ext_max) {
- ASSERT(wr && cur);
- error = xfs_bmap_btree_to_extents(tp, ip, cur,
+ int tmp_logflags = 0;
+
+ ASSERT(bma.cur);
+ error = xfs_bmap_btree_to_extents(tp, ip, bma.cur,
&tmp_logflags, whichfork);
- logflags |= tmp_logflags;
+ bma.logflags |= tmp_logflags;
if (error)
goto error0;
}
@@ -4855,34 +4984,33 @@
* Log everything. Do this after conversion, there's no point in
* logging the extent records if we've converted to btree format.
*/
- if ((logflags & xfs_ilog_fext(whichfork)) &&
+ if ((bma.logflags & xfs_ilog_fext(whichfork)) &&
XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
- logflags &= ~xfs_ilog_fext(whichfork);
- else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
+ bma.logflags &= ~xfs_ilog_fext(whichfork);
+ else if ((bma.logflags & xfs_ilog_fbroot(whichfork)) &&
XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
- logflags &= ~xfs_ilog_fbroot(whichfork);
+ bma.logflags &= ~xfs_ilog_fbroot(whichfork);
/*
* Log whatever the flags say, even if error. Otherwise we might miss
* detecting a case where the data is changed, there's an error,
* and it's not logged so we don't shutdown when we should.
*/
- if (logflags) {
- ASSERT(tp && wr);
- xfs_trans_log_inode(tp, ip, logflags);
- }
- if (cur) {
+ if (bma.logflags)
+ xfs_trans_log_inode(tp, ip, bma.logflags);
+
+ if (bma.cur) {
if (!error) {
ASSERT(*firstblock == NULLFSBLOCK ||
XFS_FSB_TO_AGNO(mp, *firstblock) ==
XFS_FSB_TO_AGNO(mp,
- cur->bc_private.b.firstblock) ||
+ bma.cur->bc_private.b.firstblock) ||
(flist->xbf_low &&
XFS_FSB_TO_AGNO(mp, *firstblock) <
XFS_FSB_TO_AGNO(mp,
- cur->bc_private.b.firstblock)));
- *firstblock = cur->bc_private.b.firstblock;
+ bma.cur->bc_private.b.firstblock)));
+ *firstblock = bma.cur->bc_private.b.firstblock;
}
- xfs_btree_del_cursor(cur,
+ xfs_btree_del_cursor(bma.cur,
error ? XFS_BTREE_ERROR : XFS_BTREE_NOERROR);
}
if (!error)
@@ -4892,58 +5020,6 @@
}
/*
- * Map file blocks to filesystem blocks, simple version.
- * One block (extent) only, read-only.
- * For flags, only the XFS_BMAPI_ATTRFORK flag is examined.
- * For the other flag values, the effect is as if XFS_BMAPI_METADATA
- * was set and all the others were clear.
- */
-int /* error */
-xfs_bmapi_single(
- xfs_trans_t *tp, /* transaction pointer */
- xfs_inode_t *ip, /* incore inode */
- int whichfork, /* data or attr fork */
- xfs_fsblock_t *fsb, /* output: mapped block */
- xfs_fileoff_t bno) /* starting file offs. mapped */
-{
- int eof; /* we've hit the end of extents */
- int error; /* error return */
- xfs_bmbt_irec_t got; /* current file extent record */
- xfs_ifork_t *ifp; /* inode fork pointer */
- xfs_extnum_t lastx; /* last useful extent number */
- xfs_bmbt_irec_t prev; /* previous file extent record */
-
- ifp = XFS_IFORK_PTR(ip, whichfork);
- if (unlikely(
- XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE &&
- XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)) {
- XFS_ERROR_REPORT("xfs_bmapi_single", XFS_ERRLEVEL_LOW,
- ip->i_mount);
- return XFS_ERROR(EFSCORRUPTED);
- }
- if (XFS_FORCED_SHUTDOWN(ip->i_mount))
- return XFS_ERROR(EIO);
- XFS_STATS_INC(xs_blk_mapr);
- if (!(ifp->if_flags & XFS_IFEXTENTS) &&
- (error = xfs_iread_extents(tp, ip, whichfork)))
- return error;
- (void)xfs_bmap_search_extents(ip, bno, whichfork, &eof, &lastx, &got,
- &prev);
- /*
- * Reading past eof, act as though there's a hole
- * up to end.
- */
- if (eof || got.br_startoff > bno) {
- *fsb = NULLFSBLOCK;
- return 0;
- }
- ASSERT(!isnullstartblock(got.br_startblock));
- ASSERT(bno < got.br_startoff + got.br_blockcount);
- *fsb = got.br_startblock + (bno - got.br_startoff);
- return 0;
-}
-
-/*
* Unmap (remove) blocks from a file.
* If nexts is nonzero then the number of extents to remove is limited to
* that value. If not all extents in the block range can be removed then
@@ -5114,9 +5190,9 @@
del.br_blockcount = mod;
}
del.br_state = XFS_EXT_UNWRITTEN;
- error = xfs_bmap_add_extent(tp, ip, &lastx, &cur, &del,
- firstblock, flist, &logflags,
- XFS_DATA_FORK);
+ error = xfs_bmap_add_extent_unwritten_real(tp, ip,
+ &lastx, &cur, &del, firstblock, flist,
+ &logflags);
if (error)
goto error0;
goto nodelete;
@@ -5172,18 +5248,18 @@
}
prev.br_state = XFS_EXT_UNWRITTEN;
lastx--;
- error = xfs_bmap_add_extent(tp, ip, &lastx,
- &cur, &prev, firstblock, flist,
- &logflags, XFS_DATA_FORK);
+ error = xfs_bmap_add_extent_unwritten_real(tp,
+ ip, &lastx, &cur, &prev,
+ firstblock, flist, &logflags);
if (error)
goto error0;
goto nodelete;
} else {
ASSERT(del.br_state == XFS_EXT_NORM);
del.br_state = XFS_EXT_UNWRITTEN;
- error = xfs_bmap_add_extent(tp, ip, &lastx,
- &cur, &del, firstblock, flist,
- &logflags, XFS_DATA_FORK);
+ error = xfs_bmap_add_extent_unwritten_real(tp,
+ ip, &lastx, &cur, &del,
+ firstblock, flist, &logflags);
if (error)
goto error0;
goto nodelete;
@@ -5505,10 +5581,9 @@
do {
nmap = (nexleft > subnex) ? subnex : nexleft;
- error = xfs_bmapi(NULL, ip, XFS_BB_TO_FSBT(mp, bmv->bmv_offset),
- XFS_BB_TO_FSB(mp, bmv->bmv_length),
- bmapi_flags, NULL, 0, map, &nmap,
- NULL);
+ error = xfs_bmapi_read(ip, XFS_BB_TO_FSBT(mp, bmv->bmv_offset),
+ XFS_BB_TO_FSB(mp, bmv->bmv_length),
+ map, &nmap, bmapi_flags);
if (error)
goto out_free_map;
ASSERT(nmap <= subnex);
@@ -5582,89 +5657,6 @@
return error;
}
-/*
- * Check the last inode extent to determine whether this allocation will result
- * in blocks being allocated at the end of the file. When we allocate new data
- * blocks at the end of the file which do not start at the previous data block,
- * we will try to align the new blocks at stripe unit boundaries.
- */
-STATIC int /* error */
-xfs_bmap_isaeof(
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_fileoff_t off, /* file offset in fsblocks */
- int whichfork, /* data or attribute fork */
- char *aeof) /* return value */
-{
- int error; /* error return value */
- xfs_ifork_t *ifp; /* inode fork pointer */
- xfs_bmbt_rec_host_t *lastrec; /* extent record pointer */
- xfs_extnum_t nextents; /* number of file extents */
- xfs_bmbt_irec_t s; /* expanded extent record */
-
- ASSERT(whichfork == XFS_DATA_FORK);
- ifp = XFS_IFORK_PTR(ip, whichfork);
- if (!(ifp->if_flags & XFS_IFEXTENTS) &&
- (error = xfs_iread_extents(NULL, ip, whichfork)))
- return error;
- nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
- if (nextents == 0) {
- *aeof = 1;
- return 0;
- }
- /*
- * Go to the last extent
- */
- lastrec = xfs_iext_get_ext(ifp, nextents - 1);
- xfs_bmbt_get_all(lastrec, &s);
- /*
- * Check we are allocating in the last extent (for delayed allocations)
- * or past the last extent for non-delayed allocations.
- */
- *aeof = (off >= s.br_startoff &&
- off < s.br_startoff + s.br_blockcount &&
- isnullstartblock(s.br_startblock)) ||
- off >= s.br_startoff + s.br_blockcount;
- return 0;
-}
-
-/*
- * Check if the endoff is outside the last extent. If so the caller will grow
- * the allocation to a stripe unit boundary.
- */
-int /* error */
-xfs_bmap_eof(
- xfs_inode_t *ip, /* incore inode pointer */
- xfs_fileoff_t endoff, /* file offset in fsblocks */
- int whichfork, /* data or attribute fork */
- int *eof) /* result value */
-{
- xfs_fsblock_t blockcount; /* extent block count */
- int error; /* error return value */
- xfs_ifork_t *ifp; /* inode fork pointer */
- xfs_bmbt_rec_host_t *lastrec; /* extent record pointer */
- xfs_extnum_t nextents; /* number of file extents */
- xfs_fileoff_t startoff; /* extent starting file offset */
-
- ASSERT(whichfork == XFS_DATA_FORK);
- ifp = XFS_IFORK_PTR(ip, whichfork);
- if (!(ifp->if_flags & XFS_IFEXTENTS) &&
- (error = xfs_iread_extents(NULL, ip, whichfork)))
- return error;
- nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
- if (nextents == 0) {
- *eof = 1;
- return 0;
- }
- /*
- * Go to the last extent
- */
- lastrec = xfs_iext_get_ext(ifp, nextents - 1);
- startoff = xfs_bmbt_get_startoff(lastrec);
- blockcount = xfs_bmbt_get_blockcount(lastrec);
- *eof = endoff >= startoff + blockcount;
- return 0;
-}
-
#ifdef DEBUG
STATIC struct xfs_buf *
xfs_bmap_get_bp(
@@ -6099,9 +6091,8 @@
* trying to remove a real extent (which requires a
* transaction) or a hole, which is probably a bad idea...
*/
- error = xfs_bmapi(NULL, ip, start_fsb, 1,
- XFS_BMAPI_ENTIRE, NULL, 0, &imap,
- &nimaps, NULL);
+ error = xfs_bmapi_read(ip, start_fsb, 1, &imap, &nimaps,
+ XFS_BMAPI_ENTIRE);
if (error) {
/* something screwed, just bail */
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index c62234b..89ee672 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -62,27 +62,23 @@
#define XFS_BMAP_MAX_NMAP 4
/*
- * Flags for xfs_bmapi
+ * Flags for xfs_bmapi_*
*/
-#define XFS_BMAPI_WRITE 0x001 /* write operation: allocate space */
-#define XFS_BMAPI_DELAY 0x002 /* delayed write operation */
-#define XFS_BMAPI_ENTIRE 0x004 /* return entire extent, not trimmed */
-#define XFS_BMAPI_METADATA 0x008 /* mapping metadata not user data */
-#define XFS_BMAPI_ATTRFORK 0x010 /* use attribute fork not data */
-#define XFS_BMAPI_PREALLOC 0x040 /* preallocation op: unwritten space */
-#define XFS_BMAPI_IGSTATE 0x080 /* Ignore state - */
+#define XFS_BMAPI_ENTIRE 0x001 /* return entire extent, not trimmed */
+#define XFS_BMAPI_METADATA 0x002 /* mapping metadata not user data */
+#define XFS_BMAPI_ATTRFORK 0x004 /* use attribute fork not data */
+#define XFS_BMAPI_PREALLOC 0x008 /* preallocation op: unwritten space */
+#define XFS_BMAPI_IGSTATE 0x010 /* Ignore state - */
/* combine contig. space */
-#define XFS_BMAPI_CONTIG 0x100 /* must allocate only one extent */
+#define XFS_BMAPI_CONTIG 0x020 /* must allocate only one extent */
/*
* unwritten extent conversion - this needs write cache flushing and no additional
* allocation alignments. When specified with XFS_BMAPI_PREALLOC it converts
* from written to unwritten, otherwise convert from unwritten to written.
*/
-#define XFS_BMAPI_CONVERT 0x200
+#define XFS_BMAPI_CONVERT 0x040
#define XFS_BMAPI_FLAGS \
- { XFS_BMAPI_WRITE, "WRITE" }, \
- { XFS_BMAPI_DELAY, "DELAY" }, \
{ XFS_BMAPI_ENTIRE, "ENTIRE" }, \
{ XFS_BMAPI_METADATA, "METADATA" }, \
{ XFS_BMAPI_ATTRFORK, "ATTRFORK" }, \
@@ -113,21 +109,28 @@
* Argument structure for xfs_bmap_alloc.
*/
typedef struct xfs_bmalloca {
- xfs_fsblock_t firstblock; /* i/o first block allocated */
- xfs_fsblock_t rval; /* starting block of new extent */
- xfs_fileoff_t off; /* offset in file filling in */
+ xfs_fsblock_t *firstblock; /* i/o first block allocated */
+ struct xfs_bmap_free *flist; /* bmap freelist */
struct xfs_trans *tp; /* transaction pointer */
struct xfs_inode *ip; /* incore inode pointer */
- struct xfs_bmbt_irec *prevp; /* extent before the new one */
- struct xfs_bmbt_irec *gotp; /* extent after, or delayed */
- xfs_extlen_t alen; /* i/o length asked/allocated */
+ struct xfs_bmbt_irec prev; /* extent before the new one */
+ struct xfs_bmbt_irec got; /* extent after, or delayed */
+
+ xfs_fileoff_t offset; /* offset in file filling in */
+ xfs_extlen_t length; /* i/o length asked/allocated */
+ xfs_fsblock_t blkno; /* starting block of new extent */
+
+ struct xfs_btree_cur *cur; /* btree cursor */
+ xfs_extnum_t idx; /* current extent index */
+ int nallocs;/* number of extents alloc'd */
+ int logflags;/* flags for transaction logging */
+
xfs_extlen_t total; /* total blocks needed for xaction */
xfs_extlen_t minlen; /* minimum allocation size (blocks) */
xfs_extlen_t minleft; /* amount must be left after alloc */
char eof; /* set if allocating past last extent */
char wasdel; /* replacing a delayed allocation */
char userdata;/* set if is user data */
- char low; /* low on space, using seq'l ags */
char aeof; /* allocated space at eof */
char conv; /* overwriting unwritten extents */
} xfs_bmalloca_t;
@@ -152,251 +155,62 @@
{ BMAP_RIGHT_FILLING, "RF" }, \
{ BMAP_ATTRFORK, "ATTR" }
-/*
- * Add bmap trace insert entries for all the contents of the extent list.
- *
- * Quite excessive tracing. Only do this for debug builds.
- */
#if defined(__KERNEL) && defined(DEBUG)
-void
-xfs_bmap_trace_exlist(
- struct xfs_inode *ip, /* incore inode pointer */
- xfs_extnum_t cnt, /* count of entries in list */
- int whichfork,
- unsigned long caller_ip); /* data or attr fork */
+void xfs_bmap_trace_exlist(struct xfs_inode *ip, xfs_extnum_t cnt,
+ int whichfork, unsigned long caller_ip);
#define XFS_BMAP_TRACE_EXLIST(ip,c,w) \
xfs_bmap_trace_exlist(ip,c,w, _THIS_IP_)
#else
#define XFS_BMAP_TRACE_EXLIST(ip,c,w)
#endif
-/*
- * Convert inode from non-attributed to attributed.
- * Must not be in a transaction, ip must not be locked.
- */
-int /* error code */
-xfs_bmap_add_attrfork(
- struct xfs_inode *ip, /* incore inode pointer */
- int size, /* space needed for new attribute */
- int rsvd); /* flag for reserved block allocation */
-
-/*
- * Add the extent to the list of extents to be free at transaction end.
- * The list is maintained sorted (by block number).
- */
-void
-xfs_bmap_add_free(
- xfs_fsblock_t bno, /* fs block number of extent */
- xfs_filblks_t len, /* length of extent */
- xfs_bmap_free_t *flist, /* list of extents */
- struct xfs_mount *mp); /* mount point structure */
-
-/*
- * Routine to clean up the free list data structure when
- * an error occurs during a transaction.
- */
-void
-xfs_bmap_cancel(
- xfs_bmap_free_t *flist); /* free list to clean up */
-
-/*
- * Compute and fill in the value of the maximum depth of a bmap btree
- * in this filesystem. Done once, during mount.
- */
-void
-xfs_bmap_compute_maxlevels(
- struct xfs_mount *mp, /* file system mount structure */
- int whichfork); /* data or attr fork */
-
-/*
- * Returns the file-relative block number of the first unused block in the file.
- * This is the lowest-address hole if the file has holes, else the first block
- * past the end of file.
- */
-int /* error */
-xfs_bmap_first_unused(
- struct xfs_trans *tp, /* transaction pointer */
- struct xfs_inode *ip, /* incore inode */
- xfs_extlen_t len, /* size of hole to find */
- xfs_fileoff_t *unused, /* unused block num */
- int whichfork); /* data or attr fork */
-
-/*
- * Returns the file-relative block number of the last block + 1 before
- * last_block (input value) in the file.
- * This is not based on i_size, it is based on the extent list.
- * Returns 0 for local files, as they do not have an extent list.
- */
-int /* error */
-xfs_bmap_last_before(
- struct xfs_trans *tp, /* transaction pointer */
- struct xfs_inode *ip, /* incore inode */
- xfs_fileoff_t *last_block, /* last block */
- int whichfork); /* data or attr fork */
-
-/*
- * Returns the file-relative block number of the first block past eof in
- * the file. This is not based on i_size, it is based on the extent list.
- * Returns 0 for local files, as they do not have an extent list.
- */
-int /* error */
-xfs_bmap_last_offset(
- struct xfs_trans *tp, /* transaction pointer */
- struct xfs_inode *ip, /* incore inode */
- xfs_fileoff_t *unused, /* last block num */
- int whichfork); /* data or attr fork */
-
-/*
- * Returns whether the selected fork of the inode has exactly one
- * block or not. For the data fork we check this matches di_size,
- * implying the file's range is 0..bsize-1.
- */
-int
-xfs_bmap_one_block(
- struct xfs_inode *ip, /* incore inode */
- int whichfork); /* data or attr fork */
-
-/*
- * Read in the extents to iu_extents.
- * All inode fields are set up by caller, we just traverse the btree
- * and copy the records in.
- */
-int /* error */
-xfs_bmap_read_extents(
- struct xfs_trans *tp, /* transaction pointer */
- struct xfs_inode *ip, /* incore inode */
- int whichfork); /* data or attr fork */
-
-/*
- * Map file blocks to filesystem blocks.
- * File range is given by the bno/len pair.
- * Adds blocks to file if a write ("flags & XFS_BMAPI_WRITE" set)
- * into a hole or past eof.
- * Only allocates blocks from a single allocation group,
- * to avoid locking problems.
- * The returned value in "firstblock" from the first call in a transaction
- * must be remembered and presented to subsequent calls in "firstblock".
- * An upper bound for the number of blocks to be allocated is supplied to
- * the first call in "total"; if no allocation group has that many free
- * blocks then the call will fail (return NULLFSBLOCK in "firstblock").
- */
-int /* error */
-xfs_bmapi(
- struct xfs_trans *tp, /* transaction pointer */
- struct xfs_inode *ip, /* incore inode */
- xfs_fileoff_t bno, /* starting file offs. mapped */
- xfs_filblks_t len, /* length to map in file */
- int flags, /* XFS_BMAPI_... */
- xfs_fsblock_t *firstblock, /* first allocated block
- controls a.g. for allocs */
- xfs_extlen_t total, /* total blocks needed */
- struct xfs_bmbt_irec *mval, /* output: map values */
- int *nmap, /* i/o: mval size/count */
- xfs_bmap_free_t *flist); /* i/o: list extents to free */
-
-/*
- * Map file blocks to filesystem blocks, simple version.
- * One block only, read-only.
- * For flags, only the XFS_BMAPI_ATTRFORK flag is examined.
- * For the other flag values, the effect is as if XFS_BMAPI_METADATA
- * was set and all the others were clear.
- */
-int /* error */
-xfs_bmapi_single(
- struct xfs_trans *tp, /* transaction pointer */
- struct xfs_inode *ip, /* incore inode */
- int whichfork, /* data or attr fork */
- xfs_fsblock_t *fsb, /* output: mapped block */
- xfs_fileoff_t bno); /* starting file offs. mapped */
-
-/*
- * Unmap (remove) blocks from a file.
- * If nexts is nonzero then the number of extents to remove is limited to
- * that value. If not all extents in the block range can be removed then
- * *done is set.
- */
-int /* error */
-xfs_bunmapi(
- struct xfs_trans *tp, /* transaction pointer */
- struct xfs_inode *ip, /* incore inode */
- xfs_fileoff_t bno, /* starting offset to unmap */
- xfs_filblks_t len, /* length to unmap in file */
- int flags, /* XFS_BMAPI_... */
- xfs_extnum_t nexts, /* number of extents max */
- xfs_fsblock_t *firstblock, /* first allocated block
- controls a.g. for allocs */
- xfs_bmap_free_t *flist, /* i/o: list extents to free */
- int *done); /* set if not done yet */
-
-/*
- * Check an extent list, which has just been read, for
- * any bit in the extent flag field.
- */
-int
-xfs_check_nostate_extents(
- struct xfs_ifork *ifp,
- xfs_extnum_t idx,
- xfs_extnum_t num);
-
-uint
-xfs_default_attroffset(
- struct xfs_inode *ip);
+int xfs_bmap_add_attrfork(struct xfs_inode *ip, int size, int rsvd);
+void xfs_bmap_add_free(xfs_fsblock_t bno, xfs_filblks_t len,
+ struct xfs_bmap_free *flist, struct xfs_mount *mp);
+void xfs_bmap_cancel(struct xfs_bmap_free *flist);
+void xfs_bmap_compute_maxlevels(struct xfs_mount *mp, int whichfork);
+int xfs_bmap_first_unused(struct xfs_trans *tp, struct xfs_inode *ip,
+ xfs_extlen_t len, xfs_fileoff_t *unused, int whichfork);
+int xfs_bmap_last_before(struct xfs_trans *tp, struct xfs_inode *ip,
+ xfs_fileoff_t *last_block, int whichfork);
+int xfs_bmap_last_offset(struct xfs_trans *tp, struct xfs_inode *ip,
+ xfs_fileoff_t *unused, int whichfork);
+int xfs_bmap_one_block(struct xfs_inode *ip, int whichfork);
+int xfs_bmap_read_extents(struct xfs_trans *tp, struct xfs_inode *ip,
+ int whichfork);
+int xfs_bmapi_read(struct xfs_inode *ip, xfs_fileoff_t bno,
+ xfs_filblks_t len, struct xfs_bmbt_irec *mval,
+ int *nmap, int flags);
+int xfs_bmapi_delay(struct xfs_inode *ip, xfs_fileoff_t bno,
+ xfs_filblks_t len, struct xfs_bmbt_irec *mval,
+ int *nmap, int flags);
+int xfs_bmapi_write(struct xfs_trans *tp, struct xfs_inode *ip,
+ xfs_fileoff_t bno, xfs_filblks_t len, int flags,
+ xfs_fsblock_t *firstblock, xfs_extlen_t total,
+ struct xfs_bmbt_irec *mval, int *nmap,
+ struct xfs_bmap_free *flist);
+int xfs_bunmapi(struct xfs_trans *tp, struct xfs_inode *ip,
+ xfs_fileoff_t bno, xfs_filblks_t len, int flags,
+ xfs_extnum_t nexts, xfs_fsblock_t *firstblock,
+ struct xfs_bmap_free *flist, int *done);
+int xfs_check_nostate_extents(struct xfs_ifork *ifp, xfs_extnum_t idx,
+ xfs_extnum_t num);
+uint xfs_default_attroffset(struct xfs_inode *ip);
#ifdef __KERNEL__
-
-/*
- * Routine to be called at transaction's end by xfs_bmapi, xfs_bunmapi
- * caller. Frees all the extents that need freeing, which must be done
- * last due to locking considerations.
- *
- * Return 1 if the given transaction was committed and a new one allocated,
- * and 0 otherwise.
- */
-int /* error */
-xfs_bmap_finish(
- struct xfs_trans **tp, /* transaction pointer addr */
- xfs_bmap_free_t *flist, /* i/o: list extents to free */
- int *committed); /* xact committed or not */
-
/* bmap to userspace formatter - copy to user & advance pointer */
typedef int (*xfs_bmap_format_t)(void **, struct getbmapx *, int *);
-/*
- * Get inode's extents as described in bmv, and format for output.
- */
-int /* error code */
-xfs_getbmap(
- xfs_inode_t *ip,
- struct getbmapx *bmv, /* user bmap structure */
- xfs_bmap_format_t formatter, /* format to user */
- void *arg); /* formatter arg */
-
-/*
- * Check if the endoff is outside the last extent. If so the caller will grow
- * the allocation to a stripe unit boundary
- */
-int
-xfs_bmap_eof(
- struct xfs_inode *ip,
- xfs_fileoff_t endoff,
- int whichfork,
- int *eof);
-
-/*
- * Count fsblocks of the given fork.
- */
-int
-xfs_bmap_count_blocks(
- xfs_trans_t *tp,
- struct xfs_inode *ip,
- int whichfork,
- int *count);
-
-int
-xfs_bmap_punch_delalloc_range(
- struct xfs_inode *ip,
- xfs_fileoff_t start_fsb,
- xfs_fileoff_t length);
+int xfs_bmap_finish(struct xfs_trans **tp, struct xfs_bmap_free *flist,
+ int *committed);
+int xfs_getbmap(struct xfs_inode *ip, struct getbmapx *bmv,
+ xfs_bmap_format_t formatter, void *arg);
+int xfs_bmap_eof(struct xfs_inode *ip, xfs_fileoff_t endoff,
+ int whichfork, int *eof);
+int xfs_bmap_count_blocks(struct xfs_trans *tp, struct xfs_inode *ip,
+ int whichfork, int *count);
+int xfs_bmap_punch_delalloc_range(struct xfs_inode *ip,
+ xfs_fileoff_t start_fsb, xfs_fileoff_t length);
#endif /* __KERNEL__ */
#endif /* __XFS_BMAP_H__ */
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 2b9fd38..1f19f03 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -631,7 +631,7 @@
}
ASSERT(!xfs_buf_geterror(bp));
if (bp)
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_MAP, refval);
+ xfs_buf_set_ref(bp, refval);
*bpp = bp;
return 0;
}
@@ -939,13 +939,13 @@
switch (cur->bc_btnum) {
case XFS_BTNUM_BNO:
case XFS_BTNUM_CNT:
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_MAP, XFS_ALLOC_BTREE_REF);
+ xfs_buf_set_ref(bp, XFS_ALLOC_BTREE_REF);
break;
case XFS_BTNUM_INO:
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_INOMAP, XFS_INO_BTREE_REF);
+ xfs_buf_set_ref(bp, XFS_INO_BTREE_REF);
break;
case XFS_BTNUM_BMAP:
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_MAP, XFS_BMAP_BTREE_REF);
+ xfs_buf_set_ref(bp, XFS_BMAP_BTREE_REF);
break;
default:
ASSERT(0);
@@ -970,7 +970,8 @@
*bpp = xfs_trans_get_buf(cur->bc_tp, mp->m_ddev_targp, d,
mp->m_bsize, flags);
- ASSERT(!xfs_buf_geterror(*bpp));
+ if (!*bpp)
+ return ENOMEM;
*block = XFS_BUF_TO_BLOCK(*bpp);
return 0;
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index c57836d..cf0ac05 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -43,7 +43,6 @@
static kmem_zone_t *xfs_buf_zone;
STATIC int xfsbufd(void *);
-STATIC void xfs_buf_delwri_queue(xfs_buf_t *, int);
static struct workqueue_struct *xfslogd_workqueue;
struct workqueue_struct *xfsdatad_workqueue;
@@ -66,10 +65,6 @@
#define xb_to_km(flags) \
(((flags) & XBF_DONT_BLOCK) ? KM_NOFS : KM_SLEEP)
-#define xfs_buf_allocate(flags) \
- kmem_zone_alloc(xfs_buf_zone, xb_to_km(flags))
-#define xfs_buf_deallocate(bp) \
- kmem_zone_free(xfs_buf_zone, (bp));
static inline int
xfs_buf_is_vmapped(
@@ -152,6 +147,7 @@
struct xfs_buf *bp)
{
bp->b_flags |= XBF_STALE;
+ xfs_buf_delwri_dequeue(bp);
atomic_set(&(bp)->b_lru_ref, 0);
if (!list_empty(&bp->b_lru)) {
struct xfs_buftarg *btp = bp->b_target;
@@ -167,14 +163,19 @@
ASSERT(atomic_read(&bp->b_hold) >= 1);
}
-STATIC void
-_xfs_buf_initialize(
- xfs_buf_t *bp,
- xfs_buftarg_t *target,
+struct xfs_buf *
+xfs_buf_alloc(
+ struct xfs_buftarg *target,
xfs_off_t range_base,
size_t range_length,
xfs_buf_flags_t flags)
{
+ struct xfs_buf *bp;
+
+ bp = kmem_zone_alloc(xfs_buf_zone, xb_to_km(flags));
+ if (unlikely(!bp))
+ return NULL;
+
/*
* We don't want certain flags to appear in b_flags.
*/
@@ -203,8 +204,9 @@
init_waitqueue_head(&bp->b_waiters);
XFS_STATS_INC(xb_create);
-
trace_xfs_buf_init(bp, _RET_IP_);
+
+ return bp;
}
/*
@@ -277,7 +279,7 @@
} else if (bp->b_flags & _XBF_KMEM)
kmem_free(bp->b_addr);
_xfs_buf_free_pages(bp);
- xfs_buf_deallocate(bp);
+ kmem_zone_free(xfs_buf_zone, bp);
}
/*
@@ -416,10 +418,7 @@
/*
* Look up, and creates if absent, a lockable buffer for
* a given range of an inode. The buffer is returned
- * locked. If other overlapping buffers exist, they are
- * released before the new buffer is created and locked,
- * which may imply that this call will block until those buffers
- * are unlocked. No I/O is implied by this call.
+ * locked. No I/O is implied by this call.
*/
xfs_buf_t *
_xfs_buf_find(
@@ -481,8 +480,6 @@
/* No match found */
if (new_bp) {
- _xfs_buf_initialize(new_bp, btp, range_base,
- range_length, flags);
rb_link_node(&new_bp->b_rbnode, parent, rbp);
rb_insert_color(&new_bp->b_rbnode, &pag->pag_buf_tree);
/* the buffer keeps the perag reference until it is freed */
@@ -525,35 +522,51 @@
}
/*
- * Assembles a buffer covering the specified range.
- * Storage in memory for all portions of the buffer will be allocated,
- * although backing storage may not be.
+ * Assembles a buffer covering the specified range. The code is optimised for
+ * cache hits, as metadata intensive workloads will see 3 orders of magnitude
+ * more hits than misses.
*/
-xfs_buf_t *
+struct xfs_buf *
xfs_buf_get(
xfs_buftarg_t *target,/* target for buffer */
xfs_off_t ioff, /* starting offset of range */
size_t isize, /* length of range */
xfs_buf_flags_t flags)
{
- xfs_buf_t *bp, *new_bp;
+ struct xfs_buf *bp;
+ struct xfs_buf *new_bp;
int error = 0;
- new_bp = xfs_buf_allocate(flags);
+ bp = _xfs_buf_find(target, ioff, isize, flags, NULL);
+ if (likely(bp))
+ goto found;
+
+ new_bp = xfs_buf_alloc(target, ioff << BBSHIFT, isize << BBSHIFT,
+ flags);
if (unlikely(!new_bp))
return NULL;
bp = _xfs_buf_find(target, ioff, isize, flags, new_bp);
+ if (!bp) {
+ kmem_zone_free(xfs_buf_zone, new_bp);
+ return NULL;
+ }
+
if (bp == new_bp) {
error = xfs_buf_allocate_memory(bp, flags);
if (error)
goto no_buffer;
- } else {
- xfs_buf_deallocate(new_bp);
- if (unlikely(bp == NULL))
- return NULL;
- }
+ } else
+ kmem_zone_free(xfs_buf_zone, new_bp);
+ /*
+ * Now we have a workable buffer, fill in the block number so
+ * that we can do IO on it.
+ */
+ bp->b_bn = ioff;
+ bp->b_count_desired = bp->b_buffer_length;
+
+found:
if (!(bp->b_flags & XBF_MAPPED)) {
error = _xfs_buf_map_pages(bp, flags);
if (unlikely(error)) {
@@ -564,18 +577,10 @@
}
XFS_STATS_INC(xb_get);
-
- /*
- * Always fill in the block number now, the mapped cases can do
- * their own overlay of this later.
- */
- bp->b_bn = ioff;
- bp->b_count_desired = bp->b_buffer_length;
-
trace_xfs_buf_get(bp, flags, _RET_IP_);
return bp;
- no_buffer:
+no_buffer:
if (flags & (XBF_LOCK | XBF_TRYLOCK))
xfs_buf_unlock(bp);
xfs_buf_rele(bp);
@@ -689,19 +694,6 @@
return bp;
}
-xfs_buf_t *
-xfs_buf_get_empty(
- size_t len,
- xfs_buftarg_t *target)
-{
- xfs_buf_t *bp;
-
- bp = xfs_buf_allocate(0);
- if (bp)
- _xfs_buf_initialize(bp, target, 0, len, 0);
- return bp;
-}
-
/*
* Return a buffer allocated as an empty buffer and associated to external
* memory via xfs_buf_associate_memory() back to it's empty state.
@@ -787,10 +779,9 @@
int error, i;
xfs_buf_t *bp;
- bp = xfs_buf_allocate(0);
+ bp = xfs_buf_alloc(target, 0, len, 0);
if (unlikely(bp == NULL))
goto fail;
- _xfs_buf_initialize(bp, target, 0, len, 0);
error = _xfs_buf_get_pages(bp, page_count, 0);
if (error)
@@ -818,7 +809,7 @@
__free_page(bp->b_pages[i]);
_xfs_buf_free_pages(bp);
fail_free_buf:
- xfs_buf_deallocate(bp);
+ kmem_zone_free(xfs_buf_zone, bp);
fail:
return NULL;
}
@@ -937,12 +928,6 @@
xfs_buf_unlock(
struct xfs_buf *bp)
{
- if ((bp->b_flags & (XBF_DELWRI|_XBF_DELWRI_Q)) == XBF_DELWRI) {
- atomic_inc(&bp->b_hold);
- bp->b_flags |= XBF_ASYNC;
- xfs_buf_delwri_queue(bp, 0);
- }
-
XB_CLEAR_OWNER(bp);
up(&bp->b_sema);
@@ -1019,9 +1004,19 @@
trace_xfs_buf_ioerror(bp, error, _RET_IP_);
}
+void
+xfs_buf_ioerror_alert(
+ struct xfs_buf *bp,
+ const char *func)
+{
+ xfs_alert(bp->b_target->bt_mount,
+"metadata I/O error: block 0x%llx (\"%s\") error %d buf count %zd",
+ (__uint64_t)XFS_BUF_ADDR(bp), func,
+ bp->b_error, XFS_BUF_COUNT(bp));
+}
+
int
xfs_bwrite(
- struct xfs_mount *mp,
struct xfs_buf *bp)
{
int error;
@@ -1033,25 +1028,13 @@
xfs_bdstrat_cb(bp);
error = xfs_buf_iowait(bp);
- if (error)
- xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR);
- xfs_buf_relse(bp);
+ if (error) {
+ xfs_force_shutdown(bp->b_target->bt_mount,
+ SHUTDOWN_META_IO_ERROR);
+ }
return error;
}
-void
-xfs_bdwrite(
- void *mp,
- struct xfs_buf *bp)
-{
- trace_xfs_buf_bdwrite(bp, _RET_IP_);
-
- bp->b_flags &= ~XBF_READ;
- bp->b_flags |= (XBF_DELWRI | XBF_ASYNC);
-
- xfs_buf_delwri_queue(bp, 1);
-}
-
/*
* Called when we want to stop a buffer from getting written or read.
* We attach the EIO error, muck with its flags, and call xfs_buf_ioend
@@ -1074,9 +1057,8 @@
* We're calling xfs_buf_ioend, so delete XBF_DONE flag.
*/
XFS_BUF_UNREAD(bp);
- XFS_BUF_UNDELAYWRITE(bp);
XFS_BUF_UNDONE(bp);
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
xfs_buf_ioend(bp, 0);
@@ -1103,9 +1085,8 @@
* change that interface.
*/
XFS_BUF_UNREAD(bp);
- XFS_BUF_UNDELAYWRITE(bp);
XFS_BUF_DONE(bp);
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
bp->b_iodone = NULL;
if (!(fl & XBF_ASYNC)) {
/*
@@ -1115,7 +1096,7 @@
* ASYNC buffers.
*/
xfs_buf_ioerror(bp, EIO);
- XFS_BUF_FINISH_IOWAIT(bp);
+ complete(&bp->b_iowait);
} else {
xfs_buf_relse(bp);
}
@@ -1275,15 +1256,10 @@
{
trace_xfs_buf_iorequest(bp, _RET_IP_);
- if (bp->b_flags & XBF_DELWRI) {
- xfs_buf_delwri_queue(bp, 1);
- return 0;
- }
+ ASSERT(!(bp->b_flags & XBF_DELWRI));
- if (bp->b_flags & XBF_WRITE) {
+ if (bp->b_flags & XBF_WRITE)
xfs_buf_wait_unpin(bp);
- }
-
xfs_buf_hold(bp);
/* Set the count to 1 initially, this will stop an I/O
@@ -1481,9 +1457,13 @@
btp->bt_smask = sectorsize - 1;
if (set_blocksize(btp->bt_bdev, sectorsize)) {
+ char name[BDEVNAME_SIZE];
+
+ bdevname(btp->bt_bdev, name);
+
xfs_warn(btp->bt_mount,
"Cannot set_blocksize to %u on device %s\n",
- sectorsize, xfs_buf_target_name(btp));
+ sectorsize, name);
return EINVAL;
}
@@ -1514,12 +1494,12 @@
}
STATIC int
-xfs_alloc_delwrite_queue(
+xfs_alloc_delwri_queue(
xfs_buftarg_t *btp,
const char *fsname)
{
- INIT_LIST_HEAD(&btp->bt_delwrite_queue);
- spin_lock_init(&btp->bt_delwrite_lock);
+ INIT_LIST_HEAD(&btp->bt_delwri_queue);
+ spin_lock_init(&btp->bt_delwri_lock);
btp->bt_flags = 0;
btp->bt_task = kthread_run(xfsbufd, btp, "xfsbufd/%s", fsname);
if (IS_ERR(btp->bt_task))
@@ -1549,7 +1529,7 @@
spin_lock_init(&btp->bt_lru_lock);
if (xfs_setsize_buftarg_early(btp, bdev))
goto error;
- if (xfs_alloc_delwrite_queue(btp, fsname))
+ if (xfs_alloc_delwri_queue(btp, fsname))
goto error;
btp->bt_shrinker.shrink = xfs_buftarg_shrink;
btp->bt_shrinker.seeks = DEFAULT_SEEKS;
@@ -1565,56 +1545,48 @@
/*
* Delayed write buffer handling
*/
-STATIC void
+void
xfs_buf_delwri_queue(
- xfs_buf_t *bp,
- int unlock)
+ xfs_buf_t *bp)
{
- struct list_head *dwq = &bp->b_target->bt_delwrite_queue;
- spinlock_t *dwlk = &bp->b_target->bt_delwrite_lock;
+ struct xfs_buftarg *btp = bp->b_target;
trace_xfs_buf_delwri_queue(bp, _RET_IP_);
- ASSERT((bp->b_flags&(XBF_DELWRI|XBF_ASYNC)) == (XBF_DELWRI|XBF_ASYNC));
+ ASSERT(!(bp->b_flags & XBF_READ));
- spin_lock(dwlk);
- /* If already in the queue, dequeue and place at tail */
+ spin_lock(&btp->bt_delwri_lock);
if (!list_empty(&bp->b_list)) {
+ /* if already in the queue, move it to the tail */
ASSERT(bp->b_flags & _XBF_DELWRI_Q);
- if (unlock)
- atomic_dec(&bp->b_hold);
- list_del(&bp->b_list);
- }
-
- if (list_empty(dwq)) {
+ list_move_tail(&bp->b_list, &btp->bt_delwri_queue);
+ } else {
/* start xfsbufd as it is about to have something to do */
- wake_up_process(bp->b_target->bt_task);
+ if (list_empty(&btp->bt_delwri_queue))
+ wake_up_process(bp->b_target->bt_task);
+
+ atomic_inc(&bp->b_hold);
+ bp->b_flags |= XBF_DELWRI | _XBF_DELWRI_Q | XBF_ASYNC;
+ list_add_tail(&bp->b_list, &btp->bt_delwri_queue);
}
-
- bp->b_flags |= _XBF_DELWRI_Q;
- list_add_tail(&bp->b_list, dwq);
bp->b_queuetime = jiffies;
- spin_unlock(dwlk);
-
- if (unlock)
- xfs_buf_unlock(bp);
+ spin_unlock(&btp->bt_delwri_lock);
}
void
xfs_buf_delwri_dequeue(
xfs_buf_t *bp)
{
- spinlock_t *dwlk = &bp->b_target->bt_delwrite_lock;
int dequeued = 0;
- spin_lock(dwlk);
+ spin_lock(&bp->b_target->bt_delwri_lock);
if ((bp->b_flags & XBF_DELWRI) && !list_empty(&bp->b_list)) {
ASSERT(bp->b_flags & _XBF_DELWRI_Q);
list_del_init(&bp->b_list);
dequeued = 1;
}
bp->b_flags &= ~(XBF_DELWRI|_XBF_DELWRI_Q);
- spin_unlock(dwlk);
+ spin_unlock(&bp->b_target->bt_delwri_lock);
if (dequeued)
xfs_buf_rele(bp);
@@ -1646,16 +1618,9 @@
if (bp->b_queuetime < jiffies - age)
return;
bp->b_queuetime = jiffies - age;
- spin_lock(&btp->bt_delwrite_lock);
- list_move(&bp->b_list, &btp->bt_delwrite_queue);
- spin_unlock(&btp->bt_delwrite_lock);
-}
-
-STATIC void
-xfs_buf_runall_queues(
- struct workqueue_struct *queue)
-{
- flush_workqueue(queue);
+ spin_lock(&btp->bt_delwri_lock);
+ list_move(&bp->b_list, &btp->bt_delwri_queue);
+ spin_unlock(&btp->bt_delwri_lock);
}
/*
@@ -1669,15 +1634,13 @@
unsigned long age)
{
xfs_buf_t *bp, *n;
- struct list_head *dwq = &target->bt_delwrite_queue;
- spinlock_t *dwlk = &target->bt_delwrite_lock;
int skipped = 0;
int force;
force = test_and_clear_bit(XBT_FORCE_FLUSH, &target->bt_flags);
INIT_LIST_HEAD(list);
- spin_lock(dwlk);
- list_for_each_entry_safe(bp, n, dwq, b_list) {
+ spin_lock(&target->bt_delwri_lock);
+ list_for_each_entry_safe(bp, n, &target->bt_delwri_queue, b_list) {
ASSERT(bp->b_flags & XBF_DELWRI);
if (!xfs_buf_ispinned(bp) && xfs_buf_trylock(bp)) {
@@ -1694,10 +1657,9 @@
} else
skipped++;
}
- spin_unlock(dwlk);
+ spin_unlock(&target->bt_delwri_lock);
return skipped;
-
}
/*
@@ -1747,7 +1709,7 @@
}
/* sleep for a long time if there is nothing to do. */
- if (list_empty(&target->bt_delwrite_queue))
+ if (list_empty(&target->bt_delwri_queue))
tout = MAX_SCHEDULE_TIMEOUT;
schedule_timeout_interruptible(tout);
@@ -1783,9 +1745,7 @@
LIST_HEAD(wait_list);
struct blk_plug plug;
- xfs_buf_runall_queues(xfsconvertd_workqueue);
- xfs_buf_runall_queues(xfsdatad_workqueue);
- xfs_buf_runall_queues(xfslogd_workqueue);
+ flush_workqueue(xfslogd_workqueue);
set_bit(XBT_FORCE_FLUSH, &target->bt_flags);
pincount = xfs_buf_delwri_split(target, &tmp_list, 0);
@@ -1866,11 +1826,3 @@
destroy_workqueue(xfslogd_workqueue);
kmem_zone_destroy(xfs_buf_zone);
}
-
-#ifdef CONFIG_KDB_MODULES
-struct list_head *
-xfs_get_buftarg_list(void)
-{
- return &xfs_buftarg_list;
-}
-#endif
diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index 620972b..5bab046 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -105,8 +105,8 @@
/* per device delwri queue */
struct task_struct *bt_task;
- struct list_head bt_delwrite_queue;
- spinlock_t bt_delwrite_lock;
+ struct list_head bt_delwri_queue;
+ spinlock_t bt_delwri_lock;
unsigned long bt_flags;
/* LRU control structures */
@@ -175,7 +175,8 @@
extern xfs_buf_t *xfs_buf_read(xfs_buftarg_t *, xfs_off_t, size_t,
xfs_buf_flags_t);
-extern xfs_buf_t *xfs_buf_get_empty(size_t, xfs_buftarg_t *);
+struct xfs_buf *xfs_buf_alloc(struct xfs_buftarg *, xfs_off_t, size_t,
+ xfs_buf_flags_t);
extern void xfs_buf_set_empty(struct xfs_buf *bp, size_t len);
extern xfs_buf_t *xfs_buf_get_uncached(struct xfs_buftarg *, size_t, int);
extern int xfs_buf_associate_memory(xfs_buf_t *, void *, size_t);
@@ -197,14 +198,14 @@
((bp)->b_sema.count <= 0)
/* Buffer Read and Write Routines */
-extern int xfs_bwrite(struct xfs_mount *mp, struct xfs_buf *bp);
-extern void xfs_bdwrite(void *mp, xfs_buf_t *bp);
+extern int xfs_bwrite(struct xfs_buf *bp);
extern void xfsbdstrat(struct xfs_mount *, struct xfs_buf *);
extern int xfs_bdstrat_cb(struct xfs_buf *);
extern void xfs_buf_ioend(xfs_buf_t *, int);
extern void xfs_buf_ioerror(xfs_buf_t *, int);
+extern void xfs_buf_ioerror_alert(struct xfs_buf *, const char *func);
extern int xfs_buf_iorequest(xfs_buf_t *);
extern int xfs_buf_iowait(xfs_buf_t *);
extern void xfs_buf_iomove(xfs_buf_t *, size_t, size_t, void *,
@@ -221,38 +222,22 @@
extern xfs_caddr_t xfs_buf_offset(xfs_buf_t *, size_t);
/* Delayed Write Buffer Routines */
-extern void xfs_buf_delwri_dequeue(xfs_buf_t *);
-extern void xfs_buf_delwri_promote(xfs_buf_t *);
+extern void xfs_buf_delwri_queue(struct xfs_buf *);
+extern void xfs_buf_delwri_dequeue(struct xfs_buf *);
+extern void xfs_buf_delwri_promote(struct xfs_buf *);
/* Buffer Daemon Setup Routines */
extern int xfs_buf_init(void);
extern void xfs_buf_terminate(void);
-static inline const char *
-xfs_buf_target_name(struct xfs_buftarg *target)
-{
- static char __b[BDEVNAME_SIZE];
-
- return bdevname(target->bt_bdev, __b);
-}
-
-
#define XFS_BUF_ZEROFLAGS(bp) \
((bp)->b_flags &= ~(XBF_READ|XBF_WRITE|XBF_ASYNC|XBF_DELWRI| \
XBF_SYNCIO|XBF_FUA|XBF_FLUSH))
void xfs_buf_stale(struct xfs_buf *bp);
-#define XFS_BUF_STALE(bp) xfs_buf_stale(bp);
#define XFS_BUF_UNSTALE(bp) ((bp)->b_flags &= ~XBF_STALE)
#define XFS_BUF_ISSTALE(bp) ((bp)->b_flags & XBF_STALE)
-#define XFS_BUF_SUPER_STALE(bp) do { \
- XFS_BUF_STALE(bp); \
- xfs_buf_delwri_dequeue(bp); \
- XFS_BUF_DONE(bp); \
- } while (0)
-#define XFS_BUF_DELAYWRITE(bp) ((bp)->b_flags |= XBF_DELWRI)
-#define XFS_BUF_UNDELAYWRITE(bp) xfs_buf_delwri_dequeue(bp)
#define XFS_BUF_ISDELAYWRITE(bp) ((bp)->b_flags & XBF_DELWRI)
#define XFS_BUF_DONE(bp) ((bp)->b_flags |= XBF_DONE)
@@ -280,23 +265,16 @@
#define XFS_BUF_SIZE(bp) ((bp)->b_buffer_length)
#define XFS_BUF_SET_SIZE(bp, cnt) ((bp)->b_buffer_length = (cnt))
-static inline void
-xfs_buf_set_ref(
- struct xfs_buf *bp,
- int lru_ref)
+static inline void xfs_buf_set_ref(struct xfs_buf *bp, int lru_ref)
{
atomic_set(&bp->b_lru_ref, lru_ref);
}
-#define XFS_BUF_SET_VTYPE_REF(bp, type, ref) xfs_buf_set_ref(bp, ref)
-#define XFS_BUF_SET_VTYPE(bp, type) do { } while (0)
static inline int xfs_buf_ispinned(struct xfs_buf *bp)
{
return atomic_read(&bp->b_pin_count);
}
-#define XFS_BUF_FINISH_IOWAIT(bp) complete(&bp->b_iowait);
-
static inline void xfs_buf_relse(xfs_buf_t *bp)
{
xfs_buf_unlock(bp);
@@ -313,14 +291,7 @@
extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
-#ifdef CONFIG_KDB_MODULES
-extern struct list_head *xfs_get_buftarg_list(void);
-#endif
-
#define xfs_getsize_buftarg(buftarg) block_size((buftarg)->bt_bdev)
#define xfs_readonly_buftarg(buftarg) bdev_read_only((buftarg)->bt_bdev)
-#define xfs_binval(buftarg) xfs_flush_buftarg(buftarg, 1)
-#define XFS_bflush(buftarg) xfs_flush_buftarg(buftarg, 1)
-
#endif /* __XFS_BUF_H__ */
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index ef43fce..1a35138 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -967,7 +967,8 @@
* I/O errors, there's no point in giving this a retry.
*/
if (XFS_FORCED_SHUTDOWN(mp)) {
- XFS_BUF_SUPER_STALE(bp);
+ xfs_buf_stale(bp);
+ XFS_BUF_DONE(bp);
trace_xfs_buf_item_iodone(bp, _RET_IP_);
goto do_callbacks;
}
@@ -975,9 +976,7 @@
if (bp->b_target != lasttarg ||
time_after(jiffies, (lasttime + 5*HZ))) {
lasttime = jiffies;
- xfs_alert(mp, "Device %s: metadata write error block 0x%llx",
- xfs_buf_target_name(bp->b_target),
- (__uint64_t)XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp, __func__);
}
lasttarg = bp->b_target;
@@ -993,7 +992,7 @@
xfs_buf_ioerror(bp, 0); /* errno of 0 unsets the flag */
if (!XFS_BUF_ISSTALE(bp)) {
- XFS_BUF_DELAYWRITE(bp);
+ xfs_buf_delwri_queue(bp);
XFS_BUF_DONE(bp);
}
ASSERT(bp->b_iodone != NULL);
@@ -1006,9 +1005,8 @@
* If the write of the buffer was synchronous, we want to make
* sure to return the error to the caller of xfs_bwrite().
*/
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
XFS_BUF_DONE(bp);
- XFS_BUF_UNDELAYWRITE(bp);
trace_xfs_buf_error_relse(bp, _RET_IP_);
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index ee9d542..77c7425 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -1578,9 +1578,8 @@
*/
nmap = 1;
ASSERT(args->firstblock != NULL);
- error = xfs_bmapi(tp, dp, *bno, count,
- xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
- XFS_BMAPI_CONTIG,
+ error = xfs_bmapi_write(tp, dp, *bno, count,
+ xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA|XFS_BMAPI_CONTIG,
args->firstblock, args->total, &map, &nmap,
args->flist);
if (error)
@@ -1602,9 +1601,8 @@
for (b = *bno, mapi = 0; b < *bno + count; ) {
nmap = MIN(XFS_BMAP_MAX_NMAP, count);
c = (int)(*bno + count - b);
- error = xfs_bmapi(tp, dp, b, c,
- xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|
- XFS_BMAPI_METADATA,
+ error = xfs_bmapi_write(tp, dp, b, c,
+ xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA,
args->firstblock, args->total,
&mapp[mapi], &nmap, args->flist);
if (error)
@@ -1975,33 +1973,16 @@
/*
* Optimize the one-block case.
*/
- if (nfsb == 1) {
- xfs_fsblock_t fsb;
-
- if ((error =
- xfs_bmapi_single(trans, dp, whichfork, &fsb,
- (xfs_fileoff_t)bno))) {
- return error;
- }
+ if (nfsb == 1)
mapp = ↦
- if (fsb == NULLFSBLOCK) {
- nmap = 0;
- } else {
- map.br_startblock = fsb;
- map.br_startoff = (xfs_fileoff_t)bno;
- map.br_blockcount = 1;
- nmap = 1;
- }
- } else {
+ else
mapp = kmem_alloc(sizeof(*mapp) * nfsb, KM_SLEEP);
- nmap = nfsb;
- if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno,
- nfsb,
- XFS_BMAPI_METADATA |
- xfs_bmapi_aflag(whichfork),
- NULL, 0, mapp, &nmap, NULL)))
- goto exit0;
- }
+
+ nmap = nfsb;
+ error = xfs_bmapi_read(dp, (xfs_fileoff_t)bno, nfsb, mapp,
+ &nmap, xfs_bmapi_aflag(whichfork));
+ if (error)
+ goto exit0;
} else {
map.br_startblock = XFS_DADDR_TO_FSB(mp, mappedbno);
map.br_startoff = (xfs_fileoff_t)bno;
@@ -2072,13 +2053,10 @@
if (!bp)
continue;
if (caller == 1) {
- if (whichfork == XFS_ATTR_FORK) {
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_ATTR_BTREE,
- XFS_ATTR_BTREE_REF);
- } else {
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_DIR_BTREE,
- XFS_DIR_BTREE_REF);
- }
+ if (whichfork == XFS_ATTR_FORK)
+ xfs_buf_set_ref(bp, XFS_ATTR_BTREE_REF);
+ else
+ xfs_buf_set_ref(bp, XFS_DIR_BTREE_REF);
}
if (bplist) {
bplist[nbplist++] = bp;
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 9a84a85..654dc6f 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -425,8 +425,8 @@
}
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_trans_ijoin_ref(tp, tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_trans_ijoin(tp, tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
xfs_trans_log_inode(tp, ip, ilf_fields);
xfs_trans_log_inode(tp, tip, tilf_fields);
@@ -438,7 +438,7 @@
if (mp->m_flags & XFS_MOUNT_WSYNC)
xfs_trans_set_sync(tp);
- error = xfs_trans_commit(tp, XFS_TRANS_SWAPEXT);
+ error = xfs_trans_commit(tp, 0);
trace_xfs_swap_extent_after(ip, 0);
trace_xfs_swap_extent_after(tip, 1);
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index ca2386d..66e108f 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -888,12 +888,10 @@
* we already have in the table.
*/
nmap = map_size - map_valid;
- error = xfs_bmapi(NULL, dp,
- map_off,
+ error = xfs_bmapi_read(dp, map_off,
xfs_dir2_byte_to_da(mp,
XFS_DIR2_LEAF_OFFSET) - map_off,
- XFS_BMAPI_METADATA, NULL, 0,
- &map[map_valid], &nmap, NULL);
+ &map[map_valid], &nmap, 0);
/*
* Don't know if we should ignore this or
* try to return an error.
diff --git a/fs/xfs/xfs_discard.c b/fs/xfs/xfs_discard.c
index 244e797..8a24f0c 100644
--- a/fs/xfs/xfs_discard.c
+++ b/fs/xfs/xfs_discard.c
@@ -38,7 +38,7 @@
struct xfs_mount *mp,
xfs_agnumber_t agno,
xfs_fsblock_t start,
- xfs_fsblock_t len,
+ xfs_fsblock_t end,
xfs_fsblock_t minlen,
__uint64_t *blocks_trimmed)
{
@@ -100,7 +100,7 @@
* down partially overlapping ranges for now.
*/
if (XFS_AGB_TO_FSB(mp, agno, fbno) + flen < start ||
- XFS_AGB_TO_FSB(mp, agno, fbno) >= start + len) {
+ XFS_AGB_TO_FSB(mp, agno, fbno) > end) {
trace_xfs_discard_exclude(mp, agno, fbno, flen);
goto next_extent;
}
@@ -145,7 +145,7 @@
struct request_queue *q = mp->m_ddev_targp->bt_bdev->bd_disk->queue;
unsigned int granularity = q->limits.discard_granularity;
struct fstrim_range range;
- xfs_fsblock_t start, len, minlen;
+ xfs_fsblock_t start, end, minlen;
xfs_agnumber_t start_agno, end_agno, agno;
__uint64_t blocks_trimmed = 0;
int error, last_error = 0;
@@ -165,19 +165,19 @@
* matter as trimming blocks is an advisory interface.
*/
start = XFS_B_TO_FSBT(mp, range.start);
- len = XFS_B_TO_FSBT(mp, range.len);
+ end = start + XFS_B_TO_FSBT(mp, range.len) - 1;
minlen = XFS_B_TO_FSB(mp, max_t(u64, granularity, range.minlen));
- start_agno = XFS_FSB_TO_AGNO(mp, start);
- if (start_agno >= mp->m_sb.sb_agcount)
+ if (start >= mp->m_sb.sb_dblocks)
return -XFS_ERROR(EINVAL);
+ if (end > mp->m_sb.sb_dblocks - 1)
+ end = mp->m_sb.sb_dblocks - 1;
- end_agno = XFS_FSB_TO_AGNO(mp, start + len);
- if (end_agno >= mp->m_sb.sb_agcount)
- end_agno = mp->m_sb.sb_agcount - 1;
+ start_agno = XFS_FSB_TO_AGNO(mp, start);
+ end_agno = XFS_FSB_TO_AGNO(mp, end);
for (agno = start_agno; agno <= end_agno; agno++) {
- error = -xfs_trim_extents(mp, agno, start, len, minlen,
+ error = -xfs_trim_extents(mp, agno, start, end, minlen,
&blocks_trimmed);
if (error)
last_error = error;
diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index db62959..25d7280 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -377,16 +377,14 @@
return (ESRCH);
}
- xfs_trans_ijoin_ref(tp, quotip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, quotip, XFS_ILOCK_EXCL);
nmaps = 1;
- if ((error = xfs_bmapi(tp, quotip,
- offset_fsb, XFS_DQUOT_CLUSTER_SIZE_FSB,
- XFS_BMAPI_METADATA | XFS_BMAPI_WRITE,
- &firstblock,
- XFS_QM_DQALLOC_SPACE_RES(mp),
- &map, &nmaps, &flist))) {
+ error = xfs_bmapi_write(tp, quotip, offset_fsb,
+ XFS_DQUOT_CLUSTER_SIZE_FSB, XFS_BMAPI_METADATA,
+ &firstblock, XFS_QM_DQALLOC_SPACE_RES(mp),
+ &map, &nmaps, &flist);
+ if (error)
goto error0;
- }
ASSERT(map.br_blockcount == XFS_DQUOT_CLUSTER_SIZE_FSB);
ASSERT(nmaps == 1);
ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
@@ -402,8 +400,11 @@
dqp->q_blkno,
mp->m_quotainfo->qi_dqchunklen,
0);
- if (!bp || (error = xfs_buf_geterror(bp)))
+
+ error = xfs_buf_geterror(bp);
+ if (error)
goto error1;
+
/*
* Make a chunk of dquots out of this buffer and log
* the entire thing.
@@ -485,9 +486,8 @@
/*
* Find the block map; no allocations yet
*/
- error = xfs_bmapi(NULL, quotip, dqp->q_fileoffset,
- XFS_DQUOT_CLUSTER_SIZE_FSB, XFS_BMAPI_METADATA,
- NULL, 0, &map, &nmaps, NULL);
+ error = xfs_bmapi_read(quotip, dqp->q_fileoffset,
+ XFS_DQUOT_CLUSTER_SIZE_FSB, &map, &nmaps, 0);
xfs_iunlock(quotip, XFS_ILOCK_SHARED);
if (error)
@@ -605,7 +605,7 @@
dqp->q_res_rtbcount = be64_to_cpu(ddqp->d_rtbcount);
/* Mark the buf so that this will stay incore a little longer */
- XFS_BUF_SET_VTYPE_REF(bp, B_FS_DQUOT, XFS_DQUOT_REF);
+ xfs_buf_set_ref(bp, XFS_DQUOT_REF);
/*
* We got the buffer with a xfs_trans_read_buf() (in dqtobp())
@@ -1242,9 +1242,11 @@
}
if (flags & SYNC_WAIT)
- error = xfs_bwrite(mp, bp);
+ error = xfs_bwrite(bp);
else
- xfs_bdwrite(mp, bp);
+ xfs_buf_delwri_queue(bp);
+
+ xfs_buf_relse(bp);
trace_xfs_dqflush_done(dqp);
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 75e5d32..da10897 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -229,16 +229,16 @@
{
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
- int error = 0;
+ xfs_lsn_t lsn = 0;
xfs_ilock(ip, XFS_ILOCK_SHARED);
- if (xfs_ipincount(ip)) {
- error = _xfs_log_force_lsn(mp, ip->i_itemp->ili_last_lsn,
- XFS_LOG_SYNC, NULL);
- }
+ if (xfs_ipincount(ip))
+ lsn = ip->i_itemp->ili_last_lsn;
xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return error;
+ if (!lsn)
+ return 0;
+ return _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, NULL);
}
const struct export_operations xfs_export_operations = {
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 7f7b424..753ed9b 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -124,6 +124,35 @@
return (-status);
}
+/*
+ * Fsync operations on directories are much simpler than on regular files,
+ * as there is no file data to flush, and thus also no need for explicit
+ * cache flush operations, and there are no non-transaction metadata updates
+ * on directories either.
+ */
+STATIC int
+xfs_dir_fsync(
+ struct file *file,
+ loff_t start,
+ loff_t end,
+ int datasync)
+{
+ struct xfs_inode *ip = XFS_I(file->f_mapping->host);
+ struct xfs_mount *mp = ip->i_mount;
+ xfs_lsn_t lsn = 0;
+
+ trace_xfs_dir_fsync(ip);
+
+ xfs_ilock(ip, XFS_ILOCK_SHARED);
+ if (xfs_ipincount(ip))
+ lsn = ip->i_itemp->ili_last_lsn;
+ xfs_iunlock(ip, XFS_ILOCK_SHARED);
+
+ if (!lsn)
+ return 0;
+ return _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, NULL);
+}
+
STATIC int
xfs_file_fsync(
struct file *file,
@@ -137,6 +166,7 @@
struct xfs_trans *tp;
int error = 0;
int log_flushed = 0;
+ xfs_lsn_t lsn = 0;
trace_xfs_file_fsync(ip);
@@ -149,10 +179,6 @@
xfs_iflags_clear(ip, XFS_ITRUNCATED);
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- xfs_ioend_wait(ip);
- xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-
if (mp->m_flags & XFS_MOUNT_BARRIER) {
/*
* If we have an RT and/or log subvolume we need to make sure
@@ -216,11 +242,11 @@
* transaction. So we play it safe and fire off the
* transaction anyway.
*/
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- xfs_trans_set_sync(tp);
- error = _xfs_trans_commit(tp, 0, &log_flushed);
+ error = xfs_trans_commit(tp, 0);
+ lsn = ip->i_itemp->ili_last_lsn;
xfs_iunlock(ip, XFS_ILOCK_EXCL);
} else {
/*
@@ -231,14 +257,14 @@
* disk yet, the inode will be still be pinned. If it is,
* force the log.
*/
- if (xfs_ipincount(ip)) {
- error = _xfs_log_force_lsn(mp,
- ip->i_itemp->ili_last_lsn,
- XFS_LOG_SYNC, &log_flushed);
- }
+ if (xfs_ipincount(ip))
+ lsn = ip->i_itemp->ili_last_lsn;
xfs_iunlock(ip, XFS_ILOCK_SHARED);
}
+ if (!error && lsn)
+ error = _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, &log_flushed);
+
/*
* If we only have a single device, and the log force about was
* a no-op we might have to flush the data device cache here.
@@ -317,7 +343,19 @@
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
- if (unlikely(ioflags & IO_ISDIRECT)) {
+ /*
+ * Locking is a bit tricky here. If we take an exclusive lock
+ * for direct IO, we effectively serialise all new concurrent
+ * read IO to this file and block it behind IO that is currently in
+ * progress because IO in progress holds the IO lock shared. We only
+ * need to hold the lock exclusive to blow away the page cache, so
+ * only take lock exclusively if the page cache needs invalidation.
+ * This allows the normal direct IO case of no page cache pages to
+ * proceeed concurrently without serialisation.
+ */
+ xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
+ if ((ioflags & IO_ISDIRECT) && inode->i_mapping->nrpages) {
+ xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED);
xfs_rw_ilock(ip, XFS_IOLOCK_EXCL);
if (inode->i_mapping->nrpages) {
@@ -330,8 +368,7 @@
}
}
xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
- } else
- xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
+ }
trace_xfs_file_read(ip, size, iocb->ki_pos, ioflags);
@@ -407,11 +444,13 @@
*/
STATIC void
xfs_aio_write_newsize_update(
- struct xfs_inode *ip)
+ struct xfs_inode *ip,
+ xfs_fsize_t new_size)
{
- if (ip->i_new_size) {
+ if (new_size == ip->i_new_size) {
xfs_rw_ilock(ip, XFS_ILOCK_EXCL);
- ip->i_new_size = 0;
+ if (new_size == ip->i_new_size)
+ ip->i_new_size = 0;
if (ip->i_d.di_size > ip->i_size)
ip->i_d.di_size = ip->i_size;
xfs_rw_iunlock(ip, XFS_ILOCK_EXCL);
@@ -462,7 +501,7 @@
ret = generic_file_splice_write(pipe, outfilp, ppos, count, flags);
xfs_aio_write_isize_update(inode, ppos, ret);
- xfs_aio_write_newsize_update(ip);
+ xfs_aio_write_newsize_update(ip, new_size);
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
return ret;
}
@@ -500,11 +539,9 @@
last_fsb = XFS_B_TO_FSBT(mp, isize);
nimaps = 1;
- error = xfs_bmapi(NULL, ip, last_fsb, 1, 0, NULL, 0, &imap,
- &nimaps, NULL);
- if (error) {
+ error = xfs_bmapi_read(ip, last_fsb, 1, &imap, &nimaps, 0);
+ if (error)
return error;
- }
ASSERT(nimaps > 0);
/*
* If the block underlying isize is just a hole, then there
@@ -595,8 +632,8 @@
while (start_zero_fsb <= end_zero_fsb) {
nimaps = 1;
zero_count_fsb = end_zero_fsb - start_zero_fsb + 1;
- error = xfs_bmapi(NULL, ip, start_zero_fsb, zero_count_fsb,
- 0, NULL, 0, &imap, &nimaps, NULL);
+ error = xfs_bmapi_read(ip, start_zero_fsb, zero_count_fsb,
+ &imap, &nimaps, 0);
if (error) {
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
return error;
@@ -659,6 +696,7 @@
struct file *file,
loff_t *pos,
size_t *count,
+ xfs_fsize_t *new_sizep,
int *iolock)
{
struct inode *inode = file->f_mapping->host;
@@ -666,6 +704,9 @@
xfs_fsize_t new_size;
int error = 0;
+ xfs_rw_ilock(ip, XFS_ILOCK_EXCL);
+ *new_sizep = 0;
+restart:
error = generic_write_checks(file, pos, count, S_ISBLK(inode->i_mode));
if (error) {
xfs_rw_iunlock(ip, XFS_ILOCK_EXCL | *iolock);
@@ -673,20 +714,41 @@
return error;
}
- new_size = *pos + *count;
- if (new_size > ip->i_size)
- ip->i_new_size = new_size;
-
if (likely(!(file->f_mode & FMODE_NOCMTIME)))
file_update_time(file);
/*
* If the offset is beyond the size of the file, we need to zero any
* blocks that fall between the existing EOF and the start of this
- * write.
+ * write. There is no need to issue zeroing if another in-flght IO ends
+ * at or before this one If zeronig is needed and we are currently
+ * holding the iolock shared, we need to update it to exclusive which
+ * involves dropping all locks and relocking to maintain correct locking
+ * order. If we do this, restart the function to ensure all checks and
+ * values are still valid.
*/
- if (*pos > ip->i_size)
+ if ((ip->i_new_size && *pos > ip->i_new_size) ||
+ (!ip->i_new_size && *pos > ip->i_size)) {
+ if (*iolock == XFS_IOLOCK_SHARED) {
+ xfs_rw_iunlock(ip, XFS_ILOCK_EXCL | *iolock);
+ *iolock = XFS_IOLOCK_EXCL;
+ xfs_rw_ilock(ip, XFS_ILOCK_EXCL | *iolock);
+ goto restart;
+ }
error = -xfs_zero_eof(ip, *pos, ip->i_size);
+ }
+
+ /*
+ * If this IO extends beyond EOF, we may need to update ip->i_new_size.
+ * We have already zeroed space beyond EOF (if necessary). Only update
+ * ip->i_new_size if this IO ends beyond any other in-flight writes.
+ */
+ new_size = *pos + *count;
+ if (new_size > ip->i_size) {
+ if (new_size > ip->i_new_size)
+ ip->i_new_size = new_size;
+ *new_sizep = new_size;
+ }
xfs_rw_iunlock(ip, XFS_ILOCK_EXCL);
if (error)
@@ -721,7 +783,7 @@
* the dio layer. To avoid the problem with aio, we also need to wait for
* outstanding IOs to complete so that unwritten extent conversion is completed
* before we try to map the overlapping block. This is currently implemented by
- * hitting it with a big hammer (i.e. xfs_ioend_wait()).
+ * hitting it with a big hammer (i.e. inode_dio_wait()).
*
* Returns with locks held indicated by @iolock and errors indicated by
* negative return values.
@@ -733,6 +795,7 @@
unsigned long nr_segs,
loff_t pos,
size_t ocount,
+ xfs_fsize_t *new_size,
int *iolock)
{
struct file *file = iocb->ki_filp;
@@ -753,18 +816,35 @@
if ((pos & mp->m_blockmask) || ((pos + count) & mp->m_blockmask))
unaligned_io = 1;
- if (unaligned_io || mapping->nrpages || pos > ip->i_size)
+ /*
+ * We don't need to take an exclusive lock unless there page cache needs
+ * to be invalidated or unaligned IO is being executed. We don't need to
+ * consider the EOF extension case here because
+ * xfs_file_aio_write_checks() will relock the inode as necessary for
+ * EOF zeroing cases and fill out the new inode size as appropriate.
+ */
+ if (unaligned_io || mapping->nrpages)
*iolock = XFS_IOLOCK_EXCL;
else
*iolock = XFS_IOLOCK_SHARED;
- xfs_rw_ilock(ip, XFS_ILOCK_EXCL | *iolock);
+ xfs_rw_ilock(ip, *iolock);
- ret = xfs_file_aio_write_checks(file, &pos, &count, iolock);
+ /*
+ * Recheck if there are cached pages that need invalidate after we got
+ * the iolock to protect against other threads adding new pages while
+ * we were waiting for the iolock.
+ */
+ if (mapping->nrpages && *iolock == XFS_IOLOCK_SHARED) {
+ xfs_rw_iunlock(ip, *iolock);
+ *iolock = XFS_IOLOCK_EXCL;
+ xfs_rw_ilock(ip, *iolock);
+ }
+
+ ret = xfs_file_aio_write_checks(file, &pos, &count, new_size, iolock);
if (ret)
return ret;
if (mapping->nrpages) {
- WARN_ON(*iolock != XFS_IOLOCK_EXCL);
ret = -xfs_flushinval_pages(ip, (pos & PAGE_CACHE_MASK), -1,
FI_REMAPF_LOCKED);
if (ret)
@@ -776,7 +856,7 @@
* otherwise demote the lock if we had to flush cached pages
*/
if (unaligned_io)
- xfs_ioend_wait(ip);
+ inode_dio_wait(inode);
else if (*iolock == XFS_IOLOCK_EXCL) {
xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
*iolock = XFS_IOLOCK_SHARED;
@@ -798,6 +878,7 @@
unsigned long nr_segs,
loff_t pos,
size_t ocount,
+ xfs_fsize_t *new_size,
int *iolock)
{
struct file *file = iocb->ki_filp;
@@ -809,9 +890,9 @@
size_t count = ocount;
*iolock = XFS_IOLOCK_EXCL;
- xfs_rw_ilock(ip, XFS_ILOCK_EXCL | *iolock);
+ xfs_rw_ilock(ip, *iolock);
- ret = xfs_file_aio_write_checks(file, &pos, &count, iolock);
+ ret = xfs_file_aio_write_checks(file, &pos, &count, new_size, iolock);
if (ret)
return ret;
@@ -851,6 +932,7 @@
ssize_t ret;
int iolock;
size_t ocount = 0;
+ xfs_fsize_t new_size = 0;
XFS_STATS_INC(xs_write_calls);
@@ -870,10 +952,10 @@
if (unlikely(file->f_flags & O_DIRECT))
ret = xfs_file_dio_aio_write(iocb, iovp, nr_segs, pos,
- ocount, &iolock);
+ ocount, &new_size, &iolock);
else
ret = xfs_file_buffered_aio_write(iocb, iovp, nr_segs, pos,
- ocount, &iolock);
+ ocount, &new_size, &iolock);
xfs_aio_write_isize_update(inode, &iocb->ki_pos, ret);
@@ -894,7 +976,7 @@
}
out_unlock:
- xfs_aio_write_newsize_update(ip);
+ xfs_aio_write_newsize_update(ip, new_size);
xfs_rw_iunlock(ip, iolock);
return ret;
}
@@ -1087,7 +1169,7 @@
#ifdef CONFIG_COMPAT
.compat_ioctl = xfs_file_compat_ioctl,
#endif
- .fsync = xfs_file_fsync,
+ .fsync = xfs_dir_fsync,
};
static const struct vm_operations_struct xfs_file_vm_ops = {
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 3ff3d9e2..5170306 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -682,7 +682,7 @@
ip = ap->ip;
mp = ip->i_mount;
cache = mp->m_filestream;
- minlen = ap->alen;
+ minlen = ap->length;
*agp = NULLAGNUMBER;
/*
@@ -761,7 +761,7 @@
*/
ag = (ag == NULLAGNUMBER) ? 0 : (ag + 1) % mp->m_sb.sb_agcount;
flags = (ap->userdata ? XFS_PICK_USERDATA : 0) |
- (ap->low ? XFS_PICK_LOWSPACE : 0);
+ (ap->flist->xbf_low ? XFS_PICK_LOWSPACE : 0);
err = _xfs_filestream_pick_ag(mp, ag, agp, flags, minlen);
if (err || *agp == NULLAGNUMBER)
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 9153d2c..1c6fdeb 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -194,6 +194,10 @@
bp = xfs_buf_get(mp->m_ddev_targp,
XFS_AG_DADDR(mp, agno, XFS_AGF_DADDR(mp)),
XFS_FSS_TO_BB(mp, 1), XBF_LOCK | XBF_MAPPED);
+ if (!bp) {
+ error = ENOMEM;
+ goto error0;
+ }
agf = XFS_BUF_TO_AGF(bp);
memset(agf, 0, mp->m_sb.sb_sectsize);
agf->agf_magicnum = cpu_to_be32(XFS_AGF_MAGIC);
@@ -216,16 +220,21 @@
tmpsize = agsize - XFS_PREALLOC_BLOCKS(mp);
agf->agf_freeblks = cpu_to_be32(tmpsize);
agf->agf_longest = cpu_to_be32(tmpsize);
- error = xfs_bwrite(mp, bp);
- if (error) {
+ error = xfs_bwrite(bp);
+ xfs_buf_relse(bp);
+ if (error)
goto error0;
- }
+
/*
* AG inode header block
*/
bp = xfs_buf_get(mp->m_ddev_targp,
XFS_AG_DADDR(mp, agno, XFS_AGI_DADDR(mp)),
XFS_FSS_TO_BB(mp, 1), XBF_LOCK | XBF_MAPPED);
+ if (!bp) {
+ error = ENOMEM;
+ goto error0;
+ }
agi = XFS_BUF_TO_AGI(bp);
memset(agi, 0, mp->m_sb.sb_sectsize);
agi->agi_magicnum = cpu_to_be32(XFS_AGI_MAGIC);
@@ -240,10 +249,11 @@
agi->agi_dirino = cpu_to_be32(NULLAGINO);
for (bucket = 0; bucket < XFS_AGI_UNLINKED_BUCKETS; bucket++)
agi->agi_unlinked[bucket] = cpu_to_be32(NULLAGINO);
- error = xfs_bwrite(mp, bp);
- if (error) {
+ error = xfs_bwrite(bp);
+ xfs_buf_relse(bp);
+ if (error)
goto error0;
- }
+
/*
* BNO btree root block
*/
@@ -251,6 +261,10 @@
XFS_AGB_TO_DADDR(mp, agno, XFS_BNO_BLOCK(mp)),
BTOBB(mp->m_sb.sb_blocksize),
XBF_LOCK | XBF_MAPPED);
+ if (!bp) {
+ error = ENOMEM;
+ goto error0;
+ }
block = XFS_BUF_TO_BLOCK(bp);
memset(block, 0, mp->m_sb.sb_blocksize);
block->bb_magic = cpu_to_be32(XFS_ABTB_MAGIC);
@@ -262,10 +276,11 @@
arec->ar_startblock = cpu_to_be32(XFS_PREALLOC_BLOCKS(mp));
arec->ar_blockcount = cpu_to_be32(
agsize - be32_to_cpu(arec->ar_startblock));
- error = xfs_bwrite(mp, bp);
- if (error) {
+ error = xfs_bwrite(bp);
+ xfs_buf_relse(bp);
+ if (error)
goto error0;
- }
+
/*
* CNT btree root block
*/
@@ -273,6 +288,10 @@
XFS_AGB_TO_DADDR(mp, agno, XFS_CNT_BLOCK(mp)),
BTOBB(mp->m_sb.sb_blocksize),
XBF_LOCK | XBF_MAPPED);
+ if (!bp) {
+ error = ENOMEM;
+ goto error0;
+ }
block = XFS_BUF_TO_BLOCK(bp);
memset(block, 0, mp->m_sb.sb_blocksize);
block->bb_magic = cpu_to_be32(XFS_ABTC_MAGIC);
@@ -285,10 +304,11 @@
arec->ar_blockcount = cpu_to_be32(
agsize - be32_to_cpu(arec->ar_startblock));
nfree += be32_to_cpu(arec->ar_blockcount);
- error = xfs_bwrite(mp, bp);
- if (error) {
+ error = xfs_bwrite(bp);
+ xfs_buf_relse(bp);
+ if (error)
goto error0;
- }
+
/*
* INO btree root block
*/
@@ -296,6 +316,10 @@
XFS_AGB_TO_DADDR(mp, agno, XFS_IBT_BLOCK(mp)),
BTOBB(mp->m_sb.sb_blocksize),
XBF_LOCK | XBF_MAPPED);
+ if (!bp) {
+ error = ENOMEM;
+ goto error0;
+ }
block = XFS_BUF_TO_BLOCK(bp);
memset(block, 0, mp->m_sb.sb_blocksize);
block->bb_magic = cpu_to_be32(XFS_IBT_MAGIC);
@@ -303,10 +327,10 @@
block->bb_numrecs = 0;
block->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK);
block->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK);
- error = xfs_bwrite(mp, bp);
- if (error) {
+ error = xfs_bwrite(bp);
+ xfs_buf_relse(bp);
+ if (error)
goto error0;
- }
}
xfs_trans_agblocks_delta(tp, nfree);
/*
@@ -396,9 +420,9 @@
* just issue a warning and continue. The real work is
* already done and committed.
*/
- if (!(error = xfs_bwrite(mp, bp))) {
- continue;
- } else {
+ error = xfs_bwrite(bp);
+ xfs_buf_relse(bp);
+ if (error) {
xfs_warn(mp,
"write error %d updating secondary superblock for ag %d",
error, agno);
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index 9f24ec2..169380e 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -150,7 +150,7 @@
/*
* Initialise a new set of inodes.
*/
-STATIC void
+STATIC int
xfs_ialloc_inode_init(
struct xfs_mount *mp,
struct xfs_trans *tp,
@@ -202,8 +202,8 @@
fbuf = xfs_trans_get_buf(tp, mp->m_ddev_targp, d,
mp->m_bsize * blks_per_cluster,
XBF_LOCK);
- ASSERT(!xfs_buf_geterror(fbuf));
-
+ if (!fbuf)
+ return ENOMEM;
/*
* Initialize all inodes in this buffer and then log them.
*
@@ -225,6 +225,7 @@
}
xfs_trans_inode_alloc_buf(tp, fbuf);
}
+ return 0;
}
/*
@@ -369,9 +370,11 @@
* rather than a linear progression to prevent the next generation
* number from being easily guessable.
*/
- xfs_ialloc_inode_init(args.mp, tp, agno, args.agbno, args.len,
- random32());
+ error = xfs_ialloc_inode_init(args.mp, tp, agno, args.agbno,
+ args.len, random32());
+ if (error)
+ return error;
/*
* Convert the results.
*/
@@ -1502,7 +1505,7 @@
return XFS_ERROR(EFSCORRUPTED);
}
- XFS_BUF_SET_VTYPE_REF(*bpp, B_FS_AGI, XFS_AGI_REF);
+ xfs_buf_set_ref(*bpp, XFS_AGI_REF);
xfs_check_agi_unlinked(agi);
return 0;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 7759812..0fa98b1 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -75,7 +75,6 @@
return NULL;
}
- ASSERT(atomic_read(&ip->i_iocount) == 0);
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
@@ -150,7 +149,6 @@
}
/* asserts to verify all state is correct here */
- ASSERT(atomic_read(&ip->i_iocount) == 0);
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 0239a7c..c0237c6 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -190,12 +190,6 @@
}
xfs_inobp_check(mp, bp);
-
- /*
- * Mark the buffer as an inode buffer now that it looks good
- */
- XFS_BUF_SET_VTYPE(bp, B_FS_INO);
-
*bpp = bp;
return 0;
}
@@ -1152,7 +1146,7 @@
/*
* Log the new values stuffed into the inode.
*/
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_log_inode(tp, ip, flags);
/* now that we have an i_mode we can setup inode ops and unlock */
@@ -1187,6 +1181,7 @@
xfs_fileoff_t map_first;
int nimaps;
xfs_bmbt_irec_t imaps[2];
+ int error;
if (!S_ISREG(ip->i_d.di_mode))
return;
@@ -1203,13 +1198,12 @@
* The filesystem could be shutting down, so bmapi may return
* an error.
*/
- if (xfs_bmapi(NULL, ip, map_first,
+ error = xfs_bmapi_read(ip, map_first,
(XFS_B_TO_FSB(mp,
- (xfs_ufsize_t)XFS_MAXIOFFSET(mp)) -
- map_first),
- XFS_BMAPI_ENTIRE, NULL, 0, imaps, &nimaps,
- NULL))
- return;
+ (xfs_ufsize_t)XFS_MAXIOFFSET(mp)) - map_first),
+ imaps, &nimaps, XFS_BMAPI_ENTIRE);
+ if (error)
+ return;
ASSERT(nimaps == 1);
ASSERT(imaps[0].br_startblock == HOLESTARTBLOCK);
}
@@ -1297,7 +1291,7 @@
*/
error = xfs_bmap_finish(&tp, &free_list, &committed);
if (committed)
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
if (error)
goto out_bmap_cancel;
@@ -1313,7 +1307,7 @@
error = xfs_trans_commit(tp, 0);
tp = ntp;
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
if (error)
goto out;
@@ -1644,7 +1638,7 @@
* inodes that are in memory - they all must be marked stale and attached to
* the cluster buffer.
*/
-STATIC void
+STATIC int
xfs_ifree_cluster(
xfs_inode_t *free_ip,
xfs_trans_t *tp,
@@ -1690,6 +1684,8 @@
mp->m_bsize * blks_per_cluster,
XBF_LOCK);
+ if (!bp)
+ return ENOMEM;
/*
* Walk the inodes already attached to the buffer and mark them
* stale. These will all have the flush locks held, so an
@@ -1799,6 +1795,7 @@
}
xfs_perag_put(pag);
+ return 0;
}
/*
@@ -1878,10 +1875,10 @@
dip->di_mode = 0;
if (delete) {
- xfs_ifree_cluster(ip, tp, first_ino);
+ error = xfs_ifree_cluster(ip, tp, first_ino);
}
- return 0;
+ return error;
}
/*
@@ -2472,11 +2469,11 @@
*/
if (bp->b_iodone) {
XFS_BUF_UNDONE(bp);
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
xfs_buf_ioerror(bp, EIO);
xfs_buf_ioend(bp, 0);
} else {
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
xfs_buf_relse(bp);
}
}
@@ -2597,9 +2594,11 @@
goto cluster_corrupt_out;
if (flags & SYNC_WAIT)
- error = xfs_bwrite(mp, bp);
+ error = xfs_bwrite(bp);
else
- xfs_bdwrite(mp, bp);
+ xfs_buf_delwri_queue(bp);
+
+ xfs_buf_relse(bp);
return error;
corrupt_out:
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 2380a4b..760140d1 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -257,7 +257,6 @@
xfs_fsize_t i_size; /* in-memory size */
xfs_fsize_t i_new_size; /* size when write completes */
- atomic_t i_iocount; /* outstanding I/O count */
/* VFS inode */
struct inode i_vnode; /* embedded VFS inode */
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 836ad80..b7cf21b 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -658,10 +658,8 @@
lock_flags = iip->ili_lock_flags;
iip->ili_lock_flags = 0;
- if (lock_flags) {
+ if (lock_flags)
xfs_iunlock(ip, lock_flags);
- IRELE(ip);
- }
}
/*
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index f7ce7de..d99a905 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -1069,7 +1069,7 @@
}
}
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
/*
* Change file ownership. Must be the owner or privileged.
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 091d82b..9afa282 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -208,22 +208,20 @@
if (error)
goto error1;
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
- bmapi_flag = XFS_BMAPI_WRITE;
+ bmapi_flag = 0;
if (offset < ip->i_size || extsz)
bmapi_flag |= XFS_BMAPI_PREALLOC;
/*
- * Issue the xfs_bmapi() call to allocate the blocks.
- *
* From this point onwards we overwrite the imap pointer that the
* caller gave to us.
*/
xfs_bmap_init(&free_list, &firstfsb);
nimaps = 1;
- error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
- &firstfsb, 0, imap, &nimaps, &free_list);
+ error = xfs_bmapi_write(tp, ip, offset_fsb, count_fsb, bmapi_flag,
+ &firstfsb, 0, imap, &nimaps, &free_list);
if (error)
goto error0;
@@ -300,8 +298,8 @@
while (count_fsb > 0) {
imaps = nimaps;
firstblock = NULLFSBLOCK;
- error = xfs_bmapi(NULL, ip, start_fsb, count_fsb, 0,
- &firstblock, 0, imap, &imaps, NULL);
+ error = xfs_bmapi_read(ip, start_fsb, count_fsb, imap, &imaps,
+ 0);
if (error)
return error;
for (n = 0; n < imaps; n++) {
@@ -381,7 +379,6 @@
xfs_fileoff_t last_fsb;
xfs_off_t aligned_offset;
xfs_fileoff_t ioalign;
- xfs_fsblock_t firstblock;
xfs_extlen_t extsz;
int nimaps;
xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
@@ -425,12 +422,8 @@
}
nimaps = XFS_WRITE_IMAPS;
- firstblock = NULLFSBLOCK;
- error = xfs_bmapi(NULL, ip, offset_fsb,
- (xfs_filblks_t)(last_fsb - offset_fsb),
- XFS_BMAPI_DELAY | XFS_BMAPI_WRITE |
- XFS_BMAPI_ENTIRE, &firstblock, 1, imap,
- &nimaps, NULL);
+ error = xfs_bmapi_delay(ip, offset_fsb, last_fsb - offset_fsb,
+ imap, &nimaps, XFS_BMAPI_ENTIRE);
switch (error) {
case 0:
case ENOSPC:
@@ -535,7 +528,7 @@
return XFS_ERROR(error);
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
xfs_bmap_init(&free_list, &first_block);
@@ -587,14 +580,12 @@
}
/*
- * Go get the actual blocks.
- *
* From this point onwards we overwrite the imap
* pointer that the caller gave to us.
*/
- error = xfs_bmapi(tp, ip, map_start_fsb, count_fsb,
- XFS_BMAPI_WRITE, &first_block, 1,
- imap, &nimaps, &free_list);
+ error = xfs_bmapi_write(tp, ip, map_start_fsb,
+ count_fsb, 0, &first_block, 1,
+ imap, &nimaps, &free_list);
if (error)
goto trans_cancel;
@@ -701,15 +692,15 @@
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
/*
* Modify the unwritten extent state of the buffer.
*/
xfs_bmap_init(&free_list, &firstfsb);
nimaps = 1;
- error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
- XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
+ error = xfs_bmapi_write(tp, ip, offset_fsb, count_fsb,
+ XFS_BMAPI_CONVERT, &firstfsb,
1, &imap, &nimaps, &free_list);
if (error)
goto error_on_bmapi_transaction;
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index 28856ac..23ce927 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -466,7 +466,7 @@
trace_xfs_getattr(ip);
if (XFS_FORCED_SHUTDOWN(mp))
- return XFS_ERROR(EIO);
+ return -XFS_ERROR(EIO);
stat->size = XFS_ISIZE(ip);
stat->dev = inode->i_sb->s_dev;
@@ -612,7 +612,7 @@
}
}
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
/*
* Change file ownership. Must be the owner or privileged.
@@ -834,16 +834,16 @@
* care about here.
*/
if (ip->i_size != ip->i_d.di_size && iattr->ia_size > ip->i_d.di_size) {
- error = xfs_flush_pages(ip, ip->i_d.di_size, iattr->ia_size,
- XBF_ASYNC, FI_NONE);
+ error = xfs_flush_pages(ip, ip->i_d.di_size, iattr->ia_size, 0,
+ FI_NONE);
if (error)
goto out_unlock;
}
/*
- * Wait for all I/O to complete.
+ * Wait for all direct I/O to complete.
*/
- xfs_ioend_wait(ip);
+ inode_dio_wait(inode);
error = -block_truncate_page(inode->i_mapping, iattr->ia_size,
xfs_get_blocks);
@@ -864,7 +864,7 @@
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
/*
* Only change the c/mtime if we are changing the size or we are
@@ -1153,7 +1153,7 @@
hlist_add_fake(&inode->i_hash);
inode->i_mode = ip->i_d.di_mode;
- inode->i_nlink = ip->i_d.di_nlink;
+ set_nlink(inode, ip->i_d.di_nlink);
inode->i_uid = ip->i_d.di_uid;
inode->i_gid = ip->i_d.di_gid;
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 3a8d4f6..2758a62 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -880,8 +880,8 @@
*/
if (XFS_TEST_ERROR((xfs_buf_geterror(bp)), l->l_mp,
XFS_ERRTAG_IODONE_IOERR, XFS_RANDOM_IODONE_IOERR)) {
- xfs_ioerror_alert("xlog_iodone", l->l_mp, bp, XFS_BUF_ADDR(bp));
- XFS_BUF_STALE(bp);
+ xfs_buf_ioerror_alert(bp, __func__);
+ xfs_buf_stale(bp);
xfs_force_shutdown(l->l_mp, SHUTDOWN_LOG_IO_ERROR);
/*
* This flag will be propagated to the trans-committed
@@ -1047,7 +1047,7 @@
xlog_get_iclog_buffer_size(mp, log);
error = ENOMEM;
- bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp);
+ bp = xfs_buf_alloc(mp->m_logdev_targp, 0, log->l_iclog_size, 0);
if (!bp)
goto out_free_log;
bp->b_iodone = xlog_iodone;
@@ -1247,7 +1247,7 @@
if (iclog->ic_state & XLOG_STATE_IOERROR) {
xfs_buf_ioerror(bp, EIO);
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
xfs_buf_ioend(bp, 0);
/*
* It would seem logical to return EIO here, but we rely on
@@ -1387,9 +1387,9 @@
*/
XFS_BUF_WRITE(bp);
- if ((error = xlog_bdstrat(bp))) {
- xfs_ioerror_alert("xlog_sync", log->l_mp, bp,
- XFS_BUF_ADDR(bp));
+ error = xlog_bdstrat(bp);
+ if (error) {
+ xfs_buf_ioerror_alert(bp, "xlog_sync");
return error;
}
if (split) {
@@ -1423,9 +1423,9 @@
/* account for internal log which doesn't start at block #0 */
XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
XFS_BUF_WRITE(bp);
- if ((error = xlog_bdstrat(bp))) {
- xfs_ioerror_alert("xlog_sync (split)", log->l_mp,
- bp, XFS_BUF_ADDR(bp));
+ error = xlog_bdstrat(bp);
+ if (error) {
+ xfs_buf_ioerror_alert(bp, "xlog_sync (split)");
return error;
}
}
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index a199dbc..541a508 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -183,8 +183,7 @@
xfsbdstrat(log->l_mp, bp);
error = xfs_buf_iowait(bp);
if (error)
- xfs_ioerror_alert("xlog_bread", log->l_mp,
- bp, XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp, __func__);
return error;
}
@@ -268,9 +267,10 @@
xfs_buf_lock(bp);
XFS_BUF_SET_COUNT(bp, BBTOB(nbblks));
- if ((error = xfs_bwrite(log->l_mp, bp)))
- xfs_ioerror_alert("xlog_bwrite", log->l_mp,
- bp, XFS_BUF_ADDR(bp));
+ error = xfs_bwrite(bp);
+ if (error)
+ xfs_buf_ioerror_alert(bp, __func__);
+ xfs_buf_relse(bp);
return error;
}
@@ -361,9 +361,7 @@
* We're not going to bother about retrying
* this during recovery. One strike!
*/
- xfs_ioerror_alert("xlog_recover_iodone",
- bp->b_target->bt_mount, bp,
- XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp, __func__);
xfs_force_shutdown(bp->b_target->bt_mount,
SHUTDOWN_META_IO_ERROR);
}
@@ -2135,8 +2133,7 @@
return XFS_ERROR(ENOMEM);
error = bp->b_error;
if (error) {
- xfs_ioerror_alert("xlog_recover_do..(read#1)", mp,
- bp, buf_f->blf_blkno);
+ xfs_buf_ioerror_alert(bp, "xlog_recover_do..(read#1)");
xfs_buf_relse(bp);
return error;
}
@@ -2171,15 +2168,16 @@
be16_to_cpu(*((__be16 *)xfs_buf_offset(bp, 0))) &&
(XFS_BUF_COUNT(bp) != MAX(log->l_mp->m_sb.sb_blocksize,
(__uint32_t)XFS_INODE_CLUSTER_SIZE(log->l_mp)))) {
- XFS_BUF_STALE(bp);
- error = xfs_bwrite(mp, bp);
+ xfs_buf_stale(bp);
+ error = xfs_bwrite(bp);
} else {
ASSERT(bp->b_target->bt_mount == mp);
bp->b_iodone = xlog_recover_iodone;
- xfs_bdwrite(mp, bp);
+ xfs_buf_delwri_queue(bp);
}
- return (error);
+ xfs_buf_relse(bp);
+ return error;
}
STATIC int
@@ -2230,8 +2228,7 @@
}
error = bp->b_error;
if (error) {
- xfs_ioerror_alert("xlog_recover_do..(read#2)", mp,
- bp, in_f->ilf_blkno);
+ xfs_buf_ioerror_alert(bp, "xlog_recover_do..(read#2)");
xfs_buf_relse(bp);
goto error;
}
@@ -2439,7 +2436,8 @@
write_inode_buffer:
ASSERT(bp->b_target->bt_mount == mp);
bp->b_iodone = xlog_recover_iodone;
- xfs_bdwrite(mp, bp);
+ xfs_buf_delwri_queue(bp);
+ xfs_buf_relse(bp);
error:
if (need_free)
kmem_free(in_f);
@@ -2537,8 +2535,7 @@
XFS_FSB_TO_BB(mp, dq_f->qlf_len),
0, &bp);
if (error) {
- xfs_ioerror_alert("xlog_recover_do..(read#3)", mp,
- bp, dq_f->qlf_blkno);
+ xfs_buf_ioerror_alert(bp, "xlog_recover_do..(read#3)");
return error;
}
ASSERT(bp);
@@ -2561,7 +2558,8 @@
ASSERT(dq_f->qlf_size == 2);
ASSERT(bp->b_target->bt_mount == mp);
bp->b_iodone = xlog_recover_iodone;
- xfs_bdwrite(mp, bp);
+ xfs_buf_delwri_queue(bp);
+ xfs_buf_relse(bp);
return (0);
}
@@ -3656,7 +3654,7 @@
return error;
}
- XFS_bflush(log->l_mp->m_ddev_targp);
+ xfs_flush_buftarg(log->l_mp->m_ddev_targp, 1);
/*
* If IO errors happened during recovery, bail out.
@@ -3689,8 +3687,7 @@
xfsbdstrat(log->l_mp, bp);
error = xfs_buf_iowait(bp);
if (error) {
- xfs_ioerror_alert("xlog_do_recover",
- log->l_mp, bp, XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp, __func__);
ASSERT(0);
xfs_buf_relse(bp);
return error;
diff --git a/fs/xfs/xfs_message.h b/fs/xfs/xfs_message.h
index 7fb7ea0..56dc0c1 100644
--- a/fs/xfs/xfs_message.h
+++ b/fs/xfs/xfs_message.h
@@ -3,31 +3,29 @@
struct xfs_mount;
-extern void xfs_emerg(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern void xfs_alert(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern void xfs_alert_tag(const struct xfs_mount *mp, int tag,
- const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern void xfs_crit(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern void xfs_err(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern void xfs_warn(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern void xfs_notice(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern void xfs_info(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+void xfs_emerg(const struct xfs_mount *mp, const char *fmt, ...);
+extern __printf(2, 3)
+void xfs_alert(const struct xfs_mount *mp, const char *fmt, ...);
+extern __printf(3, 4)
+void xfs_alert_tag(const struct xfs_mount *mp, int tag, const char *fmt, ...);
+extern __printf(2, 3)
+void xfs_crit(const struct xfs_mount *mp, const char *fmt, ...);
+extern __printf(2, 3)
+void xfs_err(const struct xfs_mount *mp, const char *fmt, ...);
+extern __printf(2, 3)
+void xfs_warn(const struct xfs_mount *mp, const char *fmt, ...);
+extern __printf(2, 3)
+void xfs_notice(const struct xfs_mount *mp, const char *fmt, ...);
+extern __printf(2, 3)
+void xfs_info(const struct xfs_mount *mp, const char *fmt, ...);
#ifdef DEBUG
-extern void xfs_debug(const struct xfs_mount *mp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+void xfs_debug(const struct xfs_mount *mp, const char *fmt, ...);
#else
-static inline void
-__attribute__ ((format (printf, 2, 3)))
-xfs_debug(const struct xfs_mount *mp, const char *fmt, ...)
+static inline __printf(2, 3)
+void xfs_debug(const struct xfs_mount *mp, const char *fmt, ...)
{
}
#endif
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 0081657..d06afbc 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -44,9 +44,6 @@
#include "xfs_trace.h"
-STATIC void xfs_unmountfs_wait(xfs_mount_t *);
-
-
#ifdef HAVE_PERCPU_SB
STATIC void xfs_icsb_balance_counter(xfs_mount_t *, xfs_sb_field_t,
int);
@@ -1484,7 +1481,7 @@
* state as much as possible.
*/
xfs_reclaim_inodes(mp, 0);
- XFS_bflush(mp->m_ddev_targp);
+ xfs_flush_buftarg(mp->m_ddev_targp, 1);
xfs_reclaim_inodes(mp, SYNC_WAIT);
xfs_qm_unmount(mp);
@@ -1496,11 +1493,6 @@
*/
xfs_log_force(mp, XFS_LOG_SYNC);
- xfs_binval(mp->m_ddev_targp);
- if (mp->m_rtdev_targp) {
- xfs_binval(mp->m_rtdev_targp);
- }
-
/*
* Unreserve any blocks we have so that when we unmount we don't account
* the reserved free space as used. This is really only necessary for
@@ -1526,7 +1518,16 @@
xfs_warn(mp, "Unable to update superblock counters. "
"Freespace may not be correct on next mount.");
xfs_unmountfs_writesb(mp);
- xfs_unmountfs_wait(mp); /* wait for async bufs */
+
+ /*
+ * Make sure all buffers have been flushed and completed before
+ * unmounting the log.
+ */
+ error = xfs_flush_buftarg(mp->m_ddev_targp, 1);
+ if (error)
+ xfs_warn(mp, "%d busy buffers during unmount.", error);
+ xfs_wait_buftarg(mp->m_ddev_targp);
+
xfs_log_unmount_write(mp);
xfs_log_unmount(mp);
xfs_uuid_unmount(mp);
@@ -1537,16 +1538,6 @@
xfs_free_perag(mp);
}
-STATIC void
-xfs_unmountfs_wait(xfs_mount_t *mp)
-{
- if (mp->m_logdev_targp != mp->m_ddev_targp)
- xfs_wait_buftarg(mp->m_logdev_targp);
- if (mp->m_rtdev_targp)
- xfs_wait_buftarg(mp->m_rtdev_targp);
- xfs_wait_buftarg(mp->m_ddev_targp);
-}
-
int
xfs_fs_writable(xfs_mount_t *mp)
{
@@ -1612,15 +1603,14 @@
XFS_BUF_UNDONE(sbp);
XFS_BUF_UNREAD(sbp);
- XFS_BUF_UNDELAYWRITE(sbp);
+ xfs_buf_delwri_dequeue(sbp);
XFS_BUF_WRITE(sbp);
XFS_BUF_UNASYNC(sbp);
ASSERT(sbp->b_target == mp->m_ddev_targp);
xfsbdstrat(mp, sbp);
error = xfs_buf_iowait(sbp);
if (error)
- xfs_ioerror_alert("xfs_unmountfs_writesb",
- mp, sbp, XFS_BUF_ADDR(sbp));
+ xfs_buf_ioerror_alert(sbp, __func__);
xfs_buf_relse(sbp);
}
return error;
diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c
index 9a0aa76..5cff443 100644
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -1296,7 +1296,8 @@
break;
xfs_qm_reset_dqcounts(mp, bp, firstid, type);
- xfs_bdwrite(mp, bp);
+ xfs_buf_delwri_queue(bp);
+ xfs_buf_relse(bp);
/*
* goto the next block.
*/
@@ -1346,11 +1347,8 @@
* the inode is never added to the transaction.
*/
xfs_ilock(qip, XFS_ILOCK_SHARED);
- error = xfs_bmapi(NULL, qip, lblkno,
- maxlblkcnt - lblkno,
- XFS_BMAPI_METADATA,
- NULL,
- 0, map, &nmaps, NULL);
+ error = xfs_bmapi_read(qip, lblkno, maxlblkcnt - lblkno,
+ map, &nmaps, 0);
xfs_iunlock(qip, XFS_ILOCK_SHARED);
if (error)
break;
@@ -1683,7 +1681,7 @@
* quotacheck'd stamp on the superblock. So, here we do a synchronous
* flush.
*/
- XFS_bflush(mp->m_ddev_targp);
+ xfs_flush_buftarg(mp->m_ddev_targp, 1);
/*
* If one type of quotas is off, then it will lose its
diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c
index 609246f..5cc3dde 100644
--- a/fs/xfs/xfs_qm_syscalls.c
+++ b/fs/xfs/xfs_qm_syscalls.c
@@ -261,7 +261,7 @@
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
error = xfs_itruncate_data(&tp, ip, 0);
if (error) {
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index df78c29..866de27 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -170,12 +170,12 @@
* we can rely on either trans_commit or trans_cancel to unlock
* them.
*/
- xfs_trans_ijoin_ref(tp, src_dp, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, src_dp, XFS_ILOCK_EXCL);
if (new_parent)
- xfs_trans_ijoin_ref(tp, target_dp, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, src_ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, target_dp, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, src_ip, XFS_ILOCK_EXCL);
if (target_ip)
- xfs_trans_ijoin_ref(tp, target_ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, target_ip, XFS_ILOCK_EXCL);
/*
* If we are using project inheritance, we only allow renames
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 35561a5..87323f1 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -112,7 +112,7 @@
* Lock the inode.
*/
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_bmap_init(&flist, &firstblock);
/*
@@ -120,9 +120,9 @@
*/
nmap = 1;
cancelflags |= XFS_TRANS_ABORT;
- error = xfs_bmapi(tp, ip, oblocks, nblocks - oblocks,
- XFS_BMAPI_WRITE | XFS_BMAPI_METADATA, &firstblock,
- resblks, &map, &nmap, &flist);
+ error = xfs_bmapi_write(tp, ip, oblocks, nblocks - oblocks,
+ XFS_BMAPI_METADATA, &firstblock,
+ resblks, &map, &nmap, &flist);
if (!error && nmap < 1)
error = XFS_ERROR(ENOSPC);
if (error)
@@ -155,7 +155,7 @@
* Lock the bitmap inode.
*/
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
/*
* Get a buffer for the block.
*/
@@ -856,33 +856,23 @@
xfs_buf_t **bpp) /* output: buffer for the block */
{
xfs_buf_t *bp; /* block buffer, result */
- xfs_daddr_t d; /* disk addr of block */
- int error; /* error value */
- xfs_fsblock_t fsb; /* fs block number for block */
xfs_inode_t *ip; /* bitmap or summary inode */
+ xfs_bmbt_irec_t map;
+ int nmap;
+ int error; /* error value */
ip = issum ? mp->m_rsumip : mp->m_rbmip;
- /*
- * Map from the file offset (block) and inode number to the
- * file system block.
- */
- error = xfs_bmapi_single(tp, ip, XFS_DATA_FORK, &fsb, block);
- if (error) {
+
+ error = xfs_bmapi_read(ip, block, 1, &map, &nmap, XFS_DATA_FORK);
+ if (error)
return error;
- }
- ASSERT(fsb != NULLFSBLOCK);
- /*
- * Convert to disk address for buffer cache.
- */
- d = XFS_FSB_TO_DADDR(mp, fsb);
- /*
- * Read the buffer.
- */
- error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, d,
+
+ ASSERT(map.br_startblock != NULLFSBLOCK);
+ error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp,
+ XFS_FSB_TO_DADDR(mp, map.br_startblock),
mp->m_bsize, 0, &bp);
- if (error) {
+ if (error)
return error;
- }
ASSERT(!xfs_buf_geterror(bp));
*bpp = bp;
return 0;
@@ -1970,7 +1960,7 @@
* Lock out other callers by grabbing the bitmap inode lock.
*/
xfs_ilock(mp->m_rbmip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, mp->m_rbmip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, mp->m_rbmip, XFS_ILOCK_EXCL);
/*
* Update the bitmap inode's size.
*/
@@ -1982,7 +1972,7 @@
* Get the summary inode into the transaction.
*/
xfs_ilock(mp->m_rsumip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, mp->m_rsumip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, mp->m_rsumip, XFS_ILOCK_EXCL);
/*
* Update the summary inode's size.
*/
@@ -2153,7 +2143,7 @@
* Synchronize by locking the bitmap inode.
*/
xfs_ilock(mp->m_rbmip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, mp->m_rbmip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, mp->m_rbmip, XFS_ILOCK_EXCL);
#if defined(__KERNEL__) && defined(DEBUG)
/*
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index c96a8a0..597d044 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -92,24 +92,6 @@
}
/*
- * Prints out an ALERT message about I/O error.
- */
-void
-xfs_ioerror_alert(
- char *func,
- struct xfs_mount *mp,
- xfs_buf_t *bp,
- xfs_daddr_t blkno)
-{
- xfs_alert(mp,
- "I/O error occurred: meta-data dev %s block 0x%llx"
- " (\"%s\") error %d buf count %zd",
- xfs_buf_target_name(bp->b_target),
- (__uint64_t)blkno, func,
- bp->b_error, XFS_BUF_COUNT(bp));
-}
-
-/*
* This isn't an absolute requirement, but it is
* just a good idea to call xfs_read_buf instead of
* directly doing a read_buf call. For one, we shouldn't
@@ -143,14 +125,13 @@
} else {
*bpp = NULL;
if (error) {
- xfs_ioerror_alert("xfs_read_buf", mp, bp, XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp, __func__);
} else {
error = XFS_ERROR(EIO);
}
if (bp) {
XFS_BUF_UNDONE(bp);
- XFS_BUF_UNDELAYWRITE(bp);
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
/*
* brelse clears B_ERROR and b_error
*/
diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h
index 11c41ec..bbdb9ad 100644
--- a/fs/xfs/xfs_rw.h
+++ b/fs/xfs/xfs_rw.h
@@ -42,8 +42,6 @@
extern int xfs_read_buf(struct xfs_mount *mp, xfs_buftarg_t *btp,
xfs_daddr_t blkno, int len, uint flags,
struct xfs_buf **bpp);
-extern void xfs_ioerror_alert(char *func, struct xfs_mount *mp,
- xfs_buf_t *bp, xfs_daddr_t blkno);
extern xfs_extlen_t xfs_get_extsz_hint(struct xfs_inode *ip);
#endif /* __XFS_RW_H__ */
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 5cf06b8..3eca58f 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -796,8 +796,6 @@
if (is_bad_inode(inode))
goto out_reclaim;
- xfs_ioend_wait(ip);
-
ASSERT(XFS_FORCED_SHUTDOWN(ip->i_mount) || ip->i_delayed_blks == 0);
/*
@@ -837,7 +835,6 @@
inode_init_once(VFS_I(ip));
/* xfs inode */
- atomic_set(&ip->i_iocount, 0);
atomic_set(&ip->i_pincount, 0);
spin_lock_init(&ip->i_flags_lock);
init_waitqueue_head(&ip->i_ipin_wait);
@@ -887,7 +884,7 @@
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
return xfs_trans_commit(tp, 0);
}
@@ -914,9 +911,8 @@
* of forcing it all the way to stable storage using a
* synchronous transaction we let the log force inside the
* ->sync_fs call do that for thus, which reduces the number
- * of synchronous log foces dramatically.
+ * of synchronous log forces dramatically.
*/
- xfs_ioend_wait(ip);
error = xfs_log_inode(ip);
if (error)
goto out;
@@ -1019,7 +1015,7 @@
*/
xfs_filestream_unmount(mp);
- XFS_bflush(mp->m_ddev_targp);
+ xfs_flush_buftarg(mp->m_ddev_targp, 1);
xfs_unmountfs(mp);
xfs_freesb(mp);
@@ -1443,7 +1439,7 @@
*/
xfs_filestream_unmount(mp);
- XFS_bflush(mp->m_ddev_targp);
+ xfs_flush_buftarg(mp->m_ddev_targp, 1);
xfs_unmountfs(mp);
goto out_free_sb;
@@ -1670,7 +1666,6 @@
printk(KERN_INFO XFS_VERSION_STRING " with "
XFS_BUILD_OPTIONS " enabled\n");
- xfs_ioend_init();
xfs_dir_startup();
error = xfs_init_zones();
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index 4604f90..aa3dc1a 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -227,21 +227,17 @@
int error = 0;
if (!mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
- goto out_wait;
+ return 0;
if (!xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED)) {
if (flags & SYNC_TRYLOCK)
- goto out_wait;
+ return 0;
xfs_ilock(ip, XFS_IOLOCK_SHARED);
}
error = xfs_flush_pages(ip, 0, -1, (flags & SYNC_WAIT) ?
0 : XBF_ASYNC, FI_NONE);
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-
- out_wait:
- if (flags & SYNC_WAIT)
- xfs_ioend_wait(ip);
return error;
}
@@ -322,6 +318,7 @@
struct xfs_mount *mp)
{
struct xfs_buf *bp;
+ int error;
/*
* If the buffer is pinned then push on the log so we won't get stuck
@@ -334,8 +331,9 @@
bp = xfs_getsb(mp, 0);
if (xfs_buf_ispinned(bp))
xfs_log_force(mp, 0);
-
- return xfs_bwrite(mp, bp);
+ error = xfs_bwrite(bp);
+ xfs_buf_relse(bp);
+ return error;
}
/*
@@ -379,7 +377,7 @@
/* flush data-only devices */
if (mp->m_rtdev_targp)
- XFS_bflush(mp->m_rtdev_targp);
+ xfs_flush_buftarg(mp->m_rtdev_targp, 1);
return error ? error : error2;
}
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index 690fc7a..f1d2802 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -30,6 +30,7 @@
struct xfs_da_args;
struct xfs_da_node_entry;
struct xfs_dquot;
+struct xfs_log_item;
struct xlog_ticket;
struct log;
struct xlog_recover;
@@ -320,7 +321,6 @@
DEFINE_BUF_EVENT(xfs_buf_iodone);
DEFINE_BUF_EVENT(xfs_buf_iorequest);
DEFINE_BUF_EVENT(xfs_buf_bawrite);
-DEFINE_BUF_EVENT(xfs_buf_bdwrite);
DEFINE_BUF_EVENT(xfs_buf_lock);
DEFINE_BUF_EVENT(xfs_buf_lock_done);
DEFINE_BUF_EVENT(xfs_buf_trylock);
@@ -577,6 +577,7 @@
DEFINE_INODE_EVENT(xfs_file_ioctl);
DEFINE_INODE_EVENT(xfs_file_compat_ioctl);
DEFINE_INODE_EVENT(xfs_ioctl_setattr);
+DEFINE_INODE_EVENT(xfs_dir_fsync);
DEFINE_INODE_EVENT(xfs_file_fsync);
DEFINE_INODE_EVENT(xfs_destroy_inode);
DEFINE_INODE_EVENT(xfs_write_inode);
@@ -853,6 +854,42 @@
DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_exit);
DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_sub);
+DECLARE_EVENT_CLASS(xfs_log_item_class,
+ TP_PROTO(struct xfs_log_item *lip),
+ TP_ARGS(lip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(void *, lip)
+ __field(uint, type)
+ __field(uint, flags)
+ __field(xfs_lsn_t, lsn)
+ ),
+ TP_fast_assign(
+ __entry->dev = lip->li_mountp->m_super->s_dev;
+ __entry->lip = lip;
+ __entry->type = lip->li_type;
+ __entry->flags = lip->li_flags;
+ __entry->lsn = lip->li_lsn;
+ ),
+ TP_printk("dev %d:%d lip 0x%p lsn %d/%d type %s flags %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->lip,
+ CYCLE_LSN(__entry->lsn), BLOCK_LSN(__entry->lsn),
+ __print_symbolic(__entry->type, XFS_LI_TYPE_DESC),
+ __print_flags(__entry->flags, "|", XFS_LI_FLAGS))
+)
+
+#define DEFINE_LOG_ITEM_EVENT(name) \
+DEFINE_EVENT(xfs_log_item_class, name, \
+ TP_PROTO(struct xfs_log_item *lip), \
+ TP_ARGS(lip))
+DEFINE_LOG_ITEM_EVENT(xfs_ail_push);
+DEFINE_LOG_ITEM_EVENT(xfs_ail_pushbuf);
+DEFINE_LOG_ITEM_EVENT(xfs_ail_pushbuf_pinned);
+DEFINE_LOG_ITEM_EVENT(xfs_ail_pinned);
+DEFINE_LOG_ITEM_EVENT(xfs_ail_locked);
+
+
DECLARE_EVENT_CLASS(xfs_file_class,
TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags),
TP_ARGS(ip, count, offset, flags),
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index efc147f..1f35b2f 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -1790,9 +1790,7 @@
}
/*
- * xfs_trans_commit
- *
- * Commit the given transaction to the log a/synchronously.
+ * Commit the given transaction to the log.
*
* XFS disk error handling mechanism is not based on a typical
* transaction abort mechanism. Logically after the filesystem
@@ -1804,10 +1802,9 @@
* Do not reference the transaction structure after this call.
*/
int
-_xfs_trans_commit(
+xfs_trans_commit(
struct xfs_trans *tp,
- uint flags,
- int *log_flushed)
+ uint flags)
{
struct xfs_mount *mp = tp->t_mountp;
xfs_lsn_t commit_lsn = -1;
@@ -1866,7 +1863,7 @@
if (sync) {
if (!error) {
error = _xfs_log_force_lsn(mp, commit_lsn,
- XFS_LOG_SYNC, log_flushed);
+ XFS_LOG_SYNC, NULL);
}
XFS_STATS_INC(xs_trans_sync);
} else {
@@ -2021,6 +2018,6 @@
if (error)
return error;
- xfs_trans_ijoin(trans, dp);
+ xfs_trans_ijoin(trans, dp, 0);
return 0;
}
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 53597f4..603f3eb 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -470,8 +470,7 @@
void xfs_trans_dquot_buf(xfs_trans_t *, struct xfs_buf *, uint);
void xfs_trans_inode_alloc_buf(xfs_trans_t *, struct xfs_buf *);
void xfs_trans_ichgtime(struct xfs_trans *, struct xfs_inode *, int);
-void xfs_trans_ijoin_ref(struct xfs_trans *, struct xfs_inode *, uint);
-void xfs_trans_ijoin(struct xfs_trans *, struct xfs_inode *);
+void xfs_trans_ijoin(struct xfs_trans *, struct xfs_inode *, uint);
void xfs_trans_log_buf(xfs_trans_t *, struct xfs_buf *, uint, uint);
void xfs_trans_log_inode(xfs_trans_t *, struct xfs_inode *, uint);
struct xfs_efi_log_item *xfs_trans_get_efi(xfs_trans_t *, uint);
@@ -487,10 +486,7 @@
struct xfs_efd_log_item *,
xfs_fsblock_t,
xfs_extlen_t);
-int _xfs_trans_commit(xfs_trans_t *,
- uint flags,
- int *);
-#define xfs_trans_commit(tp, flags) _xfs_trans_commit(tp, flags, NULL)
+int xfs_trans_commit(xfs_trans_t *, uint flags);
void xfs_trans_cancel(xfs_trans_t *, int);
int xfs_trans_ail_init(struct xfs_mount *);
void xfs_trans_ail_destroy(struct xfs_mount *);
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index 3a1e7ca5..ed9252b 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -26,6 +26,7 @@
#include "xfs_ag.h"
#include "xfs_mount.h"
#include "xfs_trans_priv.h"
+#include "xfs_trace.h"
#include "xfs_error.h"
#ifdef DEBUG
@@ -364,12 +365,24 @@
xfs_lsn_t lsn;
xfs_lsn_t target;
long tout = 10;
- int flush_log = 0;
int stuck = 0;
int count = 0;
int push_xfsbufd = 0;
+ /*
+ * If last time we ran we encountered pinned items, force the log first
+ * and wait for it before pushing again.
+ */
spin_lock(&ailp->xa_lock);
+ if (ailp->xa_last_pushed_lsn == 0 && ailp->xa_log_flush &&
+ !list_empty(&ailp->xa_ail)) {
+ ailp->xa_log_flush = 0;
+ spin_unlock(&ailp->xa_lock);
+ XFS_STATS_INC(xs_push_ail_flush);
+ xfs_log_force(mp, XFS_LOG_SYNC);
+ spin_lock(&ailp->xa_lock);
+ }
+
target = ailp->xa_target;
lip = xfs_trans_ail_cursor_first(ailp, &cur, ailp->xa_last_pushed_lsn);
if (!lip || XFS_FORCED_SHUTDOWN(mp)) {
@@ -413,16 +426,20 @@
switch (lock_result) {
case XFS_ITEM_SUCCESS:
XFS_STATS_INC(xs_push_ail_success);
+ trace_xfs_ail_push(lip);
+
IOP_PUSH(lip);
ailp->xa_last_pushed_lsn = lsn;
break;
case XFS_ITEM_PUSHBUF:
XFS_STATS_INC(xs_push_ail_pushbuf);
+ trace_xfs_ail_pushbuf(lip);
if (!IOP_PUSHBUF(lip)) {
+ trace_xfs_ail_pushbuf_pinned(lip);
stuck++;
- flush_log = 1;
+ ailp->xa_log_flush++;
} else {
ailp->xa_last_pushed_lsn = lsn;
}
@@ -431,12 +448,15 @@
case XFS_ITEM_PINNED:
XFS_STATS_INC(xs_push_ail_pinned);
+ trace_xfs_ail_pinned(lip);
+
stuck++;
- flush_log = 1;
+ ailp->xa_log_flush++;
break;
case XFS_ITEM_LOCKED:
XFS_STATS_INC(xs_push_ail_locked);
+ trace_xfs_ail_locked(lip);
stuck++;
break;
@@ -476,16 +496,6 @@
xfs_trans_ail_cursor_done(ailp, &cur);
spin_unlock(&ailp->xa_lock);
- if (flush_log) {
- /*
- * If something we need to push out was pinned, then
- * push out the log so it will become unpinned and
- * move forward in the AIL.
- */
- XFS_STATS_INC(xs_push_ail_flush);
- xfs_log_force(mp, 0);
- }
-
if (push_xfsbufd) {
/* we've got delayed write buffers to flush */
wake_up_process(mp->m_ddev_targp->bt_task);
@@ -496,6 +506,7 @@
if (!count) {
/* We're past our target or empty, so idle */
ailp->xa_last_pushed_lsn = 0;
+ ailp->xa_log_flush = 0;
tout = 50;
} else if (XFS_LSN_CMP(lsn, target) >= 0) {
@@ -514,9 +525,13 @@
* were stuck.
*
* Backoff a bit more to allow some I/O to complete before
- * continuing from where we were.
+ * restarting from the start of the AIL. This prevents us
+ * from spinning on the same items, and if they are pinned will
+ * all the restart to issue a log force to unpin the stuck
+ * items.
*/
tout = 20;
+ ailp->xa_last_pushed_lsn = 0;
}
return tout;
diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c
index 137e2b9..475a4de 100644
--- a/fs/xfs/xfs_trans_buf.c
+++ b/fs/xfs/xfs_trans_buf.c
@@ -160,8 +160,10 @@
bp = xfs_trans_buf_item_match(tp, target_dev, blkno, len);
if (bp != NULL) {
ASSERT(xfs_buf_islocked(bp));
- if (XFS_FORCED_SHUTDOWN(tp->t_mountp))
- XFS_BUF_SUPER_STALE(bp);
+ if (XFS_FORCED_SHUTDOWN(tp->t_mountp)) {
+ xfs_buf_stale(bp);
+ XFS_BUF_DONE(bp);
+ }
/*
* If the buffer is stale then it was binval'ed
@@ -294,8 +296,7 @@
if (bp->b_error) {
error = bp->b_error;
- xfs_ioerror_alert("xfs_trans_read_buf", mp,
- bp, blkno);
+ xfs_buf_ioerror_alert(bp, __func__);
xfs_buf_relse(bp);
return error;
}
@@ -337,8 +338,7 @@
xfsbdstrat(tp->t_mountp, bp);
error = xfs_buf_iowait(bp);
if (error) {
- xfs_ioerror_alert("xfs_trans_read_buf", mp,
- bp, blkno);
+ xfs_buf_ioerror_alert(bp, __func__);
xfs_buf_relse(bp);
/*
* We can gracefully recover from most read
@@ -387,9 +387,9 @@
}
if (bp->b_error) {
error = bp->b_error;
- XFS_BUF_SUPER_STALE(bp);
- xfs_ioerror_alert("xfs_trans_read_buf", mp,
- bp, blkno);
+ xfs_buf_stale(bp);
+ XFS_BUF_DONE(bp);
+ xfs_buf_ioerror_alert(bp, __func__);
if (tp->t_flags & XFS_TRANS_DIRTY)
xfs_force_shutdown(tp->t_mountp, SHUTDOWN_META_IO_ERROR);
xfs_buf_relse(bp);
@@ -643,13 +643,14 @@
* inside the b_bdstrat callback so that this won't get written to
* disk.
*/
- XFS_BUF_DELAYWRITE(bp);
XFS_BUF_DONE(bp);
ASSERT(atomic_read(&bip->bli_refcount) > 0);
bp->b_iodone = xfs_buf_iodone_callbacks;
bip->bli_item.li_cb = xfs_buf_iodone;
+ xfs_buf_delwri_queue(bp);
+
trace_xfs_trans_log_buf(bip);
/*
@@ -738,8 +739,7 @@
* We set the stale bit in the buffer as well since we're getting
* rid of it.
*/
- XFS_BUF_UNDELAYWRITE(bp);
- XFS_BUF_STALE(bp);
+ xfs_buf_stale(bp);
bip->bli_flags |= XFS_BLI_STALE;
bip->bli_flags &= ~(XFS_BLI_INODE_BUF | XFS_BLI_LOGGED | XFS_BLI_DIRTY);
bip->bli_format.blf_flags &= ~XFS_BLF_INODE_BUF;
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index c8dea2fd..32f0288 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -47,11 +47,13 @@
* Add a locked inode to the transaction.
*
* The inode must be locked, and it cannot be associated with any transaction.
+ * If lock_flags is non-zero the inode will be unlocked on transaction commit.
*/
void
xfs_trans_ijoin(
struct xfs_trans *tp,
- struct xfs_inode *ip)
+ struct xfs_inode *ip,
+ uint lock_flags)
{
xfs_inode_log_item_t *iip;
@@ -59,7 +61,9 @@
if (ip->i_itemp == NULL)
xfs_inode_item_init(ip, ip->i_mount);
iip = ip->i_itemp;
+
ASSERT(iip->ili_lock_flags == 0);
+ iip->ili_lock_flags = lock_flags;
/*
* Get a log_item_desc to point at the new item.
@@ -70,25 +74,6 @@
}
/*
- * Add a locked inode to the transaction.
- *
- *
- * Grabs a reference to the inode which will be dropped when the transaction
- * is committed. The inode will also be unlocked at that point. The inode
- * must be locked, and it cannot be associated with any transaction.
- */
-void
-xfs_trans_ijoin_ref(
- struct xfs_trans *tp,
- struct xfs_inode *ip,
- uint lock_flags)
-{
- xfs_trans_ijoin(tp, ip);
- IHOLD(ip);
- ip->i_itemp->ili_lock_flags = lock_flags;
-}
-
-/*
* Transactional inode timestamp update. Requires the inode to be locked and
* joined to the transaction supplied. Relies on the transaction subsystem to
* track dirty state and update/writeback the inode accordingly.
diff --git a/fs/xfs/xfs_trans_priv.h b/fs/xfs/xfs_trans_priv.h
index 22750b5..44820b9 100644
--- a/fs/xfs/xfs_trans_priv.h
+++ b/fs/xfs/xfs_trans_priv.h
@@ -70,6 +70,7 @@
struct list_head xa_cursors;
spinlock_t xa_lock;
xfs_lsn_t xa_last_pushed_lsn;
+ int xa_log_flush;
};
/*
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 51fc429..4ecf2a5 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -72,8 +72,8 @@
xfs_buf_t *bp;
int error = 0;
- error = xfs_bmapi(NULL, ip, 0, XFS_B_TO_FSB(mp, pathlen), 0, NULL, 0,
- mval, &nmaps, NULL);
+ error = xfs_bmapi_read(ip, 0, XFS_B_TO_FSB(mp, pathlen), mval, &nmaps,
+ 0);
if (error)
goto out;
@@ -87,8 +87,7 @@
return XFS_ERROR(ENOMEM);
error = bp->b_error;
if (error) {
- xfs_ioerror_alert("xfs_readlink",
- ip->i_mount, bp, XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp, __func__);
xfs_buf_relse(bp);
goto out;
}
@@ -178,8 +177,7 @@
nimaps = 1;
xfs_ilock(ip, XFS_ILOCK_SHARED);
- error = xfs_bmapi(NULL, ip, end_fsb, map_len, 0,
- NULL, 0, &imap, &nimaps, NULL);
+ error = xfs_bmapi_read(ip, end_fsb, map_len, &imap, &nimaps, 0);
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (!error && (nimaps != 0) &&
@@ -220,7 +218,7 @@
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
error = xfs_itruncate_data(&tp, ip, ip->i_size);
if (error) {
@@ -289,7 +287,7 @@
xfs_ilock(ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
size = (int)ip->i_d.di_size;
ip->i_d.di_size = 0;
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
/*
* Find the block(s) so we can inval and unmap them.
@@ -297,9 +295,9 @@
done = 0;
xfs_bmap_init(&free_list, &first_block);
nmaps = ARRAY_SIZE(mval);
- if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size),
- XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps,
- &free_list)))
+ error = xfs_bmapi_read(ip, 0, XFS_B_TO_FSB(mp, size),
+ mval, &nmaps, 0);
+ if (error)
goto error0;
/*
* Invalidate the block(s).
@@ -308,6 +306,10 @@
bp = xfs_trans_get_buf(tp, mp->m_ddev_targp,
XFS_FSB_TO_DADDR(mp, mval[i].br_startblock),
XFS_FSB_TO_BB(mp, mval[i].br_blockcount), 0);
+ if (!bp) {
+ error = ENOMEM;
+ goto error1;
+ }
xfs_trans_binval(tp, bp);
}
/*
@@ -333,7 +335,7 @@
* Mark it dirty so it will be logged and moved forward in the log as
* part of every commit.
*/
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
/*
* Get a new, empty transaction to return to our caller.
@@ -466,7 +468,7 @@
goto error_cancel;
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
xfs_idestroy_fork(ip, XFS_ATTR_FORK);
ASSERT(ip->i_d.di_anextents == 0);
@@ -647,8 +649,6 @@
if (truncate) {
xfs_ilock(ip, XFS_IOLOCK_EXCL);
- xfs_ioend_wait(ip);
-
error = xfs_trans_reserve(tp, 0,
XFS_ITRUNCATE_LOG_RES(mp),
0, XFS_TRANS_PERM_LOG_RES,
@@ -662,7 +662,7 @@
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
error = xfs_itruncate_data(&tp, ip, 0);
if (error) {
@@ -686,7 +686,7 @@
return VN_INACTIVE_CACHE;
}
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
} else {
error = xfs_trans_reserve(tp, 0,
XFS_IFREE_LOG_RES(mp),
@@ -699,7 +699,7 @@
}
xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
}
/*
@@ -939,7 +939,7 @@
* the transaction cancel unlocking dp so don't do it explicitly in the
* error path.
*/
- xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
unlock_dp_on_error = B_FALSE;
error = xfs_dir_createname(tp, dp, name, ip->i_ino,
@@ -1260,8 +1260,8 @@
xfs_lock_two_inodes(dp, ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
/*
* If we're removing a directory perform some additional validation.
@@ -1406,8 +1406,8 @@
xfs_lock_two_inodes(sip, tdp, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, sip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, tdp, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, sip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, tdp, XFS_ILOCK_EXCL);
/*
* If the source has too many links, we can't make any more to it.
@@ -1601,7 +1601,7 @@
* transaction cancel unlocking dp so don't do it explicitly in the
* error path.
*/
- xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
unlock_dp_on_error = B_FALSE;
/*
@@ -1632,10 +1632,9 @@
first_fsb = 0;
nmaps = SYMLINK_MAPS;
- error = xfs_bmapi(tp, ip, first_fsb, fs_blocks,
- XFS_BMAPI_WRITE | XFS_BMAPI_METADATA,
- &first_block, resblks, mval, &nmaps,
- &free_list);
+ error = xfs_bmapi_write(tp, ip, first_fsb, fs_blocks,
+ XFS_BMAPI_METADATA, &first_block, resblks,
+ mval, &nmaps, &free_list);
if (error)
goto error2;
@@ -1650,7 +1649,10 @@
byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount);
bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, d,
BTOBB(byte_cnt), 0);
- ASSERT(!xfs_buf_geterror(bp));
+ if (!bp) {
+ error = ENOMEM;
+ goto error2;
+ }
if (pathlen < byte_cnt) {
byte_cnt = pathlen;
}
@@ -1732,7 +1734,7 @@
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
ip->i_d.di_dmevmask = evmask;
ip->i_d.di_dmstate = state;
@@ -1778,7 +1780,6 @@
xfs_fileoff_t startoffset_fsb;
xfs_fsblock_t firstfsb;
int nimaps;
- int bmapi_flag;
int quota_flag;
int rt;
xfs_trans_t *tp;
@@ -1806,7 +1807,6 @@
count = len;
imapp = &imaps[0];
nimaps = 1;
- bmapi_flag = XFS_BMAPI_WRITE | alloc_type;
startoffset_fsb = XFS_B_TO_FSBT(mp, offset);
allocatesize_fsb = XFS_B_TO_FSB(mp, count);
@@ -1877,16 +1877,12 @@
if (error)
goto error1;
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
- /*
- * Issue the xfs_bmapi() call to allocate the blocks
- */
xfs_bmap_init(&free_list, &firstfsb);
- error = xfs_bmapi(tp, ip, startoffset_fsb,
- allocatesize_fsb, bmapi_flag,
- &firstfsb, 0, imapp, &nimaps,
- &free_list);
+ error = xfs_bmapi_write(tp, ip, startoffset_fsb,
+ allocatesize_fsb, alloc_type, &firstfsb,
+ 0, imapp, &nimaps, &free_list);
if (error) {
goto error0;
}
@@ -1976,8 +1972,7 @@
for (offset = startoff; offset <= endoff; offset = lastoffset + 1) {
offset_fsb = XFS_B_TO_FSBT(mp, offset);
nimap = 1;
- error = xfs_bmapi(NULL, ip, offset_fsb, 1, 0,
- NULL, 0, &imap, &nimap, NULL);
+ error = xfs_bmapi_read(ip, offset_fsb, 1, &imap, &nimap, 0);
if (error || nimap < 1)
break;
ASSERT(imap.br_blockcount >= 1);
@@ -1997,8 +1992,8 @@
xfsbdstrat(mp, bp);
error = xfs_buf_iowait(bp);
if (error) {
- xfs_ioerror_alert("xfs_zero_remaining_bytes(read)",
- mp, bp, XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp,
+ "xfs_zero_remaining_bytes(read)");
break;
}
memset(bp->b_addr +
@@ -2010,8 +2005,8 @@
xfsbdstrat(mp, bp);
error = xfs_buf_iowait(bp);
if (error) {
- xfs_ioerror_alert("xfs_zero_remaining_bytes(write)",
- mp, bp, XFS_BUF_ADDR(bp));
+ xfs_buf_ioerror_alert(bp,
+ "xfs_zero_remaining_bytes(write)");
break;
}
}
@@ -2076,7 +2071,7 @@
if (need_iolock) {
xfs_ilock(ip, XFS_IOLOCK_EXCL);
/* wait for the completion of any pending DIOs */
- xfs_ioend_wait(ip);
+ inode_dio_wait(VFS_I(ip));
}
rounding = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
@@ -2096,8 +2091,8 @@
*/
if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
nimap = 1;
- error = xfs_bmapi(NULL, ip, startoffset_fsb,
- 1, 0, NULL, 0, &imap, &nimap, NULL);
+ error = xfs_bmapi_read(ip, startoffset_fsb, 1,
+ &imap, &nimap, 0);
if (error)
goto out_unlock_iolock;
ASSERT(nimap == 0 || nimap == 1);
@@ -2111,8 +2106,8 @@
startoffset_fsb += mp->m_sb.sb_rextsize - mod;
}
nimap = 1;
- error = xfs_bmapi(NULL, ip, endoffset_fsb - 1,
- 1, 0, NULL, 0, &imap, &nimap, NULL);
+ error = xfs_bmapi_read(ip, endoffset_fsb - 1, 1,
+ &imap, &nimap, 0);
if (error)
goto out_unlock_iolock;
ASSERT(nimap == 0 || nimap == 1);
@@ -2180,7 +2175,7 @@
if (error)
goto error1;
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, 0);
/*
* issue the bunmapi() call to free the blocks
@@ -2353,8 +2348,7 @@
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
-
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
if ((attr_flags & XFS_ATTR_DMI) == 0) {
ip->i_d.di_mode &= ~S_ISUID;
@@ -2379,10 +2373,5 @@
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
if (attr_flags & XFS_ATTR_SYNC)
xfs_trans_set_sync(tp);
-
- error = xfs_trans_commit(tp, 0);
-
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
-
- return error;
+ return xfs_trans_commit(tp, 0);
}
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 4543b6f..83062ed 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -189,6 +189,8 @@
/*
* Threads and Scheduling
*/
+extern struct workqueue_struct *kacpi_hotplug_wq;
+
acpi_thread_id acpi_os_get_thread_id(void);
acpi_status
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index dfb0ec6..84458b0 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -61,11 +61,12 @@
*/
#ifndef __WARN_TAINT
#ifndef __ASSEMBLY__
-extern void warn_slowpath_fmt(const char *file, const int line,
- const char *fmt, ...) __attribute__((format(printf, 3, 4)));
-extern void warn_slowpath_fmt_taint(const char *file, const int line,
- unsigned taint, const char *fmt, ...)
- __attribute__((format(printf, 4, 5)));
+extern __printf(3, 4)
+void warn_slowpath_fmt(const char *file, const int line,
+ const char *fmt, ...);
+extern __printf(4, 5)
+void warn_slowpath_fmt_taint(const char *file, const int line, unsigned taint,
+ const char *fmt, ...);
extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
#endif
diff --git a/include/asm-generic/checksum.h b/include/asm-generic/checksum.h
index 4647c76..c084767 100644
--- a/include/asm-generic/checksum.h
+++ b/include/asm-generic/checksum.h
@@ -33,8 +33,10 @@
extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
int len, __wsum sum, int *csum_err);
+#ifndef csum_partial_copy_nocheck
#define csum_partial_copy_nocheck(src, dst, len, sum) \
csum_partial_copy((src), (dst), (len), (sum))
+#endif
/*
* This is a version of ip_compute_csum() optimized for IP headers,
@@ -63,12 +65,14 @@
unsigned short proto, __wsum sum);
#endif
+#ifndef csum_tcpudp_magic
static inline __sum16
csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
+#endif
/*
* this routine is used for miscellaneous IP-like checksums, mainly
diff --git a/include/asm-generic/dma-mapping-common.h b/include/asm-generic/dma-mapping-common.h
index 0c80bb3..9fa3f96 100644
--- a/include/asm-generic/dma-mapping-common.h
+++ b/include/asm-generic/dma-mapping-common.h
@@ -123,7 +123,12 @@
size_t size,
enum dma_data_direction dir)
{
- dma_sync_single_for_cpu(dev, addr + offset, size, dir);
+ const struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops->sync_single_for_cpu)
+ ops->sync_single_for_cpu(dev, addr + offset, size, dir);
+ debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -132,7 +137,12 @@
size_t size,
enum dma_data_direction dir)
{
- dma_sync_single_for_device(dev, addr + offset, size, dir);
+ const struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops->sync_single_for_device)
+ ops->sync_single_for_device(dev, addr + offset, size, dir);
+ debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
}
static inline void
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index d494001..8c86210 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -41,6 +41,7 @@
}
struct device;
+struct gpio;
struct seq_file;
struct module;
struct device_node;
@@ -170,18 +171,6 @@
extern int __gpio_to_irq(unsigned gpio);
-/**
- * struct gpio - a structure describing a GPIO with configuration
- * @gpio: the GPIO number
- * @flags: GPIO configuration as specified by GPIOF_*
- * @label: a literal description string of this GPIO
- */
-struct gpio {
- unsigned gpio;
- unsigned long flags;
- const char *label;
-};
-
extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
extern int gpio_request_array(const struct gpio *array, size_t num);
extern void gpio_free_array(const struct gpio *array, size_t num);
@@ -220,13 +209,13 @@
static inline int gpio_get_value_cansleep(unsigned gpio)
{
might_sleep();
- return gpio_get_value(gpio);
+ return __gpio_get_value(gpio);
}
static inline void gpio_set_value_cansleep(unsigned gpio, int value)
{
might_sleep();
- gpio_set_value(gpio, value);
+ __gpio_set_value(gpio, value);
}
#endif /* !CONFIG_GPIOLIB */
diff --git a/include/asm-generic/page.h b/include/asm-generic/page.h
index 75fec18..351889d1 100644
--- a/include/asm-generic/page.h
+++ b/include/asm-generic/page.h
@@ -79,8 +79,8 @@
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+#define virt_to_page(addr) pfn_to_page(virt_to_pfn(addr))
+#define page_to_virt(page) pfn_to_virt(page_to_pfn(page))
#ifndef page_to_phys
#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
diff --git a/include/asm-generic/rwsem.h b/include/asm-generic/rwsem.h
new file mode 100644
index 0000000..bb1e2cd
--- /dev/null
+++ b/include/asm-generic/rwsem.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_POWERPC_RWSEM_H
+#define _ASM_POWERPC_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * R/W semaphores for PPC using the stuff in lib/rwsem.c.
+ * Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+/*
+ * the semaphore definition
+ */
+#ifdef CONFIG_PPC64
+# define RWSEM_ACTIVE_MASK 0xffffffffL
+#else
+# define RWSEM_ACTIVE_MASK 0x0000ffffL
+#endif
+
+#define RWSEM_UNLOCKED_VALUE 0x00000000L
+#define RWSEM_ACTIVE_BIAS 0x00000001L
+#define RWSEM_WAITING_BIAS (-RWSEM_ACTIVE_MASK-1)
+#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+ if (unlikely(atomic_long_inc_return((atomic_long_t *)&sem->count) <= 0))
+ rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+ long tmp;
+
+ while ((tmp = sem->count) >= 0) {
+ if (tmp == cmpxchg(&sem->count, tmp,
+ tmp + RWSEM_ACTIVE_READ_BIAS)) {
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+ long tmp;
+
+ tmp = atomic_long_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+ (atomic_long_t *)&sem->count);
+ if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+ rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+ __down_write_nested(sem, 0);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+ long tmp;
+
+ tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+ RWSEM_ACTIVE_WRITE_BIAS);
+ return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+ long tmp;
+
+ tmp = atomic_long_dec_return((atomic_long_t *)&sem->count);
+ if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
+ rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+ if (unlikely(atomic_long_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+ (atomic_long_t *)&sem->count) < 0))
+ rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
+{
+ atomic_long_add(delta, (atomic_long_t *)&sem->count);
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+ long tmp;
+
+ tmp = atomic_long_add_return(-RWSEM_WAITING_BIAS,
+ (atomic_long_t *)&sem->count);
+ if (tmp < 0)
+ rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
+{
+ return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_RWSEM_H */
diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h
index 59c3e5b..ecc721d 100644
--- a/include/crypto/algapi.h
+++ b/include/crypto/algapi.h
@@ -15,6 +15,7 @@
#include <linux/crypto.h>
#include <linux/list.h>
#include <linux/kernel.h>
+#include <linux/skbuff.h>
struct module;
struct rtattr;
@@ -26,6 +27,7 @@
int (*init)(struct crypto_tfm *tfm, u32 type, u32 mask);
int (*init_tfm)(struct crypto_tfm *tfm);
void (*show)(struct seq_file *m, struct crypto_alg *alg);
+ int (*report)(struct sk_buff *skb, struct crypto_alg *alg);
struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask);
unsigned int type;
diff --git a/include/crypto/blowfish.h b/include/crypto/blowfish.h
new file mode 100644
index 0000000..1450d4a
--- /dev/null
+++ b/include/crypto/blowfish.h
@@ -0,0 +1,23 @@
+/*
+ * Common values for blowfish algorithms
+ */
+
+#ifndef _CRYPTO_BLOWFISH_H
+#define _CRYPTO_BLOWFISH_H
+
+#include <linux/types.h>
+#include <linux/crypto.h>
+
+#define BF_BLOCK_SIZE 8
+#define BF_MIN_KEY_SIZE 4
+#define BF_MAX_KEY_SIZE 56
+
+struct bf_ctx {
+ u32 p[18];
+ u32 s[1024];
+};
+
+int blowfish_setkey(struct crypto_tfm *tfm, const u8 *key,
+ unsigned int key_len);
+
+#endif
diff --git a/include/crypto/sha.h b/include/crypto/sha.h
index 069e85b..c6c9c1f 100644
--- a/include/crypto/sha.h
+++ b/include/crypto/sha.h
@@ -82,4 +82,9 @@
u8 buf[SHA512_BLOCK_SIZE];
};
+struct shash_desc;
+
+extern int crypto_sha1_update(struct shash_desc *desc, const u8 *data,
+ unsigned int len);
+
#endif
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 9b7c2bb..cf3b446 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -122,12 +122,12 @@
* using the DRM_DEBUG_KMS and DRM_DEBUG.
*/
-extern __attribute__((format (printf, 4, 5)))
+extern __printf(4, 5)
void drm_ut_debug_printk(unsigned int request_level,
- const char *prefix,
- const char *function_name,
- const char *format, ...);
-extern __attribute__((format (printf, 2, 3)))
+ const char *prefix,
+ const char *function_name,
+ const char *format, ...);
+extern __printf(2, 3)
int drm_err(const char *func, const char *format, ...);
/***********************************************************************/
@@ -1624,6 +1624,9 @@
drm_gem_object_unreference_unlocked(obj);
}
+void drm_gem_free_mmap_offset(struct drm_gem_object *obj);
+int drm_gem_create_mmap_offset(struct drm_gem_object *obj);
+
struct drm_gem_object *drm_gem_object_lookup(struct drm_device *dev,
struct drm_file *filp,
u32 handle);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 44335e5..8020798 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -466,6 +466,8 @@
/* DACs should rarely do this without a lot of testing */
#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
+#define MAX_ELD_BYTES 128
+
/**
* drm_connector - central DRM connector control structure
* @crtc: CRTC this connector is currently connected to, NULL if none
@@ -523,6 +525,13 @@
uint32_t force_encoder_id;
struct drm_encoder *encoder; /* currently active encoder */
+ /* EDID bits */
+ uint8_t eld[MAX_ELD_BYTES];
+ bool dvi_dual;
+ int max_tmds_clock; /* in MHz */
+ bool latency_present[2];
+ int video_latency[2]; /* [0]: progressive, [1]: interlaced */
+ int audio_latency[2];
int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
};
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 91567bb..0d2f727e 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -74,6 +74,20 @@
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e
+#define DP_PSR_SUPPORT 0x070
+# define DP_PSR_IS_SUPPORTED 1
+#define DP_PSR_CAPS 0x071
+# define DP_PSR_NO_TRAIN_ON_EXIT 1
+# define DP_PSR_SETUP_TIME_330 (0 << 1)
+# define DP_PSR_SETUP_TIME_275 (1 << 1)
+# define DP_PSR_SETUP_TIME_220 (2 << 1)
+# define DP_PSR_SETUP_TIME_165 (3 << 1)
+# define DP_PSR_SETUP_TIME_110 (4 << 1)
+# define DP_PSR_SETUP_TIME_55 (5 << 1)
+# define DP_PSR_SETUP_TIME_0 (6 << 1)
+# define DP_PSR_SETUP_TIME_MASK (7 << 1)
+# define DP_PSR_SETUP_TIME_SHIFT 1
+
/* link configuration */
#define DP_LINK_BW_SET 0x100
# define DP_LINK_BW_1_62 0x06
@@ -133,6 +147,18 @@
#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
# define DP_SET_ANSI_8B10B (1 << 0)
+#define DP_PSR_EN_CFG 0x170
+# define DP_PSR_ENABLE (1 << 0)
+# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1)
+# define DP_PSR_CRC_VERIFICATION (1 << 2)
+# define DP_PSR_FRAME_CAPTURE (1 << 3)
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201
+# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0)
+# define DP_AUTOMATED_TEST_REQUEST (1 << 1)
+# define DP_CP_IRQ (1 << 2)
+# define DP_SINK_SPECIFIC_IRQ (1 << 6)
+
#define DP_LANE0_1_STATUS 0x202
#define DP_LANE2_3_STATUS 0x203
# define DP_LANE_CR_DONE (1 << 0)
@@ -165,10 +191,45 @@
# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
+#define DP_TEST_REQUEST 0x218
+# define DP_TEST_LINK_TRAINING (1 << 0)
+# define DP_TEST_LINK_PATTERN (1 << 1)
+# define DP_TEST_LINK_EDID_READ (1 << 2)
+# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */
+
+#define DP_TEST_LINK_RATE 0x219
+# define DP_LINK_RATE_162 (0x6)
+# define DP_LINK_RATE_27 (0xa)
+
+#define DP_TEST_LANE_COUNT 0x220
+
+#define DP_TEST_PATTERN 0x221
+
+#define DP_TEST_RESPONSE 0x260
+# define DP_TEST_ACK (1 << 0)
+# define DP_TEST_NAK (1 << 1)
+# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2)
+
#define DP_SET_POWER 0x600
# define DP_SET_POWER_D0 0x1
# define DP_SET_POWER_D3 0x2
+#define DP_PSR_ERROR_STATUS 0x2006
+# define DP_PSR_LINK_CRC_ERROR (1 << 0)
+# define DP_PSR_RFB_STORAGE_ERROR (1 << 1)
+
+#define DP_PSR_ESI 0x2007
+# define DP_PSR_CAPS_CHANGE (1 << 0)
+
+#define DP_PSR_STATUS 0x2008
+# define DP_PSR_SINK_INACTIVE 0
+# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1
+# define DP_PSR_SINK_ACTIVE_RFB 2
+# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3
+# define DP_PSR_SINK_ACTIVE_RESYNC 4
+# define DP_PSR_SINK_INTERNAL_ERROR 7
+# define DP_PSR_SINK_STATE_MASK 0x07
+
#define MODE_I2C_START 1
#define MODE_I2C_WRITE 2
#define MODE_I2C_READ 4
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index eacb415..74ce916 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -230,4 +230,13 @@
#define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8))
+struct drm_encoder;
+struct drm_connector;
+struct drm_display_mode;
+void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid);
+int drm_av_sync_delay(struct drm_connector *connector,
+ struct drm_display_mode *mode);
+struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
+ struct drm_display_mode *mode);
+
#endif /* __DRM_EDID_H__ */
diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h
new file mode 100644
index 0000000..874c4d2
--- /dev/null
+++ b/include/drm/exynos_drm.h
@@ -0,0 +1,104 @@
+/* exynos_drm.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ * Inki Dae <inki.dae@samsung.com>
+ * Joonyoung Shim <jy0922.shim@samsung.com>
+ * Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_H_
+#define _EXYNOS_DRM_H_
+
+/**
+ * User-desired buffer creation information structure.
+ *
+ * @size: requested size for the object.
+ * - this size value would be page-aligned internally.
+ * @flags: user request for setting memory type or cache attributes.
+ * @handle: returned handle for the object.
+ */
+struct drm_exynos_gem_create {
+ unsigned int size;
+ unsigned int flags;
+ unsigned int handle;
+};
+
+/**
+ * A structure for getting buffer offset.
+ *
+ * @handle: a pointer to gem object created.
+ * @pad: just padding to be 64-bit aligned.
+ * @offset: relatived offset value of the memory region allocated.
+ * - this value should be set by user.
+ */
+struct drm_exynos_gem_map_off {
+ unsigned int handle;
+ unsigned int pad;
+ uint64_t offset;
+};
+
+/**
+ * A structure for mapping buffer.
+ *
+ * @handle: a handle to gem object created.
+ * @size: memory size to be mapped.
+ * @mapped: having user virtual address mmaped.
+ * - this variable would be filled by exynos gem module
+ * of kernel side with user virtual address which is allocated
+ * by do_mmap().
+ */
+struct drm_exynos_gem_mmap {
+ unsigned int handle;
+ unsigned int size;
+ uint64_t mapped;
+};
+
+#define DRM_EXYNOS_GEM_CREATE 0x00
+#define DRM_EXYNOS_GEM_MAP_OFFSET 0x01
+#define DRM_EXYNOS_GEM_MMAP 0x02
+
+#define DRM_IOCTL_EXYNOS_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + \
+ DRM_EXYNOS_GEM_CREATE, struct drm_exynos_gem_create)
+
+#define DRM_IOCTL_EXYNOS_GEM_MAP_OFFSET DRM_IOWR(DRM_COMMAND_BASE + \
+ DRM_EXYNOS_GEM_MAP_OFFSET, struct drm_exynos_gem_map_off)
+
+#define DRM_IOCTL_EXYNOS_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + \
+ DRM_EXYNOS_GEM_MMAP, struct drm_exynos_gem_mmap)
+
+/**
+ * Platform Specific Structure for DRM based FIMD.
+ *
+ * @timing: default video mode for initializing
+ * @default_win: default window layer number to be used for UI.
+ * @bpp: default bit per pixel.
+ */
+struct exynos_drm_fimd_pdata {
+ struct fb_videomode timing;
+ u32 vidcon0;
+ u32 vidcon1;
+ unsigned int default_win;
+ unsigned int bpp;
+};
+
+#endif
diff --git a/include/drm/intel-gtt.h b/include/drm/intel-gtt.h
index 9e343c0..b174620 100644
--- a/include/drm/intel-gtt.h
+++ b/include/drm/intel-gtt.h
@@ -13,6 +13,8 @@
unsigned int gtt_mappable_entries;
/* Whether i915 needs to use the dmar apis or not. */
unsigned int needs_dmar : 1;
+ /* Whether we idle the gpu before mapping/unmapping */
+ unsigned int do_idle_maps : 1;
} *intel_gtt_get(void);
void intel_gtt_chipset_flush(void);
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
index 5c36432d..cd7cd81 100644
--- a/include/drm/vmwgfx_drm.h
+++ b/include/drm/vmwgfx_drm.h
@@ -31,7 +31,6 @@
#define DRM_VMW_MAX_SURFACE_FACES 6
#define DRM_VMW_MAX_MIP_LEVELS 24
-#define DRM_VMW_EXT_NAME_LEN 128
#define DRM_VMW_GET_PARAM 0
#define DRM_VMW_ALLOC_DMABUF 1
@@ -48,10 +47,13 @@
#define DRM_VMW_UNREF_SURFACE 10
#define DRM_VMW_REF_SURFACE 11
#define DRM_VMW_EXECBUF 12
-#define DRM_VMW_FIFO_DEBUG 13
+#define DRM_VMW_GET_3D_CAP 13
#define DRM_VMW_FENCE_WAIT 14
-/* guarded by minor version >= 2 */
-#define DRM_VMW_UPDATE_LAYOUT 15
+#define DRM_VMW_FENCE_SIGNALED 15
+#define DRM_VMW_FENCE_UNREF 16
+#define DRM_VMW_FENCE_EVENT 17
+#define DRM_VMW_PRESENT 18
+#define DRM_VMW_PRESENT_READBACK 19
/*************************************************************************/
@@ -69,10 +71,10 @@
#define DRM_VMW_PARAM_NUM_STREAMS 0
#define DRM_VMW_PARAM_NUM_FREE_STREAMS 1
#define DRM_VMW_PARAM_3D 2
-#define DRM_VMW_PARAM_FIFO_OFFSET 3
-#define DRM_VMW_PARAM_HW_CAPS 4
-#define DRM_VMW_PARAM_FIFO_CAPS 5
-#define DRM_VMW_PARAM_MAX_FB_SIZE 6
+#define DRM_VMW_PARAM_HW_CAPS 3
+#define DRM_VMW_PARAM_FIFO_CAPS 4
+#define DRM_VMW_PARAM_MAX_FB_SIZE 5
+#define DRM_VMW_PARAM_FIFO_HW_VERSION 6
/**
* struct drm_vmw_getparam_arg
@@ -91,49 +93,6 @@
/*************************************************************************/
/**
- * DRM_VMW_EXTENSION - Query device extensions.
- */
-
-/**
- * struct drm_vmw_extension_rep
- *
- * @exists: The queried extension exists.
- * @driver_ioctl_offset: Ioctl number of the first ioctl in the extension.
- * @driver_sarea_offset: Offset to any space in the DRI SAREA
- * used by the extension.
- * @major: Major version number of the extension.
- * @minor: Minor version number of the extension.
- * @pl: Patch level version number of the extension.
- *
- * Output argument to the DRM_VMW_EXTENSION Ioctl.
- */
-
-struct drm_vmw_extension_rep {
- int32_t exists;
- uint32_t driver_ioctl_offset;
- uint32_t driver_sarea_offset;
- uint32_t major;
- uint32_t minor;
- uint32_t pl;
- uint32_t pad64;
-};
-
-/**
- * union drm_vmw_extension_arg
- *
- * @extension - Ascii name of the extension to be queried. //In
- * @rep - Reply as defined above. //Out
- *
- * Argument to the DRM_VMW_EXTENSION Ioctl.
- */
-
-union drm_vmw_extension_arg {
- char extension[DRM_VMW_EXT_NAME_LEN];
- struct drm_vmw_extension_rep rep;
-};
-
-/*************************************************************************/
-/**
* DRM_VMW_CREATE_CONTEXT - Create a host context.
*
* Allocates a device unique context id, and queues a create context command
@@ -292,7 +251,7 @@
* DRM_VMW_EXECBUF
*
* Submit a command buffer for execution on the host, and return a
- * fence sequence that when signaled, indicates that the command buffer has
+ * fence seqno that when signaled, indicates that the command buffer has
* executed.
*/
@@ -314,21 +273,30 @@
* Argument to the DRM_VMW_EXECBUF Ioctl.
*/
-#define DRM_VMW_EXECBUF_VERSION 0
+#define DRM_VMW_EXECBUF_VERSION 1
struct drm_vmw_execbuf_arg {
uint64_t commands;
uint32_t command_size;
uint32_t throttle_us;
uint64_t fence_rep;
- uint32_t version;
- uint32_t flags;
+ uint32_t version;
+ uint32_t flags;
};
/**
* struct drm_vmw_fence_rep
*
- * @fence_seq: Fence sequence associated with a command submission.
+ * @handle: Fence object handle for fence associated with a command submission.
+ * @mask: Fence flags relevant for this fence object.
+ * @seqno: Fence sequence number in fifo. A fence object with a lower
+ * seqno will signal the EXEC flag before a fence object with a higher
+ * seqno. This can be used by user-space to avoid kernel calls to determine
+ * whether a fence has signaled the EXEC flag. Note that @seqno will
+ * wrap at 32-bit.
+ * @passed_seqno: The highest seqno number processed by the hardware
+ * so far. This can be used to mark user-space fence objects as signaled, and
+ * to determine whether a fence seqno might be stale.
* @error: This member should've been set to -EFAULT on submission.
* The following actions should be take on completion:
* error == -EFAULT: Fence communication failed. The host is synchronized.
@@ -342,9 +310,12 @@
*/
struct drm_vmw_fence_rep {
- uint64_t fence_seq;
- int32_t error;
+ uint32_t handle;
+ uint32_t mask;
+ uint32_t seqno;
+ uint32_t passed_seqno;
uint32_t pad64;
+ int32_t error;
};
/*************************************************************************/
@@ -435,39 +406,6 @@
/*************************************************************************/
/**
- * DRM_VMW_FIFO_DEBUG - Get last FIFO submission.
- *
- * This IOCTL copies the last FIFO submission directly out of the FIFO buffer.
- */
-
-/**
- * struct drm_vmw_fifo_debug_arg
- *
- * @debug_buffer: User space address of a debug_buffer cast to an uint64_t //In
- * @debug_buffer_size: Size in bytes of debug buffer //In
- * @used_size: Number of bytes copied to the buffer // Out
- * @did_not_fit: Boolean indicating that the fifo contents did not fit. //Out
- *
- * Argument to the DRM_VMW_FIFO_DEBUG Ioctl.
- */
-
-struct drm_vmw_fifo_debug_arg {
- uint64_t debug_buffer;
- uint32_t debug_buffer_size;
- uint32_t used_size;
- int32_t did_not_fit;
- uint32_t pad64;
-};
-
-struct drm_vmw_fence_wait_arg {
- uint64_t sequence;
- uint64_t kernel_cookie;
- int32_t cookie_valid;
- int32_t pad64;
-};
-
-/*************************************************************************/
-/**
* DRM_VMW_CONTROL_STREAM - Control overlays, aka streams.
*
* This IOCTL controls the overlay units of the svga device.
@@ -590,6 +528,30 @@
/*************************************************************************/
/**
+ * DRM_VMW_GET_3D_CAP
+ *
+ * Read 3D capabilities from the FIFO
+ *
+ */
+
+/**
+ * struct drm_vmw_get_3d_cap_arg
+ *
+ * @buffer: Pointer to a buffer for capability data, cast to an uint64_t
+ * @size: Max size to copy
+ *
+ * Input argument to the DRM_VMW_GET_3D_CAP_IOCTL
+ * ioctls.
+ */
+
+struct drm_vmw_get_3d_cap_arg {
+ uint64_t buffer;
+ uint32_t max_size;
+ uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
* DRM_VMW_UPDATE_LAYOUT - Update layout
*
* Updates the preferred modes and connection status for connectors. The
@@ -612,4 +574,218 @@
uint64_t rects;
};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_WAIT
+ *
+ * Waits for a fence object to signal. The wait is interruptible, so that
+ * signals may be delivered during the interrupt. The wait may timeout,
+ * in which case the calls returns -EBUSY. If the wait is restarted,
+ * that is restarting without resetting @cookie_valid to zero,
+ * the timeout is computed from the first call.
+ *
+ * The flags argument to the DRM_VMW_FENCE_WAIT ioctl indicates what to wait
+ * on:
+ * DRM_VMW_FENCE_FLAG_EXEC: All commands ahead of the fence in the command
+ * stream
+ * have executed.
+ * DRM_VMW_FENCE_FLAG_QUERY: All query results resulting from query finish
+ * commands
+ * in the buffer given to the EXECBUF ioctl returning the fence object handle
+ * are available to user-space.
+ *
+ * DRM_VMW_WAIT_OPTION_UNREF: If this wait option is given, and the
+ * fenc wait ioctl returns 0, the fence object has been unreferenced after
+ * the wait.
+ */
+
+#define DRM_VMW_FENCE_FLAG_EXEC (1 << 0)
+#define DRM_VMW_FENCE_FLAG_QUERY (1 << 1)
+
+#define DRM_VMW_WAIT_OPTION_UNREF (1 << 0)
+
+/**
+ * struct drm_vmw_fence_wait_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ * @cookie_valid: Must be reset to 0 on first call. Left alone on restart.
+ * @kernel_cookie: Set to 0 on first call. Left alone on restart.
+ * @timeout_us: Wait timeout in microseconds. 0 for indefinite timeout.
+ * @lazy: Set to 1 if timing is not critical. Allow more than a kernel tick
+ * before returning.
+ * @flags: Fence flags to wait on.
+ * @wait_options: Options that control the behaviour of the wait ioctl.
+ *
+ * Input argument to the DRM_VMW_FENCE_WAIT ioctl.
+ */
+
+struct drm_vmw_fence_wait_arg {
+ uint32_t handle;
+ int32_t cookie_valid;
+ uint64_t kernel_cookie;
+ uint64_t timeout_us;
+ int32_t lazy;
+ int32_t flags;
+ int32_t wait_options;
+ int32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_SIGNALED
+ *
+ * Checks if a fence object is signaled..
+ */
+
+/**
+ * struct drm_vmw_fence_signaled_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ * @flags: Fence object flags input to DRM_VMW_FENCE_SIGNALED ioctl
+ * @signaled: Out: Flags signaled.
+ * @sequence: Out: Highest sequence passed so far. Can be used to signal the
+ * EXEC flag of user-space fence objects.
+ *
+ * Input/Output argument to the DRM_VMW_FENCE_SIGNALED and DRM_VMW_FENCE_UNREF
+ * ioctls.
+ */
+
+struct drm_vmw_fence_signaled_arg {
+ uint32_t handle;
+ uint32_t flags;
+ int32_t signaled;
+ uint32_t passed_seqno;
+ uint32_t signaled_flags;
+ uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_UNREF
+ *
+ * Unreferences a fence object, and causes it to be destroyed if there are no
+ * other references to it.
+ *
+ */
+
+/**
+ * struct drm_vmw_fence_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ *
+ * Input/Output argument to the DRM_VMW_FENCE_UNREF ioctl..
+ */
+
+struct drm_vmw_fence_arg {
+ uint32_t handle;
+ uint32_t pad64;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_EVENT
+ *
+ * Queues an event on a fence to be delivered on the drm character device
+ * when the fence has signaled the DRM_VMW_FENCE_FLAG_EXEC flag.
+ * Optionally the approximate time when the fence signaled is
+ * given by the event.
+ */
+
+/*
+ * The event type
+ */
+#define DRM_VMW_EVENT_FENCE_SIGNALED 0x80000000
+
+struct drm_vmw_event_fence {
+ struct drm_event base;
+ uint64_t user_data;
+ uint32_t tv_sec;
+ uint32_t tv_usec;
+};
+
+/*
+ * Flags that may be given to the command.
+ */
+/* Request fence signaled time on the event. */
+#define DRM_VMW_FE_FLAG_REQ_TIME (1 << 0)
+
+/**
+ * struct drm_vmw_fence_event_arg
+ *
+ * @fence_rep: Pointer to fence_rep structure cast to uint64_t or 0 if
+ * the fence is not supposed to be referenced by user-space.
+ * @user_info: Info to be delivered with the event.
+ * @handle: Attach the event to this fence only.
+ * @flags: A set of flags as defined above.
+ */
+struct drm_vmw_fence_event_arg {
+ uint64_t fence_rep;
+ uint64_t user_data;
+ uint32_t handle;
+ uint32_t flags;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_PRESENT
+ *
+ * Executes an SVGA present on a given fb for a given surface. The surface
+ * is placed on the framebuffer. Cliprects are given relative to the given
+ * point (the point disignated by dest_{x|y}).
+ *
+ */
+
+/**
+ * struct drm_vmw_present_arg
+ * @fb_id: framebuffer id to present / read back from.
+ * @sid: Surface id to present from.
+ * @dest_x: X placement coordinate for surface.
+ * @dest_y: Y placement coordinate for surface.
+ * @clips_ptr: Pointer to an array of clip rects cast to an uint64_t.
+ * @num_clips: Number of cliprects given relative to the framebuffer origin,
+ * in the same coordinate space as the frame buffer.
+ * @pad64: Unused 64-bit padding.
+ *
+ * Input argument to the DRM_VMW_PRESENT ioctl.
+ */
+
+struct drm_vmw_present_arg {
+ uint32_t fb_id;
+ uint32_t sid;
+ int32_t dest_x;
+ int32_t dest_y;
+ uint64_t clips_ptr;
+ uint32_t num_clips;
+ uint32_t pad64;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_PRESENT_READBACK
+ *
+ * Executes an SVGA present readback from a given fb to the dma buffer
+ * currently bound as the fb. If there is no dma buffer bound to the fb,
+ * an error will be returned.
+ *
+ */
+
+/**
+ * struct drm_vmw_present_arg
+ * @fb_id: fb_id to present / read back from.
+ * @num_clips: Number of cliprects.
+ * @clips_ptr: Pointer to an array of clip rects cast to an uint64_t.
+ * @fence_rep: Pointer to a struct drm_vmw_fence_rep, cast to an uint64_t.
+ * If this member is NULL, then the ioctl should not return a fence.
+ */
+
+struct drm_vmw_present_readback_arg {
+ uint32_t fb_id;
+ uint32_t num_clips;
+ uint64_t clips_ptr;
+ uint64_t fence_rep;
+};
#endif
diff --git a/include/linux/aio.h b/include/linux/aio.h
index 2dcb72b..2314ad8 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -117,6 +117,7 @@
struct list_head ki_list; /* the aio core uses this
* for cancellation */
+ struct list_head ki_batch; /* batch allocation */
/*
* If the aio_resfd field of the userspace iocb is not zero,
diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h
index 5ddd9ad..2412af9 100644
--- a/include/linux/amba/pl061.h
+++ b/include/linux/amba/pl061.h
@@ -7,8 +7,7 @@
unsigned gpio_base;
/* number of the first IRQ.
- * If the IRQ functionality in not desired this must be set to
- * (unsigned) -1.
+ * If the IRQ functionality in not desired this must be set to NO_IRQ.
*/
unsigned irq_base;
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 3e09b34..4c7a4b2 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -1,7 +1,7 @@
#ifndef __LINUX_ATMEL_MCI_H
#define __LINUX_ATMEL_MCI_H
-#define ATMEL_MCI_MAX_NR_SLOTS 2
+#define ATMCI_MAX_NR_SLOTS 2
/**
* struct mci_slot_pdata - board-specific per-slot configuration
@@ -33,7 +33,7 @@
*/
struct mci_platform_data {
struct mci_dma_data *dma_slave;
- struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS];
+ struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS];
};
#endif /* __LINUX_ATMEL_MCI_H */
diff --git a/include/linux/atmel_pdc.h b/include/linux/atmel_pdc.h
index 5058a31..63499ce 100644
--- a/include/linux/atmel_pdc.h
+++ b/include/linux/atmel_pdc.h
@@ -33,4 +33,6 @@
#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */
+#define ATMEL_PDC_SCND_BUF_OFF 0x10 /* Offset between first and second buffer registers */
+
#endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 0c80061..2f81c6f 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -584,14 +584,13 @@
#ifdef CONFIG_AUDIT
/* These are defined in audit.c */
/* Public API */
-extern void audit_log(struct audit_context *ctx, gfp_t gfp_mask,
- int type, const char *fmt, ...)
- __attribute__((format(printf,4,5)));
+extern __printf(4, 5)
+void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type,
+ const char *fmt, ...);
extern struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type);
-extern void audit_log_format(struct audit_buffer *ab,
- const char *fmt, ...)
- __attribute__((format(printf,2,3)));
+extern __printf(2, 3)
+void audit_log_format(struct audit_buffer *ab, const char *fmt, ...);
extern void audit_log_end(struct audit_buffer *ab);
extern int audit_string_contains_control(const char *string,
size_t len);
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 8e9e4bc..4d1a074 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -170,7 +170,7 @@
extern int do_blk_trace_setup(struct request_queue *q, char *name,
dev_t dev, struct block_device *bdev,
struct blk_user_trace_setup *buts);
-extern __attribute__((format(printf, 2, 3)))
+extern __printf(2, 3)
void __trace_note_message(struct blk_trace *, const char *fmt, ...);
/**
diff --git a/include/linux/bma150.h b/include/linux/bma150.h
new file mode 100644
index 0000000..7911fda
--- /dev/null
+++ b/include/linux/bma150.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2011 Bosch Sensortec GmbH
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BMA150_H_
+#define _BMA150_H_
+
+#define BMA150_DRIVER "bma150"
+
+struct bma150_cfg {
+ bool any_motion_int; /* Set to enable any-motion interrupt */
+ bool hg_int; /* Set to enable high-G interrupt */
+ bool lg_int; /* Set to enable low-G interrupt */
+ unsigned char any_motion_dur; /* Any-motion duration */
+ unsigned char any_motion_thres; /* Any-motion threshold */
+ unsigned char hg_hyst; /* High-G hysterisis */
+ unsigned char hg_dur; /* High-G duration */
+ unsigned char hg_thres; /* High-G threshold */
+ unsigned char lg_hyst; /* Low-G hysterisis */
+ unsigned char lg_dur; /* Low-G duration */
+ unsigned char lg_thres; /* Low-G threshold */
+ unsigned char range; /* BMA0150_RANGE_xxx (in G) */
+ unsigned char bandwidth; /* BMA0150_BW_xxx (in Hz) */
+};
+
+struct bma150_platform_data {
+ struct bma150_cfg cfg;
+ int (*irq_gpio_cfg)(void);
+};
+
+#endif /* _BMA150_H_ */
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index 5637551..95bd850 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -215,7 +215,9 @@
extern int ceph_compare_options(struct ceph_options *new_opt,
struct ceph_client *client);
extern struct ceph_client *ceph_create_client(struct ceph_options *opt,
- void *private);
+ void *private,
+ unsigned supported_features,
+ unsigned required_features);
extern u64 ceph_client_id(struct ceph_client *client);
extern void ceph_destroy_client(struct ceph_client *client);
extern int __ceph_open_session(struct ceph_client *client,
diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
index ca768ae..ffbeb2c 100644
--- a/include/linux/ceph/messenger.h
+++ b/include/linux/ceph/messenger.h
@@ -237,7 +237,8 @@
extern struct ceph_connection *ceph_con_get(struct ceph_connection *con);
extern void ceph_con_put(struct ceph_connection *con);
-extern struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags);
+extern struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags,
+ bool can_fail);
extern void ceph_msg_kfree(struct ceph_msg *m);
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index da7e4bc..1b7f9d5 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -516,7 +516,7 @@
struct list_head sibling;
/* used when use_id == true */
struct idr idr;
- spinlock_t id_lock;
+ rwlock_t id_lock;
/* should be defined only by modular subsystems */
struct module *module;
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1d37f42..7213b52 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -11,6 +11,8 @@
#ifndef __LINUX_CLK_H
#define __LINUX_CLK_H
+#include <linux/kernel.h>
+
struct device;
/*
@@ -41,11 +43,31 @@
struct clk *clk_get(struct device *dev, const char *id);
/**
+ * clk_prepare - prepare a clock source
+ * @clk: clock source
+ *
+ * This prepares the clock source for use.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+int clk_prepare(struct clk *clk);
+#else
+static inline int clk_prepare(struct clk *clk)
+{
+ might_sleep();
+ return 0;
+}
+#endif
+
+/**
* clk_enable - inform the system when the clock source should be running.
* @clk: clock source
*
* If the clock can not be enabled/disabled, this should return success.
*
+ * May be called from atomic contexts.
+ *
* Returns success (0) or negative errno.
*/
int clk_enable(struct clk *clk);
@@ -57,6 +79,8 @@
* Inform the system that a clock source is no longer required by
* a driver and may be shut down.
*
+ * May be called from atomic contexts.
+ *
* Implementation detail: if the clock source is shared between
* multiple drivers, clk_enable() calls must be balanced by the
* same number of clk_disable() calls for the clock source to be
@@ -64,6 +88,25 @@
*/
void clk_disable(struct clk *clk);
+
+/**
+ * clk_unprepare - undo preparation of a clock source
+ * @clk: clock source
+ *
+ * This undoes a previously prepared clock. The caller must balance
+ * the number of prepare and unprepare calls.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+void clk_unprepare(struct clk *clk);
+#else
+static inline void clk_unprepare(struct clk *clk)
+{
+ might_sleep();
+}
+#endif
+
/**
* clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
* This is only valid once the clock source has been enabled.
diff --git a/include/linux/clkdev.h b/include/linux/clkdev.h
index 457bcb0..d9a4fd0 100644
--- a/include/linux/clkdev.h
+++ b/include/linux/clkdev.h
@@ -24,6 +24,13 @@
struct clk *clk;
};
+#define CLKDEV_INIT(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = c, \
+ }
+
struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
const char *dev_fmt, ...);
diff --git a/include/linux/clksrc-dbx500-prcmu.h b/include/linux/clksrc-dbx500-prcmu.h
new file mode 100644
index 0000000..4fb8119
--- /dev/null
+++ b/include/linux/clksrc-dbx500-prcmu.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ *
+ */
+#ifndef __CLKSRC_DBX500_PRCMU_H
+#define __CLKSRC_DBX500_PRCMU_H
+
+#include <linux/init.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_CLKSRC_DBX500_PRCMU
+void __init clksrc_dbx500_prcmu_init(void __iomem *base);
+#else
+static inline void __init clksrc_dbx500_prcmu_init(void __iomem *base) {}
+#endif
+
+#endif
diff --git a/include/linux/compaction.h b/include/linux/compaction.h
index cc9f7a4..bb2bbdb 100644
--- a/include/linux/compaction.h
+++ b/include/linux/compaction.h
@@ -24,8 +24,6 @@
int order, gfp_t gfp_mask, nodemask_t *mask,
bool sync);
extern unsigned long compaction_suitable(struct zone *zone, int order);
-extern unsigned long compact_zone_order(struct zone *zone, int order,
- gfp_t gfp_mask, bool sync);
/* Do not skip compaction more than 64 times */
#define COMPACT_MAX_DEFER_SHIFT 6
@@ -69,12 +67,6 @@
return COMPACT_SKIPPED;
}
-static inline unsigned long compact_zone_order(struct zone *zone, int order,
- gfp_t gfp_mask, bool sync)
-{
- return COMPACT_CONTINUE;
-}
-
static inline void defer_compaction(struct zone *zone)
{
}
diff --git a/include/linux/compat.h b/include/linux/compat.h
index c6e7523..154bf56 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -547,7 +547,8 @@
const struct compat_iovec __user *uvector,
unsigned long nr_segs,
unsigned long fast_segs, struct iovec *fast_pointer,
- struct iovec **ret_pointer);
+ struct iovec **ret_pointer,
+ int check_access);
extern void __user *compat_alloc_user_space(unsigned long len);
diff --git a/include/linux/cpu_pm.h b/include/linux/cpu_pm.h
new file mode 100644
index 0000000..455b233
--- /dev/null
+++ b/include/linux/cpu_pm.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_CPU_PM_H
+#define _LINUX_CPU_PM_H
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+/*
+ * When a CPU goes to a low power state that turns off power to the CPU's
+ * power domain, the contents of some blocks (floating point coprocessors,
+ * interrupt controllers, caches, timers) in the same power domain can
+ * be lost. The cpm_pm notifiers provide a method for platform idle, suspend,
+ * and hotplug implementations to notify the drivers for these blocks that
+ * they may be reset.
+ *
+ * All cpu_pm notifications must be called with interrupts disabled.
+ *
+ * The notifications are split into two classes: CPU notifications and CPU
+ * cluster notifications.
+ *
+ * CPU notifications apply to a single CPU and must be called on the affected
+ * CPU. They are used to save per-cpu context for affected blocks.
+ *
+ * CPU cluster notifications apply to all CPUs in a single power domain. They
+ * are used to save any global context for affected blocks, and must be called
+ * after all the CPUs in the power domain have been notified of the low power
+ * state.
+ */
+
+/*
+ * Event codes passed as unsigned long val to notifier calls
+ */
+enum cpu_pm_event {
+ /* A single cpu is entering a low power state */
+ CPU_PM_ENTER,
+
+ /* A single cpu failed to enter a low power state */
+ CPU_PM_ENTER_FAILED,
+
+ /* A single cpu is exiting a low power state */
+ CPU_PM_EXIT,
+
+ /* A cpu power domain is entering a low power state */
+ CPU_CLUSTER_PM_ENTER,
+
+ /* A cpu power domain failed to enter a low power state */
+ CPU_CLUSTER_PM_ENTER_FAILED,
+
+ /* A cpu power domain is exiting a low power state */
+ CPU_CLUSTER_PM_EXIT,
+};
+
+#ifdef CONFIG_CPU_PM
+int cpu_pm_register_notifier(struct notifier_block *nb);
+int cpu_pm_unregister_notifier(struct notifier_block *nb);
+int cpu_pm_enter(void);
+int cpu_pm_exit(void);
+int cpu_cluster_pm_enter(void);
+int cpu_cluster_pm_exit(void);
+
+#else
+
+static inline int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_pm_exit(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_exit(void)
+{
+ return 0;
+}
+#endif
+#endif
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 7405407..5c4abce 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -10,6 +10,7 @@
#define ELFCORE_ADDR_ERR (-2ULL)
extern unsigned long long elfcorehdr_addr;
+extern unsigned long long elfcorehdr_size;
extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
unsigned long, int);
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index e5e468e..de9adec 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -72,6 +72,11 @@
#define CRYPTO_ALG_TESTED 0x00000400
/*
+ * Set if the algorithm is an instance that is build from templates.
+ */
+#define CRYPTO_ALG_INSTANCE 0x00000800
+
+/*
* Transform masks and values (for crt_flags).
*/
#define CRYPTO_TFM_REQ_MASK 0x000fff00
diff --git a/include/linux/cryptouser.h b/include/linux/cryptouser.h
new file mode 100644
index 0000000..532fb58
--- /dev/null
+++ b/include/linux/cryptouser.h
@@ -0,0 +1,102 @@
+/*
+ * Crypto user configuration API.
+ *
+ * Copyright (C) 2011 secunet Security Networks AG
+ * Copyright (C) 2011 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* Netlink configuration messages. */
+enum {
+ CRYPTO_MSG_BASE = 0x10,
+ CRYPTO_MSG_NEWALG = 0x10,
+ CRYPTO_MSG_DELALG,
+ CRYPTO_MSG_UPDATEALG,
+ CRYPTO_MSG_GETALG,
+ __CRYPTO_MSG_MAX
+};
+#define CRYPTO_MSG_MAX (__CRYPTO_MSG_MAX - 1)
+#define CRYPTO_NR_MSGTYPES (CRYPTO_MSG_MAX + 1 - CRYPTO_MSG_BASE)
+
+#define CRYPTO_MAX_NAME CRYPTO_MAX_ALG_NAME
+
+/* Netlink message attributes. */
+enum crypto_attr_type_t {
+ CRYPTOCFGA_UNSPEC,
+ CRYPTOCFGA_PRIORITY_VAL, /* __u32 */
+ CRYPTOCFGA_REPORT_LARVAL, /* struct crypto_report_larval */
+ CRYPTOCFGA_REPORT_HASH, /* struct crypto_report_hash */
+ CRYPTOCFGA_REPORT_BLKCIPHER, /* struct crypto_report_blkcipher */
+ CRYPTOCFGA_REPORT_AEAD, /* struct crypto_report_aead */
+ CRYPTOCFGA_REPORT_COMPRESS, /* struct crypto_report_comp */
+ CRYPTOCFGA_REPORT_RNG, /* struct crypto_report_rng */
+ CRYPTOCFGA_REPORT_CIPHER, /* struct crypto_report_cipher */
+ __CRYPTOCFGA_MAX
+
+#define CRYPTOCFGA_MAX (__CRYPTOCFGA_MAX - 1)
+};
+
+struct crypto_user_alg {
+ char cru_name[CRYPTO_MAX_ALG_NAME];
+ char cru_driver_name[CRYPTO_MAX_ALG_NAME];
+ char cru_module_name[CRYPTO_MAX_ALG_NAME];
+ __u32 cru_type;
+ __u32 cru_mask;
+ __u32 cru_refcnt;
+ __u32 cru_flags;
+};
+
+struct crypto_report_larval {
+ char type[CRYPTO_MAX_NAME];
+};
+
+struct crypto_report_hash {
+ char type[CRYPTO_MAX_NAME];
+ unsigned int blocksize;
+ unsigned int digestsize;
+};
+
+struct crypto_report_cipher {
+ char type[CRYPTO_MAX_ALG_NAME];
+ unsigned int blocksize;
+ unsigned int min_keysize;
+ unsigned int max_keysize;
+};
+
+struct crypto_report_blkcipher {
+ char type[CRYPTO_MAX_NAME];
+ char geniv[CRYPTO_MAX_NAME];
+ unsigned int blocksize;
+ unsigned int min_keysize;
+ unsigned int max_keysize;
+ unsigned int ivsize;
+};
+
+struct crypto_report_aead {
+ char type[CRYPTO_MAX_NAME];
+ char geniv[CRYPTO_MAX_NAME];
+ unsigned int blocksize;
+ unsigned int maxauthsize;
+ unsigned int ivsize;
+};
+
+struct crypto_report_comp {
+ char type[CRYPTO_MAX_NAME];
+};
+
+struct crypto_report_rng {
+ char type[CRYPTO_MAX_NAME];
+ unsigned int seedsize;
+};
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 62157c0..4df9261 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -165,6 +165,7 @@
unsigned int, const char *, const struct qstr *);
int (*d_delete)(const struct dentry *);
void (*d_release)(struct dentry *);
+ void (*d_prune)(struct dentry *);
void (*d_iput)(struct dentry *, struct inode *);
char *(*d_dname)(struct dentry *, char *, int);
struct vfsmount *(*d_automount)(struct path *);
@@ -184,8 +185,9 @@
#define DCACHE_OP_COMPARE 0x0002
#define DCACHE_OP_REVALIDATE 0x0004
#define DCACHE_OP_DELETE 0x0008
+#define DCACHE_OP_PRUNE 0x0010
-#define DCACHE_DISCONNECTED 0x0010
+#define DCACHE_DISCONNECTED 0x0020
/* This dentry is possibly not currently connected to the dcache tree, in
* which case its parent will either be itself, or will have this flag as
* well. nfsd will not use a dentry with this bit set, but will first
@@ -196,8 +198,8 @@
* dentry into place and return that dentry rather than the passed one,
* typically using d_splice_alias. */
-#define DCACHE_REFERENCED 0x0020 /* Recently used, don't discard. */
-#define DCACHE_RCUACCESS 0x0040 /* Entry has ever been RCU-visible */
+#define DCACHE_REFERENCED 0x0040 /* Recently used, don't discard. */
+#define DCACHE_RCUACCESS 0x0080 /* Entry has ever been RCU-visible */
#define DCACHE_CANT_MOUNT 0x0100
#define DCACHE_GENOCIDE 0x0200
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 99e3e50..98f34b8 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -10,6 +10,7 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
+#include <linux/ratelimit.h>
struct dm_dev;
struct dm_target;
@@ -127,10 +128,6 @@
* Information about a target type
*/
-/*
- * Target features
- */
-
struct target_type {
uint64_t features;
const char *name;
@@ -159,6 +156,30 @@
struct list_head list;
};
+/*
+ * Target features
+ */
+
+/*
+ * Any table that contains an instance of this target must have only one.
+ */
+#define DM_TARGET_SINGLETON 0x00000001
+#define dm_target_needs_singleton(type) ((type)->features & DM_TARGET_SINGLETON)
+
+/*
+ * Indicates that a target does not support read-only devices.
+ */
+#define DM_TARGET_ALWAYS_WRITEABLE 0x00000002
+#define dm_target_always_writeable(type) \
+ ((type)->features & DM_TARGET_ALWAYS_WRITEABLE)
+
+/*
+ * Any device that contains a table with an instance of this target may never
+ * have tables containing any different target type.
+ */
+#define DM_TARGET_IMMUTABLE 0x00000004
+#define dm_target_is_immutable(type) ((type)->features & DM_TARGET_IMMUTABLE)
+
struct dm_target {
struct dm_table *table;
struct target_type *type;
@@ -375,6 +396,14 @@
*---------------------------------------------------------------*/
#define DM_NAME "device-mapper"
+#ifdef CONFIG_PRINTK
+extern struct ratelimit_state dm_ratelimit_state;
+
+#define dm_ratelimit() __ratelimit(&dm_ratelimit_state)
+#else
+#define dm_ratelimit() 0
+#endif
+
#define DMCRIT(f, arg...) \
printk(KERN_CRIT DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
@@ -382,7 +411,7 @@
printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
#define DMERR_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " \
f "\n", ## arg); \
} while (0)
@@ -391,7 +420,7 @@
printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
#define DMWARN_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " \
f "\n", ## arg); \
} while (0)
@@ -400,7 +429,7 @@
printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
#define DMINFO_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f \
"\n", ## arg); \
} while (0)
@@ -410,7 +439,7 @@
printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX " DEBUG: " f "\n", ## arg)
# define DMDEBUG_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX ": " f \
"\n", ## arg); \
} while (0)
diff --git a/include/linux/device.h b/include/linux/device.h
index bdcf361..e88abee 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -33,6 +33,7 @@
struct subsys_private;
struct bus_type;
struct device_node;
+struct iommu_ops;
struct bus_attribute {
struct attribute attr;
@@ -67,6 +68,9 @@
* @resume: Called to bring a device on this bus out of sleep mode.
* @pm: Power management operations of this bus, callback the specific
* device driver's pm-ops.
+ * @iommu_ops IOMMU specific operations for this bus, used to attach IOMMU
+ * driver implementations to a bus and allow the driver to do
+ * bus-specific setup
* @p: The private data of the driver core, only the driver core can
* touch this.
*
@@ -96,6 +100,8 @@
const struct dev_pm_ops *pm;
+ struct iommu_ops *iommu_ops;
+
struct subsys_private *p;
};
@@ -616,8 +622,8 @@
return kobject_name(&dev->kobj);
}
-extern int dev_set_name(struct device *dev, const char *name, ...)
- __attribute__((format(printf, 2, 3)));
+extern __printf(2, 3)
+int dev_set_name(struct device *dev, const char *name, ...);
#ifdef CONFIG_NUMA
static inline int dev_to_node(struct device *dev)
@@ -747,10 +753,10 @@
void *drvdata,
const char *fmt,
va_list vargs);
-extern struct device *device_create(struct class *cls, struct device *parent,
- dev_t devt, void *drvdata,
- const char *fmt, ...)
- __attribute__((format(printf, 5, 6)));
+extern __printf(5, 6)
+struct device *device_create(struct class *cls, struct device *parent,
+ dev_t devt, void *drvdata,
+ const char *fmt, ...);
extern void device_destroy(struct class *cls, dev_t devt);
/*
@@ -794,64 +800,56 @@
extern int __dev_printk(const char *level, const struct device *dev,
struct va_format *vaf);
-extern int dev_printk(const char *level, const struct device *dev,
- const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern int dev_emerg(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int dev_alert(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int dev_crit(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int dev_err(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int dev_warn(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int dev_notice(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int _dev_info(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(3, 4)
+int dev_printk(const char *level, const struct device *dev,
+ const char *fmt, ...)
+ ;
+extern __printf(2, 3)
+int dev_emerg(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_alert(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_crit(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_err(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_warn(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_notice(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int _dev_info(const struct device *dev, const char *fmt, ...);
#else
static inline int __dev_printk(const char *level, const struct device *dev,
struct va_format *vaf)
- { return 0; }
-static inline int dev_printk(const char *level, const struct device *dev,
- const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
-static inline int dev_printk(const char *level, const struct device *dev,
- const char *fmt, ...)
- { return 0; }
+{ return 0; }
+static inline __printf(3, 4)
+int dev_printk(const char *level, const struct device *dev,
+ const char *fmt, ...)
+{ return 0; }
-static inline int dev_emerg(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-static inline int dev_emerg(const struct device *dev, const char *fmt, ...)
- { return 0; }
-static inline int dev_crit(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-static inline int dev_crit(const struct device *dev, const char *fmt, ...)
- { return 0; }
-static inline int dev_alert(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-static inline int dev_alert(const struct device *dev, const char *fmt, ...)
- { return 0; }
-static inline int dev_err(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-static inline int dev_err(const struct device *dev, const char *fmt, ...)
- { return 0; }
-static inline int dev_warn(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-static inline int dev_warn(const struct device *dev, const char *fmt, ...)
- { return 0; }
-static inline int dev_notice(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-static inline int dev_notice(const struct device *dev, const char *fmt, ...)
- { return 0; }
-static inline int _dev_info(const struct device *dev, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-static inline int _dev_info(const struct device *dev, const char *fmt, ...)
- { return 0; }
+static inline __printf(2, 3)
+int dev_emerg(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_crit(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_alert(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_err(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_warn(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_notice(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int _dev_info(const struct device *dev, const char *fmt, ...)
+{ return 0; }
#endif
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
index 0cb8eff..75fd5573 100644
--- a/include/linux/dm-ioctl.h
+++ b/include/linux/dm-ioctl.h
@@ -267,9 +267,9 @@
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 21
+#define DM_VERSION_MINOR 22
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2011-07-06)"
+#define DM_VERSION_EXTRA "-ioctl (2011-10-19)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
diff --git a/include/linux/dm-kcopyd.h b/include/linux/dm-kcopyd.h
index 5e54458..47d9d37 100644
--- a/include/linux/dm-kcopyd.h
+++ b/include/linux/dm-kcopyd.h
@@ -57,5 +57,9 @@
dm_kcopyd_notify_fn fn, void *context);
void dm_kcopyd_do_callback(void *job, int read_err, unsigned long write_err);
+int dm_kcopyd_zero(struct dm_kcopyd_client *kc,
+ unsigned num_dests, struct dm_io_region *dests,
+ unsigned flags, dm_kcopyd_notify_fn fn, void *context);
+
#endif /* __KERNEL__ */
#endif /* _LINUX_DM_KCOPYD_H */
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
index eeace7d..0678c2a 100644
--- a/include/linux/dm-log-userspace.h
+++ b/include/linux/dm-log-userspace.h
@@ -52,15 +52,20 @@
* Payload-to-userspace:
* A single string containing all the argv arguments separated by ' 's
* Payload-to-kernel:
- * None. ('data_size' in the dm_ulog_request struct should be 0.)
+ * A NUL-terminated string that is the name of the device that is used
+ * as the backing store for the log data. 'dm_get_device' will be called
+ * on this device. ('dm_put_device' will be called on this device
+ * automatically after calling DM_ULOG_DTR.) If there is no device needed
+ * for log data, 'data_size' in the dm_ulog_request struct should be 0.
*
* The UUID contained in the dm_ulog_request structure is the reference that
* will be used by all request types to a specific log. The constructor must
- * record this assotiation with instance created.
+ * record this association with the instance created.
*
* When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
+ * dm_ulog_request to the kernel - setting the 'error' field, filling the
+ * data field with the log device if necessary, and setting 'data_size'
+ * appropriately.
*/
#define DM_ULOG_CTR 1
@@ -377,8 +382,11 @@
* dm_ulog_request or a change in the way requests are
* issued/handled. Changes are outlined here:
* version 1: Initial implementation
+ * version 2: DM_ULOG_CTR allowed to return a string containing a
+ * device name that is to be registered with DM via
+ * 'dm_get_device'.
*/
-#define DM_ULOG_REQUEST_VERSION 1
+#define DM_ULOG_REQUEST_VERSION 2
struct dm_ulog_request {
/*
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 347fdc3..be86ae1 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_DMA_MAPPING_H
#define _LINUX_DMA_MAPPING_H
+#include <linux/string.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/dma-attrs.h>
@@ -117,6 +118,15 @@
return -EIO;
}
+static inline void *dma_zalloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+{
+ void *ret = dma_alloc_coherent(dev, size, dma_handle, flag);
+ if (ret)
+ memset(ret, 0, size);
+ return ret;
+}
+
#ifdef CONFIG_HAS_DMA
static inline int dma_get_cache_alignment(void)
{
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index a8b1a84..731a609 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -26,6 +26,8 @@
#include <linux/msi.h>
#include <linux/irqreturn.h>
+struct acpi_dmar_header;
+
/* DMAR Flags */
#define DMAR_INTR_REMAP 0x1
#define DMAR_X2APIC_OPT_OUT 0x2
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
index 36a3ed6..1b1094c 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -349,6 +349,7 @@
SYS_CMMB,
SYS_DAB,
SYS_DVBT2,
+ SYS_TURBO,
} fe_delivery_system_t;
struct dtv_cmds_h {
diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
index 1421cc8..66594b1 100644
--- a/include/linux/dvb/version.h
+++ b/include/linux/dvb/version.h
@@ -24,6 +24,6 @@
#define _DVBVERSION_H_
#define DVB_API_VERSION 5
-#define DVB_API_VERSION_MINOR 3
+#define DVB_API_VERSION_MINOR 4
#endif /*_DVBVERSION_H_*/
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index 13aae80..0564e3c 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -37,22 +37,21 @@
#if defined(CONFIG_DYNAMIC_DEBUG)
extern int ddebug_remove_module(const char *mod_name);
-extern int __dynamic_pr_debug(struct _ddebug *descriptor, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+int __dynamic_pr_debug(struct _ddebug *descriptor, const char *fmt, ...);
struct device;
-extern int __dynamic_dev_dbg(struct _ddebug *descriptor,
- const struct device *dev,
- const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+int __dynamic_dev_dbg(struct _ddebug *descriptor, const struct device *dev,
+ const char *fmt, ...);
struct net_device;
-extern int __dynamic_netdev_dbg(struct _ddebug *descriptor,
- const struct net_device *dev,
- const char *fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+int __dynamic_netdev_dbg(struct _ddebug *descriptor,
+ const struct net_device *dev,
+ const char *fmt, ...);
#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \
static struct _ddebug __used __aligned(8) \
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 4a73257..055b248 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -42,4 +42,354 @@
return;
}
+#define EDAC_MC_LABEL_LEN 31
+#define MC_PROC_NAME_MAX_LEN 7
+
+/* memory devices */
+enum dev_type {
+ DEV_UNKNOWN = 0,
+ DEV_X1,
+ DEV_X2,
+ DEV_X4,
+ DEV_X8,
+ DEV_X16,
+ DEV_X32, /* Do these parts exist? */
+ DEV_X64 /* Do these parts exist? */
+};
+
+#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN)
+#define DEV_FLAG_X1 BIT(DEV_X1)
+#define DEV_FLAG_X2 BIT(DEV_X2)
+#define DEV_FLAG_X4 BIT(DEV_X4)
+#define DEV_FLAG_X8 BIT(DEV_X8)
+#define DEV_FLAG_X16 BIT(DEV_X16)
+#define DEV_FLAG_X32 BIT(DEV_X32)
+#define DEV_FLAG_X64 BIT(DEV_X64)
+
+/* memory types */
+enum mem_type {
+ MEM_EMPTY = 0, /* Empty csrow */
+ MEM_RESERVED, /* Reserved csrow type */
+ MEM_UNKNOWN, /* Unknown csrow type */
+ MEM_FPM, /* Fast page mode */
+ MEM_EDO, /* Extended data out */
+ MEM_BEDO, /* Burst Extended data out */
+ MEM_SDR, /* Single data rate SDRAM */
+ MEM_RDR, /* Registered single data rate SDRAM */
+ MEM_DDR, /* Double data rate SDRAM */
+ MEM_RDDR, /* Registered Double data rate SDRAM */
+ MEM_RMBS, /* Rambus DRAM */
+ MEM_DDR2, /* DDR2 RAM */
+ MEM_FB_DDR2, /* fully buffered DDR2 */
+ MEM_RDDR2, /* Registered DDR2 RAM */
+ MEM_XDR, /* Rambus XDR */
+ MEM_DDR3, /* DDR3 RAM */
+ MEM_RDDR3, /* Registered DDR3 RAM */
+};
+
+#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
+#define MEM_FLAG_RESERVED BIT(MEM_RESERVED)
+#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN)
+#define MEM_FLAG_FPM BIT(MEM_FPM)
+#define MEM_FLAG_EDO BIT(MEM_EDO)
+#define MEM_FLAG_BEDO BIT(MEM_BEDO)
+#define MEM_FLAG_SDR BIT(MEM_SDR)
+#define MEM_FLAG_RDR BIT(MEM_RDR)
+#define MEM_FLAG_DDR BIT(MEM_DDR)
+#define MEM_FLAG_RDDR BIT(MEM_RDDR)
+#define MEM_FLAG_RMBS BIT(MEM_RMBS)
+#define MEM_FLAG_DDR2 BIT(MEM_DDR2)
+#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
+#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
+#define MEM_FLAG_XDR BIT(MEM_XDR)
+#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
+
+/* chipset Error Detection and Correction capabilities and mode */
+enum edac_type {
+ EDAC_UNKNOWN = 0, /* Unknown if ECC is available */
+ EDAC_NONE, /* Doesn't support ECC */
+ EDAC_RESERVED, /* Reserved ECC type */
+ EDAC_PARITY, /* Detects parity errors */
+ EDAC_EC, /* Error Checking - no correction */
+ EDAC_SECDED, /* Single bit error correction, Double detection */
+ EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */
+ EDAC_S4ECD4ED, /* Chipkill x4 devices */
+ EDAC_S8ECD8ED, /* Chipkill x8 devices */
+ EDAC_S16ECD16ED, /* Chipkill x16 devices */
+};
+
+#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
+#define EDAC_FLAG_NONE BIT(EDAC_NONE)
+#define EDAC_FLAG_PARITY BIT(EDAC_PARITY)
+#define EDAC_FLAG_EC BIT(EDAC_EC)
+#define EDAC_FLAG_SECDED BIT(EDAC_SECDED)
+#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED)
+#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED)
+#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
+#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)
+
+/* scrubbing capabilities */
+enum scrub_type {
+ SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */
+ SCRUB_NONE, /* No scrubber */
+ SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */
+ SCRUB_SW_SRC, /* Software scrub only errors */
+ SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */
+ SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */
+ SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */
+ SCRUB_HW_SRC, /* Hardware scrub only errors */
+ SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */
+ SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */
+};
+
+#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
+#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC)
+#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC)
+#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE)
+#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG)
+#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC)
+#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC)
+#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE)
+
+/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
+
+/* EDAC internal operation states */
+#define OP_ALLOC 0x100
+#define OP_RUNNING_POLL 0x201
+#define OP_RUNNING_INTERRUPT 0x202
+#define OP_RUNNING_POLL_INTR 0x203
+#define OP_OFFLINE 0x300
+
+/*
+ * There are several things to be aware of that aren't at all obvious:
+ *
+ *
+ * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
+ *
+ * These are some of the many terms that are thrown about that don't always
+ * mean what people think they mean (Inconceivable!). In the interest of
+ * creating a common ground for discussion, terms and their definitions
+ * will be established.
+ *
+ * Memory devices: The individual chip on a memory stick. These devices
+ * commonly output 4 and 8 bits each. Grouping several
+ * of these in parallel provides 64 bits which is common
+ * for a memory stick.
+ *
+ * Memory Stick: A printed circuit board that aggregates multiple
+ * memory devices in parallel. This is the atomic
+ * memory component that is purchaseable by Joe consumer
+ * and loaded into a memory socket.
+ *
+ * Socket: A physical connector on the motherboard that accepts
+ * a single memory stick.
+ *
+ * Channel: Set of memory devices on a memory stick that must be
+ * grouped in parallel with one or more additional
+ * channels from other memory sticks. This parallel
+ * grouping of the output from multiple channels are
+ * necessary for the smallest granularity of memory access.
+ * Some memory controllers are capable of single channel -
+ * which means that memory sticks can be loaded
+ * individually. Other memory controllers are only
+ * capable of dual channel - which means that memory
+ * sticks must be loaded as pairs (see "socket set").
+ *
+ * Chip-select row: All of the memory devices that are selected together.
+ * for a single, minimum grain of memory access.
+ * This selects all of the parallel memory devices across
+ * all of the parallel channels. Common chip-select rows
+ * for single channel are 64 bits, for dual channel 128
+ * bits.
+ *
+ * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
+ * Motherboards commonly drive two chip-select pins to
+ * a memory stick. A single-ranked stick, will occupy
+ * only one of those rows. The other will be unused.
+ *
+ * Double-Ranked stick: A double-ranked stick has two chip-select rows which
+ * access different sets of memory devices. The two
+ * rows cannot be accessed concurrently.
+ *
+ * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
+ * A double-sided stick has two chip-select rows which
+ * access different sets of memory devices. The two
+ * rows cannot be accessed concurrently. "Double-sided"
+ * is irrespective of the memory devices being mounted
+ * on both sides of the memory stick.
+ *
+ * Socket set: All of the memory sticks that are required for
+ * a single memory access or all of the memory sticks
+ * spanned by a chip-select row. A single socket set
+ * has two chip-select rows and if double-sided sticks
+ * are used these will occupy those chip-select rows.
+ *
+ * Bank: This term is avoided because it is unclear when
+ * needing to distinguish between chip-select rows and
+ * socket sets.
+ *
+ * Controller pages:
+ *
+ * Physical pages:
+ *
+ * Virtual pages:
+ *
+ *
+ * STRUCTURE ORGANIZATION AND CHOICES
+ *
+ *
+ *
+ * PS - I enjoyed writing all that about as much as you enjoyed reading it.
+ */
+
+struct channel_info {
+ int chan_idx; /* channel index */
+ u32 ce_count; /* Correctable Errors for this CHANNEL */
+ char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */
+ struct csrow_info *csrow; /* the parent */
+};
+
+struct csrow_info {
+ unsigned long first_page; /* first page number in dimm */
+ unsigned long last_page; /* last page number in dimm */
+ unsigned long page_mask; /* used for interleaving -
+ * 0UL for non intlv
+ */
+ u32 nr_pages; /* number of pages in csrow */
+ u32 grain; /* granularity of reported error in bytes */
+ int csrow_idx; /* the chip-select row */
+ enum dev_type dtype; /* memory device type */
+ u32 ue_count; /* Uncorrectable Errors for this csrow */
+ u32 ce_count; /* Correctable Errors for this csrow */
+ enum mem_type mtype; /* memory csrow type */
+ enum edac_type edac_mode; /* EDAC mode for this csrow */
+ struct mem_ctl_info *mci; /* the parent */
+
+ struct kobject kobj; /* sysfs kobject for this csrow */
+
+ /* channel information for this csrow */
+ u32 nr_channels;
+ struct channel_info *channels;
+};
+
+struct mcidev_sysfs_group {
+ const char *name; /* group name */
+ const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+ struct list_head list; /* list for all instances within a mc */
+
+ struct kobject kobj; /* kobj for the group */
+
+ const struct mcidev_sysfs_group *grp; /* group description table */
+ struct mem_ctl_info *mci; /* the parent */
+};
+
+/* mcidev_sysfs_attribute structure
+ * used for driver sysfs attributes and in mem_ctl_info
+ * sysfs top level entries
+ */
+struct mcidev_sysfs_attribute {
+ /* It should use either attr or grp */
+ struct attribute attr;
+ const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */
+
+ /* Ops for show/store values at the attribute - not used on group */
+ ssize_t (*show)(struct mem_ctl_info *,char *);
+ ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
+};
+
+/* MEMORY controller information structure
+ */
+struct mem_ctl_info {
+ struct list_head link; /* for global list of mem_ctl_info structs */
+
+ struct module *owner; /* Module owner of this control struct */
+
+ unsigned long mtype_cap; /* memory types supported by mc */
+ unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */
+ unsigned long edac_cap; /* configuration capabilities - this is
+ * closely related to edac_ctl_cap. The
+ * difference is that the controller may be
+ * capable of s4ecd4ed which would be listed
+ * in edac_ctl_cap, but if channels aren't
+ * capable of s4ecd4ed then the edac_cap would
+ * not have that capability.
+ */
+ unsigned long scrub_cap; /* chipset scrub capabilities */
+ enum scrub_type scrub_mode; /* current scrub mode */
+
+ /* Translates sdram memory scrub rate given in bytes/sec to the
+ internal representation and configures whatever else needs
+ to be configured.
+ */
+ int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
+
+ /* Get the current sdram memory scrub rate from the internal
+ representation and converts it to the closest matching
+ bandwidth in bytes/sec.
+ */
+ int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
+
+
+ /* pointer to edac checking routine */
+ void (*edac_check) (struct mem_ctl_info * mci);
+
+ /*
+ * Remaps memory pages: controller pages to physical pages.
+ * For most MC's, this will be NULL.
+ */
+ /* FIXME - why not send the phys page to begin with? */
+ unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
+ unsigned long page);
+ int mc_idx;
+ int nr_csrows;
+ struct csrow_info *csrows;
+ /*
+ * FIXME - what about controllers on other busses? - IDs must be
+ * unique. dev pointer should be sufficiently unique, but
+ * BUS:SLOT.FUNC numbers may not be unique.
+ */
+ struct device *dev;
+ const char *mod_name;
+ const char *mod_ver;
+ const char *ctl_name;
+ const char *dev_name;
+ char proc_name[MC_PROC_NAME_MAX_LEN + 1];
+ void *pvt_info;
+ u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */
+ u32 ce_noinfo_count; /* Correctable Errors w/o info */
+ u32 ue_count; /* Total Uncorrectable Errors for this MC */
+ u32 ce_count; /* Total Correctable Errors for this MC */
+ unsigned long start_time; /* mci load start time (in jiffies) */
+
+ struct completion complete;
+
+ /* edac sysfs device control */
+ struct kobject edac_mci_kobj;
+
+ /* list for all grp instances within a mc */
+ struct list_head grp_kobj_list;
+
+ /* Additional top controller level attributes, but specified
+ * by the low level driver.
+ *
+ * Set by the low level driver to provide attributes at the
+ * controller level, same level as 'ue_count' and 'ce_count' above.
+ * An array of structures, NULL terminated
+ *
+ * If attributes are desired, then set to array of attributes
+ * If no attributes are desired, leave NULL
+ */
+ const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
+
+ /* work struct for this MC */
+ struct delayed_work work;
+
+ /* the internal state of this controller instance */
+ int op_state;
+};
+
#endif
diff --git a/include/linux/edac_mce.h b/include/linux/edac_mce.h
deleted file mode 100644
index f974fc0..0000000
--- a/include/linux/edac_mce.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Provides edac interface to mcelog events
- *
- * This file may be distributed under the terms of the
- * GNU General Public License version 2.
- *
- * Copyright (c) 2009 by:
- * Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * Red Hat Inc. http://www.redhat.com
- */
-
-#if defined(CONFIG_EDAC_MCE) || \
- (defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE))
-
-#include <asm/mce.h>
-#include <linux/list.h>
-
-struct edac_mce {
- struct list_head list;
-
- void *priv;
- int (*check_error)(void *priv, struct mce *mce);
-};
-
-int edac_mce_register(struct edac_mce *edac_mce);
-void edac_mce_unregister(struct edac_mce *edac_mce);
-int edac_mce_parse(struct mce *mce);
-
-#else
-#define edac_mce_parse(mce) (0)
-#endif
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 110821c..31f0508 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -395,6 +395,7 @@
#define NT_S390_CTRS 0x304 /* s390 control registers */
#define NT_S390_PREFIX 0x305 /* s390 prefix register */
#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */
+#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */
#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */
diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
index 53792bf..ce1b719 100644
--- a/include/linux/ext2_fs.h
+++ b/include/linux/ext2_fs.h
@@ -197,8 +197,8 @@
/* Flags that should be inherited by new inodes from their parent. */
#define EXT2_FL_INHERITED (EXT2_SECRM_FL | EXT2_UNRM_FL | EXT2_COMPR_FL |\
- EXT2_SYNC_FL | EXT2_IMMUTABLE_FL | EXT2_APPEND_FL |\
- EXT2_NODUMP_FL | EXT2_NOATIME_FL | EXT2_COMPRBLK_FL|\
+ EXT2_SYNC_FL | EXT2_NODUMP_FL |\
+ EXT2_NOATIME_FL | EXT2_COMPRBLK_FL |\
EXT2_NOCOMP_FL | EXT2_JOURNAL_DATA_FL |\
EXT2_NOTAIL_FL | EXT2_DIRSYNC_FL)
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 67a803a..dec9911 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -180,8 +180,8 @@
/* Flags that should be inherited by new inodes from their parent. */
#define EXT3_FL_INHERITED (EXT3_SECRM_FL | EXT3_UNRM_FL | EXT3_COMPR_FL |\
- EXT3_SYNC_FL | EXT3_IMMUTABLE_FL | EXT3_APPEND_FL |\
- EXT3_NODUMP_FL | EXT3_NOATIME_FL | EXT3_COMPRBLK_FL|\
+ EXT3_SYNC_FL | EXT3_NODUMP_FL |\
+ EXT3_NOATIME_FL | EXT3_COMPRBLK_FL |\
EXT3_NOCOMPR_FL | EXT3_JOURNAL_DATA_FL |\
EXT3_NOTAIL_FL | EXT3_DIRSYNC_FL)
@@ -381,7 +381,7 @@
* Mount flags
*/
#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */
-#define EXT3_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */
+/* EXT3_MOUNT_OLDALLOC was there */
#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */
#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */
#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */
@@ -937,15 +937,15 @@
ext3_fsblk_t n_blocks_count);
/* super.c */
-extern void ext3_error (struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void ext3_error(struct super_block *, const char *, const char *, ...);
extern void __ext3_std_error (struct super_block *, const char *, int);
-extern void ext3_abort (struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern void ext3_warning (struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern void ext3_msg(struct super_block *, const char *, const char *, ...)
- __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void ext3_abort(struct super_block *, const char *, const char *, ...);
+extern __printf(3, 4)
+void ext3_warning(struct super_block *, const char *, const char *, ...);
+extern __printf(3, 4)
+void ext3_msg(struct super_block *, const char *, const char *, ...);
extern void ext3_update_dynamic_rev (struct super_block *sb);
#define ext3_std_error(sb, errno) \
diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h
index 258088a..6436525 100644
--- a/include/linux/ext3_fs_sb.h
+++ b/include/linux/ext3_fs_sb.h
@@ -76,10 +76,6 @@
struct mutex s_resize_lock;
unsigned long s_commit_interval;
struct block_device *journal_bdev;
-#ifdef CONFIG_JBD_DEBUG
- struct timer_list turn_ro_timer; /* For turning read-only (crash simulation) */
- wait_queue_head_t ro_wait_queue; /* For people waiting for the fs to go read-only */
-#endif
#ifdef CONFIG_QUOTA
char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index aa56cf3..a49b529 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -135,10 +135,25 @@
}
/*
- * Freezer-friendly wrappers around wait_event_interruptible() and
- * wait_event_interruptible_timeout(), originally defined in <linux/wait.h>
+ * Freezer-friendly wrappers around wait_event_interruptible(),
+ * wait_event_killable() and wait_event_interruptible_timeout(), originally
+ * defined in <linux/wait.h>
*/
+#define wait_event_freezekillable(wq, condition) \
+({ \
+ int __retval; \
+ do { \
+ __retval = wait_event_killable(wq, \
+ (condition) || freezing(current)); \
+ if (__retval && !freezing(current)) \
+ break; \
+ else if (!(condition)) \
+ __retval = -ERESTARTSYS; \
+ } while (try_to_freeze()); \
+ __retval; \
+})
+
#define wait_event_freezable(wq, condition) \
({ \
int __retval; \
@@ -190,6 +205,9 @@
#define wait_event_freezable_timeout(wq, condition, timeout) \
wait_event_interruptible_timeout(wq, condition, timeout)
+#define wait_event_freezekillable(wq, condition) \
+ wait_event_killable(wq, condition)
+
#endif /* !CONFIG_FREEZER */
#endif /* FREEZER_H_INCLUDED */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ba98668..0c4df26 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -58,14 +58,15 @@
#define NR_FILE 8192 /* this can well be larger on a larger system */
-#define MAY_EXEC 1
-#define MAY_WRITE 2
-#define MAY_READ 4
-#define MAY_APPEND 8
-#define MAY_ACCESS 16
-#define MAY_OPEN 32
-#define MAY_CHDIR 64
-#define MAY_NOT_BLOCK 128 /* called from RCU mode, don't block */
+#define MAY_EXEC 0x00000001
+#define MAY_WRITE 0x00000002
+#define MAY_READ 0x00000004
+#define MAY_APPEND 0x00000008
+#define MAY_ACCESS 0x00000010
+#define MAY_OPEN 0x00000020
+#define MAY_CHDIR 0x00000040
+/* called from RCU mode, don't block */
+#define MAY_NOT_BLOCK 0x00000080
/*
* flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
@@ -767,14 +768,25 @@
/* Stat data, not accessed from path walking */
unsigned long i_ino;
- unsigned int i_nlink;
+ /*
+ * Filesystems may only read i_nlink directly. They shall use the
+ * following functions for modification:
+ *
+ * (set|clear|inc|drop)_nlink
+ * inode_(inc|dec)_link_count
+ */
+ union {
+ const unsigned int i_nlink;
+ unsigned int __i_nlink;
+ };
dev_t i_rdev;
- loff_t i_size;
struct timespec i_atime;
struct timespec i_mtime;
struct timespec i_ctime;
- unsigned int i_blkbits;
+ spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
+ unsigned short i_bytes;
blkcnt_t i_blocks;
+ loff_t i_size;
#ifdef __NEED_I_SIZE_ORDERED
seqcount_t i_size_seqcount;
@@ -782,7 +794,6 @@
/* Misc */
unsigned long i_state;
- spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
struct mutex i_mutex;
unsigned long dirtied_when; /* jiffies of first dirtying */
@@ -796,9 +807,10 @@
struct rcu_head i_rcu;
};
atomic_t i_count;
+ unsigned int i_blkbits;
u64 i_version;
- unsigned short i_bytes;
atomic_t i_dio_count;
+ atomic_t i_writecount;
const struct file_operations *i_fop; /* former ->i_op->default_file_ops */
struct file_lock *i_flock;
struct address_space i_data;
@@ -822,7 +834,6 @@
#ifdef CONFIG_IMA
atomic_t i_readcount; /* struct files open RO */
#endif
- atomic_t i_writecount;
void *i_private; /* fs or device private pointer */
};
@@ -963,7 +974,12 @@
#define f_dentry f_path.dentry
#define f_vfsmnt f_path.mnt
const struct file_operations *f_op;
- spinlock_t f_lock; /* f_ep_links, f_flags, no IRQ */
+
+ /*
+ * Protects f_ep_links, f_flags, f_pos vs i_size in lseek SEEK_CUR.
+ * Must not be taken from IRQ context.
+ */
+ spinlock_t f_lock;
#ifdef CONFIG_SMP
int f_sb_list_cpu;
#endif
@@ -1627,9 +1643,10 @@
struct seq_file;
ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
- unsigned long nr_segs, unsigned long fast_segs,
- struct iovec *fast_pointer,
- struct iovec **ret_pointer);
+ unsigned long nr_segs, unsigned long fast_segs,
+ struct iovec *fast_pointer,
+ struct iovec **ret_pointer,
+ int check_access);
extern ssize_t vfs_read(struct file *, char __user *, size_t, loff_t *);
extern ssize_t vfs_write(struct file *, const char __user *, size_t, loff_t *);
@@ -1748,6 +1765,19 @@
}
/**
+ * set_nlink - directly set an inode's link count
+ * @inode: inode
+ * @nlink: new nlink (should be non-zero)
+ *
+ * This is a low-level filesystem helper to replace any
+ * direct filesystem manipulation of i_nlink.
+ */
+static inline void set_nlink(struct inode *inode, unsigned int nlink)
+{
+ inode->__i_nlink = nlink;
+}
+
+/**
* inc_nlink - directly increment an inode's link count
* @inode: inode
*
@@ -1757,7 +1787,7 @@
*/
static inline void inc_nlink(struct inode *inode)
{
- inode->i_nlink++;
+ inode->__i_nlink++;
}
static inline void inode_inc_link_count(struct inode *inode)
@@ -1779,7 +1809,7 @@
*/
static inline void drop_nlink(struct inode *inode)
{
- inode->i_nlink--;
+ inode->__i_nlink--;
}
/**
@@ -1792,7 +1822,7 @@
*/
static inline void clear_nlink(struct inode *inode)
{
- inode->i_nlink = 0;
+ inode->__i_nlink = 0;
}
static inline void inode_dec_link_count(struct inode *inode)
@@ -2401,8 +2431,8 @@
extern loff_t noop_llseek(struct file *file, loff_t offset, int origin);
extern loff_t no_llseek(struct file *file, loff_t offset, int origin);
extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin);
-extern loff_t generic_file_llseek_unlocked(struct file *file, loff_t offset,
- int origin);
+extern loff_t generic_file_llseek_size(struct file *file, loff_t offset,
+ int origin, loff_t maxsize);
extern int generic_file_open(struct inode * inode, struct file * filp);
extern int nonseekable_open(struct inode * inode, struct file * filp);
@@ -2628,8 +2658,8 @@
.llseek = generic_file_llseek, \
};
-static inline void __attribute__((format(printf, 1, 2)))
-__simple_attr_check_format(const char *fmt, ...)
+static inline __printf(1, 2)
+void __simple_attr_check_format(const char *fmt, ...)
{
/* don't do anything, just let the compiler check the arguments; */
}
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index af095b5..ce31408 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -492,10 +492,10 @@
/*
* out-of-line cache backend functions
*/
-extern void fscache_init_cache(struct fscache_cache *cache,
- const struct fscache_cache_ops *ops,
- const char *idfmt,
- ...) __attribute__ ((format (printf, 3, 4)));
+extern __printf(3, 4)
+void fscache_init_cache(struct fscache_cache *cache,
+ const struct fscache_cache_ops *ops,
+ const char *idfmt, ...);
extern int fscache_add_cache(struct fscache_cache *cache,
struct fscache_object *fsdef,
diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h
index daa9952..11c16a1 100644
--- a/include/linux/fsl-diu-fb.h
+++ b/include/linux/fsl-diu-fb.h
@@ -20,18 +20,8 @@
#ifndef __FSL_DIU_FB_H__
#define __FSL_DIU_FB_H__
-/* Arbitrary threshold to determine the allocation method
- * See mpc8610fb_set_par(), map_video_memory(), and unmap_video_memory()
- */
-#define MEM_ALLOC_THRESHOLD (1024*768*4+32)
-
#include <linux/types.h>
-struct mfb_alpha {
- int enable;
- int alpha;
-};
-
struct mfb_chroma_key {
int enable;
__u8 red_max;
@@ -43,25 +33,29 @@
};
struct aoi_display_offset {
- int x_aoi_d;
- int y_aoi_d;
+ __s32 x_aoi_d;
+ __s32 y_aoi_d;
};
#define MFB_SET_CHROMA_KEY _IOW('M', 1, struct mfb_chroma_key)
#define MFB_SET_BRIGHTNESS _IOW('M', 3, __u8)
+#define MFB_SET_ALPHA _IOW('M', 0, __u8)
+#define MFB_GET_ALPHA _IOR('M', 0, __u8)
+#define MFB_SET_AOID _IOW('M', 4, struct aoi_display_offset)
+#define MFB_GET_AOID _IOR('M', 4, struct aoi_display_offset)
+#define MFB_SET_PIXFMT _IOW('M', 8, __u32)
+#define MFB_GET_PIXFMT _IOR('M', 8, __u32)
-#define MFB_SET_ALPHA 0x80014d00
-#define MFB_GET_ALPHA 0x40014d00
-#define MFB_SET_AOID 0x80084d04
-#define MFB_GET_AOID 0x40084d04
-#define MFB_SET_PIXFMT 0x80014d08
-#define MFB_GET_PIXFMT 0x40014d08
-
-#define FBIOGET_GWINFO 0x46E0
-#define FBIOPUT_GWINFO 0x46E1
+/*
+ * The original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the
+ * wrong value for 'size' field of the ioctl. The current macros above use the
+ * right size, but we still need to provide backwards compatibility, at least
+ * for a while.
+*/
+#define MFB_SET_PIXFMT_OLD 0x80014d08
+#define MFB_GET_PIXFMT_OLD 0x40014d08
#ifdef __KERNEL__
-#include <linux/spinlock.h>
/*
* These are the fields of area descriptor(in DDR memory) for every plane
@@ -159,58 +153,12 @@
__be32 plut;
} __attribute__ ((packed));
-struct diu_hw {
- struct diu *diu_reg;
- spinlock_t reg_lock;
-
- __u32 mode; /* DIU operation mode */
-};
-
-struct diu_addr {
- __u8 __iomem *vaddr; /* Virtual address */
- dma_addr_t paddr; /* Physical address */
- __u32 offset;
-};
-
-struct diu_pool {
- struct diu_addr ad;
- struct diu_addr gamma;
- struct diu_addr pallete;
- struct diu_addr cursor;
-};
-
-#define FSL_DIU_BASE_OFFSET 0x2C000 /* Offset of DIU */
-#define INT_LCDC 64 /* DIU interrupt number */
-
-#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */
- /* 1 for plane 0, 2 for plane 1&2 each */
-
-/* Minimum X and Y resolutions */
-#define MIN_XRES 64
-#define MIN_YRES 64
-
-/* HW cursor parameters */
-#define MAX_CURS 32
-
-/* Modes of operation of DIU */
+/*
+ * Modes of operation of DIU. The DIU supports five different modes, but
+ * the driver only supports modes 0 and 1.
+ */
#define MFB_MODE0 0 /* DIU off */
#define MFB_MODE1 1 /* All three planes output to display */
-#define MFB_MODE2 2 /* Plane 1 to display, planes 2+3 written back*/
-#define MFB_MODE3 3 /* All three planes written back to memory */
-#define MFB_MODE4 4 /* Color bar generation */
-
-/* INT_STATUS/INT_MASK field descriptions */
-#define INT_VSYNC 0x01 /* Vsync interrupt */
-#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */
-#define INT_UNDRUN 0x04 /* Under run exception interrupt */
-#define INT_PARERR 0x08 /* Display parameters error interrupt */
-#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */
-
-/* Panels'operation modes */
-#define MFB_TYPE_OUTPUT 0 /* Panel output to display */
-#define MFB_TYPE_OFF 1 /* Panel off */
-#define MFB_TYPE_WB 2 /* Panel written back to memory */
-#define MFB_TYPE_TEST 3 /* Panel generate color bar */
#endif /* __KERNEL__ */
#endif /* __FSL_DIU_FB_H__ */
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index b65a6f4..069ee41 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -78,8 +78,8 @@
void gameport_unregister_port(struct gameport *gameport);
-void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+__printf(2, 3)
+void gameport_set_phys(struct gameport *gameport, const char *fmt, ...);
#else
@@ -93,8 +93,8 @@
return;
}
-static inline void gameport_set_phys(struct gameport *gameport,
- const char *fmt, ...)
+static inline __printf(2, 3)
+void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
{
return;
}
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 02fa469..6957350 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -21,6 +21,8 @@
#define dev_to_part(device) container_of((device), struct hd_struct, __dev)
#define disk_to_dev(disk) (&(disk)->part0.__dev)
#define part_to_dev(part) (&((part)->__dev))
+#define alias_name(disk) ((disk)->alias ? (disk)->alias : \
+ (disk)->disk_name)
extern struct device_type part_type;
extern struct kobject *block_depr;
@@ -58,6 +60,7 @@
#define DISK_MAX_PARTS 256
#define DISK_NAME_LEN 32
+#define ALIAS_LEN 256
#include <linux/major.h>
#include <linux/device.h>
@@ -162,6 +165,7 @@
* disks that can't be partitioned. */
char disk_name[DISK_NAME_LEN]; /* name of major driver */
+ char *alias; /* alias name of disk */
char *(*devnode)(struct gendisk *gd, mode_t *mode);
unsigned int events; /* supported events */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 17b5a0d..38ac48b 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -14,6 +14,18 @@
#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW)
#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+/**
+ * struct gpio - a structure describing a GPIO with configuration
+ * @gpio: the GPIO number
+ * @flags: GPIO configuration as specified by GPIOF_*
+ * @label: a literal description string of this GPIO
+ */
+struct gpio {
+ unsigned gpio;
+ unsigned long flags;
+ const char *label;
+};
+
#ifdef CONFIG_GENERIC_GPIO
#include <asm/gpio.h>
@@ -24,18 +36,8 @@
#include <linux/errno.h>
struct device;
-struct gpio;
struct gpio_chip;
-/*
- * Some platforms don't support the GPIO programming interface.
- *
- * In case some driver uses it anyway (it should normally have
- * depended on GENERIC_GPIO), these routines help the compiler
- * optimize out much GPIO-related code ... or trigger a runtime
- * warning when something is wrongly called.
- */
-
static inline bool gpio_is_valid(int number)
{
return false;
diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index 48c32eb..a9ace9c 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -22,6 +22,11 @@
extern int mincore_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
unsigned long addr, unsigned long end,
unsigned char *vec);
+extern int move_huge_pmd(struct vm_area_struct *vma,
+ struct vm_area_struct *new_vma,
+ unsigned long old_addr,
+ unsigned long new_addr, unsigned long old_end,
+ pmd_t *old_pmd, pmd_t *new_pmd);
extern int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
unsigned long addr, pgprot_t newprot);
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 8390efc..08a2fee 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -20,17 +20,49 @@
#include <linux/err.h>
#include <linux/sched.h>
+#include <linux/device.h>
/* hwspinlock mode argument */
#define HWLOCK_IRQSTATE 0x01 /* Disable interrupts, save state */
#define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */
struct hwspinlock;
+struct hwspinlock_device;
+struct hwspinlock_ops;
+
+/**
+ * struct hwspinlock_pdata - platform data for hwspinlock drivers
+ * @base_id: base id for this hwspinlock device
+ *
+ * hwspinlock devices provide system-wide hardware locks that are used
+ * by remote processors that have no other way to achieve synchronization.
+ *
+ * To achieve that, each physical lock must have a system-wide id number
+ * that is agreed upon, otherwise remote processors can't possibly assume
+ * they're using the same hardware lock.
+ *
+ * Usually boards have a single hwspinlock device, which provides several
+ * hwspinlocks, and in this case, they can be trivially numbered 0 to
+ * (num-of-locks - 1).
+ *
+ * In case boards have several hwspinlocks devices, a different base id
+ * should be used for each hwspinlock device (they can't all use 0 as
+ * a starting id!).
+ *
+ * This platform data structure should be used to provide the base id
+ * for each device (which is trivially 0 when only a single hwspinlock
+ * device exists). It can be shared between different platforms, hence
+ * its location.
+ */
+struct hwspinlock_pdata {
+ int base_id;
+};
#if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)
-int hwspin_lock_register(struct hwspinlock *lock);
-struct hwspinlock *hwspin_lock_unregister(unsigned int id);
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+ const struct hwspinlock_ops *ops, int base_id, int num_locks);
+int hwspin_lock_unregister(struct hwspinlock_device *bank);
struct hwspinlock *hwspin_lock_request(void);
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
int hwspin_lock_free(struct hwspinlock *hwlock);
@@ -94,16 +126,6 @@
return 0;
}
-static inline int hwspin_lock_register(struct hwspinlock *hwlock)
-{
- return -ENODEV;
-}
-
-static inline struct hwspinlock *hwspin_lock_unregister(unsigned int id)
-{
- return NULL;
-}
-
#endif /* !CONFIG_HWSPINLOCK */
/**
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 0aa0cbd..92a0dc7 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -32,10 +32,9 @@
struct omap_i2c_bus_platform_data {
u32 clkrate;
+ u32 rev;
+ u32 flags;
void (*set_mpu_wkup_lat)(struct device *dev, long set);
- int (*device_enable) (struct platform_device *pdev);
- int (*device_shutdown) (struct platform_device *pdev);
- int (*device_idle) (struct platform_device *pdev);
};
#endif
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index a6c652e..38a21c3 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -34,6 +34,7 @@
#include <linux/sched.h> /* for completion */
#include <linux/mutex.h>
#include <linux/of.h> /* for struct device_node */
+#include <linux/swab.h> /* for swab16 */
extern struct bus_type i2c_bus_type;
extern struct device_type i2c_adapter_type;
@@ -88,6 +89,22 @@
u8 command);
extern s32 i2c_smbus_write_word_data(const struct i2c_client *client,
u8 command, u16 value);
+
+static inline s32
+i2c_smbus_read_word_swapped(const struct i2c_client *client, u8 command)
+{
+ s32 value = i2c_smbus_read_word_data(client, command);
+
+ return (value < 0) ? value : swab16(value);
+}
+
+static inline s32
+i2c_smbus_write_word_swapped(const struct i2c_client *client,
+ u8 command, u16 value)
+{
+ return i2c_smbus_write_word_data(client, command, swab16(value));
+}
+
/* Returns the number of read bytes */
extern s32 i2c_smbus_read_block_data(const struct i2c_client *client,
u8 command, u8 *values);
diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h
index 591427a..506a9f7 100644
--- a/include/linux/i2c/tsc2007.h
+++ b/include/linux/i2c/tsc2007.h
@@ -5,7 +5,7 @@
struct tsc2007_platform_data {
u16 model; /* 2007. */
- u16 x_plate_ohms;
+ u16 x_plate_ohms; /* must be non-zero value */
u16 max_rt; /* max. resistance above which samples are ignored */
unsigned long poll_delay; /* delay (in ms) after pen-down event
before polling starts */
diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
index 6427d29..530e11b 100644
--- a/include/linux/i2c/twl4030-madc.h
+++ b/include/linux/i2c/twl4030-madc.h
@@ -129,6 +129,10 @@
#define REG_BCICTL2 0x024
#define TWL4030_BCI_ITHSENS 0x007
+/* Register and bits for GPBR1 register */
+#define TWL4030_REG_GPBR1 0x0c
+#define TWL4030_GPBR1_MADC_HFCLK_EN (1 << 7)
+
struct twl4030_madc_user_parms {
int channel;
int average;
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 44da482..12d5543 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -106,7 +106,7 @@
extern struct net_device *vlan_dev_real_dev(const struct net_device *dev);
extern u16 vlan_dev_vlan_id(const struct net_device *dev);
-extern bool vlan_do_receive(struct sk_buff **skb);
+extern bool vlan_do_receive(struct sk_buff **skb, bool last_handler);
extern struct sk_buff *vlan_untag(struct sk_buff *skb);
#else
@@ -128,9 +128,9 @@
return 0;
}
-static inline bool vlan_do_receive(struct sk_buff **skb)
+static inline bool vlan_do_receive(struct sk_buff **skb, bool last_handler)
{
- if ((*skb)->vlan_tci & VLAN_VID_MASK)
+ if (((*skb)->vlan_tci & VLAN_VID_MASK) && last_handler)
(*skb)->pkt_type = PACKET_OTHERHOST;
return false;
}
diff --git a/include/linux/input.h b/include/linux/input.h
index a637e78..3862e32 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -505,6 +505,7 @@
#define BTN_TOOL_FINGER 0x145
#define BTN_TOOL_MOUSE 0x146
#define BTN_TOOL_LENS 0x147
+#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
#define BTN_TOUCH 0x14a
#define BTN_STYLUS 0x14b
#define BTN_STYLUS2 0x14c
@@ -814,6 +815,7 @@
#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
@@ -1609,7 +1611,7 @@
struct file *effect_owners[];
};
-int input_ff_create(struct input_dev *dev, int max_effects);
+int input_ff_create(struct input_dev *dev, unsigned int max_effects);
void input_ff_destroy(struct input_dev *dev);
int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h
index ef792ec..1a05eee 100644
--- a/include/linux/input/adp5589.h
+++ b/include/linux/input/adp5589.h
@@ -1,5 +1,5 @@
/*
- * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller
+ * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller
*
* Copyright 2010-2011 Analog Devices Inc.
*
@@ -9,89 +9,9 @@
#ifndef _ADP5589_H
#define _ADP5589_H
-#define ADP5589_ID 0x00
-#define ADP5589_INT_STATUS 0x01
-#define ADP5589_STATUS 0x02
-#define ADP5589_FIFO_1 0x03
-#define ADP5589_FIFO_2 0x04
-#define ADP5589_FIFO_3 0x05
-#define ADP5589_FIFO_4 0x06
-#define ADP5589_FIFO_5 0x07
-#define ADP5589_FIFO_6 0x08
-#define ADP5589_FIFO_7 0x09
-#define ADP5589_FIFO_8 0x0A
-#define ADP5589_FIFO_9 0x0B
-#define ADP5589_FIFO_10 0x0C
-#define ADP5589_FIFO_11 0x0D
-#define ADP5589_FIFO_12 0x0E
-#define ADP5589_FIFO_13 0x0F
-#define ADP5589_FIFO_14 0x10
-#define ADP5589_FIFO_15 0x11
-#define ADP5589_FIFO_16 0x12
-#define ADP5589_GPI_INT_STAT_A 0x13
-#define ADP5589_GPI_INT_STAT_B 0x14
-#define ADP5589_GPI_INT_STAT_C 0x15
-#define ADP5589_GPI_STATUS_A 0x16
-#define ADP5589_GPI_STATUS_B 0x17
-#define ADP5589_GPI_STATUS_C 0x18
-#define ADP5589_RPULL_CONFIG_A 0x19
-#define ADP5589_RPULL_CONFIG_B 0x1A
-#define ADP5589_RPULL_CONFIG_C 0x1B
-#define ADP5589_RPULL_CONFIG_D 0x1C
-#define ADP5589_RPULL_CONFIG_E 0x1D
-#define ADP5589_GPI_INT_LEVEL_A 0x1E
-#define ADP5589_GPI_INT_LEVEL_B 0x1F
-#define ADP5589_GPI_INT_LEVEL_C 0x20
-#define ADP5589_GPI_EVENT_EN_A 0x21
-#define ADP5589_GPI_EVENT_EN_B 0x22
-#define ADP5589_GPI_EVENT_EN_C 0x23
-#define ADP5589_GPI_INTERRUPT_EN_A 0x24
-#define ADP5589_GPI_INTERRUPT_EN_B 0x25
-#define ADP5589_GPI_INTERRUPT_EN_C 0x26
-#define ADP5589_DEBOUNCE_DIS_A 0x27
-#define ADP5589_DEBOUNCE_DIS_B 0x28
-#define ADP5589_DEBOUNCE_DIS_C 0x29
-#define ADP5589_GPO_DATA_OUT_A 0x2A
-#define ADP5589_GPO_DATA_OUT_B 0x2B
-#define ADP5589_GPO_DATA_OUT_C 0x2C
-#define ADP5589_GPO_OUT_MODE_A 0x2D
-#define ADP5589_GPO_OUT_MODE_B 0x2E
-#define ADP5589_GPO_OUT_MODE_C 0x2F
-#define ADP5589_GPIO_DIRECTION_A 0x30
-#define ADP5589_GPIO_DIRECTION_B 0x31
-#define ADP5589_GPIO_DIRECTION_C 0x32
-#define ADP5589_UNLOCK1 0x33
-#define ADP5589_UNLOCK2 0x34
-#define ADP5589_EXT_LOCK_EVENT 0x35
-#define ADP5589_UNLOCK_TIMERS 0x36
-#define ADP5589_LOCK_CFG 0x37
-#define ADP5589_RESET1_EVENT_A 0x38
-#define ADP5589_RESET1_EVENT_B 0x39
-#define ADP5589_RESET1_EVENT_C 0x3A
-#define ADP5589_RESET2_EVENT_A 0x3B
-#define ADP5589_RESET2_EVENT_B 0x3C
-#define ADP5589_RESET_CFG 0x3D
-#define ADP5589_PWM_OFFT_LOW 0x3E
-#define ADP5589_PWM_OFFT_HIGH 0x3F
-#define ADP5589_PWM_ONT_LOW 0x40
-#define ADP5589_PWM_ONT_HIGH 0x41
-#define ADP5589_PWM_CFG 0x42
-#define ADP5589_CLOCK_DIV_CFG 0x43
-#define ADP5589_LOGIC_1_CFG 0x44
-#define ADP5589_LOGIC_2_CFG 0x45
-#define ADP5589_LOGIC_FF_CFG 0x46
-#define ADP5589_LOGIC_INT_EVENT_EN 0x47
-#define ADP5589_POLL_PTIME_CFG 0x48
-#define ADP5589_PIN_CONFIG_A 0x49
-#define ADP5589_PIN_CONFIG_B 0x4A
-#define ADP5589_PIN_CONFIG_C 0x4B
-#define ADP5589_PIN_CONFIG_D 0x4C
-#define ADP5589_GENERAL_CFG 0x4D
-#define ADP5589_INT_EN 0x4E
-
-#define ADP5589_DEVICE_ID_MASK 0xF
-
-/* Put one of these structures in i2c_board_info platform_data */
+/*
+ * ADP5589 specific GPI and Keymap defines
+ */
#define ADP5589_KEYMAPSIZE 88
@@ -127,6 +47,35 @@
#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1)
+/*
+ * ADP5585 specific GPI and Keymap defines
+ */
+
+#define ADP5585_KEYMAPSIZE 30
+
+#define ADP5585_GPI_PIN_ROW0 37
+#define ADP5585_GPI_PIN_ROW1 38
+#define ADP5585_GPI_PIN_ROW2 39
+#define ADP5585_GPI_PIN_ROW3 40
+#define ADP5585_GPI_PIN_ROW4 41
+#define ADP5585_GPI_PIN_ROW5 42
+#define ADP5585_GPI_PIN_COL0 43
+#define ADP5585_GPI_PIN_COL1 44
+#define ADP5585_GPI_PIN_COL2 45
+#define ADP5585_GPI_PIN_COL3 46
+#define ADP5585_GPI_PIN_COL4 47
+#define GPI_LOGIC 48
+
+#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0
+#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5
+#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0
+#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4
+
+#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE
+#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END
+
+#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1)
+
struct adp5589_gpi_map {
unsigned short pin;
unsigned short sw_evt;
@@ -159,7 +108,7 @@
#define RESET2_POL_HIGH (1 << 7)
#define RESET2_POL_LOW (0 << 7)
-/* Mask Bits:
+/* ADP5589 Mask Bits:
* C C C C C C C C C C C | R R R R R R R R
* 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0
* 0
@@ -168,18 +117,44 @@
* 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0
*/
-#define ADP_ROW(x) (1 << (x))
-#define ADP_COL(x) (1 << (x + 8))
+#define ADP_ROW(x) (1 << (x))
+#define ADP_COL(x) (1 << (x + 8))
+#define ADP5589_ROW_MASK 0xFF
+#define ADP5589_COL_MASK 0xFF
+#define ADP5589_COL_SHIFT 8
+#define ADP5589_MAX_ROW_NUM 7
+#define ADP5589_MAX_COL_NUM 10
+
+/* ADP5585 Mask Bits:
+ * C C C C C | R R R R R R
+ * 4 3 2 1 0 | 5 4 3 2 1 0
+ *
+ * ---- BIT -- -----------
+ * 1 0 0 0 0 | 0 0 0 0 0 0
+ * 0 9 8 7 6 | 5 4 3 2 1 0
+ */
+
+#define ADP5585_ROW_MASK 0x3F
+#define ADP5585_COL_MASK 0x1F
+#define ADP5585_ROW_SHIFT 0
+#define ADP5585_COL_SHIFT 6
+#define ADP5585_MAX_ROW_NUM 5
+#define ADP5585_MAX_COL_NUM 4
+
+#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK))
+#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT))
+
+/* Put one of these structures in i2c_board_info platform_data */
struct adp5589_kpad_platform_data {
unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */
const unsigned short *keymap; /* Pointer to keymap */
unsigned short keymapsize; /* Keymap size */
bool repeat; /* Enable key repeat */
- bool en_keylock; /* Enable key lock feature */
- unsigned char unlock_key1; /* Unlock Key 1 */
- unsigned char unlock_key2; /* Unlock Key 2 */
- unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */
+ bool en_keylock; /* Enable key lock feature (ADP5589 only)*/
+ unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */
+ unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */
+ unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */
unsigned char scan_cycle_time; /* Time between consecutive scan cycles */
unsigned char reset_cfg; /* Reset config */
unsigned short reset1_key_1; /* Reset Key 1 */
diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h
index df00d99..57e01a7 100644
--- a/include/linux/input/adxl34x.h
+++ b/include/linux/input/adxl34x.h
@@ -30,8 +30,9 @@
* Y, or Z participation in Tap detection. A '0' excludes the
* selected axis from participation in Tap detection.
* Setting the SUPPRESS bit suppresses Double Tap detection if
- * acceleration greater than tap_threshold is present between
- * taps.
+ * acceleration greater than tap_threshold is present during the
+ * tap_latency period, i.e. after the first tap but before the
+ * opening of the second tap window.
*/
#define ADXL_SUPPRESS (1 << 3)
@@ -226,13 +227,13 @@
* detection will begin and prevent the detection of activity. This
* bit serially links the activity and inactivity functions. When '0'
* the inactivity and activity functions are concurrent. Additional
- * information can be found in the Application section under Link
- * Mode.
+ * information can be found in the ADXL34x datasheet's Application
+ * section under Link Mode.
* AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode
* when inactivity (acceleration has been below inactivity_threshold
* for at least inactivity_time) is detected and the LINK bit is set.
- * A '0' disables automatic switching to Sleep Mode. See SLEEP
- * for further description.
+ * A '0' disables automatic switching to Sleep Mode. See the
+ * Sleep Bit section of the ADXL34x datasheet for more information.
*/
#define ADXL_LINK (1 << 5)
@@ -266,6 +267,12 @@
u8 watermark;
+ /*
+ * When acceleration measurements are received from the ADXL34x
+ * events are sent to the event subsystem. The following settings
+ * select the event type and event code for new x, y and z axis data
+ * respectively.
+ */
u32 ev_type; /* EV_ABS or EV_REL */
u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */
@@ -289,7 +296,7 @@
u32 ev_code_act_inactivity; /* EV_KEY */
/*
- * Use ADXL34x INT2 instead of INT1
+ * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output
*/
u8 use_int2;
diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h
index c81ed2a..e44e84f 100644
--- a/include/linux/io-mapping.h
+++ b/include/linux/io-mapping.h
@@ -117,6 +117,8 @@
#else
+#include <linux/uaccess.h>
+
/* this struct isn't actually defined anywhere */
struct io_mapping;
@@ -138,12 +140,14 @@
io_mapping_map_atomic_wc(struct io_mapping *mapping,
unsigned long offset)
{
+ pagefault_disable();
return ((char __force __iomem *) mapping) + offset;
}
static inline void
io_mapping_unmap_atomic(void __iomem *vaddr)
{
+ pagefault_enable();
}
/* Non-atomic map/unmap */
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 9940319..432acc4 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -25,15 +25,29 @@
#define IOMMU_WRITE (2)
#define IOMMU_CACHE (4) /* DMA cache coherency */
+struct iommu_ops;
+struct bus_type;
struct device;
+struct iommu_domain;
+
+/* iommu fault flags */
+#define IOMMU_FAULT_READ 0x0
+#define IOMMU_FAULT_WRITE 0x1
+
+typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
+ struct device *, unsigned long, int);
struct iommu_domain {
+ struct iommu_ops *ops;
void *priv;
+ iommu_fault_handler_t handler;
};
#define IOMMU_CAP_CACHE_COHERENCY 0x1
#define IOMMU_CAP_INTR_REMAP 0x2 /* isolates device intrs */
+#ifdef CONFIG_IOMMU_API
+
struct iommu_ops {
int (*domain_init)(struct iommu_domain *domain);
void (*domain_destroy)(struct iommu_domain *domain);
@@ -49,11 +63,9 @@
unsigned long cap);
};
-#ifdef CONFIG_IOMMU_API
-
-extern void register_iommu(struct iommu_ops *ops);
-extern bool iommu_found(void);
-extern struct iommu_domain *iommu_domain_alloc(void);
+extern int bus_set_iommu(struct bus_type *bus, struct iommu_ops *ops);
+extern bool iommu_present(struct bus_type *bus);
+extern struct iommu_domain *iommu_domain_alloc(struct bus_type *bus);
extern void iommu_domain_free(struct iommu_domain *domain);
extern int iommu_attach_device(struct iommu_domain *domain,
struct device *dev);
@@ -67,19 +79,58 @@
unsigned long iova);
extern int iommu_domain_has_cap(struct iommu_domain *domain,
unsigned long cap);
+extern void iommu_set_fault_handler(struct iommu_domain *domain,
+ iommu_fault_handler_t handler);
+
+/**
+ * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework
+ * @domain: the iommu domain where the fault has happened
+ * @dev: the device where the fault has happened
+ * @iova: the faulting address
+ * @flags: mmu fault flags (e.g. IOMMU_FAULT_READ/IOMMU_FAULT_WRITE/...)
+ *
+ * This function should be called by the low-level IOMMU implementations
+ * whenever IOMMU faults happen, to allow high-level users, that are
+ * interested in such events, to know about them.
+ *
+ * This event may be useful for several possible use cases:
+ * - mere logging of the event
+ * - dynamic TLB/PTE loading
+ * - if restarting of the faulting device is required
+ *
+ * Returns 0 on success and an appropriate error code otherwise (if dynamic
+ * PTE/TLB loading will one day be supported, implementations will be able
+ * to tell whether it succeeded or not according to this return value).
+ *
+ * Specifically, -ENOSYS is returned if a fault handler isn't installed
+ * (though fault handlers can also return -ENOSYS, in case they want to
+ * elicit the default behavior of the IOMMU drivers).
+ */
+static inline int report_iommu_fault(struct iommu_domain *domain,
+ struct device *dev, unsigned long iova, int flags)
+{
+ int ret = -ENOSYS;
+
+ /*
+ * if upper layers showed interest and installed a fault handler,
+ * invoke it.
+ */
+ if (domain->handler)
+ ret = domain->handler(domain, dev, iova, flags);
+
+ return ret;
+}
#else /* CONFIG_IOMMU_API */
-static inline void register_iommu(struct iommu_ops *ops)
-{
-}
+struct iommu_ops {};
-static inline bool iommu_found(void)
+static inline bool iommu_present(struct bus_type *bus)
{
return false;
}
-static inline struct iommu_domain *iommu_domain_alloc(void)
+static inline struct iommu_domain *iommu_domain_alloc(struct bus_type *bus)
{
return NULL;
}
@@ -123,6 +174,11 @@
return 0;
}
+static inline void iommu_set_fault_handler(struct iommu_domain *domain,
+ iommu_fault_handler_t handler)
+{
+}
+
#endif /* CONFIG_IOMMU_API */
#endif /* __LINUX_IOMMU_H */
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 3ad553e..99834e58 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -47,6 +47,7 @@
* of the irq_domain is responsible for allocating the array of
* irq_desc structures.
* @nr_irq: Number of irqs managed by the irq domain
+ * @hwirq_base: Starting number for hwirqs managed by the irq domain
* @ops: pointer to irq_domain methods
* @priv: private data pointer for use by owner. Not touched by irq_domain
* core code.
@@ -57,6 +58,7 @@
struct list_head list;
unsigned int irq_base;
unsigned int nr_irq;
+ unsigned int hwirq_base;
const struct irq_domain_ops *ops;
void *priv;
struct device_node *of_node;
@@ -72,9 +74,21 @@
static inline unsigned int irq_domain_to_irq(struct irq_domain *d,
unsigned long hwirq)
{
- return d->ops->to_irq ? d->ops->to_irq(d, hwirq) : d->irq_base + hwirq;
+ if (d->ops->to_irq)
+ return d->ops->to_irq(d, hwirq);
+ if (WARN_ON(hwirq < d->hwirq_base))
+ return 0;
+ return d->irq_base + hwirq - d->hwirq_base;
}
+#define irq_domain_for_each_hwirq(d, hw) \
+ for (hw = d->hwirq_base; hw < d->hwirq_base + d->nr_irq; hw++)
+
+#define irq_domain_for_each_irq(d, hw, irq) \
+ for (hw = d->hwirq_base, irq = irq_domain_to_irq(d, hw); \
+ hw < d->hwirq_base + d->nr_irq; \
+ hw++, irq = irq_domain_to_irq(d, hw))
+
extern void irq_domain_add(struct irq_domain *domain);
extern void irq_domain_del(struct irq_domain *domain);
#endif /* CONFIG_IRQ_DOMAIN */
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index e6a5e34..c7acdde 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -244,6 +244,7 @@
#include <linux/fs.h>
#include <linux/sched.h>
+#include <linux/jbd_common.h>
#define J_ASSERT(assert) BUG_ON(!(assert))
@@ -270,69 +271,6 @@
#define J_EXPECT_JH(jh, expr, why...) __journal_expect(expr, ## why)
#endif
-enum jbd_state_bits {
- BH_JBD /* Has an attached ext3 journal_head */
- = BH_PrivateStart,
- BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
- BH_Freed, /* Has been freed (truncated) */
- BH_Revoked, /* Has been revoked from the log */
- BH_RevokeValid, /* Revoked flag is valid */
- BH_JBDDirty, /* Is dirty but journaled */
- BH_State, /* Pins most journal_head state */
- BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
- BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
-};
-
-BUFFER_FNS(JBD, jbd)
-BUFFER_FNS(JWrite, jwrite)
-BUFFER_FNS(JBDDirty, jbddirty)
-TAS_BUFFER_FNS(JBDDirty, jbddirty)
-BUFFER_FNS(Revoked, revoked)
-TAS_BUFFER_FNS(Revoked, revoked)
-BUFFER_FNS(RevokeValid, revokevalid)
-TAS_BUFFER_FNS(RevokeValid, revokevalid)
-BUFFER_FNS(Freed, freed)
-
-static inline struct buffer_head *jh2bh(struct journal_head *jh)
-{
- return jh->b_bh;
-}
-
-static inline struct journal_head *bh2jh(struct buffer_head *bh)
-{
- return bh->b_private;
-}
-
-static inline void jbd_lock_bh_state(struct buffer_head *bh)
-{
- bit_spin_lock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_trylock_bh_state(struct buffer_head *bh)
-{
- return bit_spin_trylock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
-{
- return bit_spin_is_locked(BH_State, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_state(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_State, &bh->b_state);
-}
-
-static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_lock(BH_JournalHead, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_JournalHead, &bh->b_state);
-}
-
struct jbd_revoke_table_s;
/**
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 38f307b..2092ea2 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -275,6 +275,7 @@
#include <linux/fs.h>
#include <linux/sched.h>
+#include <linux/jbd_common.h>
#define J_ASSERT(assert) BUG_ON(!(assert))
@@ -302,70 +303,6 @@
#define J_EXPECT_JH(jh, expr, why...) __journal_expect(expr, ## why)
#endif
-enum jbd_state_bits {
- BH_JBD /* Has an attached ext3 journal_head */
- = BH_PrivateStart,
- BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
- BH_Freed, /* Has been freed (truncated) */
- BH_Revoked, /* Has been revoked from the log */
- BH_RevokeValid, /* Revoked flag is valid */
- BH_JBDDirty, /* Is dirty but journaled */
- BH_State, /* Pins most journal_head state */
- BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
- BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
- BH_JBDPrivateStart, /* First bit available for private use by FS */
-};
-
-BUFFER_FNS(JBD, jbd)
-BUFFER_FNS(JWrite, jwrite)
-BUFFER_FNS(JBDDirty, jbddirty)
-TAS_BUFFER_FNS(JBDDirty, jbddirty)
-BUFFER_FNS(Revoked, revoked)
-TAS_BUFFER_FNS(Revoked, revoked)
-BUFFER_FNS(RevokeValid, revokevalid)
-TAS_BUFFER_FNS(RevokeValid, revokevalid)
-BUFFER_FNS(Freed, freed)
-
-static inline struct buffer_head *jh2bh(struct journal_head *jh)
-{
- return jh->b_bh;
-}
-
-static inline struct journal_head *bh2jh(struct buffer_head *bh)
-{
- return bh->b_private;
-}
-
-static inline void jbd_lock_bh_state(struct buffer_head *bh)
-{
- bit_spin_lock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_trylock_bh_state(struct buffer_head *bh)
-{
- return bit_spin_trylock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
-{
- return bit_spin_is_locked(BH_State, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_state(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_State, &bh->b_state);
-}
-
-static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_lock(BH_JournalHead, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_JournalHead, &bh->b_state);
-}
-
/* Flags in jbd_inode->i_flags */
#define __JI_COMMIT_RUNNING 0
/* Commit of the inode data in progress. We use this flag to protect us from
@@ -1106,9 +1043,9 @@
*/
extern handle_t *jbd2_journal_start(journal_t *, int nblocks);
-extern handle_t *jbd2__journal_start(journal_t *, int nblocks, int gfp_mask);
+extern handle_t *jbd2__journal_start(journal_t *, int nblocks, gfp_t gfp_mask);
extern int jbd2_journal_restart(handle_t *, int nblocks);
-extern int jbd2__journal_restart(handle_t *, int nblocks, int gfp_mask);
+extern int jbd2__journal_restart(handle_t *, int nblocks, gfp_t gfp_mask);
extern int jbd2_journal_extend (handle_t *, int nblocks);
extern int jbd2_journal_get_write_access(handle_t *, struct buffer_head *);
extern int jbd2_journal_get_create_access (handle_t *, struct buffer_head *);
diff --git a/include/linux/jbd_common.h b/include/linux/jbd_common.h
new file mode 100644
index 0000000..6230f85
--- /dev/null
+++ b/include/linux/jbd_common.h
@@ -0,0 +1,68 @@
+#ifndef _LINUX_JBD_STATE_H
+#define _LINUX_JBD_STATE_H
+
+enum jbd_state_bits {
+ BH_JBD /* Has an attached ext3 journal_head */
+ = BH_PrivateStart,
+ BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
+ BH_Freed, /* Has been freed (truncated) */
+ BH_Revoked, /* Has been revoked from the log */
+ BH_RevokeValid, /* Revoked flag is valid */
+ BH_JBDDirty, /* Is dirty but journaled */
+ BH_State, /* Pins most journal_head state */
+ BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
+ BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
+ BH_JBDPrivateStart, /* First bit available for private use by FS */
+};
+
+BUFFER_FNS(JBD, jbd)
+BUFFER_FNS(JWrite, jwrite)
+BUFFER_FNS(JBDDirty, jbddirty)
+TAS_BUFFER_FNS(JBDDirty, jbddirty)
+BUFFER_FNS(Revoked, revoked)
+TAS_BUFFER_FNS(Revoked, revoked)
+BUFFER_FNS(RevokeValid, revokevalid)
+TAS_BUFFER_FNS(RevokeValid, revokevalid)
+BUFFER_FNS(Freed, freed)
+
+static inline struct buffer_head *jh2bh(struct journal_head *jh)
+{
+ return jh->b_bh;
+}
+
+static inline struct journal_head *bh2jh(struct buffer_head *bh)
+{
+ return bh->b_private;
+}
+
+static inline void jbd_lock_bh_state(struct buffer_head *bh)
+{
+ bit_spin_lock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_trylock_bh_state(struct buffer_head *bh)
+{
+ return bit_spin_trylock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
+{
+ return bit_spin_is_locked(BH_State, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_state(struct buffer_head *bh)
+{
+ bit_spin_unlock(BH_State, &bh->b_state);
+}
+
+static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
+{
+ bit_spin_lock(BH_JournalHead, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
+{
+ bit_spin_unlock(BH_JournalHead, &bh->b_state);
+}
+
+#endif
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 0df513b..3875719 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -101,9 +101,8 @@
#endif /*CONFIG_KALLSYMS*/
/* This macro allows us to keep printk typechecking */
-static void __check_printsym_format(const char *fmt, ...)
-__attribute__((format(printf,1,2)));
-static inline void __check_printsym_format(const char *fmt, ...)
+static __printf(1, 2)
+void __check_printsym_format(const char *fmt, ...)
{
}
diff --git a/include/linux/kdb.h b/include/linux/kdb.h
index 529d9a0..0647258 100644
--- a/include/linux/kdb.h
+++ b/include/linux/kdb.h
@@ -114,12 +114,9 @@
} kdb_reason_t;
extern int kdb_trap_printk;
-extern int vkdb_printf(const char *fmt, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-extern int kdb_printf(const char *, ...)
- __attribute__ ((format (printf, 1, 2)));
-typedef int (*kdb_printf_t)(const char *, ...)
- __attribute__ ((format (printf, 1, 2)));
+extern __printf(1, 0) int vkdb_printf(const char *fmt, va_list args);
+extern __printf(1, 2) int kdb_printf(const char *, ...);
+typedef __printf(1, 2) int (*kdb_printf_t)(const char *, ...);
extern void kdb_init(int level);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 8eefcf7..4c0d3b2 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -287,6 +287,8 @@
return kstrtoint_from_user(s, count, base, res);
}
+/* Obsolete, do not use. Use kstrto<foo> instead */
+
extern unsigned long simple_strtoul(const char *,char **,unsigned int);
extern long simple_strtol(const char *,char **,unsigned int);
extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
@@ -296,20 +298,20 @@
#define strict_strtoull kstrtoull
#define strict_strtoll kstrtoll
-extern int sprintf(char * buf, const char * fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int vsprintf(char *buf, const char *, va_list)
- __attribute__ ((format (printf, 2, 0)));
-extern int snprintf(char * buf, size_t size, const char * fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
- __attribute__ ((format (printf, 3, 0)));
-extern int scnprintf(char * buf, size_t size, const char * fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern int vscnprintf(char *buf, size_t size, const char *fmt, va_list args)
- __attribute__ ((format (printf, 3, 0)));
-extern char *kasprintf(gfp_t gfp, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+/* lib/printf utilities */
+
+extern __printf(2, 3) int sprintf(char *buf, const char * fmt, ...);
+extern __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
+extern __printf(3, 4)
+int snprintf(char *buf, size_t size, const char *fmt, ...);
+extern __printf(3, 0)
+int vsnprintf(char *buf, size_t size, const char *fmt, va_list args);
+extern __printf(3, 4)
+int scnprintf(char *buf, size_t size, const char *fmt, ...);
+extern __printf(3, 0)
+int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
+extern __printf(2, 3)
+char *kasprintf(gfp_t gfp, const char *fmt, ...);
extern char *kvasprintf(gfp_t gfp, const char *fmt, va_list args);
extern int sscanf(const char *, const char *, ...)
@@ -374,13 +376,18 @@
#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
-static inline char *pack_hex_byte(char *buf, u8 byte)
+static inline char *hex_byte_pack(char *buf, u8 byte)
{
*buf++ = hex_asc_hi(byte);
*buf++ = hex_asc_lo(byte);
return buf;
}
+static inline char * __deprecated pack_hex_byte(char *buf, u8 byte)
+{
+ return hex_byte_pack(buf, byte);
+}
+
extern int hex_to_bin(char ch);
extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
@@ -427,8 +434,8 @@
extern void tracing_stop(void);
extern void ftrace_off_permanent(void);
-static inline void __attribute__ ((format (printf, 1, 2)))
-____trace_printk_check_format(const char *fmt, ...)
+static inline __printf(1, 2)
+void ____trace_printk_check_format(const char *fmt, ...)
{
}
#define __trace_printk_check_format(fmt, args...) \
@@ -467,13 +474,11 @@
__trace_printk(_THIS_IP_, fmt, ##args); \
} while (0)
-extern int
-__trace_bprintk(unsigned long ip, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+int __trace_bprintk(unsigned long ip, const char *fmt, ...);
-extern int
-__trace_printk(unsigned long ip, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+int __trace_printk(unsigned long ip, const char *fmt, ...);
extern void trace_dump_stack(void);
@@ -502,8 +507,8 @@
extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode);
#else
-static inline int
-trace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
+static inline __printf(1, 2)
+int trace_printk(const char *fmt, ...);
static inline void tracing_start(void) { }
static inline void tracing_stop(void) { }
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index c2478a3..2fa09012 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -33,6 +33,14 @@
#error KEXEC_ARCH not defined
#endif
+#ifndef KEXEC_CRASH_CONTROL_MEMORY_LIMIT
+#define KEXEC_CRASH_CONTROL_MEMORY_LIMIT KEXEC_CONTROL_MEMORY_LIMIT
+#endif
+
+#ifndef KEXEC_CRASH_MEM_ALIGN
+#define KEXEC_CRASH_MEM_ALIGN PAGE_SIZE
+#endif
+
#define KEXEC_NOTE_HEAD_BYTES ALIGN(sizeof(struct elf_note), 4)
#define KEXEC_CORE_NOTE_NAME "CORE"
#define KEXEC_CORE_NOTE_NAME_BYTES ALIGN(sizeof(KEXEC_CORE_NOTE_NAME), 4)
@@ -129,9 +137,11 @@
int kexec_should_crash(struct task_struct *);
void crash_save_cpu(struct pt_regs *regs, int cpu);
void crash_save_vmcoreinfo(void);
+void crash_map_reserved_pages(void);
+void crash_unmap_reserved_pages(void);
void arch_crash_save_vmcoreinfo(void);
-void vmcoreinfo_append_str(const char *fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
+__printf(1, 2)
+void vmcoreinfo_append_str(const char *fmt, ...);
unsigned long paddr_vmcoreinfo_note(void);
#define VMCOREINFO_OSRELEASE(value) \
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 0da38cf..b16f6539 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -32,8 +32,8 @@
extern char modprobe_path[]; /* for sysctl */
/* modprobe exit status on success, -ve on error. Return value
* usually useless though. */
-extern int __request_module(bool wait, const char *name, ...) \
- __attribute__((format(printf, 2, 3)));
+extern __printf(2, 3)
+int __request_module(bool wait, const char *name, ...);
#define request_module(mod...) __request_module(true, mod)
#define request_module_nowait(mod...) __request_module(false, mod)
#define try_then_request_module(x, mod...) \
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 668729c..ad81e1c 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -72,8 +72,8 @@
unsigned int uevent_suppress:1;
};
-extern int kobject_set_name(struct kobject *kobj, const char *name, ...)
- __attribute__((format(printf, 2, 3)));
+extern __printf(2, 3)
+int kobject_set_name(struct kobject *kobj, const char *name, ...);
extern int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
va_list vargs);
@@ -83,15 +83,13 @@
}
extern void kobject_init(struct kobject *kobj, struct kobj_type *ktype);
-extern int __must_check kobject_add(struct kobject *kobj,
- struct kobject *parent,
- const char *fmt, ...)
- __attribute__((format(printf, 3, 4)));
-extern int __must_check kobject_init_and_add(struct kobject *kobj,
- struct kobj_type *ktype,
- struct kobject *parent,
- const char *fmt, ...)
- __attribute__((format(printf, 4, 5)));
+extern __printf(3, 4) __must_check
+int kobject_add(struct kobject *kobj, struct kobject *parent,
+ const char *fmt, ...);
+extern __printf(4, 5) __must_check
+int kobject_init_and_add(struct kobject *kobj,
+ struct kobj_type *ktype, struct kobject *parent,
+ const char *fmt, ...);
extern void kobject_del(struct kobject *kobj);
@@ -212,8 +210,8 @@
int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp[]);
-int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
- __attribute__((format (printf, 2, 3)));
+__printf(2, 3)
+int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
int kobject_action_type(const char *buf, size_t count,
enum kobject_action *type);
@@ -226,7 +224,7 @@
char *envp[])
{ return 0; }
-static inline __attribute__((format(printf, 2, 3)))
+static inline __printf(2, 3)
int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
{ return 0; }
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 1e923e5..5cac19b 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -4,11 +4,11 @@
#include <linux/err.h>
#include <linux/sched.h>
+__printf(4, 5)
struct task_struct *kthread_create_on_node(int (*threadfn)(void *data),
void *data,
int node,
- const char namefmt[], ...)
- __attribute__((format(printf, 4, 5)));
+ const char namefmt[], ...);
#define kthread_create(threadfn, data, namefmt, arg...) \
kthread_create_on_node(threadfn, data, -1, namefmt, ##arg)
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index aace6b8..f47fcd3 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -371,6 +371,7 @@
#define KVM_S390_INT_VIRTIO 0xffff2603u
#define KVM_S390_INT_SERVICE 0xffff2401u
#define KVM_S390_INT_EMERGENCY 0xffff1201u
+#define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u
struct kvm_s390_interrupt {
__u32 type;
@@ -463,7 +464,7 @@
#define KVM_CAP_VAPIC 6
#define KVM_CAP_EXT_CPUID 7
#define KVM_CAP_CLOCKSOURCE 8
-#define KVM_CAP_NR_VCPUS 9 /* returns max vcpus per vm */
+#define KVM_CAP_NR_VCPUS 9 /* returns recommended max vcpus per vm */
#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */
#define KVM_CAP_PIT 11
#define KVM_CAP_NOP_IO_DELAY 12
@@ -553,6 +554,9 @@
#define KVM_CAP_SPAPR_TCE 63
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
+#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
+#define KVM_CAP_PPC_HIOR 67
+#define KVM_CAP_PPC_PAPR 68
#define KVM_CAP_S390_GMAP 71
#ifdef KVM_CAP_IRQ_ROUTING
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index eabb21a..d526231 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -18,6 +18,7 @@
#include <linux/msi.h>
#include <linux/slab.h>
#include <linux/rcupdate.h>
+#include <linux/ratelimit.h>
#include <asm/signal.h>
#include <linux/kvm.h>
@@ -48,6 +49,7 @@
#define KVM_REQ_EVENT 11
#define KVM_REQ_APF_HALT 12
#define KVM_REQ_STEAL_UPDATE 13
+#define KVM_REQ_NMI 14
#define KVM_USERSPACE_IRQ_SOURCE_ID 0
@@ -55,16 +57,16 @@
struct kvm_vcpu;
extern struct kmem_cache *kvm_vcpu_cache;
-/*
- * It would be nice to use something smarter than a linear search, TBD...
- * Thankfully we dont expect many devices to register (famous last words :),
- * so until then it will suffice. At least its abstracted so we can change
- * in one place.
- */
+struct kvm_io_range {
+ gpa_t addr;
+ int len;
+ struct kvm_io_device *dev;
+};
+
struct kvm_io_bus {
int dev_count;
-#define NR_IOBUS_DEVS 200
- struct kvm_io_device *devs[NR_IOBUS_DEVS];
+#define NR_IOBUS_DEVS 300
+ struct kvm_io_range range[NR_IOBUS_DEVS];
};
enum kvm_bus {
@@ -77,8 +79,8 @@
int len, const void *val);
int kvm_io_bus_read(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr, int len,
void *val);
-int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx,
- struct kvm_io_device *dev);
+int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
+ int len, struct kvm_io_device *dev);
int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
struct kvm_io_device *dev);
@@ -256,8 +258,9 @@
struct kvm_arch arch;
atomic_t users_count;
#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
- struct kvm_coalesced_mmio_dev *coalesced_mmio_dev;
struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
+ spinlock_t ring_lock;
+ struct list_head coalesced_zones;
#endif
struct mutex irq_lock;
@@ -281,11 +284,8 @@
/* The guest did something we don't support. */
#define pr_unimpl(vcpu, fmt, ...) \
- do { \
- if (printk_ratelimit()) \
- printk(KERN_ERR "kvm: %i: cpu%i " fmt, \
- current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__); \
- } while (0)
+ pr_err_ratelimited("kvm: %i: cpu%i " fmt, \
+ current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__)
#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt)
#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index efd6f98..cafc09a 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1052,6 +1052,8 @@
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth, int reason);
+extern int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+ int queue_depth, int reason);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
@@ -1254,13 +1256,13 @@
/*
* printk helpers
*/
-__attribute__((format (printf, 3, 4)))
+__printf(3, 4)
int ata_port_printk(const struct ata_port *ap, const char *level,
const char *fmt, ...);
-__attribute__((format (printf, 3, 4)))
+__printf(3, 4)
int ata_link_printk(const struct ata_link *link, const char *level,
const char *fmt, ...);
-__attribute__((format (printf, 3, 4)))
+__printf(3, 4)
int ata_dev_printk(const struct ata_device *dev, const char *level,
const char *fmt, ...);
@@ -1302,10 +1304,10 @@
/*
* ata_eh_info helpers
*/
-extern void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
+extern __printf(2, 3)
+void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
extern void ata_ehi_clear_desc(struct ata_eh_info *ehi);
static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
@@ -1319,8 +1321,8 @@
/*
* port description helpers
*/
-extern void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+void ata_port_desc(struct ata_port *ap, const char *fmt, ...);
#ifdef CONFIG_PCI
extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
const char *name);
diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
index d4292c8..f1664c6 100644
--- a/include/linux/lis3lv02d.h
+++ b/include/linux/lis3lv02d.h
@@ -113,7 +113,6 @@
s8 axis_x;
s8 axis_y;
s8 axis_z;
-#define LIS3_USE_REGULATOR_CTRL 0x01
#define LIS3_USE_BLOCK_READ 0x02
u16 driver_features;
int default_rate;
diff --git a/include/linux/llist.h b/include/linux/llist.h
index 7287734..801b44b 100644
--- a/include/linux/llist.h
+++ b/include/linux/llist.h
@@ -148,7 +148,7 @@
* @new: new entry to be added
* @head: the head for your lock-less list
*
- * Return whether list is empty before adding.
+ * Returns true if the list was empty prior to adding this entry.
*/
static inline bool llist_add(struct llist_node *new, struct llist_head *head)
{
diff --git a/include/linux/magic.h b/include/linux/magic.h
index 1e5df2af..2d4beab 100644
--- a/include/linux/magic.h
+++ b/include/linux/magic.h
@@ -30,11 +30,11 @@
#define ANON_INODE_FS_MAGIC 0x09041934
#define PSTOREFS_MAGIC 0x6165676C
-#define MINIX_SUPER_MAGIC 0x137F /* original minix fs */
-#define MINIX_SUPER_MAGIC2 0x138F /* minix fs, 30 char names */
-#define MINIX2_SUPER_MAGIC 0x2468 /* minix V2 fs */
-#define MINIX2_SUPER_MAGIC2 0x2478 /* minix V2 fs, 30 char names */
-#define MINIX3_SUPER_MAGIC 0x4d5a /* minix V3 fs */
+#define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */
+#define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */
+#define MINIX2_SUPER_MAGIC 0x2468 /* minix v2 fs, 14 char names */
+#define MINIX2_SUPER_MAGIC2 0x2478 /* minix v2 fs, 30 char names */
+#define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */
#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */
#define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 7525e38..e6b843e 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -80,6 +80,7 @@
phys_addr_t align,
phys_addr_t max_addr);
extern phys_addr_t memblock_phys_mem_size(void);
+extern phys_addr_t memblock_start_of_DRAM(void);
extern phys_addr_t memblock_end_of_DRAM(void);
extern void memblock_enforce_memory_limit(phys_addr_t memory_limit);
extern int memblock_is_memory(phys_addr_t addr);
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 343bd76..b87068a 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -35,7 +35,8 @@
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
struct list_head *dst,
unsigned long *scanned, int order,
- int mode, struct zone *z,
+ isolate_mode_t mode,
+ struct zone *z,
struct mem_cgroup *mem_cont,
int active, int file);
@@ -77,8 +78,8 @@
extern void mem_cgroup_uncharge_page(struct page *page);
extern void mem_cgroup_uncharge_cache_page(struct page *page);
-extern void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask);
-int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem);
+extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask);
+int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg);
extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page);
extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
@@ -87,26 +88,28 @@
static inline
int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
rcu_read_lock();
- mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
+ memcg = mem_cgroup_from_task(rcu_dereference((mm)->owner));
rcu_read_unlock();
- return cgroup == mem;
+ return cgroup == memcg;
}
-extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *mem);
+extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg);
extern int
mem_cgroup_prepare_migration(struct page *page,
struct page *newpage, struct mem_cgroup **ptr, gfp_t gfp_mask);
-extern void mem_cgroup_end_migration(struct mem_cgroup *mem,
+extern void mem_cgroup_end_migration(struct mem_cgroup *memcg,
struct page *oldpage, struct page *newpage, bool migration_ok);
/*
* For memory reclaim.
*/
-int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg);
-int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg);
+int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg,
+ struct zone *zone);
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg,
+ struct zone *zone);
int mem_cgroup_select_victim_node(struct mem_cgroup *memcg);
unsigned long mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg,
int nid, int zid, unsigned int lrumask);
@@ -147,7 +150,7 @@
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
gfp_t gfp_mask,
unsigned long *total_scanned);
-u64 mem_cgroup_get_limit(struct mem_cgroup *mem);
+u64 mem_cgroup_get_limit(struct mem_cgroup *memcg);
void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx);
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -243,18 +246,20 @@
return NULL;
}
-static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
+static inline int mm_match_cgroup(struct mm_struct *mm,
+ struct mem_cgroup *memcg)
{
return 1;
}
static inline int task_in_mem_cgroup(struct task_struct *task,
- const struct mem_cgroup *mem)
+ const struct mem_cgroup *memcg)
{
return 1;
}
-static inline struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *mem)
+static inline struct cgroup_subsys_state
+ *mem_cgroup_css(struct mem_cgroup *memcg)
{
return NULL;
}
@@ -266,22 +271,22 @@
return 0;
}
-static inline void mem_cgroup_end_migration(struct mem_cgroup *mem,
+static inline void mem_cgroup_end_migration(struct mem_cgroup *memcg,
struct page *oldpage, struct page *newpage, bool migration_ok)
{
}
-static inline int mem_cgroup_get_reclaim_priority(struct mem_cgroup *mem)
+static inline int mem_cgroup_get_reclaim_priority(struct mem_cgroup *memcg)
{
return 0;
}
-static inline void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem,
+static inline void mem_cgroup_note_reclaim_priority(struct mem_cgroup *memcg,
int priority)
{
}
-static inline void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem,
+static inline void mem_cgroup_record_reclaim_priority(struct mem_cgroup *memcg,
int priority)
{
}
@@ -292,13 +297,13 @@
}
static inline int
-mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
+mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
return 1;
}
static inline int
-mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
+mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
return 1;
}
@@ -347,7 +352,7 @@
}
static inline
-u64 mem_cgroup_get_limit(struct mem_cgroup *mem)
+u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
{
return 0;
}
diff --git a/include/linux/mfd/ab5500/ab5500.h b/include/linux/mfd/ab5500/ab5500.h
new file mode 100644
index 0000000..a720051
--- /dev/null
+++ b/include/linux/mfd/ab5500/ab5500.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) ST-Ericsson 2011
+ *
+ * License Terms: GNU General Public License v2
+ */
+#ifndef MFD_AB5500_H
+#define MFD_AB5500_H
+
+#include <linux/device.h>
+
+enum ab5500_devid {
+ AB5500_DEVID_ADC,
+ AB5500_DEVID_LEDS,
+ AB5500_DEVID_POWER,
+ AB5500_DEVID_REGULATORS,
+ AB5500_DEVID_SIM,
+ AB5500_DEVID_RTC,
+ AB5500_DEVID_CHARGER,
+ AB5500_DEVID_FUELGAUGE,
+ AB5500_DEVID_VIBRATOR,
+ AB5500_DEVID_CODEC,
+ AB5500_DEVID_USB,
+ AB5500_DEVID_OTP,
+ AB5500_DEVID_VIDEO,
+ AB5500_DEVID_DBIECI,
+ AB5500_DEVID_ONSWA,
+ AB5500_NUM_DEVICES,
+};
+
+enum ab5500_banks {
+ AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
+ AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
+ AB5500_BANK_VDENC = 2,
+ AB5500_BANK_SIM_USBSIM = 3,
+ AB5500_BANK_LED = 4,
+ AB5500_BANK_ADC = 5,
+ AB5500_BANK_RTC = 6,
+ AB5500_BANK_STARTUP = 7,
+ AB5500_BANK_DBI_ECI = 8,
+ AB5500_BANK_CHG = 9,
+ AB5500_BANK_FG_BATTCOM_ACC = 10,
+ AB5500_BANK_USB = 11,
+ AB5500_BANK_IT = 12,
+ AB5500_BANK_VIBRA = 13,
+ AB5500_BANK_AUDIO_HEADSETUSB = 14,
+ AB5500_NUM_BANKS = 15,
+};
+
+enum ab5500_banks_addr {
+ AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
+ AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
+ AB5500_ADDR_VDENC = 0x06,
+ AB5500_ADDR_SIM_USBSIM = 0x04,
+ AB5500_ADDR_LED = 0x10,
+ AB5500_ADDR_ADC = 0x0A,
+ AB5500_ADDR_RTC = 0x0F,
+ AB5500_ADDR_STARTUP = 0x03,
+ AB5500_ADDR_DBI_ECI = 0x07,
+ AB5500_ADDR_CHG = 0x0B,
+ AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
+ AB5500_ADDR_USB = 0x05,
+ AB5500_ADDR_IT = 0x0E,
+ AB5500_ADDR_VIBRA = 0x02,
+ AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
+};
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB5500_IT_SOURCE0_REG 0x20
+#define AB5500_IT_SOURCE1_REG 0x21
+#define AB5500_IT_SOURCE2_REG 0x22
+#define AB5500_IT_SOURCE3_REG 0x23
+#define AB5500_IT_SOURCE4_REG 0x24
+#define AB5500_IT_SOURCE5_REG 0x25
+#define AB5500_IT_SOURCE6_REG 0x26
+#define AB5500_IT_SOURCE7_REG 0x27
+#define AB5500_IT_SOURCE8_REG 0x28
+#define AB5500_IT_SOURCE9_REG 0x29
+#define AB5500_IT_SOURCE10_REG 0x2A
+#define AB5500_IT_SOURCE11_REG 0x2B
+#define AB5500_IT_SOURCE12_REG 0x2C
+#define AB5500_IT_SOURCE13_REG 0x2D
+#define AB5500_IT_SOURCE14_REG 0x2E
+#define AB5500_IT_SOURCE15_REG 0x2F
+#define AB5500_IT_SOURCE16_REG 0x30
+#define AB5500_IT_SOURCE17_REG 0x31
+#define AB5500_IT_SOURCE18_REG 0x32
+#define AB5500_IT_SOURCE19_REG 0x33
+#define AB5500_IT_SOURCE20_REG 0x34
+#define AB5500_IT_SOURCE21_REG 0x35
+#define AB5500_IT_SOURCE22_REG 0x36
+#define AB5500_IT_SOURCE23_REG 0x37
+
+#define AB5500_NUM_IRQ_REGS 23
+
+/**
+ * struct ab5500
+ * @access_mutex: lock out concurrent accesses to the AB registers
+ * @dev: a pointer to the device struct for this chip driver
+ * @ab5500_irq: the analog baseband irq
+ * @irq_base: the platform configuration irq base for subdevices
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @irq_lock: a lock to protect the mask
+ * @abb_events: a local bit mask of the prcmu wakeup events
+ * @event_mask: a local copy of the mask event registers
+ * @last_event_mask: a copy of the last event_mask written to hardware
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ */
+struct ab5500 {
+ struct mutex access_mutex;
+ struct device *dev;
+ unsigned int ab5500_irq;
+ unsigned int irq_base;
+ char chip_name[32];
+ u8 chip_id;
+ struct mutex irq_lock;
+ u32 abb_events;
+ u8 mask[AB5500_NUM_IRQ_REGS];
+ u8 oldmask[AB5500_NUM_IRQ_REGS];
+ u8 startup_events[AB5500_NUM_IRQ_REGS];
+ bool startup_events_read;
+#ifdef CONFIG_DEBUG_FS
+ unsigned int debug_bank;
+ unsigned int debug_address;
+#endif
+};
+
+struct ab5500_platform_data {
+ struct {unsigned int base; unsigned int count; } irq;
+ void *dev_data[AB5500_NUM_DEVICES];
+ struct abx500_init_settings *init_settings;
+ unsigned int init_settings_sz;
+ bool pm_power_off;
+};
+
+#endif /* MFD_AB5500_H */
diff --git a/include/linux/mfd/ab8500/gpadc.h b/include/linux/mfd/ab8500/gpadc.h
index 46b9540..2529667 100644
--- a/include/linux/mfd/ab8500/gpadc.h
+++ b/include/linux/mfd/ab8500/gpadc.h
@@ -27,6 +27,9 @@
struct ab8500_gpadc;
struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input);
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+ u8 channel, int ad_value);
#endif /* _AB8500_GPADC_H */
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 896b5e4..9970337 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,7 +6,7 @@
*
* ABX500 core access functions.
* The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab3550, ab5500, and ab8500.
+ * ab3100, ab5500, and ab8500.
*
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
@@ -29,17 +29,16 @@
#define AB3100_P1G 0xc6
#define AB3100_R2A 0xc7
#define AB3100_R2B 0xc8
-#define AB3550_P1A 0x10
#define AB5500_1_0 0x20
-#define AB5500_2_0 0x21
-#define AB5500_2_1 0x22
+#define AB5500_1_1 0x21
+#define AB5500_2_0 0x24
/* AB8500 CIDs*/
-#define AB8500_CUTEARLY 0x00
#define AB8500_CUT1P0 0x10
#define AB8500_CUT1P1 0x11
#define AB8500_CUT2P0 0x20
#define AB8500_CUT3P0 0x30
+#define AB8500_CUT3P3 0x33
/*
* AB3100, EVENTA1, A2 and A3 event register flags
@@ -143,39 +142,6 @@
int ab3100_event_unregister(struct ab3100 *ab3100,
struct notifier_block *nb);
-/* AB3550, STR register flags */
-#define AB3550_STR_ONSWA (0x01)
-#define AB3550_STR_ONSWB (0x02)
-#define AB3550_STR_ONSWC (0x04)
-#define AB3550_STR_DCIO (0x08)
-#define AB3550_STR_BOOT_MODE (0x10)
-#define AB3550_STR_SIM_OFF (0x20)
-#define AB3550_STR_BATT_REMOVAL (0x40)
-#define AB3550_STR_VBUS (0x80)
-
-/* Interrupt mask registers */
-#define AB3550_IMR1 0x29
-#define AB3550_IMR2 0x2a
-#define AB3550_IMR3 0x2b
-#define AB3550_IMR4 0x2c
-#define AB3550_IMR5 0x2d
-
-enum ab3550_devid {
- AB3550_DEVID_ADC,
- AB3550_DEVID_DAC,
- AB3550_DEVID_LEDS,
- AB3550_DEVID_POWER,
- AB3550_DEVID_REGULATORS,
- AB3550_DEVID_SIM,
- AB3550_DEVID_UART,
- AB3550_DEVID_RTC,
- AB3550_DEVID_CHARGER,
- AB3550_DEVID_FUELGAUGE,
- AB3550_DEVID_VIBRATOR,
- AB3550_DEVID_CODEC,
- AB3550_NUM_DEVICES,
-};
-
/**
* struct abx500_init_setting
* Initial value of the registers for driver to use during setup.
@@ -186,18 +152,6 @@
u8 setting;
};
-/**
- * struct ab3550_platform_data
- * Data supplied to initialize board connections to the AB3550
- */
-struct ab3550_platform_data {
- struct {unsigned int base; unsigned int count; } irq;
- void *dev_data[AB3550_NUM_DEVICES];
- size_t dev_data_sz[AB3550_NUM_DEVICES];
- struct abx500_init_settings *init_settings;
- unsigned int init_settings_sz;
-};
-
int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
u8 value);
int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
index f097798..9890687 100644
--- a/include/linux/mfd/db5500-prcmu.h
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -5,21 +5,35 @@
*
* U5500 PRCMU API.
*/
-#ifndef __MACH_PRCMU_U5500_H
-#define __MACH_PRCMU_U5500_H
+#ifndef __MFD_DB5500_PRCMU_H
+#define __MFD_DB5500_PRCMU_H
-#ifdef CONFIG_UX500_SOC_DB5500
+#ifdef CONFIG_MFD_DB5500_PRCMU
void db5500_prcmu_early_init(void);
-
+int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+void db5500_prcmu_enable_wakeups(u32 wakeups);
+int db5500_prcmu_request_clock(u8 clock, bool enable);
+void db5500_prcmu_config_abb_event_readout(u32 abb_events);
+void db5500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int prcmu_resetout(u8 resoutn, u8 state);
+int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll);
+int db5500_prcmu_config_esram0_deep_sleep(u8 state);
+void db5500_prcmu_system_reset(u16 reset_code);
+u16 db5500_prcmu_get_reset_code(void);
+bool db5500_prcmu_is_ac_wake_requested(void);
+int db5500_prcmu_set_arm_opp(u8 opp);
+int db5500_prcmu_get_arm_opp(void);
#else /* !CONFIG_UX500_SOC_DB5500 */
-static inline void db5500_prcmu_early_init(void)
-{
-}
+static inline void db5500_prcmu_early_init(void) {}
static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
{
@@ -31,15 +45,75 @@
return -ENOSYS;
}
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-static inline int db5500_prcmu_config_abb_event_readout(u32 abb_events)
+static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
{
-#ifdef CONFIG_MACH_U5500_SIMULATOR
return 0;
-#else
- return -1;
-#endif
}
-#endif /* __MACH_PRCMU_U5500_H */
+static inline int db5500_prcmu_set_display_clocks(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_disable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int prcmu_resetout(u8 resoutn, u8 state)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ return 0;
+}
+
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ return 0;
+}
+
+static inline void db5500_prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 db5500_prcmu_get_reset_code(void)
+{
+ return 0;
+}
+
+static inline bool db5500_prcmu_is_ac_wake_requested(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_set_arm_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_get_arm_opp(void)
+{
+ return 0;
+}
+
+
+#endif /* CONFIG_MFD_DB5500_PRCMU */
+
+#endif /* __MFD_DB5500_PRCMU_H */
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 917dbcab..60d27f7 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -11,7 +11,6 @@
#define __MFD_DB8500_PRCMU_H
#include <linux/interrupt.h>
-#include <linux/notifier.h>
/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
@@ -133,7 +132,7 @@
* @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
*/
enum ap_pwrst_trans {
- NO_TRANSITION = 0x00,
+ PRCMU_AP_NO_CHANGE = 0x00,
APEXECUTE_TO_APSLEEP = 0x01,
APIDLE_TO_APSLEEP = 0x02, /* To be removed */
PRCMU_AP_SLEEP = 0x01,
@@ -146,54 +145,6 @@
};
/**
- * enum ddr_pwrst - DDR power states definition
- * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
- * @DDR_PWR_STATE_ON:
- * @DDR_PWR_STATE_OFFLOWLAT:
- * @DDR_PWR_STATE_OFFHIGHLAT:
- */
-enum ddr_pwrst {
- DDR_PWR_STATE_UNCHANGED = 0x00,
- DDR_PWR_STATE_ON = 0x01,
- DDR_PWR_STATE_OFFLOWLAT = 0x02,
- DDR_PWR_STATE_OFFHIGHLAT = 0x03
-};
-
-/**
- * enum arm_opp - ARM OPP states definition
- * @ARM_OPP_INIT:
- * @ARM_NO_CHANGE: The ARM operating point is unchanged
- * @ARM_100_OPP: The new ARM operating point is arm100opp
- * @ARM_50_OPP: The new ARM operating point is arm50opp
- * @ARM_MAX_OPP: Operating point is "max" (more than 100)
- * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
- * @ARM_EXTCLK: The new ARM operating point is armExtClk
- */
-enum arm_opp {
- ARM_OPP_INIT = 0x00,
- ARM_NO_CHANGE = 0x01,
- ARM_100_OPP = 0x02,
- ARM_50_OPP = 0x03,
- ARM_MAX_OPP = 0x04,
- ARM_MAX_FREQ100OPP = 0x05,
- ARM_EXTCLK = 0x07
-};
-
-/**
- * enum ape_opp - APE OPP states definition
- * @APE_OPP_INIT:
- * @APE_NO_CHANGE: The APE operating point is unchanged
- * @APE_100_OPP: The new APE operating point is ape100opp
- * @APE_50_OPP: 50%
- */
-enum ape_opp {
- APE_OPP_INIT = 0x00,
- APE_NO_CHANGE = 0x01,
- APE_100_OPP = 0x02,
- APE_50_OPP = 0x03
-};
-
-/**
* enum hw_acc_state - State definition for hardware accelerator
* @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
* @HW_OFF: The hardware accelerator must be switched off
@@ -469,26 +420,6 @@
/* End of file previously known as prcmu-fw-defs_v1.h */
-/* PRCMU Wakeup defines */
-enum prcmu_wakeup_index {
- PRCMU_WAKEUP_INDEX_RTC,
- PRCMU_WAKEUP_INDEX_RTT0,
- PRCMU_WAKEUP_INDEX_RTT1,
- PRCMU_WAKEUP_INDEX_HSI0,
- PRCMU_WAKEUP_INDEX_HSI1,
- PRCMU_WAKEUP_INDEX_USB,
- PRCMU_WAKEUP_INDEX_ABB,
- PRCMU_WAKEUP_INDEX_ABB_FIFO,
- PRCMU_WAKEUP_INDEX_ARM,
- NUM_PRCMU_WAKEUP_INDICES
-};
-#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
-
-/* PRCMU QoS APE OPP class */
-#define PRCMU_QOS_APE_OPP 1
-#define PRCMU_QOS_DDR_OPP 2
-#define PRCMU_QOS_DEFAULT_VALUE -1
-
/**
* enum hw_acc_dev - enum for hw accelerators
* @HW_ACC_SVAMMDSP: for SVAMMDSP
@@ -527,64 +458,6 @@
};
/*
- * Ids for all EPODs (power domains)
- * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
- * - EPOD_ID_SVAPIPE: power domain for SVA pipe
- * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
- * - EPOD_ID_SIAPIPE: power domain for SIA pipe
- * - EPOD_ID_SGA: power domain for SGA
- * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
- * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
- * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
- * - NUM_EPOD_ID: number of power domains
- */
-#define EPOD_ID_SVAMMDSP 0
-#define EPOD_ID_SVAPIPE 1
-#define EPOD_ID_SIAMMDSP 2
-#define EPOD_ID_SIAPIPE 3
-#define EPOD_ID_SGA 4
-#define EPOD_ID_B2R2_MCDE 5
-#define EPOD_ID_ESRAM12 6
-#define EPOD_ID_ESRAM34 7
-#define NUM_EPOD_ID 8
-
-/*
- * state definition for EPOD (power domain)
- * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
- * - EPOD_STATE_OFF: The EPOD is switched off
- * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
- * retention
- * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
- * - EPOD_STATE_ON: Same as above, but with clock enabled
- */
-#define EPOD_STATE_NO_CHANGE 0x00
-#define EPOD_STATE_OFF 0x01
-#define EPOD_STATE_RAMRET 0x02
-#define EPOD_STATE_ON_CLK_OFF 0x03
-#define EPOD_STATE_ON 0x04
-
-/*
- * CLKOUT sources
- */
-#define PRCMU_CLKSRC_CLK38M 0x00
-#define PRCMU_CLKSRC_ACLK 0x01
-#define PRCMU_CLKSRC_SYSCLK 0x02
-#define PRCMU_CLKSRC_LCDCLK 0x03
-#define PRCMU_CLKSRC_SDMMCCLK 0x04
-#define PRCMU_CLKSRC_TVCLK 0x05
-#define PRCMU_CLKSRC_TIMCLK 0x06
-#define PRCMU_CLKSRC_CLK009 0x07
-/* These are only valid for CLKOUT1: */
-#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40
-#define PRCMU_CLKSRC_I2CCLK 0x41
-#define PRCMU_CLKSRC_MSP02CLK 0x42
-#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43
-#define PRCMU_CLKSRC_HSIRXCLK 0x44
-#define PRCMU_CLKSRC_HSITXCLK 0x45
-#define PRCMU_CLKSRC_ARMCLKFIX 0x46
-#define PRCMU_CLKSRC_HDMICLK 0x47
-
-/*
* Definitions for autonomous power management configuration.
*/
@@ -620,88 +493,12 @@
u8 sva_policy;
};
-/**
- * enum ddr_opp - DDR OPP states definition
- * @DDR_100_OPP: The new DDR operating point is ddr100opp
- * @DDR_50_OPP: The new DDR operating point is ddr50opp
- * @DDR_25_OPP: The new DDR operating point is ddr25opp
- */
-enum ddr_opp {
- DDR_100_OPP = 0x00,
- DDR_50_OPP = 0x01,
- DDR_25_OPP = 0x02,
-};
-
-/*
- * Clock identifiers.
- */
-enum prcmu_clock {
- PRCMU_SGACLK,
- PRCMU_UARTCLK,
- PRCMU_MSP02CLK,
- PRCMU_MSP1CLK,
- PRCMU_I2CCLK,
- PRCMU_SDMMCCLK,
- PRCMU_SLIMCLK,
- PRCMU_PER1CLK,
- PRCMU_PER2CLK,
- PRCMU_PER3CLK,
- PRCMU_PER5CLK,
- PRCMU_PER6CLK,
- PRCMU_PER7CLK,
- PRCMU_LCDCLK,
- PRCMU_BMLCLK,
- PRCMU_HSITXCLK,
- PRCMU_HSIRXCLK,
- PRCMU_HDMICLK,
- PRCMU_APEATCLK,
- PRCMU_APETRACECLK,
- PRCMU_MCDECLK,
- PRCMU_IPI2CCLK,
- PRCMU_DSIALTCLK,
- PRCMU_DMACLK,
- PRCMU_B2R2CLK,
- PRCMU_TVCLK,
- PRCMU_SSPCLK,
- PRCMU_RNGCLK,
- PRCMU_UICCCLK,
- PRCMU_NUM_REG_CLOCKS,
- PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
- PRCMU_TIMCLK,
-};
-
-/*
- * Definitions for controlling ESRAM0 in deep sleep.
- */
-#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
-#define ESRAM0_DEEP_SLEEP_STATE_RET 2
-
-#ifdef CONFIG_MFD_DB8500_PRCMU
-void __init prcmu_early_init(void);
-int prcmu_set_display_clocks(void);
-int prcmu_disable_dsipll(void);
-int prcmu_enable_dsipll(void);
-#else
-static inline void __init prcmu_early_init(void) {}
-#endif
-
#ifdef CONFIG_MFD_DB8500_PRCMU
+void db8500_prcmu_early_init(void);
int prcmu_set_rc_a2p(enum romcode_write);
enum romcode_read prcmu_get_rc_p2a(void);
enum ap_pwrst prcmu_get_xp70_current_state(void);
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
-
-void prcmu_enable_wakeups(u32 wakeups);
-static inline void prcmu_disable_wakeups(void)
-{
- prcmu_enable_wakeups(0);
-}
-
-void prcmu_config_abb_event_readout(u32 abb_events);
-void prcmu_get_abb_event_buffer(void __iomem **buf);
-int prcmu_set_arm_opp(u8 opp);
-int prcmu_get_arm_opp(void);
bool prcmu_has_arm_maxopp(void);
bool prcmu_is_u8400(void);
int prcmu_set_ape_opp(u8 opp);
@@ -710,19 +507,14 @@
int prcmu_release_usb_wakeup_state(void);
int prcmu_set_ddr_opp(u8 opp);
int prcmu_get_ddr_opp(void);
-unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
-void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
/* NOTE! Use regulator framework instead */
int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
-int prcmu_set_epod(u16 epod_id, u8 epod_state);
void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
struct prcmu_auto_pm_config *idle);
bool prcmu_is_auto_pm_enabled(void);
int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
-int prcmu_request_clock(u8 clock, bool enable);
int prcmu_set_clock_divider(u8 clock, u8 divider);
-int prcmu_config_esram0_deep_sleep(u8 state);
int prcmu_config_hotdog(u8 threshold);
int prcmu_config_hotmon(u8 low, u8 high);
int prcmu_start_temp_sense(u16 cycles32k);
@@ -732,14 +524,36 @@
void prcmu_ac_wake_req(void);
void prcmu_ac_sleep_req(void);
-void prcmu_system_reset(u16 reset_code);
void prcmu_modem_reset(void);
-bool prcmu_is_ac_wake_requested(void);
void prcmu_enable_spi2(void);
void prcmu_disable_spi2(void);
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int prcmu_enable_a9wdog(u8 id);
+int prcmu_disable_a9wdog(u8 id);
+int prcmu_kick_a9wdog(u8 id);
+int prcmu_load_a9wdog(u8 id, u32 val);
+
+void db8500_prcmu_system_reset(u16 reset_code);
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+void db8500_prcmu_enable_wakeups(u32 wakeups);
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db8500_prcmu_request_clock(u8 clock, bool enable);
+int db8500_prcmu_set_display_clocks(void);
+int db8500_prcmu_disable_dsipll(void);
+int db8500_prcmu_enable_dsipll(void);
+void db8500_prcmu_config_abb_event_readout(u32 abb_events);
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int db8500_prcmu_config_esram0_deep_sleep(u8 state);
+u16 db8500_prcmu_get_reset_code(void);
+bool db8500_prcmu_is_ac_wake_requested(void);
+int db8500_prcmu_set_arm_opp(u8 opp);
+int db8500_prcmu_get_arm_opp(void);
+
#else /* !CONFIG_MFD_DB8500_PRCMU */
+static inline void db8500_prcmu_early_init(void) {}
+
static inline int prcmu_set_rc_a2p(enum romcode_write code)
{
return 0;
@@ -755,34 +569,12 @@
return AP_EXECUTE;
}
-static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
- bool keep_ap_pll)
-{
- return 0;
-}
-
-static inline void prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline void prcmu_disable_wakeups(void) {}
-
-static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline int prcmu_set_arm_opp(u8 opp)
-{
- return 0;
-}
-
-static inline int prcmu_get_arm_opp(void)
-{
- return ARM_100_OPP;
-}
-
-static bool prcmu_has_arm_maxopp(void)
+static inline bool prcmu_has_arm_maxopp(void)
{
return false;
}
-static bool prcmu_is_u8400(void)
+static inline bool prcmu_is_u8400(void)
{
return false;
}
@@ -817,13 +609,6 @@
return DDR_100_OPP;
}
-static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
-{
- return 0;
-}
-
-static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
-
static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
{
return 0;
@@ -844,21 +629,11 @@
return 0;
}
-static inline int prcmu_request_clock(u8 clock, bool enable)
-{
- return 0;
-}
-
static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
{
return 0;
}
-int prcmu_config_esram0_deep_sleep(u8 state)
-{
- return 0;
-}
-
static inline int prcmu_config_hotdog(u8 threshold)
{
return 0;
@@ -893,32 +668,8 @@
static inline void prcmu_ac_sleep_req(void) {}
-static inline void prcmu_system_reset(u16 reset_code) {}
-
static inline void prcmu_modem_reset(void) {}
-static inline bool prcmu_is_ac_wake_requested(void)
-{
- return false;
-}
-
-#ifndef CONFIG_UX500_SOC_DB5500
-static inline int prcmu_set_display_clocks(void)
-{
- return 0;
-}
-
-static inline int prcmu_disable_dsipll(void)
-{
- return 0;
-}
-
-static inline int prcmu_enable_dsipll(void)
-{
- return 0;
-}
-#endif
-
static inline int prcmu_enable_spi2(void)
{
return 0;
@@ -929,50 +680,95 @@
return 0;
}
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
+
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_set_display_clocks(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_disable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_enable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline u16 db8500_prcmu_get_reset_code(void)
+{
+ return 0;
+}
+
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+ return 0;
+}
+
+static inline int prcmu_enable_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int prcmu_disable_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int prcmu_kick_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int prcmu_load_a9wdog(u8 id, u32 val)
+{
+ return 0;
+}
+
+static inline bool db8500_prcmu_is_ac_wake_requested(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_set_arm_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_get_arm_opp(void)
+{
+ return 0;
+}
+
#endif /* !CONFIG_MFD_DB8500_PRCMU */
-#ifdef CONFIG_UX500_PRCMU_QOS_POWER
-int prcmu_qos_requirement(int pm_qos_class);
-int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
-int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
-void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
-int prcmu_qos_add_notifier(int prcmu_qos_class,
- struct notifier_block *notifier);
-int prcmu_qos_remove_notifier(int prcmu_qos_class,
- struct notifier_block *notifier);
-#else
-static inline int prcmu_qos_requirement(int prcmu_qos_class)
-{
- return 0;
-}
-
-static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
- char *name, s32 value)
-{
- return 0;
-}
-
-static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
- char *name, s32 new_value)
-{
- return 0;
-}
-
-static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
-{
-}
-
-static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
- struct notifier_block *notifier)
-{
- return 0;
-}
-static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
- struct notifier_block *notifier)
-{
- return 0;
-}
-
-#endif
-
#endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
new file mode 100644
index 0000000..bac942f
--- /dev/null
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -0,0 +1,549 @@
+/*
+ * Copyright (C) ST Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * STE Ux500 PRCMU API
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <asm/mach-types.h>
+
+/* PRCMU Wakeup defines */
+enum prcmu_wakeup_index {
+ PRCMU_WAKEUP_INDEX_RTC,
+ PRCMU_WAKEUP_INDEX_RTT0,
+ PRCMU_WAKEUP_INDEX_RTT1,
+ PRCMU_WAKEUP_INDEX_HSI0,
+ PRCMU_WAKEUP_INDEX_HSI1,
+ PRCMU_WAKEUP_INDEX_USB,
+ PRCMU_WAKEUP_INDEX_ABB,
+ PRCMU_WAKEUP_INDEX_ABB_FIFO,
+ PRCMU_WAKEUP_INDEX_ARM,
+ PRCMU_WAKEUP_INDEX_CD_IRQ,
+ NUM_PRCMU_WAKEUP_INDICES
+};
+#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
+
+/* EPOD (power domain) IDs */
+
+/*
+ * DB8500 EPODs
+ * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
+ * - EPOD_ID_SVAPIPE: power domain for SVA pipe
+ * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
+ * - EPOD_ID_SIAPIPE: power domain for SIA pipe
+ * - EPOD_ID_SGA: power domain for SGA
+ * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
+ * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
+ * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
+ * - NUM_EPOD_ID: number of power domains
+ *
+ * TODO: These should be prefixed.
+ */
+#define EPOD_ID_SVAMMDSP 0
+#define EPOD_ID_SVAPIPE 1
+#define EPOD_ID_SIAMMDSP 2
+#define EPOD_ID_SIAPIPE 3
+#define EPOD_ID_SGA 4
+#define EPOD_ID_B2R2_MCDE 5
+#define EPOD_ID_ESRAM12 6
+#define EPOD_ID_ESRAM34 7
+#define NUM_EPOD_ID 8
+
+/*
+ * DB5500 EPODs
+ */
+#define DB5500_EPOD_ID_BASE 0x0100
+#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0)
+#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1)
+#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2)
+#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3)
+#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6)
+#define DB5500_NUM_EPOD_ID 7
+
+/*
+ * state definition for EPOD (power domain)
+ * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
+ * - EPOD_STATE_OFF: The EPOD is switched off
+ * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
+ * retention
+ * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
+ * - EPOD_STATE_ON: Same as above, but with clock enabled
+ */
+#define EPOD_STATE_NO_CHANGE 0x00
+#define EPOD_STATE_OFF 0x01
+#define EPOD_STATE_RAMRET 0x02
+#define EPOD_STATE_ON_CLK_OFF 0x03
+#define EPOD_STATE_ON 0x04
+
+/*
+ * CLKOUT sources
+ */
+#define PRCMU_CLKSRC_CLK38M 0x00
+#define PRCMU_CLKSRC_ACLK 0x01
+#define PRCMU_CLKSRC_SYSCLK 0x02
+#define PRCMU_CLKSRC_LCDCLK 0x03
+#define PRCMU_CLKSRC_SDMMCCLK 0x04
+#define PRCMU_CLKSRC_TVCLK 0x05
+#define PRCMU_CLKSRC_TIMCLK 0x06
+#define PRCMU_CLKSRC_CLK009 0x07
+/* These are only valid for CLKOUT1: */
+#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40
+#define PRCMU_CLKSRC_I2CCLK 0x41
+#define PRCMU_CLKSRC_MSP02CLK 0x42
+#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43
+#define PRCMU_CLKSRC_HSIRXCLK 0x44
+#define PRCMU_CLKSRC_HSITXCLK 0x45
+#define PRCMU_CLKSRC_ARMCLKFIX 0x46
+#define PRCMU_CLKSRC_HDMICLK 0x47
+
+/*
+ * Clock identifiers.
+ */
+enum prcmu_clock {
+ PRCMU_SGACLK,
+ PRCMU_UARTCLK,
+ PRCMU_MSP02CLK,
+ PRCMU_MSP1CLK,
+ PRCMU_I2CCLK,
+ PRCMU_SDMMCCLK,
+ PRCMU_SLIMCLK,
+ PRCMU_PER1CLK,
+ PRCMU_PER2CLK,
+ PRCMU_PER3CLK,
+ PRCMU_PER5CLK,
+ PRCMU_PER6CLK,
+ PRCMU_PER7CLK,
+ PRCMU_LCDCLK,
+ PRCMU_BMLCLK,
+ PRCMU_HSITXCLK,
+ PRCMU_HSIRXCLK,
+ PRCMU_HDMICLK,
+ PRCMU_APEATCLK,
+ PRCMU_APETRACECLK,
+ PRCMU_MCDECLK,
+ PRCMU_IPI2CCLK,
+ PRCMU_DSIALTCLK,
+ PRCMU_DMACLK,
+ PRCMU_B2R2CLK,
+ PRCMU_TVCLK,
+ PRCMU_SSPCLK,
+ PRCMU_RNGCLK,
+ PRCMU_UICCCLK,
+ PRCMU_PWMCLK,
+ PRCMU_IRDACLK,
+ PRCMU_IRRCCLK,
+ PRCMU_SIACLK,
+ PRCMU_SVACLK,
+ PRCMU_NUM_REG_CLOCKS,
+ PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+ PRCMU_TIMCLK,
+ PRCMU_PLLSOC0,
+ PRCMU_PLLSOC1,
+ PRCMU_PLLDDR,
+};
+
+/**
+ * enum ape_opp - APE OPP states definition
+ * @APE_OPP_INIT:
+ * @APE_NO_CHANGE: The APE operating point is unchanged
+ * @APE_100_OPP: The new APE operating point is ape100opp
+ * @APE_50_OPP: 50%
+ */
+enum ape_opp {
+ APE_OPP_INIT = 0x00,
+ APE_NO_CHANGE = 0x01,
+ APE_100_OPP = 0x02,
+ APE_50_OPP = 0x03
+};
+
+/**
+ * enum arm_opp - ARM OPP states definition
+ * @ARM_OPP_INIT:
+ * @ARM_NO_CHANGE: The ARM operating point is unchanged
+ * @ARM_100_OPP: The new ARM operating point is arm100opp
+ * @ARM_50_OPP: The new ARM operating point is arm50opp
+ * @ARM_MAX_OPP: Operating point is "max" (more than 100)
+ * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
+ * @ARM_EXTCLK: The new ARM operating point is armExtClk
+ */
+enum arm_opp {
+ ARM_OPP_INIT = 0x00,
+ ARM_NO_CHANGE = 0x01,
+ ARM_100_OPP = 0x02,
+ ARM_50_OPP = 0x03,
+ ARM_MAX_OPP = 0x04,
+ ARM_MAX_FREQ100OPP = 0x05,
+ ARM_EXTCLK = 0x07
+};
+
+/**
+ * enum ddr_opp - DDR OPP states definition
+ * @DDR_100_OPP: The new DDR operating point is ddr100opp
+ * @DDR_50_OPP: The new DDR operating point is ddr50opp
+ * @DDR_25_OPP: The new DDR operating point is ddr25opp
+ */
+enum ddr_opp {
+ DDR_100_OPP = 0x00,
+ DDR_50_OPP = 0x01,
+ DDR_25_OPP = 0x02,
+};
+
+/*
+ * Definitions for controlling ESRAM0 in deep sleep.
+ */
+#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
+#define ESRAM0_DEEP_SLEEP_STATE_RET 2
+
+/**
+ * enum ddr_pwrst - DDR power states definition
+ * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
+ * @DDR_PWR_STATE_ON:
+ * @DDR_PWR_STATE_OFFLOWLAT:
+ * @DDR_PWR_STATE_OFFHIGHLAT:
+ */
+enum ddr_pwrst {
+ DDR_PWR_STATE_UNCHANGED = 0x00,
+ DDR_PWR_STATE_ON = 0x01,
+ DDR_PWR_STATE_OFFLOWLAT = 0x02,
+ DDR_PWR_STATE_OFFHIGHLAT = 0x03
+};
+
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+static inline void __init prcmu_early_init(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_early_init();
+ else
+ return db8500_prcmu_early_init();
+}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_set_power_state(state, keep_ulp_clk,
+ keep_ap_pll);
+ else
+ return db8500_prcmu_set_power_state(state, keep_ulp_clk,
+ keep_ap_pll);
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_set_epod(epod_id, epod_state);
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups)
+{
+ if (machine_is_u5500())
+ db5500_prcmu_enable_wakeups(wakeups);
+ else
+ db8500_prcmu_enable_wakeups(wakeups);
+}
+
+static inline void prcmu_disable_wakeups(void)
+{
+ prcmu_enable_wakeups(0);
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events)
+{
+ if (machine_is_u5500())
+ db5500_prcmu_config_abb_event_readout(abb_events);
+ else
+ db8500_prcmu_config_abb_event_readout(abb_events);
+}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+ if (machine_is_u5500())
+ db5500_prcmu_get_abb_event_buffer(buf);
+ else
+ db8500_prcmu_get_abb_event_buffer(buf);
+}
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_request_clock(clock, enable);
+ else
+ return db8500_prcmu_request_clock(clock, enable);
+}
+
+int prcmu_set_ape_opp(u8 opp);
+int prcmu_get_ape_opp(void);
+int prcmu_set_ddr_opp(u8 opp);
+int prcmu_get_ddr_opp(void);
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_set_arm_opp(opp);
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_get_arm_opp();
+}
+
+static inline void prcmu_system_reset(u16 reset_code)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_system_reset(reset_code);
+ else
+ return db8500_prcmu_system_reset(reset_code);
+}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_get_reset_code();
+ else
+ return db8500_prcmu_get_reset_code();
+}
+
+void prcmu_ac_wake_req(void);
+void prcmu_ac_sleep_req(void);
+void prcmu_modem_reset(void);
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_is_ac_wake_requested();
+ else
+ return db8500_prcmu_is_ac_wake_requested();
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_set_display_clocks();
+ else
+ return db8500_prcmu_set_display_clocks();
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_disable_dsipll();
+ else
+ return db8500_prcmu_disable_dsipll();
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_enable_dsipll();
+ else
+ return db8500_prcmu_enable_dsipll();
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_config_esram0_deep_sleep(state);
+}
+#else
+
+static inline void __init prcmu_early_init(void) {}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ return 0;
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ return 0;
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline void prcmu_disable_wakeups(void) {}
+
+static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+ return 0;
+}
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+ return 0;
+}
+
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+ return APE_100_OPP;
+}
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+ return ARM_100_OPP;
+}
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int prcmu_get_ddr_opp(void)
+{
+ return DDR_100_OPP;
+}
+
+static inline void prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+ return 0;
+}
+
+static inline void prcmu_ac_wake_req(void) {}
+
+static inline void prcmu_ac_sleep_req(void) {}
+
+static inline void prcmu_modem_reset(void) {}
+
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+ return false;
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+ return 0;
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+ *buf = NULL;
+}
+
+#endif
+
+/* PRCMU QoS APE OPP class */
+#define PRCMU_QOS_APE_OPP 1
+#define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_DEFAULT_VALUE -1
+
+#ifdef CONFIG_UX500_PRCMU_QOS_POWER
+
+unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
+void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
+void prcmu_qos_force_opp(int, s32);
+int prcmu_qos_requirement(int pm_qos_class);
+int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
+int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
+void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
+int prcmu_qos_add_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier);
+int prcmu_qos_remove_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier);
+
+#else
+
+static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
+{
+ return 0;
+}
+
+static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
+
+static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {}
+
+static inline int prcmu_qos_requirement(int prcmu_qos_class)
+{
+ return 0;
+}
+
+static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
+ char *name, s32 value)
+{
+ return 0;
+}
+
+static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
+ char *name, s32 new_value)
+{
+ return 0;
+}
+
+static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
+{
+}
+
+static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier)
+{
+ return 0;
+}
+static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier)
+{
+ return 0;
+}
+
+#endif
+
+#endif /* __MACH_PRCMU_H */
diff --git a/include/linux/mfd/intel_msic.h b/include/linux/mfd/intel_msic.h
new file mode 100644
index 0000000..439a7a6
--- /dev/null
+++ b/include/linux/mfd/intel_msic.h
@@ -0,0 +1,456 @@
+/*
+ * include/linux/mfd/intel_msic.h - Core interface for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_INTEL_MSIC_H__
+#define __LINUX_MFD_INTEL_MSIC_H__
+
+/* ID */
+#define INTEL_MSIC_ID0 0x000 /* RO */
+#define INTEL_MSIC_ID1 0x001 /* RO */
+
+/* IRQ */
+#define INTEL_MSIC_IRQLVL1 0x002
+#define INTEL_MSIC_ADC1INT 0x003
+#define INTEL_MSIC_CCINT 0x004
+#define INTEL_MSIC_PWRSRCINT 0x005
+#define INTEL_MSIC_PWRSRCINT1 0x006
+#define INTEL_MSIC_CHRINT 0x007
+#define INTEL_MSIC_CHRINT1 0x008
+#define INTEL_MSIC_RTCIRQ 0x009
+#define INTEL_MSIC_GPIO0LVIRQ 0x00a
+#define INTEL_MSIC_GPIO1LVIRQ 0x00b
+#define INTEL_MSIC_GPIOHVIRQ 0x00c
+#define INTEL_MSIC_VRINT 0x00d
+#define INTEL_MSIC_OCAUDIO 0x00e
+#define INTEL_MSIC_ACCDET 0x00f
+#define INTEL_MSIC_RESETIRQ1 0x010
+#define INTEL_MSIC_RESETIRQ2 0x011
+#define INTEL_MSIC_MADC1INT 0x012
+#define INTEL_MSIC_MCCINT 0x013
+#define INTEL_MSIC_MPWRSRCINT 0x014
+#define INTEL_MSIC_MPWRSRCINT1 0x015
+#define INTEL_MSIC_MCHRINT 0x016
+#define INTEL_MSIC_MCHRINT1 0x017
+#define INTEL_MSIC_RTCIRQMASK 0x018
+#define INTEL_MSIC_GPIO0LVIRQMASK 0x019
+#define INTEL_MSIC_GPIO1LVIRQMASK 0x01a
+#define INTEL_MSIC_GPIOHVIRQMASK 0x01b
+#define INTEL_MSIC_VRINTMASK 0x01c
+#define INTEL_MSIC_OCAUDIOMASK 0x01d
+#define INTEL_MSIC_ACCDETMASK 0x01e
+#define INTEL_MSIC_RESETIRQ1MASK 0x01f
+#define INTEL_MSIC_RESETIRQ2MASK 0x020
+#define INTEL_MSIC_IRQLVL1MSK 0x021
+#define INTEL_MSIC_PBCONFIG 0x03e
+#define INTEL_MSIC_PBSTATUS 0x03f /* RO */
+
+/* GPIO */
+#define INTEL_MSIC_GPIO0LV7CTLO 0x040
+#define INTEL_MSIC_GPIO0LV6CTLO 0x041
+#define INTEL_MSIC_GPIO0LV5CTLO 0x042
+#define INTEL_MSIC_GPIO0LV4CTLO 0x043
+#define INTEL_MSIC_GPIO0LV3CTLO 0x044
+#define INTEL_MSIC_GPIO0LV2CTLO 0x045
+#define INTEL_MSIC_GPIO0LV1CTLO 0x046
+#define INTEL_MSIC_GPIO0LV0CTLO 0x047
+#define INTEL_MSIC_GPIO1LV7CTLOS 0x048
+#define INTEL_MSIC_GPIO1LV6CTLO 0x049
+#define INTEL_MSIC_GPIO1LV5CTLO 0x04a
+#define INTEL_MSIC_GPIO1LV4CTLO 0x04b
+#define INTEL_MSIC_GPIO1LV3CTLO 0x04c
+#define INTEL_MSIC_GPIO1LV2CTLO 0x04d
+#define INTEL_MSIC_GPIO1LV1CTLO 0x04e
+#define INTEL_MSIC_GPIO1LV0CTLO 0x04f
+#define INTEL_MSIC_GPIO0LV7CTLI 0x050
+#define INTEL_MSIC_GPIO0LV6CTLI 0x051
+#define INTEL_MSIC_GPIO0LV5CTLI 0x052
+#define INTEL_MSIC_GPIO0LV4CTLI 0x053
+#define INTEL_MSIC_GPIO0LV3CTLI 0x054
+#define INTEL_MSIC_GPIO0LV2CTLI 0x055
+#define INTEL_MSIC_GPIO0LV1CTLI 0x056
+#define INTEL_MSIC_GPIO0LV0CTLI 0x057
+#define INTEL_MSIC_GPIO1LV7CTLIS 0x058
+#define INTEL_MSIC_GPIO1LV6CTLI 0x059
+#define INTEL_MSIC_GPIO1LV5CTLI 0x05a
+#define INTEL_MSIC_GPIO1LV4CTLI 0x05b
+#define INTEL_MSIC_GPIO1LV3CTLI 0x05c
+#define INTEL_MSIC_GPIO1LV2CTLI 0x05d
+#define INTEL_MSIC_GPIO1LV1CTLI 0x05e
+#define INTEL_MSIC_GPIO1LV0CTLI 0x05f
+#define INTEL_MSIC_PWM0CLKDIV1 0x061
+#define INTEL_MSIC_PWM0CLKDIV0 0x062
+#define INTEL_MSIC_PWM1CLKDIV1 0x063
+#define INTEL_MSIC_PWM1CLKDIV0 0x064
+#define INTEL_MSIC_PWM2CLKDIV1 0x065
+#define INTEL_MSIC_PWM2CLKDIV0 0x066
+#define INTEL_MSIC_PWM0DUTYCYCLE 0x067
+#define INTEL_MSIC_PWM1DUTYCYCLE 0x068
+#define INTEL_MSIC_PWM2DUTYCYCLE 0x069
+#define INTEL_MSIC_GPIO0HV3CTLO 0x06d
+#define INTEL_MSIC_GPIO0HV2CTLO 0x06e
+#define INTEL_MSIC_GPIO0HV1CTLO 0x06f
+#define INTEL_MSIC_GPIO0HV0CTLO 0x070
+#define INTEL_MSIC_GPIO1HV3CTLO 0x071
+#define INTEL_MSIC_GPIO1HV2CTLO 0x072
+#define INTEL_MSIC_GPIO1HV1CTLO 0x073
+#define INTEL_MSIC_GPIO1HV0CTLO 0x074
+#define INTEL_MSIC_GPIO0HV3CTLI 0x075
+#define INTEL_MSIC_GPIO0HV2CTLI 0x076
+#define INTEL_MSIC_GPIO0HV1CTLI 0x077
+#define INTEL_MSIC_GPIO0HV0CTLI 0x078
+#define INTEL_MSIC_GPIO1HV3CTLI 0x079
+#define INTEL_MSIC_GPIO1HV2CTLI 0x07a
+#define INTEL_MSIC_GPIO1HV1CTLI 0x07b
+#define INTEL_MSIC_GPIO1HV0CTLI 0x07c
+
+/* SVID */
+#define INTEL_MSIC_SVIDCTRL0 0x080
+#define INTEL_MSIC_SVIDCTRL1 0x081
+#define INTEL_MSIC_SVIDCTRL2 0x082
+#define INTEL_MSIC_SVIDTXLASTPKT3 0x083 /* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT2 0x084 /* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT1 0x085 /* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT0 0x086 /* RO */
+#define INTEL_MSIC_SVIDPKTOUTBYTE3 0x087
+#define INTEL_MSIC_SVIDPKTOUTBYTE2 0x088
+#define INTEL_MSIC_SVIDPKTOUTBYTE1 0x089
+#define INTEL_MSIC_SVIDPKTOUTBYTE0 0x08a
+#define INTEL_MSIC_SVIDRXVPDEBUG1 0x08b
+#define INTEL_MSIC_SVIDRXVPDEBUG0 0x08c
+#define INTEL_MSIC_SVIDRXLASTPKT3 0x08d /* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT2 0x08e /* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT1 0x08f /* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT0 0x090 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS3 0x091 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS2 0x092 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS1 0x093 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS0 0x094 /* RO */
+
+/* VREG */
+#define INTEL_MSIC_VCCLATCH 0x0c0
+#define INTEL_MSIC_VNNLATCH 0x0c1
+#define INTEL_MSIC_VCCCNT 0x0c2
+#define INTEL_MSIC_SMPSRAMP 0x0c3
+#define INTEL_MSIC_VNNCNT 0x0c4
+#define INTEL_MSIC_VNNAONCNT 0x0c5
+#define INTEL_MSIC_VCC122AONCNT 0x0c6
+#define INTEL_MSIC_V180AONCNT 0x0c7
+#define INTEL_MSIC_V500CNT 0x0c8
+#define INTEL_MSIC_VIHFCNT 0x0c9
+#define INTEL_MSIC_LDORAMP1 0x0ca
+#define INTEL_MSIC_LDORAMP2 0x0cb
+#define INTEL_MSIC_VCC108AONCNT 0x0cc
+#define INTEL_MSIC_VCC108ASCNT 0x0cd
+#define INTEL_MSIC_VCC108CNT 0x0ce
+#define INTEL_MSIC_VCCA100ASCNT 0x0cf
+#define INTEL_MSIC_VCCA100CNT 0x0d0
+#define INTEL_MSIC_VCC180AONCNT 0x0d1
+#define INTEL_MSIC_VCC180CNT 0x0d2
+#define INTEL_MSIC_VCC330CNT 0x0d3
+#define INTEL_MSIC_VUSB330CNT 0x0d4
+#define INTEL_MSIC_VCCSDIOCNT 0x0d5
+#define INTEL_MSIC_VPROG1CNT 0x0d6
+#define INTEL_MSIC_VPROG2CNT 0x0d7
+#define INTEL_MSIC_VEMMCSCNT 0x0d8
+#define INTEL_MSIC_VEMMC1CNT 0x0d9
+#define INTEL_MSIC_VEMMC2CNT 0x0da
+#define INTEL_MSIC_VAUDACNT 0x0db
+#define INTEL_MSIC_VHSPCNT 0x0dc
+#define INTEL_MSIC_VHSNCNT 0x0dd
+#define INTEL_MSIC_VHDMICNT 0x0de
+#define INTEL_MSIC_VOTGCNT 0x0df
+#define INTEL_MSIC_V1P35CNT 0x0e0
+#define INTEL_MSIC_V330AONCNT 0x0e1
+
+/* RESET */
+#define INTEL_MSIC_CHIPCNTRL 0x100 /* WO */
+#define INTEL_MSIC_ERCONFIG 0x101
+
+/* BURST */
+#define INTEL_MSIC_BATCURRENTLIMIT12 0x102
+#define INTEL_MSIC_BATTIMELIMIT12 0x103
+#define INTEL_MSIC_BATTIMELIMIT3 0x104
+#define INTEL_MSIC_BATTIMEDB 0x105
+#define INTEL_MSIC_BRSTCONFIGOUTPUTS 0x106
+#define INTEL_MSIC_BRSTCONFIGACTIONS 0x107
+#define INTEL_MSIC_BURSTCONTROLSTATUS 0x108
+
+/* RTC */
+#define INTEL_MSIC_RTCB1 0x140 /* RO */
+#define INTEL_MSIC_RTCB2 0x141 /* RO */
+#define INTEL_MSIC_RTCB3 0x142 /* RO */
+#define INTEL_MSIC_RTCB4 0x143 /* RO */
+#define INTEL_MSIC_RTCOB1 0x144
+#define INTEL_MSIC_RTCOB2 0x145
+#define INTEL_MSIC_RTCOB3 0x146
+#define INTEL_MSIC_RTCOB4 0x147
+#define INTEL_MSIC_RTCAB1 0x148
+#define INTEL_MSIC_RTCAB2 0x149
+#define INTEL_MSIC_RTCAB3 0x14a
+#define INTEL_MSIC_RTCAB4 0x14b
+#define INTEL_MSIC_RTCWAB1 0x14c
+#define INTEL_MSIC_RTCWAB2 0x14d
+#define INTEL_MSIC_RTCWAB3 0x14e
+#define INTEL_MSIC_RTCWAB4 0x14f
+#define INTEL_MSIC_RTCSC1 0x150
+#define INTEL_MSIC_RTCSC2 0x151
+#define INTEL_MSIC_RTCSC3 0x152
+#define INTEL_MSIC_RTCSC4 0x153
+#define INTEL_MSIC_RTCSTATUS 0x154 /* RO */
+#define INTEL_MSIC_RTCCONFIG1 0x155
+#define INTEL_MSIC_RTCCONFIG2 0x156
+
+/* CHARGER */
+#define INTEL_MSIC_BDTIMER 0x180
+#define INTEL_MSIC_BATTRMV 0x181
+#define INTEL_MSIC_VBUSDET 0x182
+#define INTEL_MSIC_VBUSDET1 0x183
+#define INTEL_MSIC_ADPHVDET 0x184
+#define INTEL_MSIC_ADPLVDET 0x185
+#define INTEL_MSIC_ADPDETDBDM 0x186
+#define INTEL_MSIC_LOWBATTDET 0x187
+#define INTEL_MSIC_CHRCTRL 0x188
+#define INTEL_MSIC_CHRCVOLTAGE 0x189
+#define INTEL_MSIC_CHRCCURRENT 0x18a
+#define INTEL_MSIC_SPCHARGER 0x18b
+#define INTEL_MSIC_CHRTTIME 0x18c
+#define INTEL_MSIC_CHRCTRL1 0x18d
+#define INTEL_MSIC_PWRSRCLMT 0x18e
+#define INTEL_MSIC_CHRSTWDT 0x18f
+#define INTEL_MSIC_WDTWRITE 0x190 /* WO */
+#define INTEL_MSIC_CHRSAFELMT 0x191
+#define INTEL_MSIC_SPWRSRCINT 0x192 /* RO */
+#define INTEL_MSIC_SPWRSRCINT1 0x193 /* RO */
+#define INTEL_MSIC_CHRLEDPWM 0x194
+#define INTEL_MSIC_CHRLEDCTRL 0x195
+
+/* ADC */
+#define INTEL_MSIC_ADC1CNTL1 0x1c0
+#define INTEL_MSIC_ADC1CNTL2 0x1c1
+#define INTEL_MSIC_ADC1CNTL3 0x1c2
+#define INTEL_MSIC_ADC1OFFSETH 0x1c3 /* RO */
+#define INTEL_MSIC_ADC1OFFSETL 0x1c4 /* RO */
+#define INTEL_MSIC_ADC1ADDR0 0x1c5
+#define INTEL_MSIC_ADC1ADDR1 0x1c6
+#define INTEL_MSIC_ADC1ADDR2 0x1c7
+#define INTEL_MSIC_ADC1ADDR3 0x1c8
+#define INTEL_MSIC_ADC1ADDR4 0x1c9
+#define INTEL_MSIC_ADC1ADDR5 0x1ca
+#define INTEL_MSIC_ADC1ADDR6 0x1cb
+#define INTEL_MSIC_ADC1ADDR7 0x1cc
+#define INTEL_MSIC_ADC1ADDR8 0x1cd
+#define INTEL_MSIC_ADC1ADDR9 0x1ce
+#define INTEL_MSIC_ADC1ADDR10 0x1cf
+#define INTEL_MSIC_ADC1ADDR11 0x1d0
+#define INTEL_MSIC_ADC1ADDR12 0x1d1
+#define INTEL_MSIC_ADC1ADDR13 0x1d2
+#define INTEL_MSIC_ADC1ADDR14 0x1d3
+#define INTEL_MSIC_ADC1SNS0H 0x1d4 /* RO */
+#define INTEL_MSIC_ADC1SNS0L 0x1d5 /* RO */
+#define INTEL_MSIC_ADC1SNS1H 0x1d6 /* RO */
+#define INTEL_MSIC_ADC1SNS1L 0x1d7 /* RO */
+#define INTEL_MSIC_ADC1SNS2H 0x1d8 /* RO */
+#define INTEL_MSIC_ADC1SNS2L 0x1d9 /* RO */
+#define INTEL_MSIC_ADC1SNS3H 0x1da /* RO */
+#define INTEL_MSIC_ADC1SNS3L 0x1db /* RO */
+#define INTEL_MSIC_ADC1SNS4H 0x1dc /* RO */
+#define INTEL_MSIC_ADC1SNS4L 0x1dd /* RO */
+#define INTEL_MSIC_ADC1SNS5H 0x1de /* RO */
+#define INTEL_MSIC_ADC1SNS5L 0x1df /* RO */
+#define INTEL_MSIC_ADC1SNS6H 0x1e0 /* RO */
+#define INTEL_MSIC_ADC1SNS6L 0x1e1 /* RO */
+#define INTEL_MSIC_ADC1SNS7H 0x1e2 /* RO */
+#define INTEL_MSIC_ADC1SNS7L 0x1e3 /* RO */
+#define INTEL_MSIC_ADC1SNS8H 0x1e4 /* RO */
+#define INTEL_MSIC_ADC1SNS8L 0x1e5 /* RO */
+#define INTEL_MSIC_ADC1SNS9H 0x1e6 /* RO */
+#define INTEL_MSIC_ADC1SNS9L 0x1e7 /* RO */
+#define INTEL_MSIC_ADC1SNS10H 0x1e8 /* RO */
+#define INTEL_MSIC_ADC1SNS10L 0x1e9 /* RO */
+#define INTEL_MSIC_ADC1SNS11H 0x1ea /* RO */
+#define INTEL_MSIC_ADC1SNS11L 0x1eb /* RO */
+#define INTEL_MSIC_ADC1SNS12H 0x1ec /* RO */
+#define INTEL_MSIC_ADC1SNS12L 0x1ed /* RO */
+#define INTEL_MSIC_ADC1SNS13H 0x1ee /* RO */
+#define INTEL_MSIC_ADC1SNS13L 0x1ef /* RO */
+#define INTEL_MSIC_ADC1SNS14H 0x1f0 /* RO */
+#define INTEL_MSIC_ADC1SNS14L 0x1f1 /* RO */
+#define INTEL_MSIC_ADC1BV0H 0x1f2 /* RO */
+#define INTEL_MSIC_ADC1BV0L 0x1f3 /* RO */
+#define INTEL_MSIC_ADC1BV1H 0x1f4 /* RO */
+#define INTEL_MSIC_ADC1BV1L 0x1f5 /* RO */
+#define INTEL_MSIC_ADC1BV2H 0x1f6 /* RO */
+#define INTEL_MSIC_ADC1BV2L 0x1f7 /* RO */
+#define INTEL_MSIC_ADC1BV3H 0x1f8 /* RO */
+#define INTEL_MSIC_ADC1BV3L 0x1f9 /* RO */
+#define INTEL_MSIC_ADC1BI0H 0x1fa /* RO */
+#define INTEL_MSIC_ADC1BI0L 0x1fb /* RO */
+#define INTEL_MSIC_ADC1BI1H 0x1fc /* RO */
+#define INTEL_MSIC_ADC1BI1L 0x1fd /* RO */
+#define INTEL_MSIC_ADC1BI2H 0x1fe /* RO */
+#define INTEL_MSIC_ADC1BI2L 0x1ff /* RO */
+#define INTEL_MSIC_ADC1BI3H 0x200 /* RO */
+#define INTEL_MSIC_ADC1BI3L 0x201 /* RO */
+#define INTEL_MSIC_CCCNTL 0x202
+#define INTEL_MSIC_CCOFFSETH 0x203 /* RO */
+#define INTEL_MSIC_CCOFFSETL 0x204 /* RO */
+#define INTEL_MSIC_CCADCHA 0x205 /* RO */
+#define INTEL_MSIC_CCADCLA 0x206 /* RO */
+
+/* AUDIO */
+#define INTEL_MSIC_AUDPLLCTRL 0x240
+#define INTEL_MSIC_DMICBUF0123 0x241
+#define INTEL_MSIC_DMICBUF45 0x242
+#define INTEL_MSIC_DMICGPO 0x244
+#define INTEL_MSIC_DMICMUX 0x245
+#define INTEL_MSIC_DMICCLK 0x246
+#define INTEL_MSIC_MICBIAS 0x247
+#define INTEL_MSIC_ADCCONFIG 0x248
+#define INTEL_MSIC_MICAMP1 0x249
+#define INTEL_MSIC_MICAMP2 0x24a
+#define INTEL_MSIC_NOISEMUX 0x24b
+#define INTEL_MSIC_AUDIOMUX12 0x24c
+#define INTEL_MSIC_AUDIOMUX34 0x24d
+#define INTEL_MSIC_AUDIOSINC 0x24e
+#define INTEL_MSIC_AUDIOTXEN 0x24f
+#define INTEL_MSIC_HSEPRXCTRL 0x250
+#define INTEL_MSIC_IHFRXCTRL 0x251
+#define INTEL_MSIC_VOICETXVOL 0x252
+#define INTEL_MSIC_SIDETONEVOL 0x253
+#define INTEL_MSIC_MUSICSHARVOL 0x254
+#define INTEL_MSIC_VOICETXCTRL 0x255
+#define INTEL_MSIC_HSMIXER 0x256
+#define INTEL_MSIC_DACCONFIG 0x257
+#define INTEL_MSIC_SOFTMUTE 0x258
+#define INTEL_MSIC_HSLVOLCTRL 0x259
+#define INTEL_MSIC_HSRVOLCTRL 0x25a
+#define INTEL_MSIC_IHFLVOLCTRL 0x25b
+#define INTEL_MSIC_IHFRVOLCTRL 0x25c
+#define INTEL_MSIC_DRIVEREN 0x25d
+#define INTEL_MSIC_LINEOUTCTRL 0x25e
+#define INTEL_MSIC_VIB1CTRL1 0x25f
+#define INTEL_MSIC_VIB1CTRL2 0x260
+#define INTEL_MSIC_VIB1CTRL3 0x261
+#define INTEL_MSIC_VIB1SPIPCM_1 0x262
+#define INTEL_MSIC_VIB1SPIPCM_2 0x263
+#define INTEL_MSIC_VIB1CTRL5 0x264
+#define INTEL_MSIC_VIB2CTRL1 0x265
+#define INTEL_MSIC_VIB2CTRL2 0x266
+#define INTEL_MSIC_VIB2CTRL3 0x267
+#define INTEL_MSIC_VIB2SPIPCM_1 0x268
+#define INTEL_MSIC_VIB2SPIPCM_2 0x269
+#define INTEL_MSIC_VIB2CTRL5 0x26a
+#define INTEL_MSIC_BTNCTRL1 0x26b
+#define INTEL_MSIC_BTNCTRL2 0x26c
+#define INTEL_MSIC_PCM1TXSLOT01 0x26d
+#define INTEL_MSIC_PCM1TXSLOT23 0x26e
+#define INTEL_MSIC_PCM1TXSLOT45 0x26f
+#define INTEL_MSIC_PCM1RXSLOT0123 0x270
+#define INTEL_MSIC_PCM1RXSLOT045 0x271
+#define INTEL_MSIC_PCM2TXSLOT01 0x272
+#define INTEL_MSIC_PCM2TXSLOT23 0x273
+#define INTEL_MSIC_PCM2TXSLOT45 0x274
+#define INTEL_MSIC_PCM2RXSLOT01 0x275
+#define INTEL_MSIC_PCM2RXSLOT23 0x276
+#define INTEL_MSIC_PCM2RXSLOT45 0x277
+#define INTEL_MSIC_PCM1CTRL1 0x278
+#define INTEL_MSIC_PCM1CTRL2 0x279
+#define INTEL_MSIC_PCM1CTRL3 0x27a
+#define INTEL_MSIC_PCM2CTRL1 0x27b
+#define INTEL_MSIC_PCM2CTRL2 0x27c
+
+/* HDMI */
+#define INTEL_MSIC_HDMIPUEN 0x280
+#define INTEL_MSIC_HDMISTATUS 0x281 /* RO */
+
+/* Physical address of the start of the MSIC interrupt tree in SRAM */
+#define INTEL_MSIC_IRQ_PHYS_BASE 0xffff7fc0
+
+/**
+ * struct intel_msic_gpio_pdata - platform data for the MSIC GPIO driver
+ * @gpio_base: base number for the GPIOs
+ */
+struct intel_msic_gpio_pdata {
+ unsigned gpio_base;
+};
+
+/**
+ * struct intel_msic_ocd_pdata - platform data for the MSIC OCD driver
+ * @gpio: GPIO number used for OCD interrupts
+ *
+ * The MSIC MFD driver converts @gpio into an IRQ number and passes it to
+ * the OCD driver as %IORESOURCE_IRQ.
+ */
+struct intel_msic_ocd_pdata {
+ unsigned gpio;
+};
+
+/* MSIC embedded blocks (subdevices) */
+enum intel_msic_block {
+ INTEL_MSIC_BLOCK_TOUCH,
+ INTEL_MSIC_BLOCK_ADC,
+ INTEL_MSIC_BLOCK_BATTERY,
+ INTEL_MSIC_BLOCK_GPIO,
+ INTEL_MSIC_BLOCK_AUDIO,
+ INTEL_MSIC_BLOCK_HDMI,
+ INTEL_MSIC_BLOCK_THERMAL,
+ INTEL_MSIC_BLOCK_POWER_BTN,
+ INTEL_MSIC_BLOCK_OCD,
+
+ INTEL_MSIC_BLOCK_LAST,
+};
+
+/**
+ * struct intel_msic_platform_data - platform data for the MSIC driver
+ * @irq: array of interrupt numbers, one per device. If @irq is set to %0
+ * for a given block, the corresponding platform device is not
+ * created. For devices which don't have an interrupt, use %0xff
+ * (this is same as in SFI spec).
+ * @gpio: platform data for the MSIC GPIO driver
+ * @ocd: platform data for the MSIC OCD driver
+ *
+ * Once the MSIC driver is initialized, the register interface is ready to
+ * use. All the platform devices for subdevices are created after the
+ * register interface is ready so that we can guarantee its availability to
+ * the subdevice drivers.
+ *
+ * Interrupt numbers are passed to the subdevices via %IORESOURCE_IRQ
+ * resources of the created platform device.
+ */
+struct intel_msic_platform_data {
+ int irq[INTEL_MSIC_BLOCK_LAST];
+ struct intel_msic_gpio_pdata *gpio;
+ struct intel_msic_ocd_pdata *ocd;
+};
+
+struct intel_msic;
+
+extern int intel_msic_reg_read(unsigned short reg, u8 *val);
+extern int intel_msic_reg_write(unsigned short reg, u8 val);
+extern int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask);
+extern int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count);
+extern int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count);
+
+/*
+ * pdev_to_intel_msic - gets an MSIC instance from the platform device
+ * @pdev: platform device pointer
+ *
+ * The client drivers need to have pointer to the MSIC instance if they
+ * want to call intel_msic_irq_read(). This macro can be used for
+ * convenience to get the MSIC pointer from @pdev where needed. This is
+ * _only_ valid for devices which are managed by the MSIC.
+ */
+#define pdev_to_intel_msic(pdev) (dev_get_drvdata(pdev->dev.parent))
+
+extern int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg,
+ u8 *val);
+
+#endif /* __LINUX_MFD_INTEL_MSIC_H__ */
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 5ff2400..3f4deb6 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -326,7 +326,6 @@
int irq;
int ono;
int irq_base;
- bool wakeup;
struct mutex irqlock;
int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index 7d0f3d6..a8eeda7 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -12,117 +12,6 @@
#include <linux/mfd/mc13xxx.h>
-struct mc13783;
-
-struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783);
-
-static inline void mc13783_lock(struct mc13783 *mc13783)
-{
- mc13xxx_lock(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline void mc13783_unlock(struct mc13783 *mc13783)
-{
- mc13xxx_unlock(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline int mc13783_reg_read(struct mc13783 *mc13783,
- unsigned int offset, u32 *val)
-{
- return mc13xxx_reg_read(mc13783_to_mc13xxx(mc13783), offset, val);
-}
-
-static inline int mc13783_reg_write(struct mc13783 *mc13783,
- unsigned int offset, u32 val)
-{
- return mc13xxx_reg_write(mc13783_to_mc13xxx(mc13783), offset, val);
-}
-
-static inline int mc13783_reg_rmw(struct mc13783 *mc13783,
- unsigned int offset, u32 mask, u32 val)
-{
- return mc13xxx_reg_rmw(mc13783_to_mc13xxx(mc13783), offset, mask, val);
-}
-
-static inline int mc13783_get_flags(struct mc13783 *mc13783)
-{
- return mc13xxx_get_flags(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline int mc13783_irq_request(struct mc13783 *mc13783, int irq,
- irq_handler_t handler, const char *name, void *dev)
-{
- return mc13xxx_irq_request(mc13783_to_mc13xxx(mc13783), irq,
- handler, name, dev);
-}
-
-static inline int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
- irq_handler_t handler, const char *name, void *dev)
-{
- return mc13xxx_irq_request_nounmask(mc13783_to_mc13xxx(mc13783), irq,
- handler, name, dev);
-}
-
-static inline int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev)
-{
- return mc13xxx_irq_free(mc13783_to_mc13xxx(mc13783), irq, dev);
-}
-
-static inline int mc13783_irq_mask(struct mc13783 *mc13783, int irq)
-{
- return mc13xxx_irq_mask(mc13783_to_mc13xxx(mc13783), irq);
-}
-
-static inline int mc13783_irq_unmask(struct mc13783 *mc13783, int irq)
-{
- return mc13xxx_irq_unmask(mc13783_to_mc13xxx(mc13783), irq);
-}
-static inline int mc13783_irq_status(struct mc13783 *mc13783, int irq,
- int *enabled, int *pending)
-{
- return mc13xxx_irq_status(mc13783_to_mc13xxx(mc13783),
- irq, enabled, pending);
-}
-
-static inline int mc13783_irq_ack(struct mc13783 *mc13783, int irq)
-{
- return mc13xxx_irq_ack(mc13783_to_mc13xxx(mc13783), irq);
-}
-
-#define MC13783_ADC0 43
-#define MC13783_ADC0_ADREFEN (1 << 10)
-#define MC13783_ADC0_ADREFMODE (1 << 11)
-#define MC13783_ADC0_TSMOD0 (1 << 12)
-#define MC13783_ADC0_TSMOD1 (1 << 13)
-#define MC13783_ADC0_TSMOD2 (1 << 14)
-#define MC13783_ADC0_ADINC1 (1 << 16)
-#define MC13783_ADC0_ADINC2 (1 << 17)
-
-#define MC13783_ADC0_TSMOD_MASK (MC13783_ADC0_TSMOD0 | \
- MC13783_ADC0_TSMOD1 | \
- MC13783_ADC0_TSMOD2)
-
-#define mc13783_regulator_init_data mc13xxx_regulator_init_data
-#define mc13783_regulator_platform_data mc13xxx_regulator_platform_data
-#define mc13783_led_platform_data mc13xxx_led_platform_data
-#define mc13783_leds_platform_data mc13xxx_leds_platform_data
-
-#define mc13783_platform_data mc13xxx_platform_data
-#define MC13783_USE_TOUCHSCREEN MC13XXX_USE_TOUCHSCREEN
-#define MC13783_USE_CODEC MC13XXX_USE_CODEC
-#define MC13783_USE_ADC MC13XXX_USE_ADC
-#define MC13783_USE_RTC MC13XXX_USE_RTC
-#define MC13783_USE_REGULATOR MC13XXX_USE_REGULATOR
-#define MC13783_USE_LED MC13XXX_USE_LED
-
-#define MC13783_ADC_MODE_TS 1
-#define MC13783_ADC_MODE_SINGLE_CHAN 2
-#define MC13783_ADC_MODE_MULT_CHAN 3
-
-int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
- unsigned int channel, unsigned int *sample);
-
-
#define MC13783_REG_SW1A 0
#define MC13783_REG_SW1B 1
#define MC13783_REG_SW2A 2
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index c064bea..3816c2f 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -37,6 +37,9 @@
int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
+ unsigned int mode, unsigned int channel, unsigned int *sample);
+
#define MC13XXX_IRQ_ADCDONE 0
#define MC13XXX_IRQ_ADCBISDONE 1
#define MC13XXX_IRQ_TS 2
@@ -137,17 +140,48 @@
char tc3_period;
};
+struct mc13xxx_buttons_platform_data {
+#define MC13783_BUTTON_DBNC_0MS 0
+#define MC13783_BUTTON_DBNC_30MS 1
+#define MC13783_BUTTON_DBNC_150MS 2
+#define MC13783_BUTTON_DBNC_750MS 3
+#define MC13783_BUTTON_ENABLE (1 << 2)
+#define MC13783_BUTTON_POL_INVERT (1 << 3)
+#define MC13783_BUTTON_RESET_EN (1 << 4)
+ int b1on_flags;
+ unsigned short b1on_key;
+ int b2on_flags;
+ unsigned short b2on_key;
+ int b3on_flags;
+ unsigned short b3on_key;
+};
+
struct mc13xxx_platform_data {
#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
#define MC13XXX_USE_CODEC (1 << 1)
#define MC13XXX_USE_ADC (1 << 2)
#define MC13XXX_USE_RTC (1 << 3)
-#define MC13XXX_USE_REGULATOR (1 << 4)
-#define MC13XXX_USE_LED (1 << 5)
unsigned int flags;
struct mc13xxx_regulator_platform_data regulators;
struct mc13xxx_leds_platform_data *leds;
+ struct mc13xxx_buttons_platform_data *buttons;
};
+#define MC13XXX_ADC_MODE_TS 1
+#define MC13XXX_ADC_MODE_SINGLE_CHAN 2
+#define MC13XXX_ADC_MODE_MULT_CHAN 3
+
+#define MC13XXX_ADC0 43
+#define MC13XXX_ADC0_ADREFEN (1 << 10)
+#define MC13XXX_ADC0_TSMOD0 (1 << 12)
+#define MC13XXX_ADC0_TSMOD1 (1 << 13)
+#define MC13XXX_ADC0_TSMOD2 (1 << 14)
+#define MC13XXX_ADC0_ADINC1 (1 << 16)
+#define MC13XXX_ADC0_ADINC2 (1 << 17)
+
+#define MC13XXX_ADC0_TSMOD_MASK (MC13XXX_ADC0_TSMOD0 | \
+ MC13XXX_ADC0_TSMOD1 | \
+ MC13XXX_ADC0_TSMOD2)
+
#endif /* ifndef __LINUX_MFD_MC13XXX_H */
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index 50d4a04..a808407 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -21,6 +21,7 @@
#include <linux/mfd/pcf50633/backlight.h>
struct pcf50633;
+struct regmap;
#define PCF50633_NUM_REGULATORS 11
@@ -134,7 +135,7 @@
struct pcf50633 {
struct device *dev;
- struct i2c_client *i2c_client;
+ struct regmap *regmap;
struct pcf50633_platform_data *pdata;
int irq;
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index b6bab1b..b19176e 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -1,6 +1,18 @@
#ifndef __LINUX_MFD_TPS6586X_H
#define __LINUX_MFD_TPS6586X_H
+#define TPS6586X_SLEW_RATE_INSTANTLY 0x00
+#define TPS6586X_SLEW_RATE_110UV 0x01
+#define TPS6586X_SLEW_RATE_220UV 0x02
+#define TPS6586X_SLEW_RATE_440UV 0x03
+#define TPS6586X_SLEW_RATE_880UV 0x04
+#define TPS6586X_SLEW_RATE_1760UV 0x05
+#define TPS6586X_SLEW_RATE_3520UV 0x06
+#define TPS6586X_SLEW_RATE_7040UV 0x07
+
+#define TPS6586X_SLEW_RATE_SET 0x08
+#define TPS6586X_SLEW_RATE_MASK 0x07
+
enum {
TPS6586X_ID_SM_0,
TPS6586X_ID_SM_1,
@@ -48,6 +60,10 @@
TPS6586X_INT_RTC_ALM2,
};
+struct tps6586x_settings {
+ int slew_rate;
+};
+
struct tps6586x_subdev_info {
int id;
const char *name;
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index 4c806f6..2463c261 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -68,11 +68,6 @@
#define TWL6040_REG_ACCCTL 0x2D
#define TWL6040_REG_STATUS 0x2E
-#define TWL6040_CACHEREGNUM (TWL6040_REG_STATUS + 1)
-
-#define TWL6040_VIOREGNUM 18
-#define TWL6040_VDDREGNUM 21
-
/* INTID (0x03) fields */
#define TWL6040_THINT 0x01
@@ -125,34 +120,24 @@
#define TWL6040_LPLLFIN 0x08
#define TWL6040_HPLLSEL 0x10
-/* HSLCTL (0x10) fields */
+/* HSLCTL/R (0x10/0x11) fields */
-#define TWL6040_HSDACMODEL 0x02
-#define TWL6040_HSDRVMODEL 0x08
+#define TWL6040_HSDACENA (1 << 0)
+#define TWL6040_HSDACMODE (1 << 1)
+#define TWL6040_HSDRVMODE (1 << 3)
-/* HSRCTL (0x11) fields */
+/* VIBCTLL/R (0x18/0x1A) fields */
-#define TWL6040_HSDACMODER 0x02
-#define TWL6040_HSDRVMODER 0x08
+#define TWL6040_VIBENA (1 << 0)
+#define TWL6040_VIBSEL (1 << 1)
+#define TWL6040_VIBCTRL (1 << 2)
+#define TWL6040_VIBCTRL_P (1 << 3)
+#define TWL6040_VIBCTRL_N (1 << 4)
-/* VIBCTLL (0x18) fields */
-
-#define TWL6040_VIBENAL 0x01
-#define TWL6040_VIBCTRLL 0x04
-#define TWL6040_VIBCTRLLP 0x08
-#define TWL6040_VIBCTRLLN 0x10
-
-/* VIBDATL (0x19) fields */
+/* VIBDATL/R (0x19/0x1B) fields */
#define TWL6040_VIBDAT_MAX 0x64
-/* VIBCTLR (0x1A) fields */
-
-#define TWL6040_VIBENAR 0x01
-#define TWL6040_VIBCTRLR 0x04
-#define TWL6040_VIBCTRLRP 0x08
-#define TWL6040_VIBCTRLRN 0x10
-
/* GPOCTL (0x1E) fields */
#define TWL6040_GPO1 0x01
@@ -200,6 +185,7 @@
int audpwron;
int power_count;
int rev;
+ u8 vibra_ctrl_cache[2];
int pll;
unsigned int sysclk;
@@ -224,5 +210,13 @@
unsigned int twl6040_get_sysclk(struct twl6040 *twl6040);
int twl6040_irq_init(struct twl6040 *twl6040);
void twl6040_irq_exit(struct twl6040 *twl6040);
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040);
+
+static inline int twl6040_get_revid(struct twl6040 *twl6040)
+{
+ return twl6040->rev;
+}
+
#endif /* End of __TWL6040_CODEC_H__ */
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index ed8fe0d..4b12118 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -382,6 +382,7 @@
/* Used by the interrupt controller code to post writes */
int gpio_update[WM831X_NUM_GPIO_REGS];
+ bool gpio_level[WM831X_NUM_GPIO_REGS];
struct mutex auxadc_lock;
struct list_head auxadc_pending;
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
index 45df450..f44bdb72 100644
--- a/include/linux/mfd/wm8994/core.h
+++ b/include/linux/mfd/wm8994/core.h
@@ -20,6 +20,7 @@
enum wm8994_type {
WM8994 = 0,
WM8958 = 1,
+ WM1811 = 2,
};
struct regulator_dev;
@@ -58,6 +59,8 @@
struct device *dev;
struct regmap *regmap;
+ bool ldo_ena_always_driven;
+
int gpio_base;
int irq_base;
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 97cf4f2..ea32f30 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -167,6 +167,13 @@
/* WM8958 microphone bias configuration */
int micbias[2];
+
+ /* Disable the internal pull downs on the LDOs if they are
+ * always driven (eg, connected to an always on supply or
+ * GPIO that always drives an output. If they float power
+ * consumption will rise.
+ */
+ bool ldo_ena_always_driven;
};
#endif
diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h
index f3ee842..fae2950 100644
--- a/include/linux/mfd/wm8994/registers.h
+++ b/include/linux/mfd/wm8994/registers.h
@@ -72,6 +72,7 @@
#define WM8994_DC_SERVO_2 0x55
#define WM8994_DC_SERVO_4 0x57
#define WM8994_DC_SERVO_READBACK 0x58
+#define WM8994_DC_SERVO_4E 0x59
#define WM8994_ANALOGUE_HP_1 0x60
#define WM8958_MIC_DETECT_1 0xD0
#define WM8958_MIC_DETECT_2 0xD1
@@ -133,6 +134,8 @@
#define WM8994_AIF1_DAC1_FILTERS_2 0x421
#define WM8994_AIF1_DAC2_FILTERS_1 0x422
#define WM8994_AIF1_DAC2_FILTERS_2 0x423
+#define WM8958_AIF1_DAC1_NOISE_GATE 0x430
+#define WM8958_AIF1_DAC2_NOISE_GATE 0x431
#define WM8994_AIF1_DRC1_1 0x440
#define WM8994_AIF1_DRC1_2 0x441
#define WM8994_AIF1_DRC1_3 0x442
@@ -190,6 +193,7 @@
#define WM8994_AIF2_ADC_FILTERS 0x510
#define WM8994_AIF2_DAC_FILTERS_1 0x520
#define WM8994_AIF2_DAC_FILTERS_2 0x521
+#define WM8958_AIF2_DAC_NOISE_GATE 0x530
#define WM8994_AIF2_DRC_1 0x540
#define WM8994_AIF2_DRC_2 0x541
#define WM8994_AIF2_DRC_3 0x542
@@ -1921,6 +1925,44 @@
#define WM8994_LDO2_DISCH_WIDTH 1 /* LDO2_DISCH */
/*
+ * R61 (0x3D) - MICBIAS1
+ */
+#define WM8958_MICB1_RATE 0x0020 /* MICB1_RATE */
+#define WM8958_MICB1_RATE_MASK 0x0020 /* MICB1_RATE */
+#define WM8958_MICB1_RATE_SHIFT 5 /* MICB1_RATE */
+#define WM8958_MICB1_RATE_WIDTH 1 /* MICB1_RATE */
+#define WM8958_MICB1_MODE 0x0010 /* MICB1_MODE */
+#define WM8958_MICB1_MODE_MASK 0x0010 /* MICB1_MODE */
+#define WM8958_MICB1_MODE_SHIFT 4 /* MICB1_MODE */
+#define WM8958_MICB1_MODE_WIDTH 1 /* MICB1_MODE */
+#define WM8958_MICB1_LVL_MASK 0x000E /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_LVL_SHIFT 1 /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_LVL_WIDTH 3 /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_DISCH 0x0001 /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_MASK 0x0001 /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_SHIFT 0 /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_WIDTH 1 /* MICB1_DISCH */
+
+/*
+ * R62 (0x3E) - MICBIAS2
+ */
+#define WM8958_MICB2_RATE 0x0020 /* MICB2_RATE */
+#define WM8958_MICB2_RATE_MASK 0x0020 /* MICB2_RATE */
+#define WM8958_MICB2_RATE_SHIFT 5 /* MICB2_RATE */
+#define WM8958_MICB2_RATE_WIDTH 1 /* MICB2_RATE */
+#define WM8958_MICB2_MODE 0x0010 /* MICB2_MODE */
+#define WM8958_MICB2_MODE_MASK 0x0010 /* MICB2_MODE */
+#define WM8958_MICB2_MODE_SHIFT 4 /* MICB2_MODE */
+#define WM8958_MICB2_MODE_WIDTH 1 /* MICB2_MODE */
+#define WM8958_MICB2_LVL_MASK 0x000E /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_LVL_SHIFT 1 /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_LVL_WIDTH 3 /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_DISCH 0x0001 /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_MASK 0x0001 /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */
+
+/*
* R76 (0x4C) - Charge Pump (1)
*/
#define WM8994_CP_ENA 0x8000 /* CP_ENA */
@@ -2027,6 +2069,10 @@
/*
* R96 (0x60) - Analogue HP (1)
*/
+#define WM1811_HPOUT1_ATTN 0x0100 /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_MASK 0x0100 /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_SHIFT 8 /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_WIDTH 1 /* HPOUT1_ATTN */
#define WM8994_HPOUT1L_RMV_SHORT 0x0080 /* HPOUT1L_RMV_SHORT */
#define WM8994_HPOUT1L_RMV_SHORT_MASK 0x0080 /* HPOUT1L_RMV_SHORT */
#define WM8994_HPOUT1L_RMV_SHORT_SHIFT 7 /* HPOUT1L_RMV_SHORT */
@@ -2949,6 +2995,34 @@
#define WM8994_AIF1DAC2_3D_ENA_WIDTH 1 /* AIF1DAC2_3D_ENA */
/*
+ * R1072 (0x430) - AIF1 DAC1 Noise Gate
+ */
+#define WM8958_AIF1DAC1_NG_HLD_MASK 0x0060 /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_HLD_SHIFT 5 /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_HLD_WIDTH 2 /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_THR_MASK 0x000E /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_THR_SHIFT 1 /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_THR_WIDTH 3 /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_ENA 0x0001 /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_MASK 0x0001 /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_SHIFT 0 /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_WIDTH 1 /* AIF1DAC1_NG_ENA */
+
+/*
+ * R1073 (0x431) - AIF1 DAC2 Noise Gate
+ */
+#define WM8958_AIF1DAC2_NG_HLD_MASK 0x0060 /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_HLD_SHIFT 5 /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_HLD_WIDTH 2 /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_THR_MASK 0x000E /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_THR_SHIFT 1 /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_THR_WIDTH 3 /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_ENA 0x0001 /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_MASK 0x0001 /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_SHIFT 0 /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_WIDTH 1 /* AIF1DAC2_NG_ENA */
+
+/*
* R1088 (0x440) - AIF1 DRC1 (1)
*/
#define WM8994_AIF1DRC1_SIG_DET_RMS_MASK 0xF800 /* AIF1DRC1_SIG_DET_RMS - [15:11] */
@@ -3560,6 +3634,20 @@
#define WM8994_AIF2DAC_3D_ENA_WIDTH 1 /* AIF2DAC_3D_ENA */
/*
+ * R1328 (0x530) - AIF2 DAC Noise Gate
+ */
+#define WM8958_AIF2DAC_NG_HLD_MASK 0x0060 /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_HLD_SHIFT 5 /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_HLD_WIDTH 2 /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_THR_MASK 0x000E /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_THR_SHIFT 1 /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_THR_WIDTH 3 /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_ENA 0x0001 /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_MASK 0x0001 /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_SHIFT 0 /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_WIDTH 1 /* AIF2DAC_NG_ENA */
+
+/*
* R1344 (0x540) - AIF2 DRC (1)
*/
#define WM8994_AIF2DRC_SIG_DET_RMS_MASK 0xF800 /* AIF2DRC_SIG_DET_RMS - [15:11] */
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 2366f94..84b0b18 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -61,6 +61,7 @@
MLX4_DEV_CAP_FLAG_RC = 1LL << 0,
MLX4_DEV_CAP_FLAG_UC = 1LL << 1,
MLX4_DEV_CAP_FLAG_UD = 1LL << 2,
+ MLX4_DEV_CAP_FLAG_XRC = 1LL << 3,
MLX4_DEV_CAP_FLAG_SRQ = 1LL << 6,
MLX4_DEV_CAP_FLAG_IPOIB_CSUM = 1LL << 7,
MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR = 1LL << 8,
@@ -83,6 +84,12 @@
MLX4_DEV_CAP_FLAG_COUNTERS = 1LL << 48
};
+#define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90)
+
+enum {
+ MLX_EXT_PORT_CAP_FLAG_EXTENDED_PORT_INFO = 1 << 0
+};
+
enum {
MLX4_BMME_FLAG_LOCAL_INV = 1 << 6,
MLX4_BMME_FLAG_REMOTE_INV = 1 << 7,
@@ -257,6 +264,8 @@
int num_qp_per_mgm;
int num_pds;
int reserved_pds;
+ int max_xrcds;
+ int reserved_xrcds;
int mtt_entry_sz;
u32 max_msg_sz;
u32 page_size_cap;
@@ -277,6 +286,7 @@
u32 port_mask;
enum mlx4_port_type possible_type[MLX4_MAX_PORTS + 1];
u32 max_counters;
+ u8 ext_port_cap[MLX4_MAX_PORTS + 1];
};
struct mlx4_buf_list {
@@ -500,6 +510,8 @@
int mlx4_pd_alloc(struct mlx4_dev *dev, u32 *pdn);
void mlx4_pd_free(struct mlx4_dev *dev, u32 pdn);
+int mlx4_xrcd_alloc(struct mlx4_dev *dev, u32 *xrcdn);
+void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn);
int mlx4_uar_alloc(struct mlx4_dev *dev, struct mlx4_uar *uar);
void mlx4_uar_free(struct mlx4_dev *dev, struct mlx4_uar *uar);
@@ -539,8 +551,8 @@
int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp);
void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp);
-int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, struct mlx4_mtt *mtt,
- u64 db_rec, struct mlx4_srq *srq);
+int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, u32 cqn, u16 xrcdn,
+ struct mlx4_mtt *mtt, u64 db_rec, struct mlx4_srq *srq);
void mlx4_srq_free(struct mlx4_dev *dev, struct mlx4_srq *srq);
int mlx4_srq_arm(struct mlx4_dev *dev, struct mlx4_srq *srq, int limit_watermark);
int mlx4_srq_query(struct mlx4_dev *dev, struct mlx4_srq *srq, int *limit_watermark);
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 4001c82..48cc4cb 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -75,6 +75,7 @@
MLX4_QP_ST_UC = 0x1,
MLX4_QP_ST_RD = 0x2,
MLX4_QP_ST_UD = 0x3,
+ MLX4_QP_ST_XRC = 0x6,
MLX4_QP_ST_MLX = 0x7
};
@@ -137,7 +138,7 @@
__be32 ssn;
__be32 params2;
__be32 rnr_nextrecvpsn;
- __be32 srcd;
+ __be32 xrcd;
__be32 cqn_recv;
__be64 db_rec_addr;
__be32 qkey;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 7438071..3dc3a8c 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -356,36 +356,50 @@
return page;
}
+/*
+ * The atomic page->_mapcount, starts from -1: so that transitions
+ * both from it and to it can be tracked, using atomic_inc_and_test
+ * and atomic_add_negative(-1).
+ */
+static inline void reset_page_mapcount(struct page *page)
+{
+ atomic_set(&(page)->_mapcount, -1);
+}
+
+static inline int page_mapcount(struct page *page)
+{
+ return atomic_read(&(page)->_mapcount) + 1;
+}
+
static inline int page_count(struct page *page)
{
return atomic_read(&compound_head(page)->_count);
}
-static inline void get_page(struct page *page)
+static inline void get_huge_page_tail(struct page *page)
{
/*
- * Getting a normal page or the head of a compound page
- * requires to already have an elevated page->_count. Only if
- * we're getting a tail page, the elevated page->_count is
- * required only in the head page, so for tail pages the
- * bugcheck only verifies that the page->_count isn't
- * negative.
+ * __split_huge_page_refcount() cannot run
+ * from under us.
*/
- VM_BUG_ON(atomic_read(&page->_count) < !PageTail(page));
- atomic_inc(&page->_count);
+ VM_BUG_ON(page_mapcount(page) < 0);
+ VM_BUG_ON(atomic_read(&page->_count) != 0);
+ atomic_inc(&page->_mapcount);
+}
+
+extern bool __get_page_tail(struct page *page);
+
+static inline void get_page(struct page *page)
+{
+ if (unlikely(PageTail(page)))
+ if (likely(__get_page_tail(page)))
+ return;
/*
- * Getting a tail page will elevate both the head and tail
- * page->_count(s).
+ * Getting a normal page or the head of a compound page
+ * requires to already have an elevated page->_count.
*/
- if (unlikely(PageTail(page))) {
- /*
- * This is safe only because
- * __split_huge_page_refcount can't run under
- * get_page().
- */
- VM_BUG_ON(atomic_read(&page->first_page->_count) <= 0);
- atomic_inc(&page->first_page->_count);
- }
+ VM_BUG_ON(atomic_read(&page->_count) <= 0);
+ atomic_inc(&page->_count);
}
static inline struct page *virt_to_head_page(const void *x)
@@ -804,21 +818,6 @@
}
/*
- * The atomic page->_mapcount, like _count, starts from -1:
- * so that transitions both from it and to it can be tracked,
- * using atomic_inc_and_test and atomic_add_negative(-1).
- */
-static inline void reset_page_mapcount(struct page *page)
-{
- atomic_set(&(page)->_mapcount, -1);
-}
-
-static inline int page_mapcount(struct page *page)
-{
- return atomic_read(&(page)->_mapcount) + 1;
-}
-
-/*
* Return true if this page is mapped into pagetables.
*/
static inline int page_mapped(struct page *page)
@@ -1334,7 +1333,8 @@
extern void si_meminfo_node(struct sysinfo *val, int nid);
extern int after_bootmem;
-extern void warn_alloc_failed(gfp_t gfp_mask, int order, const char *fmt, ...);
+extern __printf(3, 4)
+void warn_alloc_failed(gfp_t gfp_mask, int order, const char *fmt, ...);
extern void setup_per_cpu_pageset(void);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index c93d00a..5b42f1b 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -62,10 +62,23 @@
struct {
union {
- atomic_t _mapcount; /* Count of ptes mapped in mms,
- * to show when page is mapped
- * & limit reverse map searches.
- */
+ /*
+ * Count of ptes mapped in
+ * mms, to show when page is
+ * mapped & limit reverse map
+ * searches.
+ *
+ * Used also for tail pages
+ * refcounting instead of
+ * _count. Tail pages cannot
+ * be mapped and keeping the
+ * tail page _count zero at
+ * all times guarantees
+ * get_page_unless_zero() will
+ * never succeed on tail
+ * pages.
+ */
+ atomic_t _mapcount;
struct {
unsigned inuse:16;
@@ -304,8 +317,15 @@
unsigned long hiwater_rss; /* High-watermark of RSS usage */
unsigned long hiwater_vm; /* High-water virtual memory usage */
- unsigned long total_vm, locked_vm, shared_vm, exec_vm;
- unsigned long stack_vm, reserved_vm, def_flags, nr_ptes;
+ unsigned long total_vm; /* Total pages mapped */
+ unsigned long locked_vm; /* Pages that have PG_mlocked set */
+ unsigned long pinned_vm; /* Refcount permanently increased */
+ unsigned long shared_vm; /* Shared pages (files) */
+ unsigned long exec_vm; /* VM_EXEC & ~VM_WRITE */
+ unsigned long stack_vm; /* VM_GROWSUP/DOWN */
+ unsigned long reserved_vm; /* VM_RESERVED|VM_IO pages */
+ unsigned long def_flags;
+ unsigned long nr_ptes; /* Page table pages */
unsigned long start_code, end_code, start_data, end_data;
unsigned long start_brk, brk, start_stack;
unsigned long arg_start, arg_end, env_start, env_end;
@@ -336,9 +356,6 @@
unsigned int token_priority;
unsigned int last_interval;
- /* How many tasks sharing this mm are OOM_DISABLE */
- atomic_t oom_disable_count;
-
unsigned long flags; /* Must use atomic bitops to access the bits */
struct core_state *core_state; /* coredumping support */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index b460fc2..415f2db 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -50,8 +50,12 @@
u8 rel_sectors;
u8 rel_param;
u8 part_config;
+ u8 cache_ctrl;
+ u8 rst_n_function;
unsigned int part_time; /* Units: ms */
unsigned int sa_timeout; /* Units: 100ns */
+ unsigned int generic_cmd6_time; /* Units: 10ms */
+ unsigned int power_off_longtime; /* Units: ms */
unsigned int hs_max_dtr;
unsigned int sectors;
unsigned int card_type;
@@ -63,11 +67,15 @@
bool enhanced_area_en; /* enable bit */
unsigned long long enhanced_area_offset; /* Units: Byte */
unsigned int enhanced_area_size; /* Units: KB */
- unsigned int boot_size; /* in bytes */
+ unsigned int cache_size; /* Units: KB */
+ bool hpi_en; /* HPI enablebit */
+ bool hpi; /* HPI support bit */
+ unsigned int hpi_cmd; /* cmd used as HPI */
u8 raw_partition_support; /* 160 */
u8 raw_erased_mem_count; /* 181 */
u8 raw_ext_csd_structure; /* 194 */
u8 raw_card_type; /* 196 */
+ u8 out_of_int_time; /* 198 */
u8 raw_s_a_timeout; /* 217 */
u8 raw_hc_erase_gap_size; /* 221 */
u8 raw_erase_timeout_mult; /* 223 */
@@ -77,6 +85,9 @@
u8 raw_sec_feature_support;/* 231 */
u8 raw_trim_mult; /* 232 */
u8 raw_sectors[4]; /* 212 - 4 bytes */
+
+ unsigned int feature_support;
+#define MMC_DISCARD_FEATURE BIT(0) /* CMD38 feature */
};
struct sd_scr {
@@ -157,6 +168,24 @@
#define SDIO_MAX_FUNCS 7
+/* The number of MMC physical partitions. These consist of:
+ * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION 2
+#define MMC_NUM_GP_PARTITION 4
+#define MMC_NUM_PHY_PARTITION 6
+#define MAX_MMC_PART_NAME_LEN 20
+
+/*
+ * MMC Physical partitions
+ */
+struct mmc_part {
+ unsigned int size; /* partition size (in bytes) */
+ unsigned int part_cfg; /* partition type */
+ char name[MAX_MMC_PART_NAME_LEN];
+ bool force_ro; /* to make boot parts RO by default */
+};
+
/*
* MMC device
*/
@@ -188,6 +217,13 @@
#define MMC_QUIRK_DISABLE_CD (1<<5) /* disconnect CD/DAT[3] resistor */
#define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */
#define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
+#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
+ /* byte mode */
+ unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */
+#define MMC_NO_POWER_NOTIFICATION 0
+#define MMC_POWERED_ON 1
+#define MMC_POWEROFF_SHORT 2
+#define MMC_POWEROFF_LONG 3
unsigned int erase_size; /* erase size in sectors */
unsigned int erase_shift; /* if erase unit is power 2 */
@@ -216,9 +252,24 @@
unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
struct dentry *debugfs_root;
+ struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
+ unsigned int nr_parts;
};
/*
+ * This function fill contents in mmc_part.
+ */
+static inline void mmc_part_add(struct mmc_card *card, unsigned int size,
+ unsigned int part_cfg, char *name, int idx, bool ro)
+{
+ card->part[card->nr_parts].size = size;
+ card->part[card->nr_parts].part_cfg = part_cfg;
+ sprintf(card->part[card->nr_parts].name, name, idx);
+ card->part[card->nr_parts].force_ro = ro;
+ card->nr_parts++;
+}
+
+/*
* The world is not perfect and supplies us with broken mmc/sdio devices.
* For at least some of these bugs we need a work-around.
*/
@@ -377,6 +428,11 @@
return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF;
}
+static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
+}
+
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index b8b1b7a..174a844 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -136,6 +136,7 @@
extern struct mmc_async_req *mmc_start_req(struct mmc_host *,
struct mmc_async_req *, int *);
+extern int mmc_interrupt_hpi(struct mmc_card *);
extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
@@ -146,6 +147,7 @@
#define MMC_ERASE_ARG 0x00000000
#define MMC_SECURE_ERASE_ARG 0x80000000
#define MMC_TRIM_ARG 0x00000001
+#define MMC_DISCARD_ARG 0x00000003
#define MMC_SECURE_TRIM1_ARG 0x80000001
#define MMC_SECURE_TRIM2_ARG 0x80008000
@@ -156,12 +158,17 @@
unsigned int arg);
extern int mmc_can_erase(struct mmc_card *card);
extern int mmc_can_trim(struct mmc_card *card);
+extern int mmc_can_discard(struct mmc_card *card);
+extern int mmc_can_sanitize(struct mmc_card *card);
extern int mmc_can_secure_erase_trim(struct mmc_card *card);
extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
unsigned int nr);
extern unsigned int mmc_calc_max_discard(struct mmc_card *card);
extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+extern int mmc_hw_reset(struct mmc_host *host);
+extern int mmc_hw_reset_check(struct mmc_host *host);
+extern int mmc_can_reset(struct mmc_card *card);
extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
@@ -171,6 +178,8 @@
extern void mmc_do_release_host(struct mmc_host *host);
extern int mmc_try_claim_host(struct mmc_host *host);
+extern int mmc_flush_cache(struct mmc_card *);
+
/**
* mmc_claim_host - exclusively claim a host
* @host: mmc host to claim
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 6b46819..6dc9b805 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -72,6 +72,8 @@
* rate and timeout calculations.
* @current_speed: Configured rate of the controller.
* @num_slots: Number of slots available.
+ * @verid: Denote Version ID.
+ * @data_offset: Set the offset of DATA register according to VERID.
* @pdev: Platform device associated with the MMC controller.
* @pdata: Platform data associated with the MMC controller.
* @slot: Slots sharing this MMC controller.
@@ -147,6 +149,8 @@
u32 current_speed;
u32 num_slots;
u32 fifoth_val;
+ u16 verid;
+ u16 data_offset;
struct platform_device *pdev;
struct dw_mci_board *pdata;
struct dw_mci_slot *slot[MAX_MCI_SLOTS];
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 1d09562..a3ac9c4 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -12,6 +12,7 @@
#include <linux/leds.h>
#include <linux/sched.h>
+#include <linux/fault-inject.h>
#include <linux/mmc/core.h>
#include <linux/mmc/pm.h>
@@ -108,6 +109,9 @@
* It is optional for the host to implement pre_req and post_req in
* order to support double buffering of requests (prepare one
* request while another request is active).
+ * pre_req() must always be followed by a post_req().
+ * To undo a call made to pre_req(), call post_req() with
+ * a nonzero err condition.
*/
void (*post_req)(struct mmc_host *host, struct mmc_request *req,
int err);
@@ -147,6 +151,7 @@
int (*execute_tuning)(struct mmc_host *host);
void (*enable_preset_value)(struct mmc_host *host, bool enable);
int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
+ void (*hw_reset)(struct mmc_host *host);
};
struct mmc_card;
@@ -229,8 +234,20 @@
#define MMC_CAP_MAX_CURRENT_600 (1 << 28) /* Host max current limit is 600mA */
#define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */
#define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */
+#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */
+
+ unsigned int caps2; /* More host capabilities */
+
+#define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */
+#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */
+#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */
+#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */
mmc_pm_flag_t pm_caps; /* supported pm features */
+ unsigned int power_notify_type;
+#define MMC_HOST_PW_NOTIFY_NONE 0
+#define MMC_HOST_PW_NOTIFY_SHORT 1
+#define MMC_HOST_PW_NOTIFY_LONG 2
#ifdef CONFIG_MMC_CLKGATE
int clk_requests; /* internal reference counter */
@@ -302,6 +319,10 @@
struct mmc_async_req *areq; /* active async req */
+#ifdef CONFIG_FAIL_MMC_REQUEST
+ struct fault_attr fail_mmc_request;
+#endif
+
unsigned long private[0] ____cacheline_aligned;
};
@@ -330,6 +351,8 @@
extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
+extern int mmc_cache_ctrl(struct mmc_host *, u8);
+
static inline void mmc_signal_sdio_irq(struct mmc_host *host)
{
host->ops->enable_sdio_irq(host, 0);
@@ -394,4 +417,10 @@
{
return host->caps & MMC_CAP_CMD23;
}
+
+static inline int mmc_boot_partition_access(struct mmc_host *host)
+{
+ return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
+}
+
#endif /* LINUX_MMC_HOST_H */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 5a794cb..0e71356 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -270,18 +270,31 @@
* EXT_CSD fields
*/
+#define EXT_CSD_FLUSH_CACHE 32 /* W */
+#define EXT_CSD_CACHE_CTRL 33 /* R/W */
+#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
+#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
+#define EXT_CSD_HPI_MGMT 161 /* R/W */
+#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
+#define EXT_CSD_SANITIZE_START 165 /* W */
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_PART_CONFIG 179 /* R/W */
#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
+#define EXT_CSD_POWER_CLASS 187 /* R/W */
#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_STRUCTURE 194 /* RO */
#define EXT_CSD_CARD_TYPE 196 /* RO */
+#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */
#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */
+#define EXT_CSD_PWR_CL_52_195 200 /* RO */
+#define EXT_CSD_PWR_CL_26_195 201 /* RO */
+#define EXT_CSD_PWR_CL_52_360 202 /* RO */
+#define EXT_CSD_PWR_CL_26_360 203 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
#define EXT_CSD_REL_WR_SEC_C 222 /* RO */
@@ -293,6 +306,14 @@
#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
#define EXT_CSD_TRIM_MULT 232 /* RO */
+#define EXT_CSD_PWR_CL_200_195 236 /* RO */
+#define EXT_CSD_PWR_CL_200_360 237 /* RO */
+#define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */
+#define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */
+#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */
+#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
+#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
+#define EXT_CSD_HPI_FEATURES 503 /* RO */
/*
* EXT_CSD field definitions
@@ -302,7 +323,9 @@
#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7)
#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1)
-#define EXT_CSD_PART_CONFIG_ACC_BOOT1 (0x2)
+#define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4)
+
+#define EXT_CSD_PART_SUPPORT_PART_EN (0x1)
#define EXT_CSD_CMD_SET_NORMAL (1<<0)
#define EXT_CSD_CMD_SET_SECURE (1<<1)
@@ -327,7 +350,20 @@
#define EXT_CSD_SEC_ER_EN BIT(0)
#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
#define EXT_CSD_SEC_GB_CL_EN BIT(4)
+#define EXT_CSD_SEC_SANITIZE BIT(6) /* v4.5 only */
+#define EXT_CSD_RST_N_EN_MASK 0x3
+#define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */
+
+#define EXT_CSD_NO_POWER_NOTIFICATION 0
+#define EXT_CSD_POWER_ON 1
+#define EXT_CSD_POWER_OFF_SHORT 2
+#define EXT_CSD_POWER_OFF_LONG 3
+
+#define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_8BIT_SHIFT 4
+#define EXT_CSD_PWR_CL_4BIT_SHIFT 0
/*
* MMC_SWITCH access modes
*/
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 5666f3a..e4b6935 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -88,6 +88,10 @@
/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
+ unsigned int quirks2; /* More deviations from spec. */
+
+#define SDHCI_QUIRK2_OWN_CARD_DETECTION (1<<0)
+
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
@@ -115,6 +119,8 @@
#define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */
#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
+#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
+#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
unsigned int version; /* SDHCI spec. version */
@@ -125,6 +131,8 @@
unsigned int clock; /* Current clock (MHz) */
u8 pwr; /* Current voltage */
+ bool runtime_suspended; /* Host is runtime suspended */
+
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
struct mmc_data *data; /* Current data request */
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index 2a2e990..e0b1123 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -72,11 +72,13 @@
#define SDIO_CCCR_REV_1_00 0 /* CCCR/FBR Version 1.00 */
#define SDIO_CCCR_REV_1_10 1 /* CCCR/FBR Version 1.10 */
#define SDIO_CCCR_REV_1_20 2 /* CCCR/FBR Version 1.20 */
+#define SDIO_CCCR_REV_3_00 3 /* CCCR/FBR Version 3.00 */
#define SDIO_SDIO_REV_1_00 0 /* SDIO Spec Version 1.00 */
#define SDIO_SDIO_REV_1_10 1 /* SDIO Spec Version 1.10 */
#define SDIO_SDIO_REV_1_20 2 /* SDIO Spec Version 1.20 */
#define SDIO_SDIO_REV_2_00 3 /* SDIO Spec Version 2.00 */
+#define SDIO_SDIO_REV_3_00 4 /* SDIO Spec Version 3.00 */
#define SDIO_CCCR_SD 0x01
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index 0222cd8..04ff452 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -41,7 +41,9 @@
void (*set_pwr)(struct platform_device *pdev, int state);
void (*down_pwr)(struct platform_device *pdev);
int (*get_cd)(struct platform_device *pdef);
- struct sh_mmcif_dma *dma;
+ struct sh_mmcif_dma *dma; /* Deprecated. Instead */
+ unsigned int slave_id_tx; /* use embedded slave_id_[tr]x */
+ unsigned int slave_id_rx;
u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */
unsigned long caps;
u32 ocr;
diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
index bd50b36..71b8054 100644
--- a/include/linux/mmc/sh_mobile_sdhi.h
+++ b/include/linux/mmc/sh_mobile_sdhi.h
@@ -6,6 +6,10 @@
struct platform_device;
struct tmio_mmc_data;
+#define SH_MOBILE_SDHI_IRQ_CARD_DETECT "card_detect"
+#define SH_MOBILE_SDHI_IRQ_SDCARD "sdcard"
+#define SH_MOBILE_SDHI_IRQ_SDIO "sdio"
+
struct sh_mobile_sdhi_info {
int dma_slave_tx;
int dma_slave_rx;
diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h
index 97491f7..c5d5278 100644
--- a/include/linux/mmiotrace.h
+++ b/include/linux/mmiotrace.h
@@ -49,8 +49,7 @@
extern void mmiotrace_iounmap(volatile void __iomem *addr);
/* For anyone to insert markers. Remember trailing newline. */
-extern int mmiotrace_printk(const char *fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
+extern __printf(1, 2) int mmiotrace_printk(const char *fmt, ...);
#else /* !CONFIG_MMIOTRACE: */
static inline int is_kmmio_active(void)
{
@@ -71,10 +70,7 @@
{
}
-static inline int mmiotrace_printk(const char *fmt, ...)
- __attribute__ ((format (printf, 1, 0)));
-
-static inline int mmiotrace_printk(const char *fmt, ...)
+static inline __printf(1, 2) int mmiotrace_printk(const char *fmt, ...)
{
return 0;
}
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index be1ac8d..188cb2f 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -100,6 +100,7 @@
NR_UNSTABLE_NFS, /* NFS unstable pages */
NR_BOUNCE,
NR_VMSCAN_WRITE,
+ NR_VMSCAN_IMMEDIATE, /* Prioritise for reclaim when writeback ends */
NR_WRITEBACK_TEMP, /* Writeback using temporary buffers */
NR_ISOLATED_ANON, /* Temporary isolated pages from anon lru */
NR_ISOLATED_FILE, /* Temporary isolated pages from file lru */
@@ -164,6 +165,18 @@
#define LRU_ALL_EVICTABLE (LRU_ALL_FILE | LRU_ALL_ANON)
#define LRU_ALL ((1 << NR_LRU_LISTS) - 1)
+/* Isolate inactive pages */
+#define ISOLATE_INACTIVE ((__force isolate_mode_t)0x1)
+/* Isolate active pages */
+#define ISOLATE_ACTIVE ((__force isolate_mode_t)0x2)
+/* Isolate clean file */
+#define ISOLATE_CLEAN ((__force isolate_mode_t)0x4)
+/* Isolate unmapped file */
+#define ISOLATE_UNMAPPED ((__force isolate_mode_t)0x8)
+
+/* LRU Isolation modes. */
+typedef unsigned __bitwise__ isolate_mode_t;
+
enum zone_watermarks {
WMARK_MIN,
WMARK_LOW,
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 409328d..ffc0213 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -67,6 +67,7 @@
#define LOOKUP_EMPTY 0x4000
extern int user_path_at(int, const char __user *, unsigned, struct path *);
+extern int user_path_at_empty(int, const char __user *, unsigned, struct path *, int *empty);
#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path)
#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index df1c836..cbeb586 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2622,23 +2622,23 @@
extern int __netdev_printk(const char *level, const struct net_device *dev,
struct va_format *vaf);
-extern int netdev_printk(const char *level, const struct net_device *dev,
- const char *format, ...)
- __attribute__ ((format (printf, 3, 4)));
-extern int netdev_emerg(const struct net_device *dev, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int netdev_alert(const struct net_device *dev, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int netdev_crit(const struct net_device *dev, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int netdev_err(const struct net_device *dev, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int netdev_warn(const struct net_device *dev, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int netdev_notice(const struct net_device *dev, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int netdev_info(const struct net_device *dev, const char *format, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(3, 4)
+int netdev_printk(const char *level, const struct net_device *dev,
+ const char *format, ...);
+extern __printf(2, 3)
+int netdev_emerg(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_alert(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_crit(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_err(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_warn(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_notice(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_info(const struct net_device *dev, const char *format, ...);
#define MODULE_ALIAS_NETDEV(device) \
MODULE_ALIAS("netdev-" device)
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 8180cd9..8374d29 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -25,6 +25,7 @@
#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */
#define NETLINK_ECRYPTFS 19
#define NETLINK_RDMA 20
+#define NETLINK_CRYPTO 21 /* Crypto layer */
#define MAX_LINKS 32
diff --git a/include/linux/of.h b/include/linux/of.h
index 9180dc5..f01ba8a 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -17,6 +17,7 @@
*/
#include <linux/types.h>
#include <linux/bitops.h>
+#include <linux/errno.h>
#include <linux/kref.h>
#include <linux/mod_devicetable.h>
#include <linux/spinlock.h>
@@ -68,6 +69,7 @@
/* Pointer for first entry in chain of all nodes. */
extern struct device_node *allnodes;
extern struct device_node *of_chosen;
+extern struct device_node *of_aliases;
extern rwlock_t devtree_lock;
static inline bool of_have_populated_dt(void)
@@ -199,16 +201,26 @@
const char *propname,
u32 *out_values,
size_t sz);
+extern int of_property_read_u64(const struct device_node *np,
+ const char *propname, u64 *out_value);
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output);
+extern int of_property_count_strings(struct device_node *np,
+ const char *propname);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
extern const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp);
+#define for_each_property(pp, properties) \
+ for (pp = properties; pp != NULL; pp = pp->next)
+
extern int of_n_addr_cells(struct device_node *np);
extern int of_n_size_cells(struct device_node *np);
extern const struct of_device_id *of_match_node(
@@ -221,6 +233,9 @@
const char *list_name, const char *cells_name, int index,
struct device_node **out_node, const void **out_args);
+extern void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align));
+extern int of_alias_get_id(struct device_node *np, const char *stem);
+
extern int of_machine_is_compatible(const char *compat);
extern int prom_add_property(struct device_node* np, struct property* prop);
@@ -235,6 +250,7 @@
extern void of_detach_node(struct device_node *);
#endif
+#define of_match_ptr(_ptr) (_ptr)
#else /* CONFIG_OF */
static inline bool of_have_populated_dt(void)
@@ -242,6 +258,22 @@
return false;
}
+#define for_each_child_of_node(parent, child) \
+ while (0)
+
+static inline int of_device_is_compatible(const struct device_node *device,
+ const char *name)
+{
+ return 0;
+}
+
+static inline struct property *of_find_property(const struct device_node *np,
+ const char *name,
+ int *lenp)
+{
+ return NULL;
+}
+
static inline int of_property_read_u32_array(const struct device_node *np,
const char *propname,
u32 *out_values, size_t sz)
@@ -256,6 +288,19 @@
return -ENOSYS;
}
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname, int index,
+ const char **out_string)
+{
+ return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return -ENOSYS;
+}
+
static inline const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp)
@@ -263,6 +308,21 @@
return NULL;
}
+static inline int of_property_read_u64(const struct device_node *np,
+ const char *propname, u64 *out_value)
+{
+ return -ENOSYS;
+}
+
+static inline struct device_node *of_parse_phandle(struct device_node *np,
+ const char *phandle_name,
+ int index)
+{
+ return NULL;
+}
+
+#define of_match_ptr(_ptr) NULL
+#define of_match_node(_matches, _node) NULL
#endif /* CONFIG_OF */
static inline int of_property_read_u32(const struct device_node *np,
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index cd2e61c..d0307ee 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -33,6 +33,8 @@
u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
};
+typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
+
/*
* Workarounds only applied to 32bit powermac machines
*/
@@ -73,6 +75,7 @@
struct resource *res, int nr_irqs);
extern struct device_node *of_irq_find_parent(struct device_node *child);
+extern void of_irq_init(const struct of_device_id *matches);
#endif /* CONFIG_OF_IRQ */
#endif /* CONFIG_OF */
diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h
index b6111f8..c73a34c 100644
--- a/include/linux/omap3isp.h
+++ b/include/linux/omap3isp.h
@@ -62,14 +62,12 @@
* V4L2_EVENT_OMAP3ISP_AEWB: AEWB statistics data ready
* V4L2_EVENT_OMAP3ISP_AF: AF statistics data ready
* V4L2_EVENT_OMAP3ISP_HIST: Histogram statistics data ready
- * V4L2_EVENT_OMAP3ISP_HS_VS: Horizontal/vertical synchronization detected
*/
#define V4L2_EVENT_OMAP3ISP_CLASS (V4L2_EVENT_PRIVATE_START | 0x100)
#define V4L2_EVENT_OMAP3ISP_AEWB (V4L2_EVENT_OMAP3ISP_CLASS | 0x1)
#define V4L2_EVENT_OMAP3ISP_AF (V4L2_EVENT_OMAP3ISP_CLASS | 0x2)
#define V4L2_EVENT_OMAP3ISP_HIST (V4L2_EVENT_OMAP3ISP_CLASS | 0x3)
-#define V4L2_EVENT_OMAP3ISP_HS_VS (V4L2_EVENT_OMAP3ISP_CLASS | 0x4)
struct omap3isp_stat_event_status {
__u32 frame_number;
diff --git a/include/linux/oom.h b/include/linux/oom.h
index 13b7b02..6f9d04a 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -40,6 +40,7 @@
CONSTRAINT_MEMCG,
};
+extern void compare_swap_oom_score_adj(int old_val, int new_val);
extern int test_set_oom_score_adj(int new_val);
extern unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem,
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index 655824f..e3d0b38 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -1,6 +1,8 @@
#ifndef LINUX_PCI_ATS_H
#define LINUX_PCI_ATS_H
+#include <linux/pci.h>
+
/* Address Translation Service */
struct pci_ats {
int pos; /* capability position */
@@ -15,6 +17,7 @@
extern int pci_enable_ats(struct pci_dev *dev, int ps);
extern void pci_disable_ats(struct pci_dev *dev);
extern int pci_ats_queue_depth(struct pci_dev *dev);
+
/**
* pci_ats_enabled - query the ATS status
* @dev: the PCI device
@@ -49,4 +52,76 @@
#endif /* CONFIG_PCI_IOV */
+#ifdef CONFIG_PCI_PRI
+
+extern int pci_enable_pri(struct pci_dev *pdev, u32 reqs);
+extern void pci_disable_pri(struct pci_dev *pdev);
+extern bool pci_pri_enabled(struct pci_dev *pdev);
+extern int pci_reset_pri(struct pci_dev *pdev);
+extern bool pci_pri_stopped(struct pci_dev *pdev);
+extern int pci_pri_status(struct pci_dev *pdev);
+
+#else /* CONFIG_PCI_PRI */
+
+static inline int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
+{
+ return -ENODEV;
+}
+
+static inline void pci_disable_pri(struct pci_dev *pdev)
+{
+}
+
+static inline bool pci_pri_enabled(struct pci_dev *pdev)
+{
+ return false;
+}
+
+static inline int pci_reset_pri(struct pci_dev *pdev)
+{
+ return -ENODEV;
+}
+
+static inline bool pci_pri_stopped(struct pci_dev *pdev)
+{
+ return true;
+}
+
+static inline int pci_pri_status(struct pci_dev *pdev)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_PCI_PRI */
+
+#ifdef CONFIG_PCI_PASID
+
+extern int pci_enable_pasid(struct pci_dev *pdev, int features);
+extern void pci_disable_pasid(struct pci_dev *pdev);
+extern int pci_pasid_features(struct pci_dev *pdev);
+extern int pci_max_pasids(struct pci_dev *pdev);
+
+#else /* CONFIG_PCI_PASID */
+
+static inline int pci_enable_pasid(struct pci_dev *pdev, int features)
+{
+ return -EINVAL;
+}
+
+static inline void pci_disable_pasid(struct pci_dev *pdev)
+{
+}
+
+static inline int pci_pasid_features(struct pci_dev *pdev)
+{
+ return -EINVAL;
+}
+
+static inline int pci_max_pasids(struct pci_dev *pdev)
+{
+ return -EINVAL;
+}
+
+#endif /* CONFIG_PCI_PASID */
+
+
#endif /* LINUX_PCI_ATS_H*/
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f1b1ca1..337df0d5 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -275,6 +275,7 @@
unsigned int pme_support:5; /* Bitmask of states from which PME#
can be generated */
unsigned int pme_interrupt:1;
+ unsigned int pme_poll:1; /* Poll device's PME status bit */
unsigned int d1_support:1; /* Low power state D1 is supported */
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* Only allow D0 and D3 */
@@ -957,6 +958,7 @@
int pci_cfg_space_size_ext(struct pci_dev *dev);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
+void pci_setup_bridge(struct pci_bus *bus);
#define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0)
#define PCI_VGA_STATE_CHANGE_DECODES (1 << 1)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ae96bbe..1679ff6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2302,6 +2302,11 @@
#define PCI_DEVICE_ID_RENESAS_SH7785 0x0007
#define PCI_DEVICE_ID_RENESAS_SH7786 0x0010
+#define PCI_VENDOR_ID_SOLARFLARE 0x1924
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0 0x0703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1 0x6703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B 0x0710
+
#define PCI_VENDOR_ID_TDI 0x192E
#define PCI_DEVICE_ID_TDI_EHCI 0x0101
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index e884096..b5d9657 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -663,6 +663,26 @@
#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */
#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */
+/* Page Request Interface */
+#define PCI_PRI_CAP 0x13 /* PRI capability ID */
+#define PCI_PRI_CONTROL_OFF 0x04 /* Offset of control register */
+#define PCI_PRI_STATUS_OFF 0x06 /* Offset of status register */
+#define PCI_PRI_ENABLE 0x0001 /* Enable mask */
+#define PCI_PRI_RESET 0x0002 /* Reset bit mask */
+#define PCI_PRI_STATUS_RF 0x0001 /* Request Failure */
+#define PCI_PRI_STATUS_UPRGI 0x0002 /* Unexpected PRG index */
+#define PCI_PRI_STATUS_STOPPED 0x0100 /* PRI Stopped */
+#define PCI_PRI_MAX_REQ_OFF 0x08 /* Cap offset for max reqs supported */
+#define PCI_PRI_ALLOC_REQ_OFF 0x0c /* Cap offset for max reqs allowed */
+
+/* PASID capability */
+#define PCI_PASID_CAP 0x1b /* PASID capability ID */
+#define PCI_PASID_CAP_OFF 0x04 /* PASID feature register */
+#define PCI_PASID_CONTROL_OFF 0x06 /* PASID control register */
+#define PCI_PASID_ENABLE 0x01 /* Enable/Supported bit */
+#define PCI_PASID_EXEC 0x02 /* Exec permissions Enable/Supported */
+#define PCI_PASID_PRIV 0x04 /* Priviledge Mode Enable/Support */
+
/* Single Root I/O Virtualization */
#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */
diff --git a/include/linux/platform_data/leds-renesas-tpu.h b/include/linux/platform_data/leds-renesas-tpu.h
new file mode 100644
index 0000000..0553870
--- /dev/null
+++ b/include/linux/platform_data/leds-renesas-tpu.h
@@ -0,0 +1,14 @@
+#ifndef __LEDS_RENESAS_TPU_H__
+#define __LEDS_RENESAS_TPU_H__
+
+struct led_renesas_tpu_config {
+ char *name;
+ unsigned pin_gpio_fn;
+ unsigned pin_gpio;
+ unsigned int channel_offset;
+ unsigned int timer_bit;
+ unsigned int max_brightness;
+ unsigned int refresh_rate;
+};
+
+#endif /* __LEDS_RENESAS_TPU_H__ */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 651a066..2a23f7d 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -190,6 +190,23 @@
dev_set_drvdata(&pdev->dev, data);
}
+/* module_platform_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit. This eliminates a lot of
+ * boilerplate. Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_platform_driver(__platform_driver) \
+static int __init __platform_driver##_init(void) \
+{ \
+ return platform_driver_register(&(__platform_driver)); \
+} \
+module_init(__platform_driver##_init); \
+static void __exit __platform_driver##_exit(void) \
+{ \
+ platform_driver_unregister(&(__platform_driver)); \
+} \
+module_exit(__platform_driver##_exit);
+
extern struct platform_device *platform_create_bundle(struct platform_driver *driver,
int (*probe)(struct platform_device *),
struct resource *res, unsigned int n_res,
diff --git a/include/linux/pps-gpio.h b/include/linux/pps-gpio.h
new file mode 100644
index 0000000..0035abe
--- /dev/null
+++ b/include/linux/pps-gpio.h
@@ -0,0 +1,32 @@
+/*
+ * pps-gpio.h -- PPS client for GPIOs
+ *
+ *
+ * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PPS_GPIO_H
+#define _PPS_GPIO_H
+
+struct pps_gpio_platform_data {
+ bool assert_falling_edge;
+ bool capture_clear;
+ unsigned int gpio_pin;
+ const char *gpio_label;
+};
+
+#endif
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 0101d55..f0e22f7 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -82,22 +82,22 @@
* Dummy printk for disabled debugging statements to use whilst maintaining
* gcc's format and side-effect checking.
*/
-static inline __attribute__ ((format (printf, 1, 2)))
+static inline __printf(1, 2)
int no_printk(const char *fmt, ...)
{
return 0;
}
-extern asmlinkage __attribute__ ((format (printf, 1, 2)))
+extern asmlinkage __printf(1, 2)
void early_printk(const char *fmt, ...);
extern int printk_needs_cpu(int cpu);
extern void printk_tick(void);
#ifdef CONFIG_PRINTK
-asmlinkage __attribute__ ((format (printf, 1, 0)))
+asmlinkage __printf(1, 0)
int vprintk(const char *fmt, va_list args);
-asmlinkage __attribute__ ((format (printf, 1, 2))) __cold
+asmlinkage __printf(1, 2) __cold
int printk(const char *fmt, ...);
/*
@@ -117,12 +117,12 @@
void log_buf_kexec_setup(void);
void __init setup_log_buf(int early);
#else
-static inline __attribute__ ((format (printf, 1, 0)))
+static inline __printf(1, 0)
int vprintk(const char *s, va_list args)
{
return 0;
}
-static inline __attribute__ ((format (printf, 1, 2))) __cold
+static inline __printf(1, 2) __cold
int printk(const char *s, ...)
{
return 0;
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index cc03bbf..ea56732 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -32,15 +32,15 @@
struct pstore_info {
struct module *owner;
char *name;
- struct mutex buf_mutex; /* serialize access to 'buf' */
+ spinlock_t buf_lock; /* serialize access to 'buf' */
char *buf;
size_t bufsize;
int (*open)(struct pstore_info *psi);
int (*close)(struct pstore_info *psi);
ssize_t (*read)(u64 *id, enum pstore_type_id *type,
struct timespec *time, struct pstore_info *psi);
- u64 (*write)(enum pstore_type_id type, unsigned int part,
- size_t size, struct pstore_info *psi);
+ int (*write)(enum pstore_type_id type, u64 *id,
+ unsigned int part, size_t size, struct pstore_info *psi);
int (*erase)(enum pstore_type_id type, u64 id,
struct pstore_info *psi);
void *data;
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 26f9e36..d93f95e 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -31,7 +31,7 @@
#define quota_error(sb, fmt, args...) \
__quota_error((sb), __func__, fmt , ## args)
-extern __attribute__((format (printf, 3, 4)))
+extern __printf(3, 4)
void __quota_error(struct super_block *sb, const char *func,
const char *fmt, ...);
diff --git a/include/linux/random.h b/include/linux/random.h
index d13059f3..8f74538 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -91,6 +91,19 @@
state->s3 = __seed(i, 15);
}
+#ifdef CONFIG_ARCH_RANDOM
+# include <asm/archrandom.h>
+#else
+static inline int arch_get_random_long(unsigned long *v)
+{
+ return 0;
+}
+static inline int arch_get_random_int(unsigned int *v)
+{
+ return 0;
+}
+#endif
+
#endif /* __KERNEL___ */
#endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index b47771a..f7756d1 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -141,6 +141,7 @@
int regulator_disable(struct regulator *regulator);
int regulator_force_disable(struct regulator *regulator);
int regulator_is_enabled(struct regulator *regulator);
+int regulator_disable_deferred(struct regulator *regulator, int ms);
int regulator_bulk_get(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers);
@@ -211,6 +212,12 @@
return 0;
}
+static inline int regulator_disable_deferred(struct regulator *regulator,
+ int ms)
+{
+ return 0;
+}
+
static inline int regulator_is_enabled(struct regulator *regulator)
{
return 1;
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 1a80bc7..12a1aa0 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -199,6 +199,9 @@
struct regulation_constraints *constraints;
struct regulator *supply; /* for tree */
+ struct delayed_work disable_work;
+ int deferred_disables;
+
void *reg_data; /* regulator_dev data */
#ifdef CONFIG_DEBUG_FS
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
new file mode 100644
index 0000000..19fbd267
--- /dev/null
+++ b/include/linux/regulator/gpio-regulator.h
@@ -0,0 +1,87 @@
+/*
+ * gpio-regulator.h
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_GPIO_H
+#define __REGULATOR_GPIO_H
+
+struct regulator_init_data;
+
+enum regulator_type;
+
+/**
+ * struct gpio_regulator_state - state description
+ * @value: microvolts or microamps
+ * @gpios: bitfield of gpio target-states for the value
+ *
+ * This structure describes a supported setting of the regulator
+ * and the necessary gpio-state to achieve it.
+ *
+ * The n-th bit in the bitfield describes the state of the n-th GPIO
+ * from the gpios-array defined in gpio_regulator_config below.
+ */
+struct gpio_regulator_state {
+ int value;
+ int gpios;
+};
+
+/**
+ * struct gpio_regulator_config - config structure
+ * @supply_name: Name of the regulator supply
+ * @enable_gpio: GPIO to use for enable control
+ * set to -EINVAL if not used
+ * @enable_high: Polarity of enable GPIO
+ * 1 = Active high, 0 = Active low
+ * @enabled_at_boot: Whether regulator has been enabled at
+ * boot or not. 1 = Yes, 0 = No
+ * This is used to keep the regulator at
+ * the default state
+ * @startup_delay: Start-up time in microseconds
+ * @gpios: Array containing the gpios needed to control
+ * the setting of the regulator
+ * @nr_gpios: Number of gpios
+ * @states: Array of gpio_regulator_state entries describing
+ * the gpio state for specific voltages
+ * @nr_states: Number of states available
+ * @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE
+ * @init_data: regulator_init_data
+ *
+ * This structure contains gpio-voltage regulator configuration
+ * information that must be passed by platform code to the
+ * gpio-voltage regulator driver.
+ */
+struct gpio_regulator_config {
+ const char *supply_name;
+
+ int enable_gpio;
+ unsigned enable_high:1;
+ unsigned enabled_at_boot:1;
+ unsigned startup_delay;
+
+ struct gpio *gpios;
+ int nr_gpios;
+
+ struct gpio_regulator_state *states;
+ int nr_states;
+
+ enum regulator_type type;
+ struct regulator_init_data *init_data;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index ce3127a..f3f13fd 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -95,7 +95,7 @@
*/
struct regulation_constraints {
- char *name;
+ const char *name;
/* voltage output range (inclusive) - for voltage control */
int min_uV;
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
index 0cee015..b66d13d 100644
--- a/include/linux/rio_ids.h
+++ b/include/linux/rio_ids.h
@@ -39,5 +39,6 @@
#define RIO_DID_IDTCPS1616 0x0379
#define RIO_DID_IDTVPS1616 0x0377
#define RIO_DID_IDTSPS1616 0x0378
+#define RIO_DID_TSI721 0x80ab
#endif /* LINUX_RIO_IDS_H */
diff --git a/include/linux/rtc/sirfsoc_rtciobrg.h b/include/linux/rtc/sirfsoc_rtciobrg.h
new file mode 100644
index 0000000..2c92e1c
--- /dev/null
+++ b/include/linux/rtc/sirfsoc_rtciobrg.h
@@ -0,0 +1,18 @@
+/*
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+#ifndef _SIRFSOC_RTC_IOBRG_H_
+#define _SIRFSOC_RTC_IOBRG_H_
+
+extern void sirfsoc_rtc_iobrg_besyncing(void);
+
+extern u32 sirfsoc_rtc_iobrg_readl(u32 addr);
+
+extern void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr);
+
+#endif
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 1feb2de..10d6b226 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -83,13 +83,6 @@
struct task_struct;
-/* One semaphore structure for each semaphore in the system. */
-struct sem {
- int semval; /* current value */
- int sempid; /* pid of last operation */
- struct list_head sem_pending; /* pending single-sop operations */
-};
-
/* One sem_array data structure for each set of semaphores in the system. */
struct sem_array {
struct kern_ipc_perm ____cacheline_aligned_in_smp
@@ -103,51 +96,21 @@
int complex_count; /* pending complex operations */
};
-/* One queue for each sleeping process in the system. */
-struct sem_queue {
- struct list_head simple_list; /* queue of pending operations */
- struct list_head list; /* queue of pending operations */
- struct task_struct *sleeper; /* this process */
- struct sem_undo *undo; /* undo structure */
- int pid; /* process id of requesting process */
- int status; /* completion status of operation */
- struct sembuf *sops; /* array of pending operations */
- int nsops; /* number of operations */
- int alter; /* does the operation alter the array? */
-};
-
-/* Each task has a list of undo requests. They are executed automatically
- * when the process exits.
- */
-struct sem_undo {
- struct list_head list_proc; /* per-process list: all undos from one process. */
- /* rcu protected */
- struct rcu_head rcu; /* rcu struct for sem_undo() */
- struct sem_undo_list *ulp; /* sem_undo_list for the process */
- struct list_head list_id; /* per semaphore array list: all undos for one array */
- int semid; /* semaphore set identifier */
- short * semadj; /* array of adjustments, one per semaphore */
-};
-
-/* sem_undo_list controls shared access to the list of sem_undo structures
- * that may be shared among all a CLONE_SYSVSEM task group.
- */
-struct sem_undo_list {
- atomic_t refcnt;
- spinlock_t lock;
- struct list_head list_proc;
-};
+#ifdef CONFIG_SYSVIPC
struct sysv_sem {
struct sem_undo_list *undo_list;
};
-#ifdef CONFIG_SYSVIPC
-
extern int copy_semundo(unsigned long clone_flags, struct task_struct *tsk);
extern void exit_sem(struct task_struct *tsk);
#else
+
+struct sysv_sem {
+ /* empty */
+};
+
static inline int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
{
return 0;
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index be720cd..0b69a46 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -84,8 +84,7 @@
int seq_puts(struct seq_file *m, const char *s);
int seq_write(struct seq_file *seq, const void *data, size_t len);
-int seq_printf(struct seq_file *, const char *, ...)
- __attribute__ ((format (printf,2,3)));
+__printf(2, 3) int seq_printf(struct seq_file *, const char *, ...);
int seq_path(struct seq_file *, struct path *, char *);
int seq_dentry(struct seq_file *, struct dentry *, char *);
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e26f478..be7dfb0 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -199,5 +199,6 @@
#define SERIO_DYNAPRO 0x3a
#define SERIO_HAMPSHIRE 0x3b
#define SERIO_PS2MULT 0x3c
+#define SERIO_TSC40 0x3d
#endif
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index 30cae70..bc8c920 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -61,6 +61,14 @@
.reg = r, .reg_width = r_width, \
.enum_ids = (pinmux_enum_t [r_width]) \
+struct pinmux_irq {
+ int irq;
+ pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_IRQ(irq_nr, ids...) \
+ { .irq = irq_nr, .enum_ids = (pinmux_enum_t []) { ids, 0 } } \
+
struct pinmux_range {
pinmux_enum_t begin;
pinmux_enum_t end;
@@ -87,7 +95,9 @@
pinmux_enum_t *gpio_data;
unsigned int gpio_data_size;
- unsigned long *gpio_in_use;
+ struct pinmux_irq *gpio_irq;
+ unsigned int gpio_irq_size;
+
struct gpio_chip chip;
};
diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h
index 790651b..a83833a 100644
--- a/include/linux/shrinker.h
+++ b/include/linux/shrinker.h
@@ -20,6 +20,7 @@
* 'nr_to_scan' entries and attempt to free them up. It should return
* the number of objects which remain in the cache. If it returns -1, it means
* it cannot do any scanning at this time (eg. there is a risk of deadlock).
+ * The callback must not return -1 if nr_to_scan is zero.
*
* The 'gfpmask' refers to the allocation we are currently trying to
* fulfil.
diff --git a/include/linux/spi/l4f00242t03.h b/include/linux/spi/l4f00242t03.h
index aee1dbd..bc8677c 100644
--- a/include/linux/spi/l4f00242t03.h
+++ b/include/linux/spi/l4f00242t03.h
@@ -24,8 +24,6 @@
struct l4f00242t03_pdata {
unsigned int reset_gpio;
unsigned int data_enable_gpio;
- const char *io_supply; /* will be set to 1.8 V */
- const char *core_supply; /* will be set to 2.8 V */
};
#endif /* _INCLUDE_LINUX_SPI_L4F00242T03_H_ */
diff --git a/include/linux/string.h b/include/linux/string.h
index a176db2..e033564 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -114,6 +114,7 @@
#ifndef __HAVE_ARCH_MEMCHR
extern void * memchr(const void *,int,__kernel_size_t);
#endif
+void *memchr_inv(const void *s, int c, size_t n);
extern char *kstrdup(const char *s, gfp_t gfp);
extern char *kstrndup(const char *s, size_t len, gfp_t gfp);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index c71f84b..1e22e12 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -243,15 +243,10 @@
__lru_cache_add(page, LRU_INACTIVE_FILE);
}
-/* LRU Isolation modes. */
-#define ISOLATE_INACTIVE 0 /* Isolate inactive pages. */
-#define ISOLATE_ACTIVE 1 /* Isolate active pages. */
-#define ISOLATE_BOTH 2 /* Isolate both active and inactive pages. */
-
/* linux/mm/vmscan.c */
extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
gfp_t gfp_mask, nodemask_t *mask);
-extern int __isolate_lru_page(struct page *page, int mode, int file);
+extern int __isolate_lru_page(struct page *page, isolate_mode_t mode, int file);
extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
gfp_t gfp_mask, bool noswap);
extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 1ff0ec2..86a24b11 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -844,4 +844,17 @@
struct file_handle __user *handle,
int flags);
asmlinkage long sys_setns(int fd, int nstype);
+asmlinkage long sys_process_vm_readv(pid_t pid,
+ const struct iovec __user *lvec,
+ unsigned long liovcnt,
+ const struct iovec __user *rvec,
+ unsigned long riovcnt,
+ unsigned long flags);
+asmlinkage long sys_process_vm_writev(pid_t pid,
+ const struct iovec __user *lvec,
+ unsigned long liovcnt,
+ const struct iovec __user *rvec,
+ unsigned long riovcnt,
+ unsigned long flags);
+
#endif
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 9a1ec10..703cfa3 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -931,6 +931,7 @@
#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/rcupdate.h>
+#include <linux/wait.h>
/* For the /proc/sys support */
struct ctl_table;
@@ -1011,6 +1012,26 @@
* cover common cases.
*/
+/* Support for userspace poll() to watch for changes */
+struct ctl_table_poll {
+ atomic_t event;
+ wait_queue_head_t wait;
+};
+
+static inline void *proc_sys_poll_event(struct ctl_table_poll *poll)
+{
+ return (void *)(unsigned long)atomic_read(&poll->event);
+}
+
+void proc_sys_poll_notify(struct ctl_table_poll *poll);
+
+#define __CTL_TABLE_POLL_INITIALIZER(name) { \
+ .event = ATOMIC_INIT(0), \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait) }
+
+#define DEFINE_CTL_TABLE_POLL(name) \
+ struct ctl_table_poll name = __CTL_TABLE_POLL_INITIALIZER(name)
+
/* A sysctl table is an array of struct ctl_table: */
struct ctl_table
{
@@ -1021,6 +1042,7 @@
struct ctl_table *child;
struct ctl_table *parent; /* Automatically set */
proc_handler *proc_handler; /* Callback for text formatting */
+ struct ctl_table_poll *poll;
void *extra1;
void *extra2;
};
diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h
index 5cf397c..7dadc3d 100644
--- a/include/linux/trace_seq.h
+++ b/include/linux/trace_seq.h
@@ -29,10 +29,10 @@
* Currently only defined when tracing is enabled.
*/
#ifdef CONFIG_TRACING
-extern int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
-extern int trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args)
- __attribute__ ((format (printf, 2, 0)));
+extern __printf(2, 3)
+int trace_seq_printf(struct trace_seq *s, const char *fmt, ...);
+extern __printf(2, 0)
+int trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args);
extern int
trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
extern int trace_print_seq(struct seq_file *m, struct trace_seq *s);
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index d28c726..2aa2881 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -68,7 +68,7 @@
unsigned char head;
unsigned char tail;
struct input_event buff[UINPUT_BUFFER_SIZE];
- int ff_effects_max;
+ unsigned int ff_effects_max;
struct uinput_request *requests[UINPUT_NUM_REQUESTS];
wait_queue_head_t requests_waitq;
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
index ed91fb6..b607f35 100644
--- a/include/linux/usb/Kbuild
+++ b/include/linux/usb/Kbuild
@@ -7,3 +7,4 @@
header-y += midi.h
header-y += g_printer.h
header-y += tmc.h
+header-y += video.h
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index f32a64e5..d5da6c6 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -383,12 +383,6 @@
#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
#define USB_ENDPOINT_DIR_MASK 0x80
-#define USB_ENDPOINT_SYNCTYPE 0x0c
-#define USB_ENDPOINT_SYNC_NONE (0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
-
#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
#define USB_ENDPOINT_XFER_CONTROL 0
#define USB_ENDPOINT_XFER_ISOC 1
@@ -396,6 +390,17 @@
#define USB_ENDPOINT_XFER_INT 3
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
+
/*-------------------------------------------------------------------------*/
/**
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index 4e5b021..c714ed7 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -37,6 +37,14 @@
#include <linux/nsproxy.h>
#include <linux/err.h>
+enum uts_proc {
+ UTS_PROC_OSTYPE,
+ UTS_PROC_OSRELEASE,
+ UTS_PROC_VERSION,
+ UTS_PROC_HOSTNAME,
+ UTS_PROC_DOMAINNAME,
+};
+
struct user_namespace;
extern struct user_namespace init_user_ns;
@@ -80,6 +88,14 @@
}
#endif
+#ifdef CONFIG_PROC_SYSCTL
+extern void uts_proc_notify(enum uts_proc proc);
+#else
+static inline void uts_proc_notify(enum uts_proc proc)
+{
+}
+#endif
+
static inline struct new_utsname *utsname(void)
{
return ¤t->nsproxy->uts_ns->name;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index fca24cc..225560c 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -759,10 +759,10 @@
#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400)
#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800)
-#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000)
-#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000)
+#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) /* BTSC */
+#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) /* EIA-J */
#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000)
+#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) /* FM A2 */
#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000)
#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000)
@@ -786,47 +786,86 @@
v4l2-common.c should be fixed.
*/
-/* some merged standards */
-#define V4L2_STD_MN (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC)
-#define V4L2_STD_B (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B)
-#define V4L2_STD_GH (V4L2_STD_PAL_G|V4L2_STD_PAL_H|V4L2_STD_SECAM_G|V4L2_STD_SECAM_H)
-#define V4L2_STD_DK (V4L2_STD_PAL_DK|V4L2_STD_SECAM_DK)
+/*
+ * Some macros to merge video standards in order to make live easier for the
+ * drivers and V4L2 applications
+ */
-/* some common needed stuff */
-#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\
- V4L2_STD_PAL_B1 |\
- V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\
- V4L2_STD_PAL_D1 |\
- V4L2_STD_PAL_K)
-#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\
- V4L2_STD_PAL_DK |\
- V4L2_STD_PAL_H |\
- V4L2_STD_PAL_I)
+/*
+ * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
+ * Missing here.
+ */
#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\
V4L2_STD_NTSC_M_JP |\
V4L2_STD_NTSC_M_KR)
+/* Secam macros */
#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\
V4L2_STD_SECAM_K |\
V4L2_STD_SECAM_K1)
+/* All Secam Standards */
#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\
V4L2_STD_SECAM_G |\
V4L2_STD_SECAM_H |\
V4L2_STD_SECAM_DK |\
V4L2_STD_SECAM_L |\
V4L2_STD_SECAM_LC)
+/* PAL macros */
+#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\
+ V4L2_STD_PAL_B1 |\
+ V4L2_STD_PAL_G)
+#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\
+ V4L2_STD_PAL_D1 |\
+ V4L2_STD_PAL_K)
+/*
+ * "Common" PAL - This macro is there to be compatible with the old
+ * V4L1 concept of "PAL": /BGDKHI.
+ * Several PAL standards are mising here: /M, /N and /Nc
+ */
+#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\
+ V4L2_STD_PAL_DK |\
+ V4L2_STD_PAL_H |\
+ V4L2_STD_PAL_I)
+/* Chroma "agnostic" standards */
+#define V4L2_STD_B (V4L2_STD_PAL_B |\
+ V4L2_STD_PAL_B1 |\
+ V4L2_STD_SECAM_B)
+#define V4L2_STD_G (V4L2_STD_PAL_G |\
+ V4L2_STD_SECAM_G)
+#define V4L2_STD_H (V4L2_STD_PAL_H |\
+ V4L2_STD_SECAM_H)
+#define V4L2_STD_L (V4L2_STD_SECAM_L |\
+ V4L2_STD_SECAM_LC)
+#define V4L2_STD_GH (V4L2_STD_G |\
+ V4L2_STD_H)
+#define V4L2_STD_DK (V4L2_STD_PAL_DK |\
+ V4L2_STD_SECAM_DK)
+#define V4L2_STD_BG (V4L2_STD_B |\
+ V4L2_STD_G)
+#define V4L2_STD_MN (V4L2_STD_PAL_M |\
+ V4L2_STD_PAL_N |\
+ V4L2_STD_PAL_Nc |\
+ V4L2_STD_NTSC)
+/* Standards where MTS/BTSC stereo could be found */
+#define V4L2_STD_MTS (V4L2_STD_NTSC_M |\
+ V4L2_STD_PAL_M |\
+ V4L2_STD_PAL_N |\
+ V4L2_STD_PAL_Nc)
+
+/* Standards for Countries with 60Hz Line frequency */
#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\
V4L2_STD_PAL_60 |\
V4L2_STD_NTSC |\
V4L2_STD_NTSC_443)
+/* Standards for Countries with 50Hz Line frequency */
#define V4L2_STD_625_50 (V4L2_STD_PAL |\
V4L2_STD_PAL_N |\
V4L2_STD_PAL_Nc |\
V4L2_STD_SECAM)
+
#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\
V4L2_STD_ATSC_16_VSB)
-
+/* Macros with none and all analog standards */
#define V4L2_STD_UNKNOWN 0
#define V4L2_STD_ALL (V4L2_STD_525_60 |\
V4L2_STD_625_50)
@@ -1082,6 +1121,7 @@
#define V4L2_CTRL_FLAG_INACTIVE 0x0010
#define V4L2_CTRL_FLAG_SLIDER 0x0020
#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040
+#define V4L2_CTRL_FLAG_VOLATILE 0x0080
/* Query flag, to be ORed with the control ID */
#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
@@ -2006,6 +2046,7 @@
#define V4L2_EVENT_VSYNC 1
#define V4L2_EVENT_EOS 2
#define V4L2_EVENT_CTRL 3
+#define V4L2_EVENT_FRAME_SYNC 4
#define V4L2_EVENT_PRIVATE_START 0x08000000
/* Payload for V4L2_EVENT_VSYNC */
@@ -2032,12 +2073,17 @@
__s32 default_value;
};
+struct v4l2_event_frame_sync {
+ __u32 frame_sequence;
+};
+
struct v4l2_event {
__u32 type;
union {
- struct v4l2_event_vsync vsync;
- struct v4l2_event_ctrl ctrl;
- __u8 data[64];
+ struct v4l2_event_vsync vsync;
+ struct v4l2_event_ctrl ctrl;
+ struct v4l2_event_frame_sync frame_sync;
+ __u8 data[64];
} u;
__u32 pending;
__u32 sequence;
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 851ebf1..4c069d8b 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -131,10 +131,10 @@
* virtio_driver - operations for a virtio I/O driver
* @driver: underlying device driver (populate name and owner).
* @id_table: the ids serviced by this driver.
- * @feature_table: an array of feature numbers supported by this device.
+ * @feature_table: an array of feature numbers supported by this driver.
* @feature_table_size: number of entries in the feature table array.
* @probe: the function to call when a device is found. Returns 0 or -errno.
- * @remove: the function when a device is removed.
+ * @remove: the function to call when a device is removed.
* @config_changed: optional function to call when the device configuration
* changes; may be called in interrupt context.
*/
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 39c88c5..add4790 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -155,6 +155,9 @@
#define virtio_config_val(vdev, fbit, offset, v) \
virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
+#define virtio_config_val_len(vdev, fbit, offset, v, len) \
+ virtio_config_buf((vdev), (fbit), (offset), (v), (len))
+
static inline int virtio_config_buf(struct virtio_device *vdev,
unsigned int fbit,
unsigned int offset,
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
new file mode 100644
index 0000000..27c7ede
--- /dev/null
+++ b/include/linux/virtio_mmio.h
@@ -0,0 +1,111 @@
+/*
+ * Virtio platform device driver
+ *
+ * Copyright 2011, ARM Ltd.
+ *
+ * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_MMIO_H
+#define _LINUX_VIRTIO_MMIO_H
+
+/*
+ * Control registers
+ */
+
+/* Magic value ("virt" string) - Read Only */
+#define VIRTIO_MMIO_MAGIC_VALUE 0x000
+
+/* Virtio device version - Read Only */
+#define VIRTIO_MMIO_VERSION 0x004
+
+/* Virtio device ID - Read Only */
+#define VIRTIO_MMIO_DEVICE_ID 0x008
+
+/* Virtio vendor ID - Read Only */
+#define VIRTIO_MMIO_VENDOR_ID 0x00c
+
+/* Bitmask of the features supported by the host
+ * (32 bits per set) - Read Only */
+#define VIRTIO_MMIO_HOST_FEATURES 0x010
+
+/* Host features set selector - Write Only */
+#define VIRTIO_MMIO_HOST_FEATURES_SEL 0x014
+
+/* Bitmask of features activated by the guest
+ * (32 bits per set) - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES 0x020
+
+/* Activated features set selector - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024
+
+/* Guest's memory page size in bytes - Write Only */
+#define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028
+
+/* Queue selector - Write Only */
+#define VIRTIO_MMIO_QUEUE_SEL 0x030
+
+/* Maximum size of the currently selected queue - Read Only */
+#define VIRTIO_MMIO_QUEUE_NUM_MAX 0x034
+
+/* Queue size for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_NUM 0x038
+
+/* Used Ring alignment for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_ALIGN 0x03c
+
+/* Guest's PFN for the currently selected queue - Read Write */
+#define VIRTIO_MMIO_QUEUE_PFN 0x040
+
+/* Queue notifier - Write Only */
+#define VIRTIO_MMIO_QUEUE_NOTIFY 0x050
+
+/* Interrupt status - Read Only */
+#define VIRTIO_MMIO_INTERRUPT_STATUS 0x060
+
+/* Interrupt acknowledge - Write Only */
+#define VIRTIO_MMIO_INTERRUPT_ACK 0x064
+
+/* Device status register - Read Write */
+#define VIRTIO_MMIO_STATUS 0x070
+
+/* The config space is defined by each driver as
+ * the per-driver configuration space - Read Write */
+#define VIRTIO_MMIO_CONFIG 0x100
+
+
+
+/*
+ * Interrupt flags (re: interrupt status & acknowledge registers)
+ */
+
+#define VIRTIO_MMIO_INT_VRING (1 << 0)
+#define VIRTIO_MMIO_INT_CONFIG (1 << 1)
+
+#endif
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 4a32cb6..36be0f6 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -135,13 +135,13 @@
vr->num = num;
vr->desc = p;
vr->avail = p + num*sizeof(struct vring_desc);
- vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + align-1)
- & ~(align - 1));
+ vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
+ + align-1) & ~(align - 1));
}
static inline unsigned vring_size(unsigned int num, unsigned long align)
{
- return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num)
+ return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+ align - 1) & ~(align - 1))
+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
}
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 9332e52..687fb11 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -13,6 +13,7 @@
#define VM_MAP 0x00000004 /* vmap()ed pages */
#define VM_USERMAP 0x00000008 /* suitable for remap_vmalloc_range */
#define VM_VPAGES 0x00000010 /* buffer for pages was vmalloc'ed */
+#define VM_UNLIST 0x00000020 /* vm_struct is not listed in vmlist */
/* bits [20..32] reserved for arch specific ioremap internals */
/*
diff --git a/include/media/m5mols.h b/include/media/m5mols.h
index aac2c0e..4a825ae 100644
--- a/include/media/m5mols.h
+++ b/include/media/m5mols.h
@@ -18,15 +18,13 @@
/**
* struct m5mols_platform_data - platform data for M-5MOLS driver
- * @irq: GPIO getting the irq pin of M-5MOLS
* @gpio_reset: GPIO driving the reset pin of M-5MOLS
- * @reset_polarity: active state for gpio_rst pin, 0 or 1
+ * @reset_polarity: active state for gpio_reset pin, 0 or 1
* @set_power: an additional callback to the board setup code
* to be called after enabling and before disabling
* the sensor's supply regulators
*/
struct m5mols_platform_data {
- int irq;
int gpio_reset;
u8 reset_polarity;
int (*set_power)(struct device *dev, int on);
diff --git a/include/media/mt9p031.h b/include/media/mt9p031.h
new file mode 100644
index 0000000..96448c7
--- /dev/null
+++ b/include/media/mt9p031.h
@@ -0,0 +1,19 @@
+#ifndef MT9P031_H
+#define MT9P031_H
+
+struct v4l2_subdev;
+
+enum {
+ MT9P031_COLOR_VERSION,
+ MT9P031_MONOCHROME_VERSION,
+};
+
+struct mt9p031_platform_data {
+ int (*set_xclk)(struct v4l2_subdev *subdev, int hz);
+ int (*reset)(struct v4l2_subdev *subdev, int active);
+ int ext_freq; /* input frequency to the mt9p031 for PLL dividers */
+ int target_freq; /* frequency target for the PLL */
+ int version; /* MT9P031_COLOR_VERSION or MT9P031_MONOCHROME_VERSION */
+};
+
+#endif
diff --git a/include/media/mt9t001.h b/include/media/mt9t001.h
new file mode 100644
index 0000000..e839a78
--- /dev/null
+++ b/include/media/mt9t001.h
@@ -0,0 +1,8 @@
+#ifndef _MEDIA_MT9T001_H
+#define _MEDIA_MT9T001_H
+
+struct mt9t001_platform_data {
+ unsigned int clk_pol:1;
+};
+
+#endif
diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h
new file mode 100644
index 0000000..e917b1d
--- /dev/null
+++ b/include/media/omap3isp.h
@@ -0,0 +1,140 @@
+/*
+ * omap3isp.h
+ *
+ * TI OMAP3 ISP - Platform data
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __MEDIA_OMAP3ISP_H__
+#define __MEDIA_OMAP3ISP_H__
+
+struct i2c_board_info;
+struct isp_device;
+
+enum isp_interface_type {
+ ISP_INTERFACE_PARALLEL,
+ ISP_INTERFACE_CSI2A_PHY2,
+ ISP_INTERFACE_CCP2B_PHY1,
+ ISP_INTERFACE_CCP2B_PHY2,
+ ISP_INTERFACE_CSI2C_PHY1,
+};
+
+enum {
+ ISP_BRIDGE_DISABLE = 0,
+ ISP_BRIDGE_LITTLE_ENDIAN = 2,
+ ISP_BRIDGE_BIG_ENDIAN = 3,
+};
+
+enum {
+ ISP_LANE_SHIFT_0 = 0,
+ ISP_LANE_SHIFT_2 = 1,
+ ISP_LANE_SHIFT_4 = 2,
+ ISP_LANE_SHIFT_6 = 3,
+};
+
+/**
+ * struct isp_parallel_platform_data - Parallel interface platform data
+ * @data_lane_shift: Data lane shifter
+ * ISP_LANE_SHIFT_0 - CAMEXT[13:0] -> CAM[13:0]
+ * ISP_LANE_SHIFT_2 - CAMEXT[13:2] -> CAM[11:0]
+ * ISP_LANE_SHIFT_4 - CAMEXT[13:4] -> CAM[9:0]
+ * ISP_LANE_SHIFT_6 - CAMEXT[13:6] -> CAM[7:0]
+ * @clk_pol: Pixel clock polarity
+ * 0 - Non Inverted, 1 - Inverted
+ * @hs_pol: Horizontal synchronization polarity
+ * 0 - Active high, 1 - Active low
+ * @vs_pol: Vertical synchronization polarity
+ * 0 - Active high, 1 - Active low
+ * @bridge: CCDC Bridge input control
+ * ISP_BRIDGE_DISABLE - Disable
+ * ISP_BRIDGE_LITTLE_ENDIAN - Little endian
+ * ISP_BRIDGE_BIG_ENDIAN - Big endian
+ */
+struct isp_parallel_platform_data {
+ unsigned int data_lane_shift:2;
+ unsigned int clk_pol:1;
+ unsigned int hs_pol:1;
+ unsigned int vs_pol:1;
+ unsigned int bridge:2;
+};
+
+enum {
+ ISP_CCP2_PHY_DATA_CLOCK = 0,
+ ISP_CCP2_PHY_DATA_STROBE = 1,
+};
+
+enum {
+ ISP_CCP2_MODE_MIPI = 0,
+ ISP_CCP2_MODE_CCP2 = 1,
+};
+
+/**
+ * struct isp_ccp2_platform_data - CCP2 interface platform data
+ * @strobe_clk_pol: Strobe/clock polarity
+ * 0 - Non Inverted, 1 - Inverted
+ * @crc: Enable the cyclic redundancy check
+ * @ccp2_mode: Enable CCP2 compatibility mode
+ * ISP_CCP2_MODE_MIPI - MIPI-CSI1 mode
+ * ISP_CCP2_MODE_CCP2 - CCP2 mode
+ * @phy_layer: Physical layer selection
+ * ISP_CCP2_PHY_DATA_CLOCK - Data/clock physical layer
+ * ISP_CCP2_PHY_DATA_STROBE - Data/strobe physical layer
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_ccp2_platform_data {
+ unsigned int strobe_clk_pol:1;
+ unsigned int crc:1;
+ unsigned int ccp2_mode:1;
+ unsigned int phy_layer:1;
+ unsigned int vpclk_div:2;
+};
+
+/**
+ * struct isp_csi2_platform_data - CSI2 interface platform data
+ * @crc: Enable the cyclic redundancy check
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_csi2_platform_data {
+ unsigned crc:1;
+ unsigned vpclk_div:2;
+};
+
+struct isp_subdev_i2c_board_info {
+ struct i2c_board_info *board_info;
+ int i2c_adapter_id;
+};
+
+struct isp_v4l2_subdevs_group {
+ struct isp_subdev_i2c_board_info *subdevs;
+ enum isp_interface_type interface;
+ union {
+ struct isp_parallel_platform_data parallel;
+ struct isp_ccp2_platform_data ccp2;
+ struct isp_csi2_platform_data csi2;
+ } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
+};
+
+struct isp_platform_data {
+ struct isp_v4l2_subdevs_group *subdevs;
+ void (*set_constraints)(struct isp_device *isp, bool enable);
+};
+
+#endif /* __MEDIA_OMAP3ISP_H__ */
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index b1f19b7..b0c494a 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -23,8 +23,11 @@
#include <media/rc-map.h>
extern int rc_core_debug;
-#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \
- printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
+#define IR_dprintk(level, fmt, ...) \
+do { \
+ if (rc_core_debug >= level) \
+ pr_debug("%s: " fmt, __func__, ##__VA_ARGS__); \
+} while (0)
enum rc_driver_type {
RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 17c9759..26a3bd0 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -61,6 +61,7 @@
#define RC_MAP_APAC_VIEWCOMP "rc-apac-viewcomp"
#define RC_MAP_ASUS_PC39 "rc-asus-pc39"
#define RC_MAP_ATI_TV_WONDER_HD_600 "rc-ati-tv-wonder-hd-600"
+#define RC_MAP_ATI_X10 "rc-ati-x10"
#define RC_MAP_AVERMEDIA_A16D "rc-avermedia-a16d"
#define RC_MAP_AVERMEDIA_CARDBUS "rc-avermedia-cardbus"
#define RC_MAP_AVERMEDIA_DVBT "rc-avermedia-dvbt"
@@ -106,6 +107,7 @@
#define RC_MAP_LIRC "rc-lirc"
#define RC_MAP_LME2510 "rc-lme2510"
#define RC_MAP_MANLI "rc-manli"
+#define RC_MAP_MEDION_X10 "rc-medion-x10"
#define RC_MAP_MSI_DIGIVOX_II "rc-msi-digivox-ii"
#define RC_MAP_MSI_DIGIVOX_III "rc-msi-digivox-iii"
#define RC_MAP_MSI_TVANYWHERE_PLUS "rc-msi-tvanywhere-plus"
@@ -130,6 +132,7 @@
#define RC_MAP_RC5_TV "rc-rc5-tv"
#define RC_MAP_RC6_MCE "rc-rc6-mce"
#define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys"
+#define RC_MAP_SNAPSTREAM_FIREFLY "rc-snapstream-firefly"
#define RC_MAP_STREAMZAP "rc-streamzap"
#define RC_MAP_TBS_NEC "rc-tbs-nec"
#define RC_MAP_TECHNISAT_USB2 "rc-technisat-usb2"
diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h
index 9fdff8a4..688fb3f 100644
--- a/include/media/s5p_fimc.h
+++ b/include/media/s5p_fimc.h
@@ -19,11 +19,6 @@
FIMC_LCD_WB, /* FIFO link from LCD mixer */
};
-#define FIMC_CLK_INV_PCLK (1 << 0)
-#define FIMC_CLK_INV_VSYNC (1 << 1)
-#define FIMC_CLK_INV_HREF (1 << 2)
-#define FIMC_CLK_INV_HSYNC (1 << 3)
-
struct i2c_board_info;
/**
@@ -36,7 +31,8 @@
* @csi_data_align: MIPI-CSI interface data alignment in bits
* @i2c_bus_num: i2c control bus id the sensor is attached to
* @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
- * @flags: flags defining bus signals polarity inversion (High by default)
+ * @clk_id: index of the SoC peripheral clock for sensors
+ * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
*/
struct s5p_fimc_isp_info {
struct i2c_board_info *board_info;
@@ -46,6 +42,7 @@
u16 i2c_bus_num;
u16 mux_id;
u16 flags;
+ u8 clk_id;
};
/**
@@ -58,4 +55,13 @@
struct s5p_fimc_isp_info *isp_info;
int num_clients;
};
+
+/*
+ * v4l2_device notification id. This is only for internal use in the kernel.
+ * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
+ * frame capture mode when there is only one VSYNC pulse issued by the sensor
+ * at begining of the frame transmission.
+ */
+#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
+
#endif /* S5P_FIMC_H_ */
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 7982714..5017500 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -25,24 +25,32 @@
extern unsigned int saa7146_debug;
-//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),KBUILD_MODNAME,__func__)
-
#ifndef DEBUG_VARIABLE
#define DEBUG_VARIABLE saa7146_debug
#endif
-#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME, __func__)
-#define INFO(x) { printk("%s: ",KBUILD_MODNAME); printk x; }
+#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
-#define ERR(x) { DEBUG_PROLOG; printk x; }
+#define _DBG(mask, fmt, ...) \
+do { \
+ if (DEBUG_VARIABLE & mask) \
+ pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \
+} while (0)
-#define DEB_S(x) if (0!=(DEBUG_VARIABLE&0x01)) { DEBUG_PROLOG; printk x; } /* simple debug messages */
-#define DEB_D(x) if (0!=(DEBUG_VARIABLE&0x02)) { DEBUG_PROLOG; printk x; } /* more detailed debug messages */
-#define DEB_EE(x) if (0!=(DEBUG_VARIABLE&0x04)) { DEBUG_PROLOG; printk x; } /* print enter and exit of functions */
-#define DEB_I2C(x) if (0!=(DEBUG_VARIABLE&0x08)) { DEBUG_PROLOG; printk x; } /* i2c debug messages */
-#define DEB_VBI(x) if (0!=(DEBUG_VARIABLE&0x10)) { DEBUG_PROLOG; printk x; } /* vbi debug messages */
-#define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */
-#define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */
+/* simple debug messages */
+#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__)
+/* more detailed debug messages */
+#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__)
+/* print enter and exit of functions */
+#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__)
+/* i2c debug messages */
+#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__)
+/* vbi debug messages */
+#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__)
+/* interrupt debug messages */
+#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__)
+/* capture debug messages */
+#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__)
#define SAA7146_ISR_CLEAR(x,y) \
saa7146_write(x, ISR, (y));
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 63fd9d3..810a209 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -212,9 +212,6 @@
/* module sn9c20x: just ident 10000 */
V4L2_IDENT_SN9C20X = 10000,
- /* Siliconfile sensors: reserved range 10100 - 10199 */
- V4L2_IDENT_NOON010PC30 = 10100,
-
/* module cx231xx and cx25840 */
V4L2_IDENT_CX2310X_AV = 23099, /* Integrated A/V decoder; not in '100 */
V4L2_IDENT_CX23100 = 23100,
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 13fe4d7..eeb3df6 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -65,14 +65,12 @@
* @is_private: If set, then this control is private to its handler and it
* will not be added to any other handlers. Drivers can set
* this flag.
- * @is_volatile: If set, then this control is volatile. This means that the
- * control's current value cannot be cached and needs to be
- * retrieved through the g_volatile_ctrl op. Drivers can set
- * this flag.
* @is_auto: If set, then this control selects whether the other cluster
* members are in 'automatic' mode or 'manual' mode. This is
* used for autogain/gain type clusters. Drivers should never
* set this flag directly.
+ * @has_volatiles: If set, then one or more members of the cluster are volatile.
+ * Drivers should never touch this flag.
* @manual_mode_value: If the is_auto flag is set, then this is the value
* of the auto control that determines if that control is in
* manual mode. So if the value of the auto control equals this
@@ -118,8 +116,8 @@
unsigned int is_new:1;
unsigned int is_private:1;
- unsigned int is_volatile:1;
unsigned int is_auto:1;
+ unsigned int has_volatiles:1;
unsigned int manual_mode_value:8;
const struct v4l2_ctrl_ops *ops;
@@ -208,9 +206,6 @@
* must be NULL.
* @is_private: If set, then this control is private to its handler and it
* will not be added to any other handlers.
- * @is_volatile: If set, then this control is volatile. This means that the
- * control's current value cannot be cached and needs to be
- * retrieved through the g_volatile_ctrl op.
*/
struct v4l2_ctrl_config {
const struct v4l2_ctrl_ops *ops;
@@ -225,7 +220,6 @@
u32 menu_skip_mask;
const char * const *qmenu;
unsigned int is_private:1;
- unsigned int is_volatile:1;
};
/** v4l2_ctrl_fill() - Fill in the control fields based on the control ID.
@@ -389,8 +383,7 @@
* @manual_val: The value for the first control in the cluster that equals the
* manual setting.
* @set_volatile: If true, then all controls except the first auto control will
- * have is_volatile set to true. If false, then is_volatile will not
- * be touched.
+ * be volatile.
*
* Use for control groups where one control selects some automatic feature and
* the other controls are only active whenever the automatic feature is turned
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 6114007..83ae07e 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -22,8 +22,12 @@
*/
#define V4L2_MBUS_MASTER (1 << 0)
#define V4L2_MBUS_SLAVE (1 << 1)
-/* Which signal polarities it supports */
-/* Note: in BT.656 mode HSYNC and VSYNC are unused */
+/*
+ * Signal polarity flags
+ * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
+ * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
+ * configuration of hardware that uses [HV]REF signals
+ */
#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2)
#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3)
#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4)
@@ -32,6 +36,10 @@
#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7)
#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8)
#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9)
+/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10)
+/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11)
/* Serial flags */
/* How many lanes the client can use */
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index f87472a..ea55c08 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -75,7 +75,6 @@
struct vb2_plane {
void *mem_priv;
- int mapped:1;
};
/**
@@ -147,7 +146,6 @@
* @done_entry: entry on the list that stores all buffers ready to
* be dequeued to userspace
* @planes: private per-plane information; do not change
- * @num_planes_mapped: number of mapped planes; do not change
*/
struct vb2_buffer {
struct v4l2_buffer v4l2_buf;
@@ -164,7 +162,6 @@
struct list_head done_entry;
struct vb2_plane planes[VIDEO_MAX_PLANES];
- unsigned int num_planes_mapped;
};
/**
@@ -199,19 +196,28 @@
* before userspace accesses the buffer; optional
* @buf_cleanup: called once before the buffer is freed; drivers may
* perform any additional cleanup; optional
- * @start_streaming: called once before entering 'streaming' state; enables
- * driver to receive buffers over buf_queue() callback
+ * @start_streaming: called once to enter 'streaming' state; the driver may
+ * receive buffers with @buf_queue callback before
+ * @start_streaming is called; the driver gets the number
+ * of already queued buffers in count parameter; driver
+ * can return an error if hardware fails or not enough
+ * buffers has been queued, in such case all buffers that
+ * have been already given by the @buf_queue callback are
+ * invalidated.
* @stop_streaming: called when 'streaming' state must be disabled; driver
* should stop any DMA transactions or wait until they
* finish and give back all buffers it got from buf_queue()
* callback; may use vb2_wait_for_all_buffers() function
* @buf_queue: passes buffer vb to the driver; driver may start
* hardware operation on this buffer; driver should give
- * the buffer back by calling vb2_buffer_done() function
+ * the buffer back by calling vb2_buffer_done() function;
+ * it is allways called after calling STREAMON ioctl;
+ * might be called before start_streaming callback if user
+ * pre-queued buffers before calling STREAMON
*/
struct vb2_ops {
int (*queue_setup)(struct vb2_queue *q, unsigned int *num_buffers,
- unsigned int *num_planes, unsigned long sizes[],
+ unsigned int *num_planes, unsigned int sizes[],
void *alloc_ctxs[]);
void (*wait_prepare)(struct vb2_queue *q);
@@ -222,7 +228,7 @@
int (*buf_finish)(struct vb2_buffer *vb);
void (*buf_cleanup)(struct vb2_buffer *vb);
- int (*start_streaming)(struct vb2_queue *q);
+ int (*start_streaming)(struct vb2_queue *q, unsigned int count);
int (*stop_streaming)(struct vb2_queue *q);
void (*buf_queue)(struct vb2_buffer *vb);
@@ -276,6 +282,7 @@
wait_queue_head_t done_wq;
void *alloc_ctx[VIDEO_MAX_PLANES];
+ unsigned int plane_sizes[VIDEO_MAX_PLANES];
unsigned int streaming:1;
diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h
index 7e6c68b..19ae1e3 100644
--- a/include/media/videobuf2-dma-contig.h
+++ b/include/media/videobuf2-dma-contig.h
@@ -17,11 +17,11 @@
#include <linux/dma-mapping.h>
static inline dma_addr_t
-vb2_dma_contig_plane_paddr(struct vb2_buffer *vb, unsigned int plane_no)
+vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
{
- dma_addr_t *paddr = vb2_plane_cookie(vb, plane_no);
+ dma_addr_t *addr = vb2_plane_cookie(vb, plane_no);
- return *paddr;
+ return *addr;
}
void *vb2_dma_contig_init_ctx(struct device *dev);
diff --git a/drivers/staging/altera-stapl/altera.h b/include/misc/altera.h
similarity index 100%
rename from drivers/staging/altera-stapl/altera.h
rename to include/misc/altera.h
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index e727555..e86af08 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -77,7 +77,7 @@
#define BT_POWER_FORCE_ACTIVE_OFF 0
#define BT_POWER_FORCE_ACTIVE_ON 1
-__attribute__((format (printf, 2, 3)))
+__printf(2, 3)
int bt_printk(const char *level, const char *fmt, ...);
#define BT_INFO(fmt, arg...) bt_printk(KERN_INFO, pr_fmt(fmt), ##arg)
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index 180231c5..f91a1fb 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -134,6 +134,7 @@
struct inet_bind_bucket *tw_tb;
struct hlist_node tw_death_node;
};
+#define tw_tclass tw_tos
static inline void inet_twsk_add_node_rcu(struct inet_timewait_sock *tw,
struct hlist_nulls_head *list)
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 3b5ac1f..a366a8a 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -486,7 +486,8 @@
extern int ip6_xmit(struct sock *sk,
struct sk_buff *skb,
struct flowi6 *fl6,
- struct ipv6_txoptions *opt);
+ struct ipv6_txoptions *opt,
+ int tclass);
extern int ip6_nd_hdr(struct sock *sk,
struct sk_buff *skb,
diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h
index 920997f..e991bd0 100644
--- a/include/net/netfilter/nf_log.h
+++ b/include/net/netfilter/nf_log.h
@@ -53,12 +53,13 @@
void nf_log_unbind_pf(u_int8_t pf);
/* Calls the registered backend logging function */
+__printf(7, 8)
void nf_log_packet(u_int8_t pf,
unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const struct nf_loginfo *li,
- const char *fmt, ...) __attribute__ ((format(printf,7,8)));
+ const char *fmt, ...);
#endif /* _NF_LOG_H */
diff --git a/include/net/sock.h b/include/net/sock.h
index 5ac682f..c6658be 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -76,8 +76,8 @@
printk(KERN_DEBUG msg); } while (0)
#else
/* Validate arguments and do nothing */
-static inline void __attribute__ ((format (printf, 2, 3)))
-SOCK_DEBUG(struct sock *sk, const char *msg, ...)
+static inline __printf(2, 3)
+void SOCK_DEBUG(struct sock *sk, const char *msg, ...)
{
}
#endif
diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h
index fe5b051..81aba3a 100644
--- a/include/rdma/ib_user_verbs.h
+++ b/include/rdma/ib_user_verbs.h
@@ -81,7 +81,11 @@
IB_USER_VERBS_CMD_MODIFY_SRQ,
IB_USER_VERBS_CMD_QUERY_SRQ,
IB_USER_VERBS_CMD_DESTROY_SRQ,
- IB_USER_VERBS_CMD_POST_SRQ_RECV
+ IB_USER_VERBS_CMD_POST_SRQ_RECV,
+ IB_USER_VERBS_CMD_OPEN_XRCD,
+ IB_USER_VERBS_CMD_CLOSE_XRCD,
+ IB_USER_VERBS_CMD_CREATE_XSRQ,
+ IB_USER_VERBS_CMD_OPEN_QP
};
/*
@@ -222,6 +226,21 @@
__u32 pd_handle;
};
+struct ib_uverbs_open_xrcd {
+ __u64 response;
+ __u32 fd;
+ __u32 oflags;
+ __u64 driver_data[0];
+};
+
+struct ib_uverbs_open_xrcd_resp {
+ __u32 xrcd_handle;
+};
+
+struct ib_uverbs_close_xrcd {
+ __u32 xrcd_handle;
+};
+
struct ib_uverbs_reg_mr {
__u64 response;
__u64 start;
@@ -404,6 +423,17 @@
__u64 driver_data[0];
};
+struct ib_uverbs_open_qp {
+ __u64 response;
+ __u64 user_handle;
+ __u32 pd_handle;
+ __u32 qpn;
+ __u8 qp_type;
+ __u8 reserved[7];
+ __u64 driver_data[0];
+};
+
+/* also used for open response */
struct ib_uverbs_create_qp_resp {
__u32 qp_handle;
__u32 qpn;
@@ -648,11 +678,25 @@
__u64 driver_data[0];
};
+struct ib_uverbs_create_xsrq {
+ __u64 response;
+ __u64 user_handle;
+ __u32 srq_type;
+ __u32 pd_handle;
+ __u32 max_wr;
+ __u32 max_sge;
+ __u32 srq_limit;
+ __u32 reserved;
+ __u32 xrcd_handle;
+ __u32 cq_handle;
+ __u64 driver_data[0];
+};
+
struct ib_uverbs_create_srq_resp {
__u32 srq_handle;
__u32 max_wr;
__u32 max_sge;
- __u32 reserved;
+ __u32 srqn;
};
struct ib_uverbs_modify_srq {
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 228be3e..bf5daaf 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -112,6 +112,7 @@
*/
IB_DEVICE_UD_IP_CSUM = (1<<18),
IB_DEVICE_UD_TSO = (1<<19),
+ IB_DEVICE_XRC = (1<<20),
IB_DEVICE_MEM_MGT_EXTENSIONS = (1<<21),
IB_DEVICE_BLOCK_MULTICAST_LOOPBACK = (1<<22),
};
@@ -207,6 +208,7 @@
IB_PORT_SM_DISABLED = 1 << 10,
IB_PORT_SYS_IMAGE_GUID_SUP = 1 << 11,
IB_PORT_PKEY_SW_EXT_PORT_TRAP_SUP = 1 << 12,
+ IB_PORT_EXTENDED_SPEEDS_SUP = 1 << 14,
IB_PORT_CM_SUP = 1 << 16,
IB_PORT_SNMP_TUNNEL_SUP = 1 << 17,
IB_PORT_REINIT_SUP = 1 << 18,
@@ -415,7 +417,15 @@
IB_RATE_40_GBPS = 7,
IB_RATE_60_GBPS = 8,
IB_RATE_80_GBPS = 9,
- IB_RATE_120_GBPS = 10
+ IB_RATE_120_GBPS = 10,
+ IB_RATE_14_GBPS = 11,
+ IB_RATE_56_GBPS = 12,
+ IB_RATE_112_GBPS = 13,
+ IB_RATE_168_GBPS = 14,
+ IB_RATE_25_GBPS = 15,
+ IB_RATE_100_GBPS = 16,
+ IB_RATE_200_GBPS = 17,
+ IB_RATE_300_GBPS = 18
};
/**
@@ -427,6 +437,13 @@
int ib_rate_to_mult(enum ib_rate rate) __attribute_const__;
/**
+ * ib_rate_to_mbps - Convert the IB rate enum to Mbps.
+ * For example, IB_RATE_2_5_GBPS will be converted to 2500.
+ * @rate: rate to convert.
+ */
+int ib_rate_to_mbps(enum ib_rate rate) __attribute_const__;
+
+/**
* mult_to_ib_rate - Convert a multiple of 2.5 Gbit/sec to an IB rate
* enum.
* @mult: multiple to convert.
@@ -522,6 +539,11 @@
IB_CQ_REPORT_MISSED_EVENTS = 1 << 2,
};
+enum ib_srq_type {
+ IB_SRQT_BASIC,
+ IB_SRQT_XRC
+};
+
enum ib_srq_attr_mask {
IB_SRQ_MAX_WR = 1 << 0,
IB_SRQ_LIMIT = 1 << 1,
@@ -537,6 +559,14 @@
void (*event_handler)(struct ib_event *, void *);
void *srq_context;
struct ib_srq_attr attr;
+ enum ib_srq_type srq_type;
+
+ union {
+ struct {
+ struct ib_xrcd *xrcd;
+ struct ib_cq *cq;
+ } xrc;
+ } ext;
};
struct ib_qp_cap {
@@ -565,7 +595,11 @@
IB_QPT_UC,
IB_QPT_UD,
IB_QPT_RAW_IPV6,
- IB_QPT_RAW_ETHERTYPE
+ IB_QPT_RAW_ETHERTYPE,
+ /* Save 8 for RAW_PACKET */
+ IB_QPT_XRC_INI = 9,
+ IB_QPT_XRC_TGT,
+ IB_QPT_MAX
};
enum ib_qp_create_flags {
@@ -579,6 +613,7 @@
struct ib_cq *send_cq;
struct ib_cq *recv_cq;
struct ib_srq *srq;
+ struct ib_xrcd *xrcd; /* XRC TGT QPs only */
struct ib_qp_cap cap;
enum ib_sig_type sq_sig_type;
enum ib_qp_type qp_type;
@@ -586,6 +621,13 @@
u8 port_num; /* special QP types only */
};
+struct ib_qp_open_attr {
+ void (*event_handler)(struct ib_event *, void *);
+ void *qp_context;
+ u32 qp_num;
+ enum ib_qp_type qp_type;
+};
+
enum ib_rnr_timeout {
IB_RNR_TIMER_655_36 = 0,
IB_RNR_TIMER_000_01 = 1,
@@ -770,6 +812,7 @@
u32 rkey;
} fast_reg;
} wr;
+ u32 xrc_remote_srq_num; /* XRC TGT QPs only */
};
struct ib_recv_wr {
@@ -831,6 +874,7 @@
struct list_head qp_list;
struct list_head srq_list;
struct list_head ah_list;
+ struct list_head xrcd_list;
int closing;
};
@@ -858,6 +902,15 @@
atomic_t usecnt; /* count all resources */
};
+struct ib_xrcd {
+ struct ib_device *device;
+ atomic_t usecnt; /* count all exposed resources */
+ struct inode *inode;
+
+ struct mutex tgt_qp_mutex;
+ struct list_head tgt_qp_list;
+};
+
struct ib_ah {
struct ib_device *device;
struct ib_pd *pd;
@@ -882,7 +935,16 @@
struct ib_uobject *uobject;
void (*event_handler)(struct ib_event *, void *);
void *srq_context;
+ enum ib_srq_type srq_type;
atomic_t usecnt;
+
+ union {
+ struct {
+ struct ib_xrcd *xrcd;
+ struct ib_cq *cq;
+ u32 srq_num;
+ } xrc;
+ } ext;
};
struct ib_qp {
@@ -891,6 +953,11 @@
struct ib_cq *send_cq;
struct ib_cq *recv_cq;
struct ib_srq *srq;
+ struct ib_xrcd *xrcd; /* XRC TGT QPs only */
+ struct list_head xrcd_list;
+ atomic_t usecnt; /* count times opened */
+ struct list_head open_list;
+ struct ib_qp *real_qp;
struct ib_uobject *uobject;
void (*event_handler)(struct ib_event *, void *);
void *qp_context;
@@ -1149,6 +1216,10 @@
struct ib_grh *in_grh,
struct ib_mad *in_mad,
struct ib_mad *out_mad);
+ struct ib_xrcd * (*alloc_xrcd)(struct ib_device *device,
+ struct ib_ucontext *ucontext,
+ struct ib_udata *udata);
+ int (*dealloc_xrcd)(struct ib_xrcd *xrcd);
struct ib_dma_mapping_ops *dma_ops;
@@ -1443,6 +1514,25 @@
int ib_destroy_qp(struct ib_qp *qp);
/**
+ * ib_open_qp - Obtain a reference to an existing sharable QP.
+ * @xrcd - XRC domain
+ * @qp_open_attr: Attributes identifying the QP to open.
+ *
+ * Returns a reference to a sharable QP.
+ */
+struct ib_qp *ib_open_qp(struct ib_xrcd *xrcd,
+ struct ib_qp_open_attr *qp_open_attr);
+
+/**
+ * ib_close_qp - Release an external reference to a QP.
+ * @qp: The QP handle to release
+ *
+ * The opened QP handle is released by the caller. The underlying
+ * shared QP is not destroyed until all internal references are released.
+ */
+int ib_close_qp(struct ib_qp *qp);
+
+/**
* ib_post_send - Posts a list of work requests to the send queue of
* the specified QP.
* @qp: The QP to post the work request on.
@@ -2060,4 +2150,16 @@
*/
int ib_detach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid);
+/**
+ * ib_alloc_xrcd - Allocates an XRC domain.
+ * @device: The device on which to allocate the XRC domain.
+ */
+struct ib_xrcd *ib_alloc_xrcd(struct ib_device *device);
+
+/**
+ * ib_dealloc_xrcd - Deallocates an XRC domain.
+ * @xrcd: The XRC domain to deallocate.
+ */
+int ib_dealloc_xrcd(struct ib_xrcd *xrcd);
+
#endif /* IB_VERBS_H */
diff --git a/include/rdma/iw_cm.h b/include/rdma/iw_cm.h
index 2d0191c..1a046b1 100644
--- a/include/rdma/iw_cm.h
+++ b/include/rdma/iw_cm.h
@@ -52,8 +52,10 @@
struct sockaddr_in local_addr;
struct sockaddr_in remote_addr;
void *private_data;
- u8 private_data_len;
void *provider_data;
+ u8 private_data_len;
+ u8 ord;
+ u8 ird;
};
/**
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 26977c1..51988f8 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -65,6 +65,7 @@
enum rdma_port_space {
RDMA_PS_SDP = 0x0001,
RDMA_PS_IPOIB = 0x0002,
+ RDMA_PS_IB = 0x013F,
RDMA_PS_TCP = 0x0106,
RDMA_PS_UDP = 0x0111,
};
diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h
index fc82c18..5348a00 100644
--- a/include/rdma/rdma_user_cm.h
+++ b/include/rdma/rdma_user_cm.h
@@ -77,7 +77,8 @@
__u64 uid;
__u64 response;
__u16 ps;
- __u8 reserved[6];
+ __u8 qp_type;
+ __u8 reserved[5];
};
struct rdma_ucm_create_id_resp {
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index ddb0456..2703e3b 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -59,6 +59,7 @@
ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST = UEVENT_BASE + 19,
ISCSI_UEVENT_PATH_UPDATE = UEVENT_BASE + 20,
+ ISCSI_UEVENT_SET_IFACE_PARAMS = UEVENT_BASE + 21,
/* up events */
ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1,
@@ -70,6 +71,7 @@
ISCSI_KEVENT_PATH_REQ = KEVENT_BASE + 7,
ISCSI_KEVENT_IF_DOWN = KEVENT_BASE + 8,
+ ISCSI_KEVENT_CONN_LOGIN_STATE = KEVENT_BASE + 9,
};
enum iscsi_tgt_dscvr {
@@ -172,6 +174,10 @@
struct msg_set_path {
uint32_t host_no;
} set_path;
+ struct msg_set_iface_params {
+ uint32_t host_no;
+ uint32_t count;
+ } set_iface_params;
} u;
union {
/* messages k -> u */
@@ -193,6 +199,11 @@
uint32_t cid;
uint64_t recv_handle;
} recv_req;
+ struct msg_conn_login {
+ uint32_t sid;
+ uint32_t cid;
+ uint32_t state; /* enum iscsi_conn_state */
+ } conn_login;
struct msg_conn_error {
uint32_t sid;
uint32_t cid;
@@ -214,6 +225,21 @@
} r;
} __attribute__ ((aligned (sizeof(uint64_t))));
+enum iscsi_param_type {
+ ISCSI_PARAM, /* iscsi_param (session, conn, target, LU) */
+ ISCSI_HOST_PARAM, /* iscsi_host_param */
+ ISCSI_NET_PARAM, /* iscsi_net_param */
+};
+
+struct iscsi_iface_param_info {
+ uint32_t iface_num; /* iface number, 0 - n */
+ uint32_t len; /* Actual length of the param */
+ uint16_t param; /* iscsi param value */
+ uint8_t iface_type; /* IPv4 or IPv6 */
+ uint8_t param_type; /* iscsi_param_type */
+ uint8_t value[0]; /* length sized value follows */
+} __packed;
+
/*
* To keep the struct iscsi_uevent size the same for userspace code
* compatibility, the main structure for ISCSI_UEVENT_PATH_UPDATE and
@@ -237,6 +263,71 @@
uint16_t pmtu;
} __attribute__ ((aligned (sizeof(uint64_t))));
+/* iscsi iface enabled/disabled setting */
+#define ISCSI_IFACE_DISABLE 0x01
+#define ISCSI_IFACE_ENABLE 0x02
+
+/* ipv4 bootproto */
+#define ISCSI_BOOTPROTO_STATIC 0x01
+#define ISCSI_BOOTPROTO_DHCP 0x02
+
+/* ipv6 addr autoconfig type */
+#define ISCSI_IPV6_AUTOCFG_DISABLE 0x01
+#define ISCSI_IPV6_AUTOCFG_ND_ENABLE 0x02
+#define ISCSI_IPV6_AUTOCFG_DHCPV6_ENABLE 0x03
+
+/* ipv6 link local addr type */
+#define ISCSI_IPV6_LINKLOCAL_AUTOCFG_ENABLE 0x01
+#define ISCSI_IPV6_LINKLOCAL_AUTOCFG_DISABLE 0x02
+
+/* ipv6 router addr type */
+#define ISCSI_IPV6_ROUTER_AUTOCFG_ENABLE 0x01
+#define ISCSI_IPV6_ROUTER_AUTOCFG_DISABLE 0x02
+
+#define ISCSI_IFACE_TYPE_IPV4 0x01
+#define ISCSI_IFACE_TYPE_IPV6 0x02
+
+#define ISCSI_MAX_VLAN_ID 4095
+#define ISCSI_MAX_VLAN_PRIORITY 7
+
+/* iscsi vlan enable/disabled setting */
+#define ISCSI_VLAN_DISABLE 0x01
+#define ISCSI_VLAN_ENABLE 0x02
+
+/* iSCSI network params */
+enum iscsi_net_param {
+ ISCSI_NET_PARAM_IPV4_ADDR = 1,
+ ISCSI_NET_PARAM_IPV4_SUBNET = 2,
+ ISCSI_NET_PARAM_IPV4_GW = 3,
+ ISCSI_NET_PARAM_IPV4_BOOTPROTO = 4,
+ ISCSI_NET_PARAM_MAC = 5,
+ ISCSI_NET_PARAM_IPV6_LINKLOCAL = 6,
+ ISCSI_NET_PARAM_IPV6_ADDR = 7,
+ ISCSI_NET_PARAM_IPV6_ROUTER = 8,
+ ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG = 9,
+ ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG = 10,
+ ISCSI_NET_PARAM_IPV6_ROUTER_AUTOCFG = 11,
+ ISCSI_NET_PARAM_IFACE_ENABLE = 12,
+ ISCSI_NET_PARAM_VLAN_ID = 13,
+ ISCSI_NET_PARAM_VLAN_PRIORITY = 14,
+ ISCSI_NET_PARAM_VLAN_ENABLED = 15,
+ ISCSI_NET_PARAM_VLAN_TAG = 16,
+ ISCSI_NET_PARAM_IFACE_TYPE = 17,
+ ISCSI_NET_PARAM_IFACE_NAME = 18,
+ ISCSI_NET_PARAM_MTU = 19,
+ ISCSI_NET_PARAM_PORT = 20,
+};
+
+enum iscsi_conn_state {
+ ISCSI_CONN_STATE_FREE,
+ ISCSI_CONN_STATE_XPT_WAIT,
+ ISCSI_CONN_STATE_IN_LOGIN,
+ ISCSI_CONN_STATE_LOGGED_IN,
+ ISCSI_CONN_STATE_IN_LOGOUT,
+ ISCSI_CONN_STATE_LOGOUT_REQUESTED,
+ ISCSI_CONN_STATE_CLEANUP_WAIT,
+};
+
/*
* Common error codes
*/
@@ -319,44 +410,6 @@
ISCSI_PARAM_MAX,
};
-#define ISCSI_MAX_RECV_DLENGTH (1ULL << ISCSI_PARAM_MAX_RECV_DLENGTH)
-#define ISCSI_MAX_XMIT_DLENGTH (1ULL << ISCSI_PARAM_MAX_XMIT_DLENGTH)
-#define ISCSI_HDRDGST_EN (1ULL << ISCSI_PARAM_HDRDGST_EN)
-#define ISCSI_DATADGST_EN (1ULL << ISCSI_PARAM_DATADGST_EN)
-#define ISCSI_INITIAL_R2T_EN (1ULL << ISCSI_PARAM_INITIAL_R2T_EN)
-#define ISCSI_MAX_R2T (1ULL << ISCSI_PARAM_MAX_R2T)
-#define ISCSI_IMM_DATA_EN (1ULL << ISCSI_PARAM_IMM_DATA_EN)
-#define ISCSI_FIRST_BURST (1ULL << ISCSI_PARAM_FIRST_BURST)
-#define ISCSI_MAX_BURST (1ULL << ISCSI_PARAM_MAX_BURST)
-#define ISCSI_PDU_INORDER_EN (1ULL << ISCSI_PARAM_PDU_INORDER_EN)
-#define ISCSI_DATASEQ_INORDER_EN (1ULL << ISCSI_PARAM_DATASEQ_INORDER_EN)
-#define ISCSI_ERL (1ULL << ISCSI_PARAM_ERL)
-#define ISCSI_IFMARKER_EN (1ULL << ISCSI_PARAM_IFMARKER_EN)
-#define ISCSI_OFMARKER_EN (1ULL << ISCSI_PARAM_OFMARKER_EN)
-#define ISCSI_EXP_STATSN (1ULL << ISCSI_PARAM_EXP_STATSN)
-#define ISCSI_TARGET_NAME (1ULL << ISCSI_PARAM_TARGET_NAME)
-#define ISCSI_TPGT (1ULL << ISCSI_PARAM_TPGT)
-#define ISCSI_PERSISTENT_ADDRESS (1ULL << ISCSI_PARAM_PERSISTENT_ADDRESS)
-#define ISCSI_PERSISTENT_PORT (1ULL << ISCSI_PARAM_PERSISTENT_PORT)
-#define ISCSI_SESS_RECOVERY_TMO (1ULL << ISCSI_PARAM_SESS_RECOVERY_TMO)
-#define ISCSI_CONN_PORT (1ULL << ISCSI_PARAM_CONN_PORT)
-#define ISCSI_CONN_ADDRESS (1ULL << ISCSI_PARAM_CONN_ADDRESS)
-#define ISCSI_USERNAME (1ULL << ISCSI_PARAM_USERNAME)
-#define ISCSI_USERNAME_IN (1ULL << ISCSI_PARAM_USERNAME_IN)
-#define ISCSI_PASSWORD (1ULL << ISCSI_PARAM_PASSWORD)
-#define ISCSI_PASSWORD_IN (1ULL << ISCSI_PARAM_PASSWORD_IN)
-#define ISCSI_FAST_ABORT (1ULL << ISCSI_PARAM_FAST_ABORT)
-#define ISCSI_ABORT_TMO (1ULL << ISCSI_PARAM_ABORT_TMO)
-#define ISCSI_LU_RESET_TMO (1ULL << ISCSI_PARAM_LU_RESET_TMO)
-#define ISCSI_HOST_RESET_TMO (1ULL << ISCSI_PARAM_HOST_RESET_TMO)
-#define ISCSI_PING_TMO (1ULL << ISCSI_PARAM_PING_TMO)
-#define ISCSI_RECV_TMO (1ULL << ISCSI_PARAM_RECV_TMO)
-#define ISCSI_IFACE_NAME (1ULL << ISCSI_PARAM_IFACE_NAME)
-#define ISCSI_ISID (1ULL << ISCSI_PARAM_ISID)
-#define ISCSI_INITIATOR_NAME (1ULL << ISCSI_PARAM_INITIATOR_NAME)
-#define ISCSI_TGT_RESET_TMO (1ULL << ISCSI_PARAM_TGT_RESET_TMO)
-#define ISCSI_TARGET_ALIAS (1ULL << ISCSI_PARAM_TARGET_ALIAS)
-
/* iSCSI HBA params */
enum iscsi_host_param {
ISCSI_HOST_PARAM_HWADDRESS,
@@ -366,11 +419,6 @@
ISCSI_HOST_PARAM_MAX,
};
-#define ISCSI_HOST_HWADDRESS (1ULL << ISCSI_HOST_PARAM_HWADDRESS)
-#define ISCSI_HOST_INITIATOR_NAME (1ULL << ISCSI_HOST_PARAM_INITIATOR_NAME)
-#define ISCSI_HOST_NETDEV_NAME (1ULL << ISCSI_HOST_PARAM_NETDEV_NAME)
-#define ISCSI_HOST_IPADDRESS (1ULL << ISCSI_HOST_PARAM_IPADDRESS)
-
#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
#define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr)
@@ -392,6 +440,7 @@
#define CAP_DIGEST_OFFLOAD 0x1000 /* offload hdr and data digests */
#define CAP_PADDING_OFFLOAD 0x2000 /* offload padding insertion, removal,
and verification */
+#define CAP_LOGIN_OFFLOAD 0x4000 /* offload session login */
/*
* These flags describes reason of stop_conn() call
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 7d96829..5d1a758 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -281,9 +281,6 @@
* @timer: The command timer
* @tm_done: Completion indicator
* @wait_for_comp: Indicator to wait for completion of the I/O (in jiffies)
- * @start_time: Timestamp indicating the start of the I/O (in jiffies)
- * @end_time: Timestamp indicating the end of the I/O (in jiffies)
- * @last_pkt_time: Timestamp of the last frame received (in jiffies)
* @data_len: The length of the data
* @cdb_cmd: The CDB command
* @xfer_len: The transfer length
@@ -304,50 +301,46 @@
* @recov_seq: The sequence for REC or SRR
*/
struct fc_fcp_pkt {
- /* Housekeeping information */
- struct fc_lport *lp;
- u16 state;
- atomic_t ref_cnt;
spinlock_t scsi_pkt_lock;
+ atomic_t ref_cnt;
+
+ /* SCSI command and data transfer information */
+ u32 data_len;
/* SCSI I/O related information */
struct scsi_cmnd *cmd;
struct list_head list;
- /* Timeout related information */
- struct timer_list timer;
- struct completion tm_done;
- int wait_for_comp;
- unsigned long start_time;
- unsigned long end_time;
- unsigned long last_pkt_time;
-
- /* SCSI command and data transfer information */
- u32 data_len;
-
- /* Transport related veriables */
- struct fcp_cmnd cdb_cmd;
- size_t xfer_len;
- u16 xfer_ddp;
- u32 xfer_contig_end;
- u16 max_payload;
+ /* Housekeeping information */
+ struct fc_lport *lp;
+ u8 state;
/* SCSI/FCP return status */
- u32 io_status;
u8 cdb_status;
u8 status_code;
u8 scsi_comp_flags;
+ u32 io_status;
u32 req_flags;
u32 scsi_resid;
+ /* Transport related veriables */
+ size_t xfer_len;
+ struct fcp_cmnd cdb_cmd;
+ u32 xfer_contig_end;
+ u16 max_payload;
+ u16 xfer_ddp;
+
/* Associated structures */
struct fc_rport *rport;
struct fc_seq *seq_ptr;
- /* Error Processing information */
- u8 recov_retry;
+ /* Timeout/error related information */
+ struct timer_list timer;
+ int wait_for_comp;
+ u32 recov_retry;
struct fc_seq *recov_seq;
-};
+ struct completion tm_done;
+} ____cacheline_aligned_in_smp;
/*
* Structure and function definitions for managing Fibre Channel Exchanges
@@ -413,35 +406,32 @@
* sequence allocation
*/
struct fc_exch {
- struct fc_exch_mgr *em;
- struct fc_exch_pool *pool;
- u32 state;
- u16 xid;
- struct list_head ex_list;
spinlock_t ex_lock;
atomic_t ex_refcnt;
- struct delayed_work timeout_work;
+ enum fc_class class;
+ struct fc_exch_mgr *em;
+ struct fc_exch_pool *pool;
+ struct list_head ex_list;
struct fc_lport *lp;
+ u32 esb_stat;
+ u8 state;
+ u8 fh_type;
+ u8 seq_id;
+ u8 encaps;
+ u16 xid;
u16 oxid;
u16 rxid;
u32 oid;
u32 sid;
u32 did;
- u32 esb_stat;
u32 r_a_tov;
- u8 seq_id;
- u8 encaps;
u32 f_ctl;
- u8 fh_type;
- enum fc_class class;
- struct fc_seq seq;
-
+ struct fc_seq seq;
void (*resp)(struct fc_seq *, struct fc_frame *, void *);
void *arg;
-
void (*destructor)(struct fc_seq *, void *);
-
-};
+ struct delayed_work timeout_work;
+} ____cacheline_aligned_in_smp;
#define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 8c1638b..d1e95c6 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -229,6 +229,11 @@
const struct libfc_function_template *, int init_fcp);
u32 fcoe_fc_crc(struct fc_frame *fp);
int fcoe_start_io(struct sk_buff *skb);
+int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
+void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb,
+ struct net_device *netdev);
+void fcoe_wwn_to_str(u64 wwn, char *buf, int len);
+int fcoe_validate_vport_create(struct fc_vport *vport);
/**
* is_fip_mode() - returns true if FIP mode selected.
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index ee86606..6a308d42 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -142,8 +142,11 @@
u16 ex_change_count;
u16 max_route_indexes;
u8 num_phys;
+
+ u8 t2t_supp:1;
u8 configuring:1;
u8 conf_route_table:1;
+
u8 enclosure_logical_id[8];
struct ex_phy *ex_phy;
@@ -386,6 +389,11 @@
return starget_to_domain_dev(sdev->sdev_target);
}
+static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
+{
+ return &dev->sata_dev.ap->link.device[0];
+}
+
static inline struct domain_device *
cmd_to_domain_dev(struct scsi_cmnd *cmd)
{
@@ -405,6 +413,20 @@
phy->linkrate = SAS_LINK_RATE_UNKNOWN;
}
+static inline unsigned int to_sas_gpio_od(int device, int bit)
+{
+ return 3 * device + bit;
+}
+
+#ifdef CONFIG_SCSI_SAS_HOST_SMP
+int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
+#else
+static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
+{
+ return -1;
+}
+#endif
+
/* ---------- Tasks ---------- */
/*
service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
@@ -555,36 +577,14 @@
struct work_struct abort_work;
};
-extern struct kmem_cache *sas_task_cache;
-
#define SAS_TASK_STATE_PENDING 1
#define SAS_TASK_STATE_DONE 2
#define SAS_TASK_STATE_ABORTED 4
#define SAS_TASK_NEED_DEV_RESET 8
#define SAS_TASK_AT_INITIATOR 16
-static inline struct sas_task *sas_alloc_task(gfp_t flags)
-{
- struct sas_task *task = kmem_cache_zalloc(sas_task_cache, flags);
-
- if (task) {
- INIT_LIST_HEAD(&task->list);
- spin_lock_init(&task->task_state_lock);
- task->task_state_flags = SAS_TASK_STATE_PENDING;
- init_timer(&task->timer);
- init_completion(&task->completion);
- }
-
- return task;
-}
-
-static inline void sas_free_task(struct sas_task *task)
-{
- if (task) {
- BUG_ON(!list_empty(&task->list));
- kmem_cache_free(sas_task_cache, task);
- }
-}
+extern struct sas_task *sas_alloc_task(gfp_t flags);
+extern void sas_free_task(struct sas_task *task);
struct sas_domain_function_template {
/* The class calls these to notify the LLDD of an event. */
@@ -614,6 +614,10 @@
/* Phy management */
int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
+
+ /* GPIO support */
+ int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
+ u8 reg_index, u8 reg_count, u8 *write_data);
};
extern int sas_register_ha(struct sas_ha_struct *);
@@ -652,7 +656,7 @@
int sas_discover_sata(struct domain_device *);
int sas_discover_end_dev(struct domain_device *);
-void sas_unregister_dev(struct domain_device *);
+void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
void sas_init_dev(struct domain_device *);
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index e9fd022..3673d68 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -108,6 +108,7 @@
SAS_PROTOCOL_STP = 0x04,
SAS_PROTOCOL_SSP = 0x08,
SAS_PROTOCOL_ALL = 0x0E,
+ SAS_PROTOCOL_STP_ALL = SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
};
/* From the spec; local phys only */
@@ -121,6 +122,7 @@
PHY_FUNC_TX_SATA_PS_SIGNAL,
PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
PHY_FUNC_SET_LINK_RATE,
+ PHY_FUNC_GET_EVENTS,
};
/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
@@ -195,6 +197,14 @@
SAS_OREJ_RSVD_RETRY = 18,
};
+enum sas_gpio_reg_type {
+ SAS_GPIO_REG_CFG = 0,
+ SAS_GPIO_REG_RX = 1,
+ SAS_GPIO_REG_RX_GP = 2,
+ SAS_GPIO_REG_TX = 3,
+ SAS_GPIO_REG_TX_GP = 4,
+};
+
struct dev_to_host_fis {
u8 fis_type; /* 0x34 */
u8 flags;
@@ -341,7 +351,12 @@
u8 conf_route_table:1;
u8 configuring:1;
- u8 _r_b:6;
+ u8 config_others:1;
+ u8 orej_retry_supp:1;
+ u8 stp_cont_awt:1;
+ u8 self_config:1;
+ u8 zone_config:1;
+ u8 t2t_supp:1;
u8 _r_c;
@@ -528,7 +543,12 @@
u8 _r_a;
u8 num_phys;
- u8 _r_b:6;
+ u8 t2t_supp:1;
+ u8 zone_config:1;
+ u8 self_config:1;
+ u8 stp_cont_awt:1;
+ u8 orej_retry_supp:1;
+ u8 config_others:1;
u8 configuring:1;
u8 conf_route_table:1;
diff --git a/include/scsi/scsi_bsg_iscsi.h b/include/scsi/scsi_bsg_iscsi.h
new file mode 100644
index 0000000..fd5689d
--- /dev/null
+++ b/include/scsi/scsi_bsg_iscsi.h
@@ -0,0 +1,110 @@
+/*
+ * iSCSI Transport BSG Interface
+ *
+ * Copyright (C) 2009 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef SCSI_BSG_ISCSI_H
+#define SCSI_BSG_ISCSI_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+#include <scsi/scsi.h>
+
+/*
+ * iSCSI Transport SGIO v4 BSG Message Support
+ */
+
+/* Default BSG request timeout (in seconds) */
+#define ISCSI_DEFAULT_BSG_TIMEOUT (10 * HZ)
+
+
+/*
+ * Request Message Codes supported by the iSCSI Transport
+ */
+
+/* define the class masks for the message codes */
+#define ISCSI_BSG_CLS_MASK 0xF0000000 /* find object class */
+#define ISCSI_BSG_HST_MASK 0x80000000 /* iscsi host class */
+
+/* iscsi host Message Codes */
+#define ISCSI_BSG_HST_VENDOR (ISCSI_BSG_HST_MASK | 0x000000FF)
+
+
+/*
+ * iSCSI Host Messages
+ */
+
+/* ISCSI_BSG_HST_VENDOR : */
+
+/* Request:
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ * formatting requirements specified in scsi_netlink.h
+ */
+struct iscsi_bsg_host_vendor {
+ /*
+ * Identifies the vendor that the message is formatted for. This
+ * should be the recipient of the message.
+ */
+ uint64_t vendor_id;
+
+ /* start of vendor command area */
+ uint32_t vendor_cmd[0];
+};
+
+/* Response:
+ */
+struct iscsi_bsg_host_vendor_reply {
+ /* start of vendor response area */
+ uint32_t vendor_rsp[0];
+};
+
+
+/* request (CDB) structure of the sg_io_v4 */
+struct iscsi_bsg_request {
+ uint32_t msgcode;
+ union {
+ struct iscsi_bsg_host_vendor h_vendor;
+ } rqst_data;
+} __attribute__((packed));
+
+
+/* response (request sense data) structure of the sg_io_v4 */
+struct iscsi_bsg_reply {
+ /*
+ * The completion result. Result exists in two forms:
+ * if negative, it is an -Exxx system errno value. There will
+ * be no further reply information supplied.
+ * else, it's the 4-byte scsi error result, with driver, host,
+ * msg and status fields. The per-msgcode reply structure
+ * will contain valid data.
+ */
+ uint32_t result;
+
+ /* If there was reply_payload, how much was recevied ? */
+ uint32_t reply_payload_rcv_len;
+
+ union {
+ struct iscsi_bsg_host_vendor_reply vendor_reply;
+ } reply_data;
+};
+
+
+#endif /* SCSI_BSG_ISCSI_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index d371c3c..5591ed5 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -197,6 +197,7 @@
int (*activate)(struct scsi_device *, activate_complete, void *);
int (*prep_fn)(struct scsi_device *, struct request *);
int (*set_params)(struct scsi_device *, const char *);
+ bool (*match)(struct scsi_device *);
};
struct scsi_dh_data {
@@ -471,6 +472,11 @@
return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
}
+static inline int scsi_device_tpgs(struct scsi_device *sdev)
+{
+ return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
+}
+
#define MODULE_ALIAS_SCSI_DEVICE(type) \
MODULE_ALIAS("scsi:t-" __stringify(type) "*")
#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index f1f2644..50266c9 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -355,6 +355,19 @@
*/
enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
+ /* This is an optional routine that allows transport to initiate
+ * LLD adapter or firmware reset using sysfs attribute.
+ *
+ * Return values: 0 on success, -ve value on failure.
+ *
+ * Status: OPTIONAL
+ */
+
+ int (*host_reset)(struct Scsi_Host *shost, int reset_type);
+#define SCSI_ADAPTER_RESET 1
+#define SCSI_FIRMWARE_RESET 2
+
+
/*
* Name of proc directory
*/
@@ -791,7 +804,8 @@
**/
static inline int scsi_host_scan_allowed(struct Scsi_Host *shost)
{
- return shost->shost_state == SHOST_RUNNING;
+ return shost->shost_state == SHOST_RUNNING ||
+ shost->shost_state == SHOST_RECOVERY;
}
extern void scsi_unblock_requests(struct Scsi_Host *);
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index bf8f529..5994bcc 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -37,6 +37,8 @@
struct iscsi_conn;
struct iscsi_task;
struct sockaddr;
+struct iscsi_iface;
+struct bsg_job;
/**
* struct iscsi_transport - iSCSI Transport template
@@ -84,9 +86,7 @@
struct module *owner;
char *name;
unsigned int caps;
- /* LLD sets this to indicate what values it can export to sysfs */
- uint64_t param_mask;
- uint64_t host_param_mask;
+
struct iscsi_cls_session *(*create_session) (struct iscsi_endpoint *ep,
uint16_t cmds_max, uint16_t qdepth,
uint32_t sn);
@@ -137,6 +137,13 @@
int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
uint32_t enable, struct sockaddr *dst_addr);
int (*set_path) (struct Scsi_Host *shost, struct iscsi_path *params);
+ int (*set_iface_param) (struct Scsi_Host *shost, void *data,
+ uint32_t len);
+ int (*get_iface_param) (struct iscsi_iface *iface,
+ enum iscsi_param_type param_type,
+ int param, char *buf);
+ mode_t (*attr_is_visible)(int param_type, int param);
+ int (*bsg_request)(struct bsg_job *job);
};
/*
@@ -150,6 +157,8 @@
*/
extern void iscsi_conn_error_event(struct iscsi_cls_conn *conn,
enum iscsi_err error);
+extern void iscsi_conn_login_event(struct iscsi_cls_conn *conn,
+ enum iscsi_conn_state state);
extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size);
@@ -171,6 +180,9 @@
#define iscsi_dev_to_conn(_dev) \
container_of(_dev, struct iscsi_cls_conn, dev)
+#define transport_class_to_conn(_cdev) \
+ iscsi_dev_to_conn(_cdev->parent)
+
#define iscsi_conn_to_session(_conn) \
iscsi_dev_to_session(_conn->dev.parent)
@@ -197,6 +209,7 @@
struct delayed_work recovery_work;
unsigned int target_id;
+ bool ida_used;
int state;
int sid; /* session id */
@@ -207,6 +220,9 @@
#define iscsi_dev_to_session(_dev) \
container_of(_dev, struct iscsi_cls_session, dev)
+#define transport_class_to_session(_cdev) \
+ iscsi_dev_to_session(_cdev->parent)
+
#define iscsi_session_to_shost(_session) \
dev_to_shost(_session->dev.parent)
@@ -216,8 +232,12 @@
struct iscsi_cls_host {
atomic_t nr_scans;
struct mutex mutex;
+ struct request_queue *bsg_q;
};
+#define iscsi_job_to_shost(_job) \
+ dev_to_shost(_job->dev)
+
extern void iscsi_host_for_each_session(struct Scsi_Host *shost,
void (*fn)(struct iscsi_cls_session *));
@@ -228,6 +248,20 @@
struct iscsi_cls_conn *conn;
};
+struct iscsi_iface {
+ struct device dev;
+ struct iscsi_transport *transport;
+ uint32_t iface_type; /* IPv4 or IPv6 */
+ uint32_t iface_num; /* iface number, 0 - n */
+ void *dd_data; /* LLD private data */
+};
+
+#define iscsi_dev_to_iface(_dev) \
+ container_of(_dev, struct iscsi_iface, dev)
+
+#define iscsi_iface_to_shost(_iface) \
+ dev_to_shost(_iface->dev.parent)
+
/*
* session and connection functions that can be used by HW iSCSI LLDs
*/
@@ -238,6 +272,7 @@
dev_printk(prefix, &(_cls_conn)->dev, fmt, ##a)
extern int iscsi_session_chkready(struct iscsi_cls_session *session);
+extern int iscsi_is_session_online(struct iscsi_cls_session *session);
extern struct iscsi_cls_session *iscsi_alloc_session(struct Scsi_Host *shost,
struct iscsi_transport *transport, int dd_size);
extern int iscsi_add_session(struct iscsi_cls_session *session,
@@ -261,5 +296,11 @@
extern void iscsi_destroy_endpoint(struct iscsi_endpoint *ep);
extern struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle);
extern int iscsi_block_scsi_eh(struct scsi_cmnd *cmd);
+extern struct iscsi_iface *iscsi_create_iface(struct Scsi_Host *shost,
+ struct iscsi_transport *t,
+ uint32_t iface_type,
+ uint32_t iface_num, int dd_size);
+extern void iscsi_destroy_iface(struct iscsi_iface *iface);
+extern struct iscsi_iface *iscsi_lookup_iface(int handle);
#endif
diff --git a/include/sound/adau1373.h b/include/sound/adau1373.h
new file mode 100644
index 0000000..1b19c76
--- /dev/null
+++ b/include/sound/adau1373.h
@@ -0,0 +1,34 @@
+/*
+ * Analog Devices ADAU1373 Audio Codec drive
+ *
+ * Copyright 2011 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __SOUND_ADAU1373_H__
+#define __SOUND_ADAU1373_H__
+
+enum adau1373_micbias_voltage {
+ ADAU1373_MICBIAS_2_9V = 0,
+ ADAU1373_MICBIAS_2_2V = 1,
+ ADAU1373_MICBIAS_2_6V = 2,
+ ADAU1373_MICBIAS_1_8V = 3,
+};
+
+#define ADAU1373_DRC_SIZE 13
+
+struct adau1373_platform_data {
+ bool input_differential[4];
+ bool lineout_differential;
+ bool lineout_ground_sense;
+
+ unsigned int num_drc;
+ uint8_t drc_setting[3][ADAU1373_DRC_SIZE];
+
+ enum adau1373_micbias_voltage micbias1;
+ enum adau1373_micbias_voltage micbias2;
+};
+
+#endif
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 5d6074f..a2e4ff5 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -706,7 +706,7 @@
* *
****************************************************************************/
-#define SNDRV_CTL_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 6)
+#define SNDRV_CTL_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 7)
struct snd_ctl_card_info {
int card; /* card number */
@@ -803,6 +803,8 @@
unsigned int items; /* R: number of items */
unsigned int item; /* W: item number */
char name[64]; /* R: value name */
+ __u64 names_ptr; /* W: names list (ELEM_ADD only) */
+ unsigned int names_length;
} enumerated;
unsigned char reserved[128];
} value;
diff --git a/include/sound/core.h b/include/sound/core.h
index 1fa2407..91d5138 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -326,9 +326,9 @@
/* --- */
#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
+__printf(4, 5)
void __snd_printk(unsigned int level, const char *file, int line,
- const char *format, ...)
- __attribute__ ((format (printf, 4, 5)));
+ const char *format, ...);
#else
#define __snd_printk(level, file, line, format, args...) \
printk(format, ##args)
diff --git a/include/sound/info.h b/include/sound/info.h
index 4e94cf1..5492cc4 100644
--- a/include/sound/info.h
+++ b/include/sound/info.h
@@ -110,8 +110,8 @@
static inline void snd_card_info_read_oss(struct snd_info_buffer *buffer) {}
#endif
-int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...) \
- __attribute__ ((format (printf, 2, 3)));
+__printf(2, 3)
+int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...);
int snd_info_init(void);
int snd_info_done(void);
diff --git a/include/sound/initval.h b/include/sound/initval.h
index 1daa6dff..f99a0d2 100644
--- a/include/sound/initval.h
+++ b/include/sound/initval.h
@@ -62,7 +62,7 @@
{
while (*irq_table != -1) {
if (!request_irq(*irq_table, snd_legacy_empty_irq_handler,
- IRQF_DISABLED | IRQF_PROBE_SHARED, "ALSA Test IRQ",
+ IRQF_PROBE_SHARED, "ALSA Test IRQ",
(void *) irq_table)) {
free_irq(*irq_table, (void *) irq_table);
return *irq_table;
diff --git a/include/sound/jack.h b/include/sound/jack.h
index c140fc7..63c7907 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -42,6 +42,7 @@
SND_JACK_MECHANICAL = 0x0008, /* If detected separately */
SND_JACK_VIDEOOUT = 0x0010,
SND_JACK_AVOUT = SND_JACK_LINEOUT | SND_JACK_VIDEOOUT,
+ SND_JACK_LINEIN = 0x0020,
/* Kept separate from switches to facilitate implementation */
SND_JACK_BTN_0 = 0x4000,
diff --git a/include/sound/mpu401.h b/include/sound/mpu401.h
index 1f1d53f..20230db 100644
--- a/include/sound/mpu401.h
+++ b/include/sound/mpu401.h
@@ -50,7 +50,10 @@
#define MPU401_INFO_INTEGRATED (1 << 2) /* integrated h/w port */
#define MPU401_INFO_MMIO (1 << 3) /* MMIO access */
#define MPU401_INFO_TX_IRQ (1 << 4) /* independent TX irq */
+#define MPU401_INFO_IRQ_HOOK (1 << 5) /* mpu401 irq handler is called
+ from driver irq handler */
#define MPU401_INFO_NO_ACK (1 << 6) /* No ACK cmd needed */
+#define MPU401_INFO_USE_TIMER (1 << 15) /* internal */
#define MPU401_MODE_BIT_INPUT 0
#define MPU401_MODE_BIT_OUTPUT 1
@@ -73,8 +76,7 @@
unsigned long port; /* base port of MPU-401 chip */
unsigned long cport; /* port + 1 (usually) */
struct resource *res; /* port resource */
- int irq; /* IRQ number of MPU-401 chip (-1 = poll) */
- int irq_flags;
+ int irq; /* IRQ number of MPU-401 chip */
unsigned long mode; /* MPU401_MODE_XXXX */
int timer_invoked;
@@ -131,7 +133,6 @@
unsigned long port,
unsigned int info_flags,
int irq,
- int irq_flags,
struct snd_rawmidi ** rrawmidi);
#endif /* __SOUND_MPU401_H */
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 54cb079..0cf91b2 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -825,6 +825,8 @@
int snd_pcm_hw_constraint_pow2(struct snd_pcm_runtime *runtime,
unsigned int cond,
snd_pcm_hw_param_t var);
+int snd_pcm_hw_rule_noresample(struct snd_pcm_runtime *runtime,
+ unsigned int base_rate);
int snd_pcm_hw_rule_add(struct snd_pcm_runtime *runtime,
unsigned int cond,
int var,
@@ -1035,6 +1037,8 @@
atomic_dec(&substream->mmap_count);
}
+int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *area);
/* mmap for io-memory area */
#if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_ALPHA)
#define SNDRV_PCM_INFO_MMAP_IOMEM SNDRV_PCM_INFO_MMAP
diff --git a/include/sound/saif.h b/include/sound/saif.h
new file mode 100644
index 0000000..d0e0de7
--- /dev/null
+++ b/include/sound/saif.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOUND_SAIF_H__
+#define __SOUND_SAIF_H__
+
+struct mxs_saif_platform_data {
+ int (*init) (void);
+ int (*get_master_id) (unsigned int saif_id);
+};
+#endif
diff --git a/include/sound/seq_kernel.h b/include/sound/seq_kernel.h
index 3d9afb6..f352a98 100644
--- a/include/sound/seq_kernel.h
+++ b/include/sound/seq_kernel.h
@@ -75,9 +75,9 @@
};
/* interface for kernel client */
+__printf(3, 4)
int snd_seq_create_kernel_client(struct snd_card *card, int client_index,
- const char *name_fmt, ...)
- __attribute__ ((format (printf, 3, 4)));
+ const char *name_fmt, ...);
int snd_seq_delete_kernel_client(int client);
int snd_seq_kernel_client_enqueue(int client, struct snd_seq_event *ev, int atomic, int hop);
int snd_seq_kernel_client_dispatch(int client, struct snd_seq_event *ev, int atomic, int hop);
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 5ad5f3a..2413acc 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -24,13 +24,13 @@
* Describes the physical PCM data formating and clocking. Add new formats
* to the end.
*/
-#define SND_SOC_DAIFMT_I2S 0 /* I2S mode */
-#define SND_SOC_DAIFMT_RIGHT_J 1 /* Right Justified mode */
-#define SND_SOC_DAIFMT_LEFT_J 2 /* Left Justified mode */
-#define SND_SOC_DAIFMT_DSP_A 3 /* L data MSB after FRM LRC */
-#define SND_SOC_DAIFMT_DSP_B 4 /* L data MSB during FRM LRC */
-#define SND_SOC_DAIFMT_AC97 5 /* AC97 */
-#define SND_SOC_DAIFMT_PDM 6 /* Pulse density modulation */
+#define SND_SOC_DAIFMT_I2S 1 /* I2S mode */
+#define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */
+#define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */
+#define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */
+#define SND_SOC_DAIFMT_AC97 6 /* AC97 */
+#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */
/* left and right justified also known as MSB and LSB respectively */
#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
@@ -42,8 +42,8 @@
* DAI bit clocks can be be gated (disabled) when the DAI is not
* sending or receiving PCM data in a frame. This can be used to save power.
*/
-#define SND_SOC_DAIFMT_CONT (0 << 4) /* continuous clock */
-#define SND_SOC_DAIFMT_GATED (1 << 4) /* clock is gated */
+#define SND_SOC_DAIFMT_CONT (1 << 4) /* continuous clock */
+#define SND_SOC_DAIFMT_GATED (2 << 4) /* clock is gated */
/*
* DAI hardware signal inversions.
@@ -51,10 +51,10 @@
* Specifies whether the DAI can also support inverted clocks for the specified
* format.
*/
-#define SND_SOC_DAIFMT_NB_NF (0 << 8) /* normal bit clock + frame */
-#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal BCLK + inv FRM */
-#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert BCLK + nor FRM */
-#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert BCLK + FRM */
+#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */
+#define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */
/*
* DAI hardware clock masters.
@@ -63,10 +63,10 @@
* i.e. if the codec is clk and FRM master then the interface is
* clk and frame slave.
*/
-#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & FRM master */
-#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & FRM master */
-#define SND_SOC_DAIFMT_CBM_CFS (2 << 12) /* codec clk master & frame slave */
-#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & FRM slave */
+#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */
+#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */
+#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */
#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
@@ -242,6 +242,9 @@
void *playback_dma_data;
void *capture_dma_data;
+ /* Symmetry data - only valid if symmetry is being enforced */
+ unsigned int rate;
+
/* parent platform/codec */
union {
struct snd_soc_platform *platform;
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index e0583b7..17a4c17 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -381,6 +381,9 @@
int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm,
const char *pin);
+/* Mostly internal - should not normally be used */
+void dapm_mark_dirty(struct snd_soc_dapm_widget *w, const char *reason);
+
/* dapm widget types */
enum snd_soc_dapm_type {
snd_soc_dapm_input = 0, /* input pin */
@@ -473,6 +476,8 @@
unsigned char ext:1; /* has external widgets */
unsigned char force:1; /* force state */
unsigned char ignore_suspend:1; /* kept enabled over suspend */
+ unsigned char new_power:1; /* power from this run */
+ unsigned char power_checked:1; /* power checked this run */
int subseq; /* sort within widget type */
int (*power_check)(struct snd_soc_dapm_widget *w);
@@ -492,6 +497,9 @@
/* used during DAPM updates */
struct list_head power_list;
+ struct list_head dirty;
+ int inputs;
+ int outputs;
};
struct snd_soc_dapm_update {
@@ -524,6 +532,8 @@
enum snd_soc_bias_level target_bias_level;
struct list_head list;
+ int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_dapm;
#endif
@@ -535,4 +545,10 @@
struct snd_soc_dapm_widget *widgets[0];
};
+struct snd_soc_dapm_stats {
+ int power_checks;
+ int path_checks;
+ int neighbour_checks;
+};
+
#endif
diff --git a/include/sound/soc.h b/include/sound/soc.h
index aa19f5a..11cfb59 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -19,6 +19,7 @@
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/regmap.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/control.h>
@@ -27,13 +28,20 @@
/*
* Convenience kcontrol builders
*/
-#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \
+#define SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, xmax, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = xshift, .rshift = xshift, .max = xmax, \
- .platform_max = xmax, .invert = xinvert})
+ {.reg = xreg, .rreg = xreg, .shift = shift_left, \
+ .rshift = shift_right, .max = xmax, .platform_max = xmax, \
+ .invert = xinvert})
+#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \
+ SOC_DOUBLE_VALUE(xreg, xshift, xshift, xmax, xinvert)
#define SOC_SINGLE_VALUE_EXT(xreg, xmax, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .max = xmax, .platform_max = xmax, .invert = xinvert})
+#define SOC_DOUBLE_R_VALUE(xlreg, xrreg, xshift, xmax, xinvert) \
+ ((unsigned long)&(struct soc_mixer_control) \
+ {.reg = xlreg, .rreg = xrreg, .shift = xshift, .rshift = xshift, \
+ .max = xmax, .platform_max = xmax, .invert = xinvert})
#define SOC_SINGLE(xname, reg, shift, max, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
@@ -47,40 +55,36 @@
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
.put = snd_soc_put_volsw, \
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) }
-#define SOC_DOUBLE(xname, xreg, shift_left, shift_right, xmax, xinvert) \
+#define SOC_DOUBLE(xname, reg, shift_left, shift_right, max, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
.put = snd_soc_put_volsw, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = shift_left, .rshift = shift_right, \
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ .private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
+ max, invert) }
#define SOC_DOUBLE_R(xname, reg_left, reg_right, xshift, xmax, xinvert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
- .info = snd_soc_info_volsw_2r, \
- .get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
-#define SOC_DOUBLE_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert, tlv_array) \
+ .info = snd_soc_info_volsw, \
+ .get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
+ .private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+ xmax, xinvert) }
+#define SOC_DOUBLE_TLV(xname, reg, shift_left, shift_right, max, invert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
.put = snd_soc_put_volsw, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = shift_left, .rshift = shift_right,\
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ .private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
+ max, invert) }
#define SOC_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw_2r, \
- .get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ .info = snd_soc_info_volsw, \
+ .get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
+ .private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+ xmax, xinvert) }
#define SOC_DOUBLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
@@ -120,14 +124,13 @@
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
-#define SOC_DOUBLE_EXT(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+#define SOC_DOUBLE_EXT(xname, reg, shift_left, shift_right, max, invert,\
xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = shift_left, .rshift = shift_right, \
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ .private_value = \
+ SOC_DOUBLE_VALUE(reg, shift_left, shift_right, max, invert) }
#define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
xhandler_get, xhandler_put, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -145,20 +148,18 @@
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = shift_left, .rshift = shift_right, \
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ .private_value = SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, \
+ xmax, xinvert) }
#define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
xhandler_get, xhandler_put, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw_2r, \
+ .info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
+ .private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+ xmax, xinvert) }
#define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_bool_ext, \
@@ -260,6 +261,7 @@
enum snd_soc_control_type {
SND_SOC_I2C = 1,
SND_SOC_SPI,
+ SND_SOC_REGMAP,
};
enum snd_soc_compress_type {
@@ -274,7 +276,7 @@
};
int snd_soc_codec_set_sysclk(struct snd_soc_codec *codec, int clk_id,
- unsigned int freq, int dir);
+ int source, unsigned int freq, int dir);
int snd_soc_codec_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
unsigned int freq_in, unsigned int freq_out);
@@ -391,12 +393,8 @@
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
-int snd_soc_info_volsw_2r(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo);
-int snd_soc_get_volsw_2r(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol);
-int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol);
+#define snd_soc_get_volsw_2r snd_soc_get_volsw
+#define snd_soc_put_volsw_2r snd_soc_put_volsw
int snd_soc_info_volsw_s8(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol,
@@ -576,9 +574,11 @@
const void *reg_def_copy;
const struct snd_soc_cache_ops *cache_ops;
struct mutex cache_rw_mutex;
+ int val_bytes;
/* dapm */
struct snd_soc_dapm_context dapm;
+ unsigned int ignore_pmdown_time:1; /* pmdown_time is ignored at stop */
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_codec_root;
@@ -607,7 +607,7 @@
/* codec wide operations */
int (*set_sysclk)(struct snd_soc_codec *codec,
- int clk_id, unsigned int freq, int dir);
+ int clk_id, int source, unsigned int freq, int dir);
int (*set_pll)(struct snd_soc_codec *codec, int pll_id, int source,
unsigned int freq_in, unsigned int freq_out);
@@ -619,7 +619,7 @@
int (*volatile_register)(struct snd_soc_codec *, unsigned int);
int (*readable_register)(struct snd_soc_codec *, unsigned int);
int (*writable_register)(struct snd_soc_codec *, unsigned int);
- short reg_cache_size;
+ unsigned int reg_cache_size;
short reg_cache_step;
short reg_word_size;
const void *reg_cache_default;
@@ -630,10 +630,14 @@
/* codec bias level */
int (*set_bias_level)(struct snd_soc_codec *,
enum snd_soc_bias_level level);
+ bool idle_bias_off;
void (*seq_notifier)(struct snd_soc_dapm_context *,
enum snd_soc_dapm_type, int);
+ /* codec stream completion event */
+ int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
/* probe ordering - for components with runtime dependencies */
int probe_order;
int remove_order;
@@ -669,6 +673,9 @@
/* platform stream ops */
struct snd_pcm_ops *ops;
+ /* platform stream completion event */
+ int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
/* probe ordering - for components with runtime dependencies */
int probe_order;
int remove_order;
@@ -703,6 +710,8 @@
const char *cpu_dai_name;
const char *codec_dai_name;
+ unsigned int dai_fmt; /* format to set on init */
+
/* Keep DAI active over suspend */
unsigned int ignore_suspend:1;
@@ -815,9 +824,11 @@
struct list_head widgets;
struct list_head paths;
struct list_head dapm_list;
+ struct list_head dapm_dirty;
/* Generic DAPM context for the card */
struct snd_soc_dapm_context dapm;
+ struct snd_soc_dapm_stats dapm_stats;
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_card_root;
@@ -840,8 +851,6 @@
unsigned int complete:1;
unsigned int dev_registered:1;
- /* Symmetry data - only valid if symmetry is being enforced */
- unsigned int rate;
long pmdown_time;
/* runtime devices */
@@ -936,6 +945,18 @@
INIT_LIST_HEAD(&card->dapm_list);
}
+static inline bool snd_soc_volsw_is_stereo(struct soc_mixer_control *mc)
+{
+ if (mc->reg == mc->rreg && mc->shift == mc->rshift)
+ return 0;
+ /*
+ * mc->reg == mc->rreg && mc->shift != mc->rshift, or
+ * mc->reg != mc->rreg means that the control is
+ * stereo (bits in one register or in two registers)
+ */
+ return 1;
+}
+
int snd_soc_util_init(void);
void snd_soc_util_exit(void);
diff --git a/include/sound/tpa6130a2-plat.h b/include/sound/tpa6130a2-plat.h
index 89beccb5..4cc1093 100644
--- a/include/sound/tpa6130a2-plat.h
+++ b/include/sound/tpa6130a2-plat.h
@@ -23,13 +23,7 @@
#ifndef TPA6130A2_PLAT_H
#define TPA6130A2_PLAT_H
-enum tpa_model {
- TPA6130A2,
- TPA6140A2,
-};
-
struct tpa6130a2_platform_data {
- enum tpa_model id;
int power_gpio;
};
diff --git a/include/sound/wm1250-ev1.h b/include/sound/wm1250-ev1.h
new file mode 100644
index 0000000..7dff828
--- /dev/null
+++ b/include/sound/wm1250-ev1.h
@@ -0,0 +1,27 @@
+/*
+ * linux/sound/wm1250-ev1.h - Platform data for WM1250-EV1
+ *
+ * Copyright 2011 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM1250_EV1_H
+#define __LINUX_SND_WM1250_EV1_H
+
+#define WM1250_EV1_NUM_GPIOS 5
+
+#define WM1250_EV1_GPIO_CLK_ENA 0
+#define WM1250_EV1_GPIO_CLK_SEL0 1
+#define WM1250_EV1_GPIO_CLK_SEL1 2
+#define WM1250_EV1_GPIO_OSR 3
+#define WM1250_EV1_GPIO_MASTER 4
+
+
+struct wm1250_ev1_pdata {
+ int gpios[WM1250_EV1_NUM_GPIOS];
+};
+
+#endif
diff --git a/include/sound/wm5100.h b/include/sound/wm5100.h
new file mode 100644
index 0000000..617d0c4
--- /dev/null
+++ b/include/sound/wm5100.h
@@ -0,0 +1,59 @@
+/*
+ * linux/sound/wm5100.h -- Platform data for WM5100
+ *
+ * Copyright 2011 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM5100_H
+#define __LINUX_SND_WM5100_H
+
+enum wm5100_in_mode {
+ WM5100_IN_SE = 0,
+ WM5100_IN_DIFF = 1,
+ WM5100_IN_DMIC = 2,
+};
+
+enum wm5100_dmic_sup {
+ WM5100_DMIC_SUP_MICVDD = 0,
+ WM5100_DMIC_SUP_MICBIAS1 = 1,
+ WM5100_DMIC_SUP_MICBIAS2 = 2,
+ WM5100_DMIC_SUP_MICBIAS3 = 3,
+};
+
+enum wm5100_micdet_bias {
+ WM5100_MICDET_MICBIAS1 = 0,
+ WM5100_MICDET_MICBIAS2 = 1,
+ WM5100_MICDET_MICBIAS3 = 2,
+};
+
+struct wm5100_jack_mode {
+ enum wm5100_micdet_bias bias;
+ int hp_pol;
+ int micd_src;
+};
+
+#define WM5100_GPIO_SET 0x10000
+
+struct wm5100_pdata {
+ int reset; /** GPIO controlling /RESET, if any */
+ int ldo_ena; /** GPIO controlling LODENA, if any */
+ int hp_pol; /** GPIO controlling headset polarity, if any */
+ int irq_flags;
+ int gpio_base;
+
+ struct wm5100_jack_mode jack_modes[2];
+
+ /* Input pin mode selection */
+ enum wm5100_in_mode in_mode[4];
+
+ /* DMIC supply selection */
+ enum wm5100_dmic_sup dmic_sup[4];
+
+ int gpio_defaults[6];
+};
+
+#endif
diff --git a/include/trace/events/asoc.h b/include/trace/events/asoc.h
index 603f5a0..ab26f8a 100644
--- a/include/trace/events/asoc.h
+++ b/include/trace/events/asoc.h
@@ -216,6 +216,31 @@
);
+TRACE_EVENT(snd_soc_dapm_walk_done,
+
+ TP_PROTO(struct snd_soc_card *card),
+
+ TP_ARGS(card),
+
+ TP_STRUCT__entry(
+ __string( name, card->name )
+ __field( int, power_checks )
+ __field( int, path_checks )
+ __field( int, neighbour_checks )
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, card->name);
+ __entry->power_checks = card->dapm_stats.power_checks;
+ __entry->path_checks = card->dapm_stats.path_checks;
+ __entry->neighbour_checks = card->dapm_stats.neighbour_checks;
+ ),
+
+ TP_printk("%s: checks %d power, %d path, %d neighbour",
+ __get_str(name), (int)__entry->power_checks,
+ (int)__entry->path_checks, (int)__entry->neighbour_checks)
+);
+
TRACE_EVENT(snd_soc_jack_irq,
TP_PROTO(const char *name),
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index b50a547..748ff7c 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -9,9 +9,12 @@
struct ext4_allocation_context;
struct ext4_allocation_request;
+struct ext4_extent;
struct ext4_prealloc_space;
struct ext4_inode_info;
struct mpage_da_data;
+struct ext4_map_blocks;
+struct ext4_extent;
#define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
@@ -1032,9 +1035,9 @@
);
TRACE_EVENT(ext4_da_update_reserve_space,
- TP_PROTO(struct inode *inode, int used_blocks),
+ TP_PROTO(struct inode *inode, int used_blocks, int quota_claim),
- TP_ARGS(inode, used_blocks),
+ TP_ARGS(inode, used_blocks, quota_claim),
TP_STRUCT__entry(
__field( dev_t, dev )
@@ -1045,6 +1048,7 @@
__field( int, reserved_data_blocks )
__field( int, reserved_meta_blocks )
__field( int, allocated_meta_blocks )
+ __field( int, quota_claim )
),
TP_fast_assign(
@@ -1053,19 +1057,24 @@
__entry->mode = inode->i_mode;
__entry->i_blocks = inode->i_blocks;
__entry->used_blocks = used_blocks;
- __entry->reserved_data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
- __entry->reserved_meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
- __entry->allocated_meta_blocks = EXT4_I(inode)->i_allocated_meta_blocks;
+ __entry->reserved_data_blocks =
+ EXT4_I(inode)->i_reserved_data_blocks;
+ __entry->reserved_meta_blocks =
+ EXT4_I(inode)->i_reserved_meta_blocks;
+ __entry->allocated_meta_blocks =
+ EXT4_I(inode)->i_allocated_meta_blocks;
+ __entry->quota_claim = quota_claim;
),
TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu used_blocks %d "
"reserved_data_blocks %d reserved_meta_blocks %d "
- "allocated_meta_blocks %d",
+ "allocated_meta_blocks %d quota_claim %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->mode, __entry->i_blocks,
__entry->used_blocks, __entry->reserved_data_blocks,
- __entry->reserved_meta_blocks, __entry->allocated_meta_blocks)
+ __entry->reserved_meta_blocks, __entry->allocated_meta_blocks,
+ __entry->quota_claim)
);
TRACE_EVENT(ext4_da_reserve_space,
@@ -1386,6 +1395,87 @@
TP_ARGS(inode)
);
+/* 'ux' is the uninitialized extent. */
+TRACE_EVENT(ext4_ext_convert_to_initialized_enter,
+ TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+ struct ext4_extent *ux),
+
+ TP_ARGS(inode, map, ux),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, m_lblk )
+ __field( unsigned, m_len )
+ __field( ext4_lblk_t, u_lblk )
+ __field( unsigned, u_len )
+ __field( ext4_fsblk_t, u_pblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->m_lblk = map->m_lblk;
+ __entry->m_len = map->m_len;
+ __entry->u_lblk = le32_to_cpu(ux->ee_block);
+ __entry->u_len = ext4_ext_get_actual_len(ux);
+ __entry->u_pblk = ext4_ext_pblock(ux);
+ ),
+
+ TP_printk("dev %d,%d ino %lu m_lblk %u m_len %u u_lblk %u u_len %u "
+ "u_pblk %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ __entry->m_lblk, __entry->m_len,
+ __entry->u_lblk, __entry->u_len, __entry->u_pblk)
+);
+
+/*
+ * 'ux' is the uninitialized extent.
+ * 'ix' is the initialized extent to which blocks are transferred.
+ */
+TRACE_EVENT(ext4_ext_convert_to_initialized_fastpath,
+ TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+ struct ext4_extent *ux, struct ext4_extent *ix),
+
+ TP_ARGS(inode, map, ux, ix),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, m_lblk )
+ __field( unsigned, m_len )
+ __field( ext4_lblk_t, u_lblk )
+ __field( unsigned, u_len )
+ __field( ext4_fsblk_t, u_pblk )
+ __field( ext4_lblk_t, i_lblk )
+ __field( unsigned, i_len )
+ __field( ext4_fsblk_t, i_pblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->m_lblk = map->m_lblk;
+ __entry->m_len = map->m_len;
+ __entry->u_lblk = le32_to_cpu(ux->ee_block);
+ __entry->u_len = ext4_ext_get_actual_len(ux);
+ __entry->u_pblk = ext4_ext_pblock(ux);
+ __entry->i_lblk = le32_to_cpu(ix->ee_block);
+ __entry->i_len = ext4_ext_get_actual_len(ix);
+ __entry->i_pblk = ext4_ext_pblock(ix);
+ ),
+
+ TP_printk("dev %d,%d ino %lu m_lblk %u m_len %u "
+ "u_lblk %u u_len %u u_pblk %llu "
+ "i_lblk %u i_len %u i_pblk %llu ",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ __entry->m_lblk, __entry->m_len,
+ __entry->u_lblk, __entry->u_len, __entry->u_pblk,
+ __entry->i_lblk, __entry->i_len, __entry->i_pblk)
+);
+
DECLARE_EVENT_CLASS(ext4__map_blocks_enter,
TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
unsigned int len, unsigned int flags),
@@ -1589,6 +1679,382 @@
TP_ARGS(sb, group, start, len)
);
+TRACE_EVENT(ext4_ext_handle_uninitialized_extents,
+ TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+ unsigned int allocated, ext4_fsblk_t newblock),
+
+ TP_ARGS(inode, map, allocated, newblock),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( ext4_fsblk_t, pblk )
+ __field( unsigned int, len )
+ __field( int, flags )
+ __field( unsigned int, allocated )
+ __field( ext4_fsblk_t, newblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = map->m_lblk;
+ __entry->pblk = map->m_pblk;
+ __entry->len = map->m_len;
+ __entry->flags = map->m_flags;
+ __entry->allocated = allocated;
+ __entry->newblk = newblock;
+ ),
+
+ TP_printk("dev %d,%d ino %lu m_lblk %u m_pblk %llu m_len %u flags %d"
+ "allocated %d newblock %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk, (unsigned long long) __entry->pblk,
+ __entry->len, __entry->flags,
+ (unsigned int) __entry->allocated,
+ (unsigned long long) __entry->newblk)
+);
+
+TRACE_EVENT(ext4_get_implied_cluster_alloc_exit,
+ TP_PROTO(struct super_block *sb, struct ext4_map_blocks *map, int ret),
+
+ TP_ARGS(sb, map, ret),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( ext4_fsblk_t, pblk )
+ __field( unsigned int, len )
+ __field( unsigned int, flags )
+ __field( int, ret )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = sb->s_dev;
+ __entry->lblk = map->m_lblk;
+ __entry->pblk = map->m_pblk;
+ __entry->len = map->m_len;
+ __entry->flags = map->m_flags;
+ __entry->ret = ret;
+ ),
+
+ TP_printk("dev %d,%d m_lblk %u m_pblk %llu m_len %u m_flags %u ret %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->lblk, (unsigned long long) __entry->pblk,
+ __entry->len, __entry->flags, __entry->ret)
+);
+
+TRACE_EVENT(ext4_ext_put_in_cache,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, unsigned int len,
+ ext4_fsblk_t start),
+
+ TP_ARGS(inode, lblk, len, start),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( unsigned int, len )
+ __field( ext4_fsblk_t, start )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->len = len;
+ __entry->start = start;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u len %u start %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ __entry->len,
+ (unsigned long long) __entry->start)
+);
+
+TRACE_EVENT(ext4_ext_in_cache,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, int ret),
+
+ TP_ARGS(inode, lblk, ret),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( int, ret )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->ret = ret;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u ret %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ __entry->ret)
+
+);
+
+TRACE_EVENT(ext4_find_delalloc_range,
+ TP_PROTO(struct inode *inode, ext4_lblk_t from, ext4_lblk_t to,
+ int reverse, int found, ext4_lblk_t found_blk),
+
+ TP_ARGS(inode, from, to, reverse, found, found_blk),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, from )
+ __field( ext4_lblk_t, to )
+ __field( int, reverse )
+ __field( int, found )
+ __field( ext4_lblk_t, found_blk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->from = from;
+ __entry->to = to;
+ __entry->reverse = reverse;
+ __entry->found = found;
+ __entry->found_blk = found_blk;
+ ),
+
+ TP_printk("dev %d,%d ino %lu from %u to %u reverse %d found %d "
+ "(blk = %u)",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->from, (unsigned) __entry->to,
+ __entry->reverse, __entry->found,
+ (unsigned) __entry->found_blk)
+);
+
+TRACE_EVENT(ext4_get_reserved_cluster_alloc,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, unsigned int len),
+
+ TP_ARGS(inode, lblk, len),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( unsigned int, len )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->len = len;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u len %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ __entry->len)
+);
+
+TRACE_EVENT(ext4_ext_show_extent,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, ext4_fsblk_t pblk,
+ unsigned short len),
+
+ TP_ARGS(inode, lblk, pblk, len),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( ext4_fsblk_t, pblk )
+ __field( unsigned short, len )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->pblk = pblk;
+ __entry->len = len;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u pblk %llu len %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ (unsigned long long) __entry->pblk,
+ (unsigned short) __entry->len)
+);
+
+TRACE_EVENT(ext4_remove_blocks,
+ TP_PROTO(struct inode *inode, struct ext4_extent *ex,
+ ext4_lblk_t from, ext4_fsblk_t to,
+ ext4_fsblk_t partial_cluster),
+
+ TP_ARGS(inode, ex, from, to, partial_cluster),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, ee_lblk )
+ __field( ext4_fsblk_t, ee_pblk )
+ __field( unsigned short, ee_len )
+ __field( ext4_lblk_t, from )
+ __field( ext4_lblk_t, to )
+ __field( ext4_fsblk_t, partial )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ee_lblk = cpu_to_le32(ex->ee_block);
+ __entry->ee_pblk = ext4_ext_pblock(ex);
+ __entry->ee_len = ext4_ext_get_actual_len(ex);
+ __entry->from = from;
+ __entry->to = to;
+ __entry->partial = partial_cluster;
+ ),
+
+ TP_printk("dev %d,%d ino %lu extent [%u(%llu), %u]"
+ "from %u to %u partial_cluster %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->ee_lblk,
+ (unsigned long long) __entry->ee_pblk,
+ (unsigned short) __entry->ee_len,
+ (unsigned) __entry->from,
+ (unsigned) __entry->to,
+ (unsigned) __entry->partial)
+);
+
+TRACE_EVENT(ext4_ext_rm_leaf,
+ TP_PROTO(struct inode *inode, ext4_lblk_t start,
+ struct ext4_extent *ex, ext4_fsblk_t partial_cluster),
+
+ TP_ARGS(inode, start, ex, partial_cluster),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, start )
+ __field( ext4_lblk_t, ee_lblk )
+ __field( ext4_fsblk_t, ee_pblk )
+ __field( short, ee_len )
+ __field( ext4_fsblk_t, partial )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->start = start;
+ __entry->ee_lblk = le32_to_cpu(ex->ee_block);
+ __entry->ee_pblk = ext4_ext_pblock(ex);
+ __entry->ee_len = ext4_ext_get_actual_len(ex);
+ __entry->partial = partial_cluster;
+ ),
+
+ TP_printk("dev %d,%d ino %lu start_lblk %u last_extent [%u(%llu), %u]"
+ "partial_cluster %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->start,
+ (unsigned) __entry->ee_lblk,
+ (unsigned long long) __entry->ee_pblk,
+ (unsigned short) __entry->ee_len,
+ (unsigned) __entry->partial)
+);
+
+TRACE_EVENT(ext4_ext_rm_idx,
+ TP_PROTO(struct inode *inode, ext4_fsblk_t pblk),
+
+ TP_ARGS(inode, pblk),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_fsblk_t, pblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->pblk = pblk;
+ ),
+
+ TP_printk("dev %d,%d ino %lu index_pblk %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned long long) __entry->pblk)
+);
+
+TRACE_EVENT(ext4_ext_remove_space,
+ TP_PROTO(struct inode *inode, ext4_lblk_t start, int depth),
+
+ TP_ARGS(inode, start, depth),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, start )
+ __field( int, depth )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->start = start;
+ __entry->depth = depth;
+ ),
+
+ TP_printk("dev %d,%d ino %lu since %u depth %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->start,
+ __entry->depth)
+);
+
+TRACE_EVENT(ext4_ext_remove_space_done,
+ TP_PROTO(struct inode *inode, ext4_lblk_t start, int depth,
+ ext4_lblk_t partial, unsigned short eh_entries),
+
+ TP_ARGS(inode, start, depth, partial, eh_entries),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, start )
+ __field( int, depth )
+ __field( ext4_lblk_t, partial )
+ __field( unsigned short, eh_entries )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->start = start;
+ __entry->depth = depth;
+ __entry->partial = partial;
+ __entry->eh_entries = eh_entries;
+ ),
+
+ TP_printk("dev %d,%d ino %lu since %u depth %d partial %u "
+ "remaining_entries %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->start,
+ __entry->depth,
+ (unsigned) __entry->partial,
+ (unsigned short) __entry->eh_entries)
+);
+
#endif /* _TRACE_EXT4_H */
/* This part must be outside protection */
diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
index 36851f7..edc4b3d 100644
--- a/include/trace/events/vmscan.h
+++ b/include/trace/events/vmscan.h
@@ -266,7 +266,7 @@
unsigned long nr_lumpy_taken,
unsigned long nr_lumpy_dirty,
unsigned long nr_lumpy_failed,
- int isolate_mode),
+ isolate_mode_t isolate_mode),
TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode),
@@ -278,7 +278,7 @@
__field(unsigned long, nr_lumpy_taken)
__field(unsigned long, nr_lumpy_dirty)
__field(unsigned long, nr_lumpy_failed)
- __field(int, isolate_mode)
+ __field(isolate_mode_t, isolate_mode)
),
TP_fast_assign(
@@ -312,7 +312,7 @@
unsigned long nr_lumpy_taken,
unsigned long nr_lumpy_dirty,
unsigned long nr_lumpy_failed,
- int isolate_mode),
+ isolate_mode_t isolate_mode),
TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode)
@@ -327,7 +327,7 @@
unsigned long nr_lumpy_taken,
unsigned long nr_lumpy_dirty,
unsigned long nr_lumpy_failed,
- int isolate_mode),
+ isolate_mode_t isolate_mode),
TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode)
diff --git a/include/video/omap-panel-dvi.h b/include/video/omap-panel-dvi.h
new file mode 100644
index 0000000..87ad567b
--- /dev/null
+++ b/include/video/omap-panel-dvi.h
@@ -0,0 +1,37 @@
+/*
+ * Header for DVI output driver
+ *
+ * Copyright (C) 2011 Texas Instruments Inc
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_PANEL_DVI_H
+#define __OMAP_PANEL_DVI_H
+
+struct omap_dss_device;
+
+/**
+ * struct panel_dvi_platform_data - panel driver configuration data
+ * @platform_enable: platform specific panel enable function
+ * @platform_disable: platform specific panel disable function
+ * @i2c_bus_num: i2c bus id for the panel
+ */
+struct panel_dvi_platform_data {
+ int (*platform_enable)(struct omap_dss_device *dssdev);
+ void (*platform_disable)(struct omap_dss_device *dssdev);
+ u16 i2c_bus_num;
+};
+
+#endif /* __OMAP_PANEL_DVI_H */
diff --git a/include/video/omap-panel-n8x0.h b/include/video/omap-panel-n8x0.h
new file mode 100644
index 0000000..50a1302
--- /dev/null
+++ b/include/video/omap-panel-n8x0.h
@@ -0,0 +1,15 @@
+#ifndef __OMAP_PANEL_N8X0_H
+#define __OMAP_PANEL_N8X0_H
+
+struct omap_dss_device;
+
+struct panel_n8x0_data {
+ int (*platform_enable)(struct omap_dss_device *dssdev);
+ void (*platform_disable)(struct omap_dss_device *dssdev);
+ int panel_reset;
+ int ctrl_pwrdown;
+
+ int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+};
+
+#endif
diff --git a/include/video/omap-panel-nokia-dsi.h b/include/video/omap-panel-nokia-dsi.h
index 921ae93..7dc71f9 100644
--- a/include/video/omap-panel-nokia-dsi.h
+++ b/include/video/omap-panel-nokia-dsi.h
@@ -10,9 +10,7 @@
* @ext_te_gpio: external TE GPIO
* @esd_interval: interval of ESD checks, 0 = disabled (ms)
* @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
- * @max_backlight_level: maximum backlight level
- * @set_backlight: pointer to backlight set function
- * @get_backlight: pointer to backlight get function
+ * @use_dsi_backlight: true if panel uses DSI command to control backlight
*/
struct nokia_dsi_panel_data {
const char *name;
@@ -25,9 +23,7 @@
unsigned esd_interval;
unsigned ulps_timeout;
- int max_backlight_level;
- int (*set_backlight)(struct omap_dss_device *dssdev, int level);
- int (*get_backlight)(struct omap_dss_device *dssdev);
+ bool use_dsi_backlight;
};
#endif /* __OMAP_NOKIA_DSI_PANEL_H */
diff --git a/include/video/omap-panel-picodlp.h b/include/video/omap-panel-picodlp.h
new file mode 100644
index 0000000..1c342ef
--- /dev/null
+++ b/include/video/omap-panel-picodlp.h
@@ -0,0 +1,23 @@
+/*
+ * panel data for picodlp panel
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * Author: Mayuresh Janorkar <mayur@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PANEL_PICODLP_H
+#define __PANEL_PICODLP_H
+/**
+ * struct : picodlp panel data
+ * picodlp_adapter_id: i2c_adapter number for picodlp
+ */
+struct picodlp_panel_data {
+ int picodlp_adapter_id;
+ int emu_done_gpio;
+ int pwrgood_gpio;
+};
+#endif /* __PANEL_PICODLP_H */
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3b55ef2..b66ebb2 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -41,8 +41,13 @@
#define DISPC_IRQ_WAKEUP (1 << 16)
#define DISPC_IRQ_SYNC_LOST2 (1 << 17)
#define DISPC_IRQ_VSYNC2 (1 << 18)
+#define DISPC_IRQ_VID3_END_WIN (1 << 19)
+#define DISPC_IRQ_VID3_FIFO_UNDERFLOW (1 << 20)
#define DISPC_IRQ_ACBIAS_COUNT_STAT2 (1 << 21)
#define DISPC_IRQ_FRAMEDONE2 (1 << 22)
+#define DISPC_IRQ_FRAMEDONEWB (1 << 23)
+#define DISPC_IRQ_FRAMEDONETV (1 << 24)
+#define DISPC_IRQ_WBBUFFEROVERFLOW (1 << 25)
struct omap_dss_device;
struct omap_overlay_manager;
@@ -60,7 +65,8 @@
enum omap_plane {
OMAP_DSS_GFX = 0,
OMAP_DSS_VIDEO1 = 1,
- OMAP_DSS_VIDEO2 = 2
+ OMAP_DSS_VIDEO2 = 2,
+ OMAP_DSS_VIDEO3 = 3,
};
enum omap_channel {
@@ -129,6 +135,18 @@
OMAP_DSS_VENC_TYPE_SVIDEO,
};
+enum omap_dss_dsi_pixel_format {
+ OMAP_DSS_DSI_FMT_RGB888,
+ OMAP_DSS_DSI_FMT_RGB666,
+ OMAP_DSS_DSI_FMT_RGB666_PACKED,
+ OMAP_DSS_DSI_FMT_RGB565,
+};
+
+enum omap_dss_dsi_mode {
+ OMAP_DSS_DSI_CMD_MODE = 0,
+ OMAP_DSS_DSI_VIDEO_MODE,
+};
+
enum omap_display_caps {
OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0,
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1,
@@ -162,11 +180,13 @@
enum omap_overlay_caps {
OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
- OMAP_DSS_OVL_CAP_DISPC = 1 << 1,
+ OMAP_DSS_OVL_CAP_GLOBAL_ALPHA = 1 << 1,
+ OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA = 1 << 2,
+ OMAP_DSS_OVL_CAP_ZORDER = 1 << 3,
};
enum omap_overlay_manager_caps {
- OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
+ OMAP_DSS_DUMMY_VALUE, /* add a dummy value to prevent compiler error */
};
enum omap_dss_clk_source {
@@ -215,26 +235,67 @@
void rfbi_bus_unlock(void);
/* DSI */
+
+struct omap_dss_dsi_videomode_data {
+ /* DSI video mode blanking data */
+ /* Unit: byte clock cycles */
+ u16 hsa;
+ u16 hfp;
+ u16 hbp;
+ /* Unit: line clocks */
+ u16 vsa;
+ u16 vfp;
+ u16 vbp;
+
+ /* DSI blanking modes */
+ int blanking_mode;
+ int hsa_blanking_mode;
+ int hbp_blanking_mode;
+ int hfp_blanking_mode;
+
+ /* Video port sync events */
+ int vp_de_pol;
+ int vp_hsync_pol;
+ int vp_vsync_pol;
+ bool vp_vsync_end;
+ bool vp_hsync_end;
+
+ bool ddr_clk_always_on;
+ int window_sync;
+};
+
void dsi_bus_lock(struct omap_dss_device *dssdev);
void dsi_bus_unlock(struct omap_dss_device *dssdev);
int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
int len);
-int dsi_vc_dcs_write_0(struct omap_dss_device *dssdev, int channel,
- u8 dcs_cmd);
+int dsi_vc_generic_write(struct omap_dss_device *dssdev, int channel, u8 *data,
+ int len);
+int dsi_vc_dcs_write_0(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd);
+int dsi_vc_generic_write_0(struct omap_dss_device *dssdev, int channel);
int dsi_vc_dcs_write_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 param);
+int dsi_vc_generic_write_1(struct omap_dss_device *dssdev, int channel,
+ u8 param);
+int dsi_vc_generic_write_2(struct omap_dss_device *dssdev, int channel,
+ u8 param1, u8 param2);
int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
u8 *data, int len);
+int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len);
int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 *buf, int buflen);
-int dsi_vc_dcs_read_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
- u8 *data);
-int dsi_vc_dcs_read_2(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
- u8 *data1, u8 *data2);
+int dsi_vc_generic_read_0(struct omap_dss_device *dssdev, int channel, u8 *buf,
+ int buflen);
+int dsi_vc_generic_read_1(struct omap_dss_device *dssdev, int channel, u8 param,
+ u8 *buf, int buflen);
+int dsi_vc_generic_read_2(struct omap_dss_device *dssdev, int channel,
+ u8 param1, u8 param2, u8 *buf, int buflen);
int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
u16 len);
int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel);
int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel);
+int dsi_video_mode_enable(struct omap_dss_device *dssdev, int channel);
+void dsi_video_mode_disable(struct omap_dss_device *dssdev, int channel);
/* Board specific data */
struct omap_dss_board_info {
@@ -242,7 +303,8 @@
int num_devices;
struct omap_dss_device **devices;
struct omap_dss_device *default_device;
- void (*dsi_mux_pads)(bool enable);
+ int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask);
+ void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
};
#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
@@ -300,7 +362,6 @@
bool enabled;
u32 paddr;
- void __iomem *vaddr;
u32 p_uv_addr; /* for NV12 format */
u16 screen_width;
u16 width;
@@ -316,6 +377,7 @@
u16 out_height; /* if 0, out_height == height */
u8 global_alpha;
u8 pre_mult_alpha;
+ u8 zorder;
};
struct omap_overlay {
@@ -324,7 +386,7 @@
/* static fields */
const char *name;
- int id;
+ enum omap_plane id;
enum omap_color_mode supported_modes;
enum omap_overlay_caps caps;
@@ -332,6 +394,7 @@
struct omap_overlay_manager *manager;
struct omap_overlay_info info;
+ bool manager_changed;
/* if true, info has been changed, but not applied() yet */
bool info_dirty;
@@ -354,7 +417,7 @@
u32 trans_key;
bool trans_enabled;
- bool alpha_enabled;
+ bool partial_alpha_enabled;
bool cpr_enable;
struct omap_dss_cpr_coefs cpr_coefs;
@@ -366,7 +429,7 @@
/* static fields */
const char *name;
- int id;
+ enum omap_channel id;
enum omap_overlay_manager_caps caps;
int num_overlays;
struct omap_overlay **overlays;
@@ -454,6 +517,7 @@
} dispc;
struct {
+ /* regn is one greater than TRM's REGN value */
u16 regn;
u16 regm;
u16 regm_dispc;
@@ -464,6 +528,7 @@
} dsi;
struct {
+ /* regn is one greater than TRM's REGN value */
u16 regn;
u16 regm2;
} hdmi;
@@ -477,6 +542,10 @@
int acb; /* ac-bias pin frequency */
enum omap_panel_config config;
+
+ enum omap_dss_dsi_pixel_format dsi_pix_fmt;
+ enum omap_dss_dsi_mode dsi_mode;
+ struct omap_dss_dsi_videomode_data dsi_vm_data;
} panel;
struct {
@@ -557,6 +626,9 @@
int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
u32 (*get_wss)(struct omap_dss_device *dssdev);
+
+ int (*read_edid)(struct omap_dss_device *dssdev, u8 *buf, int len);
+ bool (*detect)(struct omap_dss_device *dssdev);
};
int omap_dss_register_driver(struct omap_dss_driver *);
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index d964e68..8101b72 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -4,26 +4,123 @@
#include <linux/fb.h>
#include <video/sh_mobile_meram.h>
+/* Register definitions */
+#define _LDDCKR 0x410
+#define LDDCKR_ICKSEL_BUS (0 << 16)
+#define LDDCKR_ICKSEL_MIPI (1 << 16)
+#define LDDCKR_ICKSEL_HDMI (2 << 16)
+#define LDDCKR_ICKSEL_EXT (3 << 16)
+#define LDDCKR_ICKSEL_MASK (7 << 16)
+#define LDDCKR_MOSEL (1 << 6)
+#define _LDDCKSTPR 0x414
+#define _LDINTR 0x468
+#define LDINTR_FE (1 << 10)
+#define LDINTR_VSE (1 << 9)
+#define LDINTR_VEE (1 << 8)
+#define LDINTR_FS (1 << 2)
+#define LDINTR_VSS (1 << 1)
+#define LDINTR_VES (1 << 0)
+#define LDINTR_STATUS_MASK (0xff << 0)
+#define _LDSR 0x46c
+#define LDSR_MSS (1 << 10)
+#define LDSR_MRS (1 << 8)
+#define LDSR_AS (1 << 1)
+#define _LDCNT1R 0x470
+#define LDCNT1R_DE (1 << 0)
+#define _LDCNT2R 0x474
+#define LDCNT2R_BR (1 << 8)
+#define LDCNT2R_MD (1 << 3)
+#define LDCNT2R_SE (1 << 2)
+#define LDCNT2R_ME (1 << 1)
+#define LDCNT2R_DO (1 << 0)
+#define _LDRCNTR 0x478
+#define LDRCNTR_SRS (1 << 17)
+#define LDRCNTR_SRC (1 << 16)
+#define LDRCNTR_MRS (1 << 1)
+#define LDRCNTR_MRC (1 << 0)
+#define _LDDDSR 0x47c
+#define LDDDSR_LS (1 << 2)
+#define LDDDSR_WS (1 << 1)
+#define LDDDSR_BS (1 << 0)
+
+#define LDMT1R_VPOL (1 << 28)
+#define LDMT1R_HPOL (1 << 27)
+#define LDMT1R_DWPOL (1 << 26)
+#define LDMT1R_DIPOL (1 << 25)
+#define LDMT1R_DAPOL (1 << 24)
+#define LDMT1R_HSCNT (1 << 17)
+#define LDMT1R_DWCNT (1 << 16)
+#define LDMT1R_IFM (1 << 12)
+#define LDMT1R_MIFTYP_RGB8 (0x0 << 0)
+#define LDMT1R_MIFTYP_RGB9 (0x4 << 0)
+#define LDMT1R_MIFTYP_RGB12A (0x5 << 0)
+#define LDMT1R_MIFTYP_RGB12B (0x6 << 0)
+#define LDMT1R_MIFTYP_RGB16 (0x7 << 0)
+#define LDMT1R_MIFTYP_RGB18 (0xa << 0)
+#define LDMT1R_MIFTYP_RGB24 (0xb << 0)
+#define LDMT1R_MIFTYP_YCBCR (0xf << 0)
+#define LDMT1R_MIFTYP_SYS8A (0x0 << 0)
+#define LDMT1R_MIFTYP_SYS8B (0x1 << 0)
+#define LDMT1R_MIFTYP_SYS8C (0x2 << 0)
+#define LDMT1R_MIFTYP_SYS8D (0x3 << 0)
+#define LDMT1R_MIFTYP_SYS9 (0x4 << 0)
+#define LDMT1R_MIFTYP_SYS12 (0x5 << 0)
+#define LDMT1R_MIFTYP_SYS16A (0x7 << 0)
+#define LDMT1R_MIFTYP_SYS16B (0x8 << 0)
+#define LDMT1R_MIFTYP_SYS16C (0x9 << 0)
+#define LDMT1R_MIFTYP_SYS18 (0xa << 0)
+#define LDMT1R_MIFTYP_SYS24 (0xb << 0)
+#define LDMT1R_MIFTYP_MASK (0xf << 0)
+
+#define LDDFR_CF1 (1 << 18)
+#define LDDFR_CF0 (1 << 17)
+#define LDDFR_CC (1 << 16)
+#define LDDFR_YF_420 (0 << 8)
+#define LDDFR_YF_422 (1 << 8)
+#define LDDFR_YF_444 (2 << 8)
+#define LDDFR_YF_MASK (3 << 8)
+#define LDDFR_PKF_ARGB32 (0x00 << 0)
+#define LDDFR_PKF_RGB16 (0x03 << 0)
+#define LDDFR_PKF_RGB24 (0x0b << 0)
+#define LDDFR_PKF_MASK (0x1f << 0)
+
+#define LDSM1R_OS (1 << 0)
+
+#define LDSM2R_OSTRG (1 << 0)
+
+#define LDPMR_LPS (3 << 0)
+
+#define _LDDWD0R 0x800
+#define LDDWDxR_WDACT (1 << 28)
+#define LDDWDxR_RSW (1 << 24)
+#define _LDDRDR 0x840
+#define LDDRDR_RSR (1 << 24)
+#define LDDRDR_DRD_MASK (0x3ffff << 0)
+#define _LDDWAR 0x900
+#define LDDWAR_WA (1 << 0)
+#define _LDDRAR 0x904
+#define LDDRAR_RA (1 << 0)
+
enum {
- RGB8, /* 24bpp, 8:8:8 */
- RGB9, /* 18bpp, 9:9 */
- RGB12A, /* 24bpp, 12:12 */
- RGB12B, /* 12bpp */
- RGB16, /* 16bpp */
- RGB18, /* 18bpp */
- RGB24, /* 24bpp */
- YUV422, /* 16bpp */
- SYS8A, /* 24bpp, 8:8:8 */
- SYS8B, /* 18bpp, 8:8:2 */
- SYS8C, /* 18bpp, 2:8:8 */
- SYS8D, /* 16bpp, 8:8 */
- SYS9, /* 18bpp, 9:9 */
- SYS12, /* 24bpp, 12:12 */
- SYS16A, /* 16bpp */
- SYS16B, /* 18bpp, 16:2 */
- SYS16C, /* 18bpp, 2:16 */
- SYS18, /* 18bpp */
- SYS24, /* 24bpp */
+ RGB8 = LDMT1R_MIFTYP_RGB8, /* 24bpp, 8:8:8 */
+ RGB9 = LDMT1R_MIFTYP_RGB9, /* 18bpp, 9:9 */
+ RGB12A = LDMT1R_MIFTYP_RGB12A, /* 24bpp, 12:12 */
+ RGB12B = LDMT1R_MIFTYP_RGB12B, /* 12bpp */
+ RGB16 = LDMT1R_MIFTYP_RGB16, /* 16bpp */
+ RGB18 = LDMT1R_MIFTYP_RGB18, /* 18bpp */
+ RGB24 = LDMT1R_MIFTYP_RGB24, /* 24bpp */
+ YUV422 = LDMT1R_MIFTYP_YCBCR, /* 16bpp */
+ SYS8A = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8A, /* 24bpp, 8:8:8 */
+ SYS8B = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8B, /* 18bpp, 8:8:2 */
+ SYS8C = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8C, /* 18bpp, 2:8:8 */
+ SYS8D = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8D, /* 16bpp, 8:8 */
+ SYS9 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS9, /* 18bpp, 9:9 */
+ SYS12 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS12, /* 24bpp, 12:12 */
+ SYS16A = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16A, /* 16bpp */
+ SYS16B = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16B, /* 18bpp, 16:2 */
+ SYS16C = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16C, /* 18bpp, 2:16 */
+ SYS18 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS18, /* 18bpp */
+ SYS24 = LDMT1R_IFM | LDMT1R_MIFTYP_SYS24, /* 24bpp */
};
enum { LCDC_CHAN_DISABLED = 0,
diff --git a/include/video/udlfb.h b/include/video/udlfb.h
index 69d485a..c41f308 100644
--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -50,6 +50,7 @@
int base16;
int base8;
u32 pseudo_palette[256];
+ int blank_mode; /*one of FB_BLANK_ */
/* blit-only rendering path metrics, exposed through sysfs */
atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */
atomic_t bytes_identical; /* saved effort with backbuffer comparison */
diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h
index 901724d..b62dfef 100644
--- a/include/xen/hvc-console.h
+++ b/include/xen/hvc-console.h
@@ -6,12 +6,12 @@
#ifdef CONFIG_HVC_XEN
void xen_console_resume(void);
void xen_raw_console_write(const char *str);
-__attribute__((format(printf, 1, 2)))
+__printf(1, 2)
void xen_raw_printk(const char *fmt, ...);
#else
static inline void xen_console_resume(void) { }
static inline void xen_raw_console_write(const char *str) { }
-static inline __attribute__((format(printf, 1, 2)))
+static inline __printf(1, 2)
void xen_raw_printk(const char *fmt, ...) { }
#endif
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
index aceeca7..b9f9fb5a 100644
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -156,9 +156,9 @@
__attribute__((format(scanf, 4, 5)));
/* Single printf and write: returns -errno or 0. */
+__printf(4, 5)
int xenbus_printf(struct xenbus_transaction t,
- const char *dir, const char *node, const char *fmt, ...)
- __attribute__((format(printf, 4, 5)));
+ const char *dir, const char *node, const char *fmt, ...);
/* Generic read function: NULL-terminated triples of name,
* sprintf-style type string, and pointer. Returns 0 or errno.*/
@@ -200,11 +200,11 @@
struct xenbus_watch *watch,
void (*callback)(struct xenbus_watch *,
const char **, unsigned int));
+__printf(4, 5)
int xenbus_watch_pathfmt(struct xenbus_device *dev, struct xenbus_watch *watch,
void (*callback)(struct xenbus_watch *,
const char **, unsigned int),
- const char *pathfmt, ...)
- __attribute__ ((format (printf, 4, 5)));
+ const char *pathfmt, ...);
int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state new_state);
int xenbus_grant_ring(struct xenbus_device *dev, unsigned long ring_mfn);
@@ -223,9 +223,9 @@
enum xenbus_state xenbus_read_driver_state(const char *path);
-__attribute__((format(printf, 3, 4)))
+__printf(3, 4)
void xenbus_dev_error(struct xenbus_device *dev, int err, const char *fmt, ...);
-__attribute__((format(printf, 3, 4)))
+__printf(3, 4)
void xenbus_dev_fatal(struct xenbus_device *dev, int err, const char *fmt, ...);
const char *xenbus_strstate(enum xenbus_state state);
diff --git a/init/Kconfig b/init/Kconfig
index 31ba0fd..43298f9 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -947,7 +947,7 @@
config SYSCTL_SYSCALL
bool "Sysctl syscall support" if EXPERT
depends on PROC_SYSCTL
- default y
+ default n
select SYSCTL
---help---
sys_sysctl uses binary paths that have been found challenging
@@ -959,7 +959,7 @@
trying to save some space it is probably safe to disable this,
making your kernel marginally smaller.
- If unsure say Y here.
+ If unsure say N here.
config KALLSYMS
bool "Load all symbols for debugging/ksymoops" if EXPERT
diff --git a/init/do_mounts.c b/init/do_mounts.c
index c0851a8..0f6e1d9 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -28,7 +28,7 @@
int root_mountflags = MS_RDONLY | MS_SILENT;
static char * __initdata root_device_name;
static char __initdata saved_root_name[64];
-static int __initdata root_wait;
+static int root_wait;
dev_t ROOT_DEV;
@@ -85,12 +85,15 @@
/**
* devt_from_partuuid - looks up the dev_t of a partition by its UUID
- * @uuid: 36 byte char array containing a hex ascii UUID
+ * @uuid: min 36 byte char array containing a hex ascii UUID
*
* The function will return the first partition which contains a matching
* UUID value in its partition_meta_info struct. This does not search
* by filesystem UUIDs.
*
+ * If @uuid is followed by a "/PARTNROFF=%d", then the number will be
+ * extracted and used as an offset from the partition identified by the UUID.
+ *
* Returns the matching dev_t on success or 0 on failure.
*/
static dev_t devt_from_partuuid(char *uuid_str)
@@ -98,6 +101,28 @@
dev_t res = 0;
struct device *dev = NULL;
u8 uuid[16];
+ struct gendisk *disk;
+ struct hd_struct *part;
+ int offset = 0;
+
+ if (strlen(uuid_str) < 36)
+ goto done;
+
+ /* Check for optional partition number offset attributes. */
+ if (uuid_str[36]) {
+ char c = 0;
+ /* Explicitly fail on poor PARTUUID syntax. */
+ if (sscanf(&uuid_str[36],
+ "/PARTNROFF=%d%c", &offset, &c) != 1) {
+ printk(KERN_ERR "VFS: PARTUUID= is invalid.\n"
+ "Expected PARTUUID=<valid-uuid-id>[/PARTNROFF=%%d]\n");
+ if (root_wait)
+ printk(KERN_ERR
+ "Disabling rootwait; root= is invalid.\n");
+ root_wait = 0;
+ goto done;
+ }
+ }
/* Pack the requested UUID in the expected format. */
part_pack_uuid(uuid_str, uuid);
@@ -107,8 +132,21 @@
goto done;
res = dev->devt;
- put_device(dev);
+ /* Attempt to find the partition by offset. */
+ if (!offset)
+ goto no_offset;
+
+ res = 0;
+ disk = part_to_disk(dev_to_part(dev));
+ part = disk_get_part(disk, dev_to_part(dev)->partno + offset);
+ if (part) {
+ res = part_devt(part);
+ put_device(part_to_dev(part));
+ }
+
+no_offset:
+ put_device(dev);
done:
return res;
}
@@ -126,6 +164,8 @@
* used when disk name of partitioned disk ends on a digit.
* 6) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
* unique id of a partition if the partition table provides it.
+ * 7) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to
+ * a partition with a known unique id.
*
* If name doesn't have fall into the categories above, we return (0,0).
* block_class is used to check if something is a disk name. If the disk
@@ -143,8 +183,6 @@
#ifdef CONFIG_BLOCK
if (strncmp(name, "PARTUUID=", 9) == 0) {
name += 9;
- if (strlen(name) != 36)
- goto fail;
res = devt_from_partuuid(name);
if (!res)
goto fail;
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index fe9acb0..887629e 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -120,6 +120,20 @@
}
/*
+ * Read 512 bytes further to check if cramfs is padded
+ */
+ sys_lseek(fd, start_block * BLOCK_SIZE + 0x200, 0);
+ sys_read(fd, buf, size);
+
+ if (cramfsb->magic == CRAMFS_MAGIC) {
+ printk(KERN_NOTICE
+ "RAMDISK: cramfs filesystem found at block %d\n",
+ start_block);
+ nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS;
+ goto done;
+ }
+
+ /*
* Read block 1 to test for minix and ext2 superblock
*/
sys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index ed049ea..2e0ecfc 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -449,8 +449,8 @@
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock(&info->lock);
- time = schedule_hrtimeout_range_clock(timeout,
- HRTIMER_MODE_ABS, 0, CLOCK_REALTIME);
+ time = schedule_hrtimeout_range_clock(timeout, 0,
+ HRTIMER_MODE_ABS, CLOCK_REALTIME);
while (ewp->state == STATE_PENDING)
cpu_relax();
diff --git a/ipc/sem.c b/ipc/sem.c
index c8e00f8..5215a81 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -90,6 +90,52 @@
#include <asm/uaccess.h>
#include "util.h"
+/* One semaphore structure for each semaphore in the system. */
+struct sem {
+ int semval; /* current value */
+ int sempid; /* pid of last operation */
+ struct list_head sem_pending; /* pending single-sop operations */
+};
+
+/* One queue for each sleeping process in the system. */
+struct sem_queue {
+ struct list_head simple_list; /* queue of pending operations */
+ struct list_head list; /* queue of pending operations */
+ struct task_struct *sleeper; /* this process */
+ struct sem_undo *undo; /* undo structure */
+ int pid; /* process id of requesting process */
+ int status; /* completion status of operation */
+ struct sembuf *sops; /* array of pending operations */
+ int nsops; /* number of operations */
+ int alter; /* does *sops alter the array? */
+};
+
+/* Each task has a list of undo requests. They are executed automatically
+ * when the process exits.
+ */
+struct sem_undo {
+ struct list_head list_proc; /* per-process list: *
+ * all undos from one process
+ * rcu protected */
+ struct rcu_head rcu; /* rcu struct for sem_undo */
+ struct sem_undo_list *ulp; /* back ptr to sem_undo_list */
+ struct list_head list_id; /* per semaphore array list:
+ * all undos for one array */
+ int semid; /* semaphore set identifier */
+ short *semadj; /* array of adjustments */
+ /* one per semaphore */
+};
+
+/* sem_undo_list controls shared access to the list of sem_undo structures
+ * that may be shared among all a CLONE_SYSVSEM task group.
+ */
+struct sem_undo_list {
+ atomic_t refcnt;
+ spinlock_t lock;
+ struct list_head list_proc;
+};
+
+
#define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS])
#define sem_unlock(sma) ipc_unlock(&(sma)->sem_perm)
@@ -1426,6 +1472,8 @@
queue.status = -EINTR;
queue.sleeper = current;
+
+sleep_again:
current->state = TASK_INTERRUPTIBLE;
sem_unlock(sma);
@@ -1460,7 +1508,6 @@
* Array removed? If yes, leave without sem_unlock().
*/
if (IS_ERR(sma)) {
- error = -EIDRM;
goto out_free;
}
@@ -1479,6 +1526,13 @@
*/
if (timeout && jiffies_left == 0)
error = -EAGAIN;
+
+ /*
+ * If the wakeup was spurious, just retry
+ */
+ if (error == -EINTR && !signal_pending(current))
+ goto sleep_again;
+
unlink_queue(sma, &queue);
out_unlock_free:
diff --git a/kernel/Makefile b/kernel/Makefile
index 2da48d3..e898c5b 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -101,6 +101,7 @@
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
+obj-$(CONFIG_CPU_PM) += cpu_pm.o
obj-$(CONFIG_PERF_EVENTS) += events/
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 453100a..d9d5648 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2027,7 +2027,7 @@
goto out_free_group_list;
/* prevent changes to the threadgroup list while we take a snapshot. */
- rcu_read_lock();
+ read_lock(&tasklist_lock);
if (!thread_group_leader(leader)) {
/*
* a race with de_thread from another thread's exec() may strip
@@ -2036,7 +2036,7 @@
* throw this task away and try again (from cgroup_procs_write);
* this is "double-double-toil-and-trouble-check locking".
*/
- rcu_read_unlock();
+ read_unlock(&tasklist_lock);
retval = -EAGAIN;
goto out_free_group_list;
}
@@ -2057,7 +2057,7 @@
} while_each_thread(leader, tsk);
/* remember the number of threads in the array for later. */
group_size = i;
- rcu_read_unlock();
+ read_unlock(&tasklist_lock);
/*
* step 1: check that we can legitimately attach to the cgroup.
@@ -2135,14 +2135,17 @@
oldcgrp = task_cgroup_from_root(tsk, root);
if (cgrp == oldcgrp)
continue;
- /* attach each task to each subsystem */
- for_each_subsys(root, ss) {
- if (ss->attach_task)
- ss->attach_task(cgrp, tsk);
- }
/* if the thread is PF_EXITING, it can just get skipped. */
retval = cgroup_task_migrate(cgrp, oldcgrp, tsk, true);
- BUG_ON(retval != 0 && retval != -ESRCH);
+ if (retval == 0) {
+ /* attach each task to each subsystem */
+ for_each_subsys(root, ss) {
+ if (ss->attach_task)
+ ss->attach_task(cgrp, tsk);
+ }
+ } else {
+ BUG_ON(retval != -ESRCH);
+ }
}
/* nothing is sensitive to fork() after this point. */
@@ -4880,9 +4883,9 @@
rcu_assign_pointer(id->css, NULL);
rcu_assign_pointer(css->id, NULL);
- spin_lock(&ss->id_lock);
+ write_lock(&ss->id_lock);
idr_remove(&ss->idr, id->id);
- spin_unlock(&ss->id_lock);
+ write_unlock(&ss->id_lock);
kfree_rcu(id, rcu_head);
}
EXPORT_SYMBOL_GPL(free_css_id);
@@ -4908,10 +4911,10 @@
error = -ENOMEM;
goto err_out;
}
- spin_lock(&ss->id_lock);
+ write_lock(&ss->id_lock);
/* Don't use 0. allocates an ID of 1-65535 */
error = idr_get_new_above(&ss->idr, newid, 1, &myid);
- spin_unlock(&ss->id_lock);
+ write_unlock(&ss->id_lock);
/* Returns error when there are no free spaces for new ID.*/
if (error) {
@@ -4926,9 +4929,9 @@
return newid;
remove_idr:
error = -ENOSPC;
- spin_lock(&ss->id_lock);
+ write_lock(&ss->id_lock);
idr_remove(&ss->idr, myid);
- spin_unlock(&ss->id_lock);
+ write_unlock(&ss->id_lock);
err_out:
kfree(newid);
return ERR_PTR(error);
@@ -4940,7 +4943,7 @@
{
struct css_id *newid;
- spin_lock_init(&ss->id_lock);
+ rwlock_init(&ss->id_lock);
idr_init(&ss->idr);
newid = get_new_cssid(ss, 0);
@@ -5035,9 +5038,9 @@
* scan next entry from bitmap(tree), tmpid is updated after
* idr_get_next().
*/
- spin_lock(&ss->id_lock);
+ read_lock(&ss->id_lock);
tmp = idr_get_next(&ss->idr, &tmpid);
- spin_unlock(&ss->id_lock);
+ read_unlock(&ss->id_lock);
if (!tmp)
break;
diff --git a/kernel/cpu_pm.c b/kernel/cpu_pm.c
new file mode 100644
index 0000000..249152e
--- /dev/null
+++ b/kernel/cpu_pm.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpu_pm.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+
+static DEFINE_RWLOCK(cpu_pm_notifier_lock);
+static RAW_NOTIFIER_HEAD(cpu_pm_notifier_chain);
+
+static int cpu_pm_notify(enum cpu_pm_event event, int nr_to_call, int *nr_calls)
+{
+ int ret;
+
+ ret = __raw_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL,
+ nr_to_call, nr_calls);
+
+ return notifier_to_errno(ret);
+}
+
+/**
+ * cpu_pm_register_notifier - register a driver with cpu_pm
+ * @nb: notifier block to register
+ *
+ * Add a driver to a list of drivers that are notified about
+ * CPU and CPU cluster low power entry and exit.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_register.
+ */
+int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_register(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_register_notifier);
+
+/**
+ * cpu_pm_unregister_notifier - unregister a driver with cpu_pm
+ * @nb: notifier block to be unregistered
+ *
+ * Remove a driver from the CPU PM notifier list.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_unregister.
+ */
+int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_unregister(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_unregister_notifier);
+
+/**
+ * cpm_pm_enter - CPU low power entry notifier
+ *
+ * Notifies listeners that a single CPU is entering a low power state that may
+ * cause some blocks in the same power domain as the cpu to reset.
+ *
+ * Must be called on the affected CPU with interrupts disabled. Platform is
+ * responsible for ensuring that cpu_pm_enter is not called twice on the same
+ * CPU before cpu_pm_exit is called. Notified drivers can include VFP
+ * co-processor, interrupt controller and it's PM extensions, local CPU
+ * timers context save/restore which shouldn't be interrupted. Hence it
+ * must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU PM
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_enter);
+
+/**
+ * cpm_pm_exit - CPU low power exit notifier
+ *
+ * Notifies listeners that a single CPU is exiting a low power state that may
+ * have caused some blocks in the same power domain as the cpu to reset.
+ *
+ * Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_exit);
+
+/**
+ * cpm_cluster_pm_enter - CPU cluster low power entry notifier
+ *
+ * Notifies listeners that all cpus in a power domain are entering a low power
+ * state that may cause some blocks in the same power domain to reset.
+ *
+ * Must be called after cpu_pm_enter has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU cluster
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_CLUSTER_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_enter);
+
+/**
+ * cpm_cluster_pm_exit - CPU cluster low power exit notifier
+ *
+ * Notifies listeners that all cpus in a power domain are exiting form a
+ * low power state that may have caused some blocks in the same power domain
+ * to reset.
+ *
+ * Must be called after cpu_pm_exit has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_exit);
+
+#ifdef CONFIG_PM
+static int cpu_pm_suspend(void)
+{
+ int ret;
+
+ ret = cpu_pm_enter();
+ if (ret)
+ return ret;
+
+ ret = cpu_cluster_pm_enter();
+ return ret;
+}
+
+static void cpu_pm_resume(void)
+{
+ cpu_cluster_pm_exit();
+ cpu_pm_exit();
+}
+
+static struct syscore_ops cpu_pm_syscore_ops = {
+ .suspend = cpu_pm_suspend,
+ .resume = cpu_pm_resume,
+};
+
+static int cpu_pm_init(void)
+{
+ register_syscore_ops(&cpu_pm_syscore_ops);
+ return 0;
+}
+core_initcall(cpu_pm_init);
+#endif
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 10131fd..ed0ff44 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -949,6 +949,8 @@
static void cpuset_change_task_nodemask(struct task_struct *tsk,
nodemask_t *newmems)
{
+ bool masks_disjoint = !nodes_intersects(*newmems, tsk->mems_allowed);
+
repeat:
/*
* Allow tasks that have access to memory reserves because they have
@@ -963,7 +965,6 @@
nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1);
-
/*
* ensure checking ->mems_allowed_change_disable after setting all new
* allowed nodes.
@@ -980,9 +981,11 @@
/*
* Allocation of memory is very fast, we needn't sleep when waiting
- * for the read-side.
+ * for the read-side. No wait is necessary, however, if at least one
+ * node remains unchanged.
*/
- while (ACCESS_ONCE(tsk->mems_allowed_change_disable)) {
+ while (masks_disjoint &&
+ ACCESS_ONCE(tsk->mems_allowed_change_disable)) {
task_unlock(tsk);
if (!task_curr(tsk))
yield();
diff --git a/kernel/crash_dump.c b/kernel/crash_dump.c
index 5f85690..69ebf33 100644
--- a/kernel/crash_dump.c
+++ b/kernel/crash_dump.c
@@ -20,8 +20,15 @@
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
/*
+ * stores the size of elf header of crash image
+ */
+unsigned long long elfcorehdr_size;
+
+/*
* elfcorehdr= specifies the location of elf core header stored by the crashed
* kernel. This option will be passed by kexec loader to the capture kernel.
+ *
+ * Syntax: elfcorehdr=[size[KMG]@]offset[KMG]
*/
static int __init setup_elfcorehdr(char *arg)
{
@@ -29,6 +36,10 @@
if (!arg)
return -EINVAL;
elfcorehdr_addr = memparse(arg, &end);
+ if (*end == '@') {
+ elfcorehdr_size = elfcorehdr_addr;
+ elfcorehdr_addr = memparse(end + 1, &end);
+ }
return end > arg ? 0 : -EINVAL;
}
early_param("elfcorehdr", setup_elfcorehdr);
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 3487248..c22d8c2 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -217,7 +217,7 @@
/* Pack in hex chars */
for (i = 0; i < wcount; i++)
- bufptr = pack_hex_byte(bufptr, s[i]);
+ bufptr = hex_byte_pack(bufptr, s[i]);
*bufptr = '\0';
/* Move up */
@@ -249,7 +249,7 @@
if (err)
return NULL;
while (count > 0) {
- buf = pack_hex_byte(buf, *tmp);
+ buf = hex_byte_pack(buf, *tmp);
tmp++;
count--;
}
@@ -411,14 +411,14 @@
limit = id + (BUF_THREAD_ID_SIZE / 2);
while (id < limit) {
if (!lzero || *id != 0) {
- pkt = pack_hex_byte(pkt, *id);
+ pkt = hex_byte_pack(pkt, *id);
lzero = 0;
}
id++;
}
if (lzero)
- pkt = pack_hex_byte(pkt, 0);
+ pkt = hex_byte_pack(pkt, 0);
return pkt;
}
@@ -486,7 +486,7 @@
dbg_remove_all_break();
remcom_out_buffer[0] = 'S';
- pack_hex_byte(&remcom_out_buffer[1], ks->signo);
+ hex_byte_pack(&remcom_out_buffer[1], ks->signo);
}
static void gdb_get_regs_helper(struct kgdb_state *ks)
@@ -954,7 +954,7 @@
/* Reply to host that an exception has occurred */
ptr = remcom_out_buffer;
*ptr++ = 'T';
- ptr = pack_hex_byte(ptr, ks->signo);
+ ptr = hex_byte_pack(ptr, ks->signo);
ptr += strlen(strcpy(ptr, "thread:"));
int_to_threadref(thref, shadow_pid(current->pid));
ptr = pack_threadid(ptr, thref);
diff --git a/kernel/events/core.c b/kernel/events/core.c
index d1a1bee..e1253fa 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -29,7 +29,6 @@
#include <linux/hardirq.h>
#include <linux/rculist.h>
#include <linux/uaccess.h>
-#include <linux/suspend.h>
#include <linux/syscalls.h>
#include <linux/anon_inodes.h>
#include <linux/kernel_stat.h>
@@ -3544,7 +3543,7 @@
struct ring_buffer *rb = event->rb;
atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
- vma->vm_mm->locked_vm -= event->mmap_locked;
+ vma->vm_mm->pinned_vm -= event->mmap_locked;
rcu_assign_pointer(event->rb, NULL);
mutex_unlock(&event->mmap_mutex);
@@ -3625,7 +3624,7 @@
lock_limit = rlimit(RLIMIT_MEMLOCK);
lock_limit >>= PAGE_SHIFT;
- locked = vma->vm_mm->locked_vm + extra;
+ locked = vma->vm_mm->pinned_vm + extra;
if ((locked > lock_limit) && perf_paranoid_tracepoint_raw() &&
!capable(CAP_IPC_LOCK)) {
@@ -3651,7 +3650,7 @@
atomic_long_add(user_extra, &user->locked_vm);
event->mmap_locked = extra;
event->mmap_user = get_current_user();
- vma->vm_mm->locked_vm += event->mmap_locked;
+ vma->vm_mm->pinned_vm += event->mmap_locked;
unlock:
if (!ret)
@@ -6853,7 +6852,7 @@
struct swevent_htable *swhash = &per_cpu(swevent_htable, cpu);
mutex_lock(&swhash->hlist_mutex);
- if (swhash->hlist_refcount > 0 && !swhash->swevent_hlist) {
+ if (swhash->hlist_refcount > 0) {
struct swevent_hlist *hlist;
hlist = kzalloc_node(sizeof(*hlist), GFP_KERNEL, cpu_to_node(cpu));
@@ -6942,14 +6941,7 @@
{
unsigned int cpu = (long)hcpu;
- /*
- * Ignore suspend/resume action, the perf_pm_notifier will
- * take care of that.
- */
- if (action & CPU_TASKS_FROZEN)
- return NOTIFY_OK;
-
- switch (action) {
+ switch (action & ~CPU_TASKS_FROZEN) {
case CPU_UP_PREPARE:
case CPU_DOWN_FAILED:
@@ -6968,90 +6960,6 @@
return NOTIFY_OK;
}
-static void perf_pm_resume_cpu(void *unused)
-{
- struct perf_cpu_context *cpuctx;
- struct perf_event_context *ctx;
- struct pmu *pmu;
- int idx;
-
- idx = srcu_read_lock(&pmus_srcu);
- list_for_each_entry_rcu(pmu, &pmus, entry) {
- cpuctx = this_cpu_ptr(pmu->pmu_cpu_context);
- ctx = cpuctx->task_ctx;
-
- perf_ctx_lock(cpuctx, ctx);
- perf_pmu_disable(cpuctx->ctx.pmu);
-
- cpu_ctx_sched_out(cpuctx, EVENT_ALL);
- if (ctx)
- ctx_sched_out(ctx, cpuctx, EVENT_ALL);
-
- perf_pmu_enable(cpuctx->ctx.pmu);
- perf_ctx_unlock(cpuctx, ctx);
- }
- srcu_read_unlock(&pmus_srcu, idx);
-}
-
-static void perf_pm_suspend_cpu(void *unused)
-{
- struct perf_cpu_context *cpuctx;
- struct perf_event_context *ctx;
- struct pmu *pmu;
- int idx;
-
- idx = srcu_read_lock(&pmus_srcu);
- list_for_each_entry_rcu(pmu, &pmus, entry) {
- cpuctx = this_cpu_ptr(pmu->pmu_cpu_context);
- ctx = cpuctx->task_ctx;
-
- perf_ctx_lock(cpuctx, ctx);
- perf_pmu_disable(cpuctx->ctx.pmu);
-
- perf_event_sched_in(cpuctx, ctx, current);
-
- perf_pmu_enable(cpuctx->ctx.pmu);
- perf_ctx_unlock(cpuctx, ctx);
- }
- srcu_read_unlock(&pmus_srcu, idx);
-}
-
-static int perf_resume(void)
-{
- get_online_cpus();
- smp_call_function(perf_pm_resume_cpu, NULL, 1);
- put_online_cpus();
-
- return NOTIFY_OK;
-}
-
-static int perf_suspend(void)
-{
- get_online_cpus();
- smp_call_function(perf_pm_suspend_cpu, NULL, 1);
- put_online_cpus();
-
- return NOTIFY_OK;
-}
-
-static int perf_pm(struct notifier_block *self, unsigned long action, void *ptr)
-{
- switch (action) {
- case PM_POST_HIBERNATION:
- case PM_POST_SUSPEND:
- return perf_resume();
- case PM_HIBERNATION_PREPARE:
- case PM_SUSPEND_PREPARE:
- return perf_suspend();
- default:
- return NOTIFY_DONE;
- }
-}
-
-static struct notifier_block perf_pm_notifier = {
- .notifier_call = perf_pm,
-};
-
void __init perf_event_init(void)
{
int ret;
@@ -7066,7 +6974,6 @@
perf_tp_register();
perf_cpu_notifier(perf_cpu_notify);
register_reboot_notifier(&perf_reboot_notifier);
- register_pm_notifier(&perf_pm_notifier);
ret = init_hw_breakpoint();
WARN(ret, "hw_breakpoint initialization failed with: %d", ret);
diff --git a/kernel/exit.c b/kernel/exit.c
index 2913b35..d0b7d98 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -681,8 +681,6 @@
enter_lazy_tlb(mm, current);
/* We don't want this task to be frozen prematurely */
clear_freeze_flag(tsk);
- if (tsk->signal->oom_score_adj == OOM_SCORE_ADJ_MIN)
- atomic_dec(&mm->oom_disable_count);
task_unlock(tsk);
mm_update_next_owner(mm);
mmput(mm);
diff --git a/kernel/fork.c b/kernel/fork.c
index 8e6b6f4..70d7619 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -501,7 +501,6 @@
mm->cached_hole_size = ~0UL;
mm_init_aio(mm);
mm_init_owner(mm, p);
- atomic_set(&mm->oom_disable_count, 0);
if (likely(!mm_alloc_pgd(mm))) {
mm->def_flags = 0;
@@ -816,8 +815,6 @@
/* Initializing for Swap token stuff */
mm->token_priority = 0;
mm->last_interval = 0;
- if (tsk->signal->oom_score_adj == OOM_SCORE_ADJ_MIN)
- atomic_inc(&mm->oom_disable_count);
tsk->mm = mm;
tsk->active_mm = mm;
@@ -1391,13 +1388,8 @@
bad_fork_cleanup_namespaces:
exit_task_namespaces(p);
bad_fork_cleanup_mm:
- if (p->mm) {
- task_lock(p);
- if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN)
- atomic_dec(&p->mm->oom_disable_count);
- task_unlock(p);
+ if (p->mm)
mmput(p->mm);
- }
bad_fork_cleanup_signal:
if (!(clone_flags & CLONE_THREAD))
free_signal_struct(p->signal);
diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c
index e38544d..6cb7613 100644
--- a/kernel/irq/generic-chip.c
+++ b/kernel/irq/generic-chip.c
@@ -211,6 +211,7 @@
}
return gc;
}
+EXPORT_SYMBOL_GPL(irq_alloc_generic_chip);
/*
* Separate lockdep class for interrupt chip which can nest irq_desc
@@ -258,6 +259,7 @@
}
gc->irq_cnt = i - gc->irq_base;
}
+EXPORT_SYMBOL_GPL(irq_setup_generic_chip);
/**
* irq_setup_alt_chip - Switch to alternative chip
@@ -281,6 +283,7 @@
}
return -EINVAL;
}
+EXPORT_SYMBOL_GPL(irq_setup_alt_chip);
/**
* irq_remove_generic_chip - Remove a chip
@@ -311,6 +314,7 @@
irq_modify_status(i, clr, set);
}
}
+EXPORT_SYMBOL_GPL(irq_remove_generic_chip);
#ifdef CONFIG_PM
static int irq_gc_suspend(void)
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index b57a377..200ce83 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -20,15 +20,15 @@
void irq_domain_add(struct irq_domain *domain)
{
struct irq_data *d;
- int hwirq;
+ int hwirq, irq;
/*
* This assumes that the irq_domain owner has already allocated
* the irq_descs. This block will be removed when support for dynamic
* allocation of irq_descs is added to irq_domain.
*/
- for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
- d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
+ irq_domain_for_each_irq(domain, hwirq, irq) {
+ d = irq_get_irq_data(irq);
if (!d) {
WARN(1, "error: assigning domain to non existant irq_desc");
return;
@@ -54,15 +54,15 @@
void irq_domain_del(struct irq_domain *domain)
{
struct irq_data *d;
- int hwirq;
+ int hwirq, irq;
mutex_lock(&irq_domain_mutex);
list_del(&domain->list);
mutex_unlock(&irq_domain_mutex);
/* Clear the irq_domain assignments */
- for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
- d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
+ irq_domain_for_each_irq(domain, hwirq, irq) {
+ d = irq_get_irq_data(irq);
d->domain = NULL;
}
}
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 296fbc8..dc7bc08 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -498,7 +498,7 @@
while (hole_end <= crashk_res.end) {
unsigned long i;
- if (hole_end > KEXEC_CONTROL_MEMORY_LIMIT)
+ if (hole_end > KEXEC_CRASH_CONTROL_MEMORY_LIMIT)
break;
if (hole_end > crashk_res.end)
break;
@@ -999,6 +999,7 @@
kimage_free(xchg(&kexec_crash_image, NULL));
result = kimage_crash_alloc(&image, entry,
nr_segments, segments);
+ crash_map_reserved_pages();
}
if (result)
goto out;
@@ -1015,6 +1016,8 @@
goto out;
}
kimage_terminate(image);
+ if (flags & KEXEC_ON_CRASH)
+ crash_unmap_reserved_pages();
}
/* Install the new kernel, and Uninstall the old */
image = xchg(dest_image, image);
@@ -1026,6 +1029,18 @@
return result;
}
+/*
+ * Add and remove page tables for crashkernel memory
+ *
+ * Provide an empty default implementation here -- architecture
+ * code may override this
+ */
+void __weak crash_map_reserved_pages(void)
+{}
+
+void __weak crash_unmap_reserved_pages(void)
+{}
+
#ifdef CONFIG_COMPAT
asmlinkage long compat_sys_kexec_load(unsigned long entry,
unsigned long nr_segments,
@@ -1134,14 +1149,16 @@
goto unlock;
}
- start = roundup(start, PAGE_SIZE);
- end = roundup(start + new_size, PAGE_SIZE);
+ start = roundup(start, KEXEC_CRASH_MEM_ALIGN);
+ end = roundup(start + new_size, KEXEC_CRASH_MEM_ALIGN);
+ crash_map_reserved_pages();
crash_free_reserved_phys_range(end, crashk_res.end);
if ((start == end) && (crashk_res.parent != NULL))
release_resource(&crashk_res);
crashk_res.end = end - 1;
+ crash_unmap_reserved_pages();
unlock:
mutex_unlock(&kexec_mutex);
@@ -1380,24 +1397,23 @@
}
-
-void crash_save_vmcoreinfo(void)
+static void update_vmcoreinfo_note(void)
{
- u32 *buf;
+ u32 *buf = vmcoreinfo_note;
if (!vmcoreinfo_size)
return;
-
- vmcoreinfo_append_str("CRASHTIME=%ld", get_seconds());
-
- buf = (u32 *)vmcoreinfo_note;
-
buf = append_elf_note(buf, VMCOREINFO_NOTE_NAME, 0, vmcoreinfo_data,
vmcoreinfo_size);
-
final_note(buf);
}
+void crash_save_vmcoreinfo(void)
+{
+ vmcoreinfo_append_str("CRASHTIME=%ld", get_seconds());
+ update_vmcoreinfo_note();
+}
+
void vmcoreinfo_append_str(const char *fmt, ...)
{
va_list args;
@@ -1483,6 +1499,7 @@
VMCOREINFO_NUMBER(PG_swapcache);
arch_crash_save_vmcoreinfo();
+ update_vmcoreinfo_note();
return 0;
}
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index cedd998..deb5461 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -239,3 +239,7 @@
config PM_GENERIC_DOMAINS_RUNTIME
def_bool y
depends on PM_RUNTIME && PM_GENERIC_DOMAINS
+
+config CPU_PM
+ bool
+ depends on SUSPEND || CPU_IDLE
diff --git a/kernel/printk.c b/kernel/printk.c
index b7da183..1455a0d 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -532,6 +532,9 @@
}
early_param("ignore_loglevel", ignore_loglevel_setup);
+module_param_named(ignore_loglevel, ignore_loglevel, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ignore_loglevel, "ignore loglevel setting, to"
+ "print all kernel messages to the console.");
/*
* Write out chars from start to end - 1 inclusive
@@ -592,9 +595,6 @@
/* multi digit including the level and facility number */
char *endp = NULL;
- if (p[1] < '0' && p[1] > '9')
- return 0;
-
lev = (simple_strtoul(&p[1], &endp, 10) & 7);
if (endp == NULL || endp[0] != '>')
return 0;
@@ -1108,6 +1108,10 @@
return 1;
}
__setup("no_console_suspend", console_suspend_disable);
+module_param_named(console_suspend, console_suspend_enabled,
+ bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(console_suspend, "suspend console during suspend"
+ " and hibernate operations");
/**
* suspend_console - suspend the console subsystem
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index ba5070c..5b0951aa0 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -41,6 +41,7 @@
};
static DEFINE_PER_CPU(struct cpu_stopper, cpu_stopper);
+static bool stop_machine_initialized = false;
static void cpu_stop_init_done(struct cpu_stop_done *done, unsigned int nr_todo)
{
@@ -386,6 +387,8 @@
cpu_stop_cpu_callback(&cpu_stop_cpu_notifier, CPU_ONLINE, bcpu);
register_cpu_notifier(&cpu_stop_cpu_notifier);
+ stop_machine_initialized = true;
+
return 0;
}
early_initcall(cpu_stop_init);
@@ -485,6 +488,25 @@
.num_threads = num_online_cpus(),
.active_cpus = cpus };
+ if (!stop_machine_initialized) {
+ /*
+ * Handle the case where stop_machine() is called
+ * early in boot before stop_machine() has been
+ * initialized.
+ */
+ unsigned long flags;
+ int ret;
+
+ WARN_ON_ONCE(smdata.num_threads != 1);
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ ret = (*fn)(data);
+ local_irq_restore(flags);
+
+ return ret;
+ }
+
/* Set the initial state and stop all online cpus. */
set_state(&smdata, STOPMACHINE_PREPARE);
return stop_cpus(cpu_online_mask, stop_machine_cpu_stop, &smdata);
diff --git a/kernel/sys.c b/kernel/sys.c
index 5845950..d06c091 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1286,6 +1286,7 @@
memset(u->nodename + len, 0, sizeof(u->nodename) - len);
errno = 0;
}
+ uts_proc_notify(UTS_PROC_HOSTNAME);
up_write(&uts_sem);
return errno;
}
@@ -1336,6 +1337,7 @@
memset(u->domainname + len, 0, sizeof(u->domainname) - len);
errno = 0;
}
+ uts_proc_notify(UTS_PROC_DOMAINNAME);
up_write(&uts_sem);
return errno;
}
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index a9a5de0..47bfa16 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -145,6 +145,10 @@
cond_syscall(sys_io_cancel);
cond_syscall(sys_io_getevents);
cond_syscall(sys_syslog);
+cond_syscall(sys_process_vm_readv);
+cond_syscall(sys_process_vm_writev);
+cond_syscall(compat_sys_process_vm_readv);
+cond_syscall(compat_sys_process_vm_writev);
/* arch-specific weak syscall entries */
cond_syscall(sys_pciconfig_read);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 2d2ecdc..ae27196 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -57,6 +57,7 @@
#include <linux/pipe_fs_i.h>
#include <linux/oom.h>
#include <linux/kmod.h>
+#include <linux/capability.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
@@ -134,6 +135,7 @@
static int min_percpu_pagelist_fract = 8;
static int ngroups_max = NGROUPS_MAX;
+static const int cap_last_cap = CAP_LAST_CAP;
#ifdef CONFIG_INOTIFY_USER
#include <linux/inotify.h>
@@ -151,14 +153,6 @@
extern int unaligned_enabled;
#endif
-#ifdef CONFIG_S390
-#ifdef CONFIG_MATHEMU
-extern int sysctl_ieee_emulation_warnings;
-#endif
-extern int sysctl_userprocess_debug;
-extern int spin_retry;
-#endif
-
#ifdef CONFIG_IA64
extern int no_unaligned_warning;
extern int unaligned_dump_stack;
@@ -740,6 +734,13 @@
.mode = 0444,
.proc_handler = proc_dointvec,
},
+ {
+ .procname = "cap_last_cap",
+ .data = (void *)&cap_last_cap,
+ .maxlen = sizeof(int),
+ .mode = 0444,
+ .proc_handler = proc_dointvec,
+ },
#if defined(CONFIG_LOCKUP_DETECTOR)
{
.procname = "watchdog",
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index a2cd77e..3b0d48eb 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -13,6 +13,7 @@
#include <linux/uts.h>
#include <linux/utsname.h>
#include <linux/sysctl.h>
+#include <linux/wait.h>
static void *get_uts(ctl_table *table, int write)
{
@@ -51,12 +52,19 @@
uts_table.data = get_uts(table, write);
r = proc_dostring(&uts_table,write,buffer,lenp, ppos);
put_uts(table, write, uts_table.data);
+
+ if (write)
+ proc_sys_poll_notify(table->poll);
+
return r;
}
#else
#define proc_do_uts_string NULL
#endif
+static DEFINE_CTL_TABLE_POLL(hostname_poll);
+static DEFINE_CTL_TABLE_POLL(domainname_poll);
+
static struct ctl_table uts_kern_table[] = {
{
.procname = "ostype",
@@ -85,6 +93,7 @@
.maxlen = sizeof(init_uts_ns.name.nodename),
.mode = 0644,
.proc_handler = proc_do_uts_string,
+ .poll = &hostname_poll,
},
{
.procname = "domainname",
@@ -92,6 +101,7 @@
.maxlen = sizeof(init_uts_ns.name.domainname),
.mode = 0644,
.proc_handler = proc_do_uts_string,
+ .poll = &domainname_poll,
},
{}
};
@@ -105,6 +115,19 @@
{}
};
+#ifdef CONFIG_PROC_SYSCTL
+/*
+ * Notify userspace about a change in a certain entry of uts_kern_table,
+ * identified by the parameter proc.
+ */
+void uts_proc_notify(enum uts_proc proc)
+{
+ struct ctl_table *table = &uts_kern_table[proc];
+
+ proc_sys_poll_notify(table->poll);
+}
+#endif
+
static int __init utsname_sysctl_init(void)
{
register_sysctl_table(uts_root_table);
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index d680381..1d7bca7 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -481,6 +481,8 @@
}
}
+/* sysctl functions */
+#ifdef CONFIG_SYSCTL
static void watchdog_enable_all_cpus(void)
{
int cpu;
@@ -510,8 +512,6 @@
}
-/* sysctl functions */
-#ifdef CONFIG_SYSCTL
/*
* proc handler for /proc/sys/kernel/nmi_watchdog,watchdog_thresh
*/
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 75330bd..82928f5 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -248,8 +248,9 @@
to determine when a task has become non-responsive and should
be considered hung.
- It can be adjusted at runtime via the kernel.hung_task_timeout
- sysctl or by writing a value to /proc/sys/kernel/hung_task_timeout.
+ It can be adjusted at runtime via the kernel.hung_task_timeout_secs
+ sysctl or by writing a value to
+ /proc/sys/kernel/hung_task_timeout_secs.
A timeout of 0 disables the check. The default is two minutes.
Keeping the default should be fine in most cases.
@@ -1070,6 +1071,17 @@
Only works with drivers that use the generic timeout handling,
for others it wont do anything.
+config FAIL_MMC_REQUEST
+ bool "Fault-injection capability for MMC IO"
+ select DEBUG_FS
+ depends on FAULT_INJECTION && MMC
+ help
+ Provide fault-injection capability for MMC IO.
+ This will make the mmc core return data errors. This is
+ useful to test the error handling in the mmc block device
+ and to test how the mmc host driver handles retries from
+ the block device.
+
config FAULT_INJECTION_DEBUG_FS
bool "Debugfs entries for fault-injection capabilities"
depends on FAULT_INJECTION && SYSFS && DEBUG_FS
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 2f4412e..0d4a127 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -419,7 +419,7 @@
{
int c, old_c, totaldigits, ndigits, nchunks, nbits;
u32 chunk;
- const char __user *ubuf = buf;
+ const char __user __force *ubuf = (const char __user __force *)buf;
bitmap_zero(maskp, nmaskbits);
@@ -504,7 +504,9 @@
{
if (!access_ok(VERIFY_READ, ubuf, ulen))
return -EFAULT;
- return __bitmap_parse((const char *)ubuf, ulen, 1, maskp, nmaskbits);
+ return __bitmap_parse((const char __force *)ubuf,
+ ulen, 1, maskp, nmaskbits);
+
}
EXPORT_SYMBOL(bitmap_parse_user);
@@ -594,7 +596,7 @@
{
unsigned a, b;
int c, old_c, totaldigits;
- const char __user *ubuf = buf;
+ const char __user __force *ubuf = (const char __user __force *)buf;
int exp_digit, in_range;
totaldigits = c = 0;
@@ -694,7 +696,7 @@
{
if (!access_ok(VERIFY_READ, ubuf, ulen))
return -EFAULT;
- return __bitmap_parselist((const char *)ubuf,
+ return __bitmap_parselist((const char __force *)ubuf,
ulen, 1, maskp, nmaskbits);
}
EXPORT_SYMBOL(bitmap_parselist_user);
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index db07bfd..79700fa 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -62,6 +62,8 @@
#endif
};
+typedef bool (*match_fn)(struct dma_debug_entry *, struct dma_debug_entry *);
+
struct hash_bucket {
struct list_head list;
spinlock_t lock;
@@ -240,18 +242,37 @@
spin_unlock_irqrestore(&bucket->lock, __flags);
}
+static bool exact_match(struct dma_debug_entry *a, struct dma_debug_entry *b)
+{
+ return ((a->dev_addr == a->dev_addr) &&
+ (a->dev == b->dev)) ? true : false;
+}
+
+static bool containing_match(struct dma_debug_entry *a,
+ struct dma_debug_entry *b)
+{
+ if (a->dev != b->dev)
+ return false;
+
+ if ((b->dev_addr <= a->dev_addr) &&
+ ((b->dev_addr + b->size) >= (a->dev_addr + a->size)))
+ return true;
+
+ return false;
+}
+
/*
* Search a given entry in the hash bucket list
*/
-static struct dma_debug_entry *hash_bucket_find(struct hash_bucket *bucket,
- struct dma_debug_entry *ref)
+static struct dma_debug_entry *__hash_bucket_find(struct hash_bucket *bucket,
+ struct dma_debug_entry *ref,
+ match_fn match)
{
struct dma_debug_entry *entry, *ret = NULL;
int matches = 0, match_lvl, last_lvl = 0;
list_for_each_entry(entry, &bucket->list, list) {
- if ((entry->dev_addr != ref->dev_addr) ||
- (entry->dev != ref->dev))
+ if (!match(ref, entry))
continue;
/*
@@ -293,6 +314,39 @@
return ret;
}
+static struct dma_debug_entry *bucket_find_exact(struct hash_bucket *bucket,
+ struct dma_debug_entry *ref)
+{
+ return __hash_bucket_find(bucket, ref, exact_match);
+}
+
+static struct dma_debug_entry *bucket_find_contain(struct hash_bucket **bucket,
+ struct dma_debug_entry *ref,
+ unsigned long *flags)
+{
+
+ unsigned int max_range = dma_get_max_seg_size(ref->dev);
+ struct dma_debug_entry *entry, index = *ref;
+ unsigned int range = 0;
+
+ while (range <= max_range) {
+ entry = __hash_bucket_find(*bucket, &index, containing_match);
+
+ if (entry)
+ return entry;
+
+ /*
+ * Nothing found, go back a hash bucket
+ */
+ put_hash_bucket(*bucket, flags);
+ range += (1 << HASH_FN_SHIFT);
+ index.dev_addr -= (1 << HASH_FN_SHIFT);
+ *bucket = get_hash_bucket(&index, flags);
+ }
+
+ return NULL;
+}
+
/*
* Add an entry to a hash bucket
*/
@@ -802,7 +856,7 @@
}
bucket = get_hash_bucket(ref, &flags);
- entry = hash_bucket_find(bucket, ref);
+ entry = bucket_find_exact(bucket, ref);
if (!entry) {
err_printk(ref->dev, NULL, "DMA-API: device driver tries "
@@ -902,7 +956,7 @@
bucket = get_hash_bucket(ref, &flags);
- entry = hash_bucket_find(bucket, ref);
+ entry = bucket_find_contain(&bucket, ref, &flags);
if (!entry) {
err_printk(dev, NULL, "DMA-API: device driver tries "
@@ -1060,7 +1114,7 @@
int mapped_ents;
bucket = get_hash_bucket(ref, &flags);
- entry = hash_bucket_find(bucket, ref);
+ entry = bucket_find_exact(bucket, ref);
mapped_ents = 0;
if (entry)
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index f193b77..4f75540 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -14,7 +14,7 @@
* setup_fault_attr() is a helper function for various __setup handlers, so it
* returns 0 on error, because that is what __setup handlers do.
*/
-int __init setup_fault_attr(struct fault_attr *attr, char *str)
+int setup_fault_attr(struct fault_attr *attr, char *str)
{
unsigned long probability;
unsigned long interval;
@@ -36,6 +36,7 @@
return 1;
}
+EXPORT_SYMBOL_GPL(setup_fault_attr);
static void fail_dump(struct fault_attr *attr)
{
@@ -130,6 +131,7 @@
return true;
}
+EXPORT_SYMBOL_GPL(should_fail);
#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
@@ -243,5 +245,6 @@
return ERR_PTR(-ENOMEM);
}
+EXPORT_SYMBOL_GPL(fault_create_debugfs_attr);
#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
diff --git a/lib/idr.c b/lib/idr.c
index 5acf9bb..ed055b2 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -767,8 +767,8 @@
* @starting_id: id to start search at
* @p_id: pointer to the allocated handle
*
- * Allocate new ID above or equal to @ida. It should be called with
- * any required locks.
+ * Allocate new ID above or equal to @starting_id. It should be called
+ * with any required locks.
*
* If memory is required, it will return %-EAGAIN, you should unlock
* and go back to the ida_pre_get() call. If the ida is full, it will
@@ -944,6 +944,7 @@
{
int ret, id;
unsigned int max;
+ unsigned long flags;
BUG_ON((int)start < 0);
BUG_ON((int)end < 0);
@@ -959,7 +960,7 @@
if (!ida_pre_get(ida, gfp_mask))
return -ENOMEM;
- spin_lock(&simple_ida_lock);
+ spin_lock_irqsave(&simple_ida_lock, flags);
ret = ida_get_new_above(ida, start, &id);
if (!ret) {
if (id > max) {
@@ -969,7 +970,7 @@
ret = id;
}
}
- spin_unlock(&simple_ida_lock);
+ spin_unlock_irqrestore(&simple_ida_lock, flags);
if (unlikely(ret == -EAGAIN))
goto again;
@@ -985,10 +986,12 @@
*/
void ida_simple_remove(struct ida *ida, unsigned int id)
{
+ unsigned long flags;
+
BUG_ON((int)id < 0);
- spin_lock(&simple_ida_lock);
+ spin_lock_irqsave(&simple_ida_lock, flags);
ida_remove(ida, id);
- spin_unlock(&simple_ida_lock);
+ spin_unlock_irqrestore(&simple_ida_lock, flags);
}
EXPORT_SYMBOL(ida_simple_remove);
diff --git a/lib/kstrtox.c b/lib/kstrtox.c
index 5e06675..7a94c8f 100644
--- a/lib/kstrtox.c
+++ b/lib/kstrtox.c
@@ -18,26 +18,40 @@
#include <linux/module.h>
#include <linux/types.h>
#include <asm/uaccess.h>
+#include "kstrtox.h"
-static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res)
+const char *_parse_integer_fixup_radix(const char *s, unsigned int *base)
{
- unsigned long long acc;
- int ok;
-
- if (base == 0) {
+ if (*base == 0) {
if (s[0] == '0') {
if (_tolower(s[1]) == 'x' && isxdigit(s[2]))
- base = 16;
+ *base = 16;
else
- base = 8;
+ *base = 8;
} else
- base = 10;
+ *base = 10;
}
- if (base == 16 && s[0] == '0' && _tolower(s[1]) == 'x')
+ if (*base == 16 && s[0] == '0' && _tolower(s[1]) == 'x')
s += 2;
+ return s;
+}
- acc = 0;
- ok = 0;
+/*
+ * Convert non-negative integer string representation in explicitly given radix
+ * to an integer.
+ * Return number of characters consumed maybe or-ed with overflow bit.
+ * If overflow occurs, result integer (incorrect) is still returned.
+ *
+ * Don't you dare use this function.
+ */
+unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *res)
+{
+ unsigned int rv;
+ int overflow;
+
+ *res = 0;
+ rv = 0;
+ overflow = 0;
while (*s) {
unsigned int val;
@@ -45,23 +59,40 @@
val = *s - '0';
else if ('a' <= _tolower(*s) && _tolower(*s) <= 'f')
val = _tolower(*s) - 'a' + 10;
- else if (*s == '\n' && *(s + 1) == '\0')
- break;
else
- return -EINVAL;
+ break;
if (val >= base)
- return -EINVAL;
- if (acc > div_u64(ULLONG_MAX - val, base))
- return -ERANGE;
- acc = acc * base + val;
- ok = 1;
-
+ break;
+ if (*res > div_u64(ULLONG_MAX - val, base))
+ overflow = 1;
+ *res = *res * base + val;
+ rv++;
s++;
}
- if (!ok)
+ if (overflow)
+ rv |= KSTRTOX_OVERFLOW;
+ return rv;
+}
+
+static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res)
+{
+ unsigned long long _res;
+ unsigned int rv;
+
+ s = _parse_integer_fixup_radix(s, &base);
+ rv = _parse_integer(s, base, &_res);
+ if (rv & KSTRTOX_OVERFLOW)
+ return -ERANGE;
+ rv &= ~KSTRTOX_OVERFLOW;
+ if (rv == 0)
return -EINVAL;
- *res = acc;
+ s += rv;
+ if (*s == '\n')
+ s++;
+ if (*s)
+ return -EINVAL;
+ *res = _res;
return 0;
}
diff --git a/lib/kstrtox.h b/lib/kstrtox.h
new file mode 100644
index 0000000..f13eeea
--- /dev/null
+++ b/lib/kstrtox.h
@@ -0,0 +1,8 @@
+#ifndef _LIB_KSTRTOX_H
+#define _LIB_KSTRTOX_H
+
+#define KSTRTOX_OVERFLOW (1U << 31)
+const char *_parse_integer_fixup_radix(const char *s, unsigned int *base);
+unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *res);
+
+#endif
diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c
index f087105..f8a3f1a 100644
--- a/lib/percpu_counter.c
+++ b/lib/percpu_counter.c
@@ -10,8 +10,10 @@
#include <linux/module.h>
#include <linux/debugobjects.h>
+#ifdef CONFIG_HOTPLUG_CPU
static LIST_HEAD(percpu_counters);
static DEFINE_MUTEX(percpu_counters_lock);
+#endif
#ifdef CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index a2f9da5..d9df745 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -576,7 +576,6 @@
{
unsigned int height, shift;
struct radix_tree_node *node;
- int saw_unset_tag = 0;
/* check the root's tag bit */
if (!root_tag_get(root, tag))
@@ -603,15 +602,10 @@
return 0;
offset = (index >> shift) & RADIX_TREE_MAP_MASK;
-
- /*
- * This is just a debug check. Later, we can bale as soon as
- * we see an unset tag.
- */
if (!tag_get(node, tag, offset))
- saw_unset_tag = 1;
+ return 0;
if (height == 1)
- return !!tag_get(node, tag, offset);
+ return 1;
node = rcu_dereference_raw(node->slots[offset]);
shift -= RADIX_TREE_MAP_SHIFT;
height--;
diff --git a/lib/spinlock_debug.c b/lib/spinlock_debug.c
index 4755b98..5f3eacdd 100644
--- a/lib/spinlock_debug.c
+++ b/lib/spinlock_debug.c
@@ -49,13 +49,10 @@
EXPORT_SYMBOL(__rwlock_init);
-static void spin_bug(raw_spinlock_t *lock, const char *msg)
+static void spin_dump(raw_spinlock_t *lock, const char *msg)
{
struct task_struct *owner = NULL;
- if (!debug_locks_off())
- return;
-
if (lock->owner && lock->owner != SPINLOCK_OWNER_INIT)
owner = lock->owner;
printk(KERN_EMERG "BUG: spinlock %s on CPU#%d, %s/%d\n",
@@ -70,6 +67,14 @@
dump_stack();
}
+static void spin_bug(raw_spinlock_t *lock, const char *msg)
+{
+ if (!debug_locks_off())
+ return;
+
+ spin_dump(lock, msg);
+}
+
#define SPIN_BUG_ON(cond, lock, msg) if (unlikely(cond)) spin_bug(lock, msg)
static inline void
@@ -113,11 +118,7 @@
/* lockup suspected: */
if (print_once) {
print_once = 0;
- printk(KERN_EMERG "BUG: spinlock lockup on CPU#%d, "
- "%s/%d, %p\n",
- raw_smp_processor_id(), current->comm,
- task_pid_nr(current), lock);
- dump_stack();
+ spin_dump(lock, "lockup");
#ifdef CONFIG_SMP
trigger_all_cpu_backtrace();
#endif
diff --git a/lib/string.c b/lib/string.c
index 01fad9b..dc4a863 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -360,7 +360,6 @@
size_t size;
char *end;
- s = skip_spaces(s);
size = strlen(s);
if (!size)
return s;
@@ -370,7 +369,7 @@
end--;
*(end + 1) = '\0';
- return s;
+ return skip_spaces(s);
}
EXPORT_SYMBOL(strim);
@@ -756,3 +755,57 @@
}
EXPORT_SYMBOL(memchr);
#endif
+
+static void *check_bytes8(const u8 *start, u8 value, unsigned int bytes)
+{
+ while (bytes) {
+ if (*start != value)
+ return (void *)start;
+ start++;
+ bytes--;
+ }
+ return NULL;
+}
+
+/**
+ * memchr_inv - Find an unmatching character in an area of memory.
+ * @start: The memory area
+ * @c: Find a character other than c
+ * @bytes: The size of the area.
+ *
+ * returns the address of the first character other than @c, or %NULL
+ * if the whole buffer contains just @c.
+ */
+void *memchr_inv(const void *start, int c, size_t bytes)
+{
+ u8 value = c;
+ u64 value64;
+ unsigned int words, prefix;
+
+ if (bytes <= 16)
+ return check_bytes8(start, value, bytes);
+
+ value64 = value | value << 8 | value << 16 | value << 24;
+ value64 = (value64 & 0xffffffff) | value64 << 32;
+ prefix = 8 - ((unsigned long)start) % 8;
+
+ if (prefix) {
+ u8 *r = check_bytes8(start, value, prefix);
+ if (r)
+ return r;
+ start += prefix;
+ bytes -= prefix;
+ }
+
+ words = bytes / 8;
+
+ while (words) {
+ if (*(u64 *)start != value64)
+ return check_bytes8(start, value, 8);
+ start += 8;
+ words--;
+ }
+
+ return check_bytes8(start, value, bytes % 8);
+}
+EXPORT_SYMBOL(memchr_inv);
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index d7222a9..993599e 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -31,17 +31,7 @@
#include <asm/div64.h>
#include <asm/sections.h> /* for dereference_function_descriptor() */
-static unsigned int simple_guess_base(const char *cp)
-{
- if (cp[0] == '0') {
- if (_tolower(cp[1]) == 'x' && isxdigit(cp[2]))
- return 16;
- else
- return 8;
- } else {
- return 10;
- }
-}
+#include "kstrtox.h"
/**
* simple_strtoull - convert a string to an unsigned long long
@@ -51,23 +41,14 @@
*/
unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base)
{
- unsigned long long result = 0;
+ unsigned long long result;
+ unsigned int rv;
- if (!base)
- base = simple_guess_base(cp);
+ cp = _parse_integer_fixup_radix(cp, &base);
+ rv = _parse_integer(cp, base, &result);
+ /* FIXME */
+ cp += (rv & ~KSTRTOX_OVERFLOW);
- if (base == 16 && cp[0] == '0' && _tolower(cp[1]) == 'x')
- cp += 2;
-
- while (isxdigit(*cp)) {
- unsigned int value;
-
- value = isdigit(*cp) ? *cp - '0' : _tolower(*cp) - 'a' + 10;
- if (value >= base)
- break;
- result = result * base + value;
- cp++;
- }
if (endp)
*endp = (char *)cp;
@@ -566,7 +547,7 @@
}
for (i = 0; i < 6; i++) {
- p = pack_hex_byte(p, addr[i]);
+ p = hex_byte_pack(p, addr[i]);
if (fmt[0] == 'M' && i != 5)
*p++ = separator;
}
@@ -686,13 +667,13 @@
lo = word & 0xff;
if (hi) {
if (hi > 0x0f)
- p = pack_hex_byte(p, hi);
+ p = hex_byte_pack(p, hi);
else
*p++ = hex_asc_lo(hi);
- p = pack_hex_byte(p, lo);
+ p = hex_byte_pack(p, lo);
}
else if (lo > 0x0f)
- p = pack_hex_byte(p, lo);
+ p = hex_byte_pack(p, lo);
else
*p++ = hex_asc_lo(lo);
needcolon = true;
@@ -714,8 +695,8 @@
int i;
for (i = 0; i < 8; i++) {
- p = pack_hex_byte(p, *addr++);
- p = pack_hex_byte(p, *addr++);
+ p = hex_byte_pack(p, *addr++);
+ p = hex_byte_pack(p, *addr++);
if (fmt[0] == 'I' && i != 7)
*p++ = ':';
}
@@ -773,7 +754,7 @@
}
for (i = 0; i < 16; i++) {
- p = pack_hex_byte(p, addr[index[i]]);
+ p = hex_byte_pack(p, addr[index[i]]);
switch (i) {
case 3:
case 5:
diff --git a/mm/Kconfig b/mm/Kconfig
index f2f1ca1..011b110 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -131,6 +131,9 @@
config HAVE_MEMBLOCK
boolean
+config NO_BOOTMEM
+ boolean
+
# eventually, we can have this option just 'select SPARSEMEM'
config MEMORY_HOTPLUG
bool "Allow for memory hot-add"
diff --git a/mm/Makefile b/mm/Makefile
index 836e416..50ec00e 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -5,7 +5,8 @@
mmu-y := nommu.o
mmu-$(CONFIG_MMU) := fremap.o highmem.o madvise.o memory.o mincore.o \
mlock.o mmap.o mprotect.o mremap.o msync.o rmap.o \
- vmalloc.o pagewalk.o pgtable-generic.o
+ vmalloc.o pagewalk.o pgtable-generic.o \
+ process_vm_access.o
obj-y := filemap.o mempool.o oom_kill.o fadvise.o \
maccess.o page_alloc.o page-writeback.o \
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index a87da52..7520ef0 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -404,9 +404,8 @@
/*
* In the following loop we are going to check whether we have
* some work to do without any synchronization with tasks
- * waking us up to do work for them. So we have to set task
- * state already here so that we don't miss wakeups coming
- * after we verify some condition.
+ * waking us up to do work for them. Set the task state here
+ * so that we don't miss wakeups after verifying conditions.
*/
set_current_state(TASK_INTERRUPTIBLE);
diff --git a/mm/compaction.c b/mm/compaction.c
index 6cc604b..899d956 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -35,10 +35,6 @@
unsigned long migrate_pfn; /* isolate_migratepages search base */
bool sync; /* Synchronous migration */
- /* Account for isolated anon and file pages */
- unsigned long nr_anon;
- unsigned long nr_file;
-
unsigned int order; /* order a direct compactor needs */
int migratetype; /* MOVABLE, RECLAIMABLE etc */
struct zone *zone;
@@ -223,17 +219,13 @@
static void acct_isolated(struct zone *zone, struct compact_control *cc)
{
struct page *page;
- unsigned int count[NR_LRU_LISTS] = { 0, };
+ unsigned int count[2] = { 0, };
- list_for_each_entry(page, &cc->migratepages, lru) {
- int lru = page_lru_base_type(page);
- count[lru]++;
- }
+ list_for_each_entry(page, &cc->migratepages, lru)
+ count[!!page_is_file_cache(page)]++;
- cc->nr_anon = count[LRU_ACTIVE_ANON] + count[LRU_INACTIVE_ANON];
- cc->nr_file = count[LRU_ACTIVE_FILE] + count[LRU_INACTIVE_FILE];
- __mod_zone_page_state(zone, NR_ISOLATED_ANON, cc->nr_anon);
- __mod_zone_page_state(zone, NR_ISOLATED_FILE, cc->nr_file);
+ __mod_zone_page_state(zone, NR_ISOLATED_ANON, count[0]);
+ __mod_zone_page_state(zone, NR_ISOLATED_FILE, count[1]);
}
/* Similar to reclaim, but different enough that they don't share logic */
@@ -269,6 +261,7 @@
unsigned long last_pageblock_nr = 0, pageblock_nr;
unsigned long nr_scanned = 0, nr_isolated = 0;
struct list_head *migratelist = &cc->migratepages;
+ isolate_mode_t mode = ISOLATE_ACTIVE|ISOLATE_INACTIVE;
/* Do not scan outside zone boundaries */
low_pfn = max(cc->migrate_pfn, zone->zone_start_pfn);
@@ -356,8 +349,11 @@
continue;
}
+ if (!cc->sync)
+ mode |= ISOLATE_CLEAN;
+
/* Try isolate the page */
- if (__isolate_lru_page(page, ISOLATE_BOTH, 0) != 0)
+ if (__isolate_lru_page(page, mode, 0) != 0)
continue;
VM_BUG_ON(PageTransCompound(page));
@@ -586,7 +582,7 @@
return ret;
}
-unsigned long compact_zone_order(struct zone *zone,
+static unsigned long compact_zone_order(struct zone *zone,
int order, gfp_t gfp_mask,
bool sync)
{
diff --git a/mm/debug-pagealloc.c b/mm/debug-pagealloc.c
index a1e3324..7cea557 100644
--- a/mm/debug-pagealloc.c
+++ b/mm/debug-pagealloc.c
@@ -1,7 +1,10 @@
#include <linux/kernel.h>
+#include <linux/string.h>
#include <linux/mm.h>
+#include <linux/highmem.h>
#include <linux/page-debug-flags.h>
#include <linux/poison.h>
+#include <linux/ratelimit.h>
static inline void set_page_poison(struct page *page)
{
@@ -18,28 +21,13 @@
return test_bit(PAGE_DEBUG_FLAG_POISON, &page->debug_flags);
}
-static void poison_highpage(struct page *page)
-{
- /*
- * Page poisoning for highmem pages is not implemented.
- *
- * This can be called from interrupt contexts.
- * So we need to create a new kmap_atomic slot for this
- * application and it will need interrupt protection.
- */
-}
-
static void poison_page(struct page *page)
{
- void *addr;
+ void *addr = kmap_atomic(page);
- if (PageHighMem(page)) {
- poison_highpage(page);
- return;
- }
set_page_poison(page);
- addr = page_address(page);
memset(addr, PAGE_POISON, PAGE_SIZE);
+ kunmap_atomic(addr);
}
static void poison_pages(struct page *page, int n)
@@ -59,14 +47,12 @@
static void check_poison_mem(unsigned char *mem, size_t bytes)
{
+ static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 10);
unsigned char *start;
unsigned char *end;
- for (start = mem; start < mem + bytes; start++) {
- if (*start != PAGE_POISON)
- break;
- }
- if (start == mem + bytes)
+ start = memchr_inv(mem, PAGE_POISON, bytes);
+ if (!start)
return;
for (end = mem + bytes - 1; end > start; end--) {
@@ -74,7 +60,7 @@
break;
}
- if (!printk_ratelimit())
+ if (!__ratelimit(&ratelimit))
return;
else if (start == end && single_bit_flip(*start, PAGE_POISON))
printk(KERN_ERR "pagealloc: single bit error\n");
@@ -86,27 +72,17 @@
dump_stack();
}
-static void unpoison_highpage(struct page *page)
-{
- /*
- * See comment in poison_highpage().
- * Highmem pages should not be poisoned for now
- */
- BUG_ON(page_poison(page));
-}
-
static void unpoison_page(struct page *page)
{
- if (PageHighMem(page)) {
- unpoison_highpage(page);
- return;
- }
- if (page_poison(page)) {
- void *addr = page_address(page);
+ void *addr;
- check_poison_mem(addr, PAGE_SIZE);
- clear_page_poison(page);
- }
+ if (!page_poison(page))
+ return;
+
+ addr = kmap_atomic(page);
+ check_poison_mem(addr, PAGE_SIZE);
+ clear_page_poison(page);
+ kunmap_atomic(addr);
}
static void unpoison_pages(struct page *page, int n)
diff --git a/mm/filemap.c b/mm/filemap.c
index 7771871..5cf820a 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2115,6 +2115,7 @@
} else {
const struct iovec *iov = i->iov;
size_t base = i->iov_offset;
+ unsigned long nr_segs = i->nr_segs;
/*
* The !iov->iov_len check ensures we skip over unlikely
@@ -2130,11 +2131,13 @@
base += copy;
if (iov->iov_len == base) {
iov++;
+ nr_segs--;
base = 0;
}
}
i->iov = iov;
i->iov_offset = base;
+ i->nr_segs = nr_segs;
}
}
EXPORT_SYMBOL(iov_iter_advance);
diff --git a/mm/highmem.c b/mm/highmem.c
index 5ef672c..e159a7b 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -250,7 +250,7 @@
#endif
/**
- * kunmap_high - map a highmem page into memory
+ * kunmap_high - unmap a highmem page into memory
* @page: &struct page to unmap
*
* If ARCH_NEEDS_KMAP_HIGH_GET is not defined then this may be called
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index e2d1587..4298aba 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -89,7 +89,8 @@
struct list_head mm_head;
struct mm_slot *mm_slot;
unsigned long address;
-} khugepaged_scan = {
+};
+static struct khugepaged_scan khugepaged_scan = {
.mm_head = LIST_HEAD_INIT(khugepaged_scan.mm_head),
};
@@ -829,7 +830,7 @@
for (i = 0; i < HPAGE_PMD_NR; i++) {
copy_user_highpage(pages[i], page + i,
- haddr + PAGE_SHIFT*i, vma);
+ haddr + PAGE_SIZE * i, vma);
__SetPageUptodate(pages[i]);
cond_resched();
}
@@ -989,7 +990,7 @@
page += (addr & ~HPAGE_PMD_MASK) >> PAGE_SHIFT;
VM_BUG_ON(!PageCompound(page));
if (flags & FOLL_GET)
- get_page(page);
+ get_page_foll(page);
out:
return page;
@@ -1052,6 +1053,51 @@
return ret;
}
+int move_huge_pmd(struct vm_area_struct *vma, struct vm_area_struct *new_vma,
+ unsigned long old_addr,
+ unsigned long new_addr, unsigned long old_end,
+ pmd_t *old_pmd, pmd_t *new_pmd)
+{
+ int ret = 0;
+ pmd_t pmd;
+
+ struct mm_struct *mm = vma->vm_mm;
+
+ if ((old_addr & ~HPAGE_PMD_MASK) ||
+ (new_addr & ~HPAGE_PMD_MASK) ||
+ old_end - old_addr < HPAGE_PMD_SIZE ||
+ (new_vma->vm_flags & VM_NOHUGEPAGE))
+ goto out;
+
+ /*
+ * The destination pmd shouldn't be established, free_pgtables()
+ * should have release it.
+ */
+ if (WARN_ON(!pmd_none(*new_pmd))) {
+ VM_BUG_ON(pmd_trans_huge(*new_pmd));
+ goto out;
+ }
+
+ spin_lock(&mm->page_table_lock);
+ if (likely(pmd_trans_huge(*old_pmd))) {
+ if (pmd_trans_splitting(*old_pmd)) {
+ spin_unlock(&mm->page_table_lock);
+ wait_split_huge_page(vma->anon_vma, old_pmd);
+ ret = -1;
+ } else {
+ pmd = pmdp_get_and_clear(mm, old_addr, old_pmd);
+ VM_BUG_ON(!pmd_none(*new_pmd));
+ set_pmd_at(mm, new_addr, new_pmd, pmd);
+ spin_unlock(&mm->page_table_lock);
+ ret = 1;
+ }
+ } else {
+ spin_unlock(&mm->page_table_lock);
+ }
+out:
+ return ret;
+}
+
int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
unsigned long addr, pgprot_t newprot)
{
@@ -1156,6 +1202,7 @@
unsigned long head_index = page->index;
struct zone *zone = page_zone(page);
int zonestat;
+ int tail_count = 0;
/* prevent PageLRU to go away from under us, and freeze lru stats */
spin_lock_irq(&zone->lru_lock);
@@ -1164,11 +1211,27 @@
for (i = 1; i < HPAGE_PMD_NR; i++) {
struct page *page_tail = page + i;
- /* tail_page->_count cannot change */
- atomic_sub(atomic_read(&page_tail->_count), &page->_count);
- BUG_ON(page_count(page) <= 0);
- atomic_add(page_mapcount(page) + 1, &page_tail->_count);
- BUG_ON(atomic_read(&page_tail->_count) <= 0);
+ /* tail_page->_mapcount cannot change */
+ BUG_ON(page_mapcount(page_tail) < 0);
+ tail_count += page_mapcount(page_tail);
+ /* check for overflow */
+ BUG_ON(tail_count < 0);
+ BUG_ON(atomic_read(&page_tail->_count) != 0);
+ /*
+ * tail_page->_count is zero and not changing from
+ * under us. But get_page_unless_zero() may be running
+ * from under us on the tail_page. If we used
+ * atomic_set() below instead of atomic_add(), we
+ * would then run atomic_set() concurrently with
+ * get_page_unless_zero(), and atomic_set() is
+ * implemented in C not using locked ops. spin_unlock
+ * on x86 sometime uses locked ops because of PPro
+ * errata 66, 92, so unless somebody can guarantee
+ * atomic_set() here would be safe on all archs (and
+ * not only on x86), it's safer to use atomic_add().
+ */
+ atomic_add(page_mapcount(page) + page_mapcount(page_tail) + 1,
+ &page_tail->_count);
/* after clearing PageTail the gup refcount can be released */
smp_mb();
@@ -1186,10 +1249,7 @@
(1L << PG_uptodate)));
page_tail->flags |= (1L << PG_dirty);
- /*
- * 1) clear PageTail before overwriting first_page
- * 2) clear PageTail before clearing PageHead for VM_BUG_ON
- */
+ /* clear PageTail before overwriting first_page */
smp_wmb();
/*
@@ -1206,7 +1266,6 @@
* status is achieved setting a reserved bit in the
* pmd, not by clearing the present bit.
*/
- BUG_ON(page_mapcount(page_tail));
page_tail->_mapcount = page->_mapcount;
BUG_ON(page_tail->mapping);
@@ -1223,6 +1282,8 @@
lru_add_page_tail(zone, page, page_tail);
}
+ atomic_sub(tail_count, &page->_count);
+ BUG_ON(atomic_read(&page->_count) <= 0);
__dec_zone_page_state(page, NR_ANON_TRANSPARENT_HUGEPAGES);
__mod_zone_page_state(zone, NR_ANON_PAGES, HPAGE_PMD_NR);
@@ -1906,7 +1967,7 @@
BUG_ON(!pmd_none(*pmd));
page_add_new_anon_rmap(new_page, vma, address);
set_pmd_at(mm, address, pmd, _pmd);
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, _pmd);
prepare_pmd_huge_pte(pgtable, mm);
mm->nr_ptes--;
spin_unlock(&mm->page_table_lock);
@@ -2024,6 +2085,8 @@
static unsigned int khugepaged_scan_mm_slot(unsigned int pages,
struct page **hpage)
+ __releases(&khugepaged_mm_lock)
+ __acquires(&khugepaged_mm_lock)
{
struct mm_slot *mm_slot;
struct mm_struct *mm;
diff --git a/mm/internal.h b/mm/internal.h
index d071d38..2189af4 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -37,6 +37,52 @@
atomic_dec(&page->_count);
}
+static inline void __get_page_tail_foll(struct page *page,
+ bool get_page_head)
+{
+ /*
+ * If we're getting a tail page, the elevated page->_count is
+ * required only in the head page and we will elevate the head
+ * page->_count and tail page->_mapcount.
+ *
+ * We elevate page_tail->_mapcount for tail pages to force
+ * page_tail->_count to be zero at all times to avoid getting
+ * false positives from get_page_unless_zero() with
+ * speculative page access (like in
+ * page_cache_get_speculative()) on tail pages.
+ */
+ VM_BUG_ON(atomic_read(&page->first_page->_count) <= 0);
+ VM_BUG_ON(atomic_read(&page->_count) != 0);
+ VM_BUG_ON(page_mapcount(page) < 0);
+ if (get_page_head)
+ atomic_inc(&page->first_page->_count);
+ atomic_inc(&page->_mapcount);
+}
+
+/*
+ * This is meant to be called as the FOLL_GET operation of
+ * follow_page() and it must be called while holding the proper PT
+ * lock while the pte (or pmd_trans_huge) is still mapping the page.
+ */
+static inline void get_page_foll(struct page *page)
+{
+ if (unlikely(PageTail(page)))
+ /*
+ * This is safe only because
+ * __split_huge_page_refcount() can't run under
+ * get_page_foll() because we hold the proper PT lock.
+ */
+ __get_page_tail_foll(page, true);
+ else {
+ /*
+ * Getting a normal page or the head of a compound page
+ * requires to already have an elevated page->_count.
+ */
+ VM_BUG_ON(atomic_read(&page->_count) <= 0);
+ atomic_inc(&page->_count);
+ }
+}
+
extern unsigned long highest_memmap_pfn;
/*
diff --git a/mm/ksm.c b/mm/ksm.c
index 9a68b0c..310544a 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -1905,7 +1905,8 @@
oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX);
err = unmerge_and_remove_all_rmap_items();
- test_set_oom_score_adj(oom_score_adj);
+ compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX,
+ oom_score_adj);
if (err) {
ksm_run = KSM_RUN_STOP;
count = err;
diff --git a/mm/memblock.c b/mm/memblock.c
index ccbf973..84bec49 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -58,7 +58,8 @@
return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
}
-long __init_memblock memblock_overlaps_region(struct memblock_type *type, phys_addr_t base, phys_addr_t size)
+static long __init_memblock memblock_overlaps_region(struct memblock_type *type,
+ phys_addr_t base, phys_addr_t size)
{
unsigned long i;
@@ -267,7 +268,7 @@
return 0;
}
-extern int __init_memblock __weak memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1,
+int __init_memblock __weak memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1,
phys_addr_t addr2, phys_addr_t size2)
{
return 1;
@@ -626,6 +627,12 @@
return memblock.memory_size;
}
+/* lowest address */
+phys_addr_t __init_memblock memblock_start_of_DRAM(void)
+{
+ return memblock.memory.regions[0].base;
+}
+
phys_addr_t __init_memblock memblock_end_of_DRAM(void)
{
int idx = memblock.memory.cnt - 1;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 3508777..7af1d5e 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -201,8 +201,8 @@
struct eventfd_ctx *eventfd;
};
-static void mem_cgroup_threshold(struct mem_cgroup *mem);
-static void mem_cgroup_oom_notify(struct mem_cgroup *mem);
+static void mem_cgroup_threshold(struct mem_cgroup *memcg);
+static void mem_cgroup_oom_notify(struct mem_cgroup *memcg);
/*
* The memory controller data structure. The memory controller controls both
@@ -362,29 +362,29 @@
#define MEM_CGROUP_RECLAIM_SOFT_BIT 0x2
#define MEM_CGROUP_RECLAIM_SOFT (1 << MEM_CGROUP_RECLAIM_SOFT_BIT)
-static void mem_cgroup_get(struct mem_cgroup *mem);
-static void mem_cgroup_put(struct mem_cgroup *mem);
-static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
-static void drain_all_stock_async(struct mem_cgroup *mem);
+static void mem_cgroup_get(struct mem_cgroup *memcg);
+static void mem_cgroup_put(struct mem_cgroup *memcg);
+static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg);
+static void drain_all_stock_async(struct mem_cgroup *memcg);
static struct mem_cgroup_per_zone *
-mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
+mem_cgroup_zoneinfo(struct mem_cgroup *memcg, int nid, int zid)
{
- return &mem->info.nodeinfo[nid]->zoneinfo[zid];
+ return &memcg->info.nodeinfo[nid]->zoneinfo[zid];
}
-struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *mem)
+struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg)
{
- return &mem->css;
+ return &memcg->css;
}
static struct mem_cgroup_per_zone *
-page_cgroup_zoneinfo(struct mem_cgroup *mem, struct page *page)
+page_cgroup_zoneinfo(struct mem_cgroup *memcg, struct page *page)
{
int nid = page_to_nid(page);
int zid = page_zonenum(page);
- return mem_cgroup_zoneinfo(mem, nid, zid);
+ return mem_cgroup_zoneinfo(memcg, nid, zid);
}
static struct mem_cgroup_tree_per_zone *
@@ -403,7 +403,7 @@
}
static void
-__mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
+__mem_cgroup_insert_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz,
unsigned long long new_usage_in_excess)
@@ -437,7 +437,7 @@
}
static void
-__mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+__mem_cgroup_remove_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz)
{
@@ -448,17 +448,17 @@
}
static void
-mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+mem_cgroup_remove_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz)
{
spin_lock(&mctz->lock);
- __mem_cgroup_remove_exceeded(mem, mz, mctz);
+ __mem_cgroup_remove_exceeded(memcg, mz, mctz);
spin_unlock(&mctz->lock);
}
-static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
+static void mem_cgroup_update_tree(struct mem_cgroup *memcg, struct page *page)
{
unsigned long long excess;
struct mem_cgroup_per_zone *mz;
@@ -471,9 +471,9 @@
* Necessary to update all ancestors when hierarchy is used.
* because their event counter is not touched.
*/
- for (; mem; mem = parent_mem_cgroup(mem)) {
- mz = mem_cgroup_zoneinfo(mem, nid, zid);
- excess = res_counter_soft_limit_excess(&mem->res);
+ for (; memcg; memcg = parent_mem_cgroup(memcg)) {
+ mz = mem_cgroup_zoneinfo(memcg, nid, zid);
+ excess = res_counter_soft_limit_excess(&memcg->res);
/*
* We have to update the tree if mz is on RB-tree or
* mem is over its softlimit.
@@ -482,18 +482,18 @@
spin_lock(&mctz->lock);
/* if on-tree, remove it */
if (mz->on_tree)
- __mem_cgroup_remove_exceeded(mem, mz, mctz);
+ __mem_cgroup_remove_exceeded(memcg, mz, mctz);
/*
* Insert again. mz->usage_in_excess will be updated.
* If excess is 0, no tree ops.
*/
- __mem_cgroup_insert_exceeded(mem, mz, mctz, excess);
+ __mem_cgroup_insert_exceeded(memcg, mz, mctz, excess);
spin_unlock(&mctz->lock);
}
}
}
-static void mem_cgroup_remove_from_trees(struct mem_cgroup *mem)
+static void mem_cgroup_remove_from_trees(struct mem_cgroup *memcg)
{
int node, zone;
struct mem_cgroup_per_zone *mz;
@@ -501,9 +501,9 @@
for_each_node_state(node, N_POSSIBLE) {
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
- mz = mem_cgroup_zoneinfo(mem, node, zone);
+ mz = mem_cgroup_zoneinfo(memcg, node, zone);
mctz = soft_limit_tree_node_zone(node, zone);
- mem_cgroup_remove_exceeded(mem, mz, mctz);
+ mem_cgroup_remove_exceeded(memcg, mz, mctz);
}
}
}
@@ -564,7 +564,7 @@
* common workload, threashold and synchonization as vmstat[] should be
* implemented.
*/
-static long mem_cgroup_read_stat(struct mem_cgroup *mem,
+static long mem_cgroup_read_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
long val = 0;
@@ -572,81 +572,83 @@
get_online_cpus();
for_each_online_cpu(cpu)
- val += per_cpu(mem->stat->count[idx], cpu);
+ val += per_cpu(memcg->stat->count[idx], cpu);
#ifdef CONFIG_HOTPLUG_CPU
- spin_lock(&mem->pcp_counter_lock);
- val += mem->nocpu_base.count[idx];
- spin_unlock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
+ val += memcg->nocpu_base.count[idx];
+ spin_unlock(&memcg->pcp_counter_lock);
#endif
put_online_cpus();
return val;
}
-static void mem_cgroup_swap_statistics(struct mem_cgroup *mem,
+static void mem_cgroup_swap_statistics(struct mem_cgroup *memcg,
bool charge)
{
int val = (charge) ? 1 : -1;
- this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_SWAPOUT], val);
+ this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_SWAPOUT], val);
}
-void mem_cgroup_pgfault(struct mem_cgroup *mem, int val)
+void mem_cgroup_pgfault(struct mem_cgroup *memcg, int val)
{
- this_cpu_add(mem->stat->events[MEM_CGROUP_EVENTS_PGFAULT], val);
+ this_cpu_add(memcg->stat->events[MEM_CGROUP_EVENTS_PGFAULT], val);
}
-void mem_cgroup_pgmajfault(struct mem_cgroup *mem, int val)
+void mem_cgroup_pgmajfault(struct mem_cgroup *memcg, int val)
{
- this_cpu_add(mem->stat->events[MEM_CGROUP_EVENTS_PGMAJFAULT], val);
+ this_cpu_add(memcg->stat->events[MEM_CGROUP_EVENTS_PGMAJFAULT], val);
}
-static unsigned long mem_cgroup_read_events(struct mem_cgroup *mem,
+static unsigned long mem_cgroup_read_events(struct mem_cgroup *memcg,
enum mem_cgroup_events_index idx)
{
unsigned long val = 0;
int cpu;
for_each_online_cpu(cpu)
- val += per_cpu(mem->stat->events[idx], cpu);
+ val += per_cpu(memcg->stat->events[idx], cpu);
#ifdef CONFIG_HOTPLUG_CPU
- spin_lock(&mem->pcp_counter_lock);
- val += mem->nocpu_base.events[idx];
- spin_unlock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
+ val += memcg->nocpu_base.events[idx];
+ spin_unlock(&memcg->pcp_counter_lock);
#endif
return val;
}
-static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
+static void mem_cgroup_charge_statistics(struct mem_cgroup *memcg,
bool file, int nr_pages)
{
preempt_disable();
if (file)
- __this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_CACHE], nr_pages);
+ __this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_CACHE],
+ nr_pages);
else
- __this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_RSS], nr_pages);
+ __this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_RSS],
+ nr_pages);
/* pagein of a big page is an event. So, ignore page size */
if (nr_pages > 0)
- __this_cpu_inc(mem->stat->events[MEM_CGROUP_EVENTS_PGPGIN]);
+ __this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGPGIN]);
else {
- __this_cpu_inc(mem->stat->events[MEM_CGROUP_EVENTS_PGPGOUT]);
+ __this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGPGOUT]);
nr_pages = -nr_pages; /* for event */
}
- __this_cpu_add(mem->stat->events[MEM_CGROUP_EVENTS_COUNT], nr_pages);
+ __this_cpu_add(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT], nr_pages);
preempt_enable();
}
unsigned long
-mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *mem, int nid, int zid,
+mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg, int nid, int zid,
unsigned int lru_mask)
{
struct mem_cgroup_per_zone *mz;
enum lru_list l;
unsigned long ret = 0;
- mz = mem_cgroup_zoneinfo(mem, nid, zid);
+ mz = mem_cgroup_zoneinfo(memcg, nid, zid);
for_each_lru(l) {
if (BIT(l) & lru_mask)
@@ -656,44 +658,45 @@
}
static unsigned long
-mem_cgroup_node_nr_lru_pages(struct mem_cgroup *mem,
+mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg,
int nid, unsigned int lru_mask)
{
u64 total = 0;
int zid;
for (zid = 0; zid < MAX_NR_ZONES; zid++)
- total += mem_cgroup_zone_nr_lru_pages(mem, nid, zid, lru_mask);
+ total += mem_cgroup_zone_nr_lru_pages(memcg,
+ nid, zid, lru_mask);
return total;
}
-static unsigned long mem_cgroup_nr_lru_pages(struct mem_cgroup *mem,
+static unsigned long mem_cgroup_nr_lru_pages(struct mem_cgroup *memcg,
unsigned int lru_mask)
{
int nid;
u64 total = 0;
for_each_node_state(nid, N_HIGH_MEMORY)
- total += mem_cgroup_node_nr_lru_pages(mem, nid, lru_mask);
+ total += mem_cgroup_node_nr_lru_pages(memcg, nid, lru_mask);
return total;
}
-static bool __memcg_event_check(struct mem_cgroup *mem, int target)
+static bool __memcg_event_check(struct mem_cgroup *memcg, int target)
{
unsigned long val, next;
- val = this_cpu_read(mem->stat->events[MEM_CGROUP_EVENTS_COUNT]);
- next = this_cpu_read(mem->stat->targets[target]);
+ val = __this_cpu_read(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT]);
+ next = __this_cpu_read(memcg->stat->targets[target]);
/* from time_after() in jiffies.h */
return ((long)next - (long)val < 0);
}
-static void __mem_cgroup_target_update(struct mem_cgroup *mem, int target)
+static void __mem_cgroup_target_update(struct mem_cgroup *memcg, int target)
{
unsigned long val, next;
- val = this_cpu_read(mem->stat->events[MEM_CGROUP_EVENTS_COUNT]);
+ val = __this_cpu_read(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT]);
switch (target) {
case MEM_CGROUP_TARGET_THRESH:
@@ -709,34 +712,36 @@
return;
}
- this_cpu_write(mem->stat->targets[target], next);
+ __this_cpu_write(memcg->stat->targets[target], next);
}
/*
* Check events in order.
*
*/
-static void memcg_check_events(struct mem_cgroup *mem, struct page *page)
+static void memcg_check_events(struct mem_cgroup *memcg, struct page *page)
{
+ preempt_disable();
/* threshold event is triggered in finer grain than soft limit */
- if (unlikely(__memcg_event_check(mem, MEM_CGROUP_TARGET_THRESH))) {
- mem_cgroup_threshold(mem);
- __mem_cgroup_target_update(mem, MEM_CGROUP_TARGET_THRESH);
- if (unlikely(__memcg_event_check(mem,
+ if (unlikely(__memcg_event_check(memcg, MEM_CGROUP_TARGET_THRESH))) {
+ mem_cgroup_threshold(memcg);
+ __mem_cgroup_target_update(memcg, MEM_CGROUP_TARGET_THRESH);
+ if (unlikely(__memcg_event_check(memcg,
MEM_CGROUP_TARGET_SOFTLIMIT))) {
- mem_cgroup_update_tree(mem, page);
- __mem_cgroup_target_update(mem,
+ mem_cgroup_update_tree(memcg, page);
+ __mem_cgroup_target_update(memcg,
MEM_CGROUP_TARGET_SOFTLIMIT);
}
#if MAX_NUMNODES > 1
- if (unlikely(__memcg_event_check(mem,
+ if (unlikely(__memcg_event_check(memcg,
MEM_CGROUP_TARGET_NUMAINFO))) {
- atomic_inc(&mem->numainfo_events);
- __mem_cgroup_target_update(mem,
+ atomic_inc(&memcg->numainfo_events);
+ __mem_cgroup_target_update(memcg,
MEM_CGROUP_TARGET_NUMAINFO);
}
#endif
}
+ preempt_enable();
}
static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
@@ -762,7 +767,7 @@
struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
if (!mm)
return NULL;
@@ -773,25 +778,25 @@
*/
rcu_read_lock();
do {
- mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
- if (unlikely(!mem))
+ memcg = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!memcg))
break;
- } while (!css_tryget(&mem->css));
+ } while (!css_tryget(&memcg->css));
rcu_read_unlock();
- return mem;
+ return memcg;
}
/* The caller has to guarantee "mem" exists before calling this */
-static struct mem_cgroup *mem_cgroup_start_loop(struct mem_cgroup *mem)
+static struct mem_cgroup *mem_cgroup_start_loop(struct mem_cgroup *memcg)
{
struct cgroup_subsys_state *css;
int found;
- if (!mem) /* ROOT cgroup has the smallest ID */
+ if (!memcg) /* ROOT cgroup has the smallest ID */
return root_mem_cgroup; /*css_put/get against root is ignored*/
- if (!mem->use_hierarchy) {
- if (css_tryget(&mem->css))
- return mem;
+ if (!memcg->use_hierarchy) {
+ if (css_tryget(&memcg->css))
+ return memcg;
return NULL;
}
rcu_read_lock();
@@ -799,13 +804,13 @@
* searching a memory cgroup which has the smallest ID under given
* ROOT cgroup. (ID >= 1)
*/
- css = css_get_next(&mem_cgroup_subsys, 1, &mem->css, &found);
+ css = css_get_next(&mem_cgroup_subsys, 1, &memcg->css, &found);
if (css && css_tryget(css))
- mem = container_of(css, struct mem_cgroup, css);
+ memcg = container_of(css, struct mem_cgroup, css);
else
- mem = NULL;
+ memcg = NULL;
rcu_read_unlock();
- return mem;
+ return memcg;
}
static struct mem_cgroup *mem_cgroup_get_next(struct mem_cgroup *iter,
@@ -859,29 +864,29 @@
for_each_mem_cgroup_tree_cond(iter, NULL, true)
-static inline bool mem_cgroup_is_root(struct mem_cgroup *mem)
+static inline bool mem_cgroup_is_root(struct mem_cgroup *memcg)
{
- return (mem == root_mem_cgroup);
+ return (memcg == root_mem_cgroup);
}
void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
if (!mm)
return;
rcu_read_lock();
- mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
- if (unlikely(!mem))
+ memcg = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!memcg))
goto out;
switch (idx) {
case PGMAJFAULT:
- mem_cgroup_pgmajfault(mem, 1);
+ mem_cgroup_pgmajfault(memcg, 1);
break;
case PGFAULT:
- mem_cgroup_pgfault(mem, 1);
+ mem_cgroup_pgfault(memcg, 1);
break;
default:
BUG();
@@ -990,6 +995,16 @@
return;
pc = lookup_page_cgroup(page);
VM_BUG_ON(PageCgroupAcctLRU(pc));
+ /*
+ * putback: charge:
+ * SetPageLRU SetPageCgroupUsed
+ * smp_mb smp_mb
+ * PageCgroupUsed && add to memcg LRU PageLRU && add to memcg LRU
+ *
+ * Ensure that one of the two sides adds the page to the memcg
+ * LRU during a race.
+ */
+ smp_mb();
if (!PageCgroupUsed(pc))
return;
/* Ensure pc->mem_cgroup is visible after reading PCG_USED. */
@@ -1041,7 +1056,16 @@
unsigned long flags;
struct zone *zone = page_zone(page);
struct page_cgroup *pc = lookup_page_cgroup(page);
-
+ /*
+ * putback: charge:
+ * SetPageLRU SetPageCgroupUsed
+ * smp_mb smp_mb
+ * PageCgroupUsed && add to memcg LRU PageLRU && add to memcg LRU
+ *
+ * Ensure that one of the two sides adds the page to the memcg
+ * LRU during a race.
+ */
+ smp_mb();
/* taking care of that the page is added to LRU while we commit it */
if (likely(!PageLRU(page)))
return;
@@ -1063,21 +1087,21 @@
}
/*
- * Checks whether given mem is same or in the root_mem's
+ * Checks whether given mem is same or in the root_mem_cgroup's
* hierarchy subtree
*/
-static bool mem_cgroup_same_or_subtree(const struct mem_cgroup *root_mem,
- struct mem_cgroup *mem)
+static bool mem_cgroup_same_or_subtree(const struct mem_cgroup *root_memcg,
+ struct mem_cgroup *memcg)
{
- if (root_mem != mem) {
- return (root_mem->use_hierarchy &&
- css_is_ancestor(&mem->css, &root_mem->css));
+ if (root_memcg != memcg) {
+ return (root_memcg->use_hierarchy &&
+ css_is_ancestor(&memcg->css, &root_memcg->css));
}
return true;
}
-int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem)
+int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg)
{
int ret;
struct mem_cgroup *curr = NULL;
@@ -1091,25 +1115,29 @@
if (!curr)
return 0;
/*
- * We should check use_hierarchy of "mem" not "curr". Because checking
+ * We should check use_hierarchy of "memcg" not "curr". Because checking
* use_hierarchy of "curr" here make this function true if hierarchy is
- * enabled in "curr" and "curr" is a child of "mem" in *cgroup*
- * hierarchy(even if use_hierarchy is disabled in "mem").
+ * enabled in "curr" and "curr" is a child of "memcg" in *cgroup*
+ * hierarchy(even if use_hierarchy is disabled in "memcg").
*/
- ret = mem_cgroup_same_or_subtree(mem, curr);
+ ret = mem_cgroup_same_or_subtree(memcg, curr);
css_put(&curr->css);
return ret;
}
-static int calc_inactive_ratio(struct mem_cgroup *memcg, unsigned long *present_pages)
+int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
- unsigned long active;
- unsigned long inactive;
- unsigned long gb;
unsigned long inactive_ratio;
+ int nid = zone_to_nid(zone);
+ int zid = zone_idx(zone);
+ unsigned long inactive;
+ unsigned long active;
+ unsigned long gb;
- inactive = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_ANON));
- active = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_ANON));
+ inactive = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_INACTIVE_ANON));
+ active = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_ACTIVE_ANON));
gb = (inactive + active) >> (30 - PAGE_SHIFT);
if (gb)
@@ -1117,39 +1145,20 @@
else
inactive_ratio = 1;
- if (present_pages) {
- present_pages[0] = inactive;
- present_pages[1] = active;
- }
-
- return inactive_ratio;
+ return inactive * inactive_ratio < active;
}
-int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
unsigned long active;
unsigned long inactive;
- unsigned long present_pages[2];
- unsigned long inactive_ratio;
+ int zid = zone_idx(zone);
+ int nid = zone_to_nid(zone);
- inactive_ratio = calc_inactive_ratio(memcg, present_pages);
-
- inactive = present_pages[0];
- active = present_pages[1];
-
- if (inactive * inactive_ratio < active)
- return 1;
-
- return 0;
-}
-
-int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
-{
- unsigned long active;
- unsigned long inactive;
-
- inactive = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_FILE));
- active = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_FILE));
+ inactive = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_INACTIVE_FILE));
+ active = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_ACTIVE_FILE));
return (active > inactive);
}
@@ -1185,7 +1194,8 @@
unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
struct list_head *dst,
unsigned long *scanned, int order,
- int mode, struct zone *z,
+ isolate_mode_t mode,
+ struct zone *z,
struct mem_cgroup *mem_cont,
int active, int file)
{
@@ -1253,13 +1263,13 @@
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
*/
-static unsigned long mem_cgroup_margin(struct mem_cgroup *mem)
+static unsigned long mem_cgroup_margin(struct mem_cgroup *memcg)
{
unsigned long long margin;
- margin = res_counter_margin(&mem->res);
+ margin = res_counter_margin(&memcg->res);
if (do_swap_account)
- margin = min(margin, res_counter_margin(&mem->memsw));
+ margin = min(margin, res_counter_margin(&memcg->memsw));
return margin >> PAGE_SHIFT;
}
@@ -1274,33 +1284,33 @@
return memcg->swappiness;
}
-static void mem_cgroup_start_move(struct mem_cgroup *mem)
+static void mem_cgroup_start_move(struct mem_cgroup *memcg)
{
int cpu;
get_online_cpus();
- spin_lock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
for_each_online_cpu(cpu)
- per_cpu(mem->stat->count[MEM_CGROUP_ON_MOVE], cpu) += 1;
- mem->nocpu_base.count[MEM_CGROUP_ON_MOVE] += 1;
- spin_unlock(&mem->pcp_counter_lock);
+ per_cpu(memcg->stat->count[MEM_CGROUP_ON_MOVE], cpu) += 1;
+ memcg->nocpu_base.count[MEM_CGROUP_ON_MOVE] += 1;
+ spin_unlock(&memcg->pcp_counter_lock);
put_online_cpus();
synchronize_rcu();
}
-static void mem_cgroup_end_move(struct mem_cgroup *mem)
+static void mem_cgroup_end_move(struct mem_cgroup *memcg)
{
int cpu;
- if (!mem)
+ if (!memcg)
return;
get_online_cpus();
- spin_lock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
for_each_online_cpu(cpu)
- per_cpu(mem->stat->count[MEM_CGROUP_ON_MOVE], cpu) -= 1;
- mem->nocpu_base.count[MEM_CGROUP_ON_MOVE] -= 1;
- spin_unlock(&mem->pcp_counter_lock);
+ per_cpu(memcg->stat->count[MEM_CGROUP_ON_MOVE], cpu) -= 1;
+ memcg->nocpu_base.count[MEM_CGROUP_ON_MOVE] -= 1;
+ spin_unlock(&memcg->pcp_counter_lock);
put_online_cpus();
}
/*
@@ -1315,13 +1325,13 @@
* waiting at hith-memory prressure caused by "move".
*/
-static bool mem_cgroup_stealed(struct mem_cgroup *mem)
+static bool mem_cgroup_stealed(struct mem_cgroup *memcg)
{
VM_BUG_ON(!rcu_read_lock_held());
- return this_cpu_read(mem->stat->count[MEM_CGROUP_ON_MOVE]) > 0;
+ return this_cpu_read(memcg->stat->count[MEM_CGROUP_ON_MOVE]) > 0;
}
-static bool mem_cgroup_under_move(struct mem_cgroup *mem)
+static bool mem_cgroup_under_move(struct mem_cgroup *memcg)
{
struct mem_cgroup *from;
struct mem_cgroup *to;
@@ -1336,17 +1346,17 @@
if (!from)
goto unlock;
- ret = mem_cgroup_same_or_subtree(mem, from)
- || mem_cgroup_same_or_subtree(mem, to);
+ ret = mem_cgroup_same_or_subtree(memcg, from)
+ || mem_cgroup_same_or_subtree(memcg, to);
unlock:
spin_unlock(&mc.lock);
return ret;
}
-static bool mem_cgroup_wait_acct_move(struct mem_cgroup *mem)
+static bool mem_cgroup_wait_acct_move(struct mem_cgroup *memcg)
{
if (mc.moving_task && current != mc.moving_task) {
- if (mem_cgroup_under_move(mem)) {
+ if (mem_cgroup_under_move(memcg)) {
DEFINE_WAIT(wait);
prepare_to_wait(&mc.waitq, &wait, TASK_INTERRUPTIBLE);
/* moving charge context might have finished. */
@@ -1430,12 +1440,12 @@
* This function returns the number of memcg under hierarchy tree. Returns
* 1(self count) if no children.
*/
-static int mem_cgroup_count_children(struct mem_cgroup *mem)
+static int mem_cgroup_count_children(struct mem_cgroup *memcg)
{
int num = 0;
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
num++;
return num;
}
@@ -1465,21 +1475,21 @@
* that to reclaim free pages from.
*/
static struct mem_cgroup *
-mem_cgroup_select_victim(struct mem_cgroup *root_mem)
+mem_cgroup_select_victim(struct mem_cgroup *root_memcg)
{
struct mem_cgroup *ret = NULL;
struct cgroup_subsys_state *css;
int nextid, found;
- if (!root_mem->use_hierarchy) {
- css_get(&root_mem->css);
- ret = root_mem;
+ if (!root_memcg->use_hierarchy) {
+ css_get(&root_memcg->css);
+ ret = root_memcg;
}
while (!ret) {
rcu_read_lock();
- nextid = root_mem->last_scanned_child + 1;
- css = css_get_next(&mem_cgroup_subsys, nextid, &root_mem->css,
+ nextid = root_memcg->last_scanned_child + 1;
+ css = css_get_next(&mem_cgroup_subsys, nextid, &root_memcg->css,
&found);
if (css && css_tryget(css))
ret = container_of(css, struct mem_cgroup, css);
@@ -1488,9 +1498,9 @@
/* Updates scanning parameter */
if (!css) {
/* this means start scan from ID:1 */
- root_mem->last_scanned_child = 0;
+ root_memcg->last_scanned_child = 0;
} else
- root_mem->last_scanned_child = found;
+ root_memcg->last_scanned_child = found;
}
return ret;
@@ -1506,14 +1516,14 @@
* reclaimable pages on a node. Returns true if there are any reclaimable
* pages in the node.
*/
-static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *mem,
+static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *memcg,
int nid, bool noswap)
{
- if (mem_cgroup_node_nr_lru_pages(mem, nid, LRU_ALL_FILE))
+ if (mem_cgroup_node_nr_lru_pages(memcg, nid, LRU_ALL_FILE))
return true;
if (noswap || !total_swap_pages)
return false;
- if (mem_cgroup_node_nr_lru_pages(mem, nid, LRU_ALL_ANON))
+ if (mem_cgroup_node_nr_lru_pages(memcg, nid, LRU_ALL_ANON))
return true;
return false;
@@ -1526,29 +1536,29 @@
* nodes based on the zonelist. So update the list loosely once per 10 secs.
*
*/
-static void mem_cgroup_may_update_nodemask(struct mem_cgroup *mem)
+static void mem_cgroup_may_update_nodemask(struct mem_cgroup *memcg)
{
int nid;
/*
* numainfo_events > 0 means there was at least NUMAINFO_EVENTS_TARGET
* pagein/pageout changes since the last update.
*/
- if (!atomic_read(&mem->numainfo_events))
+ if (!atomic_read(&memcg->numainfo_events))
return;
- if (atomic_inc_return(&mem->numainfo_updating) > 1)
+ if (atomic_inc_return(&memcg->numainfo_updating) > 1)
return;
/* make a nodemask where this memcg uses memory from */
- mem->scan_nodes = node_states[N_HIGH_MEMORY];
+ memcg->scan_nodes = node_states[N_HIGH_MEMORY];
for_each_node_mask(nid, node_states[N_HIGH_MEMORY]) {
- if (!test_mem_cgroup_node_reclaimable(mem, nid, false))
- node_clear(nid, mem->scan_nodes);
+ if (!test_mem_cgroup_node_reclaimable(memcg, nid, false))
+ node_clear(nid, memcg->scan_nodes);
}
- atomic_set(&mem->numainfo_events, 0);
- atomic_set(&mem->numainfo_updating, 0);
+ atomic_set(&memcg->numainfo_events, 0);
+ atomic_set(&memcg->numainfo_updating, 0);
}
/*
@@ -1563,16 +1573,16 @@
*
* Now, we use round-robin. Better algorithm is welcomed.
*/
-int mem_cgroup_select_victim_node(struct mem_cgroup *mem)
+int mem_cgroup_select_victim_node(struct mem_cgroup *memcg)
{
int node;
- mem_cgroup_may_update_nodemask(mem);
- node = mem->last_scanned_node;
+ mem_cgroup_may_update_nodemask(memcg);
+ node = memcg->last_scanned_node;
- node = next_node(node, mem->scan_nodes);
+ node = next_node(node, memcg->scan_nodes);
if (node == MAX_NUMNODES)
- node = first_node(mem->scan_nodes);
+ node = first_node(memcg->scan_nodes);
/*
* We call this when we hit limit, not when pages are added to LRU.
* No LRU may hold pages because all pages are UNEVICTABLE or
@@ -1582,7 +1592,7 @@
if (unlikely(node == MAX_NUMNODES))
node = numa_node_id();
- mem->last_scanned_node = node;
+ memcg->last_scanned_node = node;
return node;
}
@@ -1592,7 +1602,7 @@
* unused nodes. But scan_nodes is lazily updated and may not cotain
* enough new information. We need to do double check.
*/
-bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap)
+bool mem_cgroup_reclaimable(struct mem_cgroup *memcg, bool noswap)
{
int nid;
@@ -1600,12 +1610,12 @@
* quick check...making use of scan_node.
* We can skip unused nodes.
*/
- if (!nodes_empty(mem->scan_nodes)) {
- for (nid = first_node(mem->scan_nodes);
+ if (!nodes_empty(memcg->scan_nodes)) {
+ for (nid = first_node(memcg->scan_nodes);
nid < MAX_NUMNODES;
- nid = next_node(nid, mem->scan_nodes)) {
+ nid = next_node(nid, memcg->scan_nodes)) {
- if (test_mem_cgroup_node_reclaimable(mem, nid, noswap))
+ if (test_mem_cgroup_node_reclaimable(memcg, nid, noswap))
return true;
}
}
@@ -1613,23 +1623,23 @@
* Check rest of nodes.
*/
for_each_node_state(nid, N_HIGH_MEMORY) {
- if (node_isset(nid, mem->scan_nodes))
+ if (node_isset(nid, memcg->scan_nodes))
continue;
- if (test_mem_cgroup_node_reclaimable(mem, nid, noswap))
+ if (test_mem_cgroup_node_reclaimable(memcg, nid, noswap))
return true;
}
return false;
}
#else
-int mem_cgroup_select_victim_node(struct mem_cgroup *mem)
+int mem_cgroup_select_victim_node(struct mem_cgroup *memcg)
{
return 0;
}
-bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap)
+bool mem_cgroup_reclaimable(struct mem_cgroup *memcg, bool noswap)
{
- return test_mem_cgroup_node_reclaimable(mem, 0, noswap);
+ return test_mem_cgroup_node_reclaimable(memcg, 0, noswap);
}
#endif
@@ -1638,14 +1648,14 @@
* we reclaimed from, so that we don't end up penalizing one child extensively
* based on its position in the children list.
*
- * root_mem is the original ancestor that we've been reclaim from.
+ * root_memcg is the original ancestor that we've been reclaim from.
*
- * We give up and return to the caller when we visit root_mem twice.
+ * We give up and return to the caller when we visit root_memcg twice.
* (other groups can be removed while we're walking....)
*
* If shrink==true, for avoiding to free too much, this returns immedieately.
*/
-static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
+static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_memcg,
struct zone *zone,
gfp_t gfp_mask,
unsigned long reclaim_options,
@@ -1660,15 +1670,15 @@
unsigned long excess;
unsigned long nr_scanned;
- excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
+ excess = res_counter_soft_limit_excess(&root_memcg->res) >> PAGE_SHIFT;
/* If memsw_is_minimum==1, swap-out is of-no-use. */
- if (!check_soft && !shrink && root_mem->memsw_is_minimum)
+ if (!check_soft && !shrink && root_memcg->memsw_is_minimum)
noswap = true;
while (1) {
- victim = mem_cgroup_select_victim(root_mem);
- if (victim == root_mem) {
+ victim = mem_cgroup_select_victim(root_memcg);
+ if (victim == root_memcg) {
loop++;
/*
* We are not draining per cpu cached charges during
@@ -1677,7 +1687,7 @@
* charges will not give any.
*/
if (!check_soft && loop >= 1)
- drain_all_stock_async(root_mem);
+ drain_all_stock_async(root_memcg);
if (loop >= 2) {
/*
* If we have not been able to reclaim
@@ -1724,9 +1734,9 @@
return ret;
total += ret;
if (check_soft) {
- if (!res_counter_soft_limit_excess(&root_mem->res))
+ if (!res_counter_soft_limit_excess(&root_memcg->res))
return total;
- } else if (mem_cgroup_margin(root_mem))
+ } else if (mem_cgroup_margin(root_memcg))
return total;
}
return total;
@@ -1737,12 +1747,12 @@
* If someone is running, return false.
* Has to be called with memcg_oom_lock
*/
-static bool mem_cgroup_oom_lock(struct mem_cgroup *mem)
+static bool mem_cgroup_oom_lock(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter, *failed = NULL;
bool cond = true;
- for_each_mem_cgroup_tree_cond(iter, mem, cond) {
+ for_each_mem_cgroup_tree_cond(iter, memcg, cond) {
if (iter->oom_lock) {
/*
* this subtree of our hierarchy is already locked
@@ -1762,7 +1772,7 @@
* what we set up to the failing subtree
*/
cond = true;
- for_each_mem_cgroup_tree_cond(iter, mem, cond) {
+ for_each_mem_cgroup_tree_cond(iter, memcg, cond) {
if (iter == failed) {
cond = false;
continue;
@@ -1775,24 +1785,24 @@
/*
* Has to be called with memcg_oom_lock
*/
-static int mem_cgroup_oom_unlock(struct mem_cgroup *mem)
+static int mem_cgroup_oom_unlock(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
iter->oom_lock = false;
return 0;
}
-static void mem_cgroup_mark_under_oom(struct mem_cgroup *mem)
+static void mem_cgroup_mark_under_oom(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
atomic_inc(&iter->under_oom);
}
-static void mem_cgroup_unmark_under_oom(struct mem_cgroup *mem)
+static void mem_cgroup_unmark_under_oom(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
@@ -1801,7 +1811,7 @@
* mem_cgroup_oom_lock() may not be called. We have to use
* atomic_add_unless() here.
*/
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
atomic_add_unless(&iter->under_oom, -1, 0);
}
@@ -1816,85 +1826,85 @@
static int memcg_oom_wake_function(wait_queue_t *wait,
unsigned mode, int sync, void *arg)
{
- struct mem_cgroup *wake_mem = (struct mem_cgroup *)arg,
- *oom_wait_mem;
+ struct mem_cgroup *wake_memcg = (struct mem_cgroup *)arg,
+ *oom_wait_memcg;
struct oom_wait_info *oom_wait_info;
oom_wait_info = container_of(wait, struct oom_wait_info, wait);
- oom_wait_mem = oom_wait_info->mem;
+ oom_wait_memcg = oom_wait_info->mem;
/*
* Both of oom_wait_info->mem and wake_mem are stable under us.
* Then we can use css_is_ancestor without taking care of RCU.
*/
- if (!mem_cgroup_same_or_subtree(oom_wait_mem, wake_mem)
- && !mem_cgroup_same_or_subtree(wake_mem, oom_wait_mem))
+ if (!mem_cgroup_same_or_subtree(oom_wait_memcg, wake_memcg)
+ && !mem_cgroup_same_or_subtree(wake_memcg, oom_wait_memcg))
return 0;
return autoremove_wake_function(wait, mode, sync, arg);
}
-static void memcg_wakeup_oom(struct mem_cgroup *mem)
+static void memcg_wakeup_oom(struct mem_cgroup *memcg)
{
- /* for filtering, pass "mem" as argument. */
- __wake_up(&memcg_oom_waitq, TASK_NORMAL, 0, mem);
+ /* for filtering, pass "memcg" as argument. */
+ __wake_up(&memcg_oom_waitq, TASK_NORMAL, 0, memcg);
}
-static void memcg_oom_recover(struct mem_cgroup *mem)
+static void memcg_oom_recover(struct mem_cgroup *memcg)
{
- if (mem && atomic_read(&mem->under_oom))
- memcg_wakeup_oom(mem);
+ if (memcg && atomic_read(&memcg->under_oom))
+ memcg_wakeup_oom(memcg);
}
/*
* try to call OOM killer. returns false if we should exit memory-reclaim loop.
*/
-bool mem_cgroup_handle_oom(struct mem_cgroup *mem, gfp_t mask)
+bool mem_cgroup_handle_oom(struct mem_cgroup *memcg, gfp_t mask)
{
struct oom_wait_info owait;
bool locked, need_to_kill;
- owait.mem = mem;
+ owait.mem = memcg;
owait.wait.flags = 0;
owait.wait.func = memcg_oom_wake_function;
owait.wait.private = current;
INIT_LIST_HEAD(&owait.wait.task_list);
need_to_kill = true;
- mem_cgroup_mark_under_oom(mem);
+ mem_cgroup_mark_under_oom(memcg);
- /* At first, try to OOM lock hierarchy under mem.*/
+ /* At first, try to OOM lock hierarchy under memcg.*/
spin_lock(&memcg_oom_lock);
- locked = mem_cgroup_oom_lock(mem);
+ locked = mem_cgroup_oom_lock(memcg);
/*
* Even if signal_pending(), we can't quit charge() loop without
* accounting. So, UNINTERRUPTIBLE is appropriate. But SIGKILL
* under OOM is always welcomed, use TASK_KILLABLE here.
*/
prepare_to_wait(&memcg_oom_waitq, &owait.wait, TASK_KILLABLE);
- if (!locked || mem->oom_kill_disable)
+ if (!locked || memcg->oom_kill_disable)
need_to_kill = false;
if (locked)
- mem_cgroup_oom_notify(mem);
+ mem_cgroup_oom_notify(memcg);
spin_unlock(&memcg_oom_lock);
if (need_to_kill) {
finish_wait(&memcg_oom_waitq, &owait.wait);
- mem_cgroup_out_of_memory(mem, mask);
+ mem_cgroup_out_of_memory(memcg, mask);
} else {
schedule();
finish_wait(&memcg_oom_waitq, &owait.wait);
}
spin_lock(&memcg_oom_lock);
if (locked)
- mem_cgroup_oom_unlock(mem);
- memcg_wakeup_oom(mem);
+ mem_cgroup_oom_unlock(memcg);
+ memcg_wakeup_oom(memcg);
spin_unlock(&memcg_oom_lock);
- mem_cgroup_unmark_under_oom(mem);
+ mem_cgroup_unmark_under_oom(memcg);
if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
return false;
/* Give chance to dying process */
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
return true;
}
@@ -1925,7 +1935,7 @@
void mem_cgroup_update_page_stat(struct page *page,
enum mem_cgroup_page_stat_item idx, int val)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
struct page_cgroup *pc = lookup_page_cgroup(page);
bool need_unlock = false;
unsigned long uninitialized_var(flags);
@@ -1934,16 +1944,16 @@
return;
rcu_read_lock();
- mem = pc->mem_cgroup;
- if (unlikely(!mem || !PageCgroupUsed(pc)))
+ memcg = pc->mem_cgroup;
+ if (unlikely(!memcg || !PageCgroupUsed(pc)))
goto out;
/* pc->mem_cgroup is unstable ? */
- if (unlikely(mem_cgroup_stealed(mem)) || PageTransHuge(page)) {
+ if (unlikely(mem_cgroup_stealed(memcg)) || PageTransHuge(page)) {
/* take a lock against to access pc->mem_cgroup */
move_lock_page_cgroup(pc, &flags);
need_unlock = true;
- mem = pc->mem_cgroup;
- if (!mem || !PageCgroupUsed(pc))
+ memcg = pc->mem_cgroup;
+ if (!memcg || !PageCgroupUsed(pc))
goto out;
}
@@ -1959,7 +1969,7 @@
BUG();
}
- this_cpu_add(mem->stat->count[idx], val);
+ this_cpu_add(memcg->stat->count[idx], val);
out:
if (unlikely(need_unlock))
@@ -1990,13 +2000,13 @@
* cgroup which is not current target, returns false. This stock will be
* refilled.
*/
-static bool consume_stock(struct mem_cgroup *mem)
+static bool consume_stock(struct mem_cgroup *memcg)
{
struct memcg_stock_pcp *stock;
bool ret = true;
stock = &get_cpu_var(memcg_stock);
- if (mem == stock->cached && stock->nr_pages)
+ if (memcg == stock->cached && stock->nr_pages)
stock->nr_pages--;
else /* need to call res_counter_charge */
ret = false;
@@ -2037,24 +2047,24 @@
* Cache charges(val) which is from res_counter, to local per_cpu area.
* This will be consumed by consume_stock() function, later.
*/
-static void refill_stock(struct mem_cgroup *mem, unsigned int nr_pages)
+static void refill_stock(struct mem_cgroup *memcg, unsigned int nr_pages)
{
struct memcg_stock_pcp *stock = &get_cpu_var(memcg_stock);
- if (stock->cached != mem) { /* reset if necessary */
+ if (stock->cached != memcg) { /* reset if necessary */
drain_stock(stock);
- stock->cached = mem;
+ stock->cached = memcg;
}
stock->nr_pages += nr_pages;
put_cpu_var(memcg_stock);
}
/*
- * Drains all per-CPU charge caches for given root_mem resp. subtree
+ * Drains all per-CPU charge caches for given root_memcg resp. subtree
* of the hierarchy under it. sync flag says whether we should block
* until the work is done.
*/
-static void drain_all_stock(struct mem_cgroup *root_mem, bool sync)
+static void drain_all_stock(struct mem_cgroup *root_memcg, bool sync)
{
int cpu, curcpu;
@@ -2063,12 +2073,12 @@
curcpu = get_cpu();
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
- mem = stock->cached;
- if (!mem || !stock->nr_pages)
+ memcg = stock->cached;
+ if (!memcg || !stock->nr_pages)
continue;
- if (!mem_cgroup_same_or_subtree(root_mem, mem))
+ if (!mem_cgroup_same_or_subtree(root_memcg, memcg))
continue;
if (!test_and_set_bit(FLUSHING_CACHED_CHARGE, &stock->flags)) {
if (cpu == curcpu)
@@ -2097,23 +2107,23 @@
* expects some charges will be back to res_counter later but cannot wait for
* it.
*/
-static void drain_all_stock_async(struct mem_cgroup *root_mem)
+static void drain_all_stock_async(struct mem_cgroup *root_memcg)
{
/*
* If someone calls draining, avoid adding more kworker runs.
*/
if (!mutex_trylock(&percpu_charge_mutex))
return;
- drain_all_stock(root_mem, false);
+ drain_all_stock(root_memcg, false);
mutex_unlock(&percpu_charge_mutex);
}
/* This is a synchronous drain interface. */
-static void drain_all_stock_sync(struct mem_cgroup *root_mem)
+static void drain_all_stock_sync(struct mem_cgroup *root_memcg)
{
/* called when force_empty is called */
mutex_lock(&percpu_charge_mutex);
- drain_all_stock(root_mem, true);
+ drain_all_stock(root_memcg, true);
mutex_unlock(&percpu_charge_mutex);
}
@@ -2121,35 +2131,35 @@
* This function drains percpu counter value from DEAD cpu and
* move it to local cpu. Note that this function can be preempted.
*/
-static void mem_cgroup_drain_pcp_counter(struct mem_cgroup *mem, int cpu)
+static void mem_cgroup_drain_pcp_counter(struct mem_cgroup *memcg, int cpu)
{
int i;
- spin_lock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
for (i = 0; i < MEM_CGROUP_STAT_DATA; i++) {
- long x = per_cpu(mem->stat->count[i], cpu);
+ long x = per_cpu(memcg->stat->count[i], cpu);
- per_cpu(mem->stat->count[i], cpu) = 0;
- mem->nocpu_base.count[i] += x;
+ per_cpu(memcg->stat->count[i], cpu) = 0;
+ memcg->nocpu_base.count[i] += x;
}
for (i = 0; i < MEM_CGROUP_EVENTS_NSTATS; i++) {
- unsigned long x = per_cpu(mem->stat->events[i], cpu);
+ unsigned long x = per_cpu(memcg->stat->events[i], cpu);
- per_cpu(mem->stat->events[i], cpu) = 0;
- mem->nocpu_base.events[i] += x;
+ per_cpu(memcg->stat->events[i], cpu) = 0;
+ memcg->nocpu_base.events[i] += x;
}
/* need to clear ON_MOVE value, works as a kind of lock. */
- per_cpu(mem->stat->count[MEM_CGROUP_ON_MOVE], cpu) = 0;
- spin_unlock(&mem->pcp_counter_lock);
+ per_cpu(memcg->stat->count[MEM_CGROUP_ON_MOVE], cpu) = 0;
+ spin_unlock(&memcg->pcp_counter_lock);
}
-static void synchronize_mem_cgroup_on_move(struct mem_cgroup *mem, int cpu)
+static void synchronize_mem_cgroup_on_move(struct mem_cgroup *memcg, int cpu)
{
int idx = MEM_CGROUP_ON_MOVE;
- spin_lock(&mem->pcp_counter_lock);
- per_cpu(mem->stat->count[idx], cpu) = mem->nocpu_base.count[idx];
- spin_unlock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
+ per_cpu(memcg->stat->count[idx], cpu) = memcg->nocpu_base.count[idx];
+ spin_unlock(&memcg->pcp_counter_lock);
}
static int __cpuinit memcg_cpu_hotplug_callback(struct notifier_block *nb,
@@ -2187,7 +2197,7 @@
CHARGE_OOM_DIE, /* the current is killed because of OOM */
};
-static int mem_cgroup_do_charge(struct mem_cgroup *mem, gfp_t gfp_mask,
+static int mem_cgroup_do_charge(struct mem_cgroup *memcg, gfp_t gfp_mask,
unsigned int nr_pages, bool oom_check)
{
unsigned long csize = nr_pages * PAGE_SIZE;
@@ -2196,16 +2206,16 @@
unsigned long flags = 0;
int ret;
- ret = res_counter_charge(&mem->res, csize, &fail_res);
+ ret = res_counter_charge(&memcg->res, csize, &fail_res);
if (likely(!ret)) {
if (!do_swap_account)
return CHARGE_OK;
- ret = res_counter_charge(&mem->memsw, csize, &fail_res);
+ ret = res_counter_charge(&memcg->memsw, csize, &fail_res);
if (likely(!ret))
return CHARGE_OK;
- res_counter_uncharge(&mem->res, csize);
+ res_counter_uncharge(&memcg->res, csize);
mem_over_limit = mem_cgroup_from_res_counter(fail_res, memsw);
flags |= MEM_CGROUP_RECLAIM_NOSWAP;
} else
@@ -2263,12 +2273,12 @@
static int __mem_cgroup_try_charge(struct mm_struct *mm,
gfp_t gfp_mask,
unsigned int nr_pages,
- struct mem_cgroup **memcg,
+ struct mem_cgroup **ptr,
bool oom)
{
unsigned int batch = max(CHARGE_BATCH, nr_pages);
int nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
int ret;
/*
@@ -2286,17 +2296,17 @@
* thread group leader migrates. It's possible that mm is not
* set, if so charge the init_mm (happens for pagecache usage).
*/
- if (!*memcg && !mm)
+ if (!*ptr && !mm)
goto bypass;
again:
- if (*memcg) { /* css should be a valid one */
- mem = *memcg;
- VM_BUG_ON(css_is_removed(&mem->css));
- if (mem_cgroup_is_root(mem))
+ if (*ptr) { /* css should be a valid one */
+ memcg = *ptr;
+ VM_BUG_ON(css_is_removed(&memcg->css));
+ if (mem_cgroup_is_root(memcg))
goto done;
- if (nr_pages == 1 && consume_stock(mem))
+ if (nr_pages == 1 && consume_stock(memcg))
goto done;
- css_get(&mem->css);
+ css_get(&memcg->css);
} else {
struct task_struct *p;
@@ -2304,7 +2314,7 @@
p = rcu_dereference(mm->owner);
/*
* Because we don't have task_lock(), "p" can exit.
- * In that case, "mem" can point to root or p can be NULL with
+ * In that case, "memcg" can point to root or p can be NULL with
* race with swapoff. Then, we have small risk of mis-accouning.
* But such kind of mis-account by race always happens because
* we don't have cgroup_mutex(). It's overkill and we allo that
@@ -2312,12 +2322,12 @@
* (*) swapoff at el will charge against mm-struct not against
* task-struct. So, mm->owner can be NULL.
*/
- mem = mem_cgroup_from_task(p);
- if (!mem || mem_cgroup_is_root(mem)) {
+ memcg = mem_cgroup_from_task(p);
+ if (!memcg || mem_cgroup_is_root(memcg)) {
rcu_read_unlock();
goto done;
}
- if (nr_pages == 1 && consume_stock(mem)) {
+ if (nr_pages == 1 && consume_stock(memcg)) {
/*
* It seems dagerous to access memcg without css_get().
* But considering how consume_stok works, it's not
@@ -2330,7 +2340,7 @@
goto done;
}
/* after here, we may be blocked. we need to get refcnt */
- if (!css_tryget(&mem->css)) {
+ if (!css_tryget(&memcg->css)) {
rcu_read_unlock();
goto again;
}
@@ -2342,7 +2352,7 @@
/* If killed, bypass charge */
if (fatal_signal_pending(current)) {
- css_put(&mem->css);
+ css_put(&memcg->css);
goto bypass;
}
@@ -2352,43 +2362,43 @@
nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
}
- ret = mem_cgroup_do_charge(mem, gfp_mask, batch, oom_check);
+ ret = mem_cgroup_do_charge(memcg, gfp_mask, batch, oom_check);
switch (ret) {
case CHARGE_OK:
break;
case CHARGE_RETRY: /* not in OOM situation but retry */
batch = nr_pages;
- css_put(&mem->css);
- mem = NULL;
+ css_put(&memcg->css);
+ memcg = NULL;
goto again;
case CHARGE_WOULDBLOCK: /* !__GFP_WAIT */
- css_put(&mem->css);
+ css_put(&memcg->css);
goto nomem;
case CHARGE_NOMEM: /* OOM routine works */
if (!oom) {
- css_put(&mem->css);
+ css_put(&memcg->css);
goto nomem;
}
/* If oom, we never return -ENOMEM */
nr_oom_retries--;
break;
case CHARGE_OOM_DIE: /* Killed by OOM Killer */
- css_put(&mem->css);
+ css_put(&memcg->css);
goto bypass;
}
} while (ret != CHARGE_OK);
if (batch > nr_pages)
- refill_stock(mem, batch - nr_pages);
- css_put(&mem->css);
+ refill_stock(memcg, batch - nr_pages);
+ css_put(&memcg->css);
done:
- *memcg = mem;
+ *ptr = memcg;
return 0;
nomem:
- *memcg = NULL;
+ *ptr = NULL;
return -ENOMEM;
bypass:
- *memcg = NULL;
+ *ptr = NULL;
return 0;
}
@@ -2397,15 +2407,15 @@
* This function is for that and do uncharge, put css's refcnt.
* gotten by try_charge().
*/
-static void __mem_cgroup_cancel_charge(struct mem_cgroup *mem,
+static void __mem_cgroup_cancel_charge(struct mem_cgroup *memcg,
unsigned int nr_pages)
{
- if (!mem_cgroup_is_root(mem)) {
+ if (!mem_cgroup_is_root(memcg)) {
unsigned long bytes = nr_pages * PAGE_SIZE;
- res_counter_uncharge(&mem->res, bytes);
+ res_counter_uncharge(&memcg->res, bytes);
if (do_swap_account)
- res_counter_uncharge(&mem->memsw, bytes);
+ res_counter_uncharge(&memcg->memsw, bytes);
}
}
@@ -2430,7 +2440,7 @@
struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
struct page_cgroup *pc;
unsigned short id;
swp_entry_t ent;
@@ -2440,23 +2450,23 @@
pc = lookup_page_cgroup(page);
lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
- mem = pc->mem_cgroup;
- if (mem && !css_tryget(&mem->css))
- mem = NULL;
+ memcg = pc->mem_cgroup;
+ if (memcg && !css_tryget(&memcg->css))
+ memcg = NULL;
} else if (PageSwapCache(page)) {
ent.val = page_private(page);
id = lookup_swap_cgroup(ent);
rcu_read_lock();
- mem = mem_cgroup_lookup(id);
- if (mem && !css_tryget(&mem->css))
- mem = NULL;
+ memcg = mem_cgroup_lookup(id);
+ if (memcg && !css_tryget(&memcg->css))
+ memcg = NULL;
rcu_read_unlock();
}
unlock_page_cgroup(pc);
- return mem;
+ return memcg;
}
-static void __mem_cgroup_commit_charge(struct mem_cgroup *mem,
+static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg,
struct page *page,
unsigned int nr_pages,
struct page_cgroup *pc,
@@ -2465,14 +2475,14 @@
lock_page_cgroup(pc);
if (unlikely(PageCgroupUsed(pc))) {
unlock_page_cgroup(pc);
- __mem_cgroup_cancel_charge(mem, nr_pages);
+ __mem_cgroup_cancel_charge(memcg, nr_pages);
return;
}
/*
* we don't need page_cgroup_lock about tail pages, becase they are not
* accessed by any other context at this point.
*/
- pc->mem_cgroup = mem;
+ pc->mem_cgroup = memcg;
/*
* We access a page_cgroup asynchronously without lock_page_cgroup().
* Especially when a page_cgroup is taken from a page, pc->mem_cgroup
@@ -2495,14 +2505,14 @@
break;
}
- mem_cgroup_charge_statistics(mem, PageCgroupCache(pc), nr_pages);
+ mem_cgroup_charge_statistics(memcg, PageCgroupCache(pc), nr_pages);
unlock_page_cgroup(pc);
/*
* "charge_statistics" updated event counter. Then, check it.
* Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
* if they exceeds softlimit.
*/
- memcg_check_events(mem, page);
+ memcg_check_events(memcg, page);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -2689,7 +2699,7 @@
static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask, enum charge_type ctype)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
unsigned int nr_pages = 1;
struct page_cgroup *pc;
bool oom = true;
@@ -2708,11 +2718,11 @@
pc = lookup_page_cgroup(page);
BUG_ON(!pc); /* XXX: remove this and move pc lookup into commit */
- ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &mem, oom);
- if (ret || !mem)
+ ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom);
+ if (ret || !memcg)
return ret;
- __mem_cgroup_commit_charge(mem, page, nr_pages, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype);
return 0;
}
@@ -2741,7 +2751,7 @@
enum charge_type ctype);
static void
-__mem_cgroup_commit_charge_lrucare(struct page *page, struct mem_cgroup *mem,
+__mem_cgroup_commit_charge_lrucare(struct page *page, struct mem_cgroup *memcg,
enum charge_type ctype)
{
struct page_cgroup *pc = lookup_page_cgroup(page);
@@ -2751,7 +2761,7 @@
* LRU. Take care of it.
*/
mem_cgroup_lru_del_before_commit(page);
- __mem_cgroup_commit_charge(mem, page, 1, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype);
mem_cgroup_lru_add_after_commit(page);
return;
}
@@ -2759,7 +2769,7 @@
int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
int ret;
if (mem_cgroup_disabled())
@@ -2771,8 +2781,8 @@
mm = &init_mm;
if (page_is_file_cache(page)) {
- ret = __mem_cgroup_try_charge(mm, gfp_mask, 1, &mem, true);
- if (ret || !mem)
+ ret = __mem_cgroup_try_charge(mm, gfp_mask, 1, &memcg, true);
+ if (ret || !memcg)
return ret;
/*
@@ -2780,15 +2790,15 @@
* put that would remove them from the LRU list, make
* sure that they get relinked properly.
*/
- __mem_cgroup_commit_charge_lrucare(page, mem,
+ __mem_cgroup_commit_charge_lrucare(page, memcg,
MEM_CGROUP_CHARGE_TYPE_CACHE);
return ret;
}
/* shmem */
if (PageSwapCache(page)) {
- ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
+ ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &memcg);
if (!ret)
- __mem_cgroup_commit_charge_swapin(page, mem,
+ __mem_cgroup_commit_charge_swapin(page, memcg,
MEM_CGROUP_CHARGE_TYPE_SHMEM);
} else
ret = mem_cgroup_charge_common(page, mm, gfp_mask,
@@ -2807,7 +2817,7 @@
struct page *page,
gfp_t mask, struct mem_cgroup **ptr)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
int ret;
*ptr = NULL;
@@ -2825,12 +2835,12 @@
*/
if (!PageSwapCache(page))
goto charge_cur_mm;
- mem = try_get_mem_cgroup_from_page(page);
- if (!mem)
+ memcg = try_get_mem_cgroup_from_page(page);
+ if (!memcg)
goto charge_cur_mm;
- *ptr = mem;
+ *ptr = memcg;
ret = __mem_cgroup_try_charge(NULL, mask, 1, ptr, true);
- css_put(&mem->css);
+ css_put(&memcg->css);
return ret;
charge_cur_mm:
if (unlikely(!mm))
@@ -2890,16 +2900,16 @@
MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
-void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *mem)
+void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *memcg)
{
if (mem_cgroup_disabled())
return;
- if (!mem)
+ if (!memcg)
return;
- __mem_cgroup_cancel_charge(mem, 1);
+ __mem_cgroup_cancel_charge(memcg, 1);
}
-static void mem_cgroup_do_uncharge(struct mem_cgroup *mem,
+static void mem_cgroup_do_uncharge(struct mem_cgroup *memcg,
unsigned int nr_pages,
const enum charge_type ctype)
{
@@ -2917,7 +2927,7 @@
* uncharges. Then, it's ok to ignore memcg's refcnt.
*/
if (!batch->memcg)
- batch->memcg = mem;
+ batch->memcg = memcg;
/*
* do_batch > 0 when unmapping pages or inode invalidate/truncate.
* In those cases, all pages freed continuously can be expected to be in
@@ -2937,7 +2947,7 @@
* merge a series of uncharges to an uncharge of res_counter.
* If not, we uncharge res_counter ony by one.
*/
- if (batch->memcg != mem)
+ if (batch->memcg != memcg)
goto direct_uncharge;
/* remember freed charge and uncharge it later */
batch->nr_pages++;
@@ -2945,11 +2955,11 @@
batch->memsw_nr_pages++;
return;
direct_uncharge:
- res_counter_uncharge(&mem->res, nr_pages * PAGE_SIZE);
+ res_counter_uncharge(&memcg->res, nr_pages * PAGE_SIZE);
if (uncharge_memsw)
- res_counter_uncharge(&mem->memsw, nr_pages * PAGE_SIZE);
- if (unlikely(batch->memcg != mem))
- memcg_oom_recover(mem);
+ res_counter_uncharge(&memcg->memsw, nr_pages * PAGE_SIZE);
+ if (unlikely(batch->memcg != memcg))
+ memcg_oom_recover(memcg);
return;
}
@@ -2959,7 +2969,7 @@
static struct mem_cgroup *
__mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
unsigned int nr_pages = 1;
struct page_cgroup *pc;
@@ -2982,7 +2992,7 @@
lock_page_cgroup(pc);
- mem = pc->mem_cgroup;
+ memcg = pc->mem_cgroup;
if (!PageCgroupUsed(pc))
goto unlock_out;
@@ -3005,7 +3015,7 @@
break;
}
- mem_cgroup_charge_statistics(mem, PageCgroupCache(pc), -nr_pages);
+ mem_cgroup_charge_statistics(memcg, PageCgroupCache(pc), -nr_pages);
ClearPageCgroupUsed(pc);
/*
@@ -3017,18 +3027,18 @@
unlock_page_cgroup(pc);
/*
- * even after unlock, we have mem->res.usage here and this memcg
+ * even after unlock, we have memcg->res.usage here and this memcg
* will never be freed.
*/
- memcg_check_events(mem, page);
+ memcg_check_events(memcg, page);
if (do_swap_account && ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT) {
- mem_cgroup_swap_statistics(mem, true);
- mem_cgroup_get(mem);
+ mem_cgroup_swap_statistics(memcg, true);
+ mem_cgroup_get(memcg);
}
- if (!mem_cgroup_is_root(mem))
- mem_cgroup_do_uncharge(mem, nr_pages, ctype);
+ if (!mem_cgroup_is_root(memcg))
+ mem_cgroup_do_uncharge(memcg, nr_pages, ctype);
- return mem;
+ return memcg;
unlock_out:
unlock_page_cgroup(pc);
@@ -3218,7 +3228,7 @@
int mem_cgroup_prepare_migration(struct page *page,
struct page *newpage, struct mem_cgroup **ptr, gfp_t gfp_mask)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
struct page_cgroup *pc;
enum charge_type ctype;
int ret = 0;
@@ -3232,8 +3242,8 @@
pc = lookup_page_cgroup(page);
lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
- mem = pc->mem_cgroup;
- css_get(&mem->css);
+ memcg = pc->mem_cgroup;
+ css_get(&memcg->css);
/*
* At migrating an anonymous page, its mapcount goes down
* to 0 and uncharge() will be called. But, even if it's fully
@@ -3271,12 +3281,12 @@
* If the page is not charged at this point,
* we return here.
*/
- if (!mem)
+ if (!memcg)
return 0;
- *ptr = mem;
+ *ptr = memcg;
ret = __mem_cgroup_try_charge(NULL, gfp_mask, 1, ptr, false);
- css_put(&mem->css);/* drop extra refcnt */
+ css_put(&memcg->css);/* drop extra refcnt */
if (ret || *ptr == NULL) {
if (PageAnon(page)) {
lock_page_cgroup(pc);
@@ -3302,21 +3312,21 @@
ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
else
ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
- __mem_cgroup_commit_charge(mem, page, 1, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype);
return ret;
}
/* remove redundant charge if migration failed*/
-void mem_cgroup_end_migration(struct mem_cgroup *mem,
+void mem_cgroup_end_migration(struct mem_cgroup *memcg,
struct page *oldpage, struct page *newpage, bool migration_ok)
{
struct page *used, *unused;
struct page_cgroup *pc;
- if (!mem)
+ if (!memcg)
return;
/* blocks rmdir() */
- cgroup_exclude_rmdir(&mem->css);
+ cgroup_exclude_rmdir(&memcg->css);
if (!migration_ok) {
used = oldpage;
unused = newpage;
@@ -3352,7 +3362,7 @@
* So, rmdir()->pre_destroy() can be called while we do this charge.
* In that case, we need to call pre_destroy() again. check it here.
*/
- cgroup_release_and_wakeup_rmdir(&mem->css);
+ cgroup_release_and_wakeup_rmdir(&memcg->css);
}
#ifdef CONFIG_DEBUG_VM
@@ -3431,7 +3441,7 @@
/*
* Rather than hide all in some function, I do this in
* open coded manner. You see what this really does.
- * We have to guarantee mem->res.limit < mem->memsw.limit.
+ * We have to guarantee memcg->res.limit < memcg->memsw.limit.
*/
mutex_lock(&set_limit_mutex);
memswlimit = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
@@ -3493,7 +3503,7 @@
/*
* Rather than hide all in some function, I do this in
* open coded manner. You see what this really does.
- * We have to guarantee mem->res.limit < mem->memsw.limit.
+ * We have to guarantee memcg->res.limit < memcg->memsw.limit.
*/
mutex_lock(&set_limit_mutex);
memlimit = res_counter_read_u64(&memcg->res, RES_LIMIT);
@@ -3631,7 +3641,7 @@
* This routine traverse page_cgroup in given list and drop them all.
* *And* this routine doesn't reclaim page itself, just removes page_cgroup.
*/
-static int mem_cgroup_force_empty_list(struct mem_cgroup *mem,
+static int mem_cgroup_force_empty_list(struct mem_cgroup *memcg,
int node, int zid, enum lru_list lru)
{
struct zone *zone;
@@ -3642,7 +3652,7 @@
int ret = 0;
zone = &NODE_DATA(node)->node_zones[zid];
- mz = mem_cgroup_zoneinfo(mem, node, zid);
+ mz = mem_cgroup_zoneinfo(memcg, node, zid);
list = &mz->lists[lru];
loop = MEM_CGROUP_ZSTAT(mz, lru);
@@ -3669,7 +3679,7 @@
page = lookup_cgroup_page(pc);
- ret = mem_cgroup_move_parent(page, pc, mem, GFP_KERNEL);
+ ret = mem_cgroup_move_parent(page, pc, memcg, GFP_KERNEL);
if (ret == -ENOMEM)
break;
@@ -3690,14 +3700,14 @@
* make mem_cgroup's charge to be 0 if there is no task.
* This enables deleting this mem_cgroup.
*/
-static int mem_cgroup_force_empty(struct mem_cgroup *mem, bool free_all)
+static int mem_cgroup_force_empty(struct mem_cgroup *memcg, bool free_all)
{
int ret;
int node, zid, shrink;
int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
- struct cgroup *cgrp = mem->css.cgroup;
+ struct cgroup *cgrp = memcg->css.cgroup;
- css_get(&mem->css);
+ css_get(&memcg->css);
shrink = 0;
/* should free all ? */
@@ -3713,14 +3723,14 @@
goto out;
/* This is for making all *used* pages to be on LRU. */
lru_add_drain_all();
- drain_all_stock_sync(mem);
+ drain_all_stock_sync(memcg);
ret = 0;
- mem_cgroup_start_move(mem);
+ mem_cgroup_start_move(memcg);
for_each_node_state(node, N_HIGH_MEMORY) {
for (zid = 0; !ret && zid < MAX_NR_ZONES; zid++) {
enum lru_list l;
for_each_lru(l) {
- ret = mem_cgroup_force_empty_list(mem,
+ ret = mem_cgroup_force_empty_list(memcg,
node, zid, l);
if (ret)
break;
@@ -3729,16 +3739,16 @@
if (ret)
break;
}
- mem_cgroup_end_move(mem);
- memcg_oom_recover(mem);
+ mem_cgroup_end_move(memcg);
+ memcg_oom_recover(memcg);
/* it seems parent cgroup doesn't have enough mem */
if (ret == -ENOMEM)
goto try_to_free;
cond_resched();
/* "ret" should also be checked to ensure all lists are empty. */
- } while (mem->res.usage > 0 || ret);
+ } while (memcg->res.usage > 0 || ret);
out:
- css_put(&mem->css);
+ css_put(&memcg->css);
return ret;
try_to_free:
@@ -3751,14 +3761,14 @@
lru_add_drain_all();
/* try to free all pages in this cgroup */
shrink = 1;
- while (nr_retries && mem->res.usage > 0) {
+ while (nr_retries && memcg->res.usage > 0) {
int progress;
if (signal_pending(current)) {
ret = -EINTR;
goto out;
}
- progress = try_to_free_mem_cgroup_pages(mem, GFP_KERNEL,
+ progress = try_to_free_mem_cgroup_pages(memcg, GFP_KERNEL,
false);
if (!progress) {
nr_retries--;
@@ -3787,12 +3797,12 @@
u64 val)
{
int retval = 0;
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
struct cgroup *parent = cont->parent;
- struct mem_cgroup *parent_mem = NULL;
+ struct mem_cgroup *parent_memcg = NULL;
if (parent)
- parent_mem = mem_cgroup_from_cont(parent);
+ parent_memcg = mem_cgroup_from_cont(parent);
cgroup_lock();
/*
@@ -3803,10 +3813,10 @@
* For the root cgroup, parent_mem is NULL, we allow value to be
* set if there are no children.
*/
- if ((!parent_mem || !parent_mem->use_hierarchy) &&
+ if ((!parent_memcg || !parent_memcg->use_hierarchy) &&
(val == 1 || val == 0)) {
if (list_empty(&cont->children))
- mem->use_hierarchy = val;
+ memcg->use_hierarchy = val;
else
retval = -EBUSY;
} else
@@ -3817,14 +3827,14 @@
}
-static unsigned long mem_cgroup_recursive_stat(struct mem_cgroup *mem,
+static unsigned long mem_cgroup_recursive_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
struct mem_cgroup *iter;
long val = 0;
/* Per-cpu values can be negative, use a signed accumulator */
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
val += mem_cgroup_read_stat(iter, idx);
if (val < 0) /* race ? */
@@ -3832,29 +3842,29 @@
return val;
}
-static inline u64 mem_cgroup_usage(struct mem_cgroup *mem, bool swap)
+static inline u64 mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
{
u64 val;
- if (!mem_cgroup_is_root(mem)) {
+ if (!mem_cgroup_is_root(memcg)) {
if (!swap)
- return res_counter_read_u64(&mem->res, RES_USAGE);
+ return res_counter_read_u64(&memcg->res, RES_USAGE);
else
- return res_counter_read_u64(&mem->memsw, RES_USAGE);
+ return res_counter_read_u64(&memcg->memsw, RES_USAGE);
}
- val = mem_cgroup_recursive_stat(mem, MEM_CGROUP_STAT_CACHE);
- val += mem_cgroup_recursive_stat(mem, MEM_CGROUP_STAT_RSS);
+ val = mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_CACHE);
+ val += mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_RSS);
if (swap)
- val += mem_cgroup_recursive_stat(mem, MEM_CGROUP_STAT_SWAPOUT);
+ val += mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_SWAPOUT);
return val << PAGE_SHIFT;
}
static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
u64 val;
int type, name;
@@ -3863,15 +3873,15 @@
switch (type) {
case _MEM:
if (name == RES_USAGE)
- val = mem_cgroup_usage(mem, false);
+ val = mem_cgroup_usage(memcg, false);
else
- val = res_counter_read_u64(&mem->res, name);
+ val = res_counter_read_u64(&memcg->res, name);
break;
case _MEMSWAP:
if (name == RES_USAGE)
- val = mem_cgroup_usage(mem, true);
+ val = mem_cgroup_usage(memcg, true);
else
- val = res_counter_read_u64(&mem->memsw, name);
+ val = res_counter_read_u64(&memcg->memsw, name);
break;
default:
BUG();
@@ -3959,24 +3969,24 @@
static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
int type, name;
- mem = mem_cgroup_from_cont(cont);
+ memcg = mem_cgroup_from_cont(cont);
type = MEMFILE_TYPE(event);
name = MEMFILE_ATTR(event);
switch (name) {
case RES_MAX_USAGE:
if (type == _MEM)
- res_counter_reset_max(&mem->res);
+ res_counter_reset_max(&memcg->res);
else
- res_counter_reset_max(&mem->memsw);
+ res_counter_reset_max(&memcg->memsw);
break;
case RES_FAILCNT:
if (type == _MEM)
- res_counter_reset_failcnt(&mem->res);
+ res_counter_reset_failcnt(&memcg->res);
else
- res_counter_reset_failcnt(&mem->memsw);
+ res_counter_reset_failcnt(&memcg->memsw);
break;
}
@@ -3993,7 +4003,7 @@
static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
if (val >= (1 << NR_MOVE_TYPE))
return -EINVAL;
@@ -4003,7 +4013,7 @@
* inconsistent.
*/
cgroup_lock();
- mem->move_charge_at_immigrate = val;
+ memcg->move_charge_at_immigrate = val;
cgroup_unlock();
return 0;
@@ -4060,49 +4070,49 @@
static void
-mem_cgroup_get_local_stat(struct mem_cgroup *mem, struct mcs_total_stat *s)
+mem_cgroup_get_local_stat(struct mem_cgroup *memcg, struct mcs_total_stat *s)
{
s64 val;
/* per cpu stat */
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_CACHE);
s->stat[MCS_CACHE] += val * PAGE_SIZE;
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_RSS);
s->stat[MCS_RSS] += val * PAGE_SIZE;
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_FILE_MAPPED);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_FILE_MAPPED);
s->stat[MCS_FILE_MAPPED] += val * PAGE_SIZE;
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGPGIN);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGPGIN);
s->stat[MCS_PGPGIN] += val;
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGPGOUT);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGPGOUT);
s->stat[MCS_PGPGOUT] += val;
if (do_swap_account) {
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_SWAPOUT);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_SWAPOUT);
s->stat[MCS_SWAP] += val * PAGE_SIZE;
}
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGFAULT);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGFAULT);
s->stat[MCS_PGFAULT] += val;
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGMAJFAULT);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGMAJFAULT);
s->stat[MCS_PGMAJFAULT] += val;
/* per zone stat */
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_INACTIVE_ANON));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_ANON));
s->stat[MCS_INACTIVE_ANON] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_ANON));
s->stat[MCS_ACTIVE_ANON] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_INACTIVE_FILE));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_FILE));
s->stat[MCS_INACTIVE_FILE] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_FILE));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_FILE));
s->stat[MCS_ACTIVE_FILE] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_UNEVICTABLE));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_UNEVICTABLE));
s->stat[MCS_UNEVICTABLE] += val * PAGE_SIZE;
}
static void
-mem_cgroup_get_total_stat(struct mem_cgroup *mem, struct mcs_total_stat *s)
+mem_cgroup_get_total_stat(struct mem_cgroup *memcg, struct mcs_total_stat *s)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
mem_cgroup_get_local_stat(iter, s);
}
@@ -4188,8 +4198,6 @@
}
#ifdef CONFIG_DEBUG_VM
- cb->fill(cb, "inactive_ratio", calc_inactive_ratio(mem_cont, NULL));
-
{
int nid, zid;
struct mem_cgroup_per_zone *mz;
@@ -4326,20 +4334,20 @@
return _a->threshold - _b->threshold;
}
-static int mem_cgroup_oom_notify_cb(struct mem_cgroup *mem)
+static int mem_cgroup_oom_notify_cb(struct mem_cgroup *memcg)
{
struct mem_cgroup_eventfd_list *ev;
- list_for_each_entry(ev, &mem->oom_notify, list)
+ list_for_each_entry(ev, &memcg->oom_notify, list)
eventfd_signal(ev->eventfd, 1);
return 0;
}
-static void mem_cgroup_oom_notify(struct mem_cgroup *mem)
+static void mem_cgroup_oom_notify(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
mem_cgroup_oom_notify_cb(iter);
}
@@ -4529,7 +4537,7 @@
static void mem_cgroup_oom_unregister_event(struct cgroup *cgrp,
struct cftype *cft, struct eventfd_ctx *eventfd)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup_eventfd_list *ev, *tmp;
int type = MEMFILE_TYPE(cft->private);
@@ -4537,7 +4545,7 @@
spin_lock(&memcg_oom_lock);
- list_for_each_entry_safe(ev, tmp, &mem->oom_notify, list) {
+ list_for_each_entry_safe(ev, tmp, &memcg->oom_notify, list) {
if (ev->eventfd == eventfd) {
list_del(&ev->list);
kfree(ev);
@@ -4550,11 +4558,11 @@
static int mem_cgroup_oom_control_read(struct cgroup *cgrp,
struct cftype *cft, struct cgroup_map_cb *cb)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
- cb->fill(cb, "oom_kill_disable", mem->oom_kill_disable);
+ cb->fill(cb, "oom_kill_disable", memcg->oom_kill_disable);
- if (atomic_read(&mem->under_oom))
+ if (atomic_read(&memcg->under_oom))
cb->fill(cb, "under_oom", 1);
else
cb->fill(cb, "under_oom", 0);
@@ -4564,7 +4572,7 @@
static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup *parent;
/* cannot set to root cgroup and only 0 and 1 are allowed */
@@ -4576,13 +4584,13 @@
cgroup_lock();
/* oom-kill-disable is a flag for subhierarchy. */
if ((parent->use_hierarchy) ||
- (mem->use_hierarchy && !list_empty(&cgrp->children))) {
+ (memcg->use_hierarchy && !list_empty(&cgrp->children))) {
cgroup_unlock();
return -EINVAL;
}
- mem->oom_kill_disable = val;
+ memcg->oom_kill_disable = val;
if (!val)
- memcg_oom_recover(mem);
+ memcg_oom_recover(memcg);
cgroup_unlock();
return 0;
}
@@ -4718,7 +4726,7 @@
}
#endif
-static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node)
+static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node)
{
struct mem_cgroup_per_node *pn;
struct mem_cgroup_per_zone *mz;
@@ -4738,21 +4746,21 @@
if (!pn)
return 1;
- mem->info.nodeinfo[node] = pn;
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
mz = &pn->zoneinfo[zone];
for_each_lru(l)
INIT_LIST_HEAD(&mz->lists[l]);
mz->usage_in_excess = 0;
mz->on_tree = false;
- mz->mem = mem;
+ mz->mem = memcg;
}
+ memcg->info.nodeinfo[node] = pn;
return 0;
}
-static void free_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node)
+static void free_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node)
{
- kfree(mem->info.nodeinfo[node]);
+ kfree(memcg->info.nodeinfo[node]);
}
static struct mem_cgroup *mem_cgroup_alloc(void)
@@ -4794,51 +4802,51 @@
* Removal of cgroup itself succeeds regardless of refs from swap.
*/
-static void __mem_cgroup_free(struct mem_cgroup *mem)
+static void __mem_cgroup_free(struct mem_cgroup *memcg)
{
int node;
- mem_cgroup_remove_from_trees(mem);
- free_css_id(&mem_cgroup_subsys, &mem->css);
+ mem_cgroup_remove_from_trees(memcg);
+ free_css_id(&mem_cgroup_subsys, &memcg->css);
for_each_node_state(node, N_POSSIBLE)
- free_mem_cgroup_per_zone_info(mem, node);
+ free_mem_cgroup_per_zone_info(memcg, node);
- free_percpu(mem->stat);
+ free_percpu(memcg->stat);
if (sizeof(struct mem_cgroup) < PAGE_SIZE)
- kfree(mem);
+ kfree(memcg);
else
- vfree(mem);
+ vfree(memcg);
}
-static void mem_cgroup_get(struct mem_cgroup *mem)
+static void mem_cgroup_get(struct mem_cgroup *memcg)
{
- atomic_inc(&mem->refcnt);
+ atomic_inc(&memcg->refcnt);
}
-static void __mem_cgroup_put(struct mem_cgroup *mem, int count)
+static void __mem_cgroup_put(struct mem_cgroup *memcg, int count)
{
- if (atomic_sub_and_test(count, &mem->refcnt)) {
- struct mem_cgroup *parent = parent_mem_cgroup(mem);
- __mem_cgroup_free(mem);
+ if (atomic_sub_and_test(count, &memcg->refcnt)) {
+ struct mem_cgroup *parent = parent_mem_cgroup(memcg);
+ __mem_cgroup_free(memcg);
if (parent)
mem_cgroup_put(parent);
}
}
-static void mem_cgroup_put(struct mem_cgroup *mem)
+static void mem_cgroup_put(struct mem_cgroup *memcg)
{
- __mem_cgroup_put(mem, 1);
+ __mem_cgroup_put(memcg, 1);
}
/*
* Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled.
*/
-static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem)
+static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg)
{
- if (!mem->res.parent)
+ if (!memcg->res.parent)
return NULL;
- return mem_cgroup_from_res_counter(mem->res.parent, res);
+ return mem_cgroup_from_res_counter(memcg->res.parent, res);
}
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -4881,16 +4889,16 @@
static struct cgroup_subsys_state * __ref
mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
{
- struct mem_cgroup *mem, *parent;
+ struct mem_cgroup *memcg, *parent;
long error = -ENOMEM;
int node;
- mem = mem_cgroup_alloc();
- if (!mem)
+ memcg = mem_cgroup_alloc();
+ if (!memcg)
return ERR_PTR(error);
for_each_node_state(node, N_POSSIBLE)
- if (alloc_mem_cgroup_per_zone_info(mem, node))
+ if (alloc_mem_cgroup_per_zone_info(memcg, node))
goto free_out;
/* root ? */
@@ -4898,7 +4906,7 @@
int cpu;
enable_swap_cgroup();
parent = NULL;
- root_mem_cgroup = mem;
+ root_mem_cgroup = memcg;
if (mem_cgroup_soft_limit_tree_init())
goto free_out;
for_each_possible_cpu(cpu) {
@@ -4909,13 +4917,13 @@
hotcpu_notifier(memcg_cpu_hotplug_callback, 0);
} else {
parent = mem_cgroup_from_cont(cont->parent);
- mem->use_hierarchy = parent->use_hierarchy;
- mem->oom_kill_disable = parent->oom_kill_disable;
+ memcg->use_hierarchy = parent->use_hierarchy;
+ memcg->oom_kill_disable = parent->oom_kill_disable;
}
if (parent && parent->use_hierarchy) {
- res_counter_init(&mem->res, &parent->res);
- res_counter_init(&mem->memsw, &parent->memsw);
+ res_counter_init(&memcg->res, &parent->res);
+ res_counter_init(&memcg->memsw, &parent->memsw);
/*
* We increment refcnt of the parent to ensure that we can
* safely access it on res_counter_charge/uncharge.
@@ -4924,21 +4932,21 @@
*/
mem_cgroup_get(parent);
} else {
- res_counter_init(&mem->res, NULL);
- res_counter_init(&mem->memsw, NULL);
+ res_counter_init(&memcg->res, NULL);
+ res_counter_init(&memcg->memsw, NULL);
}
- mem->last_scanned_child = 0;
- mem->last_scanned_node = MAX_NUMNODES;
- INIT_LIST_HEAD(&mem->oom_notify);
+ memcg->last_scanned_child = 0;
+ memcg->last_scanned_node = MAX_NUMNODES;
+ INIT_LIST_HEAD(&memcg->oom_notify);
if (parent)
- mem->swappiness = mem_cgroup_swappiness(parent);
- atomic_set(&mem->refcnt, 1);
- mem->move_charge_at_immigrate = 0;
- mutex_init(&mem->thresholds_lock);
- return &mem->css;
+ memcg->swappiness = mem_cgroup_swappiness(parent);
+ atomic_set(&memcg->refcnt, 1);
+ memcg->move_charge_at_immigrate = 0;
+ mutex_init(&memcg->thresholds_lock);
+ return &memcg->css;
free_out:
- __mem_cgroup_free(mem);
+ __mem_cgroup_free(memcg);
root_mem_cgroup = NULL;
return ERR_PTR(error);
}
@@ -4946,17 +4954,17 @@
static int mem_cgroup_pre_destroy(struct cgroup_subsys *ss,
struct cgroup *cont)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
- return mem_cgroup_force_empty(mem, false);
+ return mem_cgroup_force_empty(memcg, false);
}
static void mem_cgroup_destroy(struct cgroup_subsys *ss,
struct cgroup *cont)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
- mem_cgroup_put(mem);
+ mem_cgroup_put(memcg);
}
static int mem_cgroup_populate(struct cgroup_subsys *ss,
@@ -4979,9 +4987,9 @@
{
int ret = 0;
int batch_count = PRECHARGE_COUNT_AT_ONCE;
- struct mem_cgroup *mem = mc.to;
+ struct mem_cgroup *memcg = mc.to;
- if (mem_cgroup_is_root(mem)) {
+ if (mem_cgroup_is_root(memcg)) {
mc.precharge += count;
/* we don't need css_get for root */
return ret;
@@ -4990,16 +4998,16 @@
if (count > 1) {
struct res_counter *dummy;
/*
- * "mem" cannot be under rmdir() because we've already checked
+ * "memcg" cannot be under rmdir() because we've already checked
* by cgroup_lock_live_cgroup() that it is not removed and we
* are still under the same cgroup_mutex. So we can postpone
* css_get().
*/
- if (res_counter_charge(&mem->res, PAGE_SIZE * count, &dummy))
+ if (res_counter_charge(&memcg->res, PAGE_SIZE * count, &dummy))
goto one_by_one;
- if (do_swap_account && res_counter_charge(&mem->memsw,
+ if (do_swap_account && res_counter_charge(&memcg->memsw,
PAGE_SIZE * count, &dummy)) {
- res_counter_uncharge(&mem->res, PAGE_SIZE * count);
+ res_counter_uncharge(&memcg->res, PAGE_SIZE * count);
goto one_by_one;
}
mc.precharge += count;
@@ -5016,8 +5024,9 @@
batch_count = PRECHARGE_COUNT_AT_ONCE;
cond_resched();
}
- ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, 1, &mem, false);
- if (ret || !mem)
+ ret = __mem_cgroup_try_charge(NULL,
+ GFP_KERNEL, 1, &memcg, false);
+ if (ret || !memcg)
/* mem_cgroup_clear_mc() will do uncharge later */
return -ENOMEM;
mc.precharge++;
@@ -5291,13 +5300,13 @@
struct task_struct *p)
{
int ret = 0;
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgroup);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgroup);
- if (mem->move_charge_at_immigrate) {
+ if (memcg->move_charge_at_immigrate) {
struct mm_struct *mm;
struct mem_cgroup *from = mem_cgroup_from_task(p);
- VM_BUG_ON(from == mem);
+ VM_BUG_ON(from == memcg);
mm = get_task_mm(p);
if (!mm)
@@ -5312,7 +5321,7 @@
mem_cgroup_start_move(from);
spin_lock(&mc.lock);
mc.from = from;
- mc.to = mem;
+ mc.to = memcg;
spin_unlock(&mc.lock);
/* We set mc.moving_task later */
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 2b43ba0..edc388d 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1310,7 +1310,7 @@
* to the end.
*/
if (PageHuge(page)) {
- pr_debug("MCE: Memory failure is now running on free hugepage %#lx\n", pfn);
+ pr_info("MCE: Memory failure is now running on free hugepage %#lx\n", pfn);
return 0;
}
if (TestClearPageHWPoison(p))
@@ -1419,7 +1419,7 @@
if (PageHWPoison(hpage)) {
put_page(hpage);
- pr_debug("soft offline: %#lx hugepage already poisoned\n", pfn);
+ pr_info("soft offline: %#lx hugepage already poisoned\n", pfn);
return -EBUSY;
}
@@ -1433,8 +1433,8 @@
list_for_each_entry_safe(page1, page2, &pagelist, lru)
put_page(page1);
- pr_debug("soft offline: %#lx: migration failed %d, type %lx\n",
- pfn, ret, page->flags);
+ pr_info("soft offline: %#lx: migration failed %d, type %lx\n",
+ pfn, ret, page->flags);
if (ret > 0)
ret = -EIO;
return ret;
@@ -1505,7 +1505,7 @@
}
if (!PageLRU(page)) {
pr_info("soft_offline: %#lx: unknown non LRU page type %lx\n",
- pfn, page->flags);
+ pfn, page->flags);
return -EIO;
}
@@ -1566,7 +1566,7 @@
}
} else {
pr_info("soft offline: %#lx: isolation failed: %d, page count %d, type %lx\n",
- pfn, ret, page_count(page), page->flags);
+ pfn, ret, page_count(page), page->flags);
}
if (ret)
return ret;
diff --git a/mm/memory.c b/mm/memory.c
index a56e3ba..b2b8731 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1503,7 +1503,7 @@
}
if (flags & FOLL_GET)
- get_page(page);
+ get_page_foll(page);
if (flags & FOLL_TOUCH) {
if ((flags & FOLL_WRITE) &&
!pte_dirty(pte) && !PageDirty(page))
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 9c51f9f..cd237f4 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -111,7 +111,7 @@
/*
* run-time system-wide default policy => local allocation
*/
-struct mempolicy default_policy = {
+static struct mempolicy default_policy = {
.refcnt = ATOMIC_INIT(1), /* never free it */
.mode = MPOL_PREFERRED,
.flags = MPOL_F_LOCAL,
diff --git a/mm/migrate.c b/mm/migrate.c
index 14d0a6a..33358f8 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -621,38 +621,18 @@
return rc;
}
-/*
- * Obtain the lock on page, remove all ptes and migrate the page
- * to the newly allocated page in newpage.
- */
-static int unmap_and_move(new_page_t get_new_page, unsigned long private,
- struct page *page, int force, bool offlining, bool sync)
+static int __unmap_and_move(struct page *page, struct page *newpage,
+ int force, bool offlining, bool sync)
{
- int rc = 0;
- int *result = NULL;
- struct page *newpage = get_new_page(page, private, &result);
+ int rc = -EAGAIN;
int remap_swapcache = 1;
int charge = 0;
struct mem_cgroup *mem;
struct anon_vma *anon_vma = NULL;
- if (!newpage)
- return -ENOMEM;
-
- if (page_count(page) == 1) {
- /* page was freed from under us. So we are done. */
- goto move_newpage;
- }
- if (unlikely(PageTransHuge(page)))
- if (unlikely(split_huge_page(page)))
- goto move_newpage;
-
- /* prepare cgroup just returns 0 or -ENOMEM */
- rc = -EAGAIN;
-
if (!trylock_page(page)) {
if (!force || !sync)
- goto move_newpage;
+ goto out;
/*
* It's not safe for direct compaction to call lock_page.
@@ -668,7 +648,7 @@
* altogether.
*/
if (current->flags & PF_MEMALLOC)
- goto move_newpage;
+ goto out;
lock_page(page);
}
@@ -785,27 +765,52 @@
mem_cgroup_end_migration(mem, page, newpage, rc == 0);
unlock:
unlock_page(page);
+out:
+ return rc;
+}
-move_newpage:
+/*
+ * Obtain the lock on page, remove all ptes and migrate the page
+ * to the newly allocated page in newpage.
+ */
+static int unmap_and_move(new_page_t get_new_page, unsigned long private,
+ struct page *page, int force, bool offlining, bool sync)
+{
+ int rc = 0;
+ int *result = NULL;
+ struct page *newpage = get_new_page(page, private, &result);
+
+ if (!newpage)
+ return -ENOMEM;
+
+ if (page_count(page) == 1) {
+ /* page was freed from under us. So we are done. */
+ goto out;
+ }
+
+ if (unlikely(PageTransHuge(page)))
+ if (unlikely(split_huge_page(page)))
+ goto out;
+
+ rc = __unmap_and_move(page, newpage, force, offlining, sync);
+out:
if (rc != -EAGAIN) {
- /*
- * A page that has been migrated has all references
- * removed and will be freed. A page that has not been
- * migrated will have kepts its references and be
- * restored.
- */
- list_del(&page->lru);
+ /*
+ * A page that has been migrated has all references
+ * removed and will be freed. A page that has not been
+ * migrated will have kepts its references and be
+ * restored.
+ */
+ list_del(&page->lru);
dec_zone_page_state(page, NR_ISOLATED_ANON +
page_is_file_cache(page));
putback_lru_page(page);
}
-
/*
* Move the new page to the LRU. If migration was not successful
* then this will free the page.
*/
putback_lru_page(newpage);
-
if (result) {
if (rc)
*result = rc;
diff --git a/mm/mlock.c b/mm/mlock.c
index 048260c..bd34b3a 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -110,7 +110,15 @@
if (TestClearPageMlocked(page)) {
dec_zone_page_state(page, NR_MLOCK);
if (!isolate_lru_page(page)) {
- int ret = try_to_munlock(page);
+ int ret = SWAP_AGAIN;
+
+ /*
+ * Optimization: if the page was mapped just once,
+ * that's our mapping and we don't need to check all the
+ * other vmas.
+ */
+ if (page_mapcount(page) > 1)
+ ret = try_to_munlock(page);
/*
* did try_to_unlock() succeed or punt?
*/
@@ -549,7 +557,8 @@
if (!can_do_mlock())
goto out;
- lru_add_drain_all(); /* flush pagevec */
+ if (flags & MCL_CURRENT)
+ lru_add_drain_all(); /* flush pagevec */
down_write(¤t->mm->mmap_sem);
diff --git a/mm/mmap.c b/mm/mmap.c
index a65efd4..3c0061f 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2558,7 +2558,6 @@
{
struct vm_area_struct *vma;
struct anon_vma_chain *avc;
- int ret = -EINTR;
BUG_ON(down_read_trylock(&mm->mmap_sem));
@@ -2579,13 +2578,11 @@
vm_lock_anon_vma(mm, avc->anon_vma);
}
- ret = 0;
+ return 0;
out_unlock:
- if (ret)
- mm_drop_all_locks(mm);
-
- return ret;
+ mm_drop_all_locks(mm);
+ return -EINTR;
}
static void vm_unlock_anon_vma(struct anon_vma *anon_vma)
diff --git a/mm/mremap.c b/mm/mremap.c
index 506fa44..d6959cb 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -41,8 +41,7 @@
return NULL;
pmd = pmd_offset(pud, addr);
- split_huge_page_pmd(mm, pmd);
- if (pmd_none_or_clear_bad(pmd))
+ if (pmd_none(*pmd))
return NULL;
return pmd;
@@ -65,8 +64,6 @@
return NULL;
VM_BUG_ON(pmd_trans_huge(*pmd));
- if (pmd_none(*pmd) && __pte_alloc(mm, vma, pmd, addr))
- return NULL;
return pmd;
}
@@ -80,11 +77,7 @@
struct mm_struct *mm = vma->vm_mm;
pte_t *old_pte, *new_pte, pte;
spinlock_t *old_ptl, *new_ptl;
- unsigned long old_start;
- old_start = old_addr;
- mmu_notifier_invalidate_range_start(vma->vm_mm,
- old_start, old_end);
if (vma->vm_file) {
/*
* Subtle point from Rajesh Venkatasubramanian: before
@@ -111,7 +104,7 @@
new_pte++, new_addr += PAGE_SIZE) {
if (pte_none(*old_pte))
continue;
- pte = ptep_clear_flush(vma, old_addr, old_pte);
+ pte = ptep_get_and_clear(mm, old_addr, old_pte);
pte = move_pte(pte, new_vma->vm_page_prot, old_addr, new_addr);
set_pte_at(mm, new_addr, new_pte, pte);
}
@@ -123,7 +116,6 @@
pte_unmap_unlock(old_pte - 1, old_ptl);
if (mapping)
mutex_unlock(&mapping->i_mmap_mutex);
- mmu_notifier_invalidate_range_end(vma->vm_mm, old_start, old_end);
}
#define LATENCY_LIMIT (64 * PAGE_SIZE)
@@ -134,22 +126,43 @@
{
unsigned long extent, next, old_end;
pmd_t *old_pmd, *new_pmd;
+ bool need_flush = false;
old_end = old_addr + len;
flush_cache_range(vma, old_addr, old_end);
+ mmu_notifier_invalidate_range_start(vma->vm_mm, old_addr, old_end);
+
for (; old_addr < old_end; old_addr += extent, new_addr += extent) {
cond_resched();
next = (old_addr + PMD_SIZE) & PMD_MASK;
- if (next - 1 > old_end)
- next = old_end;
+ /* even if next overflowed, extent below will be ok */
extent = next - old_addr;
+ if (extent > old_end - old_addr)
+ extent = old_end - old_addr;
old_pmd = get_old_pmd(vma->vm_mm, old_addr);
if (!old_pmd)
continue;
new_pmd = alloc_new_pmd(vma->vm_mm, vma, new_addr);
if (!new_pmd)
break;
+ if (pmd_trans_huge(*old_pmd)) {
+ int err = 0;
+ if (extent == HPAGE_PMD_SIZE)
+ err = move_huge_pmd(vma, new_vma, old_addr,
+ new_addr, old_end,
+ old_pmd, new_pmd);
+ if (err > 0) {
+ need_flush = true;
+ continue;
+ } else if (!err) {
+ split_huge_page_pmd(vma->vm_mm, old_pmd);
+ }
+ VM_BUG_ON(pmd_trans_huge(*old_pmd));
+ }
+ if (pmd_none(*new_pmd) && __pte_alloc(new_vma->vm_mm, new_vma,
+ new_pmd, new_addr))
+ break;
next = (new_addr + PMD_SIZE) & PMD_MASK;
if (extent > next - new_addr)
extent = next - new_addr;
@@ -157,7 +170,12 @@
extent = LATENCY_LIMIT;
move_ptes(vma, old_pmd, old_addr, old_addr + extent,
new_vma, new_pmd, new_addr);
+ need_flush = true;
}
+ if (likely(need_flush))
+ flush_tlb_range(vma, old_end-len, old_addr);
+
+ mmu_notifier_invalidate_range_end(vma->vm_mm, old_end-len, old_end);
return len + old_addr - old_end; /* how much done */
}
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 626303b5..e916168 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -32,12 +32,32 @@
#include <linux/mempolicy.h>
#include <linux/security.h>
#include <linux/ptrace.h>
+#include <linux/freezer.h>
int sysctl_panic_on_oom;
int sysctl_oom_kill_allocating_task;
int sysctl_oom_dump_tasks = 1;
static DEFINE_SPINLOCK(zone_scan_lock);
+/*
+ * compare_swap_oom_score_adj() - compare and swap current's oom_score_adj
+ * @old_val: old oom_score_adj for compare
+ * @new_val: new oom_score_adj for swap
+ *
+ * Sets the oom_score_adj value for current to @new_val iff its present value is
+ * @old_val. Usually used to reinstate a previous value to prevent racing with
+ * userspacing tuning the value in the interim.
+ */
+void compare_swap_oom_score_adj(int old_val, int new_val)
+{
+ struct sighand_struct *sighand = current->sighand;
+
+ spin_lock_irq(&sighand->siglock);
+ if (current->signal->oom_score_adj == old_val)
+ current->signal->oom_score_adj = new_val;
+ spin_unlock_irq(&sighand->siglock);
+}
+
/**
* test_set_oom_score_adj() - set current's oom_score_adj and return old value
* @new_val: new oom_score_adj value
@@ -53,13 +73,7 @@
spin_lock_irq(&sighand->siglock);
old_val = current->signal->oom_score_adj;
- if (new_val != old_val) {
- if (new_val == OOM_SCORE_ADJ_MIN)
- atomic_inc(¤t->mm->oom_disable_count);
- else if (old_val == OOM_SCORE_ADJ_MIN)
- atomic_dec(¤t->mm->oom_disable_count);
- current->signal->oom_score_adj = new_val;
- }
+ current->signal->oom_score_adj = new_val;
spin_unlock_irq(&sighand->siglock);
return old_val;
@@ -172,16 +186,6 @@
return 0;
/*
- * Shortcut check for a thread sharing p->mm that is OOM_SCORE_ADJ_MIN
- * so the entire heuristic doesn't need to be executed for something
- * that cannot be killed.
- */
- if (atomic_read(&p->mm->oom_disable_count)) {
- task_unlock(p);
- return 0;
- }
-
- /*
* The memory controller may have a limit of 0 bytes, so avoid a divide
* by zero, if necessary.
*/
@@ -317,8 +321,11 @@
* blocked waiting for another task which itself is waiting
* for memory. Is there a better alternative?
*/
- if (test_tsk_thread_flag(p, TIF_MEMDIE))
+ if (test_tsk_thread_flag(p, TIF_MEMDIE)) {
+ if (unlikely(frozen(p)))
+ thaw_process(p);
return ERR_PTR(-1UL);
+ }
if (!p->mm)
continue;
@@ -435,7 +442,7 @@
task_unlock(p);
/*
- * Kill all processes sharing p->mm in other thread groups, if any.
+ * Kill all user processes sharing p->mm in other thread groups, if any.
* They don't get access to memory reserves or a higher scheduler
* priority, though, to avoid depletion of all memory or task
* starvation. This prevents mm->mmap_sem livelock when an oom killed
@@ -445,7 +452,11 @@
* signal.
*/
for_each_process(q)
- if (q->mm == mm && !same_thread_group(q, p)) {
+ if (q->mm == mm && !same_thread_group(q, p) &&
+ !(q->flags & PF_KTHREAD)) {
+ if (q->signal->oom_score_adj == OOM_SCORE_ADJ_MIN)
+ continue;
+
task_lock(q); /* Protect ->comm from prctl() */
pr_err("Kill process %d (%s) sharing same memory\n",
task_pid_nr(q), q->comm);
@@ -722,7 +733,7 @@
read_lock(&tasklist_lock);
if (sysctl_oom_kill_allocating_task &&
!oom_unkillable_task(current, NULL, nodemask) &&
- current->mm && !atomic_read(¤t->mm->oom_disable_count)) {
+ current->mm) {
/*
* oom_kill_process() needs tasklist_lock held. If it returns
* non-zero, current could not be killed so we must fallback to
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 0e309cd..793e987 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -305,7 +305,9 @@
}
/*
- *
+ * bdi_min_ratio keeps the sum of the minimum dirty shares of all
+ * registered backing devices, which, for obvious reasons, can not
+ * exceed 100%.
*/
static unsigned int bdi_min_ratio;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6e8ecb6..9dd443d 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -318,6 +318,7 @@
current->comm, page_to_pfn(page));
dump_page(page);
+ print_modules();
dump_stack();
out:
/* Leave bad fields for debug, except PageBuddy could make trouble */
@@ -1753,7 +1754,6 @@
void warn_alloc_failed(gfp_t gfp_mask, int order, const char *fmt, ...)
{
- va_list args;
unsigned int filter = SHOW_MEM_FILTER_NODES;
if ((gfp_mask & __GFP_NOWARN) || !__ratelimit(&nopage_rs))
@@ -1772,14 +1772,21 @@
filter &= ~SHOW_MEM_FILTER_NODES;
if (fmt) {
- printk(KERN_WARNING);
+ struct va_format vaf;
+ va_list args;
+
va_start(args, fmt);
- vprintk(fmt, args);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ pr_warn("%pV", &vaf);
+
va_end(args);
}
- pr_warning("%s: page allocation failure: order:%d, mode:0x%x\n",
- current->comm, order, gfp_mask);
+ pr_warn("%s: page allocation failure: order:%d, mode:0x%x\n",
+ current->comm, order, gfp_mask);
dump_stack();
if (!should_suppress_show_mem())
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 6bdc67d..2d123f9 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -133,10 +133,13 @@
static void *__meminit alloc_page_cgroup(size_t size, int nid)
{
void *addr = NULL;
+ gfp_t flags = GFP_KERNEL | __GFP_NOWARN;
- addr = alloc_pages_exact_nid(nid, size, GFP_KERNEL | __GFP_NOWARN);
- if (addr)
+ addr = alloc_pages_exact_nid(nid, size, flags);
+ if (addr) {
+ kmemleak_alloc(addr, size, 1, flags);
return addr;
+ }
if (node_state(nid, N_HIGH_MEMORY))
addr = vmalloc_node(size, nid);
@@ -357,7 +360,7 @@
spinlock_t lock;
};
-struct swap_cgroup_ctrl swap_cgroup_ctrl[MAX_SWAPFILES];
+static struct swap_cgroup_ctrl swap_cgroup_ctrl[MAX_SWAPFILES];
struct swap_cgroup {
unsigned short id;
diff --git a/mm/process_vm_access.c b/mm/process_vm_access.c
new file mode 100644
index 0000000..e920aa3
--- /dev/null
+++ b/mm/process_vm_access.c
@@ -0,0 +1,496 @@
+/*
+ * linux/mm/process_vm_access.c
+ *
+ * Copyright (C) 2010-2011 Christopher Yeoh <cyeoh@au1.ibm.com>, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/uio.h>
+#include <linux/sched.h>
+#include <linux/highmem.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+#endif
+
+/**
+ * process_vm_rw_pages - read/write pages from task specified
+ * @task: task to read/write from
+ * @mm: mm for task
+ * @process_pages: struct pages area that can store at least
+ * nr_pages_to_copy struct page pointers
+ * @pa: address of page in task to start copying from/to
+ * @start_offset: offset in page to start copying from/to
+ * @len: number of bytes to copy
+ * @lvec: iovec array specifying where to copy to/from
+ * @lvec_cnt: number of elements in iovec array
+ * @lvec_current: index in iovec array we are up to
+ * @lvec_offset: offset in bytes from current iovec iov_base we are up to
+ * @vm_write: 0 means copy from, 1 means copy to
+ * @nr_pages_to_copy: number of pages to copy
+ * @bytes_copied: returns number of bytes successfully copied
+ * Returns 0 on success, error code otherwise
+ */
+static int process_vm_rw_pages(struct task_struct *task,
+ struct mm_struct *mm,
+ struct page **process_pages,
+ unsigned long pa,
+ unsigned long start_offset,
+ unsigned long len,
+ const struct iovec *lvec,
+ unsigned long lvec_cnt,
+ unsigned long *lvec_current,
+ size_t *lvec_offset,
+ int vm_write,
+ unsigned int nr_pages_to_copy,
+ ssize_t *bytes_copied)
+{
+ int pages_pinned;
+ void *target_kaddr;
+ int pgs_copied = 0;
+ int j;
+ int ret;
+ ssize_t bytes_to_copy;
+ ssize_t rc = 0;
+
+ *bytes_copied = 0;
+
+ /* Get the pages we're interested in */
+ down_read(&mm->mmap_sem);
+ pages_pinned = get_user_pages(task, mm, pa,
+ nr_pages_to_copy,
+ vm_write, 0, process_pages, NULL);
+ up_read(&mm->mmap_sem);
+
+ if (pages_pinned != nr_pages_to_copy) {
+ rc = -EFAULT;
+ goto end;
+ }
+
+ /* Do the copy for each page */
+ for (pgs_copied = 0;
+ (pgs_copied < nr_pages_to_copy) && (*lvec_current < lvec_cnt);
+ pgs_copied++) {
+ /* Make sure we have a non zero length iovec */
+ while (*lvec_current < lvec_cnt
+ && lvec[*lvec_current].iov_len == 0)
+ (*lvec_current)++;
+ if (*lvec_current == lvec_cnt)
+ break;
+
+ /*
+ * Will copy smallest of:
+ * - bytes remaining in page
+ * - bytes remaining in destination iovec
+ */
+ bytes_to_copy = min_t(ssize_t, PAGE_SIZE - start_offset,
+ len - *bytes_copied);
+ bytes_to_copy = min_t(ssize_t, bytes_to_copy,
+ lvec[*lvec_current].iov_len
+ - *lvec_offset);
+
+ target_kaddr = kmap(process_pages[pgs_copied]) + start_offset;
+
+ if (vm_write)
+ ret = copy_from_user(target_kaddr,
+ lvec[*lvec_current].iov_base
+ + *lvec_offset,
+ bytes_to_copy);
+ else
+ ret = copy_to_user(lvec[*lvec_current].iov_base
+ + *lvec_offset,
+ target_kaddr, bytes_to_copy);
+ kunmap(process_pages[pgs_copied]);
+ if (ret) {
+ *bytes_copied += bytes_to_copy - ret;
+ pgs_copied++;
+ rc = -EFAULT;
+ goto end;
+ }
+ *bytes_copied += bytes_to_copy;
+ *lvec_offset += bytes_to_copy;
+ if (*lvec_offset == lvec[*lvec_current].iov_len) {
+ /*
+ * Need to copy remaining part of page into the
+ * next iovec if there are any bytes left in page
+ */
+ (*lvec_current)++;
+ *lvec_offset = 0;
+ start_offset = (start_offset + bytes_to_copy)
+ % PAGE_SIZE;
+ if (start_offset)
+ pgs_copied--;
+ } else {
+ start_offset = 0;
+ }
+ }
+
+end:
+ if (vm_write) {
+ for (j = 0; j < pages_pinned; j++) {
+ if (j < pgs_copied)
+ set_page_dirty_lock(process_pages[j]);
+ put_page(process_pages[j]);
+ }
+ } else {
+ for (j = 0; j < pages_pinned; j++)
+ put_page(process_pages[j]);
+ }
+
+ return rc;
+}
+
+/* Maximum number of pages kmalloc'd to hold struct page's during copy */
+#define PVM_MAX_KMALLOC_PAGES (PAGE_SIZE * 2)
+
+/**
+ * process_vm_rw_single_vec - read/write pages from task specified
+ * @addr: start memory address of target process
+ * @len: size of area to copy to/from
+ * @lvec: iovec array specifying where to copy to/from locally
+ * @lvec_cnt: number of elements in iovec array
+ * @lvec_current: index in iovec array we are up to
+ * @lvec_offset: offset in bytes from current iovec iov_base we are up to
+ * @process_pages: struct pages area that can store at least
+ * nr_pages_to_copy struct page pointers
+ * @mm: mm for task
+ * @task: task to read/write from
+ * @vm_write: 0 means copy from, 1 means copy to
+ * @bytes_copied: returns number of bytes successfully copied
+ * Returns 0 on success or on failure error code
+ */
+static int process_vm_rw_single_vec(unsigned long addr,
+ unsigned long len,
+ const struct iovec *lvec,
+ unsigned long lvec_cnt,
+ unsigned long *lvec_current,
+ size_t *lvec_offset,
+ struct page **process_pages,
+ struct mm_struct *mm,
+ struct task_struct *task,
+ int vm_write,
+ ssize_t *bytes_copied)
+{
+ unsigned long pa = addr & PAGE_MASK;
+ unsigned long start_offset = addr - pa;
+ unsigned long nr_pages;
+ ssize_t bytes_copied_loop;
+ ssize_t rc = 0;
+ unsigned long nr_pages_copied = 0;
+ unsigned long nr_pages_to_copy;
+ unsigned long max_pages_per_loop = PVM_MAX_KMALLOC_PAGES
+ / sizeof(struct pages *);
+
+ *bytes_copied = 0;
+
+ /* Work out address and page range required */
+ if (len == 0)
+ return 0;
+ nr_pages = (addr + len - 1) / PAGE_SIZE - addr / PAGE_SIZE + 1;
+
+ while ((nr_pages_copied < nr_pages) && (*lvec_current < lvec_cnt)) {
+ nr_pages_to_copy = min(nr_pages - nr_pages_copied,
+ max_pages_per_loop);
+
+ rc = process_vm_rw_pages(task, mm, process_pages, pa,
+ start_offset, len,
+ lvec, lvec_cnt,
+ lvec_current, lvec_offset,
+ vm_write, nr_pages_to_copy,
+ &bytes_copied_loop);
+ start_offset = 0;
+ *bytes_copied += bytes_copied_loop;
+
+ if (rc < 0) {
+ return rc;
+ } else {
+ len -= bytes_copied_loop;
+ nr_pages_copied += nr_pages_to_copy;
+ pa += nr_pages_to_copy * PAGE_SIZE;
+ }
+ }
+
+ return rc;
+}
+
+/* Maximum number of entries for process pages array
+ which lives on stack */
+#define PVM_MAX_PP_ARRAY_COUNT 16
+
+/**
+ * process_vm_rw_core - core of reading/writing pages from task specified
+ * @pid: PID of process to read/write from/to
+ * @lvec: iovec array specifying where to copy to/from locally
+ * @liovcnt: size of lvec array
+ * @rvec: iovec array specifying where to copy to/from in the other process
+ * @riovcnt: size of rvec array
+ * @flags: currently unused
+ * @vm_write: 0 if reading from other process, 1 if writing to other process
+ * Returns the number of bytes read/written or error code. May
+ * return less bytes than expected if an error occurs during the copying
+ * process.
+ */
+static ssize_t process_vm_rw_core(pid_t pid, const struct iovec *lvec,
+ unsigned long liovcnt,
+ const struct iovec *rvec,
+ unsigned long riovcnt,
+ unsigned long flags, int vm_write)
+{
+ struct task_struct *task;
+ struct page *pp_stack[PVM_MAX_PP_ARRAY_COUNT];
+ struct page **process_pages = pp_stack;
+ struct mm_struct *mm;
+ unsigned long i;
+ ssize_t rc = 0;
+ ssize_t bytes_copied_loop;
+ ssize_t bytes_copied = 0;
+ unsigned long nr_pages = 0;
+ unsigned long nr_pages_iov;
+ unsigned long iov_l_curr_idx = 0;
+ size_t iov_l_curr_offset = 0;
+ ssize_t iov_len;
+
+ /*
+ * Work out how many pages of struct pages we're going to need
+ * when eventually calling get_user_pages
+ */
+ for (i = 0; i < riovcnt; i++) {
+ iov_len = rvec[i].iov_len;
+ if (iov_len > 0) {
+ nr_pages_iov = ((unsigned long)rvec[i].iov_base
+ + iov_len)
+ / PAGE_SIZE - (unsigned long)rvec[i].iov_base
+ / PAGE_SIZE + 1;
+ nr_pages = max(nr_pages, nr_pages_iov);
+ }
+ }
+
+ if (nr_pages == 0)
+ return 0;
+
+ if (nr_pages > PVM_MAX_PP_ARRAY_COUNT) {
+ /* For reliability don't try to kmalloc more than
+ 2 pages worth */
+ process_pages = kmalloc(min_t(size_t, PVM_MAX_KMALLOC_PAGES,
+ sizeof(struct pages *)*nr_pages),
+ GFP_KERNEL);
+
+ if (!process_pages)
+ return -ENOMEM;
+ }
+
+ /* Get process information */
+ rcu_read_lock();
+ task = find_task_by_vpid(pid);
+ if (task)
+ get_task_struct(task);
+ rcu_read_unlock();
+ if (!task) {
+ rc = -ESRCH;
+ goto free_proc_pages;
+ }
+
+ task_lock(task);
+ if (__ptrace_may_access(task, PTRACE_MODE_ATTACH)) {
+ task_unlock(task);
+ rc = -EPERM;
+ goto put_task_struct;
+ }
+ mm = task->mm;
+
+ if (!mm || (task->flags & PF_KTHREAD)) {
+ task_unlock(task);
+ rc = -EINVAL;
+ goto put_task_struct;
+ }
+
+ atomic_inc(&mm->mm_users);
+ task_unlock(task);
+
+ for (i = 0; i < riovcnt && iov_l_curr_idx < liovcnt; i++) {
+ rc = process_vm_rw_single_vec(
+ (unsigned long)rvec[i].iov_base, rvec[i].iov_len,
+ lvec, liovcnt, &iov_l_curr_idx, &iov_l_curr_offset,
+ process_pages, mm, task, vm_write, &bytes_copied_loop);
+ bytes_copied += bytes_copied_loop;
+ if (rc != 0) {
+ /* If we have managed to copy any data at all then
+ we return the number of bytes copied. Otherwise
+ we return the error code */
+ if (bytes_copied)
+ rc = bytes_copied;
+ goto put_mm;
+ }
+ }
+
+ rc = bytes_copied;
+put_mm:
+ mmput(mm);
+
+put_task_struct:
+ put_task_struct(task);
+
+free_proc_pages:
+ if (process_pages != pp_stack)
+ kfree(process_pages);
+ return rc;
+}
+
+/**
+ * process_vm_rw - check iovecs before calling core routine
+ * @pid: PID of process to read/write from/to
+ * @lvec: iovec array specifying where to copy to/from locally
+ * @liovcnt: size of lvec array
+ * @rvec: iovec array specifying where to copy to/from in the other process
+ * @riovcnt: size of rvec array
+ * @flags: currently unused
+ * @vm_write: 0 if reading from other process, 1 if writing to other process
+ * Returns the number of bytes read/written or error code. May
+ * return less bytes than expected if an error occurs during the copying
+ * process.
+ */
+static ssize_t process_vm_rw(pid_t pid,
+ const struct iovec __user *lvec,
+ unsigned long liovcnt,
+ const struct iovec __user *rvec,
+ unsigned long riovcnt,
+ unsigned long flags, int vm_write)
+{
+ struct iovec iovstack_l[UIO_FASTIOV];
+ struct iovec iovstack_r[UIO_FASTIOV];
+ struct iovec *iov_l = iovstack_l;
+ struct iovec *iov_r = iovstack_r;
+ ssize_t rc;
+
+ if (flags != 0)
+ return -EINVAL;
+
+ /* Check iovecs */
+ if (vm_write)
+ rc = rw_copy_check_uvector(WRITE, lvec, liovcnt, UIO_FASTIOV,
+ iovstack_l, &iov_l, 1);
+ else
+ rc = rw_copy_check_uvector(READ, lvec, liovcnt, UIO_FASTIOV,
+ iovstack_l, &iov_l, 1);
+ if (rc <= 0)
+ goto free_iovecs;
+
+ rc = rw_copy_check_uvector(READ, rvec, riovcnt, UIO_FASTIOV,
+ iovstack_r, &iov_r, 0);
+ if (rc <= 0)
+ goto free_iovecs;
+
+ rc = process_vm_rw_core(pid, iov_l, liovcnt, iov_r, riovcnt, flags,
+ vm_write);
+
+free_iovecs:
+ if (iov_r != iovstack_r)
+ kfree(iov_r);
+ if (iov_l != iovstack_l)
+ kfree(iov_l);
+
+ return rc;
+}
+
+SYSCALL_DEFINE6(process_vm_readv, pid_t, pid, const struct iovec __user *, lvec,
+ unsigned long, liovcnt, const struct iovec __user *, rvec,
+ unsigned long, riovcnt, unsigned long, flags)
+{
+ return process_vm_rw(pid, lvec, liovcnt, rvec, riovcnt, flags, 0);
+}
+
+SYSCALL_DEFINE6(process_vm_writev, pid_t, pid,
+ const struct iovec __user *, lvec,
+ unsigned long, liovcnt, const struct iovec __user *, rvec,
+ unsigned long, riovcnt, unsigned long, flags)
+{
+ return process_vm_rw(pid, lvec, liovcnt, rvec, riovcnt, flags, 1);
+}
+
+#ifdef CONFIG_COMPAT
+
+asmlinkage ssize_t
+compat_process_vm_rw(compat_pid_t pid,
+ const struct compat_iovec __user *lvec,
+ unsigned long liovcnt,
+ const struct compat_iovec __user *rvec,
+ unsigned long riovcnt,
+ unsigned long flags, int vm_write)
+{
+ struct iovec iovstack_l[UIO_FASTIOV];
+ struct iovec iovstack_r[UIO_FASTIOV];
+ struct iovec *iov_l = iovstack_l;
+ struct iovec *iov_r = iovstack_r;
+ ssize_t rc = -EFAULT;
+
+ if (flags != 0)
+ return -EINVAL;
+
+ if (!access_ok(VERIFY_READ, lvec, liovcnt * sizeof(*lvec)))
+ goto out;
+
+ if (!access_ok(VERIFY_READ, rvec, riovcnt * sizeof(*rvec)))
+ goto out;
+
+ if (vm_write)
+ rc = compat_rw_copy_check_uvector(WRITE, lvec, liovcnt,
+ UIO_FASTIOV, iovstack_l,
+ &iov_l, 1);
+ else
+ rc = compat_rw_copy_check_uvector(READ, lvec, liovcnt,
+ UIO_FASTIOV, iovstack_l,
+ &iov_l, 1);
+ if (rc <= 0)
+ goto free_iovecs;
+ rc = compat_rw_copy_check_uvector(READ, rvec, riovcnt,
+ UIO_FASTIOV, iovstack_r,
+ &iov_r, 0);
+ if (rc <= 0)
+ goto free_iovecs;
+
+ rc = process_vm_rw_core(pid, iov_l, liovcnt, iov_r, riovcnt, flags,
+ vm_write);
+
+free_iovecs:
+ if (iov_r != iovstack_r)
+ kfree(iov_r);
+ if (iov_l != iovstack_l)
+ kfree(iov_l);
+
+out:
+ return rc;
+}
+
+asmlinkage ssize_t
+compat_sys_process_vm_readv(compat_pid_t pid,
+ const struct compat_iovec __user *lvec,
+ unsigned long liovcnt,
+ const struct compat_iovec __user *rvec,
+ unsigned long riovcnt,
+ unsigned long flags)
+{
+ return compat_process_vm_rw(pid, lvec, liovcnt, rvec,
+ riovcnt, flags, 0);
+}
+
+asmlinkage ssize_t
+compat_sys_process_vm_writev(compat_pid_t pid,
+ const struct compat_iovec __user *lvec,
+ unsigned long liovcnt,
+ const struct compat_iovec __user *rvec,
+ unsigned long riovcnt,
+ unsigned long flags)
+{
+ return compat_process_vm_rw(pid, lvec, liovcnt, rvec,
+ riovcnt, flags, 1);
+}
+
+#endif
diff --git a/mm/rmap.c b/mm/rmap.c
index 8005080..6541cf7 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1164,7 +1164,7 @@
/*
* Subfunctions of try_to_unmap: try_to_unmap_one called
- * repeatedly from either try_to_unmap_anon or try_to_unmap_file.
+ * repeatedly from try_to_unmap_ksm, try_to_unmap_anon or try_to_unmap_file.
*/
int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
unsigned long address, enum ttu_flags flags)
diff --git a/mm/shmem.c b/mm/shmem.c
index 2d35772..45b9acb 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1068,6 +1068,12 @@
user_shm_unlock(inode->i_size, user);
info->flags &= ~VM_LOCKED;
mapping_clear_unevictable(file->f_mapping);
+ /*
+ * Ensure that a racing putback_lru_page() can see
+ * the pages of this mapping are evictable when we
+ * skip them due to !PageLRU during the scan.
+ */
+ smp_mb__after_clear_bit();
scan_mapping_unevictable_pages(file->f_mapping);
}
retval = 0;
@@ -2497,7 +2503,7 @@
d_instantiate(path.dentry, inode);
inode->i_size = size;
- inode->i_nlink = 0; /* It is unlinked */
+ clear_nlink(inode); /* It is unlinked */
#ifndef CONFIG_MMU
error = ramfs_nommu_expand_for_mapping(inode, size);
if (error)
diff --git a/mm/slub.c b/mm/slub.c
index 95215aa..7d2a996 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -655,49 +655,6 @@
memset(p + s->objsize, val, s->inuse - s->objsize);
}
-static u8 *check_bytes8(u8 *start, u8 value, unsigned int bytes)
-{
- while (bytes) {
- if (*start != value)
- return start;
- start++;
- bytes--;
- }
- return NULL;
-}
-
-static u8 *check_bytes(u8 *start, u8 value, unsigned int bytes)
-{
- u64 value64;
- unsigned int words, prefix;
-
- if (bytes <= 16)
- return check_bytes8(start, value, bytes);
-
- value64 = value | value << 8 | value << 16 | value << 24;
- value64 = (value64 & 0xffffffff) | value64 << 32;
- prefix = 8 - ((unsigned long)start) % 8;
-
- if (prefix) {
- u8 *r = check_bytes8(start, value, prefix);
- if (r)
- return r;
- start += prefix;
- bytes -= prefix;
- }
-
- words = bytes / 8;
-
- while (words) {
- if (*(u64 *)start != value64)
- return check_bytes8(start, value, 8);
- start += 8;
- words--;
- }
-
- return check_bytes8(start, value, bytes % 8);
-}
-
static void restore_bytes(struct kmem_cache *s, char *message, u8 data,
void *from, void *to)
{
@@ -712,7 +669,7 @@
u8 *fault;
u8 *end;
- fault = check_bytes(start, value, bytes);
+ fault = memchr_inv(start, value, bytes);
if (!fault)
return 1;
@@ -805,7 +762,7 @@
if (!remainder)
return 1;
- fault = check_bytes(end - remainder, POISON_INUSE, remainder);
+ fault = memchr_inv(end - remainder, POISON_INUSE, remainder);
if (!fault)
return 1;
while (end > fault && end[-1] == POISON_INUSE)
diff --git a/mm/swap.c b/mm/swap.c
index 3a442f1..87627f1 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -78,39 +78,22 @@
{
if (unlikely(PageTail(page))) {
/* __split_huge_page_refcount can run under us */
- struct page *page_head = page->first_page;
- smp_rmb();
- /*
- * If PageTail is still set after smp_rmb() we can be sure
- * that the page->first_page we read wasn't a dangling pointer.
- * See __split_huge_page_refcount() smp_wmb().
- */
- if (likely(PageTail(page) && get_page_unless_zero(page_head))) {
+ struct page *page_head = compound_trans_head(page);
+
+ if (likely(page != page_head &&
+ get_page_unless_zero(page_head))) {
unsigned long flags;
/*
- * Verify that our page_head wasn't converted
- * to a a regular page before we got a
- * reference on it.
+ * page_head wasn't a dangling pointer but it
+ * may not be a head page anymore by the time
+ * we obtain the lock. That is ok as long as it
+ * can't be freed from under us.
*/
- if (unlikely(!PageHead(page_head))) {
- /* PageHead is cleared after PageTail */
- smp_rmb();
- VM_BUG_ON(PageTail(page));
- goto out_put_head;
- }
- /*
- * Only run compound_lock on a valid PageHead,
- * after having it pinned with
- * get_page_unless_zero() above.
- */
- smp_mb();
- /* page_head wasn't a dangling pointer */
flags = compound_lock_irqsave(page_head);
if (unlikely(!PageTail(page))) {
/* __split_huge_page_refcount run before us */
compound_unlock_irqrestore(page_head, flags);
VM_BUG_ON(PageHead(page_head));
- out_put_head:
if (put_page_testzero(page_head))
__put_single_page(page_head);
out_put_single:
@@ -121,16 +104,17 @@
VM_BUG_ON(page_head != page->first_page);
/*
* We can release the refcount taken by
- * get_page_unless_zero now that
- * split_huge_page_refcount is blocked on the
- * compound_lock.
+ * get_page_unless_zero() now that
+ * __split_huge_page_refcount() is blocked on
+ * the compound_lock.
*/
if (put_page_testzero(page_head))
VM_BUG_ON(1);
/* __split_huge_page_refcount will wait now */
- VM_BUG_ON(atomic_read(&page->_count) <= 0);
- atomic_dec(&page->_count);
+ VM_BUG_ON(page_mapcount(page) <= 0);
+ atomic_dec(&page->_mapcount);
VM_BUG_ON(atomic_read(&page_head->_count) <= 0);
+ VM_BUG_ON(atomic_read(&page->_count) != 0);
compound_unlock_irqrestore(page_head, flags);
if (put_page_testzero(page_head)) {
if (PageHead(page_head))
@@ -160,6 +144,45 @@
}
EXPORT_SYMBOL(put_page);
+/*
+ * This function is exported but must not be called by anything other
+ * than get_page(). It implements the slow path of get_page().
+ */
+bool __get_page_tail(struct page *page)
+{
+ /*
+ * This takes care of get_page() if run on a tail page
+ * returned by one of the get_user_pages/follow_page variants.
+ * get_user_pages/follow_page itself doesn't need the compound
+ * lock because it runs __get_page_tail_foll() under the
+ * proper PT lock that already serializes against
+ * split_huge_page().
+ */
+ unsigned long flags;
+ bool got = false;
+ struct page *page_head = compound_trans_head(page);
+
+ if (likely(page != page_head && get_page_unless_zero(page_head))) {
+ /*
+ * page_head wasn't a dangling pointer but it
+ * may not be a head page anymore by the time
+ * we obtain the lock. That is ok as long as it
+ * can't be freed from under us.
+ */
+ flags = compound_lock_irqsave(page_head);
+ /* here __split_huge_page_refcount won't run anymore */
+ if (likely(PageTail(page))) {
+ __get_page_tail_foll(page, false);
+ got = true;
+ }
+ compound_unlock_irqrestore(page_head, flags);
+ if (unlikely(!got))
+ put_page(page_head);
+ }
+ return got;
+}
+EXPORT_SYMBOL(__get_page_tail);
+
/**
* put_pages_list() - release a list of pages
* @pages: list of pages threaded on page->lru
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 17bc224..c9d6540 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1617,7 +1617,7 @@
oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX);
err = try_to_unuse(type);
- test_set_oom_score_adj(oom_score_adj);
+ compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj);
if (err) {
/*
diff --git a/mm/thrash.c b/mm/thrash.c
index e53f7d0..57ad495 100644
--- a/mm/thrash.c
+++ b/mm/thrash.c
@@ -29,7 +29,7 @@
static DEFINE_SPINLOCK(swap_token_lock);
struct mm_struct *swap_token_mm;
-struct mem_cgroup *swap_token_memcg;
+static struct mem_cgroup *swap_token_memcg;
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
static struct mem_cgroup *swap_token_memcg_from_mm(struct mm_struct *mm)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 5016f19..b669aa6 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1253,18 +1253,22 @@
DEFINE_RWLOCK(vmlist_lock);
struct vm_struct *vmlist;
-static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
+static void setup_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
unsigned long flags, void *caller)
{
- struct vm_struct *tmp, **p;
-
vm->flags = flags;
vm->addr = (void *)va->va_start;
vm->size = va->va_end - va->va_start;
vm->caller = caller;
va->private = vm;
va->flags |= VM_VM_AREA;
+}
+static void insert_vmalloc_vmlist(struct vm_struct *vm)
+{
+ struct vm_struct *tmp, **p;
+
+ vm->flags &= ~VM_UNLIST;
write_lock(&vmlist_lock);
for (p = &vmlist; (tmp = *p) != NULL; p = &tmp->next) {
if (tmp->addr >= vm->addr)
@@ -1275,6 +1279,13 @@
write_unlock(&vmlist_lock);
}
+static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
+ unsigned long flags, void *caller)
+{
+ setup_vmalloc_vm(vm, va, flags, caller);
+ insert_vmalloc_vmlist(vm);
+}
+
static struct vm_struct *__get_vm_area_node(unsigned long size,
unsigned long align, unsigned long flags, unsigned long start,
unsigned long end, int node, gfp_t gfp_mask, void *caller)
@@ -1313,7 +1324,18 @@
return NULL;
}
- insert_vmalloc_vm(area, va, flags, caller);
+ /*
+ * When this function is called from __vmalloc_node_range,
+ * we do not add vm_struct to vmlist here to avoid
+ * accessing uninitialized members of vm_struct such as
+ * pages and nr_pages fields. They will be set later.
+ * To distinguish it from others, we use a VM_UNLIST flag.
+ */
+ if (flags & VM_UNLIST)
+ setup_vmalloc_vm(area, va, flags, caller);
+ else
+ insert_vmalloc_vm(area, va, flags, caller);
+
return area;
}
@@ -1381,17 +1403,20 @@
va = find_vmap_area((unsigned long)addr);
if (va && va->flags & VM_VM_AREA) {
struct vm_struct *vm = va->private;
- struct vm_struct *tmp, **p;
- /*
- * remove from list and disallow access to this vm_struct
- * before unmap. (address range confliction is maintained by
- * vmap.)
- */
- write_lock(&vmlist_lock);
- for (p = &vmlist; (tmp = *p) != vm; p = &tmp->next)
- ;
- *p = tmp->next;
- write_unlock(&vmlist_lock);
+
+ if (!(vm->flags & VM_UNLIST)) {
+ struct vm_struct *tmp, **p;
+ /*
+ * remove from list and disallow access to
+ * this vm_struct before unmap. (address range
+ * confliction is maintained by vmap.)
+ */
+ write_lock(&vmlist_lock);
+ for (p = &vmlist; (tmp = *p) != vm; p = &tmp->next)
+ ;
+ *p = tmp->next;
+ write_unlock(&vmlist_lock);
+ }
vmap_debug_free_range(va->va_start, va->va_end);
free_unmap_vmap_area(va);
@@ -1568,8 +1593,8 @@
return area->addr;
fail:
- warn_alloc_failed(gfp_mask, order, "vmalloc: allocation failure, "
- "allocated %ld of %ld bytes\n",
+ warn_alloc_failed(gfp_mask, order,
+ "vmalloc: allocation failure, allocated %ld of %ld bytes\n",
(area->nr_pages*PAGE_SIZE), area->size);
vfree(area->addr);
return NULL;
@@ -1600,17 +1625,22 @@
size = PAGE_ALIGN(size);
if (!size || (size >> PAGE_SHIFT) > totalram_pages)
- return NULL;
+ goto fail;
- area = __get_vm_area_node(size, align, VM_ALLOC, start, end, node,
- gfp_mask, caller);
-
+ area = __get_vm_area_node(size, align, VM_ALLOC | VM_UNLIST,
+ start, end, node, gfp_mask, caller);
if (!area)
- return NULL;
+ goto fail;
addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller);
/*
+ * In this function, newly allocated vm_struct is not added
+ * to vmlist at __get_vm_area_node(). so, it is added here.
+ */
+ insert_vmalloc_vmlist(area);
+
+ /*
* A ref_count = 3 is needed because the vm_struct and vmap_area
* structures allocated in the __get_vm_area_node() function contain
* references to the virtual address of the vmalloc'ed block.
@@ -1618,6 +1648,12 @@
kmemleak_alloc(addr, real_size, 3, gfp_mask);
return addr;
+
+fail:
+ warn_alloc_failed(gfp_mask, 0,
+ "vmalloc: allocation failure: %lu bytes\n",
+ real_size);
+ return NULL;
}
/**
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 9fdfce7..132d1dd 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -495,15 +495,6 @@
return PAGE_ACTIVATE;
}
- /*
- * Wait on writeback if requested to. This happens when
- * direct reclaiming a large contiguous area and the
- * first attempt to free a range of pages fails.
- */
- if (PageWriteback(page) &&
- (sc->reclaim_mode & RECLAIM_MODE_SYNC))
- wait_on_page_writeback(page);
-
if (!PageWriteback(page)) {
/* synchronous write or broken a_ops? */
ClearPageReclaim(page);
@@ -642,13 +633,14 @@
lru = LRU_UNEVICTABLE;
add_page_to_unevictable_list(page);
/*
- * When racing with an mlock clearing (page is
- * unlocked), make sure that if the other thread does
- * not observe our setting of PG_lru and fails
- * isolation, we see PG_mlocked cleared below and move
+ * When racing with an mlock or AS_UNEVICTABLE clearing
+ * (page is unlocked) make sure that if the other thread
+ * does not observe our setting of PG_lru and fails
+ * isolation/check_move_unevictable_page,
+ * we see PG_mlocked/AS_UNEVICTABLE cleared below and move
* the page back to the evictable list.
*
- * The other side is TestClearPageMlocked().
+ * The other side is TestClearPageMlocked() or shmem_lock().
*/
smp_mb();
}
@@ -759,7 +751,10 @@
*/
static unsigned long shrink_page_list(struct list_head *page_list,
struct zone *zone,
- struct scan_control *sc)
+ struct scan_control *sc,
+ int priority,
+ unsigned long *ret_nr_dirty,
+ unsigned long *ret_nr_writeback)
{
LIST_HEAD(ret_pages);
LIST_HEAD(free_pages);
@@ -767,6 +762,7 @@
unsigned long nr_dirty = 0;
unsigned long nr_congested = 0;
unsigned long nr_reclaimed = 0;
+ unsigned long nr_writeback = 0;
cond_resched();
@@ -803,13 +799,12 @@
(PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
if (PageWriteback(page)) {
+ nr_writeback++;
/*
- * Synchronous reclaim is performed in two passes,
- * first an asynchronous pass over the list to
- * start parallel writeback, and a second synchronous
- * pass to wait for the IO to complete. Wait here
- * for any page for which writeback has already
- * started.
+ * Synchronous reclaim cannot queue pages for
+ * writeback due to the possibility of stack overflow
+ * but if it encounters a page under writeback, wait
+ * for the IO to complete.
*/
if ((sc->reclaim_mode & RECLAIM_MODE_SYNC) &&
may_enter_fs)
@@ -865,6 +860,25 @@
if (PageDirty(page)) {
nr_dirty++;
+ /*
+ * Only kswapd can writeback filesystem pages to
+ * avoid risk of stack overflow but do not writeback
+ * unless under significant pressure.
+ */
+ if (page_is_file_cache(page) &&
+ (!current_is_kswapd() || priority >= DEF_PRIORITY - 2)) {
+ /*
+ * Immediately reclaim when written back.
+ * Similar in principal to deactivate_page()
+ * except we already have the page isolated
+ * and know it's dirty
+ */
+ inc_zone_page_state(page, NR_VMSCAN_IMMEDIATE);
+ SetPageReclaim(page);
+
+ goto keep_locked;
+ }
+
if (references == PAGEREF_RECLAIM_CLEAN)
goto keep_locked;
if (!may_enter_fs)
@@ -999,6 +1013,8 @@
list_splice(&ret_pages, page_list);
count_vm_events(PGACTIVATE, pgactivate);
+ *ret_nr_dirty += nr_dirty;
+ *ret_nr_writeback += nr_writeback;
return nr_reclaimed;
}
@@ -1012,23 +1028,27 @@
*
* returns 0 on success, -ve errno on failure.
*/
-int __isolate_lru_page(struct page *page, int mode, int file)
+int __isolate_lru_page(struct page *page, isolate_mode_t mode, int file)
{
+ bool all_lru_mode;
int ret = -EINVAL;
/* Only take pages on the LRU. */
if (!PageLRU(page))
return ret;
+ all_lru_mode = (mode & (ISOLATE_ACTIVE|ISOLATE_INACTIVE)) ==
+ (ISOLATE_ACTIVE|ISOLATE_INACTIVE);
+
/*
* When checking the active state, we need to be sure we are
* dealing with comparible boolean values. Take the logical not
* of each.
*/
- if (mode != ISOLATE_BOTH && (!PageActive(page) != !mode))
+ if (!all_lru_mode && !PageActive(page) != !(mode & ISOLATE_ACTIVE))
return ret;
- if (mode != ISOLATE_BOTH && page_is_file_cache(page) != file)
+ if (!all_lru_mode && !!page_is_file_cache(page) != file)
return ret;
/*
@@ -1041,6 +1061,12 @@
ret = -EBUSY;
+ if ((mode & ISOLATE_CLEAN) && (PageDirty(page) || PageWriteback(page)))
+ return ret;
+
+ if ((mode & ISOLATE_UNMAPPED) && page_mapped(page))
+ return ret;
+
if (likely(get_page_unless_zero(page))) {
/*
* Be careful not to clear PageLRU until after we're
@@ -1076,7 +1102,8 @@
*/
static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
struct list_head *src, struct list_head *dst,
- unsigned long *scanned, int order, int mode, int file)
+ unsigned long *scanned, int order, isolate_mode_t mode,
+ int file)
{
unsigned long nr_taken = 0;
unsigned long nr_lumpy_taken = 0;
@@ -1201,8 +1228,8 @@
static unsigned long isolate_pages_global(unsigned long nr,
struct list_head *dst,
unsigned long *scanned, int order,
- int mode, struct zone *z,
- int active, int file)
+ isolate_mode_t mode,
+ struct zone *z, int active, int file)
{
int lru = LRU_BASE;
if (active)
@@ -1394,7 +1421,7 @@
}
/*
- * Returns true if the caller should wait to clean dirty/writeback pages.
+ * Returns true if a direct reclaim should wait on pages under writeback.
*
* If we are direct reclaiming for contiguous pages and we do not reclaim
* everything in the list, try again and wait for writeback IO to complete.
@@ -1448,6 +1475,9 @@
unsigned long nr_taken;
unsigned long nr_anon;
unsigned long nr_file;
+ unsigned long nr_dirty = 0;
+ unsigned long nr_writeback = 0;
+ isolate_mode_t reclaim_mode = ISOLATE_INACTIVE;
while (unlikely(too_many_isolated(zone, file, sc))) {
congestion_wait(BLK_RW_ASYNC, HZ/10);
@@ -1458,15 +1488,21 @@
}
set_reclaim_mode(priority, sc, false);
+ if (sc->reclaim_mode & RECLAIM_MODE_LUMPYRECLAIM)
+ reclaim_mode |= ISOLATE_ACTIVE;
+
lru_add_drain();
+
+ if (!sc->may_unmap)
+ reclaim_mode |= ISOLATE_UNMAPPED;
+ if (!sc->may_writepage)
+ reclaim_mode |= ISOLATE_CLEAN;
+
spin_lock_irq(&zone->lru_lock);
if (scanning_global_lru(sc)) {
- nr_taken = isolate_pages_global(nr_to_scan,
- &page_list, &nr_scanned, sc->order,
- sc->reclaim_mode & RECLAIM_MODE_LUMPYRECLAIM ?
- ISOLATE_BOTH : ISOLATE_INACTIVE,
- zone, 0, file);
+ nr_taken = isolate_pages_global(nr_to_scan, &page_list,
+ &nr_scanned, sc->order, reclaim_mode, zone, 0, file);
zone->pages_scanned += nr_scanned;
if (current_is_kswapd())
__count_zone_vm_events(PGSCAN_KSWAPD, zone,
@@ -1475,12 +1511,9 @@
__count_zone_vm_events(PGSCAN_DIRECT, zone,
nr_scanned);
} else {
- nr_taken = mem_cgroup_isolate_pages(nr_to_scan,
- &page_list, &nr_scanned, sc->order,
- sc->reclaim_mode & RECLAIM_MODE_LUMPYRECLAIM ?
- ISOLATE_BOTH : ISOLATE_INACTIVE,
- zone, sc->mem_cgroup,
- 0, file);
+ nr_taken = mem_cgroup_isolate_pages(nr_to_scan, &page_list,
+ &nr_scanned, sc->order, reclaim_mode, zone,
+ sc->mem_cgroup, 0, file);
/*
* mem_cgroup_isolate_pages() keeps track of
* scanned pages on its own.
@@ -1496,12 +1529,14 @@
spin_unlock_irq(&zone->lru_lock);
- nr_reclaimed = shrink_page_list(&page_list, zone, sc);
+ nr_reclaimed = shrink_page_list(&page_list, zone, sc, priority,
+ &nr_dirty, &nr_writeback);
/* Check if we should syncronously wait for writeback */
if (should_reclaim_stall(nr_taken, nr_reclaimed, priority, sc)) {
set_reclaim_mode(priority, sc, true);
- nr_reclaimed += shrink_page_list(&page_list, zone, sc);
+ nr_reclaimed += shrink_page_list(&page_list, zone, sc,
+ priority, &nr_dirty, &nr_writeback);
}
local_irq_disable();
@@ -1511,6 +1546,32 @@
putback_lru_pages(zone, sc, nr_anon, nr_file, &page_list);
+ /*
+ * If reclaim is isolating dirty pages under writeback, it implies
+ * that the long-lived page allocation rate is exceeding the page
+ * laundering rate. Either the global limits are not being effective
+ * at throttling processes due to the page distribution throughout
+ * zones or there is heavy usage of a slow backing device. The
+ * only option is to throttle from reclaim context which is not ideal
+ * as there is no guarantee the dirtying process is throttled in the
+ * same way balance_dirty_pages() manages.
+ *
+ * This scales the number of dirty pages that must be under writeback
+ * before throttling depending on priority. It is a simple backoff
+ * function that has the most effect in the range DEF_PRIORITY to
+ * DEF_PRIORITY-2 which is the priority reclaim is considered to be
+ * in trouble and reclaim is considered to be in trouble.
+ *
+ * DEF_PRIORITY 100% isolated pages must be PageWriteback to throttle
+ * DEF_PRIORITY-1 50% must be PageWriteback
+ * DEF_PRIORITY-2 25% must be PageWriteback, kswapd in trouble
+ * ...
+ * DEF_PRIORITY-6 For SWAP_CLUSTER_MAX isolated pages, throttle if any
+ * isolated page is PageWriteback
+ */
+ if (nr_writeback && nr_writeback >= (nr_taken >> (DEF_PRIORITY-priority)))
+ wait_iff_congested(zone, BLK_RW_ASYNC, HZ/10);
+
trace_mm_vmscan_lru_shrink_inactive(zone->zone_pgdat->node_id,
zone_idx(zone),
nr_scanned, nr_reclaimed,
@@ -1582,19 +1643,26 @@
struct page *page;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
unsigned long nr_rotated = 0;
+ isolate_mode_t reclaim_mode = ISOLATE_ACTIVE;
lru_add_drain();
+
+ if (!sc->may_unmap)
+ reclaim_mode |= ISOLATE_UNMAPPED;
+ if (!sc->may_writepage)
+ reclaim_mode |= ISOLATE_CLEAN;
+
spin_lock_irq(&zone->lru_lock);
if (scanning_global_lru(sc)) {
nr_taken = isolate_pages_global(nr_pages, &l_hold,
&pgscanned, sc->order,
- ISOLATE_ACTIVE, zone,
+ reclaim_mode, zone,
1, file);
zone->pages_scanned += pgscanned;
} else {
nr_taken = mem_cgroup_isolate_pages(nr_pages, &l_hold,
&pgscanned, sc->order,
- ISOLATE_ACTIVE, zone,
+ reclaim_mode, zone,
sc->mem_cgroup, 1, file);
/*
* mem_cgroup_isolate_pages() keeps track of
@@ -1699,7 +1767,7 @@
if (scanning_global_lru(sc))
low = inactive_anon_is_low_global(zone);
else
- low = mem_cgroup_inactive_anon_is_low(sc->mem_cgroup);
+ low = mem_cgroup_inactive_anon_is_low(sc->mem_cgroup, zone);
return low;
}
#else
@@ -1742,7 +1810,7 @@
if (scanning_global_lru(sc))
low = inactive_file_is_low_global(zone);
else
- low = mem_cgroup_inactive_file_is_low(sc->mem_cgroup);
+ low = mem_cgroup_inactive_file_is_low(sc->mem_cgroup, zone);
return low;
}
@@ -1795,12 +1863,19 @@
enum lru_list l;
int noswap = 0;
bool force_scan = false;
- unsigned long nr_force_scan[2];
- /* kswapd does zone balancing and needs to scan this zone */
+ /*
+ * If the zone or memcg is small, nr[l] can be 0. This
+ * results in no scanning on this priority and a potential
+ * priority drop. Global direct reclaim can go to the next
+ * zone and tends to have no problems. Global kswapd is for
+ * zone balancing and it needs to scan a minimum amount. When
+ * reclaiming for a memcg, a priority drop can cause high
+ * latencies, so it's better to scan a minimum amount there as
+ * well.
+ */
if (scanning_global_lru(sc) && current_is_kswapd())
force_scan = true;
- /* memcg may have small limit and need to avoid priority drop */
if (!scanning_global_lru(sc))
force_scan = true;
@@ -1810,8 +1885,6 @@
fraction[0] = 0;
fraction[1] = 1;
denominator = 1;
- nr_force_scan[0] = 0;
- nr_force_scan[1] = SWAP_CLUSTER_MAX;
goto out;
}
@@ -1828,8 +1901,6 @@
fraction[0] = 1;
fraction[1] = 0;
denominator = 1;
- nr_force_scan[0] = SWAP_CLUSTER_MAX;
- nr_force_scan[1] = 0;
goto out;
}
}
@@ -1878,11 +1949,6 @@
fraction[0] = ap;
fraction[1] = fp;
denominator = ap + fp + 1;
- if (force_scan) {
- unsigned long scan = SWAP_CLUSTER_MAX;
- nr_force_scan[0] = div64_u64(scan * ap, denominator);
- nr_force_scan[1] = div64_u64(scan * fp, denominator);
- }
out:
for_each_evictable_lru(l) {
int file = is_file_lru(l);
@@ -1891,20 +1957,10 @@
scan = zone_nr_lru_pages(zone, sc, l);
if (priority || noswap) {
scan >>= priority;
+ if (!scan && force_scan)
+ scan = SWAP_CLUSTER_MAX;
scan = div64_u64(scan * fraction[file], denominator);
}
-
- /*
- * If zone is small or memcg is small, nr[l] can be 0.
- * This results no-scan on this priority and priority drop down.
- * For global direct reclaim, it can visit next zone and tend
- * not to have problems. For global kswapd, it's for zone
- * balancing and it need to scan a small amounts. When using
- * memcg, priority drop can cause big latency. So, it's better
- * to scan small amount. See may_noscan above.
- */
- if (!scan && force_scan)
- scan = nr_force_scan[file];
nr[l] = scan;
}
}
@@ -1983,12 +2039,14 @@
enum lru_list l;
unsigned long nr_reclaimed, nr_scanned;
unsigned long nr_to_reclaim = sc->nr_to_reclaim;
+ struct blk_plug plug;
restart:
nr_reclaimed = 0;
nr_scanned = sc->nr_scanned;
get_scan_count(zone, sc, nr, priority);
+ blk_start_plug(&plug);
while (nr[LRU_INACTIVE_ANON] || nr[LRU_ACTIVE_FILE] ||
nr[LRU_INACTIVE_FILE]) {
for_each_evictable_lru(l) {
@@ -2012,6 +2070,7 @@
if (nr_reclaimed >= nr_to_reclaim && priority < DEF_PRIORITY)
break;
}
+ blk_finish_plug(&plug);
sc->nr_reclaimed += nr_reclaimed;
/*
@@ -2044,14 +2103,19 @@
*
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
+ *
+ * This function returns true if a zone is being reclaimed for a costly
+ * high-order allocation and compaction is either ready to begin or deferred.
+ * This indicates to the caller that it should retry the allocation or fail.
*/
-static void shrink_zones(int priority, struct zonelist *zonelist,
+static bool shrink_zones(int priority, struct zonelist *zonelist,
struct scan_control *sc)
{
struct zoneref *z;
struct zone *zone;
unsigned long nr_soft_reclaimed;
unsigned long nr_soft_scanned;
+ bool should_abort_reclaim = false;
for_each_zone_zonelist_nodemask(zone, z, zonelist,
gfp_zone(sc->gfp_mask), sc->nodemask) {
@@ -2066,6 +2130,23 @@
continue;
if (zone->all_unreclaimable && priority != DEF_PRIORITY)
continue; /* Let kswapd poll it */
+ if (COMPACTION_BUILD) {
+ /*
+ * If we already have plenty of memory free for
+ * compaction in this zone, don't free any more.
+ * Even though compaction is invoked for any
+ * non-zero order, only frequent costly order
+ * reclamation is disruptive enough to become a
+ * noticable problem, like transparent huge page
+ * allocations.
+ */
+ if (sc->order > PAGE_ALLOC_COSTLY_ORDER &&
+ (compaction_suitable(zone, sc->order) ||
+ compaction_deferred(zone))) {
+ should_abort_reclaim = true;
+ continue;
+ }
+ }
/*
* This steals pages from memory cgroups over softlimit
* and returns the number of reclaimed pages and
@@ -2083,6 +2164,8 @@
shrink_zone(priority, zone, sc);
}
+
+ return should_abort_reclaim;
}
static bool zone_reclaimable(struct zone *zone)
@@ -2147,7 +2230,9 @@
sc->nr_scanned = 0;
if (!priority)
disable_swap_token(sc->mem_cgroup);
- shrink_zones(priority, zonelist, sc);
+ if (shrink_zones(priority, zonelist, sc))
+ break;
+
/*
* Don't shrink slabs when reclaiming memory from
* over limit cgroups
@@ -2690,6 +2775,8 @@
/* If balanced, clear the congested flag */
zone_clear_flag(zone, ZONE_CONGESTED);
+ if (i <= *classzone_idx)
+ balanced += zone->present_pages;
}
}
@@ -2763,7 +2850,9 @@
static int kswapd(void *p)
{
unsigned long order, new_order;
+ unsigned balanced_order;
int classzone_idx, new_classzone_idx;
+ int balanced_classzone_idx;
pg_data_t *pgdat = (pg_data_t*)p;
struct task_struct *tsk = current;
@@ -2794,7 +2883,9 @@
set_freezable();
order = new_order = 0;
+ balanced_order = 0;
classzone_idx = new_classzone_idx = pgdat->nr_zones - 1;
+ balanced_classzone_idx = classzone_idx;
for ( ; ; ) {
int ret;
@@ -2803,7 +2894,8 @@
* new request of a similar or harder type will succeed soon
* so consider going to sleep on the basis we reclaimed at
*/
- if (classzone_idx >= new_classzone_idx && order == new_order) {
+ if (balanced_classzone_idx >= new_classzone_idx &&
+ balanced_order == new_order) {
new_order = pgdat->kswapd_max_order;
new_classzone_idx = pgdat->classzone_idx;
pgdat->kswapd_max_order = 0;
@@ -2818,9 +2910,12 @@
order = new_order;
classzone_idx = new_classzone_idx;
} else {
- kswapd_try_to_sleep(pgdat, order, classzone_idx);
+ kswapd_try_to_sleep(pgdat, balanced_order,
+ balanced_classzone_idx);
order = pgdat->kswapd_max_order;
classzone_idx = pgdat->classzone_idx;
+ new_order = order;
+ new_classzone_idx = classzone_idx;
pgdat->kswapd_max_order = 0;
pgdat->classzone_idx = pgdat->nr_zones - 1;
}
@@ -2835,7 +2930,9 @@
*/
if (!ret) {
trace_mm_vmscan_kswapd_wake(pgdat->node_id, order);
- order = balance_pgdat(pgdat, order, &classzone_idx);
+ balanced_classzone_idx = classzone_idx;
+ balanced_order = balance_pgdat(pgdat, order,
+ &balanced_classzone_idx);
}
}
return 0;
@@ -3347,66 +3444,12 @@
}
-/**
- * scan_zone_unevictable_pages - check unevictable list for evictable pages
- * @zone - zone of which to scan the unevictable list
- *
- * Scan @zone's unevictable LRU lists to check for pages that have become
- * evictable. Move those that have to @zone's inactive list where they
- * become candidates for reclaim, unless shrink_inactive_zone() decides
- * to reactivate them. Pages that are still unevictable are rotated
- * back onto @zone's unevictable list.
- */
-#define SCAN_UNEVICTABLE_BATCH_SIZE 16UL /* arbitrary lock hold batch size */
-static void scan_zone_unevictable_pages(struct zone *zone)
+static void warn_scan_unevictable_pages(void)
{
- struct list_head *l_unevictable = &zone->lru[LRU_UNEVICTABLE].list;
- unsigned long scan;
- unsigned long nr_to_scan = zone_page_state(zone, NR_UNEVICTABLE);
-
- while (nr_to_scan > 0) {
- unsigned long batch_size = min(nr_to_scan,
- SCAN_UNEVICTABLE_BATCH_SIZE);
-
- spin_lock_irq(&zone->lru_lock);
- for (scan = 0; scan < batch_size; scan++) {
- struct page *page = lru_to_page(l_unevictable);
-
- if (!trylock_page(page))
- continue;
-
- prefetchw_prev_lru_page(page, l_unevictable, flags);
-
- if (likely(PageLRU(page) && PageUnevictable(page)))
- check_move_unevictable_page(page, zone);
-
- unlock_page(page);
- }
- spin_unlock_irq(&zone->lru_lock);
-
- nr_to_scan -= batch_size;
- }
-}
-
-
-/**
- * scan_all_zones_unevictable_pages - scan all unevictable lists for evictable pages
- *
- * A really big hammer: scan all zones' unevictable LRU lists to check for
- * pages that have become evictable. Move those back to the zones'
- * inactive list where they become candidates for reclaim.
- * This occurs when, e.g., we have unswappable pages on the unevictable lists,
- * and we add swap to the system. As such, it runs in the context of a task
- * that has possibly/probably made some previously unevictable pages
- * evictable.
- */
-static void scan_all_zones_unevictable_pages(void)
-{
- struct zone *zone;
-
- for_each_zone(zone) {
- scan_zone_unevictable_pages(zone);
- }
+ printk_once(KERN_WARNING
+ "The scan_unevictable_pages sysctl/node-interface has been "
+ "disabled for lack of a legitimate use case. If you have "
+ "one, please send an email to linux-mm@kvack.org.\n");
}
/*
@@ -3419,11 +3462,8 @@
void __user *buffer,
size_t *length, loff_t *ppos)
{
+ warn_scan_unevictable_pages();
proc_doulongvec_minmax(table, write, buffer, length, ppos);
-
- if (write && *(unsigned long *)table->data)
- scan_all_zones_unevictable_pages();
-
scan_unevictable_pages = 0;
return 0;
}
@@ -3438,6 +3478,7 @@
struct sysdev_attribute *attr,
char *buf)
{
+ warn_scan_unevictable_pages();
return sprintf(buf, "0\n"); /* always zero; should fit... */
}
@@ -3445,19 +3486,7 @@
struct sysdev_attribute *attr,
const char *buf, size_t count)
{
- struct zone *node_zones = NODE_DATA(dev->id)->node_zones;
- struct zone *zone;
- unsigned long res;
- unsigned long req = strict_strtoul(buf, 10, &res);
-
- if (!req)
- return 1; /* zero is no-op */
-
- for (zone = node_zones; zone - node_zones < MAX_NR_ZONES; ++zone) {
- if (!populated_zone(zone))
- continue;
- scan_zone_unevictable_pages(zone);
- }
+ warn_scan_unevictable_pages();
return 1;
}
diff --git a/mm/vmstat.c b/mm/vmstat.c
index d52b13d..8fd603b 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -78,7 +78,7 @@
*
* vm_stat contains the global counters
*/
-atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS];
+atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS] __cacheline_aligned_in_smp;
EXPORT_SYMBOL(vm_stat);
#ifdef CONFIG_SMP
@@ -702,6 +702,7 @@
"nr_unstable",
"nr_bounce",
"nr_vmscan_write",
+ "nr_vmscan_immediate_reclaim",
"nr_writeback_temp",
"nr_isolated_anon",
"nr_isolated_file",
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index f1f2f7b..163397f 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -4,7 +4,7 @@
#include <linux/netpoll.h>
#include "vlan.h"
-bool vlan_do_receive(struct sk_buff **skbp)
+bool vlan_do_receive(struct sk_buff **skbp, bool last_handler)
{
struct sk_buff *skb = *skbp;
u16 vlan_id = skb->vlan_tci & VLAN_VID_MASK;
@@ -13,7 +13,10 @@
vlan_dev = vlan_find_dev(skb->dev, vlan_id);
if (!vlan_dev) {
- if (vlan_id)
+ /* Only the last call to vlan_do_receive() should change
+ * pkt_type to PACKET_OTHERHOST
+ */
+ if (vlan_id && last_handler)
skb->pkt_type = PACKET_OTHERHOST;
return false;
}
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 873fb3d..c7aafc7 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -137,10 +137,22 @@
kfree_rcu(tt_local_entry, rcu);
}
+static void tt_global_entry_free_rcu(struct rcu_head *rcu)
+{
+ struct tt_global_entry *tt_global_entry;
+
+ tt_global_entry = container_of(rcu, struct tt_global_entry, rcu);
+
+ if (tt_global_entry->orig_node)
+ orig_node_free_ref(tt_global_entry->orig_node);
+
+ kfree(tt_global_entry);
+}
+
static void tt_global_entry_free_ref(struct tt_global_entry *tt_global_entry)
{
if (atomic_dec_and_test(&tt_global_entry->refcount))
- kfree_rcu(tt_global_entry, rcu);
+ call_rcu(&tt_global_entry->rcu, tt_global_entry_free_rcu);
}
static void tt_local_event(struct bat_priv *bat_priv, const uint8_t *addr,
@@ -710,6 +722,9 @@
struct hlist_head *head;
spinlock_t *list_lock; /* protects write access to the hash lists */
+ if (!hash)
+ return;
+
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
list_lock = &hash->list_locks[i];
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 1ae3557..ab8d0fe 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -224,22 +224,22 @@
struct tt_local_entry {
uint8_t addr[ETH_ALEN];
+ struct hlist_node hash_entry;
unsigned long last_seen;
uint16_t flags;
atomic_t refcount;
struct rcu_head rcu;
- struct hlist_node hash_entry;
};
struct tt_global_entry {
uint8_t addr[ETH_ALEN];
+ struct hlist_node hash_entry; /* entry in the global table */
struct orig_node *orig_node;
uint8_t ttvn;
uint16_t flags; /* only TT_GLOBAL_ROAM is used */
unsigned long roam_at; /* time at which TT_GLOBAL_ROAM was set */
atomic_t refcount;
struct rcu_head rcu;
- struct hlist_node hash_entry; /* entry in the global table */
};
struct tt_change_node {
diff --git a/net/ceph/Kconfig b/net/ceph/Kconfig
index be683f2..cc04dd6 100644
--- a/net/ceph/Kconfig
+++ b/net/ceph/Kconfig
@@ -27,3 +27,17 @@
If unsure, say N.
+config CEPH_LIB_USE_DNS_RESOLVER
+ bool "Use in-kernel support for DNS lookup"
+ depends on CEPH_LIB
+ select DNS_RESOLVER
+ default n
+ help
+ If you say Y here, hostnames (e.g. monitor addresses) will
+ be resolved using the CONFIG_DNS_RESOLVER facility.
+
+ For information on how to use CONFIG_DNS_RESOLVER consult
+ Documentation/networking/dns_resolver.txt
+
+ If unsure, say N.
+
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 2883ea0..97f70e5 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -432,9 +432,12 @@
/*
* create a fresh client instance
*/
-struct ceph_client *ceph_create_client(struct ceph_options *opt, void *private)
+struct ceph_client *ceph_create_client(struct ceph_options *opt, void *private,
+ unsigned supported_features,
+ unsigned required_features)
{
struct ceph_client *client;
+ struct ceph_entity_addr *myaddr = NULL;
int err = -ENOMEM;
client = kzalloc(sizeof(*client), GFP_KERNEL);
@@ -449,15 +452,27 @@
client->auth_err = 0;
client->extra_mon_dispatch = NULL;
- client->supported_features = CEPH_FEATURE_SUPPORTED_DEFAULT;
- client->required_features = CEPH_FEATURE_REQUIRED_DEFAULT;
+ client->supported_features = CEPH_FEATURE_SUPPORTED_DEFAULT |
+ supported_features;
+ client->required_features = CEPH_FEATURE_REQUIRED_DEFAULT |
+ required_features;
- client->msgr = NULL;
+ /* msgr */
+ if (ceph_test_opt(client, MYIP))
+ myaddr = &client->options->my_addr;
+ client->msgr = ceph_messenger_create(myaddr,
+ client->supported_features,
+ client->required_features);
+ if (IS_ERR(client->msgr)) {
+ err = PTR_ERR(client->msgr);
+ goto fail;
+ }
+ client->msgr->nocrc = ceph_test_opt(client, NOCRC);
/* subsystems */
err = ceph_monc_init(&client->monc, client);
if (err < 0)
- goto fail;
+ goto fail_msgr;
err = ceph_osdc_init(&client->osdc, client);
if (err < 0)
goto fail_monc;
@@ -466,6 +481,8 @@
fail_monc:
ceph_monc_stop(&client->monc);
+fail_msgr:
+ ceph_messenger_destroy(client->msgr);
fail:
kfree(client);
return ERR_PTR(err);
@@ -490,8 +507,7 @@
ceph_debugfs_client_cleanup(client);
- if (client->msgr)
- ceph_messenger_destroy(client->msgr);
+ ceph_messenger_destroy(client->msgr);
ceph_destroy_options(client->options);
@@ -514,24 +530,9 @@
*/
int __ceph_open_session(struct ceph_client *client, unsigned long started)
{
- struct ceph_entity_addr *myaddr = NULL;
int err;
unsigned long timeout = client->options->mount_timeout * HZ;
- /* initialize the messenger */
- if (client->msgr == NULL) {
- if (ceph_test_opt(client, MYIP))
- myaddr = &client->options->my_addr;
- client->msgr = ceph_messenger_create(myaddr,
- client->supported_features,
- client->required_features);
- if (IS_ERR(client->msgr)) {
- client->msgr = NULL;
- return PTR_ERR(client->msgr);
- }
- client->msgr->nocrc = ceph_test_opt(client, NOCRC);
- }
-
/* open session, and wait for mon and osd maps */
err = ceph_monc_open_session(&client->monc);
if (err < 0)
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 9918e9e..f466930 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -11,6 +11,7 @@
#include <linux/string.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
+#include <linux/dns_resolver.h>
#include <net/tcp.h>
#include <linux/ceph/libceph.h>
@@ -1078,6 +1079,101 @@
}
/*
+ * Unlike other *_pton function semantics, zero indicates success.
+ */
+static int ceph_pton(const char *str, size_t len, struct sockaddr_storage *ss,
+ char delim, const char **ipend)
+{
+ struct sockaddr_in *in4 = (void *)ss;
+ struct sockaddr_in6 *in6 = (void *)ss;
+
+ memset(ss, 0, sizeof(*ss));
+
+ if (in4_pton(str, len, (u8 *)&in4->sin_addr.s_addr, delim, ipend)) {
+ ss->ss_family = AF_INET;
+ return 0;
+ }
+
+ if (in6_pton(str, len, (u8 *)&in6->sin6_addr.s6_addr, delim, ipend)) {
+ ss->ss_family = AF_INET6;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * Extract hostname string and resolve using kernel DNS facility.
+ */
+#ifdef CONFIG_CEPH_LIB_USE_DNS_RESOLVER
+static int ceph_dns_resolve_name(const char *name, size_t namelen,
+ struct sockaddr_storage *ss, char delim, const char **ipend)
+{
+ const char *end, *delim_p;
+ char *colon_p, *ip_addr = NULL;
+ int ip_len, ret;
+
+ /*
+ * The end of the hostname occurs immediately preceding the delimiter or
+ * the port marker (':') where the delimiter takes precedence.
+ */
+ delim_p = memchr(name, delim, namelen);
+ colon_p = memchr(name, ':', namelen);
+
+ if (delim_p && colon_p)
+ end = delim_p < colon_p ? delim_p : colon_p;
+ else if (!delim_p && colon_p)
+ end = colon_p;
+ else {
+ end = delim_p;
+ if (!end) /* case: hostname:/ */
+ end = name + namelen;
+ }
+
+ if (end <= name)
+ return -EINVAL;
+
+ /* do dns_resolve upcall */
+ ip_len = dns_query(NULL, name, end - name, NULL, &ip_addr, NULL);
+ if (ip_len > 0)
+ ret = ceph_pton(ip_addr, ip_len, ss, -1, NULL);
+ else
+ ret = -ESRCH;
+
+ kfree(ip_addr);
+
+ *ipend = end;
+
+ pr_info("resolve '%.*s' (ret=%d): %s\n", (int)(end - name), name,
+ ret, ret ? "failed" : ceph_pr_addr(ss));
+
+ return ret;
+}
+#else
+static inline int ceph_dns_resolve_name(const char *name, size_t namelen,
+ struct sockaddr_storage *ss, char delim, const char **ipend)
+{
+ return -EINVAL;
+}
+#endif
+
+/*
+ * Parse a server name (IP or hostname). If a valid IP address is not found
+ * then try to extract a hostname to resolve using userspace DNS upcall.
+ */
+static int ceph_parse_server_name(const char *name, size_t namelen,
+ struct sockaddr_storage *ss, char delim, const char **ipend)
+{
+ int ret;
+
+ ret = ceph_pton(name, namelen, ss, delim, ipend);
+ if (ret)
+ ret = ceph_dns_resolve_name(name, namelen, ss, delim, ipend);
+
+ return ret;
+}
+
+/*
* Parse an ip[:port] list into an addr array. Use the default
* monitor port if a port isn't specified.
*/
@@ -1085,15 +1181,13 @@
struct ceph_entity_addr *addr,
int max_count, int *count)
{
- int i;
+ int i, ret = -EINVAL;
const char *p = c;
dout("parse_ips on '%.*s'\n", (int)(end-c), c);
for (i = 0; i < max_count; i++) {
const char *ipend;
struct sockaddr_storage *ss = &addr[i].in_addr;
- struct sockaddr_in *in4 = (void *)ss;
- struct sockaddr_in6 *in6 = (void *)ss;
int port;
char delim = ',';
@@ -1102,15 +1196,11 @@
p++;
}
- memset(ss, 0, sizeof(*ss));
- if (in4_pton(p, end - p, (u8 *)&in4->sin_addr.s_addr,
- delim, &ipend))
- ss->ss_family = AF_INET;
- else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
- delim, &ipend))
- ss->ss_family = AF_INET6;
- else
+ ret = ceph_parse_server_name(p, end - p, ss, delim, &ipend);
+ if (ret)
goto bad;
+ ret = -EINVAL;
+
p = ipend;
if (delim == ']') {
@@ -1155,7 +1245,7 @@
bad:
pr_err("parse_ips bad ip '%.*s'\n", (int)(end - c), c);
- return -EINVAL;
+ return ret;
}
EXPORT_SYMBOL(ceph_parse_ips);
@@ -2281,7 +2371,8 @@
* construct a new message with given type, size
* the new msg has a ref count of 1.
*/
-struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
+struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags,
+ bool can_fail)
{
struct ceph_msg *m;
@@ -2333,7 +2424,7 @@
m->front.iov_base = kmalloc(front_len, flags);
}
if (m->front.iov_base == NULL) {
- pr_err("msg_new can't allocate %d bytes\n",
+ dout("ceph_msg_new can't allocate %d bytes\n",
front_len);
goto out2;
}
@@ -2348,7 +2439,14 @@
out2:
ceph_msg_put(m);
out:
- pr_err("msg_new can't create type %d front %d\n", type, front_len);
+ if (!can_fail) {
+ pr_err("msg_new can't create type %d front %d\n", type,
+ front_len);
+ WARN_ON(1);
+ } else {
+ dout("msg_new can't create type %d front %d\n", type,
+ front_len);
+ }
return NULL;
}
EXPORT_SYMBOL(ceph_msg_new);
@@ -2398,7 +2496,7 @@
}
if (!msg) {
*skip = 0;
- msg = ceph_msg_new(type, front_len, GFP_NOFS);
+ msg = ceph_msg_new(type, front_len, GFP_NOFS, false);
if (!msg) {
pr_err("unable to allocate msg type %d len %d\n",
type, front_len);
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index cbe31fa..0b62dea 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -116,14 +116,12 @@
*/
static void __close_session(struct ceph_mon_client *monc)
{
- if (monc->con) {
- dout("__close_session closing mon%d\n", monc->cur_mon);
- ceph_con_revoke(monc->con, monc->m_auth);
- ceph_con_close(monc->con);
- monc->cur_mon = -1;
- monc->pending_auth = 0;
- ceph_auth_reset(monc->auth);
- }
+ dout("__close_session closing mon%d\n", monc->cur_mon);
+ ceph_con_revoke(monc->con, monc->m_auth);
+ ceph_con_close(monc->con);
+ monc->cur_mon = -1;
+ monc->pending_auth = 0;
+ ceph_auth_reset(monc->auth);
}
/*
@@ -302,15 +300,6 @@
*/
int ceph_monc_open_session(struct ceph_mon_client *monc)
{
- if (!monc->con) {
- monc->con = kmalloc(sizeof(*monc->con), GFP_KERNEL);
- if (!monc->con)
- return -ENOMEM;
- ceph_con_init(monc->client->msgr, monc->con);
- monc->con->private = monc;
- monc->con->ops = &mon_con_ops;
- }
-
mutex_lock(&monc->mutex);
__open_session(monc);
__schedule_delayed(monc);
@@ -528,10 +517,12 @@
init_completion(&req->completion);
err = -ENOMEM;
- req->request = ceph_msg_new(CEPH_MSG_STATFS, sizeof(*h), GFP_NOFS);
+ req->request = ceph_msg_new(CEPH_MSG_STATFS, sizeof(*h), GFP_NOFS,
+ true);
if (!req->request)
goto out;
- req->reply = ceph_msg_new(CEPH_MSG_STATFS_REPLY, 1024, GFP_NOFS);
+ req->reply = ceph_msg_new(CEPH_MSG_STATFS_REPLY, 1024, GFP_NOFS,
+ true);
if (!req->reply)
goto out;
@@ -626,10 +617,12 @@
init_completion(&req->completion);
err = -ENOMEM;
- req->request = ceph_msg_new(CEPH_MSG_POOLOP, sizeof(*h), GFP_NOFS);
+ req->request = ceph_msg_new(CEPH_MSG_POOLOP, sizeof(*h), GFP_NOFS,
+ true);
if (!req->request)
goto out;
- req->reply = ceph_msg_new(CEPH_MSG_POOLOP_REPLY, 1024, GFP_NOFS);
+ req->reply = ceph_msg_new(CEPH_MSG_POOLOP_REPLY, 1024, GFP_NOFS,
+ true);
if (!req->reply)
goto out;
@@ -755,13 +748,21 @@
if (err)
goto out;
- monc->con = NULL;
+ /* connection */
+ monc->con = kmalloc(sizeof(*monc->con), GFP_KERNEL);
+ if (!monc->con)
+ goto out_monmap;
+ ceph_con_init(monc->client->msgr, monc->con);
+ monc->con->private = monc;
+ monc->con->ops = &mon_con_ops;
/* authentication */
monc->auth = ceph_auth_init(cl->options->name,
cl->options->key);
- if (IS_ERR(monc->auth))
- return PTR_ERR(monc->auth);
+ if (IS_ERR(monc->auth)) {
+ err = PTR_ERR(monc->auth);
+ goto out_con;
+ }
monc->auth->want_keys =
CEPH_ENTITY_TYPE_AUTH | CEPH_ENTITY_TYPE_MON |
CEPH_ENTITY_TYPE_OSD | CEPH_ENTITY_TYPE_MDS;
@@ -770,19 +771,21 @@
err = -ENOMEM;
monc->m_subscribe_ack = ceph_msg_new(CEPH_MSG_MON_SUBSCRIBE_ACK,
sizeof(struct ceph_mon_subscribe_ack),
- GFP_NOFS);
+ GFP_NOFS, true);
if (!monc->m_subscribe_ack)
- goto out_monmap;
+ goto out_auth;
- monc->m_subscribe = ceph_msg_new(CEPH_MSG_MON_SUBSCRIBE, 96, GFP_NOFS);
+ monc->m_subscribe = ceph_msg_new(CEPH_MSG_MON_SUBSCRIBE, 96, GFP_NOFS,
+ true);
if (!monc->m_subscribe)
goto out_subscribe_ack;
- monc->m_auth_reply = ceph_msg_new(CEPH_MSG_AUTH_REPLY, 4096, GFP_NOFS);
+ monc->m_auth_reply = ceph_msg_new(CEPH_MSG_AUTH_REPLY, 4096, GFP_NOFS,
+ true);
if (!monc->m_auth_reply)
goto out_subscribe;
- monc->m_auth = ceph_msg_new(CEPH_MSG_AUTH, 4096, GFP_NOFS);
+ monc->m_auth = ceph_msg_new(CEPH_MSG_AUTH, 4096, GFP_NOFS, true);
monc->pending_auth = 0;
if (!monc->m_auth)
goto out_auth_reply;
@@ -808,6 +811,10 @@
ceph_msg_put(monc->m_subscribe);
out_subscribe_ack:
ceph_msg_put(monc->m_subscribe_ack);
+out_auth:
+ ceph_auth_destroy(monc->auth);
+out_con:
+ monc->con->ops->put(monc->con);
out_monmap:
kfree(monc->monmap);
out:
@@ -822,11 +829,11 @@
mutex_lock(&monc->mutex);
__close_session(monc);
- if (monc->con) {
- monc->con->private = NULL;
- monc->con->ops->put(monc->con);
- monc->con = NULL;
- }
+
+ monc->con->private = NULL;
+ monc->con->ops->put(monc->con);
+ monc->con = NULL;
+
mutex_unlock(&monc->mutex);
ceph_auth_destroy(monc->auth);
@@ -973,7 +980,7 @@
case CEPH_MSG_MON_MAP:
case CEPH_MSG_MDS_MAP:
case CEPH_MSG_OSD_MAP:
- m = ceph_msg_new(type, front_len, GFP_NOFS);
+ m = ceph_msg_new(type, front_len, GFP_NOFS, false);
break;
}
@@ -1000,7 +1007,7 @@
if (!con->private)
goto out;
- if (monc->con && !monc->hunting)
+ if (!monc->hunting)
pr_info("mon%d %s session lost, "
"hunting for new mon\n", monc->cur_mon,
ceph_pr_addr(&monc->con->peer_addr.in_addr));
diff --git a/net/ceph/msgpool.c b/net/ceph/msgpool.c
index 1f4cb30..11d5f41 100644
--- a/net/ceph/msgpool.c
+++ b/net/ceph/msgpool.c
@@ -12,7 +12,7 @@
struct ceph_msgpool *pool = arg;
struct ceph_msg *msg;
- msg = ceph_msg_new(0, pool->front_len, gfp_mask);
+ msg = ceph_msg_new(0, pool->front_len, gfp_mask, true);
if (!msg) {
dout("msgpool_alloc %s failed\n", pool->name);
} else {
@@ -61,7 +61,7 @@
WARN_ON(1);
/* try to alloc a fresh message */
- return ceph_msg_new(0, front_len, GFP_NOFS);
+ return ceph_msg_new(0, front_len, GFP_NOFS, false);
}
msg = mempool_alloc(pool->pool, GFP_NOFS);
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 88ad8a2..733e4600 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -227,7 +227,7 @@
msg = ceph_msgpool_get(&osdc->msgpool_op_reply, 0);
else
msg = ceph_msg_new(CEPH_MSG_OSD_OPREPLY,
- OSD_OPREPLY_FRONT_LEN, gfp_flags);
+ OSD_OPREPLY_FRONT_LEN, gfp_flags, true);
if (!msg) {
ceph_osdc_put_request(req);
return NULL;
@@ -250,7 +250,7 @@
if (use_mempool)
msg = ceph_msgpool_get(&osdc->msgpool_op, 0);
else
- msg = ceph_msg_new(CEPH_MSG_OSD_OP, msg_size, gfp_flags);
+ msg = ceph_msg_new(CEPH_MSG_OSD_OP, msg_size, gfp_flags, true);
if (!msg) {
ceph_osdc_put_request(req);
return NULL;
@@ -943,7 +943,7 @@
* Caller should hold map_sem for read and request_mutex.
*/
static int __map_request(struct ceph_osd_client *osdc,
- struct ceph_osd_request *req)
+ struct ceph_osd_request *req, int force_resend)
{
struct ceph_osd_request_head *reqhead = req->r_request->front.iov_base;
struct ceph_pg pgid;
@@ -967,7 +967,8 @@
num = err;
}
- if ((req->r_osd && req->r_osd->o_osd == o &&
+ if ((!force_resend &&
+ req->r_osd && req->r_osd->o_osd == o &&
req->r_sent >= req->r_osd->o_incarnation &&
req->r_num_pg_osds == num &&
memcmp(req->r_pg_osds, acting, sizeof(acting[0])*num) == 0) ||
@@ -1289,18 +1290,18 @@
*
* Caller should hold map_sem for read and request_mutex.
*/
-static void kick_requests(struct ceph_osd_client *osdc)
+static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
{
struct ceph_osd_request *req, *nreq;
struct rb_node *p;
int needmap = 0;
int err;
- dout("kick_requests\n");
+ dout("kick_requests %s\n", force_resend ? " (force resend)" : "");
mutex_lock(&osdc->request_mutex);
for (p = rb_first(&osdc->requests); p; p = rb_next(p)) {
req = rb_entry(p, struct ceph_osd_request, r_node);
- err = __map_request(osdc, req);
+ err = __map_request(osdc, req, force_resend);
if (err < 0)
continue; /* error */
if (req->r_osd == NULL) {
@@ -1318,7 +1319,7 @@
r_linger_item) {
dout("linger req=%p req->r_osd=%p\n", req, req->r_osd);
- err = __map_request(osdc, req);
+ err = __map_request(osdc, req, force_resend);
if (err == 0)
continue; /* no change and no osd was specified */
if (err < 0)
@@ -1395,7 +1396,7 @@
ceph_osdmap_destroy(osdc->osdmap);
osdc->osdmap = newmap;
}
- kick_requests(osdc);
+ kick_requests(osdc, 0);
reset_changed_osds(osdc);
} else {
dout("ignoring incremental map %u len %d\n",
@@ -1423,6 +1424,8 @@
"older than our %u\n", epoch, maplen,
osdc->osdmap->epoch);
} else {
+ int skipped_map = 0;
+
dout("taking full map %u len %d\n", epoch, maplen);
newmap = osdmap_decode(&p, p+maplen);
if (IS_ERR(newmap)) {
@@ -1432,9 +1435,12 @@
BUG_ON(!newmap);
oldmap = osdc->osdmap;
osdc->osdmap = newmap;
- if (oldmap)
+ if (oldmap) {
+ if (oldmap->epoch + 1 < newmap->epoch)
+ skipped_map = 1;
ceph_osdmap_destroy(oldmap);
- kick_requests(osdc);
+ }
+ kick_requests(osdc, skipped_map);
}
p += maplen;
nr_maps--;
@@ -1707,7 +1713,7 @@
* the request still han't been touched yet.
*/
if (req->r_sent == 0) {
- rc = __map_request(osdc, req);
+ rc = __map_request(osdc, req, 0);
if (rc < 0) {
if (nofail) {
dout("osdc_start_request failed map, "
@@ -2032,7 +2038,7 @@
if (front > req->r_reply->front.iov_len) {
pr_warning("get_reply front %d > preallocated %d\n",
front, (int)req->r_reply->front.iov_len);
- m = ceph_msg_new(CEPH_MSG_OSD_OPREPLY, front, GFP_NOFS);
+ m = ceph_msg_new(CEPH_MSG_OSD_OPREPLY, front, GFP_NOFS, false);
if (!m)
goto out;
ceph_msg_put(req->r_reply);
@@ -2080,7 +2086,7 @@
switch (type) {
case CEPH_MSG_OSD_MAP:
case CEPH_MSG_WATCH_NOTIFY:
- return ceph_msg_new(type, front, GFP_NOFS);
+ return ceph_msg_new(type, front, GFP_NOFS, false);
case CEPH_MSG_OSD_OPREPLY:
return get_reply(con, hdr, skip);
default:
diff --git a/net/core/dev.c b/net/core/dev.c
index edcf019..6ba50a1 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3283,18 +3283,18 @@
ncls:
#endif
+ rx_handler = rcu_dereference(skb->dev->rx_handler);
if (vlan_tx_tag_present(skb)) {
if (pt_prev) {
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = NULL;
}
- if (vlan_do_receive(&skb))
+ if (vlan_do_receive(&skb, !rx_handler))
goto another_round;
else if (unlikely(!skb))
goto out;
}
- rx_handler = rcu_dereference(skb->dev->rx_handler);
if (rx_handler) {
if (pt_prev) {
ret = deliver_skb(skb, pt_prev, orig_dev);
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index b74f761..17ee85c 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -271,7 +271,7 @@
&ireq6->loc_addr,
&ireq6->rmt_addr);
ipv6_addr_copy(&fl6.daddr, &ireq6->rmt_addr);
- err = ip6_xmit(sk, skb, &fl6, opt);
+ err = ip6_xmit(sk, skb, &fl6, opt, np->tclass);
err = net_xmit_eval(err);
}
@@ -326,7 +326,7 @@
dst = ip6_dst_lookup_flow(ctl_sk, &fl6, NULL, false);
if (!IS_ERR(dst)) {
skb_dst_set(skb, dst);
- ip6_xmit(ctl_sk, skb, &fl6, NULL);
+ ip6_xmit(ctl_sk, skb, &fl6, NULL, 0);
DCCP_INC_STATS_BH(DCCP_MIB_OUTSEGS);
DCCP_INC_STATS_BH(DCCP_MIB_OUTRSTS);
return;
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 85a2fbe..66363b6 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -345,6 +345,7 @@
tw6 = inet6_twsk((struct sock *)tw);
ipv6_addr_copy(&tw6->tw_v6_daddr, &np->daddr);
ipv6_addr_copy(&tw6->tw_v6_rcv_saddr, &np->rcv_saddr);
+ tw->tw_tclass = np->tclass;
tw->tw_ipv6only = np->ipv6only;
}
#endif
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e39239e..d0611a5 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1713,6 +1713,40 @@
ip6_route_add(&cfg);
}
+
+static struct rt6_info *addrconf_get_prefix_route(const struct in6_addr *pfx,
+ int plen,
+ const struct net_device *dev,
+ u32 flags, u32 noflags)
+{
+ struct fib6_node *fn;
+ struct rt6_info *rt = NULL;
+ struct fib6_table *table;
+
+ table = fib6_get_table(dev_net(dev), RT6_TABLE_PREFIX);
+ if (table == NULL)
+ return NULL;
+
+ write_lock_bh(&table->tb6_lock);
+ fn = fib6_locate(&table->tb6_root, pfx, plen, NULL, 0);
+ if (!fn)
+ goto out;
+ for (rt = fn->leaf; rt; rt = rt->dst.rt6_next) {
+ if (rt->rt6i_dev->ifindex != dev->ifindex)
+ continue;
+ if ((rt->rt6i_flags & flags) != flags)
+ continue;
+ if ((noflags != 0) && ((rt->rt6i_flags & flags) != 0))
+ continue;
+ dst_hold(&rt->dst);
+ break;
+ }
+out:
+ write_unlock_bh(&table->tb6_lock);
+ return rt;
+}
+
+
/* Create "default" multicast route to the interface */
static void addrconf_add_mroute(struct net_device *dev)
@@ -1842,10 +1876,13 @@
if (addrconf_finite_timeout(rt_expires))
rt_expires *= HZ;
- rt = rt6_lookup(net, &pinfo->prefix, NULL,
- dev->ifindex, 1);
+ rt = addrconf_get_prefix_route(&pinfo->prefix,
+ pinfo->prefix_len,
+ dev,
+ RTF_ADDRCONF | RTF_PREFIX_RT,
+ RTF_GATEWAY | RTF_DEFAULT);
- if (rt && addrconf_is_prefix_route(rt)) {
+ if (rt) {
/* Autoconf prefix route */
if (valid_lft == 0) {
ip6_del_rt(rt);
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 2916200..fee46d5 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -248,7 +248,7 @@
/* Restore final destination back after routing done */
ipv6_addr_copy(&fl6.daddr, &np->daddr);
- res = ip6_xmit(sk, skb, &fl6, np->opt);
+ res = ip6_xmit(sk, skb, &fl6, np->opt, np->tclass);
rcu_read_unlock();
return res;
}
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 1c9bf8b5..84d0bd5 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -180,7 +180,7 @@
*/
int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6,
- struct ipv6_txoptions *opt)
+ struct ipv6_txoptions *opt, int tclass)
{
struct net *net = sock_net(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
@@ -190,7 +190,6 @@
u8 proto = fl6->flowi6_proto;
int seg_len = skb->len;
int hlimit = -1;
- int tclass = 0;
u32 mtu;
if (opt) {
@@ -228,10 +227,8 @@
/*
* Fill in the IPv6 header
*/
- if (np) {
- tclass = np->tclass;
+ if (np)
hlimit = np->hop_limit;
- }
if (hlimit < 0)
hlimit = ip6_dst_hoplimit(dst);
@@ -1126,7 +1123,7 @@
hh_len + fragheaderlen + transhdrlen + 20,
(flags & MSG_DONTWAIT), &err);
if (skb == NULL)
- return -ENOMEM;
+ return err;
/* reserve space for Hardware header */
skb_reserve(skb, hh_len);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index fb545ed..57b82dc 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1086,11 +1086,10 @@
rt->dst.output = ip6_output;
dst_set_neighbour(&rt->dst, neigh);
atomic_set(&rt->dst.__refcnt, 1);
- dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
-
ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
rt->rt6i_dst.plen = 128;
rt->rt6i_idev = idev;
+ dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
spin_lock_bh(&icmp6_dst_lock);
rt->dst.next = icmp6_dst_gc_list;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index c8683fc..10b2b31 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -513,7 +513,7 @@
__tcp_v6_send_check(skb, &treq->loc_addr, &treq->rmt_addr);
ipv6_addr_copy(&fl6.daddr, &treq->rmt_addr);
- err = ip6_xmit(sk, skb, &fl6, opt);
+ err = ip6_xmit(sk, skb, &fl6, opt, np->tclass);
err = net_xmit_eval(err);
}
@@ -979,7 +979,7 @@
}
static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
- u32 ts, struct tcp_md5sig_key *key, int rst)
+ u32 ts, struct tcp_md5sig_key *key, int rst, u8 tclass)
{
const struct tcphdr *th = tcp_hdr(skb);
struct tcphdr *t1;
@@ -1060,7 +1060,7 @@
dst = ip6_dst_lookup_flow(ctl_sk, &fl6, NULL, false);
if (!IS_ERR(dst)) {
skb_dst_set(buff, dst);
- ip6_xmit(ctl_sk, buff, &fl6, NULL);
+ ip6_xmit(ctl_sk, buff, &fl6, NULL, tclass);
TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
if (rst)
TCP_INC_STATS_BH(net, TCP_MIB_OUTRSTS);
@@ -1093,13 +1093,13 @@
ack_seq = ntohl(th->seq) + th->syn + th->fin + skb->len -
(th->doff << 2);
- tcp_v6_send_response(skb, seq, ack_seq, 0, 0, key, 1);
+ tcp_v6_send_response(skb, seq, ack_seq, 0, 0, key, 1, 0);
}
static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 ts,
- struct tcp_md5sig_key *key)
+ struct tcp_md5sig_key *key, u8 tclass)
{
- tcp_v6_send_response(skb, seq, ack, win, ts, key, 0);
+ tcp_v6_send_response(skb, seq, ack, win, ts, key, 0, tclass);
}
static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb)
@@ -1109,7 +1109,8 @@
tcp_v6_send_ack(skb, tcptw->tw_snd_nxt, tcptw->tw_rcv_nxt,
tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale,
- tcptw->tw_ts_recent, tcp_twsk_md5_key(tcptw));
+ tcptw->tw_ts_recent, tcp_twsk_md5_key(tcptw),
+ tw->tw_tclass);
inet_twsk_put(tw);
}
@@ -1118,7 +1119,7 @@
struct request_sock *req)
{
tcp_v6_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent,
- tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr));
+ tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr), 0);
}
diff --git a/net/nfc/nfc.h b/net/nfc/nfc.h
index b6753f4..d86583f 100644
--- a/net/nfc/nfc.h
+++ b/net/nfc/nfc.h
@@ -27,7 +27,7 @@
#include <net/nfc/nfc.h>
#include <net/sock.h>
-__attribute__((format (printf, 2, 3)))
+__printf(2, 3)
int nfc_printk(const char *level, const char *fmt, ...);
#define nfc_info(fmt, arg...) nfc_printk(KERN_INFO, fmt, ##arg)
diff --git a/net/rds/rds.h b/net/rds/rds.h
index da8adac..7eaba18 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -36,8 +36,8 @@
#define rdsdebug(fmt, args...) pr_debug("%s(): " fmt, __func__ , ##args)
#else
/* sigh, pr_debug() causes unused variable warnings */
-static inline void __attribute__ ((format (printf, 1, 2)))
-rdsdebug(char *fmt, ...)
+static inline __printf(1, 2)
+void rdsdebug(char *fmt, ...)
{
}
#endif
@@ -625,8 +625,8 @@
struct rds_info_lengths *lens,
int (*visitor)(struct rds_connection *, void *),
size_t item_len);
-void __rds_conn_error(struct rds_connection *conn, const char *, ...)
- __attribute__ ((format (printf, 2, 3)));
+__printf(2, 3)
+void __rds_conn_error(struct rds_connection *conn, const char *, ...);
#define rds_conn_error(conn, fmt...) \
__rds_conn_error(conn, KERN_WARNING "RDS: " fmt)
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index aabaee4..8104278 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -243,7 +243,7 @@
if (!(transport->param_flags & SPP_PMTUD_ENABLE))
skb->local_df = 1;
- return ip6_xmit(sk, skb, &fl6, np->opt);
+ return ip6_xmit(sk, skb, &fl6, np->opt, np->tclass);
}
/* Returns the dst cache entry for the given source and destination ip
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 30d70ab..dd5cc00 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -971,9 +971,8 @@
/*
* Printk the given error with the address of the client that caused it.
*/
-static int
-__attribute__ ((format (printf, 2, 3)))
-svc_printk(struct svc_rqst *rqstp, const char *fmt, ...)
+static __printf(2, 3)
+int svc_printk(struct svc_rqst *rqstp, const char *fmt, ...)
{
va_list args;
int r;
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 0b3e35c..5e93342 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -240,9 +240,8 @@
our $Type;
our $Declare;
-our $UTF8 = qr {
- [\x09\x0A\x0D\x20-\x7E] # ASCII
- | [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
+our $NON_ASCII_UTF8 = qr{
+ [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
| \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
| [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte
| \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates
@@ -251,6 +250,11 @@
| \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
}x;
+our $UTF8 = qr{
+ [\x09\x0A\x0D\x20-\x7E] # ASCII
+ | $NON_ASCII_UTF8
+}x;
+
our $typeTypedefs = qr{(?x:
(?:__)?(?:u|s|be|le)(?:8|16|32|64)|
atomic_t
@@ -1330,6 +1334,9 @@
my $signoff = 0;
my $is_patch = 0;
+ my $in_header_lines = 1;
+ my $in_commit_log = 0; #Scanning lines before patch
+
our @report = ();
our $cnt_lines = 0;
our $cnt_error = 0;
@@ -1497,7 +1504,6 @@
if ($line =~ /^diff --git.*?(\S+)$/) {
$realfile = $1;
$realfile =~ s@^([^/]*)/@@;
-
} elsif ($line =~ /^\+\+\+\s+(\S+)/) {
$realfile = $1;
$realfile =~ s@^([^/]*)/@@;
@@ -1536,6 +1542,7 @@
# Check the patch for a signoff:
if ($line =~ /^\s*signed-off-by:/i) {
$signoff++;
+ $in_commit_log = 0;
}
# Check signature styles
@@ -1613,6 +1620,21 @@
"Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr);
}
+# Check if it's the start of a commit log
+# (not a header line and we haven't seen the patch filename)
+ if ($in_header_lines && $realfile =~ /^$/ &&
+ $rawline !~ /^(commit\b|from\b|\w+:).+$/i) {
+ $in_header_lines = 0;
+ $in_commit_log = 1;
+ }
+
+# Still not yet in a patch, check for any UTF-8
+ if ($in_commit_log && $realfile =~ /^$/ &&
+ $rawline =~ /$NON_ASCII_UTF8/) {
+ CHK("UTF8_BEFORE_PATCH",
+ "8-bit UTF-8 used in possible commit log\n" . $herecurr);
+ }
+
# ignore non-hunk lines and lines being removed
next if (!$hunk_line || $line =~ /^-/);
@@ -3151,10 +3173,10 @@
"consider using a completion\n" . $herecurr);
}
-# recommend kstrto* over simple_strto*
- if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
+# recommend kstrto* over simple_strto* and strict_strto*
+ if ($line =~ /\b((simple|strict)_(strto(l|ll|ul|ull)))\s*\(/) {
WARN("CONSIDER_KSTRTO",
- "consider using kstrto* in preference to simple_$1\n" . $herecurr);
+ "$1 is obsolete, use k$3 instead\n" . $herecurr);
}
# check for __initcall(), use device_initcall() explicitly please
if ($line =~ /^.\s*__initcall\s*\(/) {
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index 19c053b..4f554f20 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -9,7 +9,7 @@
select CRYPTO_HMAC
select CRYPTO_MD5
select CRYPTO_SHA1
- select TCG_TPM if !S390
+ select TCG_TPM if !S390 && !UML
select TCG_TIS if TCG_TPM
help
The Trusted Computing Group(TCG) runtime Integrity
diff --git a/security/keys/compat.c b/security/keys/compat.c
index 338b510..4c48e13 100644
--- a/security/keys/compat.c
+++ b/security/keys/compat.c
@@ -38,7 +38,7 @@
ret = compat_rw_copy_check_uvector(WRITE, _payload_iov, ioc,
ARRAY_SIZE(iovstack),
- iovstack, &iov);
+ iovstack, &iov, 1);
if (ret < 0)
return ret;
if (ret == 0)
diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c
index f33804c..dcc843c 100644
--- a/security/keys/encrypted-keys/encrypted.c
+++ b/security/keys/encrypted-keys/encrypted.c
@@ -293,7 +293,7 @@
/* convert the hex encoded iv, encrypted-data and HMAC to ascii */
bufp = &ascii_buf[len];
for (i = 0; i < (asciiblob_len - len) / 2; i++)
- bufp = pack_hex_byte(bufp, iv[i]);
+ bufp = hex_byte_pack(bufp, iv[i]);
out:
return ascii_buf;
}
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index eca51918..0b3f5d7 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -1065,7 +1065,7 @@
goto no_payload;
ret = rw_copy_check_uvector(WRITE, _payload_iov, ioc,
- ARRAY_SIZE(iovstack), iovstack, &iov);
+ ARRAY_SIZE(iovstack), iovstack, &iov, 1);
if (ret < 0)
return ret;
if (ret == 0)
diff --git a/security/keys/trusted.c b/security/keys/trusted.c
index 0964fc2..0ed5fdf 100644
--- a/security/keys/trusted.c
+++ b/security/keys/trusted.c
@@ -1098,7 +1098,7 @@
bufp = ascii_buf;
for (i = 0; i < p->blob_len; i++)
- bufp = pack_hex_byte(bufp, p->blob[i]);
+ bufp = hex_byte_pack(bufp, p->blob[i]);
if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) {
kfree(ascii_buf);
return -EFAULT;
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index 150911c..c47d3ce 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -966,6 +966,9 @@
return found;
}
+static struct tomoyo_domain_info *tomoyo_find_domain_by_qid
+(unsigned int serial);
+
/**
* tomoyo_select_domain - Parse select command.
*
@@ -999,6 +1002,8 @@
} else if (!strncmp(data, "domain=", 7)) {
if (tomoyo_domain_def(data + 7))
domain = tomoyo_find_domain(data + 7);
+ } else if (sscanf(data, "Q=%u", &pid) == 1) {
+ domain = tomoyo_find_domain_by_qid(pid);
} else
return false;
head->w.domain = domain;
@@ -1894,6 +1899,7 @@
/* Structure for query. */
struct tomoyo_query {
struct list_head list;
+ struct tomoyo_domain_info *domain;
char *query;
size_t query_len;
unsigned int serial;
@@ -2044,6 +2050,7 @@
goto out;
}
len = tomoyo_round2(entry.query_len);
+ entry.domain = r->domain;
spin_lock(&tomoyo_query_list_lock);
if (tomoyo_memory_quota[TOMOYO_MEMORY_QUERY] &&
tomoyo_memory_used[TOMOYO_MEMORY_QUERY] + len
@@ -2091,6 +2098,29 @@
}
/**
+ * tomoyo_find_domain_by_qid - Get domain by query id.
+ *
+ * @serial: Query ID assigned by tomoyo_supervisor().
+ *
+ * Returns pointer to "struct tomoyo_domain_info" if found, NULL otherwise.
+ */
+static struct tomoyo_domain_info *tomoyo_find_domain_by_qid
+(unsigned int serial)
+{
+ struct tomoyo_query *ptr;
+ struct tomoyo_domain_info *domain = NULL;
+ spin_lock(&tomoyo_query_list_lock);
+ list_for_each_entry(ptr, &tomoyo_query_list, list) {
+ if (ptr->serial != serial || ptr->answer)
+ continue;
+ domain = ptr->domain;
+ break;
+ }
+ spin_unlock(&tomoyo_query_list_lock);
+ return domain;
+}
+
+/**
* tomoyo_poll_query - poll() for /sys/kernel/security/tomoyo/query.
*
* @file: Pointer to "struct file".
diff --git a/sound/Kconfig b/sound/Kconfig
index 1fef141..261a03c 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -59,7 +59,7 @@
source "sound/oss/dmasound/Kconfig"
-if !M68K
+if !M68K && !UML
menuconfig SND
tristate "Advanced Linux Sound Architecture"
diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index 3687a6c..762af68 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -1067,7 +1067,6 @@
printk(KERN_DEBUG PFX "created and attached onyx instance\n");
return 0;
fail:
- i2c_set_clientdata(client, NULL);
kfree(onyx);
return -ENODEV;
}
@@ -1112,8 +1111,7 @@
aoa_codec_unregister(&onyx->codec);
of_node_put(onyx->codec.node);
- if (onyx->codec_info)
- kfree(onyx->codec_info);
+ kfree(onyx->codec_info);
kfree(onyx);
return 0;
}
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index d0cead3..e518d38 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -443,7 +443,7 @@
mutex_lock(&aaci->irq_lock);
if (!aaci->users++) {
ret = request_irq(aaci->dev->irq[0], aaci_irq,
- IRQF_SHARED | IRQF_DISABLED, DRIVER_NAME, aaci);
+ IRQF_SHARED, DRIVER_NAME, aaci);
if (ret != 0)
aaci->users--;
}
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 88eec38..8ad6535 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -359,7 +359,7 @@
if (ret)
goto err_clk2;
- ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
+ ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL);
if (ret < 0)
goto err_irq;
diff --git a/sound/core/control.c b/sound/core/control.c
index f8c5be4..978fe1a 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -989,7 +989,6 @@
void *tlv_data; /* TLV data */
unsigned long tlv_data_size; /* TLV data size */
void *priv_data; /* private data (like strings for enumerated type) */
- unsigned long priv_data_size; /* size of private data in bytes */
};
static int snd_ctl_elem_user_info(struct snd_kcontrol *kcontrol,
@@ -1001,6 +1000,28 @@
return 0;
}
+static int snd_ctl_elem_user_enum_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct user_element *ue = kcontrol->private_data;
+ const char *names;
+ unsigned int item;
+
+ item = uinfo->value.enumerated.item;
+
+ *uinfo = ue->info;
+
+ item = min(item, uinfo->value.enumerated.items - 1);
+ uinfo->value.enumerated.item = item;
+
+ names = ue->priv_data;
+ for (; item > 0; --item)
+ names += strlen(names) + 1;
+ strcpy(uinfo->value.enumerated.name, names);
+
+ return 0;
+}
+
static int snd_ctl_elem_user_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -1055,11 +1076,46 @@
return change;
}
+static int snd_ctl_elem_init_enum_names(struct user_element *ue)
+{
+ char *names, *p;
+ size_t buf_len, name_len;
+ unsigned int i;
+
+ if (ue->info.value.enumerated.names_length > 64 * 1024)
+ return -EINVAL;
+
+ names = memdup_user(
+ (const void __user *)ue->info.value.enumerated.names_ptr,
+ ue->info.value.enumerated.names_length);
+ if (IS_ERR(names))
+ return PTR_ERR(names);
+
+ /* check that there are enough valid names */
+ buf_len = ue->info.value.enumerated.names_length;
+ p = names;
+ for (i = 0; i < ue->info.value.enumerated.items; ++i) {
+ name_len = strnlen(p, buf_len);
+ if (name_len == 0 || name_len >= 64 || name_len == buf_len) {
+ kfree(names);
+ return -EINVAL;
+ }
+ p += name_len + 1;
+ buf_len -= name_len + 1;
+ }
+
+ ue->priv_data = names;
+ ue->info.value.enumerated.names_ptr = 0;
+
+ return 0;
+}
+
static void snd_ctl_elem_user_free(struct snd_kcontrol *kcontrol)
{
struct user_element *ue = kcontrol->private_data;
- if (ue->tlv_data)
- kfree(ue->tlv_data);
+
+ kfree(ue->tlv_data);
+ kfree(ue->priv_data);
kfree(ue);
}
@@ -1072,8 +1128,8 @@
long private_size;
struct user_element *ue;
int idx, err;
-
- if (card->user_ctl_count >= MAX_USER_CONTROLS)
+
+ if (!replace && card->user_ctl_count >= MAX_USER_CONTROLS)
return -ENOMEM;
if (info->count < 1)
return -EINVAL;
@@ -1101,7 +1157,10 @@
memcpy(&kctl.id, &info->id, sizeof(info->id));
kctl.count = info->owner ? info->owner : 1;
access |= SNDRV_CTL_ELEM_ACCESS_USER;
- kctl.info = snd_ctl_elem_user_info;
+ if (info->type == SNDRV_CTL_ELEM_TYPE_ENUMERATED)
+ kctl.info = snd_ctl_elem_user_enum_info;
+ else
+ kctl.info = snd_ctl_elem_user_info;
if (access & SNDRV_CTL_ELEM_ACCESS_READ)
kctl.get = snd_ctl_elem_user_get;
if (access & SNDRV_CTL_ELEM_ACCESS_WRITE)
@@ -1122,6 +1181,11 @@
if (info->count > 64)
return -EINVAL;
break;
+ case SNDRV_CTL_ELEM_TYPE_ENUMERATED:
+ private_size = sizeof(unsigned int);
+ if (info->count > 128 || info->value.enumerated.items == 0)
+ return -EINVAL;
+ break;
case SNDRV_CTL_ELEM_TYPE_BYTES:
private_size = sizeof(unsigned char);
if (info->count > 512)
@@ -1143,9 +1207,17 @@
ue->info.access = 0;
ue->elem_data = (char *)ue + sizeof(*ue);
ue->elem_data_size = private_size;
+ if (ue->info.type == SNDRV_CTL_ELEM_TYPE_ENUMERATED) {
+ err = snd_ctl_elem_init_enum_names(ue);
+ if (err < 0) {
+ kfree(ue);
+ return err;
+ }
+ }
kctl.private_free = snd_ctl_elem_user_free;
_kctl = snd_ctl_new(&kctl, access);
if (_kctl == NULL) {
+ kfree(ue->priv_data);
kfree(ue);
return -ENOMEM;
}
diff --git a/sound/core/control_compat.c b/sound/core/control_compat.c
index 4268744..2bb95a7 100644
--- a/sound/core/control_compat.c
+++ b/sound/core/control_compat.c
@@ -83,6 +83,8 @@
u32 items;
u32 item;
char name[64];
+ u64 names_ptr;
+ u32 names_length;
} enumerated;
unsigned char reserved[128];
} value;
@@ -372,6 +374,8 @@
&data32->value.enumerated,
sizeof(data->value.enumerated)))
goto error;
+ data->value.enumerated.names_ptr =
+ (uintptr_t)compat_ptr(data->value.enumerated.names_ptr);
break;
default:
break;
diff --git a/sound/core/jack.c b/sound/core/jack.c
index 53b53e9..240a3e1 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -30,6 +30,7 @@
SW_LINEOUT_INSERT,
SW_JACK_PHYSICAL_INSERT,
SW_VIDEOOUT_INSERT,
+ SW_LINEIN_INSERT,
};
static int snd_jack_dev_free(struct snd_device *device)
diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c
index d8359cf..1b5e0c4 100644
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -499,7 +499,7 @@
memset(&id, 0, sizeof(id));
id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
- strcpy(id.name, name);
+ strlcpy(id.name, name, sizeof(id.name));
id.index = index;
return snd_ctl_find_id(card, &id);
}
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 62e90b8..95d1e78 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1399,6 +1399,32 @@
EXPORT_SYMBOL(snd_pcm_hw_constraint_pow2);
+static int snd_pcm_hw_rule_noresample_func(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ unsigned int base_rate = (unsigned int)(uintptr_t)rule->private;
+ struct snd_interval *rate;
+
+ rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
+ return snd_interval_list(rate, 1, &base_rate, 0);
+}
+
+/**
+ * snd_pcm_hw_rule_noresample - add a rule to allow disabling hw resampling
+ * @runtime: PCM runtime instance
+ * @base_rate: the rate at which the hardware does not resample
+ */
+int snd_pcm_hw_rule_noresample(struct snd_pcm_runtime *runtime,
+ unsigned int base_rate)
+{
+ return snd_pcm_hw_rule_add(runtime, SNDRV_PCM_HW_PARAMS_NORESAMPLE,
+ SNDRV_PCM_HW_PARAM_RATE,
+ snd_pcm_hw_rule_noresample_func,
+ (void *)(uintptr_t)base_rate,
+ SNDRV_PCM_HW_PARAM_RATE, -1);
+}
+EXPORT_SYMBOL(snd_pcm_hw_rule_noresample);
+
static void _snd_pcm_hw_param_any(struct snd_pcm_hw_params *params,
snd_pcm_hw_param_t var)
{
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index c74e228..d7d2179 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -2058,16 +2058,12 @@
static int snd_pcm_open_file(struct file *file,
struct snd_pcm *pcm,
- int stream,
- struct snd_pcm_file **rpcm_file)
+ int stream)
{
struct snd_pcm_file *pcm_file;
struct snd_pcm_substream *substream;
int err;
- if (rpcm_file)
- *rpcm_file = NULL;
-
err = snd_pcm_open_substream(pcm, stream, file, &substream);
if (err < 0)
return err;
@@ -2083,8 +2079,7 @@
substream->pcm_release = pcm_release_private;
}
file->private_data = pcm_file;
- if (rpcm_file)
- *rpcm_file = pcm_file;
+
return 0;
}
@@ -2113,7 +2108,6 @@
static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream)
{
int err;
- struct snd_pcm_file *pcm_file;
wait_queue_t wait;
if (pcm == NULL) {
@@ -2131,7 +2125,7 @@
add_wait_queue(&pcm->open_wait, &wait);
mutex_lock(&pcm->open_mutex);
while (1) {
- err = snd_pcm_open_file(file, pcm, stream, &pcm_file);
+ err = snd_pcm_open_file(file, pcm, stream);
if (err >= 0)
break;
if (err == -EAGAIN) {
@@ -3156,8 +3150,8 @@
/*
* mmap the DMA buffer on RAM
*/
-static int snd_pcm_default_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *area)
+int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *area)
{
area->vm_flags |= VM_RESERVED;
#ifdef ARCH_HAS_DMA_MMAP_COHERENT
@@ -3177,6 +3171,7 @@
area->vm_ops = &snd_pcm_vm_ops_data_fault;
return 0;
}
+EXPORT_SYMBOL_GPL(snd_pcm_lib_default_mmap);
/*
* mmap the DMA buffer on I/O memory area
@@ -3242,7 +3237,7 @@
if (substream->ops->mmap)
err = substream->ops->mmap(substream, area);
else
- err = snd_pcm_default_mmap(substream, area);
+ err = snd_pcm_lib_default_mmap(substream, area);
if (!err)
atomic_inc(&substream->mmap_count);
return err;
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c
index a0da775..4067f15 100644
--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -575,7 +575,8 @@
static int loopback_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
- return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+ return snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(params));
}
static int loopback_hw_free(struct snd_pcm_substream *substream)
@@ -587,7 +588,7 @@
mutex_lock(&dpcm->loopback->cable_lock);
cable->valid &= ~(1 << substream->stream);
mutex_unlock(&dpcm->loopback->cable_lock);
- return snd_pcm_lib_free_pages(substream);
+ return snd_pcm_lib_free_vmalloc_buffer(substream);
}
static unsigned int get_cable_index(struct snd_pcm_substream *substream)
@@ -740,6 +741,8 @@
.prepare = loopback_prepare,
.trigger = loopback_trigger,
.pointer = loopback_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
static struct snd_pcm_ops loopback_capture_ops = {
@@ -751,6 +754,8 @@
.prepare = loopback_prepare,
.trigger = loopback_trigger,
.pointer = loopback_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
static int __devinit loopback_pcm_new(struct loopback *loopback,
@@ -771,10 +776,6 @@
strcpy(pcm->name, "Loopback PCM");
loopback->pcm[device] = pcm;
-
- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- 0, 2 * 1024 * 1024);
return 0;
}
diff --git a/sound/drivers/ml403-ac97cr.c b/sound/drivers/ml403-ac97cr.c
index 5cfcb90..2c7a763 100644
--- a/sound/drivers/ml403-ac97cr.c
+++ b/sound/drivers/ml403-ac97cr.c
@@ -1153,7 +1153,7 @@
"0x%x done\n", (unsigned int)ml403_ac97cr->port);
/* get irq */
irq = platform_get_irq(pfdev, 0);
- if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED,
+ if (request_irq(irq, snd_ml403_ac97cr_irq, 0,
dev_name(&pfdev->dev), (void *)ml403_ac97cr)) {
snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": "
"unable to grab IRQ %d\n",
@@ -1166,7 +1166,7 @@
"request (playback) irq %d done\n",
ml403_ac97cr->irq);
irq = platform_get_irq(pfdev, 1);
- if (request_irq(irq, snd_ml403_ac97cr_irq, IRQF_DISABLED,
+ if (request_irq(irq, snd_ml403_ac97cr_irq, 0,
dev_name(&pfdev->dev), (void *)ml403_ac97cr)) {
snd_printk(KERN_ERR SND_ML403_AC97CR_DRIVER ": "
"unable to grab IRQ %d\n",
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index 149d05a..1c02852 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -86,8 +86,7 @@
}
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port[dev], 0,
- irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0,
- NULL);
+ irq[dev], NULL);
if (err < 0) {
printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
goto _err;
diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c
index 2af0999..e91698a 100644
--- a/sound/drivers/mpu401/mpu401_uart.c
+++ b/sound/drivers/mpu401/mpu401_uart.c
@@ -3,7 +3,7 @@
* Routines for control of MPU-401 in UART mode
*
* MPU-401 supports UART mode which is not capable generate transmit
- * interrupts thus output is done via polling. Also, if irq < 0, then
+ * interrupts thus output is done via polling. Without interrupt,
* input is done also via polling. Do not expect good performance.
*
*
@@ -374,7 +374,7 @@
/* first time - flush FIFO */
while (max-- > 0)
mpu->read(mpu, MPU401D(mpu));
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_add_timer(mpu, 1);
}
@@ -383,7 +383,7 @@
snd_mpu401_uart_input_read(mpu);
spin_unlock_irqrestore(&mpu->input_lock, flags);
} else {
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_remove_timer(mpu, 1);
clear_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode);
}
@@ -496,7 +496,7 @@
static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
{
struct snd_mpu401 *mpu = rmidi->private_data;
- if (mpu->irq_flags && mpu->irq >= 0)
+ if (mpu->irq >= 0)
free_irq(mpu->irq, (void *) mpu);
release_and_free_resource(mpu->res);
kfree(mpu);
@@ -509,8 +509,7 @@
* @hardware: the hardware type, MPU401_HW_XXXX
* @port: the base address of MPU401 port
* @info_flags: bitflags MPU401_INFO_XXX
- * @irq: the irq number, -1 if no interrupt for mpu
- * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved.
+ * @irq: the ISA irq number, -1 if not to be allocated
* @rrawmidi: the pointer to store the new rawmidi instance
*
* Creates a new MPU-401 instance.
@@ -525,7 +524,7 @@
unsigned short hardware,
unsigned long port,
unsigned int info_flags,
- int irq, int irq_flags,
+ int irq,
struct snd_rawmidi ** rrawmidi)
{
struct snd_mpu401 *mpu;
@@ -577,8 +576,8 @@
mpu->cport = port + 2;
else
mpu->cport = port + 1;
- if (irq >= 0 && irq_flags) {
- if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags,
+ if (irq >= 0) {
+ if (request_irq(irq, snd_mpu401_uart_interrupt, 0,
"MPU401 UART", (void *) mpu)) {
snd_printk(KERN_ERR "mpu401_uart: "
"unable to grab IRQ %d\n", irq);
@@ -586,9 +585,10 @@
return -EBUSY;
}
}
+ if (irq < 0 && !(info_flags & MPU401_INFO_IRQ_HOOK))
+ info_flags |= MPU401_INFO_USE_TIMER;
mpu->info_flags = info_flags;
mpu->irq = irq;
- mpu->irq_flags = irq_flags;
if (card->shortname[0])
snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI",
card->shortname);
diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c
index 5c426df..1eef4cc 100644
--- a/sound/drivers/mtpav.c
+++ b/sound/drivers/mtpav.c
@@ -589,7 +589,7 @@
return -EBUSY;
}
mcard->port = port;
- if (request_irq(irq, snd_mtpav_irqh, IRQF_DISABLED, "MOTU MTPAV", mcard)) {
+ if (request_irq(irq, snd_mtpav_irqh, 0, "MOTU MTPAV", mcard)) {
snd_printk(KERN_ERR "MTVAP IRQ %d busy\n", irq);
return -EBUSY;
}
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index a25fb7b..fc1d822 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -816,7 +816,7 @@
if (irq >= 0 && irq != SNDRV_AUTO_IRQ) {
if (request_irq(irq, snd_uart16550_interrupt,
- IRQF_DISABLED, "Serial MIDI", uart)) {
+ 0, "Serial MIDI", uart)) {
snd_printk(KERN_WARNING
"irq %d busy. Using Polling.\n", irq);
} else {
diff --git a/sound/firewire/cmp.c b/sound/firewire/cmp.c
index 14cacbc..76294f2 100644
--- a/sound/firewire/cmp.c
+++ b/sound/firewire/cmp.c
@@ -32,7 +32,7 @@
SUCCEED_ON_BUS_RESET,
};
-static __attribute__((format(printf, 2, 3)))
+static __printf(2, 3)
void cmp_error(struct cmp_connection *c, const char *fmt, ...)
{
va_list va;
diff --git a/sound/firewire/isight.c b/sound/firewire/isight.c
index 4400308..cd094ec 100644
--- a/sound/firewire/isight.c
+++ b/sound/firewire/isight.c
@@ -51,7 +51,6 @@
struct fw_unit *unit;
struct fw_device *device;
u64 audio_base;
- struct fw_address_handler iris_handler;
struct snd_pcm_substream *pcm;
struct mutex mutex;
struct iso_packets_buffer buffer;
diff --git a/sound/firewire/speakers.c b/sound/firewire/speakers.c
index 3fc257d..cbe6bb9 100644
--- a/sound/firewire/speakers.c
+++ b/sound/firewire/speakers.c
@@ -778,9 +778,10 @@
{
struct fwspk *fwspk = dev_get_drvdata(dev);
- mutex_lock(&fwspk->mutex);
amdtp_out_stream_pcm_abort(&fwspk->stream);
snd_card_disconnect(fwspk->card);
+
+ mutex_lock(&fwspk->mutex);
fwspk_stop_stream(fwspk);
mutex_unlock(&fwspk->mutex);
@@ -796,8 +797,8 @@
fcp_bus_reset(fwspk->unit);
if (cmp_connection_update(&fwspk->connection) < 0) {
- mutex_lock(&fwspk->mutex);
amdtp_out_stream_pcm_abort(&fwspk->stream);
+ mutex_lock(&fwspk->mutex);
fwspk_stop_stream(fwspk);
mutex_unlock(&fwspk->mutex);
return;
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index 3cb75bc..a87a2b5 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -204,7 +204,7 @@
if (mpu_port[dev] > 0) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED,
+ mpu_port[dev], 0, mpu_irq[dev],
NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", mpu_port[dev]);
}
diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c
index 05aef8b..177eed3 100644
--- a/sound/isa/ad1816a/ad1816a_lib.c
+++ b/sound/isa/ad1816a/ad1816a_lib.c
@@ -595,7 +595,7 @@
snd_ad1816a_free(chip);
return -EBUSY;
}
- if (request_irq(irq, snd_ad1816a_interrupt, IRQF_DISABLED, "AD1816A", (void *) chip)) {
+ if (request_irq(irq, snd_ad1816a_interrupt, 0, "AD1816A", (void *) chip)) {
snd_printk(KERN_ERR "ad1816a: can't grab IRQ %d\n", irq);
snd_ad1816a_free(chip);
return -EBUSY;
diff --git a/sound/isa/als100.c b/sound/isa/als100.c
index 20becc8..706effd 100644
--- a/sound/isa/als100.c
+++ b/sound/isa/als100.c
@@ -256,7 +256,6 @@
mpu_type,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
diff --git a/sound/isa/azt2320.c b/sound/isa/azt2320.c
index aac8dc1..b7bdbf3 100644
--- a/sound/isa/azt2320.c
+++ b/sound/isa/azt2320.c
@@ -234,8 +234,7 @@
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_AZT2320,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index fe79a16..dca69f8 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -597,7 +597,7 @@
if (mpuport[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
mpuport[dev], 0, mpuirq[dev],
- IRQF_DISABLED, NULL) < 0)
+ NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n",
mpuport[dev]);
}
diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c
index cb9153e..409fa0a 100644
--- a/sound/isa/cs423x/cs4231.c
+++ b/sound/isa/cs423x/cs4231.c
@@ -131,7 +131,6 @@
mpu_irq[n] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[n], 0, mpu_irq[n],
- mpu_irq[n] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
dev_warn(dev, "MPU401 not detected\n");
}
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index 999dc1e..0dbde46 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -449,8 +449,7 @@
mpu_irq[dev] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[dev], 0,
- mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
printk(KERN_WARNING IDENT ": MPU401 not detected\n");
}
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index 0cde813..5493e9e 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -174,7 +174,7 @@
chip->mpu_port > 0) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
chip->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ mpu_irq[n], NULL);
if (error < 0)
return error;
}
diff --git a/sound/isa/es1688/es1688_lib.c b/sound/isa/es1688/es1688_lib.c
index 0767620..d3eab6f 100644
--- a/sound/isa/es1688/es1688_lib.c
+++ b/sound/isa/es1688/es1688_lib.c
@@ -661,7 +661,7 @@
snd_printk(KERN_ERR "es1688: can't grab port 0x%lx\n", port + 4);
return -EBUSY;
}
- if (request_irq(irq, snd_es1688_interrupt, IRQF_DISABLED, "ES1688", (void *) chip)) {
+ if (request_irq(irq, snd_es1688_interrupt, 0, "ES1688", (void *) chip)) {
snd_printk(KERN_ERR "es1688: can't grab IRQ %d\n", irq);
return -EBUSY;
}
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index fb4d6b3..bf6ad0b 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -1805,7 +1805,7 @@
return -EBUSY;
}
- if (request_irq(irq, snd_es18xx_interrupt, IRQF_DISABLED, "ES18xx",
+ if (request_irq(irq, snd_es18xx_interrupt, 0, "ES18xx",
(void *) card)) {
snd_es18xx_free(card);
snd_printk(KERN_ERR PFX "unable to grap IRQ %d\n", irq);
@@ -2160,8 +2160,8 @@
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES18XX,
- mpu_port[dev], 0,
- irq[dev], 0, &chip->rmidi);
+ mpu_port[dev], MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
return err;
}
diff --git a/sound/isa/galaxy/galaxy.c b/sound/isa/galaxy/galaxy.c
index ee54df0..e51d3244 100644
--- a/sound/isa/galaxy/galaxy.c
+++ b/sound/isa/galaxy/galaxy.c
@@ -585,8 +585,7 @@
if (mpu_port[n] >= 0) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[n], 0, mpu_irq[n],
- IRQF_DISABLED, NULL);
+ mpu_port[n], 0, mpu_irq[n], NULL);
if (err < 0)
goto error;
}
diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c
index 12eb98f..3167e5a 100644
--- a/sound/isa/gus/gus_main.c
+++ b/sound/isa/gus/gus_main.c
@@ -180,7 +180,7 @@
snd_gus_free(gus);
return -EBUSY;
}
- if (irq >= 0 && request_irq(irq, snd_gus_interrupt, IRQF_DISABLED, "GUS GF1", (void *) gus)) {
+ if (irq >= 0 && request_irq(irq, snd_gus_interrupt, 0, "GUS GF1", (void *) gus)) {
snd_printk(KERN_ERR "gus: can't grab irq %d\n", irq);
snd_gus_free(gus);
return -EBUSY;
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index 008e8e5..c4733c0 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -317,8 +317,7 @@
if (es1688->mpu_port >= 0x300) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
- es1688->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ es1688->mpu_port, 0, mpu_irq[n], NULL);
if (error < 0)
goto out;
}
diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c
index 3e4a58b..c43faa0 100644
--- a/sound/isa/gus/gusmax.c
+++ b/sound/isa/gus/gusmax.c
@@ -291,7 +291,7 @@
goto _err;
}
- if (request_irq(xirq, snd_gusmax_interrupt, IRQF_DISABLED, "GUS MAX", (void *)maxcard)) {
+ if (request_irq(xirq, snd_gusmax_interrupt, 0, "GUS MAX", (void *)maxcard)) {
snd_printk(KERN_ERR PFX "unable to grab IRQ %d\n", xirq);
err = -EBUSY;
goto _err;
diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c
index c7b80e47..5f869a3 100644
--- a/sound/isa/gus/interwave.c
+++ b/sound/isa/gus/interwave.c
@@ -684,7 +684,7 @@
if ((err = snd_gus_initialize(gus)) < 0)
return err;
- if (request_irq(xirq, snd_interwave_interrupt, IRQF_DISABLED,
+ if (request_irq(xirq, snd_interwave_interrupt, 0,
"InterWave", iwcard)) {
snd_printk(KERN_ERR PFX "unable to grab IRQ %d\n", xirq);
return -EBUSY;
diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c
index 91d6023..0961e2c 100644
--- a/sound/isa/msnd/msnd_pinnacle.c
+++ b/sound/isa/msnd/msnd_pinnacle.c
@@ -600,7 +600,7 @@
mpu_io[0],
MPU401_MODE_INPUT |
MPU401_MODE_OUTPUT,
- mpu_irq[0], IRQF_DISABLED,
+ mpu_irq[0],
&chip->rmidi);
if (err < 0) {
printk(KERN_ERR LOGNAME
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 9b915e2..bbafb0b 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -667,7 +667,7 @@
err = snd_opl3sa2_detect(card);
if (err < 0)
return err;
- err = request_irq(xirq, snd_opl3sa2_interrupt, IRQF_DISABLED,
+ err = request_irq(xirq, snd_opl3sa2_interrupt, 0,
"OPL3-SA2", card);
if (err) {
snd_printk(KERN_ERR PFX "can't grab IRQ %d\n", xirq);
@@ -707,8 +707,9 @@
}
if (midi_port[dev] >= 0x300 && midi_port[dev] < 0x340) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_OPL3SA2,
- midi_port[dev], 0,
- xirq, 0, &chip->rmidi)) < 0)
+ midi_port[dev],
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
}
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 8c24102..d94d0f3 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1377,8 +1377,7 @@
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
- &rmidi);
+ mpu_port, 0, miro->mpu_irq, &rmidi);
if (error < 0)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index c35dc68..6dbbfa7 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -892,7 +892,7 @@
#endif
#ifdef OPTi93X
error = request_irq(irq, snd_opti93x_interrupt,
- IRQF_DISABLED, DEV_NAME" - WSS", chip);
+ 0, DEV_NAME" - WSS", chip);
if (error < 0) {
snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", irq);
return error;
@@ -914,7 +914,7 @@
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi);
+ mpu_port, 0, mpu_irq, &rmidi);
if (error)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c
index 8ccbcdd..54e3c2c 100644
--- a/sound/isa/sb/jazz16.c
+++ b/sound/isa/sb/jazz16.c
@@ -322,7 +322,6 @@
MPU401_HW_MPU401,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx\n",
mpu_port[dev]);
diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c
index 4d1c5a3..237f8bd 100644
--- a/sound/isa/sb/sb16.c
+++ b/sound/isa/sb/sb16.c
@@ -394,8 +394,9 @@
if (chip->mpu_port > 0 && chip->mpu_port != SNDRV_AUTO_PORT) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SB,
- chip->mpu_port, 0,
- xirq, 0, &chip->rmidi)) < 0)
+ chip->mpu_port,
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
chip->rmidi_callback = snd_mpu401_uart_interrupt;
}
diff --git a/sound/isa/sb/sb_common.c b/sound/isa/sb/sb_common.c
index eae6c1c..d2e1921 100644
--- a/sound/isa/sb/sb_common.c
+++ b/sound/isa/sb/sb_common.c
@@ -240,7 +240,7 @@
if (request_irq(irq, irq_handler,
(hardware == SB_HW_ALS4000 ||
hardware == SB_HW_CS5530) ?
- IRQF_SHARED : IRQF_DISABLED,
+ IRQF_SHARED : 0,
"SoundBlaster", (void *) chip)) {
snd_printk(KERN_ERR "sb: can't grab irq %d\n", irq);
snd_sbdsp_free(chip);
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
index 9a8bbf6..207c161 100644
--- a/sound/isa/sc6000.c
+++ b/sound/isa/sc6000.c
@@ -658,8 +658,7 @@
if (snd_mpu401_uart_new(card, 0,
MPU401_HW_MPU401,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
mpu_port[dev]);
}
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index e2d5d2d..f2379e1 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -825,8 +825,7 @@
int err;
err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
- MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
- &rawmidi);
+ MPU401_INFO_INTEGRATED, irq, &rawmidi);
if (err == 0) {
struct snd_mpu401 *mpu = rawmidi->private_data;
mpu->open_input = mpu401_open;
diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c
index 711670e..8714297 100644
--- a/sound/isa/wavefront/wavefront.c
+++ b/sound/isa/wavefront/wavefront.c
@@ -418,7 +418,7 @@
return -EBUSY;
}
if (request_irq(ics2115_irq[dev], snd_wavefront_ics2115_interrupt,
- IRQF_DISABLED, "ICS2115", acard)) {
+ 0, "ICS2115", acard)) {
snd_printk(KERN_ERR "unable to use ICS2115 IRQ %d\n", ics2115_irq[dev]);
return -EBUSY;
}
@@ -449,8 +449,7 @@
if (cs4232_mpu_port[dev] > 0 && cs4232_mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, midi_dev, MPU401_HW_CS4232,
cs4232_mpu_port[dev], 0,
- cs4232_mpu_irq[dev], IRQF_DISABLED,
- NULL);
+ cs4232_mpu_irq[dev], NULL);
if (err < 0) {
snd_printk (KERN_ERR "can't allocate CS4232 MPU-401 device\n");
return err;
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 2a42cc3..7277c5b 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -1833,7 +1833,7 @@
}
chip->cport = cport;
if (!(hwshare & WSS_HWSHARE_IRQ))
- if (request_irq(irq, snd_wss_interrupt, IRQF_DISABLED,
+ if (request_irq(irq, snd_wss_interrupt, 0,
"WSS", (void *) chip)) {
snd_printk(KERN_ERR "wss: can't grab IRQ %d\n", irq);
snd_wss_free(chip);
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index a9823fa..77dd0a1 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -23,12 +23,15 @@
config SND_AU1X00
- tristate "Au1x00 AC97 Port Driver"
+ tristate "Au1x00 AC97 Port Driver (DEPRECATED)"
depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500
select SND_PCM
select SND_AC97_CODEC
help
ALSA Sound driver for the Au1x00's AC97 port.
+ Newer drivers for ASoC are available, please do not use
+ this driver as it will be removed in the future.
+
endif # SND_MIPS
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index 446cf97..7567ebd 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -465,13 +465,13 @@
flags = claim_dma_lock();
if ((au1000->stream[PLAYBACK]->dma = request_au1000_dma(DMA_ID_AC97C_TX,
- "AC97 TX", au1000_dma_interrupt, IRQF_DISABLED,
+ "AC97 TX", au1000_dma_interrupt, 0,
au1000->stream[PLAYBACK])) < 0) {
release_dma_lock(flags);
return -EBUSY;
}
if ((au1000->stream[CAPTURE]->dma = request_au1000_dma(DMA_ID_AC97C_RX,
- "AC97 RX", au1000_dma_interrupt, IRQF_DISABLED,
+ "AC97 RX", au1000_dma_interrupt, 0,
au1000->stream[CAPTURE])) < 0){
release_dma_lock(flags);
return -EBUSY;
diff --git a/sound/oss/sound_timer.c b/sound/oss/sound_timer.c
index 48cda6c..8021c85 100644
--- a/sound/oss/sound_timer.c
+++ b/sound/oss/sound_timer.c
@@ -320,7 +320,7 @@
n = sound_alloc_timerdev();
if (n == -1)
n = 0; /* Overwrite the system timer */
- strcpy(sound_timer.info.name, name);
+ strlcpy(sound_timer.info.name, name, sizeof(sound_timer.info.name));
sound_timer_devs[n] = &sound_timer;
}
EXPORT_SYMBOL(sound_timer_init);
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index a9c1af3..0462869 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -931,8 +931,9 @@
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_ALS4000,
iobase + ALS4K_IOB_30_MIDI_DATA,
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n",
iobase + ALS4K_IOB_30_MIDI_DATA);
goto out_err;
diff --git a/sound/pci/au88x0/au88x0_mpu401.c b/sound/pci/au88x0/au88x0_mpu401.c
index 0dc8d25..e6c6a0f 100644
--- a/sound/pci/au88x0/au88x0_mpu401.c
+++ b/sound/pci/au88x0/au88x0_mpu401.c
@@ -84,7 +84,7 @@
#ifdef VORTEX_MPU401_LEGACY
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_MPU401, 0x330,
- 0, 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
@@ -94,8 +94,8 @@
port = (unsigned long)(vortex->mmio + VORTEX_MIDI_DATA);
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port,
- MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO,
- 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO |
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 579fc0dce..d24fe42 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -2652,8 +2652,9 @@
since our hardware ought to be similar, thus use same ID. */
err = snd_mpu401_uart_new(
card, 0,
- MPU401_HW_AZT2320, chip->mpu_io, MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi
+ MPU401_HW_AZT2320, chip->mpu_io,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi
);
if (err < 0) {
snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n",
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 9cf99fb..da9c732 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -3228,8 +3228,9 @@
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
iomidi,
(integrated_midi ?
- MPU401_INFO_INTEGRATED : 0),
- cm->irq, 0, &cm->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED : 0) |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &cm->rmidi)) < 0) {
printk(KERN_ERR "cmipci: no UART401 device at 0x%lx\n", iomidi);
}
}
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
index 457d211..2c86226 100644
--- a/sound/pci/ctxfi/ctpcm.c
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -404,7 +404,7 @@
int err;
int playback_count, capture_count;
- playback_count = (IEC958 == device) ? 1 : 8;
+ playback_count = (IEC958 == device) ? 1 : 256;
capture_count = (FRONT == device) ? 1 : 0;
err = snd_pcm_new(atc->card, "ctxfi", device,
playback_count, capture_count, &pcm);
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
index c749fa7..e134b3a 100644
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -20,7 +20,7 @@
#include "cthardware.h"
#include <linux/slab.h>
-#define SRC_RESOURCE_NUM 64
+#define SRC_RESOURCE_NUM 256
#define SRCIMP_RESOURCE_NUM 256
static unsigned int conj_mask;
diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h
index b23adfc..e6da60e 100644
--- a/sound/pci/ctxfi/ctvmem.h
+++ b/sound/pci/ctxfi/ctvmem.h
@@ -18,7 +18,7 @@
#ifndef CTVMEM_H
#define CTVMEM_H
-#define CT_PTP_NUM 1 /* num of device page table pages */
+#define CT_PTP_NUM 4 /* num of device page table pages */
#include <linux/mutex.h>
#include <linux/list.h>
diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c
index 622bace..e22b8e2 100644
--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -1146,6 +1146,11 @@
kfree(epcm);
return err;
}
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0) {
+ kfree(epcm);
+ return err;
+ }
mix = &emu->pcm_mixer[substream->number];
for (i = 0; i < 4; i++)
mix->send_routing[0][i] = mix->send_routing[1][i] = mix->send_routing[2][i] = i;
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 26a5a2f..718a264 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -1854,8 +1854,9 @@
}
}
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- chip->mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ chip->mpu_port,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi) < 0) {
printk(KERN_ERR "es1938: unable to initialize MPU-401\n");
} else {
// this line is vital for MIDI interrupt handling on ess-solo1
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 99ea932..407e4ab 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2843,8 +2843,9 @@
if (enable_mpu[dev]) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
chip->io_port + ESM_MPU401_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_WARNING "es1968: skipping MPU-401 MIDI support..\n");
}
}
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 32b02d9..136f723 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -729,11 +729,14 @@
{ .data = 2, .clk = 0, .wren = 1, .most = 3, .name = "SF64-PCR" },
};
+#define get_tea575x_gpio(chip) \
+ (&snd_fm801_tea575x_gpios[((chip)->tea575x_tuner & TUNER_TYPE_MASK) - 1])
+
static void snd_fm801_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
{
struct fm801 *chip = tea->private_data;
unsigned short reg = inw(FM801_REG(chip, GPIO_CTRL));
- struct snd_fm801_tea575x_gpio gpio = snd_fm801_tea575x_gpios[(chip->tea575x_tuner & TUNER_TYPE_MASK) - 1];
+ struct snd_fm801_tea575x_gpio gpio = *get_tea575x_gpio(chip);
reg &= ~(FM801_GPIO_GP(gpio.data) |
FM801_GPIO_GP(gpio.clk) |
@@ -751,7 +754,7 @@
{
struct fm801 *chip = tea->private_data;
unsigned short reg = inw(FM801_REG(chip, GPIO_CTRL));
- struct snd_fm801_tea575x_gpio gpio = snd_fm801_tea575x_gpios[(chip->tea575x_tuner & TUNER_TYPE_MASK) - 1];
+ struct snd_fm801_tea575x_gpio gpio = *get_tea575x_gpio(chip);
return (reg & FM801_GPIO_GP(gpio.data)) ? TEA575X_DATA : 0 |
(reg & FM801_GPIO_GP(gpio.most)) ? TEA575X_MOST : 0;
@@ -761,7 +764,7 @@
{
struct fm801 *chip = tea->private_data;
unsigned short reg = inw(FM801_REG(chip, GPIO_CTRL));
- struct snd_fm801_tea575x_gpio gpio = snd_fm801_tea575x_gpios[(chip->tea575x_tuner & TUNER_TYPE_MASK) - 1];
+ struct snd_fm801_tea575x_gpio gpio = *get_tea575x_gpio(chip);
/* use GPIO lines and set write enable bit */
reg |= FM801_GPIO_GS(gpio.data) |
@@ -1246,7 +1249,7 @@
chip->tea575x_tuner = tea575x_tuner;
if (!snd_tea575x_init(&chip->tea)) {
snd_printk(KERN_INFO "detected TEA575x radio type %s\n",
- snd_fm801_tea575x_gpios[tea575x_tuner - 1].name);
+ get_tea575x_gpio(chip)->name);
break;
}
}
@@ -1256,9 +1259,7 @@
}
}
if (!(chip->tea575x_tuner & TUNER_DISABLED)) {
- strlcpy(chip->tea.card,
- snd_fm801_tea575x_gpios[(tea575x_tuner &
- TUNER_TYPE_MASK) - 1].name,
+ strlcpy(chip->tea.card, get_tea575x_gpio(chip)->name,
sizeof(chip->tea.card));
}
#endif
@@ -1311,8 +1312,9 @@
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_FM801,
FM801_REG(chip, MPU401_DATA),
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 87365d5..f928d66 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -6,6 +6,9 @@
snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
+# for trace-points
+CFLAGS_hda_codec.o := -I$(src)
+
snd-hda-codec-realtek-objs := patch_realtek.o
snd-hda-codec-cmedia-objs := patch_cmedia.o
snd-hda-codec-analog-objs := patch_analog.o
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
index 21ec2cb..3b5170b 100644
--- a/sound/pci/hda/alc260_quirks.c
+++ b/sound/pci/hda/alc260_quirks.c
@@ -7,9 +7,6 @@
enum {
ALC260_AUTO,
ALC260_BASIC,
- ALC260_HP,
- ALC260_HP_DC7600,
- ALC260_HP_3013,
ALC260_FUJITSU_S702X,
ALC260_ACER,
ALC260_WILL,
@@ -142,8 +139,6 @@
/* Mixer combinations
*
* basic: base_output + input + pc_beep + capture
- * HP: base_output + input + capture_alt
- * HP_3013: hp_3013 + input + capture
* fujitsu: fujitsu + capture
* acer: acer + capture
*/
@@ -170,145 +165,6 @@
{ } /* end */
};
-/* update HP, line and mono out pins according to the master switch */
-static void alc260_hp_master_update(struct hda_codec *codec)
-{
- update_speakers(codec);
-}
-
-static int alc260_hp_master_sw_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct alc_spec *spec = codec->spec;
- *ucontrol->value.integer.value = !spec->master_mute;
- return 0;
-}
-
-static int alc260_hp_master_sw_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct alc_spec *spec = codec->spec;
- int val = !*ucontrol->value.integer.value;
-
- if (val == spec->master_mute)
- return 0;
- spec->master_mute = val;
- alc260_hp_master_update(codec);
- return 1;
-}
-
-static const struct snd_kcontrol_new alc260_hp_output_mixer[] = {
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
- .info = snd_ctl_boolean_mono_info,
- .get = alc260_hp_master_sw_get,
- .put = alc260_hp_master_sw_put,
- },
- HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
- HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, HDA_INPUT),
- { } /* end */
-};
-
-static const struct hda_verb alc260_hp_unsol_verbs[] = {
- {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {},
-};
-
-static void alc260_hp_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x0f;
- spec->autocfg.speaker_pins[0] = 0x10;
- spec->autocfg.speaker_pins[1] = 0x11;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
-static const struct snd_kcontrol_new alc260_hp_3013_mixer[] = {
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
- .info = snd_ctl_boolean_mono_info,
- .get = alc260_hp_master_sw_get,
- .put = alc260_hp_master_sw_put,
- },
- HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT),
- HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
-static void alc260_hp_3013_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x10;
- spec->autocfg.speaker_pins[1] = 0x11;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
-static const struct hda_bind_ctls alc260_dc7600_bind_master_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x0a, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct hda_bind_ctls alc260_dc7600_bind_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x11, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct snd_kcontrol_new alc260_hp_dc7600_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume", &alc260_dc7600_bind_master_vol),
- HDA_BIND_SW("LineOut Playback Switch", &alc260_dc7600_bind_switch),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x0f, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
-static const struct hda_verb alc260_hp_3013_unsol_verbs[] = {
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {},
-};
-
-static void alc260_hp_3012_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x10;
- spec->autocfg.speaker_pins[0] = 0x0f;
- spec->autocfg.speaker_pins[1] = 0x11;
- spec->autocfg.speaker_pins[2] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
/* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12,
* HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10.
*/
@@ -480,106 +336,6 @@
{ }
};
-#if 0 /* should be identical with alc260_init_verbs? */
-static const struct hda_verb alc260_hp_init_verbs[] = {
- /* Headphone and output */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
- /* mono output */
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- /* Mic1 (rear panel) pin widget for input and vref at 80% */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- /* Mic2 (front panel) pin widget for input and vref at 80% */
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- /* Line In pin widget for input */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* Line-2 pin widget for output */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- /* CD pin widget for input */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* unmute amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
- /* set connection select to line in (default select for this ADC) */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* unmute Line-Out mixer amp left and right (volume = 0) */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
- /* mute pin widget amp left and right (no gain on this amp) */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
- /* unmute HP mixer amp left and right (volume = 0) */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
- /* mute pin widget amp left and right (no gain on this amp) */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
- * Line In 2 = 0x03
- */
- /* mute analog inputs */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
- /* Unmute Front out path */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- /* Unmute Headphone out path */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- /* Unmute Mono out path */
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- { }
-};
-#endif
-
-static const struct hda_verb alc260_hp_3013_init_verbs[] = {
- /* Line out and output */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- /* mono output */
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- /* Mic1 (rear panel) pin widget for input and vref at 80% */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- /* Mic2 (front panel) pin widget for input and vref at 80% */
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- /* Line In pin widget for input */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* Headphone pin widget for output */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
- /* CD pin widget for input */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- /* unmute amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
- /* set connection select to line in (default select for this ADC) */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* unmute Line-Out mixer amp left and right (volume = 0) */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
- /* mute pin widget amp left and right (no gain on this amp) */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
- /* unmute HP mixer amp left and right (volume = 0) */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
- /* mute pin widget amp left and right (no gain on this amp) */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
- * Line In 2 = 0x03
- */
- /* mute analog inputs */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
- /* Unmute Front out path */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- /* Unmute Headphone out path */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- /* Unmute Mono out path */
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- { }
-};
-
/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
* laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
* audio = 0x16, internal speaker = 0x10.
@@ -1093,9 +849,6 @@
*/
static const char * const alc260_models[ALC260_MODEL_LAST] = {
[ALC260_BASIC] = "basic",
- [ALC260_HP] = "hp",
- [ALC260_HP_3013] = "hp-3013",
- [ALC260_HP_DC7600] = "hp-dc7600",
[ALC260_FUJITSU_S702X] = "fujitsu",
[ALC260_ACER] = "acer",
[ALC260_WILL] = "will",
@@ -1112,15 +865,6 @@
SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL),
SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
- SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013),
- SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */
- SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
- SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013),
- SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600),
- SND_PCI_QUIRK(0x103c, 0x3013, "HP", ALC260_HP_3013),
- SND_PCI_QUIRK(0x103c, 0x3014, "HP", ALC260_HP),
- SND_PCI_QUIRK(0x103c, 0x3015, "HP", ALC260_HP),
- SND_PCI_QUIRK(0x103c, 0x3016, "HP", ALC260_HP),
SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
@@ -1144,54 +888,6 @@
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
},
- [ALC260_HP] = {
- .mixers = { alc260_hp_output_mixer,
- alc260_input_mixer },
- .init_verbs = { alc260_init_verbs,
- alc260_hp_unsol_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
- .adc_nids = alc260_adc_nids_alt,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .input_mux = &alc260_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc260_hp_setup,
- .init_hook = alc_inithook,
- },
- [ALC260_HP_DC7600] = {
- .mixers = { alc260_hp_dc7600_mixer,
- alc260_input_mixer },
- .init_verbs = { alc260_init_verbs,
- alc260_hp_dc7600_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
- .adc_nids = alc260_adc_nids_alt,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .input_mux = &alc260_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc260_hp_3012_setup,
- .init_hook = alc_inithook,
- },
- [ALC260_HP_3013] = {
- .mixers = { alc260_hp_3013_mixer,
- alc260_input_mixer },
- .init_verbs = { alc260_hp_3013_init_verbs,
- alc260_hp_3013_unsol_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
- .adc_nids = alc260_adc_nids_alt,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .input_mux = &alc260_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc260_hp_3013_setup,
- .init_hook = alc_inithook,
- },
[ALC260_FUJITSU_S702X] = {
.mixers = { alc260_fujitsu_mixer },
.init_verbs = { alc260_fujitsu_init_verbs },
diff --git a/sound/pci/hda/alc262_quirks.c b/sound/pci/hda/alc262_quirks.c
index 8d2097d..7894b2b 100644
--- a/sound/pci/hda/alc262_quirks.c
+++ b/sound/pci/hda/alc262_quirks.c
@@ -10,13 +10,7 @@
ALC262_HIPPO,
ALC262_HIPPO_1,
ALC262_FUJITSU,
- ALC262_HP_BPC,
- ALC262_HP_BPC_D7000_WL,
- ALC262_HP_BPC_D7000_WF,
- ALC262_HP_TC_T5735,
- ALC262_HP_RP5700,
ALC262_BENQ_ED8,
- ALC262_SONY_ASSAMD,
ALC262_BENQ_T31,
ALC262_ULTRA,
ALC262_LENOVO_3000,
@@ -66,163 +60,30 @@
{ } /* end */
};
-/* update HP, line and mono-out pins according to the master switch */
-#define alc262_hp_master_update alc260_hp_master_update
-
-static void alc262_hp_bpc_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x1b;
- spec->autocfg.speaker_pins[0] = 0x16;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
-static void alc262_hp_wildwest_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x16;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
-#define alc262_hp_master_sw_get alc260_hp_master_sw_get
-#define alc262_hp_master_sw_put alc260_hp_master_sw_put
-
-#define ALC262_HP_MASTER_SWITCH \
- { \
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = "Master Playback Switch", \
- .info = snd_ctl_boolean_mono_info, \
- .get = alc262_hp_master_sw_get, \
- .put = alc262_hp_master_sw_put, \
- }, \
- { \
- .iface = NID_MAPPING, \
- .name = "Master Playback Switch", \
- .private_value = 0x15 | (0x16 << 8) | (0x1b << 16), \
- }
-
-
-static const struct snd_kcontrol_new alc262_HP_BPC_mixer[] = {
- ALC262_HP_MASTER_SWITCH,
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0e, 2, 0x0,
- HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x16, 2, 0x0,
- HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("AUX IN Playback Volume", 0x0b, 0x06, HDA_INPUT),
- HDA_CODEC_MUTE("AUX IN Playback Switch", 0x0b, 0x06, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc262_HP_BPC_WildWest_mixer[] = {
- ALC262_HP_MASTER_SWITCH,
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0e, 2, 0x0,
- HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Speaker Playback Switch", 0x16, 2, 0x0,
- HDA_OUTPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x1a, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc262_HP_BPC_WildWest_option_mixer[] = {
- HDA_CODEC_VOLUME("Rear Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Rear Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Rear Mic Boost Volume", 0x18, 0, HDA_INPUT),
- { } /* end */
-};
-
-/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hp_t5735_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
-static const struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct hda_verb alc262_hp_t5735_verbs[] = {
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- { }
-};
-
-static const struct snd_kcontrol_new alc262_hp_rp5700_mixer[] = {
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0e, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x16, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
- { } /* end */
-};
-
-static const struct hda_verb alc262_hp_rp5700_verbs[] = {
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x00 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x00 << 8))},
- {}
-};
-
-static const struct hda_input_mux alc262_hp_rp5700_capture_source = {
- .num_items = 1,
- .items = {
- { "Line", 0x1 },
- },
-};
-
/* bind hp and internal speaker mute (with plug check) as master switch */
-#define alc262_hippo_master_update alc262_hp_master_update
-#define alc262_hippo_master_sw_get alc262_hp_master_sw_get
-#define alc262_hippo_master_sw_put alc262_hp_master_sw_put
+
+static int alc262_hippo_master_sw_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ *ucontrol->value.integer.value = !spec->master_mute;
+ return 0;
+}
+
+static int alc262_hippo_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ int val = !*ucontrol->value.integer.value;
+
+ if (val == spec->master_mute)
+ return 0;
+ spec->master_mute = val;
+ update_outputs(codec);
+ return 1;
+}
#define ALC262_HIPPO_MASTER_SWITCH \
{ \
@@ -239,6 +100,9 @@
(SUBDEV_SPEAKER(0) << 16), \
}
+#define alc262_hp_master_sw_get alc262_hippo_master_sw_get
+#define alc262_hp_master_sw_put alc262_hippo_master_sw_put
+
static const struct snd_kcontrol_new alc262_hippo_mixer[] = {
ALC262_HIPPO_MASTER_SWITCH,
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -279,8 +143,7 @@
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc262_hippo1_setup(struct hda_codec *codec)
@@ -289,8 +152,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
@@ -353,8 +215,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
@@ -496,8 +357,7 @@
spec->ext_mic_pin = 0x18;
spec->int_mic_pin = 0x12;
spec->auto_mic = 1;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_PIN);
}
/*
@@ -571,27 +431,6 @@
},
};
-static const struct hda_input_mux alc262_HP_capture_source = {
- .num_items = 5,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- { "AUX IN", 0x6 },
- },
-};
-
-static const struct hda_input_mux alc262_HP_D7000_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x2 },
- { "Line", 0x1 },
- { "CD", 0x4 },
- },
-};
-
static void alc262_fujitsu_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -599,8 +438,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.hp_pins[1] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
/* bind volumes of both NID 0x0c and 0x0d */
@@ -646,8 +484,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct snd_kcontrol_new alc262_lenovo_3000_mixer[] = {
@@ -752,8 +589,8 @@
mute = 0;
/* auto-mute only when HP is used as HP */
if (!spec->cur_mux[0]) {
- spec->jack_present = snd_hda_jack_detect(codec, 0x15);
- if (spec->jack_present)
+ spec->hp_jack_present = snd_hda_jack_detect(codec, 0x15);
+ if (spec->hp_jack_present)
mute = HDA_AMP_MUTE;
}
/* mute/unmute internal speaker */
@@ -817,206 +654,6 @@
{ } /* end */
};
-static const struct hda_verb alc262_HP_BPC_init_verbs[] = {
- /*
- * Unmute ADC0-2 and set the default input to mic-in
- */
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for
- * front panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)},
-
- /*
- * Set up output mixers (0x0c - 0x0e)
- */
- /* set vol=0 to output mixers */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
-
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
-
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
-
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
-
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 0b, 12 */
- /* Input mixer1: only unmute Mic */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
- /* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
- /* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x05 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x06 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x07 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x08 << 8))},
-
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
-
- { }
-};
-
-static const struct hda_verb alc262_HP_BPC_WildWest_init_verbs[] = {
- /*
- * Unmute ADC0-2 and set the default input to mic-in
- */
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front
- * panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)},
- /*
- * Set up output mixers (0x0c - 0x0e)
- */
- /* set vol=0 to output mixers */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
-
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* HP */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Mono */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* rear MIC */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* Line in */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Front MIC */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Line out */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* CD in */
-
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
-
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
-
- /* {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 }, */
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 },
- {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
- {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 },
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, /*rear MIC*/
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, /*Line in*/
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, /*F MIC*/
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, /*Front*/
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, /*CD*/
- /* {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x06 << 8))}, */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x07 << 8))}, /*HP*/
- /* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
- /* {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x06 << 8))}, */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x07 << 8))},
- /* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
- /* {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x06 << 8))}, */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x07 << 8))},
-
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
-
- { }
-};
-
static const struct hda_verb alc262_toshiba_rx1_unsol_verbs[] = {
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Front Speaker */
@@ -1042,13 +679,8 @@
[ALC262_HIPPO] = "hippo",
[ALC262_HIPPO_1] = "hippo_1",
[ALC262_FUJITSU] = "fujitsu",
- [ALC262_HP_BPC] = "hp-bpc",
- [ALC262_HP_BPC_D7000_WL]= "hp-bpc-d7000",
- [ALC262_HP_TC_T5735] = "hp-tc-t5735",
- [ALC262_HP_RP5700] = "hp-rp5700",
[ALC262_BENQ_ED8] = "benq",
[ALC262_BENQ_T31] = "benq-t31",
- [ALC262_SONY_ASSAMD] = "sony-assamd",
[ALC262_TOSHIBA_S06] = "toshiba-s06",
[ALC262_TOSHIBA_RX1] = "toshiba-rx1",
[ALC262_ULTRA] = "ultra",
@@ -1061,41 +693,6 @@
static const struct snd_pci_quirk alc262_cfg_tbl[] = {
SND_PCI_QUIRK(0x1002, 0x437b, "Hippo", ALC262_HIPPO),
SND_PCI_QUIRK(0x1033, 0x8895, "NEC Versa S9100", ALC262_NEC),
- SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1200, "HP xw series",
- ALC262_HP_BPC),
- SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1300, "HP xw series",
- ALC262_HP_BPC),
- SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1500, "HP z series",
- ALC262_HP_BPC),
- SND_PCI_QUIRK(0x103c, 0x170b, "HP Z200",
- ALC262_AUTO),
- SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1700, "HP xw series",
- ALC262_HP_BPC),
- SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
- SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF),
- SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL),
- SND_PCI_QUIRK(0x103c, 0x2803, "HP D7000", ALC262_HP_BPC_D7000_WF),
- SND_PCI_QUIRK(0x103c, 0x2804, "HP D7000", ALC262_HP_BPC_D7000_WL),
- SND_PCI_QUIRK(0x103c, 0x2805, "HP D7000", ALC262_HP_BPC_D7000_WF),
- SND_PCI_QUIRK(0x103c, 0x2806, "HP D7000", ALC262_HP_BPC_D7000_WL),
- SND_PCI_QUIRK(0x103c, 0x2807, "HP D7000", ALC262_HP_BPC_D7000_WF),
- SND_PCI_QUIRK(0x103c, 0x280c, "HP xw4400", ALC262_HP_BPC),
- SND_PCI_QUIRK(0x103c, 0x3014, "HP xw6400", ALC262_HP_BPC),
- SND_PCI_QUIRK(0x103c, 0x3015, "HP xw8400", ALC262_HP_BPC),
- SND_PCI_QUIRK(0x103c, 0x302f, "HP Thin Client T5735",
- ALC262_HP_TC_T5735),
- SND_PCI_QUIRK(0x103c, 0x2817, "HP RP5700", ALC262_HP_RP5700),
- SND_PCI_QUIRK(0x104d, 0x1f00, "Sony ASSAMD", ALC262_SONY_ASSAMD),
- SND_PCI_QUIRK(0x104d, 0x8203, "Sony UX-90", ALC262_HIPPO),
- SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD),
- SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */
- SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06),
- SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO),
- SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO),
-#if 0 /* disable the quirk since model=auto works better in recent versions */
- SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO",
- ALC262_SONY_ASSAMD),
-#endif
SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
ALC262_TOSHIBA_RX1),
SND_PCI_QUIRK(0x1179, 0xff7b, "Toshiba S06", ALC262_TOSHIBA_S06),
@@ -1166,68 +763,6 @@
.setup = alc262_fujitsu_setup,
.init_hook = alc_inithook,
},
- [ALC262_HP_BPC] = {
- .mixers = { alc262_HP_BPC_mixer },
- .init_verbs = { alc262_HP_BPC_init_verbs },
- .num_dacs = ARRAY_SIZE(alc262_dac_nids),
- .dac_nids = alc262_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc262_modes),
- .channel_mode = alc262_modes,
- .input_mux = &alc262_HP_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc262_hp_bpc_setup,
- .init_hook = alc_inithook,
- },
- [ALC262_HP_BPC_D7000_WF] = {
- .mixers = { alc262_HP_BPC_WildWest_mixer },
- .init_verbs = { alc262_HP_BPC_WildWest_init_verbs },
- .num_dacs = ARRAY_SIZE(alc262_dac_nids),
- .dac_nids = alc262_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc262_modes),
- .channel_mode = alc262_modes,
- .input_mux = &alc262_HP_D7000_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc262_hp_wildwest_setup,
- .init_hook = alc_inithook,
- },
- [ALC262_HP_BPC_D7000_WL] = {
- .mixers = { alc262_HP_BPC_WildWest_mixer,
- alc262_HP_BPC_WildWest_option_mixer },
- .init_verbs = { alc262_HP_BPC_WildWest_init_verbs },
- .num_dacs = ARRAY_SIZE(alc262_dac_nids),
- .dac_nids = alc262_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc262_modes),
- .channel_mode = alc262_modes,
- .input_mux = &alc262_HP_D7000_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc262_hp_wildwest_setup,
- .init_hook = alc_inithook,
- },
- [ALC262_HP_TC_T5735] = {
- .mixers = { alc262_hp_t5735_mixer },
- .init_verbs = { alc262_init_verbs, alc262_hp_t5735_verbs },
- .num_dacs = ARRAY_SIZE(alc262_dac_nids),
- .dac_nids = alc262_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc262_modes),
- .channel_mode = alc262_modes,
- .input_mux = &alc262_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc262_hp_t5735_setup,
- .init_hook = alc_inithook,
- },
- [ALC262_HP_RP5700] = {
- .mixers = { alc262_hp_rp5700_mixer },
- .init_verbs = { alc262_init_verbs, alc262_hp_rp5700_verbs },
- .num_dacs = ARRAY_SIZE(alc262_dac_nids),
- .dac_nids = alc262_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc262_modes),
- .channel_mode = alc262_modes,
- .input_mux = &alc262_hp_rp5700_capture_source,
- },
[ALC262_BENQ_ED8] = {
.mixers = { alc262_base_mixer },
.init_verbs = { alc262_init_verbs, alc262_EAPD_verbs },
@@ -1238,19 +773,6 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
},
- [ALC262_SONY_ASSAMD] = {
- .mixers = { alc262_sony_mixer },
- .init_verbs = { alc262_init_verbs, alc262_sony_unsol_verbs},
- .num_dacs = ARRAY_SIZE(alc262_dac_nids),
- .dac_nids = alc262_dac_nids,
- .hp_nid = 0x02,
- .num_channel_mode = ARRAY_SIZE(alc262_modes),
- .channel_mode = alc262_modes,
- .input_mux = &alc262_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc262_hippo_setup,
- .init_hook = alc_inithook,
- },
[ALC262_BENQ_T31] = {
.mixers = { alc262_benq_t31_mixer },
.init_verbs = { alc262_init_verbs, alc262_benq_t31_EAPD_verbs,
diff --git a/sound/pci/hda/alc268_quirks.c b/sound/pci/hda/alc268_quirks.c
deleted file mode 100644
index 2e5876c..0000000
--- a/sound/pci/hda/alc268_quirks.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * ALC267/ALC268 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC268 models */
-enum {
- ALC268_AUTO,
- ALC267_QUANTA_IL1,
- ALC268_3ST,
- ALC268_TOSHIBA,
- ALC268_ACER,
- ALC268_ACER_DMIC,
- ALC268_ACER_ASPIRE_ONE,
- ALC268_DELL,
- ALC268_ZEPTO,
-#ifdef CONFIG_SND_DEBUG
- ALC268_TEST,
-#endif
- ALC268_MODEL_LAST /* last tag */
-};
-
-/*
- * ALC268 channel source setting (2 channel)
- */
-#define ALC268_DIGOUT_NID ALC880_DIGOUT_NID
-#define alc268_modes alc260_modes
-
-static const hda_nid_t alc268_dac_nids[2] = {
- /* front, hp */
- 0x02, 0x03
-};
-
-static const hda_nid_t alc268_adc_nids[2] = {
- /* ADC0-1 */
- 0x08, 0x07
-};
-
-static const hda_nid_t alc268_adc_nids_alt[1] = {
- /* ADC0 */
- 0x08
-};
-
-static const hda_nid_t alc268_capsrc_nids[2] = { 0x23, 0x24 };
-
-static const struct snd_kcontrol_new alc268_base_mixer[] = {
- /* output mixer control */
- HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line In Boost Volume", 0x1a, 0, HDA_INPUT),
- { }
-};
-
-static const struct snd_kcontrol_new alc268_toshiba_mixer[] = {
- /* output mixer control */
- HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
- ALC262_HIPPO_MASTER_SWITCH,
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line In Boost Volume", 0x1a, 0, HDA_INPUT),
- { }
-};
-
-static const struct hda_verb alc268_eapd_verbs[] = {
- {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
- {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
- { }
-};
-
-/* Toshiba specific */
-static const struct hda_verb alc268_toshiba_verbs[] = {
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- { } /* end */
-};
-
-/* Acer specific */
-/* bind volumes of both NID 0x02 and 0x03 */
-static const struct hda_bind_ctls alc268_acer_bind_master_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static void alc268_acer_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
-}
-
-#define alc268_acer_master_sw_get alc262_hp_master_sw_get
-#define alc268_acer_master_sw_put alc262_hp_master_sw_put
-
-static const struct snd_kcontrol_new alc268_acer_aspire_one_mixer[] = {
- /* output mixer control */
- HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .subdevice = HDA_SUBDEV_NID_FLAG | 0x15,
- .info = snd_ctl_boolean_mono_info,
- .get = alc268_acer_master_sw_get,
- .put = alc268_acer_master_sw_put,
- },
- HDA_CODEC_VOLUME("Mic Boost Capture Volume", 0x18, 0, HDA_INPUT),
- { }
-};
-
-static const struct snd_kcontrol_new alc268_acer_mixer[] = {
- /* output mixer control */
- HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .subdevice = HDA_SUBDEV_NID_FLAG | 0x14,
- .info = snd_ctl_boolean_mono_info,
- .get = alc268_acer_master_sw_get,
- .put = alc268_acer_master_sw_put,
- },
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line In Boost Volume", 0x1a, 0, HDA_INPUT),
- { }
-};
-
-static const struct snd_kcontrol_new alc268_acer_dmic_mixer[] = {
- /* output mixer control */
- HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .subdevice = HDA_SUBDEV_NID_FLAG | 0x14,
- .info = snd_ctl_boolean_mono_info,
- .get = alc268_acer_master_sw_get,
- .put = alc268_acer_master_sw_put,
- },
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line In Boost Volume", 0x1a, 0, HDA_INPUT),
- { }
-};
-
-static const struct hda_verb alc268_acer_aspire_one_verbs[] = {
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x23, AC_VERB_SET_CONNECT_SEL, 0x06},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, 0xa017},
- { }
-};
-
-static const struct hda_verb alc268_acer_verbs[] = {
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* internal dmic? */
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- { }
-};
-
-/* unsolicited event for HP jack sensing */
-#define alc268_toshiba_setup alc262_hippo_setup
-
-static void alc268_acer_lc_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x12;
- spec->auto_mic = 1;
-}
-
-static const struct snd_kcontrol_new alc268_dell_mixer[] = {
- /* output mixer control */
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- { }
-};
-
-static const struct hda_verb alc268_dell_verbs[] = {
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_MIC_EVENT | AC_USRSP_EN},
- { }
-};
-
-/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc268_dell_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
-static const struct snd_kcontrol_new alc267_quanta_il1_mixer[] = {
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Capture Volume", 0x23, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Mic Capture Switch", 0x23, 2, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- { }
-};
-
-static const struct hda_verb alc267_quanta_il1_verbs[] = {
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_MIC_EVENT | AC_USRSP_EN},
- { }
-};
-
-static void alc267_quanta_il1_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
-}
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static const struct hda_verb alc268_base_init_verbs[] = {
- /* Unmute DAC0-1 and set vol = 0 */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /*
- * Set up output mixers (0x0c - 0x0e)
- */
- /* set vol=0 to output mixers */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
-
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- /* set PCBEEP vol = 0, mute connections */
- {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- /* Unmute Selector 23h,24h and set the default input to mic-in */
-
- {0x23, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x24, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- { }
-};
-
-/* only for model=test */
-#ifdef CONFIG_SND_DEBUG
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static const struct hda_verb alc268_volume_init_verbs[] = {
- /* set output DAC */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
-
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- { }
-};
-#endif /* CONFIG_SND_DEBUG */
-
-static const struct snd_kcontrol_new alc268_capture_nosrc_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- _DEFINE_CAPSRC(1),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc268_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x24, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x24, 0x0, HDA_OUTPUT),
- _DEFINE_CAPSRC(2),
- { } /* end */
-};
-
-static const struct hda_input_mux alc268_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x3 },
- },
-};
-
-static const struct hda_input_mux alc268_acer_capture_source = {
- .num_items = 3,
- .items = {
- { "Mic", 0x0 },
- { "Internal Mic", 0x1 },
- { "Line", 0x2 },
- },
-};
-
-static const struct hda_input_mux alc268_acer_dmic_capture_source = {
- .num_items = 3,
- .items = {
- { "Mic", 0x0 },
- { "Internal Mic", 0x6 },
- { "Line", 0x2 },
- },
-};
-
-#ifdef CONFIG_SND_DEBUG
-static const struct snd_kcontrol_new alc268_test_mixer[] = {
- /* Volume widgets */
- HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Mono sum Playback Switch", 0x0e, 1, 2, HDA_INPUT),
- HDA_BIND_MUTE("LINE-OUT sum Playback Switch", 0x0f, 2, HDA_INPUT),
- HDA_BIND_MUTE("HP-OUT sum Playback Switch", 0x10, 2, HDA_INPUT),
- HDA_BIND_MUTE("LINE-OUT Playback Switch", 0x14, 2, HDA_OUTPUT),
- HDA_BIND_MUTE("HP-OUT Playback Switch", 0x15, 2, HDA_OUTPUT),
- HDA_BIND_MUTE("Mono Playback Switch", 0x16, 2, HDA_OUTPUT),
- HDA_CODEC_VOLUME("MIC1 Capture Volume", 0x18, 0x0, HDA_INPUT),
- HDA_BIND_MUTE("MIC1 Capture Switch", 0x18, 2, HDA_OUTPUT),
- HDA_CODEC_VOLUME("MIC2 Capture Volume", 0x19, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE1 Capture Volume", 0x1a, 0x0, HDA_INPUT),
- HDA_BIND_MUTE("LINE1 Capture Switch", 0x1a, 2, HDA_OUTPUT),
- /* The below appears problematic on some hardwares */
- /*HDA_CODEC_VOLUME("PCBEEP Playback Volume", 0x1d, 0x0, HDA_INPUT),*/
- HDA_CODEC_VOLUME("PCM-IN1 Capture Volume", 0x23, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("PCM-IN1 Capture Switch", 0x23, 2, HDA_OUTPUT),
- HDA_CODEC_VOLUME("PCM-IN2 Capture Volume", 0x24, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("PCM-IN2 Capture Switch", 0x24, 2, HDA_OUTPUT),
-
- /* Modes for retasking pin widgets */
- ALC_PIN_MODE("LINE-OUT pin mode", 0x14, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("HP-OUT pin mode", 0x15, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("MIC1 pin mode", 0x18, ALC_PIN_DIR_INOUT),
- ALC_PIN_MODE("LINE1 pin mode", 0x1a, ALC_PIN_DIR_INOUT),
-
- /* Controls for GPIO pins, assuming they are configured as outputs */
- ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
- ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
- ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
- ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
-
- /* Switches to allow the digital SPDIF output pin to be enabled.
- * The ALC268 does not have an SPDIF input.
- */
- ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x06, 0x01),
-
- /* A switch allowing EAPD to be enabled. Some laptops seem to use
- * this output to turn on an external amplifier.
- */
- ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
- ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
-
- { } /* end */
-};
-#endif
-
-/*
- * configuration and preset
- */
-static const char * const alc268_models[ALC268_MODEL_LAST] = {
- [ALC267_QUANTA_IL1] = "quanta-il1",
- [ALC268_3ST] = "3stack",
- [ALC268_TOSHIBA] = "toshiba",
- [ALC268_ACER] = "acer",
- [ALC268_ACER_DMIC] = "acer-dmic",
- [ALC268_ACER_ASPIRE_ONE] = "acer-aspire",
- [ALC268_DELL] = "dell",
- [ALC268_ZEPTO] = "zepto",
-#ifdef CONFIG_SND_DEBUG
- [ALC268_TEST] = "test",
-#endif
- [ALC268_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc268_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1025, 0x011e, "Acer Aspire 5720z", ALC268_ACER),
- SND_PCI_QUIRK(0x1025, 0x0126, "Acer", ALC268_ACER),
- SND_PCI_QUIRK(0x1025, 0x012e, "Acer Aspire 5310", ALC268_ACER),
- SND_PCI_QUIRK(0x1025, 0x0130, "Acer Extensa 5210", ALC268_ACER),
- SND_PCI_QUIRK(0x1025, 0x0136, "Acer Aspire 5315", ALC268_ACER),
- SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
- ALC268_ACER_ASPIRE_ONE),
- SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
- SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron 910", ALC268_AUTO),
- SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0,
- "Dell Inspiron Mini9/Vostro A90", ALC268_DELL),
- /* almost compatible with toshiba but with optional digital outs;
- * auto-probing seems working fine
- */
- SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP TX25xx series",
- ALC268_AUTO),
- SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
- SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
- SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
- SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
- {}
-};
-
-/* Toshiba laptops have no unique PCI SSID but only codec SSID */
-static const struct snd_pci_quirk alc268_ssid_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1179, 0xff0a, "TOSHIBA X-200", ALC268_AUTO),
- SND_PCI_QUIRK(0x1179, 0xff0e, "TOSHIBA X-200 HDMI", ALC268_AUTO),
- SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
- ALC268_TOSHIBA),
- {}
-};
-
-static const struct alc_config_preset alc268_presets[] = {
- [ALC267_QUANTA_IL1] = {
- .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
- .cap_mixer = alc268_capture_nosrc_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc267_quanta_il1_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc267_quanta_il1_setup,
- .init_hook = alc_inithook,
- },
- [ALC268_3ST] = {
- .mixers = { alc268_base_mixer, alc268_beep_mixer },
- .cap_mixer = alc268_capture_alt_mixer,
- .init_verbs = { alc268_base_init_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x03,
- .dig_out_nid = ALC268_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .input_mux = &alc268_capture_source,
- },
- [ALC268_TOSHIBA] = {
- .mixers = { alc268_toshiba_mixer, alc268_beep_mixer },
- .cap_mixer = alc268_capture_alt_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc268_toshiba_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .input_mux = &alc268_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc268_toshiba_setup,
- .init_hook = alc_inithook,
- },
- [ALC268_ACER] = {
- .mixers = { alc268_acer_mixer, alc268_beep_mixer },
- .cap_mixer = alc268_capture_alt_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc268_acer_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x02,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .input_mux = &alc268_acer_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc268_acer_setup,
- .init_hook = alc_inithook,
- },
- [ALC268_ACER_DMIC] = {
- .mixers = { alc268_acer_dmic_mixer, alc268_beep_mixer },
- .cap_mixer = alc268_capture_alt_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc268_acer_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x02,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .input_mux = &alc268_acer_dmic_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc268_acer_setup,
- .init_hook = alc_inithook,
- },
- [ALC268_ACER_ASPIRE_ONE] = {
- .mixers = { alc268_acer_aspire_one_mixer, alc268_beep_mixer},
- .cap_mixer = alc268_capture_nosrc_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc268_acer_aspire_one_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc268_acer_lc_setup,
- .init_hook = alc_inithook,
- },
- [ALC268_DELL] = {
- .mixers = { alc268_dell_mixer, alc268_beep_mixer},
- .cap_mixer = alc268_capture_nosrc_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc268_dell_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x02,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc268_dell_setup,
- .init_hook = alc_inithook,
- },
- [ALC268_ZEPTO] = {
- .mixers = { alc268_base_mixer, alc268_beep_mixer },
- .cap_mixer = alc268_capture_alt_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc268_toshiba_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x03,
- .dig_out_nid = ALC268_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .input_mux = &alc268_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc268_toshiba_setup,
- .init_hook = alc_inithook,
- },
-#ifdef CONFIG_SND_DEBUG
- [ALC268_TEST] = {
- .mixers = { alc268_test_mixer },
- .cap_mixer = alc268_capture_mixer,
- .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
- alc268_volume_init_verbs,
- alc268_beep_init_verbs },
- .num_dacs = ARRAY_SIZE(alc268_dac_nids),
- .dac_nids = alc268_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
- .adc_nids = alc268_adc_nids_alt,
- .capsrc_nids = alc268_capsrc_nids,
- .hp_nid = 0x03,
- .dig_out_nid = ALC268_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc268_modes),
- .channel_mode = alc268_modes,
- .input_mux = &alc268_capture_source,
- },
-#endif
-};
-
diff --git a/sound/pci/hda/alc269_quirks.c b/sound/pci/hda/alc269_quirks.c
deleted file mode 100644
index 5ac0e21..0000000
--- a/sound/pci/hda/alc269_quirks.c
+++ /dev/null
@@ -1,674 +0,0 @@
-/*
- * ALC269/ALC270/ALC275/ALC276 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC269 models */
-enum {
- ALC269_AUTO,
- ALC269_BASIC,
- ALC269_QUANTA_FL1,
- ALC269_AMIC,
- ALC269_DMIC,
- ALC269VB_AMIC,
- ALC269VB_DMIC,
- ALC269_FUJITSU,
- ALC269_LIFEBOOK,
- ALC271_ACER,
- ALC269_MODEL_LAST /* last tag */
-};
-
-/*
- * ALC269 channel source setting (2 channel)
- */
-#define ALC269_DIGOUT_NID ALC880_DIGOUT_NID
-
-#define alc269_dac_nids alc260_dac_nids
-
-static const hda_nid_t alc269_adc_nids[1] = {
- /* ADC1 */
- 0x08,
-};
-
-static const hda_nid_t alc269_capsrc_nids[1] = {
- 0x23,
-};
-
-static const hda_nid_t alc269vb_adc_nids[1] = {
- /* ADC1 */
- 0x09,
-};
-
-static const hda_nid_t alc269vb_capsrc_nids[1] = {
- 0x22,
-};
-
-#define alc269_modes alc260_modes
-#define alc269_capture_source alc880_lg_lw_capture_source
-
-static const struct snd_kcontrol_new alc269_base_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc269_quanta_fl1_mixer[] = {
- /* output mixer control */
- HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .subdevice = HDA_SUBDEV_AMP_FLAG,
- .info = snd_hda_mixer_amp_switch_info,
- .get = snd_hda_mixer_amp_switch_get,
- .put = alc268_acer_master_sw_put,
- .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- },
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- { }
-};
-
-static const struct snd_kcontrol_new alc269_lifebook_mixer[] = {
- /* output mixer control */
- HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .subdevice = HDA_SUBDEV_AMP_FLAG,
- .info = snd_hda_mixer_amp_switch_info,
- .get = snd_hda_mixer_amp_switch_get,
- .put = alc268_acer_master_sw_put,
- .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- },
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Dock Mic Playback Volume", 0x0b, 0x03, HDA_INPUT),
- HDA_CODEC_MUTE("Dock Mic Playback Switch", 0x0b, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("Dock Mic Boost Volume", 0x1b, 0, HDA_INPUT),
- { }
-};
-
-static const struct snd_kcontrol_new alc269_laptop_mixer[] = {
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc269vb_laptop_mixer[] = {
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc269_asus_mixer[] = {
- HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Master Playback Switch", 0x0c, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-/* capture mixer elements */
-static const struct snd_kcontrol_new alc269_laptop_analog_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc269_laptop_digital_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc269vb_laptop_analog_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc269vb_laptop_digital_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- { } /* end */
-};
-
-/* FSC amilo */
-#define alc269_fujitsu_mixer alc269_laptop_mixer
-
-static const struct hda_verb alc269_quanta_fl1_verbs[] = {
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- { }
-};
-
-static const struct hda_verb alc269_lifebook_verbs[] = {
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- { }
-};
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc269_quanta_fl1_speaker_automute(struct hda_codec *codec)
-{
- alc_hp_automute(codec);
-
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_COEF_INDEX, 0x0c);
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_PROC_COEF, 0x680);
-
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_COEF_INDEX, 0x0c);
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_PROC_COEF, 0x480);
-}
-
-#define alc269_lifebook_speaker_automute \
- alc269_quanta_fl1_speaker_automute
-
-static void alc269_lifebook_mic_autoswitch(struct hda_codec *codec)
-{
- unsigned int present_laptop;
- unsigned int present_dock;
-
- present_laptop = snd_hda_jack_detect(codec, 0x18);
- present_dock = snd_hda_jack_detect(codec, 0x1b);
-
- /* Laptop mic port overrides dock mic port, design decision */
- if (present_dock)
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL, 0x3);
- if (present_laptop)
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL, 0x0);
- if (!present_dock && !present_laptop)
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL, 0x1);
-}
-
-static void alc269_quanta_fl1_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC_HP_EVENT:
- alc269_quanta_fl1_speaker_automute(codec);
- break;
- case ALC_MIC_EVENT:
- alc_mic_automute(codec);
- break;
- }
-}
-
-static void alc269_lifebook_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- if ((res >> 26) == ALC_HP_EVENT)
- alc269_lifebook_speaker_automute(codec);
- if ((res >> 26) == ALC_MIC_EVENT)
- alc269_lifebook_mic_autoswitch(codec);
-}
-
-static void alc269_quanta_fl1_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-static void alc269_quanta_fl1_init_hook(struct hda_codec *codec)
-{
- alc269_quanta_fl1_speaker_automute(codec);
- alc_mic_automute(codec);
-}
-
-static void alc269_lifebook_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.hp_pins[1] = 0x1a;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
-}
-
-static void alc269_lifebook_init_hook(struct hda_codec *codec)
-{
- alc269_lifebook_speaker_automute(codec);
- alc269_lifebook_mic_autoswitch(codec);
-}
-
-static const struct hda_verb alc269_laptop_dmic_init_verbs[] = {
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x23, AC_VERB_SET_CONNECT_SEL, 0x05},
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7019 | (0x00 << 8))},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc269_laptop_amic_init_verbs[] = {
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x23, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x701b | (0x00 << 8))},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc269vb_laptop_dmic_init_verbs[] = {
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x22, AC_VERB_SET_CONNECT_SEL, 0x06},
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7019 | (0x00 << 8))},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc269vb_laptop_amic_init_verbs[] = {
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x22, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7019 | (0x00 << 8))},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc271_acer_dmic_verbs[] = {
- {0x20, AC_VERB_SET_COEF_INDEX, 0x0d},
- {0x20, AC_VERB_SET_PROC_COEF, 0x4000},
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x22, AC_VERB_SET_CONNECT_SEL, 6},
- { }
-};
-
-static void alc269_laptop_amic_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-static void alc269_laptop_dmic_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x12;
- spec->auto_mic = 1;
-}
-
-static void alc269vb_laptop_amic_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-static void alc269vb_laptop_dmic_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x12;
- spec->auto_mic = 1;
-}
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static const struct hda_verb alc269_init_verbs[] = {
- /*
- * Unmute ADC0 and set the default input to mic-in
- */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /*
- * Set up output mixers (0x02 - 0x03)
- */
- /* set vol=0 to output mixers */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* FIXME: use Mux-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1d, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x23, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* set EAPD */
- {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
- { }
-};
-
-static const struct hda_verb alc269vb_init_verbs[] = {
- /*
- * Unmute ADC0 and set the default input to mic-in
- */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /*
- * Set up output mixers (0x02 - 0x03)
- */
- /* set vol=0 to output mixers */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* FIXME: use Mux-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1d, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x22, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* set EAPD */
- {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
- { }
-};
-
-/*
- * configuration and preset
- */
-static const char * const alc269_models[ALC269_MODEL_LAST] = {
- [ALC269_BASIC] = "basic",
- [ALC269_QUANTA_FL1] = "quanta",
- [ALC269_AMIC] = "laptop-amic",
- [ALC269_DMIC] = "laptop-dmic",
- [ALC269_FUJITSU] = "fujitsu",
- [ALC269_LIFEBOOK] = "lifebook",
- [ALC269_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc269_cfg_tbl[] = {
- SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
- SND_PCI_QUIRK(0x1025, 0x047c, "ACER ZGA", ALC271_ACER),
- SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
- ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1013, "ASUS N61Da", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1113, "ASUS N63Jn", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1143, "ASUS B53f", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1133, "ASUS UJ20ft", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1183, "ASUS K72DR", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x11b3, "ASUS K52DR", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x11e3, "ASUS U33Jc", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80Jt", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82JV", ALC269VB_AMIC),
- SND_PCI_QUIRK(0x1043, 0x12d3, "ASUS N61Jv", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1383, "ASUS UJ30Jc", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x13d3, "ASUS N61JA", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1413, "ASUS UL50", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1443, "ASUS UL30", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1453, "ASUS M60Jv", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1483, "ASUS UL80", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x14f3, "ASUS F83Vf", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x14e3, "ASUS UL20", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1513, "ASUS UX30", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1593, "ASUS N51Vn", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15a3, "ASUS N60Jv", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15b3, "ASUS N60Dp", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15c3, "ASUS N70De", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15e3, "ASUS F83T", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1643, "ASUS M60J", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_AMIC),
- SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_AUTO),
- SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
- SND_PCI_QUIRK(0x152d, 0x1778, "Quanta ON1", ALC269_DMIC),
- SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
- SND_PCI_QUIRK(0x17aa, 0x3be9, "Quanta Wistron", ALC269_AMIC),
- SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_AMIC),
- SND_PCI_QUIRK(0x17ff, 0x059a, "Quanta EL3", ALC269_DMIC),
- SND_PCI_QUIRK(0x17ff, 0x059b, "Quanta JR1", ALC269_DMIC),
- {}
-};
-
-static const struct alc_config_preset alc269_presets[] = {
- [ALC269_BASIC] = {
- .mixers = { alc269_base_mixer },
- .init_verbs = { alc269_init_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .input_mux = &alc269_capture_source,
- },
- [ALC269_QUANTA_FL1] = {
- .mixers = { alc269_quanta_fl1_mixer },
- .init_verbs = { alc269_init_verbs, alc269_quanta_fl1_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .input_mux = &alc269_capture_source,
- .unsol_event = alc269_quanta_fl1_unsol_event,
- .setup = alc269_quanta_fl1_setup,
- .init_hook = alc269_quanta_fl1_init_hook,
- },
- [ALC269_AMIC] = {
- .mixers = { alc269_laptop_mixer },
- .cap_mixer = alc269_laptop_analog_capture_mixer,
- .init_verbs = { alc269_init_verbs,
- alc269_laptop_amic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc269_laptop_amic_setup,
- .init_hook = alc_inithook,
- },
- [ALC269_DMIC] = {
- .mixers = { alc269_laptop_mixer },
- .cap_mixer = alc269_laptop_digital_capture_mixer,
- .init_verbs = { alc269_init_verbs,
- alc269_laptop_dmic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc269_laptop_dmic_setup,
- .init_hook = alc_inithook,
- },
- [ALC269VB_AMIC] = {
- .mixers = { alc269vb_laptop_mixer },
- .cap_mixer = alc269vb_laptop_analog_capture_mixer,
- .init_verbs = { alc269vb_init_verbs,
- alc269vb_laptop_amic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc269vb_laptop_amic_setup,
- .init_hook = alc_inithook,
- },
- [ALC269VB_DMIC] = {
- .mixers = { alc269vb_laptop_mixer },
- .cap_mixer = alc269vb_laptop_digital_capture_mixer,
- .init_verbs = { alc269vb_init_verbs,
- alc269vb_laptop_dmic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc269vb_laptop_dmic_setup,
- .init_hook = alc_inithook,
- },
- [ALC269_FUJITSU] = {
- .mixers = { alc269_fujitsu_mixer },
- .cap_mixer = alc269_laptop_digital_capture_mixer,
- .init_verbs = { alc269_init_verbs,
- alc269_laptop_dmic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc269_laptop_dmic_setup,
- .init_hook = alc_inithook,
- },
- [ALC269_LIFEBOOK] = {
- .mixers = { alc269_lifebook_mixer },
- .init_verbs = { alc269_init_verbs, alc269_lifebook_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .hp_nid = 0x03,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .input_mux = &alc269_capture_source,
- .unsol_event = alc269_lifebook_unsol_event,
- .setup = alc269_lifebook_setup,
- .init_hook = alc269_lifebook_init_hook,
- },
- [ALC271_ACER] = {
- .mixers = { alc269_asus_mixer },
- .cap_mixer = alc269vb_laptop_digital_capture_mixer,
- .init_verbs = { alc269_init_verbs, alc271_acer_dmic_verbs },
- .num_dacs = ARRAY_SIZE(alc269_dac_nids),
- .dac_nids = alc269_dac_nids,
- .adc_nids = alc262_dmic_adc_nids,
- .num_adc_nids = ARRAY_SIZE(alc262_dmic_adc_nids),
- .capsrc_nids = alc262_dmic_capsrc_nids,
- .num_channel_mode = ARRAY_SIZE(alc269_modes),
- .channel_mode = alc269_modes,
- .input_mux = &alc269_capture_source,
- .dig_out_nid = ALC880_DIGOUT_NID,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc269vb_laptop_dmic_setup,
- .init_hook = alc_inithook,
- },
-};
-
diff --git a/sound/pci/hda/alc662_quirks.c b/sound/pci/hda/alc662_quirks.c
deleted file mode 100644
index e69a6ea..0000000
--- a/sound/pci/hda/alc662_quirks.c
+++ /dev/null
@@ -1,1408 +0,0 @@
-/*
- * ALC662/ALC663/ALC665/ALC670 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC662 models */
-enum {
- ALC662_AUTO,
- ALC662_3ST_2ch_DIG,
- ALC662_3ST_6ch_DIG,
- ALC662_3ST_6ch,
- ALC662_5ST_DIG,
- ALC662_LENOVO_101E,
- ALC662_ASUS_EEEPC_P701,
- ALC662_ASUS_EEEPC_EP20,
- ALC663_ASUS_M51VA,
- ALC663_ASUS_G71V,
- ALC663_ASUS_H13,
- ALC663_ASUS_G50V,
- ALC662_ECS,
- ALC663_ASUS_MODE1,
- ALC662_ASUS_MODE2,
- ALC663_ASUS_MODE3,
- ALC663_ASUS_MODE4,
- ALC663_ASUS_MODE5,
- ALC663_ASUS_MODE6,
- ALC663_ASUS_MODE7,
- ALC663_ASUS_MODE8,
- ALC272_DELL,
- ALC272_DELL_ZM1,
- ALC272_SAMSUNG_NC10,
- ALC662_MODEL_LAST,
-};
-
-#define ALC662_DIGOUT_NID 0x06
-#define ALC662_DIGIN_NID 0x0a
-
-static const hda_nid_t alc662_dac_nids[3] = {
- /* front, rear, clfe */
- 0x02, 0x03, 0x04
-};
-
-static const hda_nid_t alc272_dac_nids[2] = {
- 0x02, 0x03
-};
-
-static const hda_nid_t alc662_adc_nids[2] = {
- /* ADC1-2 */
- 0x09, 0x08
-};
-
-static const hda_nid_t alc272_adc_nids[1] = {
- /* ADC1-2 */
- 0x08,
-};
-
-static const hda_nid_t alc662_capsrc_nids[2] = { 0x22, 0x23 };
-static const hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
-
-
-/* input MUX */
-/* FIXME: should be a matrix-type input source selection */
-static const struct hda_input_mux alc662_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static const struct hda_input_mux alc662_lenovo_101e_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x1 },
- { "Line", 0x2 },
- },
-};
-
-static const struct hda_input_mux alc663_capture_source = {
- .num_items = 3,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- },
-};
-
-#if 0 /* set to 1 for testing other input sources below */
-static const struct hda_input_mux alc272_nc10_capture_source = {
- .num_items = 16,
- .items = {
- { "Autoselect Mic", 0x0 },
- { "Internal Mic", 0x1 },
- { "In-0x02", 0x2 },
- { "In-0x03", 0x3 },
- { "In-0x04", 0x4 },
- { "In-0x05", 0x5 },
- { "In-0x06", 0x6 },
- { "In-0x07", 0x7 },
- { "In-0x08", 0x8 },
- { "In-0x09", 0x9 },
- { "In-0x0a", 0x0a },
- { "In-0x0b", 0x0b },
- { "In-0x0c", 0x0c },
- { "In-0x0d", 0x0d },
- { "In-0x0e", 0x0e },
- { "In-0x0f", 0x0f },
- },
-};
-#endif
-
-/*
- * 2ch mode
- */
-static const struct hda_channel_mode alc662_3ST_2ch_modes[1] = {
- { 2, NULL }
-};
-
-/*
- * 2ch mode
- */
-static const struct hda_verb alc662_3ST_ch2_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { } /* end */
-};
-
-/*
- * 6ch mode
- */
-static const struct hda_verb alc662_3ST_ch6_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-static const struct hda_channel_mode alc662_3ST_6ch_modes[2] = {
- { 2, alc662_3ST_ch2_init },
- { 6, alc662_3ST_ch6_init },
-};
-
-/*
- * 2ch mode
- */
-static const struct hda_verb alc662_sixstack_ch6_init[] = {
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
-
-/*
- * 6ch mode
- */
-static const struct hda_verb alc662_sixstack_ch8_init[] = {
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
-
-static const struct hda_channel_mode alc662_5stack_modes[2] = {
- { 2, alc662_sixstack_ch6_init },
- { 6, alc662_sixstack_ch8_init },
-};
-
-/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
- * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
- */
-
-static const struct snd_kcontrol_new alc662_base_mixer[] = {
- /* output mixer control */
- HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x0c, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x3, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Surround Playback Switch", 0x0d, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-
- /*Input mixer control */
- HDA_CODEC_VOLUME("CD Playback Volume", 0xb, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0xb, 0x4, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0xb, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0xb, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0xb, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0xb, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0xb, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0xb, 0x01, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc662_3ST_2ch_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x0c, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc662_3ST_6ch_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x0c, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Surround Playback Switch", 0x0d, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc662_lenovo_101e_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x02, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Speaker Playback Switch", 0x03, 2, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
- HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- ALC262_HIPPO_MASTER_SWITCH,
-
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = {
- ALC262_HIPPO_MASTER_SWITCH,
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("MuteCtrl Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct hda_bind_ctls alc663_asus_bind_master_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct hda_bind_ctls alc663_asus_one_bind_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct snd_kcontrol_new alc663_m51va_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume", &alc663_asus_bind_master_vol),
- HDA_BIND_SW("Master Playback Switch", &alc663_asus_one_bind_switch),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct hda_bind_ctls alc663_asus_tree_bind_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct snd_kcontrol_new alc663_two_hp_m1_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume", &alc663_asus_bind_master_vol),
- HDA_BIND_SW("Master Playback Switch", &alc663_asus_tree_bind_switch),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("F-Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("F-Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-
- { } /* end */
-};
-
-static const struct hda_bind_ctls alc663_asus_four_bind_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct snd_kcontrol_new alc663_two_hp_m2_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume", &alc663_asus_bind_master_vol),
- HDA_BIND_SW("Master Playback Switch", &alc663_asus_four_bind_switch),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("F-Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("F-Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc662_1bjd_mixer[] = {
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("F-Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("F-Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct hda_bind_ctls alc663_asus_two_bind_master_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x04, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct hda_bind_ctls alc663_asus_two_bind_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x16, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct snd_kcontrol_new alc663_asus_21jd_clfe_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume",
- &alc663_asus_two_bind_master_vol),
- HDA_BIND_SW("Master Playback Switch", &alc663_asus_two_bind_switch),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc663_asus_15jd_clfe_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume", &alc663_asus_bind_master_vol),
- HDA_BIND_SW("Master Playback Switch", &alc663_asus_two_bind_switch),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc663_g71v_mixer[] = {
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Front Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc663_g50v_mixer[] = {
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- { } /* end */
-};
-
-static const struct hda_bind_ctls alc663_asus_mode7_8_all_bind_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct hda_bind_ctls alc663_asus_mode7_8_sp_bind_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-static const struct snd_kcontrol_new alc663_mode7_mixer[] = {
- HDA_BIND_SW("Master Playback Switch", &alc663_asus_mode7_8_all_bind_switch),
- HDA_BIND_VOL("Speaker Playback Volume", &alc663_asus_bind_master_vol),
- HDA_BIND_SW("Speaker Playback Switch", &alc663_asus_mode7_8_sp_bind_switch),
- HDA_CODEC_MUTE("Headphone1 Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone2 Playback Switch", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("IntMic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("IntMic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc663_mode8_mixer[] = {
- HDA_BIND_SW("Master Playback Switch", &alc663_asus_mode7_8_all_bind_switch),
- HDA_BIND_VOL("Speaker Playback Volume", &alc663_asus_bind_master_vol),
- HDA_BIND_SW("Speaker Playback Switch", &alc663_asus_mode7_8_sp_bind_switch),
- HDA_CODEC_MUTE("Headphone1 Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone2 Playback Switch", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-
-static const struct snd_kcontrol_new alc662_chmode_mixer[] = {
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc_ch_mode_info,
- .get = alc_ch_mode_get,
- .put = alc_ch_mode_put,
- },
- { } /* end */
-};
-
-static const struct hda_verb alc662_init_verbs[] = {
- /* ADC: mute amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* Front Pin: output 0 (0x0c) */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Rear Pin: output 1 (0x0d) */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* CLFE Pin: output 2 (0x0e) */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Front Mic pin: input vref at 80% */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line-2 In: Headphone output (output 0 - 0x0c) */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- { }
-};
-
-static const struct hda_verb alc662_eapd_init_verbs[] = {
- /* always trun on EAPD */
- {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
- {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
- { }
-};
-
-static const struct hda_verb alc662_sue_init_verbs[] = {
- {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC_FRONT_EVENT},
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc662_eeepc_sue_init_verbs[] = {
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-/* Set Unsolicited Event*/
-static const struct hda_verb alc662_eeepc_ep20_sue_init_verbs[] = {
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_m51va_init_verbs[] = {
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_21jd_amic_init_verbs[] = {
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc662_1bjd_amic_init_verbs[] = {
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_15jd_amic_init_verbs[] = {
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_two_hp_amic_m1_init_verbs[] = {
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x0}, /* Headphone */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x0}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_two_hp_amic_m2_init_verbs[] = {
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_g71v_init_verbs[] = {
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, */
- /* {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, */ /* Headphone */
-
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphone */
-
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC_FRONT_EVENT},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_g50v_init_verbs[] = {
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphone */
-
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc662_ecs_init_verbs[] = {
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0x701f},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc272_dell_zm1_init_verbs[] = {
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc272_dell_init_verbs[] = {
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_mode7_init_verbs[] = {
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
- {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct hda_verb alc663_mode8_init_verbs[] = {
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {}
-};
-
-static const struct snd_kcontrol_new alc662_auto_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc272_auto_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-static void alc662_lenovo_101e_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x1b;
- spec->autocfg.line_out_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->detect_line = 1;
- spec->automute_lines = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
-}
-
-static void alc662_eeepc_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- alc262_hippo1_setup(codec);
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-static void alc662_eeepc_ep20_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x1b;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
-}
-
-static void alc663_m51va_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x12;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode1 ******************************/
-static void alc663_mode1_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode2 ******************************/
-static void alc662_mode2_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x1b;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode3 ******************************/
-static void alc663_mode3_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode4 ******************************/
-static void alc663_mode4_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->autocfg.speaker_pins[1] = 0x16;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute_mixer_nid[1] = 0x0e;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode5 ******************************/
-static void alc663_mode5_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->autocfg.speaker_pins[1] = 0x16;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute_mixer_nid[1] = 0x0e;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode6 ******************************/
-static void alc663_mode6_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x1b;
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0c;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode7 ******************************/
-static void alc663_mode7_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x1b;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x19;
- spec->auto_mic = 1;
-}
-
-/* ***************** Mode8 ******************************/
-static void alc663_mode8_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.hp_pins[1] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x12;
- spec->auto_mic = 1;
-}
-
-static void alc663_g71v_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x21;
- spec->autocfg.line_out_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
- spec->detect_line = 1;
- spec->automute_lines = 1;
- spec->ext_mic_pin = 0x18;
- spec->int_mic_pin = 0x12;
- spec->auto_mic = 1;
-}
-
-#define alc663_g50v_setup alc663_m51va_setup
-
-static const struct snd_kcontrol_new alc662_ecs_mixer[] = {
- HDA_CODEC_VOLUME("Master Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- ALC262_HIPPO_MASTER_SWITCH,
-
- HDA_CODEC_VOLUME("Mic/LineIn Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic/LineIn Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic/LineIn Playback Switch", 0x0b, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc272_nc10_mixer[] = {
- /* Master Playback automatically created from Speaker and Headphone */
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- { } /* end */
-};
-
-
-/*
- * configuration and preset
- */
-static const char * const alc662_models[ALC662_MODEL_LAST] = {
- [ALC662_3ST_2ch_DIG] = "3stack-dig",
- [ALC662_3ST_6ch_DIG] = "3stack-6ch-dig",
- [ALC662_3ST_6ch] = "3stack-6ch",
- [ALC662_5ST_DIG] = "5stack-dig",
- [ALC662_LENOVO_101E] = "lenovo-101e",
- [ALC662_ASUS_EEEPC_P701] = "eeepc-p701",
- [ALC662_ASUS_EEEPC_EP20] = "eeepc-ep20",
- [ALC662_ECS] = "ecs",
- [ALC663_ASUS_M51VA] = "m51va",
- [ALC663_ASUS_G71V] = "g71v",
- [ALC663_ASUS_H13] = "h13",
- [ALC663_ASUS_G50V] = "g50v",
- [ALC663_ASUS_MODE1] = "asus-mode1",
- [ALC662_ASUS_MODE2] = "asus-mode2",
- [ALC663_ASUS_MODE3] = "asus-mode3",
- [ALC663_ASUS_MODE4] = "asus-mode4",
- [ALC663_ASUS_MODE5] = "asus-mode5",
- [ALC663_ASUS_MODE6] = "asus-mode6",
- [ALC663_ASUS_MODE7] = "asus-mode7",
- [ALC663_ASUS_MODE8] = "asus-mode8",
- [ALC272_DELL] = "dell",
- [ALC272_DELL_ZM1] = "dell-zm1",
- [ALC272_SAMSUNG_NC10] = "samsung-nc10",
- [ALC662_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc662_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
- SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL),
- SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1),
- SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
- SND_PCI_QUIRK(0x1043, 0x1173, "ASUS K73Jn", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
- SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1203, "ASUS NB", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1303, "ASUS G60J", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1333, "ASUS G60Jx", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1339, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x13e3, "ASUS N71JA", ALC663_ASUS_MODE7),
- SND_PCI_QUIRK(0x1043, 0x1463, "ASUS N71", ALC663_ASUS_MODE7),
- SND_PCI_QUIRK(0x1043, 0x14d3, "ASUS G72", ALC663_ASUS_MODE8),
- SND_PCI_QUIRK(0x1043, 0x1563, "ASUS N90", ALC663_ASUS_MODE3),
- SND_PCI_QUIRK(0x1043, 0x15d3, "ASUS N50SF F50SF", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x16f3, "ASUS K40C K50C", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1733, "ASUS N81De", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
- SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
- SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1793, "ASUS F50GX", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3),
- SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA),
- SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
- SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
- SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA),
- /*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/
- SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
- SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
- SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x18c3, "ASUS VX5", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
- SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V),
- /*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/
- SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
- SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA),
- SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
- SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
- SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x1043, 0x82a1, "ASUS Eeepc", ALC662_ASUS_EEEPC_P701),
- SND_PCI_QUIRK(0x1043, 0x82d1, "ASUS Eeepc EP20", ALC662_ASUS_EEEPC_EP20),
- SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
- SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
- ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
- SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
- SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
- ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x152d, 0x2304, "Quanta WH1", ALC663_ASUS_H13),
- SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
- SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
- SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0",
- ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK_MASK(0x1854, 0xf000, 0x2000, "ASUS H13-200x",
- ALC663_ASUS_H13),
- SND_PCI_QUIRK(0x1991, 0x5628, "Ordissimo EVE", ALC662_LENOVO_101E),
- {}
-};
-
-static const struct alc_config_preset alc662_presets[] = {
- [ALC662_3ST_2ch_DIG] = {
- .mixers = { alc662_3ST_2ch_mixer },
- .init_verbs = { alc662_init_verbs, alc662_eapd_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .dig_in_nid = ALC662_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_capture_source,
- },
- [ALC662_3ST_6ch_DIG] = {
- .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer },
- .init_verbs = { alc662_init_verbs, alc662_eapd_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .dig_in_nid = ALC662_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
- .channel_mode = alc662_3ST_6ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc662_capture_source,
- },
- [ALC662_3ST_6ch] = {
- .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer },
- .init_verbs = { alc662_init_verbs, alc662_eapd_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
- .channel_mode = alc662_3ST_6ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc662_capture_source,
- },
- [ALC662_5ST_DIG] = {
- .mixers = { alc662_base_mixer, alc662_chmode_mixer },
- .init_verbs = { alc662_init_verbs, alc662_eapd_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .dig_in_nid = ALC662_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_5stack_modes),
- .channel_mode = alc662_5stack_modes,
- .input_mux = &alc662_capture_source,
- },
- [ALC662_LENOVO_101E] = {
- .mixers = { alc662_lenovo_101e_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc662_sue_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_lenovo_101e_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc662_lenovo_101e_setup,
- .init_hook = alc_inithook,
- },
- [ALC662_ASUS_EEEPC_P701] = {
- .mixers = { alc662_eeepc_p701_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc662_eeepc_sue_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc662_eeepc_setup,
- .init_hook = alc_inithook,
- },
- [ALC662_ASUS_EEEPC_EP20] = {
- .mixers = { alc662_eeepc_ep20_mixer,
- alc662_chmode_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc662_eeepc_ep20_sue_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
- .channel_mode = alc662_3ST_6ch_modes,
- .input_mux = &alc662_lenovo_101e_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc662_eeepc_ep20_setup,
- .init_hook = alc_inithook,
- },
- [ALC662_ECS] = {
- .mixers = { alc662_ecs_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc662_ecs_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc662_eeepc_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_M51VA] = {
- .mixers = { alc663_m51va_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_m51va_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_m51va_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_G71V] = {
- .mixers = { alc663_g71v_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_g71v_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_g71v_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_H13] = {
- .mixers = { alc663_m51va_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_m51va_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .setup = alc663_m51va_setup,
- .unsol_event = alc_sku_unsol_event,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_G50V] = {
- .mixers = { alc663_g50v_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_g50v_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
- .channel_mode = alc662_3ST_6ch_modes,
- .input_mux = &alc663_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_g50v_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_MODE1] = {
- .mixers = { alc663_m51va_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_21jd_amic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .hp_nid = 0x03,
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode1_setup,
- .init_hook = alc_inithook,
- },
- [ALC662_ASUS_MODE2] = {
- .mixers = { alc662_1bjd_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc662_1bjd_amic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc662_mode2_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_MODE3] = {
- .mixers = { alc663_two_hp_m1_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_two_hp_amic_m1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .hp_nid = 0x03,
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode3_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_MODE4] = {
- .mixers = { alc663_asus_21jd_clfe_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_21jd_amic_init_verbs},
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .hp_nid = 0x03,
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode4_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_MODE5] = {
- .mixers = { alc663_asus_15jd_clfe_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_15jd_amic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .hp_nid = 0x03,
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode5_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_MODE6] = {
- .mixers = { alc663_two_hp_m2_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_two_hp_amic_m2_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .hp_nid = 0x03,
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode6_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_MODE7] = {
- .mixers = { alc663_mode7_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_mode7_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .hp_nid = 0x03,
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode7_setup,
- .init_hook = alc_inithook,
- },
- [ALC663_ASUS_MODE8] = {
- .mixers = { alc663_mode8_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_mode8_init_verbs },
- .num_dacs = ARRAY_SIZE(alc662_dac_nids),
- .hp_nid = 0x03,
- .dac_nids = alc662_dac_nids,
- .dig_out_nid = ALC662_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode8_setup,
- .init_hook = alc_inithook,
- },
- [ALC272_DELL] = {
- .mixers = { alc663_m51va_mixer },
- .cap_mixer = alc272_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc272_dell_init_verbs },
- .num_dacs = ARRAY_SIZE(alc272_dac_nids),
- .dac_nids = alc272_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .adc_nids = alc272_adc_nids,
- .num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
- .capsrc_nids = alc272_capsrc_nids,
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_m51va_setup,
- .init_hook = alc_inithook,
- },
- [ALC272_DELL_ZM1] = {
- .mixers = { alc663_m51va_mixer },
- .cap_mixer = alc662_auto_capture_mixer,
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc272_dell_zm1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc272_dac_nids),
- .dac_nids = alc272_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .adc_nids = alc662_adc_nids,
- .num_adc_nids = 1,
- .capsrc_nids = alc662_capsrc_nids,
- .channel_mode = alc662_3ST_2ch_modes,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_m51va_setup,
- .init_hook = alc_inithook,
- },
- [ALC272_SAMSUNG_NC10] = {
- .mixers = { alc272_nc10_mixer },
- .init_verbs = { alc662_init_verbs,
- alc662_eapd_init_verbs,
- alc663_21jd_amic_init_verbs },
- .num_dacs = ARRAY_SIZE(alc272_dac_nids),
- .dac_nids = alc272_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
- .channel_mode = alc662_3ST_2ch_modes,
- /*.input_mux = &alc272_nc10_capture_source,*/
- .unsol_event = alc_sku_unsol_event,
- .setup = alc663_mode4_setup,
- .init_hook = alc_inithook,
- },
-};
-
-
diff --git a/sound/pci/hda/alc680_quirks.c b/sound/pci/hda/alc680_quirks.c
deleted file mode 100644
index 0eeb227..0000000
--- a/sound/pci/hda/alc680_quirks.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * ALC680 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC680 models */
-enum {
- ALC680_AUTO,
- ALC680_BASE,
- ALC680_MODEL_LAST,
-};
-
-#define ALC680_DIGIN_NID ALC880_DIGIN_NID
-#define ALC680_DIGOUT_NID ALC880_DIGOUT_NID
-#define alc680_modes alc260_modes
-
-static const hda_nid_t alc680_dac_nids[3] = {
- /* Lout1, Lout2, hp */
- 0x02, 0x03, 0x04
-};
-
-static const hda_nid_t alc680_adc_nids[3] = {
- /* ADC0-2 */
- /* DMIC, MIC, Line-in*/
- 0x07, 0x08, 0x09
-};
-
-/*
- * Analog capture ADC cgange
- */
-static hda_nid_t alc680_get_cur_adc(struct hda_codec *codec)
-{
- static hda_nid_t pins[] = {0x18, 0x19};
- static hda_nid_t adcs[] = {0x08, 0x09};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pins); i++) {
- if (!is_jack_detectable(codec, pins[i]))
- continue;
- if (snd_hda_jack_detect(codec, pins[i]))
- return adcs[i];
- }
- return 0x07;
-}
-
-static void alc680_rec_autoswitch(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- hda_nid_t nid = alc680_get_cur_adc(codec);
- if (spec->cur_adc && nid != spec->cur_adc) {
- __snd_hda_codec_cleanup_stream(codec, spec->cur_adc, 1);
- spec->cur_adc = nid;
- snd_hda_codec_setup_stream(codec, nid,
- spec->cur_adc_stream_tag, 0,
- spec->cur_adc_format);
- }
-}
-
-static int alc680_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
- struct hda_codec *codec,
- unsigned int stream_tag,
- unsigned int format,
- struct snd_pcm_substream *substream)
-{
- struct alc_spec *spec = codec->spec;
- hda_nid_t nid = alc680_get_cur_adc(codec);
-
- spec->cur_adc = nid;
- spec->cur_adc_stream_tag = stream_tag;
- spec->cur_adc_format = format;
- snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
- return 0;
-}
-
-static int alc680_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
- struct hda_codec *codec,
- struct snd_pcm_substream *substream)
-{
- struct alc_spec *spec = codec->spec;
- snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
- spec->cur_adc = 0;
- return 0;
-}
-
-static const struct hda_pcm_stream alc680_pcm_analog_auto_capture = {
- .substreams = 1, /* can be overridden */
- .channels_min = 2,
- .channels_max = 2,
- /* NID is set in alc_build_pcms */
- .ops = {
- .prepare = alc680_capture_pcm_prepare,
- .cleanup = alc680_capture_pcm_cleanup
- },
-};
-
-static const struct snd_kcontrol_new alc680_base_mixer[] = {
- /* output mixer control */
- HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x4, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x16, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x12, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line In Boost Volume", 0x19, 0, HDA_INPUT),
- { }
-};
-
-static const struct hda_bind_ctls alc680_bind_cap_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x07, 3, 0, HDA_INPUT),
- HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_INPUT),
- HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_INPUT),
- 0
- },
-};
-
-static const struct hda_bind_ctls alc680_bind_cap_switch = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x07, 3, 0, HDA_INPUT),
- HDA_COMPOSE_AMP_VAL(0x08, 3, 0, HDA_INPUT),
- HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_INPUT),
- 0
- },
-};
-
-static const struct snd_kcontrol_new alc680_master_capture_mixer[] = {
- HDA_BIND_VOL("Capture Volume", &alc680_bind_cap_vol),
- HDA_BIND_SW("Capture Switch", &alc680_bind_cap_switch),
- { } /* end */
-};
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static const struct hda_verb alc680_init_verbs[] = {
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- {0x16, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_MIC_EVENT | AC_USRSP_EN},
- {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_MIC_EVENT | AC_USRSP_EN},
-
- { }
-};
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc680_base_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x16;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->autocfg.speaker_pins[1] = 0x15;
- spec->autocfg.num_inputs = 2;
- spec->autocfg.inputs[0].pin = 0x18;
- spec->autocfg.inputs[0].type = AUTO_PIN_MIC;
- spec->autocfg.inputs[1].pin = 0x19;
- spec->autocfg.inputs[1].type = AUTO_PIN_LINE_IN;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
-}
-
-static void alc680_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- if ((res >> 26) == ALC_HP_EVENT)
- alc_hp_automute(codec);
- if ((res >> 26) == ALC_MIC_EVENT)
- alc680_rec_autoswitch(codec);
-}
-
-static void alc680_inithook(struct hda_codec *codec)
-{
- alc_hp_automute(codec);
- alc680_rec_autoswitch(codec);
-}
-
-/*
- * configuration and preset
- */
-static const char * const alc680_models[ALC680_MODEL_LAST] = {
- [ALC680_BASE] = "base",
- [ALC680_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc680_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1043, 0x12f3, "ASUS NX90", ALC680_BASE),
- {}
-};
-
-static const struct alc_config_preset alc680_presets[] = {
- [ALC680_BASE] = {
- .mixers = { alc680_base_mixer },
- .cap_mixer = alc680_master_capture_mixer,
- .init_verbs = { alc680_init_verbs },
- .num_dacs = ARRAY_SIZE(alc680_dac_nids),
- .dac_nids = alc680_dac_nids,
- .dig_out_nid = ALC680_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc680_modes),
- .channel_mode = alc680_modes,
- .unsol_event = alc680_unsol_event,
- .setup = alc680_base_setup,
- .init_hook = alc680_inithook,
-
- },
-};
diff --git a/sound/pci/hda/alc861_quirks.c b/sound/pci/hda/alc861_quirks.c
deleted file mode 100644
index d719ec6..0000000
--- a/sound/pci/hda/alc861_quirks.c
+++ /dev/null
@@ -1,725 +0,0 @@
-/*
- * ALC660/ALC861 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC861 models */
-enum {
- ALC861_AUTO,
- ALC861_3ST,
- ALC660_3ST,
- ALC861_3ST_DIG,
- ALC861_6ST_DIG,
- ALC861_UNIWILL_M31,
- ALC861_TOSHIBA,
- ALC861_ASUS,
- ALC861_ASUS_LAPTOP,
- ALC861_MODEL_LAST,
-};
-
-/*
- * ALC861 channel source setting (2/6 channel selection for 3-stack)
- */
-
-/*
- * set the path ways for 2 channel output
- * need to set the codec line out and mic 1 pin widgets to inputs
- */
-static const struct hda_verb alc861_threestack_ch2_init[] = {
- /* set pin widget 1Ah (line in) for input */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* set pin widget 18h (mic1/2) for input, for mic also enable
- * the vref
- */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
-
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
-#if 0
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
-#endif
- { } /* end */
-};
-/*
- * 6ch mode
- * need to set the codec line out and mic 1 pin widgets to outputs
- */
-static const struct hda_verb alc861_threestack_ch6_init[] = {
- /* set pin widget 1Ah (line in) for output (Back Surround)*/
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* set pin widget 18h (mic1) for output (CLFE)*/
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
-
- { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
- { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
-
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
-#if 0
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
-#endif
- { } /* end */
-};
-
-static const struct hda_channel_mode alc861_threestack_modes[2] = {
- { 2, alc861_threestack_ch2_init },
- { 6, alc861_threestack_ch6_init },
-};
-/* Set mic1 as input and unmute the mixer */
-static const struct hda_verb alc861_uniwill_m31_ch2_init[] = {
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
- { } /* end */
-};
-/* Set mic1 as output and mute mixer */
-static const struct hda_verb alc861_uniwill_m31_ch4_init[] = {
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
- { } /* end */
-};
-
-static const struct hda_channel_mode alc861_uniwill_m31_modes[2] = {
- { 2, alc861_uniwill_m31_ch2_init },
- { 4, alc861_uniwill_m31_ch4_init },
-};
-
-/* Set mic1 and line-in as input and unmute the mixer */
-static const struct hda_verb alc861_asus_ch2_init[] = {
- /* set pin widget 1Ah (line in) for input */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* set pin widget 18h (mic1/2) for input, for mic also enable
- * the vref
- */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
-
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
-#if 0
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
-#endif
- { } /* end */
-};
-/* Set mic1 nad line-in as output and mute mixer */
-static const struct hda_verb alc861_asus_ch6_init[] = {
- /* set pin widget 1Ah (line in) for output (Back Surround)*/
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* { 0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
- /* set pin widget 18h (mic1) for output (CLFE)*/
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
- { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
- { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
-
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
-#if 0
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
-#endif
- { } /* end */
-};
-
-static const struct hda_channel_mode alc861_asus_modes[2] = {
- { 2, alc861_asus_ch2_init },
- { 6, alc861_asus_ch6_init },
-};
-
-/* patch-ALC861 */
-
-static const struct snd_kcontrol_new alc861_base_mixer[] = {
- /* output mixer control */
- HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
-
- /*Input mixer control */
- /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
- HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
-
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc861_3ST_mixer[] = {
- /* output mixer control */
- HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
- /*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
-
- /* Input mixer control */
- /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
- HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
-
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc_ch_mode_info,
- .get = alc_ch_mode_get,
- .put = alc_ch_mode_put,
- .private_value = ARRAY_SIZE(alc861_threestack_modes),
- },
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc861_toshiba_mixer[] = {
- /* output mixer control */
- HDA_CODEC_MUTE("Master Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
-
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc861_uniwill_m31_mixer[] = {
- /* output mixer control */
- HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
- /*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
-
- /* Input mixer control */
- /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
- HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
-
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc_ch_mode_info,
- .get = alc_ch_mode_get,
- .put = alc_ch_mode_put,
- .private_value = ARRAY_SIZE(alc861_uniwill_m31_modes),
- },
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc861_asus_mixer[] = {
- /* output mixer control */
- HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
-
- /* Input mixer control */
- HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT),
-
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc_ch_mode_info,
- .get = alc_ch_mode_get,
- .put = alc_ch_mode_put,
- .private_value = ARRAY_SIZE(alc861_asus_modes),
- },
- { }
-};
-
-/* additional mixer */
-static const struct snd_kcontrol_new alc861_asus_laptop_mixer[] = {
- HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
- { }
-};
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static const struct hda_verb alc861_base_init_verbs[] = {
- /*
- * Unmute ADC0 and set the default input to mic-in
- */
- /* port-A for surround (rear panel) */
- { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-B for mic-in (rear panel) with vref */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-C for line-in (rear panel) */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* port-D for Front */
- { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-E for HP out (front panel) */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
- /* route front PCM to HP */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-F for mic-in (front panel) with vref */
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-G for CLFE (rear panel) */
- { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-H for side (rear panel) */
- { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* CD-in */
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* route front mic to ADC1*/
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Unmute DAC0~3 & spdif out*/
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Unmute Mixer 14 (mic) 1c (Line in)*/
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* Unmute Stereo Mixer 15 */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
-
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- /* hp used DAC 3 (Front) */
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
-
- { }
-};
-
-static const struct hda_verb alc861_threestack_init_verbs[] = {
- /*
- * Unmute ADC0 and set the default input to mic-in
- */
- /* port-A for surround (rear panel) */
- { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- /* port-B for mic-in (rear panel) with vref */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-C for line-in (rear panel) */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* port-D for Front */
- { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-E for HP out (front panel) */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
- /* route front PCM to HP */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-F for mic-in (front panel) with vref */
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-G for CLFE (rear panel) */
- { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- /* port-H for side (rear panel) */
- { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- /* CD-in */
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* route front mic to ADC1*/
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* Unmute DAC0~3 & spdif out*/
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Unmute Mixer 14 (mic) 1c (Line in)*/
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* Unmute Stereo Mixer 15 */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
-
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- /* hp used DAC 3 (Front) */
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- { }
-};
-
-static const struct hda_verb alc861_uniwill_m31_init_verbs[] = {
- /*
- * Unmute ADC0 and set the default input to mic-in
- */
- /* port-A for surround (rear panel) */
- { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- /* port-B for mic-in (rear panel) with vref */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-C for line-in (rear panel) */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* port-D for Front */
- { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-E for HP out (front panel) */
- /* this has to be set to VREF80 */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* route front PCM to HP */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-F for mic-in (front panel) with vref */
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-G for CLFE (rear panel) */
- { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- /* port-H for side (rear panel) */
- { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- /* CD-in */
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* route front mic to ADC1*/
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* Unmute DAC0~3 & spdif out*/
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- /* Unmute Mixer 14 (mic) 1c (Line in)*/
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* Unmute Stereo Mixer 15 */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
-
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- /* hp used DAC 3 (Front) */
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- { }
-};
-
-static const struct hda_verb alc861_asus_init_verbs[] = {
- /*
- * Unmute ADC0 and set the default input to mic-in
- */
- /* port-A for surround (rear panel)
- * according to codec#0 this is the HP jack
- */
- { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* was 0x00 */
- /* route front PCM to HP */
- { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x01 },
- /* port-B for mic-in (rear panel) with vref */
- { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-C for line-in (rear panel) */
- { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* port-D for Front */
- { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-E for HP out (front panel) */
- /* this has to be set to VREF80 */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* route front PCM to HP */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
- /* port-F for mic-in (front panel) with vref */
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- /* port-G for CLFE (rear panel) */
- { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* port-H for side (rear panel) */
- { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- /* CD-in */
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* route front mic to ADC1*/
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* Unmute DAC0~3 & spdif out*/
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute Mixer 14 (mic) 1c (Line in)*/
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* Unmute Stereo Mixer 15 */
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
-
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- /* hp used DAC 3 (Front) */
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- { }
-};
-
-/* additional init verbs for ASUS laptops */
-static const struct hda_verb alc861_asus_laptop_init_verbs[] = {
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x45 }, /* HP-out */
- { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2) }, /* mute line-in */
- { }
-};
-
-static const struct hda_verb alc861_toshiba_init_verbs[] = {
- {0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-
- { }
-};
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc861_toshiba_automute(struct hda_codec *codec)
-{
- unsigned int present = snd_hda_jack_detect(codec, 0x0f);
-
- snd_hda_codec_amp_stereo(codec, 0x16, HDA_INPUT, 0,
- HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
- snd_hda_codec_amp_stereo(codec, 0x1a, HDA_INPUT, 3,
- HDA_AMP_MUTE, present ? 0 : HDA_AMP_MUTE);
-}
-
-static void alc861_toshiba_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- if ((res >> 26) == ALC_HP_EVENT)
- alc861_toshiba_automute(codec);
-}
-
-#define ALC861_DIGOUT_NID 0x07
-
-static const struct hda_channel_mode alc861_8ch_modes[1] = {
- { 8, NULL }
-};
-
-static const hda_nid_t alc861_dac_nids[4] = {
- /* front, surround, clfe, side */
- 0x03, 0x06, 0x05, 0x04
-};
-
-static const hda_nid_t alc660_dac_nids[3] = {
- /* front, clfe, surround */
- 0x03, 0x05, 0x06
-};
-
-static const hda_nid_t alc861_adc_nids[1] = {
- /* ADC0-2 */
- 0x08,
-};
-
-static const struct hda_input_mux alc861_capture_source = {
- .num_items = 5,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x3 },
- { "Line", 0x1 },
- { "CD", 0x4 },
- { "Mixer", 0x5 },
- },
-};
-
-/*
- * configuration and preset
- */
-static const char * const alc861_models[ALC861_MODEL_LAST] = {
- [ALC861_3ST] = "3stack",
- [ALC660_3ST] = "3stack-660",
- [ALC861_3ST_DIG] = "3stack-dig",
- [ALC861_6ST_DIG] = "6stack-dig",
- [ALC861_UNIWILL_M31] = "uniwill-m31",
- [ALC861_TOSHIBA] = "toshiba",
- [ALC861_ASUS] = "asus",
- [ALC861_ASUS_LAPTOP] = "asus-laptop",
- [ALC861_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc861_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC861_3ST),
- SND_PCI_QUIRK(0x1043, 0x1335, "ASUS F2/3", ALC861_ASUS_LAPTOP),
- SND_PCI_QUIRK(0x1043, 0x1338, "ASUS F2/3", ALC861_ASUS_LAPTOP),
- SND_PCI_QUIRK(0x1043, 0x1393, "ASUS", ALC861_ASUS),
- SND_PCI_QUIRK(0x1043, 0x13d7, "ASUS A9rp", ALC861_ASUS_LAPTOP),
- SND_PCI_QUIRK(0x1043, 0x81cb, "ASUS P1-AH2", ALC861_3ST_DIG),
- SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba", ALC861_TOSHIBA),
- /* FIXME: the entry below breaks Toshiba A100 (model=auto works!)
- * Any other models that need this preset?
- */
- /* SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba", ALC861_TOSHIBA), */
- SND_PCI_QUIRK(0x1462, 0x7254, "HP dx2200 (MSI MS-7254)", ALC861_3ST),
- SND_PCI_QUIRK(0x1462, 0x7297, "HP dx2250 (MSI MS-7297)", ALC861_3ST),
- SND_PCI_QUIRK(0x1584, 0x2b01, "Uniwill X40AIx", ALC861_UNIWILL_M31),
- SND_PCI_QUIRK(0x1584, 0x9072, "Uniwill m31", ALC861_UNIWILL_M31),
- SND_PCI_QUIRK(0x1584, 0x9075, "Airis Praxis N1212", ALC861_ASUS_LAPTOP),
- /* FIXME: the below seems conflict */
- /* SND_PCI_QUIRK(0x1584, 0x9075, "Uniwill", ALC861_UNIWILL_M31), */
- SND_PCI_QUIRK(0x1849, 0x0660, "Asrock 939SLI32", ALC660_3ST),
- SND_PCI_QUIRK(0x8086, 0xd600, "Intel", ALC861_3ST),
- {}
-};
-
-static const struct alc_config_preset alc861_presets[] = {
- [ALC861_3ST] = {
- .mixers = { alc861_3ST_mixer },
- .init_verbs = { alc861_threestack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861_dac_nids),
- .dac_nids = alc861_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
- .channel_mode = alc861_threestack_modes,
- .need_dac_fix = 1,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- },
- [ALC861_3ST_DIG] = {
- .mixers = { alc861_base_mixer },
- .init_verbs = { alc861_threestack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861_dac_nids),
- .dac_nids = alc861_dac_nids,
- .dig_out_nid = ALC861_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
- .channel_mode = alc861_threestack_modes,
- .need_dac_fix = 1,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- },
- [ALC861_6ST_DIG] = {
- .mixers = { alc861_base_mixer },
- .init_verbs = { alc861_base_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861_dac_nids),
- .dac_nids = alc861_dac_nids,
- .dig_out_nid = ALC861_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861_8ch_modes),
- .channel_mode = alc861_8ch_modes,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- },
- [ALC660_3ST] = {
- .mixers = { alc861_3ST_mixer },
- .init_verbs = { alc861_threestack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc660_dac_nids),
- .dac_nids = alc660_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
- .channel_mode = alc861_threestack_modes,
- .need_dac_fix = 1,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- },
- [ALC861_UNIWILL_M31] = {
- .mixers = { alc861_uniwill_m31_mixer },
- .init_verbs = { alc861_uniwill_m31_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861_dac_nids),
- .dac_nids = alc861_dac_nids,
- .dig_out_nid = ALC861_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861_uniwill_m31_modes),
- .channel_mode = alc861_uniwill_m31_modes,
- .need_dac_fix = 1,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- },
- [ALC861_TOSHIBA] = {
- .mixers = { alc861_toshiba_mixer },
- .init_verbs = { alc861_base_init_verbs,
- alc861_toshiba_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861_dac_nids),
- .dac_nids = alc861_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
- .channel_mode = alc883_3ST_2ch_modes,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- .unsol_event = alc861_toshiba_unsol_event,
- .init_hook = alc861_toshiba_automute,
- },
- [ALC861_ASUS] = {
- .mixers = { alc861_asus_mixer },
- .init_verbs = { alc861_asus_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861_dac_nids),
- .dac_nids = alc861_dac_nids,
- .dig_out_nid = ALC861_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861_asus_modes),
- .channel_mode = alc861_asus_modes,
- .need_dac_fix = 1,
- .hp_nid = 0x06,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- },
- [ALC861_ASUS_LAPTOP] = {
- .mixers = { alc861_toshiba_mixer, alc861_asus_laptop_mixer },
- .init_verbs = { alc861_asus_init_verbs,
- alc861_asus_laptop_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861_dac_nids),
- .dac_nids = alc861_dac_nids,
- .dig_out_nid = ALC861_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
- .channel_mode = alc883_3ST_2ch_modes,
- .need_dac_fix = 1,
- .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
- .adc_nids = alc861_adc_nids,
- .input_mux = &alc861_capture_source,
- },
-};
-
diff --git a/sound/pci/hda/alc861vd_quirks.c b/sound/pci/hda/alc861vd_quirks.c
deleted file mode 100644
index 8f28450..0000000
--- a/sound/pci/hda/alc861vd_quirks.c
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * ALC660-VD/ALC861-VD quirk models
- * included by patch_realtek.c
- */
-
-/* ALC861-VD models */
-enum {
- ALC861VD_AUTO,
- ALC660VD_3ST,
- ALC660VD_3ST_DIG,
- ALC660VD_ASUS_V1S,
- ALC861VD_3ST,
- ALC861VD_3ST_DIG,
- ALC861VD_6ST_DIG,
- ALC861VD_LENOVO,
- ALC861VD_DALLAS,
- ALC861VD_HP,
- ALC861VD_MODEL_LAST,
-};
-
-#define ALC861VD_DIGOUT_NID 0x06
-
-static const hda_nid_t alc861vd_dac_nids[4] = {
- /* front, surr, clfe, side surr */
- 0x02, 0x03, 0x04, 0x05
-};
-
-/* dac_nids for ALC660vd are in a different order - according to
- * Realtek's driver.
- * This should probably result in a different mixer for 6stack models
- * of ALC660vd codecs, but for now there is only 3stack mixer
- * - and it is the same as in 861vd.
- * adc_nids in ALC660vd are (is) the same as in 861vd
- */
-static const hda_nid_t alc660vd_dac_nids[3] = {
- /* front, rear, clfe, rear_surr */
- 0x02, 0x04, 0x03
-};
-
-static const hda_nid_t alc861vd_adc_nids[1] = {
- /* ADC0 */
- 0x09,
-};
-
-static const hda_nid_t alc861vd_capsrc_nids[1] = { 0x22 };
-
-/* input MUX */
-/* FIXME: should be a matrix-type input source selection */
-static const struct hda_input_mux alc861vd_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static const struct hda_input_mux alc861vd_dallas_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x0 },
- { "Internal Mic", 0x1 },
- },
-};
-
-static const struct hda_input_mux alc861vd_hp_capture_source = {
- .num_items = 2,
- .items = {
- { "Front Mic", 0x0 },
- { "ATAPI Mic", 0x1 },
- },
-};
-
-/*
- * 2ch mode
- */
-static const struct hda_channel_mode alc861vd_3stack_2ch_modes[1] = {
- { 2, NULL }
-};
-
-/*
- * 6ch mode
- */
-static const struct hda_verb alc861vd_6stack_ch6_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
-
-/*
- * 8ch mode
- */
-static const struct hda_verb alc861vd_6stack_ch8_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
-
-static const struct hda_channel_mode alc861vd_6stack_modes[2] = {
- { 6, alc861vd_6stack_ch6_init },
- { 8, alc861vd_6stack_ch8_init },
-};
-
-static const struct snd_kcontrol_new alc861vd_chmode_mixer[] = {
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Channel Mode",
- .info = alc_ch_mode_info,
- .get = alc_ch_mode_get,
- .put = alc_ch_mode_put,
- },
- { } /* end */
-};
-
-/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
- * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
- */
-static const struct snd_kcontrol_new alc861vd_6st_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
-
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0,
- HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0,
- HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
- HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Side Playback Volume", 0x05, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
-
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc861vd_3st_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-
- { } /* end */
-};
-
-static const struct snd_kcontrol_new alc861vd_lenovo_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- /*HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),*/
- HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-
- { } /* end */
-};
-
-/* Pin assignment: Speaker=0x14, HP = 0x15,
- * Mic=0x18, Internal Mic = 0x19, CD = 0x1c, PC Beep = 0x1d
- */
-static const struct snd_kcontrol_new alc861vd_dallas_mixer[] = {
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Boost Volume", 0x19, 0, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
-
-/* Pin assignment: Speaker=0x14, Line-out = 0x15,
- * Front Mic=0x18, ATAPI Mic = 0x19,
- */
-static const struct snd_kcontrol_new alc861vd_hp_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("ATAPI Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-
- { } /* end */
-};
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static const struct hda_verb alc861vd_volume_init_verbs[] = {
- /*
- * Unmute ADC0 and set the default input to mic-in
- */
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of
- * the analog-loopback mixer widget
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- /* Capture mixer: unmute Mic, F-Mic, Line, CD inputs */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
- /*
- * Set up output mixers (0x02 - 0x05)
- */
- /* set vol=0 to output mixers */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- { }
-};
-
-/*
- * 3-stack pin configuration:
- * front = 0x14, mic/clfe = 0x18, HP = 0x19, line/surr = 0x1a, f-mic = 0x1b
- */
-static const struct hda_verb alc861vd_3stack_init_verbs[] = {
- /*
- * Set pin mode and muting
- */
- /* set front pin widgets 0x14 for output */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Front Mic pin: input vref at 80% */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line-2 In: Headphone output (output 0 - 0x0c) */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- { }
-};
-
-/*
- * 6-stack pin configuration:
- */
-static const struct hda_verb alc861vd_6stack_init_verbs[] = {
- /*
- * Set pin mode and muting
- */
- /* set front pin widgets 0x14 for output */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Rear Pin: output 1 (0x0d) */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- /* CLFE Pin: output 2 (0x0e) */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* Side Pin: output 3 (0x0f) */
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
-
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Front Mic pin: input vref at 80% */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line-2 In: Headphone output (output 0 - 0x0c) */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- { }
-};
-
-static const struct hda_verb alc861vd_eapd_verbs[] = {
- {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
- { }
-};
-
-static const struct hda_verb alc861vd_lenovo_unsol_verbs[] = {
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
- {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
- {}
-};
-
-static void alc861vd_lenovo_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x1b;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
-}
-
-static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
-{
- alc_hp_automute(codec);
- alc88x_simple_mic_automute(codec);
-}
-
-static void alc861vd_lenovo_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC_MIC_EVENT:
- alc88x_simple_mic_automute(codec);
- break;
- default:
- alc_sku_unsol_event(codec, res);
- break;
- }
-}
-
-static const struct hda_verb alc861vd_dallas_verbs[] = {
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-
- { } /* end */
-};
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc861vd_dallas_setup(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
-
- spec->autocfg.hp_pins[0] = 0x15;
- spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
-}
-
-/*
- * configuration and preset
- */
-static const char * const alc861vd_models[ALC861VD_MODEL_LAST] = {
- [ALC660VD_3ST] = "3stack-660",
- [ALC660VD_3ST_DIG] = "3stack-660-digout",
- [ALC660VD_ASUS_V1S] = "asus-v1s",
- [ALC861VD_3ST] = "3stack",
- [ALC861VD_3ST_DIG] = "3stack-digout",
- [ALC861VD_6ST_DIG] = "6stack-digout",
- [ALC861VD_LENOVO] = "lenovo",
- [ALC861VD_DALLAS] = "dallas",
- [ALC861VD_HP] = "hp",
- [ALC861VD_AUTO] = "auto",
-};
-
-static const struct snd_pci_quirk alc861vd_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1019, 0xa88d, "Realtek ALC660 demo", ALC660VD_3ST),
- SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP),
- SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST),
- /*SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),*/ /* auto */
- SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC660VD_ASUS_V1S),
- SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG),
- SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
- SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO),
- /*SND_PCI_QUIRK(0x1179, 0xff00, "DALLAS", ALC861VD_DALLAS),*/ /*lenovo*/
- SND_PCI_QUIRK(0x1179, 0xff01, "Toshiba A135", ALC861VD_LENOVO),
- SND_PCI_QUIRK(0x1179, 0xff03, "Toshiba P205", ALC861VD_LENOVO),
- SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_DALLAS),
- SND_PCI_QUIRK(0x1565, 0x820d, "Biostar NF61S SE", ALC861VD_6ST_DIG),
- SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", ALC861VD_LENOVO),
- SND_PCI_QUIRK(0x1849, 0x0862, "ASRock K8NF6G-VSTA", ALC861VD_6ST_DIG),
- {}
-};
-
-static const struct alc_config_preset alc861vd_presets[] = {
- [ALC660VD_3ST] = {
- .mixers = { alc861vd_3st_mixer },
- .init_verbs = { alc861vd_volume_init_verbs,
- alc861vd_3stack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc660vd_dac_nids),
- .dac_nids = alc660vd_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_capture_source,
- },
- [ALC660VD_3ST_DIG] = {
- .mixers = { alc861vd_3st_mixer },
- .init_verbs = { alc861vd_volume_init_verbs,
- alc861vd_3stack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc660vd_dac_nids),
- .dac_nids = alc660vd_dac_nids,
- .dig_out_nid = ALC861VD_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_capture_source,
- },
- [ALC861VD_3ST] = {
- .mixers = { alc861vd_3st_mixer },
- .init_verbs = { alc861vd_volume_init_verbs,
- alc861vd_3stack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861vd_dac_nids),
- .dac_nids = alc861vd_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_capture_source,
- },
- [ALC861VD_3ST_DIG] = {
- .mixers = { alc861vd_3st_mixer },
- .init_verbs = { alc861vd_volume_init_verbs,
- alc861vd_3stack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861vd_dac_nids),
- .dac_nids = alc861vd_dac_nids,
- .dig_out_nid = ALC861VD_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_capture_source,
- },
- [ALC861VD_6ST_DIG] = {
- .mixers = { alc861vd_6st_mixer, alc861vd_chmode_mixer },
- .init_verbs = { alc861vd_volume_init_verbs,
- alc861vd_6stack_init_verbs },
- .num_dacs = ARRAY_SIZE(alc861vd_dac_nids),
- .dac_nids = alc861vd_dac_nids,
- .dig_out_nid = ALC861VD_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861vd_6stack_modes),
- .channel_mode = alc861vd_6stack_modes,
- .input_mux = &alc861vd_capture_source,
- },
- [ALC861VD_LENOVO] = {
- .mixers = { alc861vd_lenovo_mixer },
- .init_verbs = { alc861vd_volume_init_verbs,
- alc861vd_3stack_init_verbs,
- alc861vd_eapd_verbs,
- alc861vd_lenovo_unsol_verbs },
- .num_dacs = ARRAY_SIZE(alc660vd_dac_nids),
- .dac_nids = alc660vd_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_capture_source,
- .unsol_event = alc861vd_lenovo_unsol_event,
- .setup = alc861vd_lenovo_setup,
- .init_hook = alc861vd_lenovo_init_hook,
- },
- [ALC861VD_DALLAS] = {
- .mixers = { alc861vd_dallas_mixer },
- .init_verbs = { alc861vd_dallas_verbs },
- .num_dacs = ARRAY_SIZE(alc861vd_dac_nids),
- .dac_nids = alc861vd_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_dallas_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc861vd_dallas_setup,
- .init_hook = alc_hp_automute,
- },
- [ALC861VD_HP] = {
- .mixers = { alc861vd_hp_mixer },
- .init_verbs = { alc861vd_dallas_verbs, alc861vd_eapd_verbs },
- .num_dacs = ARRAY_SIZE(alc861vd_dac_nids),
- .dac_nids = alc861vd_dac_nids,
- .dig_out_nid = ALC861VD_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_hp_capture_source,
- .unsol_event = alc_sku_unsol_event,
- .setup = alc861vd_dallas_setup,
- .init_hook = alc_hp_automute,
- },
- [ALC660VD_ASUS_V1S] = {
- .mixers = { alc861vd_lenovo_mixer },
- .init_verbs = { alc861vd_volume_init_verbs,
- alc861vd_3stack_init_verbs,
- alc861vd_eapd_verbs,
- alc861vd_lenovo_unsol_verbs },
- .num_dacs = ARRAY_SIZE(alc660vd_dac_nids),
- .dac_nids = alc660vd_dac_nids,
- .dig_out_nid = ALC861VD_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
- .channel_mode = alc861vd_3stack_2ch_modes,
- .input_mux = &alc861vd_capture_source,
- .unsol_event = alc861vd_lenovo_unsol_event,
- .setup = alc861vd_lenovo_setup,
- .init_hook = alc861vd_lenovo_init_hook,
- },
-};
-
diff --git a/sound/pci/hda/alc880_quirks.c b/sound/pci/hda/alc880_quirks.c
index c844d2b..bea22ed 100644
--- a/sound/pci/hda/alc880_quirks.c
+++ b/sound/pci/hda/alc880_quirks.c
@@ -749,8 +749,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x16;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc880_uniwill_init_hook(struct hda_codec *codec)
@@ -781,8 +780,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
@@ -1051,8 +1049,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
/*
@@ -1137,8 +1134,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct snd_kcontrol_new alc880_medion_rim_mixer[] = {
@@ -1188,7 +1184,7 @@
struct alc_spec *spec = codec->spec;
alc_hp_automute(codec);
/* toggle EAPD */
- if (spec->jack_present)
+ if (spec->hp_jack_present)
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0);
else
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 2);
@@ -1210,8 +1206,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
diff --git a/sound/pci/hda/alc882_quirks.c b/sound/pci/hda/alc882_quirks.c
index 617d047..e251514 100644
--- a/sound/pci/hda/alc882_quirks.c
+++ b/sound/pci/hda/alc882_quirks.c
@@ -173,8 +173,7 @@
spec->autocfg.speaker_pins[2] = 0x17;
spec->autocfg.speaker_pins[3] = 0x19;
spec->autocfg.speaker_pins[4] = 0x1a;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc889_intel_init_hook(struct hda_codec *codec)
@@ -191,8 +190,7 @@
spec->autocfg.hp_pins[1] = 0x1b; /* hp */
spec->autocfg.speaker_pins[0] = 0x14; /* speaker */
spec->autocfg.speaker_pins[1] = 0x15; /* bass */
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
/*
@@ -475,8 +473,7 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc888_acer_aspire_6530g_setup(struct hda_codec *codec)
@@ -487,8 +484,7 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc888_acer_aspire_7730g_setup(struct hda_codec *codec)
@@ -499,8 +495,7 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec)
@@ -511,8 +506,7 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x1b;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
#define ALC882_DIGOUT_NID 0x06
@@ -1711,8 +1705,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x18;
spec->autocfg.speaker_pins[1] = 0x1a;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
#define alc885_mb5_setup alc885_imac24_setup
@@ -1721,12 +1714,11 @@
/* Macbook Air 2,1 */
static void alc885_mba21_setup(struct hda_codec *codec)
{
- struct alc_spec *spec = codec->spec;
+ struct alc_spec *spec = codec->spec;
- spec->autocfg.hp_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x18;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ spec->autocfg.hp_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[0] = 0x18;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
@@ -1737,8 +1729,7 @@
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc885_imac91_setup(struct hda_codec *codec)
@@ -1748,8 +1739,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x18;
spec->autocfg.speaker_pins[1] = 0x1a;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct hda_verb alc882_targa_verbs[] = {
@@ -1773,7 +1763,7 @@
struct alc_spec *spec = codec->spec;
alc_hp_automute(codec);
snd_hda_codec_write_cache(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
- spec->jack_present ? 1 : 3);
+ spec->hp_jack_present ? 1 : 3);
}
static void alc882_targa_setup(struct hda_codec *codec)
@@ -1782,8 +1772,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res)
@@ -2187,8 +2176,7 @@
spec->autocfg.hp_pins[0] = 0x1a;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct snd_kcontrol_new alc883_acer_aspire_mixer[] = {
@@ -2341,8 +2329,7 @@
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct hda_verb alc883_mitac_verbs[] = {
@@ -2507,8 +2494,7 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x18;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct hda_verb alc888_3st_hp_verbs[] = {
@@ -2568,8 +2554,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.line_out_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
/* toggle speaker-output according to the hp-jack state */
@@ -2579,8 +2564,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
/* toggle speaker-output according to the hp-jack state */
@@ -2593,8 +2577,7 @@
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
@@ -2623,8 +2606,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc883_haier_w66_setup(struct hda_codec *codec)
@@ -2633,8 +2615,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc883_lenovo_101e_setup(struct hda_codec *codec)
@@ -2644,10 +2625,7 @@
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.line_out_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- spec->automute = 1;
- spec->detect_line = 1;
- spec->automute_lines = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
/* toggle speaker-output according to the hp-jack state */
@@ -2658,8 +2636,7 @@
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
spec->autocfg.speaker_pins[1] = 0x16;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct hda_verb alc883_acer_eapd_verbs[] = {
@@ -2689,8 +2666,7 @@
spec->autocfg.speaker_pins[1] = 0x15;
spec->autocfg.speaker_pins[2] = 0x16;
spec->autocfg.speaker_pins[3] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc888_lenovo_sky_setup(struct hda_codec *codec)
@@ -2703,8 +2679,7 @@
spec->autocfg.speaker_pins[2] = 0x16;
spec->autocfg.speaker_pins[3] = 0x17;
spec->autocfg.speaker_pins[4] = 0x1a;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static void alc883_vaiott_setup(struct hda_codec *codec)
@@ -2714,8 +2689,7 @@
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x17;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct hda_verb alc888_asus_m90v_verbs[] = {
@@ -2739,8 +2713,7 @@
spec->ext_mic_pin = 0x18;
spec->int_mic_pin = 0x19;
spec->auto_mic = 1;
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_AMP;
+ alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
}
static const struct hda_verb alc888_asus_eee1601_verbs[] = {
diff --git a/sound/pci/hda/alc_quirks.c b/sound/pci/hda/alc_quirks.c
index 2be1129..a18952e 100644
--- a/sound/pci/hda/alc_quirks.c
+++ b/sound/pci/hda/alc_quirks.c
@@ -453,6 +453,19 @@
alc_fixup_autocfg_pin_nums(codec);
}
+static void alc_simple_setup_automute(struct alc_spec *spec, int mode)
+{
+ int lo_pin = spec->autocfg.line_out_pins[0];
+
+ if (lo_pin == spec->autocfg.speaker_pins[0] ||
+ lo_pin == spec->autocfg.hp_pins[0])
+ lo_pin = 0;
+ spec->automute_mode = mode;
+ spec->detect_hp = !!spec->autocfg.hp_pins[0];
+ spec->detect_lo = !!lo_pin;
+ spec->automute_lo = spec->automute_lo_possible = !!lo_pin;
+ spec->automute_speaker = spec->automute_speaker_possible = !!spec->autocfg.speaker_pins[0];
+}
/* auto-toggle front mic */
static void alc88x_simple_mic_automute(struct hda_codec *codec)
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index f3aefef..1715e8b 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -34,6 +34,9 @@
#include "hda_beep.h"
#include <sound/hda_hwdep.h>
+#define CREATE_TRACE_POINTS
+#include "hda_trace.h"
+
/*
* vendor / preset table
*/
@@ -208,15 +211,19 @@
again:
snd_hda_power_up(codec);
mutex_lock(&bus->cmd_mutex);
+ trace_hda_send_cmd(codec, cmd);
err = bus->ops.command(bus, cmd);
- if (!err && res)
+ if (!err && res) {
*res = bus->ops.get_response(bus, codec->addr);
+ trace_hda_get_response(codec, *res);
+ }
mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
if (res && *res == -1 && bus->rirb_error) {
if (bus->response_reset) {
snd_printd("hda_codec: resetting BUS due to "
"fatal communication error\n");
+ trace_hda_bus_reset(bus);
bus->ops.bus_reset(bus);
}
goto again;
@@ -607,6 +614,7 @@
struct hda_bus_unsolicited *unsol;
unsigned int wp;
+ trace_hda_unsol_event(bus, res, res_ex);
unsol = bus->unsol;
if (!unsol)
return 0;
@@ -1483,8 +1491,11 @@
struct hda_cvt_setup *q)
{
hda_nid_t nid = q->nid;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CHANNEL_STREAMID, 0);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, 0);
+ if (q->stream_tag || q->channel_id)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CHANNEL_STREAMID, 0);
+ if (q->format_id)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, 0
+);
memset(q, 0, sizeof(*q));
q->nid = nid;
}
@@ -1689,6 +1700,29 @@
EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps);
/**
+ * snd_hda_override_pin_caps - Override the pin capabilities
+ * @codec: the CODEC
+ * @nid: the NID to override
+ * @caps: the capability bits to set
+ *
+ * Override the cached PIN capabilitiy bits value by the given one.
+ *
+ * Returns zero if successful or a negative error code.
+ */
+int snd_hda_override_pin_caps(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int caps)
+{
+ struct hda_amp_info *info;
+ info = get_alloc_amp_hash(codec, HDA_HASH_PINCAP_KEY(nid));
+ if (!info)
+ return -ENOMEM;
+ info->amp_caps = caps;
+ info->head.val |= INFO_AMP_CAPS;
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_override_pin_caps);
+
+/**
* snd_hda_pin_sense - execute pin sense measurement
* @codec: the CODEC to sense
* @nid: the pin NID to sense
@@ -4087,6 +4121,7 @@
return;
}
+ trace_hda_power_down(codec);
hda_call_codec_suspend(codec);
if (bus->ops.pm_notify)
bus->ops.pm_notify(bus);
@@ -4125,6 +4160,7 @@
if (codec->power_on || codec->power_transition)
return;
+ trace_hda_power_up(codec);
snd_hda_update_power_acct(codec);
codec->power_on = 1;
codec->power_jiffies = jiffies;
@@ -4537,6 +4573,11 @@
snd_hda_codec_setup_stream(codec, mout->hp_nid, stream_tag,
0, format);
/* extra outputs copied from front */
+ for (i = 0; i < ARRAY_SIZE(mout->hp_out_nid); i++)
+ if (!mout->no_share_stream && mout->hp_out_nid[i])
+ snd_hda_codec_setup_stream(codec,
+ mout->hp_out_nid[i],
+ stream_tag, 0, format);
for (i = 0; i < ARRAY_SIZE(mout->extra_out_nid); i++)
if (!mout->no_share_stream && mout->extra_out_nid[i])
snd_hda_codec_setup_stream(codec,
@@ -4569,6 +4610,10 @@
snd_hda_codec_cleanup_stream(codec, nids[i]);
if (mout->hp_nid)
snd_hda_codec_cleanup_stream(codec, mout->hp_nid);
+ for (i = 0; i < ARRAY_SIZE(mout->hp_out_nid); i++)
+ if (mout->hp_out_nid[i])
+ snd_hda_codec_cleanup_stream(codec,
+ mout->hp_out_nid[i]);
for (i = 0; i < ARRAY_SIZE(mout->extra_out_nid); i++)
if (mout->extra_out_nid[i])
snd_hda_codec_cleanup_stream(codec,
@@ -4649,6 +4694,27 @@
}
}
+/* Reorder the surround channels
+ * ALSA sequence is front/surr/clfe/side
+ * HDA sequence is:
+ * 4-ch: front/surr => OK as it is
+ * 6-ch: front/clfe/surr
+ * 8-ch: front/clfe/rear/side|fc
+ */
+static void reorder_outputs(unsigned int nums, hda_nid_t *pins)
+{
+ hda_nid_t nid;
+
+ switch (nums) {
+ case 3:
+ case 4:
+ nid = pins[1];
+ pins[1] = pins[2];
+ pins[2] = nid;
+ break;
+ }
+}
+
/*
* Parse all pin widgets and store the useful pin nids to cfg
*
@@ -4666,12 +4732,13 @@
* The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
* respectively.
*/
-int snd_hda_parse_pin_def_config(struct hda_codec *codec,
- struct auto_pin_cfg *cfg,
- const hda_nid_t *ignore_nids)
+int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
+ struct auto_pin_cfg *cfg,
+ const hda_nid_t *ignore_nids,
+ unsigned int cond_flags)
{
hda_nid_t nid, end_nid;
- short seq, assoc_line_out, assoc_speaker;
+ short seq, assoc_line_out;
short sequences_line_out[ARRAY_SIZE(cfg->line_out_pins)];
short sequences_speaker[ARRAY_SIZE(cfg->speaker_pins)];
short sequences_hp[ARRAY_SIZE(cfg->hp_pins)];
@@ -4682,7 +4749,7 @@
memset(sequences_line_out, 0, sizeof(sequences_line_out));
memset(sequences_speaker, 0, sizeof(sequences_speaker));
memset(sequences_hp, 0, sizeof(sequences_hp));
- assoc_line_out = assoc_speaker = 0;
+ assoc_line_out = 0;
end_nid = codec->start_nid + codec->num_nodes;
for (nid = codec->start_nid; nid < end_nid; nid++) {
@@ -4734,16 +4801,10 @@
case AC_JACK_SPEAKER:
seq = get_defcfg_sequence(def_conf);
assoc = get_defcfg_association(def_conf);
- if (!assoc)
- continue;
- if (!assoc_speaker)
- assoc_speaker = assoc;
- else if (assoc_speaker != assoc)
- continue;
if (cfg->speaker_outs >= ARRAY_SIZE(cfg->speaker_pins))
continue;
cfg->speaker_pins[cfg->speaker_outs] = nid;
- sequences_speaker[cfg->speaker_outs] = seq;
+ sequences_speaker[cfg->speaker_outs] = (assoc << 4) | seq;
cfg->speaker_outs++;
break;
case AC_JACK_HP_OUT:
@@ -4792,7 +4853,8 @@
* If no line-out is defined but multiple HPs are found,
* some of them might be the real line-outs.
*/
- if (!cfg->line_outs && cfg->hp_outs > 1) {
+ if (!cfg->line_outs && cfg->hp_outs > 1 &&
+ !(cond_flags & HDA_PINCFG_NO_HP_FIXUP)) {
int i = 0;
while (i < cfg->hp_outs) {
/* The real HPs should have the sequence 0x0f */
@@ -4829,7 +4891,8 @@
* FIX-UP: if no line-outs are detected, try to use speaker or HP pin
* as a primary output
*/
- if (!cfg->line_outs) {
+ if (!cfg->line_outs &&
+ !(cond_flags & HDA_PINCFG_NO_LO_FIXUP)) {
if (cfg->speaker_outs) {
cfg->line_outs = cfg->speaker_outs;
memcpy(cfg->line_out_pins, cfg->speaker_pins,
@@ -4847,21 +4910,9 @@
}
}
- /* Reorder the surround channels
- * ALSA sequence is front/surr/clfe/side
- * HDA sequence is:
- * 4-ch: front/surr => OK as it is
- * 6-ch: front/clfe/surr
- * 8-ch: front/clfe/rear/side|fc
- */
- switch (cfg->line_outs) {
- case 3:
- case 4:
- nid = cfg->line_out_pins[1];
- cfg->line_out_pins[1] = cfg->line_out_pins[2];
- cfg->line_out_pins[2] = nid;
- break;
- }
+ reorder_outputs(cfg->line_outs, cfg->line_out_pins);
+ reorder_outputs(cfg->hp_outs, cfg->hp_pins);
+ reorder_outputs(cfg->speaker_outs, cfg->speaker_pins);
sort_autocfg_input_pins(cfg);
@@ -4899,7 +4950,7 @@
return 0;
}
-EXPORT_SYMBOL_HDA(snd_hda_parse_pin_def_config);
+EXPORT_SYMBOL_HDA(snd_hda_parse_pin_defcfg);
int snd_hda_get_input_pin_attr(unsigned int def_conf)
{
@@ -5158,30 +5209,6 @@
EXPORT_SYMBOL_HDA(snd_array_free);
/**
- * snd_print_pcm_rates - Print the supported PCM rates to the string buffer
- * @pcm: PCM caps bits
- * @buf: the string buffer to write
- * @buflen: the max buffer length
- *
- * used by hda_proc.c and hda_eld.c
- */
-void snd_print_pcm_rates(int pcm, char *buf, int buflen)
-{
- static unsigned int rates[] = {
- 8000, 11025, 16000, 22050, 32000, 44100, 48000, 88200,
- 96000, 176400, 192000, 384000
- };
- int i, j;
-
- for (i = 0, j = 0; i < ARRAY_SIZE(rates); i++)
- if (pcm & (1 << i))
- j += snprintf(buf + j, buflen - j, " %d", rates[i]);
-
- buf[j] = '\0'; /* necessary when j == 0 */
-}
-EXPORT_SYMBOL_HDA(snd_print_pcm_rates);
-
-/**
* snd_print_pcm_bits - Print the supported PCM fmt bits to the string buffer
* @pcm: PCM caps bits
* @buf: the string buffer to write
@@ -5222,6 +5249,8 @@
return "Mic";
case SND_JACK_LINEOUT:
return "Line-out";
+ case SND_JACK_LINEIN:
+ return "Line-in";
case SND_JACK_HEADSET:
return "Headset";
case SND_JACK_VIDEOOUT:
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index c34f730..1c8ddf5 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -318,6 +318,11 @@
int size;
unsigned char *buf;
+ /*
+ * ELD size is initialized to zero in caller function. If no errors and
+ * ELD is valid, actual eld_size is assigned in hdmi_update_eld()
+ */
+
if (!eld->eld_valid)
return -ENOENT;
@@ -327,14 +332,13 @@
snd_printd(KERN_INFO "HDMI: ELD buf size is 0, force 128\n");
size = 128;
}
- if (size < ELD_FIXED_BYTES || size > PAGE_SIZE) {
+ if (size < ELD_FIXED_BYTES || size > ELD_MAX_SIZE) {
snd_printd(KERN_INFO "HDMI: invalid ELD buf size %d\n", size);
return -ERANGE;
}
- buf = kmalloc(size, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
+ /* set ELD buffer */
+ buf = eld->eld_buffer;
for (i = 0; i < size; i++) {
unsigned int val = hdmi_get_eld_data(codec, nid, i);
@@ -356,10 +360,31 @@
ret = hdmi_update_eld(eld, buf, size);
error:
- kfree(buf);
return ret;
}
+/**
+ * SNDRV_PCM_RATE_* and AC_PAR_PCM values don't match, print correct rates with
+ * hdmi-specific routine.
+ */
+static void hdmi_print_pcm_rates(int pcm, char *buf, int buflen)
+{
+ static unsigned int alsa_rates[] = {
+ 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 88200,
+ 96000, 176400, 192000, 384000
+ };
+ int i, j;
+
+ for (i = 0, j = 0; i < ARRAY_SIZE(alsa_rates); i++)
+ if (pcm & (1 << i))
+ j += snprintf(buf + j, buflen - j, " %d",
+ alsa_rates[i]);
+
+ buf[j] = '\0'; /* necessary when j == 0 */
+}
+
+#define SND_PRINT_RATES_ADVISED_BUFSIZE 80
+
static void hdmi_show_short_audio_desc(struct cea_sad *a)
{
char buf[SND_PRINT_RATES_ADVISED_BUFSIZE];
@@ -368,7 +393,7 @@
if (!a->format)
return;
- snd_print_pcm_rates(a->rates, buf, sizeof(buf));
+ hdmi_print_pcm_rates(a->rates, buf, sizeof(buf));
if (a->format == AUDIO_CODING_TYPE_LPCM)
snd_print_pcm_bits(a->sample_bits, buf2 + 8, sizeof(buf2) - 8);
@@ -427,7 +452,7 @@
i, a->format, cea_audio_coding_type_names[a->format]);
snd_iprintf(buffer, "sad%d_channels\t\t%d\n", i, a->channels);
- snd_print_pcm_rates(a->rates, buf, sizeof(buf));
+ hdmi_print_pcm_rates(a->rates, buf, sizeof(buf));
snd_iprintf(buffer, "sad%d_rates\t\t[0x%x]%s\n", i, a->rates, buf);
if (a->format == AUDIO_CODING_TYPE_LPCM) {
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index bf3ced5..72e5885 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -643,14 +643,14 @@
static void parse_codec_mode(char *buf, struct hda_bus *bus,
struct hda_codec **codecp)
{
- unsigned int vendorid, subid, caddr;
+ int vendorid, subid, caddr;
struct hda_codec *codec;
*codecp = NULL;
if (sscanf(buf, "%i %i %i", &vendorid, &subid, &caddr) == 3) {
list_for_each_entry(codec, &bus->codec_list, list) {
- if (codec->vendor_id == vendorid &&
- codec->subsystem_id == subid &&
+ if ((vendorid <= 0 || codec->vendor_id == vendorid) &&
+ (subid <= 0 || codec->subsystem_id == subid) &&
codec->addr == caddr) {
*codecp = codec;
break;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 191284a..bd7fc99 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -34,7 +34,6 @@
*
*/
-#include <asm/io.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -46,6 +45,12 @@
#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/reboot.h>
+#include <linux/io.h>
+#ifdef CONFIG_X86
+/* for snoop control */
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+#endif
#include <sound/core.h>
#include <sound/initval.h>
#include "hda_codec.h"
@@ -116,6 +121,22 @@
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#endif
+static int align_buffer_size = 1;
+module_param(align_buffer_size, bool, 0644);
+MODULE_PARM_DESC(align_buffer_size,
+ "Force buffer and period sizes to be multiple of 128 bytes.");
+
+#ifdef CONFIG_X86
+static bool hda_snoop = true;
+module_param_named(snoop, hda_snoop, bool, 0444);
+MODULE_PARM_DESC(snoop, "Enable/disable snooping");
+#define azx_snoop(chip) (chip)->snoop
+#else
+#define hda_snoop true
+#define azx_snoop(chip) true
+#endif
+
+
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
"{Intel, ICH6M},"
@@ -360,7 +381,7 @@
*/
unsigned char stream_tag; /* assigned stream */
unsigned char index; /* stream index */
- int device; /* last device number assigned to */
+ int assigned_key; /* last device# key assigned to */
unsigned int opened :1;
unsigned int running :1;
@@ -371,6 +392,7 @@
* when link position is not greater than FIFO size
*/
unsigned int insufficient :1;
+ unsigned int wc_marked:1;
};
/* CORB/RIRB */
@@ -438,6 +460,7 @@
unsigned int msi :1;
unsigned int irq_pending_warned :1;
unsigned int probing :1; /* codec probing phase */
+ unsigned int snoop:1;
/* for debugging */
unsigned int last_cmd[AZX_MAX_CODECS];
@@ -481,6 +504,7 @@
#define AZX_DCAPS_NO_64BIT (1 << 18) /* No 64bit address */
#define AZX_DCAPS_SYNC_WRITE (1 << 19) /* sync each cmd write */
#define AZX_DCAPS_OLD_SSYNC (1 << 20) /* Old SSYNC reg for ICH */
+#define AZX_DCAPS_BUFSIZE (1 << 21) /* no buffer size alignment */
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
@@ -542,6 +566,45 @@
/* for pcm support */
#define get_azx_dev(substream) (substream->runtime->private_data)
+#ifdef CONFIG_X86
+static void __mark_pages_wc(struct azx *chip, void *addr, size_t size, bool on)
+{
+ if (azx_snoop(chip))
+ return;
+ if (addr && size) {
+ int pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ if (on)
+ set_memory_wc((unsigned long)addr, pages);
+ else
+ set_memory_wb((unsigned long)addr, pages);
+ }
+}
+
+static inline void mark_pages_wc(struct azx *chip, struct snd_dma_buffer *buf,
+ bool on)
+{
+ __mark_pages_wc(chip, buf->area, buf->bytes, on);
+}
+static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev,
+ struct snd_pcm_runtime *runtime, bool on)
+{
+ if (azx_dev->wc_marked != on) {
+ __mark_pages_wc(chip, runtime->dma_area, runtime->dma_bytes, on);
+ azx_dev->wc_marked = on;
+ }
+}
+#else
+/* NOP for other archs */
+static inline void mark_pages_wc(struct azx *chip, struct snd_dma_buffer *buf,
+ bool on)
+{
+}
+static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev,
+ struct snd_pcm_runtime *runtime, bool on)
+{
+}
+#endif
+
static int azx_acquire_irq(struct azx *chip, int do_disconnect);
static int azx_send_cmd(struct hda_bus *bus, unsigned int val);
/*
@@ -563,6 +626,7 @@
snd_printk(KERN_ERR SFX "cannot allocate CORB/RIRB\n");
return err;
}
+ mark_pages_wc(chip, &chip->rb, true);
return 0;
}
@@ -1079,7 +1143,15 @@
static void azx_init_pci(struct azx *chip)
{
- unsigned short snoop;
+ /* force to non-snoop mode for a new VIA controller when BIOS is set */
+ if (chip->snoop && chip->driver_type == AZX_DRIVER_VIA) {
+ u8 snoop;
+ pci_read_config_byte(chip->pci, 0x42, &snoop);
+ if (!(snoop & 0x80) && chip->pci->revision == 0x30) {
+ chip->snoop = 0;
+ snd_printdd(SFX "Force to non-snoop mode\n");
+ }
+ }
/* Clear bits 0-2 of PCI register TCSEL (at offset 0x44)
* TCSEL == Traffic Class Select Register, which sets PCI express QOS
@@ -1096,15 +1168,15 @@
* we need to enable snoop.
*/
if (chip->driver_caps & AZX_DCAPS_ATI_SNOOP) {
- snd_printdd(SFX "Enabling ATI snoop\n");
+ snd_printdd(SFX "Setting ATI snoop: %d\n", azx_snoop(chip));
update_pci_byte(chip->pci,
- ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR,
- 0x07, ATI_SB450_HDAUDIO_ENABLE_SNOOP);
+ ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, 0x07,
+ azx_snoop(chip) ? ATI_SB450_HDAUDIO_ENABLE_SNOOP : 0);
}
/* For NVIDIA HDA, enable snoop */
if (chip->driver_caps & AZX_DCAPS_NVIDIA_SNOOP) {
- snd_printdd(SFX "Enabling Nvidia snoop\n");
+ snd_printdd(SFX "Setting Nvidia snoop: %d\n", azx_snoop(chip));
update_pci_byte(chip->pci,
NVIDIA_HDA_TRANSREG_ADDR,
0x0f, NVIDIA_HDA_ENABLE_COHBITS);
@@ -1118,16 +1190,20 @@
/* Enable SCH/PCH snoop if needed */
if (chip->driver_caps & AZX_DCAPS_SCH_SNOOP) {
+ unsigned short snoop;
pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
- if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) {
- pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC,
- snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP));
+ if ((!azx_snoop(chip) && !(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)) ||
+ (azx_snoop(chip) && (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP))) {
+ snoop &= ~INTEL_SCH_HDA_DEVC_NOSNOOP;
+ if (!azx_snoop(chip))
+ snoop |= INTEL_SCH_HDA_DEVC_NOSNOOP;
+ pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, snoop);
pci_read_config_word(chip->pci,
INTEL_SCH_HDA_DEVC, &snoop);
- snd_printdd(SFX "HDA snoop disabled, enabling ... %s\n",
- (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)
- ? "Failed" : "OK");
}
+ snd_printdd(SFX "SCH snoop: %s\n",
+ (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)
+ ? "Disabled" : "Enabled");
}
}
@@ -1334,12 +1410,16 @@
*/
static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev)
{
+ unsigned int val;
/* make sure the run bit is zero for SD */
azx_stream_clear(chip, azx_dev);
/* program the stream_tag */
- azx_sd_writel(azx_dev, SD_CTL,
- (azx_sd_readl(azx_dev, SD_CTL) & ~SD_CTL_STREAM_TAG_MASK)|
- (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT));
+ val = azx_sd_readl(azx_dev, SD_CTL);
+ val = (val & ~SD_CTL_STREAM_TAG_MASK) |
+ (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT);
+ if (!azx_snoop(chip))
+ val |= SD_CTL_TRAFFIC_PRIO;
+ azx_sd_writel(azx_dev, SD_CTL, val);
/* program the length of samples in cyclic buffer */
azx_sd_writel(azx_dev, SD_CBL, azx_dev->bufsize);
@@ -1533,6 +1613,9 @@
{
int dev, i, nums;
struct azx_dev *res = NULL;
+ /* make a non-zero unique key for the substream */
+ int key = (substream->pcm->device << 16) | (substream->number << 2) |
+ (substream->stream + 1);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
dev = chip->playback_index_offset;
@@ -1544,12 +1627,12 @@
for (i = 0; i < nums; i++, dev++)
if (!chip->azx_dev[dev].opened) {
res = &chip->azx_dev[dev];
- if (res->device == substream->pcm->device)
+ if (res->assigned_key == key)
break;
}
if (res) {
res->opened = 1;
- res->device = substream->pcm->device;
+ res->assigned_key = key;
}
return res;
}
@@ -1599,6 +1682,7 @@
struct snd_pcm_runtime *runtime = substream->runtime;
unsigned long flags;
int err;
+ int buff_step;
mutex_lock(&chip->open_mutex);
azx_dev = azx_assign_device(chip, substream);
@@ -1613,10 +1697,25 @@
runtime->hw.rates = hinfo->rates;
snd_pcm_limit_hw_rates(runtime);
snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+ if (align_buffer_size)
+ /* constrain buffer sizes to be multiple of 128
+ bytes. This is more efficient in terms of memory
+ access but isn't required by the HDA spec and
+ prevents users from specifying exact period/buffer
+ sizes. For example for 44.1kHz, a period size set
+ to 20ms will be rounded to 19.59ms. */
+ buff_step = 128;
+ else
+ /* Don't enforce steps on buffer sizes, still need to
+ be multiple of 4 bytes (HDA spec). Tested on Intel
+ HDA controllers, may not work on all devices where
+ option needs to be disabled */
+ buff_step = 4;
+
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
- 128);
+ buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
- 128);
+ buff_step);
snd_hda_power_up(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
@@ -1671,19 +1770,30 @@
static int azx_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
+ struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
+ struct azx *chip = apcm->chip;
+ struct snd_pcm_runtime *runtime = substream->runtime;
struct azx_dev *azx_dev = get_azx_dev(substream);
+ int ret;
+ mark_runtime_wc(chip, azx_dev, runtime, false);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
azx_dev->format_val = 0;
- return snd_pcm_lib_malloc_pages(substream,
+ ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
+ if (ret < 0)
+ return ret;
+ mark_runtime_wc(chip, azx_dev, runtime, true);
+ return ret;
}
static int azx_pcm_hw_free(struct snd_pcm_substream *substream)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx_dev *azx_dev = get_azx_dev(substream);
+ struct azx *chip = apcm->chip;
+ struct snd_pcm_runtime *runtime = substream->runtime;
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
/* reset BDL address */
@@ -1696,6 +1806,7 @@
snd_hda_codec_cleanup(apcm->codec, hinfo, substream);
+ mark_runtime_wc(chip, azx_dev, runtime, false);
return snd_pcm_lib_free_pages(substream);
}
@@ -2055,6 +2166,20 @@
spin_unlock_irq(&chip->reg_lock);
}
+#ifdef CONFIG_X86
+static int azx_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *area)
+{
+ struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
+ struct azx *chip = apcm->chip;
+ if (!azx_snoop(chip))
+ area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
+ return snd_pcm_lib_default_mmap(substream, area);
+}
+#else
+#define azx_pcm_mmap NULL
+#endif
+
static struct snd_pcm_ops azx_pcm_ops = {
.open = azx_pcm_open,
.close = azx_pcm_close,
@@ -2064,6 +2189,7 @@
.prepare = azx_pcm_prepare,
.trigger = azx_pcm_trigger,
.pointer = azx_pcm_pointer,
+ .mmap = azx_pcm_mmap,
.page = snd_pcm_sgbuf_ops_page,
};
@@ -2344,13 +2470,19 @@
if (chip->azx_dev) {
for (i = 0; i < chip->num_streams; i++)
- if (chip->azx_dev[i].bdl.area)
+ if (chip->azx_dev[i].bdl.area) {
+ mark_pages_wc(chip, &chip->azx_dev[i].bdl, false);
snd_dma_free_pages(&chip->azx_dev[i].bdl);
+ }
}
- if (chip->rb.area)
+ if (chip->rb.area) {
+ mark_pages_wc(chip, &chip->rb, false);
snd_dma_free_pages(&chip->rb);
- if (chip->posbuf.area)
+ }
+ if (chip->posbuf.area) {
+ mark_pages_wc(chip, &chip->posbuf, false);
snd_dma_free_pages(&chip->posbuf);
+ }
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip->azx_dev);
@@ -2546,6 +2678,7 @@
check_probe_mask(chip, dev);
chip->single_cmd = single_cmd;
+ chip->snoop = hda_snoop;
if (bdl_pos_adj[dev] < 0) {
switch (chip->driver_type) {
@@ -2618,6 +2751,10 @@
gcap &= ~ICH6_GCAP_64OK;
}
+ /* disable buffer size rounding to 128-byte multiples if supported */
+ if (chip->driver_caps & AZX_DCAPS_BUFSIZE)
+ align_buffer_size = 0;
+
/* allow 64bit DMA address if supported by H/W */
if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
@@ -2669,6 +2806,7 @@
snd_printk(KERN_ERR SFX "cannot allocate BDL\n");
goto errout;
}
+ mark_pages_wc(chip, &chip->azx_dev[i].bdl, true);
}
/* allocate memory for the position buffer */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
@@ -2678,6 +2816,7 @@
snd_printk(KERN_ERR SFX "cannot allocate posbuf\n");
goto errout;
}
+ mark_pages_wc(chip, &chip->posbuf, true);
/* allocate CORB/RIRB */
err = azx_alloc_cmd_io(chip);
if (err < 0)
@@ -2819,37 +2958,49 @@
static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
/* CPT */
{ PCI_DEVICE(0x8086, 0x1c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
+ AZX_DCAPS_BUFSIZE },
/* PBG */
{ PCI_DEVICE(0x8086, 0x1d20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
+ AZX_DCAPS_BUFSIZE},
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
+ AZX_DCAPS_BUFSIZE},
/* SCH */
{ PCI_DEVICE(0x8086, 0x811b),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
+ AZX_DCAPS_BUFSIZE},
{ PCI_DEVICE(0x8086, 0x2668),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ICH6 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ICH6 */
{ PCI_DEVICE(0x8086, 0x27d8),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ICH7 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ICH7 */
{ PCI_DEVICE(0x8086, 0x269a),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ESB2 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ESB2 */
{ PCI_DEVICE(0x8086, 0x284b),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ICH8 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ICH8 */
{ PCI_DEVICE(0x8086, 0x293e),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ICH9 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ICH9 */
{ PCI_DEVICE(0x8086, 0x293f),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ICH9 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ICH9 */
{ PCI_DEVICE(0x8086, 0x3a3e),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ICH10 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ICH10 */
{ PCI_DEVICE(0x8086, 0x3a6e),
- .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC }, /* ICH10 */
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
+ AZX_DCAPS_BUFSIZE }, /* ICH10 */
/* Generic Intel */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
- .driver_data = AZX_DRIVER_ICH },
+ .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_BUFSIZE },
/* ATI SB 450/600/700/800/900 */
{ PCI_DEVICE(0x1002, 0x437b),
.driver_data = AZX_DRIVER_ATI | AZX_DCAPS_PRESET_ATI_SB },
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 2e7ac31..81e12c0 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -267,11 +267,14 @@
enum { HDA_FRONT, HDA_REAR, HDA_CLFE, HDA_SIDE }; /* index for dac_nidx */
enum { HDA_DIG_NONE, HDA_DIG_EXCLUSIVE, HDA_DIG_ANALOG_DUP }; /* dig_out_used */
+#define HDA_MAX_OUTS 5
+
struct hda_multi_out {
int num_dacs; /* # of DACs, must be more than 1 */
const hda_nid_t *dac_nids; /* DAC list */
hda_nid_t hp_nid; /* optional DAC for HP, 0 when not exists */
- hda_nid_t extra_out_nid[3]; /* optional DACs, 0 when not exists */
+ hda_nid_t hp_out_nid[HDA_MAX_OUTS]; /* DACs for multiple HPs */
+ hda_nid_t extra_out_nid[HDA_MAX_OUTS]; /* other (e.g. speaker) DACs */
hda_nid_t dig_out_nid; /* digital out audio widget */
const hda_nid_t *slave_dig_outs;
int max_channels; /* currently supported analog channels */
@@ -333,9 +336,6 @@
static inline int snd_hda_codec_proc_new(struct hda_codec *codec) { return 0; }
#endif
-#define SND_PRINT_RATES_ADVISED_BUFSIZE 80
-void snd_print_pcm_rates(int pcm, char *buf, int buflen);
-
#define SND_PRINT_BITS_ADVISED_BUFSIZE 16
void snd_print_pcm_bits(int pcm, char *buf, int buflen);
@@ -385,7 +385,7 @@
AUTO_PIN_HP_OUT
};
-#define AUTO_CFG_MAX_OUTS 5
+#define AUTO_CFG_MAX_OUTS HDA_MAX_OUTS
#define AUTO_CFG_MAX_INS 8
struct auto_pin_cfg_item {
@@ -443,9 +443,18 @@
#define get_defcfg_device(cfg) \
((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
-int snd_hda_parse_pin_def_config(struct hda_codec *codec,
- struct auto_pin_cfg *cfg,
- const hda_nid_t *ignore_nids);
+/* bit-flags for snd_hda_parse_pin_def_config() behavior */
+#define HDA_PINCFG_NO_HP_FIXUP (1 << 0) /* no HP-split */
+#define HDA_PINCFG_NO_LO_FIXUP (1 << 1) /* don't take other outs as LO */
+
+int snd_hda_parse_pin_defcfg(struct hda_codec *codec,
+ struct auto_pin_cfg *cfg,
+ const hda_nid_t *ignore_nids,
+ unsigned int cond_flags);
+
+/* older function */
+#define snd_hda_parse_pin_def_config(codec, cfg, ignore) \
+ snd_hda_parse_pin_defcfg(codec, cfg, ignore, 0)
/* amp values */
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
@@ -492,6 +501,8 @@
int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
unsigned int caps);
u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid);
+int snd_hda_override_pin_caps(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int caps);
u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid);
int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid);
@@ -589,7 +600,8 @@
#define get_amp_nid_(pv) ((pv) & 0xffff)
#define get_amp_nid(kc) get_amp_nid_((kc)->private_value)
#define get_amp_channels(kc) (((kc)->private_value >> 16) & 0x3)
-#define get_amp_direction(kc) (((kc)->private_value >> 18) & 0x1)
+#define get_amp_direction_(pv) (((pv) >> 18) & 0x1)
+#define get_amp_direction(kc) get_amp_direction_((kc)->private_value)
#define get_amp_index(kc) (((kc)->private_value >> 19) & 0xf)
#define get_amp_offset(kc) (((kc)->private_value >> 23) & 0x3f)
#define get_amp_min_mute(kc) (((kc)->private_value >> 29) & 0x1)
@@ -607,6 +619,7 @@
};
#define ELD_FIXED_BYTES 20
+#define ELD_MAX_SIZE 256
#define ELD_MAX_MNL 16
#define ELD_MAX_SAD 16
@@ -631,6 +644,7 @@
int spk_alloc;
int sad_count;
struct cea_sad sad[ELD_MAX_SAD];
+ char eld_buffer[ELD_MAX_SIZE];
#ifdef CONFIG_PROC_FS
struct snd_info_entry *proc_entry;
#endif
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 2be57b0..2c981b5 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -152,12 +152,18 @@
static void print_pcm_rates(struct snd_info_buffer *buffer, unsigned int pcm)
{
- char buf[SND_PRINT_RATES_ADVISED_BUFSIZE];
+ static unsigned int rates[] = {
+ 8000, 11025, 16000, 22050, 32000, 44100, 48000, 88200,
+ 96000, 176400, 192000, 384000
+ };
+ int i;
pcm &= AC_SUPPCM_RATES;
snd_iprintf(buffer, " rates [0x%x]:", pcm);
- snd_print_pcm_rates(pcm, buf, sizeof(buf));
- snd_iprintf(buffer, "%s\n", buf);
+ for (i = 0; i < ARRAY_SIZE(rates); i++)
+ if (pcm & (1 << i))
+ snd_iprintf(buffer, " %d", rates[i]);
+ snd_iprintf(buffer, "\n");
}
static void print_pcm_bits(struct snd_info_buffer *buffer, unsigned int pcm)
diff --git a/sound/pci/hda/hda_trace.h b/sound/pci/hda/hda_trace.h
new file mode 100644
index 0000000..9884871
--- /dev/null
+++ b/sound/pci/hda/hda_trace.h
@@ -0,0 +1,117 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hda
+#define TRACE_INCLUDE_FILE hda_trace
+
+#if !defined(_TRACE_HDA_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_HDA_H
+
+#include <linux/tracepoint.h>
+
+struct hda_bus;
+struct hda_codec;
+
+DECLARE_EVENT_CLASS(hda_cmd,
+
+ TP_PROTO(struct hda_codec *codec, unsigned int val),
+
+ TP_ARGS(codec, val),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, card )
+ __field( unsigned int, addr )
+ __field( unsigned int, val )
+ ),
+
+ TP_fast_assign(
+ __entry->card = (codec)->bus->card->number;
+ __entry->addr = (codec)->addr;
+ __entry->val = (val);
+ ),
+
+ TP_printk("[%d:%d] val=%x", __entry->card, __entry->addr, __entry->val)
+);
+
+DEFINE_EVENT(hda_cmd, hda_send_cmd,
+ TP_PROTO(struct hda_codec *codec, unsigned int val),
+ TP_ARGS(codec, val)
+);
+
+DEFINE_EVENT(hda_cmd, hda_get_response,
+ TP_PROTO(struct hda_codec *codec, unsigned int val),
+ TP_ARGS(codec, val)
+);
+
+TRACE_EVENT(hda_bus_reset,
+
+ TP_PROTO(struct hda_bus *bus),
+
+ TP_ARGS(bus),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, card )
+ ),
+
+ TP_fast_assign(
+ __entry->card = (bus)->card->number;
+ ),
+
+ TP_printk("[%d]", __entry->card)
+);
+
+DECLARE_EVENT_CLASS(hda_power,
+
+ TP_PROTO(struct hda_codec *codec),
+
+ TP_ARGS(codec),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, card )
+ __field( unsigned int, addr )
+ ),
+
+ TP_fast_assign(
+ __entry->card = (codec)->bus->card->number;
+ __entry->addr = (codec)->addr;
+ ),
+
+ TP_printk("[%d:%d]", __entry->card, __entry->addr)
+);
+
+DEFINE_EVENT(hda_power, hda_power_down,
+ TP_PROTO(struct hda_codec *codec),
+ TP_ARGS(codec)
+);
+
+DEFINE_EVENT(hda_power, hda_power_up,
+ TP_PROTO(struct hda_codec *codec),
+ TP_ARGS(codec)
+);
+
+TRACE_EVENT(hda_unsol_event,
+
+ TP_PROTO(struct hda_bus *bus, u32 res, u32 res_ex),
+
+ TP_ARGS(bus, res, res_ex),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, card )
+ __field( u32, res )
+ __field( u32, res_ex )
+ ),
+
+ TP_fast_assign(
+ __entry->card = (bus)->card->number;
+ __entry->res = res;
+ __entry->res_ex = res_ex;
+ ),
+
+ TP_printk("[%d] res=%x, res_ex=%x", __entry->card,
+ __entry->res, __entry->res_ex)
+);
+
+#endif /* _TRACE_HDA_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 8648917..d8aac58 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -48,6 +48,8 @@
const hda_nid_t *alt_dac_nid;
const struct hda_pcm_stream *stream_analog_alt_playback;
+ int independent_hp;
+ int num_active_streams;
/* capture */
unsigned int num_adc_nids;
@@ -302,6 +304,72 @@
}
#endif
+static void activate_ctl(struct hda_codec *codec, const char *name, int active)
+{
+ struct snd_kcontrol *ctl = snd_hda_find_mixer_ctl(codec, name);
+ if (ctl) {
+ ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+ ctl->vd[0].access |= active ? 0 :
+ SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+ ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_WRITE;
+ ctl->vd[0].access |= active ?
+ SNDRV_CTL_ELEM_ACCESS_WRITE : 0;
+ snd_ctl_notify(codec->bus->card,
+ SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
+ }
+}
+
+static void set_stream_active(struct hda_codec *codec, bool active)
+{
+ struct ad198x_spec *spec = codec->spec;
+ if (active)
+ spec->num_active_streams++;
+ else
+ spec->num_active_streams--;
+ activate_ctl(codec, "Independent HP", spec->num_active_streams == 0);
+}
+
+static int ad1988_independent_hp_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char * const texts[] = { "OFF", "ON", NULL};
+ int index;
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ index = uinfo->value.enumerated.item;
+ if (index >= 2)
+ index = 1;
+ strcpy(uinfo->value.enumerated.name, texts[index]);
+ return 0;
+}
+
+static int ad1988_independent_hp_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct ad198x_spec *spec = codec->spec;
+ ucontrol->value.enumerated.item[0] = spec->independent_hp;
+ return 0;
+}
+
+static int ad1988_independent_hp_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct ad198x_spec *spec = codec->spec;
+ unsigned int select = ucontrol->value.enumerated.item[0];
+ if (spec->independent_hp != select) {
+ spec->independent_hp = select;
+ if (spec->independent_hp)
+ spec->multiout.hp_nid = 0;
+ else
+ spec->multiout.hp_nid = spec->alt_dac_nid[0];
+ return 1;
+ }
+ return 0;
+}
+
/*
* Analog playback callbacks
*/
@@ -310,8 +378,15 @@
struct snd_pcm_substream *substream)
{
struct ad198x_spec *spec = codec->spec;
- return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
+ int err;
+ set_stream_active(codec, true);
+ err = snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
hinfo);
+ if (err < 0) {
+ set_stream_active(codec, false);
+ return err;
+ }
+ return 0;
}
static int ad198x_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
@@ -333,11 +408,41 @@
return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
}
+static int ad198x_playback_pcm_close(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ set_stream_active(codec, false);
+ return 0;
+}
+
+static int ad1988_alt_playback_pcm_open(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct ad198x_spec *spec = codec->spec;
+ if (!spec->independent_hp)
+ return -EBUSY;
+ set_stream_active(codec, true);
+ return 0;
+}
+
+static int ad1988_alt_playback_pcm_close(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ set_stream_active(codec, false);
+ return 0;
+}
+
static const struct hda_pcm_stream ad198x_pcm_analog_alt_playback = {
.substreams = 1,
.channels_min = 2,
.channels_max = 2,
- /* NID is set in ad198x_build_pcms */
+ .ops = {
+ .open = ad1988_alt_playback_pcm_open,
+ .close = ad1988_alt_playback_pcm_close
+ },
};
/*
@@ -402,7 +507,6 @@
return 0;
}
-
/*
*/
static const struct hda_pcm_stream ad198x_pcm_analog_playback = {
@@ -413,7 +517,8 @@
.ops = {
.open = ad198x_playback_pcm_open,
.prepare = ad198x_playback_pcm_prepare,
- .cleanup = ad198x_playback_pcm_cleanup
+ .cleanup = ad198x_playback_pcm_cleanup,
+ .close = ad198x_playback_pcm_close
},
};
@@ -2058,7 +2163,6 @@
enum {
AD1988_6STACK,
AD1988_6STACK_DIG,
- AD1988_6STACK_DIG_FP,
AD1988_3STACK,
AD1988_3STACK_DIG,
AD1988_LAPTOP,
@@ -2168,6 +2272,17 @@
return err;
}
+static const struct snd_kcontrol_new ad1988_hp_mixers[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Independent HP",
+ .info = ad1988_independent_hp_info,
+ .get = ad1988_independent_hp_get,
+ .put = ad1988_independent_hp_put,
+ },
+ { } /* end */
+};
+
/* 6-stack mode */
static const struct snd_kcontrol_new ad1988_6stack_mixers1[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x04, 0x0, HDA_OUTPUT),
@@ -2188,6 +2303,7 @@
};
static const struct snd_kcontrol_new ad1988_6stack_mixers2[] = {
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x29, 2, HDA_INPUT),
HDA_BIND_MUTE("Surround Playback Switch", 0x2a, 2, HDA_INPUT),
HDA_BIND_MUTE_MONO("Center Playback Switch", 0x27, 1, 2, HDA_INPUT),
@@ -2210,13 +2326,6 @@
HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x39, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Mic Boost Volume", 0x3c, 0x0, HDA_OUTPUT),
-
- { } /* end */
-};
-
-static const struct snd_kcontrol_new ad1988_6stack_fp_mixers[] = {
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-
{ } /* end */
};
@@ -2238,6 +2347,7 @@
};
static const struct snd_kcontrol_new ad1988_3stack_mixers2[] = {
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x29, 2, HDA_INPUT),
HDA_BIND_MUTE("Surround Playback Switch", 0x2c, 2, HDA_INPUT),
HDA_BIND_MUTE_MONO("Center Playback Switch", 0x26, 1, 2, HDA_INPUT),
@@ -2272,6 +2382,7 @@
/* laptop mode */
static const struct snd_kcontrol_new ad1988_laptop_mixers[] = {
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x04, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x29, 0x0, HDA_INPUT),
HDA_BIND_MUTE("Mono Playback Switch", 0x1e, 2, HDA_INPUT),
@@ -2446,7 +2557,7 @@
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Port-A front headphon path */
- {0x37, AC_VERB_SET_CONNECT_SEL, 0x01}, /* DAC1:04h */
+ {0x37, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC0:03h */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -2594,7 +2705,7 @@
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Port-A front headphon path */
- {0x37, AC_VERB_SET_CONNECT_SEL, 0x01}, /* DAC1:04h */
+ {0x37, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC0:03h */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -2669,7 +2780,7 @@
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Port-A front headphon path */
- {0x37, AC_VERB_SET_CONNECT_SEL, 0x01}, /* DAC1:04h */
+ {0x37, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC0:03h */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -2782,11 +2893,11 @@
{
static const hda_nid_t idx_to_dac[8] = {
/* A B C D E F G H */
- 0x04, 0x06, 0x05, 0x04, 0x0a, 0x06, 0x05, 0x0a
+ 0x03, 0x06, 0x05, 0x04, 0x0a, 0x06, 0x05, 0x0a
};
static const hda_nid_t idx_to_dac_rev2[8] = {
/* A B C D E F G H */
- 0x04, 0x05, 0x0a, 0x04, 0x06, 0x05, 0x0a, 0x06
+ 0x03, 0x05, 0x0a, 0x04, 0x06, 0x05, 0x0a, 0x06
};
if (is_rev2(codec))
return idx_to_dac_rev2[idx];
@@ -3023,8 +3134,8 @@
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
switch (nid) {
- case 0x11: /* port-A - DAC 04 */
- snd_hda_codec_write(codec, 0x37, 0, AC_VERB_SET_CONNECT_SEL, 0x01);
+ case 0x11: /* port-A - DAC 03 */
+ snd_hda_codec_write(codec, 0x37, 0, AC_VERB_SET_CONNECT_SEL, 0x00);
break;
case 0x14: /* port-B - DAC 06 */
snd_hda_codec_write(codec, 0x30, 0, AC_VERB_SET_CONNECT_SEL, 0x02);
@@ -3150,7 +3261,6 @@
static const char * const ad1988_models[AD1988_MODEL_LAST] = {
[AD1988_6STACK] = "6stack",
[AD1988_6STACK_DIG] = "6stack-dig",
- [AD1988_6STACK_DIG_FP] = "6stack-dig-fp",
[AD1988_3STACK] = "3stack",
[AD1988_3STACK_DIG] = "3stack-dig",
[AD1988_LAPTOP] = "laptop",
@@ -3208,10 +3318,11 @@
}
set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+ if (!spec->multiout.hp_nid)
+ spec->multiout.hp_nid = ad1988_alt_dac_nid[0];
switch (board_config) {
case AD1988_6STACK:
case AD1988_6STACK_DIG:
- case AD1988_6STACK_DIG_FP:
spec->multiout.max_channels = 8;
spec->multiout.num_dacs = 4;
if (is_rev2(codec))
@@ -3227,19 +3338,7 @@
spec->mixers[1] = ad1988_6stack_mixers2;
spec->num_init_verbs = 1;
spec->init_verbs[0] = ad1988_6stack_init_verbs;
- if (board_config == AD1988_6STACK_DIG_FP) {
- spec->num_mixers++;
- spec->mixers[2] = ad1988_6stack_fp_mixers;
- spec->num_init_verbs++;
- spec->init_verbs[1] = ad1988_6stack_fp_init_verbs;
- spec->slave_vols = ad1988_6stack_fp_slave_vols;
- spec->slave_sws = ad1988_6stack_fp_slave_sws;
- spec->alt_dac_nid = ad1988_alt_dac_nid;
- spec->stream_analog_alt_playback =
- &ad198x_pcm_analog_alt_playback;
- }
- if ((board_config == AD1988_6STACK_DIG) ||
- (board_config == AD1988_6STACK_DIG_FP)) {
+ if (board_config == AD1988_6STACK_DIG) {
spec->multiout.dig_out_nid = AD1988_SPDIF_OUT;
spec->dig_in_nid = AD1988_SPDIF_IN;
}
@@ -3282,6 +3381,15 @@
break;
}
+ if (spec->autocfg.hp_pins[0]) {
+ spec->mixers[spec->num_mixers++] = ad1988_hp_mixers;
+ spec->slave_vols = ad1988_6stack_fp_slave_vols;
+ spec->slave_sws = ad1988_6stack_fp_slave_sws;
+ spec->alt_dac_nid = ad1988_alt_dac_nid;
+ spec->stream_analog_alt_playback =
+ &ad198x_pcm_analog_alt_playback;
+ }
+
spec->num_adc_nids = ARRAY_SIZE(ad1988_adc_nids);
spec->adc_nids = ad1988_adc_nids;
spec->capsrc_nids = ad1988_capsrc_nids;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 76752d8e..0c8b5a1 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -136,6 +136,8 @@
unsigned int thinkpad:1;
unsigned int hp_laptop:1;
unsigned int asus:1;
+ unsigned int pin_eapd_ctrls:1;
+ unsigned int single_adc_amp:1;
unsigned int adc_switching:1;
@@ -1867,39 +1869,6 @@
{ } /* end */
};
-static const struct hda_verb cxt5051_lenovo_x200_init_verbs[] = {
- /* Line in, Mic */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
- /* SPK */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* HP, Amp */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x16, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Docking HP */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x19, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* DAC1 */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Record selector: Internal mic */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x44},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1) | 0x44},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x44},
- /* SPDIF route: PCM */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* needed for W500 Advanced Mini Dock 250410 */
- {0x1c, AC_VERB_SET_CONNECT_SEL, 0x0},
- /* EAPD */
- {0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
- {0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
- {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
- { } /* end */
-};
-
static const struct hda_verb cxt5051_f700_init_verbs[] = {
/* Line in, Mic */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
@@ -1968,7 +1937,6 @@
CXT5051_LAPTOP, /* Laptops w/ EAPD support */
CXT5051_HP, /* no docking */
CXT5051_HP_DV6736, /* HP without mic switch */
- CXT5051_LENOVO_X200, /* Lenovo X200 laptop, also used for Advanced Mini Dock 250410 */
CXT5051_F700, /* HP Compaq Presario F700 */
CXT5051_TOSHIBA, /* Toshiba M300 & co */
CXT5051_IDEAPAD, /* Lenovo IdeaPad Y430 */
@@ -1980,7 +1948,6 @@
[CXT5051_LAPTOP] = "laptop",
[CXT5051_HP] = "hp",
[CXT5051_HP_DV6736] = "hp-dv6736",
- [CXT5051_LENOVO_X200] = "lenovo-x200",
[CXT5051_F700] = "hp-700",
[CXT5051_TOSHIBA] = "toshiba",
[CXT5051_IDEAPAD] = "ideapad",
@@ -1995,7 +1962,6 @@
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5051_LAPTOP),
SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
- SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT5051_LENOVO_X200),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo IdeaPad", CXT5051_IDEAPAD),
{}
};
@@ -2053,13 +2019,6 @@
spec->mixers[0] = cxt5051_hp_dv6736_mixers;
spec->auto_mic = 0;
break;
- case CXT5051_LENOVO_X200:
- spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs;
- /* Thinkpad X301 does not have S/PDIF wired and no ability
- to use a docking station. */
- if (codec->subsystem_id == 0x17aa211f)
- spec->multiout.dig_out_nid = 0;
- break;
case CXT5051_F700:
spec->init_verbs[0] = cxt5051_f700_init_verbs;
spec->mixers[0] = cxt5051_f700_mixers;
@@ -3473,12 +3432,14 @@
static void do_automute(struct hda_codec *codec, int num_pins,
hda_nid_t *pins, bool on)
{
+ struct conexant_spec *spec = codec->spec;
int i;
for (i = 0; i < num_pins; i++)
snd_hda_codec_write(codec, pins[i], 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
on ? PIN_OUT : 0);
- cx_auto_turn_eapd(codec, num_pins, pins, on);
+ if (spec->pin_eapd_ctrls)
+ cx_auto_turn_eapd(codec, num_pins, pins, on);
}
static int detect_jacks(struct hda_codec *codec, int num_pins, hda_nid_t *pins)
@@ -3503,9 +3464,12 @@
int on = 1;
/* turn on HP EAPD when HP jacks are present */
- if (spec->auto_mute)
- on = spec->hp_present;
- cx_auto_turn_eapd(codec, cfg->hp_outs, cfg->hp_pins, on);
+ if (spec->pin_eapd_ctrls) {
+ if (spec->auto_mute)
+ on = spec->hp_present;
+ cx_auto_turn_eapd(codec, cfg->hp_outs, cfg->hp_pins, on);
+ }
+
/* mute speakers in auto-mode if HP or LO jacks are plugged */
if (spec->auto_mute)
on = !(spec->hp_present ||
@@ -3932,20 +3896,10 @@
#define cx_auto_parse_beep(codec)
#endif
-static bool found_in_nid_list(hda_nid_t nid, const hda_nid_t *list, int nums)
-{
- int i;
- for (i = 0; i < nums; i++)
- if (list[i] == nid)
- return true;
- return false;
-}
-
-/* parse extra-EAPD that aren't assigned to any pins */
+/* parse EAPDs */
static void cx_auto_parse_eapd(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
- struct auto_pin_cfg *cfg = &spec->autocfg;
hda_nid_t nid, end_nid;
end_nid = codec->start_nid + codec->num_nodes;
@@ -3954,14 +3908,18 @@
continue;
if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD))
continue;
- if (found_in_nid_list(nid, cfg->line_out_pins, cfg->line_outs) ||
- found_in_nid_list(nid, cfg->hp_pins, cfg->hp_outs) ||
- found_in_nid_list(nid, cfg->speaker_pins, cfg->speaker_outs))
- continue;
spec->eapds[spec->num_eapds++] = nid;
if (spec->num_eapds >= ARRAY_SIZE(spec->eapds))
break;
}
+
+ /* NOTE: below is a wild guess; if we have more than two EAPDs,
+ * it's a new chip, where EAPDs are supposed to be associated to
+ * pins, and we can control EAPD per pin.
+ * OTOH, if only one or two EAPDs are found, it's an old chip,
+ * thus it might control over all pins.
+ */
+ spec->pin_eapd_ctrls = spec->num_eapds > 2;
}
static int cx_auto_parse_auto_config(struct hda_codec *codec)
@@ -4067,8 +4025,9 @@
}
}
cx_auto_update_speakers(codec);
- /* turn on/off extra EAPDs, too */
- cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true);
+ /* turn on all EAPDs if no individual EAPD control is available */
+ if (!spec->pin_eapd_ctrls)
+ cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true);
}
static void cx_auto_init_input(struct hda_codec *codec)
@@ -4255,6 +4214,8 @@
int idx = get_input_connection(codec, adc_nid, nid);
if (idx < 0)
continue;
+ if (spec->single_adc_amp)
+ idx = 0;
return cx_auto_add_volume_idx(codec, label, pfx,
cidx, adc_nid, HDA_INPUT, idx);
}
@@ -4295,14 +4256,21 @@
struct hda_input_mux *imux = &spec->private_imux;
const char *prev_label;
int input_conn[HDA_MAX_NUM_INPUTS];
- int i, err, cidx;
+ int i, j, err, cidx;
int multi_connection;
+ if (!imux->num_items)
+ return 0;
+
multi_connection = 0;
for (i = 0; i < imux->num_items; i++) {
cidx = get_input_connection(codec, spec->imux_info[i].adc,
spec->imux_info[i].pin);
- input_conn[i] = (spec->imux_info[i].adc << 8) | cidx;
+ if (cidx < 0)
+ continue;
+ input_conn[i] = spec->imux_info[i].adc;
+ if (!spec->single_adc_amp)
+ input_conn[i] |= cidx << 8;
if (i > 0 && input_conn[i] != input_conn[0])
multi_connection = 1;
}
@@ -4331,6 +4299,15 @@
err = cx_auto_add_capture_volume(codec, nid,
"Capture", "", cidx);
} else {
+ bool dup_found = false;
+ for (j = 0; j < i; j++) {
+ if (input_conn[j] == input_conn[i]) {
+ dup_found = true;
+ break;
+ }
+ }
+ if (dup_found)
+ continue;
err = cx_auto_add_capture_volume(codec, nid,
label, " Capture", cidx);
}
@@ -4394,6 +4371,53 @@
.reboot_notify = snd_hda_shutup_pins,
};
+/*
+ * pin fix-up
+ */
+struct cxt_pincfg {
+ hda_nid_t nid;
+ u32 val;
+};
+
+static void apply_pincfg(struct hda_codec *codec, const struct cxt_pincfg *cfg)
+{
+ for (; cfg->nid; cfg++)
+ snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+
+}
+
+static void apply_pin_fixup(struct hda_codec *codec,
+ const struct snd_pci_quirk *quirk,
+ const struct cxt_pincfg **table)
+{
+ quirk = snd_pci_quirk_lookup(codec->bus->pci, quirk);
+ if (quirk) {
+ snd_printdd(KERN_INFO "hda_codec: applying pincfg for %s\n",
+ quirk->name);
+ apply_pincfg(codec, table[quirk->value]);
+ }
+}
+
+enum {
+ CXT_PINCFG_LENOVO_X200,
+};
+
+static const struct cxt_pincfg cxt_pincfg_lenovo_x200[] = {
+ { 0x16, 0x042140ff }, /* HP (seq# overridden) */
+ { 0x17, 0x21a11000 }, /* dock-mic */
+ { 0x19, 0x2121103f }, /* dock-HP */
+ {}
+};
+
+static const struct cxt_pincfg *cxt_pincfg_tbl[] = {
+ [CXT_PINCFG_LENOVO_X200] = cxt_pincfg_lenovo_x200,
+};
+
+static const struct snd_pci_quirk cxt_fixups[] = {
+ SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT_PINCFG_LENOVO_X200),
+ {}
+};
+
static int patch_conexant_auto(struct hda_codec *codec)
{
struct conexant_spec *spec;
@@ -4407,6 +4431,15 @@
return -ENOMEM;
codec->spec = spec;
codec->pin_amp_workaround = 1;
+
+ switch (codec->vendor_id) {
+ case 0x14f15045:
+ spec->single_adc_amp = 1;
+ break;
+ }
+
+ apply_pin_fixup(codec, cxt_fixups, cxt_pincfg_tbl);
+
err = cx_auto_search_adcs(codec);
if (err < 0)
return err;
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 19cb72d..3425401 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -324,6 +324,66 @@
return -EINVAL;
}
+static int hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct hdmi_spec *spec;
+ int pin_idx;
+
+ spec = codec->spec;
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+
+ pin_idx = kcontrol->private_value;
+ uinfo->count = spec->pins[pin_idx].sink_eld.eld_size;
+
+ return 0;
+}
+
+static int hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct hdmi_spec *spec;
+ int pin_idx;
+
+ spec = codec->spec;
+ pin_idx = kcontrol->private_value;
+
+ memcpy(ucontrol->value.bytes.data,
+ spec->pins[pin_idx].sink_eld.eld_buffer, ELD_MAX_SIZE);
+
+ return 0;
+}
+
+static struct snd_kcontrol_new eld_bytes_ctl = {
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "ELD",
+ .info = hdmi_eld_ctl_info,
+ .get = hdmi_eld_ctl_get,
+};
+
+static int hdmi_create_eld_ctl(struct hda_codec *codec, int pin_idx,
+ int device)
+{
+ struct snd_kcontrol *kctl;
+ struct hdmi_spec *spec = codec->spec;
+ int err;
+
+ kctl = snd_ctl_new1(&eld_bytes_ctl, codec);
+ if (!kctl)
+ return -ENOMEM;
+ kctl->private_value = pin_idx;
+ kctl->id.device = device;
+
+ err = snd_hda_ctl_add(codec, spec->pins[pin_idx].pin_nid, kctl);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
#ifdef BE_PARANOID
static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
int *packet_index, int *byte_index)
@@ -967,19 +1027,12 @@
per_pin->pin_nid = pin_nid;
- err = snd_hda_input_jack_add(codec, pin_nid,
- SND_JACK_VIDEOOUT, NULL);
- if (err < 0)
- return err;
-
err = hdmi_read_pin_conn(codec, pin_idx);
if (err < 0)
return err;
spec->num_pins++;
- hdmi_present_sense(codec, pin_nid, eld);
-
return 0;
}
@@ -1162,6 +1215,25 @@
return 0;
}
+static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx)
+{
+ int err;
+ char hdmi_str[32];
+ struct hdmi_spec *spec = codec->spec;
+ struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
+ int pcmdev = spec->pcm_rec[pin_idx].device;
+
+ snprintf(hdmi_str, sizeof(hdmi_str), "HDMI/DP,pcm=%d", pcmdev);
+
+ err = snd_hda_input_jack_add(codec, per_pin->pin_nid,
+ SND_JACK_VIDEOOUT, pcmdev > 0 ? hdmi_str : NULL);
+ if (err < 0)
+ return err;
+
+ hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld);
+ return 0;
+}
+
static int generic_hdmi_build_controls(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
@@ -1170,12 +1242,25 @@
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
+
+ err = generic_hdmi_build_jack(codec, pin_idx);
+ if (err < 0)
+ return err;
+
err = snd_hda_create_spdif_out_ctls(codec,
per_pin->pin_nid,
per_pin->mux_nids[0]);
if (err < 0)
return err;
snd_hda_spdif_ctls_unassign(codec, pin_idx);
+
+ /* add control for ELD Bytes */
+ err = hdmi_create_eld_ctl(codec,
+ pin_idx,
+ spec->pcm_rec[pin_idx].device);
+
+ if (err < 0)
+ return err;
}
return 0;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7a73621..8f93b97 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -116,6 +116,8 @@
const hda_nid_t *capsrc_nids;
hda_nid_t dig_in_nid; /* digital-in NID; optional */
hda_nid_t mixer_nid; /* analog-mixer NID */
+ DECLARE_BITMAP(vol_ctls, 0x20 << 1);
+ DECLARE_BITMAP(sw_ctls, 0x20 << 1);
/* capture setup for dynamic dual-adc switch */
hda_nid_t cur_adc;
@@ -159,23 +161,27 @@
void (*power_hook)(struct hda_codec *codec);
#endif
void (*shutup)(struct hda_codec *codec);
+ void (*automute_hook)(struct hda_codec *codec);
/* for pin sensing */
- unsigned int jack_present: 1;
+ unsigned int hp_jack_present:1;
unsigned int line_jack_present:1;
unsigned int master_mute:1;
unsigned int auto_mic:1;
unsigned int auto_mic_valid_imux:1; /* valid imux for auto-mic */
- unsigned int automute:1; /* HP automute enabled */
- unsigned int detect_line:1; /* Line-out detection enabled */
- unsigned int automute_lines:1; /* automute line-out as well; NOP when automute_hp_lo isn't set */
- unsigned int automute_hp_lo:1; /* both HP and LO available */
+ unsigned int automute_speaker:1; /* automute speaker outputs */
+ unsigned int automute_lo:1; /* automute LO outputs */
+ unsigned int detect_hp:1; /* Headphone detection enabled */
+ unsigned int detect_lo:1; /* Line-out detection enabled */
+ unsigned int automute_speaker_possible:1; /* there are speakers and either LO or HP */
+ unsigned int automute_lo_possible:1; /* there are line outs and HP */
/* other flags */
unsigned int no_analog :1; /* digital I/O only */
unsigned int dyn_adc_switch:1; /* switch ADCs (for ALC275) */
unsigned int single_input_src:1;
unsigned int vol_in_capsrc:1; /* use capsrc volume (ADC has no vol) */
+ unsigned int parse_flags; /* passed to snd_hda_parse_pin_defcfg() */
/* auto-mute control */
int automute_mode;
@@ -193,6 +199,7 @@
/* for PLL fix */
hda_nid_t pll_nid;
unsigned int pll_coef_idx, pll_coef_bit;
+ unsigned int coef0;
/* fix-up list */
int fixup_id;
@@ -202,6 +209,9 @@
/* multi-io */
int multi_ios;
struct alc_multi_io multi_io[4];
+
+ /* bind volumes */
+ struct snd_array bind_ctls;
};
#define ALC_MODEL_AUTO 0 /* common for all chips */
@@ -525,8 +535,8 @@
}
}
-/* Toggle internal speakers muting */
-static void update_speakers(struct hda_codec *codec)
+/* Toggle outputs muting */
+static void update_outputs(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int on;
@@ -538,10 +548,10 @@
do_automute(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
spec->autocfg.hp_pins, spec->master_mute, true);
- if (!spec->automute)
+ if (!spec->automute_speaker)
on = 0;
else
- on = spec->jack_present | spec->line_jack_present;
+ on = spec->hp_jack_present | spec->line_jack_present;
on |= spec->master_mute;
do_automute(codec, ARRAY_SIZE(spec->autocfg.speaker_pins),
spec->autocfg.speaker_pins, on, false);
@@ -551,26 +561,35 @@
if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0] ||
spec->autocfg.line_out_pins[0] == spec->autocfg.speaker_pins[0])
return;
- if (!spec->automute || (spec->automute_hp_lo && !spec->automute_lines))
+ if (!spec->automute_lo)
on = 0;
else
- on = spec->jack_present;
+ on = spec->hp_jack_present;
on |= spec->master_mute;
do_automute(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
spec->autocfg.line_out_pins, on, false);
}
+static void call_update_outputs(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ if (spec->automute_hook)
+ spec->automute_hook(codec);
+ else
+ update_outputs(codec);
+}
+
/* standard HP-automute helper */
static void alc_hp_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- spec->jack_present =
+ spec->hp_jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
spec->autocfg.hp_pins);
- if (!spec->automute)
+ if (!spec->detect_hp || (!spec->automute_speaker && !spec->automute_lo))
return;
- update_speakers(codec);
+ call_update_outputs(codec);
}
/* standard line-out-automute helper */
@@ -585,9 +604,9 @@
spec->line_jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
spec->autocfg.line_out_pins);
- if (!spec->automute || !spec->detect_line)
+ if (!spec->automute_speaker || !spec->detect_lo)
return;
- update_speakers(codec);
+ call_update_outputs(codec);
}
#define get_connection_index(codec, mux, nid) \
@@ -785,7 +804,7 @@
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
- if (spec->automute_hp_lo) {
+ if (spec->automute_speaker_possible && spec->automute_lo_possible) {
uinfo->value.enumerated.items = 3;
texts = texts3;
} else {
@@ -804,13 +823,12 @@
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
- unsigned int val;
- if (!spec->automute)
- val = 0;
- else if (!spec->automute_hp_lo || !spec->automute_lines)
- val = 1;
- else
- val = 2;
+ unsigned int val = 0;
+ if (spec->automute_speaker)
+ val++;
+ if (spec->automute_lo)
+ val++;
+
ucontrol->value.enumerated.item[0] = val;
return 0;
}
@@ -823,29 +841,36 @@
switch (ucontrol->value.enumerated.item[0]) {
case 0:
- if (!spec->automute)
+ if (!spec->automute_speaker && !spec->automute_lo)
return 0;
- spec->automute = 0;
+ spec->automute_speaker = 0;
+ spec->automute_lo = 0;
break;
case 1:
- if (spec->automute &&
- (!spec->automute_hp_lo || !spec->automute_lines))
- return 0;
- spec->automute = 1;
- spec->automute_lines = 0;
+ if (spec->automute_speaker_possible) {
+ if (!spec->automute_lo && spec->automute_speaker)
+ return 0;
+ spec->automute_speaker = 1;
+ spec->automute_lo = 0;
+ } else if (spec->automute_lo_possible) {
+ if (spec->automute_lo)
+ return 0;
+ spec->automute_lo = 1;
+ } else
+ return -EINVAL;
break;
case 2:
- if (!spec->automute_hp_lo)
+ if (!spec->automute_lo_possible || !spec->automute_speaker_possible)
return -EINVAL;
- if (spec->automute && spec->automute_lines)
+ if (spec->automute_speaker && spec->automute_lo)
return 0;
- spec->automute = 1;
- spec->automute_lines = 1;
+ spec->automute_speaker = 1;
+ spec->automute_lo = 1;
break;
default:
return -EINVAL;
}
- update_speakers(codec);
+ call_update_outputs(codec);
return 1;
}
@@ -882,7 +907,7 @@
* Check the availability of HP/line-out auto-mute;
* Set up appropriately if really supported
*/
-static void alc_init_auto_hp(struct hda_codec *codec)
+static void alc_init_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
@@ -897,8 +922,6 @@
present++;
if (present < 2) /* need two different output types */
return;
- if (present == 3)
- spec->automute_hp_lo = 1; /* both HP and LO automute */
if (!cfg->speaker_pins[0] &&
cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
@@ -914,6 +937,8 @@
cfg->hp_outs = cfg->line_outs;
}
+ spec->automute_mode = ALC_AUTOMUTE_PIN;
+
for (i = 0; i < cfg->hp_outs; i++) {
hda_nid_t nid = cfg->hp_pins[i];
if (!is_jack_detectable(codec, nid))
@@ -923,28 +948,32 @@
snd_hda_codec_write_cache(codec, nid, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | ALC_HP_EVENT);
- spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_PIN;
- }
- if (spec->automute && cfg->line_out_pins[0] &&
- cfg->speaker_pins[0] &&
- cfg->line_out_pins[0] != cfg->hp_pins[0] &&
- cfg->line_out_pins[0] != cfg->speaker_pins[0]) {
- for (i = 0; i < cfg->line_outs; i++) {
- hda_nid_t nid = cfg->line_out_pins[i];
- if (!is_jack_detectable(codec, nid))
- continue;
- snd_printdd("realtek: Enable Line-Out auto-muting "
- "on NID 0x%x\n", nid);
- snd_hda_codec_write_cache(codec, nid, 0,
- AC_VERB_SET_UNSOLICITED_ENABLE,
- AC_USRSP_EN | ALC_FRONT_EVENT);
- spec->detect_line = 1;
- }
- spec->automute_lines = spec->detect_line;
+ spec->detect_hp = 1;
}
- if (spec->automute) {
+ if (cfg->line_out_type == AUTO_PIN_LINE_OUT && cfg->line_outs) {
+ if (cfg->speaker_outs)
+ for (i = 0; i < cfg->line_outs; i++) {
+ hda_nid_t nid = cfg->line_out_pins[i];
+ if (!is_jack_detectable(codec, nid))
+ continue;
+ snd_printdd("realtek: Enable Line-Out "
+ "auto-muting on NID 0x%x\n", nid);
+ snd_hda_codec_write_cache(codec, nid, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | ALC_FRONT_EVENT);
+ spec->detect_lo = 1;
+ }
+ spec->automute_lo_possible = spec->detect_hp;
+ }
+
+ spec->automute_speaker_possible = cfg->speaker_outs &&
+ (spec->detect_hp || spec->detect_lo);
+
+ spec->automute_lo = spec->automute_lo_possible;
+ spec->automute_speaker = spec->automute_speaker_possible;
+
+ if (spec->automute_speaker_possible || spec->automute_lo_possible) {
/* create a control for automute mode */
alc_add_automute_mode_enum(codec);
spec->unsol_event = alc_sku_unsol_event;
@@ -1145,7 +1174,7 @@
/* check the availabilities of auto-mute and auto-mic switches */
static void alc_auto_check_switches(struct hda_codec *codec)
{
- alc_init_auto_hp(codec);
+ alc_init_automute(codec);
alc_init_auto_mic(codec);
}
@@ -1528,6 +1557,15 @@
coef_val);
}
+/* a special bypass for COEF 0; read the cached value at the second time */
+static unsigned int alc_get_coef0(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ if (!spec->coef0)
+ spec->coef0 = alc_read_coef_idx(codec, 0);
+ return spec->coef0;
+}
+
/*
* Digital I/O handling
*/
@@ -2368,6 +2406,18 @@
snd_array_free(&spec->kctls);
}
+static void alc_free_bind_ctls(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ if (spec->bind_ctls.list) {
+ struct hda_bind_ctls **ctl = spec->bind_ctls.list;
+ int i;
+ for (i = 0; i < spec->bind_ctls.used; i++)
+ kfree(ctl[i]);
+ }
+ snd_array_free(&spec->bind_ctls);
+}
+
static void alc_free(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -2378,6 +2428,7 @@
alc_shutup(codec);
snd_hda_input_jack_free(codec);
alc_free_kctls(codec);
+ alc_free_bind_ctls(codec);
kfree(spec);
snd_hda_detach_beep_device(codec);
}
@@ -2441,6 +2492,47 @@
}
/*
+ * Rename codecs appropriately from COEF value
+ */
+struct alc_codec_rename_table {
+ unsigned int vendor_id;
+ unsigned short coef_mask;
+ unsigned short coef_bits;
+ const char *name;
+};
+
+static struct alc_codec_rename_table rename_tbl[] = {
+ { 0x10ec0269, 0xfff0, 0x3010, "ALC277" },
+ { 0x10ec0269, 0xf0f0, 0x2010, "ALC259" },
+ { 0x10ec0269, 0xf0f0, 0x3010, "ALC258" },
+ { 0x10ec0269, 0x00f0, 0x0010, "ALC269VB" },
+ { 0x10ec0269, 0xffff, 0xa023, "ALC259" },
+ { 0x10ec0269, 0xffff, 0x6023, "ALC281X" },
+ { 0x10ec0269, 0x00f0, 0x0020, "ALC269VC" },
+ { 0x10ec0887, 0x00f0, 0x0030, "ALC887-VD" },
+ { 0x10ec0888, 0x00f0, 0x0030, "ALC888-VD" },
+ { 0x10ec0888, 0xf0f0, 0x3020, "ALC886" },
+ { 0x10ec0899, 0x2000, 0x2000, "ALC899" },
+ { 0x10ec0892, 0xffff, 0x8020, "ALC661" },
+ { 0x10ec0892, 0xffff, 0x8011, "ALC661" },
+ { 0x10ec0892, 0xffff, 0x4011, "ALC656" },
+ { } /* terminator */
+};
+
+static int alc_codec_rename_from_preset(struct hda_codec *codec)
+{
+ const struct alc_codec_rename_table *p;
+
+ for (p = rename_tbl; p->vendor_id; p++) {
+ if (p->vendor_id != codec->vendor_id)
+ continue;
+ if ((alc_get_coef0(codec) & p->coef_mask) == p->coef_bits)
+ return alc_codec_rename(codec, p->name);
+ }
+ return 0;
+}
+
+/*
* Automatic parse of I/O pins from the BIOS configuration
*/
@@ -2448,11 +2540,15 @@
ALC_CTL_WIDGET_VOL,
ALC_CTL_WIDGET_MUTE,
ALC_CTL_BIND_MUTE,
+ ALC_CTL_BIND_VOL,
+ ALC_CTL_BIND_SW,
};
static const struct snd_kcontrol_new alc_control_templates[] = {
HDA_CODEC_VOLUME(NULL, 0, 0, 0),
HDA_CODEC_MUTE(NULL, 0, 0, 0),
HDA_BIND_MUTE(NULL, 0, 0, 0),
+ HDA_BIND_VOL(NULL, 0),
+ HDA_BIND_SW(NULL, 0),
};
/* add dynamic controls */
@@ -2493,13 +2589,14 @@
#define __add_pb_sw_ctrl(spec, type, pfx, cidx, val) \
add_control_with_pfx(spec, type, pfx, "Playback", "Switch", cidx, val)
+static const char * const channel_name[4] = {
+ "Front", "Surround", "CLFE", "Side"
+};
+
static const char *alc_get_line_out_pfx(struct alc_spec *spec, int ch,
bool can_be_master, int *index)
{
struct auto_pin_cfg *cfg = &spec->autocfg;
- static const char * const chname[4] = {
- "Front", "Surround", NULL /*CLFE*/, "Side"
- };
*index = 0;
if (cfg->line_outs == 1 && !spec->multi_ios &&
@@ -2522,7 +2619,10 @@
return "PCM";
break;
}
- return chname[ch];
+ if (snd_BUG_ON(ch >= ARRAY_SIZE(channel_name)))
+ return "PCM";
+
+ return channel_name[ch];
}
/* create input playback/capture controls for the given pin */
@@ -2786,8 +2886,9 @@
if (found_in_nid_list(nid, spec->multiout.dac_nids,
spec->multiout.num_dacs))
continue;
- if (spec->multiout.hp_nid == nid)
- continue;
+ if (found_in_nid_list(nid, spec->multiout.hp_out_nid,
+ ARRAY_SIZE(spec->multiout.hp_out_nid)))
+ continue;
if (found_in_nid_list(nid, spec->multiout.extra_out_nid,
ARRAY_SIZE(spec->multiout.extra_out_nid)))
continue;
@@ -2804,6 +2905,29 @@
return 0;
}
+static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs,
+ const hda_nid_t *pins, hda_nid_t *dacs)
+{
+ int i;
+
+ if (num_outs && !dacs[0]) {
+ dacs[0] = alc_auto_look_for_dac(codec, pins[0]);
+ if (!dacs[0])
+ return 0;
+ }
+
+ for (i = 1; i < num_outs; i++)
+ dacs[i] = get_dac_if_single(codec, pins[i]);
+ for (i = 1; i < num_outs; i++) {
+ if (!dacs[i])
+ dacs[i] = alc_auto_look_for_dac(codec, pins[i]);
+ }
+ return 0;
+}
+
+static int alc_auto_fill_multi_ios(struct hda_codec *codec,
+ unsigned int location);
+
/* fill in the dac_nids table from the parsed pin configuration */
static int alc_auto_fill_dac_nids(struct hda_codec *codec)
{
@@ -2815,7 +2939,7 @@
again:
/* set num_dacs once to full for alc_auto_look_for_dac() */
spec->multiout.num_dacs = cfg->line_outs;
- spec->multiout.hp_nid = 0;
+ spec->multiout.hp_out_nid[0] = 0;
spec->multiout.extra_out_nid[0] = 0;
memset(spec->private_dac_nids, 0, sizeof(spec->private_dac_nids));
spec->multiout.dac_nids = spec->private_dac_nids;
@@ -2826,7 +2950,7 @@
spec->private_dac_nids[i] =
get_dac_if_single(codec, cfg->line_out_pins[i]);
if (cfg->hp_outs)
- spec->multiout.hp_nid =
+ spec->multiout.hp_out_nid[0] =
get_dac_if_single(codec, cfg->hp_pins[0]);
if (cfg->speaker_outs)
spec->multiout.extra_out_nid[0] =
@@ -2858,24 +2982,58 @@
sizeof(hda_nid_t) * (cfg->line_outs - i - 1));
}
- if (cfg->hp_outs && !spec->multiout.hp_nid)
- spec->multiout.hp_nid =
- alc_auto_look_for_dac(codec, cfg->hp_pins[0]);
- if (cfg->speaker_outs && !spec->multiout.extra_out_nid[0])
- spec->multiout.extra_out_nid[0] =
- alc_auto_look_for_dac(codec, cfg->speaker_pins[0]);
+ if (cfg->line_outs == 1 && cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) {
+ /* try to fill multi-io first */
+ unsigned int location, defcfg;
+ int num_pins;
+
+ defcfg = snd_hda_codec_get_pincfg(codec, cfg->line_out_pins[0]);
+ location = get_defcfg_location(defcfg);
+
+ num_pins = alc_auto_fill_multi_ios(codec, location);
+ if (num_pins > 0) {
+ spec->multi_ios = num_pins;
+ spec->ext_channel_count = 2;
+ spec->multiout.num_dacs = num_pins + 1;
+ }
+ }
+
+ if (cfg->line_out_type != AUTO_PIN_HP_OUT)
+ alc_auto_fill_extra_dacs(codec, cfg->hp_outs, cfg->hp_pins,
+ spec->multiout.hp_out_nid);
+ if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT)
+ alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, cfg->speaker_pins,
+ spec->multiout.extra_out_nid);
return 0;
}
+static inline unsigned int get_ctl_pos(unsigned int data)
+{
+ hda_nid_t nid = get_amp_nid_(data);
+ unsigned int dir = get_amp_direction_(data);
+ return (nid << 1) | dir;
+}
+
+#define is_ctl_used(bits, data) \
+ test_bit(get_ctl_pos(data), bits)
+#define mark_ctl_usage(bits, data) \
+ set_bit(get_ctl_pos(data), bits)
+
static int alc_auto_add_vol_ctl(struct hda_codec *codec,
const char *pfx, int cidx,
hda_nid_t nid, unsigned int chs)
{
+ struct alc_spec *spec = codec->spec;
+ unsigned int val;
if (!nid)
return 0;
+ val = HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT);
+ if (is_ctl_used(spec->vol_ctls, val) && chs != 2) /* exclude LFE */
+ return 0;
+ mark_ctl_usage(spec->vol_ctls, val);
return __add_pb_vol_ctrl(codec->spec, ALC_CTL_WIDGET_VOL, pfx, cidx,
- HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
+ val);
}
#define alc_auto_add_stereo_vol(codec, pfx, cidx, nid) \
@@ -2888,6 +3046,7 @@
const char *pfx, int cidx,
hda_nid_t nid, unsigned int chs)
{
+ struct alc_spec *spec = codec->spec;
int wid_type;
int type;
unsigned long val;
@@ -2904,6 +3063,9 @@
type = ALC_CTL_BIND_MUTE;
val = HDA_COMPOSE_AMP_VAL(nid, chs, 2, HDA_INPUT);
}
+ if (is_ctl_used(spec->sw_ctls, val) && chs != 2) /* exclude LFE */
+ return 0;
+ mark_ctl_usage(spec->sw_ctls, val);
return __add_pb_sw_ctrl(codec->spec, type, pfx, cidx, val);
}
@@ -2964,7 +3126,7 @@
sw = alc_look_for_out_mute_nid(codec, pin, dac);
vol = alc_look_for_out_vol_nid(codec, pin, dac);
name = alc_get_line_out_pfx(spec, i, true, &index);
- if (!name) {
+ if (!name || !strcmp(name, "CLFE")) {
/* Center/LFE */
err = alc_auto_add_vol_ctl(codec, "Center", 0, vol, 1);
if (err < 0)
@@ -2990,23 +3152,24 @@
return 0;
}
-/* add playback controls for speaker and HP outputs */
static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin,
- hda_nid_t dac, const char *pfx)
+ hda_nid_t dac, const char *pfx)
{
struct alc_spec *spec = codec->spec;
hda_nid_t sw, vol;
int err;
- if (!pin)
- return 0;
if (!dac) {
+ unsigned int val;
/* the corresponding DAC is already occupied */
if (!(get_wcaps(codec, pin) & AC_WCAP_OUT_AMP))
return 0; /* no way */
/* create a switch only */
- return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx,
- HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+ val = HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT);
+ if (is_ctl_used(spec->sw_ctls, val))
+ return 0; /* already created */
+ mark_ctl_usage(spec->sw_ctls, val);
+ return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, val);
}
sw = alc_look_for_out_mute_nid(codec, pin, dac);
@@ -3020,20 +3183,112 @@
return 0;
}
+static struct hda_bind_ctls *new_bind_ctl(struct hda_codec *codec,
+ unsigned int nums,
+ struct hda_ctl_ops *ops)
+{
+ struct alc_spec *spec = codec->spec;
+ struct hda_bind_ctls **ctlp, *ctl;
+ snd_array_init(&spec->bind_ctls, sizeof(ctl), 8);
+ ctlp = snd_array_new(&spec->bind_ctls);
+ if (!ctlp)
+ return NULL;
+ ctl = kzalloc(sizeof(*ctl) + sizeof(long) * (nums + 1), GFP_KERNEL);
+ *ctlp = ctl;
+ if (ctl)
+ ctl->ops = ops;
+ return ctl;
+}
+
+/* add playback controls for speaker and HP outputs */
+static int alc_auto_create_extra_outs(struct hda_codec *codec, int num_pins,
+ const hda_nid_t *pins,
+ const hda_nid_t *dacs,
+ const char *pfx)
+{
+ struct alc_spec *spec = codec->spec;
+ struct hda_bind_ctls *ctl;
+ char name[32];
+ int i, n, err;
+
+ if (!num_pins || !pins[0])
+ return 0;
+
+ if (num_pins == 1) {
+ hda_nid_t dac = *dacs;
+ if (!dac)
+ dac = spec->multiout.dac_nids[0];
+ return alc_auto_create_extra_out(codec, *pins, dac, pfx);
+ }
+
+ if (dacs[num_pins - 1]) {
+ /* OK, we have a multi-output system with individual volumes */
+ for (i = 0; i < num_pins; i++) {
+ snprintf(name, sizeof(name), "%s %s",
+ pfx, channel_name[i]);
+ err = alc_auto_create_extra_out(codec, pins[i], dacs[i],
+ name);
+ if (err < 0)
+ return err;
+ }
+ return 0;
+ }
+
+ /* Let's create a bind-controls */
+ ctl = new_bind_ctl(codec, num_pins, &snd_hda_bind_sw);
+ if (!ctl)
+ return -ENOMEM;
+ n = 0;
+ for (i = 0; i < num_pins; i++) {
+ if (get_wcaps(codec, pins[i]) & AC_WCAP_OUT_AMP)
+ ctl->values[n++] =
+ HDA_COMPOSE_AMP_VAL(pins[i], 3, 0, HDA_OUTPUT);
+ }
+ if (n) {
+ snprintf(name, sizeof(name), "%s Playback Switch", pfx);
+ err = add_control(spec, ALC_CTL_BIND_SW, name, 0, (long)ctl);
+ if (err < 0)
+ return err;
+ }
+
+ ctl = new_bind_ctl(codec, num_pins, &snd_hda_bind_vol);
+ if (!ctl)
+ return -ENOMEM;
+ n = 0;
+ for (i = 0; i < num_pins; i++) {
+ hda_nid_t vol;
+ if (!pins[i] || !dacs[i])
+ continue;
+ vol = alc_look_for_out_vol_nid(codec, pins[i], dacs[i]);
+ if (vol)
+ ctl->values[n++] =
+ HDA_COMPOSE_AMP_VAL(vol, 3, 0, HDA_OUTPUT);
+ }
+ if (n) {
+ snprintf(name, sizeof(name), "%s Playback Volume", pfx);
+ err = add_control(spec, ALC_CTL_BIND_VOL, name, 0, (long)ctl);
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
static int alc_auto_create_hp_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- return alc_auto_create_extra_out(codec, spec->autocfg.hp_pins[0],
- spec->multiout.hp_nid,
- "Headphone");
+ return alc_auto_create_extra_outs(codec, spec->autocfg.hp_outs,
+ spec->autocfg.hp_pins,
+ spec->multiout.hp_out_nid,
+ "Headphone");
}
static int alc_auto_create_speaker_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- return alc_auto_create_extra_out(codec, spec->autocfg.speaker_pins[0],
- spec->multiout.extra_out_nid[0],
- "Speaker");
+ return alc_auto_create_extra_outs(codec, spec->autocfg.speaker_outs,
+ spec->autocfg.speaker_pins,
+ spec->multiout.extra_out_nid,
+ "Speaker");
}
static void alc_auto_set_output_and_unmute(struct hda_codec *codec,
@@ -3090,20 +3345,37 @@
static void alc_auto_init_extra_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
+ int i;
hda_nid_t pin, dac;
- pin = spec->autocfg.hp_pins[0];
- if (pin) {
- dac = spec->multiout.hp_nid;
- if (!dac)
- dac = spec->multiout.dac_nids[0];
+ for (i = 0; i < spec->autocfg.hp_outs; i++) {
+ if (spec->autocfg.line_out_type == AUTO_PIN_HP_OUT)
+ break;
+ pin = spec->autocfg.hp_pins[i];
+ if (!pin)
+ break;
+ dac = spec->multiout.hp_out_nid[i];
+ if (!dac) {
+ if (i > 0 && spec->multiout.hp_out_nid[0])
+ dac = spec->multiout.hp_out_nid[0];
+ else
+ dac = spec->multiout.dac_nids[0];
+ }
alc_auto_set_output_and_unmute(codec, pin, PIN_HP, dac);
}
- pin = spec->autocfg.speaker_pins[0];
- if (pin) {
- dac = spec->multiout.extra_out_nid[0];
- if (!dac)
- dac = spec->multiout.dac_nids[0];
+ for (i = 0; i < spec->autocfg.speaker_outs; i++) {
+ if (spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT)
+ break;
+ pin = spec->autocfg.speaker_pins[i];
+ if (!pin)
+ break;
+ dac = spec->multiout.extra_out_nid[i];
+ if (!dac) {
+ if (i > 0 && spec->multiout.extra_out_nid[0])
+ dac = spec->multiout.extra_out_nid[0];
+ else
+ dac = spec->multiout.dac_nids[0];
+ }
alc_auto_set_output_and_unmute(codec, pin, PIN_OUT, dac);
}
}
@@ -3116,6 +3388,7 @@
{
struct alc_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t prime_dac = spec->private_dac_nids[0];
int type, i, num_pins = 0;
for (type = AUTO_PIN_LINE_IN; type >= AUTO_PIN_MIC; type--) {
@@ -3143,8 +3416,13 @@
}
}
spec->multiout.num_dacs = 1;
- if (num_pins < 2)
+ if (num_pins < 2) {
+ /* clear up again */
+ memset(spec->private_dac_nids, 0,
+ sizeof(spec->private_dac_nids));
+ spec->private_dac_nids[0] = prime_dac;
return 0;
+ }
return num_pins;
}
@@ -3230,36 +3508,11 @@
.put = alc_auto_ch_mode_put,
};
-static int alc_auto_add_multi_channel_mode(struct hda_codec *codec,
- int (*fill_dac)(struct hda_codec *))
+static int alc_auto_add_multi_channel_mode(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- struct auto_pin_cfg *cfg = &spec->autocfg;
- unsigned int location, defcfg;
- int num_pins;
- if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT && cfg->hp_outs == 1) {
- /* use HP as primary out */
- cfg->speaker_outs = cfg->line_outs;
- memcpy(cfg->speaker_pins, cfg->line_out_pins,
- sizeof(cfg->speaker_pins));
- cfg->line_outs = cfg->hp_outs;
- memcpy(cfg->line_out_pins, cfg->hp_pins, sizeof(cfg->hp_pins));
- cfg->hp_outs = 0;
- memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins));
- cfg->line_out_type = AUTO_PIN_HP_OUT;
- if (fill_dac)
- fill_dac(codec);
- }
- if (cfg->line_outs != 1 ||
- cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
- return 0;
-
- defcfg = snd_hda_codec_get_pincfg(codec, cfg->line_out_pins[0]);
- location = get_defcfg_location(defcfg);
-
- num_pins = alc_auto_fill_multi_ios(codec, location);
- if (num_pins > 0) {
+ if (spec->multi_ios > 0) {
struct snd_kcontrol_new *knew;
knew = alc_kcontrol_new(spec);
@@ -3269,10 +3522,6 @@
knew->name = kstrdup("Channel Mode", GFP_KERNEL);
if (!knew->name)
return -ENOMEM;
-
- spec->multi_ios = num_pins;
- spec->ext_channel_count = 2;
- spec->multiout.num_dacs = num_pins + 1;
}
return 0;
}
@@ -3555,27 +3804,42 @@
const hda_nid_t *ssid_nids)
{
struct alc_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
int err;
- err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
- ignore_nids);
+ err = snd_hda_parse_pin_defcfg(codec, cfg, ignore_nids,
+ spec->parse_flags);
if (err < 0)
return err;
- if (!spec->autocfg.line_outs) {
- if (spec->autocfg.dig_outs || spec->autocfg.dig_in_pin) {
+ if (!cfg->line_outs) {
+ if (cfg->dig_outs || cfg->dig_in_pin) {
spec->multiout.max_channels = 2;
spec->no_analog = 1;
goto dig_only;
}
return 0; /* can't find valid BIOS pin config */
}
+
+ if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT &&
+ cfg->line_outs <= cfg->hp_outs) {
+ /* use HP as primary out */
+ cfg->speaker_outs = cfg->line_outs;
+ memcpy(cfg->speaker_pins, cfg->line_out_pins,
+ sizeof(cfg->speaker_pins));
+ cfg->line_outs = cfg->hp_outs;
+ memcpy(cfg->line_out_pins, cfg->hp_pins, sizeof(cfg->hp_pins));
+ cfg->hp_outs = 0;
+ memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins));
+ cfg->line_out_type = AUTO_PIN_HP_OUT;
+ }
+
err = alc_auto_fill_dac_nids(codec);
if (err < 0)
return err;
- err = alc_auto_add_multi_channel_mode(codec, alc_auto_fill_dac_nids);
+ err = alc_auto_add_multi_channel_mode(codec);
if (err < 0)
return err;
- err = alc_auto_create_multi_out_ctls(codec, &spec->autocfg);
+ err = alc_auto_create_multi_out_ctls(codec, cfg);
if (err < 0)
return err;
err = alc_auto_create_hp_out(codec);
@@ -3678,10 +3942,8 @@
if (board_config == ALC_MODEL_AUTO) {
/* automatic parse from the BIOS config */
err = alc880_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
else if (!err) {
printk(KERN_INFO
@@ -3706,10 +3968,8 @@
if (!spec->no_analog) {
err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
@@ -3724,6 +3984,10 @@
#endif
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
@@ -3805,10 +4069,8 @@
if (board_config == ALC_MODEL_AUTO) {
/* automatic parse from the BIOS config */
err = alc260_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
else if (!err) {
printk(KERN_INFO
@@ -3833,10 +4095,8 @@
if (!spec->no_analog) {
err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
set_beep_amp(spec, 0x07, 0x05, HDA_INPUT);
}
@@ -3854,6 +4114,10 @@
#endif
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
@@ -3880,6 +4144,7 @@
PINFIX_LENOVO_Y530,
PINFIX_PB_M5210,
PINFIX_ACER_ASPIRE_7736,
+ PINFIX_ASUS_W90V,
};
static const struct alc_fixup alc882_fixups[] = {
@@ -3911,10 +4176,18 @@
.type = ALC_FIXUP_SKU,
.v.sku = ALC_FIXUP_SKU_IGNORE,
},
+ [PINFIX_ASUS_W90V] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x16, 0x99130110 }, /* fix sequence for CLFE */
+ { }
+ }
+ },
};
static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", PINFIX_PB_M5210),
+ SND_PCI_QUIRK(0x1043, 0x1873, "ASUS W90V", PINFIX_ASUS_W90V),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", PINFIX_LENOVO_Y530),
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", PINFIX_ACER_ASPIRE_7736),
@@ -3961,6 +4234,10 @@
break;
}
+ err = alc_codec_rename_from_preset(codec);
+ if (err < 0)
+ goto error;
+
board_config = alc_board_config(codec, ALC882_MODEL_LAST,
alc882_models, alc882_cfg_tbl);
@@ -3984,10 +4261,8 @@
if (board_config == ALC_MODEL_AUTO) {
/* automatic parse from the BIOS config */
err = alc882_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
else if (!err) {
printk(KERN_INFO
@@ -4012,10 +4287,8 @@
if (!spec->no_analog && has_cdefine_beep(codec)) {
err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
@@ -4034,6 +4307,10 @@
#endif
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
@@ -4138,10 +4415,8 @@
if (board_config == ALC_MODEL_AUTO) {
/* automatic parse from the BIOS config */
err = alc262_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
else if (!err) {
printk(KERN_INFO
@@ -4166,10 +4441,8 @@
if (!spec->no_analog && has_cdefine_beep(codec)) {
err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
@@ -4189,6 +4462,10 @@
#endif
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
/*
@@ -4237,14 +4514,9 @@
/*
*/
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-#include "alc268_quirks.c"
-#endif
-
static int patch_alc268(struct hda_codec *codec)
{
struct alc_spec *spec;
- int board_config;
int i, has_beep, err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -4255,38 +4527,10 @@
/* ALC268 has no aa-loopback mixer */
- board_config = alc_board_config(codec, ALC268_MODEL_LAST,
- alc268_models, alc268_cfg_tbl);
-
- if (board_config < 0)
- board_config = alc_board_codec_sid_config(codec,
- ALC268_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
-
- if (board_config < 0) {
- printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
- codec->chip_name);
- board_config = ALC_MODEL_AUTO;
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc268_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
- else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC268_3ST;
- }
-#endif
- }
-
- if (board_config != ALC_MODEL_AUTO)
- setup_preset(codec, &alc268_presets[board_config]);
+ /* automatic parse from the BIOS config */
+ err = alc268_parse_auto_config(codec);
+ if (err < 0)
+ goto error;
has_beep = 0;
for (i = 0; i < spec->num_mixers; i++) {
@@ -4298,10 +4542,8 @@
if (has_beep) {
err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
if (!query_amp_caps(codec, 0x1d, HDA_INPUT))
/* override the amp caps for beep generator */
snd_hda_override_amp_caps(codec, 0x1d, HDA_INPUT,
@@ -4323,13 +4565,16 @@
spec->vmaster_nid = 0x02;
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC_MODEL_AUTO)
- spec->init_hook = alc_auto_init_std;
+ spec->init_hook = alc_auto_init_std;
spec->shutup = alc_eapd_shutup;
alc_init_jacks(codec);
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
/*
@@ -4423,9 +4668,9 @@
static void alc269_shutup(struct hda_codec *codec)
{
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x017)
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x017)
alc269_toggle_power_output(codec, 0);
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x018) {
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
alc269_toggle_power_output(codec, 0);
msleep(150);
}
@@ -4434,19 +4679,19 @@
#ifdef CONFIG_PM
static int alc269_resume(struct hda_codec *codec)
{
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x018) {
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
alc269_toggle_power_output(codec, 0);
msleep(150);
}
codec->patch_ops.init(codec);
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x017) {
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x017) {
alc269_toggle_power_output(codec, 1);
msleep(200);
}
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x018)
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x018)
alc269_toggle_power_output(codec, 1);
snd_hda_codec_resume_amp(codec);
@@ -4515,6 +4760,30 @@
alc_write_coef_idx(codec, 0x07, coef | 0x80);
}
+static void alc269_quanta_automute(struct hda_codec *codec)
+{
+ update_outputs(codec);
+
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_COEF_INDEX, 0x0c);
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_PROC_COEF, 0x680);
+
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_COEF_INDEX, 0x0c);
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_PROC_COEF, 0x480);
+}
+
+static void alc269_fixup_quanta_mute(struct hda_codec *codec,
+ const struct alc_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+ if (action != ALC_FIXUP_ACT_PROBE)
+ return;
+ spec->automute_hook = alc269_quanta_automute;
+}
+
enum {
ALC269_FIXUP_SONY_VAIO,
ALC275_FIXUP_SONY_VAIO_GPIO2,
@@ -4526,6 +4795,12 @@
ALC271_FIXUP_DMIC,
ALC269_FIXUP_PCM_44K,
ALC269_FIXUP_STEREO_DMIC,
+ ALC269_FIXUP_QUANTA_MUTE,
+ ALC269_FIXUP_LIFEBOOK,
+ ALC269_FIXUP_AMIC,
+ ALC269_FIXUP_DMIC,
+ ALC269VB_FIXUP_AMIC,
+ ALC269VB_FIXUP_DMIC,
};
static const struct alc_fixup alc269_fixups[] = {
@@ -4592,6 +4867,60 @@
.type = ALC_FIXUP_FUNC,
.v.func = alc269_fixup_stereo_dmic,
},
+ [ALC269_FIXUP_QUANTA_MUTE] = {
+ .type = ALC_FIXUP_FUNC,
+ .v.func = alc269_fixup_quanta_mute,
+ },
+ [ALC269_FIXUP_LIFEBOOK] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x1a, 0x2101103f }, /* dock line-out */
+ { 0x1b, 0x23a11040 }, /* dock mic-in */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC269_FIXUP_QUANTA_MUTE
+ },
+ [ALC269_FIXUP_AMIC] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x15, 0x0121401f }, /* HP out */
+ { 0x18, 0x01a19c20 }, /* mic */
+ { 0x19, 0x99a3092f }, /* int-mic */
+ { }
+ },
+ },
+ [ALC269_FIXUP_DMIC] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x12, 0x99a3092f }, /* int-mic */
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x15, 0x0121401f }, /* HP out */
+ { 0x18, 0x01a19c20 }, /* mic */
+ { }
+ },
+ },
+ [ALC269VB_FIXUP_AMIC] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x18, 0x01a19c20 }, /* mic */
+ { 0x19, 0x99a3092f }, /* int-mic */
+ { 0x21, 0x0121401f }, /* HP out */
+ { }
+ },
+ },
+ [ALC269_FIXUP_DMIC] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x12, 0x99a3092f }, /* int-mic */
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x18, 0x01a19c20 }, /* mic */
+ { 0x21, 0x0121401f }, /* HP out */
+ { }
+ },
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -4607,13 +4936,71 @@
SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC),
+ SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK),
SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
+ SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_QUANTA_MUTE),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Lenovo Ideapd", ALC269_FIXUP_PCM_44K),
SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD),
+
+#if 1
+ /* Below is a quirk table taken from the old code.
+ * Basically the device should work as is without the fixup table.
+ * If BIOS doesn't give a proper info, enable the corresponding
+ * fixup entry.
+ */
+ SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
+ ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1013, "ASUS N61Da", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1113, "ASUS N63Jn", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1143, "ASUS B53f", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1133, "ASUS UJ20ft", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1183, "ASUS K72DR", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x11b3, "ASUS K52DR", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x11e3, "ASUS U33Jc", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80Jt", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82JV", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x12d3, "ASUS N61Jv", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1383, "ASUS UJ30Jc", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x13d3, "ASUS N61JA", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1413, "ASUS UL50", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1443, "ASUS UL30", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1453, "ASUS M60Jv", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1483, "ASUS UL80", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x14f3, "ASUS F83Vf", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x14e3, "ASUS UL20", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1513, "ASUS UX30", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1593, "ASUS N51Vn", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15a3, "ASUS N60Jv", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15b3, "ASUS N60Dp", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15c3, "ASUS N70De", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15e3, "ASUS F83T", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1643, "ASUS M60J", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x152d, 0x1778, "Quanta ON1", ALC269_FIXUP_DMIC),
+ SND_PCI_QUIRK(0x17aa, 0x3be9, "Quanta Wistron", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_AMIC),
+ SND_PCI_QUIRK(0x17ff, 0x059a, "Quanta EL3", ALC269_FIXUP_DMIC),
+ SND_PCI_QUIRK(0x17ff, 0x059b, "Quanta JR1", ALC269_FIXUP_DMIC),
+#endif
+ {}
+};
+
+static const struct alc_model_fixup alc269_fixup_models[] = {
+ {.id = ALC269_FIXUP_AMIC, .name = "laptop-amic"},
+ {.id = ALC269_FIXUP_DMIC, .name = "laptop-dmic"},
{}
};
@@ -4622,23 +5009,23 @@
{
int val;
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) < 0x015) {
+ if ((alc_get_coef0(codec) & 0x00ff) < 0x015) {
alc_write_coef_idx(codec, 0xf, 0x960b);
alc_write_coef_idx(codec, 0xe, 0x8817);
}
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x016) {
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x016) {
alc_write_coef_idx(codec, 0xf, 0x960b);
alc_write_coef_idx(codec, 0xe, 0x8814);
}
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x017) {
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x017) {
val = alc_read_coef_idx(codec, 0x04);
/* Power up output pin */
alc_write_coef_idx(codec, 0x04, val | (1<<11));
}
- if ((alc_read_coef_idx(codec, 0) & 0x00ff) == 0x018) {
+ if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
val = alc_read_coef_idx(codec, 0xd);
if ((val & 0x0c00) >> 10 != 0x1) {
/* Capless ramp up clock control */
@@ -4662,15 +5049,10 @@
/*
*/
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-#include "alc269_quirks.c"
-#endif
-
static int patch_alc269(struct hda_codec *codec)
{
struct alc_spec *spec;
- int board_config, coef;
- int err;
+ int err = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
@@ -4682,72 +5064,41 @@
alc_auto_parse_customize_define(codec);
+ err = alc_codec_rename_from_preset(codec);
+ if (err < 0)
+ goto error;
+
if (codec->vendor_id == 0x10ec0269) {
spec->codec_variant = ALC269_TYPE_ALC269VA;
- coef = alc_read_coef_idx(codec, 0);
- if ((coef & 0x00f0) == 0x0010) {
+ switch (alc_get_coef0(codec) & 0x00f0) {
+ case 0x0010:
if (codec->bus->pci->subsystem_vendor == 0x1025 &&
- spec->cdefine.platform_type == 1) {
- alc_codec_rename(codec, "ALC271X");
- } else if ((coef & 0xf000) == 0x2000) {
- alc_codec_rename(codec, "ALC259");
- } else if ((coef & 0xf000) == 0x3000) {
- alc_codec_rename(codec, "ALC258");
- } else if ((coef & 0xfff0) == 0x3010) {
- alc_codec_rename(codec, "ALC277");
- } else {
- alc_codec_rename(codec, "ALC269VB");
- }
+ spec->cdefine.platform_type == 1)
+ err = alc_codec_rename(codec, "ALC271X");
spec->codec_variant = ALC269_TYPE_ALC269VB;
- } else if ((coef & 0x00f0) == 0x0020) {
- if (coef == 0xa023)
- alc_codec_rename(codec, "ALC259");
- else if (coef == 0x6023)
- alc_codec_rename(codec, "ALC281X");
- else if (codec->bus->pci->subsystem_vendor == 0x17aa &&
- codec->bus->pci->subsystem_device == 0x21f3)
- alc_codec_rename(codec, "ALC3202");
- else
- alc_codec_rename(codec, "ALC269VC");
+ break;
+ case 0x0020:
+ if (codec->bus->pci->subsystem_vendor == 0x17aa &&
+ codec->bus->pci->subsystem_device == 0x21f3)
+ err = alc_codec_rename(codec, "ALC3202");
spec->codec_variant = ALC269_TYPE_ALC269VC;
- } else
+ break;
+ default:
alc_fix_pll_init(codec, 0x20, 0x04, 15);
+ }
+ if (err < 0)
+ goto error;
alc269_fill_coef(codec);
}
- board_config = alc_board_config(codec, ALC269_MODEL_LAST,
- alc269_models, alc269_cfg_tbl);
+ alc_pick_fixup(codec, alc269_fixup_models,
+ alc269_fixup_tbl, alc269_fixups);
+ alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
- if (board_config < 0) {
- printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
- codec->chip_name);
- board_config = ALC_MODEL_AUTO;
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- alc_pick_fixup(codec, NULL, alc269_fixup_tbl, alc269_fixups);
- alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc269_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
- else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC269_BASIC;
- }
-#endif
- }
-
- if (board_config != ALC_MODEL_AUTO)
- setup_preset(codec, &alc269_presets[board_config]);
+ /* automatic parse from the BIOS config */
+ err = alc269_parse_auto_config(codec);
+ if (err < 0)
+ goto error;
if (!spec->no_analog && !spec->adc_nids) {
alc_auto_fill_adc_caps(codec);
@@ -4760,10 +5111,8 @@
if (!spec->no_analog && has_cdefine_beep(codec)) {
err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
}
@@ -4775,8 +5124,7 @@
#ifdef CONFIG_PM
codec->patch_ops.resume = alc269_resume;
#endif
- if (board_config == ALC_MODEL_AUTO)
- spec->init_hook = alc_auto_init_std;
+ spec->init_hook = alc_auto_init_std;
spec->shutup = alc269_shutup;
alc_init_jacks(codec);
@@ -4788,6 +5136,10 @@
#endif
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
/*
@@ -4835,14 +5187,9 @@
/*
*/
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-#include "alc861_quirks.c"
-#endif
-
static int patch_alc861(struct hda_codec *codec)
{
struct alc_spec *spec;
- int board_config;
int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -4853,39 +5200,13 @@
spec->mixer_nid = 0x15;
- board_config = alc_board_config(codec, ALC861_MODEL_LAST,
- alc861_models, alc861_cfg_tbl);
+ alc_pick_fixup(codec, NULL, alc861_fixup_tbl, alc861_fixups);
+ alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
- if (board_config < 0) {
- printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
- codec->chip_name);
- board_config = ALC_MODEL_AUTO;
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- alc_pick_fixup(codec, NULL, alc861_fixup_tbl, alc861_fixups);
- alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc861_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
- else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC861_3ST_DIG;
- }
-#endif
- }
-
- if (board_config != ALC_MODEL_AUTO)
- setup_preset(codec, &alc861_presets[board_config]);
+ /* automatic parse from the BIOS config */
+ err = alc861_parse_auto_config(codec);
+ if (err < 0)
+ goto error;
if (!spec->no_analog && !spec->adc_nids) {
alc_auto_fill_adc_caps(codec);
@@ -4898,10 +5219,8 @@
if (!spec->no_analog) {
err = snd_hda_attach_beep_device(codec, 0x23);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
}
@@ -4910,18 +5229,18 @@
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC_MODEL_AUTO) {
- spec->init_hook = alc_auto_init_std;
+ spec->init_hook = alc_auto_init_std;
#ifdef CONFIG_SND_HDA_POWER_SAVE
- spec->power_hook = alc_power_eapd;
-#endif
- }
-#ifdef CONFIG_SND_HDA_POWER_SAVE
+ spec->power_hook = alc_power_eapd;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc861_loopbacks;
#endif
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
/*
@@ -4943,24 +5262,41 @@
}
enum {
- ALC660VD_FIX_ASUS_GPIO1
+ ALC660VD_FIX_ASUS_GPIO1,
+ ALC861VD_FIX_DALLAS,
};
-/* reset GPIO1 */
+/* exclude VREF80 */
+static void alc861vd_fixup_dallas(struct hda_codec *codec,
+ const struct alc_fixup *fix, int action)
+{
+ if (action == ALC_FIXUP_ACT_PRE_PROBE) {
+ snd_hda_override_pin_caps(codec, 0x18, 0x00001714);
+ snd_hda_override_pin_caps(codec, 0x19, 0x0000171c);
+ }
+}
+
static const struct alc_fixup alc861vd_fixups[] = {
[ALC660VD_FIX_ASUS_GPIO1] = {
.type = ALC_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
+ /* reset GPIO1 */
{0x01, AC_VERB_SET_GPIO_MASK, 0x03},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
{ }
}
},
+ [ALC861VD_FIX_DALLAS] = {
+ .type = ALC_FIXUP_FUNC,
+ .v.func = alc861vd_fixup_dallas,
+ },
};
static const struct snd_pci_quirk alc861vd_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_FIX_DALLAS),
SND_PCI_QUIRK(0x1043, 0x1339, "ASUS A7-K", ALC660VD_FIX_ASUS_GPIO1),
+ SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_FIX_DALLAS),
{}
};
@@ -4972,14 +5308,10 @@
/*
*/
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-#include "alc861vd_quirks.c"
-#endif
-
static int patch_alc861vd(struct hda_codec *codec)
{
struct alc_spec *spec;
- int err, board_config;
+ int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
@@ -4989,39 +5321,13 @@
spec->mixer_nid = 0x0b;
- board_config = alc_board_config(codec, ALC861VD_MODEL_LAST,
- alc861vd_models, alc861vd_cfg_tbl);
+ alc_pick_fixup(codec, NULL, alc861vd_fixup_tbl, alc861vd_fixups);
+ alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
- if (board_config < 0) {
- printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
- codec->chip_name);
- board_config = ALC_MODEL_AUTO;
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- alc_pick_fixup(codec, NULL, alc861vd_fixup_tbl, alc861vd_fixups);
- alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc861vd_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
- else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC861VD_3ST;
- }
-#endif
- }
-
- if (board_config != ALC_MODEL_AUTO)
- setup_preset(codec, &alc861vd_presets[board_config]);
+ /* automatic parse from the BIOS config */
+ err = alc861vd_parse_auto_config(codec);
+ if (err < 0)
+ goto error;
if (codec->vendor_id == 0x10ec0660) {
/* always turn on EAPD */
@@ -5039,10 +5345,8 @@
if (!spec->no_analog) {
err = snd_hda_attach_beep_device(codec, 0x23);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
}
@@ -5052,8 +5356,7 @@
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC_MODEL_AUTO)
- spec->init_hook = alc_auto_init_std;
+ spec->init_hook = alc_auto_init_std;
spec->shutup = alc_eapd_shutup;
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (!spec->loopback.amplist)
@@ -5061,6 +5364,10 @@
#endif
return 0;
+
+ error:
+ alc_free(codec);
+ return err;
}
/*
@@ -5118,6 +5425,14 @@
ALC662_FIXUP_CZC_P10T,
ALC662_FIXUP_SKU_IGNORE,
ALC662_FIXUP_HP_RP5800,
+ ALC662_FIXUP_ASUS_MODE1,
+ ALC662_FIXUP_ASUS_MODE2,
+ ALC662_FIXUP_ASUS_MODE3,
+ ALC662_FIXUP_ASUS_MODE4,
+ ALC662_FIXUP_ASUS_MODE5,
+ ALC662_FIXUP_ASUS_MODE6,
+ ALC662_FIXUP_ASUS_MODE7,
+ ALC662_FIXUP_ASUS_MODE8,
};
static const struct alc_fixup alc662_fixups[] = {
@@ -5159,37 +5474,204 @@
.chained = true,
.chain_id = ALC662_FIXUP_SKU_IGNORE
},
+ [ALC662_FIXUP_ASUS_MODE1] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x18, 0x01a19c20 }, /* mic */
+ { 0x19, 0x99a3092f }, /* int-mic */
+ { 0x21, 0x0121401f }, /* HP out */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
+ [ALC662_FIXUP_ASUS_MODE2] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x18, 0x01a19820 }, /* mic */
+ { 0x19, 0x99a3092f }, /* int-mic */
+ { 0x1b, 0x0121401f }, /* HP out */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
+ [ALC662_FIXUP_ASUS_MODE3] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x15, 0x0121441f }, /* HP */
+ { 0x18, 0x01a19840 }, /* mic */
+ { 0x19, 0x99a3094f }, /* int-mic */
+ { 0x21, 0x01211420 }, /* HP2 */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
+ [ALC662_FIXUP_ASUS_MODE4] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x16, 0x99130111 }, /* speaker */
+ { 0x18, 0x01a19840 }, /* mic */
+ { 0x19, 0x99a3094f }, /* int-mic */
+ { 0x21, 0x0121441f }, /* HP */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
+ [ALC662_FIXUP_ASUS_MODE5] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x15, 0x0121441f }, /* HP */
+ { 0x16, 0x99130111 }, /* speaker */
+ { 0x18, 0x01a19840 }, /* mic */
+ { 0x19, 0x99a3094f }, /* int-mic */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
+ [ALC662_FIXUP_ASUS_MODE6] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x15, 0x01211420 }, /* HP2 */
+ { 0x18, 0x01a19840 }, /* mic */
+ { 0x19, 0x99a3094f }, /* int-mic */
+ { 0x1b, 0x0121441f }, /* HP */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
+ [ALC662_FIXUP_ASUS_MODE7] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x17, 0x99130111 }, /* speaker */
+ { 0x18, 0x01a19840 }, /* mic */
+ { 0x19, 0x99a3094f }, /* int-mic */
+ { 0x1b, 0x01214020 }, /* HP */
+ { 0x21, 0x0121401f }, /* HP */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
+ [ALC662_FIXUP_ASUS_MODE8] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x14, 0x99130110 }, /* speaker */
+ { 0x12, 0x99a30970 }, /* int-mic */
+ { 0x15, 0x01214020 }, /* HP */
+ { 0x17, 0x99130111 }, /* speaker */
+ { 0x18, 0x01a19840 }, /* mic */
+ { 0x21, 0x0121401f }, /* HP */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC662_FIXUP_SKU_IGNORE
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
+ SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2),
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
+
+#if 0
+ /* Below is a quirk table taken from the old code.
+ * Basically the device should work as is without the fixup table.
+ * If BIOS doesn't give a proper info, enable the corresponding
+ * fixup entry.
+ */
+ SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC662_FIXUP_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x1173, "ASUS K73Jn", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC662_FIXUP_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1203, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1303, "ASUS G60J", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1333, "ASUS G60Jx", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1339, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x13e3, "ASUS N71JA", ALC662_FIXUP_ASUS_MODE7),
+ SND_PCI_QUIRK(0x1043, 0x1463, "ASUS N71", ALC662_FIXUP_ASUS_MODE7),
+ SND_PCI_QUIRK(0x1043, 0x14d3, "ASUS G72", ALC662_FIXUP_ASUS_MODE8),
+ SND_PCI_QUIRK(0x1043, 0x1563, "ASUS N90", ALC662_FIXUP_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x15d3, "ASUS N50SF F50SF", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x16f3, "ASUS K40C K50C", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1733, "ASUS N81De", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC662_FIXUP_ASUS_MODE6),
+ SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC662_FIXUP_ASUS_MODE6),
+ SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1793, "ASUS F50GX", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC662_FIXUP_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC662_FIXUP_ASUS_MODE5),
+ SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC662_FIXUP_ASUS_MODE6),
+ SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC662_FIXUP_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC662_FIXUP_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18c3, "ASUS VX5", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC662_FIXUP_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_FIXUP_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC662_FIXUP_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC662_FIXUP_ASUS_MODE4),
+#endif
{}
};
static const struct alc_model_fixup alc662_fixup_models[] = {
{.id = ALC272_FIXUP_MARIO, .name = "mario"},
+ {.id = ALC662_FIXUP_ASUS_MODE1, .name = "asus-mode1"},
+ {.id = ALC662_FIXUP_ASUS_MODE2, .name = "asus-mode2"},
+ {.id = ALC662_FIXUP_ASUS_MODE3, .name = "asus-mode3"},
+ {.id = ALC662_FIXUP_ASUS_MODE4, .name = "asus-mode4"},
+ {.id = ALC662_FIXUP_ASUS_MODE5, .name = "asus-mode5"},
+ {.id = ALC662_FIXUP_ASUS_MODE6, .name = "asus-mode6"},
+ {.id = ALC662_FIXUP_ASUS_MODE7, .name = "asus-mode7"},
+ {.id = ALC662_FIXUP_ASUS_MODE8, .name = "asus-mode8"},
{}
};
/*
*/
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-#include "alc662_quirks.c"
-#endif
-
static int patch_alc662(struct hda_codec *codec)
{
struct alc_spec *spec;
- int err, board_config;
- int coef;
+ int err = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (!spec)
@@ -5199,50 +5681,31 @@
spec->mixer_nid = 0x0b;
+ /* handle multiple HPs as is */
+ spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
+
alc_auto_parse_customize_define(codec);
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- coef = alc_read_coef_idx(codec, 0);
- if (coef == 0x8020 || coef == 0x8011)
- alc_codec_rename(codec, "ALC661");
- else if (coef & (1 << 14) &&
- codec->bus->pci->subsystem_vendor == 0x1025 &&
- spec->cdefine.platform_type == 1)
- alc_codec_rename(codec, "ALC272X");
- else if (coef == 0x4011)
- alc_codec_rename(codec, "ALC656");
+ err = alc_codec_rename_from_preset(codec);
+ if (err < 0)
+ goto error;
- board_config = alc_board_config(codec, ALC662_MODEL_LAST,
- alc662_models, alc662_cfg_tbl);
- if (board_config < 0) {
- printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
- codec->chip_name);
- board_config = ALC_MODEL_AUTO;
+ if ((alc_get_coef0(codec) & (1 << 14)) &&
+ codec->bus->pci->subsystem_vendor == 0x1025 &&
+ spec->cdefine.platform_type == 1) {
+ if (alc_codec_rename(codec, "ALC272X") < 0)
+ goto error;
}
- if (board_config == ALC_MODEL_AUTO) {
- alc_pick_fixup(codec, alc662_fixup_models,
- alc662_fixup_tbl, alc662_fixups);
- alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
- /* automatic parse from the BIOS config */
- err = alc662_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
- else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC662_3ST_2ch_DIG;
- }
-#endif
- }
-
- if (board_config != ALC_MODEL_AUTO)
- setup_preset(codec, &alc662_presets[board_config]);
+ alc_pick_fixup(codec, alc662_fixup_models,
+ alc662_fixup_tbl, alc662_fixups);
+ alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
+ /* automatic parse from the BIOS config */
+ err = alc662_parse_auto_config(codec);
+ if (err < 0)
+ goto error;
if (!spec->no_analog && !spec->adc_nids) {
alc_auto_fill_adc_caps(codec);
@@ -5255,10 +5718,8 @@
if (!spec->no_analog && has_cdefine_beep(codec)) {
err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
+ if (err < 0)
+ goto error;
switch (codec->vendor_id) {
case 0x10ec0662:
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
@@ -5278,8 +5739,7 @@
alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE);
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC_MODEL_AUTO)
- spec->init_hook = alc_auto_init_std;
+ spec->init_hook = alc_auto_init_std;
spec->shutup = alc_eapd_shutup;
alc_init_jacks(codec);
@@ -5290,32 +5750,10 @@
#endif
return 0;
-}
-static int patch_alc888(struct hda_codec *codec)
-{
- if ((alc_read_coef_idx(codec, 0) & 0x00f0)==0x0030){
- kfree(codec->chip_name);
- if (codec->vendor_id == 0x10ec0887)
- codec->chip_name = kstrdup("ALC887-VD", GFP_KERNEL);
- else
- codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
- if (!codec->chip_name) {
- alc_free(codec);
- return -ENOMEM;
- }
- return patch_alc662(codec);
- }
- return patch_alc882(codec);
-}
-
-static int patch_alc899(struct hda_codec *codec)
-{
- if ((alc_read_coef_idx(codec, 0) & 0x2000) != 0x2000) {
- kfree(codec->chip_name);
- codec->chip_name = kstrdup("ALC898", GFP_KERNEL);
- }
- return patch_alc882(codec);
+ error:
+ alc_free(codec);
+ return err;
}
/*
@@ -5329,14 +5767,9 @@
/*
*/
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
-#include "alc680_quirks.c"
-#endif
-
static int patch_alc680(struct hda_codec *codec)
{
struct alc_spec *spec;
- int board_config;
int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -5347,43 +5780,11 @@
/* ALC680 has no aa-loopback mixer */
- board_config = alc_board_config(codec, ALC680_MODEL_LAST,
- alc680_models, alc680_cfg_tbl);
-
- if (board_config < 0) {
- printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
- codec->chip_name);
- board_config = ALC_MODEL_AUTO;
- }
-
- if (board_config == ALC_MODEL_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc680_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
- else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC680_BASE;
- }
-#endif
- }
-
- if (board_config != ALC_MODEL_AUTO) {
- setup_preset(codec, &alc680_presets[board_config]);
-#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
- spec->stream_analog_capture = &alc680_pcm_analog_auto_capture;
-#endif
- }
-
- if (!spec->no_analog && !spec->adc_nids) {
- alc_auto_fill_adc_caps(codec);
- alc_rebuild_imux_for_auto_mic(codec);
- alc_remove_invalid_adc_nids(codec);
+ /* automatic parse from the BIOS config */
+ err = alc680_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
}
if (!spec->no_analog && !spec->cap_mixer)
@@ -5392,8 +5793,7 @@
spec->vmaster_nid = 0x02;
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC_MODEL_AUTO)
- spec->init_hook = alc_auto_init_std;
+ spec->init_hook = alc_auto_init_std;
return 0;
}
@@ -5421,6 +5821,8 @@
.patch = patch_alc882 },
{ .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
.patch = patch_alc662 },
+ { .id = 0x10ec0662, .rev = 0x100300, .name = "ALC662 rev3",
+ .patch = patch_alc662 },
{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
@@ -5433,13 +5835,13 @@
{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
.patch = patch_alc882 },
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
- { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc888 },
+ { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
.patch = patch_alc882 },
- { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc888 },
+ { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc882 },
{ .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 },
{ .id = 0x10ec0892, .name = "ALC892", .patch = patch_alc662 },
- { .id = 0x10ec0899, .name = "ALC899", .patch = patch_alc899 },
+ { .id = 0x10ec0899, .name = "ALC898", .patch = patch_alc882 },
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 987e3cf..59a52a4 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -2972,8 +2972,9 @@
static hda_nid_t get_unassigned_dac(struct hda_codec *codec, hda_nid_t nid)
{
struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
int j, conn_len;
- hda_nid_t conn[HDA_MAX_CONNECTIONS];
+ hda_nid_t conn[HDA_MAX_CONNECTIONS], fallback_dac;
unsigned int wcaps, wtype;
conn_len = snd_hda_get_connections(codec, nid, conn,
@@ -3001,10 +3002,21 @@
return conn[j];
}
}
- /* if all DACs are already assigned, connect to the primary DAC */
+
+ /* if all DACs are already assigned, connect to the primary DAC,
+ unless we're assigning a secondary headphone */
+ fallback_dac = spec->multiout.dac_nids[0];
+ if (spec->multiout.hp_nid) {
+ for (j = 0; j < cfg->hp_outs; j++)
+ if (cfg->hp_pins[j] == nid) {
+ fallback_dac = spec->multiout.hp_nid;
+ break;
+ }
+ }
+
if (conn_len > 1) {
for (j = 0; j < conn_len; j++) {
- if (conn[j] == spec->multiout.dac_nids[0]) {
+ if (conn[j] == fallback_dac) {
snd_hda_codec_write_cache(codec, nid, 0,
AC_VERB_SET_CONNECT_SEL, j);
break;
@@ -4130,22 +4142,14 @@
#ifdef CONFIG_SND_HDA_INPUT_JACK
int def_conf = snd_hda_codec_get_pincfg(codec, nid);
int connectivity = get_defcfg_connect(def_conf);
- char name[32];
- int err;
if (connectivity && connectivity != AC_JACK_PORT_FIXED)
return 0;
- snprintf(name, sizeof(name), "%s at %s %s Jack",
- snd_hda_get_jack_type(def_conf),
- snd_hda_get_jack_connectivity(def_conf),
- snd_hda_get_jack_location(def_conf));
-
- err = snd_hda_input_jack_add(codec, nid, type, name);
- if (err < 0)
- return err;
-#endif /* CONFIG_SND_HDA_INPUT_JACK */
+ return snd_hda_input_jack_add(codec, nid, type, NULL);
+#else
return 0;
+#endif /* CONFIG_SND_HDA_INPUT_JACK */
}
static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid,
@@ -5585,9 +5589,7 @@
static int patch_stac92hd83xxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
- hda_nid_t conn[STAC92HD83_DAC_COUNT + 1];
int err;
- int num_dacs;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
@@ -5689,22 +5691,6 @@
return err;
}
- /* docking output support */
- num_dacs = snd_hda_get_connections(codec, 0xF,
- conn, STAC92HD83_DAC_COUNT + 1) - 1;
- /* skip non-DAC connections */
- while (num_dacs >= 0 &&
- (get_wcaps_type(get_wcaps(codec, conn[num_dacs]))
- != AC_WID_AUD_OUT))
- num_dacs--;
- /* set port E and F to select the last DAC */
- if (num_dacs >= 0) {
- snd_hda_codec_write_cache(codec, 0xE, 0,
- AC_VERB_SET_CONNECT_SEL, num_dacs);
- snd_hda_codec_write_cache(codec, 0xF, 0,
- AC_VERB_SET_CONNECT_SEL, num_dacs);
- }
-
codec->proc_widget_hook = stac92hd_proc_hook;
return 0;
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 4ebfbd8..417d62a 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1506,39 +1506,49 @@
struct via_spec *spec = codec->spec;
struct hda_pcm *info = spec->pcm_rec;
- codec->num_pcms = 1;
+ codec->num_pcms = 0;
codec->pcm_info = info;
- snprintf(spec->stream_name_analog, sizeof(spec->stream_name_analog),
- "%s Analog", codec->chip_name);
- info->name = spec->stream_name_analog;
+ if (spec->multiout.num_dacs || spec->num_adc_nids) {
+ snprintf(spec->stream_name_analog,
+ sizeof(spec->stream_name_analog),
+ "%s Analog", codec->chip_name);
+ info->name = spec->stream_name_analog;
- if (!spec->stream_analog_playback)
- spec->stream_analog_playback = &via_pcm_analog_playback;
- info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
- *spec->stream_analog_playback;
- info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid =
- spec->multiout.dac_nids[0];
- info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
- spec->multiout.max_channels;
+ if (spec->multiout.num_dacs) {
+ if (!spec->stream_analog_playback)
+ spec->stream_analog_playback =
+ &via_pcm_analog_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+ *spec->stream_analog_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid =
+ spec->multiout.dac_nids[0];
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
+ spec->multiout.max_channels;
+ }
- if (!spec->stream_analog_capture) {
- if (spec->dyn_adc_switch)
- spec->stream_analog_capture =
- &via_pcm_dyn_adc_analog_capture;
- else
- spec->stream_analog_capture = &via_pcm_analog_capture;
- }
- info->stream[SNDRV_PCM_STREAM_CAPTURE] =
- *spec->stream_analog_capture;
- info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
- if (!spec->dyn_adc_switch)
- info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams =
- spec->num_adc_nids;
-
- if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
+ if (!spec->stream_analog_capture) {
+ if (spec->dyn_adc_switch)
+ spec->stream_analog_capture =
+ &via_pcm_dyn_adc_analog_capture;
+ else
+ spec->stream_analog_capture =
+ &via_pcm_analog_capture;
+ }
+ if (spec->num_adc_nids) {
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] =
+ *spec->stream_analog_capture;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid =
+ spec->adc_nids[0];
+ if (!spec->dyn_adc_switch)
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams =
+ spec->num_adc_nids;
+ }
codec->num_pcms++;
info++;
+ }
+
+ if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
snprintf(spec->stream_name_digital,
sizeof(spec->stream_name_digital),
"%s Digital", codec->chip_name);
@@ -1562,17 +1572,19 @@
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid =
spec->dig_in_nid;
}
+ codec->num_pcms++;
+ info++;
}
if (spec->hp_dac_nid) {
- codec->num_pcms++;
- info++;
snprintf(spec->stream_name_hp, sizeof(spec->stream_name_hp),
"%s HP", codec->chip_name);
info->name = spec->stream_name_hp;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = via_pcm_hp_playback;
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid =
spec->hp_dac_nid;
+ codec->num_pcms++;
+ info++;
}
return 0;
}
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 0ccc0eb..8531b98 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2748,8 +2748,9 @@
if (!c->no_mpu401) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712,
ICEREG(ice, MPU1_CTRL),
- (c->mpu401_1_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[0]);
+ c->mpu401_1_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[0]);
if (err < 0) {
snd_card_free(card);
return err;
@@ -2764,8 +2765,9 @@
/* 2nd port used */
err = snd_mpu401_uart_new(card, 1, MPU401_HW_ICE1712,
ICEREG(ice, MPU2_CTRL),
- (c->mpu401_2_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[1]);
+ c->mpu401_2_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[1]);
if (err < 0) {
snd_card_free(card);
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 0378126..2fd4bf2 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -2820,8 +2820,8 @@
/* TODO enable MIDI IRQ and I/O */
err = snd_mpu401_uart_new(chip->card, 0, MPU401_HW_MPU401,
chip->iobase + MPU401_DATA_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi);
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
printk(KERN_WARNING "maestro3: no MIDI support.\n");
#endif
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index 82311fc..53e5508 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -678,15 +678,15 @@
goto err_card;
if (chip->model.device_config & (MIDI_OUTPUT | MIDI_INPUT)) {
- unsigned int info_flags = MPU401_INFO_INTEGRATED;
+ unsigned int info_flags =
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK;
if (chip->model.device_config & MIDI_OUTPUT)
info_flags |= MPU401_INFO_OUTPUT;
if (chip->model.device_config & MIDI_INPUT)
info_flags |= MPU401_INFO_INPUT;
err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
chip->addr + OXYGEN_MPU401,
- info_flags, 0, 0,
- &chip->midi);
+ info_flags, -1, &chip->midi);
if (err < 0)
goto err_card;
}
diff --git a/sound/pci/oxygen/xonar_pcm179x.c b/sound/pci/oxygen/xonar_pcm179x.c
index 32d096c..8433aa7c 100644
--- a/sound/pci/oxygen/xonar_pcm179x.c
+++ b/sound/pci/oxygen/xonar_pcm179x.c
@@ -1074,6 +1074,7 @@
.device_config = PLAYBACK_0_TO_I2S |
PLAYBACK_1_TO_SPDIF |
CAPTURE_0_FROM_I2S_2 |
+ CAPTURE_1_FROM_SPDIF |
AC97_FMIC_SWITCH,
.dac_channels_pcm = 2,
.dac_channels_mixer = 2,
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index e34ae14..88cc776 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2109,7 +2109,7 @@
val = mpu_port[dev];
pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val);
err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
- val, 0, chip->irq, 0,
+ val, MPU401_INFO_IRQ_HOOK, -1,
&chip->rmidi);
if (err < 0)
snd_printk(KERN_WARNING
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 493e394..6e2f7ef 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -1241,10 +1241,30 @@
return rate;
}
+/* return latency in samples per period */
+static int hdspm_get_latency(struct hdspm *hdspm)
+{
+ int n;
+
+ n = hdspm_decode_latency(hdspm->control_register);
+
+ /* Special case for new RME cards with 32 samples period size.
+ * The three latency bits in the control register
+ * (HDSP_LatencyMask) encode latency values of 64 samples as
+ * 0, 128 samples as 1 ... 4096 samples as 6. For old cards, 7
+ * denotes 8192 samples, but on new cards like RayDAT or AIO,
+ * it corresponds to 32 samples.
+ */
+ if ((7 == n) && (RayDAT == hdspm->io_type || AIO == hdspm->io_type))
+ n = -1;
+
+ return 1 << (n + 6);
+}
+
/* Latency function */
static inline void hdspm_compute_period_size(struct hdspm *hdspm)
{
- hdspm->period_bytes = 1 << ((hdspm_decode_latency(hdspm->control_register) + 8));
+ hdspm->period_bytes = 4 * hdspm_get_latency(hdspm);
}
@@ -1303,12 +1323,27 @@
spin_lock_irq(&s->lock);
- frames >>= 7;
- n = 0;
- while (frames) {
- n++;
- frames >>= 1;
+ if (32 == frames) {
+ /* Special case for new RME cards like RayDAT/AIO which
+ * support period sizes of 32 samples. Since latency is
+ * encoded in the three bits of HDSP_LatencyMask, we can only
+ * have values from 0 .. 7. While 0 still means 64 samples and
+ * 6 represents 4096 samples on all cards, 7 represents 8192
+ * on older cards and 32 samples on new cards.
+ *
+ * In other words, period size in samples is calculated by
+ * 2^(n+6) with n ranging from 0 .. 7.
+ */
+ n = 7;
+ } else {
+ frames >>= 7;
+ n = 0;
+ while (frames) {
+ n++;
+ frames >>= 1;
+ }
}
+
s->control_register &= ~HDSPM_LatencyMask;
s->control_register |= hdspm_encode_latency(n);
@@ -4801,8 +4836,7 @@
snd_iprintf(buffer, "--- Settings ---\n");
- x = 1 << (6 + hdspm_decode_latency(hdspm->control_register &
- HDSPM_LatencyMask));
+ x = hdspm_get_latency(hdspm);
snd_iprintf(buffer,
"Size (Latency): %d samples (2 periods of %lu bytes)\n",
@@ -4965,8 +4999,7 @@
snd_iprintf(buffer, "--- Settings ---\n");
- x = 1 << (6 + hdspm_decode_latency(hdspm->control_register &
- HDSPM_LatencyMask));
+ x = hdspm_get_latency(hdspm);
snd_iprintf(buffer,
"Size (Latency): %d samples (2 periods of %lu bytes)\n",
@@ -5672,19 +5705,6 @@
return 0;
}
-static unsigned int period_sizes_old[] = {
- 64, 128, 256, 512, 1024, 2048, 4096
-};
-
-static unsigned int period_sizes_new[] = {
- 32, 64, 128, 256, 512, 1024, 2048, 4096
-};
-
-/* RayDAT and AIO always have a buffer of 16384 samples per channel */
-static unsigned int raydat_aio_buffer_sizes[] = {
- 16384
-};
-
static struct snd_pcm_hardware snd_hdspm_playback_subinfo = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
@@ -5703,8 +5723,8 @@
.channels_max = HDSPM_MAX_CHANNELS,
.buffer_bytes_max =
HDSPM_CHANNEL_BUFFER_BYTES * HDSPM_MAX_CHANNELS,
- .period_bytes_min = (64 * 4),
- .period_bytes_max = (4096 * 4) * HDSPM_MAX_CHANNELS,
+ .period_bytes_min = (32 * 4),
+ .period_bytes_max = (8192 * 4) * HDSPM_MAX_CHANNELS,
.periods_min = 2,
.periods_max = 512,
.fifo_size = 0
@@ -5728,31 +5748,13 @@
.channels_max = HDSPM_MAX_CHANNELS,
.buffer_bytes_max =
HDSPM_CHANNEL_BUFFER_BYTES * HDSPM_MAX_CHANNELS,
- .period_bytes_min = (64 * 4),
- .period_bytes_max = (4096 * 4) * HDSPM_MAX_CHANNELS,
+ .period_bytes_min = (32 * 4),
+ .period_bytes_max = (8192 * 4) * HDSPM_MAX_CHANNELS,
.periods_min = 2,
.periods_max = 512,
.fifo_size = 0
};
-static struct snd_pcm_hw_constraint_list hw_constraints_period_sizes_old = {
- .count = ARRAY_SIZE(period_sizes_old),
- .list = period_sizes_old,
- .mask = 0
-};
-
-static struct snd_pcm_hw_constraint_list hw_constraints_period_sizes_new = {
- .count = ARRAY_SIZE(period_sizes_new),
- .list = period_sizes_new,
- .mask = 0
-};
-
-static struct snd_pcm_hw_constraint_list hw_constraints_raydat_io_buffer = {
- .count = ARRAY_SIZE(raydat_aio_buffer_sizes),
- .list = raydat_aio_buffer_sizes,
- .mask = 0
-};
-
static int snd_hdspm_hw_rule_in_channels_rate(struct snd_pcm_hw_params *params,
struct snd_pcm_hw_rule *rule)
{
@@ -5953,26 +5955,29 @@
spin_unlock_irq(&hdspm->lock);
snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
+ snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
switch (hdspm->io_type) {
case AIO:
case RayDAT:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_new);
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
- &hw_constraints_raydat_io_buffer);
-
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 32, 4096);
+ /* RayDAT & AIO have a fixed buffer of 16384 samples per channel */
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ 16384, 16384);
break;
default:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_old);
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 64, 8192);
+ break;
}
if (AES32 == hdspm->io_type) {
+ runtime->hw.rates |= SNDRV_PCM_RATE_KNOT;
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&hdspm_hw_constraints_aes32_sample_rates);
} else {
@@ -6025,24 +6030,28 @@
spin_unlock_irq(&hdspm->lock);
snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
+ snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
+
switch (hdspm->io_type) {
case AIO:
case RayDAT:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_new);
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
- &hw_constraints_raydat_io_buffer);
- break;
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 32, 4096);
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ 16384, 16384);
+ break;
default:
- snd_pcm_hw_constraint_list(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
- &hw_constraints_period_sizes_old);
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 64, 8192);
+ break;
}
if (AES32 == hdspm->io_type) {
+ runtime->hw.rates |= SNDRV_PCM_RATE_KNOT;
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&hdspm_hw_constraints_aes32_sample_rates);
} else {
@@ -6088,7 +6097,7 @@
}
static int snd_hdspm_hwdep_ioctl(struct snd_hwdep *hw, struct file *file,
- unsigned int cmd, unsigned long __user arg)
+ unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
struct hdspm *hdspm = hw->private_data;
@@ -6213,11 +6222,13 @@
info.line_out = hdspm_line_out(hdspm);
info.passthru = 0;
spin_unlock_irq(&hdspm->lock);
- if (copy_to_user((void __user *) arg, &info, sizeof(info)))
+ if (copy_to_user(argp, &info, sizeof(info)))
return -EFAULT;
break;
case SNDRV_HDSPM_IOCTL_GET_STATUS:
+ memset(&status, 0, sizeof(status));
+
status.card_type = hdspm->io_type;
status.autosync_source = hdspm_autosync_ref(hdspm);
@@ -6250,13 +6261,15 @@
break;
}
- if (copy_to_user((void __user *) arg, &status, sizeof(status)))
+ if (copy_to_user(argp, &status, sizeof(status)))
return -EFAULT;
break;
case SNDRV_HDSPM_IOCTL_GET_VERSION:
+ memset(&hdspm_version, 0, sizeof(hdspm_version));
+
hdspm_version.card_type = hdspm->io_type;
strncpy(hdspm_version.cardname, hdspm->card_name,
sizeof(hdspm_version.cardname));
@@ -6267,13 +6280,13 @@
if (hdspm->tco)
hdspm_version.addons |= HDSPM_ADDON_TCO;
- if (copy_to_user((void __user *) arg, &hdspm_version,
+ if (copy_to_user(argp, &hdspm_version,
sizeof(hdspm_version)))
return -EFAULT;
break;
case SNDRV_HDSPM_IOCTL_GET_MIXER:
- if (copy_from_user(&mixer, (void __user *)arg, sizeof(mixer)))
+ if (copy_from_user(&mixer, argp, sizeof(mixer)))
return -EFAULT;
if (copy_to_user((void __user *)mixer.mixer, hdspm->mixer,
sizeof(struct hdspm_mixer)))
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
index bcf6152..5ffb20b 100644
--- a/sound/pci/sis7019.c
+++ b/sound/pci/sis7019.c
@@ -1234,7 +1234,7 @@
goto error;
}
- if (request_irq(pci->irq, sis_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, sis_interrupt, IRQF_SHARED,
KBUILD_MODNAME, sis)) {
printk(KERN_ERR "sis7019: unable to regain IRQ %d\n", pci->irq);
goto error;
@@ -1340,7 +1340,7 @@
if (rc)
goto error_out_cleanup;
- if (request_irq(pci->irq, sis_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ if (request_irq(pci->irq, sis_interrupt, IRQF_SHARED,
KBUILD_MODNAME, sis)) {
printk(KERN_ERR "unable to allocate irq %d\n", sis->irq);
goto error_out_cleanup;
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 2571a67..c500816 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -1493,9 +1493,10 @@
return err;
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SONICVIBES,
- sonic->midi_port, MPU401_INFO_INTEGRATED,
- sonic->irq, 0,
- &midi_uart)) < 0) {
+ sonic->midi_port,
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &midi_uart)) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c
index d8a128f..5e707ef 100644
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -148,8 +148,9 @@
if (trident->device != TRIDENT_DEVICE_ID_SI7018 &&
(err = snd_mpu401_uart_new(card, 0, MPU401_HW_TRID4DWAVE,
trident->midi_port,
- MPU401_INFO_INTEGRATED,
- trident->irq, 0, &trident->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &trident->rmidi)) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index f03fd62..c3656ff 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -1175,6 +1175,7 @@
struct snd_pcm_runtime *runtime = substream->runtime;
int err;
struct via_rate_lock *ratep;
+ bool use_src = false;
runtime->hw = snd_via82xx_hw;
@@ -1196,6 +1197,7 @@
SNDRV_PCM_RATE_8000_48000);
runtime->hw.rate_min = 8000;
runtime->hw.rate_max = 48000;
+ use_src = true;
} else if (! ratep->rate) {
int idx = viadev->direction ? AC97_RATES_ADC : AC97_RATES_FRONT_DAC;
runtime->hw.rates = chip->ac97->rates[idx];
@@ -1212,6 +1214,12 @@
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
return err;
+ if (use_src) {
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0)
+ return err;
+ }
+
runtime->private_data = viadev;
viadev->substream = substream;
@@ -2068,8 +2076,9 @@
pci_write_config_byte(chip->pci, VIA_PNP_CONTROL, legacy_cfg);
if (chip->mpu_res) {
if (snd_mpu401_uart_new(chip->card, 0, MPU401_HW_VIA686A,
- mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ mpu_port, MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi) < 0) {
printk(KERN_WARNING "unable to initialize MPU-401"
" at 0x%lx, skipping\n", mpu_port);
legacy &= ~VIA_FUNC_ENABLE_MIDI;
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 511d576..3253b04 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -305,8 +305,9 @@
if (chip->mpu_res) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_YMFPCI,
mpu_port[dev],
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rawmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rawmidi)) < 0) {
printk(KERN_WARNING "ymfpci: cannot initialize MPU401 at 0x%lx, skipping...\n", mpu_port[dev]);
legacy_ctrl &= ~YMFPCI_LEGACY_MIEN; /* disable MPU401 irq */
pci_write_config_word(pci, PCIR_DSXG_LEGACY, legacy_ctrl);
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index f3260e6..66ea71b 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -897,6 +897,18 @@
struct snd_ymfpci *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_ymfpci_pcm *ypcm;
+ int err;
+
+ runtime->hw = snd_ymfpci_playback;
+ /* FIXME? True value is 256/48 = 5.33333 ms */
+ err = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_TIME,
+ 5334, UINT_MAX);
+ if (err < 0)
+ return err;
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0)
+ return err;
ypcm = kzalloc(sizeof(*ypcm), GFP_KERNEL);
if (ypcm == NULL)
@@ -904,11 +916,8 @@
ypcm->chip = chip;
ypcm->type = PLAYBACK_VOICE;
ypcm->substream = substream;
- runtime->hw = snd_ymfpci_playback;
runtime->private_data = ypcm;
runtime->private_free = snd_ymfpci_pcm_free_substream;
- /* FIXME? True value is 256/48 = 5.33333 ms */
- snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME, 5333, UINT_MAX);
return 0;
}
@@ -1013,6 +1022,18 @@
struct snd_ymfpci *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_ymfpci_pcm *ypcm;
+ int err;
+
+ runtime->hw = snd_ymfpci_capture;
+ /* FIXME? True value is 256/48 = 5.33333 ms */
+ err = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_TIME,
+ 5334, UINT_MAX);
+ if (err < 0)
+ return err;
+ err = snd_pcm_hw_rule_noresample(runtime, 48000);
+ if (err < 0)
+ return err;
ypcm = kzalloc(sizeof(*ypcm), GFP_KERNEL);
if (ypcm == NULL)
@@ -1022,9 +1043,6 @@
ypcm->substream = substream;
ypcm->capture_bank_number = capture_bank_number;
chip->capture_substream[capture_bank_number] = substream;
- runtime->hw = snd_ymfpci_capture;
- /* FIXME? True value is 256/48 = 5.33333 ms */
- snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME, 5333, UINT_MAX);
runtime->private_data = ypcm;
runtime->private_free = snd_ymfpci_pcm_free_substream;
snd_ymfpci_hw_start(chip);
@@ -1615,7 +1633,7 @@
YMFPCI_DOUBLE("ADC Capture Volume", 0, YDSXGR_PRIADCLOOPVOL),
YMFPCI_DOUBLE("ADC Playback Volume", 1, YDSXGR_SECADCOUTVOL),
YMFPCI_DOUBLE("ADC Capture Volume", 1, YDSXGR_SECADCLOOPVOL),
-YMFPCI_DOUBLE("FM Legacy Volume", 0, YDSXGR_LEGACYOUTVOL),
+YMFPCI_DOUBLE("FM Legacy Playback Volume", 0, YDSXGR_LEGACYOUTVOL),
YMFPCI_DOUBLE(SNDRV_CTL_NAME_IEC958("AC97 ", PLAYBACK,VOLUME), 0, YDSXGR_ZVOUTVOL),
YMFPCI_DOUBLE(SNDRV_CTL_NAME_IEC958("", CAPTURE,VOLUME), 0, YDSXGR_ZVLOOPVOL),
YMFPCI_DOUBLE(SNDRV_CTL_NAME_IEC958("AC97 ",PLAYBACK,VOLUME), 1, YDSXGR_SPDIFOUTVOL),
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 8f064c7..4080bec 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -82,7 +82,6 @@
static int keywest_remove(struct i2c_client *client)
{
- i2c_set_clientdata(client, NULL);
if (! keywest_ctx)
return 0;
if (client == keywest_ctx->client)
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index bc823a5..775bd95 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -845,7 +845,7 @@
return ret;
}
- ret = request_irq(the_card.irq_no, snd_ps3_interrupt, IRQF_DISABLED,
+ ret = request_irq(the_card.irq_no, snd_ps3_interrupt, 0,
SND_PS3_DRIVER_NAME, &the_card);
if (ret) {
pr_info("%s: request_irq failed (%d)\n", __func__, ret);
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 8224db5..1381db8 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -7,6 +7,8 @@
select SND_PCM
select AC97_BUS if SND_SOC_AC97_BUS
select SND_JACK if INPUT=y || INPUT=SND
+ select REGMAP_I2C if I2C
+ select REGMAP_SPI if SPI_MASTER
---help---
If you want ASoC support, you should say Y here and also to the
@@ -51,6 +53,7 @@
source "sound/soc/omap/Kconfig"
source "sound/soc/kirkwood/Kconfig"
source "sound/soc/mid-x86/Kconfig"
+source "sound/soc/mxs/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/samsung/Kconfig"
source "sound/soc/s6000/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 4f91387..9ea8ac82 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_SND_SOC) += imx/
obj-$(CONFIG_SND_SOC) += jz4740/
obj-$(CONFIG_SND_SOC) += mid-x86/
+obj-$(CONFIG_SND_SOC) += mxs/
obj-$(CONFIG_SND_SOC) += nuc900/
obj-$(CONFIG_SND_SOC) += omap/
obj-$(CONFIG_SND_SOC) += kirkwood/
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
index 1aac2f4..73ae99a 100644
--- a/sound/soc/atmel/playpaq_wm8510.c
+++ b/sound/soc/atmel/playpaq_wm8510.c
@@ -338,7 +338,6 @@
/* always connected pins */
snd_soc_dapm_enable_pin(dapm, "Int Mic");
snd_soc_dapm_enable_pin(dapm, "Ext Spk");
- snd_soc_dapm_sync(dapm);
@@ -383,14 +382,17 @@
_gclk0 = clk_get(NULL, "gclk0");
if (IS_ERR(_gclk0)) {
_gclk0 = NULL;
+ ret = PTR_ERR(_gclk0);
goto err_gclk0;
}
_pll0 = clk_get(NULL, "pll0");
if (IS_ERR(_pll0)) {
_pll0 = NULL;
+ ret = PTR_ERR(_pll0);
goto err_pll0;
}
- if (clk_set_parent(_gclk0, _pll0)) {
+ ret = clk_set_parent(_gclk0, _pll0);
+ if (ret) {
pr_warning("snd-soc-playpaq: "
"Failed to set PLL0 as parent for DAC clock\n");
goto err_set_clk;
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index bad3aa1..0377c54 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -173,8 +173,6 @@
/* always connected */
snd_soc_dapm_enable_pin(dapm, "Ext Spk");
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c
index 5e4d499..d427e92 100644
--- a/sound/soc/atmel/snd-soc-afeb9260.c
+++ b/sound/soc/atmel/snd-soc-afeb9260.c
@@ -117,8 +117,6 @@
snd_soc_dapm_enable_pin(dapm, "Line In");
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/au1x/Kconfig b/sound/soc/au1x/Kconfig
index 4b67140..6d59254 100644
--- a/sound/soc/au1x/Kconfig
+++ b/sound/soc/au1x/Kconfig
@@ -18,10 +18,38 @@
select SND_AC97_CODEC
select SND_SOC_AC97_BUS
+##
+## Au1000/1500/1100 DMA + AC97C/I2SC
+##
+config SND_SOC_AU1XAUDIO
+ tristate "SoC Audio for Au1000/Au1500/Au1100"
+ depends on MIPS_ALCHEMY
+ help
+ This is a driver set for the AC97 unit and the
+ old DMA controller as found on the Au1000/Au1500/Au1100 chips.
+
+config SND_SOC_AU1XAC97C
+ tristate
+ select AC97_BUS
+ select SND_AC97_CODEC
+ select SND_SOC_AC97_BUS
+
+config SND_SOC_AU1XI2SC
+ tristate
+
##
## Boards
##
+config SND_SOC_DB1000
+ tristate "DB1000 Audio support"
+ depends on SND_SOC_AU1XAUDIO
+ select SND_SOC_AU1XAC97C
+ select SND_SOC_AC97_CODEC
+ help
+ Select this option to enable AC97 audio on the early DB1x00 series
+ of boards (DB1000/DB1500/DB1100).
+
config SND_SOC_DB1200
tristate "DB1200 AC97+I2S audio support"
depends on SND_SOC_AU1XPSC
diff --git a/sound/soc/au1x/Makefile b/sound/soc/au1x/Makefile
index 1687307..9207105 100644
--- a/sound/soc/au1x/Makefile
+++ b/sound/soc/au1x/Makefile
@@ -3,11 +3,21 @@
snd-soc-au1xpsc-i2s-objs := psc-i2s.o
snd-soc-au1xpsc-ac97-objs := psc-ac97.o
+# Au1000/1500/1100 Audio units
+snd-soc-au1x-dma-objs := dma.o
+snd-soc-au1x-ac97c-objs := ac97c.o
+snd-soc-au1x-i2sc-objs := i2sc.o
+
obj-$(CONFIG_SND_SOC_AU1XPSC) += snd-soc-au1xpsc-dbdma.o
obj-$(CONFIG_SND_SOC_AU1XPSC_I2S) += snd-soc-au1xpsc-i2s.o
obj-$(CONFIG_SND_SOC_AU1XPSC_AC97) += snd-soc-au1xpsc-ac97.o
+obj-$(CONFIG_SND_SOC_AU1XAUDIO) += snd-soc-au1x-dma.o
+obj-$(CONFIG_SND_SOC_AU1XAC97C) += snd-soc-au1x-ac97c.o
+obj-$(CONFIG_SND_SOC_AU1XI2SC) += snd-soc-au1x-i2sc.o
# Boards
+snd-soc-db1000-objs := db1000.o
snd-soc-db1200-objs := db1200.o
+obj-$(CONFIG_SND_SOC_DB1000) += snd-soc-db1000.o
obj-$(CONFIG_SND_SOC_DB1200) += snd-soc-db1200.o
diff --git a/sound/soc/au1x/ac97c.c b/sound/soc/au1x/ac97c.c
new file mode 100644
index 0000000..726bd65
--- /dev/null
+++ b/sound/soc/au1x/ac97c.c
@@ -0,0 +1,366 @@
+/*
+ * Au1000/Au1500/Au1100 AC97C controller driver for ASoC
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ *
+ * based on the old ALSA driver originally written by
+ * Charles Eidsness <charles@cooper-street.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#include "psc.h"
+
+/* register offsets and bits */
+#define AC97_CONFIG 0x00
+#define AC97_STATUS 0x04
+#define AC97_DATA 0x08
+#define AC97_CMDRESP 0x0c
+#define AC97_ENABLE 0x10
+
+#define CFG_RC(x) (((x) & 0x3ff) << 13) /* valid rx slots mask */
+#define CFG_XS(x) (((x) & 0x3ff) << 3) /* valid tx slots mask */
+#define CFG_SG (1 << 2) /* sync gate */
+#define CFG_SN (1 << 1) /* sync control */
+#define CFG_RS (1 << 0) /* acrst# control */
+#define STAT_XU (1 << 11) /* tx underflow */
+#define STAT_XO (1 << 10) /* tx overflow */
+#define STAT_RU (1 << 9) /* rx underflow */
+#define STAT_RO (1 << 8) /* rx overflow */
+#define STAT_RD (1 << 7) /* codec ready */
+#define STAT_CP (1 << 6) /* command pending */
+#define STAT_TE (1 << 4) /* tx fifo empty */
+#define STAT_TF (1 << 3) /* tx fifo full */
+#define STAT_RE (1 << 1) /* rx fifo empty */
+#define STAT_RF (1 << 0) /* rx fifo full */
+#define CMD_SET_DATA(x) (((x) & 0xffff) << 16)
+#define CMD_GET_DATA(x) ((x) & 0xffff)
+#define CMD_READ (1 << 7)
+#define CMD_WRITE (0 << 7)
+#define CMD_IDX(x) ((x) & 0x7f)
+#define EN_D (1 << 1) /* DISable bit */
+#define EN_CE (1 << 0) /* clock enable bit */
+
+/* how often to retry failed codec register reads/writes */
+#define AC97_RW_RETRIES 5
+
+#define AC97_RATES \
+ SNDRV_PCM_RATE_CONTINUOUS
+
+#define AC97_FMTS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE)
+
+/* instance data. There can be only one, MacLeod!!!!, fortunately there IS only
+ * once AC97C on early Alchemy chips. The newer ones aren't so lucky.
+ */
+static struct au1xpsc_audio_data *ac97c_workdata;
+#define ac97_to_ctx(x) ac97c_workdata
+
+static inline unsigned long RD(struct au1xpsc_audio_data *ctx, int reg)
+{
+ return __raw_readl(ctx->mmio + reg);
+}
+
+static inline void WR(struct au1xpsc_audio_data *ctx, int reg, unsigned long v)
+{
+ __raw_writel(v, ctx->mmio + reg);
+ wmb();
+}
+
+static unsigned short au1xac97c_ac97_read(struct snd_ac97 *ac97,
+ unsigned short r)
+{
+ struct au1xpsc_audio_data *ctx = ac97_to_ctx(ac97);
+ unsigned int tmo, retry;
+ unsigned long data;
+
+ data = ~0;
+ retry = AC97_RW_RETRIES;
+ do {
+ mutex_lock(&ctx->lock);
+
+ tmo = 5;
+ while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--)
+ udelay(21); /* wait an ac97 frame time */
+ if (!tmo) {
+ pr_debug("ac97rd timeout #1\n");
+ goto next;
+ }
+
+ WR(ctx, AC97_CMDRESP, CMD_IDX(r) | CMD_READ);
+
+ /* stupid errata: data is only valid for 21us, so
+ * poll, Forrest, poll...
+ */
+ tmo = 0x10000;
+ while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--)
+ asm volatile ("nop");
+ data = RD(ctx, AC97_CMDRESP);
+
+ if (!tmo)
+ pr_debug("ac97rd timeout #2\n");
+
+next:
+ mutex_unlock(&ctx->lock);
+ } while (--retry && !tmo);
+
+ pr_debug("AC97RD %04x %04lx %d\n", r, data, retry);
+
+ return retry ? data & 0xffff : 0xffff;
+}
+
+static void au1xac97c_ac97_write(struct snd_ac97 *ac97, unsigned short r,
+ unsigned short v)
+{
+ struct au1xpsc_audio_data *ctx = ac97_to_ctx(ac97);
+ unsigned int tmo, retry;
+
+ retry = AC97_RW_RETRIES;
+ do {
+ mutex_lock(&ctx->lock);
+
+ for (tmo = 5; (RD(ctx, AC97_STATUS) & STAT_CP) && tmo; tmo--)
+ udelay(21);
+ if (!tmo) {
+ pr_debug("ac97wr timeout #1\n");
+ goto next;
+ }
+
+ WR(ctx, AC97_CMDRESP, CMD_WRITE | CMD_IDX(r) | CMD_SET_DATA(v));
+
+ for (tmo = 10; (RD(ctx, AC97_STATUS) & STAT_CP) && tmo; tmo--)
+ udelay(21);
+ if (!tmo)
+ pr_debug("ac97wr timeout #2\n");
+next:
+ mutex_unlock(&ctx->lock);
+ } while (--retry && !tmo);
+
+ pr_debug("AC97WR %04x %04x %d\n", r, v, retry);
+}
+
+static void au1xac97c_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct au1xpsc_audio_data *ctx = ac97_to_ctx(ac97);
+
+ WR(ctx, AC97_CONFIG, ctx->cfg | CFG_SG | CFG_SN);
+ msleep(20);
+ WR(ctx, AC97_CONFIG, ctx->cfg | CFG_SG);
+ WR(ctx, AC97_CONFIG, ctx->cfg);
+}
+
+static void au1xac97c_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+ struct au1xpsc_audio_data *ctx = ac97_to_ctx(ac97);
+ int i;
+
+ WR(ctx, AC97_CONFIG, ctx->cfg | CFG_RS);
+ msleep(500);
+ WR(ctx, AC97_CONFIG, ctx->cfg);
+
+ /* wait for codec ready */
+ i = 50;
+ while (((RD(ctx, AC97_STATUS) & STAT_RD) == 0) && --i)
+ msleep(20);
+ if (!i)
+ printk(KERN_ERR "ac97c: codec not ready after cold reset\n");
+}
+
+/* AC97 controller operations */
+struct snd_ac97_bus_ops soc_ac97_ops = {
+ .read = au1xac97c_ac97_read,
+ .write = au1xac97c_ac97_write,
+ .reset = au1xac97c_ac97_cold_reset,
+ .warm_reset = au1xac97c_ac97_warm_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops); /* globals be gone! */
+
+static int alchemy_ac97c_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct au1xpsc_audio_data *ctx = snd_soc_dai_get_drvdata(dai);
+ snd_soc_dai_set_dma_data(dai, substream, &ctx->dmaids[0]);
+ return 0;
+}
+
+static struct snd_soc_dai_ops alchemy_ac97c_ops = {
+ .startup = alchemy_ac97c_startup,
+};
+
+static int au1xac97c_dai_probe(struct snd_soc_dai *dai)
+{
+ return ac97c_workdata ? 0 : -ENODEV;
+}
+
+static struct snd_soc_dai_driver au1xac97c_dai_driver = {
+ .name = "alchemy-ac97c",
+ .ac97_control = 1,
+ .probe = au1xac97c_dai_probe,
+ .playback = {
+ .rates = AC97_RATES,
+ .formats = AC97_FMTS,
+ .channels_min = 2,
+ .channels_max = 2,
+ },
+ .capture = {
+ .rates = AC97_RATES,
+ .formats = AC97_FMTS,
+ .channels_min = 2,
+ .channels_max = 2,
+ },
+ .ops = &alchemy_ac97c_ops,
+};
+
+static int __devinit au1xac97c_drvprobe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *iores, *dmares;
+ struct au1xpsc_audio_data *ctx;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ mutex_init(&ctx->lock);
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ ret = -ENODEV;
+ goto out0;
+ }
+
+ ret = -EBUSY;
+ if (!request_mem_region(iores->start, resource_size(iores),
+ pdev->name))
+ goto out0;
+
+ ctx->mmio = ioremap_nocache(iores->start, resource_size(iores));
+ if (!ctx->mmio)
+ goto out1;
+
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmares)
+ goto out2;
+ ctx->dmaids[SNDRV_PCM_STREAM_PLAYBACK] = dmares->start;
+
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!dmares)
+ goto out2;
+ ctx->dmaids[SNDRV_PCM_STREAM_CAPTURE] = dmares->start;
+
+ /* switch it on */
+ WR(ctx, AC97_ENABLE, EN_D | EN_CE);
+ WR(ctx, AC97_ENABLE, EN_CE);
+
+ ctx->cfg = CFG_RC(3) | CFG_XS(3);
+ WR(ctx, AC97_CONFIG, ctx->cfg);
+
+ platform_set_drvdata(pdev, ctx);
+
+ ret = snd_soc_register_dai(&pdev->dev, &au1xac97c_dai_driver);
+ if (ret)
+ goto out2;
+
+ ac97c_workdata = ctx;
+ return 0;
+
+out2:
+ iounmap(ctx->mmio);
+out1:
+ release_mem_region(iores->start, resource_size(iores));
+out0:
+ kfree(ctx);
+ return ret;
+}
+
+static int __devexit au1xac97c_drvremove(struct platform_device *pdev)
+{
+ struct au1xpsc_audio_data *ctx = platform_get_drvdata(pdev);
+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ snd_soc_unregister_dai(&pdev->dev);
+
+ WR(ctx, AC97_ENABLE, EN_D); /* clock off, disable */
+
+ iounmap(ctx->mmio);
+ release_mem_region(r->start, resource_size(r));
+ kfree(ctx);
+
+ ac97c_workdata = NULL; /* MDEV */
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int au1xac97c_drvsuspend(struct device *dev)
+{
+ struct au1xpsc_audio_data *ctx = dev_get_drvdata(dev);
+
+ WR(ctx, AC97_ENABLE, EN_D); /* clock off, disable */
+
+ return 0;
+}
+
+static int au1xac97c_drvresume(struct device *dev)
+{
+ struct au1xpsc_audio_data *ctx = dev_get_drvdata(dev);
+
+ WR(ctx, AC97_ENABLE, EN_D | EN_CE);
+ WR(ctx, AC97_ENABLE, EN_CE);
+ WR(ctx, AC97_CONFIG, ctx->cfg);
+
+ return 0;
+}
+
+static const struct dev_pm_ops au1xpscac97_pmops = {
+ .suspend = au1xac97c_drvsuspend,
+ .resume = au1xac97c_drvresume,
+};
+
+#define AU1XPSCAC97_PMOPS (&au1xpscac97_pmops)
+
+#else
+
+#define AU1XPSCAC97_PMOPS NULL
+
+#endif
+
+static struct platform_driver au1xac97c_driver = {
+ .driver = {
+ .name = "alchemy-ac97c",
+ .owner = THIS_MODULE,
+ .pm = AU1XPSCAC97_PMOPS,
+ },
+ .probe = au1xac97c_drvprobe,
+ .remove = __devexit_p(au1xac97c_drvremove),
+};
+
+static int __init au1xac97c_load(void)
+{
+ ac97c_workdata = NULL;
+ return platform_driver_register(&au1xac97c_driver);
+}
+
+static void __exit au1xac97c_unload(void)
+{
+ platform_driver_unregister(&au1xac97c_driver);
+}
+
+module_init(au1xac97c_load);
+module_exit(au1xac97c_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Au1000/1500/1100 AC97C ASoC driver");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/sound/soc/au1x/db1000.c b/sound/soc/au1x/db1000.c
new file mode 100644
index 0000000..127477a
--- /dev/null
+++ b/sound/soc/au1x/db1000.c
@@ -0,0 +1,75 @@
+/*
+ * DB1000/DB1500/DB1100 ASoC audio fabric support code.
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "psc.h"
+
+static struct snd_soc_dai_link db1000_ac97_dai = {
+ .name = "AC97",
+ .stream_name = "AC97 HiFi",
+ .codec_dai_name = "ac97-hifi",
+ .cpu_dai_name = "alchemy-ac97c",
+ .platform_name = "alchemy-pcm-dma.0",
+ .codec_name = "ac97-codec",
+};
+
+static struct snd_soc_card db1000_ac97 = {
+ .name = "DB1000_AC97",
+ .dai_link = &db1000_ac97_dai,
+ .num_links = 1,
+};
+
+static int __devinit db1000_audio_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &db1000_ac97;
+ card->dev = &pdev->dev;
+ return snd_soc_register_card(card);
+}
+
+static int __devexit db1000_audio_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ snd_soc_unregister_card(card);
+ return 0;
+}
+
+static struct platform_driver db1000_audio_driver = {
+ .driver = {
+ .name = "db1000-audio",
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = db1000_audio_probe,
+ .remove = __devexit_p(db1000_audio_remove),
+};
+
+static int __init db1000_audio_load(void)
+{
+ return platform_driver_register(&db1000_audio_driver);
+}
+
+static void __exit db1000_audio_unload(void)
+{
+ platform_driver_unregister(&db1000_audio_driver);
+}
+
+module_init(db1000_audio_load);
+module_exit(db1000_audio_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DB1000/DB1500/DB1100 ASoC audio");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/sound/soc/au1x/db1200.c b/sound/soc/au1x/db1200.c
index 1d3e258..289312c 100644
--- a/sound/soc/au1x/db1200.c
+++ b/sound/soc/au1x/db1200.c
@@ -1,7 +1,7 @@
/*
* DB1200 ASoC audio fabric support code.
*
- * (c) 2008-9 Manuel Lauss <manuel.lauss@gmail.com>
+ * (c) 2008-2011 Manuel Lauss <manuel.lauss@googlemail.com>
*
*/
@@ -21,6 +21,17 @@
#include "../codecs/wm8731.h"
#include "psc.h"
+static struct platform_device_id db1200_pids[] = {
+ {
+ .name = "db1200-ac97",
+ .driver_data = 0,
+ }, {
+ .name = "db1200-i2s",
+ .driver_data = 1,
+ },
+ {},
+};
+
/*------------------------- AC97 PART ---------------------------*/
static struct snd_soc_dai_link db1200_ac97_dai = {
@@ -89,36 +100,47 @@
/*------------------------- COMMON PART ---------------------------*/
-static struct platform_device *db1200_asoc_dev;
+static struct snd_soc_card *db1200_cards[] __devinitdata = {
+ &db1200_ac97_machine,
+ &db1200_i2s_machine,
+};
+
+static int __devinit db1200_audio_probe(struct platform_device *pdev)
+{
+ const struct platform_device_id *pid = platform_get_device_id(pdev);
+ struct snd_soc_card *card;
+
+ card = db1200_cards[pid->driver_data];
+ card->dev = &pdev->dev;
+ return snd_soc_register_card(card);
+}
+
+static int __devexit db1200_audio_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ snd_soc_unregister_card(card);
+ return 0;
+}
+
+static struct platform_driver db1200_audio_driver = {
+ .driver = {
+ .name = "db1200-ac97",
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ },
+ .id_table = db1200_pids,
+ .probe = db1200_audio_probe,
+ .remove = __devexit_p(db1200_audio_remove),
+};
static int __init db1200_audio_load(void)
{
- int ret;
-
- ret = -ENOMEM;
- db1200_asoc_dev = platform_device_alloc("soc-audio", 1); /* PSC1 */
- if (!db1200_asoc_dev)
- goto out;
-
- /* DB1200 board setup set PSC1MUX to preferred audio device */
- if (bcsr_read(BCSR_RESETS) & BCSR_RESETS_PSC1MUX)
- platform_set_drvdata(db1200_asoc_dev, &db1200_i2s_machine);
- else
- platform_set_drvdata(db1200_asoc_dev, &db1200_ac97_machine);
-
- ret = platform_device_add(db1200_asoc_dev);
-
- if (ret) {
- platform_device_put(db1200_asoc_dev);
- db1200_asoc_dev = NULL;
- }
-out:
- return ret;
+ return platform_driver_register(&db1200_audio_driver);
}
static void __exit db1200_audio_unload(void)
{
- platform_device_unregister(db1200_asoc_dev);
+ platform_driver_unregister(&db1200_audio_driver);
}
module_init(db1200_audio_load);
diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c
index 20bb53a..d7d04e2 100644
--- a/sound/soc/au1x/dbdma2.c
+++ b/sound/soc/au1x/dbdma2.c
@@ -169,7 +169,7 @@
au1x_pcm_dbdma_free(pcd);
- if (stype == PCM_RX)
+ if (stype == SNDRV_PCM_STREAM_CAPTURE)
pcd->ddma_chan = au1xxx_dbdma_chan_alloc(pcd->ddma_id,
DSCR_CMD0_ALWAYS,
au1x_pcm_dmarx_cb, (void *)pcd);
@@ -198,7 +198,7 @@
struct snd_soc_pcm_runtime *rtd = ss->private_data;
struct au1xpsc_audio_dmadata *pcd =
snd_soc_platform_get_drvdata(rtd->platform);
- return &pcd[SUBSTREAM_TYPE(ss)];
+ return &pcd[ss->stream];
}
static int au1xpsc_pcm_hw_params(struct snd_pcm_substream *substream,
@@ -212,7 +212,7 @@
if (ret < 0)
goto out;
- stype = SUBSTREAM_TYPE(substream);
+ stype = substream->stream;
pcd = to_dmadata(substream);
DBG("runtime->dma_area = 0x%08lx dma_addr_t = 0x%08lx dma_size = %d "
@@ -255,7 +255,7 @@
au1xxx_dbdma_reset(pcd->ddma_chan);
- if (SUBSTREAM_TYPE(substream) == PCM_RX) {
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
au1x_pcm_queue_rx(pcd);
au1x_pcm_queue_rx(pcd);
} else {
@@ -293,6 +293,16 @@
static int au1xpsc_pcm_open(struct snd_pcm_substream *substream)
{
+ struct au1xpsc_audio_dmadata *pcd = to_dmadata(substream);
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int stype = substream->stream, *dmaids;
+
+ dmaids = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+ if (!dmaids)
+ return -ENODEV; /* whoa, has ordering changed? */
+
+ pcd->ddma_id = dmaids[stype];
+
snd_soc_set_runtime_hwparams(substream, &au1xpsc_pcm_hardware);
return 0;
}
@@ -340,36 +350,18 @@
static int __devinit au1xpsc_pcm_drvprobe(struct platform_device *pdev)
{
struct au1xpsc_audio_dmadata *dmadata;
- struct resource *r;
int ret;
dmadata = kzalloc(2 * sizeof(struct au1xpsc_audio_dmadata), GFP_KERNEL);
if (!dmadata)
return -ENOMEM;
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!r) {
- ret = -ENODEV;
- goto out1;
- }
- dmadata[PCM_TX].ddma_id = r->start;
-
- /* RX DMA */
- r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (!r) {
- ret = -ENODEV;
- goto out1;
- }
- dmadata[PCM_RX].ddma_id = r->start;
-
platform_set_drvdata(pdev, dmadata);
ret = snd_soc_register_platform(&pdev->dev, &au1xpsc_soc_platform);
- if (!ret)
- return ret;
+ if (ret)
+ kfree(dmadata);
-out1:
- kfree(dmadata);
return ret;
}
@@ -405,57 +397,6 @@
module_init(au1xpsc_audio_dbdma_load);
module_exit(au1xpsc_audio_dbdma_unload);
-
-struct platform_device *au1xpsc_pcm_add(struct platform_device *pdev)
-{
- struct resource *res, *r;
- struct platform_device *pd;
- int id[2];
- int ret;
-
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!r)
- return NULL;
- id[0] = r->start;
-
- r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (!r)
- return NULL;
- id[1] = r->start;
-
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
- if (!res)
- return NULL;
-
- res[0].start = res[0].end = id[0];
- res[1].start = res[1].end = id[1];
- res[0].flags = res[1].flags = IORESOURCE_DMA;
-
- pd = platform_device_alloc("au1xpsc-pcm", pdev->id);
- if (!pd)
- goto out;
-
- pd->resource = res;
- pd->num_resources = 2;
-
- ret = platform_device_add(pd);
- if (!ret)
- return pd;
-
- platform_device_put(pd);
-out:
- kfree(res);
- return NULL;
-}
-EXPORT_SYMBOL_GPL(au1xpsc_pcm_add);
-
-void au1xpsc_pcm_destroy(struct platform_device *dmapd)
-{
- if (dmapd)
- platform_device_unregister(dmapd);
-}
-EXPORT_SYMBOL_GPL(au1xpsc_pcm_destroy);
-
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Au12x0/Au1550 PSC Audio DMA driver");
MODULE_AUTHOR("Manuel Lauss");
diff --git a/sound/soc/au1x/dma.c b/sound/soc/au1x/dma.c
new file mode 100644
index 0000000..177f713
--- /dev/null
+++ b/sound/soc/au1x/dma.c
@@ -0,0 +1,377 @@
+/*
+ * Au1000/Au1500/Au1100 Audio DMA support.
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ *
+ * copied almost verbatim from the old ALSA driver, written by
+ * Charles Eidsness <charles@cooper-street.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
+
+#include "psc.h"
+
+#define ALCHEMY_PCM_FMTS \
+ (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
+ SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | \
+ SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | \
+ SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE | \
+ SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_U32_BE | \
+ 0)
+
+struct pcm_period {
+ u32 start;
+ u32 relative_end; /* relative to start of buffer */
+ struct pcm_period *next;
+};
+
+struct audio_stream {
+ struct snd_pcm_substream *substream;
+ int dma;
+ struct pcm_period *buffer;
+ unsigned int period_size;
+ unsigned int periods;
+};
+
+struct alchemy_pcm_ctx {
+ struct audio_stream stream[2]; /* playback & capture */
+};
+
+static void au1000_release_dma_link(struct audio_stream *stream)
+{
+ struct pcm_period *pointer;
+ struct pcm_period *pointer_next;
+
+ stream->period_size = 0;
+ stream->periods = 0;
+ pointer = stream->buffer;
+ if (!pointer)
+ return;
+ do {
+ pointer_next = pointer->next;
+ kfree(pointer);
+ pointer = pointer_next;
+ } while (pointer != stream->buffer);
+ stream->buffer = NULL;
+}
+
+static int au1000_setup_dma_link(struct audio_stream *stream,
+ unsigned int period_bytes,
+ unsigned int periods)
+{
+ struct snd_pcm_substream *substream = stream->substream;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct pcm_period *pointer;
+ unsigned long dma_start;
+ int i;
+
+ dma_start = virt_to_phys(runtime->dma_area);
+
+ if (stream->period_size == period_bytes &&
+ stream->periods == periods)
+ return 0; /* not changed */
+
+ au1000_release_dma_link(stream);
+
+ stream->period_size = period_bytes;
+ stream->periods = periods;
+
+ stream->buffer = kmalloc(sizeof(struct pcm_period), GFP_KERNEL);
+ if (!stream->buffer)
+ return -ENOMEM;
+ pointer = stream->buffer;
+ for (i = 0; i < periods; i++) {
+ pointer->start = (u32)(dma_start + (i * period_bytes));
+ pointer->relative_end = (u32) (((i+1) * period_bytes) - 0x1);
+ if (i < periods - 1) {
+ pointer->next = kmalloc(sizeof(struct pcm_period),
+ GFP_KERNEL);
+ if (!pointer->next) {
+ au1000_release_dma_link(stream);
+ return -ENOMEM;
+ }
+ pointer = pointer->next;
+ }
+ }
+ pointer->next = stream->buffer;
+ return 0;
+}
+
+static void au1000_dma_stop(struct audio_stream *stream)
+{
+ if (stream->buffer)
+ disable_dma(stream->dma);
+}
+
+static void au1000_dma_start(struct audio_stream *stream)
+{
+ if (!stream->buffer)
+ return;
+
+ init_dma(stream->dma);
+ if (get_dma_active_buffer(stream->dma) == 0) {
+ clear_dma_done0(stream->dma);
+ set_dma_addr0(stream->dma, stream->buffer->start);
+ set_dma_count0(stream->dma, stream->period_size >> 1);
+ set_dma_addr1(stream->dma, stream->buffer->next->start);
+ set_dma_count1(stream->dma, stream->period_size >> 1);
+ } else {
+ clear_dma_done1(stream->dma);
+ set_dma_addr1(stream->dma, stream->buffer->start);
+ set_dma_count1(stream->dma, stream->period_size >> 1);
+ set_dma_addr0(stream->dma, stream->buffer->next->start);
+ set_dma_count0(stream->dma, stream->period_size >> 1);
+ }
+ enable_dma_buffers(stream->dma);
+ start_dma(stream->dma);
+}
+
+static irqreturn_t au1000_dma_interrupt(int irq, void *ptr)
+{
+ struct audio_stream *stream = (struct audio_stream *)ptr;
+ struct snd_pcm_substream *substream = stream->substream;
+
+ switch (get_dma_buffer_done(stream->dma)) {
+ case DMA_D0:
+ stream->buffer = stream->buffer->next;
+ clear_dma_done0(stream->dma);
+ set_dma_addr0(stream->dma, stream->buffer->next->start);
+ set_dma_count0(stream->dma, stream->period_size >> 1);
+ enable_dma_buffer0(stream->dma);
+ break;
+ case DMA_D1:
+ stream->buffer = stream->buffer->next;
+ clear_dma_done1(stream->dma);
+ set_dma_addr1(stream->dma, stream->buffer->next->start);
+ set_dma_count1(stream->dma, stream->period_size >> 1);
+ enable_dma_buffer1(stream->dma);
+ break;
+ case (DMA_D0 | DMA_D1):
+ pr_debug("DMA %d missed interrupt.\n", stream->dma);
+ au1000_dma_stop(stream);
+ au1000_dma_start(stream);
+ break;
+ case (~DMA_D0 & ~DMA_D1):
+ pr_debug("DMA %d empty irq.\n", stream->dma);
+ }
+ snd_pcm_period_elapsed(substream);
+ return IRQ_HANDLED;
+}
+
+static const struct snd_pcm_hardware alchemy_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
+ .formats = ALCHEMY_PCM_FMTS,
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .rate_min = SNDRV_PCM_RATE_8000,
+ .rate_max = SNDRV_PCM_RATE_192000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .period_bytes_min = 1024,
+ .period_bytes_max = 16 * 1024 - 1,
+ .periods_min = 4,
+ .periods_max = 255,
+ .buffer_bytes_max = 128 * 1024,
+ .fifo_size = 16,
+};
+
+static inline struct alchemy_pcm_ctx *ss_to_ctx(struct snd_pcm_substream *ss)
+{
+ struct snd_soc_pcm_runtime *rtd = ss->private_data;
+ return snd_soc_platform_get_drvdata(rtd->platform);
+}
+
+static inline struct audio_stream *ss_to_as(struct snd_pcm_substream *ss)
+{
+ struct alchemy_pcm_ctx *ctx = ss_to_ctx(ss);
+ return &(ctx->stream[ss->stream]);
+}
+
+static int alchemy_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct alchemy_pcm_ctx *ctx = ss_to_ctx(substream);
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int *dmaids, s = substream->stream;
+ char *name;
+
+ dmaids = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+ if (!dmaids)
+ return -ENODEV; /* whoa, has ordering changed? */
+
+ /* DMA setup */
+ name = (s == SNDRV_PCM_STREAM_PLAYBACK) ? "audio-tx" : "audio-rx";
+ ctx->stream[s].dma = request_au1000_dma(dmaids[s], name,
+ au1000_dma_interrupt, 0,
+ &ctx->stream[s]);
+ set_dma_mode(ctx->stream[s].dma,
+ get_dma_mode(ctx->stream[s].dma) & ~DMA_NC);
+
+ ctx->stream[s].substream = substream;
+ ctx->stream[s].buffer = NULL;
+ snd_soc_set_runtime_hwparams(substream, &alchemy_pcm_hardware);
+
+ return 0;
+}
+
+static int alchemy_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct alchemy_pcm_ctx *ctx = ss_to_ctx(substream);
+ int stype = substream->stream;
+
+ ctx->stream[stype].substream = NULL;
+ free_au1000_dma(ctx->stream[stype].dma);
+
+ return 0;
+}
+
+static int alchemy_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct audio_stream *stream = ss_to_as(substream);
+ int err;
+
+ err = snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
+ if (err < 0)
+ return err;
+ err = au1000_setup_dma_link(stream,
+ params_period_bytes(hw_params),
+ params_periods(hw_params));
+ if (err)
+ snd_pcm_lib_free_pages(substream);
+
+ return err;
+}
+
+static int alchemy_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct audio_stream *stream = ss_to_as(substream);
+ au1000_release_dma_link(stream);
+ return snd_pcm_lib_free_pages(substream);
+}
+
+static int alchemy_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct audio_stream *stream = ss_to_as(substream);
+ int err = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ au1000_dma_start(stream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ au1000_dma_stop(stream);
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+static snd_pcm_uframes_t alchemy_pcm_pointer(struct snd_pcm_substream *ss)
+{
+ struct audio_stream *stream = ss_to_as(ss);
+ long location;
+
+ location = get_dma_residue(stream->dma);
+ location = stream->buffer->relative_end - location;
+ if (location == -1)
+ location = 0;
+ return bytes_to_frames(ss->runtime, location);
+}
+
+static struct snd_pcm_ops alchemy_pcm_ops = {
+ .open = alchemy_pcm_open,
+ .close = alchemy_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = alchemy_pcm_hw_params,
+ .hw_free = alchemy_pcm_hw_free,
+ .trigger = alchemy_pcm_trigger,
+ .pointer = alchemy_pcm_pointer,
+};
+
+static void alchemy_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static int alchemy_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_pcm *pcm = rtd->pcm;
+
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL), 65536, (4096 * 1024) - 1);
+
+ return 0;
+}
+
+struct snd_soc_platform_driver alchemy_pcm_soc_platform = {
+ .ops = &alchemy_pcm_ops,
+ .pcm_new = alchemy_pcm_new,
+ .pcm_free = alchemy_pcm_free_dma_buffers,
+};
+
+static int __devinit alchemy_pcm_drvprobe(struct platform_device *pdev)
+{
+ struct alchemy_pcm_ctx *ctx;
+ int ret;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ctx);
+
+ ret = snd_soc_register_platform(&pdev->dev, &alchemy_pcm_soc_platform);
+ if (ret)
+ kfree(ctx);
+
+ return ret;
+}
+
+static int __devexit alchemy_pcm_drvremove(struct platform_device *pdev)
+{
+ struct alchemy_pcm_ctx *ctx = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_platform(&pdev->dev);
+ kfree(ctx);
+
+ return 0;
+}
+
+static struct platform_driver alchemy_pcmdma_driver = {
+ .driver = {
+ .name = "alchemy-pcm-dma",
+ .owner = THIS_MODULE,
+ },
+ .probe = alchemy_pcm_drvprobe,
+ .remove = __devexit_p(alchemy_pcm_drvremove),
+};
+
+static int __init alchemy_pcmdma_load(void)
+{
+ return platform_driver_register(&alchemy_pcmdma_driver);
+}
+
+static void __exit alchemy_pcmdma_unload(void)
+{
+ platform_driver_unregister(&alchemy_pcmdma_driver);
+}
+
+module_init(alchemy_pcmdma_load);
+module_exit(alchemy_pcmdma_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Au1000/Au1500/Au1100 Audio DMA driver");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/sound/soc/au1x/i2sc.c b/sound/soc/au1x/i2sc.c
new file mode 100644
index 0000000..6bcf48f
--- /dev/null
+++ b/sound/soc/au1x/i2sc.c
@@ -0,0 +1,349 @@
+/*
+ * Au1000/Au1500/Au1100 I2S controller driver for ASoC
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ *
+ * Note: clock supplied to the I2S controller must be 256x samplerate.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#include "psc.h"
+
+#define I2S_RXTX 0x00
+#define I2S_CFG 0x04
+#define I2S_ENABLE 0x08
+
+#define CFG_XU (1 << 25) /* tx underflow */
+#define CFG_XO (1 << 24)
+#define CFG_RU (1 << 23)
+#define CFG_RO (1 << 22)
+#define CFG_TR (1 << 21)
+#define CFG_TE (1 << 20)
+#define CFG_TF (1 << 19)
+#define CFG_RR (1 << 18)
+#define CFG_RF (1 << 17)
+#define CFG_ICK (1 << 12) /* clock invert */
+#define CFG_PD (1 << 11) /* set to make I2SDIO INPUT */
+#define CFG_LB (1 << 10) /* loopback */
+#define CFG_IC (1 << 9) /* word select invert */
+#define CFG_FM_I2S (0 << 7) /* I2S format */
+#define CFG_FM_LJ (1 << 7) /* left-justified */
+#define CFG_FM_RJ (2 << 7) /* right-justified */
+#define CFG_FM_MASK (3 << 7)
+#define CFG_TN (1 << 6) /* tx fifo en */
+#define CFG_RN (1 << 5) /* rx fifo en */
+#define CFG_SZ_8 (0x08)
+#define CFG_SZ_16 (0x10)
+#define CFG_SZ_18 (0x12)
+#define CFG_SZ_20 (0x14)
+#define CFG_SZ_24 (0x18)
+#define CFG_SZ_MASK (0x1f)
+#define EN_D (1 << 1) /* DISable */
+#define EN_CE (1 << 0) /* clock enable */
+
+/* only limited by clock generator and board design */
+#define AU1XI2SC_RATES \
+ SNDRV_PCM_RATE_CONTINUOUS
+
+#define AU1XI2SC_FMTS \
+ (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
+ SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | \
+ SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | \
+ SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_U18_3LE | \
+ SNDRV_PCM_FMTBIT_S18_3BE | SNDRV_PCM_FMTBIT_U18_3BE | \
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
+ SNDRV_PCM_FMTBIT_S20_3BE | SNDRV_PCM_FMTBIT_U20_3BE | \
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE | \
+ SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE | \
+ 0)
+
+static inline unsigned long RD(struct au1xpsc_audio_data *ctx, int reg)
+{
+ return __raw_readl(ctx->mmio + reg);
+}
+
+static inline void WR(struct au1xpsc_audio_data *ctx, int reg, unsigned long v)
+{
+ __raw_writel(v, ctx->mmio + reg);
+ wmb();
+}
+
+static int au1xi2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
+{
+ struct au1xpsc_audio_data *ctx = snd_soc_dai_get_drvdata(cpu_dai);
+ unsigned long c;
+ int ret;
+
+ ret = -EINVAL;
+ c = ctx->cfg;
+
+ c &= ~CFG_FM_MASK;
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ c |= CFG_FM_I2S;
+ break;
+ case SND_SOC_DAIFMT_MSB:
+ c |= CFG_FM_RJ;
+ break;
+ case SND_SOC_DAIFMT_LSB:
+ c |= CFG_FM_LJ;
+ break;
+ default:
+ goto out;
+ }
+
+ c &= ~(CFG_IC | CFG_ICK); /* IB-IF */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ c |= CFG_IC | CFG_ICK;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ c |= CFG_IC;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ c |= CFG_ICK;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ break;
+ default:
+ goto out;
+ }
+
+ /* I2S controller only supports master */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS: /* CODEC slave */
+ break;
+ default:
+ goto out;
+ }
+
+ ret = 0;
+ ctx->cfg = c;
+out:
+ return ret;
+}
+
+static int au1xi2s_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *dai)
+{
+ struct au1xpsc_audio_data *ctx = snd_soc_dai_get_drvdata(dai);
+ int stype = SUBSTREAM_TYPE(substream);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ /* power up */
+ WR(ctx, I2S_ENABLE, EN_D | EN_CE);
+ WR(ctx, I2S_ENABLE, EN_CE);
+ ctx->cfg |= (stype == PCM_TX) ? CFG_TN : CFG_RN;
+ WR(ctx, I2S_CFG, ctx->cfg);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ ctx->cfg &= ~((stype == PCM_TX) ? CFG_TN : CFG_RN);
+ WR(ctx, I2S_CFG, ctx->cfg);
+ WR(ctx, I2S_ENABLE, EN_D); /* power off */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long msbits_to_reg(int msbits)
+{
+ switch (msbits) {
+ case 8:
+ return CFG_SZ_8;
+ case 16:
+ return CFG_SZ_16;
+ case 18:
+ return CFG_SZ_18;
+ case 20:
+ return CFG_SZ_20;
+ case 24:
+ return CFG_SZ_24;
+ }
+ return 0;
+}
+
+static int au1xi2s_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct au1xpsc_audio_data *ctx = snd_soc_dai_get_drvdata(dai);
+ unsigned long v;
+
+ v = msbits_to_reg(params->msbits);
+ if (!v)
+ return -EINVAL;
+
+ ctx->cfg &= ~CFG_SZ_MASK;
+ ctx->cfg |= v;
+ return 0;
+}
+
+static int au1xi2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct au1xpsc_audio_data *ctx = snd_soc_dai_get_drvdata(dai);
+ snd_soc_dai_set_dma_data(dai, substream, &ctx->dmaids[0]);
+ return 0;
+}
+
+static const struct snd_soc_dai_ops au1xi2s_dai_ops = {
+ .startup = au1xi2s_startup,
+ .trigger = au1xi2s_trigger,
+ .hw_params = au1xi2s_hw_params,
+ .set_fmt = au1xi2s_set_fmt,
+};
+
+static struct snd_soc_dai_driver au1xi2s_dai_driver = {
+ .symmetric_rates = 1,
+ .playback = {
+ .rates = AU1XI2SC_RATES,
+ .formats = AU1XI2SC_FMTS,
+ .channels_min = 2,
+ .channels_max = 2,
+ },
+ .capture = {
+ .rates = AU1XI2SC_RATES,
+ .formats = AU1XI2SC_FMTS,
+ .channels_min = 2,
+ .channels_max = 2,
+ },
+ .ops = &au1xi2s_dai_ops,
+};
+
+static int __devinit au1xi2s_drvprobe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *iores, *dmares;
+ struct au1xpsc_audio_data *ctx;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ ret = -ENODEV;
+ goto out0;
+ }
+
+ ret = -EBUSY;
+ if (!request_mem_region(iores->start, resource_size(iores),
+ pdev->name))
+ goto out0;
+
+ ctx->mmio = ioremap_nocache(iores->start, resource_size(iores));
+ if (!ctx->mmio)
+ goto out1;
+
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmares)
+ goto out2;
+ ctx->dmaids[SNDRV_PCM_STREAM_PLAYBACK] = dmares->start;
+
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!dmares)
+ goto out2;
+ ctx->dmaids[SNDRV_PCM_STREAM_CAPTURE] = dmares->start;
+
+ platform_set_drvdata(pdev, ctx);
+
+ ret = snd_soc_register_dai(&pdev->dev, &au1xi2s_dai_driver);
+ if (ret)
+ goto out2;
+
+ return 0;
+
+out2:
+ iounmap(ctx->mmio);
+out1:
+ release_mem_region(iores->start, resource_size(iores));
+out0:
+ kfree(ctx);
+ return ret;
+}
+
+static int __devexit au1xi2s_drvremove(struct platform_device *pdev)
+{
+ struct au1xpsc_audio_data *ctx = platform_get_drvdata(pdev);
+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ snd_soc_unregister_dai(&pdev->dev);
+
+ WR(ctx, I2S_ENABLE, EN_D); /* clock off, disable */
+
+ iounmap(ctx->mmio);
+ release_mem_region(r->start, resource_size(r));
+ kfree(ctx);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int au1xi2s_drvsuspend(struct device *dev)
+{
+ struct au1xpsc_audio_data *ctx = dev_get_drvdata(dev);
+
+ WR(ctx, I2S_ENABLE, EN_D); /* clock off, disable */
+
+ return 0;
+}
+
+static int au1xi2s_drvresume(struct device *dev)
+{
+ return 0;
+}
+
+static const struct dev_pm_ops au1xi2sc_pmops = {
+ .suspend = au1xi2s_drvsuspend,
+ .resume = au1xi2s_drvresume,
+};
+
+#define AU1XI2SC_PMOPS (&au1xi2sc_pmops)
+
+#else
+
+#define AU1XI2SC_PMOPS NULL
+
+#endif
+
+static struct platform_driver au1xi2s_driver = {
+ .driver = {
+ .name = "alchemy-i2sc",
+ .owner = THIS_MODULE,
+ .pm = AU1XI2SC_PMOPS,
+ },
+ .probe = au1xi2s_drvprobe,
+ .remove = __devexit_p(au1xi2s_drvremove),
+};
+
+static int __init au1xi2s_load(void)
+{
+ return platform_driver_register(&au1xi2s_driver);
+}
+
+static void __exit au1xi2s_unload(void)
+{
+ platform_driver_unregister(&au1xi2s_driver);
+}
+
+module_init(au1xi2s_load);
+module_exit(au1xi2s_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Au1000/1500/1100 I2S ASoC driver");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/sound/soc/au1x/psc-ac97.c b/sound/soc/au1x/psc-ac97.c
index d0db66f..0c6acd5 100644
--- a/sound/soc/au1x/psc-ac97.c
+++ b/sound/soc/au1x/psc-ac97.c
@@ -41,14 +41,14 @@
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3BE)
#define AC97PCR_START(stype) \
- ((stype) == PCM_TX ? PSC_AC97PCR_TS : PSC_AC97PCR_RS)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_AC97PCR_TS : PSC_AC97PCR_RS)
#define AC97PCR_STOP(stype) \
- ((stype) == PCM_TX ? PSC_AC97PCR_TP : PSC_AC97PCR_RP)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_AC97PCR_TP : PSC_AC97PCR_RP)
#define AC97PCR_CLRFIFO(stype) \
- ((stype) == PCM_TX ? PSC_AC97PCR_TC : PSC_AC97PCR_RC)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_AC97PCR_TC : PSC_AC97PCR_RC)
#define AC97STAT_BUSY(stype) \
- ((stype) == PCM_TX ? PSC_AC97STAT_TB : PSC_AC97STAT_RB)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_AC97STAT_TB : PSC_AC97STAT_RB)
/* instance data. There can be only one, MacLeod!!!! */
static struct au1xpsc_audio_data *au1xpsc_ac97_workdata;
@@ -215,7 +215,7 @@
{
struct au1xpsc_audio_data *pscdata = snd_soc_dai_get_drvdata(dai);
unsigned long r, ro, stat;
- int chans, t, stype = SUBSTREAM_TYPE(substream);
+ int chans, t, stype = substream->stream;
chans = params_channels(params);
@@ -235,7 +235,7 @@
r |= PSC_AC97CFG_SET_LEN(params->msbits);
/* channels: enable slots for front L/R channel */
- if (stype == PCM_TX) {
+ if (stype == SNDRV_PCM_STREAM_PLAYBACK) {
r &= ~PSC_AC97CFG_TXSLOT_MASK;
r |= PSC_AC97CFG_TXSLOT_ENA(3);
r |= PSC_AC97CFG_TXSLOT_ENA(4);
@@ -294,7 +294,7 @@
int cmd, struct snd_soc_dai *dai)
{
struct au1xpsc_audio_data *pscdata = snd_soc_dai_get_drvdata(dai);
- int ret, stype = SUBSTREAM_TYPE(substream);
+ int ret, stype = substream->stream;
ret = 0;
@@ -324,12 +324,21 @@
return ret;
}
+static int au1xpsc_ac97_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct au1xpsc_audio_data *pscdata = snd_soc_dai_get_drvdata(dai);
+ snd_soc_dai_set_dma_data(dai, substream, &pscdata->dmaids[0]);
+ return 0;
+}
+
static int au1xpsc_ac97_probe(struct snd_soc_dai *dai)
{
return au1xpsc_ac97_workdata ? 0 : -ENODEV;
}
static struct snd_soc_dai_ops au1xpsc_ac97_dai_ops = {
+ .startup = au1xpsc_ac97_startup,
.trigger = au1xpsc_ac97_trigger,
.hw_params = au1xpsc_ac97_hw_params,
};
@@ -355,7 +364,7 @@
static int __devinit au1xpsc_ac97_drvprobe(struct platform_device *pdev)
{
int ret;
- struct resource *r;
+ struct resource *iores, *dmares;
unsigned long sel;
struct au1xpsc_audio_data *wd;
@@ -365,20 +374,31 @@
mutex_init(&wd->lock);
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
ret = -ENODEV;
goto out0;
}
ret = -EBUSY;
- if (!request_mem_region(r->start, resource_size(r), pdev->name))
+ if (!request_mem_region(iores->start, resource_size(iores),
+ pdev->name))
goto out0;
- wd->mmio = ioremap(r->start, resource_size(r));
+ wd->mmio = ioremap(iores->start, resource_size(iores));
if (!wd->mmio)
goto out1;
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmares)
+ goto out2;
+ wd->dmaids[SNDRV_PCM_STREAM_PLAYBACK] = dmares->start;
+
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!dmares)
+ goto out2;
+ wd->dmaids[SNDRV_PCM_STREAM_CAPTURE] = dmares->start;
+
/* configuration: max dma trigger threshold, enable ac97 */
wd->cfg = PSC_AC97CFG_RT_FIFO8 | PSC_AC97CFG_TT_FIFO8 |
PSC_AC97CFG_DE_ENABLE;
@@ -401,17 +421,15 @@
ret = snd_soc_register_dai(&pdev->dev, &wd->dai_drv);
if (ret)
- goto out1;
+ goto out2;
- wd->dmapd = au1xpsc_pcm_add(pdev);
- if (wd->dmapd) {
- au1xpsc_ac97_workdata = wd;
- return 0;
- }
+ au1xpsc_ac97_workdata = wd;
+ return 0;
- snd_soc_unregister_dai(&pdev->dev);
+out2:
+ iounmap(wd->mmio);
out1:
- release_mem_region(r->start, resource_size(r));
+ release_mem_region(iores->start, resource_size(iores));
out0:
kfree(wd);
return ret;
@@ -422,9 +440,6 @@
struct au1xpsc_audio_data *wd = platform_get_drvdata(pdev);
struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (wd->dmapd)
- au1xpsc_pcm_destroy(wd->dmapd);
-
snd_soc_unregister_dai(&pdev->dev);
/* disable PSC completely */
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index fca0912..e03c5ce 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -42,13 +42,13 @@
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE)
#define I2SSTAT_BUSY(stype) \
- ((stype) == PCM_TX ? PSC_I2SSTAT_TB : PSC_I2SSTAT_RB)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_I2SSTAT_TB : PSC_I2SSTAT_RB)
#define I2SPCR_START(stype) \
- ((stype) == PCM_TX ? PSC_I2SPCR_TS : PSC_I2SPCR_RS)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_I2SPCR_TS : PSC_I2SPCR_RS)
#define I2SPCR_STOP(stype) \
- ((stype) == PCM_TX ? PSC_I2SPCR_TP : PSC_I2SPCR_RP)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_I2SPCR_TP : PSC_I2SPCR_RP)
#define I2SPCR_CLRFIFO(stype) \
- ((stype) == PCM_TX ? PSC_I2SPCR_TC : PSC_I2SPCR_RC)
+ ((stype) == SNDRV_PCM_STREAM_PLAYBACK ? PSC_I2SPCR_TC : PSC_I2SPCR_RC)
static int au1xpsc_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
@@ -240,7 +240,7 @@
struct snd_soc_dai *dai)
{
struct au1xpsc_audio_data *pscdata = snd_soc_dai_get_drvdata(dai);
- int ret, stype = SUBSTREAM_TYPE(substream);
+ int ret, stype = substream->stream;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
@@ -257,7 +257,16 @@
return ret;
}
+static int au1xpsc_i2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct au1xpsc_audio_data *pscdata = snd_soc_dai_get_drvdata(dai);
+ snd_soc_dai_set_dma_data(dai, substream, &pscdata->dmaids[0]);
+ return 0;
+}
+
static struct snd_soc_dai_ops au1xpsc_i2s_dai_ops = {
+ .startup = au1xpsc_i2s_startup,
.trigger = au1xpsc_i2s_trigger,
.hw_params = au1xpsc_i2s_hw_params,
.set_fmt = au1xpsc_i2s_set_fmt,
@@ -281,7 +290,7 @@
static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev)
{
- struct resource *r;
+ struct resource *iores, *dmares;
unsigned long sel;
int ret;
struct au1xpsc_audio_data *wd;
@@ -290,20 +299,31 @@
if (!wd)
return -ENOMEM;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
ret = -ENODEV;
goto out0;
}
ret = -EBUSY;
- if (!request_mem_region(r->start, resource_size(r), pdev->name))
+ if (!request_mem_region(iores->start, resource_size(iores),
+ pdev->name))
goto out0;
- wd->mmio = ioremap(r->start, resource_size(r));
+ wd->mmio = ioremap(iores->start, resource_size(iores));
if (!wd->mmio)
goto out1;
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmares)
+ goto out2;
+ wd->dmaids[SNDRV_PCM_STREAM_PLAYBACK] = dmares->start;
+
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!dmares)
+ goto out2;
+ wd->dmaids[SNDRV_PCM_STREAM_CAPTURE] = dmares->start;
+
/* preserve PSC clock source set up by platform (dev.platform_data
* is already occupied by soc layer)
*/
@@ -330,17 +350,13 @@
platform_set_drvdata(pdev, wd);
ret = snd_soc_register_dai(&pdev->dev, &wd->dai_drv);
- if (ret)
- goto out1;
-
- /* finally add the DMA device for this PSC */
- wd->dmapd = au1xpsc_pcm_add(pdev);
- if (wd->dmapd)
+ if (!ret)
return 0;
- snd_soc_unregister_dai(&pdev->dev);
+out2:
+ iounmap(wd->mmio);
out1:
- release_mem_region(r->start, resource_size(r));
+ release_mem_region(iores->start, resource_size(iores));
out0:
kfree(wd);
return ret;
@@ -351,9 +367,6 @@
struct au1xpsc_audio_data *wd = platform_get_drvdata(pdev);
struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (wd->dmapd)
- au1xpsc_pcm_destroy(wd->dmapd);
-
snd_soc_unregister_dai(&pdev->dev);
au_writel(0, I2S_CFG(wd));
diff --git a/sound/soc/au1x/psc.h b/sound/soc/au1x/psc.h
index b30eadd..b16b2e0 100644
--- a/sound/soc/au1x/psc.h
+++ b/sound/soc/au1x/psc.h
@@ -1,7 +1,7 @@
/*
- * Au12x0/Au1550 PSC ALSA ASoC audio support.
+ * Alchemy ALSA ASoC audio support.
*
- * (c) 2007-2008 MSC Vertriebsges.m.b.H.,
+ * (c) 2007-2011 MSC Vertriebsges.m.b.H.,
* Manuel Lauss <manuel.lauss@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -13,10 +13,6 @@
#ifndef _AU1X_PCM_H
#define _AU1X_PCM_H
-/* DBDMA helpers */
-extern struct platform_device *au1xpsc_pcm_add(struct platform_device *pdev);
-extern void au1xpsc_pcm_destroy(struct platform_device *dmapd);
-
struct au1xpsc_audio_data {
void __iomem *mmio;
@@ -27,15 +23,9 @@
unsigned long pm[2];
struct mutex lock;
- struct platform_device *dmapd;
+ int dmaids[2];
};
-#define PCM_TX 0
-#define PCM_RX 1
-
-#define SUBSTREAM_TYPE(substream) \
- ((substream)->stream == SNDRV_PCM_STREAM_PLAYBACK ? PCM_TX : PCM_RX)
-
/* easy access macros */
#define PSC_CTRL(x) ((unsigned long)((x)->mmio) + PSC_CTRL_OFFSET)
#define PSC_SEL(x) ((unsigned long)((x)->mmio) + PSC_SEL_OFFSET)
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index fe9d548..9f6bc55 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -27,6 +27,19 @@
board connected to one of the Blackfin evaluation boards like the
BF5XX-STAMP or BF5XX-EZKIT.
+config SND_SOC_BFIN_EVAL_ADAU1373
+ tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
+ depends on SND_BF5XX_I2S && I2C
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_ADAU1373
+ help
+ Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
+ board connected to one of the Blackfin evaluation boards like the
+ BF5XX-STAMP or BF5XX-EZKIT.
+
+ Note: This driver assumes that first ADAU1373 DAI is connected to the
+ first SPORT port on the BF5XX board.
+
config SND_SOC_BFIN_EVAL_ADAV80X
tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
diff --git a/sound/soc/blackfin/Makefile b/sound/soc/blackfin/Makefile
index 6018bf5..1bf86cc 100644
--- a/sound/soc/blackfin/Makefile
+++ b/sound/soc/blackfin/Makefile
@@ -21,6 +21,7 @@
snd-ssm2602-objs := bf5xx-ssm2602.o
snd-ad73311-objs := bf5xx-ad73311.o
snd-ad193x-objs := bf5xx-ad193x.o
+snd-soc-bfin-eval-adau1373-objs := bfin-eval-adau1373.o
snd-soc-bfin-eval-adau1701-objs := bfin-eval-adau1701.o
snd-soc-bfin-eval-adav80x-objs := bfin-eval-adav80x.o
@@ -29,5 +30,6 @@
obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o
obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o
obj-$(CONFIG_SND_BF5XX_SOC_AD193X) += snd-ad193x.o
+obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) += snd-soc-bfin-eval-adau1373.o
obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) += snd-soc-bfin-eval-adau1701.o
obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) += snd-soc-bfin-eval-adav80x.o
diff --git a/sound/soc/blackfin/bf5xx-ac97-pcm.c b/sound/soc/blackfin/bf5xx-ac97-pcm.c
index 9e59f68..56815c1 100644
--- a/sound/soc/blackfin/bf5xx-ac97-pcm.c
+++ b/sound/soc/blackfin/bf5xx-ac97-pcm.c
@@ -418,7 +418,7 @@
static u64 bf5xx_pcm_dmamask = DMA_BIT_MASK(32);
-int bf5xx_pcm_ac97_new(struct snd_soc_pcm_runtime *rtd)
+static int bf5xx_pcm_ac97_new(struct snd_soc_pcm_runtime *rtd)
{
struct snd_card *card = rtd->card->snd_card;
struct snd_soc_dai *dai = rtd->cpu_dai;
diff --git a/sound/soc/blackfin/bf5xx-i2s-pcm.c b/sound/soc/blackfin/bf5xx-i2s-pcm.c
index 61ddf94..7565e15 100644
--- a/sound/soc/blackfin/bf5xx-i2s-pcm.c
+++ b/sound/soc/blackfin/bf5xx-i2s-pcm.c
@@ -257,7 +257,7 @@
static u64 bf5xx_pcm_dmamask = DMA_BIT_MASK(32);
-int bf5xx_pcm_i2s_new(struct snd_soc_pcm_runtime *rtd)
+static int bf5xx_pcm_i2s_new(struct snd_soc_pcm_runtime *rtd)
{
struct snd_card *card = rtd->card->snd_card;
struct snd_soc_dai *dai = rtd->cpu_dai;
diff --git a/sound/soc/blackfin/bfin-eval-adau1373.c b/sound/soc/blackfin/bfin-eval-adau1373.c
new file mode 100644
index 0000000..8df2a3b
--- /dev/null
+++ b/sound/soc/blackfin/bfin-eval-adau1373.c
@@ -0,0 +1,202 @@
+/*
+ * Machine driver for EVAL-ADAU1373 on Analog Devices bfin
+ * evaluation boards.
+ *
+ * Copyright 2011 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include "../codecs/adau1373.h"
+
+static const struct snd_soc_dapm_widget bfin_eval_adau1373_dapm_widgets[] = {
+ SND_SOC_DAPM_LINE("Line In1", NULL),
+ SND_SOC_DAPM_LINE("Line In2", NULL),
+ SND_SOC_DAPM_LINE("Line In3", NULL),
+ SND_SOC_DAPM_LINE("Line In4", NULL),
+
+ SND_SOC_DAPM_LINE("Line Out1", NULL),
+ SND_SOC_DAPM_LINE("Line Out2", NULL),
+ SND_SOC_DAPM_LINE("Stereo Out", NULL),
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_HP("Earpiece", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+static const struct snd_soc_dapm_route bfin_eval_adau1373_dapm_routes[] = {
+ { "AIN1L", NULL, "Line In1" },
+ { "AIN1R", NULL, "Line In1" },
+ { "AIN2L", NULL, "Line In2" },
+ { "AIN2R", NULL, "Line In2" },
+ { "AIN3L", NULL, "Line In3" },
+ { "AIN3R", NULL, "Line In3" },
+ { "AIN4L", NULL, "Line In4" },
+ { "AIN4R", NULL, "Line In4" },
+
+ /* MICBIAS can be connected via a jumper to the line-in jack, since w
+ don't know which one is going to be used, just power both. */
+ { "Line In1", NULL, "MICBIAS1" },
+ { "Line In2", NULL, "MICBIAS1" },
+ { "Line In3", NULL, "MICBIAS1" },
+ { "Line In4", NULL, "MICBIAS1" },
+ { "Line In1", NULL, "MICBIAS2" },
+ { "Line In2", NULL, "MICBIAS2" },
+ { "Line In3", NULL, "MICBIAS2" },
+ { "Line In4", NULL, "MICBIAS2" },
+
+ { "Line Out1", NULL, "LOUT1L" },
+ { "Line Out1", NULL, "LOUT1R" },
+ { "Line Out2", NULL, "LOUT2L" },
+ { "Line Out2", NULL, "LOUT2R" },
+ { "Headphone", NULL, "HPL" },
+ { "Headphone", NULL, "HPR" },
+ { "Earpiece", NULL, "EP" },
+ { "Speaker", NULL, "SPKL" },
+ { "Stereo Out", NULL, "SPKR" },
+};
+
+static int bfin_eval_adau1373_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ int ret;
+ int pll_rate;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret)
+ return ret;
+
+ switch (params_rate(params)) {
+ case 48000:
+ case 8000:
+ case 12000:
+ case 16000:
+ case 24000:
+ case 32000:
+ pll_rate = 48000 * 1024;
+ break;
+ case 44100:
+ case 7350:
+ case 11025:
+ case 14700:
+ case 22050:
+ case 29400:
+ pll_rate = 44100 * 1024;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = snd_soc_dai_set_pll(codec_dai, ADAU1373_PLL1,
+ ADAU1373_PLL_SRC_MCLK1, 12288000, pll_rate);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, ADAU1373_CLK_SRC_PLL1, pll_rate,
+ SND_SOC_CLOCK_IN);
+
+ return ret;
+}
+
+static int bfin_eval_adau1373_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ unsigned int pll_rate = 48000 * 1024;
+ int ret;
+
+ ret = snd_soc_dai_set_pll(codec_dai, ADAU1373_PLL1,
+ ADAU1373_PLL_SRC_MCLK1, 12288000, pll_rate);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, ADAU1373_CLK_SRC_PLL1, pll_rate,
+ SND_SOC_CLOCK_IN);
+
+ return ret;
+}
+static struct snd_soc_ops bfin_eval_adau1373_ops = {
+ .hw_params = bfin_eval_adau1373_hw_params,
+};
+
+static struct snd_soc_dai_link bfin_eval_adau1373_dai = {
+ .name = "adau1373",
+ .stream_name = "adau1373",
+ .cpu_dai_name = "bfin-i2s.0",
+ .codec_dai_name = "adau1373-aif1",
+ .platform_name = "bfin-i2s-pcm-audio",
+ .codec_name = "adau1373.0-001a",
+ .ops = &bfin_eval_adau1373_ops,
+ .init = bfin_eval_adau1373_codec_init,
+};
+
+static struct snd_soc_card bfin_eval_adau1373 = {
+ .name = "bfin-eval-adau1373",
+ .dai_link = &bfin_eval_adau1373_dai,
+ .num_links = 1,
+
+ .dapm_widgets = bfin_eval_adau1373_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(bfin_eval_adau1373_dapm_widgets),
+ .dapm_routes = bfin_eval_adau1373_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(bfin_eval_adau1373_dapm_routes),
+};
+
+static int bfin_eval_adau1373_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &bfin_eval_adau1373;
+
+ card->dev = &pdev->dev;
+
+ return snd_soc_register_card(&bfin_eval_adau1373);
+}
+
+static int __devexit bfin_eval_adau1373_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+
+ return 0;
+}
+
+static struct platform_driver bfin_eval_adau1373_driver = {
+ .driver = {
+ .name = "bfin-eval-adau1373",
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = bfin_eval_adau1373_probe,
+ .remove = __devexit_p(bfin_eval_adau1373_remove),
+};
+
+static int __init bfin_eval_adau1373_init(void)
+{
+ return platform_driver_register(&bfin_eval_adau1373_driver);
+}
+module_init(bfin_eval_adau1373_init);
+
+static void __exit bfin_eval_adau1373_exit(void)
+{
+ platform_driver_unregister(&bfin_eval_adau1373_driver);
+}
+module_exit(bfin_eval_adau1373_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ALSA SoC bfin adau1373 driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bfin-eval-adau1373");
diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c
index 1924157..5ca122e 100644
--- a/sound/soc/codecs/88pm860x-codec.c
+++ b/sound/soc/codecs/88pm860x-codec.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/mfd/88pm860x.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -772,11 +773,12 @@
SND_SOC_DAPM_AIF_IN("I2S DIN", "I2S Playback", 0,
- PM860X_DAC_EN_2, 0, 0),
+ SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("I2S DIN1", "I2S Playback", 0,
- PM860X_DAC_EN_2, 0, 0),
+ SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("I2S DOUT", "I2S Capture", 0,
PM860X_I2S_IFACE_3, 5, 1),
+ SND_SOC_DAPM_SUPPLY("I2S CLK", PM860X_DAC_EN_2, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("I2S Mic Mux", SND_SOC_NOPM, 0, 0, &i2s_mic_mux),
SND_SOC_DAPM_MUX("ADC Left Mux", SND_SOC_NOPM, 0, 0, &adcl_mux),
SND_SOC_DAPM_MUX("ADC Right Mux", SND_SOC_NOPM, 0, 0, &adcr_mux),
@@ -868,6 +870,11 @@
{"Left ADC", NULL, "Left ADC MOD"},
{"Right ADC", NULL, "Right ADC MOD"},
+ /* I2S Clock */
+ {"I2S DIN", NULL, "I2S CLK"},
+ {"I2S DIN1", NULL, "I2S CLK"},
+ {"I2S DOUT", NULL, "I2S CLK"},
+
/* PCM/AIF1 Inputs */
{"PCM SDO", NULL, "ADC Left Mux"},
{"PCM SDO", NULL, "ADCR EC Mux"},
@@ -1173,6 +1180,9 @@
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
/* Enable Audio PLL & Audio section */
+ data = AUDIO_PLL | AUDIO_SECTION_ON;
+ pm860x_reg_write(codec->control_data, REG_MISC2, data);
+ udelay(300);
data = AUDIO_PLL | AUDIO_SECTION_RESET
| AUDIO_SECTION_ON;
pm860x_reg_write(codec->control_data, REG_MISC2, data);
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 665d924..4584514 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -17,6 +17,7 @@
select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI
select SND_SOC_AD1980 if SND_SOC_AC97_BUS
select SND_SOC_AD73311
+ select SND_SOC_ADAU1373 if I2C
select SND_SOC_ADAV80X
select SND_SOC_ADS117X
select SND_SOC_AK4104 if SPI_MASTER
@@ -39,6 +40,7 @@
select SND_SOC_MAX9850 if I2C
select SND_SOC_MAX9877 if I2C
select SND_SOC_PCM3008
+ select SND_SOC_RT5631 if I2C
select SND_SOC_SGTL5000 if I2C
select SND_SOC_SN95031 if INTEL_SCU_IPC
select SND_SOC_SPDIF
@@ -47,7 +49,7 @@
select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
select SND_SOC_TLV320AIC23 if I2C
select SND_SOC_TLV320AIC26 if SPI_MASTER
- select SND_SOC_TVL320AIC32X4 if I2C
+ select SND_SOC_TLV320AIC32X4 if I2C
select SND_SOC_TLV320AIC3X if I2C
select SND_SOC_TPA6130A2 if I2C
select SND_SOC_TLV320DAC33 if I2C
@@ -58,6 +60,7 @@
select SND_SOC_WL1273 if MFD_WL1273_CORE
select SND_SOC_WM1250_EV1 if I2C
select SND_SOC_WM2000 if I2C
+ select SND_SOC_WM5100 if I2C
select SND_SOC_WM8350 if MFD_WM8350
select SND_SOC_WM8400 if MFD_WM8400
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
@@ -139,6 +142,9 @@
select SIGMA
tristate
+config SND_SOC_ADAU1373
+ tristate
+
config SND_SOC_ADAV80X
tristate
@@ -214,6 +220,9 @@
config SND_SOC_PCM3008
tristate
+config SND_SOC_RT5631
+ tristate
+
#Freescale sgtl5000 codec
config SND_SOC_SGTL5000
tristate
@@ -240,7 +249,7 @@
tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
depends on SPI
-config SND_SOC_TVL320AIC32X4
+config SND_SOC_TLV320AIC32X4
tristate
config SND_SOC_TLV320AIC3X
@@ -269,6 +278,9 @@
config SND_SOC_WM1250_EV1
tristate
+config SND_SOC_WM5100
+ tristate
+
config SND_SOC_WM8350
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 5119a7e..a2c7842 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -5,6 +5,7 @@
snd-soc-ad1980-objs := ad1980.o
snd-soc-ad73311-objs := ad73311.o
snd-soc-adau1701-objs := adau1701.o
+snd-soc-adau1373-objs := adau1373.o
snd-soc-adav80x-objs := adav80x.o
snd-soc-ads117x-objs := ads117x.o
snd-soc-ak4104-objs := ak4104.o
@@ -25,6 +26,7 @@
snd-soc-max98095-objs := max98095.o
snd-soc-max9850-objs := max9850.o
snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-rt5631-objs := rt5631.o
snd-soc-sgtl5000-objs := sgtl5000.o
snd-soc-alc5623-objs := alc5623.o
snd-soc-sn95031-objs := sn95031.o
@@ -43,6 +45,7 @@
snd-soc-uda1380-objs := uda1380.o
snd-soc-wl1273-objs := wl1273.o
snd-soc-wm1250-ev1-objs := wm1250-ev1.o
+snd-soc-wm5100-objs := wm5100.o wm5100-tables.o
snd-soc-wm8350-objs := wm8350.o
snd-soc-wm8400-objs := wm8400.o
snd-soc-wm8510-objs := wm8510.o
@@ -100,6 +103,7 @@
obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o
obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o
obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
+obj-$(CONFIG_SND_SOC_ADAU1373) += snd-soc-adau1373.o
obj-$(CONFIG_SND_SOC_ADAU1701) += snd-soc-adau1701.o
obj-$(CONFIG_SND_SOC_ADAV80X) += snd-soc-adav80x.o
obj-$(CONFIG_SND_SOC_ADS117X) += snd-soc-ads117x.o
@@ -123,6 +127,7 @@
obj-$(CONFIG_SND_SOC_MAX98095) += snd-soc-max98095.o
obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
+obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o
obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o
obj-$(CONFIG_SND_SOC_SN95031) +=snd-soc-sn95031.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o
@@ -132,7 +137,7 @@
obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o
obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o
obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o
-obj-$(CONFIG_SND_SOC_TVL320AIC32X4) += snd-soc-tlv320aic32x4.o
+obj-$(CONFIG_SND_SOC_TLV320AIC32X4) += snd-soc-tlv320aic32x4.o
obj-$(CONFIG_SND_SOC_TLV320DAC33) += snd-soc-tlv320dac33.o
obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o
obj-$(CONFIG_SND_SOC_TWL6040) += snd-soc-twl6040.o
@@ -140,6 +145,7 @@
obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o
obj-$(CONFIG_SND_SOC_WL1273) += snd-soc-wl1273.o
obj-$(CONFIG_SND_SOC_WM1250_EV1) += snd-soc-wm1250-ev1.o
+obj-$(CONFIG_SND_SOC_WM5100) += snd-soc-wm5100.o
obj-$(CONFIG_SND_SOC_WM8350) += snd-soc-wm8350.o
obj-$(CONFIG_SND_SOC_WM8400) += snd-soc-wm8400.o
obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index eedb6f5..1206021 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -23,7 +23,7 @@
/* codec private data */
struct ad193x_priv {
- enum snd_soc_control_type control_type;
+ struct regmap *regmap;
int sysclk;
};
@@ -103,12 +103,14 @@
static int ad193x_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- int reg;
- reg = snd_soc_read(codec, AD193X_DAC_CTRL2);
- reg = (mute > 0) ? reg | AD193X_DAC_MASTER_MUTE : reg &
- (~AD193X_DAC_MASTER_MUTE);
- snd_soc_write(codec, AD193X_DAC_CTRL2, reg);
+ if (mute)
+ snd_soc_update_bits(codec, AD193X_DAC_CTRL2,
+ AD193X_DAC_MASTER_MUTE,
+ AD193X_DAC_MASTER_MUTE);
+ else
+ snd_soc_update_bits(codec, AD193X_DAC_CTRL2,
+ AD193X_DAC_MASTER_MUTE, 0);
return 0;
}
@@ -262,7 +264,7 @@
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- int word_len = 0, reg = 0, master_rate = 0;
+ int word_len = 0, master_rate = 0;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
@@ -297,18 +299,15 @@
break;
}
- reg = snd_soc_read(codec, AD193X_PLL_CLK_CTRL0);
- reg = (reg & AD193X_PLL_INPUT_MASK) | master_rate;
- snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg);
+ snd_soc_update_bits(codec, AD193X_PLL_CLK_CTRL0,
+ AD193X_PLL_INPUT_MASK, master_rate);
- reg = snd_soc_read(codec, AD193X_DAC_CTRL2);
- reg = (reg & (~AD193X_DAC_WORD_LEN_MASK))
- | (word_len << AD193X_DAC_WORD_LEN_SHFT);
- snd_soc_write(codec, AD193X_DAC_CTRL2, reg);
+ snd_soc_update_bits(codec, AD193X_DAC_CTRL2,
+ AD193X_DAC_WORD_LEN_MASK,
+ word_len << AD193X_DAC_WORD_LEN_SHFT);
- reg = snd_soc_read(codec, AD193X_ADC_CTRL1);
- reg = (reg & (~AD193X_ADC_WORD_LEN_MASK)) | word_len;
- snd_soc_write(codec, AD193X_ADC_CTRL1, reg);
+ snd_soc_update_bits(codec, AD193X_ADC_CTRL1,
+ AD193X_ADC_WORD_LEN_MASK, word_len);
return 0;
}
@@ -349,10 +348,8 @@
struct snd_soc_dapm_context *dapm = &codec->dapm;
int ret;
- if (ad193x->control_type == SND_SOC_I2C)
- ret = snd_soc_codec_set_cache_io(codec, 8, 8, ad193x->control_type);
- else
- ret = snd_soc_codec_set_cache_io(codec, 16, 8, ad193x->control_type);
+ codec->control_data = ad193x->regmap;
+ ret = snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP);
if (ret < 0) {
dev_err(codec->dev, "failed to set cache I/O: %d\n", ret);
return ret;
@@ -388,6 +385,14 @@
};
#if defined(CONFIG_SPI_MASTER)
+
+static const struct regmap_config ad193x_spi_regmap_config = {
+ .val_bits = 8,
+ .reg_bits = 16,
+ .read_flag_mask = 0x09,
+ .write_flag_mask = 0x08,
+};
+
static int __devinit ad193x_spi_probe(struct spi_device *spi)
{
struct ad193x_priv *ad193x;
@@ -397,20 +402,36 @@
if (ad193x == NULL)
return -ENOMEM;
+ ad193x->regmap = regmap_init_spi(spi, &ad193x_spi_regmap_config);
+ if (IS_ERR(ad193x->regmap)) {
+ ret = PTR_ERR(ad193x->regmap);
+ goto err_free;
+ }
+
spi_set_drvdata(spi, ad193x);
- ad193x->control_type = SND_SOC_SPI;
ret = snd_soc_register_codec(&spi->dev,
&soc_codec_dev_ad193x, &ad193x_dai, 1);
if (ret < 0)
- kfree(ad193x);
+ goto err_regmap_exit;
+
+ return 0;
+
+err_regmap_exit:
+ regmap_exit(ad193x->regmap);
+err_free:
+ kfree(ad193x);
+
return ret;
}
static int __devexit ad193x_spi_remove(struct spi_device *spi)
{
+ struct ad193x_priv *ad193x = spi_get_drvdata(spi);
+
snd_soc_unregister_codec(&spi->dev);
- kfree(spi_get_drvdata(spi));
+ regmap_exit(ad193x->regmap);
+ kfree(ad193x);
return 0;
}
@@ -425,6 +446,12 @@
#endif
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+
+static const struct regmap_config ad193x_i2c_regmap_config = {
+ .val_bits = 8,
+ .reg_bits = 8,
+};
+
static const struct i2c_device_id ad193x_id[] = {
{ "ad1936", 0 },
{ "ad1937", 0 },
@@ -442,20 +469,35 @@
if (ad193x == NULL)
return -ENOMEM;
+ ad193x->regmap = regmap_init_i2c(client, &ad193x_i2c_regmap_config);
+ if (IS_ERR(ad193x->regmap)) {
+ ret = PTR_ERR(ad193x->regmap);
+ goto err_free;
+ }
+
i2c_set_clientdata(client, ad193x);
- ad193x->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&client->dev,
&soc_codec_dev_ad193x, &ad193x_dai, 1);
if (ret < 0)
- kfree(ad193x);
+ goto err_regmap_exit;
+
+ return 0;
+
+err_regmap_exit:
+ regmap_exit(ad193x->regmap);
+err_free:
+ kfree(ad193x);
return ret;
}
static int __devexit ad193x_i2c_remove(struct i2c_client *client)
{
+ struct ad193x_priv *ad193x = i2c_get_clientdata(client);
+
snd_soc_unregister_codec(&client->dev);
- kfree(i2c_get_clientdata(client));
+ regmap_exit(ad193x->regmap);
+ kfree(ad193x);
return 0;
}
diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h
index cccc2e8..1507eaa 100644
--- a/sound/soc/codecs/ad193x.h
+++ b/sound/soc/codecs/ad193x.h
@@ -9,20 +9,20 @@
#ifndef __AD193X_H__
#define __AD193X_H__
-#define AD193X_PLL_CLK_CTRL0 0x800
+#define AD193X_PLL_CLK_CTRL0 0x00
#define AD193X_PLL_POWERDOWN 0x01
-#define AD193X_PLL_INPUT_MASK (~0x6)
+#define AD193X_PLL_INPUT_MASK 0x6
#define AD193X_PLL_INPUT_256 (0 << 1)
#define AD193X_PLL_INPUT_384 (1 << 1)
#define AD193X_PLL_INPUT_512 (2 << 1)
#define AD193X_PLL_INPUT_768 (3 << 1)
-#define AD193X_PLL_CLK_CTRL1 0x801
-#define AD193X_DAC_CTRL0 0x802
+#define AD193X_PLL_CLK_CTRL1 0x01
+#define AD193X_DAC_CTRL0 0x02
#define AD193X_DAC_POWERDOWN 0x01
#define AD193X_DAC_SERFMT_MASK 0xC0
#define AD193X_DAC_SERFMT_STEREO (0 << 6)
#define AD193X_DAC_SERFMT_TDM (1 << 6)
-#define AD193X_DAC_CTRL1 0x803
+#define AD193X_DAC_CTRL1 0x03
#define AD193X_DAC_2_CHANNELS 0
#define AD193X_DAC_4_CHANNELS 1
#define AD193X_DAC_8_CHANNELS 2
@@ -33,11 +33,11 @@
#define AD193X_DAC_BCLK_MASTER (1 << 5)
#define AD193X_DAC_LEFT_HIGH (1 << 3)
#define AD193X_DAC_BCLK_INV (1 << 7)
-#define AD193X_DAC_CTRL2 0x804
+#define AD193X_DAC_CTRL2 0x04
#define AD193X_DAC_WORD_LEN_SHFT 3
#define AD193X_DAC_WORD_LEN_MASK 0x18
#define AD193X_DAC_MASTER_MUTE 1
-#define AD193X_DAC_CHNL_MUTE 0x805
+#define AD193X_DAC_CHNL_MUTE 0x05
#define AD193X_DACL1_MUTE 0
#define AD193X_DACR1_MUTE 1
#define AD193X_DACL2_MUTE 2
@@ -46,28 +46,28 @@
#define AD193X_DACR3_MUTE 5
#define AD193X_DACL4_MUTE 6
#define AD193X_DACR4_MUTE 7
-#define AD193X_DAC_L1_VOL 0x806
-#define AD193X_DAC_R1_VOL 0x807
-#define AD193X_DAC_L2_VOL 0x808
-#define AD193X_DAC_R2_VOL 0x809
-#define AD193X_DAC_L3_VOL 0x80a
-#define AD193X_DAC_R3_VOL 0x80b
-#define AD193X_DAC_L4_VOL 0x80c
-#define AD193X_DAC_R4_VOL 0x80d
-#define AD193X_ADC_CTRL0 0x80e
+#define AD193X_DAC_L1_VOL 0x06
+#define AD193X_DAC_R1_VOL 0x07
+#define AD193X_DAC_L2_VOL 0x08
+#define AD193X_DAC_R2_VOL 0x09
+#define AD193X_DAC_L3_VOL 0x0a
+#define AD193X_DAC_R3_VOL 0x0b
+#define AD193X_DAC_L4_VOL 0x0c
+#define AD193X_DAC_R4_VOL 0x0d
+#define AD193X_ADC_CTRL0 0x0e
#define AD193X_ADC_POWERDOWN 0x01
#define AD193X_ADC_HIGHPASS_FILTER 1
#define AD193X_ADCL1_MUTE 2
#define AD193X_ADCR1_MUTE 3
#define AD193X_ADCL2_MUTE 4
#define AD193X_ADCR2_MUTE 5
-#define AD193X_ADC_CTRL1 0x80f
+#define AD193X_ADC_CTRL1 0x0f
#define AD193X_ADC_SERFMT_MASK 0x60
#define AD193X_ADC_SERFMT_STEREO (0 << 5)
#define AD193X_ADC_SERFMT_TDM (1 << 5)
#define AD193X_ADC_SERFMT_AUX (2 << 5)
#define AD193X_ADC_WORD_LEN_MASK 0x3
-#define AD193X_ADC_CTRL2 0x810
+#define AD193X_ADC_CTRL2 0x10
#define AD193X_ADC_2_CHANNELS 0
#define AD193X_ADC_4_CHANNELS 1
#define AD193X_ADC_8_CHANNELS 2
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index 923b364..e3931cc 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -148,7 +148,6 @@
.rates = SNDRV_PCM_RATE_48000,
.formats = SND_SOC_STD_AC97_FMTS, },
};
-EXPORT_SYMBOL_GPL(ad1980_dai);
static int ad1980_reset(struct snd_soc_codec *codec, int try_warm)
{
@@ -200,18 +199,22 @@
}
/* Read out vendor ID to make sure it is ad1980 */
- if (ac97_read(codec, AC97_VENDOR_ID1) != 0x4144)
+ if (ac97_read(codec, AC97_VENDOR_ID1) != 0x4144) {
+ ret = -ENODEV;
goto reset_err;
+ }
vendor_id2 = ac97_read(codec, AC97_VENDOR_ID2);
if (vendor_id2 != 0x5370) {
- if (vendor_id2 != 0x5374)
+ if (vendor_id2 != 0x5374) {
+ ret = -ENODEV;
goto reset_err;
- else
+ } else {
printk(KERN_WARNING "ad1980: "
"Found AD1981 - only 2/2 IN/OUT Channels "
"supported\n");
+ }
}
/* unmute captures and playbacks volume */
diff --git a/sound/soc/codecs/adau1373.c b/sound/soc/codecs/adau1373.c
new file mode 100644
index 0000000..1ccf8dd
--- /dev/null
+++ b/sound/soc/codecs/adau1373.c
@@ -0,0 +1,1414 @@
+/*
+ * Analog Devices ADAU1373 Audio Codec drive
+ *
+ * Copyright 2011 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/gcd.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/adau1373.h>
+
+#include "adau1373.h"
+
+struct adau1373_dai {
+ unsigned int clk_src;
+ unsigned int sysclk;
+ bool enable_src;
+ bool master;
+};
+
+struct adau1373 {
+ struct adau1373_dai dais[3];
+};
+
+#define ADAU1373_INPUT_MODE 0x00
+#define ADAU1373_AINL_CTRL(x) (0x01 + (x) * 2)
+#define ADAU1373_AINR_CTRL(x) (0x02 + (x) * 2)
+#define ADAU1373_LLINE_OUT(x) (0x9 + (x) * 2)
+#define ADAU1373_RLINE_OUT(x) (0xa + (x) * 2)
+#define ADAU1373_LSPK_OUT 0x0d
+#define ADAU1373_RSPK_OUT 0x0e
+#define ADAU1373_LHP_OUT 0x0f
+#define ADAU1373_RHP_OUT 0x10
+#define ADAU1373_ADC_GAIN 0x11
+#define ADAU1373_LADC_MIXER 0x12
+#define ADAU1373_RADC_MIXER 0x13
+#define ADAU1373_LLINE1_MIX 0x14
+#define ADAU1373_RLINE1_MIX 0x15
+#define ADAU1373_LLINE2_MIX 0x16
+#define ADAU1373_RLINE2_MIX 0x17
+#define ADAU1373_LSPK_MIX 0x18
+#define ADAU1373_RSPK_MIX 0x19
+#define ADAU1373_LHP_MIX 0x1a
+#define ADAU1373_RHP_MIX 0x1b
+#define ADAU1373_EP_MIX 0x1c
+#define ADAU1373_HP_CTRL 0x1d
+#define ADAU1373_HP_CTRL2 0x1e
+#define ADAU1373_LS_CTRL 0x1f
+#define ADAU1373_EP_CTRL 0x21
+#define ADAU1373_MICBIAS_CTRL1 0x22
+#define ADAU1373_MICBIAS_CTRL2 0x23
+#define ADAU1373_OUTPUT_CTRL 0x24
+#define ADAU1373_PWDN_CTRL1 0x25
+#define ADAU1373_PWDN_CTRL2 0x26
+#define ADAU1373_PWDN_CTRL3 0x27
+#define ADAU1373_DPLL_CTRL(x) (0x28 + (x) * 7)
+#define ADAU1373_PLL_CTRL1(x) (0x29 + (x) * 7)
+#define ADAU1373_PLL_CTRL2(x) (0x2a + (x) * 7)
+#define ADAU1373_PLL_CTRL3(x) (0x2b + (x) * 7)
+#define ADAU1373_PLL_CTRL4(x) (0x2c + (x) * 7)
+#define ADAU1373_PLL_CTRL5(x) (0x2d + (x) * 7)
+#define ADAU1373_PLL_CTRL6(x) (0x2e + (x) * 7)
+#define ADAU1373_PLL_CTRL7(x) (0x2f + (x) * 7)
+#define ADAU1373_HEADDECT 0x36
+#define ADAU1373_ADC_DAC_STATUS 0x37
+#define ADAU1373_ADC_CTRL 0x3c
+#define ADAU1373_DAI(x) (0x44 + (x))
+#define ADAU1373_CLK_SRC_DIV(x) (0x40 + (x) * 2)
+#define ADAU1373_BCLKDIV(x) (0x47 + (x))
+#define ADAU1373_SRC_RATIOA(x) (0x4a + (x) * 2)
+#define ADAU1373_SRC_RATIOB(x) (0x4b + (x) * 2)
+#define ADAU1373_DEEMP_CTRL 0x50
+#define ADAU1373_SRC_DAI_CTRL(x) (0x51 + (x))
+#define ADAU1373_DIN_MIX_CTRL(x) (0x56 + (x))
+#define ADAU1373_DOUT_MIX_CTRL(x) (0x5b + (x))
+#define ADAU1373_DAI_PBL_VOL(x) (0x62 + (x) * 2)
+#define ADAU1373_DAI_PBR_VOL(x) (0x63 + (x) * 2)
+#define ADAU1373_DAI_RECL_VOL(x) (0x68 + (x) * 2)
+#define ADAU1373_DAI_RECR_VOL(x) (0x69 + (x) * 2)
+#define ADAU1373_DAC1_PBL_VOL 0x6e
+#define ADAU1373_DAC1_PBR_VOL 0x6f
+#define ADAU1373_DAC2_PBL_VOL 0x70
+#define ADAU1373_DAC2_PBR_VOL 0x71
+#define ADAU1373_ADC_RECL_VOL 0x72
+#define ADAU1373_ADC_RECR_VOL 0x73
+#define ADAU1373_DMIC_RECL_VOL 0x74
+#define ADAU1373_DMIC_RECR_VOL 0x75
+#define ADAU1373_VOL_GAIN1 0x76
+#define ADAU1373_VOL_GAIN2 0x77
+#define ADAU1373_VOL_GAIN3 0x78
+#define ADAU1373_HPF_CTRL 0x7d
+#define ADAU1373_BASS1 0x7e
+#define ADAU1373_BASS2 0x7f
+#define ADAU1373_DRC(x) (0x80 + (x) * 0x10)
+#define ADAU1373_3D_CTRL1 0xc0
+#define ADAU1373_3D_CTRL2 0xc1
+#define ADAU1373_FDSP_SEL1 0xdc
+#define ADAU1373_FDSP_SEL2 0xdd
+#define ADAU1373_FDSP_SEL3 0xde
+#define ADAU1373_FDSP_SEL4 0xdf
+#define ADAU1373_DIGMICCTRL 0xe2
+#define ADAU1373_DIGEN 0xeb
+#define ADAU1373_SOFT_RESET 0xff
+
+
+#define ADAU1373_PLL_CTRL6_DPLL_BYPASS BIT(1)
+#define ADAU1373_PLL_CTRL6_PLL_EN BIT(0)
+
+#define ADAU1373_DAI_INVERT_BCLK BIT(7)
+#define ADAU1373_DAI_MASTER BIT(6)
+#define ADAU1373_DAI_INVERT_LRCLK BIT(4)
+#define ADAU1373_DAI_WLEN_16 0x0
+#define ADAU1373_DAI_WLEN_20 0x4
+#define ADAU1373_DAI_WLEN_24 0x8
+#define ADAU1373_DAI_WLEN_32 0xc
+#define ADAU1373_DAI_WLEN_MASK 0xc
+#define ADAU1373_DAI_FORMAT_RIGHT_J 0x0
+#define ADAU1373_DAI_FORMAT_LEFT_J 0x1
+#define ADAU1373_DAI_FORMAT_I2S 0x2
+#define ADAU1373_DAI_FORMAT_DSP 0x3
+
+#define ADAU1373_BCLKDIV_SOURCE BIT(5)
+#define ADAU1373_BCLKDIV_32 0x03
+#define ADAU1373_BCLKDIV_64 0x02
+#define ADAU1373_BCLKDIV_128 0x01
+#define ADAU1373_BCLKDIV_256 0x00
+
+#define ADAU1373_ADC_CTRL_PEAK_DETECT BIT(0)
+#define ADAU1373_ADC_CTRL_RESET BIT(1)
+#define ADAU1373_ADC_CTRL_RESET_FORCE BIT(2)
+
+#define ADAU1373_OUTPUT_CTRL_LDIFF BIT(3)
+#define ADAU1373_OUTPUT_CTRL_LNFBEN BIT(2)
+
+#define ADAU1373_PWDN_CTRL3_PWR_EN BIT(0)
+
+#define ADAU1373_EP_CTRL_MICBIAS1_OFFSET 4
+#define ADAU1373_EP_CTRL_MICBIAS2_OFFSET 2
+
+static const uint8_t adau1373_default_regs[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x00 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x10 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x20 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, /* 0x30 */
+ 0x00, 0x00, 0x00, 0x80, 0x00, 0x01, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x00, /* 0x40 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x78, 0x18, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, /* 0x80 */
+ 0x00, 0xc0, 0x88, 0x7a, 0xdf, 0x20, 0x00, 0x00,
+ 0x78, 0x18, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, /* 0x90 */
+ 0x00, 0xc0, 0x88, 0x7a, 0xdf, 0x20, 0x00, 0x00,
+ 0x78, 0x18, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, /* 0xa0 */
+ 0x00, 0xc0, 0x88, 0x7a, 0xdf, 0x20, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0xb0 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xd0 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, /* 0xe0 */
+ 0x00, 0x1f, 0x0f, 0x00, 0x00,
+};
+
+static const unsigned int adau1373_out_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 7, TLV_DB_SCALE_ITEM(-7900, 400, 1),
+ 8, 15, TLV_DB_SCALE_ITEM(-4700, 300, 0),
+ 16, 23, TLV_DB_SCALE_ITEM(-2300, 200, 0),
+ 24, 31, TLV_DB_SCALE_ITEM(-700, 100, 0),
+};
+
+static const DECLARE_TLV_DB_MINMAX(adau1373_digital_tlv, -9563, 0);
+static const DECLARE_TLV_DB_SCALE(adau1373_in_pga_tlv, -1300, 100, 1);
+static const DECLARE_TLV_DB_SCALE(adau1373_ep_tlv, -600, 600, 1);
+
+static const DECLARE_TLV_DB_SCALE(adau1373_input_boost_tlv, 0, 2000, 0);
+static const DECLARE_TLV_DB_SCALE(adau1373_gain_boost_tlv, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(adau1373_speaker_boost_tlv, 1200, 600, 0);
+
+static const char *adau1373_fdsp_sel_text[] = {
+ "None",
+ "Channel 1",
+ "Channel 2",
+ "Channel 3",
+ "Channel 4",
+ "Channel 5",
+};
+
+static const SOC_ENUM_SINGLE_DECL(adau1373_drc1_channel_enum,
+ ADAU1373_FDSP_SEL1, 4, adau1373_fdsp_sel_text);
+static const SOC_ENUM_SINGLE_DECL(adau1373_drc2_channel_enum,
+ ADAU1373_FDSP_SEL1, 0, adau1373_fdsp_sel_text);
+static const SOC_ENUM_SINGLE_DECL(adau1373_drc3_channel_enum,
+ ADAU1373_FDSP_SEL2, 0, adau1373_fdsp_sel_text);
+static const SOC_ENUM_SINGLE_DECL(adau1373_hpf_channel_enum,
+ ADAU1373_FDSP_SEL3, 0, adau1373_fdsp_sel_text);
+static const SOC_ENUM_SINGLE_DECL(adau1373_bass_channel_enum,
+ ADAU1373_FDSP_SEL4, 4, adau1373_fdsp_sel_text);
+
+static const char *adau1373_hpf_cutoff_text[] = {
+ "3.7Hz", "50Hz", "100Hz", "150Hz", "200Hz", "250Hz", "300Hz", "350Hz",
+ "400Hz", "450Hz", "500Hz", "550Hz", "600Hz", "650Hz", "700Hz", "750Hz",
+ "800Hz",
+};
+
+static const SOC_ENUM_SINGLE_DECL(adau1373_hpf_cutoff_enum,
+ ADAU1373_HPF_CTRL, 3, adau1373_hpf_cutoff_text);
+
+static const char *adau1373_bass_lpf_cutoff_text[] = {
+ "801Hz", "1001Hz",
+};
+
+static const char *adau1373_bass_clip_level_text[] = {
+ "0.125", "0.250", "0.370", "0.500", "0.625", "0.750", "0.875",
+};
+
+static const unsigned int adau1373_bass_clip_level_values[] = {
+ 1, 2, 3, 4, 5, 6, 7,
+};
+
+static const char *adau1373_bass_hpf_cutoff_text[] = {
+ "158Hz", "232Hz", "347Hz", "520Hz",
+};
+
+static const unsigned int adau1373_bass_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 2, TLV_DB_SCALE_ITEM(-600, 600, 1),
+ 3, 4, TLV_DB_SCALE_ITEM(950, 250, 0),
+ 5, 7, TLV_DB_SCALE_ITEM(1400, 150, 0),
+};
+
+static const SOC_ENUM_SINGLE_DECL(adau1373_bass_lpf_cutoff_enum,
+ ADAU1373_BASS1, 5, adau1373_bass_lpf_cutoff_text);
+
+static const SOC_VALUE_ENUM_SINGLE_DECL(adau1373_bass_clip_level_enum,
+ ADAU1373_BASS1, 2, 7, adau1373_bass_clip_level_text,
+ adau1373_bass_clip_level_values);
+
+static const SOC_ENUM_SINGLE_DECL(adau1373_bass_hpf_cutoff_enum,
+ ADAU1373_BASS1, 0, adau1373_bass_hpf_cutoff_text);
+
+static const char *adau1373_3d_level_text[] = {
+ "0%", "6.67%", "13.33%", "20%", "26.67%", "33.33%",
+ "40%", "46.67%", "53.33%", "60%", "66.67%", "73.33%",
+ "80%", "86.67", "99.33%", "100%"
+};
+
+static const char *adau1373_3d_cutoff_text[] = {
+ "No 3D", "0.03125 fs", "0.04583 fs", "0.075 fs", "0.11458 fs",
+ "0.16875 fs", "0.27083 fs"
+};
+
+static const SOC_ENUM_SINGLE_DECL(adau1373_3d_level_enum,
+ ADAU1373_3D_CTRL1, 4, adau1373_3d_level_text);
+static const SOC_ENUM_SINGLE_DECL(adau1373_3d_cutoff_enum,
+ ADAU1373_3D_CTRL1, 0, adau1373_3d_cutoff_text);
+
+static const unsigned int adau1373_3d_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 7, TLV_DB_LINEAR_ITEM(-1800, -120),
+};
+
+static const char *adau1373_lr_mux_text[] = {
+ "Mute",
+ "Right Channel (L+R)",
+ "Left Channel (L+R)",
+ "Stereo",
+};
+
+static const SOC_ENUM_SINGLE_DECL(adau1373_lineout1_lr_mux_enum,
+ ADAU1373_OUTPUT_CTRL, 4, adau1373_lr_mux_text);
+static const SOC_ENUM_SINGLE_DECL(adau1373_lineout2_lr_mux_enum,
+ ADAU1373_OUTPUT_CTRL, 6, adau1373_lr_mux_text);
+static const SOC_ENUM_SINGLE_DECL(adau1373_speaker_lr_mux_enum,
+ ADAU1373_LS_CTRL, 4, adau1373_lr_mux_text);
+
+static const struct snd_kcontrol_new adau1373_controls[] = {
+ SOC_DOUBLE_R_TLV("AIF1 Capture Volume", ADAU1373_DAI_RECL_VOL(0),
+ ADAU1373_DAI_RECR_VOL(0), 0, 0xff, 1, adau1373_digital_tlv),
+ SOC_DOUBLE_R_TLV("AIF2 Capture Volume", ADAU1373_DAI_RECL_VOL(1),
+ ADAU1373_DAI_RECR_VOL(1), 0, 0xff, 1, adau1373_digital_tlv),
+ SOC_DOUBLE_R_TLV("AIF3 Capture Volume", ADAU1373_DAI_RECL_VOL(2),
+ ADAU1373_DAI_RECR_VOL(2), 0, 0xff, 1, adau1373_digital_tlv),
+
+ SOC_DOUBLE_R_TLV("ADC Capture Volume", ADAU1373_ADC_RECL_VOL,
+ ADAU1373_ADC_RECR_VOL, 0, 0xff, 1, adau1373_digital_tlv),
+ SOC_DOUBLE_R_TLV("DMIC Capture Volume", ADAU1373_DMIC_RECL_VOL,
+ ADAU1373_DMIC_RECR_VOL, 0, 0xff, 1, adau1373_digital_tlv),
+
+ SOC_DOUBLE_R_TLV("AIF1 Playback Volume", ADAU1373_DAI_PBL_VOL(0),
+ ADAU1373_DAI_PBR_VOL(0), 0, 0xff, 1, adau1373_digital_tlv),
+ SOC_DOUBLE_R_TLV("AIF2 Playback Volume", ADAU1373_DAI_PBL_VOL(1),
+ ADAU1373_DAI_PBR_VOL(1), 0, 0xff, 1, adau1373_digital_tlv),
+ SOC_DOUBLE_R_TLV("AIF3 Playback Volume", ADAU1373_DAI_PBL_VOL(2),
+ ADAU1373_DAI_PBR_VOL(2), 0, 0xff, 1, adau1373_digital_tlv),
+
+ SOC_DOUBLE_R_TLV("DAC1 Playback Volume", ADAU1373_DAC1_PBL_VOL,
+ ADAU1373_DAC1_PBR_VOL, 0, 0xff, 1, adau1373_digital_tlv),
+ SOC_DOUBLE_R_TLV("DAC2 Playback Volume", ADAU1373_DAC2_PBL_VOL,
+ ADAU1373_DAC2_PBR_VOL, 0, 0xff, 1, adau1373_digital_tlv),
+
+ SOC_DOUBLE_R_TLV("Lineout1 Playback Volume", ADAU1373_LLINE_OUT(0),
+ ADAU1373_RLINE_OUT(0), 0, 0x1f, 0, adau1373_out_tlv),
+ SOC_DOUBLE_R_TLV("Speaker Playback Volume", ADAU1373_LSPK_OUT,
+ ADAU1373_RSPK_OUT, 0, 0x1f, 0, adau1373_out_tlv),
+ SOC_DOUBLE_R_TLV("Headphone Playback Volume", ADAU1373_LHP_OUT,
+ ADAU1373_RHP_OUT, 0, 0x1f, 0, adau1373_out_tlv),
+
+ SOC_DOUBLE_R_TLV("Input 1 Capture Volume", ADAU1373_AINL_CTRL(0),
+ ADAU1373_AINR_CTRL(0), 0, 0x1f, 0, adau1373_in_pga_tlv),
+ SOC_DOUBLE_R_TLV("Input 2 Capture Volume", ADAU1373_AINL_CTRL(1),
+ ADAU1373_AINR_CTRL(1), 0, 0x1f, 0, adau1373_in_pga_tlv),
+ SOC_DOUBLE_R_TLV("Input 3 Capture Volume", ADAU1373_AINL_CTRL(2),
+ ADAU1373_AINR_CTRL(2), 0, 0x1f, 0, adau1373_in_pga_tlv),
+ SOC_DOUBLE_R_TLV("Input 4 Capture Volume", ADAU1373_AINL_CTRL(3),
+ ADAU1373_AINR_CTRL(3), 0, 0x1f, 0, adau1373_in_pga_tlv),
+
+ SOC_SINGLE_TLV("Earpiece Playback Volume", ADAU1373_EP_CTRL, 0, 3, 0,
+ adau1373_ep_tlv),
+
+ SOC_DOUBLE_TLV("AIF3 Boost Playback Volume", ADAU1373_VOL_GAIN1, 4, 5,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("AIF2 Boost Playback Volume", ADAU1373_VOL_GAIN1, 2, 3,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("AIF1 Boost Playback Volume", ADAU1373_VOL_GAIN1, 0, 1,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("AIF3 Boost Capture Volume", ADAU1373_VOL_GAIN2, 4, 5,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("AIF2 Boost Capture Volume", ADAU1373_VOL_GAIN2, 2, 3,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("AIF1 Boost Capture Volume", ADAU1373_VOL_GAIN2, 0, 1,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("DMIC Boost Capture Volume", ADAU1373_VOL_GAIN3, 6, 7,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("ADC Boost Capture Volume", ADAU1373_VOL_GAIN3, 4, 5,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("DAC2 Boost Playback Volume", ADAU1373_VOL_GAIN3, 2, 3,
+ 1, 0, adau1373_gain_boost_tlv),
+ SOC_DOUBLE_TLV("DAC1 Boost Playback Volume", ADAU1373_VOL_GAIN3, 0, 1,
+ 1, 0, adau1373_gain_boost_tlv),
+
+ SOC_DOUBLE_TLV("Input 1 Boost Capture Volume", ADAU1373_ADC_GAIN, 0, 4,
+ 1, 0, adau1373_input_boost_tlv),
+ SOC_DOUBLE_TLV("Input 2 Boost Capture Volume", ADAU1373_ADC_GAIN, 1, 5,
+ 1, 0, adau1373_input_boost_tlv),
+ SOC_DOUBLE_TLV("Input 3 Boost Capture Volume", ADAU1373_ADC_GAIN, 2, 6,
+ 1, 0, adau1373_input_boost_tlv),
+ SOC_DOUBLE_TLV("Input 4 Boost Capture Volume", ADAU1373_ADC_GAIN, 3, 7,
+ 1, 0, adau1373_input_boost_tlv),
+
+ SOC_DOUBLE_TLV("Speaker Boost Playback Volume", ADAU1373_LS_CTRL, 2, 3,
+ 1, 0, adau1373_speaker_boost_tlv),
+
+ SOC_ENUM("Lineout1 LR Mux", adau1373_lineout1_lr_mux_enum),
+ SOC_ENUM("Speaker LR Mux", adau1373_speaker_lr_mux_enum),
+
+ SOC_ENUM("HPF Cutoff", adau1373_hpf_cutoff_enum),
+ SOC_DOUBLE("HPF Switch", ADAU1373_HPF_CTRL, 1, 0, 1, 0),
+ SOC_ENUM("HPF Channel", adau1373_hpf_channel_enum),
+
+ SOC_ENUM("Bass HPF Cutoff", adau1373_bass_hpf_cutoff_enum),
+ SOC_VALUE_ENUM("Bass Clip Level Threshold",
+ adau1373_bass_clip_level_enum),
+ SOC_ENUM("Bass LPF Cutoff", adau1373_bass_lpf_cutoff_enum),
+ SOC_DOUBLE("Bass Playback Switch", ADAU1373_BASS2, 0, 1, 1, 0),
+ SOC_SINGLE_TLV("Bass Playback Volume", ADAU1373_BASS2, 2, 7, 0,
+ adau1373_bass_tlv),
+ SOC_ENUM("Bass Channel", adau1373_bass_channel_enum),
+
+ SOC_ENUM("3D Freq", adau1373_3d_cutoff_enum),
+ SOC_ENUM("3D Level", adau1373_3d_level_enum),
+ SOC_SINGLE("3D Playback Switch", ADAU1373_3D_CTRL2, 0, 1, 0),
+ SOC_SINGLE_TLV("3D Playback Volume", ADAU1373_3D_CTRL2, 2, 7, 0,
+ adau1373_3d_tlv),
+ SOC_ENUM("3D Channel", adau1373_bass_channel_enum),
+
+ SOC_SINGLE("Zero Cross Switch", ADAU1373_PWDN_CTRL3, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new adau1373_lineout2_controls[] = {
+ SOC_DOUBLE_R_TLV("Lineout2 Playback Volume", ADAU1373_LLINE_OUT(1),
+ ADAU1373_RLINE_OUT(1), 0, 0x1f, 0, adau1373_out_tlv),
+ SOC_ENUM("Lineout2 LR Mux", adau1373_lineout2_lr_mux_enum),
+};
+
+static const struct snd_kcontrol_new adau1373_drc_controls[] = {
+ SOC_ENUM("DRC1 Channel", adau1373_drc1_channel_enum),
+ SOC_ENUM("DRC2 Channel", adau1373_drc2_channel_enum),
+ SOC_ENUM("DRC3 Channel", adau1373_drc3_channel_enum),
+};
+
+static int adau1373_pll_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ unsigned int pll_id = w->name[3] - '1';
+ unsigned int val;
+
+ if (SND_SOC_DAPM_EVENT_ON(event))
+ val = ADAU1373_PLL_CTRL6_PLL_EN;
+ else
+ val = 0;
+
+ snd_soc_update_bits(codec, ADAU1373_PLL_CTRL6(pll_id),
+ ADAU1373_PLL_CTRL6_PLL_EN, val);
+
+ if (SND_SOC_DAPM_EVENT_ON(event))
+ mdelay(5);
+
+ return 0;
+}
+
+static const char *adau1373_decimator_text[] = {
+ "ADC",
+ "DMIC1",
+};
+
+static const struct soc_enum adau1373_decimator_enum =
+ SOC_ENUM_SINGLE(0, 0, 2, adau1373_decimator_text);
+
+static const struct snd_kcontrol_new adau1373_decimator_mux =
+ SOC_DAPM_ENUM_VIRT("Decimator Mux", adau1373_decimator_enum);
+
+static const struct snd_kcontrol_new adau1373_left_adc_mixer_controls[] = {
+ SOC_DAPM_SINGLE("DAC1 Switch", ADAU1373_LADC_MIXER, 4, 1, 0),
+ SOC_DAPM_SINGLE("Input 4 Switch", ADAU1373_LADC_MIXER, 3, 1, 0),
+ SOC_DAPM_SINGLE("Input 3 Switch", ADAU1373_LADC_MIXER, 2, 1, 0),
+ SOC_DAPM_SINGLE("Input 2 Switch", ADAU1373_LADC_MIXER, 1, 1, 0),
+ SOC_DAPM_SINGLE("Input 1 Switch", ADAU1373_LADC_MIXER, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new adau1373_right_adc_mixer_controls[] = {
+ SOC_DAPM_SINGLE("DAC1 Switch", ADAU1373_RADC_MIXER, 4, 1, 0),
+ SOC_DAPM_SINGLE("Input 4 Switch", ADAU1373_RADC_MIXER, 3, 1, 0),
+ SOC_DAPM_SINGLE("Input 3 Switch", ADAU1373_RADC_MIXER, 2, 1, 0),
+ SOC_DAPM_SINGLE("Input 2 Switch", ADAU1373_RADC_MIXER, 1, 1, 0),
+ SOC_DAPM_SINGLE("Input 1 Switch", ADAU1373_RADC_MIXER, 0, 1, 0),
+};
+
+#define DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(_name, _reg) \
+const struct snd_kcontrol_new _name[] = { \
+ SOC_DAPM_SINGLE("Left DAC2 Switch", _reg, 7, 1, 0), \
+ SOC_DAPM_SINGLE("Right DAC2 Switch", _reg, 6, 1, 0), \
+ SOC_DAPM_SINGLE("Left DAC1 Switch", _reg, 5, 1, 0), \
+ SOC_DAPM_SINGLE("Right DAC1 Switch", _reg, 4, 1, 0), \
+ SOC_DAPM_SINGLE("Input 4 Bypass Switch", _reg, 3, 1, 0), \
+ SOC_DAPM_SINGLE("Input 3 Bypass Switch", _reg, 2, 1, 0), \
+ SOC_DAPM_SINGLE("Input 2 Bypass Switch", _reg, 1, 1, 0), \
+ SOC_DAPM_SINGLE("Input 1 Bypass Switch", _reg, 0, 1, 0), \
+}
+
+static DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(adau1373_left_line1_mixer_controls,
+ ADAU1373_LLINE1_MIX);
+static DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(adau1373_right_line1_mixer_controls,
+ ADAU1373_RLINE1_MIX);
+static DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(adau1373_left_line2_mixer_controls,
+ ADAU1373_LLINE2_MIX);
+static DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(adau1373_right_line2_mixer_controls,
+ ADAU1373_RLINE2_MIX);
+static DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(adau1373_left_spk_mixer_controls,
+ ADAU1373_LSPK_MIX);
+static DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(adau1373_right_spk_mixer_controls,
+ ADAU1373_RSPK_MIX);
+static DECLARE_ADAU1373_OUTPUT_MIXER_CTRLS(adau1373_ep_mixer_controls,
+ ADAU1373_EP_MIX);
+
+static const struct snd_kcontrol_new adau1373_left_hp_mixer_controls[] = {
+ SOC_DAPM_SINGLE("Left DAC1 Switch", ADAU1373_LHP_MIX, 5, 1, 0),
+ SOC_DAPM_SINGLE("Left DAC2 Switch", ADAU1373_LHP_MIX, 4, 1, 0),
+ SOC_DAPM_SINGLE("Input 4 Bypass Switch", ADAU1373_LHP_MIX, 3, 1, 0),
+ SOC_DAPM_SINGLE("Input 3 Bypass Switch", ADAU1373_LHP_MIX, 2, 1, 0),
+ SOC_DAPM_SINGLE("Input 2 Bypass Switch", ADAU1373_LHP_MIX, 1, 1, 0),
+ SOC_DAPM_SINGLE("Input 1 Bypass Switch", ADAU1373_LHP_MIX, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new adau1373_right_hp_mixer_controls[] = {
+ SOC_DAPM_SINGLE("Right DAC1 Switch", ADAU1373_RHP_MIX, 5, 1, 0),
+ SOC_DAPM_SINGLE("Right DAC2 Switch", ADAU1373_RHP_MIX, 4, 1, 0),
+ SOC_DAPM_SINGLE("Input 4 Bypass Switch", ADAU1373_RHP_MIX, 3, 1, 0),
+ SOC_DAPM_SINGLE("Input 3 Bypass Switch", ADAU1373_RHP_MIX, 2, 1, 0),
+ SOC_DAPM_SINGLE("Input 2 Bypass Switch", ADAU1373_RHP_MIX, 1, 1, 0),
+ SOC_DAPM_SINGLE("Input 1 Bypass Switch", ADAU1373_RHP_MIX, 0, 1, 0),
+};
+
+#define DECLARE_ADAU1373_DSP_CHANNEL_MIXER_CTRLS(_name, _reg) \
+const struct snd_kcontrol_new _name[] = { \
+ SOC_DAPM_SINGLE("DMIC2 Swapped Switch", _reg, 6, 1, 0), \
+ SOC_DAPM_SINGLE("DMIC2 Switch", _reg, 5, 1, 0), \
+ SOC_DAPM_SINGLE("ADC/DMIC1 Swapped Switch", _reg, 4, 1, 0), \
+ SOC_DAPM_SINGLE("ADC/DMIC1 Switch", _reg, 3, 1, 0), \
+ SOC_DAPM_SINGLE("AIF3 Switch", _reg, 2, 1, 0), \
+ SOC_DAPM_SINGLE("AIF2 Switch", _reg, 1, 1, 0), \
+ SOC_DAPM_SINGLE("AIF1 Switch", _reg, 0, 1, 0), \
+}
+
+static DECLARE_ADAU1373_DSP_CHANNEL_MIXER_CTRLS(adau1373_dsp_channel1_mixer_controls,
+ ADAU1373_DIN_MIX_CTRL(0));
+static DECLARE_ADAU1373_DSP_CHANNEL_MIXER_CTRLS(adau1373_dsp_channel2_mixer_controls,
+ ADAU1373_DIN_MIX_CTRL(1));
+static DECLARE_ADAU1373_DSP_CHANNEL_MIXER_CTRLS(adau1373_dsp_channel3_mixer_controls,
+ ADAU1373_DIN_MIX_CTRL(2));
+static DECLARE_ADAU1373_DSP_CHANNEL_MIXER_CTRLS(adau1373_dsp_channel4_mixer_controls,
+ ADAU1373_DIN_MIX_CTRL(3));
+static DECLARE_ADAU1373_DSP_CHANNEL_MIXER_CTRLS(adau1373_dsp_channel5_mixer_controls,
+ ADAU1373_DIN_MIX_CTRL(4));
+
+#define DECLARE_ADAU1373_DSP_OUTPUT_MIXER_CTRLS(_name, _reg) \
+const struct snd_kcontrol_new _name[] = { \
+ SOC_DAPM_SINGLE("DSP Channel5 Switch", _reg, 4, 1, 0), \
+ SOC_DAPM_SINGLE("DSP Channel4 Switch", _reg, 3, 1, 0), \
+ SOC_DAPM_SINGLE("DSP Channel3 Switch", _reg, 2, 1, 0), \
+ SOC_DAPM_SINGLE("DSP Channel2 Switch", _reg, 1, 1, 0), \
+ SOC_DAPM_SINGLE("DSP Channel1 Switch", _reg, 0, 1, 0), \
+}
+
+static DECLARE_ADAU1373_DSP_OUTPUT_MIXER_CTRLS(adau1373_aif1_mixer_controls,
+ ADAU1373_DOUT_MIX_CTRL(0));
+static DECLARE_ADAU1373_DSP_OUTPUT_MIXER_CTRLS(adau1373_aif2_mixer_controls,
+ ADAU1373_DOUT_MIX_CTRL(1));
+static DECLARE_ADAU1373_DSP_OUTPUT_MIXER_CTRLS(adau1373_aif3_mixer_controls,
+ ADAU1373_DOUT_MIX_CTRL(2));
+static DECLARE_ADAU1373_DSP_OUTPUT_MIXER_CTRLS(adau1373_dac1_mixer_controls,
+ ADAU1373_DOUT_MIX_CTRL(3));
+static DECLARE_ADAU1373_DSP_OUTPUT_MIXER_CTRLS(adau1373_dac2_mixer_controls,
+ ADAU1373_DOUT_MIX_CTRL(4));
+
+static const struct snd_soc_dapm_widget adau1373_dapm_widgets[] = {
+ /* Datasheet claims Left ADC is bit 6 and Right ADC is bit 7, but that
+ * doesn't seem to be the case. */
+ SND_SOC_DAPM_ADC("Left ADC", NULL, ADAU1373_PWDN_CTRL1, 7, 0),
+ SND_SOC_DAPM_ADC("Right ADC", NULL, ADAU1373_PWDN_CTRL1, 6, 0),
+
+ SND_SOC_DAPM_ADC("DMIC1", NULL, ADAU1373_DIGMICCTRL, 0, 0),
+ SND_SOC_DAPM_ADC("DMIC2", NULL, ADAU1373_DIGMICCTRL, 2, 0),
+
+ SND_SOC_DAPM_VIRT_MUX("Decimator Mux", SND_SOC_NOPM, 0, 0,
+ &adau1373_decimator_mux),
+
+ SND_SOC_DAPM_SUPPLY("MICBIAS2", ADAU1373_PWDN_CTRL1, 5, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MICBIAS1", ADAU1373_PWDN_CTRL1, 4, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA("IN4PGA", ADAU1373_PWDN_CTRL1, 3, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("IN3PGA", ADAU1373_PWDN_CTRL1, 2, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("IN2PGA", ADAU1373_PWDN_CTRL1, 1, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("IN1PGA", ADAU1373_PWDN_CTRL1, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_DAC("Left DAC2", NULL, ADAU1373_PWDN_CTRL2, 7, 0),
+ SND_SOC_DAPM_DAC("Right DAC2", NULL, ADAU1373_PWDN_CTRL2, 6, 0),
+ SND_SOC_DAPM_DAC("Left DAC1", NULL, ADAU1373_PWDN_CTRL2, 5, 0),
+ SND_SOC_DAPM_DAC("Right DAC1", NULL, ADAU1373_PWDN_CTRL2, 4, 0),
+
+ SOC_MIXER_ARRAY("Left ADC Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_left_adc_mixer_controls),
+ SOC_MIXER_ARRAY("Right ADC Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_right_adc_mixer_controls),
+
+ SOC_MIXER_ARRAY("Left Lineout2 Mixer", ADAU1373_PWDN_CTRL2, 3, 0,
+ adau1373_left_line2_mixer_controls),
+ SOC_MIXER_ARRAY("Right Lineout2 Mixer", ADAU1373_PWDN_CTRL2, 2, 0,
+ adau1373_right_line2_mixer_controls),
+ SOC_MIXER_ARRAY("Left Lineout1 Mixer", ADAU1373_PWDN_CTRL2, 1, 0,
+ adau1373_left_line1_mixer_controls),
+ SOC_MIXER_ARRAY("Right Lineout1 Mixer", ADAU1373_PWDN_CTRL2, 0, 0,
+ adau1373_right_line1_mixer_controls),
+
+ SOC_MIXER_ARRAY("Earpiece Mixer", ADAU1373_PWDN_CTRL3, 4, 0,
+ adau1373_ep_mixer_controls),
+ SOC_MIXER_ARRAY("Left Speaker Mixer", ADAU1373_PWDN_CTRL3, 3, 0,
+ adau1373_left_spk_mixer_controls),
+ SOC_MIXER_ARRAY("Right Speaker Mixer", ADAU1373_PWDN_CTRL3, 2, 0,
+ adau1373_right_spk_mixer_controls),
+ SOC_MIXER_ARRAY("Left Headphone Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_left_hp_mixer_controls),
+ SOC_MIXER_ARRAY("Right Headphone Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_right_hp_mixer_controls),
+ SND_SOC_DAPM_SUPPLY("Headphone Enable", ADAU1373_PWDN_CTRL3, 1, 0,
+ NULL, 0),
+
+ SND_SOC_DAPM_SUPPLY("AIF1 CLK", ADAU1373_SRC_DAI_CTRL(0), 0, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF2 CLK", ADAU1373_SRC_DAI_CTRL(1), 0, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF3 CLK", ADAU1373_SRC_DAI_CTRL(2), 0, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF1 IN SRC", ADAU1373_SRC_DAI_CTRL(0), 2, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF1 OUT SRC", ADAU1373_SRC_DAI_CTRL(0), 1, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF2 IN SRC", ADAU1373_SRC_DAI_CTRL(1), 2, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF2 OUT SRC", ADAU1373_SRC_DAI_CTRL(1), 1, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF3 IN SRC", ADAU1373_SRC_DAI_CTRL(2), 2, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("AIF3 OUT SRC", ADAU1373_SRC_DAI_CTRL(2), 1, 0,
+ NULL, 0),
+
+ SND_SOC_DAPM_AIF_IN("AIF1 IN", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("AIF1 OUT", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("AIF2 IN", "AIF2 Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("AIF2 OUT", "AIF2 Capture", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("AIF3 IN", "AIF3 Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("AIF3 OUT", "AIF3 Capture", 0, SND_SOC_NOPM, 0, 0),
+
+ SOC_MIXER_ARRAY("DSP Channel1 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_dsp_channel1_mixer_controls),
+ SOC_MIXER_ARRAY("DSP Channel2 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_dsp_channel2_mixer_controls),
+ SOC_MIXER_ARRAY("DSP Channel3 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_dsp_channel3_mixer_controls),
+ SOC_MIXER_ARRAY("DSP Channel4 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_dsp_channel4_mixer_controls),
+ SOC_MIXER_ARRAY("DSP Channel5 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_dsp_channel5_mixer_controls),
+
+ SOC_MIXER_ARRAY("AIF1 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_aif1_mixer_controls),
+ SOC_MIXER_ARRAY("AIF2 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_aif2_mixer_controls),
+ SOC_MIXER_ARRAY("AIF3 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_aif3_mixer_controls),
+ SOC_MIXER_ARRAY("DAC1 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_dac1_mixer_controls),
+ SOC_MIXER_ARRAY("DAC2 Mixer", SND_SOC_NOPM, 0, 0,
+ adau1373_dac2_mixer_controls),
+
+ SND_SOC_DAPM_SUPPLY("DSP", ADAU1373_DIGEN, 4, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Recording Engine B", ADAU1373_DIGEN, 3, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Recording Engine A", ADAU1373_DIGEN, 2, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Playback Engine B", ADAU1373_DIGEN, 1, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Playback Engine A", ADAU1373_DIGEN, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_SUPPLY("PLL1", SND_SOC_NOPM, 0, 0, adau1373_pll_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_SUPPLY("PLL2", SND_SOC_NOPM, 0, 0, adau1373_pll_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_SUPPLY("SYSCLK1", ADAU1373_CLK_SRC_DIV(0), 7, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("SYSCLK2", ADAU1373_CLK_SRC_DIV(1), 7, 0, NULL, 0),
+
+ SND_SOC_DAPM_INPUT("AIN1L"),
+ SND_SOC_DAPM_INPUT("AIN1R"),
+ SND_SOC_DAPM_INPUT("AIN2L"),
+ SND_SOC_DAPM_INPUT("AIN2R"),
+ SND_SOC_DAPM_INPUT("AIN3L"),
+ SND_SOC_DAPM_INPUT("AIN3R"),
+ SND_SOC_DAPM_INPUT("AIN4L"),
+ SND_SOC_DAPM_INPUT("AIN4R"),
+
+ SND_SOC_DAPM_INPUT("DMIC1DAT"),
+ SND_SOC_DAPM_INPUT("DMIC2DAT"),
+
+ SND_SOC_DAPM_OUTPUT("LOUT1L"),
+ SND_SOC_DAPM_OUTPUT("LOUT1R"),
+ SND_SOC_DAPM_OUTPUT("LOUT2L"),
+ SND_SOC_DAPM_OUTPUT("LOUT2R"),
+ SND_SOC_DAPM_OUTPUT("HPL"),
+ SND_SOC_DAPM_OUTPUT("HPR"),
+ SND_SOC_DAPM_OUTPUT("SPKL"),
+ SND_SOC_DAPM_OUTPUT("SPKR"),
+ SND_SOC_DAPM_OUTPUT("EP"),
+};
+
+static int adau1373_check_aif_clk(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ struct snd_soc_codec *codec = source->codec;
+ struct adau1373 *adau1373 = snd_soc_codec_get_drvdata(codec);
+ unsigned int dai;
+ const char *clk;
+
+ dai = sink->name[3] - '1';
+
+ if (!adau1373->dais[dai].master)
+ return 0;
+
+ if (adau1373->dais[dai].clk_src == ADAU1373_CLK_SRC_PLL1)
+ clk = "SYSCLK1";
+ else
+ clk = "SYSCLK2";
+
+ return strcmp(source->name, clk) == 0;
+}
+
+static int adau1373_check_src(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ struct snd_soc_codec *codec = source->codec;
+ struct adau1373 *adau1373 = snd_soc_codec_get_drvdata(codec);
+ unsigned int dai;
+
+ dai = sink->name[3] - '1';
+
+ return adau1373->dais[dai].enable_src;
+}
+
+#define DSP_CHANNEL_MIXER_ROUTES(_sink) \
+ { _sink, "DMIC2 Swapped Switch", "DMIC2" }, \
+ { _sink, "DMIC2 Switch", "DMIC2" }, \
+ { _sink, "ADC/DMIC1 Swapped Switch", "Decimator Mux" }, \
+ { _sink, "ADC/DMIC1 Switch", "Decimator Mux" }, \
+ { _sink, "AIF1 Switch", "AIF1 IN" }, \
+ { _sink, "AIF2 Switch", "AIF2 IN" }, \
+ { _sink, "AIF3 Switch", "AIF3 IN" }
+
+#define DSP_OUTPUT_MIXER_ROUTES(_sink) \
+ { _sink, "DSP Channel1 Switch", "DSP Channel1 Mixer" }, \
+ { _sink, "DSP Channel2 Switch", "DSP Channel2 Mixer" }, \
+ { _sink, "DSP Channel3 Switch", "DSP Channel3 Mixer" }, \
+ { _sink, "DSP Channel4 Switch", "DSP Channel4 Mixer" }, \
+ { _sink, "DSP Channel5 Switch", "DSP Channel5 Mixer" }
+
+#define LEFT_OUTPUT_MIXER_ROUTES(_sink) \
+ { _sink, "Right DAC2 Switch", "Right DAC2" }, \
+ { _sink, "Left DAC2 Switch", "Left DAC2" }, \
+ { _sink, "Right DAC1 Switch", "Right DAC1" }, \
+ { _sink, "Left DAC1 Switch", "Left DAC1" }, \
+ { _sink, "Input 1 Bypass Switch", "IN1PGA" }, \
+ { _sink, "Input 2 Bypass Switch", "IN2PGA" }, \
+ { _sink, "Input 3 Bypass Switch", "IN3PGA" }, \
+ { _sink, "Input 4 Bypass Switch", "IN4PGA" }
+
+#define RIGHT_OUTPUT_MIXER_ROUTES(_sink) \
+ { _sink, "Right DAC2 Switch", "Right DAC2" }, \
+ { _sink, "Left DAC2 Switch", "Left DAC2" }, \
+ { _sink, "Right DAC1 Switch", "Right DAC1" }, \
+ { _sink, "Left DAC1 Switch", "Left DAC1" }, \
+ { _sink, "Input 1 Bypass Switch", "IN1PGA" }, \
+ { _sink, "Input 2 Bypass Switch", "IN2PGA" }, \
+ { _sink, "Input 3 Bypass Switch", "IN3PGA" }, \
+ { _sink, "Input 4 Bypass Switch", "IN4PGA" }
+
+static const struct snd_soc_dapm_route adau1373_dapm_routes[] = {
+ { "Left ADC Mixer", "DAC1 Switch", "Left DAC1" },
+ { "Left ADC Mixer", "Input 1 Switch", "IN1PGA" },
+ { "Left ADC Mixer", "Input 2 Switch", "IN2PGA" },
+ { "Left ADC Mixer", "Input 3 Switch", "IN3PGA" },
+ { "Left ADC Mixer", "Input 4 Switch", "IN4PGA" },
+
+ { "Right ADC Mixer", "DAC1 Switch", "Right DAC1" },
+ { "Right ADC Mixer", "Input 1 Switch", "IN1PGA" },
+ { "Right ADC Mixer", "Input 2 Switch", "IN2PGA" },
+ { "Right ADC Mixer", "Input 3 Switch", "IN3PGA" },
+ { "Right ADC Mixer", "Input 4 Switch", "IN4PGA" },
+
+ { "Left ADC", NULL, "Left ADC Mixer" },
+ { "Right ADC", NULL, "Right ADC Mixer" },
+
+ { "Decimator Mux", "ADC", "Left ADC" },
+ { "Decimator Mux", "ADC", "Right ADC" },
+ { "Decimator Mux", "DMIC1", "DMIC1" },
+
+ DSP_CHANNEL_MIXER_ROUTES("DSP Channel1 Mixer"),
+ DSP_CHANNEL_MIXER_ROUTES("DSP Channel2 Mixer"),
+ DSP_CHANNEL_MIXER_ROUTES("DSP Channel3 Mixer"),
+ DSP_CHANNEL_MIXER_ROUTES("DSP Channel4 Mixer"),
+ DSP_CHANNEL_MIXER_ROUTES("DSP Channel5 Mixer"),
+
+ DSP_OUTPUT_MIXER_ROUTES("AIF1 Mixer"),
+ DSP_OUTPUT_MIXER_ROUTES("AIF2 Mixer"),
+ DSP_OUTPUT_MIXER_ROUTES("AIF3 Mixer"),
+ DSP_OUTPUT_MIXER_ROUTES("DAC1 Mixer"),
+ DSP_OUTPUT_MIXER_ROUTES("DAC2 Mixer"),
+
+ { "AIF1 OUT", NULL, "AIF1 Mixer" },
+ { "AIF2 OUT", NULL, "AIF2 Mixer" },
+ { "AIF3 OUT", NULL, "AIF3 Mixer" },
+ { "Left DAC1", NULL, "DAC1 Mixer" },
+ { "Right DAC1", NULL, "DAC1 Mixer" },
+ { "Left DAC2", NULL, "DAC2 Mixer" },
+ { "Right DAC2", NULL, "DAC2 Mixer" },
+
+ LEFT_OUTPUT_MIXER_ROUTES("Left Lineout1 Mixer"),
+ RIGHT_OUTPUT_MIXER_ROUTES("Right Lineout1 Mixer"),
+ LEFT_OUTPUT_MIXER_ROUTES("Left Lineout2 Mixer"),
+ RIGHT_OUTPUT_MIXER_ROUTES("Right Lineout2 Mixer"),
+ LEFT_OUTPUT_MIXER_ROUTES("Left Speaker Mixer"),
+ RIGHT_OUTPUT_MIXER_ROUTES("Right Speaker Mixer"),
+
+ { "Left Headphone Mixer", "Left DAC2 Switch", "Left DAC2" },
+ { "Left Headphone Mixer", "Left DAC1 Switch", "Left DAC1" },
+ { "Left Headphone Mixer", "Input 1 Bypass Switch", "IN1PGA" },
+ { "Left Headphone Mixer", "Input 2 Bypass Switch", "IN2PGA" },
+ { "Left Headphone Mixer", "Input 3 Bypass Switch", "IN3PGA" },
+ { "Left Headphone Mixer", "Input 4 Bypass Switch", "IN4PGA" },
+ { "Right Headphone Mixer", "Right DAC2 Switch", "Right DAC2" },
+ { "Right Headphone Mixer", "Right DAC1 Switch", "Right DAC1" },
+ { "Right Headphone Mixer", "Input 1 Bypass Switch", "IN1PGA" },
+ { "Right Headphone Mixer", "Input 2 Bypass Switch", "IN2PGA" },
+ { "Right Headphone Mixer", "Input 3 Bypass Switch", "IN3PGA" },
+ { "Right Headphone Mixer", "Input 4 Bypass Switch", "IN4PGA" },
+
+ { "Left Headphone Mixer", NULL, "Headphone Enable" },
+ { "Right Headphone Mixer", NULL, "Headphone Enable" },
+
+ { "Earpiece Mixer", "Right DAC2 Switch", "Right DAC2" },
+ { "Earpiece Mixer", "Left DAC2 Switch", "Left DAC2" },
+ { "Earpiece Mixer", "Right DAC1 Switch", "Right DAC1" },
+ { "Earpiece Mixer", "Left DAC1 Switch", "Left DAC1" },
+ { "Earpiece Mixer", "Input 1 Bypass Switch", "IN1PGA" },
+ { "Earpiece Mixer", "Input 2 Bypass Switch", "IN2PGA" },
+ { "Earpiece Mixer", "Input 3 Bypass Switch", "IN3PGA" },
+ { "Earpiece Mixer", "Input 4 Bypass Switch", "IN4PGA" },
+
+ { "LOUT1L", NULL, "Left Lineout1 Mixer" },
+ { "LOUT1R", NULL, "Right Lineout1 Mixer" },
+ { "LOUT2L", NULL, "Left Lineout2 Mixer" },
+ { "LOUT2R", NULL, "Right Lineout2 Mixer" },
+ { "SPKL", NULL, "Left Speaker Mixer" },
+ { "SPKR", NULL, "Right Speaker Mixer" },
+ { "HPL", NULL, "Left Headphone Mixer" },
+ { "HPR", NULL, "Right Headphone Mixer" },
+ { "EP", NULL, "Earpiece Mixer" },
+
+ { "IN1PGA", NULL, "AIN1L" },
+ { "IN2PGA", NULL, "AIN2L" },
+ { "IN3PGA", NULL, "AIN3L" },
+ { "IN4PGA", NULL, "AIN4L" },
+ { "IN1PGA", NULL, "AIN1R" },
+ { "IN2PGA", NULL, "AIN2R" },
+ { "IN3PGA", NULL, "AIN3R" },
+ { "IN4PGA", NULL, "AIN4R" },
+
+ { "SYSCLK1", NULL, "PLL1" },
+ { "SYSCLK2", NULL, "PLL2" },
+
+ { "Left DAC1", NULL, "SYSCLK1" },
+ { "Right DAC1", NULL, "SYSCLK1" },
+ { "Left DAC2", NULL, "SYSCLK1" },
+ { "Right DAC2", NULL, "SYSCLK1" },
+ { "Left ADC", NULL, "SYSCLK1" },
+ { "Right ADC", NULL, "SYSCLK1" },
+
+ { "DSP", NULL, "SYSCLK1" },
+
+ { "AIF1 Mixer", NULL, "DSP" },
+ { "AIF2 Mixer", NULL, "DSP" },
+ { "AIF3 Mixer", NULL, "DSP" },
+ { "DAC1 Mixer", NULL, "DSP" },
+ { "DAC2 Mixer", NULL, "DSP" },
+ { "DAC1 Mixer", NULL, "Playback Engine A" },
+ { "DAC2 Mixer", NULL, "Playback Engine B" },
+ { "Left ADC Mixer", NULL, "Recording Engine A" },
+ { "Right ADC Mixer", NULL, "Recording Engine A" },
+
+ { "AIF1 CLK", NULL, "SYSCLK1", adau1373_check_aif_clk },
+ { "AIF2 CLK", NULL, "SYSCLK1", adau1373_check_aif_clk },
+ { "AIF3 CLK", NULL, "SYSCLK1", adau1373_check_aif_clk },
+ { "AIF1 CLK", NULL, "SYSCLK2", adau1373_check_aif_clk },
+ { "AIF2 CLK", NULL, "SYSCLK2", adau1373_check_aif_clk },
+ { "AIF3 CLK", NULL, "SYSCLK2", adau1373_check_aif_clk },
+
+ { "AIF1 IN", NULL, "AIF1 CLK" },
+ { "AIF1 OUT", NULL, "AIF1 CLK" },
+ { "AIF2 IN", NULL, "AIF2 CLK" },
+ { "AIF2 OUT", NULL, "AIF2 CLK" },
+ { "AIF3 IN", NULL, "AIF3 CLK" },
+ { "AIF3 OUT", NULL, "AIF3 CLK" },
+ { "AIF1 IN", NULL, "AIF1 IN SRC", adau1373_check_src },
+ { "AIF1 OUT", NULL, "AIF1 OUT SRC", adau1373_check_src },
+ { "AIF2 IN", NULL, "AIF2 IN SRC", adau1373_check_src },
+ { "AIF2 OUT", NULL, "AIF2 OUT SRC", adau1373_check_src },
+ { "AIF3 IN", NULL, "AIF3 IN SRC", adau1373_check_src },
+ { "AIF3 OUT", NULL, "AIF3 OUT SRC", adau1373_check_src },
+
+ { "DMIC1", NULL, "DMIC1DAT" },
+ { "DMIC1", NULL, "SYSCLK1" },
+ { "DMIC1", NULL, "Recording Engine A" },
+ { "DMIC2", NULL, "DMIC2DAT" },
+ { "DMIC2", NULL, "SYSCLK1" },
+ { "DMIC2", NULL, "Recording Engine B" },
+};
+
+static int adau1373_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct adau1373 *adau1373 = snd_soc_codec_get_drvdata(codec);
+ struct adau1373_dai *adau1373_dai = &adau1373->dais[dai->id];
+ unsigned int div;
+ unsigned int freq;
+ unsigned int ctrl;
+
+ freq = adau1373_dai->sysclk;
+
+ if (freq % params_rate(params) != 0)
+ return -EINVAL;
+
+ switch (freq / params_rate(params)) {
+ case 1024: /* sysclk / 256 */
+ div = 0;
+ break;
+ case 1536: /* 2/3 sysclk / 256 */
+ div = 1;
+ break;
+ case 2048: /* 1/2 sysclk / 256 */
+ div = 2;
+ break;
+ case 3072: /* 1/3 sysclk / 256 */
+ div = 3;
+ break;
+ case 4096: /* 1/4 sysclk / 256 */
+ div = 4;
+ break;
+ case 6144: /* 1/6 sysclk / 256 */
+ div = 5;
+ break;
+ case 5632: /* 2/11 sysclk / 256 */
+ div = 6;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ adau1373_dai->enable_src = (div != 0);
+
+ snd_soc_update_bits(codec, ADAU1373_BCLKDIV(dai->id),
+ ~ADAU1373_BCLKDIV_SOURCE, (div << 2) | ADAU1373_BCLKDIV_64);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ ctrl = ADAU1373_DAI_WLEN_16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ ctrl = ADAU1373_DAI_WLEN_20;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ ctrl = ADAU1373_DAI_WLEN_24;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ ctrl = ADAU1373_DAI_WLEN_32;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return snd_soc_update_bits(codec, ADAU1373_DAI(dai->id),
+ ADAU1373_DAI_WLEN_MASK, ctrl);
+}
+
+static int adau1373_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct adau1373 *adau1373 = snd_soc_codec_get_drvdata(codec);
+ struct adau1373_dai *adau1373_dai = &adau1373->dais[dai->id];
+ unsigned int ctrl;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ ctrl = ADAU1373_DAI_MASTER;
+ adau1373_dai->master = true;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ ctrl = 0;
+ adau1373_dai->master = false;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ ctrl |= ADAU1373_DAI_FORMAT_I2S;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ ctrl |= ADAU1373_DAI_FORMAT_LEFT_J;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ ctrl |= ADAU1373_DAI_FORMAT_RIGHT_J;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ ctrl |= ADAU1373_DAI_FORMAT_DSP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ ctrl |= ADAU1373_DAI_INVERT_BCLK;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ ctrl |= ADAU1373_DAI_INVERT_LRCLK;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ ctrl |= ADAU1373_DAI_INVERT_LRCLK | ADAU1373_DAI_INVERT_BCLK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, ADAU1373_DAI(dai->id),
+ ~ADAU1373_DAI_WLEN_MASK, ctrl);
+
+ return 0;
+}
+
+static int adau1373_set_dai_sysclk(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct adau1373 *adau1373 = snd_soc_codec_get_drvdata(dai->codec);
+ struct adau1373_dai *adau1373_dai = &adau1373->dais[dai->id];
+
+ switch (clk_id) {
+ case ADAU1373_CLK_SRC_PLL1:
+ case ADAU1373_CLK_SRC_PLL2:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ adau1373_dai->sysclk = freq;
+ adau1373_dai->clk_src = clk_id;
+
+ snd_soc_update_bits(dai->codec, ADAU1373_BCLKDIV(dai->id),
+ ADAU1373_BCLKDIV_SOURCE, clk_id << 5);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops adau1373_dai_ops = {
+ .hw_params = adau1373_hw_params,
+ .set_sysclk = adau1373_set_dai_sysclk,
+ .set_fmt = adau1373_set_dai_fmt,
+};
+
+#define ADAU1373_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver adau1373_dai_driver[] = {
+ {
+ .id = 0,
+ .name = "adau1373-aif1",
+ .playback = {
+ .stream_name = "AIF1 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = ADAU1373_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF1 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = ADAU1373_FORMATS,
+ },
+ .ops = &adau1373_dai_ops,
+ .symmetric_rates = 1,
+ },
+ {
+ .id = 1,
+ .name = "adau1373-aif2",
+ .playback = {
+ .stream_name = "AIF2 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = ADAU1373_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF2 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = ADAU1373_FORMATS,
+ },
+ .ops = &adau1373_dai_ops,
+ .symmetric_rates = 1,
+ },
+ {
+ .id = 2,
+ .name = "adau1373-aif3",
+ .playback = {
+ .stream_name = "AIF3 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = ADAU1373_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF3 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = ADAU1373_FORMATS,
+ },
+ .ops = &adau1373_dai_ops,
+ .symmetric_rates = 1,
+ },
+};
+
+static int adau1373_set_pll(struct snd_soc_codec *codec, int pll_id,
+ int source, unsigned int freq_in, unsigned int freq_out)
+{
+ unsigned int dpll_div = 0;
+ unsigned int x, r, n, m, i, j, mode;
+
+ switch (pll_id) {
+ case ADAU1373_PLL1:
+ case ADAU1373_PLL2:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case ADAU1373_PLL_SRC_BCLK1:
+ case ADAU1373_PLL_SRC_BCLK2:
+ case ADAU1373_PLL_SRC_BCLK3:
+ case ADAU1373_PLL_SRC_LRCLK1:
+ case ADAU1373_PLL_SRC_LRCLK2:
+ case ADAU1373_PLL_SRC_LRCLK3:
+ case ADAU1373_PLL_SRC_MCLK1:
+ case ADAU1373_PLL_SRC_MCLK2:
+ case ADAU1373_PLL_SRC_GPIO1:
+ case ADAU1373_PLL_SRC_GPIO2:
+ case ADAU1373_PLL_SRC_GPIO3:
+ case ADAU1373_PLL_SRC_GPIO4:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (freq_in < 7813 || freq_in > 27000000)
+ return -EINVAL;
+
+ if (freq_out < 45158000 || freq_out > 49152000)
+ return -EINVAL;
+
+ /* APLL input needs to be >= 8Mhz, so in case freq_in is less we use the
+ * DPLL to get it there. DPLL_out = (DPLL_in / div) * 1024 */
+ while (freq_in < 8000000) {
+ freq_in *= 2;
+ dpll_div++;
+ }
+
+ if (freq_out % freq_in != 0) {
+ /* fout = fin * (r + (n/m)) / x */
+ x = DIV_ROUND_UP(freq_in, 13500000);
+ freq_in /= x;
+ r = freq_out / freq_in;
+ i = freq_out % freq_in;
+ j = gcd(i, freq_in);
+ n = i / j;
+ m = freq_in / j;
+ x--;
+ mode = 1;
+ } else {
+ /* fout = fin / r */
+ r = freq_out / freq_in;
+ n = 0;
+ m = 0;
+ x = 0;
+ mode = 0;
+ }
+
+ if (r < 2 || r > 8 || x > 3 || m > 0xffff || n > 0xffff)
+ return -EINVAL;
+
+ if (dpll_div) {
+ dpll_div = 11 - dpll_div;
+ snd_soc_update_bits(codec, ADAU1373_PLL_CTRL6(pll_id),
+ ADAU1373_PLL_CTRL6_DPLL_BYPASS, 0);
+ } else {
+ snd_soc_update_bits(codec, ADAU1373_PLL_CTRL6(pll_id),
+ ADAU1373_PLL_CTRL6_DPLL_BYPASS,
+ ADAU1373_PLL_CTRL6_DPLL_BYPASS);
+ }
+
+ snd_soc_write(codec, ADAU1373_DPLL_CTRL(pll_id),
+ (source << 4) | dpll_div);
+ snd_soc_write(codec, ADAU1373_PLL_CTRL1(pll_id), (m >> 8) & 0xff);
+ snd_soc_write(codec, ADAU1373_PLL_CTRL2(pll_id), m & 0xff);
+ snd_soc_write(codec, ADAU1373_PLL_CTRL3(pll_id), (n >> 8) & 0xff);
+ snd_soc_write(codec, ADAU1373_PLL_CTRL4(pll_id), n & 0xff);
+ snd_soc_write(codec, ADAU1373_PLL_CTRL5(pll_id),
+ (r << 3) | (x << 1) | mode);
+
+ /* Set sysclk to pll_rate / 4 */
+ snd_soc_update_bits(codec, ADAU1373_CLK_SRC_DIV(pll_id), 0x3f, 0x09);
+
+ return 0;
+}
+
+static void adau1373_load_drc_settings(struct snd_soc_codec *codec,
+ unsigned int nr, uint8_t *drc)
+{
+ unsigned int i;
+
+ for (i = 0; i < ADAU1373_DRC_SIZE; ++i)
+ snd_soc_write(codec, ADAU1373_DRC(nr) + i, drc[i]);
+}
+
+static bool adau1373_valid_micbias(enum adau1373_micbias_voltage micbias)
+{
+ switch (micbias) {
+ case ADAU1373_MICBIAS_2_9V:
+ case ADAU1373_MICBIAS_2_2V:
+ case ADAU1373_MICBIAS_2_6V:
+ case ADAU1373_MICBIAS_1_8V:
+ return true;
+ default:
+ break;
+ }
+ return false;
+}
+
+static int adau1373_probe(struct snd_soc_codec *codec)
+{
+ struct adau1373_platform_data *pdata = codec->dev->platform_data;
+ bool lineout_differential = false;
+ unsigned int val;
+ int ret;
+ int i;
+
+ ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
+ if (ret) {
+ dev_err(codec->dev, "failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ codec->dapm.idle_bias_off = true;
+
+ if (pdata) {
+ if (pdata->num_drc > ARRAY_SIZE(pdata->drc_setting))
+ return -EINVAL;
+
+ if (!adau1373_valid_micbias(pdata->micbias1) ||
+ !adau1373_valid_micbias(pdata->micbias2))
+ return -EINVAL;
+
+ for (i = 0; i < pdata->num_drc; ++i) {
+ adau1373_load_drc_settings(codec, i,
+ pdata->drc_setting[i]);
+ }
+
+ snd_soc_add_controls(codec, adau1373_drc_controls,
+ pdata->num_drc);
+
+ val = 0;
+ for (i = 0; i < 4; ++i) {
+ if (pdata->input_differential[i])
+ val |= BIT(i);
+ }
+ snd_soc_write(codec, ADAU1373_INPUT_MODE, val);
+
+ val = 0;
+ if (pdata->lineout_differential)
+ val |= ADAU1373_OUTPUT_CTRL_LDIFF;
+ if (pdata->lineout_ground_sense)
+ val |= ADAU1373_OUTPUT_CTRL_LNFBEN;
+ snd_soc_write(codec, ADAU1373_OUTPUT_CTRL, val);
+
+ lineout_differential = pdata->lineout_differential;
+
+ snd_soc_write(codec, ADAU1373_EP_CTRL,
+ (pdata->micbias1 << ADAU1373_EP_CTRL_MICBIAS1_OFFSET) |
+ (pdata->micbias2 << ADAU1373_EP_CTRL_MICBIAS2_OFFSET));
+ }
+
+ if (!lineout_differential) {
+ snd_soc_add_controls(codec, adau1373_lineout2_controls,
+ ARRAY_SIZE(adau1373_lineout2_controls));
+ }
+
+ snd_soc_write(codec, ADAU1373_ADC_CTRL,
+ ADAU1373_ADC_CTRL_RESET_FORCE | ADAU1373_ADC_CTRL_PEAK_DETECT);
+
+ return 0;
+}
+
+static int adau1373_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ snd_soc_update_bits(codec, ADAU1373_PWDN_CTRL3,
+ ADAU1373_PWDN_CTRL3_PWR_EN, ADAU1373_PWDN_CTRL3_PWR_EN);
+ break;
+ case SND_SOC_BIAS_OFF:
+ snd_soc_update_bits(codec, ADAU1373_PWDN_CTRL3,
+ ADAU1373_PWDN_CTRL3_PWR_EN, 0);
+ break;
+ }
+ codec->dapm.bias_level = level;
+ return 0;
+}
+
+static int adau1373_remove(struct snd_soc_codec *codec)
+{
+ adau1373_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int adau1373_suspend(struct snd_soc_codec *codec, pm_message_t state)
+{
+ return adau1373_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int adau1373_resume(struct snd_soc_codec *codec)
+{
+ adau1373_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ snd_soc_cache_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_codec_driver adau1373_codec_driver = {
+ .probe = adau1373_probe,
+ .remove = adau1373_remove,
+ .suspend = adau1373_suspend,
+ .resume = adau1373_resume,
+ .set_bias_level = adau1373_set_bias_level,
+ .reg_cache_size = ARRAY_SIZE(adau1373_default_regs),
+ .reg_cache_default = adau1373_default_regs,
+ .reg_word_size = sizeof(uint8_t),
+
+ .set_pll = adau1373_set_pll,
+
+ .controls = adau1373_controls,
+ .num_controls = ARRAY_SIZE(adau1373_controls),
+ .dapm_widgets = adau1373_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(adau1373_dapm_widgets),
+ .dapm_routes = adau1373_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(adau1373_dapm_routes),
+};
+
+static int __devinit adau1373_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adau1373 *adau1373;
+ int ret;
+
+ adau1373 = kzalloc(sizeof(*adau1373), GFP_KERNEL);
+ if (!adau1373)
+ return -ENOMEM;
+
+ dev_set_drvdata(&client->dev, adau1373);
+
+ ret = snd_soc_register_codec(&client->dev, &adau1373_codec_driver,
+ adau1373_dai_driver, ARRAY_SIZE(adau1373_dai_driver));
+ if (ret < 0)
+ kfree(adau1373);
+
+ return ret;
+}
+
+static int __devexit adau1373_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ kfree(dev_get_drvdata(&client->dev));
+ return 0;
+}
+
+static const struct i2c_device_id adau1373_i2c_id[] = {
+ { "adau1373", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adau1373_i2c_id);
+
+static struct i2c_driver adau1373_i2c_driver = {
+ .driver = {
+ .name = "adau1373",
+ .owner = THIS_MODULE,
+ },
+ .probe = adau1373_i2c_probe,
+ .remove = __devexit_p(adau1373_i2c_remove),
+ .id_table = adau1373_i2c_id,
+};
+
+static int __init adau1373_init(void)
+{
+ return i2c_add_driver(&adau1373_i2c_driver);
+}
+module_init(adau1373_init);
+
+static void __exit adau1373_exit(void)
+{
+ i2c_del_driver(&adau1373_i2c_driver);
+}
+module_exit(adau1373_exit);
+
+MODULE_DESCRIPTION("ASoC ADAU1373 driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/adau1373.h b/sound/soc/codecs/adau1373.h
new file mode 100644
index 0000000..c6ab553
--- /dev/null
+++ b/sound/soc/codecs/adau1373.h
@@ -0,0 +1,29 @@
+#ifndef __ADAU1373_H__
+#define __ADAU1373_H__
+
+enum adau1373_pll_src {
+ ADAU1373_PLL_SRC_MCLK1 = 0,
+ ADAU1373_PLL_SRC_BCLK1 = 1,
+ ADAU1373_PLL_SRC_BCLK2 = 2,
+ ADAU1373_PLL_SRC_BCLK3 = 3,
+ ADAU1373_PLL_SRC_LRCLK1 = 4,
+ ADAU1373_PLL_SRC_LRCLK2 = 5,
+ ADAU1373_PLL_SRC_LRCLK3 = 6,
+ ADAU1373_PLL_SRC_GPIO1 = 7,
+ ADAU1373_PLL_SRC_GPIO2 = 8,
+ ADAU1373_PLL_SRC_GPIO3 = 9,
+ ADAU1373_PLL_SRC_GPIO4 = 10,
+ ADAU1373_PLL_SRC_MCLK2 = 11,
+};
+
+enum adau1373_pll {
+ ADAU1373_PLL1 = 0,
+ ADAU1373_PLL2 = 1,
+};
+
+enum adau1373_clk_src {
+ ADAU1373_CLK_SRC_PLL1 = 0,
+ ADAU1373_CLK_SRC_PLL2 = 1,
+};
+
+#endif
diff --git a/sound/soc/codecs/adau1701.c b/sound/soc/codecs/adau1701.c
index 2758d5f..8b7e1c5 100644
--- a/sound/soc/codecs/adau1701.c
+++ b/sound/soc/codecs/adau1701.c
@@ -401,7 +401,7 @@
}
static int adau1701_set_sysclk(struct snd_soc_codec *codec, int clk_id,
- unsigned int freq, int dir)
+ int source, unsigned int freq, int dir)
{
unsigned int val;
@@ -458,6 +458,7 @@
int ret;
codec->dapm.idle_bias_off = 1;
+ codec->control_data = to_i2c_client(codec->dev);
ret = adau1701_load_firmware(codec);
if (ret)
diff --git a/sound/soc/codecs/adav80x.c b/sound/soc/codecs/adav80x.c
index 300c04b..f9f0894 100644
--- a/sound/soc/codecs/adav80x.c
+++ b/sound/soc/codecs/adav80x.c
@@ -523,7 +523,8 @@
}
static int adav80x_set_sysclk(struct snd_soc_codec *codec,
- int clk_id, unsigned int freq, int dir)
+ int clk_id, int source,
+ unsigned int freq, int dir)
{
struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
diff --git a/sound/soc/codecs/ads117x.h b/sound/soc/codecs/ads117x.h
deleted file mode 100644
index 3ce0286..0000000
--- a/sound/soc/codecs/ads117x.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * ads117x.h -- Driver for ads1174/8 ADC chips
- *
- * Copyright 2009 ShotSpotter Inc.
- * Author: Graeme Gregory <gg@slimlogic.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-extern struct snd_soc_dai_driver ads117x_dai;
-extern struct snd_soc_codec_driver soc_codec_dev_ads117x;
diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c
index cbf0b6d..d3b29dc 100644
--- a/sound/soc/codecs/ak4104.c
+++ b/sound/soc/codecs/ak4104.c
@@ -247,7 +247,7 @@
.probe = ak4104_probe,
.remove = ak4104_remove,
.reg_cache_size = AK4104_NUM_REGS,
- .reg_word_size = sizeof(u16),
+ .reg_word_size = sizeof(u8),
};
static int ak4104_spi_probe(struct spi_device *spi)
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c
index e1a214e..95d782d 100644
--- a/sound/soc/codecs/ak4535.c
+++ b/sound/soc/codecs/ak4535.c
@@ -34,74 +34,16 @@
struct ak4535_priv {
unsigned int sysclk;
enum snd_soc_control_type control_type;
- void *control_data;
};
/*
* ak4535 register cache
*/
-static const u16 ak4535_reg[AK4535_CACHEREGNUM] = {
- 0x0000, 0x0080, 0x0000, 0x0003,
- 0x0002, 0x0000, 0x0011, 0x0001,
- 0x0000, 0x0040, 0x0036, 0x0010,
- 0x0000, 0x0000, 0x0057, 0x0000,
-};
-
-/*
- * read ak4535 register cache
- */
-static inline unsigned int ak4535_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= AK4535_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write ak4535 register cache
- */
-static inline void ak4535_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= AK4535_CACHEREGNUM)
- return;
- cache[reg] = value;
-}
-
-/*
- * write to the AK4535 register space
- */
-static int ak4535_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D8 AK4535 register offset
- * D7...D0 register data
- */
- data[0] = reg & 0xff;
- data[1] = value & 0xff;
-
- ak4535_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-static int ak4535_sync(struct snd_soc_codec *codec)
-{
- u16 *cache = codec->reg_cache;
- int i, r = 0;
-
- for (i = 0; i < AK4535_CACHEREGNUM; i++)
- r |= ak4535_write(codec, i, cache[i]);
-
- return r;
+static const u8 ak4535_reg[AK4535_CACHEREGNUM] = {
+ 0x00, 0x80, 0x00, 0x03,
+ 0x02, 0x00, 0x11, 0x01,
+ 0x00, 0x40, 0x36, 0x10,
+ 0x00, 0x00, 0x57, 0x00,
};
static const char *ak4535_mono_gain[] = {"+6dB", "-17dB"};
@@ -304,7 +246,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct ak4535_priv *ak4535 = snd_soc_codec_get_drvdata(codec);
- u8 mode2 = ak4535_read_reg_cache(codec, AK4535_MODE2) & ~(0x3 << 5);
+ u8 mode2 = snd_soc_read(codec, AK4535_MODE2) & ~(0x3 << 5);
int rate = params_rate(params), fs = 256;
if (rate)
@@ -323,7 +265,7 @@
}
/* set rate */
- ak4535_write(codec, AK4535_MODE2, mode2);
+ snd_soc_write(codec, AK4535_MODE2, mode2);
return 0;
}
@@ -348,44 +290,37 @@
/* use 32 fs for BCLK to save power */
mode1 |= 0x4;
- ak4535_write(codec, AK4535_MODE1, mode1);
+ snd_soc_write(codec, AK4535_MODE1, mode1);
return 0;
}
static int ak4535_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC);
+ u16 mute_reg = snd_soc_read(codec, AK4535_DAC);
if (!mute)
- ak4535_write(codec, AK4535_DAC, mute_reg & ~0x20);
+ snd_soc_write(codec, AK4535_DAC, mute_reg & ~0x20);
else
- ak4535_write(codec, AK4535_DAC, mute_reg | 0x20);
+ snd_soc_write(codec, AK4535_DAC, mute_reg | 0x20);
return 0;
}
static int ak4535_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 i, mute_reg;
-
switch (level) {
case SND_SOC_BIAS_ON:
- mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC);
- ak4535_write(codec, AK4535_DAC, mute_reg & ~0x20);
+ snd_soc_update_bits(codec, AK4535_DAC, 0x20, 0);
break;
case SND_SOC_BIAS_PREPARE:
- mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC);
- ak4535_write(codec, AK4535_DAC, mute_reg | 0x20);
+ snd_soc_update_bits(codec, AK4535_DAC, 0x20, 0x20);
break;
case SND_SOC_BIAS_STANDBY:
- i = ak4535_read_reg_cache(codec, AK4535_PM1);
- ak4535_write(codec, AK4535_PM1, i | 0x80);
- i = ak4535_read_reg_cache(codec, AK4535_PM2);
- ak4535_write(codec, AK4535_PM2, i & (~0x80));
+ snd_soc_update_bits(codec, AK4535_PM1, 0x80, 0x80);
+ snd_soc_update_bits(codec, AK4535_PM2, 0x80, 0);
break;
case SND_SOC_BIAS_OFF:
- i = ak4535_read_reg_cache(codec, AK4535_PM1);
- ak4535_write(codec, AK4535_PM1, i & (~0x80));
+ snd_soc_update_bits(codec, AK4535_PM1, 0x80, 0);
break;
}
codec->dapm.bias_level = level;
@@ -428,7 +363,7 @@
static int ak4535_resume(struct snd_soc_codec *codec)
{
- ak4535_sync(codec);
+ snd_soc_cache_sync(codec);
ak4535_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
}
@@ -436,11 +371,15 @@
static int ak4535_probe(struct snd_soc_codec *codec)
{
struct ak4535_priv *ak4535 = snd_soc_codec_get_drvdata(codec);
+ int ret;
printk(KERN_INFO "AK4535 Audio Codec %s", AK4535_VERSION);
- codec->control_data = ak4535->control_data;
-
+ ret = snd_soc_codec_set_cache_io(codec, 8, 8, ak4535->control_type);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
/* power on device */
ak4535_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -461,8 +400,6 @@
.remove = ak4535_remove,
.suspend = ak4535_suspend,
.resume = ak4535_resume,
- .read = ak4535_read_reg_cache,
- .write = ak4535_write,
.set_bias_level = ak4535_set_bias_level,
.reg_cache_size = ARRAY_SIZE(ak4535_reg),
.reg_word_size = sizeof(u8),
@@ -485,7 +422,6 @@
return -ENOMEM;
i2c_set_clientdata(i2c, ak4535);
- ak4535->control_data = i2c;
ak4535->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/ak4641.c b/sound/soc/codecs/ak4641.c
index 7a64e58..7783858 100644
--- a/sound/soc/codecs/ak4641.c
+++ b/sound/soc/codecs/ak4641.c
@@ -31,7 +31,6 @@
/* codec private data */
struct ak4641_priv {
- struct snd_soc_codec *codec;
unsigned int sysclk;
int deemph;
int playback_fs;
@@ -226,7 +225,7 @@
SND_SOC_DAPM_PGA("Mono Out 2", AK4641_PM2, 3, 0, NULL, 0),
SND_SOC_DAPM_ADC("Voice ADC", "Voice Capture", AK4641_BTIF, 0, 0),
- SND_SOC_DAPM_ADC("Voice DAC", "Voice Playback", AK4641_BTIF, 1, 0),
+ SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AK4641_BTIF, 1, 0),
SND_SOC_DAPM_MICBIAS("Mic Int Bias", AK4641_MIC, 3, 0),
SND_SOC_DAPM_MICBIAS("Mic Ext Bias", AK4641_MIC, 4, 0),
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
index 65f46047b..d8fc044 100644
--- a/sound/soc/codecs/ak4642.c
+++ b/sound/soc/codecs/ak4642.c
@@ -156,81 +156,22 @@
struct ak4642_priv {
unsigned int sysclk;
enum snd_soc_control_type control_type;
- void *control_data;
};
/*
* ak4642 register cache
*/
-static const u16 ak4642_reg[AK4642_CACHEREGNUM] = {
- 0x0000, 0x0000, 0x0001, 0x0000,
- 0x0002, 0x0000, 0x0000, 0x0000,
- 0x00e1, 0x00e1, 0x0018, 0x0000,
- 0x00e1, 0x0018, 0x0011, 0x0008,
- 0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000,
-};
-
-/*
- * read ak4642 register cache
- */
-static inline unsigned int ak4642_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= AK4642_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write ak4642 register cache
- */
-static inline void ak4642_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= AK4642_CACHEREGNUM)
- return;
-
- cache[reg] = value;
-}
-
-/*
- * write to the AK4642 register space
- */
-static int ak4642_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D8 AK4642 register offset
- * D7...D0 register data
- */
- data[0] = reg & 0xff;
- data[1] = value & 0xff;
-
- if (codec->hw_write(codec->control_data, data, 2) == 2) {
- ak4642_write_reg_cache(codec, reg, value);
- return 0;
- } else
- return -EIO;
-}
-
-static int ak4642_sync(struct snd_soc_codec *codec)
-{
- u16 *cache = codec->reg_cache;
- int i, r = 0;
-
- for (i = 0; i < AK4642_CACHEREGNUM; i++)
- r |= ak4642_write(codec, i, cache[i]);
-
- return r;
+static const u8 ak4642_reg[AK4642_CACHEREGNUM] = {
+ 0x00, 0x00, 0x01, 0x00,
+ 0x02, 0x00, 0x00, 0x00,
+ 0xe1, 0xe1, 0x18, 0x00,
+ 0xe1, 0x18, 0x11, 0x08,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00,
};
static int ak4642_dai_startup(struct snd_pcm_substream *substream,
@@ -252,8 +193,8 @@
*/
snd_soc_update_bits(codec, MD_CTL4, DACH, DACH);
snd_soc_update_bits(codec, MD_CTL3, BST1, BST1);
- ak4642_write(codec, L_IVC, 0x91); /* volume */
- ak4642_write(codec, R_IVC, 0x91); /* volume */
+ snd_soc_write(codec, L_IVC, 0x91); /* volume */
+ snd_soc_write(codec, R_IVC, 0x91); /* volume */
snd_soc_update_bits(codec, PW_MGMT1, PMVCM | PMMIN | PMDAC,
PMVCM | PMMIN | PMDAC);
snd_soc_update_bits(codec, PW_MGMT2, PMHP_MASK, PMHP);
@@ -272,9 +213,9 @@
* This operation came from example code of
* "ASAHI KASEI AK4642" (japanese) manual p94.
*/
- ak4642_write(codec, SG_SL1, PMMP | MGAIN0);
- ak4642_write(codec, TIMER, ZTM(0x3) | WTM(0x3));
- ak4642_write(codec, ALC_CTL1, ALC | LMTH0);
+ snd_soc_write(codec, SG_SL1, PMMP | MGAIN0);
+ snd_soc_write(codec, TIMER, ZTM(0x3) | WTM(0x3));
+ snd_soc_write(codec, ALC_CTL1, ALC | LMTH0);
snd_soc_update_bits(codec, PW_MGMT1, PMVCM | PMADL,
PMVCM | PMADL);
snd_soc_update_bits(codec, PW_MGMT3, PMADR, PMADR);
@@ -462,7 +403,7 @@
static int ak4642_resume(struct snd_soc_codec *codec)
{
- ak4642_sync(codec);
+ snd_soc_cache_sync(codec);
return 0;
}
@@ -470,11 +411,15 @@
static int ak4642_probe(struct snd_soc_codec *codec)
{
struct ak4642_priv *ak4642 = snd_soc_codec_get_drvdata(codec);
+ int ret;
dev_info(codec->dev, "AK4642 Audio Codec %s", AK4642_VERSION);
- codec->hw_write = (hw_write_t)i2c_master_send;
- codec->control_data = ak4642->control_data;
+ ret = snd_soc_codec_set_cache_io(codec, 8, 8, ak4642->control_type);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
snd_soc_add_controls(codec, ak4642_snd_controls,
ARRAY_SIZE(ak4642_snd_controls));
@@ -485,8 +430,6 @@
static struct snd_soc_codec_driver soc_codec_dev_ak4642 = {
.probe = ak4642_probe,
.resume = ak4642_resume,
- .read = ak4642_read_reg_cache,
- .write = ak4642_write,
.reg_cache_size = ARRAY_SIZE(ak4642_reg),
.reg_word_size = sizeof(u8),
.reg_cache_default = ak4642_reg,
@@ -504,7 +447,6 @@
return -ENOMEM;
i2c_set_clientdata(i2c, ak4642);
- ak4642->control_data = i2c;
ak4642->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/ak4671.c b/sound/soc/codecs/ak4671.c
index 88b29f8..de9ff66 100644
--- a/sound/soc/codecs/ak4671.c
+++ b/sound/soc/codecs/ak4671.c
@@ -26,7 +26,6 @@
/* codec private data */
struct ak4671_priv {
enum snd_soc_control_type control_type;
- void *control_data;
};
/* ak4671 register cache & default register settings */
@@ -169,18 +168,15 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- u8 reg;
switch (event) {
case SND_SOC_DAPM_POST_PMU:
- reg = snd_soc_read(codec, AK4671_LOUT2_POWER_MANAGERMENT);
- reg |= AK4671_MUTEN;
- snd_soc_write(codec, AK4671_LOUT2_POWER_MANAGERMENT, reg);
+ snd_soc_update_bits(codec, AK4671_LOUT2_POWER_MANAGERMENT,
+ AK4671_MUTEN, AK4671_MUTEN);
break;
case SND_SOC_DAPM_PRE_PMD:
- reg = snd_soc_read(codec, AK4671_LOUT2_POWER_MANAGERMENT);
- reg &= ~AK4671_MUTEN;
- snd_soc_write(codec, AK4671_LOUT2_POWER_MANAGERMENT, reg);
+ snd_soc_update_bits(codec, AK4671_LOUT2_POWER_MANAGERMENT,
+ AK4671_MUTEN, 0);
break;
}
@@ -576,15 +572,12 @@
static int ak4671_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u8 reg;
-
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
case SND_SOC_BIAS_STANDBY:
- reg = snd_soc_read(codec, AK4671_AD_DA_POWER_MANAGEMENT);
- snd_soc_write(codec, AK4671_AD_DA_POWER_MANAGEMENT,
- reg | AK4671_PMVCM);
+ snd_soc_update_bits(codec, AK4671_AD_DA_POWER_MANAGEMENT,
+ AK4671_PMVCM, AK4671_PMVCM);
break;
case SND_SOC_BIAS_OFF:
snd_soc_write(codec, AK4671_AD_DA_POWER_MANAGEMENT, 0x00);
@@ -629,8 +622,6 @@
struct ak4671_priv *ak4671 = snd_soc_codec_get_drvdata(codec);
int ret;
- codec->hw_write = (hw_write_t)i2c_master_send;
-
ret = snd_soc_codec_set_cache_io(codec, 8, 8, ak4671->control_type);
if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
@@ -675,7 +666,6 @@
return -ENOMEM;
i2c_set_clientdata(client, ak4671);
- ak4671->control_data = client;
ak4671->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&client->dev,
diff --git a/sound/soc/codecs/alc5623.c b/sound/soc/codecs/alc5623.c
index eecffb5..984b14b 100644
--- a/sound/soc/codecs/alc5623.c
+++ b/sound/soc/codecs/alc5623.c
@@ -40,8 +40,6 @@
/* codec private data */
struct alc5623_priv {
enum snd_soc_control_type control_type;
- void *control_data;
- struct mutex mutex;
u8 id;
unsigned int sysclk;
u16 reg_cache[ALC5623_VENDOR_ID2+2];
@@ -55,8 +53,10 @@
u16 *cache = codec->reg_cache;
/* not really efficient ... */
+ codec->cache_bypass = 1;
for (i = 0 ; i < codec->driver->reg_cache_size ; i += step)
- cache[i] = codec->hw_read(codec, i);
+ cache[i] = snd_soc_read(codec, i);
+ codec->cache_bypass = 0;
}
static inline int alc5623_reset(struct snd_soc_codec *codec)
@@ -1050,9 +1050,7 @@
}
i2c_set_clientdata(client, alc5623);
- alc5623->control_data = client;
alc5623->control_type = SND_SOC_I2C;
- mutex_init(&alc5623->mutex);
ret = snd_soc_register_codec(&client->dev,
&soc_codec_device_alc5623, &alc5623_dai, 1);
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 6cc8678..f1f237e 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -128,7 +128,6 @@
/* Private data for the CS4270 */
struct cs4270_private {
enum snd_soc_control_type control_type;
- void *control_data;
unsigned int mclk; /* Input frequency of the MCLK pin */
unsigned int mode; /* The mode (I2S or left-justified) */
unsigned int slave_mode;
@@ -262,7 +261,6 @@
{
struct snd_soc_codec *codec = codec_dai->codec;
struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
- int ret = 0;
/* set DAI format */
switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
@@ -272,7 +270,7 @@
break;
default:
dev_err(codec->dev, "invalid dai format\n");
- ret = -EINVAL;
+ return -EINVAL;
}
/* set master/slave audio interface */
@@ -285,10 +283,11 @@
break;
default:
/* all other modes are unsupported by the hardware */
- ret = -EINVAL;
+ dev_err(codec->dev, "Unknown master/slave configuration\n");
+ return -EINVAL;
}
- return ret;
+ return 0;
}
/**
@@ -490,8 +489,6 @@
struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
int i, ret;
- codec->control_data = cs4270->control_data;
-
/* Tell ASoC what kind of I/O to use to read the registers. ASoC will
* then do the I2C transactions itself.
*/
@@ -604,7 +601,7 @@
static int cs4270_soc_resume(struct snd_soc_codec *codec)
{
struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
- struct i2c_client *i2c_client = codec->control_data;
+ struct i2c_client *i2c_client = to_i2c_client(codec->dev);
int reg;
regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
@@ -690,7 +687,6 @@
}
i2c_set_clientdata(i2c_client, cs4270);
- cs4270->control_data = i2c_client;
cs4270->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c_client->dev,
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index 083aab9..23d1bd5 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -156,7 +156,6 @@
struct cs4271_private {
/* SND_SOC_I2C or SND_SOC_SPI */
enum snd_soc_control_type bus_type;
- void *control_data;
unsigned int mclk;
bool master;
bool deemph;
@@ -466,8 +465,6 @@
int ret;
int gpio_nreset = -EINVAL;
- codec->control_data = cs4271->control_data;
-
if (cs4271plat && gpio_is_valid(cs4271plat->gpio_nreset))
gpio_nreset = cs4271plat->gpio_nreset;
@@ -555,7 +552,6 @@
return -ENOMEM;
spi_set_drvdata(spi, cs4271);
- cs4271->control_data = spi;
cs4271->bus_type = SND_SOC_SPI;
return snd_soc_register_codec(&spi->dev, &soc_codec_dev_cs4271,
@@ -595,7 +591,6 @@
return -ENOMEM;
i2c_set_clientdata(client, cs4271);
- cs4271->control_data = client;
cs4271->bus_type = SND_SOC_I2C;
return snd_soc_register_codec(&client->dev, &soc_codec_dev_cs4271,
diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index 8fb7070..8c3c820 100644
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -42,7 +42,6 @@
struct cs42l51_private {
enum snd_soc_control_type control_type;
- void *control_data;
unsigned int mclk;
unsigned int audio_mode; /* The mode (I2S or left-justified) */
enum master_slave_mode func;
@@ -57,7 +56,7 @@
static int cs42l51_fill_cache(struct snd_soc_codec *codec)
{
u8 *cache = codec->reg_cache + 1;
- struct i2c_client *i2c_client = codec->control_data;
+ struct i2c_client *i2c_client = to_i2c_client(codec->dev);
s32 length;
length = i2c_smbus_read_i2c_block_data(i2c_client,
@@ -289,7 +288,6 @@
{
struct snd_soc_codec *codec = codec_dai->codec;
struct cs42l51_private *cs42l51 = snd_soc_codec_get_drvdata(codec);
- int ret = 0;
switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
@@ -299,7 +297,7 @@
break;
default:
dev_err(codec->dev, "invalid DAI format\n");
- ret = -EINVAL;
+ return -EINVAL;
}
switch (format & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -310,11 +308,11 @@
cs42l51->func = MODE_SLAVE_AUTO;
break;
default:
- ret = -EINVAL;
- break;
+ dev_err(codec->dev, "Unknown master/slave configuration\n");
+ return -EINVAL;
}
- return ret;
+ return 0;
}
struct cs42l51_ratios {
@@ -520,8 +518,6 @@
struct snd_soc_dapm_context *dapm = &codec->dapm;
int ret, reg;
- codec->control_data = cs42l51->control_data;
-
ret = cs42l51_fill_cache(codec);
if (ret < 0) {
dev_err(codec->dev, "failed to fill register cache\n");
@@ -593,7 +589,6 @@
}
i2c_set_clientdata(i2c_client, cs42l51);
- cs42l51->control_data = i2c_client;
cs42l51->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c_client->dev,
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index 92fd9d7..0ebcbd5 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -26,23 +26,41 @@
#include <sound/tlv.h>
/* DA7210 register space */
+#define DA7210_CONTROL 0x01
#define DA7210_STATUS 0x02
#define DA7210_STARTUP1 0x03
+#define DA7210_STARTUP2 0x04
+#define DA7210_STARTUP3 0x05
#define DA7210_MIC_L 0x07
#define DA7210_MIC_R 0x08
+#define DA7210_AUX1_L 0x09
+#define DA7210_AUX1_R 0x0A
+#define DA7210_AUX2 0x0B
+#define DA7210_IN_GAIN 0x0C
#define DA7210_INMIX_L 0x0D
#define DA7210_INMIX_R 0x0E
#define DA7210_ADC_HPF 0x0F
#define DA7210_ADC 0x10
+#define DA7210_ADC_EQ1_2 0X11
+#define DA7210_ADC_EQ3_4 0x12
+#define DA7210_ADC_EQ5 0x13
#define DA7210_DAC_HPF 0x14
#define DA7210_DAC_L 0x15
#define DA7210_DAC_R 0x16
#define DA7210_DAC_SEL 0x17
+#define DA7210_SOFTMUTE 0x18
+#define DA7210_DAC_EQ1_2 0x19
+#define DA7210_DAC_EQ3_4 0x1A
+#define DA7210_DAC_EQ5 0x1B
#define DA7210_OUTMIX_L 0x1C
#define DA7210_OUTMIX_R 0x1D
+#define DA7210_OUT1_L 0x1E
+#define DA7210_OUT1_R 0x1F
+#define DA7210_OUT2 0x20
#define DA7210_HP_L_VOL 0x21
#define DA7210_HP_R_VOL 0x22
#define DA7210_HP_CFG 0x23
+#define DA7210_ZERO_CROSS 0x24
#define DA7210_DAI_SRC_SEL 0x25
#define DA7210_DAI_CFG1 0x26
#define DA7210_DAI_CFG3 0x28
@@ -50,6 +68,12 @@
#define DA7210_PLL_DIV2 0x2A
#define DA7210_PLL_DIV3 0x2B
#define DA7210_PLL 0x2C
+#define DA7210_ALC_MAX 0x83
+#define DA7210_ALC_MIN 0x84
+#define DA7210_ALC_NOIS 0x85
+#define DA7210_ALC_ATT 0x86
+#define DA7210_ALC_REL 0x87
+#define DA7210_ALC_DEL 0x88
#define DA7210_A_HID_UNLOCK 0x8A
#define DA7210_A_TEST_UNLOCK 0x8B
#define DA7210_A_PLL1 0x90
@@ -72,6 +96,7 @@
#define DA7210_IN_R_EN (1 << 7)
/* ADC bit fields */
+#define DA7210_ADC_ALC_EN (1 << 0)
#define DA7210_ADC_L_EN (1 << 3)
#define DA7210_ADC_R_EN (1 << 7)
@@ -105,12 +130,17 @@
/* DAI_CFG1 bit fields */
#define DA7210_DAI_WORD_S16_LE (0 << 0)
+#define DA7210_DAI_WORD_S20_3LE (1 << 0)
#define DA7210_DAI_WORD_S24_LE (2 << 0)
+#define DA7210_DAI_WORD_S32_LE (3 << 0)
#define DA7210_DAI_FLEN_64BIT (1 << 2)
+#define DA7210_DAI_MODE_SLAVE (0 << 7)
#define DA7210_DAI_MODE_MASTER (1 << 7)
/* DAI_CFG3 bit fields */
#define DA7210_DAI_FORMAT_I2SMODE (0 << 0)
+#define DA7210_DAI_FORMAT_LEFT_J (1 << 0)
+#define DA7210_DAI_FORMAT_RIGHT_J (2 << 0)
#define DA7210_DAI_OE (1 << 3)
#define DA7210_DAI_EN (1 << 7)
@@ -133,6 +163,43 @@
#define DA7210_PLL_FS_96000 (0xF << 0)
#define DA7210_PLL_EN (0x1 << 7)
+/* SOFTMUTE bit fields */
+#define DA7210_RAMP_EN (1 << 6)
+
+/* CONTROL bit fields */
+#define DA7210_NOISE_SUP_EN (1 << 3)
+
+/* IN_GAIN bit fields */
+#define DA7210_INPGA_L_VOL (0x0F << 0)
+#define DA7210_INPGA_R_VOL (0xF0 << 0)
+
+/* ZERO_CROSS bit fields */
+#define DA7210_AUX1_L_ZC (1 << 0)
+#define DA7210_AUX1_R_ZC (1 << 1)
+#define DA7210_HP_L_ZC (1 << 6)
+#define DA7210_HP_R_ZC (1 << 7)
+
+/* AUX1_L bit fields */
+#define DA7210_AUX1_L_VOL (0x3F << 0)
+
+/* AUX1_R bit fields */
+#define DA7210_AUX1_R_VOL (0x3F << 0)
+
+/* Minimum INPGA and AUX1 volume to enable noise suppression */
+#define DA7210_INPGA_MIN_VOL_NS 0x0A /* 10.5dB */
+#define DA7210_AUX1_MIN_VOL_NS 0x35 /* 6dB */
+
+/* OUT1_L bit fields */
+#define DA7210_OUT1_L_EN (1 << 7)
+
+/* OUT1_R bit fields */
+#define DA7210_OUT1_R_EN (1 << 7)
+
+/* OUT2 bit fields */
+#define DA7210_OUT2_OUTMIX_R (1 << 5)
+#define DA7210_OUT2_OUTMIX_L (1 << 6)
+#define DA7210_OUT2_EN (1 << 7)
+
#define DA7210_VERSION "0.0.1"
/*
@@ -144,24 +211,351 @@
* mute : 0x10
* reserved : 0x00 - 0x0F
*
- * ** FIXME **
- *
* Reserved area are considered as "mute".
- * -> min = -79.5 dB
*/
-static const DECLARE_TLV_DB_SCALE(hp_out_tlv, -7950, 150, 1);
+static const unsigned int hp_out_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x10, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 1),
+ /* -54 dB to +15 dB */
+ 0x11, 0x3f, TLV_DB_SCALE_ITEM(-5400, 150, 0),
+};
+
+static const unsigned int lineout_vol_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x10, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 1),
+ /* -54dB to 15dB */
+ 0x11, 0x3f, TLV_DB_SCALE_ITEM(-5400, 150, 0)
+};
+
+static const unsigned int mono_vol_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x2, TLV_DB_SCALE_ITEM(-1800, 0, 1),
+ /* -18dB to 6dB */
+ 0x3, 0x7, TLV_DB_SCALE_ITEM(-1800, 600, 0)
+};
+
+static const DECLARE_TLV_DB_SCALE(eq_gain_tlv, -1050, 150, 0);
+static const DECLARE_TLV_DB_SCALE(adc_eq_master_gain_tlv, -1800, 600, 1);
+static const DECLARE_TLV_DB_SCALE(dac_gain_tlv, -7725, 75, 0);
+
+/* ADC and DAC high pass filter f0 value */
+static const char const *da7210_hpf_cutoff_txt[] = {
+ "Fs/8192*pi", "Fs/4096*pi", "Fs/2048*pi", "Fs/1024*pi"
+};
+
+static const struct soc_enum da7210_dac_hpf_cutoff =
+ SOC_ENUM_SINGLE(DA7210_DAC_HPF, 0, 4, da7210_hpf_cutoff_txt);
+
+static const struct soc_enum da7210_adc_hpf_cutoff =
+ SOC_ENUM_SINGLE(DA7210_ADC_HPF, 0, 4, da7210_hpf_cutoff_txt);
+
+/* ADC and DAC voice (8kHz) high pass cutoff value */
+static const char const *da7210_vf_cutoff_txt[] = {
+ "2.5Hz", "25Hz", "50Hz", "100Hz", "150Hz", "200Hz", "300Hz", "400Hz"
+};
+
+static const struct soc_enum da7210_dac_vf_cutoff =
+ SOC_ENUM_SINGLE(DA7210_DAC_HPF, 4, 8, da7210_vf_cutoff_txt);
+
+static const struct soc_enum da7210_adc_vf_cutoff =
+ SOC_ENUM_SINGLE(DA7210_ADC_HPF, 4, 8, da7210_vf_cutoff_txt);
+
+static const char *da7210_hp_mode_txt[] = {
+ "Class H", "Class G"
+};
+
+static const struct soc_enum da7210_hp_mode_sel =
+ SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
+
+/* ALC can be enabled only if noise suppression is disabled */
+static int da7210_put_alc_sw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+
+ if (ucontrol->value.integer.value[0]) {
+ /* Check if noise suppression is enabled */
+ if (snd_soc_read(codec, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
+ dev_dbg(codec->dev,
+ "Disable noise suppression to enable ALC\n");
+ return -EINVAL;
+ }
+ }
+ /* If all conditions are met or we are actually disabling ALC */
+ return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
+/* Noise suppression can be enabled only if following conditions are met
+ * ALC disabled
+ * ZC enabled for HP and AUX1 PGA
+ * INPGA_L_VOL and INPGA_R_VOL >= 10.5 dB
+ * AUX1_L_VOL and AUX1_R_VOL >= 6 dB
+ */
+static int da7210_put_noise_sup_sw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+
+ if (ucontrol->value.integer.value[0]) {
+ /* Check if ALC is enabled */
+ if (snd_soc_read(codec, DA7210_ADC) & DA7210_ADC_ALC_EN)
+ goto err;
+
+ /* Check ZC for HP and AUX1 PGA */
+ if ((snd_soc_read(codec, DA7210_ZERO_CROSS) &
+ (DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC |
+ DA7210_HP_R_ZC)) != (DA7210_AUX1_L_ZC |
+ DA7210_AUX1_R_ZC | DA7210_HP_L_ZC | DA7210_HP_R_ZC))
+ goto err;
+
+ /* Check INPGA_L_VOL and INPGA_R_VOL */
+ val = snd_soc_read(codec, DA7210_IN_GAIN);
+ if (((val & DA7210_INPGA_L_VOL) < DA7210_INPGA_MIN_VOL_NS) ||
+ (((val & DA7210_INPGA_R_VOL) >> 4) <
+ DA7210_INPGA_MIN_VOL_NS))
+ goto err;
+
+ /* Check AUX1_L_VOL and AUX1_R_VOL */
+ if (((snd_soc_read(codec, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) <
+ DA7210_AUX1_MIN_VOL_NS) ||
+ ((snd_soc_read(codec, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) <
+ DA7210_AUX1_MIN_VOL_NS))
+ goto err;
+ }
+ /* If all conditions are met or we are actually disabling Noise sup */
+ return snd_soc_put_volsw(kcontrol, ucontrol);
+
+err:
+ return -EINVAL;
+}
static const struct snd_kcontrol_new da7210_snd_controls[] = {
SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
DA7210_HP_L_VOL, DA7210_HP_R_VOL,
0, 0x3F, 0, hp_out_tlv),
+ SOC_DOUBLE_R_TLV("Digital Playback Volume",
+ DA7210_DAC_L, DA7210_DAC_R,
+ 0, 0x77, 1, dac_gain_tlv),
+ SOC_DOUBLE_R_TLV("Lineout Playback Volume",
+ DA7210_OUT1_L, DA7210_OUT1_R,
+ 0, 0x3f, 0, lineout_vol_tlv),
+ SOC_SINGLE_TLV("Mono Playback Volume", DA7210_OUT2, 0, 0x7, 0,
+ mono_vol_tlv),
+
+ /* DAC Equalizer controls */
+ SOC_SINGLE("DAC EQ Switch", DA7210_DAC_EQ5, 7, 1, 0),
+ SOC_SINGLE_TLV("DAC EQ1 Volume", DA7210_DAC_EQ1_2, 0, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ2 Volume", DA7210_DAC_EQ1_2, 4, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ3 Volume", DA7210_DAC_EQ3_4, 0, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ4 Volume", DA7210_DAC_EQ3_4, 4, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("DAC EQ5 Volume", DA7210_DAC_EQ5, 0, 0xf, 1,
+ eq_gain_tlv),
+
+ /* ADC Equalizer controls */
+ SOC_SINGLE("ADC EQ Switch", DA7210_ADC_EQ5, 7, 1, 0),
+ SOC_SINGLE_TLV("ADC EQ Master Volume", DA7210_ADC_EQ5, 4, 0x3,
+ 1, adc_eq_master_gain_tlv),
+ SOC_SINGLE_TLV("ADC EQ1 Volume", DA7210_ADC_EQ1_2, 0, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("ADC EQ2 Volume", DA7210_ADC_EQ1_2, 4, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("ADC EQ3 Volume", DA7210_ADC_EQ3_4, 0, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("ADC EQ4 Volume", DA7210_ADC_EQ3_4, 4, 0xf, 1,
+ eq_gain_tlv),
+ SOC_SINGLE_TLV("ADC EQ5 Volume", DA7210_ADC_EQ5, 0, 0xf, 1,
+ eq_gain_tlv),
+
+ SOC_SINGLE("DAC HPF Switch", DA7210_DAC_HPF, 3, 1, 0),
+ SOC_ENUM("DAC HPF Cutoff", da7210_dac_hpf_cutoff),
+ SOC_SINGLE("DAC Voice Mode Switch", DA7210_DAC_HPF, 7, 1, 0),
+ SOC_ENUM("DAC Voice Cutoff", da7210_dac_vf_cutoff),
+
+ SOC_SINGLE("ADC HPF Switch", DA7210_ADC_HPF, 3, 1, 0),
+ SOC_ENUM("ADC HPF Cutoff", da7210_adc_hpf_cutoff),
+ SOC_SINGLE("ADC Voice Mode Switch", DA7210_ADC_HPF, 7, 1, 0),
+ SOC_ENUM("ADC Voice Cutoff", da7210_adc_vf_cutoff),
+
+ /* Mute controls */
+ SOC_DOUBLE_R("Mic Capture Switch", DA7210_MIC_L, DA7210_MIC_R, 3, 1, 0),
+ SOC_SINGLE("Aux2 Capture Switch", DA7210_AUX2, 2, 1, 0),
+ SOC_DOUBLE("ADC Capture Switch", DA7210_ADC, 2, 6, 1, 0),
+ SOC_SINGLE("Digital Soft Mute Switch", DA7210_SOFTMUTE, 7, 1, 0),
+ SOC_SINGLE("Digital Soft Mute Rate", DA7210_SOFTMUTE, 0, 0x7, 0),
+
+ /* Zero cross controls */
+ SOC_DOUBLE("Aux1 ZC Switch", DA7210_ZERO_CROSS, 0, 1, 1, 0),
+ SOC_DOUBLE("In PGA ZC Switch", DA7210_ZERO_CROSS, 2, 3, 1, 0),
+ SOC_DOUBLE("Lineout ZC Switch", DA7210_ZERO_CROSS, 4, 5, 1, 0),
+ SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
+
+ SOC_ENUM("Headphone Class", da7210_hp_mode_sel),
+
+ /* ALC controls */
+ SOC_SINGLE_EXT("ALC Enable Switch", DA7210_ADC, 0, 1, 0,
+ snd_soc_get_volsw, da7210_put_alc_sw),
+ SOC_SINGLE("ALC Capture Max Volume", DA7210_ALC_MAX, 0, 0x3F, 0),
+ SOC_SINGLE("ALC Capture Min Volume", DA7210_ALC_MIN, 0, 0x3F, 0),
+ SOC_SINGLE("ALC Capture Noise Volume", DA7210_ALC_NOIS, 0, 0x3F, 0),
+ SOC_SINGLE("ALC Capture Attack Rate", DA7210_ALC_ATT, 0, 0xFF, 0),
+ SOC_SINGLE("ALC Capture Release Rate", DA7210_ALC_REL, 0, 0xFF, 0),
+ SOC_SINGLE("ALC Capture Release Delay", DA7210_ALC_DEL, 0, 0xFF, 0),
+
+ SOC_SINGLE_EXT("Noise Suppression Enable Switch", DA7210_CONTROL, 3, 1,
+ 0, snd_soc_get_volsw, da7210_put_noise_sup_sw),
+};
+
+/*
+ * DAPM Controls
+ *
+ * Current DAPM implementation covers almost all codec components e.g. IOs,
+ * mixers, PGAs,ADC and DAC.
+ */
+/* In Mixer Left */
+static const struct snd_kcontrol_new da7210_dapm_inmixl_controls[] = {
+ SOC_DAPM_SINGLE("Mic Left Switch", DA7210_INMIX_L, 0, 1, 0),
+ SOC_DAPM_SINGLE("Mic Right Switch", DA7210_INMIX_L, 1, 1, 0),
+};
+
+/* In Mixer Right */
+static const struct snd_kcontrol_new da7210_dapm_inmixr_controls[] = {
+ SOC_DAPM_SINGLE("Mic Right Switch", DA7210_INMIX_R, 0, 1, 0),
+ SOC_DAPM_SINGLE("Mic Left Switch", DA7210_INMIX_R, 1, 1, 0),
+};
+
+/* Out Mixer Left */
+static const struct snd_kcontrol_new da7210_dapm_outmixl_controls[] = {
+ SOC_DAPM_SINGLE("DAC Left Switch", DA7210_OUTMIX_L, 4, 1, 0),
+};
+
+/* Out Mixer Right */
+static const struct snd_kcontrol_new da7210_dapm_outmixr_controls[] = {
+ SOC_DAPM_SINGLE("DAC Right Switch", DA7210_OUTMIX_R, 4, 1, 0),
+};
+
+/* Mono Mixer */
+static const struct snd_kcontrol_new da7210_dapm_monomix_controls[] = {
+ SOC_DAPM_SINGLE("Outmix Right Switch", DA7210_OUT2, 5, 1, 0),
+ SOC_DAPM_SINGLE("Outmix Left Switch", DA7210_OUT2, 6, 1, 0),
+};
+
+/* DAPM widgets */
+static const struct snd_soc_dapm_widget da7210_dapm_widgets[] = {
+ /* Input Side */
+ /* Input Lines */
+ SND_SOC_DAPM_INPUT("MICL"),
+ SND_SOC_DAPM_INPUT("MICR"),
+
+ /* Input PGAs */
+ SND_SOC_DAPM_PGA("Mic Left", DA7210_STARTUP3, 0, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("Mic Right", DA7210_STARTUP3, 1, 1, NULL, 0),
+
+ SND_SOC_DAPM_PGA("INPGA Left", DA7210_INMIX_L, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("INPGA Right", DA7210_INMIX_R, 7, 0, NULL, 0),
+
+ /* Input Mixers */
+ SND_SOC_DAPM_MIXER("In Mixer Left", SND_SOC_NOPM, 0, 0,
+ &da7210_dapm_inmixl_controls[0],
+ ARRAY_SIZE(da7210_dapm_inmixl_controls)),
+
+ SND_SOC_DAPM_MIXER("In Mixer Right", SND_SOC_NOPM, 0, 0,
+ &da7210_dapm_inmixr_controls[0],
+ ARRAY_SIZE(da7210_dapm_inmixr_controls)),
+
+ /* ADCs */
+ SND_SOC_DAPM_ADC("ADC Left", "Capture", DA7210_STARTUP3, 5, 1),
+ SND_SOC_DAPM_ADC("ADC Right", "Capture", DA7210_STARTUP3, 6, 1),
+
+ /* Output Side */
+ /* DACs */
+ SND_SOC_DAPM_DAC("DAC Left", "Playback", DA7210_STARTUP2, 5, 1),
+ SND_SOC_DAPM_DAC("DAC Right", "Playback", DA7210_STARTUP2, 6, 1),
+
+ /* Output Mixers */
+ SND_SOC_DAPM_MIXER("Out Mixer Left", SND_SOC_NOPM, 0, 0,
+ &da7210_dapm_outmixl_controls[0],
+ ARRAY_SIZE(da7210_dapm_outmixl_controls)),
+
+ SND_SOC_DAPM_MIXER("Out Mixer Right", SND_SOC_NOPM, 0, 0,
+ &da7210_dapm_outmixr_controls[0],
+ ARRAY_SIZE(da7210_dapm_outmixr_controls)),
+
+ SND_SOC_DAPM_MIXER("Mono Mixer", SND_SOC_NOPM, 0, 0,
+ &da7210_dapm_monomix_controls[0],
+ ARRAY_SIZE(da7210_dapm_monomix_controls)),
+
+ /* Output PGAs */
+ SND_SOC_DAPM_PGA("OUTPGA Left Enable", DA7210_OUTMIX_L, 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("OUTPGA Right Enable", DA7210_OUTMIX_R, 7, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA("Out1 Left", DA7210_STARTUP2, 0, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("Out1 Right", DA7210_STARTUP2, 1, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("Out2 Mono", DA7210_STARTUP2, 2, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("Headphone Left", DA7210_STARTUP2, 3, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("Headphone Right", DA7210_STARTUP2, 4, 1, NULL, 0),
+
+ /* Output Lines */
+ SND_SOC_DAPM_OUTPUT("OUT1L"),
+ SND_SOC_DAPM_OUTPUT("OUT1R"),
+ SND_SOC_DAPM_OUTPUT("HPL"),
+ SND_SOC_DAPM_OUTPUT("HPR"),
+ SND_SOC_DAPM_OUTPUT("OUT2"),
+};
+
+/* DAPM audio route definition */
+static const struct snd_soc_dapm_route da7210_audio_map[] = {
+ /* Dest Connecting Widget source */
+ /* Input path */
+ {"Mic Left", NULL, "MICL"},
+ {"Mic Right", NULL, "MICR"},
+
+ {"In Mixer Left", "Mic Left Switch", "Mic Left"},
+ {"In Mixer Left", "Mic Right Switch", "Mic Right"},
+
+ {"In Mixer Right", "Mic Right Switch", "Mic Right"},
+ {"In Mixer Right", "Mic Left Switch", "Mic Left"},
+
+ {"INPGA Left", NULL, "In Mixer Left"},
+ {"ADC Left", NULL, "INPGA Left"},
+
+ {"INPGA Right", NULL, "In Mixer Right"},
+ {"ADC Right", NULL, "INPGA Right"},
+
+ /* Output path */
+ {"Out Mixer Left", "DAC Left Switch", "DAC Left"},
+ {"Out Mixer Right", "DAC Right Switch", "DAC Right"},
+
+ {"Mono Mixer", "Outmix Right Switch", "Out Mixer Right"},
+ {"Mono Mixer", "Outmix Left Switch", "Out Mixer Left"},
+
+ {"OUTPGA Left Enable", NULL, "Out Mixer Left"},
+ {"OUTPGA Right Enable", NULL, "Out Mixer Right"},
+
+ {"Out1 Left", NULL, "OUTPGA Left Enable"},
+ {"OUT1L", NULL, "Out1 Left"},
+
+ {"Out1 Right", NULL, "OUTPGA Right Enable"},
+ {"OUT1R", NULL, "Out1 Right"},
+
+ {"Headphone Left", NULL, "OUTPGA Left Enable"},
+ {"HPL", NULL, "Headphone Left"},
+
+ {"Headphone Right", NULL, "OUTPGA Right Enable"},
+ {"HPR", NULL, "Headphone Right"},
+
+ {"Out2 Mono", NULL, "Mono Mixer"},
+ {"OUT2", NULL, "Out2 Mono"},
};
/* Codec private data */
struct da7210_priv {
enum snd_soc_control_type control_type;
- void *control_data;
};
/*
@@ -188,72 +582,15 @@
0x00, /* R88 */
};
-/*
- * Read da7210 register cache
- */
-static inline u32 da7210_read_reg_cache(struct snd_soc_codec *codec, u32 reg)
+static int da7210_volatile_register(struct snd_soc_codec *codec,
+ unsigned int reg)
{
- u8 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(da7210_reg));
- return cache[reg];
-}
-
-/*
- * Write to the da7210 register space
- */
-static int da7210_write(struct snd_soc_codec *codec, u32 reg, u32 value)
-{
- u8 *cache = codec->reg_cache;
- u8 data[2];
-
- BUG_ON(codec->driver->volatile_register);
-
- data[0] = reg & 0xff;
- data[1] = value & 0xff;
-
- if (reg >= codec->driver->reg_cache_size)
- return -EIO;
-
- if (2 != codec->hw_write(codec->control_data, data, 2))
- return -EIO;
-
- cache[reg] = value;
- return 0;
-}
-
-/*
- * Read from the da7210 register space.
- */
-static inline u32 da7210_read(struct snd_soc_codec *codec, u32 reg)
-{
- if (DA7210_STATUS == reg)
- return i2c_smbus_read_byte_data(codec->control_data, reg);
-
- return da7210_read_reg_cache(codec, reg);
-}
-
-static int da7210_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- struct snd_soc_codec *codec = dai->codec;
-
- if (is_play) {
- /* Enable Out */
- snd_soc_update_bits(codec, DA7210_OUTMIX_L, 0x1F, 0x10);
- snd_soc_update_bits(codec, DA7210_OUTMIX_R, 0x1F, 0x10);
-
- } else {
- /* Volume 7 */
- snd_soc_update_bits(codec, DA7210_MIC_L, 0x7, 0x7);
- snd_soc_update_bits(codec, DA7210_MIC_R, 0x7, 0x7);
-
- /* Enable Mic */
- snd_soc_update_bits(codec, DA7210_INMIX_L, 0x1F, 0x1);
- snd_soc_update_bits(codec, DA7210_INMIX_R, 0x1F, 0x1);
+ switch (reg) {
+ case DA7210_STATUS:
+ return 1;
+ default:
+ return 0;
}
-
- return 0;
}
/*
@@ -266,93 +603,75 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
u32 dai_cfg1;
- u32 hpf_reg, hpf_mask, hpf_value;
u32 fs, bypass;
/* set DAI source to Left and Right ADC */
- da7210_write(codec, DA7210_DAI_SRC_SEL,
+ snd_soc_write(codec, DA7210_DAI_SRC_SEL,
DA7210_DAI_OUT_R_SRC | DA7210_DAI_OUT_L_SRC);
/* Enable DAI */
- da7210_write(codec, DA7210_DAI_CFG3, DA7210_DAI_OE | DA7210_DAI_EN);
+ snd_soc_write(codec, DA7210_DAI_CFG3, DA7210_DAI_OE | DA7210_DAI_EN);
- dai_cfg1 = 0xFC & da7210_read(codec, DA7210_DAI_CFG1);
+ dai_cfg1 = 0xFC & snd_soc_read(codec, DA7210_DAI_CFG1);
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
dai_cfg1 |= DA7210_DAI_WORD_S16_LE;
break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ dai_cfg1 |= DA7210_DAI_WORD_S20_3LE;
+ break;
case SNDRV_PCM_FORMAT_S24_LE:
dai_cfg1 |= DA7210_DAI_WORD_S24_LE;
break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ dai_cfg1 |= DA7210_DAI_WORD_S32_LE;
+ break;
default:
return -EINVAL;
}
- da7210_write(codec, DA7210_DAI_CFG1, dai_cfg1);
-
- hpf_reg = (SNDRV_PCM_STREAM_PLAYBACK == substream->stream) ?
- DA7210_DAC_HPF : DA7210_ADC_HPF;
+ snd_soc_write(codec, DA7210_DAI_CFG1, dai_cfg1);
switch (params_rate(params)) {
case 8000:
fs = DA7210_PLL_FS_8000;
- hpf_mask = DA7210_VOICE_F0_MASK | DA7210_VOICE_EN;
- hpf_value = DA7210_VOICE_F0_25 | DA7210_VOICE_EN;
bypass = DA7210_PLL_BYP;
break;
case 11025:
fs = DA7210_PLL_FS_11025;
- hpf_mask = DA7210_VOICE_F0_MASK | DA7210_VOICE_EN;
- hpf_value = DA7210_VOICE_F0_25 | DA7210_VOICE_EN;
bypass = 0;
break;
case 12000:
fs = DA7210_PLL_FS_12000;
- hpf_mask = DA7210_VOICE_F0_MASK | DA7210_VOICE_EN;
- hpf_value = DA7210_VOICE_F0_25 | DA7210_VOICE_EN;
bypass = DA7210_PLL_BYP;
break;
case 16000:
fs = DA7210_PLL_FS_16000;
- hpf_mask = DA7210_VOICE_F0_MASK | DA7210_VOICE_EN;
- hpf_value = DA7210_VOICE_F0_25 | DA7210_VOICE_EN;
bypass = DA7210_PLL_BYP;
break;
case 22050:
fs = DA7210_PLL_FS_22050;
- hpf_mask = DA7210_VOICE_EN;
- hpf_value = 0;
bypass = 0;
break;
case 32000:
fs = DA7210_PLL_FS_32000;
- hpf_mask = DA7210_VOICE_EN;
- hpf_value = 0;
bypass = DA7210_PLL_BYP;
break;
case 44100:
fs = DA7210_PLL_FS_44100;
- hpf_mask = DA7210_VOICE_EN;
- hpf_value = 0;
bypass = 0;
break;
case 48000:
fs = DA7210_PLL_FS_48000;
- hpf_mask = DA7210_VOICE_EN;
- hpf_value = 0;
bypass = DA7210_PLL_BYP;
break;
case 88200:
fs = DA7210_PLL_FS_88200;
- hpf_mask = DA7210_VOICE_EN;
- hpf_value = 0;
bypass = 0;
break;
case 96000:
fs = DA7210_PLL_FS_96000;
- hpf_mask = DA7210_VOICE_EN;
- hpf_value = 0;
bypass = DA7210_PLL_BYP;
break;
default:
@@ -362,7 +681,6 @@
/* Disable active mode */
snd_soc_update_bits(codec, DA7210_STARTUP1, DA7210_SC_MST_EN, 0);
- snd_soc_update_bits(codec, hpf_reg, hpf_mask, hpf_value);
snd_soc_update_bits(codec, DA7210_PLL, DA7210_PLL_FS_MASK, fs);
snd_soc_update_bits(codec, DA7210_PLL_DIV3, DA7210_PLL_BYP, bypass);
@@ -382,13 +700,16 @@
u32 dai_cfg1;
u32 dai_cfg3;
- dai_cfg1 = 0x7f & da7210_read(codec, DA7210_DAI_CFG1);
- dai_cfg3 = 0xfc & da7210_read(codec, DA7210_DAI_CFG3);
+ dai_cfg1 = 0x7f & snd_soc_read(codec, DA7210_DAI_CFG1);
+ dai_cfg3 = 0xfc & snd_soc_read(codec, DA7210_DAI_CFG3);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
dai_cfg1 |= DA7210_DAI_MODE_MASTER;
break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ dai_cfg1 |= DA7210_DAI_MODE_SLAVE;
+ break;
default:
return -EINVAL;
}
@@ -401,6 +722,12 @@
case SND_SOC_DAIFMT_I2S:
dai_cfg3 |= DA7210_DAI_FORMAT_I2SMODE;
break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ dai_cfg3 |= DA7210_DAI_FORMAT_LEFT_J;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ dai_cfg3 |= DA7210_DAI_FORMAT_RIGHT_J;
+ break;
default:
return -EINVAL;
}
@@ -411,19 +738,32 @@
*/
dai_cfg1 |= DA7210_DAI_FLEN_64BIT;
- da7210_write(codec, DA7210_DAI_CFG1, dai_cfg1);
- da7210_write(codec, DA7210_DAI_CFG3, dai_cfg3);
+ snd_soc_write(codec, DA7210_DAI_CFG1, dai_cfg1);
+ snd_soc_write(codec, DA7210_DAI_CFG3, dai_cfg3);
return 0;
}
-#define DA7210_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE)
+static int da7210_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u8 mute_reg = snd_soc_read(codec, DA7210_DAC_HPF) & 0xFB;
+
+ if (mute)
+ snd_soc_write(codec, DA7210_DAC_HPF, mute_reg | 0x4);
+ else
+ snd_soc_write(codec, DA7210_DAC_HPF, mute_reg);
+ return 0;
+}
+
+#define DA7210_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
/* DAI operations */
static struct snd_soc_dai_ops da7210_dai_ops = {
- .startup = da7210_startup,
.hw_params = da7210_hw_params,
.set_fmt = da7210_set_dai_fmt,
+ .digital_mute = da7210_mute,
};
static struct snd_soc_dai_driver da7210_dai = {
@@ -451,11 +791,15 @@
static int da7210_probe(struct snd_soc_codec *codec)
{
struct da7210_priv *da7210 = snd_soc_codec_get_drvdata(codec);
+ int ret;
dev_info(codec->dev, "DA7210 Audio Codec %s\n", DA7210_VERSION);
- codec->control_data = da7210->control_data;
- codec->hw_write = (hw_write_t)i2c_master_send;
+ ret = snd_soc_codec_set_cache_io(codec, 8, 8, da7210->control_type);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
/* FIXME
*
@@ -472,8 +816,8 @@
/*
* make sure that DA7210 use bypass mode before start up
*/
- da7210_write(codec, DA7210_STARTUP1, 0);
- da7210_write(codec, DA7210_PLL_DIV3,
+ snd_soc_write(codec, DA7210_STARTUP1, 0);
+ snd_soc_write(codec, DA7210_PLL_DIV3,
DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP);
/*
@@ -481,36 +825,70 @@
*/
/* Enable Left & Right MIC PGA and Mic Bias */
- da7210_write(codec, DA7210_MIC_L, DA7210_MIC_L_EN | DA7210_MICBIAS_EN);
- da7210_write(codec, DA7210_MIC_R, DA7210_MIC_R_EN);
+ snd_soc_write(codec, DA7210_MIC_L, DA7210_MIC_L_EN | DA7210_MICBIAS_EN);
+ snd_soc_write(codec, DA7210_MIC_R, DA7210_MIC_R_EN);
/* Enable Left and Right input PGA */
- da7210_write(codec, DA7210_INMIX_L, DA7210_IN_L_EN);
- da7210_write(codec, DA7210_INMIX_R, DA7210_IN_R_EN);
+ snd_soc_write(codec, DA7210_INMIX_L, DA7210_IN_L_EN);
+ snd_soc_write(codec, DA7210_INMIX_R, DA7210_IN_R_EN);
/* Enable Left and Right ADC */
- da7210_write(codec, DA7210_ADC, DA7210_ADC_L_EN | DA7210_ADC_R_EN);
+ snd_soc_write(codec, DA7210_ADC, DA7210_ADC_L_EN | DA7210_ADC_R_EN);
/*
* DAC settings
*/
/* Enable Left and Right DAC */
- da7210_write(codec, DA7210_DAC_SEL,
+ snd_soc_write(codec, DA7210_DAC_SEL,
DA7210_DAC_L_SRC_DAI_L | DA7210_DAC_L_EN |
DA7210_DAC_R_SRC_DAI_R | DA7210_DAC_R_EN);
/* Enable Left and Right out PGA */
- da7210_write(codec, DA7210_OUTMIX_L, DA7210_OUT_L_EN);
- da7210_write(codec, DA7210_OUTMIX_R, DA7210_OUT_R_EN);
+ snd_soc_write(codec, DA7210_OUTMIX_L, DA7210_OUT_L_EN);
+ snd_soc_write(codec, DA7210_OUTMIX_R, DA7210_OUT_R_EN);
/* Enable Left and Right HeadPhone PGA */
- da7210_write(codec, DA7210_HP_CFG,
+ snd_soc_write(codec, DA7210_HP_CFG,
DA7210_HP_2CAP_MODE | DA7210_HP_SENSE_EN |
DA7210_HP_L_EN | DA7210_HP_MODE | DA7210_HP_R_EN);
+ /* Enable ramp mode for DAC gain update */
+ snd_soc_write(codec, DA7210_SOFTMUTE, DA7210_RAMP_EN);
+
+ /*
+ * For DA7210 codec, there are two ways to enable/disable analog IOs
+ * and ADC/DAC,
+ * (1) Using "Enable Bit" of register associated with that IO
+ * (or ADC/DAC)
+ * e.g. Mic Left can be enabled using bit 7 of MIC_L(0x7) reg
+ *
+ * (2) Using "Standby Bit" of STARTUP2 or STARTUP3 register
+ * e.g. Mic left can be put to STANDBY using bit 0 of STARTUP3(0x5)
+ *
+ * Out of these two methods, the one using STANDBY bits is preferred
+ * way to enable/disable individual blocks. This is because STANDBY
+ * registers are part of system controller which allows system power
+ * up/down in a controlled, pop-free manner. Also, as per application
+ * note of DA7210, STANDBY register bits are only effective if a
+ * particular IO (or ADC/DAC) is already enabled using enable/disable
+ * register bits. Keeping these things in mind, current DAPM
+ * implementation manipulates only STANDBY bits.
+ *
+ * Overall implementation can be outlined as below,
+ *
+ * - "Enable bit" of an IO or ADC/DAC is used to enable it in probe()
+ * - "STANDBY bit" is controlled by DAPM
+ */
+
+ /* Enable Line out amplifiers */
+ snd_soc_write(codec, DA7210_OUT1_L, DA7210_OUT1_L_EN);
+ snd_soc_write(codec, DA7210_OUT1_R, DA7210_OUT1_R_EN);
+ snd_soc_write(codec, DA7210_OUT2, DA7210_OUT2_EN |
+ DA7210_OUT2_OUTMIX_L | DA7210_OUT2_OUTMIX_R);
+
/* Diable PLL and bypass it */
- da7210_write(codec, DA7210_PLL, DA7210_PLL_FS_48000);
+ snd_soc_write(codec, DA7210_PLL, DA7210_PLL_FS_48000);
/*
* If 48kHz sound came, it use bypass mode,
@@ -521,25 +899,22 @@
* DA7210_PLL_DIV3 :: DA7210_PLL_BYP bit.
* see da7210_hw_params
*/
- da7210_write(codec, DA7210_PLL_DIV1, 0xE5); /* MCLK = 12.288MHz */
- da7210_write(codec, DA7210_PLL_DIV2, 0x99);
- da7210_write(codec, DA7210_PLL_DIV3, 0x0A |
+ snd_soc_write(codec, DA7210_PLL_DIV1, 0xE5); /* MCLK = 12.288MHz */
+ snd_soc_write(codec, DA7210_PLL_DIV2, 0x99);
+ snd_soc_write(codec, DA7210_PLL_DIV3, 0x0A |
DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP);
snd_soc_update_bits(codec, DA7210_PLL, DA7210_PLL_EN, DA7210_PLL_EN);
/* As suggested by Dialog */
- da7210_write(codec, DA7210_A_HID_UNLOCK, 0x8B); /* unlock */
- da7210_write(codec, DA7210_A_TEST_UNLOCK, 0xB4);
- da7210_write(codec, DA7210_A_PLL1, 0x01);
- da7210_write(codec, DA7210_A_CP_MODE, 0x7C);
- da7210_write(codec, DA7210_A_HID_UNLOCK, 0x00); /* re-lock */
- da7210_write(codec, DA7210_A_TEST_UNLOCK, 0x00);
+ snd_soc_write(codec, DA7210_A_HID_UNLOCK, 0x8B); /* unlock */
+ snd_soc_write(codec, DA7210_A_TEST_UNLOCK, 0xB4);
+ snd_soc_write(codec, DA7210_A_PLL1, 0x01);
+ snd_soc_write(codec, DA7210_A_CP_MODE, 0x7C);
+ snd_soc_write(codec, DA7210_A_HID_UNLOCK, 0x00); /* re-lock */
+ snd_soc_write(codec, DA7210_A_TEST_UNLOCK, 0x00);
/* Activate all enabled subsystem */
- da7210_write(codec, DA7210_STARTUP1, DA7210_SC_MST_EN);
-
- snd_soc_add_controls(codec, da7210_snd_controls,
- ARRAY_SIZE(da7210_snd_controls));
+ snd_soc_write(codec, DA7210_STARTUP1, DA7210_SC_MST_EN);
dev_info(codec->dev, "DA7210 Audio Codec %s\n", DA7210_VERSION);
@@ -548,11 +923,18 @@
static struct snd_soc_codec_driver soc_codec_dev_da7210 = {
.probe = da7210_probe,
- .read = da7210_read,
- .write = da7210_write,
.reg_cache_size = ARRAY_SIZE(da7210_reg),
.reg_word_size = sizeof(u8),
.reg_cache_default = da7210_reg,
+ .volatile_register = da7210_volatile_register,
+
+ .controls = da7210_snd_controls,
+ .num_controls = ARRAY_SIZE(da7210_snd_controls),
+
+ .dapm_widgets = da7210_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(da7210_dapm_widgets),
+ .dapm_routes = da7210_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(da7210_audio_map),
};
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
@@ -567,7 +949,6 @@
return -ENOMEM;
i2c_set_clientdata(i2c, da7210);
- da7210->control_data = i2c;
da7210->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c
index 2c2a681..c387daf 100644
--- a/sound/soc/codecs/lm4857.c
+++ b/sound/soc/codecs/lm4857.c
@@ -3,7 +3,7 @@
*
* Copyright 2007 Wolfson Microelectronics PLC.
* Author: Graeme Gregory
- * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ * graeme.gregory@wolfsonmicro.com
* Copyright 2011 Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index ac65a2d..ebbf63c 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -40,7 +40,6 @@
struct max98088_priv {
enum max98088_type devtype;
- void *control_data;
struct max98088_pdata *pdata;
unsigned int sysclk;
struct max98088_cdata dai[2];
@@ -1697,13 +1696,19 @@
}
};
-static int max98088_get_channel(const char *name)
+static const char *eq_mode_name[] = {"EQ1 Mode", "EQ2 Mode"};
+
+static int max98088_get_channel(struct snd_soc_codec *codec, const char *name)
{
- if (strcmp(name, "EQ1 Mode") == 0)
- return 0;
- if (strcmp(name, "EQ2 Mode") == 0)
- return 1;
- return -EINVAL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(eq_mode_name); i++)
+ if (strcmp(name, eq_mode_name[i]) == 0)
+ return i;
+
+ /* Shouldn't happen */
+ dev_err(codec->dev, "Bad EQ channel name '%s'\n", name);
+ return -EINVAL;
}
static void max98088_setup_eq1(struct snd_soc_codec *codec)
@@ -1807,10 +1812,13 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
struct max98088_pdata *pdata = max98088->pdata;
- int channel = max98088_get_channel(kcontrol->id.name);
+ int channel = max98088_get_channel(codec, kcontrol->id.name);
struct max98088_cdata *cdata;
int sel = ucontrol->value.integer.value[0];
+ if (channel < 0)
+ return channel;
+
cdata = &max98088->dai[channel];
if (sel >= pdata->eq_cfgcnt)
@@ -1835,9 +1843,12 @@
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
- int channel = max98088_get_channel(kcontrol->id.name);
+ int channel = max98088_get_channel(codec, kcontrol->id.name);
struct max98088_cdata *cdata;
+ if (channel < 0)
+ return channel;
+
cdata = &max98088->dai[channel];
ucontrol->value.enumerated.item[0] = cdata->eq_sel;
return 0;
@@ -1852,17 +1863,17 @@
int i, j;
const char **t;
int ret;
-
struct snd_kcontrol_new controls[] = {
- SOC_ENUM_EXT("EQ1 Mode",
+ SOC_ENUM_EXT((char *)eq_mode_name[0],
max98088->eq_enum,
max98088_get_eq_enum,
max98088_put_eq_enum),
- SOC_ENUM_EXT("EQ2 Mode",
+ SOC_ENUM_EXT((char *)eq_mode_name[1],
max98088->eq_enum,
max98088_get_eq_enum,
max98088_put_eq_enum),
};
+ BUILD_BUG_ON(ARRAY_SIZE(controls) != ARRAY_SIZE(eq_mode_name));
cfg = pdata->eq_cfg;
cfgcnt = pdata->eq_cfgcnt;
@@ -2066,7 +2077,6 @@
max98088->devtype = id->driver_data;
i2c_set_clientdata(i2c, max98088);
- max98088->control_data = i2c;
max98088->pdata = i2c->dev.platform_data;
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c
index 668434d..26d7b08 100644
--- a/sound/soc/codecs/max98095.c
+++ b/sound/soc/codecs/max98095.c
@@ -40,7 +40,6 @@
struct max98095_priv {
enum max98095_type devtype;
- void *control_data;
struct max98095_pdata *pdata;
unsigned int sysclk;
struct max98095_cdata dai[3];
@@ -618,14 +617,13 @@
static int max98095_hw_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
- u8 data[2];
+ int ret;
- data[0] = reg;
- data[1] = value;
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
+ codec->cache_bypass = 1;
+ ret = snd_soc_write(codec, reg, value);
+ codec->cache_bypass = 0;
+
+ return ret ? -EIO : 0;
}
/*
@@ -1992,12 +1990,19 @@
dev_err(codec->dev, "Failed to add EQ control: %d\n", ret);
}
-static int max98095_get_bq_channel(const char *name)
+static const char *bq_mode_name[] = {"Biquad1 Mode", "Biquad2 Mode"};
+
+static int max98095_get_bq_channel(struct snd_soc_codec *codec,
+ const char *name)
{
- if (strcmp(name, "Biquad1 Mode") == 0)
- return 0;
- if (strcmp(name, "Biquad2 Mode") == 0)
- return 1;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bq_mode_name); i++)
+ if (strcmp(name, bq_mode_name[i]) == 0)
+ return i;
+
+ /* Shouldn't happen */
+ dev_err(codec->dev, "Bad biquad channel name '%s'\n", name);
return -EINVAL;
}
@@ -2007,14 +2012,15 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct max98095_priv *max98095 = snd_soc_codec_get_drvdata(codec);
struct max98095_pdata *pdata = max98095->pdata;
- int channel = max98095_get_bq_channel(kcontrol->id.name);
+ int channel = max98095_get_bq_channel(codec, kcontrol->id.name);
struct max98095_cdata *cdata;
int sel = ucontrol->value.integer.value[0];
struct max98095_biquad_cfg *coef_set;
int fs, best, best_val, i;
int regmask, regsave;
- BUG_ON(channel > 1);
+ if (channel < 0)
+ return channel;
if (!pdata || !max98095->bq_textcnt)
return 0;
@@ -2066,9 +2072,12 @@
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct max98095_priv *max98095 = snd_soc_codec_get_drvdata(codec);
- int channel = max98095_get_bq_channel(kcontrol->id.name);
+ int channel = max98095_get_bq_channel(codec, kcontrol->id.name);
struct max98095_cdata *cdata;
+ if (channel < 0)
+ return channel;
+
cdata = &max98095->dai[channel];
ucontrol->value.enumerated.item[0] = cdata->bq_sel;
@@ -2086,15 +2095,16 @@
int ret;
struct snd_kcontrol_new controls[] = {
- SOC_ENUM_EXT("Biquad1 Mode",
+ SOC_ENUM_EXT((char *)bq_mode_name[0],
max98095->bq_enum,
max98095_get_bq_enum,
max98095_put_bq_enum),
- SOC_ENUM_EXT("Biquad2 Mode",
+ SOC_ENUM_EXT((char *)bq_mode_name[1],
max98095->bq_enum,
max98095_get_bq_enum,
max98095_put_bq_enum),
};
+ BUILD_BUG_ON(ARRAY_SIZE(controls) != ARRAY_SIZE(bq_mode_name));
cfg = pdata->bq_cfg;
cfgcnt = pdata->bq_cfgcnt;
@@ -2337,7 +2347,6 @@
max98095->devtype = id->driver_data;
i2c_set_clientdata(i2c, max98095);
- max98095->control_data = i2c;
max98095->pdata = i2c->dev.platform_data;
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_max98095,
diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c
new file mode 100644
index 0000000..27a078c
--- /dev/null
+++ b/sound/soc/codecs/rt5631.c
@@ -0,0 +1,1773 @@
+/*
+ * rt5631.c -- RT5631 ALSA Soc Audio driver
+ *
+ * Copyright 2011 Realtek Microelectronics
+ *
+ * Author: flove <flove@realtek.com>
+ *
+ * Based on WM8753.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "rt5631.h"
+
+struct rt5631_priv {
+ int codec_version;
+ int master;
+ int sysclk;
+ int rx_rate;
+ int bclk_rate;
+ int dmic_used_flag;
+};
+
+static const u16 rt5631_reg[RT5631_VENDOR_ID2 + 1] = {
+ [RT5631_SPK_OUT_VOL] = 0x8888,
+ [RT5631_HP_OUT_VOL] = 0x8080,
+ [RT5631_MONO_AXO_1_2_VOL] = 0xa080,
+ [RT5631_AUX_IN_VOL] = 0x0808,
+ [RT5631_ADC_REC_MIXER] = 0xf0f0,
+ [RT5631_VDAC_DIG_VOL] = 0x0010,
+ [RT5631_OUTMIXER_L_CTRL] = 0xffc0,
+ [RT5631_OUTMIXER_R_CTRL] = 0xffc0,
+ [RT5631_AXO1MIXER_CTRL] = 0x88c0,
+ [RT5631_AXO2MIXER_CTRL] = 0x88c0,
+ [RT5631_DIG_MIC_CTRL] = 0x3000,
+ [RT5631_MONO_INPUT_VOL] = 0x8808,
+ [RT5631_SPK_MIXER_CTRL] = 0xf8f8,
+ [RT5631_SPK_MONO_OUT_CTRL] = 0xfc00,
+ [RT5631_SPK_MONO_HP_OUT_CTRL] = 0x4440,
+ [RT5631_SDP_CTRL] = 0x8000,
+ [RT5631_MONO_SDP_CTRL] = 0x8000,
+ [RT5631_STEREO_AD_DA_CLK_CTRL] = 0x2010,
+ [RT5631_GEN_PUR_CTRL_REG] = 0x0e00,
+ [RT5631_INT_ST_IRQ_CTRL_2] = 0x071a,
+ [RT5631_MISC_CTRL] = 0x2040,
+ [RT5631_DEPOP_FUN_CTRL_2] = 0x8000,
+ [RT5631_SOFT_VOL_CTRL] = 0x07e0,
+ [RT5631_ALC_CTRL_1] = 0x0206,
+ [RT5631_ALC_CTRL_3] = 0x2000,
+ [RT5631_PSEUDO_SPATL_CTRL] = 0x0553,
+};
+
+/**
+ * rt5631_write_index - write index register of 2nd layer
+ */
+static void rt5631_write_index(struct snd_soc_codec *codec,
+ unsigned int reg, unsigned int value)
+{
+ snd_soc_write(codec, RT5631_INDEX_ADD, reg);
+ snd_soc_write(codec, RT5631_INDEX_DATA, value);
+}
+
+/**
+ * rt5631_read_index - read index register of 2nd layer
+ */
+static unsigned int rt5631_read_index(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ unsigned int value;
+
+ snd_soc_write(codec, RT5631_INDEX_ADD, reg);
+ value = snd_soc_read(codec, RT5631_INDEX_DATA);
+
+ return value;
+}
+
+static int rt5631_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, RT5631_RESET, 0);
+}
+
+static int rt5631_volatile_register(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ switch (reg) {
+ case RT5631_RESET:
+ case RT5631_INT_ST_IRQ_CTRL_2:
+ case RT5631_INDEX_ADD:
+ case RT5631_INDEX_DATA:
+ case RT5631_EQ_CTRL:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int rt5631_readable_register(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ switch (reg) {
+ case RT5631_RESET:
+ case RT5631_SPK_OUT_VOL:
+ case RT5631_HP_OUT_VOL:
+ case RT5631_MONO_AXO_1_2_VOL:
+ case RT5631_AUX_IN_VOL:
+ case RT5631_STEREO_DAC_VOL_1:
+ case RT5631_MIC_CTRL_1:
+ case RT5631_STEREO_DAC_VOL_2:
+ case RT5631_ADC_CTRL_1:
+ case RT5631_ADC_REC_MIXER:
+ case RT5631_ADC_CTRL_2:
+ case RT5631_VDAC_DIG_VOL:
+ case RT5631_OUTMIXER_L_CTRL:
+ case RT5631_OUTMIXER_R_CTRL:
+ case RT5631_AXO1MIXER_CTRL:
+ case RT5631_AXO2MIXER_CTRL:
+ case RT5631_MIC_CTRL_2:
+ case RT5631_DIG_MIC_CTRL:
+ case RT5631_MONO_INPUT_VOL:
+ case RT5631_SPK_MIXER_CTRL:
+ case RT5631_SPK_MONO_OUT_CTRL:
+ case RT5631_SPK_MONO_HP_OUT_CTRL:
+ case RT5631_SDP_CTRL:
+ case RT5631_MONO_SDP_CTRL:
+ case RT5631_STEREO_AD_DA_CLK_CTRL:
+ case RT5631_PWR_MANAG_ADD1:
+ case RT5631_PWR_MANAG_ADD2:
+ case RT5631_PWR_MANAG_ADD3:
+ case RT5631_PWR_MANAG_ADD4:
+ case RT5631_GEN_PUR_CTRL_REG:
+ case RT5631_GLOBAL_CLK_CTRL:
+ case RT5631_PLL_CTRL:
+ case RT5631_INT_ST_IRQ_CTRL_1:
+ case RT5631_INT_ST_IRQ_CTRL_2:
+ case RT5631_GPIO_CTRL:
+ case RT5631_MISC_CTRL:
+ case RT5631_DEPOP_FUN_CTRL_1:
+ case RT5631_DEPOP_FUN_CTRL_2:
+ case RT5631_JACK_DET_CTRL:
+ case RT5631_SOFT_VOL_CTRL:
+ case RT5631_ALC_CTRL_1:
+ case RT5631_ALC_CTRL_2:
+ case RT5631_ALC_CTRL_3:
+ case RT5631_PSEUDO_SPATL_CTRL:
+ case RT5631_INDEX_ADD:
+ case RT5631_INDEX_DATA:
+ case RT5631_EQ_CTRL:
+ case RT5631_VENDOR_ID:
+ case RT5631_VENDOR_ID1:
+ case RT5631_VENDOR_ID2:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
+static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -95625, 375, 0);
+static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
+/* {0, +20, +24, +30, +35, +40, +44, +50, +52}dB */
+static unsigned int mic_bst_tlv[] = {
+ TLV_DB_RANGE_HEAD(6),
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0),
+ 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
+ 3, 5, TLV_DB_SCALE_ITEM(3000, 500, 0),
+ 6, 6, TLV_DB_SCALE_ITEM(4400, 0, 0),
+ 7, 7, TLV_DB_SCALE_ITEM(5000, 0, 0),
+ 8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0),
+};
+
+static int rt5631_dmic_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.integer.value[0] = rt5631->dmic_used_flag;
+
+ return 0;
+}
+
+static int rt5631_dmic_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+
+ rt5631->dmic_used_flag = ucontrol->value.integer.value[0];
+ return 0;
+}
+
+/* MIC Input Type */
+static const char *rt5631_input_mode[] = {
+ "Single ended", "Differential"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_mic1_mode_enum, RT5631_MIC_CTRL_1,
+ RT5631_MIC1_DIFF_INPUT_SHIFT, rt5631_input_mode);
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_mic2_mode_enum, RT5631_MIC_CTRL_1,
+ RT5631_MIC2_DIFF_INPUT_SHIFT, rt5631_input_mode);
+
+/* MONO Input Type */
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_monoin_mode_enum, RT5631_MONO_INPUT_VOL,
+ RT5631_MONO_DIFF_INPUT_SHIFT, rt5631_input_mode);
+
+/* SPK Ratio Gain Control */
+static const char *rt5631_spk_ratio[] = {"1.00x", "1.09x", "1.27x", "1.44x",
+ "1.56x", "1.68x", "1.99x", "2.34x"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_spk_ratio_enum, RT5631_GEN_PUR_CTRL_REG,
+ RT5631_SPK_AMP_RATIO_CTRL_SHIFT, rt5631_spk_ratio);
+
+static const struct snd_kcontrol_new rt5631_snd_controls[] = {
+ /* MIC */
+ SOC_ENUM("MIC1 Mode Control", rt5631_mic1_mode_enum),
+ SOC_SINGLE_TLV("MIC1 Boost", RT5631_MIC_CTRL_2,
+ RT5631_MIC1_BOOST_SHIFT, 8, 0, mic_bst_tlv),
+ SOC_ENUM("MIC2 Mode Control", rt5631_mic2_mode_enum),
+ SOC_SINGLE_TLV("MIC2 Boost", RT5631_MIC_CTRL_2,
+ RT5631_MIC2_BOOST_SHIFT, 8, 0, mic_bst_tlv),
+ /* MONO IN */
+ SOC_ENUM("MONOIN Mode Control", rt5631_monoin_mode_enum),
+ SOC_DOUBLE_TLV("MONOIN_RX Capture Volume", RT5631_MONO_INPUT_VOL,
+ RT5631_L_VOL_SHIFT, RT5631_R_VOL_SHIFT,
+ RT5631_VOL_MASK, 1, in_vol_tlv),
+ /* AXI */
+ SOC_DOUBLE_TLV("AXI Capture Volume", RT5631_AUX_IN_VOL,
+ RT5631_L_VOL_SHIFT, RT5631_R_VOL_SHIFT,
+ RT5631_VOL_MASK, 1, in_vol_tlv),
+ /* DAC */
+ SOC_DOUBLE_TLV("PCM Playback Volume", RT5631_STEREO_DAC_VOL_2,
+ RT5631_L_VOL_SHIFT, RT5631_R_VOL_SHIFT,
+ RT5631_DAC_VOL_MASK, 1, dac_vol_tlv),
+ SOC_DOUBLE("PCM Playback Switch", RT5631_STEREO_DAC_VOL_1,
+ RT5631_L_MUTE_SHIFT, RT5631_R_MUTE_SHIFT, 1, 1),
+ /* AXO */
+ SOC_SINGLE("AXO1 Playback Switch", RT5631_MONO_AXO_1_2_VOL,
+ RT5631_L_MUTE_SHIFT, 1, 1),
+ SOC_SINGLE("AXO2 Playback Switch", RT5631_MONO_AXO_1_2_VOL,
+ RT5631_R_VOL_SHIFT, 1, 1),
+ /* OUTVOL */
+ SOC_DOUBLE("OUTVOL Channel Switch", RT5631_SPK_OUT_VOL,
+ RT5631_L_EN_SHIFT, RT5631_R_EN_SHIFT, 1, 0),
+
+ /* SPK */
+ SOC_DOUBLE("Speaker Playback Switch", RT5631_SPK_OUT_VOL,
+ RT5631_L_MUTE_SHIFT, RT5631_R_MUTE_SHIFT, 1, 1),
+ SOC_DOUBLE_TLV("Speaker Playback Volume", RT5631_SPK_OUT_VOL,
+ RT5631_L_VOL_SHIFT, RT5631_R_VOL_SHIFT, 39, 1, out_vol_tlv),
+ /* MONO OUT */
+ SOC_SINGLE("MONO Playback Switch", RT5631_MONO_AXO_1_2_VOL,
+ RT5631_MUTE_MONO_SHIFT, 1, 1),
+ /* HP */
+ SOC_DOUBLE("HP Playback Switch", RT5631_HP_OUT_VOL,
+ RT5631_L_MUTE_SHIFT, RT5631_R_MUTE_SHIFT, 1, 1),
+ SOC_DOUBLE_TLV("HP Playback Volume", RT5631_HP_OUT_VOL,
+ RT5631_L_VOL_SHIFT, RT5631_R_VOL_SHIFT,
+ RT5631_VOL_MASK, 1, out_vol_tlv),
+ /* DMIC */
+ SOC_SINGLE_EXT("DMIC Switch", 0, 0, 1, 0,
+ rt5631_dmic_get, rt5631_dmic_put),
+ SOC_DOUBLE("DMIC Capture Switch", RT5631_DIG_MIC_CTRL,
+ RT5631_DMIC_L_CH_MUTE_SHIFT,
+ RT5631_DMIC_R_CH_MUTE_SHIFT, 1, 1),
+
+ /* SPK Ratio Gain Control */
+ SOC_ENUM("SPK Ratio Control", rt5631_spk_ratio_enum),
+};
+
+static int check_sysclk1_source(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ unsigned int reg;
+
+ reg = snd_soc_read(source->codec, RT5631_GLOBAL_CLK_CTRL);
+ return reg & RT5631_SYSCLK_SOUR_SEL_PLL;
+}
+
+static int check_dmic_used(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(source->codec);
+ return rt5631->dmic_used_flag;
+}
+
+static int check_dacl_to_outmixl(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ unsigned int reg;
+
+ reg = snd_soc_read(source->codec, RT5631_OUTMIXER_L_CTRL);
+ return !(reg & RT5631_M_DAC_L_TO_OUTMIXER_L);
+}
+
+static int check_dacr_to_outmixr(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ unsigned int reg;
+
+ reg = snd_soc_read(source->codec, RT5631_OUTMIXER_R_CTRL);
+ return !(reg & RT5631_M_DAC_R_TO_OUTMIXER_R);
+}
+
+static int check_dacl_to_spkmixl(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ unsigned int reg;
+
+ reg = snd_soc_read(source->codec, RT5631_SPK_MIXER_CTRL);
+ return !(reg & RT5631_M_DAC_L_TO_SPKMIXER_L);
+}
+
+static int check_dacr_to_spkmixr(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ unsigned int reg;
+
+ reg = snd_soc_read(source->codec, RT5631_SPK_MIXER_CTRL);
+ return !(reg & RT5631_M_DAC_R_TO_SPKMIXER_R);
+}
+
+static int check_adcl_select(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ unsigned int reg;
+
+ reg = snd_soc_read(source->codec, RT5631_ADC_REC_MIXER);
+ return !(reg & RT5631_M_MIC1_TO_RECMIXER_L);
+}
+
+static int check_adcr_select(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ unsigned int reg;
+
+ reg = snd_soc_read(source->codec, RT5631_ADC_REC_MIXER);
+ return !(reg & RT5631_M_MIC2_TO_RECMIXER_R);
+}
+
+/**
+ * onebit_depop_power_stage - auto depop in power stage.
+ * @enable: power on/off
+ *
+ * When power on/off headphone, the depop sequence is done by hardware.
+ */
+static void onebit_depop_power_stage(struct snd_soc_codec *codec, int enable)
+{
+ unsigned int soft_vol, hp_zc;
+
+ /* enable one-bit depop function */
+ snd_soc_update_bits(codec, RT5631_DEPOP_FUN_CTRL_2,
+ RT5631_EN_ONE_BIT_DEPOP, 0);
+
+ /* keep soft volume and zero crossing setting */
+ soft_vol = snd_soc_read(codec, RT5631_SOFT_VOL_CTRL);
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, 0);
+ hp_zc = snd_soc_read(codec, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+ /* config one-bit depop parameter */
+ rt5631_write_index(codec, RT5631_TEST_MODE_CTRL, 0x84c0);
+ rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x309f);
+ rt5631_write_index(codec, RT5631_CP_INTL_REG2, 0x6530);
+ /* power on capless block */
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_2,
+ RT5631_EN_CAP_FREE_DEPOP);
+ } else {
+ /* power off capless block */
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_2, 0);
+ msleep(100);
+ }
+
+ /* recover soft volume and zero crossing setting */
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, soft_vol);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc);
+}
+
+/**
+ * onebit_depop_mute_stage - auto depop in mute stage.
+ * @enable: mute/unmute
+ *
+ * When mute/unmute headphone, the depop sequence is done by hardware.
+ */
+static void onebit_depop_mute_stage(struct snd_soc_codec *codec, int enable)
+{
+ unsigned int soft_vol, hp_zc;
+
+ /* enable one-bit depop function */
+ snd_soc_update_bits(codec, RT5631_DEPOP_FUN_CTRL_2,
+ RT5631_EN_ONE_BIT_DEPOP, 0);
+
+ /* keep soft volume and zero crossing setting */
+ soft_vol = snd_soc_read(codec, RT5631_SOFT_VOL_CTRL);
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, 0);
+ hp_zc = snd_soc_read(codec, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+ schedule_timeout_uninterruptible(msecs_to_jiffies(10));
+ /* config one-bit depop parameter */
+ rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x307f);
+ snd_soc_update_bits(codec, RT5631_HP_OUT_VOL,
+ RT5631_L_MUTE | RT5631_R_MUTE, 0);
+ msleep(300);
+ } else {
+ snd_soc_update_bits(codec, RT5631_HP_OUT_VOL,
+ RT5631_L_MUTE | RT5631_R_MUTE,
+ RT5631_L_MUTE | RT5631_R_MUTE);
+ msleep(100);
+ }
+
+ /* recover soft volume and zero crossing setting */
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, soft_vol);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc);
+}
+
+/**
+ * onebit_depop_power_stage - step by step depop sequence in power stage.
+ * @enable: power on/off
+ *
+ * When power on/off headphone, the depop sequence is done in step by step.
+ */
+static void depop_seq_power_stage(struct snd_soc_codec *codec, int enable)
+{
+ unsigned int soft_vol, hp_zc;
+
+ /* depop control by register */
+ snd_soc_update_bits(codec, RT5631_DEPOP_FUN_CTRL_2,
+ RT5631_EN_ONE_BIT_DEPOP, RT5631_EN_ONE_BIT_DEPOP);
+
+ /* keep soft volume and zero crossing setting */
+ soft_vol = snd_soc_read(codec, RT5631_SOFT_VOL_CTRL);
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, 0);
+ hp_zc = snd_soc_read(codec, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+ /* config depop sequence parameter */
+ rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x303e);
+
+ /* power on headphone and charge pump */
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_CHARGE_PUMP | RT5631_PWR_HP_L_AMP |
+ RT5631_PWR_HP_R_AMP,
+ RT5631_PWR_CHARGE_PUMP | RT5631_PWR_HP_L_AMP |
+ RT5631_PWR_HP_R_AMP);
+
+ /* power on soft generator and depop mode2 */
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_1,
+ RT5631_POW_ON_SOFT_GEN | RT5631_EN_DEPOP2_FOR_HP);
+ msleep(100);
+
+ /* stop depop mode */
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_HP_DEPOP_DIS, RT5631_PWR_HP_DEPOP_DIS);
+ } else {
+ /* config depop sequence parameter */
+ rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x303F);
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_1,
+ RT5631_POW_ON_SOFT_GEN | RT5631_EN_MUTE_UNMUTE_DEPOP |
+ RT5631_PD_HPAMP_L_ST_UP | RT5631_PD_HPAMP_R_ST_UP);
+ msleep(75);
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_1,
+ RT5631_POW_ON_SOFT_GEN | RT5631_PD_HPAMP_L_ST_UP |
+ RT5631_PD_HPAMP_R_ST_UP);
+
+ /* start depop mode */
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_HP_DEPOP_DIS, 0);
+
+ /* config depop sequence parameter */
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_1,
+ RT5631_POW_ON_SOFT_GEN | RT5631_EN_DEPOP2_FOR_HP |
+ RT5631_PD_HPAMP_L_ST_UP | RT5631_PD_HPAMP_R_ST_UP);
+ msleep(80);
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_1,
+ RT5631_POW_ON_SOFT_GEN);
+
+ /* power down headphone and charge pump */
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_CHARGE_PUMP | RT5631_PWR_HP_L_AMP |
+ RT5631_PWR_HP_R_AMP, 0);
+ }
+
+ /* recover soft volume and zero crossing setting */
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, soft_vol);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc);
+}
+
+/**
+ * depop_seq_mute_stage - step by step depop sequence in mute stage.
+ * @enable: mute/unmute
+ *
+ * When mute/unmute headphone, the depop sequence is done in step by step.
+ */
+static void depop_seq_mute_stage(struct snd_soc_codec *codec, int enable)
+{
+ unsigned int soft_vol, hp_zc;
+
+ /* depop control by register */
+ snd_soc_update_bits(codec, RT5631_DEPOP_FUN_CTRL_2,
+ RT5631_EN_ONE_BIT_DEPOP, RT5631_EN_ONE_BIT_DEPOP);
+
+ /* keep soft volume and zero crossing setting */
+ soft_vol = snd_soc_read(codec, RT5631_SOFT_VOL_CTRL);
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, 0);
+ hp_zc = snd_soc_read(codec, RT5631_INT_ST_IRQ_CTRL_2);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc & 0xf7ff);
+ if (enable) {
+ schedule_timeout_uninterruptible(msecs_to_jiffies(10));
+
+ /* config depop sequence parameter */
+ rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x302f);
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_1,
+ RT5631_POW_ON_SOFT_GEN | RT5631_EN_MUTE_UNMUTE_DEPOP |
+ RT5631_EN_HP_R_M_UN_MUTE_DEPOP |
+ RT5631_EN_HP_L_M_UN_MUTE_DEPOP);
+
+ snd_soc_update_bits(codec, RT5631_HP_OUT_VOL,
+ RT5631_L_MUTE | RT5631_R_MUTE, 0);
+ msleep(160);
+ } else {
+ /* config depop sequence parameter */
+ rt5631_write_index(codec, RT5631_SPK_INTL_CTRL, 0x302f);
+ snd_soc_write(codec, RT5631_DEPOP_FUN_CTRL_1,
+ RT5631_POW_ON_SOFT_GEN | RT5631_EN_MUTE_UNMUTE_DEPOP |
+ RT5631_EN_HP_R_M_UN_MUTE_DEPOP |
+ RT5631_EN_HP_L_M_UN_MUTE_DEPOP);
+
+ snd_soc_update_bits(codec, RT5631_HP_OUT_VOL,
+ RT5631_L_MUTE | RT5631_R_MUTE,
+ RT5631_L_MUTE | RT5631_R_MUTE);
+ msleep(150);
+ }
+
+ /* recover soft volume and zero crossing setting */
+ snd_soc_write(codec, RT5631_SOFT_VOL_CTRL, soft_vol);
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, hp_zc);
+}
+
+static int hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMD:
+ if (rt5631->codec_version) {
+ onebit_depop_mute_stage(codec, 0);
+ onebit_depop_power_stage(codec, 0);
+ } else {
+ depop_seq_mute_stage(codec, 0);
+ depop_seq_power_stage(codec, 0);
+ }
+ break;
+
+ case SND_SOC_DAPM_POST_PMU:
+ if (rt5631->codec_version) {
+ onebit_depop_power_stage(codec, 1);
+ onebit_depop_mute_stage(codec, 1);
+ } else {
+ depop_seq_power_stage(codec, 1);
+ depop_seq_mute_stage(codec, 1);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int set_dmic_params(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+
+ switch (rt5631->rx_rate) {
+ case 44100:
+ case 48000:
+ snd_soc_update_bits(codec, RT5631_DIG_MIC_CTRL,
+ RT5631_DMIC_CLK_CTRL_MASK,
+ RT5631_DMIC_CLK_CTRL_TO_32FS);
+ break;
+
+ case 32000:
+ case 22050:
+ snd_soc_update_bits(codec, RT5631_DIG_MIC_CTRL,
+ RT5631_DMIC_CLK_CTRL_MASK,
+ RT5631_DMIC_CLK_CTRL_TO_64FS);
+ break;
+
+ case 16000:
+ case 11025:
+ case 8000:
+ snd_soc_update_bits(codec, RT5631_DIG_MIC_CTRL,
+ RT5631_DMIC_CLK_CTRL_MASK,
+ RT5631_DMIC_CLK_CTRL_TO_128FS);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new rt5631_recmixl_mixer_controls[] = {
+ SOC_DAPM_SINGLE("OUTMIXL Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_OUTMIXL_RECMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC1_BST1 Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_MIC1_RECMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("AXILVOL Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_AXIL_RECMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MONOIN_RX Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_MONO_IN_RECMIXL_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_recmixr_mixer_controls[] = {
+ SOC_DAPM_SINGLE("MONOIN_RX Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_MONO_IN_RECMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("AXIRVOL Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_AXIR_RECMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC2_BST2 Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_MIC2_RECMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("OUTMIXR Capture Switch", RT5631_ADC_REC_MIXER,
+ RT5631_M_OUTMIXR_RECMIXR_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_spkmixl_mixer_controls[] = {
+ SOC_DAPM_SINGLE("RECMIXL Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_RECMIXL_SPKMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC1_P Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_MIC1P_SPKMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("DACL Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_DACL_SPKMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("OUTMIXL Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_OUTMIXL_SPKMIXL_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_spkmixr_mixer_controls[] = {
+ SOC_DAPM_SINGLE("OUTMIXR Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_OUTMIXR_SPKMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("DACR Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_DACR_SPKMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC2_P Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_MIC2P_SPKMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("RECMIXR Playback Switch", RT5631_SPK_MIXER_CTRL,
+ RT5631_M_RECMIXR_SPKMIXR_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_outmixl_mixer_controls[] = {
+ SOC_DAPM_SINGLE("RECMIXL Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_RECMIXL_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("RECMIXR Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_RECMIXR_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("DACL Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_DACL_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC1_BST1 Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_MIC1_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC2_BST2 Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_MIC2_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MONOIN_RXP Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_MONO_INP_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("AXILVOL Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_AXIL_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("AXIRVOL Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_AXIR_OUTMIXL_BIT, 1, 1),
+ SOC_DAPM_SINGLE("VDAC Playback Switch", RT5631_OUTMIXER_L_CTRL,
+ RT5631_M_VDAC_OUTMIXL_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_outmixr_mixer_controls[] = {
+ SOC_DAPM_SINGLE("VDAC Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_VDAC_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("AXIRVOL Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_AXIR_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("AXILVOL Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_AXIL_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MONOIN_RXN Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_MONO_INN_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC2_BST2 Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_MIC2_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC1_BST1 Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_MIC1_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("DACR Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_DACR_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("RECMIXR Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_RECMIXR_OUTMIXR_BIT, 1, 1),
+ SOC_DAPM_SINGLE("RECMIXL Playback Switch", RT5631_OUTMIXER_R_CTRL,
+ RT5631_M_RECMIXL_OUTMIXR_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_AXO1MIX_mixer_controls[] = {
+ SOC_DAPM_SINGLE("MIC1_BST1 Playback Switch", RT5631_AXO1MIXER_CTRL,
+ RT5631_M_MIC1_AXO1MIX_BIT , 1, 1),
+ SOC_DAPM_SINGLE("MIC2_BST2 Playback Switch", RT5631_AXO1MIXER_CTRL,
+ RT5631_M_MIC2_AXO1MIX_BIT, 1, 1),
+ SOC_DAPM_SINGLE("OUTVOLL Playback Switch", RT5631_AXO1MIXER_CTRL,
+ RT5631_M_OUTMIXL_AXO1MIX_BIT , 1 , 1),
+ SOC_DAPM_SINGLE("OUTVOLR Playback Switch", RT5631_AXO1MIXER_CTRL,
+ RT5631_M_OUTMIXR_AXO1MIX_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_AXO2MIX_mixer_controls[] = {
+ SOC_DAPM_SINGLE("MIC1_BST1 Playback Switch", RT5631_AXO2MIXER_CTRL,
+ RT5631_M_MIC1_AXO2MIX_BIT, 1, 1),
+ SOC_DAPM_SINGLE("MIC2_BST2 Playback Switch", RT5631_AXO2MIXER_CTRL,
+ RT5631_M_MIC2_AXO2MIX_BIT, 1, 1),
+ SOC_DAPM_SINGLE("OUTVOLL Playback Switch", RT5631_AXO2MIXER_CTRL,
+ RT5631_M_OUTMIXL_AXO2MIX_BIT, 1, 1),
+ SOC_DAPM_SINGLE("OUTVOLR Playback Switch", RT5631_AXO2MIXER_CTRL,
+ RT5631_M_OUTMIXR_AXO2MIX_BIT, 1 , 1),
+};
+
+static const struct snd_kcontrol_new rt5631_spolmix_mixer_controls[] = {
+ SOC_DAPM_SINGLE("SPKVOLL Playback Switch", RT5631_SPK_MONO_OUT_CTRL,
+ RT5631_M_SPKVOLL_SPOLMIX_BIT, 1, 1),
+ SOC_DAPM_SINGLE("SPKVOLR Playback Switch", RT5631_SPK_MONO_OUT_CTRL,
+ RT5631_M_SPKVOLR_SPOLMIX_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_spormix_mixer_controls[] = {
+ SOC_DAPM_SINGLE("SPKVOLL Playback Switch", RT5631_SPK_MONO_OUT_CTRL,
+ RT5631_M_SPKVOLL_SPORMIX_BIT, 1, 1),
+ SOC_DAPM_SINGLE("SPKVOLR Playback Switch", RT5631_SPK_MONO_OUT_CTRL,
+ RT5631_M_SPKVOLR_SPORMIX_BIT, 1, 1),
+};
+
+static const struct snd_kcontrol_new rt5631_monomix_mixer_controls[] = {
+ SOC_DAPM_SINGLE("OUTVOLL Playback Switch", RT5631_SPK_MONO_OUT_CTRL,
+ RT5631_M_OUTVOLL_MONOMIX_BIT, 1, 1),
+ SOC_DAPM_SINGLE("OUTVOLR Playback Switch", RT5631_SPK_MONO_OUT_CTRL,
+ RT5631_M_OUTVOLR_MONOMIX_BIT, 1, 1),
+};
+
+/* Left SPK Volume Input */
+static const char *rt5631_spkvoll_sel[] = {"Vmid", "SPKMIXL"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_spkvoll_enum, RT5631_SPK_OUT_VOL,
+ RT5631_L_EN_SHIFT, rt5631_spkvoll_sel);
+
+static const struct snd_kcontrol_new rt5631_spkvoll_mux_control =
+ SOC_DAPM_ENUM("Left SPKVOL SRC", rt5631_spkvoll_enum);
+
+/* Left HP Volume Input */
+static const char *rt5631_hpvoll_sel[] = {"Vmid", "OUTMIXL"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_hpvoll_enum, RT5631_HP_OUT_VOL,
+ RT5631_L_EN_SHIFT, rt5631_hpvoll_sel);
+
+static const struct snd_kcontrol_new rt5631_hpvoll_mux_control =
+ SOC_DAPM_ENUM("Left HPVOL SRC", rt5631_hpvoll_enum);
+
+/* Left Out Volume Input */
+static const char *rt5631_outvoll_sel[] = {"Vmid", "OUTMIXL"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_outvoll_enum, RT5631_MONO_AXO_1_2_VOL,
+ RT5631_L_EN_SHIFT, rt5631_outvoll_sel);
+
+static const struct snd_kcontrol_new rt5631_outvoll_mux_control =
+ SOC_DAPM_ENUM("Left OUTVOL SRC", rt5631_outvoll_enum);
+
+/* Right Out Volume Input */
+static const char *rt5631_outvolr_sel[] = {"Vmid", "OUTMIXR"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_outvolr_enum, RT5631_MONO_AXO_1_2_VOL,
+ RT5631_R_EN_SHIFT, rt5631_outvolr_sel);
+
+static const struct snd_kcontrol_new rt5631_outvolr_mux_control =
+ SOC_DAPM_ENUM("Right OUTVOL SRC", rt5631_outvolr_enum);
+
+/* Right HP Volume Input */
+static const char *rt5631_hpvolr_sel[] = {"Vmid", "OUTMIXR"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_hpvolr_enum, RT5631_HP_OUT_VOL,
+ RT5631_R_EN_SHIFT, rt5631_hpvolr_sel);
+
+static const struct snd_kcontrol_new rt5631_hpvolr_mux_control =
+ SOC_DAPM_ENUM("Right HPVOL SRC", rt5631_hpvolr_enum);
+
+/* Right SPK Volume Input */
+static const char *rt5631_spkvolr_sel[] = {"Vmid", "SPKMIXR"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_spkvolr_enum, RT5631_SPK_OUT_VOL,
+ RT5631_R_EN_SHIFT, rt5631_spkvolr_sel);
+
+static const struct snd_kcontrol_new rt5631_spkvolr_mux_control =
+ SOC_DAPM_ENUM("Right SPKVOL SRC", rt5631_spkvolr_enum);
+
+/* SPO Left Channel Input */
+static const char *rt5631_spol_src_sel[] = {
+ "SPOLMIX", "MONOIN_RX", "VDAC", "DACL"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_spol_src_enum, RT5631_SPK_MONO_HP_OUT_CTRL,
+ RT5631_SPK_L_MUX_SEL_SHIFT, rt5631_spol_src_sel);
+
+static const struct snd_kcontrol_new rt5631_spol_mux_control =
+ SOC_DAPM_ENUM("SPOL SRC", rt5631_spol_src_enum);
+
+/* SPO Right Channel Input */
+static const char *rt5631_spor_src_sel[] = {
+ "SPORMIX", "MONOIN_RX", "VDAC", "DACR"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_spor_src_enum, RT5631_SPK_MONO_HP_OUT_CTRL,
+ RT5631_SPK_R_MUX_SEL_SHIFT, rt5631_spor_src_sel);
+
+static const struct snd_kcontrol_new rt5631_spor_mux_control =
+ SOC_DAPM_ENUM("SPOR SRC", rt5631_spor_src_enum);
+
+/* MONO Input */
+static const char *rt5631_mono_src_sel[] = {"MONOMIX", "MONOIN_RX", "VDAC"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_mono_src_enum, RT5631_SPK_MONO_HP_OUT_CTRL,
+ RT5631_MONO_MUX_SEL_SHIFT, rt5631_mono_src_sel);
+
+static const struct snd_kcontrol_new rt5631_mono_mux_control =
+ SOC_DAPM_ENUM("MONO SRC", rt5631_mono_src_enum);
+
+/* Left HPO Input */
+static const char *rt5631_hpl_src_sel[] = {"Left HPVOL", "Left DAC"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_hpl_src_enum, RT5631_SPK_MONO_HP_OUT_CTRL,
+ RT5631_HP_L_MUX_SEL_SHIFT, rt5631_hpl_src_sel);
+
+static const struct snd_kcontrol_new rt5631_hpl_mux_control =
+ SOC_DAPM_ENUM("HPL SRC", rt5631_hpl_src_enum);
+
+/* Right HPO Input */
+static const char *rt5631_hpr_src_sel[] = {"Right HPVOL", "Right DAC"};
+
+static const SOC_ENUM_SINGLE_DECL(
+ rt5631_hpr_src_enum, RT5631_SPK_MONO_HP_OUT_CTRL,
+ RT5631_HP_R_MUX_SEL_SHIFT, rt5631_hpr_src_sel);
+
+static const struct snd_kcontrol_new rt5631_hpr_mux_control =
+ SOC_DAPM_ENUM("HPR SRC", rt5631_hpr_src_enum);
+
+static const struct snd_soc_dapm_widget rt5631_dapm_widgets[] = {
+ /* Vmid */
+ SND_SOC_DAPM_VMID("Vmid"),
+ /* PLL1 */
+ SND_SOC_DAPM_SUPPLY("PLL1", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_PLL1_BIT, 0, NULL, 0),
+
+ /* Input Side */
+ /* Input Lines */
+ SND_SOC_DAPM_INPUT("MIC1"),
+ SND_SOC_DAPM_INPUT("MIC2"),
+ SND_SOC_DAPM_INPUT("AXIL"),
+ SND_SOC_DAPM_INPUT("AXIR"),
+ SND_SOC_DAPM_INPUT("MONOIN_RXN"),
+ SND_SOC_DAPM_INPUT("MONOIN_RXP"),
+ SND_SOC_DAPM_INPUT("DMIC"),
+
+ /* MICBIAS */
+ SND_SOC_DAPM_MICBIAS("MIC Bias1", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_MICBIAS1_VOL_BIT, 0),
+ SND_SOC_DAPM_MICBIAS("MIC Bias2", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_MICBIAS2_VOL_BIT, 0),
+
+ /* Boost */
+ SND_SOC_DAPM_PGA("MIC1 Boost", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_MIC1_BOOT_GAIN_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("MIC2 Boost", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_MIC2_BOOT_GAIN_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("MONOIN_RXP Boost", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_MONO_IN_P_VOL_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("MONOIN_RXN Boost", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_MONO_IN_N_VOL_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("AXIL Boost", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_AXIL_IN_VOL_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("AXIR Boost", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_AXIR_IN_VOL_BIT, 0, NULL, 0),
+
+ /* MONO In */
+ SND_SOC_DAPM_MIXER("MONO_IN", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ /* REC Mixer */
+ SND_SOC_DAPM_MIXER("RECMIXL Mixer", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_RECMIXER_L_BIT, 0,
+ &rt5631_recmixl_mixer_controls[0],
+ ARRAY_SIZE(rt5631_recmixl_mixer_controls)),
+ SND_SOC_DAPM_MIXER("RECMIXR Mixer", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_RECMIXER_R_BIT, 0,
+ &rt5631_recmixr_mixer_controls[0],
+ ARRAY_SIZE(rt5631_recmixr_mixer_controls)),
+ /* Because of record duplication for L/R channel,
+ * L/R ADCs need power up at the same time */
+ SND_SOC_DAPM_MIXER("ADC Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ /* DMIC */
+ SND_SOC_DAPM_SUPPLY("DMIC Supply", RT5631_DIG_MIC_CTRL,
+ RT5631_DMIC_ENA_SHIFT, 0,
+ set_dmic_params, SND_SOC_DAPM_PRE_PMU),
+ /* ADC Data Srouce */
+ SND_SOC_DAPM_SUPPLY("Left ADC Select", RT5631_INT_ST_IRQ_CTRL_2,
+ RT5631_ADC_DATA_SEL_MIC1_SHIFT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Right ADC Select", RT5631_INT_ST_IRQ_CTRL_2,
+ RT5631_ADC_DATA_SEL_MIC2_SHIFT, 0, NULL, 0),
+
+ /* ADCs */
+ SND_SOC_DAPM_ADC("Left ADC", "HIFI Capture",
+ RT5631_PWR_MANAG_ADD1, RT5631_PWR_ADC_L_CLK_BIT, 0),
+ SND_SOC_DAPM_ADC("Right ADC", "HIFI Capture",
+ RT5631_PWR_MANAG_ADD1, RT5631_PWR_ADC_R_CLK_BIT, 0),
+
+ /* DAC and ADC supply power */
+ SND_SOC_DAPM_SUPPLY("I2S", RT5631_PWR_MANAG_ADD1,
+ RT5631_PWR_MAIN_I2S_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("DAC REF", RT5631_PWR_MANAG_ADD1,
+ RT5631_PWR_DAC_REF_BIT, 0, NULL, 0),
+
+ /* Output Side */
+ /* DACs */
+ SND_SOC_DAPM_DAC("Left DAC", "HIFI Playback",
+ RT5631_PWR_MANAG_ADD1, RT5631_PWR_DAC_L_CLK_BIT, 0),
+ SND_SOC_DAPM_DAC("Right DAC", "HIFI Playback",
+ RT5631_PWR_MANAG_ADD1, RT5631_PWR_DAC_R_CLK_BIT, 0),
+ SND_SOC_DAPM_DAC("Voice DAC", "Voice DAC Mono Playback",
+ SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_PGA("Voice DAC Boost", SND_SOC_NOPM, 0, 0, NULL, 0),
+ /* DAC supply power */
+ SND_SOC_DAPM_SUPPLY("Left DAC To Mixer", RT5631_PWR_MANAG_ADD1,
+ RT5631_PWR_DAC_L_TO_MIXER_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Right DAC To Mixer", RT5631_PWR_MANAG_ADD1,
+ RT5631_PWR_DAC_R_TO_MIXER_BIT, 0, NULL, 0),
+
+ /* Left SPK Mixer */
+ SND_SOC_DAPM_MIXER("SPKMIXL Mixer", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_SPKMIXER_L_BIT, 0,
+ &rt5631_spkmixl_mixer_controls[0],
+ ARRAY_SIZE(rt5631_spkmixl_mixer_controls)),
+ /* Left Out Mixer */
+ SND_SOC_DAPM_MIXER("OUTMIXL Mixer", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_OUTMIXER_L_BIT, 0,
+ &rt5631_outmixl_mixer_controls[0],
+ ARRAY_SIZE(rt5631_outmixl_mixer_controls)),
+ /* Right Out Mixer */
+ SND_SOC_DAPM_MIXER("OUTMIXR Mixer", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_OUTMIXER_R_BIT, 0,
+ &rt5631_outmixr_mixer_controls[0],
+ ARRAY_SIZE(rt5631_outmixr_mixer_controls)),
+ /* Right SPK Mixer */
+ SND_SOC_DAPM_MIXER("SPKMIXR Mixer", RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_SPKMIXER_R_BIT, 0,
+ &rt5631_spkmixr_mixer_controls[0],
+ ARRAY_SIZE(rt5631_spkmixr_mixer_controls)),
+
+ /* Volume Mux */
+ SND_SOC_DAPM_MUX("Left SPKVOL Mux", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_SPK_L_VOL_BIT, 0,
+ &rt5631_spkvoll_mux_control),
+ SND_SOC_DAPM_MUX("Left HPVOL Mux", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_HP_L_OUT_VOL_BIT, 0,
+ &rt5631_hpvoll_mux_control),
+ SND_SOC_DAPM_MUX("Left OUTVOL Mux", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_LOUT_VOL_BIT, 0,
+ &rt5631_outvoll_mux_control),
+ SND_SOC_DAPM_MUX("Right OUTVOL Mux", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_ROUT_VOL_BIT, 0,
+ &rt5631_outvolr_mux_control),
+ SND_SOC_DAPM_MUX("Right HPVOL Mux", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_HP_R_OUT_VOL_BIT, 0,
+ &rt5631_hpvolr_mux_control),
+ SND_SOC_DAPM_MUX("Right SPKVOL Mux", RT5631_PWR_MANAG_ADD4,
+ RT5631_PWR_SPK_R_VOL_BIT, 0,
+ &rt5631_spkvolr_mux_control),
+
+ /* DAC To HP */
+ SND_SOC_DAPM_PGA_S("Left DAC_HP", 0, SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("Right DAC_HP", 0, SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ /* HP Depop */
+ SND_SOC_DAPM_PGA_S("HP Depop", 1, SND_SOC_NOPM, 0, 0,
+ hp_event, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
+
+ /* AXO1 Mixer */
+ SND_SOC_DAPM_MIXER("AXO1MIX Mixer", RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_AXO1MIXER_BIT, 0,
+ &rt5631_AXO1MIX_mixer_controls[0],
+ ARRAY_SIZE(rt5631_AXO1MIX_mixer_controls)),
+ /* SPOL Mixer */
+ SND_SOC_DAPM_MIXER("SPOLMIX Mixer", SND_SOC_NOPM, 0, 0,
+ &rt5631_spolmix_mixer_controls[0],
+ ARRAY_SIZE(rt5631_spolmix_mixer_controls)),
+ /* MONO Mixer */
+ SND_SOC_DAPM_MIXER("MONOMIX Mixer", RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_MONOMIXER_BIT, 0,
+ &rt5631_monomix_mixer_controls[0],
+ ARRAY_SIZE(rt5631_monomix_mixer_controls)),
+ /* SPOR Mixer */
+ SND_SOC_DAPM_MIXER("SPORMIX Mixer", SND_SOC_NOPM, 0, 0,
+ &rt5631_spormix_mixer_controls[0],
+ ARRAY_SIZE(rt5631_spormix_mixer_controls)),
+ /* AXO2 Mixer */
+ SND_SOC_DAPM_MIXER("AXO2MIX Mixer", RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_AXO2MIXER_BIT, 0,
+ &rt5631_AXO2MIX_mixer_controls[0],
+ ARRAY_SIZE(rt5631_AXO2MIX_mixer_controls)),
+
+ /* Mux */
+ SND_SOC_DAPM_MUX("SPOL Mux", SND_SOC_NOPM, 0, 0,
+ &rt5631_spol_mux_control),
+ SND_SOC_DAPM_MUX("SPOR Mux", SND_SOC_NOPM, 0, 0,
+ &rt5631_spor_mux_control),
+ SND_SOC_DAPM_MUX("MONO Mux", SND_SOC_NOPM, 0, 0,
+ &rt5631_mono_mux_control),
+ SND_SOC_DAPM_MUX("HPL Mux", SND_SOC_NOPM, 0, 0,
+ &rt5631_hpl_mux_control),
+ SND_SOC_DAPM_MUX("HPR Mux", SND_SOC_NOPM, 0, 0,
+ &rt5631_hpr_mux_control),
+
+ /* AMP supply */
+ SND_SOC_DAPM_SUPPLY("MONO Depop", RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_MONO_DEPOP_DIS_BIT, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Class D", RT5631_PWR_MANAG_ADD1,
+ RT5631_PWR_CLASS_D_BIT, 0, NULL, 0),
+
+ /* Output Lines */
+ SND_SOC_DAPM_OUTPUT("AUXO1"),
+ SND_SOC_DAPM_OUTPUT("AUXO2"),
+ SND_SOC_DAPM_OUTPUT("SPOL"),
+ SND_SOC_DAPM_OUTPUT("SPOR"),
+ SND_SOC_DAPM_OUTPUT("HPOL"),
+ SND_SOC_DAPM_OUTPUT("HPOR"),
+ SND_SOC_DAPM_OUTPUT("MONO"),
+};
+
+static const struct snd_soc_dapm_route rt5631_dapm_routes[] = {
+ {"MIC1 Boost", NULL, "MIC1"},
+ {"MIC2 Boost", NULL, "MIC2"},
+ {"MONOIN_RXP Boost", NULL, "MONOIN_RXP"},
+ {"MONOIN_RXN Boost", NULL, "MONOIN_RXN"},
+ {"AXIL Boost", NULL, "AXIL"},
+ {"AXIR Boost", NULL, "AXIR"},
+
+ {"MONO_IN", NULL, "MONOIN_RXP Boost"},
+ {"MONO_IN", NULL, "MONOIN_RXN Boost"},
+
+ {"RECMIXL Mixer", "OUTMIXL Capture Switch", "OUTMIXL Mixer"},
+ {"RECMIXL Mixer", "MIC1_BST1 Capture Switch", "MIC1 Boost"},
+ {"RECMIXL Mixer", "AXILVOL Capture Switch", "AXIL Boost"},
+ {"RECMIXL Mixer", "MONOIN_RX Capture Switch", "MONO_IN"},
+
+ {"RECMIXR Mixer", "OUTMIXR Capture Switch", "OUTMIXR Mixer"},
+ {"RECMIXR Mixer", "MIC2_BST2 Capture Switch", "MIC2 Boost"},
+ {"RECMIXR Mixer", "AXIRVOL Capture Switch", "AXIR Boost"},
+ {"RECMIXR Mixer", "MONOIN_RX Capture Switch", "MONO_IN"},
+
+ {"ADC Mixer", NULL, "RECMIXL Mixer"},
+ {"ADC Mixer", NULL, "RECMIXR Mixer"},
+
+ {"Left ADC", NULL, "ADC Mixer"},
+ {"Left ADC", NULL, "Left ADC Select", check_adcl_select},
+ {"Left ADC", NULL, "PLL1", check_sysclk1_source},
+ {"Left ADC", NULL, "I2S"},
+ {"Left ADC", NULL, "DAC REF"},
+
+ {"Right ADC", NULL, "ADC Mixer"},
+ {"Right ADC", NULL, "Right ADC Select", check_adcr_select},
+ {"Right ADC", NULL, "PLL1", check_sysclk1_source},
+ {"Right ADC", NULL, "I2S"},
+ {"Right ADC", NULL, "DAC REF"},
+
+ {"DMIC", NULL, "DMIC Supply", check_dmic_used},
+ {"Left ADC", NULL, "DMIC"},
+ {"Right ADC", NULL, "DMIC"},
+
+ {"Left DAC", NULL, "PLL1", check_sysclk1_source},
+ {"Left DAC", NULL, "I2S"},
+ {"Left DAC", NULL, "DAC REF"},
+ {"Right DAC", NULL, "PLL1", check_sysclk1_source},
+ {"Right DAC", NULL, "I2S"},
+ {"Right DAC", NULL, "DAC REF"},
+
+ {"Voice DAC Boost", NULL, "Voice DAC"},
+
+ {"SPKMIXL Mixer", NULL, "Left DAC To Mixer", check_dacl_to_spkmixl},
+ {"SPKMIXL Mixer", "RECMIXL Playback Switch", "RECMIXL Mixer"},
+ {"SPKMIXL Mixer", "MIC1_P Playback Switch", "MIC1"},
+ {"SPKMIXL Mixer", "DACL Playback Switch", "Left DAC"},
+ {"SPKMIXL Mixer", "OUTMIXL Playback Switch", "OUTMIXL Mixer"},
+
+ {"SPKMIXR Mixer", NULL, "Right DAC To Mixer", check_dacr_to_spkmixr},
+ {"SPKMIXR Mixer", "OUTMIXR Playback Switch", "OUTMIXR Mixer"},
+ {"SPKMIXR Mixer", "DACR Playback Switch", "Right DAC"},
+ {"SPKMIXR Mixer", "MIC2_P Playback Switch", "MIC2"},
+ {"SPKMIXR Mixer", "RECMIXR Playback Switch", "RECMIXR Mixer"},
+
+ {"OUTMIXL Mixer", NULL, "Left DAC To Mixer", check_dacl_to_outmixl},
+ {"OUTMIXL Mixer", "RECMIXL Playback Switch", "RECMIXL Mixer"},
+ {"OUTMIXL Mixer", "RECMIXR Playback Switch", "RECMIXR Mixer"},
+ {"OUTMIXL Mixer", "DACL Playback Switch", "Left DAC"},
+ {"OUTMIXL Mixer", "MIC1_BST1 Playback Switch", "MIC1 Boost"},
+ {"OUTMIXL Mixer", "MIC2_BST2 Playback Switch", "MIC2 Boost"},
+ {"OUTMIXL Mixer", "MONOIN_RXP Playback Switch", "MONOIN_RXP Boost"},
+ {"OUTMIXL Mixer", "AXILVOL Playback Switch", "AXIL Boost"},
+ {"OUTMIXL Mixer", "AXIRVOL Playback Switch", "AXIR Boost"},
+ {"OUTMIXL Mixer", "VDAC Playback Switch", "Voice DAC Boost"},
+
+ {"OUTMIXR Mixer", NULL, "Right DAC To Mixer", check_dacr_to_outmixr},
+ {"OUTMIXR Mixer", "RECMIXL Playback Switch", "RECMIXL Mixer"},
+ {"OUTMIXR Mixer", "RECMIXR Playback Switch", "RECMIXR Mixer"},
+ {"OUTMIXR Mixer", "DACR Playback Switch", "Right DAC"},
+ {"OUTMIXR Mixer", "MIC1_BST1 Playback Switch", "MIC1 Boost"},
+ {"OUTMIXR Mixer", "MIC2_BST2 Playback Switch", "MIC2 Boost"},
+ {"OUTMIXR Mixer", "MONOIN_RXN Playback Switch", "MONOIN_RXN Boost"},
+ {"OUTMIXR Mixer", "AXILVOL Playback Switch", "AXIL Boost"},
+ {"OUTMIXR Mixer", "AXIRVOL Playback Switch", "AXIR Boost"},
+ {"OUTMIXR Mixer", "VDAC Playback Switch", "Voice DAC Boost"},
+
+ {"Left SPKVOL Mux", "SPKMIXL", "SPKMIXL Mixer"},
+ {"Left SPKVOL Mux", "Vmid", "Vmid"},
+ {"Left HPVOL Mux", "OUTMIXL", "OUTMIXL Mixer"},
+ {"Left HPVOL Mux", "Vmid", "Vmid"},
+ {"Left OUTVOL Mux", "OUTMIXL", "OUTMIXL Mixer"},
+ {"Left OUTVOL Mux", "Vmid", "Vmid"},
+ {"Right OUTVOL Mux", "OUTMIXR", "OUTMIXR Mixer"},
+ {"Right OUTVOL Mux", "Vmid", "Vmid"},
+ {"Right HPVOL Mux", "OUTMIXR", "OUTMIXR Mixer"},
+ {"Right HPVOL Mux", "Vmid", "Vmid"},
+ {"Right SPKVOL Mux", "SPKMIXR", "SPKMIXR Mixer"},
+ {"Right SPKVOL Mux", "Vmid", "Vmid"},
+
+ {"AXO1MIX Mixer", "MIC1_BST1 Playback Switch", "MIC1 Boost"},
+ {"AXO1MIX Mixer", "OUTVOLL Playback Switch", "Left OUTVOL Mux"},
+ {"AXO1MIX Mixer", "OUTVOLR Playback Switch", "Right OUTVOL Mux"},
+ {"AXO1MIX Mixer", "MIC2_BST2 Playback Switch", "MIC2 Boost"},
+
+ {"AXO2MIX Mixer", "MIC1_BST1 Playback Switch", "MIC1 Boost"},
+ {"AXO2MIX Mixer", "OUTVOLL Playback Switch", "Left OUTVOL Mux"},
+ {"AXO2MIX Mixer", "OUTVOLR Playback Switch", "Right OUTVOL Mux"},
+ {"AXO2MIX Mixer", "MIC2_BST2 Playback Switch", "MIC2 Boost"},
+
+ {"SPOLMIX Mixer", "SPKVOLL Playback Switch", "Left SPKVOL Mux"},
+ {"SPOLMIX Mixer", "SPKVOLR Playback Switch", "Right SPKVOL Mux"},
+
+ {"SPORMIX Mixer", "SPKVOLL Playback Switch", "Left SPKVOL Mux"},
+ {"SPORMIX Mixer", "SPKVOLR Playback Switch", "Right SPKVOL Mux"},
+
+ {"MONOMIX Mixer", "OUTVOLL Playback Switch", "Left OUTVOL Mux"},
+ {"MONOMIX Mixer", "OUTVOLR Playback Switch", "Right OUTVOL Mux"},
+
+ {"SPOL Mux", "SPOLMIX", "SPOLMIX Mixer"},
+ {"SPOL Mux", "MONOIN_RX", "MONO_IN"},
+ {"SPOL Mux", "VDAC", "Voice DAC Boost"},
+ {"SPOL Mux", "DACL", "Left DAC"},
+
+ {"SPOR Mux", "SPORMIX", "SPORMIX Mixer"},
+ {"SPOR Mux", "MONOIN_RX", "MONO_IN"},
+ {"SPOR Mux", "VDAC", "Voice DAC Boost"},
+ {"SPOR Mux", "DACR", "Right DAC"},
+
+ {"MONO Mux", "MONOMIX", "MONOMIX Mixer"},
+ {"MONO Mux", "MONOIN_RX", "MONO_IN"},
+ {"MONO Mux", "VDAC", "Voice DAC Boost"},
+
+ {"Right DAC_HP", NULL, "Right DAC"},
+ {"Left DAC_HP", NULL, "Left DAC"},
+
+ {"HPL Mux", "Left HPVOL", "Left HPVOL Mux"},
+ {"HPL Mux", "Left DAC", "Left DAC_HP"},
+ {"HPR Mux", "Right HPVOL", "Right HPVOL Mux"},
+ {"HPR Mux", "Right DAC", "Right DAC_HP"},
+
+ {"HP Depop", NULL, "HPL Mux"},
+ {"HP Depop", NULL, "HPR Mux"},
+
+ {"AUXO1", NULL, "AXO1MIX Mixer"},
+ {"AUXO2", NULL, "AXO2MIX Mixer"},
+
+ {"SPOL", NULL, "Class D"},
+ {"SPOL", NULL, "SPOL Mux"},
+ {"SPOR", NULL, "Class D"},
+ {"SPOR", NULL, "SPOR Mux"},
+
+ {"HPOL", NULL, "HP Depop"},
+ {"HPOR", NULL, "HP Depop"},
+
+ {"MONO", NULL, "MONO Depop"},
+ {"MONO", NULL, "MONO Mux"},
+};
+
+struct coeff_clk_div {
+ u32 mclk;
+ u32 bclk;
+ u32 rate;
+ u16 reg_val;
+};
+
+/* PLL divisors */
+struct pll_div {
+ u32 pll_in;
+ u32 pll_out;
+ u16 reg_val;
+};
+
+static const struct pll_div codec_master_pll_div[] = {
+ {2048000, 8192000, 0x0ea0},
+ {3686400, 8192000, 0x4e27},
+ {12000000, 8192000, 0x456b},
+ {13000000, 8192000, 0x495f},
+ {13100000, 8192000, 0x0320},
+ {2048000, 11289600, 0xf637},
+ {3686400, 11289600, 0x2f22},
+ {12000000, 11289600, 0x3e2f},
+ {13000000, 11289600, 0x4d5b},
+ {13100000, 11289600, 0x363b},
+ {2048000, 16384000, 0x1ea0},
+ {3686400, 16384000, 0x9e27},
+ {12000000, 16384000, 0x452b},
+ {13000000, 16384000, 0x542f},
+ {13100000, 16384000, 0x03a0},
+ {2048000, 16934400, 0xe625},
+ {3686400, 16934400, 0x9126},
+ {12000000, 16934400, 0x4d2c},
+ {13000000, 16934400, 0x742f},
+ {13100000, 16934400, 0x3c27},
+ {2048000, 22579200, 0x2aa0},
+ {3686400, 22579200, 0x2f20},
+ {12000000, 22579200, 0x7e2f},
+ {13000000, 22579200, 0x742f},
+ {13100000, 22579200, 0x3c27},
+ {2048000, 24576000, 0x2ea0},
+ {3686400, 24576000, 0xee27},
+ {12000000, 24576000, 0x2915},
+ {13000000, 24576000, 0x772e},
+ {13100000, 24576000, 0x0d20},
+ {26000000, 24576000, 0x2027},
+ {26000000, 22579200, 0x392f},
+ {24576000, 22579200, 0x0921},
+ {24576000, 24576000, 0x02a0},
+};
+
+static const struct pll_div codec_slave_pll_div[] = {
+ {256000, 2048000, 0x46f0},
+ {256000, 4096000, 0x3ea0},
+ {352800, 5644800, 0x3ea0},
+ {512000, 8192000, 0x3ea0},
+ {1024000, 8192000, 0x46f0},
+ {705600, 11289600, 0x3ea0},
+ {1024000, 16384000, 0x3ea0},
+ {1411200, 22579200, 0x3ea0},
+ {1536000, 24576000, 0x3ea0},
+ {2048000, 16384000, 0x1ea0},
+ {2822400, 22579200, 0x1ea0},
+ {2822400, 45158400, 0x5ec0},
+ {5644800, 45158400, 0x46f0},
+ {3072000, 24576000, 0x1ea0},
+ {3072000, 49152000, 0x5ec0},
+ {6144000, 49152000, 0x46f0},
+ {705600, 11289600, 0x3ea0},
+ {705600, 8467200, 0x3ab0},
+ {24576000, 24576000, 0x02a0},
+ {1411200, 11289600, 0x1690},
+ {2822400, 11289600, 0x0a90},
+ {1536000, 12288000, 0x1690},
+ {3072000, 12288000, 0x0a90},
+};
+
+static struct coeff_clk_div coeff_div[] = {
+ /* sysclk is 256fs */
+ {2048000, 8000 * 32, 8000, 0x1000},
+ {2048000, 8000 * 64, 8000, 0x0000},
+ {2822400, 11025 * 32, 11025, 0x1000},
+ {2822400, 11025 * 64, 11025, 0x0000},
+ {4096000, 16000 * 32, 16000, 0x1000},
+ {4096000, 16000 * 64, 16000, 0x0000},
+ {5644800, 22050 * 32, 22050, 0x1000},
+ {5644800, 22050 * 64, 22050, 0x0000},
+ {8192000, 32000 * 32, 32000, 0x1000},
+ {8192000, 32000 * 64, 32000, 0x0000},
+ {11289600, 44100 * 32, 44100, 0x1000},
+ {11289600, 44100 * 64, 44100, 0x0000},
+ {12288000, 48000 * 32, 48000, 0x1000},
+ {12288000, 48000 * 64, 48000, 0x0000},
+ {22579200, 88200 * 32, 88200, 0x1000},
+ {22579200, 88200 * 64, 88200, 0x0000},
+ {24576000, 96000 * 32, 96000, 0x1000},
+ {24576000, 96000 * 64, 96000, 0x0000},
+ /* sysclk is 512fs */
+ {4096000, 8000 * 32, 8000, 0x3000},
+ {4096000, 8000 * 64, 8000, 0x2000},
+ {5644800, 11025 * 32, 11025, 0x3000},
+ {5644800, 11025 * 64, 11025, 0x2000},
+ {8192000, 16000 * 32, 16000, 0x3000},
+ {8192000, 16000 * 64, 16000, 0x2000},
+ {11289600, 22050 * 32, 22050, 0x3000},
+ {11289600, 22050 * 64, 22050, 0x2000},
+ {16384000, 32000 * 32, 32000, 0x3000},
+ {16384000, 32000 * 64, 32000, 0x2000},
+ {22579200, 44100 * 32, 44100, 0x3000},
+ {22579200, 44100 * 64, 44100, 0x2000},
+ {24576000, 48000 * 32, 48000, 0x3000},
+ {24576000, 48000 * 64, 48000, 0x2000},
+ {45158400, 88200 * 32, 88200, 0x3000},
+ {45158400, 88200 * 64, 88200, 0x2000},
+ {49152000, 96000 * 32, 96000, 0x3000},
+ {49152000, 96000 * 64, 96000, 0x2000},
+ /* sysclk is 24.576Mhz or 22.5792Mhz */
+ {24576000, 8000 * 32, 8000, 0x7080},
+ {24576000, 8000 * 64, 8000, 0x6080},
+ {24576000, 16000 * 32, 16000, 0x5080},
+ {24576000, 16000 * 64, 16000, 0x4080},
+ {24576000, 24000 * 32, 24000, 0x5000},
+ {24576000, 24000 * 64, 24000, 0x4000},
+ {24576000, 32000 * 32, 32000, 0x3080},
+ {24576000, 32000 * 64, 32000, 0x2080},
+ {22579200, 11025 * 32, 11025, 0x7000},
+ {22579200, 11025 * 64, 11025, 0x6000},
+ {22579200, 22050 * 32, 22050, 0x5000},
+ {22579200, 22050 * 64, 22050, 0x4000},
+};
+
+static int get_coeff(int mclk, int rate, int timesofbclk)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+ if (coeff_div[i].mclk == mclk && coeff_div[i].rate == rate &&
+ (coeff_div[i].bclk / coeff_div[i].rate) == timesofbclk)
+ return i;
+ }
+ return -EINVAL;
+}
+
+static int rt5631_hifi_pcm_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+ int timesofbclk = 32, coeff;
+ unsigned int iface = 0;
+
+ dev_dbg(codec->dev, "enter %s\n", __func__);
+
+ rt5631->bclk_rate = snd_soc_params_to_bclk(params);
+ if (rt5631->bclk_rate < 0) {
+ dev_err(codec->dev, "Fail to get BCLK rate\n");
+ return rt5631->bclk_rate;
+ }
+ rt5631->rx_rate = params_rate(params);
+
+ if (rt5631->master)
+ coeff = get_coeff(rt5631->sysclk, rt5631->rx_rate,
+ rt5631->bclk_rate / rt5631->rx_rate);
+ else
+ coeff = get_coeff(rt5631->sysclk, rt5631->rx_rate,
+ timesofbclk);
+ if (coeff < 0) {
+ dev_err(codec->dev, "Fail to get coeff\n");
+ return -EINVAL;
+ }
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ iface |= RT5631_SDP_I2S_DL_20;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iface |= RT5631_SDP_I2S_DL_24;
+ break;
+ case SNDRV_PCM_FORMAT_S8:
+ iface |= RT5631_SDP_I2S_DL_8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, RT5631_SDP_CTRL,
+ RT5631_SDP_I2S_DL_MASK, iface);
+ snd_soc_write(codec, RT5631_STEREO_AD_DA_CLK_CTRL,
+ coeff_div[coeff].reg_val);
+
+ return 0;
+}
+
+static int rt5631_hifi_codec_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+ unsigned int iface = 0;
+
+ dev_dbg(codec->dev, "enter %s\n", __func__);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ rt5631->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ iface |= RT5631_SDP_MODE_SEL_SLAVE;
+ rt5631->master = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ iface |= RT5631_SDP_I2S_DF_LEFT;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ iface |= RT5631_SDP_I2S_DF_PCM_A;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ iface |= RT5631_SDP_I2S_DF_PCM_B;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= RT5631_SDP_I2S_BCLK_POL_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, RT5631_SDP_CTRL, iface);
+
+ return 0;
+}
+
+static int rt5631_hifi_codec_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+
+ dev_dbg(codec->dev, "enter %s, syclk=%d\n", __func__, freq);
+
+ if ((freq >= (256 * 8000)) && (freq <= (512 * 96000))) {
+ rt5631->sysclk = freq;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int rt5631_codec_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+ int source, unsigned int freq_in, unsigned int freq_out)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+ int i, ret = -EINVAL;
+
+ dev_dbg(codec->dev, "enter %s\n", __func__);
+
+ if (!freq_in || !freq_out) {
+ dev_dbg(codec->dev, "PLL disabled\n");
+
+ snd_soc_update_bits(codec, RT5631_GLOBAL_CLK_CTRL,
+ RT5631_SYSCLK_SOUR_SEL_MASK,
+ RT5631_SYSCLK_SOUR_SEL_MCLK);
+
+ return 0;
+ }
+
+ if (rt5631->master) {
+ for (i = 0; i < ARRAY_SIZE(codec_master_pll_div); i++)
+ if (freq_in == codec_master_pll_div[i].pll_in &&
+ freq_out == codec_master_pll_div[i].pll_out) {
+ dev_info(codec->dev,
+ "change PLL in master mode\n");
+ snd_soc_write(codec, RT5631_PLL_CTRL,
+ codec_master_pll_div[i].reg_val);
+ schedule_timeout_uninterruptible(
+ msecs_to_jiffies(20));
+ snd_soc_update_bits(codec,
+ RT5631_GLOBAL_CLK_CTRL,
+ RT5631_SYSCLK_SOUR_SEL_MASK |
+ RT5631_PLLCLK_SOUR_SEL_MASK,
+ RT5631_SYSCLK_SOUR_SEL_PLL |
+ RT5631_PLLCLK_SOUR_SEL_MCLK);
+ ret = 0;
+ break;
+ }
+ } else {
+ for (i = 0; i < ARRAY_SIZE(codec_slave_pll_div); i++)
+ if (freq_in == codec_slave_pll_div[i].pll_in &&
+ freq_out == codec_slave_pll_div[i].pll_out) {
+ dev_info(codec->dev,
+ "change PLL in slave mode\n");
+ snd_soc_write(codec, RT5631_PLL_CTRL,
+ codec_slave_pll_div[i].reg_val);
+ schedule_timeout_uninterruptible(
+ msecs_to_jiffies(20));
+ snd_soc_update_bits(codec,
+ RT5631_GLOBAL_CLK_CTRL,
+ RT5631_SYSCLK_SOUR_SEL_MASK |
+ RT5631_PLLCLK_SOUR_SEL_MASK,
+ RT5631_SYSCLK_SOUR_SEL_PLL |
+ RT5631_PLLCLK_SOUR_SEL_BCLK);
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int rt5631_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD2,
+ RT5631_PWR_MICBIAS1_VOL | RT5631_PWR_MICBIAS2_VOL,
+ RT5631_PWR_MICBIAS1_VOL | RT5631_PWR_MICBIAS2_VOL);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_VREF | RT5631_PWR_MAIN_BIAS,
+ RT5631_PWR_VREF | RT5631_PWR_MAIN_BIAS);
+ msleep(80);
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_FAST_VREF_CTRL,
+ RT5631_PWR_FAST_VREF_CTRL);
+ codec->cache_only = false;
+ snd_soc_cache_sync(codec);
+ }
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ snd_soc_write(codec, RT5631_PWR_MANAG_ADD1, 0x0000);
+ snd_soc_write(codec, RT5631_PWR_MANAG_ADD2, 0x0000);
+ snd_soc_write(codec, RT5631_PWR_MANAG_ADD3, 0x0000);
+ snd_soc_write(codec, RT5631_PWR_MANAG_ADD4, 0x0000);
+ break;
+
+ default:
+ break;
+ }
+ codec->dapm.bias_level = level;
+
+ return 0;
+}
+
+static int rt5631_probe(struct snd_soc_codec *codec)
+{
+ struct rt5631_priv *rt5631 = snd_soc_codec_get_drvdata(codec);
+ unsigned int val;
+ int ret;
+
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ val = rt5631_read_index(codec, RT5631_ADDA_MIXER_INTL_REG3);
+ if (val & 0x0002)
+ rt5631->codec_version = 1;
+ else
+ rt5631->codec_version = 0;
+
+ rt5631_reset(codec);
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_VREF | RT5631_PWR_MAIN_BIAS,
+ RT5631_PWR_VREF | RT5631_PWR_MAIN_BIAS);
+ msleep(80);
+ snd_soc_update_bits(codec, RT5631_PWR_MANAG_ADD3,
+ RT5631_PWR_FAST_VREF_CTRL, RT5631_PWR_FAST_VREF_CTRL);
+ /* enable HP zero cross */
+ snd_soc_write(codec, RT5631_INT_ST_IRQ_CTRL_2, 0x0f18);
+ /* power off ClassD auto Recovery */
+ if (rt5631->codec_version)
+ snd_soc_update_bits(codec, RT5631_INT_ST_IRQ_CTRL_2,
+ 0x2000, 0x2000);
+ else
+ snd_soc_update_bits(codec, RT5631_INT_ST_IRQ_CTRL_2,
+ 0x2000, 0);
+ /* DMIC */
+ if (rt5631->dmic_used_flag) {
+ snd_soc_update_bits(codec, RT5631_GPIO_CTRL,
+ RT5631_GPIO_PIN_FUN_SEL_MASK |
+ RT5631_GPIO_DMIC_FUN_SEL_MASK,
+ RT5631_GPIO_PIN_FUN_SEL_GPIO_DIMC |
+ RT5631_GPIO_DMIC_FUN_SEL_DIMC);
+ snd_soc_update_bits(codec, RT5631_DIG_MIC_CTRL,
+ RT5631_DMIC_L_CH_LATCH_MASK |
+ RT5631_DMIC_R_CH_LATCH_MASK,
+ RT5631_DMIC_L_CH_LATCH_FALLING |
+ RT5631_DMIC_R_CH_LATCH_RISING);
+ }
+
+ codec->dapm.bias_level = SND_SOC_BIAS_STANDBY;
+
+ return 0;
+}
+
+static int rt5631_remove(struct snd_soc_codec *codec)
+{
+ rt5631_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int rt5631_suspend(struct snd_soc_codec *codec, pm_message_t state)
+{
+ rt5631_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int rt5631_resume(struct snd_soc_codec *codec)
+{
+ rt5631_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ return 0;
+}
+#else
+#define rt5631_suspend NULL
+#define rt5631_resume NULL
+#endif
+
+#define RT5631_STEREO_RATES SNDRV_PCM_RATE_8000_96000
+#define RT5631_FORMAT (SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | \
+ SNDRV_PCM_FMTBIT_S8)
+
+static struct snd_soc_dai_ops rt5631_ops = {
+ .hw_params = rt5631_hifi_pcm_params,
+ .set_fmt = rt5631_hifi_codec_set_dai_fmt,
+ .set_sysclk = rt5631_hifi_codec_set_dai_sysclk,
+ .set_pll = rt5631_codec_set_dai_pll,
+};
+
+static struct snd_soc_dai_driver rt5631_dai[] = {
+ {
+ .name = "rt5631-hifi",
+ .id = 1,
+ .playback = {
+ .stream_name = "HIFI Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = RT5631_STEREO_RATES,
+ .formats = RT5631_FORMAT,
+ },
+ .capture = {
+ .stream_name = "HIFI Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = RT5631_STEREO_RATES,
+ .formats = RT5631_FORMAT,
+ },
+ .ops = &rt5631_ops,
+ },
+};
+
+static struct snd_soc_codec_driver soc_codec_dev_rt5631 = {
+ .probe = rt5631_probe,
+ .remove = rt5631_remove,
+ .suspend = rt5631_suspend,
+ .resume = rt5631_resume,
+ .set_bias_level = rt5631_set_bias_level,
+ .reg_cache_size = RT5631_VENDOR_ID2 + 1,
+ .reg_word_size = sizeof(u16),
+ .reg_cache_default = rt5631_reg,
+ .volatile_register = rt5631_volatile_register,
+ .readable_register = rt5631_readable_register,
+ .reg_cache_step = 1,
+ .controls = rt5631_snd_controls,
+ .num_controls = ARRAY_SIZE(rt5631_snd_controls),
+ .dapm_widgets = rt5631_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(rt5631_dapm_widgets),
+ .dapm_routes = rt5631_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(rt5631_dapm_routes),
+};
+
+static const struct i2c_device_id rt5631_i2c_id[] = {
+ { "rt5631", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rt5631_i2c_id);
+
+static int rt5631_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct rt5631_priv *rt5631;
+ int ret;
+
+ rt5631 = kzalloc(sizeof(struct rt5631_priv), GFP_KERNEL);
+ if (NULL == rt5631)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, rt5631);
+
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5631,
+ rt5631_dai, ARRAY_SIZE(rt5631_dai));
+ if (ret < 0)
+ kfree(rt5631);
+
+ return ret;
+}
+
+static __devexit int rt5631_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+static struct i2c_driver rt5631_i2c_driver = {
+ .driver = {
+ .name = "rt5631",
+ .owner = THIS_MODULE,
+ },
+ .probe = rt5631_i2c_probe,
+ .remove = __devexit_p(rt5631_i2c_remove),
+ .id_table = rt5631_i2c_id,
+};
+
+static int __init rt5631_modinit(void)
+{
+ return i2c_add_driver(&rt5631_i2c_driver);
+}
+module_init(rt5631_modinit);
+
+static void __exit rt5631_modexit(void)
+{
+ i2c_del_driver(&rt5631_i2c_driver);
+}
+module_exit(rt5631_modexit);
+
+MODULE_DESCRIPTION("ASoC RT5631 driver");
+MODULE_AUTHOR("flove <flove@realtek.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/rt5631.h b/sound/soc/codecs/rt5631.h
new file mode 100644
index 0000000..1340158
--- /dev/null
+++ b/sound/soc/codecs/rt5631.h
@@ -0,0 +1,701 @@
+#ifndef __RTCODEC5631_H__
+#define __RTCODEC5631_H__
+
+
+#define RT5631_RESET 0x00
+#define RT5631_SPK_OUT_VOL 0x02
+#define RT5631_HP_OUT_VOL 0x04
+#define RT5631_MONO_AXO_1_2_VOL 0x06
+#define RT5631_AUX_IN_VOL 0x0A
+#define RT5631_STEREO_DAC_VOL_1 0x0C
+#define RT5631_MIC_CTRL_1 0x0E
+#define RT5631_STEREO_DAC_VOL_2 0x10
+#define RT5631_ADC_CTRL_1 0x12
+#define RT5631_ADC_REC_MIXER 0x14
+#define RT5631_ADC_CTRL_2 0x16
+#define RT5631_VDAC_DIG_VOL 0x18
+#define RT5631_OUTMIXER_L_CTRL 0x1A
+#define RT5631_OUTMIXER_R_CTRL 0x1C
+#define RT5631_AXO1MIXER_CTRL 0x1E
+#define RT5631_AXO2MIXER_CTRL 0x20
+#define RT5631_MIC_CTRL_2 0x22
+#define RT5631_DIG_MIC_CTRL 0x24
+#define RT5631_MONO_INPUT_VOL 0x26
+#define RT5631_SPK_MIXER_CTRL 0x28
+#define RT5631_SPK_MONO_OUT_CTRL 0x2A
+#define RT5631_SPK_MONO_HP_OUT_CTRL 0x2C
+#define RT5631_SDP_CTRL 0x34
+#define RT5631_MONO_SDP_CTRL 0x36
+#define RT5631_STEREO_AD_DA_CLK_CTRL 0x38
+#define RT5631_PWR_MANAG_ADD1 0x3A
+#define RT5631_PWR_MANAG_ADD2 0x3B
+#define RT5631_PWR_MANAG_ADD3 0x3C
+#define RT5631_PWR_MANAG_ADD4 0x3E
+#define RT5631_GEN_PUR_CTRL_REG 0x40
+#define RT5631_GLOBAL_CLK_CTRL 0x42
+#define RT5631_PLL_CTRL 0x44
+#define RT5631_INT_ST_IRQ_CTRL_1 0x48
+#define RT5631_INT_ST_IRQ_CTRL_2 0x4A
+#define RT5631_GPIO_CTRL 0x4C
+#define RT5631_MISC_CTRL 0x52
+#define RT5631_DEPOP_FUN_CTRL_1 0x54
+#define RT5631_DEPOP_FUN_CTRL_2 0x56
+#define RT5631_JACK_DET_CTRL 0x5A
+#define RT5631_SOFT_VOL_CTRL 0x5C
+#define RT5631_ALC_CTRL_1 0x64
+#define RT5631_ALC_CTRL_2 0x65
+#define RT5631_ALC_CTRL_3 0x66
+#define RT5631_PSEUDO_SPATL_CTRL 0x68
+#define RT5631_INDEX_ADD 0x6A
+#define RT5631_INDEX_DATA 0x6C
+#define RT5631_EQ_CTRL 0x6E
+#define RT5631_VENDOR_ID 0x7A
+#define RT5631_VENDOR_ID1 0x7C
+#define RT5631_VENDOR_ID2 0x7E
+
+/* Index of Codec Private Register definition */
+#define RT5631_EQ_BW_LOP 0x00
+#define RT5631_EQ_GAIN_LOP 0x01
+#define RT5631_EQ_FC_BP1 0x02
+#define RT5631_EQ_BW_BP1 0x03
+#define RT5631_EQ_GAIN_BP1 0x04
+#define RT5631_EQ_FC_BP2 0x05
+#define RT5631_EQ_BW_BP2 0x06
+#define RT5631_EQ_GAIN_BP2 0x07
+#define RT5631_EQ_FC_BP3 0x08
+#define RT5631_EQ_BW_BP3 0x09
+#define RT5631_EQ_GAIN_BP3 0x0a
+#define RT5631_EQ_BW_HIP 0x0b
+#define RT5631_EQ_GAIN_HIP 0x0c
+#define RT5631_EQ_HPF_A1 0x0d
+#define RT5631_EQ_HPF_A2 0x0e
+#define RT5631_EQ_HPF_GAIN 0x0f
+#define RT5631_EQ_PRE_VOL_CTRL 0x11
+#define RT5631_EQ_POST_VOL_CTRL 0x12
+#define RT5631_TEST_MODE_CTRL 0x39
+#define RT5631_CP_INTL_REG2 0x45
+#define RT5631_ADDA_MIXER_INTL_REG3 0x52
+#define RT5631_SPK_INTL_CTRL 0x56
+
+
+/* global definition */
+#define RT5631_L_MUTE (0x1 << 15)
+#define RT5631_L_MUTE_SHIFT 15
+#define RT5631_L_EN (0x1 << 14)
+#define RT5631_L_EN_SHIFT 14
+#define RT5631_R_MUTE (0x1 << 7)
+#define RT5631_R_MUTE_SHIFT 7
+#define RT5631_R_EN (0x1 << 6)
+#define RT5631_R_EN_SHIFT 6
+#define RT5631_VOL_MASK 0x1f
+#define RT5631_L_VOL_SHIFT 8
+#define RT5631_R_VOL_SHIFT 0
+
+/* Speaker Output Control(0x02) */
+#define RT5631_SPK_L_VOL_SEL_MASK (0x1 << 14)
+#define RT5631_SPK_L_VOL_SEL_VMID (0x0 << 14)
+#define RT5631_SPK_L_VOL_SEL_SPKMIX_L (0x1 << 14)
+#define RT5631_SPK_R_VOL_SEL_MASK (0x1 << 6)
+#define RT5631_SPK_R_VOL_SEL_VMID (0x0 << 6)
+#define RT5631_SPK_R_VOL_SEL_SPKMIX_R (0x1 << 6)
+
+/* Headphone Output Control(0x04) */
+#define RT5631_HP_L_VOL_SEL_MASK (0x1 << 14)
+#define RT5631_HP_L_VOL_SEL_VMID (0x0 << 14)
+#define RT5631_HP_L_VOL_SEL_OUTMIX_L (0x1 << 14)
+#define RT5631_HP_R_VOL_SEL_MASK (0x1 << 6)
+#define RT5631_HP_R_VOL_SEL_VMID (0x0 << 6)
+#define RT5631_HP_R_VOL_SEL_OUTMIX_R (0x1 << 6)
+
+/* Output Control for AUXOUT/MONO(0x06) */
+#define RT5631_AUXOUT_1_VOL_SEL_MASK (0x1 << 14)
+#define RT5631_AUXOUT_1_VOL_SEL_VMID (0x0 << 14)
+#define RT5631_AUXOUT_1_VOL_SEL_OUTMIX_L (0x1 << 14)
+#define RT5631_MUTE_MONO (0x1 << 13)
+#define RT5631_MUTE_MONO_SHIFT 13
+#define RT5631_AUXOUT_2_VOL_SEL_MASK (0x1 << 6)
+#define RT5631_AUXOUT_2_VOL_SEL_VMID (0x0 << 6)
+#define RT5631_AUXOUT_2_VOL_SEL_OUTMIX_R (0x1 << 6)
+
+/* Microphone Input Control 1(0x0E) */
+#define RT5631_MIC1_DIFF_INPUT_CTRL (0x1 << 15)
+#define RT5631_MIC1_DIFF_INPUT_SHIFT 15
+#define RT5631_MIC2_DIFF_INPUT_CTRL (0x1 << 7)
+#define RT5631_MIC2_DIFF_INPUT_SHIFT 7
+
+/* Stereo DAC Digital Volume2(0x10) */
+#define RT5631_DAC_VOL_MASK 0xff
+
+/* ADC Recording Mixer Control(0x14) */
+#define RT5631_M_OUTMIXER_L_TO_RECMIXER_L (0x1 << 15)
+#define RT5631_M_OUTMIXL_RECMIXL_BIT 15
+#define RT5631_M_MIC1_TO_RECMIXER_L (0x1 << 14)
+#define RT5631_M_MIC1_RECMIXL_BIT 14
+#define RT5631_M_AXIL_TO_RECMIXER_L (0x1 << 13)
+#define RT5631_M_AXIL_RECMIXL_BIT 13
+#define RT5631_M_MONO_IN_TO_RECMIXER_L (0x1 << 12)
+#define RT5631_M_MONO_IN_RECMIXL_BIT 12
+#define RT5631_M_OUTMIXER_R_TO_RECMIXER_R (0x1 << 7)
+#define RT5631_M_OUTMIXR_RECMIXR_BIT 7
+#define RT5631_M_MIC2_TO_RECMIXER_R (0x1 << 6)
+#define RT5631_M_MIC2_RECMIXR_BIT 6
+#define RT5631_M_AXIR_TO_RECMIXER_R (0x1 << 5)
+#define RT5631_M_AXIR_RECMIXR_BIT 5
+#define RT5631_M_MONO_IN_TO_RECMIXER_R (0x1 << 4)
+#define RT5631_M_MONO_IN_RECMIXR_BIT 4
+
+/* Left Output Mixer Control(0x1A) */
+#define RT5631_M_RECMIXER_L_TO_OUTMIXER_L (0x1 << 15)
+#define RT5631_M_RECMIXL_OUTMIXL_BIT 15
+#define RT5631_M_RECMIXER_R_TO_OUTMIXER_L (0x1 << 14)
+#define RT5631_M_RECMIXR_OUTMIXL_BIT 14
+#define RT5631_M_DAC_L_TO_OUTMIXER_L (0x1 << 13)
+#define RT5631_M_DACL_OUTMIXL_BIT 13
+#define RT5631_M_MIC1_TO_OUTMIXER_L (0x1 << 12)
+#define RT5631_M_MIC1_OUTMIXL_BIT 12
+#define RT5631_M_MIC2_TO_OUTMIXER_L (0x1 << 11)
+#define RT5631_M_MIC2_OUTMIXL_BIT 11
+#define RT5631_M_MONO_IN_P_TO_OUTMIXER_L (0x1 << 10)
+#define RT5631_M_MONO_INP_OUTMIXL_BIT 10
+#define RT5631_M_AXIL_TO_OUTMIXER_L (0x1 << 9)
+#define RT5631_M_AXIL_OUTMIXL_BIT 9
+#define RT5631_M_AXIR_TO_OUTMIXER_L (0x1 << 8)
+#define RT5631_M_AXIR_OUTMIXL_BIT 8
+#define RT5631_M_VDAC_TO_OUTMIXER_L (0x1 << 7)
+#define RT5631_M_VDAC_OUTMIXL_BIT 7
+
+/* Right Output Mixer Control(0x1C) */
+#define RT5631_M_RECMIXER_L_TO_OUTMIXER_R (0x1 << 15)
+#define RT5631_M_RECMIXL_OUTMIXR_BIT 15
+#define RT5631_M_RECMIXER_R_TO_OUTMIXER_R (0x1 << 14)
+#define RT5631_M_RECMIXR_OUTMIXR_BIT 14
+#define RT5631_M_DAC_R_TO_OUTMIXER_R (0x1 << 13)
+#define RT5631_M_DACR_OUTMIXR_BIT 13
+#define RT5631_M_MIC1_TO_OUTMIXER_R (0x1 << 12)
+#define RT5631_M_MIC1_OUTMIXR_BIT 12
+#define RT5631_M_MIC2_TO_OUTMIXER_R (0x1 << 11)
+#define RT5631_M_MIC2_OUTMIXR_BIT 11
+#define RT5631_M_MONO_IN_N_TO_OUTMIXER_R (0x1 << 10)
+#define RT5631_M_MONO_INN_OUTMIXR_BIT 10
+#define RT5631_M_AXIL_TO_OUTMIXER_R (0x1 << 9)
+#define RT5631_M_AXIL_OUTMIXR_BIT 9
+#define RT5631_M_AXIR_TO_OUTMIXER_R (0x1 << 8)
+#define RT5631_M_AXIR_OUTMIXR_BIT 8
+#define RT5631_M_VDAC_TO_OUTMIXER_R (0x1 << 7)
+#define RT5631_M_VDAC_OUTMIXR_BIT 7
+
+/* Lout Mixer Control(0x1E) */
+#define RT5631_M_MIC1_TO_AXO1MIXER (0x1 << 15)
+#define RT5631_M_MIC1_AXO1MIX_BIT 15
+#define RT5631_M_MIC2_TO_AXO1MIXER (0x1 << 11)
+#define RT5631_M_MIC2_AXO1MIX_BIT 11
+#define RT5631_M_OUTMIXER_L_TO_AXO1MIXER (0x1 << 7)
+#define RT5631_M_OUTMIXL_AXO1MIX_BIT 7
+#define RT5631_M_OUTMIXER_R_TO_AXO1MIXER (0x1 << 6)
+#define RT5631_M_OUTMIXR_AXO1MIX_BIT 6
+
+/* Rout Mixer Control(0x20) */
+#define RT5631_M_MIC1_TO_AXO2MIXER (0x1 << 15)
+#define RT5631_M_MIC1_AXO2MIX_BIT 15
+#define RT5631_M_MIC2_TO_AXO2MIXER (0x1 << 11)
+#define RT5631_M_MIC2_AXO2MIX_BIT 11
+#define RT5631_M_OUTMIXER_L_TO_AXO2MIXER (0x1 << 7)
+#define RT5631_M_OUTMIXL_AXO2MIX_BIT 7
+#define RT5631_M_OUTMIXER_R_TO_AXO2MIXER (0x1 << 6)
+#define RT5631_M_OUTMIXR_AXO2MIX_BIT 6
+
+/* Micphone Input Control 2(0x22) */
+#define RT5631_MIC_BIAS_90_PRECNET_AVDD 1
+#define RT5631_MIC_BIAS_75_PRECNET_AVDD 2
+
+#define RT5631_MIC1_BOOST_CTRL_MASK (0xf << 12)
+#define RT5631_MIC1_BOOST_CTRL_BYPASS (0x0 << 12)
+#define RT5631_MIC1_BOOST_CTRL_20DB (0x1 << 12)
+#define RT5631_MIC1_BOOST_CTRL_24DB (0x2 << 12)
+#define RT5631_MIC1_BOOST_CTRL_30DB (0x3 << 12)
+#define RT5631_MIC1_BOOST_CTRL_35DB (0x4 << 12)
+#define RT5631_MIC1_BOOST_CTRL_40DB (0x5 << 12)
+#define RT5631_MIC1_BOOST_CTRL_34DB (0x6 << 12)
+#define RT5631_MIC1_BOOST_CTRL_50DB (0x7 << 12)
+#define RT5631_MIC1_BOOST_CTRL_52DB (0x8 << 12)
+#define RT5631_MIC1_BOOST_SHIFT 12
+
+#define RT5631_MIC2_BOOST_CTRL_MASK (0xf << 8)
+#define RT5631_MIC2_BOOST_CTRL_BYPASS (0x0 << 8)
+#define RT5631_MIC2_BOOST_CTRL_20DB (0x1 << 8)
+#define RT5631_MIC2_BOOST_CTRL_24DB (0x2 << 8)
+#define RT5631_MIC2_BOOST_CTRL_30DB (0x3 << 8)
+#define RT5631_MIC2_BOOST_CTRL_35DB (0x4 << 8)
+#define RT5631_MIC2_BOOST_CTRL_40DB (0x5 << 8)
+#define RT5631_MIC2_BOOST_CTRL_34DB (0x6 << 8)
+#define RT5631_MIC2_BOOST_CTRL_50DB (0x7 << 8)
+#define RT5631_MIC2_BOOST_CTRL_52DB (0x8 << 8)
+#define RT5631_MIC2_BOOST_SHIFT 8
+
+#define RT5631_MICBIAS1_VOLT_CTRL_MASK (0x1 << 7)
+#define RT5631_MICBIAS1_VOLT_CTRL_90P (0x0 << 7)
+#define RT5631_MICBIAS1_VOLT_CTRL_75P (0x1 << 7)
+
+#define RT5631_MICBIAS1_S_C_DET_MASK (0x1 << 6)
+#define RT5631_MICBIAS1_S_C_DET_DIS (0x0 << 6)
+#define RT5631_MICBIAS1_S_C_DET_ENA (0x1 << 6)
+
+#define RT5631_MICBIAS1_SHORT_CURR_DET_MASK (0x3 << 4)
+#define RT5631_MICBIAS1_SHORT_CURR_DET_600UA (0x0 << 4)
+#define RT5631_MICBIAS1_SHORT_CURR_DET_1500UA (0x1 << 4)
+#define RT5631_MICBIAS1_SHORT_CURR_DET_2000UA (0x2 << 4)
+
+#define RT5631_MICBIAS2_VOLT_CTRL_MASK (0x1 << 3)
+#define RT5631_MICBIAS2_VOLT_CTRL_90P (0x0 << 3)
+#define RT5631_MICBIAS2_VOLT_CTRL_75P (0x1 << 3)
+
+#define RT5631_MICBIAS2_S_C_DET_MASK (0x1 << 2)
+#define RT5631_MICBIAS2_S_C_DET_DIS (0x0 << 2)
+#define RT5631_MICBIAS2_S_C_DET_ENA (0x1 << 2)
+
+#define RT5631_MICBIAS2_SHORT_CURR_DET_MASK (0x3)
+#define RT5631_MICBIAS2_SHORT_CURR_DET_600UA (0x0)
+#define RT5631_MICBIAS2_SHORT_CURR_DET_1500UA (0x1)
+#define RT5631_MICBIAS2_SHORT_CURR_DET_2000UA (0x2)
+
+
+/* Digital Microphone Control(0x24) */
+#define RT5631_DMIC_ENA_MASK (0x1 << 15)
+#define RT5631_DMIC_ENA_SHIFT 15
+/* DMIC_ENA: DMIC to ADC Digital filter */
+#define RT5631_DMIC_ENA (0x1 << 15)
+/* DMIC_DIS: ADC mixer to ADC Digital filter */
+#define RT5631_DMIC_DIS (0x0 << 15)
+#define RT5631_DMIC_L_CH_MUTE (0x1 << 13)
+#define RT5631_DMIC_L_CH_MUTE_SHIFT 13
+#define RT5631_DMIC_R_CH_MUTE (0x1 << 12)
+#define RT5631_DMIC_R_CH_MUTE_SHIFT 12
+#define RT5631_DMIC_L_CH_LATCH_MASK (0x1 << 9)
+#define RT5631_DMIC_L_CH_LATCH_RISING (0x1 << 9)
+#define RT5631_DMIC_L_CH_LATCH_FALLING (0x0 << 9)
+#define RT5631_DMIC_R_CH_LATCH_MASK (0x1 << 8)
+#define RT5631_DMIC_R_CH_LATCH_RISING (0x1 << 8)
+#define RT5631_DMIC_R_CH_LATCH_FALLING (0x0 << 8)
+#define RT5631_DMIC_CLK_CTRL_MASK (0x3 << 4)
+#define RT5631_DMIC_CLK_CTRL_TO_128FS (0x0 << 4)
+#define RT5631_DMIC_CLK_CTRL_TO_64FS (0x1 << 4)
+#define RT5631_DMIC_CLK_CTRL_TO_32FS (0x2 << 4)
+
+/* Microphone Input Volume(0x26) */
+#define RT5631_MONO_DIFF_INPUT_SHIFT 15
+
+/* Speaker Mixer Control(0x28) */
+#define RT5631_M_RECMIXER_L_TO_SPKMIXER_L (0x1 << 15)
+#define RT5631_M_RECMIXL_SPKMIXL_BIT 15
+#define RT5631_M_MIC1_P_TO_SPKMIXER_L (0x1 << 14)
+#define RT5631_M_MIC1P_SPKMIXL_BIT 14
+#define RT5631_M_DAC_L_TO_SPKMIXER_L (0x1 << 13)
+#define RT5631_M_DACL_SPKMIXL_BIT 13
+#define RT5631_M_OUTMIXER_L_TO_SPKMIXER_L (0x1 << 12)
+#define RT5631_M_OUTMIXL_SPKMIXL_BIT 12
+
+#define RT5631_M_RECMIXER_R_TO_SPKMIXER_R (0x1 << 7)
+#define RT5631_M_RECMIXR_SPKMIXR_BIT 7
+#define RT5631_M_MIC2_P_TO_SPKMIXER_R (0x1 << 6)
+#define RT5631_M_MIC2P_SPKMIXR_BIT 6
+#define RT5631_M_DAC_R_TO_SPKMIXER_R (0x1 << 5)
+#define RT5631_M_DACR_SPKMIXR_BIT 5
+#define RT5631_M_OUTMIXER_R_TO_SPKMIXER_R (0x1 << 4)
+#define RT5631_M_OUTMIXR_SPKMIXR_BIT 4
+
+/* Speaker/Mono Output Control(0x2A) */
+#define RT5631_M_SPKVOL_L_TO_SPOL_MIXER (0x1 << 15)
+#define RT5631_M_SPKVOLL_SPOLMIX_BIT 15
+#define RT5631_M_SPKVOL_R_TO_SPOL_MIXER (0x1 << 14)
+#define RT5631_M_SPKVOLR_SPOLMIX_BIT 14
+#define RT5631_M_SPKVOL_L_TO_SPOR_MIXER (0x1 << 13)
+#define RT5631_M_SPKVOLL_SPORMIX_BIT 13
+#define RT5631_M_SPKVOL_R_TO_SPOR_MIXER (0x1 << 12)
+#define RT5631_M_SPKVOLR_SPORMIX_BIT 12
+#define RT5631_M_OUTVOL_L_TO_MONOMIXER (0x1 << 11)
+#define RT5631_M_OUTVOLL_MONOMIX_BIT 11
+#define RT5631_M_OUTVOL_R_TO_MONOMIXER (0x1 << 10)
+#define RT5631_M_OUTVOLR_MONOMIX_BIT 10
+
+/* Speaker/Mono/HP Output Control(0x2C) */
+#define RT5631_SPK_L_MUX_SEL_MASK (0x3 << 14)
+#define RT5631_SPK_L_MUX_SEL_SPKMIXER_L (0x0 << 14)
+#define RT5631_SPK_L_MUX_SEL_MONO_IN (0x1 << 14)
+#define RT5631_SPK_L_MUX_SEL_DAC_L (0x3 << 14)
+#define RT5631_SPK_L_MUX_SEL_SHIFT 14
+
+#define RT5631_SPK_R_MUX_SEL_MASK (0x3 << 10)
+#define RT5631_SPK_R_MUX_SEL_SPKMIXER_R (0x0 << 10)
+#define RT5631_SPK_R_MUX_SEL_MONO_IN (0x1 << 10)
+#define RT5631_SPK_R_MUX_SEL_DAC_R (0x3 << 10)
+#define RT5631_SPK_R_MUX_SEL_SHIFT 10
+
+#define RT5631_MONO_MUX_SEL_MASK (0x3 << 6)
+#define RT5631_MONO_MUX_SEL_MONOMIXER (0x0 << 6)
+#define RT5631_MONO_MUX_SEL_MONO_IN (0x1 << 6)
+#define RT5631_MONO_MUX_SEL_SHIFT 6
+
+#define RT5631_HP_L_MUX_SEL_MASK (0x1 << 3)
+#define RT5631_HP_L_MUX_SEL_HPVOL_L (0x0 << 3)
+#define RT5631_HP_L_MUX_SEL_DAC_L (0x1 << 3)
+#define RT5631_HP_L_MUX_SEL_SHIFT 3
+
+#define RT5631_HP_R_MUX_SEL_MASK (0x1 << 2)
+#define RT5631_HP_R_MUX_SEL_HPVOL_R (0x0 << 2)
+#define RT5631_HP_R_MUX_SEL_DAC_R (0x1 << 2)
+#define RT5631_HP_R_MUX_SEL_SHIFT 2
+
+/* Stereo I2S Serial Data Port Control(0x34) */
+#define RT5631_SDP_MODE_SEL_MASK (0x1 << 15)
+#define RT5631_SDP_MODE_SEL_MASTER (0x0 << 15)
+#define RT5631_SDP_MODE_SEL_SLAVE (0x1 << 15)
+
+#define RT5631_SDP_ADC_CPS_SEL_MASK (0x3 << 10)
+#define RT5631_SDP_ADC_CPS_SEL_OFF (0x0 << 10)
+#define RT5631_SDP_ADC_CPS_SEL_U_LAW (0x1 << 10)
+#define RT5631_SDP_ADC_CPS_SEL_A_LAW (0x2 << 10)
+
+#define RT5631_SDP_DAC_CPS_SEL_MASK (0x3 << 8)
+#define RT5631_SDP_DAC_CPS_SEL_OFF (0x0 << 8)
+#define RT5631_SDP_DAC_CPS_SEL_U_LAW (0x1 << 8)
+#define RT5631_SDP_DAC_CPS_SEL_A_LAW (0x2 << 8)
+/* 0:Normal 1:Invert */
+#define RT5631_SDP_I2S_BCLK_POL_CTRL (0x1 << 7)
+/* 0:Normal 1:Invert */
+#define RT5631_SDP_DAC_R_INV (0x1 << 6)
+/* 0:ADC data appear at left phase of LRCK
+ * 1:ADC data appear at right phase of LRCK
+ */
+#define RT5631_SDP_ADC_DATA_L_R_SWAP (0x1 << 5)
+/* 0:DAC data appear at left phase of LRCK
+ * 1:DAC data appear at right phase of LRCK
+ */
+#define RT5631_SDP_DAC_DATA_L_R_SWAP (0x1 << 4)
+
+/* Data Length Slection */
+#define RT5631_SDP_I2S_DL_MASK (0x3 << 2)
+#define RT5631_SDP_I2S_DL_16 (0x0 << 2)
+#define RT5631_SDP_I2S_DL_20 (0x1 << 2)
+#define RT5631_SDP_I2S_DL_24 (0x2 << 2)
+#define RT5631_SDP_I2S_DL_8 (0x3 << 2)
+
+/* PCM Data Format Selection */
+#define RT5631_SDP_I2S_DF_MASK (0x3)
+#define RT5631_SDP_I2S_DF_I2S (0x0)
+#define RT5631_SDP_I2S_DF_LEFT (0x1)
+#define RT5631_SDP_I2S_DF_PCM_A (0x2)
+#define RT5631_SDP_I2S_DF_PCM_B (0x3)
+
+/* Stereo AD/DA Clock Control(0x38h) */
+#define RT5631_I2S_PRE_DIV_MASK (0x7 << 13)
+#define RT5631_I2S_PRE_DIV_1 (0x0 << 13)
+#define RT5631_I2S_PRE_DIV_2 (0x1 << 13)
+#define RT5631_I2S_PRE_DIV_4 (0x2 << 13)
+#define RT5631_I2S_PRE_DIV_8 (0x3 << 13)
+#define RT5631_I2S_PRE_DIV_16 (0x4 << 13)
+#define RT5631_I2S_PRE_DIV_32 (0x5 << 13)
+/* CLOCK RELATIVE OF BCLK AND LCRK */
+#define RT5631_I2S_LRCK_SEL_N_BCLK_MASK (0x1 << 12)
+#define RT5631_I2S_LRCK_SEL_64_BCLK (0x0 << 12) /* 64FS */
+#define RT5631_I2S_LRCK_SEL_32_BCLK (0x1 << 12) /* 32FS */
+
+#define RT5631_DAC_OSR_SEL_MASK (0x3 << 10)
+#define RT5631_DAC_OSR_SEL_128FS (0x3 << 10)
+#define RT5631_DAC_OSR_SEL_64FS (0x3 << 10)
+#define RT5631_DAC_OSR_SEL_32FS (0x3 << 10)
+#define RT5631_DAC_OSR_SEL_16FS (0x3 << 10)
+
+#define RT5631_ADC_OSR_SEL_MASK (0x3 << 8)
+#define RT5631_ADC_OSR_SEL_128FS (0x3 << 8)
+#define RT5631_ADC_OSR_SEL_64FS (0x3 << 8)
+#define RT5631_ADC_OSR_SEL_32FS (0x3 << 8)
+#define RT5631_ADC_OSR_SEL_16FS (0x3 << 8)
+
+#define RT5631_ADDA_FILTER_CLK_SEL_256FS (0 << 7) /* 256FS */
+#define RT5631_ADDA_FILTER_CLK_SEL_384FS (1 << 7) /* 384FS */
+
+/* Power managment addition 1 (0x3A) */
+#define RT5631_PWR_MAIN_I2S_EN (0x1 << 15)
+#define RT5631_PWR_MAIN_I2S_BIT 15
+#define RT5631_PWR_CLASS_D (0x1 << 12)
+#define RT5631_PWR_CLASS_D_BIT 12
+#define RT5631_PWR_ADC_L_CLK (0x1 << 11)
+#define RT5631_PWR_ADC_L_CLK_BIT 11
+#define RT5631_PWR_ADC_R_CLK (0x1 << 10)
+#define RT5631_PWR_ADC_R_CLK_BIT 10
+#define RT5631_PWR_DAC_L_CLK (0x1 << 9)
+#define RT5631_PWR_DAC_L_CLK_BIT 9
+#define RT5631_PWR_DAC_R_CLK (0x1 << 8)
+#define RT5631_PWR_DAC_R_CLK_BIT 8
+#define RT5631_PWR_DAC_REF (0x1 << 7)
+#define RT5631_PWR_DAC_REF_BIT 7
+#define RT5631_PWR_DAC_L_TO_MIXER (0x1 << 6)
+#define RT5631_PWR_DAC_L_TO_MIXER_BIT 6
+#define RT5631_PWR_DAC_R_TO_MIXER (0x1 << 5)
+#define RT5631_PWR_DAC_R_TO_MIXER_BIT 5
+
+/* Power managment addition 2 (0x3B) */
+#define RT5631_PWR_OUTMIXER_L (0x1 << 15)
+#define RT5631_PWR_OUTMIXER_L_BIT 15
+#define RT5631_PWR_OUTMIXER_R (0x1 << 14)
+#define RT5631_PWR_OUTMIXER_R_BIT 14
+#define RT5631_PWR_SPKMIXER_L (0x1 << 13)
+#define RT5631_PWR_SPKMIXER_L_BIT 13
+#define RT5631_PWR_SPKMIXER_R (0x1 << 12)
+#define RT5631_PWR_SPKMIXER_R_BIT 12
+#define RT5631_PWR_RECMIXER_L (0x1 << 11)
+#define RT5631_PWR_RECMIXER_L_BIT 11
+#define RT5631_PWR_RECMIXER_R (0x1 << 10)
+#define RT5631_PWR_RECMIXER_R_BIT 10
+#define RT5631_PWR_MIC1_BOOT_GAIN (0x1 << 5)
+#define RT5631_PWR_MIC1_BOOT_GAIN_BIT 5
+#define RT5631_PWR_MIC2_BOOT_GAIN (0x1 << 4)
+#define RT5631_PWR_MIC2_BOOT_GAIN_BIT 4
+#define RT5631_PWR_MICBIAS1_VOL (0x1 << 3)
+#define RT5631_PWR_MICBIAS1_VOL_BIT 3
+#define RT5631_PWR_MICBIAS2_VOL (0x1 << 2)
+#define RT5631_PWR_MICBIAS2_VOL_BIT 2
+#define RT5631_PWR_PLL1 (0x1 << 1)
+#define RT5631_PWR_PLL1_BIT 1
+#define RT5631_PWR_PLL2 (0x1 << 0)
+#define RT5631_PWR_PLL2_BIT 0
+
+/* Power managment addition 3(0x3C) */
+#define RT5631_PWR_VREF (0x1 << 15)
+#define RT5631_PWR_VREF_BIT 15
+#define RT5631_PWR_FAST_VREF_CTRL (0x1 << 14)
+#define RT5631_PWR_FAST_VREF_CTRL_BIT 14
+#define RT5631_PWR_MAIN_BIAS (0x1 << 13)
+#define RT5631_PWR_MAIN_BIAS_BIT 13
+#define RT5631_PWR_AXO1MIXER (0x1 << 11)
+#define RT5631_PWR_AXO1MIXER_BIT 11
+#define RT5631_PWR_AXO2MIXER (0x1 << 10)
+#define RT5631_PWR_AXO2MIXER_BIT 10
+#define RT5631_PWR_MONOMIXER (0x1 << 9)
+#define RT5631_PWR_MONOMIXER_BIT 9
+#define RT5631_PWR_MONO_DEPOP_DIS (0x1 << 8)
+#define RT5631_PWR_MONO_DEPOP_DIS_BIT 8
+#define RT5631_PWR_MONO_AMP_EN (0x1 << 7)
+#define RT5631_PWR_MONO_AMP_EN_BIT 7
+#define RT5631_PWR_CHARGE_PUMP (0x1 << 4)
+#define RT5631_PWR_CHARGE_PUMP_BIT 4
+#define RT5631_PWR_HP_L_AMP (0x1 << 3)
+#define RT5631_PWR_HP_L_AMP_BIT 3
+#define RT5631_PWR_HP_R_AMP (0x1 << 2)
+#define RT5631_PWR_HP_R_AMP_BIT 2
+#define RT5631_PWR_HP_DEPOP_DIS (0x1 << 1)
+#define RT5631_PWR_HP_DEPOP_DIS_BIT 1
+#define RT5631_PWR_HP_AMP_DRIVING (0x1 << 0)
+#define RT5631_PWR_HP_AMP_DRIVING_BIT 0
+
+/* Power managment addition 4(0x3E) */
+#define RT5631_PWR_SPK_L_VOL (0x1 << 15)
+#define RT5631_PWR_SPK_L_VOL_BIT 15
+#define RT5631_PWR_SPK_R_VOL (0x1 << 14)
+#define RT5631_PWR_SPK_R_VOL_BIT 14
+#define RT5631_PWR_LOUT_VOL (0x1 << 13)
+#define RT5631_PWR_LOUT_VOL_BIT 13
+#define RT5631_PWR_ROUT_VOL (0x1 << 12)
+#define RT5631_PWR_ROUT_VOL_BIT 12
+#define RT5631_PWR_HP_L_OUT_VOL (0x1 << 11)
+#define RT5631_PWR_HP_L_OUT_VOL_BIT 11
+#define RT5631_PWR_HP_R_OUT_VOL (0x1 << 10)
+#define RT5631_PWR_HP_R_OUT_VOL_BIT 10
+#define RT5631_PWR_AXIL_IN_VOL (0x1 << 9)
+#define RT5631_PWR_AXIL_IN_VOL_BIT 9
+#define RT5631_PWR_AXIR_IN_VOL (0x1 << 8)
+#define RT5631_PWR_AXIR_IN_VOL_BIT 8
+#define RT5631_PWR_MONO_IN_P_VOL (0x1 << 7)
+#define RT5631_PWR_MONO_IN_P_VOL_BIT 7
+#define RT5631_PWR_MONO_IN_N_VOL (0x1 << 6)
+#define RT5631_PWR_MONO_IN_N_VOL_BIT 6
+
+/* General Purpose Control Register(0x40) */
+#define RT5631_SPK_AMP_AUTO_RATIO_EN (0x1 << 15)
+
+#define RT5631_SPK_AMP_RATIO_CTRL_MASK (0x7 << 12)
+#define RT5631_SPK_AMP_RATIO_CTRL_2_34 (0x0 << 12) /* 7.40DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_99 (0x1 << 12) /* 5.99DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_68 (0x2 << 12) /* 4.50DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_56 (0x3 << 12) /* 3.86DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_44 (0x4 << 12) /* 3.16DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_27 (0x5 << 12) /* 2.10DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_09 (0x6 << 12) /* 0.80DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_1_00 (0x7 << 12) /* 0.00DB */
+#define RT5631_SPK_AMP_RATIO_CTRL_SHIFT 12
+
+#define RT5631_STEREO_DAC_HI_PASS_FILT_EN (0x1 << 11)
+#define RT5631_STEREO_ADC_HI_PASS_FILT_EN (0x1 << 10)
+/* Select ADC Wind Filter Clock type */
+#define RT5631_ADC_WIND_FILT_MASK (0x3 << 4)
+#define RT5631_ADC_WIND_FILT_8_16_32K (0x0 << 4) /*8/16/32k*/
+#define RT5631_ADC_WIND_FILT_11_22_44K (0x1 << 4) /*11/22/44k*/
+#define RT5631_ADC_WIND_FILT_12_24_48K (0x2 << 4) /*12/24/48k*/
+#define RT5631_ADC_WIND_FILT_EN (0x1 << 3)
+/* SelectADC Wind Filter Corner Frequency */
+#define RT5631_ADC_WIND_CNR_FREQ_MASK (0x7 << 0)
+#define RT5631_ADC_WIND_CNR_FREQ_82_113_122 (0x0 << 0) /* 82/113/122 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_102_141_153 (0x1 << 0) /* 102/141/153 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_131_180_156 (0x2 << 0) /* 131/180/156 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_163_225_245 (0x3 << 0) /* 163/225/245 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_204_281_306 (0x4 << 0) /* 204/281/306 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_261_360_392 (0x5 << 0) /* 261/360/392 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_327_450_490 (0x6 << 0) /* 327/450/490 Hz */
+#define RT5631_ADC_WIND_CNR_FREQ_408_563_612 (0x7 << 0) /* 408/563/612 Hz */
+
+/* Global Clock Control Register(0x42) */
+#define RT5631_SYSCLK_SOUR_SEL_MASK (0x3 << 14)
+#define RT5631_SYSCLK_SOUR_SEL_MCLK (0x0 << 14)
+#define RT5631_SYSCLK_SOUR_SEL_PLL (0x1 << 14)
+#define RT5631_SYSCLK_SOUR_SEL_PLL_TCK (0x2 << 14)
+
+#define RT5631_PLLCLK_SOUR_SEL_MASK (0x3 << 12)
+#define RT5631_PLLCLK_SOUR_SEL_MCLK (0x0 << 12)
+#define RT5631_PLLCLK_SOUR_SEL_BCLK (0x1 << 12)
+#define RT5631_PLLCLK_SOUR_SEL_VBCLK (0x2 << 12)
+
+#define RT5631_PLLCLK_PRE_DIV1 (0x0 << 11)
+#define RT5631_PLLCLK_PRE_DIV2 (0x1 << 11)
+
+/* PLL Control(0x44) */
+#define RT5631_PLL_CTRL_M_VAL(m) ((m)&0xf)
+#define RT5631_PLL_CTRL_K_VAL(k) (((k)&0x7) << 4)
+#define RT5631_PLL_CTRL_N_VAL(n) (((n)&0xff) << 8)
+
+/* Internal Status and IRQ Control2(0x4A) */
+#define RT5631_ADC_DATA_SEL_MASK (0x3 << 14)
+#define RT5631_ADC_DATA_SEL_Disable (0x0 << 14)
+#define RT5631_ADC_DATA_SEL_MIC1 (0x1 << 14)
+#define RT5631_ADC_DATA_SEL_MIC1_SHIFT 14
+#define RT5631_ADC_DATA_SEL_MIC2 (0x2 << 14)
+#define RT5631_ADC_DATA_SEL_MIC2_SHIFT 15
+#define RT5631_ADC_DATA_SEL_STO (0x3 << 14)
+#define RT5631_ADC_DATA_SEL_SHIFT 14
+
+/* GPIO Pin Configuration(0x4C) */
+#define RT5631_GPIO_PIN_FUN_SEL_MASK (0x1 << 15)
+#define RT5631_GPIO_PIN_FUN_SEL_IRQ (0x1 << 15)
+#define RT5631_GPIO_PIN_FUN_SEL_GPIO_DIMC (0x0 << 15)
+
+#define RT5631_GPIO_DMIC_FUN_SEL_MASK (0x1 << 3)
+#define RT5631_GPIO_DMIC_FUN_SEL_DIMC (0x1 << 3)
+#define RT5631_GPIO_DMIC_FUN_SEL_GPIO (0x0 << 3)
+
+#define RT5631_GPIO_PIN_CON_MASK (0x1 << 2)
+#define RT5631_GPIO_PIN_SET_INPUT (0x0 << 2)
+#define RT5631_GPIO_PIN_SET_OUTPUT (0x1 << 2)
+
+/* De-POP function Control 1(0x54) */
+#define RT5631_POW_ON_SOFT_GEN (0x1 << 15)
+#define RT5631_EN_MUTE_UNMUTE_DEPOP (0x1 << 14)
+#define RT5631_EN_DEPOP2_FOR_HP (0x1 << 7)
+/* Power Down HPAMP_L Starts Up Signal */
+#define RT5631_PD_HPAMP_L_ST_UP (0x1 << 5)
+/* Power Down HPAMP_R Starts Up Signal */
+#define RT5631_PD_HPAMP_R_ST_UP (0x1 << 4)
+/* Enable left HP mute/unmute depop */
+#define RT5631_EN_HP_L_M_UN_MUTE_DEPOP (0x1 << 1)
+/* Enable right HP mute/unmute depop */
+#define RT5631_EN_HP_R_M_UN_MUTE_DEPOP (0x1 << 0)
+
+/* De-POP Fnction Control(0x56) */
+#define RT5631_EN_ONE_BIT_DEPOP (0x1 << 15)
+#define RT5631_EN_CAP_FREE_DEPOP (0x1 << 14)
+
+/* Jack Detect Control Register(0x5A) */
+#define RT5631_JD_USE_MASK (0x3 << 14)
+#define RT5631_JD_USE_JD2 (0x3 << 14)
+#define RT5631_JD_USE_JD1 (0x2 << 14)
+#define RT5631_JD_USE_GPIO (0x1 << 14)
+#define RT5631_JD_OFF (0x0 << 14)
+/* JD trigger enable for HP */
+#define RT5631_JD_HP_EN (0x1 << 11)
+#define RT5631_JD_HP_TRI_MASK (0x1 << 10)
+#define RT5631_JD_HP_TRI_HI (0x1 << 10)
+#define RT5631_JD_HP_TRI_LO (0x1 << 10)
+/* JD trigger enable for speaker LP/LN */
+#define RT5631_JD_SPK_L_EN (0x1 << 9)
+#define RT5631_JD_SPK_L_TRI_MASK (0x1 << 8)
+#define RT5631_JD_SPK_L_TRI_HI (0x1 << 8)
+#define RT5631_JD_SPK_L_TRI_LO (0x0 << 8)
+/* JD trigger enable for speaker RP/RN */
+#define RT5631_JD_SPK_R_EN (0x1 << 7)
+#define RT5631_JD_SPK_R_TRI_MASK (0x1 << 6)
+#define RT5631_JD_SPK_R_TRI_HI (0x1 << 6)
+#define RT5631_JD_SPK_R_TRI_LO (0x0 << 6)
+/* JD trigger enable for monoout */
+#define RT5631_JD_MONO_EN (0x1 << 5)
+#define RT5631_JD_MONO_TRI_MASK (0x1 << 4)
+#define RT5631_JD_MONO_TRI_HI (0x1 << 4)
+#define RT5631_JD_MONO_TRI_LO (0x0 << 4)
+/* JD trigger enable for Lout */
+#define RT5631_JD_AUX_1_EN (0x1 << 3)
+#define RT5631_JD_AUX_1_MASK (0x1 << 2)
+#define RT5631_JD_AUX_1_TRI_HI (0x1 << 2)
+#define RT5631_JD_AUX_1_TRI_LO (0x0 << 2)
+/* JD trigger enable for Rout */
+#define RT5631_JD_AUX_2_EN (0x1 << 1)
+#define RT5631_JD_AUX_2_MASK (0x1 << 0)
+#define RT5631_JD_AUX_2_TRI_HI (0x1 << 0)
+#define RT5631_JD_AUX_2_TRI_LO (0x0 << 0)
+
+/* ALC CONTROL 1(0x64) */
+#define RT5631_ALC_ATTACK_RATE_MASK (0x1F << 8)
+#define RT5631_ALC_RECOVERY_RATE_MASK (0x1F << 0)
+
+/* ALC CONTROL 2(0x65) */
+/* select Compensation gain for Noise gate function */
+#define RT5631_ALC_COM_NOISE_GATE_MASK (0xF << 0)
+
+/* ALC CONTROL 3(0x66) */
+#define RT5631_ALC_FUN_MASK (0x3 << 14)
+#define RT5631_ALC_FUN_DIS (0x0 << 14)
+#define RT5631_ALC_ENA_DAC_PATH (0x1 << 14)
+#define RT5631_ALC_ENA_ADC_PATH (0x3 << 14)
+#define RT5631_ALC_PARA_UPDATE (0x1 << 13)
+#define RT5631_ALC_LIMIT_LEVEL_MASK (0x1F << 8)
+#define RT5631_ALC_NOISE_GATE_FUN_MASK (0x1 << 7)
+#define RT5631_ALC_NOISE_GATE_FUN_DIS (0x0 << 7)
+#define RT5631_ALC_NOISE_GATE_FUN_ENA (0x1 << 7)
+/* ALC noise gate hold data function */
+#define RT5631_ALC_NOISE_GATE_H_D_MASK (0x1 << 6)
+#define RT5631_ALC_NOISE_GATE_H_D_DIS (0x0 << 6)
+#define RT5631_ALC_NOISE_GATE_H_D_ENA (0x1 << 6)
+
+/* Psedueo Stereo & Spatial Effect Block Control(0x68) */
+#define RT5631_SPATIAL_CTRL_EN (0x1 << 15)
+#define RT5631_ALL_PASS_FILTER_EN (0x1 << 14)
+#define RT5631_PSEUDO_STEREO_EN (0x1 << 13)
+#define RT5631_STEREO_EXPENSION_EN (0x1 << 12)
+/* 3D gain parameter */
+#define RT5631_GAIN_3D_PARA_MASK (0x3 << 6)
+#define RT5631_GAIN_3D_PARA_1_00 (0x0 << 6) /* 3D gain 1.0 */
+#define RT5631_GAIN_3D_PARA_1_50 (0x1 << 6) /* 3D gain 1.5 */
+#define RT5631_GAIN_3D_PARA_2_00 (0x2 << 6) /* 3D gain 2.0 */
+/* 3D ratio parameter */
+#define RT5631_RATIO_3D_MASK (0x3 << 4)
+#define RT5631_RATIO_3D_0_0 (0x0 << 4) /* 3D ratio 0.0 */
+#define RT5631_RATIO_3D_0_66 (0x1 << 4) /* 3D ratio 0.66 */
+#define RT5631_RATIO_3D_1_0 (0x2 << 4) /* 3D ratio 1.0 */
+/* select samplerate for all pass filter */
+#define RT5631_APF_FUN_SLE_MASK (0x3 << 0)
+#define RT5631_APF_FUN_SEL_48K (0x3 << 0)
+#define RT5631_APF_FUN_SEL_44_1K (0x2 << 0)
+#define RT5631_APF_FUN_SEL_32K (0x1 << 0)
+#define RT5631_APF_FUN_DIS (0x0 << 0)
+
+/* EQ CONTROL 1(0x6E) */
+#define RT5631_HW_EQ_PATH_SEL_MASK (0x1 << 15)
+#define RT5631_HW_EQ_PATH_SEL_DAC (0x0 << 15)
+#define RT5631_HW_EQ_PATH_SEL_ADC (0x1 << 15)
+#define RT5631_HW_EQ_UPDATE_CTRL (0x1 << 14)
+
+#define RT5631_EN_HW_EQ_HPF2 (0x1 << 5)
+#define RT5631_EN_HW_EQ_HPF1 (0x1 << 4)
+#define RT5631_EN_HW_EQ_BP3 (0x1 << 3)
+#define RT5631_EN_HW_EQ_BP2 (0x1 << 2)
+#define RT5631_EN_HW_EQ_BP1 (0x1 << 1)
+#define RT5631_EN_HW_EQ_LPF (0x1 << 0)
+
+
+#endif /* __RTCODEC5631_H__ */
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 7e4066e..d15695d 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -20,6 +20,7 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/tlv.h>
#include <sound/pcm.h>
@@ -130,16 +131,13 @@
case SND_SOC_DAPM_POST_PMU:
/* change mic bias resistor to 4Kohm */
snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
- SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k);
+ SGTL5000_BIAS_R_MASK,
+ SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT);
break;
case SND_SOC_DAPM_PRE_PMD:
- /*
- * SGTL5000_BIAS_R_8k as mask to clean the two bits
- * of mic bias and output impedance
- */
snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
- SGTL5000_BIAS_R_8k, 0);
+ SGTL5000_BIAS_R_MASK, 0);
break;
}
return 0;
@@ -725,7 +723,9 @@
return -EINVAL;
}
- snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, i2s_ctl, i2s_ctl);
+ snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL,
+ SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK,
+ i2s_ctl);
return 0;
}
@@ -756,7 +756,7 @@
/* set voltage to register */
snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
- (0x1 << 4) - 1, reg);
+ SGTL5000_LINREG_VDDD_MASK, reg);
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_LINEREG_D_POWERUP,
@@ -782,7 +782,7 @@
/* clear voltage info */
snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
- (0x1 << 4) - 1, 0);
+ SGTL5000_LINREG_VDDD_MASK, 0);
ldo->enabled = 0;
@@ -808,6 +808,7 @@
int voltage)
{
struct ldo_regulator *ldo;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
@@ -842,6 +843,7 @@
return ret;
}
+ sgtl5000->ldo = ldo;
return 0;
}
@@ -1115,7 +1117,7 @@
/* set voltage to register */
snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
- (0x1 << 4) - 1, 0x8);
+ SGTL5000_LINREG_VDDD_MASK, 0x8);
/*
* if vddd linear reg has been enabled,
@@ -1146,8 +1148,7 @@
vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
- vag << SGTL5000_ANA_GND_SHIFT,
- vag << SGTL5000_ANA_GND_SHIFT);
+ SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
vag = vddio / 2;
@@ -1161,9 +1162,8 @@
SGTL5000_LINE_OUT_GND_STP;
snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
- vag << SGTL5000_LINE_OUT_GND_SHIFT |
- SGTL5000_LINE_OUT_CURRENT_360u <<
- SGTL5000_LINE_OUT_CURRENT_SHIFT,
+ SGTL5000_LINE_OUT_CURRENT_MASK |
+ SGTL5000_LINE_OUT_GND_MASK,
vag << SGTL5000_LINE_OUT_GND_SHIFT |
SGTL5000_LINE_OUT_CURRENT_360u <<
SGTL5000_LINE_OUT_CURRENT_SHIFT);
@@ -1436,10 +1436,17 @@
MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
+static const struct of_device_id sgtl5000_dt_ids[] = {
+ { .compatible = "fsl,sgtl5000", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids);
+
static struct i2c_driver sgtl5000_i2c_driver = {
.driver = {
.name = "sgtl5000",
.owner = THIS_MODULE,
+ .of_match_table = sgtl5000_dt_ids,
},
.probe = sgtl5000_i2c_probe,
.remove = __devexit_p(sgtl5000_i2c_remove),
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index eec3ab3..8a9f435 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -280,7 +280,7 @@
/*
* SGTL5000_CHIP_MIC_CTRL
*/
-#define SGTL5000_BIAS_R_MASK 0x0200
+#define SGTL5000_BIAS_R_MASK 0x0300
#define SGTL5000_BIAS_R_SHIFT 8
#define SGTL5000_BIAS_R_WIDTH 2
#define SGTL5000_BIAS_R_off 0x0
diff --git a/sound/soc/codecs/sn95031.c b/sound/soc/codecs/sn95031.c
index 84ffdeb..f681e41 100644
--- a/sound/soc/codecs/sn95031.c
+++ b/sound/soc/codecs/sn95031.c
@@ -79,7 +79,7 @@
*/
static int find_free_channel(struct snd_soc_codec *sn95031_codec)
{
- int ret = 0, i, value;
+ int i, value;
/* check whether ADC is enabled */
value = snd_soc_read(sn95031_codec, SN95031_ADC1CNTL1);
@@ -91,12 +91,10 @@
for (i = 0; i < SN95031_ADC_CHANLS_MAX; i++) {
value = snd_soc_read(sn95031_codec,
SN95031_ADC_CHNL_START_ADDR + i);
- if (value & SN95031_STOPBIT_MASK) {
- ret = i;
+ if (value & SN95031_STOPBIT_MASK)
break;
- }
}
- return (ret > SN95031_ADC_LOOP_MAX) ? (-EINVAL) : ret;
+ return (i == SN95031_ADC_CHANLS_MAX) ? (-EINVAL) : i;
}
/* Initialize the ADC for reading micbias values. Can sleep. */
@@ -104,7 +102,7 @@
{
int base_addr, chnl_addr;
int value;
- static int channel_index;
+ int channel_index;
/* Index of the first channel in which the stop bit is set */
channel_index = find_free_channel(sn95031_codec);
@@ -163,7 +161,6 @@
pr_debug("mic bias = %dmV\n", mic_bias);
return mic_bias;
}
-EXPORT_SYMBOL_GPL(sn95031_get_mic_bias);
/*end - adc helper functions */
static inline unsigned int sn95031_read(struct snd_soc_codec *codec,
@@ -660,7 +657,7 @@
return 0;
}
-int sn95031_pcm_hw_params(struct snd_pcm_substream *substream,
+static int sn95031_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
{
unsigned int format, rate;
@@ -718,7 +715,7 @@
.hw_params = sn95031_pcm_hw_params,
};
-struct snd_soc_dai_driver sn95031_dais[] = {
+static struct snd_soc_dai_driver sn95031_dais[] = {
{
.name = "SN95031 Headset",
.playback = {
@@ -829,7 +826,6 @@
{
pr_debug("codec_probe called\n");
- codec->dapm.bias_level = SND_SOC_BIAS_OFF;
codec->dapm.idle_bias_off = 1;
/* PCM interface config
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 9801cd7..3cb3271 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -59,6 +59,7 @@
struct snd_pcm_substream *slave_substream;
enum ssm2602_type type;
+ unsigned int clk_out_pwr;
};
/*
@@ -294,7 +295,6 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec);
- struct i2c_client *i2c = codec->control_data;
struct snd_pcm_runtime *master_runtime;
/* The DAI has shared clocks so if we already have a playback or
@@ -303,7 +303,7 @@
*/
if (ssm2602->master_substream) {
master_runtime = ssm2602->master_substream->runtime;
- dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
+ dev_dbg(codec->dev, "Constraining to %d bits at %dHz\n",
master_runtime->sample_bits,
master_runtime->rate);
@@ -343,12 +343,14 @@
static int ssm2602_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = snd_soc_read(codec, SSM2602_APDIGI) & ~APDIGI_ENABLE_DAC_MUTE;
+
if (mute)
- snd_soc_write(codec, SSM2602_APDIGI,
- mute_reg | APDIGI_ENABLE_DAC_MUTE);
+ snd_soc_update_bits(codec, SSM2602_APDIGI,
+ APDIGI_ENABLE_DAC_MUTE,
+ APDIGI_ENABLE_DAC_MUTE);
else
- snd_soc_write(codec, SSM2602_APDIGI, mute_reg);
+ snd_soc_update_bits(codec, SSM2602_APDIGI,
+ APDIGI_ENABLE_DAC_MUTE, 0);
return 0;
}
@@ -357,16 +359,46 @@
{
struct snd_soc_codec *codec = codec_dai->codec;
struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec);
- switch (freq) {
- case 11289600:
- case 12000000:
- case 12288000:
- case 16934400:
- case 18432000:
- ssm2602->sysclk = freq;
- return 0;
+
+ if (dir == SND_SOC_CLOCK_IN) {
+ if (clk_id != SSM2602_SYSCLK)
+ return -EINVAL;
+
+ switch (freq) {
+ case 11289600:
+ case 12000000:
+ case 12288000:
+ case 16934400:
+ case 18432000:
+ ssm2602->sysclk = freq;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ unsigned int mask;
+
+ switch (clk_id) {
+ case SSM2602_CLK_CLKOUT:
+ mask = PWR_CLK_OUT_PDN;
+ break;
+ case SSM2602_CLK_XTO:
+ mask = PWR_OSC_PDN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (freq == 0)
+ ssm2602->clk_out_pwr |= mask;
+ else
+ ssm2602->clk_out_pwr &= ~mask;
+
+ snd_soc_update_bits(codec, SSM2602_PWR,
+ PWR_CLK_OUT_PDN | PWR_OSC_PDN, ssm2602->clk_out_pwr);
}
- return -EINVAL;
+
+ return 0;
}
static int ssm2602_set_dai_fmt(struct snd_soc_dai *codec_dai,
@@ -431,23 +463,27 @@
static int ssm2602_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg = snd_soc_read(codec, SSM2602_PWR);
- reg &= ~(PWR_POWER_OFF | PWR_OSC_PDN);
+ struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec);
switch (level) {
case SND_SOC_BIAS_ON:
- /* vref/mid, osc on, dac unmute */
- snd_soc_write(codec, SSM2602_PWR, reg);
+ /* vref/mid on, osc and clkout on if enabled */
+ snd_soc_update_bits(codec, SSM2602_PWR,
+ PWR_POWER_OFF | PWR_CLK_OUT_PDN | PWR_OSC_PDN,
+ ssm2602->clk_out_pwr);
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
/* everything off except vref/vmid, */
- snd_soc_write(codec, SSM2602_PWR, reg | PWR_CLK_OUT_PDN);
+ snd_soc_update_bits(codec, SSM2602_PWR,
+ PWR_POWER_OFF | PWR_CLK_OUT_PDN | PWR_OSC_PDN,
+ PWR_CLK_OUT_PDN | PWR_OSC_PDN);
break;
case SND_SOC_BIAS_OFF:
- /* everything off, dac mute, inactive */
- snd_soc_write(codec, SSM2602_PWR, 0xffff);
+ /* everything off */
+ snd_soc_update_bits(codec, SSM2602_PWR,
+ PWR_POWER_OFF, PWR_POWER_OFF);
break;
}
@@ -506,12 +542,12 @@
static int ssm2602_probe(struct snd_soc_codec *codec)
{
struct snd_soc_dapm_context *dapm = &codec->dapm;
- int ret, reg;
+ int ret;
- reg = snd_soc_read(codec, SSM2602_LOUT1V);
- snd_soc_write(codec, SSM2602_LOUT1V, reg | LOUT1V_LRHP_BOTH);
- reg = snd_soc_read(codec, SSM2602_ROUT1V);
- snd_soc_write(codec, SSM2602_ROUT1V, reg | ROUT1V_RLHP_BOTH);
+ snd_soc_update_bits(codec, SSM2602_LOUT1V,
+ LOUT1V_LRHP_BOTH, LOUT1V_LRHP_BOTH);
+ snd_soc_update_bits(codec, SSM2602_ROUT1V,
+ ROUT1V_RLHP_BOTH, ROUT1V_RLHP_BOTH);
ret = snd_soc_add_controls(codec, ssm2602_snd_controls,
ARRAY_SIZE(ssm2602_snd_controls));
@@ -544,7 +580,7 @@
static int ssm260x_probe(struct snd_soc_codec *codec)
{
struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec);
- int ret, reg;
+ int ret;
pr_info("ssm2602 Audio Codec %s", SSM2602_VERSION);
@@ -561,10 +597,10 @@
}
/* set the update bits */
- reg = snd_soc_read(codec, SSM2602_LINVOL);
- snd_soc_write(codec, SSM2602_LINVOL, reg | LINVOL_LRIN_BOTH);
- reg = snd_soc_read(codec, SSM2602_RINVOL);
- snd_soc_write(codec, SSM2602_RINVOL, reg | RINVOL_RLIN_BOTH);
+ snd_soc_update_bits(codec, SSM2602_LINVOL,
+ LINVOL_LRIN_BOTH, LINVOL_LRIN_BOTH);
+ snd_soc_update_bits(codec, SSM2602_RINVOL,
+ RINVOL_RLIN_BOTH, RINVOL_RLIN_BOTH);
/*select Line in as default input*/
snd_soc_write(codec, SSM2602_APANA, APANA_SELECT_DAC |
APANA_ENABLE_MIC_BOOST);
@@ -578,7 +614,12 @@
break;
}
- return ret;
+ if (ret)
+ return ret;
+
+ ssm2602_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
}
/* remove everything here */
diff --git a/sound/soc/codecs/ssm2602.h b/sound/soc/codecs/ssm2602.h
index b98c6916..fbd07d7 100644
--- a/sound/soc/codecs/ssm2602.h
+++ b/sound/soc/codecs/ssm2602.h
@@ -116,6 +116,10 @@
#define SSM2602_CACHEREGNUM 10
-#define SSM2602_SYSCLK 0
+enum ssm2602_clk {
+ SSM2602_SYSCLK,
+ SSM2602_CLK_CLKOUT,
+ SSM2602_CLK_XTO
+};
#endif
diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c
index fbd7eb9..bb82408 100644
--- a/sound/soc/codecs/sta32x.c
+++ b/sound/soc/codecs/sta32x.c
@@ -524,13 +524,17 @@
rate = params_rate(params);
pr_debug("rate: %u\n", rate);
for (i = 0; i < ARRAY_SIZE(interpolation_ratios); i++)
- if (interpolation_ratios[i].fs == rate)
+ if (interpolation_ratios[i].fs == rate) {
ir = interpolation_ratios[i].ir;
+ break;
+ }
if (ir < 0)
return -EINVAL;
for (i = 0; mclk_ratios[ir][i].ratio; i++)
- if (mclk_ratios[ir][i].ratio * rate == sta32x->mclk)
+ if (mclk_ratios[ir][i].ratio * rate == sta32x->mclk) {
mcs = mclk_ratios[ir][i].mcs;
+ break;
+ }
if (mcs < 0)
return -EINVAL;
@@ -752,25 +756,19 @@
return ret;
}
- /* read reg reset values into cache */
- for (i = 0; i < STA32X_REGISTER_COUNT; i++)
- snd_soc_cache_write(codec, i, sta32x_regs[i]);
-
- /* preserve reset values of reserved register bits */
- snd_soc_cache_write(codec, STA32X_CONFC,
- codec->hw_read(codec, STA32X_CONFC));
- snd_soc_cache_write(codec, STA32X_CONFE,
- codec->hw_read(codec, STA32X_CONFE));
- snd_soc_cache_write(codec, STA32X_CONFF,
- codec->hw_read(codec, STA32X_CONFF));
- snd_soc_cache_write(codec, STA32X_MMUTE,
- codec->hw_read(codec, STA32X_MMUTE));
- snd_soc_cache_write(codec, STA32X_AUTO1,
- codec->hw_read(codec, STA32X_AUTO1));
- snd_soc_cache_write(codec, STA32X_AUTO3,
- codec->hw_read(codec, STA32X_AUTO3));
- snd_soc_cache_write(codec, STA32X_C3CFG,
- codec->hw_read(codec, STA32X_C3CFG));
+ /* Chip documentation explicitly requires that the reset values
+ * of reserved register bits are left untouched.
+ * Write the register default value to cache for reserved registers,
+ * so the write to the these registers are suppressed by the cache
+ * restore code when it skips writes of default registers.
+ */
+ snd_soc_cache_write(codec, STA32X_CONFC, 0xc2);
+ snd_soc_cache_write(codec, STA32X_CONFE, 0xc2);
+ snd_soc_cache_write(codec, STA32X_CONFF, 0x5c);
+ snd_soc_cache_write(codec, STA32X_MMUTE, 0x10);
+ snd_soc_cache_write(codec, STA32X_AUTO1, 0x60);
+ snd_soc_cache_write(codec, STA32X_AUTO3, 0x00);
+ snd_soc_cache_write(codec, STA32X_C3CFG, 0x40);
/* FIXME enable thermal warning adjustment and recovery */
snd_soc_update_bits(codec, STA32X_CONFA,
@@ -808,6 +806,7 @@
{
struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec);
+ sta32x_set_bias_level(codec, SND_SOC_BIAS_OFF);
regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
regulator_bulk_free(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
@@ -832,6 +831,7 @@
.resume = sta32x_resume,
.reg_cache_size = STA32X_REGISTER_COUNT,
.reg_word_size = sizeof(u8),
+ .reg_cache_default = sta32x_regs,
.volatile_register = sta32x_reg_is_volatile,
.set_bias_level = sta32x_set_bias_level,
.controls = sta32x_snd_controls,
@@ -867,18 +867,8 @@
static __devexit int sta32x_i2c_remove(struct i2c_client *client)
{
struct sta32x_priv *sta32x = i2c_get_clientdata(client);
- struct snd_soc_codec *codec = sta32x->codec;
- if (codec)
- sta32x_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
- regulator_bulk_free(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
-
- if (codec) {
- snd_soc_unregister_codec(&client->dev);
- snd_soc_codec_set_drvdata(codec, NULL);
- }
-
+ snd_soc_unregister_codec(&client->dev);
kfree(sta32x);
return 0;
}
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index 33bb52f..ab27dbc 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -47,63 +47,6 @@
0x0000, 0x0000, 0x0000, 0x0000, /* 12 */
};
-/*
- * read tlv320aic23 register cache
- */
-static inline unsigned int tlv320aic23_read_reg_cache(struct snd_soc_codec
- *codec, unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= ARRAY_SIZE(tlv320aic23_reg))
- return -1;
- return cache[reg];
-}
-
-/*
- * write tlv320aic23 register cache
- */
-static inline void tlv320aic23_write_reg_cache(struct snd_soc_codec *codec,
- u8 reg, u16 value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= ARRAY_SIZE(tlv320aic23_reg))
- return;
- cache[reg] = value;
-}
-
-/*
- * write to the tlv320aic23 register space
- */
-static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
-
- u8 data[2];
-
- /* TLV320AIC23 has 7 bit address and 9 bits of data
- * so we need to switch one data bit into reg and rest
- * of data into val
- */
-
- if (reg > 9 && reg != 15) {
- printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg);
- return -1;
- }
-
- data[0] = (reg << 1) | (value >> 8 & 0x01);
- data[1] = value & 0xff;
-
- tlv320aic23_write_reg_cache(codec, reg, value);
-
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
-
- printk(KERN_ERR "%s cannot write %03x to register R%u\n", __func__,
- value, reg);
-
- return -EIO;
-}
-
static const char *rec_src_text[] = { "Line", "Mic" };
static const char *deemph_text[] = {"None", "32Khz", "44.1Khz", "48Khz"};
@@ -139,8 +82,8 @@
*/
val = (val >= 4) ? 4 : (3 - val);
- reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_ANLG) & (~0x1C0);
- tlv320aic23_write(codec, TLV320AIC23_ANLG, reg | (val << 6));
+ reg = snd_soc_read(codec, TLV320AIC23_ANLG) & (~0x1C0);
+ snd_soc_write(codec, TLV320AIC23_ANLG, reg | (val << 6));
return 0;
}
@@ -151,7 +94,7 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
u16 val;
- val = tlv320aic23_read_reg_cache(codec, TLV320AIC23_ANLG) & (0x1C0);
+ val = snd_soc_read(codec, TLV320AIC23_ANLG) & (0x1C0);
val = val >> 6;
val = (val >= 4) ? 4 : (3 - val);
ucontrol->value.integer.value[0] = val;
@@ -159,15 +102,6 @@
}
-#define SOC_TLV320AIC23_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
- SNDRV_CTL_ELEM_ACCESS_READWRITE,\
- .tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw, .get = snd_soc_tlv320aic23_get_volsw,\
- .put = snd_soc_tlv320aic23_put_volsw, \
- .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) }
-
static const struct snd_kcontrol_new tlv320aic23_snd_controls[] = {
SOC_DOUBLE_R_TLV("Digital Playback Volume", TLV320AIC23_LCHNVOL,
TLV320AIC23_RCHNVOL, 0, 127, 0, out_gain_tlv),
@@ -178,8 +112,9 @@
TLV320AIC23_RINVOL, 0, 31, 0, input_gain_tlv),
SOC_SINGLE("Mic Input Switch", TLV320AIC23_ANLG, 1, 1, 1),
SOC_SINGLE("Mic Booster Switch", TLV320AIC23_ANLG, 0, 1, 0),
- SOC_TLV320AIC23_SINGLE_TLV("Sidetone Volume", TLV320AIC23_ANLG,
- 6, 4, 0, sidetone_vol_tlv),
+ SOC_SINGLE_EXT_TLV("Sidetone Volume", TLV320AIC23_ANLG, 6, 4, 0,
+ snd_soc_tlv320aic23_get_volsw,
+ snd_soc_tlv320aic23_put_volsw, sidetone_vol_tlv),
SOC_ENUM("Playback De-emphasis", tlv320aic23_deemph),
};
@@ -240,7 +175,6 @@
/* AIC23 driver data */
struct aic23 {
enum snd_soc_control_type control_type;
- void *control_data;
int mclk;
int requested_adc;
int requested_dac;
@@ -352,7 +286,7 @@
static void get_current_sample_rates(struct snd_soc_codec *codec, int mclk,
u32 *sample_rate_adc, u32 *sample_rate_dac)
{
- int src = tlv320aic23_read_reg_cache(codec, TLV320AIC23_SRATE);
+ int src = snd_soc_read(codec, TLV320AIC23_SRATE);
int sr = (src >> 2) & 0x0f;
int val = (mclk / bosr_usb_divisor_table[src & 3]);
int adc = (val * sr_adc_mult_table[sr]) / SR_MULT;
@@ -376,7 +310,7 @@
__func__, sample_rate_adc, sample_rate_dac);
return -EINVAL;
}
- tlv320aic23_write(codec, TLV320AIC23_SRATE, data);
+ snd_soc_write(codec, TLV320AIC23_SRATE, data);
#ifdef DEBUG
{
u32 adc, dac;
@@ -415,9 +349,8 @@
if (ret < 0)
return ret;
- iface_reg =
- tlv320aic23_read_reg_cache(codec,
- TLV320AIC23_DIGT_FMT) & ~(0x03 << 2);
+ iface_reg = snd_soc_read(codec, TLV320AIC23_DIGT_FMT) & ~(0x03 << 2);
+
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
@@ -431,7 +364,7 @@
iface_reg |= (0x03 << 2);
break;
}
- tlv320aic23_write(codec, TLV320AIC23_DIGT_FMT, iface_reg);
+ snd_soc_write(codec, TLV320AIC23_DIGT_FMT, iface_reg);
return 0;
}
@@ -443,7 +376,7 @@
struct snd_soc_codec *codec = rtd->codec;
/* set active */
- tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0001);
+ snd_soc_write(codec, TLV320AIC23_ACTIVE, 0x0001);
return 0;
}
@@ -458,7 +391,7 @@
/* deactivate */
if (!codec->active) {
udelay(50);
- tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0);
+ snd_soc_write(codec, TLV320AIC23_ACTIVE, 0x0);
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
aic23->requested_dac = 0;
@@ -471,14 +404,14 @@
struct snd_soc_codec *codec = dai->codec;
u16 reg;
- reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_DIGT);
+ reg = snd_soc_read(codec, TLV320AIC23_DIGT);
if (mute)
reg |= TLV320AIC23_DACM_MUTE;
else
reg &= ~TLV320AIC23_DACM_MUTE;
- tlv320aic23_write(codec, TLV320AIC23_DIGT, reg);
+ snd_soc_write(codec, TLV320AIC23_DIGT, reg);
return 0;
}
@@ -489,8 +422,7 @@
struct snd_soc_codec *codec = codec_dai->codec;
u16 iface_reg;
- iface_reg =
- tlv320aic23_read_reg_cache(codec, TLV320AIC23_DIGT_FMT) & (~0x03);
+ iface_reg = snd_soc_read(codec, TLV320AIC23_DIGT_FMT) & (~0x03);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -524,7 +456,7 @@
}
- tlv320aic23_write(codec, TLV320AIC23_DIGT_FMT, iface_reg);
+ snd_soc_write(codec, TLV320AIC23_DIGT_FMT, iface_reg);
return 0;
}
@@ -540,26 +472,26 @@
static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_PWR) & 0xff7f;
+ u16 reg = snd_soc_read(codec, TLV320AIC23_PWR) & 0xff7f;
switch (level) {
case SND_SOC_BIAS_ON:
/* vref/mid, osc on, dac unmute */
reg &= ~(TLV320AIC23_DEVICE_PWR_OFF | TLV320AIC23_OSC_OFF | \
TLV320AIC23_DAC_OFF);
- tlv320aic23_write(codec, TLV320AIC23_PWR, reg);
+ snd_soc_write(codec, TLV320AIC23_PWR, reg);
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
/* everything off except vref/vmid, */
- tlv320aic23_write(codec, TLV320AIC23_PWR, reg | \
- TLV320AIC23_CLK_OFF);
+ snd_soc_write(codec, TLV320AIC23_PWR,
+ reg | TLV320AIC23_CLK_OFF);
break;
case SND_SOC_BIAS_OFF:
/* everything off, dac mute, inactive */
- tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0);
- tlv320aic23_write(codec, TLV320AIC23_PWR, 0xffff);
+ snd_soc_write(codec, TLV320AIC23_ACTIVE, 0x0);
+ snd_soc_write(codec, TLV320AIC23_PWR, 0xffff);
break;
}
codec->dapm.bias_level = level;
@@ -606,13 +538,7 @@
static int tlv320aic23_resume(struct snd_soc_codec *codec)
{
- u16 reg;
-
- /* Sync reg_cache with the hardware */
- for (reg = 0; reg <= TLV320AIC23_ACTIVE; reg++) {
- u16 val = tlv320aic23_read_reg_cache(codec, reg);
- tlv320aic23_write(codec, reg, val);
- }
+ snd_soc_cache_sync(codec);
tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
@@ -621,46 +547,52 @@
static int tlv320aic23_probe(struct snd_soc_codec *codec)
{
struct aic23 *aic23 = snd_soc_codec_get_drvdata(codec);
- int reg;
+ int ret;
printk(KERN_INFO "AIC23 Audio Codec %s\n", AIC23_VERSION);
- codec->control_data = aic23->control_data;
- codec->hw_write = (hw_write_t)i2c_master_send;
- codec->hw_read = NULL;
+
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, aic23->control_type);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
/* Reset codec */
- tlv320aic23_write(codec, TLV320AIC23_RESET, 0);
+ snd_soc_write(codec, TLV320AIC23_RESET, 0);
+
+ /* Write the register default value to cache for reserved registers,
+ * so the write to the these registers are suppressed by the cache
+ * restore code when it skips writes of default registers.
+ */
+ snd_soc_cache_write(codec, 0x0A, 0);
+ snd_soc_cache_write(codec, 0x0B, 0);
+ snd_soc_cache_write(codec, 0x0C, 0);
+ snd_soc_cache_write(codec, 0x0D, 0);
+ snd_soc_cache_write(codec, 0x0E, 0);
/* power on device */
tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- tlv320aic23_write(codec, TLV320AIC23_DIGT, TLV320AIC23_DEEMP_44K);
+ snd_soc_write(codec, TLV320AIC23_DIGT, TLV320AIC23_DEEMP_44K);
/* Unmute input */
- reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_LINVOL);
- tlv320aic23_write(codec, TLV320AIC23_LINVOL,
- (reg & (~TLV320AIC23_LIM_MUTED)) |
- (TLV320AIC23_LRS_ENABLED));
+ snd_soc_update_bits(codec, TLV320AIC23_LINVOL,
+ TLV320AIC23_LIM_MUTED, TLV320AIC23_LRS_ENABLED);
- reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_RINVOL);
- tlv320aic23_write(codec, TLV320AIC23_RINVOL,
- (reg & (~TLV320AIC23_LIM_MUTED)) |
- TLV320AIC23_LRS_ENABLED);
+ snd_soc_update_bits(codec, TLV320AIC23_RINVOL,
+ TLV320AIC23_LIM_MUTED, TLV320AIC23_LRS_ENABLED);
- reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_ANLG);
- tlv320aic23_write(codec, TLV320AIC23_ANLG,
- (reg) & (~TLV320AIC23_BYPASS_ON) &
- (~TLV320AIC23_MICM_MUTED));
+ snd_soc_update_bits(codec, TLV320AIC23_ANLG,
+ TLV320AIC23_BYPASS_ON | TLV320AIC23_MICM_MUTED,
+ 0);
/* Default output volume */
- tlv320aic23_write(codec, TLV320AIC23_LCHNVOL,
- TLV320AIC23_DEFAULT_OUT_VOL &
- TLV320AIC23_OUT_VOL_MASK);
- tlv320aic23_write(codec, TLV320AIC23_RCHNVOL,
- TLV320AIC23_DEFAULT_OUT_VOL &
- TLV320AIC23_OUT_VOL_MASK);
+ snd_soc_write(codec, TLV320AIC23_LCHNVOL,
+ TLV320AIC23_DEFAULT_OUT_VOL & TLV320AIC23_OUT_VOL_MASK);
+ snd_soc_write(codec, TLV320AIC23_RCHNVOL,
+ TLV320AIC23_DEFAULT_OUT_VOL & TLV320AIC23_OUT_VOL_MASK);
- tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x1);
+ snd_soc_write(codec, TLV320AIC23_ACTIVE, 0x1);
snd_soc_add_controls(codec, tlv320aic23_snd_controls,
ARRAY_SIZE(tlv320aic23_snd_controls));
@@ -682,8 +614,6 @@
.remove = tlv320aic23_remove,
.suspend = tlv320aic23_suspend,
.resume = tlv320aic23_resume,
- .read = tlv320aic23_read_reg_cache,
- .write = tlv320aic23_write,
.set_bias_level = tlv320aic23_set_bias_level,
.dapm_widgets = tlv320aic23_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets),
@@ -710,7 +640,6 @@
return -ENOMEM;
i2c_set_clientdata(i2c, aic23);
- aic23->control_data = i2c;
aic23->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index e93b9d1..b21c610 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -528,40 +528,33 @@
enum snd_soc_bias_level level)
{
struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec);
- u8 value;
switch (level) {
case SND_SOC_BIAS_ON:
if (aic32x4->master) {
/* Switch on PLL */
- value = snd_soc_read(codec, AIC32X4_PLLPR);
- snd_soc_write(codec, AIC32X4_PLLPR,
- (value | AIC32X4_PLLEN));
+ snd_soc_update_bits(codec, AIC32X4_PLLPR,
+ AIC32X4_PLLEN, AIC32X4_PLLEN);
/* Switch on NDAC Divider */
- value = snd_soc_read(codec, AIC32X4_NDAC);
- snd_soc_write(codec, AIC32X4_NDAC,
- value | AIC32X4_NDACEN);
+ snd_soc_update_bits(codec, AIC32X4_NDAC,
+ AIC32X4_NDACEN, AIC32X4_NDACEN);
/* Switch on MDAC Divider */
- value = snd_soc_read(codec, AIC32X4_MDAC);
- snd_soc_write(codec, AIC32X4_MDAC,
- value | AIC32X4_MDACEN);
+ snd_soc_update_bits(codec, AIC32X4_MDAC,
+ AIC32X4_MDACEN, AIC32X4_MDACEN);
/* Switch on NADC Divider */
- value = snd_soc_read(codec, AIC32X4_NADC);
- snd_soc_write(codec, AIC32X4_NADC,
- value | AIC32X4_MDACEN);
+ snd_soc_update_bits(codec, AIC32X4_NADC,
+ AIC32X4_NADCEN, AIC32X4_NADCEN);
/* Switch on MADC Divider */
- value = snd_soc_read(codec, AIC32X4_MADC);
- snd_soc_write(codec, AIC32X4_MADC,
- value | AIC32X4_MDACEN);
+ snd_soc_update_bits(codec, AIC32X4_MADC,
+ AIC32X4_MADCEN, AIC32X4_MADCEN);
/* Switch on BCLK_N Divider */
- value = snd_soc_read(codec, AIC32X4_BCLKN);
- snd_soc_write(codec, AIC32X4_BCLKN,
- value | AIC32X4_BCLKEN);
+ snd_soc_update_bits(codec, AIC32X4_BCLKN,
+ AIC32X4_BCLKEN, AIC32X4_BCLKEN);
}
break;
case SND_SOC_BIAS_PREPARE:
@@ -569,34 +562,28 @@
case SND_SOC_BIAS_STANDBY:
if (aic32x4->master) {
/* Switch off PLL */
- value = snd_soc_read(codec, AIC32X4_PLLPR);
- snd_soc_write(codec, AIC32X4_PLLPR,
- (value & ~AIC32X4_PLLEN));
+ snd_soc_update_bits(codec, AIC32X4_PLLPR,
+ AIC32X4_PLLEN, 0);
/* Switch off NDAC Divider */
- value = snd_soc_read(codec, AIC32X4_NDAC);
- snd_soc_write(codec, AIC32X4_NDAC,
- value & ~AIC32X4_NDACEN);
+ snd_soc_update_bits(codec, AIC32X4_NDAC,
+ AIC32X4_NDACEN, 0);
/* Switch off MDAC Divider */
- value = snd_soc_read(codec, AIC32X4_MDAC);
- snd_soc_write(codec, AIC32X4_MDAC,
- value & ~AIC32X4_MDACEN);
+ snd_soc_update_bits(codec, AIC32X4_MDAC,
+ AIC32X4_MDACEN, 0);
/* Switch off NADC Divider */
- value = snd_soc_read(codec, AIC32X4_NADC);
- snd_soc_write(codec, AIC32X4_NADC,
- value & ~AIC32X4_NDACEN);
+ snd_soc_update_bits(codec, AIC32X4_NADC,
+ AIC32X4_NADCEN, 0);
/* Switch off MADC Divider */
- value = snd_soc_read(codec, AIC32X4_MADC);
- snd_soc_write(codec, AIC32X4_MADC,
- value & ~AIC32X4_MDACEN);
- value = snd_soc_read(codec, AIC32X4_BCLKN);
+ snd_soc_update_bits(codec, AIC32X4_MADC,
+ AIC32X4_MADCEN, 0);
/* Switch off BCLK_N Divider */
- snd_soc_write(codec, AIC32X4_BCLKN,
- value & ~AIC32X4_BCLKEN);
+ snd_soc_update_bits(codec, AIC32X4_BCLKN,
+ AIC32X4_BCLKEN, 0);
}
break;
case SND_SOC_BIAS_OFF:
@@ -685,10 +672,10 @@
}
/* Mic PGA routing */
- if (aic32x4->micpga_routing | AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K) {
+ if (aic32x4->micpga_routing & AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K) {
snd_soc_write(codec, AIC32X4_LMICPGANIN, AIC32X4_LMICPGANIN_IN2R_10K);
}
- if (aic32x4->micpga_routing | AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K) {
+ if (aic32x4->micpga_routing & AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K) {
snd_soc_write(codec, AIC32X4_RMICPGANIN, AIC32X4_RMICPGANIN_IN1L_10K);
}
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 0963c4c..7a49390 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -76,7 +76,6 @@
struct aic3x_disable_nb disable_nb[AIC3X_NUM_SUPPLIES];
enum snd_soc_control_type control_type;
struct aic3x_setup_data *setup;
- void *control_data;
unsigned int sysclk;
struct list_head list;
int master;
@@ -138,7 +137,10 @@
if (reg >= AIC3X_CACHEREGNUM)
return -1;
- *value = codec->hw_read(codec, reg);
+ codec->cache_bypass = 1;
+ *value = snd_soc_read(codec, reg);
+ codec->cache_bypass = 0;
+
cache[reg] = *value;
return 0;
@@ -198,6 +200,10 @@
else
/* old connection must be powered down */
path->connect = invert ? 1 : 0;
+
+ dapm_mark_dirty(path->source, "tlv320aic3x source");
+ dapm_mark_dirty(path->sink, "tlv320aic3x sink");
+
break;
}
@@ -1383,7 +1389,6 @@
int ret, i;
INIT_LIST_HEAD(&aic3x->list);
- codec->control_data = aic3x->control_data;
aic3x->codec = codec;
codec->dapm.idle_bias_off = 1;
@@ -1495,9 +1500,9 @@
*/
static const struct i2c_device_id aic3x_i2c_id[] = {
- [AIC3X_MODEL_3X] = { "tlv320aic3x", 0 },
- [AIC3X_MODEL_33] = { "tlv320aic33", 0 },
- [AIC3X_MODEL_3007] = { "tlv320aic3007", 0 },
+ { "tlv320aic3x", AIC3X_MODEL_3X },
+ { "tlv320aic33", AIC3X_MODEL_33 },
+ { "tlv320aic3007", AIC3X_MODEL_3007 },
{ }
};
MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
@@ -1512,7 +1517,6 @@
struct aic3x_pdata *pdata = i2c->dev.platform_data;
struct aic3x_priv *aic3x;
int ret;
- const struct i2c_device_id *tbl;
aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL);
if (aic3x == NULL) {
@@ -1520,7 +1524,6 @@
return -ENOMEM;
}
- aic3x->control_data = i2c;
aic3x->control_type = SND_SOC_I2C;
i2c_set_clientdata(i2c, aic3x);
@@ -1531,11 +1534,7 @@
aic3x->gpio_reset = -1;
}
- for (tbl = aic3x_i2c_id; tbl->name[0]; tbl++) {
- if (!strcmp(tbl->name, id->name))
- break;
- }
- aic3x->model = tbl - aic3x_i2c_id;
+ aic3x->model = id->driver_data;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_aic3x, &aic3x_dai, 1);
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index faa5e9f..dc8a2b2 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -55,13 +55,13 @@
#define BURST_BASEFREQ_HZ 49152000
#define SAMPLES_TO_US(rate, samples) \
- (1000000000 / ((rate * 1000) / samples))
+ (1000000000 / (((rate) * 1000) / (samples)))
#define US_TO_SAMPLES(rate, us) \
- (rate / (1000000 / (us < 1000000 ? us : 1000000)))
+ ((rate) / (1000000 / ((us) < 1000000 ? (us) : 1000000)))
#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \
- ((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate)))
+ (((samples)*5000) / (((burstrate)*5000) / ((burstrate) - (playrate))))
static void dac33_calculate_times(struct snd_pcm_substream *substream);
static int dac33_prepare_chip(struct snd_pcm_substream *substream);
@@ -627,18 +627,6 @@
{"RIGHT_LO", NULL, "Codec Power"},
};
-static int dac33_add_widgets(struct snd_soc_codec *codec)
-{
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- snd_soc_dapm_new_controls(dapm, dac33_dapm_widgets,
- ARRAY_SIZE(dac33_dapm_widgets));
- /* set up audio path interconnects */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- return 0;
-}
-
static int dac33_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
@@ -1431,7 +1419,7 @@
/* Check if the IRQ number is valid and request it */
if (dac33->irq >= 0) {
ret = request_irq(dac33->irq, dac33_interrupt_handler,
- IRQF_TRIGGER_RISING | IRQF_DISABLED,
+ IRQF_TRIGGER_RISING,
codec->name, codec);
if (ret < 0) {
dev_err(codec->dev, "Could not request IRQ%d (%d)\n",
@@ -1451,15 +1439,11 @@
}
}
- snd_soc_add_controls(codec, dac33_snd_controls,
- ARRAY_SIZE(dac33_snd_controls));
/* Only add the FIFO controls, if we have valid IRQ number */
if (dac33->irq >= 0)
snd_soc_add_controls(codec, dac33_mode_snd_controls,
ARRAY_SIZE(dac33_mode_snd_controls));
- dac33_add_widgets(codec);
-
err_power:
return ret;
}
@@ -1502,6 +1486,13 @@
.remove = dac33_soc_remove,
.suspend = dac33_soc_suspend,
.resume = dac33_soc_resume,
+
+ .controls = dac33_snd_controls,
+ .num_controls = ARRAY_SIZE(dac33_snd_controls),
+ .dapm_widgets = dac33_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(dac33_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
#define DAC33_RATES (SNDRV_PCM_RATE_44100 | \
diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
index 239e0c4..7eeca79d 100644
--- a/sound/soc/codecs/tpa6130a2.c
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -33,6 +33,11 @@
#include "tpa6130a2.h"
+enum tpa_model {
+ TPA6130A2,
+ TPA6140A2,
+};
+
static struct i2c_client *tpa6130a2_client;
/* This struct is used to save the context */
@@ -383,7 +388,7 @@
pdata = client->dev.platform_data;
data->power_gpio = pdata->power_gpio;
- data->id = pdata->id;
+ data->id = id->driver_data;
mutex_init(&data->mutex);
@@ -405,7 +410,7 @@
switch (data->id) {
default:
dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
- pdata->id);
+ data->id);
case TPA6130A2:
regulator = "Vdd";
break;
@@ -446,7 +451,6 @@
gpio_free(data->power_gpio);
err_gpio:
kfree(data);
- i2c_set_clientdata(tpa6130a2_client, NULL);
tpa6130a2_client = NULL;
return ret;
@@ -470,7 +474,8 @@
}
static const struct i2c_device_id tpa6130a2_id[] = {
- { "tpa6130a2", 0 },
+ { "tpa6130a2", TPA6130A2 },
+ { "tpa6140a2", TPA6140A2 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 71674be..f798247 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -863,34 +863,6 @@
* Inverting not going to help with these.
* Custom volsw and volsw_2r get/put functions to handle these gain bits.
*/
-#define SOC_DOUBLE_TLV_TWL4030(xname, xreg, shift_left, shift_right, xmax,\
- xinvert, tlv_array) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
- SNDRV_CTL_ELEM_ACCESS_READWRITE,\
- .tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw, \
- .get = snd_soc_get_volsw_twl4030, \
- .put = snd_soc_put_volsw_twl4030, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = shift_left, .rshift = shift_right,\
- .max = xmax, .invert = xinvert} }
-#define SOC_DOUBLE_R_TLV_TWL4030(xname, reg_left, reg_right, xshift, xmax,\
- xinvert, tlv_array) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
- SNDRV_CTL_ELEM_ACCESS_READWRITE,\
- .tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw_2r, \
- .get = snd_soc_get_volsw_r2_twl4030,\
- .put = snd_soc_put_volsw_r2_twl4030, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
- .rshift = xshift, .max = xmax, .invert = xinvert} }
-#define SOC_SINGLE_TLV_TWL4030(xname, xreg, xshift, xmax, xinvert, tlv_array) \
- SOC_DOUBLE_TLV_TWL4030(xname, xreg, xshift, xshift, xmax, \
- xinvert, tlv_array)
-
static int snd_soc_get_volsw_twl4030(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -1197,19 +1169,23 @@
TWL4030_REG_VDL_APGA_CTL, 1, 1, 0),
/* Separate output gain controls */
- SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume",
+ SOC_DOUBLE_R_EXT_TLV("PreDriv Playback Volume",
TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL,
- 4, 3, 0, output_tvl),
+ 4, 3, 0, snd_soc_get_volsw_r2_twl4030,
+ snd_soc_put_volsw_r2_twl4030, output_tvl),
- SOC_DOUBLE_TLV_TWL4030("Headset Playback Volume",
- TWL4030_REG_HS_GAIN_SET, 0, 2, 3, 0, output_tvl),
+ SOC_DOUBLE_EXT_TLV("Headset Playback Volume",
+ TWL4030_REG_HS_GAIN_SET, 0, 2, 3, 0, snd_soc_get_volsw_twl4030,
+ snd_soc_put_volsw_twl4030, output_tvl),
- SOC_DOUBLE_R_TLV_TWL4030("Carkit Playback Volume",
+ SOC_DOUBLE_R_EXT_TLV("Carkit Playback Volume",
TWL4030_REG_PRECKL_CTL, TWL4030_REG_PRECKR_CTL,
- 4, 3, 0, output_tvl),
+ 4, 3, 0, snd_soc_get_volsw_r2_twl4030,
+ snd_soc_put_volsw_r2_twl4030, output_tvl),
- SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
- TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl),
+ SOC_SINGLE_EXT_TLV("Earpiece Playback Volume",
+ TWL4030_REG_EAR_CTL, 4, 3, 0, snd_soc_get_volsw_twl4030,
+ snd_soc_put_volsw_twl4030, output_ear_tvl),
/* Common capture gain controls */
SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume",
@@ -1633,17 +1609,6 @@
};
-static int twl4030_add_widgets(struct snd_soc_codec *codec)
-{
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- snd_soc_dapm_new_controls(dapm, twl4030_dapm_widgets,
- ARRAY_SIZE(twl4030_dapm_widgets));
- snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
-
- return 0;
-}
-
static int twl4030_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
@@ -2265,9 +2230,6 @@
twl4030_init_chip(codec);
- snd_soc_add_controls(codec, twl4030_snd_controls,
- ARRAY_SIZE(twl4030_snd_controls));
- twl4030_add_widgets(codec);
return 0;
}
@@ -2293,6 +2255,13 @@
.reg_cache_size = sizeof(twl4030_reg),
.reg_word_size = sizeof(u8),
.reg_cache_default = twl4030_reg,
+
+ .controls = twl4030_snd_controls,
+ .num_controls = ARRAY_SIZE(twl4030_snd_controls),
+ .dapm_widgets = twl4030_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(twl4030_dapm_widgets),
+ .dapm_routes = intercon,
+ .num_dapm_routes = ARRAY_SIZE(intercon),
};
static int __devinit twl4030_codec_probe(struct platform_device *pdev)
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 443032b..73e11f0 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -57,6 +57,13 @@
#define TWL6040_HF_VOL_MASK 0x1F
#define TWL6040_HF_VOL_SHIFT 0
+/* Shadow register used by the driver */
+#define TWL6040_REG_SW_SHADOW 0x2F
+#define TWL6040_CACHEREGNUM (TWL6040_REG_SW_SHADOW + 1)
+
+/* TWL6040_REG_SW_SHADOW (0x2F) fields */
+#define TWL6040_EAR_PATH_ENABLE 0x01
+
struct twl6040_output {
u16 active;
u16 left_vol;
@@ -65,12 +72,13 @@
u16 right_step;
unsigned int step_delay;
u16 ramp;
- u16 mute;
+ struct delayed_work work;
struct completion ramp_done;
};
struct twl6040_jack_data {
struct snd_soc_jack *jack;
+ struct delayed_work work;
int report;
};
@@ -79,7 +87,6 @@
int plug_irq;
int codec_powered;
int pll;
- int non_lp;
int pll_power_mode;
int hs_power_mode;
int hs_power_mode_locked;
@@ -92,104 +99,68 @@
struct twl6040_jack_data hs_jack;
struct snd_soc_codec *codec;
struct workqueue_struct *workqueue;
- struct delayed_work delayed_work;
struct mutex mutex;
struct twl6040_output headset;
struct twl6040_output handsfree;
- struct workqueue_struct *hf_workqueue;
- struct workqueue_struct *hs_workqueue;
- struct delayed_work hs_delayed_work;
- struct delayed_work hf_delayed_work;
};
/*
* twl6040 register cache & default register settings
*/
static const u8 twl6040_reg[TWL6040_CACHEREGNUM] = {
- 0x00, /* not used 0x00 */
- 0x4B, /* TWL6040_ASICID (ro) 0x01 */
- 0x00, /* TWL6040_ASICREV (ro) 0x02 */
- 0x00, /* TWL6040_INTID 0x03 */
- 0x00, /* TWL6040_INTMR 0x04 */
- 0x00, /* TWL6040_NCPCTRL 0x05 */
- 0x00, /* TWL6040_LDOCTL 0x06 */
- 0x60, /* TWL6040_HPPLLCTL 0x07 */
- 0x00, /* TWL6040_LPPLLCTL 0x08 */
- 0x4A, /* TWL6040_LPPLLDIV 0x09 */
- 0x00, /* TWL6040_AMICBCTL 0x0A */
- 0x00, /* TWL6040_DMICBCTL 0x0B */
- 0x18, /* TWL6040_MICLCTL 0x0C - No input selected on Left Mic */
- 0x18, /* TWL6040_MICRCTL 0x0D - No input selected on Right Mic */
- 0x00, /* TWL6040_MICGAIN 0x0E */
- 0x1B, /* TWL6040_LINEGAIN 0x0F */
- 0x00, /* TWL6040_HSLCTL 0x10 */
- 0x00, /* TWL6040_HSRCTL 0x11 */
- 0x00, /* TWL6040_HSGAIN 0x12 */
- 0x00, /* TWL6040_EARCTL 0x13 */
- 0x00, /* TWL6040_HFLCTL 0x14 */
- 0x00, /* TWL6040_HFLGAIN 0x15 */
- 0x00, /* TWL6040_HFRCTL 0x16 */
- 0x00, /* TWL6040_HFRGAIN 0x17 */
- 0x00, /* TWL6040_VIBCTLL 0x18 */
- 0x00, /* TWL6040_VIBDATL 0x19 */
- 0x00, /* TWL6040_VIBCTLR 0x1A */
- 0x00, /* TWL6040_VIBDATR 0x1B */
- 0x00, /* TWL6040_HKCTL1 0x1C */
- 0x00, /* TWL6040_HKCTL2 0x1D */
- 0x00, /* TWL6040_GPOCTL 0x1E */
- 0x00, /* TWL6040_ALB 0x1F */
- 0x00, /* TWL6040_DLB 0x20 */
- 0x00, /* not used 0x21 */
- 0x00, /* not used 0x22 */
- 0x00, /* not used 0x23 */
- 0x00, /* not used 0x24 */
- 0x00, /* not used 0x25 */
- 0x00, /* not used 0x26 */
- 0x00, /* not used 0x27 */
- 0x00, /* TWL6040_TRIM1 0x28 */
- 0x00, /* TWL6040_TRIM2 0x29 */
- 0x00, /* TWL6040_TRIM3 0x2A */
- 0x00, /* TWL6040_HSOTRIM 0x2B */
- 0x00, /* TWL6040_HFOTRIM 0x2C */
- 0x09, /* TWL6040_ACCCTL 0x2D */
- 0x00, /* TWL6040_STATUS (ro) 0x2E */
+ 0x00, /* not used 0x00 */
+ 0x4B, /* REG_ASICID 0x01 (ro) */
+ 0x00, /* REG_ASICREV 0x02 (ro) */
+ 0x00, /* REG_INTID 0x03 */
+ 0x00, /* REG_INTMR 0x04 */
+ 0x00, /* REG_NCPCTRL 0x05 */
+ 0x00, /* REG_LDOCTL 0x06 */
+ 0x60, /* REG_HPPLLCTL 0x07 */
+ 0x00, /* REG_LPPLLCTL 0x08 */
+ 0x4A, /* REG_LPPLLDIV 0x09 */
+ 0x00, /* REG_AMICBCTL 0x0A */
+ 0x00, /* REG_DMICBCTL 0x0B */
+ 0x00, /* REG_MICLCTL 0x0C */
+ 0x00, /* REG_MICRCTL 0x0D */
+ 0x00, /* REG_MICGAIN 0x0E */
+ 0x1B, /* REG_LINEGAIN 0x0F */
+ 0x00, /* REG_HSLCTL 0x10 */
+ 0x00, /* REG_HSRCTL 0x11 */
+ 0x00, /* REG_HSGAIN 0x12 */
+ 0x00, /* REG_EARCTL 0x13 */
+ 0x00, /* REG_HFLCTL 0x14 */
+ 0x00, /* REG_HFLGAIN 0x15 */
+ 0x00, /* REG_HFRCTL 0x16 */
+ 0x00, /* REG_HFRGAIN 0x17 */
+ 0x00, /* REG_VIBCTLL 0x18 */
+ 0x00, /* REG_VIBDATL 0x19 */
+ 0x00, /* REG_VIBCTLR 0x1A */
+ 0x00, /* REG_VIBDATR 0x1B */
+ 0x00, /* REG_HKCTL1 0x1C */
+ 0x00, /* REG_HKCTL2 0x1D */
+ 0x00, /* REG_GPOCTL 0x1E */
+ 0x00, /* REG_ALB 0x1F */
+ 0x00, /* REG_DLB 0x20 */
+ 0x00, /* not used 0x21 */
+ 0x00, /* not used 0x22 */
+ 0x00, /* not used 0x23 */
+ 0x00, /* not used 0x24 */
+ 0x00, /* not used 0x25 */
+ 0x00, /* not used 0x26 */
+ 0x00, /* not used 0x27 */
+ 0x00, /* REG_TRIM1 0x28 */
+ 0x00, /* REG_TRIM2 0x29 */
+ 0x00, /* REG_TRIM3 0x2A */
+ 0x00, /* REG_HSOTRIM 0x2B */
+ 0x00, /* REG_HFOTRIM 0x2C */
+ 0x09, /* REG_ACCCTL 0x2D */
+ 0x00, /* REG_STATUS 0x2E (ro) */
+
+ 0x00, /* REG_SW_SHADOW 0x2F - Shadow, non HW register */
};
-/*
- * twl6040 vio/gnd registers:
- * registers under vio/gnd supply can be accessed
- * before the power-up sequence, after NRESPWRON goes high
- */
-static const int twl6040_vio_reg[TWL6040_VIOREGNUM] = {
- TWL6040_REG_ASICID,
- TWL6040_REG_ASICREV,
- TWL6040_REG_INTID,
- TWL6040_REG_INTMR,
- TWL6040_REG_NCPCTL,
- TWL6040_REG_LDOCTL,
- TWL6040_REG_AMICBCTL,
- TWL6040_REG_DMICBCTL,
- TWL6040_REG_HKCTL1,
- TWL6040_REG_HKCTL2,
- TWL6040_REG_GPOCTL,
- TWL6040_REG_TRIM1,
- TWL6040_REG_TRIM2,
- TWL6040_REG_TRIM3,
- TWL6040_REG_HSOTRIM,
- TWL6040_REG_HFOTRIM,
- TWL6040_REG_ACCCTL,
- TWL6040_REG_STATUS,
-};
-
-/*
- * twl6040 vdd/vss registers:
- * registers under vdd/vss supplies can only be accessed
- * after the power-up sequence
- */
-static const int twl6040_vdd_reg[TWL6040_VDDREGNUM] = {
- TWL6040_REG_HPPLLCTL,
- TWL6040_REG_LPPLLCTL,
- TWL6040_REG_LPPLLDIV,
+/* List of registers to be restored after power up */
+static const int twl6040_restore_list[] = {
TWL6040_REG_MICLCTL,
TWL6040_REG_MICRCTL,
TWL6040_REG_MICGAIN,
@@ -202,12 +173,6 @@
TWL6040_REG_HFLGAIN,
TWL6040_REG_HFRCTL,
TWL6040_REG_HFRGAIN,
- TWL6040_REG_VIBCTLL,
- TWL6040_REG_VIBDATL,
- TWL6040_REG_VIBCTLR,
- TWL6040_REG_VIBDATR,
- TWL6040_REG_ALB,
- TWL6040_REG_DLB,
};
/* set of rates for each pll: low-power and high-performance */
@@ -275,8 +240,12 @@
if (reg >= TWL6040_CACHEREGNUM)
return -EIO;
- value = twl6040_reg_read(twl6040, reg);
- twl6040_write_reg_cache(codec, reg, value);
+ if (likely(reg < TWL6040_REG_SW_SHADOW)) {
+ value = twl6040_reg_read(twl6040, reg);
+ twl6040_write_reg_cache(codec, reg, value);
+ } else {
+ value = twl6040_read_reg_cache(codec, reg);
+ }
return value;
}
@@ -293,59 +262,51 @@
return -EIO;
twl6040_write_reg_cache(codec, reg, value);
- return twl6040_reg_write(twl6040, reg, value);
+ if (likely(reg < TWL6040_REG_SW_SHADOW))
+ return twl6040_reg_write(twl6040, reg, value);
+ else
+ return 0;
}
-static void twl6040_init_vio_regs(struct snd_soc_codec *codec)
+static void twl6040_init_chip(struct snd_soc_codec *codec)
+{
+ struct twl6040 *twl6040 = codec->control_data;
+ u8 val;
+
+ /* Update reg_cache: ASICREV, and TRIM values */
+ val = twl6040_get_revid(twl6040);
+ twl6040_write_reg_cache(codec, TWL6040_REG_ASICREV, val);
+
+ twl6040_read_reg_volatile(codec, TWL6040_REG_TRIM1);
+ twl6040_read_reg_volatile(codec, TWL6040_REG_TRIM2);
+ twl6040_read_reg_volatile(codec, TWL6040_REG_TRIM3);
+ twl6040_read_reg_volatile(codec, TWL6040_REG_HSOTRIM);
+ twl6040_read_reg_volatile(codec, TWL6040_REG_HFOTRIM);
+
+ /* Change chip defaults */
+ /* No imput selected for microphone amplifiers */
+ twl6040_write_reg_cache(codec, TWL6040_REG_MICLCTL, 0x18);
+ twl6040_write_reg_cache(codec, TWL6040_REG_MICRCTL, 0x18);
+
+ /*
+ * We need to lower the default gain values, so the ramp code
+ * can work correctly for the first playback.
+ * This reduces the pop noise heard at the first playback.
+ */
+ twl6040_write_reg_cache(codec, TWL6040_REG_HSGAIN, 0xff);
+ twl6040_write_reg_cache(codec, TWL6040_REG_EARCTL, 0x1e);
+ twl6040_write_reg_cache(codec, TWL6040_REG_HFLGAIN, 0x1d);
+ twl6040_write_reg_cache(codec, TWL6040_REG_HFRGAIN, 0x1d);
+ twl6040_write_reg_cache(codec, TWL6040_REG_LINEGAIN, 0);
+}
+
+static void twl6040_restore_regs(struct snd_soc_codec *codec)
{
u8 *cache = codec->reg_cache;
int reg, i;
- for (i = 0; i < TWL6040_VIOREGNUM; i++) {
- reg = twl6040_vio_reg[i];
- /*
- * skip read-only registers (ASICID, ASICREV, STATUS)
- * and registers shared among MFD children
- */
- switch (reg) {
- case TWL6040_REG_ASICID:
- case TWL6040_REG_ASICREV:
- case TWL6040_REG_INTID:
- case TWL6040_REG_INTMR:
- case TWL6040_REG_NCPCTL:
- case TWL6040_REG_LDOCTL:
- case TWL6040_REG_GPOCTL:
- case TWL6040_REG_ACCCTL:
- case TWL6040_REG_STATUS:
- continue;
- default:
- break;
- }
- twl6040_write(codec, reg, cache[reg]);
- }
-}
-
-static void twl6040_init_vdd_regs(struct snd_soc_codec *codec)
-{
- u8 *cache = codec->reg_cache;
- int reg, i;
-
- for (i = 0; i < TWL6040_VDDREGNUM; i++) {
- reg = twl6040_vdd_reg[i];
- /* skip vibra and PLL registers */
- switch (reg) {
- case TWL6040_REG_VIBCTLL:
- case TWL6040_REG_VIBDATL:
- case TWL6040_REG_VIBCTLR:
- case TWL6040_REG_VIBDATR:
- case TWL6040_REG_HPPLLCTL:
- case TWL6040_REG_LPPLLCTL:
- case TWL6040_REG_LPPLLDIV:
- continue;
- default:
- break;
- }
-
+ for (i = 0; i < ARRAY_SIZE(twl6040_restore_list); i++) {
+ reg = twl6040_restore_list[i];
twl6040_write(codec, reg, cache[reg]);
}
}
@@ -524,18 +485,17 @@
static void twl6040_pga_hs_work(struct work_struct *work)
{
struct twl6040_data *priv =
- container_of(work, struct twl6040_data, hs_delayed_work.work);
+ container_of(work, struct twl6040_data, headset.work.work);
struct snd_soc_codec *codec = priv->codec;
struct twl6040_output *headset = &priv->headset;
- unsigned int delay = headset->step_delay;
int i, headset_complete;
/* do we need to ramp at all ? */
if (headset->ramp == TWL6040_RAMP_NONE)
return;
- /* HS PGA volumes have 4 bits of resolution to ramp */
- for (i = 0; i <= 16; i++) {
+ /* HS PGA gain range: 0x0 - 0xf (0 - 15) */
+ for (i = 0; i < 16; i++) {
headset_complete = twl6040_hs_ramp_step(codec,
headset->left_step,
headset->right_step);
@@ -544,15 +504,8 @@
if (headset_complete)
break;
- /*
- * TODO: tune: delay is longer over 0dB
- * as increases are larger.
- */
- if (i >= 8)
- schedule_timeout_interruptible(msecs_to_jiffies(delay +
- (delay >> 1)));
- else
- schedule_timeout_interruptible(msecs_to_jiffies(delay));
+ schedule_timeout_interruptible(
+ msecs_to_jiffies(headset->step_delay));
}
if (headset->ramp == TWL6040_RAMP_DOWN) {
@@ -567,18 +520,18 @@
static void twl6040_pga_hf_work(struct work_struct *work)
{
struct twl6040_data *priv =
- container_of(work, struct twl6040_data, hf_delayed_work.work);
+ container_of(work, struct twl6040_data, handsfree.work.work);
struct snd_soc_codec *codec = priv->codec;
struct twl6040_output *handsfree = &priv->handsfree;
- unsigned int delay = handsfree->step_delay;
int i, handsfree_complete;
/* do we need to ramp at all ? */
if (handsfree->ramp == TWL6040_RAMP_NONE)
return;
- /* HF PGA volumes have 5 bits of resolution to ramp */
- for (i = 0; i <= 32; i++) {
+ /*
+ * HF PGA gain range: 0x00 - 0x1d (0 - 29) */
+ for (i = 0; i < 30; i++) {
handsfree_complete = twl6040_hf_ramp_step(codec,
handsfree->left_step,
handsfree->right_step);
@@ -587,15 +540,8 @@
if (handsfree_complete)
break;
- /*
- * TODO: tune: delay is longer over 0dB
- * as increases are larger.
- */
- if (i >= 16)
- schedule_timeout_interruptible(msecs_to_jiffies(delay +
- (delay >> 1)));
- else
- schedule_timeout_interruptible(msecs_to_jiffies(delay));
+ schedule_timeout_interruptible(
+ msecs_to_jiffies(handsfree->step_delay));
}
@@ -607,36 +553,40 @@
handsfree->ramp = TWL6040_RAMP_NONE;
}
-static int pga_event(struct snd_soc_dapm_widget *w,
+static int out_drv_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
struct twl6040_output *out;
struct delayed_work *work;
- struct workqueue_struct *queue;
switch (w->shift) {
- case 2:
- case 3:
+ case 2: /* Headset output driver */
out = &priv->headset;
- work = &priv->hs_delayed_work;
- queue = priv->hs_workqueue;
+ work = &out->work;
+ /*
+ * Make sure, that we do not mess up variables for already
+ * executing work.
+ */
+ cancel_delayed_work_sync(work);
+
out->left_step = priv->hs_left_step;
out->right_step = priv->hs_right_step;
out->step_delay = 5; /* 5 ms between volume ramp steps */
break;
- case 4:
+ case 4: /* Handsfree output driver */
out = &priv->handsfree;
- work = &priv->hf_delayed_work;
- queue = priv->hf_workqueue;
+ work = &out->work;
+ /*
+ * Make sure, that we do not mess up variables for already
+ * executing work.
+ */
+ cancel_delayed_work_sync(work);
+
out->left_step = priv->hf_left_step;
out->right_step = priv->hf_right_step;
out->step_delay = 5; /* 5 ms between volume ramp steps */
- if (SND_SOC_DAPM_EVENT_ON(event))
- priv->non_lp++;
- else
- priv->non_lp--;
break;
default:
return -1;
@@ -648,31 +598,25 @@
break;
/* don't use volume ramp for power-up */
+ out->ramp = TWL6040_RAMP_UP;
out->left_step = out->left_vol;
out->right_step = out->right_vol;
- if (!delayed_work_pending(work)) {
- out->ramp = TWL6040_RAMP_UP;
- queue_delayed_work(queue, work,
- msecs_to_jiffies(1));
- }
+ queue_delayed_work(priv->workqueue, work, msecs_to_jiffies(1));
break;
case SND_SOC_DAPM_PRE_PMD:
if (!out->active)
break;
- if (!delayed_work_pending(work)) {
- /* use volume ramp for power-down */
- out->ramp = TWL6040_RAMP_DOWN;
- INIT_COMPLETION(out->ramp_done);
+ /* use volume ramp for power-down */
+ out->ramp = TWL6040_RAMP_DOWN;
+ INIT_COMPLETION(out->ramp_done);
- queue_delayed_work(queue, work,
- msecs_to_jiffies(1));
+ queue_delayed_work(priv->workqueue, work, msecs_to_jiffies(1));
- wait_for_completion_timeout(&out->ramp_done,
- msecs_to_jiffies(2000));
- }
+ wait_for_completion_timeout(&out->ramp_done,
+ msecs_to_jiffies(2000));
break;
}
@@ -683,7 +627,7 @@
static int headset_power_mode(struct snd_soc_codec *codec, int high_perf)
{
int hslctl, hsrctl;
- int mask = TWL6040_HSDRVMODEL | TWL6040_HSDACMODEL;
+ int mask = TWL6040_HSDRVMODE | TWL6040_HSDACMODE;
hslctl = twl6040_read_reg_cache(codec, TWL6040_REG_HSLCTL);
hsrctl = twl6040_read_reg_cache(codec, TWL6040_REG_HSRCTL);
@@ -705,11 +649,31 @@
static int twl6040_hs_dac_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
+ struct snd_soc_codec *codec = w->codec;
+ u8 hslctl, hsrctl;
+
+ /*
+ * Workaround for Headset DC offset caused pop noise:
+ * Both HS DAC need to be turned on (before the HS driver) and off at
+ * the same time.
+ */
+ hslctl = twl6040_read_reg_cache(codec, TWL6040_REG_HSLCTL);
+ hsrctl = twl6040_read_reg_cache(codec, TWL6040_REG_HSRCTL);
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ hslctl |= TWL6040_HSDACENA;
+ hsrctl |= TWL6040_HSDACENA;
+ } else {
+ hslctl &= ~TWL6040_HSDACENA;
+ hsrctl &= ~TWL6040_HSDACENA;
+ }
+ twl6040_write(codec, TWL6040_REG_HSLCTL, hslctl);
+ twl6040_write(codec, TWL6040_REG_HSRCTL, hsrctl);
+
msleep(1);
return 0;
}
-static int twl6040_power_mode_event(struct snd_soc_dapm_widget *w,
+static int twl6040_ep_drv_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
@@ -717,18 +681,12 @@
int ret = 0;
if (SND_SOC_DAPM_EVENT_ON(event)) {
- priv->non_lp++;
- if (!strcmp(w->name, "Earphone Driver")) {
- /* Earphone doesn't support low power mode */
- priv->hs_power_mode_locked = 1;
- ret = headset_power_mode(codec, 1);
- }
+ /* Earphone doesn't support low power mode */
+ priv->hs_power_mode_locked = 1;
+ ret = headset_power_mode(codec, 1);
} else {
- priv->non_lp--;
- if (!strcmp(w->name, "Earphone Driver")) {
- priv->hs_power_mode_locked = 0;
- ret = headset_power_mode(codec, priv->hs_power_mode);
- }
+ priv->hs_power_mode_locked = 0;
+ ret = headset_power_mode(codec, priv->hs_power_mode);
}
msleep(1);
@@ -770,7 +728,7 @@
static void twl6040_accessory_work(struct work_struct *work)
{
struct twl6040_data *priv = container_of(work,
- struct twl6040_data, delayed_work.work);
+ struct twl6040_data, hs_jack.work.work);
struct snd_soc_codec *codec = priv->codec;
struct twl6040_jack_data *hs_jack = &priv->hs_jack;
@@ -781,15 +739,10 @@
static irqreturn_t twl6040_audio_handler(int irq, void *data)
{
struct snd_soc_codec *codec = data;
- struct twl6040 *twl6040 = codec->control_data;
struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
- u8 intid;
- intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
-
- if ((intid & TWL6040_PLUGINT) || (intid & TWL6040_UNPLUGINT))
- queue_delayed_work(priv->workqueue, &priv->delayed_work,
- msecs_to_jiffies(200));
+ queue_delayed_work(priv->workqueue, &priv->hs_jack.work,
+ msecs_to_jiffies(200));
return IRQ_HANDLED;
}
@@ -803,25 +756,27 @@
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
int ret;
- unsigned int reg = mc->reg;
/* For HS and HF we shadow the values and only actually write
* them out when active in order to ensure the amplifier comes on
* as quietly as possible. */
- switch (reg) {
+ switch (mc->reg) {
case TWL6040_REG_HSGAIN:
out = &twl6040_priv->headset;
break;
- default:
+ case TWL6040_REG_HFLGAIN:
+ out = &twl6040_priv->handsfree;
break;
+ default:
+ dev_warn(codec->dev, "%s: Unexpected register: 0x%02x\n",
+ __func__, mc->reg);
+ return -EINVAL;
}
- if (out) {
- out->left_vol = ucontrol->value.integer.value[0];
- out->right_vol = ucontrol->value.integer.value[1];
- if (!out->active)
- return 1;
- }
+ out->left_vol = ucontrol->value.integer.value[0];
+ out->right_vol = ucontrol->value.integer.value[1];
+ if (!out->active)
+ return 1;
ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret < 0)
@@ -838,112 +793,42 @@
struct twl6040_output *out = &twl6040_priv->headset;
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
- unsigned int reg = mc->reg;
- switch (reg) {
+ switch (mc->reg) {
case TWL6040_REG_HSGAIN:
out = &twl6040_priv->headset;
- ucontrol->value.integer.value[0] = out->left_vol;
- ucontrol->value.integer.value[1] = out->right_vol;
- return 0;
-
- default:
break;
- }
-
- return snd_soc_get_volsw(kcontrol, ucontrol);
-}
-
-static int twl6040_put_volsw_2r_vu(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct twl6040_data *twl6040_priv = snd_soc_codec_get_drvdata(codec);
- struct twl6040_output *out = NULL;
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int ret;
- unsigned int reg = mc->reg;
-
- /* For HS and HF we shadow the values and only actually write
- * them out when active in order to ensure the amplifier comes on
- * as quietly as possible. */
- switch (reg) {
case TWL6040_REG_HFLGAIN:
- case TWL6040_REG_HFRGAIN:
out = &twl6040_priv->handsfree;
break;
default:
- break;
+ dev_warn(codec->dev, "%s: Unexpected register: 0x%02x\n",
+ __func__, mc->reg);
+ return -EINVAL;
}
- if (out) {
- out->left_vol = ucontrol->value.integer.value[0];
- out->right_vol = ucontrol->value.integer.value[1];
- if (!out->active)
- return 1;
- }
-
- ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
- if (ret < 0)
- return ret;
-
- return 1;
+ ucontrol->value.integer.value[0] = out->left_vol;
+ ucontrol->value.integer.value[1] = out->right_vol;
+ return 0;
}
-static int twl6040_get_volsw_2r(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+static int twl6040_soc_dapm_put_vibra_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct twl6040_data *twl6040_priv = snd_soc_codec_get_drvdata(codec);
- struct twl6040_output *out = &twl6040_priv->handsfree;
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- unsigned int reg = mc->reg;
+ struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_dapm_widget *widget = wlist->widgets[0];
+ struct snd_soc_codec *codec = widget->codec;
+ struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+ unsigned int val;
- /* If these are cached registers use the cache */
- switch (reg) {
- case TWL6040_REG_HFLGAIN:
- case TWL6040_REG_HFRGAIN:
- out = &twl6040_priv->handsfree;
- ucontrol->value.integer.value[0] = out->left_vol;
- ucontrol->value.integer.value[1] = out->right_vol;
- return 0;
+ /* Do not allow changes while Input/FF efect is running */
+ val = twl6040_read_reg_volatile(codec, e->reg);
+ if (val & TWL6040_VIBENA && !(val & TWL6040_VIBSEL))
+ return -EBUSY;
- default:
- break;
- }
-
- return snd_soc_get_volsw_2r(kcontrol, ucontrol);
+ return snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
}
-/* double control with volume update */
-#define SOC_TWL6040_DOUBLE_TLV(xname, xreg, shift_left, shift_right, xmax,\
- xinvert, tlv_array)\
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
- SNDRV_CTL_ELEM_ACCESS_READWRITE,\
- .tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw, .get = twl6040_get_volsw, \
- .put = twl6040_put_volsw, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = xreg, .shift = shift_left, .rshift = shift_right,\
- .max = xmax, .platform_max = xmax, .invert = xinvert} }
-
-/* double control with volume update */
-#define SOC_TWL6040_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax,\
- xinvert, tlv_array)\
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
- SNDRV_CTL_ELEM_ACCESS_READWRITE | \
- SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
- .tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw_2r, \
- .get = twl6040_get_volsw_2r, .put = twl6040_put_volsw_2r_vu, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
- .rshift = xshift, .max = xmax, .invert = xinvert}, }
-
/*
* MICATT volume control:
* from -6 to 0 dB in 6 dB steps
@@ -1015,6 +900,19 @@
twl6040_hf_texts),
};
+static const char *twl6040_vibrapath_texts[] = {
+ "Input FF", "Audio PDM"
+};
+
+static const struct soc_enum twl6040_vibra_enum[] = {
+ SOC_ENUM_SINGLE(TWL6040_REG_VIBCTLL, 1,
+ ARRAY_SIZE(twl6040_vibrapath_texts),
+ twl6040_vibrapath_texts),
+ SOC_ENUM_SINGLE(TWL6040_REG_VIBCTLR, 1,
+ ARRAY_SIZE(twl6040_vibrapath_texts),
+ twl6040_vibrapath_texts),
+};
+
static const struct snd_kcontrol_new amicl_control =
SOC_DAPM_ENUM("Route", twl6040_enum[0]);
@@ -1035,8 +933,25 @@
static const struct snd_kcontrol_new hfr_mux_controls =
SOC_DAPM_ENUM("Route", twl6040_hf_enum[1]);
-static const struct snd_kcontrol_new ep_driver_switch_controls =
- SOC_DAPM_SINGLE("Switch", TWL6040_REG_EARCTL, 0, 1, 0);
+static const struct snd_kcontrol_new ep_path_enable_control =
+ SOC_DAPM_SINGLE("Switch", TWL6040_REG_SW_SHADOW, 0, 1, 0);
+
+static const struct snd_kcontrol_new auxl_switch_control =
+ SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFLCTL, 6, 1, 0);
+
+static const struct snd_kcontrol_new auxr_switch_control =
+ SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFRCTL, 6, 1, 0);
+
+/* Vibra playback switches */
+static const struct snd_kcontrol_new vibral_mux_controls =
+ SOC_DAPM_ENUM_EXT("Route", twl6040_vibra_enum[0],
+ snd_soc_dapm_get_enum_double,
+ twl6040_soc_dapm_put_vibra_enum);
+
+static const struct snd_kcontrol_new vibrar_mux_controls =
+ SOC_DAPM_ENUM_EXT("Route", twl6040_vibra_enum[1],
+ snd_soc_dapm_get_enum_double,
+ twl6040_soc_dapm_put_vibra_enum);
/* Headset power mode */
static const char *twl6040_power_mode_texts[] = {
@@ -1105,6 +1020,15 @@
}
EXPORT_SYMBOL_GPL(twl6040_get_clk_id);
+int twl6040_get_trim_value(struct snd_soc_codec *codec, enum twl6040_trim trim)
+{
+ if (unlikely(trim >= TWL6040_TRIM_INVAL))
+ return -EINVAL;
+
+ return twl6040_read_reg_cache(codec, TWL6040_REG_TRIM1 + trim);
+}
+EXPORT_SYMBOL_GPL(twl6040_get_trim_value);
+
static const struct snd_kcontrol_new twl6040_snd_controls[] = {
/* Capture gains */
SOC_DOUBLE_TLV("Capture Preamplifier Volume",
@@ -1117,10 +1041,12 @@
TWL6040_REG_LINEGAIN, 0, 3, 7, 0, afm_amp_tlv),
/* Playback gains */
- SOC_TWL6040_DOUBLE_TLV("Headset Playback Volume",
- TWL6040_REG_HSGAIN, 0, 4, 0xF, 1, hs_tlv),
- SOC_TWL6040_DOUBLE_R_TLV("Handsfree Playback Volume",
- TWL6040_REG_HFLGAIN, TWL6040_REG_HFRGAIN, 0, 0x1D, 1, hf_tlv),
+ SOC_DOUBLE_EXT_TLV("Headset Playback Volume",
+ TWL6040_REG_HSGAIN, 0, 4, 0xF, 1, twl6040_get_volsw,
+ twl6040_put_volsw, hs_tlv),
+ SOC_DOUBLE_R_EXT_TLV("Handsfree Playback Volume",
+ TWL6040_REG_HFLGAIN, TWL6040_REG_HFRGAIN, 0, 0x1D, 1,
+ twl6040_get_volsw, twl6040_put_volsw, hf_tlv),
SOC_SINGLE_TLV("Earphone Playback Volume",
TWL6040_REG_EARCTL, 1, 0xF, 1, ep_tlv),
@@ -1146,6 +1072,10 @@
SND_SOC_DAPM_OUTPUT("HFL"),
SND_SOC_DAPM_OUTPUT("HFR"),
SND_SOC_DAPM_OUTPUT("EP"),
+ SND_SOC_DAPM_OUTPUT("AUXL"),
+ SND_SOC_DAPM_OUTPUT("AUXR"),
+ SND_SOC_DAPM_OUTPUT("VIBRAL"),
+ SND_SOC_DAPM_OUTPUT("VIBRAR"),
/* Analog input muxes for the capture amplifiers */
SND_SOC_DAPM_MUX("Analog Left Capture Route",
@@ -1182,59 +1112,76 @@
TWL6040_REG_DMICBCTL, 4, 0),
/* DACs */
- SND_SOC_DAPM_DAC_E("HSDAC Left", "Headset Playback",
- TWL6040_REG_HSLCTL, 0, 0,
- twl6040_hs_dac_event,
- SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_DAC_E("HSDAC Right", "Headset Playback",
- TWL6040_REG_HSRCTL, 0, 0,
- twl6040_hs_dac_event,
- SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_DAC_E("HFDAC Left", "Handsfree Playback",
- TWL6040_REG_HFLCTL, 0, 0,
- twl6040_power_mode_event,
- SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_DAC_E("HFDAC Right", "Handsfree Playback",
- TWL6040_REG_HFRCTL, 0, 0,
- twl6040_power_mode_event,
- SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_DAC("HSDAC Left", "Headset Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC("HSDAC Right", "Headset Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC("HFDAC Left", "Handsfree Playback",
+ TWL6040_REG_HFLCTL, 0, 0),
+ SND_SOC_DAPM_DAC("HFDAC Right", "Handsfree Playback",
+ TWL6040_REG_HFRCTL, 0, 0),
+ /* Virtual DAC for vibra path (DL4 channel) */
+ SND_SOC_DAPM_DAC("VIBRA DAC", "Vibra Playback",
+ SND_SOC_NOPM, 0, 0),
- SND_SOC_DAPM_MUX("HF Left Playback",
+ SND_SOC_DAPM_MUX("Handsfree Left Playback",
SND_SOC_NOPM, 0, 0, &hfl_mux_controls),
- SND_SOC_DAPM_MUX("HF Right Playback",
+ SND_SOC_DAPM_MUX("Handsfree Right Playback",
SND_SOC_NOPM, 0, 0, &hfr_mux_controls),
/* Analog playback Muxes */
- SND_SOC_DAPM_MUX("HS Left Playback",
+ SND_SOC_DAPM_MUX("Headset Left Playback",
SND_SOC_NOPM, 0, 0, &hsl_mux_controls),
- SND_SOC_DAPM_MUX("HS Right Playback",
+ SND_SOC_DAPM_MUX("Headset Right Playback",
SND_SOC_NOPM, 0, 0, &hsr_mux_controls),
+ SND_SOC_DAPM_MUX("Vibra Left Playback", SND_SOC_NOPM, 0, 0,
+ &vibral_mux_controls),
+ SND_SOC_DAPM_MUX("Vibra Right Playback", SND_SOC_NOPM, 0, 0,
+ &vibrar_mux_controls),
+
+ SND_SOC_DAPM_SWITCH("Earphone Playback", SND_SOC_NOPM, 0, 0,
+ &ep_path_enable_control),
+ SND_SOC_DAPM_SWITCH("AUXL Playback", SND_SOC_NOPM, 0, 0,
+ &auxl_switch_control),
+ SND_SOC_DAPM_SWITCH("AUXR Playback", SND_SOC_NOPM, 0, 0,
+ &auxr_switch_control),
+
/* Analog playback drivers */
- SND_SOC_DAPM_OUT_DRV_E("Handsfree Left Driver",
+ SND_SOC_DAPM_OUT_DRV_E("HF Left Driver",
TWL6040_REG_HFLCTL, 4, 0, NULL, 0,
- pga_event,
+ out_drv_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_OUT_DRV_E("Handsfree Right Driver",
+ SND_SOC_DAPM_OUT_DRV_E("HF Right Driver",
TWL6040_REG_HFRCTL, 4, 0, NULL, 0,
- pga_event,
+ out_drv_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_OUT_DRV_E("Headset Left Driver",
+ SND_SOC_DAPM_OUT_DRV_E("HS Left Driver",
TWL6040_REG_HSLCTL, 2, 0, NULL, 0,
- pga_event,
+ out_drv_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_OUT_DRV_E("Headset Right Driver",
+ SND_SOC_DAPM_OUT_DRV_E("HS Right Driver",
TWL6040_REG_HSRCTL, 2, 0, NULL, 0,
- pga_event,
+ out_drv_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_SWITCH_E("Earphone Driver",
- SND_SOC_NOPM, 0, 0, &ep_driver_switch_controls,
- twl6040_power_mode_event,
- SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_OUT_DRV_E("Earphone Driver",
+ TWL6040_REG_EARCTL, 0, 0, NULL, 0,
+ twl6040_ep_drv_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_OUT_DRV("Vibra Left Driver",
+ TWL6040_REG_VIBCTLL, 0, 0, NULL, 0),
+ SND_SOC_DAPM_OUT_DRV("Vibra Right Driver",
+ TWL6040_REG_VIBCTLR, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_SUPPLY("Vibra Left Control", TWL6040_REG_VIBCTLL, 2, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("Vibra Right Control", TWL6040_REG_VIBCTLR, 2, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY_S("HSDAC Power", 1, SND_SOC_NOPM, 0, 0,
+ twl6040_hs_dac_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
/* Analog playback PGAs */
- SND_SOC_DAPM_PGA("HFDAC Left PGA",
+ SND_SOC_DAPM_PGA("HF Left PGA",
TWL6040_REG_HFLCTL, 1, 0, NULL, 0),
- SND_SOC_DAPM_PGA("HFDAC Right PGA",
+ SND_SOC_DAPM_PGA("HF Right PGA",
TWL6040_REG_HFRCTL, 1, 0, NULL, 0),
};
@@ -1256,53 +1203,63 @@
{"ADC Right", NULL, "MicAmpR"},
/* AFM path */
- {"AFMAmpL", "NULL", "AFML"},
- {"AFMAmpR", "NULL", "AFMR"},
+ {"AFMAmpL", NULL, "AFML"},
+ {"AFMAmpR", NULL, "AFMR"},
- {"HS Left Playback", "HS DAC", "HSDAC Left"},
- {"HS Left Playback", "Line-In amp", "AFMAmpL"},
+ {"HSDAC Left", NULL, "HSDAC Power"},
+ {"HSDAC Right", NULL, "HSDAC Power"},
- {"HS Right Playback", "HS DAC", "HSDAC Right"},
- {"HS Right Playback", "Line-In amp", "AFMAmpR"},
+ {"Headset Left Playback", "HS DAC", "HSDAC Left"},
+ {"Headset Left Playback", "Line-In amp", "AFMAmpL"},
- {"Headset Left Driver", "NULL", "HS Left Playback"},
- {"Headset Right Driver", "NULL", "HS Right Playback"},
+ {"Headset Right Playback", "HS DAC", "HSDAC Right"},
+ {"Headset Right Playback", "Line-In amp", "AFMAmpR"},
- {"HSOL", NULL, "Headset Left Driver"},
- {"HSOR", NULL, "Headset Right Driver"},
+ {"HS Left Driver", NULL, "Headset Left Playback"},
+ {"HS Right Driver", NULL, "Headset Right Playback"},
+
+ {"HSOL", NULL, "HS Left Driver"},
+ {"HSOR", NULL, "HS Right Driver"},
/* Earphone playback path */
- {"Earphone Driver", "Switch", "HSDAC Left"},
+ {"Earphone Playback", "Switch", "HSDAC Left"},
+ {"Earphone Driver", NULL, "Earphone Playback"},
{"EP", NULL, "Earphone Driver"},
- {"HF Left Playback", "HF DAC", "HFDAC Left"},
- {"HF Left Playback", "Line-In amp", "AFMAmpL"},
+ {"Handsfree Left Playback", "HF DAC", "HFDAC Left"},
+ {"Handsfree Left Playback", "Line-In amp", "AFMAmpL"},
- {"HF Right Playback", "HF DAC", "HFDAC Right"},
- {"HF Right Playback", "Line-In amp", "AFMAmpR"},
+ {"Handsfree Right Playback", "HF DAC", "HFDAC Right"},
+ {"Handsfree Right Playback", "Line-In amp", "AFMAmpR"},
- {"HFDAC Left PGA", NULL, "HF Left Playback"},
- {"HFDAC Right PGA", NULL, "HF Right Playback"},
+ {"HF Left PGA", NULL, "Handsfree Left Playback"},
+ {"HF Right PGA", NULL, "Handsfree Right Playback"},
- {"Handsfree Left Driver", "Switch", "HFDAC Left PGA"},
- {"Handsfree Right Driver", "Switch", "HFDAC Right PGA"},
+ {"HF Left Driver", NULL, "HF Left PGA"},
+ {"HF Right Driver", NULL, "HF Right PGA"},
- {"HFL", NULL, "Handsfree Left Driver"},
- {"HFR", NULL, "Handsfree Right Driver"},
+ {"HFL", NULL, "HF Left Driver"},
+ {"HFR", NULL, "HF Right Driver"},
+
+ {"AUXL Playback", "Switch", "HF Left PGA"},
+ {"AUXR Playback", "Switch", "HF Right PGA"},
+
+ {"AUXL", NULL, "AUXL Playback"},
+ {"AUXR", NULL, "AUXR Playback"},
+
+ /* Vibrator paths */
+ {"Vibra Left Playback", "Audio PDM", "VIBRA DAC"},
+ {"Vibra Right Playback", "Audio PDM", "VIBRA DAC"},
+
+ {"Vibra Left Driver", NULL, "Vibra Left Playback"},
+ {"Vibra Right Driver", NULL, "Vibra Right Playback"},
+ {"Vibra Left Driver", NULL, "Vibra Left Control"},
+ {"Vibra Right Driver", NULL, "Vibra Right Control"},
+
+ {"VIBRAL", NULL, "Vibra Left Driver"},
+ {"VIBRAR", NULL, "Vibra Right Driver"},
};
-static int twl6040_add_widgets(struct snd_soc_codec *codec)
-{
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- snd_soc_dapm_new_controls(dapm, twl6040_dapm_widgets,
- ARRAY_SIZE(twl6040_dapm_widgets));
- snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
- snd_soc_dapm_new_widgets(dapm);
-
- return 0;
-}
-
static int twl6040_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
@@ -1325,8 +1282,7 @@
priv->codec_powered = 1;
- /* initialize vdd/vss registers with reg_cache */
- twl6040_init_vdd_regs(codec);
+ twl6040_restore_regs(codec);
/* Set external boost GPO */
twl6040_write(codec, TWL6040_REG_GPOCTL, 0x02);
@@ -1380,13 +1336,6 @@
rate);
return -EINVAL;
}
- /* Capture is not supported with 17.64MHz sysclk */
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- dev_err(codec->dev,
- "capture mode is not supported at %dHz\n",
- rate);
- return -EINVAL;
- }
priv->sysclk = 17640000;
break;
case 8000:
@@ -1419,13 +1368,6 @@
return -EINVAL;
}
- if ((priv->sysclk == 17640000) && priv->non_lp) {
- dev_err(codec->dev,
- "some enabled paths aren't supported at %dHz\n",
- priv->sysclk);
- return -EPERM;
- }
-
ret = twl6040_set_pll(twl6040, priv->pll, priv->clk_in, priv->sysclk);
if (ret) {
dev_err(codec->dev, "Can not set PLL (%d)\n", ret);
@@ -1464,11 +1406,11 @@
static struct snd_soc_dai_driver twl6040_dai[] = {
{
- .name = "twl6040-hifi",
+ .name = "twl6040-legacy",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
- .channels_max = 2,
+ .channels_max = 5,
.rates = TWL6040_RATES,
.formats = TWL6040_FORMATS,
},
@@ -1518,8 +1460,8 @@
.name = "twl6040-vib",
.playback = {
.stream_name = "Vibra Playback",
- .channels_min = 2,
- .channels_max = 2,
+ .channels_min = 1,
+ .channels_max = 1,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.formats = TWL6040_FORMATS,
},
@@ -1562,6 +1504,7 @@
priv->codec = codec;
codec->control_data = dev_get_drvdata(codec->dev->parent);
+ codec->ignore_pmdown_time = 1;
if (pdata && pdata->hs_left_step && pdata->hs_right_step) {
priv->hs_left_step = pdata->hs_left_step;
@@ -1586,33 +1529,21 @@
goto work_err;
}
- priv->workqueue = create_singlethread_workqueue("twl6040-codec");
+ priv->workqueue = alloc_workqueue("twl6040-codec", 0, 0);
if (!priv->workqueue) {
ret = -ENOMEM;
goto work_err;
}
- INIT_DELAYED_WORK(&priv->delayed_work, twl6040_accessory_work);
+ INIT_DELAYED_WORK(&priv->hs_jack.work, twl6040_accessory_work);
+ INIT_DELAYED_WORK(&priv->headset.work, twl6040_pga_hs_work);
+ INIT_DELAYED_WORK(&priv->handsfree.work, twl6040_pga_hf_work);
mutex_init(&priv->mutex);
init_completion(&priv->headset.ramp_done);
init_completion(&priv->handsfree.ramp_done);
- priv->hf_workqueue = create_singlethread_workqueue("twl6040-hf");
- if (priv->hf_workqueue == NULL) {
- ret = -ENOMEM;
- goto hfwq_err;
- }
- priv->hs_workqueue = create_singlethread_workqueue("twl6040-hs");
- if (priv->hs_workqueue == NULL) {
- ret = -ENOMEM;
- goto hswq_err;
- }
-
- INIT_DELAYED_WORK(&priv->hs_delayed_work, twl6040_pga_hs_work);
- INIT_DELAYED_WORK(&priv->hf_delayed_work, twl6040_pga_hf_work);
-
ret = request_threaded_irq(priv->plug_irq, NULL, twl6040_audio_handler,
0, "twl6040_irq_plug", codec);
if (ret) {
@@ -1620,27 +1551,16 @@
goto plugirq_err;
}
- /* init vio registers */
- twl6040_init_vio_regs(codec);
+ twl6040_init_chip(codec);
/* power on device */
ret = twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- if (ret)
- goto bias_err;
+ if (!ret)
+ return 0;
- snd_soc_add_controls(codec, twl6040_snd_controls,
- ARRAY_SIZE(twl6040_snd_controls));
- twl6040_add_widgets(codec);
-
- return 0;
-
-bias_err:
+ /* Error path */
free_irq(priv->plug_irq, codec);
plugirq_err:
- destroy_workqueue(priv->hs_workqueue);
-hswq_err:
- destroy_workqueue(priv->hf_workqueue);
-hfwq_err:
destroy_workqueue(priv->workqueue);
work_err:
kfree(priv);
@@ -1654,8 +1574,6 @@
twl6040_set_bias_level(codec, SND_SOC_BIAS_OFF);
free_irq(priv->plug_irq, codec);
destroy_workqueue(priv->workqueue);
- destroy_workqueue(priv->hf_workqueue);
- destroy_workqueue(priv->hs_workqueue);
kfree(priv);
return 0;
@@ -1672,6 +1590,13 @@
.reg_cache_size = ARRAY_SIZE(twl6040_reg),
.reg_word_size = sizeof(u8),
.reg_cache_default = twl6040_reg,
+
+ .controls = twl6040_snd_controls,
+ .num_controls = ARRAY_SIZE(twl6040_snd_controls),
+ .dapm_widgets = twl6040_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets),
+ .dapm_routes = intercon,
+ .num_dapm_routes = ARRAY_SIZE(intercon),
};
static int __devinit twl6040_codec_probe(struct platform_device *pdev)
diff --git a/sound/soc/codecs/twl6040.h b/sound/soc/codecs/twl6040.h
index d8de678..a83277b 100644
--- a/sound/soc/codecs/twl6040.h
+++ b/sound/soc/codecs/twl6040.h
@@ -22,8 +22,21 @@
#ifndef __TWL6040_H__
#define __TWL6040_H__
+enum twl6040_trim {
+ TWL6040_TRIM_TRIM1 = 0,
+ TWL6040_TRIM_TRIM2,
+ TWL6040_TRIM_TRIM3,
+ TWL6040_TRIM_HSOTRIM,
+ TWL6040_TRIM_HFOTRIM,
+ TWL6040_TRIM_INVAL,
+};
+
+#define TWL6040_HSF_TRIM_LEFT(x) (x & 0x0f)
+#define TWL6040_HSF_TRIM_RIGHT(x) ((x >> 4) & 0x0f)
+
void twl6040_hs_jack_detect(struct snd_soc_codec *codec,
struct snd_soc_jack *jack, int report);
int twl6040_get_clk_id(struct snd_soc_codec *codec);
+int twl6040_get_trim_value(struct snd_soc_codec *codec, enum twl6040_trim trim);
#endif /* End of __TWL6040_H__ */
diff --git a/sound/soc/codecs/wl1273.c b/sound/soc/codecs/wl1273.c
index 5836201..9fa1429 100644
--- a/sound/soc/codecs/wl1273.c
+++ b/sound/soc/codecs/wl1273.c
@@ -462,7 +462,6 @@
wl1273->core = *core;
snd_soc_codec_set_drvdata(codec, wl1273);
- mutex_init(&codec->mutex);
r = snd_soc_add_controls(codec, wl1273_controls,
ARRAY_SIZE(wl1273_controls));
diff --git a/sound/soc/codecs/wm1250-ev1.c b/sound/soc/codecs/wm1250-ev1.c
index bcc2089..cd0ec0f 100644
--- a/sound/soc/codecs/wm1250-ev1.c
+++ b/sound/soc/codecs/wm1250-ev1.c
@@ -12,10 +12,59 @@
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
+#include <sound/wm1250-ev1.h>
+
+static const char *wm1250_gpio_names[WM1250_EV1_NUM_GPIOS] = {
+ "WM1250 CLK_ENA",
+ "WM1250 CLK_SEL0",
+ "WM1250 CLK_SEL1",
+ "WM1250 OSR",
+ "WM1250 MASTER",
+};
+
+struct wm1250_priv {
+ struct gpio gpios[WM1250_EV1_NUM_GPIOS];
+};
+
+static int wm1250_ev1_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm1250_priv *wm1250 = dev_get_drvdata(codec->dev);
+ int ena;
+
+ if (wm1250)
+ ena = wm1250->gpios[WM1250_EV1_GPIO_CLK_ENA].gpio;
+ else
+ ena = -1;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (ena >= 0)
+ gpio_set_value_cansleep(ena, 1);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ if (ena >= 0)
+ gpio_set_value_cansleep(ena, 0);
+ break;
+ }
+
+ codec->dapm.bias_level = level;
+
+ return 0;
+}
static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = {
SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0),
@@ -53,18 +102,103 @@
.num_dapm_widgets = ARRAY_SIZE(wm1250_ev1_dapm_widgets),
.dapm_routes = wm1250_ev1_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(wm1250_ev1_dapm_routes),
+
+ .set_bias_level = wm1250_ev1_set_bias_level,
+ .idle_bias_off = true,
};
-static int __devinit wm1250_ev1_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int __devinit wm1250_ev1_pdata(struct i2c_client *i2c)
{
- return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm1250_ev1,
- &wm1250_ev1_dai, 1);
+ struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev);
+ struct wm1250_priv *wm1250;
+ int i, ret;
+
+ if (!pdata)
+ return 0;
+
+ wm1250 = kzalloc(sizeof(*wm1250), GFP_KERNEL);
+ if (!wm1250) {
+ dev_err(&i2c->dev, "Unable to allocate private data\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm1250->gpios); i++) {
+ wm1250->gpios[i].gpio = pdata->gpios[i];
+ wm1250->gpios[i].label = wm1250_gpio_names[i];
+ wm1250->gpios[i].flags = GPIOF_OUT_INIT_LOW;
+ }
+ wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].flags = GPIOF_OUT_INIT_HIGH;
+ wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].flags = GPIOF_OUT_INIT_HIGH;
+
+ ret = gpio_request_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios));
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to get GPIOs: %d\n", ret);
+ goto err_alloc;
+ }
+
+ dev_set_drvdata(&i2c->dev, wm1250);
+
+ return ret;
+
+err_alloc:
+ kfree(wm1250);
+err:
+ return ret;
+}
+
+static void wm1250_ev1_free(struct i2c_client *i2c)
+{
+ struct wm1250_priv *wm1250 = dev_get_drvdata(&i2c->dev);
+
+ if (wm1250) {
+ gpio_free_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios));
+ kfree(wm1250);
+ }
+}
+
+static int __devinit wm1250_ev1_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *i2c_id)
+{
+ int id, board, rev, ret;
+
+ dev_set_drvdata(&i2c->dev, NULL);
+
+ board = i2c_smbus_read_byte_data(i2c, 0);
+ if (board < 0) {
+ dev_err(&i2c->dev, "Failed to read ID: %d\n", board);
+ return board;
+ }
+
+ id = (board & 0xfe) >> 2;
+ rev = board & 0x3;
+
+ if (id != 1) {
+ dev_err(&i2c->dev, "Unknown board ID %d\n", id);
+ return -ENODEV;
+ }
+
+ dev_info(&i2c->dev, "revision %d\n", rev + 1);
+
+ ret = wm1250_ev1_pdata(i2c);
+ if (ret != 0)
+ return ret;
+
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm1250_ev1,
+ &wm1250_ev1_dai, 1);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
+ wm1250_ev1_free(i2c);
+ return ret;
+ }
+
+ return 0;
}
static int __devexit wm1250_ev1_remove(struct i2c_client *i2c)
{
snd_soc_unregister_codec(&i2c->dev);
+ wm1250_ev1_free(i2c);
return 0;
}
diff --git a/sound/soc/codecs/wm5100-tables.c b/sound/soc/codecs/wm5100-tables.c
new file mode 100644
index 0000000..e9ce81a
--- /dev/null
+++ b/sound/soc/codecs/wm5100-tables.c
@@ -0,0 +1,1531 @@
+/*
+ * wm5100-tables.c -- WM5100 ALSA SoC Audio driver data
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "wm5100.h"
+
+int wm5100_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
+{
+ switch (reg) {
+ case WM5100_SOFTWARE_RESET:
+ case WM5100_DEVICE_REVISION:
+ case WM5100_FX_CTRL:
+ case WM5100_INTERRUPT_STATUS_1:
+ case WM5100_INTERRUPT_STATUS_2:
+ case WM5100_INTERRUPT_STATUS_3:
+ case WM5100_INTERRUPT_STATUS_4:
+ case WM5100_INTERRUPT_RAW_STATUS_2:
+ case WM5100_INTERRUPT_RAW_STATUS_3:
+ case WM5100_INTERRUPT_RAW_STATUS_4:
+ case WM5100_OUTPUT_STATUS_1:
+ case WM5100_OUTPUT_STATUS_2:
+ case WM5100_INPUT_ENABLES_STATUS:
+ case WM5100_MIC_DETECT_3:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+int wm5100_readable_register(struct snd_soc_codec *codec, unsigned int reg)
+{
+ switch (reg) {
+ case WM5100_SOFTWARE_RESET:
+ case WM5100_DEVICE_REVISION:
+ case WM5100_CTRL_IF_1:
+ case WM5100_TONE_GENERATOR_1:
+ case WM5100_PWM_DRIVE_1:
+ case WM5100_PWM_DRIVE_2:
+ case WM5100_PWM_DRIVE_3:
+ case WM5100_CLOCKING_1:
+ case WM5100_CLOCKING_3:
+ case WM5100_CLOCKING_4:
+ case WM5100_CLOCKING_5:
+ case WM5100_CLOCKING_6:
+ case WM5100_CLOCKING_7:
+ case WM5100_CLOCKING_8:
+ case WM5100_ASRC_ENABLE:
+ case WM5100_ASRC_STATUS:
+ case WM5100_ASRC_RATE1:
+ case WM5100_ISRC_1_CTRL_1:
+ case WM5100_ISRC_1_CTRL_2:
+ case WM5100_ISRC_2_CTRL1:
+ case WM5100_ISRC_2_CTRL_2:
+ case WM5100_FLL1_CONTROL_1:
+ case WM5100_FLL1_CONTROL_2:
+ case WM5100_FLL1_CONTROL_3:
+ case WM5100_FLL1_CONTROL_5:
+ case WM5100_FLL1_CONTROL_6:
+ case WM5100_FLL1_EFS_1:
+ case WM5100_FLL2_CONTROL_1:
+ case WM5100_FLL2_CONTROL_2:
+ case WM5100_FLL2_CONTROL_3:
+ case WM5100_FLL2_CONTROL_5:
+ case WM5100_FLL2_CONTROL_6:
+ case WM5100_FLL2_EFS_1:
+ case WM5100_MIC_CHARGE_PUMP_1:
+ case WM5100_MIC_CHARGE_PUMP_2:
+ case WM5100_HP_CHARGE_PUMP_1:
+ case WM5100_LDO1_CONTROL:
+ case WM5100_MIC_BIAS_CTRL_1:
+ case WM5100_MIC_BIAS_CTRL_2:
+ case WM5100_MIC_BIAS_CTRL_3:
+ case WM5100_ACCESSORY_DETECT_MODE_1:
+ case WM5100_HEADPHONE_DETECT_1:
+ case WM5100_HEADPHONE_DETECT_2:
+ case WM5100_MIC_DETECT_1:
+ case WM5100_MIC_DETECT_2:
+ case WM5100_MIC_DETECT_3:
+ case WM5100_INPUT_ENABLES:
+ case WM5100_INPUT_ENABLES_STATUS:
+ case WM5100_IN1L_CONTROL:
+ case WM5100_IN1R_CONTROL:
+ case WM5100_IN2L_CONTROL:
+ case WM5100_IN2R_CONTROL:
+ case WM5100_IN3L_CONTROL:
+ case WM5100_IN3R_CONTROL:
+ case WM5100_IN4L_CONTROL:
+ case WM5100_IN4R_CONTROL:
+ case WM5100_RXANC_SRC:
+ case WM5100_INPUT_VOLUME_RAMP:
+ case WM5100_ADC_DIGITAL_VOLUME_1L:
+ case WM5100_ADC_DIGITAL_VOLUME_1R:
+ case WM5100_ADC_DIGITAL_VOLUME_2L:
+ case WM5100_ADC_DIGITAL_VOLUME_2R:
+ case WM5100_ADC_DIGITAL_VOLUME_3L:
+ case WM5100_ADC_DIGITAL_VOLUME_3R:
+ case WM5100_ADC_DIGITAL_VOLUME_4L:
+ case WM5100_ADC_DIGITAL_VOLUME_4R:
+ case WM5100_OUTPUT_ENABLES_2:
+ case WM5100_OUTPUT_STATUS_1:
+ case WM5100_OUTPUT_STATUS_2:
+ case WM5100_CHANNEL_ENABLES_1:
+ case WM5100_OUT_VOLUME_1L:
+ case WM5100_OUT_VOLUME_1R:
+ case WM5100_DAC_VOLUME_LIMIT_1L:
+ case WM5100_DAC_VOLUME_LIMIT_1R:
+ case WM5100_OUT_VOLUME_2L:
+ case WM5100_OUT_VOLUME_2R:
+ case WM5100_DAC_VOLUME_LIMIT_2L:
+ case WM5100_DAC_VOLUME_LIMIT_2R:
+ case WM5100_OUT_VOLUME_3L:
+ case WM5100_OUT_VOLUME_3R:
+ case WM5100_DAC_VOLUME_LIMIT_3L:
+ case WM5100_DAC_VOLUME_LIMIT_3R:
+ case WM5100_OUT_VOLUME_4L:
+ case WM5100_OUT_VOLUME_4R:
+ case WM5100_DAC_VOLUME_LIMIT_5L:
+ case WM5100_DAC_VOLUME_LIMIT_5R:
+ case WM5100_DAC_VOLUME_LIMIT_6L:
+ case WM5100_DAC_VOLUME_LIMIT_6R:
+ case WM5100_DAC_AEC_CONTROL_1:
+ case WM5100_OUTPUT_VOLUME_RAMP:
+ case WM5100_DAC_DIGITAL_VOLUME_1L:
+ case WM5100_DAC_DIGITAL_VOLUME_1R:
+ case WM5100_DAC_DIGITAL_VOLUME_2L:
+ case WM5100_DAC_DIGITAL_VOLUME_2R:
+ case WM5100_DAC_DIGITAL_VOLUME_3L:
+ case WM5100_DAC_DIGITAL_VOLUME_3R:
+ case WM5100_DAC_DIGITAL_VOLUME_4L:
+ case WM5100_DAC_DIGITAL_VOLUME_4R:
+ case WM5100_DAC_DIGITAL_VOLUME_5L:
+ case WM5100_DAC_DIGITAL_VOLUME_5R:
+ case WM5100_DAC_DIGITAL_VOLUME_6L:
+ case WM5100_DAC_DIGITAL_VOLUME_6R:
+ case WM5100_PDM_SPK1_CTRL_1:
+ case WM5100_PDM_SPK1_CTRL_2:
+ case WM5100_PDM_SPK2_CTRL_1:
+ case WM5100_PDM_SPK2_CTRL_2:
+ case WM5100_AUDIO_IF_1_1:
+ case WM5100_AUDIO_IF_1_2:
+ case WM5100_AUDIO_IF_1_3:
+ case WM5100_AUDIO_IF_1_4:
+ case WM5100_AUDIO_IF_1_5:
+ case WM5100_AUDIO_IF_1_6:
+ case WM5100_AUDIO_IF_1_7:
+ case WM5100_AUDIO_IF_1_8:
+ case WM5100_AUDIO_IF_1_9:
+ case WM5100_AUDIO_IF_1_10:
+ case WM5100_AUDIO_IF_1_11:
+ case WM5100_AUDIO_IF_1_12:
+ case WM5100_AUDIO_IF_1_13:
+ case WM5100_AUDIO_IF_1_14:
+ case WM5100_AUDIO_IF_1_15:
+ case WM5100_AUDIO_IF_1_16:
+ case WM5100_AUDIO_IF_1_17:
+ case WM5100_AUDIO_IF_1_18:
+ case WM5100_AUDIO_IF_1_19:
+ case WM5100_AUDIO_IF_1_20:
+ case WM5100_AUDIO_IF_1_21:
+ case WM5100_AUDIO_IF_1_22:
+ case WM5100_AUDIO_IF_1_23:
+ case WM5100_AUDIO_IF_1_24:
+ case WM5100_AUDIO_IF_1_25:
+ case WM5100_AUDIO_IF_1_26:
+ case WM5100_AUDIO_IF_1_27:
+ case WM5100_AUDIO_IF_2_1:
+ case WM5100_AUDIO_IF_2_2:
+ case WM5100_AUDIO_IF_2_3:
+ case WM5100_AUDIO_IF_2_4:
+ case WM5100_AUDIO_IF_2_5:
+ case WM5100_AUDIO_IF_2_6:
+ case WM5100_AUDIO_IF_2_7:
+ case WM5100_AUDIO_IF_2_8:
+ case WM5100_AUDIO_IF_2_9:
+ case WM5100_AUDIO_IF_2_10:
+ case WM5100_AUDIO_IF_2_11:
+ case WM5100_AUDIO_IF_2_18:
+ case WM5100_AUDIO_IF_2_19:
+ case WM5100_AUDIO_IF_2_26:
+ case WM5100_AUDIO_IF_2_27:
+ case WM5100_AUDIO_IF_3_1:
+ case WM5100_AUDIO_IF_3_2:
+ case WM5100_AUDIO_IF_3_3:
+ case WM5100_AUDIO_IF_3_4:
+ case WM5100_AUDIO_IF_3_5:
+ case WM5100_AUDIO_IF_3_6:
+ case WM5100_AUDIO_IF_3_7:
+ case WM5100_AUDIO_IF_3_8:
+ case WM5100_AUDIO_IF_3_9:
+ case WM5100_AUDIO_IF_3_10:
+ case WM5100_AUDIO_IF_3_11:
+ case WM5100_AUDIO_IF_3_18:
+ case WM5100_AUDIO_IF_3_19:
+ case WM5100_AUDIO_IF_3_26:
+ case WM5100_AUDIO_IF_3_27:
+ case WM5100_PWM1MIX_INPUT_1_SOURCE:
+ case WM5100_PWM1MIX_INPUT_1_VOLUME:
+ case WM5100_PWM1MIX_INPUT_2_SOURCE:
+ case WM5100_PWM1MIX_INPUT_2_VOLUME:
+ case WM5100_PWM1MIX_INPUT_3_SOURCE:
+ case WM5100_PWM1MIX_INPUT_3_VOLUME:
+ case WM5100_PWM1MIX_INPUT_4_SOURCE:
+ case WM5100_PWM1MIX_INPUT_4_VOLUME:
+ case WM5100_PWM2MIX_INPUT_1_SOURCE:
+ case WM5100_PWM2MIX_INPUT_1_VOLUME:
+ case WM5100_PWM2MIX_INPUT_2_SOURCE:
+ case WM5100_PWM2MIX_INPUT_2_VOLUME:
+ case WM5100_PWM2MIX_INPUT_3_SOURCE:
+ case WM5100_PWM2MIX_INPUT_3_VOLUME:
+ case WM5100_PWM2MIX_INPUT_4_SOURCE:
+ case WM5100_PWM2MIX_INPUT_4_VOLUME:
+ case WM5100_OUT1LMIX_INPUT_1_SOURCE:
+ case WM5100_OUT1LMIX_INPUT_1_VOLUME:
+ case WM5100_OUT1LMIX_INPUT_2_SOURCE:
+ case WM5100_OUT1LMIX_INPUT_2_VOLUME:
+ case WM5100_OUT1LMIX_INPUT_3_SOURCE:
+ case WM5100_OUT1LMIX_INPUT_3_VOLUME:
+ case WM5100_OUT1LMIX_INPUT_4_SOURCE:
+ case WM5100_OUT1LMIX_INPUT_4_VOLUME:
+ case WM5100_OUT1RMIX_INPUT_1_SOURCE:
+ case WM5100_OUT1RMIX_INPUT_1_VOLUME:
+ case WM5100_OUT1RMIX_INPUT_2_SOURCE:
+ case WM5100_OUT1RMIX_INPUT_2_VOLUME:
+ case WM5100_OUT1RMIX_INPUT_3_SOURCE:
+ case WM5100_OUT1RMIX_INPUT_3_VOLUME:
+ case WM5100_OUT1RMIX_INPUT_4_SOURCE:
+ case WM5100_OUT1RMIX_INPUT_4_VOLUME:
+ case WM5100_OUT2LMIX_INPUT_1_SOURCE:
+ case WM5100_OUT2LMIX_INPUT_1_VOLUME:
+ case WM5100_OUT2LMIX_INPUT_2_SOURCE:
+ case WM5100_OUT2LMIX_INPUT_2_VOLUME:
+ case WM5100_OUT2LMIX_INPUT_3_SOURCE:
+ case WM5100_OUT2LMIX_INPUT_3_VOLUME:
+ case WM5100_OUT2LMIX_INPUT_4_SOURCE:
+ case WM5100_OUT2LMIX_INPUT_4_VOLUME:
+ case WM5100_OUT2RMIX_INPUT_1_SOURCE:
+ case WM5100_OUT2RMIX_INPUT_1_VOLUME:
+ case WM5100_OUT2RMIX_INPUT_2_SOURCE:
+ case WM5100_OUT2RMIX_INPUT_2_VOLUME:
+ case WM5100_OUT2RMIX_INPUT_3_SOURCE:
+ case WM5100_OUT2RMIX_INPUT_3_VOLUME:
+ case WM5100_OUT2RMIX_INPUT_4_SOURCE:
+ case WM5100_OUT2RMIX_INPUT_4_VOLUME:
+ case WM5100_OUT3LMIX_INPUT_1_SOURCE:
+ case WM5100_OUT3LMIX_INPUT_1_VOLUME:
+ case WM5100_OUT3LMIX_INPUT_2_SOURCE:
+ case WM5100_OUT3LMIX_INPUT_2_VOLUME:
+ case WM5100_OUT3LMIX_INPUT_3_SOURCE:
+ case WM5100_OUT3LMIX_INPUT_3_VOLUME:
+ case WM5100_OUT3LMIX_INPUT_4_SOURCE:
+ case WM5100_OUT3LMIX_INPUT_4_VOLUME:
+ case WM5100_OUT3RMIX_INPUT_1_SOURCE:
+ case WM5100_OUT3RMIX_INPUT_1_VOLUME:
+ case WM5100_OUT3RMIX_INPUT_2_SOURCE:
+ case WM5100_OUT3RMIX_INPUT_2_VOLUME:
+ case WM5100_OUT3RMIX_INPUT_3_SOURCE:
+ case WM5100_OUT3RMIX_INPUT_3_VOLUME:
+ case WM5100_OUT3RMIX_INPUT_4_SOURCE:
+ case WM5100_OUT3RMIX_INPUT_4_VOLUME:
+ case WM5100_OUT4LMIX_INPUT_1_SOURCE:
+ case WM5100_OUT4LMIX_INPUT_1_VOLUME:
+ case WM5100_OUT4LMIX_INPUT_2_SOURCE:
+ case WM5100_OUT4LMIX_INPUT_2_VOLUME:
+ case WM5100_OUT4LMIX_INPUT_3_SOURCE:
+ case WM5100_OUT4LMIX_INPUT_3_VOLUME:
+ case WM5100_OUT4LMIX_INPUT_4_SOURCE:
+ case WM5100_OUT4LMIX_INPUT_4_VOLUME:
+ case WM5100_OUT4RMIX_INPUT_1_SOURCE:
+ case WM5100_OUT4RMIX_INPUT_1_VOLUME:
+ case WM5100_OUT4RMIX_INPUT_2_SOURCE:
+ case WM5100_OUT4RMIX_INPUT_2_VOLUME:
+ case WM5100_OUT4RMIX_INPUT_3_SOURCE:
+ case WM5100_OUT4RMIX_INPUT_3_VOLUME:
+ case WM5100_OUT4RMIX_INPUT_4_SOURCE:
+ case WM5100_OUT4RMIX_INPUT_4_VOLUME:
+ case WM5100_OUT5LMIX_INPUT_1_SOURCE:
+ case WM5100_OUT5LMIX_INPUT_1_VOLUME:
+ case WM5100_OUT5LMIX_INPUT_2_SOURCE:
+ case WM5100_OUT5LMIX_INPUT_2_VOLUME:
+ case WM5100_OUT5LMIX_INPUT_3_SOURCE:
+ case WM5100_OUT5LMIX_INPUT_3_VOLUME:
+ case WM5100_OUT5LMIX_INPUT_4_SOURCE:
+ case WM5100_OUT5LMIX_INPUT_4_VOLUME:
+ case WM5100_OUT5RMIX_INPUT_1_SOURCE:
+ case WM5100_OUT5RMIX_INPUT_1_VOLUME:
+ case WM5100_OUT5RMIX_INPUT_2_SOURCE:
+ case WM5100_OUT5RMIX_INPUT_2_VOLUME:
+ case WM5100_OUT5RMIX_INPUT_3_SOURCE:
+ case WM5100_OUT5RMIX_INPUT_3_VOLUME:
+ case WM5100_OUT5RMIX_INPUT_4_SOURCE:
+ case WM5100_OUT5RMIX_INPUT_4_VOLUME:
+ case WM5100_OUT6LMIX_INPUT_1_SOURCE:
+ case WM5100_OUT6LMIX_INPUT_1_VOLUME:
+ case WM5100_OUT6LMIX_INPUT_2_SOURCE:
+ case WM5100_OUT6LMIX_INPUT_2_VOLUME:
+ case WM5100_OUT6LMIX_INPUT_3_SOURCE:
+ case WM5100_OUT6LMIX_INPUT_3_VOLUME:
+ case WM5100_OUT6LMIX_INPUT_4_SOURCE:
+ case WM5100_OUT6LMIX_INPUT_4_VOLUME:
+ case WM5100_OUT6RMIX_INPUT_1_SOURCE:
+ case WM5100_OUT6RMIX_INPUT_1_VOLUME:
+ case WM5100_OUT6RMIX_INPUT_2_SOURCE:
+ case WM5100_OUT6RMIX_INPUT_2_VOLUME:
+ case WM5100_OUT6RMIX_INPUT_3_SOURCE:
+ case WM5100_OUT6RMIX_INPUT_3_VOLUME:
+ case WM5100_OUT6RMIX_INPUT_4_SOURCE:
+ case WM5100_OUT6RMIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX1MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX1MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX1MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX1MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX1MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX1MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX1MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX1MIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX2MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX2MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX2MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX2MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX2MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX2MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX2MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX2MIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX3MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX3MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX3MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX3MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX3MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX3MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX3MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX3MIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX4MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX4MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX4MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX4MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX4MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX4MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX4MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX4MIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX5MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX5MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX5MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX5MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX5MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX5MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX5MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX5MIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX6MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX6MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX6MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX6MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX6MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX6MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX6MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX6MIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX7MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX7MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX7MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX7MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX7MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX7MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX7MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX7MIX_INPUT_4_VOLUME:
+ case WM5100_AIF1TX8MIX_INPUT_1_SOURCE:
+ case WM5100_AIF1TX8MIX_INPUT_1_VOLUME:
+ case WM5100_AIF1TX8MIX_INPUT_2_SOURCE:
+ case WM5100_AIF1TX8MIX_INPUT_2_VOLUME:
+ case WM5100_AIF1TX8MIX_INPUT_3_SOURCE:
+ case WM5100_AIF1TX8MIX_INPUT_3_VOLUME:
+ case WM5100_AIF1TX8MIX_INPUT_4_SOURCE:
+ case WM5100_AIF1TX8MIX_INPUT_4_VOLUME:
+ case WM5100_AIF2TX1MIX_INPUT_1_SOURCE:
+ case WM5100_AIF2TX1MIX_INPUT_1_VOLUME:
+ case WM5100_AIF2TX1MIX_INPUT_2_SOURCE:
+ case WM5100_AIF2TX1MIX_INPUT_2_VOLUME:
+ case WM5100_AIF2TX1MIX_INPUT_3_SOURCE:
+ case WM5100_AIF2TX1MIX_INPUT_3_VOLUME:
+ case WM5100_AIF2TX1MIX_INPUT_4_SOURCE:
+ case WM5100_AIF2TX1MIX_INPUT_4_VOLUME:
+ case WM5100_AIF2TX2MIX_INPUT_1_SOURCE:
+ case WM5100_AIF2TX2MIX_INPUT_1_VOLUME:
+ case WM5100_AIF2TX2MIX_INPUT_2_SOURCE:
+ case WM5100_AIF2TX2MIX_INPUT_2_VOLUME:
+ case WM5100_AIF2TX2MIX_INPUT_3_SOURCE:
+ case WM5100_AIF2TX2MIX_INPUT_3_VOLUME:
+ case WM5100_AIF2TX2MIX_INPUT_4_SOURCE:
+ case WM5100_AIF2TX2MIX_INPUT_4_VOLUME:
+ case WM5100_AIF3TX1MIX_INPUT_1_SOURCE:
+ case WM5100_AIF3TX1MIX_INPUT_1_VOLUME:
+ case WM5100_AIF3TX1MIX_INPUT_2_SOURCE:
+ case WM5100_AIF3TX1MIX_INPUT_2_VOLUME:
+ case WM5100_AIF3TX1MIX_INPUT_3_SOURCE:
+ case WM5100_AIF3TX1MIX_INPUT_3_VOLUME:
+ case WM5100_AIF3TX1MIX_INPUT_4_SOURCE:
+ case WM5100_AIF3TX1MIX_INPUT_4_VOLUME:
+ case WM5100_AIF3TX2MIX_INPUT_1_SOURCE:
+ case WM5100_AIF3TX2MIX_INPUT_1_VOLUME:
+ case WM5100_AIF3TX2MIX_INPUT_2_SOURCE:
+ case WM5100_AIF3TX2MIX_INPUT_2_VOLUME:
+ case WM5100_AIF3TX2MIX_INPUT_3_SOURCE:
+ case WM5100_AIF3TX2MIX_INPUT_3_VOLUME:
+ case WM5100_AIF3TX2MIX_INPUT_4_SOURCE:
+ case WM5100_AIF3TX2MIX_INPUT_4_VOLUME:
+ case WM5100_EQ1MIX_INPUT_1_SOURCE:
+ case WM5100_EQ1MIX_INPUT_1_VOLUME:
+ case WM5100_EQ1MIX_INPUT_2_SOURCE:
+ case WM5100_EQ1MIX_INPUT_2_VOLUME:
+ case WM5100_EQ1MIX_INPUT_3_SOURCE:
+ case WM5100_EQ1MIX_INPUT_3_VOLUME:
+ case WM5100_EQ1MIX_INPUT_4_SOURCE:
+ case WM5100_EQ1MIX_INPUT_4_VOLUME:
+ case WM5100_EQ2MIX_INPUT_1_SOURCE:
+ case WM5100_EQ2MIX_INPUT_1_VOLUME:
+ case WM5100_EQ2MIX_INPUT_2_SOURCE:
+ case WM5100_EQ2MIX_INPUT_2_VOLUME:
+ case WM5100_EQ2MIX_INPUT_3_SOURCE:
+ case WM5100_EQ2MIX_INPUT_3_VOLUME:
+ case WM5100_EQ2MIX_INPUT_4_SOURCE:
+ case WM5100_EQ2MIX_INPUT_4_VOLUME:
+ case WM5100_EQ3MIX_INPUT_1_SOURCE:
+ case WM5100_EQ3MIX_INPUT_1_VOLUME:
+ case WM5100_EQ3MIX_INPUT_2_SOURCE:
+ case WM5100_EQ3MIX_INPUT_2_VOLUME:
+ case WM5100_EQ3MIX_INPUT_3_SOURCE:
+ case WM5100_EQ3MIX_INPUT_3_VOLUME:
+ case WM5100_EQ3MIX_INPUT_4_SOURCE:
+ case WM5100_EQ3MIX_INPUT_4_VOLUME:
+ case WM5100_EQ4MIX_INPUT_1_SOURCE:
+ case WM5100_EQ4MIX_INPUT_1_VOLUME:
+ case WM5100_EQ4MIX_INPUT_2_SOURCE:
+ case WM5100_EQ4MIX_INPUT_2_VOLUME:
+ case WM5100_EQ4MIX_INPUT_3_SOURCE:
+ case WM5100_EQ4MIX_INPUT_3_VOLUME:
+ case WM5100_EQ4MIX_INPUT_4_SOURCE:
+ case WM5100_EQ4MIX_INPUT_4_VOLUME:
+ case WM5100_DRC1LMIX_INPUT_1_SOURCE:
+ case WM5100_DRC1LMIX_INPUT_1_VOLUME:
+ case WM5100_DRC1LMIX_INPUT_2_SOURCE:
+ case WM5100_DRC1LMIX_INPUT_2_VOLUME:
+ case WM5100_DRC1LMIX_INPUT_3_SOURCE:
+ case WM5100_DRC1LMIX_INPUT_3_VOLUME:
+ case WM5100_DRC1LMIX_INPUT_4_SOURCE:
+ case WM5100_DRC1LMIX_INPUT_4_VOLUME:
+ case WM5100_DRC1RMIX_INPUT_1_SOURCE:
+ case WM5100_DRC1RMIX_INPUT_1_VOLUME:
+ case WM5100_DRC1RMIX_INPUT_2_SOURCE:
+ case WM5100_DRC1RMIX_INPUT_2_VOLUME:
+ case WM5100_DRC1RMIX_INPUT_3_SOURCE:
+ case WM5100_DRC1RMIX_INPUT_3_VOLUME:
+ case WM5100_DRC1RMIX_INPUT_4_SOURCE:
+ case WM5100_DRC1RMIX_INPUT_4_VOLUME:
+ case WM5100_HPLP1MIX_INPUT_1_SOURCE:
+ case WM5100_HPLP1MIX_INPUT_1_VOLUME:
+ case WM5100_HPLP1MIX_INPUT_2_SOURCE:
+ case WM5100_HPLP1MIX_INPUT_2_VOLUME:
+ case WM5100_HPLP1MIX_INPUT_3_SOURCE:
+ case WM5100_HPLP1MIX_INPUT_3_VOLUME:
+ case WM5100_HPLP1MIX_INPUT_4_SOURCE:
+ case WM5100_HPLP1MIX_INPUT_4_VOLUME:
+ case WM5100_HPLP2MIX_INPUT_1_SOURCE:
+ case WM5100_HPLP2MIX_INPUT_1_VOLUME:
+ case WM5100_HPLP2MIX_INPUT_2_SOURCE:
+ case WM5100_HPLP2MIX_INPUT_2_VOLUME:
+ case WM5100_HPLP2MIX_INPUT_3_SOURCE:
+ case WM5100_HPLP2MIX_INPUT_3_VOLUME:
+ case WM5100_HPLP2MIX_INPUT_4_SOURCE:
+ case WM5100_HPLP2MIX_INPUT_4_VOLUME:
+ case WM5100_HPLP3MIX_INPUT_1_SOURCE:
+ case WM5100_HPLP3MIX_INPUT_1_VOLUME:
+ case WM5100_HPLP3MIX_INPUT_2_SOURCE:
+ case WM5100_HPLP3MIX_INPUT_2_VOLUME:
+ case WM5100_HPLP3MIX_INPUT_3_SOURCE:
+ case WM5100_HPLP3MIX_INPUT_3_VOLUME:
+ case WM5100_HPLP3MIX_INPUT_4_SOURCE:
+ case WM5100_HPLP3MIX_INPUT_4_VOLUME:
+ case WM5100_HPLP4MIX_INPUT_1_SOURCE:
+ case WM5100_HPLP4MIX_INPUT_1_VOLUME:
+ case WM5100_HPLP4MIX_INPUT_2_SOURCE:
+ case WM5100_HPLP4MIX_INPUT_2_VOLUME:
+ case WM5100_HPLP4MIX_INPUT_3_SOURCE:
+ case WM5100_HPLP4MIX_INPUT_3_VOLUME:
+ case WM5100_HPLP4MIX_INPUT_4_SOURCE:
+ case WM5100_HPLP4MIX_INPUT_4_VOLUME:
+ case WM5100_DSP1LMIX_INPUT_1_SOURCE:
+ case WM5100_DSP1LMIX_INPUT_1_VOLUME:
+ case WM5100_DSP1LMIX_INPUT_2_SOURCE:
+ case WM5100_DSP1LMIX_INPUT_2_VOLUME:
+ case WM5100_DSP1LMIX_INPUT_3_SOURCE:
+ case WM5100_DSP1LMIX_INPUT_3_VOLUME:
+ case WM5100_DSP1LMIX_INPUT_4_SOURCE:
+ case WM5100_DSP1LMIX_INPUT_4_VOLUME:
+ case WM5100_DSP1RMIX_INPUT_1_SOURCE:
+ case WM5100_DSP1RMIX_INPUT_1_VOLUME:
+ case WM5100_DSP1RMIX_INPUT_2_SOURCE:
+ case WM5100_DSP1RMIX_INPUT_2_VOLUME:
+ case WM5100_DSP1RMIX_INPUT_3_SOURCE:
+ case WM5100_DSP1RMIX_INPUT_3_VOLUME:
+ case WM5100_DSP1RMIX_INPUT_4_SOURCE:
+ case WM5100_DSP1RMIX_INPUT_4_VOLUME:
+ case WM5100_DSP1AUX1MIX_INPUT_1_SOURCE:
+ case WM5100_DSP1AUX2MIX_INPUT_1_SOURCE:
+ case WM5100_DSP1AUX3MIX_INPUT_1_SOURCE:
+ case WM5100_DSP1AUX4MIX_INPUT_1_SOURCE:
+ case WM5100_DSP1AUX5MIX_INPUT_1_SOURCE:
+ case WM5100_DSP1AUX6MIX_INPUT_1_SOURCE:
+ case WM5100_DSP2LMIX_INPUT_1_SOURCE:
+ case WM5100_DSP2LMIX_INPUT_1_VOLUME:
+ case WM5100_DSP2LMIX_INPUT_2_SOURCE:
+ case WM5100_DSP2LMIX_INPUT_2_VOLUME:
+ case WM5100_DSP2LMIX_INPUT_3_SOURCE:
+ case WM5100_DSP2LMIX_INPUT_3_VOLUME:
+ case WM5100_DSP2LMIX_INPUT_4_SOURCE:
+ case WM5100_DSP2LMIX_INPUT_4_VOLUME:
+ case WM5100_DSP2RMIX_INPUT_1_SOURCE:
+ case WM5100_DSP2RMIX_INPUT_1_VOLUME:
+ case WM5100_DSP2RMIX_INPUT_2_SOURCE:
+ case WM5100_DSP2RMIX_INPUT_2_VOLUME:
+ case WM5100_DSP2RMIX_INPUT_3_SOURCE:
+ case WM5100_DSP2RMIX_INPUT_3_VOLUME:
+ case WM5100_DSP2RMIX_INPUT_4_SOURCE:
+ case WM5100_DSP2RMIX_INPUT_4_VOLUME:
+ case WM5100_DSP2AUX1MIX_INPUT_1_SOURCE:
+ case WM5100_DSP2AUX2MIX_INPUT_1_SOURCE:
+ case WM5100_DSP2AUX3MIX_INPUT_1_SOURCE:
+ case WM5100_DSP2AUX4MIX_INPUT_1_SOURCE:
+ case WM5100_DSP2AUX5MIX_INPUT_1_SOURCE:
+ case WM5100_DSP2AUX6MIX_INPUT_1_SOURCE:
+ case WM5100_DSP3LMIX_INPUT_1_SOURCE:
+ case WM5100_DSP3LMIX_INPUT_1_VOLUME:
+ case WM5100_DSP3LMIX_INPUT_2_SOURCE:
+ case WM5100_DSP3LMIX_INPUT_2_VOLUME:
+ case WM5100_DSP3LMIX_INPUT_3_SOURCE:
+ case WM5100_DSP3LMIX_INPUT_3_VOLUME:
+ case WM5100_DSP3LMIX_INPUT_4_SOURCE:
+ case WM5100_DSP3LMIX_INPUT_4_VOLUME:
+ case WM5100_DSP3RMIX_INPUT_1_SOURCE:
+ case WM5100_DSP3RMIX_INPUT_1_VOLUME:
+ case WM5100_DSP3RMIX_INPUT_2_SOURCE:
+ case WM5100_DSP3RMIX_INPUT_2_VOLUME:
+ case WM5100_DSP3RMIX_INPUT_3_SOURCE:
+ case WM5100_DSP3RMIX_INPUT_3_VOLUME:
+ case WM5100_DSP3RMIX_INPUT_4_SOURCE:
+ case WM5100_DSP3RMIX_INPUT_4_VOLUME:
+ case WM5100_DSP3AUX1MIX_INPUT_1_SOURCE:
+ case WM5100_DSP3AUX2MIX_INPUT_1_SOURCE:
+ case WM5100_DSP3AUX3MIX_INPUT_1_SOURCE:
+ case WM5100_DSP3AUX4MIX_INPUT_1_SOURCE:
+ case WM5100_DSP3AUX5MIX_INPUT_1_SOURCE:
+ case WM5100_DSP3AUX6MIX_INPUT_1_SOURCE:
+ case WM5100_ASRC1LMIX_INPUT_1_SOURCE:
+ case WM5100_ASRC1RMIX_INPUT_1_SOURCE:
+ case WM5100_ASRC2LMIX_INPUT_1_SOURCE:
+ case WM5100_ASRC2RMIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1DEC1MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1DEC2MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1DEC3MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1DEC4MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1INT1MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1INT2MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1INT3MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC1INT4MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2DEC1MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2DEC2MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2DEC3MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2DEC4MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2INT1MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2INT2MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2INT3MIX_INPUT_1_SOURCE:
+ case WM5100_ISRC2INT4MIX_INPUT_1_SOURCE:
+ case WM5100_GPIO_CTRL_1:
+ case WM5100_GPIO_CTRL_2:
+ case WM5100_GPIO_CTRL_3:
+ case WM5100_GPIO_CTRL_4:
+ case WM5100_GPIO_CTRL_5:
+ case WM5100_GPIO_CTRL_6:
+ case WM5100_MISC_PAD_CTRL_1:
+ case WM5100_MISC_PAD_CTRL_2:
+ case WM5100_MISC_PAD_CTRL_3:
+ case WM5100_MISC_PAD_CTRL_4:
+ case WM5100_MISC_PAD_CTRL_5:
+ case WM5100_MISC_GPIO_1:
+ case WM5100_INTERRUPT_STATUS_1:
+ case WM5100_INTERRUPT_STATUS_2:
+ case WM5100_INTERRUPT_STATUS_3:
+ case WM5100_INTERRUPT_STATUS_4:
+ case WM5100_INTERRUPT_RAW_STATUS_2:
+ case WM5100_INTERRUPT_RAW_STATUS_3:
+ case WM5100_INTERRUPT_RAW_STATUS_4:
+ case WM5100_INTERRUPT_STATUS_1_MASK:
+ case WM5100_INTERRUPT_STATUS_2_MASK:
+ case WM5100_INTERRUPT_STATUS_3_MASK:
+ case WM5100_INTERRUPT_STATUS_4_MASK:
+ case WM5100_INTERRUPT_CONTROL:
+ case WM5100_IRQ_DEBOUNCE_1:
+ case WM5100_IRQ_DEBOUNCE_2:
+ case WM5100_FX_CTRL:
+ case WM5100_EQ1_1:
+ case WM5100_EQ1_2:
+ case WM5100_EQ1_3:
+ case WM5100_EQ1_4:
+ case WM5100_EQ1_5:
+ case WM5100_EQ1_6:
+ case WM5100_EQ1_7:
+ case WM5100_EQ1_8:
+ case WM5100_EQ1_9:
+ case WM5100_EQ1_10:
+ case WM5100_EQ1_11:
+ case WM5100_EQ1_12:
+ case WM5100_EQ1_13:
+ case WM5100_EQ1_14:
+ case WM5100_EQ1_15:
+ case WM5100_EQ1_16:
+ case WM5100_EQ1_17:
+ case WM5100_EQ1_18:
+ case WM5100_EQ1_19:
+ case WM5100_EQ1_20:
+ case WM5100_EQ2_1:
+ case WM5100_EQ2_2:
+ case WM5100_EQ2_3:
+ case WM5100_EQ2_4:
+ case WM5100_EQ2_5:
+ case WM5100_EQ2_6:
+ case WM5100_EQ2_7:
+ case WM5100_EQ2_8:
+ case WM5100_EQ2_9:
+ case WM5100_EQ2_10:
+ case WM5100_EQ2_11:
+ case WM5100_EQ2_12:
+ case WM5100_EQ2_13:
+ case WM5100_EQ2_14:
+ case WM5100_EQ2_15:
+ case WM5100_EQ2_16:
+ case WM5100_EQ2_17:
+ case WM5100_EQ2_18:
+ case WM5100_EQ2_19:
+ case WM5100_EQ2_20:
+ case WM5100_EQ3_1:
+ case WM5100_EQ3_2:
+ case WM5100_EQ3_3:
+ case WM5100_EQ3_4:
+ case WM5100_EQ3_5:
+ case WM5100_EQ3_6:
+ case WM5100_EQ3_7:
+ case WM5100_EQ3_8:
+ case WM5100_EQ3_9:
+ case WM5100_EQ3_10:
+ case WM5100_EQ3_11:
+ case WM5100_EQ3_12:
+ case WM5100_EQ3_13:
+ case WM5100_EQ3_14:
+ case WM5100_EQ3_15:
+ case WM5100_EQ3_16:
+ case WM5100_EQ3_17:
+ case WM5100_EQ3_18:
+ case WM5100_EQ3_19:
+ case WM5100_EQ3_20:
+ case WM5100_EQ4_1:
+ case WM5100_EQ4_2:
+ case WM5100_EQ4_3:
+ case WM5100_EQ4_4:
+ case WM5100_EQ4_5:
+ case WM5100_EQ4_6:
+ case WM5100_EQ4_7:
+ case WM5100_EQ4_8:
+ case WM5100_EQ4_9:
+ case WM5100_EQ4_10:
+ case WM5100_EQ4_11:
+ case WM5100_EQ4_12:
+ case WM5100_EQ4_13:
+ case WM5100_EQ4_14:
+ case WM5100_EQ4_15:
+ case WM5100_EQ4_16:
+ case WM5100_EQ4_17:
+ case WM5100_EQ4_18:
+ case WM5100_EQ4_19:
+ case WM5100_EQ4_20:
+ case WM5100_DRC1_CTRL1:
+ case WM5100_DRC1_CTRL2:
+ case WM5100_DRC1_CTRL3:
+ case WM5100_DRC1_CTRL4:
+ case WM5100_DRC1_CTRL5:
+ case WM5100_HPLPF1_1:
+ case WM5100_HPLPF1_2:
+ case WM5100_HPLPF2_1:
+ case WM5100_HPLPF2_2:
+ case WM5100_HPLPF3_1:
+ case WM5100_HPLPF3_2:
+ case WM5100_HPLPF4_1:
+ case WM5100_HPLPF4_2:
+ case WM5100_DSP1_DM_0:
+ case WM5100_DSP1_DM_1:
+ case WM5100_DSP1_DM_2:
+ case WM5100_DSP1_DM_3:
+ case WM5100_DSP1_DM_508:
+ case WM5100_DSP1_DM_509:
+ case WM5100_DSP1_DM_510:
+ case WM5100_DSP1_DM_511:
+ case WM5100_DSP1_PM_0:
+ case WM5100_DSP1_PM_1:
+ case WM5100_DSP1_PM_2:
+ case WM5100_DSP1_PM_3:
+ case WM5100_DSP1_PM_4:
+ case WM5100_DSP1_PM_5:
+ case WM5100_DSP1_PM_1530:
+ case WM5100_DSP1_PM_1531:
+ case WM5100_DSP1_PM_1532:
+ case WM5100_DSP1_PM_1533:
+ case WM5100_DSP1_PM_1534:
+ case WM5100_DSP1_PM_1535:
+ case WM5100_DSP1_ZM_0:
+ case WM5100_DSP1_ZM_1:
+ case WM5100_DSP1_ZM_2:
+ case WM5100_DSP1_ZM_3:
+ case WM5100_DSP1_ZM_2044:
+ case WM5100_DSP1_ZM_2045:
+ case WM5100_DSP1_ZM_2046:
+ case WM5100_DSP1_ZM_2047:
+ case WM5100_DSP2_DM_0:
+ case WM5100_DSP2_DM_1:
+ case WM5100_DSP2_DM_2:
+ case WM5100_DSP2_DM_3:
+ case WM5100_DSP2_DM_508:
+ case WM5100_DSP2_DM_509:
+ case WM5100_DSP2_DM_510:
+ case WM5100_DSP2_DM_511:
+ case WM5100_DSP2_PM_0:
+ case WM5100_DSP2_PM_1:
+ case WM5100_DSP2_PM_2:
+ case WM5100_DSP2_PM_3:
+ case WM5100_DSP2_PM_4:
+ case WM5100_DSP2_PM_5:
+ case WM5100_DSP2_PM_1530:
+ case WM5100_DSP2_PM_1531:
+ case WM5100_DSP2_PM_1532:
+ case WM5100_DSP2_PM_1533:
+ case WM5100_DSP2_PM_1534:
+ case WM5100_DSP2_PM_1535:
+ case WM5100_DSP2_ZM_0:
+ case WM5100_DSP2_ZM_1:
+ case WM5100_DSP2_ZM_2:
+ case WM5100_DSP2_ZM_3:
+ case WM5100_DSP2_ZM_2044:
+ case WM5100_DSP2_ZM_2045:
+ case WM5100_DSP2_ZM_2046:
+ case WM5100_DSP2_ZM_2047:
+ case WM5100_DSP3_DM_0:
+ case WM5100_DSP3_DM_1:
+ case WM5100_DSP3_DM_2:
+ case WM5100_DSP3_DM_3:
+ case WM5100_DSP3_DM_508:
+ case WM5100_DSP3_DM_509:
+ case WM5100_DSP3_DM_510:
+ case WM5100_DSP3_DM_511:
+ case WM5100_DSP3_PM_0:
+ case WM5100_DSP3_PM_1:
+ case WM5100_DSP3_PM_2:
+ case WM5100_DSP3_PM_3:
+ case WM5100_DSP3_PM_4:
+ case WM5100_DSP3_PM_5:
+ case WM5100_DSP3_PM_1530:
+ case WM5100_DSP3_PM_1531:
+ case WM5100_DSP3_PM_1532:
+ case WM5100_DSP3_PM_1533:
+ case WM5100_DSP3_PM_1534:
+ case WM5100_DSP3_PM_1535:
+ case WM5100_DSP3_ZM_0:
+ case WM5100_DSP3_ZM_1:
+ case WM5100_DSP3_ZM_2:
+ case WM5100_DSP3_ZM_3:
+ case WM5100_DSP3_ZM_2044:
+ case WM5100_DSP3_ZM_2045:
+ case WM5100_DSP3_ZM_2046:
+ case WM5100_DSP3_ZM_2047:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+u16 wm5100_reg_defaults[WM5100_MAX_REGISTER + 1] = {
+ [0x0000] = 0x0000, /* R0 - software reset */
+ [0x0001] = 0x0000, /* R1 - Device Revision */
+ [0x0010] = 0x0801, /* R16 - Ctrl IF 1 */
+ [0x0020] = 0x0000, /* R32 - Tone Generator 1 */
+ [0x0030] = 0x0000, /* R48 - PWM Drive 1 */
+ [0x0031] = 0x0100, /* R49 - PWM Drive 2 */
+ [0x0032] = 0x0100, /* R50 - PWM Drive 3 */
+ [0x0100] = 0x0002, /* R256 - Clocking 1 */
+ [0x0101] = 0x0000, /* R257 - Clocking 3 */
+ [0x0102] = 0x0011, /* R258 - Clocking 4 */
+ [0x0103] = 0x0011, /* R259 - Clocking 5 */
+ [0x0104] = 0x0011, /* R260 - Clocking 6 */
+ [0x0107] = 0x0000, /* R263 - Clocking 7 */
+ [0x0108] = 0x0000, /* R264 - Clocking 8 */
+ [0x0120] = 0x0000, /* R288 - ASRC_ENABLE */
+ [0x0121] = 0x0000, /* R289 - ASRC_STATUS */
+ [0x0122] = 0x0000, /* R290 - ASRC_RATE1 */
+ [0x0141] = 0x8000, /* R321 - ISRC 1 CTRL 1 */
+ [0x0142] = 0x0000, /* R322 - ISRC 1 CTRL 2 */
+ [0x0143] = 0x8000, /* R323 - ISRC 2 CTRL1 */
+ [0x0144] = 0x0000, /* R324 - ISRC 2 CTRL 2 */
+ [0x0182] = 0x0000, /* R386 - FLL1 Control 1 */
+ [0x0183] = 0x0000, /* R387 - FLL1 Control 2 */
+ [0x0184] = 0x0000, /* R388 - FLL1 Control 3 */
+ [0x0186] = 0x0177, /* R390 - FLL1 Control 5 */
+ [0x0187] = 0x0001, /* R391 - FLL1 Control 6 */
+ [0x0188] = 0x0000, /* R392 - FLL1 EFS 1 */
+ [0x01A2] = 0x0000, /* R418 - FLL2 Control 1 */
+ [0x01A3] = 0x0000, /* R419 - FLL2 Control 2 */
+ [0x01A4] = 0x0000, /* R420 - FLL2 Control 3 */
+ [0x01A6] = 0x0177, /* R422 - FLL2 Control 5 */
+ [0x01A7] = 0x0001, /* R423 - FLL2 Control 6 */
+ [0x01A8] = 0x0000, /* R424 - FLL2 EFS 1 */
+ [0x0200] = 0x0020, /* R512 - Mic Charge Pump 1 */
+ [0x0201] = 0xB084, /* R513 - Mic Charge Pump 2 */
+ [0x0202] = 0xBBDE, /* R514 - HP Charge Pump 1 */
+ [0x0211] = 0x20D4, /* R529 - LDO1 Control */
+ [0x0215] = 0x0062, /* R533 - Mic Bias Ctrl 1 */
+ [0x0216] = 0x0062, /* R534 - Mic Bias Ctrl 2 */
+ [0x0217] = 0x0062, /* R535 - Mic Bias Ctrl 3 */
+ [0x0280] = 0x0004, /* R640 - Accessory Detect Mode 1 */
+ [0x0288] = 0x0020, /* R648 - Headphone Detect 1 */
+ [0x0289] = 0x0000, /* R649 - Headphone Detect 2 */
+ [0x0290] = 0x1100, /* R656 - Mic Detect 1 */
+ [0x0291] = 0x009F, /* R657 - Mic Detect 2 */
+ [0x0292] = 0x0000, /* R658 - Mic Detect 3 */
+ [0x0301] = 0x0000, /* R769 - Input Enables */
+ [0x0302] = 0x0000, /* R770 - Input Enables Status */
+ [0x0310] = 0x2280, /* R784 - Status */
+ [0x0311] = 0x0080, /* R785 - IN1R Control */
+ [0x0312] = 0x2280, /* R786 - IN2L Control */
+ [0x0313] = 0x0080, /* R787 - IN2R Control */
+ [0x0314] = 0x2280, /* R788 - IN3L Control */
+ [0x0315] = 0x0080, /* R789 - IN3R Control */
+ [0x0316] = 0x2280, /* R790 - IN4L Control */
+ [0x0317] = 0x0080, /* R791 - IN4R Control */
+ [0x0318] = 0x0000, /* R792 - RXANC_SRC */
+ [0x0319] = 0x0022, /* R793 - Input Volume Ramp */
+ [0x0320] = 0x0180, /* R800 - ADC Digital Volume 1L */
+ [0x0321] = 0x0180, /* R801 - ADC Digital Volume 1R */
+ [0x0322] = 0x0180, /* R802 - ADC Digital Volume 2L */
+ [0x0323] = 0x0180, /* R803 - ADC Digital Volume 2R */
+ [0x0324] = 0x0180, /* R804 - ADC Digital Volume 3L */
+ [0x0325] = 0x0180, /* R805 - ADC Digital Volume 3R */
+ [0x0326] = 0x0180, /* R806 - ADC Digital Volume 4L */
+ [0x0327] = 0x0180, /* R807 - ADC Digital Volume 4R */
+ [0x0401] = 0x0000, /* R1025 - Output Enables 2 */
+ [0x0402] = 0x0000, /* R1026 - Output Status 1 */
+ [0x0403] = 0x0000, /* R1027 - Output Status 2 */
+ [0x0408] = 0x0000, /* R1032 - Channel Enables 1 */
+ [0x0410] = 0x0080, /* R1040 - Out Volume 1L */
+ [0x0411] = 0x0080, /* R1041 - Out Volume 1R */
+ [0x0412] = 0x0080, /* R1042 - DAC Volume Limit 1L */
+ [0x0413] = 0x0080, /* R1043 - DAC Volume Limit 1R */
+ [0x0414] = 0x0080, /* R1044 - Out Volume 2L */
+ [0x0415] = 0x0080, /* R1045 - Out Volume 2R */
+ [0x0416] = 0x0080, /* R1046 - DAC Volume Limit 2L */
+ [0x0417] = 0x0080, /* R1047 - DAC Volume Limit 2R */
+ [0x0418] = 0x0080, /* R1048 - Out Volume 3L */
+ [0x0419] = 0x0080, /* R1049 - Out Volume 3R */
+ [0x041A] = 0x0080, /* R1050 - DAC Volume Limit 3L */
+ [0x041B] = 0x0080, /* R1051 - DAC Volume Limit 3R */
+ [0x041C] = 0x0080, /* R1052 - Out Volume 4L */
+ [0x041D] = 0x0080, /* R1053 - Out Volume 4R */
+ [0x041E] = 0x0080, /* R1054 - DAC Volume Limit 5L */
+ [0x041F] = 0x0080, /* R1055 - DAC Volume Limit 5R */
+ [0x0420] = 0x0080, /* R1056 - DAC Volume Limit 6L */
+ [0x0421] = 0x0080, /* R1057 - DAC Volume Limit 6R */
+ [0x0440] = 0x0000, /* R1088 - DAC AEC Control 1 */
+ [0x0441] = 0x0022, /* R1089 - Output Volume Ramp */
+ [0x0480] = 0x0180, /* R1152 - DAC Digital Volume 1L */
+ [0x0481] = 0x0180, /* R1153 - DAC Digital Volume 1R */
+ [0x0482] = 0x0180, /* R1154 - DAC Digital Volume 2L */
+ [0x0483] = 0x0180, /* R1155 - DAC Digital Volume 2R */
+ [0x0484] = 0x0180, /* R1156 - DAC Digital Volume 3L */
+ [0x0485] = 0x0180, /* R1157 - DAC Digital Volume 3R */
+ [0x0486] = 0x0180, /* R1158 - DAC Digital Volume 4L */
+ [0x0487] = 0x0180, /* R1159 - DAC Digital Volume 4R */
+ [0x0488] = 0x0180, /* R1160 - DAC Digital Volume 5L */
+ [0x0489] = 0x0180, /* R1161 - DAC Digital Volume 5R */
+ [0x048A] = 0x0180, /* R1162 - DAC Digital Volume 6L */
+ [0x048B] = 0x0180, /* R1163 - DAC Digital Volume 6R */
+ [0x04C0] = 0x0069, /* R1216 - PDM SPK1 CTRL 1 */
+ [0x04C1] = 0x0000, /* R1217 - PDM SPK1 CTRL 2 */
+ [0x04C2] = 0x0069, /* R1218 - PDM SPK2 CTRL 1 */
+ [0x04C3] = 0x0000, /* R1219 - PDM SPK2 CTRL 2 */
+ [0x0500] = 0x000C, /* R1280 - Audio IF 1_1 */
+ [0x0501] = 0x0008, /* R1281 - Audio IF 1_2 */
+ [0x0502] = 0x0000, /* R1282 - Audio IF 1_3 */
+ [0x0503] = 0x0000, /* R1283 - Audio IF 1_4 */
+ [0x0504] = 0x0000, /* R1284 - Audio IF 1_5 */
+ [0x0505] = 0x0300, /* R1285 - Audio IF 1_6 */
+ [0x0506] = 0x0300, /* R1286 - Audio IF 1_7 */
+ [0x0507] = 0x1820, /* R1287 - Audio IF 1_8 */
+ [0x0508] = 0x1820, /* R1288 - Audio IF 1_9 */
+ [0x0509] = 0x0000, /* R1289 - Audio IF 1_10 */
+ [0x050A] = 0x0001, /* R1290 - Audio IF 1_11 */
+ [0x050B] = 0x0002, /* R1291 - Audio IF 1_12 */
+ [0x050C] = 0x0003, /* R1292 - Audio IF 1_13 */
+ [0x050D] = 0x0004, /* R1293 - Audio IF 1_14 */
+ [0x050E] = 0x0005, /* R1294 - Audio IF 1_15 */
+ [0x050F] = 0x0006, /* R1295 - Audio IF 1_16 */
+ [0x0510] = 0x0007, /* R1296 - Audio IF 1_17 */
+ [0x0511] = 0x0000, /* R1297 - Audio IF 1_18 */
+ [0x0512] = 0x0001, /* R1298 - Audio IF 1_19 */
+ [0x0513] = 0x0002, /* R1299 - Audio IF 1_20 */
+ [0x0514] = 0x0003, /* R1300 - Audio IF 1_21 */
+ [0x0515] = 0x0004, /* R1301 - Audio IF 1_22 */
+ [0x0516] = 0x0005, /* R1302 - Audio IF 1_23 */
+ [0x0517] = 0x0006, /* R1303 - Audio IF 1_24 */
+ [0x0518] = 0x0007, /* R1304 - Audio IF 1_25 */
+ [0x0519] = 0x0000, /* R1305 - Audio IF 1_26 */
+ [0x051A] = 0x0000, /* R1306 - Audio IF 1_27 */
+ [0x0540] = 0x000C, /* R1344 - Audio IF 2_1 */
+ [0x0541] = 0x0008, /* R1345 - Audio IF 2_2 */
+ [0x0542] = 0x0000, /* R1346 - Audio IF 2_3 */
+ [0x0543] = 0x0000, /* R1347 - Audio IF 2_4 */
+ [0x0544] = 0x0000, /* R1348 - Audio IF 2_5 */
+ [0x0545] = 0x0300, /* R1349 - Audio IF 2_6 */
+ [0x0546] = 0x0300, /* R1350 - Audio IF 2_7 */
+ [0x0547] = 0x1820, /* R1351 - Audio IF 2_8 */
+ [0x0548] = 0x1820, /* R1352 - Audio IF 2_9 */
+ [0x0549] = 0x0000, /* R1353 - Audio IF 2_10 */
+ [0x054A] = 0x0001, /* R1354 - Audio IF 2_11 */
+ [0x0551] = 0x0000, /* R1361 - Audio IF 2_18 */
+ [0x0552] = 0x0001, /* R1362 - Audio IF 2_19 */
+ [0x0559] = 0x0000, /* R1369 - Audio IF 2_26 */
+ [0x055A] = 0x0000, /* R1370 - Audio IF 2_27 */
+ [0x0580] = 0x000C, /* R1408 - Audio IF 3_1 */
+ [0x0581] = 0x0008, /* R1409 - Audio IF 3_2 */
+ [0x0582] = 0x0000, /* R1410 - Audio IF 3_3 */
+ [0x0583] = 0x0000, /* R1411 - Audio IF 3_4 */
+ [0x0584] = 0x0000, /* R1412 - Audio IF 3_5 */
+ [0x0585] = 0x0300, /* R1413 - Audio IF 3_6 */
+ [0x0586] = 0x0300, /* R1414 - Audio IF 3_7 */
+ [0x0587] = 0x1820, /* R1415 - Audio IF 3_8 */
+ [0x0588] = 0x1820, /* R1416 - Audio IF 3_9 */
+ [0x0589] = 0x0000, /* R1417 - Audio IF 3_10 */
+ [0x058A] = 0x0001, /* R1418 - Audio IF 3_11 */
+ [0x0591] = 0x0000, /* R1425 - Audio IF 3_18 */
+ [0x0592] = 0x0001, /* R1426 - Audio IF 3_19 */
+ [0x0599] = 0x0000, /* R1433 - Audio IF 3_26 */
+ [0x059A] = 0x0000, /* R1434 - Audio IF 3_27 */
+ [0x0640] = 0x0000, /* R1600 - PWM1MIX Input 1 Source */
+ [0x0641] = 0x0080, /* R1601 - PWM1MIX Input 1 Volume */
+ [0x0642] = 0x0000, /* R1602 - PWM1MIX Input 2 Source */
+ [0x0643] = 0x0080, /* R1603 - PWM1MIX Input 2 Volume */
+ [0x0644] = 0x0000, /* R1604 - PWM1MIX Input 3 Source */
+ [0x0645] = 0x0080, /* R1605 - PWM1MIX Input 3 Volume */
+ [0x0646] = 0x0000, /* R1606 - PWM1MIX Input 4 Source */
+ [0x0647] = 0x0080, /* R1607 - PWM1MIX Input 4 Volume */
+ [0x0648] = 0x0000, /* R1608 - PWM2MIX Input 1 Source */
+ [0x0649] = 0x0080, /* R1609 - PWM2MIX Input 1 Volume */
+ [0x064A] = 0x0000, /* R1610 - PWM2MIX Input 2 Source */
+ [0x064B] = 0x0080, /* R1611 - PWM2MIX Input 2 Volume */
+ [0x064C] = 0x0000, /* R1612 - PWM2MIX Input 3 Source */
+ [0x064D] = 0x0080, /* R1613 - PWM2MIX Input 3 Volume */
+ [0x064E] = 0x0000, /* R1614 - PWM2MIX Input 4 Source */
+ [0x064F] = 0x0080, /* R1615 - PWM2MIX Input 4 Volume */
+ [0x0680] = 0x0000, /* R1664 - OUT1LMIX Input 1 Source */
+ [0x0681] = 0x0080, /* R1665 - OUT1LMIX Input 1 Volume */
+ [0x0682] = 0x0000, /* R1666 - OUT1LMIX Input 2 Source */
+ [0x0683] = 0x0080, /* R1667 - OUT1LMIX Input 2 Volume */
+ [0x0684] = 0x0000, /* R1668 - OUT1LMIX Input 3 Source */
+ [0x0685] = 0x0080, /* R1669 - OUT1LMIX Input 3 Volume */
+ [0x0686] = 0x0000, /* R1670 - OUT1LMIX Input 4 Source */
+ [0x0687] = 0x0080, /* R1671 - OUT1LMIX Input 4 Volume */
+ [0x0688] = 0x0000, /* R1672 - OUT1RMIX Input 1 Source */
+ [0x0689] = 0x0080, /* R1673 - OUT1RMIX Input 1 Volume */
+ [0x068A] = 0x0000, /* R1674 - OUT1RMIX Input 2 Source */
+ [0x068B] = 0x0080, /* R1675 - OUT1RMIX Input 2 Volume */
+ [0x068C] = 0x0000, /* R1676 - OUT1RMIX Input 3 Source */
+ [0x068D] = 0x0080, /* R1677 - OUT1RMIX Input 3 Volume */
+ [0x068E] = 0x0000, /* R1678 - OUT1RMIX Input 4 Source */
+ [0x068F] = 0x0080, /* R1679 - OUT1RMIX Input 4 Volume */
+ [0x0690] = 0x0000, /* R1680 - OUT2LMIX Input 1 Source */
+ [0x0691] = 0x0080, /* R1681 - OUT2LMIX Input 1 Volume */
+ [0x0692] = 0x0000, /* R1682 - OUT2LMIX Input 2 Source */
+ [0x0693] = 0x0080, /* R1683 - OUT2LMIX Input 2 Volume */
+ [0x0694] = 0x0000, /* R1684 - OUT2LMIX Input 3 Source */
+ [0x0695] = 0x0080, /* R1685 - OUT2LMIX Input 3 Volume */
+ [0x0696] = 0x0000, /* R1686 - OUT2LMIX Input 4 Source */
+ [0x0697] = 0x0080, /* R1687 - OUT2LMIX Input 4 Volume */
+ [0x0698] = 0x0000, /* R1688 - OUT2RMIX Input 1 Source */
+ [0x0699] = 0x0080, /* R1689 - OUT2RMIX Input 1 Volume */
+ [0x069A] = 0x0000, /* R1690 - OUT2RMIX Input 2 Source */
+ [0x069B] = 0x0080, /* R1691 - OUT2RMIX Input 2 Volume */
+ [0x069C] = 0x0000, /* R1692 - OUT2RMIX Input 3 Source */
+ [0x069D] = 0x0080, /* R1693 - OUT2RMIX Input 3 Volume */
+ [0x069E] = 0x0000, /* R1694 - OUT2RMIX Input 4 Source */
+ [0x069F] = 0x0080, /* R1695 - OUT2RMIX Input 4 Volume */
+ [0x06A0] = 0x0000, /* R1696 - OUT3LMIX Input 1 Source */
+ [0x06A1] = 0x0080, /* R1697 - OUT3LMIX Input 1 Volume */
+ [0x06A2] = 0x0000, /* R1698 - OUT3LMIX Input 2 Source */
+ [0x06A3] = 0x0080, /* R1699 - OUT3LMIX Input 2 Volume */
+ [0x06A4] = 0x0000, /* R1700 - OUT3LMIX Input 3 Source */
+ [0x06A5] = 0x0080, /* R1701 - OUT3LMIX Input 3 Volume */
+ [0x06A6] = 0x0000, /* R1702 - OUT3LMIX Input 4 Source */
+ [0x06A7] = 0x0080, /* R1703 - OUT3LMIX Input 4 Volume */
+ [0x06A8] = 0x0000, /* R1704 - OUT3RMIX Input 1 Source */
+ [0x06A9] = 0x0080, /* R1705 - OUT3RMIX Input 1 Volume */
+ [0x06AA] = 0x0000, /* R1706 - OUT3RMIX Input 2 Source */
+ [0x06AB] = 0x0080, /* R1707 - OUT3RMIX Input 2 Volume */
+ [0x06AC] = 0x0000, /* R1708 - OUT3RMIX Input 3 Source */
+ [0x06AD] = 0x0080, /* R1709 - OUT3RMIX Input 3 Volume */
+ [0x06AE] = 0x0000, /* R1710 - OUT3RMIX Input 4 Source */
+ [0x06AF] = 0x0080, /* R1711 - OUT3RMIX Input 4 Volume */
+ [0x06B0] = 0x0000, /* R1712 - OUT4LMIX Input 1 Source */
+ [0x06B1] = 0x0080, /* R1713 - OUT4LMIX Input 1 Volume */
+ [0x06B2] = 0x0000, /* R1714 - OUT4LMIX Input 2 Source */
+ [0x06B3] = 0x0080, /* R1715 - OUT4LMIX Input 2 Volume */
+ [0x06B4] = 0x0000, /* R1716 - OUT4LMIX Input 3 Source */
+ [0x06B5] = 0x0080, /* R1717 - OUT4LMIX Input 3 Volume */
+ [0x06B6] = 0x0000, /* R1718 - OUT4LMIX Input 4 Source */
+ [0x06B7] = 0x0080, /* R1719 - OUT4LMIX Input 4 Volume */
+ [0x06B8] = 0x0000, /* R1720 - OUT4RMIX Input 1 Source */
+ [0x06B9] = 0x0080, /* R1721 - OUT4RMIX Input 1 Volume */
+ [0x06BA] = 0x0000, /* R1722 - OUT4RMIX Input 2 Source */
+ [0x06BB] = 0x0080, /* R1723 - OUT4RMIX Input 2 Volume */
+ [0x06BC] = 0x0000, /* R1724 - OUT4RMIX Input 3 Source */
+ [0x06BD] = 0x0080, /* R1725 - OUT4RMIX Input 3 Volume */
+ [0x06BE] = 0x0000, /* R1726 - OUT4RMIX Input 4 Source */
+ [0x06BF] = 0x0080, /* R1727 - OUT4RMIX Input 4 Volume */
+ [0x06C0] = 0x0000, /* R1728 - OUT5LMIX Input 1 Source */
+ [0x06C1] = 0x0080, /* R1729 - OUT5LMIX Input 1 Volume */
+ [0x06C2] = 0x0000, /* R1730 - OUT5LMIX Input 2 Source */
+ [0x06C3] = 0x0080, /* R1731 - OUT5LMIX Input 2 Volume */
+ [0x06C4] = 0x0000, /* R1732 - OUT5LMIX Input 3 Source */
+ [0x06C5] = 0x0080, /* R1733 - OUT5LMIX Input 3 Volume */
+ [0x06C6] = 0x0000, /* R1734 - OUT5LMIX Input 4 Source */
+ [0x06C7] = 0x0080, /* R1735 - OUT5LMIX Input 4 Volume */
+ [0x06C8] = 0x0000, /* R1736 - OUT5RMIX Input 1 Source */
+ [0x06C9] = 0x0080, /* R1737 - OUT5RMIX Input 1 Volume */
+ [0x06CA] = 0x0000, /* R1738 - OUT5RMIX Input 2 Source */
+ [0x06CB] = 0x0080, /* R1739 - OUT5RMIX Input 2 Volume */
+ [0x06CC] = 0x0000, /* R1740 - OUT5RMIX Input 3 Source */
+ [0x06CD] = 0x0080, /* R1741 - OUT5RMIX Input 3 Volume */
+ [0x06CE] = 0x0000, /* R1742 - OUT5RMIX Input 4 Source */
+ [0x06CF] = 0x0080, /* R1743 - OUT5RMIX Input 4 Volume */
+ [0x06D0] = 0x0000, /* R1744 - OUT6LMIX Input 1 Source */
+ [0x06D1] = 0x0080, /* R1745 - OUT6LMIX Input 1 Volume */
+ [0x06D2] = 0x0000, /* R1746 - OUT6LMIX Input 2 Source */
+ [0x06D3] = 0x0080, /* R1747 - OUT6LMIX Input 2 Volume */
+ [0x06D4] = 0x0000, /* R1748 - OUT6LMIX Input 3 Source */
+ [0x06D5] = 0x0080, /* R1749 - OUT6LMIX Input 3 Volume */
+ [0x06D6] = 0x0000, /* R1750 - OUT6LMIX Input 4 Source */
+ [0x06D7] = 0x0080, /* R1751 - OUT6LMIX Input 4 Volume */
+ [0x06D8] = 0x0000, /* R1752 - OUT6RMIX Input 1 Source */
+ [0x06D9] = 0x0080, /* R1753 - OUT6RMIX Input 1 Volume */
+ [0x06DA] = 0x0000, /* R1754 - OUT6RMIX Input 2 Source */
+ [0x06DB] = 0x0080, /* R1755 - OUT6RMIX Input 2 Volume */
+ [0x06DC] = 0x0000, /* R1756 - OUT6RMIX Input 3 Source */
+ [0x06DD] = 0x0080, /* R1757 - OUT6RMIX Input 3 Volume */
+ [0x06DE] = 0x0000, /* R1758 - OUT6RMIX Input 4 Source */
+ [0x06DF] = 0x0080, /* R1759 - OUT6RMIX Input 4 Volume */
+ [0x0700] = 0x0000, /* R1792 - AIF1TX1MIX Input 1 Source */
+ [0x0701] = 0x0080, /* R1793 - AIF1TX1MIX Input 1 Volume */
+ [0x0702] = 0x0000, /* R1794 - AIF1TX1MIX Input 2 Source */
+ [0x0703] = 0x0080, /* R1795 - AIF1TX1MIX Input 2 Volume */
+ [0x0704] = 0x0000, /* R1796 - AIF1TX1MIX Input 3 Source */
+ [0x0705] = 0x0080, /* R1797 - AIF1TX1MIX Input 3 Volume */
+ [0x0706] = 0x0000, /* R1798 - AIF1TX1MIX Input 4 Source */
+ [0x0707] = 0x0080, /* R1799 - AIF1TX1MIX Input 4 Volume */
+ [0x0708] = 0x0000, /* R1800 - AIF1TX2MIX Input 1 Source */
+ [0x0709] = 0x0080, /* R1801 - AIF1TX2MIX Input 1 Volume */
+ [0x070A] = 0x0000, /* R1802 - AIF1TX2MIX Input 2 Source */
+ [0x070B] = 0x0080, /* R1803 - AIF1TX2MIX Input 2 Volume */
+ [0x070C] = 0x0000, /* R1804 - AIF1TX2MIX Input 3 Source */
+ [0x070D] = 0x0080, /* R1805 - AIF1TX2MIX Input 3 Volume */
+ [0x070E] = 0x0000, /* R1806 - AIF1TX2MIX Input 4 Source */
+ [0x070F] = 0x0080, /* R1807 - AIF1TX2MIX Input 4 Volume */
+ [0x0710] = 0x0000, /* R1808 - AIF1TX3MIX Input 1 Source */
+ [0x0711] = 0x0080, /* R1809 - AIF1TX3MIX Input 1 Volume */
+ [0x0712] = 0x0000, /* R1810 - AIF1TX3MIX Input 2 Source */
+ [0x0713] = 0x0080, /* R1811 - AIF1TX3MIX Input 2 Volume */
+ [0x0714] = 0x0000, /* R1812 - AIF1TX3MIX Input 3 Source */
+ [0x0715] = 0x0080, /* R1813 - AIF1TX3MIX Input 3 Volume */
+ [0x0716] = 0x0000, /* R1814 - AIF1TX3MIX Input 4 Source */
+ [0x0717] = 0x0080, /* R1815 - AIF1TX3MIX Input 4 Volume */
+ [0x0718] = 0x0000, /* R1816 - AIF1TX4MIX Input 1 Source */
+ [0x0719] = 0x0080, /* R1817 - AIF1TX4MIX Input 1 Volume */
+ [0x071A] = 0x0000, /* R1818 - AIF1TX4MIX Input 2 Source */
+ [0x071B] = 0x0080, /* R1819 - AIF1TX4MIX Input 2 Volume */
+ [0x071C] = 0x0000, /* R1820 - AIF1TX4MIX Input 3 Source */
+ [0x071D] = 0x0080, /* R1821 - AIF1TX4MIX Input 3 Volume */
+ [0x071E] = 0x0000, /* R1822 - AIF1TX4MIX Input 4 Source */
+ [0x071F] = 0x0080, /* R1823 - AIF1TX4MIX Input 4 Volume */
+ [0x0720] = 0x0000, /* R1824 - AIF1TX5MIX Input 1 Source */
+ [0x0721] = 0x0080, /* R1825 - AIF1TX5MIX Input 1 Volume */
+ [0x0722] = 0x0000, /* R1826 - AIF1TX5MIX Input 2 Source */
+ [0x0723] = 0x0080, /* R1827 - AIF1TX5MIX Input 2 Volume */
+ [0x0724] = 0x0000, /* R1828 - AIF1TX5MIX Input 3 Source */
+ [0x0725] = 0x0080, /* R1829 - AIF1TX5MIX Input 3 Volume */
+ [0x0726] = 0x0000, /* R1830 - AIF1TX5MIX Input 4 Source */
+ [0x0727] = 0x0080, /* R1831 - AIF1TX5MIX Input 4 Volume */
+ [0x0728] = 0x0000, /* R1832 - AIF1TX6MIX Input 1 Source */
+ [0x0729] = 0x0080, /* R1833 - AIF1TX6MIX Input 1 Volume */
+ [0x072A] = 0x0000, /* R1834 - AIF1TX6MIX Input 2 Source */
+ [0x072B] = 0x0080, /* R1835 - AIF1TX6MIX Input 2 Volume */
+ [0x072C] = 0x0000, /* R1836 - AIF1TX6MIX Input 3 Source */
+ [0x072D] = 0x0080, /* R1837 - AIF1TX6MIX Input 3 Volume */
+ [0x072E] = 0x0000, /* R1838 - AIF1TX6MIX Input 4 Source */
+ [0x072F] = 0x0080, /* R1839 - AIF1TX6MIX Input 4 Volume */
+ [0x0730] = 0x0000, /* R1840 - AIF1TX7MIX Input 1 Source */
+ [0x0731] = 0x0080, /* R1841 - AIF1TX7MIX Input 1 Volume */
+ [0x0732] = 0x0000, /* R1842 - AIF1TX7MIX Input 2 Source */
+ [0x0733] = 0x0080, /* R1843 - AIF1TX7MIX Input 2 Volume */
+ [0x0734] = 0x0000, /* R1844 - AIF1TX7MIX Input 3 Source */
+ [0x0735] = 0x0080, /* R1845 - AIF1TX7MIX Input 3 Volume */
+ [0x0736] = 0x0000, /* R1846 - AIF1TX7MIX Input 4 Source */
+ [0x0737] = 0x0080, /* R1847 - AIF1TX7MIX Input 4 Volume */
+ [0x0738] = 0x0000, /* R1848 - AIF1TX8MIX Input 1 Source */
+ [0x0739] = 0x0080, /* R1849 - AIF1TX8MIX Input 1 Volume */
+ [0x073A] = 0x0000, /* R1850 - AIF1TX8MIX Input 2 Source */
+ [0x073B] = 0x0080, /* R1851 - AIF1TX8MIX Input 2 Volume */
+ [0x073C] = 0x0000, /* R1852 - AIF1TX8MIX Input 3 Source */
+ [0x073D] = 0x0080, /* R1853 - AIF1TX8MIX Input 3 Volume */
+ [0x073E] = 0x0000, /* R1854 - AIF1TX8MIX Input 4 Source */
+ [0x073F] = 0x0080, /* R1855 - AIF1TX8MIX Input 4 Volume */
+ [0x0740] = 0x0000, /* R1856 - AIF2TX1MIX Input 1 Source */
+ [0x0741] = 0x0080, /* R1857 - AIF2TX1MIX Input 1 Volume */
+ [0x0742] = 0x0000, /* R1858 - AIF2TX1MIX Input 2 Source */
+ [0x0743] = 0x0080, /* R1859 - AIF2TX1MIX Input 2 Volume */
+ [0x0744] = 0x0000, /* R1860 - AIF2TX1MIX Input 3 Source */
+ [0x0745] = 0x0080, /* R1861 - AIF2TX1MIX Input 3 Volume */
+ [0x0746] = 0x0000, /* R1862 - AIF2TX1MIX Input 4 Source */
+ [0x0747] = 0x0080, /* R1863 - AIF2TX1MIX Input 4 Volume */
+ [0x0748] = 0x0000, /* R1864 - AIF2TX2MIX Input 1 Source */
+ [0x0749] = 0x0080, /* R1865 - AIF2TX2MIX Input 1 Volume */
+ [0x074A] = 0x0000, /* R1866 - AIF2TX2MIX Input 2 Source */
+ [0x074B] = 0x0080, /* R1867 - AIF2TX2MIX Input 2 Volume */
+ [0x074C] = 0x0000, /* R1868 - AIF2TX2MIX Input 3 Source */
+ [0x074D] = 0x0080, /* R1869 - AIF2TX2MIX Input 3 Volume */
+ [0x074E] = 0x0000, /* R1870 - AIF2TX2MIX Input 4 Source */
+ [0x074F] = 0x0080, /* R1871 - AIF2TX2MIX Input 4 Volume */
+ [0x0780] = 0x0000, /* R1920 - AIF3TX1MIX Input 1 Source */
+ [0x0781] = 0x0080, /* R1921 - AIF3TX1MIX Input 1 Volume */
+ [0x0782] = 0x0000, /* R1922 - AIF3TX1MIX Input 2 Source */
+ [0x0783] = 0x0080, /* R1923 - AIF3TX1MIX Input 2 Volume */
+ [0x0784] = 0x0000, /* R1924 - AIF3TX1MIX Input 3 Source */
+ [0x0785] = 0x0080, /* R1925 - AIF3TX1MIX Input 3 Volume */
+ [0x0786] = 0x0000, /* R1926 - AIF3TX1MIX Input 4 Source */
+ [0x0787] = 0x0080, /* R1927 - AIF3TX1MIX Input 4 Volume */
+ [0x0788] = 0x0000, /* R1928 - AIF3TX2MIX Input 1 Source */
+ [0x0789] = 0x0080, /* R1929 - AIF3TX2MIX Input 1 Volume */
+ [0x078A] = 0x0000, /* R1930 - AIF3TX2MIX Input 2 Source */
+ [0x078B] = 0x0080, /* R1931 - AIF3TX2MIX Input 2 Volume */
+ [0x078C] = 0x0000, /* R1932 - AIF3TX2MIX Input 3 Source */
+ [0x078D] = 0x0080, /* R1933 - AIF3TX2MIX Input 3 Volume */
+ [0x078E] = 0x0000, /* R1934 - AIF3TX2MIX Input 4 Source */
+ [0x078F] = 0x0080, /* R1935 - AIF3TX2MIX Input 4 Volume */
+ [0x0880] = 0x0000, /* R2176 - EQ1MIX Input 1 Source */
+ [0x0881] = 0x0080, /* R2177 - EQ1MIX Input 1 Volume */
+ [0x0882] = 0x0000, /* R2178 - EQ1MIX Input 2 Source */
+ [0x0883] = 0x0080, /* R2179 - EQ1MIX Input 2 Volume */
+ [0x0884] = 0x0000, /* R2180 - EQ1MIX Input 3 Source */
+ [0x0885] = 0x0080, /* R2181 - EQ1MIX Input 3 Volume */
+ [0x0886] = 0x0000, /* R2182 - EQ1MIX Input 4 Source */
+ [0x0887] = 0x0080, /* R2183 - EQ1MIX Input 4 Volume */
+ [0x0888] = 0x0000, /* R2184 - EQ2MIX Input 1 Source */
+ [0x0889] = 0x0080, /* R2185 - EQ2MIX Input 1 Volume */
+ [0x088A] = 0x0000, /* R2186 - EQ2MIX Input 2 Source */
+ [0x088B] = 0x0080, /* R2187 - EQ2MIX Input 2 Volume */
+ [0x088C] = 0x0000, /* R2188 - EQ2MIX Input 3 Source */
+ [0x088D] = 0x0080, /* R2189 - EQ2MIX Input 3 Volume */
+ [0x088E] = 0x0000, /* R2190 - EQ2MIX Input 4 Source */
+ [0x088F] = 0x0080, /* R2191 - EQ2MIX Input 4 Volume */
+ [0x0890] = 0x0000, /* R2192 - EQ3MIX Input 1 Source */
+ [0x0891] = 0x0080, /* R2193 - EQ3MIX Input 1 Volume */
+ [0x0892] = 0x0000, /* R2194 - EQ3MIX Input 2 Source */
+ [0x0893] = 0x0080, /* R2195 - EQ3MIX Input 2 Volume */
+ [0x0894] = 0x0000, /* R2196 - EQ3MIX Input 3 Source */
+ [0x0895] = 0x0080, /* R2197 - EQ3MIX Input 3 Volume */
+ [0x0896] = 0x0000, /* R2198 - EQ3MIX Input 4 Source */
+ [0x0897] = 0x0080, /* R2199 - EQ3MIX Input 4 Volume */
+ [0x0898] = 0x0000, /* R2200 - EQ4MIX Input 1 Source */
+ [0x0899] = 0x0080, /* R2201 - EQ4MIX Input 1 Volume */
+ [0x089A] = 0x0000, /* R2202 - EQ4MIX Input 2 Source */
+ [0x089B] = 0x0080, /* R2203 - EQ4MIX Input 2 Volume */
+ [0x089C] = 0x0000, /* R2204 - EQ4MIX Input 3 Source */
+ [0x089D] = 0x0080, /* R2205 - EQ4MIX Input 3 Volume */
+ [0x089E] = 0x0000, /* R2206 - EQ4MIX Input 4 Source */
+ [0x089F] = 0x0080, /* R2207 - EQ4MIX Input 4 Volume */
+ [0x08C0] = 0x0000, /* R2240 - DRC1LMIX Input 1 Source */
+ [0x08C1] = 0x0080, /* R2241 - DRC1LMIX Input 1 Volume */
+ [0x08C2] = 0x0000, /* R2242 - DRC1LMIX Input 2 Source */
+ [0x08C3] = 0x0080, /* R2243 - DRC1LMIX Input 2 Volume */
+ [0x08C4] = 0x0000, /* R2244 - DRC1LMIX Input 3 Source */
+ [0x08C5] = 0x0080, /* R2245 - DRC1LMIX Input 3 Volume */
+ [0x08C6] = 0x0000, /* R2246 - DRC1LMIX Input 4 Source */
+ [0x08C7] = 0x0080, /* R2247 - DRC1LMIX Input 4 Volume */
+ [0x08C8] = 0x0000, /* R2248 - DRC1RMIX Input 1 Source */
+ [0x08C9] = 0x0080, /* R2249 - DRC1RMIX Input 1 Volume */
+ [0x08CA] = 0x0000, /* R2250 - DRC1RMIX Input 2 Source */
+ [0x08CB] = 0x0080, /* R2251 - DRC1RMIX Input 2 Volume */
+ [0x08CC] = 0x0000, /* R2252 - DRC1RMIX Input 3 Source */
+ [0x08CD] = 0x0080, /* R2253 - DRC1RMIX Input 3 Volume */
+ [0x08CE] = 0x0000, /* R2254 - DRC1RMIX Input 4 Source */
+ [0x08CF] = 0x0080, /* R2255 - DRC1RMIX Input 4 Volume */
+ [0x0900] = 0x0000, /* R2304 - HPLP1MIX Input 1 Source */
+ [0x0901] = 0x0080, /* R2305 - HPLP1MIX Input 1 Volume */
+ [0x0902] = 0x0000, /* R2306 - HPLP1MIX Input 2 Source */
+ [0x0903] = 0x0080, /* R2307 - HPLP1MIX Input 2 Volume */
+ [0x0904] = 0x0000, /* R2308 - HPLP1MIX Input 3 Source */
+ [0x0905] = 0x0080, /* R2309 - HPLP1MIX Input 3 Volume */
+ [0x0906] = 0x0000, /* R2310 - HPLP1MIX Input 4 Source */
+ [0x0907] = 0x0080, /* R2311 - HPLP1MIX Input 4 Volume */
+ [0x0908] = 0x0000, /* R2312 - HPLP2MIX Input 1 Source */
+ [0x0909] = 0x0080, /* R2313 - HPLP2MIX Input 1 Volume */
+ [0x090A] = 0x0000, /* R2314 - HPLP2MIX Input 2 Source */
+ [0x090B] = 0x0080, /* R2315 - HPLP2MIX Input 2 Volume */
+ [0x090C] = 0x0000, /* R2316 - HPLP2MIX Input 3 Source */
+ [0x090D] = 0x0080, /* R2317 - HPLP2MIX Input 3 Volume */
+ [0x090E] = 0x0000, /* R2318 - HPLP2MIX Input 4 Source */
+ [0x090F] = 0x0080, /* R2319 - HPLP2MIX Input 4 Volume */
+ [0x0910] = 0x0000, /* R2320 - HPLP3MIX Input 1 Source */
+ [0x0911] = 0x0080, /* R2321 - HPLP3MIX Input 1 Volume */
+ [0x0912] = 0x0000, /* R2322 - HPLP3MIX Input 2 Source */
+ [0x0913] = 0x0080, /* R2323 - HPLP3MIX Input 2 Volume */
+ [0x0914] = 0x0000, /* R2324 - HPLP3MIX Input 3 Source */
+ [0x0915] = 0x0080, /* R2325 - HPLP3MIX Input 3 Volume */
+ [0x0916] = 0x0000, /* R2326 - HPLP3MIX Input 4 Source */
+ [0x0917] = 0x0080, /* R2327 - HPLP3MIX Input 4 Volume */
+ [0x0918] = 0x0000, /* R2328 - HPLP4MIX Input 1 Source */
+ [0x0919] = 0x0080, /* R2329 - HPLP4MIX Input 1 Volume */
+ [0x091A] = 0x0000, /* R2330 - HPLP4MIX Input 2 Source */
+ [0x091B] = 0x0080, /* R2331 - HPLP4MIX Input 2 Volume */
+ [0x091C] = 0x0000, /* R2332 - HPLP4MIX Input 3 Source */
+ [0x091D] = 0x0080, /* R2333 - HPLP4MIX Input 3 Volume */
+ [0x091E] = 0x0000, /* R2334 - HPLP4MIX Input 4 Source */
+ [0x091F] = 0x0080, /* R2335 - HPLP4MIX Input 4 Volume */
+ [0x0940] = 0x0000, /* R2368 - DSP1LMIX Input 1 Source */
+ [0x0941] = 0x0080, /* R2369 - DSP1LMIX Input 1 Volume */
+ [0x0942] = 0x0000, /* R2370 - DSP1LMIX Input 2 Source */
+ [0x0943] = 0x0080, /* R2371 - DSP1LMIX Input 2 Volume */
+ [0x0944] = 0x0000, /* R2372 - DSP1LMIX Input 3 Source */
+ [0x0945] = 0x0080, /* R2373 - DSP1LMIX Input 3 Volume */
+ [0x0946] = 0x0000, /* R2374 - DSP1LMIX Input 4 Source */
+ [0x0947] = 0x0080, /* R2375 - DSP1LMIX Input 4 Volume */
+ [0x0948] = 0x0000, /* R2376 - DSP1RMIX Input 1 Source */
+ [0x0949] = 0x0080, /* R2377 - DSP1RMIX Input 1 Volume */
+ [0x094A] = 0x0000, /* R2378 - DSP1RMIX Input 2 Source */
+ [0x094B] = 0x0080, /* R2379 - DSP1RMIX Input 2 Volume */
+ [0x094C] = 0x0000, /* R2380 - DSP1RMIX Input 3 Source */
+ [0x094D] = 0x0080, /* R2381 - DSP1RMIX Input 3 Volume */
+ [0x094E] = 0x0000, /* R2382 - DSP1RMIX Input 4 Source */
+ [0x094F] = 0x0080, /* R2383 - DSP1RMIX Input 4 Volume */
+ [0x0950] = 0x0000, /* R2384 - DSP1AUX1MIX Input 1 Source */
+ [0x0958] = 0x0000, /* R2392 - DSP1AUX2MIX Input 1 Source */
+ [0x0960] = 0x0000, /* R2400 - DSP1AUX3MIX Input 1 Source */
+ [0x0968] = 0x0000, /* R2408 - DSP1AUX4MIX Input 1 Source */
+ [0x0970] = 0x0000, /* R2416 - DSP1AUX5MIX Input 1 Source */
+ [0x0978] = 0x0000, /* R2424 - DSP1AUX6MIX Input 1 Source */
+ [0x0980] = 0x0000, /* R2432 - DSP2LMIX Input 1 Source */
+ [0x0981] = 0x0080, /* R2433 - DSP2LMIX Input 1 Volume */
+ [0x0982] = 0x0000, /* R2434 - DSP2LMIX Input 2 Source */
+ [0x0983] = 0x0080, /* R2435 - DSP2LMIX Input 2 Volume */
+ [0x0984] = 0x0000, /* R2436 - DSP2LMIX Input 3 Source */
+ [0x0985] = 0x0080, /* R2437 - DSP2LMIX Input 3 Volume */
+ [0x0986] = 0x0000, /* R2438 - DSP2LMIX Input 4 Source */
+ [0x0987] = 0x0080, /* R2439 - DSP2LMIX Input 4 Volume */
+ [0x0988] = 0x0000, /* R2440 - DSP2RMIX Input 1 Source */
+ [0x0989] = 0x0080, /* R2441 - DSP2RMIX Input 1 Volume */
+ [0x098A] = 0x0000, /* R2442 - DSP2RMIX Input 2 Source */
+ [0x098B] = 0x0080, /* R2443 - DSP2RMIX Input 2 Volume */
+ [0x098C] = 0x0000, /* R2444 - DSP2RMIX Input 3 Source */
+ [0x098D] = 0x0080, /* R2445 - DSP2RMIX Input 3 Volume */
+ [0x098E] = 0x0000, /* R2446 - DSP2RMIX Input 4 Source */
+ [0x098F] = 0x0080, /* R2447 - DSP2RMIX Input 4 Volume */
+ [0x0990] = 0x0000, /* R2448 - DSP2AUX1MIX Input 1 Source */
+ [0x0998] = 0x0000, /* R2456 - DSP2AUX2MIX Input 1 Source */
+ [0x09A0] = 0x0000, /* R2464 - DSP2AUX3MIX Input 1 Source */
+ [0x09A8] = 0x0000, /* R2472 - DSP2AUX4MIX Input 1 Source */
+ [0x09B0] = 0x0000, /* R2480 - DSP2AUX5MIX Input 1 Source */
+ [0x09B8] = 0x0000, /* R2488 - DSP2AUX6MIX Input 1 Source */
+ [0x09C0] = 0x0000, /* R2496 - DSP3LMIX Input 1 Source */
+ [0x09C1] = 0x0080, /* R2497 - DSP3LMIX Input 1 Volume */
+ [0x09C2] = 0x0000, /* R2498 - DSP3LMIX Input 2 Source */
+ [0x09C3] = 0x0080, /* R2499 - DSP3LMIX Input 2 Volume */
+ [0x09C4] = 0x0000, /* R2500 - DSP3LMIX Input 3 Source */
+ [0x09C5] = 0x0080, /* R2501 - DSP3LMIX Input 3 Volume */
+ [0x09C6] = 0x0000, /* R2502 - DSP3LMIX Input 4 Source */
+ [0x09C7] = 0x0080, /* R2503 - DSP3LMIX Input 4 Volume */
+ [0x09C8] = 0x0000, /* R2504 - DSP3RMIX Input 1 Source */
+ [0x09C9] = 0x0080, /* R2505 - DSP3RMIX Input 1 Volume */
+ [0x09CA] = 0x0000, /* R2506 - DSP3RMIX Input 2 Source */
+ [0x09CB] = 0x0080, /* R2507 - DSP3RMIX Input 2 Volume */
+ [0x09CC] = 0x0000, /* R2508 - DSP3RMIX Input 3 Source */
+ [0x09CD] = 0x0080, /* R2509 - DSP3RMIX Input 3 Volume */
+ [0x09CE] = 0x0000, /* R2510 - DSP3RMIX Input 4 Source */
+ [0x09CF] = 0x0080, /* R2511 - DSP3RMIX Input 4 Volume */
+ [0x09D0] = 0x0000, /* R2512 - DSP3AUX1MIX Input 1 Source */
+ [0x09D8] = 0x0000, /* R2520 - DSP3AUX2MIX Input 1 Source */
+ [0x09E0] = 0x0000, /* R2528 - DSP3AUX3MIX Input 1 Source */
+ [0x09E8] = 0x0000, /* R2536 - DSP3AUX4MIX Input 1 Source */
+ [0x09F0] = 0x0000, /* R2544 - DSP3AUX5MIX Input 1 Source */
+ [0x09F8] = 0x0000, /* R2552 - DSP3AUX6MIX Input 1 Source */
+ [0x0A80] = 0x0000, /* R2688 - ASRC1LMIX Input 1 Source */
+ [0x0A88] = 0x0000, /* R2696 - ASRC1RMIX Input 1 Source */
+ [0x0A90] = 0x0000, /* R2704 - ASRC2LMIX Input 1 Source */
+ [0x0A98] = 0x0000, /* R2712 - ASRC2RMIX Input 1 Source */
+ [0x0B00] = 0x0000, /* R2816 - ISRC1DEC1MIX Input 1 Source */
+ [0x0B08] = 0x0000, /* R2824 - ISRC1DEC2MIX Input 1 Source */
+ [0x0B10] = 0x0000, /* R2832 - ISRC1DEC3MIX Input 1 Source */
+ [0x0B18] = 0x0000, /* R2840 - ISRC1DEC4MIX Input 1 Source */
+ [0x0B20] = 0x0000, /* R2848 - ISRC1INT1MIX Input 1 Source */
+ [0x0B28] = 0x0000, /* R2856 - ISRC1INT2MIX Input 1 Source */
+ [0x0B30] = 0x0000, /* R2864 - ISRC1INT3MIX Input 1 Source */
+ [0x0B38] = 0x0000, /* R2872 - ISRC1INT4MIX Input 1 Source */
+ [0x0B40] = 0x0000, /* R2880 - ISRC2DEC1MIX Input 1 Source */
+ [0x0B48] = 0x0000, /* R2888 - ISRC2DEC2MIX Input 1 Source */
+ [0x0B50] = 0x0000, /* R2896 - ISRC2DEC3MIX Input 1 Source */
+ [0x0B58] = 0x0000, /* R2904 - ISRC2DEC4MIX Input 1 Source */
+ [0x0B60] = 0x0000, /* R2912 - ISRC2INT1MIX Input 1 Source */
+ [0x0B68] = 0x0000, /* R2920 - ISRC2INT2MIX Input 1 Source */
+ [0x0B70] = 0x0000, /* R2928 - ISRC2INT3MIX Input 1 Source */
+ [0x0B78] = 0x0000, /* R2936 - ISRC2INT4MIX Input 1 Source */
+ [0x0C00] = 0xA001, /* R3072 - GPIO CTRL 1 */
+ [0x0C01] = 0xA001, /* R3073 - GPIO CTRL 2 */
+ [0x0C02] = 0xA001, /* R3074 - GPIO CTRL 3 */
+ [0x0C03] = 0xA001, /* R3075 - GPIO CTRL 4 */
+ [0x0C04] = 0xA001, /* R3076 - GPIO CTRL 5 */
+ [0x0C05] = 0xA001, /* R3077 - GPIO CTRL 6 */
+ [0x0C23] = 0x4003, /* R3107 - Misc Pad Ctrl 1 */
+ [0x0C24] = 0x0000, /* R3108 - Misc Pad Ctrl 2 */
+ [0x0C25] = 0x0000, /* R3109 - Misc Pad Ctrl 3 */
+ [0x0C26] = 0x0000, /* R3110 - Misc Pad Ctrl 4 */
+ [0x0C27] = 0x0000, /* R3111 - Misc Pad Ctrl 5 */
+ [0x0C28] = 0x0000, /* R3112 - Misc GPIO 1 */
+ [0x0D00] = 0x0000, /* R3328 - Interrupt Status 1 */
+ [0x0D01] = 0x0000, /* R3329 - Interrupt Status 2 */
+ [0x0D02] = 0x0000, /* R3330 - Interrupt Status 3 */
+ [0x0D03] = 0x0000, /* R3331 - Interrupt Status 4 */
+ [0x0D04] = 0x0000, /* R3332 - Interrupt Raw Status 2 */
+ [0x0D05] = 0x0000, /* R3333 - Interrupt Raw Status 3 */
+ [0x0D06] = 0x0000, /* R3334 - Interrupt Raw Status 4 */
+ [0x0D07] = 0xFFFF, /* R3335 - Interrupt Status 1 Mask */
+ [0x0D08] = 0xFFFF, /* R3336 - Interrupt Status 2 Mask */
+ [0x0D09] = 0xFFFF, /* R3337 - Interrupt Status 3 Mask */
+ [0x0D0A] = 0xFFFF, /* R3338 - Interrupt Status 4 Mask */
+ [0x0D1F] = 0x0000, /* R3359 - Interrupt Control */
+ [0x0D20] = 0xFFFF, /* R3360 - IRQ Debounce 1 */
+ [0x0D21] = 0xFFFF, /* R3361 - IRQ Debounce 2 */
+ [0x0E00] = 0x0000, /* R3584 - FX_Ctrl */
+ [0x0E10] = 0x6318, /* R3600 - EQ1_1 */
+ [0x0E11] = 0x6300, /* R3601 - EQ1_2 */
+ [0x0E12] = 0x0FC8, /* R3602 - EQ1_3 */
+ [0x0E13] = 0x03FE, /* R3603 - EQ1_4 */
+ [0x0E14] = 0x00E0, /* R3604 - EQ1_5 */
+ [0x0E15] = 0x1EC4, /* R3605 - EQ1_6 */
+ [0x0E16] = 0xF136, /* R3606 - EQ1_7 */
+ [0x0E17] = 0x0409, /* R3607 - EQ1_8 */
+ [0x0E18] = 0x04CC, /* R3608 - EQ1_9 */
+ [0x0E19] = 0x1C9B, /* R3609 - EQ1_10 */
+ [0x0E1A] = 0xF337, /* R3610 - EQ1_11 */
+ [0x0E1B] = 0x040B, /* R3611 - EQ1_12 */
+ [0x0E1C] = 0x0CBB, /* R3612 - EQ1_13 */
+ [0x0E1D] = 0x16F8, /* R3613 - EQ1_14 */
+ [0x0E1E] = 0xF7D9, /* R3614 - EQ1_15 */
+ [0x0E1F] = 0x040A, /* R3615 - EQ1_16 */
+ [0x0E20] = 0x1F14, /* R3616 - EQ1_17 */
+ [0x0E21] = 0x058C, /* R3617 - EQ1_18 */
+ [0x0E22] = 0x0563, /* R3618 - EQ1_19 */
+ [0x0E23] = 0x4000, /* R3619 - EQ1_20 */
+ [0x0E26] = 0x6318, /* R3622 - EQ2_1 */
+ [0x0E27] = 0x6300, /* R3623 - EQ2_2 */
+ [0x0E28] = 0x0FC8, /* R3624 - EQ2_3 */
+ [0x0E29] = 0x03FE, /* R3625 - EQ2_4 */
+ [0x0E2A] = 0x00E0, /* R3626 - EQ2_5 */
+ [0x0E2B] = 0x1EC4, /* R3627 - EQ2_6 */
+ [0x0E2C] = 0xF136, /* R3628 - EQ2_7 */
+ [0x0E2D] = 0x0409, /* R3629 - EQ2_8 */
+ [0x0E2E] = 0x04CC, /* R3630 - EQ2_9 */
+ [0x0E2F] = 0x1C9B, /* R3631 - EQ2_10 */
+ [0x0E30] = 0xF337, /* R3632 - EQ2_11 */
+ [0x0E31] = 0x040B, /* R3633 - EQ2_12 */
+ [0x0E32] = 0x0CBB, /* R3634 - EQ2_13 */
+ [0x0E33] = 0x16F8, /* R3635 - EQ2_14 */
+ [0x0E34] = 0xF7D9, /* R3636 - EQ2_15 */
+ [0x0E35] = 0x040A, /* R3637 - EQ2_16 */
+ [0x0E36] = 0x1F14, /* R3638 - EQ2_17 */
+ [0x0E37] = 0x058C, /* R3639 - EQ2_18 */
+ [0x0E38] = 0x0563, /* R3640 - EQ2_19 */
+ [0x0E39] = 0x4000, /* R3641 - EQ2_20 */
+ [0x0E3C] = 0x6318, /* R3644 - EQ3_1 */
+ [0x0E3D] = 0x6300, /* R3645 - EQ3_2 */
+ [0x0E3E] = 0x0FC8, /* R3646 - EQ3_3 */
+ [0x0E3F] = 0x03FE, /* R3647 - EQ3_4 */
+ [0x0E40] = 0x00E0, /* R3648 - EQ3_5 */
+ [0x0E41] = 0x1EC4, /* R3649 - EQ3_6 */
+ [0x0E42] = 0xF136, /* R3650 - EQ3_7 */
+ [0x0E43] = 0x0409, /* R3651 - EQ3_8 */
+ [0x0E44] = 0x04CC, /* R3652 - EQ3_9 */
+ [0x0E45] = 0x1C9B, /* R3653 - EQ3_10 */
+ [0x0E46] = 0xF337, /* R3654 - EQ3_11 */
+ [0x0E47] = 0x040B, /* R3655 - EQ3_12 */
+ [0x0E48] = 0x0CBB, /* R3656 - EQ3_13 */
+ [0x0E49] = 0x16F8, /* R3657 - EQ3_14 */
+ [0x0E4A] = 0xF7D9, /* R3658 - EQ3_15 */
+ [0x0E4B] = 0x040A, /* R3659 - EQ3_16 */
+ [0x0E4C] = 0x1F14, /* R3660 - EQ3_17 */
+ [0x0E4D] = 0x058C, /* R3661 - EQ3_18 */
+ [0x0E4E] = 0x0563, /* R3662 - EQ3_19 */
+ [0x0E4F] = 0x4000, /* R3663 - EQ3_20 */
+ [0x0E52] = 0x6318, /* R3666 - EQ4_1 */
+ [0x0E53] = 0x6300, /* R3667 - EQ4_2 */
+ [0x0E54] = 0x0FC8, /* R3668 - EQ4_3 */
+ [0x0E55] = 0x03FE, /* R3669 - EQ4_4 */
+ [0x0E56] = 0x00E0, /* R3670 - EQ4_5 */
+ [0x0E57] = 0x1EC4, /* R3671 - EQ4_6 */
+ [0x0E58] = 0xF136, /* R3672 - EQ4_7 */
+ [0x0E59] = 0x0409, /* R3673 - EQ4_8 */
+ [0x0E5A] = 0x04CC, /* R3674 - EQ4_9 */
+ [0x0E5B] = 0x1C9B, /* R3675 - EQ4_10 */
+ [0x0E5C] = 0xF337, /* R3676 - EQ4_11 */
+ [0x0E5D] = 0x040B, /* R3677 - EQ4_12 */
+ [0x0E5E] = 0x0CBB, /* R3678 - EQ4_13 */
+ [0x0E5F] = 0x16F8, /* R3679 - EQ4_14 */
+ [0x0E60] = 0xF7D9, /* R3680 - EQ4_15 */
+ [0x0E61] = 0x040A, /* R3681 - EQ4_16 */
+ [0x0E62] = 0x1F14, /* R3682 - EQ4_17 */
+ [0x0E63] = 0x058C, /* R3683 - EQ4_18 */
+ [0x0E64] = 0x0563, /* R3684 - EQ4_19 */
+ [0x0E65] = 0x4000, /* R3685 - EQ4_20 */
+ [0x0E80] = 0x0018, /* R3712 - DRC1 ctrl1 */
+ [0x0E81] = 0x0933, /* R3713 - DRC1 ctrl2 */
+ [0x0E82] = 0x0018, /* R3714 - DRC1 ctrl3 */
+ [0x0E83] = 0x0000, /* R3715 - DRC1 ctrl4 */
+ [0x0E84] = 0x0000, /* R3716 - DRC1 ctrl5 */
+ [0x0EC0] = 0x0000, /* R3776 - HPLPF1_1 */
+ [0x0EC1] = 0x0000, /* R3777 - HPLPF1_2 */
+ [0x0EC4] = 0x0000, /* R3780 - HPLPF2_1 */
+ [0x0EC5] = 0x0000, /* R3781 - HPLPF2_2 */
+ [0x0EC8] = 0x0000, /* R3784 - HPLPF3_1 */
+ [0x0EC9] = 0x0000, /* R3785 - HPLPF3_2 */
+ [0x0ECC] = 0x0000, /* R3788 - HPLPF4_1 */
+ [0x0ECD] = 0x0000, /* R3789 - HPLPF4_2 */
+ [0x4000] = 0x0000, /* R16384 - DSP1 DM 0 */
+ [0x4001] = 0x0000, /* R16385 - DSP1 DM 1 */
+ [0x4002] = 0x0000, /* R16386 - DSP1 DM 2 */
+ [0x4003] = 0x0000, /* R16387 - DSP1 DM 3 */
+ [0x41FC] = 0x0000, /* R16892 - DSP1 DM 508 */
+ [0x41FD] = 0x0000, /* R16893 - DSP1 DM 509 */
+ [0x41FE] = 0x0000, /* R16894 - DSP1 DM 510 */
+ [0x41FF] = 0x0000, /* R16895 - DSP1 DM 511 */
+ [0x4800] = 0x0000, /* R18432 - DSP1 PM 0 */
+ [0x4801] = 0x0000, /* R18433 - DSP1 PM 1 */
+ [0x4802] = 0x0000, /* R18434 - DSP1 PM 2 */
+ [0x4803] = 0x0000, /* R18435 - DSP1 PM 3 */
+ [0x4804] = 0x0000, /* R18436 - DSP1 PM 4 */
+ [0x4805] = 0x0000, /* R18437 - DSP1 PM 5 */
+ [0x4DFA] = 0x0000, /* R19962 - DSP1 PM 1530 */
+ [0x4DFB] = 0x0000, /* R19963 - DSP1 PM 1531 */
+ [0x4DFC] = 0x0000, /* R19964 - DSP1 PM 1532 */
+ [0x4DFD] = 0x0000, /* R19965 - DSP1 PM 1533 */
+ [0x4DFE] = 0x0000, /* R19966 - DSP1 PM 1534 */
+ [0x4DFF] = 0x0000, /* R19967 - DSP1 PM 1535 */
+ [0x5000] = 0x0000, /* R20480 - DSP1 ZM 0 */
+ [0x5001] = 0x0000, /* R20481 - DSP1 ZM 1 */
+ [0x5002] = 0x0000, /* R20482 - DSP1 ZM 2 */
+ [0x5003] = 0x0000, /* R20483 - DSP1 ZM 3 */
+ [0x57FC] = 0x0000, /* R22524 - DSP1 ZM 2044 */
+ [0x57FD] = 0x0000, /* R22525 - DSP1 ZM 2045 */
+ [0x57FE] = 0x0000, /* R22526 - DSP1 ZM 2046 */
+ [0x57FF] = 0x0000, /* R22527 - DSP1 ZM 2047 */
+ [0x6000] = 0x0000, /* R24576 - DSP2 DM 0 */
+ [0x6001] = 0x0000, /* R24577 - DSP2 DM 1 */
+ [0x6002] = 0x0000, /* R24578 - DSP2 DM 2 */
+ [0x6003] = 0x0000, /* R24579 - DSP2 DM 3 */
+ [0x61FC] = 0x0000, /* R25084 - DSP2 DM 508 */
+ [0x61FD] = 0x0000, /* R25085 - DSP2 DM 509 */
+ [0x61FE] = 0x0000, /* R25086 - DSP2 DM 510 */
+ [0x61FF] = 0x0000, /* R25087 - DSP2 DM 511 */
+ [0x6800] = 0x0000, /* R26624 - DSP2 PM 0 */
+ [0x6801] = 0x0000, /* R26625 - DSP2 PM 1 */
+ [0x6802] = 0x0000, /* R26626 - DSP2 PM 2 */
+ [0x6803] = 0x0000, /* R26627 - DSP2 PM 3 */
+ [0x6804] = 0x0000, /* R26628 - DSP2 PM 4 */
+ [0x6805] = 0x0000, /* R26629 - DSP2 PM 5 */
+ [0x6DFA] = 0x0000, /* R28154 - DSP2 PM 1530 */
+ [0x6DFB] = 0x0000, /* R28155 - DSP2 PM 1531 */
+ [0x6DFC] = 0x0000, /* R28156 - DSP2 PM 1532 */
+ [0x6DFD] = 0x0000, /* R28157 - DSP2 PM 1533 */
+ [0x6DFE] = 0x0000, /* R28158 - DSP2 PM 1534 */
+ [0x6DFF] = 0x0000, /* R28159 - DSP2 PM 1535 */
+ [0x7000] = 0x0000, /* R28672 - DSP2 ZM 0 */
+ [0x7001] = 0x0000, /* R28673 - DSP2 ZM 1 */
+ [0x7002] = 0x0000, /* R28674 - DSP2 ZM 2 */
+ [0x7003] = 0x0000, /* R28675 - DSP2 ZM 3 */
+ [0x77FC] = 0x0000, /* R30716 - DSP2 ZM 2044 */
+ [0x77FD] = 0x0000, /* R30717 - DSP2 ZM 2045 */
+ [0x77FE] = 0x0000, /* R30718 - DSP2 ZM 2046 */
+ [0x77FF] = 0x0000, /* R30719 - DSP2 ZM 2047 */
+ [0x8000] = 0x0000, /* R32768 - DSP3 DM 0 */
+ [0x8001] = 0x0000, /* R32769 - DSP3 DM 1 */
+ [0x8002] = 0x0000, /* R32770 - DSP3 DM 2 */
+ [0x8003] = 0x0000, /* R32771 - DSP3 DM 3 */
+ [0x81FC] = 0x0000, /* R33276 - DSP3 DM 508 */
+ [0x81FD] = 0x0000, /* R33277 - DSP3 DM 509 */
+ [0x81FE] = 0x0000, /* R33278 - DSP3 DM 510 */
+ [0x81FF] = 0x0000, /* R33279 - DSP3 DM 511 */
+ [0x8800] = 0x0000, /* R34816 - DSP3 PM 0 */
+ [0x8801] = 0x0000, /* R34817 - DSP3 PM 1 */
+ [0x8802] = 0x0000, /* R34818 - DSP3 PM 2 */
+ [0x8803] = 0x0000, /* R34819 - DSP3 PM 3 */
+ [0x8804] = 0x0000, /* R34820 - DSP3 PM 4 */
+ [0x8805] = 0x0000, /* R34821 - DSP3 PM 5 */
+ [0x8DFA] = 0x0000, /* R36346 - DSP3 PM 1530 */
+ [0x8DFB] = 0x0000, /* R36347 - DSP3 PM 1531 */
+ [0x8DFC] = 0x0000, /* R36348 - DSP3 PM 1532 */
+ [0x8DFD] = 0x0000, /* R36349 - DSP3 PM 1533 */
+ [0x8DFE] = 0x0000, /* R36350 - DSP3 PM 1534 */
+ [0x8DFF] = 0x0000, /* R36351 - DSP3 PM 1535 */
+ [0x9000] = 0x0000, /* R36864 - DSP3 ZM 0 */
+ [0x9001] = 0x0000, /* R36865 - DSP3 ZM 1 */
+ [0x9002] = 0x0000, /* R36866 - DSP3 ZM 2 */
+ [0x9003] = 0x0000, /* R36867 - DSP3 ZM 3 */
+ [0x97FC] = 0x0000, /* R38908 - DSP3 ZM 2044 */
+ [0x97FD] = 0x0000, /* R38909 - DSP3 ZM 2045 */
+ [0x97FE] = 0x0000, /* R38910 - DSP3 ZM 2046 */
+ [0x97FF] = 0x0000 /* R38911 - DSP3 ZM 2047 */
+};
diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
new file mode 100644
index 0000000..5d88c99
--- /dev/null
+++ b/sound/soc/codecs/wm5100.c
@@ -0,0 +1,2809 @@
+/*
+ * wm5100.c -- WM5100 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/gcd.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/fixed.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/wm5100.h>
+
+#include "wm5100.h"
+
+#define WM5100_NUM_CORE_SUPPLIES 2
+static const char *wm5100_core_supply_names[WM5100_NUM_CORE_SUPPLIES] = {
+ "DBVDD1",
+ "LDOVDD", /* If DCVDD is supplied externally specify as LDOVDD */
+};
+
+#define WM5100_AIFS 3
+#define WM5100_SYNC_SRS 3
+
+struct wm5100_fll {
+ int fref;
+ int fout;
+ int src;
+ struct completion lock;
+};
+
+/* codec private data */
+struct wm5100_priv {
+ struct snd_soc_codec *codec;
+
+ struct regulator_bulk_data core_supplies[WM5100_NUM_CORE_SUPPLIES];
+ struct regulator *cpvdd;
+ struct regulator *dbvdd2;
+ struct regulator *dbvdd3;
+
+ int rev;
+
+ int sysclk;
+ int asyncclk;
+
+ bool aif_async[WM5100_AIFS];
+ bool aif_symmetric[WM5100_AIFS];
+ int sr_ref[WM5100_SYNC_SRS];
+
+ bool out_ena[2];
+
+ struct snd_soc_jack *jack;
+ bool jack_detecting;
+ bool jack_mic;
+ int jack_mode;
+
+ struct wm5100_fll fll[2];
+
+ struct wm5100_pdata pdata;
+
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio_chip;
+#endif
+};
+
+static int wm5100_sr_code[] = {
+ 0,
+ 12000,
+ 24000,
+ 48000,
+ 96000,
+ 192000,
+ 384000,
+ 768000,
+ 0,
+ 11025,
+ 22050,
+ 44100,
+ 88200,
+ 176400,
+ 352800,
+ 705600,
+ 4000,
+ 8000,
+ 16000,
+ 32000,
+ 64000,
+ 128000,
+ 256000,
+ 512000,
+};
+
+static int wm5100_sr_regs[WM5100_SYNC_SRS] = {
+ WM5100_CLOCKING_4,
+ WM5100_CLOCKING_5,
+ WM5100_CLOCKING_6,
+};
+
+static int wm5100_alloc_sr(struct snd_soc_codec *codec, int rate)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int sr_code, sr_free, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm5100_sr_code); i++)
+ if (wm5100_sr_code[i] == rate)
+ break;
+ if (i == ARRAY_SIZE(wm5100_sr_code)) {
+ dev_err(codec->dev, "Unsupported sample rate: %dHz\n", rate);
+ return -EINVAL;
+ }
+ sr_code = i;
+
+ if ((wm5100->sysclk % rate) == 0) {
+ /* Is this rate already in use? */
+ sr_free = -1;
+ for (i = 0; i < ARRAY_SIZE(wm5100_sr_regs); i++) {
+ if (!wm5100->sr_ref[i] && sr_free == -1) {
+ sr_free = i;
+ continue;
+ }
+ if ((snd_soc_read(codec, wm5100_sr_regs[i]) &
+ WM5100_SAMPLE_RATE_1_MASK) == sr_code)
+ break;
+ }
+
+ if (i < ARRAY_SIZE(wm5100_sr_regs)) {
+ wm5100->sr_ref[i]++;
+ dev_dbg(codec->dev, "SR %dHz, slot %d, ref %d\n",
+ rate, i, wm5100->sr_ref[i]);
+ return i;
+ }
+
+ if (sr_free == -1) {
+ dev_err(codec->dev, "All SR slots already in use\n");
+ return -EBUSY;
+ }
+
+ dev_dbg(codec->dev, "Allocating SR slot %d for %dHz\n",
+ sr_free, rate);
+ wm5100->sr_ref[sr_free]++;
+ snd_soc_update_bits(codec, wm5100_sr_regs[sr_free],
+ WM5100_SAMPLE_RATE_1_MASK,
+ sr_code);
+
+ return sr_free;
+
+ } else {
+ dev_err(codec->dev,
+ "SR %dHz incompatible with %dHz SYSCLK and %dHz ASYNCCLK\n",
+ rate, wm5100->sysclk, wm5100->asyncclk);
+ return -EINVAL;
+ }
+}
+
+static void wm5100_free_sr(struct snd_soc_codec *codec, int rate)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int i, sr_code;
+
+ for (i = 0; i < ARRAY_SIZE(wm5100_sr_code); i++)
+ if (wm5100_sr_code[i] == rate)
+ break;
+ if (i == ARRAY_SIZE(wm5100_sr_code)) {
+ dev_err(codec->dev, "Unsupported sample rate: %dHz\n", rate);
+ return;
+ }
+ sr_code = wm5100_sr_code[i];
+
+ for (i = 0; i < ARRAY_SIZE(wm5100_sr_regs); i++) {
+ if (!wm5100->sr_ref[i])
+ continue;
+
+ if ((snd_soc_read(codec, wm5100_sr_regs[i]) &
+ WM5100_SAMPLE_RATE_1_MASK) == sr_code)
+ break;
+ }
+ if (i < ARRAY_SIZE(wm5100_sr_regs)) {
+ wm5100->sr_ref[i]--;
+ dev_dbg(codec->dev, "Dereference SR %dHz, count now %d\n",
+ rate, wm5100->sr_ref[i]);
+ } else {
+ dev_warn(codec->dev, "Freeing unreferenced sample rate %dHz\n",
+ rate);
+ }
+}
+
+static int wm5100_reset(struct snd_soc_codec *codec)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+
+ if (wm5100->pdata.reset) {
+ gpio_set_value_cansleep(wm5100->pdata.reset, 0);
+ gpio_set_value_cansleep(wm5100->pdata.reset, 1);
+
+ return 0;
+ } else {
+ return snd_soc_write(codec, WM5100_SOFTWARE_RESET, 0);
+ }
+}
+
+static DECLARE_TLV_DB_SCALE(in_tlv, -6300, 100, 0);
+static DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static DECLARE_TLV_DB_SCALE(mixer_tlv, -3200, 100, 0);
+static DECLARE_TLV_DB_SCALE(out_tlv, -6400, 100, 0);
+static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0);
+
+static const char *wm5100_mixer_texts[] = {
+ "None",
+ "Tone Generator 1",
+ "Tone Generator 2",
+ "AEC loopback",
+ "IN1L",
+ "IN1R",
+ "IN2L",
+ "IN2R",
+ "IN3L",
+ "IN3R",
+ "IN4L",
+ "IN4R",
+ "AIF1RX1",
+ "AIF1RX2",
+ "AIF1RX3",
+ "AIF1RX4",
+ "AIF1RX5",
+ "AIF1RX6",
+ "AIF1RX7",
+ "AIF1RX8",
+ "AIF2RX1",
+ "AIF2RX2",
+ "AIF3RX1",
+ "AIF3RX2",
+ "EQ1",
+ "EQ2",
+ "EQ3",
+ "EQ4",
+ "DRC1L",
+ "DRC1R",
+ "LHPF1",
+ "LHPF2",
+ "LHPF3",
+ "LHPF4",
+ "DSP1.1",
+ "DSP1.2",
+ "DSP1.3",
+ "DSP1.4",
+ "DSP1.5",
+ "DSP1.6",
+ "DSP2.1",
+ "DSP2.2",
+ "DSP2.3",
+ "DSP2.4",
+ "DSP2.5",
+ "DSP2.6",
+ "DSP3.1",
+ "DSP3.2",
+ "DSP3.3",
+ "DSP3.4",
+ "DSP3.5",
+ "DSP3.6",
+ "ASRC1L",
+ "ASRC1R",
+ "ASRC2L",
+ "ASRC2R",
+ "ISRC1INT1",
+ "ISRC1INT2",
+ "ISRC1INT3",
+ "ISRC1INT4",
+ "ISRC2INT1",
+ "ISRC2INT2",
+ "ISRC2INT3",
+ "ISRC2INT4",
+ "ISRC1DEC1",
+ "ISRC1DEC2",
+ "ISRC1DEC3",
+ "ISRC1DEC4",
+ "ISRC2DEC1",
+ "ISRC2DEC2",
+ "ISRC2DEC3",
+ "ISRC2DEC4",
+};
+
+static int wm5100_mixer_values[] = {
+ 0x00,
+ 0x04, /* Tone */
+ 0x05,
+ 0x08, /* AEC */
+ 0x10, /* Input */
+ 0x11,
+ 0x12,
+ 0x13,
+ 0x14,
+ 0x15,
+ 0x16,
+ 0x17,
+ 0x20, /* AIF */
+ 0x21,
+ 0x22,
+ 0x23,
+ 0x24,
+ 0x25,
+ 0x26,
+ 0x27,
+ 0x28,
+ 0x29,
+ 0x30, /* AIF3 - check */
+ 0x31,
+ 0x50, /* EQ */
+ 0x51,
+ 0x52,
+ 0x53,
+ 0x54,
+ 0x58, /* DRC */
+ 0x59,
+ 0x60, /* LHPF1 */
+ 0x61, /* LHPF2 */
+ 0x62, /* LHPF3 */
+ 0x63, /* LHPF4 */
+ 0x68, /* DSP1 */
+ 0x69,
+ 0x6a,
+ 0x6b,
+ 0x6c,
+ 0x6d,
+ 0x70, /* DSP2 */
+ 0x71,
+ 0x72,
+ 0x73,
+ 0x74,
+ 0x75,
+ 0x78, /* DSP3 */
+ 0x79,
+ 0x7a,
+ 0x7b,
+ 0x7c,
+ 0x7d,
+ 0x90, /* ASRC1 */
+ 0x91,
+ 0x92, /* ASRC2 */
+ 0x93,
+ 0xa0, /* ISRC1DEC1 */
+ 0xa1,
+ 0xa2,
+ 0xa3,
+ 0xa4, /* ISRC1INT1 */
+ 0xa5,
+ 0xa6,
+ 0xa7,
+ 0xa8, /* ISRC2DEC1 */
+ 0xa9,
+ 0xaa,
+ 0xab,
+ 0xac, /* ISRC2INT1 */
+ 0xad,
+ 0xae,
+ 0xaf,
+};
+
+#define WM5100_MIXER_CONTROLS(name, base) \
+ SOC_SINGLE_TLV(name " Input 1 Volume", base + 1 , \
+ WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv), \
+ SOC_SINGLE_TLV(name " Input 2 Volume", base + 3 , \
+ WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv), \
+ SOC_SINGLE_TLV(name " Input 3 Volume", base + 5 , \
+ WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv), \
+ SOC_SINGLE_TLV(name " Input 4 Volume", base + 7 , \
+ WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv)
+
+#define WM5100_MUX_ENUM_DECL(name, reg) \
+ SOC_VALUE_ENUM_SINGLE_DECL(name, reg, 0, 0xff, \
+ wm5100_mixer_texts, wm5100_mixer_values)
+
+#define WM5100_MUX_CTL_DECL(name) \
+ const struct snd_kcontrol_new name##_mux = \
+ SOC_DAPM_VALUE_ENUM("Route", name##_enum)
+
+#define WM5100_MIXER_ENUMS(name, base_reg) \
+ static WM5100_MUX_ENUM_DECL(name##_in1_enum, base_reg); \
+ static WM5100_MUX_ENUM_DECL(name##_in2_enum, base_reg + 2); \
+ static WM5100_MUX_ENUM_DECL(name##_in3_enum, base_reg + 4); \
+ static WM5100_MUX_ENUM_DECL(name##_in4_enum, base_reg + 6); \
+ static WM5100_MUX_CTL_DECL(name##_in1); \
+ static WM5100_MUX_CTL_DECL(name##_in2); \
+ static WM5100_MUX_CTL_DECL(name##_in3); \
+ static WM5100_MUX_CTL_DECL(name##_in4)
+
+WM5100_MIXER_ENUMS(HPOUT1L, WM5100_OUT1LMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(HPOUT1R, WM5100_OUT1RMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(HPOUT2L, WM5100_OUT2LMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(HPOUT2R, WM5100_OUT2RMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(HPOUT3L, WM5100_OUT3LMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(HPOUT3R, WM5100_OUT3RMIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(SPKOUTL, WM5100_OUT4LMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(SPKOUTR, WM5100_OUT4RMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(SPKDAT1L, WM5100_OUT5LMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(SPKDAT1R, WM5100_OUT5RMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(SPKDAT2L, WM5100_OUT6LMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(SPKDAT2R, WM5100_OUT6RMIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(PWM1, WM5100_PWM1MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(PWM2, WM5100_PWM1MIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(AIF1TX1, WM5100_AIF1TX1MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF1TX2, WM5100_AIF1TX2MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF1TX3, WM5100_AIF1TX3MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF1TX4, WM5100_AIF1TX4MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF1TX5, WM5100_AIF1TX5MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF1TX6, WM5100_AIF1TX6MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF1TX7, WM5100_AIF1TX7MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF1TX8, WM5100_AIF1TX8MIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(AIF2TX1, WM5100_AIF2TX1MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF2TX2, WM5100_AIF2TX2MIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(AIF3TX1, WM5100_AIF1TX1MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(AIF3TX2, WM5100_AIF1TX2MIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(EQ1, WM5100_EQ1MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(EQ2, WM5100_EQ2MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(EQ3, WM5100_EQ3MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(EQ4, WM5100_EQ4MIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(DRC1L, WM5100_DRC1LMIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(DRC1R, WM5100_DRC1RMIX_INPUT_1_SOURCE);
+
+WM5100_MIXER_ENUMS(LHPF1, WM5100_HPLP1MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(LHPF2, WM5100_HPLP2MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(LHPF3, WM5100_HPLP3MIX_INPUT_1_SOURCE);
+WM5100_MIXER_ENUMS(LHPF4, WM5100_HPLP4MIX_INPUT_1_SOURCE);
+
+#define WM5100_MUX(name, ctrl) \
+ SND_SOC_DAPM_VALUE_MUX(name, SND_SOC_NOPM, 0, 0, ctrl)
+
+#define WM5100_MIXER_WIDGETS(name, name_str) \
+ WM5100_MUX(name_str " Input 1", &name##_in1_mux), \
+ WM5100_MUX(name_str " Input 2", &name##_in2_mux), \
+ WM5100_MUX(name_str " Input 3", &name##_in3_mux), \
+ WM5100_MUX(name_str " Input 4", &name##_in4_mux), \
+ SND_SOC_DAPM_MIXER(name_str " Mixer", SND_SOC_NOPM, 0, 0, NULL, 0)
+
+#define WM5100_MIXER_INPUT_ROUTES(name) \
+ { name, "Tone Generator 1", "Tone Generator 1" }, \
+ { name, "Tone Generator 2", "Tone Generator 2" }, \
+ { name, "IN1L", "IN1L PGA" }, \
+ { name, "IN1R", "IN1R PGA" }, \
+ { name, "IN2L", "IN2L PGA" }, \
+ { name, "IN2R", "IN2R PGA" }, \
+ { name, "IN3L", "IN3L PGA" }, \
+ { name, "IN3R", "IN3R PGA" }, \
+ { name, "IN4L", "IN4L PGA" }, \
+ { name, "IN4R", "IN4R PGA" }, \
+ { name, "AIF1RX1", "AIF1RX1" }, \
+ { name, "AIF1RX2", "AIF1RX2" }, \
+ { name, "AIF1RX3", "AIF1RX3" }, \
+ { name, "AIF1RX4", "AIF1RX4" }, \
+ { name, "AIF1RX5", "AIF1RX5" }, \
+ { name, "AIF1RX6", "AIF1RX6" }, \
+ { name, "AIF1RX7", "AIF1RX7" }, \
+ { name, "AIF1RX8", "AIF1RX8" }, \
+ { name, "AIF2RX1", "AIF2RX1" }, \
+ { name, "AIF2RX2", "AIF2RX2" }, \
+ { name, "AIF3RX1", "AIF3RX1" }, \
+ { name, "AIF3RX2", "AIF3RX2" }, \
+ { name, "EQ1", "EQ1" }, \
+ { name, "EQ2", "EQ2" }, \
+ { name, "EQ3", "EQ3" }, \
+ { name, "EQ4", "EQ4" }, \
+ { name, "DRC1L", "DRC1L" }, \
+ { name, "DRC1R", "DRC1R" }, \
+ { name, "LHPF1", "LHPF1" }, \
+ { name, "LHPF2", "LHPF2" }, \
+ { name, "LHPF3", "LHPF3" }, \
+ { name, "LHPF4", "LHPF4" }
+
+#define WM5100_MIXER_ROUTES(widget, name) \
+ { widget, NULL, name " Mixer" }, \
+ { name " Mixer", NULL, name " Input 1" }, \
+ { name " Mixer", NULL, name " Input 2" }, \
+ { name " Mixer", NULL, name " Input 3" }, \
+ { name " Mixer", NULL, name " Input 4" }, \
+ WM5100_MIXER_INPUT_ROUTES(name " Input 1"), \
+ WM5100_MIXER_INPUT_ROUTES(name " Input 2"), \
+ WM5100_MIXER_INPUT_ROUTES(name " Input 3"), \
+ WM5100_MIXER_INPUT_ROUTES(name " Input 4")
+
+static const char *wm5100_lhpf_mode_text[] = {
+ "Low-pass", "High-pass"
+};
+
+static const struct soc_enum wm5100_lhpf1_mode =
+ SOC_ENUM_SINGLE(WM5100_HPLPF1_1, WM5100_LHPF1_MODE_SHIFT, 2,
+ wm5100_lhpf_mode_text);
+
+static const struct soc_enum wm5100_lhpf2_mode =
+ SOC_ENUM_SINGLE(WM5100_HPLPF2_1, WM5100_LHPF2_MODE_SHIFT, 2,
+ wm5100_lhpf_mode_text);
+
+static const struct soc_enum wm5100_lhpf3_mode =
+ SOC_ENUM_SINGLE(WM5100_HPLPF3_1, WM5100_LHPF3_MODE_SHIFT, 2,
+ wm5100_lhpf_mode_text);
+
+static const struct soc_enum wm5100_lhpf4_mode =
+ SOC_ENUM_SINGLE(WM5100_HPLPF4_1, WM5100_LHPF4_MODE_SHIFT, 2,
+ wm5100_lhpf_mode_text);
+
+static const struct snd_kcontrol_new wm5100_snd_controls[] = {
+SOC_SINGLE("IN1 High Performance Switch", WM5100_IN1L_CONTROL,
+ WM5100_IN1_OSR_SHIFT, 1, 0),
+SOC_SINGLE("IN2 High Performance Switch", WM5100_IN2L_CONTROL,
+ WM5100_IN2_OSR_SHIFT, 1, 0),
+SOC_SINGLE("IN3 High Performance Switch", WM5100_IN3L_CONTROL,
+ WM5100_IN3_OSR_SHIFT, 1, 0),
+SOC_SINGLE("IN4 High Performance Switch", WM5100_IN4L_CONTROL,
+ WM5100_IN4_OSR_SHIFT, 1, 0),
+
+/* Only applicable for analogue inputs */
+SOC_DOUBLE_R_TLV("IN1 Volume", WM5100_IN1L_CONTROL, WM5100_IN1R_CONTROL,
+ WM5100_IN1L_PGA_VOL_SHIFT, 94, 0, in_tlv),
+SOC_DOUBLE_R_TLV("IN2 Volume", WM5100_IN2L_CONTROL, WM5100_IN2R_CONTROL,
+ WM5100_IN2L_PGA_VOL_SHIFT, 94, 0, in_tlv),
+SOC_DOUBLE_R_TLV("IN3 Volume", WM5100_IN3L_CONTROL, WM5100_IN3R_CONTROL,
+ WM5100_IN3L_PGA_VOL_SHIFT, 94, 0, in_tlv),
+SOC_DOUBLE_R_TLV("IN4 Volume", WM5100_IN4L_CONTROL, WM5100_IN4R_CONTROL,
+ WM5100_IN4L_PGA_VOL_SHIFT, 94, 0, in_tlv),
+
+SOC_DOUBLE_R_TLV("IN1 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_1L,
+ WM5100_ADC_DIGITAL_VOLUME_1R, WM5100_IN1L_VOL_SHIFT, 191,
+ 0, digital_tlv),
+SOC_DOUBLE_R_TLV("IN2 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_2L,
+ WM5100_ADC_DIGITAL_VOLUME_2R, WM5100_IN2L_VOL_SHIFT, 191,
+ 0, digital_tlv),
+SOC_DOUBLE_R_TLV("IN3 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_3L,
+ WM5100_ADC_DIGITAL_VOLUME_3R, WM5100_IN3L_VOL_SHIFT, 191,
+ 0, digital_tlv),
+SOC_DOUBLE_R_TLV("IN4 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_4L,
+ WM5100_ADC_DIGITAL_VOLUME_4R, WM5100_IN4L_VOL_SHIFT, 191,
+ 0, digital_tlv),
+
+SOC_DOUBLE_R("IN1 Switch", WM5100_ADC_DIGITAL_VOLUME_1L,
+ WM5100_ADC_DIGITAL_VOLUME_1R, WM5100_IN1L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("IN2 Switch", WM5100_ADC_DIGITAL_VOLUME_2L,
+ WM5100_ADC_DIGITAL_VOLUME_2R, WM5100_IN2L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("IN3 Switch", WM5100_ADC_DIGITAL_VOLUME_3L,
+ WM5100_ADC_DIGITAL_VOLUME_3R, WM5100_IN3L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("IN4 Switch", WM5100_ADC_DIGITAL_VOLUME_4L,
+ WM5100_ADC_DIGITAL_VOLUME_4R, WM5100_IN4L_MUTE_SHIFT, 1, 1),
+
+SOC_SINGLE("HPOUT1 High Performance Switch", WM5100_OUT_VOLUME_1L,
+ WM5100_OUT1_OSR_SHIFT, 1, 0),
+SOC_SINGLE("HPOUT2 High Performance Switch", WM5100_OUT_VOLUME_2L,
+ WM5100_OUT2_OSR_SHIFT, 1, 0),
+SOC_SINGLE("HPOUT3 High Performance Switch", WM5100_OUT_VOLUME_3L,
+ WM5100_OUT3_OSR_SHIFT, 1, 0),
+SOC_SINGLE("SPKOUT High Performance Switch", WM5100_OUT_VOLUME_4L,
+ WM5100_OUT4_OSR_SHIFT, 1, 0),
+SOC_SINGLE("SPKDAT1 High Performance Switch", WM5100_DAC_VOLUME_LIMIT_5L,
+ WM5100_OUT5_OSR_SHIFT, 1, 0),
+SOC_SINGLE("SPKDAT2 High Performance Switch", WM5100_DAC_VOLUME_LIMIT_6L,
+ WM5100_OUT6_OSR_SHIFT, 1, 0),
+
+SOC_DOUBLE_R_TLV("HPOUT1 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_1L,
+ WM5100_DAC_DIGITAL_VOLUME_1R, WM5100_OUT1L_VOL_SHIFT, 159, 0,
+ digital_tlv),
+SOC_DOUBLE_R_TLV("HPOUT2 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_2L,
+ WM5100_DAC_DIGITAL_VOLUME_2R, WM5100_OUT2L_VOL_SHIFT, 159, 0,
+ digital_tlv),
+SOC_DOUBLE_R_TLV("HPOUT3 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_3L,
+ WM5100_DAC_DIGITAL_VOLUME_3R, WM5100_OUT3L_VOL_SHIFT, 159, 0,
+ digital_tlv),
+SOC_DOUBLE_R_TLV("SPKOUT Digital Volume", WM5100_DAC_DIGITAL_VOLUME_4L,
+ WM5100_DAC_DIGITAL_VOLUME_4R, WM5100_OUT4L_VOL_SHIFT, 159, 0,
+ digital_tlv),
+SOC_DOUBLE_R_TLV("SPKDAT1 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_5L,
+ WM5100_DAC_DIGITAL_VOLUME_5R, WM5100_OUT5L_VOL_SHIFT, 159, 0,
+ digital_tlv),
+SOC_DOUBLE_R_TLV("SPKDAT2 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_6L,
+ WM5100_DAC_DIGITAL_VOLUME_6R, WM5100_OUT6L_VOL_SHIFT, 159, 0,
+ digital_tlv),
+
+SOC_DOUBLE_R("HPOUT1 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_1L,
+ WM5100_DAC_DIGITAL_VOLUME_1R, WM5100_OUT1L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("HPOUT2 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_2L,
+ WM5100_DAC_DIGITAL_VOLUME_2R, WM5100_OUT2L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("HPOUT3 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_3L,
+ WM5100_DAC_DIGITAL_VOLUME_3R, WM5100_OUT3L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("SPKOUT Digital Switch", WM5100_DAC_DIGITAL_VOLUME_4L,
+ WM5100_DAC_DIGITAL_VOLUME_4R, WM5100_OUT4L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("SPKDAT1 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_5L,
+ WM5100_DAC_DIGITAL_VOLUME_5R, WM5100_OUT5L_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE_R("SPKDAT2 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_6L,
+ WM5100_DAC_DIGITAL_VOLUME_6R, WM5100_OUT6L_MUTE_SHIFT, 1, 1),
+
+/* FIXME: Only valid from -12dB to 0dB (52-64) */
+SOC_DOUBLE_R_TLV("HPOUT1 Volume", WM5100_OUT_VOLUME_1L, WM5100_OUT_VOLUME_1R,
+ WM5100_OUT1L_PGA_VOL_SHIFT, 64, 0, out_tlv),
+SOC_DOUBLE_R_TLV("HPOUT2 Volume", WM5100_OUT_VOLUME_2L, WM5100_OUT_VOLUME_2R,
+ WM5100_OUT2L_PGA_VOL_SHIFT, 64, 0, out_tlv),
+SOC_DOUBLE_R_TLV("HPOUT3 Volume", WM5100_OUT_VOLUME_3L, WM5100_OUT_VOLUME_3R,
+ WM5100_OUT2L_PGA_VOL_SHIFT, 64, 0, out_tlv),
+
+SOC_DOUBLE("SPKDAT1 Switch", WM5100_PDM_SPK1_CTRL_1, WM5100_SPK1L_MUTE_SHIFT,
+ WM5100_SPK1R_MUTE_SHIFT, 1, 1),
+SOC_DOUBLE("SPKDAT2 Switch", WM5100_PDM_SPK2_CTRL_1, WM5100_SPK2L_MUTE_SHIFT,
+ WM5100_SPK2R_MUTE_SHIFT, 1, 1),
+
+SOC_SINGLE_TLV("EQ1 Band 1 Volume", WM5100_EQ1_1, WM5100_EQ1_B1_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ1 Band 2 Volume", WM5100_EQ1_1, WM5100_EQ1_B2_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ1 Band 3 Volume", WM5100_EQ1_1, WM5100_EQ1_B3_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ1 Band 4 Volume", WM5100_EQ1_2, WM5100_EQ1_B4_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ1 Band 5 Volume", WM5100_EQ1_2, WM5100_EQ1_B5_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+
+SOC_SINGLE_TLV("EQ2 Band 1 Volume", WM5100_EQ2_1, WM5100_EQ2_B1_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Band 2 Volume", WM5100_EQ2_1, WM5100_EQ2_B2_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Band 3 Volume", WM5100_EQ2_1, WM5100_EQ2_B3_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Band 4 Volume", WM5100_EQ2_2, WM5100_EQ2_B4_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Band 5 Volume", WM5100_EQ2_2, WM5100_EQ2_B5_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+
+SOC_SINGLE_TLV("EQ3 Band 1 Volume", WM5100_EQ1_1, WM5100_EQ3_B1_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Band 2 Volume", WM5100_EQ3_1, WM5100_EQ3_B2_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Band 3 Volume", WM5100_EQ3_1, WM5100_EQ3_B3_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Band 4 Volume", WM5100_EQ3_2, WM5100_EQ3_B4_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Band 5 Volume", WM5100_EQ3_2, WM5100_EQ3_B5_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+
+SOC_SINGLE_TLV("EQ4 Band 1 Volume", WM5100_EQ4_1, WM5100_EQ4_B1_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Band 2 Volume", WM5100_EQ4_1, WM5100_EQ4_B2_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Band 3 Volume", WM5100_EQ4_1, WM5100_EQ4_B3_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Band 4 Volume", WM5100_EQ4_2, WM5100_EQ4_B4_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Band 5 Volume", WM5100_EQ4_2, WM5100_EQ4_B5_GAIN_SHIFT,
+ 24, 0, eq_tlv),
+
+SOC_ENUM("LHPF1 Mode", wm5100_lhpf1_mode),
+SOC_ENUM("LHPF2 Mode", wm5100_lhpf2_mode),
+SOC_ENUM("LHPF3 Mode", wm5100_lhpf3_mode),
+SOC_ENUM("LHPF4 Mode", wm5100_lhpf4_mode),
+
+WM5100_MIXER_CONTROLS("HPOUT1L", WM5100_OUT1LMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("HPOUT1R", WM5100_OUT1RMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("HPOUT2L", WM5100_OUT2LMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("HPOUT2R", WM5100_OUT2RMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("HPOUT3L", WM5100_OUT3LMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("HPOUT3R", WM5100_OUT3RMIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("SPKOUTL", WM5100_OUT4LMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("SPKOUTR", WM5100_OUT4RMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("SPKDAT1L", WM5100_OUT5LMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("SPKDAT1R", WM5100_OUT5RMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("SPKDAT2L", WM5100_OUT6LMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("SPKDAT2R", WM5100_OUT6RMIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("PWM1", WM5100_PWM1MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("PWM2", WM5100_PWM2MIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("AIF1TX1", WM5100_AIF1TX1MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF1TX2", WM5100_AIF1TX2MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF1TX3", WM5100_AIF1TX3MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF1TX4", WM5100_AIF1TX4MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF1TX5", WM5100_AIF1TX5MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF1TX6", WM5100_AIF1TX6MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF1TX7", WM5100_AIF1TX7MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF1TX8", WM5100_AIF1TX8MIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("AIF2TX1", WM5100_AIF2TX1MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF2TX2", WM5100_AIF2TX2MIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("AIF3TX1", WM5100_AIF3TX1MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("AIF3TX2", WM5100_AIF3TX2MIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("EQ1", WM5100_EQ1MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("EQ2", WM5100_EQ2MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("EQ3", WM5100_EQ3MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("EQ4", WM5100_EQ4MIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("DRC1L", WM5100_DRC1LMIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("DRC1R", WM5100_DRC1RMIX_INPUT_1_SOURCE),
+
+WM5100_MIXER_CONTROLS("LHPF1", WM5100_HPLP1MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("LHPF2", WM5100_HPLP2MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("LHPF3", WM5100_HPLP3MIX_INPUT_1_SOURCE),
+WM5100_MIXER_CONTROLS("LHPF4", WM5100_HPLP4MIX_INPUT_1_SOURCE),
+};
+
+static void wm5100_seq_notifier(struct snd_soc_dapm_context *dapm,
+ enum snd_soc_dapm_type event, int subseq)
+{
+ struct snd_soc_codec *codec = container_of(dapm,
+ struct snd_soc_codec, dapm);
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ u16 val, expect, i;
+
+ /* Wait for the outputs to flag themselves as enabled */
+ if (wm5100->out_ena[0]) {
+ expect = snd_soc_read(codec, WM5100_CHANNEL_ENABLES_1);
+ for (i = 0; i < 200; i++) {
+ val = snd_soc_read(codec, WM5100_OUTPUT_STATUS_1);
+ if (val == expect) {
+ wm5100->out_ena[0] = false;
+ break;
+ }
+ }
+ if (i == 200) {
+ dev_err(codec->dev, "Timeout waiting for OUTPUT1 %x\n",
+ expect);
+ }
+ }
+
+ if (wm5100->out_ena[1]) {
+ expect = snd_soc_read(codec, WM5100_OUTPUT_ENABLES_2);
+ for (i = 0; i < 200; i++) {
+ val = snd_soc_read(codec, WM5100_OUTPUT_STATUS_2);
+ if (val == expect) {
+ wm5100->out_ena[1] = false;
+ break;
+ }
+ }
+ if (i == 200) {
+ dev_err(codec->dev, "Timeout waiting for OUTPUT2 %x\n",
+ expect);
+ }
+ }
+}
+
+static int wm5100_out_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(w->codec);
+
+ switch (w->reg) {
+ case WM5100_CHANNEL_ENABLES_1:
+ wm5100->out_ena[0] = true;
+ break;
+ case WM5100_OUTPUT_ENABLES_2:
+ wm5100->out_ena[0] = true;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int wm5100_cp_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ ret = regulator_enable(wm5100->cpvdd);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable CPVDD: %d\n",
+ ret);
+ return ret;
+ }
+ return ret;
+
+ case SND_SOC_DAPM_POST_PMD:
+ ret = regulator_disable_deferred(wm5100->cpvdd, 20);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to disable CPVDD: %d\n",
+ ret);
+ return ret;
+ }
+ return ret;
+
+ default:
+ BUG();
+ return 0;
+ }
+}
+
+static int wm5100_dbvdd_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ struct regulator *regulator;
+ int ret;
+
+ switch (w->shift) {
+ case 2:
+ regulator = wm5100->dbvdd2;
+ break;
+ case 3:
+ regulator = wm5100->dbvdd3;
+ break;
+ default:
+ BUG();
+ return 0;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ ret = regulator_enable(regulator);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable DBVDD%d: %d\n",
+ w->shift, ret);
+ return ret;
+ }
+ return ret;
+
+ case SND_SOC_DAPM_POST_PMD:
+ ret = regulator_disable(regulator);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable DBVDD%d: %d\n",
+ w->shift, ret);
+ return ret;
+ }
+ return ret;
+
+ default:
+ BUG();
+ return 0;
+ }
+}
+
+static void wm5100_log_status3(struct snd_soc_codec *codec, int val)
+{
+ if (val & WM5100_SPK_SHUTDOWN_WARN_EINT)
+ dev_crit(codec->dev, "Speaker shutdown warning\n");
+ if (val & WM5100_SPK_SHUTDOWN_EINT)
+ dev_crit(codec->dev, "Speaker shutdown\n");
+ if (val & WM5100_CLKGEN_ERR_EINT)
+ dev_crit(codec->dev, "SYSCLK underclocked\n");
+ if (val & WM5100_CLKGEN_ERR_ASYNC_EINT)
+ dev_crit(codec->dev, "ASYNCCLK underclocked\n");
+}
+
+static void wm5100_log_status4(struct snd_soc_codec *codec, int val)
+{
+ if (val & WM5100_AIF3_ERR_EINT)
+ dev_err(codec->dev, "AIF3 configuration error\n");
+ if (val & WM5100_AIF2_ERR_EINT)
+ dev_err(codec->dev, "AIF2 configuration error\n");
+ if (val & WM5100_AIF1_ERR_EINT)
+ dev_err(codec->dev, "AIF1 configuration error\n");
+ if (val & WM5100_CTRLIF_ERR_EINT)
+ dev_err(codec->dev, "Control interface error\n");
+ if (val & WM5100_ISRC2_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "ISRC2 underclocked\n");
+ if (val & WM5100_ISRC1_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "ISRC1 underclocked\n");
+ if (val & WM5100_FX_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "FX underclocked\n");
+ if (val & WM5100_AIF3_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "AIF3 underclocked\n");
+ if (val & WM5100_AIF2_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "AIF2 underclocked\n");
+ if (val & WM5100_AIF1_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "AIF1 underclocked\n");
+ if (val & WM5100_ASRC_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "ASRC underclocked\n");
+ if (val & WM5100_DAC_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "DAC underclocked\n");
+ if (val & WM5100_ADC_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "ADC underclocked\n");
+ if (val & WM5100_MIXER_UNDERCLOCKED_EINT)
+ dev_err(codec->dev, "Mixer underclocked\n");
+}
+
+static int wm5100_post_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ int ret;
+
+ ret = snd_soc_read(codec, WM5100_INTERRUPT_RAW_STATUS_3);
+ ret &= WM5100_SPK_SHUTDOWN_WARN_STS |
+ WM5100_SPK_SHUTDOWN_STS | WM5100_CLKGEN_ERR_STS |
+ WM5100_CLKGEN_ERR_ASYNC_STS;
+ wm5100_log_status3(codec, ret);
+
+ ret = snd_soc_read(codec, WM5100_INTERRUPT_RAW_STATUS_4);
+ wm5100_log_status4(codec, ret);
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget wm5100_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("SYSCLK", WM5100_CLOCKING_3, WM5100_SYSCLK_ENA_SHIFT, 0,
+ NULL, 0),
+SND_SOC_DAPM_SUPPLY("ASYNCCLK", WM5100_CLOCKING_6, WM5100_ASYNC_CLK_ENA_SHIFT,
+ 0, NULL, 0),
+
+SND_SOC_DAPM_SUPPLY("CP1", WM5100_HP_CHARGE_PUMP_1, WM5100_CP1_ENA_SHIFT, 0,
+ wm5100_cp_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("CP2", WM5100_MIC_CHARGE_PUMP_1, WM5100_CP2_ENA_SHIFT, 0,
+ NULL, 0),
+SND_SOC_DAPM_SUPPLY("CP2 Active", WM5100_MIC_CHARGE_PUMP_1,
+ WM5100_CP2_BYPASS_SHIFT, 1, wm5100_cp_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("DBVDD2", SND_SOC_NOPM, 2, 0, wm5100_dbvdd_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("DBVDD3", SND_SOC_NOPM, 3, 0, wm5100_dbvdd_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_SUPPLY("MICBIAS1", WM5100_MIC_BIAS_CTRL_1, WM5100_MICB1_ENA_SHIFT,
+ 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("MICBIAS2", WM5100_MIC_BIAS_CTRL_2, WM5100_MICB2_ENA_SHIFT,
+ 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("MICBIAS3", WM5100_MIC_BIAS_CTRL_3, WM5100_MICB3_ENA_SHIFT,
+ 0, NULL, 0),
+
+SND_SOC_DAPM_INPUT("IN1L"),
+SND_SOC_DAPM_INPUT("IN1R"),
+SND_SOC_DAPM_INPUT("IN2L"),
+SND_SOC_DAPM_INPUT("IN2R"),
+SND_SOC_DAPM_INPUT("IN3L"),
+SND_SOC_DAPM_INPUT("IN3R"),
+SND_SOC_DAPM_INPUT("IN4L"),
+SND_SOC_DAPM_INPUT("IN4R"),
+SND_SOC_DAPM_INPUT("TONE"),
+
+SND_SOC_DAPM_PGA_E("IN1L PGA", WM5100_INPUT_ENABLES, WM5100_IN1L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("IN1R PGA", WM5100_INPUT_ENABLES, WM5100_IN1R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("IN2L PGA", WM5100_INPUT_ENABLES, WM5100_IN2L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("IN2R PGA", WM5100_INPUT_ENABLES, WM5100_IN2R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("IN3L PGA", WM5100_INPUT_ENABLES, WM5100_IN3L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("IN3R PGA", WM5100_INPUT_ENABLES, WM5100_IN3R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("IN4L PGA", WM5100_INPUT_ENABLES, WM5100_IN4L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("IN4R PGA", WM5100_INPUT_ENABLES, WM5100_IN4R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+
+SND_SOC_DAPM_PGA("Tone Generator 1", WM5100_TONE_GENERATOR_1,
+ WM5100_TONE1_ENA_SHIFT, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Tone Generator 2", WM5100_TONE_GENERATOR_1,
+ WM5100_TONE2_ENA_SHIFT, 0, NULL, 0),
+
+SND_SOC_DAPM_AIF_IN("AIF1RX1", "AIF1 Playback", 0,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX1_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF1RX2", "AIF1 Playback", 1,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX2_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF1RX3", "AIF1 Playback", 2,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX3_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF1RX4", "AIF1 Playback", 3,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX4_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF1RX5", "AIF1 Playback", 4,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX5_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF1RX6", "AIF1 Playback", 5,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX6_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF1RX7", "AIF1 Playback", 6,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX7_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF1RX8", "AIF1 Playback", 7,
+ WM5100_AUDIO_IF_1_27, WM5100_AIF1RX8_ENA_SHIFT, 0),
+
+SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 0,
+ WM5100_AUDIO_IF_2_27, WM5100_AIF2RX1_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF2RX2", "AIF2 Playback", 1,
+ WM5100_AUDIO_IF_2_27, WM5100_AIF2RX2_ENA_SHIFT, 0),
+
+SND_SOC_DAPM_AIF_IN("AIF3RX1", "AIF3 Playback", 0,
+ WM5100_AUDIO_IF_3_27, WM5100_AIF3RX1_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_IN("AIF3RX2", "AIF3 Playback", 1,
+ WM5100_AUDIO_IF_3_27, WM5100_AIF3RX2_ENA_SHIFT, 0),
+
+SND_SOC_DAPM_AIF_OUT("AIF1TX1", "AIF1 Capture", 0,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX1_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1TX2", "AIF1 Capture", 1,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX2_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1TX3", "AIF1 Capture", 2,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX3_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1TX4", "AIF1 Capture", 3,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX4_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1TX5", "AIF1 Capture", 4,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX5_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1TX6", "AIF1 Capture", 5,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX6_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1TX7", "AIF1 Capture", 6,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX7_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1TX8", "AIF1 Capture", 7,
+ WM5100_AUDIO_IF_1_26, WM5100_AIF1TX8_ENA_SHIFT, 0),
+
+SND_SOC_DAPM_AIF_OUT("AIF2TX1", "AIF2 Capture", 0,
+ WM5100_AUDIO_IF_2_26, WM5100_AIF2TX1_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF2TX2", "AIF2 Capture", 1,
+ WM5100_AUDIO_IF_2_26, WM5100_AIF2TX2_ENA_SHIFT, 0),
+
+SND_SOC_DAPM_AIF_OUT("AIF3TX1", "AIF3 Capture", 0,
+ WM5100_AUDIO_IF_3_26, WM5100_AIF3TX1_ENA_SHIFT, 0),
+SND_SOC_DAPM_AIF_OUT("AIF3TX2", "AIF3 Capture", 1,
+ WM5100_AUDIO_IF_3_26, WM5100_AIF3TX2_ENA_SHIFT, 0),
+
+SND_SOC_DAPM_PGA_E("OUT6L", WM5100_OUTPUT_ENABLES_2, WM5100_OUT6L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT6R", WM5100_OUTPUT_ENABLES_2, WM5100_OUT6R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT5L", WM5100_OUTPUT_ENABLES_2, WM5100_OUT5L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT5R", WM5100_OUTPUT_ENABLES_2, WM5100_OUT5R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT4L", WM5100_OUTPUT_ENABLES_2, WM5100_OUT4L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT4R", WM5100_OUTPUT_ENABLES_2, WM5100_OUT4R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT3L", WM5100_CHANNEL_ENABLES_1, WM5100_HP3L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT3R", WM5100_CHANNEL_ENABLES_1, WM5100_HP3R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT2L", WM5100_CHANNEL_ENABLES_1, WM5100_HP2L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT2R", WM5100_CHANNEL_ENABLES_1, WM5100_HP2R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT1L", WM5100_CHANNEL_ENABLES_1, WM5100_HP1L_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("OUT1R", WM5100_CHANNEL_ENABLES_1, WM5100_HP1R_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("PWM1 Driver", WM5100_PWM_DRIVE_1, WM5100_PWM1_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+SND_SOC_DAPM_PGA_E("PWM2 Driver", WM5100_PWM_DRIVE_1, WM5100_PWM2_ENA_SHIFT, 0,
+ NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU),
+
+SND_SOC_DAPM_PGA("EQ1", WM5100_EQ1_1, WM5100_EQ1_ENA_SHIFT, 0, NULL, 0),
+SND_SOC_DAPM_PGA("EQ2", WM5100_EQ2_1, WM5100_EQ2_ENA_SHIFT, 0, NULL, 0),
+SND_SOC_DAPM_PGA("EQ3", WM5100_EQ3_1, WM5100_EQ3_ENA_SHIFT, 0, NULL, 0),
+SND_SOC_DAPM_PGA("EQ4", WM5100_EQ4_1, WM5100_EQ4_ENA_SHIFT, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("DRC1L", WM5100_DRC1_CTRL1, WM5100_DRCL_ENA_SHIFT, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("DRC1R", WM5100_DRC1_CTRL1, WM5100_DRCR_ENA_SHIFT, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_PGA("LHPF1", WM5100_HPLPF1_1, WM5100_LHPF1_ENA_SHIFT, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LHPF2", WM5100_HPLPF2_1, WM5100_LHPF2_ENA_SHIFT, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LHPF3", WM5100_HPLPF3_1, WM5100_LHPF3_ENA_SHIFT, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LHPF4", WM5100_HPLPF4_1, WM5100_LHPF4_ENA_SHIFT, 0,
+ NULL, 0),
+
+WM5100_MIXER_WIDGETS(EQ1, "EQ1"),
+WM5100_MIXER_WIDGETS(EQ2, "EQ2"),
+WM5100_MIXER_WIDGETS(EQ3, "EQ3"),
+WM5100_MIXER_WIDGETS(EQ4, "EQ4"),
+
+WM5100_MIXER_WIDGETS(DRC1L, "DRC1L"),
+WM5100_MIXER_WIDGETS(DRC1R, "DRC1R"),
+
+WM5100_MIXER_WIDGETS(LHPF1, "LHPF1"),
+WM5100_MIXER_WIDGETS(LHPF2, "LHPF2"),
+WM5100_MIXER_WIDGETS(LHPF3, "LHPF3"),
+WM5100_MIXER_WIDGETS(LHPF4, "LHPF4"),
+
+WM5100_MIXER_WIDGETS(AIF1TX1, "AIF1TX1"),
+WM5100_MIXER_WIDGETS(AIF1TX2, "AIF1TX2"),
+WM5100_MIXER_WIDGETS(AIF1TX3, "AIF1TX3"),
+WM5100_MIXER_WIDGETS(AIF1TX4, "AIF1TX4"),
+WM5100_MIXER_WIDGETS(AIF1TX5, "AIF1TX5"),
+WM5100_MIXER_WIDGETS(AIF1TX6, "AIF1TX6"),
+WM5100_MIXER_WIDGETS(AIF1TX7, "AIF1TX7"),
+WM5100_MIXER_WIDGETS(AIF1TX8, "AIF1TX8"),
+
+WM5100_MIXER_WIDGETS(AIF2TX1, "AIF2TX1"),
+WM5100_MIXER_WIDGETS(AIF2TX2, "AIF2TX2"),
+
+WM5100_MIXER_WIDGETS(AIF3TX1, "AIF3TX1"),
+WM5100_MIXER_WIDGETS(AIF3TX2, "AIF3TX2"),
+
+WM5100_MIXER_WIDGETS(HPOUT1L, "HPOUT1L"),
+WM5100_MIXER_WIDGETS(HPOUT1R, "HPOUT1R"),
+WM5100_MIXER_WIDGETS(HPOUT2L, "HPOUT2L"),
+WM5100_MIXER_WIDGETS(HPOUT2R, "HPOUT2R"),
+WM5100_MIXER_WIDGETS(HPOUT3L, "HPOUT3L"),
+WM5100_MIXER_WIDGETS(HPOUT3R, "HPOUT3R"),
+
+WM5100_MIXER_WIDGETS(SPKOUTL, "SPKOUTL"),
+WM5100_MIXER_WIDGETS(SPKOUTR, "SPKOUTR"),
+WM5100_MIXER_WIDGETS(SPKDAT1L, "SPKDAT1L"),
+WM5100_MIXER_WIDGETS(SPKDAT1R, "SPKDAT1R"),
+WM5100_MIXER_WIDGETS(SPKDAT2L, "SPKDAT2L"),
+WM5100_MIXER_WIDGETS(SPKDAT2R, "SPKDAT2R"),
+
+WM5100_MIXER_WIDGETS(PWM1, "PWM1"),
+WM5100_MIXER_WIDGETS(PWM2, "PWM2"),
+
+SND_SOC_DAPM_OUTPUT("HPOUT1L"),
+SND_SOC_DAPM_OUTPUT("HPOUT1R"),
+SND_SOC_DAPM_OUTPUT("HPOUT2L"),
+SND_SOC_DAPM_OUTPUT("HPOUT2R"),
+SND_SOC_DAPM_OUTPUT("HPOUT3L"),
+SND_SOC_DAPM_OUTPUT("HPOUT3R"),
+SND_SOC_DAPM_OUTPUT("SPKOUTL"),
+SND_SOC_DAPM_OUTPUT("SPKOUTR"),
+SND_SOC_DAPM_OUTPUT("SPKDAT1"),
+SND_SOC_DAPM_OUTPUT("SPKDAT2"),
+SND_SOC_DAPM_OUTPUT("PWM1"),
+SND_SOC_DAPM_OUTPUT("PWM2"),
+};
+
+/* We register a _POST event if we don't have IRQ support so we can
+ * look at the error status from the CODEC - if we've got the IRQ
+ * hooked up then we will get prompted to look by an interrupt.
+ */
+static const struct snd_soc_dapm_widget wm5100_dapm_widgets_noirq[] = {
+SND_SOC_DAPM_POST("Post", wm5100_post_ev),
+};
+
+static const struct snd_soc_dapm_route wm5100_dapm_routes[] = {
+ { "IN1L", NULL, "SYSCLK" },
+ { "IN1R", NULL, "SYSCLK" },
+ { "IN2L", NULL, "SYSCLK" },
+ { "IN2R", NULL, "SYSCLK" },
+ { "IN3L", NULL, "SYSCLK" },
+ { "IN3R", NULL, "SYSCLK" },
+ { "IN4L", NULL, "SYSCLK" },
+ { "IN4R", NULL, "SYSCLK" },
+
+ { "OUT1L", NULL, "SYSCLK" },
+ { "OUT1R", NULL, "SYSCLK" },
+ { "OUT2L", NULL, "SYSCLK" },
+ { "OUT2R", NULL, "SYSCLK" },
+ { "OUT3L", NULL, "SYSCLK" },
+ { "OUT3R", NULL, "SYSCLK" },
+ { "OUT4L", NULL, "SYSCLK" },
+ { "OUT4R", NULL, "SYSCLK" },
+ { "OUT5L", NULL, "SYSCLK" },
+ { "OUT5R", NULL, "SYSCLK" },
+ { "OUT6L", NULL, "SYSCLK" },
+ { "OUT6R", NULL, "SYSCLK" },
+
+ { "AIF1RX1", NULL, "SYSCLK" },
+ { "AIF1RX2", NULL, "SYSCLK" },
+ { "AIF1RX3", NULL, "SYSCLK" },
+ { "AIF1RX4", NULL, "SYSCLK" },
+ { "AIF1RX5", NULL, "SYSCLK" },
+ { "AIF1RX6", NULL, "SYSCLK" },
+ { "AIF1RX7", NULL, "SYSCLK" },
+ { "AIF1RX8", NULL, "SYSCLK" },
+
+ { "AIF2RX1", NULL, "SYSCLK" },
+ { "AIF2RX1", NULL, "DBVDD2" },
+ { "AIF2RX2", NULL, "SYSCLK" },
+ { "AIF2RX2", NULL, "DBVDD2" },
+
+ { "AIF3RX1", NULL, "SYSCLK" },
+ { "AIF3RX1", NULL, "DBVDD3" },
+ { "AIF3RX2", NULL, "SYSCLK" },
+ { "AIF3RX2", NULL, "DBVDD3" },
+
+ { "AIF1TX1", NULL, "SYSCLK" },
+ { "AIF1TX2", NULL, "SYSCLK" },
+ { "AIF1TX3", NULL, "SYSCLK" },
+ { "AIF1TX4", NULL, "SYSCLK" },
+ { "AIF1TX5", NULL, "SYSCLK" },
+ { "AIF1TX6", NULL, "SYSCLK" },
+ { "AIF1TX7", NULL, "SYSCLK" },
+ { "AIF1TX8", NULL, "SYSCLK" },
+
+ { "AIF2TX1", NULL, "SYSCLK" },
+ { "AIF2TX1", NULL, "DBVDD2" },
+ { "AIF2TX2", NULL, "SYSCLK" },
+ { "AIF2TX2", NULL, "DBVDD2" },
+
+ { "AIF3TX1", NULL, "SYSCLK" },
+ { "AIF3TX1", NULL, "DBVDD3" },
+ { "AIF3TX2", NULL, "SYSCLK" },
+ { "AIF3TX2", NULL, "DBVDD3" },
+
+ { "MICBIAS1", NULL, "CP2" },
+ { "MICBIAS2", NULL, "CP2" },
+ { "MICBIAS3", NULL, "CP2" },
+
+ { "IN1L PGA", NULL, "CP2" },
+ { "IN1R PGA", NULL, "CP2" },
+ { "IN2L PGA", NULL, "CP2" },
+ { "IN2R PGA", NULL, "CP2" },
+ { "IN3L PGA", NULL, "CP2" },
+ { "IN3R PGA", NULL, "CP2" },
+ { "IN4L PGA", NULL, "CP2" },
+ { "IN4R PGA", NULL, "CP2" },
+
+ { "IN1L PGA", NULL, "CP2 Active" },
+ { "IN1R PGA", NULL, "CP2 Active" },
+ { "IN2L PGA", NULL, "CP2 Active" },
+ { "IN2R PGA", NULL, "CP2 Active" },
+ { "IN3L PGA", NULL, "CP2 Active" },
+ { "IN3R PGA", NULL, "CP2 Active" },
+ { "IN4L PGA", NULL, "CP2 Active" },
+ { "IN4R PGA", NULL, "CP2 Active" },
+
+ { "OUT1L", NULL, "CP1" },
+ { "OUT1R", NULL, "CP1" },
+ { "OUT2L", NULL, "CP1" },
+ { "OUT2R", NULL, "CP1" },
+ { "OUT3L", NULL, "CP1" },
+ { "OUT3R", NULL, "CP1" },
+
+ { "Tone Generator 1", NULL, "TONE" },
+ { "Tone Generator 2", NULL, "TONE" },
+
+ { "IN1L PGA", NULL, "IN1L" },
+ { "IN1R PGA", NULL, "IN1R" },
+ { "IN2L PGA", NULL, "IN2L" },
+ { "IN2R PGA", NULL, "IN2R" },
+ { "IN3L PGA", NULL, "IN3L" },
+ { "IN3R PGA", NULL, "IN3R" },
+ { "IN4L PGA", NULL, "IN4L" },
+ { "IN4R PGA", NULL, "IN4R" },
+
+ WM5100_MIXER_ROUTES("OUT1L", "HPOUT1L"),
+ WM5100_MIXER_ROUTES("OUT1R", "HPOUT1R"),
+ WM5100_MIXER_ROUTES("OUT2L", "HPOUT2L"),
+ WM5100_MIXER_ROUTES("OUT2R", "HPOUT2R"),
+ WM5100_MIXER_ROUTES("OUT3L", "HPOUT3L"),
+ WM5100_MIXER_ROUTES("OUT3R", "HPOUT3R"),
+
+ WM5100_MIXER_ROUTES("OUT4L", "SPKOUTL"),
+ WM5100_MIXER_ROUTES("OUT4R", "SPKOUTR"),
+ WM5100_MIXER_ROUTES("OUT5L", "SPKDAT1L"),
+ WM5100_MIXER_ROUTES("OUT5R", "SPKDAT1R"),
+ WM5100_MIXER_ROUTES("OUT6L", "SPKDAT2L"),
+ WM5100_MIXER_ROUTES("OUT6R", "SPKDAT2R"),
+
+ WM5100_MIXER_ROUTES("PWM1 Driver", "PWM1"),
+ WM5100_MIXER_ROUTES("PWM2 Driver", "PWM2"),
+
+ WM5100_MIXER_ROUTES("AIF1TX1", "AIF1TX1"),
+ WM5100_MIXER_ROUTES("AIF1TX2", "AIF1TX2"),
+ WM5100_MIXER_ROUTES("AIF1TX3", "AIF1TX3"),
+ WM5100_MIXER_ROUTES("AIF1TX4", "AIF1TX4"),
+ WM5100_MIXER_ROUTES("AIF1TX5", "AIF1TX5"),
+ WM5100_MIXER_ROUTES("AIF1TX6", "AIF1TX6"),
+ WM5100_MIXER_ROUTES("AIF1TX7", "AIF1TX7"),
+ WM5100_MIXER_ROUTES("AIF1TX8", "AIF1TX8"),
+
+ WM5100_MIXER_ROUTES("AIF2TX1", "AIF2TX1"),
+ WM5100_MIXER_ROUTES("AIF2TX2", "AIF2TX2"),
+
+ WM5100_MIXER_ROUTES("AIF3TX1", "AIF3TX1"),
+ WM5100_MIXER_ROUTES("AIF3TX2", "AIF3TX2"),
+
+ WM5100_MIXER_ROUTES("EQ1", "EQ1"),
+ WM5100_MIXER_ROUTES("EQ2", "EQ2"),
+ WM5100_MIXER_ROUTES("EQ3", "EQ3"),
+ WM5100_MIXER_ROUTES("EQ4", "EQ4"),
+
+ WM5100_MIXER_ROUTES("DRC1L", "DRC1L"),
+ WM5100_MIXER_ROUTES("DRC1R", "DRC1R"),
+
+ WM5100_MIXER_ROUTES("LHPF1", "LHPF1"),
+ WM5100_MIXER_ROUTES("LHPF2", "LHPF2"),
+ WM5100_MIXER_ROUTES("LHPF3", "LHPF3"),
+ WM5100_MIXER_ROUTES("LHPF4", "LHPF4"),
+
+ { "HPOUT1L", NULL, "OUT1L" },
+ { "HPOUT1R", NULL, "OUT1R" },
+ { "HPOUT2L", NULL, "OUT2L" },
+ { "HPOUT2R", NULL, "OUT2R" },
+ { "HPOUT3L", NULL, "OUT3L" },
+ { "HPOUT3R", NULL, "OUT3R" },
+ { "SPKOUTL", NULL, "OUT4L" },
+ { "SPKOUTR", NULL, "OUT4R" },
+ { "SPKDAT1", NULL, "OUT5L" },
+ { "SPKDAT1", NULL, "OUT5R" },
+ { "SPKDAT2", NULL, "OUT6L" },
+ { "SPKDAT2", NULL, "OUT6R" },
+ { "PWM1", NULL, "PWM1 Driver" },
+ { "PWM2", NULL, "PWM2 Driver" },
+};
+
+static struct {
+ int reg;
+ int val;
+} wm5100_reva_patches[] = {
+ { WM5100_AUDIO_IF_1_10, 0 },
+ { WM5100_AUDIO_IF_1_11, 1 },
+ { WM5100_AUDIO_IF_1_12, 2 },
+ { WM5100_AUDIO_IF_1_13, 3 },
+ { WM5100_AUDIO_IF_1_14, 4 },
+ { WM5100_AUDIO_IF_1_15, 5 },
+ { WM5100_AUDIO_IF_1_16, 6 },
+ { WM5100_AUDIO_IF_1_17, 7 },
+
+ { WM5100_AUDIO_IF_1_18, 0 },
+ { WM5100_AUDIO_IF_1_19, 1 },
+ { WM5100_AUDIO_IF_1_20, 2 },
+ { WM5100_AUDIO_IF_1_21, 3 },
+ { WM5100_AUDIO_IF_1_22, 4 },
+ { WM5100_AUDIO_IF_1_23, 5 },
+ { WM5100_AUDIO_IF_1_24, 6 },
+ { WM5100_AUDIO_IF_1_25, 7 },
+
+ { WM5100_AUDIO_IF_2_10, 0 },
+ { WM5100_AUDIO_IF_2_11, 1 },
+
+ { WM5100_AUDIO_IF_2_18, 0 },
+ { WM5100_AUDIO_IF_2_19, 1 },
+
+ { WM5100_AUDIO_IF_3_10, 0 },
+ { WM5100_AUDIO_IF_3_11, 1 },
+
+ { WM5100_AUDIO_IF_3_18, 0 },
+ { WM5100_AUDIO_IF_3_19, 1 },
+};
+
+static int wm5100_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int ret, i;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to enable supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (wm5100->pdata.ldo_ena) {
+ gpio_set_value_cansleep(wm5100->pdata.ldo_ena,
+ 1);
+ msleep(2);
+ }
+
+ codec->cache_only = false;
+
+ switch (wm5100->rev) {
+ case 0:
+ snd_soc_write(codec, 0x11, 0x3);
+ snd_soc_write(codec, 0x203, 0xc);
+ snd_soc_write(codec, 0x206, 0);
+ snd_soc_write(codec, 0x207, 0xf0);
+ snd_soc_write(codec, 0x208, 0x3c);
+ snd_soc_write(codec, 0x209, 0);
+ snd_soc_write(codec, 0x211, 0x20d8);
+ snd_soc_write(codec, 0x11, 0);
+
+ for (i = 0;
+ i < ARRAY_SIZE(wm5100_reva_patches);
+ i++)
+ snd_soc_write(codec,
+ wm5100_reva_patches[i].reg,
+ wm5100_reva_patches[i].val);
+ break;
+ default:
+ break;
+ }
+
+ snd_soc_cache_sync(codec);
+ }
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ if (wm5100->pdata.ldo_ena)
+ gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0);
+ regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+ break;
+ }
+ codec->dapm.bias_level = level;
+
+ return 0;
+}
+
+static int wm5100_dai_to_base(struct snd_soc_dai *dai)
+{
+ switch (dai->id) {
+ case 0:
+ return WM5100_AUDIO_IF_1_1 - 1;
+ case 1:
+ return WM5100_AUDIO_IF_2_1 - 1;
+ case 2:
+ return WM5100_AUDIO_IF_3_1 - 1;
+ default:
+ BUG();
+ return -EINVAL;
+ }
+}
+
+static int wm5100_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int lrclk, bclk, mask, base;
+
+ base = wm5100_dai_to_base(dai);
+ if (base < 0)
+ return base;
+
+ lrclk = 0;
+ bclk = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ mask = 0;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ mask = 1;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ mask = 2;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ mask = 3;
+ break;
+ default:
+ dev_err(codec->dev, "Unsupported DAI format %d\n",
+ fmt & SND_SOC_DAIFMT_FORMAT_MASK);
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ lrclk |= WM5100_AIF1TX_LRCLK_MSTR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ bclk |= WM5100_AIF1_BCLK_MSTR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ lrclk |= WM5100_AIF1TX_LRCLK_MSTR;
+ bclk |= WM5100_AIF1_BCLK_MSTR;
+ break;
+ default:
+ dev_err(codec->dev, "Unsupported master mode %d\n",
+ fmt & SND_SOC_DAIFMT_MASTER_MASK);
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ bclk |= WM5100_AIF1_BCLK_INV;
+ lrclk |= WM5100_AIF1TX_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ bclk |= WM5100_AIF1_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ lrclk |= WM5100_AIF1TX_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, base + 1, WM5100_AIF1_BCLK_MSTR |
+ WM5100_AIF1_BCLK_INV, bclk);
+ snd_soc_update_bits(codec, base + 2, WM5100_AIF1TX_LRCLK_MSTR |
+ WM5100_AIF1TX_LRCLK_INV, lrclk);
+ snd_soc_update_bits(codec, base + 3, WM5100_AIF1TX_LRCLK_MSTR |
+ WM5100_AIF1TX_LRCLK_INV, lrclk);
+ snd_soc_update_bits(codec, base + 5, WM5100_AIF1_FMT_MASK, mask);
+
+ return 0;
+}
+
+#define WM5100_NUM_BCLK_RATES 19
+
+static int wm5100_bclk_rates_dat[WM5100_NUM_BCLK_RATES] = {
+ 32000,
+ 48000,
+ 64000,
+ 96000,
+ 128000,
+ 192000,
+ 256000,
+ 384000,
+ 512000,
+ 768000,
+ 1024000,
+ 1536000,
+ 2048000,
+ 3072000,
+ 4096000,
+ 6144000,
+ 8192000,
+ 12288000,
+ 24576000,
+};
+
+static int wm5100_bclk_rates_cd[WM5100_NUM_BCLK_RATES] = {
+ 29400,
+ 44100,
+ 58800,
+ 88200,
+ 117600,
+ 176400,
+ 235200,
+ 352800,
+ 470400,
+ 705600,
+ 940800,
+ 1411200,
+ 1881600,
+ 2882400,
+ 3763200,
+ 5644800,
+ 7526400,
+ 11289600,
+ 22579600,
+};
+
+static int wm5100_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ bool async = wm5100->aif_async[dai->id];
+ int i, base, bclk, aif_rate, lrclk, wl, fl, sr;
+ int *bclk_rates;
+
+ base = wm5100_dai_to_base(dai);
+ if (base < 0)
+ return base;
+
+ /* Data sizes if not using TDM */
+ wl = snd_pcm_format_width(params_format(params));
+ if (wl < 0)
+ return wl;
+ fl = snd_soc_params_to_frame_size(params);
+ if (fl < 0)
+ return fl;
+
+ dev_dbg(codec->dev, "Word length %d bits, frame length %d bits\n",
+ wl, fl);
+
+ /* Target BCLK rate */
+ bclk = snd_soc_params_to_bclk(params);
+ if (bclk < 0)
+ return bclk;
+
+ /* Root for BCLK depends on SYS/ASYNCCLK */
+ if (!async) {
+ aif_rate = wm5100->sysclk;
+ sr = wm5100_alloc_sr(codec, params_rate(params));
+ if (sr < 0)
+ return sr;
+ } else {
+ /* If we're in ASYNCCLK set the ASYNC sample rate */
+ aif_rate = wm5100->asyncclk;
+ sr = 3;
+
+ for (i = 0; i < ARRAY_SIZE(wm5100_sr_code); i++)
+ if (params_rate(params) == wm5100_sr_code[i])
+ break;
+ if (i == ARRAY_SIZE(wm5100_sr_code)) {
+ dev_err(codec->dev, "Invalid rate %dHzn",
+ params_rate(params));
+ return -EINVAL;
+ }
+
+ /* TODO: We should really check for symmetry */
+ snd_soc_update_bits(codec, WM5100_CLOCKING_8,
+ WM5100_ASYNC_SAMPLE_RATE_MASK, i);
+ }
+
+ if (!aif_rate) {
+ dev_err(codec->dev, "%s has no rate set\n",
+ async ? "ASYNCCLK" : "SYSCLK");
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "Target BCLK is %dHz, using %dHz %s\n",
+ bclk, aif_rate, async ? "ASYNCCLK" : "SYSCLK");
+
+ if (aif_rate % 4000)
+ bclk_rates = wm5100_bclk_rates_cd;
+ else
+ bclk_rates = wm5100_bclk_rates_dat;
+
+ for (i = 0; i < WM5100_NUM_BCLK_RATES; i++)
+ if (bclk_rates[i] >= bclk && (bclk_rates[i] % bclk == 0))
+ break;
+ if (i == WM5100_NUM_BCLK_RATES) {
+ dev_err(codec->dev,
+ "No valid BCLK for %dHz found from %dHz %s\n",
+ bclk, aif_rate, async ? "ASYNCCLK" : "SYSCLK");
+ return -EINVAL;
+ }
+
+ bclk = i;
+ dev_dbg(codec->dev, "Setting %dHz BCLK\n", bclk_rates[bclk]);
+ snd_soc_update_bits(codec, base + 1, WM5100_AIF1_BCLK_FREQ_MASK, bclk);
+
+ lrclk = bclk_rates[bclk] / params_rate(params);
+ dev_dbg(codec->dev, "Setting %dHz LRCLK\n", bclk_rates[bclk] / lrclk);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
+ wm5100->aif_symmetric[dai->id])
+ snd_soc_update_bits(codec, base + 7,
+ WM5100_AIF1RX_BCPF_MASK, lrclk);
+ else
+ snd_soc_update_bits(codec, base + 6,
+ WM5100_AIF1TX_BCPF_MASK, lrclk);
+
+ i = (wl << WM5100_AIF1TX_WL_SHIFT) | fl;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ snd_soc_update_bits(codec, base + 9,
+ WM5100_AIF1RX_WL_MASK |
+ WM5100_AIF1RX_SLOT_LEN_MASK, i);
+ else
+ snd_soc_update_bits(codec, base + 8,
+ WM5100_AIF1TX_WL_MASK |
+ WM5100_AIF1TX_SLOT_LEN_MASK, i);
+
+ snd_soc_update_bits(codec, base + 4, WM5100_AIF1_RATE_MASK, sr);
+
+ return 0;
+}
+
+static struct snd_soc_dai_ops wm5100_dai_ops = {
+ .set_fmt = wm5100_set_fmt,
+ .hw_params = wm5100_hw_params,
+};
+
+static int wm5100_set_sysclk(struct snd_soc_codec *codec, int clk_id,
+ int source, unsigned int freq, int dir)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int *rate_store;
+ int fval, audio_rate, ret, reg;
+
+ switch (clk_id) {
+ case WM5100_CLK_SYSCLK:
+ reg = WM5100_CLOCKING_3;
+ rate_store = &wm5100->sysclk;
+ break;
+ case WM5100_CLK_ASYNCCLK:
+ reg = WM5100_CLOCKING_7;
+ rate_store = &wm5100->asyncclk;
+ break;
+ case WM5100_CLK_32KHZ:
+ /* The 32kHz clock is slightly different to the others */
+ switch (source) {
+ case WM5100_CLKSRC_MCLK1:
+ case WM5100_CLKSRC_MCLK2:
+ case WM5100_CLKSRC_SYSCLK:
+ snd_soc_update_bits(codec, WM5100_CLOCKING_1,
+ WM5100_CLK_32K_SRC_MASK,
+ source);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+
+ case WM5100_CLK_AIF1:
+ case WM5100_CLK_AIF2:
+ case WM5100_CLK_AIF3:
+ /* Not real clocks, record which clock domain they're in */
+ switch (source) {
+ case WM5100_CLKSRC_SYSCLK:
+ wm5100->aif_async[clk_id - 1] = false;
+ break;
+ case WM5100_CLKSRC_ASYNCCLK:
+ wm5100->aif_async[clk_id - 1] = true;
+ break;
+ default:
+ dev_err(codec->dev, "Invalid source %d\n", source);
+ return -EINVAL;
+ }
+ return 0;
+
+ case WM5100_CLK_OPCLK:
+ switch (freq) {
+ case 5644800:
+ case 6144000:
+ snd_soc_update_bits(codec, WM5100_MISC_GPIO_1,
+ WM5100_OPCLK_SEL_MASK, 0);
+ break;
+ case 11289600:
+ case 12288000:
+ snd_soc_update_bits(codec, WM5100_MISC_GPIO_1,
+ WM5100_OPCLK_SEL_MASK, 0);
+ break;
+ case 22579200:
+ case 24576000:
+ snd_soc_update_bits(codec, WM5100_MISC_GPIO_1,
+ WM5100_OPCLK_SEL_MASK, 0);
+ break;
+ default:
+ dev_err(codec->dev, "Unsupported OPCLK %dHz\n",
+ freq);
+ return -EINVAL;
+ }
+ return 0;
+
+ default:
+ dev_err(codec->dev, "Unknown clock %d\n", clk_id);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case WM5100_CLKSRC_SYSCLK:
+ case WM5100_CLKSRC_ASYNCCLK:
+ dev_err(codec->dev, "Invalid source %d\n", source);
+ return -EINVAL;
+ }
+
+ switch (freq) {
+ case 5644800:
+ case 6144000:
+ fval = 0;
+ break;
+ case 11289600:
+ case 12288000:
+ fval = 1;
+ break;
+ case 22579200:
+ case 24576000:
+ fval = 2;
+ break;
+ default:
+ dev_err(codec->dev, "Invalid clock rate: %d\n", freq);
+ return -EINVAL;
+ }
+
+ switch (freq) {
+ case 5644800:
+ case 11289600:
+ case 22579200:
+ audio_rate = 44100;
+ break;
+
+ case 6144000:
+ case 12288000:
+ case 24576000:
+ audio_rate = 48000;
+ break;
+
+ default:
+ BUG();
+ audio_rate = 0;
+ break;
+ }
+
+ /* TODO: Check if MCLKs are in use and enable/disable pulls to
+ * match.
+ */
+
+ snd_soc_update_bits(codec, reg, WM5100_SYSCLK_FREQ_MASK |
+ WM5100_SYSCLK_SRC_MASK,
+ fval << WM5100_SYSCLK_FREQ_SHIFT | source);
+
+ /* If this is SYSCLK then configure the clock rate for the
+ * internal audio functions to the natural sample rate for
+ * this clock rate.
+ */
+ if (clk_id == WM5100_CLK_SYSCLK) {
+ dev_dbg(codec->dev, "Setting primary audio rate to %dHz",
+ audio_rate);
+ if (0 && *rate_store)
+ wm5100_free_sr(codec, audio_rate);
+ ret = wm5100_alloc_sr(codec, audio_rate);
+ if (ret != 0)
+ dev_warn(codec->dev, "Primary audio slot is %d\n",
+ ret);
+ }
+
+ *rate_store = freq;
+
+ return 0;
+}
+
+struct _fll_div {
+ u16 fll_fratio;
+ u16 fll_outdiv;
+ u16 fll_refclk_div;
+ u16 n;
+ u16 theta;
+ u16 lambda;
+};
+
+static struct {
+ unsigned int min;
+ unsigned int max;
+ u16 fll_fratio;
+ int ratio;
+} fll_fratios[] = {
+ { 0, 64000, 4, 16 },
+ { 64000, 128000, 3, 8 },
+ { 128000, 256000, 2, 4 },
+ { 256000, 1000000, 1, 2 },
+ { 1000000, 13500000, 0, 1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+ unsigned int Fout)
+{
+ unsigned int target;
+ unsigned int div;
+ unsigned int fratio, gcd_fll;
+ int i;
+
+ /* Fref must be <=13.5MHz */
+ div = 1;
+ fll_div->fll_refclk_div = 0;
+ while ((Fref / div) > 13500000) {
+ div *= 2;
+ fll_div->fll_refclk_div++;
+
+ if (div > 8) {
+ pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+ Fref);
+ return -EINVAL;
+ }
+ }
+
+ pr_debug("FLL Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* Apply the division for our remaining calculations */
+ Fref /= div;
+
+ /* Fvco should be 90-100MHz; don't check the upper bound */
+ div = 2;
+ while (Fout * div < 90000000) {
+ div++;
+ if (div > 64) {
+ pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+ Fout);
+ return -EINVAL;
+ }
+ }
+ target = Fout * div;
+ fll_div->fll_outdiv = div - 1;
+
+ pr_debug("FLL Fvco=%dHz\n", target);
+
+ /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+ if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+ fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+ fratio = fll_fratios[i].ratio;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fll_fratios)) {
+ pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+ return -EINVAL;
+ }
+
+ fll_div->n = target / (fratio * Fref);
+
+ if (target % Fref == 0) {
+ fll_div->theta = 0;
+ fll_div->lambda = 0;
+ } else {
+ gcd_fll = gcd(target, fratio * Fref);
+
+ fll_div->theta = (target - (fll_div->n * fratio * Fref))
+ / gcd_fll;
+ fll_div->lambda = (fratio * Fref) / gcd_fll;
+ }
+
+ pr_debug("FLL N=%x THETA=%x LAMBDA=%x\n",
+ fll_div->n, fll_div->theta, fll_div->lambda);
+ pr_debug("FLL_FRATIO=%x(%d) FLL_OUTDIV=%x FLL_REFCLK_DIV=%x\n",
+ fll_div->fll_fratio, fratio, fll_div->fll_outdiv,
+ fll_div->fll_refclk_div);
+
+ return 0;
+}
+
+static int wm5100_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
+ unsigned int Fref, unsigned int Fout)
+{
+ struct i2c_client *i2c = to_i2c_client(codec->dev);
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ struct _fll_div factors;
+ struct wm5100_fll *fll;
+ int ret, base, lock, i, timeout;
+
+ switch (fll_id) {
+ case WM5100_FLL1:
+ fll = &wm5100->fll[0];
+ base = WM5100_FLL1_CONTROL_1 - 1;
+ lock = WM5100_FLL1_LOCK_STS;
+ break;
+ case WM5100_FLL2:
+ fll = &wm5100->fll[1];
+ base = WM5100_FLL2_CONTROL_2 - 1;
+ lock = WM5100_FLL2_LOCK_STS;
+ break;
+ default:
+ dev_err(codec->dev, "Unknown FLL %d\n",fll_id);
+ return -EINVAL;
+ }
+
+ if (!Fout) {
+ dev_dbg(codec->dev, "FLL%d disabled", fll_id);
+ fll->fout = 0;
+ snd_soc_update_bits(codec, base + 1, WM5100_FLL1_ENA, 0);
+ return 0;
+ }
+
+ switch (source) {
+ case WM5100_FLL_SRC_MCLK1:
+ case WM5100_FLL_SRC_MCLK2:
+ case WM5100_FLL_SRC_FLL1:
+ case WM5100_FLL_SRC_FLL2:
+ case WM5100_FLL_SRC_AIF1BCLK:
+ case WM5100_FLL_SRC_AIF2BCLK:
+ case WM5100_FLL_SRC_AIF3BCLK:
+ break;
+ default:
+ dev_err(codec->dev, "Invalid FLL source %d\n", source);
+ return -EINVAL;
+ }
+
+ ret = fll_factors(&factors, Fref, Fout);
+ if (ret < 0)
+ return ret;
+
+ /* Disable the FLL while we reconfigure */
+ snd_soc_update_bits(codec, base + 1, WM5100_FLL1_ENA, 0);
+
+ snd_soc_update_bits(codec, base + 2,
+ WM5100_FLL1_OUTDIV_MASK | WM5100_FLL1_FRATIO_MASK,
+ (factors.fll_outdiv << WM5100_FLL1_OUTDIV_SHIFT) |
+ factors.fll_fratio);
+ snd_soc_update_bits(codec, base + 3, WM5100_FLL1_THETA_MASK,
+ factors.theta);
+ snd_soc_update_bits(codec, base + 5, WM5100_FLL1_N_MASK, factors.n);
+ snd_soc_update_bits(codec, base + 6,
+ WM5100_FLL1_REFCLK_DIV_MASK |
+ WM5100_FLL1_REFCLK_SRC_MASK,
+ (factors.fll_refclk_div
+ << WM5100_FLL1_REFCLK_DIV_SHIFT) | source);
+ snd_soc_update_bits(codec, base + 7, WM5100_FLL1_LAMBDA_MASK,
+ factors.lambda);
+
+ /* Clear any pending completions */
+ try_wait_for_completion(&fll->lock);
+
+ snd_soc_update_bits(codec, base + 1, WM5100_FLL1_ENA, WM5100_FLL1_ENA);
+
+ if (i2c->irq)
+ timeout = 2;
+ else
+ timeout = 50;
+
+ /* Poll for the lock; will use interrupt when we can test */
+ for (i = 0; i < timeout; i++) {
+ if (i2c->irq) {
+ ret = wait_for_completion_timeout(&fll->lock,
+ msecs_to_jiffies(25));
+ if (ret > 0)
+ break;
+ } else {
+ msleep(1);
+ }
+
+ ret = snd_soc_read(codec,
+ WM5100_INTERRUPT_RAW_STATUS_3);
+ if (ret < 0) {
+ dev_err(codec->dev,
+ "Failed to read FLL status: %d\n",
+ ret);
+ continue;
+ }
+ if (ret & lock)
+ break;
+ }
+ if (i == timeout) {
+ dev_err(codec->dev, "FLL%d lock timed out\n", fll_id);
+ return -ETIMEDOUT;
+ }
+
+ fll->src = source;
+ fll->fref = Fref;
+ fll->fout = Fout;
+
+ dev_dbg(codec->dev, "FLL%d running %dHz->%dHz\n", fll_id,
+ Fref, Fout);
+
+ return 0;
+}
+
+/* Actually go much higher */
+#define WM5100_RATES SNDRV_PCM_RATE_8000_192000
+
+#define WM5100_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver wm5100_dai[] = {
+ {
+ .name = "wm5100-aif1",
+ .playback = {
+ .stream_name = "AIF1 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM5100_RATES,
+ .formats = WM5100_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF1 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM5100_RATES,
+ .formats = WM5100_FORMATS,
+ },
+ .ops = &wm5100_dai_ops,
+ },
+ {
+ .name = "wm5100-aif2",
+ .id = 1,
+ .playback = {
+ .stream_name = "AIF2 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM5100_RATES,
+ .formats = WM5100_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF2 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM5100_RATES,
+ .formats = WM5100_FORMATS,
+ },
+ .ops = &wm5100_dai_ops,
+ },
+ {
+ .name = "wm5100-aif3",
+ .id = 2,
+ .playback = {
+ .stream_name = "AIF3 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM5100_RATES,
+ .formats = WM5100_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF3 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM5100_RATES,
+ .formats = WM5100_FORMATS,
+ },
+ .ops = &wm5100_dai_ops,
+ },
+};
+
+static int wm5100_dig_vu[] = {
+ WM5100_ADC_DIGITAL_VOLUME_1L,
+ WM5100_ADC_DIGITAL_VOLUME_1R,
+ WM5100_ADC_DIGITAL_VOLUME_2L,
+ WM5100_ADC_DIGITAL_VOLUME_2R,
+ WM5100_ADC_DIGITAL_VOLUME_3L,
+ WM5100_ADC_DIGITAL_VOLUME_3R,
+ WM5100_ADC_DIGITAL_VOLUME_4L,
+ WM5100_ADC_DIGITAL_VOLUME_4R,
+
+ WM5100_DAC_DIGITAL_VOLUME_1L,
+ WM5100_DAC_DIGITAL_VOLUME_1R,
+ WM5100_DAC_DIGITAL_VOLUME_2L,
+ WM5100_DAC_DIGITAL_VOLUME_2R,
+ WM5100_DAC_DIGITAL_VOLUME_3L,
+ WM5100_DAC_DIGITAL_VOLUME_3R,
+ WM5100_DAC_DIGITAL_VOLUME_4L,
+ WM5100_DAC_DIGITAL_VOLUME_4R,
+ WM5100_DAC_DIGITAL_VOLUME_5L,
+ WM5100_DAC_DIGITAL_VOLUME_5R,
+ WM5100_DAC_DIGITAL_VOLUME_6L,
+ WM5100_DAC_DIGITAL_VOLUME_6R,
+};
+
+static void wm5100_set_detect_mode(struct snd_soc_codec *codec, int the_mode)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ struct wm5100_jack_mode *mode = &wm5100->pdata.jack_modes[the_mode];
+
+ BUG_ON(the_mode >= ARRAY_SIZE(wm5100->pdata.jack_modes));
+
+ gpio_set_value_cansleep(wm5100->pdata.hp_pol, mode->hp_pol);
+ snd_soc_update_bits(codec, WM5100_ACCESSORY_DETECT_MODE_1,
+ WM5100_ACCDET_BIAS_SRC_MASK |
+ WM5100_ACCDET_SRC,
+ (mode->bias << WM5100_ACCDET_BIAS_SRC_SHIFT) |
+ mode->micd_src << WM5100_ACCDET_SRC_SHIFT);
+ snd_soc_update_bits(codec, WM5100_MISC_CONTROL,
+ WM5100_HPCOM_SRC,
+ mode->micd_src << WM5100_HPCOM_SRC_SHIFT);
+
+ wm5100->jack_mode = the_mode;
+
+ dev_dbg(codec->dev, "Set microphone polarity to %d\n",
+ wm5100->jack_mode);
+}
+
+static void wm5100_micd_irq(struct snd_soc_codec *codec)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int val;
+
+ val = snd_soc_read(codec, WM5100_MIC_DETECT_3);
+
+ dev_dbg(codec->dev, "Microphone event: %x\n", val);
+
+ if (!(val & WM5100_ACCDET_VALID)) {
+ dev_warn(codec->dev, "Microphone detection state invalid\n");
+ return;
+ }
+
+ /* No accessory, reset everything and report removal */
+ if (!(val & WM5100_ACCDET_STS)) {
+ dev_dbg(codec->dev, "Jack removal detected\n");
+ wm5100->jack_mic = false;
+ wm5100->jack_detecting = true;
+ snd_soc_jack_report(wm5100->jack, 0,
+ SND_JACK_LINEOUT | SND_JACK_HEADSET |
+ SND_JACK_BTN_0);
+
+ snd_soc_update_bits(codec, WM5100_MIC_DETECT_1,
+ WM5100_ACCDET_RATE_MASK,
+ WM5100_ACCDET_RATE_MASK);
+ return;
+ }
+
+ /* If the measurement is very high we've got a microphone,
+ * either we just detected one or if we already reported then
+ * we've got a button release event.
+ */
+ if (val & 0x400) {
+ if (wm5100->jack_detecting) {
+ dev_dbg(codec->dev, "Microphone detected\n");
+ wm5100->jack_mic = true;
+ snd_soc_jack_report(wm5100->jack,
+ SND_JACK_HEADSET,
+ SND_JACK_HEADSET | SND_JACK_BTN_0);
+
+ /* Increase poll rate to give better responsiveness
+ * for buttons */
+ snd_soc_update_bits(codec, WM5100_MIC_DETECT_1,
+ WM5100_ACCDET_RATE_MASK,
+ 5 << WM5100_ACCDET_RATE_SHIFT);
+ } else {
+ dev_dbg(codec->dev, "Mic button up\n");
+ snd_soc_jack_report(wm5100->jack, 0, SND_JACK_BTN_0);
+ }
+
+ return;
+ }
+
+ /* If we detected a lower impedence during initial startup
+ * then we probably have the wrong polarity, flip it. Don't
+ * do this for the lowest impedences to speed up detection of
+ * plain headphones.
+ */
+ if (wm5100->jack_detecting && (val & 0x3f8)) {
+ wm5100_set_detect_mode(codec, !wm5100->jack_mode);
+
+ return;
+ }
+
+ /* Don't distinguish between buttons, just report any low
+ * impedence as BTN_0.
+ */
+ if (val & 0x3fc) {
+ if (wm5100->jack_mic) {
+ dev_dbg(codec->dev, "Mic button detected\n");
+ snd_soc_jack_report(wm5100->jack, SND_JACK_BTN_0,
+ SND_JACK_BTN_0);
+ } else if (wm5100->jack_detecting) {
+ dev_dbg(codec->dev, "Headphone detected\n");
+ snd_soc_jack_report(wm5100->jack, SND_JACK_HEADPHONE,
+ SND_JACK_HEADPHONE);
+
+ /* Increase the detection rate a bit for
+ * responsiveness.
+ */
+ snd_soc_update_bits(codec, WM5100_MIC_DETECT_1,
+ WM5100_ACCDET_RATE_MASK,
+ 7 << WM5100_ACCDET_RATE_SHIFT);
+ }
+ }
+}
+
+int wm5100_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+
+ if (jack) {
+ wm5100->jack = jack;
+ wm5100->jack_detecting = true;
+
+ wm5100_set_detect_mode(codec, 0);
+
+ /* Slowest detection rate, gives debounce for initial
+ * detection */
+ snd_soc_update_bits(codec, WM5100_MIC_DETECT_1,
+ WM5100_ACCDET_BIAS_STARTTIME_MASK |
+ WM5100_ACCDET_RATE_MASK,
+ (7 << WM5100_ACCDET_BIAS_STARTTIME_SHIFT) |
+ WM5100_ACCDET_RATE_MASK);
+
+ /* We need the charge pump to power MICBIAS */
+ snd_soc_dapm_force_enable_pin(&codec->dapm, "CP2");
+ snd_soc_dapm_force_enable_pin(&codec->dapm, "SYSCLK");
+ snd_soc_dapm_sync(&codec->dapm);
+
+ /* We start off just enabling microphone detection - even a
+ * plain headphone will trigger detection.
+ */
+ snd_soc_update_bits(codec, WM5100_MIC_DETECT_1,
+ WM5100_ACCDET_ENA, WM5100_ACCDET_ENA);
+
+ snd_soc_update_bits(codec, WM5100_INTERRUPT_STATUS_3_MASK,
+ WM5100_IM_ACCDET_EINT, 0);
+ } else {
+ snd_soc_update_bits(codec, WM5100_INTERRUPT_STATUS_3_MASK,
+ WM5100_IM_HPDET_EINT |
+ WM5100_IM_ACCDET_EINT,
+ WM5100_IM_HPDET_EINT |
+ WM5100_IM_ACCDET_EINT);
+ snd_soc_update_bits(codec, WM5100_MIC_DETECT_1,
+ WM5100_ACCDET_ENA, 0);
+ wm5100->jack = NULL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t wm5100_irq(int irq, void *data)
+{
+ struct snd_soc_codec *codec = data;
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ irqreturn_t status = IRQ_NONE;
+ int irq_val;
+
+ irq_val = snd_soc_read(codec, WM5100_INTERRUPT_STATUS_3);
+ if (irq_val < 0) {
+ dev_err(codec->dev, "Failed to read IRQ status 3: %d\n",
+ irq_val);
+ irq_val = 0;
+ }
+ irq_val &= ~snd_soc_read(codec, WM5100_INTERRUPT_STATUS_3_MASK);
+
+ snd_soc_write(codec, WM5100_INTERRUPT_STATUS_3, irq_val);
+
+ if (irq_val)
+ status = IRQ_HANDLED;
+
+ wm5100_log_status3(codec, irq_val);
+
+ if (irq_val & WM5100_FLL1_LOCK_EINT) {
+ dev_dbg(codec->dev, "FLL1 locked\n");
+ complete(&wm5100->fll[0].lock);
+ }
+ if (irq_val & WM5100_FLL2_LOCK_EINT) {
+ dev_dbg(codec->dev, "FLL2 locked\n");
+ complete(&wm5100->fll[1].lock);
+ }
+
+ if (irq_val & WM5100_ACCDET_EINT)
+ wm5100_micd_irq(codec);
+
+ irq_val = snd_soc_read(codec, WM5100_INTERRUPT_STATUS_4);
+ if (irq_val < 0) {
+ dev_err(codec->dev, "Failed to read IRQ status 4: %d\n",
+ irq_val);
+ irq_val = 0;
+ }
+ irq_val &= ~snd_soc_read(codec, WM5100_INTERRUPT_STATUS_4_MASK);
+
+ if (irq_val)
+ status = IRQ_HANDLED;
+
+ snd_soc_write(codec, WM5100_INTERRUPT_STATUS_4, irq_val);
+
+ wm5100_log_status4(codec, irq_val);
+
+ return status;
+}
+
+static irqreturn_t wm5100_edge_irq(int irq, void *data)
+{
+ irqreturn_t ret = IRQ_NONE;
+ irqreturn_t val;
+
+ do {
+ val = wm5100_irq(irq, data);
+ if (val != IRQ_NONE)
+ ret = val;
+ } while (val != IRQ_NONE);
+
+ return ret;
+}
+
+#ifdef CONFIG_GPIOLIB
+static inline struct wm5100_priv *gpio_to_wm5100(struct gpio_chip *chip)
+{
+ return container_of(chip, struct wm5100_priv, gpio_chip);
+}
+
+static void wm5100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
+ struct snd_soc_codec *codec = wm5100->codec;
+
+ snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
+ WM5100_GP1_LVL, !!value << WM5100_GP1_LVL_SHIFT);
+}
+
+static int wm5100_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
+ struct snd_soc_codec *codec = wm5100->codec;
+ int val;
+
+ val = (1 << WM5100_GP1_FN_SHIFT) | (!!value << WM5100_GP1_LVL_SHIFT);
+
+ return snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
+ WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
+ WM5100_GP1_LVL, val);
+}
+
+static int wm5100_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
+ struct snd_soc_codec *codec = wm5100->codec;
+ int ret;
+
+ ret = snd_soc_read(codec, WM5100_GPIO_CTRL_1 + offset);
+ if (ret < 0)
+ return ret;
+
+ return (ret & WM5100_GP1_LVL) != 0;
+}
+
+static int wm5100_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
+ struct snd_soc_codec *codec = wm5100->codec;
+
+ return snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
+ WM5100_GP1_FN_MASK | WM5100_GP1_DIR,
+ (1 << WM5100_GP1_FN_SHIFT) |
+ (1 << WM5100_GP1_DIR_SHIFT));
+}
+
+static struct gpio_chip wm5100_template_chip = {
+ .label = "wm5100",
+ .owner = THIS_MODULE,
+ .direction_output = wm5100_gpio_direction_out,
+ .set = wm5100_gpio_set,
+ .direction_input = wm5100_gpio_direction_in,
+ .get = wm5100_gpio_get,
+ .can_sleep = 1,
+};
+
+static void wm5100_init_gpio(struct snd_soc_codec *codec)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ wm5100->gpio_chip = wm5100_template_chip;
+ wm5100->gpio_chip.ngpio = 6;
+ wm5100->gpio_chip.dev = codec->dev;
+
+ if (wm5100->pdata.gpio_base)
+ wm5100->gpio_chip.base = wm5100->pdata.gpio_base;
+ else
+ wm5100->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&wm5100->gpio_chip);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret);
+}
+
+static void wm5100_free_gpio(struct snd_soc_codec *codec)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ ret = gpiochip_remove(&wm5100->gpio_chip);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret);
+}
+#else
+static void wm5100_init_gpio(struct snd_soc_codec *codec)
+{
+}
+
+static void wm5100_free_gpio(struct snd_soc_codec *codec)
+{
+}
+#endif
+
+static int wm5100_probe(struct snd_soc_codec *codec)
+{
+ struct i2c_client *i2c = to_i2c_client(codec->dev);
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ int ret, i, irq_flags;
+
+ wm5100->codec = codec;
+
+ ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm5100->core_supplies); i++)
+ wm5100->core_supplies[i].supply = wm5100_core_supply_names[i];
+
+ ret = regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request core supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ wm5100->cpvdd = regulator_get(&i2c->dev, "CPVDD");
+ if (IS_ERR(wm5100->cpvdd)) {
+ ret = PTR_ERR(wm5100->cpvdd);
+ dev_err(&i2c->dev, "Failed to get CPVDD: %d\n", ret);
+ goto err_core;
+ }
+
+ wm5100->dbvdd2 = regulator_get(&i2c->dev, "DBVDD2");
+ if (IS_ERR(wm5100->dbvdd2)) {
+ ret = PTR_ERR(wm5100->dbvdd2);
+ dev_err(&i2c->dev, "Failed to get DBVDD2: %d\n", ret);
+ goto err_cpvdd;
+ }
+
+ wm5100->dbvdd3 = regulator_get(&i2c->dev, "DBVDD3");
+ if (IS_ERR(wm5100->dbvdd3)) {
+ ret = PTR_ERR(wm5100->dbvdd3);
+ dev_err(&i2c->dev, "Failed to get DBVDD2: %d\n", ret);
+ goto err_dbvdd2;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable core supplies: %d\n",
+ ret);
+ goto err_dbvdd3;
+ }
+
+ if (wm5100->pdata.ldo_ena) {
+ ret = gpio_request_one(wm5100->pdata.ldo_ena,
+ GPIOF_OUT_INIT_HIGH, "WM5100 LDOENA");
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to request LDOENA %d: %d\n",
+ wm5100->pdata.ldo_ena, ret);
+ goto err_enable;
+ }
+ msleep(2);
+ }
+
+ if (wm5100->pdata.reset) {
+ ret = gpio_request_one(wm5100->pdata.reset,
+ GPIOF_OUT_INIT_HIGH, "WM5100 /RESET");
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to request /RESET %d: %d\n",
+ wm5100->pdata.reset, ret);
+ goto err_ldo;
+ }
+ }
+
+ ret = snd_soc_read(codec, WM5100_SOFTWARE_RESET);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read ID register\n");
+ goto err_reset;
+ }
+ switch (ret) {
+ case 0x8997:
+ case 0x5100:
+ break;
+
+ default:
+ dev_err(codec->dev, "Device is not a WM5100, ID is %x\n", ret);
+ ret = -EINVAL;
+ goto err_reset;
+ }
+
+ ret = snd_soc_read(codec, WM5100_DEVICE_REVISION);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read revision register\n");
+ goto err_reset;
+ }
+ wm5100->rev = ret & WM5100_DEVICE_REVISION_MASK;
+
+ dev_info(codec->dev, "revision %c\n", wm5100->rev + 'A');
+
+ ret = wm5100_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err_reset;
+ }
+
+ codec->cache_only = true;
+
+ wm5100_init_gpio(codec);
+
+ for (i = 0; i < ARRAY_SIZE(wm5100_dig_vu); i++)
+ snd_soc_update_bits(codec, wm5100_dig_vu[i], WM5100_OUT_VU,
+ WM5100_OUT_VU);
+
+ for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) {
+ snd_soc_update_bits(codec, WM5100_IN1L_CONTROL,
+ WM5100_IN1_MODE_MASK |
+ WM5100_IN1_DMIC_SUP_MASK,
+ (wm5100->pdata.in_mode[i] <<
+ WM5100_IN1_MODE_SHIFT) |
+ (wm5100->pdata.dmic_sup[i] <<
+ WM5100_IN1_DMIC_SUP_SHIFT));
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) {
+ if (!wm5100->pdata.gpio_defaults[i])
+ continue;
+
+ snd_soc_write(codec, WM5100_GPIO_CTRL_1 + i,
+ wm5100->pdata.gpio_defaults[i]);
+ }
+
+ /* Don't debounce interrupts to support use of SYSCLK only */
+ snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_1, 0);
+ snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_2, 0);
+
+ /* TODO: check if we're symmetric */
+
+ if (i2c->irq) {
+ if (wm5100->pdata.irq_flags)
+ irq_flags = wm5100->pdata.irq_flags;
+ else
+ irq_flags = IRQF_TRIGGER_LOW;
+
+ irq_flags |= IRQF_ONESHOT;
+
+ if (irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))
+ ret = request_threaded_irq(i2c->irq, NULL,
+ wm5100_edge_irq,
+ irq_flags, "wm5100", codec);
+ else
+ ret = request_threaded_irq(i2c->irq, NULL, wm5100_irq,
+ irq_flags, "wm5100", codec);
+
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request IRQ %d: %d\n",
+ i2c->irq, ret);
+ } else {
+ /* Enable default interrupts */
+ snd_soc_update_bits(codec,
+ WM5100_INTERRUPT_STATUS_3_MASK,
+ WM5100_IM_SPK_SHUTDOWN_WARN_EINT |
+ WM5100_IM_SPK_SHUTDOWN_EINT |
+ WM5100_IM_ASRC2_LOCK_EINT |
+ WM5100_IM_ASRC1_LOCK_EINT |
+ WM5100_IM_FLL2_LOCK_EINT |
+ WM5100_IM_FLL1_LOCK_EINT |
+ WM5100_CLKGEN_ERR_EINT |
+ WM5100_CLKGEN_ERR_ASYNC_EINT, 0);
+
+ snd_soc_update_bits(codec,
+ WM5100_INTERRUPT_STATUS_4_MASK,
+ WM5100_AIF3_ERR_EINT |
+ WM5100_AIF2_ERR_EINT |
+ WM5100_AIF1_ERR_EINT |
+ WM5100_CTRLIF_ERR_EINT |
+ WM5100_ISRC2_UNDERCLOCKED_EINT |
+ WM5100_ISRC1_UNDERCLOCKED_EINT |
+ WM5100_FX_UNDERCLOCKED_EINT |
+ WM5100_AIF3_UNDERCLOCKED_EINT |
+ WM5100_AIF2_UNDERCLOCKED_EINT |
+ WM5100_AIF1_UNDERCLOCKED_EINT |
+ WM5100_ASRC_UNDERCLOCKED_EINT |
+ WM5100_DAC_UNDERCLOCKED_EINT |
+ WM5100_ADC_UNDERCLOCKED_EINT |
+ WM5100_MIXER_UNDERCLOCKED_EINT, 0);
+ }
+ } else {
+ snd_soc_dapm_new_controls(&codec->dapm,
+ wm5100_dapm_widgets_noirq,
+ ARRAY_SIZE(wm5100_dapm_widgets_noirq));
+ }
+
+ if (wm5100->pdata.hp_pol) {
+ ret = gpio_request_one(wm5100->pdata.hp_pol,
+ GPIOF_OUT_INIT_HIGH, "WM5100 HP_POL");
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to request HP_POL %d: %d\n",
+ wm5100->pdata.hp_pol, ret);
+ goto err_gpio;
+ }
+ }
+
+ /* We'll get woken up again when the system has something useful
+ * for us to do.
+ */
+ if (wm5100->pdata.ldo_ena)
+ gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0);
+ regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+
+ return 0;
+
+err_gpio:
+ if (i2c->irq)
+ free_irq(i2c->irq, codec);
+ wm5100_free_gpio(codec);
+err_reset:
+ if (wm5100->pdata.reset) {
+ gpio_set_value_cansleep(wm5100->pdata.reset, 1);
+ gpio_free(wm5100->pdata.reset);
+ }
+err_ldo:
+ if (wm5100->pdata.ldo_ena) {
+ gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0);
+ gpio_free(wm5100->pdata.ldo_ena);
+ }
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+err_dbvdd3:
+ regulator_put(wm5100->dbvdd3);
+err_dbvdd2:
+ regulator_put(wm5100->dbvdd2);
+err_cpvdd:
+ regulator_put(wm5100->cpvdd);
+err_core:
+ regulator_bulk_free(ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+
+ return ret;
+}
+
+static int wm5100_remove(struct snd_soc_codec *codec)
+{
+ struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+ struct i2c_client *i2c = to_i2c_client(codec->dev);
+
+ wm5100_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ if (wm5100->pdata.hp_pol) {
+ gpio_free(wm5100->pdata.hp_pol);
+ }
+ if (i2c->irq)
+ free_irq(i2c->irq, codec);
+ wm5100_free_gpio(codec);
+ if (wm5100->pdata.reset) {
+ gpio_set_value_cansleep(wm5100->pdata.reset, 1);
+ gpio_free(wm5100->pdata.reset);
+ }
+ if (wm5100->pdata.ldo_ena) {
+ gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0);
+ gpio_free(wm5100->pdata.ldo_ena);
+ }
+ regulator_put(wm5100->dbvdd3);
+ regulator_put(wm5100->dbvdd2);
+ regulator_put(wm5100->cpvdd);
+ regulator_bulk_free(ARRAY_SIZE(wm5100->core_supplies),
+ wm5100->core_supplies);
+ return 0;
+}
+
+static struct snd_soc_codec_driver soc_codec_dev_wm5100 = {
+ .probe = wm5100_probe,
+ .remove = wm5100_remove,
+
+ .set_sysclk = wm5100_set_sysclk,
+ .set_pll = wm5100_set_fll,
+ .set_bias_level = wm5100_set_bias_level,
+ .idle_bias_off = 1,
+
+ .seq_notifier = wm5100_seq_notifier,
+ .controls = wm5100_snd_controls,
+ .num_controls = ARRAY_SIZE(wm5100_snd_controls),
+ .dapm_widgets = wm5100_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm5100_dapm_widgets),
+ .dapm_routes = wm5100_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(wm5100_dapm_routes),
+
+ .reg_cache_size = ARRAY_SIZE(wm5100_reg_defaults),
+ .reg_word_size = sizeof(u16),
+ .compress_type = SND_SOC_RBTREE_COMPRESSION,
+ .reg_cache_default = wm5100_reg_defaults,
+
+ .volatile_register = wm5100_volatile_register,
+ .readable_register = wm5100_readable_register,
+};
+
+static __devinit int wm5100_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm5100_pdata *pdata = dev_get_platdata(&i2c->dev);
+ struct wm5100_priv *wm5100;
+ int ret, i;
+
+ wm5100 = kzalloc(sizeof(struct wm5100_priv), GFP_KERNEL);
+ if (wm5100 == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(wm5100->fll); i++)
+ init_completion(&wm5100->fll[i].lock);
+
+ if (pdata)
+ wm5100->pdata = *pdata;
+
+ i2c_set_clientdata(i2c, wm5100);
+
+ ret = snd_soc_register_codec(&i2c->dev,
+ &soc_codec_dev_wm5100, wm5100_dai,
+ ARRAY_SIZE(wm5100_dai));
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to register WM5100: %d\n", ret);
+ kfree(wm5100);
+ }
+
+ return ret;
+}
+
+static __devexit int wm5100_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+static const struct i2c_device_id wm5100_i2c_id[] = {
+ { "wm5100", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm5100_i2c_id);
+
+static struct i2c_driver wm5100_i2c_driver = {
+ .driver = {
+ .name = "wm5100",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm5100_i2c_probe,
+ .remove = __devexit_p(wm5100_i2c_remove),
+ .id_table = wm5100_i2c_id,
+};
+
+static int __init wm5100_modinit(void)
+{
+ return i2c_add_driver(&wm5100_i2c_driver);
+}
+module_init(wm5100_modinit);
+
+static void __exit wm5100_exit(void)
+{
+ i2c_del_driver(&wm5100_i2c_driver);
+}
+module_exit(wm5100_exit);
+
+MODULE_DESCRIPTION("ASoC WM5100 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm5100.h b/sound/soc/codecs/wm5100.h
new file mode 100644
index 0000000..9707596
--- /dev/null
+++ b/sound/soc/codecs/wm5100.h
@@ -0,0 +1,5155 @@
+/*
+ * wm5100.h -- WM5100 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef WM5100_ASOC_H
+#define WM5100_ASOC_H
+
+#include <sound/soc.h>
+
+int wm5100_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack);
+
+#define WM5100_CLK_AIF1 1
+#define WM5100_CLK_AIF2 2
+#define WM5100_CLK_AIF3 3
+#define WM5100_CLK_SYSCLK 4
+#define WM5100_CLK_ASYNCCLK 5
+#define WM5100_CLK_32KHZ 6
+#define WM5100_CLK_OPCLK 7
+
+#define WM5100_CLKSRC_MCLK1 0
+#define WM5100_CLKSRC_MCLK2 1
+#define WM5100_CLKSRC_SYSCLK 2
+#define WM5100_CLKSRC_FLL1 4
+#define WM5100_CLKSRC_FLL2 5
+#define WM5100_CLKSRC_AIF1BCLK 8
+#define WM5100_CLKSRC_AIF2BCLK 9
+#define WM5100_CLKSRC_AIF3BCLK 10
+#define WM5100_CLKSRC_ASYNCCLK 0x100
+
+#define WM5100_FLL1 1
+#define WM5100_FLL2 2
+
+#define WM5100_FLL_SRC_MCLK1 0x0
+#define WM5100_FLL_SRC_MCLK2 0x1
+#define WM5100_FLL_SRC_FLL1 0x4
+#define WM5100_FLL_SRC_FLL2 0x5
+#define WM5100_FLL_SRC_AIF1BCLK 0x8
+#define WM5100_FLL_SRC_AIF2BCLK 0x9
+#define WM5100_FLL_SRC_AIF3BCLK 0xa
+
+/*
+ * Register values.
+ */
+#define WM5100_SOFTWARE_RESET 0x00
+#define WM5100_DEVICE_REVISION 0x01
+#define WM5100_CTRL_IF_1 0x10
+#define WM5100_TONE_GENERATOR_1 0x20
+#define WM5100_PWM_DRIVE_1 0x30
+#define WM5100_PWM_DRIVE_2 0x31
+#define WM5100_PWM_DRIVE_3 0x32
+#define WM5100_CLOCKING_1 0x100
+#define WM5100_CLOCKING_3 0x101
+#define WM5100_CLOCKING_4 0x102
+#define WM5100_CLOCKING_5 0x103
+#define WM5100_CLOCKING_6 0x104
+#define WM5100_CLOCKING_7 0x107
+#define WM5100_CLOCKING_8 0x108
+#define WM5100_ASRC_ENABLE 0x120
+#define WM5100_ASRC_STATUS 0x121
+#define WM5100_ASRC_RATE1 0x122
+#define WM5100_ISRC_1_CTRL_1 0x141
+#define WM5100_ISRC_1_CTRL_2 0x142
+#define WM5100_ISRC_2_CTRL1 0x143
+#define WM5100_ISRC_2_CTRL_2 0x144
+#define WM5100_FLL1_CONTROL_1 0x182
+#define WM5100_FLL1_CONTROL_2 0x183
+#define WM5100_FLL1_CONTROL_3 0x184
+#define WM5100_FLL1_CONTROL_5 0x186
+#define WM5100_FLL1_CONTROL_6 0x187
+#define WM5100_FLL1_EFS_1 0x188
+#define WM5100_FLL2_CONTROL_1 0x1A2
+#define WM5100_FLL2_CONTROL_2 0x1A3
+#define WM5100_FLL2_CONTROL_3 0x1A4
+#define WM5100_FLL2_CONTROL_5 0x1A6
+#define WM5100_FLL2_CONTROL_6 0x1A7
+#define WM5100_FLL2_EFS_1 0x1A8
+#define WM5100_MIC_CHARGE_PUMP_1 0x200
+#define WM5100_MIC_CHARGE_PUMP_2 0x201
+#define WM5100_HP_CHARGE_PUMP_1 0x202
+#define WM5100_LDO1_CONTROL 0x211
+#define WM5100_MIC_BIAS_CTRL_1 0x215
+#define WM5100_MIC_BIAS_CTRL_2 0x216
+#define WM5100_MIC_BIAS_CTRL_3 0x217
+#define WM5100_ACCESSORY_DETECT_MODE_1 0x280
+#define WM5100_HEADPHONE_DETECT_1 0x288
+#define WM5100_HEADPHONE_DETECT_2 0x289
+#define WM5100_MIC_DETECT_1 0x290
+#define WM5100_MIC_DETECT_2 0x291
+#define WM5100_MIC_DETECT_3 0x292
+#define WM5100_MISC_CONTROL 0x2BB
+#define WM5100_INPUT_ENABLES 0x301
+#define WM5100_INPUT_ENABLES_STATUS 0x302
+#define WM5100_IN1L_CONTROL 0x310
+#define WM5100_IN1R_CONTROL 0x311
+#define WM5100_IN2L_CONTROL 0x312
+#define WM5100_IN2R_CONTROL 0x313
+#define WM5100_IN3L_CONTROL 0x314
+#define WM5100_IN3R_CONTROL 0x315
+#define WM5100_IN4L_CONTROL 0x316
+#define WM5100_IN4R_CONTROL 0x317
+#define WM5100_RXANC_SRC 0x318
+#define WM5100_INPUT_VOLUME_RAMP 0x319
+#define WM5100_ADC_DIGITAL_VOLUME_1L 0x320
+#define WM5100_ADC_DIGITAL_VOLUME_1R 0x321
+#define WM5100_ADC_DIGITAL_VOLUME_2L 0x322
+#define WM5100_ADC_DIGITAL_VOLUME_2R 0x323
+#define WM5100_ADC_DIGITAL_VOLUME_3L 0x324
+#define WM5100_ADC_DIGITAL_VOLUME_3R 0x325
+#define WM5100_ADC_DIGITAL_VOLUME_4L 0x326
+#define WM5100_ADC_DIGITAL_VOLUME_4R 0x327
+#define WM5100_OUTPUT_ENABLES_2 0x401
+#define WM5100_OUTPUT_STATUS_1 0x402
+#define WM5100_OUTPUT_STATUS_2 0x403
+#define WM5100_CHANNEL_ENABLES_1 0x408
+#define WM5100_OUT_VOLUME_1L 0x410
+#define WM5100_OUT_VOLUME_1R 0x411
+#define WM5100_DAC_VOLUME_LIMIT_1L 0x412
+#define WM5100_DAC_VOLUME_LIMIT_1R 0x413
+#define WM5100_OUT_VOLUME_2L 0x414
+#define WM5100_OUT_VOLUME_2R 0x415
+#define WM5100_DAC_VOLUME_LIMIT_2L 0x416
+#define WM5100_DAC_VOLUME_LIMIT_2R 0x417
+#define WM5100_OUT_VOLUME_3L 0x418
+#define WM5100_OUT_VOLUME_3R 0x419
+#define WM5100_DAC_VOLUME_LIMIT_3L 0x41A
+#define WM5100_DAC_VOLUME_LIMIT_3R 0x41B
+#define WM5100_OUT_VOLUME_4L 0x41C
+#define WM5100_OUT_VOLUME_4R 0x41D
+#define WM5100_DAC_VOLUME_LIMIT_5L 0x41E
+#define WM5100_DAC_VOLUME_LIMIT_5R 0x41F
+#define WM5100_DAC_VOLUME_LIMIT_6L 0x420
+#define WM5100_DAC_VOLUME_LIMIT_6R 0x421
+#define WM5100_DAC_AEC_CONTROL_1 0x440
+#define WM5100_OUTPUT_VOLUME_RAMP 0x441
+#define WM5100_DAC_DIGITAL_VOLUME_1L 0x480
+#define WM5100_DAC_DIGITAL_VOLUME_1R 0x481
+#define WM5100_DAC_DIGITAL_VOLUME_2L 0x482
+#define WM5100_DAC_DIGITAL_VOLUME_2R 0x483
+#define WM5100_DAC_DIGITAL_VOLUME_3L 0x484
+#define WM5100_DAC_DIGITAL_VOLUME_3R 0x485
+#define WM5100_DAC_DIGITAL_VOLUME_4L 0x486
+#define WM5100_DAC_DIGITAL_VOLUME_4R 0x487
+#define WM5100_DAC_DIGITAL_VOLUME_5L 0x488
+#define WM5100_DAC_DIGITAL_VOLUME_5R 0x489
+#define WM5100_DAC_DIGITAL_VOLUME_6L 0x48A
+#define WM5100_DAC_DIGITAL_VOLUME_6R 0x48B
+#define WM5100_PDM_SPK1_CTRL_1 0x4C0
+#define WM5100_PDM_SPK1_CTRL_2 0x4C1
+#define WM5100_PDM_SPK2_CTRL_1 0x4C2
+#define WM5100_PDM_SPK2_CTRL_2 0x4C3
+#define WM5100_AUDIO_IF_1_1 0x500
+#define WM5100_AUDIO_IF_1_2 0x501
+#define WM5100_AUDIO_IF_1_3 0x502
+#define WM5100_AUDIO_IF_1_4 0x503
+#define WM5100_AUDIO_IF_1_5 0x504
+#define WM5100_AUDIO_IF_1_6 0x505
+#define WM5100_AUDIO_IF_1_7 0x506
+#define WM5100_AUDIO_IF_1_8 0x507
+#define WM5100_AUDIO_IF_1_9 0x508
+#define WM5100_AUDIO_IF_1_10 0x509
+#define WM5100_AUDIO_IF_1_11 0x50A
+#define WM5100_AUDIO_IF_1_12 0x50B
+#define WM5100_AUDIO_IF_1_13 0x50C
+#define WM5100_AUDIO_IF_1_14 0x50D
+#define WM5100_AUDIO_IF_1_15 0x50E
+#define WM5100_AUDIO_IF_1_16 0x50F
+#define WM5100_AUDIO_IF_1_17 0x510
+#define WM5100_AUDIO_IF_1_18 0x511
+#define WM5100_AUDIO_IF_1_19 0x512
+#define WM5100_AUDIO_IF_1_20 0x513
+#define WM5100_AUDIO_IF_1_21 0x514
+#define WM5100_AUDIO_IF_1_22 0x515
+#define WM5100_AUDIO_IF_1_23 0x516
+#define WM5100_AUDIO_IF_1_24 0x517
+#define WM5100_AUDIO_IF_1_25 0x518
+#define WM5100_AUDIO_IF_1_26 0x519
+#define WM5100_AUDIO_IF_1_27 0x51A
+#define WM5100_AUDIO_IF_2_1 0x540
+#define WM5100_AUDIO_IF_2_2 0x541
+#define WM5100_AUDIO_IF_2_3 0x542
+#define WM5100_AUDIO_IF_2_4 0x543
+#define WM5100_AUDIO_IF_2_5 0x544
+#define WM5100_AUDIO_IF_2_6 0x545
+#define WM5100_AUDIO_IF_2_7 0x546
+#define WM5100_AUDIO_IF_2_8 0x547
+#define WM5100_AUDIO_IF_2_9 0x548
+#define WM5100_AUDIO_IF_2_10 0x549
+#define WM5100_AUDIO_IF_2_11 0x54A
+#define WM5100_AUDIO_IF_2_18 0x551
+#define WM5100_AUDIO_IF_2_19 0x552
+#define WM5100_AUDIO_IF_2_26 0x559
+#define WM5100_AUDIO_IF_2_27 0x55A
+#define WM5100_AUDIO_IF_3_1 0x580
+#define WM5100_AUDIO_IF_3_2 0x581
+#define WM5100_AUDIO_IF_3_3 0x582
+#define WM5100_AUDIO_IF_3_4 0x583
+#define WM5100_AUDIO_IF_3_5 0x584
+#define WM5100_AUDIO_IF_3_6 0x585
+#define WM5100_AUDIO_IF_3_7 0x586
+#define WM5100_AUDIO_IF_3_8 0x587
+#define WM5100_AUDIO_IF_3_9 0x588
+#define WM5100_AUDIO_IF_3_10 0x589
+#define WM5100_AUDIO_IF_3_11 0x58A
+#define WM5100_AUDIO_IF_3_18 0x591
+#define WM5100_AUDIO_IF_3_19 0x592
+#define WM5100_AUDIO_IF_3_26 0x599
+#define WM5100_AUDIO_IF_3_27 0x59A
+#define WM5100_PWM1MIX_INPUT_1_SOURCE 0x640
+#define WM5100_PWM1MIX_INPUT_1_VOLUME 0x641
+#define WM5100_PWM1MIX_INPUT_2_SOURCE 0x642
+#define WM5100_PWM1MIX_INPUT_2_VOLUME 0x643
+#define WM5100_PWM1MIX_INPUT_3_SOURCE 0x644
+#define WM5100_PWM1MIX_INPUT_3_VOLUME 0x645
+#define WM5100_PWM1MIX_INPUT_4_SOURCE 0x646
+#define WM5100_PWM1MIX_INPUT_4_VOLUME 0x647
+#define WM5100_PWM2MIX_INPUT_1_SOURCE 0x648
+#define WM5100_PWM2MIX_INPUT_1_VOLUME 0x649
+#define WM5100_PWM2MIX_INPUT_2_SOURCE 0x64A
+#define WM5100_PWM2MIX_INPUT_2_VOLUME 0x64B
+#define WM5100_PWM2MIX_INPUT_3_SOURCE 0x64C
+#define WM5100_PWM2MIX_INPUT_3_VOLUME 0x64D
+#define WM5100_PWM2MIX_INPUT_4_SOURCE 0x64E
+#define WM5100_PWM2MIX_INPUT_4_VOLUME 0x64F
+#define WM5100_OUT1LMIX_INPUT_1_SOURCE 0x680
+#define WM5100_OUT1LMIX_INPUT_1_VOLUME 0x681
+#define WM5100_OUT1LMIX_INPUT_2_SOURCE 0x682
+#define WM5100_OUT1LMIX_INPUT_2_VOLUME 0x683
+#define WM5100_OUT1LMIX_INPUT_3_SOURCE 0x684
+#define WM5100_OUT1LMIX_INPUT_3_VOLUME 0x685
+#define WM5100_OUT1LMIX_INPUT_4_SOURCE 0x686
+#define WM5100_OUT1LMIX_INPUT_4_VOLUME 0x687
+#define WM5100_OUT1RMIX_INPUT_1_SOURCE 0x688
+#define WM5100_OUT1RMIX_INPUT_1_VOLUME 0x689
+#define WM5100_OUT1RMIX_INPUT_2_SOURCE 0x68A
+#define WM5100_OUT1RMIX_INPUT_2_VOLUME 0x68B
+#define WM5100_OUT1RMIX_INPUT_3_SOURCE 0x68C
+#define WM5100_OUT1RMIX_INPUT_3_VOLUME 0x68D
+#define WM5100_OUT1RMIX_INPUT_4_SOURCE 0x68E
+#define WM5100_OUT1RMIX_INPUT_4_VOLUME 0x68F
+#define WM5100_OUT2LMIX_INPUT_1_SOURCE 0x690
+#define WM5100_OUT2LMIX_INPUT_1_VOLUME 0x691
+#define WM5100_OUT2LMIX_INPUT_2_SOURCE 0x692
+#define WM5100_OUT2LMIX_INPUT_2_VOLUME 0x693
+#define WM5100_OUT2LMIX_INPUT_3_SOURCE 0x694
+#define WM5100_OUT2LMIX_INPUT_3_VOLUME 0x695
+#define WM5100_OUT2LMIX_INPUT_4_SOURCE 0x696
+#define WM5100_OUT2LMIX_INPUT_4_VOLUME 0x697
+#define WM5100_OUT2RMIX_INPUT_1_SOURCE 0x698
+#define WM5100_OUT2RMIX_INPUT_1_VOLUME 0x699
+#define WM5100_OUT2RMIX_INPUT_2_SOURCE 0x69A
+#define WM5100_OUT2RMIX_INPUT_2_VOLUME 0x69B
+#define WM5100_OUT2RMIX_INPUT_3_SOURCE 0x69C
+#define WM5100_OUT2RMIX_INPUT_3_VOLUME 0x69D
+#define WM5100_OUT2RMIX_INPUT_4_SOURCE 0x69E
+#define WM5100_OUT2RMIX_INPUT_4_VOLUME 0x69F
+#define WM5100_OUT3LMIX_INPUT_1_SOURCE 0x6A0
+#define WM5100_OUT3LMIX_INPUT_1_VOLUME 0x6A1
+#define WM5100_OUT3LMIX_INPUT_2_SOURCE 0x6A2
+#define WM5100_OUT3LMIX_INPUT_2_VOLUME 0x6A3
+#define WM5100_OUT3LMIX_INPUT_3_SOURCE 0x6A4
+#define WM5100_OUT3LMIX_INPUT_3_VOLUME 0x6A5
+#define WM5100_OUT3LMIX_INPUT_4_SOURCE 0x6A6
+#define WM5100_OUT3LMIX_INPUT_4_VOLUME 0x6A7
+#define WM5100_OUT3RMIX_INPUT_1_SOURCE 0x6A8
+#define WM5100_OUT3RMIX_INPUT_1_VOLUME 0x6A9
+#define WM5100_OUT3RMIX_INPUT_2_SOURCE 0x6AA
+#define WM5100_OUT3RMIX_INPUT_2_VOLUME 0x6AB
+#define WM5100_OUT3RMIX_INPUT_3_SOURCE 0x6AC
+#define WM5100_OUT3RMIX_INPUT_3_VOLUME 0x6AD
+#define WM5100_OUT3RMIX_INPUT_4_SOURCE 0x6AE
+#define WM5100_OUT3RMIX_INPUT_4_VOLUME 0x6AF
+#define WM5100_OUT4LMIX_INPUT_1_SOURCE 0x6B0
+#define WM5100_OUT4LMIX_INPUT_1_VOLUME 0x6B1
+#define WM5100_OUT4LMIX_INPUT_2_SOURCE 0x6B2
+#define WM5100_OUT4LMIX_INPUT_2_VOLUME 0x6B3
+#define WM5100_OUT4LMIX_INPUT_3_SOURCE 0x6B4
+#define WM5100_OUT4LMIX_INPUT_3_VOLUME 0x6B5
+#define WM5100_OUT4LMIX_INPUT_4_SOURCE 0x6B6
+#define WM5100_OUT4LMIX_INPUT_4_VOLUME 0x6B7
+#define WM5100_OUT4RMIX_INPUT_1_SOURCE 0x6B8
+#define WM5100_OUT4RMIX_INPUT_1_VOLUME 0x6B9
+#define WM5100_OUT4RMIX_INPUT_2_SOURCE 0x6BA
+#define WM5100_OUT4RMIX_INPUT_2_VOLUME 0x6BB
+#define WM5100_OUT4RMIX_INPUT_3_SOURCE 0x6BC
+#define WM5100_OUT4RMIX_INPUT_3_VOLUME 0x6BD
+#define WM5100_OUT4RMIX_INPUT_4_SOURCE 0x6BE
+#define WM5100_OUT4RMIX_INPUT_4_VOLUME 0x6BF
+#define WM5100_OUT5LMIX_INPUT_1_SOURCE 0x6C0
+#define WM5100_OUT5LMIX_INPUT_1_VOLUME 0x6C1
+#define WM5100_OUT5LMIX_INPUT_2_SOURCE 0x6C2
+#define WM5100_OUT5LMIX_INPUT_2_VOLUME 0x6C3
+#define WM5100_OUT5LMIX_INPUT_3_SOURCE 0x6C4
+#define WM5100_OUT5LMIX_INPUT_3_VOLUME 0x6C5
+#define WM5100_OUT5LMIX_INPUT_4_SOURCE 0x6C6
+#define WM5100_OUT5LMIX_INPUT_4_VOLUME 0x6C7
+#define WM5100_OUT5RMIX_INPUT_1_SOURCE 0x6C8
+#define WM5100_OUT5RMIX_INPUT_1_VOLUME 0x6C9
+#define WM5100_OUT5RMIX_INPUT_2_SOURCE 0x6CA
+#define WM5100_OUT5RMIX_INPUT_2_VOLUME 0x6CB
+#define WM5100_OUT5RMIX_INPUT_3_SOURCE 0x6CC
+#define WM5100_OUT5RMIX_INPUT_3_VOLUME 0x6CD
+#define WM5100_OUT5RMIX_INPUT_4_SOURCE 0x6CE
+#define WM5100_OUT5RMIX_INPUT_4_VOLUME 0x6CF
+#define WM5100_OUT6LMIX_INPUT_1_SOURCE 0x6D0
+#define WM5100_OUT6LMIX_INPUT_1_VOLUME 0x6D1
+#define WM5100_OUT6LMIX_INPUT_2_SOURCE 0x6D2
+#define WM5100_OUT6LMIX_INPUT_2_VOLUME 0x6D3
+#define WM5100_OUT6LMIX_INPUT_3_SOURCE 0x6D4
+#define WM5100_OUT6LMIX_INPUT_3_VOLUME 0x6D5
+#define WM5100_OUT6LMIX_INPUT_4_SOURCE 0x6D6
+#define WM5100_OUT6LMIX_INPUT_4_VOLUME 0x6D7
+#define WM5100_OUT6RMIX_INPUT_1_SOURCE 0x6D8
+#define WM5100_OUT6RMIX_INPUT_1_VOLUME 0x6D9
+#define WM5100_OUT6RMIX_INPUT_2_SOURCE 0x6DA
+#define WM5100_OUT6RMIX_INPUT_2_VOLUME 0x6DB
+#define WM5100_OUT6RMIX_INPUT_3_SOURCE 0x6DC
+#define WM5100_OUT6RMIX_INPUT_3_VOLUME 0x6DD
+#define WM5100_OUT6RMIX_INPUT_4_SOURCE 0x6DE
+#define WM5100_OUT6RMIX_INPUT_4_VOLUME 0x6DF
+#define WM5100_AIF1TX1MIX_INPUT_1_SOURCE 0x700
+#define WM5100_AIF1TX1MIX_INPUT_1_VOLUME 0x701
+#define WM5100_AIF1TX1MIX_INPUT_2_SOURCE 0x702
+#define WM5100_AIF1TX1MIX_INPUT_2_VOLUME 0x703
+#define WM5100_AIF1TX1MIX_INPUT_3_SOURCE 0x704
+#define WM5100_AIF1TX1MIX_INPUT_3_VOLUME 0x705
+#define WM5100_AIF1TX1MIX_INPUT_4_SOURCE 0x706
+#define WM5100_AIF1TX1MIX_INPUT_4_VOLUME 0x707
+#define WM5100_AIF1TX2MIX_INPUT_1_SOURCE 0x708
+#define WM5100_AIF1TX2MIX_INPUT_1_VOLUME 0x709
+#define WM5100_AIF1TX2MIX_INPUT_2_SOURCE 0x70A
+#define WM5100_AIF1TX2MIX_INPUT_2_VOLUME 0x70B
+#define WM5100_AIF1TX2MIX_INPUT_3_SOURCE 0x70C
+#define WM5100_AIF1TX2MIX_INPUT_3_VOLUME 0x70D
+#define WM5100_AIF1TX2MIX_INPUT_4_SOURCE 0x70E
+#define WM5100_AIF1TX2MIX_INPUT_4_VOLUME 0x70F
+#define WM5100_AIF1TX3MIX_INPUT_1_SOURCE 0x710
+#define WM5100_AIF1TX3MIX_INPUT_1_VOLUME 0x711
+#define WM5100_AIF1TX3MIX_INPUT_2_SOURCE 0x712
+#define WM5100_AIF1TX3MIX_INPUT_2_VOLUME 0x713
+#define WM5100_AIF1TX3MIX_INPUT_3_SOURCE 0x714
+#define WM5100_AIF1TX3MIX_INPUT_3_VOLUME 0x715
+#define WM5100_AIF1TX3MIX_INPUT_4_SOURCE 0x716
+#define WM5100_AIF1TX3MIX_INPUT_4_VOLUME 0x717
+#define WM5100_AIF1TX4MIX_INPUT_1_SOURCE 0x718
+#define WM5100_AIF1TX4MIX_INPUT_1_VOLUME 0x719
+#define WM5100_AIF1TX4MIX_INPUT_2_SOURCE 0x71A
+#define WM5100_AIF1TX4MIX_INPUT_2_VOLUME 0x71B
+#define WM5100_AIF1TX4MIX_INPUT_3_SOURCE 0x71C
+#define WM5100_AIF1TX4MIX_INPUT_3_VOLUME 0x71D
+#define WM5100_AIF1TX4MIX_INPUT_4_SOURCE 0x71E
+#define WM5100_AIF1TX4MIX_INPUT_4_VOLUME 0x71F
+#define WM5100_AIF1TX5MIX_INPUT_1_SOURCE 0x720
+#define WM5100_AIF1TX5MIX_INPUT_1_VOLUME 0x721
+#define WM5100_AIF1TX5MIX_INPUT_2_SOURCE 0x722
+#define WM5100_AIF1TX5MIX_INPUT_2_VOLUME 0x723
+#define WM5100_AIF1TX5MIX_INPUT_3_SOURCE 0x724
+#define WM5100_AIF1TX5MIX_INPUT_3_VOLUME 0x725
+#define WM5100_AIF1TX5MIX_INPUT_4_SOURCE 0x726
+#define WM5100_AIF1TX5MIX_INPUT_4_VOLUME 0x727
+#define WM5100_AIF1TX6MIX_INPUT_1_SOURCE 0x728
+#define WM5100_AIF1TX6MIX_INPUT_1_VOLUME 0x729
+#define WM5100_AIF1TX6MIX_INPUT_2_SOURCE 0x72A
+#define WM5100_AIF1TX6MIX_INPUT_2_VOLUME 0x72B
+#define WM5100_AIF1TX6MIX_INPUT_3_SOURCE 0x72C
+#define WM5100_AIF1TX6MIX_INPUT_3_VOLUME 0x72D
+#define WM5100_AIF1TX6MIX_INPUT_4_SOURCE 0x72E
+#define WM5100_AIF1TX6MIX_INPUT_4_VOLUME 0x72F
+#define WM5100_AIF1TX7MIX_INPUT_1_SOURCE 0x730
+#define WM5100_AIF1TX7MIX_INPUT_1_VOLUME 0x731
+#define WM5100_AIF1TX7MIX_INPUT_2_SOURCE 0x732
+#define WM5100_AIF1TX7MIX_INPUT_2_VOLUME 0x733
+#define WM5100_AIF1TX7MIX_INPUT_3_SOURCE 0x734
+#define WM5100_AIF1TX7MIX_INPUT_3_VOLUME 0x735
+#define WM5100_AIF1TX7MIX_INPUT_4_SOURCE 0x736
+#define WM5100_AIF1TX7MIX_INPUT_4_VOLUME 0x737
+#define WM5100_AIF1TX8MIX_INPUT_1_SOURCE 0x738
+#define WM5100_AIF1TX8MIX_INPUT_1_VOLUME 0x739
+#define WM5100_AIF1TX8MIX_INPUT_2_SOURCE 0x73A
+#define WM5100_AIF1TX8MIX_INPUT_2_VOLUME 0x73B
+#define WM5100_AIF1TX8MIX_INPUT_3_SOURCE 0x73C
+#define WM5100_AIF1TX8MIX_INPUT_3_VOLUME 0x73D
+#define WM5100_AIF1TX8MIX_INPUT_4_SOURCE 0x73E
+#define WM5100_AIF1TX8MIX_INPUT_4_VOLUME 0x73F
+#define WM5100_AIF2TX1MIX_INPUT_1_SOURCE 0x740
+#define WM5100_AIF2TX1MIX_INPUT_1_VOLUME 0x741
+#define WM5100_AIF2TX1MIX_INPUT_2_SOURCE 0x742
+#define WM5100_AIF2TX1MIX_INPUT_2_VOLUME 0x743
+#define WM5100_AIF2TX1MIX_INPUT_3_SOURCE 0x744
+#define WM5100_AIF2TX1MIX_INPUT_3_VOLUME 0x745
+#define WM5100_AIF2TX1MIX_INPUT_4_SOURCE 0x746
+#define WM5100_AIF2TX1MIX_INPUT_4_VOLUME 0x747
+#define WM5100_AIF2TX2MIX_INPUT_1_SOURCE 0x748
+#define WM5100_AIF2TX2MIX_INPUT_1_VOLUME 0x749
+#define WM5100_AIF2TX2MIX_INPUT_2_SOURCE 0x74A
+#define WM5100_AIF2TX2MIX_INPUT_2_VOLUME 0x74B
+#define WM5100_AIF2TX2MIX_INPUT_3_SOURCE 0x74C
+#define WM5100_AIF2TX2MIX_INPUT_3_VOLUME 0x74D
+#define WM5100_AIF2TX2MIX_INPUT_4_SOURCE 0x74E
+#define WM5100_AIF2TX2MIX_INPUT_4_VOLUME 0x74F
+#define WM5100_AIF3TX1MIX_INPUT_1_SOURCE 0x780
+#define WM5100_AIF3TX1MIX_INPUT_1_VOLUME 0x781
+#define WM5100_AIF3TX1MIX_INPUT_2_SOURCE 0x782
+#define WM5100_AIF3TX1MIX_INPUT_2_VOLUME 0x783
+#define WM5100_AIF3TX1MIX_INPUT_3_SOURCE 0x784
+#define WM5100_AIF3TX1MIX_INPUT_3_VOLUME 0x785
+#define WM5100_AIF3TX1MIX_INPUT_4_SOURCE 0x786
+#define WM5100_AIF3TX1MIX_INPUT_4_VOLUME 0x787
+#define WM5100_AIF3TX2MIX_INPUT_1_SOURCE 0x788
+#define WM5100_AIF3TX2MIX_INPUT_1_VOLUME 0x789
+#define WM5100_AIF3TX2MIX_INPUT_2_SOURCE 0x78A
+#define WM5100_AIF3TX2MIX_INPUT_2_VOLUME 0x78B
+#define WM5100_AIF3TX2MIX_INPUT_3_SOURCE 0x78C
+#define WM5100_AIF3TX2MIX_INPUT_3_VOLUME 0x78D
+#define WM5100_AIF3TX2MIX_INPUT_4_SOURCE 0x78E
+#define WM5100_AIF3TX2MIX_INPUT_4_VOLUME 0x78F
+#define WM5100_EQ1MIX_INPUT_1_SOURCE 0x880
+#define WM5100_EQ1MIX_INPUT_1_VOLUME 0x881
+#define WM5100_EQ1MIX_INPUT_2_SOURCE 0x882
+#define WM5100_EQ1MIX_INPUT_2_VOLUME 0x883
+#define WM5100_EQ1MIX_INPUT_3_SOURCE 0x884
+#define WM5100_EQ1MIX_INPUT_3_VOLUME 0x885
+#define WM5100_EQ1MIX_INPUT_4_SOURCE 0x886
+#define WM5100_EQ1MIX_INPUT_4_VOLUME 0x887
+#define WM5100_EQ2MIX_INPUT_1_SOURCE 0x888
+#define WM5100_EQ2MIX_INPUT_1_VOLUME 0x889
+#define WM5100_EQ2MIX_INPUT_2_SOURCE 0x88A
+#define WM5100_EQ2MIX_INPUT_2_VOLUME 0x88B
+#define WM5100_EQ2MIX_INPUT_3_SOURCE 0x88C
+#define WM5100_EQ2MIX_INPUT_3_VOLUME 0x88D
+#define WM5100_EQ2MIX_INPUT_4_SOURCE 0x88E
+#define WM5100_EQ2MIX_INPUT_4_VOLUME 0x88F
+#define WM5100_EQ3MIX_INPUT_1_SOURCE 0x890
+#define WM5100_EQ3MIX_INPUT_1_VOLUME 0x891
+#define WM5100_EQ3MIX_INPUT_2_SOURCE 0x892
+#define WM5100_EQ3MIX_INPUT_2_VOLUME 0x893
+#define WM5100_EQ3MIX_INPUT_3_SOURCE 0x894
+#define WM5100_EQ3MIX_INPUT_3_VOLUME 0x895
+#define WM5100_EQ3MIX_INPUT_4_SOURCE 0x896
+#define WM5100_EQ3MIX_INPUT_4_VOLUME 0x897
+#define WM5100_EQ4MIX_INPUT_1_SOURCE 0x898
+#define WM5100_EQ4MIX_INPUT_1_VOLUME 0x899
+#define WM5100_EQ4MIX_INPUT_2_SOURCE 0x89A
+#define WM5100_EQ4MIX_INPUT_2_VOLUME 0x89B
+#define WM5100_EQ4MIX_INPUT_3_SOURCE 0x89C
+#define WM5100_EQ4MIX_INPUT_3_VOLUME 0x89D
+#define WM5100_EQ4MIX_INPUT_4_SOURCE 0x89E
+#define WM5100_EQ4MIX_INPUT_4_VOLUME 0x89F
+#define WM5100_DRC1LMIX_INPUT_1_SOURCE 0x8C0
+#define WM5100_DRC1LMIX_INPUT_1_VOLUME 0x8C1
+#define WM5100_DRC1LMIX_INPUT_2_SOURCE 0x8C2
+#define WM5100_DRC1LMIX_INPUT_2_VOLUME 0x8C3
+#define WM5100_DRC1LMIX_INPUT_3_SOURCE 0x8C4
+#define WM5100_DRC1LMIX_INPUT_3_VOLUME 0x8C5
+#define WM5100_DRC1LMIX_INPUT_4_SOURCE 0x8C6
+#define WM5100_DRC1LMIX_INPUT_4_VOLUME 0x8C7
+#define WM5100_DRC1RMIX_INPUT_1_SOURCE 0x8C8
+#define WM5100_DRC1RMIX_INPUT_1_VOLUME 0x8C9
+#define WM5100_DRC1RMIX_INPUT_2_SOURCE 0x8CA
+#define WM5100_DRC1RMIX_INPUT_2_VOLUME 0x8CB
+#define WM5100_DRC1RMIX_INPUT_3_SOURCE 0x8CC
+#define WM5100_DRC1RMIX_INPUT_3_VOLUME 0x8CD
+#define WM5100_DRC1RMIX_INPUT_4_SOURCE 0x8CE
+#define WM5100_DRC1RMIX_INPUT_4_VOLUME 0x8CF
+#define WM5100_HPLP1MIX_INPUT_1_SOURCE 0x900
+#define WM5100_HPLP1MIX_INPUT_1_VOLUME 0x901
+#define WM5100_HPLP1MIX_INPUT_2_SOURCE 0x902
+#define WM5100_HPLP1MIX_INPUT_2_VOLUME 0x903
+#define WM5100_HPLP1MIX_INPUT_3_SOURCE 0x904
+#define WM5100_HPLP1MIX_INPUT_3_VOLUME 0x905
+#define WM5100_HPLP1MIX_INPUT_4_SOURCE 0x906
+#define WM5100_HPLP1MIX_INPUT_4_VOLUME 0x907
+#define WM5100_HPLP2MIX_INPUT_1_SOURCE 0x908
+#define WM5100_HPLP2MIX_INPUT_1_VOLUME 0x909
+#define WM5100_HPLP2MIX_INPUT_2_SOURCE 0x90A
+#define WM5100_HPLP2MIX_INPUT_2_VOLUME 0x90B
+#define WM5100_HPLP2MIX_INPUT_3_SOURCE 0x90C
+#define WM5100_HPLP2MIX_INPUT_3_VOLUME 0x90D
+#define WM5100_HPLP2MIX_INPUT_4_SOURCE 0x90E
+#define WM5100_HPLP2MIX_INPUT_4_VOLUME 0x90F
+#define WM5100_HPLP3MIX_INPUT_1_SOURCE 0x910
+#define WM5100_HPLP3MIX_INPUT_1_VOLUME 0x911
+#define WM5100_HPLP3MIX_INPUT_2_SOURCE 0x912
+#define WM5100_HPLP3MIX_INPUT_2_VOLUME 0x913
+#define WM5100_HPLP3MIX_INPUT_3_SOURCE 0x914
+#define WM5100_HPLP3MIX_INPUT_3_VOLUME 0x915
+#define WM5100_HPLP3MIX_INPUT_4_SOURCE 0x916
+#define WM5100_HPLP3MIX_INPUT_4_VOLUME 0x917
+#define WM5100_HPLP4MIX_INPUT_1_SOURCE 0x918
+#define WM5100_HPLP4MIX_INPUT_1_VOLUME 0x919
+#define WM5100_HPLP4MIX_INPUT_2_SOURCE 0x91A
+#define WM5100_HPLP4MIX_INPUT_2_VOLUME 0x91B
+#define WM5100_HPLP4MIX_INPUT_3_SOURCE 0x91C
+#define WM5100_HPLP4MIX_INPUT_3_VOLUME 0x91D
+#define WM5100_HPLP4MIX_INPUT_4_SOURCE 0x91E
+#define WM5100_HPLP4MIX_INPUT_4_VOLUME 0x91F
+#define WM5100_DSP1LMIX_INPUT_1_SOURCE 0x940
+#define WM5100_DSP1LMIX_INPUT_1_VOLUME 0x941
+#define WM5100_DSP1LMIX_INPUT_2_SOURCE 0x942
+#define WM5100_DSP1LMIX_INPUT_2_VOLUME 0x943
+#define WM5100_DSP1LMIX_INPUT_3_SOURCE 0x944
+#define WM5100_DSP1LMIX_INPUT_3_VOLUME 0x945
+#define WM5100_DSP1LMIX_INPUT_4_SOURCE 0x946
+#define WM5100_DSP1LMIX_INPUT_4_VOLUME 0x947
+#define WM5100_DSP1RMIX_INPUT_1_SOURCE 0x948
+#define WM5100_DSP1RMIX_INPUT_1_VOLUME 0x949
+#define WM5100_DSP1RMIX_INPUT_2_SOURCE 0x94A
+#define WM5100_DSP1RMIX_INPUT_2_VOLUME 0x94B
+#define WM5100_DSP1RMIX_INPUT_3_SOURCE 0x94C
+#define WM5100_DSP1RMIX_INPUT_3_VOLUME 0x94D
+#define WM5100_DSP1RMIX_INPUT_4_SOURCE 0x94E
+#define WM5100_DSP1RMIX_INPUT_4_VOLUME 0x94F
+#define WM5100_DSP1AUX1MIX_INPUT_1_SOURCE 0x950
+#define WM5100_DSP1AUX2MIX_INPUT_1_SOURCE 0x958
+#define WM5100_DSP1AUX3MIX_INPUT_1_SOURCE 0x960
+#define WM5100_DSP1AUX4MIX_INPUT_1_SOURCE 0x968
+#define WM5100_DSP1AUX5MIX_INPUT_1_SOURCE 0x970
+#define WM5100_DSP1AUX6MIX_INPUT_1_SOURCE 0x978
+#define WM5100_DSP2LMIX_INPUT_1_SOURCE 0x980
+#define WM5100_DSP2LMIX_INPUT_1_VOLUME 0x981
+#define WM5100_DSP2LMIX_INPUT_2_SOURCE 0x982
+#define WM5100_DSP2LMIX_INPUT_2_VOLUME 0x983
+#define WM5100_DSP2LMIX_INPUT_3_SOURCE 0x984
+#define WM5100_DSP2LMIX_INPUT_3_VOLUME 0x985
+#define WM5100_DSP2LMIX_INPUT_4_SOURCE 0x986
+#define WM5100_DSP2LMIX_INPUT_4_VOLUME 0x987
+#define WM5100_DSP2RMIX_INPUT_1_SOURCE 0x988
+#define WM5100_DSP2RMIX_INPUT_1_VOLUME 0x989
+#define WM5100_DSP2RMIX_INPUT_2_SOURCE 0x98A
+#define WM5100_DSP2RMIX_INPUT_2_VOLUME 0x98B
+#define WM5100_DSP2RMIX_INPUT_3_SOURCE 0x98C
+#define WM5100_DSP2RMIX_INPUT_3_VOLUME 0x98D
+#define WM5100_DSP2RMIX_INPUT_4_SOURCE 0x98E
+#define WM5100_DSP2RMIX_INPUT_4_VOLUME 0x98F
+#define WM5100_DSP2AUX1MIX_INPUT_1_SOURCE 0x990
+#define WM5100_DSP2AUX2MIX_INPUT_1_SOURCE 0x998
+#define WM5100_DSP2AUX3MIX_INPUT_1_SOURCE 0x9A0
+#define WM5100_DSP2AUX4MIX_INPUT_1_SOURCE 0x9A8
+#define WM5100_DSP2AUX5MIX_INPUT_1_SOURCE 0x9B0
+#define WM5100_DSP2AUX6MIX_INPUT_1_SOURCE 0x9B8
+#define WM5100_DSP3LMIX_INPUT_1_SOURCE 0x9C0
+#define WM5100_DSP3LMIX_INPUT_1_VOLUME 0x9C1
+#define WM5100_DSP3LMIX_INPUT_2_SOURCE 0x9C2
+#define WM5100_DSP3LMIX_INPUT_2_VOLUME 0x9C3
+#define WM5100_DSP3LMIX_INPUT_3_SOURCE 0x9C4
+#define WM5100_DSP3LMIX_INPUT_3_VOLUME 0x9C5
+#define WM5100_DSP3LMIX_INPUT_4_SOURCE 0x9C6
+#define WM5100_DSP3LMIX_INPUT_4_VOLUME 0x9C7
+#define WM5100_DSP3RMIX_INPUT_1_SOURCE 0x9C8
+#define WM5100_DSP3RMIX_INPUT_1_VOLUME 0x9C9
+#define WM5100_DSP3RMIX_INPUT_2_SOURCE 0x9CA
+#define WM5100_DSP3RMIX_INPUT_2_VOLUME 0x9CB
+#define WM5100_DSP3RMIX_INPUT_3_SOURCE 0x9CC
+#define WM5100_DSP3RMIX_INPUT_3_VOLUME 0x9CD
+#define WM5100_DSP3RMIX_INPUT_4_SOURCE 0x9CE
+#define WM5100_DSP3RMIX_INPUT_4_VOLUME 0x9CF
+#define WM5100_DSP3AUX1MIX_INPUT_1_SOURCE 0x9D0
+#define WM5100_DSP3AUX2MIX_INPUT_1_SOURCE 0x9D8
+#define WM5100_DSP3AUX3MIX_INPUT_1_SOURCE 0x9E0
+#define WM5100_DSP3AUX4MIX_INPUT_1_SOURCE 0x9E8
+#define WM5100_DSP3AUX5MIX_INPUT_1_SOURCE 0x9F0
+#define WM5100_DSP3AUX6MIX_INPUT_1_SOURCE 0x9F8
+#define WM5100_ASRC1LMIX_INPUT_1_SOURCE 0xA80
+#define WM5100_ASRC1RMIX_INPUT_1_SOURCE 0xA88
+#define WM5100_ASRC2LMIX_INPUT_1_SOURCE 0xA90
+#define WM5100_ASRC2RMIX_INPUT_1_SOURCE 0xA98
+#define WM5100_ISRC1DEC1MIX_INPUT_1_SOURCE 0xB00
+#define WM5100_ISRC1DEC2MIX_INPUT_1_SOURCE 0xB08
+#define WM5100_ISRC1DEC3MIX_INPUT_1_SOURCE 0xB10
+#define WM5100_ISRC1DEC4MIX_INPUT_1_SOURCE 0xB18
+#define WM5100_ISRC1INT1MIX_INPUT_1_SOURCE 0xB20
+#define WM5100_ISRC1INT2MIX_INPUT_1_SOURCE 0xB28
+#define WM5100_ISRC1INT3MIX_INPUT_1_SOURCE 0xB30
+#define WM5100_ISRC1INT4MIX_INPUT_1_SOURCE 0xB38
+#define WM5100_ISRC2DEC1MIX_INPUT_1_SOURCE 0xB40
+#define WM5100_ISRC2DEC2MIX_INPUT_1_SOURCE 0xB48
+#define WM5100_ISRC2DEC3MIX_INPUT_1_SOURCE 0xB50
+#define WM5100_ISRC2DEC4MIX_INPUT_1_SOURCE 0xB58
+#define WM5100_ISRC2INT1MIX_INPUT_1_SOURCE 0xB60
+#define WM5100_ISRC2INT2MIX_INPUT_1_SOURCE 0xB68
+#define WM5100_ISRC2INT3MIX_INPUT_1_SOURCE 0xB70
+#define WM5100_ISRC2INT4MIX_INPUT_1_SOURCE 0xB78
+#define WM5100_GPIO_CTRL_1 0xC00
+#define WM5100_GPIO_CTRL_2 0xC01
+#define WM5100_GPIO_CTRL_3 0xC02
+#define WM5100_GPIO_CTRL_4 0xC03
+#define WM5100_GPIO_CTRL_5 0xC04
+#define WM5100_GPIO_CTRL_6 0xC05
+#define WM5100_MISC_PAD_CTRL_1 0xC23
+#define WM5100_MISC_PAD_CTRL_2 0xC24
+#define WM5100_MISC_PAD_CTRL_3 0xC25
+#define WM5100_MISC_PAD_CTRL_4 0xC26
+#define WM5100_MISC_PAD_CTRL_5 0xC27
+#define WM5100_MISC_GPIO_1 0xC28
+#define WM5100_INTERRUPT_STATUS_1 0xD00
+#define WM5100_INTERRUPT_STATUS_2 0xD01
+#define WM5100_INTERRUPT_STATUS_3 0xD02
+#define WM5100_INTERRUPT_STATUS_4 0xD03
+#define WM5100_INTERRUPT_RAW_STATUS_2 0xD04
+#define WM5100_INTERRUPT_RAW_STATUS_3 0xD05
+#define WM5100_INTERRUPT_RAW_STATUS_4 0xD06
+#define WM5100_INTERRUPT_STATUS_1_MASK 0xD07
+#define WM5100_INTERRUPT_STATUS_2_MASK 0xD08
+#define WM5100_INTERRUPT_STATUS_3_MASK 0xD09
+#define WM5100_INTERRUPT_STATUS_4_MASK 0xD0A
+#define WM5100_INTERRUPT_CONTROL 0xD1F
+#define WM5100_IRQ_DEBOUNCE_1 0xD20
+#define WM5100_IRQ_DEBOUNCE_2 0xD21
+#define WM5100_FX_CTRL 0xE00
+#define WM5100_EQ1_1 0xE10
+#define WM5100_EQ1_2 0xE11
+#define WM5100_EQ1_3 0xE12
+#define WM5100_EQ1_4 0xE13
+#define WM5100_EQ1_5 0xE14
+#define WM5100_EQ1_6 0xE15
+#define WM5100_EQ1_7 0xE16
+#define WM5100_EQ1_8 0xE17
+#define WM5100_EQ1_9 0xE18
+#define WM5100_EQ1_10 0xE19
+#define WM5100_EQ1_11 0xE1A
+#define WM5100_EQ1_12 0xE1B
+#define WM5100_EQ1_13 0xE1C
+#define WM5100_EQ1_14 0xE1D
+#define WM5100_EQ1_15 0xE1E
+#define WM5100_EQ1_16 0xE1F
+#define WM5100_EQ1_17 0xE20
+#define WM5100_EQ1_18 0xE21
+#define WM5100_EQ1_19 0xE22
+#define WM5100_EQ1_20 0xE23
+#define WM5100_EQ2_1 0xE26
+#define WM5100_EQ2_2 0xE27
+#define WM5100_EQ2_3 0xE28
+#define WM5100_EQ2_4 0xE29
+#define WM5100_EQ2_5 0xE2A
+#define WM5100_EQ2_6 0xE2B
+#define WM5100_EQ2_7 0xE2C
+#define WM5100_EQ2_8 0xE2D
+#define WM5100_EQ2_9 0xE2E
+#define WM5100_EQ2_10 0xE2F
+#define WM5100_EQ2_11 0xE30
+#define WM5100_EQ2_12 0xE31
+#define WM5100_EQ2_13 0xE32
+#define WM5100_EQ2_14 0xE33
+#define WM5100_EQ2_15 0xE34
+#define WM5100_EQ2_16 0xE35
+#define WM5100_EQ2_17 0xE36
+#define WM5100_EQ2_18 0xE37
+#define WM5100_EQ2_19 0xE38
+#define WM5100_EQ2_20 0xE39
+#define WM5100_EQ3_1 0xE3C
+#define WM5100_EQ3_2 0xE3D
+#define WM5100_EQ3_3 0xE3E
+#define WM5100_EQ3_4 0xE3F
+#define WM5100_EQ3_5 0xE40
+#define WM5100_EQ3_6 0xE41
+#define WM5100_EQ3_7 0xE42
+#define WM5100_EQ3_8 0xE43
+#define WM5100_EQ3_9 0xE44
+#define WM5100_EQ3_10 0xE45
+#define WM5100_EQ3_11 0xE46
+#define WM5100_EQ3_12 0xE47
+#define WM5100_EQ3_13 0xE48
+#define WM5100_EQ3_14 0xE49
+#define WM5100_EQ3_15 0xE4A
+#define WM5100_EQ3_16 0xE4B
+#define WM5100_EQ3_17 0xE4C
+#define WM5100_EQ3_18 0xE4D
+#define WM5100_EQ3_19 0xE4E
+#define WM5100_EQ3_20 0xE4F
+#define WM5100_EQ4_1 0xE52
+#define WM5100_EQ4_2 0xE53
+#define WM5100_EQ4_3 0xE54
+#define WM5100_EQ4_4 0xE55
+#define WM5100_EQ4_5 0xE56
+#define WM5100_EQ4_6 0xE57
+#define WM5100_EQ4_7 0xE58
+#define WM5100_EQ4_8 0xE59
+#define WM5100_EQ4_9 0xE5A
+#define WM5100_EQ4_10 0xE5B
+#define WM5100_EQ4_11 0xE5C
+#define WM5100_EQ4_12 0xE5D
+#define WM5100_EQ4_13 0xE5E
+#define WM5100_EQ4_14 0xE5F
+#define WM5100_EQ4_15 0xE60
+#define WM5100_EQ4_16 0xE61
+#define WM5100_EQ4_17 0xE62
+#define WM5100_EQ4_18 0xE63
+#define WM5100_EQ4_19 0xE64
+#define WM5100_EQ4_20 0xE65
+#define WM5100_DRC1_CTRL1 0xE80
+#define WM5100_DRC1_CTRL2 0xE81
+#define WM5100_DRC1_CTRL3 0xE82
+#define WM5100_DRC1_CTRL4 0xE83
+#define WM5100_DRC1_CTRL5 0xE84
+#define WM5100_HPLPF1_1 0xEC0
+#define WM5100_HPLPF1_2 0xEC1
+#define WM5100_HPLPF2_1 0xEC4
+#define WM5100_HPLPF2_2 0xEC5
+#define WM5100_HPLPF3_1 0xEC8
+#define WM5100_HPLPF3_2 0xEC9
+#define WM5100_HPLPF4_1 0xECC
+#define WM5100_HPLPF4_2 0xECD
+#define WM5100_DSP1_DM_0 0x4000
+#define WM5100_DSP1_DM_1 0x4001
+#define WM5100_DSP1_DM_2 0x4002
+#define WM5100_DSP1_DM_3 0x4003
+#define WM5100_DSP1_DM_508 0x41FC
+#define WM5100_DSP1_DM_509 0x41FD
+#define WM5100_DSP1_DM_510 0x41FE
+#define WM5100_DSP1_DM_511 0x41FF
+#define WM5100_DSP1_PM_0 0x4800
+#define WM5100_DSP1_PM_1 0x4801
+#define WM5100_DSP1_PM_2 0x4802
+#define WM5100_DSP1_PM_3 0x4803
+#define WM5100_DSP1_PM_4 0x4804
+#define WM5100_DSP1_PM_5 0x4805
+#define WM5100_DSP1_PM_1530 0x4DFA
+#define WM5100_DSP1_PM_1531 0x4DFB
+#define WM5100_DSP1_PM_1532 0x4DFC
+#define WM5100_DSP1_PM_1533 0x4DFD
+#define WM5100_DSP1_PM_1534 0x4DFE
+#define WM5100_DSP1_PM_1535 0x4DFF
+#define WM5100_DSP1_ZM_0 0x5000
+#define WM5100_DSP1_ZM_1 0x5001
+#define WM5100_DSP1_ZM_2 0x5002
+#define WM5100_DSP1_ZM_3 0x5003
+#define WM5100_DSP1_ZM_2044 0x57FC
+#define WM5100_DSP1_ZM_2045 0x57FD
+#define WM5100_DSP1_ZM_2046 0x57FE
+#define WM5100_DSP1_ZM_2047 0x57FF
+#define WM5100_DSP2_DM_0 0x6000
+#define WM5100_DSP2_DM_1 0x6001
+#define WM5100_DSP2_DM_2 0x6002
+#define WM5100_DSP2_DM_3 0x6003
+#define WM5100_DSP2_DM_508 0x61FC
+#define WM5100_DSP2_DM_509 0x61FD
+#define WM5100_DSP2_DM_510 0x61FE
+#define WM5100_DSP2_DM_511 0x61FF
+#define WM5100_DSP2_PM_0 0x6800
+#define WM5100_DSP2_PM_1 0x6801
+#define WM5100_DSP2_PM_2 0x6802
+#define WM5100_DSP2_PM_3 0x6803
+#define WM5100_DSP2_PM_4 0x6804
+#define WM5100_DSP2_PM_5 0x6805
+#define WM5100_DSP2_PM_1530 0x6DFA
+#define WM5100_DSP2_PM_1531 0x6DFB
+#define WM5100_DSP2_PM_1532 0x6DFC
+#define WM5100_DSP2_PM_1533 0x6DFD
+#define WM5100_DSP2_PM_1534 0x6DFE
+#define WM5100_DSP2_PM_1535 0x6DFF
+#define WM5100_DSP2_ZM_0 0x7000
+#define WM5100_DSP2_ZM_1 0x7001
+#define WM5100_DSP2_ZM_2 0x7002
+#define WM5100_DSP2_ZM_3 0x7003
+#define WM5100_DSP2_ZM_2044 0x77FC
+#define WM5100_DSP2_ZM_2045 0x77FD
+#define WM5100_DSP2_ZM_2046 0x77FE
+#define WM5100_DSP2_ZM_2047 0x77FF
+#define WM5100_DSP3_DM_0 0x8000
+#define WM5100_DSP3_DM_1 0x8001
+#define WM5100_DSP3_DM_2 0x8002
+#define WM5100_DSP3_DM_3 0x8003
+#define WM5100_DSP3_DM_508 0x81FC
+#define WM5100_DSP3_DM_509 0x81FD
+#define WM5100_DSP3_DM_510 0x81FE
+#define WM5100_DSP3_DM_511 0x81FF
+#define WM5100_DSP3_PM_0 0x8800
+#define WM5100_DSP3_PM_1 0x8801
+#define WM5100_DSP3_PM_2 0x8802
+#define WM5100_DSP3_PM_3 0x8803
+#define WM5100_DSP3_PM_4 0x8804
+#define WM5100_DSP3_PM_5 0x8805
+#define WM5100_DSP3_PM_1530 0x8DFA
+#define WM5100_DSP3_PM_1531 0x8DFB
+#define WM5100_DSP3_PM_1532 0x8DFC
+#define WM5100_DSP3_PM_1533 0x8DFD
+#define WM5100_DSP3_PM_1534 0x8DFE
+#define WM5100_DSP3_PM_1535 0x8DFF
+#define WM5100_DSP3_ZM_0 0x9000
+#define WM5100_DSP3_ZM_1 0x9001
+#define WM5100_DSP3_ZM_2 0x9002
+#define WM5100_DSP3_ZM_3 0x9003
+#define WM5100_DSP3_ZM_2044 0x97FC
+#define WM5100_DSP3_ZM_2045 0x97FD
+#define WM5100_DSP3_ZM_2046 0x97FE
+#define WM5100_DSP3_ZM_2047 0x97FF
+
+#define WM5100_REGISTER_COUNT 1435
+#define WM5100_MAX_REGISTER 0x97FF
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - software reset
+ */
+#define WM5100_SW_RST_DEV_ID1_MASK 0xFFFF /* SW_RST_DEV_ID1 - [15:0] */
+#define WM5100_SW_RST_DEV_ID1_SHIFT 0 /* SW_RST_DEV_ID1 - [15:0] */
+#define WM5100_SW_RST_DEV_ID1_WIDTH 16 /* SW_RST_DEV_ID1 - [15:0] */
+
+/*
+ * R1 (0x01) - Device Revision
+ */
+#define WM5100_DEVICE_REVISION_MASK 0x000F /* DEVICE_REVISION - [3:0] */
+#define WM5100_DEVICE_REVISION_SHIFT 0 /* DEVICE_REVISION - [3:0] */
+#define WM5100_DEVICE_REVISION_WIDTH 4 /* DEVICE_REVISION - [3:0] */
+
+/*
+ * R16 (0x10) - Ctrl IF 1
+ */
+#define WM5100_AUTO_INC 0x0001 /* AUTO_INC */
+#define WM5100_AUTO_INC_MASK 0x0001 /* AUTO_INC */
+#define WM5100_AUTO_INC_SHIFT 0 /* AUTO_INC */
+#define WM5100_AUTO_INC_WIDTH 1 /* AUTO_INC */
+
+/*
+ * R32 (0x20) - Tone Generator 1
+ */
+#define WM5100_TONE_RATE_MASK 0x3000 /* TONE_RATE - [13:12] */
+#define WM5100_TONE_RATE_SHIFT 12 /* TONE_RATE - [13:12] */
+#define WM5100_TONE_RATE_WIDTH 2 /* TONE_RATE - [13:12] */
+#define WM5100_TONE_OFFSET_MASK 0x0300 /* TONE_OFFSET - [9:8] */
+#define WM5100_TONE_OFFSET_SHIFT 8 /* TONE_OFFSET - [9:8] */
+#define WM5100_TONE_OFFSET_WIDTH 2 /* TONE_OFFSET - [9:8] */
+#define WM5100_TONE2_ENA 0x0002 /* TONE2_ENA */
+#define WM5100_TONE2_ENA_MASK 0x0002 /* TONE2_ENA */
+#define WM5100_TONE2_ENA_SHIFT 1 /* TONE2_ENA */
+#define WM5100_TONE2_ENA_WIDTH 1 /* TONE2_ENA */
+#define WM5100_TONE1_ENA 0x0001 /* TONE1_ENA */
+#define WM5100_TONE1_ENA_MASK 0x0001 /* TONE1_ENA */
+#define WM5100_TONE1_ENA_SHIFT 0 /* TONE1_ENA */
+#define WM5100_TONE1_ENA_WIDTH 1 /* TONE1_ENA */
+
+/*
+ * R48 (0x30) - PWM Drive 1
+ */
+#define WM5100_PWM_RATE_MASK 0x3000 /* PWM_RATE - [13:12] */
+#define WM5100_PWM_RATE_SHIFT 12 /* PWM_RATE - [13:12] */
+#define WM5100_PWM_RATE_WIDTH 2 /* PWM_RATE - [13:12] */
+#define WM5100_PWM_CLK_SEL_MASK 0x0300 /* PWM_CLK_SEL - [9:8] */
+#define WM5100_PWM_CLK_SEL_SHIFT 8 /* PWM_CLK_SEL - [9:8] */
+#define WM5100_PWM_CLK_SEL_WIDTH 2 /* PWM_CLK_SEL - [9:8] */
+#define WM5100_PWM2_OVD 0x0020 /* PWM2_OVD */
+#define WM5100_PWM2_OVD_MASK 0x0020 /* PWM2_OVD */
+#define WM5100_PWM2_OVD_SHIFT 5 /* PWM2_OVD */
+#define WM5100_PWM2_OVD_WIDTH 1 /* PWM2_OVD */
+#define WM5100_PWM1_OVD 0x0010 /* PWM1_OVD */
+#define WM5100_PWM1_OVD_MASK 0x0010 /* PWM1_OVD */
+#define WM5100_PWM1_OVD_SHIFT 4 /* PWM1_OVD */
+#define WM5100_PWM1_OVD_WIDTH 1 /* PWM1_OVD */
+#define WM5100_PWM2_ENA 0x0002 /* PWM2_ENA */
+#define WM5100_PWM2_ENA_MASK 0x0002 /* PWM2_ENA */
+#define WM5100_PWM2_ENA_SHIFT 1 /* PWM2_ENA */
+#define WM5100_PWM2_ENA_WIDTH 1 /* PWM2_ENA */
+#define WM5100_PWM1_ENA 0x0001 /* PWM1_ENA */
+#define WM5100_PWM1_ENA_MASK 0x0001 /* PWM1_ENA */
+#define WM5100_PWM1_ENA_SHIFT 0 /* PWM1_ENA */
+#define WM5100_PWM1_ENA_WIDTH 1 /* PWM1_ENA */
+
+/*
+ * R49 (0x31) - PWM Drive 2
+ */
+#define WM5100_PWM1_LVL_MASK 0x03FF /* PWM1_LVL - [9:0] */
+#define WM5100_PWM1_LVL_SHIFT 0 /* PWM1_LVL - [9:0] */
+#define WM5100_PWM1_LVL_WIDTH 10 /* PWM1_LVL - [9:0] */
+
+/*
+ * R50 (0x32) - PWM Drive 3
+ */
+#define WM5100_PWM2_LVL_MASK 0x03FF /* PWM2_LVL - [9:0] */
+#define WM5100_PWM2_LVL_SHIFT 0 /* PWM2_LVL - [9:0] */
+#define WM5100_PWM2_LVL_WIDTH 10 /* PWM2_LVL - [9:0] */
+
+/*
+ * R256 (0x100) - Clocking 1
+ */
+#define WM5100_CLK_32K_SRC_MASK 0x000F /* CLK_32K_SRC - [3:0] */
+#define WM5100_CLK_32K_SRC_SHIFT 0 /* CLK_32K_SRC - [3:0] */
+#define WM5100_CLK_32K_SRC_WIDTH 4 /* CLK_32K_SRC - [3:0] */
+
+/*
+ * R257 (0x101) - Clocking 3
+ */
+#define WM5100_SYSCLK_FREQ_MASK 0x0700 /* SYSCLK_FREQ - [10:8] */
+#define WM5100_SYSCLK_FREQ_SHIFT 8 /* SYSCLK_FREQ - [10:8] */
+#define WM5100_SYSCLK_FREQ_WIDTH 3 /* SYSCLK_FREQ - [10:8] */
+#define WM5100_SYSCLK_ENA 0x0040 /* SYSCLK_ENA */
+#define WM5100_SYSCLK_ENA_MASK 0x0040 /* SYSCLK_ENA */
+#define WM5100_SYSCLK_ENA_SHIFT 6 /* SYSCLK_ENA */
+#define WM5100_SYSCLK_ENA_WIDTH 1 /* SYSCLK_ENA */
+#define WM5100_SYSCLK_SRC_MASK 0x000F /* SYSCLK_SRC - [3:0] */
+#define WM5100_SYSCLK_SRC_SHIFT 0 /* SYSCLK_SRC - [3:0] */
+#define WM5100_SYSCLK_SRC_WIDTH 4 /* SYSCLK_SRC - [3:0] */
+
+/*
+ * R258 (0x102) - Clocking 4
+ */
+#define WM5100_SAMPLE_RATE_1_MASK 0x001F /* SAMPLE_RATE_1 - [4:0] */
+#define WM5100_SAMPLE_RATE_1_SHIFT 0 /* SAMPLE_RATE_1 - [4:0] */
+#define WM5100_SAMPLE_RATE_1_WIDTH 5 /* SAMPLE_RATE_1 - [4:0] */
+
+/*
+ * R259 (0x103) - Clocking 5
+ */
+#define WM5100_SAMPLE_RATE_2_MASK 0x001F /* SAMPLE_RATE_2 - [4:0] */
+#define WM5100_SAMPLE_RATE_2_SHIFT 0 /* SAMPLE_RATE_2 - [4:0] */
+#define WM5100_SAMPLE_RATE_2_WIDTH 5 /* SAMPLE_RATE_2 - [4:0] */
+
+/*
+ * R260 (0x104) - Clocking 6
+ */
+#define WM5100_SAMPLE_RATE_3_MASK 0x001F /* SAMPLE_RATE_3 - [4:0] */
+#define WM5100_SAMPLE_RATE_3_SHIFT 0 /* SAMPLE_RATE_3 - [4:0] */
+#define WM5100_SAMPLE_RATE_3_WIDTH 5 /* SAMPLE_RATE_3 - [4:0] */
+
+/*
+ * R263 (0x107) - Clocking 7
+ */
+#define WM5100_ASYNC_CLK_FREQ_MASK 0x0700 /* ASYNC_CLK_FREQ - [10:8] */
+#define WM5100_ASYNC_CLK_FREQ_SHIFT 8 /* ASYNC_CLK_FREQ - [10:8] */
+#define WM5100_ASYNC_CLK_FREQ_WIDTH 3 /* ASYNC_CLK_FREQ - [10:8] */
+#define WM5100_ASYNC_CLK_ENA 0x0040 /* ASYNC_CLK_ENA */
+#define WM5100_ASYNC_CLK_ENA_MASK 0x0040 /* ASYNC_CLK_ENA */
+#define WM5100_ASYNC_CLK_ENA_SHIFT 6 /* ASYNC_CLK_ENA */
+#define WM5100_ASYNC_CLK_ENA_WIDTH 1 /* ASYNC_CLK_ENA */
+#define WM5100_ASYNC_CLK_SRC_MASK 0x000F /* ASYNC_CLK_SRC - [3:0] */
+#define WM5100_ASYNC_CLK_SRC_SHIFT 0 /* ASYNC_CLK_SRC - [3:0] */
+#define WM5100_ASYNC_CLK_SRC_WIDTH 4 /* ASYNC_CLK_SRC - [3:0] */
+
+/*
+ * R264 (0x108) - Clocking 8
+ */
+#define WM5100_ASYNC_SAMPLE_RATE_MASK 0x001F /* ASYNC_SAMPLE_RATE - [4:0] */
+#define WM5100_ASYNC_SAMPLE_RATE_SHIFT 0 /* ASYNC_SAMPLE_RATE - [4:0] */
+#define WM5100_ASYNC_SAMPLE_RATE_WIDTH 5 /* ASYNC_SAMPLE_RATE - [4:0] */
+
+/*
+ * R288 (0x120) - ASRC_ENABLE
+ */
+#define WM5100_ASRC2L_ENA 0x0008 /* ASRC2L_ENA */
+#define WM5100_ASRC2L_ENA_MASK 0x0008 /* ASRC2L_ENA */
+#define WM5100_ASRC2L_ENA_SHIFT 3 /* ASRC2L_ENA */
+#define WM5100_ASRC2L_ENA_WIDTH 1 /* ASRC2L_ENA */
+#define WM5100_ASRC2R_ENA 0x0004 /* ASRC2R_ENA */
+#define WM5100_ASRC2R_ENA_MASK 0x0004 /* ASRC2R_ENA */
+#define WM5100_ASRC2R_ENA_SHIFT 2 /* ASRC2R_ENA */
+#define WM5100_ASRC2R_ENA_WIDTH 1 /* ASRC2R_ENA */
+#define WM5100_ASRC1L_ENA 0x0002 /* ASRC1L_ENA */
+#define WM5100_ASRC1L_ENA_MASK 0x0002 /* ASRC1L_ENA */
+#define WM5100_ASRC1L_ENA_SHIFT 1 /* ASRC1L_ENA */
+#define WM5100_ASRC1L_ENA_WIDTH 1 /* ASRC1L_ENA */
+#define WM5100_ASRC1R_ENA 0x0001 /* ASRC1R_ENA */
+#define WM5100_ASRC1R_ENA_MASK 0x0001 /* ASRC1R_ENA */
+#define WM5100_ASRC1R_ENA_SHIFT 0 /* ASRC1R_ENA */
+#define WM5100_ASRC1R_ENA_WIDTH 1 /* ASRC1R_ENA */
+
+/*
+ * R289 (0x121) - ASRC_STATUS
+ */
+#define WM5100_ASRC2L_ENA_STS 0x0008 /* ASRC2L_ENA_STS */
+#define WM5100_ASRC2L_ENA_STS_MASK 0x0008 /* ASRC2L_ENA_STS */
+#define WM5100_ASRC2L_ENA_STS_SHIFT 3 /* ASRC2L_ENA_STS */
+#define WM5100_ASRC2L_ENA_STS_WIDTH 1 /* ASRC2L_ENA_STS */
+#define WM5100_ASRC2R_ENA_STS 0x0004 /* ASRC2R_ENA_STS */
+#define WM5100_ASRC2R_ENA_STS_MASK 0x0004 /* ASRC2R_ENA_STS */
+#define WM5100_ASRC2R_ENA_STS_SHIFT 2 /* ASRC2R_ENA_STS */
+#define WM5100_ASRC2R_ENA_STS_WIDTH 1 /* ASRC2R_ENA_STS */
+#define WM5100_ASRC1L_ENA_STS 0x0002 /* ASRC1L_ENA_STS */
+#define WM5100_ASRC1L_ENA_STS_MASK 0x0002 /* ASRC1L_ENA_STS */
+#define WM5100_ASRC1L_ENA_STS_SHIFT 1 /* ASRC1L_ENA_STS */
+#define WM5100_ASRC1L_ENA_STS_WIDTH 1 /* ASRC1L_ENA_STS */
+#define WM5100_ASRC1R_ENA_STS 0x0001 /* ASRC1R_ENA_STS */
+#define WM5100_ASRC1R_ENA_STS_MASK 0x0001 /* ASRC1R_ENA_STS */
+#define WM5100_ASRC1R_ENA_STS_SHIFT 0 /* ASRC1R_ENA_STS */
+#define WM5100_ASRC1R_ENA_STS_WIDTH 1 /* ASRC1R_ENA_STS */
+
+/*
+ * R290 (0x122) - ASRC_RATE1
+ */
+#define WM5100_ASRC_RATE1_MASK 0x0006 /* ASRC_RATE1 - [2:1] */
+#define WM5100_ASRC_RATE1_SHIFT 1 /* ASRC_RATE1 - [2:1] */
+#define WM5100_ASRC_RATE1_WIDTH 2 /* ASRC_RATE1 - [2:1] */
+
+/*
+ * R321 (0x141) - ISRC 1 CTRL 1
+ */
+#define WM5100_ISRC1_DFS_ENA 0x2000 /* ISRC1_DFS_ENA */
+#define WM5100_ISRC1_DFS_ENA_MASK 0x2000 /* ISRC1_DFS_ENA */
+#define WM5100_ISRC1_DFS_ENA_SHIFT 13 /* ISRC1_DFS_ENA */
+#define WM5100_ISRC1_DFS_ENA_WIDTH 1 /* ISRC1_DFS_ENA */
+#define WM5100_ISRC1_CLK_SEL_MASK 0x0300 /* ISRC1_CLK_SEL - [9:8] */
+#define WM5100_ISRC1_CLK_SEL_SHIFT 8 /* ISRC1_CLK_SEL - [9:8] */
+#define WM5100_ISRC1_CLK_SEL_WIDTH 2 /* ISRC1_CLK_SEL - [9:8] */
+#define WM5100_ISRC1_FSH_MASK 0x000C /* ISRC1_FSH - [3:2] */
+#define WM5100_ISRC1_FSH_SHIFT 2 /* ISRC1_FSH - [3:2] */
+#define WM5100_ISRC1_FSH_WIDTH 2 /* ISRC1_FSH - [3:2] */
+#define WM5100_ISRC1_FSL_MASK 0x0003 /* ISRC1_FSL - [1:0] */
+#define WM5100_ISRC1_FSL_SHIFT 0 /* ISRC1_FSL - [1:0] */
+#define WM5100_ISRC1_FSL_WIDTH 2 /* ISRC1_FSL - [1:0] */
+
+/*
+ * R322 (0x142) - ISRC 1 CTRL 2
+ */
+#define WM5100_ISRC1_INT1_ENA 0x8000 /* ISRC1_INT1_ENA */
+#define WM5100_ISRC1_INT1_ENA_MASK 0x8000 /* ISRC1_INT1_ENA */
+#define WM5100_ISRC1_INT1_ENA_SHIFT 15 /* ISRC1_INT1_ENA */
+#define WM5100_ISRC1_INT1_ENA_WIDTH 1 /* ISRC1_INT1_ENA */
+#define WM5100_ISRC1_INT2_ENA 0x4000 /* ISRC1_INT2_ENA */
+#define WM5100_ISRC1_INT2_ENA_MASK 0x4000 /* ISRC1_INT2_ENA */
+#define WM5100_ISRC1_INT2_ENA_SHIFT 14 /* ISRC1_INT2_ENA */
+#define WM5100_ISRC1_INT2_ENA_WIDTH 1 /* ISRC1_INT2_ENA */
+#define WM5100_ISRC1_INT3_ENA 0x2000 /* ISRC1_INT3_ENA */
+#define WM5100_ISRC1_INT3_ENA_MASK 0x2000 /* ISRC1_INT3_ENA */
+#define WM5100_ISRC1_INT3_ENA_SHIFT 13 /* ISRC1_INT3_ENA */
+#define WM5100_ISRC1_INT3_ENA_WIDTH 1 /* ISRC1_INT3_ENA */
+#define WM5100_ISRC1_INT4_ENA 0x1000 /* ISRC1_INT4_ENA */
+#define WM5100_ISRC1_INT4_ENA_MASK 0x1000 /* ISRC1_INT4_ENA */
+#define WM5100_ISRC1_INT4_ENA_SHIFT 12 /* ISRC1_INT4_ENA */
+#define WM5100_ISRC1_INT4_ENA_WIDTH 1 /* ISRC1_INT4_ENA */
+#define WM5100_ISRC1_DEC1_ENA 0x0200 /* ISRC1_DEC1_ENA */
+#define WM5100_ISRC1_DEC1_ENA_MASK 0x0200 /* ISRC1_DEC1_ENA */
+#define WM5100_ISRC1_DEC1_ENA_SHIFT 9 /* ISRC1_DEC1_ENA */
+#define WM5100_ISRC1_DEC1_ENA_WIDTH 1 /* ISRC1_DEC1_ENA */
+#define WM5100_ISRC1_DEC2_ENA 0x0100 /* ISRC1_DEC2_ENA */
+#define WM5100_ISRC1_DEC2_ENA_MASK 0x0100 /* ISRC1_DEC2_ENA */
+#define WM5100_ISRC1_DEC2_ENA_SHIFT 8 /* ISRC1_DEC2_ENA */
+#define WM5100_ISRC1_DEC2_ENA_WIDTH 1 /* ISRC1_DEC2_ENA */
+#define WM5100_ISRC1_DEC3_ENA 0x0080 /* ISRC1_DEC3_ENA */
+#define WM5100_ISRC1_DEC3_ENA_MASK 0x0080 /* ISRC1_DEC3_ENA */
+#define WM5100_ISRC1_DEC3_ENA_SHIFT 7 /* ISRC1_DEC3_ENA */
+#define WM5100_ISRC1_DEC3_ENA_WIDTH 1 /* ISRC1_DEC3_ENA */
+#define WM5100_ISRC1_DEC4_ENA 0x0040 /* ISRC1_DEC4_ENA */
+#define WM5100_ISRC1_DEC4_ENA_MASK 0x0040 /* ISRC1_DEC4_ENA */
+#define WM5100_ISRC1_DEC4_ENA_SHIFT 6 /* ISRC1_DEC4_ENA */
+#define WM5100_ISRC1_DEC4_ENA_WIDTH 1 /* ISRC1_DEC4_ENA */
+#define WM5100_ISRC1_NOTCH_ENA 0x0001 /* ISRC1_NOTCH_ENA */
+#define WM5100_ISRC1_NOTCH_ENA_MASK 0x0001 /* ISRC1_NOTCH_ENA */
+#define WM5100_ISRC1_NOTCH_ENA_SHIFT 0 /* ISRC1_NOTCH_ENA */
+#define WM5100_ISRC1_NOTCH_ENA_WIDTH 1 /* ISRC1_NOTCH_ENA */
+
+/*
+ * R323 (0x143) - ISRC 2 CTRL1
+ */
+#define WM5100_ISRC2_DFS_ENA 0x2000 /* ISRC2_DFS_ENA */
+#define WM5100_ISRC2_DFS_ENA_MASK 0x2000 /* ISRC2_DFS_ENA */
+#define WM5100_ISRC2_DFS_ENA_SHIFT 13 /* ISRC2_DFS_ENA */
+#define WM5100_ISRC2_DFS_ENA_WIDTH 1 /* ISRC2_DFS_ENA */
+#define WM5100_ISRC2_CLK_SEL_MASK 0x0300 /* ISRC2_CLK_SEL - [9:8] */
+#define WM5100_ISRC2_CLK_SEL_SHIFT 8 /* ISRC2_CLK_SEL - [9:8] */
+#define WM5100_ISRC2_CLK_SEL_WIDTH 2 /* ISRC2_CLK_SEL - [9:8] */
+#define WM5100_ISRC2_FSH_MASK 0x000C /* ISRC2_FSH - [3:2] */
+#define WM5100_ISRC2_FSH_SHIFT 2 /* ISRC2_FSH - [3:2] */
+#define WM5100_ISRC2_FSH_WIDTH 2 /* ISRC2_FSH - [3:2] */
+#define WM5100_ISRC2_FSL_MASK 0x0003 /* ISRC2_FSL - [1:0] */
+#define WM5100_ISRC2_FSL_SHIFT 0 /* ISRC2_FSL - [1:0] */
+#define WM5100_ISRC2_FSL_WIDTH 2 /* ISRC2_FSL - [1:0] */
+
+/*
+ * R324 (0x144) - ISRC 2 CTRL 2
+ */
+#define WM5100_ISRC2_INT1_ENA 0x8000 /* ISRC2_INT1_ENA */
+#define WM5100_ISRC2_INT1_ENA_MASK 0x8000 /* ISRC2_INT1_ENA */
+#define WM5100_ISRC2_INT1_ENA_SHIFT 15 /* ISRC2_INT1_ENA */
+#define WM5100_ISRC2_INT1_ENA_WIDTH 1 /* ISRC2_INT1_ENA */
+#define WM5100_ISRC2_INT2_ENA 0x4000 /* ISRC2_INT2_ENA */
+#define WM5100_ISRC2_INT2_ENA_MASK 0x4000 /* ISRC2_INT2_ENA */
+#define WM5100_ISRC2_INT2_ENA_SHIFT 14 /* ISRC2_INT2_ENA */
+#define WM5100_ISRC2_INT2_ENA_WIDTH 1 /* ISRC2_INT2_ENA */
+#define WM5100_ISRC2_INT3_ENA 0x2000 /* ISRC2_INT3_ENA */
+#define WM5100_ISRC2_INT3_ENA_MASK 0x2000 /* ISRC2_INT3_ENA */
+#define WM5100_ISRC2_INT3_ENA_SHIFT 13 /* ISRC2_INT3_ENA */
+#define WM5100_ISRC2_INT3_ENA_WIDTH 1 /* ISRC2_INT3_ENA */
+#define WM5100_ISRC2_INT4_ENA 0x1000 /* ISRC2_INT4_ENA */
+#define WM5100_ISRC2_INT4_ENA_MASK 0x1000 /* ISRC2_INT4_ENA */
+#define WM5100_ISRC2_INT4_ENA_SHIFT 12 /* ISRC2_INT4_ENA */
+#define WM5100_ISRC2_INT4_ENA_WIDTH 1 /* ISRC2_INT4_ENA */
+#define WM5100_ISRC2_DEC1_ENA 0x0200 /* ISRC2_DEC1_ENA */
+#define WM5100_ISRC2_DEC1_ENA_MASK 0x0200 /* ISRC2_DEC1_ENA */
+#define WM5100_ISRC2_DEC1_ENA_SHIFT 9 /* ISRC2_DEC1_ENA */
+#define WM5100_ISRC2_DEC1_ENA_WIDTH 1 /* ISRC2_DEC1_ENA */
+#define WM5100_ISRC2_DEC2_ENA 0x0100 /* ISRC2_DEC2_ENA */
+#define WM5100_ISRC2_DEC2_ENA_MASK 0x0100 /* ISRC2_DEC2_ENA */
+#define WM5100_ISRC2_DEC2_ENA_SHIFT 8 /* ISRC2_DEC2_ENA */
+#define WM5100_ISRC2_DEC2_ENA_WIDTH 1 /* ISRC2_DEC2_ENA */
+#define WM5100_ISRC2_DEC3_ENA 0x0080 /* ISRC2_DEC3_ENA */
+#define WM5100_ISRC2_DEC3_ENA_MASK 0x0080 /* ISRC2_DEC3_ENA */
+#define WM5100_ISRC2_DEC3_ENA_SHIFT 7 /* ISRC2_DEC3_ENA */
+#define WM5100_ISRC2_DEC3_ENA_WIDTH 1 /* ISRC2_DEC3_ENA */
+#define WM5100_ISRC2_DEC4_ENA 0x0040 /* ISRC2_DEC4_ENA */
+#define WM5100_ISRC2_DEC4_ENA_MASK 0x0040 /* ISRC2_DEC4_ENA */
+#define WM5100_ISRC2_DEC4_ENA_SHIFT 6 /* ISRC2_DEC4_ENA */
+#define WM5100_ISRC2_DEC4_ENA_WIDTH 1 /* ISRC2_DEC4_ENA */
+#define WM5100_ISRC2_NOTCH_ENA 0x0001 /* ISRC2_NOTCH_ENA */
+#define WM5100_ISRC2_NOTCH_ENA_MASK 0x0001 /* ISRC2_NOTCH_ENA */
+#define WM5100_ISRC2_NOTCH_ENA_SHIFT 0 /* ISRC2_NOTCH_ENA */
+#define WM5100_ISRC2_NOTCH_ENA_WIDTH 1 /* ISRC2_NOTCH_ENA */
+
+/*
+ * R386 (0x182) - FLL1 Control 1
+ */
+#define WM5100_FLL1_ENA 0x0001 /* FLL1_ENA */
+#define WM5100_FLL1_ENA_MASK 0x0001 /* FLL1_ENA */
+#define WM5100_FLL1_ENA_SHIFT 0 /* FLL1_ENA */
+#define WM5100_FLL1_ENA_WIDTH 1 /* FLL1_ENA */
+
+/*
+ * R387 (0x183) - FLL1 Control 2
+ */
+#define WM5100_FLL1_OUTDIV_MASK 0x3F00 /* FLL1_OUTDIV - [13:8] */
+#define WM5100_FLL1_OUTDIV_SHIFT 8 /* FLL1_OUTDIV - [13:8] */
+#define WM5100_FLL1_OUTDIV_WIDTH 6 /* FLL1_OUTDIV - [13:8] */
+#define WM5100_FLL1_FRATIO_MASK 0x0007 /* FLL1_FRATIO - [2:0] */
+#define WM5100_FLL1_FRATIO_SHIFT 0 /* FLL1_FRATIO - [2:0] */
+#define WM5100_FLL1_FRATIO_WIDTH 3 /* FLL1_FRATIO - [2:0] */
+
+/*
+ * R388 (0x184) - FLL1 Control 3
+ */
+#define WM5100_FLL1_THETA_MASK 0xFFFF /* FLL1_THETA - [15:0] */
+#define WM5100_FLL1_THETA_SHIFT 0 /* FLL1_THETA - [15:0] */
+#define WM5100_FLL1_THETA_WIDTH 16 /* FLL1_THETA - [15:0] */
+
+/*
+ * R390 (0x186) - FLL1 Control 5
+ */
+#define WM5100_FLL1_N_MASK 0x03FF /* FLL1_N - [9:0] */
+#define WM5100_FLL1_N_SHIFT 0 /* FLL1_N - [9:0] */
+#define WM5100_FLL1_N_WIDTH 10 /* FLL1_N - [9:0] */
+
+/*
+ * R391 (0x187) - FLL1 Control 6
+ */
+#define WM5100_FLL1_REFCLK_DIV_MASK 0x00C0 /* FLL1_REFCLK_DIV - [7:6] */
+#define WM5100_FLL1_REFCLK_DIV_SHIFT 6 /* FLL1_REFCLK_DIV - [7:6] */
+#define WM5100_FLL1_REFCLK_DIV_WIDTH 2 /* FLL1_REFCLK_DIV - [7:6] */
+#define WM5100_FLL1_REFCLK_SRC_MASK 0x000F /* FLL1_REFCLK_SRC - [3:0] */
+#define WM5100_FLL1_REFCLK_SRC_SHIFT 0 /* FLL1_REFCLK_SRC - [3:0] */
+#define WM5100_FLL1_REFCLK_SRC_WIDTH 4 /* FLL1_REFCLK_SRC - [3:0] */
+
+/*
+ * R392 (0x188) - FLL1 EFS 1
+ */
+#define WM5100_FLL1_LAMBDA_MASK 0xFFFF /* FLL1_LAMBDA - [15:0] */
+#define WM5100_FLL1_LAMBDA_SHIFT 0 /* FLL1_LAMBDA - [15:0] */
+#define WM5100_FLL1_LAMBDA_WIDTH 16 /* FLL1_LAMBDA - [15:0] */
+
+/*
+ * R418 (0x1A2) - FLL2 Control 1
+ */
+#define WM5100_FLL2_ENA 0x0001 /* FLL2_ENA */
+#define WM5100_FLL2_ENA_MASK 0x0001 /* FLL2_ENA */
+#define WM5100_FLL2_ENA_SHIFT 0 /* FLL2_ENA */
+#define WM5100_FLL2_ENA_WIDTH 1 /* FLL2_ENA */
+
+/*
+ * R419 (0x1A3) - FLL2 Control 2
+ */
+#define WM5100_FLL2_OUTDIV_MASK 0x3F00 /* FLL2_OUTDIV - [13:8] */
+#define WM5100_FLL2_OUTDIV_SHIFT 8 /* FLL2_OUTDIV - [13:8] */
+#define WM5100_FLL2_OUTDIV_WIDTH 6 /* FLL2_OUTDIV - [13:8] */
+#define WM5100_FLL2_FRATIO_MASK 0x0007 /* FLL2_FRATIO - [2:0] */
+#define WM5100_FLL2_FRATIO_SHIFT 0 /* FLL2_FRATIO - [2:0] */
+#define WM5100_FLL2_FRATIO_WIDTH 3 /* FLL2_FRATIO - [2:0] */
+
+/*
+ * R420 (0x1A4) - FLL2 Control 3
+ */
+#define WM5100_FLL2_THETA_MASK 0xFFFF /* FLL2_THETA - [15:0] */
+#define WM5100_FLL2_THETA_SHIFT 0 /* FLL2_THETA - [15:0] */
+#define WM5100_FLL2_THETA_WIDTH 16 /* FLL2_THETA - [15:0] */
+
+/*
+ * R422 (0x1A6) - FLL2 Control 5
+ */
+#define WM5100_FLL2_N_MASK 0x03FF /* FLL2_N - [9:0] */
+#define WM5100_FLL2_N_SHIFT 0 /* FLL2_N - [9:0] */
+#define WM5100_FLL2_N_WIDTH 10 /* FLL2_N - [9:0] */
+
+/*
+ * R423 (0x1A7) - FLL2 Control 6
+ */
+#define WM5100_FLL2_REFCLK_DIV_MASK 0x00C0 /* FLL2_REFCLK_DIV - [7:6] */
+#define WM5100_FLL2_REFCLK_DIV_SHIFT 6 /* FLL2_REFCLK_DIV - [7:6] */
+#define WM5100_FLL2_REFCLK_DIV_WIDTH 2 /* FLL2_REFCLK_DIV - [7:6] */
+#define WM5100_FLL2_REFCLK_SRC_MASK 0x000F /* FLL2_REFCLK_SRC - [3:0] */
+#define WM5100_FLL2_REFCLK_SRC_SHIFT 0 /* FLL2_REFCLK_SRC - [3:0] */
+#define WM5100_FLL2_REFCLK_SRC_WIDTH 4 /* FLL2_REFCLK_SRC - [3:0] */
+
+/*
+ * R424 (0x1A8) - FLL2 EFS 1
+ */
+#define WM5100_FLL2_LAMBDA_MASK 0xFFFF /* FLL2_LAMBDA - [15:0] */
+#define WM5100_FLL2_LAMBDA_SHIFT 0 /* FLL2_LAMBDA - [15:0] */
+#define WM5100_FLL2_LAMBDA_WIDTH 16 /* FLL2_LAMBDA - [15:0] */
+
+/*
+ * R512 (0x200) - Mic Charge Pump 1
+ */
+#define WM5100_CP2_BYPASS 0x0020 /* CP2_BYPASS */
+#define WM5100_CP2_BYPASS_MASK 0x0020 /* CP2_BYPASS */
+#define WM5100_CP2_BYPASS_SHIFT 5 /* CP2_BYPASS */
+#define WM5100_CP2_BYPASS_WIDTH 1 /* CP2_BYPASS */
+#define WM5100_CP2_ENA 0x0001 /* CP2_ENA */
+#define WM5100_CP2_ENA_MASK 0x0001 /* CP2_ENA */
+#define WM5100_CP2_ENA_SHIFT 0 /* CP2_ENA */
+#define WM5100_CP2_ENA_WIDTH 1 /* CP2_ENA */
+
+/*
+ * R513 (0x201) - Mic Charge Pump 2
+ */
+#define WM5100_LDO2_VSEL_MASK 0xF800 /* LDO2_VSEL - [15:11] */
+#define WM5100_LDO2_VSEL_SHIFT 11 /* LDO2_VSEL - [15:11] */
+#define WM5100_LDO2_VSEL_WIDTH 5 /* LDO2_VSEL - [15:11] */
+
+/*
+ * R514 (0x202) - HP Charge Pump 1
+ */
+#define WM5100_CP1_ENA 0x0001 /* CP1_ENA */
+#define WM5100_CP1_ENA_MASK 0x0001 /* CP1_ENA */
+#define WM5100_CP1_ENA_SHIFT 0 /* CP1_ENA */
+#define WM5100_CP1_ENA_WIDTH 1 /* CP1_ENA */
+
+/*
+ * R529 (0x211) - LDO1 Control
+ */
+#define WM5100_LDO1_BYPASS 0x0002 /* LDO1_BYPASS */
+#define WM5100_LDO1_BYPASS_MASK 0x0002 /* LDO1_BYPASS */
+#define WM5100_LDO1_BYPASS_SHIFT 1 /* LDO1_BYPASS */
+#define WM5100_LDO1_BYPASS_WIDTH 1 /* LDO1_BYPASS */
+
+/*
+ * R533 (0x215) - Mic Bias Ctrl 1
+ */
+#define WM5100_MICB1_DISCH 0x0040 /* MICB1_DISCH */
+#define WM5100_MICB1_DISCH_MASK 0x0040 /* MICB1_DISCH */
+#define WM5100_MICB1_DISCH_SHIFT 6 /* MICB1_DISCH */
+#define WM5100_MICB1_DISCH_WIDTH 1 /* MICB1_DISCH */
+#define WM5100_MICB1_RATE 0x0020 /* MICB1_RATE */
+#define WM5100_MICB1_RATE_MASK 0x0020 /* MICB1_RATE */
+#define WM5100_MICB1_RATE_SHIFT 5 /* MICB1_RATE */
+#define WM5100_MICB1_RATE_WIDTH 1 /* MICB1_RATE */
+#define WM5100_MICB1_LVL_MASK 0x001C /* MICB1_LVL - [4:2] */
+#define WM5100_MICB1_LVL_SHIFT 2 /* MICB1_LVL - [4:2] */
+#define WM5100_MICB1_LVL_WIDTH 3 /* MICB1_LVL - [4:2] */
+#define WM5100_MICB1_BYPASS 0x0002 /* MICB1_BYPASS */
+#define WM5100_MICB1_BYPASS_MASK 0x0002 /* MICB1_BYPASS */
+#define WM5100_MICB1_BYPASS_SHIFT 1 /* MICB1_BYPASS */
+#define WM5100_MICB1_BYPASS_WIDTH 1 /* MICB1_BYPASS */
+#define WM5100_MICB1_ENA 0x0001 /* MICB1_ENA */
+#define WM5100_MICB1_ENA_MASK 0x0001 /* MICB1_ENA */
+#define WM5100_MICB1_ENA_SHIFT 0 /* MICB1_ENA */
+#define WM5100_MICB1_ENA_WIDTH 1 /* MICB1_ENA */
+
+/*
+ * R534 (0x216) - Mic Bias Ctrl 2
+ */
+#define WM5100_MICB2_DISCH 0x0040 /* MICB2_DISCH */
+#define WM5100_MICB2_DISCH_MASK 0x0040 /* MICB2_DISCH */
+#define WM5100_MICB2_DISCH_SHIFT 6 /* MICB2_DISCH */
+#define WM5100_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */
+#define WM5100_MICB2_RATE 0x0020 /* MICB2_RATE */
+#define WM5100_MICB2_RATE_MASK 0x0020 /* MICB2_RATE */
+#define WM5100_MICB2_RATE_SHIFT 5 /* MICB2_RATE */
+#define WM5100_MICB2_RATE_WIDTH 1 /* MICB2_RATE */
+#define WM5100_MICB2_LVL_MASK 0x001C /* MICB2_LVL - [4:2] */
+#define WM5100_MICB2_LVL_SHIFT 2 /* MICB2_LVL - [4:2] */
+#define WM5100_MICB2_LVL_WIDTH 3 /* MICB2_LVL - [4:2] */
+#define WM5100_MICB2_BYPASS 0x0002 /* MICB2_BYPASS */
+#define WM5100_MICB2_BYPASS_MASK 0x0002 /* MICB2_BYPASS */
+#define WM5100_MICB2_BYPASS_SHIFT 1 /* MICB2_BYPASS */
+#define WM5100_MICB2_BYPASS_WIDTH 1 /* MICB2_BYPASS */
+#define WM5100_MICB2_ENA 0x0001 /* MICB2_ENA */
+#define WM5100_MICB2_ENA_MASK 0x0001 /* MICB2_ENA */
+#define WM5100_MICB2_ENA_SHIFT 0 /* MICB2_ENA */
+#define WM5100_MICB2_ENA_WIDTH 1 /* MICB2_ENA */
+
+/*
+ * R535 (0x217) - Mic Bias Ctrl 3
+ */
+#define WM5100_MICB3_DISCH 0x0040 /* MICB3_DISCH */
+#define WM5100_MICB3_DISCH_MASK 0x0040 /* MICB3_DISCH */
+#define WM5100_MICB3_DISCH_SHIFT 6 /* MICB3_DISCH */
+#define WM5100_MICB3_DISCH_WIDTH 1 /* MICB3_DISCH */
+#define WM5100_MICB3_RATE 0x0020 /* MICB3_RATE */
+#define WM5100_MICB3_RATE_MASK 0x0020 /* MICB3_RATE */
+#define WM5100_MICB3_RATE_SHIFT 5 /* MICB3_RATE */
+#define WM5100_MICB3_RATE_WIDTH 1 /* MICB3_RATE */
+#define WM5100_MICB3_LVL_MASK 0x001C /* MICB3_LVL - [4:2] */
+#define WM5100_MICB3_LVL_SHIFT 2 /* MICB3_LVL - [4:2] */
+#define WM5100_MICB3_LVL_WIDTH 3 /* MICB3_LVL - [4:2] */
+#define WM5100_MICB3_BYPASS 0x0002 /* MICB3_BYPASS */
+#define WM5100_MICB3_BYPASS_MASK 0x0002 /* MICB3_BYPASS */
+#define WM5100_MICB3_BYPASS_SHIFT 1 /* MICB3_BYPASS */
+#define WM5100_MICB3_BYPASS_WIDTH 1 /* MICB3_BYPASS */
+#define WM5100_MICB3_ENA 0x0001 /* MICB3_ENA */
+#define WM5100_MICB3_ENA_MASK 0x0001 /* MICB3_ENA */
+#define WM5100_MICB3_ENA_SHIFT 0 /* MICB3_ENA */
+#define WM5100_MICB3_ENA_WIDTH 1 /* MICB3_ENA */
+
+/*
+ * R640 (0x280) - Accessory Detect Mode 1
+ */
+#define WM5100_ACCDET_BIAS_SRC_MASK 0xC000 /* ACCDET_BIAS_SRC - [15:14] */
+#define WM5100_ACCDET_BIAS_SRC_SHIFT 14 /* ACCDET_BIAS_SRC - [15:14] */
+#define WM5100_ACCDET_BIAS_SRC_WIDTH 2 /* ACCDET_BIAS_SRC - [15:14] */
+#define WM5100_ACCDET_SRC 0x2000 /* ACCDET_SRC */
+#define WM5100_ACCDET_SRC_MASK 0x2000 /* ACCDET_SRC */
+#define WM5100_ACCDET_SRC_SHIFT 13 /* ACCDET_SRC */
+#define WM5100_ACCDET_SRC_WIDTH 1 /* ACCDET_SRC */
+#define WM5100_ACCDET_MODE_MASK 0x0003 /* ACCDET_MODE - [1:0] */
+#define WM5100_ACCDET_MODE_SHIFT 0 /* ACCDET_MODE - [1:0] */
+#define WM5100_ACCDET_MODE_WIDTH 2 /* ACCDET_MODE - [1:0] */
+
+/*
+ * R648 (0x288) - Headphone Detect 1
+ */
+#define WM5100_HP_HOLDTIME_MASK 0x00E0 /* HP_HOLDTIME - [7:5] */
+#define WM5100_HP_HOLDTIME_SHIFT 5 /* HP_HOLDTIME - [7:5] */
+#define WM5100_HP_HOLDTIME_WIDTH 3 /* HP_HOLDTIME - [7:5] */
+#define WM5100_HP_CLK_DIV_MASK 0x0018 /* HP_CLK_DIV - [4:3] */
+#define WM5100_HP_CLK_DIV_SHIFT 3 /* HP_CLK_DIV - [4:3] */
+#define WM5100_HP_CLK_DIV_WIDTH 2 /* HP_CLK_DIV - [4:3] */
+#define WM5100_HP_STEP_SIZE 0x0002 /* HP_STEP_SIZE */
+#define WM5100_HP_STEP_SIZE_MASK 0x0002 /* HP_STEP_SIZE */
+#define WM5100_HP_STEP_SIZE_SHIFT 1 /* HP_STEP_SIZE */
+#define WM5100_HP_STEP_SIZE_WIDTH 1 /* HP_STEP_SIZE */
+#define WM5100_HP_POLL 0x0001 /* HP_POLL */
+#define WM5100_HP_POLL_MASK 0x0001 /* HP_POLL */
+#define WM5100_HP_POLL_SHIFT 0 /* HP_POLL */
+#define WM5100_HP_POLL_WIDTH 1 /* HP_POLL */
+
+/*
+ * R649 (0x289) - Headphone Detect 2
+ */
+#define WM5100_HP_DONE 0x0080 /* HP_DONE */
+#define WM5100_HP_DONE_MASK 0x0080 /* HP_DONE */
+#define WM5100_HP_DONE_SHIFT 7 /* HP_DONE */
+#define WM5100_HP_DONE_WIDTH 1 /* HP_DONE */
+#define WM5100_HP_LVL_MASK 0x007F /* HP_LVL - [6:0] */
+#define WM5100_HP_LVL_SHIFT 0 /* HP_LVL - [6:0] */
+#define WM5100_HP_LVL_WIDTH 7 /* HP_LVL - [6:0] */
+
+/*
+ * R656 (0x290) - Mic Detect 1
+ */
+#define WM5100_ACCDET_BIAS_STARTTIME_MASK 0xF000 /* ACCDET_BIAS_STARTTIME - [15:12] */
+#define WM5100_ACCDET_BIAS_STARTTIME_SHIFT 12 /* ACCDET_BIAS_STARTTIME - [15:12] */
+#define WM5100_ACCDET_BIAS_STARTTIME_WIDTH 4 /* ACCDET_BIAS_STARTTIME - [15:12] */
+#define WM5100_ACCDET_RATE_MASK 0x0F00 /* ACCDET_RATE - [11:8] */
+#define WM5100_ACCDET_RATE_SHIFT 8 /* ACCDET_RATE - [11:8] */
+#define WM5100_ACCDET_RATE_WIDTH 4 /* ACCDET_RATE - [11:8] */
+#define WM5100_ACCDET_DBTIME 0x0002 /* ACCDET_DBTIME */
+#define WM5100_ACCDET_DBTIME_MASK 0x0002 /* ACCDET_DBTIME */
+#define WM5100_ACCDET_DBTIME_SHIFT 1 /* ACCDET_DBTIME */
+#define WM5100_ACCDET_DBTIME_WIDTH 1 /* ACCDET_DBTIME */
+#define WM5100_ACCDET_ENA 0x0001 /* ACCDET_ENA */
+#define WM5100_ACCDET_ENA_MASK 0x0001 /* ACCDET_ENA */
+#define WM5100_ACCDET_ENA_SHIFT 0 /* ACCDET_ENA */
+#define WM5100_ACCDET_ENA_WIDTH 1 /* ACCDET_ENA */
+
+/*
+ * R657 (0x291) - Mic Detect 2
+ */
+#define WM5100_ACCDET_LVL_SEL_MASK 0x00FF /* ACCDET_LVL_SEL - [7:0] */
+#define WM5100_ACCDET_LVL_SEL_SHIFT 0 /* ACCDET_LVL_SEL - [7:0] */
+#define WM5100_ACCDET_LVL_SEL_WIDTH 8 /* ACCDET_LVL_SEL - [7:0] */
+
+/*
+ * R658 (0x292) - Mic Detect 3
+ */
+#define WM5100_ACCDET_LVL_MASK 0x07FC /* ACCDET_LVL - [10:2] */
+#define WM5100_ACCDET_LVL_SHIFT 2 /* ACCDET_LVL - [10:2] */
+#define WM5100_ACCDET_LVL_WIDTH 9 /* ACCDET_LVL - [10:2] */
+#define WM5100_ACCDET_VALID 0x0002 /* ACCDET_VALID */
+#define WM5100_ACCDET_VALID_MASK 0x0002 /* ACCDET_VALID */
+#define WM5100_ACCDET_VALID_SHIFT 1 /* ACCDET_VALID */
+#define WM5100_ACCDET_VALID_WIDTH 1 /* ACCDET_VALID */
+#define WM5100_ACCDET_STS 0x0001 /* ACCDET_STS */
+#define WM5100_ACCDET_STS_MASK 0x0001 /* ACCDET_STS */
+#define WM5100_ACCDET_STS_SHIFT 0 /* ACCDET_STS */
+#define WM5100_ACCDET_STS_WIDTH 1 /* ACCDET_STS */
+
+/*
+ * R699 (0x2BB) - Misc Control
+ */
+#define WM5100_HPCOM_SRC 0x200 /* HPCOM_SRC */
+#define WM5100_HPCOM_SRC_SHIFT 9 /* HPCOM_SRC */
+
+/*
+ * R769 (0x301) - Input Enables
+ */
+#define WM5100_IN4L_ENA 0x0080 /* IN4L_ENA */
+#define WM5100_IN4L_ENA_MASK 0x0080 /* IN4L_ENA */
+#define WM5100_IN4L_ENA_SHIFT 7 /* IN4L_ENA */
+#define WM5100_IN4L_ENA_WIDTH 1 /* IN4L_ENA */
+#define WM5100_IN4R_ENA 0x0040 /* IN4R_ENA */
+#define WM5100_IN4R_ENA_MASK 0x0040 /* IN4R_ENA */
+#define WM5100_IN4R_ENA_SHIFT 6 /* IN4R_ENA */
+#define WM5100_IN4R_ENA_WIDTH 1 /* IN4R_ENA */
+#define WM5100_IN3L_ENA 0x0020 /* IN3L_ENA */
+#define WM5100_IN3L_ENA_MASK 0x0020 /* IN3L_ENA */
+#define WM5100_IN3L_ENA_SHIFT 5 /* IN3L_ENA */
+#define WM5100_IN3L_ENA_WIDTH 1 /* IN3L_ENA */
+#define WM5100_IN3R_ENA 0x0010 /* IN3R_ENA */
+#define WM5100_IN3R_ENA_MASK 0x0010 /* IN3R_ENA */
+#define WM5100_IN3R_ENA_SHIFT 4 /* IN3R_ENA */
+#define WM5100_IN3R_ENA_WIDTH 1 /* IN3R_ENA */
+#define WM5100_IN2L_ENA 0x0008 /* IN2L_ENA */
+#define WM5100_IN2L_ENA_MASK 0x0008 /* IN2L_ENA */
+#define WM5100_IN2L_ENA_SHIFT 3 /* IN2L_ENA */
+#define WM5100_IN2L_ENA_WIDTH 1 /* IN2L_ENA */
+#define WM5100_IN2R_ENA 0x0004 /* IN2R_ENA */
+#define WM5100_IN2R_ENA_MASK 0x0004 /* IN2R_ENA */
+#define WM5100_IN2R_ENA_SHIFT 2 /* IN2R_ENA */
+#define WM5100_IN2R_ENA_WIDTH 1 /* IN2R_ENA */
+#define WM5100_IN1L_ENA 0x0002 /* IN1L_ENA */
+#define WM5100_IN1L_ENA_MASK 0x0002 /* IN1L_ENA */
+#define WM5100_IN1L_ENA_SHIFT 1 /* IN1L_ENA */
+#define WM5100_IN1L_ENA_WIDTH 1 /* IN1L_ENA */
+#define WM5100_IN1R_ENA 0x0001 /* IN1R_ENA */
+#define WM5100_IN1R_ENA_MASK 0x0001 /* IN1R_ENA */
+#define WM5100_IN1R_ENA_SHIFT 0 /* IN1R_ENA */
+#define WM5100_IN1R_ENA_WIDTH 1 /* IN1R_ENA */
+
+/*
+ * R770 (0x302) - Input Enables Status
+ */
+#define WM5100_IN4L_ENA_STS 0x0080 /* IN4L_ENA_STS */
+#define WM5100_IN4L_ENA_STS_MASK 0x0080 /* IN4L_ENA_STS */
+#define WM5100_IN4L_ENA_STS_SHIFT 7 /* IN4L_ENA_STS */
+#define WM5100_IN4L_ENA_STS_WIDTH 1 /* IN4L_ENA_STS */
+#define WM5100_IN4R_ENA_STS 0x0040 /* IN4R_ENA_STS */
+#define WM5100_IN4R_ENA_STS_MASK 0x0040 /* IN4R_ENA_STS */
+#define WM5100_IN4R_ENA_STS_SHIFT 6 /* IN4R_ENA_STS */
+#define WM5100_IN4R_ENA_STS_WIDTH 1 /* IN4R_ENA_STS */
+#define WM5100_IN3L_ENA_STS 0x0020 /* IN3L_ENA_STS */
+#define WM5100_IN3L_ENA_STS_MASK 0x0020 /* IN3L_ENA_STS */
+#define WM5100_IN3L_ENA_STS_SHIFT 5 /* IN3L_ENA_STS */
+#define WM5100_IN3L_ENA_STS_WIDTH 1 /* IN3L_ENA_STS */
+#define WM5100_IN3R_ENA_STS 0x0010 /* IN3R_ENA_STS */
+#define WM5100_IN3R_ENA_STS_MASK 0x0010 /* IN3R_ENA_STS */
+#define WM5100_IN3R_ENA_STS_SHIFT 4 /* IN3R_ENA_STS */
+#define WM5100_IN3R_ENA_STS_WIDTH 1 /* IN3R_ENA_STS */
+#define WM5100_IN2L_ENA_STS 0x0008 /* IN2L_ENA_STS */
+#define WM5100_IN2L_ENA_STS_MASK 0x0008 /* IN2L_ENA_STS */
+#define WM5100_IN2L_ENA_STS_SHIFT 3 /* IN2L_ENA_STS */
+#define WM5100_IN2L_ENA_STS_WIDTH 1 /* IN2L_ENA_STS */
+#define WM5100_IN2R_ENA_STS 0x0004 /* IN2R_ENA_STS */
+#define WM5100_IN2R_ENA_STS_MASK 0x0004 /* IN2R_ENA_STS */
+#define WM5100_IN2R_ENA_STS_SHIFT 2 /* IN2R_ENA_STS */
+#define WM5100_IN2R_ENA_STS_WIDTH 1 /* IN2R_ENA_STS */
+#define WM5100_IN1L_ENA_STS 0x0002 /* IN1L_ENA_STS */
+#define WM5100_IN1L_ENA_STS_MASK 0x0002 /* IN1L_ENA_STS */
+#define WM5100_IN1L_ENA_STS_SHIFT 1 /* IN1L_ENA_STS */
+#define WM5100_IN1L_ENA_STS_WIDTH 1 /* IN1L_ENA_STS */
+#define WM5100_IN1R_ENA_STS 0x0001 /* IN1R_ENA_STS */
+#define WM5100_IN1R_ENA_STS_MASK 0x0001 /* IN1R_ENA_STS */
+#define WM5100_IN1R_ENA_STS_SHIFT 0 /* IN1R_ENA_STS */
+#define WM5100_IN1R_ENA_STS_WIDTH 1 /* IN1R_ENA_STS */
+
+/*
+ * R784 (0x310) - IN1L Control
+ */
+#define WM5100_IN_RATE_MASK 0xC000 /* IN_RATE - [15:14] */
+#define WM5100_IN_RATE_SHIFT 14 /* IN_RATE - [15:14] */
+#define WM5100_IN_RATE_WIDTH 2 /* IN_RATE - [15:14] */
+#define WM5100_IN1_OSR 0x2000 /* IN1_OSR */
+#define WM5100_IN1_OSR_MASK 0x2000 /* IN1_OSR */
+#define WM5100_IN1_OSR_SHIFT 13 /* IN1_OSR */
+#define WM5100_IN1_OSR_WIDTH 1 /* IN1_OSR */
+#define WM5100_IN1_DMIC_SUP_MASK 0x1800 /* IN1_DMIC_SUP - [12:11] */
+#define WM5100_IN1_DMIC_SUP_SHIFT 11 /* IN1_DMIC_SUP - [12:11] */
+#define WM5100_IN1_DMIC_SUP_WIDTH 2 /* IN1_DMIC_SUP - [12:11] */
+#define WM5100_IN1_MODE_MASK 0x0600 /* IN1_MODE - [10:9] */
+#define WM5100_IN1_MODE_SHIFT 9 /* IN1_MODE - [10:9] */
+#define WM5100_IN1_MODE_WIDTH 2 /* IN1_MODE - [10:9] */
+#define WM5100_IN1L_PGA_VOL_MASK 0x00FE /* IN1L_PGA_VOL - [7:1] */
+#define WM5100_IN1L_PGA_VOL_SHIFT 1 /* IN1L_PGA_VOL - [7:1] */
+#define WM5100_IN1L_PGA_VOL_WIDTH 7 /* IN1L_PGA_VOL - [7:1] */
+
+/*
+ * R785 (0x311) - IN1R Control
+ */
+#define WM5100_IN1R_PGA_VOL_MASK 0x00FE /* IN1R_PGA_VOL - [7:1] */
+#define WM5100_IN1R_PGA_VOL_SHIFT 1 /* IN1R_PGA_VOL - [7:1] */
+#define WM5100_IN1R_PGA_VOL_WIDTH 7 /* IN1R_PGA_VOL - [7:1] */
+
+/*
+ * R786 (0x312) - IN2L Control
+ */
+#define WM5100_IN2_OSR 0x2000 /* IN2_OSR */
+#define WM5100_IN2_OSR_MASK 0x2000 /* IN2_OSR */
+#define WM5100_IN2_OSR_SHIFT 13 /* IN2_OSR */
+#define WM5100_IN2_OSR_WIDTH 1 /* IN2_OSR */
+#define WM5100_IN2_DMIC_SUP_MASK 0x1800 /* IN2_DMIC_SUP - [12:11] */
+#define WM5100_IN2_DMIC_SUP_SHIFT 11 /* IN2_DMIC_SUP - [12:11] */
+#define WM5100_IN2_DMIC_SUP_WIDTH 2 /* IN2_DMIC_SUP - [12:11] */
+#define WM5100_IN2_MODE_MASK 0x0600 /* IN2_MODE - [10:9] */
+#define WM5100_IN2_MODE_SHIFT 9 /* IN2_MODE - [10:9] */
+#define WM5100_IN2_MODE_WIDTH 2 /* IN2_MODE - [10:9] */
+#define WM5100_IN2L_PGA_VOL_MASK 0x00FE /* IN2L_PGA_VOL - [7:1] */
+#define WM5100_IN2L_PGA_VOL_SHIFT 1 /* IN2L_PGA_VOL - [7:1] */
+#define WM5100_IN2L_PGA_VOL_WIDTH 7 /* IN2L_PGA_VOL - [7:1] */
+
+/*
+ * R787 (0x313) - IN2R Control
+ */
+#define WM5100_IN2R_PGA_VOL_MASK 0x00FE /* IN2R_PGA_VOL - [7:1] */
+#define WM5100_IN2R_PGA_VOL_SHIFT 1 /* IN2R_PGA_VOL - [7:1] */
+#define WM5100_IN2R_PGA_VOL_WIDTH 7 /* IN2R_PGA_VOL - [7:1] */
+
+/*
+ * R788 (0x314) - IN3L Control
+ */
+#define WM5100_IN3_OSR 0x2000 /* IN3_OSR */
+#define WM5100_IN3_OSR_MASK 0x2000 /* IN3_OSR */
+#define WM5100_IN3_OSR_SHIFT 13 /* IN3_OSR */
+#define WM5100_IN3_OSR_WIDTH 1 /* IN3_OSR */
+#define WM5100_IN3_DMIC_SUP_MASK 0x1800 /* IN3_DMIC_SUP - [12:11] */
+#define WM5100_IN3_DMIC_SUP_SHIFT 11 /* IN3_DMIC_SUP - [12:11] */
+#define WM5100_IN3_DMIC_SUP_WIDTH 2 /* IN3_DMIC_SUP - [12:11] */
+#define WM5100_IN3_MODE_MASK 0x0600 /* IN3_MODE - [10:9] */
+#define WM5100_IN3_MODE_SHIFT 9 /* IN3_MODE - [10:9] */
+#define WM5100_IN3_MODE_WIDTH 2 /* IN3_MODE - [10:9] */
+#define WM5100_IN3L_PGA_VOL_MASK 0x00FE /* IN3L_PGA_VOL - [7:1] */
+#define WM5100_IN3L_PGA_VOL_SHIFT 1 /* IN3L_PGA_VOL - [7:1] */
+#define WM5100_IN3L_PGA_VOL_WIDTH 7 /* IN3L_PGA_VOL - [7:1] */
+
+/*
+ * R789 (0x315) - IN3R Control
+ */
+#define WM5100_IN3R_PGA_VOL_MASK 0x00FE /* IN3R_PGA_VOL - [7:1] */
+#define WM5100_IN3R_PGA_VOL_SHIFT 1 /* IN3R_PGA_VOL - [7:1] */
+#define WM5100_IN3R_PGA_VOL_WIDTH 7 /* IN3R_PGA_VOL - [7:1] */
+
+/*
+ * R790 (0x316) - IN4L Control
+ */
+#define WM5100_IN4_OSR 0x2000 /* IN4_OSR */
+#define WM5100_IN4_OSR_MASK 0x2000 /* IN4_OSR */
+#define WM5100_IN4_OSR_SHIFT 13 /* IN4_OSR */
+#define WM5100_IN4_OSR_WIDTH 1 /* IN4_OSR */
+#define WM5100_IN4_DMIC_SUP_MASK 0x1800 /* IN4_DMIC_SUP - [12:11] */
+#define WM5100_IN4_DMIC_SUP_SHIFT 11 /* IN4_DMIC_SUP - [12:11] */
+#define WM5100_IN4_DMIC_SUP_WIDTH 2 /* IN4_DMIC_SUP - [12:11] */
+#define WM5100_IN4_MODE_MASK 0x0600 /* IN4_MODE - [10:9] */
+#define WM5100_IN4_MODE_SHIFT 9 /* IN4_MODE - [10:9] */
+#define WM5100_IN4_MODE_WIDTH 2 /* IN4_MODE - [10:9] */
+#define WM5100_IN4L_PGA_VOL_MASK 0x00FE /* IN4L_PGA_VOL - [7:1] */
+#define WM5100_IN4L_PGA_VOL_SHIFT 1 /* IN4L_PGA_VOL - [7:1] */
+#define WM5100_IN4L_PGA_VOL_WIDTH 7 /* IN4L_PGA_VOL - [7:1] */
+
+/*
+ * R791 (0x317) - IN4R Control
+ */
+#define WM5100_IN4R_PGA_VOL_MASK 0x00FE /* IN4R_PGA_VOL - [7:1] */
+#define WM5100_IN4R_PGA_VOL_SHIFT 1 /* IN4R_PGA_VOL - [7:1] */
+#define WM5100_IN4R_PGA_VOL_WIDTH 7 /* IN4R_PGA_VOL - [7:1] */
+
+/*
+ * R792 (0x318) - RXANC_SRC
+ */
+#define WM5100_IN_RXANC_SEL_MASK 0x0007 /* IN_RXANC_SEL - [2:0] */
+#define WM5100_IN_RXANC_SEL_SHIFT 0 /* IN_RXANC_SEL - [2:0] */
+#define WM5100_IN_RXANC_SEL_WIDTH 3 /* IN_RXANC_SEL - [2:0] */
+
+/*
+ * R793 (0x319) - Input Volume Ramp
+ */
+#define WM5100_IN_VD_RAMP_MASK 0x0070 /* IN_VD_RAMP - [6:4] */
+#define WM5100_IN_VD_RAMP_SHIFT 4 /* IN_VD_RAMP - [6:4] */
+#define WM5100_IN_VD_RAMP_WIDTH 3 /* IN_VD_RAMP - [6:4] */
+#define WM5100_IN_VI_RAMP_MASK 0x0007 /* IN_VI_RAMP - [2:0] */
+#define WM5100_IN_VI_RAMP_SHIFT 0 /* IN_VI_RAMP - [2:0] */
+#define WM5100_IN_VI_RAMP_WIDTH 3 /* IN_VI_RAMP - [2:0] */
+
+/*
+ * R800 (0x320) - ADC Digital Volume 1L
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN1L_MUTE 0x0100 /* IN1L_MUTE */
+#define WM5100_IN1L_MUTE_MASK 0x0100 /* IN1L_MUTE */
+#define WM5100_IN1L_MUTE_SHIFT 8 /* IN1L_MUTE */
+#define WM5100_IN1L_MUTE_WIDTH 1 /* IN1L_MUTE */
+#define WM5100_IN1L_VOL_MASK 0x00FF /* IN1L_VOL - [7:0] */
+#define WM5100_IN1L_VOL_SHIFT 0 /* IN1L_VOL - [7:0] */
+#define WM5100_IN1L_VOL_WIDTH 8 /* IN1L_VOL - [7:0] */
+
+/*
+ * R801 (0x321) - ADC Digital Volume 1R
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN1R_MUTE 0x0100 /* IN1R_MUTE */
+#define WM5100_IN1R_MUTE_MASK 0x0100 /* IN1R_MUTE */
+#define WM5100_IN1R_MUTE_SHIFT 8 /* IN1R_MUTE */
+#define WM5100_IN1R_MUTE_WIDTH 1 /* IN1R_MUTE */
+#define WM5100_IN1R_VOL_MASK 0x00FF /* IN1R_VOL - [7:0] */
+#define WM5100_IN1R_VOL_SHIFT 0 /* IN1R_VOL - [7:0] */
+#define WM5100_IN1R_VOL_WIDTH 8 /* IN1R_VOL - [7:0] */
+
+/*
+ * R802 (0x322) - ADC Digital Volume 2L
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN2L_MUTE 0x0100 /* IN2L_MUTE */
+#define WM5100_IN2L_MUTE_MASK 0x0100 /* IN2L_MUTE */
+#define WM5100_IN2L_MUTE_SHIFT 8 /* IN2L_MUTE */
+#define WM5100_IN2L_MUTE_WIDTH 1 /* IN2L_MUTE */
+#define WM5100_IN2L_VOL_MASK 0x00FF /* IN2L_VOL - [7:0] */
+#define WM5100_IN2L_VOL_SHIFT 0 /* IN2L_VOL - [7:0] */
+#define WM5100_IN2L_VOL_WIDTH 8 /* IN2L_VOL - [7:0] */
+
+/*
+ * R803 (0x323) - ADC Digital Volume 2R
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN2R_MUTE 0x0100 /* IN2R_MUTE */
+#define WM5100_IN2R_MUTE_MASK 0x0100 /* IN2R_MUTE */
+#define WM5100_IN2R_MUTE_SHIFT 8 /* IN2R_MUTE */
+#define WM5100_IN2R_MUTE_WIDTH 1 /* IN2R_MUTE */
+#define WM5100_IN2R_VOL_MASK 0x00FF /* IN2R_VOL - [7:0] */
+#define WM5100_IN2R_VOL_SHIFT 0 /* IN2R_VOL - [7:0] */
+#define WM5100_IN2R_VOL_WIDTH 8 /* IN2R_VOL - [7:0] */
+
+/*
+ * R804 (0x324) - ADC Digital Volume 3L
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN3L_MUTE 0x0100 /* IN3L_MUTE */
+#define WM5100_IN3L_MUTE_MASK 0x0100 /* IN3L_MUTE */
+#define WM5100_IN3L_MUTE_SHIFT 8 /* IN3L_MUTE */
+#define WM5100_IN3L_MUTE_WIDTH 1 /* IN3L_MUTE */
+#define WM5100_IN3L_VOL_MASK 0x00FF /* IN3L_VOL - [7:0] */
+#define WM5100_IN3L_VOL_SHIFT 0 /* IN3L_VOL - [7:0] */
+#define WM5100_IN3L_VOL_WIDTH 8 /* IN3L_VOL - [7:0] */
+
+/*
+ * R805 (0x325) - ADC Digital Volume 3R
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN3R_MUTE 0x0100 /* IN3R_MUTE */
+#define WM5100_IN3R_MUTE_MASK 0x0100 /* IN3R_MUTE */
+#define WM5100_IN3R_MUTE_SHIFT 8 /* IN3R_MUTE */
+#define WM5100_IN3R_MUTE_WIDTH 1 /* IN3R_MUTE */
+#define WM5100_IN3R_VOL_MASK 0x00FF /* IN3R_VOL - [7:0] */
+#define WM5100_IN3R_VOL_SHIFT 0 /* IN3R_VOL - [7:0] */
+#define WM5100_IN3R_VOL_WIDTH 8 /* IN3R_VOL - [7:0] */
+
+/*
+ * R806 (0x326) - ADC Digital Volume 4L
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN4L_MUTE 0x0100 /* IN4L_MUTE */
+#define WM5100_IN4L_MUTE_MASK 0x0100 /* IN4L_MUTE */
+#define WM5100_IN4L_MUTE_SHIFT 8 /* IN4L_MUTE */
+#define WM5100_IN4L_MUTE_WIDTH 1 /* IN4L_MUTE */
+#define WM5100_IN4L_VOL_MASK 0x00FF /* IN4L_VOL - [7:0] */
+#define WM5100_IN4L_VOL_SHIFT 0 /* IN4L_VOL - [7:0] */
+#define WM5100_IN4L_VOL_WIDTH 8 /* IN4L_VOL - [7:0] */
+
+/*
+ * R807 (0x327) - ADC Digital Volume 4R
+ */
+#define WM5100_IN_VU 0x0200 /* IN_VU */
+#define WM5100_IN_VU_MASK 0x0200 /* IN_VU */
+#define WM5100_IN_VU_SHIFT 9 /* IN_VU */
+#define WM5100_IN_VU_WIDTH 1 /* IN_VU */
+#define WM5100_IN4R_MUTE 0x0100 /* IN4R_MUTE */
+#define WM5100_IN4R_MUTE_MASK 0x0100 /* IN4R_MUTE */
+#define WM5100_IN4R_MUTE_SHIFT 8 /* IN4R_MUTE */
+#define WM5100_IN4R_MUTE_WIDTH 1 /* IN4R_MUTE */
+#define WM5100_IN4R_VOL_MASK 0x00FF /* IN4R_VOL - [7:0] */
+#define WM5100_IN4R_VOL_SHIFT 0 /* IN4R_VOL - [7:0] */
+#define WM5100_IN4R_VOL_WIDTH 8 /* IN4R_VOL - [7:0] */
+
+/*
+ * R1025 (0x401) - Output Enables 2
+ */
+#define WM5100_OUT6L_ENA 0x0800 /* OUT6L_ENA */
+#define WM5100_OUT6L_ENA_MASK 0x0800 /* OUT6L_ENA */
+#define WM5100_OUT6L_ENA_SHIFT 11 /* OUT6L_ENA */
+#define WM5100_OUT6L_ENA_WIDTH 1 /* OUT6L_ENA */
+#define WM5100_OUT6R_ENA 0x0400 /* OUT6R_ENA */
+#define WM5100_OUT6R_ENA_MASK 0x0400 /* OUT6R_ENA */
+#define WM5100_OUT6R_ENA_SHIFT 10 /* OUT6R_ENA */
+#define WM5100_OUT6R_ENA_WIDTH 1 /* OUT6R_ENA */
+#define WM5100_OUT5L_ENA 0x0200 /* OUT5L_ENA */
+#define WM5100_OUT5L_ENA_MASK 0x0200 /* OUT5L_ENA */
+#define WM5100_OUT5L_ENA_SHIFT 9 /* OUT5L_ENA */
+#define WM5100_OUT5L_ENA_WIDTH 1 /* OUT5L_ENA */
+#define WM5100_OUT5R_ENA 0x0100 /* OUT5R_ENA */
+#define WM5100_OUT5R_ENA_MASK 0x0100 /* OUT5R_ENA */
+#define WM5100_OUT5R_ENA_SHIFT 8 /* OUT5R_ENA */
+#define WM5100_OUT5R_ENA_WIDTH 1 /* OUT5R_ENA */
+#define WM5100_OUT4L_ENA 0x0080 /* OUT4L_ENA */
+#define WM5100_OUT4L_ENA_MASK 0x0080 /* OUT4L_ENA */
+#define WM5100_OUT4L_ENA_SHIFT 7 /* OUT4L_ENA */
+#define WM5100_OUT4L_ENA_WIDTH 1 /* OUT4L_ENA */
+#define WM5100_OUT4R_ENA 0x0040 /* OUT4R_ENA */
+#define WM5100_OUT4R_ENA_MASK 0x0040 /* OUT4R_ENA */
+#define WM5100_OUT4R_ENA_SHIFT 6 /* OUT4R_ENA */
+#define WM5100_OUT4R_ENA_WIDTH 1 /* OUT4R_ENA */
+
+/*
+ * R1026 (0x402) - Output Status 1
+ */
+#define WM5100_OUT3L_ENA_STS 0x0020 /* OUT3L_ENA_STS */
+#define WM5100_OUT3L_ENA_STS_MASK 0x0020 /* OUT3L_ENA_STS */
+#define WM5100_OUT3L_ENA_STS_SHIFT 5 /* OUT3L_ENA_STS */
+#define WM5100_OUT3L_ENA_STS_WIDTH 1 /* OUT3L_ENA_STS */
+#define WM5100_OUT3R_ENA_STS 0x0010 /* OUT3R_ENA_STS */
+#define WM5100_OUT3R_ENA_STS_MASK 0x0010 /* OUT3R_ENA_STS */
+#define WM5100_OUT3R_ENA_STS_SHIFT 4 /* OUT3R_ENA_STS */
+#define WM5100_OUT3R_ENA_STS_WIDTH 1 /* OUT3R_ENA_STS */
+#define WM5100_OUT2L_ENA_STS 0x0008 /* OUT2L_ENA_STS */
+#define WM5100_OUT2L_ENA_STS_MASK 0x0008 /* OUT2L_ENA_STS */
+#define WM5100_OUT2L_ENA_STS_SHIFT 3 /* OUT2L_ENA_STS */
+#define WM5100_OUT2L_ENA_STS_WIDTH 1 /* OUT2L_ENA_STS */
+#define WM5100_OUT2R_ENA_STS 0x0004 /* OUT2R_ENA_STS */
+#define WM5100_OUT2R_ENA_STS_MASK 0x0004 /* OUT2R_ENA_STS */
+#define WM5100_OUT2R_ENA_STS_SHIFT 2 /* OUT2R_ENA_STS */
+#define WM5100_OUT2R_ENA_STS_WIDTH 1 /* OUT2R_ENA_STS */
+#define WM5100_OUT1L_ENA_STS 0x0002 /* OUT1L_ENA_STS */
+#define WM5100_OUT1L_ENA_STS_MASK 0x0002 /* OUT1L_ENA_STS */
+#define WM5100_OUT1L_ENA_STS_SHIFT 1 /* OUT1L_ENA_STS */
+#define WM5100_OUT1L_ENA_STS_WIDTH 1 /* OUT1L_ENA_STS */
+#define WM5100_OUT1R_ENA_STS 0x0001 /* OUT1R_ENA_STS */
+#define WM5100_OUT1R_ENA_STS_MASK 0x0001 /* OUT1R_ENA_STS */
+#define WM5100_OUT1R_ENA_STS_SHIFT 0 /* OUT1R_ENA_STS */
+#define WM5100_OUT1R_ENA_STS_WIDTH 1 /* OUT1R_ENA_STS */
+
+/*
+ * R1027 (0x403) - Output Status 2
+ */
+#define WM5100_OUT6L_ENA_STS 0x0800 /* OUT6L_ENA_STS */
+#define WM5100_OUT6L_ENA_STS_MASK 0x0800 /* OUT6L_ENA_STS */
+#define WM5100_OUT6L_ENA_STS_SHIFT 11 /* OUT6L_ENA_STS */
+#define WM5100_OUT6L_ENA_STS_WIDTH 1 /* OUT6L_ENA_STS */
+#define WM5100_OUT6R_ENA_STS 0x0400 /* OUT6R_ENA_STS */
+#define WM5100_OUT6R_ENA_STS_MASK 0x0400 /* OUT6R_ENA_STS */
+#define WM5100_OUT6R_ENA_STS_SHIFT 10 /* OUT6R_ENA_STS */
+#define WM5100_OUT6R_ENA_STS_WIDTH 1 /* OUT6R_ENA_STS */
+#define WM5100_OUT5L_ENA_STS 0x0200 /* OUT5L_ENA_STS */
+#define WM5100_OUT5L_ENA_STS_MASK 0x0200 /* OUT5L_ENA_STS */
+#define WM5100_OUT5L_ENA_STS_SHIFT 9 /* OUT5L_ENA_STS */
+#define WM5100_OUT5L_ENA_STS_WIDTH 1 /* OUT5L_ENA_STS */
+#define WM5100_OUT5R_ENA_STS 0x0100 /* OUT5R_ENA_STS */
+#define WM5100_OUT5R_ENA_STS_MASK 0x0100 /* OUT5R_ENA_STS */
+#define WM5100_OUT5R_ENA_STS_SHIFT 8 /* OUT5R_ENA_STS */
+#define WM5100_OUT5R_ENA_STS_WIDTH 1 /* OUT5R_ENA_STS */
+#define WM5100_OUT4L_ENA_STS 0x0080 /* OUT4L_ENA_STS */
+#define WM5100_OUT4L_ENA_STS_MASK 0x0080 /* OUT4L_ENA_STS */
+#define WM5100_OUT4L_ENA_STS_SHIFT 7 /* OUT4L_ENA_STS */
+#define WM5100_OUT4L_ENA_STS_WIDTH 1 /* OUT4L_ENA_STS */
+#define WM5100_OUT4R_ENA_STS 0x0040 /* OUT4R_ENA_STS */
+#define WM5100_OUT4R_ENA_STS_MASK 0x0040 /* OUT4R_ENA_STS */
+#define WM5100_OUT4R_ENA_STS_SHIFT 6 /* OUT4R_ENA_STS */
+#define WM5100_OUT4R_ENA_STS_WIDTH 1 /* OUT4R_ENA_STS */
+
+/*
+ * R1032 (0x408) - Channel Enables 1
+ */
+#define WM5100_HP3L_ENA 0x0020 /* HP3L_ENA */
+#define WM5100_HP3L_ENA_MASK 0x0020 /* HP3L_ENA */
+#define WM5100_HP3L_ENA_SHIFT 5 /* HP3L_ENA */
+#define WM5100_HP3L_ENA_WIDTH 1 /* HP3L_ENA */
+#define WM5100_HP3R_ENA 0x0010 /* HP3R_ENA */
+#define WM5100_HP3R_ENA_MASK 0x0010 /* HP3R_ENA */
+#define WM5100_HP3R_ENA_SHIFT 4 /* HP3R_ENA */
+#define WM5100_HP3R_ENA_WIDTH 1 /* HP3R_ENA */
+#define WM5100_HP2L_ENA 0x0008 /* HP2L_ENA */
+#define WM5100_HP2L_ENA_MASK 0x0008 /* HP2L_ENA */
+#define WM5100_HP2L_ENA_SHIFT 3 /* HP2L_ENA */
+#define WM5100_HP2L_ENA_WIDTH 1 /* HP2L_ENA */
+#define WM5100_HP2R_ENA 0x0004 /* HP2R_ENA */
+#define WM5100_HP2R_ENA_MASK 0x0004 /* HP2R_ENA */
+#define WM5100_HP2R_ENA_SHIFT 2 /* HP2R_ENA */
+#define WM5100_HP2R_ENA_WIDTH 1 /* HP2R_ENA */
+#define WM5100_HP1L_ENA 0x0002 /* HP1L_ENA */
+#define WM5100_HP1L_ENA_MASK 0x0002 /* HP1L_ENA */
+#define WM5100_HP1L_ENA_SHIFT 1 /* HP1L_ENA */
+#define WM5100_HP1L_ENA_WIDTH 1 /* HP1L_ENA */
+#define WM5100_HP1R_ENA 0x0001 /* HP1R_ENA */
+#define WM5100_HP1R_ENA_MASK 0x0001 /* HP1R_ENA */
+#define WM5100_HP1R_ENA_SHIFT 0 /* HP1R_ENA */
+#define WM5100_HP1R_ENA_WIDTH 1 /* HP1R_ENA */
+
+/*
+ * R1040 (0x410) - Out Volume 1L
+ */
+#define WM5100_OUT_RATE_MASK 0xC000 /* OUT_RATE - [15:14] */
+#define WM5100_OUT_RATE_SHIFT 14 /* OUT_RATE - [15:14] */
+#define WM5100_OUT_RATE_WIDTH 2 /* OUT_RATE - [15:14] */
+#define WM5100_OUT1_OSR 0x2000 /* OUT1_OSR */
+#define WM5100_OUT1_OSR_MASK 0x2000 /* OUT1_OSR */
+#define WM5100_OUT1_OSR_SHIFT 13 /* OUT1_OSR */
+#define WM5100_OUT1_OSR_WIDTH 1 /* OUT1_OSR */
+#define WM5100_OUT1_MONO 0x1000 /* OUT1_MONO */
+#define WM5100_OUT1_MONO_MASK 0x1000 /* OUT1_MONO */
+#define WM5100_OUT1_MONO_SHIFT 12 /* OUT1_MONO */
+#define WM5100_OUT1_MONO_WIDTH 1 /* OUT1_MONO */
+#define WM5100_OUT1L_ANC_SRC 0x0800 /* OUT1L_ANC_SRC */
+#define WM5100_OUT1L_ANC_SRC_MASK 0x0800 /* OUT1L_ANC_SRC */
+#define WM5100_OUT1L_ANC_SRC_SHIFT 11 /* OUT1L_ANC_SRC */
+#define WM5100_OUT1L_ANC_SRC_WIDTH 1 /* OUT1L_ANC_SRC */
+#define WM5100_OUT1L_PGA_VOL_MASK 0x00FE /* OUT1L_PGA_VOL - [7:1] */
+#define WM5100_OUT1L_PGA_VOL_SHIFT 1 /* OUT1L_PGA_VOL - [7:1] */
+#define WM5100_OUT1L_PGA_VOL_WIDTH 7 /* OUT1L_PGA_VOL - [7:1] */
+
+/*
+ * R1041 (0x411) - Out Volume 1R
+ */
+#define WM5100_OUT1R_ANC_SRC 0x0800 /* OUT1R_ANC_SRC */
+#define WM5100_OUT1R_ANC_SRC_MASK 0x0800 /* OUT1R_ANC_SRC */
+#define WM5100_OUT1R_ANC_SRC_SHIFT 11 /* OUT1R_ANC_SRC */
+#define WM5100_OUT1R_ANC_SRC_WIDTH 1 /* OUT1R_ANC_SRC */
+#define WM5100_OUT1R_PGA_VOL_MASK 0x00FE /* OUT1R_PGA_VOL - [7:1] */
+#define WM5100_OUT1R_PGA_VOL_SHIFT 1 /* OUT1R_PGA_VOL - [7:1] */
+#define WM5100_OUT1R_PGA_VOL_WIDTH 7 /* OUT1R_PGA_VOL - [7:1] */
+
+/*
+ * R1042 (0x412) - DAC Volume Limit 1L
+ */
+#define WM5100_OUT1L_VOL_LIM_MASK 0x00FF /* OUT1L_VOL_LIM - [7:0] */
+#define WM5100_OUT1L_VOL_LIM_SHIFT 0 /* OUT1L_VOL_LIM - [7:0] */
+#define WM5100_OUT1L_VOL_LIM_WIDTH 8 /* OUT1L_VOL_LIM - [7:0] */
+
+/*
+ * R1043 (0x413) - DAC Volume Limit 1R
+ */
+#define WM5100_OUT1R_VOL_LIM_MASK 0x00FF /* OUT1R_VOL_LIM - [7:0] */
+#define WM5100_OUT1R_VOL_LIM_SHIFT 0 /* OUT1R_VOL_LIM - [7:0] */
+#define WM5100_OUT1R_VOL_LIM_WIDTH 8 /* OUT1R_VOL_LIM - [7:0] */
+
+/*
+ * R1044 (0x414) - Out Volume 2L
+ */
+#define WM5100_OUT2_OSR 0x2000 /* OUT2_OSR */
+#define WM5100_OUT2_OSR_MASK 0x2000 /* OUT2_OSR */
+#define WM5100_OUT2_OSR_SHIFT 13 /* OUT2_OSR */
+#define WM5100_OUT2_OSR_WIDTH 1 /* OUT2_OSR */
+#define WM5100_OUT2_MONO 0x1000 /* OUT2_MONO */
+#define WM5100_OUT2_MONO_MASK 0x1000 /* OUT2_MONO */
+#define WM5100_OUT2_MONO_SHIFT 12 /* OUT2_MONO */
+#define WM5100_OUT2_MONO_WIDTH 1 /* OUT2_MONO */
+#define WM5100_OUT2L_ANC_SRC 0x0800 /* OUT2L_ANC_SRC */
+#define WM5100_OUT2L_ANC_SRC_MASK 0x0800 /* OUT2L_ANC_SRC */
+#define WM5100_OUT2L_ANC_SRC_SHIFT 11 /* OUT2L_ANC_SRC */
+#define WM5100_OUT2L_ANC_SRC_WIDTH 1 /* OUT2L_ANC_SRC */
+#define WM5100_OUT2L_PGA_VOL_MASK 0x00FE /* OUT2L_PGA_VOL - [7:1] */
+#define WM5100_OUT2L_PGA_VOL_SHIFT 1 /* OUT2L_PGA_VOL - [7:1] */
+#define WM5100_OUT2L_PGA_VOL_WIDTH 7 /* OUT2L_PGA_VOL - [7:1] */
+
+/*
+ * R1045 (0x415) - Out Volume 2R
+ */
+#define WM5100_OUT2R_ANC_SRC 0x0800 /* OUT2R_ANC_SRC */
+#define WM5100_OUT2R_ANC_SRC_MASK 0x0800 /* OUT2R_ANC_SRC */
+#define WM5100_OUT2R_ANC_SRC_SHIFT 11 /* OUT2R_ANC_SRC */
+#define WM5100_OUT2R_ANC_SRC_WIDTH 1 /* OUT2R_ANC_SRC */
+#define WM5100_OUT2R_PGA_VOL_MASK 0x00FE /* OUT2R_PGA_VOL - [7:1] */
+#define WM5100_OUT2R_PGA_VOL_SHIFT 1 /* OUT2R_PGA_VOL - [7:1] */
+#define WM5100_OUT2R_PGA_VOL_WIDTH 7 /* OUT2R_PGA_VOL - [7:1] */
+
+/*
+ * R1046 (0x416) - DAC Volume Limit 2L
+ */
+#define WM5100_OUT2L_VOL_LIM_MASK 0x00FF /* OUT2L_VOL_LIM - [7:0] */
+#define WM5100_OUT2L_VOL_LIM_SHIFT 0 /* OUT2L_VOL_LIM - [7:0] */
+#define WM5100_OUT2L_VOL_LIM_WIDTH 8 /* OUT2L_VOL_LIM - [7:0] */
+
+/*
+ * R1047 (0x417) - DAC Volume Limit 2R
+ */
+#define WM5100_OUT2R_VOL_LIM_MASK 0x00FF /* OUT2R_VOL_LIM - [7:0] */
+#define WM5100_OUT2R_VOL_LIM_SHIFT 0 /* OUT2R_VOL_LIM - [7:0] */
+#define WM5100_OUT2R_VOL_LIM_WIDTH 8 /* OUT2R_VOL_LIM - [7:0] */
+
+/*
+ * R1048 (0x418) - Out Volume 3L
+ */
+#define WM5100_OUT3_OSR 0x2000 /* OUT3_OSR */
+#define WM5100_OUT3_OSR_MASK 0x2000 /* OUT3_OSR */
+#define WM5100_OUT3_OSR_SHIFT 13 /* OUT3_OSR */
+#define WM5100_OUT3_OSR_WIDTH 1 /* OUT3_OSR */
+#define WM5100_OUT3_MONO 0x1000 /* OUT3_MONO */
+#define WM5100_OUT3_MONO_MASK 0x1000 /* OUT3_MONO */
+#define WM5100_OUT3_MONO_SHIFT 12 /* OUT3_MONO */
+#define WM5100_OUT3_MONO_WIDTH 1 /* OUT3_MONO */
+#define WM5100_OUT3L_ANC_SRC 0x0800 /* OUT3L_ANC_SRC */
+#define WM5100_OUT3L_ANC_SRC_MASK 0x0800 /* OUT3L_ANC_SRC */
+#define WM5100_OUT3L_ANC_SRC_SHIFT 11 /* OUT3L_ANC_SRC */
+#define WM5100_OUT3L_ANC_SRC_WIDTH 1 /* OUT3L_ANC_SRC */
+#define WM5100_OUT3L_PGA_VOL_MASK 0x00FE /* OUT3L_PGA_VOL - [7:1] */
+#define WM5100_OUT3L_PGA_VOL_SHIFT 1 /* OUT3L_PGA_VOL - [7:1] */
+#define WM5100_OUT3L_PGA_VOL_WIDTH 7 /* OUT3L_PGA_VOL - [7:1] */
+
+/*
+ * R1049 (0x419) - Out Volume 3R
+ */
+#define WM5100_OUT3R_ANC_SRC 0x0800 /* OUT3R_ANC_SRC */
+#define WM5100_OUT3R_ANC_SRC_MASK 0x0800 /* OUT3R_ANC_SRC */
+#define WM5100_OUT3R_ANC_SRC_SHIFT 11 /* OUT3R_ANC_SRC */
+#define WM5100_OUT3R_ANC_SRC_WIDTH 1 /* OUT3R_ANC_SRC */
+#define WM5100_OUT3R_PGA_VOL_MASK 0x00FE /* OUT3R_PGA_VOL - [7:1] */
+#define WM5100_OUT3R_PGA_VOL_SHIFT 1 /* OUT3R_PGA_VOL - [7:1] */
+#define WM5100_OUT3R_PGA_VOL_WIDTH 7 /* OUT3R_PGA_VOL - [7:1] */
+
+/*
+ * R1050 (0x41A) - DAC Volume Limit 3L
+ */
+#define WM5100_OUT3L_VOL_LIM_MASK 0x00FF /* OUT3L_VOL_LIM - [7:0] */
+#define WM5100_OUT3L_VOL_LIM_SHIFT 0 /* OUT3L_VOL_LIM - [7:0] */
+#define WM5100_OUT3L_VOL_LIM_WIDTH 8 /* OUT3L_VOL_LIM - [7:0] */
+
+/*
+ * R1051 (0x41B) - DAC Volume Limit 3R
+ */
+#define WM5100_OUT3R_VOL_LIM_MASK 0x00FF /* OUT3R_VOL_LIM - [7:0] */
+#define WM5100_OUT3R_VOL_LIM_SHIFT 0 /* OUT3R_VOL_LIM - [7:0] */
+#define WM5100_OUT3R_VOL_LIM_WIDTH 8 /* OUT3R_VOL_LIM - [7:0] */
+
+/*
+ * R1052 (0x41C) - Out Volume 4L
+ */
+#define WM5100_OUT4_OSR 0x2000 /* OUT4_OSR */
+#define WM5100_OUT4_OSR_MASK 0x2000 /* OUT4_OSR */
+#define WM5100_OUT4_OSR_SHIFT 13 /* OUT4_OSR */
+#define WM5100_OUT4_OSR_WIDTH 1 /* OUT4_OSR */
+#define WM5100_OUT4L_ANC_SRC 0x0800 /* OUT4L_ANC_SRC */
+#define WM5100_OUT4L_ANC_SRC_MASK 0x0800 /* OUT4L_ANC_SRC */
+#define WM5100_OUT4L_ANC_SRC_SHIFT 11 /* OUT4L_ANC_SRC */
+#define WM5100_OUT4L_ANC_SRC_WIDTH 1 /* OUT4L_ANC_SRC */
+#define WM5100_OUT4L_VOL_LIM_MASK 0x00FF /* OUT4L_VOL_LIM - [7:0] */
+#define WM5100_OUT4L_VOL_LIM_SHIFT 0 /* OUT4L_VOL_LIM - [7:0] */
+#define WM5100_OUT4L_VOL_LIM_WIDTH 8 /* OUT4L_VOL_LIM - [7:0] */
+
+/*
+ * R1053 (0x41D) - Out Volume 4R
+ */
+#define WM5100_OUT4R_ANC_SRC 0x0800 /* OUT4R_ANC_SRC */
+#define WM5100_OUT4R_ANC_SRC_MASK 0x0800 /* OUT4R_ANC_SRC */
+#define WM5100_OUT4R_ANC_SRC_SHIFT 11 /* OUT4R_ANC_SRC */
+#define WM5100_OUT4R_ANC_SRC_WIDTH 1 /* OUT4R_ANC_SRC */
+#define WM5100_OUT4R_VOL_LIM_MASK 0x00FF /* OUT4R_VOL_LIM - [7:0] */
+#define WM5100_OUT4R_VOL_LIM_SHIFT 0 /* OUT4R_VOL_LIM - [7:0] */
+#define WM5100_OUT4R_VOL_LIM_WIDTH 8 /* OUT4R_VOL_LIM - [7:0] */
+
+/*
+ * R1054 (0x41E) - DAC Volume Limit 5L
+ */
+#define WM5100_OUT5_OSR 0x2000 /* OUT5_OSR */
+#define WM5100_OUT5_OSR_MASK 0x2000 /* OUT5_OSR */
+#define WM5100_OUT5_OSR_SHIFT 13 /* OUT5_OSR */
+#define WM5100_OUT5_OSR_WIDTH 1 /* OUT5_OSR */
+#define WM5100_OUT5L_ANC_SRC 0x0800 /* OUT5L_ANC_SRC */
+#define WM5100_OUT5L_ANC_SRC_MASK 0x0800 /* OUT5L_ANC_SRC */
+#define WM5100_OUT5L_ANC_SRC_SHIFT 11 /* OUT5L_ANC_SRC */
+#define WM5100_OUT5L_ANC_SRC_WIDTH 1 /* OUT5L_ANC_SRC */
+#define WM5100_OUT5L_VOL_LIM_MASK 0x00FF /* OUT5L_VOL_LIM - [7:0] */
+#define WM5100_OUT5L_VOL_LIM_SHIFT 0 /* OUT5L_VOL_LIM - [7:0] */
+#define WM5100_OUT5L_VOL_LIM_WIDTH 8 /* OUT5L_VOL_LIM - [7:0] */
+
+/*
+ * R1055 (0x41F) - DAC Volume Limit 5R
+ */
+#define WM5100_OUT5R_ANC_SRC 0x0800 /* OUT5R_ANC_SRC */
+#define WM5100_OUT5R_ANC_SRC_MASK 0x0800 /* OUT5R_ANC_SRC */
+#define WM5100_OUT5R_ANC_SRC_SHIFT 11 /* OUT5R_ANC_SRC */
+#define WM5100_OUT5R_ANC_SRC_WIDTH 1 /* OUT5R_ANC_SRC */
+#define WM5100_OUT5R_VOL_LIM_MASK 0x00FF /* OUT5R_VOL_LIM - [7:0] */
+#define WM5100_OUT5R_VOL_LIM_SHIFT 0 /* OUT5R_VOL_LIM - [7:0] */
+#define WM5100_OUT5R_VOL_LIM_WIDTH 8 /* OUT5R_VOL_LIM - [7:0] */
+
+/*
+ * R1056 (0x420) - DAC Volume Limit 6L
+ */
+#define WM5100_OUT6_OSR 0x2000 /* OUT6_OSR */
+#define WM5100_OUT6_OSR_MASK 0x2000 /* OUT6_OSR */
+#define WM5100_OUT6_OSR_SHIFT 13 /* OUT6_OSR */
+#define WM5100_OUT6_OSR_WIDTH 1 /* OUT6_OSR */
+#define WM5100_OUT6L_ANC_SRC 0x0800 /* OUT6L_ANC_SRC */
+#define WM5100_OUT6L_ANC_SRC_MASK 0x0800 /* OUT6L_ANC_SRC */
+#define WM5100_OUT6L_ANC_SRC_SHIFT 11 /* OUT6L_ANC_SRC */
+#define WM5100_OUT6L_ANC_SRC_WIDTH 1 /* OUT6L_ANC_SRC */
+#define WM5100_OUT6L_VOL_LIM_MASK 0x00FF /* OUT6L_VOL_LIM - [7:0] */
+#define WM5100_OUT6L_VOL_LIM_SHIFT 0 /* OUT6L_VOL_LIM - [7:0] */
+#define WM5100_OUT6L_VOL_LIM_WIDTH 8 /* OUT6L_VOL_LIM - [7:0] */
+
+/*
+ * R1057 (0x421) - DAC Volume Limit 6R
+ */
+#define WM5100_OUT6R_ANC_SRC 0x0800 /* OUT6R_ANC_SRC */
+#define WM5100_OUT6R_ANC_SRC_MASK 0x0800 /* OUT6R_ANC_SRC */
+#define WM5100_OUT6R_ANC_SRC_SHIFT 11 /* OUT6R_ANC_SRC */
+#define WM5100_OUT6R_ANC_SRC_WIDTH 1 /* OUT6R_ANC_SRC */
+#define WM5100_OUT6R_VOL_LIM_MASK 0x00FF /* OUT6R_VOL_LIM - [7:0] */
+#define WM5100_OUT6R_VOL_LIM_SHIFT 0 /* OUT6R_VOL_LIM - [7:0] */
+#define WM5100_OUT6R_VOL_LIM_WIDTH 8 /* OUT6R_VOL_LIM - [7:0] */
+
+/*
+ * R1088 (0x440) - DAC AEC Control 1
+ */
+#define WM5100_AEC_LOOPBACK_SRC_MASK 0x003C /* AEC_LOOPBACK_SRC - [5:2] */
+#define WM5100_AEC_LOOPBACK_SRC_SHIFT 2 /* AEC_LOOPBACK_SRC - [5:2] */
+#define WM5100_AEC_LOOPBACK_SRC_WIDTH 4 /* AEC_LOOPBACK_SRC - [5:2] */
+#define WM5100_AEC_ENA_STS 0x0002 /* AEC_ENA_STS */
+#define WM5100_AEC_ENA_STS_MASK 0x0002 /* AEC_ENA_STS */
+#define WM5100_AEC_ENA_STS_SHIFT 1 /* AEC_ENA_STS */
+#define WM5100_AEC_ENA_STS_WIDTH 1 /* AEC_ENA_STS */
+#define WM5100_AEC_LOOPBACK_ENA 0x0001 /* AEC_LOOPBACK_ENA */
+#define WM5100_AEC_LOOPBACK_ENA_MASK 0x0001 /* AEC_LOOPBACK_ENA */
+#define WM5100_AEC_LOOPBACK_ENA_SHIFT 0 /* AEC_LOOPBACK_ENA */
+#define WM5100_AEC_LOOPBACK_ENA_WIDTH 1 /* AEC_LOOPBACK_ENA */
+
+/*
+ * R1089 (0x441) - Output Volume Ramp
+ */
+#define WM5100_OUT_VD_RAMP_MASK 0x0070 /* OUT_VD_RAMP - [6:4] */
+#define WM5100_OUT_VD_RAMP_SHIFT 4 /* OUT_VD_RAMP - [6:4] */
+#define WM5100_OUT_VD_RAMP_WIDTH 3 /* OUT_VD_RAMP - [6:4] */
+#define WM5100_OUT_VI_RAMP_MASK 0x0007 /* OUT_VI_RAMP - [2:0] */
+#define WM5100_OUT_VI_RAMP_SHIFT 0 /* OUT_VI_RAMP - [2:0] */
+#define WM5100_OUT_VI_RAMP_WIDTH 3 /* OUT_VI_RAMP - [2:0] */
+
+/*
+ * R1152 (0x480) - DAC Digital Volume 1L
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT1L_MUTE 0x0100 /* OUT1L_MUTE */
+#define WM5100_OUT1L_MUTE_MASK 0x0100 /* OUT1L_MUTE */
+#define WM5100_OUT1L_MUTE_SHIFT 8 /* OUT1L_MUTE */
+#define WM5100_OUT1L_MUTE_WIDTH 1 /* OUT1L_MUTE */
+#define WM5100_OUT1L_VOL_MASK 0x00FF /* OUT1L_VOL - [7:0] */
+#define WM5100_OUT1L_VOL_SHIFT 0 /* OUT1L_VOL - [7:0] */
+#define WM5100_OUT1L_VOL_WIDTH 8 /* OUT1L_VOL - [7:0] */
+
+/*
+ * R1153 (0x481) - DAC Digital Volume 1R
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT1R_MUTE 0x0100 /* OUT1R_MUTE */
+#define WM5100_OUT1R_MUTE_MASK 0x0100 /* OUT1R_MUTE */
+#define WM5100_OUT1R_MUTE_SHIFT 8 /* OUT1R_MUTE */
+#define WM5100_OUT1R_MUTE_WIDTH 1 /* OUT1R_MUTE */
+#define WM5100_OUT1R_VOL_MASK 0x00FF /* OUT1R_VOL - [7:0] */
+#define WM5100_OUT1R_VOL_SHIFT 0 /* OUT1R_VOL - [7:0] */
+#define WM5100_OUT1R_VOL_WIDTH 8 /* OUT1R_VOL - [7:0] */
+
+/*
+ * R1154 (0x482) - DAC Digital Volume 2L
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT2L_MUTE 0x0100 /* OUT2L_MUTE */
+#define WM5100_OUT2L_MUTE_MASK 0x0100 /* OUT2L_MUTE */
+#define WM5100_OUT2L_MUTE_SHIFT 8 /* OUT2L_MUTE */
+#define WM5100_OUT2L_MUTE_WIDTH 1 /* OUT2L_MUTE */
+#define WM5100_OUT2L_VOL_MASK 0x00FF /* OUT2L_VOL - [7:0] */
+#define WM5100_OUT2L_VOL_SHIFT 0 /* OUT2L_VOL - [7:0] */
+#define WM5100_OUT2L_VOL_WIDTH 8 /* OUT2L_VOL - [7:0] */
+
+/*
+ * R1155 (0x483) - DAC Digital Volume 2R
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT2R_MUTE 0x0100 /* OUT2R_MUTE */
+#define WM5100_OUT2R_MUTE_MASK 0x0100 /* OUT2R_MUTE */
+#define WM5100_OUT2R_MUTE_SHIFT 8 /* OUT2R_MUTE */
+#define WM5100_OUT2R_MUTE_WIDTH 1 /* OUT2R_MUTE */
+#define WM5100_OUT2R_VOL_MASK 0x00FF /* OUT2R_VOL - [7:0] */
+#define WM5100_OUT2R_VOL_SHIFT 0 /* OUT2R_VOL - [7:0] */
+#define WM5100_OUT2R_VOL_WIDTH 8 /* OUT2R_VOL - [7:0] */
+
+/*
+ * R1156 (0x484) - DAC Digital Volume 3L
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT3L_MUTE 0x0100 /* OUT3L_MUTE */
+#define WM5100_OUT3L_MUTE_MASK 0x0100 /* OUT3L_MUTE */
+#define WM5100_OUT3L_MUTE_SHIFT 8 /* OUT3L_MUTE */
+#define WM5100_OUT3L_MUTE_WIDTH 1 /* OUT3L_MUTE */
+#define WM5100_OUT3L_VOL_MASK 0x00FF /* OUT3L_VOL - [7:0] */
+#define WM5100_OUT3L_VOL_SHIFT 0 /* OUT3L_VOL - [7:0] */
+#define WM5100_OUT3L_VOL_WIDTH 8 /* OUT3L_VOL - [7:0] */
+
+/*
+ * R1157 (0x485) - DAC Digital Volume 3R
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT3R_MUTE 0x0100 /* OUT3R_MUTE */
+#define WM5100_OUT3R_MUTE_MASK 0x0100 /* OUT3R_MUTE */
+#define WM5100_OUT3R_MUTE_SHIFT 8 /* OUT3R_MUTE */
+#define WM5100_OUT3R_MUTE_WIDTH 1 /* OUT3R_MUTE */
+#define WM5100_OUT3R_VOL_MASK 0x00FF /* OUT3R_VOL - [7:0] */
+#define WM5100_OUT3R_VOL_SHIFT 0 /* OUT3R_VOL - [7:0] */
+#define WM5100_OUT3R_VOL_WIDTH 8 /* OUT3R_VOL - [7:0] */
+
+/*
+ * R1158 (0x486) - DAC Digital Volume 4L
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT4L_MUTE 0x0100 /* OUT4L_MUTE */
+#define WM5100_OUT4L_MUTE_MASK 0x0100 /* OUT4L_MUTE */
+#define WM5100_OUT4L_MUTE_SHIFT 8 /* OUT4L_MUTE */
+#define WM5100_OUT4L_MUTE_WIDTH 1 /* OUT4L_MUTE */
+#define WM5100_OUT4L_VOL_MASK 0x00FF /* OUT4L_VOL - [7:0] */
+#define WM5100_OUT4L_VOL_SHIFT 0 /* OUT4L_VOL - [7:0] */
+#define WM5100_OUT4L_VOL_WIDTH 8 /* OUT4L_VOL - [7:0] */
+
+/*
+ * R1159 (0x487) - DAC Digital Volume 4R
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT4R_MUTE 0x0100 /* OUT4R_MUTE */
+#define WM5100_OUT4R_MUTE_MASK 0x0100 /* OUT4R_MUTE */
+#define WM5100_OUT4R_MUTE_SHIFT 8 /* OUT4R_MUTE */
+#define WM5100_OUT4R_MUTE_WIDTH 1 /* OUT4R_MUTE */
+#define WM5100_OUT4R_VOL_MASK 0x00FF /* OUT4R_VOL - [7:0] */
+#define WM5100_OUT4R_VOL_SHIFT 0 /* OUT4R_VOL - [7:0] */
+#define WM5100_OUT4R_VOL_WIDTH 8 /* OUT4R_VOL - [7:0] */
+
+/*
+ * R1160 (0x488) - DAC Digital Volume 5L
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT5L_MUTE 0x0100 /* OUT5L_MUTE */
+#define WM5100_OUT5L_MUTE_MASK 0x0100 /* OUT5L_MUTE */
+#define WM5100_OUT5L_MUTE_SHIFT 8 /* OUT5L_MUTE */
+#define WM5100_OUT5L_MUTE_WIDTH 1 /* OUT5L_MUTE */
+#define WM5100_OUT5L_VOL_MASK 0x00FF /* OUT5L_VOL - [7:0] */
+#define WM5100_OUT5L_VOL_SHIFT 0 /* OUT5L_VOL - [7:0] */
+#define WM5100_OUT5L_VOL_WIDTH 8 /* OUT5L_VOL - [7:0] */
+
+/*
+ * R1161 (0x489) - DAC Digital Volume 5R
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT5R_MUTE 0x0100 /* OUT5R_MUTE */
+#define WM5100_OUT5R_MUTE_MASK 0x0100 /* OUT5R_MUTE */
+#define WM5100_OUT5R_MUTE_SHIFT 8 /* OUT5R_MUTE */
+#define WM5100_OUT5R_MUTE_WIDTH 1 /* OUT5R_MUTE */
+#define WM5100_OUT5R_VOL_MASK 0x00FF /* OUT5R_VOL - [7:0] */
+#define WM5100_OUT5R_VOL_SHIFT 0 /* OUT5R_VOL - [7:0] */
+#define WM5100_OUT5R_VOL_WIDTH 8 /* OUT5R_VOL - [7:0] */
+
+/*
+ * R1162 (0x48A) - DAC Digital Volume 6L
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT6L_MUTE 0x0100 /* OUT6L_MUTE */
+#define WM5100_OUT6L_MUTE_MASK 0x0100 /* OUT6L_MUTE */
+#define WM5100_OUT6L_MUTE_SHIFT 8 /* OUT6L_MUTE */
+#define WM5100_OUT6L_MUTE_WIDTH 1 /* OUT6L_MUTE */
+#define WM5100_OUT6L_VOL_MASK 0x00FF /* OUT6L_VOL - [7:0] */
+#define WM5100_OUT6L_VOL_SHIFT 0 /* OUT6L_VOL - [7:0] */
+#define WM5100_OUT6L_VOL_WIDTH 8 /* OUT6L_VOL - [7:0] */
+
+/*
+ * R1163 (0x48B) - DAC Digital Volume 6R
+ */
+#define WM5100_OUT_VU 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_MASK 0x0200 /* OUT_VU */
+#define WM5100_OUT_VU_SHIFT 9 /* OUT_VU */
+#define WM5100_OUT_VU_WIDTH 1 /* OUT_VU */
+#define WM5100_OUT6R_MUTE 0x0100 /* OUT6R_MUTE */
+#define WM5100_OUT6R_MUTE_MASK 0x0100 /* OUT6R_MUTE */
+#define WM5100_OUT6R_MUTE_SHIFT 8 /* OUT6R_MUTE */
+#define WM5100_OUT6R_MUTE_WIDTH 1 /* OUT6R_MUTE */
+#define WM5100_OUT6R_VOL_MASK 0x00FF /* OUT6R_VOL - [7:0] */
+#define WM5100_OUT6R_VOL_SHIFT 0 /* OUT6R_VOL - [7:0] */
+#define WM5100_OUT6R_VOL_WIDTH 8 /* OUT6R_VOL - [7:0] */
+
+/*
+ * R1216 (0x4C0) - PDM SPK1 CTRL 1
+ */
+#define WM5100_SPK1R_MUTE 0x2000 /* SPK1R_MUTE */
+#define WM5100_SPK1R_MUTE_MASK 0x2000 /* SPK1R_MUTE */
+#define WM5100_SPK1R_MUTE_SHIFT 13 /* SPK1R_MUTE */
+#define WM5100_SPK1R_MUTE_WIDTH 1 /* SPK1R_MUTE */
+#define WM5100_SPK1L_MUTE 0x1000 /* SPK1L_MUTE */
+#define WM5100_SPK1L_MUTE_MASK 0x1000 /* SPK1L_MUTE */
+#define WM5100_SPK1L_MUTE_SHIFT 12 /* SPK1L_MUTE */
+#define WM5100_SPK1L_MUTE_WIDTH 1 /* SPK1L_MUTE */
+#define WM5100_SPK1_MUTE_ENDIAN 0x0100 /* SPK1_MUTE_ENDIAN */
+#define WM5100_SPK1_MUTE_ENDIAN_MASK 0x0100 /* SPK1_MUTE_ENDIAN */
+#define WM5100_SPK1_MUTE_ENDIAN_SHIFT 8 /* SPK1_MUTE_ENDIAN */
+#define WM5100_SPK1_MUTE_ENDIAN_WIDTH 1 /* SPK1_MUTE_ENDIAN */
+#define WM5100_SPK1_MUTE_SEQ1_MASK 0x00FF /* SPK1_MUTE_SEQ1 - [7:0] */
+#define WM5100_SPK1_MUTE_SEQ1_SHIFT 0 /* SPK1_MUTE_SEQ1 - [7:0] */
+#define WM5100_SPK1_MUTE_SEQ1_WIDTH 8 /* SPK1_MUTE_SEQ1 - [7:0] */
+
+/*
+ * R1217 (0x4C1) - PDM SPK1 CTRL 2
+ */
+#define WM5100_SPK1_FMT 0x0001 /* SPK1_FMT */
+#define WM5100_SPK1_FMT_MASK 0x0001 /* SPK1_FMT */
+#define WM5100_SPK1_FMT_SHIFT 0 /* SPK1_FMT */
+#define WM5100_SPK1_FMT_WIDTH 1 /* SPK1_FMT */
+
+/*
+ * R1218 (0x4C2) - PDM SPK2 CTRL 1
+ */
+#define WM5100_SPK2R_MUTE 0x2000 /* SPK2R_MUTE */
+#define WM5100_SPK2R_MUTE_MASK 0x2000 /* SPK2R_MUTE */
+#define WM5100_SPK2R_MUTE_SHIFT 13 /* SPK2R_MUTE */
+#define WM5100_SPK2R_MUTE_WIDTH 1 /* SPK2R_MUTE */
+#define WM5100_SPK2L_MUTE 0x1000 /* SPK2L_MUTE */
+#define WM5100_SPK2L_MUTE_MASK 0x1000 /* SPK2L_MUTE */
+#define WM5100_SPK2L_MUTE_SHIFT 12 /* SPK2L_MUTE */
+#define WM5100_SPK2L_MUTE_WIDTH 1 /* SPK2L_MUTE */
+#define WM5100_SPK2_MUTE_ENDIAN 0x0100 /* SPK2_MUTE_ENDIAN */
+#define WM5100_SPK2_MUTE_ENDIAN_MASK 0x0100 /* SPK2_MUTE_ENDIAN */
+#define WM5100_SPK2_MUTE_ENDIAN_SHIFT 8 /* SPK2_MUTE_ENDIAN */
+#define WM5100_SPK2_MUTE_ENDIAN_WIDTH 1 /* SPK2_MUTE_ENDIAN */
+#define WM5100_SPK2_MUTE_SEQ1_MASK 0x00FF /* SPK2_MUTE_SEQ1 - [7:0] */
+#define WM5100_SPK2_MUTE_SEQ1_SHIFT 0 /* SPK2_MUTE_SEQ1 - [7:0] */
+#define WM5100_SPK2_MUTE_SEQ1_WIDTH 8 /* SPK2_MUTE_SEQ1 - [7:0] */
+
+/*
+ * R1219 (0x4C3) - PDM SPK2 CTRL 2
+ */
+#define WM5100_SPK2_FMT 0x0001 /* SPK2_FMT */
+#define WM5100_SPK2_FMT_MASK 0x0001 /* SPK2_FMT */
+#define WM5100_SPK2_FMT_SHIFT 0 /* SPK2_FMT */
+#define WM5100_SPK2_FMT_WIDTH 1 /* SPK2_FMT */
+
+/*
+ * R1280 (0x500) - Audio IF 1_1
+ */
+#define WM5100_AIF1_BCLK_INV 0x0080 /* AIF1_BCLK_INV */
+#define WM5100_AIF1_BCLK_INV_MASK 0x0080 /* AIF1_BCLK_INV */
+#define WM5100_AIF1_BCLK_INV_SHIFT 7 /* AIF1_BCLK_INV */
+#define WM5100_AIF1_BCLK_INV_WIDTH 1 /* AIF1_BCLK_INV */
+#define WM5100_AIF1_BCLK_FRC 0x0040 /* AIF1_BCLK_FRC */
+#define WM5100_AIF1_BCLK_FRC_MASK 0x0040 /* AIF1_BCLK_FRC */
+#define WM5100_AIF1_BCLK_FRC_SHIFT 6 /* AIF1_BCLK_FRC */
+#define WM5100_AIF1_BCLK_FRC_WIDTH 1 /* AIF1_BCLK_FRC */
+#define WM5100_AIF1_BCLK_MSTR 0x0020 /* AIF1_BCLK_MSTR */
+#define WM5100_AIF1_BCLK_MSTR_MASK 0x0020 /* AIF1_BCLK_MSTR */
+#define WM5100_AIF1_BCLK_MSTR_SHIFT 5 /* AIF1_BCLK_MSTR */
+#define WM5100_AIF1_BCLK_MSTR_WIDTH 1 /* AIF1_BCLK_MSTR */
+#define WM5100_AIF1_BCLK_FREQ_MASK 0x001F /* AIF1_BCLK_FREQ - [4:0] */
+#define WM5100_AIF1_BCLK_FREQ_SHIFT 0 /* AIF1_BCLK_FREQ - [4:0] */
+#define WM5100_AIF1_BCLK_FREQ_WIDTH 5 /* AIF1_BCLK_FREQ - [4:0] */
+
+/*
+ * R1281 (0x501) - Audio IF 1_2
+ */
+#define WM5100_AIF1TX_DAT_TRI 0x0020 /* AIF1TX_DAT_TRI */
+#define WM5100_AIF1TX_DAT_TRI_MASK 0x0020 /* AIF1TX_DAT_TRI */
+#define WM5100_AIF1TX_DAT_TRI_SHIFT 5 /* AIF1TX_DAT_TRI */
+#define WM5100_AIF1TX_DAT_TRI_WIDTH 1 /* AIF1TX_DAT_TRI */
+#define WM5100_AIF1TX_LRCLK_SRC 0x0008 /* AIF1TX_LRCLK_SRC */
+#define WM5100_AIF1TX_LRCLK_SRC_MASK 0x0008 /* AIF1TX_LRCLK_SRC */
+#define WM5100_AIF1TX_LRCLK_SRC_SHIFT 3 /* AIF1TX_LRCLK_SRC */
+#define WM5100_AIF1TX_LRCLK_SRC_WIDTH 1 /* AIF1TX_LRCLK_SRC */
+#define WM5100_AIF1TX_LRCLK_INV 0x0004 /* AIF1TX_LRCLK_INV */
+#define WM5100_AIF1TX_LRCLK_INV_MASK 0x0004 /* AIF1TX_LRCLK_INV */
+#define WM5100_AIF1TX_LRCLK_INV_SHIFT 2 /* AIF1TX_LRCLK_INV */
+#define WM5100_AIF1TX_LRCLK_INV_WIDTH 1 /* AIF1TX_LRCLK_INV */
+#define WM5100_AIF1TX_LRCLK_FRC 0x0002 /* AIF1TX_LRCLK_FRC */
+#define WM5100_AIF1TX_LRCLK_FRC_MASK 0x0002 /* AIF1TX_LRCLK_FRC */
+#define WM5100_AIF1TX_LRCLK_FRC_SHIFT 1 /* AIF1TX_LRCLK_FRC */
+#define WM5100_AIF1TX_LRCLK_FRC_WIDTH 1 /* AIF1TX_LRCLK_FRC */
+#define WM5100_AIF1TX_LRCLK_MSTR 0x0001 /* AIF1TX_LRCLK_MSTR */
+#define WM5100_AIF1TX_LRCLK_MSTR_MASK 0x0001 /* AIF1TX_LRCLK_MSTR */
+#define WM5100_AIF1TX_LRCLK_MSTR_SHIFT 0 /* AIF1TX_LRCLK_MSTR */
+#define WM5100_AIF1TX_LRCLK_MSTR_WIDTH 1 /* AIF1TX_LRCLK_MSTR */
+
+/*
+ * R1282 (0x502) - Audio IF 1_3
+ */
+#define WM5100_AIF1RX_LRCLK_INV 0x0004 /* AIF1RX_LRCLK_INV */
+#define WM5100_AIF1RX_LRCLK_INV_MASK 0x0004 /* AIF1RX_LRCLK_INV */
+#define WM5100_AIF1RX_LRCLK_INV_SHIFT 2 /* AIF1RX_LRCLK_INV */
+#define WM5100_AIF1RX_LRCLK_INV_WIDTH 1 /* AIF1RX_LRCLK_INV */
+#define WM5100_AIF1RX_LRCLK_FRC 0x0002 /* AIF1RX_LRCLK_FRC */
+#define WM5100_AIF1RX_LRCLK_FRC_MASK 0x0002 /* AIF1RX_LRCLK_FRC */
+#define WM5100_AIF1RX_LRCLK_FRC_SHIFT 1 /* AIF1RX_LRCLK_FRC */
+#define WM5100_AIF1RX_LRCLK_FRC_WIDTH 1 /* AIF1RX_LRCLK_FRC */
+#define WM5100_AIF1RX_LRCLK_MSTR 0x0001 /* AIF1RX_LRCLK_MSTR */
+#define WM5100_AIF1RX_LRCLK_MSTR_MASK 0x0001 /* AIF1RX_LRCLK_MSTR */
+#define WM5100_AIF1RX_LRCLK_MSTR_SHIFT 0 /* AIF1RX_LRCLK_MSTR */
+#define WM5100_AIF1RX_LRCLK_MSTR_WIDTH 1 /* AIF1RX_LRCLK_MSTR */
+
+/*
+ * R1283 (0x503) - Audio IF 1_4
+ */
+#define WM5100_AIF1_TRI 0x0040 /* AIF1_TRI */
+#define WM5100_AIF1_TRI_MASK 0x0040 /* AIF1_TRI */
+#define WM5100_AIF1_TRI_SHIFT 6 /* AIF1_TRI */
+#define WM5100_AIF1_TRI_WIDTH 1 /* AIF1_TRI */
+#define WM5100_AIF1_RATE_MASK 0x0003 /* AIF1_RATE - [1:0] */
+#define WM5100_AIF1_RATE_SHIFT 0 /* AIF1_RATE - [1:0] */
+#define WM5100_AIF1_RATE_WIDTH 2 /* AIF1_RATE - [1:0] */
+
+/*
+ * R1284 (0x504) - Audio IF 1_5
+ */
+#define WM5100_AIF1_FMT_MASK 0x0007 /* AIF1_FMT - [2:0] */
+#define WM5100_AIF1_FMT_SHIFT 0 /* AIF1_FMT - [2:0] */
+#define WM5100_AIF1_FMT_WIDTH 3 /* AIF1_FMT - [2:0] */
+
+/*
+ * R1285 (0x505) - Audio IF 1_6
+ */
+#define WM5100_AIF1TX_BCPF_MASK 0x1FFF /* AIF1TX_BCPF - [12:0] */
+#define WM5100_AIF1TX_BCPF_SHIFT 0 /* AIF1TX_BCPF - [12:0] */
+#define WM5100_AIF1TX_BCPF_WIDTH 13 /* AIF1TX_BCPF - [12:0] */
+
+/*
+ * R1286 (0x506) - Audio IF 1_7
+ */
+#define WM5100_AIF1RX_BCPF_MASK 0x1FFF /* AIF1RX_BCPF - [12:0] */
+#define WM5100_AIF1RX_BCPF_SHIFT 0 /* AIF1RX_BCPF - [12:0] */
+#define WM5100_AIF1RX_BCPF_WIDTH 13 /* AIF1RX_BCPF - [12:0] */
+
+/*
+ * R1287 (0x507) - Audio IF 1_8
+ */
+#define WM5100_AIF1TX_WL_MASK 0x3F00 /* AIF1TX_WL - [13:8] */
+#define WM5100_AIF1TX_WL_SHIFT 8 /* AIF1TX_WL - [13:8] */
+#define WM5100_AIF1TX_WL_WIDTH 6 /* AIF1TX_WL - [13:8] */
+#define WM5100_AIF1TX_SLOT_LEN_MASK 0x00FF /* AIF1TX_SLOT_LEN - [7:0] */
+#define WM5100_AIF1TX_SLOT_LEN_SHIFT 0 /* AIF1TX_SLOT_LEN - [7:0] */
+#define WM5100_AIF1TX_SLOT_LEN_WIDTH 8 /* AIF1TX_SLOT_LEN - [7:0] */
+
+/*
+ * R1288 (0x508) - Audio IF 1_9
+ */
+#define WM5100_AIF1RX_WL_MASK 0x3F00 /* AIF1RX_WL - [13:8] */
+#define WM5100_AIF1RX_WL_SHIFT 8 /* AIF1RX_WL - [13:8] */
+#define WM5100_AIF1RX_WL_WIDTH 6 /* AIF1RX_WL - [13:8] */
+#define WM5100_AIF1RX_SLOT_LEN_MASK 0x00FF /* AIF1RX_SLOT_LEN - [7:0] */
+#define WM5100_AIF1RX_SLOT_LEN_SHIFT 0 /* AIF1RX_SLOT_LEN - [7:0] */
+#define WM5100_AIF1RX_SLOT_LEN_WIDTH 8 /* AIF1RX_SLOT_LEN - [7:0] */
+
+/*
+ * R1289 (0x509) - Audio IF 1_10
+ */
+#define WM5100_AIF1TX1_SLOT_MASK 0x003F /* AIF1TX1_SLOT - [5:0] */
+#define WM5100_AIF1TX1_SLOT_SHIFT 0 /* AIF1TX1_SLOT - [5:0] */
+#define WM5100_AIF1TX1_SLOT_WIDTH 6 /* AIF1TX1_SLOT - [5:0] */
+
+/*
+ * R1290 (0x50A) - Audio IF 1_11
+ */
+#define WM5100_AIF1TX2_SLOT_MASK 0x003F /* AIF1TX2_SLOT - [5:0] */
+#define WM5100_AIF1TX2_SLOT_SHIFT 0 /* AIF1TX2_SLOT - [5:0] */
+#define WM5100_AIF1TX2_SLOT_WIDTH 6 /* AIF1TX2_SLOT - [5:0] */
+
+/*
+ * R1291 (0x50B) - Audio IF 1_12
+ */
+#define WM5100_AIF1TX3_SLOT_MASK 0x003F /* AIF1TX3_SLOT - [5:0] */
+#define WM5100_AIF1TX3_SLOT_SHIFT 0 /* AIF1TX3_SLOT - [5:0] */
+#define WM5100_AIF1TX3_SLOT_WIDTH 6 /* AIF1TX3_SLOT - [5:0] */
+
+/*
+ * R1292 (0x50C) - Audio IF 1_13
+ */
+#define WM5100_AIF1TX4_SLOT_MASK 0x003F /* AIF1TX4_SLOT - [5:0] */
+#define WM5100_AIF1TX4_SLOT_SHIFT 0 /* AIF1TX4_SLOT - [5:0] */
+#define WM5100_AIF1TX4_SLOT_WIDTH 6 /* AIF1TX4_SLOT - [5:0] */
+
+/*
+ * R1293 (0x50D) - Audio IF 1_14
+ */
+#define WM5100_AIF1TX5_SLOT_MASK 0x003F /* AIF1TX5_SLOT - [5:0] */
+#define WM5100_AIF1TX5_SLOT_SHIFT 0 /* AIF1TX5_SLOT - [5:0] */
+#define WM5100_AIF1TX5_SLOT_WIDTH 6 /* AIF1TX5_SLOT - [5:0] */
+
+/*
+ * R1294 (0x50E) - Audio IF 1_15
+ */
+#define WM5100_AIF1TX6_SLOT_MASK 0x003F /* AIF1TX6_SLOT - [5:0] */
+#define WM5100_AIF1TX6_SLOT_SHIFT 0 /* AIF1TX6_SLOT - [5:0] */
+#define WM5100_AIF1TX6_SLOT_WIDTH 6 /* AIF1TX6_SLOT - [5:0] */
+
+/*
+ * R1295 (0x50F) - Audio IF 1_16
+ */
+#define WM5100_AIF1TX7_SLOT_MASK 0x003F /* AIF1TX7_SLOT - [5:0] */
+#define WM5100_AIF1TX7_SLOT_SHIFT 0 /* AIF1TX7_SLOT - [5:0] */
+#define WM5100_AIF1TX7_SLOT_WIDTH 6 /* AIF1TX7_SLOT - [5:0] */
+
+/*
+ * R1296 (0x510) - Audio IF 1_17
+ */
+#define WM5100_AIF1TX8_SLOT_MASK 0x003F /* AIF1TX8_SLOT - [5:0] */
+#define WM5100_AIF1TX8_SLOT_SHIFT 0 /* AIF1TX8_SLOT - [5:0] */
+#define WM5100_AIF1TX8_SLOT_WIDTH 6 /* AIF1TX8_SLOT - [5:0] */
+
+/*
+ * R1297 (0x511) - Audio IF 1_18
+ */
+#define WM5100_AIF1RX1_SLOT_MASK 0x003F /* AIF1RX1_SLOT - [5:0] */
+#define WM5100_AIF1RX1_SLOT_SHIFT 0 /* AIF1RX1_SLOT - [5:0] */
+#define WM5100_AIF1RX1_SLOT_WIDTH 6 /* AIF1RX1_SLOT - [5:0] */
+
+/*
+ * R1298 (0x512) - Audio IF 1_19
+ */
+#define WM5100_AIF1RX2_SLOT_MASK 0x003F /* AIF1RX2_SLOT - [5:0] */
+#define WM5100_AIF1RX2_SLOT_SHIFT 0 /* AIF1RX2_SLOT - [5:0] */
+#define WM5100_AIF1RX2_SLOT_WIDTH 6 /* AIF1RX2_SLOT - [5:0] */
+
+/*
+ * R1299 (0x513) - Audio IF 1_20
+ */
+#define WM5100_AIF1RX3_SLOT_MASK 0x003F /* AIF1RX3_SLOT - [5:0] */
+#define WM5100_AIF1RX3_SLOT_SHIFT 0 /* AIF1RX3_SLOT - [5:0] */
+#define WM5100_AIF1RX3_SLOT_WIDTH 6 /* AIF1RX3_SLOT - [5:0] */
+
+/*
+ * R1300 (0x514) - Audio IF 1_21
+ */
+#define WM5100_AIF1RX4_SLOT_MASK 0x003F /* AIF1RX4_SLOT - [5:0] */
+#define WM5100_AIF1RX4_SLOT_SHIFT 0 /* AIF1RX4_SLOT - [5:0] */
+#define WM5100_AIF1RX4_SLOT_WIDTH 6 /* AIF1RX4_SLOT - [5:0] */
+
+/*
+ * R1301 (0x515) - Audio IF 1_22
+ */
+#define WM5100_AIF1RX5_SLOT_MASK 0x003F /* AIF1RX5_SLOT - [5:0] */
+#define WM5100_AIF1RX5_SLOT_SHIFT 0 /* AIF1RX5_SLOT - [5:0] */
+#define WM5100_AIF1RX5_SLOT_WIDTH 6 /* AIF1RX5_SLOT - [5:0] */
+
+/*
+ * R1302 (0x516) - Audio IF 1_23
+ */
+#define WM5100_AIF1RX6_SLOT_MASK 0x003F /* AIF1RX6_SLOT - [5:0] */
+#define WM5100_AIF1RX6_SLOT_SHIFT 0 /* AIF1RX6_SLOT - [5:0] */
+#define WM5100_AIF1RX6_SLOT_WIDTH 6 /* AIF1RX6_SLOT - [5:0] */
+
+/*
+ * R1303 (0x517) - Audio IF 1_24
+ */
+#define WM5100_AIF1RX7_SLOT_MASK 0x003F /* AIF1RX7_SLOT - [5:0] */
+#define WM5100_AIF1RX7_SLOT_SHIFT 0 /* AIF1RX7_SLOT - [5:0] */
+#define WM5100_AIF1RX7_SLOT_WIDTH 6 /* AIF1RX7_SLOT - [5:0] */
+
+/*
+ * R1304 (0x518) - Audio IF 1_25
+ */
+#define WM5100_AIF1RX8_SLOT_MASK 0x003F /* AIF1RX8_SLOT - [5:0] */
+#define WM5100_AIF1RX8_SLOT_SHIFT 0 /* AIF1RX8_SLOT - [5:0] */
+#define WM5100_AIF1RX8_SLOT_WIDTH 6 /* AIF1RX8_SLOT - [5:0] */
+
+/*
+ * R1305 (0x519) - Audio IF 1_26
+ */
+#define WM5100_AIF1TX8_ENA 0x0080 /* AIF1TX8_ENA */
+#define WM5100_AIF1TX8_ENA_MASK 0x0080 /* AIF1TX8_ENA */
+#define WM5100_AIF1TX8_ENA_SHIFT 7 /* AIF1TX8_ENA */
+#define WM5100_AIF1TX8_ENA_WIDTH 1 /* AIF1TX8_ENA */
+#define WM5100_AIF1TX7_ENA 0x0040 /* AIF1TX7_ENA */
+#define WM5100_AIF1TX7_ENA_MASK 0x0040 /* AIF1TX7_ENA */
+#define WM5100_AIF1TX7_ENA_SHIFT 6 /* AIF1TX7_ENA */
+#define WM5100_AIF1TX7_ENA_WIDTH 1 /* AIF1TX7_ENA */
+#define WM5100_AIF1TX6_ENA 0x0020 /* AIF1TX6_ENA */
+#define WM5100_AIF1TX6_ENA_MASK 0x0020 /* AIF1TX6_ENA */
+#define WM5100_AIF1TX6_ENA_SHIFT 5 /* AIF1TX6_ENA */
+#define WM5100_AIF1TX6_ENA_WIDTH 1 /* AIF1TX6_ENA */
+#define WM5100_AIF1TX5_ENA 0x0010 /* AIF1TX5_ENA */
+#define WM5100_AIF1TX5_ENA_MASK 0x0010 /* AIF1TX5_ENA */
+#define WM5100_AIF1TX5_ENA_SHIFT 4 /* AIF1TX5_ENA */
+#define WM5100_AIF1TX5_ENA_WIDTH 1 /* AIF1TX5_ENA */
+#define WM5100_AIF1TX4_ENA 0x0008 /* AIF1TX4_ENA */
+#define WM5100_AIF1TX4_ENA_MASK 0x0008 /* AIF1TX4_ENA */
+#define WM5100_AIF1TX4_ENA_SHIFT 3 /* AIF1TX4_ENA */
+#define WM5100_AIF1TX4_ENA_WIDTH 1 /* AIF1TX4_ENA */
+#define WM5100_AIF1TX3_ENA 0x0004 /* AIF1TX3_ENA */
+#define WM5100_AIF1TX3_ENA_MASK 0x0004 /* AIF1TX3_ENA */
+#define WM5100_AIF1TX3_ENA_SHIFT 2 /* AIF1TX3_ENA */
+#define WM5100_AIF1TX3_ENA_WIDTH 1 /* AIF1TX3_ENA */
+#define WM5100_AIF1TX2_ENA 0x0002 /* AIF1TX2_ENA */
+#define WM5100_AIF1TX2_ENA_MASK 0x0002 /* AIF1TX2_ENA */
+#define WM5100_AIF1TX2_ENA_SHIFT 1 /* AIF1TX2_ENA */
+#define WM5100_AIF1TX2_ENA_WIDTH 1 /* AIF1TX2_ENA */
+#define WM5100_AIF1TX1_ENA 0x0001 /* AIF1TX1_ENA */
+#define WM5100_AIF1TX1_ENA_MASK 0x0001 /* AIF1TX1_ENA */
+#define WM5100_AIF1TX1_ENA_SHIFT 0 /* AIF1TX1_ENA */
+#define WM5100_AIF1TX1_ENA_WIDTH 1 /* AIF1TX1_ENA */
+
+/*
+ * R1306 (0x51A) - Audio IF 1_27
+ */
+#define WM5100_AIF1RX8_ENA 0x0080 /* AIF1RX8_ENA */
+#define WM5100_AIF1RX8_ENA_MASK 0x0080 /* AIF1RX8_ENA */
+#define WM5100_AIF1RX8_ENA_SHIFT 7 /* AIF1RX8_ENA */
+#define WM5100_AIF1RX8_ENA_WIDTH 1 /* AIF1RX8_ENA */
+#define WM5100_AIF1RX7_ENA 0x0040 /* AIF1RX7_ENA */
+#define WM5100_AIF1RX7_ENA_MASK 0x0040 /* AIF1RX7_ENA */
+#define WM5100_AIF1RX7_ENA_SHIFT 6 /* AIF1RX7_ENA */
+#define WM5100_AIF1RX7_ENA_WIDTH 1 /* AIF1RX7_ENA */
+#define WM5100_AIF1RX6_ENA 0x0020 /* AIF1RX6_ENA */
+#define WM5100_AIF1RX6_ENA_MASK 0x0020 /* AIF1RX6_ENA */
+#define WM5100_AIF1RX6_ENA_SHIFT 5 /* AIF1RX6_ENA */
+#define WM5100_AIF1RX6_ENA_WIDTH 1 /* AIF1RX6_ENA */
+#define WM5100_AIF1RX5_ENA 0x0010 /* AIF1RX5_ENA */
+#define WM5100_AIF1RX5_ENA_MASK 0x0010 /* AIF1RX5_ENA */
+#define WM5100_AIF1RX5_ENA_SHIFT 4 /* AIF1RX5_ENA */
+#define WM5100_AIF1RX5_ENA_WIDTH 1 /* AIF1RX5_ENA */
+#define WM5100_AIF1RX4_ENA 0x0008 /* AIF1RX4_ENA */
+#define WM5100_AIF1RX4_ENA_MASK 0x0008 /* AIF1RX4_ENA */
+#define WM5100_AIF1RX4_ENA_SHIFT 3 /* AIF1RX4_ENA */
+#define WM5100_AIF1RX4_ENA_WIDTH 1 /* AIF1RX4_ENA */
+#define WM5100_AIF1RX3_ENA 0x0004 /* AIF1RX3_ENA */
+#define WM5100_AIF1RX3_ENA_MASK 0x0004 /* AIF1RX3_ENA */
+#define WM5100_AIF1RX3_ENA_SHIFT 2 /* AIF1RX3_ENA */
+#define WM5100_AIF1RX3_ENA_WIDTH 1 /* AIF1RX3_ENA */
+#define WM5100_AIF1RX2_ENA 0x0002 /* AIF1RX2_ENA */
+#define WM5100_AIF1RX2_ENA_MASK 0x0002 /* AIF1RX2_ENA */
+#define WM5100_AIF1RX2_ENA_SHIFT 1 /* AIF1RX2_ENA */
+#define WM5100_AIF1RX2_ENA_WIDTH 1 /* AIF1RX2_ENA */
+#define WM5100_AIF1RX1_ENA 0x0001 /* AIF1RX1_ENA */
+#define WM5100_AIF1RX1_ENA_MASK 0x0001 /* AIF1RX1_ENA */
+#define WM5100_AIF1RX1_ENA_SHIFT 0 /* AIF1RX1_ENA */
+#define WM5100_AIF1RX1_ENA_WIDTH 1 /* AIF1RX1_ENA */
+
+/*
+ * R1344 (0x540) - Audio IF 2_1
+ */
+#define WM5100_AIF2_BCLK_INV 0x0080 /* AIF2_BCLK_INV */
+#define WM5100_AIF2_BCLK_INV_MASK 0x0080 /* AIF2_BCLK_INV */
+#define WM5100_AIF2_BCLK_INV_SHIFT 7 /* AIF2_BCLK_INV */
+#define WM5100_AIF2_BCLK_INV_WIDTH 1 /* AIF2_BCLK_INV */
+#define WM5100_AIF2_BCLK_FRC 0x0040 /* AIF2_BCLK_FRC */
+#define WM5100_AIF2_BCLK_FRC_MASK 0x0040 /* AIF2_BCLK_FRC */
+#define WM5100_AIF2_BCLK_FRC_SHIFT 6 /* AIF2_BCLK_FRC */
+#define WM5100_AIF2_BCLK_FRC_WIDTH 1 /* AIF2_BCLK_FRC */
+#define WM5100_AIF2_BCLK_MSTR 0x0020 /* AIF2_BCLK_MSTR */
+#define WM5100_AIF2_BCLK_MSTR_MASK 0x0020 /* AIF2_BCLK_MSTR */
+#define WM5100_AIF2_BCLK_MSTR_SHIFT 5 /* AIF2_BCLK_MSTR */
+#define WM5100_AIF2_BCLK_MSTR_WIDTH 1 /* AIF2_BCLK_MSTR */
+#define WM5100_AIF2_BCLK_FREQ_MASK 0x001F /* AIF2_BCLK_FREQ - [4:0] */
+#define WM5100_AIF2_BCLK_FREQ_SHIFT 0 /* AIF2_BCLK_FREQ - [4:0] */
+#define WM5100_AIF2_BCLK_FREQ_WIDTH 5 /* AIF2_BCLK_FREQ - [4:0] */
+
+/*
+ * R1345 (0x541) - Audio IF 2_2
+ */
+#define WM5100_AIF2TX_DAT_TRI 0x0020 /* AIF2TX_DAT_TRI */
+#define WM5100_AIF2TX_DAT_TRI_MASK 0x0020 /* AIF2TX_DAT_TRI */
+#define WM5100_AIF2TX_DAT_TRI_SHIFT 5 /* AIF2TX_DAT_TRI */
+#define WM5100_AIF2TX_DAT_TRI_WIDTH 1 /* AIF2TX_DAT_TRI */
+#define WM5100_AIF2TX_LRCLK_SRC 0x0008 /* AIF2TX_LRCLK_SRC */
+#define WM5100_AIF2TX_LRCLK_SRC_MASK 0x0008 /* AIF2TX_LRCLK_SRC */
+#define WM5100_AIF2TX_LRCLK_SRC_SHIFT 3 /* AIF2TX_LRCLK_SRC */
+#define WM5100_AIF2TX_LRCLK_SRC_WIDTH 1 /* AIF2TX_LRCLK_SRC */
+#define WM5100_AIF2TX_LRCLK_INV 0x0004 /* AIF2TX_LRCLK_INV */
+#define WM5100_AIF2TX_LRCLK_INV_MASK 0x0004 /* AIF2TX_LRCLK_INV */
+#define WM5100_AIF2TX_LRCLK_INV_SHIFT 2 /* AIF2TX_LRCLK_INV */
+#define WM5100_AIF2TX_LRCLK_INV_WIDTH 1 /* AIF2TX_LRCLK_INV */
+#define WM5100_AIF2TX_LRCLK_FRC 0x0002 /* AIF2TX_LRCLK_FRC */
+#define WM5100_AIF2TX_LRCLK_FRC_MASK 0x0002 /* AIF2TX_LRCLK_FRC */
+#define WM5100_AIF2TX_LRCLK_FRC_SHIFT 1 /* AIF2TX_LRCLK_FRC */
+#define WM5100_AIF2TX_LRCLK_FRC_WIDTH 1 /* AIF2TX_LRCLK_FRC */
+#define WM5100_AIF2TX_LRCLK_MSTR 0x0001 /* AIF2TX_LRCLK_MSTR */
+#define WM5100_AIF2TX_LRCLK_MSTR_MASK 0x0001 /* AIF2TX_LRCLK_MSTR */
+#define WM5100_AIF2TX_LRCLK_MSTR_SHIFT 0 /* AIF2TX_LRCLK_MSTR */
+#define WM5100_AIF2TX_LRCLK_MSTR_WIDTH 1 /* AIF2TX_LRCLK_MSTR */
+
+/*
+ * R1346 (0x542) - Audio IF 2_3
+ */
+#define WM5100_AIF2RX_LRCLK_INV 0x0004 /* AIF2RX_LRCLK_INV */
+#define WM5100_AIF2RX_LRCLK_INV_MASK 0x0004 /* AIF2RX_LRCLK_INV */
+#define WM5100_AIF2RX_LRCLK_INV_SHIFT 2 /* AIF2RX_LRCLK_INV */
+#define WM5100_AIF2RX_LRCLK_INV_WIDTH 1 /* AIF2RX_LRCLK_INV */
+#define WM5100_AIF2RX_LRCLK_FRC 0x0002 /* AIF2RX_LRCLK_FRC */
+#define WM5100_AIF2RX_LRCLK_FRC_MASK 0x0002 /* AIF2RX_LRCLK_FRC */
+#define WM5100_AIF2RX_LRCLK_FRC_SHIFT 1 /* AIF2RX_LRCLK_FRC */
+#define WM5100_AIF2RX_LRCLK_FRC_WIDTH 1 /* AIF2RX_LRCLK_FRC */
+#define WM5100_AIF2RX_LRCLK_MSTR 0x0001 /* AIF2RX_LRCLK_MSTR */
+#define WM5100_AIF2RX_LRCLK_MSTR_MASK 0x0001 /* AIF2RX_LRCLK_MSTR */
+#define WM5100_AIF2RX_LRCLK_MSTR_SHIFT 0 /* AIF2RX_LRCLK_MSTR */
+#define WM5100_AIF2RX_LRCLK_MSTR_WIDTH 1 /* AIF2RX_LRCLK_MSTR */
+
+/*
+ * R1347 (0x543) - Audio IF 2_4
+ */
+#define WM5100_AIF2_TRI 0x0040 /* AIF2_TRI */
+#define WM5100_AIF2_TRI_MASK 0x0040 /* AIF2_TRI */
+#define WM5100_AIF2_TRI_SHIFT 6 /* AIF2_TRI */
+#define WM5100_AIF2_TRI_WIDTH 1 /* AIF2_TRI */
+#define WM5100_AIF2_RATE_MASK 0x0003 /* AIF2_RATE - [1:0] */
+#define WM5100_AIF2_RATE_SHIFT 0 /* AIF2_RATE - [1:0] */
+#define WM5100_AIF2_RATE_WIDTH 2 /* AIF2_RATE - [1:0] */
+
+/*
+ * R1348 (0x544) - Audio IF 2_5
+ */
+#define WM5100_AIF2_FMT_MASK 0x0007 /* AIF2_FMT - [2:0] */
+#define WM5100_AIF2_FMT_SHIFT 0 /* AIF2_FMT - [2:0] */
+#define WM5100_AIF2_FMT_WIDTH 3 /* AIF2_FMT - [2:0] */
+
+/*
+ * R1349 (0x545) - Audio IF 2_6
+ */
+#define WM5100_AIF2TX_BCPF_MASK 0x1FFF /* AIF2TX_BCPF - [12:0] */
+#define WM5100_AIF2TX_BCPF_SHIFT 0 /* AIF2TX_BCPF - [12:0] */
+#define WM5100_AIF2TX_BCPF_WIDTH 13 /* AIF2TX_BCPF - [12:0] */
+
+/*
+ * R1350 (0x546) - Audio IF 2_7
+ */
+#define WM5100_AIF2RX_BCPF_MASK 0x1FFF /* AIF2RX_BCPF - [12:0] */
+#define WM5100_AIF2RX_BCPF_SHIFT 0 /* AIF2RX_BCPF - [12:0] */
+#define WM5100_AIF2RX_BCPF_WIDTH 13 /* AIF2RX_BCPF - [12:0] */
+
+/*
+ * R1351 (0x547) - Audio IF 2_8
+ */
+#define WM5100_AIF2TX_WL_MASK 0x3F00 /* AIF2TX_WL - [13:8] */
+#define WM5100_AIF2TX_WL_SHIFT 8 /* AIF2TX_WL - [13:8] */
+#define WM5100_AIF2TX_WL_WIDTH 6 /* AIF2TX_WL - [13:8] */
+#define WM5100_AIF2TX_SLOT_LEN_MASK 0x00FF /* AIF2TX_SLOT_LEN - [7:0] */
+#define WM5100_AIF2TX_SLOT_LEN_SHIFT 0 /* AIF2TX_SLOT_LEN - [7:0] */
+#define WM5100_AIF2TX_SLOT_LEN_WIDTH 8 /* AIF2TX_SLOT_LEN - [7:0] */
+
+/*
+ * R1352 (0x548) - Audio IF 2_9
+ */
+#define WM5100_AIF2RX_WL_MASK 0x3F00 /* AIF2RX_WL - [13:8] */
+#define WM5100_AIF2RX_WL_SHIFT 8 /* AIF2RX_WL - [13:8] */
+#define WM5100_AIF2RX_WL_WIDTH 6 /* AIF2RX_WL - [13:8] */
+#define WM5100_AIF2RX_SLOT_LEN_MASK 0x00FF /* AIF2RX_SLOT_LEN - [7:0] */
+#define WM5100_AIF2RX_SLOT_LEN_SHIFT 0 /* AIF2RX_SLOT_LEN - [7:0] */
+#define WM5100_AIF2RX_SLOT_LEN_WIDTH 8 /* AIF2RX_SLOT_LEN - [7:0] */
+
+/*
+ * R1353 (0x549) - Audio IF 2_10
+ */
+#define WM5100_AIF2TX1_SLOT_MASK 0x003F /* AIF2TX1_SLOT - [5:0] */
+#define WM5100_AIF2TX1_SLOT_SHIFT 0 /* AIF2TX1_SLOT - [5:0] */
+#define WM5100_AIF2TX1_SLOT_WIDTH 6 /* AIF2TX1_SLOT - [5:0] */
+
+/*
+ * R1354 (0x54A) - Audio IF 2_11
+ */
+#define WM5100_AIF2TX2_SLOT_MASK 0x003F /* AIF2TX2_SLOT - [5:0] */
+#define WM5100_AIF2TX2_SLOT_SHIFT 0 /* AIF2TX2_SLOT - [5:0] */
+#define WM5100_AIF2TX2_SLOT_WIDTH 6 /* AIF2TX2_SLOT - [5:0] */
+
+/*
+ * R1361 (0x551) - Audio IF 2_18
+ */
+#define WM5100_AIF2RX1_SLOT_MASK 0x003F /* AIF2RX1_SLOT - [5:0] */
+#define WM5100_AIF2RX1_SLOT_SHIFT 0 /* AIF2RX1_SLOT - [5:0] */
+#define WM5100_AIF2RX1_SLOT_WIDTH 6 /* AIF2RX1_SLOT - [5:0] */
+
+/*
+ * R1362 (0x552) - Audio IF 2_19
+ */
+#define WM5100_AIF2RX2_SLOT_MASK 0x003F /* AIF2RX2_SLOT - [5:0] */
+#define WM5100_AIF2RX2_SLOT_SHIFT 0 /* AIF2RX2_SLOT - [5:0] */
+#define WM5100_AIF2RX2_SLOT_WIDTH 6 /* AIF2RX2_SLOT - [5:0] */
+
+/*
+ * R1369 (0x559) - Audio IF 2_26
+ */
+#define WM5100_AIF2TX2_ENA 0x0002 /* AIF2TX2_ENA */
+#define WM5100_AIF2TX2_ENA_MASK 0x0002 /* AIF2TX2_ENA */
+#define WM5100_AIF2TX2_ENA_SHIFT 1 /* AIF2TX2_ENA */
+#define WM5100_AIF2TX2_ENA_WIDTH 1 /* AIF2TX2_ENA */
+#define WM5100_AIF2TX1_ENA 0x0001 /* AIF2TX1_ENA */
+#define WM5100_AIF2TX1_ENA_MASK 0x0001 /* AIF2TX1_ENA */
+#define WM5100_AIF2TX1_ENA_SHIFT 0 /* AIF2TX1_ENA */
+#define WM5100_AIF2TX1_ENA_WIDTH 1 /* AIF2TX1_ENA */
+
+/*
+ * R1370 (0x55A) - Audio IF 2_27
+ */
+#define WM5100_AIF2RX2_ENA 0x0002 /* AIF2RX2_ENA */
+#define WM5100_AIF2RX2_ENA_MASK 0x0002 /* AIF2RX2_ENA */
+#define WM5100_AIF2RX2_ENA_SHIFT 1 /* AIF2RX2_ENA */
+#define WM5100_AIF2RX2_ENA_WIDTH 1 /* AIF2RX2_ENA */
+#define WM5100_AIF2RX1_ENA 0x0001 /* AIF2RX1_ENA */
+#define WM5100_AIF2RX1_ENA_MASK 0x0001 /* AIF2RX1_ENA */
+#define WM5100_AIF2RX1_ENA_SHIFT 0 /* AIF2RX1_ENA */
+#define WM5100_AIF2RX1_ENA_WIDTH 1 /* AIF2RX1_ENA */
+
+/*
+ * R1408 (0x580) - Audio IF 3_1
+ */
+#define WM5100_AIF3_BCLK_INV 0x0080 /* AIF3_BCLK_INV */
+#define WM5100_AIF3_BCLK_INV_MASK 0x0080 /* AIF3_BCLK_INV */
+#define WM5100_AIF3_BCLK_INV_SHIFT 7 /* AIF3_BCLK_INV */
+#define WM5100_AIF3_BCLK_INV_WIDTH 1 /* AIF3_BCLK_INV */
+#define WM5100_AIF3_BCLK_FRC 0x0040 /* AIF3_BCLK_FRC */
+#define WM5100_AIF3_BCLK_FRC_MASK 0x0040 /* AIF3_BCLK_FRC */
+#define WM5100_AIF3_BCLK_FRC_SHIFT 6 /* AIF3_BCLK_FRC */
+#define WM5100_AIF3_BCLK_FRC_WIDTH 1 /* AIF3_BCLK_FRC */
+#define WM5100_AIF3_BCLK_MSTR 0x0020 /* AIF3_BCLK_MSTR */
+#define WM5100_AIF3_BCLK_MSTR_MASK 0x0020 /* AIF3_BCLK_MSTR */
+#define WM5100_AIF3_BCLK_MSTR_SHIFT 5 /* AIF3_BCLK_MSTR */
+#define WM5100_AIF3_BCLK_MSTR_WIDTH 1 /* AIF3_BCLK_MSTR */
+#define WM5100_AIF3_BCLK_FREQ_MASK 0x001F /* AIF3_BCLK_FREQ - [4:0] */
+#define WM5100_AIF3_BCLK_FREQ_SHIFT 0 /* AIF3_BCLK_FREQ - [4:0] */
+#define WM5100_AIF3_BCLK_FREQ_WIDTH 5 /* AIF3_BCLK_FREQ - [4:0] */
+
+/*
+ * R1409 (0x581) - Audio IF 3_2
+ */
+#define WM5100_AIF3TX_DAT_TRI 0x0020 /* AIF3TX_DAT_TRI */
+#define WM5100_AIF3TX_DAT_TRI_MASK 0x0020 /* AIF3TX_DAT_TRI */
+#define WM5100_AIF3TX_DAT_TRI_SHIFT 5 /* AIF3TX_DAT_TRI */
+#define WM5100_AIF3TX_DAT_TRI_WIDTH 1 /* AIF3TX_DAT_TRI */
+#define WM5100_AIF3TX_LRCLK_SRC 0x0008 /* AIF3TX_LRCLK_SRC */
+#define WM5100_AIF3TX_LRCLK_SRC_MASK 0x0008 /* AIF3TX_LRCLK_SRC */
+#define WM5100_AIF3TX_LRCLK_SRC_SHIFT 3 /* AIF3TX_LRCLK_SRC */
+#define WM5100_AIF3TX_LRCLK_SRC_WIDTH 1 /* AIF3TX_LRCLK_SRC */
+#define WM5100_AIF3TX_LRCLK_INV 0x0004 /* AIF3TX_LRCLK_INV */
+#define WM5100_AIF3TX_LRCLK_INV_MASK 0x0004 /* AIF3TX_LRCLK_INV */
+#define WM5100_AIF3TX_LRCLK_INV_SHIFT 2 /* AIF3TX_LRCLK_INV */
+#define WM5100_AIF3TX_LRCLK_INV_WIDTH 1 /* AIF3TX_LRCLK_INV */
+#define WM5100_AIF3TX_LRCLK_FRC 0x0002 /* AIF3TX_LRCLK_FRC */
+#define WM5100_AIF3TX_LRCLK_FRC_MASK 0x0002 /* AIF3TX_LRCLK_FRC */
+#define WM5100_AIF3TX_LRCLK_FRC_SHIFT 1 /* AIF3TX_LRCLK_FRC */
+#define WM5100_AIF3TX_LRCLK_FRC_WIDTH 1 /* AIF3TX_LRCLK_FRC */
+#define WM5100_AIF3TX_LRCLK_MSTR 0x0001 /* AIF3TX_LRCLK_MSTR */
+#define WM5100_AIF3TX_LRCLK_MSTR_MASK 0x0001 /* AIF3TX_LRCLK_MSTR */
+#define WM5100_AIF3TX_LRCLK_MSTR_SHIFT 0 /* AIF3TX_LRCLK_MSTR */
+#define WM5100_AIF3TX_LRCLK_MSTR_WIDTH 1 /* AIF3TX_LRCLK_MSTR */
+
+/*
+ * R1410 (0x582) - Audio IF 3_3
+ */
+#define WM5100_AIF3RX_LRCLK_INV 0x0004 /* AIF3RX_LRCLK_INV */
+#define WM5100_AIF3RX_LRCLK_INV_MASK 0x0004 /* AIF3RX_LRCLK_INV */
+#define WM5100_AIF3RX_LRCLK_INV_SHIFT 2 /* AIF3RX_LRCLK_INV */
+#define WM5100_AIF3RX_LRCLK_INV_WIDTH 1 /* AIF3RX_LRCLK_INV */
+#define WM5100_AIF3RX_LRCLK_FRC 0x0002 /* AIF3RX_LRCLK_FRC */
+#define WM5100_AIF3RX_LRCLK_FRC_MASK 0x0002 /* AIF3RX_LRCLK_FRC */
+#define WM5100_AIF3RX_LRCLK_FRC_SHIFT 1 /* AIF3RX_LRCLK_FRC */
+#define WM5100_AIF3RX_LRCLK_FRC_WIDTH 1 /* AIF3RX_LRCLK_FRC */
+#define WM5100_AIF3RX_LRCLK_MSTR 0x0001 /* AIF3RX_LRCLK_MSTR */
+#define WM5100_AIF3RX_LRCLK_MSTR_MASK 0x0001 /* AIF3RX_LRCLK_MSTR */
+#define WM5100_AIF3RX_LRCLK_MSTR_SHIFT 0 /* AIF3RX_LRCLK_MSTR */
+#define WM5100_AIF3RX_LRCLK_MSTR_WIDTH 1 /* AIF3RX_LRCLK_MSTR */
+
+/*
+ * R1411 (0x583) - Audio IF 3_4
+ */
+#define WM5100_AIF3_TRI 0x0040 /* AIF3_TRI */
+#define WM5100_AIF3_TRI_MASK 0x0040 /* AIF3_TRI */
+#define WM5100_AIF3_TRI_SHIFT 6 /* AIF3_TRI */
+#define WM5100_AIF3_TRI_WIDTH 1 /* AIF3_TRI */
+#define WM5100_AIF3_RATE_MASK 0x0003 /* AIF3_RATE - [1:0] */
+#define WM5100_AIF3_RATE_SHIFT 0 /* AIF3_RATE - [1:0] */
+#define WM5100_AIF3_RATE_WIDTH 2 /* AIF3_RATE - [1:0] */
+
+/*
+ * R1412 (0x584) - Audio IF 3_5
+ */
+#define WM5100_AIF3_FMT_MASK 0x0007 /* AIF3_FMT - [2:0] */
+#define WM5100_AIF3_FMT_SHIFT 0 /* AIF3_FMT - [2:0] */
+#define WM5100_AIF3_FMT_WIDTH 3 /* AIF3_FMT - [2:0] */
+
+/*
+ * R1413 (0x585) - Audio IF 3_6
+ */
+#define WM5100_AIF3TX_BCPF_MASK 0x1FFF /* AIF3TX_BCPF - [12:0] */
+#define WM5100_AIF3TX_BCPF_SHIFT 0 /* AIF3TX_BCPF - [12:0] */
+#define WM5100_AIF3TX_BCPF_WIDTH 13 /* AIF3TX_BCPF - [12:0] */
+
+/*
+ * R1414 (0x586) - Audio IF 3_7
+ */
+#define WM5100_AIF3RX_BCPF_MASK 0x1FFF /* AIF3RX_BCPF - [12:0] */
+#define WM5100_AIF3RX_BCPF_SHIFT 0 /* AIF3RX_BCPF - [12:0] */
+#define WM5100_AIF3RX_BCPF_WIDTH 13 /* AIF3RX_BCPF - [12:0] */
+
+/*
+ * R1415 (0x587) - Audio IF 3_8
+ */
+#define WM5100_AIF3TX_WL_MASK 0x3F00 /* AIF3TX_WL - [13:8] */
+#define WM5100_AIF3TX_WL_SHIFT 8 /* AIF3TX_WL - [13:8] */
+#define WM5100_AIF3TX_WL_WIDTH 6 /* AIF3TX_WL - [13:8] */
+#define WM5100_AIF3TX_SLOT_LEN_MASK 0x00FF /* AIF3TX_SLOT_LEN - [7:0] */
+#define WM5100_AIF3TX_SLOT_LEN_SHIFT 0 /* AIF3TX_SLOT_LEN - [7:0] */
+#define WM5100_AIF3TX_SLOT_LEN_WIDTH 8 /* AIF3TX_SLOT_LEN - [7:0] */
+
+/*
+ * R1416 (0x588) - Audio IF 3_9
+ */
+#define WM5100_AIF3RX_WL_MASK 0x3F00 /* AIF3RX_WL - [13:8] */
+#define WM5100_AIF3RX_WL_SHIFT 8 /* AIF3RX_WL - [13:8] */
+#define WM5100_AIF3RX_WL_WIDTH 6 /* AIF3RX_WL - [13:8] */
+#define WM5100_AIF3RX_SLOT_LEN_MASK 0x00FF /* AIF3RX_SLOT_LEN - [7:0] */
+#define WM5100_AIF3RX_SLOT_LEN_SHIFT 0 /* AIF3RX_SLOT_LEN - [7:0] */
+#define WM5100_AIF3RX_SLOT_LEN_WIDTH 8 /* AIF3RX_SLOT_LEN - [7:0] */
+
+/*
+ * R1417 (0x589) - Audio IF 3_10
+ */
+#define WM5100_AIF3TX1_SLOT_MASK 0x003F /* AIF3TX1_SLOT - [5:0] */
+#define WM5100_AIF3TX1_SLOT_SHIFT 0 /* AIF3TX1_SLOT - [5:0] */
+#define WM5100_AIF3TX1_SLOT_WIDTH 6 /* AIF3TX1_SLOT - [5:0] */
+
+/*
+ * R1418 (0x58A) - Audio IF 3_11
+ */
+#define WM5100_AIF3TX2_SLOT_MASK 0x003F /* AIF3TX2_SLOT - [5:0] */
+#define WM5100_AIF3TX2_SLOT_SHIFT 0 /* AIF3TX2_SLOT - [5:0] */
+#define WM5100_AIF3TX2_SLOT_WIDTH 6 /* AIF3TX2_SLOT - [5:0] */
+
+/*
+ * R1425 (0x591) - Audio IF 3_18
+ */
+#define WM5100_AIF3RX1_SLOT_MASK 0x003F /* AIF3RX1_SLOT - [5:0] */
+#define WM5100_AIF3RX1_SLOT_SHIFT 0 /* AIF3RX1_SLOT - [5:0] */
+#define WM5100_AIF3RX1_SLOT_WIDTH 6 /* AIF3RX1_SLOT - [5:0] */
+
+/*
+ * R1426 (0x592) - Audio IF 3_19
+ */
+#define WM5100_AIF3RX2_SLOT_MASK 0x003F /* AIF3RX2_SLOT - [5:0] */
+#define WM5100_AIF3RX2_SLOT_SHIFT 0 /* AIF3RX2_SLOT - [5:0] */
+#define WM5100_AIF3RX2_SLOT_WIDTH 6 /* AIF3RX2_SLOT - [5:0] */
+
+/*
+ * R1433 (0x599) - Audio IF 3_26
+ */
+#define WM5100_AIF3TX2_ENA 0x0002 /* AIF3TX2_ENA */
+#define WM5100_AIF3TX2_ENA_MASK 0x0002 /* AIF3TX2_ENA */
+#define WM5100_AIF3TX2_ENA_SHIFT 1 /* AIF3TX2_ENA */
+#define WM5100_AIF3TX2_ENA_WIDTH 1 /* AIF3TX2_ENA */
+#define WM5100_AIF3TX1_ENA 0x0001 /* AIF3TX1_ENA */
+#define WM5100_AIF3TX1_ENA_MASK 0x0001 /* AIF3TX1_ENA */
+#define WM5100_AIF3TX1_ENA_SHIFT 0 /* AIF3TX1_ENA */
+#define WM5100_AIF3TX1_ENA_WIDTH 1 /* AIF3TX1_ENA */
+
+/*
+ * R1434 (0x59A) - Audio IF 3_27
+ */
+#define WM5100_AIF3RX2_ENA 0x0002 /* AIF3RX2_ENA */
+#define WM5100_AIF3RX2_ENA_MASK 0x0002 /* AIF3RX2_ENA */
+#define WM5100_AIF3RX2_ENA_SHIFT 1 /* AIF3RX2_ENA */
+#define WM5100_AIF3RX2_ENA_WIDTH 1 /* AIF3RX2_ENA */
+#define WM5100_AIF3RX1_ENA 0x0001 /* AIF3RX1_ENA */
+#define WM5100_AIF3RX1_ENA_MASK 0x0001 /* AIF3RX1_ENA */
+#define WM5100_AIF3RX1_ENA_SHIFT 0 /* AIF3RX1_ENA */
+#define WM5100_AIF3RX1_ENA_WIDTH 1 /* AIF3RX1_ENA */
+
+#define WM5100_MIXER_VOL_MASK 0x00FE /* MIXER_VOL - [7:1] */
+#define WM5100_MIXER_VOL_SHIFT 1 /* MIXER_VOL - [7:1] */
+#define WM5100_MIXER_VOL_WIDTH 7 /* MIXER_VOL - [7:1] */
+
+/*
+ * R3072 (0xC00) - GPIO CTRL 1
+ */
+#define WM5100_GP1_DIR 0x8000 /* GP1_DIR */
+#define WM5100_GP1_DIR_MASK 0x8000 /* GP1_DIR */
+#define WM5100_GP1_DIR_SHIFT 15 /* GP1_DIR */
+#define WM5100_GP1_DIR_WIDTH 1 /* GP1_DIR */
+#define WM5100_GP1_PU 0x4000 /* GP1_PU */
+#define WM5100_GP1_PU_MASK 0x4000 /* GP1_PU */
+#define WM5100_GP1_PU_SHIFT 14 /* GP1_PU */
+#define WM5100_GP1_PU_WIDTH 1 /* GP1_PU */
+#define WM5100_GP1_PD 0x2000 /* GP1_PD */
+#define WM5100_GP1_PD_MASK 0x2000 /* GP1_PD */
+#define WM5100_GP1_PD_SHIFT 13 /* GP1_PD */
+#define WM5100_GP1_PD_WIDTH 1 /* GP1_PD */
+#define WM5100_GP1_POL 0x0400 /* GP1_POL */
+#define WM5100_GP1_POL_MASK 0x0400 /* GP1_POL */
+#define WM5100_GP1_POL_SHIFT 10 /* GP1_POL */
+#define WM5100_GP1_POL_WIDTH 1 /* GP1_POL */
+#define WM5100_GP1_OP_CFG 0x0200 /* GP1_OP_CFG */
+#define WM5100_GP1_OP_CFG_MASK 0x0200 /* GP1_OP_CFG */
+#define WM5100_GP1_OP_CFG_SHIFT 9 /* GP1_OP_CFG */
+#define WM5100_GP1_OP_CFG_WIDTH 1 /* GP1_OP_CFG */
+#define WM5100_GP1_DB 0x0100 /* GP1_DB */
+#define WM5100_GP1_DB_MASK 0x0100 /* GP1_DB */
+#define WM5100_GP1_DB_SHIFT 8 /* GP1_DB */
+#define WM5100_GP1_DB_WIDTH 1 /* GP1_DB */
+#define WM5100_GP1_LVL 0x0040 /* GP1_LVL */
+#define WM5100_GP1_LVL_MASK 0x0040 /* GP1_LVL */
+#define WM5100_GP1_LVL_SHIFT 6 /* GP1_LVL */
+#define WM5100_GP1_LVL_WIDTH 1 /* GP1_LVL */
+#define WM5100_GP1_FN_MASK 0x003F /* GP1_FN - [5:0] */
+#define WM5100_GP1_FN_SHIFT 0 /* GP1_FN - [5:0] */
+#define WM5100_GP1_FN_WIDTH 6 /* GP1_FN - [5:0] */
+
+/*
+ * R3073 (0xC01) - GPIO CTRL 2
+ */
+#define WM5100_GP2_DIR 0x8000 /* GP2_DIR */
+#define WM5100_GP2_DIR_MASK 0x8000 /* GP2_DIR */
+#define WM5100_GP2_DIR_SHIFT 15 /* GP2_DIR */
+#define WM5100_GP2_DIR_WIDTH 1 /* GP2_DIR */
+#define WM5100_GP2_PU 0x4000 /* GP2_PU */
+#define WM5100_GP2_PU_MASK 0x4000 /* GP2_PU */
+#define WM5100_GP2_PU_SHIFT 14 /* GP2_PU */
+#define WM5100_GP2_PU_WIDTH 1 /* GP2_PU */
+#define WM5100_GP2_PD 0x2000 /* GP2_PD */
+#define WM5100_GP2_PD_MASK 0x2000 /* GP2_PD */
+#define WM5100_GP2_PD_SHIFT 13 /* GP2_PD */
+#define WM5100_GP2_PD_WIDTH 1 /* GP2_PD */
+#define WM5100_GP2_POL 0x0400 /* GP2_POL */
+#define WM5100_GP2_POL_MASK 0x0400 /* GP2_POL */
+#define WM5100_GP2_POL_SHIFT 10 /* GP2_POL */
+#define WM5100_GP2_POL_WIDTH 1 /* GP2_POL */
+#define WM5100_GP2_OP_CFG 0x0200 /* GP2_OP_CFG */
+#define WM5100_GP2_OP_CFG_MASK 0x0200 /* GP2_OP_CFG */
+#define WM5100_GP2_OP_CFG_SHIFT 9 /* GP2_OP_CFG */
+#define WM5100_GP2_OP_CFG_WIDTH 1 /* GP2_OP_CFG */
+#define WM5100_GP2_DB 0x0100 /* GP2_DB */
+#define WM5100_GP2_DB_MASK 0x0100 /* GP2_DB */
+#define WM5100_GP2_DB_SHIFT 8 /* GP2_DB */
+#define WM5100_GP2_DB_WIDTH 1 /* GP2_DB */
+#define WM5100_GP2_LVL 0x0040 /* GP2_LVL */
+#define WM5100_GP2_LVL_MASK 0x0040 /* GP2_LVL */
+#define WM5100_GP2_LVL_SHIFT 6 /* GP2_LVL */
+#define WM5100_GP2_LVL_WIDTH 1 /* GP2_LVL */
+#define WM5100_GP2_FN_MASK 0x003F /* GP2_FN - [5:0] */
+#define WM5100_GP2_FN_SHIFT 0 /* GP2_FN - [5:0] */
+#define WM5100_GP2_FN_WIDTH 6 /* GP2_FN - [5:0] */
+
+/*
+ * R3074 (0xC02) - GPIO CTRL 3
+ */
+#define WM5100_GP3_DIR 0x8000 /* GP3_DIR */
+#define WM5100_GP3_DIR_MASK 0x8000 /* GP3_DIR */
+#define WM5100_GP3_DIR_SHIFT 15 /* GP3_DIR */
+#define WM5100_GP3_DIR_WIDTH 1 /* GP3_DIR */
+#define WM5100_GP3_PU 0x4000 /* GP3_PU */
+#define WM5100_GP3_PU_MASK 0x4000 /* GP3_PU */
+#define WM5100_GP3_PU_SHIFT 14 /* GP3_PU */
+#define WM5100_GP3_PU_WIDTH 1 /* GP3_PU */
+#define WM5100_GP3_PD 0x2000 /* GP3_PD */
+#define WM5100_GP3_PD_MASK 0x2000 /* GP3_PD */
+#define WM5100_GP3_PD_SHIFT 13 /* GP3_PD */
+#define WM5100_GP3_PD_WIDTH 1 /* GP3_PD */
+#define WM5100_GP3_POL 0x0400 /* GP3_POL */
+#define WM5100_GP3_POL_MASK 0x0400 /* GP3_POL */
+#define WM5100_GP3_POL_SHIFT 10 /* GP3_POL */
+#define WM5100_GP3_POL_WIDTH 1 /* GP3_POL */
+#define WM5100_GP3_OP_CFG 0x0200 /* GP3_OP_CFG */
+#define WM5100_GP3_OP_CFG_MASK 0x0200 /* GP3_OP_CFG */
+#define WM5100_GP3_OP_CFG_SHIFT 9 /* GP3_OP_CFG */
+#define WM5100_GP3_OP_CFG_WIDTH 1 /* GP3_OP_CFG */
+#define WM5100_GP3_DB 0x0100 /* GP3_DB */
+#define WM5100_GP3_DB_MASK 0x0100 /* GP3_DB */
+#define WM5100_GP3_DB_SHIFT 8 /* GP3_DB */
+#define WM5100_GP3_DB_WIDTH 1 /* GP3_DB */
+#define WM5100_GP3_LVL 0x0040 /* GP3_LVL */
+#define WM5100_GP3_LVL_MASK 0x0040 /* GP3_LVL */
+#define WM5100_GP3_LVL_SHIFT 6 /* GP3_LVL */
+#define WM5100_GP3_LVL_WIDTH 1 /* GP3_LVL */
+#define WM5100_GP3_FN_MASK 0x003F /* GP3_FN - [5:0] */
+#define WM5100_GP3_FN_SHIFT 0 /* GP3_FN - [5:0] */
+#define WM5100_GP3_FN_WIDTH 6 /* GP3_FN - [5:0] */
+
+/*
+ * R3075 (0xC03) - GPIO CTRL 4
+ */
+#define WM5100_GP4_DIR 0x8000 /* GP4_DIR */
+#define WM5100_GP4_DIR_MASK 0x8000 /* GP4_DIR */
+#define WM5100_GP4_DIR_SHIFT 15 /* GP4_DIR */
+#define WM5100_GP4_DIR_WIDTH 1 /* GP4_DIR */
+#define WM5100_GP4_PU 0x4000 /* GP4_PU */
+#define WM5100_GP4_PU_MASK 0x4000 /* GP4_PU */
+#define WM5100_GP4_PU_SHIFT 14 /* GP4_PU */
+#define WM5100_GP4_PU_WIDTH 1 /* GP4_PU */
+#define WM5100_GP4_PD 0x2000 /* GP4_PD */
+#define WM5100_GP4_PD_MASK 0x2000 /* GP4_PD */
+#define WM5100_GP4_PD_SHIFT 13 /* GP4_PD */
+#define WM5100_GP4_PD_WIDTH 1 /* GP4_PD */
+#define WM5100_GP4_POL 0x0400 /* GP4_POL */
+#define WM5100_GP4_POL_MASK 0x0400 /* GP4_POL */
+#define WM5100_GP4_POL_SHIFT 10 /* GP4_POL */
+#define WM5100_GP4_POL_WIDTH 1 /* GP4_POL */
+#define WM5100_GP4_OP_CFG 0x0200 /* GP4_OP_CFG */
+#define WM5100_GP4_OP_CFG_MASK 0x0200 /* GP4_OP_CFG */
+#define WM5100_GP4_OP_CFG_SHIFT 9 /* GP4_OP_CFG */
+#define WM5100_GP4_OP_CFG_WIDTH 1 /* GP4_OP_CFG */
+#define WM5100_GP4_DB 0x0100 /* GP4_DB */
+#define WM5100_GP4_DB_MASK 0x0100 /* GP4_DB */
+#define WM5100_GP4_DB_SHIFT 8 /* GP4_DB */
+#define WM5100_GP4_DB_WIDTH 1 /* GP4_DB */
+#define WM5100_GP4_LVL 0x0040 /* GP4_LVL */
+#define WM5100_GP4_LVL_MASK 0x0040 /* GP4_LVL */
+#define WM5100_GP4_LVL_SHIFT 6 /* GP4_LVL */
+#define WM5100_GP4_LVL_WIDTH 1 /* GP4_LVL */
+#define WM5100_GP4_FN_MASK 0x003F /* GP4_FN - [5:0] */
+#define WM5100_GP4_FN_SHIFT 0 /* GP4_FN - [5:0] */
+#define WM5100_GP4_FN_WIDTH 6 /* GP4_FN - [5:0] */
+
+/*
+ * R3076 (0xC04) - GPIO CTRL 5
+ */
+#define WM5100_GP5_DIR 0x8000 /* GP5_DIR */
+#define WM5100_GP5_DIR_MASK 0x8000 /* GP5_DIR */
+#define WM5100_GP5_DIR_SHIFT 15 /* GP5_DIR */
+#define WM5100_GP5_DIR_WIDTH 1 /* GP5_DIR */
+#define WM5100_GP5_PU 0x4000 /* GP5_PU */
+#define WM5100_GP5_PU_MASK 0x4000 /* GP5_PU */
+#define WM5100_GP5_PU_SHIFT 14 /* GP5_PU */
+#define WM5100_GP5_PU_WIDTH 1 /* GP5_PU */
+#define WM5100_GP5_PD 0x2000 /* GP5_PD */
+#define WM5100_GP5_PD_MASK 0x2000 /* GP5_PD */
+#define WM5100_GP5_PD_SHIFT 13 /* GP5_PD */
+#define WM5100_GP5_PD_WIDTH 1 /* GP5_PD */
+#define WM5100_GP5_POL 0x0400 /* GP5_POL */
+#define WM5100_GP5_POL_MASK 0x0400 /* GP5_POL */
+#define WM5100_GP5_POL_SHIFT 10 /* GP5_POL */
+#define WM5100_GP5_POL_WIDTH 1 /* GP5_POL */
+#define WM5100_GP5_OP_CFG 0x0200 /* GP5_OP_CFG */
+#define WM5100_GP5_OP_CFG_MASK 0x0200 /* GP5_OP_CFG */
+#define WM5100_GP5_OP_CFG_SHIFT 9 /* GP5_OP_CFG */
+#define WM5100_GP5_OP_CFG_WIDTH 1 /* GP5_OP_CFG */
+#define WM5100_GP5_DB 0x0100 /* GP5_DB */
+#define WM5100_GP5_DB_MASK 0x0100 /* GP5_DB */
+#define WM5100_GP5_DB_SHIFT 8 /* GP5_DB */
+#define WM5100_GP5_DB_WIDTH 1 /* GP5_DB */
+#define WM5100_GP5_LVL 0x0040 /* GP5_LVL */
+#define WM5100_GP5_LVL_MASK 0x0040 /* GP5_LVL */
+#define WM5100_GP5_LVL_SHIFT 6 /* GP5_LVL */
+#define WM5100_GP5_LVL_WIDTH 1 /* GP5_LVL */
+#define WM5100_GP5_FN_MASK 0x003F /* GP5_FN - [5:0] */
+#define WM5100_GP5_FN_SHIFT 0 /* GP5_FN - [5:0] */
+#define WM5100_GP5_FN_WIDTH 6 /* GP5_FN - [5:0] */
+
+/*
+ * R3077 (0xC05) - GPIO CTRL 6
+ */
+#define WM5100_GP6_DIR 0x8000 /* GP6_DIR */
+#define WM5100_GP6_DIR_MASK 0x8000 /* GP6_DIR */
+#define WM5100_GP6_DIR_SHIFT 15 /* GP6_DIR */
+#define WM5100_GP6_DIR_WIDTH 1 /* GP6_DIR */
+#define WM5100_GP6_PU 0x4000 /* GP6_PU */
+#define WM5100_GP6_PU_MASK 0x4000 /* GP6_PU */
+#define WM5100_GP6_PU_SHIFT 14 /* GP6_PU */
+#define WM5100_GP6_PU_WIDTH 1 /* GP6_PU */
+#define WM5100_GP6_PD 0x2000 /* GP6_PD */
+#define WM5100_GP6_PD_MASK 0x2000 /* GP6_PD */
+#define WM5100_GP6_PD_SHIFT 13 /* GP6_PD */
+#define WM5100_GP6_PD_WIDTH 1 /* GP6_PD */
+#define WM5100_GP6_POL 0x0400 /* GP6_POL */
+#define WM5100_GP6_POL_MASK 0x0400 /* GP6_POL */
+#define WM5100_GP6_POL_SHIFT 10 /* GP6_POL */
+#define WM5100_GP6_POL_WIDTH 1 /* GP6_POL */
+#define WM5100_GP6_OP_CFG 0x0200 /* GP6_OP_CFG */
+#define WM5100_GP6_OP_CFG_MASK 0x0200 /* GP6_OP_CFG */
+#define WM5100_GP6_OP_CFG_SHIFT 9 /* GP6_OP_CFG */
+#define WM5100_GP6_OP_CFG_WIDTH 1 /* GP6_OP_CFG */
+#define WM5100_GP6_DB 0x0100 /* GP6_DB */
+#define WM5100_GP6_DB_MASK 0x0100 /* GP6_DB */
+#define WM5100_GP6_DB_SHIFT 8 /* GP6_DB */
+#define WM5100_GP6_DB_WIDTH 1 /* GP6_DB */
+#define WM5100_GP6_LVL 0x0040 /* GP6_LVL */
+#define WM5100_GP6_LVL_MASK 0x0040 /* GP6_LVL */
+#define WM5100_GP6_LVL_SHIFT 6 /* GP6_LVL */
+#define WM5100_GP6_LVL_WIDTH 1 /* GP6_LVL */
+#define WM5100_GP6_FN_MASK 0x003F /* GP6_FN - [5:0] */
+#define WM5100_GP6_FN_SHIFT 0 /* GP6_FN - [5:0] */
+#define WM5100_GP6_FN_WIDTH 6 /* GP6_FN - [5:0] */
+
+/*
+ * R3107 (0xC23) - Misc Pad Ctrl 1
+ */
+#define WM5100_LDO1ENA_PD 0x8000 /* LDO1ENA_PD */
+#define WM5100_LDO1ENA_PD_MASK 0x8000 /* LDO1ENA_PD */
+#define WM5100_LDO1ENA_PD_SHIFT 15 /* LDO1ENA_PD */
+#define WM5100_LDO1ENA_PD_WIDTH 1 /* LDO1ENA_PD */
+#define WM5100_MCLK2_PD 0x2000 /* MCLK2_PD */
+#define WM5100_MCLK2_PD_MASK 0x2000 /* MCLK2_PD */
+#define WM5100_MCLK2_PD_SHIFT 13 /* MCLK2_PD */
+#define WM5100_MCLK2_PD_WIDTH 1 /* MCLK2_PD */
+#define WM5100_MCLK1_PD 0x1000 /* MCLK1_PD */
+#define WM5100_MCLK1_PD_MASK 0x1000 /* MCLK1_PD */
+#define WM5100_MCLK1_PD_SHIFT 12 /* MCLK1_PD */
+#define WM5100_MCLK1_PD_WIDTH 1 /* MCLK1_PD */
+#define WM5100_RESET_PU 0x0002 /* RESET_PU */
+#define WM5100_RESET_PU_MASK 0x0002 /* RESET_PU */
+#define WM5100_RESET_PU_SHIFT 1 /* RESET_PU */
+#define WM5100_RESET_PU_WIDTH 1 /* RESET_PU */
+#define WM5100_ADDR_PD 0x0001 /* ADDR_PD */
+#define WM5100_ADDR_PD_MASK 0x0001 /* ADDR_PD */
+#define WM5100_ADDR_PD_SHIFT 0 /* ADDR_PD */
+#define WM5100_ADDR_PD_WIDTH 1 /* ADDR_PD */
+
+/*
+ * R3108 (0xC24) - Misc Pad Ctrl 2
+ */
+#define WM5100_DMICDAT4_PD 0x0008 /* DMICDAT4_PD */
+#define WM5100_DMICDAT4_PD_MASK 0x0008 /* DMICDAT4_PD */
+#define WM5100_DMICDAT4_PD_SHIFT 3 /* DMICDAT4_PD */
+#define WM5100_DMICDAT4_PD_WIDTH 1 /* DMICDAT4_PD */
+#define WM5100_DMICDAT3_PD 0x0004 /* DMICDAT3_PD */
+#define WM5100_DMICDAT3_PD_MASK 0x0004 /* DMICDAT3_PD */
+#define WM5100_DMICDAT3_PD_SHIFT 2 /* DMICDAT3_PD */
+#define WM5100_DMICDAT3_PD_WIDTH 1 /* DMICDAT3_PD */
+#define WM5100_DMICDAT2_PD 0x0002 /* DMICDAT2_PD */
+#define WM5100_DMICDAT2_PD_MASK 0x0002 /* DMICDAT2_PD */
+#define WM5100_DMICDAT2_PD_SHIFT 1 /* DMICDAT2_PD */
+#define WM5100_DMICDAT2_PD_WIDTH 1 /* DMICDAT2_PD */
+#define WM5100_DMICDAT1_PD 0x0001 /* DMICDAT1_PD */
+#define WM5100_DMICDAT1_PD_MASK 0x0001 /* DMICDAT1_PD */
+#define WM5100_DMICDAT1_PD_SHIFT 0 /* DMICDAT1_PD */
+#define WM5100_DMICDAT1_PD_WIDTH 1 /* DMICDAT1_PD */
+
+/*
+ * R3109 (0xC25) - Misc Pad Ctrl 3
+ */
+#define WM5100_AIF1RXLRCLK_PU 0x0020 /* AIF1RXLRCLK_PU */
+#define WM5100_AIF1RXLRCLK_PU_MASK 0x0020 /* AIF1RXLRCLK_PU */
+#define WM5100_AIF1RXLRCLK_PU_SHIFT 5 /* AIF1RXLRCLK_PU */
+#define WM5100_AIF1RXLRCLK_PU_WIDTH 1 /* AIF1RXLRCLK_PU */
+#define WM5100_AIF1RXLRCLK_PD 0x0010 /* AIF1RXLRCLK_PD */
+#define WM5100_AIF1RXLRCLK_PD_MASK 0x0010 /* AIF1RXLRCLK_PD */
+#define WM5100_AIF1RXLRCLK_PD_SHIFT 4 /* AIF1RXLRCLK_PD */
+#define WM5100_AIF1RXLRCLK_PD_WIDTH 1 /* AIF1RXLRCLK_PD */
+#define WM5100_AIF1BCLK_PU 0x0008 /* AIF1BCLK_PU */
+#define WM5100_AIF1BCLK_PU_MASK 0x0008 /* AIF1BCLK_PU */
+#define WM5100_AIF1BCLK_PU_SHIFT 3 /* AIF1BCLK_PU */
+#define WM5100_AIF1BCLK_PU_WIDTH 1 /* AIF1BCLK_PU */
+#define WM5100_AIF1BCLK_PD 0x0004 /* AIF1BCLK_PD */
+#define WM5100_AIF1BCLK_PD_MASK 0x0004 /* AIF1BCLK_PD */
+#define WM5100_AIF1BCLK_PD_SHIFT 2 /* AIF1BCLK_PD */
+#define WM5100_AIF1BCLK_PD_WIDTH 1 /* AIF1BCLK_PD */
+#define WM5100_AIF1RXDAT_PU 0x0002 /* AIF1RXDAT_PU */
+#define WM5100_AIF1RXDAT_PU_MASK 0x0002 /* AIF1RXDAT_PU */
+#define WM5100_AIF1RXDAT_PU_SHIFT 1 /* AIF1RXDAT_PU */
+#define WM5100_AIF1RXDAT_PU_WIDTH 1 /* AIF1RXDAT_PU */
+#define WM5100_AIF1RXDAT_PD 0x0001 /* AIF1RXDAT_PD */
+#define WM5100_AIF1RXDAT_PD_MASK 0x0001 /* AIF1RXDAT_PD */
+#define WM5100_AIF1RXDAT_PD_SHIFT 0 /* AIF1RXDAT_PD */
+#define WM5100_AIF1RXDAT_PD_WIDTH 1 /* AIF1RXDAT_PD */
+
+/*
+ * R3110 (0xC26) - Misc Pad Ctrl 4
+ */
+#define WM5100_AIF2RXLRCLK_PU 0x0020 /* AIF2RXLRCLK_PU */
+#define WM5100_AIF2RXLRCLK_PU_MASK 0x0020 /* AIF2RXLRCLK_PU */
+#define WM5100_AIF2RXLRCLK_PU_SHIFT 5 /* AIF2RXLRCLK_PU */
+#define WM5100_AIF2RXLRCLK_PU_WIDTH 1 /* AIF2RXLRCLK_PU */
+#define WM5100_AIF2RXLRCLK_PD 0x0010 /* AIF2RXLRCLK_PD */
+#define WM5100_AIF2RXLRCLK_PD_MASK 0x0010 /* AIF2RXLRCLK_PD */
+#define WM5100_AIF2RXLRCLK_PD_SHIFT 4 /* AIF2RXLRCLK_PD */
+#define WM5100_AIF2RXLRCLK_PD_WIDTH 1 /* AIF2RXLRCLK_PD */
+#define WM5100_AIF2BCLK_PU 0x0008 /* AIF2BCLK_PU */
+#define WM5100_AIF2BCLK_PU_MASK 0x0008 /* AIF2BCLK_PU */
+#define WM5100_AIF2BCLK_PU_SHIFT 3 /* AIF2BCLK_PU */
+#define WM5100_AIF2BCLK_PU_WIDTH 1 /* AIF2BCLK_PU */
+#define WM5100_AIF2BCLK_PD 0x0004 /* AIF2BCLK_PD */
+#define WM5100_AIF2BCLK_PD_MASK 0x0004 /* AIF2BCLK_PD */
+#define WM5100_AIF2BCLK_PD_SHIFT 2 /* AIF2BCLK_PD */
+#define WM5100_AIF2BCLK_PD_WIDTH 1 /* AIF2BCLK_PD */
+#define WM5100_AIF2RXDAT_PU 0x0002 /* AIF2RXDAT_PU */
+#define WM5100_AIF2RXDAT_PU_MASK 0x0002 /* AIF2RXDAT_PU */
+#define WM5100_AIF2RXDAT_PU_SHIFT 1 /* AIF2RXDAT_PU */
+#define WM5100_AIF2RXDAT_PU_WIDTH 1 /* AIF2RXDAT_PU */
+#define WM5100_AIF2RXDAT_PD 0x0001 /* AIF2RXDAT_PD */
+#define WM5100_AIF2RXDAT_PD_MASK 0x0001 /* AIF2RXDAT_PD */
+#define WM5100_AIF2RXDAT_PD_SHIFT 0 /* AIF2RXDAT_PD */
+#define WM5100_AIF2RXDAT_PD_WIDTH 1 /* AIF2RXDAT_PD */
+
+/*
+ * R3111 (0xC27) - Misc Pad Ctrl 5
+ */
+#define WM5100_AIF3RXLRCLK_PU 0x0020 /* AIF3RXLRCLK_PU */
+#define WM5100_AIF3RXLRCLK_PU_MASK 0x0020 /* AIF3RXLRCLK_PU */
+#define WM5100_AIF3RXLRCLK_PU_SHIFT 5 /* AIF3RXLRCLK_PU */
+#define WM5100_AIF3RXLRCLK_PU_WIDTH 1 /* AIF3RXLRCLK_PU */
+#define WM5100_AIF3RXLRCLK_PD 0x0010 /* AIF3RXLRCLK_PD */
+#define WM5100_AIF3RXLRCLK_PD_MASK 0x0010 /* AIF3RXLRCLK_PD */
+#define WM5100_AIF3RXLRCLK_PD_SHIFT 4 /* AIF3RXLRCLK_PD */
+#define WM5100_AIF3RXLRCLK_PD_WIDTH 1 /* AIF3RXLRCLK_PD */
+#define WM5100_AIF3BCLK_PU 0x0008 /* AIF3BCLK_PU */
+#define WM5100_AIF3BCLK_PU_MASK 0x0008 /* AIF3BCLK_PU */
+#define WM5100_AIF3BCLK_PU_SHIFT 3 /* AIF3BCLK_PU */
+#define WM5100_AIF3BCLK_PU_WIDTH 1 /* AIF3BCLK_PU */
+#define WM5100_AIF3BCLK_PD 0x0004 /* AIF3BCLK_PD */
+#define WM5100_AIF3BCLK_PD_MASK 0x0004 /* AIF3BCLK_PD */
+#define WM5100_AIF3BCLK_PD_SHIFT 2 /* AIF3BCLK_PD */
+#define WM5100_AIF3BCLK_PD_WIDTH 1 /* AIF3BCLK_PD */
+#define WM5100_AIF3RXDAT_PU 0x0002 /* AIF3RXDAT_PU */
+#define WM5100_AIF3RXDAT_PU_MASK 0x0002 /* AIF3RXDAT_PU */
+#define WM5100_AIF3RXDAT_PU_SHIFT 1 /* AIF3RXDAT_PU */
+#define WM5100_AIF3RXDAT_PU_WIDTH 1 /* AIF3RXDAT_PU */
+#define WM5100_AIF3RXDAT_PD 0x0001 /* AIF3RXDAT_PD */
+#define WM5100_AIF3RXDAT_PD_MASK 0x0001 /* AIF3RXDAT_PD */
+#define WM5100_AIF3RXDAT_PD_SHIFT 0 /* AIF3RXDAT_PD */
+#define WM5100_AIF3RXDAT_PD_WIDTH 1 /* AIF3RXDAT_PD */
+
+/*
+ * R3112 (0xC28) - Misc GPIO 1
+ */
+#define WM5100_OPCLK_SEL_MASK 0x0003 /* OPCLK_SEL - [1:0] */
+#define WM5100_OPCLK_SEL_SHIFT 0 /* OPCLK_SEL - [1:0] */
+#define WM5100_OPCLK_SEL_WIDTH 2 /* OPCLK_SEL - [1:0] */
+
+/*
+ * R3328 (0xD00) - Interrupt Status 1
+ */
+#define WM5100_GP6_EINT 0x0020 /* GP6_EINT */
+#define WM5100_GP6_EINT_MASK 0x0020 /* GP6_EINT */
+#define WM5100_GP6_EINT_SHIFT 5 /* GP6_EINT */
+#define WM5100_GP6_EINT_WIDTH 1 /* GP6_EINT */
+#define WM5100_GP5_EINT 0x0010 /* GP5_EINT */
+#define WM5100_GP5_EINT_MASK 0x0010 /* GP5_EINT */
+#define WM5100_GP5_EINT_SHIFT 4 /* GP5_EINT */
+#define WM5100_GP5_EINT_WIDTH 1 /* GP5_EINT */
+#define WM5100_GP4_EINT 0x0008 /* GP4_EINT */
+#define WM5100_GP4_EINT_MASK 0x0008 /* GP4_EINT */
+#define WM5100_GP4_EINT_SHIFT 3 /* GP4_EINT */
+#define WM5100_GP4_EINT_WIDTH 1 /* GP4_EINT */
+#define WM5100_GP3_EINT 0x0004 /* GP3_EINT */
+#define WM5100_GP3_EINT_MASK 0x0004 /* GP3_EINT */
+#define WM5100_GP3_EINT_SHIFT 2 /* GP3_EINT */
+#define WM5100_GP3_EINT_WIDTH 1 /* GP3_EINT */
+#define WM5100_GP2_EINT 0x0002 /* GP2_EINT */
+#define WM5100_GP2_EINT_MASK 0x0002 /* GP2_EINT */
+#define WM5100_GP2_EINT_SHIFT 1 /* GP2_EINT */
+#define WM5100_GP2_EINT_WIDTH 1 /* GP2_EINT */
+#define WM5100_GP1_EINT 0x0001 /* GP1_EINT */
+#define WM5100_GP1_EINT_MASK 0x0001 /* GP1_EINT */
+#define WM5100_GP1_EINT_SHIFT 0 /* GP1_EINT */
+#define WM5100_GP1_EINT_WIDTH 1 /* GP1_EINT */
+
+/*
+ * R3329 (0xD01) - Interrupt Status 2
+ */
+#define WM5100_DSP_IRQ6_EINT 0x0020 /* DSP_IRQ6_EINT */
+#define WM5100_DSP_IRQ6_EINT_MASK 0x0020 /* DSP_IRQ6_EINT */
+#define WM5100_DSP_IRQ6_EINT_SHIFT 5 /* DSP_IRQ6_EINT */
+#define WM5100_DSP_IRQ6_EINT_WIDTH 1 /* DSP_IRQ6_EINT */
+#define WM5100_DSP_IRQ5_EINT 0x0010 /* DSP_IRQ5_EINT */
+#define WM5100_DSP_IRQ5_EINT_MASK 0x0010 /* DSP_IRQ5_EINT */
+#define WM5100_DSP_IRQ5_EINT_SHIFT 4 /* DSP_IRQ5_EINT */
+#define WM5100_DSP_IRQ5_EINT_WIDTH 1 /* DSP_IRQ5_EINT */
+#define WM5100_DSP_IRQ4_EINT 0x0008 /* DSP_IRQ4_EINT */
+#define WM5100_DSP_IRQ4_EINT_MASK 0x0008 /* DSP_IRQ4_EINT */
+#define WM5100_DSP_IRQ4_EINT_SHIFT 3 /* DSP_IRQ4_EINT */
+#define WM5100_DSP_IRQ4_EINT_WIDTH 1 /* DSP_IRQ4_EINT */
+#define WM5100_DSP_IRQ3_EINT 0x0004 /* DSP_IRQ3_EINT */
+#define WM5100_DSP_IRQ3_EINT_MASK 0x0004 /* DSP_IRQ3_EINT */
+#define WM5100_DSP_IRQ3_EINT_SHIFT 2 /* DSP_IRQ3_EINT */
+#define WM5100_DSP_IRQ3_EINT_WIDTH 1 /* DSP_IRQ3_EINT */
+#define WM5100_DSP_IRQ2_EINT 0x0002 /* DSP_IRQ2_EINT */
+#define WM5100_DSP_IRQ2_EINT_MASK 0x0002 /* DSP_IRQ2_EINT */
+#define WM5100_DSP_IRQ2_EINT_SHIFT 1 /* DSP_IRQ2_EINT */
+#define WM5100_DSP_IRQ2_EINT_WIDTH 1 /* DSP_IRQ2_EINT */
+#define WM5100_DSP_IRQ1_EINT 0x0001 /* DSP_IRQ1_EINT */
+#define WM5100_DSP_IRQ1_EINT_MASK 0x0001 /* DSP_IRQ1_EINT */
+#define WM5100_DSP_IRQ1_EINT_SHIFT 0 /* DSP_IRQ1_EINT */
+#define WM5100_DSP_IRQ1_EINT_WIDTH 1 /* DSP_IRQ1_EINT */
+
+/*
+ * R3330 (0xD02) - Interrupt Status 3
+ */
+#define WM5100_SPK_SHUTDOWN_WARN_EINT 0x8000 /* SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_SPK_SHUTDOWN_WARN_EINT_MASK 0x8000 /* SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_SPK_SHUTDOWN_WARN_EINT_SHIFT 15 /* SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_SPK_SHUTDOWN_WARN_EINT_WIDTH 1 /* SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_SPK_SHUTDOWN_EINT 0x4000 /* SPK_SHUTDOWN_EINT */
+#define WM5100_SPK_SHUTDOWN_EINT_MASK 0x4000 /* SPK_SHUTDOWN_EINT */
+#define WM5100_SPK_SHUTDOWN_EINT_SHIFT 14 /* SPK_SHUTDOWN_EINT */
+#define WM5100_SPK_SHUTDOWN_EINT_WIDTH 1 /* SPK_SHUTDOWN_EINT */
+#define WM5100_HPDET_EINT 0x2000 /* HPDET_EINT */
+#define WM5100_HPDET_EINT_MASK 0x2000 /* HPDET_EINT */
+#define WM5100_HPDET_EINT_SHIFT 13 /* HPDET_EINT */
+#define WM5100_HPDET_EINT_WIDTH 1 /* HPDET_EINT */
+#define WM5100_ACCDET_EINT 0x1000 /* ACCDET_EINT */
+#define WM5100_ACCDET_EINT_MASK 0x1000 /* ACCDET_EINT */
+#define WM5100_ACCDET_EINT_SHIFT 12 /* ACCDET_EINT */
+#define WM5100_ACCDET_EINT_WIDTH 1 /* ACCDET_EINT */
+#define WM5100_DRC_SIG_DET_EINT 0x0200 /* DRC_SIG_DET_EINT */
+#define WM5100_DRC_SIG_DET_EINT_MASK 0x0200 /* DRC_SIG_DET_EINT */
+#define WM5100_DRC_SIG_DET_EINT_SHIFT 9 /* DRC_SIG_DET_EINT */
+#define WM5100_DRC_SIG_DET_EINT_WIDTH 1 /* DRC_SIG_DET_EINT */
+#define WM5100_ASRC2_LOCK_EINT 0x0100 /* ASRC2_LOCK_EINT */
+#define WM5100_ASRC2_LOCK_EINT_MASK 0x0100 /* ASRC2_LOCK_EINT */
+#define WM5100_ASRC2_LOCK_EINT_SHIFT 8 /* ASRC2_LOCK_EINT */
+#define WM5100_ASRC2_LOCK_EINT_WIDTH 1 /* ASRC2_LOCK_EINT */
+#define WM5100_ASRC1_LOCK_EINT 0x0080 /* ASRC1_LOCK_EINT */
+#define WM5100_ASRC1_LOCK_EINT_MASK 0x0080 /* ASRC1_LOCK_EINT */
+#define WM5100_ASRC1_LOCK_EINT_SHIFT 7 /* ASRC1_LOCK_EINT */
+#define WM5100_ASRC1_LOCK_EINT_WIDTH 1 /* ASRC1_LOCK_EINT */
+#define WM5100_FLL2_LOCK_EINT 0x0008 /* FLL2_LOCK_EINT */
+#define WM5100_FLL2_LOCK_EINT_MASK 0x0008 /* FLL2_LOCK_EINT */
+#define WM5100_FLL2_LOCK_EINT_SHIFT 3 /* FLL2_LOCK_EINT */
+#define WM5100_FLL2_LOCK_EINT_WIDTH 1 /* FLL2_LOCK_EINT */
+#define WM5100_FLL1_LOCK_EINT 0x0004 /* FLL1_LOCK_EINT */
+#define WM5100_FLL1_LOCK_EINT_MASK 0x0004 /* FLL1_LOCK_EINT */
+#define WM5100_FLL1_LOCK_EINT_SHIFT 2 /* FLL1_LOCK_EINT */
+#define WM5100_FLL1_LOCK_EINT_WIDTH 1 /* FLL1_LOCK_EINT */
+#define WM5100_CLKGEN_ERR_EINT 0x0002 /* CLKGEN_ERR_EINT */
+#define WM5100_CLKGEN_ERR_EINT_MASK 0x0002 /* CLKGEN_ERR_EINT */
+#define WM5100_CLKGEN_ERR_EINT_SHIFT 1 /* CLKGEN_ERR_EINT */
+#define WM5100_CLKGEN_ERR_EINT_WIDTH 1 /* CLKGEN_ERR_EINT */
+#define WM5100_CLKGEN_ERR_ASYNC_EINT 0x0001 /* CLKGEN_ERR_ASYNC_EINT */
+#define WM5100_CLKGEN_ERR_ASYNC_EINT_MASK 0x0001 /* CLKGEN_ERR_ASYNC_EINT */
+#define WM5100_CLKGEN_ERR_ASYNC_EINT_SHIFT 0 /* CLKGEN_ERR_ASYNC_EINT */
+#define WM5100_CLKGEN_ERR_ASYNC_EINT_WIDTH 1 /* CLKGEN_ERR_ASYNC_EINT */
+
+/*
+ * R3331 (0xD03) - Interrupt Status 4
+ */
+#define WM5100_AIF3_ERR_EINT 0x2000 /* AIF3_ERR_EINT */
+#define WM5100_AIF3_ERR_EINT_MASK 0x2000 /* AIF3_ERR_EINT */
+#define WM5100_AIF3_ERR_EINT_SHIFT 13 /* AIF3_ERR_EINT */
+#define WM5100_AIF3_ERR_EINT_WIDTH 1 /* AIF3_ERR_EINT */
+#define WM5100_AIF2_ERR_EINT 0x1000 /* AIF2_ERR_EINT */
+#define WM5100_AIF2_ERR_EINT_MASK 0x1000 /* AIF2_ERR_EINT */
+#define WM5100_AIF2_ERR_EINT_SHIFT 12 /* AIF2_ERR_EINT */
+#define WM5100_AIF2_ERR_EINT_WIDTH 1 /* AIF2_ERR_EINT */
+#define WM5100_AIF1_ERR_EINT 0x0800 /* AIF1_ERR_EINT */
+#define WM5100_AIF1_ERR_EINT_MASK 0x0800 /* AIF1_ERR_EINT */
+#define WM5100_AIF1_ERR_EINT_SHIFT 11 /* AIF1_ERR_EINT */
+#define WM5100_AIF1_ERR_EINT_WIDTH 1 /* AIF1_ERR_EINT */
+#define WM5100_CTRLIF_ERR_EINT 0x0400 /* CTRLIF_ERR_EINT */
+#define WM5100_CTRLIF_ERR_EINT_MASK 0x0400 /* CTRLIF_ERR_EINT */
+#define WM5100_CTRLIF_ERR_EINT_SHIFT 10 /* CTRLIF_ERR_EINT */
+#define WM5100_CTRLIF_ERR_EINT_WIDTH 1 /* CTRLIF_ERR_EINT */
+#define WM5100_ISRC2_UNDERCLOCKED_EINT 0x0200 /* ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_ISRC2_UNDERCLOCKED_EINT_MASK 0x0200 /* ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_ISRC2_UNDERCLOCKED_EINT_SHIFT 9 /* ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_ISRC2_UNDERCLOCKED_EINT_WIDTH 1 /* ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_ISRC1_UNDERCLOCKED_EINT 0x0100 /* ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_ISRC1_UNDERCLOCKED_EINT_MASK 0x0100 /* ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_ISRC1_UNDERCLOCKED_EINT_SHIFT 8 /* ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_ISRC1_UNDERCLOCKED_EINT_WIDTH 1 /* ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_FX_UNDERCLOCKED_EINT 0x0080 /* FX_UNDERCLOCKED_EINT */
+#define WM5100_FX_UNDERCLOCKED_EINT_MASK 0x0080 /* FX_UNDERCLOCKED_EINT */
+#define WM5100_FX_UNDERCLOCKED_EINT_SHIFT 7 /* FX_UNDERCLOCKED_EINT */
+#define WM5100_FX_UNDERCLOCKED_EINT_WIDTH 1 /* FX_UNDERCLOCKED_EINT */
+#define WM5100_AIF3_UNDERCLOCKED_EINT 0x0040 /* AIF3_UNDERCLOCKED_EINT */
+#define WM5100_AIF3_UNDERCLOCKED_EINT_MASK 0x0040 /* AIF3_UNDERCLOCKED_EINT */
+#define WM5100_AIF3_UNDERCLOCKED_EINT_SHIFT 6 /* AIF3_UNDERCLOCKED_EINT */
+#define WM5100_AIF3_UNDERCLOCKED_EINT_WIDTH 1 /* AIF3_UNDERCLOCKED_EINT */
+#define WM5100_AIF2_UNDERCLOCKED_EINT 0x0020 /* AIF2_UNDERCLOCKED_EINT */
+#define WM5100_AIF2_UNDERCLOCKED_EINT_MASK 0x0020 /* AIF2_UNDERCLOCKED_EINT */
+#define WM5100_AIF2_UNDERCLOCKED_EINT_SHIFT 5 /* AIF2_UNDERCLOCKED_EINT */
+#define WM5100_AIF2_UNDERCLOCKED_EINT_WIDTH 1 /* AIF2_UNDERCLOCKED_EINT */
+#define WM5100_AIF1_UNDERCLOCKED_EINT 0x0010 /* AIF1_UNDERCLOCKED_EINT */
+#define WM5100_AIF1_UNDERCLOCKED_EINT_MASK 0x0010 /* AIF1_UNDERCLOCKED_EINT */
+#define WM5100_AIF1_UNDERCLOCKED_EINT_SHIFT 4 /* AIF1_UNDERCLOCKED_EINT */
+#define WM5100_AIF1_UNDERCLOCKED_EINT_WIDTH 1 /* AIF1_UNDERCLOCKED_EINT */
+#define WM5100_ASRC_UNDERCLOCKED_EINT 0x0008 /* ASRC_UNDERCLOCKED_EINT */
+#define WM5100_ASRC_UNDERCLOCKED_EINT_MASK 0x0008 /* ASRC_UNDERCLOCKED_EINT */
+#define WM5100_ASRC_UNDERCLOCKED_EINT_SHIFT 3 /* ASRC_UNDERCLOCKED_EINT */
+#define WM5100_ASRC_UNDERCLOCKED_EINT_WIDTH 1 /* ASRC_UNDERCLOCKED_EINT */
+#define WM5100_DAC_UNDERCLOCKED_EINT 0x0004 /* DAC_UNDERCLOCKED_EINT */
+#define WM5100_DAC_UNDERCLOCKED_EINT_MASK 0x0004 /* DAC_UNDERCLOCKED_EINT */
+#define WM5100_DAC_UNDERCLOCKED_EINT_SHIFT 2 /* DAC_UNDERCLOCKED_EINT */
+#define WM5100_DAC_UNDERCLOCKED_EINT_WIDTH 1 /* DAC_UNDERCLOCKED_EINT */
+#define WM5100_ADC_UNDERCLOCKED_EINT 0x0002 /* ADC_UNDERCLOCKED_EINT */
+#define WM5100_ADC_UNDERCLOCKED_EINT_MASK 0x0002 /* ADC_UNDERCLOCKED_EINT */
+#define WM5100_ADC_UNDERCLOCKED_EINT_SHIFT 1 /* ADC_UNDERCLOCKED_EINT */
+#define WM5100_ADC_UNDERCLOCKED_EINT_WIDTH 1 /* ADC_UNDERCLOCKED_EINT */
+#define WM5100_MIXER_UNDERCLOCKED_EINT 0x0001 /* MIXER_UNDERCLOCKED_EINT */
+#define WM5100_MIXER_UNDERCLOCKED_EINT_MASK 0x0001 /* MIXER_UNDERCLOCKED_EINT */
+#define WM5100_MIXER_UNDERCLOCKED_EINT_SHIFT 0 /* MIXER_UNDERCLOCKED_EINT */
+#define WM5100_MIXER_UNDERCLOCKED_EINT_WIDTH 1 /* MIXER_UNDERCLOCKED_EINT */
+
+/*
+ * R3332 (0xD04) - Interrupt Raw Status 2
+ */
+#define WM5100_DSP_IRQ6_STS 0x0020 /* DSP_IRQ6_STS */
+#define WM5100_DSP_IRQ6_STS_MASK 0x0020 /* DSP_IRQ6_STS */
+#define WM5100_DSP_IRQ6_STS_SHIFT 5 /* DSP_IRQ6_STS */
+#define WM5100_DSP_IRQ6_STS_WIDTH 1 /* DSP_IRQ6_STS */
+#define WM5100_DSP_IRQ5_STS 0x0010 /* DSP_IRQ5_STS */
+#define WM5100_DSP_IRQ5_STS_MASK 0x0010 /* DSP_IRQ5_STS */
+#define WM5100_DSP_IRQ5_STS_SHIFT 4 /* DSP_IRQ5_STS */
+#define WM5100_DSP_IRQ5_STS_WIDTH 1 /* DSP_IRQ5_STS */
+#define WM5100_DSP_IRQ4_STS 0x0008 /* DSP_IRQ4_STS */
+#define WM5100_DSP_IRQ4_STS_MASK 0x0008 /* DSP_IRQ4_STS */
+#define WM5100_DSP_IRQ4_STS_SHIFT 3 /* DSP_IRQ4_STS */
+#define WM5100_DSP_IRQ4_STS_WIDTH 1 /* DSP_IRQ4_STS */
+#define WM5100_DSP_IRQ3_STS 0x0004 /* DSP_IRQ3_STS */
+#define WM5100_DSP_IRQ3_STS_MASK 0x0004 /* DSP_IRQ3_STS */
+#define WM5100_DSP_IRQ3_STS_SHIFT 2 /* DSP_IRQ3_STS */
+#define WM5100_DSP_IRQ3_STS_WIDTH 1 /* DSP_IRQ3_STS */
+#define WM5100_DSP_IRQ2_STS 0x0002 /* DSP_IRQ2_STS */
+#define WM5100_DSP_IRQ2_STS_MASK 0x0002 /* DSP_IRQ2_STS */
+#define WM5100_DSP_IRQ2_STS_SHIFT 1 /* DSP_IRQ2_STS */
+#define WM5100_DSP_IRQ2_STS_WIDTH 1 /* DSP_IRQ2_STS */
+#define WM5100_DSP_IRQ1_STS 0x0001 /* DSP_IRQ1_STS */
+#define WM5100_DSP_IRQ1_STS_MASK 0x0001 /* DSP_IRQ1_STS */
+#define WM5100_DSP_IRQ1_STS_SHIFT 0 /* DSP_IRQ1_STS */
+#define WM5100_DSP_IRQ1_STS_WIDTH 1 /* DSP_IRQ1_STS */
+
+/*
+ * R3333 (0xD05) - Interrupt Raw Status 3
+ */
+#define WM5100_SPK_SHUTDOWN_WARN_STS 0x8000 /* SPK_SHUTDOWN_WARN_STS */
+#define WM5100_SPK_SHUTDOWN_WARN_STS_MASK 0x8000 /* SPK_SHUTDOWN_WARN_STS */
+#define WM5100_SPK_SHUTDOWN_WARN_STS_SHIFT 15 /* SPK_SHUTDOWN_WARN_STS */
+#define WM5100_SPK_SHUTDOWN_WARN_STS_WIDTH 1 /* SPK_SHUTDOWN_WARN_STS */
+#define WM5100_SPK_SHUTDOWN_STS 0x4000 /* SPK_SHUTDOWN_STS */
+#define WM5100_SPK_SHUTDOWN_STS_MASK 0x4000 /* SPK_SHUTDOWN_STS */
+#define WM5100_SPK_SHUTDOWN_STS_SHIFT 14 /* SPK_SHUTDOWN_STS */
+#define WM5100_SPK_SHUTDOWN_STS_WIDTH 1 /* SPK_SHUTDOWN_STS */
+#define WM5100_HPDET_STS 0x2000 /* HPDET_STS */
+#define WM5100_HPDET_STS_MASK 0x2000 /* HPDET_STS */
+#define WM5100_HPDET_STS_SHIFT 13 /* HPDET_STS */
+#define WM5100_HPDET_STS_WIDTH 1 /* HPDET_STS */
+#define WM5100_DRC_SID_DET_STS 0x0200 /* DRC_SID_DET_STS */
+#define WM5100_DRC_SID_DET_STS_MASK 0x0200 /* DRC_SID_DET_STS */
+#define WM5100_DRC_SID_DET_STS_SHIFT 9 /* DRC_SID_DET_STS */
+#define WM5100_DRC_SID_DET_STS_WIDTH 1 /* DRC_SID_DET_STS */
+#define WM5100_ASRC2_LOCK_STS 0x0100 /* ASRC2_LOCK_STS */
+#define WM5100_ASRC2_LOCK_STS_MASK 0x0100 /* ASRC2_LOCK_STS */
+#define WM5100_ASRC2_LOCK_STS_SHIFT 8 /* ASRC2_LOCK_STS */
+#define WM5100_ASRC2_LOCK_STS_WIDTH 1 /* ASRC2_LOCK_STS */
+#define WM5100_ASRC1_LOCK_STS 0x0080 /* ASRC1_LOCK_STS */
+#define WM5100_ASRC1_LOCK_STS_MASK 0x0080 /* ASRC1_LOCK_STS */
+#define WM5100_ASRC1_LOCK_STS_SHIFT 7 /* ASRC1_LOCK_STS */
+#define WM5100_ASRC1_LOCK_STS_WIDTH 1 /* ASRC1_LOCK_STS */
+#define WM5100_FLL2_LOCK_STS 0x0008 /* FLL2_LOCK_STS */
+#define WM5100_FLL2_LOCK_STS_MASK 0x0008 /* FLL2_LOCK_STS */
+#define WM5100_FLL2_LOCK_STS_SHIFT 3 /* FLL2_LOCK_STS */
+#define WM5100_FLL2_LOCK_STS_WIDTH 1 /* FLL2_LOCK_STS */
+#define WM5100_FLL1_LOCK_STS 0x0004 /* FLL1_LOCK_STS */
+#define WM5100_FLL1_LOCK_STS_MASK 0x0004 /* FLL1_LOCK_STS */
+#define WM5100_FLL1_LOCK_STS_SHIFT 2 /* FLL1_LOCK_STS */
+#define WM5100_FLL1_LOCK_STS_WIDTH 1 /* FLL1_LOCK_STS */
+#define WM5100_CLKGEN_ERR_STS 0x0002 /* CLKGEN_ERR_STS */
+#define WM5100_CLKGEN_ERR_STS_MASK 0x0002 /* CLKGEN_ERR_STS */
+#define WM5100_CLKGEN_ERR_STS_SHIFT 1 /* CLKGEN_ERR_STS */
+#define WM5100_CLKGEN_ERR_STS_WIDTH 1 /* CLKGEN_ERR_STS */
+#define WM5100_CLKGEN_ERR_ASYNC_STS 0x0001 /* CLKGEN_ERR_ASYNC_STS */
+#define WM5100_CLKGEN_ERR_ASYNC_STS_MASK 0x0001 /* CLKGEN_ERR_ASYNC_STS */
+#define WM5100_CLKGEN_ERR_ASYNC_STS_SHIFT 0 /* CLKGEN_ERR_ASYNC_STS */
+#define WM5100_CLKGEN_ERR_ASYNC_STS_WIDTH 1 /* CLKGEN_ERR_ASYNC_STS */
+
+/*
+ * R3334 (0xD06) - Interrupt Raw Status 4
+ */
+#define WM5100_AIF3_ERR_STS 0x2000 /* AIF3_ERR_STS */
+#define WM5100_AIF3_ERR_STS_MASK 0x2000 /* AIF3_ERR_STS */
+#define WM5100_AIF3_ERR_STS_SHIFT 13 /* AIF3_ERR_STS */
+#define WM5100_AIF3_ERR_STS_WIDTH 1 /* AIF3_ERR_STS */
+#define WM5100_AIF2_ERR_STS 0x1000 /* AIF2_ERR_STS */
+#define WM5100_AIF2_ERR_STS_MASK 0x1000 /* AIF2_ERR_STS */
+#define WM5100_AIF2_ERR_STS_SHIFT 12 /* AIF2_ERR_STS */
+#define WM5100_AIF2_ERR_STS_WIDTH 1 /* AIF2_ERR_STS */
+#define WM5100_AIF1_ERR_STS 0x0800 /* AIF1_ERR_STS */
+#define WM5100_AIF1_ERR_STS_MASK 0x0800 /* AIF1_ERR_STS */
+#define WM5100_AIF1_ERR_STS_SHIFT 11 /* AIF1_ERR_STS */
+#define WM5100_AIF1_ERR_STS_WIDTH 1 /* AIF1_ERR_STS */
+#define WM5100_CTRLIF_ERR_STS 0x0400 /* CTRLIF_ERR_STS */
+#define WM5100_CTRLIF_ERR_STS_MASK 0x0400 /* CTRLIF_ERR_STS */
+#define WM5100_CTRLIF_ERR_STS_SHIFT 10 /* CTRLIF_ERR_STS */
+#define WM5100_CTRLIF_ERR_STS_WIDTH 1 /* CTRLIF_ERR_STS */
+#define WM5100_ISRC2_UNDERCLOCKED_STS 0x0200 /* ISRC2_UNDERCLOCKED_STS */
+#define WM5100_ISRC2_UNDERCLOCKED_STS_MASK 0x0200 /* ISRC2_UNDERCLOCKED_STS */
+#define WM5100_ISRC2_UNDERCLOCKED_STS_SHIFT 9 /* ISRC2_UNDERCLOCKED_STS */
+#define WM5100_ISRC2_UNDERCLOCKED_STS_WIDTH 1 /* ISRC2_UNDERCLOCKED_STS */
+#define WM5100_ISRC1_UNDERCLOCKED_STS 0x0100 /* ISRC1_UNDERCLOCKED_STS */
+#define WM5100_ISRC1_UNDERCLOCKED_STS_MASK 0x0100 /* ISRC1_UNDERCLOCKED_STS */
+#define WM5100_ISRC1_UNDERCLOCKED_STS_SHIFT 8 /* ISRC1_UNDERCLOCKED_STS */
+#define WM5100_ISRC1_UNDERCLOCKED_STS_WIDTH 1 /* ISRC1_UNDERCLOCKED_STS */
+#define WM5100_FX_UNDERCLOCKED_STS 0x0080 /* FX_UNDERCLOCKED_STS */
+#define WM5100_FX_UNDERCLOCKED_STS_MASK 0x0080 /* FX_UNDERCLOCKED_STS */
+#define WM5100_FX_UNDERCLOCKED_STS_SHIFT 7 /* FX_UNDERCLOCKED_STS */
+#define WM5100_FX_UNDERCLOCKED_STS_WIDTH 1 /* FX_UNDERCLOCKED_STS */
+#define WM5100_AIF3_UNDERCLOCKED_STS 0x0040 /* AIF3_UNDERCLOCKED_STS */
+#define WM5100_AIF3_UNDERCLOCKED_STS_MASK 0x0040 /* AIF3_UNDERCLOCKED_STS */
+#define WM5100_AIF3_UNDERCLOCKED_STS_SHIFT 6 /* AIF3_UNDERCLOCKED_STS */
+#define WM5100_AIF3_UNDERCLOCKED_STS_WIDTH 1 /* AIF3_UNDERCLOCKED_STS */
+#define WM5100_AIF2_UNDERCLOCKED_STS 0x0020 /* AIF2_UNDERCLOCKED_STS */
+#define WM5100_AIF2_UNDERCLOCKED_STS_MASK 0x0020 /* AIF2_UNDERCLOCKED_STS */
+#define WM5100_AIF2_UNDERCLOCKED_STS_SHIFT 5 /* AIF2_UNDERCLOCKED_STS */
+#define WM5100_AIF2_UNDERCLOCKED_STS_WIDTH 1 /* AIF2_UNDERCLOCKED_STS */
+#define WM5100_AIF1_UNDERCLOCKED_STS 0x0010 /* AIF1_UNDERCLOCKED_STS */
+#define WM5100_AIF1_UNDERCLOCKED_STS_MASK 0x0010 /* AIF1_UNDERCLOCKED_STS */
+#define WM5100_AIF1_UNDERCLOCKED_STS_SHIFT 4 /* AIF1_UNDERCLOCKED_STS */
+#define WM5100_AIF1_UNDERCLOCKED_STS_WIDTH 1 /* AIF1_UNDERCLOCKED_STS */
+#define WM5100_ASRC_UNDERCLOCKED_STS 0x0008 /* ASRC_UNDERCLOCKED_STS */
+#define WM5100_ASRC_UNDERCLOCKED_STS_MASK 0x0008 /* ASRC_UNDERCLOCKED_STS */
+#define WM5100_ASRC_UNDERCLOCKED_STS_SHIFT 3 /* ASRC_UNDERCLOCKED_STS */
+#define WM5100_ASRC_UNDERCLOCKED_STS_WIDTH 1 /* ASRC_UNDERCLOCKED_STS */
+#define WM5100_DAC_UNDERCLOCKED_STS 0x0004 /* DAC_UNDERCLOCKED_STS */
+#define WM5100_DAC_UNDERCLOCKED_STS_MASK 0x0004 /* DAC_UNDERCLOCKED_STS */
+#define WM5100_DAC_UNDERCLOCKED_STS_SHIFT 2 /* DAC_UNDERCLOCKED_STS */
+#define WM5100_DAC_UNDERCLOCKED_STS_WIDTH 1 /* DAC_UNDERCLOCKED_STS */
+#define WM5100_ADC_UNDERCLOCKED_STS 0x0002 /* ADC_UNDERCLOCKED_STS */
+#define WM5100_ADC_UNDERCLOCKED_STS_MASK 0x0002 /* ADC_UNDERCLOCKED_STS */
+#define WM5100_ADC_UNDERCLOCKED_STS_SHIFT 1 /* ADC_UNDERCLOCKED_STS */
+#define WM5100_ADC_UNDERCLOCKED_STS_WIDTH 1 /* ADC_UNDERCLOCKED_STS */
+#define WM5100_MIXER_UNDERCLOCKED_STS 0x0001 /* MIXER_UNDERCLOCKED_STS */
+#define WM5100_MIXER_UNDERCLOCKED_STS_MASK 0x0001 /* MIXER_UNDERCLOCKED_STS */
+#define WM5100_MIXER_UNDERCLOCKED_STS_SHIFT 0 /* MIXER_UNDERCLOCKED_STS */
+#define WM5100_MIXER_UNDERCLOCKED_STS_WIDTH 1 /* MIXER_UNDERCLOCKED_STS */
+
+/*
+ * R3335 (0xD07) - Interrupt Status 1 Mask
+ */
+#define WM5100_IM_GP6_EINT 0x0020 /* IM_GP6_EINT */
+#define WM5100_IM_GP6_EINT_MASK 0x0020 /* IM_GP6_EINT */
+#define WM5100_IM_GP6_EINT_SHIFT 5 /* IM_GP6_EINT */
+#define WM5100_IM_GP6_EINT_WIDTH 1 /* IM_GP6_EINT */
+#define WM5100_IM_GP5_EINT 0x0010 /* IM_GP5_EINT */
+#define WM5100_IM_GP5_EINT_MASK 0x0010 /* IM_GP5_EINT */
+#define WM5100_IM_GP5_EINT_SHIFT 4 /* IM_GP5_EINT */
+#define WM5100_IM_GP5_EINT_WIDTH 1 /* IM_GP5_EINT */
+#define WM5100_IM_GP4_EINT 0x0008 /* IM_GP4_EINT */
+#define WM5100_IM_GP4_EINT_MASK 0x0008 /* IM_GP4_EINT */
+#define WM5100_IM_GP4_EINT_SHIFT 3 /* IM_GP4_EINT */
+#define WM5100_IM_GP4_EINT_WIDTH 1 /* IM_GP4_EINT */
+#define WM5100_IM_GP3_EINT 0x0004 /* IM_GP3_EINT */
+#define WM5100_IM_GP3_EINT_MASK 0x0004 /* IM_GP3_EINT */
+#define WM5100_IM_GP3_EINT_SHIFT 2 /* IM_GP3_EINT */
+#define WM5100_IM_GP3_EINT_WIDTH 1 /* IM_GP3_EINT */
+#define WM5100_IM_GP2_EINT 0x0002 /* IM_GP2_EINT */
+#define WM5100_IM_GP2_EINT_MASK 0x0002 /* IM_GP2_EINT */
+#define WM5100_IM_GP2_EINT_SHIFT 1 /* IM_GP2_EINT */
+#define WM5100_IM_GP2_EINT_WIDTH 1 /* IM_GP2_EINT */
+#define WM5100_IM_GP1_EINT 0x0001 /* IM_GP1_EINT */
+#define WM5100_IM_GP1_EINT_MASK 0x0001 /* IM_GP1_EINT */
+#define WM5100_IM_GP1_EINT_SHIFT 0 /* IM_GP1_EINT */
+#define WM5100_IM_GP1_EINT_WIDTH 1 /* IM_GP1_EINT */
+
+/*
+ * R3336 (0xD08) - Interrupt Status 2 Mask
+ */
+#define WM5100_IM_DSP_IRQ6_EINT 0x0020 /* IM_DSP_IRQ6_EINT */
+#define WM5100_IM_DSP_IRQ6_EINT_MASK 0x0020 /* IM_DSP_IRQ6_EINT */
+#define WM5100_IM_DSP_IRQ6_EINT_SHIFT 5 /* IM_DSP_IRQ6_EINT */
+#define WM5100_IM_DSP_IRQ6_EINT_WIDTH 1 /* IM_DSP_IRQ6_EINT */
+#define WM5100_IM_DSP_IRQ5_EINT 0x0010 /* IM_DSP_IRQ5_EINT */
+#define WM5100_IM_DSP_IRQ5_EINT_MASK 0x0010 /* IM_DSP_IRQ5_EINT */
+#define WM5100_IM_DSP_IRQ5_EINT_SHIFT 4 /* IM_DSP_IRQ5_EINT */
+#define WM5100_IM_DSP_IRQ5_EINT_WIDTH 1 /* IM_DSP_IRQ5_EINT */
+#define WM5100_IM_DSP_IRQ4_EINT 0x0008 /* IM_DSP_IRQ4_EINT */
+#define WM5100_IM_DSP_IRQ4_EINT_MASK 0x0008 /* IM_DSP_IRQ4_EINT */
+#define WM5100_IM_DSP_IRQ4_EINT_SHIFT 3 /* IM_DSP_IRQ4_EINT */
+#define WM5100_IM_DSP_IRQ4_EINT_WIDTH 1 /* IM_DSP_IRQ4_EINT */
+#define WM5100_IM_DSP_IRQ3_EINT 0x0004 /* IM_DSP_IRQ3_EINT */
+#define WM5100_IM_DSP_IRQ3_EINT_MASK 0x0004 /* IM_DSP_IRQ3_EINT */
+#define WM5100_IM_DSP_IRQ3_EINT_SHIFT 2 /* IM_DSP_IRQ3_EINT */
+#define WM5100_IM_DSP_IRQ3_EINT_WIDTH 1 /* IM_DSP_IRQ3_EINT */
+#define WM5100_IM_DSP_IRQ2_EINT 0x0002 /* IM_DSP_IRQ2_EINT */
+#define WM5100_IM_DSP_IRQ2_EINT_MASK 0x0002 /* IM_DSP_IRQ2_EINT */
+#define WM5100_IM_DSP_IRQ2_EINT_SHIFT 1 /* IM_DSP_IRQ2_EINT */
+#define WM5100_IM_DSP_IRQ2_EINT_WIDTH 1 /* IM_DSP_IRQ2_EINT */
+#define WM5100_IM_DSP_IRQ1_EINT 0x0001 /* IM_DSP_IRQ1_EINT */
+#define WM5100_IM_DSP_IRQ1_EINT_MASK 0x0001 /* IM_DSP_IRQ1_EINT */
+#define WM5100_IM_DSP_IRQ1_EINT_SHIFT 0 /* IM_DSP_IRQ1_EINT */
+#define WM5100_IM_DSP_IRQ1_EINT_WIDTH 1 /* IM_DSP_IRQ1_EINT */
+
+/*
+ * R3337 (0xD09) - Interrupt Status 3 Mask
+ */
+#define WM5100_IM_SPK_SHUTDOWN_WARN_EINT 0x8000 /* IM_SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_IM_SPK_SHUTDOWN_WARN_EINT_MASK 0x8000 /* IM_SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_IM_SPK_SHUTDOWN_WARN_EINT_SHIFT 15 /* IM_SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_IM_SPK_SHUTDOWN_WARN_EINT_WIDTH 1 /* IM_SPK_SHUTDOWN_WARN_EINT */
+#define WM5100_IM_SPK_SHUTDOWN_EINT 0x4000 /* IM_SPK_SHUTDOWN_EINT */
+#define WM5100_IM_SPK_SHUTDOWN_EINT_MASK 0x4000 /* IM_SPK_SHUTDOWN_EINT */
+#define WM5100_IM_SPK_SHUTDOWN_EINT_SHIFT 14 /* IM_SPK_SHUTDOWN_EINT */
+#define WM5100_IM_SPK_SHUTDOWN_EINT_WIDTH 1 /* IM_SPK_SHUTDOWN_EINT */
+#define WM5100_IM_HPDET_EINT 0x2000 /* IM_HPDET_EINT */
+#define WM5100_IM_HPDET_EINT_MASK 0x2000 /* IM_HPDET_EINT */
+#define WM5100_IM_HPDET_EINT_SHIFT 13 /* IM_HPDET_EINT */
+#define WM5100_IM_HPDET_EINT_WIDTH 1 /* IM_HPDET_EINT */
+#define WM5100_IM_ACCDET_EINT 0x1000 /* IM_ACCDET_EINT */
+#define WM5100_IM_ACCDET_EINT_MASK 0x1000 /* IM_ACCDET_EINT */
+#define WM5100_IM_ACCDET_EINT_SHIFT 12 /* IM_ACCDET_EINT */
+#define WM5100_IM_ACCDET_EINT_WIDTH 1 /* IM_ACCDET_EINT */
+#define WM5100_IM_DRC_SIG_DET_EINT 0x0200 /* IM_DRC_SIG_DET_EINT */
+#define WM5100_IM_DRC_SIG_DET_EINT_MASK 0x0200 /* IM_DRC_SIG_DET_EINT */
+#define WM5100_IM_DRC_SIG_DET_EINT_SHIFT 9 /* IM_DRC_SIG_DET_EINT */
+#define WM5100_IM_DRC_SIG_DET_EINT_WIDTH 1 /* IM_DRC_SIG_DET_EINT */
+#define WM5100_IM_ASRC2_LOCK_EINT 0x0100 /* IM_ASRC2_LOCK_EINT */
+#define WM5100_IM_ASRC2_LOCK_EINT_MASK 0x0100 /* IM_ASRC2_LOCK_EINT */
+#define WM5100_IM_ASRC2_LOCK_EINT_SHIFT 8 /* IM_ASRC2_LOCK_EINT */
+#define WM5100_IM_ASRC2_LOCK_EINT_WIDTH 1 /* IM_ASRC2_LOCK_EINT */
+#define WM5100_IM_ASRC1_LOCK_EINT 0x0080 /* IM_ASRC1_LOCK_EINT */
+#define WM5100_IM_ASRC1_LOCK_EINT_MASK 0x0080 /* IM_ASRC1_LOCK_EINT */
+#define WM5100_IM_ASRC1_LOCK_EINT_SHIFT 7 /* IM_ASRC1_LOCK_EINT */
+#define WM5100_IM_ASRC1_LOCK_EINT_WIDTH 1 /* IM_ASRC1_LOCK_EINT */
+#define WM5100_IM_FLL2_LOCK_EINT 0x0008 /* IM_FLL2_LOCK_EINT */
+#define WM5100_IM_FLL2_LOCK_EINT_MASK 0x0008 /* IM_FLL2_LOCK_EINT */
+#define WM5100_IM_FLL2_LOCK_EINT_SHIFT 3 /* IM_FLL2_LOCK_EINT */
+#define WM5100_IM_FLL2_LOCK_EINT_WIDTH 1 /* IM_FLL2_LOCK_EINT */
+#define WM5100_IM_FLL1_LOCK_EINT 0x0004 /* IM_FLL1_LOCK_EINT */
+#define WM5100_IM_FLL1_LOCK_EINT_MASK 0x0004 /* IM_FLL1_LOCK_EINT */
+#define WM5100_IM_FLL1_LOCK_EINT_SHIFT 2 /* IM_FLL1_LOCK_EINT */
+#define WM5100_IM_FLL1_LOCK_EINT_WIDTH 1 /* IM_FLL1_LOCK_EINT */
+#define WM5100_IM_CLKGEN_ERR_EINT 0x0002 /* IM_CLKGEN_ERR_EINT */
+#define WM5100_IM_CLKGEN_ERR_EINT_MASK 0x0002 /* IM_CLKGEN_ERR_EINT */
+#define WM5100_IM_CLKGEN_ERR_EINT_SHIFT 1 /* IM_CLKGEN_ERR_EINT */
+#define WM5100_IM_CLKGEN_ERR_EINT_WIDTH 1 /* IM_CLKGEN_ERR_EINT */
+#define WM5100_IM_CLKGEN_ERR_ASYNC_EINT 0x0001 /* IM_CLKGEN_ERR_ASYNC_EINT */
+#define WM5100_IM_CLKGEN_ERR_ASYNC_EINT_MASK 0x0001 /* IM_CLKGEN_ERR_ASYNC_EINT */
+#define WM5100_IM_CLKGEN_ERR_ASYNC_EINT_SHIFT 0 /* IM_CLKGEN_ERR_ASYNC_EINT */
+#define WM5100_IM_CLKGEN_ERR_ASYNC_EINT_WIDTH 1 /* IM_CLKGEN_ERR_ASYNC_EINT */
+
+/*
+ * R3338 (0xD0A) - Interrupt Status 4 Mask
+ */
+#define WM5100_IM_AIF3_ERR_EINT 0x2000 /* IM_AIF3_ERR_EINT */
+#define WM5100_IM_AIF3_ERR_EINT_MASK 0x2000 /* IM_AIF3_ERR_EINT */
+#define WM5100_IM_AIF3_ERR_EINT_SHIFT 13 /* IM_AIF3_ERR_EINT */
+#define WM5100_IM_AIF3_ERR_EINT_WIDTH 1 /* IM_AIF3_ERR_EINT */
+#define WM5100_IM_AIF2_ERR_EINT 0x1000 /* IM_AIF2_ERR_EINT */
+#define WM5100_IM_AIF2_ERR_EINT_MASK 0x1000 /* IM_AIF2_ERR_EINT */
+#define WM5100_IM_AIF2_ERR_EINT_SHIFT 12 /* IM_AIF2_ERR_EINT */
+#define WM5100_IM_AIF2_ERR_EINT_WIDTH 1 /* IM_AIF2_ERR_EINT */
+#define WM5100_IM_AIF1_ERR_EINT 0x0800 /* IM_AIF1_ERR_EINT */
+#define WM5100_IM_AIF1_ERR_EINT_MASK 0x0800 /* IM_AIF1_ERR_EINT */
+#define WM5100_IM_AIF1_ERR_EINT_SHIFT 11 /* IM_AIF1_ERR_EINT */
+#define WM5100_IM_AIF1_ERR_EINT_WIDTH 1 /* IM_AIF1_ERR_EINT */
+#define WM5100_IM_CTRLIF_ERR_EINT 0x0400 /* IM_CTRLIF_ERR_EINT */
+#define WM5100_IM_CTRLIF_ERR_EINT_MASK 0x0400 /* IM_CTRLIF_ERR_EINT */
+#define WM5100_IM_CTRLIF_ERR_EINT_SHIFT 10 /* IM_CTRLIF_ERR_EINT */
+#define WM5100_IM_CTRLIF_ERR_EINT_WIDTH 1 /* IM_CTRLIF_ERR_EINT */
+#define WM5100_IM_ISRC2_UNDERCLOCKED_EINT 0x0200 /* IM_ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_IM_ISRC2_UNDERCLOCKED_EINT_MASK 0x0200 /* IM_ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_IM_ISRC2_UNDERCLOCKED_EINT_SHIFT 9 /* IM_ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_IM_ISRC2_UNDERCLOCKED_EINT_WIDTH 1 /* IM_ISRC2_UNDERCLOCKED_EINT */
+#define WM5100_IM_ISRC1_UNDERCLOCKED_EINT 0x0100 /* IM_ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_IM_ISRC1_UNDERCLOCKED_EINT_MASK 0x0100 /* IM_ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_IM_ISRC1_UNDERCLOCKED_EINT_SHIFT 8 /* IM_ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_IM_ISRC1_UNDERCLOCKED_EINT_WIDTH 1 /* IM_ISRC1_UNDERCLOCKED_EINT */
+#define WM5100_IM_FX_UNDERCLOCKED_EINT 0x0080 /* IM_FX_UNDERCLOCKED_EINT */
+#define WM5100_IM_FX_UNDERCLOCKED_EINT_MASK 0x0080 /* IM_FX_UNDERCLOCKED_EINT */
+#define WM5100_IM_FX_UNDERCLOCKED_EINT_SHIFT 7 /* IM_FX_UNDERCLOCKED_EINT */
+#define WM5100_IM_FX_UNDERCLOCKED_EINT_WIDTH 1 /* IM_FX_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF3_UNDERCLOCKED_EINT 0x0040 /* IM_AIF3_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF3_UNDERCLOCKED_EINT_MASK 0x0040 /* IM_AIF3_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF3_UNDERCLOCKED_EINT_SHIFT 6 /* IM_AIF3_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF3_UNDERCLOCKED_EINT_WIDTH 1 /* IM_AIF3_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF2_UNDERCLOCKED_EINT 0x0020 /* IM_AIF2_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF2_UNDERCLOCKED_EINT_MASK 0x0020 /* IM_AIF2_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF2_UNDERCLOCKED_EINT_SHIFT 5 /* IM_AIF2_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF2_UNDERCLOCKED_EINT_WIDTH 1 /* IM_AIF2_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF1_UNDERCLOCKED_EINT 0x0010 /* IM_AIF1_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF1_UNDERCLOCKED_EINT_MASK 0x0010 /* IM_AIF1_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF1_UNDERCLOCKED_EINT_SHIFT 4 /* IM_AIF1_UNDERCLOCKED_EINT */
+#define WM5100_IM_AIF1_UNDERCLOCKED_EINT_WIDTH 1 /* IM_AIF1_UNDERCLOCKED_EINT */
+#define WM5100_IM_ASRC_UNDERCLOCKED_EINT 0x0008 /* IM_ASRC_UNDERCLOCKED_EINT */
+#define WM5100_IM_ASRC_UNDERCLOCKED_EINT_MASK 0x0008 /* IM_ASRC_UNDERCLOCKED_EINT */
+#define WM5100_IM_ASRC_UNDERCLOCKED_EINT_SHIFT 3 /* IM_ASRC_UNDERCLOCKED_EINT */
+#define WM5100_IM_ASRC_UNDERCLOCKED_EINT_WIDTH 1 /* IM_ASRC_UNDERCLOCKED_EINT */
+#define WM5100_IM_DAC_UNDERCLOCKED_EINT 0x0004 /* IM_DAC_UNDERCLOCKED_EINT */
+#define WM5100_IM_DAC_UNDERCLOCKED_EINT_MASK 0x0004 /* IM_DAC_UNDERCLOCKED_EINT */
+#define WM5100_IM_DAC_UNDERCLOCKED_EINT_SHIFT 2 /* IM_DAC_UNDERCLOCKED_EINT */
+#define WM5100_IM_DAC_UNDERCLOCKED_EINT_WIDTH 1 /* IM_DAC_UNDERCLOCKED_EINT */
+#define WM5100_IM_ADC_UNDERCLOCKED_EINT 0x0002 /* IM_ADC_UNDERCLOCKED_EINT */
+#define WM5100_IM_ADC_UNDERCLOCKED_EINT_MASK 0x0002 /* IM_ADC_UNDERCLOCKED_EINT */
+#define WM5100_IM_ADC_UNDERCLOCKED_EINT_SHIFT 1 /* IM_ADC_UNDERCLOCKED_EINT */
+#define WM5100_IM_ADC_UNDERCLOCKED_EINT_WIDTH 1 /* IM_ADC_UNDERCLOCKED_EINT */
+#define WM5100_IM_MIXER_UNDERCLOCKED_EINT 0x0001 /* IM_MIXER_UNDERCLOCKED_EINT */
+#define WM5100_IM_MIXER_UNDERCLOCKED_EINT_MASK 0x0001 /* IM_MIXER_UNDERCLOCKED_EINT */
+#define WM5100_IM_MIXER_UNDERCLOCKED_EINT_SHIFT 0 /* IM_MIXER_UNDERCLOCKED_EINT */
+#define WM5100_IM_MIXER_UNDERCLOCKED_EINT_WIDTH 1 /* IM_MIXER_UNDERCLOCKED_EINT */
+
+/*
+ * R3359 (0xD1F) - Interrupt Control
+ */
+#define WM5100_IM_IRQ 0x0001 /* IM_IRQ */
+#define WM5100_IM_IRQ_MASK 0x0001 /* IM_IRQ */
+#define WM5100_IM_IRQ_SHIFT 0 /* IM_IRQ */
+#define WM5100_IM_IRQ_WIDTH 1 /* IM_IRQ */
+
+/*
+ * R3360 (0xD20) - IRQ Debounce 1
+ */
+#define WM5100_SPK_SHUTDOWN_WARN_DB 0x0200 /* SPK_SHUTDOWN_WARN_DB */
+#define WM5100_SPK_SHUTDOWN_WARN_DB_MASK 0x0200 /* SPK_SHUTDOWN_WARN_DB */
+#define WM5100_SPK_SHUTDOWN_WARN_DB_SHIFT 9 /* SPK_SHUTDOWN_WARN_DB */
+#define WM5100_SPK_SHUTDOWN_WARN_DB_WIDTH 1 /* SPK_SHUTDOWN_WARN_DB */
+#define WM5100_SPK_SHUTDOWN_DB 0x0100 /* SPK_SHUTDOWN_DB */
+#define WM5100_SPK_SHUTDOWN_DB_MASK 0x0100 /* SPK_SHUTDOWN_DB */
+#define WM5100_SPK_SHUTDOWN_DB_SHIFT 8 /* SPK_SHUTDOWN_DB */
+#define WM5100_SPK_SHUTDOWN_DB_WIDTH 1 /* SPK_SHUTDOWN_DB */
+#define WM5100_FLL1_LOCK_IRQ_DB 0x0008 /* FLL1_LOCK_IRQ_DB */
+#define WM5100_FLL1_LOCK_IRQ_DB_MASK 0x0008 /* FLL1_LOCK_IRQ_DB */
+#define WM5100_FLL1_LOCK_IRQ_DB_SHIFT 3 /* FLL1_LOCK_IRQ_DB */
+#define WM5100_FLL1_LOCK_IRQ_DB_WIDTH 1 /* FLL1_LOCK_IRQ_DB */
+#define WM5100_FLL2_LOCK_IRQ_DB 0x0004 /* FLL2_LOCK_IRQ_DB */
+#define WM5100_FLL2_LOCK_IRQ_DB_MASK 0x0004 /* FLL2_LOCK_IRQ_DB */
+#define WM5100_FLL2_LOCK_IRQ_DB_SHIFT 2 /* FLL2_LOCK_IRQ_DB */
+#define WM5100_FLL2_LOCK_IRQ_DB_WIDTH 1 /* FLL2_LOCK_IRQ_DB */
+#define WM5100_CLKGEN_ERR_IRQ_DB 0x0002 /* CLKGEN_ERR_IRQ_DB */
+#define WM5100_CLKGEN_ERR_IRQ_DB_MASK 0x0002 /* CLKGEN_ERR_IRQ_DB */
+#define WM5100_CLKGEN_ERR_IRQ_DB_SHIFT 1 /* CLKGEN_ERR_IRQ_DB */
+#define WM5100_CLKGEN_ERR_IRQ_DB_WIDTH 1 /* CLKGEN_ERR_IRQ_DB */
+#define WM5100_CLKGEN_ERR_ASYNC_IRQ_DB 0x0001 /* CLKGEN_ERR_ASYNC_IRQ_DB */
+#define WM5100_CLKGEN_ERR_ASYNC_IRQ_DB_MASK 0x0001 /* CLKGEN_ERR_ASYNC_IRQ_DB */
+#define WM5100_CLKGEN_ERR_ASYNC_IRQ_DB_SHIFT 0 /* CLKGEN_ERR_ASYNC_IRQ_DB */
+#define WM5100_CLKGEN_ERR_ASYNC_IRQ_DB_WIDTH 1 /* CLKGEN_ERR_ASYNC_IRQ_DB */
+
+/*
+ * R3361 (0xD21) - IRQ Debounce 2
+ */
+#define WM5100_AIF_ERR_DB 0x0001 /* AIF_ERR_DB */
+#define WM5100_AIF_ERR_DB_MASK 0x0001 /* AIF_ERR_DB */
+#define WM5100_AIF_ERR_DB_SHIFT 0 /* AIF_ERR_DB */
+#define WM5100_AIF_ERR_DB_WIDTH 1 /* AIF_ERR_DB */
+
+/*
+ * R3584 (0xE00) - FX_Ctrl
+ */
+#define WM5100_FX_STS_MASK 0xFFC0 /* FX_STS - [15:6] */
+#define WM5100_FX_STS_SHIFT 6 /* FX_STS - [15:6] */
+#define WM5100_FX_STS_WIDTH 10 /* FX_STS - [15:6] */
+#define WM5100_FX_RATE_MASK 0x0003 /* FX_RATE - [1:0] */
+#define WM5100_FX_RATE_SHIFT 0 /* FX_RATE - [1:0] */
+#define WM5100_FX_RATE_WIDTH 2 /* FX_RATE - [1:0] */
+
+/*
+ * R3600 (0xE10) - EQ1_1
+ */
+#define WM5100_EQ1_B1_GAIN_MASK 0xF800 /* EQ1_B1_GAIN - [15:11] */
+#define WM5100_EQ1_B1_GAIN_SHIFT 11 /* EQ1_B1_GAIN - [15:11] */
+#define WM5100_EQ1_B1_GAIN_WIDTH 5 /* EQ1_B1_GAIN - [15:11] */
+#define WM5100_EQ1_B2_GAIN_MASK 0x07C0 /* EQ1_B2_GAIN - [10:6] */
+#define WM5100_EQ1_B2_GAIN_SHIFT 6 /* EQ1_B2_GAIN - [10:6] */
+#define WM5100_EQ1_B2_GAIN_WIDTH 5 /* EQ1_B2_GAIN - [10:6] */
+#define WM5100_EQ1_B3_GAIN_MASK 0x003E /* EQ1_B3_GAIN - [5:1] */
+#define WM5100_EQ1_B3_GAIN_SHIFT 1 /* EQ1_B3_GAIN - [5:1] */
+#define WM5100_EQ1_B3_GAIN_WIDTH 5 /* EQ1_B3_GAIN - [5:1] */
+#define WM5100_EQ1_ENA 0x0001 /* EQ1_ENA */
+#define WM5100_EQ1_ENA_MASK 0x0001 /* EQ1_ENA */
+#define WM5100_EQ1_ENA_SHIFT 0 /* EQ1_ENA */
+#define WM5100_EQ1_ENA_WIDTH 1 /* EQ1_ENA */
+
+/*
+ * R3601 (0xE11) - EQ1_2
+ */
+#define WM5100_EQ1_B4_GAIN_MASK 0xF800 /* EQ1_B4_GAIN - [15:11] */
+#define WM5100_EQ1_B4_GAIN_SHIFT 11 /* EQ1_B4_GAIN - [15:11] */
+#define WM5100_EQ1_B4_GAIN_WIDTH 5 /* EQ1_B4_GAIN - [15:11] */
+#define WM5100_EQ1_B5_GAIN_MASK 0x07C0 /* EQ1_B5_GAIN - [10:6] */
+#define WM5100_EQ1_B5_GAIN_SHIFT 6 /* EQ1_B5_GAIN - [10:6] */
+#define WM5100_EQ1_B5_GAIN_WIDTH 5 /* EQ1_B5_GAIN - [10:6] */
+
+/*
+ * R3602 (0xE12) - EQ1_3
+ */
+#define WM5100_EQ1_B1_A_MASK 0xFFFF /* EQ1_B1_A - [15:0] */
+#define WM5100_EQ1_B1_A_SHIFT 0 /* EQ1_B1_A - [15:0] */
+#define WM5100_EQ1_B1_A_WIDTH 16 /* EQ1_B1_A - [15:0] */
+
+/*
+ * R3603 (0xE13) - EQ1_4
+ */
+#define WM5100_EQ1_B1_B_MASK 0xFFFF /* EQ1_B1_B - [15:0] */
+#define WM5100_EQ1_B1_B_SHIFT 0 /* EQ1_B1_B - [15:0] */
+#define WM5100_EQ1_B1_B_WIDTH 16 /* EQ1_B1_B - [15:0] */
+
+/*
+ * R3604 (0xE14) - EQ1_5
+ */
+#define WM5100_EQ1_B1_PG_MASK 0xFFFF /* EQ1_B1_PG - [15:0] */
+#define WM5100_EQ1_B1_PG_SHIFT 0 /* EQ1_B1_PG - [15:0] */
+#define WM5100_EQ1_B1_PG_WIDTH 16 /* EQ1_B1_PG - [15:0] */
+
+/*
+ * R3605 (0xE15) - EQ1_6
+ */
+#define WM5100_EQ1_B2_A_MASK 0xFFFF /* EQ1_B2_A - [15:0] */
+#define WM5100_EQ1_B2_A_SHIFT 0 /* EQ1_B2_A - [15:0] */
+#define WM5100_EQ1_B2_A_WIDTH 16 /* EQ1_B2_A - [15:0] */
+
+/*
+ * R3606 (0xE16) - EQ1_7
+ */
+#define WM5100_EQ1_B2_B_MASK 0xFFFF /* EQ1_B2_B - [15:0] */
+#define WM5100_EQ1_B2_B_SHIFT 0 /* EQ1_B2_B - [15:0] */
+#define WM5100_EQ1_B2_B_WIDTH 16 /* EQ1_B2_B - [15:0] */
+
+/*
+ * R3607 (0xE17) - EQ1_8
+ */
+#define WM5100_EQ1_B2_C_MASK 0xFFFF /* EQ1_B2_C - [15:0] */
+#define WM5100_EQ1_B2_C_SHIFT 0 /* EQ1_B2_C - [15:0] */
+#define WM5100_EQ1_B2_C_WIDTH 16 /* EQ1_B2_C - [15:0] */
+
+/*
+ * R3608 (0xE18) - EQ1_9
+ */
+#define WM5100_EQ1_B2_PG_MASK 0xFFFF /* EQ1_B2_PG - [15:0] */
+#define WM5100_EQ1_B2_PG_SHIFT 0 /* EQ1_B2_PG - [15:0] */
+#define WM5100_EQ1_B2_PG_WIDTH 16 /* EQ1_B2_PG - [15:0] */
+
+/*
+ * R3609 (0xE19) - EQ1_10
+ */
+#define WM5100_EQ1_B3_A_MASK 0xFFFF /* EQ1_B3_A - [15:0] */
+#define WM5100_EQ1_B3_A_SHIFT 0 /* EQ1_B3_A - [15:0] */
+#define WM5100_EQ1_B3_A_WIDTH 16 /* EQ1_B3_A - [15:0] */
+
+/*
+ * R3610 (0xE1A) - EQ1_11
+ */
+#define WM5100_EQ1_B3_B_MASK 0xFFFF /* EQ1_B3_B - [15:0] */
+#define WM5100_EQ1_B3_B_SHIFT 0 /* EQ1_B3_B - [15:0] */
+#define WM5100_EQ1_B3_B_WIDTH 16 /* EQ1_B3_B - [15:0] */
+
+/*
+ * R3611 (0xE1B) - EQ1_12
+ */
+#define WM5100_EQ1_B3_C_MASK 0xFFFF /* EQ1_B3_C - [15:0] */
+#define WM5100_EQ1_B3_C_SHIFT 0 /* EQ1_B3_C - [15:0] */
+#define WM5100_EQ1_B3_C_WIDTH 16 /* EQ1_B3_C - [15:0] */
+
+/*
+ * R3612 (0xE1C) - EQ1_13
+ */
+#define WM5100_EQ1_B3_PG_MASK 0xFFFF /* EQ1_B3_PG - [15:0] */
+#define WM5100_EQ1_B3_PG_SHIFT 0 /* EQ1_B3_PG - [15:0] */
+#define WM5100_EQ1_B3_PG_WIDTH 16 /* EQ1_B3_PG - [15:0] */
+
+/*
+ * R3613 (0xE1D) - EQ1_14
+ */
+#define WM5100_EQ1_B4_A_MASK 0xFFFF /* EQ1_B4_A - [15:0] */
+#define WM5100_EQ1_B4_A_SHIFT 0 /* EQ1_B4_A - [15:0] */
+#define WM5100_EQ1_B4_A_WIDTH 16 /* EQ1_B4_A - [15:0] */
+
+/*
+ * R3614 (0xE1E) - EQ1_15
+ */
+#define WM5100_EQ1_B4_B_MASK 0xFFFF /* EQ1_B4_B - [15:0] */
+#define WM5100_EQ1_B4_B_SHIFT 0 /* EQ1_B4_B - [15:0] */
+#define WM5100_EQ1_B4_B_WIDTH 16 /* EQ1_B4_B - [15:0] */
+
+/*
+ * R3615 (0xE1F) - EQ1_16
+ */
+#define WM5100_EQ1_B4_C_MASK 0xFFFF /* EQ1_B4_C - [15:0] */
+#define WM5100_EQ1_B4_C_SHIFT 0 /* EQ1_B4_C - [15:0] */
+#define WM5100_EQ1_B4_C_WIDTH 16 /* EQ1_B4_C - [15:0] */
+
+/*
+ * R3616 (0xE20) - EQ1_17
+ */
+#define WM5100_EQ1_B4_PG_MASK 0xFFFF /* EQ1_B4_PG - [15:0] */
+#define WM5100_EQ1_B4_PG_SHIFT 0 /* EQ1_B4_PG - [15:0] */
+#define WM5100_EQ1_B4_PG_WIDTH 16 /* EQ1_B4_PG - [15:0] */
+
+/*
+ * R3617 (0xE21) - EQ1_18
+ */
+#define WM5100_EQ1_B5_A_MASK 0xFFFF /* EQ1_B5_A - [15:0] */
+#define WM5100_EQ1_B5_A_SHIFT 0 /* EQ1_B5_A - [15:0] */
+#define WM5100_EQ1_B5_A_WIDTH 16 /* EQ1_B5_A - [15:0] */
+
+/*
+ * R3618 (0xE22) - EQ1_19
+ */
+#define WM5100_EQ1_B5_B_MASK 0xFFFF /* EQ1_B5_B - [15:0] */
+#define WM5100_EQ1_B5_B_SHIFT 0 /* EQ1_B5_B - [15:0] */
+#define WM5100_EQ1_B5_B_WIDTH 16 /* EQ1_B5_B - [15:0] */
+
+/*
+ * R3619 (0xE23) - EQ1_20
+ */
+#define WM5100_EQ1_B5_PG_MASK 0xFFFF /* EQ1_B5_PG - [15:0] */
+#define WM5100_EQ1_B5_PG_SHIFT 0 /* EQ1_B5_PG - [15:0] */
+#define WM5100_EQ1_B5_PG_WIDTH 16 /* EQ1_B5_PG - [15:0] */
+
+/*
+ * R3622 (0xE26) - EQ2_1
+ */
+#define WM5100_EQ2_B1_GAIN_MASK 0xF800 /* EQ2_B1_GAIN - [15:11] */
+#define WM5100_EQ2_B1_GAIN_SHIFT 11 /* EQ2_B1_GAIN - [15:11] */
+#define WM5100_EQ2_B1_GAIN_WIDTH 5 /* EQ2_B1_GAIN - [15:11] */
+#define WM5100_EQ2_B2_GAIN_MASK 0x07C0 /* EQ2_B2_GAIN - [10:6] */
+#define WM5100_EQ2_B2_GAIN_SHIFT 6 /* EQ2_B2_GAIN - [10:6] */
+#define WM5100_EQ2_B2_GAIN_WIDTH 5 /* EQ2_B2_GAIN - [10:6] */
+#define WM5100_EQ2_B3_GAIN_MASK 0x003E /* EQ2_B3_GAIN - [5:1] */
+#define WM5100_EQ2_B3_GAIN_SHIFT 1 /* EQ2_B3_GAIN - [5:1] */
+#define WM5100_EQ2_B3_GAIN_WIDTH 5 /* EQ2_B3_GAIN - [5:1] */
+#define WM5100_EQ2_ENA 0x0001 /* EQ2_ENA */
+#define WM5100_EQ2_ENA_MASK 0x0001 /* EQ2_ENA */
+#define WM5100_EQ2_ENA_SHIFT 0 /* EQ2_ENA */
+#define WM5100_EQ2_ENA_WIDTH 1 /* EQ2_ENA */
+
+/*
+ * R3623 (0xE27) - EQ2_2
+ */
+#define WM5100_EQ2_B4_GAIN_MASK 0xF800 /* EQ2_B4_GAIN - [15:11] */
+#define WM5100_EQ2_B4_GAIN_SHIFT 11 /* EQ2_B4_GAIN - [15:11] */
+#define WM5100_EQ2_B4_GAIN_WIDTH 5 /* EQ2_B4_GAIN - [15:11] */
+#define WM5100_EQ2_B5_GAIN_MASK 0x07C0 /* EQ2_B5_GAIN - [10:6] */
+#define WM5100_EQ2_B5_GAIN_SHIFT 6 /* EQ2_B5_GAIN - [10:6] */
+#define WM5100_EQ2_B5_GAIN_WIDTH 5 /* EQ2_B5_GAIN - [10:6] */
+
+/*
+ * R3624 (0xE28) - EQ2_3
+ */
+#define WM5100_EQ2_B1_A_MASK 0xFFFF /* EQ2_B1_A - [15:0] */
+#define WM5100_EQ2_B1_A_SHIFT 0 /* EQ2_B1_A - [15:0] */
+#define WM5100_EQ2_B1_A_WIDTH 16 /* EQ2_B1_A - [15:0] */
+
+/*
+ * R3625 (0xE29) - EQ2_4
+ */
+#define WM5100_EQ2_B1_B_MASK 0xFFFF /* EQ2_B1_B - [15:0] */
+#define WM5100_EQ2_B1_B_SHIFT 0 /* EQ2_B1_B - [15:0] */
+#define WM5100_EQ2_B1_B_WIDTH 16 /* EQ2_B1_B - [15:0] */
+
+/*
+ * R3626 (0xE2A) - EQ2_5
+ */
+#define WM5100_EQ2_B1_PG_MASK 0xFFFF /* EQ2_B1_PG - [15:0] */
+#define WM5100_EQ2_B1_PG_SHIFT 0 /* EQ2_B1_PG - [15:0] */
+#define WM5100_EQ2_B1_PG_WIDTH 16 /* EQ2_B1_PG - [15:0] */
+
+/*
+ * R3627 (0xE2B) - EQ2_6
+ */
+#define WM5100_EQ2_B2_A_MASK 0xFFFF /* EQ2_B2_A - [15:0] */
+#define WM5100_EQ2_B2_A_SHIFT 0 /* EQ2_B2_A - [15:0] */
+#define WM5100_EQ2_B2_A_WIDTH 16 /* EQ2_B2_A - [15:0] */
+
+/*
+ * R3628 (0xE2C) - EQ2_7
+ */
+#define WM5100_EQ2_B2_B_MASK 0xFFFF /* EQ2_B2_B - [15:0] */
+#define WM5100_EQ2_B2_B_SHIFT 0 /* EQ2_B2_B - [15:0] */
+#define WM5100_EQ2_B2_B_WIDTH 16 /* EQ2_B2_B - [15:0] */
+
+/*
+ * R3629 (0xE2D) - EQ2_8
+ */
+#define WM5100_EQ2_B2_C_MASK 0xFFFF /* EQ2_B2_C - [15:0] */
+#define WM5100_EQ2_B2_C_SHIFT 0 /* EQ2_B2_C - [15:0] */
+#define WM5100_EQ2_B2_C_WIDTH 16 /* EQ2_B2_C - [15:0] */
+
+/*
+ * R3630 (0xE2E) - EQ2_9
+ */
+#define WM5100_EQ2_B2_PG_MASK 0xFFFF /* EQ2_B2_PG - [15:0] */
+#define WM5100_EQ2_B2_PG_SHIFT 0 /* EQ2_B2_PG - [15:0] */
+#define WM5100_EQ2_B2_PG_WIDTH 16 /* EQ2_B2_PG - [15:0] */
+
+/*
+ * R3631 (0xE2F) - EQ2_10
+ */
+#define WM5100_EQ2_B3_A_MASK 0xFFFF /* EQ2_B3_A - [15:0] */
+#define WM5100_EQ2_B3_A_SHIFT 0 /* EQ2_B3_A - [15:0] */
+#define WM5100_EQ2_B3_A_WIDTH 16 /* EQ2_B3_A - [15:0] */
+
+/*
+ * R3632 (0xE30) - EQ2_11
+ */
+#define WM5100_EQ2_B3_B_MASK 0xFFFF /* EQ2_B3_B - [15:0] */
+#define WM5100_EQ2_B3_B_SHIFT 0 /* EQ2_B3_B - [15:0] */
+#define WM5100_EQ2_B3_B_WIDTH 16 /* EQ2_B3_B - [15:0] */
+
+/*
+ * R3633 (0xE31) - EQ2_12
+ */
+#define WM5100_EQ2_B3_C_MASK 0xFFFF /* EQ2_B3_C - [15:0] */
+#define WM5100_EQ2_B3_C_SHIFT 0 /* EQ2_B3_C - [15:0] */
+#define WM5100_EQ2_B3_C_WIDTH 16 /* EQ2_B3_C - [15:0] */
+
+/*
+ * R3634 (0xE32) - EQ2_13
+ */
+#define WM5100_EQ2_B3_PG_MASK 0xFFFF /* EQ2_B3_PG - [15:0] */
+#define WM5100_EQ2_B3_PG_SHIFT 0 /* EQ2_B3_PG - [15:0] */
+#define WM5100_EQ2_B3_PG_WIDTH 16 /* EQ2_B3_PG - [15:0] */
+
+/*
+ * R3635 (0xE33) - EQ2_14
+ */
+#define WM5100_EQ2_B4_A_MASK 0xFFFF /* EQ2_B4_A - [15:0] */
+#define WM5100_EQ2_B4_A_SHIFT 0 /* EQ2_B4_A - [15:0] */
+#define WM5100_EQ2_B4_A_WIDTH 16 /* EQ2_B4_A - [15:0] */
+
+/*
+ * R3636 (0xE34) - EQ2_15
+ */
+#define WM5100_EQ2_B4_B_MASK 0xFFFF /* EQ2_B4_B - [15:0] */
+#define WM5100_EQ2_B4_B_SHIFT 0 /* EQ2_B4_B - [15:0] */
+#define WM5100_EQ2_B4_B_WIDTH 16 /* EQ2_B4_B - [15:0] */
+
+/*
+ * R3637 (0xE35) - EQ2_16
+ */
+#define WM5100_EQ2_B4_C_MASK 0xFFFF /* EQ2_B4_C - [15:0] */
+#define WM5100_EQ2_B4_C_SHIFT 0 /* EQ2_B4_C - [15:0] */
+#define WM5100_EQ2_B4_C_WIDTH 16 /* EQ2_B4_C - [15:0] */
+
+/*
+ * R3638 (0xE36) - EQ2_17
+ */
+#define WM5100_EQ2_B4_PG_MASK 0xFFFF /* EQ2_B4_PG - [15:0] */
+#define WM5100_EQ2_B4_PG_SHIFT 0 /* EQ2_B4_PG - [15:0] */
+#define WM5100_EQ2_B4_PG_WIDTH 16 /* EQ2_B4_PG - [15:0] */
+
+/*
+ * R3639 (0xE37) - EQ2_18
+ */
+#define WM5100_EQ2_B5_A_MASK 0xFFFF /* EQ2_B5_A - [15:0] */
+#define WM5100_EQ2_B5_A_SHIFT 0 /* EQ2_B5_A - [15:0] */
+#define WM5100_EQ2_B5_A_WIDTH 16 /* EQ2_B5_A - [15:0] */
+
+/*
+ * R3640 (0xE38) - EQ2_19
+ */
+#define WM5100_EQ2_B5_B_MASK 0xFFFF /* EQ2_B5_B - [15:0] */
+#define WM5100_EQ2_B5_B_SHIFT 0 /* EQ2_B5_B - [15:0] */
+#define WM5100_EQ2_B5_B_WIDTH 16 /* EQ2_B5_B - [15:0] */
+
+/*
+ * R3641 (0xE39) - EQ2_20
+ */
+#define WM5100_EQ2_B5_PG_MASK 0xFFFF /* EQ2_B5_PG - [15:0] */
+#define WM5100_EQ2_B5_PG_SHIFT 0 /* EQ2_B5_PG - [15:0] */
+#define WM5100_EQ2_B5_PG_WIDTH 16 /* EQ2_B5_PG - [15:0] */
+
+/*
+ * R3644 (0xE3C) - EQ3_1
+ */
+#define WM5100_EQ3_B1_GAIN_MASK 0xF800 /* EQ3_B1_GAIN - [15:11] */
+#define WM5100_EQ3_B1_GAIN_SHIFT 11 /* EQ3_B1_GAIN - [15:11] */
+#define WM5100_EQ3_B1_GAIN_WIDTH 5 /* EQ3_B1_GAIN - [15:11] */
+#define WM5100_EQ3_B2_GAIN_MASK 0x07C0 /* EQ3_B2_GAIN - [10:6] */
+#define WM5100_EQ3_B2_GAIN_SHIFT 6 /* EQ3_B2_GAIN - [10:6] */
+#define WM5100_EQ3_B2_GAIN_WIDTH 5 /* EQ3_B2_GAIN - [10:6] */
+#define WM5100_EQ3_B3_GAIN_MASK 0x003E /* EQ3_B3_GAIN - [5:1] */
+#define WM5100_EQ3_B3_GAIN_SHIFT 1 /* EQ3_B3_GAIN - [5:1] */
+#define WM5100_EQ3_B3_GAIN_WIDTH 5 /* EQ3_B3_GAIN - [5:1] */
+#define WM5100_EQ3_ENA 0x0001 /* EQ3_ENA */
+#define WM5100_EQ3_ENA_MASK 0x0001 /* EQ3_ENA */
+#define WM5100_EQ3_ENA_SHIFT 0 /* EQ3_ENA */
+#define WM5100_EQ3_ENA_WIDTH 1 /* EQ3_ENA */
+
+/*
+ * R3645 (0xE3D) - EQ3_2
+ */
+#define WM5100_EQ3_B4_GAIN_MASK 0xF800 /* EQ3_B4_GAIN - [15:11] */
+#define WM5100_EQ3_B4_GAIN_SHIFT 11 /* EQ3_B4_GAIN - [15:11] */
+#define WM5100_EQ3_B4_GAIN_WIDTH 5 /* EQ3_B4_GAIN - [15:11] */
+#define WM5100_EQ3_B5_GAIN_MASK 0x07C0 /* EQ3_B5_GAIN - [10:6] */
+#define WM5100_EQ3_B5_GAIN_SHIFT 6 /* EQ3_B5_GAIN - [10:6] */
+#define WM5100_EQ3_B5_GAIN_WIDTH 5 /* EQ3_B5_GAIN - [10:6] */
+
+/*
+ * R3646 (0xE3E) - EQ3_3
+ */
+#define WM5100_EQ3_B1_A_MASK 0xFFFF /* EQ3_B1_A - [15:0] */
+#define WM5100_EQ3_B1_A_SHIFT 0 /* EQ3_B1_A - [15:0] */
+#define WM5100_EQ3_B1_A_WIDTH 16 /* EQ3_B1_A - [15:0] */
+
+/*
+ * R3647 (0xE3F) - EQ3_4
+ */
+#define WM5100_EQ3_B1_B_MASK 0xFFFF /* EQ3_B1_B - [15:0] */
+#define WM5100_EQ3_B1_B_SHIFT 0 /* EQ3_B1_B - [15:0] */
+#define WM5100_EQ3_B1_B_WIDTH 16 /* EQ3_B1_B - [15:0] */
+
+/*
+ * R3648 (0xE40) - EQ3_5
+ */
+#define WM5100_EQ3_B1_PG_MASK 0xFFFF /* EQ3_B1_PG - [15:0] */
+#define WM5100_EQ3_B1_PG_SHIFT 0 /* EQ3_B1_PG - [15:0] */
+#define WM5100_EQ3_B1_PG_WIDTH 16 /* EQ3_B1_PG - [15:0] */
+
+/*
+ * R3649 (0xE41) - EQ3_6
+ */
+#define WM5100_EQ3_B2_A_MASK 0xFFFF /* EQ3_B2_A - [15:0] */
+#define WM5100_EQ3_B2_A_SHIFT 0 /* EQ3_B2_A - [15:0] */
+#define WM5100_EQ3_B2_A_WIDTH 16 /* EQ3_B2_A - [15:0] */
+
+/*
+ * R3650 (0xE42) - EQ3_7
+ */
+#define WM5100_EQ3_B2_B_MASK 0xFFFF /* EQ3_B2_B - [15:0] */
+#define WM5100_EQ3_B2_B_SHIFT 0 /* EQ3_B2_B - [15:0] */
+#define WM5100_EQ3_B2_B_WIDTH 16 /* EQ3_B2_B - [15:0] */
+
+/*
+ * R3651 (0xE43) - EQ3_8
+ */
+#define WM5100_EQ3_B2_C_MASK 0xFFFF /* EQ3_B2_C - [15:0] */
+#define WM5100_EQ3_B2_C_SHIFT 0 /* EQ3_B2_C - [15:0] */
+#define WM5100_EQ3_B2_C_WIDTH 16 /* EQ3_B2_C - [15:0] */
+
+/*
+ * R3652 (0xE44) - EQ3_9
+ */
+#define WM5100_EQ3_B2_PG_MASK 0xFFFF /* EQ3_B2_PG - [15:0] */
+#define WM5100_EQ3_B2_PG_SHIFT 0 /* EQ3_B2_PG - [15:0] */
+#define WM5100_EQ3_B2_PG_WIDTH 16 /* EQ3_B2_PG - [15:0] */
+
+/*
+ * R3653 (0xE45) - EQ3_10
+ */
+#define WM5100_EQ3_B3_A_MASK 0xFFFF /* EQ3_B3_A - [15:0] */
+#define WM5100_EQ3_B3_A_SHIFT 0 /* EQ3_B3_A - [15:0] */
+#define WM5100_EQ3_B3_A_WIDTH 16 /* EQ3_B3_A - [15:0] */
+
+/*
+ * R3654 (0xE46) - EQ3_11
+ */
+#define WM5100_EQ3_B3_B_MASK 0xFFFF /* EQ3_B3_B - [15:0] */
+#define WM5100_EQ3_B3_B_SHIFT 0 /* EQ3_B3_B - [15:0] */
+#define WM5100_EQ3_B3_B_WIDTH 16 /* EQ3_B3_B - [15:0] */
+
+/*
+ * R3655 (0xE47) - EQ3_12
+ */
+#define WM5100_EQ3_B3_C_MASK 0xFFFF /* EQ3_B3_C - [15:0] */
+#define WM5100_EQ3_B3_C_SHIFT 0 /* EQ3_B3_C - [15:0] */
+#define WM5100_EQ3_B3_C_WIDTH 16 /* EQ3_B3_C - [15:0] */
+
+/*
+ * R3656 (0xE48) - EQ3_13
+ */
+#define WM5100_EQ3_B3_PG_MASK 0xFFFF /* EQ3_B3_PG - [15:0] */
+#define WM5100_EQ3_B3_PG_SHIFT 0 /* EQ3_B3_PG - [15:0] */
+#define WM5100_EQ3_B3_PG_WIDTH 16 /* EQ3_B3_PG - [15:0] */
+
+/*
+ * R3657 (0xE49) - EQ3_14
+ */
+#define WM5100_EQ3_B4_A_MASK 0xFFFF /* EQ3_B4_A - [15:0] */
+#define WM5100_EQ3_B4_A_SHIFT 0 /* EQ3_B4_A - [15:0] */
+#define WM5100_EQ3_B4_A_WIDTH 16 /* EQ3_B4_A - [15:0] */
+
+/*
+ * R3658 (0xE4A) - EQ3_15
+ */
+#define WM5100_EQ3_B4_B_MASK 0xFFFF /* EQ3_B4_B - [15:0] */
+#define WM5100_EQ3_B4_B_SHIFT 0 /* EQ3_B4_B - [15:0] */
+#define WM5100_EQ3_B4_B_WIDTH 16 /* EQ3_B4_B - [15:0] */
+
+/*
+ * R3659 (0xE4B) - EQ3_16
+ */
+#define WM5100_EQ3_B4_C_MASK 0xFFFF /* EQ3_B4_C - [15:0] */
+#define WM5100_EQ3_B4_C_SHIFT 0 /* EQ3_B4_C - [15:0] */
+#define WM5100_EQ3_B4_C_WIDTH 16 /* EQ3_B4_C - [15:0] */
+
+/*
+ * R3660 (0xE4C) - EQ3_17
+ */
+#define WM5100_EQ3_B4_PG_MASK 0xFFFF /* EQ3_B4_PG - [15:0] */
+#define WM5100_EQ3_B4_PG_SHIFT 0 /* EQ3_B4_PG - [15:0] */
+#define WM5100_EQ3_B4_PG_WIDTH 16 /* EQ3_B4_PG - [15:0] */
+
+/*
+ * R3661 (0xE4D) - EQ3_18
+ */
+#define WM5100_EQ3_B5_A_MASK 0xFFFF /* EQ3_B5_A - [15:0] */
+#define WM5100_EQ3_B5_A_SHIFT 0 /* EQ3_B5_A - [15:0] */
+#define WM5100_EQ3_B5_A_WIDTH 16 /* EQ3_B5_A - [15:0] */
+
+/*
+ * R3662 (0xE4E) - EQ3_19
+ */
+#define WM5100_EQ3_B5_B_MASK 0xFFFF /* EQ3_B5_B - [15:0] */
+#define WM5100_EQ3_B5_B_SHIFT 0 /* EQ3_B5_B - [15:0] */
+#define WM5100_EQ3_B5_B_WIDTH 16 /* EQ3_B5_B - [15:0] */
+
+/*
+ * R3663 (0xE4F) - EQ3_20
+ */
+#define WM5100_EQ3_B5_PG_MASK 0xFFFF /* EQ3_B5_PG - [15:0] */
+#define WM5100_EQ3_B5_PG_SHIFT 0 /* EQ3_B5_PG - [15:0] */
+#define WM5100_EQ3_B5_PG_WIDTH 16 /* EQ3_B5_PG - [15:0] */
+
+/*
+ * R3666 (0xE52) - EQ4_1
+ */
+#define WM5100_EQ4_B1_GAIN_MASK 0xF800 /* EQ4_B1_GAIN - [15:11] */
+#define WM5100_EQ4_B1_GAIN_SHIFT 11 /* EQ4_B1_GAIN - [15:11] */
+#define WM5100_EQ4_B1_GAIN_WIDTH 5 /* EQ4_B1_GAIN - [15:11] */
+#define WM5100_EQ4_B2_GAIN_MASK 0x07C0 /* EQ4_B2_GAIN - [10:6] */
+#define WM5100_EQ4_B2_GAIN_SHIFT 6 /* EQ4_B2_GAIN - [10:6] */
+#define WM5100_EQ4_B2_GAIN_WIDTH 5 /* EQ4_B2_GAIN - [10:6] */
+#define WM5100_EQ4_B3_GAIN_MASK 0x003E /* EQ4_B3_GAIN - [5:1] */
+#define WM5100_EQ4_B3_GAIN_SHIFT 1 /* EQ4_B3_GAIN - [5:1] */
+#define WM5100_EQ4_B3_GAIN_WIDTH 5 /* EQ4_B3_GAIN - [5:1] */
+#define WM5100_EQ4_ENA 0x0001 /* EQ4_ENA */
+#define WM5100_EQ4_ENA_MASK 0x0001 /* EQ4_ENA */
+#define WM5100_EQ4_ENA_SHIFT 0 /* EQ4_ENA */
+#define WM5100_EQ4_ENA_WIDTH 1 /* EQ4_ENA */
+
+/*
+ * R3667 (0xE53) - EQ4_2
+ */
+#define WM5100_EQ4_B4_GAIN_MASK 0xF800 /* EQ4_B4_GAIN - [15:11] */
+#define WM5100_EQ4_B4_GAIN_SHIFT 11 /* EQ4_B4_GAIN - [15:11] */
+#define WM5100_EQ4_B4_GAIN_WIDTH 5 /* EQ4_B4_GAIN - [15:11] */
+#define WM5100_EQ4_B5_GAIN_MASK 0x07C0 /* EQ4_B5_GAIN - [10:6] */
+#define WM5100_EQ4_B5_GAIN_SHIFT 6 /* EQ4_B5_GAIN - [10:6] */
+#define WM5100_EQ4_B5_GAIN_WIDTH 5 /* EQ4_B5_GAIN - [10:6] */
+
+/*
+ * R3668 (0xE54) - EQ4_3
+ */
+#define WM5100_EQ4_B1_A_MASK 0xFFFF /* EQ4_B1_A - [15:0] */
+#define WM5100_EQ4_B1_A_SHIFT 0 /* EQ4_B1_A - [15:0] */
+#define WM5100_EQ4_B1_A_WIDTH 16 /* EQ4_B1_A - [15:0] */
+
+/*
+ * R3669 (0xE55) - EQ4_4
+ */
+#define WM5100_EQ4_B1_B_MASK 0xFFFF /* EQ4_B1_B - [15:0] */
+#define WM5100_EQ4_B1_B_SHIFT 0 /* EQ4_B1_B - [15:0] */
+#define WM5100_EQ4_B1_B_WIDTH 16 /* EQ4_B1_B - [15:0] */
+
+/*
+ * R3670 (0xE56) - EQ4_5
+ */
+#define WM5100_EQ4_B1_PG_MASK 0xFFFF /* EQ4_B1_PG - [15:0] */
+#define WM5100_EQ4_B1_PG_SHIFT 0 /* EQ4_B1_PG - [15:0] */
+#define WM5100_EQ4_B1_PG_WIDTH 16 /* EQ4_B1_PG - [15:0] */
+
+/*
+ * R3671 (0xE57) - EQ4_6
+ */
+#define WM5100_EQ4_B2_A_MASK 0xFFFF /* EQ4_B2_A - [15:0] */
+#define WM5100_EQ4_B2_A_SHIFT 0 /* EQ4_B2_A - [15:0] */
+#define WM5100_EQ4_B2_A_WIDTH 16 /* EQ4_B2_A - [15:0] */
+
+/*
+ * R3672 (0xE58) - EQ4_7
+ */
+#define WM5100_EQ4_B2_B_MASK 0xFFFF /* EQ4_B2_B - [15:0] */
+#define WM5100_EQ4_B2_B_SHIFT 0 /* EQ4_B2_B - [15:0] */
+#define WM5100_EQ4_B2_B_WIDTH 16 /* EQ4_B2_B - [15:0] */
+
+/*
+ * R3673 (0xE59) - EQ4_8
+ */
+#define WM5100_EQ4_B2_C_MASK 0xFFFF /* EQ4_B2_C - [15:0] */
+#define WM5100_EQ4_B2_C_SHIFT 0 /* EQ4_B2_C - [15:0] */
+#define WM5100_EQ4_B2_C_WIDTH 16 /* EQ4_B2_C - [15:0] */
+
+/*
+ * R3674 (0xE5A) - EQ4_9
+ */
+#define WM5100_EQ4_B2_PG_MASK 0xFFFF /* EQ4_B2_PG - [15:0] */
+#define WM5100_EQ4_B2_PG_SHIFT 0 /* EQ4_B2_PG - [15:0] */
+#define WM5100_EQ4_B2_PG_WIDTH 16 /* EQ4_B2_PG - [15:0] */
+
+/*
+ * R3675 (0xE5B) - EQ4_10
+ */
+#define WM5100_EQ4_B3_A_MASK 0xFFFF /* EQ4_B3_A - [15:0] */
+#define WM5100_EQ4_B3_A_SHIFT 0 /* EQ4_B3_A - [15:0] */
+#define WM5100_EQ4_B3_A_WIDTH 16 /* EQ4_B3_A - [15:0] */
+
+/*
+ * R3676 (0xE5C) - EQ4_11
+ */
+#define WM5100_EQ4_B3_B_MASK 0xFFFF /* EQ4_B3_B - [15:0] */
+#define WM5100_EQ4_B3_B_SHIFT 0 /* EQ4_B3_B - [15:0] */
+#define WM5100_EQ4_B3_B_WIDTH 16 /* EQ4_B3_B - [15:0] */
+
+/*
+ * R3677 (0xE5D) - EQ4_12
+ */
+#define WM5100_EQ4_B3_C_MASK 0xFFFF /* EQ4_B3_C - [15:0] */
+#define WM5100_EQ4_B3_C_SHIFT 0 /* EQ4_B3_C - [15:0] */
+#define WM5100_EQ4_B3_C_WIDTH 16 /* EQ4_B3_C - [15:0] */
+
+/*
+ * R3678 (0xE5E) - EQ4_13
+ */
+#define WM5100_EQ4_B3_PG_MASK 0xFFFF /* EQ4_B3_PG - [15:0] */
+#define WM5100_EQ4_B3_PG_SHIFT 0 /* EQ4_B3_PG - [15:0] */
+#define WM5100_EQ4_B3_PG_WIDTH 16 /* EQ4_B3_PG - [15:0] */
+
+/*
+ * R3679 (0xE5F) - EQ4_14
+ */
+#define WM5100_EQ4_B4_A_MASK 0xFFFF /* EQ4_B4_A - [15:0] */
+#define WM5100_EQ4_B4_A_SHIFT 0 /* EQ4_B4_A - [15:0] */
+#define WM5100_EQ4_B4_A_WIDTH 16 /* EQ4_B4_A - [15:0] */
+
+/*
+ * R3680 (0xE60) - EQ4_15
+ */
+#define WM5100_EQ4_B4_B_MASK 0xFFFF /* EQ4_B4_B - [15:0] */
+#define WM5100_EQ4_B4_B_SHIFT 0 /* EQ4_B4_B - [15:0] */
+#define WM5100_EQ4_B4_B_WIDTH 16 /* EQ4_B4_B - [15:0] */
+
+/*
+ * R3681 (0xE61) - EQ4_16
+ */
+#define WM5100_EQ4_B4_C_MASK 0xFFFF /* EQ4_B4_C - [15:0] */
+#define WM5100_EQ4_B4_C_SHIFT 0 /* EQ4_B4_C - [15:0] */
+#define WM5100_EQ4_B4_C_WIDTH 16 /* EQ4_B4_C - [15:0] */
+
+/*
+ * R3682 (0xE62) - EQ4_17
+ */
+#define WM5100_EQ4_B4_PG_MASK 0xFFFF /* EQ4_B4_PG - [15:0] */
+#define WM5100_EQ4_B4_PG_SHIFT 0 /* EQ4_B4_PG - [15:0] */
+#define WM5100_EQ4_B4_PG_WIDTH 16 /* EQ4_B4_PG - [15:0] */
+
+/*
+ * R3683 (0xE63) - EQ4_18
+ */
+#define WM5100_EQ4_B5_A_MASK 0xFFFF /* EQ4_B5_A - [15:0] */
+#define WM5100_EQ4_B5_A_SHIFT 0 /* EQ4_B5_A - [15:0] */
+#define WM5100_EQ4_B5_A_WIDTH 16 /* EQ4_B5_A - [15:0] */
+
+/*
+ * R3684 (0xE64) - EQ4_19
+ */
+#define WM5100_EQ4_B5_B_MASK 0xFFFF /* EQ4_B5_B - [15:0] */
+#define WM5100_EQ4_B5_B_SHIFT 0 /* EQ4_B5_B - [15:0] */
+#define WM5100_EQ4_B5_B_WIDTH 16 /* EQ4_B5_B - [15:0] */
+
+/*
+ * R3685 (0xE65) - EQ4_20
+ */
+#define WM5100_EQ4_B5_PG_MASK 0xFFFF /* EQ4_B5_PG - [15:0] */
+#define WM5100_EQ4_B5_PG_SHIFT 0 /* EQ4_B5_PG - [15:0] */
+#define WM5100_EQ4_B5_PG_WIDTH 16 /* EQ4_B5_PG - [15:0] */
+
+/*
+ * R3712 (0xE80) - DRC1 ctrl1
+ */
+#define WM5100_DRC_SIG_DET_RMS_MASK 0xF800 /* DRC_SIG_DET_RMS - [15:11] */
+#define WM5100_DRC_SIG_DET_RMS_SHIFT 11 /* DRC_SIG_DET_RMS - [15:11] */
+#define WM5100_DRC_SIG_DET_RMS_WIDTH 5 /* DRC_SIG_DET_RMS - [15:11] */
+#define WM5100_DRC_SIG_DET_PK_MASK 0x0600 /* DRC_SIG_DET_PK - [10:9] */
+#define WM5100_DRC_SIG_DET_PK_SHIFT 9 /* DRC_SIG_DET_PK - [10:9] */
+#define WM5100_DRC_SIG_DET_PK_WIDTH 2 /* DRC_SIG_DET_PK - [10:9] */
+#define WM5100_DRC_NG_ENA 0x0100 /* DRC_NG_ENA */
+#define WM5100_DRC_NG_ENA_MASK 0x0100 /* DRC_NG_ENA */
+#define WM5100_DRC_NG_ENA_SHIFT 8 /* DRC_NG_ENA */
+#define WM5100_DRC_NG_ENA_WIDTH 1 /* DRC_NG_ENA */
+#define WM5100_DRC_SIG_DET_MODE 0x0080 /* DRC_SIG_DET_MODE */
+#define WM5100_DRC_SIG_DET_MODE_MASK 0x0080 /* DRC_SIG_DET_MODE */
+#define WM5100_DRC_SIG_DET_MODE_SHIFT 7 /* DRC_SIG_DET_MODE */
+#define WM5100_DRC_SIG_DET_MODE_WIDTH 1 /* DRC_SIG_DET_MODE */
+#define WM5100_DRC_SIG_DET 0x0040 /* DRC_SIG_DET */
+#define WM5100_DRC_SIG_DET_MASK 0x0040 /* DRC_SIG_DET */
+#define WM5100_DRC_SIG_DET_SHIFT 6 /* DRC_SIG_DET */
+#define WM5100_DRC_SIG_DET_WIDTH 1 /* DRC_SIG_DET */
+#define WM5100_DRC_KNEE2_OP_ENA 0x0020 /* DRC_KNEE2_OP_ENA */
+#define WM5100_DRC_KNEE2_OP_ENA_MASK 0x0020 /* DRC_KNEE2_OP_ENA */
+#define WM5100_DRC_KNEE2_OP_ENA_SHIFT 5 /* DRC_KNEE2_OP_ENA */
+#define WM5100_DRC_KNEE2_OP_ENA_WIDTH 1 /* DRC_KNEE2_OP_ENA */
+#define WM5100_DRC_QR 0x0010 /* DRC_QR */
+#define WM5100_DRC_QR_MASK 0x0010 /* DRC_QR */
+#define WM5100_DRC_QR_SHIFT 4 /* DRC_QR */
+#define WM5100_DRC_QR_WIDTH 1 /* DRC_QR */
+#define WM5100_DRC_ANTICLIP 0x0008 /* DRC_ANTICLIP */
+#define WM5100_DRC_ANTICLIP_MASK 0x0008 /* DRC_ANTICLIP */
+#define WM5100_DRC_ANTICLIP_SHIFT 3 /* DRC_ANTICLIP */
+#define WM5100_DRC_ANTICLIP_WIDTH 1 /* DRC_ANTICLIP */
+#define WM5100_DRCL_ENA 0x0002 /* DRCL_ENA */
+#define WM5100_DRCL_ENA_MASK 0x0002 /* DRCL_ENA */
+#define WM5100_DRCL_ENA_SHIFT 1 /* DRCL_ENA */
+#define WM5100_DRCL_ENA_WIDTH 1 /* DRCL_ENA */
+#define WM5100_DRCR_ENA 0x0001 /* DRCR_ENA */
+#define WM5100_DRCR_ENA_MASK 0x0001 /* DRCR_ENA */
+#define WM5100_DRCR_ENA_SHIFT 0 /* DRCR_ENA */
+#define WM5100_DRCR_ENA_WIDTH 1 /* DRCR_ENA */
+
+/*
+ * R3713 (0xE81) - DRC1 ctrl2
+ */
+#define WM5100_DRC_ATK_MASK 0x1E00 /* DRC_ATK - [12:9] */
+#define WM5100_DRC_ATK_SHIFT 9 /* DRC_ATK - [12:9] */
+#define WM5100_DRC_ATK_WIDTH 4 /* DRC_ATK - [12:9] */
+#define WM5100_DRC_DCY_MASK 0x01E0 /* DRC_DCY - [8:5] */
+#define WM5100_DRC_DCY_SHIFT 5 /* DRC_DCY - [8:5] */
+#define WM5100_DRC_DCY_WIDTH 4 /* DRC_DCY - [8:5] */
+#define WM5100_DRC_MINGAIN_MASK 0x001C /* DRC_MINGAIN - [4:2] */
+#define WM5100_DRC_MINGAIN_SHIFT 2 /* DRC_MINGAIN - [4:2] */
+#define WM5100_DRC_MINGAIN_WIDTH 3 /* DRC_MINGAIN - [4:2] */
+#define WM5100_DRC_MAXGAIN_MASK 0x0003 /* DRC_MAXGAIN - [1:0] */
+#define WM5100_DRC_MAXGAIN_SHIFT 0 /* DRC_MAXGAIN - [1:0] */
+#define WM5100_DRC_MAXGAIN_WIDTH 2 /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R3714 (0xE82) - DRC1 ctrl3
+ */
+#define WM5100_DRC_NG_MINGAIN_MASK 0xF000 /* DRC_NG_MINGAIN - [15:12] */
+#define WM5100_DRC_NG_MINGAIN_SHIFT 12 /* DRC_NG_MINGAIN - [15:12] */
+#define WM5100_DRC_NG_MINGAIN_WIDTH 4 /* DRC_NG_MINGAIN - [15:12] */
+#define WM5100_DRC_NG_EXP_MASK 0x0C00 /* DRC_NG_EXP - [11:10] */
+#define WM5100_DRC_NG_EXP_SHIFT 10 /* DRC_NG_EXP - [11:10] */
+#define WM5100_DRC_NG_EXP_WIDTH 2 /* DRC_NG_EXP - [11:10] */
+#define WM5100_DRC_QR_THR_MASK 0x0300 /* DRC_QR_THR - [9:8] */
+#define WM5100_DRC_QR_THR_SHIFT 8 /* DRC_QR_THR - [9:8] */
+#define WM5100_DRC_QR_THR_WIDTH 2 /* DRC_QR_THR - [9:8] */
+#define WM5100_DRC_QR_DCY_MASK 0x00C0 /* DRC_QR_DCY - [7:6] */
+#define WM5100_DRC_QR_DCY_SHIFT 6 /* DRC_QR_DCY - [7:6] */
+#define WM5100_DRC_QR_DCY_WIDTH 2 /* DRC_QR_DCY - [7:6] */
+#define WM5100_DRC_HI_COMP_MASK 0x0038 /* DRC_HI_COMP - [5:3] */
+#define WM5100_DRC_HI_COMP_SHIFT 3 /* DRC_HI_COMP - [5:3] */
+#define WM5100_DRC_HI_COMP_WIDTH 3 /* DRC_HI_COMP - [5:3] */
+#define WM5100_DRC_LO_COMP_MASK 0x0007 /* DRC_LO_COMP - [2:0] */
+#define WM5100_DRC_LO_COMP_SHIFT 0 /* DRC_LO_COMP - [2:0] */
+#define WM5100_DRC_LO_COMP_WIDTH 3 /* DRC_LO_COMP - [2:0] */
+
+/*
+ * R3715 (0xE83) - DRC1 ctrl4
+ */
+#define WM5100_DRC_KNEE_IP_MASK 0x07E0 /* DRC_KNEE_IP - [10:5] */
+#define WM5100_DRC_KNEE_IP_SHIFT 5 /* DRC_KNEE_IP - [10:5] */
+#define WM5100_DRC_KNEE_IP_WIDTH 6 /* DRC_KNEE_IP - [10:5] */
+#define WM5100_DRC_KNEE_OP_MASK 0x001F /* DRC_KNEE_OP - [4:0] */
+#define WM5100_DRC_KNEE_OP_SHIFT 0 /* DRC_KNEE_OP - [4:0] */
+#define WM5100_DRC_KNEE_OP_WIDTH 5 /* DRC_KNEE_OP - [4:0] */
+
+/*
+ * R3716 (0xE84) - DRC1 ctrl5
+ */
+#define WM5100_DRC_KNEE2_IP_MASK 0x03E0 /* DRC_KNEE2_IP - [9:5] */
+#define WM5100_DRC_KNEE2_IP_SHIFT 5 /* DRC_KNEE2_IP - [9:5] */
+#define WM5100_DRC_KNEE2_IP_WIDTH 5 /* DRC_KNEE2_IP - [9:5] */
+#define WM5100_DRC_KNEE2_OP_MASK 0x001F /* DRC_KNEE2_OP - [4:0] */
+#define WM5100_DRC_KNEE2_OP_SHIFT 0 /* DRC_KNEE2_OP - [4:0] */
+#define WM5100_DRC_KNEE2_OP_WIDTH 5 /* DRC_KNEE2_OP - [4:0] */
+
+/*
+ * R3776 (0xEC0) - HPLPF1_1
+ */
+#define WM5100_LHPF1_MODE 0x0002 /* LHPF1_MODE */
+#define WM5100_LHPF1_MODE_MASK 0x0002 /* LHPF1_MODE */
+#define WM5100_LHPF1_MODE_SHIFT 1 /* LHPF1_MODE */
+#define WM5100_LHPF1_MODE_WIDTH 1 /* LHPF1_MODE */
+#define WM5100_LHPF1_ENA 0x0001 /* LHPF1_ENA */
+#define WM5100_LHPF1_ENA_MASK 0x0001 /* LHPF1_ENA */
+#define WM5100_LHPF1_ENA_SHIFT 0 /* LHPF1_ENA */
+#define WM5100_LHPF1_ENA_WIDTH 1 /* LHPF1_ENA */
+
+/*
+ * R3777 (0xEC1) - HPLPF1_2
+ */
+#define WM5100_LHPF1_COEFF_MASK 0xFFFF /* LHPF1_COEFF - [15:0] */
+#define WM5100_LHPF1_COEFF_SHIFT 0 /* LHPF1_COEFF - [15:0] */
+#define WM5100_LHPF1_COEFF_WIDTH 16 /* LHPF1_COEFF - [15:0] */
+
+/*
+ * R3780 (0xEC4) - HPLPF2_1
+ */
+#define WM5100_LHPF2_MODE 0x0002 /* LHPF2_MODE */
+#define WM5100_LHPF2_MODE_MASK 0x0002 /* LHPF2_MODE */
+#define WM5100_LHPF2_MODE_SHIFT 1 /* LHPF2_MODE */
+#define WM5100_LHPF2_MODE_WIDTH 1 /* LHPF2_MODE */
+#define WM5100_LHPF2_ENA 0x0001 /* LHPF2_ENA */
+#define WM5100_LHPF2_ENA_MASK 0x0001 /* LHPF2_ENA */
+#define WM5100_LHPF2_ENA_SHIFT 0 /* LHPF2_ENA */
+#define WM5100_LHPF2_ENA_WIDTH 1 /* LHPF2_ENA */
+
+/*
+ * R3781 (0xEC5) - HPLPF2_2
+ */
+#define WM5100_LHPF2_COEFF_MASK 0xFFFF /* LHPF2_COEFF - [15:0] */
+#define WM5100_LHPF2_COEFF_SHIFT 0 /* LHPF2_COEFF - [15:0] */
+#define WM5100_LHPF2_COEFF_WIDTH 16 /* LHPF2_COEFF - [15:0] */
+
+/*
+ * R3784 (0xEC8) - HPLPF3_1
+ */
+#define WM5100_LHPF3_MODE 0x0002 /* LHPF3_MODE */
+#define WM5100_LHPF3_MODE_MASK 0x0002 /* LHPF3_MODE */
+#define WM5100_LHPF3_MODE_SHIFT 1 /* LHPF3_MODE */
+#define WM5100_LHPF3_MODE_WIDTH 1 /* LHPF3_MODE */
+#define WM5100_LHPF3_ENA 0x0001 /* LHPF3_ENA */
+#define WM5100_LHPF3_ENA_MASK 0x0001 /* LHPF3_ENA */
+#define WM5100_LHPF3_ENA_SHIFT 0 /* LHPF3_ENA */
+#define WM5100_LHPF3_ENA_WIDTH 1 /* LHPF3_ENA */
+
+/*
+ * R3785 (0xEC9) - HPLPF3_2
+ */
+#define WM5100_LHPF3_COEFF_MASK 0xFFFF /* LHPF3_COEFF - [15:0] */
+#define WM5100_LHPF3_COEFF_SHIFT 0 /* LHPF3_COEFF - [15:0] */
+#define WM5100_LHPF3_COEFF_WIDTH 16 /* LHPF3_COEFF - [15:0] */
+
+/*
+ * R3788 (0xECC) - HPLPF4_1
+ */
+#define WM5100_LHPF4_MODE 0x0002 /* LHPF4_MODE */
+#define WM5100_LHPF4_MODE_MASK 0x0002 /* LHPF4_MODE */
+#define WM5100_LHPF4_MODE_SHIFT 1 /* LHPF4_MODE */
+#define WM5100_LHPF4_MODE_WIDTH 1 /* LHPF4_MODE */
+#define WM5100_LHPF4_ENA 0x0001 /* LHPF4_ENA */
+#define WM5100_LHPF4_ENA_MASK 0x0001 /* LHPF4_ENA */
+#define WM5100_LHPF4_ENA_SHIFT 0 /* LHPF4_ENA */
+#define WM5100_LHPF4_ENA_WIDTH 1 /* LHPF4_ENA */
+
+/*
+ * R3789 (0xECD) - HPLPF4_2
+ */
+#define WM5100_LHPF4_COEFF_MASK 0xFFFF /* LHPF4_COEFF - [15:0] */
+#define WM5100_LHPF4_COEFF_SHIFT 0 /* LHPF4_COEFF - [15:0] */
+#define WM5100_LHPF4_COEFF_WIDTH 16 /* LHPF4_COEFF - [15:0] */
+
+/*
+ * R16384 (0x4000) - DSP1 DM 0
+ */
+#define WM5100_DSP1_DM_START_1_MASK 0x00FF /* DSP1_DM_START - [7:0] */
+#define WM5100_DSP1_DM_START_1_SHIFT 0 /* DSP1_DM_START - [7:0] */
+#define WM5100_DSP1_DM_START_1_WIDTH 8 /* DSP1_DM_START - [7:0] */
+
+/*
+ * R16385 (0x4001) - DSP1 DM 1
+ */
+#define WM5100_DSP1_DM_START_MASK 0xFFFF /* DSP1_DM_START - [15:0] */
+#define WM5100_DSP1_DM_START_SHIFT 0 /* DSP1_DM_START - [15:0] */
+#define WM5100_DSP1_DM_START_WIDTH 16 /* DSP1_DM_START - [15:0] */
+
+/*
+ * R16386 (0x4002) - DSP1 DM 2
+ */
+#define WM5100_DSP1_DM_1_1_MASK 0x00FF /* DSP1_DM_1 - [7:0] */
+#define WM5100_DSP1_DM_1_1_SHIFT 0 /* DSP1_DM_1 - [7:0] */
+#define WM5100_DSP1_DM_1_1_WIDTH 8 /* DSP1_DM_1 - [7:0] */
+
+/*
+ * R16387 (0x4003) - DSP1 DM 3
+ */
+#define WM5100_DSP1_DM_1_MASK 0xFFFF /* DSP1_DM_1 - [15:0] */
+#define WM5100_DSP1_DM_1_SHIFT 0 /* DSP1_DM_1 - [15:0] */
+#define WM5100_DSP1_DM_1_WIDTH 16 /* DSP1_DM_1 - [15:0] */
+
+/*
+ * R16892 (0x41FC) - DSP1 DM 508
+ */
+#define WM5100_DSP1_DM_254_1_MASK 0x00FF /* DSP1_DM_254 - [7:0] */
+#define WM5100_DSP1_DM_254_1_SHIFT 0 /* DSP1_DM_254 - [7:0] */
+#define WM5100_DSP1_DM_254_1_WIDTH 8 /* DSP1_DM_254 - [7:0] */
+
+/*
+ * R16893 (0x41FD) - DSP1 DM 509
+ */
+#define WM5100_DSP1_DM_254_MASK 0xFFFF /* DSP1_DM_254 - [15:0] */
+#define WM5100_DSP1_DM_254_SHIFT 0 /* DSP1_DM_254 - [15:0] */
+#define WM5100_DSP1_DM_254_WIDTH 16 /* DSP1_DM_254 - [15:0] */
+
+/*
+ * R16894 (0x41FE) - DSP1 DM 510
+ */
+#define WM5100_DSP1_DM_END_1_MASK 0x00FF /* DSP1_DM_END - [7:0] */
+#define WM5100_DSP1_DM_END_1_SHIFT 0 /* DSP1_DM_END - [7:0] */
+#define WM5100_DSP1_DM_END_1_WIDTH 8 /* DSP1_DM_END - [7:0] */
+
+/*
+ * R16895 (0x41FF) - DSP1 DM 511
+ */
+#define WM5100_DSP1_DM_END_MASK 0xFFFF /* DSP1_DM_END - [15:0] */
+#define WM5100_DSP1_DM_END_SHIFT 0 /* DSP1_DM_END - [15:0] */
+#define WM5100_DSP1_DM_END_WIDTH 16 /* DSP1_DM_END - [15:0] */
+
+/*
+ * R18432 (0x4800) - DSP1 PM 0
+ */
+#define WM5100_DSP1_PM_START_2_MASK 0x00FF /* DSP1_PM_START - [7:0] */
+#define WM5100_DSP1_PM_START_2_SHIFT 0 /* DSP1_PM_START - [7:0] */
+#define WM5100_DSP1_PM_START_2_WIDTH 8 /* DSP1_PM_START - [7:0] */
+
+/*
+ * R18433 (0x4801) - DSP1 PM 1
+ */
+#define WM5100_DSP1_PM_START_1_MASK 0xFFFF /* DSP1_PM_START - [15:0] */
+#define WM5100_DSP1_PM_START_1_SHIFT 0 /* DSP1_PM_START - [15:0] */
+#define WM5100_DSP1_PM_START_1_WIDTH 16 /* DSP1_PM_START - [15:0] */
+
+/*
+ * R18434 (0x4802) - DSP1 PM 2
+ */
+#define WM5100_DSP1_PM_START_MASK 0xFFFF /* DSP1_PM_START - [15:0] */
+#define WM5100_DSP1_PM_START_SHIFT 0 /* DSP1_PM_START - [15:0] */
+#define WM5100_DSP1_PM_START_WIDTH 16 /* DSP1_PM_START - [15:0] */
+
+/*
+ * R18435 (0x4803) - DSP1 PM 3
+ */
+#define WM5100_DSP1_PM_1_2_MASK 0x00FF /* DSP1_PM_1 - [7:0] */
+#define WM5100_DSP1_PM_1_2_SHIFT 0 /* DSP1_PM_1 - [7:0] */
+#define WM5100_DSP1_PM_1_2_WIDTH 8 /* DSP1_PM_1 - [7:0] */
+
+/*
+ * R18436 (0x4804) - DSP1 PM 4
+ */
+#define WM5100_DSP1_PM_1_1_MASK 0xFFFF /* DSP1_PM_1 - [15:0] */
+#define WM5100_DSP1_PM_1_1_SHIFT 0 /* DSP1_PM_1 - [15:0] */
+#define WM5100_DSP1_PM_1_1_WIDTH 16 /* DSP1_PM_1 - [15:0] */
+
+/*
+ * R18437 (0x4805) - DSP1 PM 5
+ */
+#define WM5100_DSP1_PM_1_MASK 0xFFFF /* DSP1_PM_1 - [15:0] */
+#define WM5100_DSP1_PM_1_SHIFT 0 /* DSP1_PM_1 - [15:0] */
+#define WM5100_DSP1_PM_1_WIDTH 16 /* DSP1_PM_1 - [15:0] */
+
+/*
+ * R19962 (0x4DFA) - DSP1 PM 1530
+ */
+#define WM5100_DSP1_PM_510_2_MASK 0x00FF /* DSP1_PM_510 - [7:0] */
+#define WM5100_DSP1_PM_510_2_SHIFT 0 /* DSP1_PM_510 - [7:0] */
+#define WM5100_DSP1_PM_510_2_WIDTH 8 /* DSP1_PM_510 - [7:0] */
+
+/*
+ * R19963 (0x4DFB) - DSP1 PM 1531
+ */
+#define WM5100_DSP1_PM_510_1_MASK 0xFFFF /* DSP1_PM_510 - [15:0] */
+#define WM5100_DSP1_PM_510_1_SHIFT 0 /* DSP1_PM_510 - [15:0] */
+#define WM5100_DSP1_PM_510_1_WIDTH 16 /* DSP1_PM_510 - [15:0] */
+
+/*
+ * R19964 (0x4DFC) - DSP1 PM 1532
+ */
+#define WM5100_DSP1_PM_510_MASK 0xFFFF /* DSP1_PM_510 - [15:0] */
+#define WM5100_DSP1_PM_510_SHIFT 0 /* DSP1_PM_510 - [15:0] */
+#define WM5100_DSP1_PM_510_WIDTH 16 /* DSP1_PM_510 - [15:0] */
+
+/*
+ * R19965 (0x4DFD) - DSP1 PM 1533
+ */
+#define WM5100_DSP1_PM_END_2_MASK 0x00FF /* DSP1_PM_END - [7:0] */
+#define WM5100_DSP1_PM_END_2_SHIFT 0 /* DSP1_PM_END - [7:0] */
+#define WM5100_DSP1_PM_END_2_WIDTH 8 /* DSP1_PM_END - [7:0] */
+
+/*
+ * R19966 (0x4DFE) - DSP1 PM 1534
+ */
+#define WM5100_DSP1_PM_END_1_MASK 0xFFFF /* DSP1_PM_END - [15:0] */
+#define WM5100_DSP1_PM_END_1_SHIFT 0 /* DSP1_PM_END - [15:0] */
+#define WM5100_DSP1_PM_END_1_WIDTH 16 /* DSP1_PM_END - [15:0] */
+
+/*
+ * R19967 (0x4DFF) - DSP1 PM 1535
+ */
+#define WM5100_DSP1_PM_END_MASK 0xFFFF /* DSP1_PM_END - [15:0] */
+#define WM5100_DSP1_PM_END_SHIFT 0 /* DSP1_PM_END - [15:0] */
+#define WM5100_DSP1_PM_END_WIDTH 16 /* DSP1_PM_END - [15:0] */
+
+/*
+ * R20480 (0x5000) - DSP1 ZM 0
+ */
+#define WM5100_DSP1_ZM_START_1_MASK 0x00FF /* DSP1_ZM_START - [7:0] */
+#define WM5100_DSP1_ZM_START_1_SHIFT 0 /* DSP1_ZM_START - [7:0] */
+#define WM5100_DSP1_ZM_START_1_WIDTH 8 /* DSP1_ZM_START - [7:0] */
+
+/*
+ * R20481 (0x5001) - DSP1 ZM 1
+ */
+#define WM5100_DSP1_ZM_START_MASK 0xFFFF /* DSP1_ZM_START - [15:0] */
+#define WM5100_DSP1_ZM_START_SHIFT 0 /* DSP1_ZM_START - [15:0] */
+#define WM5100_DSP1_ZM_START_WIDTH 16 /* DSP1_ZM_START - [15:0] */
+
+/*
+ * R20482 (0x5002) - DSP1 ZM 2
+ */
+#define WM5100_DSP1_ZM_1_1_MASK 0x00FF /* DSP1_ZM_1 - [7:0] */
+#define WM5100_DSP1_ZM_1_1_SHIFT 0 /* DSP1_ZM_1 - [7:0] */
+#define WM5100_DSP1_ZM_1_1_WIDTH 8 /* DSP1_ZM_1 - [7:0] */
+
+/*
+ * R20483 (0x5003) - DSP1 ZM 3
+ */
+#define WM5100_DSP1_ZM_1_MASK 0xFFFF /* DSP1_ZM_1 - [15:0] */
+#define WM5100_DSP1_ZM_1_SHIFT 0 /* DSP1_ZM_1 - [15:0] */
+#define WM5100_DSP1_ZM_1_WIDTH 16 /* DSP1_ZM_1 - [15:0] */
+
+/*
+ * R22524 (0x57FC) - DSP1 ZM 2044
+ */
+#define WM5100_DSP1_ZM_1022_1_MASK 0x00FF /* DSP1_ZM_1022 - [7:0] */
+#define WM5100_DSP1_ZM_1022_1_SHIFT 0 /* DSP1_ZM_1022 - [7:0] */
+#define WM5100_DSP1_ZM_1022_1_WIDTH 8 /* DSP1_ZM_1022 - [7:0] */
+
+/*
+ * R22525 (0x57FD) - DSP1 ZM 2045
+ */
+#define WM5100_DSP1_ZM_1022_MASK 0xFFFF /* DSP1_ZM_1022 - [15:0] */
+#define WM5100_DSP1_ZM_1022_SHIFT 0 /* DSP1_ZM_1022 - [15:0] */
+#define WM5100_DSP1_ZM_1022_WIDTH 16 /* DSP1_ZM_1022 - [15:0] */
+
+/*
+ * R22526 (0x57FE) - DSP1 ZM 2046
+ */
+#define WM5100_DSP1_ZM_END_1_MASK 0x00FF /* DSP1_ZM_END - [7:0] */
+#define WM5100_DSP1_ZM_END_1_SHIFT 0 /* DSP1_ZM_END - [7:0] */
+#define WM5100_DSP1_ZM_END_1_WIDTH 8 /* DSP1_ZM_END - [7:0] */
+
+/*
+ * R22527 (0x57FF) - DSP1 ZM 2047
+ */
+#define WM5100_DSP1_ZM_END_MASK 0xFFFF /* DSP1_ZM_END - [15:0] */
+#define WM5100_DSP1_ZM_END_SHIFT 0 /* DSP1_ZM_END - [15:0] */
+#define WM5100_DSP1_ZM_END_WIDTH 16 /* DSP1_ZM_END - [15:0] */
+
+/*
+ * R24576 (0x6000) - DSP2 DM 0
+ */
+#define WM5100_DSP2_DM_START_1_MASK 0x00FF /* DSP2_DM_START - [7:0] */
+#define WM5100_DSP2_DM_START_1_SHIFT 0 /* DSP2_DM_START - [7:0] */
+#define WM5100_DSP2_DM_START_1_WIDTH 8 /* DSP2_DM_START - [7:0] */
+
+/*
+ * R24577 (0x6001) - DSP2 DM 1
+ */
+#define WM5100_DSP2_DM_START_MASK 0xFFFF /* DSP2_DM_START - [15:0] */
+#define WM5100_DSP2_DM_START_SHIFT 0 /* DSP2_DM_START - [15:0] */
+#define WM5100_DSP2_DM_START_WIDTH 16 /* DSP2_DM_START - [15:0] */
+
+/*
+ * R24578 (0x6002) - DSP2 DM 2
+ */
+#define WM5100_DSP2_DM_1_1_MASK 0x00FF /* DSP2_DM_1 - [7:0] */
+#define WM5100_DSP2_DM_1_1_SHIFT 0 /* DSP2_DM_1 - [7:0] */
+#define WM5100_DSP2_DM_1_1_WIDTH 8 /* DSP2_DM_1 - [7:0] */
+
+/*
+ * R24579 (0x6003) - DSP2 DM 3
+ */
+#define WM5100_DSP2_DM_1_MASK 0xFFFF /* DSP2_DM_1 - [15:0] */
+#define WM5100_DSP2_DM_1_SHIFT 0 /* DSP2_DM_1 - [15:0] */
+#define WM5100_DSP2_DM_1_WIDTH 16 /* DSP2_DM_1 - [15:0] */
+
+/*
+ * R25084 (0x61FC) - DSP2 DM 508
+ */
+#define WM5100_DSP2_DM_254_1_MASK 0x00FF /* DSP2_DM_254 - [7:0] */
+#define WM5100_DSP2_DM_254_1_SHIFT 0 /* DSP2_DM_254 - [7:0] */
+#define WM5100_DSP2_DM_254_1_WIDTH 8 /* DSP2_DM_254 - [7:0] */
+
+/*
+ * R25085 (0x61FD) - DSP2 DM 509
+ */
+#define WM5100_DSP2_DM_254_MASK 0xFFFF /* DSP2_DM_254 - [15:0] */
+#define WM5100_DSP2_DM_254_SHIFT 0 /* DSP2_DM_254 - [15:0] */
+#define WM5100_DSP2_DM_254_WIDTH 16 /* DSP2_DM_254 - [15:0] */
+
+/*
+ * R25086 (0x61FE) - DSP2 DM 510
+ */
+#define WM5100_DSP2_DM_END_1_MASK 0x00FF /* DSP2_DM_END - [7:0] */
+#define WM5100_DSP2_DM_END_1_SHIFT 0 /* DSP2_DM_END - [7:0] */
+#define WM5100_DSP2_DM_END_1_WIDTH 8 /* DSP2_DM_END - [7:0] */
+
+/*
+ * R25087 (0x61FF) - DSP2 DM 511
+ */
+#define WM5100_DSP2_DM_END_MASK 0xFFFF /* DSP2_DM_END - [15:0] */
+#define WM5100_DSP2_DM_END_SHIFT 0 /* DSP2_DM_END - [15:0] */
+#define WM5100_DSP2_DM_END_WIDTH 16 /* DSP2_DM_END - [15:0] */
+
+/*
+ * R26624 (0x6800) - DSP2 PM 0
+ */
+#define WM5100_DSP2_PM_START_2_MASK 0x00FF /* DSP2_PM_START - [7:0] */
+#define WM5100_DSP2_PM_START_2_SHIFT 0 /* DSP2_PM_START - [7:0] */
+#define WM5100_DSP2_PM_START_2_WIDTH 8 /* DSP2_PM_START - [7:0] */
+
+/*
+ * R26625 (0x6801) - DSP2 PM 1
+ */
+#define WM5100_DSP2_PM_START_1_MASK 0xFFFF /* DSP2_PM_START - [15:0] */
+#define WM5100_DSP2_PM_START_1_SHIFT 0 /* DSP2_PM_START - [15:0] */
+#define WM5100_DSP2_PM_START_1_WIDTH 16 /* DSP2_PM_START - [15:0] */
+
+/*
+ * R26626 (0x6802) - DSP2 PM 2
+ */
+#define WM5100_DSP2_PM_START_MASK 0xFFFF /* DSP2_PM_START - [15:0] */
+#define WM5100_DSP2_PM_START_SHIFT 0 /* DSP2_PM_START - [15:0] */
+#define WM5100_DSP2_PM_START_WIDTH 16 /* DSP2_PM_START - [15:0] */
+
+/*
+ * R26627 (0x6803) - DSP2 PM 3
+ */
+#define WM5100_DSP2_PM_1_2_MASK 0x00FF /* DSP2_PM_1 - [7:0] */
+#define WM5100_DSP2_PM_1_2_SHIFT 0 /* DSP2_PM_1 - [7:0] */
+#define WM5100_DSP2_PM_1_2_WIDTH 8 /* DSP2_PM_1 - [7:0] */
+
+/*
+ * R26628 (0x6804) - DSP2 PM 4
+ */
+#define WM5100_DSP2_PM_1_1_MASK 0xFFFF /* DSP2_PM_1 - [15:0] */
+#define WM5100_DSP2_PM_1_1_SHIFT 0 /* DSP2_PM_1 - [15:0] */
+#define WM5100_DSP2_PM_1_1_WIDTH 16 /* DSP2_PM_1 - [15:0] */
+
+/*
+ * R26629 (0x6805) - DSP2 PM 5
+ */
+#define WM5100_DSP2_PM_1_MASK 0xFFFF /* DSP2_PM_1 - [15:0] */
+#define WM5100_DSP2_PM_1_SHIFT 0 /* DSP2_PM_1 - [15:0] */
+#define WM5100_DSP2_PM_1_WIDTH 16 /* DSP2_PM_1 - [15:0] */
+
+/*
+ * R28154 (0x6DFA) - DSP2 PM 1530
+ */
+#define WM5100_DSP2_PM_510_2_MASK 0x00FF /* DSP2_PM_510 - [7:0] */
+#define WM5100_DSP2_PM_510_2_SHIFT 0 /* DSP2_PM_510 - [7:0] */
+#define WM5100_DSP2_PM_510_2_WIDTH 8 /* DSP2_PM_510 - [7:0] */
+
+/*
+ * R28155 (0x6DFB) - DSP2 PM 1531
+ */
+#define WM5100_DSP2_PM_510_1_MASK 0xFFFF /* DSP2_PM_510 - [15:0] */
+#define WM5100_DSP2_PM_510_1_SHIFT 0 /* DSP2_PM_510 - [15:0] */
+#define WM5100_DSP2_PM_510_1_WIDTH 16 /* DSP2_PM_510 - [15:0] */
+
+/*
+ * R28156 (0x6DFC) - DSP2 PM 1532
+ */
+#define WM5100_DSP2_PM_510_MASK 0xFFFF /* DSP2_PM_510 - [15:0] */
+#define WM5100_DSP2_PM_510_SHIFT 0 /* DSP2_PM_510 - [15:0] */
+#define WM5100_DSP2_PM_510_WIDTH 16 /* DSP2_PM_510 - [15:0] */
+
+/*
+ * R28157 (0x6DFD) - DSP2 PM 1533
+ */
+#define WM5100_DSP2_PM_END_2_MASK 0x00FF /* DSP2_PM_END - [7:0] */
+#define WM5100_DSP2_PM_END_2_SHIFT 0 /* DSP2_PM_END - [7:0] */
+#define WM5100_DSP2_PM_END_2_WIDTH 8 /* DSP2_PM_END - [7:0] */
+
+/*
+ * R28158 (0x6DFE) - DSP2 PM 1534
+ */
+#define WM5100_DSP2_PM_END_1_MASK 0xFFFF /* DSP2_PM_END - [15:0] */
+#define WM5100_DSP2_PM_END_1_SHIFT 0 /* DSP2_PM_END - [15:0] */
+#define WM5100_DSP2_PM_END_1_WIDTH 16 /* DSP2_PM_END - [15:0] */
+
+/*
+ * R28159 (0x6DFF) - DSP2 PM 1535
+ */
+#define WM5100_DSP2_PM_END_MASK 0xFFFF /* DSP2_PM_END - [15:0] */
+#define WM5100_DSP2_PM_END_SHIFT 0 /* DSP2_PM_END - [15:0] */
+#define WM5100_DSP2_PM_END_WIDTH 16 /* DSP2_PM_END - [15:0] */
+
+/*
+ * R28672 (0x7000) - DSP2 ZM 0
+ */
+#define WM5100_DSP2_ZM_START_1_MASK 0x00FF /* DSP2_ZM_START - [7:0] */
+#define WM5100_DSP2_ZM_START_1_SHIFT 0 /* DSP2_ZM_START - [7:0] */
+#define WM5100_DSP2_ZM_START_1_WIDTH 8 /* DSP2_ZM_START - [7:0] */
+
+/*
+ * R28673 (0x7001) - DSP2 ZM 1
+ */
+#define WM5100_DSP2_ZM_START_MASK 0xFFFF /* DSP2_ZM_START - [15:0] */
+#define WM5100_DSP2_ZM_START_SHIFT 0 /* DSP2_ZM_START - [15:0] */
+#define WM5100_DSP2_ZM_START_WIDTH 16 /* DSP2_ZM_START - [15:0] */
+
+/*
+ * R28674 (0x7002) - DSP2 ZM 2
+ */
+#define WM5100_DSP2_ZM_1_1_MASK 0x00FF /* DSP2_ZM_1 - [7:0] */
+#define WM5100_DSP2_ZM_1_1_SHIFT 0 /* DSP2_ZM_1 - [7:0] */
+#define WM5100_DSP2_ZM_1_1_WIDTH 8 /* DSP2_ZM_1 - [7:0] */
+
+/*
+ * R28675 (0x7003) - DSP2 ZM 3
+ */
+#define WM5100_DSP2_ZM_1_MASK 0xFFFF /* DSP2_ZM_1 - [15:0] */
+#define WM5100_DSP2_ZM_1_SHIFT 0 /* DSP2_ZM_1 - [15:0] */
+#define WM5100_DSP2_ZM_1_WIDTH 16 /* DSP2_ZM_1 - [15:0] */
+
+/*
+ * R30716 (0x77FC) - DSP2 ZM 2044
+ */
+#define WM5100_DSP2_ZM_1022_1_MASK 0x00FF /* DSP2_ZM_1022 - [7:0] */
+#define WM5100_DSP2_ZM_1022_1_SHIFT 0 /* DSP2_ZM_1022 - [7:0] */
+#define WM5100_DSP2_ZM_1022_1_WIDTH 8 /* DSP2_ZM_1022 - [7:0] */
+
+/*
+ * R30717 (0x77FD) - DSP2 ZM 2045
+ */
+#define WM5100_DSP2_ZM_1022_MASK 0xFFFF /* DSP2_ZM_1022 - [15:0] */
+#define WM5100_DSP2_ZM_1022_SHIFT 0 /* DSP2_ZM_1022 - [15:0] */
+#define WM5100_DSP2_ZM_1022_WIDTH 16 /* DSP2_ZM_1022 - [15:0] */
+
+/*
+ * R30718 (0x77FE) - DSP2 ZM 2046
+ */
+#define WM5100_DSP2_ZM_END_1_MASK 0x00FF /* DSP2_ZM_END - [7:0] */
+#define WM5100_DSP2_ZM_END_1_SHIFT 0 /* DSP2_ZM_END - [7:0] */
+#define WM5100_DSP2_ZM_END_1_WIDTH 8 /* DSP2_ZM_END - [7:0] */
+
+/*
+ * R30719 (0x77FF) - DSP2 ZM 2047
+ */
+#define WM5100_DSP2_ZM_END_MASK 0xFFFF /* DSP2_ZM_END - [15:0] */
+#define WM5100_DSP2_ZM_END_SHIFT 0 /* DSP2_ZM_END - [15:0] */
+#define WM5100_DSP2_ZM_END_WIDTH 16 /* DSP2_ZM_END - [15:0] */
+
+/*
+ * R32768 (0x8000) - DSP3 DM 0
+ */
+#define WM5100_DSP3_DM_START_1_MASK 0x00FF /* DSP3_DM_START - [7:0] */
+#define WM5100_DSP3_DM_START_1_SHIFT 0 /* DSP3_DM_START - [7:0] */
+#define WM5100_DSP3_DM_START_1_WIDTH 8 /* DSP3_DM_START - [7:0] */
+
+/*
+ * R32769 (0x8001) - DSP3 DM 1
+ */
+#define WM5100_DSP3_DM_START_MASK 0xFFFF /* DSP3_DM_START - [15:0] */
+#define WM5100_DSP3_DM_START_SHIFT 0 /* DSP3_DM_START - [15:0] */
+#define WM5100_DSP3_DM_START_WIDTH 16 /* DSP3_DM_START - [15:0] */
+
+/*
+ * R32770 (0x8002) - DSP3 DM 2
+ */
+#define WM5100_DSP3_DM_1_1_MASK 0x00FF /* DSP3_DM_1 - [7:0] */
+#define WM5100_DSP3_DM_1_1_SHIFT 0 /* DSP3_DM_1 - [7:0] */
+#define WM5100_DSP3_DM_1_1_WIDTH 8 /* DSP3_DM_1 - [7:0] */
+
+/*
+ * R32771 (0x8003) - DSP3 DM 3
+ */
+#define WM5100_DSP3_DM_1_MASK 0xFFFF /* DSP3_DM_1 - [15:0] */
+#define WM5100_DSP3_DM_1_SHIFT 0 /* DSP3_DM_1 - [15:0] */
+#define WM5100_DSP3_DM_1_WIDTH 16 /* DSP3_DM_1 - [15:0] */
+
+/*
+ * R33276 (0x81FC) - DSP3 DM 508
+ */
+#define WM5100_DSP3_DM_254_1_MASK 0x00FF /* DSP3_DM_254 - [7:0] */
+#define WM5100_DSP3_DM_254_1_SHIFT 0 /* DSP3_DM_254 - [7:0] */
+#define WM5100_DSP3_DM_254_1_WIDTH 8 /* DSP3_DM_254 - [7:0] */
+
+/*
+ * R33277 (0x81FD) - DSP3 DM 509
+ */
+#define WM5100_DSP3_DM_254_MASK 0xFFFF /* DSP3_DM_254 - [15:0] */
+#define WM5100_DSP3_DM_254_SHIFT 0 /* DSP3_DM_254 - [15:0] */
+#define WM5100_DSP3_DM_254_WIDTH 16 /* DSP3_DM_254 - [15:0] */
+
+/*
+ * R33278 (0x81FE) - DSP3 DM 510
+ */
+#define WM5100_DSP3_DM_END_1_MASK 0x00FF /* DSP3_DM_END - [7:0] */
+#define WM5100_DSP3_DM_END_1_SHIFT 0 /* DSP3_DM_END - [7:0] */
+#define WM5100_DSP3_DM_END_1_WIDTH 8 /* DSP3_DM_END - [7:0] */
+
+/*
+ * R33279 (0x81FF) - DSP3 DM 511
+ */
+#define WM5100_DSP3_DM_END_MASK 0xFFFF /* DSP3_DM_END - [15:0] */
+#define WM5100_DSP3_DM_END_SHIFT 0 /* DSP3_DM_END - [15:0] */
+#define WM5100_DSP3_DM_END_WIDTH 16 /* DSP3_DM_END - [15:0] */
+
+/*
+ * R34816 (0x8800) - DSP3 PM 0
+ */
+#define WM5100_DSP3_PM_START_2_MASK 0x00FF /* DSP3_PM_START - [7:0] */
+#define WM5100_DSP3_PM_START_2_SHIFT 0 /* DSP3_PM_START - [7:0] */
+#define WM5100_DSP3_PM_START_2_WIDTH 8 /* DSP3_PM_START - [7:0] */
+
+/*
+ * R34817 (0x8801) - DSP3 PM 1
+ */
+#define WM5100_DSP3_PM_START_1_MASK 0xFFFF /* DSP3_PM_START - [15:0] */
+#define WM5100_DSP3_PM_START_1_SHIFT 0 /* DSP3_PM_START - [15:0] */
+#define WM5100_DSP3_PM_START_1_WIDTH 16 /* DSP3_PM_START - [15:0] */
+
+/*
+ * R34818 (0x8802) - DSP3 PM 2
+ */
+#define WM5100_DSP3_PM_START_MASK 0xFFFF /* DSP3_PM_START - [15:0] */
+#define WM5100_DSP3_PM_START_SHIFT 0 /* DSP3_PM_START - [15:0] */
+#define WM5100_DSP3_PM_START_WIDTH 16 /* DSP3_PM_START - [15:0] */
+
+/*
+ * R34819 (0x8803) - DSP3 PM 3
+ */
+#define WM5100_DSP3_PM_1_2_MASK 0x00FF /* DSP3_PM_1 - [7:0] */
+#define WM5100_DSP3_PM_1_2_SHIFT 0 /* DSP3_PM_1 - [7:0] */
+#define WM5100_DSP3_PM_1_2_WIDTH 8 /* DSP3_PM_1 - [7:0] */
+
+/*
+ * R34820 (0x8804) - DSP3 PM 4
+ */
+#define WM5100_DSP3_PM_1_1_MASK 0xFFFF /* DSP3_PM_1 - [15:0] */
+#define WM5100_DSP3_PM_1_1_SHIFT 0 /* DSP3_PM_1 - [15:0] */
+#define WM5100_DSP3_PM_1_1_WIDTH 16 /* DSP3_PM_1 - [15:0] */
+
+/*
+ * R34821 (0x8805) - DSP3 PM 5
+ */
+#define WM5100_DSP3_PM_1_MASK 0xFFFF /* DSP3_PM_1 - [15:0] */
+#define WM5100_DSP3_PM_1_SHIFT 0 /* DSP3_PM_1 - [15:0] */
+#define WM5100_DSP3_PM_1_WIDTH 16 /* DSP3_PM_1 - [15:0] */
+
+/*
+ * R36346 (0x8DFA) - DSP3 PM 1530
+ */
+#define WM5100_DSP3_PM_510_2_MASK 0x00FF /* DSP3_PM_510 - [7:0] */
+#define WM5100_DSP3_PM_510_2_SHIFT 0 /* DSP3_PM_510 - [7:0] */
+#define WM5100_DSP3_PM_510_2_WIDTH 8 /* DSP3_PM_510 - [7:0] */
+
+/*
+ * R36347 (0x8DFB) - DSP3 PM 1531
+ */
+#define WM5100_DSP3_PM_510_1_MASK 0xFFFF /* DSP3_PM_510 - [15:0] */
+#define WM5100_DSP3_PM_510_1_SHIFT 0 /* DSP3_PM_510 - [15:0] */
+#define WM5100_DSP3_PM_510_1_WIDTH 16 /* DSP3_PM_510 - [15:0] */
+
+/*
+ * R36348 (0x8DFC) - DSP3 PM 1532
+ */
+#define WM5100_DSP3_PM_510_MASK 0xFFFF /* DSP3_PM_510 - [15:0] */
+#define WM5100_DSP3_PM_510_SHIFT 0 /* DSP3_PM_510 - [15:0] */
+#define WM5100_DSP3_PM_510_WIDTH 16 /* DSP3_PM_510 - [15:0] */
+
+/*
+ * R36349 (0x8DFD) - DSP3 PM 1533
+ */
+#define WM5100_DSP3_PM_END_2_MASK 0x00FF /* DSP3_PM_END - [7:0] */
+#define WM5100_DSP3_PM_END_2_SHIFT 0 /* DSP3_PM_END - [7:0] */
+#define WM5100_DSP3_PM_END_2_WIDTH 8 /* DSP3_PM_END - [7:0] */
+
+/*
+ * R36350 (0x8DFE) - DSP3 PM 1534
+ */
+#define WM5100_DSP3_PM_END_1_MASK 0xFFFF /* DSP3_PM_END - [15:0] */
+#define WM5100_DSP3_PM_END_1_SHIFT 0 /* DSP3_PM_END - [15:0] */
+#define WM5100_DSP3_PM_END_1_WIDTH 16 /* DSP3_PM_END - [15:0] */
+
+/*
+ * R36351 (0x8DFF) - DSP3 PM 1535
+ */
+#define WM5100_DSP3_PM_END_MASK 0xFFFF /* DSP3_PM_END - [15:0] */
+#define WM5100_DSP3_PM_END_SHIFT 0 /* DSP3_PM_END - [15:0] */
+#define WM5100_DSP3_PM_END_WIDTH 16 /* DSP3_PM_END - [15:0] */
+
+/*
+ * R36864 (0x9000) - DSP3 ZM 0
+ */
+#define WM5100_DSP3_ZM_START_1_MASK 0x00FF /* DSP3_ZM_START - [7:0] */
+#define WM5100_DSP3_ZM_START_1_SHIFT 0 /* DSP3_ZM_START - [7:0] */
+#define WM5100_DSP3_ZM_START_1_WIDTH 8 /* DSP3_ZM_START - [7:0] */
+
+/*
+ * R36865 (0x9001) - DSP3 ZM 1
+ */
+#define WM5100_DSP3_ZM_START_MASK 0xFFFF /* DSP3_ZM_START - [15:0] */
+#define WM5100_DSP3_ZM_START_SHIFT 0 /* DSP3_ZM_START - [15:0] */
+#define WM5100_DSP3_ZM_START_WIDTH 16 /* DSP3_ZM_START - [15:0] */
+
+/*
+ * R36866 (0x9002) - DSP3 ZM 2
+ */
+#define WM5100_DSP3_ZM_1_1_MASK 0x00FF /* DSP3_ZM_1 - [7:0] */
+#define WM5100_DSP3_ZM_1_1_SHIFT 0 /* DSP3_ZM_1 - [7:0] */
+#define WM5100_DSP3_ZM_1_1_WIDTH 8 /* DSP3_ZM_1 - [7:0] */
+
+/*
+ * R36867 (0x9003) - DSP3 ZM 3
+ */
+#define WM5100_DSP3_ZM_1_MASK 0xFFFF /* DSP3_ZM_1 - [15:0] */
+#define WM5100_DSP3_ZM_1_SHIFT 0 /* DSP3_ZM_1 - [15:0] */
+#define WM5100_DSP3_ZM_1_WIDTH 16 /* DSP3_ZM_1 - [15:0] */
+
+/*
+ * R38908 (0x97FC) - DSP3 ZM 2044
+ */
+#define WM5100_DSP3_ZM_1022_1_MASK 0x00FF /* DSP3_ZM_1022 - [7:0] */
+#define WM5100_DSP3_ZM_1022_1_SHIFT 0 /* DSP3_ZM_1022 - [7:0] */
+#define WM5100_DSP3_ZM_1022_1_WIDTH 8 /* DSP3_ZM_1022 - [7:0] */
+
+/*
+ * R38909 (0x97FD) - DSP3 ZM 2045
+ */
+#define WM5100_DSP3_ZM_1022_MASK 0xFFFF /* DSP3_ZM_1022 - [15:0] */
+#define WM5100_DSP3_ZM_1022_SHIFT 0 /* DSP3_ZM_1022 - [15:0] */
+#define WM5100_DSP3_ZM_1022_WIDTH 16 /* DSP3_ZM_1022 - [15:0] */
+
+/*
+ * R38910 (0x97FE) - DSP3 ZM 2046
+ */
+#define WM5100_DSP3_ZM_END_1_MASK 0x00FF /* DSP3_ZM_END - [7:0] */
+#define WM5100_DSP3_ZM_END_1_SHIFT 0 /* DSP3_ZM_END - [7:0] */
+#define WM5100_DSP3_ZM_END_1_WIDTH 8 /* DSP3_ZM_END - [7:0] */
+
+/*
+ * R38911 (0x97FF) - DSP3 ZM 2047
+ */
+#define WM5100_DSP3_ZM_END_MASK 0xFFFF /* DSP3_ZM_END - [15:0] */
+#define WM5100_DSP3_ZM_END_SHIFT 0 /* DSP3_ZM_END - [15:0] */
+#define WM5100_DSP3_ZM_END_WIDTH 16 /* DSP3_ZM_END - [15:0] */
+
+int wm5100_readable_register(struct snd_soc_codec *codec, unsigned int reg);
+int wm5100_volatile_register(struct snd_soc_codec *codec, unsigned int reg);
+
+extern u16 wm5100_reg_defaults[WM5100_MAX_REGISTER + 1];
+
+#endif
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 6d6dc9e..35f3ad83 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -355,7 +355,7 @@
return 1;
}
- ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret < 0)
return ret;
@@ -392,23 +392,9 @@
break;
}
- return snd_soc_get_volsw_2r(kcontrol, ucontrol);
+ return snd_soc_get_volsw(kcontrol, ucontrol);
}
-/* double control with volume update */
-#define SOC_WM8350_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
- xinvert, tlv_array) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
- SNDRV_CTL_ELEM_ACCESS_READWRITE | \
- SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
- .tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw_2r, \
- .get = wm8350_get_volsw_2r, .put = wm8350_put_volsw_2r_vu, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
- .rshift = xshift, .max = xmax, .invert = xinvert}, }
-
static const char *wm8350_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
static const char *wm8350_pol[] = { "Normal", "Inv R", "Inv L", "Inv L & R" };
static const char *wm8350_dacmutem[] = { "Normal", "Soft" };
@@ -443,26 +429,29 @@
static const struct snd_kcontrol_new wm8350_snd_controls[] = {
SOC_ENUM("Playback Deemphasis", wm8350_enum[0]),
SOC_ENUM("Playback DAC Inversion", wm8350_enum[1]),
- SOC_WM8350_DOUBLE_R_TLV("Playback PCM Volume",
+ SOC_DOUBLE_R_EXT_TLV("Playback PCM Volume",
WM8350_DAC_DIGITAL_VOLUME_L,
WM8350_DAC_DIGITAL_VOLUME_R,
- 0, 255, 0, dac_pcm_tlv),
+ 0, 255, 0, wm8350_get_volsw_2r,
+ wm8350_put_volsw_2r_vu, dac_pcm_tlv),
SOC_ENUM("Playback PCM Mute Function", wm8350_enum[2]),
SOC_ENUM("Playback PCM Mute Speed", wm8350_enum[3]),
SOC_ENUM("Capture PCM Filter", wm8350_enum[4]),
SOC_ENUM("Capture PCM HP Filter", wm8350_enum[5]),
SOC_ENUM("Capture ADC Inversion", wm8350_enum[6]),
- SOC_WM8350_DOUBLE_R_TLV("Capture PCM Volume",
+ SOC_DOUBLE_R_EXT_TLV("Capture PCM Volume",
WM8350_ADC_DIGITAL_VOLUME_L,
WM8350_ADC_DIGITAL_VOLUME_R,
- 0, 255, 0, adc_pcm_tlv),
+ 0, 255, 0, wm8350_get_volsw_2r,
+ wm8350_put_volsw_2r_vu, adc_pcm_tlv),
SOC_DOUBLE_TLV("Capture Sidetone Volume",
WM8350_ADC_DIVIDER,
8, 4, 15, 1, capture_sd_tlv),
- SOC_WM8350_DOUBLE_R_TLV("Capture Volume",
+ SOC_DOUBLE_R_EXT_TLV("Capture Volume",
WM8350_LEFT_INPUT_VOLUME,
WM8350_RIGHT_INPUT_VOLUME,
- 2, 63, 0, pre_amp_tlv),
+ 2, 63, 0, wm8350_get_volsw_2r,
+ wm8350_put_volsw_2r_vu, pre_amp_tlv),
SOC_DOUBLE_R("Capture ZC Switch",
WM8350_LEFT_INPUT_VOLUME,
WM8350_RIGHT_INPUT_VOLUME, 13, 1, 0),
@@ -490,17 +479,19 @@
SOC_SINGLE_TLV("Out4 Capture Volume",
WM8350_INPUT_MIXER_VOLUME,
1, 7, 0, out_mix_tlv),
- SOC_WM8350_DOUBLE_R_TLV("Out1 Playback Volume",
+ SOC_DOUBLE_R_EXT_TLV("Out1 Playback Volume",
WM8350_LOUT1_VOLUME,
WM8350_ROUT1_VOLUME,
- 2, 63, 0, out_pga_tlv),
+ 2, 63, 0, wm8350_get_volsw_2r,
+ wm8350_put_volsw_2r_vu, out_pga_tlv),
SOC_DOUBLE_R("Out1 Playback ZC Switch",
WM8350_LOUT1_VOLUME,
WM8350_ROUT1_VOLUME, 13, 1, 0),
- SOC_WM8350_DOUBLE_R_TLV("Out2 Playback Volume",
+ SOC_DOUBLE_R_EXT_TLV("Out2 Playback Volume",
WM8350_LOUT2_VOLUME,
WM8350_ROUT2_VOLUME,
- 2, 63, 0, out_pga_tlv),
+ 2, 63, 0, wm8350_get_volsw_2r,
+ wm8350_put_volsw_2r_vu, out_pga_tlv),
SOC_DOUBLE_R("Out2 Playback ZC Switch", WM8350_LOUT2_VOLUME,
WM8350_ROUT2_VOLUME, 13, 1, 0),
SOC_SINGLE("Out2 Right Invert Switch", WM8350_ROUT2_VOLUME, 10, 1, 0),
diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c
index fbee556c..dc13be2 100644
--- a/sound/soc/codecs/wm8400.c
+++ b/sound/soc/codecs/wm8400.c
@@ -383,7 +383,7 @@
(1 << WM8400_AINRMUX_PWR))) {
reg |= WM8400_AINR_ENA;
} else {
- reg &= ~WM8400_AINL_ENA;
+ reg &= ~WM8400_AINR_ENA;
}
wm8400_write(w->codec, WM8400_POWER_MANAGEMENT_2, reg);
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index db0dced..07c9cc7 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -479,6 +480,8 @@
power1 |= WM8510_POWER1_BIASEN | WM8510_POWER1_BUFIOEN;
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ snd_soc_cache_sync(codec);
+
/* Initial cap charge at VMID 5k */
snd_soc_write(codec, WM8510_POWER1, power1 | 0x3);
mdelay(100);
@@ -540,18 +543,7 @@
static int wm8510_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8510_reg); i++) {
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
@@ -598,6 +590,11 @@
.reg_cache_default =wm8510_reg,
};
+static const struct of_device_id wm8510_of_match[] = {
+ { .compatible = "wlf,wm8510" },
+ { },
+};
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8510_spi_probe(struct spi_device *spi)
{
@@ -628,6 +625,7 @@
.driver = {
.name = "wm8510",
.owner = THIS_MODULE,
+ .of_match_table = wm8510_of_match,
},
.probe = wm8510_spi_probe,
.remove = __devexit_p(wm8510_spi_remove),
@@ -671,6 +669,7 @@
.driver = {
.name = "wm8510-codec",
.owner = THIS_MODULE,
+ .of_match_table = wm8510_of_match,
},
.probe = wm8510_i2c_probe,
.remove = __devexit_p(wm8510_i2c_remove),
diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
index 4fd4d8d..db7a681 100644
--- a/sound/soc/codecs/wm8523.c
+++ b/sound/soc/codecs/wm8523.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -84,7 +85,7 @@
static const struct soc_enum wm8523_zc_count =
SOC_ENUM_SINGLE(WM8523_ZERO_DETECT, 0, 2, wm8523_zd_count_text);
-static const struct snd_kcontrol_new wm8523_snd_controls[] = {
+static const struct snd_kcontrol_new wm8523_controls[] = {
SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR,
0, 448, 0, dac_tlv),
SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0),
@@ -101,22 +102,11 @@
SND_SOC_DAPM_OUTPUT("LINEVOUTR"),
};
-static const struct snd_soc_dapm_route intercon[] = {
+static const struct snd_soc_dapm_route wm8523_dapm_routes[] = {
{ "LINEVOUTL", NULL, "DAC" },
{ "LINEVOUTR", NULL, "DAC" },
};
-static int wm8523_add_widgets(struct snd_soc_codec *codec)
-{
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- snd_soc_dapm_new_controls(dapm, wm8523_dapm_widgets,
- ARRAY_SIZE(wm8523_dapm_widgets));
- snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
-
- return 0;
-}
-
static struct {
int value;
int ratio;
@@ -416,7 +406,6 @@
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
int ret, i;
- codec->hw_write = (hw_write_t)i2c_master_send;
wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0];
wm8523->rate_constraint.count =
ARRAY_SIZE(wm8523->rate_constraint_list);
@@ -479,10 +468,6 @@
/* Bias level configuration will have done an extra enable */
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
- snd_soc_add_controls(codec, wm8523_snd_controls,
- ARRAY_SIZE(wm8523_snd_controls));
- wm8523_add_widgets(codec);
-
return 0;
err_enable:
@@ -512,6 +497,18 @@
.reg_word_size = sizeof(u16),
.reg_cache_default = wm8523_reg,
.volatile_register = wm8523_volatile_register,
+
+ .controls = wm8523_controls,
+ .num_controls = ARRAY_SIZE(wm8523_controls),
+ .dapm_widgets = wm8523_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm8523_dapm_widgets),
+ .dapm_routes = wm8523_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(wm8523_dapm_routes),
+};
+
+static const struct of_device_id wm8523_of_match[] = {
+ { .compatible = "wlf,wm8523" },
+ { },
};
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
@@ -551,8 +548,9 @@
static struct i2c_driver wm8523_i2c_driver = {
.driver = {
- .name = "wm8523-codec",
+ .name = "wm8523",
.owner = THIS_MODULE,
+ .of_match_table = wm8523_of_match,
},
.probe = wm8523_i2c_probe,
.remove = __devexit_p(wm8523_i2c_remove),
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 4bbc0a79..8212b3c 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -212,7 +213,7 @@
reg_cache[reg] = 0;
reg_cache[reg2] = 0;
- ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret < 0)
return ret;
@@ -223,31 +224,19 @@
return 0;
}
-#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
- xinvert, tlv_array) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
- SNDRV_CTL_ELEM_ACCESS_READWRITE, \
- .tlv.p = (tlv_array), \
- .info = snd_soc_info_volsw_2r, \
- .get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
- .private_value = (unsigned long)&(struct soc_mixer_control) \
- {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
- .max = xmax, .invert = xinvert} }
-
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
-SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
- WM8580_DIGITAL_ATTENUATION_DACL1,
- WM8580_DIGITAL_ATTENUATION_DACR1,
- 0, 0xff, 0, dac_tlv),
-SOC_WM8580_OUT_DOUBLE_R_TLV("DAC2 Playback Volume",
- WM8580_DIGITAL_ATTENUATION_DACL2,
- WM8580_DIGITAL_ATTENUATION_DACR2,
- 0, 0xff, 0, dac_tlv),
-SOC_WM8580_OUT_DOUBLE_R_TLV("DAC3 Playback Volume",
- WM8580_DIGITAL_ATTENUATION_DACL3,
- WM8580_DIGITAL_ATTENUATION_DACR3,
- 0, 0xff, 0, dac_tlv),
+SOC_DOUBLE_R_EXT_TLV("DAC1 Playback Volume",
+ WM8580_DIGITAL_ATTENUATION_DACL1,
+ WM8580_DIGITAL_ATTENUATION_DACR1,
+ 0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
+SOC_DOUBLE_R_EXT_TLV("DAC2 Playback Volume",
+ WM8580_DIGITAL_ATTENUATION_DACL2,
+ WM8580_DIGITAL_ATTENUATION_DACR2,
+ 0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
+SOC_DOUBLE_R_EXT_TLV("DAC3 Playback Volume",
+ WM8580_DIGITAL_ATTENUATION_DACL3,
+ WM8580_DIGITAL_ATTENUATION_DACR3,
+ 0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0),
SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0),
@@ -441,8 +430,7 @@
/* Always disable the PLL - it is not safe to leave it running
* while reprogramming it.
*/
- reg = snd_soc_read(codec, WM8580_PWRDN2);
- snd_soc_write(codec, WM8580_PWRDN2, reg | pwr_mask);
+ snd_soc_update_bits(codec, WM8580_PWRDN2, pwr_mask, pwr_mask);
if (!freq_in || !freq_out)
return 0;
@@ -460,8 +448,7 @@
snd_soc_write(codec, WM8580_PLLA4 + offset, reg);
/* All done, turn it on */
- reg = snd_soc_read(codec, WM8580_PWRDN2);
- snd_soc_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
+ snd_soc_update_bits(codec, WM8580_PWRDN2, pwr_mask, 0);
return 0;
}
@@ -759,7 +746,6 @@
static int wm8580_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg;
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
@@ -768,20 +754,19 @@
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
/* Power up and get individual control of the DACs */
- reg = snd_soc_read(codec, WM8580_PWRDN1);
- reg &= ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD);
- snd_soc_write(codec, WM8580_PWRDN1, reg);
+ snd_soc_update_bits(codec, WM8580_PWRDN1,
+ WM8580_PWRDN1_PWDN |
+ WM8580_PWRDN1_ALLDACPD, 0);
/* Make VMID high impedance */
- reg = snd_soc_read(codec, WM8580_ADC_CONTROL1);
- reg &= ~0x100;
- snd_soc_write(codec, WM8580_ADC_CONTROL1, reg);
+ snd_soc_update_bits(codec, WM8580_ADC_CONTROL1,
+ 0x100, 0);
}
break;
case SND_SOC_BIAS_OFF:
- reg = snd_soc_read(codec, WM8580_PWRDN1);
- snd_soc_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
+ snd_soc_update_bits(codec, WM8580_PWRDN1,
+ WM8580_PWRDN1_PWDN, WM8580_PWRDN1_PWDN);
break;
}
codec->dapm.bias_level = level;
@@ -907,6 +892,11 @@
.reg_cache_default = wm8580_reg,
};
+static const struct of_device_id wm8580_of_match[] = {
+ { .compatible = "wlf,wm8580" },
+ { },
+};
+
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static int wm8580_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
@@ -943,8 +933,9 @@
static struct i2c_driver wm8580_i2c_driver = {
.driver = {
- .name = "wm8580-codec",
+ .name = "wm8580",
.owner = THIS_MODULE,
+ .of_match_table = wm8580_of_match,
},
.probe = wm8580_i2c_probe,
.remove = wm8580_i2c_remove,
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
index a537e4a..8d0347c 100644
--- a/sound/soc/codecs/wm8711.c
+++ b/sound/soc/codecs/wm8711.c
@@ -3,7 +3,7 @@
*
* Copyright 2006 Wolfson Microelectronics
*
- * Author: Mike Arthur <linux@wolfsonmicro.com>
+ * Author: Mike Arthur <Mike.Arthur@wolfsonmicro.com>
*
* Based on wm8731.c by Richard Purdie
*
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -286,7 +287,6 @@
return 0;
}
-
static int wm8711_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
@@ -299,6 +299,9 @@
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
+ snd_soc_cache_sync(codec);
+
snd_soc_write(codec, WM8711_PWR, reg | 0x0040);
break;
case SND_SOC_BIAS_OFF:
@@ -345,25 +348,14 @@
static int wm8711_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8711_reg); i++) {
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
wm8711_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
static int wm8711_probe(struct snd_soc_codec *codec)
{
struct wm8711_priv *wm8711 = snd_soc_codec_get_drvdata(codec);
- int ret, reg;
+ int ret;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8711->bus_type);
if (ret < 0) {
@@ -380,10 +372,8 @@
wm8711_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the update bits */
- reg = snd_soc_read(codec, WM8711_LOUT1V);
- snd_soc_write(codec, WM8711_LOUT1V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8711_ROUT1V);
- snd_soc_write(codec, WM8711_ROUT1V, reg | 0x0100);
+ snd_soc_update_bits(codec, WM8711_LOUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8711_ROUT1V, 0x0100, 0x0100);
snd_soc_add_controls(codec, wm8711_snd_controls,
ARRAY_SIZE(wm8711_snd_controls));
@@ -414,6 +404,12 @@
.num_dapm_routes = ARRAY_SIZE(wm8711_intercon),
};
+static const struct of_device_id wm8711_of_match[] = {
+ { .compatible = "wlf,wm8711", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8711_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8711_spi_probe(struct spi_device *spi)
{
@@ -443,8 +439,9 @@
static struct spi_driver wm8711_spi_driver = {
.driver = {
- .name = "wm8711-codec",
+ .name = "wm8711",
.owner = THIS_MODULE,
+ .of_match_table = wm8711_of_match,
},
.probe = wm8711_spi_probe,
.remove = __devexit_p(wm8711_spi_remove),
@@ -487,8 +484,9 @@
static struct i2c_driver wm8711_i2c_driver = {
.driver = {
- .name = "wm8711-codec",
+ .name = "wm8711",
.owner = THIS_MODULE,
+ .of_match_table = wm8711_of_match,
},
.probe = wm8711_i2c_probe,
.remove = __devexit_p(wm8711_i2c_remove),
diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c
index 86d4718..04b027e 100644
--- a/sound/soc/codecs/wm8728.c
+++ b/sound/soc/codecs/wm8728.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -269,6 +270,12 @@
.num_dapm_routes = ARRAY_SIZE(wm8728_intercon),
};
+static const struct of_device_id wm8728_of_match[] = {
+ { .compatible = "wlf,wm8728", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8728_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8728_spi_probe(struct spi_device *spi)
{
@@ -298,8 +305,9 @@
static struct spi_driver wm8728_spi_driver = {
.driver = {
- .name = "wm8728-codec",
+ .name = "wm8728",
.owner = THIS_MODULE,
+ .of_match_table = wm8728_of_match,
},
.probe = wm8728_spi_probe,
.remove = __devexit_p(wm8728_spi_remove),
@@ -342,8 +350,9 @@
static struct i2c_driver wm8728_i2c_driver = {
.driver = {
- .name = "wm8728-codec",
+ .name = "wm8728",
.owner = THIS_MODULE,
+ .of_match_table = wm8728_of_match,
},
.probe = wm8728_i2c_probe,
.remove = __devexit_p(wm8728_i2c_remove),
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 76b4361..7e5ec03 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -426,9 +427,7 @@
enum snd_soc_bias_level level)
{
struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
- int i, ret;
- u8 data[2];
- u16 *cache = codec->reg_cache;
+ int ret;
u16 reg;
switch (level) {
@@ -443,16 +442,7 @@
if (ret != 0)
return ret;
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8731_reg); i++) {
- if (cache[i] == wm8731_reg[i])
- continue;
-
- data[0] = (i << 1) | ((cache[i] >> 8)
- & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
+ snd_soc_cache_sync(codec);
}
/* Clear PWROFF, gate CLKOUT, everything else as-is */
@@ -607,6 +597,13 @@
.num_dapm_routes = ARRAY_SIZE(wm8731_intercon),
};
+static const struct of_device_id wm8731_of_match[] = {
+ { .compatible = "wlf,wm8731", },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, wm8731_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8731_spi_probe(struct spi_device *spi)
{
@@ -638,6 +635,7 @@
.driver = {
.name = "wm8731",
.owner = THIS_MODULE,
+ .of_match_table = wm8731_of_match,
},
.probe = wm8731_spi_probe,
.remove = __devexit_p(wm8731_spi_remove),
@@ -682,6 +680,7 @@
.driver = {
.name = "wm8731",
.owner = THIS_MODULE,
+ .of_match_table = wm8731_of_match,
},
.probe = wm8731_i2c_probe,
.remove = __devexit_p(wm8731_i2c_remove),
diff --git a/sound/soc/codecs/wm8737.c b/sound/soc/codecs/wm8737.c
index 30c67d0..f6aef58 100644
--- a/sound/soc/codecs/wm8737.c
+++ b/sound/soc/codecs/wm8737.c
@@ -20,6 +20,7 @@
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -634,6 +635,13 @@
.reg_cache_default = wm8737_reg,
};
+static const struct of_device_id wm8737_of_match[] = {
+ { .compatible = "wlf,wm8737", },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, wm8737_of_match);
+
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static __devinit int wm8737_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
@@ -673,6 +681,7 @@
.driver = {
.name = "wm8737",
.owner = THIS_MODULE,
+ .of_match_table = wm8737_of_match,
},
.probe = wm8737_i2c_probe,
.remove = __devexit_p(wm8737_i2c_remove),
@@ -711,6 +720,7 @@
.driver = {
.name = "wm8737",
.owner = THIS_MODULE,
+ .of_match_table = wm8737_of_match,
},
.probe = wm8737_spi_probe,
.remove = __devexit_p(wm8737_spi_remove),
diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c
index 25af901..57ad22a 100644
--- a/sound/soc/codecs/wm8741.c
+++ b/sound/soc/codecs/wm8741.c
@@ -17,9 +17,11 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -337,10 +339,10 @@
iface |= 0x0004;
break;
case SND_SOC_DAIFMT_DSP_A:
- iface |= 0x0003;
+ iface |= 0x000C;
break;
case SND_SOC_DAIFMT_DSP_B:
- iface |= 0x0013;
+ iface |= 0x001C;
break;
default:
return -EINVAL;
@@ -402,15 +404,7 @@
#ifdef CONFIG_PM
static int wm8741_resume(struct snd_soc_codec *codec)
{
- u16 *cache = codec->reg_cache;
- int i;
-
- /* RESTORE REG Cache */
- for (i = 0; i < WM8741_REGISTER_COUNT; i++) {
- if (cache[i] == wm8741_reg_defaults[i] || WM8741_RESET == i)
- continue;
- snd_soc_write(codec, i, cache[i]);
- }
+ snd_soc_cache_sync(codec);
return 0;
}
#else
@@ -422,17 +416,35 @@
{
struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
int ret = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8741->supplies); i++)
+ wm8741->supplies[i].supply = wm8741_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8741->supplies),
+ wm8741->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8741->supplies),
+ wm8741->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_get;
+ }
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8741->control_type);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
- return ret;
+ goto err_enable;
}
ret = wm8741_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
- return ret;
+ goto err_enable;
}
/* Change some default settings - latch VU */
@@ -442,7 +454,7 @@
WM8741_UPDATELM, WM8741_UPDATELM);
snd_soc_update_bits(codec, WM8741_DACRLSB_ATTENUATION,
WM8741_UPDATERL, WM8741_UPDATERL);
- snd_soc_update_bits(codec, WM8741_DACRLSB_ATTENUATION,
+ snd_soc_update_bits(codec, WM8741_DACRMSB_ATTENUATION,
WM8741_UPDATERM, WM8741_UPDATERM);
snd_soc_add_controls(codec, wm8741_snd_controls,
@@ -451,58 +463,61 @@
dev_dbg(codec->dev, "Successful registration\n");
return ret;
+
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
+err:
+ return ret;
+}
+
+static int wm8741_remove(struct snd_soc_codec *codec)
+{
+ struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
+ regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
+
+ return 0;
}
static struct snd_soc_codec_driver soc_codec_dev_wm8741 = {
.probe = wm8741_probe,
+ .remove = wm8741_remove,
.resume = wm8741_resume,
.reg_cache_size = ARRAY_SIZE(wm8741_reg_defaults),
.reg_word_size = sizeof(u16),
.reg_cache_default = wm8741_reg_defaults,
};
+static const struct of_device_id wm8741_of_match[] = {
+ { .compatible = "wlf,wm8741", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8741_of_match);
+
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static int wm8741_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8741_priv *wm8741;
- int ret, i;
+ int ret;
wm8741 = kzalloc(sizeof(struct wm8741_priv), GFP_KERNEL);
if (wm8741 == NULL)
return -ENOMEM;
- for (i = 0; i < ARRAY_SIZE(wm8741->supplies); i++)
- wm8741->supplies[i].supply = wm8741_supply_names[i];
-
- ret = regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8741->supplies),
- wm8741->supplies);
- if (ret != 0) {
- dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
- goto err;
- }
-
- ret = regulator_bulk_enable(ARRAY_SIZE(wm8741->supplies),
- wm8741->supplies);
- if (ret != 0) {
- dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
- goto err_get;
- }
-
i2c_set_clientdata(i2c, wm8741);
wm8741->control_type = SND_SOC_I2C;
- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_wm8741, &wm8741_dai, 1);
- if (ret < 0)
- goto err_enable;
+ ret = snd_soc_register_codec(&i2c->dev,
+ &soc_codec_dev_wm8741, &wm8741_dai, 1);
+ if (ret != 0)
+ goto err;
+
return ret;
-err_enable:
- regulator_bulk_disable(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
-
-err_get:
- regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
err:
kfree(wm8741);
return ret;
@@ -510,10 +525,7 @@
static int wm8741_i2c_remove(struct i2c_client *client)
{
- struct wm8741_priv *wm8741 = i2c_get_clientdata(client);
-
snd_soc_unregister_codec(&client->dev);
- regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
kfree(i2c_get_clientdata(client));
return 0;
}
@@ -526,8 +538,9 @@
static struct i2c_driver wm8741_i2c_driver = {
.driver = {
- .name = "wm8741-codec",
+ .name = "wm8741",
.owner = THIS_MODULE,
+ .of_match_table = wm8741_of_match,
},
.probe = wm8741_i2c_probe,
.remove = wm8741_i2c_remove,
@@ -535,6 +548,44 @@
};
#endif
+#if defined(CONFIG_SPI_MASTER)
+static int __devinit wm8741_spi_probe(struct spi_device *spi)
+{
+ struct wm8741_priv *wm8741;
+ int ret;
+
+ wm8741 = kzalloc(sizeof(struct wm8741_priv), GFP_KERNEL);
+ if (wm8741 == NULL)
+ return -ENOMEM;
+
+ wm8741->control_type = SND_SOC_SPI;
+ spi_set_drvdata(spi, wm8741);
+
+ ret = snd_soc_register_codec(&spi->dev,
+ &soc_codec_dev_wm8741, &wm8741_dai, 1);
+ if (ret < 0)
+ kfree(wm8741);
+ return ret;
+}
+
+static int __devexit wm8741_spi_remove(struct spi_device *spi)
+{
+ snd_soc_unregister_codec(&spi->dev);
+ kfree(spi_get_drvdata(spi));
+ return 0;
+}
+
+static struct spi_driver wm8741_spi_driver = {
+ .driver = {
+ .name = "wm8741",
+ .owner = THIS_MODULE,
+ .of_match_table = wm8741_of_match,
+ },
+ .probe = wm8741_spi_probe,
+ .remove = __devexit_p(wm8741_spi_remove),
+};
+#endif /* CONFIG_SPI_MASTER */
+
static int __init wm8741_modinit(void)
{
int ret = 0;
@@ -544,6 +595,13 @@
if (ret != 0)
pr_err("Failed to register WM8741 I2C driver: %d\n", ret);
#endif
+#if defined(CONFIG_SPI_MASTER)
+ ret = spi_register_driver(&wm8741_spi_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register wm8741 SPI driver: %d\n",
+ ret);
+ }
+#endif
return ret;
}
@@ -551,6 +609,9 @@
static void __exit wm8741_exit(void)
{
+#if defined(CONFIG_SPI_MASTER)
+ spi_unregister_driver(&wm8741_spi_driver);
+#endif
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8741_i2c_driver);
#endif
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index d0003cc..ca75a81 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -615,6 +616,8 @@
break;
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ snd_soc_cache_sync(codec);
+
/* Set VMID to 5k */
snd_soc_write(codec, WM8750_PWR1, pwr_reg | 0x01c1);
@@ -672,28 +675,14 @@
static int wm8750_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8750_reg); i++) {
- if (i == WM8750_RESET)
- continue;
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
-
wm8750_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
static int wm8750_probe(struct snd_soc_codec *codec)
{
struct wm8750_priv *wm8750 = snd_soc_codec_get_drvdata(codec);
- int reg, ret;
+ int ret;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8750->control_type);
if (ret < 0) {
@@ -711,22 +700,14 @@
wm8750_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* set the update bits */
- reg = snd_soc_read(codec, WM8750_LDAC);
- snd_soc_write(codec, WM8750_LDAC, reg | 0x0100);
- reg = snd_soc_read(codec, WM8750_RDAC);
- snd_soc_write(codec, WM8750_RDAC, reg | 0x0100);
- reg = snd_soc_read(codec, WM8750_LOUT1V);
- snd_soc_write(codec, WM8750_LOUT1V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8750_ROUT1V);
- snd_soc_write(codec, WM8750_ROUT1V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8750_LOUT2V);
- snd_soc_write(codec, WM8750_LOUT2V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8750_ROUT2V);
- snd_soc_write(codec, WM8750_ROUT2V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8750_LINVOL);
- snd_soc_write(codec, WM8750_LINVOL, reg | 0x0100);
- reg = snd_soc_read(codec, WM8750_RINVOL);
- snd_soc_write(codec, WM8750_RINVOL, reg | 0x0100);
+ snd_soc_update_bits(codec, WM8750_LDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8750_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8750_LOUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8750_ROUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8750_LOUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8750_ROUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8750_LINVOL, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8750_RINVOL, 0x0100, 0x0100);
snd_soc_add_controls(codec, wm8750_snd_controls,
ARRAY_SIZE(wm8750_snd_controls));
@@ -751,6 +732,13 @@
.reg_cache_default = wm8750_reg,
};
+static const struct of_device_id wm8750_of_match[] = {
+ { .compatible = "wlf,wm8750", },
+ { .compatible = "wlf,wm8987", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8750_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8750_spi_probe(struct spi_device *spi)
{
@@ -787,8 +775,9 @@
static struct spi_driver wm8750_spi_driver = {
.driver = {
- .name = "wm8750-codec",
+ .name = "wm8750",
.owner = THIS_MODULE,
+ .of_match_table = wm8750_of_match,
},
.id_table = wm8750_spi_ids,
.probe = wm8750_spi_probe,
@@ -833,8 +822,9 @@
static struct i2c_driver wm8750_i2c_driver = {
.driver = {
- .name = "wm8750-codec",
+ .name = "wm8750",
.owner = THIS_MODULE,
+ .of_match_table = wm8750_of_match,
},
.probe = wm8750_i2c_probe,
.remove = __devexit_p(wm8750_i2c_remove),
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index aa091a0..a950471 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -38,6 +38,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
@@ -1490,6 +1491,12 @@
.reg_cache_default = wm8753_reg,
};
+static const struct of_device_id wm8753_of_match[] = {
+ { .compatible = "wlf,wm8753", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8753_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8753_spi_probe(struct spi_device *spi)
{
@@ -1519,8 +1526,9 @@
static struct spi_driver wm8753_spi_driver = {
.driver = {
- .name = "wm8753-codec",
+ .name = "wm8753",
.owner = THIS_MODULE,
+ .of_match_table = wm8753_of_match,
},
.probe = wm8753_spi_probe,
.remove = __devexit_p(wm8753_spi_remove),
@@ -1563,8 +1571,9 @@
static struct i2c_driver wm8753_i2c_driver = {
.driver = {
- .name = "wm8753-codec",
+ .name = "wm8753",
.owner = THIS_MODULE,
+ .of_match_table = wm8753_of_match,
},
.probe = wm8753_i2c_probe,
.remove = __devexit_p(wm8753_i2c_remove),
diff --git a/sound/soc/codecs/wm8770.c b/sound/soc/codecs/wm8770.c
index 19b92ba..aa05e65 100644
--- a/sound/soc/codecs/wm8770.c
+++ b/sound/soc/codecs/wm8770.c
@@ -14,6 +14,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/of_device.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
@@ -684,6 +685,12 @@
.reg_cache_default = wm8770_reg_defs
};
+static const struct of_device_id wm8770_of_match[] = {
+ { .compatible = "wlf,wm8770", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8770_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8770_spi_probe(struct spi_device *spi)
{
@@ -715,6 +722,7 @@
.driver = {
.name = "wm8770",
.owner = THIS_MODULE,
+ .of_match_table = wm8770_of_match,
},
.probe = wm8770_spi_probe,
.remove = __devexit_p(wm8770_spi_remove)
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 8e7953b..bfdc523 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
@@ -215,8 +216,6 @@
int ratio_shift, master;
int i;
- iface = 0;
-
switch (dai->driver->id) {
case WM8776_DAI_DAC:
iface_reg = WM8776_DACIFCTRL;
@@ -232,20 +231,23 @@
return -EINVAL;
}
-
/* Set word length */
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
+ switch (snd_pcm_format_width(params_format(params))) {
+ case 16:
+ iface = 0;
+ case 20:
+ iface = 0x10;
break;
- case SNDRV_PCM_FORMAT_S20_3LE:
- iface |= 0x10;
+ case 24:
+ iface = 0x20;
break;
- case SNDRV_PCM_FORMAT_S24_LE:
- iface |= 0x20;
+ case 32:
+ iface = 0x30;
break;
- case SNDRV_PCM_FORMAT_S32_LE:
- iface |= 0x30;
- break;
+ default:
+ dev_err(codec->dev, "Unsupported sample size: %i\n",
+ snd_pcm_format_width(params_format(params)));
+ return -EINVAL;
}
/* Only need to set MCLK/LRCLK ratio if we're master */
@@ -306,6 +308,8 @@
break;
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ snd_soc_cache_sync(codec);
+
/* Disable the global powerdown; DAPM does the rest */
snd_soc_update_bits(codec, WM8776_PWRDOWN, 1, 0);
}
@@ -320,11 +324,6 @@
return 0;
}
-#define WM8776_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
- SNDRV_PCM_RATE_96000)
-
-
#define WM8776_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
@@ -349,7 +348,9 @@
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
- .rates = WM8776_RATES,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 32000,
+ .rate_max = 192000,
.formats = WM8776_FORMATS,
},
.ops = &wm8776_dac_ops,
@@ -361,7 +362,9 @@
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
- .rates = WM8776_RATES,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 32000,
+ .rate_max = 96000,
.formats = WM8776_FORMATS,
},
.ops = &wm8776_adc_ops,
@@ -378,21 +381,7 @@
static int wm8776_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8776_reg); i++) {
- if (cache[i] == wm8776_reg[i])
- continue;
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
-
wm8776_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
#else
@@ -452,6 +441,12 @@
.reg_cache_default = wm8776_reg,
};
+static const struct of_device_id wm8776_of_match[] = {
+ { .compatible = "wlf,wm8776", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8776_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8776_spi_probe(struct spi_device *spi)
{
@@ -481,8 +476,9 @@
static struct spi_driver wm8776_spi_driver = {
.driver = {
- .name = "wm8776-codec",
+ .name = "wm8776",
.owner = THIS_MODULE,
+ .of_match_table = wm8776_of_match,
},
.probe = wm8776_spi_probe,
.remove = __devexit_p(wm8776_spi_remove),
@@ -525,8 +521,9 @@
static struct i2c_driver wm8776_i2c_driver = {
.driver = {
- .name = "wm8776-codec",
+ .name = "wm8776",
.owner = THIS_MODULE,
+ .of_match_table = wm8776_of_match,
},
.probe = wm8776_i2c_probe,
.remove = __devexit_p(wm8776_i2c_remove),
diff --git a/sound/soc/codecs/wm8782.c b/sound/soc/codecs/wm8782.c
index a2a09f8..f2ced71 100644
--- a/sound/soc/codecs/wm8782.c
+++ b/sound/soc/codecs/wm8782.c
@@ -60,7 +60,7 @@
.owner = THIS_MODULE,
},
.probe = wm8782_probe,
- .remove = wm8782_remove,
+ .remove = __devexit_p(wm8782_remove),
};
static int __init wm8782_init(void)
diff --git a/sound/soc/codecs/wm8804.c b/sound/soc/codecs/wm8804.c
index 9a5e67c..9ee072b 100644
--- a/sound/soc/codecs/wm8804.c
+++ b/sound/soc/codecs/wm8804.c
@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
@@ -717,6 +718,12 @@
.volatile_register = wm8804_volatile
};
+static const struct of_device_id wm8804_of_match[] = {
+ { .compatible = "wlf,wm8804", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8804_of_match);
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8804_spi_probe(struct spi_device *spi)
{
@@ -748,6 +755,7 @@
.driver = {
.name = "wm8804",
.owner = THIS_MODULE,
+ .of_match_table = wm8804_of_match,
},
.probe = wm8804_spi_probe,
.remove = __devexit_p(wm8804_spi_remove)
@@ -792,6 +800,7 @@
.driver = {
.name = "wm8804",
.owner = THIS_MODULE,
+ .of_match_table = wm8804_of_match,
},
.probe = wm8804_i2c_probe,
.remove = __devexit_p(wm8804_i2c_remove),
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 082040e..3d0dc15 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -110,8 +110,8 @@
#define WM8900_REG_CLOCKING1_BCLK_DIR 0x1
#define WM8900_REG_CLOCKING1_MCLK_SRC 0x100
-#define WM8900_REG_CLOCKING1_BCLK_MASK (~0x01e)
-#define WM8900_REG_CLOCKING1_OPCLK_MASK (~0x7000)
+#define WM8900_REG_CLOCKING1_BCLK_MASK 0x01e
+#define WM8900_REG_CLOCKING1_OPCLK_MASK 0x7000
#define WM8900_REG_CLOCKING2_ADC_CLKDIV 0xe0
#define WM8900_REG_CLOCKING2_DAC_CLKDIV 0x1c
@@ -135,7 +135,7 @@
#define WM8900_REG_HPCTL1_HP_SHORT 0x08
#define WM8900_REG_HPCTL1_HP_SHORT2 0x04
-#define WM8900_LRC_MASK 0xfc00
+#define WM8900_LRC_MASK 0x03ff
struct wm8900_priv {
enum snd_soc_control_type control_type;
@@ -742,26 +742,20 @@
{
struct wm8900_priv *wm8900 = snd_soc_codec_get_drvdata(codec);
struct _fll_div fll_div;
- unsigned int reg;
if (wm8900->fll_in == freq_in && wm8900->fll_out == freq_out)
return 0;
/* The digital side should be disabled during any change. */
- reg = snd_soc_read(codec, WM8900_REG_POWER1);
- snd_soc_write(codec, WM8900_REG_POWER1,
- reg & (~WM8900_REG_POWER1_FLL_ENA));
+ snd_soc_update_bits(codec, WM8900_REG_POWER1,
+ WM8900_REG_POWER1_FLL_ENA, 0);
/* Disable the FLL? */
if (!freq_in || !freq_out) {
- reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
- snd_soc_write(codec, WM8900_REG_CLOCKING1,
- reg & (~WM8900_REG_CLOCKING1_MCLK_SRC));
-
- reg = snd_soc_read(codec, WM8900_REG_FLLCTL1);
- snd_soc_write(codec, WM8900_REG_FLLCTL1,
- reg & (~WM8900_REG_FLLCTL1_OSC_ENA));
-
+ snd_soc_update_bits(codec, WM8900_REG_CLOCKING1,
+ WM8900_REG_CLOCKING1_MCLK_SRC, 0);
+ snd_soc_update_bits(codec, WM8900_REG_FLLCTL1,
+ WM8900_REG_FLLCTL1_OSC_ENA, 0);
wm8900->fll_in = freq_in;
wm8900->fll_out = freq_out;
@@ -796,15 +790,14 @@
else
snd_soc_write(codec, WM8900_REG_FLLCTL6, 0);
- reg = snd_soc_read(codec, WM8900_REG_POWER1);
- snd_soc_write(codec, WM8900_REG_POWER1,
- reg | WM8900_REG_POWER1_FLL_ENA);
+ snd_soc_update_bits(codec, WM8900_REG_POWER1,
+ WM8900_REG_POWER1_FLL_ENA,
+ WM8900_REG_POWER1_FLL_ENA);
reenable:
- reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
- snd_soc_write(codec, WM8900_REG_CLOCKING1,
- reg | WM8900_REG_CLOCKING1_MCLK_SRC);
-
+ snd_soc_update_bits(codec, WM8900_REG_CLOCKING1,
+ WM8900_REG_CLOCKING1_MCLK_SRC,
+ WM8900_REG_CLOCKING1_MCLK_SRC);
return 0;
}
@@ -818,43 +811,35 @@
int div_id, int div)
{
struct snd_soc_codec *codec = codec_dai->codec;
- unsigned int reg;
switch (div_id) {
case WM8900_BCLK_DIV:
- reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
- snd_soc_write(codec, WM8900_REG_CLOCKING1,
- div | (reg & WM8900_REG_CLOCKING1_BCLK_MASK));
+ snd_soc_update_bits(codec, WM8900_REG_CLOCKING1,
+ WM8900_REG_CLOCKING1_BCLK_MASK, div);
break;
case WM8900_OPCLK_DIV:
- reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
- snd_soc_write(codec, WM8900_REG_CLOCKING1,
- div | (reg & WM8900_REG_CLOCKING1_OPCLK_MASK));
+ snd_soc_update_bits(codec, WM8900_REG_CLOCKING1,
+ WM8900_REG_CLOCKING1_OPCLK_MASK, div);
break;
case WM8900_DAC_LRCLK:
- reg = snd_soc_read(codec, WM8900_REG_AUDIO4);
- snd_soc_write(codec, WM8900_REG_AUDIO4,
- div | (reg & WM8900_LRC_MASK));
+ snd_soc_update_bits(codec, WM8900_REG_AUDIO4,
+ WM8900_LRC_MASK, div);
break;
case WM8900_ADC_LRCLK:
- reg = snd_soc_read(codec, WM8900_REG_AUDIO3);
- snd_soc_write(codec, WM8900_REG_AUDIO3,
- div | (reg & WM8900_LRC_MASK));
+ snd_soc_update_bits(codec, WM8900_REG_AUDIO3,
+ WM8900_LRC_MASK, div);
break;
case WM8900_DAC_CLKDIV:
- reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
- snd_soc_write(codec, WM8900_REG_CLOCKING2,
- div | (reg & WM8900_REG_CLOCKING2_DAC_CLKDIV));
+ snd_soc_update_bits(codec, WM8900_REG_CLOCKING2,
+ WM8900_REG_CLOCKING2_DAC_CLKDIV, div);
break;
case WM8900_ADC_CLKDIV:
- reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
- snd_soc_write(codec, WM8900_REG_CLOCKING2,
- div | (reg & WM8900_REG_CLOCKING2_ADC_CLKDIV));
+ snd_soc_update_bits(codec, WM8900_REG_CLOCKING2,
+ WM8900_REG_CLOCKING2_ADC_CLKDIV, div);
break;
case WM8900_LRCLK_MODE:
- reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
- snd_soc_write(codec, WM8900_REG_DACCTRL,
- div | (reg & WM8900_REG_DACCTRL_AIF_LRCLKRATE));
+ snd_soc_update_bits(codec, WM8900_REG_DACCTRL,
+ WM8900_REG_DACCTRL_AIF_LRCLKRATE, div);
break;
default:
return -EINVAL;
@@ -1037,12 +1022,12 @@
switch (level) {
case SND_SOC_BIAS_ON:
/* Enable thermal shutdown */
- reg = snd_soc_read(codec, WM8900_REG_GPIO);
- snd_soc_write(codec, WM8900_REG_GPIO,
- reg | WM8900_REG_GPIO_TEMP_ENA);
- reg = snd_soc_read(codec, WM8900_REG_ADDCTL);
- snd_soc_write(codec, WM8900_REG_ADDCTL,
- reg | WM8900_REG_ADDCTL_TEMP_SD);
+ snd_soc_update_bits(codec, WM8900_REG_GPIO,
+ WM8900_REG_GPIO_TEMP_ENA,
+ WM8900_REG_GPIO_TEMP_ENA);
+ snd_soc_update_bits(codec, WM8900_REG_ADDCTL,
+ WM8900_REG_ADDCTL_TEMP_SD,
+ WM8900_REG_ADDCTL_TEMP_SD);
break;
case SND_SOC_BIAS_PREPARE:
@@ -1205,26 +1190,16 @@
wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the volume update bits */
- snd_soc_write(codec, WM8900_REG_LINVOL,
- snd_soc_read(codec, WM8900_REG_LINVOL) | 0x100);
- snd_soc_write(codec, WM8900_REG_RINVOL,
- snd_soc_read(codec, WM8900_REG_RINVOL) | 0x100);
- snd_soc_write(codec, WM8900_REG_LOUT1CTL,
- snd_soc_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
- snd_soc_write(codec, WM8900_REG_ROUT1CTL,
- snd_soc_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
- snd_soc_write(codec, WM8900_REG_LOUT2CTL,
- snd_soc_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
- snd_soc_write(codec, WM8900_REG_ROUT2CTL,
- snd_soc_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
- snd_soc_write(codec, WM8900_REG_LDAC_DV,
- snd_soc_read(codec, WM8900_REG_LDAC_DV) | 0x100);
- snd_soc_write(codec, WM8900_REG_RDAC_DV,
- snd_soc_read(codec, WM8900_REG_RDAC_DV) | 0x100);
- snd_soc_write(codec, WM8900_REG_LADC_DV,
- snd_soc_read(codec, WM8900_REG_LADC_DV) | 0x100);
- snd_soc_write(codec, WM8900_REG_RADC_DV,
- snd_soc_read(codec, WM8900_REG_RADC_DV) | 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_LINVOL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_RINVOL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_LOUT1CTL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_ROUT1CTL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_LOUT2CTL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_ROUT2CTL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_LDAC_DV, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_RDAC_DV, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_LADC_DV, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8900_REG_RADC_DV, 0x100, 0x100);
/* Set the DAC and mixer output bias */
snd_soc_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index b085575..9fc8f4c 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -50,7 +50,6 @@
struct wm8904_priv {
enum wm8904_type devtype;
- void *control_data;
struct regulator_bulk_data supplies[WM8904_NUM_SUPPLIES];
@@ -2540,7 +2539,6 @@
wm8904->devtype = id->driver_data;
i2c_set_clientdata(i2c, wm8904);
- wm8904->control_data = i2c;
wm8904->pdata = i2c->dev.platform_data;
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index 056daa0..dc5cb31 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -43,9 +43,19 @@
struct wm8940_priv {
unsigned int sysclk;
enum snd_soc_control_type control_type;
- void *control_data;
};
+static int wm8940_volatile_register(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ switch (reg) {
+ case WM8940_SOFTRESET:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static u16 wm8940_reg_defaults[] = {
0x8940, /* Soft Reset */
0x0000, /* Power 1 */
@@ -460,6 +470,14 @@
ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x1);
break;
case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ ret = snd_soc_cache_sync(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
+ return ret;
+ }
+ }
+
/* ensure bufioen and biasen */
pwr_reg |= (1 << 2) | (1 << 3);
/* set vmid to 300k for standby */
@@ -470,6 +488,8 @@
break;
}
+ codec->dapm.bias_level = level;
+
return ret;
}
@@ -660,30 +680,8 @@
static int wm8940_resume(struct snd_soc_codec *codec)
{
- int i;
- int ret;
- u8 data[3];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware
- * Could use auto incremented writes to speed this up
- */
- for (i = 0; i < ARRAY_SIZE(wm8940_reg_defaults); i++) {
- data[0] = i;
- data[1] = (cache[i] & 0xFF00) >> 8;
- data[2] = cache[i] & 0x00FF;
- ret = codec->hw_write(codec->control_data, data, 3);
- if (ret < 0)
- goto error_ret;
- else if (ret != 3) {
- ret = -EIO;
- goto error_ret;
- }
- }
- ret = wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
-error_ret:
- return ret;
+ wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ return 0;
}
static int wm8940_probe(struct snd_soc_codec *codec)
@@ -693,7 +691,6 @@
int ret;
u16 reg;
- codec->control_data = wm8940->control_data;
ret = snd_soc_codec_set_cache_io(codec, 8, 16, wm8940->control_type);
if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
@@ -744,6 +741,7 @@
.reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults),
.reg_word_size = sizeof(u16),
.reg_cache_default = wm8940_reg_defaults,
+ .volatile_register = wm8940_volatile_register,
};
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
@@ -758,7 +756,6 @@
return -ENOMEM;
i2c_set_clientdata(i2c, wm8940);
- wm8940->control_data = i2c;
wm8940->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 4393394..2df253c 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -72,7 +72,6 @@
struct wm8960_priv {
enum snd_soc_control_type control_type;
- void *control_data;
int (*set_bias_level)(struct snd_soc_codec *,
enum snd_soc_bias_level level);
struct snd_soc_dapm_widget *lout1;
@@ -575,6 +574,8 @@
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ snd_soc_cache_sync(codec);
+
/* Enable anti-pop features */
snd_soc_write(codec, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
@@ -677,6 +678,9 @@
WM8960_VREF | WM8960_VMID_MASK, 0);
break;
+ case SND_SOC_BIAS_OFF:
+ snd_soc_cache_sync(codec);
+ break;
default:
break;
}
@@ -902,16 +906,6 @@
static int wm8960_resume(struct snd_soc_codec *codec)
{
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8960_reg); i++) {
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
@@ -925,7 +919,6 @@
u16 reg;
wm8960->set_bias_level = wm8960_set_bias_level_out3;
- codec->control_data = wm8960->control_data;
if (!pdata) {
dev_warn(codec->dev, "No platform data supplied\n");
@@ -1015,7 +1008,6 @@
i2c_set_clientdata(i2c, wm8960);
wm8960->control_type = SND_SOC_I2C;
- wm8960->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8960, &wm8960_dai, 1);
diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index cdee810..9568c8a 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -974,7 +974,9 @@
}
/* This isn't volatile - readback doesn't correspond to write */
- reg = codec->hw_read(codec, WM8961_RIGHT_INPUT_VOLUME);
+ codec->cache_bypass = 1;
+ reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME);
+ codec->cache_bypass = 0;
dev_info(codec->dev, "WM8961 family %d revision %c\n",
(reg & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT,
((reg & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index d2c315f..f60dfa1 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -63,6 +63,8 @@
int fll_fref;
int fll_fout;
+ u16 dsp2_ena;
+
struct delayed_work mic_work;
struct snd_soc_jack *jack;
@@ -837,7 +839,7 @@
[40] = { 0x00FF, 0x01FF, 0x0000 }, /* R40 - SPKOUTL volume */
[41] = { 0x00FF, 0x01FF, 0x0000 }, /* R41 - SPKOUTR volume */
- [47] = { 0x000F, 0x0000, 0x0000 }, /* R47 - Thermal Shutdown Status */
+ [47] = { 0x000F, 0x0000, 0xFFFF }, /* R47 - Thermal Shutdown Status */
[48] = { 0x7EC7, 0x7E07, 0xFFFF }, /* R48 - Additional Control (4) */
[49] = { 0x00D3, 0x00D7, 0xFFFF }, /* R49 - Class D Control 1 */
[51] = { 0x0047, 0x0047, 0x0000 }, /* R51 - Class D Control 2 */
@@ -965,7 +967,7 @@
[584] = { 0x002D, 0x002D, 0x0000 }, /* R584 - IRQ Debounce */
[586] = { 0xC000, 0xC000, 0x0000 }, /* R586 - MICINT Source Pol */
[768] = { 0x0001, 0x0001, 0x0000 }, /* R768 - DSP2 Power Management */
- [1037] = { 0x0000, 0x003F, 0x0000 }, /* R1037 - DSP2_ExecControl */
+ [1037] = { 0x0000, 0x003F, 0xFFFF }, /* R1037 - DSP2_ExecControl */
[4096] = { 0x3FFF, 0x3FFF, 0x0000 }, /* R4096 - Write Sequencer 0 */
[4097] = { 0x00FF, 0x00FF, 0x0000 }, /* R4097 - Write Sequencer 1 */
[4098] = { 0x070F, 0x070F, 0x0000 }, /* R4098 - Write Sequencer 2 */
@@ -1986,6 +1988,122 @@
};
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static int wm8962_dsp2_write_config(struct snd_soc_codec *codec)
+{
+ return 0;
+}
+
+static int wm8962_dsp2_set_enable(struct snd_soc_codec *codec, u16 val)
+{
+ u16 adcl = snd_soc_read(codec, WM8962_LEFT_ADC_VOLUME);
+ u16 adcr = snd_soc_read(codec, WM8962_RIGHT_ADC_VOLUME);
+ u16 dac = snd_soc_read(codec, WM8962_ADC_DAC_CONTROL_1);
+
+ /* Mute the ADCs and DACs */
+ snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, 0);
+ snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, WM8962_ADC_VU);
+ snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
+ WM8962_DAC_MUTE, WM8962_DAC_MUTE);
+
+ snd_soc_write(codec, WM8962_SOUNDSTAGE_ENABLES_0, val);
+
+ /* Restore the ADCs and DACs */
+ snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, adcl);
+ snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, adcr);
+ snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
+ WM8962_DAC_MUTE, dac);
+
+ return 0;
+}
+
+static int wm8962_dsp2_start(struct snd_soc_codec *codec)
+{
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+
+ wm8962_dsp2_write_config(codec);
+
+ snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_RUNR);
+
+ wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena);
+
+ return 0;
+}
+
+static int wm8962_dsp2_stop(struct snd_soc_codec *codec)
+{
+ wm8962_dsp2_set_enable(codec, 0);
+
+ snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_STOP);
+
+ return 0;
+}
+
+#define WM8962_DSP2_ENABLE(xname, xshift) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = wm8962_dsp2_ena_info, \
+ .get = wm8962_dsp2_ena_get, .put = wm8962_dsp2_ena_put, \
+ .private_value = xshift }
+
+static int wm8962_dsp2_ena_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+
+ return 0;
+}
+
+static int wm8962_dsp2_ena_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int shift = kcontrol->private_value;
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+
+ ucontrol->value.integer.value[0] = !!(wm8962->dsp2_ena & 1 << shift);
+
+ return 0;
+}
+
+static int wm8962_dsp2_ena_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int shift = kcontrol->private_value;
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+ int old = wm8962->dsp2_ena;
+ int ret = 0;
+ int dsp2_running = snd_soc_read(codec, WM8962_DSP2_POWER_MANAGEMENT) &
+ WM8962_DSP2_ENA;
+
+ mutex_lock(&codec->mutex);
+
+ if (ucontrol->value.integer.value[0])
+ wm8962->dsp2_ena |= 1 << shift;
+ else
+ wm8962->dsp2_ena &= ~(1 << shift);
+
+ if (wm8962->dsp2_ena == old)
+ goto out;
+
+ ret = 1;
+
+ if (dsp2_running) {
+ if (wm8962->dsp2_ena)
+ wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena);
+ else
+ wm8962_dsp2_stop(codec);
+ }
+
+out:
+ mutex_unlock(&codec->mutex);
+
+ return ret;
+}
+
/* The VU bits for the headphones are in a different register to the mute
* bits and only take effect on the PGA if it is actually powered.
*/
@@ -2021,7 +2139,6 @@
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
@@ -2030,16 +2147,19 @@
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_SPKOUTL_PGA_ENA)
- return snd_soc_write(codec, WM8962_SPKOUTL_VOLUME,
- reg_cache[WM8962_SPKOUTL_VOLUME]);
+ ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+ if (ret & WM8962_SPKOUTL_PGA_ENA) {
+ snd_soc_write(codec, WM8962_SPKOUTL_VOLUME,
+ snd_soc_read(codec, WM8962_SPKOUTL_VOLUME));
+ return 1;
+ }
/* ...otherwise the right. The VU is stereo. */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_SPKOUTR_PGA_ENA)
- return snd_soc_write(codec, WM8962_SPKOUTR_VOLUME,
- reg_cache[WM8962_SPKOUTR_VOLUME]);
+ if (ret & WM8962_SPKOUTR_PGA_ENA)
+ snd_soc_write(codec, WM8962_SPKOUTR_VOLUME,
+ snd_soc_read(codec, WM8962_SPKOUTR_VOLUME));
- return 0;
+ return 1;
}
static const char *cap_hpf_mode_text[] = {
@@ -2049,6 +2169,14 @@
static const struct soc_enum cap_hpf_mode =
SOC_ENUM_SINGLE(WM8962_ADC_DAC_CONTROL_2, 10, 2, cap_hpf_mode_text);
+
+static const char *cap_lhpf_mode_text[] = {
+ "LPF", "HPF"
+};
+
+static const struct soc_enum cap_lhpf_mode =
+ SOC_ENUM_SINGLE(WM8962_LHPF1, 1, 2, cap_lhpf_mode_text);
+
static const struct snd_kcontrol_new wm8962_snd_controls[] = {
SOC_DOUBLE("Input Mixer Switch", WM8962_INPUT_MIXER_CONTROL_1, 3, 2, 1, 1),
@@ -2077,6 +2205,8 @@
SOC_SINGLE("Capture HPF Switch", WM8962_ADC_DAC_CONTROL_1, 0, 1, 1),
SOC_ENUM("Capture HPF Mode", cap_hpf_mode),
SOC_SINGLE("Capture HPF Cutoff", WM8962_ADC_DAC_CONTROL_2, 7, 7, 0),
+SOC_SINGLE("Capture LHPF Switch", WM8962_LHPF1, 0, 1, 0),
+SOC_ENUM("Capture LHPF Mode", cap_lhpf_mode),
SOC_DOUBLE_R_TLV("Sidetone Volume", WM8962_DAC_DSP_MIXING_1,
WM8962_DAC_DSP_MIXING_2, 4, 12, 0, st_tlv),
@@ -2134,6 +2264,11 @@
WM8962_EQL_B4_GAIN_SHIFT, 31, 0, eq_tlv),
SOC_DOUBLE_R_TLV("EQ5 Volume", WM8962_EQ3, WM8962_EQ23,
WM8962_EQL_B5_GAIN_SHIFT, 31, 0, eq_tlv),
+
+WM8962_DSP2_ENABLE("VSS Switch", WM8962_VSS_ENA_SHIFT),
+WM8962_DSP2_ENABLE("HPF1 Switch", WM8962_HPF1_ENA_SHIFT),
+WM8962_DSP2_ENABLE("HPF2 Switch", WM8962_HPF2_ENA_SHIFT),
+WM8962_DSP2_ENABLE("HD Bass Switch", WM8962_HDBASS_ENA_SHIFT),
};
static const struct snd_kcontrol_new wm8962_spk_mono_controls[] = {
@@ -2365,7 +2500,6 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- u16 *reg_cache = codec->reg_cache;
int reg;
switch (w->shift) {
@@ -2388,13 +2522,38 @@
switch (event) {
case SND_SOC_DAPM_POST_PMU:
- return snd_soc_write(codec, reg, reg_cache[reg]);
+ return snd_soc_write(codec, reg, snd_soc_read(codec, reg));
default:
BUG();
return -EINVAL;
}
}
+static int dsp2_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ if (wm8962->dsp2_ena)
+ wm8962_dsp2_start(codec);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ if (wm8962->dsp2_ena)
+ wm8962_dsp2_stop(codec);
+ break;
+
+ default:
+ BUG();
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const char *st_text[] = { "None", "Right", "Left" };
static const struct soc_enum str_enum =
@@ -2509,7 +2668,7 @@
SND_SOC_DAPM_INPUT("Beep"),
SND_SOC_DAPM_INPUT("DMICDAT"),
-SND_SOC_DAPM_MICBIAS("MICBIAS", WM8962_PWR_MGMT_1, 1, 0),
+SND_SOC_DAPM_SUPPLY("MICBIAS", WM8962_PWR_MGMT_1, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Class G", WM8962_CHARGE_PUMP_B, 0, 1, NULL, 0),
SND_SOC_DAPM_SUPPLY("SYSCLK", WM8962_CLOCKING2, 5, 0, sysclk_event,
@@ -2517,6 +2676,9 @@
SND_SOC_DAPM_SUPPLY("Charge Pump", WM8962_CHARGE_PUMP_1, 0, 0, cp_event,
SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT,
+ WM8962_DSP2_ENA_SHIFT, 0, dsp2_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0,
inpgal, ARRAY_SIZE(inpgal)),
@@ -2527,7 +2689,7 @@
SND_SOC_DAPM_MIXER("MIXINR", WM8962_PWR_MGMT_1, 4, 0,
mixinr, ARRAY_SIZE(mixinr)),
-SND_SOC_DAPM_AIF_IN("DMIC", NULL, 0, WM8962_PWR_MGMT_1, 10, 0),
+SND_SOC_DAPM_AIF_IN("DMIC_ENA", NULL, 0, WM8962_PWR_MGMT_1, 10, 0),
SND_SOC_DAPM_ADC("ADCL", "Capture", WM8962_PWR_MGMT_1, 3, 0),
SND_SOC_DAPM_ADC("ADCR", "Capture", WM8962_PWR_MGMT_1, 2, 0),
@@ -2606,17 +2768,19 @@
{ "MICBIAS", NULL, "SYSCLK" },
- { "DMIC", NULL, "DMICDAT" },
+ { "DMIC_ENA", NULL, "DMICDAT" },
{ "ADCL", NULL, "SYSCLK" },
{ "ADCL", NULL, "TOCLK" },
{ "ADCL", NULL, "MIXINL" },
- { "ADCL", NULL, "DMIC" },
+ { "ADCL", NULL, "DMIC_ENA" },
+ { "ADCL", NULL, "DSP2" },
{ "ADCR", NULL, "SYSCLK" },
{ "ADCR", NULL, "TOCLK" },
{ "ADCR", NULL, "MIXINR" },
- { "ADCR", NULL, "DMIC" },
+ { "ADCR", NULL, "DMIC_ENA" },
+ { "ADCR", NULL, "DSP2" },
{ "STL", "Left", "ADCL" },
{ "STL", "Right", "ADCR" },
@@ -2628,11 +2792,13 @@
{ "DACL", NULL, "TOCLK" },
{ "DACL", NULL, "Beep" },
{ "DACL", NULL, "STL" },
+ { "DACL", NULL, "DSP2" },
{ "DACR", NULL, "SYSCLK" },
{ "DACR", NULL, "TOCLK" },
{ "DACR", NULL, "Beep" },
{ "DACR", NULL, "STR" },
+ { "DACR", NULL, "DSP2" },
{ "HPMIXL", "IN4L Switch", "IN4L" },
{ "HPMIXL", "IN4R Switch", "IN4R" },
@@ -3058,9 +3224,9 @@
int aif0 = 0;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_DSP_A:
- aif0 |= WM8962_LRCLK_INV;
case SND_SOC_DAIFMT_DSP_B:
+ aif0 |= WM8962_LRCLK_INV | 3;
+ case SND_SOC_DAIFMT_DSP_A:
aif0 |= 3;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
@@ -3403,12 +3569,16 @@
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int mask;
int active;
+ int reg;
mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2_MASK);
active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
active &= ~mask;
+ if (!active)
+ return IRQ_NONE;
+
/* Acknowledge the interrupts */
snd_soc_write(codec, WM8962_INTERRUPT_STATUS_2, active);
@@ -3420,9 +3590,21 @@
if (active & WM8962_FIFOS_ERR_EINT)
dev_err(codec->dev, "FIFO error\n");
- if (active & WM8962_TEMP_SHUT_EINT)
+ if (active & WM8962_TEMP_SHUT_EINT) {
dev_crit(codec->dev, "Thermal shutdown\n");
+ reg = snd_soc_read(codec, WM8962_THERMAL_SHUTDOWN_STATUS);
+
+ if (reg & WM8962_TEMP_ERR_HP)
+ dev_crit(codec->dev, "Headphone thermal error\n");
+ if (reg & WM8962_TEMP_WARN_HP)
+ dev_crit(codec->dev, "Headphone thermal warning\n");
+ if (reg & WM8962_TEMP_ERR_SPK)
+ dev_crit(codec->dev, "Speaker thermal error\n");
+ if (reg & WM8962_TEMP_WARN_SPK)
+ dev_crit(codec->dev, "Speaker thermal warning\n");
+ }
+
if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) {
dev_dbg(codec->dev, "Microphone event detected\n");
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 572bb80..b444b29 100644
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -546,6 +546,9 @@
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
+ snd_soc_cache_sync(codec);
+
/* mute dac and set vmid to 500k, enable VREF */
snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
break;
@@ -605,20 +608,8 @@
static int wm8971_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
u16 reg;
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8971_reg); i++) {
- if (i + 1 == WM8971_RESET)
- continue;
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
-
wm8971_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* charge wm8971 caps */
@@ -660,25 +651,14 @@
msecs_to_jiffies(1000));
/* set the update bits */
- reg = snd_soc_read(codec, WM8971_LDAC);
- snd_soc_write(codec, WM8971_LDAC, reg | 0x0100);
- reg = snd_soc_read(codec, WM8971_RDAC);
- snd_soc_write(codec, WM8971_RDAC, reg | 0x0100);
-
- reg = snd_soc_read(codec, WM8971_LOUT1V);
- snd_soc_write(codec, WM8971_LOUT1V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8971_ROUT1V);
- snd_soc_write(codec, WM8971_ROUT1V, reg | 0x0100);
-
- reg = snd_soc_read(codec, WM8971_LOUT2V);
- snd_soc_write(codec, WM8971_LOUT2V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8971_ROUT2V);
- snd_soc_write(codec, WM8971_ROUT2V, reg | 0x0100);
-
- reg = snd_soc_read(codec, WM8971_LINVOL);
- snd_soc_write(codec, WM8971_LINVOL, reg | 0x0100);
- reg = snd_soc_read(codec, WM8971_RINVOL);
- snd_soc_write(codec, WM8971_RINVOL, reg | 0x0100);
+ snd_soc_update_bits(codec, WM8971_LDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8971_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8971_LOUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8971_ROUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8971_LOUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8971_ROUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8971_LINVOL, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8971_RINVOL, 0x0100, 0x0100);
snd_soc_add_controls(codec, wm8971_snd_controls,
ARRAY_SIZE(wm8971_snd_controls));
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index ca646a8..9352f1e0 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -3,7 +3,7 @@
*
* Copyright 2006-2009 Wolfson Microelectronics PLC.
*
- * Author: Liam Girdwood <linux@wolfsonmicro.com>
+ * Author: Liam Girdwood <Liam.Girdwood@wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -530,6 +530,8 @@
power1 |= WM8974_POWER1_BIASEN | WM8974_POWER1_BUFIOEN;
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ snd_soc_cache_sync(codec);
+
/* Initial cap charge at VMID 5k */
snd_soc_write(codec, WM8974_POWER1, power1 | 0x3);
mdelay(100);
@@ -589,18 +591,7 @@
static int wm8974_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8974_reg); i++) {
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index 85e3e63..41ca4d9 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -52,7 +52,6 @@
/* codec private data */
struct wm8978_priv {
enum snd_soc_control_type control_type;
- void *control_data;
unsigned int f_pllout;
unsigned int f_mclk;
unsigned int f_256fs;
@@ -955,7 +954,6 @@
* default hardware setting
*/
wm8978->sysclk = WM8978_PLL;
- codec->control_data = wm8978->control_data;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_I2C);
if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
@@ -1016,7 +1014,6 @@
return -ENOMEM;
i2c_set_clientdata(i2c, wm8978);
- wm8978->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8978, &wm8978_dai, 1);
diff --git a/sound/soc/codecs/wm8983.c b/sound/soc/codecs/wm8983.c
index 17f04ec..93ee284 100644
--- a/sound/soc/codecs/wm8983.c
+++ b/sound/soc/codecs/wm8983.c
@@ -1007,7 +1007,7 @@
return ret;
}
- ret = snd_soc_write(codec, WM8983_SOFTWARE_RESET, 0x8983);
+ ret = snd_soc_write(codec, WM8983_SOFTWARE_RESET, 0);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
return ret;
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index d7170f1..2e9eba7 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -55,7 +55,6 @@
struct snd_pcm_hw_constraint_list *sysclk_constraints;
};
-
#define wm8988_reset(c) snd_soc_write(c, WM8988_RESET, 0)
/*
@@ -676,6 +675,8 @@
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ snd_soc_cache_sync(codec);
+
/* VREF, VMID=2x5k */
snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
@@ -736,21 +737,7 @@
static int wm8988_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < WM8988_NUM_REG; i++) {
- if (i == WM8988_RESET)
- continue;
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
-
wm8988_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
@@ -759,7 +746,6 @@
struct wm8988_priv *wm8988 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_dapm_context *dapm = &codec->dapm;
int ret = 0;
- u16 reg;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8988->control_type);
if (ret < 0) {
@@ -774,16 +760,11 @@
}
/* set the update bits (we always update left then right) */
- reg = snd_soc_read(codec, WM8988_RADC);
- snd_soc_write(codec, WM8988_RADC, reg | 0x100);
- reg = snd_soc_read(codec, WM8988_RDAC);
- snd_soc_write(codec, WM8988_RDAC, reg | 0x0100);
- reg = snd_soc_read(codec, WM8988_ROUT1V);
- snd_soc_write(codec, WM8988_ROUT1V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8988_ROUT2V);
- snd_soc_write(codec, WM8988_ROUT2V, reg | 0x0100);
- reg = snd_soc_read(codec, WM8988_RINVOL);
- snd_soc_write(codec, WM8988_RINVOL, reg | 0x0100);
+ snd_soc_update_bits(codec, WM8988_RADC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8988_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8988_ROUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8988_ROUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8988_RINVOL, 0x0100, 0x0100);
wm8988_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 100aeee..d29a962 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -36,10 +36,17 @@
unsigned int pcmclk;
};
-/*
- * wm8990 register cache. Note that register 0 is not included in the
- * cache.
- */
+static int wm8990_volatile_register(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ switch (reg) {
+ case WM8990_RESET:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static const u16 wm8990_reg[] = {
0x8990, /* R0 - Reset */
0x0000, /* R1 - Power Management (1) */
@@ -394,7 +401,7 @@
(1 << WM8990_AINRMUX_PWR_BIT))) {
reg |= WM8990_AINR_ENA;
} else {
- reg &= ~WM8990_AINL_ENA;
+ reg &= ~WM8990_AINR_ENA;
}
snd_soc_write(w->codec, WM8990_POWER_MANAGEMENT_2, reg);
@@ -974,7 +981,6 @@
static int wm8990_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
int source, unsigned int freq_in, unsigned int freq_out)
{
- u16 reg;
struct snd_soc_codec *codec = codec_dai->codec;
struct _pll_div pll_div;
@@ -982,13 +988,12 @@
pll_factors(&pll_div, freq_out * 4, freq_in);
/* Turn on PLL */
- reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
- reg |= WM8990_PLL_ENA;
- snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
+ snd_soc_update_bits(codec, WM8990_POWER_MANAGEMENT_2,
+ WM8990_PLL_ENA, WM8990_PLL_ENA);
/* sysclk comes from PLL */
- reg = snd_soc_read(codec, WM8990_CLOCKING_2);
- snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
+ snd_soc_update_bits(codec, WM8990_CLOCKING_2,
+ WM8990_SYSCLK_SRC, WM8990_SYSCLK_SRC);
/* set up N , fractional mode and pre-divisor if necessary */
snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
@@ -996,10 +1001,9 @@
snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
snd_soc_write(codec, WM8990_PLL3, (u8)(pll_div.k & 0xFF));
} else {
- /* Turn on PLL */
- reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
- reg &= ~WM8990_PLL_ENA;
- snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
+ /* Turn off PLL */
+ snd_soc_update_bits(codec, WM8990_POWER_MANAGEMENT_2,
+ WM8990_PLL_ENA, 0);
}
return 0;
}
@@ -1077,28 +1081,23 @@
int div_id, int div)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 reg;
switch (div_id) {
case WM8990_MCLK_DIV:
- reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
- ~WM8990_MCLK_DIV_MASK;
- snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_update_bits(codec, WM8990_CLOCKING_2,
+ WM8990_MCLK_DIV_MASK, div);
break;
case WM8990_DACCLK_DIV:
- reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
- ~WM8990_DAC_CLKDIV_MASK;
- snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_update_bits(codec, WM8990_CLOCKING_2,
+ WM8990_DAC_CLKDIV_MASK, div);
break;
case WM8990_ADCCLK_DIV:
- reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
- ~WM8990_ADC_CLKDIV_MASK;
- snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_update_bits(codec, WM8990_CLOCKING_2,
+ WM8990_ADC_CLKDIV_MASK, div);
break;
case WM8990_BCLK_DIV:
- reg = snd_soc_read(codec, WM8990_CLOCKING_1) &
- ~WM8990_BCLK_DIV_MASK;
- snd_soc_write(codec, WM8990_CLOCKING_1, reg | div);
+ snd_soc_update_bits(codec, WM8990_CLOCKING_1,
+ WM8990_BCLK_DIV_MASK, div);
break;
default:
return -EINVAL;
@@ -1156,7 +1155,7 @@
static int wm8990_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 val;
+ int ret;
switch (level) {
case SND_SOC_BIAS_ON:
@@ -1164,13 +1163,18 @@
case SND_SOC_BIAS_PREPARE:
/* VMID=2*50k */
- val = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_1) &
- ~WM8990_VMID_MODE_MASK;
- snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x2);
+ snd_soc_update_bits(codec, WM8990_POWER_MANAGEMENT_1,
+ WM8990_VMID_MODE_MASK, 0x2);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ ret = snd_soc_cache_sync(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
+ return ret;
+ }
+
/* Enable all output discharge bits */
snd_soc_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
WM8990_DIS_RLINE | WM8990_DIS_OUT3 |
@@ -1225,9 +1229,8 @@
}
/* VMID=2*250k */
- val = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_1) &
- ~WM8990_VMID_MODE_MASK;
- snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x4);
+ snd_soc_update_bits(codec, WM8990_POWER_MANAGEMENT_1,
+ WM8990_VMID_MODE_MASK, 0x4);
break;
case SND_SOC_BIAS_OFF:
@@ -1241,8 +1244,8 @@
WM8990_BUFIOEN);
/* mute DAC */
- val = snd_soc_read(codec, WM8990_DAC_CTRL);
- snd_soc_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
+ snd_soc_update_bits(codec, WM8990_DAC_CTRL,
+ WM8990_DAC_MUTE, WM8990_DAC_MUTE);
/* Enable any disabled outputs */
snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
@@ -1319,19 +1322,6 @@
static int wm8990_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8990_reg); i++) {
- if (i + 1 == WM8990_RESET)
- continue;
- data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
-
wm8990_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
}
@@ -1343,7 +1333,6 @@
static int wm8990_probe(struct snd_soc_codec *codec)
{
int ret;
- u16 reg;
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
if (ret < 0) {
@@ -1356,15 +1345,14 @@
/* charge output caps */
wm8990_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- reg = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_4);
- snd_soc_write(codec, WM8990_AUDIO_INTERFACE_4, reg | WM8990_ALRCGPIO1);
+ snd_soc_update_bits(codec, WM8990_AUDIO_INTERFACE_4,
+ WM8990_ALRCGPIO1, WM8990_ALRCGPIO1);
- reg = snd_soc_read(codec, WM8990_GPIO1_GPIO2) &
- ~WM8990_GPIO1_SEL_MASK;
- snd_soc_write(codec, WM8990_GPIO1_GPIO2, reg | 1);
+ snd_soc_update_bits(codec, WM8990_GPIO1_GPIO2,
+ WM8990_GPIO1_SEL_MASK, 1);
- reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
- snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg | WM8990_OPCLK_ENA);
+ snd_soc_update_bits(codec, WM8990_POWER_MANAGEMENT_2,
+ WM8990_OPCLK_ENA, WM8990_OPCLK_ENA);
snd_soc_write(codec, WM8990_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
snd_soc_write(codec, WM8990_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8));
@@ -1392,6 +1380,7 @@
.reg_cache_size = ARRAY_SIZE(wm8990_reg),
.reg_word_size = sizeof(u16),
.reg_cache_default = wm8990_reg,
+ .volatile_register = wm8990_volatile_register,
};
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c
index 6af23d0..c9ab3ba 100644
--- a/sound/soc/codecs/wm8991.c
+++ b/sound/soc/codecs/wm8991.c
@@ -3,7 +3,7 @@
*
* Copyright 2007-2010 Wolfson Microelectronics PLC.
* Author: Graeme Gregory
- * linux@wolfsonmicro.com
+ * Graeme.Gregory@wolfsonmicro.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -393,7 +393,7 @@
(1 << WM8991_AINRMUX_PWR_BIT)))
reg |= WM8991_AINR_ENA;
else
- reg &= ~WM8991_AINL_ENA;
+ reg &= ~WM8991_AINR_ENA;
snd_soc_write(w->codec, WM8991_POWER_MANAGEMENT_2, reg);
return 0;
@@ -1264,7 +1264,6 @@
{
struct wm8991_priv *wm8991;
int ret;
- unsigned int reg;
wm8991 = snd_soc_codec_get_drvdata(codec);
@@ -1282,19 +1281,18 @@
wm8991_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- reg = snd_soc_read(codec, WM8991_AUDIO_INTERFACE_4);
- snd_soc_write(codec, WM8991_AUDIO_INTERFACE_4, reg | WM8991_ALRCGPIO1);
+ snd_soc_update_bits(codec, WM8991_AUDIO_INTERFACE_4,
+ WM8991_ALRCGPIO1, WM8991_ALRCGPIO1);
- reg = snd_soc_read(codec, WM8991_GPIO1_GPIO2) &
- ~WM8991_GPIO1_SEL_MASK;
- snd_soc_write(codec, WM8991_GPIO1_GPIO2, reg | 1);
+ snd_soc_update_bits(codec, WM8991_GPIO1_GPIO2,
+ WM8991_GPIO1_SEL_MASK, 1);
- reg = snd_soc_read(codec, WM8991_POWER_MANAGEMENT_1);
- snd_soc_write(codec, WM8991_POWER_MANAGEMENT_1, reg | WM8991_VREF_ENA|
- WM8991_VMID_MODE_MASK);
+ snd_soc_update_bits(codec, WM8991_POWER_MANAGEMENT_1,
+ WM8991_VREF_ENA | WM8991_VMID_MODE_MASK,
+ WM8991_VREF_ENA | WM8991_VMID_MODE_MASK);
- reg = snd_soc_read(codec, WM8991_POWER_MANAGEMENT_2);
- snd_soc_write(codec, WM8991_POWER_MANAGEMENT_2, reg | WM8991_OPCLK_ENA);
+ snd_soc_update_bits(codec, WM8991_POWER_MANAGEMENT_2,
+ WM8991_OPCLK_ENA, WM8991_OPCLK_ENA);
snd_soc_write(codec, WM8991_DAC_CTRL, 0);
snd_soc_write(codec, WM8991_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index 6e85b88..eec8e14 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -847,6 +847,7 @@
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
@@ -880,6 +881,9 @@
};
static const struct snd_soc_dapm_route routes[] = {
+ { "MICBIAS1", NULL, "VMID" },
+ { "MICBIAS2", NULL, "VMID" },
+
{ "ADCL", NULL, "CLK_SYS" },
{ "ADCL", NULL, "CLK_DSP" },
{ "ADCR", NULL, "CLK_SYS" },
@@ -1433,7 +1437,8 @@
int ret, i, val;
wm8993->hubs_data.hp_startup_mode = 1;
- wm8993->hubs_data.dcs_codes = -2;
+ wm8993->hubs_data.dcs_codes_l = -2;
+ wm8993->hubs_data.dcs_codes_r = -2;
wm8993->hubs_data.series_startup = 1;
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
diff --git a/sound/soc/codecs/wm8994-tables.c b/sound/soc/codecs/wm8994-tables.c
index a87adbd..df5a8b9 100644
--- a/sound/soc/codecs/wm8994-tables.c
+++ b/sound/soc/codecs/wm8994-tables.c
@@ -1073,8 +1073,8 @@
{ 0x0000, 0x0000 }, /* R1069 */
{ 0x0000, 0x0000 }, /* R1070 */
{ 0x0000, 0x0000 }, /* R1071 */
- { 0x0000, 0x0000 }, /* R1072 */
- { 0x0000, 0x0000 }, /* R1073 */
+ { 0x006F, 0x006F }, /* R1072 - AIF1 DAC1 Noise Gate */
+ { 0x006F, 0x006F }, /* R1073 - AIF1 DAC2 Noise Gate */
{ 0x0000, 0x0000 }, /* R1074 */
{ 0x0000, 0x0000 }, /* R1075 */
{ 0x0000, 0x0000 }, /* R1076 */
@@ -1329,7 +1329,7 @@
{ 0x0000, 0x0000 }, /* R1325 */
{ 0x0000, 0x0000 }, /* R1326 */
{ 0x0000, 0x0000 }, /* R1327 */
- { 0x0000, 0x0000 }, /* R1328 */
+ { 0x006F, 0x006F }, /* R1328 - AIF2 DAC Noise Gate */
{ 0x0000, 0x0000 }, /* R1329 */
{ 0x0000, 0x0000 }, /* R1330 */
{ 0x0000, 0x0000 }, /* R1331 */
@@ -1635,8 +1635,8 @@
0x0000, /* R58 - MICBIAS */
0x000D, /* R59 - LDO 1 */
0x0003, /* R60 - LDO 2 */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
+ 0x0039, /* R61 - MICBIAS1 */
+ 0x0039, /* R62 - MICBIAS2 */
0x0000, /* R63 */
0x0000, /* R64 */
0x0000, /* R65 */
@@ -2646,8 +2646,8 @@
0x0000, /* R1069 */
0x0000, /* R1070 */
0x0000, /* R1071 */
- 0x0000, /* R1072 */
- 0x0000, /* R1073 */
+ 0x0068, /* R1072 - AIF1 DAC1 Noise Gate */
+ 0x0068, /* R1073 - AIF1 DAC2 Noise Gate */
0x0000, /* R1074 */
0x0000, /* R1075 */
0x0000, /* R1076 */
@@ -2902,7 +2902,7 @@
0x0000, /* R1325 */
0x0000, /* R1326 */
0x0000, /* R1327 */
- 0x0000, /* R1328 */
+ 0x0068, /* R1328 - AIF2 DAC Noise Gate */
0x0000, /* R1329 */
0x0000, /* R1330 */
0x0000, /* R1331 */
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index b393f9f..6b73efd 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -107,6 +107,7 @@
case WM8994_LDO_2:
case WM8958_DSP2_EXECCONTROL:
case WM8958_MIC_DETECT_3:
+ case WM8994_DC_SERVO_4E:
return 1;
default:
return 0;
@@ -207,7 +208,7 @@
static int configure_clock(struct snd_soc_codec *codec)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- int old, new;
+ int change, new;
/* Bring up the AIF clocks first */
configure_aif_clock(codec, 0);
@@ -228,14 +229,11 @@
else
new = 0;
- old = snd_soc_read(codec, WM8994_CLOCKING_1) & WM8994_SYSCLK_SRC;
-
- /* If there's no change then we're done. */
- if (old == new)
+ change = snd_soc_update_bits(codec, WM8994_CLOCKING_1,
+ WM8994_SYSCLK_SRC, new);
+ if (!change)
return 0;
- snd_soc_update_bits(codec, WM8994_CLOCKING_1, WM8994_SYSCLK_SRC, new);
-
snd_soc_dapm_sync(&codec->dapm);
return 0;
@@ -281,6 +279,8 @@
static const DECLARE_TLV_DB_SCALE(st_tlv, -3600, 300, 0);
static const DECLARE_TLV_DB_SCALE(wm8994_3d_tlv, -1600, 183, 0);
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(ng_tlv, -10200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(mixin_boost_tlv, 0, 900, 0);
#define WM8994_DRC_SWITCH(xname, reg, shift) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -660,8 +660,52 @@
eq_tlv),
};
+static const char *wm8958_ng_text[] = {
+ "30ms", "125ms", "250ms", "500ms",
+};
+
+static const struct soc_enum wm8958_aif1dac1_ng_hold =
+ SOC_ENUM_SINGLE(WM8958_AIF1_DAC1_NOISE_GATE,
+ WM8958_AIF1DAC1_NG_THR_SHIFT, 4, wm8958_ng_text);
+
+static const struct soc_enum wm8958_aif1dac2_ng_hold =
+ SOC_ENUM_SINGLE(WM8958_AIF1_DAC2_NOISE_GATE,
+ WM8958_AIF1DAC2_NG_THR_SHIFT, 4, wm8958_ng_text);
+
+static const struct soc_enum wm8958_aif2dac_ng_hold =
+ SOC_ENUM_SINGLE(WM8958_AIF2_DAC_NOISE_GATE,
+ WM8958_AIF2DAC_NG_THR_SHIFT, 4, wm8958_ng_text);
+
static const struct snd_kcontrol_new wm8958_snd_controls[] = {
SOC_SINGLE_TLV("AIF3 Boost Volume", WM8958_AIF3_CONTROL_2, 10, 3, 0, aif_tlv),
+
+SOC_SINGLE("AIF1DAC1 Noise Gate Switch", WM8958_AIF1_DAC1_NOISE_GATE,
+ WM8958_AIF1DAC1_NG_ENA_SHIFT, 1, 0),
+SOC_ENUM("AIF1DAC1 Noise Gate Hold Time", wm8958_aif1dac1_ng_hold),
+SOC_SINGLE_TLV("AIF1DAC1 Noise Gate Threshold Volume",
+ WM8958_AIF1_DAC1_NOISE_GATE, WM8958_AIF1DAC1_NG_THR_SHIFT,
+ 7, 1, ng_tlv),
+
+SOC_SINGLE("AIF1DAC2 Noise Gate Switch", WM8958_AIF1_DAC2_NOISE_GATE,
+ WM8958_AIF1DAC2_NG_ENA_SHIFT, 1, 0),
+SOC_ENUM("AIF1DAC2 Noise Gate Hold Time", wm8958_aif1dac2_ng_hold),
+SOC_SINGLE_TLV("AIF1DAC2 Noise Gate Threshold Volume",
+ WM8958_AIF1_DAC2_NOISE_GATE, WM8958_AIF1DAC2_NG_THR_SHIFT,
+ 7, 1, ng_tlv),
+
+SOC_SINGLE("AIF2DAC Noise Gate Switch", WM8958_AIF2_DAC_NOISE_GATE,
+ WM8958_AIF2DAC_NG_ENA_SHIFT, 1, 0),
+SOC_ENUM("AIF2DAC Noise Gate Hold Time", wm8958_aif2dac_ng_hold),
+SOC_SINGLE_TLV("AIF2DAC Noise Gate Threshold Volume",
+ WM8958_AIF2_DAC_NOISE_GATE, WM8958_AIF2DAC_NG_THR_SHIFT,
+ 7, 1, ng_tlv),
+};
+
+static const struct snd_kcontrol_new wm1811_snd_controls[] = {
+SOC_SINGLE_TLV("MIXINL IN1LP Boost Volume", WM8994_INPUT_MIXER_1, 7, 1, 0,
+ mixin_boost_tlv),
+SOC_SINGLE_TLV("MIXINL IN1RP Boost Volume", WM8994_INPUT_MIXER_1, 8, 1, 0,
+ mixin_boost_tlv),
};
static int clk_sys_event(struct snd_soc_dapm_widget *w,
@@ -681,6 +725,97 @@
return 0;
}
+static void vmid_reference(struct snd_soc_codec *codec)
+{
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+ wm8994->vmid_refcount++;
+
+ dev_dbg(codec->dev, "Referencing VMID, refcount is now %d\n",
+ wm8994->vmid_refcount);
+
+ if (wm8994->vmid_refcount == 1) {
+ /* Startup bias, VMID ramp & buffer */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK,
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ (0x11 << WM8994_VMID_RAMP_SHIFT));
+
+ /* Main bias enable, VMID=2x40k */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_BIAS_ENA |
+ WM8994_VMID_SEL_MASK,
+ WM8994_BIAS_ENA | 0x2);
+
+ msleep(20);
+ }
+}
+
+static void vmid_dereference(struct snd_soc_codec *codec)
+{
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+ wm8994->vmid_refcount--;
+
+ dev_dbg(codec->dev, "Dereferencing VMID, refcount is now %d\n",
+ wm8994->vmid_refcount);
+
+ if (wm8994->vmid_refcount == 0) {
+ /* Switch over to startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ (1 << WM8994_VMID_RAMP_SHIFT));
+
+ /* Disable main biases */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_BIAS_ENA |
+ WM8994_VMID_SEL_MASK, 0);
+
+ /* Discharge line */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH);
+
+ msleep(5);
+
+ /* Switch off startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK, 0);
+ }
+}
+
+static int vmid_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ vmid_reference(codec);
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ vmid_dereference(codec);
+ break;
+ }
+
+ return 0;
+}
+
static void wm8994_update_class_w(struct snd_soc_codec *codec)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
@@ -1208,6 +1343,8 @@
SND_SOC_DAPM_SUPPLY_S("MICBIAS Supply", 1, SND_SOC_NOPM, 0, 0, micbias_ev,
SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, vmid_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("CLK_SYS", SND_SOC_NOPM, 0, 0, clk_sys_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
@@ -1282,7 +1419,7 @@
SND_SOC_DAPM_MUX("AIF2ADC Mux", SND_SOC_NOPM, 0, 0, &aif2adc_mux),
SND_SOC_DAPM_AIF_IN("AIF3DACDAT", "AIF3 Playback", 0, SND_SOC_NOPM, 0, 0),
-SND_SOC_DAPM_AIF_IN("AIF3ADCDAT", "AIF3 Capture", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_OUT("AIF3ADCDAT", "AIF3 Capture", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_SUPPLY("TOCLK", WM8994_CLOCKING_1, 4, 0, NULL, 0),
@@ -1525,6 +1662,8 @@
static const struct snd_soc_dapm_route wm8994_intercon[] = {
{ "AIF2DACL", NULL, "AIF2DAC Mux" },
{ "AIF2DACR", NULL, "AIF2DAC Mux" },
+ { "MICBIAS1", NULL, "VMID" },
+ { "MICBIAS2", NULL, "VMID" },
};
static const struct snd_soc_dapm_route wm8958_intercon[] = {
@@ -1629,10 +1768,12 @@
unsigned int freq_in, unsigned int freq_out)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+ struct wm8994 *control = codec->control_data;
int reg_offset, ret;
struct fll_div fll;
u16 reg, aif1, aif2;
unsigned long timeout;
+ bool was_enabled;
aif1 = snd_soc_read(codec, WM8994_AIF1_CLOCKING_1)
& WM8994_AIF1CLK_ENA;
@@ -1653,6 +1794,9 @@
return -EINVAL;
}
+ reg = snd_soc_read(codec, WM8994_FLL1_CONTROL_1 + reg_offset);
+ was_enabled = reg & WM8994_FLL1_ENA;
+
switch (src) {
case 0:
/* Allow no source specification when stopping */
@@ -1719,6 +1863,21 @@
/* Enable (with fractional mode if required) */
if (freq_out) {
+ /* Enable VMID if we need it */
+ if (!was_enabled) {
+ switch (control->type) {
+ case WM8994:
+ vmid_reference(codec);
+ break;
+ case WM8958:
+ if (wm8994->revision < 1)
+ vmid_reference(codec);
+ break;
+ default:
+ break;
+ }
+ }
+
if (fll.k)
reg = WM8994_FLL1_ENA | WM8994_FLL1_FRAC;
else
@@ -1736,6 +1895,20 @@
} else {
msleep(5);
}
+ } else {
+ if (was_enabled) {
+ switch (control->type) {
+ case WM8994:
+ vmid_dereference(codec);
+ break;
+ case WM8958:
+ if (wm8994->revision < 1)
+ vmid_dereference(codec);
+ break;
+ default:
+ break;
+ }
+ }
}
wm8994->fll[id].in = freq_in;
@@ -1852,9 +2025,6 @@
break;
case SND_SOC_BIAS_PREPARE:
- /* VMID=2x40k */
- snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
- WM8994_VMID_SEL_MASK, 0x2);
break;
case SND_SOC_BIAS_STANDBY:
@@ -1888,6 +2058,15 @@
WM8958_CP_DISCH);
}
break;
+
+ case WM1811:
+ if (wm8994->revision < 2) {
+ snd_soc_write(codec, 0x102, 0x3);
+ snd_soc_write(codec, 0x5d, 0x7e);
+ snd_soc_write(codec, 0x5e, 0x0);
+ snd_soc_write(codec, 0x102, 0x0);
+ }
+ break;
}
/* Discharge LINEOUT1 & 2 */
@@ -1896,65 +2075,13 @@
WM8994_LINEOUT2_DISCH,
WM8994_LINEOUT1_DISCH |
WM8994_LINEOUT2_DISCH);
-
- /* Startup bias, VMID ramp & buffer */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
- WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- WM8994_VMID_RAMP_MASK,
- WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- (0x11 << WM8994_VMID_RAMP_SHIFT));
-
- /* Main bias enable, VMID=2x40k */
- snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
- WM8994_BIAS_ENA |
- WM8994_VMID_SEL_MASK,
- WM8994_BIAS_ENA | 0x2);
-
- msleep(20);
}
- /* VMID=2x500k */
- snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
- WM8994_VMID_SEL_MASK, 0x4);
break;
case SND_SOC_BIAS_OFF:
if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
- /* Switch over to startup biases */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
- WM8994_BIAS_SRC |
- WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- WM8994_VMID_RAMP_MASK,
- WM8994_BIAS_SRC |
- WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- (1 << WM8994_VMID_RAMP_SHIFT));
-
- /* Disable main biases */
- snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
- WM8994_BIAS_ENA |
- WM8994_VMID_SEL_MASK, 0);
-
- /* Discharge line */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
- WM8994_LINEOUT1_DISCH |
- WM8994_LINEOUT2_DISCH,
- WM8994_LINEOUT1_DISCH |
- WM8994_LINEOUT2_DISCH);
-
- msleep(5);
-
- /* Switch off startup biases */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
- WM8994_BIAS_SRC |
- WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- WM8994_VMID_RAMP_MASK, 0);
-
wm8994->cur_fw = NULL;
pm_runtime_put(codec->dev);
@@ -2055,10 +2182,18 @@
/* The AIF2 format configuration needs to be mirrored to AIF3
* on WM8958 if it's in use so just do it all the time. */
- if (control->type == WM8958 && dai->id == 2)
- snd_soc_update_bits(codec, WM8958_AIF3_CONTROL_1,
- WM8994_AIF1_LRCLK_INV |
- WM8958_AIF3_FMT_MASK, aif1);
+ switch (control->type) {
+ case WM1811:
+ case WM8958:
+ if (dai->id == 2)
+ snd_soc_update_bits(codec, WM8958_AIF3_CONTROL_1,
+ WM8994_AIF1_LRCLK_INV |
+ WM8958_AIF3_FMT_MASK, aif1);
+ break;
+
+ default:
+ break;
+ }
snd_soc_update_bits(codec, aif1_reg,
WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV |
@@ -2100,7 +2235,6 @@
struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
- struct wm8994 *control = codec->control_data;
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
int aif1_reg;
int aif2_reg;
@@ -2143,14 +2277,6 @@
dev_dbg(codec->dev, "AIF2 using split LRCLK\n");
}
break;
- case 3:
- switch (control->type) {
- case WM8958:
- aif1_reg = WM8958_AIF3_CONTROL_1;
- break;
- default:
- return 0;
- }
default:
return -EINVAL;
}
@@ -2271,6 +2397,7 @@
switch (dai->id) {
case 3:
switch (control->type) {
+ case WM1811:
case WM8958:
aif1_reg = WM8958_AIF3_CONTROL_1;
break;
@@ -2311,7 +2438,7 @@
rate_reg = WM8994_AIF1_RATE;
break;
case 2:
- rate_reg = WM8994_AIF1_RATE;
+ rate_reg = WM8994_AIF2_RATE;
break;
default:
break;
@@ -2384,6 +2511,21 @@
return snd_soc_update_bits(codec, reg, mask, val);
}
+static int wm8994_aif2_probe(struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+
+ /* Disable the pulls on the AIF if we're using it to save power. */
+ snd_soc_update_bits(codec, WM8994_GPIO_3,
+ WM8994_GPN_PU | WM8994_GPN_PD, 0);
+ snd_soc_update_bits(codec, WM8994_GPIO_4,
+ WM8994_GPN_PU | WM8994_GPN_PD, 0);
+ snd_soc_update_bits(codec, WM8994_GPIO_5,
+ WM8994_GPN_PU | WM8994_GPN_PD, 0);
+
+ return 0;
+}
+
#define WM8994_RATES SNDRV_PCM_RATE_8000_96000
#define WM8994_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
@@ -2451,6 +2593,7 @@
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
},
+ .probe = wm8994_aif2_probe,
.ops = &wm8994_aif2_dai_ops,
},
{
@@ -2485,6 +2628,7 @@
case WM8994:
snd_soc_update_bits(codec, WM8994_MICBIAS, WM8994_MICD_ENA, 0);
break;
+ case WM1811:
case WM8958:
snd_soc_update_bits(codec, WM8958_MIC_DETECT_1,
WM8958_MICD_ENA, 0);
@@ -2553,6 +2697,7 @@
snd_soc_update_bits(codec, WM8994_MICBIAS,
WM8994_MICD_ENA, WM8994_MICD_ENA);
break;
+ case WM1811:
case WM8958:
if (wm8994->jack_cb)
snd_soc_update_bits(codec, WM8958_MIC_DETECT_1,
@@ -2851,8 +2996,13 @@
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994 *control = codec->control_data;
- if (control->type != WM8958)
+ switch (control->type) {
+ case WM1811:
+ case WM8958:
+ break;
+ default:
return -EINVAL;
+ }
if (jack) {
if (!cb) {
@@ -2916,6 +3066,24 @@
return IRQ_HANDLED;
}
+static irqreturn_t wm8994_temp_warn(int irq, void *data)
+{
+ struct snd_soc_codec *codec = data;
+
+ dev_err(codec->dev, "Thermal warning\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm8994_temp_shut(int irq, void *data)
+{
+ struct snd_soc_codec *codec = data;
+
+ dev_crit(codec->dev, "Thermal shutdown\n");
+
+ return IRQ_HANDLED;
+}
+
static int wm8994_codec_probe(struct snd_soc_codec *codec)
{
struct wm8994 *control;
@@ -2972,13 +3140,14 @@
switch (wm8994->revision) {
case 2:
case 3:
- wm8994->hubs.dcs_codes = -5;
+ wm8994->hubs.dcs_codes_l = -5;
+ wm8994->hubs.dcs_codes_r = -5;
wm8994->hubs.hp_startup_mode = 1;
wm8994->hubs.dcs_readback_mode = 1;
wm8994->hubs.series_startup = 1;
break;
default:
- wm8994->hubs.dcs_readback_mode = 1;
+ wm8994->hubs.dcs_readback_mode = 2;
break;
}
break;
@@ -2987,12 +3156,34 @@
wm8994->hubs.dcs_readback_mode = 1;
break;
+ case WM1811:
+ wm8994->hubs.dcs_readback_mode = 2;
+ wm8994->hubs.no_series_update = 1;
+
+ switch (wm8994->revision) {
+ case 0:
+ case 1:
+ wm8994->hubs.dcs_codes_l = -9;
+ wm8994->hubs.dcs_codes_r = -5;
+ break;
+ default:
+ break;
+ }
+
+ snd_soc_update_bits(codec, WM8994_ANALOGUE_HP_1,
+ WM1811_HPOUT1_ATTN, WM1811_HPOUT1_ATTN);
+ break;
+
default:
break;
}
wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
wm8994_fifo_error, "FIFO error", codec);
+ wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+ wm8994_temp_warn, "Thermal warning", codec);
+ wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+ wm8994_temp_shut, "Thermal shutdown", codec);
ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
wm_hubs_dcs_done, "DC servo done",
@@ -3043,6 +3234,7 @@
break;
case WM8958:
+ case WM1811:
if (wm8994->micdet_irq) {
ret = request_threaded_irq(wm8994->micdet_irq, NULL,
wm8958_mic_irq,
@@ -3205,6 +3397,19 @@
ARRAY_SIZE(wm8994_dac_widgets));
}
break;
+
+ case WM1811:
+ snd_soc_add_controls(codec, wm8958_snd_controls,
+ ARRAY_SIZE(wm8958_snd_controls));
+ snd_soc_dapm_new_controls(dapm, wm8958_dapm_widgets,
+ ARRAY_SIZE(wm8958_dapm_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
+ ARRAY_SIZE(wm8994_lateclk_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_adc_widgets,
+ ARRAY_SIZE(wm8994_adc_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
+ ARRAY_SIZE(wm8994_dac_widgets));
+ break;
}
@@ -3241,6 +3446,12 @@
wm8958_dsp2_init(codec);
break;
+ case WM1811:
+ snd_soc_dapm_add_routes(dapm, wm8994_lateclk_intercon,
+ ARRAY_SIZE(wm8994_lateclk_intercon));
+ snd_soc_dapm_add_routes(dapm, wm8958_intercon,
+ ARRAY_SIZE(wm8958_intercon));
+ break;
}
return 0;
@@ -3257,6 +3468,8 @@
wm8994_free_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
&wm8994->hubs);
wm8994_free_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR, codec);
+ wm8994_free_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT, codec);
+ wm8994_free_irq(codec->control_data, WM8994_IRQ_TEMP_WARN, codec);
err:
kfree(wm8994);
return ret;
@@ -3279,6 +3492,8 @@
wm8994_free_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
&wm8994->hubs);
wm8994_free_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR, codec);
+ wm8994_free_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT, codec);
+ wm8994_free_irq(codec->control_data, WM8994_IRQ_TEMP_WARN, codec);
switch (control->type) {
case WM8994:
@@ -3292,6 +3507,7 @@
wm8994);
break;
+ case WM1811:
case WM8958:
if (wm8994->micdet_irq)
free_irq(wm8994->micdet_irq, wm8994);
diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h
index 1ab2266..f4f1355 100644
--- a/sound/soc/codecs/wm8994.h
+++ b/sound/soc/codecs/wm8994.h
@@ -83,6 +83,8 @@
struct completion fll_locked[2];
bool fll_locked_irq;
+ int vmid_refcount;
+
int dac_rates[2];
int lrclk_shared[2];
diff --git a/sound/soc/codecs/wm8995.c b/sound/soc/codecs/wm8995.c
index 5ad873f..78eeb21 100644
--- a/sound/soc/codecs/wm8995.c
+++ b/sound/soc/codecs/wm8995.c
@@ -485,7 +485,7 @@
static int configure_clock(struct snd_soc_codec *codec)
{
struct wm8995_priv *wm8995;
- int old, new;
+ int change, new;
wm8995 = snd_soc_codec_get_drvdata(codec);
@@ -509,15 +509,11 @@
else
new = 0;
- old = snd_soc_read(codec, WM8995_CLOCKING_1) & WM8995_SYSCLK_SRC;
-
- /* If there's no change then we're done. */
- if (old == new)
+ change = snd_soc_update_bits(codec, WM8995_CLOCKING_1,
+ WM8995_SYSCLK_SRC_MASK, new);
+ if (!change)
return 0;
- snd_soc_update_bits(codec, WM8995_CLOCKING_1,
- WM8995_SYSCLK_SRC_MASK, new);
-
snd_soc_dapm_sync(&codec->dapm);
return 0;
@@ -1573,11 +1569,16 @@
static int wm8995_remove(struct snd_soc_codec *codec)
{
struct wm8995_priv *wm8995;
- struct i2c_client *i2c;
+ int i;
- i2c = container_of(codec->dev, struct i2c_client, dev);
wm8995 = snd_soc_codec_get_drvdata(codec);
wm8995_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ for (i = 0; i < ARRAY_SIZE(wm8995->supplies); ++i)
+ regulator_unregister_notifier(wm8995->supplies[i].consumer,
+ &wm8995->disable_nb[i]);
+
+ regulator_bulk_free(ARRAY_SIZE(wm8995->supplies), wm8995->supplies);
return 0;
}
@@ -1642,6 +1643,7 @@
if (ret != 0x8995) {
dev_err(codec->dev, "Invalid device ID: %#x\n", ret);
+ ret = -EINVAL;
goto err_reg_enable;
}
diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c
index 0cdb9d1..645c980 100644
--- a/sound/soc/codecs/wm8996.c
+++ b/sound/soc/codecs/wm8996.c
@@ -41,12 +41,11 @@
#define HPOUT2L 4
#define HPOUT2R 8
-#define WM8996_NUM_SUPPLIES 4
+#define WM8996_NUM_SUPPLIES 3
static const char *wm8996_supply_names[WM8996_NUM_SUPPLIES] = {
"DBVDD",
"AVDD1",
"AVDD2",
- "CPVDD",
};
struct wm8996_priv {
@@ -71,6 +70,8 @@
struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES];
struct notifier_block disable_nb[WM8996_NUM_SUPPLIES];
+ struct regulator *cpvdd;
+ int bg_ena;
struct wm8996_pdata pdata;
@@ -112,7 +113,6 @@
WM8996_REGULATOR_EVENT(0)
WM8996_REGULATOR_EVENT(1)
WM8996_REGULATOR_EVENT(2)
-WM8996_REGULATOR_EVENT(3)
static const u16 wm8996_reg[WM8996_MAX_REGISTER] = {
[WM8996_SOFTWARE_RESET] = 0x8996,
@@ -414,6 +414,7 @@
static const DECLARE_TLV_DB_SCALE(out_tlv, -900, 75, 0);
static const DECLARE_TLV_DB_SCALE(spk_tlv, -900, 150, 0);
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(threedstereo_tlv, -1600, 183, 1);
static const char *sidetone_hpf_text[] = {
"2.9kHz", "1.5kHz", "735Hz", "403Hz", "196Hz", "98Hz", "49Hz"
@@ -608,6 +609,14 @@
SOC_SINGLE("DAC Soft Mute Switch", WM8996_DAC_SOFTMUTE, 1, 1, 0),
SOC_SINGLE("DAC Slow Soft Mute Switch", WM8996_DAC_SOFTMUTE, 0, 1, 0),
+SOC_SINGLE("DSP1 3D Stereo Switch", WM8996_DSP1_RX_FILTERS_2, 8, 1, 0),
+SOC_SINGLE("DSP2 3D Stereo Switch", WM8996_DSP2_RX_FILTERS_2, 8, 1, 0),
+
+SOC_SINGLE_TLV("DSP1 3D Stereo Volume", WM8996_DSP1_RX_FILTERS_2, 10, 15,
+ 0, threedstereo_tlv),
+SOC_SINGLE_TLV("DSP2 3D Stereo Volume", WM8996_DSP2_RX_FILTERS_2, 10, 15,
+ 0, threedstereo_tlv),
+
SOC_DOUBLE_TLV("Digital Output 1 Volume", WM8996_DAC1_HPOUT1_VOLUME, 0, 4,
8, 0, out_digital_tlv),
SOC_DOUBLE_TLV("Digital Output 2 Volume", WM8996_DAC2_HPOUT2_VOLUME, 0, 4,
@@ -632,6 +641,14 @@
SOC_SINGLE("DSP1 EQ Switch", WM8996_DSP1_RX_EQ_GAINS_1, 0, 1, 0),
SOC_SINGLE("DSP2 EQ Switch", WM8996_DSP2_RX_EQ_GAINS_1, 0, 1, 0),
+
+SOC_SINGLE("DSP1 DRC TXL Switch", WM8996_DSP1_DRC_1, 0, 1, 0),
+SOC_SINGLE("DSP1 DRC TXR Switch", WM8996_DSP1_DRC_1, 1, 1, 0),
+SOC_SINGLE("DSP1 DRC RX Switch", WM8996_DSP1_DRC_1, 2, 1, 0),
+
+SOC_SINGLE("DSP2 DRC TXL Switch", WM8996_DSP2_DRC_1, 0, 1, 0),
+SOC_SINGLE("DSP2 DRC TXR Switch", WM8996_DSP2_DRC_1, 1, 1, 0),
+SOC_SINGLE("DSP2 DRC RX Switch", WM8996_DSP2_DRC_1, 2, 1, 0),
};
static const struct snd_kcontrol_new wm8996_eq_controls[] = {
@@ -658,19 +675,75 @@
eq_tlv),
};
-static int cp_event(struct snd_soc_dapm_widget *w,
+static void wm8996_bg_enable(struct snd_soc_codec *codec)
+{
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+
+ wm8996->bg_ena++;
+ if (wm8996->bg_ena == 1) {
+ snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
+ WM8996_BG_ENA, WM8996_BG_ENA);
+ msleep(2);
+ }
+}
+
+static void wm8996_bg_disable(struct snd_soc_codec *codec)
+{
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+
+ wm8996->bg_ena--;
+ if (!wm8996->bg_ena)
+ snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
+ WM8996_BG_ENA, 0);
+}
+
+static int bg_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
+ struct snd_soc_codec *codec = w->codec;
+ int ret = 0;
+
switch (event) {
- case SND_SOC_DAPM_POST_PMU:
- msleep(5);
+ case SND_SOC_DAPM_PRE_PMU:
+ wm8996_bg_enable(codec);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ wm8996_bg_disable(codec);
break;
default:
BUG();
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ return ret;
+}
+
+static int cp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+ int ret = 0;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ ret = regulator_enable(wm8996->cpvdd);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to enable CPVDD: %d\n",
+ ret);
+ break;
+ case SND_SOC_DAPM_POST_PMU:
+ msleep(5);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ regulator_disable_deferred(wm8996->cpvdd, 20);
+ break;
+ default:
+ BUG();
+ ret = -EINVAL;
+ }
+
+ return ret;
}
static int rmv_short_event(struct snd_soc_dapm_widget *w,
@@ -698,7 +771,7 @@
{
struct i2c_client *i2c = to_i2c_client(codec->dev);
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
- int i, ret;
+ int ret;
unsigned long timeout = 200;
snd_soc_write(codec, WM8996_DC_SERVO_2, mask);
@@ -713,15 +786,12 @@
} else {
msleep(1);
- if (--i) {
- timeout = 0;
- break;
- }
+ timeout--;
}
ret = snd_soc_read(codec, WM8996_DC_SERVO_2);
dev_dbg(codec->dev, "DC servo state: %x\n", ret);
- } while (ret & mask);
+ } while (timeout && ret & mask);
if (timeout == 0)
dev_err(codec->dev, "DC servo timed out for %x\n", mask);
@@ -979,9 +1049,12 @@
SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event,
- SND_SOC_DAPM_POST_PMU),
-
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("MICB1 Audio", WM8996_MICBIAS_1, 4, 1, NULL, 0),
+SND_SOC_DAPM_SUPPLY("MICB2 Audio", WM8996_MICBIAS_2, 4, 1, NULL, 0),
SND_SOC_DAPM_MICBIAS("MICB2", WM8996_POWER_MANAGEMENT_1, 9, 0),
SND_SOC_DAPM_MICBIAS("MICB1", WM8996_POWER_MANAGEMENT_1, 8, 0),
@@ -1035,14 +1108,14 @@
SND_SOC_DAPM_DAC("DAC1L", NULL, WM8996_POWER_MANAGEMENT_5, 1, 0),
SND_SOC_DAPM_DAC("DAC1R", NULL, WM8996_POWER_MANAGEMENT_5, 0, 0),
-SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 1,
+SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 0,
WM8996_POWER_MANAGEMENT_4, 9, 0),
-SND_SOC_DAPM_AIF_IN("AIF2RX0", "AIF2 Playback", 2,
+SND_SOC_DAPM_AIF_IN("AIF2RX0", "AIF2 Playback", 1,
WM8996_POWER_MANAGEMENT_4, 8, 0),
-SND_SOC_DAPM_AIF_IN("AIF2TX1", "AIF2 Capture", 1,
+SND_SOC_DAPM_AIF_OUT("AIF2TX1", "AIF2 Capture", 0,
WM8996_POWER_MANAGEMENT_6, 9, 0),
-SND_SOC_DAPM_AIF_IN("AIF2TX0", "AIF2 Capture", 2,
+SND_SOC_DAPM_AIF_OUT("AIF2TX0", "AIF2 Capture", 1,
WM8996_POWER_MANAGEMENT_6, 8, 0),
SND_SOC_DAPM_AIF_IN("AIF1RX5", "AIF1 Playback", 5,
@@ -1137,17 +1210,23 @@
{ "Charge Pump", NULL, "SYSCLK" },
{ "MICB1", NULL, "LDO2" },
+ { "MICB1", NULL, "MICB1 Audio" },
+ { "MICB1", NULL, "Bandgap" },
{ "MICB2", NULL, "LDO2" },
+ { "MICB2", NULL, "MICB2 Audio" },
+ { "MICB2", NULL, "Bandgap" },
{ "IN1L PGA", NULL, "IN2LN" },
{ "IN1L PGA", NULL, "IN2LP" },
{ "IN1L PGA", NULL, "IN1LN" },
{ "IN1L PGA", NULL, "IN1LP" },
+ { "IN1L PGA", NULL, "Bandgap" },
{ "IN1R PGA", NULL, "IN2RN" },
{ "IN1R PGA", NULL, "IN2RP" },
{ "IN1R PGA", NULL, "IN1RN" },
{ "IN1R PGA", NULL, "IN1RP" },
+ { "IN1R PGA", NULL, "Bandgap" },
{ "ADCL", NULL, "IN1L PGA" },
@@ -1281,6 +1360,7 @@
{ "DAC2R", NULL, "DAC2R Mixer" },
{ "HPOUT2L PGA", NULL, "Charge Pump" },
+ { "HPOUT2L PGA", NULL, "Bandgap" },
{ "HPOUT2L PGA", NULL, "DAC2L" },
{ "HPOUT2L_DLY", NULL, "HPOUT2L PGA" },
{ "HPOUT2L_DCS", NULL, "HPOUT2L_DLY" },
@@ -1288,6 +1368,7 @@
{ "HPOUT2L_RMV_SHORT", NULL, "HPOUT2L_OUTP" },
{ "HPOUT2R PGA", NULL, "Charge Pump" },
+ { "HPOUT2R PGA", NULL, "Bandgap" },
{ "HPOUT2R PGA", NULL, "DAC2R" },
{ "HPOUT2R_DLY", NULL, "HPOUT2R PGA" },
{ "HPOUT2R_DCS", NULL, "HPOUT2R_DLY" },
@@ -1295,6 +1376,7 @@
{ "HPOUT2R_RMV_SHORT", NULL, "HPOUT2R_OUTP" },
{ "HPOUT1L PGA", NULL, "Charge Pump" },
+ { "HPOUT1L PGA", NULL, "Bandgap" },
{ "HPOUT1L PGA", NULL, "DAC1L" },
{ "HPOUT1L_DLY", NULL, "HPOUT1L PGA" },
{ "HPOUT1L_DCS", NULL, "HPOUT1L_DLY" },
@@ -1302,6 +1384,7 @@
{ "HPOUT1L_RMV_SHORT", NULL, "HPOUT1L_OUTP" },
{ "HPOUT1R PGA", NULL, "Charge Pump" },
+ { "HPOUT1R PGA", NULL, "Bandgap" },
{ "HPOUT1R PGA", NULL, "DAC1R" },
{ "HPOUT1R_DLY", NULL, "HPOUT1R PGA" },
{ "HPOUT1R_DCS", NULL, "HPOUT1R_DLY" },
@@ -1620,14 +1703,7 @@
switch (level) {
case SND_SOC_BIAS_ON:
- break;
-
case SND_SOC_BIAS_PREPARE:
- if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
- snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
- WM8996_BG_ENA, WM8996_BG_ENA);
- msleep(2);
- }
break;
case SND_SOC_BIAS_STANDBY:
@@ -1650,9 +1726,6 @@
codec->cache_only = false;
snd_soc_cache_sync(codec);
}
-
- snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
- WM8996_BG_ENA, 0);
break;
case SND_SOC_BIAS_OFF:
@@ -1847,7 +1920,7 @@
snd_soc_update_bits(codec, lrclk_reg, WM8996_AIF1RX_RATE_MASK,
lrclk);
snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_2,
- WM8996_DSP1_DIV_SHIFT << dsp_shift, dsp);
+ WM8996_DSP1_DIV_MASK << dsp_shift, dsp);
return 0;
}
@@ -2041,7 +2114,7 @@
struct i2c_client *i2c = to_i2c_client(codec->dev);
struct _fll_div fll_div;
unsigned long timeout;
- int ret, reg;
+ int ret, reg, retry;
/* Any change? */
if (source == wm8996->fll_src && Fref == wm8996->fll_fref &&
@@ -2057,6 +2130,8 @@
snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1,
WM8996_FLL_ENA, 0);
+ wm8996_bg_disable(codec);
+
return 0;
}
@@ -2111,6 +2186,11 @@
snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda);
+ /* Enable the bandgap if it's not already enabled */
+ ret = snd_soc_read(codec, WM8996_FLL_CONTROL_1);
+ if (!(ret & WM8996_FLL_ENA))
+ wm8996_bg_enable(codec);
+
/* Clear any pending completions (eg, from failed startups) */
try_wait_for_completion(&wm8996->fll_lock);
@@ -2128,17 +2208,29 @@
else
timeout = msecs_to_jiffies(2);
- /* Allow substantially longer if we've actually got the IRQ */
+ /* Allow substantially longer if we've actually got the IRQ, poll
+ * at a slightly higher rate if we don't.
+ */
if (i2c->irq)
- timeout *= 1000;
+ timeout *= 10;
+ else
+ timeout /= 2;
- ret = wait_for_completion_timeout(&wm8996->fll_lock, timeout);
+ for (retry = 0; retry < 10; retry++) {
+ ret = wait_for_completion_timeout(&wm8996->fll_lock,
+ timeout);
+ if (ret != 0) {
+ WARN_ON(!i2c->irq);
+ break;
+ }
- if (ret == 0 && i2c->irq) {
+ ret = snd_soc_read(codec, WM8996_INTERRUPT_RAW_STATUS_2);
+ if (ret & WM8996_FLL_LOCK_STS)
+ break;
+ }
+ if (retry == 10) {
dev_err(codec->dev, "Timed out waiting for FLL\n");
ret = -ETIMEDOUT;
- } else {
- ret = 0;
}
dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
@@ -2297,12 +2389,94 @@
/* Enable interrupts and we're off */
snd_soc_update_bits(codec, WM8996_INTERRUPT_STATUS_2_MASK,
- WM8996_IM_MICD_EINT, 0);
+ WM8996_IM_MICD_EINT | WM8996_HP_DONE_EINT, 0);
return 0;
}
EXPORT_SYMBOL_GPL(wm8996_detect);
+static void wm8996_hpdet_irq(struct snd_soc_codec *codec)
+{
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+ int val, reg, report;
+
+ /* Assume headphone in error conditions; we need to report
+ * something or we stall our state machine.
+ */
+ report = SND_JACK_HEADPHONE;
+
+ reg = snd_soc_read(codec, WM8996_HEADPHONE_DETECT_2);
+ if (reg < 0) {
+ dev_err(codec->dev, "Failed to read HPDET status\n");
+ goto out;
+ }
+
+ if (!(reg & WM8996_HP_DONE)) {
+ dev_err(codec->dev, "Got HPDET IRQ but HPDET is busy\n");
+ goto out;
+ }
+
+ val = reg & WM8996_HP_LVL_MASK;
+
+ dev_dbg(codec->dev, "HPDET measured %d ohms\n", val);
+
+ /* If we've got high enough impedence then report as line,
+ * otherwise assume headphone.
+ */
+ if (val >= 126)
+ report = SND_JACK_LINEOUT;
+ else
+ report = SND_JACK_HEADPHONE;
+
+out:
+ if (wm8996->jack_mic)
+ report |= SND_JACK_MICROPHONE;
+
+ snd_soc_jack_report(wm8996->jack, report,
+ SND_JACK_LINEOUT | SND_JACK_HEADSET);
+
+ wm8996->detecting = false;
+
+ /* If the output isn't running re-clamp it */
+ if (!(snd_soc_read(codec, WM8996_POWER_MANAGEMENT_1) &
+ (WM8996_HPOUT1L_ENA | WM8996_HPOUT1R_RMV_SHORT)))
+ snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1,
+ WM8996_HPOUT1L_RMV_SHORT |
+ WM8996_HPOUT1R_RMV_SHORT, 0);
+
+ /* Go back to looking at the microphone */
+ snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_1,
+ WM8996_JD_MODE_MASK, 0);
+ snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, WM8996_MICD_ENA,
+ WM8996_MICD_ENA);
+
+ snd_soc_dapm_disable_pin(&codec->dapm, "Bandgap");
+ snd_soc_dapm_sync(&codec->dapm);
+}
+
+static void wm8996_hpdet_start(struct snd_soc_codec *codec)
+{
+ /* Unclamp the output, we can't measure while we're shorting it */
+ snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1,
+ WM8996_HPOUT1L_RMV_SHORT |
+ WM8996_HPOUT1R_RMV_SHORT,
+ WM8996_HPOUT1L_RMV_SHORT |
+ WM8996_HPOUT1R_RMV_SHORT);
+
+ /* We need bandgap for HPDET */
+ snd_soc_dapm_force_enable_pin(&codec->dapm, "Bandgap");
+ snd_soc_dapm_sync(&codec->dapm);
+
+ /* Go into headphone detect left mode */
+ snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, WM8996_MICD_ENA, 0);
+ snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_1,
+ WM8996_JD_MODE_MASK, 1);
+
+ /* Trigger a measurement */
+ snd_soc_update_bits(codec, WM8996_HEADPHONE_DETECT_1,
+ WM8996_HP_POLL, WM8996_HP_POLL);
+}
+
static void wm8996_micd(struct snd_soc_codec *codec)
{
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
@@ -2323,28 +2497,36 @@
wm8996->jack_mic = false;
wm8996->detecting = true;
snd_soc_jack_report(wm8996->jack, 0,
- SND_JACK_HEADSET | SND_JACK_BTN_0);
+ SND_JACK_LINEOUT | SND_JACK_HEADSET |
+ SND_JACK_BTN_0);
+
snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
WM8996_MICD_RATE_MASK,
WM8996_MICD_RATE_MASK);
return;
}
- /* If the measurement is very high we've got a microphone but
- * do a little debounce to account for mechanical issues.
+ /* If the measurement is very high we've got a microphone,
+ * either we just detected one or if we already reported then
+ * we've got a button release event.
*/
if (val & 0x400) {
- dev_dbg(codec->dev, "Microphone detected\n");
- snd_soc_jack_report(wm8996->jack, SND_JACK_HEADSET,
- SND_JACK_HEADSET | SND_JACK_BTN_0);
- wm8996->jack_mic = true;
- wm8996->detecting = false;
+ if (wm8996->detecting) {
+ dev_dbg(codec->dev, "Microphone detected\n");
+ wm8996->jack_mic = true;
+ wm8996_hpdet_start(codec);
- /* Increase poll rate to give better responsiveness
- * for buttons */
- snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
- WM8996_MICD_RATE_MASK,
- 5 << WM8996_MICD_RATE_SHIFT);
+ /* Increase poll rate to give better responsiveness
+ * for buttons */
+ snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
+ WM8996_MICD_RATE_MASK,
+ 5 << WM8996_MICD_RATE_SHIFT);
+ } else {
+ dev_dbg(codec->dev, "Mic button up\n");
+ snd_soc_jack_report(wm8996->jack, 0, SND_JACK_BTN_0);
+ }
+
+ return;
}
/* If we detected a lower impedence during initial startup
@@ -2376,15 +2558,11 @@
if (val & 0x3fc) {
if (wm8996->jack_mic) {
dev_dbg(codec->dev, "Mic button detected\n");
- snd_soc_jack_report(wm8996->jack,
- SND_JACK_HEADSET | SND_JACK_BTN_0,
- SND_JACK_HEADSET | SND_JACK_BTN_0);
- } else {
- dev_dbg(codec->dev, "Headphone detected\n");
- snd_soc_jack_report(wm8996->jack,
- SND_JACK_HEADPHONE,
- SND_JACK_HEADSET |
+ snd_soc_jack_report(wm8996->jack, SND_JACK_BTN_0,
SND_JACK_BTN_0);
+ } else if (wm8996->detecting) {
+ dev_dbg(codec->dev, "Headphone detected\n");
+ wm8996_hpdet_start(codec);
/* Increase the detection rate a bit for
* responsiveness.
@@ -2392,8 +2570,6 @@
snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
WM8996_MICD_RATE_MASK,
7 << WM8996_MICD_RATE_SHIFT);
-
- wm8996->detecting = false;
}
}
}
@@ -2412,6 +2588,9 @@
}
irq_val &= ~snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2_MASK);
+ if (!irq_val)
+ return IRQ_NONE;
+
snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val);
if (irq_val & (WM8996_DCS_DONE_01_EINT | WM8996_DCS_DONE_23_EINT)) {
@@ -2430,10 +2609,10 @@
if (irq_val & WM8996_MICD_EINT)
wm8996_micd(codec);
- if (irq_val)
- return IRQ_HANDLED;
- else
- return IRQ_NONE;
+ if (irq_val & WM8996_HP_DONE_EINT)
+ wm8996_hpdet_irq(codec);
+
+ return IRQ_HANDLED;
}
static irqreturn_t wm8996_edge_irq(int irq, void *data)
@@ -2527,7 +2706,6 @@
init_completion(&wm8996->fll_lock);
dapm->idle_bias_off = true;
- dapm->bias_level = SND_SOC_BIAS_OFF;
ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C);
if (ret != 0) {
@@ -2548,7 +2726,13 @@
wm8996->disable_nb[0].notifier_call = wm8996_regulator_event_0;
wm8996->disable_nb[1].notifier_call = wm8996_regulator_event_1;
wm8996->disable_nb[2].notifier_call = wm8996_regulator_event_2;
- wm8996->disable_nb[3].notifier_call = wm8996_regulator_event_3;
+
+ wm8996->cpvdd = regulator_get(&i2c->dev, "CPVDD");
+ if (IS_ERR(wm8996->cpvdd)) {
+ ret = PTR_ERR(wm8996->cpvdd);
+ dev_err(&i2c->dev, "Failed to get CPVDD: %d\n", ret);
+ goto err_get;
+ }
/* This should really be moved into the regulator core */
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) {
@@ -2565,7 +2749,7 @@
wm8996->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
- goto err_get;
+ goto err_cpvdd;
}
if (wm8996->pdata.ldo_ena >= 0) {
@@ -2808,6 +2992,8 @@
gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+err_cpvdd:
+ regulator_put(wm8996->cpvdd);
err_get:
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
err:
@@ -2831,6 +3017,7 @@
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
+ regulator_put(wm8996->cpvdd);
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index a469132..3cd35a0 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -157,7 +157,6 @@
struct wm9081_priv {
enum snd_soc_control_type control_type;
- void *control_data;
int sysclk_source;
int mclk_rate;
int sysclk_rate;
@@ -174,6 +173,7 @@
{
switch (reg) {
case WM9081_SOFTWARE_RESET:
+ case WM9081_INTERRUPT_STATUS:
return 1;
default:
return 0;
@@ -820,7 +820,7 @@
/* VMID 2*240k */
reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x40;
+ reg |= 0x04;
snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Standby bias current on */
@@ -1120,8 +1120,8 @@
return 0;
}
-static int wm9081_set_sysclk(struct snd_soc_codec *codec,
- int clk_id, unsigned int freq, int dir)
+static int wm9081_set_sysclk(struct snd_soc_codec *codec, int clk_id,
+ int source, unsigned int freq, int dir)
{
struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
@@ -1213,7 +1213,6 @@
int ret;
u16 reg;
- codec->control_data = wm9081->control_data;
ret = snd_soc_codec_set_cache_io(codec, 8, 16, wm9081->control_type);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
@@ -1250,8 +1249,6 @@
snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
reg | WM9081_SPKPGAZC);
- snd_soc_add_controls(codec, wm9081_snd_controls,
- ARRAY_SIZE(wm9081_snd_controls));
if (!wm9081->pdata.num_retune_configs) {
dev_dbg(codec->dev,
"No ReTune Mobile data, using normal EQ\n");
@@ -1311,6 +1308,8 @@
.reg_cache_default = wm9081_reg_defaults,
.volatile_register = wm9081_volatile_register,
+ .controls = wm9081_snd_controls,
+ .num_controls = ARRAY_SIZE(wm9081_snd_controls),
.dapm_widgets = wm9081_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm9081_dapm_widgets),
.dapm_routes = wm9081_audio_paths,
@@ -1330,7 +1329,6 @@
i2c_set_clientdata(i2c, wm9081);
wm9081->control_type = SND_SOC_I2C;
- wm9081->control_data = i2c;
if (dev_get_platdata(&i2c->dev))
memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev),
diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c
index 4de1220..2b5252c 100644
--- a/sound/soc/codecs/wm9090.c
+++ b/sound/soc/codecs/wm9090.c
@@ -139,9 +139,7 @@
/* This struct is used to save the context */
struct wm9090_priv {
- struct mutex mutex;
struct wm9090_platform_data pdata;
- void *control_data;
};
static int wm9090_volatile(struct snd_soc_codec *codec, unsigned int reg)
@@ -550,10 +548,8 @@
static int wm9090_probe(struct snd_soc_codec *codec)
{
- struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
int ret;
- codec->control_data = wm9090->control_data;
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
@@ -662,8 +658,6 @@
sizeof(wm9090->pdata));
i2c_set_clientdata(i2c, wm9090);
- wm9090->control_data = i2c;
- mutex_init(&wm9090->mutex);
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm9090, NULL, 0);
@@ -684,6 +678,7 @@
static const struct i2c_device_id wm9090_id[] = {
{ "wm9090", 0 },
+ { "wm9093", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm9090_id);
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index e763c54..84f33d4 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -18,6 +18,7 @@
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/mfd/wm8994/registers.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -116,14 +117,23 @@
{
struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
s8 offset;
- u16 reg, reg_l, reg_r, dcs_cfg;
+ u16 reg, reg_l, reg_r, dcs_cfg, dcs_reg;
+
+ switch (hubs->dcs_readback_mode) {
+ case 2:
+ dcs_reg = WM8994_DC_SERVO_4E;
+ break;
+ default:
+ dcs_reg = WM8993_DC_SERVO_3;
+ break;
+ }
/* If we're using a digital only path and have a previously
* callibrated DC servo offset stored then use that. */
if (hubs->class_w && hubs->class_w_dcs) {
dev_dbg(codec->dev, "Using cached DC servo offset %x\n",
hubs->class_w_dcs);
- snd_soc_write(codec, WM8993_DC_SERVO_3, hubs->class_w_dcs);
+ snd_soc_write(codec, dcs_reg, hubs->class_w_dcs);
wait_for_dc_servo(codec,
WM8993_DCS_TRIG_DAC_WR_0 |
WM8993_DCS_TRIG_DAC_WR_1);
@@ -154,8 +164,9 @@
reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
& WM8993_DCS_INTEG_CHAN_1_MASK;
break;
+ case 2:
case 1:
- reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+ reg = snd_soc_read(codec, dcs_reg);
reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
>> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
@@ -168,24 +179,25 @@
dev_dbg(codec->dev, "DCS input: %x %x\n", reg_l, reg_r);
/* Apply correction to DC servo result */
- if (hubs->dcs_codes) {
- dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
- hubs->dcs_codes);
+ if (hubs->dcs_codes_l || hubs->dcs_codes_r) {
+ dev_dbg(codec->dev,
+ "Applying %d/%d code DC servo correction\n",
+ hubs->dcs_codes_l, hubs->dcs_codes_r);
/* HPOUT1R */
offset = reg_r;
- offset += hubs->dcs_codes;
+ offset += hubs->dcs_codes_r;
dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
/* HPOUT1L */
offset = reg_l;
- offset += hubs->dcs_codes;
+ offset += hubs->dcs_codes_l;
dcs_cfg |= (u8)offset;
dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);
/* Do it */
- snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
+ snd_soc_write(codec, dcs_reg, dcs_cfg);
wait_for_dc_servo(codec,
WM8993_DCS_TRIG_DAC_WR_0 |
WM8993_DCS_TRIG_DAC_WR_1);
@@ -210,14 +222,14 @@
struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
int ret;
- ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ ret = snd_soc_put_volsw(kcontrol, ucontrol);
/* Updating the analogue gains invalidates the DC servo cache */
hubs->class_w_dcs = 0;
/* If we're applying an offset correction then updating the
* callibration would be likely to introduce further offsets. */
- if (hubs->dcs_codes || hubs->no_series_update)
+ if (hubs->dcs_codes_l || hubs->dcs_codes_r || hubs->no_series_update)
return ret;
/* Only need to do this if the outputs are active */
@@ -350,19 +362,11 @@
SOC_ENUM("Speaker Reference", speaker_ref),
SOC_ENUM("Speaker Mode", speaker_mode),
-{
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Headphone Volume",
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
- SNDRV_CTL_ELEM_ACCESS_READWRITE,
- .tlv.p = outpga_tlv,
- .info = snd_soc_info_volsw_2r,
- .get = snd_soc_get_volsw_2r, .put = wm8993_put_dc_servo,
- .private_value = (unsigned long)&(struct soc_mixer_control) {
- .reg = WM8993_LEFT_OUTPUT_VOLUME,
- .rreg = WM8993_RIGHT_OUTPUT_VOLUME,
- .shift = 0, .max = 63
- },
-},
+SOC_DOUBLE_R_EXT_TLV("Headphone Volume",
+ WM8993_LEFT_OUTPUT_VOLUME, WM8993_RIGHT_OUTPUT_VOLUME,
+ 0, 63, 0, snd_soc_get_volsw, wm8993_put_dc_servo,
+ outpga_tlv),
+
SOC_DOUBLE_R("Headphone Switch", WM8993_LEFT_OUTPUT_VOLUME,
WM8993_RIGHT_OUTPUT_VOLUME, 6, 1, 0),
SOC_DOUBLE_R("Headphone ZC Switch", WM8993_LEFT_OUTPUT_VOLUME,
@@ -699,6 +703,11 @@
{ "IN1L PGA", "IN1LP Switch", "IN1LP" },
{ "IN1L PGA", "IN1LN Switch", "IN1LN" },
+ { "IN1L PGA", NULL, "VMID" },
+ { "IN1R PGA", NULL, "VMID" },
+ { "IN2L PGA", NULL, "VMID" },
+ { "IN2R PGA", NULL, "VMID" },
+
{ "IN1R PGA", "IN1RP Switch", "IN1RP" },
{ "IN1R PGA", "IN1RN Switch", "IN1RN" },
@@ -716,12 +725,14 @@
{ "MIXINL", NULL, "Direct Voice" },
{ "MIXINL", NULL, "IN1LP" },
{ "MIXINL", NULL, "Left Output Mixer" },
+ { "MIXINL", NULL, "VMID" },
{ "MIXINR", "IN1R Switch", "IN1R PGA" },
{ "MIXINR", "IN2R Switch", "IN2R PGA" },
{ "MIXINR", NULL, "Direct Voice" },
{ "MIXINR", NULL, "IN1RP" },
{ "MIXINR", NULL, "Right Output Mixer" },
+ { "MIXINR", NULL, "VMID" },
{ "ADCL", NULL, "MIXINL" },
{ "ADCR", NULL, "MIXINR" },
@@ -752,6 +763,7 @@
{ "Earpiece Mixer", "Left Output Switch", "Left Output PGA" },
{ "Earpiece Mixer", "Right Output Switch", "Right Output PGA" },
+ { "Earpiece Driver", NULL, "VMID" },
{ "Earpiece Driver", NULL, "Earpiece Mixer" },
{ "HPOUT2N", NULL, "Earpiece Driver" },
{ "HPOUT2P", NULL, "Earpiece Driver" },
@@ -774,9 +786,11 @@
{ "SPKR Boost", "SPKR Switch", "SPKR" },
{ "SPKR Boost", "SPKL Switch", "SPKL" },
+ { "SPKL Driver", NULL, "VMID" },
{ "SPKL Driver", NULL, "SPKL Boost" },
{ "SPKL Driver", NULL, "CLK_SYS" },
+ { "SPKR Driver", NULL, "VMID" },
{ "SPKR Driver", NULL, "SPKR Boost" },
{ "SPKR Driver", NULL, "CLK_SYS" },
@@ -790,12 +804,18 @@
{ "Headphone PGA", NULL, "Left Headphone Mux" },
{ "Headphone PGA", NULL, "Right Headphone Mux" },
+ { "Headphone PGA", NULL, "VMID" },
{ "Headphone PGA", NULL, "CLK_SYS" },
{ "Headphone PGA", NULL, "Headphone Supply" },
{ "HPOUT1L", NULL, "Headphone PGA" },
{ "HPOUT1R", NULL, "Headphone PGA" },
+ { "LINEOUT1N Driver", NULL, "VMID" },
+ { "LINEOUT1P Driver", NULL, "VMID" },
+ { "LINEOUT2N Driver", NULL, "VMID" },
+ { "LINEOUT2P Driver", NULL, "VMID" },
+
{ "LINEOUT1N", NULL, "LINEOUT1N Driver" },
{ "LINEOUT1P", NULL, "LINEOUT1P Driver" },
{ "LINEOUT2N", NULL, "LINEOUT2N Driver" },
diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h
index 676b125..c674c7a 100644
--- a/sound/soc/codecs/wm_hubs.h
+++ b/sound/soc/codecs/wm_hubs.h
@@ -23,7 +23,8 @@
/* This *must* be the first element of the codec->private_data struct */
struct wm_hubs_data {
- int dcs_codes;
+ int dcs_codes_l;
+ int dcs_codes_r;
int dcs_readback_mode;
int hp_startup_mode;
int series_startup;
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index fe79842..f78c3f0 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -150,8 +150,6 @@
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
snd_soc_dapm_enable_pin(dapm, "Line In");
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index d0d60b8..300e121 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -265,6 +265,7 @@
struct davinci_mcbsp_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
unsigned int pcr;
unsigned int srgr;
+ bool inv_fs = false;
/* Attention srgr is updated by hw_params! */
srgr = DAVINCI_MCBSP_SRGR_FSGM |
DAVINCI_MCBSP_SRGR_FPER(DEFAULT_BITPERSAMPLE * 2 - 1) |
@@ -330,7 +331,7 @@
* more empty bit clock slots between channels as the sample
* rate is lowered.
*/
- fmt ^= SND_SOC_DAIFMT_NB_IF;
+ inv_fs = true;
case SND_SOC_DAIFMT_DSP_A:
dev->mode = MOD_DSP_A;
break;
@@ -394,6 +395,8 @@
default:
return -EINVAL;
}
+ if (inv_fs == true)
+ pcr ^= (DAVINCI_MCBSP_PCR_FSXP | DAVINCI_MCBSP_PCR_FSRP);
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, srgr);
dev->pcr = pcr;
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, pcr);
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 8566238d..7173df2 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -732,16 +732,19 @@
davinci_hw_param(dev, substream->stream);
switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_U8:
case SNDRV_PCM_FORMAT_S8:
dma_params->data_type = 1;
word_length = DAVINCI_AUDIO_WORD_8;
break;
+ case SNDRV_PCM_FORMAT_U16_LE:
case SNDRV_PCM_FORMAT_S16_LE:
dma_params->data_type = 2;
word_length = DAVINCI_AUDIO_WORD_16;
break;
+ case SNDRV_PCM_FORMAT_U32_LE:
case SNDRV_PCM_FORMAT_S32_LE:
dma_params->data_type = 4;
word_length = DAVINCI_AUDIO_WORD_32;
@@ -818,6 +821,13 @@
};
+#define DAVINCI_MCASP_PCM_FMTS (SNDRV_PCM_FMTBIT_S8 | \
+ SNDRV_PCM_FMTBIT_U8 | \
+ SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_U16_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE | \
+ SNDRV_PCM_FMTBIT_U32_LE)
+
static struct snd_soc_dai_driver davinci_mcasp_dai[] = {
{
.name = "davinci-mcasp.0",
@@ -825,17 +835,13 @@
.channels_min = 2,
.channels_max = 2,
.rates = DAVINCI_MCASP_RATES,
- .formats = SNDRV_PCM_FMTBIT_S8 |
- SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S32_LE,
+ .formats = DAVINCI_MCASP_PCM_FMTS,
},
.capture = {
.channels_min = 2,
.channels_max = 2,
.rates = DAVINCI_MCASP_RATES,
- .formats = SNDRV_PCM_FMTBIT_S8 |
- SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S32_LE,
+ .formats = DAVINCI_MCASP_PCM_FMTS,
},
.ops = &davinci_mcasp_dai_ops,
@@ -846,7 +852,7 @@
.channels_min = 1,
.channels_max = 384,
.rates = DAVINCI_MCASP_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .formats = DAVINCI_MCASP_PCM_FMTS,
},
.ops = &davinci_mcasp_dai_ops,
},
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index a49e667..d5fe08c 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -180,7 +180,6 @@
{
struct davinci_runtime_data *prtd = substream->runtime->private_data;
struct snd_pcm_runtime *runtime = substream->runtime;
- int link = prtd->asp_link[0];
unsigned int period_size;
unsigned int dma_offset;
dma_addr_t dma_pos;
@@ -198,7 +197,8 @@
fifo_level = prtd->params->fifo_level;
pr_debug("davinci_pcm: audio_set_dma_params_play channel = %d "
- "dma_ptr = %x period_size=%x\n", link, dma_pos, period_size);
+ "dma_ptr = %x period_size=%x\n", prtd->asp_link[0], dma_pos,
+ period_size);
data_type = prtd->params->data_type;
count = period_size / data_type;
@@ -222,17 +222,19 @@
}
acnt = prtd->params->acnt;
- edma_set_src(link, src, INCR, W8BIT);
- edma_set_dest(link, dst, INCR, W8BIT);
+ edma_set_src(prtd->asp_link[0], src, INCR, W8BIT);
+ edma_set_dest(prtd->asp_link[0], dst, INCR, W8BIT);
- edma_set_src_index(link, src_bidx, src_cidx);
- edma_set_dest_index(link, dst_bidx, dst_cidx);
+ edma_set_src_index(prtd->asp_link[0], src_bidx, src_cidx);
+ edma_set_dest_index(prtd->asp_link[0], dst_bidx, dst_cidx);
if (!fifo_level)
- edma_set_transfer_params(link, acnt, count, 1, 0, ASYNC);
+ edma_set_transfer_params(prtd->asp_link[0], acnt, count, 1, 0,
+ ASYNC);
else
- edma_set_transfer_params(link, acnt, fifo_level, count,
- fifo_level, ABSYNC);
+ edma_set_transfer_params(prtd->asp_link[0], acnt, fifo_level,
+ count, fifo_level,
+ ABSYNC);
}
static void davinci_pcm_dma_irq(unsigned link, u16 ch_status, void *data)
@@ -305,7 +307,6 @@
unsigned int acnt = params->acnt;
/* divide by 2 for ping/pong */
unsigned int ping_size = snd_pcm_lib_period_bytes(substream) >> 1;
- int link = prtd->asp_link[1];
unsigned int fifo_level = prtd->params->fifo_level;
unsigned int count;
if ((data_type == 0) || (data_type > 4)) {
@@ -316,28 +317,26 @@
dma_addr_t asp_src_pong = iram_dma->addr + ping_size;
ram_src_cidx = ping_size;
ram_dst_cidx = -ping_size;
- edma_set_src(link, asp_src_pong, INCR, W8BIT);
+ edma_set_src(prtd->asp_link[1], asp_src_pong, INCR, W8BIT);
- link = prtd->asp_link[0];
- edma_set_src_index(link, data_type, data_type * fifo_level);
- link = prtd->asp_link[1];
- edma_set_src_index(link, data_type, data_type * fifo_level);
+ edma_set_src_index(prtd->asp_link[0], data_type,
+ data_type * fifo_level);
+ edma_set_src_index(prtd->asp_link[1], data_type,
+ data_type * fifo_level);
- link = prtd->ram_link;
- edma_set_src(link, runtime->dma_addr, INCR, W32BIT);
+ edma_set_src(prtd->ram_link, runtime->dma_addr, INCR, W32BIT);
} else {
dma_addr_t asp_dst_pong = iram_dma->addr + ping_size;
ram_src_cidx = -ping_size;
ram_dst_cidx = ping_size;
- edma_set_dest(link, asp_dst_pong, INCR, W8BIT);
+ edma_set_dest(prtd->asp_link[1], asp_dst_pong, INCR, W8BIT);
- link = prtd->asp_link[0];
- edma_set_dest_index(link, data_type, data_type * fifo_level);
- link = prtd->asp_link[1];
- edma_set_dest_index(link, data_type, data_type * fifo_level);
+ edma_set_dest_index(prtd->asp_link[0], data_type,
+ data_type * fifo_level);
+ edma_set_dest_index(prtd->asp_link[1], data_type,
+ data_type * fifo_level);
- link = prtd->ram_link;
- edma_set_dest(link, runtime->dma_addr, INCR, W32BIT);
+ edma_set_dest(prtd->ram_link, runtime->dma_addr, INCR, W32BIT);
}
if (!fifo_level) {
@@ -354,10 +353,9 @@
count, fifo_level, ABSYNC);
}
- link = prtd->ram_link;
- edma_set_src_index(link, ping_size, ram_src_cidx);
- edma_set_dest_index(link, ping_size, ram_dst_cidx);
- edma_set_transfer_params(link, ping_size, 2,
+ edma_set_src_index(prtd->ram_link, ping_size, ram_src_cidx);
+ edma_set_dest_index(prtd->ram_link, ping_size, ram_dst_cidx);
+ edma_set_transfer_params(prtd->ram_link, ping_size, 2,
runtime->periods, 2, ASYNC);
/* init master params */
@@ -406,32 +404,32 @@
{
dma_addr_t asp_src_ping;
dma_addr_t asp_dst_ping;
- int link;
+ int ret;
struct davinci_pcm_dma_params *params = prtd->params;
/* Request ram master channel */
- link = prtd->ram_channel = edma_alloc_channel(EDMA_CHANNEL_ANY,
+ ret = prtd->ram_channel = edma_alloc_channel(EDMA_CHANNEL_ANY,
davinci_pcm_dma_irq, substream,
prtd->params->ram_chan_q);
- if (link < 0)
+ if (ret < 0)
goto exit1;
/* Request ram link channel */
- link = prtd->ram_link = edma_alloc_slot(
+ ret = prtd->ram_link = edma_alloc_slot(
EDMA_CTLR(prtd->ram_channel), EDMA_SLOT_ANY);
- if (link < 0)
+ if (ret < 0)
goto exit2;
- link = prtd->asp_link[1] = edma_alloc_slot(
+ ret = prtd->asp_link[1] = edma_alloc_slot(
EDMA_CTLR(prtd->asp_channel), EDMA_SLOT_ANY);
- if (link < 0)
+ if (ret < 0)
goto exit3;
prtd->ram_link2 = -1;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- link = prtd->ram_link2 = edma_alloc_slot(
+ ret = prtd->ram_link2 = edma_alloc_slot(
EDMA_CTLR(prtd->ram_channel), EDMA_SLOT_ANY);
- if (link < 0)
+ if (ret < 0)
goto exit4;
}
/* circle ping-pong buffers */
@@ -448,36 +446,33 @@
asp_dst_ping = iram_dma->addr;
}
/* ping */
- link = prtd->asp_link[0];
- edma_set_src(link, asp_src_ping, INCR, W16BIT);
- edma_set_dest(link, asp_dst_ping, INCR, W16BIT);
- edma_set_src_index(link, 0, 0);
- edma_set_dest_index(link, 0, 0);
+ edma_set_src(prtd->asp_link[0], asp_src_ping, INCR, W16BIT);
+ edma_set_dest(prtd->asp_link[0], asp_dst_ping, INCR, W16BIT);
+ edma_set_src_index(prtd->asp_link[0], 0, 0);
+ edma_set_dest_index(prtd->asp_link[0], 0, 0);
- edma_read_slot(link, &prtd->asp_params);
+ edma_read_slot(prtd->asp_link[0], &prtd->asp_params);
prtd->asp_params.opt &= ~(TCCMODE | EDMA_TCC(0x3f) | TCINTEN);
prtd->asp_params.opt |= TCCHEN |
EDMA_TCC(prtd->ram_channel & 0x3f);
- edma_write_slot(link, &prtd->asp_params);
+ edma_write_slot(prtd->asp_link[0], &prtd->asp_params);
/* pong */
- link = prtd->asp_link[1];
- edma_set_src(link, asp_src_ping, INCR, W16BIT);
- edma_set_dest(link, asp_dst_ping, INCR, W16BIT);
- edma_set_src_index(link, 0, 0);
- edma_set_dest_index(link, 0, 0);
+ edma_set_src(prtd->asp_link[1], asp_src_ping, INCR, W16BIT);
+ edma_set_dest(prtd->asp_link[1], asp_dst_ping, INCR, W16BIT);
+ edma_set_src_index(prtd->asp_link[1], 0, 0);
+ edma_set_dest_index(prtd->asp_link[1], 0, 0);
- edma_read_slot(link, &prtd->asp_params);
+ edma_read_slot(prtd->asp_link[1], &prtd->asp_params);
prtd->asp_params.opt &= ~(TCCMODE | EDMA_TCC(0x3f));
/* interrupt after every pong completion */
prtd->asp_params.opt |= TCINTEN | TCCHEN |
EDMA_TCC(prtd->ram_channel & 0x3f);
- edma_write_slot(link, &prtd->asp_params);
+ edma_write_slot(prtd->asp_link[1], &prtd->asp_params);
/* ram */
- link = prtd->ram_link;
- edma_set_src(link, iram_dma->addr, INCR, W32BIT);
- edma_set_dest(link, iram_dma->addr, INCR, W32BIT);
+ edma_set_src(prtd->ram_link, iram_dma->addr, INCR, W32BIT);
+ edma_set_dest(prtd->ram_link, iram_dma->addr, INCR, W32BIT);
pr_debug("%s: audio dma channels/slots in use for ram:%u %u %u,"
"for asp:%u %u %u\n", __func__,
prtd->ram_channel, prtd->ram_link, prtd->ram_link2,
@@ -494,7 +489,7 @@
edma_free_channel(prtd->ram_channel);
prtd->ram_channel = -1;
exit1:
- return link;
+ return ret;
}
static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
@@ -502,22 +497,22 @@
struct snd_dma_buffer *iram_dma;
struct davinci_runtime_data *prtd = substream->runtime->private_data;
struct davinci_pcm_dma_params *params = prtd->params;
- int link;
+ int ret;
if (!params)
return -ENODEV;
/* Request asp master DMA channel */
- link = prtd->asp_channel = edma_alloc_channel(params->channel,
+ ret = prtd->asp_channel = edma_alloc_channel(params->channel,
davinci_pcm_dma_irq, substream,
prtd->params->asp_chan_q);
- if (link < 0)
+ if (ret < 0)
goto exit1;
/* Request asp link channels */
- link = prtd->asp_link[0] = edma_alloc_slot(
+ ret = prtd->asp_link[0] = edma_alloc_slot(
EDMA_CTLR(prtd->asp_channel), EDMA_SLOT_ANY);
- if (link < 0)
+ if (ret < 0)
goto exit2;
iram_dma = (struct snd_dma_buffer *)substream->dma_buffer.private_data;
@@ -537,17 +532,17 @@
* the buffer and its length (ccnt) ... use it as a template
* so davinci_pcm_enqueue_dma() takes less time in IRQ.
*/
- edma_read_slot(link, &prtd->asp_params);
+ edma_read_slot(prtd->asp_link[0], &prtd->asp_params);
prtd->asp_params.opt |= TCINTEN |
EDMA_TCC(EDMA_CHAN_SLOT(prtd->asp_channel));
- prtd->asp_params.link_bcntrld = EDMA_CHAN_SLOT(link) << 5;
- edma_write_slot(link, &prtd->asp_params);
+ prtd->asp_params.link_bcntrld = EDMA_CHAN_SLOT(prtd->asp_link[0]) << 5;
+ edma_write_slot(prtd->asp_link[0], &prtd->asp_params);
return 0;
exit2:
edma_free_channel(prtd->asp_channel);
prtd->asp_channel = -1;
exit1:
- return link;
+ return ret;
}
static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
diff --git a/sound/soc/ep93xx/edb93xx.c b/sound/soc/ep93xx/edb93xx.c
index d3aa151..0134d4e 100644
--- a/sound/soc/ep93xx/edb93xx.c
+++ b/sound/soc/ep93xx/edb93xx.c
@@ -28,12 +28,6 @@
#include <mach/hardware.h>
#include "ep93xx-pcm.h"
-#define edb93xx_has_audio() (machine_is_edb9301() || \
- machine_is_edb9302() || \
- machine_is_edb9302a() || \
- machine_is_edb9307a() || \
- machine_is_edb9315a())
-
static int edb93xx_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -94,49 +88,61 @@
.num_links = 1,
};
-static struct platform_device *edb93xx_snd_device;
-
-static int __init edb93xx_init(void)
+static int __devinit edb93xx_probe(struct platform_device *pdev)
{
+ struct snd_soc_card *card = &snd_soc_edb93xx;
int ret;
- if (!edb93xx_has_audio())
- return -ENODEV;
-
ret = ep93xx_i2s_acquire(EP93XX_SYSCON_DEVCFG_I2SONAC97,
EP93XX_SYSCON_I2SCLKDIV_ORIDE |
EP93XX_SYSCON_I2SCLKDIV_SPOL);
if (ret)
return ret;
- edb93xx_snd_device = platform_device_alloc("soc-audio", -1);
- if (!edb93xx_snd_device) {
- ret = -ENOMEM;
- goto free_i2s;
+ card->dev = &pdev->dev;
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+ ep93xx_i2s_release();
}
- platform_set_drvdata(edb93xx_snd_device, &snd_soc_edb93xx);
- ret = platform_device_add(edb93xx_snd_device);
- if (ret)
- goto device_put;
+ return ret;
+}
+
+static int __devexit edb93xx_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+ ep93xx_i2s_release();
return 0;
+}
-device_put:
- platform_device_put(edb93xx_snd_device);
-free_i2s:
- ep93xx_i2s_release();
- return ret;
+static struct platform_driver edb93xx_driver = {
+ .driver = {
+ .name = "edb93xx-audio",
+ .owner = THIS_MODULE,
+ },
+ .probe = edb93xx_probe,
+ .remove = __devexit_p(edb93xx_remove),
+};
+
+static int __init edb93xx_init(void)
+{
+ return platform_driver_register(&edb93xx_driver);
}
module_init(edb93xx_init);
static void __exit edb93xx_exit(void)
{
- platform_device_unregister(edb93xx_snd_device);
- ep93xx_i2s_release();
+ platform_driver_unregister(&edb93xx_driver);
}
module_exit(edb93xx_exit);
MODULE_AUTHOR("Alexander Sverdlin <subaparts@yandex.ru>");
MODULE_DESCRIPTION("ALSA SoC EDB93xx");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:edb93xx-audio");
diff --git a/sound/soc/ep93xx/ep93xx-ac97.c b/sound/soc/ep93xx/ep93xx-ac97.c
index c7417c7..3cd6158 100644
--- a/sound/soc/ep93xx/ep93xx-ac97.c
+++ b/sound/soc/ep93xx/ep93xx-ac97.c
@@ -335,7 +335,7 @@
.trigger = ep93xx_ac97_trigger,
};
-struct snd_soc_dai_driver ep93xx_ac97_dai = {
+static struct snd_soc_dai_driver ep93xx_ac97_dai = {
.name = "ep93xx-ac97",
.id = 0,
.ac97_control = 1,
diff --git a/sound/soc/ep93xx/ep93xx-pcm.c b/sound/soc/ep93xx/ep93xx-pcm.c
index 8dfd3ad..d00230a 100644
--- a/sound/soc/ep93xx/ep93xx-pcm.c
+++ b/sound/soc/ep93xx/ep93xx-pcm.c
@@ -355,3 +355,4 @@
MODULE_AUTHOR("Ryan Mallon");
MODULE_DESCRIPTION("EP93xx ALSA PCM interface");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-pcm-audio");
diff --git a/sound/soc/ep93xx/simone.c b/sound/soc/ep93xx/simone.c
index 2868179..968cb31 100644
--- a/sound/soc/ep93xx/simone.c
+++ b/sound/soc/ep93xx/simone.c
@@ -39,53 +39,61 @@
};
static struct platform_device *simone_snd_ac97_device;
-static struct platform_device *simone_snd_device;
+
+static int __devinit simone_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &snd_soc_simone;
+ int ret;
+
+ simone_snd_ac97_device = platform_device_register_simple("ac97-codec",
+ -1, NULL, 0);
+ if (IS_ERR(simone_snd_ac97_device))
+ return PTR_ERR(simone_snd_ac97_device);
+
+ card->dev = &pdev->dev;
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+ platform_device_unregister(simone_snd_ac97_device);
+ }
+
+ return ret;
+}
+
+static int __devexit simone_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+ platform_device_unregister(simone_snd_ac97_device);
+
+ return 0;
+}
+
+static struct platform_driver simone_driver = {
+ .driver = {
+ .name = "simone-audio",
+ .owner = THIS_MODULE,
+ },
+ .probe = simone_probe,
+ .remove = __devexit_p(simone_remove),
+};
static int __init simone_init(void)
{
- int ret;
-
- if (!machine_is_sim_one())
- return -ENODEV;
-
- simone_snd_ac97_device = platform_device_alloc("ac97-codec", -1);
- if (!simone_snd_ac97_device)
- return -ENOMEM;
-
- ret = platform_device_add(simone_snd_ac97_device);
- if (ret)
- goto fail1;
-
- simone_snd_device = platform_device_alloc("soc-audio", -1);
- if (!simone_snd_device) {
- ret = -ENOMEM;
- goto fail2;
- }
-
- platform_set_drvdata(simone_snd_device, &snd_soc_simone);
- ret = platform_device_add(simone_snd_device);
- if (ret)
- goto fail3;
-
- return 0;
-
-fail3:
- platform_device_put(simone_snd_device);
-fail2:
- platform_device_del(simone_snd_ac97_device);
-fail1:
- platform_device_put(simone_snd_ac97_device);
- return ret;
+ return platform_driver_register(&simone_driver);
}
module_init(simone_init);
static void __exit simone_exit(void)
{
- platform_device_unregister(simone_snd_device);
- platform_device_unregister(simone_snd_ac97_device);
+ platform_driver_unregister(&simone_driver);
}
module_exit(simone_exit);
MODULE_DESCRIPTION("ALSA SoC Simplemachines Sim.One");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:simone-audio");
diff --git a/sound/soc/ep93xx/snappercl15.c b/sound/soc/ep93xx/snappercl15.c
index c8aa8a5..f74ac54 100644
--- a/sound/soc/ep93xx/snappercl15.c
+++ b/sound/soc/ep93xx/snappercl15.c
@@ -104,37 +104,56 @@
.num_links = 1,
};
-static struct platform_device *snappercl15_snd_device;
-
-static int __init snappercl15_init(void)
+static int __devinit snappercl15_probe(struct platform_device *pdev)
{
+ struct snd_soc_card *card = &snd_soc_snappercl15;
int ret;
- if (!machine_is_snapper_cl15())
- return -ENODEV;
-
ret = ep93xx_i2s_acquire(EP93XX_SYSCON_DEVCFG_I2SONAC97,
EP93XX_SYSCON_I2SCLKDIV_ORIDE |
EP93XX_SYSCON_I2SCLKDIV_SPOL);
if (ret)
return ret;
- snappercl15_snd_device = platform_device_alloc("soc-audio", -1);
- if (!snappercl15_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(snappercl15_snd_device, &snd_soc_snappercl15);
- ret = platform_device_add(snappercl15_snd_device);
- if (ret)
- platform_device_put(snappercl15_snd_device);
+ card->dev = &pdev->dev;
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+ ep93xx_i2s_release();
+ }
return ret;
}
+static int __devexit snappercl15_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+ ep93xx_i2s_release();
+
+ return 0;
+}
+
+static struct platform_driver snappercl15_driver = {
+ .driver = {
+ .name = "snappercl15-audio",
+ .owner = THIS_MODULE,
+ },
+ .probe = snappercl15_probe,
+ .remove = __devexit_p(snappercl15_remove),
+};
+
+static int __init snappercl15_init(void)
+{
+ return platform_driver_register(&snappercl15_driver);
+}
+
static void __exit snappercl15_exit(void)
{
- platform_device_unregister(snappercl15_snd_device);
- ep93xx_i2s_release();
+ platform_driver_unregister(&snappercl15_driver);
}
module_init(snappercl15_init);
@@ -143,4 +162,4 @@
MODULE_AUTHOR("Ryan Mallon");
MODULE_DESCRIPTION("ALSA SoC Snapper CL15");
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:snappercl15-audio");
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index cb50598..ef15402 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -297,7 +297,6 @@
static int fsl_dma_new(struct snd_soc_pcm_runtime *rtd)
{
struct snd_card *card = rtd->card->snd_card;
- struct snd_soc_dai *dai = rtd->cpu_dai;
struct snd_pcm *pcm = rtd->pcm;
static u64 fsl_dma_dmamask = DMA_BIT_MASK(36);
int ret;
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index d48afea..0268cf9 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -78,7 +78,6 @@
* @second_stream: pointer to second stream
* @playback: the number of playback streams opened
* @capture: the number of capture streams opened
- * @asynchronous: 0=synchronous mode, 1=asynchronous mode
* @cpu_dai: the CPU DAI for this device
* @dev_attr: the sysfs device attribute structure
* @stats: SSI statistics
@@ -90,9 +89,6 @@
unsigned int irq;
struct snd_pcm_substream *first_stream;
struct snd_pcm_substream *second_stream;
- unsigned int playback;
- unsigned int capture;
- int asynchronous;
unsigned int fifo_depth;
struct snd_soc_dai_driver cpu_dai_drv;
struct device_attribute dev_attr;
@@ -281,24 +277,18 @@
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+ struct fsl_ssi_private *ssi_private =
+ snd_soc_dai_get_drvdata(rtd->cpu_dai);
+ int synchronous = ssi_private->cpu_dai_drv.symmetric_rates;
/*
* If this is the first stream opened, then request the IRQ
* and initialize the SSI registers.
*/
- if (!ssi_private->playback && !ssi_private->capture) {
+ if (!ssi_private->first_stream) {
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
- int ret;
- /* The 'name' should not have any slashes in it. */
- ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0,
- ssi_private->name, ssi_private);
- if (ret < 0) {
- dev_err(substream->pcm->card->dev,
- "could not claim irq %u\n", ssi_private->irq);
- return ret;
- }
+ ssi_private->first_stream = substream;
/*
* Section 16.5 of the MPC8610 reference manual says that the
@@ -316,7 +306,7 @@
clrsetbits_be32(&ssi->scr,
CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE
- | (ssi_private->asynchronous ? 0 : CCSR_SSI_SCR_SYN));
+ | (synchronous ? CCSR_SSI_SCR_SYN : 0));
out_be32(&ssi->stcr,
CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
@@ -333,7 +323,7 @@
* master.
*/
- /* 4. Enable the interrupts and DMA requests */
+ /* Enable the interrupts and DMA requests */
out_be32(&ssi->sier, SIER_FLAGS);
/*
@@ -362,58 +352,47 @@
* this is bad is because at this point, the PCM driver has not
* finished initializing the DMA controller.
*/
- }
+ } else {
+ if (synchronous) {
+ struct snd_pcm_runtime *first_runtime =
+ ssi_private->first_stream->runtime;
+ /*
+ * This is the second stream open, and we're in
+ * synchronous mode, so we need to impose sample
+ * sample size constraints. This is because STCCR is
+ * used for playback and capture in synchronous mode,
+ * so there's no way to specify different word
+ * lengths.
+ *
+ * Note that this can cause a race condition if the
+ * second stream is opened before the first stream is
+ * fully initialized. We provide some protection by
+ * checking to make sure the first stream is
+ * initialized, but it's not perfect. ALSA sometimes
+ * re-initializes the driver with a different sample
+ * rate or size. If the second stream is opened
+ * before the first stream has received its final
+ * parameters, then the second stream may be
+ * constrained to the wrong sample rate or size.
+ */
+ if (!first_runtime->sample_bits) {
+ dev_err(substream->pcm->card->dev,
+ "set sample size in %s stream first\n",
+ substream->stream ==
+ SNDRV_PCM_STREAM_PLAYBACK
+ ? "capture" : "playback");
+ return -EAGAIN;
+ }
- if (!ssi_private->first_stream)
- ssi_private->first_stream = substream;
- else {
- /* This is the second stream open, so we need to impose sample
- * rate and maybe sample size constraints. Note that this can
- * cause a race condition if the second stream is opened before
- * the first stream is fully initialized.
- *
- * We provide some protection by checking to make sure the first
- * stream is initialized, but it's not perfect. ALSA sometimes
- * re-initializes the driver with a different sample rate or
- * size. If the second stream is opened before the first stream
- * has received its final parameters, then the second stream may
- * be constrained to the wrong sample rate or size.
- *
- * FIXME: This code does not handle opening and closing streams
- * repeatedly. If you open two streams and then close the first
- * one, you may not be able to open another stream until you
- * close the second one as well.
- */
- struct snd_pcm_runtime *first_runtime =
- ssi_private->first_stream->runtime;
-
- if (!first_runtime->sample_bits) {
- dev_err(substream->pcm->card->dev,
- "set sample size in %s stream first\n",
- substream->stream == SNDRV_PCM_STREAM_PLAYBACK
- ? "capture" : "playback");
- return -EAGAIN;
- }
-
- /* If we're in synchronous mode, then we need to constrain
- * the sample size as well. We don't support independent sample
- * rates in asynchronous mode.
- */
- if (!ssi_private->asynchronous)
snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
first_runtime->sample_bits,
first_runtime->sample_bits);
+ }
ssi_private->second_stream = substream;
}
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ssi_private->playback++;
-
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
- ssi_private->capture++;
-
return 0;
}
@@ -434,24 +413,35 @@
struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *cpu_dai)
{
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ unsigned int sample_size =
+ snd_pcm_format_width(params_format(hw_params));
+ u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
+ int enabled = in_be32(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
- if (substream == ssi_private->first_stream) {
- struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
- unsigned int sample_size =
- snd_pcm_format_width(params_format(hw_params));
- u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
+ /*
+ * If we're in synchronous mode, and the SSI is already enabled,
+ * then STCCR is already set properly.
+ */
+ if (enabled && ssi_private->cpu_dai_drv.symmetric_rates)
+ return 0;
- /* The SSI should always be disabled at this points (SSIEN=0) */
+ /*
+ * FIXME: The documentation says that SxCCR[WL] should not be
+ * modified while the SSI is enabled. The only time this can
+ * happen is if we're trying to do simultaneous playback and
+ * capture in asynchronous mode. Unfortunately, I have been enable
+ * to get that to work at all on the P1022DS. Therefore, we don't
+ * bother to disable/enable the SSI when setting SxCCR[WL], because
+ * the SSI will stop anyway. Maybe one day, this will get fixed.
+ */
- /* In synchronous mode, the SSI uses STCCR for capture */
- if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ||
- !ssi_private->asynchronous)
- clrsetbits_be32(&ssi->stccr,
- CCSR_SSI_SxCCR_WL_MASK, wl);
- else
- clrsetbits_be32(&ssi->srccr,
- CCSR_SSI_SxCCR_WL_MASK, wl);
- }
+ /* In synchronous mode, the SSI uses STCCR for capture */
+ if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ||
+ ssi_private->cpu_dai_drv.symmetric_rates)
+ clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+ else
+ clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
return 0;
}
@@ -474,7 +464,6 @@
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
setbits32(&ssi->scr,
@@ -510,27 +499,18 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(rtd->cpu_dai);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ssi_private->playback--;
-
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
- ssi_private->capture--;
-
if (ssi_private->first_stream == substream)
ssi_private->first_stream = ssi_private->second_stream;
ssi_private->second_stream = NULL;
/*
- * If this is the last active substream, disable the SSI and release
- * the IRQ.
+ * If this is the last active substream, disable the SSI.
*/
- if (!ssi_private->playback && !ssi_private->capture) {
+ if (!ssi_private->first_stream) {
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
-
- free_irq(ssi_private->irq, ssi_private);
}
}
@@ -675,22 +655,33 @@
ret = of_address_to_resource(np, 0, &res);
if (ret) {
dev_err(&pdev->dev, "could not determine device resources\n");
- kfree(ssi_private);
- return ret;
+ goto error_kmalloc;
}
ssi_private->ssi = of_iomap(np, 0);
if (!ssi_private->ssi) {
dev_err(&pdev->dev, "could not map device resources\n");
- kfree(ssi_private);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error_kmalloc;
}
ssi_private->ssi_phys = res.start;
+
ssi_private->irq = irq_of_parse_and_map(np, 0);
+ if (ssi_private->irq == NO_IRQ) {
+ dev_err(&pdev->dev, "no irq for node %s\n", np->full_name);
+ ret = -ENXIO;
+ goto error_iomap;
+ }
+
+ /* The 'name' should not have any slashes in it. */
+ ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0, ssi_private->name,
+ ssi_private);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not claim irq %u\n", ssi_private->irq);
+ goto error_irqmap;
+ }
/* Are the RX and the TX clocks locked? */
- if (of_find_property(np, "fsl,ssi-asynchronous", NULL))
- ssi_private->asynchronous = 1;
- else
+ if (!of_find_property(np, "fsl,ssi-asynchronous", NULL))
ssi_private->cpu_dai_drv.symmetric_rates = 1;
/* Determine the FIFO depth. */
@@ -711,7 +702,7 @@
if (ret) {
dev_err(&pdev->dev, "could not create sysfs %s file\n",
ssi_private->dev_attr.attr.name);
- goto error;
+ goto error_irq;
}
/* Register with ASoC */
@@ -720,7 +711,7 @@
ret = snd_soc_register_dai(&pdev->dev, &ssi_private->cpu_dai_drv);
if (ret) {
dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
- goto error;
+ goto error_dev;
}
/* Trigger the machine driver's probe function. The platform driver
@@ -741,18 +732,28 @@
if (IS_ERR(ssi_private->pdev)) {
ret = PTR_ERR(ssi_private->pdev);
dev_err(&pdev->dev, "failed to register platform: %d\n", ret);
- goto error;
+ goto error_dai;
}
return 0;
-error:
+error_dai:
snd_soc_unregister_dai(&pdev->dev);
+
+error_dev:
dev_set_drvdata(&pdev->dev, NULL);
- if (dev_attr)
- device_remove_file(&pdev->dev, dev_attr);
+ device_remove_file(&pdev->dev, dev_attr);
+
+error_irq:
+ free_irq(ssi_private->irq, ssi_private);
+
+error_irqmap:
irq_dispose_mapping(ssi_private->irq);
+
+error_iomap:
iounmap(ssi_private->ssi);
+
+error_kmalloc:
kfree(ssi_private);
return ret;
@@ -766,6 +767,9 @@
snd_soc_unregister_dai(&pdev->dev);
device_remove_file(&pdev->dev, &ssi_private->dev_attr);
+ free_irq(ssi_private->irq, ssi_private);
+ irq_dispose_mapping(ssi_private->irq);
+
kfree(ssi_private);
dev_set_drvdata(&pdev->dev, NULL);
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 358f0ba..31af405 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -505,7 +505,7 @@
return 0;
error_sound:
- platform_device_unregister(sound_device);
+ platform_device_put(sound_device);
error:
kfree(machine_data);
error_alloc:
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index fcb862e..2c064a9 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -267,7 +267,7 @@
if (bus < 0)
return bus;
- snprintf(buf, len, "%s-codec.%u-%04x", temp, bus, addr);
+ snprintf(buf, len, "%s.%u-%04x", temp, bus, addr);
return 0;
}
@@ -506,7 +506,7 @@
error:
if (sound_device)
- platform_device_unregister(sound_device);
+ platform_device_put(sound_device);
kfree(mdata);
error_put:
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index bb699bb..b133bfc 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -29,7 +29,7 @@
config SND_SOC_MX27VIS_AIC32X4
tristate "SoC audio support for Visstrim M10 boards"
depends on MACH_IMX27_VISSTRIM_M10
- select SND_SOC_TVL320AIC32X4
+ select SND_SOC_TLV320AIC32X4
select SND_MXC_SOC_MX2
help
Say Y if you want to add support for SoC audio on Visstrim SM10
@@ -50,6 +50,7 @@
|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
|| MACH_EUKREA_MBIMXSD51_BASEBOARD
+ depends on I2C
select SND_SOC_TLV320AIC23
select SND_MXC_SOC_FIQ
help
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c
index 7945625..8df0fae2 100644
--- a/sound/soc/imx/imx-pcm-fiq.c
+++ b/sound/soc/imx/imx-pcm-fiq.c
@@ -240,25 +240,23 @@
static int imx_pcm_fiq_new(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_soc_dai *dai = rtd->cpu_dai;
struct snd_pcm *pcm = rtd->pcm;
+ struct snd_pcm_substream *substream;
int ret;
ret = imx_pcm_new(rtd);
if (ret)
return ret;
- if (dai->driver->playback.channels_min) {
- struct snd_pcm_substream *substream =
- pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+ substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+ if (substream) {
struct snd_dma_buffer *buf = &substream->dma_buffer;
imx_ssi_fiq_tx_buffer = (unsigned long)buf->area;
}
- if (dai->driver->capture.channels_min) {
- struct snd_pcm_substream *substream =
- pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+ substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+ if (substream) {
struct snd_dma_buffer *buf = &substream->dma_buffer;
imx_ssi_fiq_rx_buffer = (unsigned long)buf->area;
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index 10a8e27..4c05e2b 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -357,8 +357,8 @@
struct snd_pcm_runtime *runtime = substream->runtime;
int ret;
- ret = dma_mmap_coherent(NULL, vma, runtime->dma_area,
- runtime->dma_addr, runtime->dma_bytes);
+ ret = dma_mmap_writecombine(substream->pcm->card->dev, vma,
+ runtime->dma_area, runtime->dma_addr, runtime->dma_bytes);
pr_debug("%s: ret: %d %p 0x%08x 0x%08x\n", __func__, ret,
runtime->dma_area,
@@ -391,7 +391,6 @@
int imx_pcm_new(struct snd_soc_pcm_runtime *rtd)
{
struct snd_card *card = rtd->card->snd_card;
- struct snd_soc_dai *dai = rtd->cpu_dai;
struct snd_pcm *pcm = rtd->pcm;
int ret = 0;
@@ -399,14 +398,14 @@
card->dev->dma_mask = &imx_pcm_dmamask;
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
- if (dai->driver->playback.channels_min) {
+ if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
ret = imx_pcm_preallocate_dma_buffer(pcm,
SNDRV_PCM_STREAM_PLAYBACK);
if (ret)
goto out;
}
- if (dai->driver->capture.channels_min) {
+ if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
ret = imx_pcm_preallocate_dma_buffer(pcm,
SNDRV_PCM_STREAM_CAPTURE);
if (ret)
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index 0a84cec..1072dfb 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -218,12 +218,6 @@
struct platform_device *soc_platform_pdev_fiq;
};
-struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev,
- struct imx_ssi *ssi);
-void imx_ssi_fiq_exit(struct platform_device *pdev, struct imx_ssi *ssi);
-struct snd_soc_platform *imx_ssi_dma_mx2_init(struct platform_device *pdev,
- struct imx_ssi *ssi);
-
int snd_imx_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma);
int imx_pcm_new(struct snd_soc_pcm_runtime *rtd);
void imx_pcm_free(struct snd_pcm *pcm);
diff --git a/sound/soc/jz4740/jz4740-pcm.c b/sound/soc/jz4740/jz4740-pcm.c
index a7c9578..d1989cd 100644
--- a/sound/soc/jz4740/jz4740-pcm.c
+++ b/sound/soc/jz4740/jz4740-pcm.c
@@ -299,7 +299,7 @@
static u64 jz4740_pcm_dmamask = DMA_BIT_MASK(32);
-int jz4740_pcm_new(struct snd_soc_pcm_runtime *rtd)
+static int jz4740_pcm_new(struct snd_soc_pcm_runtime *rtd)
{
struct snd_card *card = rtd->card->snd_card;
struct snd_soc_dai *dai = rtd->cpu_dai;
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index d0bcf3f..715e841 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -476,7 +476,7 @@
static struct platform_driver kirkwood_i2s_driver = {
.probe = kirkwood_i2s_dev_probe,
- .remove = kirkwood_i2s_dev_remove,
+ .remove = __devexit_p(kirkwood_i2s_dev_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/sound/soc/kirkwood/kirkwood-t5325.c b/sound/soc/kirkwood/kirkwood-t5325.c
index c8d2195..c772b3c 100644
--- a/sound/soc/kirkwood/kirkwood-t5325.c
+++ b/sound/soc/kirkwood/kirkwood-t5325.c
@@ -79,8 +79,6 @@
snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
snd_soc_dapm_enable_pin(dapm, "Speaker");
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/mid-x86/mfld_machine.c b/sound/soc/mid-x86/mfld_machine.c
index 429aa1b..598f48c 100644
--- a/sound/soc/mid-x86/mfld_machine.c
+++ b/sound/soc/mid-x86/mfld_machine.c
@@ -54,9 +54,7 @@
static unsigned int lo_dac;
struct mfld_mc_private {
- struct platform_device *socdev;
void __iomem *int_base;
- struct snd_soc_codec *codec;
u8 interrupt_status;
};
@@ -235,7 +233,6 @@
/* always connected */
snd_soc_dapm_enable_pin(dapm, "Headphones");
snd_soc_dapm_enable_pin(dapm, "Mic");
- snd_soc_dapm_sync(dapm);
ret_val = snd_soc_add_controls(codec, mfld_snd_controls,
ARRAY_SIZE(mfld_snd_controls));
@@ -253,7 +250,6 @@
/* we dont use linein in this so set to NC */
snd_soc_dapm_disable_pin(dapm, "LINEINL");
snd_soc_dapm_disable_pin(dapm, "LINEINR");
- snd_soc_dapm_sync(dapm);
/* Headset and button jack detection */
ret_val = snd_soc_jack_new(codec, "Intel(R) MID Audio Jack",
diff --git a/sound/soc/mid-x86/sst_platform.c b/sound/soc/mid-x86/sst_platform.c
index 3e78260..7df8c58 100644
--- a/sound/soc/mid-x86/sst_platform.c
+++ b/sound/soc/mid-x86/sst_platform.c
@@ -63,7 +63,7 @@
};
/* MFLD - MSIC */
-struct snd_soc_dai_driver sst_platform_dai[] = {
+static struct snd_soc_dai_driver sst_platform_dai[] = {
{
.name = "Headset-cpu-dai",
.id = 0,
@@ -226,13 +226,18 @@
static int sst_platform_open(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime;
+ struct snd_pcm_runtime *runtime = substream->runtime;
struct sst_runtime_stream *stream;
int ret_val = 0;
pr_debug("sst_platform_open called\n");
- runtime = substream->runtime;
- runtime->hw = sst_platform_pcm_hw;
+
+ snd_soc_set_runtime_hwparams(substream, &sst_platform_pcm_hw);
+ ret_val = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret_val < 0)
+ return ret_val;
+
stream = kzalloc(sizeof(*stream), GFP_KERNEL);
if (!stream)
return -ENOMEM;
@@ -259,8 +264,8 @@
return ret_val;
}
runtime->private_data = stream;
- return snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
+
+ return 0;
}
static int sst_platform_close(struct snd_pcm_substream *substream)
@@ -469,7 +474,7 @@
static int __init sst_soc_platform_init(void)
{
pr_debug("sst_soc_platform_init called\n");
- return platform_driver_register(&sst_platform_driver);
+ return platform_driver_register(&sst_platform_driver);
}
module_init(sst_soc_platform_init);
diff --git a/sound/soc/mxs/Kconfig b/sound/soc/mxs/Kconfig
new file mode 100644
index 0000000..e4ba8d5
--- /dev/null
+++ b/sound/soc/mxs/Kconfig
@@ -0,0 +1,20 @@
+menuconfig SND_MXS_SOC
+ tristate "SoC Audio for Freescale MXS CPUs"
+ depends on ARCH_MXS
+ select SND_PCM
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the MXS SAIF interface.
+
+
+if SND_MXS_SOC
+
+config SND_SOC_MXS_SGTL5000
+ tristate "SoC Audio support for i.MX boards with sgtl5000"
+ depends on I2C
+ select SND_SOC_SGTL5000
+ help
+ Say Y if you want to add support for SoC audio on an MXS board with
+ a sgtl5000 codec.
+
+endif # SND_MXS_SOC
diff --git a/sound/soc/mxs/Makefile b/sound/soc/mxs/Makefile
new file mode 100644
index 0000000..565b5b5
--- /dev/null
+++ b/sound/soc/mxs/Makefile
@@ -0,0 +1,10 @@
+# MXS Platform Support
+snd-soc-mxs-objs := mxs-saif.o
+snd-soc-mxs-pcm-objs := mxs-pcm.o
+
+obj-$(CONFIG_SND_MXS_SOC) += snd-soc-mxs.o snd-soc-mxs-pcm.o
+
+# i.MX Machine Support
+snd-soc-mxs-sgtl5000-objs := mxs-sgtl5000.o
+
+obj-$(CONFIG_SND_SOC_MXS_SGTL5000) += snd-soc-mxs-sgtl5000.o
diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c
new file mode 100644
index 0000000..dea5aa4
--- /dev/null
+++ b/sound/soc/mxs/mxs-pcm.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Based on sound/soc/imx/imx-pcm-dma-mx2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/dma.h>
+#include "mxs-pcm.h"
+
+static struct snd_pcm_hardware snd_mxs_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_INTERLEAVED,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 2,
+ .channels_max = 2,
+ .period_bytes_min = 32,
+ .period_bytes_max = 8192,
+ .periods_min = 1,
+ .periods_max = 52,
+ .buffer_bytes_max = 64 * 1024,
+ .fifo_size = 32,
+
+};
+
+static void audio_dma_irq(void *data)
+{
+ struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd = runtime->private_data;
+
+ iprtd->offset += iprtd->period_bytes;
+ iprtd->offset %= iprtd->period_bytes * iprtd->periods;
+ snd_pcm_period_elapsed(substream);
+}
+
+static bool filter(struct dma_chan *chan, void *param)
+{
+ struct mxs_pcm_runtime_data *iprtd = param;
+ struct mxs_pcm_dma_params *dma_params = iprtd->dma_params;
+
+ if (!mxs_dma_is_apbx(chan))
+ return false;
+
+ if (chan->chan_id != dma_params->chan_num)
+ return false;
+
+ chan->private = &iprtd->dma_data;
+
+ return true;
+}
+
+static int mxs_dma_alloc(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd = runtime->private_data;
+ dma_cap_mask_t mask;
+
+ iprtd->dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ iprtd->dma_data.chan_irq = iprtd->dma_params->chan_irq;
+ iprtd->dma_chan = dma_request_channel(mask, filter, iprtd);
+ if (!iprtd->dma_chan)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int snd_mxs_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd = runtime->private_data;
+ unsigned long dma_addr;
+ struct dma_chan *chan;
+ int ret;
+
+ ret = mxs_dma_alloc(substream, params);
+ if (ret)
+ return ret;
+ chan = iprtd->dma_chan;
+
+ iprtd->size = params_buffer_bytes(params);
+ iprtd->periods = params_periods(params);
+ iprtd->period_bytes = params_period_bytes(params);
+ iprtd->offset = 0;
+ iprtd->period_time = HZ / (params_rate(params) /
+ params_period_size(params));
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+ dma_addr = runtime->dma_addr;
+
+ iprtd->buf = substream->dma_buffer.area;
+
+ iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr,
+ iprtd->period_bytes * iprtd->periods,
+ iprtd->period_bytes,
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ if (!iprtd->desc) {
+ dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+ return -EINVAL;
+ }
+
+ iprtd->desc->callback = audio_dma_irq;
+ iprtd->desc->callback_param = substream;
+
+ return 0;
+}
+
+static int snd_mxs_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd = runtime->private_data;
+
+ if (iprtd->dma_chan) {
+ dma_release_channel(iprtd->dma_chan);
+ iprtd->dma_chan = NULL;
+ }
+
+ return 0;
+}
+
+static int snd_mxs_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd = runtime->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ dmaengine_submit(iprtd->desc);
+
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ dmaengine_terminate_all(iprtd->dma_chan);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t snd_mxs_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd = runtime->private_data;
+
+ return bytes_to_frames(substream->runtime, iprtd->offset);
+}
+
+static int snd_mxs_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd;
+ int ret;
+
+ iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
+ if (iprtd == NULL)
+ return -ENOMEM;
+ runtime->private_data = iprtd;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0) {
+ kfree(iprtd);
+ return ret;
+ }
+
+ snd_soc_set_runtime_hwparams(substream, &snd_mxs_hardware);
+
+ return 0;
+}
+
+static int snd_mxs_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mxs_pcm_runtime_data *iprtd = runtime->private_data;
+
+ kfree(iprtd);
+
+ return 0;
+}
+
+static int snd_mxs_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+ runtime->dma_area,
+ runtime->dma_addr,
+ runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops mxs_pcm_ops = {
+ .open = snd_mxs_open,
+ .close = snd_mxs_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_mxs_pcm_hw_params,
+ .hw_free = snd_mxs_pcm_hw_free,
+ .trigger = snd_mxs_pcm_trigger,
+ .pointer = snd_mxs_pcm_pointer,
+ .mmap = snd_mxs_pcm_mmap,
+};
+
+static int mxs_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = snd_mxs_hardware.buffer_bytes_max;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ if (!buf->area)
+ return -ENOMEM;
+ buf->bytes = size;
+
+ return 0;
+}
+
+static u64 mxs_pcm_dmamask = DMA_BIT_MASK(32);
+static int mxs_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_card *card = rtd->card->snd_card;
+ struct snd_pcm *pcm = rtd->pcm;
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &mxs_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+ if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+ ret = mxs_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+ ret = mxs_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void mxs_pcm_free(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+
+ dma_free_writecombine(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+static struct snd_soc_platform_driver mxs_soc_platform = {
+ .ops = &mxs_pcm_ops,
+ .pcm_new = mxs_pcm_new,
+ .pcm_free = mxs_pcm_free,
+};
+
+static int __devinit mxs_soc_platform_probe(struct platform_device *pdev)
+{
+ return snd_soc_register_platform(&pdev->dev, &mxs_soc_platform);
+}
+
+static int __devexit mxs_soc_platform_remove(struct platform_device *pdev)
+{
+ snd_soc_unregister_platform(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver mxs_pcm_driver = {
+ .driver = {
+ .name = "mxs-pcm-audio",
+ .owner = THIS_MODULE,
+ },
+ .probe = mxs_soc_platform_probe,
+ .remove = __devexit_p(mxs_soc_platform_remove),
+};
+
+static int __init snd_mxs_pcm_init(void)
+{
+ return platform_driver_register(&mxs_pcm_driver);
+}
+module_init(snd_mxs_pcm_init);
+
+static void __exit snd_mxs_pcm_exit(void)
+{
+ platform_driver_unregister(&mxs_pcm_driver);
+}
+module_exit(snd_mxs_pcm_exit);
diff --git a/sound/soc/mxs/mxs-pcm.h b/sound/soc/mxs/mxs-pcm.h
new file mode 100644
index 0000000..f55ac4f
--- /dev/null
+++ b/sound/soc/mxs/mxs-pcm.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _MXS_PCM_H
+#define _MXS_PCM_H
+
+#include <mach/dma.h>
+
+struct mxs_pcm_dma_params {
+ int chan_irq;
+ int chan_num;
+};
+
+struct mxs_pcm_runtime_data {
+ int period_bytes;
+ int periods;
+ int dma;
+ unsigned long offset;
+ unsigned long size;
+ void *buf;
+ int period_time;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *dma_chan;
+ struct mxs_dma_data dma_data;
+ struct mxs_pcm_dma_params *dma_params;
+};
+
+#endif
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
new file mode 100644
index 0000000..76dc74d
--- /dev/null
+++ b/sound/soc/mxs/mxs-saif.c
@@ -0,0 +1,798 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/saif.h>
+#include <mach/dma.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/mxs.h>
+
+#include "mxs-saif.h"
+
+static struct mxs_saif *mxs_saif[2];
+
+/*
+ * SAIF is a little different with other normal SOC DAIs on clock using.
+ *
+ * For MXS, two SAIF modules are instantiated on-chip.
+ * Each SAIF has a set of clock pins and can be operating in master
+ * mode simultaneously if they are connected to different off-chip codecs.
+ * Also, one of the two SAIFs can master or drive the clock pins while the
+ * other SAIF, in slave mode, receives clocking from the master SAIF.
+ * This also means that both SAIFs must operate at the same sample rate.
+ *
+ * We abstract this as each saif has a master, the master could be
+ * himself or other saifs. In the generic saif driver, saif does not need
+ * to know the different clkmux. Saif only needs to know who is his master
+ * and operating his master to generate the proper clock rate for him.
+ * The master id is provided in mach-specific layer according to different
+ * clkmux setting.
+ */
+
+static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+
+ switch (clk_id) {
+ case MXS_SAIF_MCLK:
+ saif->mclk = freq;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK
+ * is provided by other SAIF, we provide a interface here to get its master
+ * from its master_id.
+ * Note that the master could be himself.
+ */
+static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif)
+{
+ return mxs_saif[saif->master_id];
+}
+
+/*
+ * Set SAIF clock and MCLK
+ */
+static int mxs_saif_set_clk(struct mxs_saif *saif,
+ unsigned int mclk,
+ unsigned int rate)
+{
+ u32 scr;
+ int ret;
+ struct mxs_saif *master_saif;
+
+ dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate);
+
+ /* Set master saif to generate proper clock */
+ master_saif = mxs_saif_get_master(saif);
+ if (!master_saif)
+ return -EINVAL;
+
+ dev_dbg(saif->dev, "master saif%d\n", master_saif->id);
+
+ /* Checking if can playback and capture simutaneously */
+ if (master_saif->ongoing && rate != master_saif->cur_rate) {
+ dev_err(saif->dev,
+ "can not change clock, master saif%d(rate %d) is ongoing\n",
+ master_saif->id, master_saif->cur_rate);
+ return -EINVAL;
+ }
+
+ scr = __raw_readl(master_saif->base + SAIF_CTRL);
+ scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE;
+ scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
+
+ /*
+ * Set SAIF clock
+ *
+ * The SAIF clock should be either 384*fs or 512*fs.
+ * If MCLK is used, the SAIF clk ratio need to match mclk ratio.
+ * For 32x mclk, set saif clk as 512*fs.
+ * For 48x mclk, set saif clk as 384*fs.
+ *
+ * If MCLK is not used, we just set saif clk to 512*fs.
+ */
+ if (master_saif->mclk_in_use) {
+ if (mclk % 32 == 0) {
+ scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
+ ret = clk_set_rate(master_saif->clk, 512 * rate);
+ } else if (mclk % 48 == 0) {
+ scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
+ ret = clk_set_rate(master_saif->clk, 384 * rate);
+ } else {
+ /* SAIF MCLK should be either 32x or 48x */
+ return -EINVAL;
+ }
+ } else {
+ ret = clk_set_rate(master_saif->clk, 512 * rate);
+ scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
+ }
+
+ if (ret)
+ return ret;
+
+ master_saif->cur_rate = rate;
+
+ if (!master_saif->mclk_in_use) {
+ __raw_writel(scr, master_saif->base + SAIF_CTRL);
+ return 0;
+ }
+
+ /*
+ * Program the over-sample rate for MCLK output
+ *
+ * The available MCLK range is 32x, 48x... 512x. The rate
+ * could be from 8kHz to 192kH.
+ */
+ switch (mclk / rate) {
+ case 32:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4);
+ break;
+ case 64:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
+ break;
+ case 128:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
+ break;
+ case 256:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
+ break;
+ case 512:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
+ break;
+ case 48:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
+ break;
+ case 96:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
+ break;
+ case 192:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
+ break;
+ case 384:
+ scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ __raw_writel(scr, master_saif->base + SAIF_CTRL);
+
+ return 0;
+}
+
+/*
+ * Put and disable MCLK.
+ */
+int mxs_saif_put_mclk(unsigned int saif_id)
+{
+ struct mxs_saif *saif = mxs_saif[saif_id];
+ u32 stat;
+
+ if (!saif)
+ return -EINVAL;
+
+ stat = __raw_readl(saif->base + SAIF_STAT);
+ if (stat & BM_SAIF_STAT_BUSY) {
+ dev_err(saif->dev, "error: busy\n");
+ return -EBUSY;
+ }
+
+ clk_disable(saif->clk);
+
+ /* disable MCLK output */
+ __raw_writel(BM_SAIF_CTRL_CLKGATE,
+ saif->base + SAIF_CTRL + MXS_SET_ADDR);
+ __raw_writel(BM_SAIF_CTRL_RUN,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+
+ saif->mclk_in_use = 0;
+ return 0;
+}
+
+/*
+ * Get MCLK and set clock rate, then enable it
+ *
+ * This interface is used for codecs who are using MCLK provided
+ * by saif.
+ */
+int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
+ unsigned int rate)
+{
+ struct mxs_saif *saif = mxs_saif[saif_id];
+ u32 stat;
+ int ret;
+ struct mxs_saif *master_saif;
+
+ if (!saif)
+ return -EINVAL;
+
+ /* Clear Reset */
+ __raw_writel(BM_SAIF_CTRL_SFTRST,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+
+ /* FIXME: need clear clk gate for register r/w */
+ __raw_writel(BM_SAIF_CTRL_CLKGATE,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+
+ master_saif = mxs_saif_get_master(saif);
+ if (saif != master_saif) {
+ dev_err(saif->dev, "can not get mclk from a non-master saif\n");
+ return -EINVAL;
+ }
+
+ stat = __raw_readl(saif->base + SAIF_STAT);
+ if (stat & BM_SAIF_STAT_BUSY) {
+ dev_err(saif->dev, "error: busy\n");
+ return -EBUSY;
+ }
+
+ saif->mclk_in_use = 1;
+ ret = mxs_saif_set_clk(saif, mclk, rate);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(saif->clk);
+ if (ret)
+ return ret;
+
+ /* enable MCLK output */
+ __raw_writel(BM_SAIF_CTRL_RUN,
+ saif->base + SAIF_CTRL + MXS_SET_ADDR);
+
+ return 0;
+}
+
+/*
+ * SAIF DAI format configuration.
+ * Should only be called when port is inactive.
+ */
+static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
+{
+ u32 scr, stat;
+ u32 scr0;
+ struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+
+ stat = __raw_readl(saif->base + SAIF_STAT);
+ if (stat & BM_SAIF_STAT_BUSY) {
+ dev_err(cpu_dai->dev, "error: busy\n");
+ return -EBUSY;
+ }
+
+ scr0 = __raw_readl(saif->base + SAIF_CTRL);
+ scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \
+ & ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY;
+ scr = 0;
+
+ /* DAI mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ /* data frame low 1clk before data */
+ scr |= BM_SAIF_CTRL_DELAY;
+ scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ /* data frame high with data */
+ scr &= ~BM_SAIF_CTRL_DELAY;
+ scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
+ scr &= ~BM_SAIF_CTRL_JUSTIFY;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* DAI clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ scr |= BM_SAIF_CTRL_BITCLK_EDGE;
+ scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ scr |= BM_SAIF_CTRL_BITCLK_EDGE;
+ scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
+ scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
+ scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
+ break;
+ }
+
+ /*
+ * Note: We simply just support master mode since SAIF TX can only
+ * work as master.
+ * Here the master is relative to codec side.
+ * Saif internally could be slave when working on EXTMASTER mode.
+ * We just hide this to machine driver.
+ */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ if (saif->id == saif->master_id)
+ scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
+ else
+ scr |= BM_SAIF_CTRL_SLAVE_MODE;
+
+ __raw_writel(scr | scr0, saif->base + SAIF_CTRL);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mxs_saif_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+ snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param);
+
+ /* clear error status to 0 for each re-open */
+ saif->fifo_underrun = 0;
+ saif->fifo_overrun = 0;
+
+ /* Clear Reset for normal operations */
+ __raw_writel(BM_SAIF_CTRL_SFTRST,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+
+ /* clear clock gate */
+ __raw_writel(BM_SAIF_CTRL_CLKGATE,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+
+ return 0;
+}
+
+/*
+ * Should only be called when port is inactive.
+ * although can be called multiple times by upper layers.
+ */
+static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+ u32 scr, stat;
+ int ret;
+
+ /* mclk should already be set */
+ if (!saif->mclk && saif->mclk_in_use) {
+ dev_err(cpu_dai->dev, "set mclk first\n");
+ return -EINVAL;
+ }
+
+ stat = __raw_readl(saif->base + SAIF_STAT);
+ if (stat & BM_SAIF_STAT_BUSY) {
+ dev_err(cpu_dai->dev, "error: busy\n");
+ return -EBUSY;
+ }
+
+ /*
+ * Set saif clk based on sample rate.
+ * If mclk is used, we also set mclk, if not, saif->mclk is
+ * default 0, means not used.
+ */
+ ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params));
+ if (ret) {
+ dev_err(cpu_dai->dev, "unable to get proper clk\n");
+ return ret;
+ }
+
+ scr = __raw_readl(saif->base + SAIF_CTRL);
+
+ scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
+ scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ scr |= BF_SAIF_CTRL_WORD_LENGTH(0);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ scr |= BF_SAIF_CTRL_WORD_LENGTH(4);
+ scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ scr |= BF_SAIF_CTRL_WORD_LENGTH(8);
+ scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Tx/Rx config */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* enable TX mode */
+ scr &= ~BM_SAIF_CTRL_READ_MODE;
+ } else {
+ /* enable RX mode */
+ scr |= BM_SAIF_CTRL_READ_MODE;
+ }
+
+ __raw_writel(scr, saif->base + SAIF_CTRL);
+ return 0;
+}
+
+static int mxs_saif_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+
+ /* enable FIFO error irqs */
+ __raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN,
+ saif->base + SAIF_CTRL + MXS_SET_ADDR);
+
+ return 0;
+}
+
+static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+ struct mxs_saif *master_saif;
+ u32 delay;
+
+ master_saif = mxs_saif_get_master(saif);
+ if (!master_saif)
+ return -EINVAL;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ dev_dbg(cpu_dai->dev, "start\n");
+
+ clk_enable(master_saif->clk);
+ if (!master_saif->mclk_in_use)
+ __raw_writel(BM_SAIF_CTRL_RUN,
+ master_saif->base + SAIF_CTRL + MXS_SET_ADDR);
+
+ /*
+ * If the saif's master is not himself, we also need to enable
+ * itself clk for its internal basic logic to work.
+ */
+ if (saif != master_saif) {
+ clk_enable(saif->clk);
+ __raw_writel(BM_SAIF_CTRL_RUN,
+ saif->base + SAIF_CTRL + MXS_SET_ADDR);
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /*
+ * write a data to saif data register to trigger
+ * the transfer
+ */
+ __raw_writel(0, saif->base + SAIF_DATA);
+ } else {
+ /*
+ * read a data from saif data register to trigger
+ * the receive
+ */
+ __raw_readl(saif->base + SAIF_DATA);
+ }
+
+ master_saif->ongoing = 1;
+
+ dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n",
+ __raw_readl(saif->base + SAIF_CTRL),
+ __raw_readl(saif->base + SAIF_STAT));
+
+ dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n",
+ __raw_readl(master_saif->base + SAIF_CTRL),
+ __raw_readl(master_saif->base + SAIF_STAT));
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ dev_dbg(cpu_dai->dev, "stop\n");
+
+ /* wait a while for the current sample to complete */
+ delay = USEC_PER_SEC / master_saif->cur_rate;
+
+ if (!master_saif->mclk_in_use) {
+ __raw_writel(BM_SAIF_CTRL_RUN,
+ master_saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+ udelay(delay);
+ }
+ clk_disable(master_saif->clk);
+
+ if (saif != master_saif) {
+ __raw_writel(BM_SAIF_CTRL_RUN,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+ udelay(delay);
+ clk_disable(saif->clk);
+ }
+
+ master_saif->ongoing = 0;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000
+#define MXS_SAIF_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops mxs_saif_dai_ops = {
+ .startup = mxs_saif_startup,
+ .trigger = mxs_saif_trigger,
+ .prepare = mxs_saif_prepare,
+ .hw_params = mxs_saif_hw_params,
+ .set_sysclk = mxs_saif_set_dai_sysclk,
+ .set_fmt = mxs_saif_set_dai_fmt,
+};
+
+static int mxs_saif_dai_probe(struct snd_soc_dai *dai)
+{
+ struct mxs_saif *saif = dev_get_drvdata(dai->dev);
+
+ snd_soc_dai_set_drvdata(dai, saif);
+
+ return 0;
+}
+
+static struct snd_soc_dai_driver mxs_saif_dai = {
+ .name = "mxs-saif",
+ .probe = mxs_saif_dai_probe,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = MXS_SAIF_RATES,
+ .formats = MXS_SAIF_FORMATS,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = MXS_SAIF_RATES,
+ .formats = MXS_SAIF_FORMATS,
+ },
+ .ops = &mxs_saif_dai_ops,
+};
+
+static irqreturn_t mxs_saif_irq(int irq, void *dev_id)
+{
+ struct mxs_saif *saif = dev_id;
+ unsigned int stat;
+
+ stat = __raw_readl(saif->base + SAIF_STAT);
+ if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ |
+ BM_SAIF_STAT_FIFO_OVERFLOW_IRQ)))
+ return IRQ_NONE;
+
+ if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) {
+ dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun);
+ __raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ,
+ saif->base + SAIF_STAT + MXS_CLR_ADDR);
+ }
+
+ if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) {
+ dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun);
+ __raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ,
+ saif->base + SAIF_STAT + MXS_CLR_ADDR);
+ }
+
+ dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n",
+ __raw_readl(saif->base + SAIF_CTRL),
+ __raw_readl(saif->base + SAIF_STAT));
+
+ return IRQ_HANDLED;
+}
+
+static int mxs_saif_probe(struct platform_device *pdev)
+{
+ struct resource *iores, *dmares;
+ struct mxs_saif *saif;
+ struct mxs_saif_platform_data *pdata;
+ int ret = 0;
+
+ if (pdev->id >= ARRAY_SIZE(mxs_saif))
+ return -EINVAL;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->init) {
+ ret = pdata->init();
+ if (ret)
+ return ret;
+ }
+
+ saif = kzalloc(sizeof(*saif), GFP_KERNEL);
+ if (!saif)
+ return -ENOMEM;
+
+ mxs_saif[pdev->id] = saif;
+ saif->id = pdev->id;
+
+ saif->master_id = saif->id;
+ if (pdata && pdata->get_master_id) {
+ saif->master_id = pdata->get_master_id(saif->id);
+ if (saif->master_id < 0 ||
+ saif->master_id >= ARRAY_SIZE(mxs_saif))
+ return -EINVAL;
+ }
+
+ saif->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(saif->clk)) {
+ ret = PTR_ERR(saif->clk);
+ dev_err(&pdev->dev, "Cannot get the clock: %d\n",
+ ret);
+ goto failed_clk;
+ }
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "failed to get io resource: %d\n",
+ ret);
+ goto failed_get_resource;
+ }
+
+ if (!request_mem_region(iores->start, resource_size(iores),
+ "mxs-saif")) {
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ ret = -EBUSY;
+ goto failed_get_resource;
+ }
+
+ saif->base = ioremap(iores->start, resource_size(iores));
+ if (!saif->base) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENODEV;
+ goto failed_ioremap;
+ }
+
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmares) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "failed to get dma resource: %d\n",
+ ret);
+ goto failed_ioremap;
+ }
+ saif->dma_param.chan_num = dmares->start;
+
+ saif->irq = platform_get_irq(pdev, 0);
+ if (saif->irq < 0) {
+ ret = saif->irq;
+ dev_err(&pdev->dev, "failed to get irq resource: %d\n",
+ ret);
+ goto failed_get_irq1;
+ }
+
+ saif->dev = &pdev->dev;
+ ret = request_irq(saif->irq, mxs_saif_irq, 0, "mxs-saif", saif);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request irq\n");
+ goto failed_get_irq1;
+ }
+
+ saif->dma_param.chan_irq = platform_get_irq(pdev, 1);
+ if (saif->dma_param.chan_irq < 0) {
+ ret = saif->dma_param.chan_irq;
+ dev_err(&pdev->dev, "failed to get dma irq resource: %d\n",
+ ret);
+ goto failed_get_irq2;
+ }
+
+ platform_set_drvdata(pdev, saif);
+
+ ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai);
+ if (ret) {
+ dev_err(&pdev->dev, "register DAI failed\n");
+ goto failed_register;
+ }
+
+ saif->soc_platform_pdev = platform_device_alloc(
+ "mxs-pcm-audio", pdev->id);
+ if (!saif->soc_platform_pdev) {
+ ret = -ENOMEM;
+ goto failed_pdev_alloc;
+ }
+
+ platform_set_drvdata(saif->soc_platform_pdev, saif);
+ ret = platform_device_add(saif->soc_platform_pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add soc platform device\n");
+ goto failed_pdev_add;
+ }
+
+ return 0;
+
+failed_pdev_add:
+ platform_device_put(saif->soc_platform_pdev);
+failed_pdev_alloc:
+ snd_soc_unregister_dai(&pdev->dev);
+failed_register:
+failed_get_irq2:
+ free_irq(saif->irq, saif);
+failed_get_irq1:
+ iounmap(saif->base);
+failed_ioremap:
+ release_mem_region(iores->start, resource_size(iores));
+failed_get_resource:
+ clk_put(saif->clk);
+failed_clk:
+ kfree(saif);
+
+ return ret;
+}
+
+static int __devexit mxs_saif_remove(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct mxs_saif *saif = platform_get_drvdata(pdev);
+
+ platform_device_unregister(saif->soc_platform_pdev);
+
+ snd_soc_unregister_dai(&pdev->dev);
+
+ iounmap(saif->base);
+ release_mem_region(res->start, resource_size(res));
+ free_irq(saif->irq, saif);
+
+ clk_put(saif->clk);
+ kfree(saif);
+
+ return 0;
+}
+
+static struct platform_driver mxs_saif_driver = {
+ .probe = mxs_saif_probe,
+ .remove = __devexit_p(mxs_saif_remove),
+
+ .driver = {
+ .name = "mxs-saif",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mxs_saif_init(void)
+{
+ return platform_driver_register(&mxs_saif_driver);
+}
+
+static void __exit mxs_saif_exit(void)
+{
+ platform_driver_unregister(&mxs_saif_driver);
+}
+
+module_init(mxs_saif_init);
+module_exit(mxs_saif_exit);
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MXS ASoC SAIF driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/mxs/mxs-saif.h b/sound/soc/mxs/mxs-saif.h
new file mode 100644
index 0000000..12c91e4
--- /dev/null
+++ b/sound/soc/mxs/mxs-saif.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+
+#ifndef _MXS_SAIF_H
+#define _MXS_SAIF_H
+
+#define SAIF_CTRL 0x0
+#define SAIF_STAT 0x10
+#define SAIF_DATA 0x20
+#define SAIF_VERSION 0X30
+
+/* SAIF_CTRL */
+#define BM_SAIF_CTRL_SFTRST 0x80000000
+#define BM_SAIF_CTRL_CLKGATE 0x40000000
+#define BP_SAIF_CTRL_BITCLK_MULT_RATE 27
+#define BM_SAIF_CTRL_BITCLK_MULT_RATE 0x38000000
+#define BF_SAIF_CTRL_BITCLK_MULT_RATE(v) \
+ (((v) << 27) & BM_SAIF_CTRL_BITCLK_MULT_RATE)
+#define BM_SAIF_CTRL_BITCLK_BASE_RATE 0x04000000
+#define BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN 0x02000000
+#define BM_SAIF_CTRL_FIFO_SERVICE_IRQ_EN 0x01000000
+#define BP_SAIF_CTRL_RSRVD2 21
+#define BM_SAIF_CTRL_RSRVD2 0x00E00000
+
+#define BP_SAIF_CTRL_DMAWAIT_COUNT 16
+#define BM_SAIF_CTRL_DMAWAIT_COUNT 0x001F0000
+#define BF_SAIF_CTRL_DMAWAIT_COUNT(v) \
+ (((v) << 16) & BM_SAIF_CTRL_DMAWAIT_COUNT)
+#define BP_SAIF_CTRL_CHANNEL_NUM_SELECT 14
+#define BM_SAIF_CTRL_CHANNEL_NUM_SELECT 0x0000C000
+#define BF_SAIF_CTRL_CHANNEL_NUM_SELECT(v) \
+ (((v) << 14) & BM_SAIF_CTRL_CHANNEL_NUM_SELECT)
+#define BM_SAIF_CTRL_LRCLK_PULSE 0x00002000
+#define BM_SAIF_CTRL_BIT_ORDER 0x00001000
+#define BM_SAIF_CTRL_DELAY 0x00000800
+#define BM_SAIF_CTRL_JUSTIFY 0x00000400
+#define BM_SAIF_CTRL_LRCLK_POLARITY 0x00000200
+#define BM_SAIF_CTRL_BITCLK_EDGE 0x00000100
+#define BP_SAIF_CTRL_WORD_LENGTH 4
+#define BM_SAIF_CTRL_WORD_LENGTH 0x000000F0
+#define BF_SAIF_CTRL_WORD_LENGTH(v) \
+ (((v) << 4) & BM_SAIF_CTRL_WORD_LENGTH)
+#define BM_SAIF_CTRL_BITCLK_48XFS_ENABLE 0x00000008
+#define BM_SAIF_CTRL_SLAVE_MODE 0x00000004
+#define BM_SAIF_CTRL_READ_MODE 0x00000002
+#define BM_SAIF_CTRL_RUN 0x00000001
+
+/* SAIF_STAT */
+#define BM_SAIF_STAT_PRESENT 0x80000000
+#define BP_SAIF_STAT_RSRVD2 17
+#define BM_SAIF_STAT_RSRVD2 0x7FFE0000
+#define BF_SAIF_STAT_RSRVD2(v) \
+ (((v) << 17) & BM_SAIF_STAT_RSRVD2)
+#define BM_SAIF_STAT_DMA_PREQ 0x00010000
+#define BP_SAIF_STAT_RSRVD1 7
+#define BM_SAIF_STAT_RSRVD1 0x0000FF80
+#define BF_SAIF_STAT_RSRVD1(v) \
+ (((v) << 7) & BM_SAIF_STAT_RSRVD1)
+
+#define BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ 0x00000040
+#define BM_SAIF_STAT_FIFO_OVERFLOW_IRQ 0x00000020
+#define BM_SAIF_STAT_FIFO_SERVICE_IRQ 0x00000010
+#define BP_SAIF_STAT_RSRVD0 1
+#define BM_SAIF_STAT_RSRVD0 0x0000000E
+#define BF_SAIF_STAT_RSRVD0(v) \
+ (((v) << 1) & BM_SAIF_STAT_RSRVD0)
+#define BM_SAIF_STAT_BUSY 0x00000001
+
+/* SAFI_DATA */
+#define BP_SAIF_DATA_PCM_RIGHT 16
+#define BM_SAIF_DATA_PCM_RIGHT 0xFFFF0000
+#define BF_SAIF_DATA_PCM_RIGHT(v) \
+ (((v) << 16) & BM_SAIF_DATA_PCM_RIGHT)
+#define BP_SAIF_DATA_PCM_LEFT 0
+#define BM_SAIF_DATA_PCM_LEFT 0x0000FFFF
+#define BF_SAIF_DATA_PCM_LEFT(v) \
+ (((v) << 0) & BM_SAIF_DATA_PCM_LEFT)
+
+/* SAIF_VERSION */
+#define BP_SAIF_VERSION_MAJOR 24
+#define BM_SAIF_VERSION_MAJOR 0xFF000000
+#define BF_SAIF_VERSION_MAJOR(v) \
+ (((v) << 24) & BM_SAIF_VERSION_MAJOR)
+#define BP_SAIF_VERSION_MINOR 16
+#define BM_SAIF_VERSION_MINOR 0x00FF0000
+#define BF_SAIF_VERSION_MINOR(v) \
+ (((v) << 16) & BM_SAIF_VERSION_MINOR)
+#define BP_SAIF_VERSION_STEP 0
+#define BM_SAIF_VERSION_STEP 0x0000FFFF
+#define BF_SAIF_VERSION_STEP(v) \
+ (((v) << 0) & BM_SAIF_VERSION_STEP)
+
+#define MXS_SAIF_MCLK 0
+
+#include "mxs-pcm.h"
+
+struct mxs_saif {
+ struct device *dev;
+ struct clk *clk;
+ unsigned int mclk;
+ unsigned int mclk_in_use;
+ void __iomem *base;
+ int irq;
+ struct mxs_pcm_dma_params dma_param;
+ unsigned int id;
+ unsigned int master_id;
+ unsigned int cur_rate;
+ unsigned int ongoing;
+
+ struct platform_device *soc_platform_pdev;
+ u32 fifo_underrun;
+ u32 fifo_overrun;
+};
+
+extern int mxs_saif_put_mclk(unsigned int saif_id);
+extern int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
+ unsigned int rate);
+#endif
diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c
new file mode 100644
index 0000000..7fbeaec
--- /dev/null
+++ b/sound/soc/mxs/mxs-sgtl5000.c
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/soc-dapm.h>
+#include <asm/mach-types.h>
+
+#include "../codecs/sgtl5000.h"
+#include "mxs-saif.h"
+
+static int mxs_sgtl5000_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ unsigned int rate = params_rate(params);
+ u32 dai_format, mclk;
+ int ret;
+
+ /* sgtl5000 does not support 512*rate when in 96000 fs */
+ switch (rate) {
+ case 96000:
+ mclk = 256 * rate;
+ break;
+ default:
+ mclk = 512 * rate;
+ break;
+ }
+
+ /* Sgtl5000 sysclk should be >= 8MHz and <= 27M */
+ if (mclk < 8000000 || mclk > 27000000)
+ return -EINVAL;
+
+ /* Set SGTL5000's SYSCLK (provided by SAIF MCLK) */
+ ret = snd_soc_dai_set_sysclk(codec_dai, SGTL5000_SYSCLK, mclk, 0);
+ if (ret)
+ return ret;
+
+ /* The SAIF MCLK should be the same as SGTL5000_SYSCLK */
+ ret = snd_soc_dai_set_sysclk(cpu_dai, MXS_SAIF_MCLK, mclk, 0);
+ if (ret)
+ return ret;
+
+ /* set codec to slave mode */
+ dai_format = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS;
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, dai_format);
+ if (ret)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, dai_format);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops mxs_sgtl5000_hifi_ops = {
+ .hw_params = mxs_sgtl5000_hw_params,
+};
+
+static struct snd_soc_dai_link mxs_sgtl5000_dai[] = {
+ {
+ .name = "HiFi Tx",
+ .stream_name = "HiFi Playback",
+ .codec_dai_name = "sgtl5000",
+ .codec_name = "sgtl5000.0-000a",
+ .cpu_dai_name = "mxs-saif.0",
+ .platform_name = "mxs-pcm-audio.0",
+ .ops = &mxs_sgtl5000_hifi_ops,
+ }, {
+ .name = "HiFi Rx",
+ .stream_name = "HiFi Capture",
+ .codec_dai_name = "sgtl5000",
+ .codec_name = "sgtl5000.0-000a",
+ .cpu_dai_name = "mxs-saif.1",
+ .platform_name = "mxs-pcm-audio.1",
+ .ops = &mxs_sgtl5000_hifi_ops,
+ },
+};
+
+static struct snd_soc_card mxs_sgtl5000 = {
+ .name = "mxs_sgtl5000",
+ .dai_link = mxs_sgtl5000_dai,
+ .num_links = ARRAY_SIZE(mxs_sgtl5000_dai),
+};
+
+static int __devinit mxs_sgtl5000_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &mxs_sgtl5000;
+ int ret;
+
+ /*
+ * Set an init clock(11.28Mhz) for sgtl5000 initialization(i2c r/w).
+ * The Sgtl5000 sysclk is derived from saif0 mclk and it's range
+ * should be >= 8MHz and <= 27M.
+ */
+ ret = mxs_saif_get_mclk(0, 44100 * 256, 44100);
+ if (ret)
+ return ret;
+
+ card->dev = &pdev->dev;
+ platform_set_drvdata(pdev, card);
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devexit mxs_sgtl5000_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ mxs_saif_put_mclk(0);
+
+ snd_soc_unregister_card(card);
+
+ return 0;
+}
+
+static struct platform_driver mxs_sgtl5000_audio_driver = {
+ .driver = {
+ .name = "mxs-sgtl5000",
+ .owner = THIS_MODULE,
+ },
+ .probe = mxs_sgtl5000_probe,
+ .remove = __devexit_p(mxs_sgtl5000_remove),
+};
+
+static int __init mxs_sgtl5000_init(void)
+{
+ return platform_driver_register(&mxs_sgtl5000_audio_driver);
+}
+module_init(mxs_sgtl5000_init);
+
+static void __exit mxs_sgtl5000_exit(void)
+{
+ platform_driver_unregister(&mxs_sgtl5000_audio_driver);
+}
+module_exit(mxs_sgtl5000_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MXS ALSA SoC Machine driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/nuc900/nuc900-pcm.c b/sound/soc/nuc900/nuc900-pcm.c
index d589ef1..ae8d680 100644
--- a/sound/soc/nuc900/nuc900-pcm.c
+++ b/sound/soc/nuc900/nuc900-pcm.c
@@ -227,7 +227,7 @@
return ret;
}
-int nuc900_dma_getposition(struct snd_pcm_substream *substream,
+static int nuc900_dma_getposition(struct snd_pcm_substream *substream,
dma_addr_t *src, dma_addr_t *dst)
{
struct snd_pcm_runtime *runtime = substream->runtime;
@@ -268,7 +268,7 @@
nuc900_audio = nuc900_ac97_data;
if (request_irq(nuc900_audio->irq_num, nuc900_dma_interrupt,
- IRQF_DISABLED, "nuc900-dma", substream))
+ 0, "nuc900-dma", substream))
return -EBUSY;
runtime->private_data = nuc900_audio;
@@ -318,7 +318,6 @@
static int nuc900_dma_new(struct snd_soc_pcm_runtime *rtd)
{
struct snd_card *card = rtd->card->snd_card;
- struct snd_soc_dai *dai = rtd->cpu_dai;
struct snd_pcm *pcm = rtd->pcm;
if (!card->dev->dma_mask)
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 59e2c8d..052fd75 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -1,7 +1,7 @@
# OMAP Platform Support
snd-soc-omap-objs := omap-pcm.o
snd-soc-omap-mcbsp-objs := omap-mcbsp.o
-snd-soc-omap-mcpdm-objs := omap-mcpdm.o mcpdm.o
+snd-soc-omap-mcpdm-objs := omap-mcpdm.o
snd-soc-omap-hdmi-objs := omap-hdmi.o
obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o
diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c
index 73dde4a..8da55e9 100644
--- a/sound/soc/omap/am3517evm.c
+++ b/sound/soc/omap/am3517evm.c
@@ -43,26 +43,6 @@
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int ret;
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return ret;
- }
-
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0,
CODEC_CLOCK, SND_SOC_CLOCK_IN);
@@ -110,28 +90,6 @@
{"MICIN", NULL, "Mic In"},
};
-static int am3517evm_aic23_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- /* Add am3517-evm specific widgets */
- snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets,
- ARRAY_SIZE(tlv320aic23_dapm_widgets));
-
- /* Set up davinci-evm specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- /* always connected */
- snd_soc_dapm_enable_pin(dapm, "Line Out");
- snd_soc_dapm_enable_pin(dapm, "Line In");
- snd_soc_dapm_enable_pin(dapm, "Mic In");
-
- snd_soc_dapm_sync(dapm);
-
- return 0;
-}
-
/* Digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link am3517evm_dai = {
.name = "TLV320AIC23",
@@ -140,7 +98,8 @@
.codec_dai_name = "tlv320aic23-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "tlv320aic23-codec.2-001a",
- .init = am3517evm_aic23_init,
+ .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.ops = &am3517evm_ops,
};
@@ -149,6 +108,11 @@
.name = "am3517evm",
.dai_link = &am3517evm_dai,
.num_links = 1,
+
+ .dapm_widgets = tlv320aic23_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *am3517evm_snd_device;
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 0aa475f..dcb7b689 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -569,7 +569,6 @@
snd_soc_dapm_disable_pin(dapm, "Speaker");
snd_soc_dapm_disable_pin(dapm, "AGCIN");
snd_soc_dapm_disable_pin(dapm, "AGCOUT");
- snd_soc_dapm_sync(dapm);
/* Add virtual switch */
ret = snd_soc_add_controls(codec, ams_delta_audio_controls,
diff --git a/sound/soc/omap/igep0020.c b/sound/soc/omap/igep0020.c
index 0ae3470..84615a7 100644
--- a/sound/soc/omap/igep0020.c
+++ b/sound/soc/omap/igep0020.c
@@ -38,29 +38,8 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int ret;
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return ret;
- }
-
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
SND_SOC_CLOCK_IN);
@@ -84,6 +63,8 @@
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.ops = &igep2_ops,
};
diff --git a/sound/soc/omap/mcpdm.c b/sound/soc/omap/mcpdm.c
deleted file mode 100644
index 50e5919..0000000
--- a/sound/soc/omap/mcpdm.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * mcpdm.c -- McPDM interface driver
- *
- * Author: Jorge Eduardo Candelaria <x0107209@ti.com>
- * Copyright (C) 2009 - Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/wait.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include "mcpdm.h"
-
-static struct omap_mcpdm *mcpdm;
-
-static inline void omap_mcpdm_write(u16 reg, u32 val)
-{
- __raw_writel(val, mcpdm->io_base + reg);
-}
-
-static inline int omap_mcpdm_read(u16 reg)
-{
- return __raw_readl(mcpdm->io_base + reg);
-}
-
-static void omap_mcpdm_reg_dump(void)
-{
- dev_dbg(mcpdm->dev, "***********************\n");
- dev_dbg(mcpdm->dev, "IRQSTATUS_RAW: 0x%04x\n",
- omap_mcpdm_read(MCPDM_IRQSTATUS_RAW));
- dev_dbg(mcpdm->dev, "IRQSTATUS: 0x%04x\n",
- omap_mcpdm_read(MCPDM_IRQSTATUS));
- dev_dbg(mcpdm->dev, "IRQENABLE_SET: 0x%04x\n",
- omap_mcpdm_read(MCPDM_IRQENABLE_SET));
- dev_dbg(mcpdm->dev, "IRQENABLE_CLR: 0x%04x\n",
- omap_mcpdm_read(MCPDM_IRQENABLE_CLR));
- dev_dbg(mcpdm->dev, "IRQWAKE_EN: 0x%04x\n",
- omap_mcpdm_read(MCPDM_IRQWAKE_EN));
- dev_dbg(mcpdm->dev, "DMAENABLE_SET: 0x%04x\n",
- omap_mcpdm_read(MCPDM_DMAENABLE_SET));
- dev_dbg(mcpdm->dev, "DMAENABLE_CLR: 0x%04x\n",
- omap_mcpdm_read(MCPDM_DMAENABLE_CLR));
- dev_dbg(mcpdm->dev, "DMAWAKEEN: 0x%04x\n",
- omap_mcpdm_read(MCPDM_DMAWAKEEN));
- dev_dbg(mcpdm->dev, "CTRL: 0x%04x\n",
- omap_mcpdm_read(MCPDM_CTRL));
- dev_dbg(mcpdm->dev, "DN_DATA: 0x%04x\n",
- omap_mcpdm_read(MCPDM_DN_DATA));
- dev_dbg(mcpdm->dev, "UP_DATA: 0x%04x\n",
- omap_mcpdm_read(MCPDM_UP_DATA));
- dev_dbg(mcpdm->dev, "FIFO_CTRL_DN: 0x%04x\n",
- omap_mcpdm_read(MCPDM_FIFO_CTRL_DN));
- dev_dbg(mcpdm->dev, "FIFO_CTRL_UP: 0x%04x\n",
- omap_mcpdm_read(MCPDM_FIFO_CTRL_UP));
- dev_dbg(mcpdm->dev, "DN_OFFSET: 0x%04x\n",
- omap_mcpdm_read(MCPDM_DN_OFFSET));
- dev_dbg(mcpdm->dev, "***********************\n");
-}
-
-/*
- * Takes the McPDM module in and out of reset state.
- * Uplink and downlink can be reset individually.
- */
-static void omap_mcpdm_reset_capture(int reset)
-{
- int ctrl = omap_mcpdm_read(MCPDM_CTRL);
-
- if (reset)
- ctrl |= SW_UP_RST;
- else
- ctrl &= ~SW_UP_RST;
-
- omap_mcpdm_write(MCPDM_CTRL, ctrl);
-}
-
-static void omap_mcpdm_reset_playback(int reset)
-{
- int ctrl = omap_mcpdm_read(MCPDM_CTRL);
-
- if (reset)
- ctrl |= SW_DN_RST;
- else
- ctrl &= ~SW_DN_RST;
-
- omap_mcpdm_write(MCPDM_CTRL, ctrl);
-}
-
-/*
- * Enables the transfer through the PDM interface to/from the Phoenix
- * codec by enabling the corresponding UP or DN channels.
- */
-void omap_mcpdm_start(int stream)
-{
- int ctrl = omap_mcpdm_read(MCPDM_CTRL);
-
- if (stream)
- ctrl |= mcpdm->up_channels;
- else
- ctrl |= mcpdm->dn_channels;
-
- omap_mcpdm_write(MCPDM_CTRL, ctrl);
-}
-
-/*
- * Disables the transfer through the PDM interface to/from the Phoenix
- * codec by disabling the corresponding UP or DN channels.
- */
-void omap_mcpdm_stop(int stream)
-{
- int ctrl = omap_mcpdm_read(MCPDM_CTRL);
-
- if (stream)
- ctrl &= ~mcpdm->up_channels;
- else
- ctrl &= ~mcpdm->dn_channels;
-
- omap_mcpdm_write(MCPDM_CTRL, ctrl);
-}
-
-/*
- * Configures McPDM uplink for audio recording.
- * This function should be called before omap_mcpdm_start.
- */
-int omap_mcpdm_capture_open(struct omap_mcpdm_link *uplink)
-{
- int irq_mask = 0;
- int ctrl;
-
- if (!uplink)
- return -EINVAL;
-
- mcpdm->uplink = uplink;
-
- /* Enable irq request generation */
- irq_mask |= uplink->irq_mask & MCPDM_UPLINK_IRQ_MASK;
- omap_mcpdm_write(MCPDM_IRQENABLE_SET, irq_mask);
-
- /* Configure uplink threshold */
- if (uplink->threshold > UP_THRES_MAX)
- uplink->threshold = UP_THRES_MAX;
-
- omap_mcpdm_write(MCPDM_FIFO_CTRL_UP, uplink->threshold);
-
- /* Configure DMA controller */
- omap_mcpdm_write(MCPDM_DMAENABLE_SET, DMA_UP_ENABLE);
-
- /* Set pdm out format */
- ctrl = omap_mcpdm_read(MCPDM_CTRL);
- ctrl &= ~PDMOUTFORMAT;
- ctrl |= uplink->format & PDMOUTFORMAT;
-
- /* Uplink channels */
- mcpdm->up_channels = uplink->channels & (PDM_UP_MASK | PDM_STATUS_MASK);
-
- omap_mcpdm_write(MCPDM_CTRL, ctrl);
-
- return 0;
-}
-
-/*
- * Configures McPDM downlink for audio playback.
- * This function should be called before omap_mcpdm_start.
- */
-int omap_mcpdm_playback_open(struct omap_mcpdm_link *downlink)
-{
- int irq_mask = 0;
- int ctrl;
-
- if (!downlink)
- return -EINVAL;
-
- mcpdm->downlink = downlink;
-
- /* Enable irq request generation */
- irq_mask |= downlink->irq_mask & MCPDM_DOWNLINK_IRQ_MASK;
- omap_mcpdm_write(MCPDM_IRQENABLE_SET, irq_mask);
-
- /* Configure uplink threshold */
- if (downlink->threshold > DN_THRES_MAX)
- downlink->threshold = DN_THRES_MAX;
-
- omap_mcpdm_write(MCPDM_FIFO_CTRL_DN, downlink->threshold);
-
- /* Enable DMA request generation */
- omap_mcpdm_write(MCPDM_DMAENABLE_SET, DMA_DN_ENABLE);
-
- /* Set pdm out format */
- ctrl = omap_mcpdm_read(MCPDM_CTRL);
- ctrl &= ~PDMOUTFORMAT;
- ctrl |= downlink->format & PDMOUTFORMAT;
-
- /* Downlink channels */
- mcpdm->dn_channels = downlink->channels & (PDM_DN_MASK | PDM_CMD_MASK);
-
- omap_mcpdm_write(MCPDM_CTRL, ctrl);
-
- return 0;
-}
-
-/*
- * Cleans McPDM uplink configuration.
- * This function should be called when the stream is closed.
- */
-int omap_mcpdm_capture_close(struct omap_mcpdm_link *uplink)
-{
- int irq_mask = 0;
-
- if (!uplink)
- return -EINVAL;
-
- /* Disable irq request generation */
- irq_mask |= uplink->irq_mask & MCPDM_UPLINK_IRQ_MASK;
- omap_mcpdm_write(MCPDM_IRQENABLE_CLR, irq_mask);
-
- /* Disable DMA request generation */
- omap_mcpdm_write(MCPDM_DMAENABLE_CLR, DMA_UP_ENABLE);
-
- /* Clear Downlink channels */
- mcpdm->up_channels = 0;
-
- mcpdm->uplink = NULL;
-
- return 0;
-}
-
-/*
- * Cleans McPDM downlink configuration.
- * This function should be called when the stream is closed.
- */
-int omap_mcpdm_playback_close(struct omap_mcpdm_link *downlink)
-{
- int irq_mask = 0;
-
- if (!downlink)
- return -EINVAL;
-
- /* Disable irq request generation */
- irq_mask |= downlink->irq_mask & MCPDM_DOWNLINK_IRQ_MASK;
- omap_mcpdm_write(MCPDM_IRQENABLE_CLR, irq_mask);
-
- /* Disable DMA request generation */
- omap_mcpdm_write(MCPDM_DMAENABLE_CLR, DMA_DN_ENABLE);
-
- /* clear Downlink channels */
- mcpdm->dn_channels = 0;
-
- mcpdm->downlink = NULL;
-
- return 0;
-}
-
-static irqreturn_t omap_mcpdm_irq_handler(int irq, void *dev_id)
-{
- struct omap_mcpdm *mcpdm_irq = dev_id;
- int irq_status;
-
- irq_status = omap_mcpdm_read(MCPDM_IRQSTATUS);
-
- /* Acknowledge irq event */
- omap_mcpdm_write(MCPDM_IRQSTATUS, irq_status);
-
- if (irq & MCPDM_DN_IRQ_FULL) {
- dev_err(mcpdm_irq->dev, "DN FIFO error %x\n", irq_status);
- omap_mcpdm_reset_playback(1);
- omap_mcpdm_playback_open(mcpdm_irq->downlink);
- omap_mcpdm_reset_playback(0);
- }
-
- if (irq & MCPDM_DN_IRQ_EMPTY) {
- dev_err(mcpdm_irq->dev, "DN FIFO error %x\n", irq_status);
- omap_mcpdm_reset_playback(1);
- omap_mcpdm_playback_open(mcpdm_irq->downlink);
- omap_mcpdm_reset_playback(0);
- }
-
- if (irq & MCPDM_DN_IRQ) {
- dev_dbg(mcpdm_irq->dev, "DN write request\n");
- }
-
- if (irq & MCPDM_UP_IRQ_FULL) {
- dev_err(mcpdm_irq->dev, "UP FIFO error %x\n", irq_status);
- omap_mcpdm_reset_capture(1);
- omap_mcpdm_capture_open(mcpdm_irq->uplink);
- omap_mcpdm_reset_capture(0);
- }
-
- if (irq & MCPDM_UP_IRQ_EMPTY) {
- dev_err(mcpdm_irq->dev, "UP FIFO error %x\n", irq_status);
- omap_mcpdm_reset_capture(1);
- omap_mcpdm_capture_open(mcpdm_irq->uplink);
- omap_mcpdm_reset_capture(0);
- }
-
- if (irq & MCPDM_UP_IRQ) {
- dev_dbg(mcpdm_irq->dev, "UP write request\n");
- }
-
- return IRQ_HANDLED;
-}
-
-int omap_mcpdm_request(void)
-{
- int ret;
-
- clk_enable(mcpdm->clk);
-
- spin_lock(&mcpdm->lock);
-
- if (!mcpdm->free) {
- dev_err(mcpdm->dev, "McPDM interface is in use\n");
- spin_unlock(&mcpdm->lock);
- ret = -EBUSY;
- goto err;
- }
- mcpdm->free = 0;
-
- spin_unlock(&mcpdm->lock);
-
- /* Disable lines while request is ongoing */
- omap_mcpdm_write(MCPDM_CTRL, 0x00);
-
- ret = request_irq(mcpdm->irq, omap_mcpdm_irq_handler,
- 0, "McPDM", (void *)mcpdm);
- if (ret) {
- dev_err(mcpdm->dev, "Request for McPDM IRQ failed\n");
- goto err;
- }
-
- return 0;
-
-err:
- clk_disable(mcpdm->clk);
- return ret;
-}
-
-void omap_mcpdm_free(void)
-{
- spin_lock(&mcpdm->lock);
- if (mcpdm->free) {
- dev_err(mcpdm->dev, "McPDM interface is already free\n");
- spin_unlock(&mcpdm->lock);
- return;
- }
- mcpdm->free = 1;
- spin_unlock(&mcpdm->lock);
-
- clk_disable(mcpdm->clk);
-
- free_irq(mcpdm->irq, (void *)mcpdm);
-}
-
-/* Enable/disable DC offset cancelation for the analog
- * headset path (PDM channels 1 and 2).
- */
-int omap_mcpdm_set_offset(int offset1, int offset2)
-{
- int offset;
-
- if ((offset1 > DN_OFST_MAX) || (offset2 > DN_OFST_MAX))
- return -EINVAL;
-
- offset = (offset1 << DN_OFST_RX1) | (offset2 << DN_OFST_RX2);
-
- /* offset cancellation for channel 1 */
- if (offset1)
- offset |= DN_OFST_RX1_EN;
- else
- offset &= ~DN_OFST_RX1_EN;
-
- /* offset cancellation for channel 2 */
- if (offset2)
- offset |= DN_OFST_RX2_EN;
- else
- offset &= ~DN_OFST_RX2_EN;
-
- omap_mcpdm_write(MCPDM_DN_OFFSET, offset);
-
- return 0;
-}
-
-int __devinit omap_mcpdm_probe(struct platform_device *pdev)
-{
- struct resource *res;
- int ret = 0;
-
- mcpdm = kzalloc(sizeof(struct omap_mcpdm), GFP_KERNEL);
- if (!mcpdm) {
- ret = -ENOMEM;
- goto exit;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "no resource\n");
- goto err_resource;
- }
-
- spin_lock_init(&mcpdm->lock);
- mcpdm->free = 1;
- mcpdm->io_base = ioremap(res->start, resource_size(res));
- if (!mcpdm->io_base) {
- ret = -ENOMEM;
- goto err_resource;
- }
-
- mcpdm->irq = platform_get_irq(pdev, 0);
-
- mcpdm->clk = clk_get(&pdev->dev, "pdm_ck");
- if (IS_ERR(mcpdm->clk)) {
- ret = PTR_ERR(mcpdm->clk);
- dev_err(&pdev->dev, "unable to get pdm_ck: %d\n", ret);
- goto err_clk;
- }
-
- mcpdm->dev = &pdev->dev;
- platform_set_drvdata(pdev, mcpdm);
-
- return 0;
-
-err_clk:
- iounmap(mcpdm->io_base);
-err_resource:
- kfree(mcpdm);
-exit:
- return ret;
-}
-
-int omap_mcpdm_remove(struct platform_device *pdev)
-{
- struct omap_mcpdm *mcpdm_ptr = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- clk_put(mcpdm_ptr->clk);
-
- iounmap(mcpdm_ptr->io_base);
-
- mcpdm_ptr->clk = NULL;
- mcpdm_ptr->free = 0;
- mcpdm_ptr->dev = NULL;
-
- kfree(mcpdm_ptr);
-
- return 0;
-}
-
diff --git a/sound/soc/omap/mcpdm.h b/sound/soc/omap/mcpdm.h
deleted file mode 100644
index 20c20a8..0000000
--- a/sound/soc/omap/mcpdm.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * mcpdm.h -- Defines for McPDM driver
- *
- * Author: Jorge Eduardo Candelaria <x0107209@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-/* McPDM registers */
-
-#define MCPDM_REVISION 0x00
-#define MCPDM_SYSCONFIG 0x10
-#define MCPDM_IRQSTATUS_RAW 0x24
-#define MCPDM_IRQSTATUS 0x28
-#define MCPDM_IRQENABLE_SET 0x2C
-#define MCPDM_IRQENABLE_CLR 0x30
-#define MCPDM_IRQWAKE_EN 0x34
-#define MCPDM_DMAENABLE_SET 0x38
-#define MCPDM_DMAENABLE_CLR 0x3C
-#define MCPDM_DMAWAKEEN 0x40
-#define MCPDM_CTRL 0x44
-#define MCPDM_DN_DATA 0x48
-#define MCPDM_UP_DATA 0x4C
-#define MCPDM_FIFO_CTRL_DN 0x50
-#define MCPDM_FIFO_CTRL_UP 0x54
-#define MCPDM_DN_OFFSET 0x58
-
-/*
- * MCPDM_IRQ bit fields
- * IRQSTATUS_RAW, IRQSTATUS, IRQENABLE_SET, IRQENABLE_CLR
- */
-
-#define MCPDM_DN_IRQ (1 << 0)
-#define MCPDM_DN_IRQ_EMPTY (1 << 1)
-#define MCPDM_DN_IRQ_ALMST_EMPTY (1 << 2)
-#define MCPDM_DN_IRQ_FULL (1 << 3)
-
-#define MCPDM_UP_IRQ (1 << 8)
-#define MCPDM_UP_IRQ_EMPTY (1 << 9)
-#define MCPDM_UP_IRQ_ALMST_FULL (1 << 10)
-#define MCPDM_UP_IRQ_FULL (1 << 11)
-
-#define MCPDM_DOWNLINK_IRQ_MASK 0x00F
-#define MCPDM_UPLINK_IRQ_MASK 0xF00
-
-/*
- * MCPDM_DMAENABLE bit fields
- */
-
-#define DMA_DN_ENABLE 0x1
-#define DMA_UP_ENABLE 0x2
-
-/*
- * MCPDM_CTRL bit fields
- */
-
-#define PDM_UP1_EN 0x0001
-#define PDM_UP2_EN 0x0002
-#define PDM_UP3_EN 0x0004
-#define PDM_DN1_EN 0x0008
-#define PDM_DN2_EN 0x0010
-#define PDM_DN3_EN 0x0020
-#define PDM_DN4_EN 0x0040
-#define PDM_DN5_EN 0x0080
-#define PDMOUTFORMAT 0x0100
-#define CMD_INT 0x0200
-#define STATUS_INT 0x0400
-#define SW_UP_RST 0x0800
-#define SW_DN_RST 0x1000
-#define PDM_UP_MASK 0x007
-#define PDM_DN_MASK 0x0F8
-#define PDM_CMD_MASK 0x200
-#define PDM_STATUS_MASK 0x400
-
-
-#define PDMOUTFORMAT_LJUST (0 << 8)
-#define PDMOUTFORMAT_RJUST (1 << 8)
-
-/*
- * MCPDM_FIFO_CTRL bit fields
- */
-
-#define UP_THRES_MAX 0xF
-#define DN_THRES_MAX 0xF
-
-/*
- * MCPDM_DN_OFFSET bit fields
- */
-
-#define DN_OFST_RX1_EN 0x0001
-#define DN_OFST_RX2_EN 0x0100
-
-#define DN_OFST_RX1 1
-#define DN_OFST_RX2 9
-#define DN_OFST_MAX 0x1F
-
-#define MCPDM_UPLINK 1
-#define MCPDM_DOWNLINK 2
-
-struct omap_mcpdm_link {
- int irq_mask;
- int threshold;
- int format;
- int channels;
-};
-
-struct omap_mcpdm_platform_data {
- unsigned long phys_base;
- u16 irq;
-};
-
-struct omap_mcpdm {
- struct device *dev;
- unsigned long phys_base;
- void __iomem *io_base;
- u8 free;
- int irq;
-
- spinlock_t lock;
- struct omap_mcpdm_platform_data *pdata;
- struct clk *clk;
- struct omap_mcpdm_link *downlink;
- struct omap_mcpdm_link *uplink;
- struct completion irq_completion;
-
- int dn_channels;
- int up_channels;
-};
-
-extern void omap_mcpdm_start(int stream);
-extern void omap_mcpdm_stop(int stream);
-extern int omap_mcpdm_capture_open(struct omap_mcpdm_link *uplink);
-extern int omap_mcpdm_playback_open(struct omap_mcpdm_link *downlink);
-extern int omap_mcpdm_capture_close(struct omap_mcpdm_link *uplink);
-extern int omap_mcpdm_playback_close(struct omap_mcpdm_link *downlink);
-extern int omap_mcpdm_request(void);
-extern void omap_mcpdm_free(void);
-extern int omap_mcpdm_set_offset(int offset1, int offset2);
-int __devinit omap_mcpdm_probe(struct platform_device *pdev);
-int omap_mcpdm_remove(struct platform_device *pdev);
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 62e292f..7e3c20c 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -115,25 +115,8 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int err;
- /* Set codec DAI configuration */
- err = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (err < 0)
- return err;
-
- /* Set cpu DAI configuration */
- err = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (err < 0)
- return err;
-
/* Set the codec system clock for DAC and ADC */
err = snd_soc_dai_set_sysclk(codec_dai, 0, 12000000,
SND_SOC_CLOCK_IN);
@@ -274,7 +257,6 @@
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
- int err;
/* Not connected */
snd_soc_dapm_nc_pin(dapm, "MONO_LOUT");
@@ -286,21 +268,6 @@
snd_soc_dapm_nc_pin(dapm, "LINE2L");
snd_soc_dapm_nc_pin(dapm, "LINE2R");
- /* Add N810 specific controls */
- err = snd_soc_add_controls(codec, aic33_n810_controls,
- ARRAY_SIZE(aic33_n810_controls));
- if (err < 0)
- return err;
-
- /* Add N810 specific widgets */
- snd_soc_dapm_new_controls(dapm, aic33_dapm_widgets,
- ARRAY_SIZE(aic33_dapm_widgets));
-
- /* Set up N810 specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- snd_soc_dapm_sync(dapm);
-
return 0;
}
@@ -312,6 +279,8 @@
.platform_name = "omap-pcm-audio",
.codec_name = "tlv320aic3x-codec.2-0018",
.codec_dai_name = "tlv320aic3x-hifi",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.init = n810_aic33_init,
.ops = &n810_ops,
};
@@ -321,6 +290,13 @@
.name = "N810",
.dai_link = &n810_dai,
.num_links = 1,
+
+ .controls = aic33_n810_controls,
+ .num_controls = ARRAY_SIZE(aic33_n810_controls),
+ .dapm_widgets = aic33_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(aic33_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *n810_snd_device;
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 478d607..4314647 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -317,6 +317,10 @@
return 0;
}
+ regs->rcr2 &= ~(RPHASE | RFRLEN2(0x7f) | RWDLEN2(7));
+ regs->xcr2 &= ~(RPHASE | XFRLEN2(0x7f) | XWDLEN2(7));
+ regs->rcr1 &= ~(RFRLEN1(0x7f) | RWDLEN1(7));
+ regs->xcr1 &= ~(XFRLEN1(0x7f) | XWDLEN1(7));
format = mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
wpf = channels = params_channels(params);
if (channels == 2 && (format == SND_SOC_DAIFMT_I2S ||
@@ -369,6 +373,8 @@
framesize = wlen * channels;
/* Set FS period and length in terms of bit clock periods */
+ regs->srgr2 &= ~FPER(0xfff);
+ regs->srgr1 &= ~FWID(0xff);
switch (format) {
case SND_SOC_DAIFMT_I2S:
case SND_SOC_DAIFMT_LEFT_J:
@@ -398,7 +404,7 @@
{
struct omap_mcbsp_data *mcbsp_data = snd_soc_dai_get_drvdata(cpu_dai);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
- unsigned int temp_fmt = fmt;
+ bool inv_fs = false;
if (mcbsp_data->configured)
return 0;
@@ -430,21 +436,21 @@
regs->xcr2 |= XDATDLY(0);
regs->spcr1 |= RJUST(2);
/* Invert FS polarity configuration */
- temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
+ inv_fs = true;
break;
case SND_SOC_DAIFMT_DSP_A:
/* 1-bit data delay */
regs->rcr2 |= RDATDLY(1);
regs->xcr2 |= XDATDLY(1);
/* Invert FS polarity configuration */
- temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
+ inv_fs = true;
break;
case SND_SOC_DAIFMT_DSP_B:
/* 0-bit data delay */
regs->rcr2 |= RDATDLY(0);
regs->xcr2 |= XDATDLY(0);
/* Invert FS polarity configuration */
- temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
+ inv_fs = true;
break;
default:
/* Unsupported data format */
@@ -468,7 +474,7 @@
}
/* Set bit clock (CLKX/CLKR) and FS polarities */
- switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) {
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
/*
* Normal BCLK + FS.
@@ -489,6 +495,8 @@
default:
return -EINVAL;
}
+ if (inv_fs == true)
+ regs->pcr0 ^= FSXP | FSRP;
return 0;
}
@@ -503,6 +511,7 @@
return -ENODEV;
mcbsp_data->clk_div = div;
+ regs->srgr1 &= ~CLKGDV(0xff);
regs->srgr1 |= CLKGDV(div - 1);
return 0;
@@ -516,11 +525,12 @@
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
int err = 0;
- if (mcbsp_data->active)
+ if (mcbsp_data->active) {
if (freq == mcbsp_data->in_freq)
return 0;
else
return -EBUSY;
+ }
/* The McBSP signal muxing functions are only available on McBSP1 */
if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
@@ -531,6 +541,8 @@
return -EINVAL;
mcbsp_data->in_freq = freq;
+ regs->srgr2 &= ~CLKSM;
+ regs->pcr0 &= ~SCLKME;
switch (clk_id) {
case OMAP_MCBSP_SYSCLK_CLK:
@@ -605,8 +617,7 @@
return 0;
}
-static struct snd_soc_dai_driver omap_mcbsp_dai =
-{
+static struct snd_soc_dai_driver omap_mcbsp_dai = {
.probe = mcbsp_dai_probe,
.playback = {
.channels_min = 1,
diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
index bed09c2..41d1706 100644
--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -1,11 +1,12 @@
/*
* omap-mcpdm.c -- OMAP ALSA SoC DAI driver using McPDM port
*
- * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2009 - 2011 Texas Instruments
*
- * Author: Misael Lopez Cruz <x0052729@ti.com>
+ * Author: Misael Lopez Cruz <misael.lopez@ti.com>
* Contact: Jorge Eduardo Candelaria <x0107209@ti.com>
* Margarita Olaya <magi.olaya@ti.com>
+ * Peter Ujfalusi <peter.ujfalusi@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -25,41 +26,42 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
-#include <sound/initval.h>
#include <sound/soc.h>
#include <plat/dma.h>
-#include <plat/mcbsp.h>
-#include "mcpdm.h"
+#include <plat/omap_hwmod.h>
+#include "omap-mcpdm.h"
#include "omap-pcm.h"
-struct omap_mcpdm_data {
- struct omap_mcpdm_link *links;
- int active;
-};
+struct omap_mcpdm {
+ struct device *dev;
+ unsigned long phys_base;
+ void __iomem *io_base;
+ int irq;
-static struct omap_mcpdm_link omap_mcpdm_links[] = {
- /* downlink */
- {
- .irq_mask = MCPDM_DN_IRQ_EMPTY | MCPDM_DN_IRQ_FULL,
- .threshold = 1,
- .format = PDMOUTFORMAT_LJUST,
- },
- /* uplink */
- {
- .irq_mask = MCPDM_UP_IRQ_EMPTY | MCPDM_UP_IRQ_FULL,
- .threshold = 1,
- .format = PDMOUTFORMAT_LJUST,
- },
-};
+ struct mutex mutex;
-static struct omap_mcpdm_data mcpdm_data = {
- .links = omap_mcpdm_links,
- .active = 0,
+ /* channel data */
+ u32 dn_channels;
+ u32 up_channels;
+
+ /* McPDM FIFO thresholds */
+ u32 dn_threshold;
+ u32 up_threshold;
+
+ /* McPDM dn offsets for rx1, and 2 channels */
+ u32 dn_rx_offset;
};
/*
@@ -71,88 +73,259 @@
.dma_req = OMAP44XX_DMA_MCPDM_DL,
.data_type = OMAP_DMA_DATA_TYPE_S32,
.sync_mode = OMAP_DMA_SYNC_PACKET,
- .packet_size = 16,
- .port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_DN_DATA,
+ .port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_REG_DN_DATA,
},
{
.name = "Audio capture",
.dma_req = OMAP44XX_DMA_MCPDM_UP,
.data_type = OMAP_DMA_DATA_TYPE_S32,
.sync_mode = OMAP_DMA_SYNC_PACKET,
- .packet_size = 16,
- .port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_UP_DATA,
+ .port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_REG_UP_DATA,
},
};
+static inline void omap_mcpdm_write(struct omap_mcpdm *mcpdm, u16 reg, u32 val)
+{
+ __raw_writel(val, mcpdm->io_base + reg);
+}
+
+static inline int omap_mcpdm_read(struct omap_mcpdm *mcpdm, u16 reg)
+{
+ return __raw_readl(mcpdm->io_base + reg);
+}
+
+#ifdef DEBUG
+static void omap_mcpdm_reg_dump(struct omap_mcpdm *mcpdm)
+{
+ dev_dbg(mcpdm->dev, "***********************\n");
+ dev_dbg(mcpdm->dev, "IRQSTATUS_RAW: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_IRQSTATUS_RAW));
+ dev_dbg(mcpdm->dev, "IRQSTATUS: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_IRQSTATUS));
+ dev_dbg(mcpdm->dev, "IRQENABLE_SET: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_IRQENABLE_SET));
+ dev_dbg(mcpdm->dev, "IRQENABLE_CLR: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_IRQENABLE_CLR));
+ dev_dbg(mcpdm->dev, "IRQWAKE_EN: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_IRQWAKE_EN));
+ dev_dbg(mcpdm->dev, "DMAENABLE_SET: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_DMAENABLE_SET));
+ dev_dbg(mcpdm->dev, "DMAENABLE_CLR: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_DMAENABLE_CLR));
+ dev_dbg(mcpdm->dev, "DMAWAKEEN: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_DMAWAKEEN));
+ dev_dbg(mcpdm->dev, "CTRL: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL));
+ dev_dbg(mcpdm->dev, "DN_DATA: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_DN_DATA));
+ dev_dbg(mcpdm->dev, "UP_DATA: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_UP_DATA));
+ dev_dbg(mcpdm->dev, "FIFO_CTRL_DN: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_FIFO_CTRL_DN));
+ dev_dbg(mcpdm->dev, "FIFO_CTRL_UP: 0x%04x\n",
+ omap_mcpdm_read(mcpdm, MCPDM_REG_FIFO_CTRL_UP));
+ dev_dbg(mcpdm->dev, "***********************\n");
+}
+#else
+static void omap_mcpdm_reg_dump(struct omap_mcpdm *mcpdm) {}
+#endif
+
+/*
+ * Enables the transfer through the PDM interface to/from the Phoenix
+ * codec by enabling the corresponding UP or DN channels.
+ */
+static void omap_mcpdm_start(struct omap_mcpdm *mcpdm)
+{
+ u32 ctrl = omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL);
+
+ ctrl |= (MCPDM_SW_DN_RST | MCPDM_SW_UP_RST);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl);
+
+ ctrl |= mcpdm->dn_channels | mcpdm->up_channels;
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl);
+
+ ctrl &= ~(MCPDM_SW_DN_RST | MCPDM_SW_UP_RST);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl);
+}
+
+/*
+ * Disables the transfer through the PDM interface to/from the Phoenix
+ * codec by disabling the corresponding UP or DN channels.
+ */
+static void omap_mcpdm_stop(struct omap_mcpdm *mcpdm)
+{
+ u32 ctrl = omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL);
+
+ ctrl |= (MCPDM_SW_DN_RST | MCPDM_SW_UP_RST);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl);
+
+ ctrl &= ~(mcpdm->dn_channels | mcpdm->up_channels);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl);
+
+ ctrl &= ~(MCPDM_SW_DN_RST | MCPDM_SW_UP_RST);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl);
+
+}
+
+/*
+ * Is the physical McPDM interface active.
+ */
+static inline int omap_mcpdm_active(struct omap_mcpdm *mcpdm)
+{
+ return omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL) &
+ (MCPDM_PDM_DN_MASK | MCPDM_PDM_UP_MASK);
+}
+
+/*
+ * Configures McPDM uplink, and downlink for audio.
+ * This function should be called before omap_mcpdm_start.
+ */
+static void omap_mcpdm_open_streams(struct omap_mcpdm *mcpdm)
+{
+ omap_mcpdm_write(mcpdm, MCPDM_REG_IRQENABLE_SET,
+ MCPDM_DN_IRQ_EMPTY | MCPDM_DN_IRQ_FULL |
+ MCPDM_UP_IRQ_EMPTY | MCPDM_UP_IRQ_FULL);
+
+ /* Enable DN RX1/2 offset cancellation feature, if configured */
+ if (mcpdm->dn_rx_offset) {
+ u32 dn_offset = mcpdm->dn_rx_offset;
+
+ omap_mcpdm_write(mcpdm, MCPDM_REG_DN_OFFSET, dn_offset);
+ dn_offset |= (MCPDM_DN_OFST_RX1_EN | MCPDM_DN_OFST_RX2_EN);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_DN_OFFSET, dn_offset);
+ }
+
+ omap_mcpdm_write(mcpdm, MCPDM_REG_FIFO_CTRL_DN, mcpdm->dn_threshold);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_FIFO_CTRL_UP, mcpdm->up_threshold);
+
+ omap_mcpdm_write(mcpdm, MCPDM_REG_DMAENABLE_SET,
+ MCPDM_DMA_DN_ENABLE | MCPDM_DMA_UP_ENABLE);
+}
+
+/*
+ * Cleans McPDM uplink, and downlink configuration.
+ * This function should be called when the stream is closed.
+ */
+static void omap_mcpdm_close_streams(struct omap_mcpdm *mcpdm)
+{
+ /* Disable irq request generation for downlink */
+ omap_mcpdm_write(mcpdm, MCPDM_REG_IRQENABLE_CLR,
+ MCPDM_DN_IRQ_EMPTY | MCPDM_DN_IRQ_FULL);
+
+ /* Disable DMA request generation for downlink */
+ omap_mcpdm_write(mcpdm, MCPDM_REG_DMAENABLE_CLR, MCPDM_DMA_DN_ENABLE);
+
+ /* Disable irq request generation for uplink */
+ omap_mcpdm_write(mcpdm, MCPDM_REG_IRQENABLE_CLR,
+ MCPDM_UP_IRQ_EMPTY | MCPDM_UP_IRQ_FULL);
+
+ /* Disable DMA request generation for uplink */
+ omap_mcpdm_write(mcpdm, MCPDM_REG_DMAENABLE_CLR, MCPDM_DMA_UP_ENABLE);
+
+ /* Disable RX1/2 offset cancellation */
+ if (mcpdm->dn_rx_offset)
+ omap_mcpdm_write(mcpdm, MCPDM_REG_DN_OFFSET, 0);
+}
+
+static irqreturn_t omap_mcpdm_irq_handler(int irq, void *dev_id)
+{
+ struct omap_mcpdm *mcpdm = dev_id;
+ int irq_status;
+
+ irq_status = omap_mcpdm_read(mcpdm, MCPDM_REG_IRQSTATUS);
+
+ /* Acknowledge irq event */
+ omap_mcpdm_write(mcpdm, MCPDM_REG_IRQSTATUS, irq_status);
+
+ if (irq_status & MCPDM_DN_IRQ_FULL)
+ dev_dbg(mcpdm->dev, "DN (playback) FIFO Full\n");
+
+ if (irq_status & MCPDM_DN_IRQ_EMPTY)
+ dev_dbg(mcpdm->dev, "DN (playback) FIFO Empty\n");
+
+ if (irq_status & MCPDM_DN_IRQ)
+ dev_dbg(mcpdm->dev, "DN (playback) write request\n");
+
+ if (irq_status & MCPDM_UP_IRQ_FULL)
+ dev_dbg(mcpdm->dev, "UP (capture) FIFO Full\n");
+
+ if (irq_status & MCPDM_UP_IRQ_EMPTY)
+ dev_dbg(mcpdm->dev, "UP (capture) FIFO Empty\n");
+
+ if (irq_status & MCPDM_UP_IRQ)
+ dev_dbg(mcpdm->dev, "UP (capture) write request\n");
+
+ return IRQ_HANDLED;
+}
+
static int omap_mcpdm_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- int err = 0;
+ struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
- if (!dai->active)
- err = omap_mcpdm_request();
+ mutex_lock(&mcpdm->mutex);
- return err;
+ if (!dai->active) {
+ pm_runtime_get_sync(mcpdm->dev);
+
+ /* Enable watch dog for ES above ES 1.0 to avoid saturation */
+ if (omap_rev() != OMAP4430_REV_ES1_0) {
+ u32 ctrl = omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL);
+
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL,
+ ctrl | MCPDM_WD_EN);
+ }
+ omap_mcpdm_open_streams(mcpdm);
+ }
+
+ mutex_unlock(&mcpdm->mutex);
+
+ return 0;
}
static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- if (!dai->active)
- omap_mcpdm_free();
-}
-
-static int omap_mcpdm_dai_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
- struct omap_mcpdm_data *mcpdm_priv = snd_soc_dai_get_drvdata(dai);
- int stream = substream->stream;
- int err = 0;
+ struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (!mcpdm_priv->active++)
- omap_mcpdm_start(stream);
- break;
+ mutex_lock(&mcpdm->mutex);
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (!--mcpdm_priv->active)
- omap_mcpdm_stop(stream);
- break;
- default:
- err = -EINVAL;
+ if (!dai->active) {
+ if (omap_mcpdm_active(mcpdm)) {
+ omap_mcpdm_stop(mcpdm);
+ omap_mcpdm_close_streams(mcpdm);
+ }
+
+ if (!omap_mcpdm_active(mcpdm))
+ pm_runtime_put_sync(mcpdm->dev);
}
- return err;
+ mutex_unlock(&mcpdm->mutex);
}
static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct omap_mcpdm_data *mcpdm_priv = snd_soc_dai_get_drvdata(dai);
- struct omap_mcpdm_link *mcpdm_links = mcpdm_priv->links;
+ struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
int stream = substream->stream;
- int channels, err, link_mask = 0;
-
- snd_soc_dai_set_dma_data(dai, substream,
- &omap_mcpdm_dai_dma_params[stream]);
+ struct omap_pcm_dma_data *dma_data;
+ int channels;
+ int link_mask = 0;
channels = params_channels(params);
switch (channels) {
+ case 5:
+ if (stream == SNDRV_PCM_STREAM_CAPTURE)
+ /* up to 3 channels for capture */
+ return -EINVAL;
+ link_mask |= 1 << 4;
case 4:
if (stream == SNDRV_PCM_STREAM_CAPTURE)
- /* up to 2 channels for capture */
+ /* up to 3 channels for capture */
return -EINVAL;
link_mask |= 1 << 3;
case 3:
- if (stream == SNDRV_PCM_STREAM_CAPTURE)
- /* up to 2 channels for capture */
- return -EINVAL;
link_mask |= 1 << 2;
case 2:
link_mask |= 1 << 1;
@@ -164,95 +337,187 @@
return -EINVAL;
}
+ dma_data = &omap_mcpdm_dai_dma_params[stream];
+
+ /* Configure McPDM channels, and DMA packet size */
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
- mcpdm_links[stream].channels = link_mask << 3;
- err = omap_mcpdm_playback_open(&mcpdm_links[stream]);
+ mcpdm->dn_channels = link_mask << 3;
+ dma_data->packet_size =
+ (MCPDM_DN_THRES_MAX - mcpdm->dn_threshold) * channels;
} else {
- mcpdm_links[stream].channels = link_mask << 0;
- err = omap_mcpdm_capture_open(&mcpdm_links[stream]);
+ mcpdm->up_channels = link_mask << 0;
+ dma_data->packet_size = mcpdm->up_threshold * channels;
}
- return err;
+ snd_soc_dai_set_dma_data(dai, substream, dma_data);
+
+ return 0;
}
-static int omap_mcpdm_dai_hw_free(struct snd_pcm_substream *substream,
+static int omap_mcpdm_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- struct omap_mcpdm_data *mcpdm_priv = snd_soc_dai_get_drvdata(dai);
- struct omap_mcpdm_link *mcpdm_links = mcpdm_priv->links;
- int stream = substream->stream;
- int err;
+ struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- err = omap_mcpdm_playback_close(&mcpdm_links[stream]);
- else
- err = omap_mcpdm_capture_close(&mcpdm_links[stream]);
+ if (!omap_mcpdm_active(mcpdm)) {
+ omap_mcpdm_start(mcpdm);
+ omap_mcpdm_reg_dump(mcpdm);
+ }
- return err;
+ return 0;
}
static struct snd_soc_dai_ops omap_mcpdm_dai_ops = {
.startup = omap_mcpdm_dai_startup,
.shutdown = omap_mcpdm_dai_shutdown,
- .trigger = omap_mcpdm_dai_trigger,
.hw_params = omap_mcpdm_dai_hw_params,
- .hw_free = omap_mcpdm_dai_hw_free,
+ .prepare = omap_mcpdm_prepare,
};
-#define OMAP_MCPDM_RATES (SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-#define OMAP_MCPDM_FORMATS (SNDRV_PCM_FMTBIT_S32_LE)
-
-static int omap_mcpdm_dai_probe(struct snd_soc_dai *dai)
+static int omap_mcpdm_probe(struct snd_soc_dai *dai)
{
- snd_soc_dai_set_drvdata(dai, &mcpdm_data);
+ struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+ int ret;
+
+ pm_runtime_enable(mcpdm->dev);
+
+ /* Disable lines while request is ongoing */
+ pm_runtime_get_sync(mcpdm->dev);
+ omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, 0x00);
+
+ ret = request_irq(mcpdm->irq, omap_mcpdm_irq_handler,
+ 0, "McPDM", (void *)mcpdm);
+
+ pm_runtime_put_sync(mcpdm->dev);
+
+ if (ret) {
+ dev_err(mcpdm->dev, "Request for IRQ failed\n");
+ pm_runtime_disable(mcpdm->dev);
+ }
+
+ /* Configure McPDM threshold values */
+ mcpdm->dn_threshold = 2;
+ mcpdm->up_threshold = MCPDM_UP_THRES_MAX - 3;
+ return ret;
+}
+
+static int omap_mcpdm_remove(struct snd_soc_dai *dai)
+{
+ struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+
+ free_irq(mcpdm->irq, (void *)mcpdm);
+ pm_runtime_disable(mcpdm->dev);
+
return 0;
}
+#define OMAP_MCPDM_RATES (SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+#define OMAP_MCPDM_FORMATS SNDRV_PCM_FMTBIT_S32_LE
+
static struct snd_soc_dai_driver omap_mcpdm_dai = {
- .probe = omap_mcpdm_dai_probe,
+ .probe = omap_mcpdm_probe,
+ .remove = omap_mcpdm_remove,
+ .probe_order = SND_SOC_COMP_ORDER_LATE,
+ .remove_order = SND_SOC_COMP_ORDER_EARLY,
.playback = {
.channels_min = 1,
- .channels_max = 4,
+ .channels_max = 5,
.rates = OMAP_MCPDM_RATES,
.formats = OMAP_MCPDM_FORMATS,
},
.capture = {
.channels_min = 1,
- .channels_max = 2,
+ .channels_max = 3,
.rates = OMAP_MCPDM_RATES,
.formats = OMAP_MCPDM_FORMATS,
},
.ops = &omap_mcpdm_dai_ops,
};
+void omap_mcpdm_configure_dn_offsets(struct snd_soc_pcm_runtime *rtd,
+ u8 rx1, u8 rx2)
+{
+ struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+ mcpdm->dn_rx_offset = MCPDM_DNOFST_RX1(rx1) | MCPDM_DNOFST_RX2(rx2);
+}
+EXPORT_SYMBOL_GPL(omap_mcpdm_configure_dn_offsets);
+
static __devinit int asoc_mcpdm_probe(struct platform_device *pdev)
{
- int ret;
+ struct omap_mcpdm *mcpdm;
+ struct resource *res;
+ int ret = 0;
- ret = omap_mcpdm_probe(pdev);
- if (ret < 0)
- return ret;
+ mcpdm = kzalloc(sizeof(struct omap_mcpdm), GFP_KERNEL);
+ if (!mcpdm)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, mcpdm);
+
+ mutex_init(&mcpdm->mutex);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no resource\n");
+ goto err_res;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), "McPDM")) {
+ ret = -EBUSY;
+ goto err_res;
+ }
+
+ mcpdm->io_base = ioremap(res->start, resource_size(res));
+ if (!mcpdm->io_base) {
+ ret = -ENOMEM;
+ goto err_iomap;
+ }
+
+ mcpdm->irq = platform_get_irq(pdev, 0);
+ if (mcpdm->irq < 0) {
+ ret = mcpdm->irq;
+ goto err_irq;
+ }
+
+ mcpdm->dev = &pdev->dev;
+
ret = snd_soc_register_dai(&pdev->dev, &omap_mcpdm_dai);
- if (ret < 0)
- omap_mcpdm_remove(pdev);
+ if (!ret)
+ return 0;
+
+err_irq:
+ iounmap(mcpdm->io_base);
+err_iomap:
+ release_mem_region(res->start, resource_size(res));
+err_res:
+ kfree(mcpdm);
return ret;
}
static int __devexit asoc_mcpdm_remove(struct platform_device *pdev)
{
+ struct omap_mcpdm *mcpdm = platform_get_drvdata(pdev);
+ struct resource *res;
+
snd_soc_unregister_dai(&pdev->dev);
- omap_mcpdm_remove(pdev);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iounmap(mcpdm->io_base);
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(mcpdm);
return 0;
}
static struct platform_driver asoc_mcpdm_driver = {
.driver = {
- .name = "omap-mcpdm-dai",
- .owner = THIS_MODULE,
+ .name = "omap-mcpdm",
+ .owner = THIS_MODULE,
},
- .probe = asoc_mcpdm_probe,
- .remove = __devexit_p(asoc_mcpdm_remove),
+ .probe = asoc_mcpdm_probe,
+ .remove = __devexit_p(asoc_mcpdm_remove),
};
static int __init snd_omap_mcpdm_init(void)
@@ -267,6 +532,6 @@
}
module_exit(snd_omap_mcpdm_exit);
-MODULE_AUTHOR("Misael Lopez Cruz <x0052729@ti.com>");
+MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
MODULE_DESCRIPTION("OMAP PDM SoC Interface");
MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-mcpdm.h b/sound/soc/omap/omap-mcpdm.h
new file mode 100644
index 0000000..de8cf26
--- /dev/null
+++ b/sound/soc/omap/omap-mcpdm.h
@@ -0,0 +1,107 @@
+/*
+ * omap-mcpdm.h
+ *
+ * Copyright (C) 2009 - 2011 Texas Instruments
+ *
+ * Contact: Misael Lopez Cruz <misael.lopez@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __OMAP_MCPDM_H__
+#define __OMAP_MCPDM_H__
+
+#define MCPDM_REG_REVISION 0x00
+#define MCPDM_REG_SYSCONFIG 0x10
+#define MCPDM_REG_IRQSTATUS_RAW 0x24
+#define MCPDM_REG_IRQSTATUS 0x28
+#define MCPDM_REG_IRQENABLE_SET 0x2C
+#define MCPDM_REG_IRQENABLE_CLR 0x30
+#define MCPDM_REG_IRQWAKE_EN 0x34
+#define MCPDM_REG_DMAENABLE_SET 0x38
+#define MCPDM_REG_DMAENABLE_CLR 0x3C
+#define MCPDM_REG_DMAWAKEEN 0x40
+#define MCPDM_REG_CTRL 0x44
+#define MCPDM_REG_DN_DATA 0x48
+#define MCPDM_REG_UP_DATA 0x4C
+#define MCPDM_REG_FIFO_CTRL_DN 0x50
+#define MCPDM_REG_FIFO_CTRL_UP 0x54
+#define MCPDM_REG_DN_OFFSET 0x58
+
+/*
+ * MCPDM_IRQ bit fields
+ * IRQSTATUS_RAW, IRQSTATUS, IRQENABLE_SET, IRQENABLE_CLR
+ */
+
+#define MCPDM_DN_IRQ (1 << 0)
+#define MCPDM_DN_IRQ_EMPTY (1 << 1)
+#define MCPDM_DN_IRQ_ALMST_EMPTY (1 << 2)
+#define MCPDM_DN_IRQ_FULL (1 << 3)
+
+#define MCPDM_UP_IRQ (1 << 8)
+#define MCPDM_UP_IRQ_EMPTY (1 << 9)
+#define MCPDM_UP_IRQ_ALMST_FULL (1 << 10)
+#define MCPDM_UP_IRQ_FULL (1 << 11)
+
+#define MCPDM_DOWNLINK_IRQ_MASK 0x00F
+#define MCPDM_UPLINK_IRQ_MASK 0xF00
+
+/*
+ * MCPDM_DMAENABLE bit fields
+ */
+
+#define MCPDM_DMA_DN_ENABLE (1 << 0)
+#define MCPDM_DMA_UP_ENABLE (1 << 1)
+
+/*
+ * MCPDM_CTRL bit fields
+ */
+
+#define MCPDM_PDM_UPLINK_EN(x) (1 << (x - 1)) /* ch1 is at bit 0 */
+#define MCPDM_PDM_DOWNLINK_EN(x) (1 << (x + 2)) /* ch1 is at bit 3 */
+#define MCPDM_PDMOUTFORMAT (1 << 8)
+#define MCPDM_CMD_INT (1 << 9)
+#define MCPDM_STATUS_INT (1 << 10)
+#define MCPDM_SW_UP_RST (1 << 11)
+#define MCPDM_SW_DN_RST (1 << 12)
+#define MCPDM_WD_EN (1 << 14)
+#define MCPDM_PDM_UP_MASK 0x7
+#define MCPDM_PDM_DN_MASK (0x1f << 3)
+
+
+#define MCPDM_PDMOUTFORMAT_LJUST (0 << 8)
+#define MCPDM_PDMOUTFORMAT_RJUST (1 << 8)
+
+/*
+ * MCPDM_FIFO_CTRL bit fields
+ */
+
+#define MCPDM_UP_THRES_MAX 0xF
+#define MCPDM_DN_THRES_MAX 0xF
+
+/*
+ * MCPDM_DN_OFFSET bit fields
+ */
+
+#define MCPDM_DN_OFST_RX1_EN (1 << 0)
+#define MCPDM_DNOFST_RX1(x) ((x & 0x1f) << 1)
+#define MCPDM_DN_OFST_RX2_EN (1 << 8)
+#define MCPDM_DNOFST_RX2(x) ((x & 0x1f) << 9)
+
+void omap_mcpdm_configure_dn_offsets(struct snd_soc_pcm_runtime *rtd,
+ u8 rx1, u8 rx2);
+
+#endif /* End of __OMAP_MCPDM_H__ */
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 9b5c88a..5e37ec9 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -198,6 +198,14 @@
OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
else if (!substream->runtime->no_period_wakeup)
omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
+ else {
+ /*
+ * No period wakeup:
+ * we need to disable BLOCK_IRQ, which is enabled by the omap
+ * dma core at request dma time.
+ */
+ omap_disable_dma_irq(prtd->dma_ch, OMAP_DMA_BLOCK_IRQ);
+ }
if (!(cpu_class_is_omap1())) {
omap_set_dma_src_burst_mode(prtd->dma_ch,
diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
index 0daa044..bf9ae2a 100644
--- a/sound/soc/omap/omap3evm.c
+++ b/sound/soc/omap/omap3evm.c
@@ -36,29 +36,8 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int ret;
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "Can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "Can't set cpu DAI configuration\n");
- return ret;
- }
-
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
SND_SOC_CLOCK_IN);
@@ -82,6 +61,8 @@
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.ops = &omap3evm_ops,
};
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index 8047c521e..30a75b4 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -48,24 +48,8 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- int fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBS_CFS;
int ret;
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai, fmt);
- if (ret < 0) {
- pr_err(PREFIX "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
- if (ret < 0) {
- pr_err(PREFIX "can't set cpu DAI configuration\n");
- return ret;
- }
-
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
SND_SOC_CLOCK_IN);
@@ -189,10 +173,8 @@
if (ret < 0)
return ret;
- snd_soc_dapm_add_routes(dapm, omap3pandora_out_map,
+ return snd_soc_dapm_add_routes(dapm, omap3pandora_out_map,
ARRAY_SIZE(omap3pandora_out_map));
-
- return snd_soc_dapm_sync(dapm);
}
static int omap3pandora_in_init(struct snd_soc_pcm_runtime *rtd)
@@ -212,10 +194,8 @@
if (ret < 0)
return ret;
- snd_soc_dapm_add_routes(dapm, omap3pandora_in_map,
+ return snd_soc_dapm_add_routes(dapm, omap3pandora_in_map,
ARRAY_SIZE(omap3pandora_in_map));
-
- return snd_soc_dapm_sync(dapm);
}
static struct snd_soc_ops omap3pandora_ops = {
@@ -231,6 +211,8 @@
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
.ops = &omap3pandora_ops,
.init = omap3pandora_out_init,
}, {
@@ -240,6 +222,8 @@
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
.ops = &omap3pandora_ops,
.init = omap3pandora_in_init,
}
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index 7e75e77..db91cca 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -55,29 +55,8 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int err;
- /* Set codec DAI configuration */
- err = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (err < 0) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return err;
- }
-
- /* Set cpu DAI configuration */
- err = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (err < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return err;
- }
-
/* Set the codec system clock for DAC and ADC */
err =
snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, SND_SOC_CLOCK_IN);
@@ -112,27 +91,6 @@
{"MICIN", NULL, "Mic Jack"},
};
-static int osk_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- /* Add osk5912 specific widgets */
- snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets,
- ARRAY_SIZE(tlv320aic23_dapm_widgets));
-
- /* Set up osk5912 specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
- snd_soc_dapm_enable_pin(dapm, "Line In");
- snd_soc_dapm_enable_pin(dapm, "Mic Jack");
-
- snd_soc_dapm_sync(dapm);
-
- return 0;
-}
-
/* Digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link osk_dai = {
.name = "TLV320AIC23",
@@ -141,7 +99,8 @@
.codec_dai_name = "tlv320aic23-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "tlv320aic23-codec",
- .init = osk_tlv320aic23_init,
+ .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.ops = &osk_ops,
};
@@ -150,6 +109,11 @@
.name = "OSK5912",
.dai_link = &osk_dai,
.num_links = 1,
+
+ .dapm_widgets = tlv320aic23_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *osk_snd_device;
diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c
index bbcf380..739efe9 100644
--- a/sound/soc/omap/overo.c
+++ b/sound/soc/omap/overo.c
@@ -38,29 +38,8 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int ret;
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return ret;
- }
-
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
SND_SOC_CLOCK_IN);
@@ -84,6 +63,8 @@
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.ops = &overo_ops,
};
diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
index 893300a..a568423 100644
--- a/sound/soc/omap/rx51.c
+++ b/sound/soc/omap/rx51.c
@@ -115,24 +115,6 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- int err;
-
- /* Set codec DAI configuration */
- err = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_DSP_A |
- SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (err < 0)
- return err;
-
- /* Set cpu DAI configuration */
- err = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_DSP_A |
- SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (err < 0)
- return err;
/* Set the codec system clock for DAC and ADC */
return snd_soc_dai_set_sysclk(codec_dai, 0, 19200000,
@@ -335,8 +317,6 @@
if (err < 0)
return err;
- snd_soc_dapm_sync(dapm);
-
/* AV jack detection */
err = snd_soc_jack_new(codec, "AV Jack",
SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
@@ -377,6 +357,8 @@
.codec_dai_name = "tlv320aic3x-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "tlv320aic3x-codec.2-0018",
+ .dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.init = rx51_aic34_init,
.ops = &rx51_ops,
},
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 9f6a758..4f1969d 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -53,29 +53,8 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int ret;
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return ret;
- }
-
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
SND_SOC_CLOCK_IN);
@@ -91,49 +70,6 @@
.hw_params = sdp3430_hw_params,
};
-static int sdp3430_hw_voice_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- int ret;
-
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_DSP_A |
- SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_DSP_A |
- SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return ret;
- }
-
- /* Set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
- SND_SOC_CLOCK_IN);
- if (ret < 0) {
- printk(KERN_ERR "can't set codec system clock\n");
- return ret;
- }
-
- return 0;
-}
-
-static struct snd_soc_ops sdp3430_voice_ops = {
- .hw_params = sdp3430_hw_voice_params,
-};
-
/* Headset jack */
static struct snd_soc_jack hs_jack;
@@ -193,15 +129,6 @@
struct snd_soc_dapm_context *dapm = &codec->dapm;
int ret;
- /* Add SDP3430 specific widgets */
- ret = snd_soc_dapm_new_controls(dapm, sdp3430_twl4030_dapm_widgets,
- ARRAY_SIZE(sdp3430_twl4030_dapm_widgets));
- if (ret)
- return ret;
-
- /* Set up SDP3430 specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
/* SDP3430 connected pins */
snd_soc_dapm_enable_pin(dapm, "Ext Mic");
snd_soc_dapm_enable_pin(dapm, "Ext Spk");
@@ -223,10 +150,6 @@
snd_soc_dapm_nc_pin(dapm, "CARKITL");
snd_soc_dapm_nc_pin(dapm, "CARKITR");
- ret = snd_soc_dapm_sync(dapm);
- if (ret)
- return ret;
-
/* Headset jack detection */
ret = snd_soc_jack_new(codec, "Headset Jack",
SND_JACK_HEADSET, &hs_jack);
@@ -267,6 +190,8 @@
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.init = sdp3430_twl4030_init,
.ops = &sdp3430_ops,
},
@@ -277,8 +202,10 @@
.codec_dai_name = "twl4030-voice",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.init = sdp3430_twl4030_voice_init,
- .ops = &sdp3430_voice_ops,
+ .ops = &sdp3430_ops,
},
};
@@ -287,6 +214,11 @@
.name = "SDP3430",
.dai_link = sdp3430_dai,
.num_links = ARRAY_SIZE(sdp3430_dai),
+
+ .dapm_widgets = sdp3430_twl4030_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sdp3430_twl4030_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *sdp3430_snd_device;
diff --git a/sound/soc/omap/sdp4430.c b/sound/soc/omap/sdp4430.c
index b80efb02..cc3d792a 100644
--- a/sound/soc/omap/sdp4430.c
+++ b/sound/soc/omap/sdp4430.c
@@ -32,7 +32,7 @@
#include <plat/hardware.h>
#include <plat/mux.h>
-#include "mcpdm.h"
+#include "omap-mcpdm.h"
#include "omap-pcm.h"
#include "../codecs/twl6040.h"
@@ -88,7 +88,7 @@
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_HP("Headset Stereophone", NULL),
SND_SOC_DAPM_SPK("Earphone Spk", NULL),
- SND_SOC_DAPM_INPUT("Aux/FM Stereo In"),
+ SND_SOC_DAPM_INPUT("FM Stereo In"),
};
static const struct snd_soc_dapm_route audio_map[] = {
@@ -113,36 +113,22 @@
{"Earphone Spk", NULL, "EP"},
/* Aux/FM Stereo In: AFML, AFMR */
- {"AFML", NULL, "Aux/FM Stereo In"},
- {"AFMR", NULL, "Aux/FM Stereo In"},
+ {"AFML", NULL, "FM Stereo In"},
+ {"AFMR", NULL, "FM Stereo In"},
};
static int sdp4430_twl6040_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
- int ret;
+ int ret, hs_trim;
- /* Add SDP4430 specific widgets */
- ret = snd_soc_dapm_new_controls(dapm, sdp4430_twl6040_dapm_widgets,
- ARRAY_SIZE(sdp4430_twl6040_dapm_widgets));
- if (ret)
- return ret;
-
- /* Set up SDP4430 specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- /* SDP4430 connected pins */
- snd_soc_dapm_enable_pin(dapm, "Ext Mic");
- snd_soc_dapm_enable_pin(dapm, "Ext Spk");
- snd_soc_dapm_enable_pin(dapm, "AFML");
- snd_soc_dapm_enable_pin(dapm, "AFMR");
- snd_soc_dapm_enable_pin(dapm, "Headset Mic");
- snd_soc_dapm_enable_pin(dapm, "Headset Stereophone");
-
- ret = snd_soc_dapm_sync(dapm);
- if (ret)
- return ret;
+ /*
+ * Configure McPDM offset cancellation based on the HSOTRIM value from
+ * twl6040.
+ */
+ hs_trim = twl6040_get_trim_value(codec, TWL6040_TRIM_HSOTRIM);
+ omap_mcpdm_configure_dn_offsets(rtd, TWL6040_HSF_TRIM_LEFT(hs_trim),
+ TWL6040_HSF_TRIM_RIGHT(hs_trim));
/* Headset jack detection */
ret = snd_soc_jack_new(codec, "Headset Jack",
@@ -165,8 +151,8 @@
static struct snd_soc_dai_link sdp4430_dai = {
.name = "TWL6040",
.stream_name = "TWL6040",
- .cpu_dai_name ="omap-mcpdm-dai",
- .codec_dai_name = "twl6040-hifi",
+ .cpu_dai_name = "omap-mcpdm",
+ .codec_dai_name = "twl6040-legacy",
.platform_name = "omap-pcm-audio",
.codec_name = "twl6040-codec",
.init = sdp4430_twl6040_init,
@@ -178,6 +164,11 @@
.name = "SDP4430",
.dai_link = &sdp4430_dai,
.num_links = 1,
+
+ .dapm_widgets = sdp4430_twl6040_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sdp4430_twl6040_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *sdp4430_snd_device;
diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c
index 9a2666f..7cf35c8 100644
--- a/sound/soc/omap/zoom2.c
+++ b/sound/soc/omap/zoom2.c
@@ -44,29 +44,8 @@
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int ret;
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return ret;
- }
-
/* Set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
SND_SOC_CLOCK_IN);
@@ -82,49 +61,6 @@
.hw_params = zoom2_hw_params,
};
-static int zoom2_hw_voice_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- int ret;
-
- /* Set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_DSP_A |
- SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret) {
- printk(KERN_ERR "can't set codec DAI configuration\n");
- return ret;
- }
-
- /* Set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_DSP_A |
- SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0) {
- printk(KERN_ERR "can't set cpu DAI configuration\n");
- return ret;
- }
-
- /* Set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
- SND_SOC_CLOCK_IN);
- if (ret < 0) {
- printk(KERN_ERR "can't set codec system clock\n");
- return ret;
- }
-
- return 0;
-}
-
-static struct snd_soc_ops zoom2_voice_ops = {
- .hw_params = zoom2_hw_voice_params,
-};
-
/* Zoom2 machine DAPM */
static const struct snd_soc_dapm_widget zoom2_twl4030_dapm_widgets[] = {
SND_SOC_DAPM_MIC("Ext Mic", NULL),
@@ -162,23 +98,6 @@
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
- int ret;
-
- /* Add Zoom2 specific widgets */
- ret = snd_soc_dapm_new_controls(dapm, zoom2_twl4030_dapm_widgets,
- ARRAY_SIZE(zoom2_twl4030_dapm_widgets));
- if (ret)
- return ret;
-
- /* Set up Zoom2 specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- /* Zoom2 connected pins */
- snd_soc_dapm_enable_pin(dapm, "Ext Mic");
- snd_soc_dapm_enable_pin(dapm, "Ext Spk");
- snd_soc_dapm_enable_pin(dapm, "Headset Mic");
- snd_soc_dapm_enable_pin(dapm, "Headset Stereophone");
- snd_soc_dapm_enable_pin(dapm, "Aux In");
/* TWL4030 not connected pins */
snd_soc_dapm_nc_pin(dapm, "CARKITMIC");
@@ -190,9 +109,7 @@
snd_soc_dapm_nc_pin(dapm, "CARKITL");
snd_soc_dapm_nc_pin(dapm, "CARKITR");
- ret = snd_soc_dapm_sync(dapm);
-
- return ret;
+ return 0;
}
static int zoom2_twl4030_voice_init(struct snd_soc_pcm_runtime *rtd)
@@ -217,6 +134,8 @@
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.init = zoom2_twl4030_init,
.ops = &zoom2_ops,
},
@@ -227,8 +146,10 @@
.codec_dai_name = "twl4030-voice",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
.init = zoom2_twl4030_voice_init,
- .ops = &zoom2_voice_ops,
+ .ops = &zoom2_ops,
},
};
@@ -237,6 +158,11 @@
.name = "Zoom2",
.dai_link = zoom2_dai,
.num_links = ARRAY_SIZE(zoom2_dai),
+
+ .dapm_widgets = zoom2_twl4030_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(zoom2_twl4030_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *zoom2_snd_device;
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 33ebc46..ffd2242 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -121,6 +121,7 @@
config SND_SOC_SAARB
tristate "SoC Audio support for Marvell Saarb"
depends on SND_PXA2XX_SOC && MACH_SAARB
+ select MFD_88PM860X
select SND_PXA_SOC_SSP
select SND_SOC_88PM860X
help
@@ -130,6 +131,7 @@
config SND_SOC_TAVOREVB3
tristate "SoC Audio support for Marvell Tavor EVB3"
depends on SND_PXA2XX_SOC && MACH_TAVOREVB3
+ select MFD_88PM860X
select SND_PXA_SOC_SSP
select SND_SOC_88PM860X
help
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 28757fb..b0e2fb7 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -299,7 +299,6 @@
/* Set up corgi specific audio path audio_map */
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
return 0;
}
diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c
index dc65650a6..35ed7eb 100644
--- a/sound/soc/pxa/e740_wm9705.c
+++ b/sound/soc/pxa/e740_wm9705.c
@@ -108,8 +108,6 @@
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c
index 51897fc..ce5f0560 100644
--- a/sound/soc/pxa/e750_wm9705.c
+++ b/sound/soc/pxa/e750_wm9705.c
@@ -90,8 +90,6 @@
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 053ed20..6a8f38b 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -80,7 +80,6 @@
ARRAY_SIZE(e800_dapm_widgets));
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
return 0;
}
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index 67dcc36..e79f516 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -92,11 +92,10 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- unsigned int acps, acds, width, rate;
+ unsigned int acps, acds, width;
unsigned int div4 = PXA_SSP_CLK_SCDB_4;
int ret = 0;
- rate = params_rate(params);
width = snd_pcm_format_physical_width(params_format(params));
/*
@@ -424,7 +423,6 @@
/* Set up magician specific audio path interconnects */
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
return 0;
}
diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c
index 38ca675..0b8d1ee 100644
--- a/sound/soc/pxa/mioa701_wm9713.c
+++ b/sound/soc/pxa/mioa701_wm9713.c
@@ -151,7 +151,6 @@
snd_soc_dapm_enable_pin(dapm, "Front Mic");
snd_soc_dapm_enable_pin(dapm, "GSM Line In");
snd_soc_dapm_enable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_sync(dapm);
return 0;
}
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 504e4004..7edc1fb 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -107,10 +107,6 @@
snd_soc_dapm_nc_pin(dapm, "PHONE");
snd_soc_dapm_nc_pin(dapm, "MIC2");
- err = snd_soc_dapm_sync(dapm);
- if (err)
- return err;
-
/* Jack detection API stuff */
err = snd_soc_jack_new(codec, "Headphone Jack",
SND_JACK_HEADPHONE, &hs_jack);
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index da3ae43..4c29bc1 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -265,7 +265,6 @@
/* Set up poodle specific audio path audio_map */
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
return 0;
}
diff --git a/sound/soc/pxa/raumfeld.c b/sound/soc/pxa/raumfeld.c
index 1a591f1..b899a3b 100644
--- a/sound/soc/pxa/raumfeld.c
+++ b/sound/soc/pxa/raumfeld.c
@@ -306,8 +306,10 @@
&snd_soc_raumfeld_connector);
ret = platform_device_add(raumfeld_audio_device);
- if (ret < 0)
+ if (ret < 0) {
+ platform_device_put(raumfeld_audio_device);
return ret;
+ }
raumfeld_enable_audio(true);
return 0;
diff --git a/sound/soc/pxa/saarb.c b/sound/soc/pxa/saarb.c
index 9595189..d9467a2 100644
--- a/sound/soc/pxa/saarb.c
+++ b/sound/soc/pxa/saarb.c
@@ -146,10 +146,6 @@
snd_soc_dapm_disable_pin(dapm, "Headset Mic 2");
snd_soc_dapm_disable_pin(dapm, "Headset Stereophone");
- ret = snd_soc_dapm_sync(dapm);
- if (ret)
- return ret;
-
/* Headset jack detection */
snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE
| SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2,
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index b253d86..c2d6ff9 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -301,7 +301,6 @@
/* Set up spitz specific audio paths */
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
return 0;
}
@@ -312,7 +311,7 @@
.cpu_dai_name = "pxa2xx-i2s",
.codec_dai_name = "wm8750-hifi",
.platform_name = "pxa-pcm-audio",
- .codec_name = "wm8750-codec.0-001b",
+ .codec_name = "wm8750.0-001b",
.init = spitz_wm8750_init,
.ops = &spitz_ops,
};
diff --git a/sound/soc/pxa/tavorevb3.c b/sound/soc/pxa/tavorevb3.c
index f881f65..eeec892 100644
--- a/sound/soc/pxa/tavorevb3.c
+++ b/sound/soc/pxa/tavorevb3.c
@@ -146,10 +146,6 @@
snd_soc_dapm_disable_pin(dapm, "Headset Mic 2");
snd_soc_dapm_disable_pin(dapm, "Headset Stereophone");
- ret = snd_soc_dapm_sync(dapm);
- if (ret)
- return ret;
-
/* Headset jack detection */
snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE
| SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2,
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 9a23513..620fc69 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -211,7 +211,6 @@
/* set up tosa specific audio path audio_map */
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
return 0;
}
diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c
index d69d9fc..b311ffe 100644
--- a/sound/soc/pxa/z2.c
+++ b/sound/soc/pxa/z2.c
@@ -161,10 +161,6 @@
/* Set up z2 specific audio paths */
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- ret = snd_soc_dapm_sync(dapm);
- if (ret)
- goto err;
-
/* Jack detection API stuff */
ret = snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET,
&hs_jack);
@@ -198,7 +194,7 @@
.cpu_dai_name = "pxa2xx-i2s",
.codec_dai_name = "wm8750-hifi",
.platform_name = "pxa-pcm-audio",
- .codec_name = "wm8750-codec.0-001b",
+ .codec_name = "wm8750.0-001b",
.init = z2_wm8750_init,
.ops = &z2_ops,
};
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index 2b8350b..580aae3 100644
--- a/sound/soc/pxa/zylonite.c
+++ b/sound/soc/pxa/zylonite.c
@@ -87,7 +87,6 @@
snd_soc_dapm_enable_pin(dapm, "Headphone");
snd_soc_dapm_enable_pin(dapm, "Headset Earpiece");
- snd_soc_dapm_sync(dapm);
return 0;
}
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
index 80c85fd6..55efc2b 100644
--- a/sound/soc/s6000/s6000-pcm.c
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -446,7 +446,6 @@
static int s6000_pcm_new(struct snd_soc_pcm_runtime *runtime)
{
struct snd_card *card = runtime->card->snd_card;
- struct snd_soc_dai *dai = runtime->cpu_dai;
struct snd_pcm *pcm = runtime->pcm;
struct s6000_pcm_dma_params *params;
int res;
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 65f980e..53aaa69 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -63,7 +63,9 @@
config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 || MACH_SMDK4212)
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_WM8994
select SND_SOC_WM8994
select SND_SAMSUNG_I2S
help
@@ -150,7 +152,9 @@
config SND_SOC_GONI_AQUILA_WM8994
tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
+ depends on I2C=y && GENERIC_HARDIRQS
select SND_SAMSUNG_I2S
+ select MFD_WM8994
select SND_SOC_WM8994
help
Say Y if you want to add support for SoC audio on goni or aquila
@@ -158,7 +162,7 @@
config SND_SOC_SAMSUNG_SMDK_SPDIF
tristate "SoC S/PDIF Audio support for SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210 || MACH_SMDKV310)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210 || MACH_SMDKV310 || MACH_SMDK4212)
select SND_SAMSUNG_SPDIF
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
@@ -173,7 +177,9 @@
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDKC210 || MACH_SMDKV310)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDKC210 || MACH_SMDKV310 || MACH_SMDK4212)
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_WM8994
select SND_SOC_WM8994
select SND_SAMSUNG_PCM
help
diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
index f97110e..b5e922f 100644
--- a/sound/soc/samsung/ac97.c
+++ b/sound/soc/samsung/ac97.c
@@ -444,7 +444,7 @@
}
ret = request_irq(irq_res->start, s3c_ac97_irq,
- IRQF_DISABLED, "AC97", NULL);
+ 0, "AC97", NULL);
if (ret < 0) {
dev_err(&pdev->dev, "ac97: interrupt request failed.\n");
goto err4;
@@ -495,7 +495,7 @@
static struct platform_driver s3c_ac97_driver = {
.probe = s3c_ac97_probe,
- .remove = s3c_ac97_remove,
+ .remove = __devexit_p(s3c_ac97_remove),
.driver = {
.name = "samsung-ac97",
.owner = THIS_MODULE,
diff --git a/sound/soc/samsung/goni_wm8994.c b/sound/soc/samsung/goni_wm8994.c
index eb6d72e..4a34f60 100644
--- a/sound/soc/samsung/goni_wm8994.c
+++ b/sound/soc/samsung/goni_wm8994.c
@@ -99,14 +99,6 @@
struct snd_soc_dapm_context *dapm = &codec->dapm;
int ret;
- /* add goni specific widgets */
- snd_soc_dapm_new_controls(dapm, goni_dapm_widgets,
- ARRAY_SIZE(goni_dapm_widgets));
-
- /* set up goni specific audio routes */
- snd_soc_dapm_add_routes(dapm, goni_dapm_routes,
- ARRAY_SIZE(goni_dapm_routes));
-
/* set endpoints to not connected */
snd_soc_dapm_nc_pin(dapm, "IN2LP:VXRN");
snd_soc_dapm_nc_pin(dapm, "IN2RP:VXRP");
@@ -120,8 +112,6 @@
snd_soc_dapm_nc_pin(dapm, "SPKOUTRP");
}
- snd_soc_dapm_sync(dapm);
-
/* Headset jack detection */
ret = snd_soc_jack_new(codec, "Headset Jack",
SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT,
@@ -255,6 +245,11 @@
.name = "goni",
.dai_link = goni_dai,
.num_links = ARRAY_SIZE(goni_dai),
+
+ .dapm_widgets = goni_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(goni_dapm_widgets),
+ .dapm_routes = goni_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(goni_dapm_routes),
};
static int __init goni_init(void)
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index c6c6589..f75a4b6 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -182,24 +182,10 @@
struct snd_soc_dapm_context *dapm = &codec->dapm;
int err;
- /* Add h1940 specific widgets */
- err = snd_soc_dapm_new_controls(dapm, uda1380_dapm_widgets,
- ARRAY_SIZE(uda1380_dapm_widgets));
- if (err)
- return err;
-
- /* Set up h1940 specific audio path audio_mapnects */
- err = snd_soc_dapm_add_routes(dapm, audio_map,
- ARRAY_SIZE(audio_map));
- if (err)
- return err;
-
snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
snd_soc_dapm_enable_pin(dapm, "Speaker");
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
- snd_soc_dapm_sync(dapm);
-
snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
&hp_jack);
@@ -230,6 +216,11 @@
.name = "h1940",
.dai_link = h1940_uda1380_dai,
.num_links = ARRAY_SIZE(h1940_uda1380_dai),
+
+ .dapm_widgets = uda1380_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static int __init h1940_init(void)
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index c086b78..0c9ac20 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -1136,7 +1136,7 @@
static struct platform_driver samsung_i2s_driver = {
.probe = samsung_i2s_probe,
- .remove = samsung_i2s_remove,
+ .remove = __devexit_p(samsung_i2s_remove),
.driver = {
.name = "samsung-i2s",
.owner = THIS_MODULE,
diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c
index 14eb6ea..f5f7c6f 100644
--- a/sound/soc/samsung/jive_wm8750.c
+++ b/sound/soc/samsung/jive_wm8750.c
@@ -110,18 +110,6 @@
snd_soc_dapm_nc_pin(dapm, "OUT3");
snd_soc_dapm_nc_pin(dapm, "MONO");
- /* Add jive specific widgets */
- err = snd_soc_dapm_new_controls(dapm, wm8750_dapm_widgets,
- ARRAY_SIZE(wm8750_dapm_widgets));
- if (err) {
- printk(KERN_ERR "%s: failed to add widgets (%d)\n",
- __func__, err);
- return err;
- }
-
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_dapm_sync(dapm);
-
return 0;
}
@@ -131,7 +119,7 @@
.cpu_dai_name = "s3c2412-i2s",
.codec_dai_name = "wm8750-hifi",
.platform_name = "samsung-audio",
- .codec_name = "wm8750-codec.0-001a",
+ .codec_name = "wm8750.0-001a",
.init = jive_wm8750_init,
.ops = &jive_ops,
};
@@ -141,6 +129,11 @@
.name = "Jive",
.dai_link = &jive_dai,
.num_links = 1,
+
+ .dapm_widgtets = wm8750_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static struct platform_device *jive_snd_device;
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 16152ed..7207189 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -367,8 +367,6 @@
return ret;
}
- snd_soc_dapm_sync(dapm);
-
return 0;
}
@@ -409,8 +407,6 @@
snd_soc_dapm_ignore_suspend(dapm, "Handset Spk");
snd_soc_dapm_ignore_suspend(dapm, "Headphone");
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index 9c7e8b4..e55d7a5 100644
--- a/sound/soc/samsung/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -624,7 +624,7 @@
static struct platform_driver s3c_pcm_driver = {
.probe = s3c_pcm_dev_probe,
- .remove = s3c_pcm_dev_remove,
+ .remove = __devexit_p(s3c_pcm_dev_remove),
.driver = {
.name = "samsung-pcm",
.owner = THIS_MODULE,
diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
index bc8c167..aea7f1b 100644
--- a/sound/soc/samsung/rx1950_uda1380.c
+++ b/sound/soc/samsung/rx1950_uda1380.c
@@ -90,12 +90,6 @@
},
};
-static struct snd_soc_card rx1950_asoc = {
- .name = "rx1950",
- .dai_link = rx1950_uda1380_dai,
- .num_links = ARRAY_SIZE(rx1950_uda1380_dai),
-};
-
/* rx1950 machine dapm widgets */
static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
@@ -117,6 +111,17 @@
{"VINM", NULL, "Mic Jack"},
};
+static struct snd_soc_card rx1950_asoc = {
+ .name = "rx1950",
+ .dai_link = rx1950_uda1380_dai,
+ .num_links = ARRAY_SIZE(rx1950_uda1380_dai),
+
+ .dapm_widgets = uda1380_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
+};
+
static struct platform_device *s3c24xx_snd_device;
static int rx1950_startup(struct snd_pcm_substream *substream)
@@ -220,26 +225,10 @@
struct snd_soc_dapm_context *dapm = &codec->dapm;
int err;
- /* Add rx1950 specific widgets */
- err = snd_soc_dapm_new_controls(dapm, uda1380_dapm_widgets,
- ARRAY_SIZE(uda1380_dapm_widgets));
-
- if (err)
- return err;
-
- /* Set up rx1950 specific audio path audio_mapnects */
- err = snd_soc_dapm_add_routes(dapm, audio_map,
- ARRAY_SIZE(audio_map));
-
- if (err)
- return err;
-
snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
snd_soc_dapm_enable_pin(dapm, "Speaker");
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
- snd_soc_dapm_sync(dapm);
-
snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
&hp_jack);
diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index 52074a2b..7a73380 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -16,6 +16,7 @@
* option) any later version.
*/
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
index 841ab14..f26a8bf 100644
--- a/sound/soc/samsung/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -69,10 +69,10 @@
s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out;
s3c2412_i2s.iis_cclk = clk_get(dai->dev, "i2sclk");
- if (s3c2412_i2s.iis_cclk == NULL) {
+ if (IS_ERR(s3c2412_i2s.iis_cclk)) {
pr_err("failed to get i2sclk clock\n");
iounmap(s3c2412_i2s.regs);
- return -ENODEV;
+ return PTR_ERR(s3c2412_i2s.iis_cclk);
}
/* Set MPLL as the source for IIS CLK */
@@ -176,7 +176,7 @@
static struct platform_driver s3c2412_iis_driver = {
.probe = s3c2412_iis_dev_probe,
- .remove = s3c2412_iis_dev_remove,
+ .remove = __devexit_p(s3c2412_iis_dev_remove),
.driver = {
.name = "s3c2412-iis",
.owner = THIS_MODULE,
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
index 63d8849..c08117e 100644
--- a/sound/soc/samsung/s3c24xx-i2s.c
+++ b/sound/soc/samsung/s3c24xx-i2s.c
@@ -383,10 +383,10 @@
return -ENXIO;
s3c24xx_i2s.iis_clk = clk_get(dai->dev, "iis");
- if (s3c24xx_i2s.iis_clk == NULL) {
+ if (IS_ERR(s3c24xx_i2s.iis_clk)) {
pr_err("failed to get iis_clock\n");
iounmap(s3c24xx_i2s.regs);
- return -ENODEV;
+ return PTR_ERR(s3c24xx_i2s.iis_clk);
}
clk_enable(s3c24xx_i2s.iis_clk);
@@ -481,7 +481,7 @@
static struct platform_driver s3c24xx_iis_driver = {
.probe = s3c24xx_iis_dev_probe,
- .remove = s3c24xx_iis_dev_remove,
+ .remove = __devexit_p(s3c24xx_iis_dev_remove),
.driver = {
.name = "s3c24xx-iis",
.owner = THIS_MODULE,
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
index 349566f..c8d525b 100644
--- a/sound/soc/samsung/s3c24xx_simtec.c
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -300,7 +300,7 @@
}
#ifdef CONFIG_PM
-int simtec_audio_resume(struct device *dev)
+static int simtec_audio_resume(struct device *dev)
{
simtec_call_startup(pdata);
return 0;
diff --git a/sound/soc/samsung/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c
index ce6aef6..6bc5a36 100644
--- a/sound/soc/samsung/s3c24xx_simtec_hermes.c
+++ b/sound/soc/samsung/s3c24xx_simtec_hermes.c
@@ -65,18 +65,12 @@
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
- snd_soc_dapm_new_controls(dapm, dapm_widgets,
- ARRAY_SIZE(dapm_widgets));
-
- snd_soc_dapm_add_routes(dapm, base_map, ARRAY_SIZE(base_map));
-
snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
snd_soc_dapm_enable_pin(dapm, "Line In");
snd_soc_dapm_enable_pin(dapm, "Line Out");
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
simtec_audio_init(rtd);
- snd_soc_dapm_sync(dapm);
return 0;
}
@@ -96,6 +90,11 @@
.name = "Simtec-Hermes",
.dai_link = &simtec_dai_aic33,
.num_links = 1,
+
+ .dapm_widgets = dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
+ .dapm_routes = base_map,
+ .num_dapm_routes = ARRAY_SIZE(base_map),
};
static int __devinit simtec_audio_hermes_probe(struct platform_device *pd)
diff --git a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
index a7ef7db..7bdda76 100644
--- a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
+++ b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
@@ -54,18 +54,12 @@
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
- snd_soc_dapm_new_controls(dapm, dapm_widgets,
- ARRAY_SIZE(dapm_widgets));
-
- snd_soc_dapm_add_routes(dapm, base_map, ARRAY_SIZE(base_map));
-
snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
snd_soc_dapm_enable_pin(dapm, "Line In");
snd_soc_dapm_enable_pin(dapm, "Line Out");
snd_soc_dapm_enable_pin(dapm, "Mic Jack");
simtec_audio_init(rtd);
- snd_soc_dapm_sync(dapm);
return 0;
}
@@ -85,6 +79,11 @@
.name = "Simtec",
.dai_link = &simtec_dai_aic23,
.num_links = 1,
+
+ .dapm_widgets = dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
+ .dapm_routes = base_map,
+ .num_dapm_routes = ARRAY_SIZE(base_map),
};
static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd)
diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c
index dc9d551..65c1cfd 100644
--- a/sound/soc/samsung/s3c24xx_uda134x.c
+++ b/sound/soc/samsung/s3c24xx_uda134x.c
@@ -66,17 +66,17 @@
pr_debug("%s %d\n", __func__, clk_users);
if (clk_users == 0) {
xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
- if (!xtal) {
+ if (IS_ERR(xtal)) {
printk(KERN_ERR "%s cannot get xtal\n", __func__);
- ret = -EBUSY;
+ ret = PTR_ERR(xtal);
} else {
pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
"pclk");
- if (!pclk) {
+ if (IS_ERR(pclk)) {
printk(KERN_ERR "%s cannot get pclk\n",
__func__);
clk_put(xtal);
- ret = -EBUSY;
+ ret = PTR_ERR(pclk);
}
}
if (!ret) {
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
index 0a2c4f2..6ac6bc2 100644
--- a/sound/soc/samsung/smartq_wm8987.c
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -153,20 +153,6 @@
struct snd_soc_dapm_context *dapm = &codec->dapm;
int err = 0;
- /* Add SmartQ specific widgets */
- snd_soc_dapm_new_controls(dapm, wm8987_dapm_widgets,
- ARRAY_SIZE(wm8987_dapm_widgets));
-
- /* add SmartQ specific controls */
- err = snd_soc_add_controls(codec, wm8987_smartq_controls,
- ARRAY_SIZE(wm8987_smartq_controls));
-
- if (err < 0)
- return err;
-
- /* setup SmartQ specific audio path */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
/* set endpoints to not connected */
snd_soc_dapm_nc_pin(dapm, "LINPUT1");
snd_soc_dapm_nc_pin(dapm, "RINPUT1");
@@ -178,10 +164,6 @@
snd_soc_dapm_enable_pin(dapm, "Internal Mic");
snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
- err = snd_soc_dapm_sync(dapm);
- if (err)
- return err;
-
/* Headphone jack detection */
err = snd_soc_jack_new(codec, "Headphone Jack",
SND_JACK_HEADPHONE, &smartq_jack);
@@ -207,7 +189,7 @@
.cpu_dai_name = "samsung-i2s.0",
.codec_dai_name = "wm8750-hifi",
.platform_name = "samsung-audio",
- .codec_name = "wm8750-codec.0-0x1a",
+ .codec_name = "wm8750.0-0x1a",
.init = smartq_wm8987_init,
.ops = &smartq_hifi_ops,
},
@@ -217,6 +199,13 @@
.name = "SmartQ",
.dai_link = smartq_dai,
.num_links = ARRAY_SIZE(smartq_dai),
+
+ .dapm_widgets = wm8987_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm8987_dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
+ .controls = wm8987_smartq_controls,
+ .num_controls = ARRAY_SIZE(wm8987_smartq_controls),
};
static struct platform_device *smartq_snd_device;
diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c
index 3d26f66..8f92ffce 100644
--- a/sound/soc/samsung/smdk_wm8580.c
+++ b/sound/soc/samsung/smdk_wm8580.c
@@ -119,30 +119,24 @@
};
/* SMDK Playback widgets */
-static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = {
+static const struct snd_soc_dapm_widget smdk_wm8580_dapm_widgets[] = {
SND_SOC_DAPM_HP("Front", NULL),
SND_SOC_DAPM_HP("Center+Sub", NULL),
SND_SOC_DAPM_HP("Rear", NULL),
-};
-/* SMDK Capture widgets */
-static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = {
SND_SOC_DAPM_MIC("MicIn", NULL),
SND_SOC_DAPM_LINE("LineIn", NULL),
};
/* SMDK-PAIFTX connections */
-static const struct snd_soc_dapm_route audio_map_tx[] = {
+static const struct snd_soc_dapm_route smdk_wm8580_audio_map[] = {
/* MicIn feeds AINL */
{"AINL", NULL, "MicIn"},
/* LineIn feeds AINL/R */
{"AINL", NULL, "LineIn"},
{"AINR", NULL, "LineIn"},
-};
-/* SMDK-PAIFRX connections */
-static const struct snd_soc_dapm_route audio_map_rx[] = {
/* Front Left/Right are fed VOUT1L/R */
{"Front", NULL, "VOUT1L"},
{"Front", NULL, "VOUT1R"},
@@ -161,39 +155,11 @@
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
- /* Add smdk specific Capture widgets */
- snd_soc_dapm_new_controls(dapm, wm8580_dapm_widgets_cpt,
- ARRAY_SIZE(wm8580_dapm_widgets_cpt));
-
- /* Set up PAIFTX audio path */
- snd_soc_dapm_add_routes(dapm, audio_map_tx, ARRAY_SIZE(audio_map_tx));
-
/* Enabling the microphone requires the fitting of a 0R
* resistor to connect the line from the microphone jack.
*/
snd_soc_dapm_disable_pin(dapm, "MicIn");
- /* signal a DAPM event */
- snd_soc_dapm_sync(dapm);
-
- return 0;
-}
-
-static int smdk_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- /* Add smdk specific Playback widgets */
- snd_soc_dapm_new_controls(dapm, wm8580_dapm_widgets_pbk,
- ARRAY_SIZE(wm8580_dapm_widgets_pbk));
-
- /* Set up PAIFRX audio path */
- snd_soc_dapm_add_routes(dapm, audio_map_rx, ARRAY_SIZE(audio_map_rx));
-
- /* signal a DAPM event */
- snd_soc_dapm_sync(dapm);
-
return 0;
}
@@ -210,8 +176,7 @@
.cpu_dai_name = "samsung-i2s.0",
.codec_dai_name = "wm8580-hifi-playback",
.platform_name = "samsung-audio",
- .codec_name = "wm8580-codec.0-001b",
- .init = smdk_wm8580_init_paifrx,
+ .codec_name = "wm8580.0-001b",
.ops = &smdk_ops,
},
[PRI_CAPTURE] = { /* Primary Capture i/f */
@@ -220,7 +185,7 @@
.cpu_dai_name = "samsung-i2s.0",
.codec_dai_name = "wm8580-hifi-capture",
.platform_name = "samsung-audio",
- .codec_name = "wm8580-codec.0-001b",
+ .codec_name = "wm8580.0-001b",
.init = smdk_wm8580_init_paiftx,
.ops = &smdk_ops,
},
@@ -230,8 +195,7 @@
.cpu_dai_name = "samsung-i2s.x",
.codec_dai_name = "wm8580-hifi-playback",
.platform_name = "samsung-audio",
- .codec_name = "wm8580-codec.0-001b",
- .init = smdk_wm8580_init_paifrx,
+ .codec_name = "wm8580.0-001b",
.ops = &smdk_ops,
},
};
@@ -240,6 +204,11 @@
.name = "SMDK-I2S",
.dai_link = smdk_dai,
.num_links = 2,
+
+ .dapm_widgets = smdk_wm8580_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(smdk_wm8580_dapm_widgets),
+ .dapm_routes = smdk_wm8580_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(smdk_wm8580_audio_map),
};
static struct platform_device *smdk_snd_device;
diff --git a/sound/soc/samsung/smdk_wm8580pcm.c b/sound/soc/samsung/smdk_wm8580pcm.c
index 0d12092..4b9c734 100644
--- a/sound/soc/samsung/smdk_wm8580pcm.c
+++ b/sound/soc/samsung/smdk_wm8580pcm.c
@@ -127,7 +127,7 @@
.cpu_dai_name = "samsung-pcm.0",
.codec_dai_name = "wm8580-hifi-playback",
.platform_name = "samsung-audio",
- .codec_name = "wm8580-codec.0-001b",
+ .codec_name = "wm8580.0-001b",
.ops = &smdk_wm8580_pcm_ops,
}, {
.name = "WM8580 PAIF PCM TX",
@@ -135,7 +135,7 @@
.cpu_dai_name = "samsung-pcm.0",
.codec_dai_name = "wm8580-hifi-capture",
.platform_name = "samsung-audio",
- .codec_name = "wm8580-codec.0-001b",
+ .codec_name = "wm8580.0-001b",
.ops = &smdk_wm8580_pcm_ops,
},
};
diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c
index 45fbe2b..f75e439 100644
--- a/sound/soc/samsung/smdk_wm8994.c
+++ b/sound/soc/samsung/smdk_wm8994.c
@@ -117,8 +117,6 @@
snd_soc_dapm_nc_pin(dapm, "IN1RP");
snd_soc_dapm_nc_pin(dapm, "IN2RP:VXRP");
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c
index 28c491d..3122f31 100644
--- a/sound/soc/samsung/spdif.c
+++ b/sound/soc/samsung/spdif.c
@@ -340,7 +340,7 @@
.shutdown = spdif_shutdown,
};
-struct snd_soc_dai_driver samsung_spdif_dai = {
+static struct snd_soc_dai_driver samsung_spdif_dai = {
.name = "samsung-spdif",
.playback = {
.stream_name = "S/PDIF Playback",
@@ -475,7 +475,7 @@
static struct platform_driver samsung_spdif_driver = {
.probe = spdif_probe,
- .remove = spdif_remove,
+ .remove = __devexit_p(spdif_remove),
.driver = {
.name = "samsung-spdif",
.owner = THIS_MODULE,
diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c
index 590e927..b9e213f 100644
--- a/sound/soc/samsung/speyside.c
+++ b/sound/soc/samsung/speyside.c
@@ -125,10 +125,6 @@
.pin = "Headset Mic",
.mask = SND_JACK_MICROPHONE,
},
- {
- .pin = "Headphone",
- .mask = SND_JACK_HEADPHONE,
- },
};
/* Default the headphone selection to active high */
@@ -171,7 +167,8 @@
gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
ret = snd_soc_jack_new(codec, "Headset",
- SND_JACK_HEADSET | SND_JACK_BTN_0,
+ SND_JACK_LINEOUT | SND_JACK_HEADSET |
+ SND_JACK_BTN_0,
&speyside_headset);
if (ret)
return ret;
@@ -227,7 +224,7 @@
snd_soc_dapm_nc_pin(dapm, "LINEOUT");
/* At any time the WM9081 is active it will have this clock */
- return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK,
+ return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK, 0,
48000 * 256, 0);
}
@@ -252,6 +249,7 @@
SOC_DAPM_PIN_SWITCH("Main AMIC"),
SOC_DAPM_PIN_SWITCH("WM1250 Input"),
SOC_DAPM_PIN_SWITCH("WM1250 Output"),
+ SOC_DAPM_PIN_SWITCH("Headphone"),
};
static struct snd_soc_dapm_widget widgets[] = {
diff --git a/sound/soc/samsung/speyside_wm8962.c b/sound/soc/samsung/speyside_wm8962.c
index 72535f2..8a08204 100644
--- a/sound/soc/samsung/speyside_wm8962.c
+++ b/sound/soc/samsung/speyside_wm8962.c
@@ -16,6 +16,8 @@
#include "../codecs/wm8962.h"
+static int sample_rate = 44100;
+
static int speyside_wm8962_set_bias_level(struct snd_soc_card *card,
struct snd_soc_dapm_context *dapm,
enum snd_soc_bias_level level)
@@ -31,13 +33,13 @@
if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
WM8962_FLL_MCLK, 32768,
- 44100 * 256);
+ sample_rate * 512);
if (ret < 0)
pr_err("Failed to start FLL: %d\n", ret);
ret = snd_soc_dai_set_sysclk(codec_dai,
WM8962_SYSCLK_FLL,
- 44100 * 256,
+ sample_rate * 512,
SND_SOC_CLOCK_IN);
if (ret < 0) {
pr_err("Failed to set SYSCLK: %d\n", ret);
@@ -92,22 +94,7 @@
static int speyside_wm8962_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- int ret;
-
- ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
- | SND_SOC_DAIFMT_NB_NF
- | SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
- | SND_SOC_DAIFMT_NB_NF
- | SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
+ sample_rate = params_rate(params);
return 0;
}
@@ -124,12 +111,15 @@
.codec_dai_name = "wm8962",
.platform_name = "samsung-audio",
.codec_name = "wm8962.1-001a",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM,
.ops = &speyside_wm8962_ops,
},
};
static const struct snd_kcontrol_new controls[] = {
SOC_DAPM_PIN_SWITCH("Main Speaker"),
+ SOC_DAPM_PIN_SWITCH("DMIC"),
};
static struct snd_soc_dapm_widget widgets[] = {
@@ -137,6 +127,7 @@
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("DMIC", NULL),
+ SND_SOC_DAPM_MIC("AMIC", NULL),
SND_SOC_DAPM_SPK("Main Speaker", NULL),
};
@@ -148,12 +139,16 @@
{ "Main Speaker", NULL, "SPKOUTL" },
{ "Main Speaker", NULL, "SPKOUTR" },
- { "MICBIAS", NULL, "Headset Mic" },
- { "IN4L", NULL, "MICBIAS" },
- { "IN4R", NULL, "MICBIAS" },
+ { "Headset Mic", NULL, "MICBIAS" },
+ { "IN4L", NULL, "Headset Mic" },
+ { "IN4R", NULL, "Headset Mic" },
- { "MICBIAS", NULL, "DMIC" },
- { "DMICDAT", NULL, "MICBIAS" },
+ { "AMIC", NULL, "MICBIAS" },
+ { "IN1L", NULL, "AMIC" },
+ { "IN1R", NULL, "AMIC" },
+
+ { "DMIC", NULL, "MICBIAS" },
+ { "DMICDAT", NULL, "DMIC" },
};
static struct snd_soc_jack speyside_wm8962_headset;
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 8e112cc..a32fd16 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -210,7 +210,7 @@
* basic read write function
*/
-static void __fsi_reg_write(u32 reg, u32 data)
+static void __fsi_reg_write(u32 __iomem *reg, u32 data)
{
/* valid data area is 24bit */
data &= 0x00ffffff;
@@ -218,12 +218,12 @@
__raw_writel(data, reg);
}
-static u32 __fsi_reg_read(u32 reg)
+static u32 __fsi_reg_read(u32 __iomem *reg)
{
return __raw_readl(reg);
}
-static void __fsi_reg_mask_set(u32 reg, u32 mask, u32 data)
+static void __fsi_reg_mask_set(u32 __iomem *reg, u32 mask, u32 data)
{
u32 val = __fsi_reg_read(reg);
@@ -250,7 +250,7 @@
unsigned long flags;
spin_lock_irqsave(&master->lock, flags);
- ret = __fsi_reg_read((u32)(master->base + reg));
+ ret = __fsi_reg_read(master->base + reg);
spin_unlock_irqrestore(&master->lock, flags);
return ret;
@@ -264,7 +264,7 @@
unsigned long flags;
spin_lock_irqsave(&master->lock, flags);
- __fsi_reg_mask_set((u32)(master->base + reg), mask, data);
+ __fsi_reg_mask_set(master->base + reg, mask, data);
spin_unlock_irqrestore(&master->lock, flags);
}
@@ -1285,7 +1285,7 @@
pm_runtime_enable(&pdev->dev);
dev_set_drvdata(&pdev->dev, master);
- ret = request_irq(irq, &fsi_interrupt, IRQF_DISABLED,
+ ret = request_irq(irq, &fsi_interrupt, 0,
id_entry->name, master);
if (ret) {
dev_err(&pdev->dev, "irq request err\n");
diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c
index 917d3ce..c62ae68 100644
--- a/sound/soc/sh/sh7760-ac97.c
+++ b/sound/soc/sh/sh7760-ac97.c
@@ -20,12 +20,6 @@
extern struct snd_soc_dai_driver sh4_hac_dai[2];
extern struct snd_soc_platform_driver sh7760_soc_platform;
-static int machine_init(struct snd_soc_pcm_runtime *rtd)
-{
- snd_soc_dapm_sync(&rtd->codec->dapm);
- return 0;
-}
-
static struct snd_soc_dai_link sh7760_ac97_dai = {
.name = "AC97",
.stream_name = "AC97 HiFi",
@@ -33,7 +27,6 @@
.codec_dai_name = "ac97-hifi",
.platform_name = "sh7760-pcm-audio",
.codec_name = "ac97-codec",
- .init = machine_init,
.ops = NULL,
};
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
index 05192d9..e0c621c 100644
--- a/sound/soc/sh/ssi.c
+++ b/sound/soc/sh/ssi.c
@@ -342,7 +342,7 @@
.set_fmt = ssi_set_fmt,
};
-struct snd_soc_dai_driver sh4_ssi_dai[] = {
+static struct snd_soc_dai_driver sh4_ssi_dai[] = {
{
.name = "ssi-dai.0",
.playback = {
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index 20b7f3b..143c705 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -548,9 +548,6 @@
static inline int snd_soc_lzo_get_blksize(struct snd_soc_codec *codec)
{
- const struct snd_soc_codec_driver *codec_drv;
-
- codec_drv = codec->driver;
return DIV_ROUND_UP(codec->reg_size, snd_soc_lzo_block_count());
}
@@ -868,10 +865,6 @@
static int snd_soc_flat_cache_init(struct snd_soc_codec *codec)
{
- const struct snd_soc_codec_driver *codec_drv;
-
- codec_drv = codec->driver;
-
if (codec->reg_def_copy)
codec->reg_cache = kmemdup(codec->reg_def_copy,
codec->reg_size, GFP_KERNEL);
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index ef69f5a..a5d3685 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -106,7 +106,7 @@
if (wordsize + regsize + 2 + 1 != len)
return -EINVAL;
- ret = snd_soc_read(codec , reg);
+ ret = snd_soc_read(codec, reg);
if (ret < 0) {
memset(regbuf, 'X', regsize);
regbuf[regsize] = '\0';
@@ -144,7 +144,7 @@
step = codec->driver->reg_cache_step;
for (i = 0; i < codec->driver->reg_cache_size; i += step) {
- if (codec->readable_register && !codec->readable_register(codec, i))
+ if (!snd_soc_codec_readable_register(codec, i))
continue;
if (codec->driver->display_register) {
count += codec->driver->display_register(codec, buf + count,
@@ -245,7 +245,6 @@
size_t buf_size;
char *start = buf;
unsigned long reg, value;
- int step = 1;
struct snd_soc_codec *codec = file->private_data;
buf_size = min(count, (sizeof(buf)-1));
@@ -253,9 +252,6 @@
return -EFAULT;
buf[buf_size] = 0;
- if (codec->driver->reg_cache_step)
- step = codec->driver->reg_cache_step;
-
while (*start == ' ')
start++;
reg = simple_strtoul(start, &start, 16);
@@ -957,6 +953,8 @@
snd_soc_dapm_new_controls(&codec->dapm, driver->dapm_widgets,
driver->num_dapm_widgets);
+ codec->dapm.idle_bias_off = driver->idle_bias_off;
+
if (driver->probe) {
ret = driver->probe(codec);
if (ret < 0) {
@@ -1057,6 +1055,9 @@
}
rtd->card = card;
+ /* Make sure all DAPM widgets are instantiated */
+ snd_soc_dapm_new_widgets(&codec->dapm);
+
/* machine controls, routes and widgets are not prefixed */
temp = codec->name_prefix;
codec->name_prefix = NULL;
@@ -1072,9 +1073,6 @@
}
codec->name_prefix = temp;
- /* Make sure all DAPM widgets are instantiated */
- snd_soc_dapm_new_widgets(&codec->dapm);
-
/* register the rtd device */
rtd->codec = codec;
rtd->dev.parent = card->dev;
@@ -1319,6 +1317,7 @@
struct snd_soc_codec *codec;
struct snd_soc_codec_conf *codec_conf;
enum snd_soc_compress_type compress_type;
+ struct snd_soc_dai_link *dai_link;
int ret, i, order;
mutex_lock(&card->mutex);
@@ -1431,6 +1430,28 @@
snd_soc_dapm_add_routes(&card->dapm, card->dapm_routes,
card->num_dapm_routes);
+ snd_soc_dapm_new_widgets(&card->dapm);
+
+ for (i = 0; i < card->num_links; i++) {
+ dai_link = &card->dai_link[i];
+
+ if (dai_link->dai_fmt) {
+ ret = snd_soc_dai_set_fmt(card->rtd[i].codec_dai,
+ dai_link->dai_fmt);
+ if (ret != 0)
+ dev_warn(card->rtd[i].codec_dai->dev,
+ "Failed to set DAI format: %d\n",
+ ret);
+
+ ret = snd_soc_dai_set_fmt(card->rtd[i].cpu_dai,
+ dai_link->dai_fmt);
+ if (ret != 0)
+ dev_warn(card->rtd[i].cpu_dai->dev,
+ "Failed to set DAI format: %d\n",
+ ret);
+ }
+ }
+
snprintf(card->snd_card->shortname, sizeof(card->snd_card->shortname),
"%s", card->name);
snprintf(card->snd_card->longname, sizeof(card->snd_card->longname),
@@ -1459,6 +1480,8 @@
}
}
+ snd_soc_dapm_new_widgets(&card->dapm);
+
ret = snd_card_register(card->snd_card);
if (ret < 0) {
printk(KERN_ERR "asoc: failed to register soundcard for %s\n", card->name);
@@ -1479,6 +1502,7 @@
#endif
card->instantiated = 1;
+ snd_soc_dapm_sync(&card->dapm);
mutex_unlock(&card->mutex);
return;
@@ -2229,7 +2253,8 @@
* @kcontrol: mixer control
* @uinfo: control element information
*
- * Callback to provide information about a single mixer control.
+ * Callback to provide information about a single mixer control, or a double
+ * mixer control that spans 2 registers.
*
* Returns 0 for success.
*/
@@ -2239,8 +2264,6 @@
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
int platform_max;
- unsigned int shift = mc->shift;
- unsigned int rshift = mc->rshift;
if (!mc->platform_max)
mc->platform_max = mc->max;
@@ -2251,7 +2274,7 @@
else
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = shift == rshift ? 1 : 2;
+ uinfo->count = snd_soc_volsw_is_stereo(mc) ? 2 : 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = platform_max;
return 0;
@@ -2263,7 +2286,8 @@
* @kcontrol: mixer control
* @ucontrol: control element information
*
- * Callback to get the value of a single mixer control.
+ * Callback to get the value of a single mixer control, or a double mixer
+ * control that spans 2 registers.
*
* Returns 0 for success.
*/
@@ -2274,6 +2298,7 @@
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
unsigned int shift = mc->shift;
unsigned int rshift = mc->rshift;
int max = mc->max;
@@ -2282,13 +2307,18 @@
ucontrol->value.integer.value[0] =
(snd_soc_read(codec, reg) >> shift) & mask;
- if (shift != rshift)
- ucontrol->value.integer.value[1] =
- (snd_soc_read(codec, reg) >> rshift) & mask;
- if (invert) {
+ if (invert)
ucontrol->value.integer.value[0] =
max - ucontrol->value.integer.value[0];
- if (shift != rshift)
+
+ if (snd_soc_volsw_is_stereo(mc)) {
+ if (reg == reg2)
+ ucontrol->value.integer.value[1] =
+ (snd_soc_read(codec, reg) >> rshift) & mask;
+ else
+ ucontrol->value.integer.value[1] =
+ (snd_soc_read(codec, reg2) >> shift) & mask;
+ if (invert)
ucontrol->value.integer.value[1] =
max - ucontrol->value.integer.value[1];
}
@@ -2302,7 +2332,8 @@
* @kcontrol: mixer control
* @ucontrol: control element information
*
- * Callback to set the value of a single mixer control.
+ * Callback to set the value of a single mixer control, or a double mixer
+ * control that spans 2 registers.
*
* Returns 0 for success.
*/
@@ -2313,143 +2344,44 @@
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
unsigned int shift = mc->shift;
unsigned int rshift = mc->rshift;
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
- unsigned int val, val2, val_mask;
+ int err;
+ bool type_2r = 0;
+ unsigned int val2 = 0;
+ unsigned int val, val_mask;
val = (ucontrol->value.integer.value[0] & mask);
if (invert)
val = max - val;
val_mask = mask << shift;
val = val << shift;
- if (shift != rshift) {
+ if (snd_soc_volsw_is_stereo(mc)) {
val2 = (ucontrol->value.integer.value[1] & mask);
if (invert)
val2 = max - val2;
- val_mask |= mask << rshift;
- val |= val2 << rshift;
+ if (reg == reg2) {
+ val_mask |= mask << rshift;
+ val |= val2 << rshift;
+ } else {
+ val2 = val2 << shift;
+ type_2r = 1;
+ }
}
- return snd_soc_update_bits_locked(codec, reg, val_mask, val);
-}
-EXPORT_SYMBOL_GPL(snd_soc_put_volsw);
-
-/**
- * snd_soc_info_volsw_2r - double mixer info callback
- * @kcontrol: mixer control
- * @uinfo: control element information
- *
- * Callback to provide information about a double mixer control that
- * spans 2 codec registers.
- *
- * Returns 0 for success.
- */
-int snd_soc_info_volsw_2r(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int platform_max;
-
- if (!mc->platform_max)
- mc->platform_max = mc->max;
- platform_max = mc->platform_max;
-
- if (platform_max == 1 && !strstr(kcontrol->id.name, " Volume"))
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- else
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-
- uinfo->count = 2;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = platform_max;
- return 0;
-}
-EXPORT_SYMBOL_GPL(snd_soc_info_volsw_2r);
-
-/**
- * snd_soc_get_volsw_2r - double mixer get callback
- * @kcontrol: mixer control
- * @ucontrol: control element information
- *
- * Callback to get the value of a double mixer control that spans 2 registers.
- *
- * Returns 0 for success.
- */
-int snd_soc_get_volsw_2r(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- unsigned int reg = mc->reg;
- unsigned int reg2 = mc->rreg;
- unsigned int shift = mc->shift;
- int max = mc->max;
- unsigned int mask = (1 << fls(max)) - 1;
- unsigned int invert = mc->invert;
-
- ucontrol->value.integer.value[0] =
- (snd_soc_read(codec, reg) >> shift) & mask;
- ucontrol->value.integer.value[1] =
- (snd_soc_read(codec, reg2) >> shift) & mask;
- if (invert) {
- ucontrol->value.integer.value[0] =
- max - ucontrol->value.integer.value[0];
- ucontrol->value.integer.value[1] =
- max - ucontrol->value.integer.value[1];
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(snd_soc_get_volsw_2r);
-
-/**
- * snd_soc_put_volsw_2r - double mixer set callback
- * @kcontrol: mixer control
- * @ucontrol: control element information
- *
- * Callback to set the value of a double mixer control that spans 2 registers.
- *
- * Returns 0 for success.
- */
-int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- unsigned int reg = mc->reg;
- unsigned int reg2 = mc->rreg;
- unsigned int shift = mc->shift;
- int max = mc->max;
- unsigned int mask = (1 << fls(max)) - 1;
- unsigned int invert = mc->invert;
- int err;
- unsigned int val, val2, val_mask;
-
- val_mask = mask << shift;
- val = (ucontrol->value.integer.value[0] & mask);
- val2 = (ucontrol->value.integer.value[1] & mask);
-
- if (invert) {
- val = max - val;
- val2 = max - val2;
- }
-
- val = val << shift;
- val2 = val2 << shift;
-
err = snd_soc_update_bits_locked(codec, reg, val_mask, val);
if (err < 0)
return err;
- err = snd_soc_update_bits_locked(codec, reg2, val_mask, val2);
+ if (type_2r)
+ err = snd_soc_update_bits_locked(codec, reg2, val_mask, val2);
+
return err;
}
-EXPORT_SYMBOL_GPL(snd_soc_put_volsw_2r);
+EXPORT_SYMBOL_GPL(snd_soc_put_volsw);
/**
* snd_soc_info_volsw_s8 - signed mixer info callback
@@ -2680,7 +2612,7 @@
if (dai->driver && dai->driver->ops->set_sysclk)
return dai->driver->ops->set_sysclk(dai, clk_id, freq, dir);
else if (dai->codec && dai->codec->driver->set_sysclk)
- return dai->codec->driver->set_sysclk(dai->codec, clk_id,
+ return dai->codec->driver->set_sysclk(dai->codec, clk_id, 0,
freq, dir);
else
return -EINVAL;
@@ -2691,16 +2623,18 @@
* snd_soc_codec_set_sysclk - configure CODEC system or master clock.
* @codec: CODEC
* @clk_id: DAI specific clock ID
+ * @source: Source for the clock
* @freq: new clock frequency in Hz
* @dir: new clock direction - input/output.
*
* Configures the CODEC master (MCLK) or system (SYSCLK) clocking.
*/
int snd_soc_codec_set_sysclk(struct snd_soc_codec *codec, int clk_id,
- unsigned int freq, int dir)
+ int source, unsigned int freq, int dir)
{
if (codec->driver->set_sysclk)
- return codec->driver->set_sysclk(codec, clk_id, freq, dir);
+ return codec->driver->set_sysclk(codec, clk_id, source,
+ freq, dir);
else
return -EINVAL;
}
@@ -2895,6 +2829,7 @@
card->rtd[i].dai_link = &card->dai_link[i];
INIT_LIST_HEAD(&card->list);
+ INIT_LIST_HEAD(&card->dapm_dirty);
card->instantiated = 0;
mutex_init(&card->mutex);
@@ -3153,6 +3088,7 @@
platform->driver = platform_drv;
platform->dapm.dev = dev;
platform->dapm.platform = platform;
+ platform->dapm.stream_event = platform_drv->stream_event;
mutex_lock(&client_mutex);
list_add(&platform->list, &platform_list);
@@ -3265,6 +3201,7 @@
codec->dapm.dev = dev;
codec->dapm.codec = codec;
codec->dapm.seq_notifier = codec_drv->seq_notifier;
+ codec->dapm.stream_event = codec_drv->stream_event;
codec->dev = dev;
codec->driver = codec_drv;
codec->num_dai = num_dai;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index d67c637..f42e8b9 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -48,6 +48,8 @@
#include <trace/events/asoc.h>
+#define DAPM_UPDATE_STAT(widget, val) widget->dapm->card->dapm_stats.val++;
+
/* dapm power sequences - make this per codec in the future */
static int dapm_up_seq[] = {
[snd_soc_dapm_pre] = 0,
@@ -117,6 +119,21 @@
kfree(buf);
}
+static bool dapm_dirty_widget(struct snd_soc_dapm_widget *w)
+{
+ return !list_empty(&w->dirty);
+}
+
+void dapm_mark_dirty(struct snd_soc_dapm_widget *w, const char *reason)
+{
+ if (!dapm_dirty_widget(w)) {
+ dev_vdbg(w->dapm->dev, "Marking %s dirty due to %s\n",
+ w->name, reason);
+ list_add_tail(&w->dirty, &w->dapm->card->dapm_dirty);
+ }
+}
+EXPORT_SYMBOL_GPL(dapm_mark_dirty);
+
/* create a new dapm widget */
static inline struct snd_soc_dapm_widget *dapm_cnew_widget(
const struct snd_soc_dapm_widget *_widget)
@@ -316,7 +333,7 @@
}
}
break;
- /* does not effect routing - always connected */
+ /* does not affect routing - always connected */
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
case snd_soc_dapm_output:
@@ -328,13 +345,13 @@
case snd_soc_dapm_supply:
case snd_soc_dapm_aif_in:
case snd_soc_dapm_aif_out:
- p->connect = 1;
- break;
- /* does effect routing - dynamically connected */
case snd_soc_dapm_hp:
case snd_soc_dapm_mic:
case snd_soc_dapm_spk:
case snd_soc_dapm_line:
+ p->connect = 1;
+ break;
+ /* does affect routing - dynamically connected */
case snd_soc_dapm_pre:
case snd_soc_dapm_post:
p->connect = 0;
@@ -443,6 +460,11 @@
if (path->name != (char *)w->kcontrol_news[i].name)
continue;
+ if (w->kcontrols[i]) {
+ path->kcontrol = w->kcontrols[i];
+ continue;
+ }
+
wlistsize = sizeof(struct snd_soc_dapm_widget_list) +
sizeof(struct snd_soc_dapm_widget *),
wlist = kzalloc(wlistsize, GFP_KERNEL);
@@ -579,8 +601,8 @@
name + prefix_len, prefix);
ret = snd_ctl_add(card, kcontrol);
if (ret < 0) {
- dev_err(dapm->dev,
- "asoc: failed to add kcontrol %s\n", w->name);
+ dev_err(dapm->dev, "failed to add kcontrol %s: %d\n",
+ w->name, ret);
kfree(wlist);
return ret;
}
@@ -644,30 +666,45 @@
struct snd_soc_dapm_path *path;
int con = 0;
+ if (widget->outputs >= 0)
+ return widget->outputs;
+
+ DAPM_UPDATE_STAT(widget, path_checks);
+
if (widget->id == snd_soc_dapm_supply)
return 0;
switch (widget->id) {
case snd_soc_dapm_adc:
case snd_soc_dapm_aif_out:
- if (widget->active)
- return snd_soc_dapm_suspend_check(widget);
+ if (widget->active) {
+ widget->outputs = snd_soc_dapm_suspend_check(widget);
+ return widget->outputs;
+ }
default:
break;
}
if (widget->connected) {
/* connected pin ? */
- if (widget->id == snd_soc_dapm_output && !widget->ext)
- return snd_soc_dapm_suspend_check(widget);
+ if (widget->id == snd_soc_dapm_output && !widget->ext) {
+ widget->outputs = snd_soc_dapm_suspend_check(widget);
+ return widget->outputs;
+ }
/* connected jack or spk ? */
- if (widget->id == snd_soc_dapm_hp || widget->id == snd_soc_dapm_spk ||
- (widget->id == snd_soc_dapm_line && !list_empty(&widget->sources)))
- return snd_soc_dapm_suspend_check(widget);
+ if (widget->id == snd_soc_dapm_hp ||
+ widget->id == snd_soc_dapm_spk ||
+ (widget->id == snd_soc_dapm_line &&
+ !list_empty(&widget->sources))) {
+ widget->outputs = snd_soc_dapm_suspend_check(widget);
+ return widget->outputs;
+ }
}
list_for_each_entry(path, &widget->sinks, list_source) {
+ DAPM_UPDATE_STAT(widget, neighbour_checks);
+
if (path->weak)
continue;
@@ -680,6 +717,8 @@
}
}
+ widget->outputs = con;
+
return con;
}
@@ -692,6 +731,11 @@
struct snd_soc_dapm_path *path;
int con = 0;
+ if (widget->inputs >= 0)
+ return widget->inputs;
+
+ DAPM_UPDATE_STAT(widget, path_checks);
+
if (widget->id == snd_soc_dapm_supply)
return 0;
@@ -699,28 +743,40 @@
switch (widget->id) {
case snd_soc_dapm_dac:
case snd_soc_dapm_aif_in:
- if (widget->active)
- return snd_soc_dapm_suspend_check(widget);
+ if (widget->active) {
+ widget->inputs = snd_soc_dapm_suspend_check(widget);
+ return widget->inputs;
+ }
default:
break;
}
if (widget->connected) {
/* connected pin ? */
- if (widget->id == snd_soc_dapm_input && !widget->ext)
- return snd_soc_dapm_suspend_check(widget);
+ if (widget->id == snd_soc_dapm_input && !widget->ext) {
+ widget->inputs = snd_soc_dapm_suspend_check(widget);
+ return widget->inputs;
+ }
/* connected VMID/Bias for lower pops */
- if (widget->id == snd_soc_dapm_vmid)
- return snd_soc_dapm_suspend_check(widget);
+ if (widget->id == snd_soc_dapm_vmid) {
+ widget->inputs = snd_soc_dapm_suspend_check(widget);
+ return widget->inputs;
+ }
/* connected jack ? */
if (widget->id == snd_soc_dapm_mic ||
- (widget->id == snd_soc_dapm_line && !list_empty(&widget->sinks)))
- return snd_soc_dapm_suspend_check(widget);
+ (widget->id == snd_soc_dapm_line &&
+ !list_empty(&widget->sinks))) {
+ widget->inputs = snd_soc_dapm_suspend_check(widget);
+ return widget->inputs;
+ }
+
}
list_for_each_entry(path, &widget->sources, list_sink) {
+ DAPM_UPDATE_STAT(widget, neighbour_checks);
+
if (path->weak)
continue;
@@ -733,6 +789,8 @@
}
}
+ widget->inputs = con;
+
return con;
}
@@ -756,12 +814,29 @@
}
EXPORT_SYMBOL_GPL(dapm_reg_event);
+static int dapm_widget_power_check(struct snd_soc_dapm_widget *w)
+{
+ if (w->power_checked)
+ return w->new_power;
+
+ if (w->force)
+ w->new_power = 1;
+ else
+ w->new_power = w->power_check(w);
+
+ w->power_checked = true;
+
+ return w->new_power;
+}
+
/* Generic check to see if a widget should be powered.
*/
static int dapm_generic_check_power(struct snd_soc_dapm_widget *w)
{
int in, out;
+ DAPM_UPDATE_STAT(w, power_checks);
+
in = is_connected_input_ep(w);
dapm_clear_walk(w->dapm);
out = is_connected_output_ep(w);
@@ -774,6 +849,8 @@
{
int in;
+ DAPM_UPDATE_STAT(w, power_checks);
+
if (w->active) {
in = is_connected_input_ep(w);
dapm_clear_walk(w->dapm);
@@ -788,6 +865,8 @@
{
int out;
+ DAPM_UPDATE_STAT(w, power_checks);
+
if (w->active) {
out = is_connected_output_ep(w);
dapm_clear_walk(w->dapm);
@@ -801,10 +880,13 @@
static int dapm_supply_check_power(struct snd_soc_dapm_widget *w)
{
struct snd_soc_dapm_path *path;
- int power = 0;
+
+ DAPM_UPDATE_STAT(w, power_checks);
/* Check if one of our outputs is connected */
list_for_each_entry(path, &w->sinks, list_source) {
+ DAPM_UPDATE_STAT(w, neighbour_checks);
+
if (path->weak)
continue;
@@ -815,21 +897,18 @@
if (!path->sink)
continue;
- if (path->sink->force) {
- power = 1;
- break;
- }
-
- if (path->sink->power_check &&
- path->sink->power_check(path->sink)) {
- power = 1;
- break;
- }
+ if (dapm_widget_power_check(path->sink))
+ return 1;
}
dapm_clear_walk(w->dapm);
- return power;
+ return 0;
+}
+
+static int dapm_always_on_check_power(struct snd_soc_dapm_widget *w)
+{
+ return 1;
}
static int dapm_seq_compare(struct snd_soc_dapm_widget *a,
@@ -1172,6 +1251,85 @@
}
}
+static void dapm_widget_set_peer_power(struct snd_soc_dapm_widget *peer,
+ bool power, bool connect)
+{
+ /* If a connection is being made or broken then that update
+ * will have marked the peer dirty, otherwise the widgets are
+ * not connected and this update has no impact. */
+ if (!connect)
+ return;
+
+ /* If the peer is already in the state we're moving to then we
+ * won't have an impact on it. */
+ if (power != peer->power)
+ dapm_mark_dirty(peer, "peer state change");
+}
+
+static void dapm_widget_set_power(struct snd_soc_dapm_widget *w, bool power,
+ struct list_head *up_list,
+ struct list_head *down_list)
+{
+ struct snd_soc_dapm_path *path;
+
+ if (w->power == power)
+ return;
+
+ trace_snd_soc_dapm_widget_power(w, power);
+
+ /* If we changed our power state perhaps our neigbours changed
+ * also.
+ */
+ list_for_each_entry(path, &w->sources, list_sink) {
+ if (path->source) {
+ dapm_widget_set_peer_power(path->source, power,
+ path->connect);
+ }
+ }
+ switch (w->id) {
+ case snd_soc_dapm_supply:
+ /* Supplies can't affect their outputs, only their inputs */
+ break;
+ default:
+ list_for_each_entry(path, &w->sinks, list_source) {
+ if (path->sink) {
+ dapm_widget_set_peer_power(path->sink, power,
+ path->connect);
+ }
+ }
+ break;
+ }
+
+ if (power)
+ dapm_seq_insert(w, up_list, true);
+ else
+ dapm_seq_insert(w, down_list, false);
+
+ w->power = power;
+}
+
+static void dapm_power_one_widget(struct snd_soc_dapm_widget *w,
+ struct list_head *up_list,
+ struct list_head *down_list)
+{
+ int power;
+
+ switch (w->id) {
+ case snd_soc_dapm_pre:
+ dapm_seq_insert(w, down_list, false);
+ break;
+ case snd_soc_dapm_post:
+ dapm_seq_insert(w, up_list, true);
+ break;
+
+ default:
+ power = dapm_widget_power_check(w);
+
+ dapm_widget_set_power(w, power, up_list, down_list);
+ break;
+ }
+}
+
/*
* Scan each dapm widget for complete audio path.
* A complete path is a route that has valid endpoints i.e.:-
@@ -1190,7 +1348,6 @@
LIST_HEAD(down_list);
LIST_HEAD(async_domain);
enum snd_soc_bias_level bias;
- int power;
trace_snd_soc_dapm_start(card);
@@ -1203,61 +1360,47 @@
}
}
- /* Check which widgets we need to power and store them in
- * lists indicating if they should be powered up or down.
- */
+ memset(&card->dapm_stats, 0, sizeof(card->dapm_stats));
+
list_for_each_entry(w, &card->widgets, list) {
- switch (w->id) {
- case snd_soc_dapm_pre:
- dapm_seq_insert(w, &down_list, false);
- break;
- case snd_soc_dapm_post:
- dapm_seq_insert(w, &up_list, true);
- break;
+ w->power_checked = false;
+ w->inputs = -1;
+ w->outputs = -1;
+ }
- default:
- if (!w->power_check)
- continue;
+ /* Check which widgets we need to power and store them in
+ * lists indicating if they should be powered up or down. We
+ * only check widgets that have been flagged as dirty but note
+ * that new widgets may be added to the dirty list while we
+ * iterate.
+ */
+ list_for_each_entry(w, &card->dapm_dirty, dirty) {
+ dapm_power_one_widget(w, &up_list, &down_list);
+ }
- if (!w->force)
- power = w->power_check(w);
- else
- power = 1;
+ list_for_each_entry(w, &card->widgets, list) {
+ list_del_init(&w->dirty);
- if (power) {
- d = w->dapm;
+ if (w->power) {
+ d = w->dapm;
- /* Supplies and micbiases only bring
- * the context up to STANDBY as unless
- * something else is active and
- * passing audio they generally don't
- * require full power.
- */
- switch (w->id) {
- case snd_soc_dapm_supply:
- case snd_soc_dapm_micbias:
- if (d->target_bias_level < SND_SOC_BIAS_STANDBY)
- d->target_bias_level = SND_SOC_BIAS_STANDBY;
- break;
- default:
- d->target_bias_level = SND_SOC_BIAS_ON;
- break;
- }
+ /* Supplies and micbiases only bring the
+ * context up to STANDBY as unless something
+ * else is active and passing audio they
+ * generally don't require full power.
+ */
+ switch (w->id) {
+ case snd_soc_dapm_supply:
+ case snd_soc_dapm_micbias:
+ if (d->target_bias_level < SND_SOC_BIAS_STANDBY)
+ d->target_bias_level = SND_SOC_BIAS_STANDBY;
+ break;
+ default:
+ d->target_bias_level = SND_SOC_BIAS_ON;
+ break;
}
-
- if (w->power == power)
- continue;
-
- trace_snd_soc_dapm_widget_power(w, power);
-
- if (power)
- dapm_seq_insert(w, &up_list, true);
- else
- dapm_seq_insert(w, &down_list, false);
-
- w->power = power;
- break;
}
+
}
/* If there are no DAPM widgets then try to figure out power from the
@@ -1286,14 +1429,18 @@
}
}
- /* Force all contexts in the card to the same bias state */
+ /* Force all contexts in the card to the same bias state if
+ * they're not ground referenced.
+ */
bias = SND_SOC_BIAS_OFF;
list_for_each_entry(d, &card->dapm_list, list)
if (d->target_bias_level > bias)
bias = d->target_bias_level;
list_for_each_entry(d, &card->dapm_list, list)
- d->target_bias_level = bias;
+ if (!d->idle_bias_off)
+ d->target_bias_level = bias;
+ trace_snd_soc_dapm_walk_done(card);
/* Run all the bias changes in parallel */
list_for_each_entry(d, &dapm->card->dapm_list, list)
@@ -1524,14 +1671,21 @@
found = 1;
/* we now need to match the string in the enum to the path */
- if (!(strcmp(path->name, e->texts[mux])))
+ if (!(strcmp(path->name, e->texts[mux]))) {
path->connect = 1; /* new connection */
- else
+ dapm_mark_dirty(path->source, "mux connection");
+ } else {
+ if (path->connect)
+ dapm_mark_dirty(path->source,
+ "mux disconnection");
path->connect = 0; /* old connection must be powered down */
+ }
}
- if (found)
+ if (found) {
+ dapm_mark_dirty(widget, "mux change");
dapm_power_widgets(widget->dapm, SND_SOC_DAPM_STREAM_NOP);
+ }
return 0;
}
@@ -1556,11 +1710,13 @@
/* found, now check type */
found = 1;
path->connect = connect;
- break;
+ dapm_mark_dirty(path->source, "mixer connection");
}
- if (found)
+ if (found) {
+ dapm_mark_dirty(widget, "mixer update");
dapm_power_widgets(widget->dapm, SND_SOC_DAPM_STREAM_NOP);
+ }
return 0;
}
@@ -1704,6 +1860,7 @@
w->connected = status;
if (status == 0)
w->force = 0;
+ dapm_mark_dirty(w, "pin configuration");
return 0;
}
@@ -1719,6 +1876,13 @@
*/
int snd_soc_dapm_sync(struct snd_soc_dapm_context *dapm)
{
+ /*
+ * Suppress early reports (eg, jacks syncing their state) to avoid
+ * silly DAPM runs during card startup.
+ */
+ if (!dapm->card || !dapm->card->instantiated)
+ return 0;
+
return dapm_power_widgets(dapm, SND_SOC_DAPM_STREAM_NOP);
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_sync);
@@ -2004,42 +2168,18 @@
case snd_soc_dapm_switch:
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
- w->power_check = dapm_generic_check_power;
dapm_new_mixer(w);
break;
case snd_soc_dapm_mux:
case snd_soc_dapm_virt_mux:
case snd_soc_dapm_value_mux:
- w->power_check = dapm_generic_check_power;
dapm_new_mux(w);
break;
- case snd_soc_dapm_adc:
- case snd_soc_dapm_aif_out:
- w->power_check = dapm_adc_check_power;
- break;
- case snd_soc_dapm_dac:
- case snd_soc_dapm_aif_in:
- w->power_check = dapm_dac_check_power;
- break;
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
- w->power_check = dapm_generic_check_power;
dapm_new_pga(w);
break;
- case snd_soc_dapm_input:
- case snd_soc_dapm_output:
- case snd_soc_dapm_micbias:
- case snd_soc_dapm_spk:
- case snd_soc_dapm_hp:
- case snd_soc_dapm_mic:
- case snd_soc_dapm_line:
- w->power_check = dapm_generic_check_power;
- break;
- case snd_soc_dapm_supply:
- w->power_check = dapm_supply_check_power;
- case snd_soc_dapm_vmid:
- case snd_soc_dapm_pre:
- case snd_soc_dapm_post:
+ default:
break;
}
@@ -2056,6 +2196,7 @@
w->new = 1;
+ dapm_mark_dirty(w, "new widget");
dapm_debugfs_add_widget(w);
}
@@ -2530,6 +2671,44 @@
else
snprintf(w->name, name_len, "%s", widget->name);
+ switch (w->id) {
+ case snd_soc_dapm_switch:
+ case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
+ w->power_check = dapm_generic_check_power;
+ break;
+ case snd_soc_dapm_mux:
+ case snd_soc_dapm_virt_mux:
+ case snd_soc_dapm_value_mux:
+ w->power_check = dapm_generic_check_power;
+ break;
+ case snd_soc_dapm_adc:
+ case snd_soc_dapm_aif_out:
+ w->power_check = dapm_adc_check_power;
+ break;
+ case snd_soc_dapm_dac:
+ case snd_soc_dapm_aif_in:
+ w->power_check = dapm_dac_check_power;
+ break;
+ case snd_soc_dapm_pga:
+ case snd_soc_dapm_out_drv:
+ case snd_soc_dapm_input:
+ case snd_soc_dapm_output:
+ case snd_soc_dapm_micbias:
+ case snd_soc_dapm_spk:
+ case snd_soc_dapm_hp:
+ case snd_soc_dapm_mic:
+ case snd_soc_dapm_line:
+ w->power_check = dapm_generic_check_power;
+ break;
+ case snd_soc_dapm_supply:
+ w->power_check = dapm_supply_check_power;
+ break;
+ default:
+ w->power_check = dapm_always_on_check_power;
+ break;
+ }
+
dapm->n_widgets++;
w->dapm = dapm;
w->codec = dapm->codec;
@@ -2537,6 +2716,7 @@
INIT_LIST_HEAD(&w->sources);
INIT_LIST_HEAD(&w->sinks);
INIT_LIST_HEAD(&w->list);
+ INIT_LIST_HEAD(&w->dirty);
list_add(&w->list, &dapm->card->widgets);
/* machine layer set ups unconnected pins and insertions */
@@ -2584,9 +2764,10 @@
{
if (!w->sname || w->dapm != dapm)
continue;
- dev_dbg(w->dapm->dev, "widget %s\n %s stream %s event %d\n",
+ dev_vdbg(w->dapm->dev, "widget %s\n %s stream %s event %d\n",
w->name, w->sname, stream, event);
if (strstr(w->sname, stream)) {
+ dapm_mark_dirty(w, "stream event");
switch(event) {
case SND_SOC_DAPM_STREAM_START:
w->active = 1;
@@ -2604,6 +2785,10 @@
}
dapm_power_widgets(dapm, event);
+
+ /* do we need to notify any clients that DAPM stream is complete */
+ if (dapm->stream_event)
+ dapm->stream_event(dapm, event);
}
/**
@@ -2672,6 +2857,7 @@
dev_dbg(w->dapm->dev, "dapm: force enable pin %s\n", pin);
w->connected = 1;
w->force = 1;
+ dapm_mark_dirty(w, "force enable");
return 0;
}
diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c
index a62f7dd..dd89933 100644
--- a/sound/soc/soc-io.c
+++ b/sound/soc/soc-io.c
@@ -13,26 +13,14 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
+#include <linux/regmap.h>
#include <sound/soc.h>
#include <trace/events/asoc.h>
-#ifdef CONFIG_SPI_MASTER
-static int do_spi_write(void *control, const char *data, int len)
-{
- struct spi_device *spi = control;
- int ret;
-
- ret = spi_write(spi, data, len);
- if (ret < 0)
- return ret;
-
- return len;
-}
-#endif
-
-static int do_hw_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value, const void *data, int len)
+#ifdef CONFIG_REGMAP
+static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
{
int ret;
@@ -49,13 +37,7 @@
return 0;
}
- ret = codec->hw_write(codec->control_data, data, len);
- if (ret == len)
- return 0;
- if (ret < 0)
- return ret;
- else
- return -EIO;
+ return regmap_write(codec->control_data, reg, value);
}
static unsigned int hw_read(struct snd_soc_codec *codec, unsigned int reg)
@@ -69,8 +51,11 @@
if (codec->cache_only)
return -1;
- BUG_ON(!codec->hw_read);
- return codec->hw_read(codec, reg);
+ ret = regmap_read(codec->control_data, reg, &val);
+ if (ret == 0)
+ return val;
+ else
+ return -1;
}
ret = snd_soc_cache_read(codec, reg, &val);
@@ -79,202 +64,18 @@
return val;
}
-static int snd_soc_4_12_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 data;
-
- data = cpu_to_be16((reg << 12) | (value & 0xffffff));
-
- return do_hw_write(codec, reg, value, &data, 2);
-}
-
-static int snd_soc_7_9_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 data;
-
- data = cpu_to_be16((reg << 9) | (value & 0x1ff));
-
- return do_hw_write(codec, reg, value, &data, 2);
-}
-
-static int snd_soc_8_8_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- reg &= 0xff;
- data[0] = reg;
- data[1] = value & 0xff;
-
- return do_hw_write(codec, reg, value, data, 2);
-}
-
-static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
- u16 val = cpu_to_be16(value);
-
- data[0] = reg;
- memcpy(&data[1], &val, sizeof(val));
-
- return do_hw_write(codec, reg, value, data, 3);
-}
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int do_i2c_read(struct snd_soc_codec *codec,
- void *reg, int reglen,
- void *data, int datalen)
-{
- struct i2c_msg xfer[2];
- int ret;
- struct i2c_client *client = codec->control_data;
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = reglen;
- xfer[0].buf = reg;
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = datalen;
- xfer[1].buf = data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret == 2)
- return 0;
- else if (ret < 0)
- return ret;
- else
- return -EIO;
-}
-#endif
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_8_8_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u8 reg = r;
- u8 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 1, &data, 1);
- if (ret < 0)
- return 0;
- return data;
-}
-#else
-#define snd_soc_8_8_read_i2c NULL
-#endif
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_8_16_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u8 reg = r;
- u16 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 1, &data, 2);
- if (ret < 0)
- return 0;
- return (data >> 8) | ((data & 0xff) << 8);
-}
-#else
-#define snd_soc_8_16_read_i2c NULL
-#endif
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_16_8_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u16 reg = r;
- u8 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 2, &data, 1);
- if (ret < 0)
- return 0;
- return data;
-}
-#else
-#define snd_soc_16_8_read_i2c NULL
-#endif
-
-#if defined(CONFIG_SPI_MASTER)
-static unsigned int snd_soc_16_8_read_spi(struct snd_soc_codec *codec,
- unsigned int r)
-{
- struct spi_device *spi = codec->control_data;
-
- const u16 reg = cpu_to_be16(r | 0x100);
- u8 data;
- int ret;
-
- ret = spi_write_then_read(spi, ®, 2, &data, 1);
- if (ret < 0)
- return 0;
- return data;
-}
-#else
-#define snd_soc_16_8_read_spi NULL
-#endif
-
-static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
- u16 rval = cpu_to_be16(reg);
-
- memcpy(data, &rval, sizeof(rval));
- data[2] = value;
-
- return do_hw_write(codec, reg, value, data, 3);
-}
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_16_16_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u16 reg = cpu_to_be16(r);
- u16 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 2, &data, 2);
- if (ret < 0)
- return 0;
- return be16_to_cpu(data);
-}
-#else
-#define snd_soc_16_16_read_i2c NULL
-#endif
-
-static int snd_soc_16_16_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 data[2];
-
- data[0] = cpu_to_be16(reg);
- data[1] = cpu_to_be16(value);
-
- return do_hw_write(codec, reg, value, data, sizeof(data));
-}
-
/* Primitive bulk write support for soc-cache. The data pointed to by
- * `data' needs to already be in the form the hardware expects
- * including any leading register specific data. Any data written
- * through this function will not go through the cache as it only
- * handles writing to volatile or out of bounds registers.
+ * `data' needs to already be in the form the hardware expects. Any
+ * data written through this function will not go through the cache as
+ * it only handles writing to volatile or out of bounds registers.
+ *
+ * This is currently only supported for devices using the regmap API
+ * wrappers.
*/
-static int snd_soc_hw_bulk_write_raw(struct snd_soc_codec *codec, unsigned int reg,
+static int snd_soc_hw_bulk_write_raw(struct snd_soc_codec *codec,
+ unsigned int reg,
const void *data, size_t len)
{
- int ret;
-
/* To ensure that we don't get out of sync with the cache, check
* whether the base register is volatile or if we've directly asked
* to bypass the cache. Out of bounds registers are considered
@@ -285,68 +86,9 @@
&& reg < codec->driver->reg_cache_size)
return -EINVAL;
- switch (codec->control_type) {
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
- case SND_SOC_I2C:
- ret = i2c_master_send(to_i2c_client(codec->dev), data, len);
- break;
-#endif
-#if defined(CONFIG_SPI_MASTER)
- case SND_SOC_SPI:
- ret = spi_write(to_spi_device(codec->dev), data, len);
- break;
-#endif
- default:
- BUG();
- }
-
- if (ret == len)
- return 0;
- if (ret < 0)
- return ret;
- else
- return -EIO;
+ return regmap_raw_write(codec->control_data, reg, data, len);
}
-static struct {
- int addr_bits;
- int data_bits;
- int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int);
- unsigned int (*read)(struct snd_soc_codec *, unsigned int);
- unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
- unsigned int (*spi_read)(struct snd_soc_codec *, unsigned int);
-} io_types[] = {
- {
- .addr_bits = 4, .data_bits = 12,
- .write = snd_soc_4_12_write,
- },
- {
- .addr_bits = 7, .data_bits = 9,
- .write = snd_soc_7_9_write,
- },
- {
- .addr_bits = 8, .data_bits = 8,
- .write = snd_soc_8_8_write,
- .i2c_read = snd_soc_8_8_read_i2c,
- },
- {
- .addr_bits = 8, .data_bits = 16,
- .write = snd_soc_8_16_write,
- .i2c_read = snd_soc_8_16_read_i2c,
- },
- {
- .addr_bits = 16, .data_bits = 8,
- .write = snd_soc_16_8_write,
- .i2c_read = snd_soc_16_8_read_i2c,
- .spi_read = snd_soc_16_8_read_spi,
- },
- {
- .addr_bits = 16, .data_bits = 16,
- .write = snd_soc_16_16_write,
- .i2c_read = snd_soc_16_16_read_i2c,
- },
-};
-
/**
* snd_soc_codec_set_cache_io: Set up standard I/O functions.
*
@@ -370,50 +112,51 @@
int addr_bits, int data_bits,
enum snd_soc_control_type control)
{
- int i;
+ struct regmap_config config;
- for (i = 0; i < ARRAY_SIZE(io_types); i++)
- if (io_types[i].addr_bits == addr_bits &&
- io_types[i].data_bits == data_bits)
- break;
- if (i == ARRAY_SIZE(io_types)) {
- printk(KERN_ERR
- "No I/O functions for %d bit address %d bit data\n",
- addr_bits, data_bits);
- return -EINVAL;
- }
-
- codec->write = io_types[i].write;
+ memset(&config, 0, sizeof(config));
+ codec->write = hw_write;
codec->read = hw_read;
codec->bulk_write_raw = snd_soc_hw_bulk_write_raw;
+ config.reg_bits = addr_bits;
+ config.val_bits = data_bits;
+
switch (control) {
+#if defined(CONFIG_REGMAP_I2C) || defined(CONFIG_REGMAP_I2C_MODULE)
case SND_SOC_I2C:
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
- codec->hw_write = (hw_write_t)i2c_master_send;
-#endif
- if (io_types[i].i2c_read)
- codec->hw_read = io_types[i].i2c_read;
-
- codec->control_data = container_of(codec->dev,
- struct i2c_client,
- dev);
+ codec->control_data = regmap_init_i2c(to_i2c_client(codec->dev),
+ &config);
break;
+#endif
+#if defined(CONFIG_REGMAP_SPI) || defined(CONFIG_REGMAP_SPI_MODULE)
case SND_SOC_SPI:
-#ifdef CONFIG_SPI_MASTER
- codec->hw_write = do_spi_write;
-#endif
- if (io_types[i].spi_read)
- codec->hw_read = io_types[i].spi_read;
-
- codec->control_data = container_of(codec->dev,
- struct spi_device,
- dev);
+ codec->control_data = regmap_init_spi(to_spi_device(codec->dev),
+ &config);
break;
+#endif
+
+ case SND_SOC_REGMAP:
+ /* Device has made its own regmap arrangements */
+ break;
+
+ default:
+ return -EINVAL;
}
+ if (IS_ERR(codec->control_data))
+ return PTR_ERR(codec->control_data);
+
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
-
+#else
+int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+ int addr_bits, int data_bits,
+ enum snd_soc_control_type control)
+{
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
+#endif
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index fa31d9c..52db966 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -188,6 +188,8 @@
list_add(&(pins[i].list), &jack->pins);
}
+ snd_soc_dapm_new_widgets(&jack->codec->card->dapm);
+
/* Update to reflect the last reported status; canned jack
* implementations are likely to set their state before the
* card has an opportunity to associate pins.
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 2879c88..ee15337 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -27,17 +27,13 @@
#include <sound/soc.h>
#include <sound/initval.h>
-static DEFINE_MUTEX(pcm_mutex);
-
-static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream)
+static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *soc_dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
int ret;
- if (!codec_dai->driver->symmetric_rates &&
- !cpu_dai->driver->symmetric_rates &&
+ if (!soc_dai->driver->symmetric_rates &&
!rtd->dai_link->symmetric_rates)
return 0;
@@ -45,19 +41,19 @@
* the second can need to get its constraints before the first has
* picked a rate. Complain and allow the application to carry on.
*/
- if (!rtd->rate) {
- dev_warn(&rtd->dev,
+ if (!soc_dai->rate) {
+ dev_warn(soc_dai->dev,
"Not enforcing symmetric_rates due to race\n");
return 0;
}
- dev_dbg(&rtd->dev, "Symmetry forces %dHz rate\n", rtd->rate);
+ dev_dbg(soc_dai->dev, "Symmetry forces %dHz rate\n", soc_dai->rate);
ret = snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_RATE,
- rtd->rate, rtd->rate);
+ soc_dai->rate, soc_dai->rate);
if (ret < 0) {
- dev_err(&rtd->dev,
+ dev_err(soc_dai->dev,
"Unable to apply rate symmetry constraint: %d\n", ret);
return ret;
}
@@ -187,8 +183,14 @@
}
/* Symmetry only applies if we've already got an active stream. */
- if (cpu_dai->active || codec_dai->active) {
- ret = soc_pcm_apply_symmetry(substream);
+ if (cpu_dai->active) {
+ ret = soc_pcm_apply_symmetry(substream, cpu_dai);
+ if (ret != 0)
+ goto config_err;
+ }
+
+ if (codec_dai->active) {
+ ret = soc_pcm_apply_symmetry(substream, codec_dai);
if (ret != 0)
goto config_err;
}
@@ -290,8 +292,12 @@
codec_dai->active--;
codec->active--;
- if (!cpu_dai->active && !codec_dai->active)
- rtd->rate = 0;
+ /* clear the corresponding DAIs rate when inactive */
+ if (!cpu_dai->active)
+ cpu_dai->rate = 0;
+
+ if (!codec_dai->active)
+ codec_dai->rate = 0;
/* Muting the DAC suppresses artifacts caused during digital
* shutdown, for example from stopping clocks.
@@ -313,10 +319,17 @@
cpu_dai->runtime = NULL;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- /* start delayed pop wq here for playback streams */
- codec_dai->pop_wait = 1;
- schedule_delayed_work(&rtd->delayed_work,
- msecs_to_jiffies(rtd->pmdown_time));
+ if (unlikely(codec->ignore_pmdown_time)) {
+ /* powered down playback stream now */
+ snd_soc_dapm_stream_event(rtd,
+ codec_dai->driver->playback.stream_name,
+ SND_SOC_DAPM_STREAM_STOP);
+ } else {
+ /* start delayed pop wq here for playback streams */
+ codec_dai->pop_wait = 1;
+ schedule_delayed_work(&rtd->delayed_work,
+ msecs_to_jiffies(rtd->pmdown_time));
+ }
} else {
/* capture streams can be powered down now */
snd_soc_dapm_stream_event(rtd,
@@ -449,7 +462,9 @@
}
}
- rtd->rate = params_rate(params);
+ /* store the rate for each DAIs */
+ cpu_dai->rate = params_rate(params);
+ codec_dai->rate = params_rate(params);
out:
mutex_unlock(&rtd->pcm_mutex);
diff --git a/sound/soc/tegra/tegra_das.c b/sound/soc/tegra/tegra_das.c
index 9f24ef7..3b55a44 100644
--- a/sound/soc/tegra/tegra_das.c
+++ b/sound/soc/tegra/tegra_das.c
@@ -212,7 +212,7 @@
release_mem_region(res->start, resource_size(res));
err_free:
kfree(das);
- das = 0;
+ das = NULL;
exit:
return ret;
}
@@ -234,7 +234,7 @@
release_mem_region(res->start, resource_size(res));
kfree(das);
- das = 0;
+ das = NULL;
return 0;
}
diff --git a/sound/soc/tegra/tegra_i2s.c b/sound/soc/tegra/tegra_i2s.c
index f36b996..6728fab 100644
--- a/sound/soc/tegra/tegra_i2s.c
+++ b/sound/soc/tegra/tegra_i2s.c
@@ -312,7 +312,7 @@
.trigger = tegra_i2s_trigger,
};
-struct snd_soc_dai_driver tegra_i2s_dai[] = {
+static struct snd_soc_dai_driver tegra_i2s_dai[] = {
{
.name = DRV_NAME ".0",
.probe = tegra_i2s_probe,
diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c
index c7cfd96..436def1d 100644
--- a/sound/soc/tegra/tegra_pcm.c
+++ b/sound/soc/tegra/tegra_pcm.c
@@ -367,7 +367,7 @@
tegra_pcm_deallocate_dma_buffer(pcm, SNDRV_PCM_STREAM_PLAYBACK);
}
-struct snd_soc_platform_driver tegra_pcm_platform = {
+static struct snd_soc_platform_driver tegra_pcm_platform = {
.ops = &tegra_pcm_ops,
.pcm_new = tegra_pcm_new,
.pcm_free = tegra_pcm_free,
diff --git a/sound/soc/tegra/tegra_spdif.c b/sound/soc/tegra/tegra_spdif.c
index abe606b..dd11d0c 100644
--- a/sound/soc/tegra/tegra_spdif.c
+++ b/sound/soc/tegra/tegra_spdif.c
@@ -127,7 +127,7 @@
{
struct device *dev = substream->pcm->card->dev;
struct tegra_spdif *spdif = snd_soc_dai_get_drvdata(dai);
- int ret, srate, spdifclock;
+ int ret, spdifclock;
spdif->reg_ctrl &= ~TEGRA_SPDIF_CTRL_PACK;
spdif->reg_ctrl &= ~TEGRA_SPDIF_CTRL_BIT_MODE_MASK;
@@ -140,7 +140,6 @@
return -EINVAL;
}
- srate = params_rate(params);
switch (params_rate(params)) {
case 32000:
spdifclock = 4096000;
@@ -232,7 +231,7 @@
.trigger = tegra_spdif_trigger,
};
-struct snd_soc_dai_driver tegra_spdif_dai = {
+static struct snd_soc_dai_driver tegra_spdif_dai = {
.name = DRV_NAME,
.probe = tegra_spdif_probe,
.playback = {
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index be27f1d..a81cf39 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -339,8 +339,6 @@
snd_soc_dapm_nc_pin(dapm, "LINEOUTL");
}
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/tegra/trimslice.c b/sound/soc/tegra/trimslice.c
index 8fc07e9..b3a7efa 100644
--- a/sound/soc/tegra/trimslice.c
+++ b/sound/soc/tegra/trimslice.c
@@ -124,8 +124,6 @@
snd_soc_dapm_nc_pin(dapm, "RHPOUT");
snd_soc_dapm_nc_pin(dapm, "MICIN");
- snd_soc_dapm_sync(dapm);
-
return 0;
}
diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c
index 743d07b..a4e3f55 100644
--- a/sound/soc/txx9/txx9aclc-ac97.c
+++ b/sound/soc/txx9/txx9aclc-ac97.c
@@ -201,7 +201,7 @@
if (!drvdata->base)
return -EBUSY;
err = devm_request_irq(&pdev->dev, irq, txx9aclc_ac97_irq,
- IRQF_DISABLED, dev_name(&pdev->dev), drvdata);
+ 0, dev_name(&pdev->dev), drvdata);
if (err < 0)
return err;
diff --git a/sound/soc/txx9/txx9aclc-generic.c b/sound/soc/txx9/txx9aclc-generic.c
index 6770e71..9b5e283 100644
--- a/sound/soc/txx9/txx9aclc-generic.c
+++ b/sound/soc/txx9/txx9aclc-generic.c
@@ -62,7 +62,7 @@
}
static struct platform_driver txx9aclc_generic_driver = {
- .remove = txx9aclc_generic_remove,
+ .remove = __exit_p(txx9aclc_generic_remove),
.driver = {
.name = "txx9aclc-generic",
.owner = THIS_MODULE,
diff --git a/sound/sparc/amd7930.c b/sound/sparc/amd7930.c
index ad7d4d7..f036776 100644
--- a/sound/sparc/amd7930.c
+++ b/sound/sparc/amd7930.c
@@ -962,7 +962,7 @@
amd7930_idle(amd);
if (request_irq(irq, snd_amd7930_interrupt,
- IRQF_DISABLED | IRQF_SHARED, "amd7930", amd)) {
+ IRQF_SHARED, "amd7930", amd)) {
snd_printk(KERN_ERR "amd7930-%d: Unable to grab IRQ %d\n",
dev, irq);
snd_amd7930_free(amd);
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 1e3ae33..07bcfe4 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -16,6 +16,7 @@
#include <linux/firmware.h>
#include <linux/bitrev.h>
+#include <linux/kernel.h>
#include "firmware.h"
#include "chip.h"
@@ -59,21 +60,19 @@
unsigned int txt_offset; /* current position in txt_data */
};
-static u8 usb6fire_fw_ihex_nibble(const u8 n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
- else if (n >= 'A' && n <= 'F')
- return n - ('A' - 10);
- else if (n >= 'a' && n <= 'f')
- return n - ('a' - 10);
- return 0;
-}
-
static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc)
{
- u8 val = (usb6fire_fw_ihex_nibble(data[0]) << 4) |
- usb6fire_fw_ihex_nibble(data[1]);
+ u8 val = 0;
+ int hval;
+
+ hval = hex_to_bin(data[0]);
+ if (hval >= 0)
+ val |= (hval << 4);
+
+ hval = hex_to_bin(data[1]);
+ if (hval >= 0)
+ val |= hval;
+
*crc += val;
return val;
}
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 8beb775..3efc21c 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -67,6 +67,7 @@
* Native Instruments Guitar Rig mobile
* Native Instruments Traktor Kontrol X1
* Native Instruments Traktor Kontrol S4
+ * Native Instruments Maschine Controller
To compile this driver as a module, choose M here: the module
will be called snd-usb-caiaq.
@@ -85,6 +86,7 @@
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
* Native Instruments Traktor Kontrol S4
+ * Native Instruments Maschine Controller
config SND_USB_US122L
tristate "Tascam US-122L USB driver"
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index cf9ed664..ac256dc 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -3,16 +3,16 @@
#
snd-usb-audio-objs := card.o \
+ clock.o \
+ endpoint.o \
+ format.o \
+ helper.o \
mixer.o \
mixer_quirks.o \
+ pcm.o \
proc.o \
quirks.o \
- format.o \
- endpoint.o \
- urb.o \
- pcm.o \
- helper.o \
- clock.o
+ stream.o
snd-usbmidi-lib-objs := midi.o
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 45bc4a2..3eb605b 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -50,7 +50,8 @@
"{Native Instruments, Session I/O},"
"{Native Instruments, GuitarRig mobile}"
"{Native Instruments, Traktor Kontrol X1}"
- "{Native Instruments, Traktor Kontrol S4}");
+ "{Native Instruments, Traktor Kontrol S4}"
+ "{Native Instruments, Maschine Controller}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
@@ -146,6 +147,11 @@
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_TRAKTORAUDIO2
},
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_MASCHINECONTROLLER
+ },
{ /* terminator */ }
};
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index 3f9c633..562b0bf 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -18,6 +18,7 @@
#define USB_PID_TRAKTORKONTROLX1 0x2305
#define USB_PID_TRAKTORKONTROLS4 0xbaff
#define USB_PID_TRAKTORAUDIO2 0x041d
+#define USB_PID_MASCHINECONTROLLER 0x0808
#define EP1_BUFSIZE 64
#define EP4_BUFSIZE 512
diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c
index a213813..26a121b 100644
--- a/sound/usb/caiaq/input.c
+++ b/sound/usb/caiaq/input.c
@@ -67,6 +67,61 @@
KEY_BRL_DOT5
};
+#define MASCHINE_BUTTONS (42)
+#define MASCHINE_BUTTON(X) ((X) + BTN_MISC)
+#define MASCHINE_PADS (16)
+#define MASCHINE_PAD(X) ((X) + ABS_PRESSURE)
+
+static unsigned short keycode_maschine[] = {
+ MASCHINE_BUTTON(40), /* mute */
+ MASCHINE_BUTTON(39), /* solo */
+ MASCHINE_BUTTON(38), /* select */
+ MASCHINE_BUTTON(37), /* duplicate */
+ MASCHINE_BUTTON(36), /* navigate */
+ MASCHINE_BUTTON(35), /* pad mode */
+ MASCHINE_BUTTON(34), /* pattern */
+ MASCHINE_BUTTON(33), /* scene */
+ KEY_RESERVED, /* spacer */
+
+ MASCHINE_BUTTON(30), /* rec */
+ MASCHINE_BUTTON(31), /* erase */
+ MASCHINE_BUTTON(32), /* shift */
+ MASCHINE_BUTTON(28), /* grid */
+ MASCHINE_BUTTON(27), /* > */
+ MASCHINE_BUTTON(26), /* < */
+ MASCHINE_BUTTON(25), /* restart */
+
+ MASCHINE_BUTTON(21), /* E */
+ MASCHINE_BUTTON(22), /* F */
+ MASCHINE_BUTTON(23), /* G */
+ MASCHINE_BUTTON(24), /* H */
+ MASCHINE_BUTTON(20), /* D */
+ MASCHINE_BUTTON(19), /* C */
+ MASCHINE_BUTTON(18), /* B */
+ MASCHINE_BUTTON(17), /* A */
+
+ MASCHINE_BUTTON(0), /* control */
+ MASCHINE_BUTTON(2), /* browse */
+ MASCHINE_BUTTON(4), /* < */
+ MASCHINE_BUTTON(6), /* snap */
+ MASCHINE_BUTTON(7), /* autowrite */
+ MASCHINE_BUTTON(5), /* > */
+ MASCHINE_BUTTON(3), /* sampling */
+ MASCHINE_BUTTON(1), /* step */
+
+ MASCHINE_BUTTON(15), /* 8 softkeys */
+ MASCHINE_BUTTON(14),
+ MASCHINE_BUTTON(13),
+ MASCHINE_BUTTON(12),
+ MASCHINE_BUTTON(11),
+ MASCHINE_BUTTON(10),
+ MASCHINE_BUTTON(9),
+ MASCHINE_BUTTON(8),
+
+ MASCHINE_BUTTON(16), /* note repeat */
+ MASCHINE_BUTTON(29) /* play */
+};
+
#define KONTROLX1_INPUTS (40)
#define KONTROLS4_BUTTONS (12 * 8)
#define KONTROLS4_AXIS (46)
@@ -218,6 +273,29 @@
input_report_abs(input_dev, ABS_HAT3Y, i);
input_sync(input_dev);
break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+ /* 4 under the left screen */
+ input_report_abs(input_dev, ABS_HAT0X, decode_erp(buf[21], buf[20]));
+ input_report_abs(input_dev, ABS_HAT0Y, decode_erp(buf[15], buf[14]));
+ input_report_abs(input_dev, ABS_HAT1X, decode_erp(buf[9], buf[8]));
+ input_report_abs(input_dev, ABS_HAT1Y, decode_erp(buf[3], buf[2]));
+
+ /* 4 under the right screen */
+ input_report_abs(input_dev, ABS_HAT2X, decode_erp(buf[19], buf[18]));
+ input_report_abs(input_dev, ABS_HAT2Y, decode_erp(buf[13], buf[12]));
+ input_report_abs(input_dev, ABS_HAT3X, decode_erp(buf[7], buf[6]));
+ input_report_abs(input_dev, ABS_HAT3Y, decode_erp(buf[1], buf[0]));
+
+ /* volume */
+ input_report_abs(input_dev, ABS_RX, decode_erp(buf[17], buf[16]));
+ /* tempo */
+ input_report_abs(input_dev, ABS_RY, decode_erp(buf[11], buf[10]));
+ /* swing */
+ input_report_abs(input_dev, ABS_RZ, decode_erp(buf[5], buf[4]));
+
+ input_sync(input_dev);
+ break;
}
}
@@ -400,6 +478,25 @@
input_sync(dev->input_dev);
}
+#define MASCHINE_MSGBLOCK_SIZE 2
+
+static void snd_usb_caiaq_maschine_dispatch(struct snd_usb_caiaqdev *dev,
+ const unsigned char *buf,
+ unsigned int len)
+{
+ unsigned int i, pad_id;
+ uint16_t pressure;
+
+ for (i = 0; i < MASCHINE_PADS; i++) {
+ pressure = be16_to_cpu(buf[i * 2] << 8 | buf[(i * 2) + 1]);
+ pad_id = pressure >> 12;
+
+ input_report_abs(dev->input_dev, MASCHINE_PAD(pad_id), pressure & 0xfff);
+ }
+
+ input_sync(dev->input_dev);
+}
+
static void snd_usb_caiaq_ep4_reply_dispatch(struct urb *urb)
{
struct snd_usb_caiaqdev *dev = urb->context;
@@ -425,6 +522,13 @@
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
snd_usb_caiaq_tks4_dispatch(dev, buf, urb->actual_length);
break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+ if (urb->actual_length < (MASCHINE_PADS * MASCHINE_MSGBLOCK_SIZE))
+ goto requeue;
+
+ snd_usb_caiaq_maschine_dispatch(dev, buf, urb->actual_length);
+ break;
}
requeue:
@@ -444,6 +548,7 @@
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
if (usb_submit_urb(dev->ep4_in_urb, GFP_KERNEL) != 0)
return -EIO;
break;
@@ -462,6 +567,7 @@
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
usb_kill_urb(dev->ep4_in_urb);
break;
}
@@ -652,6 +758,50 @@
break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) |
+ BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) |
+ BIT_MASK(ABS_HAT2X) | BIT_MASK(ABS_HAT2Y) |
+ BIT_MASK(ABS_HAT3X) | BIT_MASK(ABS_HAT3Y) |
+ BIT_MASK(ABS_RX) | BIT_MASK(ABS_RY) |
+ BIT_MASK(ABS_RZ);
+
+ BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_maschine));
+ memcpy(dev->keycode, keycode_maschine, sizeof(keycode_maschine));
+ input->keycodemax = ARRAY_SIZE(keycode_maschine);
+
+ for (i = 0; i < MASCHINE_PADS; i++) {
+ input->absbit[0] |= MASCHINE_PAD(i);
+ input_set_abs_params(input, MASCHINE_PAD(i), 0, 0xfff, 5, 10);
+ }
+
+ input_set_abs_params(input, ABS_HAT0X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT0Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT1X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT1Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT2X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT2Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT3X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT3Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_RX, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_RY, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_RZ, 0, 999, 0, 10);
+
+ dev->ep4_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->ep4_in_urb) {
+ ret = -ENOMEM;
+ goto exit_free_idev;
+ }
+
+ usb_fill_bulk_urb(dev->ep4_in_urb, usb_dev,
+ usb_rcvbulkpipe(usb_dev, 0x4),
+ dev->ep4_in_buf, EP4_BUFSIZE,
+ snd_usb_caiaq_ep4_reply_dispatch, dev);
+
+ snd_usb_caiaq_set_auto_msg(dev, 1, 10, 5);
+ break;
+
default:
/* no input methods supported on this device */
goto exit_free_idev;
@@ -664,15 +814,17 @@
for (i = 0; i < input->keycodemax; i++)
__set_bit(dev->keycode[i], input->keybit);
+ dev->input_dev = input;
+
ret = input_register_device(input);
if (ret < 0)
goto exit_free_idev;
- dev->input_dev = input;
return 0;
exit_free_idev:
input_free_device(input);
+ dev->input_dev = NULL;
return ret;
}
@@ -688,4 +840,3 @@
input_unregister_device(dev->input_dev);
dev->input_dev = NULL;
}
-
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 3068f04..05c1aae 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -65,9 +65,9 @@
#include "helper.h"
#include "debug.h"
#include "pcm.h"
-#include "urb.h"
#include "format.h"
#include "power.h"
+#include "stream.h"
MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
MODULE_DESCRIPTION("USB Audio");
@@ -185,7 +185,7 @@
return -EINVAL;
}
- if (! snd_usb_parse_audio_endpoints(chip, interface)) {
+ if (! snd_usb_parse_audio_interface(chip, interface)) {
usb_set_interface(dev, interface, 0); /* reset the current interface */
usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
return -EINVAL;
diff --git a/sound/usb/card.h b/sound/usb/card.h
index ae4251d..a39edcc 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -94,6 +94,8 @@
spinlock_t lock;
struct snd_urb_ops ops; /* callbacks (must be filled at init) */
+ int last_frame_number; /* stored frame number */
+ int last_delay; /* stored delay */
};
struct snd_usb_stream {
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 075195e..379baad 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -91,7 +91,7 @@
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
UAC2_CX_CLOCK_SELECTOR << 8,
snd_usb_ctrl_intf(chip) | (selector_id << 8),
- &buf, sizeof(buf), 1000);
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
@@ -118,7 +118,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_CLOCK_VALID << 8,
snd_usb_ctrl_intf(chip) | (source_id << 8),
- &data, sizeof(data), 1000);
+ &data, sizeof(data));
if (err < 0) {
snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
@@ -222,7 +222,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
dev->devnum, iface, fmt->altsetting, rate, ep);
return err;
@@ -231,7 +231,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
dev->devnum, iface, fmt->altsetting, ep);
return 0; /* some devices don't support reading */
@@ -273,7 +273,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
dev->devnum, iface, fmt->altsetting, rate);
return err;
@@ -283,7 +283,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
return err;
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 7d46e48..81c6ede 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -15,436 +15,951 @@
*
*/
+#include <linux/gfp.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/audio.h>
-#include <linux/usb/audio-v2.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include "usbaudio.h"
-#include "card.h"
-#include "proc.h"
-#include "quirks.h"
-#include "endpoint.h"
-#include "urb.h"
-#include "pcm.h"
#include "helper.h"
-#include "format.h"
-#include "clock.h"
+#include "card.h"
+#include "endpoint.h"
+#include "pcm.h"
/*
- * free a substream
+ * convert a sampling rate into our full speed format (fs/1000 in Q16.16)
+ * this will overflow at approx 524 kHz
*/
-static void free_substream(struct snd_usb_substream *subs)
+static inline unsigned get_usb_full_speed_rate(unsigned int rate)
{
- struct list_head *p, *n;
-
- if (!subs->num_formats)
- return; /* not initialized */
- list_for_each_safe(p, n, &subs->fmt_list) {
- struct audioformat *fp = list_entry(p, struct audioformat, list);
- kfree(fp->rate_table);
- kfree(fp);
- }
- kfree(subs->rate_list.list);
+ return ((rate << 13) + 62) / 125;
}
-
/*
- * free a usb stream instance
+ * convert a sampling rate into USB high speed format (fs/8000 in Q16.16)
+ * this will overflow at approx 4 MHz
*/
-static void snd_usb_audio_stream_free(struct snd_usb_stream *stream)
+static inline unsigned get_usb_high_speed_rate(unsigned int rate)
{
- free_substream(&stream->substream[0]);
- free_substream(&stream->substream[1]);
- list_del(&stream->list);
- kfree(stream);
+ return ((rate << 10) + 62) / 125;
}
-static void snd_usb_audio_pcm_free(struct snd_pcm *pcm)
-{
- struct snd_usb_stream *stream = pcm->private_data;
- if (stream) {
- stream->pcm = NULL;
- snd_usb_audio_stream_free(stream);
- }
-}
-
-
/*
- * add this endpoint to the chip instance.
- * if a stream with the same endpoint already exists, append to it.
- * if not, create a new pcm stream.
+ * unlink active urbs.
*/
-int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct audioformat *fp)
+static int deactivate_urbs(struct snd_usb_substream *subs, int force, int can_sleep)
{
- struct list_head *p;
- struct snd_usb_stream *as;
- struct snd_usb_substream *subs;
- struct snd_pcm *pcm;
- int err;
+ struct snd_usb_audio *chip = subs->stream->chip;
+ unsigned int i;
+ int async;
- list_for_each(p, &chip->pcm_list) {
- as = list_entry(p, struct snd_usb_stream, list);
- if (as->fmt_type != fp->fmt_type)
- continue;
- subs = &as->substream[stream];
- if (!subs->endpoint)
- continue;
- if (subs->endpoint == fp->endpoint) {
- list_add_tail(&fp->list, &subs->fmt_list);
- subs->num_formats++;
- subs->formats |= fp->formats;
- return 0;
+ subs->running = 0;
+
+ if (!force && subs->stream->chip->shutdown) /* to be sure... */
+ return -EBADFD;
+
+ async = !can_sleep && chip->async_unlink;
+
+ if (!async && in_interrupt())
+ return 0;
+
+ for (i = 0; i < subs->nurbs; i++) {
+ if (test_bit(i, &subs->active_mask)) {
+ if (!test_and_set_bit(i, &subs->unlink_mask)) {
+ struct urb *u = subs->dataurb[i].urb;
+ if (async)
+ usb_unlink_urb(u);
+ else
+ usb_kill_urb(u);
+ }
}
}
- /* look for an empty stream */
- list_for_each(p, &chip->pcm_list) {
- as = list_entry(p, struct snd_usb_stream, list);
- if (as->fmt_type != fp->fmt_type)
- continue;
- subs = &as->substream[stream];
- if (subs->endpoint)
- continue;
- err = snd_pcm_new_stream(as->pcm, stream, 1);
- if (err < 0)
- return err;
- snd_usb_init_substream(as, stream, fp);
- return 0;
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ if (test_bit(i+16, &subs->active_mask)) {
+ if (!test_and_set_bit(i+16, &subs->unlink_mask)) {
+ struct urb *u = subs->syncurb[i].urb;
+ if (async)
+ usb_unlink_urb(u);
+ else
+ usb_kill_urb(u);
+ }
+ }
+ }
}
+ return 0;
+}
- /* create a new pcm */
- as = kzalloc(sizeof(*as), GFP_KERNEL);
- if (!as)
- return -ENOMEM;
- as->pcm_index = chip->pcm_devs;
- as->chip = chip;
- as->fmt_type = fp->fmt_type;
- err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs,
- stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0,
- stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1,
- &pcm);
- if (err < 0) {
- kfree(as);
- return err;
+
+/*
+ * release a urb data
+ */
+static void release_urb_ctx(struct snd_urb_ctx *u)
+{
+ if (u->urb) {
+ if (u->buffer_size)
+ usb_free_coherent(u->subs->dev, u->buffer_size,
+ u->urb->transfer_buffer,
+ u->urb->transfer_dma);
+ usb_free_urb(u->urb);
+ u->urb = NULL;
}
- as->pcm = pcm;
- pcm->private_data = as;
- pcm->private_free = snd_usb_audio_pcm_free;
- pcm->info_flags = 0;
- if (chip->pcm_devs > 0)
- sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs);
+}
+
+/*
+ * wait until all urbs are processed.
+ */
+static int wait_clear_urbs(struct snd_usb_substream *subs)
+{
+ unsigned long end_time = jiffies + msecs_to_jiffies(1000);
+ unsigned int i;
+ int alive;
+
+ do {
+ alive = 0;
+ for (i = 0; i < subs->nurbs; i++) {
+ if (test_bit(i, &subs->active_mask))
+ alive++;
+ }
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ if (test_bit(i + 16, &subs->active_mask))
+ alive++;
+ }
+ }
+ if (! alive)
+ break;
+ schedule_timeout_uninterruptible(1);
+ } while (time_before(jiffies, end_time));
+ if (alive)
+ snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive);
+ return 0;
+}
+
+/*
+ * release a substream
+ */
+void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force)
+{
+ int i;
+
+ /* stop urbs (to be sure) */
+ deactivate_urbs(subs, force, 1);
+ wait_clear_urbs(subs);
+
+ for (i = 0; i < MAX_URBS; i++)
+ release_urb_ctx(&subs->dataurb[i]);
+ for (i = 0; i < SYNC_URBS; i++)
+ release_urb_ctx(&subs->syncurb[i]);
+ usb_free_coherent(subs->dev, SYNC_URBS * 4,
+ subs->syncbuf, subs->sync_dma);
+ subs->syncbuf = NULL;
+ subs->nurbs = 0;
+}
+
+/*
+ * complete callback from data urb
+ */
+static void snd_complete_urb(struct urb *urb)
+{
+ struct snd_urb_ctx *ctx = urb->context;
+ struct snd_usb_substream *subs = ctx->subs;
+ struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
+ int err = 0;
+
+ if ((subs->running && subs->ops.retire(subs, substream->runtime, urb)) ||
+ !subs->running || /* can be stopped during retire callback */
+ (err = subs->ops.prepare(subs, substream->runtime, urb)) < 0 ||
+ (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ clear_bit(ctx->index, &subs->active_mask);
+ if (err < 0) {
+ snd_printd(KERN_ERR "cannot submit urb (err = %d)\n", err);
+ snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+ }
+ }
+}
+
+
+/*
+ * complete callback from sync urb
+ */
+static void snd_complete_sync_urb(struct urb *urb)
+{
+ struct snd_urb_ctx *ctx = urb->context;
+ struct snd_usb_substream *subs = ctx->subs;
+ struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
+ int err = 0;
+
+ if ((subs->running && subs->ops.retire_sync(subs, substream->runtime, urb)) ||
+ !subs->running || /* can be stopped during retire callback */
+ (err = subs->ops.prepare_sync(subs, substream->runtime, urb)) < 0 ||
+ (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ clear_bit(ctx->index + 16, &subs->active_mask);
+ if (err < 0) {
+ snd_printd(KERN_ERR "cannot submit sync urb (err = %d)\n", err);
+ snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+ }
+ }
+}
+
+
+/*
+ * initialize a substream for plaback/capture
+ */
+int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
+ unsigned int period_bytes,
+ unsigned int rate,
+ unsigned int frame_bits)
+{
+ unsigned int maxsize, i;
+ int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK;
+ unsigned int urb_packs, total_packs, packs_per_ms;
+ struct snd_usb_audio *chip = subs->stream->chip;
+
+ /* calculate the frequency in 16.16 format */
+ if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+ subs->freqn = get_usb_full_speed_rate(rate);
else
- strcpy(pcm->name, "USB Audio");
+ subs->freqn = get_usb_high_speed_rate(rate);
+ subs->freqm = subs->freqn;
+ subs->freqshift = INT_MIN;
+ /* calculate max. frequency */
+ if (subs->maxpacksize) {
+ /* whatever fits into a max. size packet */
+ maxsize = subs->maxpacksize;
+ subs->freqmax = (maxsize / (frame_bits >> 3))
+ << (16 - subs->datainterval);
+ } else {
+ /* no max. packet size: just take 25% higher than nominal */
+ subs->freqmax = subs->freqn + (subs->freqn >> 2);
+ maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3))
+ >> (16 - subs->datainterval);
+ }
+ subs->phase = 0;
- snd_usb_init_substream(as, stream, fp);
+ if (subs->fill_max)
+ subs->curpacksize = subs->maxpacksize;
+ else
+ subs->curpacksize = maxsize;
- list_add(&as->list, &chip->pcm_list);
- chip->pcm_devs++;
+ if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
+ packs_per_ms = 8 >> subs->datainterval;
+ else
+ packs_per_ms = 1;
- snd_usb_proc_pcm_format_add(as);
+ if (is_playback) {
+ urb_packs = max(chip->nrpacks, 1);
+ urb_packs = min(urb_packs, (unsigned int)MAX_PACKS);
+ } else
+ urb_packs = 1;
+ urb_packs *= packs_per_ms;
+ if (subs->syncpipe)
+ urb_packs = min(urb_packs, 1U << subs->syncinterval);
+
+ /* decide how many packets to be used */
+ if (is_playback) {
+ unsigned int minsize, maxpacks;
+ /* determine how small a packet can be */
+ minsize = (subs->freqn >> (16 - subs->datainterval))
+ * (frame_bits >> 3);
+ /* with sync from device, assume it can be 12% lower */
+ if (subs->syncpipe)
+ minsize -= minsize >> 3;
+ minsize = max(minsize, 1u);
+ total_packs = (period_bytes + minsize - 1) / minsize;
+ /* we need at least two URBs for queueing */
+ if (total_packs < 2) {
+ total_packs = 2;
+ } else {
+ /* and we don't want too long a queue either */
+ maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2);
+ total_packs = min(total_packs, maxpacks);
+ }
+ } else {
+ while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
+ urb_packs >>= 1;
+ total_packs = MAX_URBS * urb_packs;
+ }
+ subs->nurbs = (total_packs + urb_packs - 1) / urb_packs;
+ if (subs->nurbs > MAX_URBS) {
+ /* too much... */
+ subs->nurbs = MAX_URBS;
+ total_packs = MAX_URBS * urb_packs;
+ } else if (subs->nurbs < 2) {
+ /* too little - we need at least two packets
+ * to ensure contiguous playback/capture
+ */
+ subs->nurbs = 2;
+ }
+
+ /* allocate and initialize data urbs */
+ for (i = 0; i < subs->nurbs; i++) {
+ struct snd_urb_ctx *u = &subs->dataurb[i];
+ u->index = i;
+ u->subs = subs;
+ u->packets = (i + 1) * total_packs / subs->nurbs
+ - i * total_packs / subs->nurbs;
+ u->buffer_size = maxsize * u->packets;
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II)
+ u->packets++; /* for transfer delimiter */
+ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
+ if (!u->urb)
+ goto out_of_memory;
+ u->urb->transfer_buffer =
+ usb_alloc_coherent(subs->dev, u->buffer_size,
+ GFP_KERNEL, &u->urb->transfer_dma);
+ if (!u->urb->transfer_buffer)
+ goto out_of_memory;
+ u->urb->pipe = subs->datapipe;
+ u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ u->urb->interval = 1 << subs->datainterval;
+ u->urb->context = u;
+ u->urb->complete = snd_complete_urb;
+ }
+
+ if (subs->syncpipe) {
+ /* allocate and initialize sync urbs */
+ subs->syncbuf = usb_alloc_coherent(subs->dev, SYNC_URBS * 4,
+ GFP_KERNEL, &subs->sync_dma);
+ if (!subs->syncbuf)
+ goto out_of_memory;
+ for (i = 0; i < SYNC_URBS; i++) {
+ struct snd_urb_ctx *u = &subs->syncurb[i];
+ u->index = i;
+ u->subs = subs;
+ u->packets = 1;
+ u->urb = usb_alloc_urb(1, GFP_KERNEL);
+ if (!u->urb)
+ goto out_of_memory;
+ u->urb->transfer_buffer = subs->syncbuf + i * 4;
+ u->urb->transfer_dma = subs->sync_dma + i * 4;
+ u->urb->transfer_buffer_length = 4;
+ u->urb->pipe = subs->syncpipe;
+ u->urb->transfer_flags = URB_ISO_ASAP |
+ URB_NO_TRANSFER_DMA_MAP;
+ u->urb->number_of_packets = 1;
+ u->urb->interval = 1 << subs->syncinterval;
+ u->urb->context = u;
+ u->urb->complete = snd_complete_sync_urb;
+ }
+ }
+ return 0;
+
+out_of_memory:
+ snd_usb_release_substream_urbs(subs, 0);
+ return -ENOMEM;
+}
+
+/*
+ * prepare urb for full speed capture sync pipe
+ *
+ * fill the length and offset of each urb descriptor.
+ * the fixed 10.14 frequency is passed through the pipe.
+ */
+static int prepare_capture_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned char *cp = urb->transfer_buffer;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->iso_frame_desc[0].length = 3;
+ urb->iso_frame_desc[0].offset = 0;
+ cp[0] = subs->freqn >> 2;
+ cp[1] = subs->freqn >> 10;
+ cp[2] = subs->freqn >> 18;
+ return 0;
+}
+
+/*
+ * prepare urb for high speed capture sync pipe
+ *
+ * fill the length and offset of each urb descriptor.
+ * the fixed 12.13 frequency is passed as 16.16 through the pipe.
+ */
+static int prepare_capture_sync_urb_hs(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned char *cp = urb->transfer_buffer;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->iso_frame_desc[0].length = 4;
+ urb->iso_frame_desc[0].offset = 0;
+ cp[0] = subs->freqn;
+ cp[1] = subs->freqn >> 8;
+ cp[2] = subs->freqn >> 16;
+ cp[3] = subs->freqn >> 24;
+ return 0;
+}
+
+/*
+ * process after capture sync complete
+ * - nothing to do
+ */
+static int retire_capture_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ return 0;
+}
+
+/*
+ * prepare urb for capture data pipe
+ *
+ * fill the offset and length of each descriptor.
+ *
+ * we use a temporary buffer to write the captured data.
+ * since the length of written data is determined by host, we cannot
+ * write onto the pcm buffer directly... the data is thus copied
+ * later at complete callback to the global buffer.
+ */
+static int prepare_capture_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ int i, offs;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ offs = 0;
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ for (i = 0; i < ctx->packets; i++) {
+ urb->iso_frame_desc[i].offset = offs;
+ urb->iso_frame_desc[i].length = subs->curpacksize;
+ offs += subs->curpacksize;
+ }
+ urb->transfer_buffer_length = offs;
+ urb->number_of_packets = ctx->packets;
+ return 0;
+}
+
+/*
+ * process after capture complete
+ *
+ * copy the data from each desctiptor to the pcm buffer, and
+ * update the current position.
+ */
+static int retire_capture_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned long flags;
+ unsigned char *cp;
+ int i;
+ unsigned int stride, frames, bytes, oldptr;
+ int period_elapsed = 0;
+
+ stride = runtime->frame_bits >> 3;
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ if (urb->iso_frame_desc[i].status) {
+ snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
+ // continue;
+ }
+ bytes = urb->iso_frame_desc[i].actual_length;
+ frames = bytes / stride;
+ if (!subs->txfr_quirk)
+ bytes = frames * stride;
+ if (bytes % (runtime->sample_bits >> 3) != 0) {
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+ int oldbytes = bytes;
+#endif
+ bytes = frames * stride;
+ snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
+ oldbytes, bytes);
+ }
+ /* update the current pointer */
+ spin_lock_irqsave(&subs->lock, flags);
+ oldptr = subs->hwptr_done;
+ subs->hwptr_done += bytes;
+ if (subs->hwptr_done >= runtime->buffer_size * stride)
+ subs->hwptr_done -= runtime->buffer_size * stride;
+ frames = (bytes + (oldptr % stride)) / stride;
+ subs->transfer_done += frames;
+ if (subs->transfer_done >= runtime->period_size) {
+ subs->transfer_done -= runtime->period_size;
+ period_elapsed = 1;
+ }
+ spin_unlock_irqrestore(&subs->lock, flags);
+ /* copy a data chunk */
+ if (oldptr + bytes > runtime->buffer_size * stride) {
+ unsigned int bytes1 =
+ runtime->buffer_size * stride - oldptr;
+ memcpy(runtime->dma_area + oldptr, cp, bytes1);
+ memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1);
+ } else {
+ memcpy(runtime->dma_area + oldptr, cp, bytes);
+ }
+ }
+ if (period_elapsed)
+ snd_pcm_period_elapsed(subs->pcm_substream);
+ return 0;
+}
+
+/*
+ * Process after capture complete when paused. Nothing to do.
+ */
+static int retire_paused_capture_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ return 0;
+}
+
+
+/*
+ * prepare urb for playback sync pipe
+ *
+ * set up the offset and length to receive the current frequency.
+ */
+static int prepare_playback_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ struct snd_urb_ctx *ctx = urb->context;
+
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->iso_frame_desc[0].length = min(4u, ctx->subs->syncmaxsize);
+ urb->iso_frame_desc[0].offset = 0;
+ return 0;
+}
+
+/*
+ * process after playback sync complete
+ *
+ * Full speed devices report feedback values in 10.14 format as samples per
+ * frame, high speed devices in 16.16 format as samples per microframe.
+ * Because the Audio Class 1 spec was written before USB 2.0, many high speed
+ * devices use a wrong interpretation, some others use an entirely different
+ * format. Therefore, we cannot predict what format any particular device uses
+ * and must detect it automatically.
+ */
+static int retire_playback_sync_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned int f;
+ int shift;
+ unsigned long flags;
+
+ if (urb->iso_frame_desc[0].status != 0 ||
+ urb->iso_frame_desc[0].actual_length < 3)
+ return 0;
+
+ f = le32_to_cpup(urb->transfer_buffer);
+ if (urb->iso_frame_desc[0].actual_length == 3)
+ f &= 0x00ffffff;
+ else
+ f &= 0x0fffffff;
+ if (f == 0)
+ return 0;
+
+ if (unlikely(subs->freqshift == INT_MIN)) {
+ /*
+ * The first time we see a feedback value, determine its format
+ * by shifting it left or right until it matches the nominal
+ * frequency value. This assumes that the feedback does not
+ * differ from the nominal value more than +50% or -25%.
+ */
+ shift = 0;
+ while (f < subs->freqn - subs->freqn / 4) {
+ f <<= 1;
+ shift++;
+ }
+ while (f > subs->freqn + subs->freqn / 2) {
+ f >>= 1;
+ shift--;
+ }
+ subs->freqshift = shift;
+ }
+ else if (subs->freqshift >= 0)
+ f <<= subs->freqshift;
+ else
+ f >>= -subs->freqshift;
+
+ if (likely(f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax)) {
+ /*
+ * If the frequency looks valid, set it.
+ * This value is referred to in prepare_playback_urb().
+ */
+ spin_lock_irqsave(&subs->lock, flags);
+ subs->freqm = f;
+ spin_unlock_irqrestore(&subs->lock, flags);
+ } else {
+ /*
+ * Out of range; maybe the shift value is wrong.
+ * Reset it so that we autodetect again the next time.
+ */
+ subs->freqshift = INT_MIN;
+ }
return 0;
}
-static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
- struct usb_host_interface *alts,
- int protocol, int iface_no)
+/* determine the number of frames in the next packet */
+static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs)
{
- /* parsed with a v1 header here. that's ok as we only look at the
- * header first which is the same for both versions */
- struct uac_iso_endpoint_descriptor *csep;
- struct usb_interface_descriptor *altsd = get_iface_desc(alts);
- int attributes = 0;
+ if (subs->fill_max)
+ return subs->maxframesize;
+ else {
+ subs->phase = (subs->phase & 0xffff)
+ + (subs->freqm << subs->datainterval);
+ return min(subs->phase >> 16, subs->maxframesize);
+ }
+}
- csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
+/*
+ * Prepare urb for streaming before playback starts or when paused.
+ *
+ * We don't have any data, so we send silence.
+ */
+static int prepare_nodata_playback_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned int i, offs, counts;
+ struct snd_urb_ctx *ctx = urb->context;
+ int stride = runtime->frame_bits >> 3;
- /* Creamware Noah has this descriptor after the 2nd endpoint */
- if (!csep && altsd->bNumEndpoints >= 2)
- csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
+ offs = 0;
+ urb->dev = ctx->subs->dev;
+ for (i = 0; i < ctx->packets; ++i) {
+ counts = snd_usb_audio_next_packet_size(subs);
+ urb->iso_frame_desc[i].offset = offs * stride;
+ urb->iso_frame_desc[i].length = counts * stride;
+ offs += counts;
+ }
+ urb->number_of_packets = ctx->packets;
+ urb->transfer_buffer_length = offs * stride;
+ memset(urb->transfer_buffer,
+ runtime->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0,
+ offs * stride);
+ return 0;
+}
- if (!csep || csep->bLength < 7 ||
- csep->bDescriptorSubtype != UAC_EP_GENERAL) {
- snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
- " class specific endpoint descriptor\n",
- chip->dev->devnum, iface_no,
- altsd->bAlternateSetting);
+/*
+ * prepare urb for playback data pipe
+ *
+ * Since a URB can handle only a single linear buffer, we must use double
+ * buffering when the data to be transferred overflows the buffer boundary.
+ * To avoid inconsistencies when updating hwptr_done, we use double buffering
+ * for all URBs.
+ */
+static int prepare_playback_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ int i, stride;
+ unsigned int counts, frames, bytes;
+ unsigned long flags;
+ int period_elapsed = 0;
+ struct snd_urb_ctx *ctx = urb->context;
+
+ stride = runtime->frame_bits >> 3;
+
+ frames = 0;
+ urb->dev = ctx->subs->dev; /* we need to set this at each time */
+ urb->number_of_packets = 0;
+ spin_lock_irqsave(&subs->lock, flags);
+ for (i = 0; i < ctx->packets; i++) {
+ counts = snd_usb_audio_next_packet_size(subs);
+ /* set up descriptor */
+ urb->iso_frame_desc[i].offset = frames * stride;
+ urb->iso_frame_desc[i].length = counts * stride;
+ frames += counts;
+ urb->number_of_packets++;
+ subs->transfer_done += counts;
+ if (subs->transfer_done >= runtime->period_size) {
+ subs->transfer_done -= runtime->period_size;
+ period_elapsed = 1;
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II) {
+ if (subs->transfer_done > 0) {
+ /* FIXME: fill-max mode is not
+ * supported yet */
+ frames -= subs->transfer_done;
+ counts -= subs->transfer_done;
+ urb->iso_frame_desc[i].length =
+ counts * stride;
+ subs->transfer_done = 0;
+ }
+ i++;
+ if (i < ctx->packets) {
+ /* add a transfer delimiter */
+ urb->iso_frame_desc[i].offset =
+ frames * stride;
+ urb->iso_frame_desc[i].length = 0;
+ urb->number_of_packets++;
+ }
+ break;
+ }
+ }
+ if (period_elapsed) /* finish at the period boundary */
+ break;
+ }
+ bytes = frames * stride;
+ if (subs->hwptr_done + bytes > runtime->buffer_size * stride) {
+ /* err, the transferred area goes over buffer boundary. */
+ unsigned int bytes1 =
+ runtime->buffer_size * stride - subs->hwptr_done;
+ memcpy(urb->transfer_buffer,
+ runtime->dma_area + subs->hwptr_done, bytes1);
+ memcpy(urb->transfer_buffer + bytes1,
+ runtime->dma_area, bytes - bytes1);
+ } else {
+ memcpy(urb->transfer_buffer,
+ runtime->dma_area + subs->hwptr_done, bytes);
+ }
+ subs->hwptr_done += bytes;
+ if (subs->hwptr_done >= runtime->buffer_size * stride)
+ subs->hwptr_done -= runtime->buffer_size * stride;
+
+ /* update delay with exact number of samples queued */
+ runtime->delay = subs->last_delay;
+ runtime->delay += frames;
+ subs->last_delay = runtime->delay;
+
+ /* realign last_frame_number */
+ subs->last_frame_number = usb_get_current_frame_number(subs->dev);
+ subs->last_frame_number &= 0xFF; /* keep 8 LSBs */
+
+ spin_unlock_irqrestore(&subs->lock, flags);
+ urb->transfer_buffer_length = bytes;
+ if (period_elapsed)
+ snd_pcm_period_elapsed(subs->pcm_substream);
+ return 0;
+}
+
+/*
+ * process after playback data complete
+ * - decrease the delay count again
+ */
+static int retire_playback_urb(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned long flags;
+ int stride = runtime->frame_bits >> 3;
+ int processed = urb->transfer_buffer_length / stride;
+ int est_delay;
+
+ spin_lock_irqsave(&subs->lock, flags);
+
+ est_delay = snd_usb_pcm_delay(subs, runtime->rate);
+ /* update delay with exact number of samples played */
+ if (processed > subs->last_delay)
+ subs->last_delay = 0;
+ else
+ subs->last_delay -= processed;
+ runtime->delay = subs->last_delay;
+
+ /*
+ * Report when delay estimate is off by more than 2ms.
+ * The error should be lower than 2ms since the estimate relies
+ * on two reads of a counter updated every ms.
+ */
+ if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
+ snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n",
+ est_delay, subs->last_delay);
+
+ spin_unlock_irqrestore(&subs->lock, flags);
+ return 0;
+}
+
+static const char *usb_error_string(int err)
+{
+ switch (err) {
+ case -ENODEV:
+ return "no device";
+ case -ENOENT:
+ return "endpoint not enabled";
+ case -EPIPE:
+ return "endpoint stalled";
+ case -ENOSPC:
+ return "not enough bandwidth";
+ case -ESHUTDOWN:
+ return "device disabled";
+ case -EHOSTUNREACH:
+ return "device suspended";
+ case -EINVAL:
+ case -EAGAIN:
+ case -EFBIG:
+ case -EMSGSIZE:
+ return "internal error";
+ default:
+ return "unknown error";
+ }
+}
+
+/*
+ * set up and start data/sync urbs
+ */
+static int start_urbs(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime)
+{
+ unsigned int i;
+ int err;
+
+ if (subs->stream->chip->shutdown)
+ return -EBADFD;
+
+ for (i = 0; i < subs->nurbs; i++) {
+ if (snd_BUG_ON(!subs->dataurb[i].urb))
+ return -EINVAL;
+ if (subs->ops.prepare(subs, runtime, subs->dataurb[i].urb) < 0) {
+ snd_printk(KERN_ERR "cannot prepare datapipe for urb %d\n", i);
+ goto __error;
+ }
+ }
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ if (snd_BUG_ON(!subs->syncurb[i].urb))
+ return -EINVAL;
+ if (subs->ops.prepare_sync(subs, runtime, subs->syncurb[i].urb) < 0) {
+ snd_printk(KERN_ERR "cannot prepare syncpipe for urb %d\n", i);
+ goto __error;
+ }
+ }
+ }
+
+ subs->active_mask = 0;
+ subs->unlink_mask = 0;
+ subs->running = 1;
+ for (i = 0; i < subs->nurbs; i++) {
+ err = usb_submit_urb(subs->dataurb[i].urb, GFP_ATOMIC);
+ if (err < 0) {
+ snd_printk(KERN_ERR "cannot submit datapipe "
+ "for urb %d, error %d: %s\n",
+ i, err, usb_error_string(err));
+ goto __error;
+ }
+ set_bit(i, &subs->active_mask);
+ }
+ if (subs->syncpipe) {
+ for (i = 0; i < SYNC_URBS; i++) {
+ err = usb_submit_urb(subs->syncurb[i].urb, GFP_ATOMIC);
+ if (err < 0) {
+ snd_printk(KERN_ERR "cannot submit syncpipe "
+ "for urb %d, error %d: %s\n",
+ i, err, usb_error_string(err));
+ goto __error;
+ }
+ set_bit(i + 16, &subs->active_mask);
+ }
+ }
+ return 0;
+
+ __error:
+ // snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN);
+ deactivate_urbs(subs, 0, 0);
+ return -EPIPE;
+}
+
+
+/*
+ */
+static struct snd_urb_ops audio_urb_ops[2] = {
+ {
+ .prepare = prepare_nodata_playback_urb,
+ .retire = retire_playback_urb,
+ .prepare_sync = prepare_playback_sync_urb,
+ .retire_sync = retire_playback_sync_urb,
+ },
+ {
+ .prepare = prepare_capture_urb,
+ .retire = retire_capture_urb,
+ .prepare_sync = prepare_capture_sync_urb,
+ .retire_sync = retire_capture_sync_urb,
+ },
+};
+
+/*
+ * initialize the substream instance.
+ */
+
+void snd_usb_init_substream(struct snd_usb_stream *as,
+ int stream, struct audioformat *fp)
+{
+ struct snd_usb_substream *subs = &as->substream[stream];
+
+ INIT_LIST_HEAD(&subs->fmt_list);
+ spin_lock_init(&subs->lock);
+
+ subs->stream = as;
+ subs->direction = stream;
+ subs->dev = as->chip->dev;
+ subs->txfr_quirk = as->chip->txfr_quirk;
+ subs->ops = audio_urb_ops[stream];
+ if (snd_usb_get_speed(subs->dev) >= USB_SPEED_HIGH)
+ subs->ops.prepare_sync = prepare_capture_sync_urb_hs;
+
+ snd_usb_set_pcm_ops(as->pcm, stream);
+
+ list_add_tail(&fp->list, &subs->fmt_list);
+ subs->formats |= fp->formats;
+ subs->endpoint = fp->endpoint;
+ subs->num_formats++;
+ subs->fmt_type = fp->fmt_type;
+}
+
+int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_usb_substream *subs = substream->runtime->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ subs->ops.prepare = prepare_playback_urb;
+ return 0;
+ case SNDRV_PCM_TRIGGER_STOP:
+ return deactivate_urbs(subs, 0, 0);
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ subs->ops.prepare = prepare_nodata_playback_urb;
return 0;
}
- if (protocol == UAC_VERSION_1) {
- attributes = csep->bmAttributes;
- } else {
- struct uac2_iso_endpoint_descriptor *csep2 =
- (struct uac2_iso_endpoint_descriptor *) csep;
-
- attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
-
- /* emulate the endpoint attributes of a v1 device */
- if (csep2->bmControls & UAC2_CONTROL_PITCH)
- attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
- }
-
- return attributes;
+ return -EINVAL;
}
-static struct uac2_input_terminal_descriptor *
- snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id)
+int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
{
- struct uac2_input_terminal_descriptor *term = NULL;
+ struct snd_usb_substream *subs = substream->runtime->private_data;
- while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
- ctrl_iface->extralen,
- term, UAC_INPUT_TERMINAL))) {
- if (term->bTerminalID == terminal_id)
- return term;
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ subs->ops.retire = retire_capture_urb;
+ return start_urbs(subs, substream->runtime);
+ case SNDRV_PCM_TRIGGER_STOP:
+ return deactivate_urbs(subs, 0, 0);
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ subs->ops.retire = retire_paused_capture_urb;
+ return 0;
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ subs->ops.retire = retire_capture_urb;
+ return 0;
}
- return NULL;
+ return -EINVAL;
}
-static struct uac2_output_terminal_descriptor *
- snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id)
+int snd_usb_substream_prepare(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime)
{
- struct uac2_output_terminal_descriptor *term = NULL;
+ /* clear urbs (to be sure) */
+ deactivate_urbs(subs, 0, 1);
+ wait_clear_urbs(subs);
- while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
- ctrl_iface->extralen,
- term, UAC_OUTPUT_TERMINAL))) {
- if (term->bTerminalID == terminal_id)
- return term;
+ /* for playback, submit the URBs now; otherwise, the first hwptr_done
+ * updates for all URBs would happen at the same time when starting */
+ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ subs->ops.prepare = prepare_nodata_playback_urb;
+ return start_urbs(subs, runtime);
}
- return NULL;
-}
-
-int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
-{
- struct usb_device *dev;
- struct usb_interface *iface;
- struct usb_host_interface *alts;
- struct usb_interface_descriptor *altsd;
- int i, altno, err, stream;
- int format = 0, num_channels = 0;
- struct audioformat *fp = NULL;
- int num, protocol, clock = 0;
- struct uac_format_type_i_continuous_descriptor *fmt;
-
- dev = chip->dev;
-
- /* parse the interface's altsettings */
- iface = usb_ifnum_to_if(dev, iface_no);
-
- num = iface->num_altsetting;
-
- /*
- * Dallas DS4201 workaround: It presents 5 altsettings, but the last
- * one misses syncpipe, and does not produce any sound.
- */
- if (chip->usb_id == USB_ID(0x04fa, 0x4201))
- num = 4;
-
- for (i = 0; i < num; i++) {
- alts = &iface->altsetting[i];
- altsd = get_iface_desc(alts);
- protocol = altsd->bInterfaceProtocol;
- /* skip invalid one */
- if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
- altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
- (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
- altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
- altsd->bNumEndpoints < 1 ||
- le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
- continue;
- /* must be isochronous */
- if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
- USB_ENDPOINT_XFER_ISOC)
- continue;
- /* check direction */
- stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ?
- SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- altno = altsd->bAlternateSetting;
-
- if (snd_usb_apply_interface_quirk(chip, iface_no, altno))
- continue;
-
- /* get audio formats */
- switch (protocol) {
- default:
- snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
- dev->devnum, iface_no, altno, protocol);
- protocol = UAC_VERSION_1;
- /* fall through */
-
- case UAC_VERSION_1: {
- struct uac1_as_header_descriptor *as =
- snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
-
- if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
- dev->devnum, iface_no, altno);
- continue;
- }
-
- if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
- dev->devnum, iface_no, altno);
- continue;
- }
-
- format = le16_to_cpu(as->wFormatTag); /* remember the format value */
- break;
- }
-
- case UAC_VERSION_2: {
- struct uac2_input_terminal_descriptor *input_term;
- struct uac2_output_terminal_descriptor *output_term;
- struct uac2_as_header_descriptor *as =
- snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
-
- if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
- dev->devnum, iface_no, altno);
- continue;
- }
-
- if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
- dev->devnum, iface_no, altno);
- continue;
- }
-
- num_channels = as->bNrChannels;
- format = le32_to_cpu(as->bmFormats);
-
- /* lookup the terminal associated to this interface
- * to extract the clock */
- input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
- if (input_term) {
- clock = input_term->bCSourceID;
- break;
- }
-
- output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
- if (output_term) {
- clock = output_term->bCSourceID;
- break;
- }
-
- snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
- dev->devnum, iface_no, altno, as->bTerminalLink);
- continue;
- }
- }
-
- /* get format type */
- fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
- if (!fmt) {
- snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
- dev->devnum, iface_no, altno);
- continue;
- }
- if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
- ((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
- dev->devnum, iface_no, altno);
- continue;
- }
-
- /*
- * Blue Microphones workaround: The last altsetting is identical
- * with the previous one, except for a larger packet size, but
- * is actually a mislabeled two-channel setting; ignore it.
- */
- if (fmt->bNrChannels == 1 &&
- fmt->bSubframeSize == 2 &&
- altno == 2 && num == 3 &&
- fp && fp->altsetting == 1 && fp->channels == 1 &&
- fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
- protocol == UAC_VERSION_1 &&
- le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
- fp->maxpacksize * 2)
- continue;
-
- fp = kzalloc(sizeof(*fp), GFP_KERNEL);
- if (! fp) {
- snd_printk(KERN_ERR "cannot malloc\n");
- return -ENOMEM;
- }
-
- fp->iface = iface_no;
- fp->altsetting = altno;
- fp->altset_idx = i;
- fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
- fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
- fp->datainterval = snd_usb_parse_datainterval(chip, alts);
- fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
- /* num_channels is only set for v2 interfaces */
- fp->channels = num_channels;
- if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
- fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
- * (fp->maxpacksize & 0x7ff);
- fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
- fp->clock = clock;
-
- /* some quirks for attributes here */
-
- switch (chip->usb_id) {
- case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
- /* Optoplay sets the sample rate attribute although
- * it seems not supporting it in fact.
- */
- fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
- break;
- case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
- case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
- /* doesn't set the sample rate attribute, but supports it */
- fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
- break;
- case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
- case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
- case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
- case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
- an older model 77d:223) */
- /*
- * plantronics headset and Griffin iMic have set adaptive-in
- * although it's really not...
- */
- fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
- if (stream == SNDRV_PCM_STREAM_PLAYBACK)
- fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
- else
- fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
- break;
- }
-
- /* ok, let's parse further... */
- if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
- kfree(fp->rate_table);
- kfree(fp);
- fp = NULL;
- continue;
- }
-
- snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
- err = snd_usb_add_audio_endpoint(chip, stream, fp);
- if (err < 0) {
- kfree(fp->rate_table);
- kfree(fp);
- return err;
- }
- /* try to set the interface... */
- usb_set_interface(chip->dev, iface_no, altno);
- snd_usb_init_pitch(chip, iface_no, alts, fp);
- snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
- }
return 0;
}
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
index 64dd0db..88eb63a 100644
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -1,11 +1,21 @@
#ifndef __USBAUDIO_ENDPOINT_H
#define __USBAUDIO_ENDPOINT_H
-int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip,
- int iface_no);
+void snd_usb_init_substream(struct snd_usb_stream *as,
+ int stream,
+ struct audioformat *fp);
-int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip,
- int stream,
- struct audioformat *fp);
+int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
+ unsigned int period_bytes,
+ unsigned int rate,
+ unsigned int frame_bits);
+
+void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force);
+
+int snd_usb_substream_prepare(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime);
+
+int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd);
+int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd);
#endif /* __USBAUDIO_ENDPOINT_H */
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 8d042dc..89421d1 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -286,7 +286,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- tmp, sizeof(tmp), 1000);
+ tmp, sizeof(tmp));
if (ret < 0) {
snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
@@ -307,7 +307,7 @@
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, data_size, 1000);
+ data, data_size);
if (ret < 0) {
snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
diff --git a/sound/usb/helper.c b/sound/usb/helper.c
index f280c19..9eed8f4 100644
--- a/sound/usb/helper.c
+++ b/sound/usb/helper.c
@@ -81,7 +81,7 @@
*/
int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
__u8 requesttype, __u16 value, __u16 index, void *data,
- __u16 size, int timeout)
+ __u16 size)
{
int err;
void *buf = NULL;
@@ -92,7 +92,7 @@
return -ENOMEM;
}
err = usb_control_msg(dev, pipe, request, requesttype,
- value, index, buf, size, timeout);
+ value, index, buf, size, 1000);
if (size > 0) {
memcpy(data, buf, size);
kfree(buf);
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index 09bd943..805c300 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -8,7 +8,7 @@
int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
- void *data, __u16 size, int timeout);
+ void *data, __u16 size);
unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip,
struct usb_host_interface *alts);
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index f928910..e21f026 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -816,6 +816,22 @@
.output = snd_usbmidi_raw_output,
};
+/*
+ * FTDI protocol: raw MIDI bytes, but input packets have two modem status bytes.
+ */
+
+static void snd_usbmidi_ftdi_input(struct snd_usb_midi_in_endpoint* ep,
+ uint8_t* buffer, int buffer_length)
+{
+ if (buffer_length > 2)
+ snd_usbmidi_input_data(ep, 0, buffer + 2, buffer_length - 2);
+}
+
+static struct usb_protocol_ops snd_usbmidi_ftdi_ops = {
+ .input = snd_usbmidi_ftdi_input,
+ .output = snd_usbmidi_raw_output,
+};
+
static void snd_usbmidi_us122l_input(struct snd_usb_midi_in_endpoint *ep,
uint8_t *buffer, int buffer_length)
{
@@ -2163,6 +2179,17 @@
/* endpoint 1 is input-only */
endpoints[1].out_cables = 0;
break;
+ case QUIRK_MIDI_FTDI:
+ umidi->usb_protocol_ops = &snd_usbmidi_ftdi_ops;
+
+ /* set baud rate to 31250 (48 MHz / 16 / 96) */
+ err = usb_control_msg(umidi->dev, usb_sndctrlpipe(umidi->dev, 0),
+ 3, 0x40, 0x60, 0, NULL, 0, 1000);
+ if (err < 0)
+ break;
+
+ err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+ break;
default:
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
err = -ENXIO;
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index cdd19d7..60f65ac 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -296,7 +296,7 @@
if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len, 100) >= val_len) {
+ buf, val_len) >= val_len) {
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
snd_usb_autosuspend(cval->mixer->chip);
return 0;
@@ -333,7 +333,7 @@
ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, size, 1000);
+ buf, size);
snd_usb_autosuspend(chip);
if (ret < 0) {
@@ -445,7 +445,7 @@
usb_sndctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len, 100) >= 0) {
+ buf, val_len) >= 0) {
snd_usb_autosuspend(chip);
return 0;
}
@@ -881,8 +881,17 @@
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
} else {
- if (! cval->initialized)
- get_min_max(cval, 0);
+ if (!cval->initialized) {
+ get_min_max(cval, 0);
+ if (cval->initialized && cval->dBmin >= cval->dBmax) {
+ kcontrol->vd[0].access &=
+ ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK);
+ snd_ctl_notify(cval->mixer->chip->card,
+ SNDRV_CTL_EVENT_MASK_INFO,
+ &kcontrol->id);
+ }
+ }
uinfo->value.integer.min = 0;
uinfo->value.integer.max =
(cval->max - cval->min + cval->res - 1) / cval->res;
@@ -1250,7 +1259,7 @@
build_feature_ctl(state, _ftr, 0, i, &iterm, unitid, 0);
}
} else { /* UAC_VERSION_2 */
- for (i = 0; i < 30/2; i++) {
+ for (i = 0; i < ARRAY_SIZE(audio_feature_info); i++) {
unsigned int ch_bits = 0;
unsigned int ch_read_only = 0;
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 3d0f487..ab125ee 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -190,18 +190,18 @@
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- !value, 0, NULL, 0, 100);
+ !value, 0, NULL, 0);
/* USB X-Fi S51 Pro */
if (mixer->chip->usb_id == USB_ID(0x041e, 0x30df))
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- !value, 0, NULL, 0, 100);
+ !value, 0, NULL, 0);
else
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- value, index + 2, NULL, 0, 100);
+ value, index + 2, NULL, 0);
if (err < 0)
return err;
mixer->audigy2nx_leds[index] = value;
@@ -299,7 +299,7 @@
usb_rcvctrlpipe(mixer->chip->dev, 0),
UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0,
- jacks[i].unitid << 8, buf, 3, 100);
+ jacks[i].unitid << 8, buf, 3);
if (err == 3 && (buf[0] == 3 || buf[0] == 6))
snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
else
@@ -332,7 +332,7 @@
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- 50, 0, &new_status, 1, 100);
+ 50, 0, &new_status, 1);
if (err < 0)
return err;
mixer->xonar_u1_status = new_status;
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index b8dcbf4..0220b0f 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -28,12 +28,36 @@
#include "card.h"
#include "quirks.h"
#include "debug.h"
-#include "urb.h"
+#include "endpoint.h"
#include "helper.h"
#include "pcm.h"
#include "clock.h"
#include "power.h"
+/* return the estimated delay based on USB frame counters */
+snd_pcm_uframes_t snd_usb_pcm_delay(struct snd_usb_substream *subs,
+ unsigned int rate)
+{
+ int current_frame_number;
+ int frame_diff;
+ int est_delay;
+
+ current_frame_number = usb_get_current_frame_number(subs->dev);
+ /*
+ * HCD implementations use different widths, use lower 8 bits.
+ * The delay will be managed up to 256ms, which is more than
+ * enough
+ */
+ frame_diff = (current_frame_number - subs->last_frame_number) & 0xff;
+
+ /* Approximation based on number of samples per USB frame (ms),
+ some truncation for 44.1 but the estimate is good enough */
+ est_delay = subs->last_delay - (frame_diff * rate / 1000);
+ if (est_delay < 0)
+ est_delay = 0;
+ return est_delay;
+}
+
/*
* return the current pcm pointer. just based on the hwptr_done value.
*/
@@ -45,6 +69,8 @@
subs = (struct snd_usb_substream *)substream->runtime->private_data;
spin_lock(&subs->lock);
hwptr_done = subs->hwptr_done;
+ substream->runtime->delay = snd_usb_pcm_delay(subs,
+ substream->runtime->rate);
spin_unlock(&subs->lock);
return hwptr_done / (substream->runtime->frame_bits >> 3);
}
@@ -126,7 +152,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
UAC_EP_CS_ATTR_PITCH_CONTROL << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH\n",
dev->devnum, iface, ep);
return err;
@@ -150,7 +176,7 @@
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
UAC2_EP_CS_PITCH << 8, 0,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH (v2)\n",
dev->devnum, iface, fmt->altsetting);
return err;
@@ -417,6 +443,8 @@
subs->hwptr_done = 0;
subs->transfer_done = 0;
subs->phase = 0;
+ subs->last_delay = 0;
+ subs->last_frame_number = 0;
runtime->delay = 0;
return snd_usb_substream_prepare(subs, runtime);
diff --git a/sound/usb/pcm.h b/sound/usb/pcm.h
index ed3e283..df7a003 100644
--- a/sound/usb/pcm.h
+++ b/sound/usb/pcm.h
@@ -1,6 +1,9 @@
#ifndef __USBAUDIO_PCM_H
#define __USBAUDIO_PCM_H
+snd_pcm_uframes_t snd_usb_pcm_delay(struct snd_usb_substream *subs,
+ unsigned int rate);
+
void snd_usb_set_pcm_ops(struct snd_pcm *pcm, int stream);
int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index a42e3ef..b61945f 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -39,6 +39,17 @@
.idProduct = prod, \
.bInterfaceClass = USB_CLASS_VENDOR_SPEC
+/* FTDI devices */
+{
+ USB_DEVICE(0x0403, 0xb8d8),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "STARR LABS", */
+ /* .product_name = "Starr Labs MIDI USB device", */
+ .ifnum = 0,
+ .type = QUIRK_MIDI_FTDI
+ }
+},
+
/* Creative/Toshiba Multimedia Center SB-0500 */
{
USB_DEVICE(0x041e, 0x3048),
@@ -1678,6 +1689,20 @@
}
},
{
+ /* Added support for Roland UM-ONE which differs from UM-1 */
+ USB_DEVICE(0x0582, 0x012a),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "ROLAND", */
+ /* .product_name = "UM-ONE", */
+ .ifnum = 0,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0003
+ }
+ }
+},
+{
USB_DEVICE(0x0582, 0x011e),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
/* .vendor_name = "BOSS", */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 81e07d8..2e5bc73 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -34,6 +34,7 @@
#include "endpoint.h"
#include "pcm.h"
#include "clock.h"
+#include "stream.h"
/*
* handle the quirks for the contained interfaces
@@ -106,7 +107,7 @@
alts = &iface->altsetting[0];
altsd = get_iface_desc(alts);
- err = snd_usb_parse_audio_endpoints(chip, altsd->bInterfaceNumber);
+ err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
if (err < 0) {
snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
altsd->bInterfaceNumber, err);
@@ -147,7 +148,7 @@
stream = (fp->endpoint & USB_DIR_IN)
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = snd_usb_add_audio_endpoint(chip, stream, fp);
+ err = snd_usb_add_audio_stream(chip, stream, fp);
if (err < 0) {
kfree(fp);
kfree(rate_table);
@@ -254,7 +255,7 @@
stream = (fp->endpoint & USB_DIR_IN)
? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = snd_usb_add_audio_endpoint(chip, stream, fp);
+ err = snd_usb_add_audio_stream(chip, stream, fp);
if (err < 0) {
kfree(fp);
return err;
@@ -306,6 +307,7 @@
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
+ [QUIRK_MIDI_FTDI] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
@@ -338,7 +340,7 @@
snd_printdd("sending Extigy boot sequence...\n");
/* Send message to force it to reconnect with full interface. */
err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
- 0x10, 0x43, 0x0001, 0x000a, NULL, 0, 1000);
+ 0x10, 0x43, 0x0001, 0x000a, NULL, 0);
if (err < 0) snd_printdd("error sending boot message: %d\n", err);
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
&dev->descriptor, sizeof(dev->descriptor));
@@ -359,11 +361,11 @@
snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- 0, 0, &buf, 1, 1000);
+ 0, 0, &buf, 1);
if (buf == 0) {
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- 1, 2000, NULL, 0, 1000);
+ 1, 2000, NULL, 0);
return -ENODEV;
}
return 0;
@@ -406,7 +408,7 @@
buf[3] = reg;
return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
- 0, 0, &buf, 4, 1000);
+ 0, 0, &buf, 4);
}
static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
new file mode 100644
index 0000000..5ff8010
--- /dev/null
+++ b/sound/usb/stream.c
@@ -0,0 +1,452 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "usbaudio.h"
+#include "card.h"
+#include "proc.h"
+#include "quirks.h"
+#include "endpoint.h"
+#include "pcm.h"
+#include "helper.h"
+#include "format.h"
+#include "clock.h"
+#include "stream.h"
+
+/*
+ * free a substream
+ */
+static void free_substream(struct snd_usb_substream *subs)
+{
+ struct list_head *p, *n;
+
+ if (!subs->num_formats)
+ return; /* not initialized */
+ list_for_each_safe(p, n, &subs->fmt_list) {
+ struct audioformat *fp = list_entry(p, struct audioformat, list);
+ kfree(fp->rate_table);
+ kfree(fp);
+ }
+ kfree(subs->rate_list.list);
+}
+
+
+/*
+ * free a usb stream instance
+ */
+static void snd_usb_audio_stream_free(struct snd_usb_stream *stream)
+{
+ free_substream(&stream->substream[0]);
+ free_substream(&stream->substream[1]);
+ list_del(&stream->list);
+ kfree(stream);
+}
+
+static void snd_usb_audio_pcm_free(struct snd_pcm *pcm)
+{
+ struct snd_usb_stream *stream = pcm->private_data;
+ if (stream) {
+ stream->pcm = NULL;
+ snd_usb_audio_stream_free(stream);
+ }
+}
+
+
+/*
+ * add this endpoint to the chip instance.
+ * if a stream with the same endpoint already exists, append to it.
+ * if not, create a new pcm stream.
+ */
+int snd_usb_add_audio_stream(struct snd_usb_audio *chip,
+ int stream,
+ struct audioformat *fp)
+{
+ struct list_head *p;
+ struct snd_usb_stream *as;
+ struct snd_usb_substream *subs;
+ struct snd_pcm *pcm;
+ int err;
+
+ list_for_each(p, &chip->pcm_list) {
+ as = list_entry(p, struct snd_usb_stream, list);
+ if (as->fmt_type != fp->fmt_type)
+ continue;
+ subs = &as->substream[stream];
+ if (!subs->endpoint)
+ continue;
+ if (subs->endpoint == fp->endpoint) {
+ list_add_tail(&fp->list, &subs->fmt_list);
+ subs->num_formats++;
+ subs->formats |= fp->formats;
+ return 0;
+ }
+ }
+ /* look for an empty stream */
+ list_for_each(p, &chip->pcm_list) {
+ as = list_entry(p, struct snd_usb_stream, list);
+ if (as->fmt_type != fp->fmt_type)
+ continue;
+ subs = &as->substream[stream];
+ if (subs->endpoint)
+ continue;
+ err = snd_pcm_new_stream(as->pcm, stream, 1);
+ if (err < 0)
+ return err;
+ snd_usb_init_substream(as, stream, fp);
+ return 0;
+ }
+
+ /* create a new pcm */
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
+ if (!as)
+ return -ENOMEM;
+ as->pcm_index = chip->pcm_devs;
+ as->chip = chip;
+ as->fmt_type = fp->fmt_type;
+ err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs,
+ stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0,
+ stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1,
+ &pcm);
+ if (err < 0) {
+ kfree(as);
+ return err;
+ }
+ as->pcm = pcm;
+ pcm->private_data = as;
+ pcm->private_free = snd_usb_audio_pcm_free;
+ pcm->info_flags = 0;
+ if (chip->pcm_devs > 0)
+ sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs);
+ else
+ strcpy(pcm->name, "USB Audio");
+
+ snd_usb_init_substream(as, stream, fp);
+
+ list_add(&as->list, &chip->pcm_list);
+ chip->pcm_devs++;
+
+ snd_usb_proc_pcm_format_add(as);
+
+ return 0;
+}
+
+static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
+ struct usb_host_interface *alts,
+ int protocol, int iface_no)
+{
+ /* parsed with a v1 header here. that's ok as we only look at the
+ * header first which is the same for both versions */
+ struct uac_iso_endpoint_descriptor *csep;
+ struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+ int attributes = 0;
+
+ csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
+
+ /* Creamware Noah has this descriptor after the 2nd endpoint */
+ if (!csep && altsd->bNumEndpoints >= 2)
+ csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
+
+ if (!csep || csep->bLength < 7 ||
+ csep->bDescriptorSubtype != UAC_EP_GENERAL) {
+ snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
+ " class specific endpoint descriptor\n",
+ chip->dev->devnum, iface_no,
+ altsd->bAlternateSetting);
+ return 0;
+ }
+
+ if (protocol == UAC_VERSION_1) {
+ attributes = csep->bmAttributes;
+ } else {
+ struct uac2_iso_endpoint_descriptor *csep2 =
+ (struct uac2_iso_endpoint_descriptor *) csep;
+
+ attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
+
+ /* emulate the endpoint attributes of a v1 device */
+ if (csep2->bmControls & UAC2_CONTROL_PITCH)
+ attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
+ }
+
+ return attributes;
+}
+
+static struct uac2_input_terminal_descriptor *
+ snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_input_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_INPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
+static struct uac2_output_terminal_descriptor *
+ snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_output_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_OUTPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
+int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
+{
+ struct usb_device *dev;
+ struct usb_interface *iface;
+ struct usb_host_interface *alts;
+ struct usb_interface_descriptor *altsd;
+ int i, altno, err, stream;
+ int format = 0, num_channels = 0;
+ struct audioformat *fp = NULL;
+ int num, protocol, clock = 0;
+ struct uac_format_type_i_continuous_descriptor *fmt;
+
+ dev = chip->dev;
+
+ /* parse the interface's altsettings */
+ iface = usb_ifnum_to_if(dev, iface_no);
+
+ num = iface->num_altsetting;
+
+ /*
+ * Dallas DS4201 workaround: It presents 5 altsettings, but the last
+ * one misses syncpipe, and does not produce any sound.
+ */
+ if (chip->usb_id == USB_ID(0x04fa, 0x4201))
+ num = 4;
+
+ for (i = 0; i < num; i++) {
+ alts = &iface->altsetting[i];
+ altsd = get_iface_desc(alts);
+ protocol = altsd->bInterfaceProtocol;
+ /* skip invalid one */
+ if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
+ altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
+ (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
+ altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
+ altsd->bNumEndpoints < 1 ||
+ le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
+ continue;
+ /* must be isochronous */
+ if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
+ USB_ENDPOINT_XFER_ISOC)
+ continue;
+ /* check direction */
+ stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ?
+ SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+ altno = altsd->bAlternateSetting;
+
+ if (snd_usb_apply_interface_quirk(chip, iface_no, altno))
+ continue;
+
+ /* get audio formats */
+ switch (protocol) {
+ default:
+ snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
+ dev->devnum, iface_no, altno, protocol);
+ protocol = UAC_VERSION_1;
+ /* fall through */
+
+ case UAC_VERSION_1: {
+ struct uac1_as_header_descriptor *as =
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+
+ if (!as) {
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ if (as->bLength < sizeof(*as)) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ format = le16_to_cpu(as->wFormatTag); /* remember the format value */
+ break;
+ }
+
+ case UAC_VERSION_2: {
+ struct uac2_input_terminal_descriptor *input_term;
+ struct uac2_output_terminal_descriptor *output_term;
+ struct uac2_as_header_descriptor *as =
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+
+ if (!as) {
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ if (as->bLength < sizeof(*as)) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ num_channels = as->bNrChannels;
+ format = le32_to_cpu(as->bmFormats);
+
+ /* lookup the terminal associated to this interface
+ * to extract the clock */
+ input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (input_term) {
+ clock = input_term->bCSourceID;
+ break;
+ }
+
+ output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (output_term) {
+ clock = output_term->bCSourceID;
+ break;
+ }
+
+ snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
+ dev->devnum, iface_no, altno, as->bTerminalLink);
+ continue;
+ }
+ }
+
+ /* get format type */
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
+ if (!fmt) {
+ snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+ if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
+ ((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ /*
+ * Blue Microphones workaround: The last altsetting is identical
+ * with the previous one, except for a larger packet size, but
+ * is actually a mislabeled two-channel setting; ignore it.
+ */
+ if (fmt->bNrChannels == 1 &&
+ fmt->bSubframeSize == 2 &&
+ altno == 2 && num == 3 &&
+ fp && fp->altsetting == 1 && fp->channels == 1 &&
+ fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
+ protocol == UAC_VERSION_1 &&
+ le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
+ fp->maxpacksize * 2)
+ continue;
+
+ fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+ if (! fp) {
+ snd_printk(KERN_ERR "cannot malloc\n");
+ return -ENOMEM;
+ }
+
+ fp->iface = iface_no;
+ fp->altsetting = altno;
+ fp->altset_idx = i;
+ fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
+ fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
+ fp->datainterval = snd_usb_parse_datainterval(chip, alts);
+ fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
+ /* num_channels is only set for v2 interfaces */
+ fp->channels = num_channels;
+ if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
+ fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
+ * (fp->maxpacksize & 0x7ff);
+ fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
+ fp->clock = clock;
+
+ /* some quirks for attributes here */
+
+ switch (chip->usb_id) {
+ case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
+ /* Optoplay sets the sample rate attribute although
+ * it seems not supporting it in fact.
+ */
+ fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
+ break;
+ case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
+ case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
+ /* doesn't set the sample rate attribute, but supports it */
+ fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
+ break;
+ case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
+ case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
+ case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
+ case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
+ an older model 77d:223) */
+ /*
+ * plantronics headset and Griffin iMic have set adaptive-in
+ * although it's really not...
+ */
+ fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
+ else
+ fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
+ break;
+ }
+
+ /* ok, let's parse further... */
+ if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
+ kfree(fp->rate_table);
+ kfree(fp);
+ fp = NULL;
+ continue;
+ }
+
+ snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
+ err = snd_usb_add_audio_stream(chip, stream, fp);
+ if (err < 0) {
+ kfree(fp->rate_table);
+ kfree(fp);
+ return err;
+ }
+ /* try to set the interface... */
+ usb_set_interface(chip->dev, iface_no, altno);
+ snd_usb_init_pitch(chip, iface_no, alts, fp);
+ snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
+ }
+ return 0;
+}
+
diff --git a/sound/usb/stream.h b/sound/usb/stream.h
new file mode 100644
index 0000000..c97f679
--- /dev/null
+++ b/sound/usb/stream.h
@@ -0,0 +1,12 @@
+#ifndef __USBAUDIO_STREAM_H
+#define __USBAUDIO_STREAM_H
+
+int snd_usb_parse_audio_interface(struct snd_usb_audio *chip,
+ int iface_no);
+
+int snd_usb_add_audio_stream(struct snd_usb_audio *chip,
+ int stream,
+ struct audioformat *fp);
+
+#endif /* __USBAUDIO_STREAM_H */
+
diff --git a/sound/usb/urb.c b/sound/usb/urb.c
deleted file mode 100644
index e184349..0000000
--- a/sound/usb/urb.c
+++ /dev/null
@@ -1,941 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/usb.h>
-#include <linux/usb/audio.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-
-#include "usbaudio.h"
-#include "helper.h"
-#include "card.h"
-#include "urb.h"
-#include "pcm.h"
-
-/*
- * convert a sampling rate into our full speed format (fs/1000 in Q16.16)
- * this will overflow at approx 524 kHz
- */
-static inline unsigned get_usb_full_speed_rate(unsigned int rate)
-{
- return ((rate << 13) + 62) / 125;
-}
-
-/*
- * convert a sampling rate into USB high speed format (fs/8000 in Q16.16)
- * this will overflow at approx 4 MHz
- */
-static inline unsigned get_usb_high_speed_rate(unsigned int rate)
-{
- return ((rate << 10) + 62) / 125;
-}
-
-/*
- * unlink active urbs.
- */
-static int deactivate_urbs(struct snd_usb_substream *subs, int force, int can_sleep)
-{
- struct snd_usb_audio *chip = subs->stream->chip;
- unsigned int i;
- int async;
-
- subs->running = 0;
-
- if (!force && subs->stream->chip->shutdown) /* to be sure... */
- return -EBADFD;
-
- async = !can_sleep && chip->async_unlink;
-
- if (!async && in_interrupt())
- return 0;
-
- for (i = 0; i < subs->nurbs; i++) {
- if (test_bit(i, &subs->active_mask)) {
- if (!test_and_set_bit(i, &subs->unlink_mask)) {
- struct urb *u = subs->dataurb[i].urb;
- if (async)
- usb_unlink_urb(u);
- else
- usb_kill_urb(u);
- }
- }
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- if (test_bit(i+16, &subs->active_mask)) {
- if (!test_and_set_bit(i+16, &subs->unlink_mask)) {
- struct urb *u = subs->syncurb[i].urb;
- if (async)
- usb_unlink_urb(u);
- else
- usb_kill_urb(u);
- }
- }
- }
- }
- return 0;
-}
-
-
-/*
- * release a urb data
- */
-static void release_urb_ctx(struct snd_urb_ctx *u)
-{
- if (u->urb) {
- if (u->buffer_size)
- usb_free_coherent(u->subs->dev, u->buffer_size,
- u->urb->transfer_buffer,
- u->urb->transfer_dma);
- usb_free_urb(u->urb);
- u->urb = NULL;
- }
-}
-
-/*
- * wait until all urbs are processed.
- */
-static int wait_clear_urbs(struct snd_usb_substream *subs)
-{
- unsigned long end_time = jiffies + msecs_to_jiffies(1000);
- unsigned int i;
- int alive;
-
- do {
- alive = 0;
- for (i = 0; i < subs->nurbs; i++) {
- if (test_bit(i, &subs->active_mask))
- alive++;
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- if (test_bit(i + 16, &subs->active_mask))
- alive++;
- }
- }
- if (! alive)
- break;
- schedule_timeout_uninterruptible(1);
- } while (time_before(jiffies, end_time));
- if (alive)
- snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive);
- return 0;
-}
-
-/*
- * release a substream
- */
-void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force)
-{
- int i;
-
- /* stop urbs (to be sure) */
- deactivate_urbs(subs, force, 1);
- wait_clear_urbs(subs);
-
- for (i = 0; i < MAX_URBS; i++)
- release_urb_ctx(&subs->dataurb[i]);
- for (i = 0; i < SYNC_URBS; i++)
- release_urb_ctx(&subs->syncurb[i]);
- usb_free_coherent(subs->dev, SYNC_URBS * 4,
- subs->syncbuf, subs->sync_dma);
- subs->syncbuf = NULL;
- subs->nurbs = 0;
-}
-
-/*
- * complete callback from data urb
- */
-static void snd_complete_urb(struct urb *urb)
-{
- struct snd_urb_ctx *ctx = urb->context;
- struct snd_usb_substream *subs = ctx->subs;
- struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
- int err = 0;
-
- if ((subs->running && subs->ops.retire(subs, substream->runtime, urb)) ||
- !subs->running || /* can be stopped during retire callback */
- (err = subs->ops.prepare(subs, substream->runtime, urb)) < 0 ||
- (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- clear_bit(ctx->index, &subs->active_mask);
- if (err < 0) {
- snd_printd(KERN_ERR "cannot submit urb (err = %d)\n", err);
- snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
- }
- }
-}
-
-
-/*
- * complete callback from sync urb
- */
-static void snd_complete_sync_urb(struct urb *urb)
-{
- struct snd_urb_ctx *ctx = urb->context;
- struct snd_usb_substream *subs = ctx->subs;
- struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
- int err = 0;
-
- if ((subs->running && subs->ops.retire_sync(subs, substream->runtime, urb)) ||
- !subs->running || /* can be stopped during retire callback */
- (err = subs->ops.prepare_sync(subs, substream->runtime, urb)) < 0 ||
- (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- clear_bit(ctx->index + 16, &subs->active_mask);
- if (err < 0) {
- snd_printd(KERN_ERR "cannot submit sync urb (err = %d)\n", err);
- snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
- }
- }
-}
-
-
-/*
- * initialize a substream for plaback/capture
- */
-int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
- unsigned int period_bytes,
- unsigned int rate,
- unsigned int frame_bits)
-{
- unsigned int maxsize, i;
- int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK;
- unsigned int urb_packs, total_packs, packs_per_ms;
- struct snd_usb_audio *chip = subs->stream->chip;
-
- /* calculate the frequency in 16.16 format */
- if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
- subs->freqn = get_usb_full_speed_rate(rate);
- else
- subs->freqn = get_usb_high_speed_rate(rate);
- subs->freqm = subs->freqn;
- subs->freqshift = INT_MIN;
- /* calculate max. frequency */
- if (subs->maxpacksize) {
- /* whatever fits into a max. size packet */
- maxsize = subs->maxpacksize;
- subs->freqmax = (maxsize / (frame_bits >> 3))
- << (16 - subs->datainterval);
- } else {
- /* no max. packet size: just take 25% higher than nominal */
- subs->freqmax = subs->freqn + (subs->freqn >> 2);
- maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3))
- >> (16 - subs->datainterval);
- }
- subs->phase = 0;
-
- if (subs->fill_max)
- subs->curpacksize = subs->maxpacksize;
- else
- subs->curpacksize = maxsize;
-
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
- packs_per_ms = 8 >> subs->datainterval;
- else
- packs_per_ms = 1;
-
- if (is_playback) {
- urb_packs = max(chip->nrpacks, 1);
- urb_packs = min(urb_packs, (unsigned int)MAX_PACKS);
- } else
- urb_packs = 1;
- urb_packs *= packs_per_ms;
- if (subs->syncpipe)
- urb_packs = min(urb_packs, 1U << subs->syncinterval);
-
- /* decide how many packets to be used */
- if (is_playback) {
- unsigned int minsize, maxpacks;
- /* determine how small a packet can be */
- minsize = (subs->freqn >> (16 - subs->datainterval))
- * (frame_bits >> 3);
- /* with sync from device, assume it can be 12% lower */
- if (subs->syncpipe)
- minsize -= minsize >> 3;
- minsize = max(minsize, 1u);
- total_packs = (period_bytes + minsize - 1) / minsize;
- /* we need at least two URBs for queueing */
- if (total_packs < 2) {
- total_packs = 2;
- } else {
- /* and we don't want too long a queue either */
- maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2);
- total_packs = min(total_packs, maxpacks);
- }
- } else {
- while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
- urb_packs >>= 1;
- total_packs = MAX_URBS * urb_packs;
- }
- subs->nurbs = (total_packs + urb_packs - 1) / urb_packs;
- if (subs->nurbs > MAX_URBS) {
- /* too much... */
- subs->nurbs = MAX_URBS;
- total_packs = MAX_URBS * urb_packs;
- } else if (subs->nurbs < 2) {
- /* too little - we need at least two packets
- * to ensure contiguous playback/capture
- */
- subs->nurbs = 2;
- }
-
- /* allocate and initialize data urbs */
- for (i = 0; i < subs->nurbs; i++) {
- struct snd_urb_ctx *u = &subs->dataurb[i];
- u->index = i;
- u->subs = subs;
- u->packets = (i + 1) * total_packs / subs->nurbs
- - i * total_packs / subs->nurbs;
- u->buffer_size = maxsize * u->packets;
- if (subs->fmt_type == UAC_FORMAT_TYPE_II)
- u->packets++; /* for transfer delimiter */
- u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
- if (!u->urb)
- goto out_of_memory;
- u->urb->transfer_buffer =
- usb_alloc_coherent(subs->dev, u->buffer_size,
- GFP_KERNEL, &u->urb->transfer_dma);
- if (!u->urb->transfer_buffer)
- goto out_of_memory;
- u->urb->pipe = subs->datapipe;
- u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
- u->urb->interval = 1 << subs->datainterval;
- u->urb->context = u;
- u->urb->complete = snd_complete_urb;
- }
-
- if (subs->syncpipe) {
- /* allocate and initialize sync urbs */
- subs->syncbuf = usb_alloc_coherent(subs->dev, SYNC_URBS * 4,
- GFP_KERNEL, &subs->sync_dma);
- if (!subs->syncbuf)
- goto out_of_memory;
- for (i = 0; i < SYNC_URBS; i++) {
- struct snd_urb_ctx *u = &subs->syncurb[i];
- u->index = i;
- u->subs = subs;
- u->packets = 1;
- u->urb = usb_alloc_urb(1, GFP_KERNEL);
- if (!u->urb)
- goto out_of_memory;
- u->urb->transfer_buffer = subs->syncbuf + i * 4;
- u->urb->transfer_dma = subs->sync_dma + i * 4;
- u->urb->transfer_buffer_length = 4;
- u->urb->pipe = subs->syncpipe;
- u->urb->transfer_flags = URB_ISO_ASAP |
- URB_NO_TRANSFER_DMA_MAP;
- u->urb->number_of_packets = 1;
- u->urb->interval = 1 << subs->syncinterval;
- u->urb->context = u;
- u->urb->complete = snd_complete_sync_urb;
- }
- }
- return 0;
-
-out_of_memory:
- snd_usb_release_substream_urbs(subs, 0);
- return -ENOMEM;
-}
-
-/*
- * prepare urb for full speed capture sync pipe
- *
- * fill the length and offset of each urb descriptor.
- * the fixed 10.14 frequency is passed through the pipe.
- */
-static int prepare_capture_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned char *cp = urb->transfer_buffer;
- struct snd_urb_ctx *ctx = urb->context;
-
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->iso_frame_desc[0].length = 3;
- urb->iso_frame_desc[0].offset = 0;
- cp[0] = subs->freqn >> 2;
- cp[1] = subs->freqn >> 10;
- cp[2] = subs->freqn >> 18;
- return 0;
-}
-
-/*
- * prepare urb for high speed capture sync pipe
- *
- * fill the length and offset of each urb descriptor.
- * the fixed 12.13 frequency is passed as 16.16 through the pipe.
- */
-static int prepare_capture_sync_urb_hs(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned char *cp = urb->transfer_buffer;
- struct snd_urb_ctx *ctx = urb->context;
-
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->iso_frame_desc[0].length = 4;
- urb->iso_frame_desc[0].offset = 0;
- cp[0] = subs->freqn;
- cp[1] = subs->freqn >> 8;
- cp[2] = subs->freqn >> 16;
- cp[3] = subs->freqn >> 24;
- return 0;
-}
-
-/*
- * process after capture sync complete
- * - nothing to do
- */
-static int retire_capture_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- return 0;
-}
-
-/*
- * prepare urb for capture data pipe
- *
- * fill the offset and length of each descriptor.
- *
- * we use a temporary buffer to write the captured data.
- * since the length of written data is determined by host, we cannot
- * write onto the pcm buffer directly... the data is thus copied
- * later at complete callback to the global buffer.
- */
-static int prepare_capture_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- int i, offs;
- struct snd_urb_ctx *ctx = urb->context;
-
- offs = 0;
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- for (i = 0; i < ctx->packets; i++) {
- urb->iso_frame_desc[i].offset = offs;
- urb->iso_frame_desc[i].length = subs->curpacksize;
- offs += subs->curpacksize;
- }
- urb->transfer_buffer_length = offs;
- urb->number_of_packets = ctx->packets;
- return 0;
-}
-
-/*
- * process after capture complete
- *
- * copy the data from each desctiptor to the pcm buffer, and
- * update the current position.
- */
-static int retire_capture_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned long flags;
- unsigned char *cp;
- int i;
- unsigned int stride, frames, bytes, oldptr;
- int period_elapsed = 0;
-
- stride = runtime->frame_bits >> 3;
-
- for (i = 0; i < urb->number_of_packets; i++) {
- cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
- if (urb->iso_frame_desc[i].status) {
- snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
- // continue;
- }
- bytes = urb->iso_frame_desc[i].actual_length;
- frames = bytes / stride;
- if (!subs->txfr_quirk)
- bytes = frames * stride;
- if (bytes % (runtime->sample_bits >> 3) != 0) {
-#ifdef CONFIG_SND_DEBUG_VERBOSE
- int oldbytes = bytes;
-#endif
- bytes = frames * stride;
- snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
- oldbytes, bytes);
- }
- /* update the current pointer */
- spin_lock_irqsave(&subs->lock, flags);
- oldptr = subs->hwptr_done;
- subs->hwptr_done += bytes;
- if (subs->hwptr_done >= runtime->buffer_size * stride)
- subs->hwptr_done -= runtime->buffer_size * stride;
- frames = (bytes + (oldptr % stride)) / stride;
- subs->transfer_done += frames;
- if (subs->transfer_done >= runtime->period_size) {
- subs->transfer_done -= runtime->period_size;
- period_elapsed = 1;
- }
- spin_unlock_irqrestore(&subs->lock, flags);
- /* copy a data chunk */
- if (oldptr + bytes > runtime->buffer_size * stride) {
- unsigned int bytes1 =
- runtime->buffer_size * stride - oldptr;
- memcpy(runtime->dma_area + oldptr, cp, bytes1);
- memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1);
- } else {
- memcpy(runtime->dma_area + oldptr, cp, bytes);
- }
- }
- if (period_elapsed)
- snd_pcm_period_elapsed(subs->pcm_substream);
- return 0;
-}
-
-/*
- * Process after capture complete when paused. Nothing to do.
- */
-static int retire_paused_capture_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- return 0;
-}
-
-
-/*
- * prepare urb for playback sync pipe
- *
- * set up the offset and length to receive the current frequency.
- */
-static int prepare_playback_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- struct snd_urb_ctx *ctx = urb->context;
-
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->iso_frame_desc[0].length = min(4u, ctx->subs->syncmaxsize);
- urb->iso_frame_desc[0].offset = 0;
- return 0;
-}
-
-/*
- * process after playback sync complete
- *
- * Full speed devices report feedback values in 10.14 format as samples per
- * frame, high speed devices in 16.16 format as samples per microframe.
- * Because the Audio Class 1 spec was written before USB 2.0, many high speed
- * devices use a wrong interpretation, some others use an entirely different
- * format. Therefore, we cannot predict what format any particular device uses
- * and must detect it automatically.
- */
-static int retire_playback_sync_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned int f;
- int shift;
- unsigned long flags;
-
- if (urb->iso_frame_desc[0].status != 0 ||
- urb->iso_frame_desc[0].actual_length < 3)
- return 0;
-
- f = le32_to_cpup(urb->transfer_buffer);
- if (urb->iso_frame_desc[0].actual_length == 3)
- f &= 0x00ffffff;
- else
- f &= 0x0fffffff;
- if (f == 0)
- return 0;
-
- if (unlikely(subs->freqshift == INT_MIN)) {
- /*
- * The first time we see a feedback value, determine its format
- * by shifting it left or right until it matches the nominal
- * frequency value. This assumes that the feedback does not
- * differ from the nominal value more than +50% or -25%.
- */
- shift = 0;
- while (f < subs->freqn - subs->freqn / 4) {
- f <<= 1;
- shift++;
- }
- while (f > subs->freqn + subs->freqn / 2) {
- f >>= 1;
- shift--;
- }
- subs->freqshift = shift;
- }
- else if (subs->freqshift >= 0)
- f <<= subs->freqshift;
- else
- f >>= -subs->freqshift;
-
- if (likely(f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax)) {
- /*
- * If the frequency looks valid, set it.
- * This value is referred to in prepare_playback_urb().
- */
- spin_lock_irqsave(&subs->lock, flags);
- subs->freqm = f;
- spin_unlock_irqrestore(&subs->lock, flags);
- } else {
- /*
- * Out of range; maybe the shift value is wrong.
- * Reset it so that we autodetect again the next time.
- */
- subs->freqshift = INT_MIN;
- }
-
- return 0;
-}
-
-/* determine the number of frames in the next packet */
-static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs)
-{
- if (subs->fill_max)
- return subs->maxframesize;
- else {
- subs->phase = (subs->phase & 0xffff)
- + (subs->freqm << subs->datainterval);
- return min(subs->phase >> 16, subs->maxframesize);
- }
-}
-
-/*
- * Prepare urb for streaming before playback starts or when paused.
- *
- * We don't have any data, so we send silence.
- */
-static int prepare_nodata_playback_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned int i, offs, counts;
- struct snd_urb_ctx *ctx = urb->context;
- int stride = runtime->frame_bits >> 3;
-
- offs = 0;
- urb->dev = ctx->subs->dev;
- for (i = 0; i < ctx->packets; ++i) {
- counts = snd_usb_audio_next_packet_size(subs);
- urb->iso_frame_desc[i].offset = offs * stride;
- urb->iso_frame_desc[i].length = counts * stride;
- offs += counts;
- }
- urb->number_of_packets = ctx->packets;
- urb->transfer_buffer_length = offs * stride;
- memset(urb->transfer_buffer,
- runtime->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0,
- offs * stride);
- return 0;
-}
-
-/*
- * prepare urb for playback data pipe
- *
- * Since a URB can handle only a single linear buffer, we must use double
- * buffering when the data to be transferred overflows the buffer boundary.
- * To avoid inconsistencies when updating hwptr_done, we use double buffering
- * for all URBs.
- */
-static int prepare_playback_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- int i, stride;
- unsigned int counts, frames, bytes;
- unsigned long flags;
- int period_elapsed = 0;
- struct snd_urb_ctx *ctx = urb->context;
-
- stride = runtime->frame_bits >> 3;
-
- frames = 0;
- urb->dev = ctx->subs->dev; /* we need to set this at each time */
- urb->number_of_packets = 0;
- spin_lock_irqsave(&subs->lock, flags);
- for (i = 0; i < ctx->packets; i++) {
- counts = snd_usb_audio_next_packet_size(subs);
- /* set up descriptor */
- urb->iso_frame_desc[i].offset = frames * stride;
- urb->iso_frame_desc[i].length = counts * stride;
- frames += counts;
- urb->number_of_packets++;
- subs->transfer_done += counts;
- if (subs->transfer_done >= runtime->period_size) {
- subs->transfer_done -= runtime->period_size;
- period_elapsed = 1;
- if (subs->fmt_type == UAC_FORMAT_TYPE_II) {
- if (subs->transfer_done > 0) {
- /* FIXME: fill-max mode is not
- * supported yet */
- frames -= subs->transfer_done;
- counts -= subs->transfer_done;
- urb->iso_frame_desc[i].length =
- counts * stride;
- subs->transfer_done = 0;
- }
- i++;
- if (i < ctx->packets) {
- /* add a transfer delimiter */
- urb->iso_frame_desc[i].offset =
- frames * stride;
- urb->iso_frame_desc[i].length = 0;
- urb->number_of_packets++;
- }
- break;
- }
- }
- if (period_elapsed) /* finish at the period boundary */
- break;
- }
- bytes = frames * stride;
- if (subs->hwptr_done + bytes > runtime->buffer_size * stride) {
- /* err, the transferred area goes over buffer boundary. */
- unsigned int bytes1 =
- runtime->buffer_size * stride - subs->hwptr_done;
- memcpy(urb->transfer_buffer,
- runtime->dma_area + subs->hwptr_done, bytes1);
- memcpy(urb->transfer_buffer + bytes1,
- runtime->dma_area, bytes - bytes1);
- } else {
- memcpy(urb->transfer_buffer,
- runtime->dma_area + subs->hwptr_done, bytes);
- }
- subs->hwptr_done += bytes;
- if (subs->hwptr_done >= runtime->buffer_size * stride)
- subs->hwptr_done -= runtime->buffer_size * stride;
- runtime->delay += frames;
- spin_unlock_irqrestore(&subs->lock, flags);
- urb->transfer_buffer_length = bytes;
- if (period_elapsed)
- snd_pcm_period_elapsed(subs->pcm_substream);
- return 0;
-}
-
-/*
- * process after playback data complete
- * - decrease the delay count again
- */
-static int retire_playback_urb(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime,
- struct urb *urb)
-{
- unsigned long flags;
- int stride = runtime->frame_bits >> 3;
- int processed = urb->transfer_buffer_length / stride;
-
- spin_lock_irqsave(&subs->lock, flags);
- if (processed > runtime->delay)
- runtime->delay = 0;
- else
- runtime->delay -= processed;
- spin_unlock_irqrestore(&subs->lock, flags);
- return 0;
-}
-
-static const char *usb_error_string(int err)
-{
- switch (err) {
- case -ENODEV:
- return "no device";
- case -ENOENT:
- return "endpoint not enabled";
- case -EPIPE:
- return "endpoint stalled";
- case -ENOSPC:
- return "not enough bandwidth";
- case -ESHUTDOWN:
- return "device disabled";
- case -EHOSTUNREACH:
- return "device suspended";
- case -EINVAL:
- case -EAGAIN:
- case -EFBIG:
- case -EMSGSIZE:
- return "internal error";
- default:
- return "unknown error";
- }
-}
-
-/*
- * set up and start data/sync urbs
- */
-static int start_urbs(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime)
-{
- unsigned int i;
- int err;
-
- if (subs->stream->chip->shutdown)
- return -EBADFD;
-
- for (i = 0; i < subs->nurbs; i++) {
- if (snd_BUG_ON(!subs->dataurb[i].urb))
- return -EINVAL;
- if (subs->ops.prepare(subs, runtime, subs->dataurb[i].urb) < 0) {
- snd_printk(KERN_ERR "cannot prepare datapipe for urb %d\n", i);
- goto __error;
- }
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- if (snd_BUG_ON(!subs->syncurb[i].urb))
- return -EINVAL;
- if (subs->ops.prepare_sync(subs, runtime, subs->syncurb[i].urb) < 0) {
- snd_printk(KERN_ERR "cannot prepare syncpipe for urb %d\n", i);
- goto __error;
- }
- }
- }
-
- subs->active_mask = 0;
- subs->unlink_mask = 0;
- subs->running = 1;
- for (i = 0; i < subs->nurbs; i++) {
- err = usb_submit_urb(subs->dataurb[i].urb, GFP_ATOMIC);
- if (err < 0) {
- snd_printk(KERN_ERR "cannot submit datapipe "
- "for urb %d, error %d: %s\n",
- i, err, usb_error_string(err));
- goto __error;
- }
- set_bit(i, &subs->active_mask);
- }
- if (subs->syncpipe) {
- for (i = 0; i < SYNC_URBS; i++) {
- err = usb_submit_urb(subs->syncurb[i].urb, GFP_ATOMIC);
- if (err < 0) {
- snd_printk(KERN_ERR "cannot submit syncpipe "
- "for urb %d, error %d: %s\n",
- i, err, usb_error_string(err));
- goto __error;
- }
- set_bit(i + 16, &subs->active_mask);
- }
- }
- return 0;
-
- __error:
- // snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN);
- deactivate_urbs(subs, 0, 0);
- return -EPIPE;
-}
-
-
-/*
- */
-static struct snd_urb_ops audio_urb_ops[2] = {
- {
- .prepare = prepare_nodata_playback_urb,
- .retire = retire_playback_urb,
- .prepare_sync = prepare_playback_sync_urb,
- .retire_sync = retire_playback_sync_urb,
- },
- {
- .prepare = prepare_capture_urb,
- .retire = retire_capture_urb,
- .prepare_sync = prepare_capture_sync_urb,
- .retire_sync = retire_capture_sync_urb,
- },
-};
-
-/*
- * initialize the substream instance.
- */
-
-void snd_usb_init_substream(struct snd_usb_stream *as,
- int stream, struct audioformat *fp)
-{
- struct snd_usb_substream *subs = &as->substream[stream];
-
- INIT_LIST_HEAD(&subs->fmt_list);
- spin_lock_init(&subs->lock);
-
- subs->stream = as;
- subs->direction = stream;
- subs->dev = as->chip->dev;
- subs->txfr_quirk = as->chip->txfr_quirk;
- subs->ops = audio_urb_ops[stream];
- if (snd_usb_get_speed(subs->dev) >= USB_SPEED_HIGH)
- subs->ops.prepare_sync = prepare_capture_sync_urb_hs;
-
- snd_usb_set_pcm_ops(as->pcm, stream);
-
- list_add_tail(&fp->list, &subs->fmt_list);
- subs->formats |= fp->formats;
- subs->endpoint = fp->endpoint;
- subs->num_formats++;
- subs->fmt_type = fp->fmt_type;
-}
-
-int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_usb_substream *subs = substream->runtime->private_data;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- subs->ops.prepare = prepare_playback_urb;
- return 0;
- case SNDRV_PCM_TRIGGER_STOP:
- return deactivate_urbs(subs, 0, 0);
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- subs->ops.prepare = prepare_nodata_playback_urb;
- return 0;
- }
-
- return -EINVAL;
-}
-
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_usb_substream *subs = substream->runtime->private_data;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- subs->ops.retire = retire_capture_urb;
- return start_urbs(subs, substream->runtime);
- case SNDRV_PCM_TRIGGER_STOP:
- return deactivate_urbs(subs, 0, 0);
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- subs->ops.retire = retire_paused_capture_urb;
- return 0;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- subs->ops.retire = retire_capture_urb;
- return 0;
- }
-
- return -EINVAL;
-}
-
-int snd_usb_substream_prepare(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime)
-{
- /* clear urbs (to be sure) */
- deactivate_urbs(subs, 0, 1);
- wait_clear_urbs(subs);
-
- /* for playback, submit the URBs now; otherwise, the first hwptr_done
- * updates for all URBs would happen at the same time when starting */
- if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
- subs->ops.prepare = prepare_nodata_playback_urb;
- return start_urbs(subs, runtime);
- }
-
- return 0;
-}
-
diff --git a/sound/usb/urb.h b/sound/usb/urb.h
deleted file mode 100644
index 888da38..0000000
--- a/sound/usb/urb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __USBAUDIO_URB_H
-#define __USBAUDIO_URB_H
-
-void snd_usb_init_substream(struct snd_usb_stream *as,
- int stream,
- struct audioformat *fp);
-
-int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
- unsigned int period_bytes,
- unsigned int rate,
- unsigned int frame_bits);
-
-void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force);
-
-int snd_usb_substream_prepare(struct snd_usb_substream *subs,
- struct snd_pcm_runtime *runtime);
-
-int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substream, int cmd);
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd);
-
-#endif /* __USBAUDIO_URB_H */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 1e79986..3e2b035 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -80,6 +80,7 @@
QUIRK_MIDI_CME,
QUIRK_MIDI_AKAI,
QUIRK_MIDI_US122L,
+ QUIRK_MIDI_FTDI,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
QUIRK_AUDIO_EDIROL_UAXX,
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
index eaf3a50..3ad0925 100644
--- a/virt/kvm/assigned-dev.c
+++ b/virt/kvm/assigned-dev.c
@@ -58,8 +58,6 @@
static irqreturn_t kvm_assigned_dev_thread(int irq, void *dev_id)
{
struct kvm_assigned_dev_kernel *assigned_dev = dev_id;
- u32 vector;
- int index;
if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_INTX) {
spin_lock(&assigned_dev->intx_lock);
@@ -68,31 +66,35 @@
spin_unlock(&assigned_dev->intx_lock);
}
- if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
- index = find_index_from_host_irq(assigned_dev, irq);
- if (index >= 0) {
- vector = assigned_dev->
- guest_msix_entries[index].vector;
- kvm_set_irq(assigned_dev->kvm,
- assigned_dev->irq_source_id, vector, 1);
- }
- } else
- kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
- assigned_dev->guest_irq, 1);
+ kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
+ assigned_dev->guest_irq, 1);
return IRQ_HANDLED;
}
+#ifdef __KVM_HAVE_MSIX
+static irqreturn_t kvm_assigned_dev_thread_msix(int irq, void *dev_id)
+{
+ struct kvm_assigned_dev_kernel *assigned_dev = dev_id;
+ int index = find_index_from_host_irq(assigned_dev, irq);
+ u32 vector;
+
+ if (index >= 0) {
+ vector = assigned_dev->guest_msix_entries[index].vector;
+ kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
+ vector, 1);
+ }
+
+ return IRQ_HANDLED;
+}
+#endif
+
/* Ack the irq line for an assigned device */
static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian)
{
- struct kvm_assigned_dev_kernel *dev;
-
- if (kian->gsi == -1)
- return;
-
- dev = container_of(kian, struct kvm_assigned_dev_kernel,
- ack_notifier);
+ struct kvm_assigned_dev_kernel *dev =
+ container_of(kian, struct kvm_assigned_dev_kernel,
+ ack_notifier);
kvm_set_irq(dev->kvm, dev->irq_source_id, dev->guest_irq, 0);
@@ -110,8 +112,9 @@
static void deassign_guest_irq(struct kvm *kvm,
struct kvm_assigned_dev_kernel *assigned_dev)
{
- kvm_unregister_irq_ack_notifier(kvm, &assigned_dev->ack_notifier);
- assigned_dev->ack_notifier.gsi = -1;
+ if (assigned_dev->ack_notifier.gsi != -1)
+ kvm_unregister_irq_ack_notifier(kvm,
+ &assigned_dev->ack_notifier);
kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
assigned_dev->guest_irq, 0);
@@ -143,7 +146,7 @@
for (i = 0; i < assigned_dev->entries_nr; i++)
free_irq(assigned_dev->host_msix_entries[i].vector,
- (void *)assigned_dev);
+ assigned_dev);
assigned_dev->entries_nr = 0;
kfree(assigned_dev->host_msix_entries);
@@ -153,7 +156,7 @@
/* Deal with MSI and INTx */
disable_irq(assigned_dev->host_irq);
- free_irq(assigned_dev->host_irq, (void *)assigned_dev);
+ free_irq(assigned_dev->host_irq, assigned_dev);
if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSI)
pci_disable_msi(assigned_dev->dev);
@@ -239,7 +242,7 @@
* are going to be long delays in accepting, acking, etc.
*/
if (request_threaded_irq(dev->host_irq, NULL, kvm_assigned_dev_thread,
- IRQF_ONESHOT, dev->irq_name, (void *)dev))
+ IRQF_ONESHOT, dev->irq_name, dev))
return -EIO;
return 0;
}
@@ -258,7 +261,7 @@
dev->host_irq = dev->dev->irq;
if (request_threaded_irq(dev->host_irq, NULL, kvm_assigned_dev_thread,
- 0, dev->irq_name, (void *)dev)) {
+ 0, dev->irq_name, dev)) {
pci_disable_msi(dev->dev);
return -EIO;
}
@@ -284,8 +287,8 @@
for (i = 0; i < dev->entries_nr; i++) {
r = request_threaded_irq(dev->host_msix_entries[i].vector,
- NULL, kvm_assigned_dev_thread,
- 0, dev->irq_name, (void *)dev);
+ NULL, kvm_assigned_dev_thread_msix,
+ 0, dev->irq_name, dev);
if (r)
goto err;
}
@@ -293,7 +296,7 @@
return 0;
err:
for (i -= 1; i >= 0; i--)
- free_irq(dev->host_msix_entries[i].vector, (void *)dev);
+ free_irq(dev->host_msix_entries[i].vector, dev);
pci_disable_msix(dev->dev);
return r;
}
@@ -406,7 +409,8 @@
if (!r) {
dev->irq_requested_type |= guest_irq_type;
- kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier);
+ if (dev->ack_notifier.gsi != -1)
+ kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier);
} else
kvm_free_irq_source_id(kvm, dev->irq_source_id);
diff --git a/virt/kvm/coalesced_mmio.c b/virt/kvm/coalesced_mmio.c
index fc84875..a6ec206 100644
--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -24,10 +24,19 @@
static int coalesced_mmio_in_range(struct kvm_coalesced_mmio_dev *dev,
gpa_t addr, int len)
{
- struct kvm_coalesced_mmio_zone *zone;
+ /* is it in a batchable area ?
+ * (addr,len) is fully included in
+ * (zone->addr, zone->size)
+ */
+
+ return (dev->zone.addr <= addr &&
+ addr + len <= dev->zone.addr + dev->zone.size);
+}
+
+static int coalesced_mmio_has_room(struct kvm_coalesced_mmio_dev *dev)
+{
struct kvm_coalesced_mmio_ring *ring;
unsigned avail;
- int i;
/* Are we able to batch it ? */
@@ -37,25 +46,12 @@
*/
ring = dev->kvm->coalesced_mmio_ring;
avail = (ring->first - ring->last - 1) % KVM_COALESCED_MMIO_MAX;
- if (avail < KVM_MAX_VCPUS) {
+ if (avail == 0) {
/* full */
return 0;
}
- /* is it in a batchable area ? */
-
- for (i = 0; i < dev->nb_zones; i++) {
- zone = &dev->zone[i];
-
- /* (addr,len) is fully included in
- * (zone->addr, zone->size)
- */
-
- if (zone->addr <= addr &&
- addr + len <= zone->addr + zone->size)
- return 1;
- }
- return 0;
+ return 1;
}
static int coalesced_mmio_write(struct kvm_io_device *this,
@@ -63,10 +59,16 @@
{
struct kvm_coalesced_mmio_dev *dev = to_mmio(this);
struct kvm_coalesced_mmio_ring *ring = dev->kvm->coalesced_mmio_ring;
+
if (!coalesced_mmio_in_range(dev, addr, len))
return -EOPNOTSUPP;
- spin_lock(&dev->lock);
+ spin_lock(&dev->kvm->ring_lock);
+
+ if (!coalesced_mmio_has_room(dev)) {
+ spin_unlock(&dev->kvm->ring_lock);
+ return -EOPNOTSUPP;
+ }
/* copy data in first free entry of the ring */
@@ -75,7 +77,7 @@
memcpy(ring->coalesced_mmio[ring->last].data, val, len);
smp_wmb();
ring->last = (ring->last + 1) % KVM_COALESCED_MMIO_MAX;
- spin_unlock(&dev->lock);
+ spin_unlock(&dev->kvm->ring_lock);
return 0;
}
@@ -83,6 +85,8 @@
{
struct kvm_coalesced_mmio_dev *dev = to_mmio(this);
+ list_del(&dev->list);
+
kfree(dev);
}
@@ -93,7 +97,6 @@
int kvm_coalesced_mmio_init(struct kvm *kvm)
{
- struct kvm_coalesced_mmio_dev *dev;
struct page *page;
int ret;
@@ -101,31 +104,18 @@
page = alloc_page(GFP_KERNEL | __GFP_ZERO);
if (!page)
goto out_err;
+
+ ret = 0;
kvm->coalesced_mmio_ring = page_address(page);
- ret = -ENOMEM;
- dev = kzalloc(sizeof(struct kvm_coalesced_mmio_dev), GFP_KERNEL);
- if (!dev)
- goto out_free_page;
- spin_lock_init(&dev->lock);
- kvm_iodevice_init(&dev->dev, &coalesced_mmio_ops);
- dev->kvm = kvm;
- kvm->coalesced_mmio_dev = dev;
+ /*
+ * We're using this spinlock to sync access to the coalesced ring.
+ * The list doesn't need it's own lock since device registration and
+ * unregistration should only happen when kvm->slots_lock is held.
+ */
+ spin_lock_init(&kvm->ring_lock);
+ INIT_LIST_HEAD(&kvm->coalesced_zones);
- mutex_lock(&kvm->slots_lock);
- ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, &dev->dev);
- mutex_unlock(&kvm->slots_lock);
- if (ret < 0)
- goto out_free_dev;
-
- return ret;
-
-out_free_dev:
- kvm->coalesced_mmio_dev = NULL;
- kfree(dev);
-out_free_page:
- kvm->coalesced_mmio_ring = NULL;
- __free_page(page);
out_err:
return ret;
}
@@ -139,51 +129,50 @@
int kvm_vm_ioctl_register_coalesced_mmio(struct kvm *kvm,
struct kvm_coalesced_mmio_zone *zone)
{
- struct kvm_coalesced_mmio_dev *dev = kvm->coalesced_mmio_dev;
+ int ret;
+ struct kvm_coalesced_mmio_dev *dev;
+
+ dev = kzalloc(sizeof(struct kvm_coalesced_mmio_dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ kvm_iodevice_init(&dev->dev, &coalesced_mmio_ops);
+ dev->kvm = kvm;
+ dev->zone = *zone;
+
+ mutex_lock(&kvm->slots_lock);
+ ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, zone->addr,
+ zone->size, &dev->dev);
+ if (ret < 0)
+ goto out_free_dev;
+ list_add_tail(&dev->list, &kvm->coalesced_zones);
+ mutex_unlock(&kvm->slots_lock);
+
+ return ret;
+
+out_free_dev:
+ mutex_unlock(&kvm->slots_lock);
+
+ kfree(dev);
if (dev == NULL)
return -ENXIO;
- mutex_lock(&kvm->slots_lock);
- if (dev->nb_zones >= KVM_COALESCED_MMIO_ZONE_MAX) {
- mutex_unlock(&kvm->slots_lock);
- return -ENOBUFS;
- }
-
- dev->zone[dev->nb_zones] = *zone;
- dev->nb_zones++;
-
- mutex_unlock(&kvm->slots_lock);
return 0;
}
int kvm_vm_ioctl_unregister_coalesced_mmio(struct kvm *kvm,
struct kvm_coalesced_mmio_zone *zone)
{
- int i;
- struct kvm_coalesced_mmio_dev *dev = kvm->coalesced_mmio_dev;
- struct kvm_coalesced_mmio_zone *z;
-
- if (dev == NULL)
- return -ENXIO;
+ struct kvm_coalesced_mmio_dev *dev, *tmp;
mutex_lock(&kvm->slots_lock);
- i = dev->nb_zones;
- while (i) {
- z = &dev->zone[i - 1];
-
- /* unregister all zones
- * included in (zone->addr, zone->size)
- */
-
- if (zone->addr <= z->addr &&
- z->addr + z->size <= zone->addr + zone->size) {
- dev->nb_zones--;
- *z = dev->zone[dev->nb_zones];
+ list_for_each_entry_safe(dev, tmp, &kvm->coalesced_zones, list)
+ if (coalesced_mmio_in_range(dev, zone->addr, zone->size)) {
+ kvm_io_bus_unregister_dev(kvm, KVM_MMIO_BUS, &dev->dev);
+ kvm_iodevice_destructor(&dev->dev);
}
- i--;
- }
mutex_unlock(&kvm->slots_lock);
diff --git a/virt/kvm/coalesced_mmio.h b/virt/kvm/coalesced_mmio.h
index 8a5959e..b280c20 100644
--- a/virt/kvm/coalesced_mmio.h
+++ b/virt/kvm/coalesced_mmio.h
@@ -12,14 +12,13 @@
#ifdef CONFIG_KVM_MMIO
-#define KVM_COALESCED_MMIO_ZONE_MAX 100
+#include <linux/list.h>
struct kvm_coalesced_mmio_dev {
+ struct list_head list;
struct kvm_io_device dev;
struct kvm *kvm;
- spinlock_t lock;
- int nb_zones;
- struct kvm_coalesced_mmio_zone zone[KVM_COALESCED_MMIO_ZONE_MAX];
+ struct kvm_coalesced_mmio_zone zone;
};
int kvm_coalesced_mmio_init(struct kvm *kvm);
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index 73358d2..f59c1e8 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -586,7 +586,8 @@
kvm_iodevice_init(&p->dev, &ioeventfd_ops);
- ret = kvm_io_bus_register_dev(kvm, bus_idx, &p->dev);
+ ret = kvm_io_bus_register_dev(kvm, bus_idx, p->addr, p->length,
+ &p->dev);
if (ret < 0)
goto unlock_fail;
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 8df1ca1..3eed61e 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -394,7 +394,8 @@
kvm_iodevice_init(&ioapic->dev, &ioapic_mmio_ops);
ioapic->kvm = kvm;
mutex_lock(&kvm->slots_lock);
- ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, &ioapic->dev);
+ ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, ioapic->base_address,
+ IOAPIC_MEM_LENGTH, &ioapic->dev);
mutex_unlock(&kvm->slots_lock);
if (ret < 0) {
kvm->arch.vioapic = NULL;
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index 967aba1..d5f3b8d 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -232,12 +232,12 @@
{
int r;
- if (!iommu_found()) {
+ if (!iommu_present(&pci_bus_type)) {
printk(KERN_ERR "%s: iommu not found\n", __func__);
return -ENODEV;
}
- kvm->arch.iommu_domain = iommu_domain_alloc();
+ kvm->arch.iommu_domain = iommu_domain_alloc(&pci_bus_type);
if (!kvm->arch.iommu_domain)
return -ENOMEM;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index aefdda3..d9cfb78 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -47,6 +47,8 @@
#include <linux/srcu.h>
#include <linux/hugetlb.h>
#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/bsearch.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -2391,24 +2393,92 @@
int i;
for (i = 0; i < bus->dev_count; i++) {
- struct kvm_io_device *pos = bus->devs[i];
+ struct kvm_io_device *pos = bus->range[i].dev;
kvm_iodevice_destructor(pos);
}
kfree(bus);
}
+int kvm_io_bus_sort_cmp(const void *p1, const void *p2)
+{
+ const struct kvm_io_range *r1 = p1;
+ const struct kvm_io_range *r2 = p2;
+
+ if (r1->addr < r2->addr)
+ return -1;
+ if (r1->addr + r1->len > r2->addr + r2->len)
+ return 1;
+ return 0;
+}
+
+int kvm_io_bus_insert_dev(struct kvm_io_bus *bus, struct kvm_io_device *dev,
+ gpa_t addr, int len)
+{
+ if (bus->dev_count == NR_IOBUS_DEVS)
+ return -ENOSPC;
+
+ bus->range[bus->dev_count++] = (struct kvm_io_range) {
+ .addr = addr,
+ .len = len,
+ .dev = dev,
+ };
+
+ sort(bus->range, bus->dev_count, sizeof(struct kvm_io_range),
+ kvm_io_bus_sort_cmp, NULL);
+
+ return 0;
+}
+
+int kvm_io_bus_get_first_dev(struct kvm_io_bus *bus,
+ gpa_t addr, int len)
+{
+ struct kvm_io_range *range, key;
+ int off;
+
+ key = (struct kvm_io_range) {
+ .addr = addr,
+ .len = len,
+ };
+
+ range = bsearch(&key, bus->range, bus->dev_count,
+ sizeof(struct kvm_io_range), kvm_io_bus_sort_cmp);
+ if (range == NULL)
+ return -ENOENT;
+
+ off = range - bus->range;
+
+ while (off > 0 && kvm_io_bus_sort_cmp(&key, &bus->range[off-1]) == 0)
+ off--;
+
+ return off;
+}
+
/* kvm_io_bus_write - called under kvm->slots_lock */
int kvm_io_bus_write(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
int len, const void *val)
{
- int i;
+ int idx;
struct kvm_io_bus *bus;
+ struct kvm_io_range range;
+
+ range = (struct kvm_io_range) {
+ .addr = addr,
+ .len = len,
+ };
bus = srcu_dereference(kvm->buses[bus_idx], &kvm->srcu);
- for (i = 0; i < bus->dev_count; i++)
- if (!kvm_iodevice_write(bus->devs[i], addr, len, val))
+ idx = kvm_io_bus_get_first_dev(bus, addr, len);
+ if (idx < 0)
+ return -EOPNOTSUPP;
+
+ while (idx < bus->dev_count &&
+ kvm_io_bus_sort_cmp(&range, &bus->range[idx]) == 0) {
+ if (!kvm_iodevice_write(bus->range[idx].dev, addr, len, val))
return 0;
+ idx++;
+ }
+
return -EOPNOTSUPP;
}
@@ -2416,19 +2486,33 @@
int kvm_io_bus_read(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
int len, void *val)
{
- int i;
+ int idx;
struct kvm_io_bus *bus;
+ struct kvm_io_range range;
+
+ range = (struct kvm_io_range) {
+ .addr = addr,
+ .len = len,
+ };
bus = srcu_dereference(kvm->buses[bus_idx], &kvm->srcu);
- for (i = 0; i < bus->dev_count; i++)
- if (!kvm_iodevice_read(bus->devs[i], addr, len, val))
+ idx = kvm_io_bus_get_first_dev(bus, addr, len);
+ if (idx < 0)
+ return -EOPNOTSUPP;
+
+ while (idx < bus->dev_count &&
+ kvm_io_bus_sort_cmp(&range, &bus->range[idx]) == 0) {
+ if (!kvm_iodevice_read(bus->range[idx].dev, addr, len, val))
return 0;
+ idx++;
+ }
+
return -EOPNOTSUPP;
}
/* Caller must hold slots_lock. */
-int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx,
- struct kvm_io_device *dev)
+int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
+ int len, struct kvm_io_device *dev)
{
struct kvm_io_bus *new_bus, *bus;
@@ -2440,7 +2524,7 @@
if (!new_bus)
return -ENOMEM;
memcpy(new_bus, bus, sizeof(struct kvm_io_bus));
- new_bus->devs[new_bus->dev_count++] = dev;
+ kvm_io_bus_insert_dev(new_bus, dev, addr, len);
rcu_assign_pointer(kvm->buses[bus_idx], new_bus);
synchronize_srcu_expedited(&kvm->srcu);
kfree(bus);
@@ -2464,9 +2548,13 @@
r = -ENOENT;
for (i = 0; i < new_bus->dev_count; i++)
- if (new_bus->devs[i] == dev) {
+ if (new_bus->range[i].dev == dev) {
r = 0;
- new_bus->devs[i] = new_bus->devs[--new_bus->dev_count];
+ new_bus->dev_count--;
+ new_bus->range[i] = new_bus->range[new_bus->dev_count];
+ sort(new_bus->range, new_bus->dev_count,
+ sizeof(struct kvm_io_range),
+ kvm_io_bus_sort_cmp, NULL);
break;
}
